Sample records for valuable hardwood resources-some

  1. Fertilizing Southern Hardwoods (United States)

    W. M. Broadfoot; A. F. Ike


    If present trends continue, fertilizing may soon be economically feasible in southern hardwood stands. Demands for the wood are rising, and the acreage alloted for growing it is steadily shrinking. To supply anticipated requests for information, the U. S. Forest Service has established tree nutrition studies at the Southern Hardwoods Laboratory in Stoneville,...

  2. Manual herbicide application methods for managing vegetation in Appalachian hardwood forests (United States)

    Jeffrey D. Kochenderfer; James N. Kochenderfer; Gary W. Miller


    Four manual herbicide application methods are described for use in Appalachian hardwood forests. Stem injection, basal spray, cut-stump, and foliar spray techniques can be used to control interfering vegetation and promote the development of desirable reproduction and valuable crop trees in hardwood forests. Guidelines are presented to help the user select the...

  3. Crop tree release options for young hardwood stands in North Carolina (United States)

    Jamie L. Schuler; Daniel J. Robison


    Harvesting southern hardwood forests using even-aged reproduction methods commonly regenerate new stands with 20,000 to 50,000 stems per acre. Overstocking and an overabundance of non-commercial tree species are considered major constraints to growing productive and valuable hardwoods. Crop tree release practices have been promoted as an efficient way of thinning young...

  4. Challenging and valuable

    NARCIS (Netherlands)

    Van Hal, J.D.M.


    Challenging and valuable Inaugural speech given on May 7th 2008 at the occasion of the acceptance of the position of Professor Sustainable Housing Transformation at the faculty of Architeeture of the Delft University of Technology by Prof. J.D.M. van Hal MSc PhD.

  5. Recovering valuable liquid hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M


    A process for recovering valuable liquid hydrocarbons from coking coal, mineral coal, or oil shale through treatment with hydrogen under pressure at elevated temperature is described. Catalysts and grinding oil may be used in the process if necessary. The process provides for deashing the coal prior to hydrogenation and for preventing the coking and swelling of the deashed material. During the treatment with hydrogen, the coal is either mixed with coal low in bituminous material, such as lean coal or active coal, as a diluent or the bituminous constituents which cause the coking and swelling are removed by extraction with solvents. (BLM)

  6. Herbicide options for hardwood management (United States)

    Andrew W. Ezell; A. Brady Self


    The use of herbicides in hardwood management presents special problems in that many of the most effective herbicides are either designed to control hardwoods or the product is not labeled for such applications. Numerous studies involving herbicide application in hardwoods have been completed at Mississippi State University. This paper is a compilation of results from...

  7. Competition and climate affects US hardwood-forest tree mortality (United States)

    Daniel A. Yaussy; Louis R. Iverson; Stephen N. Matthews


    Individual-tree measurements have been collected periodically on sites established in Kentucky, New York, Ohio, and Pennsylvania to investigate the effects of thinning on the growth and yield of valuable hardwood species. These plots were installed between 1959 and 1985. The long-term characteristics of this data set of 47,853 trees allowed us to investigate potential...

  8. Hardwood sawmill downtime costs (United States)

    Jan Wiedenbeck; Kyle Blackwell


    How time flies when you don't pay attention to it. With hardwood sawmill operating costs ranging from $4 to $25 per operating minute ($95/MBF to $335/MBF) and gross profit margins ranging from $0.10/BF to $0.35/BF, five extra minutes of downtime per day will cost a sawmill that produces an average of 20,000 BF per day (5 MMBF annually) between $21 and $73 per day...

  9. Is Eastern Hardwood Sawtimber Becoming Scarcer? (United States)

    William G. Luppold; Gilbert P. Dempsey; Gilbert P. Dempsey


    In recent years the hardwood lumber industry has become increasingly concerned about the availability and quality of hardwood sawtimber. However, these concerns seem to contradict USDA Forest Service estimates of increased volume and quality of hardwood sawtimber. This paper examines changes in eastern hardwood sawtimber inventories and the apparent contradiction...

  10. 1997 Hardwood Research Award Winner: "Automatic Color Sorting of Hardwood Edge-Glued Panel Parts" (United States)

    D. Earl Kline; Richard Conners; Qiang Lu; Philip A. Araman


    The National Hardwood Lumber Association's 1997 Hardwood Research Award was presented to D. Earl Kline, Richard Conners, Qiang Lu and Philip Araman at the 25th Annual Hardwood Symposium for developing an automatic system for color sorting hardwood edge-glued panel parts. The researchers comprise a team from Virginia Tech University and the USDA Forest Service in...

  11. Recovering valuable shale oils, etc

    Energy Technology Data Exchange (ETDEWEB)

    Engler, C


    A process is described for the recovery of valuable shale oils or tars, characterized in that the oil shale is heated to about 300/sup 0/C or a temperature not exceeding this essentially and then is treated with a solvent with utilization of this heat.

  12. Harvesting costs and utilization of hardwood plantations (United States)

    Tim P. McDonald; Bryce J. Stokes


    The use of short rotation, intensive culture (SRIC) practices in hardwoods to meet fiber supply needs is becoming increasingly widespread. Total plated area of short rotation hardwood fiber plantations is currently about 22,000 ha (McDonald and Stokes 1993). That figure should certainly to grow in response to public concerns over loss of natural hardwood stands. With...

  13. In vitro propagation of tropical hardwood tree species — A review (2001-2011) (United States)

    Paula M. Pijut; Rochelle R. Beasley; Shaneka S. Lawson; Kaitlin J. Palla; Micah E. Stevens; Ying. Wang


    Tropical hardwood tree species are important economically and ecologically, and play a significant role in the biodiversity of plant and animal species within an ecosystem. There are over 600 species of tropical timbers in the world, many of which are commercially valuable in the international trade of plywood, roundwood, sawnwood, and veneer. Many of these tree...

  14. Effect of Hardwood Sawmill Edging and Trimming Practices on Furniture Part Production (United States)

    D. Earl Kline; Carmen Regalado; Eugene M. Wengert; Fred M. Lamb; Philip A. Araman


    In a recent edging and trimming study at three hardwood sawmills, it was observed that the lumber volume produced was approximately 10 percent less than would be necessary to make the most valuable lumber. Furthermore, the excess portion of wood that was removed from the edging and trimming process contained a large percentage of clear wood. In light of rising costs...

  15. Preparing valuable hydrocarbons by hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M


    A process is described for the preparation of valuable hydrocarbons by treatment of carbonaceous materials, like coal, tars, minerals oils, and their distillation and conversion products, and for refining of liquid hydrocarbon mixture obtained at raised temperature and under pressure, preferably in the presence of catalysts, by the use of hydrogen-containing gases, purified and obtained by distilling solid combustibles, characterized by the purification of the hydrogen-containing gases being accomplished for the purpose of practically complete removal of the oxygen by heating at ordinary or higher pressure in the presence of a catalyst containing silver and oxides of metals of group VI of the periodic system.

  16. Energy threat to valuable land

    International Nuclear Information System (INIS)

    Caufield, C.


    Having considered the varying estimates of future UK energy requirements which have been made, the impact on the environment arising from the use of valuable sites for energy production is examined. It is shown that energy installations of all kinds clash with areas of natural beauty or ecological importance. As an example, a recent investigation of potential sites for nuclear power stations found that most of them were on or next to sites of special scientific interest, and other areas officially designated to be regarded as special or to be protected in some way. (U.K.)

  17. Drying hardwood lumber

    Energy Technology Data Exchange (ETDEWEB)

    Chow, A T


    Dried lumber is a high-value-added product, especially when it is of high quality. Lumber damaged during the drying operation can represent substantial lost revenue. It has been demonstrated that dehumidification kilns can improve lumber quality, and reduce energy consumption over conventional drying methods. A summary of the literature on drying hardwood lumber, particularly using heat pump dehumidification, has been prepared to allow the information to be readily accessible to Ontario Hydro personnel who work with customers in the lumber industry. For that purpose, this summary has been prepared from the perspective of the customer, a dry kiln operator. Included are brief descriptions of drying schedules, precautions needed to minimize drying defects in the lumber, and rules-of-thumb for selecting and estimating the capital cost of the drying equipment. A selection of drying schedules and moisture contents of green lumber, a glossary of lumber defects and brief descriptions of the possible preventive measures are also included. 10 refs., 8 figs., 4 tabs.

  18. An Examination of Regional Hardwood Roundwood Markets in West Virginia (United States)

    William Luppold; Delton Alderman; Delton Alderman


    West Virginia?s hardwood resource is large and diverse ranging from oak-hickory forests in the southern and western portions of the state to northern hardwood stands in the northeastern region. West Virginia also has a diverse group of primary hardwood- processing industries, including hardwood grade mills, industrial hardwood sawmills, engineered wood-product...

  19. Strategic plans for the Hardwood Tree Improvement and Regeneration Center (United States)

    Charles H. Michler; Keith E. Woeste


    The mission of the Hardwood Tree Improvement and Regeneration Center (HTIRC) at Purdue University is to advance the science of hardwood tree improvement and genomics in the central hardwood region of the United States by: developing and disseminating knowledge on improving the genetic quality of hardwood tree species; conserving fine hardwood germplasm; developing...

  20. Marketing Hardwoods to Furniture Producers (United States)

    Steven A. Sinclair; Robert J. Bush; Philip A. Araman


    This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

  1. Bottomland Hardwood Ecosystem Management Project (United States)

    John A. Stanturf; Calvin E. Meier


    Federal agency approaches to land management are undergoing a shift from parcel-specific concerns toward a more holistic, ecosystem management approach. Southern bottomland hardwood ecosystems provide important environmental services and commodity goods (Wharton et al. 1982), yet much of our knowledge of these systems comes from anecdotal information. The Bottomland...

  2. Anthracnose Diseases of Eastern Hardwoods (United States)

    Frederick H. Berry


    Anthracnose diseases of hardwood trees are widespread throughout the Eastern United States. The most common symptom of these diseases is dead areas or blotches on the leaves. Because of the brown and black, scorched appearance of the leaves, the diseases are sometimes called leaf blight.

  3. Soil Management for Hardwood Production (United States)

    W. M. Broadfoot; B. G. Blackmon; J. B. Baker


    Soil management is the key to successful hardwood management because soil properties are probably the most important determinants of forest productivity. Because of the lack of soil uniformity, however, many foresters have become frustrated with attempts to relate soil to satisfactory growth. Since soil scientists have been unable to predict site quality for trees in...

  4. MVT a most valuable theorem

    CERN Document Server

    Smorynski, Craig


    This book is about the rise and supposed fall of the mean value theorem. It discusses the evolution of the theorem and the concepts behind it, how the theorem relates to other fundamental results in calculus, and modern re-evaluations of its role in the standard calculus course. The mean value theorem is one of the central results of calculus. It was called “the fundamental theorem of the differential calculus” because of its power to provide simple and rigorous proofs of basic results encountered in a first-year course in calculus. In mathematical terms, the book is a thorough treatment of this theorem and some related results in the field; in historical terms, it is not a history of calculus or mathematics, but a case study in both. MVT: A Most Valuable Theorem is aimed at those who teach calculus, especially those setting out to do so for the first time. It is also accessible to anyone who has finished the first semester of the standard course in the subject and will be of interest to undergraduate mat...

  5. Planting and care of fine hardwood seedlings: Planting hardwood seedlings in the Central Hardwood Region. (United States)

    Paula M. Pijut


    Forest tree planting in the United States on public and private land exceeded 2.6 million acres in 1999. Of that total, approximately 1.3 million acres (48 percent) were planted by private individuals (AF & PA 2001). In the Central Hardwood Region forest tree planting by private landowners exceeded 100,000 acres in 1999. Trees are planted for various reasons...

  6. The Hardwood Tree Improvement and Regeneration Center: its strategic plans for sustaining the hardwood resource (United States)

    Charles H. Michler; Michael J. Bosela; Paula M. Pijut; Keith E. Woeste


    A regional center for hardwood tree improvement, genomics, and regeneration research, development and technology transfer will focus on black walnut, black cherry, northern red oak and, in the future, on other fine hardwoods as the effort is expanded. The Hardwood Tree Improvement and Regeneration Center (HTIRC) will use molecular genetics and genomics along with...

  7. Utilization of the Eastern Hardwood Resource by the Hardwood Sawmilling Industry (United States)

    William Luppold; John Baumgras; John Baumgras


    The eastern hardwood resource contains numerous species that differ in grain, color, texture, and workability. Because the value of hardwoods is derived from appearance, these variations in physical attributes can cause the price for identical grades of hardwood lumber to vary by as much as 600% between species. As a result, there is incentive for primary processors to...

  8. The state of hardwood lumber markets (United States)

    Gilbert P. Dempsey; William G. Luppold


    Although the 1990-91 recession has temporarily dampened the demand for hardwood lumber, the decade of the 1980s was a period of strong growth in the hardwood market. After experiencing a flat market in 1980 and a decline in 1982, the demand for hardwood lumber by both the domestic industry and the export market increased strongly—from 8 billion board feet in 1982 to 11...

  9. Hardwood supply in the Pacific Northwest-a policy perspective. (United States)

    Terry L. Raettig; Kent P. Connaughton; Glenn R. Ahrens


    The policy framework for the hardwood resource and hardwood industry in western Oregon and Washington is examined. Harvesting trends, harvesting behavior of public and private landowners, and harvesting regulation are presented to complete the analysis of factors affecting short-run hardwood supply. In the short term, the supply of hardwoods is generally favorable, but...

  10. Low-grade hardwood lumber production, markets, and issues (United States)

    Dan Cumbo; Robert Smith; Philip A. Araman


    Due to recent downturn in the economy and changes in traditional hardwood markets. U.S. hardwood manufacturers are facing significant difficulties. In particular, markets for low-grade lumber have been diminishing, while increased levels of the material are being produced at hardwood sawmills in the United States. A nationwide survey of hardwood lumber manufacturers...

  11. Gluing of Eastern Hardwoods: A Review (United States)

    Terry Sellers; James R. McSween; William T. Nearn


    Over a period of years, inrreasing demand for softwoods in the Eastern United States has led to an increase in the growth of hardwoods on cut-over softwood sites. Unfortunately these hardwood trees are often of a size and shape unsuitable for the production of high-grade lumber and veneer. They do, however, represent a viable, economic soures of raw material for...

  12. Automatic Edging and Trimming of Hardwood Lumber (United States)

    D. Earl Kline; Eugene M. Wengert; Philip A. Araman


    Studies have shown that there is a potential to increase hardwood lumber value by more than 20 percent through optimum edging and trimming. Even a small portion of this percentage can boost the profitability of hardwood lumber manufacturers substantially. The objective of this research project is to develop an automated system which would assist in correct edging and...

  13. 77 FR 71017 - Hardwood Plywood From China (United States)


    ...)] Hardwood Plywood From China Determinations On the basis of the record \\1\\ developed in the subject... plywood from China that are allegedly subsidized and sold in the United States at less than fair value... and subsidized imports of hardwood plywood from China. Accordingly, effective September 27, 2012, the...

  14. Sources of the Indiana hardwood industry's competitiveness (United States)

    Silas Tora; Eva Haviarova


    The estimated 1,600 forest products-related firms in Indiana employ more than 56,000 workers. Hardwood manufacturers are the largest segment, adding approximately $2 billion per year of raw product value. A recent report by BioCrossroads ranked the hardwood industry as the most important in the agricultural sector in Indiana. Like most of the other forest products...

  15. The pallet industry: a changing hardwood market (United States)

    G.P. Dempsey; D.G. Martens


    From its inception during World War II, the wooden pallet industry has grown to become the Nation's largest industrial consumer of hardwood lumber products. Since most of the raw material in wooden pallets is lower grade lumber, the pallet industry's growth, efficiency, and changing raw material inputs must be of concern to the grade hardwood lumber industry...

  16. Management and inventory of southern hardwoods (United States)

    John A. Putnam; George M. Furnival; J.S. McKnight


    The valleys and uplands of the South outside the mountains and upper Piedmont have, since 1915, been responsible for about 45 percent of the national production of hardwood sawtimber. They are strong indications that this situation may continue indefinitely.

  17. Bottomland Hardwood Planting: Example Contract Specifications

    National Research Council Canada - National Science Library

    Humprey, Monica


    This technical note provides an example of contract specifications that can be used as a template by USACE biologists, engineers, or contracting officers for contracting the planting of bottomland hardwood (BLH) seedlings...

  18. California's hardwood resource: history and reasons for lack of a sustained hardwood industry (United States)

    Dean W. Huber; Philip M. McDonald


    Interest in utilizing California's forest-zone hardwoods for lumber and wood products has waxed and waned for more than 140 years. In spite of many unsuccessful ventures, strong interest is once again evident from landowners, processors, consumers, and policy makers. Their interest suggests a need to know past pitfalls, to recognize some realities of hardwood...

  19. Planting and care of fine hardwood seedlings: Nursery production of hardwood seedlings (United States)

    Douglass F. Jacobs


    Access to quality tree seedlings is an essential component of a successful hardwood reforestation project. Hardwood plantations may be established by sowing seed directly to a field site, but the success of direct seeding operations has been inconsistent for many species, which indicates that more research is needed before this practice can be recommended. For...

  20. A management guide for northern hardwoods in New England (United States)

    Adrian M. Gilbert; Victor S. Jensen


    Northern hardwood forests occupy about 9 million acres of land in New England. In recent years, these hardwood forests have made increasing contributions to the economy of this region. Their future management should be even more rewarding.

  1. Are there regional differences in US hardwood product exports? (United States)

    Matt Bumgardner; Scott Bowe; William Luppold


    Exporting is a critical component of the product mix for many domestic hardwood firms. Previous research has identified factors associated with hardwood lumber exporting behavior, but less is known about the advantages and disadvantages to exporting associated with the region within which a firm is located, or about exporting of secondary hardwood products. A procedure...

  2. Growth and shifts in eastern hardwood lumber production (United States)

    William G. Luppold; Gilbert P. Dempsey


    An analysis of recent trends in eastern U.S. hardwood lumber production indicates that total output increased sharply between 1977 and 1991. The increase, however, was much more pronounced in the East's northern tier of states than in the southern. This paper first examines recent hardwood lumber usage trends and historic hardwood lumber production trends. Changes...

  3. 40 years of hardwood lumber comsumption: 1963 to 2002 (United States)

    William Luppold; Matthew Bumgardner


    An analysis of hardwood lumber consumption found that demand has changed dramatically over the past four decades as a result of material substitution, changes in construction and remodeling products markets, and globalization. In 1963 furniture producers consumed 36 percent of the hardwood products lumber used by domestic manufacturers. Producers of hardwood...

  4. U.S. Hardwood Imports Grow as World Supplies Expand (United States)

    William C. Siegel; Clark Row


    Rapidly increasing imports have captured a significant share of America's hardwood markets. Total imports of hardwood raw materials and building products are now four times as large as exports. Before World War II the U. S. was a net exporter of hardwoods, and imports were limited to high-quality mahogany and specialty logs and lumber. Availability of large...

  5. Effect of vertical integration on the utilization of hardwood resources (United States)

    Jan Wiedenbeck


    The effectiveness of vertical integration in promoting the efficient utilization of the hardwood resource in the eastern United States was assessed during a series of interviews with vertically integrated hardwood manufacturers in the Appalachian region. Data from 19 companies that responded to the 1996 phone survey indicate that: 1) vertically integrated hardwood...

  6. Switchgrass a valuable biomass crop for energy

    CERN Document Server


    The demand of renewable energies is growing steadily both from policy and from industry which seeks environmentally friendly feed stocks. The recent policies enacted by the EU, USA and other industrialized countries foresee an increased interest in the cultivation of energy crops; there is clear evidence that switchgrass is one of the most promising biomass crop for energy production and bio-based economy and compounds. Switchgrass: A Valuable Biomass Crop for Energy provides a comprehensive guide to  switchgrass in terms of agricultural practices, potential use and markets, and environmental and social benefits. Considering this potential energy source from its biology, breed and crop physiology to its growth and management to the economical, social and environmental impacts, Switchgrass: A Valuable Biomass Crop for Energy brings together chapters from a range of experts in the field, including a foreword from Kenneth P. Vogel, to collect and present the environmental benefits and characteristics of this a ...

  7. Planting and care of fine hardwood seedlings: Diagnosing and controlling wildlife damage in hardwood plantations. (United States)

    James McKenna; Keith Woeste


    Once trees are planted and begin growing, damage from wildlife can threaten their quality. In this publication we discuss how to identify and manage injury to hardwoods from wildlife to minimize losses.

  8. Vulnerability of particularly valuable areas. Summary

    Energy Technology Data Exchange (ETDEWEB)



    This report is part of the scientific basis for the management plan for the North Sea and Skagerrak. The report focuses on the vulnerability of particularly valuable areas to petroleum activities, maritime transport, fisheries, land-based and coastal activities and long-range transboundary pollution. A working group with representatives from many different government agencies, headed by the Institute of Marine Research and the Directorate for Nature Management, has been responsible for drawing up the present report on behalf of the Expert Group for the North Sea and Skagerrak. The present report considers the 12 areas that were identified as particularly valuable during an earlier stage of the management plan process on the environment, natural resources and pollution. There are nine areas along the coast and three open sea areas in the North Sea that were identified according to the same predefined criteria as used for the management plans for the Barents Sea: Lofoten area and the Norwegian Sea. The most important criteria for particularly valuable areas are importance for biological production and importance for biodiversity.(Author)

  9. Vulnerability of particularly valuable areas. Summary

    International Nuclear Information System (INIS)


    This report is part of the scientific basis for the management plan for the North Sea and Skagerrak. The report focuses on the vulnerability of particularly valuable areas to petroleum activities, maritime transport, fisheries, land-based and coastal activities and long-range transboundary pollution. A working group with representatives from many different government agencies, headed by the Institute of Marine Research and the Directorate for Nature Management, has been responsible for drawing up the present report on behalf of the Expert Group for the North Sea and Skagerrak. The present report considers the 12 areas that were identified as particularly valuable during an earlier stage of the management plan process on the environment, natural resources and pollution. There are nine areas along the coast and three open sea areas in the North Sea that were identified according to the same predefined criteria as used for the management plans for the Barents Sea: Lofoten area and the Norwegian Sea. The most important criteria for particularly valuable areas are importance for biological production and importance for biodiversity.(Author)

  10. A Dynamic Model of California's Hardwood Rangelands (United States)

    Richard B. Standiford; Richard E. Howitt


    Low profitability of hardwood rangeland management, and oak tree harvesting for firewood markets and forage enhancement has led to concern about the long-term sustainability of the oak resource on rangelands. New markets for recreational hunting may give value to oaks for the habitat they provide for game species, and broaden the economic base for managers. A ranch...

  11. Guide to Regeneration of Bottomland Hardwoods (United States)

    Martha R. McKevlin


    This guide will help landowners, consulting foresters, and public service foresters regenerate bottomland hardwoods. It discusses (1) interpretation of site characteristics, (2) selection of species, and (3) selection of regeneration methods. A dichotomous key for selection of appropriate regeneration methods under various conditions is presented.

  12. Placing our northern hardwood woodlots under management (United States)

    Russell J. Hutnik


    Do you own a woodlot? Does it contain mostly northern hardwoods - that is, beech, birch, maple, and ash, with some hemlock and spruce? If the answers to these two questions are "yes," then you may be interested in the work that is carried on at the Bartlett Experimental Forest in New Hampshire. This is one of the field laboratories established by the U. S....

  13. Efficient silvicultural practices for eastern hardwood management (United States)

    Gary W. Miller; John E. Baumgras


    Eastern hardwood forests are now managed to meet a wide range of objectives, resulting in the need for silvicultural alternatives that provide timber, wildlife, aesthetics, recreation, and other benefits. However, forest management practices must continue to be efficient in terms of profiting from current harvests, protecting the environment, and sustaining production...

  14. Sampling the quality of hardwood trees (United States)

    Adrian M. Gilbert


    Anyone acquainted with the conversion of hardwood trees into wood products knows that timber has a wide range in quality. Some trees will yield better products than others. So, in addition to rate of growth and size, tree values are affected by the quality of products yielded.

  15. Chapter 10:Hardwoods for timber bridges (United States)

    James P. Wacker; Ed T. Cesa


    This chapter describes the joint efforts of the Forest Service and the FHWA to administer national programs including research, demonstration bridges, and technology transfer components. Summary information on a number of Forest Service-WIT demonstration bridges constructed with hardwoods is also provided.

  16. Proceedings, 15th central hardwood forest conference (United States)

    David S. Buckley; Wayne K. Clatterbuck; [Editors


    Proceedings of the 15th central hardwood forest conference held February 27–March 1, 2006, in Knoxville, TN. Includes 86 papers and 30 posters pertaining to forest health and protection, ecology and forest dynamics, natural and artificial regeneration, forest products, wildlife, site classification, management and forest resources, mensuration and models, soil and...

  17. Proceedings 19th Central Hardwood Forest Conference (United States)

    John W. Groninger; Eric J. Holzmueller; Clayton K. Nielsen; Daniel C., eds. Dey


    Proceedings from the 2014 Central Hardwood Forest Conference in Carbondale, IL. The published proceedings include 27 papers and 47 abstracts pertaining to research conducted on biofuels and bioenergy, forest biometrics, forest ecology and physiology, forest economics, forest health including invasive species, forest soils and hydrology, geographic information systems,...

  18. Automation for Primary Processing of Hardwoods (United States)

    Daniel L. Schmoldt


    Hardwood sawmills critically need to incorporate automation and computer technology into their operations. Social constraints, forest biology constraints, forest product market changes, and financial necessity are forcing primary processors to boost their productivity and efficiency to higher levels. The locations, extent, and types of defects found in logs and on...

  19. Stocking chart for upland central hardwoods (United States)

    Martin E. Dale; Donald E. Hilt


    The upland hardwoods stocking chart, introduced by Gingrich in 1967, has become one of the forest manager's most useful tools. The chart allows you to determine the condition of the present stand in relation to a stocking standard. The stocking of a stand is extremely helpful in prescribing various silvicultural treatments such as intermediate thinnings,...

  20. Harvesting systems for the northern forest hardwoods (United States)

    Chris B. LeDoux


    This monograph is a summary of research results and environmental compliance measures for timber harvesting operations. Data are presented from the Northern Research Station's forest inventory and analysis of 20 states in the northern forest hardwoods. Harvesting systems available in the region today are summarized. Equations for estimating harvesting costs are...

  1. A Guide to Bottomland Hardwood Restoration (United States)


    floristically Ecological Importance of Understory diverse undergrowth may serve to pollinate flowers, Plants including those of trees. Undergrowth vegetation...Herbaceous plants include bedstraw, Variants and associated vegetation. Sycamore- violet, wild carrot, wild lettuce , amsonia, mint, legumes, pecan...elements of bottomland hardwood restoration such as species selection, site preparation, direct seeding, planting of seedlings, and alternative

  2. Defining Hardwood Veneer Log Quality Attributes (United States)

    Jan Wiedenbeck; Michael Wiemann; Delton Alderman; John Baumgras; William Luppold


    This publication provides a broad spectrum of information on the hardwood veneer industry in North America. Veneer manufacturers and their customers impose guidelines in specifying wood quality attributes that are very discriminating but poorly defined (e.g., exceptional color, texture, and/or figure characteristics). To better understand and begin to define the most...

  3. Bottomland hardwood afforestation: State of the art (United States)

    Emile S. Gardiner; D. Ramsey Russell; Mark Oliver; Lamar C. Dorris


    Over the past decade, land managers have implemented large-scale afforestation operations across the Southern United States to rehabilitate agricultural land historically converted from bottomland hardwood forest cover types. These afforestation efforts were initially concentrated on public land managed by State or Federal Government agencies, but have later shifted...

  4. Applying group selection in upland hardwoods (United States)

    Gary w. Miller; H. Clay Smith


    Interest in applying group selection in upland hardwoods has grown in recent years, primarily in response to public opposition to the aesthetic effects of clearcutting. Critics suggest that an uneven-aged silvicultural practice such as group selection might be a suitable compromise--drastically reducing negative visual effects of harvesting trees while continuing to...

