WorldWideScience

Sample records for vertical alveolar ridge

  1. Combined use of alveolar distraction osteogenesis and segmental osteotomy in anterior vertical ridge augmentation.

    Science.gov (United States)

    Öncü, Elif; Isik, Kubilay; Alaaddinoğlu, E Emine; Uçkan, Sina

    2015-01-01

    Vertical defects of the anterioral veolar ridge are challenging cases in implant dentistry. Various techniques, such as onlay bone grafting, segmental osteotomy (SO) oral veolar distraction osteogenesis (ADO), have been suggested to manage those situations. ADO has an advantage of being capable of enhancing both hard and soft tissue simultaneously. One of the possible complications of ADO is rotation ortilting the transport segment (TS). In this report, we present a 30-year old woman who had a severe anterior vertical deficiency. ADO was started to manage the case, but advancement of the TS lagged on the left side and the segment rotated. A SO was planned and the lagged side was corrected. Two years after the surgery, hard and soft tissue gains were found to be preserved. Vertical alveolar bone deficiencies are challenging cases for dental implantology. Alveolar DO promotes soft tissue along with hard tissue, and the bone regeneration process and shows lower infection rates and greater stability over the long term. However, the technique has some disadvantages and can lead to complications, such as breaking of the distraction device, nerve injury or paresthesia, fracture of transport bone, hematoma, wound dehiscence, severe bleeding, and even jaw fractures. Deviation of the TS from the distraction path is another undesired situation. The rigidity of the device, the width of the mucosa, the volume of the transport and anchor segments, and the amount of augmentation can affect vector deviation. We suggest that SO can be used in similar cases in which TS could not be distracted on a straight vector line. Copyright © 2015. Published by Elsevier Ltd.

  2. Regeneración ósea guiada para el aumento vertical del reborde alveolar Guided osseous regeneration for the vertical augmentation of the alveolar ridge

    Directory of Open Access Journals (Sweden)

    CE Nappe

    2013-04-01

    Full Text Available Se considera como aumento óseo vertical, cualquier técnica que apunte a crear una mayor altura del reborde alveolar. A inicios de la década de los 90’s se empezó a utilizar la regeneración ósea guiada (ROG en mandíbulas atróficas, con el fin de permitir la instalación de implantes óseointegrados. Con el fin de evaluar y exponer parte de la evidencia disponible en la actualidad, con respecto a la ROG para aumento óseo vertical, se realizó la siguiente revisión bibliográfica.Any technique aimed to improve the alveolar ridge height is considered as a vertical bone augmentation procedure. In the early 90’s guided bone regeneration (GBR procedures began to be used in atrophic mandibles to allow the installation of osseointegrated dental implants. The following bibliographic review was made with the purpose of evaluating and exposing part of the available evidence at present in this field.

  3. Effect of slow forced eruption on the vertical levels of the interproximal bone and papilla and the width of the alveolar ridge.

    Science.gov (United States)

    Kwon, Eun-Young; Lee, Ju-Youn; Choi, Jeomil

    2016-11-01

    Forced eruption has been proposed for the reconstruction of deficient bone and soft tissue. The aim of this study was to examine the changes in the alveolar ridge width and the vertical levels of the interproximal bone and papilla following forced eruption. Patients whose hopeless maxillary anterior teeth were expected to undergo severe bone resorption and soft tissue recession upon extraction were recruited. In addition, patients whose maxillary anterior teeth required forced eruption for restoration due to tooth fracture or dental caries were included. Before and after forced eruption, the interproximal bone height was measured by radiographic analysis, and changes in the alveolar ridge width and the interproximal papilla height were measured with an acrylic stent. This prospective study demonstrated that the levels of the interproximal alveolar bone and papilla were significantly increased by 1.36 mm and 1.09 mm, respectively, in the vertical direction. However, the alveolar ridge width was significantly reduced by an average of 0.67 mm in the buccolingual direction. The changes in the level of the interproximal alveolar bone and papilla were positively correlated. Although the levels of the interproximal bone and papilla were significantly increased, the alveolar ridge width was significantly decreased following forced eruption. There was a modest positive and significant correlation between the changes in the height of the interproximal alveolar bone and the papilla. Based on our findings, modification of vertical forced eruption should be considered when augmentation of the alveolar ridge width is required.

  4. Biomaterial shell bending with 3D-printed templates in vertical and alveolar ridge augmentation: a technical note.

    Science.gov (United States)

    Draenert, Florian G; Gebhart, Florian; Mitov, Gergo; Neff, Andreas

    2017-06-01

    Alveolar ridge and vertical augmentations are challenging procedures in dental implantology. Even material blocks with an interconnecting porous system are never completely resorbed. Shell techniques combined with autologous bone chips are therefore the gold standard. Using biopolymers for these techniques is well documented. We applied three-dimensional (3-D) techniques to create an individualized bending model for the adjustment of a plane biopolymer membrane made of polylactide. Two cases with a vertical alveolar ridge defect in the maxilla were chosen. The cone beam computed tomography data were processed with a 3-D slicer and the Autodesk Meshmixer to generate data about the desired augmentation result. STL data were used to print a bending model. A 0.2-mm poly-D, L-lactic acid membrane (KLS Matin Inc., Tuttlingen, Germany) was bended accordingly and placed into the defect via a tunnel approach in both cases. A mesh graft of autologous bone chips and hydroxylapatite material was augmented beneath the shell, which was fixed with osteosynthesis screws. The operative procedure was fast and without peri- or postoperative complications or complaints. The panoramic x-ray showed correct fitting of the material in the location. Bone quality at the time of implant placement was type II, resulting in good primary stability. A custom-made 3-D model for bending confectioned biomaterial pieces is an appropriate method for individualized adjustment in shell techniques. The advantages over direct printing of the biomaterial shell and products on the market, such as the Xyoss shell (Reoss Inc., Germany), include cost-efficiency and avoidance of regulatory issues. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. Regeneración ósea guiada para el aumento vertical del reborde alveolar Guided osseous regeneration for the vertical augmentation of the alveolar ridge

    OpenAIRE

    CE Nappe; CE Baltodano

    2013-01-01

    Se considera como aumento óseo vertical, cualquier técnica que apunte a crear una mayor altura del reborde alveolar. A inicios de la década de los 90’s se empezó a utilizar la regeneración ósea guiada (ROG) en mandíbulas atróficas, con el fin de permitir la instalación de implantes óseointegrados. Con el fin de evaluar y exponer parte de la evidencia disponible en la actualidad, con respecto a la ROG para aumento óseo vertical, se realizó la siguiente revisión bibliográfica.Any techniqu...

  6. Vertical Root Fracture: Preservation of the Alveolar Ridge Using Immediate Implants

    Directory of Open Access Journals (Sweden)

    Edmar de Oliveira Oya

    2014-01-01

    Full Text Available Teeth with vertical root fracture (VRF have complete or incomplete fractures that begin in the root and extend toward the occlusal surface. The most frequent causes of VRF originate from physical trauma, occlusal prematurity, inadequate endodontic treatment, and iatrogenic causes. Diagnose is difficult and delay can cause stomatognathic system problem. The purpose of this case report was to evaluate immediate implant placement after extraction of teeth with vertical root fracture. For the 1st case, the VRF in 1st left lower molar was confirmed during surgical flap and at the same time, the tooth was removed and immediate implant was placed. For the 2nd case, the VRF 1st left lower molar was confirmed during endodontic access and at the same appointment, the tooth was removed and the immediate implant is placed. Several studies have shown that immediate implants have similar success rates when compared with late implants. Consider that this approach is a safe procedure with favorable prognosis. In cases of VRF, the main factor to be considered is the presence of adequate bone support and immediate implants can preserve the vertical bone height, adding the fact that good patient compliance reduces the number of surgical interventions and promotes the functionality of stomatognathic system.

  7. Alveolar ridge augmentation by osteoinduction in rats

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1990-01-01

    The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were...

  8. Alveolar Ridge Split Technique Using Piezosurgery with Specially Designed Tips

    Directory of Open Access Journals (Sweden)

    Alessandro Moro

    2017-01-01

    Full Text Available The treatment of patients with atrophic ridge who need prosthetic rehabilitation is a common problem in oral and maxillofacial surgery. Among the various techniques introduced for the expansion of alveolar ridges with a horizontal bone deficit is the alveolar ridge split technique. The aim of this article is to give a description of some new tips that have been specifically designed for the treatment of atrophic ridges with transversal bone deficit. A two-step piezosurgical split technique is also described, based on specific osteotomies of the vestibular cortex and the use of a mandibular ramus graft as interpositional graft. A total of 15 patients were treated with the proposed new tips by our department. All the expanded areas were successful in providing an adequate width and height to insert implants according to the prosthetic plan and the proposed tips allowed obtaining the most from the alveolar ridge split technique and piezosurgery. These tips have made alveolar ridge split technique simple, safe, and effective for the treatment of horizontal and vertical bone defects. Furthermore the proposed piezosurgical split technique allows obtaining horizontal and vertical bone augmentation.

  9. Complications with allogeneic, cancellous bone blocks in vertical alveolar ridge augmentation: prospective clinical case study and review of the literature.

    Science.gov (United States)

    Draenert, Florian G; Kämmerer, Peer W; Berthold, Michael; Neff, Andreas

    2016-08-01

    Vertical bone augmentation in dental implantology is an indication for cancellous allogeneic bone blocks (ABB). However, these materials may lead to adverse reactions, which are known well in orthopedics but rarely published. Therefore, in this study, we performed an evaluation of the use of ABB in vertical bone augmentation in clinical dental implantology. The prospective clinical study included 20 cases with vertical augmentation using ABB and subsequent or simultaneous placement of implants in the lateral maxilla and mandible. Follow-up included panoramic radiography, tissue healing, and peri-implantitis. Because of the limited number of patients, the report was planned to be descriptive only. Loss of ABB or peri-implantitis of more than 30% of the intraosseous implant length was deemed to indicate failure. The study was cancelled after six cases because of an unexpectedly high number of complications (5 of 6; 83%). The average surveillance time was 1460 days. Three types of unsatisfying outcome were observed: type I, early complete loss of the augmentation with soft tissue defects after 3 to 8 weeks (n = 2); type II, early soft tissue maceration (up to 8 weeks) without loss of coverage and complete early bone healing with later peri-implantitis and bone loss after prosthetic loading (6 months or later; n = 2); and type III, complication-free bone healing with subsequent peri-implantitis after prosthetic loading (6 months or later; n = 1). Complications were observed in vertical augmentation with ABB and implant placement. After careful consideration, literature data were found to support these results and also suggest that tissue level implants may be advantageous in vertical bone augmentation with ABB. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. The structural aspects of the flabby ridge or alveolar fibrosis.

    OpenAIRE

    Thevissen, E; VANSTEENBERGHE, D; Lambrecht, Johan; CREEMERS, Julia; Vandenabeele, Frank

    1997-01-01

    A flabby ridge or alveolar fibrosis is a dcnture-induced change of the oral mucosa. The flabby ridge originates when parts of the alveolar ridge becomes resorbed duc to excessive occlusal trauma on she denture in the affected area. In this case dlsc oral mucosa at the level of the flabby ridgc was studied using light microscopy, electron microscopy and inununohaislochemistry. The structures were compared with the normal oral mucosa of the maxilla. The flabby ridge was surgic...

  11. Alveolar ridge preservation and biologic width management for ...

    African Journals Online (AJOL)

    Alveolar bone atrophy is a chronically progressive, irreversible process which results in bone loss in both the buccal, lingual and apico-coronal region. Without bone preservation measures, bone resorption is experienced and continues for life. Preservation of alveolar ridge is indicated when a tooth-supported fixed partial ...

  12. Alveolar ridge augmentation by osteoinductive materials in goats

    DEFF Research Database (Denmark)

    Pinholt, E M; Haanaes, H R; Roervik, M

    1992-01-01

    The purpose of the present study was to determine whether alveolar ridge augmentation could be induced in goats. In 12 male goats allogenic, demineralized, and lyophilized dentin or bone was implanted subperiosteally on the buccal sides of the natural edentulous regions of the alveolar process of...... of the mandible. Light microscopic evaluation revealed fibrous encapsulation, a few multinuclear giant cells, little inflammatory reaction, and no osteoinduction. It was concluded that no osteoinduction took place in goats....

  13. Postextraction Alveolar Ridge Preservation: Biological Basis and Treatments

    Directory of Open Access Journals (Sweden)

    Giorgio Pagni

    2012-01-01

    Full Text Available Following tooth extraction, the alveolar ridge undergoes an inevitable remodeling process that influences implant therapy of the edentulous area. Socket grafting is a commonly adopted therapy for the preservation of alveolar bone structures in combination or not with immediate implant placement although the biological bases lying behind this treatment modality are not fully understood and often misinterpreted. This review is intended to clarify the literature support to socket grafting in order to provide practitioners with valid tools to make a conscious decision of when and why to recommend this therapy.

  14. Combined soft and hard tissue augmentation for a localized alveolar ridge defect

    OpenAIRE

    Ritu Rana; Srinivas Sulugodu Ramachandra; Manesh Lahori; Reetika Singhal; K D Jithendra

    2013-01-01

    Ideal alveolar ridge width and height allows placement of a natural appearing pontic, which provides maintenance of a plaque-free environment. The contour of a partially edentulous ridge should be thoroughly evaluated before a fixed partial denture is undertaken. Localized alveolar ridge defect refers to a volumetric deficit of the limited extent of bone and soft-tissue within the alveolar process. These ridge defects can be corrected by hard tissue and/or soft-tissue augmentation. A 30-year-...

  15. Alveolar ridge augmentation in rats by Bio-Oss

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1991-01-01

    The purpose of the study was to examine if Bio-Oss initiated osteoinduction or osteoconduction when implanted into rats. Sintered and unsintered granules of the anorganic bovine bone Bio-Oss was implanted subperiosteally for alveolar ridge augmentation purposes and heterotopically in the abdominal...... muscles of rats. Light microscopic evaluation revealed no osteoinduction or osteoconduction in connection with sintered or unsintered Bio-Oss. A foreign body reaction was observed around both forms....

  16. Alveolar ridge reconstruction with titanium meshes: A systematic review of the literature

    Science.gov (United States)

    Rasia dal Polo, Marco; Rancitelli, Davide; Beretta, Mario; Maiorana, Carlo

    2014-01-01

    Alveolar bone regeneration by means of titanium meshes is a widespread procedure, however to date, only few relevant studies were reported in literature concerning this technique. Consequently, the aim of the present systematic review was to analyze the reliability of the titanium mesh as a barrier, in conjunction with horizontal and vertical ridge reconstruction for implant placement purposes. A total of 17 articles complying with the inclusion and exclusion criteria were reviewed. Three outcome variables were defined: a) horizontal and vertical bone regeneration obtained, b) complication rate, defined as the percentage of membrane exposures and c) evaluation of implant survival, success and failure rate.In regards to the vertical regeneration the mean was 4.91 mm (range: 2.56 - 8.6), while a mean of 4.36 mm (range: 3.75 - 5.65) was calculated for horizontal reconstruction. Considering the exposure rate, a mean of 16.1% was found, nevertheless, implant placement were placed in almost all of the sites. A mean success rate of 89,9%, a mean survival rate of 100% and a failure rate of 0% emerged from the data evaluation. A meta-analysis could not be performed due to the heterogeneity of the data, however the final results were comparable with those reported in case of bone regeneration obtained through other types of non-resorbable membranes. An advantage in favour of the titanium mesh was found in terms of bone loss after exposure, as implant placement was not jeopardized in almost all of the cases. It could be deduced that titanium meshes represented a reliable solution for alveolar ridge reconstruction. The clinical studies currently available in literature have shown the predictability of this technique in both lateral and vertical bone regeneration. Key words:Alveolar ridge reconstruction, bone atrophy, bone regeneration, dental implants, titanium mesh. PMID:25350597

  17. Bone grafting for alveolar ridge reconstruction. Review of 166 cases.

    Science.gov (United States)

    Salmen, Fued Samir; Oliveira, Marina Reis; Gabrielli, Marisa Aparecida Cabrini; Piveta, Ana Cláudia Gabrielli; Pereira, Valfrido Antonio; Gabrielli, Mario Francisco Real

    2017-01-01

    to investigate the predictive factors of failure in bone grafts for alveolar ridge augmentation and implant surgery. we reviewed the charts of 166 patients operated between 1995 and 2014. A total of 248 grafting procedures were performed. We submitted the data to the binomial test at 5% significance. grafts to gain width of the alveolar ridge (65.32%) were more frequent than sinus lifting (pimplants installed in the grafted areas, of which only 4.83% were lost. The number of implants lost (4.51%) in areas of onlay grafts was not statistically higher than those placed after sinus lifting (2.63%, pimplants (pdental implants in the maxilla and in patients over 40 years of age. investigar os fatores preditivos de falhas em enxertos ósseos para aumento do rebordo alveolar e cirurgia de implantes. os prontuários de 166 pacientes, operados entre 1995 e 2014, foram revistos. Um total de 248 enxertos foi realizado. Os dados foram submetidos ao teste binomial a 5% de significância. os enxertos para ganho em espessura do rebordo alveolar (65,32%) foram mais frequentes do que levantamentos de seio maxilar (pimplantes nas áreas enxertadas e apenas 4,83% perdidos. O número de implantes perdidos (4,51%) em áreas de enxertos em bloco não foi estatisticamente maior do que na área de seios maxilares enxertados (2,63%) (pimplantes perdidos (pimplantes dentários realizados em maxila e em pacientes com mais de 40 anos de idade.

  18. Bone grafting for alveolar ridge reconstruction. Review of 166 cases.

    Directory of Open Access Journals (Sweden)

    FUED SAMIR SALMEN

    Full Text Available ABSTRACT Objective: to investigate the predictive factors of failure in bone grafts for alveolar ridge augmentation and implant surgery. Methods: we reviewed the charts of 166 patients operated between 1995 and 2014. A total of 248 grafting procedures were performed. We submitted the data to the binomial test at 5% significance. Results: grafts to gain width of the alveolar ridge (65.32% were more frequent than sinus lifting (p<0.0001 and the number of grafts to the posterior maxilla (48.8% was greater than in other regions (p<0.01; 6.04% of the grafts were lost. The losses in anterior (p<0.0309 and posterior (p<0.0132 maxilla were higher than in the mandible. There were 269 implants installed in the grafted areas, of which only 4.83% were lost. The number of implants lost (4.51% in areas of onlay grafts was not statistically higher than those placed after sinus lifting (2.63%, p<0.2424. Losses were greater in the anterior (53.85% and posterior (38.46% maxilla than in the mandible (p<0.031. Regarding patients' age, 76.92% of the lost grafts (p<0.006 and 80% of the lost implants (p<0.001 were installed in patients over 40 years. Conclusion: failure rate was higher both for grafts and dental implants in the maxilla and in patients over 40 years of age.

  19. Reconstruction of severely atrophied alveolar ridges with calvarial onlay bone grafts and dental implants.

    Science.gov (United States)

    Mertens, Christian; Steveling, Helmut G; Seeberger, Robin; Hoffmann, Jürgen; Freier, Kolja

    2013-10-01

    Severely atrophied alveolar ridges are most commonly reconstructed with free autologous bone grafts from the iliac crest. The use of these grafts, however, is frequently associated with bone resorption as possible late complication after implant surgery and prosthetic loading. Other donor sites, especially intraoral donor sites, show limited availability. The aim of this present study was to evaluate the clinical and radiographical outcome of alveolar ridge reconstruction with bone from the calvarium and subsequent implant rehabilitation. Reconstruction was performed by using calvarial split grafts in case of severe and complex alveolar ridge defects induced by trauma or bone atrophy. Fifteen patients were treated at 19 different intraoral recipient sites (15 sites in the maxilla, four in the mandible). Autologous block grafts were used for combined vertical and horizontal grafting. After a 3-month healing period, patients received dental implants. A total of 99 dental implants (OsseoSpeed™, Astra Tech AB, Mölndal, Sweden) were inserted and left to heal in a submerged position for 3 months before the prosthetic implant-based rehabilitation was performed. No donor site complications occurred during or after surgery. At the intraoral recipient sites two infections occurred, leading to partial loss of the grafts. Implant placement, however, was possible in all cases. Two of 99 implants were lost in two patients prior to prosthetic loading. Patients were followed up clinically and radiographically for an average observation period of 28 months. Implant survival rate and success rates were 97.85 and 95.7%, respectively, and a minimal marginal bone loss was documented. The low morbidity at the donor sites and the good marginal bone stability in the reconstructed regions indicate that calvarial bone grafts represent a viable treatment alternative to grafts from the iliac crest. © 2011 Wiley Periodicals, Inc.

  20. Alveolar Ridge Preservation Using Xenogeneic Collagen Matrix and Bone Allograft

    Directory of Open Access Journals (Sweden)

    Andreas O. Parashis

    2014-01-01

    Full Text Available Alveolar ridge preservation (ARP has been shown to prevent postextraction bone loss. The aim of this report is to highlight the clinical, radiographic, and histological outcomes following use of a bilayer xenogeneic collagen matrix (XCM in combination with freeze-dried bone allograft (FDBA for ARP. Nine patients were treated after extraction of 18 teeth. Following minimal flap elevation and atraumatic extraction, sockets were filled with FDBA. The XCM was adapted to cover the defect and 2-3 mm of adjacent bone and flaps were repositioned. Healing was uneventful in all cases, the XCM remained in place, and any matrix exposure was devoid of further complications. Exposed matrix portions were slowly vascularized and replaced by mature keratinized tissue within 2-3 months. Radiographic and clinical assessment indicated adequate volume of bone for implant placement, with all planned implants placed in acceptable positions. When fixed partial dentures were placed, restorations fulfilled aesthetic demands without requiring further augmentation procedures. Histological and immunohistochemical analysis from 9 sites (4 patients indicated normal mucosa with complete incorporation of the matrix and absence of inflammatory response. The XCM + FDBA combination resulted in minimal complications and desirable soft and hard tissue therapeutic outcomes, suggesting the feasibility of this approach for ARP.

  1. Alveolar ridge augmentation by connective tissue grafting using a pouch method and modified connective tissue technique: A prospective study.

    Science.gov (United States)

    Agarwal, Ashish; Gupta, Narinder Dev

    2015-01-01

    Localized alveolar ridge defect may create physiological and pathological problems. Developments in surgical techniques have made it simpler to change the configuration of a ridge to create a more aesthetic and more easily cleansable shape. The purpose of this study was to compare the efficacy of alveolar ridge augmentation using a subepithelial connective tissue graft in pouch and modified connective tissue graft technique. In this randomized, double blind, parallel and prospective study, 40 non-smoker individuals with 40 class III alveolar ridge defects in maxillary anterior were randomly divided in two groups. Group I received modified connective tissue graft, while group II were treated with subepithelial connective tissue graft in pouch technique. The defect size was measured in its horizontal and vertical dimension by utilizing a periodontal probe in a stone cast at base line, after 3 months, and 6 months post surgically. Analysis of variance and Bonferroni post-hoc test were used for statistical analysis. A two-tailed P connective tissue graft proposed significantly more improvement as compare to connective tissue graft in pouch.

  2. Implants in reconstructed bone: a comparative study on the outcome of Straumann® tissue level and bone level implants placed in vertically deficient alveolar ridges treated by means of autogenous onlay bone grafts.

    Science.gov (United States)

    Chiapasco, Matteo; Casentini, Paolo; Zaniboni, Marco

    2014-02-01

    To evaluate: (1) the survival rate of Straumann® Tissue Level and Bone Level implants placed in atrophic edentulous jaws previously reconstructed by means of autogenous onlay bone grafts; (2) to compare peri-implant bone resorption values over time. From 2005 to 2010, 50 patients presenting with vertical or tridimensional defects of the edentulous ridges were treated with autogenous bone grafts. Three to 7 months afterward, 192 implants were placed (Group A: 97 Tissue Level implants; Group B: 95 Bone Level implants) in the reconstructed areas. After a further waiting period of 2 to 3 months, patients were rehabilitated with implant-supported fixed prostheses. The follow-up ranged from 12 to 68 months after the start of prosthetic loading (mean: 33 months). No implants were removed (survival rate: 100%), but in Group B 13 implants (8 placed in iliac grafts, 2 placed in ramus grafts, and 3 placed in calvarial grafts) presented peri-implant bone resorption values higher than those proposed by Albrektsson and colleagues. for successful implants: the overall implant success rate was then 100% for Group A and 86.8% for Group B. No prosthetic failures were recorded, thus leading to a 100% prostheses success rate. No significant differences were found between the two types of implants as far as implant survival rate is concerned, but results from this study seem to demonstrate that Tissue Level implants may present better long-term results in terms of peri-implant bone maintenance, as compared with Bone Level implants, when placed in reconstructed areas. © 2012 Wiley Periodicals, Inc.

  3. Bone Replacement Materials and Techniques Used for Achieving Vertical Alveolar Bone Augmentation

    Directory of Open Access Journals (Sweden)

    Zeeshan Sheikh

    2015-05-01

    Full Text Available Alveolar bone augmentation in vertical dimension remains the holy grail of periodontal tissue engineering. Successful dental implant placement for restoration of edentulous sites depends on the quality and quantity of alveolar bone available in all spatial dimensions. There are several surgical techniques used alone or in combination with natural or synthetic graft materials to achieve vertical alveolar bone augmentation. While continuously improving surgical techniques combined with the use of auto- or allografts provide the most predictable clinical outcomes, their success often depends on the status of recipient tissues. The morbidity associated with donor sites for auto-grafts makes these techniques less appealing to both patients and clinicians. New developments in material sciences offer a range of synthetic replacements for natural grafts to address the shortcoming of a second surgical site and relatively high resorption rates. This narrative review focuses on existing techniques, natural tissues and synthetic biomaterials commonly used to achieve vertical bone height gain in order to successfully restore edentulous ridges with implant-supported prostheses.

  4. Alveolar ridge augmentation by connective tissue grafting using a pouch method and modified connective tissue technique: A prospective study

    Directory of Open Access Journals (Sweden)

    Ashish Agarwal

    2015-01-01

    Full Text Available Background: Localized alveolar ridge defect may create physiological and pathological problems. Developments in surgical techniques have made it simpler to change the configuration of a ridge to create a more aesthetic and more easily cleansable shape. The purpose of this study was to compare the efficacy of alveolar ridge augmentation using a subepithelial connective tissue graft in pouch and modified connective tissue graft technique. Materials and Methods: In this randomized, double blind, parallel and prospective study, 40 non-smoker individuals with 40 class III alveolar ridge defects in maxillary anterior were randomly divided in two groups. Group I received modified connective tissue graft, while group II were treated with subepithelial connective tissue graft in pouch technique. The defect size was measured in its horizontal and vertical dimension by utilizing a periodontal probe in a stone cast at base line, after 3 months, and 6 months post surgically. Analysis of variance and Bonferroni post-hoc test were used for statistical analysis. A two-tailed P < 0.05 was considered to be statistically significant. Results: Mean values in horizontal width after 6 months were 4.70 ± 0.87 mm, and 4.05 ± 0.89 mm for group I and II, respectively. Regarding vertical heights, obtained mean values were 4.75 ± 0.97 mm and 3.70 ± 0.92 mm for group I and group II, respectively. Conclusion: Within the limitations of this study, connective tissue graft proposed significantly more improvement as compare to connective tissue graft in pouch.

  5. Hard and soft tissue changes following alveolar ridge preservation: a systematic review.

    Science.gov (United States)

    MacBeth, Neil; Trullenque-Eriksson, Anna; Donos, Nikolaos; Mardas, Nikos

    2017-08-01

    Two focused questions were addressed within this systematic review. Q1) What is the effect of alveolar ridge preservation on linear and volumetric alveolar site dimensions, keratinised measurements, histological characteristics and patient-based outcomes when compared to unassisted socket healing. Q2) What is the size effect of these outcomes in three different types of intervention (guided bone regeneration, socket grafting and socket seal). An electronic search (MEDLINE, EMBASE, Cochrane Central Register LILACS, Web of Science) and hand-search was conducted up to June 2015. Randomised controlled trials (RCT) and controlled clinical trials (CCT); with unassisted socket healing as controls: were eligible in the analysis for Q1. RCTs, CCTs and large prospective case series with or without an unassisted socket healing as control group were eligible in the analysis for Q2. Nine papers (8 RCTs and 1 CCTs) were included in the analysis for Q1 and 37 papers (29 RCTs, 7 CCTs and 1 case series) for Q2. The risk for bias was unclear or high in most of the studies. Q1: the standardised mean difference (SMD) in vertical mid-buccal bone height between ARP and a non-treated site was 0.739 mm (95% CI: 0.332 to 1.147). The SMD when proximal vertical bone height and horizontal bone width was compared was 0.796mm (95% CI: -1.228 to 0.364) and 1.198 mm (95% CI: -0.0374 to 2.433). Examination of ARP sites revealed significant variation in vital and trabecular bone percentages and keratinised tissue width and thickness. Adverse events were routinely reported, with three papers reporting a high level of complications in the test and control groups and two papers reporting greater risks associated with ARP. No studies reported on variables associated with the patient experience in either the test or the control group. Q2: A pooled effect reduction (PER) in mid-buccal alveolar ridge height of -0.467 mm (95% CI: -0.866 to -0.069) was recorded for GBR procedures and -0.157 mm (95% CI

  6. Combined soft and hard tissue augmentation for a localized alveolar ridge defect

    Directory of Open Access Journals (Sweden)

    Ritu Rana

    2013-01-01

    Full Text Available Ideal alveolar ridge width and height allows placement of a natural appearing pontic, which provides maintenance of a plaque-free environment. The contour of a partially edentulous ridge should be thoroughly evaluated before a fixed partial denture is undertaken. Localized alveolar ridge defect refers to a volumetric deficit of the limited extent of bone and soft-tissue within the alveolar process. These ridge defects can be corrected by hard tissue and/or soft-tissue augmentation. A 30-year-old male patient was referred to the Department of Periodontology for correction of Seibert′s Class III ridge defect in the lower anterior region. Granulation tissue/connective tissue present at the base of the defect was removed after elevation of full thickness flap. MucoMatrixX, an animal derived, collagen based soft-tissue graft was sutured to the labial flap and bone graft was placed into the defect. If a soft-tissue graft material could be used to replace the palatal grafts, then all the possible complications associated with donor site would be eliminated and above all periodontal plastic surgery and ridge augmentation would be better accepted by patients.

  7. Combined soft and hard tissue augmentation for a localized alveolar ridge defect.

    Science.gov (United States)

    Rana, Ritu; Ramachandra, Srinivas Sulugodu; Lahori, Manesh; Singhal, Reetika; Jithendra, K D

    2013-10-01

    Ideal alveolar ridge width and height allows placement of a natural appearing pontic, which provides maintenance of a plaque-free environment. The contour of a partially edentulous ridge should be thoroughly evaluated before a fixed partial denture is undertaken. Localized alveolar ridge defect refers to a volumetric deficit of the limited extent of bone and soft-tissue within the alveolar process. These ridge defects can be corrected by hard tissue and/or soft-tissue augmentation. A 30-year-old male patient was referred to the Department of Periodontology for correction of Seibert's Class III ridge defect in the lower anterior region. Granulation tissue/connective tissue present at the base of the defect was removed after elevation of full thickness flap. MucoMatrixX, an animal derived, collagen based soft-tissue graft was sutured to the labial flap and bone graft was placed into the defect. If a soft-tissue graft material could be used to replace the palatal grafts, then all the possible complications associated with donor site would be eliminated and above all periodontal plastic surgery and ridge augmentation would be better accepted by patients.

  8. Clinical and histologic evaluation of bone-replacement grafts in the treatment of localized alveolar ridge defects. Part 2: bioactive glass particulate.

    Science.gov (United States)

    Knapp, Charles I; Feuille, Frank; Cochran, David L; Mellonig, James T

    2003-04-01

    The purpose of this study was to evaluate the feasibility of using a bioactive alloplast and a physical barrier to augment localized alveolar ridge defects for the subsequent placement of dental implants. Twelve systemically healthy patients (aged 29 to 55 years) with inadequate dental alveolar ridge widths were selected for study. All patients completed initial therapy, which included scaling, root planing, and oral hygiene instruction. All ridge defects were augmented with a bioactive glass alloplast and a titanium-reinforced e-PTFE barrier. Vertical (height) and horizontal (width) hard tissue measurements were taken the day of ridge augmentation surgery (baseline) and at the 6-month reentry surgery. The change in ridge width varied from a loss of 1 mm to a gain of 4.5 mm, with a mean gain of 1.1 mm (P .08). Mean ridge width gain was 1.1 mm for both maxillary and mandibular sites. There was a loss in bone height of 0.3 mm from baseline. Four implants in four patients could not be placed because of inadequate ridge width augmentation. Histologic examination of the grafted sites revealed connective tissue encapsulation of most residual graft particles. In this study, bioactive glass particulate and an e-PTFE barrier did not consistently augment localized ridge defects for dental implant placement.

  9. Extensive augmentation of the alveolar ridge using autogenous calvarial split bone grafts for dental rehabilitation.

    Science.gov (United States)

    Iizuka, Tateyuki; Smolka, Wenko; Hallermann, Wock; Mericske-Stern, Regina

    2004-10-01

    Free autogenous iliac bone is the most commonly used graft material for an extensive alveolar ridge reconstruction. The application of iliac bone, however, is associated with problems, such as transplant loss resulting from postoperative infection and late bone resorption. A bone-graft material more suitable than iliac bone is therefore still needed. This paper describes a concept for alveolar-ridge reconstruction using calvarial split bone, and the related surgical techniques. Clinical and radiological follow-up examinations were undertaken to evaluate the potential benefit of calvarial split bone in alveolar-ridge reconstruction. Between 1999 and 2002, 13 patients with a mean age of 54 years (range 31-70 years) underwent surgery, seven patients in the maxilla and six in the mandible. In four cases, wound dehiscence occurred postoperatively. In one of these cases, the dehiscence was associated with a local infection. However, no bone transplants were lost. After a mean follow-up time of 19.6 months, bone resorption, measured radiologically, was minimal. Endosseous dental implants were successfully installed and maintained. Satisfactory prosthetic rehabilitation was achieved in all patients. Our preliminary experience suggests that calvarial split bone may be regarded as a promising alternative to autogenous iliac bone in connection with extensive augmentation of the alveolar ridge.

  10. The effect of therapeutic radiation on canine alveolar ridges augmented with hydroxylapatite

    DEFF Research Database (Denmark)

    Pinholt, E M; Kwon, P H

    1992-01-01

    The purpose of this investigation was to evaluate the effect of radiation on hydroxylapatite (HA) implanted subperiosteally for alveolar ridge augmentation in dogs. All bicuspids and molars were extracted from 16 dogs. After 6 weeks, nonporous HA granules were implanted subperiosteally...

  11. Mesiodistal dental movement toward remodeled edentulous alveolar ridge: Digital model assessment.

    Science.gov (United States)

    Herrera Sanches, Francyle Simões; Santos, Patrícia Bittencourt Dutra Dos; Ferreira, Marcos Cezar; Freitas, Karina Maria Salvatore; Henriques, José Fernando Castanha; Janson, Guilherme; Garib, Daniela

    2017-07-01

    The aims of this study were to compare the changes in posterior dental inclination and angulation, and the posterior tooth crown sizes and alveolar ridge thicknesses consequent to the orthodontic procedures of closing and opening of mandibular first molar edentulous spaces. The sample comprised 16 patients (4 men, 12 women) with an initial mean age of 34.17 years and unilateral or bilateral absence of mandibular permanent first molars. The space closure group (SCG) comprised 12 hemiarches with a mandibular first molar edentulous space varying from 2 to 7 mm, orthodontically treated with space closure. The space opening group (SOG) comprised 14 quadrants with a mandibular first molar edentulous space varying from 7.1 to 12 mm, orthodontically treated with space reopening for prosthetic replacement. Digital dental models were obtained before treatment and after space closure or opening, and posterior tooth angulation and inclination, cervico-occlusal crown height, and alveolar ridge thickness were evaluated. Interphase and intergroup comparisons were performed with dependent t tests and t tests, respectively (P SOG. The alveolar ridge thickness increased in the SCG and remained stable in the SOG. The only significant intergroup differences were that the second molar cervico-occlusal crown height and the alveolar ridge thickness increased in the SCG, and decreased and remained stable in the SOG. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  12. Histological Features and Biocompatibility of Bone and Soft Tissue Substitutes in the Atrophic Alveolar Ridge Reconstruction

    Directory of Open Access Journals (Sweden)

    Carlo Maiorana

    2016-01-01

    Full Text Available The reconstruction of the atrophic alveolar ridges for implant placement is today a common procedure in dentistry daily practice. The surgical reconstruction provides for the optimization of the supporting bone for the implants and a restoration of the amount of keratinized gingiva for esthetic and functional reasons. In the past, tissue regeneration has been performed with autogenous bone and free gingival or connective tissue grafts. Nowadays, bone substitutes and specific collagen matrix allow for a complete restoration of the atrophic ridge without invasive harvesting procedures. A maxillary reconstruction of an atrophic ridge by means of tissue substitutes and its histological features are then presented.

  13. Alveolar ridge augmentation by connective tissue grafting using a pouch method and modified connective tissue technique: A prospective study

    OpenAIRE

    Agarwal, Ashish; Gupta, Narinder Dev

    2015-01-01

    Background: Localized alveolar ridge defect may create physiological and pathological problems. Developments in surgical techniques have made it simpler to change the configuration of a ridge to create a more aesthetic and more easily cleansable shape. The purpose of this study was to compare the efficacy of alveolar ridge augmentation using a subepithelial connective tissue graft in pouch and modified connective tissue graft technique. Materials and Methods: In this randomized, double bl...

  14. Soft tissue expansion before vertical ridge augmentation: Inflatable silicone balloons or self-filling osmotic tissue expanders?

    Directory of Open Access Journals (Sweden)

    Prasad Vijayrao Dhadse

    2014-01-01

    Full Text Available Recent advances in periodontal plastic surgical procedures allow the clinician to reconstruct deficient alveolar ridges in more predictable ways than previously possible. Placement of implant/s in resorbed ridges poses numerous challenges to the clinician for successful esthetic and functional rehabilitation. The reconstruction frequently utilizes one or combination of periodontal plastic surgical procedures in conjunction with autogenous bone grafting, allogenic bone block grafting, ridge split techniques, distraction osteogenesis, or guided bone regeneration (GBR for most predictable outcomes. Current surgical modalities used in reconstruction of alveolar ridge (horizontal and/or vertical component often involve the need of flap transfer. Moreover, there is compromise in tissue integrity and color match owing to different surgical site and the tissue utilized is insufficient in quantity leading to post surgical graft exposition and/or loss of grafted bone. Soft tissue expansion (STE by implantation of inflatable silicone balloon or self filling osmotic tissue expanders before reconstructive surgery can overcome these disadvantages and certainly holds a promise for effective method for generation of soft tissue thereby achieving predictable augmentation of deficient alveolar ridges for the implant success. This article focuses and compares these distinct tissue expanders for their clinical efficacy of achieving excess tissue that predominantly seems to be prerequisite for ridge augmentation which can be reasonably followed by successful placement of endosseous fixtures.

  15. Soft tissue expansion before vertical ridge augmentation: Inflatable silicone balloons or self-filling osmotic tissue expanders?

    Science.gov (United States)

    Dhadse, Prasad Vijayrao; Yeltiwar, Ramareddy Krishnarao; Bhongade, Manohar Laxmanrao; Pendor, Sunil Dattuji

    2014-01-01

    Recent advances in periodontal plastic surgical procedures allow the clinician to reconstruct deficient alveolar ridges in more predictable ways than previously possible. Placement of implant/s in resorbed ridges poses numerous challenges to the clinician for successful esthetic and functional rehabilitation. The reconstruction frequently utilizes one or combination of periodontal plastic surgical procedures in conjunction with autogenous bone grafting, allogenic bone block grafting, ridge split techniques, distraction osteogenesis, or guided bone regeneration (GBR) for most predictable outcomes. Current surgical modalities used in reconstruction of alveolar ridge (horizontal and/or vertical component) often involve the need of flap transfer. Moreover, there is compromise in tissue integrity and color match owing to different surgical site and the tissue utilized is insufficient in quantity leading to post surgical graft exposition and/or loss of grafted bone. Soft tissue expansion (STE) by implantation of inflatable silicone balloon or self filling osmotic tissue expanders before reconstructive surgery can overcome these disadvantages and certainly holds a promise for effective method for generation of soft tissue thereby achieving predictable augmentation of deficient alveolar ridges for the implant success. This article focuses and compares these distinct tissue expanders for their clinical efficacy of achieving excess tissue that predominantly seems to be prerequisite for ridge augmentation which can be reasonably followed by successful placement of endosseous fixtures. PMID:25210255

  16. Alveolar ridge augmentation with the perforated and nonperforated bone grafts

    OpenAIRE

    Avila, Erica Dorigatti de [UNESP; Scarso Filho, José; de Oliveira Ramalho, Lizete Toledo; Real Gabrielli, Mario Francisco; Pereira Filho, Valfrido Antonio

    2014-01-01

    Purpose Autogenous bones are frequently used because of their lack of antigenicity, but good osteoconductive and osteoinductive properties. This study evaluated the biological behavior of perforated and nonperforated cortical block bone grafts. Methods Ten nonsmoking patients who required treatment due to severe resorption of the alveolar process and subsequent implant installation were included in the study. The inclusion criteria was loss of one or more teeth; the presence of atrophy of the...

  17. Hard and soft tissue changes around implants installed in regular-sized and reduced alveolar bony ridges. An experimental study in dogs.

    Science.gov (United States)

    Baffone, Gabriele; Lang, Niklaus P; Pantani, Fabio; Favero, Giovanni; Ferri, Mauro; Botticelli, Daniele

    2015-01-01

    To study bony and soft tissue changes at implants installed in alveolar bony ridges of different widths. In 6 Labrador dogs, the mandibular premolars and first molars were extracted, and a buccal defect was created in the left side at the third and fourth premolars by removing the buccal bone and the inter-radicular and interdental septa. Three months after tooth extraction, full-thickness mucoperiosteal flaps were elevated, and implants were installed, two at the reduced (test) and two at the regular-sized ridges (control). Narrow or wide abutments were affixed to the implants. After 3 months, biopsies were harvested, and ground sections prepared for histological evaluation. A higher vertical buccal bony crest resorption was found at the test (1.5 ± 0.7 mm and 1.0 ± 0.7 mm) compared to the control implants (1.0 ± 0.5 mm and 0.7 ± 0.4 mm), for both wide and narrow abutment sites. A higher horizontal alveolar resorption was identified at the control compared to the test implants. The difference was significant for narrow abutment sites. The peri-implant mucosa was more coronally positioned at the narrow abutment, in the test sites, while for the control sites, the mucosal adaptation was more coronal at the wide abutment sites. These differences, however, did not reach statistical significance. Implants installed in regular-sized alveolar ridges had a higher horizontal, but a lower vertical buccal bony crest resorption compared to implants installed in reduced alveolar ridges. Narrow abutments in reduced ridges as well as wide abutments in regular-sized ridges yielded less soft tissue recession compared to their counterparts. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  18. [Evaluation of alveolar ridge reconstruction and esthetic result following immediate implant].

    Science.gov (United States)

    Wang, Ying; Lin, Ye; Chen, Bo; Zhang, Yu; Di, Ping

    2016-02-18

    To evaluate the bone alteration subject to remodeling and analyze the esthetic result following immediate implant placement of incisors. In this study, 20 patients (13 women, 7 men) were involved, who needed implants for incisors of maxilla. The patients received 23 immediate implants totally. On the day of surgery and 6 months after the implants were placed, Cone beam CT (CBCT) was taken. The thickness of the alveolar ridge and the vertical change of marginal bone levels onthe mesial and distal aspects of theimplants were measured using the computer software (PlanmecaRomexis Viewer 3.6.0.R). The evaluation of esthetic result by labial convexity score (LCS) and papilla index score (PIS) were analyzed pre-operation and one year after the final crown was delivered. The statistics with paired-t test for the measurement data and Willcoxon test for rating data were done by SPSS 20.0. The survival rate in the two-year follow-up was 100%. The measuring point 1 (MP1), MP2, MP3 and MP4 (0, 2, 4, 6 mm apical to the implant platform, respectively) got significant alterations after 6 months of the follow-up. These differences were statistically significant (PAnkylos System and Replace System, respectively, and the difference was not statistical significant . The esthetic results were quite acceptable. Before treatment, 18 incisors rated 3 for LCS, and 2 incisors rated 4 for LCS;after final restoration, only 5 incisors rated 3 for LCS, and 14 incisors rated 2 for LCS. Before treatment, 15 incisors rated 3 for PIS; after final restoration, 13 incisors rated 3 for PIS. There was no statistically significant difference for the PIS pre-operation and 1 year after final restoration, while there was statistically significant negative change for LCS. Even following the proper surgical technique, the alveolar ridge wall still can't be maintained after immediate implant placed in fresh socket of incisors. The inter-dental papilla could be well maintained, while due to the remodeling of

  19. Alveolar ridge augmentation with the perforated and nonperforated bone grafts.

    Science.gov (United States)

    de Avila, Erica Dorigatti; Filho, José Scarso; de Oliveira Ramalho, Lizete Toledo; Real Gabrielli, Mario Francisco; Pereira Filho, Valfrido Antônio

    2014-02-01

    Autogenous bones are frequently used because of their lack of antigenicity, but good osteoconductive and osteoinductive properties. This study evaluated the biological behavior of perforated and nonperforated cortical block bone grafts. Ten nonsmoking patients who required treatment due to severe resorption of the alveolar process and subsequent implant installation were included in the study. The inclusion criteria was loss of one or more teeth; the presence of atrophy of the alveolar process with the indication of reconstruction procedures to allow rehabilitation with dental implants; and the absence of systemic disease, local infection, or inflammation. The patients were randomly divided into two groups based on whether they received a perforated (inner surface) or nonperforated graft. After a 6-month healing period, a biopsy was performed and osseointegrated implants were installed in the same procedure. Fibrous connective tissue was evident at the interface in patients who received nonperforated grafts. However, full union between the graft and host bed was visible in those who had received a perforated graft. We found that cortical inner side perforations at donor sites increased the surface area and opened the medullary cavity. Our results indicate an increased rate of graft incorporation in patients who received such perforated grafts.

  20. Clinical and histologic evaluation of bone-replacement grafts in the treatment of localized alveolar ridge defects. Part 1: Mineralized freeze-dried bone allograft.

    Science.gov (United States)

    Feuille, Frank; Knapp, Charles I; Brunsvold, Michael A; Mellonig, James T

    2003-02-01

    The purpose of this study was to evaluate the use of mineralized freeze-dried bone allograft (FDBA) in conjunction with a titanium-reinforced expanded polytetrafluoroethylene (TR e-PTFE) barrier in the treatment of localized alveolar ridge deficiencies prior to endosseous dental implant placement. Twelve patients (aged 23 to 65 years) requiring tooth replacement with ridge augmentation were recruited to participate in this study. During ridge augmentation surgery, measurements were made prior to grafting with FDBA plus a TR e-PTFE barrier. Six months later, ridge measurements were repeated, and suitability for implant placement was assessed. At each implant site, a biopsy was taken from the grafted site. The implants were placed and allowed to osseointegrate for 13 weeks prior to phase-two surgery. Clinical data analyzed were horizontal ridge width changes and vertical ridge height changes. Histologic evaluation revealed the formation of new bone and residual particles in each graft site at the time of implant placement Ten patients completed the study. The mean alveolar ridge width increased by 3.2 +/- 1.0 mm (P < .0005). Histomorphometric analysis revealed a range of new bone from 42.9% to 70.5%, with a mean of 47.6%. Graft particles remaining ranged from 29.5% to 57.1%, with a mean of 52.4%. The clinical and histologic findings of this study demonstrate that sites grafted with FDBA in conjunction with an e-PTFE barrier can provide a predictable way to augment deficient alveolar ridges prior to implant placement.

  1. Dimensional changes of the post extraction alveolar ridge, preserved with Leukocyte- and Platelet Rich Fibrin: A clinical pilot study

    OpenAIRE

    Anwandter, Andreas; Bohmann, Stephanie; Nally, Mauricio; Castro Sarda, Ana; Quirynen, Marc; Pinto, Nelson

    2016-01-01

    This clinical trial explored the clinical and radiographic dimensional changes of the alveolar ridge in the first 4 months after tooth extraction in combination with the application of Leukocyte- and Platelet Rich Fibrin (L-PRF).

  2. To what extent residual alveolar ridge can be preserved by implant? A systematic review

    OpenAIRE

    Khalifa, Ahmed Khalifa; Wada, Masahiro; Ikebe, Kazunori; Maeda, Yoshinobu

    2016-01-01

    Background It has been reported that the load for (or to) implant-supported restoration may lead to bone remodeling as bone resorption and/or formation. While many authors supported the process of bone resorption, others elaborated bone apposition and increasing bone density close and remote to implant body (or fixture). This may suggest the role of the implant to reserve alveolar ridge from physiologic/pathologic resorption. The aim of this systematic review was to predict to how extend dent...

  3. Alveolar Ridge Preservation Using Leukocyte and Platelet-Rich Fibrin: A Report of a Case

    OpenAIRE

    Mogammad Thabit Peck; Johan Marnewick; Lawrence Stephen

    2011-01-01

    In order for a dental implant to be restored optimally, it must be placed in an ideal anatomic position. However, this is not always possible, since physiological wound healing after tooth removal, often results in hard and soft tissue changes which ultimately compromises ideal implant placement. With the aim of minimising the need for tissue augmentation, several alveolar ridge preservation (ARP) techniques have been developed. These often require the use of grafting material and therefore i...

  4. Two-stage reconstruction of the severely deficient alveolar ridge: bone graft followed by alveolar distraction osteogenesis.

    Science.gov (United States)

    Rachmiel, A; Emodi, O; Aizenbud, D; Rachmiel, D; Shilo, D

    2018-01-01

    Distraction osteogenesis for the augmentation of severe alveolar bone deficiency has gained popularity during the past two decades. In cases where the vertical bone height is not sufficient to create a stable transport segment, performing alveolar distraction osteogenesis (ADO) is not possible. In these severe cases, a two-stage treatment protocol is suggested: onlay bone grafting followed by ADO. An iliac crest onlay bone graft followed by ADO was performed in 13 patients: seven in the mandible and six in the maxilla. Following ADO, endosseous implants and prosthetic restorations were placed. In all cases, the onlay bone graft resulted in inadequate height for implant placement, but allowed ADO to be performed. ADO was performed to a mean total vertical augmentation of 13.7mm. Fifty-two endosseous implants were placed. During a mean follow-up of 4.85 years, two implants failed, both during the first 6 months; the survival rate was 96.15%. In severe cases lacking the required bone for ADO, using an onlay bone graft as a first stage treatment increases the bone height thus allowing ADO to be performed. This article describes a safe and stable two-stage treatment modality for severely atrophic cases, resulting in sufficient bone for implant placement and correction of the inter-maxillary vertical relationship. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  5. To what extent residual alveolar ridge can be preserved by implant? A systematic review.

    Science.gov (United States)

    Khalifa, Ahmed Khalifa; Wada, Masahiro; Ikebe, Kazunori; Maeda, Yoshinobu

    2016-12-01

    It has been reported that the load for (or to) implant-supported restoration may lead to bone remodeling as bone resorption and/or formation. While many authors supported the process of bone resorption, others elaborated bone apposition and increasing bone density close and remote to implant body (or fixture). This may suggest the role of the implant to reserve alveolar ridge from physiologic/pathologic resorption. The aim of this systematic review was to predict to how extend dental implants can preserve the residual alveolar ridge based on previous clinical investigations. This systematic review based on the retrospective and prospective studies, randomized clinical trial, and case reports. The process of searching for proposed articles included PubMed, Ovid, and Web of Science databases, with specific inclusion and exclusion criterion. A total 2139 citations were identified. After expunging the repeated articles between databases and application of exclusion and inclusion criteria, 18 articles were found to meet the topic of this systematic review. Many of the articles reported bone preservation with implant-assisted restorations, and the rest denoted noticeable bone apposition. According to the published clinical studies, the behavior of bone remodeling around implant predicts a sort of residual alveolar bone preservation.

  6. Grafts for Ridge Preservation.

    Science.gov (United States)

    Jamjoom, Amal; Cohen, Robert E

    2015-08-07

    Alveolar ridge bone resorption is a biologic phenomenon that occurs following tooth extraction and cannot be prevented. This paper reviews the vertical and horizontal ridge dimensional changes that are associated with tooth extraction. It also provides an overview of the advantages of ridge preservation as well as grafting materials. A Medline search among English language papers was performed in March 2015 using alveolar ridge preservation, ridge augmentation, and various graft types as search terms. Additional papers were considered following the preliminary review of the initial search that were relevant to alveolar ridge preservation. The literature suggests that ridge preservation methods and augmentation techniques are available to minimize and restore available bone. Numerous grafting materials, such as autografts, allografts, xenografts, and alloplasts, currently are used for ridge preservation. Other materials, such as growth factors, also can be used to enhance biologic outcome.

  7. Grafts for Ridge Preservation

    Directory of Open Access Journals (Sweden)

    Amal Jamjoom

    2015-08-01

    Full Text Available Alveolar ridge bone resorption is a biologic phenomenon that occurs following tooth extraction and cannot be prevented. This paper reviews the vertical and horizontal ridge dimensional changes that are associated with tooth extraction. It also provides an overview of the advantages of ridge preservation as well as grafting materials. A Medline search among English language papers was performed in March 2015 using alveolar ridge preservation, ridge augmentation, and various graft types as search terms. Additional papers were considered following the preliminary review of the initial search that were relevant to alveolar ridge preservation. The literature suggests that ridge preservation methods and augmentation techniques are available to minimize and restore available bone. Numerous grafting materials, such as autografts, allografts, xenografts, and alloplasts, currently are used for ridge preservation. Other materials, such as growth factors, also can be used to enhance biologic outcome.

  8. Post traumatic immediate GBR: alveolar ridge preservation after a comminuted fracture of the anterior maxilla.

    Science.gov (United States)

    Kim, Yongsoo; Leem, Dae Ho

    2015-04-01

    Without a proper intervention, a crushed alveolar process fracture can cause significant dimensional changes on affected hard and soft tissue that lead to difficult circumstances for post traumatic bone augmentation and dental implant placement. We present herein the cases of immediate guided bone regeneration (GBR) for the maxillary anterior alveolar process with comminuted fracture. Shortly after the hospital visit, guided bone regeneration was conducted for three patients using only xenograft material and bone fragments from traumatic site, without an additional donor site. Resorbable collagen membrane was used on the bone graft site, and titanium mesh was also used if significant bone loss were expected. Radiographic evaluation 6 months after GBR confirmed that all three cases had sufficiently preserved alveolar bone which is clinically required for implant placement. Dental implant installation was carried out for two patients and no specific findings were noted in follow-up after the placement. In this method, additional operation sites for bone collection are not necessary and the number of surgical steps before implant placement can be reduced. Furthermore, this immediate intervention can effectively minimize the alveolar ridge shrinkage of anterior maxilla after injury. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Three-dimensional alteration of constricted alveolar ridge affected by root thrusting with and without open-flap decortication.

    Science.gov (United States)

    Hwang, Donghyun; Lee, Won-June; Kim, Kyung-A; Baek, Seung-Hak; Park, Young-Guk; Kim, Su-Jung

    2017-09-01

    To investigate the morphometric and histological alterations of the constricted alveolar ridge when affected by root thrusting with and without open-flap decortication. Eight beagles were divided into three groups: C, control without root thrusting; R, root thrusting only; RD, root thrusting with alveolar decortication. The ridge constriction model was prepared in 16 mandibular quadrants after extraction of the third premolars. Reciprocal root thrusting of the second and fourth premolars was performed toward the constricted ridge for 10 weeks, having a moment of 900 g-mm. Open-flap decortication was conducted on the constricted bone surface in group RD. Micro-CT-based histomorphometric analysis and trichrome-staining-based tissue fractional analysis were performed to evaluate morphometric and microstructural changes on the ridge. Group R revealed a higher percentage of bone volume (P decortication with root thrusting did not improve the volume or quality of the constricted ridge.

  10. Assessment of Temperature Rise and Time of Alveolar Ridge Splitting by Means of Er:YAG Laser, Piezosurgery, and Surgical Saw: An Ex Vivo Study

    Directory of Open Access Journals (Sweden)

    Jacek Matys

    2016-01-01

    Full Text Available The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles (n=60 of adult pigs, divided into 4 groups (n=15. Two vertical and one horizontal cut have been done in an alveolar ridge using Er:YAG laser with set power of 200 mJ (G1, 400 mJ (G2, piezosurgery unit (G3, and a saw (G4. The temperature was measured by K-type thermocouple. The highest temperature gradient was noted for piezosurgery on the buccal and lingual side of mandible. The temperature rises on the bone surface along with the increase of laser power. The lower time needed to perform ridge splitting was measured for a saw, piezosurgery, and Er:YAG laser with power of 400 mJ and 200 mJ, respectively. The temperature rise measured on the bone over 10°C and bone carbonization occurrence was not reported in all study groups. Piezosurgery, Er:YAG laser (200 mJ and 400 mJ, and surgical saw are useful and safe tools in ridge splitting surgery.

  11. Aumento del reborde alveolar residual mediante técnica de rollo Increase of residual alveolar ridge using roll technique

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Simancas Pallares

    2011-03-01

    Full Text Available La pérdida dentaria, asociada a factores sistémicos, patológicos y traumáticos, promueve el proceso de reabsorción ósea de los rebordes residuales y genera problemas funcionales, como la falta de estabilidad y retención de las prótesis dentarias removibles, y disturbios estéticos y psicológicos. Estos defectos varían en dependencia de la cantidad de pérdida ósea y de tejidos blandos que hayan alcanzado. En la actualidad son descritas diversas técnicas que permiten corregir estos defectos. Una de ellas es la técnica del rollo, la cual demuestra muy buenos resultados al aumentar el tamaño del reborde alveolar y disminuir los defectos estéticos que causa sobre todo en el sector anterior. El objetivo del presente artículo es describir el caso clínico de un paciente con pérdida ósea en el sector anterior, tipo III según Seibert, rehabilitado con prótesis parcial fija y sometido a un procedimiento quirúrgico con la técnica del rollo. Se alcanzaron los objetivos planteados y proporciona una mejoría estética así como una mejora en su calidad de vida. Se demostró que con esta técnica se obtienen resultados predecibles que devuelven la estética en zonas de alta exigencia por parte de los pacientes.Tooth loss associated with systemic factors, pathological and traumatic conditions, promotes the bone resorption of residual ridges, this, creates functional problems such as lack of stability and retention of removable dentures as well as aesthetic and psychological disturbances. These defects vary depending on the amount of bone loss and soft tissue they reach. At present there are described various techniques that can correct these defects. One of these is the roll technique which shows very good results by increasing the size of the alveolar ridge and decrease aesthetic defects in the anterior area of the maxilla. The aim of this article is to describe a case of a patient with Seibert bone loss type III, rehabilitated with

  12. Alveolar ridge preservation using resorbable bioactive ceramic composite: a histological study.

    Science.gov (United States)

    Al-Sabbagh, Mohanad; Burt, John; Barakat, Ahmed; Kutkut, Ahmad; El-Ghannam, Ahmed

    2013-07-01

    The purpose of this study was to histologically evaluate newly generated vital bone using porous granules of bioactive and resorbable silica-calcium phosphate nanocomposite (SCPC) in extraction sockets. Six patients with a non-restorable maxillary central incisor requiring extraction followed by implant placement participated in the study. Extraction sockets were grafted with granules of SCPC. After 6 months, a bone core sample was retrieved from the center of the healed socket for histologic analysis, and dental implants were placed. Alveolar bone width was clinically assessed immediately after tooth extraction and 6 months after bone grafting, at the time of implant placement. Alveolar bone height was radiographically assessed immediately after tooth extraction and 6 months after extraction. Histomorphometric analyses of sockets grafted with SCPC for 6 months revealed 46.8% +/- 14% new vital bone and 2.5% +/- 1.5% graft material remnants. In these sockets, the mean bone height resorption over the 6-month period of healing was 1.6 mm +/- 1.5 mm. The mean bone width resorption of 2 mm +/- 0.7 mm was found at the bone crest. The results of this study suggest that SCPC graft material reduces the amount of change in alveolar ridge dimensions after tooth extraction and facilitates the regeneration of new vital bone.

  13. Distracción osteogénica alveolar como método de aumento del reborde alveolar Alveolar osteogenic distraction as method to increase the alveolar ridge

    Directory of Open Access Journals (Sweden)

    Denia Morales Navarro

    2011-03-01

    , disadvantages and complications. A bibliographic review was made by database search of reference systems as MEDLINE and PubliMed using the descriptors "alveolar distraction" o "osteogenic distraction". The published bibliographic sources mainly over 5 years concluding that this technique is an excellent alternative for the bone and soft tissues formation in zones of alveolar atrophy including three stages: latency, distraction and consolidation; being a foreseeable method and with low rates of bone reabsorption compared to other techniques of increase of alveolar ridge. It has its main indication in implant therapy to provide bone volume. We must to individualize each case and to use the more appropriate method according the clinical and personal features of patient. A proper case selection and a better understand of technique are essential to achieve successful results by alveolar osteogenic distraction. In Cuba the alveolar distraction has been not much applied being necessary to expand the studies on this subject matter.

  14. Combination of Bone Graft and Resorbable Membrane for Alveolar Ridge Preservation: a Systematic Review, Meta-analysis and Trial Sequential Analysis.

    Science.gov (United States)

    Troiano, Giuseppe; Zhurakivska, Khrystyna; Lo Muzio, Lorenzo; Laino, Luigi; Cicciù, Marco; Lo Russo, Lucio

    2017-09-12

    Alveolar ridge preservation (ARP) techniques are aimed to reduce the resorption after tooth extraction. The combination of a graft material covered with a resorbable membrane represent one of the most common strategies performed in the clinical practice. The aim of this systematic review was to analyse evidence regarding potential benefits of ARP procedures performed with allogenic/xenogenic grafts in combination with a resorbable membrane coverage in comparison to a spontaneous healing. Electronic databases were screened independently by two authors in order to select studies suitable for inclusion in this revision. Horizontal Ridge Width Reduction (HRWR) and Vertical Ridge Height Reduction (VRHR) were investigated as primary outcomes and Volume Changes (VC) as secondary outcome. Meta-analysis was performed using the inverse of variance test with a random effect model. Adjustment for type I and II errors and analysis of the power of evidence was performed with Trial Sequential analysis (TSA). 7 studies met the inclusion criteria and were included in the quantitative synthesis. Meta-analysis revealed that the combination therapy resulted in a lower rate of resorption for both HRWR (-2.19 mm with 95% Confidence Interval (CI) [-2.67, -1.71]) and VRHR (-1.72 mm with 95% CI [-2.14, -1.30]). For VC no meta-analysis was performed due to insufficient data. Analysis of the power of the evidence performed with TSA, showed that the number of both studies and sockets analyzed is sufficient to validate such findings, despite the high rate of heterogeneity. The use of bone graft covered by a resorbable membrane is able to decrease the rate of alveolar ridge horizontal and vertical resorption after tooth extraction. The power and reliability of the evidences are strong enough to confirm the above-mentioned findings, despite the high rate of heterogeneity of included studies.

  15. Alveolar Ridge Preservation Using Leukocyte and Platelet-Rich Fibrin: A Report of a Case

    Directory of Open Access Journals (Sweden)

    Mogammad Thabit Peck

    2011-01-01

    Full Text Available In order for a dental implant to be restored optimally, it must be placed in an ideal anatomic position. However, this is not always possible, since physiological wound healing after tooth removal, often results in hard and soft tissue changes which ultimately compromises ideal implant placement. With the aim of minimising the need for tissue augmentation, several alveolar ridge preservation (ARP techniques have been developed. These often require the use of grafting material and therefore increase the risk of disease transmission. Leukocyte and platelet-rich fibrin (L-PRF is a newly developed platelet concentrate that is prepared from the patient's own blood. Clinical research has indicated that it improves wound healing and stimulates bone formation. We present a case where L-PRF was successfully used in an ARP procedure to facilitate implant placement in a compromised extraction socket.

  16. Comparison of alveolar ridge preservation method using three dimensional micro-computed tomographic analysis and two dimensional histometric evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Park, Young Seok; Kim, Sung Tae; Oh, Seung Hee; Park, Hee Jung; Lee, Sophia; Kim, Taeil; Lee, Young Kyu; Heo, Min Suk [School of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    2014-06-15

    This study evaluated the efficacy of alveolar ridge preservation methods with and without primary wound closure and the relationship between histometric and micro-computed tomographic (CT) data. Porcine hydroxyapatite with polytetrafluoroethylene membrane was implanted into a canine extraction socket. The density of the total mineralized tissue, remaining hydroxyapatite, and new bone was analyzed by histometry and micro-CT. The statistical association between these methods was evaluated. Histometry and micro-CT showed that the group which underwent alveolar preservation without primary wound closure had significantly higher new bone density than the group with primary wound closure (P<0.05). However, there was no significant association between the data from histometry and micro-CT analysis. These results suggest that alveolar ridge preservation without primary wound closure enhanced new bone formation more effectively than that with primary wound closure. Further investigation is needed with respect to the comparison of histometry and micro-CT analysis.

  17. Clinical Results of Localized Alveolar Ridge Augmentation with Bone Grafts Harvested from Symphysis in Comparison with Ramus

    Directory of Open Access Journals (Sweden)

    Reza Pourabbas

    2007-06-01

    Full Text Available

    Background and aims. Autogenous onlay bone grafting is a common procedure for alveolar ridge augmentation. It has been suggested that the amount of healed bone after this technique would be significantly less than the initial quantity. The aim of this study was to determine the relationship between the various parameters influencing the outcome of ridge augmentation procedures.

    Materials and methods. Thirty-two patients, 17 males and 15 females (mean age 40 ± 8.66, requiring lateral ridge augmentation in the anterior maxilla were recruited. Bone grafts obtained from either the mandibular ramus or symphysis were grafted on the recipient site and the buccolingual dimensions of the edentulous ridge before and six months after the procedure were measured and the difference between them was considered as ridge augmentation (RA. Parameters including graft thickness (GT, graft area (GA and donor site (DS were also recorded.

    Results. Onlay bone grafts, taken from mandibular and symphysis areas, significantly increased the buccolingual dimension of the alveolar ridge (mean 1.98 ± 1.22 mm, p < 0.001. However, the mean RA by symphysis grafts was significantly greater than ramus grafts (2.49 mm vs. 1.48 mm. There was also a significant correlation between graft thickness, surface area and the amount of bone augmentation.

    Conclusion. Symphysis area provides thicker and larger grafts, which may result in a better clinical outcome in alveolar ridge augmentation.

  18. Alveolar ridge preservation using autogenous tooth graft versus beta-tricalcium phosphate alloplast: A randomized, controlled, prospective, clinical pilot study

    Directory of Open Access Journals (Sweden)

    Chaitanya Pradeep Joshi

    2016-01-01

    Full Text Available Background: A randomized, prospective clinical, radiographical, and histological study was conducted to evaluate healing after alveolar ridge preservation technique using two different graft materials, namely, a novel autogenous graft material i. e., autogenous tooth graft (ATG and beta-tricalcium phosphate (β-TCP alloplast. Materials and Methods: Fifteen patients undergoing extraction of at least three teeth were selected. Atraumatic extractions were performed. Of the three extraction sockets, one was grafted with ATG, other with β-TCP, and the third was left ungrafted. Cone-beam computed tomography scans were taken immediately after grafting and 4 months postoperatively to check the changes in alveolar crest height and width at all the sites. Three patients in whom implant placement was done after complete healing; bone samples were harvested using a 3 mm diameter trephine during osteotomy preparation from both the ridge preserved sites and studied histologically. Results: There was a statistically significant difference when the changes in width and height of alveolar crest were compared within all the three groups (P < 0.05. Among three sites, ATG-grafted sites showed the most superior results with a minimal reduction in alveolar crest height and width. Histological analysis also showed the same trend with more new bone formation at ATG-grafted sites as compared to β-TCP-grafted sites. Conclusion: Postextraction, ridge preservation leads to more predictable maintenance of alveolar ridge height and width. ATG as compared to β-TCP provided superior results. Based on this, we conclude that ATG material can serve as a better alternative to conventional bone graft materials.