  5. Recovery and utilization of valuable metals from spent nuclear fuel. 3: Mutual separation of valuable metals

    International Nuclear Information System (INIS)

    Kirishima, K.; Shibayama, H.; Nakahira, H.; Shimauchi, H.; Myochin, M.; Wada, Y.; Kawase, K.; Kishimoto, Y.


    In the project ''Recovery and Utilization of Valuable Metals from Spent Fuel,'' mutual separation process of valuable metals recovered from spent fuel has been studied by using the simulated solution contained Pb, Ru, Rh, Pd and Mo. Pd was separated successfully by DHS (di-hexyl sulfide) solvent extraction method, while Pb was recovered selectively from the raffinate by neutralization precipitation of other elements. On the other hand, Rh was roughly separated by washing the precipitate with alkaline solution, so that Rh was refined by chelate resin CS-346. Outline of the mutual separation process flow sheet has been established of the combination of these techniques. The experimental results and the process flow sheet of mutual separation of valuable metals are presented in this paper

  6. Recovering valuable metals from recycled photovoltaic modules. (United States)

    Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun


    Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.

  7. [Psychopathology and film: a valuable interaction?]. (United States)

    van Duppen, Z; Summa, M; Fuchs, T


    Film or film fragments are often used in psychopathology education. However, so far there have been very few articles that have discussed the benefits and limitations of using films to explain or illustrate psychopathology. Although numerous films involves psychopathology in varying degrees, it is not clear how we can use films for psychopathology education. To examine the advantages, limitations and possible methods of using film as a means of increasing our knowledge and understanding of psychiatric illnesses. We discuss five examples that illustrate the interaction of film and psychopathology. On the one hand we explain how the psychopathological concepts are used in each film and on the other hand we explain which aspects of each film are valuable aids for teaching psychopathology. The use of film makes it possible to introduce the following topics in psychopathological teaching programme: holistic psychiatric reasoning, phenomenology and the subjective experience, the recognition of psychopathological prototypes and the importance of context. There is undoubtedly an analogy between the method we have chosen for teaching psychopathology with the help of films and the holistic approach of the psychiatrist and his or her team. We believe psychopathology education can benefit from films and we would recommend our colleagues to use it in this way.


    Directory of Open Access Journals (Sweden)

    T. A. Sannikova


    Full Text Available One of the main directions of the food industry development is the production of functional food products. Changes in the human’s diet structure cause that none of population group does receive necessary amount of vitamins, macro and microelements in healthy routine diet. To solve this problem, food stuffs enhanced by different ingredients enable to improve the biological and food value. The pumpkin is a valuable source of such important substances as carotene and pectin. Addition of garlic and hot pepper ingredients to process of pumpkin pickling enables to enrich the products with carbohydrates, proteins, microelements, which have low or no content in the pumpkin fruit. Therefore, the study of the influence of the different quantities of garlic and hot pepper additions on chemical composition of finished product is very important. The influence of plant additions used on chemical composition of finished product had been well determined. It was shown that through increased doses of garlic and hot pepper ingredients as compared with control, the carotene and dry matter content then decreased by 1.16%-3.43% in pickled pumpkin, while the pectin content depended on added component. The highest pectin content, 0.71% was observed at addition of 10 g. garlic ingredient per 1 kg. of raw matter, that was 4.1 times higher than control. With increased addition of hot pepper ingredient the pectin accumulation was decreasing from 0.58% in control to 0.36% in variant 10g. per 1kg. of raw matter.

  9. Information Sharing in the Hardwood Supply Chain


    Stiess, Timothy Stephen


    The Hardwood Industry in United States has been challenged by low-cost competition from overseas. Although cost reduction strategies have had minimal success, the proximity of industry to the domestic market has large implications on a more customer-focused strategy. The problem arises that individual companies and supply chains evolved based on the principles of economies of size and not on the flexibility to adapt to customer needs and changing resource constraints. An increased rate at ...

  10. Researching effects of prescribed fire in hardwood forests (United States)

    Stacy L. Clark; Kathleen E. Franzreb; Cathryn H. Greenberg; Tara Keyser; Susan C. Loeb; David L. Loftis; W. Henry McNab; Joy M. O' Keefe; Callie Jo Schweitzer; Martin Spetich


    The Upland Hardwood Ecology and Management Research Work Unit (RWU 4157) is a group of research teams located across the South, strategically placed to conduct research in physiographic sub-regions of the upland hardwood ecosystems including the southern Appalachian Mountains, the Cumberland Plateau, the Boston Mountains, and the Missouri Plateau. Our RWU is one of 16...

  11. An econometric model of the hardwood lumber market (United States)

    William G. Luppold


    A recursive econometric model with causal flow originating from the demand relationship is used to analyze the effects of exogenous variables on quantity and price of hardwood lumber. Wage rates, interest rates, stumpage price, lumber exports, and price of lumber demanders' output were the major factors influencing quantities demanded and supplied and hardwood...

  12. Spectral reflectance of five hardwood tree species in southern Indiana (United States)

    Dale R. Weigel; J.C. Randolph


    The use of remote sensing to identify forest species has been ongoing since the launch of Landsat-1 using MSS imagery. The ability to separate hardwoods from conifers was accomplished by the 1980s. However, distinguishing individual hardwood species is more problematic due to similar spectral and phenological characteristics. With the launch of commercial satellites...

  13. Match Your Hardwood Lumber to Current Market Needs (United States)

    Robert J. Bush; Steven A. Sinclair; Philip A. Araman


    This article explains how hardwood lumber producers can best market their product. The study included four segments of the market for hardwood lumber. These segments were: furniture, cabinet, dimension and flooring, and molding/millwork manufacturers. The article explains how the study was conducted and the characteristics of companies (i.e., potential customers) that...

  14. Silvicultural guide for northern hardwoods in the northeast (United States)

    William B. Leak; Mariko Yamasaki; Robbo. Holleran


    This revision of the 1987 silvicultural guide includes updated and expanded silvicultural information on northern hardwoods as well as additional information on wildlife habitat and the management of mixed-wood and northern hardwood-oak stands. The prescription methodology is simpler and more field-oriented. This guide also includes an appendix of familiar tables and...

  15. On Tour... Primary Hardwood Processing, Products and Recycling Unit (United States)

    Philip A. Araman; Daniel L. Schmoldt


    Housed within the Department of Wood Science and Forest Products at Virginia Polytechnic Institute is a three-person USDA Forest Service research work unit (with one vacancy) devoted to hardwood processing and recycling research. Phil Araman is the project leader of this truly unique and productive unit, titled ãPrimary Hardwood Processing, Products and Recycling.ä The...

  16. Do region and gender influence hardwood product selection? (United States)

    Delton Alderman


    Consumer preference is a fundamental focus of marketing research as it is used in developing marketing strategy and the positioning of products against competitors. This study evaluated consumer hardwood preferences of consumers from three United States geographical regions, which included six different metropolitan areas. Seven hardwood species and three laminate...

  17. Factors affecting regional changes in hardwood lumber production (United States)

    William G. Luppold; Gilbert P. Dempsey; Gilbert P. Dempsey


    Hardwood lumber production increased by nearly 1.8 billion board feet between 1986 and 1990 and decreased sharply in 1991. However, not all areas of the country experienced the same growth in hardwood lumber production during the 1980s. While lumber production in inland regions of the eastern United States and the west increased during the 1980s, lumber output in...

  18. Hardwood lumber supply chain: current status and market opportunities (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Mark Barford


    The membership of the Appalachian Hardwood Manufacturers Association was surveyed in 2005 to determine the current status of large Appalachian sawmills. The primary focus was to assess the impacts of globalization on primary manufacturing, but attention was also paid to general issues affecting the hardwood lumber supply chain-from concerns over forest health and log...

  19. A new tree classification system for southern hardwoods (United States)

    James S. Meadows; Daniel A. Jr. Skojac


    A new tree classification system for southern hardwoods is described. The new system is based on the Putnam tree classification system, originally developed by Putnam et al., 1960, Management ond inventory of southern hardwoods, Agriculture Handbook 181, US For. Sew., Washington, DC, which consists of four tree classes: (1) preferred growing stock, (2) reserve growing...

  20. Exploring research priorities for the North American hardwood industry (United States)

    David Brinberg; Earl Kline; Delton Alderman; Philip Araman; Ed Cesa; Steve Milauskas; Tom Walthousen; Jan Wiedenbeck


    With the increase of globalization, the North American hardwood industry is facing many challenges to remain competitive and sustainable, facing drastic changes in the areas of labor, land, manufacturing, markets and marketing, and supply chain. The hardwood industry is especially vulnerable, with the influx of foreign manufacturers and suppliers with greater natural...

  1. Southern hardwood forestry group going strong after 50 years (United States)

    Brian Roy Lockhart; Steve Meadows; Jeff Portwood


    On November 15,200 1, the Southern Hardwood Forestry Group (referred to as the Group) met at the U.S. Forest Service Southern Research Station's Southern Hardwoods Laboratory in Stoneville, hlississippi to celebrate the Group's 50th anniversary. About 130 members and guests attended to celebrate the 50th anniversary of the Group and to honor its charter...

  2. Nondestructive evaluation of incipient decay in hardwood logs (United States)

    Xiping Wang; Jan Wiedenbeck; Robert J. Ross; John W. Forsman; John R. Erickson; Crystal Pilon; Brian K. Brashaw


    Decay can cause significant damage to high-value hardwood timber. New nondestructive evaluation (NDE) technologies are urgently needed to effectively detect incipient decay in hardwood timber at the earliest possible stage. Currently, the primary means of inspecting timber relies on visual assessment criteria. When visual inspections are used exclusively, they provide...

  3. Hardwood genetics and tree improvement - A Midwest USA perspective (United States)

    C. H. Michler; R. Meilan; K. E. Woeste; P. M. Pijut; D. Jacobs; P. Aldrich; J. Glaubitz


    Fine hardwood trees in the Central Hardwoods region of the United States are an important resource for the furniture, cabinetry, flooring, modular home, and paneling manufacturing industries. Consumers find wood from these trees to be very desirable because of quality factors such as grain, strength and color. To enhance wood production, tree improvement programs can...

  4. Market Definition For Hardwood Timber in the Southern Appalachians (United States)

    Jeffrey P. Prestemon; John M. Pye; Karen Lee Abt; David N. Wear


    Direct estimation of aggregate hardwood supply is seriously complicated by the diversity of prices, species, and site conditions in hardwood stands. An alternative approach is to aggregate regional supply based on stumpage values of individual stands, arguably the real driver of harvest decisions. Complicating this approach is that species-specific prices are only...

  5. Central Hardwoods ecosystem vulnerability assessment and synthesis: a report from the Central Hardwoods Climate Change Response Framework project (United States)

    Leslie Brandt; Hong He; Louis Iverson; Frank R. Thompson; Patricia Butler; Stephen Handler; Maria Janowiak; P. Danielle Shannon; Chris Swanston; Matthew Albrecht; Richard Blume-Weaver; Paul Deizman; John DePuy; William D. Dijak; Gary Dinkel; Songlin Fei; D. Todd Jones-Farrand; Michael Leahy; Stephen Matthews; Paul Nelson; Brad Oberle; Judi Perez; Matthew Peters; Anantha Prasad; Jeffrey E. Schneiderman; John Shuey; Adam B. Smith; Charles Studyvin; John M. Tirpak; Jeffery W. Walk; Wen J. Wang; Laura Watts; Dale Weigel; Steve. Westin


    The forests in the Central Hardwoods Region will be affected directly and indirectly by a changing climate over the next 100 years. This assessment evaluates the vulnerability of terrestrial ecosystems in the Central Hardwoods Region of Illinois, Indiana, and Missouri to a range of future climates. Information on current forest conditions, observed climate trends,...

  6. Soil properties in 35 y old pine and hardwood plantations after conversion from mixed pine-hardwood forest (United States)

    D. Andrew Scott; Michael G. Messina


    Past management practices have changed much of the native mixed pine-hardwood forests on upland alluvial terraces of the western Gulf Coastal Plain to either pine monocultures or hardwood (angiosperm) stands. Changes in dominant tree species can alter soil chemical, biological, and physical properties and processes, thereby changing soil attributes, and ultimately,...

  7. Planting and care of fine hardwood seedlings: diseases in hardwood tree plantings (United States)

    Paula M. Pijut


    Hardwood trees planted for timber production, wildlife habitat, riparian buffers, native woodland restoration, windbreaks, watershed protection, erosion control, and conservation are susceptible to damage or even death by various native and exotic fungal or bacterial diseases. Establishment, growth, and the quality of the trees produced can be affected by these disease...

  8. Synergy of agroforestry and bottomland hardwood afforestation (United States)

    Twedt, D.J.; Portwood, J.; Clason, Terry R.


    Afforestation of bottomland hardwood forests has historically emphasized planting heavy-seeded tree species such as oak (Quercus spp.) and pecan (Caryaillinoensis) with little or no silvicultural management during stand development. Slow growth of these tree species, herbivory, competing vegetation, and limited seed dispersal, often result in restored sites that are slow to develop vertical vegetation structure and have limited tree diversity. Where soils and hydrology permit, agroforestry can provide transitional management that mitigates these historical limitations on converting cropland to forests. Planting short-rotation woody crops and intercropping using wide alleyways are two agroforestry practices that are well suited for transitional management. Weed control associated with agroforestry systems benefits planted trees by reducing competition. The resultant decrease in herbaceous cover suppresses small mammal populations and associated herbivory of trees and seeds. As a result, rapid vertical growth is possible that can 'train' under-planted, slower-growing, species and provide favorable environmental conditions for naturally invading trees. Finally, annual cropping of alleyways or rotational pulpwood harvest of woody crops provides income more rapidly than reliance on future revenue from traditional silviculture. Because of increased forest diversity, enhanced growth and development, and improved economic returns, we believe that using agroforestry as a transitional management strategy during afforestation provides greater benefits to landowners and to the environment than does traditional bottomland hardwood afforestation.

  9. Vegetative Propagation and the Genetic Improvement of North American Hardwoods (United States)

    R. E. Farmer


    Progress and problems in vegetative propagation of important North American hardwoods are reviewed with emphasis on rooting cuttings and the application of propagation techniques in breeding research. Some problems in rooting physiology are discussed.

  10. How second-growth northern hardwoods develop after thinning (United States)

    Robert W., Jr. Wilson


    In the northern hardwood region, second-growth stands occupy thousands of acres. These stands are of all ages, in all conditions. They were brought about by fire, charcoal and fuelwood cuttings, land abandonment, or a combination of these causes.

  11. Two eras of globalization and hardwood sawtimber demand (United States)

    William G. Luppold; Matthew S. Bumgardner


    In the early 1970s, the adoption of floating exchange rates resulted in more fluid transfers between international currencies and spurred increased international demand for hardwood lumber produced in the United States.

  12. The Wood and Bark of Hardwoods Growing on Southern Pine Sites - A Pictorial Atlas (United States)

    Charles W. McMillin; Floyd G. Manwiller


    Provides a pictorial description of the structure and appearance of 23 pine-site hardwoods, an overview of hardwood anatomy, and data on the resource and certain important physical properties of stemwood and bark.

  13. Examination of worldwide hardwood lumber production, trade, and apparent consumption: 1995-2013 (United States)

    William G. Luppold; Matthew S. Bumgardner


    Worldwide hardwood lumber production fluctuated between 1995 and 2013 and changed considerably with respect to regional market shares. Similarly, worldwide hardwood lumber imports and exports have been constantly changing. Understanding these changes is important because collectively, they define the hardwood lumber consumption of a region or country. In 1995, North...

  14. Decision Criteria for German Hardwood Lumber Buyers: Market Needs and Purchase (United States)

    Thomas G. Ponzurick; Robert J. Bush; Dieter Schaupp; Philip A. Araman


    The purpose of this study was to develop a better understanding of hardwood exports to the German market. A mail survey was conducted which resulted in a 47.8 percent rate of response. Of those German hardwood buyers responding to the survey, 71 percent purchased hardwood lumber directly from North America.

  15. Impacts of changing hardwood lumber consumption and price on stumpage and sawlog prices in Ohio (United States)

    William Luppold; Matthew Bumgardner; T. Eric. McConnell


    In the early 2000s, increasing US furniture imports preceded declining US hardwood lumber demand and price. In the summer of 2002, however, hardwood lumber prices started to increase as demand by construction industries increased. By the mid-2000s, hardwood lumber prices hit all-time highs. Lumber prices hit all-time highs for red oak (Quercus spp...

  16. Marketing low-grade hardwoods for furniture stock - a new approach (United States)

    Hugh W. Reynolds; Charles J. Gatchell


    A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

  17. The changing structure of the hardwood lumber industry with implications on technology adaptation (United States)

    William Luppold; John Baumgras; John Baumgras


    The hardwood sawmilling industry has been changing over the last 50 years as a result of changes in hardwood sawtimber inventory and in the demand for hardwood lumber. In 1950 the industry was composed of numerous individual mills, few of which produced more than 3 million board feet of lumber annually. During this time the furniture industry was the major user of...

  18. Genetic improvement of hardwood fiber production in the north-central region: potentials and breeding alternatives (United States)

    R.E., Jr. Farmer


    In the Lake States, aspens are now growing towards senility Faster than they are being harvested (Groff 1966). In the Central States, wood processing residues have recently supplied about one-half of the area's hardwood fiber requirement (Blyth 1970), thus allowing hardwood growing stock to continue its recuperation. In fact, the national hardwood fiber supply...

  19. Database for estimating tree responses of walnut and other hardwoods to ground cover management practices (United States)

    J.W. Van Sambeek


    The ground cover in plantings of walnut and other hardwoods can substantially affect tree growth and seed production. The number of alternative ground covers that have been suggested for establishment in tree plantings far exceeds the number that have already been tested with walnut and other temperate hardwoods. Knowing how other hardwood species respond to ground...

  20. A Comparison of Market Needs to the Species and Quality Composition of the Eastern Hardwood (United States)

    Robert J. Bush; Philip A. Araman


    Many markets for hardwood lumber have experienced growth in recent years. Eastern and Central hardwood lumber production reached an estimated 11.2 billion board feet in 1988, a twenty year high. Wood furniture, flooring, and exports have also experienced growth in the last ten years. During the same period, annual growth on eastern hardwood forests has exceeded annual...

  1. Technological advances in temperate hardwood tree improvement including breeding and molecular marker applications (United States)

    Paula M. Pijut; Keith E. Woeste; G. Vengadesan


    Hardwood forests and plantations are an important economic resource for the forest products industry worldwide and to the international trade of lumber and logs. Hardwood trees are also planted for ecological reasons, for example, wildlife habitat, native woodland restoration, and riparian buffers. The demand for quality hardwood from tree plantations will continue to...

  2. Factors influencing changes in U.S. hardwood log and lumber exports from 1990 to 2011. BioResources (United States)

    William G. Luppold; Matthew S. Bumgardner


    Domestic consumption of hardwood products in the United States since 2000 has trended downward, making exports the single most important market for higher grade hardwood lumber and a major market for higher value hardwood logs. Between 1990 and 2011, hardwood lumber exports increased by 46%. During most of this period, Canada was the largest export market for U.S....

  3. New Therapies Offer Valuable Options for Patients with Melanoma (United States)

    Two phase III clinical trials of new therapies for patients with metastatic melanoma presented in June at the 2011 ASCO conference confirmed that vemurafenib and ipilimumab (Yervoy™) offer valuable new options for the disease.

  4. Semantic Document Image Classification Based on Valuable Text Pattern

    Directory of Open Access Journals (Sweden)

    Hossein Pourghassem


    Full Text Available Knowledge extraction from detected document image is a complex problem in the field of information technology. This problem becomes more intricate when we know, a negligible percentage of the detected document images are valuable. In this paper, a segmentation-based classification algorithm is used to analysis the document image. In this algorithm, using a two-stage segmentation approach, regions of the image are detected, and then classified to document and non-document (pure region regions in the hierarchical classification. In this paper, a novel valuable definition is proposed to classify document image in to valuable or invaluable categories. The proposed algorithm is evaluated on a database consisting of the document and non-document image that provide from Internet. Experimental results show the efficiency of the proposed algorithm in the semantic document image classification. The proposed algorithm provides accuracy rate of 98.8% for valuable and invaluable document image classification problem.

  5. Valuable Internet Advertising and Customer Satisfaction Cycle(VIACSC)


    Muhammad Awais; Tanzila Samin; Muhammad Bilal


    Now-a-days it is very important for the business persons to attract their target customers towards their products through valuable mode of promotion and communication. Increasing use of World Wide Web has completely changed the scenario of business sector. Customized products and services, customers preferences, @ and dot com craze have elevated the importance of internet advertising. This research paper investigates valuable internet advertising which will help to enhance the value of intern...

  6. Automatic scanning of rough hardwood lumber for edging and trimming (United States)

    A. Lynn Abbott; Daniel L. Schmoldt; Philip A. Araman; Sang-Mook Lee


    Scanning of unplaned, green hardwood lumber has received relatively little attention in the research community. This has been due in part to the difficulty of clearly imaging fresh-cut boards whose fibrous surfaces mask many wood features. Nevertheless, it is important to improve lumber processing early in the manufacturing stream because much wood material is...

  7. A Machine Vision System for Automatically Grading Hardwood Lumber - (Proceedings) (United States)

    Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas H. Drayer; Joe G. Tront; Philip A. Araman; Robert L. Brisbon


    Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

  8. A logging residue "yield" table for Appalachian hardwoods (United States)

    A. Jeff Martin


    An equation for predicting logging-residue volume per acre for Appalachian hardwoods was developed from data collected on 20 timber sales in national forests in West Virginia and Virginia. The independent variables of type-of-cut, products removed, basal area per acre, and stand age explained 95 percent of the variation in residue volume per acre. A "yield"...

  9. Taper and volume equations for selected Appalachian hardwood species (United States)

    A. Jeff Martin


    Coefficients for five taper/volume models are developed for 18 Appalachian hardwood species. Each model can be used to estimate diameter at any point on the bole, height to any preselected diameter, and cubic-foot volume between any two points on the bole. The resulting equations were tested on six sets of independent data and an evaluation of these tests is included,...

  10. Computer Vision Systems for Hardwood Logs and Lumber (United States)

    Philip A. Araman; Tai-Hoon Cho; D. Zhu; R. Conners


    Computer vision systems being developed at Virginia Tech University with the support and cooperation from the U.S. Forest Service are presented. Researchers at Michigan State University, West Virginia University, and Mississippi State University are also members of the research team working on various parts of this research. Our goals are to help U.S. hardwood...

  11. Field testing a soil site field guide for Allegheny hardwoods (United States)

    S.B. Jones


    A site quality evaluation decision model, developed for Allegheny hardwoods on the non-glaciated Allegheny Plateau of Pennsylvania and New York, was field tested by International Paper (IP) foresters and the author, on sites within the region of derivation and on glaciated sites north and west of the Wisconsin drift line. Results from the field testing are presented...

  12. Western hardwoods : value-added research and demonstration program (United States)

    D. W. Green; W. W. Von Segen; S. A. Willits


    Research results from the value-added research and demonstration program for western hardwoods are summarized in this report. The intent of the program was to enhance the economy of the Pacific Northwest by helping local communities and forest industries produce wood products more efficiently. Emphasis was given to value-added products and barriers to increased...

  13. Regional analysis of hardwood lumber production: 1963 - 2005 (United States)

    William Luppold; Matthew Bumgardner


    Between 1963 and 2005 hardwood lumber production in the eastern United States increased by more than 50%. Production more than doubled in the northeastern and north central regions while increasing by less than 25% in the southeastern and south central regions. Increased lumber production in the northern regions was facilitated by an expanding sawtimber inventory,...

  14. The economic potential of CT scanners for hardwood sawmills (United States)

    Donald G. Hodges; Walter C. Anderson; Charles W. McMillin


    Research has demonstrated that a knowledge of internal log defects prior to sawing could improve lumber value yields significantly. This study evaluated the potential economic returns from investments in computerized tomographic (CT) scanners to detect internal defects in hardwood logs at southern sawmills. The results indicate that such investments would be profitable...

  15. Guide to wildlife tree management in New England northern hardwoods (United States)

    Carl H. Tubbs; Richard M. DeGraaf; Mariko Yamasaki; William M. Healy


    Presents information on the culture and management of trees that have value as components of wildlife habitat in the northern hardwood and associated types in New England. Background information is provided for choosing the most suitable trees for wildlife habitats and for estimat ing the impact of timber production. Suggestions are made for choosing the numbers of...

  16. Decay fungi of oaks and associated hardwoods for western arborists (United States)

    Jessie A. Glaeser; Kevin T. Smith


    Examination of trees for the presence and extent of decay should be part of any hazard tree assessment. Identification of the fungi responsible for the decay improves prediction of tree performance and the quality of management decisions, including tree pruning or removal. Scouting for Sudden Oak Death (SOD) in the West has drawn attention to hardwood tree species,...

  17. Pennsylvania hardwood timber bridges : field performance after 10 years (United States)

    James P. Wacker; Carlito Calil


    Several hardwood demonstration timber bridges were built by the Pennsylvania Department of Transportation in the early nineteen nineties. These bridge superstructures are of the recently developed stress-laminated deck design-type using Red Oak lumber laminations that were pressure-treated with creosote preservatives. This paper will describe the data acquisition...

  18. Central hardwood forests: recent trends in a robust resource (United States)

    T. W. Birch; D. A. Gansner; W. H. McWilliams


    Re-inventories completed for each of four Central Hardwood States (Kentucky, Ohio, Pennsylvania, and West Virginia) show that forest area is increasing and stocking hit new highs; there is 27 percent more growing-stock volume than a decade ago. Large increases in volume have been recorded for all but the smallest diameter classes. Volume in trees 15 inches in diameter...

  19. Testing and analysis of internal hardwood log defect prediction models (United States)

    R. Edward Thomas


    The severity and location of internal defects determine the quality and value of lumber sawn from hardwood logs. Models have been developed to predict the size and position of internal defects based on external defect indicator measurements. These models were shown to predict approximately 80% of all internal knots based on external knot indicators. However, the size...

  20. A whole stand basal area projection model for Appalachian hardwoods (United States)

    John R. Brooks; Lichun Jiang; Matthew Perkowski; Benktesh Sharma


    Two whole-stand basal area projection models were developed for Appalachian hardwood stands. The proposed equations are an algebraic difference projection form based on existing basal area and the change in age, trees per acre, and/or dominant height. Average equation error was less than 10 square feet per acre and residuals exhibited no irregular trends.

  1. Production economics of harvesting young hardwood stands in central Appalachia (United States)

    Yaoxiang Li; Jingxin Wang; Gary W. Miller; Joe McNeel


    Three harvesting systems of chainsaw/cable skidder, fell-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands of 30 to 50 years old in central Appalachia. Stands were generated by using a stand generator and harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree...

  2. A 3D stand generator for central Appalachian hardwood forests (United States)

    Jingxin Wang; Yaoxiang Li; Gary W. Miller


    A 3-dimensional (3D) stand generator was developed for central Appalachian hardwood forests. It was designed for a harvesting simulator to examine the interactions of stand, harvest, and machine. The Component Object Model (COM) was used to design and implement the program. Input to the generator includes species composition, stand density, and spatial pattern. Output...

  3. Quality index tables for some eastern hardwood species (United States)

    Joseph J. Mendel; William H. Smith; William H. Smith


    This paper briefly reviews the quality-index concept, presents log-quality index tables for a selected group of eastern hardwood tree species, and explains how timber operators can use Q.I. for evaluating the lumber that can be sawed from logs and trees.

  4. Current status of the U.S. hardwood industry (United States)

    Urs Buehlmann; Matthew Bumgardner; Michael. Sperber


    The U.S. manufacturing sector has seen challenging years during the past decades. The major driver behind the decline of U.S. manufacturing prowess has been the ongoing globalization of trade, which has brought market share losses for U.S.-based manufacturing in many hardwood lumber consuming industries. The wood furniture, flooring, and millwork industries, for...

  5. An investigation of factors affecting wettability of some southern hardwoods (United States)

    Todd F. Shupe; Chung Y. Hse; Wan H. Wang


    >Wettability of sanded and nonsanded transverse and tangential sections of 22 southern hardwood species were[was] judged by measurement of contact angles using phenol-formaldehyde resins. As ex­pected, contact angle values on transverse sec­tions were higher than on tangential sections for both sanded and...

  6. An investigation of selected factors that influence hardwood wettability (United States)

    Todd F. Shupe; Chung-Yun Hse; Wan H. Wang


    Wettability of sanded and non-sanded transverse and tangential sections of 22 southern hardwoods species was judged by measurement of contact angles using phenol formaldehyde resins. As expected, contact angle values on transverse sections were higher than those on tangential sections for both sanded and non-sanded surfaces. On sanded surfaces, hackberry had the...

  7. 78 FR 76857 - Hardwood Plywood From China; Determinations (United States)


    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-490 and 731-TA-1204 (Final)] Hardwood..., the United States International Trade Commission (Commission) determines, pursuant to sections 705(b.... International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register on June 19...

  8. An Old-Growth Definition for Southern Mixed Hardwood Forests (United States)

    William B. Batista; William J. Platt


    This report provides an old-growth definition for the southern mixed hardwood forests based on five exemplary stands that show no evidence of having undergone any natural catastrophe or clearcutting for at least 200 years. This forest type occurs in the U.S. southeastern Coastal Plain from the Carolinas to eastern Texas. The exemplary old-growth stands were restricted...

  9. Resistance of eastern hardwood stems to fire injury and damage (United States)

    Kevin T. Smith; Elaine Kennedy Sutherland


    This paper reviews the protective features and defensive responses of eastern hardwood species exposed to fire. Trees survive fire through protective features such as thick bark and the induced defenses of compartmentalization. Dissection of trees exposed to prescribed fire in an oak forest in southern Ohio highlights the need to distinguish between bark scorch, stem...

  10. Seasonal influence on Ohio hardwood stumpage price trends (United States)

    T. Eric. McConnell


    The average annual percentage rates of change in real sawtimber stumpage prices from 1978 through 2012 (dollars per thousand board feet, Doyle) for the 10 commercial hardwood species of Ohio were determined. Each species was then further examined for differing trend lines between the spring and fall reporting periods. Annual real rates of change ranged from -1.10...

  11. Validation of an internal hardwood log defect prediction model (United States)

    R. Edward. Thomas


    The type, size, and location of internal defects dictate the grade and value of lumber sawn from hardwood logs. However, acquiring internal defect knowledge with x-ray/computed-tomography or magnetic-resonance imaging technology can be expensive both in time and cost. An alternative approach uses prediction models based on correlations among external defect indicators...

  12. Comparison of Germination and Viability Tests for Southern Hardwood Seed (United States)

    F. T. Bonner; J. L. Gammage


    This paper summarizes a 3-year evaluation of 10 methods for testing germinability and viability of the seed of six species of southern hardwood. In five of the methods, the seeds were germinated. In the others, visual, biochemical, or physical properties were the criteria. Cutting tests were best for sweetgum and Nuttall oak seed, while cutting or water germination...

  13. Machine Vision Systems for Processing Hardwood Lumber and Logs (United States)

    Philip A. Araman; Daniel L. Schmoldt; Tai-Hoon Cho; Dongping Zhu; Richard W. Conners; D. Earl Kline


    Machine vision and automated processing systems are under development at Virginia Tech University with support and cooperation from the USDA Forest Service. Our goals are to help U.S. hardwood producers automate, reduce costs, increase product volume and value recovery, and market higher value, more accurately graded and described products. Any vision system is...

  14. Influence of Lumber Volume Maximization in Sawing Hardwood Sawlogs (United States)

    Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman


    The Best Opening Face (BOF) technology for volume maximization during sawing has been rapidly adopted by softwood sawmills. Application of this technology in hardwood sawmills has been limited because of their emphasis on sawing for the highest possible grade of lumber. The reason for this emphasis is that there is a relatively large difference in price between the...

  15. Software analyzes feasibility of saw kerf reduction for hardwood mills (United States)

    Philip H. Steele


    Reductions in saw kerf on head rigs and resaws can dramatically increase lumber recovery in hardwood sawmills. Research has shown that lumber sawing variation reduction will increase lumber recovery above that obtained solely from kerf reduction. Reductions in sawing machine kerf or variation always come at some cost in both capital and variable costs. Determining...

  16. Interactive machine learning for postprocessing CT images of hardwood logs (United States)

    Erol Sarigul; A. Lynn Abbott; Daniel L. Schmoldt


    This paper concerns the nondestructive evaluation of hardwood logs through the analysis of computed tomography (CT) images. Several studies have shown that the commercial value of resulting boards can be increased substantially if log sawing strategies are chosen using prior knowledge of internal log defects. Although CT imaging offers a potential means of obtaining...

  17. Upland hardwood habitat types in southwestern North Dakota (United States)

    Michele M. Girard; Harold Goetz; Ardell J. Bjugstad


    The Daubenmire habitat type method was used to classify the upland hardwood draws of southwestern North Dakota. Preliminary data analysis indicates there are four upland habitat types: Fraxinus pennsylvanica/Prunus virginiana; F. pnnseanica-Ulmus americana/P. virginiana; Populus...

  18. Edge-glued panels from Alaska hardwoods: retail manager perspectives (United States)

    David Nicholls; Matthew Bumgardner; Valerie Barber


    In Alaska, red alder (Alnus rubra Bong.) and paper birch (Betula papyrifera Marsh.) are both lesser-known hardwoods grown, harvested, and manufactured into appearance products, with potential for increased utilization. The production of edgeglued panels from red alder and paper birch offers one expansion opportunity for wood...

  19. Reproduction of upland hardwood forests in the central states (United States)

    Ivan L. Sander; F. Bryan Clark


    This handbook summarizes data from studies of central hardwood reproduction after harvest cuttings ranging from single-tree selection cutting to complete clearcutting. Regardless of how the stands were cut, natural reproduction was always adequate to produce acceptable new stands; but the heavier cuttings favored intolerant species and faster growth of all species....

  20. Growth and Survival of Northern Hardwood Sprouts After Burning (United States)

    Donald A. Perala


    Root collar sprouting of nine hardwoods was measured annually after a prescribed burn. Basswood, red oak, and paper birch were the most vigorous sprouters; sugar maple and yellow birch the least; and American elm, bur oak, ironwood and red maple were intermediate. Parent tree diameter influenced spreading.

  1. Indicators of regenerative capacity for eastern hardwood forests (United States)

    William H. McWilliams; Todd W. Bowersox; Patrick H. Brose; Daniel A. Devlin; James C. Finley; Steve Horsley; Kurt W. Gottschalk; Tonya W. Lister; Larry H. McCormick; Gary W. Miller; Kim C. Steiner; Susan L. Stout; James A. Westfall; Robert L. White


    Hardwood forests of the eastern United States are characterized by a complex mix of species associations that make it difficult to construct useful indicators of long-term sustainability, in terms of future forest composition and stocking levels. The Pennsylvania Regeneration Study examines regeneration adequacy in the state. The study uses the Forest Service's...

  2. A procedure for selection on marking in hardwoods (United States)

    George R., Jr. Trimble; Joseph J. Mendel; Richard A. Kennell


    This method of applying individual-tree selection silviculture to hardwood stands combines silvicultural considerations with financial maturity guidelines into a tree-marking system. To develop this system it was necessary to determine rates of return based on 4/4 lumber, for many of the important Appalachian species. Trees were viewed as capital investments that...

  3. Private forest owners of the Central Hardwood Forest (United States)

    Thomas W. Birch


    A recently completed survey of woodland owners provides insight into the owners of private forest lands in the Central Hardwood Region. There is increasing parcelization of forested lands and an increase in the numbers of nonindustrial private forest-land owners. Over half of the private owners have harvested timber from their holdings at some time in the past, they...

  4. Chapter 4:Grading and properties of hardwood structural lumber (United States)

    David W. Green


    Structural lumber markets have traditionally been dominated by softwood species. Historically, however, hardwood species have been extensively used for certain structural products such as timbers for railway and highway bridges, railway ties, mine timbers, and for pallets and containers. In the 1920s, when uniform procedures were first developed for structural grading...

  5. Fire in Eastern Hardwood Forests through 14,000 Years (United States)

    Martin A. Spetich; Roger W. Perry; Craig A. Harper; Stacy L. Clark


    Fire helped shape the structure and species composition of hardwood forests of the eastern United States over the past 14,000 years. Periodic fires were common in much of this area prior to European settlement, and fire-resilient species proliferated. Early European settlers commonly adopted Native American techniques of applying fire to the landscape. As the demand...

  6. Economic considerations of uneven-age hardwood management (United States)

    H. Clay Smith; Gary W. Miller


    Uneven-age management or partial cutting methods as described in this paper allow foresters to manage eastern hardwood stands and harvest forest products without clearcutting. These methods can involve regular periodic harvests, at least for the short term, based on stand conditions and growing-site capabilities. We are not going to make the decision as to which is the...

  7. A century of progress in weed control in hardwood seedbeds (United States)

    David B. South


    Weeds have existed in nurseries since before the time Bartram grew hardwoods during the 18th century. Hand weeding was the primary method of weed control during the first part of the 20th century. From 1931 to 1970, advances in chemistry increased the use of herbicides, and advances in engineering increased the reliance on machines for cultivation. Many managers now...

  8. A Multiple Sensor Machine Vision System Technology for the Hardwood (United States)

    Richard W. Conners; D.Earl Kline; Philip A. Araman


    For the last few years the authors have been extolling the virtues of a multiple sensor approach to hardwood defect detection. Since 1989 the authors have actively been trying to develop such a system. This paper details some of the successes and failures that have been experienced to date. It also discusses what remains to be done and gives time lines for the...

  9. Sawtooth forces in cutting tropical hardwoods native to South America (United States)

    S. P. Loehnertz; I. V. Cooz

    As a result of design, operation, and maintenance, sawblades used in tropical sawmills can cause many problems. Improvements in these areas are needed to reduce the waste associated with sawing of tropical species that are regarded as difficult to cut. In this study, cutting experiments that simulated bandsawing of tropical hardwoods showed the effect of chip...

  10. Field Trips as Valuable Learning Experiences in Geography Courses (United States)

    Krakowka, Amy Richmond


    Field trips have been acknowledged as valuable learning experiences in geography. This article uses Kolb's (1984) experiential learning model to discuss how students learn and how field trips can help enhance learning. Using Kolb's experiential learning theory as a guide in the design of field trips helps ensure that field trips contribute to…

  11. an assessment of timber trees producing valuable fruits and seeds ...

    African Journals Online (AJOL)


    It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

  12. Ravens reconcile after aggressive conflicts with valuable partners. (United States)

    Fraser, Orlaith N; Bugnyar, Thomas


    Reconciliation, a post-conflict affiliative interaction between former opponents, is an important mechanism for reducing the costs of aggressive conflict in primates and some other mammals as it may repair the opponents' relationship and reduce post-conflict distress. Opponents who share a valuable relationship are expected to be more likely to reconcile as for such partners the benefits of relationship repair should outweigh the risk of renewed aggression. In birds, however, post-conflict behavior has thus far been marked by an apparent absence of reconciliation, suggested to result either from differing avian and mammalian strategies or because birds may not share valuable relationships with partners with whom they engage in aggressive conflict. Here, we demonstrate the occurrence of reconciliation in a group of captive subadult ravens (Corvus corax) and show that it is more likely to occur after conflicts between partners who share a valuable relationship. Furthermore, former opponents were less likely to engage in renewed aggression following reconciliation, suggesting that reconciliation repairs damage caused to their relationship by the preceding conflict. Our findings suggest not only that primate-like valuable relationships exist outside the pair bond in birds, but that such partners may employ the same mechanisms in birds as in primates to ensure that the benefits afforded by their relationships are maintained even when conflicts of interest escalate into aggression. These results provide further support for a convergent evolution of social strategies in avian and mammalian species.

  13. Salt Lakes of the African Rift System: A Valuable Research ...

    African Journals Online (AJOL)

    Salt Lakes of the African Rift System: A Valuable Research Opportunity for Insight into Nature's Concenrtated Multi-Electrolyte Science. JYN Philip, DMS Mosha. Abstract. The Tanzanian rift system salt lakes present significant cultural, ecological, recreational and economical values. Beyond the wealth of minerals, resources ...

  14. Valuable human capital: the aging health care worker. (United States)

    Collins, Sandra K; Collins, Kevin S


    With the workforce growing older and the supply of younger workers diminishing, it is critical for health care managers to understand the factors necessary to capitalize on their vintage employees. Retaining this segment of the workforce has a multitude of benefits including the preservation of valuable intellectual capital, which is necessary to ensure that health care organizations maintain their competitive advantage in the consumer-driven market. Retaining the aging employee is possible if health care managers learn the motivators and training differences associated with this category of the workforce. These employees should be considered a valuable resource of human capital because without their extensive expertise, intense loyalty and work ethic, and superior customer service skills, health care organizations could suffer severe economic repercussions in the near future.



    Vladimir I. Zagvyazinsky


    The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a...

  16. Development of radiation processes wood-polymer composites based on tropical hardwoods

    International Nuclear Information System (INIS)

    Iya, V.K.; Majali, A.B.


    The wood-polymer composites based on tropical hardwoods were prepared with three monomer systems. Use of chlorinated paraffin oil as an additive imparted fire resistance to the composites and also brought down the gamma dose requirement for total polymerisation. A number of tropical hardwoods can be upgraded by radiation curing, but for cost optimisation, hardwoods with high improvement per unit polymer should be selected. (author)

  17. Valuable metals - recovery processes, current trends, and recycling strategies

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)


    This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Extraction of toxic and valuable metals from foundry sands

    International Nuclear Information System (INIS)

    Vite T, J.


    There were extracted valuable metals from foundry sands such as: gold, platinum, silver, cobalt, germanium, nickel and zinc among others, as well as highly toxic metals such as chromium, lead, vanadium and arsenic. The extraction efficiency was up to 100% in some cases. For this reason there were obtained two patents at the United States, patent number 5,356,601, in October 1994, given for the developed process and patent number 5,376,000, in December 1994, obtained for the equipment employed. Therefore, the preliminary parameters for the installation of a pilot plant have also been developed. (Author)

  19. Herbicide hardwood crop tree release in central West Virginia (United States)

    Jeffrey D. Kochenderfer; Shepard M. Zedaker; James E. Johnson; David W. Smith; Gary W. Miller


    Chemical crop tree release treatments were applied to young hardwood stands at three sites in central West Virginia to evaluate the effectiveness of glyphosate as Accord (41.5% SL), imazapyr as Arsenal AC (53.1% SL) and Chopper (27.6% EC), and triclopyr as Garlon 3A (44.4% triethylamine salt SL), and Garlon 4 (61.6% butoxyethyl ester EC) using hack-and-squirt injection...

  20. Chemical Weed Control Increases Survival and Growth in Hardwood Plantings (United States)

    Gayne G. Erdmann


    In a plantation of four hardwood species on a silt loam soil planted to 1-0 stock, 4 pounds of active atrazine or simazine controlled weeds effectively without injuring the trees. Chemical weed control was better on plowed and disked ground than on unprepared ground. Yellow-poplar and white ash grew faster on prepared ground. Black walnut and red oak did not respond...

  1. Preliminary Genomic Characterization of Ten Hardwood Tree Species from Multiplexed Low Coverage Whole Genome Sequencing.

    Directory of Open Access Journals (Sweden)

    Margaret Staton

    Full Text Available Forest health issues are on the rise in the United States, resulting from introduction of alien pests and diseases, coupled with abiotic stresses related to climate change. Increasingly, forest scientists are finding genetic/genomic resources valuable in addressing forest health issues. For a set of ten ecologically and economically important native hardwood tree species representing a broad phylogenetic spectrum, we used low coverage whole genome sequencing from multiplex Illumina paired ends to economically profile their genomic content. For six species, the genome content was further analyzed by flow cytometry in order to determine the nuclear genome size. Sequencing yielded a depth of 0.8X to 7.5X, from which in silico analysis yielded preliminary estimates of gene and repetitive sequence content in the genome for each species. Thousands of genomic SSRs were identified, with a clear predisposition toward dinucleotide repeats and AT-rich repeat motifs. Flanking primers were designed for SSR loci for all ten species, ranging from 891 loci in sugar maple to 18,167 in redbay. In summary, we have demonstrated that useful preliminary genome information including repeat content, gene content and useful SSR markers can be obtained at low cost and time input from a single lane of Illumina multiplex sequence.

  2. Canopy structure and tree condition of young, mature, and old-growth Douglas-fir/hardwood forests (United States)

    B.B. Bingham; J.O. Sawyer


    Sixty-two Douglas-fir/hardwood stands ranging from 40 to 560 years old were used to characterize the density; diameter, and height class distributions of canopy hardwoods and conifers in young (40 -100 yr), mature (101 - 200 yr) and old-growth (>200 yr) forests. The crown, bole, disease, disturbance, and cavity conditions of canopy conifers and hardwoods were...

  3. Assessing changes in the U.S. hardwood sawmill industry with a focus on markets and distribution (United States)

    Omar Espinoza; Urs Buehlmann; Matthew Bumgardner; Bob. Smith


    The U.S. hardwood sawmilling industry has experienced significant changes over the past decade. A slowing housing industry, competition from imported products, higher transportation costs, and high stumpage prices have changed the business of manufacturing and marketing hardwood lumber. Also, hardwood lumber buyers are changing their business practices by shortening...

  4. Optimizing wildlife habitat quality and oak regeneration in bottomland hardwoods using midstory control and partial harvests (United States)

    Derek K. Alkire; Andrew W. Ezell; Andrew B. Self


    Bottomland hardwoods can provide both wildlife habitat and timber. However, past high-grading practices limit future income potential and have resulted in undesirable species composition in many areas. Thus, prevalence of desirable oak species should be increased. Our study will attempt to determine the proper harvest level for bottomland hardwoods which will optimize...

  5. Stand conditions immediately following a restoration harvest in an old-growth pine-hardwood remnant (United States)

    D. C. Bragg


    Portions of the Levi Wilcoxon Demonstration Forest (LWDF), a privately owned parcel of old-growth pine and hardwoods in Ashley County, Arkansas, were recently treated to restore conditions similar to some historic accounts of the virgin forest. Following a hardwood-only cut, a post-harvest inventory showed that the number of tree species in the sample area declined...

  6. Possible Demands for Eastern Hardwoods Resulting from Harvest Restrictions in the Pacific (United States)

    Janice K. Wiedenbeck; Philip A. Araman


    Efforts to conserve the habitat of the northern spotted owl in the Pacific Northwest have placed softwood timber supplies under a great deal of pressure and driven up the price of softwood lumber. Hardwoods could meet some of the demand for products that have previously been manufactured from softwood species. Hardwood structural lumber may soon become an economically...

  7. Automatic Color Sorting System for Hardwood Edge-Glued Panel Parts (United States)

    Richard W. Conners; D.Earl Kline; Philip A. Araman


    The color sorting of edge-glued panel parts is becoming more important in the manufacture of hardwood products. Consumers, while admiring the natural appearance of hardwoods, do not like excessive color variation across product surfaces. Color uniformity is particularly important today because of the popularity of lightly stained products. Unfortunately, color sorting...

  8. Timber, Browse, and Herbage on Selected Loblolly-Shortleaf Pine-Hardwood Forest Stands (United States)

    Gale L. Wolters; Alton Martin; Warren P. Clary


    A thorough vegetation inventory was made on loblolly-shortleaf pine-hardwood stands scheduled by forest industry for clearcutting, site preparation, and planting to pine in north central Louisiana and southern Arkansas. Overstory timber, on the average, contained about equal proportions of softwood and hardwood basal area. Browse plants ranged from 5,500 to over 70,...

  9. Weight, Volume, and Physical Properties of Major Hardwood Species in the Upland-South (United States)

    Alexander Clark; Douglas R. Phillips; Douglas J. Frederick


    The weight, volume, and physical properties oftrees1 to 20 inchesd.b.h.were determined for sweetgum, yellow-poplar, hickory, post oak, scarlet oak, southern red oak, and white oakin northern Alabama and Mississippi, eastern Arkansas, southern Kentucky and Tennessee. Hard hardwoods, soft hardwoods, and individual species equations are presented for predicting green and...

  10. Using fire to restore pine/hardwood ecosystems in the Southern Appalachians of North Carolina (United States)

    James M. Vose; Wayne T. Swank; Barton D. Clinton; Ronald L. Hendrick; Amy E. Major


    In the Southern Appalachians, mixed pine/hardwood ecosystems occupy the most xeric sites (i.e., south/west aspect ridge sites). They are typically comprised of varying proportions of pitch pine (Pinus rigida), Virginia pine (Pinus virginiana), and/or shortleaf pine (Pinus echinata) and a mixture of hardwoods, including scarlet oak (Quercus coccinea), chestnut oak (...

  11. International trade of U.S. hardwood lumber and logs, 1990-2013 (United States)

    William G. Luppold; Matthew S. Bumgardner


    United States (U.S.) hardwood log and lumber exports surged in the early- and mid-1970s in response to the adoption of floating exchange rates. However, assessing these changes in international trade became difficult in the 1980s due to increased underreporting of hardwood lumber and log shipments between the U.S. and Canada. By 1990, these data problems were rectified...

  12. Assessing the feasibility and profitability of cable logging in southern upland hardwood forests (United States)

    Chris B. LeDoux; Dennis M. May; Tony Johnson; Richard H. Widmann


    Procedures developed to assess available timber supplies from upland hardwood forest statistics reported by the USDA Forest Services' Forest Inventory and Analysis unit were modified to assess the feasibility and profitability of cable logging in southern upland hardwood forests. Depending on the harvest system and yarding distance used, cable logging can be...

  13. An economic assessment of implementing streamside management zones in central Appalachian hardwood forests (United States)

    Yaoxiang Li; Chris B. LeDoux; Jingxin Wang


    The effects of variable width of streamside management zones (25, 50, 75, and 100 ft) (SMZs) and removal level of trees (10%, 30%, and 50% of basal area) on production and cost of implementing SMZs in central Appalachian hardwood forests were simulated by using a computer model. Harvesting operations were performed on an 80-year-old generated natural hardwood stand...

  14. Key to utilization of hardwoods on pine sites: the shaping-lathe headrig (United States)

    P. Koch


    In past years, only 30% of southern pine biomass (above- and below-ground parts) ended as primary product. Moreover, hardwoods on pine sites were, and in many cases still are, destroyed with no thought of utilization. Now, however, processes have been invented that can raise utilization of each tree- pine and hardwood on pine sites a like to 67% of total biomass,...

  15. U.S. hardwood fiber demand and supply situation : globalization and structural change (United States)

    Peter J. Ince; Irene Durbak


    This paper reviews demand and supply trends for hardwood fiber in the United States. The objective is to illustrate nationwide shifts in demand and supply and show how the hardwood pulpwood market reacts to those shifts at a regional level. Thus, the market situation is illustrated using an economic rationale, and trends are projected under assumptions about future...

  16. Nondestructive evaluation of hardwood logs:CT scanning, machine vision and data utilization (United States)

    Daniel L. Schmoldt; Luis G. Occena; A. Lynn Abbott; Nand K. Gupta


    Sawing of hardwood logs still relies on relatively simple technologies that, in spite of their lack of sophistication, have been successful for many years due to wood?s traditional low cost and ready availability. These characteristics of the hardwood resource have changed dramatically over the past 20 years, however, forcing wood processors to become more efficient in...

  17. Trends in the US hardwood lumber distribution industry: changing products, customers, and services (United States)

    Urs Buehlmann; Omar Espinoza; Matthew Bumgardner; Bob. Smith


    Efficient and effective supply chains are the backbone of any industry, including the forest products industry. As the US secondary hardwood industry has undergone a profound transformation and large parts of the industry have moved offshore, the supply chain is adapting to these new realities. Remaining and new customers of US hardwood lumber distributors tend to be...

  18. Quantifying flooding effects on hardwood seedling survival and growth for bottomland restoration (United States)

    John M. Kabrick; Daniel C. Dey; J.W. Van Sambeek; Mark V. Coggeshall; Douglass F. Jacobs


    Growing interest worldwide in bottomland hardwood restoration necessitates improved ecological understanding of flooding effects on forest tree seedlings using methodology that accurately reflects field conditions. We examined hardwood seedling survival and growth in an outdoor laboratory where the timing, depth, duration, and flow rate of flood water can be carefully...

  19. An Integrated Management Support and Production Control System for Hardwood Forest Products (United States)

    Guillermo A. Mendoza; Roger J. Meimban; William Sprouse; William G. Luppold; Philip A. Araman


    Spreadsheet and simulation models are tools which enable users to analyze a large number of variables affecting hardwood material utilization and profit in a systematic fashion. This paper describes two spreadsheet models; SEASaw and SEAIn, and a hardwood sawmill simulator. SEASaw is designed to estimate the amount of conversion from timber to lumber, while SEAIn is a...

  20. Harem: Hardwood lumber remanufacturing program for maxmizing value based on size, grade and current market prices (United States)

    C.J. Schwehm; P. Klinkhachorn; Charles W. McMillin; Henry A. Huber


    This paper describes an expert system computer program which will determine the optimum way to edge and trim a hardwood board so as to yield the highest dollar value based on the grade, size of each board, and current market prices. The program uses the Automated Hardwood Lumber Grading Program written by Klinkhachorn, et al. for determining the grade of each board...

  1. Factors affecting the merchandising of hardwood logs in the southern tier of New York (United States)

    John E. Wagner; Bryan Smalley; William Luppold


    In many areas of the eastern United States, hardwood boles are sawn into logs and then separated by product before proceeding to future processing. This type of product merchandising is facilitated by large differences in the relative value of hardwood logs of different species and grades. The objective of this study was to analyze the factors influencing the...

  2. Effects of group-selection timber harvest in bottomland hardwoods on fall migrant birds (United States)

    John C. Kilgo; Karl V. Miller; Winston P. Smith


    Due to projected demands for hardwood timber, development of silvicultural practices that provide for adequate regeneration in southeastern bottomland hardwoods without causing undue harm to wildlife resources is critical. Group-selection silviculture involves harvesting a small group of trees, which creates a canopy gap (usually

  3. Timber harvesting patterns for major states in the central, northern, and mid-Atlantic hardwood regions (United States)

    William G. Luppold; Matthew S. Bumgardner


    Timber harvesting is a major disturbance agent influencing the composition and structure of eastern hardwood forests. To better understand timber harvesting practices, we examined roundwood harvesting patterns in 13 eastern states in the Central, Mid-Atlantic, and Northern regions that contained high proportional volumes of hardwood in their forest inventories. Nearly...

  4. Status and trends of bottomland hardwood forests in the mid-Atlantic Region (United States)

    Anita Rose; Steve Meadows


    Bottomland hardwood forests cover approximately 2.9 million acres of the Coastal Plain and Piedmont region of Virginia and North Carolina. As of 2014, 59 percent of bottomland hardwood forests were in the large-diameter stand-size class. Between 2002 and 2014, area of large-diameter sized stands increased, while that of medium- and small-diameter stands decreased,...

  5. Consumer ring count and grain texture preferences of selected eastern United States hardwoods (United States)

    Delton Alderman; Matthew Bumgardner; Scott Bowe; David Brinberg


    Historically, eastern hardwoods have been a staple of forest products production. However, hardwood producers are now faced with serious challenges from substitutable products, such as imports of foreign species, utilization of foreign species in overseas manufacture (e.g., case goods, etc.), and composite-based materials that are imported or manufactured here in the...

  6. Animals as an indicator of carbon sequestration and valuable landscapes

    Directory of Open Access Journals (Sweden)

    Jan Szyszko


    Full Text Available Possibilities of the assessment of a landscape with the use of succession development stages, monitored with the value of the Mean Individual Biomass (MIB of carabid beetles and the occurrence of bird species are discussed on the basis of an example from Poland. Higher variability of the MIB value in space signifies a greater biodiversity. Apart from the variability of MIB, it is suggested to adopt the occurrence of the following animals as indicators, (in the order of importance, representing underlying valuable landscapes: black stork, lesser spotted eagle, white-tailed eagle, wolf, crane and white stork. The higher number of these species and their greater density indicate a higher value of the landscape for biodiversity and ecosystem services, especially carbon sequestration. All these indicators may be useful to assess measures for sustainable land use.