  19. Systemic non-malignant osteoporosis and reduction of edentulous alveolar ridges

    Directory of Open Access Journals (Sweden)

    Poštić Srđan D

    2014-01-01

    Full Text Available Introduction. Systemic osteoporosis damages skeletal bones to different degrees. The aim of this study was to determine the intensity and correlation of the osteoporotic changes in the bone density of the skeleton and body mass index (BMI with a reduction in edentulous mandibles, and to assess possibility of reparation of layers of mandibles with increase of mineral content in jaws of patients affected by osteoporosis. Material and Methods. In this study, 99 edentulous patients with decreased bone density comprised the experimental group, and 48 edentulous patients with normal bone densities formed the control. The age of the examined patients was 69.02 ± 7,9, range 53-74 of females and 69.11 ± 7.1, range 59-76 years. Radiographs of the hands and panoramic radiographs were done for all the patients. The values of BMI, metacarpal index, density of lumbar spine (L2-L4, in the phalanx and in segments of the mandibles as well as the edentulous alveolar ridges heights were measured, assessed and calculated. Results. The lowest value of the total skeletal density was established in the osteoporotic patients on the basis of the average T-score of- 2.5 in men, and - 2.6 in women. Minimum values of the edentulous ridges heights (right/left, in mm were measured in both osteoporotic females (21.84/22.39 and males 24.90/24.96 patients. By comparison of the densities of the metacarpal bones, proximal phalanx, segments of the edentulous mandibles and based on the numerical values of the edentulous ridges heights, x2 = 3.81 was found in men and x2 = 4.03 was found in women with normal bone densities; x2 = 5.92 was found in men and x2 = 6.25 was found in women with osteopenia; x2 = 2.63 was found in men and x2 = 3.85 was found in women with osteoporosis, on the level of probability of 0.05. After application of calcium and calcitonin in solutions, moderate increment of density (p < 0.05; p < 0.01 was verified, compensating up to 4% of total loss of mass

  20. A randomized controlled evaluation of alveolar ridge preservation following tooth extraction using deproteinized bovine bone mineral and demineralized freeze-dried bone allograft

    Directory of Open Access Journals (Sweden)

    Rokhsareh Sadeghi

    2016-01-01

    Conclusion: Based on the findings of this study, both materials have positive effect on alveolar ridge preservation after tooth extraction, but there was more new bone formation and less residual graft particles in DFDBA group than in DBBM group.

  1. Photoelastic Stress Analysis Surrounding Implant-Supported Prosthesis and Alveolar Ridge on Mandibular Overdentures

    Directory of Open Access Journals (Sweden)

    Dorival Pedroso da Silva

    2010-01-01

    Full Text Available The purpose of this research was to evaluate the maximum stress around osseointegrated implants and alveolar ridge, in a mandible with left partial resection through a photoelastic mandibular model. The first group consisted of two implants: traditional model (T, implants placed in the position of both canines; fulcrum model (F, implants placed in the position of left canine CL and right lateral incisor LiR. Both models linked through a bar and clips. The second group was consisted of three implants, with implants placed in the position of both canines (CR and CL and the right lateral incisor (LiR, which composed four groups: (1 model with 3 “O” rings, (2 model 2 ERAs, bar with clips, (3 model 2 ERAs bar without clips; (4 model “O” ring bar and ERA. An axial and an oblique load of 6.8 kgf was applied on a overdenture at the 1st Pm, 2nd Pm, and 1st M. Results showed that the area around the left canine (CL was practically free of stress; the left lateral incisor (LiL developed only small tensions, and low stress in all the other cases; the right canine tooth suffered the largest concentrations of stress, mainly with the ERA retention mechanism.

  2. Alveolar Ridge Contouring with Free Connective Tissue Graft at Implant Placement: A 5-Year Consecutive Clinical Study.

    Science.gov (United States)

    Hanser, Thomas; Khoury, Fouad

    2016-01-01

    This study evaluated volume stability after alveolar ridge contouring with free connective tissue grafts at implant placement in single-tooth gaps. A total of 52 single-tooth gaps with labial volume deficiencies in the maxilla (incisors, canines, and premolars) were consecutively treated with implants and concomitant free palatal connective tissue grafts in 46 patients between 2006 and 2009. Implants had to be covered with at least 2 mm peri-implant local bone after insertion. At implant placement, a free connective tissue graft from the palate was fixed inside a labial split-thickness flap to form an existing concave buccal alveolar ridge contour due to tissue volume deficiency into a convex shape. Standardized volumetric measurements of the labial alveolar contour using a template were evaluated before connective tissue grafting and at 2 weeks, 1 year, and 5 years after implantprosthetic incorporation. Tissue volume had increased significantly (P tissue contour of the implant before connective tissue grafting to baseline (2 weeks after implant-prosthetic incorporation). Statistically, 50% of the reference points (P > .05) kept their volume from baseline to 1 year after prosthetic incorporation and from baseline to 5 years after prosthetic incorporation, respectively, whereas reference points located within the area of the implant sulcus showed a significant (P connective tissue grafting appears to be an appropriate long-term means to contour preexisting buccal alveolar volume deficiencies in single implants.

  3. Long-term outcomes of the use of allogeneic, radiation-sterilised bone blocks in reconstruction of the atrophied alveolar ridge in the maxilla and mandible

    OpenAIRE

    Krasny, Marta; Krasny, Kornel; Fiedor, Piotr; Zadurska, Ma?gorzata; Kami?ski, Artur

    2015-01-01

    Increasingly dental surgeons face the challenge of reconstruction of the height and/or thickness of the alveolar ridge as more and more patients wish to have permanent restoration of their dental defects based on intraosseous implants. Evaluation of human allogeneic bone tissue grafts in reconstruction of atrophied alveolar ridge as a pre-implantation procedure. The material comprised 21 patients aged 19?63, treated between 2009 and 2012 by the same surgeon. Restoration of bone tissue defects...

  4. Role of Cone Beam Computed Tomography in Rehabilitation of a Traumatised Deficient Maxillary Alveolar Ridge Using Symphyseal Block Graft Placement

    Directory of Open Access Journals (Sweden)

    Shipra Arora

    2013-01-01

    Full Text Available Deficiencies in the alveolar ridges cause multiple problems in achieving aesthetic and functional outcome of implant therapy and are commonly restored by using onlay graft from intraoral source. Careful assessment of the recipient as well as the donor site using cone beam computed tomography (CBCT is a prerequisite to ideal treatment planning. This paper highlights the critical role of CBCT in planning a successful rehabilitation of traumatised deficient anterior maxillary alveolar ridge using autogenous block graft from mandibular symphysis, followed by implant placement. A 21-year-old male reported with missing right maxillary lateral incisor due to traumatic avulsion 6 months back. A concavity was found on the labial aspect of edentulous area. Serial transplanar images on CBCT revealed gross irregular radiolucency in place of labial cortical plate. Using CBCT, size of the required block was estimated, and mandibular symphyseal area was evaluated for the feasibility of harvesting a graft of suitable dimension. Onlay block graft was harvested from mandibular symphysis and placed at the edentulous site to augment the alveolar ridge. Implants were placed 5 months later and loaded successfully after osseointegration. After 1 year of followup, implant-based prosthesis is working well, without any complications.

  5. A preliminary study of local administration of dexamethasone after tooth extraction: Better preservation of residual alveolar ridge?

    Directory of Open Access Journals (Sweden)

    Poštić Srđan D.

    2014-01-01

    Full Text Available Background/Aim. It is important that the height of the edentulous alveolar ridge after tooth extraction remains at a reasonable acceptable level for as long as possible. The aim of this study was to report preliminary results of the clinical effect of local oral submucous administration of dexamethasone after tooth extractions in order to prepare alveolar supporting tissues for acceptance of removable dentures. Methods. In a total of 15 patients (11 partially and 4 completely edentulous the quantity of 0.25 mL to 0.5 mL of dexamethasone was injected bucally and orally in the region of the tooth socket after complicated extractions. Results. Healing of extraction wounds was uneventful in all the patients, without pain or local inflammation. Conclusion. Dexamethasone can be locally applied to oral tissues to prevent post-extraction inflammation and extensive resorption of the residual alveolar ridge. The obtained results are promising for patients undergoing classic prosthodontic rehabilitation soon after tooth extraction, demonstrating that there are no adverse effects after local oral corticosteroids administration. [Projekat Ministarstva nauke Republike Srbije, br. 175021

  6. Effect of vertical inhomogeneity of the ridge keel filling on its freezing rate

    Directory of Open Access Journals (Sweden)

    O. M. Andreev

    2013-01-01

    Full Text Available Field data on ice ridges in the south-eastern and eastern parts of the Barents Sea collected by specialists of the Arctic and Antarctic Research Institute (AARI in 2003–2007 has been used in attempt to understand the vertical inhomogeneity of the ridge keels filling. New ridges originated from one-year sea ice (with no consolidated layer or or less than 5–10 cm thick have been analyzed. Reduction of original observations under certain additional assumptions has allowed formulating the vertical distribution of the ridge keel fill factor. This approximation has been applied in the one-dimensional thermodynamic ride model developed in AARI to simulate the ice ridges behavior in the Central Arctic and Arctic seas. The modeling of ridge freezing rates for different geographical sites has shown the more intensive freezing of ridge keels in initial stage than expected from previous modeling runs. The new results are consistent with field observations on consolidated layer thickness in ridges. Model calculations for a longer period show no big difference in results obtained with or without the approximation proposed.

  7. Long-term outcomes of the use of allogeneic, radiation-sterilised bone blocks in reconstruction of the atrophied alveolar ridge in the maxilla and mandible.

    Science.gov (United States)

    Krasny, Marta; Krasny, Kornel; Fiedor, Piotr; Zadurska, Małgorzata; Kamiński, Artur

    2015-12-01

    Increasingly dental surgeons face the challenge of reconstruction of the height and/or thickness of the alveolar ridge as more and more patients wish to have permanent restoration of their dental defects based on intraosseous implants. Evaluation of human allogeneic bone tissue grafts in reconstruction of atrophied alveolar ridge as a pre-implantation procedure. The material comprised 21 patients aged 19-63, treated between 2009 and 2012 by the same surgeon. Restoration of bone tissue defects was performed with allogeneic, frozen, radiation-sterilised, corticocancellous blocks. The study included 26 grafting procedures with 7 procedures consisting in reconstruction of the alveolar ridge in the mandible and 19 in the maxilla. In all the cases the atrophied alveolar ridge was successfully reconstructed, which allowed placement of intraosseous implants in compliance with the initial treatment plan. After the treatment was completed the patients reported for follow-up annually. The average time of follow-up amounted to 39 months (28-50 months). None of the implants was lost during the follow-up period. There was one case of gingival recession causing aesthetics deterioration of the prosthetic restoration. In three cases the connector became unscrewed partially, which was corrected at the same visit. Frozen, radiation-sterilised, allogeneic bone blocks constitute good and durable bone-replacement material allowing effective and long-lasting reconstruction of the atrophied alveolar ridge to support durable, implant-based, prosthetic restoration.

  8. Lateral ridge split and immediate implant placement in moderately resorbed alveolar ridges: How much is the added width?

    Directory of Open Access Journals (Sweden)

    Amin Rahpeyma

    2013-01-01

    Full Text Available Background: Lateral ridge split technique is a way to solve the problem of the width in narrow ridges with adequate height. Simultaneous insertion of dental implants will considerably reduce the edentulism time. Materials and Methods: Twenty-five patients who were managed with ridge splitting technique were enrolled. Thirty-eight locations in both jaws with near equal distribution in quadrants received 82 dental fixtures. Beta Tricalcium phosphate (Cerasorb® was used as biomaterial to fill the intercortical space. Submerged implants were used and 3 months later healing caps were placed. Direct bone measurements before and after split were done with a Collis. Patients were clinically re-evaluated at least 6 months after implant loading. All the data were analyzed by Statistical Package for Social Sciences (SPSS software version 11.5 (SPSS Inc, Chicago Illinois, USA. Frequency of edentulous spaces and pre/post operative bone width was analyzed. Paired t-test was used for statistical analysis. Difference was considered significant if P value was less than 0.05. Results: Mean value for presplit width was 3.2 ± 0.34 mm while post-split mean width was 5.57 ± 0.49 mm. Mean gain in crest ridge after ridge splitting was 2 ± 0.3 mm. Statistical analysis showed significant differences in width before and after operation ((P < 0.05. All implants (n = 82 survived and were in full function at follow up (at least 6 months after implant loading. Conclusion: Ridge splitting technique in both jaws showed the predictable outcomes, if appropriate cases selected and special attention paid to details; then the waiting time between surgery and beginning of prosthodontic treatment can be reduced to 3 month.

  9. Regeneración ósea guiada para el aumento vertical del reborde alveolar

    OpenAIRE

    Nappe, C.E.; Baltodano, C.E.

    2013-01-01

    Se considera como aumento óseo vertical, cualquier técnica que apunte a crear una mayor altura del reborde alveolar. A inicios de la década de los 90’s se empezó a utilizar la regeneración ósea guiada (ROG) en mandíbulas atróficas, con el fin de permitir la instalación de implantes óseointegrados. Con el fin de evaluar y exponer parte de la evidencia disponible en la actualidad, con respecto a la ROG para aumento óseo vertical, se realizó la siguiente revisión bibliográfica.

  10. Complications related to bone augmentation procedures of localized defects in the alveolar ridge. A retrospective clinical study

    DEFF Research Database (Denmark)

    Jensen, Anders Torp; Jensen, Simon Storgård; Worsaae, Nils

    2016-01-01

    occurred in 1.7 % after GBR procedures, 25.9 % after staged horizontal ridge augmentation, and 18.2 % after staged vertical ridge augmentation. Infections were diagnosed in 2 % after GBR procedures, 12.5 % after sinus floor elevation (SFE) (transcrestal technique), 5 % after staged SFE, 11 % after staged......, infection, sensory disturbance, additional augmentation procedures needed, and early implant failure. RESULTS: A total of 223 patients (132 women, 91 men; mean age 23.5 years; range 17-65 years) with 331 bone defects had bone augmentation performed into which 350 implants were placed. Soft tissue dehiscence...

  11. Associations between alveolar heights and vertical skeletal pattern in Moroccan adults: a cephalometric study of 127 clinical cases.

    Science.gov (United States)

    Abdelali, Halimi; Benyahia, Hicham; Abouqal, Redouane; Azaroual, Mohammed-Faouzi; Zaoui, Fatima

    2012-03-01

    The aim of our study was to investigate vertical dentoalveolar compensation in untreated patients, in search of an association between vertical facial pattern and alveolar heights. This study involved the participation of 127 untreated Moroccan adults from the patient population of the ODF (Dentofacial Orthopedics) Department at the Center for Dental Treatment and Consultation (CCTD) in Rabat. Full adult dentition was the only criterion for inclusion. Patients with major syndromes and patients with facial clefts were excluded from the study. For the purposes of this analysis, we used profile teleradiography to measure vertical and sagittal skeletal variables as well as vertical dentoalveolar variables in the anterior and posterior maxillary and mandibular regions. We also measured the incisor axes. Analyses and statistical tests were performed with SPSS(®) statistics software (version 9.5 for Windows). Results indicate that: (i) upper posterior alveolar height (UPAH) does not correlate with skeletal variables of facial divergence, but correlates strongly with anterior facial height (AFH) and moderately with posterior facial height (PFH); (ii) lower anterior alveolar height (LAAH) correlates negatively with facial height index (FHI), positively with the FMA and AFH, but does not correlate with PFH; (iii) lower posterior alveolar height (LPAH) does not correlate with skeletal variables of facial divergence; (iv) upper anterior alveolar height (UAAH) changes inversely with FHI, correlates positively with the FMA and does not correlate with PFH. Copyright © 2011. Published by Elsevier Masson SAS.

  12. Bone morphogenetic protein-2 loaded poly(D,L-lactide-co-glycolide microspheres enhance osteogenic potential of gelatin/hydroxyapatite/β-tricalcium phosphate cryogel composite for alveolar ridge augmentation

    Directory of Open Access Journals (Sweden)

    Hao-Chieh Chang

    2017-12-01

    Full Text Available Background/Purpose: Sufficient bony support is essential to ensure the success of dental implant osseointegration. However, the reconstruction of vertical ridge deficiencies is still a major challenge for dental implants. This study introduced a novel treatment strategy by infusing poly(D,L-lactide-co-glycolide (PLGA microspheres encapsulating bone morphogenetic protein-2 (BMP-2 within a gelatin/hydroxyapatite/β-tricalcium phosphate (gelatin/HA/β-TCP cryogel composite to facilitate supra-alveolar ridge augmentation. Methods: The gelatin scaffold was crosslinked using cryogel technique, and HA/β-TCP particles were mechanically entrapped to form the gelatin/HA/β-TCP composite. Co-axial electrohydrodynamic atomization technology was used to fabricate PLGA microspheres encapsulating BMP-2. The composites of gelatin/HA/β-TCP alone, with infusion of BMP-2 solution (BMPi or microspheres (BMPm, were fixed on rat mandibles using a titanium mini-implant for 4 weeks, and the therapeutic efficiency was evaluated by micro-computed tomography, bone fluorochrome, and histology. Results: The gelatin/HA/β-TCP composite was homogenously porous, and BMP-2 was sustained release from the microspheres without initial burst release. Ridge augmentation was noted in all specimens treated with the gelatin/HA/β-TCP composite, and greater bone deposition ratio were noted in Groups BMPi and BMPm. Compared with Group BMPi, specimens in Group BMPm showed significantly greater early osteogenesis and evident osseointegration in the supra-alveolar level. Conclusion: BMP-2 loaded PLGA microspheres effectively promoted osteogenic potential of the gelatin/HA/β-TCP composite and facilitated supra-alveolar ridge augmentation in vivo. Keywords: bone morphogenetic protein-2, bone regeneration, dental implant, tissue engineering, tissue scaffolds

  13. Maxillary alveolar ridge reconstruction with monocortical fresh-frozen bone blocks: a clinical, histological and histomorphometric study.

    Science.gov (United States)

    Acocella, Alessandro; Bertolai, Roberto; Ellis, Edward; Nissan, Joseph; Sacco, Roberto

    2012-09-01

    This investigation is a clinical and histological assessment of fresh-frozen bone use in the reconstruction of maxillary alveolar ridges. The study evaluates the effectiveness of this material as a bone filler prior the placement of dental implants. Sixteen patients with atrophic maxillary ridges underwent maxillary reconstruction with fresh-frozen tibial human block grafts prior to implant placement. Sampling procedures were carried out 4, 6 and 9 months later when a bone core was removed from the grafts for histological and histomorphometric analysis. Eighteen blocks were placed, and each patient received either 1 or 2 blocks. During the sampling procedures, all of the grafts were found to be firm in consistency, well-incorporated, and vascularized. A total of 34 implants were placed into the grafts with a minimum of 40-Newton-cm torque in all cases. The follow-up period ranged from 18 to 30 months. No implants were lost. The histological analysis revealed vital bone with mature and compact osseous tissue surrounded by marrow spaces. Bone allografts can be used successfully as graft material for the treatment of maxillary ridge defects. This type of bone graft can be used safely in the areas of implant placement as a suitable alternative to autogenous grafts. Copyright © 2011 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  14. Bone augmentation procedures in localized defects in the alveolar ridge: clinical results with different bone grafts and bone-substitute materials

    DEFF Research Database (Denmark)

    Jensen, Simon Storgård; Terheyden, Hendrik

    2009-01-01

    PURPOSE: The objective of this review was to evaluate the efficacy of different grafting protocols for the augmentation of localized alveolar ridge defects. MATERIALS AND METHODS: A MEDLINE search and an additional hand search of selected journals were performed to identify all levels of clinical...

  15. Hard and Soft Tissue Management of a Localized Alveolar Ridge Atrophy with Autogenous Sources and Biomaterials: A Challenging Clinical Case

    Directory of Open Access Journals (Sweden)

    C. Maiorana

    2016-01-01

    Full Text Available Particularly in the premaxillary area, the stability of hard and soft tissues plays a pivotal role in the success of the rehabilitation from both a functional and aesthetic aspect. The present case report describes the clinical management of a localized alveolar ridge atrophy in the area of the upper right canine associated with a thin gingival biotype with a lack of keratinized tissue. An autogenous bone block harvested from the chin associated with heterologous bone particles was used to replace the missing bone, allowing for a prosthetic driven implant placement. Soft tissues deficiency was corrected by means of a combined epithelialized and subepithelial connective tissue graft. The 3-year clinical and radiological follow-up demonstrated symmetric gingival levels of the upper canines, with physiological peri-implant probing depths and bone loss. Thus, the use of autogenous tissues combined with biomaterials might be considered a reliable technique in case of highly aesthetic demanding cases.

  16. Contribution of Vertical Methane Flux to Shallow Sediment Carbon Pools across Porangahau Ridge, New Zealand

    Directory of Open Access Journals (Sweden)

    Richard B. Coffin

    2014-08-01

    Full Text Available Moderate elevated vertical methane (CH4 flux is associated with sediment accretion and raised fluid expulsion at the Hikurangi subduction margin, located along the northeast coast of New Zealand. This focused CH4 flux contributes to the cycling of inorganic and organic carbon in solid phase sediment and pore water. Along a 7 km offshore transect across the Porangahau Ridge, vertical CH4 flux rates range from 11.4 mmol·m−2·a−1 off the ridge to 82.6 mmol·m−2·a−1 at the ridge base. Stable carbon isotope ratios (δ13C in pore water and sediment were variable across the ridge suggesting close proximity of heterogeneous carbon sources. Methane stable carbon isotope ratios ranging from −107.9‰ to −60.5‰ and a C1:C2 of 3000 indicate a microbial, or biogenic, source. Near ridge, average δ13C for pore water and sediment inorganic carbon were 13C-depleted (−28.7‰ and −7.9‰, respectively relative to all core subsamples (−19.9‰ and −2.4‰, respectively suggesting localized anaerobic CH4 oxidation and precipitation of authigenic carbonates. Through the transect there was low contribution from anaerobic oxidation of CH4 to organic carbon pools; for all cores δ13C values of pore water dissolved organic carbon and sediment organic carbon averaged −24.4‰ and −22.1‰, respectively. Anaerobic oxidation of CH4 contributed to pore water and sediment organic carbon near the ridge as evidenced by carbon isotope values as low as to −42.8‰ and −24.7‰, respectively. Carbon concentration and isotope analyses distinguished contributions from CH4 and phytodetrital carbon sources across the ridge and show a low methane contribution to organic carbon.

  17. Interim prosthesis preventing tongue protrusion following mandibular alveolar ridge and lower lip resection in a surgically compromised patient.

    Science.gov (United States)

    Aggarwal, Himanshi; Kumar, Pradeep; Ranabhatt, Rani; Singh, Saumyendra V

    2016-09-01

    Carcinomas of the mandibular buccogingival region being aggressive rapidly destroy the supporting bone and adjacent soft tissues, making it mandatory for the oncosurgeon to resect substantial amounts of involved hard and soft tissues. Segmental mandibulectomy -followed by immediate bony and soft tissue reconstruction is the most acceptable approach. However, immediate reconstruction may not always be feasible or possible due to high recurrences potential of lesion, inaccessible residual pathology, or systemic -conditions that pose a risk for graft inosculation. In certain cases, where large portion of lower lip also needs to be sacrificed with alveolar resection, protrusion of tongue through the defect beyond the lip confines leads to drooling of saliva, difficulty in speech and worsening of esthetic appearance, social isolation, and compromised quality of life. So, pending reconstruction and definitive rehabilitation, patients would require provisional treatment to control some of the ill effects. This article presents a simple technique for fabrication of a provisional prosthesis for preventing tongue protrusion, salivary drooling following mandibular alveolar ridge and lip resection. © 2016 Special Care Dentistry Association and Wiley Periodicals, Inc.

  18. Lost salt technique for severely resorbed alveolar ridges: An innovative approach

    Directory of Open Access Journals (Sweden)

    Himanshi Aggarwal

    2012-01-01

    Full Text Available The success of a complete denture relies on the principles of retention, stability and support. The prosthodontist skill lies in applying these principles efficiently in critical situations. Severely resorbed maxillary edentulous ridges that are narrow and constricted with increased inter ridge space provide decreased support, retention and stability. The consequent weight of the processed denture only compromises them further. This article describes a case report of an edentulous patient with resorbed ridges where a simplified technique of fabricating a hollow maxillary complete denture using lost salt technique was used for preservation of denture bearing areas. The hollowing of the denture reduces the weight of the denture, thereby enhancing stability and retention, reducing the further resorption of the jaws.

  19. Calvarial grafts for alveolar ridge reconstruction prior to dental implant placement: an update.

    Science.gov (United States)

    Smolka, Wenko

    2014-12-01

    The aims of this review were to analyze publications related to alveolar crest reconstruction using calvarial grafts and to evaluate the survival and success rates of implants placed into the augmented area. An automated search was made in MEDLINE of clinical publications from 2000 to 2013. Only publications with at least five patients and a minimum follow-up of 6 months were included. Graft success ranged between 97 and 100 %. Donor site complications were minimal. The most frequent complications in the recipient site were wound dehiscence. Prosthodontic loading time in most of the studies was 3 months. Implant survival rates ranged between 95 and 100 %. Implant success rates were between 90.3 and 95.05 %. Grafting procedures with calvarial transplants show a high graft success rate and a sufficient implant success rate. Calvarial bone grafts are a reliable procedure for alveolar crest reconstruction.

  20. Horizontal alveolar ridge augmentation using autologous press fit bone cylinders and micro-lag-screw fixation: technical note and initial experience.

    Science.gov (United States)

    Streckbein, Philipp; Kähling, Christopher; Wilbrand, Jan-Falco; Malik, Christoph-Yves; Schaaf, Heidrun; Howaldt, Hans-Peter; Streckbein, Roland

    2014-07-01

    The use of autologous block bone grafts for horizontal alveolar ridge augmentation in dental implantology is a common surgical procedure. Typically, bone grafts are individually moulded. The aim of this paper is to introduce an innovative procedure in lateral bone augmentation, where the recipient side is adjusted to the graft, not vice versa as in common procedures. Our initial clinical experience of twenty-five consecutive cases is presented. Adjusted trephine drills were used to harvest partly cylindrical grafts from the retromolar region of the mandible. After preparing the recipient site with accurately fitting grinding drills, the bone grafts were transplanted. The horizontally compromised alveolar ridges were successfully augmented and treated with dental implants. No major complication occurred during transplantation, the healing period, and subsequent implant therapy in our experimental setting with 25 patients and 38 augmentation procedures. One out of twenty-five patients presented with temporary dysaesthesia of the inferior alveolar nerve. The new method presented is an effective treatment option for horizontal alveolar ridge augmentation prior to single implant installation. Further studies should evaluate the donor site morbidity and long-term outcome on a larger population. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  1. Vertical and horizontal ridge alterations after tooth extraction in the dog: flap vs. flapless surgery.

    Science.gov (United States)

    Blanco, Juan; Mareque, Santiago; Liñares, Antonio; Muñoz, Fernando

    2011-11-01

    To compare ridge alterations after flap and flapless tooth extraction in the vertical and horizontal dimension in the dog model. This study was carried out on five Beagle dogs. Four extractions were performed in the lower jaw of each dog (two per side. Pm3, Pm4). At the time of tooth extraction, flap surgery was performed on one side (control group). On the contra-lateral side, a flapless extraction was performed (test group). Mesial sockets were left untreated on both sides. After 3 months of healing, the dogs were sacrificed and prepared for histological analysis. Ten samples were evaluated on each group. The vertical difference in height between the buccal and lingual crest was 1.48 mm for the flap, and 1.22 mm for the flapless group. The horizontal dimension of the ridge was 4.41 mm (at 1 mm from the crest), 5.72 mm (at 3 mm from the crest) and 6.67 mm (at 5 mm form the crest) in the flap group. In the flapless group, the measurements were 4.5, 5.58 mm and 6.44 at 1, 3 and 5 mm from the crest, respectively. Evaluating ridge alterations in the vertical and horizontal dimension after 3 months of healing following tooth extraction, results for the flap and the flapless group were very similar. © 2011 John Wiley & Sons A/S.

  2. Comparison of Dental Implant Performance Following Vertical Alveolar Bone Augmentation With Alveolar Distraction Osteogenesis or Autogenous Onlay Bone Grafts: A Retrospective Cohort Study.

    Science.gov (United States)

    Zhao, Kai; Wang, Feng; Huang, Wei; Wang, XuDong; Wu, Yiqun

    2017-10-01

    The aim of this retrospective study was to compare the performance of implants placed after alveolar distraction osteogenesis (ADO) or autogenous onlay bone grafting (AOBG) based on implant survival, peri-implant bone resorption, and clinical parameters. From February 2008 to July 2012, 17 patients (6 women and 11 men) with implant placement after ADO (group 1, n = 8) or AOBG (group 2, n = 9) were included in this retrospective study. In all, 37 implants were placed in group 1 and 22 implants were placed in group 2. Implant survival rate, peri-implant bone resorption, probe depth (PD), modified plaque index (mPI), and modified sulcus bleeding index (mSBI) were analyzed to evaluate implant prognosis. Successful reconstruction of vertical alveolar defects and uneventful implant placement were achieved in all patients in the 2 groups. After a mean follow-up of 47.9 ± 13.3 months, implant survival was 97.3% (36 of 37) in group 1 and 95.5% (21 of 22) in group 2. No statistically relevant differences were observed. Peri-implant bone resorption was 1.29 ± 0.59 mm in group 1, which was slightly higher than 1.24 ± 0.87 mm in group 2 at last follow-up. The difference was not statistically relevant. Favorable peri-implant conditions were indicated by PD, mPI, and mSBI in the 2 groups. ADO and AOBG can be used for correction of vertical alveolar defects with a reliable implant prognosis. Comparably high implant survival rates and favorable peri-implant conditions were attained. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Alveolar ridge augmentation: comparison of two socket graft materials in implant cases.

    Science.gov (United States)

    Tolstunov, Len; Chi, Jibin

    2011-01-01

    With the variety of bone grafting materials available and their use around both natural teeth and dental implants, clinicians need to understand not only basic bone biology but also characteristics of different bone grafting materials to make a proper choice when selecting a material for alveolar bone augmentation and implant treatment. The grafting materials used in the maxillofacial region include autogenous bone, allografts, xenografts, alloplastic or synthetic products, and composite grafts (combination of different materials). This case report describes two frequenly used bone graft materials for socket preservation immediately after extraction: Puros® (Zimmer Dental Inc, www.zimmerdental.com) (allogeneic) and Bio-Oss®(Osteohealth Co, www.osteohealth.comwww.osteohealth.com) (xenogeneic). In the case presented, the authors perform biologic, clinical, radiologic, and histologic analysis of the two grafting materials by placing them side-by-side in the same patient during implant reconstruction. Implant-related phases of bone augmentation are proposed, and an overview of bone grafting materials, specifically Bio-Oss and Puros, is presented.

  4. Co-development of pyogenic granuloma and capillary hemangioma on the alveolar ridge associated with a dental implant: a case report

    OpenAIRE

    Kang, Young-Hoon; Byun, June-Ho; Choi, Mun-Jeong; Lee, Jong-Sil; Jang, Jung-Hui; Kim, Young-Il; Park, Bong-Wook

    2014-01-01

    Introduction The development of various benign oral mucosal lesions associated with dental implants, such as pyogenic granuloma or peripheral giant cell granuloma, has been rarely reported. However, the occurrence of vascular diseases, such as hemangioma, related to dental implants has not been explored in the literature. In this study, we report a case of co-development of pyogenic granuloma and capillary hemangioma on the alveolar ridge associated with a dental implant in a patient undergoi...

  5. The Feasibility of Flapless Approach to Sinus Augmentation Using an Implant Device Designed According to Residual Alveolar Ridge Height.

    Science.gov (United States)

    Better, Hadar; Chaushu, Liat; Nissan, Joseph; Xavier, Samuel; Tallarico, Marco; Chaushu, Gavriel

    2017-12-18

    Hydraulic sinus lift and augmentation may be successfully performed using a dedicated implant device designed according to residual bone height (RBH). The aim of this study was to evaluate whether a flapless surgical approach might negatively influence the outcome. A total of 40 consecutive patients (16 men and 24 women) were included in the study, 20 in each group (minimal flap/control versus flapless/study). Inclusion criteria were ≥ 3 mm RBH, ≥ 6 mm width of the residual alveolar ridge according to preoperative cone beam computerized tomography, and ≥ 8 mm buccopalatal keratinized gingiva for the flapless group. Primary outcome parameters included intraoperative membrane perforation. Secondary outcome parameters included postoperative infection, soft tissue healing, bone gain, and short-term dental implant survival. Mean RBH was 4.6 mm. No intraoperative membrane perforations and no postoperative infections were observed. Mean bone gain height was similar for both groups, at 11 mm. Soft tissue healing was observed within 2 months. In all cases, second-stage surgery allowed generation of at least 2 mm of keratinized gingiva buccally. All implants were osseointegrated at second-stage surgery. The use of a flapless approach to maxillary sinus augmentation using an implant device based on RBH yields predictable results.

  6. Alveolar Ridge Reconstruction with Titanium Meshes and Simultaneous Implant Placement: A Retrospective, Multicenter Clinical Study

    Science.gov (United States)

    Paraud Freixas, Andres; Han, Chang-Hun; Bechara, Sohueil; Tawil, Isaac

    2016-01-01

    Objective. To evaluate horizontal bone gain and implant survival and complication rates in patients treated with titanium meshes placed simultaneously with dental implants and fixed over them. Methods. Twenty-five patients treated with 40 implants and simultaneous guided bone regeneration with titanium meshes (i–Gen®, MegaGen, Gyeongbuk, Republic of Korea) were selected for inclusion in the present retrospective multicenter study. Primary outcomes were horizontal bone gain and implant survival; secondary outcomes were biological and prosthetic complications. Results. After the removal of titanium meshes, the CBCT evaluation revealed a mean horizontal bone gain of 3.67 mm (±0.89). The most frequent complications were mild postoperative edema (12/25 patients: 48%) and discomfort after surgery (10/25 patients: 40%); these complications were resolved within one week. Titanium mesh exposure occurred in 6 patients (6/25 : 24%): one of these suffered partial loss of the graft and another experienced complete graft loss and implant failure. An implant survival rate of 97.5% (implant-based) and a peri-implant marginal bone loss of 0.43 mm (±0.15) were recorded after 1 year. Conclusions. The horizontal ridge reconstruction with titanium meshes placed simultaneously with dental implants achieved predictable satisfactory results. Prospective randomized controlled trials on a larger sample of patients are required to validate these positive outcomes. PMID:27999799

  7. Clinical outcome of alveolar ridge augmentation with individualized CAD-CAM-produced titanium mesh.

    Science.gov (United States)

    Sagheb, K; Schiegnitz, E; Moergel, M; Walter, C; Al-Nawas, B; Wagner, W

    2017-12-01

    The augmentation of the jaw has been and continues to be a sophisticated therapy in implantology. Modern CAD-CAM technologies lead to revival of old and established augmentation techniques such as the use of titanium mesh (TM) for bone augmentation. The aim of this retrospective study was to evaluate the clinical outcome of an individualized CAD-CAM-produced TM based on the CT/DVT-DICOM data of the patients for the first time. In 17 patients, 21 different regions were augmented with an individualized CAD-CAM-produced TM (Yxoss CBR®, Filderstadt, Germany). For the augmentation, a mixture of autologous bone and deproteinized bovine bone mineral (DBBM) or autologous bone alone was used. Reentry with explantation of the TM and simultaneous implantation of 44 implants were performed after 6 months. Preoperative and 6-month postoperative cone beam computed tomographies (CBCT) were performed to measure the gained bone height. The success rate for the bone grafting procedure was 100%. Thirty-three percent of cases presented an exposure of the TM during the healing period. However, premature removal of these exposed meshes was not necessary. Exposure rate in augmentations performed with mid-crestal incisions was higher than in augmentations performed with a modified poncho incision (45.5 vs. 20%, p = 0.221). In addition, exposure rates in the maxilla were significantly higher than in the mandible (66.7 vs. 8.3%, p = 0.009). Gender, smoking, periodontal disease, gingiva type, used augmentation material, and used membrane had no significant influence on the exposure rate (p > 0.05). The mean vertical augmentation was 6.5 ± 1.7 mm, and the mean horizontal augmentation was 5.5 ± 1.9 mm. Implant survival rate after a mean follow-up of 12 ± 6 months after reentry was 100%. Within the limits of the retrospective character of this study, this study shows for the first time that individualized CAD-CAM TM provide a sufficient and safe augmentation technique

  8. Intervention for replacing missing teeth: Alveolar ridge preservation techniques for dental implant site development - evidence summary of Cochrane review

    Directory of Open Access Journals (Sweden)

    Srinivasan Jayaraman

    2015-01-01

    Full Text Available The Cochrane reviews have transparent reporting of the methodology to clarify the reader the methods used for writing the review; hence, each review becomes a large volume of scientific literature. This evidence summary of the Cochrane review published in 2015 for the question, what are the clinical effects (preservation of both width and height of bone, esthetic outcomes, complications, and failure of implant for different alveolar ridge preservation techniques (ARP and materials used in patients planning implant placement following extraction after 6 months follow-up. This review provides evidence for efficacy of different ARP techniques, materials, and superiority of one over the other. It also tries to settle the controversy of timing of placement of implant after grafting. Of the 8 included studies from 50, two trials provide moderate evidence for xenografts versus extraction favoring xenografts in preserving the width and height of bone by 1.97 mm (2.48–1.46 and 2.60 mm (3.43–1.76, respectively in pooled estimates of meta-analysis. Using different material, five-trial were found; of which, two trials provide moderate evidence for alloplast versus xenografts favoring alloplast in preserving the width by 0.44 mm (0.90–0.02 and low-grade evidence for height of bone by 0.35 mm (0.86–0.16 in pooled estimates of meta-analysis. There is a paucity of randomized controlled trial to address other primary and secondary outcomes addressed in this review.

  9. Augmentation of residual alveolar bone height with tissue engineering for dental implant placement

    Directory of Open Access Journals (Sweden)

    S M Balaji

    2014-01-01

    Full Text Available The challenge of correcting deficient vertical alveolar height for dental implant placement has been there since dental implants came in to regular clinical placement. The ability of various methods to increase the residual alveolar height has met with varying results. The primary reason is that the techniques were not quite successful in maintaining the required residual alveolar height. Use of Bone Morphogentic Protein, especially rhBMP-2 has been met with high degree of success in deficient vertical alveolar height in a mandibular ridge. The demonstration of this using a case has been presented here.

  10. Assessment of marginal bone loss using full thickness versus partial thickness flaps for alveolar ridge splitting and immediate implant placement in the anterior maxilla.

    Science.gov (United States)

    Mounir, M; Beheiri, G; El-Beialy, W

    2014-11-01

    The aim of this study was to evaluate the effectiveness of maintaining the periosteal attachment of the facial and palatal cortical plates on crestal bone loss that occurs at the margin of dental implants placed immediately in split anterior maxillary alveolar ridges. This was a prospective randomized comparative clinical trial. The study population included 22 patients with edentulous anterior maxillary alveolar ridges who presented for treatment during the period March 2012 to September 2013. The selected patients were divided randomly into two equal groups. All patients underwent a maxillary ridge splitting technique; a total of 43 implants were placed immediately. A full thickness mucoperiosteal flap was performed in the control group patients, while a split thickness mucosal flap was done in the study group patients. Assessments included measurements of the linear changes in the marginal bone surrounding the implants immediately postoperative and after 6 months. Measurements were taken from cross-sectional and longitudinal cone beam computed tomography images using special software. The partial thickness flap used in the study group decreased the percentage of bone loss by 9.5% for the labial bone plate, 7.9% for the palatal bone plate, and 3.5% for the mesiodistal bone plate. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  11. The use of different methods of augmentation horizontally and vertically on the atrophy of the alveolar bone of the upper and alveolar part of the mandible

    Directory of Open Access Journals (Sweden)

    Анатолий Георгиевич Гулюк

    2015-03-01

    Full Text Available Introduction. The main problem, which is increasingly faced professionals in planning restoration of the integrity of the dentition with the help of dental implants is not enough bone in the area of the supposed implantation. Given the availability of a variety of techniques osteoplasty alveolar defects and a variety of osteoplastic materials, unambiguous solution to the problem does not exist. Planning method and the osteoplasty graft depends on the exact determination of the degree of bone atrophy, nature and extent of the defect.This article on clinical examples demonstrates methods of volume restoration bones of the upper and lower jaws using grafts of different origin.Materials and Methods. In our study we use bone block, taken from the chin of the mandible and the greater wing of the ilium. Also we use bone substitutes, the membranes, the clips (the cortical screw, powder Bio Oss®. For the isolation of the area augmentation applies collagen membrane Bio Gide® (Geistlich Pharma AG, Wolhusen, Switzerland. All surgeries were performed a standard set of surgical instruments and apparatus piezo surgery.Findings and discussion. Through the use of block the autogenous graft and auxiliary materials was successful augmentation of the alveolar bone of the upper and lower jaws with a strong vertical and horizontal atrophy. It was possible to achieve the goals set in the planning phase of treatment. The increase in the cost of therapy is justified for preserving intact adjacent teeth, optimal recovery of the dentition and high functionality and aesthetics prosthetic. It is achieved one of the main goals of dental rehabilitation - improving the quality of life of patients

  12. Evaluation of “Autogenous Bioengineered Injectable PRF – Tooth graft” combination (ABIT in reconstruction of maxillary alveolar ridge defects: CBCT volumetric analysis

    Directory of Open Access Journals (Sweden)

    Lydia Nabil Melek

    2017-01-01

    Full Text Available Background: Extracted human teeth were suggested as a source for autogenous bone grafts, especially that they have similar chemical composition to bone. In order to accelerate healing of bone graft over the bony defect, numerous techniques utilizing platelet and fibrinogen concentrations have been introduced in the literature. Objectives: To evaluate clinically and radiographically the use of autogenous tooth bone graft material in combination with injectable platelet-rich fibrin for reconstruction of resorbed maxillary alveolar ridge. Patients and methods: This study was conducted in ten patients indicated for extraction of maxillary anterior or premolar teeth and having maxillary ridge deficiency. Implants were placed after a period of 3 months of bone grafting. The patients were selected from those attending the Oral and Maxillofacial Surgery Department, Faculty of Dentistry, Alexandria University. Results: Clinically, all the patients showed uneventful healing. Radiographically, the results show 30% increase in mean bone density in the period of six months when compared to pre-operative readings. The grafted site showed an increase in the mean volume by 23.47% three months post-operative when compared to the base line measurements preoperatively. Radiographic evaluation of the alveolar ridge after 3 months of grafting showed a significant mean increase in the ridge width and height at the grafted site. Conclusion: Autogenous fresh demineralized tooth graft that is prepared at the chairside after extractions could be considered as the gold standard for socket preservation, bone augmentation in sinuses or filling bone defects, in patients having non restorable teeth indicated for extraction. The adjuvant use of injectable PRF with its high growth factor content may contribute to more favorable and predictable bone formation at the grafted site.

  13. MICROECOLOGY OF THE MUCOUS MEMBRANE OF THE ALVEOLAR RIDGES IN THE PERIOD OF ADAPTATION TO COMPLETE DENTURES

    Directory of Open Access Journals (Sweden)

    Yanishen I. V.,

    2016-06-01

    quantitative composition of the biocenosis. It is established that the microflora of the alveolar ridge in patients with edentulous consisted of associations of yeasts from 2-5 representatives of the microbial world. It is established that in patients of the experimental group on the 7th day of withdrawal 3-component microbial associations has decreased in 1.3 times, whereas the 4-component associations were recorded in 1.4 times more often compared with the initial period of observation. For patients with adhesive frequency of detection of 2-component microbial associations 30-the day of the research was 1.3 times higher than prior to the setting of the prosthesis. Identify 5 component associations for 30-the day, has decreased in 2 times. In patients without adhesive (control group 4-component microbial associations in the mouth after a week of adaptation to the prosthesis were detected in 1.6 times, and 30 days – in 2 times more often than to prosthetics. The weight 5 component associations through the week remained at the initial level, while after 30 days has increased in 1,5 times. The structure microbiocenosis the mucous of the oral cavity patients with edentulism are represented 13 genera of bacteria and morilioid fungi of the genus Candida, allocated in secondary amounts by lg (2,5±0,19 to lg (5,4±0,17 CFU/g. When adhesive between denture base and mucosa of the alveolar ridge frequency of withdrawal and the density of microbial colonization in the adaptation period were not statistically different. But the density of the microbial population among the control group increased 1.5 times for Enterococcus spp, 1.4 for the Klebsiella spp and 1.6 times for yeast fungi Candida spp. Found a significant decrease in microbial density of the representatives of the resident microflora in 1.4 times for Neisseria spp, 1.6-fold for Lactobacillus spp (p<0.05. Conclusion. The results of these studies indicate significant changes of qualitative and quantitative structure of

  14. Regenerative potential of leucocyte- and platelet-rich fibrin. Part B: sinus floor elevation, alveolar ridge preservation and implant therapy. A systematic review.

    Science.gov (United States)

    Castro, Ana B; Meschi, Nastaran; Temmerman, Andy; Pinto, Nelson; Lambrechts, Paul; Teughels, Wim; Quirynen, Marc

    2017-02-01

    To analyse the effect of leucocyte- and platelet-rich fibrin (L-PRF) on bone regeneration procedures and osseointegration. An electronic and hand search was conducted in three databases (MEDLINE, EMBASE and Cochrane). Only randomized clinical trials, written in English where L-PRF was applied in bone regeneration and implant procedures, were selected. No follow-up restrictions were applied. A total of 14 articles were included and processed. Three subgroups were created depending on the application: sinus floor elevation (SFE), alveolar ridge preservation and implant therapy. In SFE, for a lateral window as well as for the trans-alveolar technique, histologically faster bone healing was reported when L-PRF was added to most common xenografts. L-PRF alone improved the preservation of the alveolar width, resulting in less buccal bone resorption compared to natural healing. In implant therapy, better implant stability over time and less marginal bone loss were observed when L-PRF was applied. Meta-analyses could not be performed due to the heterogeneity of the data. Despite the lack of strong evidence found in this systematic review, L-PRF might have a positive effect on bone regeneration and osseointegration. © 2016 The Authors. Journal of Clinical Periodontology Published by John Wiley & Sons Ltd.

  15. Carcinoma de células escamosas em rebordo alveolar inferior: diagnóstico e tratamento odontológico de suporte Squamous cell carcinoma in lower alveolar ridge: diagnosis and odontologic support treatment

    Directory of Open Access Journals (Sweden)

    Filipe Ivan Daniel

    2006-08-01

    Full Text Available O carcinoma epidermóide é a neoplasia maligna mais comum de cavidade oral e estruturas adjacentes. Apresenta maior incidência no gênero masculino, após a quarta década de vida, e tem como principais fatores etiológicos os usos crônicos de tabaco e álcool. Neste trabalho é relatado um caso de carcinoma de células escamosas do rebordo alveolar inferior, que não é uma região preferencial para esse tipo de patologia. Também é discutida a importância do cirurgião-dentista na equipe de profissionais que assiste esses pacientes, tanto no diagnóstico precoce quanto no manejo das alterações estomatológicas advindas da terapia antineoplásica.Squamous cell carcinoma is the most common malignant neoplasm in oral cavity and adjacent structures. Its prevalence is higher in males, after the fourth decade, and the main etiologic associated factors are smoking and alcohol. This study reports a case of squamous cell carcinoma arising from the lower alveolar ridge, a non-preferential site for this pathology. It also discusses the importance of the dentist in the team of professionals assisting these patients, in early diagnosis and treatment of the stomatological alterations due to antineoplastic therapy.

  16. Comparative alveolar ridge preservation using allogenous tooth graft versus free-dried bone allograft: A randomized, controlled, prospective, clinical pilot study

    Directory of Open Access Journals (Sweden)

    Chaitanya Pradeep Joshi

    2017-01-01

    Full Text Available Background: For the first time in India, allografts from human extracted teeth were prepared. A randomized, prospective, clinicoradiographical, histological study was conducted to evaluate their efficacy in comparison with freeze-dried bone allograft (FDBA in alveolar ridge preservation. Materials and Methods: Graft preparation: with written consent, teeth were collected from three donors (full mouth extraction cases. Once donors' serums were tested negative for HIV, HBV, HCV, and Venereal disease research laboratory (VDRL, mineralized whole tooth allograft (WTA and dentin allograft (DA were prepared using the standard protocol of Tissue Bank at Tata Memorial Hospital, Mumbai, India. Study Design: In this randomized controlled trial, 15 patients undergoing extraction of at least four teeth were selected. In each patient after atraumatic extractions, one socket was grafted with WTA, second with DA, third with FDBA, and fourth was left ungrafted (control site. All the sites were covered with chorion membrane. To estimate three-dimensional alveolar crest changes, cone beam computed tomography scans were taken immediately after grafting and 4 months postoperatively. Bone biopsies using 3 mm trephine bur were obtained from four patients at the time of implant placement and evaluated histologically. Results: Clinically uneventful healing was observed at all sites. Compared to other sites, WTA and DA consistently showed superior results demonstrating least reduction in alveolar crest height and width which was statistically significant (P < 0.05. Between WTA and DA sites, there was no statistically significant difference. Histological analysis also confirmed more new bone formation at WTA and DA sites. Conclusions: Rather than disposing extracted human teeth as a biomedical waste (common practice, they can be collected from suitable systemically healthy donors. With the help of tissue bank, they can be processed into an allograft, serving as an

  17. Minimally Invasive Alveolar Ridge Preservation Utilizing an In Situ Hardening β-Tricalcium Phosphate Bone Substitute: A Multicenter Case Series

    Directory of Open Access Journals (Sweden)

    Minas D. Leventis

    2016-01-01

    Full Text Available Ridge preservation measures, which include the filling of extraction sockets with bone substitutes, have been shown to reduce ridge resorption, while methods that do not require primary soft tissue closure minimize patient morbidity and decrease surgical time and cost. In a case series of 10 patients requiring single extraction, in situ hardening beta-tricalcium phosphate (β-TCP granules coated with poly(lactic-co-glycolic acid (PLGA were utilized as a grafting material that does not necessitate primary wound closure. After 4 months, clinical observations revealed excellent soft tissue healing without loss of attached gingiva in all cases. At reentry for implant placement, bone core biopsies were obtained and primary implant stability was measured by final seating torque and resonance frequency analysis. Histological and histomorphometrical analysis revealed pronounced bone regeneration (24.4 ± 7.9% new bone in parallel to the resorption of the grafting material (12.9 ± 7.7% graft material while high levels of primary implant stability were recorded. Within the limits of this case series, the results suggest that β-TCP coated with polylactide can support new bone formation at postextraction sockets, while the properties of the material improve the handling and produce a stable and porous bone substitute scaffold in situ, facilitating the application of noninvasive surgical techniques.

  18. Should the position of the patellar component replicate the vertical median ridge of the native patella?

    Science.gov (United States)

    Lee, Rae Hyeong; Jeong, Hae Won; Lee, Jin Kyu; Choi, Choong Hyeok

    2017-01-01

    In total knee arthroplasty (TKA), the position of the patellar component can affect patellar tracking. However, the patellar component cannot always replicate the original high point of the patella because of anatomical variance. This study investigated whether altering the highest point of the patella can affect outcomes of primary TKA, especially in patients having a patella with a far-medialized median ridge. A retrospective review was performed for 177 knees (143 patients) treated with primary TKA between July 2011 and March 2014. Group 1 (34 knees) had the patellar component displaced over three millimeters from the median ridge, while Group 2 (143 knees) had the patellar component placed on the original median ridge position. The one-year follow-up outcomes were reviewed, including: patellar tilt angle, Knee Society Score, Feller Patellar Score, and modified Kujala Anterior Knee Pain Score. Mean (±standard deviation) displacement of the patellar component in Group 1 was 3.97±0.97mm lateral to the original position of the median ridge, with a significant decrease in lateral patellar tilt angle (Ppatella in primary TKA. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Immunohistochemial study on the expression of von Willebrand factor (vWF) after onlay autogenous iliac grafts for lateral alveolar ridge augmentation

    Science.gov (United States)

    2013-01-01

    Introduction The main problems of autogenous bone transplants are their unpredictable atrophy and their loss of structure. One key factor lies in the poor revascularization of simple onlay grafts. The the aim of this study was to evaluate the revascularization processes in autogenous bone grafts from the iliac crest to the alveolar ridge. Methods In a sheep model, autogenous bone grafts were harvested from the iliac crest. A combination of a resorbable collagen membrane (CM) and deproteinized bovine bone material (DBBM) was used to modify the bone graft (experiment 2). This was compared with a simple onlay bone graft (control group, experiment 1). The amount of vessels in bone and connective tissue (CT), and the amount of CT were analyzed. The expression of von Willebrand factor (vWF) was compared between the two experimental groups using immunohistochemical analysis. Results The ratio of the amount of vessels in bone and CT changed over time, and more vessels could be detected in bone at 12–16 weeks of graft healing. The number of vessels were significantly higher in experiment 2 than in experiment 1. More CT was found in experiment 1, whereas the amount of CT in both experiments decreased over time. Conclusion This study shows a more intensive and extensive revascularization in experiment 2, as significantly more vessels were detected. The decreased amount of CT in experiment 2 clarifies its clinical superiority. PMID:24330606

  20. The potential of mangosteen (Garcinia mangostana) peel extract, combined with demineralized freeze-dried bovine bone xenograft, to reduce ridge resorption and alveolar bone regeneration in preserving the tooth extraction socket.

    Science.gov (United States)

    Kresnoadi, Utari; Ariani, Maretaningtias Dwi; Djulaeha, Eha; Hendrijantini, Nike

    2017-01-01

    Following the extraction of a tooth, bone resorption can cause significant problems for a subsequent denture implant and restorative dentistry. Thus, the tooth extraction socket needs to be maintained to reduce the chance of any alveolar ridge bone resorption. The objective of this study is to determine whether the administration of mangosteen peel extracts (MPEs), combined with demineralized freeze-dried bovine bone xenograft (DFBBX) materials for tooth extraction socket preservation, could potentially reduce inflammation by decreased the expression of nuclear factor κβ (NfKb) and receptor activator of nuclear factor-κβ ligand (RANKL), to inhibit alveolar bone resorption, and increased of bone morphogenetic protein-2 (BMP2) expressions to accelerate alveolar bone regeneration. This study consists of several stages. First, a dosage of MPE combined with graft materials was applied to a preserved tooth extraction socket of a Cavia cobaya . Second, the C. cobaya was examined using immune histochemical expression of NfKb, RANKL, BMP2, as well as histology of osteoblasts and osteoclasts. The research was statistically analyzed, using an analysis of variance test and Tukey honest significant difference test. The results of this research were that it was determined that MPEs combined with graft materials on a preserved tooth extraction socket can reduce NfKb, RANK, and osteoclasts also increase of BMP2 and osteoblast. The induction of MPEs and DFBBX is effective in reducing inflammation, lowering osteoclasts, decreasing alveolar bone resorption, and also increasing BMP2 expression and alveolar bone regeneration.

  1. Expanded vs. dense polytetrafluoroethylene membranes in vertical ridge augmentation around dental implants: a prospective randomized controlled clinical trial.

    Science.gov (United States)

    Ronda, Marco; Rebaudi, Alberto; Torelli, Lucio; Stacchi, Claudio

    2014-07-01

    This prospective randomized controlled trial was designed to test the performance of titanium-reinforced dense polytetrafluoroethylene (d-PTFE) membrane vs. titanium-reinforced expanded polytetrafluoroethylene (e-PTFE) membrane in achieving vertical bone regeneration, both associated with a composite grafting material. The study enrolled 23 patients requiring bone augmentation with guided bone regeneration (GBR) procedures for placing implants in atrophic posterior mandibles (available bone height membrane (control) or a d-PTFE membrane (test). Membrane removal was performed after 6 months, and changes in bone height were recorded. Seventy-eight implants were inserted in 26 mandibular sites contextually to vertical ridge augmentation procedures. The healing period was uneventful in all sites, and the vertical defects were satisfactorily filled with a newly formed hard tissue. Mean defect fill after 6 months was 5.49 mm (SD ± 1.58) at test sites and 4.91 mm (SD ± 1.78) at control sites. The normalized data (percentage changes against baseline) did not show any statistically significant difference between test and control groups (P = NS). Based on the data from this study, both d-PTFE and e-PTFE membranes showed identical clinical results in the treatment of vertical bone defects around implants, using the GBR technique. The membrane removal procedure was easier to perform in the d-PTFE group than in the e-PTFE group. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

  2. Ridge Splitting Technique for Horizontal Augmentation and Immediate Implant Placement

    Directory of Open Access Journals (Sweden)

    Papathanasiou Ioannis

    2014-03-01

    Full Text Available Insufficient width of the alveolar ridge often prevents ideal implant placement. Guided bone regeneration, bone grafting, alveolar ridge splitting and combinations of these techniques are used for the lateral augmentation of the alveolar ridge. Ridge splitting is a minimally invasive technique indicated for alveolar ridges with adequate height, which enables immediate implant placement and eliminates morbidity and overall treatment time. The classical approach of the technique involves splitting the alveolar ridge into 2 parts with use of ostetomes and chisels. Modifications of this technique include the use of rotating instrument, screw spreaders, horizontal spreaders and ultrasonic device.

  3. Hard tissue augmentation for alveolar defects before implant placement

    Directory of Open Access Journals (Sweden)

    Mutia Rochmawati

    2017-08-01

    Full Text Available Background. Often when planning implant therapy, there is a need to augment or  replace  bone  that  has  been  lost. The alveolar defects may occur as a result of tooth loss due to extraction, advanced periodontal diseases or trauma, long term use of removable appliances, dehiscence and fenestration defects, developmental defects/clefts, congenitally missing teeth and odontogenic cysts and tumors. Insufficient bone volume can be brought about by hard tissue augmentation. This techniques have led to increased predictability in reconstruction of alveolar ridge defects and functional implant placement. Purpose. To describe the methods of hard tissue augmentation which can be done with block grafts (autografts and allografts, particulate grafts (cortical and cancellous, xenografts, or synthetic materials. Review. The reconstruction of a normal alveolar housing, in height and width, is imperative to achieve a harmonious balance between biology, function, and aesthetics. Depending on the size and morphology of the defect, horizontal or vertical, various augmentation procedures can be used. Soft tissue management is a critical aspect of hard tissue augmentation procedures. Incisions, reflection, and manipulation should be designed to optimize blood supply and wound closure. The design and management of mucoperiosteal flaps must consider the increased dimensions of the ridge after augmentation as well as esthetics and approximation of the wound margins. The surgical procedure needs to be executed with utmost care to preserve the maximum vascularity to the flap and minimize tissue injury. Conclusion. Alveolar ridge defects can be classified by using Seibert’s classification or HVC System. The treatment of alveolar ridge defect before implant placement can be done with hard tissue augmentation.

  4. Vertical ridge augmentation using guided bone regeneration (GBR) in three clinical scenarios prior to implant placement: a retrospective study of 35 patients 12 to 72 months after loading.

    Science.gov (United States)

    Urban, Istvan A; Jovanovic, Sascha A; Lozada, Jaime L

    2009-01-01

    The aims of the current study were to: (1) evaluate the results of vertical guided bone regeneration (GBR) with particulate autogenous bone grafts, (2) determine clinically and radiographically the success and survival rates of 82 implants placed in such surgical sites after prosthetic loading for 12 to 72 months, and (3) compare defects that were treated simultaneously with sinus augmentation and vertical GBR to other areas of the jaw treated with vertical GBR only. Eighty-two implants were inserted in 35 patients with 36 three-dimensional vertical bone defects. The patients were divided into three groups: single missing teeth (group A), multiple missing teeth (group B), and vertical defects in the posterior maxilla only (group C). All group C subjects were treated simultaneously with sinus and vertical augmentations. All patients were treated with vertical ridge augmentation utilizing titanium-reinforced polytetrafluoroethylene (e-PTFE) membranes and particulated autografts. After removal of the e-PTFE membrane, all sites received a collagen membrane. At membrane removal, mean vertical augmentation was 5.5 mm (+/-2.29 mm). Mean combined crestal remodeling was 1.01 mm (+/-0.57 mm) at 12 months, which remained stable through the 6-year follow-up period. There were no statistically significant differences between the three groups in mean marginal bone remodeling. One defect had a bone graft complication (2.78%, 95% CI: 0.00%, 8.15%). The overall implant survival rate was 100% with a cumulative success rate of 94.7%. (1) Vertical augmentation with e-PTFE membranes and particulated autografts is a safe and predictable treatment; (2) success and survival rates of implants placed in vertically augmented bone with the GBR technique appear similar to implants placed in native bone under loading conditions; (3) success and failure rates of implants placed into bone regenerated simultaneously with sinus and vertical augmentation techniques compare favorably to those

  5. Reconstructive periodontal therapy with simultaneous ridge augmentation. A clinical and histological case series report.

    Science.gov (United States)

    Windisch, Péter; Szendroi-Kiss, Dóra; Horváth, Attila; Suba, Zsuzsanna; Gera, István; Sculean, Anton

    2008-09-01

    Treatment of intrabony periodontal defects with a combination of a natural bone mineral (NBM) and guided tissue regeneration (GTR) has been shown to promote periodontal regeneration in intrabony defects. In certain clinical situations, the teeth presenting intrabony defects are located at close vicinity of the resorbed alveolar ridge. In these particular cases, it is of clinical interest to simultaneously reconstruct both the intrabony periodontal defect and the resorbed alveolar ridge, thus allowing insertion of endosseous dental implants. The aim of the present study was to present the clinical and histological results obtained with a new surgical technique designed to simultaneously reconstruct the intrabony defect and the adjacently located resorbed alveolar ridge. Eight patients with chronic advanced periodontitis displaying intrabony defects located in the close vicinity of resorbed alveolar ridges were consecutively enrolled in the study. After local anesthesia, mucoperiosteal flaps were raised, the granulation tissue removed, and the roots meticulously scaled and planed. A subepithelial connective tissue graft was harvested from the palate and sutured to the oral flap. The intrabony defect and the adjacent alveolar ridge were filled with a NBM and subsequently covered with a bioresorbable collagen membrane (GTR). At 11-20 months (mean, 13.9+/-3.9 months) after surgery, implants were placed, core biopsies retrieved, and histologically evaluated. Mean pocket depth reduction measured 3.8+/-1.7 mm and mean clinical attachment level gain 4.3+/-2.2 mm, respectively. Reentry revealed in all cases a complete fill of the intrabony component and a mean additional vertical hard tissue gain of 1.8+/-1.8 mm. The histologic evaluation indicated that most NBM particles were surrounded by bone. Mean new bone and mean graft area measured 17.8+/-2.8% and 32.1+/-8.3%, respectively. Within their limits, the present findings indicate that the described surgical approach may be

  6. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla.

    Science.gov (United States)

    Berberi, Antoine N; Sabbagh, Joseph M; Aboushelib, Moustafa N; Noujeim, Ziad F; Salameh, Ziad A

    2014-01-01

    The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P implant after cementation of the provisional (P immediately loaded implants placed either in extraction sockets or healed ridges were similar. Functional loading technique by using prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites.

  7. The potential of mangosteen (Garcinia mangostana peel extract, combined with demineralized freeze-dried bovine bone xenograft, to reduce ridge resorption and alveolar bone regeneration in preserving the tooth extraction socket

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2017-01-01

    Conclusion: The induction of MPEs and DFBBX is effective in reducing inflammation, lowering osteoclasts, decreasing alveolar bone resorption, and also increasing BMP2 expression and alveolar bone regeneration.

  8. A 5- Year Comparison of Marginal Bone Level Following Immediate Loading of Single-Tooth Implants Placed in Healed Alveolar Ridges and Extraction Sockets in the Maxilla.

    Directory of Open Access Journals (Sweden)

    Antoine Nicolas Berberi

    2014-01-01

    Full Text Available AbstractPurpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol.Materials and Methods: Thirty-six patients in need of a single tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden. Implants were placed in healed ridges (group I or immediately into extraction sockets (group II. Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36 and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implantResults: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study and all remaining implants osseointegrated successfully after 5 years of functional loading. The mean change in marginal bone loss after implant placement was 0.267±0.161 for one year, and 0.265±0.171 for three years and 0.213±0.185 for five years in extraction sockets and was 0.266±0.176 for one year and 0.219±0.175 for three years and 0.194±0.172 for five years in healed ridges group. Significant reduction of marginal bone loss was more pronounced in implants inserted in healed ridges (P

  9. Histomorhological and clinical evaluation of maxillary alveolar ridge reconstruction after craniofacial trauma by applying combination of allogeneic and autogenous bone graft

    Directory of Open Access Journals (Sweden)

    Francesco Saverio De Ponte

    2017-02-01

    Full Text Available A variety of techniques and materials for the rehabilitation and reconstruction of traumatized maxillary ridges prior to dental implants placement have been described in literature. Autogenous bone grafting is considered ideal by many researchers and it still remains the most predictable and documented method. The aim of this report is to underline the effectiveness of using allogeneic bone graft for managing maxillofacial trauma. A case of a 30-year-old male with severely atrophic maxillary ridge as a consequence of complex craniofacial injury is presented here. Augmentation procedure in two stages was performed using allogeneic and autogenous bone grafts in different areas of the osseous defect. Four months after grafting, during the implants placement surgery, samples of both sectors were withdrawn and submitted to histological evaluation. On the examination of the specimens, treated by hematoxylin and eosin staining, the morphology of integrated allogeneic bone grafts was revealed to be similar to the autologous bone. Our clinical experience shows how the allogeneic bone graft presented normal bone tissue architecture and is highly vascularized, and it can be used for reconstruction of severe trauma of the maxilla.

  10. Histomorhological and clinical evaluation of maxillary alveolar ridge reconstruction after craniofacial trauma by applying combination of allogeneic and autogenous bone graft.

    Science.gov (United States)

    De Ponte, Francesco Saverio; Falzea, Roberto; Runci, Michele; Siniscalchi, Enrico Nastro; Lauritano, Floriana; Bramanti, Ennio; Cervino, Gabriele; Cicciu, Marco

    2017-02-01

    A variety of techniques and materials for the rehabilitation and reconstruction of traumatized maxillary ridges prior to dental implants placement have been described in literature. Autogenous bone grafting is considered ideal by many researchers and it still remains the most predictable and documented method. The aim of this report is to underline the effectiveness of using allogeneic bone graft for managing maxillofacial trauma. A case of a 30-year-old male with severely atrophic maxillary ridge as a consequence of complex craniofacial injury is presented here. Augmentation procedure in two stages was performed using allogeneic and autogenous bone grafts in different areas of the osseous defect. Four months after grafting, during the implants placement surgery, samples of both sectors were withdrawn and submitted to histological evaluation. On the examination of the specimens, treated by hematoxylin and eosin staining, the morphology of integrated allogeneic bone grafts was revealed to be similar to the autologous bone. Our clinical experience shows how the allogeneic bone graft presented normal bone tissue architecture and is highly vascularized, and it can be used for reconstruction of severe trauma of the maxilla. Copyright © 2017 Daping Hospital and the Research Institute of Surgery of the Third Military Medical University. Production and hosting by Elsevier B.V. All rights reserved.

  11. Effect of buccal gap distance on alveolar ridge alteration after immediate implant placement: a microcomputed tomographic and morphometric analysis in dogs.

    Science.gov (United States)

    Pluemsakunthai, Warunee; Le, Bach; Kasugai, Shohei

    2015-02-01

    The buccal bone resorption and the deformation of soft tissue contour are major problems of immediate implant treatment. This study aims to examine the changes of alveolar bone and soft tissue after immediate implant placement in different buccal gap distances. Eight implants were placed randomly in the mandibular premolar sockets of 6 hybrid dogs with 1, 2, and 3 mm buccal gap distances. The dogs were killed after 2 or 4 months for morphometric and microcomputed tomography analyses. After 2 months, the 3-mm group had the highest buccal bone volume (BV), buccal bone/soft tissue thickness, and the lowest bone resorption. The wider the buccal gap, the more buccal bone and soft tissue were formed in this experimental setting. After 4 months, the buccal BV had decreased significantly in the 1-mm and the 2-mm groups, whereas the 3-mm group resisted to buccal bone resorption. This difference was more pronounced at the crest. The 3 mm is the optimal gap distance among the groups examined, which drastically influences the healing of bone and soft tissue surrounding the implants.