  7. Metagenomes provide valuable comparative information on soil microeukaryotes

    DEFF Research Database (Denmark)

    Jacquiod, Samuel Jehan Auguste; Stenbæk, Jonas; Santos, Susana


    has been identified. Our analyses suggest that publicly available metagenome data can provide valuable information on soil microeukaryotes for comparative purposes when handled appropriately, complementing the current view provided by ribosomal amplicon sequencing methods......., providing microbiologists with substantial amounts of accessible information. We took advantage of public metagenomes in order to investigate microeukaryote communities in a well characterized grassland soil. The data gathered allowed the evaluation of several factors impacting the community structure......, including the DNA extraction method, the database choice and also the annotation procedure. While most studies on soil microeukaryotes are based on sequencing of PCR-amplified taxonomic markers (18S rRNA genes, ITS regions), this work represents, to our knowledge, the first report based solely...


    Directory of Open Access Journals (Sweden)

    E. A. Zablotskaya


    Full Text Available The study of the correlation relationship between the signs, the informativeness of the indicators makes it possible to conduct a preliminary assessment of the plants and more objectively to identify forms with high economically valuable characteristics. Their integrated assessment will identify the best source material for further selection. In literary sources, information on the correlation in broccoli between yields and its elements are not the same. The purpose of our study was to analyze the contingency of various traits and to identify significant correlation links between quantitative traits in broccoli hybrids (42 samples. They were obtained using doubled haploid lines (DH-line of early maturity at 2 planting dates (spring and summer. Studies were conducted in the Odintsovo district of the Moscow region in field experience in 2015, 2016. Significant influence on growth and development was provided by the developing weather conditions during the growing period. The fluctuation of humidification and temperature conditions differed significantly during the years of study and the time of planting, which is an important circumstance for analyzing the data obtained. Based on the results of the research, it was concluded that the value of the correlation coefficient and the strength of the correlation relationship between the characteristics (mass, diameter, head height, plant height, vegetation period are different and depend on the set of test specimens and growing conditions. A significant stable manifestation of positive correlation was revealed during all the years of research and the time of planting between the diameter and mass of the head (r = 0.45-0.96. The variability of the correlation of other economically valuable traits is marked. 

  9. Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Stephen [SIMBOL Materials


    Executive Summary Simbol Materials studied various methods of extracting valuable minerals from geothermal brines in the Imperial Valley of California, focusing on the extraction of lithium, manganese, zinc and potassium. New methods were explored for managing the potential impact of silica fouling on mineral extraction equipment, and for converting silica management by-products into commercial products.` Studies at the laboratory and bench scale focused on manganese, zinc and potassium extraction and the conversion of silica management by-products into valuable commercial products. The processes for extracting lithium and producing lithium carbonate and lithium hydroxide products were developed at the laboratory scale and scaled up to pilot-scale. Several sorbents designed to extract lithium as lithium chloride from geothermal brine were developed at the laboratory scale and subsequently scaled-up for testing in the lithium extraction pilot plant. Lithium The results of the lithium studies generated the confidence for Simbol to scale its process to commercial operation. The key steps of the process were demonstrated during its development at pilot scale: 1. Silica management. 2. Lithium extraction. 3. Purification. 4. Concentration. 5. Conversion into lithium hydroxide and lithium carbonate products. Results show that greater than 95% of the lithium can be extracted from geothermal brine as lithium chloride, and that the chemical yield in converting lithium chloride to lithium hydroxide and lithium carbonate products is greater than 90%. The product purity produced from the process is consistent with battery grade lithium carbonate and lithium hydroxide. Manganese and zinc Processes for the extraction of zinc and manganese from geothermal brine were developed. It was shown that they could be converted into zinc metal and electrolytic manganese dioxide after purification. These processes were evaluated for their economic potential, and at the present time Simbol

  10. Conversion of waste polystyrene through catalytic degradation into valuable products

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Jasmin; Jan, Muhammad Rasul; Adnan [University of Peshawar, Peshawar (Pakistan)


    Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 .deg. C for 30 min in case of Mg and at 400 .deg. C for 2 h both for MgO and MgCO{sub 3} catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO{sub 3} catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 .deg. C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.

  11. GC Analyses of Salvia Seeds as Valuable Essential Oil Source

    Directory of Open Access Journals (Sweden)

    Mouna Ben Taârit


    Full Text Available The essential oils of seeds of Salvia verbenaca, Salvia officinalis, and Salvia sclarea were obtained by hydrodistillation and analyzed by gas chromatography (GC and GC-mass spectrometry. The oil yields (w/w were 0.050, 0.047, and 0.045% in S. verbenaca, S. sclarea, and S. officinalis, respectively. Seventy-five compounds were identified. The essential oil composition of S. verbenaca seeds showed that over 57% of the detected compounds were oxygenated monoterpenes followed by sesquiterpenes (24.04% and labdane type diterpenes (5.61%. The main essential oil constituents were camphor (38.94%, caryophyllene oxide (7.28%, and 13-epi-manool (5.61%, while those of essential oil of S. officinalis were α-thujone (14.77%, camphor (13.08%, and 1,8-cineole (6.66%. In samples of S. sclarea, essential oil consists mainly of linalool (24.25%, α-thujene (7.48%, linalyl acetate (6.90%, germacrene-D (5.88%, bicyclogermacrene (4.29%, and α-copaene (4.08%. This variability leads to a large range of naturally occurring volatile compounds with valuable industrial and pharmaceutical outlets.

  12. Sea Buckthorn Oil—A Valuable Source for Cosmeceuticals

    Directory of Open Access Journals (Sweden)

    Marijana Koskovac


    Full Text Available Sea buckthorn (Hippophae rhamnoides L., Elaeagnaceae. is a thorny shrub that has small, yellow to dark orange, soft, juicy berries. Due to hydrophilic and lipophilic ingredients, berries have been used as food and medicine. Sea buckthorn (SB oil derived from berries is a source of valuable ingredients for cosmeceuticals. The unique combination of SB oil ingredients, in qualitative and quantitative aspects, provides multiple benefits of SB oil for internal and external use. Externally, SB oil can be applied in both healthy and damaged skin (burns or skin damage of different etiology, as it has good wound healing properties. Due to the well-balanced content of fatty acids, carotenoids, and vitamins, SB oil may be incorporated in cosmeceuticals for dry, flaky, burned, irritated, or rapidly ageing skin. There have been more than 100 ingredients identified in SB oil, some of which are rare in the plant kingdom (e.g., the ratio of palmitoleic to γ-linolenic acid. This review discusses facts related to the origin and properties of SB oil that make it suitable for cosmeceutical formulation.


    Directory of Open Access Journals (Sweden)

    Vladimir I. Zagvyazinsky


    Full Text Available The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a worker, a specialist; also the author emphasizes on requirement of the stimulating, but not strictly regulated management of education. It is proved that copying of the western model of consecutive individualization of education without preserving the collectivist beginning is unacceptable in training, especially in educational process. In more general, strategic foreshortening this means that parity of the problem resolution of economy and the social sphere with which it is impossible to cope without support and educational development and first of all education, it is especially important during the periods of economic crises and stagnation for providing an exit from a crisis state on the basis of the advancing preparation and rational use of the personnel which neatly are considered as a human capital. Practical significance. Resources and positive tendencies in a development of education, especially elite, and also educational systems of some territories, including the Tyumen region where traditions of the enthusiasts-pioneers mastering the remote territories of oil and gas fields remain are shown. 

  14. Rabeto plus: a valuable drug for managing functional dyspepsia. (United States)

    Ghosh, Asim; Halder, Susanta; Mandal, Sanjoy; Mandal, Arpan; Basu, Mitali; Dabholkar, Pareen


    The aim of the study was to evaluate and document the efficacy and tolerability of rabeto plus (FDC of rabeprazole and itopride) in management of functional dyspepsia. It was an open, prospective, non-comparative, multidose study. The patients with functional dyspepsia (NERD or non-erosive reflux disease) attending OPD of a leading, tertiary care, teaching hospital in West Bengal (BS Medical College, Bankura) were inducted in the study. A total of 46 adult patients of either sex with functional dyspepsia and a clinical diagnosis of NERD were given 1 capsule of rabeto plus before breakfast, for up to 4 weeks. Primary efficacy variables were relief from symptoms of heartburn, nausea, vomiting, waterbrash and fullness. Secondary efficacy variables were global assessment of efficacy and toleration by patients and treating physicians. The tolerability was assessed on the basis of record of spontaneously reported adverse events with their nature, intensity and outcome. Out of 55 patients enrolled in the study, 46 completed the study as planned, while 9 patients were lost to follow-up (dropped). Most patients reported near total symptom relief by the end of study. Total symptom score showed remarkable and significant improvement from baseline to end of the study. Importantly, none of the patients reported any side-effect. All participants tolerated the drug well. Moreover, response to study drug was rated as excellent or good by over 93% patients and their treating physicians. This means that 9 out 10 patients receiving rabeto plus reported desired symptom relief from dyspepsia. Thus it was concluded that rabeto plus is a valuable drug for treatment of functional dyspepsia or NERD.

  15. Whey-derived valuable products obtained by microbial fermentation. (United States)

    Pescuma, Micaela; de Valdez, Graciela Font; Mozzi, Fernanda


    Whey, the main by-product of the cheese industry, is considered as an important pollutant due to its high chemical and biological oxygen demand. Whey, often considered as waste, has high nutritional value and can be used to obtain value-added products, although some of them need expensive enzymatic synthesis. An economical alternative to transform whey into valuable products is through bacterial or yeast fermentations and by accumulation during algae growth. Fermentative processes can be applied either to produce individual compounds or to formulate new foods and beverages. In the first case, a considerable amount of research has been directed to obtain biofuels able to replace those derived from petrol. In addition, the possibility of replacing petrol-derived plastics by biodegradable polymers synthesized during bacterial fermentation of whey has been sought. Further, the ability of different organisms to produce metabolites commonly used in the food and pharmaceutical industries (i.e., lactic acid, lactobionic acid, polysaccharides, etc.) using whey as growth substrate has been studied. On the other hand, new low-cost functional whey-based foods and beverages leveraging the high nutritional quality of whey have been formulated, highlighting the health-promoting effects of fermented whey-derived products. This review aims to gather the multiple uses of whey as sustainable raw material for the production of individual compounds, foods, and beverages by microbial fermentation. This is the first work to give an overview on the microbial transformation of whey as raw material into a large repertoire of industrially relevant foods and products.

  16. Recycled Cell Phones - A Treasure Trove of Valuable Metals (United States)

    Sullivan, Daniel E.


    This U.S. Geological Survey (USGS) Fact Sheet examines the potential value of recycling the metals found in obsolete cell phones. Cell phones seem ubiquitous in the United States and commonplace throughout most of the world. There were approximately 1 billion cell phones in use worldwide in 2002. In the United States, the number of cell phone subscribers increased from 340,000 in 1985 to 180 million in 2004. Worldwide, cell phone sales have increased from slightly more than 100 million units per year in 1997 to an estimated 779 million units per year in 2005. Cell phone sales are projected to exceed 1 billion units per year in 2009, with an estimated 2.6 billion cell phones in use by the end of that year. The U.S. Environmental Protection Agency estimated that, by 2005, as many as 130 million cell phones would be retired annually in the United States. The nonprofit organization INFORM, Inc., anticipated that, by 2005, a total of 500 million obsolete cell phones would have accumulated in consumers' desk drawers, store rooms, or other storage, awaiting disposal. Typically, cell phones are used for only 1 1/2 years before being replaced. Less than 1 percent of the millions of cell phones retired and discarded annually are recycled. When large numbers of cell phones become obsolete, large quantities of valuable metals end up either in storage or in landfills. The amount of metals potentially recoverable would make a significant addition to total metals recovered from recycling in the United States and would supplement virgin metals derived from mining.

  17. Removal of selected pollutants from aqueous media by hardwood mulch

    International Nuclear Information System (INIS)

    Ray, Asim B.; Selvakumar, Ariamalar; Tafuri, Anthony N.


    Generic hardwood mulch, usually used for landscaping, was utilized to remove several selected pollutants (heavy metals and toxic organic compounds) typically found in urban stormwater (SW) runoff. The hardwood mulch sorbed all the selected pollutants from a spiked stormwater mixture, including copper (Cu 2+ ), cadmium (Cd 2+ ), chromium (Cr 6+ ), lead (Pb 2+ ), zinc (Zn 2+ ), 1,3 dichlorobenzene (DCB), naphthalene (NP), fluoranthene (FA), butylbenzylphthalate (BBP), and benzo(a)pyrene (B[a]P). Masses of the pollutants sorbed depended upon the pollutant species, contact time, and initial concentration which varied from 20 to 100%. Sorption rates of the metals, in general, were more rapid than those of the organics; however, mass removals (percent) of the organics, in contrast to those of the metals, were independent of their initial concentrations. With the exception of Cd, percentages (weight) of the metals removed declined as their initial concentrations decreased. None of the sorbed pollutants desorbed to any significant extent upon extended washing with water. It is quite feasible that in the presence of mulch the uptake of these pollutants by the aquatic species will be reduced significantly

  18. Avian response to bottomland hardwood reforestation: the first 10 years (United States)

    Twedt, D.J.; Wilson, R.R.; Henne-Kerr, J.L.; Grosshuesch, D.A.


    Bttomland hardwood forests were planted on agricultural fields in Mississippi and Louisiana using either predominantly Quercus species (oaks) or Populus deltoides (eastern cottonwood). We assessed avian colonization of these reforested sites between 2 and 10 years after planting. Rapid vertical growth of cottonwoods (circa 2 - 3 m / yr) resulted in sites with forest structure that supported greater species richness of breeding birds, increased Shannon diversity indices, and supported greater territory densities than on sites planted with slower-growing oak species. Grassland birds (Spiza americana [Dickcissel], and Sturnella magna [Eastern Meadowlark]) were indicative of species breeding on oak-dominated reforestation # 10 years old. Agelaius phoeniceus (Red-winged Blackbird) and Colinus virginianus (Northern Bobwhite) characterized cottonwood reforestation # 4 years old, whereas 14 species of shrub-scrub birds (e.g., Passerina cyanea [Indigo Bunting]) and early-successional forest birds (e.g., Vireo gilvus [Warbling Vireo]) typified cottonwood reforestation 5 to 9 years after planting. Rates of daily nest survival did not differ between reforestation strategies. Nest parasitism increased markedly in older cottonwood stands, but was overwhelmed by predation as a cause of nest failure. Based on Partners in Flight prioritization scores and territory densities, the value of cottonwood reforestation for avian conservation was significantly greater than that of oak reforestation during their first 10 years. Because of benefits conferred on breeding birds, we recommend reforestation of bottomland hardwoods include a high proportion of fast-growing, early successional species such as cottonwood.

  19. Biomass models to estimate carbon stocks for hardwood tree species

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Peinado, R.; Montero, G.; Rio, M. del


    To estimate forest carbon pools from forest inventories it is necessary to have biomass models or biomass expansion factors. In this study, tree biomass models were developed for the main hardwood forest species in Spain: Alnus glutinosa, Castanea sativa, Ceratonia siliqua, Eucalyptus globulus, Fagus sylvatica, Fraxinus angustifolia, Olea europaea var. sylvestris, Populus x euramericana, Quercus canariensis, Quercus faginea, Quercus ilex, Quercus pyrenaica and Quercus suber. Different tree biomass components were considered: stem with bark, branches of different sizes, above and belowground biomass. For each species, a system of equations was fitted using seemingly unrelated regression, fulfilling the additivity property between biomass components. Diameter and total height were explored as independent variables. All models included tree diameter whereas for the majority of species, total height was only considered in the stem biomass models and in some of the branch models. The comparison of the new biomass models with previous models fitted separately for each tree component indicated an improvement in the accuracy of the models. A mean reduction of 20% in the root mean square error and a mean increase in the model efficiency of 7% in comparison with recently published models. So, the fitted models allow estimating more accurately the biomass stock in hardwood species from the Spanish National Forest Inventory data. (Author) 45 refs.

  20. Catalytic conversion of CO2 into valuable products

    International Nuclear Information System (INIS)

    Pham-Huu, C.; Ledoux, M.J.


    inertness the recovery of the active phase is extremely easy, i.e. acidic or basic washing, which reduce the cost investment of the process for the final spent catalyst disposal and the fully re-use of the support. The high thermal conductivity of the SiC support could also allow the reduction of the temperature loss during the reaction taken into account the high endothermicity of the reaction. The aim of the presentation is to report the synthesis and use of SiC-based catalyst for CO 2 reforming which allows the conversion of CO 2 into a more valuable products for further fuel processing via the Fischer-Tropsch synthesis

  1. Microbial Leaching of Some Valuable Elements From Egyptian Phosphate Rock

    International Nuclear Information System (INIS)

    Kamal, H.M.; Hassanein, R.A.; Mahdy, H.M.A.; Mahmoud, K.F.; Abouzeid, M.A.


    Four phosphate rock samples representing different phosphate mineralization modes in Egypt were selected from Abu Tartar, Nile valley and Red sea areas. Factors affecting the phosphate rock solubilization and some of the contained valuable elements by Aspergillus niger, Penicillium sp. and Pseudomonas fluorescence, were studied with especial orientation towards the completion of phosphate rock samples solubilization especially die low grade one. Effect of nitrogen source type on leaching efficiency by Aspergillus niger when two nitrogen sources on the phosphate bioleaching efficiency, it is clear that the ammonium chloride is more favorable as nitrogen source than sodium nitrate in the bioleaching of phosphate rocks. When Aspergillus niger was applied under die following conditions: 50 g/1 of sucrose as a carbon source, 0.1 N of ammonium chloride as a nitrogen source, 10 days incubation period, 0.5% solid: liquid ratio for P 2 O 5 and 5% for U and REE and - 270 mesh of grain size. The optimum leaching of P 2 O 5 , U and REE from phosphate rock samples reached (23.27%, 17.4%, 11.4%, respectively), while at -60 mesh they reached to 16.58%, 28.9%, 30.2% respectively. The optimum conditions for the maximal leaching efficiencies of P 2 O 5 , U and REE when applying the Penicillium sp. from the phosphate rock samples were: 100 g/1 of sucrose as a carbon source for P 2 O 5 and U and 10 g/1 for REE, 7,15 and 10 days incubation period for P 2 O 5 , U and REE, respectively, 0.5% solid: liquid ratio for P 2 O 5 and 5% for U and REE. Finally, the application of phosphate rock samples grinded to -270 mesh of grain size for P 2 O 5 and (-60 to -140) for U and REE. The studied leaching efficiency of P 2 O 5 , U and REE gave at -270 mesh 33.66%, 24.3%, 15.9% respectively, while at -60 mesh they gave 33.76%, 26.7%, 17.8% and at -140 mesh gave 31.32%, 27.9%, 17.6%, respectively.The optimum conditions for the P 2 O 5 leaching efficiency when applying the Pseudomonas fluorescence were

  2. Manager's handbook for northern hardwoods in the north-central states. (United States)

    Carl H. Tubbs


    Provides a key for the resource manager to use in choosing silvicultural practices for the management of northern hardwoods. Control of stand composition, growth, and stand establishment for timber production, water, wildlife, and recreation are discussed.

  3. Promotion of adventitious root formation of difficult-to-root hardwood tree species (United States)

    Paula M. Pijut; Keith E. Woeste; Charles H. Michler


    North American hardwood tree species, such as alder (Alnus spp.), ash (Fraxinus spp.), basswood (Tilia spp.), beech (Fagus spp.), birch (Betula spp.), black cherry (Prunus seratina), black walnut (Juglans nigra), black willow (...

  4. Carbon Storage of bottomland hardwood afforestation in the Lower Mississippi Valley, U.S.A. (United States)

    David T. Shoch; Gary Kaster; Aaron Hohl; Ray Souter


    The emerging carbon market is an increasingly important source of finance for bottomland hardwood afforestation in the Lower Mississippi River Valley (LMV). Notwithstanding, there is a scarcity of empirical...

  5. Comparison of two cut-to-length harvesting systems operating in eastern hardwoods (United States)

    Chris B. LeDoux; Niel K. Huyler


    We compared production rates, operating costs, and break-even points (BEP) for small and large cut-to-length (CTL) harvesting systems operating at several machine utilization rates (MUR) in mixed hardwood and softwood stands in Vermont.

  6. Photo guide for estimating risk to hardwood trees during prescribed burning operations in eastern oak forests (United States)

    Patrick H. Brose


    A field guide of 40 photographs of common hardwood trees of eastern oak forests and fuel loadings surrounding their bases. The guide contains instructions on how to rapidly assess a tree's likelihood to be damaged or killed by prescribed burning.

  7. The shaping-lathe headrig-- key to utilization of hardwoods growing on southern pine sites (United States)

    P. Koch


    For every cubic foot of pine on southern pine sites, there is about 0.8 cubic foot of hardwood. The shaping-lathe headrig, now in the final stages of commercialization, is a key to utilizing these small mixed hardwoods for pallets and industrial lumber. Lathe residues in the form of flakes can be the raw material for a new major industry manufacturing exterior...

  8. Tree regeneration by seed in bottomland hardwood forests: A review (United States)

    Kroschel, Whitney A.; King, Sammy L.; Keim, Richard F.


    Bottomland hardwood forests (BLH) are found in temperate, humid regions of the southeastern US, primarily on alluvial floodplains adjacent to rivers. Altered hydrology in rivers and floodplains has caused changes in stand development and species composition of BLHs. We hypothesize that the driving mechanisms behind these changes are related to the regeneration process because of the complexity of recruitment and the vulnerability of species at that age in development. Here we review the state of our understanding regarding BLH regeneration, and identify potential bottlenecks throughout the stages of seed production, seed dispersal, germination, establishment, and survival. Our process-level understanding of regeneration by seed in BLHs is rudimentary, thus limiting our ability to predict the effects of hydrologic alterations on species composition. By focusing future research on the appropriate stages of regeneration, we can better understand the sources of forest-community transitions across the diverse range of BLH systems.

  9. Facilitating Oak and Hickory Regeneration in Mature Central Hardwood Forests

    Directory of Open Access Journals (Sweden)

    Eric J. Holzmueller


    Full Text Available Advanced oak and hickory regeneration is often absent in mature oak-hickory forests in the Central Hardwood Region of the United States. Prescribed fire and thinning, alone and combined, are commonly prescribed silvicultural treatments that are recommended to initiate the regeneration process. This study examined the regeneration response in three mature oak stands following four treatments: (1 thin, (2 burn, (3 thinning and burning, or (4 no treatment (control. Ten years after initial treatment, results indicate that oak and hickory seedlings had greater height and diameter in the thinning and burning treatment compared to the control and that this treatment may help facilitate desirable regeneration in mature oak-hickory forests.

  10. Nine-year performance of four hardwoods on a harvested site with and without fertilizer tree shelters, and weed mats in southern Illinois (United States)

    Felix, Jr. Ponder; J.W. Van Sambeek


    Quality hardwood species often dominate stands on intermediate to high quality sites before regeneration. However, successfully regenerating these species after the harvest is rarely achieved on these sites. Hardwood species were planted on a high quality site in southern Illinois after clearcutting to study the effect of several cultural practices on the hardwoods...

  11. Valuable Virality

    NARCIS (Netherlands)

    Akpinar, E.; Berger, Jonah


    Given recent interest in social media, many brands now create content that they hope consumers will view and share with peers. While some campaigns indeed go “viral,” their value to the brand is limited if they do not boost brand evaluation or increase purchase. Consequently, a key question is how

  12. Valuable Connections

    DEFF Research Database (Denmark)

    Kjærsgaard, Mette Gislev; Smith, Rachel Charlotte


    and blurred boundaries between physical, digital and hybrid contexts, as well as design, production and use, we might need to rethink the role of ethnography within design and business development. Perhaps the aim is less about ”getting closer” to user needs and real-life contexts, through familiarization......, mediation, advocacy and facilitation, as in conventional approaches to ethnography in user centred design, and more about creating a critical theoretically informed distance from which to perceive and reflect upon complex interconnections between people, technology, business and design, as well as our roles...

  13. Valuable Connections

    DEFF Research Database (Denmark)

    Kjærsgaard, Mette Gislev; Smith, Rachel Charlotte


    , as well as design, production and use, we might need to rethink the role of ethnography within user centred design and business development. Here the challenge is less about ”getting closer” to user needs and real-life contexts, through familiarization, mediation, and facilitation, and more about creating...... a critical theoretically informed distance from which to perceive and reflect upon complex interconnections between people, technology, business and design, as well as our roles as researchers and designers within these....

  14. Capitals, assets, and resources: some critical issues. (United States)

    Savage, Mike; Warde, Alan; Devine, Fiona


    This paper explores the potential of Bourdieu's approach to capital as a way of understanding class dynamics in contemporary capitalism. Recent rethinking of class analysis has sought to move beyond what Rosemary Crompton (1998) calls the 'employment aggregate approach', one which involves categorizing people into class groups according to whether they have certain attributes (e.g. occupations). Instead, recent contributions by Pierre Bourdieu, Erik Wright, Aage Sorensen, and Charles Tilly have concentrated on understanding the mechanisms that produce class inequalities. Concepts such as assets, capitals and resources (CARs) are often used to explain how class inequalities are produced, but there remain ambiguities and differences in how such terms are understood. This paper identifies problems faced both by game theoretical Marxism and by the rational choice approach of Goldthorpe in developing an adequate approach to CARs. It then turns to critically consider how elements of Bourdieu's approach, where his concept of capital is related to those of habitus and field, might overcome these weaknesses. Our rendering of his arguments leads us to conclude that our understanding of CARs might be enriched by considering how capital is distinctive not in terms of distinct relations of exploitation, but through its potential to accumulate and to be converted to other resources. This focus, we suggest, sidesteps otherwise intractable problems in CAR based approaches.

  15. Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain (United States)

    Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa


    Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

  16. Thirteen Year Loblolly Pine Growth Following Machine Application of Cut-Stump Treament Herbicides For Hardwood Stump-Sprout Control (United States)

    Clyde G. Vidrine; John C. Adams


    Thirteen year growth results of 1-0 out-planted loblolly pine seedlings on nonintensively prepared up-land mixed pine-hardwood sites receiving machine applied cut-stump treatment (CST) herbicides onto hardwood stumps at the time of harvesting is presented. Plantation pine growth shows significantly higher growth for pine in the CST treated plots compared to non-CST...

  17. Development of the selection system in northern hardwood forests of the Lake States: an 80-year silviculture research legacy (United States)

    Christel Kern; Gus Erdmann; Laura Kenefic; Brian Palik; Terry. Strong


    The northern hardwood research program at the Dukes Experimental Forest in Michigan and Argonne Experimental Forest in Wisconsin has been adapting to changing management and social objectives for more than 80 years. In 1926, the first northern hardwood silviculture study was established in old-growth stands at the Dukes Experimental Forest. In response to social...

  18. Employment changes in U.S. hardwood lumber consuming industries during economic expansions and contractions since 1991 (United States)

    William G. Luppold; Matt Bumgardner


    Understanding employment trends is important for discerning the economic vitality of U.S. hardwood lumber users. After a period of growth in the 1990s, employment in industries consuming hardwood lumber has declined in the 21st century. The wood household furniture industry has experienced the greatest decline, with North Carolina, Virginia, and California being the...

  19. Relationships between prescribed burning and wildfire occurrence and intensity in pine-hardwood forests in north Mississippi, USA (United States)

    Stephen Brewer; Corey Rogers


    Using Geographic Information Systems and US Forest Service data, we examined relationships between prescribed burning (from 1979 to 2000) and the incidence, size, and intensity of wildfires (from 1995 to 2000) in a landscape containing formerly fire-suppressed, closed-canopy hardwood and pine-hardwood forests. Results of hazard (failure) analyses did not show an...