  12. Evaluación clínica y radiográfica de la técnica de distracción osteogénica en la reconstrucción de rebordes alveolares atróficos en la región anterior del maxilar superior A clinical and radiographic evaluation of the distraction osteogenesis technique for the reconstruction of atrophic alveolar ridges in the anterior region of the upper maxilla

    Directory of Open Access Journals (Sweden)

    M.E. Allais de Maurette

    2005-06-01

    Full Text Available Este estudio tiene como objetivo evaluar clínica y radiográficamente la técnica de distracción osteogénica alveolar en la región anterior del maxilar superior y las posibles complicaciones que pueden aparecer durante el tratamiento. Fueron evaluados 15 pacientes, sometidos a reconstrucción alveolar del maxilar superior en la región anterior con distracción osteogénica, usando un distractor yuxtaóseo. Del total de 15 pacientes encontramos que 13 pacientes (86,6% obtuvieron un éxito total de la técnica, obteniendo una ganancia ósea real media de 7,04 mm; en 1 paciente (6,66% fue parcial (2,62 mm y en 1 paciente (6,66% se evidenció un fracaso en la técnica, al alcanzar solo 0,76 mm debido a problemas en la activación del distractor. En cuanto a las complicaciones surgidas durante el tratamiento fueron divididas en complicaciones menores, toda aquella que no interfirió en el éxito del tratamiento, y que estuvieron presentes en 8 pacientes (53,33%, y complicaciones mayores aquellas que no permitieron la rehabilitación con implantes, y que fue encontrado solo en 1 paciente (6,66%. La técnica de distracción osteogénica alveolar, demostró ser eficaz en la reconstrucción de rebordes alveolares atróficos con un éxito de 93,33%, presentado pequeñas complicaciones que pueden ser solventadas por medio de un seguimiento por parte del profesional.This study evaluates clinically and radiographically the distraction osteogenesis technique for the reconstruction of atrophic alveolar ridges in the anterior maxilla region, and the possible complications that arise during treatment. Fifteen patients were evaluated, clinically and radiographically, that had been treated with alveolar distraction osteogenesis in the anterior region, using a juxta-osseous distractor. In 13 patients (86.6% the technique was completely successful, there being an effective bone gain of 7,04 mm. In 1 patient (6.66% this was partial (2.62 mm and in 1 patient (6

  13. Pulmonary alveolar proteinosis

    Science.gov (United States)

    PAP; Alveolar proteinosis; Pulmonary alveolar phospholipoproteinosis; Alveolar lipoproteinosis phospholipidosis ... PAP is unknown. In others, it occurs with lung infection or an immune problem. It also can ...

  14. [Dental implantation and soft tissue augmentation after ridge preservation in a molar site: a case report].

    Science.gov (United States)

    Zhao, L P; Zhan, Y L; Hu, W J; Wang, H J; Wei, Y P; Zhen, M; Xu, T; Liu, Y S

    2016-12-18

    For ideal implant rehabilitation, an adequate bone volume, optical implant position, and stable and healthy soft tissue are required. The reduction of alveolar bone and changes in its morphology subsequent to tooth extraction will result in insufficient amount of bone and adversely affect the ability to optimally place dental implants in edentulous sites. Preservation of alveolar bone volume through ridge preservation has been demonstrated to reduce the vertical and horizontal contraction of the alveolar bone crest after tooth extraction and reduce the need for additional bone augmentation procedures during implant placement. In this case, a patient presented with a mandible molar of severe periodontal disease, the tooth was removed as atraumatically as possible and the graft material of Bio-Oss was loosely placed in the alveolar socket without condensation and covered with Bio-Gide to reconstruct the defects of the alveolar ridge. Six months later, there were sufficient height and width of the alveolar ridge for the dental implant, avoiding the need of additional bone augmentation and reducing the complexity and unpredictability of the implant surgery. Soft tissue defects, such as gingival and connective tissue, played crucial roles in long-term implant success. Peri-implant plastic surgery facilitated development of healthy peri-implant structure able to withstand occlusal forces and mucogingival stress. Six months after the implant surgery, the keratinized gingiva was absent in the buccal of the implant and the vestibular groove was a little shallow. The free gingival graft technique was used to solve the vestibulum oris groove supersulcus and the absence of keratinized gingiva around the implant. The deepening of vestibular groove and broadening of keratinized gingiva were conducive to the long-term health and stability of the tissue surrounding the implant. Implant installation and prosthetic restoration showed favorable outcome after six months.

  15. 3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications

    Directory of Open Access Journals (Sweden)

    Farah Asa’ad

    2016-01-01

    Full Text Available To ensure a successful dental implant therapy, the presence of adequate vertical and horizontal alveolar bone is fundamental. However, an insufficient amount of alveolar ridge in both dimensions is often encountered in dental practice due to the consequences of oral diseases and tooth loss. Although postextraction socket preservation has been adopted to lessen the need for such invasive approaches, it utilizes bone grafting materials, which have limitations that could negatively affect the quality of bone formation. To overcome the drawbacks of routinely employed grafting materials, bone graft substitutes such as 3D scaffolds have been recently investigated in the dental field. In this review, we highlight different biomaterials suitable for 3D scaffold fabrication, with a focus on “3D-printed” ones as bone graft substitutes that might be convenient for various applications related to implant therapy. We also briefly discuss their possible adoption for periodontal regeneration.

  16. Microvascular soft tissue changes in alveolar distraction osteogenesis

    NARCIS (Netherlands)

    Lindeboom, Jerome A.; Mathura, Keshen R.; Milstein, Dan M. J.; Ince, Can

    2008-01-01

    Objective. The aim of the study was to quantify the effect of distraction osteogenesis on the changes in vascular density in the human oral mucosa. Material and methods. Alveolar distraction was performed in 10 patients with alveolar ridge deficiencies, while in the contralateral nondistracted site

  17. Dimensional Ridge Preservation with a Novel Highly Porous TiO 2 Scaffold: An Experimental Study in Minipigs

    Directory of Open Access Journals (Sweden)

    Hanna Tiainen

    2012-01-01

    Full Text Available Despite being considered noncritical size defects, extraction sockets often require the use of bone grafts or bone graft substitutes in order to facilitate a stable implant site with an aesthetically pleasing mucosal architecture and prosthetic reconstruction. In the present study, the effect of novel TiO2 scaffolds on dimensional ridge preservation was evaluated following their placement into surgically modified extraction sockets in the premolar region of minipig mandibles. After six weeks of healing, the scaffolds were wellintegrated in the alveolar bone, and the convex shape of the alveolar crest was preserved. The scaffolds were found to partially preserve the dimensions of the native buccal and lingual bone walls adjacent to the defect site. A tendency towards more pronounced vertical ridge resorption, particularly in the buccal bone wall of the nongrafted alveoli, indicates that the TiO2 scaffold may be used for suppressing the loss of bone that normally follows tooth extraction.

  18. Long-term effects of vertical bone augmentation: a systematic review

    Directory of Open Access Journals (Sweden)

    Johan Anton Jochum Keestra

    2016-02-01

    Full Text Available ABSTRACT Extraction, periodontitis, or trauma can cause a reduction on the alveolar ridge. This could result in an insufficient alveolar bone width and height. Different techniques of vertical bone augmentation are described in literature. However, nowadays there is not enough evidence against lateral augmentation procedures to verify if these techniques are stable over a long period of time. Objective This review analyses the different techniques that are used to vertically augment the bone and evaluate if these techniques are stable over a long period of time. Material and Methods The MEDLINE-PubMed database was searched from its earliest records until December 22, 2014. The following search term was used: Alveolar Ridge augmentation [MESH]. Several journals were hand searched and some authors were contacted for additional information. The primary outcome measure that was analyzed was marginal bone level change around dental implants in the augmented sites, and the secondary outcomes were survival and success rates of dental implants placed in the augmented sites. Results The search yielded 203 abstracts. Ultimately, 90 articles were selected, describing 51 studies meeting the eligibility criteria. The marginal bone level change for the inlay technique and vertical guided bone regeneration are in agreement with the success criteria. Alveolar distraction showed more marginal bone level change after the first year of loading, and for the inlay technique very few studies were available. Conclusions Based on the available data in the current existing studies with a follow-up period of at least 4 to 5 years, one can summarize that there seems to be a trend that the onlay technique, alveolar distraction, and vertical guided bone regeneration are stable for at least 4 to 5 years.

  19. Sutures - ridged

    Science.gov (United States)

    Ridged sutures ... The borders where these plates intersect are called sutures or suture lines. In an infant only a few minutes ... This makes the bony plates overlap at the sutures and creates a small ridge. This is normal ...

  20. Growth of a tectonic ridge

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, R.W.; Messerich, J.A. [Geological Survey, Denver, CO (United States); Johnson, A.M. [Purdue Univ., West Lafayette, IN (United States). Dept. of Earth and Atmospheric Sciences

    1997-12-31

    The 28 June 1992 Landers, California, earthquake of M 7.6 created an impressive record of surface rupture and ground deformation. Fractures extend over a length of more than 80 km including zones of right-lateral shift, steps in the fault zones, fault intersections and vertical changes. Among the vertical changes was the growth of a tectonic ridge described here. In this paper the authors describe the Emerson fault zone and the Tortoise Hill ridge including the relations between the fault zone and the ridge. They present data on the horizontal deformation at several scales associated with activity within the ridge and belt of shear zones and show the differential vertical uplifts. And, they conclude with a discussion of potential models for the observed deformation.

  1. Primary alveolar hypoventilation

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000078.htm Primary alveolar hypoventilation To use the sharing features on this page, please enable JavaScript. Primary alveolar hypoventilation is a rare disorder in which ...

  2. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  3. Ridge augmentation in implant dentistry

    Directory of Open Access Journals (Sweden)

    Manoj Goyal

    2015-01-01

    Full Text Available Dimensional changes in the alveolar ridge after extraction often compromises on achieving optimal implant stability and placement of implants in the right prosthodontic positions. These situations demand augmentation of the residual ridge to achieve successful implant placement and long-term survival. Although the available literature speaks of an overabundance of techniques and agents for ridge augmentation, there is a relative paucity of quality evidence to guide the selection of suitable techniques and material. Henceforth, this paper is an endeavor to develop and describe an evidence-based decision pathway for the selection of suitable techniques for various clinical situations. Additionally, a descriptive overview of various techniques and materials is presented.

  4. Proteinosis alveolar pulmonar Pulmonary alveolar proteinosis

    OpenAIRE

    Concepción Sánchez Infante; Anixia Serrano Sánchez; Roberto Razón Behar; Cristina Reyes López

    2011-01-01

    La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipo...

  5. Review of secondary alveolar cleft repair.

    Science.gov (United States)

    Cho-Lee, Gui-Youn; García-Díez, Eloy-Miguel; Nunes, Richard-Agostinho; Martí-Pagès, Carles; Sieira-Gil, Ramón; Rivera-Baró, Alejandro

    2013-01-01

    The alveolar cleft is a bony defect that is present in 75% of the patients with cleft lip and palate. Although secondary alveolar cleft repair is commonly accepted for these patients, nowadays, controversy still remains regarding the surgical technique, the timing of the surgery, the donor site, and whether the use of allogenic materials improve the outcomes. The purpose of the present review was to evaluate the protocol, the surgical technique and the outcomes in a large population of patients with alveolar clefts that underwent secondary alveolar cleft repair. A total of 109 procedures in 90 patients with alveolar cleft were identified retrospectively after institutional review board approval was obtained. The patients were treated at a single institution during a period of 10 years (2001-2011). Data were collected regarding demographics, type of cleft, success parameters of the procedure (oronasal fistulae closure, unification of the maxillary segments, eruption and support of anterior teeth, support to the base of the nose, normal ridge form for prosthetic rehabilitation), donor site morbidity, and complications. Pre- and postoperative radiological examination was performed by means of orthopantomogram and computed tomography (CT) scan. The average patient age was 14.2 years (range 4-21.3 years). There were 4 right alveolar-lip clefts, 9 left alveolar-lip clefts, 3 bilateral alveolar-lip clefts, 18 right palate-lip clefts, 40 left palate-lip clefts and 16 bilateral palate-lip clefts. All the success parameters were favorable in 87 patients. Iliac crest bone grafts were employed in all cases. There were three bone graft losses. In three cases, allogenic materials used in a first surgery performed in other centers, underwent infection and lacked consolidation. They were removed and substituted by autogenous iliac crest bone graft. THE USE OF AUTOGENOUS ILIAC CREST FOR SECONDARY ALVEOLAR BONE GRAFTING ACHIEVES ALL THESE SEVERAL OBJECTIVES: (1) to obtain maxillary

  6. Oral health-related quality of life changes after placement of immediately loaded single implants in healed alveolar ridges or extraction sockets: a 5-year prospective follow-up study.

    Science.gov (United States)

    Raes, Stefanie; Raes, Filiep; Cooper, Lyndon; Giner Tarrida, Luis; Vervaeke, Stijn; Cosyn, Jan; De Bruyn, Hugo

    2017-06-01

    The impact of single implants on oral health-related quality of life (OHRQoL) is scarcely investigated, especially when combined with immediate placement and loading in extraction sockets. The aim was to describe prospectively the changes of OHRQoL with single implants placed in the esthetic zone in healed ridges or in extraction sockets after 5 years. Ninety-six patients, enrolled at three clinical centers, received 102 single implants placed in a healed ridge (n = 54 implants/50 patients) or in extraction sockets (n = 48 implants/46 patients). Implants were immediately provisionalized, and permanent crowns were cemented after 12 weeks. Oral health impact profile questionnaires (OHIP-14) were completed before surgery, after 1 (provisional crown), 6 (permanent crown), 12 and 60 months, respectively. The overall OHIP-14 score pertains to seven domains with two items each and was assessed on a Likert scale of 0-4 (0 = never and 4 = very often). The evolution of the total OHIP-14 score and changes within all OHIP domains over time and between groups were assessed with a linear mixed-effect model analysis. After 5 years, overall implant survival was 98%. The total OHIP-14 score for both groups combined decreased from 0.50 at baseline to 0.17 at 6 months (P problems as reflected by a low overall OHIP score. However, OHRQoL improves less in the extraction group, reflecting that replacing a missing tooth is perceived as more beneficial than replacing a present tooth. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Presurgical orthodontic decompensation alters alveolar bone condition around mandibular incisors in adults with skeletal Class III malocclusion.

    Science.gov (United States)

    Sun, Boyang; Tang, Jun; Xiao, Ping; Ding, Ying

    2015-01-01

    This study is to use cone beam computed tomography (CBCT) to acquire accurate radiographic images for alveolar bone in lower incisors and the change after presurgical orthodontic treatment. Seventeen patients with skeletal Class III malocclusion, ten normal occlusion subjects, and fifteen patients treated with orthodontic treatment and orthognathic surgery were included. CBCT images were obtained. The labial and lingual inclinations of mandibular incisors, the thickness of alveolar bone, the vertical alveolar height and root length were measured. Alveolar bone thickness at the apex in patients with skeletal Class III malocclusion was thinner than normal subjects. The vertical alveolar bone heights at labial and lingual sides in patients with skeletal Class III malocclusion were both reduced compared with normal subjects, especially at the labial side. There were statistically significant correlations between lower incisor inclination and alveolar bone morphology. After orthodontics, the incisors root apex was closer to the lingual side of alveolar bone. The alveolar bone thickness at apex was not statistically changed. The vertical alveolar bone heights at the labial and lingual sides were both significantly reduced especially the lingual side after presurgical orthodontic treatment. The root length was not significantly changed. In conclusion, the alveolar bone thickness at apex is thinner and the vertical alveolar height is reduced at the labial side. Forward movement of lower incisors during presurgical orthodontic treatment can render the lower incisors root apex closer to the lingual side and the vertical alveolar height is reduced.

  8. Proteinosis alveolar pulmonar Pulmonary alveolar proteinosis

    Directory of Open Access Journals (Sweden)

    Concepción Sánchez Infante

    2011-12-01

    Full Text Available La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipoxemia, y, con imágenes radiológicas de tipo retículo-nodulillar, en vidrio deslustrado, en el cual se plantea inicialmente el diagnóstico de bronconeumonía. Ante la evolución desfavorable y no respuesta al tratamiento, se realizó un estudio para descartar enfermedades pulmonares crónicas. El paciente fallece y se confirma el diagnóstico por anatomía patológica. Se realiza una revisión del tema.The pulmonary alveolar proteinosis is a chronic respiratory disease characterized by surfactant metabolism alteration determining its abnormal accumulation in the alveolar space. It is a disease very rare and in literature only 500 cases have been reported; it was described for the first time in 1958. This is a case presentation of pulmonary alveolar proteinosis in an infant aged 2 months with energetic protein malnutrition admitted due to respiratory difficulty and hypoxemia and with radiologic images of the reticulonodulillary, in frosting glass, where initially is made the diagnosis of bronchopneumonia. In the face of unfavorable evolution and no response to treatment, a study was conducted to rule out chronic pulmonary diseases. Patient died confirming the diagnosis according to the pathologic anatomy. A review on subject is carried out.

  9. Localized ridge defect augmentation using human pericardium membrane and demineralized bone matrix

    Directory of Open Access Journals (Sweden)

    Arun Kumar Vidyadharan

    2014-01-01

    Conclusion and Clinical Implications: The results suggested that HP Allograft membrane may be a suitable component for augmentation of localized alveolar ridge defects in conjunction with DBM with bone chips.

  10. Proteinosis alveolar pulmonar

    OpenAIRE

    Concepción Sánchez Infante; Anixia Serrano Sánchez; Roberto Razón Behar; Cristina Reyes López

    2011-01-01

    La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipo...

  11. Surgical protocols for ridge preservation after tooth extraction. A systematic review.

    Science.gov (United States)

    Vignoletti, Fabio; Matesanz, Paula; Rodrigo, Daniel; Figuero, Elena; Martin, Conchita; Sanz, Mariano

    2012-02-01

    This systematic review aims to evaluate the scientific evidence on the efficacy in the surgical protocols designed for preserving the alveolar ridge after tooth extraction and to evaluate how these techniques affect the placement of dental implants and the final implant supported restoration. A thorough search in MEDLINE-PubMed, Embase and the Cochrane Central Register of controlled trials (CENTRAL) was conducted up to February 2011. Randomized clinical trials and prospective cohort studies with a follow-up of at least 3 months reporting changes on both the hard and soft tissues (height and/or width) of the alveolar process (mm or %) after tooth extraction were considered for inclusion. The screening of titles and abstracts resulted in 14 publications meeting the eligibility criteria. Data from nine of these 14 studies could be grouped in the meta-analyses. Results from the meta-analyses showed a statistically significant greater ridge reduction in bone height for control groups as compared to test groups (weighted mean differences, WMD = -1.47 mm; 95% CI [-1.982, -0.953]; P protocol used for the socket preservation (flapless/flapped, barrier membrane/no membrane, primary intention healing/no primary healing) and on the measurement method utilized to evaluate morphological changes. Meta-regression analyses demonstrated a statistically significant difference favoring the flapped subgroup in terms of bone width (meta-regression; slope = 2.26; 95% IC [1.01; 3.51]; P = 0.003). The potential benefit of socket preservation therapies was demonstrated resulting in significantly less vertical and horizontal contraction of the alveolar bone crest. The scientific evidence does not provide clear guidelines in regards to the type of biomaterial, or surgical procedure, although a significant positive effect of the flapped surgery was observed. There are no data available to draw conclusions on the consequences of such benefits on the long-term outcomes of implant therapy.

  12. 3D-CT evaluation of secondary alveolar bone grafts in alveolar clefts

    Energy Technology Data Exchange (ETDEWEB)

    Naitoh, Hiroshi; Nishimura, Yoshihiko [Kyoto Univ. (Japan). Graduate School of Medicine; Yamawaki, Yoshiroh [Kyoto Katsura Hospital (Japan); Morimoto, Naoki [Kobe City General Hospital (Japan)

    2002-07-01

    From 1994 to 2000, we treated 116 patients with cleft alveolus by secondary alveolar bone grafts, and 48 of them were evaluated morphologically with 3D-CT. The frequency of successful bony bridging was significantly higher in the group whose grafts were completely enveloped (including the anterior alveolar ridge) with a mucoperiosteal flap. The frequency was also significantly higher in the group who underwent bone grafts at the age of 13 or less, and canine eruptions did not influence the ratio. Some cases showed such an improved growth pattern of grafted bone that the shape of the affected maxilla resembled that of the normal side, after long-term follow-up observations. The growth increment was remarkable in anterior maxillary height. Orthodontic management guides the canine or incisor into the reconstructed area of the previous cleft. We surmise that the new occlusal position puts pressure on the grafted bone and promotes further osteogenesis. These findings show that it is important to produce sufficient bony bridge to guide the canine or incisor, not the volume of grafted bone, in secondary alveolar bone grafts. Long-term follow-up observation, after more than 2-3 years, is also necessary to evaluate secondary alveolar bone grafts. (author)

  13. New ridge parameters for ridge regression

    Directory of Open Access Journals (Sweden)

    A.V. Dorugade

    2014-04-01

    Full Text Available Hoerl and Kennard (1970a introduced the ridge regression estimator as an alternative to the ordinary least squares (OLS estimator in the presence of multicollinearity. In ridge regression, ridge parameter plays an important role in parameter estimation. In this article, a new method for estimating ridge parameters in both situations of ordinary ridge regression (ORR and generalized ridge regression (GRR is proposed. The simulation study evaluates the performance of the proposed estimator based on the mean squared error (MSE criterion and indicates that under certain conditions the proposed estimators perform well compared to OLS and other well-known estimators reviewed in this article.

  14. Effect of single and contiguous teeth extractions on alveolar bone remodeling: a study in dogs.

    Science.gov (United States)

    Al-Askar, Mansour; O'Neill, Rory; Stark, Paul C; Griffin, Terrence; Javed, Fawad; Al-Hezaimi, Khalid

    2013-08-01

    Tooth extraction is associated with dimensional changes in the alveolar ridge. The aim was to examine the effect of single versus contiguous teeth extractions on the alveolar ridge remodeling. Five female beagle dogs were randomly divided into three groups on the basis of location (anterior or posterior) and number of teeth extracted - exctraction socket classification: group 1 (one dog): single-tooth extraction; group 2 (two dogs): extraction of two teeth; and group 3 (two dogs): extraction of three teeth in four anterior sites and four posterior sites in both jaws. The dogs were sacrificed after 4 months. Sagittal sectioning of each extraction site was performed and evaluated using microcomputed tomography. Buccolingual or palatal bone loss was observed 4 months after extraction in all three groups. The mean of the alveolar ridge width loss in group 1 (single-tooth extraction) was significantly less than those in groups 2 and 3 (p < .001) (multiple teeth extraction). Three-teeth extraction (group 3) had significantly more alveolar bone loss than two-teeth extraction (group 2) (p < .001). The three-teeth extraction group in the upper and lower showed more obvious resorption on the palatal/lingual side especially in the lower group posterior locations. Contiguous teeth extraction caused significantly more alveolar ridge bone loss as compared with when a single tooth is extracted. © 2011 Wiley Periodicals, Inc.

  15. Vertical distraction osteogenesis of fibula transplants for mandibular reconstruction--a preliminary study.

    Science.gov (United States)

    Klesper, Bernd; Lazar, Frank; Siessegger, Matthias; Hidding, Johannes; Zöller, Joachim E

    2002-10-01

    When reconstructing the mandible after tumour resection with a fibular graft, the mandible is often vertically deficient, making placement of dental implants impossible. Segmental vertical distraction of the reconstructed mandible was performed in nine patients following tumour surgery between February 1998 and 2001. Their age was 14-65 years (average 46.3); all underwent radiotherapy with a dose of up to 55.6 Gy prior to tumour resection. Mandibular discontinuity was repaired with a microvascular fibular bone graft. All grafts had a vertical bone deficit ranging from 9 to 12 mm when compared with the non-resected part of the mandibles. All patients underwent segmental vertical distraction of the transplants. The distraction devices were applied intraorally. Distraction of 1.0 mm/day was performed using a Martin distractor (TRACK 1.5) followed by 12 weeks retention time. The increase of vertical bone height was stable and enabled placement of dental implants without any complications. Vertical distraction osteogenesis may become a common procedure in the treatment of alveolar ridge deficiency resulting from transplanting fibulae for mandibular reconstruction following tumour surgery.

  16. Biomechanical comparison of a novel engine-driven ridge spreader and conventional ridge splitting techniques.

    Science.gov (United States)

    Jung, Gyu-Un; Kim, Jun Hwan; Lim, Nam Hun; Yoon, Gil Ho; Han, Ji-Young

    2017-06-01

    Ridge splitting techniques are used for horizontal ridge augmentation in implant dentistry. Recently, a novel engine-driven ridge splitting technique was introduced. This study compared the mechanical forces produced by conventional and engine-driven ridge splitting techniques in porcine mandibles. In 33 pigs, mandibular premolar areas were selected for the ridge splitting procedures, designed as a randomized split-mouth study. The conventional group underwent a chisel-and-mallet procedure (control group, n = 20), and percussive impulse (Newton second, Ns) was measured using a sensor attached to the mallet. In the engine-driven ridge spreader group (test group, n = 23), a load cell was used to measure torque values (Newton centimeter, Ncm). Horizontal acceleration generated during procedures (control group, n = 10 and test group, n = 10) was compared between the groups. After ridge splitting, the alveolar crest width was significantly increased both in the control (1.23 ± 0.45 mm) and test (0.98 ± 0.41 mm) groups with no significant differences between the groups. The average impulse of the control group was 4.74 ± 1.05 Ns. Torque generated by rotation in the test group was 9.07 ± 2.15 Ncm. Horizontal acceleration was significantly less in the test group (0.82 ± 1.05 g) than the control group (64.07 ± 42.62 g) (P engine-driven ridge spreaders. Within the limits of this study, the results suggested that an engine-driven ridge splitting technique may be less traumatic and less invasive than a conventional ridge splitting technique. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Growth of a tectonic ridge during the Landers earthquake

    Science.gov (United States)

    Fleming, R.W.; Johnson, A.M.

    1997-01-01

    The formation of tectonic ridges by localized vertical uplift along strike-slip faults has long been suspected, but the actual growth of a tectonic ridge during an earthquake has never been documented. During the 1992 Landers, California, earthquake sequence, an awl-shaped, dome-like topographic ridge along the Emerson fault zone increased its height at least 1 m concurrently with 3 m of right-lateral shift across the fault zone containing the ridge. Five deformation vectors within the ridge reveal dilatant behavior in addition to the uplift and shift on boundary faults.

  18. Ridge Preservation with Modified “Socket-Shield” Technique: A Methodological Case Series

    Directory of Open Access Journals (Sweden)

    Markus Glocker

    2014-01-01

    Full Text Available After tooth extraction, the alveolar bone undergoes a remodeling process, which leads to horizontal and vertical bone loss. These resorption processes complicate dental rehabilitation, particularly in connection with implants. Various methods of guided bone regeneration (GBR have been described to retain the original dimension of the bone after extraction. Most procedures use filler materials and membranes to support the buccal plate and soft tissue, to stabilize the coagulum and to prevent epithelial ingrowth. It has also been suggested that resorption of the buccal bundle bone can be avoided by leaving a buccal root segment (socket shield technique in place, because the biological integrity of the buccal periodontium (bundle bone remains untouched. This method has also been described in connection with immediate implant placement. The present case report describes three consecutive cases in which a modified method was applied as part of a delayed implantation. The latter was carried out after six months, and during re-entry the new bone formation in the alveolar bone and the residual ridge was clinically evaluated as proof of principle. It was demonstrated that the bone was clinically preserved with this method. Possibilities and limitations are discussed and directions for future research are disclosed.

  19. Proteinosis alveolar pulmonar

    Directory of Open Access Journals (Sweden)

    Concepción Sánchez Infante

    2011-12-01

    Full Text Available La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipoxemia, y, con imágenes radiológicas de tipo retículo-nodulillar, en vidrio deslustrado, en el cual se plantea inicialmente el diagnóstico de bronconeumonía. Ante la evolución desfavorable y no respuesta al tratamiento, se realizó un estudio para descartar enfermedades pulmonares crónicas. El paciente fallece y se confirma el diagnóstico por anatomía patológica. Se realiza una revisión del tema.

  20. Full mouth implants rehabilitation of a patient with ectodermal dysplasia after 3-Ds ridge augmentation. A clinical report

    Directory of Open Access Journals (Sweden)

    Hussein El Charkawi

    2016-06-01

    Full Text Available A 22-year-old female presented with hypodontia and severe atrophy of alveolar ridge associated with ectodermal dysplasia, was treated with 3Ds bone augmentation technique and full mouth implants rehabilitation. Bone blocks harvested from the retro molar area to construct adequate bone volume at posterior maxilla and mandible. The vertical and horizontal bone augmentation allowed proper implant placement according to prosthetically-driven implant placement concept. Ten implants were placed. Six in the maxilla and four implants were inserted in the mandible. A cement-retained full mouth metal ceramic FPDs were fabricated. The outcome of the treatment showed that dental implants placed in bone block grafts should be considered as a good treatment modality for patients with ectodermal dysplasia. It also, provided the patient with a prosthesis that enhanced the patient function and esthetics.

  1. Horizontal alveolar bone loss: A periodontal orphan

    Science.gov (United States)

    Jayakumar, A.; Rohini, S.; Naveen, A.; Haritha, A.; Reddy, Krishnanjeneya

    2010-01-01

    Background: Attempts to successfully regenerate lost alveolar bone have always been a clinician’s dream. Angular defects, at least, have a fairer chance, but the same cannot be said about horizontal bone loss. The purpose of the present study was to evaluate the prevalence of horizontal alveolar bone loss and vertical bone defects in periodontal patients; and later, to correlate it with the treatment modalities available in the literature for horizontal and vertical bone defects. Materials and Methods: The study was conducted in two parts. Part I was the radiographic evaluation of 150 orthopantomographs (OPGs) (of patients diagnosed with chronic periodontitis and seeking periodontal care), which were digitized and read using the AutoCAD 2006 software. All the periodontitis-affected teeth were categorized as teeth with vertical defects (if the defect angle was ≤45° and defect depth was ≥3 mm) or as having horizontal bone loss. Part II of the study comprised search of the literature on treatment modalities for horizontal and vertical bone loss in four selected periodontal journals. Results: Out of the 150 OPGs studied, 54 (36%) OPGs showed one or more vertical defects. Totally, 3,371 teeth were studied, out of which horizontal bone loss was found in 3,107 (92.2%) teeth, and vertical defects were found only in 264 (7.8%) of the teeth, which was statistically significant (P<.001). Search of the selected journals revealed 477 papers have addressed the treatment modalities for vertical and horizontal types of bone loss specifically. Out of the 477 papers, 461 (96.3%) have addressed vertical bone loss, and 18 (3.7%) have addressed treatment options for horizontal bone loss. Two papers have addressed both types of bone loss and are included in both categories. Conclusion: Horizontal bone loss is more prevalent than vertical bone loss but has been sidelined by researchers as very few papers have been published on the subject of regenerative treatment modalities for

  2. Effects of vascular formation during alveolar bone process morphogenesis in mice.

    Science.gov (United States)

    An, Seo-Young; Lee, Ye-Ji; Neupane, Sanjiv; Jun, Jong-Hwa; Kim, Ji-Youn; Lee, Youngkyun; Choi, Karp-Shik; An, Chang-Hyeon; Suh, Jo-Young; Shin, Hong-In; Sohn, Wern-Joo; Kim, Jae-Young

    2017-10-01

    The alveolar bone process is the thickened ridge of bone that bears the teeth and is known to have dynamic functional interactions with surrounding tissues. However, the detailed morphological changes that occur during alveolar bone process development and the underlying molecular mechanisms behind this morphogenesis have not been elucidated. In this study, we examined the detailed morphological changes of the alveolar bone process during mouse development using HE and MTC staining. In addition, we evaluated the precise localization pattern of various signaling molecules involved in blood vessel formation including CD31, α-SMA, VEGF, periostin, and TGF-β. Innervation of the alveolar bone process was examined following injection of the nerve terminal dye AM1-43. The morphological and immunohistochemical data suggested that there is an intimate relationship between alveolar bone process development and blood vessel formation. To more closely examine the role of blood vessels in alveolar bone process formation, we microinjected mice with a clinically available anti-VEGF antibody, bevacizumab, at PN5 and analyzed the effects 5 days later. Compared to the control animals, anti-VEGF treated animals showed a disruption of the integration of bony tissues to form the alveolar bone process structures, which should contain the periodontal ligaments. Based on these data, we conclude that specific morphogenesis of the alveolar bone process is closely associated with blood vessel formation.

  3. Anelastic Semigeostrophic Flow Over a Mountain Ridge

    National Research Council Canada - National Science Library

    Bannon, Peter R; Chu, Pe-Cheng

    1987-01-01

    ...) characterize the disturbance generated by the steady flow of a uniform wind (U0, V0) incident on a mountain ridge of width alpha in an isothermal, uniformly rotating, uniformly stratified, vertically semi-infinite atmosphere. Here mu = h(0)/H(R...

  4. Changes in alveolar bone support induced by the Herbst appliance: a tomographic evaluation

    Directory of Open Access Journals (Sweden)

    João Paulo Schwartz

    2016-04-01

    Full Text Available ABSTRACT Objective: This study evaluated alveolar bone loss around mandibular incisors, induced by the Herbst appliance. Methods: The sample consisted of 23 patients (11 men, 12 women; mean age of 15.76 ± 1.75 years, Class II, Division 1 malocclusion, treated with the Herbst appliance. CBCT scans were obtained before treatment (T0 and after Herbst treatment (T1. Vertical alveolar bone level and alveolar bone thickness of mandibular incisors were assessed. Buccal (B, lingual (L and total (T bone thicknesses were assessed at crestal (1, midroot (2 and apical (3 levels of mandibular incisors. Student's t-test and Wilcoxon t-test were used to compare dependent samples in parametric and nonparametric cases, respectively. Pearson's and Spearman's rank correlation analyses were performed to determine the relationship of changes in alveolar bone thickness. Results were considered at a significance level of 5%. Results: Mandibular incisors showed no statistical significance for vertical alveolar bone level. Alveolar bone thickness of mandibular incisors significantly reduced after treatment at B1, B2, B3, T1 and significantly increased at L2. The magnitude of the statistically significant changes was less than 0.2 mm. The changes in alveolar bone thickness showed no statistical significance with incisor inclination degree. Conclusions: CBCT scans showed an association between the Herbst appliance and alveolar bone loss on the buccal surface of mandibular incisors; however, without clinical significance.

  5. Long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allograft plus platelet-rich fibrin combination: A novel technique for ridge augmentation - Three case reports.

    Science.gov (United States)

    Reddy, Pathakota Krishnajaneya; Bolla, Vijayalakshmi; Koppolu, Pradeep; Srujan, Peruka

    2015-01-01

    Replacement of missing maxillary anterior tooth with localized residual alveolar ridge defect is challenging, considering the high esthetic demand. Various soft and hard tissue procedures were proposed to correct alveolar ridge deformities. Novel techniques have evolved in treating these ridge defects to improve function and esthetics. In the present case reports, a novel technique using long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allografts (DFDBAs) plus Platelet-rich fibrin (PRF) combination was proposed to correct the Class III localized anterior maxillary anterior alveolar ridge defect. The present technique resulted in predictable ridge augmentation, which can be attributed to the soft and hard tissue augmentation with a connective tissue pedicle and DFDBA plus PRF combination. This technique suggests a variation in roll technique with DFDBA plus PRF and appears to promise in gaining predictable volume in the residual ridge defect and can be considered for the treatment of moderate to severe maxillary anterior ridge defects.

  6. Long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allograft plus platelet-rich fibrin combination: A novel technique for ridge augmentation - Three case reports

    Directory of Open Access Journals (Sweden)

    Pathakota Krishnajaneya Reddy

    2015-01-01

    Full Text Available Replacement of missing maxillary anterior tooth with localized residual alveolar ridge defect is challenging, considering the high esthetic demand. Various soft and hard tissue procedures were proposed to correct alveolar ridge deformities. Novel techniques have evolved in treating these ridge defects to improve function and esthetics. In the present case reports, a novel technique using long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allografts (DFDBAs plus Platelet-rich fibrin (PRF combination was proposed to correct the Class III localized anterior maxillary anterior alveolar ridge defect. The present technique resulted in predictable ridge augmentation, which can be attributed to the soft and hard tissue augmentation with a connective tissue pedicle and DFDBA plus PRF combination. This technique suggests a variation in roll technique with DFDBA plus PRF and appears to promise in gaining predictable volume in the residual ridge defect and can be considered for the treatment of moderate to severe maxillary anterior ridge defects.

  7. Vertical bone augmentation procedures: basics and techniques in dental implantology.

    Science.gov (United States)

    Draenert, F G; Huetzen, D; Neff, A; Mueller, W E G

    2014-05-01

    An appropriate bony situation is essential for dental implant placement and bony support of soft tissues (pink esthetic). Loss of teeth often results in complex horizontal and vertical alveolar ridge defects. They demand advanced bone augmentation techniques for reconstruction. We present the different techniques and materials used in complex bone augmentation. Clinical cases show the application of the methods in the clinical setting. We present current techniques and materials used in complex bone augmentations. Clinical cases show the application of the methods in the clinical setting. Applied techniques include stabilized-guided bone regeneration (GBR), autologous local block augmentation, modified techniques such as Gellrich shell technique including piezosurgery, pelvic bone blocks, complex materials such as graft-derived bone blocks and their unique handling problems. Successful basic principles are reduction of cortical bone healing due to long remodeling time and possible late loss; extended application of materials with interconnecting porous system and particulate material resulting in fast healing analogous to cancellous bone; mechanical stabilization of the augmentation to allow bony healing in vertical defect situations. GBR and autologous bone blocks with minimal cortical thickness and a high volume of particulated material are most favorable techniques. Copyright © 2013 Wiley Periodicals, Inc.

  8. Mobilization of the inferior alveolar nerve with simultaneous implant insertion: a new technique. Case report.

    Science.gov (United States)

    Bovi, Mauro

    2005-08-01

    For reconstruction of an atrophied posterior mandible, different therapeutic options have been proposed, such as autologous bone grafting, guided bone regeneration for vertical ridge augmentation, and inferior alveolar nerve (IAN) mobilization with simultaneous implant placement. The possible dehiscence of soft tissues covering the surgical zone makes the first and second techniques unpredictable. Moreover, two surgical sites are necessary and a long treatment time is required (about 12 months). With IAN mobilization, only one surgical intervention is required and the total treatment time is shorter (about 6 months). However, this technique risks irreversible damage to the IAN, with consequent functional alterations. Current studies have shown extreme variability in the examination of functionality of the neurovascular bundle after its mobilization. This variability can be attributed both to the methodology used for the tests, which evoke subjective answers from the patient, and to the surgical procedure, which is highly dependent on operator technique. Nerve damage can be the result of an overstretched mucoperiosteal flap in the premolar area to achieve optimal visibility of the surgical zone. This article reports a case in which a new surgical approach to IAN mobilization is performed using a specifically engineered device for simplified bone surgery (Mectron Piezosurgery). This device enables the surgeon to cut hard tissue without injuring the soft tissues. Therefore, there is a lower risk of damaging the IAN, and it is possible to reduce overstretching of the mental nerve by creating a smaller bone window and using an apicocoronal inclination of instruments to capture the neurovascular bundle.

  9. Ridge augmentation with soft tissue procedures in aesthetic dentistry: pre- and postoperative volume measurements with a new kind of moire technique

    Science.gov (United States)

    Studer, Stephan P.; Mueller, Ernst; Bucher, Alfred

    1993-09-01

    The aim of this paper was to measure the volume differences of operated alveolar ridge defects before and until 3 months post-surgically. Ten patients with ten localized alveolar ridge defects were operated on. Five alveolar ridge defects were corrected by using the full thickness onlay graft technique and the other five defects were operated by the subepithelial connective tissue graft technique. A strict standardized operation protocol was followed and all alveolar ridge defects were operated on by the same dental surgeon. Before as well as 1, 2, and 3 months after surgery the corrected defect was photographed and an impression was made by using an A-silicon material to produce a gypsum-cast model. The form of all these cast models was then measured using the moire technique. The three months result of ten cases shows that the form of the operated alveolar ridge defects, which were corrected by the subepithelial connective tissue graft technique are more stable compared to those which were operated on by the full thickness onlay graft technique. Localized alveolar ridge defects using the latter method does not show a form stability after 3 months post-surgically.

  10. [Study of anterior alveolar bone thickness in skeletal class III malocclusion patients with orthognathic surgery].

    Science.gov (United States)

    Zhang, Jie; Li, Xiao-tong

    2016-02-18

    To investigate the compensation of the anterior alveolar bone thickness in skeletal class III patients treated with orthodontic-surgical treatment. The samples consisted of 54 skeletal class III patients treated with orthodontic-surgical treatment. Lateral cephalograms were taken before treatment. Descriptive statistics were calculated for corresponding variables, and the differences between the samples and the norms from Peking University normal occlusion sample library were assessed by independent-sample t test. Correlation analyses were performed to find associations between skeletal characteristics and anterior alveolar bone thickness. According to skeletal anteroposterior discrepancy/vertical type (ANB, criteria=-4°; SN-MP, criteria=37.7°), the samples were allocated into group A (severe anteroposterior discrepancy/hypodivergent vertical type, n=11), group B (moderate anteroposterior discrepancy/hypodivergent vertical type, n=16), group C (severe anteroposterior discrepancy/hyperdivergent vertical type, n=14), and group D (moderate anteroposterior discrepancy/hyperdivergent vertical type, n=13),and one-way ANOVA with SNK multiple comparison test were performed. The anterior alveolar bone thickness of the skeletal class III patients were thinner compared with norm values (Pclass III patients are thinner compared with normal occlusion. Different skeletal anteroposterior discrepancy/vertical type results in differences in the anterior alveolar bone thickness, so decompensation should be treated differently and carefully.

  11. Ridge and Furrow Fields

    DEFF Research Database (Denmark)

    Møller, Per Grau

    2016-01-01

    Ridge and furrow is a specific way of ploughing which makes fields of systematic ridges and furrows like a rubbing washboard. They are part of an overall openfield system, but the focus in this paper is on the functionality of the fields. There are many indications that agro-technological reasons...

  12. Diagnosis of alveolar and root fractures: an in vitro study comparing CBCT imaging with periapical radiographs

    Directory of Open Access Journals (Sweden)

    Solange KOBAYASHI-VELASCO

    Full Text Available Abstract Objective To compare periapical radiograph (PR and cone-beam computed tomography (CBCT in the diagnosis of alveolar and root fractures. Material and Methods Sixty incisor teeth (20 higid and 40 with root fracture from dogs were inserted in 60 anterior alveolar sockets (40 higid and 20 with alveolar fracture of 15 macerated canine maxillae. Each fractured socket had a root fractured tooth inserted in it. Afterwards, each maxilla was submitted to PR in two different vertical angulation incidences, and to CBCT imaging with a small field of view (FOV and high-definition protocol. Images were randomized and posteriorly analyzed by two oral and maxillofacial radiologists two times, with a two-week interval between observations. Results Sensitivity and specificity values were good for root fractures for PR and CBCT. For alveolar fractures, sensitivity ranged from 0.10 to 0.90 for PR and from 0.50 to 0.65 for CBCT. Specificity for alveolar fractures showed lower results than for root fractures for PR and CBCT. Areas under the ROC curve showed good results for both PR and CBCT for root fractures. However, results were fair for both PR and CBCT for alveolar fractures. When submitted to repeated measures ANOVA tests, there was a statistically significant difference between PR and CBCT for root fractures. Root fracture intraobserver agreement ranged from 0.90 to 0.93, and alveolar fracture intraobserver agreement ranged from 0.30 to 0.57. Interobserver agreement results were substantial for root fractures and poor/fair for alveolar fractures (0.11 for PR and 0.30 for CBCT. Conclusion Periapical radiograph with two different vertical angulations may be considered an accurate method to detect root fractures. However, PR showed poorer results than CBCT for the diagnosis of alveolar fractures. When no fractures are diagnosed in PR and the patient describes pain symptoms, the subsequent exam of choice is CBCT.

  13. Bone changes in ridge split with immediate implant placement: A systematic review

    Directory of Open Access Journals (Sweden)

    Mohamed M. Dohiem

    2015-12-01

    Conclusion: Alveolar ridge splitting might be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain and minimal postoperative complications. Weak evidence showed the effect of flap design and immediate implantation on marginal bone loss and survival rate.

  14. Augmentation of localized defects of the anterior maxillary ridge with autogenous bone before insertion of implants

    NARCIS (Netherlands)

    Raghoebar, GM; Batenburg, RHK; Vissink, A; Reintsema, H

    1996-01-01

    Purpose: This study evaluated the applicability of intraorally harvested autogenous bone grafts for the augmentation of the narrow maxillary alveolar ridge to enable insertion of implants for single tooth replacement. Materials and Methods: Local defects of the anterior maxilla were reconstructed in

  15. Displasia alveolar congénita Congenital alveolar dysplasia

    OpenAIRE

    D.P. Sánchez Hernández; M.M. Suárez Galvis; M.T. García Vélez; A. Uribe Molina

    2012-01-01

    La displasia alveolar congénita es una patología congénita poco frecuente caracterizada por disminución de las unidades alveolares y anormalidades del desarrollo de la vasculatura pulmonar. Esta entidad produce hipertensión pulmonar severa e hipoxemia persistente con una evolución mortal en la mayoría de los casos. Afecta generalmente a recién nacidos a término, con un test de Apgar normal, que posteriormente desarrollan dificultad respiratoria, habitualmente en el primer día de vida. La enfe...

  16. Treatment of sharp mandibular alveolar process with hybrid prosthesis

    Directory of Open Access Journals (Sweden)

    Sukaedi Sukaedi

    2010-09-01

    Full Text Available Background: Losing posterior teeth for a long time would occasionally lead to the sharpening of alveolar process. The removable partial denture usually have problems when used during mastication, because of the pressure on the mucosa under the alveolar ridge. Purpose: The purpose of this case report was to manage patients with sharp mandibular alveolar process by wearing hybrid prosthesis with extra coronal precision attachment retention and soft liner on the surface base beneath the removable partial denture. Case: A 76 years old woman visited the Prosthodontic Clinic Faculty of Dentistry Airlangga University. The patient had a long span bridge on the upper jaw and a free end acrylic removable partial denture on the lower jaw. She was having problems with mastication. The patient did not wear her lower denture because of the discomfort with it during mastication. Hence, she would like to replace it with a new removable partial denture. Case management: The patient was treated by wearing a hybrid prosthesis with extra coronal precision attachment on the lower jaw. Soft liner was applied on the surface of the removable partial denture. Hybrid prosthesis is a complex denture consisting of removable partial denture and fixed bridge. Conclusion: It concluded that after restoration, the patient had no problems with sharp alveolar process with her new denture, and she was able to masticate well.Latar belakang: Kehilangan geligi posterior dapat menimbulkan processus alveolaris tajam. Gigi tiruan sebagian lepasan mempunyai masalah selama pengunyahan karena adanya tekanan di mukosa di bawah alveolar ridge. Tujuan: Tujuan laporan kasus ini adalah untuk menjelaskan cara menangani pasien yang mempunyai prosesus alveolaris yang tajam di rahang bawah dengan dibuatkan protesis hybrid dengan daya tahan extra coronal precision attachment dan soft liner di permukaan bawah basis gigi tiruan sebagian lepasan. Kasus: Pasien wanita berumur 76 tahun datang di klinik

  17. Genetics Home Reference: pulmonary alveolar microlithiasis

    Science.gov (United States)

    ... the lung tissue and makes breathing easy. The recycling of surfactant releases phosphate into the alveoli. Research ... Diseases Information Center (1 link) Pulmonary alveolar microlithiasis Educational Resources (3 links) Disease InfoSearch: Pulmonary alveolar microlithiasis ...

  18. Ridge augmentation with titanium mesh: A case report.

    Science.gov (United States)

    Jegham, H; Masmoudi, R; Ouertani, H; Blouza, I; Turki, S; Khattech, M B

    2017-06-01

    Insufficient bone volume for dental implant placement in the maxillary anterior segment is a constant challenge in oral surgery. Several techniques have been suggested to reconstruct deficient alveolar ridges and to facilitate dental implant placement. These techniques include bone splitting osteotomy, distraction osteogenesis, inlay and onlay bone grafting. Guided bone regeneration (GBR) is also a promising alternative that increases the bone volume by the use of a subperiosteal barrier. The aim of this case was to demonstrate that the use of rigid titanium occlusive barrier is a reliable alternative to perform a lateral alveolar bone augmentation and treat localized ridge deformities before reaching an ideal implant placement. A 25-year-old healthy male was referred for implant placement in the maxillary central incisor. The alveolar bone width at the implant site 21 was less than 5mm. Hard tissue augmentation was accomplished using guided bone regeneration. A rigid titanium occlusive barrier was customized to desired shape of future alveolar ridge then secured with tent and fixing screws. Autogenous bone graft harvested with an auto-chip-maker adjacent to the surgical site were mixed with a xenograft and putted under the barrier. The wound was closed using a vestibular mucoperiosteal flap. At 4 months, the rigid barrier was removed, and a 7mm crestal width transversal bone was observed. At the same time, a fixture (4×10mm) was placed. A definitive ceramometal crown was completed after full osseointegration with periodical clinical maintenance. The exposure of the titanium mesh occurred in this case and was visible with a circular flap dehiscence at 1-month follow-up visit. This exposure did not affect the successful regenerative outcomes. After removal of the titanium mesh from the grafted defects, the space beneath the membrane enclosure was seen to be almost completely filled with new hard tissue covered by a thin layer of soft tissue. The postoperative

  19. Distance of the alveolar antral artery from the alveolar crest. Related factors and surgical considerations in sinus floor elevation

    Science.gov (United States)

    Varela-Centelles, Pablo; Loira-Gago, María; Gonzalez-Mosquera, Antonio; Seoane-Romero, Juan M.; Garcia-Martin, José M.

    2016-01-01

    Background In a variable proportion of maxillary sinuses alveolar antral artery is located close to the residual ridge, increasing the chances for haemorrhagic complications during sinus floor elevation procedures. Material and Methods Retrospective observational study of CBCT explorations performed for implant-treatment planning. The upper first molar area was selected for this study. The relative uncertainty (standard deviation of the measurement divided by its mean and expressed as a percentage from 0% to 100%) was chosen for determining the observational errors. For modeling the chances of AAA detection, the generalized additive models (GAM) approach was chosen. Results A total of 240 maxillary sinuses were studied (46.25% males) whose median median age was 58 years old (IQR: 52-66). Univariate models showed that the chances for an AAA-alvelar crest distance ≤15mm increase in wider sinuses with lower, subsinusally edentulous crests. When distance is considered as a continuous variable, the best mutivariate model showed an explained deviance of 67% and included AAA diameter, distance AAA-sinus floor, sinus width, and shape, height and width of the residual ridge. Thinner AAAs are found closer to the crest (within the ≤15mm safe distance). Conclusions Bearing in mind the inclusion criteria and the limitations of this investigation, it is concluded that there is a high proportion of maxillary sinuses where AAA describes a course close to the alveolar crest (≤15mm), which was classically considered a safe distance for SFE. This position is related to the presence of atrophic crests (depressed ridge form) and wide maxillary sinuses where the distance of the vessel to the floor of the sinus is small. This information may permit a better surgical planning of SFE procedures. Key words:Cone-beam computed tomography, blood vessels, sinus floor augmentation, intraoperative complications. PMID:27694790

  20. Human alveolar echinococcosis in Kyrgyzstan.

    Science.gov (United States)

    Usubalieva, Jumagul; Minbaeva, Gulnara; Ziadinov, Iskender; Deplazes, Peter; Torgerson, Paul R

    2013-07-01

    Human echinococcosis is a reportable disease in Kyrgyzstan. Between 1995 and 2011, human alveolar echinococcosis increased from 60 cases per year. The origins of this epidemic, which started in 2004, may be linked to the socioeconomic changes that followed the dissolution of the former Soviet Union.

  1. True Fibroma of Alveolar Mucosa

    Directory of Open Access Journals (Sweden)

    Shankargouda Patil

    2014-01-01

    Full Text Available Benign fibrous overgrowths are often found in the oral cavity, almost always being reactive/irritational in nature. However, benign mesenchymal neoplasms of the fibroblasts are extremely uncommon. Here we report a case of “True Fibroma of Alveolar Mucosa” for its rarity.

  2. Pulmonary alveolar proteinosis: analysis of airway and alveolar proteins.

    Science.gov (United States)

    Bell, D Y; Hook, G E

    1979-06-01

    Lavage effluents from the lungs of patients with pulmonary alveolar proteinosis were analyzed for soluble constitutents. Antiserums monospecific for normal plasma components, C-reactive protein, and secretory piece were used to investigate the presence of these proteins in lavage effluent, wheras 2-dimensional polyacrylamide gel electrophoresis provided a comprehensive map of the major proteins that were present. The proteins of lung washing obtained from normal subjects and of patient and normal serums were similarly analyzed. Most of the soluble-phase proteins from lavage of patients with pulmonary alveolar proteinosis were also found in patient serum, and were present in amounts consistent with a theory that they originate from the plasma by passage through channels of approximately normal size and selectivity. This findings suggests that the abundant soluble protein found in the alveoli of the lungs of these patients does not arise by leakage through a serverly damaged blood-air barrier. Patients had in their lung lavage effluents 2 soluble proteins of molecular weights 47,000 and 52,000 daltons not found in their serum and not present in lung washings from normal subjects. Uniformly increased concentrations of immunoglobulins in patient lavage effluent, abnormal immunoglobulin concentrations in patient serum, and the presence of C-reactive protein in the serum from 4 of 5 patients indicate a response of the immune system to the disease process and suggest that an atypical hypersensitivity reaction may be involved.

  3. Effect of platelet-rich plasma in alveolar distraction osteogenesis: a controlled clinical trial.

    Science.gov (United States)

    Menezes, Diogo J B; Shibli, Jamil Awad; Gehrke, Sergio Alexandre; Beder, Andréa M; Sendyk, Wilson R

    2016-01-01

    We have evaluated the effect of the use of platelet-rich plasma in alveolar distraction osteogenesis. Fourteen patients who were partly edentulous in the anterior premaxilla region were selected and randomised into two groups (n=7 in each group). Those in the experimental group were give platelet-rich plasma at the time of distraction, and the control group had only distraction. Selected cases had defects in the alveolar ridge of more than 3mm, and a minimal bone height of 7 mm from the alveolar ridge crest to important anatomical structures. The plaque index and gingival index were recorded on days 3, 7, 14, 21, 28, 45, 60, 75, 90, and 105 postoperatively. There was a strong negative correlation between the gingival index and augmentation of bone, and a strong positive correlation between the mean gingival index and loss of bone from the transported segment. The addition of platelet-rich plasma had a protective effect on the mucosa around the distractor, which decreased the potential for complications. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  4. Minimally invasive ridge augmentation using xenogenous bone blocks in an atrophied posterior mandible: a clinical and histological study.

    Science.gov (United States)

    Li, Jingxu; Xuan, Feng; Choi, Byung-Ho; Jeong, Seung-Mi

    2013-04-01

    Although various techniques for the treatment of an atrophic alveolar ridge have been described in the literature, these procedures have increased the morbidity and discomfort for the patient. The purpose of this study was to evaluate histological and clinical results in 9 patients who underwent a subperiosteal tunneling procedure with a Bio-Oss block onlay graft in an atrophic area of the mandible. Nine months after grafting, at the time of dental implantation, biopsy samples were taken from the grafted areas of 9 patients and were analyzed histologically. New bone formation through the bovine bone block was observed consistently in the 9 cases. There was direct deposition of bone on the surface of the graft material. The results of this study indicated that ridge augmentation using a subperiosteal tunneling procedure with Bio-Oss bone blocks might be useful for implant placement in the atrophic alveolar ridges.

  5. The effect of alendronate on resorption of the alveolar bone following tooth extraction.

    Science.gov (United States)

    Altundal, H; Güvener, O

    2004-04-01

    Maintenance of alveolar bone width and height following tooth loss is essential with regard to the restoration of missing teeth with endosseous dental implants or prosthodontics approaches. A various amount of alveolar ridge resorption is likely to occur after tooth extraction at the buccal and lingual alveolar bone plates. Bisphosphonates, alendronate, is well known for its potent inhibition of osteoclast-mediated bone resorption. The objective of this study was to examine the inhibitory effect of alendronate on alveolar bone resorption following tooth extraction in rats. Male Wistar Albino rats were divided into three groups: baseline group, saline-treated group and alendronate-treated group. The saline-treated group was administered with daily saline solution for 2 and 4 weeks respectively while the alendronate-treated group was given a daily amount of 0.25 mg/kg alendronate subcutaneously for the same periods. The level of urinary calcium, creatinine, and serum calcium, alkaline phosphatase and phosphate were measured. Serum alkaline phosphatase level was measured as a marker of osteoblastic activity. Histopathological sections of 4 microm thickness were obtained from the right first mandibular molar region in a bucco-lingual direction. The number of osteoclasts, osteoblasts, and haversian canals, the number and size of resorptive lacunae, and osteoid formation were evaluated histopathologically. The mean thickness of buccal and lingual alveolar bone was measured. In the alendronate-treated group, both buccal and lingual alveolar bone volume reduction was significantly less than the saline treated group. Significant reduction in serum and urinary calcium levels and the number of osteoclasts revealed the pronounced suppression of bone resorption in the alendronate-treated group.

  6. [Psychological impact of alveolar mandibular distraction].

    Science.gov (United States)

    Castry, G; Ella, B; Emparanza, A; Siberchicot, F; Zwetyenga, N

    2009-11-01

    Implant supported dental prostheses are the most up-to-date solution for edentulous patients. This technique requires and adequate bone quantity and quality. Bone distraction may allow compensating for some bone deficit, especially mandibulary. Few studies have been dedicated to how patients adjusted to this therapy (Int J oral Maxillofac Surg 34 [2005] 238-42, Int J oral Maxillofac Surg 36 [2007] 896-9, Med Oral Pathol Oral Cir Bucal 12 [2007] E225-8). We evaluated the psychological impact of alveolar mandibular distraction. Between 1999 and 2006, 31 patients aged 27 to 70 years underwent vertical alveolar mandibular distraction. Seventeen patients (54.8%) presented with complications. A questionnaire assessed the psychological impact by using notions used in healthcare psychology: perceived stress, perceived control, and social support. Twenty-three answers (74.2% of operated cases) were studied. In 87% of the cases, patients adjusted well the distraction procedure. Eighty-one percent felt no stress. Fifty-seven percent reported light to moderate pain, and 43% found the treatment painful. Confrontation to adverse events was mentioned only in 13% of the cases. In 17% of the cases, there was a slight alteration of sleep. Fifty-seven percent of the patients managed to forget the presence of the distractor. The most difficult stages were insertion of the distractor (48%) and the activation phase (17%). Seventy-one percent of the patients did not find the protocol restraining. The treatment length was not a problem for 65%. Two patients (9%) found it too long. Ninety-one percent of the patients activated the device on their own, for two (9% of the cases) the surgeon activated the device. Ninety-seven percent of the patients found supervision satisfactory. Medical information helped to adjust well to the procedure in 96% of the cases. Forty-three percent of the patients (10 cases) required specific help during the treatment: family support, attending physician, or

  7. Intracranial alveolar echinococcosis: CT and MRI

    Energy Technology Data Exchange (ETDEWEB)

    Bensaid, A.H. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Dietemann, J.L. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Filippi de la Palavesa, M.M. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Klinkert, A. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Kastler, B. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Gangi, A. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Jacquet, G. (Dept. of Neurosurgery, Univ. Hospital, Besancon (France)); Cattin, F. (Dept. of Radiology, Univ. Hospital, Besancon (France))

    1994-05-01

    Intracranial alveolar echinococcosis is uncommon. We report a patient with right frontal lobe and palpebral lesions secondary to a primary hepatic focus with secondary lesion in the lung. The intracranial and palpebral cystic masses were totally removed and both proved to be alveolar hydatid cysts. An unusual feature in this case is CT and MRI demonstration of dural and bony extension. (orig.)

  8. Alveolar bone preservation subsequent to miniscrew implant placement in a canine model

    DEFF Research Database (Denmark)

    Melsen, Birte; Huja, Sarandeep; Chien, Hua-Hong

    2015-01-01

    Abstract OBJECTIVE: To assess the effects of transcortical screws on alveolar (bone) ridge preservation following extraction. DESIGN: Four adult beagle dogs had mandibular premolars extracted bilaterally. After 6 weeks, using a split-mouth design, two transcortical screws were inserted unilaterally...... below the alveolar crest on the experimental side in the region of the extraction. The dogs were killed after 12 weeks. The bone at the extraction sites was analyzed using μCT and 3D analysis. A cylindrical core was placed around the actual and a virtual screw placed in the identical location...... implant placement on both sides, the bone preservation on the experimental side led to a need for a shorter clinical crown compared to the control side. A higher activity level of the bone in the experimental side was demonstrated histologically. CONCLUSION: In this dog model the insertion of a mini...

  9. The Greenland-Iceland-Faroe Ridge Complex

    Science.gov (United States)

    Erlendsson, Ögmundur; Hjartarson, Árni; Blischke, Anett

    2017-04-01

    The Greenland-Iceland-Faroe Ridge Complex GIFRC covers 480.000 km2 of a thick volcanic crust that stretches 1150 km across the central Northeast Atlantic Ocean between the central East Greenland and the Northwest European margins. It incorporates the Iceland plateau, the aseismic Greenland-Iceland ridge, and the Iceland-Faroe ridge. GIFRC has been in development since the opening of the NE-Atlantic around 55 Ma. It appears as a prominent feature in all geological and geophysical data sets. Synclines and anticlines in the area will be summarised and, among others, several new ones that were revealed in seismic reflection data near to Iceland. Specifically, the offshore anticlines and synclines may be related to old rift systems prior the forming of Iceland as an insular shelf region (>24 Ma). Synclines are suggested to be manifestations of former rift axes that have been abandoned by rift jumps. These rift jumps appear to be more common inside the GIFRC region than in the ocean basins south and north of the area. They can be confirmed by the observation of cumulative crustal accretion through time as well. The GIFRC represents a complex region of crustal accretion in 3 dimensions due to overlapping rift systems, complex interlinked rift and transform zones, and several unconformities that suggest a variable uplift and subsidence history for the ridge complex. An excellent example to visualise such processes of vertical crustal accretion and rift jumps is seen in seismic reflection data that extends along the southwestern slope of the Iceland-Faroe Ridge. They clearly display the internal structures of basement blocks, separated by a syncline and younger rift system, and the formation of an anticline across the deeply buried basement blocks that are overlain by seaward dipping reflectors (SDR). We suggest a major hiatus (40 Ma - 24-20 Ma) and a related unconformity at the boundary of the volcanic insular shelf edge of East Iceland and the Faroe Ridge, buried beneath

  10. Volumetric Changes in Edentulous Alveolar Ridge Sites Utilizing Guided Bone Regeneration and a Custom Titanium Ridge Augmentation Matrix (CTRAM)

    Science.gov (United States)

    2016-06-01

    1959 (Hurley, Figure 3 6 1959) using occlusive membranes to cover bone grafts during spinal fusion procedures on dogs . Buser (1993) developed a...other than the patient. It has been used for decades in dental and orthopedic surgery, both in small particle or block form. In dentistry , allograft

  11. Distracción osteogénica. Una alternativa para la reconstrucción de rebordes alveolares en sector mandibular. Meta-análisis

    Directory of Open Access Journals (Sweden)

    Iván Manotas

    2013-10-01

    Full Text Available Title: Distraction osteogenic. An alternative for reconstruction in sector mandibular alveolar ridge. Meta-analysis.ResumenLa distracción osteogénica es una técnica quirúrgica utilizada para la reconstrucción de reborde alveolar, para incrementar cantidades de hueso y tejidos blandos como consecuencia del desplazamiento gradual de fracturas óseas quirúrgicamente realizadas. Como las técnicas de distracción generan hueso nuevo y evitan por tanto la morbilidad del traslado de injertos, se trata de un procedimiento que presenta muchas ventajas en comparación con los otros tipos de tratamientos realizados en esta clase de deformidades óseas. Mediante este artículo de revisión de literatura queremos demostrar que es el tratamiento ideal cuando se trata de reducir la deformidad ósea. (DUAZARY 20112 No. 1, 49 - 59AbstractDistraction osteogenesis is a surgical technique which is used for the reconstruction of the alveolar ridge, to increase amounts of bone and soft tissue due to the gradual displacement of bone fractures surgically performed. Because distraction techniques generate new bone avoids the morbidity of moving grafts, this technique has many advantages over other types of treatment carried out in such bone deformities, which by this article were view literature demonstrate that the treatment issue when it comes to reducing bone deformity.Keywords: Osteogénesis distraction; alveolar ridge augmentation; bone lengthening.

  12. Alveolar bone morphology of maxillary central incisors near grafted alveolar clefts after orthodontic treatment.

    Science.gov (United States)

    Yatabe, Marilia; Natsumeda, Gabriela Manami; Miranda, Felicia; Janson, Guilherme; Garib, Daniela

    2017-10-01

    The aim of this study was to evaluate the thickness and the height of the maxillary central incisors' alveolar bone near the grafted alveolar cleft area, after comprehensive orthodontic treatment. The sample comprised 30 patients with unilateral alveolar cleft with a mean age of 20.5 years (range, 17-25.8 years). High-resolution cone-beam computed tomography images of the maxilla were obtained 6 to 24 months after the comprehensive orthodontic treatment. The contralateral maxillary central incisor was used as a comparison group. Axial sections at the level of the central incisor root were used to measure the labial and lingual alveolar bone thicknesses. Cross sections were used to measure the bone crest heights using the cementoenamel junction as the reference. Paired t and Wilcoxon tests were used to compare the cleft and noncleft sides. The labial and lingual bone thicknesses of the maxillary central incisors' alveolar bone were significantly thinner (0.16 and 0.39 mm, respectively), and the labial alveolar crest height distance was significantly greater on the cleft side compared with the noncleft side (-1.2 mm). In patients with unilateral cleft lip and palate, the maxillary central incisors adjacent to the grafted alveolar cleft had thinner labial and lingual alveolar bones and an apically displaced labial alveolar crest level than the controls. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  13. [Applications of minimally invasive bone splitting technique in cases with missing maxillary anterior teeth and obvious labial alveolar bone depression for dental implantation].

    Science.gov (United States)

    Bao, Ji-Bo; Xiao, Xu-Hui; Xie, Zhi-Gang; Xie, Liang-Kun; Li, Zi-Liang

    2016-12-01

    The purpose of this study was to introduce a minimally invasive bone splitting technique which is suitable for cases with missing anterior teeth and obvious depression of alveolar bone in labial side, and to evaluate its clinical results. Minimally invasive bone splitting technique was used in 8 healthy adults with bone defects in the aesthetic zone. The labial alveolar bone incisions were confined around the bone defects which were smaller than traditional incisions. The other procedures were the same as conventional bone splitting technique. Cone-beam CT (CBCT) for missing anterior teeth was taken before surgery, after the surgery and 6 months after surgery and alveolar bone height and width were recorded with landmark identification designed by ourselves in this study. The data were analyzed with SPSS 21.0 software package for paired t test. Paired t test indicated that after surgery and six months after surgery, the labial bone defect was significant improved (Pbone didn't increase significantly (P>0.05) while the width of the alveolar ridge bone significant improved (P>0.05). This minimally invasive technique can achieve good clinical results for not only intact labial alveolar ridge bones but also good bone grafts, which is beneficial to implantation and prosthetic aesthetics. The long-term outcome needs to be observed.

  14. Alveolar bone changes after asymmetric rapid maxillary expansion.

    Science.gov (United States)

    Akin, Mehmet; Baka, Zeliha Muge; Ileri, Zehra; Basciftci, Faruk Ayhan

    2015-09-01

    To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P ARME significantly reduced the BABH of the canines (P ARME also increased the incidence of dehiscence and fenestration on the affected side. ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.

  15. Four stages of pressure ridging

    Science.gov (United States)

    Hopkins, Mark A.

    1998-09-01

    The pressure ridging process is simulated using a two-dimensional particle model. Blocks are broken from an intact sheet of relatively thin lead ice pushed against a thick, multiyear floe at a constant speed. The blocks of ice rubble accumulate to form the ridge sail and keel. During the simulations the energy consumed in ridge growth, including dissipation, is explicitly calculated. On the basis of the results of simulations performed with the model, the ridging process can be divided into four distinct stages. The first stage begins with an intact sheet of lead ice impacting a floe and ends when the sail reaches its maximum height. In the second stage the ridge keel deepens and widens. The stage ends when the maximum keel draft is reached. In the third stage the direction of growth is leadward creating a rubble field of more or less uniform thickness. The third stage ends when the supply of thin ice is exhausted. In the fourth stage the rubble field is compressed between converging floes. The results of simulations establish the dependence of ridging energetics in the first and second stages on the thickness of the ice sheet and the amount of ice pushed into the ridge. The average profiles of the simulated ridges delineate the growth process in the first, second, and third stages. The energetics and profiles of the fourth stage were described by Hopkins et al. [1991]. Lead ice extents of up to 1300 m are pushed into ridges to determine maximum sail heights, keel drafts, and ridging forces.