  20. Composting of organically amended/treated hardwood and softwood sawdust

    International Nuclear Information System (INIS)

    Takyi-Lartey, Rita


    Sawdust is a major waste produced by the wood industry. Adding value to sawdust through composting is one of the surest means by which environmental pollution could be minimized. About 500 kg of softwood and hardwood sawdust were separately mixed with mucuna leaves and kitchen waste in the ratio of 3:1:1 on weight basis and heaped using effluent from abattoir to develop composts. Objectives of the study were to monitor changes in the physico-chemical properties, NH4"+ ‒ N, NO3"‒ ‒ N, C:N ratio, minerals N, K, P, microbial load and toxic elements in the composts during a 12 week period. Germination test was also done to evaluate the stability and maturity of the composts developed. Degradation of softwood sawdust compost (SSC) was better in the mesophilic phase while that of hardwood sawdust compost (HSC) occurred in the thermophilic phase. Thus, significantly higher amount of the organic material in SSC was decomposed during the period as compared to HSC. Also, greater percentage of the nitrogen in the initial material of SSC was converted into plant-available inorganic nitrogen (NH4"+ and NO3"‒) than was achieved in HSC. Hence, most of the mineral nitrogen in HSC that was converted was lost, probably in the thermophilic phase. On the contrary, the amount of organic nitrogen contained in the finished composts of both SSC and HSC were adequately good for application to the soil. Additionally, concentrations of pathogenic microorganisms in SSC and HSC products were within acceptable limits in terms of toxicity on growing plants. The softwood sawdust compost was relatively more stable as compared to HSC under the experimental conditions. Concentrations of heavy metals in both SSC and HSC were also within acceptable limits that would cause no toxicity to plants. Also, moisture contents in both SSC and HSC were within the good range (40 - 60%) required for a good compost. Thus both SSC and HSC produced were of good quality. Further research targeting specific

  1. Sediment retention in a bottomland hardwood wetland in Eastern Arkansas (United States)

    Kleiss, B.A.


    One of the often-stated functions of wetlands is their ability to remove sediments and other particulates from water, thus improving water quality in the adjacent aquatic system. However, actual rates of suspended sediment removal have rarely been measured in freshwater wetland systems. To address this issue, suspended sediment dynamics were measured in a 85-km2 bottomland hardwood (BLH) wetland adjacent to the highly turbid Cache River in eastern Arkansas during the 1988-1990 water years. A suspended sediment mass balance was calculated using depth-integrated, flow-weighted daily measurements at wetland inflow and outflow points. Over the three-year period, suspended sediment load decreased an average of 14% between upstream and downstream sampling points. To test the idea that the suspended sediments were retained by the adjacent wetland and to determine what portion of the BLH forest was most responsible for retaining the suspended sediments, concurrent measurements of sediment accretion were made at 30 sites in the wetland using feldspar clay marker horizons, sedimentation disks, the 137cesium method, and dendrogeomorphic techniques. Sedimentation rates exceeding 1 cm/yr were measured in frequently flooded areas dominated by Nyssa aquatica and Taxodium distichum. Maximum sedimentation rates did not occur on the natural levee, as would be predicted by classical fluvial geomorphology, but in the "first bottom," where retention time of the water reached a maximum. Multiple regression was used to relate sedimentation rates with several physical and biological factors. A combination of distance from the river, flood duration, and tree basal area accounted for nearly 90% of the variation in sedimentation rates.

  2. A case report on inVALUABLE: insect value chain in a circular bioeconomy

    DEFF Research Database (Denmark)

    Heckmann, L.-H.; Andersen, J.L.; Eilenberg, J.


    partners span the entire value chain and include entrepreneurs, experts in biology, biotechnology, automation, processing and food tech and safety. This paper provides an overview of the goal, activities and some preliminary results obtained during the first year of the project.......The vision of inVALUABLE is to create a sustainable resource-efficient industry for animal production based on insects. inVALUABLE has focus on the R&D demand for scaling up production of insects in Denmark and assessing the application potential of particularly mealworms. The inVALUABLE consortium...

  3. Effects of herbicide release on the growth of 8- to 12-year-old hardwood trees (United States)

    G.W. Wendel; Neil I. Lamson; Neil I. Lamson


    In 8- to 12-year-old Appalachian hardwood stands, crop trees were released by stem injecting competing trees with a 20 percent aqueous solution of glyphosate. Species released were black cherry, red oak, and sugar maple. Release treatments were (a) injection of all trees within a 5-foot radius of the crop tree bole and (b) injections of all trees whose crown touched...

  4. Bottomland Hardwoods of the Mississippi Alluvial Valley: Characteristics and Management of Natural Function, Structure, and Composition (United States)

    Paul B. Hamel; Thomas L. Foti; [Editors


    A symposium entitled "Bottomland hardwoods of the Mississippi Alluvial Valley: characteristics and management of natural function, structure, and composition" convened on October 28, 1995, as part of the Natural Areas Conference, October 25-28, 1995, In Fayetteville, AR. The symposium's goal was to provide informatibn that managers need to begin...

  5. Ten year regeneration of southern Appalachian hardwood clearcuts after controlling residual trees (United States)

    P.M. Zaldivar-Garcia; D.T. Tew


    Two upland hardwood stands were clearcut in 1978 and three treatments to control the unmerchantable and/or cull trees were applied. The treatments applied to the residual trees were chainsaw felling, herbicide injection, and a control, where residual trees were left standing. Regeneration was sampled 10 years after the cutting.

  6. A Machine Vision System for Automatically Grading Hardwood Lumber - (Industrial Metrology) (United States)

    Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas T. Drayer; Philip A. Araman; Robert L. Brisbon


    Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

  7. Automated grading, upgrading, and cuttings prediction of surfaced dry hardwood lumber (United States)

    Sang-Mook Lee; Phil Araman; A.Lynn Abbott; Matthew F. Winn


    This paper concerns the scanning, sawing, and grading of kiln-dried hardwood lumber. A prototype system is described that uses laser sources and a video camera to scan boards. The system automatically detects defects and wane, searches for optimal sawing solutions, and then estimates the grades of the boards that would result. The goal is to derive maximum commercial...

  8. A Multiple Sensor Machine Vision System for Automatic Hardwood Feature Detection (United States)

    D. Earl Kline; Richard W. Conners; Daniel L. Schmoldt; Philip A. Araman; Robert L. Brisbin


    A multiple sensor machine vision prototype is being developed to scan full size hardwood lumber at industrial speeds for automatically detecting features such as knots holes, wane, stain, splits, checks, and color. The prototype integrates a multiple sensor imaging system, a materials handling system, a computer system, and application software. The prototype provides...

  9. Hardwood log grades and lumber grade yields for factory lumber logs (United States)

    Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast


    The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

  10. Climatic and pollution influences on ecosystem processes in northern hardwood forests (United States)

    Kurt S. Pregitzer; David D. Reed; Glenn D. Mroz; Andrew J. Burton; John A. Witter; Donald A. Zak


    The Michigan gradient study was established in 1987 to examine the effects of climate and atmospheric deposition on forest productivity and ecosystem processes in the Great Lakes region. Four intensively-monitored northern hardwood study sites are located along a climatic and pollutant gradient extending from southern lower Michigan to northwestern upper Michigan. The...

  11. Suitability of the line intersect method for sampling hardwood logging residues (United States)

    A. Jeff Martin


    The line intersect method of sampling logging residues was tested in Appalachian hardwoods and was found to provide unbiased estimates of the volume of residue in cubic feet per acre. Thirty-two chains of sample line were established on each of sixteen 1-acre plots on cutover areas in a variety of conditions. Estimates from these samples were then compared to actual...

  12. Weight, Volume, and Physical Properties of Major Hardwood Species in the Piedmont (United States)

    Alexander Clark; Douglas R. Phillips; Douglas J. Frederick


    Weight, volume, and physical properties of trees 1 to 20 inches d.b.h.were determined for red maple, sweetgum, sycamore, yellow-poplar, elm, hickory, chestnut oak, scarlet oak, southern red oak, and white oak in the Piedmont of the Southeastern United States. A total of 772 trees were destructively sampled at 16 locations from Viryinia to Alabama. Hard hardwoods, soft...

  13. Relationships between growth, quality, and stocking within managed old-growth northern hardwoods (United States)

    Chris Gronewold; Anthony W. D' Amato; Brian J. Palik


    An understanding of long-term growth dynamics is central to the development of sustainable uneven-aged silvicultural systems for northern hardwood forests in eastern North America. Of particular importance are quantitative assessments of the relationships between stocking control and long-term growth and quality development. This study examined these relationships in a...

  14. 77 FR 65172 - Hardwood and Decorative Plywood From the People's Republic of China: Initiation of Antidumping... (United States)


    ... feel are relevant to the development of an accurate listing of physical characteristics. Specifically... Department of Commerce building. In determining whether Petitioners have standing under section 732(c)(4)(A... hardwood and decorative plywood sold by Chinese exporters, as identified in affidavits regarding U.S. price...

  15. Impact of harvesting and atmospheric pollution on nutrient depletion of eastern US hardwood forests (United States)

    M.B. Adams; J.A. Burger; A.B. Jenkins; L. Zelazny


    The eastern hardwood forests of the US may be threatened by the changing atmospheric chemistry and by changes in harvesting levels. Many studies have documented accelerated base cation losses with intensive forest harvesting. Acidic deposition can also alter nutrient cycling in these forests. The combination of increased harvesting, shorter rotations, and more...

  16. Reptile and amphibian response to season of burn in an upland hardwood forest (United States)

    Cathryn H. Greenberg; Tyler Seiboldt; Tara L. Keyser; W. Henry McNab; Patrick Scott; Janis Bush; Christopher E. Moorman


    Growing-season burns are increasingly used in upland hardwood forest for multiple forest management goals. Many species of reptiles and amphibians are ground-dwelling, potentially increasing their vulnerability to prescribed fire, especially during the growing-season when they are most active. We used drift fences with pitfall traps to experimentally assess how...

  17. Use of plastic films for weed control during field establishment of micropropagated hardwoods (United States)

    J. W. Van Sambeek; John E. Preece; Carl A. Huetteman; Paul L. Roth


    This study compares the use of plastic films to conventional methods for establishing hardwoods on a recently cultivated old field site using 1-year-old micropropagated plantlets of white ash (Fraxinus americana L.) and silver maple (Acer saccharinum L.). After one growing season in the field, height of plantlets with all weed...

  18. Influence of Product and Supplier Attributes on Hardwood Lumber Purchase Decisions (United States)

    Craig L. Forbes; Steven A. Sinclair; Robert J. Bush; Philip A. Araman


    This study determined the influence of product and supplier attributes on hardwood lumber purchases by wood furniture manufacturers and investigated differences across manufacturer type, geographic region, firm size, and kiln ownership. Professional lumber buyers rated the importance and difference across suppliers of various attributes. Purchase influence scores were...

  19. Snag Condition and Woodpecker Foraging Ecology in a Bottomland Hardwood Forest (United States)

    Richard N. Conner; Stanley D. Jones; Gretchen D. Jones


    We studied woodpecker foraging behavior, snag quality, and surrounding habitat in a bottomland hardwood forest in the Stephen F. Austin Experimental Forest from December 1984 through November 1986. The amount and location of woodpecker foraging excavations indicated that woodpeckers excavated mainly at the well-decayed tops and bases of snags. Woodpeckers preferred to...

  20. Control of decay in bolts and logs of northern hardwoods during storage (United States)

    Theodore C. Scheffer; T. W. Jones


    Many wood-using plants in the Northeast store large quantities of hardwood logs for rather long periods. Sometimes a large volume of the wood is spoiled by decay during the storage period. A number of people have asked: "How can we prevent this loss?"

  1. Nesting Ecology of Wood Thrush (Turdidae: Passeriformes) in Hardwood Forests of South Carolina (United States)

    Robert A. Sargent; John C. Kilgo; Brian R. Chapman; Karl V. Miller


    We studied nesting success of the Wood Thrush (Hylocichla mustelina) in bottomland and upland hardwood forests in South Carolina. Twenty-one of 26 nests (80.8%) were located in bottomland sites, and 76.2% of these nests were in narrow (

  2. Natural regeneration of northern hardwoods in the northern Great Lakes Region. (United States)

    Carl H. Tubbs


    Reviews silvical and silvicultural information about natural regeneration pertinent to forestry practices in Lake State northern hardwood types. Seed production; effects of light, moisture, temperature and competition on establishment and growth; and how damage affects mortality rates and form are covered. Clearcutting, selection, and shelterwood experiments are...

  3. Influences of Herbivory and Canopy Opening Size on Forest Regeneration in a Southern Bottomland Hardwood Forest (United States)

    Steven B. Castleberry; W. Mark Ford; Carl V. Miller; Winston P. Smith


    We examined the effects of white-tailed deer (Odocoileus virginianus) browsing and canopy opening size on relative abundance and diversity of woody and herbaceous regeneration in various sized forest openings in a southern, bottomland hardwood forest over three growing seasons (1995-1997). We created 36 canopy openings (gaps), ranging from 7 to 40m...

  4. Establishing even-age northern hardwood regeneration by the shelterwood method--a preliminary guide. (United States)

    Richard M. Godman; Carl H. Tubbs


    The shelterwood system of regeneration with northern hardwoods is a reliable method of obtaining even-age stands of both tolerant and moderately tolerant species. Details of applying the two-cut system are described along with the necessary modifications for encouraging moderately tolerant species.

  5. Growth and Survival of Hardwoods and Pine Interplanted with European Alder (United States)

    William T. Plass


    European black alder is recommended for planting on many surface mine spoils in the eastern United States. It grows rapidly on a range of spoil types and contributes to soil enrichment by fixing nitrogen and providing a leaf fall rich in nutrients. This study evaluated the effect of alder on the survival and growth of five hardwood and five pine species. After 10...

  6. Hardwood Face Veneer and Plywood Mill Closures in Michigan and Wisconsin Since 1950 (United States)

    Lewis T. Hendricks


    In recent years there has been a great deal of concern about the closure of numberous hardwood face veneer and plywood mills in Michigan and Wisconsin. As part of an overall study of that industry in the northern Lake States region, the basic reasons leading to the closure of these mills were investigated. In the past 15 years, there have been eight known mill...

  7. Revealing the Molecular Structural Transformation of Hardwood and Softwood in Dilute Acid Flowthrough Pretreatment

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Libing; Pu, Yunqiao; Cort, John R.; Ragauskas, Arthur J.; Yang, Bin


    To better understand the intrinsic recalcitrance of lignocellulosic biomass, the main hurdle to its efficient deconstruction, the effects of dilute acid flowthrough pretreatment on the dissolution chemistry of hemicellulose, cellulose, and lignin for both hardwood (e.g. poplar wood) and softwood (e.g. lodgepole pine wood) were investigated at temperatures of 200 °C to 270 °C and a flow rate of 25 mL/minute with 0.05% (w/w) H2SO4. Results suggested that the softwood cellulose was more readily to be degraded into monomeric sugars than that of hardwood under same pretreatment conditions. However, while the hardwood lignin was completely removed into hydrolysate, ~30% of the softwood lignin remained as solid residues under identical conditions, which was plausibly caused by vigorous C5-active recondensation reactions (C-C5). Unique molecular structural features that pronounced the specific recalcitrance of hardwood and softwood to dilute acid pretreatment were identified for the first time in this study, providing important insights to establish the effective biomass pretreatment.

  8. 78 FR 16250 - Hardwood and Decorative Plywood From the People's Republic of China: Amended Preliminary... (United States)


    ... DEPARTMENT OF COMMERCE International Trade Administration [C-570-987] Hardwood and Decorative..., International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (the Department..., Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and...

  9. The frequency and level of sweep in mixed hardwood saw logs in the eastern United States (United States)

    Peter Hamner; Marshall S. White; Philip A. Araman


    Hardwood sawmills traditionally saw logs in a manner that either orients sawlines parallel to the log central axis (straight sawing) or the log surface (allowing for taper). Sweep is characterized as uniform curvature along the entire length of a log. For logs with sweep, lumber yield losses from straight and taper sawing increase with increasing levels of sweep. Curve...

  10. Species diversity of polyporoid and corticioid fungi in northern hardwood forests with differing management histories (United States)

    Daniel L. Lindner; Harold H., Jr. Burdsall; Glen R. Stanosz


    Effects of forest management on fungal diversity were investigated by sampling fruit bodies of polyporoid and corticioid fungi in forest stands that have different management histories. Fruit bodies were sampled in 15 northern hardwood stands in northern Wisconsin and the upper peninsula of Michigan. Sampling was conducted in five old-growth stands, five uneven-age...

  11. A Comparison of Several Artificial Neural Network Classifiers for CT Images of Hardwood Logs (United States)

    Daniel L. Schmoldt; Jing He; A. Lynn Abbott


    Knowledge of internal log defects, obtained by scanning, is critical to efficiency improvements for future hardwood sawmills. Nevertheless, before computed tomography (CT) scanning can be applied in industrial operations, we need to automatically interpret scan information so that it can provide the saw operator with the information necessary to make proper sawing...

  12. Stand and individual tree growth response to treatments in young natural hardwoods (United States)

    Daniel J. Robison; Tracy San Filipo; Charlie Lawrence III; Jamie L. Schuler; Bryan J. Berenguer


    Young even-aged upland Piedmont mixed hardwood and pine stands were treated with a variety of fertilizer and release (competition control) treatments. The sites studied are on the NC State University Hill Demonstration Forest in central North Carolina, and are characterized by formerly highly eroded agricultural sites (Richter et al. 2000) now in their third rotation...

  13. Survival of Hardwood Regeneration During Prescribed Fires: The Importance of Root Development and Root Collar Location (United States)

    Patrick Brose; David Van Lear


    Fire ecology studies in eastern hardwood forests usually use plot-based inventory methods and focus on sprouting stems to detect changes in vegetative composition and structure. Rarely are individual stems studied and stems that fail to sprout are usually ignored. In this study, an individual stem mortality approach was employed. Four hundred fifty stems of eight...

  14. Assessing the feasibility and profitability of cut-to-length harvests in eastern hardwoods (United States)

    Chris B. LoDoux


    Cut-to-length (CTL) logging applications are becoming more popular in hardwood forests. CTL harvesting causes much less damage to the residual stand than conventional harvesting because logs and trees are not pulled through the stand and trees can be felled directionally.

  15. Modeling and simulating two cut-to-length harvesting systems in central Appalachian hardwoods (United States)

    Jingxin Wang; Chris B. LeDoux; Yaoxiang Li


    The production rates and costs of two cut-to-length harvesting systems was simulated using a modular ground-based simulation model and stand yield data from fully stocked, second growth even aged central Appalachian hardwood forests. The two harvesters simulated were a modified John Deere 988 tracked excavator with a model RP 1600 single grip sawhead and an excavator...

  16. Productivity and cost of manual felling and cable skidding in central Appalachian hardwood forests (United States)

    Jingxin Wang; Charlie Long; Joe McNeel; John Baumgras; John Baumgras


    A field production study was conducted for a manual harvesting system using a chainsaw and cable skidder in a central Appalachian hardwood forest site. A partial cut was performed on a 50-acre tract with an average slope of 25 percent. Felling time pre tree was most affected by diameter at breast height and the distance between harvested trees while skidding cycle time...

  17. Production economics of harvesting small-diameter hardwood stands in central Appalachia (United States)

    Yaoxiang Li; Jingxin Wang; Gary Miller; Joe McNeel


    Three harvesting systems of chainsaw/cable skidder, feller-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands 30 to 50 years old in central Appalachia. Stands were generated by using a 3D stand generator. Harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree release...

  18. Regeneration after cutting of old-growth northern hardwoods in New Hampshire (United States)

    William B. Leak; Robert W., Jr. Wilson


    Past experience with cuttings in old-growth northern hardwoods has demonstrated that the primary regeneration problem is to obtain a large proportion of desirable species of good quality. Regardless of method or intensity of cutting, the total amount of reproduction usually is adequate. Second-growth stands are a different story: this report pertains only to old-growth...

  19. Long-term effects of single prescribed fires on hardwood regeneration in oak shelterwood stands (United States)

    Patrick H. Brose


    One of the arguments against using prescribed fire to regenerate oak (Quercus spp.) forests is that the improvement in species composition of the hardwood regeneration pool is temporary and multiple burns are necessary to achieve and maintain oak dominance. To explore this concern, I re-inventoried a prescribed fire study conducted in the mid-1990s...

  20. Hardwoods for timber bridges : a national program emphasis by the USDA Forest Service (United States)

    James P. Wacker; Ed Cesa


    This paper describes the joint efforts of the Forest Service and the FHWA to administer national programs including research, demonstration bridges, and technology transfer components. Summary information on a number of Forest Service-WIT demonstration bridges constructed with hardwoods is also provided.

  1. Radial growth of hardwoods following the 1998 ice storm in New Hampshire and Maine (United States)

    Kevin T. Smith; Walter C. Shortle


    Ice storms and resulting injury to tree crowns occur frequently in North America. Reaction of land managers to injury caused by the regional ice storm of January 1998 had the potential to accelerate the harvesting of northern hardwoods due to concern about the future loss of wood production by injured trees. To assess the effect of this storm on radial stem growth,...

  2. Resistance is not futile: The response of hardwoods to fire-caused wounding (United States)

    Elaine Kennedy Sutherland; Kevin Smith


    Fires wound trees; but not all of them, and not always. Specific fire behavior and differences among tree species and individual trees produce variable patterns of wounding and wound response. Our work focuses on the relationships between fire behavior and tree biology to better understand how hardwood trees resist injury to the lower stem and either survive or succumb...

  3. Characterizing the adoption of low-grade hardwood lumber by the secondary wood processing industry (United States)

    Robert L. Smith; Wibke Pohle; Philip Araman; Dan Cumbo


    This study investigated the adoption of low-grade lumber in the secondary hardwood industry. Factors influencing decisions regarding the utilization of low-grade lumber were identified and value-added opportunities to increase the use of low-grade lumber among manufacturers currently using higher grades were evaluated. Data were collected via a nationwide mail survey...

  4. Tangential scanning of hardwood logs: developing an industrial computer tomography scanner (United States)

    Nand K. Gupta; Daniel L. Schmoldt; Bruce Isaacson


    It is generally believed that noninvasive scanning of hardwood logs such as computer tomography (CT) scanning prior to initial breakdown will greatly improve the processing of logs into lumber. This belief, however, has not translated into rapid development and widespread installation of industrial CT scanners for log processing. The roadblock has been more operational...

  5. Predicting the regeneration of Appalachian hardwoods: adapting the REGEN model for the Appalachian Plateau (United States)

    Lance A. Vickers; Thomas R. Fox; David L. Loftis; David A. Boucugnani


    The difficulty of achieving reliable oak (Quercus spp.) regeneration is well documented. Application of silvicultural techniques to facilitate oak regeneration largely depends on current regeneration potential. A computer model to assess regeneration potential based on existing advanced reproduction in Appalachian hardwoods was developed by David...

  6. Fifteen-Year Growth of Six Planted Hardwood Species on Sharkey Clay Soil (United States)

    Roger M. Krinard; Harvey E. Kennedy


    Six hardwood species planted on Sharkey clay soil that had been disked the first 5 years for weed control were significantly taller at age 5 when compared to species grown on mowed sites. By age 15, there were no differences in heights within species except for sweet pecan. Average heights by species at age 15 were: cottonwood (Populus deltoides...

  7. The Number of Hardwood Sawmills Continues to Decrease - Is that Bad? (United States)

    William G. Luppold; William G. Luppold


    The following Guest Editorial, "The Number of Hardwood Sawmills Continues to Decrease - Is that Bad?" is presented by William G. Luppold, Ph.D., of the USDA Forest Service Northeastern Research Station - Forestry Sciences Laboratory. In this article, Dr. Luppold examines many of the key issues surrounding the size and loss of sawmills, which has influenced...

  8. The sine method as a more accurate height predictor for hardwoods (United States)

    Don C. Bragg


    Most hypsometers apply a mathematical technique that utilizes the tangent of angles and a horizontal distance to deliver the exact height of a tree under idealized circumstances. Unfortunately, these conditions are rarely met for hardwoods in the field. A “new” predictor based on sine and slope distance and discussed here does not require the same assumptions for...

  9. Impact of product mix and markets on the economic feasibility of hardwood thinning (United States)

    John E. Baumgras; Chris B. LeDoux


    Results demonstrate how the economic feasibility of commercial hardwood thinning is impacted by tree diameter, product mix, and primary product markets. These results indicate that multiproduct harvesting can increase revenues by $0.01/ft³ to $0.32/ft³; and that small shifts in price levels or haul distance can postpone commercial thinning...

  10. Analysis of harvesting opportunities for thinning eastern hardwoods on steep terrain (United States)

    Chris B. LeDoux; John E. Baumgras


    Harvesting cost and revenue models were used to evaluate yarding costs by yarder type and to compare stump-to-mill harvesting costs to revenues available from multiproduct thinnings in eastern hardwoods. This analysis includes six types of cable yarders and thinnings in stands where the average diameter at breast height of trees harvested ranged from 7 to 12 inches. To...

  11. Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image (United States)

    Philip A. Araman; Janice K. Wiedenbeck


    Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

  12. Consumer and manufacturer perceptions of hardwood panels made from character-marked lumber (United States)

    D. Nicholls; M. Bumgardner; V. Barber


    Hardwood panels made from edge-glued material are a versatile product that could be within the reach of many smaller wood products firms. However, products would need to be accepted throughout the supply chain for this opportunity to be achieved. This study evaluated preferences of consumers and manufacturers towards edge-glued panels from Alaskan red alder and paper...

  13. Silviculture-ecology of forest-zone hardwoods in the Sierra Nevada (United States)

    Philip M. McDonald; John C. Tappeiner


    Although the principal hardwood species in the forest zone of the Sierra Nevada (California black oak, tanoak, Pacific madrone, and canyon live oak) are key components of many ecosystems, they have received comparatively little study. Currently they are underutilized and unmanaged. This paper brings together what is known on the silviculture-ecology of these species...

  14. Leaf fall, humus depth, and soil frost in a northern hardwood forest (United States)

    George Hart; Raymond E. Leonard; Robert S. Pierce


    In the mound-and-depression microtopography of the northern hardwood forest, leaves are blown off the mounds and collect in the depressions. This influence of microtopography on leaf accumulation is responsible for much of the variation in humus depth; and this, in turn, affects the formation and depth of soil frost.

  15. SITEQUAL--A User's Guide: Computerized Site Evaluation for 14 Southern Hardwood Species (United States)

    Constance A. Harrington; Bettina M. Casson


    An interactive computer program, SITEQUAL, has been developed from the widely-used Baker and Broadfoot field guides, which evaluate site quality for 14 southern hardwood tree species. The SITEQUAL program calculates site index for all species simultaneously and provides a breakdown of site index into the component contributions by each of the four major soil factors...

  16. Rationale and Application of Tangential Scanning to Industrial Inspection of Hardwood Logs (United States)

    Nand K. Gupta; Daniel L. Schmoldt; Bruce Isaacson


    Industrial computed tomography (CT) inspection of hardwood logs has some unique requirements not found in other CT applications. Sawmill operations demand that large volumes of wood be scanned quickly at high spatial resolution for extended duty cycles. Current CT scanning geometries and commercial systems have both technical and economic [imitations. Tangential...

  17. Influence of Lumber Volume Maximization on Value in Sawing Hardwood Sawlogs (United States)

    Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman


    Research based on applying volume-maximizing sawing solutions to idealized hardwood log forms has shown that average lumber yield can be increased by 6 percent. It is possible, however, that a lumber volume-maximizing solution may result in a decrease in lumber grade and a net reduction in total value of sawn lumber. The objective of this study was to determine the...

  18. The Value Versus Volume Yield Problem for Live-Sawn Hardwood Sawlogs (United States)

    Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman


    The potential conflict between value and volume maximization in sawing hardwood sawlogs by the live sawing method was analyzed. Twenty-four digitally described red oak sawlogs were sawn at the log orientation of highest value yield. Five opening face sawlines were iteratively placed in the sawlog a 1/4-inch intervals and lumber grades, volumes, and values from...

  19. Hardwood supply chain and the role of log brokers in 2012 (United States)

    Iris Montague; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann


    The recent economic crisis has greatly affected how companies conduct business. To be competitive, companies had to make changes to their product lines, distribution channels, marketing, and overall business strategies. This study was conducted to describe and analyze the log supply component of the hardwood forest products distribution chain and to investigate changes...