  16. Is ridge preservation/augmentation at periodontally compromised extraction sockets safe? A retrospective study.

    Science.gov (United States)

    Kim, Jung-Ju; Ben Amara, Heithem; Schwarz, Frank; Kim, Hae-Young; Lee, Jung-Won; Wikesjö, Ulf M E; Koo, Ki-Tae

    2017-10-01

    This study aimed to evaluate the safety of ridge preservation/augmentation procedures when performed at compromised extraction sockets. Patients subject to ridge preservation/augmentation at periodontally compromised sockets at Seoul National University Dental Hospital (SNUDH) were evaluated in a chart review. Tooth extractions due to acute infection were not included in our study as chronically formed lesions are the only lesions that can be detected from radiographic images. If inflammatory symptoms persisted following ridge preservation/augmentation and antimicrobial and anti-inflammatory therapy, the patient was categorized as a re-infection case and implanted biomaterial removed. Of 10,060 patients subject to tooth extractions at SNUDH, 2011 through 2015, 297 cases meeting inclusion criteria were reviewed. The severity and type of lesions were not specific because extracting data was only done by radiographic images and chart records. The review identified eight patients exhibiting inflammatory symptoms that required additional antimicrobial and anti-inflammatory therapy. Within this group, re-infection occurred in two patients requiring biomaterials removal. The final safety rate for the ridge preservation/augmentation was 99.3%. None of the demographic factors, systemic conditions or choice of biomaterial affected the safety of ridge preservation/augmentation. Alveolar ridge preservation/augmentation at periodontally compromised sockets appears safe following thorough removal of infectious source. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Seismic imaging of the Formosa Ridge cold seep site offshore of southwestern Taiwan

    Science.gov (United States)

    Hsu, Ho-Han; Liu, Char-Shine; Morita, Sumito; Tu, Shu-Lin; Lin, Saulwood; Machiyama, Hideaki; Azuma, Wataru; Ku, Chia-Yen; Chen, Song-Chuen

    2017-12-01

    Multi-scale reflection seismic data, from deep-penetration to high-resolution, have been analyzed and integrated with near-surface geophysical and geochemical data to investigate the structures and gas hydrate system of the Formosa Ridge offshore of southwestern Taiwan. In 2007, dense and large chemosynthetic communities were discovered on top of the Formosa Ridge at water depth of 1125 m by the ROV Hyper-Dolphin. A continuous and strong BSR has been observed on seismic profiles from 300 to 500 ms two-way-travel-time below the seafloor of this ridge. Sedimentary strata of the Formosa Ridge are generally flat lying which suggests that this ridge was formed by submarine erosion processes of down-slope canyon development. In addition, some sediment waves and mass wasting features are present on the ridge. Beneath the cold seep site, a vertical blanking zone, or seismic chimney, is clearly observed on seismic profiles, and it is interpreted to be a fluid conduit. A thick low velocity zone beneath BSR suggests the presence of a gas reservoir there. This "gas reservoir" is shallower than the surrounding canyon floors along the ridge; therefore as warm methane-rich fluids inside the ridge migrate upward, sulfate carried by cold sea water can flow into the fluid system from both flanks of the ridge. This process may drive a fluid circulation system and the active cold seep site which emits both hydrogen sulfide and methane to feed the chemosynthetic communities.

  18. [Cleft lip, alveolar and palate sequelae. Proposal of new alveolar score by the Alveolar Cleft Score (ACS) classification].

    Science.gov (United States)

    Molé, C; Simon, E

    2015-06-01

    The management of cleft lip, alveolar and palate sequelae remains problematic today. To optimize it, we tried to establish a new clinical index for diagnostic and prognostic purposes. Seven tissue indicators, that we consider to be important in the management of alveolar sequelae, are listed by assigning them individual scores. The final score, obtained by adding together the individual scores, can take a low, high or maximum value. We propose a new classification (ACS: Alveolar Cleft Score) that guides the therapeutic team to a prognosis approach, in terms of the recommended surgical and prosthetic reconstruction, the type of medical care required, and the preventive and supportive therapy to establish. Current studies are often only based on a standard radiological evaluation of the alveolar bone height at the cleft site. However, the gingival, the osseous and the cellular areas bordering the alveolar cleft sequelae induce many clinical parameters, which should be reflected in the morphological diagnosis, to better direct the surgical indications and the future prosthetic requirements, and to best maintain successful long term aesthetic and functional results. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  19. Comparison between implants inserted into piezo split and unsplit alveolar crests.

    Science.gov (United States)

    Danza, Matteo; Guidi, Riccardo; Carinci, Francesco

    2009-11-01

    Piezoelectric surgery (PES) uses a modulated ultrasonic frequency that permits highly precise and safe hard tissue cutting. A retrospective study on a series of spiral family implants inserted with or without PES split crest was performed to verify if implants inserted into crests split using PES have a comparable outcome to those inserted into unsplit bone. In the period from May 2004 to November 2007, 86 patients (55 women and 31 men, median age 53 yrs) were operated on and 234 spiral family implants were inserted. Among these, 21 were inserted into PES split crest. Mean follow-up was 13 months (3 to 35 months). The Kaplan-Meier algorithm was used to compare the 2 groups in survival and clinical success (ie, decreased bone resorption around implant neck). Only 9 of 234 implants were lost (ie, survival rate 96.2%), all of which belonged to the unsplit group but no statistical difference was demonstrated. To detect if PES split crest produces a better clinical outcome in comparison with fixtures inserted into unsplit alveolar ridges, crestal bone loss was compared in the remaining loaded implants (234--9 lost--5 not prosthetized = 220). No statistical significant difference was detected by comparing implants inserted into PES split crests with untreated alveolar ridges, although a better trend was visible for fixtures inserted into PES split crests. PES split crests provide several advantages and clinical outcomes that are not worse in terms of bone remodeling, if compared with standard procedures.

  20. Ridges on Europa

    Science.gov (United States)

    1997-01-01

    This is the highest resolution picture ever taken of the Jupiter moon, Europa. The area shown is about 5.9 by 9.9 miles (9.6 by 16 kilometers) and the smallest visible feature is about the size of a football field. In this view, the ice-rich surface has been broken into a complex pattern by cross-cutting ridges and grooves resulting from tectonic processes. Sinuous rille-like features and knobby terrain could result from surface modifications of unknown origins. Small craters of possible impact origin range in size from less than 330 feet (100 meters) to about 1300 feet (400 meters) across are visible.This image was taken by the solid state imaging television camera aboard the Galileo during its fourth orbit around Jupiter, at a distance of 2060 miles (3340 kilometers). The picture is centered at 325 degrees West, 5.83 degrees North. North is toward the top of this image, with the sun shining from the right.The Jet Propulsion Laboratory, Pasadena, CA manages the mission for NASA's Office of Space Science, Washington, DC.This image and other images and data received from Galileo are posted on the Galileo mission home page on the World Wide Web at http://galileo.jpl.nasa.gov. Background information and educational context for the images can be found at URL http://www.jpl.nasa.gov/galileo/sepo

  1. Biodegradable effect of PLGA membrane in alveolar bone regeneration on beagle dog.

    Science.gov (United States)

    Hua, Nan; Ti, Vivian Lao; Xu, Yuanzhi

    2014-11-01

    Guided bone regeneration (GBR) is a principle adopted from guided tissue regeneration (GTR). Wherein, GBR is used for the healing of peri-implant bony dehiscences, for the immediate placement of implants into extraction sockets and for the augmentation of atrophic alveolar ridges. This procedure is done by the placement of a resorbable or non-resorbable membrane that will exclude undesirable types of tissue growth between the extraction socket and the soft tissue to allow only bone cells to regenerate in the surgically treated lesion. Here, we investigated the biodegradable effect of polylactic-co-glycolic acid (PLGA) membrane in the alveolar bone on Beagle dogs. Results show that both collagen and PLGA membrane had been fully resorbed, biodegraded, at four weeks post-operative reentry into the alveolar bone. Histological results under light microscopy revealed formation of new bone trabeculae in the extraction sites on both collagen and PLGA membrane. In conclusion, PLGA membrane could be a potential biomaterials for use on GBR and GTR. Nevertheless, further studies will be necessary to elucidate the efficiency and cost effectiveness of PLGA as GBR membrane in clinical.

  2. A method for measuring post-extraction alveolar dimensional changes with volumetric computed tomography.

    Science.gov (United States)

    Bontá, Hernán; Galli, Federico G; Caride, Facundo; Carranza, Nelson

    2012-01-01

    The aim of this study is to present a predictable method for evaluating dimensional changes in the alveolar ridge through cone beam computed tomography (CT). Twenty subjects with single-rooted tooth extraction indication were selected for this preliminary report, which is part of a larger ongoing investigation. After extraction, two CT scans were performed; the first within 24 hours post-extraction (TC1) and the second 6 months (TC2) later. A radiographic guide with a radiopaque element placed along the tooth axis was developed to locate the same plane of reference in two different CT scans. For each patient, backtrack analysis was performed in order to establish the reproducibility error of a predetermined point in space between two CT scans. Briefly, an anatomical landmark was selected and its coordinates to the radiopaque marker were recorded. One week later, the coordinates were followed backwards in the same CT scan to obtain the position where the reference point should be located. A similar process was carried out between two different CT scans taken 6 months apart. The distance between the anatomical reference and the obtained point of position was calculated to establish the accuracy of the method. Additionally, a novel method for evaluating dimensional changes of the alveolus after tooth extraction is presented. The backtrack analysis determined an average within-examiner discrepancy between both measurements from the same CT scan of 0.19 mm. SD +/- 0.05. With the method presented herein, a reference point in a CT scan can be accurately backtracked and located in a second CT scan taken six months later. Taken together they open the possibility of calculating dimensional changes that occur in the alveolar ridge over time, such as post-extraction alveolar resorption, or the bone volume gained after different augmentation procedures.

  3. Chemical, physical, and histologic studies on four commercial apatites used for alveolar ridge augmentation

    DEFF Research Database (Denmark)

    Pinholt, E M; Ruyter, I E; Haanaes, H R

    1992-01-01

    characteristics obtained by chemical analysis and infrared spectrometry. None of the apatites caused osteoinduction or osteoconduction; fibrous encapsulation with multinuclear giant cells was observed around all four types. One of the apatites was fluorapatite and not hydroxylapatite, as claimed...

  4. Titanium implant insertion into dog alveolar ridges augmented by allogenic material

    DEFF Research Database (Denmark)

    Pinholt, E M; Haanaes, H R; Donath, K

    1994-01-01

    of 6 weeks allogenic, demineralized and lyophilized dentin or bone was implanted subperiosteally. Titanium implants were installed 5.5 months later in some of the regions. Light and fluorescence microscopic evaluation revealed fibrous encapsulation of the implanted allogenic material, no osteoinduction...

  5. Alveolar ridge augmentation in rats by combined hydroxylapatite and osteoinductive material

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1991-01-01

    The purpose of this study was to examine if increased bony ingrowth developed when hydroxylapatite was implanted together with an osteoinductive substrate. Dense hydroxylapatite granules (HA) (Calcitite, Calcitek, San Diego, CA, USA) were mixed with equal volumes of allogenic, demineralized...... an osteoinductive nor an osteoconductive effect. The newly formed bone induced from the implanted allogenic, demineralized, lyophilized dentin or bone was never found in close contact with the HA and did not incorporate the implant....

  6. Basaloid Squamous Cell Carcinoma Involving the Alveolar Ridge, Buccal & Lingual Vestibule - A Case Report

    Directory of Open Access Journals (Sweden)

    Supriya Koshti

    2013-01-01

    Full Text Available Background: Basaloid squamous cell carcinoma of oral mucosa is a rare and aggressive variant of squamous cell carcinoma. They can be differentiated from squamous cell carcinomas by their distinct clinical and histopathological features. Methods: 45 year old female patient presented with extra oral exophytic mass and intra-oral ulcerative lesion on right buccal mucosa and vestibule. The patient was referred for routine blood examination and radiography followed by incisional biopsy. The biopsy specimen was fixed, processed and stained with Hematoxylin and Eosin for further microscopic examination. Results: On microscopic examination basaloid cells were seen proliferating along with dysplastic squamous cells in the connective tissue stroma. Conclusion: Based on the histopathological findings a diagnosis of ′Basaloid squamous cell carcinoma′ was made. The patient was referred to department of Oral and Maxillofacial Surgery for excision of the lesion followed by radiotherapy.

  7. Clinical outcome of alveolar ridge augmentation with individualized CAD-CAM-produced titanium mesh

    OpenAIRE

    Sagheb, K; Schiegnitz, E.; Moergel, M.; Walter, C.; Al-Nawas, B.; Wagner, W.

    2017-01-01

    Background The augmentation of the jaw has been and continues to be a sophisticated therapy in implantology. Modern CAD-CAM technologies lead to revival of old and established augmentation techniques such as the use of titanium mesh (TM) for bone augmentation. The aim of this retrospective study was to evaluate the clinical outcome of an individualized CAD-CAM-produced TM based on the CT/DVT-DICOM data of the patients for the first time. Methods In 17 patients, 21 different regions were augme...

  8. Clinical and histological evaluation of alloderm GBR and BioOss in the treatment of Siebert's class I ridge deficiency

    OpenAIRE

    Sudarsan, Sabitha; Arun, K. V.; Priya, M. S.; Arun, Ramya

    2008-01-01

    Complete prosthetic rehabilitation using implants require the presence of adequate dimensions of alveolar bone. Ridge augmentation procedures include the use of guided bone regeneration (GBR) procedures where the barrier membrane provides cell occlusion and space for the regenerating tissues. Alloderm GBR has been introduced for the purpose of augmenting bone and has been postulated to have the additionally ability to integrate into soft tissues. Twenty-two patients with Siebert's class I rid...

  9. Diagnosis and treatment of hepatic alveolar echinococcosis

    Directory of Open Access Journals (Sweden)

    FANG Dan

    2017-05-01

    Full Text Available Alveolar echinococcus can be found in various organs of the body, with the liver as the most common organ. This article briefly elaborates on the diagnosis and treatment of hepatic alveolar echinococcosis. The diagnosis of this disease includes epidemic areas, serology, ultrasound, imaging examination, and pathological diagnosis, and its treatment includes radical hepatectomy, palliative hepatectomy, liver transplantation, high-intensity focused ultrasound, radiofrequency ablation, ultrasound- or CT-guided percutaneous biliary drainage, and pharmacotherapy. Regular screening, early diagnosis, and a combination of prevention and treatment should be performed for the high-risk population in epidemic areas to improve prognosis and prolong survival time.

  10. Immediate Loading of One-Piece Implants in Conjunction with a Modified Technique of Inferior Alveolar Nerve Lateralization: 10 Years Follow-Up

    Science.gov (United States)

    Eldibany, Riham; Rodriguez, Joaquin G.

    2014-01-01

    This report describes a treatment modification for a patient presented with severely resorbed bilateral edentulous posterior mandible and mobility of the anterior teeth. There was less than 8 mm of bone between the crest of the alveolar ridge and the mandibular canal as revealed by radiographic examination. A modified technique for inferior alveolar nerve lateralization (IANL) in conjunction with ridge expansion was performed using threaded bone expanders, which allowed for better primary stability and placing longer implants. A total of four postextraction implants were in the anterior region of the mandible. The mandible received a total of nine one-piece implants to allow for immediate nonfunctional loading. The definitive ceramometallic prosthesis was delivered 3 months postoperatively. The 10 years clinical and radiographic assessment showed minimal bone resorption around osseointegrated implants. One-piece implants showed great success rate and minimal bone resorption following the modified technique of IANL and immediate implantation. PMID:24624258

  11. Fabrication and anti-microbial evaluation of drug loaded polylactide space filler intended for ridge preservation following tooth extraction

    Directory of Open Access Journals (Sweden)

    Nebu George Thomas

    2011-01-01

    Full Text Available Background: The preservation or reduction of alveolar ridge resorption following tooth extraction is important in patients especially for those intended for implants at a later stage. One way to achieve this is by using membranes, graft materials, and biodegradable space fillers to prevent alveolar bone resorption and promote regeneration. A major attraction for using biodegradable and biocompatible polymers as space fillers for ridge preservation is their safety profile in comparison to xenograft materials like lyophilized bone and collagen. Materials and Methods: Biocompatible polylactide space fillers were fabricated by fusing porous polylactide particles. The sponges were loaded with drugs by placing them in the respective solutions. Pseudomonas aeruginosa was isolated from a chronic periodontitis patient and in vitro anti-microbial evaluation was done with the drug loaded sponges. Results: Chlorhexidine loaded space filler showed significant anti microbial effect against multiple drug resistant Pseudomonas aeruginosa isolated from a patient with chronic periodontitis. Conclusion: The results of this study indicate that biodegradable drug releasing polylactide space fillers has the potential to be used for ridge preservation following tooth extraction. Release of drugs in the socket may prove useful in preventing development of alveolar osteitis post extraction which can interfere with normal healing of the socket. Synthetic biodegradable polymers also exhibit a controlled degradation rate to achieve complete resorption within the intended time.

  12. Reconstruction of mandibular vertical defects for dental implants with autogenous bone block grafts using a tunnel approach: clinical study of 50 cases.

    Science.gov (United States)

    Restoy-Lozano, A; Dominguez-Mompell, J L; Infante-Cossio, P; Lara-Chao, J; Espin-Galvez, F; Lopez-Pizarro, V

    2015-11-01

    The objective of this study was to evaluate the outcomes of mandibular vertical defect reconstruction with autologous bone and the use of a sub-periosteal tunnel approach in preparation for dental implant insertion. Forty-three consecutive patients with an atrophic posterior mandible were reconstructed using this method. Two thin laminae of cortical bone, obtained by splitting blocks harvested from the retromolar area, were fixed in a box-like framework containing cancellous and particulate bone. The goal was to achieve an alveolar ridge width of ≥5.5mm and an effective bone height (EBH) of ≥10.5mm for dental implant insertion (≥3.4mm diameter, ≥9.5mm length). Fifty reconstruction procedures were performed. The mean EBH was 7.1±1.3mm pre-treatment and 12.3±1.1mm post-treatment (mean increase 5.2±1.4mm). Complete graft loss was recorded in two cases; the remaining complications were minor. After a mean consolidation period of 3.5 months, 96 dental implants were placed. No failure of osseointegration was observed at follow-up (mean 32.9 months). The average bone height reduction was 0.9mm (graft vertical resorption 17.4%). Reconstruction of posterior mandibular vertical defects using two autogenous cortical bone blocks with particulate bone between them, combined with a tunnelling technique, provided good healing with no wound dehiscence and minimum resorption of the grafted bone, favouring a substantial vertical bone gain. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  13. Alveolar proteinosis associated with aluminium dust inhalation.

    Science.gov (United States)

    Chew, R; Nigam, S; Sivakumaran, P

    2016-08-01

    Secondary alveolar proteinosis is a rare lung disease which may be triggered by a variety of inhaled particles. The diagnosis is made by detection of anti-granulocyte-macrophage colony-stimulating factor antibodies in bronchoalveolar lavage fluid, which appears milky white and contains lamellar bodies. Aluminium has been suggested as a possible cause, but there is little evidence in the literature to support this assertion. We report the case of a 46-year-old former boilermaker and boat builder who developed secondary alveolar proteinosis following sustained heavy aluminium exposure. The presence of aluminium was confirmed both by histological examination and metallurgical analysis of a mediastinal lymph node. Despite cessation of exposure to aluminium and treatment with whole-lung lavage which normally results in improvements in both symptoms and lung function, the outcome was poor and novel therapies are now being used for this patient. It may be that the natural history in aluminium-related alveolar proteinosis is different, with the metal playing a mediating role in the disease process. Our case further supports the link between aluminium and secondary alveolar proteinosis and highlights the need for measures to prevent excessive aluminium inhalation in relevant industries. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Pulmonary alveolar proteinosis: a case report

    Directory of Open Access Journals (Sweden)

    Luis Alberto Concepción-Urteaga

    2017-09-01

    Full Text Available Resumen INTRODUCCIÓN La proteinosis alveolar pulmonar es una enfermedad intersticial difusa poco frecuente, en la cual se produce obstrucción alveolar, debido al acúmulo de surfactante pulmonar. REPORTE DEL CASO Varón de 30 años de edad, presentó disnea progresiva y tos seca de un año de evolución. Antecedente personal: estibador de caña de azúcar. Presentó infecciones respiratorias recurrentes. Al examen físico se encontró cianosis, crepitantes difusos bilaterales y subcrepitantes en bases pulmonares. En la tomografía torácica con contraste se encontró un patrón de "empedrado loco". Se realizó videobroncoscopia con lavado broncoalveolar, aspirando material lechoso, espumoso y mucoso. Por citología se encontró linfocitos y material eosinofílico proteináceo acelular. El estudio anatomopatológico de la biopsia transbronquial reveló proteinosis alveolar pulmonar. El paciente reunió los criterios para tratamiento con lavado broncoalveolar total. Luego de este procedimiento, evolucionó favorablemente. CONCLUSIÓN La proteinosis alveolar pulmonar constituye una enfermedad importante a considerar, por el desafío diagnóstico y terapéutico que representa.

  15. Iatrogenic injury to the inferior alveolar nerve

    DEFF Research Database (Denmark)

    Hillerup, Søren

    2008-01-01

    The purpose of this prospective, non-randomised, descriptive study is to characterise the neurosensory deficit and associated neurogenic discomfort in 52 patients with iatrogenic injury to the inferior alveolar nerve (IAN). All patients were examined and followed up according to a protocol assess...

  16. Mid-ocean ridges, InRidge and the future

    Digital Repository Service at National Institute of Oceanography (India)

    Iyer, S.D.; Mukhopadhyay, R.; Drolia, R.K.; Ray, Dwijesh

    of Scientific and Industrial Research, New Delhi, has earmarked ridge studies as a thrust programme for the X 5 - year plan. Presently, science plans and proposal are afoot to turn this ?dream? into a reality. 1. Maury, M. F., Physical Geography...

  17. Alveolar Bone Fracture: Pathognomonic Sign for Clinical Diagnosis

    Science.gov (United States)

    Gutmacher, Zvi; Peled, Eli; Norman, Doron; Lin, Shaul

    2017-01-01

    Aim: Dental injuries, especially luxation and avulsion, are common. Dental trauma can cause alveolar bone fracture that can lead to tooth loss and malocclusion. Single tooth alveolar bone fractures are difficult to identify unless it protrudes through the overlying mucosa and can be visualized. Pain, malocclusion, and tooth mobility provide signs of suspected alveolar bone fractures. Integrity of the proximate alveolar bone should be examined for fractures where avulsion, luxation, or other tooth trauma is detected. Any suggestion of alveolar fractures should be further investigated with an appropriate radiograph. Summary: This case report shows a pathognomonic sign that detects and diagnosis single tooth alveolar bone fractures, i.e., a localized hematoma crossing the attached gingiva from the free gingival margin to the vestibular mucosa. This should serve as a warning for localized alveolar bone fracture. A visualized hematoma and gentle, careful palpation may help detect covered fractures when the overlying mucosa is not perforated. PMID:28400864

  18. Performance evaluation of an ox-drawn ridging plough in a soil-bin ...

    African Journals Online (AJOL)

    An ox-drawn ridging plough was developed using the Godwin-Spoor narrow tine soil force prediction model. The plough was evaluated in a sandy loam soil in the soil-bin at Cranfield University, Silsoe. The objectives were to compare predicted with measured draught and vertical forces, and cross-sectional area of soil ...

  19. Clinical evaluation of ridge augmentation using autogenous tooth bone graft material: case series study.

    Science.gov (United States)

    Lee, Ji-Young; Kim, Young-Kyun; Yi, Yang-Jin; Choi, Joon-Ho

    2013-08-01

    Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was 49.88±12.98 years, and the post-operative follow-up period was 35±5.31 months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was 0.12±0.19 mm. Therefore, excellent clinical results can be said to have been obtained. Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.

  20. Pine Ridge Fire summary report

    Science.gov (United States)

    Hannah Brenkert-Smith; Sarah McCaffrey; Melanie. Stidham

    2013-01-01

    In July 2012, immediately after the Pine Ridge Fire burned outside De Beque, Colorado, a team of researchers interviewed fire managers, local government officials, and residents to understand perceptions of the event itself, communication, evacuation, and pre-fire preparedness in order to identify contributors to success and areas for improvement. Although the fire had...

  1. Ridge Regression for Interactive Models.

    Science.gov (United States)

    Tate, Richard L.

    1988-01-01

    An exploratory study of the value of ridge regression for interactive models is reported. Assuming that the linear terms in a simple interactive model are centered to eliminate non-essential multicollinearity, a variety of common models, representing both ordinal and disordinal interactions, are shown to have "orientations" that are…

  2. The beach ridges of India: A review

    Digital Repository Service at National Institute of Oceanography (India)

    Kunte, P.D.; Wagle, B.G.

    An attempt has been made to assemble and synthesize research work conducted on beach ridges and associated geomorphic features around India. Information on location, morphology, origin, and age of beach ridges, has been gathered from the literature...

  3. Oak Ridge Leadership Computing Facility (OLCF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Oak Ridge Leadership Computing Facility (OLCF) was established at Oak Ridge National Laboratory in 2004 with the mission of standing up a supercomputer 100 times...

  4. European temperature responses to blocking and ridge regional patterns

    Science.gov (United States)

    Sousa, Pedro M.; Trigo, Ricardo M.; Barriopedro, David; Soares, Pedro M. M.; Santos, João A.

    2017-03-01

    Blocking occurrence and its impacts on European temperature have been studied in the last decade. However, most previous studies on blocking impacts have focused on winter only, disregarding its fingerprint in summer and differences with other synoptic patterns that also trigger temperature extremes. In this work, we provide a clear distinction between high-latitude blocking and sub-tropical ridges occurring in three sectors of the Euro-Atlantic region, describing their climatology and consequent impacts on European temperature during both winter and summer. Winter blocks (ridges) are generally associated to colder (warmer) than average conditions over large regions of Europe, in some areas with anomalies larger than 5 °C, particularly for the patterns occurring in the Atlantic and Central European sectors. During summer, there is a more regional response characterized by above average temperature for both blocking and ridge patterns, especially those occurring in continental areas, although negative temperature anomalies persist in southernmost areas during blocking. An objective analysis of the different forcing mechanisms associated to each considered weather regime has been performed, quantifying the importance of the following processes in causing the temperature anomalies: horizontal advection, vertical advection and diabatic heating. While during winter advection processes tend to be more relevant to explain temperature responses, in summer radiative heating under enhanced insolation plays a crucial role for both blocking and ridges. Finally, the changes in the distributions of seasonal temperature and in the frequencies of extreme temperature indices were also examined for specific areas of Europe. Winter blocking and ridge patterns are key drivers in the occurrence of regional cold and warm extreme temperatures, respectively. In summer, they are associated with substantial changes in the frequency of extremely warm days, but with different signatures in

  5. Seismic and Tectonic Monitoring of the Endeavour Ridge Segment—Recent and Future Expansion of Ocean Networks Canada's NEPTUNE Observatory on the Juan de Fuca Ridge

    Science.gov (United States)

    Heesemann, M.; Davis, E. E.; Scherwath, M.; Kao, H.; Coogan, L. A.; Rogers, G. C.; Wilcock, W. S. D.

    2016-12-01

    Ocean Networks Canada's (ONC) NEPTUNE observatory provides real-time access to sensors on the Endeavour Ridge Segment (Endeavour)—a focus site on the Juan de Fuca Ridge System that is complementary to one on Axial Volcano that is connected through the Ocean Observatories Initiative's (OOI) Cabled Array. While first instruments (including cameras, a short-period seismometer, and vent monitoring instruments) installed at the Main Endeavour vent field have been sending data since summer 2010, unreliable extension cables precluded continuous time-series from other nearby locations. With the successful installation of four extension cables, the summer of 2016 represents an important milestone in the instrumentation of the Endeavour Ridge Segment. We will present an overview of the data that are available in near real-time from Endeavour and new instrumentation that is scheduled for installation in 2017, and highlight first results derived from the new seismo-tectonic network now in operation. This network consists of three short-period seismometers (Mothra Field, Main Endeavour Field, Regional Circulation North), one broadband seismometer (western Ridge Flank), and four bottom pressure recorders (Mothra Field, Regional Circulation South, Main Endeavour Field, western Ridge Flank). The pressure recorders will provide both seismic and oceanographic data, and allow to measure differential vertical motion among the sites. We will also highlight a new technique to determine long period seafloor deformation from broadband seismometer mass-position measurements, using data from the Ridge Flank instrument as an example.

  6. Silver Nanoparticles in Alveolar Bone Surgery Devices

    Directory of Open Access Journals (Sweden)

    Stefano Sivolella

    2012-01-01

    Full Text Available Silver (Ag ions have well-known antimicrobial properties and have been applied as nanostrategies in many medical and surgical fields, including dentistry. The use of silver nanoparticles (Ag NPs may be an option for reducing bacterial adhesion to dental implant surfaces and preventing biofilm formation, containing the risk of peri-implant infections. Modifying the structure or surface of bone grafts and membranes with Ag NPs may also prevent the risk of contamination and infection that are common when alveolar bone augmentation techniques are used. On the other hand, Ag NPs have revealed some toxic effects on cells in vitro and in vivo in animal studies. In this setting, the aim of the present paper is to summarize the principle behind Ag NP-based devices and their clinical applications in alveolar bone and dental implant surgery.

  7. Treatment of Adult Primary Alveolar Proteinosis.

    Science.gov (United States)

    Rodríguez Portal, José Antonio

    2015-07-01

    Pulmonary alveolar proteinosis (PAP) is a rare disease characterized by the accumulation of surfactant-like lipoproteinaceous material in the distal air spaces and terminal bronchi, which may lead to impaired gas exchange. This accumulation of surfactant is due to decreased clearance by the alveolar macrophages. Its primary, most common form, is currently considered an autoimmune disease. Better knowledge of the causes of PAP have led to the emergence of alternatives to whole lung lavage, although this is still considered the treatment of choice. Most studies are case series, often with limited patient numbers, so the level of evidence is low. Since the severity of presentation and clinical course are variable, not all patients will require treatment. Due to the low level of evidence, some objective criteria based on expert opinion have been arbitrarily proposed in an attempt to define in which patients it is best to initiate treatment. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.

  8. Rare Lung Diseases II: Pulmonary Alveolar Proteinosis

    Directory of Open Access Journals (Sweden)

    Stephen C Juvet

    2008-01-01

    Full Text Available The present article is the second in a series on rare lung diseases. It focuses on pulmonary alveolar proteinosis (PAP, a disorder in which lipoproteinaceous material accumulates in the alveolar space. PAP was first described in 1958, and for many years the nature of the material accumulating in the lungs was unknown. Major insights into PAP have been made in the past decade, and these have led to the notion that PAP is an autoimmume disorder in which autoantibodies interfere with signalling through the granulocyte-macrophage colony-stimulating factor receptor, leading to macrophage and neutrophil dysfunction. This has spurred new therapeutic approaches to this disorder. The discussion of PAP will begin with a case report, then will highlight the classification of PAP and review recent insights into the pathogenesis of PAP. The approach to therapy and the prognosis of PAP will also be discussed.

  9. Inferior alveolar nerve repositioning and orthognathic surgery.

    Science.gov (United States)

    Rahpeyma, Amin; Khajehahmadi, Saeedeh

    2014-09-01

    Inferior alveolar nerve (IAN) repositioning is a well-known technique in implant dentistry. This invaluable technique can be combined with orthognathic techniques to enhance the effect of orthognathic surgery in some selected cases. In a retrospective study, data were obtained from the archived files of Department of Oral and Maxillofacial Surgery, Mashhad University of Medical Sciences, Iran, from 2007 to 2012. Patients undergoing mandibular orthognathic surgery alone or in combination with maxillary surgery were searched. Cases with IAN repositioning were selected. In this study, in 4% of orthognathic surgical procedures involving the mandibular bone, IAN repositioning was indicated. Genioplasty, body ostectomy, total mandibular subapical alveolar osteotomy, and inferior border osteotomy for correction of asymmetric mandibular excess in hemimandibular hyperplasia were in this list. In carefully selected orthognathic patients, IAN repositioning can enhance the effect of orthognathic surgery and should be considered in the treatment plan strategies as an option.

  10. Tidal energy redistribution among vertical modes in a fluid with a mid-depth pycnocline

    NARCIS (Netherlands)

    Bordois, L.; Auclair, F.; Paci, A.; Dossmann, Y.; Gerkema, T.; Nguyen, C.

    2016-01-01

    We modeled internal tide generation above a high sinusoidal ridge in a fluid with a mid-depth pycnocline and developed an original method to quantify internal tide vertical mode amplitude in two-dimensional-vertical simulations. Since lowest modes can propagate over considerable distances, while

  11. Silica binding and toxicity in alveolar macrophages

    OpenAIRE

    Hamilton, Raymond F.; Thakur, Sheetal A.; Holian, Andrij

    2007-01-01

    Inhalation of the crystalline form of silica is associated with a variety of pathologies from acute lung inflammation to silicosis, in addition to autoimmune disorders and cancer. Basic science researchers looking at the mechanisms involved with the earliest initiators of disease are focused on how the alveolar macrophage (AM) interacts with the inhaled silica particle and the consequences of silica-induced toxicity on the cellular level. Based on experimental results, several rationales have...

  12. Antibiotic uptake by alveolar macrophages of smokers.

    OpenAIRE

    Hand, W L; Boozer, R M; King-Thompson, N L

    1985-01-01

    Cigarette smoking, particularly when associated with chronic pulmonary disease, increases the risk of respiratory tract infection. Thus, we elevated the uptake of antibiotics by alveolar macrophages (AM) obtained by bronchoalveolar lavage from persons who smoke and have associated pulmonary abnormalities, circumstances which adversely affect certain macrophage functions. The entry of radiolabeled drugs into AM was determined by a velocity-gradient centrifugation technique, and uptake was expr...

  13. The Global Burden of Alveolar Echinococcosis

    OpenAIRE

    Torgerson, Paul R; Krista Keller; Mellissa Magnotta; Natalie Ragland

    2010-01-01

    BACKGROUND: Human alveolar echinococcosis (AE) is known to be common in certain rural communities in China whilst it is generally rare and sporadic elsewhere. The objective of this study was to provide a first estimate of the global incidence of this disease by country. The second objective was to estimate the global disease burden using age and gender stratified incidences and estimated life expectancy with the disease from previous results of survival analysis. Disability weights were sugge...

  14. InRidge program: Preliminary results from the first cruise

    Digital Repository Service at National Institute of Oceanography (India)

    Mukhopadhyay, R.; Murthy, K.S.R.; Iyer, S.D.; Rao, M.M.M.; Banerjee, R.; Subrahmanyam, A.S.; Shirodkar, P.V.; Ghose, I.

    The first cruise under India's own Ridge research initiative, InRidge collected new data on bathymetry, free-air gravity and magnetic anomalies across the ridge axis between the Vema and Zhivago transform faults in the Central Indian Ridge...

  15. In situ methods for assessing alveolar mechanics.

    Science.gov (United States)

    Wu, You; Perlman, Carrie E

    2012-02-01

    Lung mechanics are an important determinant of physiological and pathophysiological lung function. Recent light microscopy studies of the intact lung have furthered the understanding of lung mechanics but used methodologies that may have introduced artifacts. To address this concern, we employed a short working distance water immersion objective to capture confocal images of a fluorescently labeled alveolar field on the costal surface of the isolated, perfused rat lung. Surface tension held a saline drop between the objective tip and the lung surface, such that the lung surface was unconstrained. For comparison, we also imaged with O-ring and coverslip; with O-ring, coverslip, and vacuum pressure; and without perfusion. Under each condition, we ventilated the lung and imaged the same region at the endpoints of ventilation. We found use of a coverslip caused a minimal enlargement of the alveolar field; additional use of vacuum pressure caused no further dimensional change; and absence of perfusion did not affect alveolar field dimension. Inflation-induced expansion was unaltered by methodology. In response to inflation, percent expansion was the same as recorded by all four alternative methods.

  16. [Clinical research on repairing alveolar cleft with osteoinduction active material].

    Science.gov (United States)

    She, Xiao-ming; Zhang, Qian; Tian, Kun; Yang, Li; Xiong, Gui-fa

    2010-08-01

    To study the feasibility and authenticity of repairing alveolar defects in alveolar cleft patients with osteoinduction active material (OAM) in clinic. Twenty-seven cases of alveolar defect chosen from clinic were divided into two groups (test group and control group). For test group (12 cases), OAM was transplanted to repair the alveolar cleft. For control group (15 cases), autogenous ilium cancellous bone were transplanted into the defect region to repair alveolar cleft. At 6 months after operation, CT and three-dimensional reconstruction were used to observe alveolar appearance, and the effect and clinical success rate of recover alveolar cleft by using different repair material were compared. In the 27 cases, all the maxillary continuity was restored except two of test group and two of control group. There was no significant difference between test group and control group regarding the clinical success rate of the alveolar cleft repair (P = 1.000). OAM was used to repair the alveolar cleft that can result in new bone formations and the burgeon of canines from the bone grafted areas. There is no significant difference between OAM and autogenous ilium cancellous bone regarding the effect of the alveolar cleft repair.

  17. High power 1060-nm super large vertical cavity semiconductor lasers

    Science.gov (United States)

    Tan, Shaoyang; Zhai, Teng; Wang, Wei; Zhang, Ruikang; Lu, Dan; Ji, Chen

    2014-11-01

    High power single-mode ridge waveguide 1060-nm semiconductor lasers are reported. The lasers consist of compressively strained double InGaAs/GaAs quantum wells and a GaAs/AlGaAs separate confinement vertical structure. A super large vertical optical cavity is employed to have a low internal loss, large optical spot size and low vertical optical divergence angle. The material composition and thickness of waveguide layers and claddings layer are optimized systematically. The active layer is detuned from center of the waveguide and thickness of cladding layers is optimized to guaranty single mode lasing of the large optical cavity. The large vertical cavity laser structure with thickness of 4 μm allows the lasers have a low internal loss of less than 0.6 /cm, a large optical spot size about 1μm and a vertical divergence angle about 20 degree. For lateral optical confinement, a double trench ridge waveguide is employed to maintain single-lateral-mode operation. Based on the optimization, 1.5 W continue wave optical power is achieved for broad area lasers with 1mm longitude cavity length. Narrow stripe ridge waveguide lasers of 1mm cavity length with single mode current and optical power of 700 mA and 340 mW is obtained. Suggestions for further improvements in terms of single mode power and applications of the high power semiconductors are discussed.

  18. Stable vertical distraction osteogenesis of highly atrophic mandibles after ablative tumour surgery of the oral cavity--a salvage pathway for mandibular reconstruction prior to oral rehabilitation with dental implants.

    Science.gov (United States)

    Adolphs, Nicolai; Sproll, Christoph; Raguse, Jan-Dirk; Nelson, Katja; Heberer, Susanne; Scheifele, Christian; Klein, Martin

    2009-09-01

    Mandibular reconstruction is still a challenge for surgeons. Distraction osteogenesis (DO) might contribute in certain instances to solve this problem. A principal advantage of DO is the expansion of the surrounding soft tissues that accompanies the bony regeneration. In addition there is no donor site morbidity when compared with reconstruction by autologous bone grafting. However its application may be limited by the thinness of the mandible and the attendant fracture risk. This article describes a technique that combines stable internal fixation with vertical distraction of the alveolar ridge in six patients with critical mandibular thickness after ablative surgery for cancer of the oral cavity. Prior to implant insertion for further prosthodontic restoration stable vertical mandibular distraction produced an additional 11-20mm. Improvement of the surrounding soft tissues, especially intraorally was achieved and dental implants were inserted after bony consolidation. This method can be a useful salvage technique for the augmentation of the atrophic mandible in patients who are not able or willing to undergo the risks and disadvantages of established methods such as free autologous bone transfer or microsurgical techniques.

  19. Prediction of further residual ridge resorption by a simple biochemical and radiographic evaluation: A pilot study

    Directory of Open Access Journals (Sweden)

    Mohit Kheur

    2012-01-01

    Full Text Available Background and Objective: The success of a removable denture is measured by its retention and stability which rely on the structural integrity exhibited by the underlying residual ridge. However the residual ridge undergoes a progressive resorption, causing a reduction in its size. The multifactorial etiology of the reduction of residual ridges makes it significant for the operator to try and understand as well as to predict the rate of resorption prior to fabrication of dentures. The objective of the study was to evaluate a simple, fast and cost effective diagnostic tool to study and anticipate ridge resorption. Materials and Methods: 17 completely edentulous male patients were selected for the study. Standardized orthopantomographs were made for all the subjects and measurements were made on them. The resorption index was calculated for each patient. A random urine sample was taken from each patient to investigate the 24 hours urinary calcium-creatnine ratio. Results: A direct relation was seen between patients with lower resorption index and lower 24 hours urinary calcium-creatnine ratio. Clinically these cases had undergone a marked amount of reduction in the residual alveolar ridges with respect to the width and height. Also, a direct relation was seen when the patients presented with higher 24 hours urinary calcium-creatnine ratio and greater resorption index. These patients presented with good height and width of the residual ridges. Conclusion: Our study shows a direct relation between the resorption of the bone and the calcium-creatinine levels of the edentulous subjects. The calcium-creatnine ratio in conjunction with the resorption index can be used as a simple and cost effective diagnostic tool.

  20. Sex Determination from Fingerprint Ridge Density

    Directory of Open Access Journals (Sweden)

    Dr. Sudesh Gungadin

    2007-07-01

    Full Text Available This study was conducted with an aim to establish a relationship between sex and fingerprint ridge density. The fingerprints were taken from 500 subjects (250 males and 250 females in the age group of 18-60 years. After taking fingerprints, the ridges were counted in the upper portion of the radial border of each print for all ten fingers and mean value was calculated. The results have shown that a finger print ridge of 14 ridges/25 mm2 is more likely of female origin. It has been successful to support the hypothesis that women tend to have a statistically significant greater ridge density than men.

  1. PERFORATION OF INFERIOR ALVEOLAR NERVE BY MAXILLARY ARTERY. Perforation of inferior alveolar nerve by maxillary artery

    Directory of Open Access Journals (Sweden)

    Prakash B Billakanti

    2016-03-01

    Full Text Available La fosa infratemporal es un área anatómica clínicamente importante para la administración de agentes anestésicos locales en odontología y cirugía maxilofacial. Fueron estudiadas variaciones en la anatomía del nervio alveolar inferior y la arteria maxilar en la disección infratemporal. Durante la disección rutinaria de la cabeza en el cadáver de un varón adulto, fue observada una variación excepcional en el origen del nervio alveolar inferior y su relación con las estructuras circundantes. El nervio alveolar inferior se originaba en el nervio mandibular por dos raíces y la primera parte de la arteria maxilar estaba incorporada entre ambas. El origen embriológico de esta variación y sus implicaciones clínicas es debatido. Dado que la arteria maxilar transcurría entre las dos raíces del nervio alveolar inferior, y el nervio estaba fijado entre el foramen oval y el foramen mandibular, el atrapamiento vásculo-nervioso pudo causar entume-cimiento o dolor de cabeza e interferir con la inyección de anestésicos locales en la fosa infratemporal.  Variaciones anatómicas en esta región deben ser tenidas en cuenta, especialmente en casos de tratamiento fallido de neuralgia del trigémino. Infratemporal fossa is clinically important anatomical area for the delivery of local anesthetic agents in dentistry and maxillofacial surgery. Variations in the anatomy of the inferior alveolar nerve and maxillary artery were studied in infratemporal dissection. During routine dissection of the head in an adult male cadaver an unusual variation in the origin of the inferior alveolar nerve and its relationship with the surrounding structures was observed. The inferior alveolar nerve originated from the mandibular nerve by two roots and the first part of the maxillary artery was incorporated between them. An embryologic origin of this variation and its clinical implications is discussed. Because the maxillary artery runs between the two roots of

  2. Melt extraction pathways at segmented oceanic ridges: Application to the East Pacific Rise at the Siqueiros transform

    Science.gov (United States)

    Hebert, Laura B.; Montési, Laurent G. J.

    2011-06-01

    Throughout the global mid-ocean ridge system, transform faults offset spreading centers. Conductive cooling may be more efficient beneath transform faults, producing a thickened lithosphere that directs melt away from the transform. However, recent observations of thickened crust along transform faults at fast ridges suggest melt redistribution toward transforms, intra-crustal melt production, or efficient extraction of melt. We apply a 3-D model of melt migration and extraction along an oceanic transform domain bounded by ridge segments. Melt is assumed to travel vertically before collecting and migrating beneath a low-permeability boundary inclined towards the ridge axis. A melt extraction zone, which may be geologically interpreted as the presence of faults and/or dikes leading to rapid lateral and vertical melt migration toward plate boundaries, affects the pattern of crustal accretion at segmented ridges. First, we examine a generic ridge-transform-ridge geometry and then a model that represents the Siqueiros transform on the East Pacific Rise. On the basis of crustal thickness variations within the intra-transform spreading centers along the fast-slipping Siqueiros fault, we constrain the presence of a melt extraction zone within 10 km of the transform zone.

  3. Status of Blue Ridge Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This is one in a series of reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Blue Ridge Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports and data available, as well as interview with water resource professionals in various federal, state, and local agencies. Blue Ridge Reservoir is a single-purpose hydropower generating project. When consistent with this primary objective, the reservoir is also operated to benefit secondary objectives including water quality, recreation, fish and aquatic habitat, development of shoreline, aesthetic quality, and other public and private uses that support overall regional economic growth and development. 8 refs., 1 fig.

  4. Oak Ridge National Laboratory Review

    Energy Technology Data Exchange (ETDEWEB)

    Krause, C.; Pearce, J.; Zucker, A. (eds.)

    1992-01-01

    This report presents brief descriptions of the following programs at Oak Ridge National Laboratory: The effects of pollution and climate change on forests; automation to improve the safety and efficiency of rearming battle tanks; new technologies for DNA sequencing; ORNL probes the human genome; ORNL as a supercomputer research center; paving the way to superconcrete made with polystyrene; a new look at supercritical water used in waste treatment; and small mammals as environmental monitors.

  5. Bose enhancement and the ridge

    Energy Technology Data Exchange (ETDEWEB)

    Altinoluk, Tolga [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); Armesto, Néstor, E-mail: nestor.armesto@usc.es [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); Beuf, Guillaume [Department of Physics, Ben-Gurion University of the Negev, Beer Sheva 84105 (Israel); Kovner, Alex [Physics Department, University of Connecticut, 2152 Hillside Road, Storrs, CT 06269-3046 (United States); Lublinsky, Michael [Department of Physics, Ben-Gurion University of the Negev, Beer Sheva 84105 (Israel)

    2015-12-17

    We point out that Bose enhancement in a hadronic wave function generically leads to correlations between produced particles. We show explicitly, by calculating the projectile density matrix in the Color Glass Condensate approach to high-energy hadronic collisions, that the Bose enhancement of gluons in the projectile leads to azimuthal collimation of long range rapidity correlations of the produced particles, the so-called ridge correlations.

  6. Bose enhancement and the ridge

    Directory of Open Access Journals (Sweden)

    Tolga Altinoluk

    2015-12-01

    Full Text Available We point out that Bose enhancement in a hadronic wave function generically leads to correlations between produced particles. We show explicitly, by calculating the projectile density matrix in the Color Glass Condensate approach to high-energy hadronic collisions, that the Bose enhancement of gluons in the projectile leads to azimuthal collimation of long range rapidity correlations of the produced particles, the so-called ridge correlations.

  7. Prevalence and location of the posterior superior alveolar artery using cone-beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Tehranchi, Maryam; Taleghani, Ferial; Shahab, Shahriar [Faculty of Dentistry, Shahed University, Tehran (Iran, Islamic Republic of); Nouri, Arash [Nouri' s Dental Clinic, Tehran (Iran, Islamic Republic of)

    2017-03-15

    Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was 1.29±0.39 mm, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were 22.59±4.89 mm, 26.51±3.52 mm, and 16.7±3.96 mm, respectively. The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

  8. Intranasal Fentanyl Intoxication Leading to Diffuse Alveolar Hemorrhage.

    Science.gov (United States)

    Ruzycki, Shannon; Yarema, Mark; Dunham, Michael; Sadrzadeh, Hossein; Tremblay, Alain

    2016-06-01

    Increasing rates of opioid abuse, particularly fentanyl, may lead to more presentations of unusual effects of opioid toxicity. Diffuse alveolar hemorrhage is a rare complication of fentanyl overdose. A 45-year-old male presented in hypoxic respiratory failure secondary to diffuse alveolar hemorrhage requiring intubation. Comprehensive drug screening detected fentanyl without exposure to cocaine. Further history upon the patient's recovery revealed exposure to snorted fentanyl powder immediately prior to presentation. Diffuse alveolar hemorrhage is a potential, though rare, presentation of opioid intoxication. Recognition of less common complications of opioid abuse such as diffuse alveolar hemorrhage is important in proper management of overdoses.

  9. Changing characteristics of arctic pressure ridges

    Science.gov (United States)

    Wadhams, Peter; Toberg, Nick

    2012-04-01

    The advent of multibeam sonar permits us to obtain full three-dimensional maps of the underside of sea ice. In particular this enables us to distinguish the morphological characteristics of first-year (FY) and multi-year (MY) pressure ridges in a statistically valid way, whereas in the past only a small number of ridges could be mapped laboriously by drilling. In this study pressure ridge distributions from two parts of the Arctic Ocean are compared, in both the cases using mainly data collected by the submarine “Tireless” in March 2007 during two specific grid surveys, in the Beaufort Sea at about 75° N, 140° W (N of Prudhoe Bay), and north of Ellesmere Island at about 83° 20‧ N, 64° W. In the Beaufort Sea the ice was mainly FY, and later melted or broke up as this area became ice-free during the subsequent summer. N of Ellesmere Island the ice was mainly MY. Ridge depth and spacing distributions were derived for each region using the boat's upward looking sonar, combined with distributions of shapes of the ridges encountered, using the Kongsberg EM3002 multibeam sonar. The differing shapes of FY and MY ridges are consistent with two later high-resolution multibeam studies of specific ridges by AUV. FY ridges are found to fit the normal triangular shape template in cross-section (with a range of slope angles averaging 27°) with a relatively constant along-crest depth, and often a structure of small ice blocks can be distinguished. MY ridges, however, are often split into a number of independent solid, smooth blocks of large size, giving an irregular ridge profile which may be seemingly without linearity. Our hypothesis for this difference is that during its long lifetime an MY ridge is subjected to several episodes of crack opening; new cracks in the Arctic pack often run in straight lines across the ridges and undeformed ice alike. Such a crack will open somewhat before refreezing, interpolating a stretch of thin ice into the structure, and breaking up

  10. Acquired vertical accommodative vergence.

    Science.gov (United States)

    Klein-Scharff, Ulrike; Kommerell, Guntram; Lagrèze, Wolf A

    2008-03-08

    Vertical accommodative vergence is an unusual synkinesis in which vertical vergence is modulated together with accommodation. It results from a supranuclear miswiring of the network normally conveying accommodative convergence. So far, it is unknown whether this condition is congenital or acquired. We identified an otherwise healthy girl who gradually developed vertical accommodative vergence between five to 13 years of age. Change of accommodation by 3 diopters induced a vertical vergence of 10 degrees. This observation proves that the miswiring responsible for vertical accommodative vergence must not necessarily be congenital, but can be acquired. The cause and the mechanism leading to vertical accommodative vergence are yet unknown.

  11. Alveolar soft part sarcoma: A rare diagnosis

    Directory of Open Access Journals (Sweden)

    Priyanka Sarkar

    2013-01-01

    Full Text Available Alveolar soft-part sarcoma (ASPS is an extremely rare disease arising from connective tissues with a propensity for recurrence and metastasis. Clinically, it can be confused with hemangioma or arterio-venous malformations. Thus, a high index of suspicion and histopathological examination are required to make a definitive diagnosis. We report a case of recurrent ASPS in a young female with multiple sites involvement without any features of metastasis who has been treated with excision of the symptomatic lesions followed by chemotherapy.

  12. Nostril Base Augmentation Effect of Alveolar Bone Graft

    Directory of Open Access Journals (Sweden)

    Woojin Lee

    2013-09-01

    Full Text Available Background The aims of alveolar bone grafting are closure of the fistula, stabilization ofthe maxillary arch, support for the roots of the teeth adjacent to the cleft on each side.We observed nostril base augmentation in patients with alveolar clefts after alveolar bonegrafting. The purpose of this study was to evaluate the nostril base augmentation effect ofsecondary alveolar bone grafting in patients with unilateral alveolar cleft.Methods Records of 15 children with alveolar clefts who underwent secondary alveolar bonegrafting with autogenous iliac cancellous bone between March of 2011 and May of 2012 werereviewed. Preoperative and postoperative worm’s-eye view photographs and reconstructedthree-dimensional computed tomography (CT scans were used for photogrammetry. Thedepression of the nostril base and thickness of the philtrum on the cleft side were measuredin comparison to the normal side. The depression of the cleft side pyriform aperture wasmeasured in comparison to the normal side on reconstructed three-dimensional CT.Results Significant changes were seen in the nostril base (P=0.005, the philtrum length(P=0.013, and the angle (P=0.006. The CT measurements showed significant changes in thepyriform aperture (P<0.001 and the angle (P<0.001.Conclusions An alveolar bone graft not only fills the gap in the alveolar process but alsoaugments the nostril base after surgery. In this study, only an alveolar bone graft was performedto prevent bias from other procedures. Nostril base augmentation can be achieved byperforming alveolar bone grafts in children, in whom invasive methods are not advised.

  13. Impact of selective alveolar decortication on bisphosphonate burdened alveolar bone during orthodontic tooth movement.

    Science.gov (United States)

    Kaipatur, Neelambar; Major, Paul; Stevenson, Thomas; Pehowich, Dan; Adeeb, Samer; Doschak, Michael

    2015-11-01

    To investigate the effect of Selective Alveolar Decortication (SADc) facilitated orthodontic tooth movement (OTM) on bisphosphonate burdened alveolar bone in a rodent model. OTM was accomplished by protraction of the maxillary right first molars. Four groups were included of which two groups were pre-treated for three months with alendronate sodium (BP+TM+SADc and BP+TM group) and two groups were given saline (TM+SADc and TM group). Selective alveolar decortication surgery was performed on day 1 of appliance insertion. OTM measurements were obtained at 0, 4, and 8 weeks using in-vivo μCT. Tissues were analysed by histology and EPMA. Tooth movement of 0.39 mm and 0.75 mm in the BP+TM+SADc group at 4 and 8 weeks respectively was achieved with 113% increase in tooth movement compared to BP+TM group at 4 weeks. In comparison, SADc+TM group showed 0.63 mm and 2.1 mm of tooth movement at 4 weeks and 8 weeks respectively with only 6% increase at 4 weeks and 2% increase at 8 weeks compared to TM group. Severe interproximal and buccal bone loss around the first permanent molar in the BP+TM+SADc group was seen with μCT imaging and histology. Animals in BP+TM+SADc group histologically showed signs of osteonecrotic bone with irregular borders, loss of osteocytes and absence of osteocytic lacunae. This study demonstrated selective alveolar decortication accelerates tooth movement in a bisphosphonate burdened alveolar bone in the short term but the potential of such an invasive injury can have adverse effects. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. C-tank transfers: Transuranic sludge removal from the C-1, C-2, and W-23 waste storage tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Dahl, T.L.; Lay, A.C.; Taylor, S.A.; Moore, J.W.

    1999-05-01

    Two fluidic pulse jet mixing systems were used to successfully mobilize remote-handled transuranic sludge for retrieval from three 50,000-gal horizontal waste storage tanks at Oak Ridge National Laboratory (ORNL). The results of this operation indicate that the pulse jet system should be considered for mixing and bulk retrieval of sludges in other vertical and horizontal waste tanks at ORNL and at other U.S. Department of Energy sites.

  15. Silica binding and toxicity in alveolar macrophages.

    Science.gov (United States)

    Hamilton, Raymond F; Thakur, Sheetal A; Holian, Andrij

    2008-04-01

    Inhalation of the crystalline form of silica is associated with a variety of pathologies, from acute lung inflammation to silicosis, in addition to autoimmune disorders and cancer. Basic science investigators looking at the mechanisms involved with the earliest initiators of disease are focused on how the alveolar macrophage interacts with the inhaled silica particle and the consequences of silica-induced toxicity on the cellular level. Based on experimental results, several rationales have been developed for exactly how crystalline silica particles are toxic to the macrophage cell that is functionally responsible for clearance of the foreign particle. For example, silica is capable of producing reactive oxygen species (ROS) either directly (on the particle surface) or indirectly (produced by the cell as a response to silica), triggering cell-signaling pathways initiating cytokine release and apoptosis. With murine macrophages, reactive nitrogen species are produced in the initial respiratory burst in addition to ROS. An alternative explanation for silica toxicity includes lysosomal permeability, by which silica disrupts the normal internalization process leading to cytokine release and cell death. Still other research has focused on the cell surface receptors (collectively known as scavenger receptors) involved in silica binding and internalization. The silica-induced cytokine release and apoptosis are described as the function of receptor-mediated signaling rather than free radical damage. Current research ideas on silica toxicity and binding in the alveolar macrophage are reviewed and discussed.

  16. An Evaluation of Ridge Regression.

    Science.gov (United States)

    1981-12-01

    of the parameter estimates, is a decreasing function of k. The idea of ridge regression, as suggested by Hoerl and Kennard (Ref 12:58-63), is to pick...CROSS? 0 CR0553 f.812 CR0554 0 CR0555 4.39? CROSS6 0 ALSO 4.922 KSO 0 NVARSO 4. A5059 .622 CONTFNTS OF CASE NUlIPER 209 SEQHUI 209. SUOILE PEGANAL CASWGT...KSQ .000 NVARSO 9. RSOSO .846 CONTENTS OF CASE NUMBER 55 SEONUN 55. SUfTFILE PEGANAL CASWGI 2.0000 459 .970 RI 76600 K .025 NVA? 3. MSE .177 NS[IS

  17. Tongue-Palate Contact of Perceptually Acceptable Alveolar Stops

    Science.gov (United States)

    Lee, Alice; Gibbon, Fiona E.; O'Donovan, Cliona

    2013-01-01

    Increased tongue-palate contact for perceptually acceptable alveolar stops has been observed in children with speech sound disorders (SSD). This is a retrospective study that further investigated this issue by using quantitative measures to compare the target alveolar stops /t/, /d/ and /n/ produced in words by nine children with SSD (20 tokens of…

  18. Diffuse alveolar hemorrhage in a young woman with systemic lupus ...

    African Journals Online (AJOL)

    Diffuse Alveolar Hemorrhage (DAH) is rarely reported complication of Systemic Lupus Erythematosus (SLE). A young woman diagnosed SLE, with a previously normal plain chest radiograph, developed acute onset cough, dyspnoea and hemoptysis. The repeat urgent chest radiograph revealed alveolar opacities. The triad ...

  19. Pulmonary alveolar proteinosis — a case report and review

    African Journals Online (AJOL)

    Enrique

    with granular, eosinophilic, proteina- ceous material (Fig. 2) with preserva- tion of the alveolar architecture. The patient was treated by whole-lung lavage, followed by a ... G (IgG) antibodies against GM-CSF.8. Surfactant is normally cleared by uptake into alveolar macrophages and. GM-CSF is critical for this process, as.

  20. Classification of alveolar bone destruction patterns on maxillary ...

    African Journals Online (AJOL)

    Objective: The defective diagnosis of alveolar structures is one of most serious handicaps when assessing available periodontal treatment options for the prevention of tooth loss. The aim of this research was to classify alveolar bone defects in the maxillary molar region which is a challenging area for dental implant ...

  1. Pendeteksian Outlier dengan Metode Regresi Ridge

    Directory of Open Access Journals (Sweden)

    Sri Harini

    2009-11-01

    Full Text Available Dalam analisis regresi linier berganda adanya satu atau lebih pengamatan pencilan (outlier akan menimbulkan dilema bagi para peneliti. Keputusan untuk menghilangkan pencilan tersebut harus dilandasi alasan yang kuat, karena kadang-kadang pencilan dapat memberikan informasi penting yang diperlukan. Masalah outlier ini dapat diatasi dengan berbagai metode, diantaranya metode regresi ridge (ridge regression. Untuk mengetahui kekekaran regresi ridge perlu melihat nilai-nilai R2, PRESS, serta leverage (hii, untuk metode regresi ridge dengan berbagai nilai tetapan bias k yang dipilih.

  2. Contemporary Approaches in the Repair of Alveolar Clefts

    Directory of Open Access Journals (Sweden)

    Ufuk Tatli

    2014-08-01

    Full Text Available Cleft lip and palate is one of the most common craniofacial anomalies. The repair of the alveolar clefts is an important part of the treatment for patients with cleft lip and palate. The treatment concepts of alveolar bone grafting are still controversial. The corresponding controversial issues are; timing of alveolar bone grafting, graft materials, and timing of the orthodontic expansion. In the present article, aforementioned controversial issues and contemporary treatment modalities of the maxillary alveolar clefts were reviewed in the light of current literature. In conclusion, the most suitable time for alveolar bone grafting is mixed dentition period. Grafting procedure may be performed in the early or late phases of this period depending on some clinical features. Adjunct orthodontic expansion procedures should be performed before and/or after grafting depending on the patient's current features. [Archives Medical Review Journal 2014; 23(4.000: 563-574

  3. Rituximab therapy in pulmonary alveolar proteinosis improves alveolar macrophage lipid homeostasis

    Directory of Open Access Journals (Sweden)

    Malur Anagha

    2012-06-01

    Full Text Available Abstract Rationale Pulmonary Alveolar Proteinosis (PAP patients exhibit an acquired deficiency of biologically active granulocyte-macrophage colony stimulating factor (GM-CSF attributable to GM-CSF specific autoantibodies. PAP alveolar macrophages are foamy, lipid-filled cells with impaired surfactant clearance and markedly reduced expression of the transcription factor peroxisome proliferator-activated receptor gamma (PPARγ and the PPARγ-regulated ATP binding cassette (ABC lipid transporter, ABCG1. An open label proof of concept Phase II clinical trial was conducted in PAP patients using rituximab, a chimeric murine-human monoclonal antibody directed against B lymphocyte specific antigen CD20. Rituximab treatment decreased anti-GM-CSF antibody levels in bronchoalveolar lavage (BAL fluid, and 7/9 patients completing the trial demonstrated clinical improvement as measured by arterial blood oxygenation. Objectives This study sought to determine whether rituximab therapy would restore lipid metabolism in PAP alveolar macrophages. Methods BAL samples were collected from patients pre- and 6-months post-rituximab infusion for evaluation of mRNA and lipid changes. Results Mean PPARγ and ABCG1 mRNA expression increased 2.8 and 5.3-fold respectively (p ≤ 0.05 after treatment. Lysosomal phospholipase A2 (LPLA2 (a key enzyme in surfactant degradation mRNA expression was severely deficient in PAP patients pre-treatment but increased 2.8-fold post-treatment. In supplemental animal studies, LPLA2 deficiency was verified in GM-CSF KO mice but was not present in macrophage-specific PPARγ KO mice compared to wild-type controls. Oil Red O intensity of PAP alveolar macrophages decreased after treatment, indicating reduced intracellular lipid while extracellular free cholesterol increased in BAL fluid. Furthermore, total protein and Surfactant protein A were significantly decreased in the BAL fluid post therapy. Conclusions Reduction in GM

  4. Vertical axis wind turbines

    Science.gov (United States)

    Krivcov, Vladimir [Miass, RU; Krivospitski, Vladimir [Miass, RU; Maksimov, Vasili [Miass, RU; Halstead, Richard [Rohnert Park, CA; Grahov, Jurij [Miass, RU

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  5. Large fault fabric of the Ninetyeast Ridge implies near-spreading ridge formation

    Digital Repository Service at National Institute of Oceanography (India)

    Sager, W.W.; Paul, C.F.; Krishna, K.S.; Pringle, M.S.; Eisin, A.E.; Frey, F.A.; Rao, D.G.; Levchenko, O.V.

    Ninetyeast Ridge (NER) is a linear volcanic ridge in the Indian Ocean thought to have formed by hotspot volcanism on the northward?drifting Indian plate. Geological data from the ridge are sparse, so its tectonic evolution is poorly known. We...

  6. Lateral Ridge Splitting (Expansion) With Immediate Placement of Endosseous Dental Implant Using Piezoelectric Device: A New Treatment Protocol.

    Science.gov (United States)

    Jamil, Firas A; Al-Adili, Sahar Shakir

    2017-03-01

    Many treatment modalities have been introduced for correction of deficient alveolar ridge width. Bone expansion through the ridge split procedure is one of them. This technique was initiated in order to overcome many problems that usually associated with grafting procedures. The present study evaluated the effectiveness of piezoelectric device in performing ridge split using single-stage approach and assessed the outcomes during a period of about 4 months after surgery. A total of 23 patients aged in range between 18 and 60 years underwent ridge split procedure with immediate insertion of dental implants. A panoramic radiograph was obtained before surgery. The gained bone was measured and surgical complications were recorded. Implants stability was measured using Osstell device. Postoperative clinical complications were assessed. After a healing period of 16 weeks, all the implants were uncovered and evaluated regarding clinical, radiographic, and resonance frequency analysis findings. The totally implemented ridge split procedures were 26 cases including 57 implants inserted immediately at the time of surgery. The initial ridge width varied between 1 and 3.5 mm while the final width ranged from 5.5 to 8 mm. The minimum bone gain was 2.5 mm and the maximum value reached up to 7 mm. Few and insignificant clinical complications were recorded during the whole study. The survival rate was 100%. The study results indicated that piezoelectric ridge splitting technique is an effective, safe, and minimally invasive procedure. This technique has showed to be very successful in reducing the overall treatment period.

  7. Relationship between the position of the mental foramen and the anterior loop of the inferior alveolar nerve as determined by cone beam computed tomography combined with mimics.

    Science.gov (United States)

    Chen, Zhuogeng; Chen, Donghui; Tang, Li; Wang, Fenfen

    2015-01-01

    The position of the mental foramen and the anterior loop length of the inferior alveolar nerve serve as important anatomical landmarks for surgical procedures in the anterior mandibular region. The purpose of this study was to determine the relationship between the anterior loop of the inferior alveolar nerve and the mental foramen by combining cone beam computed tomography and Mimics, a software used to construct 3-dimensional (3D) interactive models of anatomical structures. Cone beam computed tomography images from a total of 60 patients were obtained and studied using GALAXY viewer or were imported into Mimics. The anterior loop of the inferior alveolar nerve was reconstructed 3-dimensionally, and then relevant parameters were measured. The parameters were measured, and their values include mean (SD) anterior loop length, 1.16 (1.78) mm; anterior loop angle, 19.13 (26.89) degrees; inferior alveolar canal diameter, 3.01 (0.67) mm; height of the inferior alveolar canal, 10.32 (1.56) mm; 2-dimensional mental foramen diameter, 2.97 (0.61) mm; 3D mental foramen diameter, 2.95 (0.59) mm; 2-dimensional vertical height of the mental foramen, 14.67 (1.67) mm; and 3D vertical height of the mental foramen, 14.61 (1.69) mm. The mental foramen was located apically between the first and second premolars in 51.67% and below the second premolar in 40.83% of the cases. A relationship was observed between the location of the mental foramen and the presence of the anterior loop of the inferior alveolar nerve. We highlight the effectiveness of cone beam computed tomography and 3D reconstruction in the identification of important anatomical structures relevant for preoperative assessment for surgical procedures in the anterior region of the mandible.

  8. Alveolar ventilation in children during flexible bronchoscopy.

    Science.gov (United States)

    Sadot, Efraim; Gut, Guy; Sivan, Yakov

    2016-11-01

    Hypoxia and hypercarbia complicate flexible bronchoscopy (FB). Unlike oxygenation by pulse-oximetry, alveolar ventilation is not routinely monitored during FB. The aim of this study was to investigate ventilation in children undergoing FB by measuring carbon-dioxide (CO2 ) levels using the transcutaneous technique. Children admitted for FB were recruited. In addition to routine monitoring, transcutaneous CO2 (TcCO2 ) levels were recorded. All were sedated using the same protocol. Ninety-five children were studied. There was no association between peak TcCO2 or rise in TcCO2 and age, weight percentile, bronchoscope size, or diagnosis. Median baseline TcCO2 was 36 mmHg (IQR 32,40), median peak TcCO2 was 51 mmHg (IQR 43,62) with median TcCO2 rise of 17 mmHg (IQR 6.5,23.7). A rise of 15 mmHg or higher was recorded in 55% (n = 52) patients. Children requiring total propofol dose over 3.5 mg/kg had a significantly higher TcCO2 peak of 57.6 mmHg (IQR 47.8,66.7) compared to 47.1 mmHg (IQR 40,57) (P = 0.004) and a higher rise in TcCO2 22.5 mmHg (IQR 17,33.9) compared to 13.6 mmHg (6,22) (P = 0.001). Results were not affected by intranasal midazolam and broncho-alveolar lavage. No complications were reported. Non clinically significant (i.e., not lower than 90%) brief drops in oxygen saturation were observed. A large proportion of children undergoing FB have significant alveolar hypoventilation indicated by a rise in TcCO2 . Monitoring ventilation with TcCO2 is feasible and should be added during FB particularly in cases that are expected to require large amounts of sedation and patients susceptible to complications from respiratory acidosis. Pediatr Pulmonol. 2016;51:1177-1182. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  9. Oak Ridge National Laboratory Core Competencies

    Energy Technology Data Exchange (ETDEWEB)

    Roberto, J.B.; Anderson, T.D.; Berven, B.A.; Hildebrand, S.G.; Hartman, F.C.; Honea, R.B.; Jones, J.E. Jr.; Moon, R.M. Jr.; Saltmarsh, M.J.; Shelton, R.B. [and others

    1994-12-01

    A core competency is a distinguishing integration of capabilities which enables an organization to deliver mission results. Core competencies represent the collective learning of an organization and provide the capacity to perform present and future missions. Core competencies are distinguishing characteristics which offer comparative advantage and are difficult to reproduce. They exhibit customer focus, mission relevance, and vertical integration from research through applications. They are demonstrable by metrics such as level of investment, uniqueness of facilities and expertise, and national impact. The Oak Ridge National Laboratory (ORNL) has identified four core competencies which satisfy the above criteria. Each core competency represents an annual investment of at least $100M and is characterized by an integration of Laboratory technical foundations in physical, chemical, and materials sciences; biological, environmental, and social sciences; engineering sciences; and computational sciences and informatics. The ability to integrate broad technical foundations to develop and sustain core competencies in support of national R&D goals is a distinguishing strength of the national laboratories. The ORNL core competencies are: 9 Energy Production and End-Use Technologies o Biological and Environmental Sciences and Technology o Advanced Materials Synthesis, Processing, and Characterization & Neutron-Based Science and Technology. The distinguishing characteristics of each ORNL core competency are described. In addition, written material is provided for two emerging competencies: Manufacturing Technologies and Computational Science and Advanced Computing. Distinguishing institutional competencies in the Development and Operation of National Research Facilities, R&D Integration and Partnerships, Technology Transfer, and Science Education are also described. Finally, financial data for the ORNL core competencies are summarized in the appendices.

  10. Hemorragia alveolar associada a nefrite lúpica Alveolar hemorrhage associated with lupus nephritis

    Directory of Open Access Journals (Sweden)

    Ricardo Henrique de Oliveira Braga Teixeira

    2003-12-01

    Full Text Available Hemorragia alveolar, como causa de insuficiência respiratória, é pouco freqüente, com diversas etiologias possíveis. Entre elas, o lúpus eritematoso sistêmico, que se apresenta geralmente como síndrome pulmão-rim, possui alta morbimortalidade. Acredita-se que a patogênese da microangiopatia, tanto renal como pulmonar, esteja associada ao depósito de imunocomplexos, que ativariam as vias de apoptose celular. Relatam-se dois casos de pacientes com nefrite lúpica que evoluíram com hemorragia alveolar associada à insuficiência respiratória necessitando de ventilação mecânica com evoluções totalmente distintas frente às terapias farmacológicas. O achado de anticorpos antimembrana basal em um dos casos evidencia a multiplicidade de mecanismos fisiopatológicos possivelmente envolvidos, que poderiam justificar as respostas heterogêneas frente aos tratamentos disponíveis.Alveolar hemorrhage leading to respiratory failure is uncommon. Various etiologies have been reported, including systemic lupus erythematosus, which generally presents as pulmonary-renal syndrome. It is believed that the pathogenesis of microangiopathy is related to deposits of immune complexes that lead to activation of cellular apoptosis. The authors report two cases of alveolar hemorrhage and respiratory failure, both requiring mechanical ventilation. The two cases had opposite outcomes after pharmacological therapy. The presence of anti-glomerular basement membrane antibodies in one of the cases demonstrates the multiplicity of physiopathological mechanisms that may be involved. This multiplicity of mechanisms provides a possible explanation for the heterogeneous responses to the available treatments.

  11. Computed tomography of the alveolar bone; Computertomographie des Alveolarkammes

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, H. [Bonn Univ. (Germany). Radiologische Klinik

    1996-03-01

    In addition to the conventional radiological methods used in odontology, computed tomography (CT) provides superposition-free images of the mandible and maxilla. Its value has been proved not only in cases of malignancy but also in many other problems. If an examination is performed with a slice thickness of less than 1.5 mm, the form and position of retained teeth in the alveolar bone, as well as subsequent lesions of neighboring permanent teeth, can be visualized so that early treatment can be planned. If the parodontal space of a retained tooth is visible, orthodontic intervention is possible. Precise assessment of horizontal or vertical bone loss is essential in inflammatory dental diseases. The morphology and extent of benign cystic lesions are also shown by CT. With CT surgical strategy of an intended implant therapy can take into account the remaining bone substance and the exact position of nerves and foramina. If such therapy is possible, the location, form and number of implants are easily defined. (orig.) [Deutsch] Die Computertomographie ermoeglicht in Ergaenzung zu den in der Zahnheilkunde gebraeuchlichen radiologischen Untersuchungsverfahren eine ueberlagerungsfreie Darstellung von Ober- und Unterkiefer. Neben der bereits etablierten Anwendung der CT bei malignen Erkrankungen hat sich ihr Einsatz bei weiteren Fragestellungen bewaehrt. Wird die Untersuchung mit einer Schichtdicke von weniger als 1,5 mm durchgefuehrt, lassen sich Form und Lage retinierter Zaehne im Kieferknochen und die durch die retinierten Zaehne verursachten Schaeden an bleibenden Zaehnen beurteilen, so dass eine fruehzeitige Therapie moeglich ist. Laesst sich der Parodontalspalt des retinierten Zahnes abgrenzen, ist eine kieferorthopaedische Einordnung moeglich. Bei entzuendlichen Zahnerkrankungen ist der horizontale und vertikale Knochenabbau genau zu bestimmen. Die Morphologie und Ausdehnung von benignen zystischen Raumforderungen ist mit der CT erfassbar. Vor einer beabsichtigten

  12. [Hyperostosis on the alveolar process margin].

    Science.gov (United States)

    Calandriello, M; Borsetti, A

    1977-01-01

    Defects of the bone margin requiring ostectomy and osteoplasty include hyperostotic processes, formations which, while recalling palatine and mandibular tori, have their own nosological slot. Hyperostosis is characterized by thickening of the cervical margin and is linked by a narrow isthmus to the underlying bone plane; it occurs with greatest frequency in the vestibular region. The personal case, in a man of 52, presented two sausage-shaped protuberances located apically at the alveolar margin in the two left arches. Their removal presented no problem of surgical technique as the hyperostosis had no close links with the underlying bone planes. Histological examination of the fragments showed that the hyperostotic tissue consisted of fascicular bone with an intima vascular component. Two years after the operation, the patient presents no signs of relapse and would appear to be completely cured.

  13. [Massive alveolar haemorrhage in Wegener's granulomatosis].

    Science.gov (United States)

    Valero-Roldán, J; Nuñez-Castillo, D; Fernández-Fígares, C; López-Leiva, I

    2014-01-01

    Wegener's granulomatosis is a systemic vasculitis with involvement of primary granulomatous upper and lower respiratory tract, glomerulonephritis and vasculitis of small vessels. The lung disease ranges from asymptomatic pulmonary nodules to pulmonary infiltrates and fulminant alveolar haemorrhage. The prognosis is poor due to kidney and respiratory failure, although the data are changing due to new treatments with glucocorticoids and cyclophosphamide. We report a case with severe lung disease, which after appropriate anamnesis, multiple tests, and optimal sequential action, the patient was diagnosed with Wegener's granulomatosis. This disease has a low incidence in the Emergency Department, where the patient history supported by the appropriate additional provides a diagnostic suspicion. It is important that the Emergency Department has the skills to manage the stability in these patients in order to resolve their symptoms. Copyright © 2013 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España. All rights reserved.

  14. Alveolar epithelial type II cells activate alveolar macrophages and mitigate P. Aeruginosa infection.

    Directory of Open Access Journals (Sweden)

    Shibichakravarthy Kannan

    Full Text Available Although alveolar epithelial type II cells (AECII perform substantial roles in the maintenance of alveolar integrity, the extent of their contributions to immune defense is poorly understood. Here, we demonstrate that AECII activates alveolar macrophages (AM functions, such as phagocytosis using a conditioned medium from AECII infected by P. aeruginosa. AECII-derived chemokine MCP-1, a monocyte chemoattractant protein, was identified as a main factor in enhancing AM function. We proposed that the enhanced immune potency of AECII may play a critical role in alleviation of bacterial propagation and pneumonia. The ability of phagocytosis and superoxide release by AM was reduced by MCP-1 neutralizing antibodies. Furthermore, MCP-1(-/- mice showed an increased bacterial burden under PAO1 and PAK infection vs. wt littermates. AM from MCP-1(-/- mice also demonstrated less superoxide and impaired phagocytosis over the controls. In addition, AECII conditioned medium increased the host defense of airway in MCP-1(-/- mice through the activation of AM function. Mechanistically, we found that Lyn mediated NFkappaB activation led to increased gene expression and secretion of MCP-1. Consequently Lyn(-/- mice had reduced MCP-1 secretion and resulted in a decrease in superoxide and phagocytosis by AM. Collectively, our data indicate that AECII may serve as an immune booster for fighting bacterial infections, particularly in severe immunocompromised conditions.

  15. Petrology of tectonically segmented Central Indian Ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Mukhopadhyay, R.; Iyer, S.D.

    Distribution and mineralogy of various rock types along the 4200-km-long slow-spreading Central Indian Ridge, between Owen fracture zone in the north and Indian Ocean triple junction in the south, is studied in the light of ridge segmentation...

  16. Pulley Ridge Swath Bathymetry Grid - filtered

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Pulley Ridge is a series of drowned barrier islands that extends almost 200 km in 60-100 m water depths. This drowned ridge is located on the Florida Platform in the...

  17. An identity for kernel ridge regression

    OpenAIRE

    Zhdanov, Fedor; Kalnishkan, Yuri

    2013-01-01

    This paper derives an identity connecting the square loss of ridge regression in on-line mode with the loss of the retrospectively best regressor. Some corollaries about the properties of the cumulative loss of on-line ridge regression are also obtained.

  18. On the ridging of intact lead ice

    Science.gov (United States)

    Hopkins, Mark A.

    1994-08-01

    The sea ice pressure ridging process is modeled using a two-dimensional particle simulation technique. In this model, blocks are broken from an intact sheet of relatively thin lead ice driven against a thick, multiyear floe at a constant speed. The blocks of ice rubble accumulate to form the ridge sail and keel. The energy consumed in ridge growth, including dissipation, is explicitly calculated. A series of numerical experiments are performed to establish the dependence of the energetics on the thickness of the ice sheet and the friction between blocks. The results suggest that the total energy required to create a pressure ridge is an order of magnitude greater than the potential energy in the ridge structure. A typical sea ice cover in the polar regions contains a variety of ice thicknesses that evolve in response to both dynamic and thermodynamic forcing. The variable thickness of the ice cover is created by deformation, which simultaneously causes formation of thick ice through ridge building and thin ice through lead creation. Since the energy expended in deformation is largely determined by the ridging process, an understanding of the energetics of pressure ridging is critical in the determination of ice strength on a geophysical scale.

  19. Sex Determination from Fingerprint Ridge Density | Gungadin ...

    African Journals Online (AJOL)

    This study was conducted with an aim to establish a relationship between sex and fingerprint ridge density. The fingerprints were taken from 500 subjects (250 males and 250 females) in the age group of 18-60 years. After taking fingerprints, the ridges were counted in the upper portion of the radial border of each print for all ...

  20. Manastash Ridge Observatory Autoguider Upgrade

    Science.gov (United States)

    Lozo, Jason; Huehnerhoff, Joseph; Armstrong, John; Davila, Adrian; Johnson, Courtney; McMaster, Alex; Olinger, Kyle

    2016-06-01

    The Astronomy Undergraduate Engineering Group (AUEG) at the University of Washington has designed and manufactured a novel autoguider system for the 0.8-meter telescope at the Manastash Ridge Observatory in Ellensburg, Washington. The system uses a pickoff mirror placed in the unused optical path, directing the outer field to the guide camera via a system of axi-symmetrically rotating relay mirrors (periscope). This allows the guider to sample nearly 7 times the area that would be possible with the same fixed detector. This system adds closed loop optical feedback to the tracking capabilities of the telescope. When tuned the telescope will be capable of acheiving 0.5 arcsecond tracking or better. Dynamic focusing of the primary optical path will also be an included feature of this system. This unique guider will be a much needed upgrade to the telescope allowing for increased scientific capability.

  1. The potential for vertical bone regeneration via maxillary periosteal elevation.

    Science.gov (United States)

    Mouraret, Sylvain; Von Kaeppler, Ericka; Bardet, Claire; Hunter, Daniel J; Chaussain, Catherine; Bouchard, Philippe; Helms, Jill A

    2014-12-01

    While many studies have been performed on the characteristics and regenerative capacity of long bone periosteum, the craniofacial periosteum remains poorly understood. The aim of this study was to investigate the potential for a maxillary periosteum tunnelling procedure to induce vertical alveolar bone regeneration. We employed a murine injury model that activates skeletal stem cells in the periosteum without overtly damaging the underlying cortical bone, preserving the integrity of the long bone and maxilla, and avoiding the introduction of pathological motion at the injury site. Further, we introduced a collagen sponge to serve as a scaffold, providing the necessary space for vertical bone regeneration. Periosteal elevation alone resulted in bone formation in the tibia and delayed bone resorption in the maxilla. With the presence of the collagen sponge, new bone formation occurred in the maxilla. Periosteal response to injury varies with anatomical location, so conclusions from long bone studies should not be extrapolated for craniofacial applications. Murine maxillary periosteum has the osteogenic potential to induce vertical alveolar bone regeneration. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. The influence of root surface distance to alveolar bone and periodontal ligament on periodontal wound healing.

    Science.gov (United States)

    Montevecchi, Marco; Parrilli, Annapaola; Fini, Milena; Gatto, Maria Rosaria; Muttini, Aurelio; Checchi, Luigi

    2016-10-01

    The purpose of this animal study was to perform a 3-dimensional micro-computed tomography (micro-CT) analysis in order to investigate the influence of root surface distance to the alveolar bone and the periodontal ligament on periodontal wound healing after a guided tissue regeneration (GTR) procedure. Three adult Sus scrofa domesticus specimens were used. The study sample included 6 teeth, corresponding to 2 third mandibular incisors from each animal. After coronectomy, a circumferential bone defect was created in each tooth by means of calibrated piezoelectric inserts. The experimental defects had depths of 3 mm, 5 mm, 7 mm, 9 mm, and 11 mm, with a constant width of 2 mm. One tooth with no defect was used as a control. The defects were covered with a bioresorbable membrane and protected with a flap. After 6 months, the animals were euthanised and tissue blocks were harvested and preserved for micro-CT analysis. New alveolar bone was consistently present in all experimental defects. Signs of root resorption were observed in all samples, with the extent of resorption directly correlated to the vertical extent of the defect; the medial third of the root was the most commonly affected area. Signs of ankylosis were recorded in the defects that were 3 mm and 7 mm in depth. Density and other indicators of bone quality decreased with increasing defect depth. After a GTR procedure, the periodontal ligament and the alveolar bone appeared to compete in periodontal wound healing. Moreover, the observed decrease in bone quality indicators suggests that intrabony defects beyond a critical size cannot be regenerated. This finding may be relevant for the clinical application of periodontal regeneration, since it implies that GTR has a dimensional limit.

  3. Numerical model of crustal accretion and cooling rates of fast-spreading mid-ocean ridges

    Directory of Open Access Journals (Sweden)

    P. Machetel

    2013-10-01

    crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis. The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.

  4. Alveolar cleft closure with iliac bone graft: A case report.

    Directory of Open Access Journals (Sweden)

    Tichvy Tammama

    2017-04-01

    Conclusion: The timing of alveolar bone grafting usually associated with the state of the developing of dentition. Post operative management is important to get a good result, and to prevent any complications.

  5. The role of synthetic biomaterials in resorptive alveolar bone regeneration

    Directory of Open Access Journals (Sweden)

    Kaličanin Biljana M.

    2007-01-01

    Full Text Available The alveolar bone tissue resorption defect has a significant role in dentistry. Because of the bone tissue deficit developed by alveolar resorption, the use of synthetic material CP/PLGA (calcium-phosphate/polylactide-co-gliycolide composite was introduced. Investigations were performed on rats with artificially produced resorption of the mandibular bone. The results show that the best effect on alveolar bone were attained by using nano-composite implants. The effect of the nanocomposite was ascertained by determining the calcium and phosphate content, as a basis of the hydroxyapatite structure. The results show that synthetic CP/PLGA nanocomposite alleviate the rehabilitation of weakened alveolar bone. Due to its osteoconductive effect, CP/PLGA can be the material of choice for bone substitution in the future.

  6. Structural changes and effect of denopamine on alveolar fluid ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... Structural changes and effect of denopamine on alveolar fluid ... rats with hypoxic lung injury, and the mechanisms .... was used for normality of variables. ..... of ROS as mediators of hypoxia-induced ion transport inhibition of.

  7. Omphalocele and alveolar capillary dysplasia: a new association.

    NARCIS (Netherlands)

    Gerrits, L.C.; Mol, A.C. de; Bulten, J.; Staak, F.H.J.M. van der; Heijst, A.F.J. van

    2010-01-01

    OBJECTIVE: First report of an infant with coexistent omphalocele and alveolar capillary dysplasia. DESIGN: Descriptive case report. SETTING: Neonatal intensive care unit of a tertiary care children's hospital. PATIENT: We describe a term infant with omphalocele and respiratory insufficiency

  8. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects

    OpenAIRE

    Khojasteh, Arash; Kheiri, Lida; Motamedian, Saeed Reza; Khoshkam, Vahid

    2017-01-01

    Background: Guided bone regeneration (GBR) is the most common technique for localized bone augmentation. Purpose: The purpose of this review was to categorize and assess various GBR approaches for the reconstruction of human alveolar bone defects. Materials and Methods: Electronic search of four databases including PubMed/Medline, EMBASE, Web of Science, and Cochrane and hand searching were performed to identify human trials attempting GBR for the reconstruction of alveolar bony defects for a...

  9. Is alveolar cleft reconstruction still controversial? (Review of literature)

    OpenAIRE

    Seifeldin, Sameh A

    2015-01-01

    Cleft lip and palate (CL/P) is a frequent congenital malformation that manifests in several varieties including unilateral or bilateral and complete or incomplete. Alveolar cleft reconstruction remains controversial with regard to timing, graft materials, surgical techniques, and methods of evaluation. Many studies have been conducted addressing these points to develop an acceptable universal protocol for managing CL/P. The primary goal of alveolar cleft reconstruction in CL/P patients is to ...

  10. Anaesthetic management of bilateral alveolar proteinosis for bronchopulmonary lavage.

    Directory of Open Access Journals (Sweden)

    Dixit R

    1998-01-01

    Full Text Available The most hazardous manifestation of pulmonary alveolar proteinosis is progressive hypoxia for which bronchopulmonary lavage (BPL is the single most effective treatment. Unfortunately this procedure under general anesthesia itself increases the risk of hypoxia due to the need for one lung ventilation. It was therefore considered interesting to report the successful anaesthetic management of a patient with pulmonary alveolar proteinosis for Bronchopulmonary lavage.

  11. Alveolar lymphangioma in infants: report of two cases.

    LENUS (Irish Health Repository)

    FitzGerald, Kirsten

    2009-06-01

    The alveolar lymphangioma is a benign but relatively rare condition found only in the oral cavities of black infants. Dentists practising in Ireland may be unaware of this condition due to its racial specificity. This paper presents two case reports of multiple alveolar lymphangiomas found in black infants in a children\\'s hospital in Ireland. The epidemiology, aetiology, clinical presentation, histology, and management options are discussed. The photographs should aid the practitioner in recognising these lesions.

  12. Modified Dento - Alveolar Distraction Osteogenesis Technique for Rapid Canine Retraction

    Directory of Open Access Journals (Sweden)

    Sameer Patil

    2012-01-01

    Full Text Available Distraction Osteogenesis claims to reduce the duration of treatment as well aid in conservation of anchorage. With the introduction of Dento- alveolar distraction retraction of canine can now be done in about 2-3 weeks with minimal loss of anchorage and little/no root resorption. However, surgical procedure required for dento-alveolar distraction can cause significant swelling and post operative discomfort. Our small modification in the surgical procedure drastically reduces the discomfort and improves patient compliance.

  13. Inferior alveolar nerve sensitivity changes after mandibular trauma

    OpenAIRE

    Simonas Grybauskas; Algirdas Lukosiunas; Gintautas Sabalys; Ricardas Kubilius; Dainius Razukevicius

    2010-01-01

    The investigation was performed on 195 patients, who had fracture on mandibular angle zone. In control group pain thresholds of infraorbital nerve and inferior alveolar nerve did not differ significantly (p > 0.05). Consequently, lesion degree of inferior alveolar nerve and its functional recovery dynamics were estimated objectively according to pain threshold and lesion index of neural function. Stump dislocation extent has influence on neural lesion: the more expressed dislocation, the high...

  14. Alveolar lymphangioma in infants: report of two cases.

    LENUS (Irish Health Repository)

    FitzGerald, Kirsten

    2012-02-01

    The alveolar lymphangioma is a benign but relatively rare condition found only in the oral cavities of black infants. Dentists practising in Ireland may be unaware of this condition due to its racial specificity. This paper presents two case reports of multiple alveolar lymphangiomas found in black infants in a children\\'s hospital in Ireland. The epidemiology, aetiology, clinical presentation, histology, and management options are discussed. The photographs should aid the practitioner in recognising these lesions.

  15. The anatomical relationship between the roots of mandibular second molars and the inferior alveolar nerve.

    Science.gov (United States)

    Chong, B S; Quinn, A; Pawar, R R; Makdissi, J; Sidhu, S K

    2015-06-01

    To evaluate the anatomical relationship between the roots of mandibular second molars and the inferior alveolar nerve (IAN) in relation to the risk of potential nerve injury during root canal treatment. Cone-beam computed tomography (CBCT) images from the patient record database at a dental hospital were selected. The anonymized CBCT images were reconstructed and examined in three planes (coronal, axial and sagittal) using 3D viewing software. The relationship between each root apex of mandibular second molars and the IAN was evaluated by measuring the horizontal and vertical distances from coronal CBCT sections, and the actual distance was then calculated mathematically using Pythagoras' theorem. In 55% of the 272 mandibular second molar roots evaluated, from a total of 134 scans, the distance between the anatomical root apex and the IAN was ≤3 mm. In over 50% of the cases evaluated, there was an intimate relationship between the roots of mandibular second molars and the inferior alveolar nerve (IAN). Therefore, root canal treatment of mandibular second molars may pose a more significant potential risk of IAN injury; necessary precautions should be exercised, and the prudent use of CBCT should be considered if an intimate relationship is suspected. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  16. Keratinized Gingiva Height Increases After Alveolar Corticotomy and Augmentation Bone Grafting.

    Science.gov (United States)

    Wilcko, M Thomas; Ferguson, Donald J; Makki, Laith; Wilcko, William M

    2015-10-01

    The aim of the present study is to compare the keratinized gingival tissue (KT) height labial to the mandibular incisors after active orthodontic treatment (AOT) with and without alveolar corticotomy and bone grafting. Two orthodontically treated groups of 35 patients each, with (Cort) and without (Conv) alveolar decortication and augmentation bone grafting, are matched in this case-control study for sample size, sex, mandibular premolar extractions, pretreatment age, post-treatment observation period, and pretreatment KT height. Standardized digital frontal occlusion photographs taken before and at least 1 year after AOT were adjusted to 96 dots per inch and measured with image analysis software for vertical KT height labial to each mandibular incisor. An average of 1.5 years after completion of AOT, KT height had increased significantly by 0.78 mm (P evidence-based studies, the value-added protection of KT height increase after decortication and augmentation bone grafting offsets the concerns of orthodontic proclination or expanding mandibular incisors facially.

  17. Quantification and visualization of alveolar bone resorption from 3D dental CT images

    Energy Technology Data Exchange (ETDEWEB)

    Nagao, Jiro; Mori, Kensaku; Kitasaka, Takayuki; Suenaga, Yasuhito [Nagoya University, Graduate School of Information Science, Nagoya (Japan); Yamada, Shohzoh; Naitoh, Munetaka [Aichi-Gakuin University, School of Dentistry, Nagoya (Japan)

    2007-06-15

    Purpose A computer aided diagnosis (CAD) system for quantifying and visualizing alveolar bone resorption caused by periodontitis was developed based on three-dimensional (3D) image processing of dental CT images. Methods The proposed system enables visualization and quantification of resorption of alveolar bone surrounding and between the roots of teeth. It has the following functions: (1) vertical measurement of the depth of resorption surrounding the tooth in 3D images, avoiding physical obstruction; (2) quantification of the amount of resorption in the furcation area; and (3) visualization of quantification results by pseudo-color maps, graphs, and motion pictures. The resorption measurement accuracy in the area surrounding teeth was evaluated by comparing with dentist's recognition on five real patient CT images, giving average absolute difference of 0.87 mm. An artificial image with mathematical truth was also used for measurement evaluation. Results The average absolute difference was 0.36 and 0.10 mm for surrounding and furcation areas, respectively. The system provides an intuitive presentation of the measurement results. Conclusion Computer aided diagnosis of 3D dental CT scans is feasible and the technique is a promising new tool for the quantitative evaluation of periodontal bone loss. (orig.)

  18. A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease

    Directory of Open Access Journals (Sweden)

    Mario Aimetti

    2017-01-01

    Full Text Available Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement.

  19. A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease.

    Science.gov (United States)

    Aimetti, Mario; Manavella, Valeria; Cricenti, Luca; Romano, Federica

    2017-01-01

    Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement.

  20. Pulmonary surfactant surface tension influences alveolar capillary shape and oxygenation.

    Science.gov (United States)

    Ikegami, Machiko; Weaver, Timothy E; Grant, Shawn N; Whitsett, Jeffrey A

    2009-10-01

    Alveolar capillaries are located in close proximity to the alveolar epithelium and beneath the surfactant film. We hypothesized that the shape of alveolar capillaries and accompanying oxygenation are influenced by surfactant surface tension in the alveolus. To prove our hypothesis, surfactant surface tension was regulated by conditional expression of surfactant protein (SP)-B in Sftpb(-/-) mice, thereby inhibiting surface tension-lowering properties of surfactant in vivo within 24 hours after depletion of Sftpb. Minimum surface tension of isolated surfactant was increased and oxygen saturation was significantly reduced after 2 days of SP-B deficiency in association with deformation of alveolar capillaries. Intravascularly injected 3.2-mum-diameter microbeads through jugular vein were retained within narrowed pulmonary capillaries after reduction of SP-B. Ultrastructure studies demonstrated that the capillary protrusion typical of the normal alveolar-capillary unit was reduced in size, consistent with altered pulmonary blood flow. Pulmonary hypertension and intrapulmonary shunting are commonly associated with surfactant deficiency and dysfunction in neonates and adults with respiratory distress syndromes. Increased surfactant surface tension caused by reduction in SP-B induced narrowing of alveolar capillaries and oxygen desaturation, demonstrating an important role of surface tension-lowering properties of surfactant in the regulation of pulmonary vascular perfusion.

  1. Populations at Risk for Alveolar Echinococcosis, France

    Science.gov (United States)

    Piarroux, Martine; Piarroux, Renaud; Knapp, Jenny; Bardonnet, Karine; Dumortier, Jérôme; Watelet, Jérôme; Gerard, Alain; Beytout, Jean; Abergel, Armand; Bresson-Hadni, Solange

    2013-01-01

    During 1982–2007, alveolar echinococcosis (AE) was diagnosed in 407 patients in France, a country previously known to register half of all European patients. To better define high-risk groups in France, we conducted a national registry-based study to identify areas where persons were at risk and spatial clusters of cases. We interviewed 180 AE patients about their way of life and compared responses to those of 517 controls. We found that almost all AE patients lived in 22 départements in eastern and central France (relative risk 78.63, 95% CI 52.84–117.02). Classification and regression tree analysis showed that the main risk factor was living in AE-endemic areas. There, most at-risk populations lived in rural settings (odds ratio [OR] 66.67, 95% CI 6.21–464.51 for farmers and OR 6.98, 95% CI 2.88–18.25 for other persons) or gardened in nonrural settings (OR 4.30, 95% CI 1.82–10.91). These findings can help sensitization campaigns focus on specific groups. PMID:23647623

  2. Antibiotic uptake by alveolar macrophages of smokers.

    Science.gov (United States)

    Hand, W L; Boozer, R M; King-Thompson, N L

    1985-01-01

    Cigarette smoking, particularly when associated with chronic pulmonary disease, increases the risk of respiratory tract infection. Thus, we elevated the uptake of antibiotics by alveolar macrophages (AM) obtained by bronchoalveolar lavage from persons who smoke and have associated pulmonary abnormalities, circumstances which adversely affect certain macrophage functions. The entry of radiolabeled drugs into AM was determined by a velocity-gradient centrifugation technique, and uptake was expressed as the ratio of cellular to extracellular antibiotic concentration (C/E). Cefamandole and penicillin G were taken up poorly by the AM obtained from smokers (C/E less than or equal to 1). Cellular levels of isoniazid, gentamicin, and tetracycline were similar to their extracellular concentrations. The lipid-soluble drugs lincomycin, chloramphenicol, and rifampin were concentrated severalfold by the AM from smokers (C/E = 3 to 11). Ethambutol also entered macrophages readily (C/E = 11). Erythromycin and clindamycin were massively concentrated by the AM from smokers (C/E = 23 to 56). The AM of smokers accumulated a lipid-soluble antibiotic (rifampin) and actively transported agents (erythromycin propionate, clindamycin) more avidly than did the AM of nonsmokers. Augmented uptake of these antibiotics by the AM of smokers may be related to structural and functional alterations induced by smoking. PMID:3985596

  3. [Alveolar soft part sarcoma in pediatric patients].

    Science.gov (United States)

    Paillard, Catherine; Coulomb, Aurore; Helfre, Sylvie; Orbach, Daniel

    2015-09-01

    Alveolar soft part sarcoma, ASPS, is a rare malignant tumor, with preferential primary localization in limbs, usually occurring in adolescents and young adults. This sarcoma, well defined histologically and at molecular level, has an indolent course, but a high potential metastatic pulmonary and cerebral evolution, sometimes late. ASPS is characterized by an almost specific translocation t(X, 17)(p11;25) which creates a fusion protein, APSL-TFE3, acting as an aberrant transcription factor. An in-bloc resection of the primary tumor is the treatment of choice in cases of localized disease. Conventional chemotherapy is generally ineffective. The role of radiotherapy is discussed in case of micro- or macroscopical incomplete residue. It seems to reduce local recurrence, but did not influence overall survival. The 5 years survival rate in children, adolescents and young adults is close to 80% in case of localized disease but poorer in presence of metastases. Recently, systemic anti-tumoral treatments have been focused on the use of targeted therapies. Anti-angiogenic drugs and tyrosine kinase inhibitors are the most promising approaches, but require further study. Prognostic risk factors in the literature are age (>10Y), tumor size (>5cm) and presence of metastases. This article reviews the clinical manifestations, diagnosis modalities, radiographic characteristics and therapeutic strategy of this disease in the pediatric population. Copyright © 2015 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

  4. Vitronectin protects alveolar macrophages from silica toxicity.

    Science.gov (United States)

    Wisniowski, P E; Spech, R W; Wu, M; Doyle, N A; Pasula, R; Martin, W J

    2000-08-01

    Silicosis is an interstitial lung disease caused by the inhalation of crystalline silicon dioxide. Current concepts suggest that a crucial step in the development of silicosis is silica-induced injury of alveolar macrophages (AM). The adhesive protein vitronectin is a natural constituent of the lung, in which its function is largely unexplored. This study investigated a possible role for vitronectin in protecting AM from silica exposure. In this study, the concentration of vitronectin was shown to be increased in the bronchoalveolar lavage fluid of silica-treated rats. Vitronectin affinity for silica was shown both in vitro and in vivo by immunostaining. Vitronectin reduced silica-induced injury to cultured AM as determined with the (51)Cr release assay. Vitronectin reduced silica-induced free radical production as determined with a cell-free thiobarbituric acid assay. Additionally, vitronectin reduced the silica-induced respiratory burst in AM as determined with chemiluminescence. This study suggests that vitronectin may protect AM during the initial exposure to silica.

  5. Diffuse Alveolar Hemorrhage Associated with Edoxaban Therapy

    Directory of Open Access Journals (Sweden)

    Kenichi Nitta

    2016-01-01

    Full Text Available Introduction. The main adverse effect of anticoagulant therapy is bleeding, and major bleeding, including intracranial, gastrointestinal, and retroperitoneal bleeding, has been reported as an adverse effect of edoxaban, a direct oral anticoagulant (DOAC. Bleeding during systemic anticoagulation with edoxaban presents a therapeutic conundrum, because there is currently no safe or efficacious reversal agent to stop major bleeding. Case Report. A 51-year-old woman had multiple traumatic injuries, including lower limb fractures. On day 8, she developed deep venous thrombosis, and edoxaban was administered orally. On day 38, she developed fungemia, which was treated with an antifungal drug. On day 43, she presented with dyspnea. Chest computed tomography scan showed bilateral diffuse ground-glass opacities in the whole lung fields. The results of the subsequent workup (i.e., serum levels of the antineutrophil cytoplasmic antibody, antinuclear antibody, and antiglomerular basement membrane antibody and microbiological study were unremarkable. Based on these findings, her condition was diagnosed as diffuse alveolar hemorrhage (DAH associated with edoxaban therapy. The lung opacities disappeared spontaneously after edoxaban therapy was discontinued. Conclusion. DAH is a dangerous complication associated with edoxaban therapy. DOACs, including edoxaban, should be prescribed with caution, especially for patients in a critical condition.

  6. Cardiovascular risk in pulmonary alveolar proteinosis.

    Science.gov (United States)

    Manali, Effrosyni D; Papadaki, Georgia; Konstantonis, Dimitrios; Tsangaris, Iraklis; Papaioannou, Andriana I; Kolilekas, Likurgos; Schams, Andrea; Kagouridis, Konstantinos; Karakatsani, Anna; Orfanos, Stylianos; Griese, Matthias; Papiris, Spyros A

    2016-02-01

    We hypothesized that cardiovascular events and/or indices of cardiac dysfunction may be increased in pulmonary alveolar proteinosis (PAP). Systemic and pulmonary arterial hypertension, arrhythmias, pulmonary embolism, stroke and ischemic heart attack were reported. Patients underwent serum anti-GM-CSF antibodies, disease severity score (DSS), Doppler transthoracic echocardiograph, glucose, thyroid hormones, lipids, troponin and pro-Brain natriuretic peptide (BNP) examination. Thirteen patients (8 female) were studied, median age of 47. Pro-BNP inversely related to DLCO% and TLC%; troponin directly related to DSS, age, P(A-a)O2, left atrium-, left ventricle-end-diastole diameter and BMI. On multiple regression analysis DSS was the only parameter significantly and strongly related with troponin (R(2) = 0.776, p = 0.007). No cardiovascular event was reported during follow-up. In PAP cardiovascular risk indices relate to lung disease severity. Therefore, PAP patients could be at increased risk for cardiovascular events. Quantitation of its magnitude and potential links to lungs' physiologic derangement will be addressed in future studies.

  7. Carlsberg Ridge and Mid-Atlantic Ridge: Comparison of slow spreading centre analogues

    Science.gov (United States)

    Murton, Bramley J.; Rona, Peter A.

    2015-11-01

    Eighty per cent of all mid-ocean spreading centres are slow. Using a mixture of global bathymetry data and ship-board multibeam echosounder data, we explore the morphology of global mid-ocean ridges and compare two slow spreading analogues: the Carlsberg Ridge in the north-west Indian Ocean between 57°E and 60°E, and the Kane to Atlantis super-segment of the Mid-Atlantic Ridge between 21°N and 31°N. At a global scale, mid-ocean spreading centres show an inverse correlation between segment length and spreading rate with segmentation frequency. Within this context, both the Mid-Atlantic Ridge super-segment and Carlsberg Ridge are similar: spreading at 22 and 26 mm/yr full rates respectively, being devoid of major transform faults, and being segmented by dextral, non-transform, second-order discontinuities. For these and other slow spreading ridges, we show that segmentation frequency varies inversely with flank height and ridge axis depth. Segments on both the Mid-Atlantic Ridge super-segment and Carlsberg Ridge range in aspect ratio (ridge flank height/axis width), depth and symmetry. Segments with high aspect ratios and deeper axial floors often have asymmetric rift flanks and are associated with indicators of lower degrees of melt flux. Segments with low aspect ratios have shallower axial floors, symmetric rift flanks, and evidence of robust melt supply. The relationship between segmentation, spreading rate, ridge depth and morphology, at both a global and local scale, is evidence that rates of melting of the underlying mantle and melt delivery to the crust play a significant role in determining the structure and morphology of slow spreading mid-ocean ridges.

  8. Petrography of basalts from the Carlsberg ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Banerjee, R.; Iyer, S.D.

    and olivine phenocrysts, in addition to numerous filled and unfilled vesicles. These basalts are of the moderately plagioclase phyric basalts (MPPB) variety and are comparable to those of the Mid-Atlantic Ridge...

  9. The influence of Aloe vera and xenograft XCB toward of bone morpho protein 2 BMP2 expression and amount of osteoblast of alveolar bone induced into tooth extraction sockets Cavia cobaya

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2014-12-01

    Full Text Available Tooth extraction can cause inflammation leading to alveolar ridge resorption. In addition, prominent ridge has crucial role for making denture su-ccessfully. Thus, socket preservation is needed to prevent greater alveolar ridge resorption. An innovative material, a combination of Aloe vera and xe-nograft (XCB, is then considered as a biogenic stimulator that can reduce inflammation, as a result, the growth of alveolar bone is expected to be impro-ved. This research is aimed to prove whether the mixture of Aloe vera and xenograft can stimulate BMP2 and increase osteoblasts. Forty-eight Cavia co-baya animals were divided into eight groups each of which consisted of six animals. The mandibular incisors of those Cavia cobaya animals were then extracted and filled with PEG as Group Control, XCB as Group XCB, Aloe vera as Group Aloe vera, and a combination of Aloe vera +XCB as Group Aloe vera +XCB. Next, the first four groups were sacrificed seven days after extraction, and the second four groups were sacrificed 30 days after extrac-tion. And then, immunohistochemical and histopathology examinations were conducted to examine BMP2 expression and osteoblasts. Based on the re-sult known that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblasts. It can be concluded that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblast cel . It can be used as an alternative material to increase the growth of alveolar bone after extraction.

  10. Simultaneous Sinus Lifting and Alveolar Distraction of a Severely Atrophic Posterior Maxilla for Oral Rehabilitation with Dental Implants

    Directory of Open Access Journals (Sweden)

    Takahiro Kanno

    2012-01-01

    Full Text Available We retrospectively reviewed a new preimplantation regenerative augmentation technique for a severely atrophic posterior maxilla using sinus lifting with simultaneous alveolar distraction, together with long-term oral rehabilitation with implants. We also analyzed the regenerated bone histomorphologically. This study included 25 maxillary sinus sites in 17 patients. The technique consisted of alveolar osteotomy combined with simultaneous sinus lifting. After sufficient sinus lifting, a track-type vertical alveolar distractor was placed. Following a latent period, patient self-distraction was started. After the required augmentation was achieved, the distractor was left in place to allow consolidation. The distractor was then removed, and osseointegrated implants (average of 3.2 implants per sinus site, 80 implants were placed. Bone for histomorphometric analysis was sampled from six patients and compared with samples collected after sinus lifting alone as controls (n=4. A sufficient alveolus was regenerated, and all patients achieved stable oral rehabilitation. The implant survival rate was 96.3% (77/80 after an average postloading followup of 47.5 months. Good bone regeneration was observed in a morphological study, with no significant difference in the rate of bone formation compared with control samples. This new regenerative technique could be a useful option for a severely atrophic maxilla requiring implant rehabilitation.

  11. Localized ridge augmentation with allogenic block grafts prior to implant placement: case reports and histologic evaluations.

    Science.gov (United States)

    Petrungaro, Paul S; Amar, Salomon

    2005-06-01

    The placement of dental implants is based on the amount of alveolar bone present in the edentulous site to be reconstructed. Insufficient alveolar contours may require bone grafting procedures to restore an adequate bone volume before implant placement. Larger osseous defects often require block grafts harvested from the symphysis or the ramus buccal shelf region. These provide adequate donor sites to harvest a graft sufficient to restore a significant defect in the osseous structures planned for implant placements. Autogenous block grafts have been well established to reconstruct these types of defects prior to implant placement procedures. However, surgical complications associated with the unfavorable anatomical structures and the necessity of large donor sites (e.g., symphysis and ramus buccal shelf) have led to the use of allogenic grafting materials. Recent developments in allogenic grafting materials have lead to the development of a corticocancellous block graft harvested from the iliac crest region. This study evaluates the clinical indications of these allogenic graft materials to replace compromised alveolar bone defects both horizontal and vertical in nature. The analysis is supported by re-entry procedures and histologic evaluations to substantiate predictability.

  12. Internal Tide Generation by Tall Ocean Ridges

    Science.gov (United States)

    2009-09-01

    dissipation is not phys- ical but illustrates the level of noise in the computation. Reproduced from [20]. The locations of the Hawaiian and Luzon ridges... assembled Foamlinx foam cutter, and (b) photograph while cutting a model ridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 2-6 Schematic of...respectively (from left to right): I and II for the subcritical wave field and I and II for the supercritical wave field. Cross-sections I and II are

  13. Dark and Bright Ridges on Europa

    Science.gov (United States)

    1998-01-01

    This high-resolution image of Jupiter's moon Europa, taken by NASA's Galileo spacecraft camera, shows dark, relatively smooth region at the lower right hand corner of the image which may be a place where warm ice has welled up from below. The region is approximately 30 square kilometers in area. An isolated bright hill stands within it. The image also shows two prominent ridges which have different characteristics; youngest ridge runs from left to top right and is about 5 kilometers in width (about 3.1 miles). The ridge has two bright, raised rims and a central valley. The rims of the ridge are rough in texture. The inner and outer walls show bright and dark debris streaming downslope, some of it forming broad fans. This ridge overlies and therefore must be younger than a second ridge running from top to bottom on the left side of the image. This dark 2 km wide ridge is relatively flat, and has smaller-scale ridges and troughs along its length.North is to the top of the picture, and the sun illuminates the surface from the upper left. This image, centered at approximately 14 degrees south latitude and 194 degrees west longitude, covers an area approximately 15 kilometers by 20 kilometers (9 miles by 12 miles). The resolution is 26 meters (85 feet) per picture element. This image was taken on December 16, 1997 at a range of 1300 kilometers (800 miles) by Galileo's solid state imaging system.The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech).This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://www.jpl.nasa.gov/ galileo.

  14. Oak Ridge Reservation environmental report for 1989

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, V.A.; Wilson, A.R. (eds.)

    1990-10-01

    This two-volume report, the Oak Ridge Reservation Environmental Report for 1989, is the nineteenth in an annual series that began in 1971. It reports the results of a comprehensive, year-round program to monitor the impact of operations at the three major US Department of Energy (DOE) production and research installations in Oak Ridge on the immediate areas' and surrounding region's groundwater and surface waters, soil, air quality, vegetation and wildlife, and through these multiple and varied pathways, the resident human population. Information is presented for the environmental monitoring Quality Assurance (QA) Program, audits and reviews, waste management activities, land special environmental studies. Data are included for the Oak Ridge Y-12 Plant, Oak Ridge National Laboratory (ORNL), and Oak Ridge Gaseous Diffusion Plant (ORGDP). Volume 1 presents narratives, summaries, and conclusions based on environmental monitoring at the three DOE installations and in the surrounding environs during calendar year (CY) 1989. Volume 1 is intended to be a stand-alone'' report about the Oak Ridge Reservation (ORR) for the reader who does not want an in-depth review of 1989 data. Volume 2 presents the detailed data from which these conclusions have been drawn and should be used in conjunction with Volume 1.

  15. Assessing the clarity of friction ridge impressions.

    Science.gov (United States)

    Hicklin, R Austin; Buscaglia, JoAnn; Roberts, Maria Antonia

    2013-03-10

    The ability of friction ridge examiners to correctly discern and make use of the ridges and associated features in finger or palm impressions is limited by clarity. The clarity of an impression relates to the examiner's confidence that the presence, absence, and attributes of features can be correctly discerned. Despite the importance of clarity in the examination process, there have not previously been standard methods for assessing clarity in friction ridge impressions. We introduce a process for annotation, analysis, and interchange of friction ridge clarity information that can be applied to latent or exemplar impressions. This paper: (1) describes a method for evaluating the clarity of friction ridge impressions by using color-coded annotations that can be used by examiners or automated systems; (2) discusses algorithms for overall clarity metrics based on manual or automated clarity annotation; and (3) defines a method of quantifying the correspondence of clarity when comparing a pair of friction ridge images, based on clarity annotation and resulting metrics. Different uses of this approach include examiner interchange of data, quality assurance, metrics, and as an aid in automated fingerprint matching. Published by Elsevier Ireland Ltd.

  16. Plume capture by a migrating ridge: Analog geodynamic experiments

    Science.gov (United States)

    Mendez, J. S.; Hall, P.

    2010-12-01

    Paleomagnetic data from the Hawaii-Emperor Seamount Chain (HESC) suggests that the Hawaiian hotspot moved rapidly (~40 mm/yr) between 81 - 47 Ma but has remained relatively stationary since that time. This implies that the iconic bend in the HESC may in fact reflect the transition from a period of rapid hotspot motion to a stationary state, rather than a change in motion of the Pacific plate. Tarduno et al. (2009) have suggested that this period of rapid hotspot motion might be the surface expression of a plume conduit returning to a largely vertical orientation after having been “captured” and tilted by a migrating mid-ocean ridge. We report on a series of analog fluid dynamic experiments designed to characterize the interaction between a migrating spreading center and a thermally buoyant mantle plume. Experiments were conducted in a clear acrylic tank (100 cm x 70 cm x 50 cm) filled with commercial grade high-fructose corn syrup. Plate-driven flow is modeled by dragging two sheets of Mylar film (driven by independent DC motors) in opposite directions over the surface of the fluid. Ridge migration is achieved by moving the point at which the mylar sheets diverge using a separate motor drive. Buoyant plume flow is modeled using corn syrup introduced into the bottom of the tank from an external, heated, pressurized reservoir. Small (~2 mm diameter), neutrally buoyant Delrin spheres are mixed into reservoir of plume material to aid in visualization. Plate velocities and ridge migration rate are controlled and plume temperature monitored using LabView software. Experiments are recorded using digital video which is then analyzed using digital image analysis software to track the position and shape of the plume conduit throughout the course of the experiment. The intersection of the plume conduit with the surface of the fluid is taken as an analog for the locus of hotspot volcanism and tracked as a function of time to obtain a hotspot migration rate. Experiments are

  17. Stratigraphic framework and distribution of lignite on Crowleys Ridge, Arkansas

    Science.gov (United States)

    Meissner, Charles R.

    1983-01-01

    The purpose of this report is to establish a stratigraphic framework of lignite beds and associated strata of Crowleys Ridge, Arkansas. Drill hole data provided by the Arkansas Geological Commission is used in the synthesis and interpretation. Areas containing lignite of potential resource value are also delineated. To illustrate the regional stratigraphic framework of Crowleys Ridge, a cross section was constructed from logs of selected oil and gas test wells, along or adjacent to the north-south trending ridge over a distance of about 115 miles. This section reveals that lignite-bearing Tertiary formations dip gently southward along the ridge. The Paleocene-Eocene Wilcox Group forms the bedrock in the northern part of the ridge and successively younger bedrock of the Eocene Claiborne and Jackson Groups is identified in the central and southern part of the ridge. Crowleys Ridge is mantled with alluvium and loess of Quaternary age, and sand and gravel beds of the Lafayette Formation of Pliocene (?) age that unconformably overlie the Paleocene and Eocene rocks. The thickness of lignite-bearing sedimentary deposits ranges from 830 feet in the north to 2,480 feet in the south. The Wilcox, Claiborne, and Jackson Groups of Paleocene and Eocene age are believed to be fluvial-deltaic in origin. The detailed vertical and horizontal stratigraphic characteristics and distribution of lignite beds in the sediments were determined by constructing seven cross sections from lithologic and geophysical logs of the lignite investigations on Crowleys Ridge by the Arkansas Geological Commission and private companies. Correlation and interpretation of the lignite-bearing strata reveal ten lignite beds of resource potential. These lignite beds range from a few inches to 9.5 ft in thickness and are assigned to stratigraphic intervals that are designated as zone 1 through 7. Zone 1 is near the middle of the Wilcox Group and zone 7 is near the middle of the overlying Claiborne Group. Some

  18. Crustal thickness variations at oceanic ridge segment and transform faults: implications for three-dimensional melt extraction pathways

    Science.gov (United States)

    Hebert, L. B.; Montesi, L. G.

    2010-12-01

    Transform faults constitute a ubiquitous component of the global mid-ocean ridge system. Enhanced cooling is usually thought to produce a relatively thick lithosphere underneath the transform domain, which would act as a keel to segregate magma between adjacent mid-ocean ridges. However, modeling of gravity anomalies at fast spreading ridges implies thickened crust in the transform domain. These anomalies may correspond to additional melt produced by intra-transform spreading, melt that is easily extracted in the transform domain due to faulting, or melt redistributed from the adjacent spreading centers by dike intrusion in the crust. We test the first two ideas using a three-dimensional numerical model of melt migration and extraction along a transform zone and adjacent ridge segments. First, mantle flow and the thermal structure of a segmented spreading center are determined. Melt is assumed to travel vertically before being collected and migrating beneath a low-permeability boundary inclined towards the ridge segment axis. A melt extraction zone is defined around any plate boundary to represent a domain where faults and/or dikes lead to rapid lateral and vertical melt migration toward the surface. The effect of the size of the melt extraction zone on melt distribution and crustal thickness is examined first for a simplified ridge-transform-ridge geometry and then for a model of the Siqueiros transform on the East Pacific Rise. Intra-transform spreading centers (ITSCs) are included to test the possibility of ITSC-related melting. On the basis of crustal thickness variations along the fast-slipping Siqueiros fault, we constrain the melt extraction zone to be on the order of 20 km thick within 10 km of the transform axis, indicating that melt extraction likely occurs through a dike complex extending to great depth into the mantle.

  19. Partial pulmonary embolization disrupts alveolarization in fetal sheep

    Directory of Open Access Journals (Sweden)

    Hooper Stuart B

    2010-04-01

    Full Text Available Abstract Background Although bronchopulmonary dysplasia is closely associated with an arrest of alveolar development and pulmonary capillary dysplasia, it is unknown whether these two features are causally related. To investigate the relationship between pulmonary capillaries and alveolar formation, we partially embolized the pulmonary capillary bed. Methods Partial pulmonary embolization (PPE was induced in chronically catheterized fetal sheep by injection of microspheres into the left pulmonary artery for 1 day (1d PPE; 115d gestational age; GA or 5 days (5d PPE; 110-115d GA. Control fetuses received vehicle injections. Lung morphology, secondary septal crests, elastin, collagen, myofibroblast, PECAM1 and HIF1α abundance and localization were determined histologically. VEGF-A, Flk-1, PDGF-A and PDGF-Rα mRNA levels were measured using real-time PCR. Results At 130d GA (term ~147d, in embolized regions of the lung the percentage of lung occupied by tissue was increased from 29 ± 1% in controls to 35 ± 1% in 1d PPE and 44 ± 1% in 5d PPE fetuses (p VEGF and Flk-1, although a small increase in PDGF-Rα expression at 116d GA, from 1.00 ± 0.12 in control fetuses to 1.61 ± 0.18 in 5d PPE fetuses may account for impaired differentiation of alveolar myofibroblasts and alveolar development. Conclusions PPE impairs alveolarization without adverse systemic effects and is a novel model for investigating the role of pulmonary capillaries and alveolar myofibroblasts in alveolar formation.

  20. The global burden of alveolar echinococcosis.

    Directory of Open Access Journals (Sweden)

    Paul R Torgerson

    Full Text Available BACKGROUND: Human alveolar echinococcosis (AE is known to be common in certain rural communities in China whilst it is generally rare and sporadic elsewhere. The objective of this study was to provide a first estimate of the global incidence of this disease by country. The second objective was to estimate the global disease burden using age and gender stratified incidences and estimated life expectancy with the disease from previous results of survival analysis. Disability weights were suggested from previous burden studies on echinococcosis. METHODOLOGY/PRINCIPAL FINDINGS: We undertook a detailed review of published literature and data from other sources. We were unable to make a standardised systematic review as the quality of the data was highly variable from different countries and hence if we had used uniform inclusion criteria many endemic areas lacking data would not have been included. Therefore we used evidence based stochastic techniques to model uncertainty and other modelling and estimating techniques, particularly in regions where data quality was poor. We were able to make an estimate of the annual global incidence of disease and annual disease burden using standard techniques for calculation of DALYs. Our studies suggest that there are approximately 18,235 (CIs 11,900-28,200 new cases of AE per annum globally with 16,629 (91% occurring in China and 1,606 outside China. Most of these cases are in regions where there is little treatment available and therefore will be fatal cases. Based on using disability weights for hepatic carcinoma and estimated age and gender specific incidence we were able to calculate that AE results in a median of 666,434 DALYs per annum (CIs 331,000-1.3 million. CONCLUSIONS/SIGNIFICANCE: The global burden of AE is comparable to several diseases in the neglected tropical disease cluster and is likely to be one of the most important diseases in certain communities in rural China on the Tibetan plateau.

  1. The global burden of alveolar echinococcosis.

    Science.gov (United States)

    Torgerson, Paul R; Keller, Krista; Magnotta, Mellissa; Ragland, Natalie

    2010-06-22

    Human alveolar echinococcosis (AE) is known to be common in certain rural communities in China whilst it is generally rare and sporadic elsewhere. The objective of this study was to provide a first estimate of the global incidence of this disease by country. The second objective was to estimate the global disease burden using age and gender stratified incidences and estimated life expectancy with the disease from previous results of survival analysis. Disability weights were suggested from previous burden studies on echinococcosis. We undertook a detailed review of published literature and data from other sources. We were unable to make a standardised systematic review as the quality of the data was highly variable from different countries and hence if we had used uniform inclusion criteria many endemic areas lacking data would not have been included. Therefore we used evidence based stochastic techniques to model uncertainty and other modelling and estimating techniques, particularly in regions where data quality was poor. We were able to make an estimate of the annual global incidence of disease and annual disease burden using standard techniques for calculation of DALYs. Our studies suggest that there are approximately 18,235 (CIs 11,900-28,200) new cases of AE per annum globally with 16,629 (91%) occurring in China and 1,606 outside China. Most of these cases are in regions where there is little treatment available and therefore will be fatal cases. Based on using disability weights for hepatic carcinoma and estimated age and gender specific incidence we were able to calculate that AE results in a median of 666,434 DALYs per annum (CIs 331,000-1.3 million). The global burden of AE is comparable to several diseases in the neglected tropical disease cluster and is likely to be one of the most important diseases in certain communities in rural China on the Tibetan plateau.

  2. Cediranib for Metastatic Alveolar Soft Part Sarcoma

    Science.gov (United States)

    Kummar, Shivaani; Allen, Deborah; Monks, Anne; Polley, Eric C.; Hose, Curtis D.; Ivy, S. Percy; Turkbey, Ismail B.; Lawrence, Scott; Kinders, Robert J.; Choyke, Peter; Simon, Richard; Steinberg, Seth M.; Doroshow, James H.; Helman, Lee

    2013-01-01

    Purpose Alveolar soft part sarcoma (ASPS) is a rare, highly vascular tumor, for which no effective standard systemic treatment exists for patients with unresectable disease. Cediranib is a potent, oral small-molecule inhibitor of all three vascular endothelial growth factor receptors (VEGFRs). Patients and Methods We conducted a phase II trial of once-daily cediranib (30 mg) given in 28-day cycles for patients with metastatic, unresectable ASPS to determine the objective response rate (ORR). We also compared gene expression profiles in pre- and post-treatment tumor biopsies and evaluated the effect of cediranib on tumor proliferation and angiogenesis using positron emission tomography and dynamic contrast-enhanced magnetic resonance imaging. Results Of 46 patients enrolled, 43 were evaluable for response at the time of analysis. The ORR was 35%, with 15 of 43 patients achieving a partial response. Twenty-six patients (60%) had stable disease as the best response, with a disease control rate (partial response + stable disease) at 24 weeks of 84%. Microarray analysis with validation by quantitative real-time polymerase chain reaction on paired tumor biopsies from eight patients demonstrated downregulation of genes related to vasculogenesis. Conclusion In this largest prospective trial to date of systemic therapy for metastatic ASPS, we observed that cediranib has substantial single-agent activity, producing an ORR of 35% and a disease control rate of 84% at 24 weeks. On the basis of these results, an open-label, multicenter, randomized phase II registration trial is currently being conducted for patients with metastatic ASPS comparing cediranib with another VEGFR inhibitor, sunitinib. PMID:23630200

  3. Vertical atlantoaxial dislocation

    OpenAIRE

    Ramaré, S.; Lazennec, J. Y.; Camelot, C.; Saillant, G.; Hansen, S.; Trabelsi, R.

    1999-01-01

    An unusual case of vertical atlantoaxial dislocation without medulla oblongata or spinal cord injury is reported. The pathogenic process suggested occipito-axial dislocation. The case was treated surgically with excellent results on mobility and pain.

  4. Coordination in vertical jumping

    NARCIS (Netherlands)

    Bobbert, Maarten F.; van Ingen Schenau, Gerrit Jan

    1988-01-01

    The present study was designed to investigate for vertical jumping the relationships between muscle actions, movement pattern and jumping achievement. Ten skilled jumpers performed jumps with preparatory countermovement. Ground reaction forces and cinematographic data were recorded. In addition,

  5. A clinical study of alveolar bone tissue engineering with cultured autogenous periosteal cells: coordinated activation of bone formation and resorption.

    Science.gov (United States)

    Nagata, Masaki; Hoshina, Hideyuki; Li, Minqi; Arasawa, Megumi; Uematsu, Kohya; Ogawa, Shin; Yamada, Kazuho; Kawase, Tomoyuki; Suzuki, Kenji; Ogose, Akira; Fuse, Ichiro; Okuda, Kazuhiro; Uoshima, Katsumi; Nakata, Koh; Yoshie, Hiromasa; Takagi, Ritsuo

    2012-05-01

    In ongoing clinical research into the use of cultured autogenous periosteal cells (CAPCs) in alveolar bone regeneration, CAPCs were grafted into 33 sites (15 for alveolar ridge augmentation and 18 for maxillary sinus lift) in 25 cases. CAPCs were cultured for 6weeks, mixed with particulate autogenous bone and platelet-rich plasma, and then grafted into the sites. Clinical outcomes were determined from high-resolution three-dimensional computed tomography (3D-CT) images and histological findings. No serious adverse events were attributable to the use of grafted CAPCs. Bone regeneration was satisfactory even in cases of advanced atrophy of the alveolar process. Bone biopsy after bone grafting with CAPCs revealed prominent recruitment of osteoblasts and osteoclasts accompanied by angiogenesis around the regenerated bone. 3D-CT imaging suggested that remodeling of the grafted autogenous cortical bone particles was faster in bone grafting with CAPCs than in conventional bone grafting. The use of CAPCs offers cell-based bone regeneration therapy, affording complex bone regeneration across a wide area, and thus expanding the indications for dental implants. Also, it enables the content of particulate autogenous bone in the graft material to be reduced to as low as 40%, making the procedure less invasive, or enabling larger amounts of graft materials to be prepared. It may also be possible to dispense with the use of autogenous bone altogether in the future. The results suggest that CAPC grafting induces bone remodeling, thereby enhancing osseointegration and consequently reducing postoperative waiting time after dental implant placement. Copyright © 2012 Elsevier Inc. All rights reserved.

  6. The efficacy of hydrothermally obtained carbonated hydroxyapatite in healing alveolar bone defects in rats with or without corticosteroid treatment

    Directory of Open Access Journals (Sweden)

    Marković Dejan

    2014-01-01

    Full Text Available Background/Aim. Autogenous bone grafting has been the gold standard in clinical cases when bone grafts are required for bone defects in dentistry. The study was undertaken to evaluate multilevel designed carbonated hydroxyapatite (CHA obtained by hydrothermal method, as a bone substitute in healing bone defects with or without corticosteroid treatment in rats as assessed by histopathologic methods. Methods. Bone defects were created in the alveolar bone by teeth extraction in 12 rats. The animals were initially divided into two groups. The experimental group was pretreated with corticosteroids: methylprednisolone and dexamethasone, intramuscularly, while the control group was without therapy. Posterior teeth extraction had been performed after the corticosteroid therapy. The extraction defects were fulfilled with hydroxyapatite with bimodal particle sizes in the range of 50-250 μm and the sample from postextocactional defect of the alveolar bone was analyzed pathohystologically. Results. The histopatological investigations confirmed the biologic properties of the applied material. The evident growth of new bone in the alveolar ridge was clearly noticed in both groups of rats. Carbonated HA obtained by hydrothermal method promoted bone formation in the preformed defects, confirming its efficacy for usage in bone defects. Complete resorption of the material’s particles took place after 25 weeks. Conclusion. Hydroxyapatite completely meets the clinical requirements for a bone substitute material. Due to its microstructure, complete resorption took place during the observation period of the study. Corticosteroid treatment did not significantly affect new bone formation in the region of postextractional defects. [Projekat Ministarstva nauke Republike Srbije, br. 172026

  7. Composition of vertical gardens

    OpenAIRE

    Sandeva, Vaska; Despot, Katerina

    2013-01-01

    Vertical gardens are fully functional gardens in areas where there is less oxygen and space, ideal for residential and urban cities where there is no vegetation; occupy a special place in interiors furniture. The gardens occupy an important aesthetic problem. Aesthetic task in vertical gardens can be achieved by forming sectors of identification in the urban landscape through the choice of a particular plant spatial composition and composition, to create comfort and representation in commu...

  8. Sea Ice Ridge Detection from ICESAR 2007

    Science.gov (United States)

    Zhu, Tingting; Spreen, Gunnar; Dierking, Wolfgang; Heygster, Georg; Li, Fei; Zhang, Yu; Zhang, Shengkai; Hao, Weifeng; Yuan, Lexian; Xiao, Feng

    2017-04-01

    Synthetic aperture radar (SAR) imagery can be used to capture sea ice surface deformation features including rafted ice, shear zones, pressure ridges and rubble ice caused by the divergence, convergence and shear of sea ice. It has been shown that pressure ridges can be observed as bright, curvilinear features in C-band and L-band SAR satellite images. A comparison of airborne L-band and C-band SAR data to identify deformation features (ridge) has concluded that L-band is preferable in most cases. To investigate in more detail how sea ice can be observed by SAR, the airborne measurement campaign ICESAR 2007 has been conducted. In this study, we use L-band and C-band airborne SAR data sets to detect ridges from the ICESAR 2007 campaign. Our region of interest (ROI) is the Fram Strait. One goal of this study is to identify possibilities if deformed ice areas can also be detected with the lower resolution (40 m) SAR of the Sentinel-1 satellite mission. We therefore consider the parameter configurations of the Sentinel-1 mission as a baseline in our study. Traditional techniques for ridge detection include line detection, edge detection, and direct threshold method. These methods are insufficient without considering the intensive speckle noise and contextual information in such high spatial resolution SAR imagery like we use here from ICESAR 2007. Another obstacle is to separate ridges from other deformed features in the SAR imagery. For tackling these issues, we propose using a structure tensor algorithm for ridge detection in the ICESAR 2007 data sets. For the tensor structure algorithm, sea ice ridges are described as the target enhanced by the tensor matrix and surrounding pixels are suppressed as the background using the weighted gradient distance. The length to width ratio is used to preserve ridge shaped features and avoids that they are being filtered out as noise. The structure tensor algorithm is validated for the ICESAR L-band HH and HV SAR imagery with a

  9. Sea ice ridging in the eastern Weddell Sea

    Science.gov (United States)

    Lytle, V. I.; Ackley, S. F.

    1991-10-01

    In August 1986, sea ice ridge heights and spatial frequency in the eastern Weddell Sea were measured using a ship-based acoustical sounder. Using a minimum ridge sail height of 0.75 m, a total of 933 ridges were measured along a track length of 415 km. The ridge frequency varied from 0.4 to 10.5 ridges km-1. The mean height of the ridges was found to be about 1.1 m regardless of the ridge frequency. These results are compared to other ridging statistics from the Ross Sea and found to be similar. Comparison with Arctic data, however, indicates that the height and frequency of the ridges are considerably less in the Weddell Sea than in the Arctic. Whereas in the Arctic the mean ridge height tends to increase with the ridge frequency, we found that this was not the case in the Weddell Sea, where the mean ridge height remained constant irrespective of the ridge frequency. Estimates of the contribution of deformed ice to the total ice thickness are generally low except for a single 53-km section where the ridge frequency increased by an order of magnitude. This resulted in an increase in the equivalent mean ice thickness due to ridging from 0.04 m in the less deformed areas to 0.45 m in the highly deformed section. These values were found to be consistent with values obtained from drilled profile lines during the same cruise.

  10. Methodological approach for the evaluation of homologous bone graft use in post-extractive atrophic alveolar ridges

    Directory of Open Access Journals (Sweden)

    B. Musante

    2013-01-01

    Full Text Available The aim of this study is to investigate the in vivo efficacy of Puros® cancellous particulate allograft bone in the regeneration of post-extractive sites. Twelve molar or premolar sites were selected. Seven days after minimally invasive tooth extraction, Puros® cancellous particulate allografts were inserted into the elected sites. TC Cone-Beam investigation and at 4 months from surgery; bone height and width were evaluated. Five months after surgery, biopsy samples of the regenerated sites were taken and histologically analyzed to qualitatively evaluate bone regeneration. TC analysis showed, a mean bone gain of 4.1 mm in height and 2.02 mm in width. The histological analysis of the samples showed intense bone metabolic activity with active osteoblasts on the implant surface, at the level of the native bone-graft interface and in the grafted area. The radiographic and histological analyses demonstrate an optimal bonen regeneration, both in terms of quality and quantity using Puros®.

  11. Lateral trap-door window approach with maxillary sinus membrane lifting for dental implant placement in atrophied edentulous alveolar ridge

    OpenAIRE

    Kao, Shou-Yen; Lui, Man-Tin; Cheng, Dong-Hui; Chen, Ta-Wei

    2015-01-01

    One of the most challenging and technically sensitive surgical procedures in conjunction with dental implant rehabilitation is sinus membrane lifting to increase the bone height or volume from the maxillary sinus floor. This important preprosthetic surgical technique has been available for >15 years, making possible the creation of bone volume in the edentulous posterior maxilla for the placement of dental implants in surgically compromised cases. Substantial literature exists regarding the m...

  12. Lateral trap-door window approach with maxillary sinus membrane lifting for dental implant placement in atrophied edentulous alveolar ridge

    Directory of Open Access Journals (Sweden)

    Shou-Yen Kao

    2015-02-01

    Full Text Available One of the most challenging and technically sensitive surgical procedures in conjunction with dental implant rehabilitation is sinus membrane lifting to increase the bone height or volume from the maxillary sinus floor. This important preprosthetic surgical technique has been available for >15 years, making possible the creation of bone volume in the edentulous posterior maxilla for the placement of dental implants in surgically compromised cases. Substantial literature exists regarding the most efficacious way to increase the predictability of this surgical procedure, and reduce its associated complications. In this article, we describe the regional anatomy of the maxillary sinus, the evolution of the sinus membrane lifting procedure, the current surgical technique, its survival rate and associated complications, the need for bone graft or bone substitutes, and current advances in the lateral approach through a trap-door window for sinus membrane lifting for dental implants.