  20. The international hardwood lumber market and potential impacts on your bottom line (United States)

    Bill Luppold; Matthew. Bumgardner


    Even if you don't sell logs or lumber to foreign customers, the international hardwood market can impact your business in significant ways, and smart business leaders are taking notice so that they are ready for shifting market impacts. Many people believe that lumber exporting is only an opportunity for larger sawmills. However, even if you have a portable mill...

  1. Use of Hardwood Tree Species by Birds Nesting in Ponderosa Pine Forests (United States)

    Kathryn L. Purcell; Douglas A. Drynan


    We examined the use of hardwood tree species for nesting by bird species breeding in ponderosa pine (Pinus ponderosa) forests in the Sierra National Forest, California. From 1995 through 2002, we located 668 nests of 36 bird species nesting in trees and snags on four 60-ha study sites. Two-thirds of all species nesting in trees or snags used...

  2. Effects of winter flooding on mass and gross energy of bottomland hardwood acorns (United States)

    Alan G. Leach; Jacob N. Straub; Richard M. Kaminski; Andrew W. Ezell; Tracy S. Hawkins; Theodor D. Leininger


    Decomposition of red oak acorns (Quercus spp.; Section Erythrobalanus) could decrease forage biomass and gross energy (GE) available to wintering ducks from acorns. We estimated changes in mass and GE for 3 species of red oak acorns in flooded and non-flooded bottomland hardwood forests in Mississippi during winter 2009–2010. Mass...

  3. Using low-grade hardwoods for CLT production: a yield analysis (United States)

    R. Edward Thomas; Urs. Buehlmann


    Low-grade hardwood logs are the by-product of logging operations and, more frequently today, urban tree removals. The market prices for these logs is low, as is the value recovered from their logs when producing traditional forest products such as pallet parts, railroad ties, landscaping mulch, or chips for pulp. However, the emergence of cross-laminated timber (CLT)...

  4. Silviculture-ecology of three native California hardwoods on high sites in north central California (United States)

    Philip M. McDonald


    Pacific madrone, tanoak, and California black oak are the most economically promising native California hardwoods. Volume and value data indicate upward trends in growing stock levels and prices received for their products. These trends are likely to continue. They suggest research is particularly needed for: (1) seed fall and regeneration, (2) sprout growth and...

  5. California’s Hardwood Resource: Seeds, Seedlings, and Sprouts of Three Important Forest-Zone Species (United States)

    Philip M. McDonald; John C. Tappeiner


    Although California black oak, tanoak, and Pacific madrone are the principal hardwood species in the forest zone of California and Oregon and are key components of many plant communities, their seed production, regeneration, and early growth requirements have received little study. Information is presented on seed production, storage, and germination, and on the...

  6. Impact of construction and remodeling markets on the U.S. secondary hardwood products industry (United States)

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen. Koenig


    The housing correction that started in 2007 continues to run its course. Excessive inventory levels, limited credit availability, and record foreclosure rates continue to have an impact on U.S. housing markets. With inventories high and demand for new construction low, the U.S. hardwood industry's largest markets for appearance-grade products remain under pressure...

  7. Survey studies how to reach primary hardwood producers with new information (United States)

    Philip Araman; Robert Smith; Matthew Winn


    It is important for the timber industry to obtain new knowledge in order to stay competitive, increase productivity, or to produce new products from a sometime changing resource. We sought to understand how new knowledge— innovative techniques, improved technology, and marketing information—reach our primary forest industries in the United States. We surveyed hardwood...

  8. Soil respiration response to prescribed burning and thinning in mixed-conifer and hardwood forests (United States)

    Amy Concilio; Siyan Ma; Qinglin Li; James LeMoine; Jiquan Chen; Malcolm North; Daryl Moorhead; Randy Jensen


    The effects of management on soil carbon efflux in different ecosystems are still largely unknown yet crucial to both our understanding and management of global carbon flux. To compare the effects of common forest management practices on soil carbon cycling, we measured soil respiration rate (SRR) in a mixed-conifer and hardwood forest that had undergone various...

  9. Life-cycle inventory of manufacturing hardwood lumber in Southeastern US (United States)

    Richard D. Bergman; Scott A. Bowe


    Environmental impacts associated with the building industry have become of increasing importance. Materials and energy consumed during manufacture of building materials such as lumber affect a building’s environmental performance. This study determined environmental impacts of manufacturing hardwood lumber in the southeastern US using the life-cycle inventory method....

  10. Environmental impact of producing hardwood lumber using life-cycle inventory (United States)

    Richard D. Bergman; S.A. Bowe


    Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Showing wood products as green building materials is vital for the long-term productivity of the wood building industry. This study examined hardwood lumber manufacturing using Life-Cycle Inventory...

  11. Litterfall in the hardwood forest of a minor alluvial-floodplain (United States)

    Calvin E. Meier; John A. Stanturf; Emile S. Gardiner


    within mature deciduous forests, annual development of foliar biomass is a major component of aboveground net primary production and nutrient demand. As litterfall, this same foliage becomes a dominant annual transfer of biomass and nutrients to the detritus pathway. We report litterfall transfers of a mature bottomland hardwood forest in a minor alluvial-floodplain...

  12. Winter climate change affects growing-season soil microbial biomass and activity in northern hardwood forests (United States)

    Jorge Durán; Jennifer L. Morse; Peter M. Groffman; John L. Campbell; Lynn M. Christenson; Charles T. Driscoll; Timothy J. Fahey; Melany C. Fisk; Myron J. Mitchell; Pamela H. Templer


    Understanding the responses of terrestrial ecosystems to global change remains a major challenge of ecological research. We exploited a natural elevation gradient in a northern hardwood forest to determine how reductions in snow accumulation, expected with climate change, directly affect dynamics of soil winter frost, and indirectly soil microbial biomass and activity...

  13. Bud removal affects shoot, root, and callus development of hardwood Populus cuttings (United States)

    A.H. Wiese; J.A. Zalesny; D.M. Donner; Ronald S., Jr. Zalesny


    The inadvertent removal and/or damage of buds during processing and planting of hardwood poplar (Populus spp.) cuttings are a concern because of their potential impact on shoot and root development during establishment. The objective of the current study was to test for differences in shoot dry mass, root dry mass, number of roots, length of the...

  14. Bats of the hardwood ecosystem experiment before timber harvest: assessment and prognosis (United States)

    Jeremy J. Sheets; John O. Whitaker; Virgil Jr. Brack; Dale W. Sparks


    Before experimental harvest of the Yellowwood (YW) and Morgan-Monroe (MM) State Forests (Indiana) as part of the Hardwood Ecosystem Experiment, bats were sampled using mist nets at four locations in MM and five locations in YW during each summer 2006 through 2008. Netting locations were adjacent to forest stands scheduled for experimental manipulations following...

  15. Influence of hardwood midstory and pine species on pine bole arthropods (United States)

    Christopher S. Collins; Richard N. Conner; Daniel Saenz


    Arthropod density on the boles of loblolly pines (Pinus taeda) was compared between a stand with and stand without hardwood midstory and between a stand of loblolly and shortleaf pines (P. echinata) in the Stephen E Austin Experimental Forest, Nacogdoches Co., Texas, USA from September 1993 through July 1994. Arthropod density was...

  16. permeability of twenty-two small diameter hardwoods growing on southern pine sites (United States)

    E.T. Choong; F.O. Tesora


    Gas permeability of hardwoods growing on southern pine sites is significantly affected by moisture content in the longitudinal direction. The ratio of permeability in the transverse to longitudinal directions is from 12,000:1 for post oak to over 1,000,000:1 for other oaks, but it is not affected by moisture. Although variation in longitudinal permeability varies...

  17. Effects of intermediate-severity disturbance on composition and structure in mixed Pinus-hardwood stands (United States)

    Benjamin Trammell; Justin Hart; Callie Schweitzer; Daniel C. Dey; Michael Steinberg


    Increasingly, forest managers intend to create or maintain mixed Pinus-hardwood stands. This stand assemblage may be driven by a variety of objectives but is often motivated by the desire to enhance native forest diversity and promote resilience to perturbations. Documenting the effects of natural disturbances on species composition and stand...

  18. A Stocking Guide for Allegheny Hardwoods and Its Use in Controlling Intermediate Cuttings (United States)

    Benjamin A. Roach


    A stocking guide for stands of Allegheny hardwoods (sugar maple or sugar maple-beech with varying admixtures of black cherry, red maple, white ash, sweet birch, and other species) on the Allegheny Plateau in northwestern Pennsylvania. Included are procedures for evaluating stocking and stand conditions, thinning even-aged stands, determining minimum residual stocking,...

  19. Development of second-growth northern hardwoods on Bartlett Experimental Forest - a 25-year record (United States)

    William B. Leak


    Second-growth timber occupies more than one-third of the commercial northern hardwood forest land in New England. The origin of these stands - clearcutting, or land abandonment with or without fire - determined their present characteristics; they are essentially even-aged, with a high proportion of intolerant and intermediate species and many stems of sprout origin (...

  20. Effects of edge contrast on redback salamander distribution in even-aged northern hardwoods (United States)

    Richard M. DeGraaf; Mariko. Yamasaki


    Terrestrial salamanders are sensitive to forest disturbance associated with even-aged management. We studied the distribution of redback salamanders (Plethodon cinereus) for 4 yr at edges between even-aged northern hardwood stands along three replicate transects in each of three edge contrast types: regeneration/mature, sapling/mature, and...

  1. Assessing the opportunity cost of implementing streamside management zone guidelines in eastern hardwood forests (United States)

    Chris B. LeDoux


    Forest landowners, managers, loggers, land-use planners, and other decision/policy makers need to understand the opportunity cost associated with different levels of allowable management and required/voluntary protection in streamside management zones (SMZs). Four different logging technologies, two mature hardwood stands, three levels of streamside zone protection,...

  2. The Hardwood Ecosystem Experiment: a framework for studying responses to forest management (United States)

    Robert K. Swihart; Michael R. Saunders; Rebecca A. Kalb; G. Scott Haulton; Charles H., eds. Michler


    Conditions in forested ecosystems of southern Indiana are described before initiation of silvicultural treatments for the Hardwood Ecosystem Experiment (HEE). The HEE is a 100-year study begun in 2006 in Morgan-Monroe and Yellowwood State Forests to improve the sustainability of forest resources and quality of life of Indiana residents by understanding ecosystem and...

  3. Changes in early-successional hardwood forest area in four bird conservation regions across four decades (United States)

    Sonja N. Oswalt; Kathleen E. Franzreb; David A. Buehler


    Early successional hardwood forests constitute important breeding habitat for many migratory songbirds. Declines in populations of these species suggest changes in habitat availability either on the species’ wintering grounds or on their early successional breeding grounds. We used Forest Inventory and Analysis data from 11 states across four decades to examine changes...

  4. Tree diameter a poor indicator of age in West Virginia hardwoods (United States)

    Carter B. Gibbs


    Foresters generally recognize that diameter growth, height growth, sprouting vigor, and seed production are partially related to age; so age often has an important bearing upon silvicultural decisions. But unless past stand histories are fully known, the ages of hardwood trees can be determined only by increment borings, which not only require excessive time but also...

  5. Maximum size-density relationships for mixed-hardwood forest stands in New England (United States)

    Dale S. Solomon; Lianjun Zhang


    Maximum size-density relationships were investigated for two mixed-hardwood ecological types (sugar maple-ash and beech-red maple) in New England. Plots meeting type criteria and undergoing self-thinning were selected for each habitat. Using reduced major axis regression, no differences were found between the two ecological types. Pure species plots (the species basal...

  6. Managing Appalachian hardwood stands using four regeneration practices--34 year results (United States)

    H. Clay Smith; Gary W. Miller


    Adjacent Appalachian hardwood stands in West Virginia established on excellent growing sites were managed for a 34-year period using four regeneration practices. These practices included a commercial clearcut, 15.5-in diameter-limit, and two single-tree selection practices. An uncut area was maintained as a control. Stand development, growth response, and some stumpage...

  7. A Review of Techniques for Minimizing Beaver and White-Tailed Deer Damage in Southern Hardwoods (United States)

    Edward P. Hill; Douglas N. Lasher; R. Blake. Roper


    Methods of reducing beaver and deer damage to hardwood forest resources are reviewed. Beaver controls considered were poisons, chemosterilants, predators, and trapping. Population reduction through trapping with 330 conibear traps for two weeks during two successive years effectively eliminates beaver from small watersheds and shows greater promise for control than...

  8. Automated hardwood lumber grading utilizing a multiple sensor machine vision technology (United States)

    D. Earl Kline; Chris Surak; Philip A. Araman


    Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical and Computer Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading...

  9. Carbon sequestration resulting from bottomland hardwood afforestation in the Lower Mississippi Alluvial Valley (United States)

    Bertrand F. Nero; Richard P. Maiers; Janet C. Dewey; Andrew J. Londo


    Increasing abandonment of marginal agricultural lands in the Lower Mississippi Alluvial Valley (LMAV) and rising global atmospheric carbon dioxide (CO2) levels create a need for better options of achieving rapid afforestation and enhancing both below and aboveground carbon sequestration. This study examines the responses of six mixtures of bottomland hardwood species...

  10. Snag recruitment and mortality in a bottomland hardwood forest following partial harvesting: second-year results (United States)

    Brian Roy Lockhart; Philip A. Tappe; David G. Peitz; Christopher A. Watt


    Snags are defined simply as standing dead trees. They function as an important component of wildlife habitat. Unfortunately, little information has been gathered regarding snags in bottomland forest ecosystems. We initiated a study to determine the effects of harvesting on the flora and fauna of a bottomland hardwood ecosystem adjacent the Mississippi River in...

  11. The Integrated Hardwood Range Management Program: Education and Research as a Conservation Strategy (United States)

    Richard B. Standiford; James W. Bartolome


    California’s hardwood rangelands cover 10 million acres, providing wildlife habitat, esthetics, recreation, and watershed protection. About 85 percent of the area is privately owned, and private ranchers supply most of these open space values. The important public values from these privately-owned wildlands has created pressure for the state to regulate oak harvest and...

  12. Effect of resin variables on the creep behavior of high density hardwood composite panels (United States)

    R.C. Tang; Jianhua Pu; C.Y Hse


    The flexural creep behavior of oriented strandboards (OSB) fabricated with mixed high, density hardwood flakes was investigated. Three types of adhesives, liquid phenolic-formaldehyde (LPF), melamine modified urea-formaldehyde (MUF), and LPF (face)/MUF (core) were chosen in this investigation. The resin contents (RC) used were 3.5 percent and 5.0 percent. The flakes...

  13. Research efforts on fuels, fuel models, and fire behavior in eastern hardwood forests (United States)

    Thomas A. Waldrop; Lucy Brudnak; Ross J. Phillips; Patrick H. Brose


    Although fire was historically important to most eastern hardwood systems, its reintroduction by prescribed burning programs has been slow. As a result, less information is available on these systems to fire managers. Recent research and nationwide programs are beginning to produce usable products to predict fuel accumulation and fire behavior. We introduce some of...

  14. Consumer preferences for kitchen cabinets made from red alder: a comparison to other hardwoods. (United States)

    David L. Nicholls; Geoffrey H. Donovan; Joseph. Roos


    In Alaska, red alder (Alnus rubra Bong.) is an abundant but commercially underutilized species despite having properties suitable for higher value products, including furniture and cabinetry. However, it laces the name recognition of mote traditional hardwoods. Our research measured the effect of this lack of familiarity on consumer preferences...

  15. Logging damage using an individual tree selection practice in Appalachian hardwood stands (United States)

    Neil I. Lamson; H. Clay Smith; Gary W. Miller


    Four West Virginia hardwood stands, managed using individual-tree selection for the past 30 years, were examined after the third and, in one instance, the fourth periodic harvest to determine the severity of logging damage. On existing skid roads, trees were removed with a rubber-tired skidder or a crawler tractor with a rubber-tired arch. Logging damage reduced...

  16. Dimension yields from short logs of low-quality hardwood trees. (United States)

    Howard N. Rosen; Harold A. Stewart; David J. Polak


    Charts are presented for determining yields of 4/4 dimension cuttings from short hardwood logs of aspen, soft maple, black cherry, yellow-poplar, and black walnut for several cutting grades and bolt sizes. Cost comparisons of short log and standard grade mixes show sizes. Cost comparisons of short log and standard grade mixes show the estimated least expensive...


    Past clearing and harvesting of the deciduous hardwood forests of eastern USA released large amount of carbon dioxide into the atmosphere, but through recovery and regrowth these forests are now accumulating atmospheric carbon (C). This study examined quantities and distribution ...

  18. Logging in hardwood stands established on farm land

    International Nuclear Information System (INIS)

    Bjoerheden, R.


    Performance and costs for different harvesting systems in broad leaf stands established on former tillage is presented. The calculations, combined with a forecast of the market development, shows that it is risky to aim production exclusively at bulk products as fibre or fibre/energy. The harvest of fibre or energy wood can, however, be used as a means to increase profitability of a silvicultural programme aimed at production of high quality hardwood lumber. Management and logging in these stands will be carried out with small scale technology, often by the private forest owner. Todays large scale systems are not competitive in these stands. The cost calculations show that we lack economically sound systems for harvesting stands in the interval up to 5 cm DBH. The lowest logging cost for these stands was calculated for motor manual felling and chipping with a chipper/dumper mounted on a farm tractor. This alternative is competitive also in the interval 5-10 cm DBH but there is a number of other feasible systems, e.g. off-road chippers processing motor manually felled and piled trees. Tree section systems with extraction by forwarder or a farm tractor with grapple loader and a bogic trailer operates at low costs to roadside but costs for processing and, maybe, a more expensive secondary transportation must then be added. For thinnings in the interval 10-25 cm DBH tree chipping is the most cost efficient if only energy assortments is to be harvested. However, at the current price relations between energy wood and pulpwood tree section systems are preferable also in stands over 10 cm since it allows a combined harvest of fibre and energy. For the same reason, the seemingly most interesting system in later thinnings is a system with differentiated processing. The term denotes a system where pulpwood is cut motor manually down to 12.5 cm and extracted by forwarder or farm tractor. The remaining tops and branches are processed by an off-road chipper. (36 refs., 11 figs.)

  19. Shaping-lathe headrig will convert small hardwoods into pallet cants plus flakes for structural exterior flakeboard (United States)

    Peter Koch


    Virtually all nations have an under-utilized resource of small-diameter, low-grade hardwoods of mixed species in a range of densities. The shaping-lathe headrig, now in the final stages of commercialization, is a key to utilizing these hardwoods for pallets, industrial lumber, and-with further development-railroad crossties. Lathe residues in the form of flakes can be...

  20. Changes in species, grade, and structure over 48 years in a managed New England northern hardwood stand (United States)

    William B. Leak; Paul E. Sendak


    Three individual-tree selection harvests over a 48 yr period in a northern hardwood stand in New Hampshire resulted in an increase in the percentage of volume in trees with grade 1 and 2 butt logs from 21% (1952) to 30% (2000) in beech and 40% (1952) to 65% (2000) in sugar maple and other hardwoods. By 2000, 90% of the volume was in tolerant species.

  1. Challenges and Opportunities for North American Hardwood Manufacturers to Adopt Customization Strategies in an Era of Increased Competition

    Directory of Open Access Journals (Sweden)

    David L. Nicholls


    Full Text Available Much of the North American wood products industry was severely impacted by the recession of 2008–2009. In addition, many sectors within this industry face intense global competition. Against this backdrop, we examine economic opportunities for hardwood manufacturers to achieve greater competitive advantage via product customization, through a literature review and synthesis. We also discuss several related themes including agility, lean manufacturing, and clustering. We found that, in globally competitive environments, hardwood producers must be agile to adapt to economic conditions and dynamic customer demand. We discuss how some sectors of the hardwood industry have effectively exhibited customized production, and subsequently fared relatively well in the current economy. We conclude the synthesis by evaluating the importance of supply chains to achieving customization for hardwood producers. In the future, supply chains will need to be configured to rapidly respond to changing consumer demands, and pressure to provide more services will likely extend further back up the supply chain to hardwood sawmills. It is expected that sustainability practices, including green supply chain management, will impact operational and economic performance of hardwood firms as well.


    Directory of Open Access Journals (Sweden)

    Omar Espinoza


    Full Text Available The U.S. hardwood sawmilling industry has experienced significant changes over the past decade. A slowing housing industry, competition from imported products, higher transportation costs, and high stumpage prices have changed the business of manufacturing and marketing hardwood lumber. Also, hardwood lumber buyers are changing their business practices by shortening lead times, requiring a more customized product, and buying smaller lumber quantities to cut costs and increase operational flexibility. A survey of hardwood lumber manufacturers was conducted in the fall of 2009 to assess changes and adaptations within the industry. Among respondents, average hardwood lumber sales decreased by 13.2 percent during the study's focus period from 2004 to 2008. Respondents also identified a change in customer demand with smaller, more frequent orders becoming more common. Moreover, the species mix shifted, with red oak losing considerable market share. Intermediaries, such as hardwood lumber distributors, were able to capture more of the industry's business. Respondents identified the slowing housing market and high energy costs as major factors affecting their businesses. While the survey's responses reflected the extremely challenging economic conditions, industry participants are aggressively adapting their businesses and pursuing new opportunities with the understanding that markets will eventually recover.

  3. Novel extractants with high selectivity for valuable metals in seawater. Calixarene derivatives

    International Nuclear Information System (INIS)

    Kakoi, Takahiko; Goto, Masahiro


    Seawater contains various valuable metals such as uranium and lithium. Therefore, attempts are being made to develop highly selective extractants which recognize target metal ions in reclaimed seawater. In this review, we have focused our study on the application of novel cyclic compound calixarene based extractants. A novel host compound calixarene, which is a cyclic compound connecting some phenol rings, is capable of forming several different extractant ring sizes and introducing various kinds of functional groups towards targeting of metal ions in seawater. Therefore, calixarene derivatives are capable of extracting valuable metals such as uranium, alkaline metals, heavy metals, rare earth metals and noble metals selectively by varying structural ring size and functional groups. The novel host compound calixarene has given promising results which line it up as a potential extractant for the separation of valuable metal ions in seawater. (author)

  4. Effect of Acid Dissolution Conditions on Recovery of Valuable Metals from Used Plasma Display Panel Scrap

    Directory of Open Access Journals (Sweden)

    Kim Chan-Mi


    Full Text Available The objective of this particular study was to recover valuable metals from waste plasma display panels using high energy ball milling with subsequent acid dissolution. Dissolution of milled (PDP powder was studied in HCl, HNO3, and H2SO4 acidic solutions. The effects of dissolution acid, temperature, time, and PDP scrap powder to acid ratio on the leaching process were investigated and the most favorable conditions were found: (1 valuable metals (In, Ag, Mg were recovered from PDP powder in a mixture of concentrated hydrochloric acid (HCl:H2O = 50:50; (2 the optimal dissolution temperature and time for the valuable metals were found to be 60°C and 30 min, respectively; (3 the ideal PDP scrap powder to acid solution ratio was found to be 1:10. The proposed method was applied to the recovery of magnesium, silver, and indium with satisfactory results.

  5. Permanent foresty plots: a potentially valuable teaching resource in undergraduate biology porgrams for the Caribbean (United States)

    H. Valles; C.M.S. Carrington


    There has been a recent proposal to change the way that biology is taught and learned in undergraduate biology programs in the USA so that students develop a better understanding of science and the natural world. Here, we use this new, recommended teaching– learning framework to assert that permanent forestry plots could be a valuable tool to help develop biology...

  6. Using Psychodynamic Interaction as a Valuable Source of Information in Social Research

    DEFF Research Database (Denmark)

    Schmidt, Camilla


    This article will address the issue of using understandings of psychodynamic interrelations as a means to grasp how social and cultural dynamics are processed individually and collectively in narratives. I apply the two theoretically distinct concepts of inter- and intrasubjectivity to gain insight...... are valuable sources of information in understanding the process of becoming a social educator....

  7. Recovery of valuable nitrogen compounds from agricultural liquid wastes: potential possibilities, bottlenecks and future technological challenges.

    NARCIS (Netherlands)

    Rulkens, W.H.; Klapwijk, A.; Willers, H.C.


    Agricultural liquid livestock wastes are an important potential source of valuable nitrogen-containing compounds such as ammonia and proteins. Large volumetric quantities of these wastes are produced in areas with a high livestock production density. Much technological research has been carried out

  8. A field guide to valuable underwater aquatic plants of the Great Lakes (United States)

    Schloesser, Donald W.


    Underwater plants are a valuable part of the Great Lakes ecosystem, providing food and shelter for aquatic animals. Aquatic plants also help stabilize sediments, thereby reducing shoreline erosion. Annual fall die-offs of underwater plants provide food and shelter for overwintering small aquatic animals such as insects, snails, and freshwater shrimp.

  9. Comparison the biodiversity of hardwood floodplain forests and black locust forests

    International Nuclear Information System (INIS)

    Bazalova, D.


    The introduction of non-native species starts in the context of global changes in the world. These nonnative species, that have come to our country, whether intentionally or unintentionally, are responsible for the loss of biodiversity, changes in trophic levels and in nutrient cycle, hydrology, hybridizations, and at last could have an impact on the economy. The species black locust (Robinia pseudoaccacia) was introduced to Europe in 1601, first for horticultural purposes, and later broke into forestry. However, due to its ability to effectively spread the vegetative and generative root sprouts seeds and without the presence of natural pest may be occurrence of black locust in European forests highly questionable. Primarily we tried to identify differences in species composition and biodiversity among indigenous hardwood floodplain forest and non-native black locust forest based on numerical methods. In the results we were able to demonstrate more biodiversity in hardwood floodplain forests. (authors)

  10. Positive and negative aspects of soda/anthraquinone pulping of hardwoods. (United States)

    Francis, R C; Bolton, T S; Abdoulmoumine, N; Lavrykova, N; Bose, S K


    The positive aspects of the non-sulfur soda/anthraquinone (SAQ) process are mostly tied to improved energy efficiency while lower pulp brightness after bleaching is its most significant drawback. A credible method that quantifies bleachability as well as an approach that solves the problem for SAQ pulps from hardwoods will be described. A straight line correlation (R2=0.904) was obtained between O2 kappa number and final light absorption coefficient (LAC) value after standardized OD0EpD1 bleaching of nine hardwood kraft pulps from three laboratories and one pulp mill. The bleachability of pulps from four different soda processes catalyzed by anthraquinone (AQ) and 2-methylanthraquinone (MAQ) was compared to that of conventional kraft pulps by comparing O2 kappa number decrease and final LAC values. It was observed that a mild hot water pre-hydrolysis improved the bleachability of SAQ pulps to a level equal to that of kraft.

  11. Tree species composition and structure in an old bottomland hardwood forest in south-central Arkansas (United States)

    Brian Roy Lockhart; James M. Guldin; Thomas Foti


    Tree species composition and structure was determined for an old bottomland hardwood forest located in the Moro Creek Bottoms Natural Area in south-central Arkansas. Diversity for this forest was high with species richness ranging from 33 for the overstory and sapling strata to 26 for the seedling stratum and Shannon-Weiner values of 2.54 to 1.02 for the overstory and...

  12. Strip thinning young hardwood forests: multi-functional management for wood, wildlife, and bioenergy (United States)

    Jamie Schuler; Ashlee Martin


    Upland hardwood forests dominate the Appalachian landscape. However, early successional forests are limited. In WV and PA, for example, only 8 percent of the timberland is classified as seedling and sapling-sized. Typically no management occurs in these forests due to the high cost of treatment and the lack of marketable products. If bioenergy markets come to fruition...

  13. Site quality in Appalachian hardwoods: the biological and economic response under selection silviculture (United States)

    Orris D. McCauley; George R., Jr. Trimble


    The relative or percentage value response after 12 years of selective cutting practices on low- and high-quality sites in Appalachian hardwoods amounted to a 119-percent increase on the low-quality site and 145 percent on the high-quality site. The absolute value or actual dollar response, on the other hand, showed that the low-quality site increased in value only $76/...

  14. Modeling the relationships among internal defect features and external Appalachian hardwood log defect indicators (United States)

    R. Edward. Thomas


    As a hardwood tree grows and develops, surface defects such as branch stubs and wounds are overgrown. Evidence of these defects remain on the log surface for decades and in many instances for the life of the tree. As the tree grows the defect is encapsulated or grown over by new wood. During this process the appearance of the defect in the tree's bark changes. The...