  13. The use of self-inflating soft tissue expanders prior to bone augmentation of atrophied alveolar ridges.

    Science.gov (United States)

    Mertens, Christian; Thiele, Oliver; Engel, Michael; Seeberger, Robin; Hoffmann, Jürgen; Freier, Kolja

    2015-02-01

    Extensive bone augmentation procedures are frequently performed prior to implant surgery. To achieve tension-free wound closure at the grafted site and thus avoid dehiscence and exposure or total loss of the bone graft, extensive soft tissue mobilization is required. In vitro studies have shown the potential of self-filling osmotic tissue expanders to optimize the amount of resulting soft tissue and vascularization of the recipient site. The purpose of this prospective clinical study was to evaluate the application and complication rate of osmotic hydrogel expanders inserted subperiosteally prior to bone grafting. In this prospective observational study, eight patients were implanted with 11 intraoral osmotic hydrogel expanders prior to bone augmentation procedures. All expanders were placed in subperiosteal positions using the tunnel technique. The occurrence of soft tissue-related complications such as necrosis, perforation, infection, or wound dehiscence leading to expander loss was defined as the primary parameter for analysis and evaluation. Further clinical parameters were soft tissue quality and quantity as well as expansion duration. The expansion time depended upon defect size and expander dimensions. Complications, that is, perforation of the expanders through the oral mucosa, occurred in two patients (3 expanders) who suffered from extreme preoperative scarring in the treated areas owing to prior trauma in one patient and cleft surgery in the other. Patients were grafted with autologous (n = 7) or synthetic (n = 1) block grafts. The expanders were removed during bone grafting surgery. No further dehiscence occurred during the observation period, and all patients were treated successfully with dental implants and subsequent prosthetic reconstruction. Within the limits of this observational clinical study, hydrogel expanders may help to generate additional soft tissue, and they might contribute to the overall improvement of the bone augmentation process by reducing the risk of complications related to the lack of soft tissue. Further randomized controlled studies are necessary. © 2013 Wiley Periodicals, Inc.

  14. Is alveolar cleft reconstruction still controversial? (Review of literature).

    Science.gov (United States)

    Seifeldin, Sameh A

    2016-01-01

    Cleft lip and palate (CL/P) is a frequent congenital malformation that manifests in several varieties including unilateral or bilateral and complete or incomplete. Alveolar cleft reconstruction remains controversial with regard to timing, graft materials, surgical techniques, and methods of evaluation. Many studies have been conducted addressing these points to develop an acceptable universal protocol for managing CL/P. The primary goal of alveolar cleft reconstruction in CL/P patients is to provide a bony bridge at the cleft site that allows maxillary arch continuity, oronasal fistula repair, eruption of the permanent dentition into the newly formed bone, enhances nasal symmetry through providing alar base support, orthodontic movement and placement of osseointegrated implants when indicated. Other goals include improving speech, improvement of periodontal conditions, establishing better oral hygiene, and limiting growth disturbances. In order to rehabilitate oral function in CL/P patients alveolar bone grafting is necessary. Secondary bone grafting is the most widely accepted method for treating alveolar clefts. Autogenous bone graft is the primary source for reconstructing alveolar cleft defects and is currently the preferred grafting material.

  15. Is alveolar cleft reconstruction still controversial? (Review of literature

    Directory of Open Access Journals (Sweden)

    Sameh A. Seifeldin

    2016-01-01

    Full Text Available Cleft lip and palate (CL/P is a frequent congenital malformation that manifests in several varieties including unilateral or bilateral and complete or incomplete. Alveolar cleft reconstruction remains controversial with regard to timing, graft materials, surgical techniques, and methods of evaluation. Many studies have been conducted addressing these points to develop an acceptable universal protocol for managing CL/P. The primary goal of alveolar cleft reconstruction in CL/P patients is to provide a bony bridge at the cleft site that allows maxillary arch continuity, oronasal fistula repair, eruption of the permanent dentition into the newly formed bone, enhances nasal symmetry through providing alar base support, orthodontic movement and placement of osseointegrated implants when indicated. Other goals include improving speech, improvement of periodontal conditions, establishing better oral hygiene, and limiting growth disturbances. In order to rehabilitate oral function in CL/P patients alveolar bone grafting is necessary. Secondary bone grafting is the most widely accepted method for treating alveolar clefts. Autogenous bone graft is the primary source for reconstructing alveolar cleft defects and is currently the preferred grafting material.

  16. Pulpal pathosis and severe alveolar lesions: a clinical study.

    Science.gov (United States)

    Hirsch, R S; Clarke, N G; Srikandi, W

    1989-02-01

    Gingivitis is widely believed to be the precursor of crestal alveolar bone destruction (periodontitis) in some individuals. However, there is no correlation between gingivitis and severe localized lesions of alveolar bone. Specific 'periodontopathogens' of the indigenous oral flora are hypothesized to be the cause of localized lesions but the evidence to date is one of association only. Acute and chronic pulpal inflammation are known causes of irritation to the periodontal ligament and alveolar bone; retrograde pockets may subsequently form. Contamination by indigenous organisms best adapted to the special environment of the deep pocket could be expected to follow the establishment of the new conditions. This study was undertaken to examine the clinical and histological status of the pulps of teeth affected by severe localized alveolar lesions. A total of 153 teeth in 90 subjects were studied; full periodontic and endodontic assessments were made. Seventy-seven teeth responded in the normal range to pulp testing, but 52% of these had no recoverable tissue from their root canal systems on endodontic opening. The findings indicated that pulpal pathosis was not clinically detectable in the majority of teeth studied when conventional endodontic diagnostic tests were applied. Rather, the presence of localized severe alveolar defects was a more accurate predictor of pulpal pathosis.

  17. Preliminary results from the first InRidge cruise to the central Indian Ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Mukhopadhyay, R.; Murthy, K.S.R.; Iyer, S.D.; Rao, M.M.M.; Banerjee, R.; Subrahmanyam, A.S.; Shirodkar, P.V.; Ghose, I.; Ganesan, P.; Rao, A.K.; Suribabu, A.; Ganesh, C.; Naik, G.P.

    stream_size 1 stream_content_type text/plain stream_name Inter_Ridge_News_7_40.pdf.txt stream_source_info Inter_Ridge_News_7_40.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

  18. The Northern Central Indian Ridge: Geology and tectonics of fracture zones-dominated spreading ridge segments

    Digital Repository Service at National Institute of Oceanography (India)

    Drolia, R.K.; Iyer, S.D.; Chakraborty, B; Kodagali, V.N.; Ray, Dwijesh; Misra, S.; Andrade, R.; Sarma, K.V.L.N.S.; Rajasekhar, R.P.; Mukhopadhyay, R.

    . The ridge segments are characterized by along-axis depth variation: deepening at segment ends and shallowing at the centre. Both the ridge axis and TF areas are complex with intra- and inter-segmental morphotectonic and magnetic variations. Basalts collected...

  19. Ridge trace as a boost to ridge regression estimate in the presence ...

    African Journals Online (AJOL)

    Multicollinearity often causes a huge interpretative problem in linear regression analysis. The ridge estimator is not generally accepted as a vital alternative to the ordinary least squares (OLS) estimator because it depends on unknown parameters. In any specific application of ridges regression, there is no guarantee that ...

  20. Significance of localization of mandibular foramen in an inferior alveolar nerve block.

    Science.gov (United States)

    Thangavelu, K; Kannan, R; Kumar, N Senthil; Rethish, E; Sabitha, S; Sayeeganesh, N

    2012-07-01

    The mandibular foramen (MF) is an opening on the internal surface of the ramus for divisions of the mandibular vessels and nerve to pass. The aim of this study is to determine the position of the MF from various anatomical landmarks in several dry adult mandibles. A total of 102 human dry mandibles were examined, of which 93 were of dentulous and 9 were of edentulous. The measurements were taken from the anterior border of the ramus (coronoid notch) to the midportion of the MF and then from the midportion of the MF to the other landmarks such as internal oblique ridge, inferior border, sigmoid notch, and condyle were measured and recorded. The data were compared using Student's t-test. The MF is positioned at a mean distance of 19 mm (with SD 2.34) from coronoid notch of the anterior border of the ramus. Superio-inferiorly from the condyle to the inferior border MF is situated 5 mm inferior to the midpoint of condyle to the inferior border distance (ramus height). We conclude that failures in the anesthesia of the inferior alveolar nerve are due to the operator error and not due to the anatomical variation.

  1. Lithospheric Flexural Modeling of Iapetus' Equatorial Ridge

    Science.gov (United States)

    Zheng, W.; Ip, W.-H.; Teng, L. S.

    2012-04-01

    Iapetus, which is one of Saturn's ball-shaped satellites, has some unique features in the Solar System. This satellite has a mean radius of 735 km, and there is an approximately 20-kilometer-high mountain lying precisely on its equator. The mountain is known as an "equatorial ridge" since it makes Iapetus appear walnut shaped. The origin of the equatorial ridge is attributed to several hypotheses, including different endogenesis and exogenesis processes. In this work, we attempted to construct a flexural model of the equatorial ridge using elastic lithosphere theory. The equatorial ridge is treated as a linear load which exerts uniform force on Iapetus' hard shell (i.e. elastic lithosphere of Iapetus). To calculate the deflection of surface, we use the Digital Terrain Model (DTM) data of Iapetus' leading side published by Giese et al. (2008). Giese et al. also pointed out that the elastic lithospheric thickness of Iapetus must exceed 100 km to support the ridge without deflecting. However, we found possible evidence in the DTM data that implied deflection. There are two sites of surface depression on the northern side of the equatorial ridge. The few-kilometer deflection implies a thinner lithosphere than previous suggested. Assume that the thickness of elastic lithosphere is only 5% below of the radius of Iapetus, so the flat-Earth and one-plate condition could adapt to the flexure model of Iapetus. Based on analysis of the distance between a bulge and the ridge, the calculated lithospheric thickness is 6-10 km. The new result seems controversial, but the modeled surface profile is highly consistent with numerical ridge DTM profile extracted from Giese et al. (2008). Thinner lithosphere also supports the contraction model proposed by Sandwell and Schubert (2010) since the bucking harmonic degree increases. In the other hand, the transformation layer between hard shell and plastic inner core may need constraint on thermal history or crystal form of ice. In

  2. Morfologia alveolar sob a perspectiva da tomografia computadorizada: definindo os limites biológicos para a movimentação dentária Alveolar bone morphology under the perspective of the computed tomography: defining the biological limits of tooth movement

    Directory of Open Access Journals (Sweden)

    Daniela Gamba Garib

    2010-10-01

    Full Text Available INTRODUÇÃO: a tomografia computadorizada (TC permite a visualização do osso alveolar que recobre os dentes por vestibular e lingual. OBJETIVO: o propósito deste estudo foi expor e discutir as implicações da morfologia do osso alveolar, visualizado por meio da TC, sobre o diagnóstico e plano de tratamento ortodôntico. MÉTODOS: foram descritas as evidências sobre a inter-relação entre características dentofaciais e a morfologia das tábuas ósseas vestibular e lingual, assim como evidências sobre a repercussão da movimentação ortodôntica sobre o nível e espessura dessas estruturas periodontais. RESULTADOS: pacientes adultos podem apresentar deiscências ósseas previamente ao tratamento ortodôntico, principalmente na região dos incisivos inferiores. Os pacientes com padrão de crescimento vertical parecem apresentar menor espessura das tábuas ósseas vestibular e lingual no nível do ápice dos dentes permanentes, comparados a pacientes com padrão de crescimento horizontal. O movimento dentário vestibulolingual descentraliza os dentes do rebordo alveolar e ocasiona deiscências ósseas. CONCLUSÃO: a morfologia do rebordo alveolar constitui um fator limitante para a movimentação dentária e deve ser considerada, de forma individual, na realização do plano de tratamento ortodôntico.INTRODUCTION: Computed tomography (CT permits the visualization of the labial/buccal and lingual alveolar bone. OBJECTIVES: This study aimed at reporting and discussing the implications of alveolar bone morphology, visualized by means of CT, on the diagnosis and orthodontic treatment plan. METHODS: Evidences of the interrelationship between dentofacial features and labial/buccal and lingual alveolar bone morphology, as well as the evidences of the effects of the orthodontic movement on the thickness and level of these periodontal structures were described. RESULTS: Adult patients may present bone dehiscences previously to orthodontic

  3. Inflammatory responses induce an identity crisis of alveolar macrophages, leading to pulmonary alveolar proteinosis.

    Science.gov (United States)

    Ebina-Shibuya, Risa; Matsumoto, Mitsuyo; Kuwahara, Makoto; Jang, Kyoung-Jin; Sugai, Manabu; Ito, Yoshiaki; Funayama, Ryo; Nakayama, Keiko; Sato, Yuki; Ishii, Naoto; Okamura, Yasunobu; Kinoshita, Kengo; Kometani, Kohei; Kurosaki, Tomohiro; Muto, Akihiko; Ichinose, Masakazu; Yamashita, Masakatsu; Igarashi, Kazuhiko

    2017-11-03

    Pulmonary alveolar proteinosis (PAP) is a severe respiratory disease characterized by dyspnea caused by accumulation of surfactant protein. Dysfunction of alveolar macrophages (AMs), which regulate the homeostasis of surfactant protein, leads to the development of PAP; for example, in mice lacking BTB and CNC homology 2 (Bach2). However, how Bach2 helps prevent PAP is unknown, and the cell-specific effects of Bach2 are undefined. Using mice lacking Bach2 in specific cell types, we found that the PAP phenotype of Bach2-deficient mice is due to Bach2 deficiency in more than two types of immune cells. Depletion of hyperactivated T cells in Bach2-deficient mice restored normal function of AMs and ameliorated PAP. We also found that, in Bach2-deficient mice, hyperactivated T cells induced gene expression patterns that are specific to other tissue-resident macrophages and dendritic cells. Moreover, Bach2-deficient AMs exhibited a reduction in cell cycle progression. IFN-γ released from T cells induced Bach2 expression in AMs, in which Bach2 then bound to regulatory regions of inflammation-associated genes in myeloid cells. Of note, in AMs, Bach2 restricted aberrant responses to excessive T cell-induced inflammation, whereas, in T cells, Bach2 puts a brake on T cell activation. Moreover, Bach2 stimulated the expression of multiple histone genes in AMs, suggesting a role of Bach2 in proper histone expression. We conclude that Bach2 is critical for the maintenance of AM identity and self-renewal in inflammatory environments. Treatments targeting T cells may offer new therapeutic strategies for managing secondary PAP. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  4. Remedial Investigation Work Plan for Chestnut Ridge Operable Unit 1 (Chestnut Ridge Security Pits) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This document outlines the activities necessary to conduct a Remedial Investigation (RI) of the Chestnut Ridge Security Pits (CRSP) at the Oak Ridge Y-12 Plant. The CRSP, also designated Chestnut Ridge Operable Unit (OU) 1, is one of four OUs along Chestnut Ridge on the Oak Ridge Reservation (ORR). The purpose of the RI is to collect data to (1) evaluate the nature and extent of known and suspected contaminants, (2) support an Ecological Risk Assessment (ERA) and a Human Health Risk Assessment (HHRA), (3) support the feasibility study in the development and analysis of remedial alternatives, and (4) ultimately, develop a Record of Decision (ROD) for the site. This chapter summarizes the regulatory background of environmental investigation on the ORR and the approach currently being followed and provides an overview of the RI to be conducted at the CRSP. Subsequent chapters provide details on site history, sampling activities, procedures and methods, quality assurance (QA), health and safety, and waste management related to the RI.

  5. Diffuse bronchiolo-alveolar carcinoma in a dog.

    Science.gov (United States)

    Bertazzolo, W; Zuliani, D; Pogliani, E; Caniatti, M; Bussadori, C

    2002-06-01

    An eight-year-old female German wirehaired pointer was presented with signs of respiratory distress. Clinical examination, laboratory results, thoracic radiography and echocardiography indicated the presence of a diffuse interstitial lung disease with secondary appropriate erythrocytosis, pulmonary hypertension and cor pulmonale. Transthoracic fine needle aspiration biopsy of the lung suggested malignant epithelial neoplasia. A primary lung cancer with an unusually diffuse distribution of miliary/micronodular lesions was found at postmortem examination. Histological diagnosis was bronchiolo-alveolar carcinoma. Bronchiolo-alveolar carcinoma can occasionally occur in a diffuse fashion involving most or all of the lung parenchyma. In man, diffuse bronchiolo-alveolar carcinoma is considered a great imitator of other, more common diffuse interstitial forms of lung disease. This case report indicates that it is also a differential diagnosis to consider in dogs.

  6. Traumatic neuroma of the inferior alveolar nerve: a case report.

    Science.gov (United States)

    Arribas-García, Ignacio; Alcalá-Galiano, Andrea; Gutiérrez, Ramón; Montalvo-Moreno, Juan José

    2008-03-01

    Traumatic neuromas are rare entities which characteristically arise subsequently to surgery and are usually accompanied by pain, typically neuralgic. We present an unusual case of an intraosseous traumatic neuroma of the inferior alveolar nerve following tooth extraction. A 56-year-old man consulted for paresthesias and hyperesthesia in the left mandibular region following extraction of the left mandibular third molar (#38). The panoramic radiograph revealed a radiolucent lesion in the inferior alveolar nerve canal, and CT demonstrated the existence of a mass within the canal, producing widening of the same. Nerve-sparing excisional biopsy was performed. Histopathology and immunohistochemistry were consistent with traumatic neuroma of the left inferior alveolar nerve. After 3 years of follow-up, the patient is asymptomatic and there are no signs of recurrence.

  7. CT staging of alveolar echinococcosis of the liver

    Energy Technology Data Exchange (ETDEWEB)

    Rozanes, I. [Dept. of Radiology, Istanbul Medical Faculty (Turkey); Acunas, B. [Dept. of Radiology, Istanbul Medical Faculty (Turkey); Emre, A. [Hepatobiliary Surgery Unit, Dept. of General Surgery, Istanbul Medical Faculty (Turkey); Alper, A. [Hepatobiliary Surgery Unit, Dept. of General Surgery, Istanbul Medical Faculty (Turkey); Sayi, I. [Dept. of Radiology, Istanbul Medical Faculty (Turkey); Minareci, Oe. [Dept. of Radiology, Istanbul Medical Faculty (Turkey); Acarli, K. [Hepatobiliary Surgery Unit, Dept. of General Surgery, Istanbul Medical Faculty (Turkey); Hazar, H. [Hepatobiliary Surgery Unit, Dept. of General Surgery, Istanbul Medical Faculty (Turkey); Ariogul, O. [Hepatobiliary Surgery Unit, Dept. of General Surgery, Istanbul Medical Faculty (Turkey)

    1995-11-01

    The purpose of this study was to assess the usefulness of a new staging scheme for alveolar echinococcosis of the liver. A total of 28 patients with hepatic alveolar echinococcosis underwent CT examinations and were staged according to the proposed staging scheme (stage 1: lesion measuring less than 3 cm in diameter; stage 2: lesion greater than 3 cm, confined to less than three hepatic segments; stage 3a: lesion with invasion of more than three hepatic segments; stage 3b: invasion of liver hilum or suprahepatic vena cava; stage 4: invasion of surrounding organs and/or distant metastasis). Of the patients 16 underwent laparotomy, and results of the radiologic staging were correlated with surgical data. The CT findings correlated well with surgical findings. Patients were followed-up for a period of 6 months to 7 years. We concluded that the proposed staging scheme seemed to be useful for the therapeutic planning of patients with alveolar echinococcosis of the liver. (orig.)

  8. Histological and morphometric aspects of ridge preservation with a moldable, in situ hardening bone graft substitute

    Directory of Open Access Journals (Sweden)

    Jurišić M.

    2013-01-01

    Full Text Available Biphasic calcium phosphates (BCP are widely used in alveolar ridge regeneration as a porous scaffold for new bone formation. The aim of this case series was to evaluate the regenerative effect of the combination of BCP and polylactide-co-glycolide (PLGA which can serve as a barrier membrane during bone regeneration. The study included five patients. Four months into the healing period, bone samples were collected for histological and morphometric analyses. The results of morphometric analysis showed that newly formed bone represented 32.2 ± 6.8% of the tissue, 31.9 ± 8.9% was occupied by residual graft and 35.9 ± 13.5% by soft tissue. Active osteogenesis was seen around the particles of the graft. The particles were occupied mostly by immature woven bone and connective tissue. The quality and quantity of newly formed bone, after the use of BCP/PLGA for ridge preservation, can be adequate for successful implant therapy after tooth extraction. [Projekat Ministarstva nauke Republike Srbije, br. OI 175021 i br. OI 173009

  9. Foxc2 influences alveolar epithelial cell differentiation during lung development.

    Science.gov (United States)

    Tsuji, Mayoko; Morishima, Masae; Shimizu, Kazuhiko; Morikawa, Shunichi; Heglind, Mikael; Enerbäck, Sven; Ezaki, Taichi; Tamaoki, Jun

    2017-08-01

    FOXC2, a forkhead transcriptional factor, is a candidate gene for congenital heart diseases and lymphedema-distichiasis syndrome and yellow nail syndrome; however, there are no reports on Foxc2 and the development of the lung. We have identified lung abnormalities in Foxc2-knockout embryos during investigation of cardiac development. The aim of this study was to clarify the morphological characteristics during lung development using ICR-Foxc2 knockout lungs. Mutant fetuses at embryonic days 10.5-18.5 were obtained from mating of Foxc2+/- mice and then analyzed. Notably, Foxc2-knockout lungs appeared parenchymatous and much smaller than those of the wild-type littermates. In the Foxc2 knockout lungs, the capillary beds remained distant from the alveolar epithelium until the late stages, the number of type2 alveolar cells per alveolar progenitor cell was lower and the type1 alveolar cells were thicker in Foxc2 knockout mice. In contrast, Foxc2 expression was only detected in the mesenchyme of the lung buds at E10.5, and it disappeared at E11.5 in Foxc2-LacZ knockin mice. Furthermore, the expression of Lef1 was significantly inhibited in E11.5 lungs. All of these results suggest that the abnormalities in Foxc2 knockout mice may involve maldifferentiation of alveolar epithelial cells and capillary vessel endothelial-alveolar epithelial approach as well as lymph vessel malformation. This is the first report about relationship between Foxc2 and lung development. This animal model might provide an important clue for elucidating the mechanism of lung development and the cause of respiratory diseases. © 2017 Japanese Society of Developmental Biologists.

  10. Alveolar hemorrhage as the initial presentation of systemic lupus erythematosus.

    Science.gov (United States)

    de Holanda, Bruna A; Barreto, Isabela G Menna; de Araujo, Isadora S Gomes; de Araujo, Daniel B

    2016-01-01

    Alveolar hemorrhage (AH) is a rare syndrome that can often occur in autoimmune diseases, blood clotting disorders, infection or by acute inhalation injury, presenting rapid evolution and high mortality, especially with late diagnosis and treatment. Among the autoimmune diseases, there are reported cases in patients with primary antiphospholipid syndrome (PAPS), vasculitis and systemic lupus erythematosus (SLE). An early diagnosis is an essential tool in the successful management of this complication, requiring aggressive treatment based on vigorous immunosuppression and broad-spectrum antibiotic. We describe here a case of alveolar hemorrhage associated with glomerulonephritis as the open presentation in a patient with SLE.

  11. Alveolar soft part sarcoma of the retro peritoneum

    Directory of Open Access Journals (Sweden)

    Xin Fan

    2010-01-01

    Full Text Available Alveolar Soft Part Sarcoma (ASPS, also called Alveolar Soft-Tissue Sarcoma, is a rare type of soft-tissue neoplasm with a poor long term prognosis. Such tumors originating in the retro peritoneal space are extremely rare. In this article we discuss a 34-year-old woman who was referred to our hospital with an increasing mass in her left lower abdomen. Ultrasonography and conventional Computed Tomography revealed a large hard mass occupying the left retroperitoneal space with a clear border. The pathological diagnosis was ASPS.

  12. Physiography of eastern Mendocino Ridge, NE Pacific

    Science.gov (United States)

    Gardner, J. V.; Malik, M. A.; Verplank, N. S.

    2009-12-01

    The bathymetry of the eastern 850 km of Mendocino Ridge (MR) was mapped using NOAA Ship Okeanos Explorer’s Kongsberg EM302 multibeam as part of mapping trials to support the University of New Hampshire’s U.S. Law of the Sea mapping program. The ridge was mapped from the margin to ~500 km west of the intersection of the ridge with Gorda Ridge (GR) at a spatial resolution of 40 m/sounding. The mapped section can be subdivided into two morphologic styles. East of the GR intersection, along the transform fault, MR is a single 4-18 km wide ridge with summit depths of 1200 to 1700 m deep with slopes of 10-40°. West of the intersection, along the fracture zone, MR has summit depths of >2100 m deep. A series of drag folds formed by basement ridges west of GR and north of the fracture zone reflects the differential spreading rates of GR. The almost 90° bend in the drag folds is often accompanied by large volcanic fields with summit craters in many volcanoes in water depths of 2 to 4 km. Beginning ~45 km west of GR intersection, MR evolves into a series of en echelon ridges striking 290°, some with slopes as steep as 55°. The change in morphology appears to be the effects of compression in the transform fault section between the Gorda Plate to the north and the Pacific Plate to the south, whereas extension is evident in the fracture zone section of the ridge. Mendocino Channel immediately to the north of the easternmost MR was mapped from the margin to ~105 km to the west before the channel relief was below the resolution of the multibeam system. The channel walls have as much as 50 m of relief with decreasing relief down channel. Mendocino Channel is bordered on the north by a large field of levees with bedforms and on the south by the 1200 m high wall of MR. Several large sediment failures have occurred in the levee field. The channel is straight for the first 40+ km with an average channel slope of 0.7° but suddenly begins to meander when the channel slope is

  13. Secondary bone grafting for alveolar cleft in children with cleft lip or cleft lip and palate

    NARCIS (Netherlands)

    Guo, J.; Li, C.; Zhang, Q.; Wu, G.; Deacon, S.A.; Chen, J.; Hu, H.; Zou, S.; Ye, Q.

    2011-01-01

    BACKGROUND: Secondary alveolar bone grafting has been widely used to reconstruct alveolar cleft. However, there is still some controversy. OBJECTIVES: To compare the effectiveness and safety of different secondary bone grafting methods. SEARCH STRATEGY: The final electronic and handsearches were

  14. Reconstruction of alveolar defects in patients with cleft lip and palate - 111 consecutive patients

    DEFF Research Database (Denmark)

    Andersen, Kristian

    2012-01-01

    Reconstruction of alveolar defects in patients with cleft lip and palate - 111 consecutive patients......Reconstruction of alveolar defects in patients with cleft lip and palate - 111 consecutive patients...

  15. DMPD: Silica binding and toxicity in alveolar macrophages. [Dynamic Macrophage Pathway CSML Database

    Lifescience Database Archive (English)

    Full Text Available 18226603 Silica binding and toxicity in alveolar macrophages. Hamilton RF Jr, Thaku...l) Show Silica binding and toxicity in alveolar macrophages. PubmedID 18226603 Title Silica binding and toxic

  16. AMPLITUDES OF DISJUNCTIVE DISLOCATIONS IN THE KNIPOVICH RIDGE FLANKS (NORTHERN ATLANTIC AS AN INDICATOR OF MODERN REGIONAL GEODYNAMICS

    Directory of Open Access Journals (Sweden)

    S. Yu. Sokolov

    2017-01-01

    Full Text Available This article presents the first map showing the vertical amplitudes of modern disjunctive dislocations inNorthern Atlantic, based on the estimated phase shifts of reflected waves recorded by high-frequency seismic acoustic surveys. The amplitude distribution pattern is mosaic with alternating areas of compression and extension in the flanks of the Knipovich rift system. The modern structure of the Knipovich Ridge, including two strike-slip faults, represents a local rift in the pull-apart setting. The asymmetry of stresses and the presence of compression in the ridge flanks is evidenced by the distribution of the focal mechanisms of strong earthquakes related to reverse faults. In the southeastern Knipovich Ridge, tectonic activity is marked by the asymmetric pattern of the epicenters of small earthquakes.

  17. Mesial and distal alveolar bone morphology in maxillary canines moved into the grafted alveolar cleft: Computed tomography evaluation.

    Science.gov (United States)

    Garib, Daniela; Massaro, Camila; Yatabe, Marilia; Janson, Guilherme; Lauris, José Roberto P

    2017-05-01

    The aims of this study were to qualitatively assess the mesial and distal alveolar bone of maxillary canines mesially moved to replace absent lateral incisors in patients with unilateral cleft lip and palate after secondary alveolar bone graft and to assess the reproducibility of the proposed cone-beam computed tomography (CBCT) method. The sample comprised CBCT examinations of 30 patients with unilateral cleft lip and palate from 1 center. CBCT images were taken at least 6 months after comprehensive orthodontic treatment. The noncleft side was used as the control group. Using axial sections, scores from 0 to 4 (bone absence to complete bone filling, respectively) were given to the mesial and distal alveolar bones of the maxillary canines. Interexaminer and intraexaminer reproducibility was assessed using kappa statistics. Intergroup comparisons were performed using Wilcoxon tests. Interexaminer and intraexaminer agreement was excellent. Intergroup comparison identified smaller scores at the cervical and middle root levels of the cleft side mesial alveolar bone of the maxillary canines. At the cleft side, 85 mesial sites showed favorable scores (3 or 4); 1 had a score of 1, and 4 had scores of 2. At the distal surface, 78 sites were evaluated, and only 1 site received a score of 1. The noncleft side had scores of 4 for all sites. The new CBCT scale showed good reproducibility. CBCT axial sections are reliable for a qualitative appraisal of alveolar bone in a grafted alveolar cleft. Mesial bone defects can be observed in maxillary canines moved into grafted areas after comprehensive orthodontic treatment, especially at the cervical root half. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  18. Segment-Scale Melt Extraction at Mid-Ocean Ridges: A Play in Three Acts

    Science.gov (United States)

    Montesi, L. G.; Hebert, L. B.; Behn, M. D.

    2011-12-01

    At mid-ocean ridges, the lithosphere is created through a combination of melt extraction, metasomatism, and cooling, and the oceanic crust forms as melt collects near the surface. As the presence of melt also has rheological and geochemical consequences, a better understanding of the mechanisms that control melt migration and extraction at mid-ocean ridges is necessary to constrain the processes that form oceanic lithosphere and plate boundaries. Melt migration is described rigorously by two-phase transport equations in porous or fractured media. However, scaling considerations and geological constraints typically lead to certain simplifications when incorporated into geodynamical models. It is possible to capture the essence of melt migration and extraction by considering three principal stages: Stage 1. Vertical migration: Melt is generated by adiabatic decompression and rises nearly vertically from the zone of melt production to a melt-impermeable boundary, or permeability barrier, at the base of the thermal lithosphere. Stage 2. Focusing: Melt travels along a permeability barrier. The barrier is associated with a crystallization front and is slightly inclined toward the ridge axis following the thermal structure of the plate. At this stage melt focusing occurs toward and along the strike of the ridge. Stage 3. Extraction: Melt enters a melt extraction zone (MEZ) and is extracted to the surface. The MEZ represents the combined effect of faults and/or dikes that promote rapid lateral and vertical melt migration and eventual eruption on the seafloor. Stage 1 is expected based on scaling arguments of buoyancy and permeability [e.g., Zhu et al., Science, 2011]. Stages 2 and 3 are directly influenced by the structure of the lithosphere, which is itself controlled by the segmentation of the ridge axis, spreading rate, and mantle potential temperature. Thus, it is possible to use along-strike variations in melt delivery in well-studied geological settings to constrain

  19. Normalization Ridge Regression in Practice I: Comparisons Between Ordinary Least Squares, Ridge Regression and Normalization Ridge Regression.

    Science.gov (United States)

    Bulcock, J. W.

    The problem of model estimation when the data are collinear was examined. Though the ridge regression (RR) outperforms ordinary least squares (OLS) regression in the presence of acute multicollinearity, it is not a problem free technique for reducing the variance of the estimates. It is a stochastic procedure when it should be nonstochastic and it…

  20. Diel vertical migrat..

    African Journals Online (AJOL)

    2002-01-24

    Jan 24, 2002 ... crustacean zooplankton but also in a Wide array of different marine zooplankton groups. (Russell 1927, McLaren 1963). Thus there is no doubt that ..... cooperation during field work and for their fruitful discussion on the draft manuscript. REFERENCES. Bayly lAE 1986 Aspects of diel vertical migration in ...

  1. Vertical market participation

    DEFF Research Database (Denmark)

    Schrader, Alexander; Martin, Stephen

    1998-01-01

    Firms that operate at both levels of vertically related Cournot oligopolies will purchase some input supplies from independent rivals, even though they can produce the good at a lower cost, driving up input price for nonintegrated firms at the final good level. Foreclosure, which avoids this stra...... this strategic behavior, yields better market performance than Cournot beliefs...

  2. Hunting Voronoi vertices

    NARCIS (Netherlands)

    Ferrucci, V.; Overmars, Mark; Rao, A.; Vleugels, J.

    1994-01-01

    Given three objects in the plane, a Voronoi vertex is a point that is equidistant simultaneously from each. In this paper, we consider the problem of computing Voronoi vertices for planar objects of xed but possibly unknown shape; we only require the ability to query the closest point on an object

  3. Vertical shaft windmill

    Science.gov (United States)

    Grana, D. C.; Inge, S. V., Jr. (Inventor)

    1983-01-01

    A vertical shaft has several equally spaced blades mounted. Each blade consists of an inboard section and an outboard section skew hinged to the inboard section. The inboard sections automatically adjust their positions with respect to the fixed inboard sections with changes in velocity of the wind. This windmill design automatically governs the maximum rotational speed of shaft.

  4. Ridge regression estimator: combining unbiased and ordinary ridge regression methods of estimation

    Directory of Open Access Journals (Sweden)

    Sharad Damodar Gore

    2009-10-01

    Full Text Available Statistical literature has several methods for coping with multicollinearity. This paper introduces a new shrinkage estimator, called modified unbiased ridge (MUR. This estimator is obtained from unbiased ridge regression (URR in the same way that ordinary ridge regression (ORR is obtained from ordinary least squares (OLS. Properties of MUR are derived. Results on its matrix mean squared error (MMSE are obtained. MUR is compared with ORR and URR in terms of MMSE. These results are illustrated with an example based on data generated by Hoerl and Kennard (1975.

  5. Serial bronchoscopic lung lavage in pulmonary alveolar proteinosis under local anesthesia

    Directory of Open Access Journals (Sweden)

    K Rennis Davis

    2015-01-01

    Full Text Available Pulmonary alveolar proteinosis (PAP is a rare disease, characterized by alveolar accumulation of surfactant composed of proteins and lipids due to defective surfactant clearance by alveolar macrophages. Mainstay of treatment is whole lung lavage, which requires general anesthesia. Herein, we report a case of primary PAP, successfully treated with serial bronchoscopic lung lavages under local anesthesia.

  6. Vertical gastroplasty: evolution of vertical banded gastroplasty.

    Science.gov (United States)

    Mason, E E; Doherty, C; Cullen, J J; Scott, D; Rodriguez, E M; Maher, J W

    1998-09-01

    The objective of this paper is to summarize the goals, technical requirements, advantages, and potential risks of gastroplasty for treatment of severe obesity. Gastroplasty is preferred to more complex operations, as it preserves normal digestion and absorption and avoids complications that are peculiar to exclusion operations. The medical literature and a 30-year experience at the University of Iowa Hospitals and Clinics (UIHC) provides an overview of vertical banded gastroplasty (VBG) evolution. Preliminary 10-year results with the VBG technique currently used at UIHC are included. At UIHC the VBG is preferred to other gastroplasties because it provides weight control that extends for at least 10 years and the required objective, intraoperative quality control required for a low rate of reoperation. It is recommended that modifications of the operative technique not be attempted until a surgeon has had experience with the standardized operation--and then only under a carefully designed protocol. Realistic goals for surgery and criteria of success influence the choice of operation and the optimum, lifelong risk/benefit ratio. In conclusion, VBG is a safe, long-term effective operation for severe obesity with advantages over complex operations and more restrictive simple operations.

  7. Multi-millennial record of erosion and fires in the southern Blue Ridge Mountains, USA In: Greenberg, CH and BS Collins (eds.)

    Science.gov (United States)

    David S. Leigh

    2016-01-01

    Bottomland sediments from the southern Blue Ridge Mountains provide a coarse-resolution, multi-millennial stratigraphic record of past regional forest disturbance (soil erosion). This record is represented by 12 separate vertical accretion stratigraphic profi les that have been dated by radiocarbon, luminescence, cesium-137, and correlation methods...

  8. Hyperpolarized Xe MR imaging of alveolar gas uptake in humans.

    Directory of Open Access Journals (Sweden)

    Zackary I Cleveland

    Full Text Available BACKGROUND: One of the central physiological functions of the lungs is to transfer inhaled gases from the alveoli to pulmonary capillary blood. However, current measures of alveolar gas uptake provide only global information and thus lack the sensitivity and specificity needed to account for regional variations in gas exchange. METHODS AND PRINCIPAL FINDINGS: Here we exploit the solubility, high magnetic resonance (MR signal intensity, and large chemical shift of hyperpolarized (HP (129Xe to probe the regional uptake of alveolar gases by directly imaging HP (129Xe dissolved in the gas exchange tissues and pulmonary capillary blood of human subjects. The resulting single breath-hold, three-dimensional MR images are optimized using millisecond repetition times and high flip angle radio-frequency pulses, because the dissolved HP (129Xe magnetization is rapidly replenished by diffusive exchange with alveolar (129Xe. The dissolved HP (129Xe MR images display significant, directional heterogeneity, with increased signal intensity observed from the gravity-dependent portions of the lungs. CONCLUSIONS: The features observed in dissolved-phase (129Xe MR images are consistent with gravity-dependent lung deformation, which produces increased ventilation, reduced alveolar size (i.e., higher surface-to-volume ratios, higher tissue densities, and increased perfusion in the dependent portions of the lungs. Thus, these results suggest that dissolved HP (129Xe imaging reports on pulmonary function at a fundamental level.

  9. The development and plasticity of alveolar type 1 cells

    Science.gov (United States)

    Yang, Jun; Hernandez, Belinda J.; Martinez Alanis, Denise; Narvaez del Pilar, Odemaris; Vila-Ellis, Lisandra; Akiyama, Haruhiko; Evans, Scott E.; Ostrin, Edwin J.; Chen, Jichao

    2016-01-01

    Alveolar type 1 (AT1) cells cover >95% of the gas exchange surface and are extremely thin to facilitate passive gas diffusion. The development of these highly specialized cells and its coordination with the formation of the honeycomb-like alveolar structure are poorly understood. Using new marker-based stereology and single-cell imaging methods, we show that AT1 cells in the mouse lung form expansive thin cellular extensions via a non-proliferative two-step process while retaining cellular plasticity. In the flattening step, AT1 cells undergo molecular specification and remodel cell junctions while remaining connected to their epithelial neighbors. In the folding step, AT1 cells increase in size by more than 10-fold and undergo cellular morphogenesis that matches capillary and secondary septa formation, resulting in a single AT1 cell spanning multiple alveoli. Furthermore, AT1 cells are an unexpected source of VEGFA and their normal development is required for alveolar angiogenesis. Notably, a majority of AT1 cells proliferate upon ectopic SOX2 expression and undergo stage-dependent cell fate reprogramming. These results provide evidence that AT1 cells have both structural and signaling roles in alveolar maturation and can exit their terminally differentiated non-proliferative state. Our findings suggest that AT1 cells might be a new target in the pathogenesis and treatment of lung diseases associated with premature birth. PMID:26586225

  10. Alveolar Osteitis: Patients' compliance to post-extraction instructions ...

    African Journals Online (AJOL)

    Background: To evaluate the effect of various combination of post-extraction regimen administered to patients who had intra-alveolar molar tooth extraction. Patients and Methods: One year prospective study involving 76 consenting patients who came for 1-week post-extraction review. The patients were placed on warm ...

  11. GBP6 : differential expression in pulmonary alveolar macrophages ...

    African Journals Online (AJOL)

    GBP6 : differential expression in pulmonary alveolar macrophages under PRRSV infection and association with blood parameters of its missense mutation. ... If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

  12. GBP6: differential expression in pulmonary alveolar macrophages ...

    African Journals Online (AJOL)

    Adeyinka A.A

    2017-08-14

    Aug 14, 2017 ... In the current study, RT-PCR assay revealed that the GBP6 gene was widely distributed ... We validated and analyzed the polymorphism of a missense mutation .... Data were subjected to statistical analysis using GraphPad Prism 5 software (Motulsky, ..... Comparison of porcine alveolar macrophages and.

  13. Stretch induces cytokine release by alveolar epithelial cells in vitro.

    Science.gov (United States)

    Vlahakis, N E; Schroeder, M A; Limper, A H; Hubmayr, R D

    1999-07-01

    Mechanical ventilation can injure the lung, causing edema and alveolar inflammation. Interleukin-8 (IL-8) plays an important role in this inflammatory response. We postulated that cyclic cell stretch upregulates the production and release of IL-8 by human alveolar epithelium in the absence of structural cell damage or paracrine stimulation. To test this hypothesis, alveolar epithelial cells (A549 cells) were cultured on a deformable silicoelastic membrane. When stretched by 30% for up to 48 h, the cells released 49 +/- 34% more IL-8 (P static controls. Smaller deformations (20% stretch) produced no consistent increase in IL-8. Stretch of 4 h duration increased IL-8 gene transcription fourfold above baseline. Stretch had no effect on cell proliferation, cell viability as assessed by (51)Cr release assay, or the release of granulocyte-macrophage colony-stimulating factor and tumor necrosis factor-alpha. We conclude that deformation per se can trigger inflammatory signaling and that alveolar epithelial cells may be active participants in the alveolitis associated with ventilator-induced lung injury.

  14. Pathogenetics of alveolar capillary dysplasia with misalignment of pulmonary veins

    NARCIS (Netherlands)

    Szafranski, P.; Gambin, T.; Dharmadhikari, A.V.; Akdemir, K.C.; Jhangiani, S.N.; Schuette, J.; Godiwala, N.; Yatsenko, S.A.; Sebastian, J.; Madan-Khetarpal, S.; Surti, U.; Abellar, R.G.; Bateman, D.A.; Wilson, A.L.; Markham, M.H.; Slamon, J.; Santos-Simarro, F.; Palomares, M.; Nevado, J.; Lapunzina, P.; Chung, B.H.; Wong, W.L.; Chu, Y.W.; Mok, G.T.; Kerem, E.; Reiter, J.; Ambalavanan, N.; Anderson, S.A.; Kelly, D.R.; Shieh, J.; Rosenthal, T.C.; Scheible, K.; Steiner, L.; Iqbal, M.A.; McKinnon, M.L.; Hamilton, S.J.; Schlade-Bartusiak, K.; English, D.; Hendson, G.; Roeder, E.R.; DeNapoli, T.S.; Littlejohn, R.O.; Wolff, D.J.; Wagner, C.L.; Yeung, A.; Francis, D.; Fiorino, E.K.; Edelman, M.; Fox, J.; Hayes, D.A.; Janssens, S.; Baere, E. De; Menten, B.; Loccufier, A.; Vanwalleghem, L.; Moerman, P.; Sznajer, Y.; Lay, A.S.; Kussmann, J.L.; Chawla, J.; Payton, D.J.; Phillips, G.E.; Brosens, E.; Tibboel, D.; Klein, A.; Maystadt, I.; Fisher, R.; Sebire, N.; Male, A.; Chopra, M.; Pinner, J.; Malcolm, G.; Peters, G.; Arbuckle, S.; Lees, M.; Mead, Z.; Quarrell, O.; Sayers, R.; Owens, M.; Shaw-Smith, C.; Lioy, J.; McKay, E.; Leeuw, N. de; Feenstra, I.; Spruijt, L.; Elmslie, F.; Thiruchelvam, T.; Bacino, C.A.; Langston, C.; Lupski, J.R.; Sen, P.; Popek, E.; Stankiewicz, P.

    2016-01-01

    Alveolar capillary dysplasia with misalignment of pulmonary veins (ACDMPV) is a lethal lung developmental disorder caused by heterozygous point mutations or genomic deletion copy-number variants (CNVs) of FOXF1 or its upstream enhancer involving fetal lung-expressed long noncoding RNA genes

  15. Modulation of epithelial sodium channel in human alveolar epithelial ...

    African Journals Online (AJOL)

    Purpose: To investigate the effect of lipoxin A4 (LXA4) on the expressions of protein and mRNA of alveolar epithelial sodium channel (ENaC) in normal and lipopolysaccharide (LPS)-stimulated A549 cells. Methods: A549 cell-lines were randomized into 11 groups (N = 8) and treated. EnaC level was evaluated by Western ...

  16. The Effect of Astragalus Extractive on Alveolar Bone Rebuilding ...

    African Journals Online (AJOL)

    At the same time TNF-β in PMO group was significantly higher than the other two groups. Moreover AE group had no significant differences with the control group in all data at the observing period. Conclusion: AE has positive effect on alveolar bone rebuilding progress of tooth extracted socket of PMO rats. AE also has the ...

  17. Abnormal gallium scintigraphy in pulmonary alveolar proteinosis (PAP)

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, S.D.; White, D.A.; Stover-Pepe, D.E.; Caravelli, J.F.; Van Uitert, C.; Benua, R.S.

    1987-04-01

    A patient with medulloblastoma of the cerebellum developed dyspnea and hypoxemia. Pulmonary function tests showed decreased lung volume and diffusing capacity, while the chest radiographs initially showed only mild interstitial infiltrates. Repeated gallium scans showed diffuse lung uptake and diagnosis of pulmonary alveolar proteinosis was made by open lung biopsy.

  18. Tidal volume and alveolar clearance of insoluble particles.

    Science.gov (United States)

    John, J; Wollmer, P; Dahlbäck, M; Luts, A; Jonson, B

    1994-02-01

    We studied the effect of 3 h of large tidal volume ventilation on alveolar clearance of 0.63-micron fluorescent latex particles in rabbits during pentobarbital anesthesia. After particle deposition, six animals were killed as controls, six were subjected to large tidal volume ventilation with a peak pressure of 27 cmH2O, and six were subjected to conventional ventilation with a peak pressure of 11 cmH2O. Mean tidal volumes were 30.2 +/- 6.1 and 8.4 +/- 1.6 ml/kg in the large tidal volume and conventional groups, respectively. End-expiratory pressure was 2 cmH2O in all groups. Compliance decreased only after large tidal ventilation (P = 0.0036). Compared with controls the conventional ventilation group showed no alveolar clearance, but more particles were clustered within macrophages (P = 0.01). Compared with other groups the large tidal volume group had fewer alveolar particles (P = 0.0005), most of which were single particles. Accordingly, large tidal volumes enhance alveolar particle clearance, which is possibly related to distension-related evacuation of surfactant to proximal airways. Clearance may be due to accelerated motion of the particle-loaded macrophage in response to the fast film motion. Alternatively, single particles embedded in the surfactant film may be dragged by the fast-moving film toward the airways.

  19. Prevention of alveolar osteitis after third molar surgery: Comparative ...

    African Journals Online (AJOL)

    Patients and Methods: Apparently healthy patients who were referred to the Oral Surgery Clinic of our institution, with an indication for surgical extraction of lower third ... Information on demographic, types and level of impaction, indications for extraction, and development of alveolar osteitis were obtained and analyzed.

  20. Alveolar rhabdomyosarcoma: origin and prognostic implications of molecular findings

    Directory of Open Access Journals (Sweden)

    Pilar Eguía-Aguilar

    2016-11-01

    The aggressive behavior of alveolar rhabdomyosarcoma has been associated with the expression of oncogenic fusion proteins resulting from chromosomal translocations, particularly t(2;13 (q35;q14 PAX3/FOXO1, and t(1;13 (p36;q14 PAX7/FOXO1 which were present in this patient.

  1. Mid-oceanic ridges - Guest editorial

    Digital Repository Service at National Institute of Oceanography (India)

    Banerjee, R.; Iyer, S.D.

    Ins titutes of Techno logy and national laboratories. A few Inter national re - searchers, notably from the USA, Portugal, France and J a pan too have shown interest in the I n Ridge and are keen to collaborate with India. It is foreseen that In...

  2. Oak Ridge reservation land-use plan

    Energy Technology Data Exchange (ETDEWEB)

    Bibb, W. R.; Hardin, T. H.; Hawkins, C. C.; Johnson, W. A.; Peitzsch, F. C.; Scott, T. H.; Theisen, M. R.; Tuck, S. C.

    1980-03-01

    This study establishes a basis for long-range land-use planning to accommodate both present and projected DOE program requirements in Oak Ridge. In addition to technological requirements, this land-use plan incorporates in-depth ecological concepts that recognize multiple uses of land as a viable option. Neither environmental research nor technological operations need to be mutually exclusive in all instances. Unique biological areas, as well as rare and endangered species, need to be protected, and human and environmental health and safety must be maintained. The plan is based on the concept that the primary use of DOE land resources must be to implement the overall DOE mission in Oak Ridge. This document, along with the base map and overlay maps, provides a reasonably detailed description of the DOE Oak Ridge land resources and of the current and potential uses of the land. A description of the land characteristics, including geomorphology, agricultural productivity and soils, water courses, vegetation, and terrestrial and aquatic animal habitats, is presented to serve as a resource document. Essentially all DOE land in the Oak Ridge area is being fully used for ongoing DOE programs or has been set aside as protected areas.

  3. Oak Ridge Reservation Waste Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Turner, J.W. [ed.

    1995-02-01

    This report presents the waste management plan for the Oak Ridge Reservation facilities. The primary purpose is to convey what facilities are being used to manage wastes, what forces are acting to change current waste management systems, and what plans are in store for the coming fiscal year.

  4. tilled soil under different ridge width

    African Journals Online (AJOL)

    Administrator

    2011-09-21

    Sep 21, 2011 ... in different agricultural system with a wide variety of climate, crops and labour intensity. Several strategies have been investigated that ridges could affect soil temperature and water content, as well as soil water and solute movement compared with traditional flat farming. (Waddell and Weil, 2006). Willis et ...

  5. Seismic response of a Taiwanese ridge

    Science.gov (United States)

    Rault, Claire; Meunier, Patrick; Burtin, Arnaud; Wein Hao, Vvn; Wu, Yih-Min; Marc, Odin; Lai, Tz-Shin; Lyon-Caen, Hélène; Hovius, Niels

    2017-04-01

    A line of 6 broadband seismometers have been deployed across a ridge in the Hualien County (Eastern Taiwan) in order to study the seismic response of the hill. From March 2015 to June 2016, the network has been continuously recording waves incoming from the Taiwanese regional seismicity. The hill is well approximated by a triangular topography of 3600m in length by 900m in height. We present the primarily analysis performed on 1272 earthquakes of of magnitude (Ml) greater than Ml=3 and less than 200km distant to the study site. We show that most of the uphill records exhibit a systematic amplification of seismic waves (peak to peak velocity) on the resonance frequency band of the ridge [0,5-3Hz] with respect to the referenced records at the base of the hill. Amplification on sharp frequency band also occurs in other sites, reflecting complex local site effects. We found that the average amplification at the top on the transverse component to the ridge elongation is found to be 2.5 time higher than the one on the parallel. This amplification is found to be independent of the shaking intensity (PGV). But we show that it strongly depends on the parameter α defined as the angle between the azimuth of incoming wave and the azimuth of the ridge divide.

  6. DEVELOPMENT OF A RIDGE PROFILE WEEDER

    African Journals Online (AJOL)

    ES Obe

    1980-03-01

    driven rotating horizontal short shaft which is connected by universal joints to two gangs of rotary hoe weeders. With the short shaft nearly at the bottom of a furrow between two ridges, the gangs of weeders lie on the sides of ...

  7. Remedial Investigation Work Plan for Chestnut Ridge Operable Unit 1 (Chestnut Ridge Security Pits) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This Remedial Investigation (RI) Work Plan specifically addresses Chestnut Ridge Operable Unit 1, (OU1) which consists of the Chestnut Ridge Security Pits (CRSP). The CRSP are located {approximately}800 ft southeast of the central portion of the Y-12 Plant atop Chestnut Ridge, which is bounded to the northwest by Bear Creek Valley and to the southeast by Bethel Valley. Operated from 1973 to 1988, the CRSP consisted of a series of trenches used for the disposal of classified hazardous and nonhazardous waste materials. Disposal of hazardous waste materials was discontinued in December 1984, while nonhazardous waste disposal ended on November 8, 1988. An RI is being conducted at this site in response to CERCLA regulations. The overall objectives of the RI are to collect data necessary to evaluate the nature and extent of contaminants of concern (COC), support an ecological risk assessment (ERA) and a human health risk assessment (HHRA), support the evaluation of remedial alternatives, and ultimately develop a Record of Decision for the site. The purpose of this Work Plan is to outline RI activities necessary to define the nature and extent of suspected contaminants at Chestnut Ridge OU1. Potential migration pathways also will be investigated. Data collected during the RI will be used to evaluate the overall risk posed to human health and the environment by OU1.

  8. Efficiency of local surface plasmon polariton excitation on ridges

    DEFF Research Database (Denmark)

    Radko, Ilya; Bozhevolnyi, Sergey I.; Boltasseva, Alexandra

    2008-01-01

    We investigate experimentally and numerically the efficiency of surface plasmon polariton excitation by a focused laser beam using gold ridges. The dependence of the efficiency on geometrical parameters of ridges and wavelength dependence are examined. The experimental measurements accomplished...

  9. NPP Tropical Forest: John Crow Ridge, Jamaica, 1974-1978

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: Biomass and productivity for four subtypes of an upper montane tropical forest along John Crow Ridge in the Blue Ridge Mountains of Jamaica from 1974 to 1978

  10. Alveolar but not intravenous S-ketamine inhibits alveolar sodium transport and lung fluid clearance in rats

    NARCIS (Netherlands)

    Berger, Marc M.; Pitzer, Bernhard; Zügel, Stefanie; Wieland, Catharina W.; Vlaar, Alexander P.; Schultz, Marcus J.; Dahan, Albert; Bärtsch, Peter; Hollmann, Markus W.; Mairbäurl, Heimo

    2010-01-01

    BACKGROUND: S-ketamine is frequently used for analgosedation, especially during sepsis and cardiovascular instability. Because S-ketamine blocks voltage-gated sodium (Na+) channels in neurons and skeletal muscle, it is conceivable that S-ketamine also blocks alveolar epithelial Na+ channels that are

  11. Does the lateral intercondylar ridge disappear in ACL deficient patients?

    NARCIS (Netherlands)

    van Eck, C.F.; Martins, C.A.Q.; Vyas, S.M.; Celentano, U.; van Dijk, C.N.; Fu, F.H.

    2010-01-01

    The aim of this study was to determine whether there is a difference in the presence of the lateral intercondylar ridge and the lateral bifurcate ridge between patients with sub-acute and chronic ACL injuries. We hypothesized that the ridges would be present less often with chronic ACL deficiency.

  12. Enhancing size based size separation through vertical focus microfluidics using secondary flow in a ridged microchannel.

    Science.gov (United States)

    Tasadduq, Bushra; Lam, Wilbur; Alexeev, Alexander; Sarioglu, A Fatih; Sulchek, Todd

    2017-12-12

    High throughput size based separation and sorting of bioparticles and cells is critical to a variety of biomedical processing steps for medical diagnostics and pharmaceutical purification. Improving microfluidic size-based particle/cell sorting is a challenge to better address the need for generating more homogeneous subpopulations for study and use. We propose a novel advance to microfluidic sorting devices that uses three-dimensional focusing of the sample to optimally position particles to amplify the size-dependent differences in trajectories caused by differential secondary flows. The result is an increase in the purity of small particles by 35- fold and large particles by 8-fold in comparison to unfocused flow. Our simulated and experimental data reveal for the first time that positioning particles in three-dimensional space can be used to better leverage the differential lateral movement of particles with different sizes as they flow in microchannel with transverse secondary flows. The focusing approach may also be useful to improve positioning of particles with inertial channels with multiple equilibrium positions. This technique performs continuous-flow, high throughput size based sorting of millions of particles and cells in a minute without any pre and post-processing. We have also demonstrated improved enrichment and recovery of white blood cells from human blood.

  13. Distracción osteogénica alveolar como método de aumento del reborde alveolar

    Directory of Open Access Journals (Sweden)

    Denia Morales Navarro

    2011-03-01

    Full Text Available La distracción osteogénica alveolar, como proceso biológico de neoformación de hueso alveolar, nos motivó a la realización de la presente revisión bibliográfica, con el objetivo enfatizar en el análisis de las variables: antecedentes históricos en Cuba, clasificación de los distractores, fases de la distracción (latencia, distracción y consolidación, indicaciones, contraindicaciones, ventajas, desventajas y complicaciones. Se realizó una revisión bibliográfica mediante la consulta de bases de datos de los sistemas referativos, como MEDLINE y PubMed con la utilización de descriptores "alveolar distraction" y "osteogenic distraction". Se consultaron las fuentes bibliográficas publicadas fundamentalmente en los últimos 5 años, lo que reveló que esta técnica es una excelente alternativa para la formación de huesos y tejidos blandos en zonas de atrofia alveolar, que consta de tres etapas: latencia, distracción y consolidación; un método previsible y con bajas tasas de reabsorción ósea en comparación con otras técnicas de aumento del reborde alveolar. Tiene su principal indicación en la terapia de implantes al proveer volumen óseo. Debemos individualizar cada caso y usar el método más adecuado según las características clínicas y personales del paciente. Una adecuada selección de los casos y una mejor comprensión de la técnica son los puntales para lograr exitosos resultados mediante la distracción osteogénica alveolar. En Cuba se ha aplicado poco la distracción alveolar, por lo que ha sido necesario ampliar los estudios sobre esta temática.

  14. Characteristic aspects of alveolar proteinosis diagnosis Aspectos característicos do diagnóstico da proteinose alveolar

    Directory of Open Access Journals (Sweden)

    Thiago Prudente Bártholo

    2012-02-01

    Full Text Available Alveolar proteinosis is an uncommon pulmonary disease characterized by an accumulation of surfactant in terminal airway and alveoli, thereby impairing gas exchange and engendering respiratory insufficiency in some cases. Three clinically and etiologically distinct forms of pulmonary alveolar proteinosis are recognized: congenital, secondary and idiopathic, the latter corresponding to 90% of the cases. In this case report we present a young male patient that was diagnosed with alveolar proteinosis. Computed tomography of the thorax, bronchoscopy and transbronchial biopsy were performed. The histopathologic aspect was characteristic. The patient was discharged in good health conditions and remains asymptomatic to date.Proteinose alveolar é uma doença pulmonar incomum caracterizada pelo acúmulo de surfactante nas vias aéreas terminais e nos alvéolos, alterando a troca gasosa e, em alguns casos, promovendo insuficiência respiratória. Três formas clínicas e etiologicamente distintas de proteinose alveolar são reconhecidas: congênitas, secundárias e idiopáticas (mais de 90% dos casos são de etiologia idiopática. Neste relato, apresentamos um homem jovem que foi diagnosticado com proteinose pulmonar. Tomografia computadorizada de tórax, broncoscopia e biópsia transbrônquica foram realizadas. O aspecto histopatológico foi característico. O paciente teve alta, com boas condições de saúde, e encontra-se assintomático nos dias de hoje.

  15. Near-inertial motions over a mid-Ocean Ridge; Effects of topography and hydrothermal plumes

    Science.gov (United States)

    Thomson, Richard E.; Roth, Sharon E.; Dymond, Jack

    1990-05-01

    We investigate the spatial structure of near-inertial motions in the vicinity of the Endeavour segment of Juan de Fuca Ridge (approximately 48°N, 129°W) in the northeast Pacific Ocean. On the basis of time series current and water property data collected from September 1984 to September 1987, near-inertial motions are ubiquitous features of the 2200-m water column, with root-mean-square (rms) current speeds comparable to those of the dominant M2 tidal currents. Within the lower 1000 m of the water column where most of the observations were obtained, near-inertial oscillations have rms current speeds of O(1 cm/s) and vertical isotherm displacements of O(10 m). The fluctuations are confined to the frequency band 0.966-1.079 f(f is the local Coriolis parameter) and have characteristic event durations of 1 week. Although the spectra of subsurface motions are dominated by the "blue-shifted" superinertial band, significant spectral peaks are found also in the subinertial and inertial frequency bands. Marked alteration of the near-inertial current amplitudes occurs over two well-defined depth zones within the study region. Within the 200-m zone immediately above the 2100-m ridge crest, current amplitudes are amplified by a factor of 1.2-1.7 because of bottom reflection and/or scattering of the downward propagating energy. Evidence that the amplification may be linked to bottom reflection rather than to scattering is provided by flattening and cross-slope rotation of the near-inertial current ellipses with increased proximity to the top of the ridge. Reflection would occur at grazing angles of less than 1° and would be associated with surface-generated waves originating at distances of over 100 km from the observational site. In contrast to the enhanced amplitudes immediately above the top of the ridge, near-inertial currents within the 1600- to 1800-m depth range undergo pronounced attenuation and frequency alteration. Amplitude attenuation is especially pronounced for

  16. Influence of age and vertical facial type on the location of the mandibular foramen.

    Science.gov (United States)

    Epars, Jean-Francois; Mavropoulos, Anestis; Kiliaridis, Stavros

    2013-01-01

    A successful inferior alveolar nerve block anesthesia necessitates knowledge of the exact location of the mandibular foramen. The aim of this study was to determine whether the location of the mandibular foramen is related to the age or the vertical facial morphology of the patient. Lateral cephalometric radiographs from 145 patients (average age 10.4 years; range 6.3 to 14.6 years) were collected. The position of the mandibular foramen was investigated both antero-posteriorely and vertically in relation to the occlusal plane. Pearson's correlation and multiple regression analysis were performed between the variables under study. The mandibular foramen was horizontally located at 60 percent of the ramus width from its anterior border. The vertical distance of the mandibular foramen from the occlusal plane was significantly correlated to all examined variables, especially to the patient's age (r=0.69, Pfacial anterior soft tissue ratio (r=-0.76, Pvariation of the vertical position of the mandibular foramen. Taking into consideration the age and the facial morphology of the patient may help better locate the mandibular foramen, which is a prerequisite for a successful and safe inferior alveolar nerve block.

  17. Oak Ridge 25-MV tandem accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Ziegler, N.F.; Richardson, E.G.; Mann, J.E.; Juras, R.C.; Jones, C.M.; Biggerstaff, J.A.; Benjamin, J.A.

    1981-01-01

    A new heavy-ion accelerator facility is nearing completion at the Oak Ridge National Laboratory. This paper presents a brief description of the scope and status of this project and a discussion of some aspects of the first operational experience with the 25 MV tandem accelerator which is being provided by the National Electrostatics Corporation (NEC) as a major component of the first phase of the facility.

  18. Oak Ridge National Laboratory Waste Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    The objective of the Oak Ridge National Laboratory Waste Management Plan is to compile and to consolidate information annually on how the ORNL Waste Management Program is conducted, which waste management facilities are being used to manage wastes, what forces are acting to change current waste management systems, what activities are planned for the forthcoming fiscal year (FY), and how all of the activities are documented.

  19. ORNL (Oak Ridge National Laboratory) 89

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, T.D.; Appleton, B.R.; Jefferson, J.W.; Merriman, J.R.; Mynatt, F.R.; Richmond, C.R.; Rosenthal, M.W.

    1989-01-01

    This is the inaugural issues of an annual publication about the Oak Ridge National Laboratory. Here you will find a brief overview of ORNL, a sampling of our recent research achievements, and a glimpse of the directions we want to take over the next 15 years. A major purpose of ornl 89 is to provide the staff with a sketch of the character and dynamics of the Laboratory.

  20. GPS, su datum vertical.

    Directory of Open Access Journals (Sweden)

    Esteban Dörries

    2016-03-01

    Full Text Available La introducción de la metodología GPS en aplicaciones topográficas y geodésicas pone en notoria evidencia la clásica separación de sistemas de referencia en horizontal y vertical. Con GPS el posicionamiento es tridimensional, pero el concepto de altura difiere del clásico. Si se desea utilizar la información altimétrica debe contemplarse la ondulación del geoide.

  1. Global survey of lunar wrinkle ridge formation times

    Science.gov (United States)

    Yue, Z.; Michael, G. G.; Di, K.; Liu, J.

    2017-11-01

    Wrinkle ridges are a common feature of the lunar maria and record subsequent contraction of mare infill. Constraining the timing of wrinkle ridge formation from crater counts is challenging because they have limited areal extent and it is difficult to determine whether superposed craters post-date ridge formation or have alternatively been uplifted by the deformation. Some wrinkle ridges do allow determination to be made. This is possible where a ridge shows a sufficiently steep boundary or scarp that can be identified as deforming an intersecting crater or the crater obliterates the relief of the ridge. Such boundaries constitute only a small fraction of lunar wrinkle ridge structures yet they are sufficiently numerous to enable us to obtain statistically significant crater counts over systems of structurally related wrinkle ridges. We carried out a global mapping of mare wrinkle ridges, identifying appropriate boundaries for crater identification, and mapping superposed craters. Selected groups of ridges were analyzed using the buffered crater counting method. We found that, except for the ridges in mare Tranquilitatis, the ridge groups formed with average ages between 3.5 and 3.1 Ga ago, or 100-650 Ma after the oldest observable erupted basalts where they are located. We interpret these results to suggest that local stresses from loading by basalt fill are the principal agent responsible for the formation of lunar wrinkle ridges, as others have proposed. We find a markedly longer interval before wrinkle ridge formation in Tranquilitatis which likely indicates a different mechanism of stress accumulation at this site.

  2. Utilization of high resolution satellite gravity over the Carlsberg Ridge

    Science.gov (United States)

    Chatterjee, S.; Bhattacharyya, R.; Majumdar, T. J.

    2007-12-01

    The Carlsberg Ridge lies between the equator and the Owen fracture zone. It is the most prominent mid-ocean ridge segment of the western Indian Ocean, which contains a number of earthquake epicenters. Satellite altimetry can be used to infer subsurface geological structures analogous to gravity anomaly maps generated through ship-borne survey. In this study, free-air gravity and its 3D image have been generated over the Carlsberg Ridge using a very high resolution data base, as obtained from Geosat GM, ERS-1, Seasat and TOPEX/POSEIDON altimeter data. As observed in this study, the Carlsberg Ridge shows a slow spreading characteristic with a deep and wide graben (average width ˜15 km). The transform fault spacing confirms variable slow to intermediate characteristics with first and second order discontinuities. The isostatically compensated region of the Carlsberg Ridge could be demarcated with near zero contour values in the free-air gravity anomaly images over and along the Carlsberg Ridge axes and over most of the fracture zone patterns. Few profiles have been generated across the Carlsberg Ridge and the characteristics of slow/intermediate spreading ridge of various orders of discontinuity could be identified. It has also been observed in zero contour image as well as in the characteristics of valley patterns along the ridge from NW to SE that different spreading rates, from slow to intermediate, are occurring in different parts of the Carlsberg ridge. It maintains the morphology of a slow spreading ridge in the NW, where the wide and deep axial valley (˜1.5 3 km) also implies the pattern of a slow spreading ridge. However, a change in the morphology/depth of the axial valley from NW to SE indicates the nature of the Carlsberg Ridge as a slow to intermediate spreading ridge.

  3. Post-neonatal drop in alveolar SP-A expression

    DEFF Research Database (Denmark)

    Stray-Pedersen, Arne; Vege, Ashild; Stray-Pedersen, Asbjorg

    2008-01-01

    BACKGROUND: Surfactant protein A (SP-A) is synthesized in the lung and is a part of the innate immune system. The aim of this study was to evaluate the expression of SP-A in lung tissue from fetuses, infants, children and adults with special regard to sudden infant death syndrome (SIDS). METHODS......: A total of 160 cases were studied; 19 fetuses and neonates, 59 SIDS and 49 explained infant deaths below 1 year of age, 19 toddlers and 14 adults. Immunohistochemical detection of SP-A using monoclonal antibodies was performed by microscopy of lung tissue specimens collected at autopsy. A scoring system...... was developed enabling semi-quantitative estimation of staining intensity and distribution. RESULTS: SP-A was detected in the terminal bronchioles and alveolar spaces of fetuses >35 weeks gestation. The intra-alveolar SP-A expression increased in the perinatal period followed by a marked drop in infants aged...

  4. AUTOMATIC SEGMENTATION AND CLASSIFICATION OF CELLS FROM BRONCHO ALVEOLAR LAVAGE

    Directory of Open Access Journals (Sweden)

    Olivier Lezoray

    2011-05-01

    Full Text Available Broncho alveolar lavage is the most commonly used diagnostic tool for confirming alveolar hemorrhage. Golde has introduced a ranking score, based on the hemosiderin content of macrophages which enables ranking cells from 0 to 4 based on the degree of Prussian blue stain. We propose a complete image analysis scheme to automatically perform both the extraction of the cellular objects and the ranking of each cell according to the Golde score. The image analysis techniques used mainly involve clustering and mathematical morphology. A 2D histogram is clustered to extract the main cellular components, a color watershed is used to determine and refine the regions. Finally, the cellular components of interest are firstly classified according to their hue and secondly according to their staining repartition. The proposed image analysis technique is very fast and produces reliable and accurate results.

  5. Imaging diagnosis of alveolar echinococcosis in young patients

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, F. [1. Dept. of Surgery, Hokkaido Univ. School of Medicine, Sapporo (Japan); Ohkawa, Y. [1. Dept. of Surgery, Hokkaido Univ. School of Medicine, Sapporo (Japan); Sato, N. [1. Dept. of Surgery, Hokkaido Univ. School of Medicine, Sapporo (Japan); Uchino, J. [1. Dept. of Surgery, Hokkaido Univ. School of Medicine, Sapporo (Japan); Hata, Y. [Kushiro Rosai Hospital, Hokkaido (Japan)

    1997-01-01

    We review the imaging findings in seven children with alveolar echinococcosis of the liver. Calcification was seen on plain abdominal films in five of seven patients (66.6 %); the calcifications were small or coarse with irregular margins. Ultrasound was performed in four cases, identifying the lesions in all four as small calcifications with or without cysts. Computed tomography (CT) was performed in four cases and showed small calcifications, calcifications surrounding a cyst, or an aggregate of calcifications. Angiography was performed in all seven patients and showed changes of intrahepatic arterial stretching, overgrowth of small arteries, and a honeycomb pattern in the capillary phase. Venography revealed compression of the inferior vena cava in two patients. Serum screening together with ultrasonography and CT are useful for diagnostic imaging of alveolar echinococcosis. (orig.). With 3 figs., 2 tabs.

  6. Processing of Oak Ridge Mixed Waste Labpacks

    Energy Technology Data Exchange (ETDEWEB)

    Estes, C. H.; Franco, P.; Bisaria, A.

    2002-02-26

    The Oak Ridge Site Treatment Plan (STP) issued under a Tennessee Commissioner's Order includes a compliance milestone related to treatment of mixed waste labpacks on the Oak Ridge sites. The treatment plan was written and approved in Fiscal Year 1997. The plan involved approximately 1,100 labpacks and 7,400 on-the-shelf labpackable items stored at three Department of Energy (DOE) sites on the Oak Ridge Reservation (ORR). The labpacks and labpack items consist of liquids and solids with various chemical constituents and radiological concerns. The waste must be processed for shipment to a commercial hazardous waste treatment facility or treatment utilizing a Broad Spectrum mixed waste treatment contract. This paper will describe the labpack treatment plan that was developed as required by the Site Treatment Plan and the operations implemented to process the labpack waste. The paper will discuss the labpack inventory in the treatment plan, treatment and disposal options, processing strategies, project risk assessment, and current project status.

  7. Microbial life in ridge flank crustal fluids.

    Science.gov (United States)

    Huber, Julie A; Johnson, H Paul; Butterfield, David A; Baross, John A

    2006-01-01

    To determine the microbial community diversity within old oceanic crust, a novel sampling strategy was used to collect crustal fluids at Baby Bare Seamount, a 3.5 Ma old outcrop located in the north-east Pacific Ocean on the eastern flank of the Juan de Fuca Ridge. Stainless steel probes were driven directly into the igneous ocean crust to obtain samples of ridge flank crustal fluids. Genetic signatures and enrichment cultures of microorganisms demonstrate that these crustal fluids host a microbial community composed of species indigenous to the subseafloor, including anaerobic thermophiles, and species from other deep-sea habitats, such as seawater and sediments. Evidence using molecular techniques indicates the presence of a relatively small but active microbial population, dominated by bacteria. The microbial community diversity found in the crustal fluids may indicate habitat variability in old oceanic crust, with inputs of nutrients from seawater, sediment pore-water fluids and possibly hydrothermal sources. This report further supports the presence of an indigenous microbial community in ridge flank crustal fluids and advances our understanding of the potential physiological and phylogenetic diversity of this community.

  8. A RARE CASE OF ALVEOLAR SARCOMA OF THE PARAPHARYNGEAL SPACE

    Directory of Open Access Journals (Sweden)

    E. N. Novozhilova

    2012-01-01

    Full Text Available The paper describes the rare malignancy alveolar soft tissue sarcoma. The tumor was located in the parapharyngeal space; it was detected during pregnancy. The authors give the data available in the literature on the clinical manifestations of this disease, the specific features of morphological diagnosis, and treatment policy. The described case focuses on the complexities of diagnosis and preoperative preparation and surgical techniques. 

  9. Bruxism elicited by inferior alveolar nerve injury: a case report.

    Science.gov (United States)

    Melis, Marcello; Coiana, Carlo; Secci, Simona

    2012-02-01

    The aim of this case report is to describe the history of a patient who received an injury to the right inferior alveolar nerve after placement of a dental implant, with bruxism noted afterward. The symptoms were managed by the use of an occlusal appliance worn at night and occasionally during the day, associated with increased awareness of parafunction during the day to reduce muscle pain and fatigue. Paresthesia of the teeth, gingiva, and lower lip persisted but were reduced during appliance use.

  10. Pathogenetics of Alveolar Capillary Dysplasia with Misalignment of Pulmonary Veins

    OpenAIRE

    Szafranski, Przemyslaw; Gambin, Tomasz; Dharmadhikari, Avinash V.; Akdemir, Kadir Caner; Jhangiani, Shalini N.; Schuette, Jennifer; Godiwala, Nihal; Yatsenko, Svetlana A.; Sebastian, Jessica; Madan-Khetarpal, Suneeta; Surti, Urvashi; Abellar, Rosanna G.; Bateman, David A.; Wilson, Ashley L.; Markham, Melinda H.

    2016-01-01

    Alveolar capillary dysplasia with misalignment of pulmonary veins (ACDMPV) is a lethal lung developmental disorder caused by heterozygous point mutations or genomic deletion copy-number variants (CNVs) of FOXF1 or its upstream enhancer involving fetal lung-expressed long noncoding RNA genes LINC01081 and LINC01082. Using custom-designed array comparative genomic hybridization, Sanger sequencing, whole exome sequencing (WES), and bioinformatic analyses, we studied 22 new unrelated families (20...

  11. Topographic analysis of the maxillary premolars relative to the maxillary sinus and the alveolar bone using cone beam computed tomography.

    Science.gov (United States)

    Nishihara, Kazuhide; Yoshimine, Shin-Ichiro; Goto, Takahiro; Ishihata, Kiyohide; Kume, Ken-Ichi; Yoshimura, Takuya; Nakamura, Norifumi; Arasaki, Akira

    2017-05-01

    The purpose of the present study was to elucidate the anatomic characteristics of the maxillary premolars for the planning of dental treatment using cone beam computed tomography (CBCT). CBCT images were obtained for 150 maxillary premolars in 68 patients. The internal angle formed by the long axis of the maxillary premolars and the long axis of the alveolar bone was evaluated on the cross-sectional images. The vertical relationships between the maxillary premolars and the maxillary sinus were classified into 5 categories. The bone width and internal angle were compared among the images classified into the 5 categories. The internal angle was 25.5 ± 6.9° at the maxillary first premolars. The incidence of Type I in the maxillary first premolars was 46.7%. In the maxillary second premolars, the incidence of Type I (14.7%) was significantly lower than the total incidence of Types II, III, IV, and V (85.3%). Type I had the significantly largest internal angle (28.0 ± 7.7°) among all types for the maxillary first premolars. When considering dental treatment in the maxillary premolars, one should observe the inclination of the maxillary premolars to the alveolar bone as well as the position of the inferior wall of the maxillary sinus. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Chronic Alcohol Ingestion Changes the Landscape of the Alveolar Epithelium

    Directory of Open Access Journals (Sweden)

    Charles A. Downs

    2013-01-01

    Full Text Available Similar to effects of alcohol on the heart, liver, and brain, the effects of ethanol (EtOH on lung injury are preventable. Unlike other vital organ systems, however, the lethal effects of alcohol on the lung are underappreciated, perhaps because there are no signs of overt pulmonary disorder until a secondary insult, such as a bacterial infection or injury, occurs in the lung. This paper provides overview of the complex changes in the alveolar environment known to occur following both chronic and acute alcohol exposures. Contemporary animal and cell culture models for alcohol-induced lung dysfunction are discussed, with emphasis on the effect of alcohol on transepithelial transport processes, namely, epithelial sodium channel activity (ENaC. The cascading effect of tissue and phagocytic Nadph oxidase (Nox may be triggered by ethanol exposure, and as such, alcohol ingestion and exposure lead to a prooxidative environment; thus impacting alveolar macrophage (AM function and oxidative stress. A better understanding of how alcohol changes the landscape of the alveolar epithelium can lead to improvements in treating acute respiratory distress syndrome (ARDS for which hospitalized alcoholics are at an increased risk.

  13. Guided Bone Regeneration for the Reconstruction of Alveolar Bone Defects

    Science.gov (United States)

    Khojasteh, Arash; Kheiri, Lida; Motamedian, Saeed Reza; Khoshkam, Vahid

    2017-01-01

    Background: Guided bone regeneration (GBR) is the most common technique for localized bone augmentation. Purpose: The purpose of this review was to categorize and assess various GBR approaches for the reconstruction of human alveolar bone defects. Materials and Methods: Electronic search of four databases including PubMed/Medline, EMBASE, Web of Science, and Cochrane and hand searching were performed to identify human trials attempting GBR for the reconstruction of alveolar bony defects for at least 10 patients from January 2000 to August 2015. To meet the inclusion criteria, studies had to report preoperative defect dimensions in addition to outcomes of bone formation and/or resorption. Results: Twenty-five human clinical trials were included of which 17 used conventional technique that is the use of space maintaining membrane with bone grafting particles (GBR I). Application of block bone graft with overlying membrane and particulate fillers was reported in seven studies (GBR II), and utilizing cortical bone block tented over a defect preserving particulate fillers was reported by one study (GBR III). A wide range of initial defects’ sizes and treatment results were reported. Conclusions: This review introduces a therapeutically oriented classification system of GBR for treating alveolar bone defects. High heterogeneity among studies hindered drawing definite conclusions in regard to superiority of one to the other GBR technique. PMID:29264297

  14. Fine needle aspiration cytology of metastatic alveolar rhabdomyosarcoma

    Directory of Open Access Journals (Sweden)

    Abhishek Sharma

    2011-01-01

    Full Text Available Rhabdomyosarcoma (RMS is an aggressive malignant soft tissue tumor that arises from primitive striated muscle cells called rhabdomyoblasts. RMS is a rare tumor in adults, and involvement of the sinonasal area is extremely rare, comprising only 1.5% of all reported head and neck RMSs. Alveolar RMS, mainly seen in adults, has the worst prognosis. Incidence of lymph node metastases is more common in this type compared with the other forms. Fine needle aspiration cytology (FNAC has been used extensively in the diagnosis of metastatic malignancies. However, metastatic soft tissue sarcomas are often overlooked, primarily due to the low frequency with which they occur. Here, we report a rare case of metastatic alveolar RMS in the cervical lymph nodes of an 18-year-old girl that was detected by FNAC. After 6 months, the patient came with a huge mass involving the nasal vestibule and the upper lip. Histology of both the main mass and the lymph nodes revealed alveolar RMS.

  15. Alcohol Induces Mitochondrial Redox Imbalance in Alveolar Macrophages

    Science.gov (United States)

    Liang, Yan; Harris, Frank L.; Jones, Dean P.; Brown, Lou Ann S.

    2013-01-01

    Alcohol abuse suppresses the immune responses of alveolar macrophages (AMs) and increases the risk of a respiratory infection via chronic oxidative stress and depletion of critical antioxidants within alveolar cells and the alveolar lining fluid. Although alcohol-induced mitochondrial oxidative stress has been demonstrated, the oxidation of the mitochondrial thioredoxin redox circuit in response to alcohol has not been examined. In vitro ethanol exposure of a mouse AM cell line and AMs from an ethanol-fed mice demonstrated NADPH depletion concomitant with oxidation of mitochondrial glutathione and oxidation of the thioredoxin redox circuit system including thioredoxin 2 (Trx2) and thioredoxin 2 reductase (Trx2R). Mitochondrial peroxiredoxins (Prdxs), which are critical for the reduction of the thioredoxin circuit, were irreversibly hyperoxidized to an inactive form. Ethanol also decreased the mRNAs for Trx2, Trx2R, Prdx3, and Prdx5 plus the mitochondrial thiol-disulfide proteins glutaredoxin 2, glutathione reductase, and glutathione peroxidase 2. Thus, the mitochondrial thioredoxin circuit was highly oxidized by ethanol, thereby compromising the mitochondrial antioxidant capacity and ability to detoxify mitochondrial reactive oxygen species. Oxidation of the mitochondrial thioredoxin redox circuit would further compromise the transient oxidation of thiol groups within specific proteins, the basis of redox signaling, and the processes by which cells respond to oxidants. Impaired mitochondria can then jeopardize cellular function of AMs such as phagocytosis which may explain the increased risk of respiratory infection in subjects with an alcohol use disorder. PMID:24140864

  16. Referral practice of military corpsmen regarding dento-alveolar trauma.

    Science.gov (United States)

    Zadik, Yehuda; Levin, Liran

    2008-06-01

    The aim of this study was to evaluate the Israeli military corpsmens' practice of referral to professional treatment regarding traumatic dental injuries. The study consisted of 250 corpsmen during their military service. Questionnaire and slide show were used to present clinical photos with short history descriptions of dento-alveolar traumatic injuries. Participants were asked to indicate the preferred referral destination for each case to state the urgency of referral to the destination and to note their regional emergency department with an oral and maxillofacial surgery consultant and the nearest 24-h emergency dental clinic. Corpsmen immediately evacuated the wounded with full-thickness lip laceration (59%), tooth avulsion (79%), alveolar fracture (88%) and mandibular fracture (100%). Most corpsmen referred crown fracture to a dental clinic and alveolar- or mandibular-bone fracture to the emergency department. Tooth avulsion cases were equally distributed between the emergency department and dental clinic and full-thickness lip laceration between the emergency department and general medical office. Familiarity with the nearest 24-h emergency dental clinic was found in 38% and with the regional emergency department with an oral and maxillofacial surgery consultant in 57%. The knowledge of this group of military corpsmen regarding referral practices was encouraging. However, further continuing education with regards to the regionally available emergency services is needed. Special emphasis should be given to provide primary caregivers with the relevant education to improve their knowledge and ability of dealing dental trauma.

  17. Massive Alveolar Hemorrhage During Wegener Granulomatosis: a Case Report

    Directory of Open Access Journals (Sweden)

    Gökhan Perincek

    2011-11-01

    Full Text Available This is a presentation of Wegener Granulomatosis (WG disease. Even though the lungs are rarely affected. massive alveolar hemorrhage is seen which leads to mortality. The patient was a 28 year old man. His illness was diagnosed as WG and glomerulonephritis a year previously and he was treated by administration of methylprednisolone orally. He had been treated irregularly. He applied to the emergency service with hemoptysis and asthma complaints two days earlier. After the results of his examination Hb: 3.6 gr/dl, Htc:10.3%, Üre:131 mg /dl, kreatini: 7.7 mg/dl, pH: 7.41, pO2: 55 mmHg, pCO2:33 mmHg, and being diagnosed as alveolar consolidation on lung X-ray, he was taken to the intensive care unit with a diagnosis of a massive alveolar hemorrhagei. He was intubated and attached to mechanical ventilation. He was treated with parenteral 1 mg/kg/day methylprednisolone and, siklofosfamid 2 mg/kg/day. He was extubated on the 21st day. He was taken to the chest service department on 24th day. He is still being treated.

  18. Alveolar epithelial type II cell: defender of the alveolus revisited

    Directory of Open Access Journals (Sweden)

    Fehrenbach Heinz

    2001-01-01

    Full Text Available Abstract In 1977, Mason and Williams developed the concept of the alveolar epithelial type II (AE2 cell as a defender of the alveolus. It is well known that AE2 cells synthesise, secrete, and recycle all components of the surfactant that regulates alveolar surface tension in mammalian lungs. AE2 cells influence extracellular surfactant transformation by regulating, for example, pH and [Ca2+] of the hypophase. AE2 cells play various roles in alveolar fluid balance, coagulation/fibrinolysis, and host defence. AE2 cells proliferate, differentiate into AE1 cells, and remove apoptotic AE2 cells by phagocytosis, thus contributing to epithelial repair. AE2 cells may act as immunoregulatory cells. AE2 cells interact with resident and mobile cells, either directly by membrane contact or indirectly via cytokines/growth factors and their receptors, thus representing an integrative unit within the alveolus. Although most data support the concept, the controversy about the character of hyperplastic AE2 cells, reported to synthesise profibrotic factors, proscribes drawing a definite conclusion today.

  19. Theophylline improves lipopolysaccharide-induced alveolarization arrest through inflammatory regulation.

    Science.gov (United States)

    He, Hua; Chen, Fei; Ni, Wensi; Li, Jianhui; Zhang, Yongjun

    2014-07-01

    Bronchopulmonary dysplasia (BPD) is characterized by alveolar simplification with decreased numbers of alveoli and increased airspace. BPD, frequently suffered by very low birth weight infants, has been closely associated with intrauterine infection. However, the underlying mechanisms of BPD remain unclear. In the present study, it was identified that administration of intra-amniotic lipopolysaccharide (LPS) to pregnant rats on embryonal day 16.5 (E16.5) induced significant alveolarization arrest similar to that of BPD in neonatal pups, and theophylline injected subcutaneously into the newborns improved the pathological changes. To further investigate the underlying mechanism of the morphogenesis amelioration of theophylline, cytokine antibody arrays were performed with the lung lysates of neonatal rats. The results indicated that LPS upregulated a series of pro-inflammatory cytokines and theophylline significantly attenuated the expression levels of pro-inflammatory cytokines tumor necrosis factor‑α, macrophage inflammatory protein (MIP)-1α and MIP-2, and markedly elevated the production of tumor growth factor (TGF)-β family members TGF-β1, TGF-β2 and TGF-β3, which are anti‑inflammatory cytokines. Accordingly, it was hypothesized that theophylline may protect against BPD and improve chorioamnionitis‑induced alveolar arrest by regulating the balance between pro‑and anti-inflammatory cytokine expression.

  20. Vertical bone growth following autotransplantation of the developing maxillary third molar to replace a retained mandibular permanent molar: a case report.

    Science.gov (United States)

    Plakwicz, Paweł; Czochrowska, Ewa Monika; Milczarek, Anna; Zadurska, Malgorzata

    2014-01-01

    A retained permanent mandibular first molar caused arrested development and a defect of the alveolar bone in a 16-year-old girl. Extraction of the ankylosed tooth was immediately followed by autotransplantation of the developing maxillary third molar. At the 3-year follow-up examination the interproximal bone level at the autotransplanted molar was equal to that of the neighboring teeth. Cone beam computed tomography showed bone at the labial aspect of the transplant. The eruption of the autotransplanted tooth stimulated vertical alveolar bone development and repaired the bone defect. Additionally, there was closure of the posterior open bite that was initially present at the ankylosed molar site.

  1. An automatic early stage alveolar-bone-resorption evaluation method on digital dental panoramic radiographs

    Science.gov (United States)

    Zhang, Min; Katsumata, Akitoshi; Muramatsu, Chisako; Hara, Takeshi; Suzuki, Hiroki; Fujita, Hiroshi

    2014-03-01

    Periodontal disease is a kind of typical dental diseases, which affects many adults. The presence of alveolar bone resorption, which can be observed from dental panoramic radiographs, is one of the most important signs of the progression of periodontal disease. Automatically evaluating alveolar-bone resorption is of important clinic meaning in dental radiology. The purpose of this study was to propose a novel system for automated alveolar-bone-resorption evaluation from digital dental panoramic radiographs for the first time. The proposed system enables visualization and quantitative evaluation of alveolar bone resorption degree surrounding the teeth. It has the following procedures: (1) pre-processing for a test image; (2) detection of tooth root apices with Gabor filter and curve fitting for the root apex line; (3) detection of features related with alveolar bone by using image phase congruency map and template matching and curving fitting for the alveolar line; (4) detection of occlusion line with selected Gabor filter; (5) finally, evaluation of the quantitative alveolar-bone-resorption degree in the area surrounding teeth by simply computing the average ratio of the height of the alveolar bone and the height of the teeth. The proposed scheme was applied to 30 patient cases of digital panoramic radiographs, with alveolar bone resorption of different stages. Our initial trial on these test cases indicates that the quantitative evaluation results are correlated with the alveolar-boneresorption degree, although the performance still needs further improvement. Therefore it has potential clinical practicability.

  2. Alveolar type II epithelial cell dysfunction in rat experimental hepatopulmonary syndrome (HPS.

    Directory of Open Access Journals (Sweden)

    Wenli Yang

    Full Text Available The hepatopulmonary syndrome (HPS develops when pulmonary vasodilatation leads to abnormal gas exchange. However, in human HPS, restrictive ventilatory defects are also observed supporting that the alveolar epithelial compartment may also be affected. Alveolar type II epithelial cells (AT2 play a critical role in maintaining the alveolar compartment by producing four surfactant proteins (SPs, SP-A, SP-B, SP-C and SP-D which also facilitate alveolar repair following injury. However, no studies have evaluated the alveolar epithelial compartment in experimental HPS. In this study, we evaluated the alveolar epithelial compartment and particularly AT2 cells in experimental HPS induced by common bile duct ligation (CBDL. We found a significant reduction in pulmonary SP production associated with increased apoptosis in AT2 cells after CBDL relative to controls. Lung morphology showed decreased mean alveolar chord length and lung volumes in CBDL animals that were not seen in control models supporting a selective reduction of alveolar airspace. Furthermore, we found that administration of TNF-α, the bile acid, chenodeoxycholic acid, and FXR nuclear receptor activation (GW4064 induced apoptosis and impaired SP-B and SP-C production in alveolar epithelial cells in vitro. These results imply that AT2 cell dysfunction occurs in experimental HPS and is associated with alterations in the alveolar epithelial compartment. Our findings support a novel contributing mechanism in experimental HPS that may be relevant to humans and a potential therapeutic target.

  3. Oxidative Stress, Cell Death, and Other Damage to Alveolar Epithelial Cells Induced by Cigarette Smoke

    Directory of Open Access Journals (Sweden)

    Nagai A

    2003-09-01

    Full Text Available Abstract Cigarette smoking is a major risk factor in the development of various lung diseases, including pulmonary emphysema, pulmonary fibrosis, and lung cancer. The mechanisms of these diseases include alterations in alveolar epithelial cells, which are essential in the maintenance of normal alveolar architecture and function. Following cigarette smoking, alterations in alveolar epithelial cells induce an increase in epithelial permeability, a decrease in surfactant production, the inappropriate production of inflammatory cytokines and growth factors, and an increased risk of lung cancer. However, the most deleterious effect of cigarette smoke on alveolar epithelial cells is cell death, i.e., either apoptosis or necrosis depending on the magnitude of cigarette smoke exposure. Cell death induced by cigarette smoke exposure can largely be accounted for by an enhancement in oxidative stress. In fact, cigarette smoke contains and generates many reactive oxygen species that damage alveolar epithelial cells. Whether apoptosis and/or necrosis in alveolar epithelial cells is enhanced in healthy cigarette smokers is presently unclear. However, recent evidence indicates that the apoptosis of alveolar epithelial cells and alveolar endothelial cells is involved in the pathogenesis of pulmonary emphysema, an important cigarette smoke-induced lung disease characterized by the loss of alveolar structures. This review will discuss oxidative stress, cell death, and other damage to alveolar epithelial cells induced by cigarette smoke.

  4. Relationship of Anterior Alveolar Dimensions with Mandibular Divergence in Class I Malocclusion – A Cephalometric Study

    Science.gov (United States)

    Korath, Vinoth Abraham; Nagachandran; Vijayalakshmi, Devaki; Parameswaran, Ratna; Raman, Priya; Sunitha, Catherine; Khan, Nayeemullah

    2016-01-01

    Introduction One of the major limiting factors in retraction of proclined teeth is the width of the alveolus both in maxilla and mandible. Aim The objective of this study was to assess the maxillary and mandibular anterior alveolar dimensions and to correlate with mandibular divergence in Class I bi-dento-alveolar protrusion patients. Materials and Methods Pretreatment lateral cephalograms (n=88) were analysed using a composite analysis with cephalometric software. Both maxillary and mandibular anterior alveolar widths and heights were measured and correlated with mandibular divergence. One-way analysis (ANOVA) and Pearson correlation test were used to compare and establish the significance between groups. Results Segregation of the data based on variation in the bi-cortical widths and heights showed that lesser alveolar widths and greater alveolar heights were associated with the high angled subjects and greater alveolar widths and lesser heights were associated with low angled subjects. Conclusion Patients with hyperdivergent mandible exhibited thin anterior alveolar width and greater alveolar height whereas low angled subjects had wider alveolar width and lesser alveolar height. Orthodontic treatment plan for retraction of anterior teeth must be based on these differences caused by variations in mandibular divergence. PMID:27437356

  5. Lateral ridge augmentation with Bio-Oss alone or Bio-Oss mixed with particulate autogenous bone graft: a systematic review.

    Science.gov (United States)

    Aludden, H C; Mordenfeld, A; Hallman, M; Dahlin, C; Jensen, T

    2017-08-01

    The objective of this systematic review was to test the hypothesis of no difference in implant treatment outcomes when using Bio-Oss alone or Bio-Oss mixed with particulate autogenous bone grafts for lateral ridge augmentation. A search of the MEDLINE, Cochrane Library, and Embase databases in combination with a hand-search of relevant journals was conducted. Human studies published in English from 1 January 1990 to 1 May 2016 were included. The search provided 337 titles and six studies fulfilled the inclusion criteria. Considerable variation prevented a meta-analysis from being performed. The two treatment modalities have never been compared within the same study. Non-comparative studies demonstrated a 3-year implant survival of 96% with 50% Bio-Oss mixed with 50% autogenous bone graft. Moreover, Bio-Oss alone or Bio-Oss mixed with autogenous bone graft seems to increase the amount of newly formed bone as well as the width of the alveolar process. Within the limitations of this systematic review, lateral ridge augmentation with Bio-Oss alone or in combination with autogenous bone graft seems to induce newly formed bone and increase the width of the alveolar process, with high short-term implant survival. However, long-term studies comparing the two treatment modalities are needed before final conclusions can be drawn. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Espessura do processo alveolar da região anterior da maxila e mandíbula em pacientes com discrepância óssea ântero-posterior Thickness of the alveolar process in the anterior region of the maxilla and mandible of patients with antero-posterior discrepancy

    Directory of Open Access Journals (Sweden)

    Rachel de Mattos Garcia

    2005-10-01

    Full Text Available O presente estudo teve como objetivo avaliar a espessura do processo alveolar da região anterior da maxila e mandíbula em pacientes portadores de discrepâncias ântero-posteriores. Após a seleção de telerradiografias laterais de cinqüenta e dois pacientes entre idades de sete e 13 anos, mediu-se a espessura do processo alveolar da região anterior da maxila e mandíbula. Todos os pacientes apresentavam o ângulo do plano mandibular entre vinte e trinta graus e discrepância óssea ântero-posterior entre maxila e mandíbula. Após a análise estatística (teste qui-quadrado observou-se que não houve dependência entre a espessura do processo alveolar da maxila e mandíbula e a idade do paciente. Todavia houve dependência entre o tipo de má oclusão e a espessura de osso vestibular na região anterior da maxila. Os pacientes portadores de má oclusão de Classe III apresentaram maior porcentagem de redução de osso vestibular da região anterior da maxila quando comparados aos pacientes Classe II. Os pacientes com tendência ao crescimento vertical apresentaram a dimensão reduzida de osso lingual da maxila e osso vestibular da mandíbula.The purpose of the present study was to assess the thickness of the alveolar process on the anterior region of maxilla and mandible of patients with antero-posterior discrepancy. The thickness of the alveolar process on the anterior regions of maxilla and mandible was measured by lateral cephalograms from fifty two patients with ages between seven to thirteen years. All the patients included on this study had the mandibular plan angle between 20 and 30 degrees and antero-posterior bone discrepancy between maxilla and mandible. The statistical analysis (Chi-square test revealed independence between the thickness of the maxilla and mandible alveolar process and the patient age. However, a statistical dependence was found between the type of the malocclusion and the thickness of the buccal bone on

  7. Axial seamount: An active ridge axis volcano on the Central Juan De Fuca Ridge

    Science.gov (United States)

    Johnson, H. Paul; Embley, Robert W.

    1990-08-01

    Axial Seamount (some of the manuscripts in this special section refer to the edifice with the more precise name of "Axial Volcano"), a large ridge axis volcano, is located on the central segment of the Juan de Fuca Ridge approximately 250 nautical miles west of the Washington/Oregon/British Columbia coast. Currently both volcanically and hydrothermally active, Axial lies directly at the intersection of the Cobb-Eickelberg Seamount Chain and the Juan de Fuca Ridge (Figure 1). The volcanic activity associated with the seamount formation strongly interacts with, and is affected by, the normal seafloor spreading processes at the intersection. Because of this unique geologic setting, its proximity to west coast ports and oceanographie institutions, and its shallow depth, Axial has become the focus of a large number of scientific investigations over the past decade.

  8. Elemental analysis of lung tissue particles and intracellular iron content of alveolar macrophages in pulmonary alveolar proteinosis

    Directory of Open Access Journals (Sweden)

    Ohkubo Takeru

    2011-06-01

    Full Text Available Abstract Background Pulmonary alveolar proteinosis (PAP is a rare disease occurred by idiopathic (autoimmune or secondary to particle inhalation. The in-air microparticle induced X-ray emission (in-air micro-PIXE system performs elemental analysis of materials by irradiation with a proton microbeam, and allows visualization of the spatial distribution and quantitation of various elements with very low background noise. The aim of this study was to assess the secondary PAP due to inhalation of harmful particles by employing in-air micro-PIXE analysis for particles and intracellular iron in parafin-embedded lung tissue specimens obtained from a PAP patient comparing with normal lung tissue from a non-PAP patient. The iron inside alveolar macrophages was stained with Berlin blue, and its distribution was compared with that on micro-PIXE images. Results The elements composing particles and their locations in the PAP specimens could be identified by in-air micro-PIXE analysis, with magnesium (Mg, aluminum (Al, silicon (Si, phosphorus (P, sulfur (S, scandium (Sc, potassium (K, calcium (Ca, titanium (Ti, chromium (Cr, copper (Cu, manganase (Mn, iron (Fe, and zinc (Zn being detected. Si was the major component of the particles. Serial sections stained by Berlin blue revealed accumulation of sideromacrophages that had phagocytosed the particles. The intracellular iron content of alveolar macrophage from the surfactant-rich area in PAP was higher than normal lung tissue in control lung by both in-air micro-PIXE analysis and Berlin blue staining. Conclusion The present study demonstrated the efficacy of in-air micro-PIXE for analyzing the distribution and composition of lung particles. The intracellular iron content of single cells was determined by simultaneous two-dimensional and elemental analysis of paraffin-embedded lung tissue sections. The results suggest that secondary PAP is associated with exposure to inhaled particles and accumulation of iron in

  9. Mechanism of action and morphologic changes in the alveolar bone in response to selective alveolar decortication-facilitated tooth movement.

    Science.gov (United States)

    Baloul, S Susan; Gerstenfeld, Louis C; Morgan, Elise F; Carvalho, Roberto S; Van Dyke, Thomas E; Kantarci, Alpdogan

    2011-04-01

    The aim of this study was to test if corticotomy-induced osteoclastogenesis and bone remodeling underlie orthodontic tooth movement and how selective alveolar decortication enhances the rate of tooth movement. A total of 114 Sprague-Dawley rats were included in 3 treatment groups: selective alveolar decortication alone (SADc); tooth movement alone (TM); and "combined" therapy (SADc + TM). Surgery was performed around the buccal and palatal aspects of the left maxillary first molar tooth and included 5 decortication dots on each side. Tooth movement was performed on the first molar using a 25-g Sentalloy spring. Measurements were done at baseline (day 0: no treatment rendered) and on days 3, 7, 14, 21, 28 and 42. Microcomputed tomography, Faxitron analyses, and quantitative real-time polymerase chain reaction (q-PCR) of expressed mRNAs were used to assess changes. The combined group showed increased tooth movement (P = 0.04) at 7 days compared with the tooth movement group with significantly decreased bone volume (62%; P = 0.016) and bone mineral content (63%; P = 0.015). RNA markers of osteoclastic cells and key osteoclastic regulators (M-CSF [macrophage colony-stimulating factor], RANKL [receptor activator of nuclear factor kappa-B ligand], OPG [osteoprotegerin], calcitonin receptor [CTR], TRACP-5b [tartrate-resistant acid phosphatase 5b], cathepsin K [Ctsk]) all showed expression indicating increased osteoclastogenesis in the combined group. RNA markers of osteoblastic cells (OPN [osteopontin], BSP [bone sialoprotein], OCN [osteocalcin]) also showed increased anabolic activity in response to the combination of alveolar decortication and tooth movement. The data suggest that the alveolar decortication enhances the rate of tooth movement during the initial tooth displacement phase; this results in a coupled mechanism of bone resorption and bone formation during the earlier stages of treatment, and this mechanism underlies the rapid orthodontic tooth movement

  10. Volcanism and hydrothermalism on a hotspot-influenced ridge: Comparing Reykjanes Peninsula and Reykjanes Ridge, Iceland

    Science.gov (United States)

    Pałgan, Dominik; Devey, Colin W.; Yeo, Isobel A.

    2017-12-01

    Current estimates indicate that the number of high-temperature vents (one of the primary pathways for the heat extraction from the Earth's mantle) - at least 1 per 100 km of axial length - scales with spreading rate and should scale with crustal thickness. But up to present, shallow ridge axes underlain by thick crust show anomalously low incidences of high-temperature activity. Here we compare the Reykjanes Ridge, an abnormally shallow ridge with thick crust and only one high-temperature vent known over 900 km axial length, to the adjacent subaerial Reykjanes Peninsula (RP), which is characterized by high-temperature geothermal sites confined to four volcanic systems transected by fissure swarms with young (Holocene) volcanic activity, multiple faults, cracks and fissures, and continuous seismic activity. New high-resolution bathymetry (gridded at 60 m) of the Reykjanes Ridge between 62°30‧N and 63°30‧N shows seven Axial Volcanic Ridges (AVR) that, based on their morphology, geometry and tectonic regime, are analogues for the volcanic systems and fissure swarms on land. We investigate in detail the volcano-tectonic features of all mapped AVRs and show that they do not fit with the previously suggested 4-stage evolution model for AVR construction. Instead, we suggest that AVR morphology reflects the robust or weak melt supply to the system and two (or more) eruption mechanisms may co-exist on one AVR (in contrast to 4-stage evolution model). Our interpretations indicate that, unlike on the Reykjanes Peninsula, faults on and around AVRs do not cluster in orientation domains but all are subparallel to the overall strike of AVRs (orthogonal to spreading direction). High abundance of seamounts shows that the region centered at 62°47‧N and 25°04‧W (between AVR-5 and -6) is volcanically robust while the highest fault density implies that AVR-1 and southern part of AVR-6 rather undergo period of melt starvation. Based on our observations and interpretations we

  11. Vertical Protocol Composition

    DEFF Research Database (Denmark)

    Groß, Thomas; Mödersheim, Sebastian Alexander

    2011-01-01

    composition, and it is truly commonplace in today’s communication with the diversity of VPNs and secure browser sessions. In fact, it is normal that we have several layers of secure channels: For instance, on top of a VPN-connection, a browser may establish another secure channel (possibly with a different...... end point). Even using the same protocol several times in such a stack of channels is not unusual: An application may very well establish another TLS channel over an established one. We call this selfcomposition. In fact, there is nothing that tells us that all these compositions are sound, i.......e., that the combination cannot introduce attacks that the individual protocols in isolation do not have. In this work, we prove a composability result in the symbolic model that allows for arbitrary vertical composition (including self-composition). It holds for protocols from any suite of channel and application...

  12. Vertical cavity laser

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention provides a vertical cavity laser comprising a grating layer comprising an in-plane grating, the grating layer having a first side and having a second side opposite the first side and comprising a contiguous core grating region having a grating structure, wherein an index......, an index of refraction of the second low-index layer or air being less than 2; and a thickness of the cap layer and a thickness of the grating layer, and a pitch and a duty cycle of the grating structure are selected to obtain a resonance having a free-space resonance wavelength in the interval 300 nm to 3...... microns, the cap layer comprises an active region configured to generate or absorb photons at the free-space resonance wavelength by stimulated emission or absorption when a sufficient forward or reverse bias voltage is applied across the active region, a thickness of the first low-index layer is less...

  13. Constraints on dynamic topography from asymmetric subsidence of the mid-ocean ridges

    Science.gov (United States)

    Watkins, C. Evan; Conrad, Clinton P.

    2018-02-01

    Stresses from mantle convection deflect Earth's surface vertically, producing dynamic topography that is important for continental dynamics and sea-level change but difficult to observe due to overprinting by isostatic topography. For long wavelengths (∼104 km), the amplitude of dynamic topography is particularly uncertain, with mantle flow models typically suggesting larger amplitudes (>1000 m) than direct observations. Here we develop a new constraint on the amplitude of long-wavelength dynamic topography by examining asymmetries in seafloor bathymetry across mid-ocean ridges. We compare bathymetric profiles across the Mid-Atlantic Ridge (MAR) and the East Pacific Rise (EPR) and we find that the South American flank of both ridges subsides faster than its opposing flank. This pattern is consistent with dynamic subsidence across South America, supported by downwelling in the lower mantle. To constrain the amplitude of dynamic topography, we compare bathymetric profiles across both ridges after correcting bathymetry for several different models of dynamic topography with varying amplitudes and spatial patterns. We find that long-wavelength dynamic topography with an amplitude of only ∼500 m explains the observed asymmetry of the MAR. A similar model can explain EPR asymmetry but is complicated by additional asymmetrical topography associated with tectonic, crustal thickness, and/or asthenospheric temperature asymmetries across the EPR. After removing 500 m of dynamic topography, both the MAR and EPR exhibit a slower seafloor subsidence rate (∼280-290 m/Myr1/2) than previously reported. Our finding of only ∼500 m of long-wavelength dynamic topography may indicate the importance of thermochemical convection and/or large viscosity variations for lower mantle dynamics.

  14. Active positioning of vent larvae at a mid-ocean ridge

    Science.gov (United States)

    Mullineaux, L. S.; McGillicuddy, D. J.; Mills, S. W.; Kosnyrev, V. K.; Thurnherr, A. M.; Ledwell, J. R.; Lavelle, J. W.

    2013-08-01

    The vertical position of larvae of vent species above a mid-ocean ridge potentially has a strong effect on their dispersal. Larvae may be advected upward in the buoyant vent plume, or move as a consequence of their buoyancy or by active swimming. Alternatively, they may be retained near the bottom by the topography of the axial trough, or by downward swimming. At vents near 9°50'N on the axis of the East Pacific Rise, evidence for active larval positioning was detected in a comparison between field observations of larvae in the plankton in 2006 and 2007 and distributions of non-swimming larvae in a two-dimensional bio-physical model. In the field, few vent larvae were collected at the level of the neutrally buoyant plume (~75 m above the bottom); their relative abundances at that height were much lower than those of simulated larvae from a near-bottom release in the model. This discrepancy was observed for many vent species, particularly gastropods, suggesting that they may actively remain near the bottom by sinking or swimming downward. Near the seafloor, larval abundance decreased from the ridge axis to 1000 m off axis much more strongly in the observations than in the simulations, again pointing to behavior as a potential regulator of larval transport. We suspect that transport off axis was reduced by downward-moving behavior, which positioned larvae into locations where they were isolated from cross-ridge currents by seafloor topography, such as the walls of the axial valley—which are not resolved in the model. Cross-ridge gradients in larval abundance varied between gastropods and polychaetes, indicating that behavior may vary between taxonomic groups, and possibly between species. These results suggest that behaviorally mediated retention of vent larvae may be common, even for species that have a long planktonic larval duration and are capable of long-distance dispersal.

  15. Direct Observation of Ultralow Vertical Emittance using a Vertical Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, Kent

    2015-09-17

    In recent work, the first quantitative measurements of electron beam vertical emittance using a vertical undulator were presented, with particular emphasis given to ultralow vertical emittances [K. P. Wootton, et al., Phys. Rev. ST Accel. Beams, 17, 112802 (2014)]. Using this apparatus, a geometric vertical emittance of 0.9 ± 0.3 pm rad has been observed. A critical analysis is given of measurement approaches that were attempted, with particular emphasis on systematic and statistical uncertainties. The method used is explained, compared to other techniques and the applicability of these results to other scenarios discussed.

  16. Modes of Accretion at Slower Spreading Ocean Ridges

    Science.gov (United States)

    Dick, H. J.

    2010-12-01

    Over two decades of drilling, sampling and seafloor mapping at oceanic core complexes in the Atlantic and Indian Oceans has overturned the conventional models for accretion of the ocean crust. Today crustal architecture at slow and ultraslow spreading ridges is viewed as highly varied, ranging from crustal sections that resemble the Penrose model of lavas, dikes and gabbros believed to characterize most Pacific crust, sections comprised of lava flows and scattered dikes overlying small intrusions in serpentinized mantle, to direct emplacement of serpentinized mantle peridotite to the seafloor as originally envisaged by Harry Hess. The concept of large magma chambers, as originally postulated by the Penrose model gave way early on due to a lack of seismic evidence and as the more direct result of drilling long gabbro sections consisting of innumerable small intrusions in oceanic core complexes at Hole 735B on the SWIR and in the MARK area at Sites 921-924. Evidence for large scale upward melt percolation through the lower crust by permeable flow, best seen in ODP Hole 735B, mechanical rafting of hybridized mantle rock from the crust-mantle boundary, first identified in IODP Hole U1309D, and evidence for vertical rafting of small crustal intrusions as documented by mapping and sampling high-temperature dynamically-deformed gabbros intercalated with undeformed greenschist-facies dikes at Atlantis Bank and Kane Megamullion, all represent previously unsuspected major modes of mass transfer and accretion of the lower crust. Thus, at slower spreading ridges, corner flow of the lithosphere may extend through the zone of intrusion up to the base of the sheeted dikes rather than having the crust built by simple intrusion over the upwelling mantle. These observations have major implications for mass transfer between the deep earth, crust, oceans, and atmospheres. Previously, it has been supposed that the bulk composition of the crust would be equal to that of primary magmas

  17. Diminished activity of tartrate resistant acid phosphatase in alveolar macrophages from patients with active sarcoidosis.

    OpenAIRE

    Barth, J.; Kreipe, H.; Kiemle-Kallee, J; Radzun, H.J.; Parwaresch, M R; Petermann, W.

    1988-01-01

    Alveolar macrophages differ from their percursors in blood, monocytes, by expressing strong activity of the tartrate resistant variant of acid phosphatase (TAcP). A study was carried out to analyse the expression of this enzyme cytochemical marker by alveolar macrophages from bronchoalveolar lavage cells from 34 patients with sarcoidosis and 12 control subjects. Alveolar macrophages from control subjects displayed a strong and homogeneous staining pattern and only 0.1% of cells were negative ...

  18. Microsurgical treatment of medial sphenoid ridge meningioma

    Directory of Open Access Journals (Sweden)

    Wei-qi HE

    2011-02-01

    Full Text Available Objective To explore the microsurgical technique of medial sphenoid ridge meningioma resectional therapy.Methods The clinical data were retrospectively analyzed of 29 patients(13 males and 16 females;aged 18-68 years with average of 42 years;duration of disease was 5 months to 8 years,averaged 28 months with medial sphenoidal ridge meningioma and admitted from Jan.2005 to Jan.2010.The anatomical relationship of the tumor to surrounding structures was assessed intraoperatively,the tumor was then completely resected through cutting off the tumor supplying vessels,shrinking the tumor volume and separating the tumors from adjacent vessels and nerves.All the patients were followed up for 4 months to 4 years.Results Of the 29 cases,20 got total tumor removal,7 got subtotal and 2 got partial tumor removal.Of the 20 patients with obviously preoperative visual impairment,12 were obviously relieved,6 showed no improvement and 2 got symptoms aggravation.Hemiplegia occurred in 2 cases and oculomoter nerve palsy in 6 cases.There was no death after surgery.A 6 months to 4 years follow-up showed that no recurrence was found in 27 patients with tumor resection level of Simpson I and II,2 patients with tumor resection level of Simpson III received postoperative radiotherapy or gamma knife surgery,and 1 recurred and received reoperation.Conclusions Fine intraoperative assessment of the anatomical relationship of the tumor to surrounding structures,separating and excising tumor according to the assessed result is the key of medial sphenoid ridge meningioma resection,and the tumor resection is favorable to visual rehabilitation and tumor control.

  19. Effects of Human Adipose-derived Stem Cells and Platelet-rich Plasma on Healing Response of Canine Alveolar Surgical Bone Defects

    Directory of Open Access Journals (Sweden)

    Reyhaneh Shafieian

    2017-11-01

    Full Text Available Background: Due to the known disadvantages of autologous bone grafting, tissue engineering approaches have become an attractive method for ridge augmentation in dentistry. To the best of our knowledge, this is the first study conducted to evaluate the potential therapeutic capacity of PRP-assisted hADSCs seeded on HA/TCP granules on regenerative healing response of canine alveolar surgical bone defects. This could offer a great advantage to alternative approaches of bone tissue healing-induced therapies at clinically chair-side procedures. Methods: Cylindrical through-and-through defects were drilled in the mandibular plate of 5 mongrel dogs and filled randomly as following: I- autologous crushed mandibular bone, II- no filling material, III- HA/TCP granules in combination with PRP, and IV- PRP-enriched hADSCs seeded on HA/TCP granules. After the completion of an 8-week period of healing, radiographic, histological and histomorphometrical analysis of osteocyte number, newly-formed vessels and marrow spaces were used for evaluation and comparison of the mentioned groups. Furthermore, the buccal side of mandibular alveolar bone of every individual animal was drilled as normal control samples (n=5. Results: Our results revealed that hADSCs subcultured on HA/TCP granules in combination with PRP significantly promoted bone tissue regeneration as compared with those defects treated only with PRP and HA/TCP granules (P

  20. Oak Ridge TNS Program: a status report

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, M

    1978-01-01

    The Oak Ridge TNS activities have been directed at characterizing the design space between TFTR and EPR with a fundamental emphasis on higher beta plasma systems than previously projected, i.e., anti ..beta.. approximately 5 to 10% as compared to 1 to 3%. Based on the results of the FY 1977 System Studies, our activities this year are directed toward preconceptual design with particular emphasis placed on reducing the technological requirements through innovations in plasma engineering. Examples of the new innovations include microwave assisted start up to reduce power requirements and a reduced TF ripple constraint by more refined ripple loss calculations, to increase engineering feasibility through simpler, more maintainable designs.

  1. Oak Ridge Leadership Computing Facility Position Paper

    Energy Technology Data Exchange (ETDEWEB)

    Oral, H Sarp [ORNL; Hill, Jason J [ORNL; Thach, Kevin G [ORNL; Podhorszki, Norbert [ORNL; Klasky, Scott A [ORNL; Rogers, James H [ORNL; Shipman, Galen M [ORNL

    2011-01-01

    This paper discusses the business, administration, reliability, and usability aspects of storage systems at the Oak Ridge Leadership Computing Facility (OLCF). The OLCF has developed key competencies in architecting and administration of large-scale Lustre deployments as well as HPSS archival systems. Additionally as these systems are architected, deployed, and expanded over time reliability and availability factors are a primary driver. This paper focuses on the implementation of the Spider parallel Lustre file system as well as the implementation of the HPSS archive at the OLCF.

  2. Environmental baseline survey report for West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge and parcel 21D in the vicinity of the East Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    King, David A. [Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program

    2012-11-29

    This environmental baseline survey (EBS) report documents the baseline environmental conditions of five land parcels located near the U.S. Department of Energy?s (DOE?s) East Tennessee Technology Park (ETTP), including West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge, and Parcel 21d. Preparation of this report included the detailed search of federal government records, title documents, aerial photos that may reflect prior uses, and visual inspections of the property and adjacent properties. Interviews with current employees involved in, or familiar with, operations on the real property were also conducted to identify any areas on the property where hazardous substances and petroleum products, or their derivatives, and acutely hazardous wastes may have been released or disposed. In addition, a search was made of reasonably obtainable federal, state, and local government records of each adjacent facility where there has been a release of any hazardous substance or any petroleum product or their derivatives, including aviation fuel and motor oil, and which is likely to cause or contribute to a release of any hazardous substance or any petroleum product or its derivatives, including aviation fuel or motor oil, on the real property. A radiological survey and soil/sediment sampling was conducted to assess baseline conditions of Parcel 21d that were not addressed by the soils-only no-further-investigation (NFI) reports. Groundwater sampling was also conducted to support a Parcel 21d decision. Based on available data West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, and West Pine Ridge are not impacted by site operations and are not subject to actions per the Federal Facility Agreement (FFA). This determination is supported by visual inspections, records searches and interviews, groundwater conceptual modeling, approved NFI reports, analytical data, and risk analysis results. Parcel 21d data, however, demonstrate impacts from site

  3. Perawatan Ortodonti pada Kasus Mutilasi dengan Resorpsi Tulang Alveolar dan Resesi Gingiva (Laporan Kasus

    Directory of Open Access Journals (Sweden)

    Retno Widayati

    2015-09-01

    Full Text Available In the mutilated case in adults, generally malocclusion is often accompanied by less support of periodontal tissues, such as alveolar bone resorption and gingival recession. The treatment of orthodontic is to arrange the teeth into good position and good occlusion, but is widely known to increase the alveolar bone resorption. In handling such case, orthodontist needs to look at factors which do not increase existing alveolar bone resorption and gingival recession. In this case report, it will be reported orthodontic treatment on mutilated case which are accompanied by alveolar bone resorption and gingival recession on a patient of 45 years and 4 months of age.

  4. Vertical allometry: fact or fiction?

    Science.gov (United States)

    Mahmood, Iftekhar; Boxenbaum, Harold

    2014-04-01

    In pharmacokinetics, vertical allometry is referred to the clearance of a drug when the predicted human clearance is substantially higher than the observed human clearance. Vertical allometry was initially reported for diazepam based on a 33-fold higher human predicted clearance than the observed human clearance. In recent years, it has been found that many other drugs besides diazepam, can be classified as drugs which exhibit vertical allometry. Over the years, many questions regarding vertical allometry have been raised. For example, (1) How to define and identify the vertical allometry? (2) How much difference should be between predicted and observed human clearance values before a drug could be declared 'a drug which follows vertical allometry'? (3) If somehow one can identify vertical allometry from animal data, how this information can be used for reasonably accurate prediction of clearance in humans? This report attempts to answer the aforementioned questions. The concept of vertical allometry at this time remains complex and obscure but with more extensive works one can have better understanding of 'vertical allometry'. Published by Elsevier Inc.

  5. Comprehensive integrated planning: A process for the Oak Ridge Reservation, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The Oak Ridge Comprehensive Integrated Plan is intended to assist the US Department of Energy (DOE) and contractor personnel in implementing a comprehensive integrated planning process consistent with DOE Order 430.1, Life Cycle Asset Management and Oak Ridge Operations Order 430. DOE contractors are charged with developing and producing the Comprehensive Integrated Plan, which serves as a summary document, providing information from other planning efforts regarding vision statements, missions, contextual conditions, resources and facilities, decision processes, and stakeholder involvement. The Comprehensive Integrated Plan is a planning reference that identifies primary issues regarding major changes in land and facility use and serves all programs and functions on-site as well as the Oak Ridge Operations Office and DOE Headquarters. The Oak Ridge Reservation is a valuable national resource and is managed on the basis of the principles of ecosystem management and sustainable development and how mission, economic, ecological, social, and cultural factors are used to guide land- and facility-use decisions. The long-term goals of the comprehensive integrated planning process, in priority order, are to support DOE critical missions and to stimulate the economy while maintaining a quality environment.

  6. From tides to mixing along the Hawaiian ridge.

    Science.gov (United States)

    Rudnick, Daniel L; Boyd, Timothy J; Brainard, Russell E; Carter, Glenn S; Egbert, Gary D; Gregg, Michael C; Holloway, Peter E; Klymak, Jody M; Kunze, Eric; Lee, Craig M; Levine, Murray D; Luther, Douglas S; Martin, Joseph P; Merrifield, Mark A; Moum, James N; Nash, Jonathan D; Pinkel, Robert; Rainville, Luc; Sanford, Thomas B

    2003-07-18

    The cascade from tides to turbulence has been hypothesized to serve as a major energy pathway for ocean mixing. We investigated this cascade along the Hawaiian Ridge using observations and numerical models. A divergence of internal tidal energy flux observed at the ridge agrees with the predictions of internal tide models. Large internal tidal waves with peak-to-peak amplitudes of up to 300 meters occur on the ridge. Internal-wave energy is enhanced, and turbulent dissipation in the region near the ridge is 10 times larger than open-ocean values. Given these major elements in the tides-to-turbulence cascade, an energy budget approaches closure.

  7. Multiple expressions of plume-ridge interaction at the Galapagos: Volcanic lineaments and ridge jumps

    Science.gov (United States)

    Mittelstaedt, E. L.; Soule, S. A.; Harpp, K. S.; Fornari, D. J.

    2011-12-01

    Despite significant evidence for communication between an upwelling mantle plume beneath the Galápagos Archipelago (GA) and the nearby Galápagos Spreading Center (GSC), little is known about the dynamics of the interaction between the ridge and the hotspot. We use new bathymetry, sidescan sonar, magnetic, subbottom seismic, and gravity data from the FLAMINGO cruise (MV1007) to address the mechanism of plume-ridge interaction in the Northern Galápagos Volcanic Province (NGVP), a region centered on the 90° 50'W Galápagos transform fault (GTF). West of the GTF, the Nazca Plate is dominated by numerous seamounts aligned in 3 volcanic lineaments. Volumetrically, the lineaments are composed of ~1500 km3 of erupted lavas. Faulting patterns and seamount elongations suggest that the locations and orientations of the lineaments may be partly controlled by the lithospheric stress field. In contrast, east of the GTF on the Cocos Plate, there is little evidence of constructional volcanism (~69 km3). However, we observe several linear, nearly ridge-parallel, faulted features separating sediment-filled basins, and two large bathymetric highs with up to 1km of relief. Differences in seafloor west and east of the GTF are also observed in the Residual Mantle Bouguer Anomaly (RMBA). On the Nazca Plate, RMBA lows closely contour the volcanic lineaments with minima at the centers of the largest volcanoes along the Wolf-Darwin Lineament. On the Cocos Plate, the RMBA at a given distance from the ridge axis is generally more negative than at similar locations on the Nazca Plate. In addition, two RMBA lows are observed coincident with the observed bathymetric highs, both of which are slightly elongate in a direction sub-parallel to the Eastern GSC, possibly reflecting a period of increased magma flux along a former ridge axis. Magnetic anomalies reveal a complicated history of plate evolution including a series of ridge jumps since ~3 Ma that result in creation of the GTF. We invert

  8. Human Alveolar Epithelial Cell Injury Induced by Cigarette Smoke

    Science.gov (United States)

    Kosmider, Beata; Messier, Elise M.; Chu, Hong Wei; Mason, Robert J.

    2011-01-01

    Background Cigarette smoke (CS) is a highly complex mixture and many of its components are known carcinogens, mutagens, and other toxic substances. CS induces oxidative stress and cell death, and this cell toxicity plays a key role in the pathogenesis of several pulmonary diseases. Methodology/Principal Findings We studied the effect of cigarette smoke extract (CSE) in human alveolar epithelial type I-like (ATI-like) cells. These are isolated type II cells that are differentiating toward the type I cell phenotype in vitro and have lost many type II cell markers and express type I cell markers. ATI-like cells were more sensitive to CSE than alveolar type II cells, which maintained their differentiated phenotype in vitro. We observed disruption of mitochondrial membrane potential, apoptosis and necrosis that were detected by double staining with acridine orange and ethidium bromide or Hoechst 33342 and propidium iodide and TUNEL assay after treatment with CSE. We also detected caspase 3 and caspase 7 activities and lipid peroxidation. CSE induced nuclear translocation of Nrf2 and increased expression of Nrf2, HO-1, Hsp70 and Fra1. Moreover, we found that Nrf2 knockdown sensitized ATI-like cells to CSE and Nrf2 overexpression provided protection against CSE-induced cell death. We also observed that two antioxidant compounds N-acetylcysteine and trolox protected ATI-like cells against injury by CSE. Conclusions Our study indicates that Nrf2 activation is a major factor in cellular defense of the human alveolar epithelium against CSE-induced toxicity and oxidative stress. Therefore, antioxidant agents that modulate Nrf2 would be expected to restore antioxidant and detoxifying enzymes and to prevent CS-related lung injury and perhaps lessen the development of emphysema. PMID:22163265

  9. Enhanced rifampicin delivery to alveolar macrophages by solid lipid nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Chuan Junlan [West China School of Pharmacy, Sichuan University, Key Laboratory of Drug Targeting and Drug Delivery System, Ministry of Education (China); Li Yanzhen [Tianjin Institute of Pharmaceutical Research, State Key Laboratory of Drug Delivery Technology and Pharmacokinetics (China); Yang Likai; Sun Xun [West China School of Pharmacy, Sichuan University, Key Laboratory of Drug Targeting and Drug Delivery System, Ministry of Education (China); Zhang Qiang [Peking University, State Key Laboratory of Natural and Biomimetic Drugs, School of Pharmaceutical Sciences (China); Gong Tao, E-mail: gongtaoy@126.com; Zhang Zhirong, E-mail: zrzzl@vip.sina.com [West China School of Pharmacy, Sichuan University, Key Laboratory of Drug Targeting and Drug Delivery System, Ministry of Education (China)

    2013-05-15

    The present study aimed at developing a drug delivery system targeting the densest site of tuberculosis infection, the alveolar macrophages (AMs). Rifampicin (RFP)-loaded solid lipid nanoparticles (RFP-SLNs) with an average size of 829.6 {+-} 16.1 nm were prepared by a modified lipid film hydration method. The cytotoxicity of RFP-SLNs to AMs and alveolar epithelial type II cells (AECs) was examined using MTT assays. The viability of AMs and AECs was above 80 % after treatment with RFP-SLNs, which showed low toxicity to both AMs and AECs. Confocal Laser Scanning Microscopy was employed to observe the interaction between RFP-SLNs and both AMs and AECs. After incubating the cells with RFP-SLNs for 2 h, the fluorescent intensity in AMs was more and remained longer (from 0.5 to 12 h) when compared with that in AECs (from 0.5 to 8 h). In vitro uptake characteristics of RFP-SLNs in AMs and AECs were also investigated by detection of intracellular RFP by High performance liquid chromatography. Results showed that RFP-SLNs delivered markedly higher RFP into AMs (691.7 ng/mg in cultured AMs, 662.6 ng/mg in primary AMs) than that into AECs (319.2 ng/mg in cultured AECs, 287.2 ng/mg in primary AECs). Subsequently, in vivo delivery efficiency and the selectivity of RFP-SLNs were further verified in Sprague-Dawley rats. Under pulmonary administration of RFP-SLNs, the amount of RFP in AMs was significantly higher than that in AECs at each time point. Our results demonstrated that solid lipid nanoparticles are a promising strategy for the delivery of rifampicin to alveolar macrophages selectively.

  10. Alveolar hemorrhage and kidney disease: Characteristics and therapy

    Directory of Open Access Journals (Sweden)

    Lilia Ben Fatma

    2013-01-01

    Full Text Available Anti-neutrophil cytoplasmic antibody-associated vasculitis and Goodpasture′s glomerular basement membrane disease are the most common causes of diffuse alveolar hemorrhage, a life-threatening disease. Systemic lupus erythematosus and the antiphospholipid syndrome are also causes of alveolar hemorrhage. We retrospectively reviewed 15 cases of diffuse alveolar hemorrhage (DAH associated with renal diseases. Diagnosis of DAH was based on the presence of bloody bronchoalveolar lavage fluid. There were three men and 12 women, with a mean age of 50.5 years (extremes: 24-74 years. Proteinuria and hematuria were observed, respectively, in 15 and 14 cases. Six patients revealed arterial hypertension. Crescentic glomerulonephritis was diagnosed with kidney biopsies in ten cases. The etiology of renal disease was microscopic polyangiitis (MPA in seven cases, Wegener disease in four cases, systemic lupus erythematous in one case, cryoglobulinemia in one case, myeloma in one case and propyl-thiouracil-induced MPA in one case. Hemoptysis occurred in 14 cases. The mean serum level of hemoglobin was 7.1 g/dL (5.1-10 g/dL. The mean serum creatinine concentration was 7.07 mg/dL (2.4-13.7 mg/dL. Gas exchange was severely compromised, with an oxygenation index <80 mmHg in 14 patients and <60 mmHg in seven patients. Bronchoalveolar lavage was performed in 11 cases, and had positive findings for hemorrhage in all. Methylprednisolone pulses and cyclophosphamide were used in 14 patients. Plasmapheresis was performed in three cases. One patient received cycles of Dexamethasome-Melphalan. Three patients died as a result of DAH. The mortality rate in our study was 20%.

  11. Anesthetic technique for inferior alveolar nerve block: a new approach

    Directory of Open Access Journals (Sweden)

    Dafna Geller Palti

    2011-02-01

    Full Text Available BACKGROUND: Effective pain control in Dentistry may be achieved by local anesthetic techniques. The success of the anesthetic technique in mandibular structures depends on the proximity of the needle tip to the mandibular foramen at the moment of anesthetic injection into the pterygomandibular region. Two techniques are available to reach the inferior alveolar nerve where it enters the mandibular canal, namely indirect and direct; these techniques differ in the number of movements required. Data demonstrate that the indirect technique is considered ineffective in 15% of cases and the direct technique in 13-29% of cases. OBJECTIVE: The aim of this study was to describe an alternative technique for inferior alveolar nerve block using several anatomical points for reference, simplifying the procedure and enabling greater success and a more rapid learning curve. MATERIAL AND METHODS: A total of 193 mandibles (146 with permanent dentition and 47 with primary dentition from dry skulls were used to establish a relationship between the teeth and the mandibular foramen. By using two wires, the first passing through the mesiobuccal groove and middle point of the mesial slope of the distolingual cusp of the primary second molar or permanent first molar (right side, and the second following the oclusal plane (left side, a line can be achieved whose projection coincides with the left mandibular foramen. RESULTS: The obtained data showed correlation in 82.88% of cases using the permanent first molar, and in 93.62% of cases using the primary second molar. CONCLUSION: This method is potentially effective for inferior alveolar nerve block, especially in Pediatric Dentistry.

  12. Alveolar hemorrhage and kidney disease: characteristics and therapy.

    Science.gov (United States)

    Fatma, Lilia Ben; El Ati, Zohra; Lamia, Rais; Aich, Dorra Ben; Madiha, Krid; Wided, Smaoui; Maiz, Hedi Ben; Beji, Somaya; Karim, Zouaghi; Moussa, Fatma Ben

    2013-07-01

    Anti-neutrophil cytoplasmic antibody-associated vasculitis and Goodpasture's glomerular basement membrane disease are the most common causes of diffuse alveolar hemorrhage, a life-threatening disease. Systemic lupus erythematosus and the antiphospholipid syndrome are also causes of alveolar hemorrhage. We retrospectively reviewed 15 cases of diffuse alveolar hemorrhage (DAH) associated with renal diseases. Diagnosis of DAH was based on the presence of bloody bronchoalveolar lavage fluid. There were three men and 12 women, with a mean age of 50.5 years (extremes: 24-74 years). Proteinuria and hematuria were observed, respectively, in 15 and 14 cases. Six patients revealed arterial hypertension. Crescentic glomerulonephritis was diagnosed with kidney biopsies in ten cases. The etiology of renal disease was microscopic polyangiitis (MPA) in seven cases, Wegener disease in four cases, systemic lupus erythematous in one case, cryoglobulinemia in one case, myeloma in one case and propyl-thiouracil-induced MPA in one case. Hemoptysis occurred in 14 cases. The mean serum level of hemoglobin was 7.1 g/dL (5.1-10 g/dL). The mean serum creatinine concentration was 7.07 mg/dL (2.4-13.7 mg/dL). Gas exchange was severely compromised, with an oxygenation index <80 mmHg in 14 patients and <60 mmHg in seven patients. Bronchoalveolar lavage was performed in 11 cases, and had positive findings for hemorrhage in all. Methylprednisolone pulses and cyclophosphamide were used in 14 patients. Plasmapheresis was performed in three cases. One patient received cycles of Dexamethasome-Melphalan. Three patients died as a result of DAH. The mortality rate in our study was 20%.

  13. Comparison of buried sand ridges and regressive sand ridges on the outer shelf of the East China Sea

    Science.gov (United States)

    Wu, Ziyin; Jin, Xianglong; Zhou, Jieqiong; Zhao, Dineng; Shang, Jihong; Li, Shoujun; Cao, Zhenyi; Liang, Yuyang

    2017-06-01

    Based on multi-beam echo soundings and high-resolution single-channel seismic profiles, linear sand ridges in U14 and U2 on the East China Sea (ECS) shelf are identified and compared in detail. Linear sand ridges in U14 are buried sand ridges, which are 90 m below the seafloor. It is presumed that these buried sand ridges belong to the transgressive systems tract (TST) formed 320-200 ka ago and that their top interface is the maximal flooding surface (MFS). Linear sand ridges in U2 are regressive sand ridges. It is presumed that these buried sand ridges belong to the TST of the last glacial maximum (LGM) and that their top interface is the MFS of the LGM. Four sub-stage sand ridges of U2 are discerned from the high-resolution single-channel seismic profile and four strikes of regressive sand ridges are distinguished from the submarine topographic map based on the multi-beam echo soundings. These multi-stage and multi-strike linear sand ridges are the response of, and evidence for, the evolution of submarine topography with respect to sea-level fluctuations since the LGM. Although the difference in the age of formation between U14 and U2 is 200 ka and their sequences are 90 m apart, the general strikes of the sand ridges are similar. This indicates that the basic configuration of tidal waves on the ECS shelf has been stable for the last 200 ka. A basic evolutionary model of the strata of the ECS shelf is proposed, in which sea-level change is the controlling factor. During the sea-level change of about 100 ka, five to six strata are developed and the sand ridges develop in the TST. A similar story of the evolution of paleo-topography on the ECS shelf has been repeated during the last 300 ka.

  14. Behavior of Cell on Vibrating Micro Ridges

    Directory of Open Access Journals (Sweden)

    Haruka Hino

    2015-06-01

    Full Text Available The effect of micro ridges on cells cultured at a vibrating scaffold has been studied in vitro. Several parallel lines of micro ridges have been made on a disk of transparent polydimethylsiloxane for a scaffold. To apply the vibration on the cultured cells, a piezoelectric element was attached on the outside surface of the bottom of the scaffold. The piezoelectric element was vibrated by the sinusoidal alternating voltage (Vp-p < 16 V at 1.0 MHz generated by a function generator. Four kinds of cells were used in the test: L929 (fibroblast connective tissue of C3H mouse, Hepa1-6 (mouse hepatoma, C2C12 (mouse myoblast, 3T3-L1 (mouse fat precursor cells. The cells were seeded on the micro pattern at the density of 2000 cells/cm2 in the medium containing 10% FBS (fetal bovine serum and 1% penicillin/ streptomycin. After the adhesion of cells in several hours, the cells are exposed to the ultrasonic vibration for several hours. The cells were observed with a phase contrast microscope. The experimental results show that the cells adhere, deform and migrate on the scaffold with micro patterns regardless of the ultrasonic vibration. The effects of the vibration and the micro pattern depend on the kind of cells.

  15. Alveolar Hemorrhage After Scuba Diving: A Case Report

    Directory of Open Access Journals (Sweden)

    Ming-Ju Tsai

    2010-07-01

    Full Text Available Self-contained underwater breathing apparatus (scuba diving is increasingly popular in Taiwan. There are few references in the literature regarding pulmonary hemorrhage as the sole manifestation of pulmonary barotrauma in scuba divers, and no study from Taiwan was found in the literature. We present the case of a 25-year-old man who suffered alveolar hemorrhage related to pulmonary barotrauma as a complication of scuba diving. To our knowledge, this is the first case report describing a Taiwanese subject suffering from non-fatal pulmonary hemorrhage after scuba diving.