  15. Computer Vision System For Locating And Identifying Defects In Hardwood Lumber (United States)

    Conners, Richard W.; Ng, Chong T.; Cho, Tai-Hoon; McMillin, Charles W.


    This paper describes research aimed at developing an automatic cutup system for use in the rough mills of the hardwood furniture and fixture industry. In particular, this paper describes attempts to create the vision system that will power this automatic cutup system. There are a number of factors that make the development of such a vision system a challenge. First there is the innate variability of the wood material itself. No two species look exactly the same, in fact, they can have a significant visual difference in appearance among species. Yet a truly robust vision system must be able to handle a variety of such species, preferably with no operator intervention required when changing from one species to another. Secondly, there is a good deal of variability in the definition of what constitutes a removable defect. The hardwood furniture and fixture industry is diverse in the nature of the products that it makes. The products range from hardwood flooring to fancy hardwood furniture, from simple mill work to kitchen cabinets. Thus depending on the manufacturer, the product, and the quality of the product the nature of what constitutes a removable defect can and does vary. The vision system must be such that it can be tailored to meet each of these unique needs, preferably without any additional program modifications. This paper will describe the vision system that has been developed. It will assess the current system capabilities, and it will discuss the directions for future research. It will be argued that artificial intelligence methods provide a natural mechanism for attacking this computer vision application.

  16. shaping-lathe headrig yields solid and molded-flake hardwood products (United States)

    Peter Koch; R.A. Caughey


    A shaping-lathe headrig, operated one shift daily, can be used to manufacture hardwood cants to be resawed into pallet shook, one-piece and dowel-laminated crossties, posts and rails, and other solid wood products in lengths from 6 to 9 feet. Residual flakes machined by the headrig supply a three-shift operation in which molded pallets and 4- by 8-foot sheets of...

  17. Utilization of hardwood as a chemical raw material in Latvian SSSR

    Energy Technology Data Exchange (ETDEWEB)

    Kalnin' sh, A; Vedernikov, N


    A successful solution to the problem of complex utilization of hardwood is abused on differential chemical action on the main wood components. Furfural is obtained by a directed conversion of pentosans with a yield of 70 to 80% of the theoretical maximum, while preserving the cellulose for subsequent hydrolysis (less than 10% loss). A new method is described for the rapid hydrolysis of cellulose; the resultant sugar solution can be used for the isolation of glucose or the production of fodder yeast.

  18. Spatial and temporal patterns of beetles associated with coarse woody debris in managed bottomland hardwood forests (United States)

    Michael D. Ulyshen; James L. Hanula; Scott Horn; John C. Kilgo; Christopher E. Moorman


    Malaise traps were used to sample beetles in artificial canopy gaps of different size (0.13 ha, 0.26 ha, and 0.50 ha) and age in a South Carolina bottomland hardwood forest. Traps were placed at the center, edge, and in the surrounding forest of each gap. Young gaps (~1 year) had large amounts of coarse woody debris compared to the surrounding forest, while older gaps...

  19. Production and cost analysis of a feller-buncher in central Appalachian hardwood forest (United States)

    Charlie Long; Jingxin Wang; Joe McNeel; John Baumgras; John Baumgras


    A time study was conducted to evaluate the productivity and cost of a feller-buncher operating in a Central Appalachian hardwood forest. The sites harvested during observation consisted of primarily red maple and black cherry. Trees felled in the study had an average diameter at breast height (DBH) of 16.1 in. and a total merchantable height of 16 ft. A Timbco 445C...

  20. California's hardwood resource: managing for wildlife, water, pleasing scenery, and wood products (United States)

    Philip M. McDonald; Dean W. Huber


    A new management perspective that emphasizes a variety of amenities and commodities is needed for California’s forest-zone hardwoods. For the near future and perhaps more on public than on private land, these "yields" are wildlife, water, esthetics, and wood products. Each is presented first as an individual yield and then as part of a combined yield. As an...

  1. Increasing soil temperature in a northern hardwood forest: effects on elemental dynamics and primary productivity (United States)

    Patrick J. McHale; Myron J. Mitchell; Dudley J. Raynal; Francis P. Bowles


    To investigate the effects of elevated soil temperatures on a forest ecosystem, heating cables were buried at a depth of 5 cm within the forest floor of a northern hardwood forest at the Huntington Wildlife Forest (Adirondack Mountains, New York). Temperature was elevated 2.5, 5.0 and 7.5?C above ambient, during May - September in both 1993 and 1994. Various aspects of...

  2. Selective depredation of planted hardwood seedlings by wild pigs in a wetland restoration area

    International Nuclear Information System (INIS)

    Mayer, J.J.


    Following the planting of several thousand hardwood seedlings in a 69-ha wetland restoration area in west-central South Carolina, wild pigs (Sus scrofa) depredated a large percentage of the young trees. This planting was undertaken as part of a mitigation effort to restore a bottomland hardwood community in the corridor and delta of a third order stream that had been previously impacted by the discharge of heated nuclear reactor effluent. The depredated restoration areas had been pretreated with both herbicide and control burning prior to planting the hardwood seedlings. After discovery of the wild pig damage, these areas were surveyed on foot to assess the magnitude of the depredation on the planted seedling crop. Foraging by the local wild pigs in the pretreatment areas selectively impacted only four of the nine hardwood species used in this restoration effort. Based on the surveys, the remaining five species did not appear to have been impacted at all. A variety of reasons could be used to explain this phenomenon. The pretreatment methodology is thought to have been the primary aspect of the restoration program that initially led the wild pigs to discover the planted seedlings. In addition, it is possible that a combination of other factors associated with odor and taste may have resulted in the selective depredation. Future wetland restoration efforts in areas with wild pigs should consider pretreatment methods and species to be planted. If pretreatment methods and species such as discussed in the present study must be used, then the prior removal of wild pigs from surrounding lands will help prevent depredations by this non-native species

  3. Opportunities for expanded and higher value utilization of No. 3A Common hardwood lumber (United States)

    Brian P. Shepley; Jan Wiedenbeck; Robert L. Smith


    The percentage of low-grade material composing the annual hardwood lumber production in the United States is on the rise. As a result, finding markets for low-grade and low-value lumber has been identified as a top priority by researchers and industry associations. This research used the ROMI-RIP and ROMI-CROSS simulation programs to determine specific conditions that...

  4. Selective depredation of planted hardwood seedlings by wild pigs in a wetland restoration area

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, J.J.


    Following the planting of several thousand hardwood seedlings in a 69-ha wetland restoration area in west-central South Carolina, wild pigs (Sus scrofa) depredated a large percentage of the young trees. This planting was undertaken as part of a mitigation effort to restore a bottomland hardwood community in the corridor and delta of a third order stream that had been previously impacted by the discharge of heated nuclear reactor effluent. The depredated restoration areas had been pretreated with both herbicide and control burning prior to planting the hardwood seedlings. After discovery of the wild pig damage, these areas were surveyed on foot to assess the magnitude of the depredation on the planted seedling crop. Foraging by the local wild pigs in the pretreatment areas selectively impacted only four of the nine hardwood species used in this restoration effort. Based on the surveys, the remaining five species did not appear to have been impacted at all. A variety of reasons could be used to explain this phenomenon. The pretreatment methodology is thought to have been the primary aspect of the restoration program that initially led the wild pigs to discover the planted seedlings. In addition, it is possible that a combination of other factors associated with odor and taste may have resulted in the selective depredation. Future wetland restoration efforts in areas with wild pigs should consider pretreatment methods and species to be planted. If pretreatment methods and species such as discussed in the present study must be used, then the prior removal of wild pigs from surrounding lands will help prevent depredations by this non-native species.

  5. Rare Plants of Southeastern Hardwood Forests and the Role of Predictive Modeling

    International Nuclear Information System (INIS)

    Imm, D.W.; Shealy, H.E. Jr.; McLeod, K.W.; Collins, B.


    Habitat prediction models for rare plants can be useful when large areas must be surveyed or populations must be established. Investigators developed a habitat prediction model for four species of Southeastern hardwood forests. These four examples suggest that models based on resource and vegetation characteristics can accurately predict habitat, but only when plants are strongly associated with these variables and the scale of modeling coincides with habitat size

  6. Four test-demonstrations of hardwood log grades in the Northeast (United States)

    George E. Doverspike; Harry W., Jr. Camp


    Farmers don't sell prime steers for the same price per pound as canner cows. Lumber dealers don't sell top-quality boards for the same price as Number 3 Common. If you are a timber owner, why should you sell hardwood trees or logs without considering their quality? Logs that yield a high proportion of their volume in the better grades of lumber are certainly...

  7. Effect of logging wounds on diameter growth of sawlog-size Appalachian hardwood crop trees (United States)

    Neil I. Lamson; H. Clay Smith; H. Clay Smith


    In previously thinned, even-aged Appalachian hardwood stands, 5-year diameter growth of 102 wounded and 102 unwounded codominant crop trees were compared. A wounded crop tre was defined as one with at least one exposed sapwood logging wound at least 100 inch2 in size. An unwounded crop tree of the same species and size was selected near each of the 102 wounded trees....

  8. Logging damage associated with thinning central Appalachian hardwood stands with a wheeled skidder (United States)

    Gary W. Miller; Neil I. Lamson; Samuel M. Brock


    In north central West Virginia, unmanaged 53-year-old, mixed oak-cove hardwood stands were thinned to 75, 60, and 45 percent residual stocking. Cut trees were skidded tree-length with a rubber-tired skidder. Logging destroyed or severely bent 26, 29, and 34 percent of the unmarked stems in the 75, 60, and 45 percent stocking plots, respectively. Because 94 percent of...

  9. Effects of rhododendron removal on the water use of hardwood species following eastern hemlock mortality (United States)

    Hawthorne, S. N.; Miniat, C.; Elliott, K.


    Forest disturbance that alters vegetation species composition can affect ecosystem productivity and function. The loss of eastern hemlock (Tsuga canadensis) to hemlock woolly adelgid infestations in southern Appalachian Mountains has resulted in more than a two-fold increase in growth of co-occurring rhododendron (Rhododendron maximum) understory, evergreen shrubs. In contrast, the growth of hardwood species increased by 1.2 fold during the same 5 year period following infestation. This study examines the effects of mechanically removing the rhododendron shrub layer on water use and growth of hardwood species. The treatment—hypothesized to speed ecosystem recovery of structure and function—involved cutting, spreading and burning rhododendron stems to remove both rhododendron and soil O-horizon. Sap flow, soil moisture and micro-climate (humidity, temperature) were measured in a pair of reference and treated plots. Preliminary results from the relatively dry summer/fall 2016 have shown that the mean daily transpiration (Et) of the treated plot was 24% greater than the mean daily Et of hardwood trees in the reference plot (t-test, p treatment plots compared to the reference plots. This suggests that the removal of the shrub layer reduced competition for resources for the canopy and seedling trees, which may increase tree growth and recruitment. Thus, in the wake of hemlock loss, recovery of riparian forest structure and function may be aided with shrub layer removal.

  10. Stiffness and Density Analysis of Rotary Veneer Recovered from Six Species of Australian Plantation Hardwoods

    Directory of Open Access Journals (Sweden)

    Robert Lee McGavin


    Full Text Available Commercial interest in Australian hardwood plantations is increasing. The timber industry is investigating alternative supplies of forest resources, and the plantation growing industry is eager to explore alternative markets to maximize financial returns. Identifying suitable processing strategies and high-value products that suit young, plantation-grown hardwoods have proven challenging; however, recent veneer processing trials using simple veneer technology have demonstrated more acceptable recoveries of marketable products. The recovered veneers have visual qualities that are suitable for structurally-based products; however, the mechanical properties of the veneer are largely unknown. Veneers resulting from processing trials of six commercially important Australian hardwood species were used to determine key wood properties (i.e., density, dynamic modulus of elasticity (MoE, and specific MoE. The study revealed that a wide variation of properties existed between species and also within species. Simple mathematical modeling, using sigmoidal curves, was demonstrated to be an effective method to model the evolution of key wood properties across the billet radius and along the resulting veneer ribbon with benefits for tree breeders and processors.

  11. Changes in faunal and vegetation communities along a soil calcium gradient in northern hardwood forests (United States)

    Beier, Colin M.; Woods, Anne M.; Hotopp, Kenneth P.; Gibbs, James P.; Mitchell, Myron J.; Dovciak, Martin; Leopold, Donald J.; Lawrence, Gregory B.; Page, Blair D.


    Depletion of Ca from forest soils due to acidic deposition has had potentially pervasive effects on forest communities, but these impacts remain largely unknown. Because snails, salamanders, and plants play essential roles in the Ca cycle of northern hardwood forests, we hypothesized that their community diversity, abundance, and structure would vary with differences in biotic Ca availability. To test this hypothesis, we sampled 12 upland hardwood forests representing a soil Ca gradient in the Adirondack Mountains, New York (USA), where chronic deposition has resulted in acidified soils but where areas of well-buffered soils remain Ca rich due to parent materials. Along the gradient of increasing soil [Ca2+], we observed increasing trends in snail community richness and abundance, live biomass of redback salamanders (Plethodon cinereus (Green, 1818)), and canopy tree basal area. Salamander communities were dominated by mountain dusky salamanders (Desmognathus ochrophaeus Cope, 1859) at Ca-poor sites and changed continuously along the Ca gradient to become dominated by redback salamanders at the Ca-rich sites. Several known calciphilic species of snails and plants were found only at the highest-Ca sites. Our results indicated that Ca availability, which is shaped by geology and acidic deposition inputs, influences northern hardwood forest ecosystems at multiple trophic levels, although the underlying mechanisms require further study.

  12. Encroachment Dynamics of Juniperus virginiana L. and Mesic Hardwood Species into Cross Timbers Forests of North-Central Oklahoma, USA

    Directory of Open Access Journals (Sweden)

    Daniel L. Hoff


    Full Text Available Cross Timbers forests, typically dominated by Quercus stellata Wangenh. and Q. marilandica Muenchh., are the transition zone between eastern deciduous forest and prairie in the southern Great Plains. Fire exclusion beginning in the mid-1900s has led to increasing stand density and encroachment of fire-intolerant Juniperus virginiana L. and mesic hardwood. We measured current forest structure and tree ages of 25 stands (130 plots in north-central Oklahoma to characterize the extent and dynamics of encroachment. The respective basal area and stand density of the overstory (diameter at breast height; dbh > 10 cm were 19.0 m2 ha−1 and 407 trees ha−1 with Q. stellata comprising 43% of basal area and 42% of stand density. Quercus marilandica represented only 3% of basal area and 4% of overstory density. Juniperus virginiana represented 7% of basal area and 14% of stand density while mesic hardwoods, e.g., Celtis spp., Ulmus spp., Carya spp., 33% of basal area and stand density. The sapling layer was dominated by mesic hardwoods (68% and J. virginiana (25% while the seedling layer was dominated by mesic hardwoods (74%. The majority of Quercus recruited into the overstory between 1910–1970, while recruitment of J. virginiana and mesic hardwoods began more recently (post 1950s. Growth rate, based on the relationship between age and dbh, was faster for mesic hardwoods than for J. virginiana and Q. stellata. These results indicate that removal of recurrent surface fire as a disturbance agent has significantly altered forest composition in the Cross Timbers region by allowing encroachment of J. virginiana and fire-intolerant, mesic hardwoods. This increases wildfire risk because J. virginiana is very flammable and will alter how these forests respond to future drought and other disturbance events.

  13. Concept of an integrated waste economy represented on the example of recycling of valuable materials

    Energy Technology Data Exchange (ETDEWEB)

    Wender, H


    The historical development of waste elimination is discussed, followed by the waste problem in an environmental discussion, the possibilities of recycling within the framework of a waste industry, and the solution of the waste problem from a waste-economy viewpoint, including the definition of 'waste' and the grouping by types of waste, their amounts and increase rates, composition and valuable materials in community wastes with a review of waste technologies under waste-economy viewpoints. This is followed by a discussion of the sales possibilities for valuable components from mechanical sorting facilities, including used paper, old glass, hard substances, metals, plastics, succeeded by a comparative evaluation method, and the national economy aspect of the waste industry, with the savings effect in raw materials for different branches, effects on raw material reserves, the problem of dependence on imports, waste rates and living standard, and the importance of environmental instruments which are discussed in detail.

  14. Mango (Mangifera indica L.) by-products and their valuable components: a review. (United States)

    Jahurul, M H A; Zaidul, I S M; Ghafoor, Kashif; Al-Juhaimi, Fahad Y; Nyam, Kar-Lin; Norulaini, N A N; Sahena, F; Mohd Omar, A K


    The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Overstory tree status following thinning and burning treatments in mixed pine-hardwood stands on the William B. Bankhead National Forest, Alabama (United States)

    Callie Jo Schweitzer; Yong Wang


    Prescribed burning and thinning are intermediate stand treatments whose consequences when applied in mixed pine-hardwood stands are unknown. The William B. Bankhead National Forest in northcentral Alabama has undertaken these two options to move unmanaged, 20- to 50-year-old loblolly pine (Pinus taeda L.) plantations towards upland hardwood-dominated...

  16. Introduction to natural disturbances and historic range of variation: type, frequency, severity, and post-disturbance structure in central hardwood forests (United States)

    Katie Greenberg; Beverly S. Collins; Henry McNab; Douglas K. Miller; Gary R. Wein


    EXCERPT FROM: Natural Disturbances and Historic Range Variation 2015. Throughout the history of upland hardwood forests of the Central Hardwood Region, natural disturbances have been integral to shaping forest structure and composition, and essential in maintaining diverse biotic...

  17. A graphical automated detection system to locate hardwood log surface defects using high-resolution three-dimensional laser scan data (United States)

    Liya Thomas; R. Edward. Thomas


    We have developed an automated defect detection system and a state-of-the-art Graphic User Interface (GUI) for hardwood logs. The algorithm identifies defects at least 0.5 inch high and at least 3 inches in diameter on barked hardwood log and stem surfaces. To summarize defect features and to build a knowledge base, hundreds of defects were measured, photographed, and...

  18. Mapping hardwood mortality for the early detection of P. ramorum: an assessment of aerial surveys and object-oriented image analysis (United States)

    Erik Haunreiter; Zhanfeng Liu; Jeff Mai; Zachary Heath; Lisa Fischer


    Effective monitoring and identification of areas of hardwood mortality is a critical component in the management of sudden oak death (SOD). From 2001 to 2005, aerial surveys covering 13.5 million acres in California were conducted to map and monitor hardwood mortality for the early detection of Phytophthora ramorum, the pathogen responsible for SOD....

  19. Hypnosis as a Valuable Tool for Surgical Procedures in the Oral and Maxillofacial Area. (United States)

    Montenegro, Gil; Alves, Luiza; Zaninotto, Ana Luiza; Falcão, Denise Pinheiro; de Amorim, Rivadávio Fernandes Batista


    Hypnosis is a valuable tool in the management of patients who undergo surgical procedures in the maxillofacial complex, particularly in reducing and eliminating pain during surgery and aiding patients who have dental fear and are allergic to anesthesia. This case report demonstrates the efficacy of hypnosis in mitigating anxiety, bleeding, and pain during dental surgery without anesthesia during implant placement of tooth 14, the upper left first molar.

  20. The cost of being valuable: predictors of extinction risk in marine invertebrates exploited as luxury seafood


    Purcell, Steven W.; Polidoro, Beth A.; Hamel, Jean-François; Gamboa, Ruth U.; Mercier, Annie


    Extinction risk has been linked to biological and anthropogenic variables. Prediction of extinction risk in valuable fauna may not follow mainstream drivers when species are exploited for international markets. We use results from an International Union for Conservation of Nature Red List assessment of extinction risk in all 377 known species of sea cucumber within the order Aspidochirotida, many of which are exploited worldwide as luxury seafood for Asian markets. Extinction risk was primari...

  1. Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

    International Nuclear Information System (INIS)

    Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih; Leong, Susanna Su Jan; Chang, Matthew Wook


    Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

  2. Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Leong, Susanna Su Jan [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Singapore Institute of Technology, Singapore (Singapore); Chang, Matthew Wook, E-mail: [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore)


    Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

  3. World`s Most Valuable Brand Resonation With Categories of Different Customer Needs

    Directory of Open Access Journals (Sweden)

    Kaspars VIKSNE


    Full Text Available One of the key performance indicators of brand success is its value. Brand value is an outcome of brand`s performance in market, and is largely depended from brand`s ability to satisfy certain customer needs. For the greatest success in the world`s market brand should resonate its ability to satisfy some of customer`s most universal needs. In this paper authors strives to find out which of the needs world`s most successful brands are resonating with. Therefore paper goal is to is to determine what customer needs world`s most valuable brands are primarily satisfying. First part of paper authors briefly evaluate Maslow theory of needs. In second part of paper authors identify main challenges of brand valuation, and briefly describe today`s most valuable brands. In third part of paper authors analyzes if resonating certain human need in brand makes it to be more valuable. In last part of paper authors summarizes the main findings and gives recommendations for better marketing practices to other brands whose owners have high market ambitions. In order to attain the paper`s goal, authors will use following research methods: Comparative analysis for comparing brands in different brand rankings; Content analysis for determining what need satisfaction brand advertisements resonate; Data analysis for quantify the results gathered from content analysis

  4. The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES) (United States)

    Kuwayama, Y.; Mabee, B.; Wulf Tregar, S.


    National and international organizations are placing greater emphasis on the societal and economic benefits that can be derived from applications of Earth observations, yet improvements are needed to connect to the decision processes that produce actions with direct societal benefits. There is a need to substantiate the benefits of Earth science applications in socially and economically meaningful terms in order to demonstrate return on investment and to prioritize investments across data products, modeling capabilities, and information systems. However, methods and techniques for quantifying the value proposition of Earth observations are currently not fully established. Furthermore, it has been challenging to communicate the value of these investments to audiences beyond the Earth science community. The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES), a cooperative agreement between Resources for the Future (RFF) and the National Aeronautics and Space Administration (NASA), has the goal of advancing methods for the valuation and communication of the applied benefits linked with Earth observations. The VALUABLES Consortium will focus on three pillars: (a) a research pillar that will apply existing and innovative methods to quantify the socioeconomic benefits of information from Earth observations; (b) a capacity building pillar to catalyze interdisciplinary linkages between Earth scientists and social scientists; and (c) a communications pillar that will convey the value of Earth observations to stakeholders in government, universities, the NGO community, and the interested public. In this presentation, we will describe ongoing and future activities of the VALUABLES Consortium, provide a brief overview of frameworks to quantify the socioeconomic value of Earth observations, and describe how Earth scientists and social scientist can get involved in the Consortium's activities.

  5. Activating Processes in the Brand Communication of Valuable Brands on the example of Coca-Cola.


    Pöhler, Marie-Luise


    Everyone in the world, from the streets of Paris to the villages in Africa, knows the logo with the white letters that are written on a bright red background. Coca-Cola was introduced in 1886. In that year, only nine glasses of the soda drink were sold per day. So how did the little company from Atlanta become the world’s most valuable and popular soft drink? One of the company’s secrets is its emotional and memorable advertising strategies. Therefore, this thesis explains and analyzes ho...

  6. Determination of commercially valuable characteristics of plant varieties for energetic use during the state examination

    Directory of Open Access Journals (Sweden)

    В. В. Баликіна


    Full Text Available The analysis of commercially valuable indices of plant varieties for energetic use was carried out and the necessity to determine energetic indices during the state scientific-and-technical examination is substantiated. In order to explain the requirements for registration of new varieties of energy crops concerning the defi nition of indices of ability for distribution, the collection of species and hybrid forms of willow was used. Factors that prove the economic and environmental advantages of energy willow cultivation for biofuel are specifi ed.

  7. The intrapreneur: A distinct and valuable role to be institutionalized and strategically managed

    DEFF Research Database (Denmark)

    Ashourizadeh, Shayegheh; Schøtt, Thomas

    are distinct from routine employees and somewhat similar to entrepreneurs. Thereby intrapreneurs are a human resource that by developing new activities for their employer and also by creating new jobs is very valuable. – The rate of intrapreneurship among employees is higher in Denmark than in almost all other......, especially in Denmark, to adopt strategies for institutionalization and management of this human resource....... more frequently than routine employees are self-efficacious, opportunity-perceiving, risk-willing and role-modeling starters, have meaningful and autonomous jobs, and are satisfied with their jobs and salary, but also experience more stress in work; and in these job-characteristics intrapreneurs...

  8. Process for the extraction of valuable products from coals, pitches, mineral oils, and the like

    Energy Technology Data Exchange (ETDEWEB)


    A process is described for the treating of coke, lignite, peat, etc., and mineral oils with the help of hydrogen or other reducing gases and under pressure to recover valuable hydrocarbons, characterized by the carbonaceous substances and the reducing gas coming together already heated totally or in part at least from 350/sup 0/C to the temperature necessary for the reaction. The substances to be treated becoming extracted in the form of paste or liquid from the reaction chamber and then returned to it and being reacted outside the reaction zone in the presence of the reducing gases at the temperature necessary for the reaction.

  9. Inventory of species and cultivars potentially valuable for forest/biomass production

    Energy Technology Data Exchange (ETDEWEB)

    Lavoie, G


    To prepare a guide for experiments in mini-rotation or short rotation forest production, potentially valuable species and cultivars have been inventoried. In this text, 288 species are listed under 31 genera, 27 deciduous and 4 coniferous. This partial inventory was made for the Northern Hemisphere and different climates, ranging from the tropical zone to the cold temperate zone. To be included a species had to satisfy the following conditions: ease of established and rapid juvenile growth. The list of species and cultivars is given in alphabetical order. 55 references.

  10. Prescribed Burning and Erosion Potential in Mixed Hardwood Forests of Southern Illinois

    Directory of Open Access Journals (Sweden)

    Gurbir Singh


    Full Text Available Prescribed fire has several benefits for managing forest ecosystems including reduction of fuel loading and invasive species and enhanced regeneration of desirable tree species. Along with these benefits there are some limitations like nutrient and sediment loss which have not been studied extensively in mixed hardwood forests. The objective of our research was to quantify the amount of sediment movement occurring on a watershed scale due to prescribed fire in a southern Illinois mixed hardwood ecosystem. The research site was located at Trail of Tears State Forest in western Union county, IL, USA and included five watershed pairs. One watershed in each pair was randomly assigned the prescribed burn treatment and the other remained as control (i.e., unburned. The prescribed burn treatment significantly reduced the litter depth with 12.6%–31.5% litter remaining in the prescribed burn treatment watersheds. When data were combined across all watersheds, no significant differences were obtained between burn treatment and control watershed for total suspended solids and sediment concentrations or loads. The annual sediment losses varied from 1.41 to 90.54 kg·ha−1·year−1 in the four prescribed burn watersheds and 0.81 to 2.54 kg·ha−1·year−1 in the four control watersheds. Prescribed burn watershed 7 showed an average soil sediment loss of 4.2 mm, whereas control watershed 8 showed an average accumulation of sediments (9.9 mm, possibly due to steeper slopes. Prescribed burning did not cause a significant increase in soil erosion and sediment loss and can be considered acceptable in managing mixed hardwood forests of Ozark uplands and the Shawnee Hills physiographic regions of southern Illinois.

  11. Valuable books from the library of Paul Gore (Identification and/or inventory of sources

    Directory of Open Access Journals (Sweden)

    Maria Danilov


    Full Text Available Paul Gore (1875-1927 - an outstanding figure of the socio-political, scientific and cultural life of Bessarabia at the beginning of 20th century, was also known among his contemporaries as a keen collector of old and rare books. Undoubtedly, the most valuable part of the library of Paul Gore consisted of books on the history of Bessarabia. Documents from the National Archives of the Republic of Moldova in Chişinău confirm that he inherited a large part of books from his father Gheorghe Gore (1839-1909. A study of the Paul Gore Fund at the National Archives of Romania in Bucharest gave us a lot of documentary evidence of the destiny of this Bessarabian noble library, which later became a property of the King Ferdinand Fund. However, the fate of its most valuable part - books on the history of Bessarabia, consisted of 651 units of the total number of 6456 volumes - is still unknown.