  16. Is acute alveolar dilation an indicator of strangulation homicide?

    DEFF Research Database (Denmark)

    Klysner, Anne; Lynnerup, Niels; Hougen, Hans Petter

    2011-01-01

    to support this diagnosis. Another purpose was to see how often the gross examination of the lungs was in agreement with the microscopic examination. The material comprised 33 victims of homicidal strangulation above the age of 15 years, autopsied at the Department of Forensic Medicine in Copenhagen between......Some cases of suspected homicidal strangulation are difficult to diagnose if the classical injuries of strangulation are few or lacking. The main purpose of this study was to determine if abnormal distension of alveolar airspaces is present in strangulation deaths and whether or not it can be used...

  17. Depth of Melt Extraction at Mid-Ocean Ridges and Transform Faults

    Science.gov (United States)

    Bai, H.; Montesi, L. G.

    2013-12-01

    Crustal thickness variations at oceanic transform faults are closely related to melt migration and extraction processes beneath mid-ocean ridges. Gregg et al. (2007) have shown that at slow-spreading mid-ocean ridges, transform faults exhibit more positive gravity anomalies than the adjacent spreading centers, indicating relatively thin crust in the transform domain, whereas at intermediate- and fast-spreading ridges, transform faults are characterized by more negative gravity anomalies than the adjacent spreading centers, indicating thick crust in the transform domain. We present numerical models reproducing these observations and infer that melt can be extracted from a depth of 30×5km at fast-slipping transforms. At mid-ocean ridges, melt is generated by decompression of the mantle that rises in response to the divergence of the plates. Subsequent extraction of melt that forms the oceanic crust may be modeled as a three-step process (Montési et al., 2011). 1) Melt moves vertically through buoyancy-driven porous flow enhanced by sub-vertical dissolution channels. 2) Melt accumulates in and travels along a decompaction channel lining a low-permeability barrier at the base of the thermal boundary layer. 3) Melt is extracted to the surface when it enters a melt extraction zone. The melt extraction zone probably reflects structural damage of the lithosphere related to tectonic activity at the plate boundary. Therefore, it may be present at both ridge and transform segments of oceanic spreading centers. This three-step melt extraction process was implemented in Matlab to predict crustal thickness variations associated with three-dimensional models of segmented mid-ocean ridges. Mantle flow and thermal structure are solved in the commercial finite element software COMSOL Multiphysics. Model results demonstrate that the lengths of offset affect the crustal thickness in the transform domain. At short (200 km) offset, conductive cooling dominates and less melt is

  18. Protected Vertices in Motzkin trees

    OpenAIRE

    Van Duzer, Anthony

    2017-01-01

    In this paper we find recurrence relations for the asymptotic probability a vertex is $k$ protected in all Motzkin trees. We use a similar technique to calculate the probabilities for balanced vertices of rank $k$. From this we calculate upper and lower bounds for the probability a vertex is balanced and upper and lower bounds for the expected rank of balanced vertices.

  19. Thorium-230 Stratigraphy of Alpha Ridge Sediment (Arctic Ocean)

    Science.gov (United States)

    Not, C.; Hillaire-Marcel, C.; Polyak, L.; Darby, D.

    2006-12-01

    The Alpha Ridge (central Arctic Ocean) is characterized by very uniform sedimentary deposition essentially linked to vertical particulate rain. This property led us to investigate the behavior of U-series isotopes (Th-230 and Pb-210) in such a setting, i.e., one without significant sedimentary advection. Two sites cored with a 70 cm-long multicorer during the 2005 Hotrax Expedition and located about 20 nautical miles apart and at different water depths (core 11: 2644 m and core 12: 1585 m) were selected for the purpose of this study. Lead-210 profiles are practically identical in both cores, with high activities at the surface (>30 dpm/g), followed by a first minimum at 1 cm (depth. This pattern suggests significant bioturbation, at least down to 8-10 cm, and some Pb-210 diffusion below. At three distinct depths the Th-230 activities are above supported Th-230 values (approx. 1.2 dpm/g): from 0 to 8 cm (with a maximum ranging 25-30 dpm/g), 15 to 20 cm (up to 7 dpm/g) and 26 cm to core bottom (34 and 38 cm, respectively in cores 12 and 11). Here again, despite their large bathymetric difference, the two sites yielded almost identical 230Th-profiles. 230Th-activities are highly correlated with the CaCO3 content, allowing for the decay of the excess-thorium 230 (230Thxs) downcore. Assuming a linear initial relationship between CaCO3 and Th-230xs, the assignment of the lowermost part (below 37 cm) of core 11 to the oxygen isotope 5e seems probable. Maximums in organic carbon and carbonate contents at the base and top of the cores would support this interpretation. In such settings, Th-230 reveals useful data to constrain the stratigraphy of the late Pleistocene sediments, and may compensate for the absence of a viable oxygen isotope stratigraphy.

  20. Preservation of the ridge and sealing of the socket with a combination epithelialised and subepithelial connective tissue graft for management of defects in the buccal bone before insertion of implants: a case series.

    Science.gov (United States)

    Stimmelmayr, Michael; Güth, Jan-Frederik; Iglhaut, Gerhard; Beuer, Florian

    2012-09-01

    Defects in the layer of buccal bone lead to its loss after tooth extractions. This requires hard tissue grafting before implants can be put in place. The aim of this study was to evaluate the stability of hard tissue grafts inserted at the same time as the teeth were extracted. Teeth had to be extracted because of defects in the buccal bone. Extractions were combined with preservation of the ridge using autogenous and artificial bone. A combination epithelialised and subepithelial connective tissue graft was used to seal the socket. Wound healing was assessed and the width of the alveolar crest was measured after hard tissue grafting and during insertion of the implants. We studied 39 patients (20 female, 19 male, mean (SD) age 41 (7.9) years) who had 43 teeth extracted together with preservation of the ridge. One patient failed to attend for placement of the implant. Thirty-nine implants were inserted 5.3 (0.4) months after preservation of the ridge. Two patients developed partial necrosis of the combination graft, but in all other cases primary wound healing was uneventful. In three cases the bone grafts failed to consolidate. The mean (SD) width of the alveolar crest was after bone grafting 6.80 (1.20) mm and during insertion of implants 5.65 (1.50) mm; the mean resorption of the bone grafts was 1.2 (1.1) mm. We conclude that bone grafting to rebuild buccal alveolar defects at the same time that the tooth is extracted, combined with a soft tissue graft to seal the socket, showed promising results and could be an alternative treatment to delayed hard tissue grafting. Copyright © 2011 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  1. Gravidez em paciente com microlitíase alveolar pulmonar grave Pregnancy in a patient with severe pulmonary alveolar microlithiasis

    Directory of Open Access Journals (Sweden)

    José Osmar Bezerra de Souza Filho

    2008-10-01

    Full Text Available A microlitíase alveolar pulmonar (MAP é uma doença rara que atinge ambos os pulmões, caracterizada pela presença de pequenos cálculos (fosfato de cálcio nos espaços alveolares. Relatamos o caso de uma paciente do sexo feminino, de 26 anos, cujo diagnóstico foi confirmado com base nos achados marcantes na radiografia de tórax e tomografia computadorizada de alta resolução. A paciente, gestante de 28 semanas, retornou ao hospital 10 meses após o diagnóstico apresentando insuficiência respiratória hipoxêmica e com distúrbio ventilatório restritivo grave à espirometria. Após completadas 32 semanas e 4 dias de gestação, foi submetida aparto cesariano, com sucesso para mãe e filha. A MAP tem evolução clínica variável. Tem provável caráter autossômico recessivo e associação com história familiar positiva. A etiologia é incerta, e muitos autores especulam que haja um defeito enzimático local responsável pelo acúmulo intra-alveolar de cálcio. Relatos de pacientes com MAP que engravidaram são excepcionais, sendo o presente caso o primeiro descrito no Brasil. O curso dessa doença costuma ser lentamente progressivo, e os pacientes geralmente falecem devido à insuficiência cardiorrespiratória. O presente caso ilustra a necessidade de se oferecer aconselhamento genético e orientações sobre o risco de gravidez às pacientes, especialmente em casos de doença avançada. Atualmente, a única terapia efetiva é o transplante pulmonar.Pulmonary alveolar microlithiasis (PAM is a rare disease that affects both lungs. It is characterized by the presence of small calculi (calcium phosphate within the alveolar spaces. We report the case of a 26-year-old female whose diagnosis was based on characteristic findings on chest X-rays and high-resolution computed tomography scans. The patient, 28 weeks pregnant, was rehospitalized 10 months after the diagnosis, presenting hypoxemic acute respiratory failure and severe restrictive

  2. Carslberg Ridge and Mid-Atlantic Ridge: Slow-spreading Apparent Analogs

    Science.gov (United States)

    Rona, P. A.; Murton, B. J.; Bostrom, K.; Widenfalk, L.; Melson, W. G.; O'Hearn, T.; Cronan, D. S.; Jenkins, W. J.

    2005-12-01

    We compare morphology, tectonics, petrology, and hydrothermal activity of a known section of the Mid-Atlantic Ridge (MAR) between the Kane and Atlantis fracture zones (full multi-beam coverage 21N to 31N) to the lesser known Carlsberg Ridge (CR; limited multi-beam coverage plus satellite altimetry). The CR extends from the Owen Fracture Zone (10N) to the Vityaz Fracture Zone (5S) and spreads at half-rates (~1.2-1.8 cm/yr) similar to the MAR: 1) Morphology: Both ridges exhibit distinct segmentation (primarily sinistral) and axial valleys with high floor to crest relief (range 1122-1771 m). Average lengths of segments (CR: 70 km; MAR: 50 km) and crest-to crest width of the axial valley are greater on the CR (40 km) than MAR (23 km). Axial volcanic ridges form the neovolcanic zone on both ridges, typically 2.6 km wide and 213 m high on the CR. Average water depth near segment centers is greater on the MAR (3933 m) than the CR (3564 m). V-shaped patterns oblique to the spreading axis are present on both ridges. 2) Tectonics: Segments on each ridge are predominantly separated by short-offset (faults generally spaced hundreds of kilometers apart. Bulls-eye Mantle Bouguer Lows (-30 to -50 mgal) are present at centers of spreading segments on both ridges. Metamorphic core complexes of lower crust and upper mantle are present on the MAR section (at fracture zones) and at least at one locality at 58.33E on the CR. 3) Petrology: MORB composition from our 20 stations along the CR fall into the MORB family, with no evidence of hotspot inputs (no excess K or Nb), or extreme fractionation, similar to the MAR section. REE and trace element patterns between 57E and 61E on the CR indicate increasing melt depletion to the northwest, while glasses exhibit a striking systematic increase in MgO (decrease in fractionation) to the northwest and attain among the most primitive composition of any ocean ridge adjacent to the Owen fracture zone (9.93wt percent). Sr, Nd, and Pb isotopic

  3. Advances in multidisciplinary individualized treatment of refractory hepatic alveolar echinococcosis

    Directory of Open Access Journals (Sweden)

    ABUDUAINI Abulizi

    2015-04-01

    Full Text Available Hepatic alveolar echinococcosis (HAE is a zoonotic parasitic disease that seriously threatens the population in western China and compromises patients′ quality of life. With the continuous improvement in radical resection rate in recent years, late-stage HAE patients that were incurable in the past now have the opportunity for radical resection. However, patients who are not suitable candidates for radical resection still suffer from various complications and poor quality of life. Therefore, HAE is still considered a refractory and complex disease. The simple empirical treatment model provided by traditional professional discussion is unable to satisfy the treatment of advanced refractory HAE as it is unable to integrate specialized, standardized clinical skills for diagnosis and treatment. Multidisciplinary individualized treatment (MDT organically integrates the advantages of the available treatment into a reasonable individualized comprehensive treatment regimen. This review summarizes the advances in MDT for HAE as the best option to increase long-term survival, and suggests MDT as the first-line treatment for late-stage refractory hepatic alveolar echinococcosis.

  4. Myogenic potential of human alveolar mucosa derived cells.

    Science.gov (United States)

    Zorin, Vadim L; Pulin, Andrey A; Eremin, Ilya I; Korsakov, Ivan N; Zorina, Alla I; Khromova, Natalia V; Sokova, Olga I; Kotenko, Konstantin V; Kopnin, Pavel B

    2017-03-19

    Difficulties related to the obtainment of stem/progenitor cells from skeletal muscle tissue make the search for new sources of myogenic cells highly relevant. Alveolar mucosa might be considered as a perspective candidate due to availability and high proliferative capacity of its cells. Human alveolar mucosa cells (AMC) were obtained from gingival biopsy samples collected from 10 healthy donors and cultured up to 10 passages. AMC matched the generally accepted multipotent mesenchymal stromal cells criteria and possess population doubling time, caryotype and immunophenotype stability during long-term cultivation. The single myogenic induction of primary cell cultures resulted in differentiation of AMC into multinucleated myotubes. The myogenic differentiation was associated with expression of skeletal muscle markers: skeletal myosin, skeletal actin, myogenin and MyoD1. Efficiency of myogenic differentiation in AMC cultures was similar to that in skeletal muscle cells. Furthermore, some of differentiated myotubes exhibited contractions in vitro. Our data confirms the sufficiently high myogenic potential and proliferative capacity of AMC and their ability to maintain in vitro proliferation-competent myogenic precursor cells regardless of the passage number.

  5. [Bronchoalveolar lavage technique in patients with alveolar proteinosis].

    Science.gov (United States)

    Luengo Martínez A C, M; Muñoz Sánchez, R; Coca Marcos, P; Romero Paredes, R; Bendito Romero, L; Cuenca Nieto-Márquez, V; López Fernández, M

    2001-01-01

    Bronchoalveolar Lavage (BAL) was first described more than fifteen years ago; it is still the treatment of choice in Alveolar Proteinosis. Despite several clinical therapeutic trials, for new therapeutics none of them has achieved the results of Bronchoalveolar Lavage. It has been proved that, not only are they ineffective, but they can also have dangerous consequences. Alveolar proteinosis is a rare lung illness that implies the patient's hypoxia and progressive incapacity, being clinical dyspnea its most frequent characteristic. The BAL. with sodium chloride by filling and emptying the lungs allows to wash the fosfolipid material. That its on the alveoli giving the patient a great improve in short space of time. The aim of our work is to describe the technique used in Bronchoalveolar Lavage as well as the changes that have taken place since the beginning of its practice in our Critical Care Unit for the last fifteen years and so the nursing work that it is on this technic. This procedure needs to be made on a UCI for the need of mechanical ventilation. The time of instance on UCI is 24 h. In our experience we are able to make the BAL. in both lungs in the same session, there are no important complications and there is no need of readmission. We conclude that there is evidence that these treatment is effective.

  6. Alveolar hemorrhage in systemic lupus erythematosus: a cohort review.

    Science.gov (United States)

    Andrade, C; Mendonça, T; Farinha, F; Correia, J; Marinho, A; Almeida, I; Vasconcelos, C

    2016-01-01

    Diffuse alveolar hemorrhage (DAH) is a rare but potentially catastrophic manifestation with a high mortality. Among rheumatologic diseases, it occurs most frequently in patients with systemic lupus erythematosus (SLE) and systemic vasculitis. Despite new diagnostic tools and therapies, it remains a diagnostic and therapeutic challenge. The aim of this work was to characterize the SLE patients with an episode of alveolar hemorrhage followed in our Clinical Immunology Unit (CIU). A retrospective chart review was carried out for all patients with SLE followed in CIU between 1984 and the end of 2013. We reviewed the following data: demographic characteristics, clinical and laboratory data, radiologic investigations, histologic studies, treatment, and outcome. We identified 10 episodes of DAH, corresponding to seven patients, all female. These represent 1.6% of SLE patients followed in our Unit. The age at DAH attack was 42.75 ± 18.9 years. The average time between diagnosis of SLE and the onset of DAH was 7.1 years. Three patients had the diagnosis of SLE and the DAH attack at the same time. Disease activity according to SLEDAI was high, ranging from 15 to 41. All patients were treated with methylprednisolone, 37.5% cyclophosphamide and 28.6% plasmapheresis. The overall mortality rate was 28.6%. © The Author(s) 2015.

  7. Transport Mechanism of Nicotine in Primary Cultured Alveolar Epithelial Cells.

    Science.gov (United States)

    Takano, Mikihisa; Nagahiro, Machi; Yumoto, Ryoko

    2016-02-01

    Nicotine is absorbed from the lungs into the systemic circulation during cigarette smoking. However, there is little information concerning the transport mechanism of nicotine in alveolar epithelial cells. In this study, we characterized the uptake of nicotine in rat primary cultured type II (TII) and transdifferentiated type I-like (TIL) epithelial cells. In both TIL and TII cells, [(3)H]nicotine uptake was time and temperature-dependent, and showed saturation kinetics. [(3)H]Nicotine uptake in these cells was not affected by Na(+), but was sensitive to extracellular and intracellular pH, suggesting the involvement of a nicotine/proton antiport system. The uptake of [(3)H]nicotine in these cells was potently inhibited by organic cations such as clonidine, diphenhydramine, and pyrilamine, but was not affected by substrates and/or inhibitors of known organic cation transporters such as carnitine, 1-methyl-4-phenylpyridinium, and tetraethylammonium. In addition, the uptake of [(3)H]nicotine in TIL cells was stimulated by preloading the cells with unlabeled nicotine, pyrilamine, and diphenhydramine, but not with tetraethylammonium. These results suggest that a novel proton-coupled antiporter is involved in the uptake of nicotine in alveolar epithelial cells and its absorption from the lungs into the systemic circulation. Copyright © 2016. Published by Elsevier Inc.

  8. Genetic engineering alveolar macrophages for host resistance to PRRSV.

    Science.gov (United States)

    Prather, Randall S; Whitworth, Kristin M; Schommer, Susan K; Wells, Kevin D

    2017-09-01

    Standard strategies for control of porcine reproductive and respiratory syndrome virus (PRRSV) have not been effective, as vaccines have not reduced the prevalence of disease and many producers depopulate after an outbreak. Another method of control would be to prevent the virus from infecting the pig. The virus was thought to infect alveolar macrophages by interaction with a variety of cell surface molecules. One popular model had PRRSV first interacting with heparin sulfate followed by binding to sialoadhesin and then being internalized into an endosome. Within the endosome, PRRSV was thought to interact with CD163 to uncoat the virus so the viral genome could be released into the cytosol and infect the cell. Other candidate receptors have included vimentin, CD151 and CD209. By using genetic engineering, it is possible to test the importance of individual entry mediators by knocking them out. Pigs engineered by knockout of sialoadhesin were still susceptible to infection, while CD163 knockout resulted in pigs that were resistant to infection. Genetic engineering is not only a valuable tool to determine the role of specific proteins in infection by PRRSV (in this case), but also provides a means to create animals resistant to disease. Genetic engineering of alveolar macrophages can also illuminate the role of other proteins in response to infection. We suggest that strategies to prevent infection be pursued to reduce the reservoir of virus. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Alveolar rhabdomyosarcoma: origin and prognostic implications of molecular findings.

    Science.gov (United States)

    Eguía-Aguilar, Pilar; López-Martínez, Briceida; Retana-Contreras, Carmen; Perezpeña-Diazconti, Mario

    We present the case of a 2-year-old male patient with a facial tumor partially treated with chemotherapy before his admission to our institution. The tumor involved from the frontal region to the maxillary floor, the orbit, and the maxillary and sphenoid sinuses. The histopathological diagnosis revealed a stage IV alveolar rhabdomyosarcoma with infiltration to bone marrow and cerebrospinal fluid. He was managed with four cycles of adriamycin, actinomycin, cyclophosphamide and vincristine; cisplatin and irinotecan were added to the last cycle. The tumor had a 50% size reduction, but the patient died after a neutropenia and fever episode. The aggressive behavior of alveolar rhabdomyosarcoma has been associated with the expression of oncogenic fusion proteins resulting from chromosomal translocations, particularly t(2;13) (q35;q14) PAX3/FOXO1, and t(1;13) (p36;q14) PAX7/FOXO1 which were present in this patient. Copyright © 2016 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

  10. Primary pulmonary alveolar proteinosis: computed tomography features at diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Berteloot, Laureline; Emond-Gonsard, Sophie; Mamou-Mani, Tania; Lambot, Karen; Grevent, David [Hopital Necker Enfants-Malades, Department of Pediatric Radiology, Paris (France); Taam, Rola Abou; Le Bourgeois, Muriel [Hopital Necker Enfants-Malades, Department of Pediatric Pneumology and Allergology, Paris (France); Elie, Caroline [Hopital Necker Enfants-Malades, Department of Biostatistics, Paris (France); Paris Descartes University, Paris (France); Delacourt, Christophe; Blic, Jacques de [Hopital Necker Enfants-Malades, Department of Pediatric Pneumology and Allergology, Paris (France); Paris Descartes University, Paris (France); Brunelle, Francis [Hopital Necker Enfants-Malades, Department of Pediatric Radiology, Paris (France); Paris Descartes University, Paris (France)

    2014-07-15

    Pulmonary alveolar proteinosis (PAP) is characterized by an abnormal accumulation of periodic acid-schiff-positive lipoproteinaceous material in the alveoli. Early diagnosis allows setting up of therapeutic lung lavages, which reduces the need for oxygen supplementation and weight gain. To provide a description of radiological features by CT at the onset of primary PAP in children. The clinical and radiological data of 24 patients, including 16 boys and 8 girls (median age: 12 months), diagnosed with a primary form of PAP between April 1992 and May 2012 in a tertiary referral hospital, were retrospectively reviewed. CT images were examined for the presence of alveolar and interstitial elementary lesions. Correlation between clinical and radiological findings was assessed. The types of elementary lesions detected were: ground-glass opacities (n = 24), intralobular lines (n = 24), thickened interlobular septa (n = 22), thickened fissures (n = 21), airspace consolidation (n = 16), hyperinflation (n = 16), cystic lesions (n = 2) and micronodules (n = 1). A crazy-paving pattern was found in 92% of cases. Consolidation and hyperinflation were especially detected in younger children (median age, 8 months, P < 0.01). A density dependent gradient was found. The distribution of the lesions was symmetrical. There was no correlation between radiological and clinical data of severity of the disease. CT findings are suggestive of diagnosis of PAP in immunocompetent children with chronic respiratory failure. (orig.)

  11. Alveolar bone loss in osteoporosis: a loaded and cellular affair?

    Directory of Open Access Journals (Sweden)

    Jonasson G

    2016-07-01

    Full Text Available Grethe Jonasson,1,2 Marianne Rythén,2,3 1Department of Behavioral and Community Dentistry, Institute of Odontology, Sahlgrenska Academy, University of Gothenburg, Gothenburg, 2Research and Development Centre, Borås, 3Specialist Clinic for Pediatric Dentistry, Public Dental Service, Mölndal, Sweden Abstract: Maxillary and mandibular bone mirror skeletal bone conditions. Bone remodeling happens at endosteal surfaces where the osteoclasts and osteoblasts are situated. More surfaces means more cells and remodeling. The bone turnover rate in the mandibular alveolar process is probably the fastest in the body; thus, the first signs of osteoporosis may be revealed here. Hormones, osteoporosis, and aging influence the alveolar process and the skeletal bones similarly, but differences in loading between loaded, half-loaded, and unloaded bones are important to consider. Bone mass is redistributed from one location to another where strength is needed. A sparse trabeculation in the mandibular premolar region (large intertrabecular spaces and thin trabeculae is a reliable sign of osteopenia and a high skeletal fracture risk. Having dense trabeculation (small intertrabecular spaces and well-mineralized trabeculae is generally advantageous to the individual because of the low fracture risk, but may imply some problems for the clinician. Keywords: bone density, bone fracture, human, mandible, radiography, periodontitis

  12. 60 Years of Great Science (Oak Ridge National Laboratory)

    Science.gov (United States)

    2003-01-01

    This issue of Oak Ridge National Laboratory Review (vol. 36, issue 1) highlights Oak Ridge National Laboratory's contributions in more than 30 areas of research and related activities during the past 60 years and provides glimpses of current activities that are carrying on this heritage.

  13. A relook into the crustal architecture of Laxmi Ridge, northeastern ...

    Indian Academy of Sciences (India)

    derived free-air gravity (FAG) data to derive the crustal structure of Laxmi Ridge and adjacent areas. 2D and 3D crustal modelling suggests that the high resolution FAG low associated with the ridge is due to underplating and that it is of ...

  14. Some improved classification-based ridge parameter of Hoerl and ...

    African Journals Online (AJOL)

    In a linear regression model, it is often assumed that the explanatory variables are independent. This assumption is often violated and Ridge Regression estimator introduced by [2]has been identified to be more efficient than ordinary least square (OLS) in handling it. However, it requires a ridge parameter, K, of which many ...

  15. Some Improved Classification-Based Ridge Parameter Of Hoerl And ...

    African Journals Online (AJOL)

    In a linear regression model, it is often assumed that the explanatory variables are independent. This assumption is often violated and Ridge Regression estimator introduced by [2]has been identified to be more efficient than ordinary least square (OLS) in handling it. However, it requires a ridge parameter, K, of which many ...

  16. The Incidence of Finger Ridge Counts among the Christian ...

    African Journals Online (AJOL)

    user

    Abstract - The present study was attempted to obtain the occurrence total and absolute finger ridge counts from 102 unrelated Christian populations (60 males and 42 females) of Mysore city, Karnataka state of India. Data were collected by biometric scanner (USB finger print reader). The mean values of Total finger ridge ...

  17. Structure and origin of the 85 degrees E ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Ramana, M.V.; Subrahmanyam, V.; Chaubey, A.K.; Ramprasad, T.; Sarma, K.V.L.N.S.; Krishna, K.S.; Desa, M.; Murty, G.P.S.; Subrahmanyam, C.

    that the rocks of the 85 degrees E Ridge are magnetized with revesed polarity. The well-defined geophysical anomalies and and lack of magnetic polarity reversals together with the deep burial nature of the ridge may not favor a hotspot origin. Two alternative...

  18. Modeling the dynamics of offshore tidal sand ridges

    NARCIS (Netherlands)

    Yuan, B.

    2017-01-01

    Tidal sand ridges are large-scale bedforms with horizontal dimensions of several kilometers and heights of tens of meters. They occur in the offshore area of shelf seas that have a wide range of water depths (10-200 m). Based on their present-day behavior, ridges are classified as `active' (sand

  19. Oak Ridge Reservation Annual Site environmental report summary for 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This document presents a summary of the information collected for the Oak Ridge Reservation 1994 site environmental report. Topics discussed include: Oak Ridge Reservation mission; ecology; environmental laws; community participation; environmental restoration; waste management; radiation effects; chemical effects; risk to public; environmental monitoring; and radionuclide migration.

  20. Development of a Ridge Profile Weeder | Odigboh | Nigerian ...

    African Journals Online (AJOL)

    The prototype weeder described in this paper consists of a ground-driven rotating horizontal short shaft which is connected by universal joints to two gangs of rotary hoe weeders. With the short shaft nearly at the bottom of a furrow between two ridges, the gangs of weeders lie on the sides of the two ridges. The universal ...

  1. Morphologic characterization of alveolar macrophages from subjects with occupational exposure to inorganic particles.

    Science.gov (United States)

    Takemura, T; Rom, W N; Ferrans, V J; Crystal, R G

    1989-12-01

    Alveolar macrophages recovered by bronchoalveolar lavage from 43 nonsmoking or greater than 5-yr ex-smoking subjects with occupational exposure to inorganic particles (asbestos, n 1/2 19; silica, n 1/2 10; coal, n 1/2 14) were evaluated by light microscopy and transmission and scanning electron microscopy to determine the morphologic changes resulting in these cells from chronic inorganic particulate inhalation. Alveolar macrophages from dust-exposed subjects, including those who had been free of exposure to particles for more than 1 yr, contained particles of higher proportion than did those of normal unexposed subjects. Most of these particles were located within phagolysosomes. The frequency of multinucleated alveolar macrophages was significantly higher in the dust-exposed groups. Ultrastructural studies showed alterations of the morphologic aspects of the surfaces of alveolar macrophages from the dust-exposed subjects, including increased numbers of rufflings, filopodia, pinocytotic vesicles, subplasmalemmal linear densities, and increased frequency of macrophage-macrophage and macrophage-lymphocyte interactions. Furthermore, the numbers of lysosomes were significantly increased in alveolar macrophages from the dust-exposed subjects. Together, these morphologic changes are consistent with the sequelae of phagocytosis, and they emphasize both the role of alveolar macrophages in eliminating inorganic particles from the alveolar spaces and the consequences this role has in alveolar macrophage activation.

  2. Morbidity of chin bone transplants used for reconstructing alveolar defects in cleft patients

    NARCIS (Netherlands)

    Booij, A; Raghoebar, GM; Jansma, J; Kalk, WWI; Vissink, A

    Objective: The aim of this study was to evaluate the objective and subjective morbidity of symphyseal chin bone harvesting used for reconstruction of alveolar defects in young cleft patients. Design: All patients who had undergone chin bone harvesting for alveolar cleft reconstruction in the period

  3. Alveolar index as a means of skull classification: a radiological study ...

    African Journals Online (AJOL)

    Alveolar index is an important parameter in intra and inter-ethnic classification of skull and in defining the positional relation of the maxilla to the mandible. The objective of the study was to evaluate the alveolar index of Nigerians using radiographs. 130 (90 males and 40 females) normal lateral view skull radiographs of ...

  4. Regional differences in alveolar density in the human lung are related to lung height.

    Science.gov (United States)

    McDonough, John E; Knudsen, Lars; Wright, Alexander C; Elliott, W Mark; Ochs, Matthias; Hogg, James C

    2015-06-01

    The gravity-dependent pleural pressure gradient within the thorax produces regional differences in lung inflation that have a profound effect on the distribution of ventilation within the lung. This study examines the hypothesis that gravitationally induced differences in stress within the thorax also influence alveolar density in terms of the number of alveoli contained per unit volume of lung. To test this hypothesis, we measured the number of alveoli within known volumes of lung located at regular intervals between the apex and base of four normal adult human lungs that were rapidly frozen at a constant transpulmonary pressure, and used microcomputed tomographic imaging to measure alveolar density (number alveoli/mm3) at regular intervals between the lung apex and base. These results show that at total lung capacity, alveolar density in the lung apex is 31.6 ± 3.4 alveoli/mm3, with 15 ± 6% of parenchymal tissue consisting of alveolar duct. The base of the lung had an alveolar density of 21.2 ± 1.6 alveoli/mm3 and alveolar duct volume fraction of 29 ± 6%. The difference in alveolar density can be negated by factoring in the effects of alveolar compression due to the pleural pressure gradient at the base of the lung in vivo and at functional residual capacity.

  5. Is 2 mm a safe distance from the inferior alveolar canal to avoid ...

    African Journals Online (AJOL)

    Aim: The aim of the present study was to compare the neurosensory complications related to implants inserted closer than 2 mm to the inferior alveolar canal (IAC) with those inserted further than 2 mm. Materials and ... complications. Keywords: Dental implants, inferior alveolar nerve injury, neurosensory complication ...

  6. Revisiting the Ridge-Push Force Using the Lithospheric Geoid

    Science.gov (United States)

    Richardson, R. M.; Coblentz, D. D.

    2014-12-01

    The geoid anomaly and driving force associated with the cooling oceanic lithosphere ("ridge push") are both proportional to dipole moment of the density-depth distribution, and allow a reevaluation of the ridge push force using the geoid. The challenge with this approach is to isolate the "lithospheric geoid" from the full geoid signal. Our approach is to use a band-pass spherical harmonic filter on the full geoid (e.g., EGM2008-WGS84, complete to spherical harmonic degree and order 2159) between orders 6 and 80. However, even this "lithospheric geoid" is noisy, and thus we average over 100 profiles evenly spaced along the global ridge system to obtain an average geoid step associated with the mid-ocean ridges. Because the positive ridge geoid signal is largest near the ridge (and to capture fast-spreading ridges), we evaluate symmetrical profiles extending ±45 m.y. about the ridge. We find an average ridge geoid anomaly of 4.5m, which is equivalent to a 10m anomaly for 100 m.y. old oceanic lithosphere. This geoid step corresponds to a ridge push force of ~2.4 x1012N/m for old oceanic lithosphere of 100 m.y., very similar to earlier estimates of ~2.5 x1012N/m based on simple half-space models. This simple half-space model also predicts constant geoid slopes of about 0.15 m/m.y. for cooling oceanic lithosphere. Our observed geoid slopes are consistent with this value for ages up to 40-50 m.y., but drop off to lower values at greater ages. We model this using a plate cooling model (with a thickness of the order of 125km) to fit the observation that the geoid anomaly and ridge driving force only increase slowly for ages greater than 40 m.y. (in contrast to the half-space model where the linear dependence on age holds for all ages). This reduction of the geoid slope results in a 20% decrease in the predicted ridge push force. This decrease is due to the combined effects of treating the oceanic lithosphere as a cooling plate (vs. a half-space), and the loss of geoidal

  7. DA-Raf–dependent inhibition of the Ras-ERK signaling pathway in type 2 alveolar epithelial cells controls alveolar formation

    OpenAIRE

    Watanabe-Takano, Haruko; Takano, Kazunori; Sakamoto, Akemi; Matsumoto, Kenji; Tokuhisa, Takeshi; Endo, Takeshi; Hatano, Masahiko

    2014-01-01

    Alveoli participating in gas exchange are essential for maintaining life in air-breathing vertebrates. In developing lungs, alveolar myofibroblasts (AMYFs) cause morphological changes of interalveolar walls and consequently generate alveoli. Although the Ras-ERK signaling pathway is known to regulate alveolar formation, the molecular and cellular mechanisms underlying its role remain largely obscure. Here, we clarified a critical role of DA-Raf1 (DA-Raf)—a dominant-negative antagonist of the ...

  8. Postoperative morbidity after reconstruction of alveolar bone defects with chin bone transplants in cleft patients - 111 consecutive patients

    DEFF Research Database (Denmark)

    Andersen, Kristian; Nørholt, Sven Erik; Knudsen, Johan

    Postoperative morbidity after reconstruction of alveolar bone defects with chin bone transplants in cleft patients - 111 consecutive patients......Postoperative morbidity after reconstruction of alveolar bone defects with chin bone transplants in cleft patients - 111 consecutive patients...

  9. Is there a relation between local bone quality as assessed on panoramic radiographs and alveolar bone level?

    Science.gov (United States)

    Nackaerts, Olivia; Gijbels, Frieda; Sanna, Anna-Maria; Jacobs, Reinhilde

    2008-03-01

    The aim was to explore the relation between radiographic bone quality on panoramic radiographs and relative alveolar bone level. Digital panoramic radiographs of 94 female patients were analysed (mean age, 44.5; range, 35-74). Radiographic density of the alveolar bone in the premolar region was determined using Agfa Musica software. Alveolar bone level and bone quality index (BQI) were also assessed. Relationships between bone density and BQI on one hand and the relative loss of alveolar bone level on the other were assessed. Mandibular bone density and loss of alveolar bone level were weakly but significantly negatively correlated for the lower premolar area (r = -.27). The BQI did not show a statistically significant relation to alveolar bone level. Radiographic mandibular bone density on panoramic radiographs shows a weak but significant relation to alveolar bone level, with more periodontal breakdown for less dense alveolar bone.

  10. Optical dating of dune ridges on Rømø

    DEFF Research Database (Denmark)

    Madsen, Anni Tindahl; Murray, A. S.; Andersen, Thorbjørn Joest

    2007-01-01

    The application of optically stimulated luminescence (OSL) to the dating of recent aeolian sand ridges on Rømø, an island off the southwest coast of Denmark, is tested. These sand ridges began to form approximately 300 years ago, and estimates of the ages are available from historical records....... Samples for OSL dating were taken ~0.5 m below the crests of four different dune ridges; at least five samples were recovered from each ridge to test the internal consistency of the ages. Additional samples were recovered from the low lying areas in the swales and from the scattered dune formations......-defined building phases separated by inactive periods and the first major ridge formed ~235 years ago. This study demonstrates that optical dating can be successfully applied to these young aeolian sand deposits, and we conclude that OSL dating is a powerful chronological tool in studies of coastal change....

  11. The fate of volatiles in mid-ocean ridge magmatism

    CERN Document Server

    Keller, Tobias; Hirschmann, Marc M

    2016-01-01

    Deep-Earth volatile cycles couple the mantle with near-surface reservoirs. Volatiles are emitted by volcanism and, in particular, from mid-ocean ridges, which are the most prolific source of basaltic volcanism. Estimates of volatile extraction from the asthenosphere beneath ridges typically rely on measurements of undegassed lavas combined with simple petrogenetic models of the mean degree of melting. Estimated volatile fluxes have large uncertainties; this is partly due to a poor understanding of how volatiles are transported by magma in the asthenosphere. Here, we assess the fate of mantle volatiles through numerical simulations of melting and melt transport at mid-ocean ridges. Our simulations are based on two-phase, magma/mantle dynamics theory coupled to an idealised thermodynamic model of mantle melting in the presence of water and carbon dioxide. We combine simulation results with catalogued observations of all ridge segments to estimate a range of likely volatile output from the global mid-ocean ridge...

  12. Oak Ridge Reservation environmental report for 1989

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, V.A.; Wilson, A.R. (eds.)

    1990-10-01

    The first two volumes of this report are devoted to a presentation of environmental data and supporting narratives for the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) and surrounding environs during 1989. Volume 1 includes all narrative descriptions, summaries, and conclusions and is intended to be a stand-alone'' report for the ORR for the reader who does not want to review in detail all of the 1989 data. Volume 2 includes the detailed data summarized in a format to ensure that all environmental data are represented in the tables. Narratives are not included in Vol. 2. The tables in Vol. 2 are addressed in Vol. 1. For this reason, Vol. 2 cannot be considered a stand-alone report but is intended to be used in conjunction with Vol. 1. 16 figs., 194 tabs.

  13. Oak Ridge Health Studies phase 1 report, Volume 1: Oak Ridge Phase 1 overview

    Energy Technology Data Exchange (ETDEWEB)

    Yarbrough, M.I.; Van Cleave, M.L.; Turri, P.; Daniel, J.

    1993-09-01

    In July 1991, the State of Tennessee initiated the Health Studies Agreement with the United States Department of Energy to carry out independent studies of possible adverse health effects in people living in the vicinity of the Oak Ridge Reservation. The health studies focus on those effects that could have resulted or could result from exposures to chemicals and radioactivity released at the Reservation since 1942. The major focus of the first phase was to complete a Dose Reconstruction Feasibility Study. This study was designed to find out if enough data exist about chemical and radionuclide releases from the Oak Ridge Reservation to conduct a second phase. The second phase will lead to estimates of the actual amounts or the ``doses`` of various contaminants received by people as a result of off-site releases. Once the doses of various contaminants have been estimated, scientists and physicians will be better able to evaluate whether adverse health effects could have resulted from the releases.

  14. Melton Valley Storage Tanks Capacity Increase Project, Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The US Department of Energy (DOE) proposes to construct and maintain additional storage capacity at Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, for liquid low-level radioactive waste (LLLW). New capacity would be provided by a facility partitioned into six individual tank vaults containing one 100,000 gallon LLLW storage tank each. The storage tanks would be located within the existing Melton Valley Storage Tank (MVST) facility. This action would require the extension of a potable water line approximately one mile from the High Flux Isotope Reactor (HFIR) area to the proposed site to provide the necessary potable water for the facility including fire protection. Alternatives considered include no-action, cease generation, storage at other ORR storage facilities, source treatment, pretreatment, and storage at other DOE facilities.

  15. Source document for waste area groupings at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Osborne, P.L.; Kuhaida, A.J., Jr.

    1996-09-01

    This document serves as a source document for Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and other types of documents developed for and pertaining to Environmental Restoration (ER) Program activities at Oak Ridge National Laboratory (ORNL). It contains descriptions of the (1) regulatory requirements for the ORR ER Program, (2) Oak Ridge Reservation (ORR) ER Program, (3) ORNL site history and characterization, and (4) history and characterization of Waste Area Groupings (WAGS) 1-20. This document was created to save time, effort, and money for persons and organizations drafting documents for the ER Program and to improve consistency in the documents prepared for the program. By eliminating the repetitious use of selected information about the program, this document will help reduce the time and costs associated with producing program documents. By serving as a benchmark for selected information about the ER Program, this reference will help ensure that information presented in future documents is accurate and complete.

  16. A contemporary perspective on techniques for the clinical assessment of alveolar bone

    Energy Technology Data Exchange (ETDEWEB)

    Hausmann, E. (State Univ. of New York, Buffalo (USA))

    1990-03-01

    Radiographic techniques, traditional ones as well as newer ones under development, for clinically assessing alveolar bone are critically assessed. Traditional intraoral radiography is reexamined, in particular with regard to the accuracy with which the alveolar crest is seen. Evidence is presented for a more accurate representation of the alveolar crest on bitewings rather than periapical films. Application in periodontics of newer radiographic techniques, subtraction radiography, and single and dual photon aborptiometry presently under clinical development are discussed in regard to their potential and limitations. Similarly, radiopharmaceuticals to evaluate the metabolic status of alveolar bone are discussed as well as the potential for using analyses of gingival crevice fluid as a window for assessment of alveolar crest metabolism. 46 references.

  17. Tiger team assessment of the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1990-02-01

    This document contains findings identified during the Tiger Team Compliance Assessment of the Department of Energy's (DOE's) Y-12 Plant in Oak Ridge, Tennessee. The Y-12 Plant Tiger Team Compliance Assessment is comprehensive in scope. It covers the Environmental, Safety, and Health (including Occupational Safety and Health Administration (OSHA) compliance), and Management areas and determines the plant's compliance with applicable federal (including DOE), state, and local regulations and requirements. 4 figs., 12 tabs.

  18. Site descriptions of environmental restoration units at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Kuhaida, A.J. Jr.; Parker, A.F.

    1997-02-01

    This report provides summary information on Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) sites as listed in the Oak Ridge Reservation Federal Facility Agreement (FFA), dated January 1, 1992, Appendix C. The Oak Ridge National Laboratory was built in 1943 as part of the World War II Manhattan Project. The original mission of ORNL was to produce and chemically separate the first gram-quantities of plutonium as part of the national effort to produce the atomic bomb. The current mission of ORNL is to provide applied research and development in support of the U.S. Department of Energy (DOE) programs in nuclear fusion and fission, energy conservation, fossil fuels, and other energy technologies and to perform basic scientific research in selected areas of the physical, life, and environmental sciences. ER is also tasked with clean up or mitigation of environmental impacts resulting from past waste management practices on portions of the approximately 37,000 acres within the Oak Ridge Reservation (ORR). Other installations located within the ORR are the Gaseous Diffusion Plant (K-25) and the Y-12 plant. The remedial action strategy currently integrates state and federal regulations for efficient compliance and approaches for both investigations and remediation efforts on a Waste Area Grouping (WAG) basis. As defined in the ORR FFA Quarterly Report July - September 1995, a WAG is a grouping of potentially contaminated sites based on drainage area and similar waste characteristics. These contaminated sites are further divided into four categories based on existing information concerning whether the data are generated for scoping or remedial investigation (RI) purposes. These areas are as follows: (1) Operable Units (OU); (2) Characterization Areas (CA); (3) Remedial Site Evaluation (RSE) Areas; and (4) Removal Site Evaluation (RmSE) Areas.

  19. Geodynamic modeling of the capture and release of a plume conduit by a migrating mid-ocean ridge

    Science.gov (United States)

    Hall, P. S.

    2011-12-01

    plates over the relatively stationary, long-lived conduits of mantle plumes. However, paleomagnetic data from the Hawaii-Emperor Seamount Chain suggests that the Hawaiian hotspot moved rapidly (~40 mm/yr) between 81 - 47 Ma [Tarduno et al., 2003]. Recently, Tarduno et al. [2009] suggested that this period of rapid motion might be the surface expression of a plume conduit returning to a largely vertical orientation after having been captured and tilted as the result of being "run over" by migrating mid-ocean ridge. I report on a series of analog geodynamic experiments designed to characterize the evolution of a plume conduit as a mid-ocean ridge migrates over. Experiments were conducted in a clear acrylic tank (100 cm x 70 cm x 50 cm) filled with commercial grade high-fructose corn syrup. Plate-driven flow is modeled by dragging two sheets of Mylar film (driven by independent DC motors) in opposite directions over the surface of the fluid. Ridge migration is achieved by moving the point at which the mylar sheets diverge using a separate motor drive. Buoyant plume flow is generated using a small electrical heater placed at the bottom of the tank. Plate velocities and ridge migration rate are controlled and plume temperature monitored using LabView software. Experiments are recorded using digital video which is then analyzed using digital image analysis software to track the position and shape of the plume conduit throughout the course of the experiment. The intersection of the plume conduit with the surface of the fluid is taken as an analog for the locus of hotspot volcanism and tracked as a function of time to obtain a hotspot migration rate. Results show that the plume conduit experiences significant tilting immediately following the passage of the migrating ridge.

  20. Greenland Fracture Zone-East Greenland Ridge(s) revisited: Indications of a C22-change in plate motion?

    DEFF Research Database (Denmark)

    Døssing, Arne; Funck, T.

    2012-01-01

    Changes in the lithospheric stress field, causing axial rift migration and reorientation of the transform, are generally proposed as an explanation for anomalously old crust and/or major aseismic valleys in oceanic ridge-transform-ridge settings. Similarly, transform migration of the Greenland...

  1. Tectonics of the Ninetyeast Ridge derived from spreading records in adjacent oceanic basins and age constraints of the ridge

    Digital Repository Service at National Institute of Oceanography (India)

    Krishna, K.S.; Abraham, H.; Sager, W.W.; Pringle, M.S.; Frey, F.; Rao, D.G.; Levchenko, O.V.

    and magnetic anomaly ages implies that the hot spot first emplaced NER volcanoes on the Indian plate at a distance from the Wharton Ridge, but as the northward drifting spreading ridge approached the hot spot, the two interacted, keeping later NER volcanism...

  2. The use of digital periapical radiographs to study the prevalence of alveolar domes

    Energy Technology Data Exchange (ETDEWEB)

    Xambre, Pedro Augusto Oliveira Santos; Valerio, Claudia Scigliano; Alves Cardoso, Claudia Assuncoe; Custodio, Antonio Luis Neto; Manzi, Flavio Ricardo [Dept. of Oral Radiology, School of Dentistry, Pontifical Catholic University of Minas Gerais, Belo Horizonte (Brazil)

    2016-09-15

    In the present study, we coined the term 'alveolar dome' and aimed to demonstrate the prevalence of alveolar domes through digital periapical radiographs. This study examined 800 digital periapical radiographs in regard to the presence of alveolar domes. The periapical radiographs were acquired by a digital system using a photostimulable phosphor (PSP) plate. The χ2 test, with a significance level of 5%, was used to compare the prevalence of alveolar domes in the maxillary posterior teeth and, considering the same teeth, to verify the difference in the prevalence of dome-shaped phenomena between the roots. The prevalence of alveolar domes present in the first pre-molars was statistically lower as compared to the other maxillary posterior teeth (p<0.05). No statistically significant difference was observed in the prevalence of alveolar domes between the maxillary first and second molars. Considering the maxillary first and second molars, it was observed that the palatal root presented a lower prevalence of alveolar domes when compared to the distobuccal and mesiobuccal roots (p<0.05). The present study coined the term 'alveolar dome', referring to the anatomical projection of the root into the floor of the maxillary sinus. The maxillary first and second molars presented a greater prevalence of alveolar domes, especially in the buccal roots, followed by the third molars and second pre-molars. Although the periapical radiograph is a two-dimensional method, it can provide dentists with the auxiliary information necessary to identify alveolar domes, thus improving diagnosis, planning, and treatment.

  3. An alternative approach to extruding a vertically impacted lower third molar using an orthodontic miniscrew: A case report with cone-beam CT follow-up

    Energy Technology Data Exchange (ETDEWEB)

    Cortes, Arthur Rodriguez Gonzales; Cavalcanti, Marcelo Gusmaeo Paraiso; Arita, Emiko Saito [Dept. of Oral Radiology, School of Dentistry, University of Saeo Paulo, Saeo Paulo (Brazil); No-Cortes, Julian [Orthodontic Clinic, Saeo Paulo (Brazil)

    2014-06-15

    One of the most common oral surgical procedures is the extraction of the lower third molar (LTM). Postoperative complications such as paresthesia due to inferior alveolar nerve (IAN) injury are commonly observed in cases of horizontal and vertical impaction. The present report discusses a case of a vertically impacted LTM associated with a dentigerous cyst. An intimate contact between the LTM roots and the mandibular canal was observed on a panoramic radiograph and confirmed with cone-beam computed tomographic (CBCT) cross-sectional cuts. An orthodontic miniscrew was then used to extrude the LTM prior to its surgical removal in order to avoid the risk of inferior alveolar nerve injury. CBCT imaging follow-up confirmed the success of the LTM orthodontic extrusion.

  4. Geomorphological investigation of multiphase glacitectonic composite ridge systems in Svalbard

    Science.gov (United States)

    Lovell, Harold; Benn, Douglas I.; Lukas, Sven; Spagnolo, Matteo; Cook, Simon J.; Swift, Darrel A.; Clark, Chris D.; Yde, Jacob C.; Watts, Tom

    2018-01-01

    Some surge-type glaciers on the High-Arctic archipelago of Svalbard have large glacitectonic composite ridge systems at their terrestrial margins. These have formed by rapid glacier advance into proglacial sediments during the active surge phase, creating multicrested moraine complexes. Such complexes can be formed during single surge advances or multiple surges to successively less-extensive positions. The few existing studies of composite ridge systems have largely relied on detailed information on internal structure and sedimentology to reconstruct their formation and links to surge processes. However, natural exposures of internal structure are commonly unavailable, and the creation of artificial exposures is often problematic in fragile Arctic environments. To compensate for these issues, we investigate the potential for reconstructing composite ridge system formation based on geomorphological evidence alone, focusing on clear morphostratigraphic relationships between ridges within the moraine complex and relict meltwater channels/outwash fans. Based on mapping at the margins of Finsterwalderbreen (in Van Keulenfjorden) and Grønfjordbreen (in Grønfjorden), we show that relict meltwater channels that breach outer parts of the composite ridge systems are in most cases truncated upstream within the ridge complex by an inner pushed ridge or ridges at their ice-proximal extents. Our interpretation of this relationship is that the entire composite ridge system is unlikely to have formed during the same glacier advance but is instead the product of multiple advances to successively less-extensive positions, whereby younger ridges are emplaced on the ice-proximal side of older ridges. This indicates that the Finsterwalderbreen composite ridge system has been formed by multiple separate advances, consistent with the cyclicity of surges. Being able to identify the frequency and magnitude of former surges is important as it provides insight into the past behaviour of

  5. Hormonal regulation of alveolarization: structure-function correlation

    Directory of Open Access Journals (Sweden)

    Godinez Marye H

    2006-03-01

    Full Text Available Abstract Background Dexamethasone (Dex limits and all-trans-retinoic acid (RA promotes alveolarization. While structural changes resulting from such hormonal exposures are known, their functional consequences are unclear. Methods Neonatal rats were treated with Dex and/or RA during the first two weeks of life or were given RA after previous exposure to Dex. Morphology was assessed by light microscopy and radial alveolar counts. Function was evaluated by plethysmography at d13, pressure volume curves at d30, and exercise swim testing and arterial blood gases at both d15 and d30. Results Dex-treated animals had simplified lung architecture without secondary septation. Animals given RA alone had smaller, more numerous alveoli. Concomitant treatment with Dex + RA prevented the Dex-induced changes in septation. While the results of exposure to Dex + RA were sustained, the effects of RA alone were reversed two weeks after treatment was stopped. At d13, Dex-treated animals had increased lung volume, respiratory rate, tidal volume, and minute ventilation. On d15, both RA- and Dex-treated animals had hypercarbia and low arterial pH. By d30, the RA-treated animals resolved this respiratory acidosis, but Dex-treated animals continued to demonstrate blood gas and lung volume abnormalities. Concomitant RA treatment improved respiratory acidosis, but failed to normalize Dex-induced changes in pulmonary function and lung volumes. No differences in exercise tolerance were noted at either d15 or d30. RA treatment after the period of alveolarization also corrected the effects of earlier Dex exposure, but the structural changes due to RA alone were again lost two weeks after treatment. Conclusion We conclude that both RA- and corticosteroid-treatments are associated with respiratory acidosis at d15. While RA alone-induced changes in structure andrespiratory function are reversed, Dex-treated animals continue to demonstrate increased respiratory rate, minute

  6. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders Rosenstand

    producers face decisions on exporting, vertical integration of intermediate-input production, and whether the intermediate-input production should be offshored to a low-wage country. We find that the fractions of final-good producers that pursue either vertical integration, offshoring, or exporting are all......We build a three-country model of international trade in final goods and intermediate inputs and study the relation between four different types of trade liberalisation and vertical integration. Firms are heterogeneous with respect to both productivity and factor (headquarter) intensity. Final-good...... increasing when intermediate-input trade or final-goods trade is liberalised. Finally, we provide guidance for testing the open-economy property rights theory of the firm using firm-level data and surprisingly show that the relationship between factor (headquarter) intensity and the likelihood of vertical...

  7. Horizontal and Vertical Line Designs.

    Science.gov (United States)

    Johns, Pat

    2003-01-01

    Presents an art lesson in which students learn about the artist Piet Mondrian and create their own abstract artworks. Focuses on geometric shapes using horizontal and vertical lines. Includes background information about the artist. (CMK)

  8. Vertical axis wind turbine airfoil

    Science.gov (United States)

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  9. Analyses of internal tides generation and propagation over a Gaussian ridge in laboratory and numerical experiments

    Science.gov (United States)

    Dossmann, Yvan; Paci, Alexandre; Auclair, Francis; Floor, Jochem

    2010-05-01

    Internal tides are suggested to play a major role in the sustaining of the global oceanic circulation [1][5]. Although the exact origin of the energy conversions occurring in stratified fluids is questioned [2], it is clear that the diapycnal energy transfers provided by the energy cascade of internal gravity waves generated at tidal frequencies in regions of steep bathymetry is strongly linked to the general circulation energy balance. Therefore a precise quantification of the energy supply by internal waves is a crucial step in forecasting climate, since it improves our understanding of the underlying physical processes. We focus on an academic case of internal waves generated over an oceanic ridge in a linearly stratified fluid. In order to accurately quantify the diapycnal energy transfers caused by internal waves dynamics, we adopt a complementary approach involving both laboratory and numerical experiments. The laboratory experiments are conducted in a 4m long tank of the CNRM-GAME fluid mechanics laboratory, well known for its large stratified water flume (e.g. Knigge et al [3]). The horizontal oscillation at precisely controlled frequency of a Gaussian ridge immersed in a linearly stratified fluid generates internal gravity waves. The ridge of e-folding width 3.6 cm is 10 cm high and spans 50 cm. We use PIV and Synthetic Schlieren measurement techniques, to retrieve the high resolution velocity and stratification anomaly fields in the 2D vertical plane across the ridge. These experiments allow us to get access to real and exhaustive measurements of a wide range of internal waves regimes by varying the precisely controlled experimental parameters. To complete this work, we carry out some direct numerical simulations with the same parameters (forcing amplitude and frequency, initial stratification, boundary conditions) as the laboratory experiments. The model used is a non-hydrostatic version of the numerical model Symphonie [4]. Our purpose is not only to

  10. ENVIRONMENTAL BASELINE SURVEY REPORT FOR WEST BLACK OAK RIDGE, EAST BLACK OAK RIDGE, MCKINNEY RIDGE, WEST PINE RIDGE, AND PARCEL 21D IN THE VICINITY OF THE EAST TENNESSEE TECHNOLOGY PARK, OAK RIDGE, TENNESSEE

    Energy Technology Data Exchange (ETDEWEB)

    David A. King

    2012-11-29

    This environmental baseline survey (EBS) report documents the baseline environmental conditions of five land parcels located near the U.S. Department of Energy’s (DOE’s) East Tennessee Technology Park (ETTP), including West Black Oak Ridge, East Black Oak Ridge, McKinney Ridge, West Pine Ridge, and Parcel 21d. The goal is to obtain all media no-further-investigation (NFI) determinations for the subject parcels considering existing soils. To augment the existing soils-only NFI determinations, samples of groundwater, surface water, soil, and sediment were collected to support all media NFI decisions. The only updates presented here are those that were made after the original issuance of the NFI documents. In the subject parcel where the soils NFI determination was not completed for approval (Parcel 21d), the full process has been performed to address the soils as well. Preparation of this report included the detailed search of federal government records, title documents, aerial photos that may reflect prior uses, and visual inspections of the property and adjacent properties. Interviews with current employees involved in, or familiar with, operations on the real property were also conducted to identify any areas on the property where hazardous substances and petroleum products, or their derivatives, and acutely hazardous wastes may have been released or disposed. In addition, a search was made of reasonably obtainable federal, state, and local government records of each adjacent facility where there has been a release of any hazardous substance or any petroleum product or their derivatives, including aviation fuel and motor oil, and which is likely to cause or contribute to a release of any hazardous substance or any petroleum product or its derivatives, including aviation fuel or motor oil, on the real property. A radiological survey and soil/sediment sampling was conducted to assess baseline conditions of Parcel 21d that were not addressed by the soils-only NFI

  11. Aerodynamic roughness length related to non-aggregated tillage ridges

    Directory of Open Access Journals (Sweden)

    M. Kardous

    2005-11-01

    Full Text Available Wind erosion in agricultural soils is dependent, in part, on the aerodynamic roughness length (z0 produced by tillage ridges. Although previous studies have related z0 to ridge characteristics (ridge height (RH and spacing (RS, these relationships have not been tested for tillage ridges observed in the North African agricultural fields. In these regions, due to climate and soil conditions, small plowing tools are largely used. Most of these tools produce non-aggregated and closely-spaced small ridges. Thus, experiments were conducted in a 7-m long wind tunnel to measure z0 for 11 ridge types covering the range of geometric characteristics frequently observed in south Tunisia. Experimental results suggest that RH2/RS is the first order parameter controlling z0. A strong relationship between z0 and RH2/RS is proposed for a wide range of ridge characteristics.

  12. Backward integration, forward integration, and vertical foreclosure

    OpenAIRE

    Spiegel, Yossi

    2013-01-01

    I show that partial vertical integration may either alleviates or exacerbate the concern for vertical foreclosure relative to full vertical integration and I examine its implications for consumer welfare.

  13. Chemical characteristics of waters in Karst Formations at the Oak Ridge Y-12 Plant

    Energy Technology Data Exchange (ETDEWEB)

    Shevenell, L.A. [Univ. of Nevada, Reno, NV (United States). Nevada Bureau of Mines and Geology

    1994-11-01

    Several waste disposal sites are located adjacent to or on a karst aquifer composed of the Cambrian Maynardville Limestone (Cmn) and the Cambrian Copper Ridge Dolomite (Ccr) at the U.S. Department of Energy Oak Ridge Y-12 Plant in Oak Ridge, TN. Highly variable chemical characteristics (i.e., hardness) can indicate that the portion of the aquifer tapped by a particular well is subject to a significant quick-flow component where recharge to the system is rapid and water levels and water quality change rapidly in response to precipitation events. Water zones in wells at the Y-12 Plant that exhibit quick-flow behavior (i.e., high hydraulic conductivity) are identified based on their geochemical characteristics and variability in geochemical parameters, and observations made during drilling of the wells. The chemical data used in this study consist of between one and 20 chemical analyses for each of 102 wells and multipart monitoring zones. Of these 102 water zones, 10 were consistently undersaturated with respect to calcite suggesting active dissolution. Repeat sampling of water zones shows that both supersaturation and undersaturation with respect to dolomite occurs in 46 water zones. Twelve of the zones had partial pressure of CO{sub 2} near atmospheric values suggesting limited interaction between recharge waters and the gases and solids in the vadose zone and aquifer, and hence, relatively short residence times. The preliminary data suggest that the Cmn is composed of a complicated network of interconnected, perhaps anastomosing, cavities. The degree of interconnection between the identified cavities is yet to be determined, although it is expected that there is a significant vertical and lateral interconnection between the cavities located at shallow depths in the Cnm throughout Bear Creek Valley and the Y-12 Plant area.

  14. Alveolar recruitment in pulmonary contusion: case report and literature review

    OpenAIRE

    Lívia Maria Vitório Trindade; Lucianne Cristina da Silva Lopes; Graziella França Bernardelli Cipriano; Letícia Sandre Vendrame; Ary Andrade Junior

    2009-01-01

    O tratamento da contusão pulmonar quando instituído de forma correta é bastante simples na maioria das vezes. As alterações fisiopatológicas acontecem como decorrência dos efeitos produzidos pela perda da integridade da parede torácica, acúmulo de líquidos na cavidade pleural, obstrução da via aérea e disfunção pulmonar. A manobra de recrutamento alveolar consiste na reabertura de áreas pulmonares colapsadas através do aumento da pressão inspiratória na via aérea. O objetivo deste relato foi ...

  15. A case of alveolar soft part sarcoma of the pleura.

    Science.gov (United States)

    Ju, Hyeong Uk; Seo, Kwang Won; Jegal, Yangjin; Ahn, Jong-Joon; Lee, Young Jik; Kim, Young Min; Oak, Chulho; Ra, Seung Won

    2013-02-01

    Alveolar soft part sarcoma (ASPS) is a rare malignant soft-tissue neoplasm of unknown histogenesis. The two main sites of occurrence are the lower extremities in adults and the head and neck in children. We report the first case of pleural ASPS occurring in a 58-yr-old man who presented with progressive dyspnea. A computed tomographic scan of the thorax revealed a large enhancing pleural mass with pleural effusion in the left hemithorax. Wide excision of the pleural mass was performed. Histologically, the tumor consisted of organoid nests of large polygonal cells, the cytoplasm of which had eosinophilic and D-PAS positive granules. Immunohistochemical staining showed that the tumor cell nuclei were positive for transcription factor 3 (TFE3). The pleural ASPS with multiple bone metastases recurred 1 yr after surgery and the patient died of acute pulmonary embolism 1.5 yr after diagnosis.

  16. Hepatic alveolar echinococcosis: correlative US and CT study

    Energy Technology Data Exchange (ETDEWEB)

    Didier, D.; Weiler, S.; Rohmer, P.; Lasseque, A.; Deschamps, J.P.; Vuitton, D.; Miguet, J.P.; Weill, F.

    1985-01-01

    A total of 24 cases of hepatic alveolar echinococcosis (HAE) due to Echinococcus multilocularis was assessed by US and CT. The diagnosis was confirmed in all cases by immunologic and histologic study. Both US and CT patterns of HAE showed changes of liver morphology in both contour and size. Abnormal areas of parenchyma were nodular or in fields, irregular, heterogeneous, and basically echogenic. Clustered microcalcifications were encountered within the abnormal parenchymal fields in 50% of cases, and necrotized zones occurred in 40% of cases. Dilatation of intrahepatic bile ducts was commonly seen, especially on US; hilar involvement was frequent. Follow-up by both techniques can display increases of primary lesions, occurrence of new foci, and local or regional extensions. Precise evaluations of the lesions arising from correlative use of US and CT permits adequate therapeutic management.

  17. Immortalization of human alveolar epithelial cells to investigate nanoparticle uptake.

    Science.gov (United States)

    Kemp, Sarah J; Thorley, Andrew J; Gorelik, Julia; Seckl, Michael J; O'Hare, Michael J; Arcaro, Alexandre; Korchev, Yuri; Goldstraw, Peter; Tetley, Teresa D

    2008-11-01

    Primary human alveolar type 2 (AT2) cells were immortalized by transduction with the catalytic subunit of telomerase and simian virus 40 large-tumor antigen. Characterization by immunochemical and morphologic methods demonstrated an AT1-like cell phenotype. Unlike primary AT2 cells, immortalized cells no longer expressed alkaline phosphatase, pro-surfactant protein C, and thyroid transcription factor-1, but expressed increased caveolin-1 and receptor for advanced glycation end products (RAGE). Live cell imaging using scanning ion conductance microscopy showed that the cuboidal primary AT2 cells were approximately 15 microm and enriched with surface microvilli, while the immortal AT1 cells were attenuated more than 40 microm, resembling these cells in situ. Transmission electron microscopy highlighted the attenuated morphology and showed endosomal vesicles in some immortal AT1 cells (but not primary AT2 cells) as found in situ. Particulate air pollution exacerbates cardiopulmonary disease. Interaction of ultrafine, nano-sized particles with the alveolar epithelium and/or translocation into the cardiovasculature may be a contributory factor. We hypothesized differential uptake of nanoparticles by AT1 and AT2 cells, depending on particle size and surface charge. Uptake of 50-nm and 1-microm fluorescent latex particles was investigated using confocal microscopy and scanning surface confocal microscopy of live cells. Fewer than 10% of primary AT2 cells internalized particles. In contrast, 75% immortal AT1 cells internalized negatively charged particles, while less than 55% of these cells internalized positively charged particles; charge, rather than size, mattered. The process was rapid: one-third of the total cell-associated negatively charged 50-nm particle fluorescence measured at 24 hours was internalized during the first hour. AT1 cells could be important in translocation of particles from the lung into the circulation.

  18. A Computational Approach to Understand In Vitro Alveolar Morphogenesis

    Science.gov (United States)

    Kim, Sean H. J.; Yu, Wei; Mostov, Keith; Matthay, Michael A.; Hunt, C. Anthony

    2009-01-01

    Primary human alveolar type II (AT II) epithelial cells maintained in Matrigel cultures form alveolar-like cysts (ALCs) using a cytogenesis mechanism that is different from that of other studied epithelial cell types: neither proliferation nor death is involved. During ALC formation, AT II cells engage simultaneously in fundamentally different, but not fully characterized activities. Mechanisms enabling these activities and the roles they play during different process stages are virtually unknown. Identifying, characterizing, and understanding the activities and mechanisms are essential to achieving deeper insight into this fundamental feature of morphogenesis. That deeper insight is needed to answer important questions. When and how does an AT cell choose to switch from one activity to another? Why does it choose one action rather than another? We report obtaining plausible answers using a rigorous, multi-attribute modeling and simulation approach that leveraged earlier efforts by using new, agent and object-oriented capabilities. We discovered a set of cell-level operating principles that enabled in silico cells to self-organize and generate systemic cystogenesis phenomena that are quantitatively indistinguishable from those observed in vitro. Success required that the cell components be quasi-autonomous. As simulation time advances, each in silico cell autonomously updates its environment information to reclassify its condition. It then uses the axiomatic operating principles to execute just one action for each possible condition. The quasi-autonomous actions of individual in silico cells were sufficient for developing stable cyst-like structures. The results strengthen in silico to in vitro mappings at three levels: mechanisms, behaviors, and operating principles, thereby achieving a degree of validation and enabling answering the questions posed. We suggest that the in silico operating principles presented may have a biological counterpart and that a

  19. Solar cell with doped groove regions separated by ridges

    Science.gov (United States)

    Molesa, Steven Edward; Pass, Thomas; Kraft, Steve

    2017-01-31

    Solar cells with doped groove regions separated by ridges and methods of fabricating solar cells are described. In an example, a solar cell includes a substrate having a surface with a plurality of grooves and ridges. A first doped region of a first conductivity type is disposed in a first of the grooves. A second doped region of a second conductivity type, opposite the first conductivity type, is disposed in a second of the grooves. The first and second grooves are separated by one of the ridges.

  20. Particle-induced indentation of the alveolar epithelium caused by surface tension forces

    Science.gov (United States)

    Kojic, M.; Tsuda, A.

    2010-01-01

    Physical contact between an inhaled particle and alveolar epithelium at the moment of particle deposition must have substantial effects on subsequent cellular functions of neighboring cells, such as alveolar type-I, type-II pneumocytes, alveolar macrophage, as well as afferent sensory nerve cells, extending their dendrites toward the alveolar septal surface. The forces driving this physical insult are born at the surface of the alveolar air-liquid layer. The role of alveolar surfactant submerging a hydrophilic particle has been suggested by Gehr and Schürch's group (e.g., Respir Physiol 80: 17–32, 1990). In this paper, we extended their studies by developing a further comprehensive and mechanistic analysis. The analysis reveals that the mechanics operating in the particle-tissue interaction phenomena can be explained on the basis of a balance between surface tension force and tissue resistance force; the former tend to move a particle toward alveolar epithelial cell surface, the latter to resist the cell deformation. As a result, the submerged particle deforms the tissue and makes a noticeable indentation, which creates unphysiological stress and strain fields in tissue around the particle. This particle-induced microdeformation could likely trigger adverse mechanotransduction and mechanosensing pathways, as well as potentially enhancing particle uptake by the cells. PMID:20634359