  12. An alternative approach to recovering valuable metals from zinc phosphating sludge. (United States)

    Kuo, Yi-Ming


    This study used a vitrification process (with good potential for commercialization) to recover valuable metals from Zn phosphating sludge. The involved vitrification process achieves two major goals: it transformed hazardous Zn phosphating sludge into inert slag and it concentrated Fe (83.5%) and Zn (92.8%) into ingot and fine particulate-phase material, respectively. The Fe content in the ingot was 278,000 mg/kg, making the ingot a potential raw material for iron making. The fine particulate-phase material (collected from flue gas) contained abundant Zn (544,000 mg/kg) in the form of ZnO. The content (67.7%) of ZnO was high, so it can be directly sold to refineries. The recovered coarse particulate-phase material, with insufficient amount of ZnO, can be recycled as a feeding material for Zn re-concentration. Therefore, the vitrification process can not only treat hazardous materials but also effectively recover valuable metals. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. Deep cleaning of a metallurgical zinc leaching residue and recovery of valuable metals (United States)

    Xing, Peng; Ma, Bao-zhong; Zeng, Peng; Wang, Cheng-yan; Wang, Ling; Zhang, Yong-lu; Chen, Yong-qiang; Wang, Shuo; Wang, Qiu-yin


    Huge quantities of zinc leaching residues (ZLRs) generated from zinc production are dumped continuously around the world and pose a potential environmental threat because of their considerable amounts of entrained heavy metals (mainly lead). Most ZLRs have not been properly treated and the valuable metals in them have not yet been effectively recovered. Herein, the deep cleaning of a ZLR and recovery of valuable metals via a hydrometallurgical route were investigated. The cleaning process consists of two essential stages: acid leaching followed by calcium chloride leaching. The optimum conditions for extracting zinc, copper, and indium by acid leaching were a sulfuric acid concentration of 200 g·L-1, a liquid/solid ratio of 4:1 (mL/g), a leaching time of 2 h, and a temperature of 90°C. For lead and silver extractions, the optimum conditions were a calcium chloride concentration of 400 g·L-1, a pH value of 1.0, a leaching time of 1 h, and a temperature of 30°C. After calcium chloride leaching, silver and lead were extracted out and the lead was finally recovered as electrolytic lead by electrowinning. The anglesite phase, which poses the greatest potential environmental hazard, was removed from the ZLR after deep cleaning, thus reducing the cost of environmental management of ZLRs. The treatment of chlorine and spent electrolyte generated in the process was discussed.

  14. Foraging behavior of three passerines in mature bottomland hardwood forests during summer.

    Energy Technology Data Exchange (ETDEWEB)

    Buffington, J., Matthew; Kilgo, John, C.; Sargent, Robert, A.; Miller, Karl, V.; Chapman, Brian, R.


    Attention has focused on forest management practices and the interactions between birds and their habitat, as a result of apparent declines in populations of many forest birds. Although avian diversity and abundance have been studied in various forest habitats, avian foraging behavior is less well known. Although there are published descriptions of avian foraging behaviors in the western United States descriptions from the southeastern United States are less common. This article reports on the foraging behavior of the White-eyed Vireo, Northern Parula, and Hooded Warbler in mature bottomland hardwood forests in South Carolina.

  15. Lobster processing by-products as valuable bioresource of marine functional ingredients, nutraceuticals, and pharmaceuticals. (United States)

    Nguyen, Trung T; Barber, Andrew R; Corbin, Kendall; Zhang, Wei


    The worldwide annual production of lobster was 165,367 tons valued over $3.32 billion in 2004, but this figure rose up to 304,000 tons in 2012. Over half the volume of the worldwide lobster production has been processed to meet the rising global demand in diversified lobster products. Lobster processing generates a large amount of by-products (heads, shells, livers, and eggs) which account for 50-70% of the starting material. Continued production of these lobster processing by-products (LPBs) without corresponding process development for efficient utilization has led to disposal issues associated with costs and pollutions. This review presents the promising opportunities to maximize the utilization of LPBs by economic recovery of their valuable components to produce high value-added products. More than 50,000 tons of LPBs are globally generated, which costs lobster processing companies upward of about $7.5 million/year for disposal. This not only presents financial and environmental burdens to the lobster processors but also wastes a valuable bioresource. LPBs are rich in a range of high-value compounds such as proteins, chitin, lipids, minerals, and pigments. Extracts recovered from LPBs have been demonstrated to possess several functionalities and bioactivities, which are useful for numerous applications in water treatment, agriculture, food, nutraceutical, pharmaceutical products, and biomedicine. Although LPBs have been studied for recovery of valuable components, utilization of these materials for the large-scale production is still very limited. Extraction of lobster components using microwave, ultrasonic, and supercritical fluid extraction were found to be promising techniques that could be used for large-scale production. LPBs are rich in high-value compounds that are currently being underutilized. These compounds can be extracted for being used as functional ingredients, nutraceuticals, and pharmaceuticals in a wide range of commercial applications

  16. Professional Regulation: A Potentially Valuable Tool in Responding to “Stem Cell Tourism”

    Directory of Open Access Journals (Sweden)

    Amy Zarzeczny


    Full Text Available The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet (“stem cell tourism” is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market.

  17. Resource specialization, customer orientation, and firm performance: an empirical investigation of valuable resources

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe


    This study contributes to the strategic marketing research by empirically investigating the role of customer orientation in explaining how firms leverage their specialized but vulnerable resources. The aim is thus to explore a subset of the means by which resources become valuable to the firm...... – the first criterion for a strategic resource. Hypotheses are developed and tested using CEO questionnaire responses from a sample of manufacturing firms and census accounting data. The results show that there is a strong link between industry-specific resources and return on assets for firms with high...... levels of customer orientation. We also report that firm-specific resources are unrelated to firm performance and that a customer orientation – investigated in isolation, may be detrimental to firm performance. Research and managerial implications are discussed....

  18. Cashew nut shell liquid, a valuable raw material for generating semiconductive polyaniline nanofibers

    Directory of Open Access Journals (Sweden)

    Raiane Valenti Gonçalves


    Full Text Available Abstract Cashew nut shell liquid (CNSL is an abundant and renewable by-product of the cashew nut industry. It appears to be a valuable raw material for generating semiconductive polyaniline (PAni nanomaterial with enhanced thermal stability and well-defined nanofiber morphology following a polymerization dispersion process. This study confirms that CNSL acts as a soft template during PAni synthesis, leading to an improvement in the nanofiber aspect. CNSL also improves the thermal stability of the PAni nanomaterial. Moreover, CNSL is an effective surfactant that promotes and stabilizes the dispersion of PAni nanofibers within water, allowing the more ecofriendly preparation of PAni nanomaterial by substituting the commonly used organic solvent with aqueous media. Finally, although CNSL promotes the formation of the conductive emeraldine salt form of PAni, increasing CNSL concentrations appear to plasticize the PAni polymer, leading to reduced electrical conductivity. However, this reduction is not detrimental, and PAni nanofibers remain semiconductive even under high CNSL concentrations.

  19. Recovery of valuable products in liquid effluents from uranium and thorium pilot units

    International Nuclear Information System (INIS)

    Jardim, E.A.; Abrao, A.


    IPEN-CNEN/SP has being very active in refining yellowcake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, uranium tetra- and hexafluoride in a sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major waste to be worked is the refinate from the solvent extraction column where uranium and thorium are purified via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid and ammonium nitrate. Distilled nitric acid and the final sulfuric acid as residue are recycle. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium-free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximise the recycle and reuse of the abovementioned chemicals. (author) [pt

  20. The jet impingement cell: A valuable device for investigating CO{sub 2} corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Kinsella, Brian; John, Douglas; Bailey, Stuart; De Marco, Roland [Western Australian Corrosion Research Group, School of Applied Chemistry, Curtin University of Technology, GPO Box U1987, Perth WA, 6845 (Australia)


    The jet impingement cell (JIC) is a valuable technique for the investigation of carbon dioxide corrosion of steel and its inhibition under high flow conditions or high wall shear stress. Despite the use of the JIC in corrosion testing laboratories not a great deal has been published on the design and calibration of these cells. In the evaluation of corrosion inhibitors, the type of corrosion and relative performance of the inhibitors depends on the metallurgy of the steel used to manufacture electrodes and measure the corrosion rate. This paper covers aspects of cell design and the determination of mass transfer and wall shear stress at electrodes used in the cell. The performance of different generic type corrosion inhibitors and their affect on the type of corrosion (i.e, uniform, pitting and crevice corrosion) is shown and discussed. (authors)

  1. Scala vestibuli insertion in cochlear implantation: a valuable alternative for cases with obstructed scala tympani. (United States)

    Kiefer, J; Weber, A; Pfennigdorff, T; von Ilberg, C


    Insertion of a sufficient number of electrodes is important for a successful use of cochlear implants. We investigated the results of scala vestibuli insertion for cochlear implantation in cases of obstructed scala tympani. In a series of 200 cochlear implantations, scala vestibuli insertion was successfully performed in 4 cases with obstruction of the scala tympani. Etiologies included a temporal bone fracture, severe otosclerosis and malformations of the cochlea. The maximum insertion depth obtained via the scala vestibuli was 30 mm. Postoperative results were comparable to patients in whom conventional scala tympani insertion was performed. No adverse effects related to the site of insertion were observed. Scala vestibuli insertion offers a valuable alternative in cases of obstructed scala tympani that can be employed for a variety of etiologies. Copyright 2000 S. Karger AG, Basel

  2. Assessment of Itakura Distance as a valuable feature for computer-aided classification of sleep stages. (United States)

    Ebrahimi, F; Mikaili, M; Estrada, E; Nazeran, H


    Staging and detection of various states of sleep derived from EEG and other biomedical signals have proven to be very helpful in diagnosis, prognosis and remedy of various sleep related disorders. The time consuming and costly process of visual scoring of sleep stages by a specialist has always motivated researchers to develop an automatic sleep scoring system and the first step toward achieving this task is finding discriminating characteristics (or features) for each stage. A vast variety of these features and methods have been investigated in the sleep literature with different degrees of success. In this study, we investigated the performance of a newly introduced measure: the Itakura Distance (ID), as a similarity measure between EEG and EOG signals. This work demonstrated and further confirmed the outcomes of our previous research that the Itakura Distance serves as a valuable similarity measure to differentiate between different sleep stages.

  3. Interferon-γ, a valuable surrogate marker of Plasmodium falciparum pre-erythrocytic stages protective immunity

    Directory of Open Access Journals (Sweden)

    BenMohamed Lbachir


    Full Text Available Abstract Immunity against the pre-erythrocytic stages of malaria is the most promising, as it is strong and fully sterilizing. Yet, the underlying immune effectors against the human Plasmodium falciparum pre-erythrocytic stages remain surprisingly poorly known and have been little explored, which in turn prevents any rational vaccine progress. Evidence that has been gathered in vitro and in vivo, in higher primates and in humans, is reviewed here, emphasizing the significant role of IFN-γ, either as a critical immune mediator or at least as a valuable surrogate marker of protection. One may hope that these results will trigger investigations in volunteers immunized either by optimally irradiated or over-irradiated sporozoites, to quickly delineate better surrogates of protection, which are essential for the development of a successful malaria vaccine.

  4. Parasites as valuable stock markers for fisheries in Australasia, East Asia and the Pacific Islands. (United States)

    Lester, R J G; Moore, B R


    Over 30 studies in Australasia, East Asia and the Pacific Islands region have collected and analysed parasite data to determine the ranges of individual fish, many leading to conclusions about stock delineation. Parasites used as biological tags have included both those known to have long residence times in the fish and those thought to be relatively transient. In many cases the parasitological conclusions have been supported by other methods especially analysis of the chemical constituents of otoliths, and to a lesser extent, genetic data. In analysing parasite data, authors have applied multiple different statistical methodologies, including summary statistics, and univariate and multivariate approaches. Recently, a growing number of researchers have found non-parametric methods, such as analysis of similarities and cluster analysis, to be valuable. Future studies into the residence times, life cycles and geographical distributions of parasites together with more robust analytical methods will yield much important information to clarify stock structures in the area.

  5. MALDI TOF imaging mass spectrometry in clinical pathology: a valuable tool for cancer diagnostics (review). (United States)

    Kriegsmann, Jörg; Kriegsmann, Mark; Casadonte, Rita


    Matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) imaging mass spectrometry (IMS) is an evolving technique in cancer diagnostics and combines the advantages of mass spectrometry (proteomics), detection of numerous molecules, and spatial resolution in histological tissue sections and cytological preparations. This method allows the detection of proteins, peptides, lipids, carbohydrates or glycoconjugates and small molecules.Formalin-fixed paraffin-embedded tissue can also be investigated by IMS, thus, this method seems to be an ideal tool for cancer diagnostics and biomarker discovery. It may add information to the identification of tumor margins and tumor heterogeneity. The technique allows tumor typing, especially identification of the tumor of origin in metastatic tissue, as well as grading and may provide prognostic information. IMS is a valuable method for the identification of biomarkers and can complement histology, immunohistology and molecular pathology in various fields of histopathological diagnostics, especially with regard to identification and grading of tumors.

  6. Recovery of valuable products in the raffinate of the uranium and thorium pilot-plant

    International Nuclear Information System (INIS)

    Jardim, E.A.; Abrao, A.


    IPEN-CNEN/SP has being very active in refining yellowcake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, tetra - and hexafluoride in a sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major to be worked is the raffinate from the solvent extraction colum where and thorium are purified via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid and ammonium nitrate. Distilled nitric acid and the final sulfuric acid as residue are recycle. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium - free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximize the recycle and reuse of the above mentioned chemicals. (author) [pt

  7. Professional regulation: a potentially valuable tool in responding to "stem cell tourism". (United States)

    Zarzeczny, Amy; Caulfield, Timothy; Ogbogu, Ubaka; Bell, Peter; Crooks, Valorie A; Kamenova, Kalina; Master, Zubin; Rachul, Christen; Snyder, Jeremy; Toews, Maeghan; Zoeller, Sonja


    The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet ("stem cell tourism") is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  8. Recovery of valuable products from the raffinate of uranium and thorium pilot-plant

    International Nuclear Information System (INIS)

    Martins, E.A.J.


    IPEN-CNEN/SP has being very active in refining yellow cake to pure ammonium diuranate which is converted to uranium trioxide, uranium dioxide, uranium tetra-and hexa-fluoride in sequential way. The technology of the thorium purification and its conversion to nuclear grade products has been a practice since several years as well. For both elements the major waste to be worked is the raffinate from purification via TBP-varsol in pulsed columns. In this paper the actual processing technology is reviewed with special emphasis on the recovery of valuable products, mainly nitric acid, ammonium nitrate, uranium, thorium and rare earth elements. Ammonium nitrate from the precipitation of uranium diuranate is of good quality, being radioactivity and uranium-free, and recommended to be applied as fertilizer. In conclusion the main effort is to maximize the recycle and reuse of the above mentioned chemicals. (author)

  9. Motivational interviewing: a valuable tool for the psychiatric advanced practice nurse. (United States)

    Karzenowski, Abby; Puskar, Kathy


    Motivational Interviewing (MI) is well known and respected by many health care professionals. Developed by Miller and Rollnick (2002) , it is a way to promote behavior change from within and resolve ambivalence. MI is individualized and is most commonly used in the psychiatric setting; it is a valuable tool for the Psychiatric Advanced Nurse Practice Nurse. There are many resources that talk about what MI is and the principles used to apply it. However, there is little information about how to incorporate MI into a clinical case. This article provides a summary of articles related to MI and discusses two case studies using MI and why advanced practice nurses should use MI with their patients.

  10. Industrial scale chromatographic separation of valuable compounds from biomass hydrolysates and side streams

    Energy Technology Data Exchange (ETDEWEB)

    Saari, P.


    Carbohydrates are composed of a number of various monosaccharides, glucose being the most abundant. Some of the monosaccharides are valuable compounds used in the food and pharmaceutical industries. They can be separated from biomass hydrolysates e.g. by chromatographic methods. In this thesis, chromatographic separation of valuable compounds using ion exchange resins was studied on an industrial scale. Of special interest were rare monosaccharides in biomass hydrolysates. A novel chromatographic separation process was developed for fucose, starting from pre-processed spent sulfite liquor. The core of the process consists of three chromatographic separations with different types of ion exchange resins. Chromatographic separation of galactose was tested with three biomass hydrolysates; lactose, gum arabic and hemicellulose hydrolysates. It was demonstrated that also galactose can be separated from complex carbohydrate mixtures. A recovery process for arabinose from citrus pectin liquid residual and for mannose from wood pulp hydrolysate were also developed and experimentally verified. In addition to monosaccharides, chromatographic separation of glycinebetaine from vinasse was examined with a hydrogen form weak acid cation exchange resin. The separation involves untypical peak formation depending, for example, on the pH and the cation composition. The retention mechanism was found to be hydrogen bonding between glycinebetaine and the resin. In the experimental part, all four resin types - strong acid cation, strong base anion, weak acid cation and weak base anion exchange resins - were used. In addition, adsorption equilibria data of seven monosaccharides and sucrose were measured with the resins in sodium and sulfate forms because such data have been lacking. It was found out that the isotherms of all sugars were linear under industrial conditions. A systematic method for conceptual process design and sequencing of chromatographic separation steps were developed

  11. Electronic theses and dissertations: a review of this valuable resource for nurse scholars worldwide. (United States)

    Goodfellow, L M


    A worldwide repository of electronic theses and dissertations (ETDs) could provide worldwide access to the most up-to-date research generated by masters and doctoral students. Until that international repository is established, it is possible to access some of these valuable knowledge resources. ETDs provide a technologically advanced medium with endless multimedia capabilities that far exceed the print and bound copies of theses and dissertations housed traditionally in individual university libraries. CURRENT USE: A growing trend exists for universities worldwide to require graduate students to submit theses or dissertations as electronic documents. However, nurse scholars underutilize ETDs, as evidenced by perusing bibliographic citation lists in many of the research journals. ETDs can be searched for and retrieved through several digital resources such as the Networked Digital Library of Theses and Dissertations (, ProQuest Dissertations and Theses (, the Australasian Digital Theses Program ( and through individual university web sites and online catalogues. An international repository of ETDs benefits the community of nurse scholars in many ways. The ability to access recent graduate students' research electronically from anywhere in the world is advantageous. For scholars residing in developing countries, access to these ETDs may prove to be even more valuable. In some cases, ETDs are not available for worldwide access and can only be accessed through the university library from which the student graduated. Public access to university library ETD collections is not always permitted. Nurse scholars from both developing and developed countries could benefit from ETDs.

  12. Energetical fly ashes – separation and utilization of metallic valuable components

    Directory of Open Access Journals (Sweden)

    Michalíková Františka


    Full Text Available In the contribution, methods of separating metals – Fe, Al, Ge from energetic wastes – fly ashes are presented along with further possibilities of utilization of particular valuable components for industrial purposes.In the contribution, properties of energetic wastes are presented influencing the contents, separability, and utilizability of metal-bearing valuable components. From among physical properties these are grain size distribution and surface area. Chemical properties are characterized by elements contained in combusted coal whose content after combustion is increased 2 to 4 times, depending on the content of ash and combustible matters in original coal. Mineralogical properties of energetic wastes are determined by the combustion process conditions in the course of which mineral novelties are produced in concentrations suitable for separation.In the contribution, methods of separation and utilization of metals such as Fe, Al, Ge are described. From literature information on the processing of Fe component, as well as from results of experiments made at the Department of Mineral Processing and Environmental Protection, Technical University of Kosice follows that the highest concentration and mass yield of the component can be obtained from black coal fly ashes produced in smelting boilers. The content of Al in Slovak energetic wastes is lower than the 30 % Al2O3 limit that conditions an economic technological processing. Only in the case of black coal fly ash from TEKO Kosice and EVO Vojany was the Al2O3 content of 32.93 %. Therefore, in an indirect way – by separating the residues of uncombusted coal and magnetite Fe – the content of Al in fly ash was increased.For Ge, a principle of selective sizing has been utilized.A complex utilization of energetic wastes, that is the separation of metallic components, elimination of particular metals and the subsequent treatment of nonmetallic residue, should be an effective solution in various

  13. Rice husk ash – A valuable reinforcement for high density polyethylene

    International Nuclear Information System (INIS)

    Ayswarya, E.P.; Vidya Francis, K.F.; Renju, V.S.; Thachil, Eby Thomas


    Highlights: ► RHA is formed from the incineration of rice husk. ► RHA is mainly a mixture of silica with various metallic compounds. ► RHA is a valuable reinforcing material for HDPE. ► RHA can be incorporated into HDPE by the melt blending process. ► The best mechanical properties are observed at 1.5% RHA and 15% compatibilizer. -- Abstract: This paper presents the results of a study on the use of rice husk ash (RHA) for property modification of high density polyethylene (HDPE). Rice husk is a waste product of the rice processing industry. It is used widely as a fuel which results in large quantities of RHA. Here, the characterization of RHA has been done with the help of X-ray diffraction (XRD), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), light scattering based particle size analysis, Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscope (SEM). Most reports suggest that RHA when blended directly with polymers without polar groups does not improve the properties of the polymer substantially. In this study RHA is blended with HDPE in the presence of a compatibilizer. The compatibilized HDPE-RHA blend has a tensile strength about 18% higher than that of virgin HDPE. The elongation-at-break is also higher for the compatibilized blend. TGA studies reveal that uncompatibilized as well as compatibilized HDPE-RHA composites have excellent thermal stability. The results prove that RHA is a valuable reinforcing material for HDPE and the environmental pollution arising from RHA can be eliminated in a profitable way by this technique.

  14. Spatial ecology and behavior of eastern box turtles on the hardwood ecosystem experiment: pre-treatment results (United States)

    Andrea F. Currylow; Brian J. MacGowan; Rod N. Williams


    To understand better how eastern box turtles (Terrapene carolina carolina) are affected by forest management practices, we monitored movements of box turtles prior to silvicultural treatments within the Hardwood Ecosystem Experiment (HEE) in Indiana. During 2007 and 2008, we tracked 23-28 turtles on six units of the HEE. Estimated minimum convex...

  15. Life Cycle Primary Energy and Carbon Analysis of Recovering Softwood Framing Lumber and Hardwood Flooring for Reuse (United States)

    Richard D. Bergman; Hongmei Gu; Thomas R. Napier; James Salazar; Robert H. Falk


    Recovering wood for reuse in a new house affects energy and greenhouse gas emissions. This paper finds the energy and emissions for recovering softwood framing lumber and hardwood flooring from an old house for installation in a new house. Recovering wood displaces primary production of new wood products and avoids the end-of-life (EOL) burdens for the old house. We...

  16. Nursery stock quality as an indicator of bottomland hardwood forest restoration success in the Lower Mississippi River Alluvial Valley (United States)

    Douglass F. Jacobs; Rosa C. Goodman; Emile S. Gardiner; K Frances Salifu; Ronald P. Overton; George Hernandez


    Seedling morphological quality standards are lacking for bottomland hardwood restoration plantings in the Lower Mississippi River Alluvial Valley, USA, which may contribute toward variable restoration success. We measured initial seedling morphology (shoot height, root collar diameter, number of first order lateral roots, fresh mass, and root volume), second year field...

  17. Ectomycorrhizal sporophore distributions in a southeastern Appalachian mixed hardwood/conifer forest with thickets of Rhododendron maximum (United States)

    John F. Walker; Orson R. Jr. Miller


    Sporophore abundance of putatively ectomycorrhizal fungi was compared in a mature mixed hardwood/conifer forest inside of (1) versus outside of (2) Rhododendron maximum thickets (RmT). Experimental blocks (1/4 ha) were established inside of (3) and outside of (3) RmT at the Coweeta Hydrologic Laboratory in Macon County, North Carolina, USA. Litter...

  18. Labeling Defects in CT Images of Hardwood Logs with Species-Dependent and Species-Independent Classifiers (United States)

    Pei Li; Jing He; A. Lynn Abbott; Daniel L. Schmoldt


    This paper analyses computed tomography (CT) images of hardwood logs, with the goal of locating internal defects. The ability to detect and identify defects automatically is a critical component of efficiency improvements for future sawmills and veneer mills. This paper describes an approach in which 1) histogram equalization is used during preprocessing to normalize...

  19. Forecasting Forest Type and Age Classes in the Appalachian-Cumberland Subregion of the Central Hardwood Region (United States)

    David N. Wear; Robert Huggett


    This chapter describes how forest type and age distributions might be expected to change in the Appalachian-Cumberland portions of the Central Hardwood Region over the next 50 years. Forecasting forest conditions requires accounting for a number of biophysical and socioeconomic dynamics within an internally consistent modeling framework. We used the US Forest...

  20. Effects of soil compaction on residual stand growth in central Appalachian hardwood forest: a preliminary case study (United States)

    Jingxin Wang; Chris LeDoux; Michael Vanderberg; Li Yaoxiang


    A preliminary study that quantified the impacts of soil compaction on residual tree growth associated with ground-based skidding traffic intensity and turn payload size was investigated in the central Appalachian hardwood forest. The field study was carried out on a 20-acre tract of the West Virginia University Research Forest. Skid trails were laid out in 170' -...

  1. Stand development and yields of Appalachian hardwood stands managed with single-tree selection for at least 30 years (United States)

    Neil I Lamson; H. Clay Smith; H. Clay Smith


    Appalachian hardwood stands in West Virginia were managed for 30 or more years using single-tree selection regeneration practices. Stand yield data suggest that current stand growth will provide economical harvest cuts for several future cutting cycles. This case study indicates that the single-tree selection practice has potential for landowners who want to maintain...

  2. Mapping upland hardwood site quality and productivity with GIS and FIA in the Blue Ridge of North Carolina (United States)

    Claudia A. Cotton; Stephen R. Prisley; Thomas R. Fox


    The forested ecosystems of the southern Appalachians are some of the most diverse in North America due to the variability in climate, soils, and geologic parent material coupled with the complex topography found throughout the region. These same characteristics cause stands of upland hardwoods to be extremely variable with regard to site quality and productivity. Site...

  3. Evaluation of site impacts associated with three silvicultural prescriptions in an upland hardwood stand in northern Alabama, USA (United States)

    Emily A. Carter; Robert B. Rummer; Bryce J. Stokes


    Soil disturbance patterns and associated changes in soil physical status were measured in a study that evaluated the implementation of three alternative management prescriptions in an upland hardwood stand in northern Alabama, USA. Management prescriptions applied in this study consisted of a clear-cut, strip cut, and deferment cut that were compared to a non-harvested...

  4. Extraction and estimation of the quantity of calcium oxalate crystals in the foliage of conifer and hardwood trees (United States)

    Rakesh Minocha; Bradley Chamberlain; Stephanie Long; Swathi A. Turlapati; Gloria. Quigley


    The main goal of this study was to develop a method for the extraction and indirect estimation of the quantity of calcium oxalate (CaOx) in the foliage of trees. Foliar tissue was collected from a single tree of each species (five conifers and five hardwoods) for comparison of extractions in different solvents using 10 replicates per species from the same pool of...

  5. Regeneration response to midstory control following long-term single tree selection management of Southern Appalachian hardwoods (United States)

    Jason R. Lewis; John W. Groninger; David L. Loftis


    Sustainability of the single tree selection system in the mixed hardwood forests of the southern Appalachians is compromised by insufficient recruitment of oak species. In 1986, portions of a stand at Bent Creek Experimental Forest that have been under single tree selection management since 1945 were subjected to a midstory herbicide treatment in an effort to improve...

  6. Tree shelters and other methods for reducing deer damage to hardwood regeneration in the eastern United States (United States)

    Gary W. Miller


    This report summarizes the basic silvicultural problems associated with regenerating commercial hardwood (broadleaf) species in the eastern United States and includes a review of current methods used to reduce the impact of deer browsing. The following topics are discussed: 1) the biological requirements and regeneration mechanism associated with several important tree...

  7. Causes and Remedies for Errors in International Forest Products Trade Data: Examples from the Hardwood Trade Statistics (United States)

    William G. Luppold; William G. Luppold


    The quality of data concerning international hardwood products trade declined in the 1980s because of several problems associated with the collection and processing of individual export transaction records. This note examines the source, impact, and remedies for data problems caused by data screening procedures, nonreporting, recording errors, and alternative...

  8. Successes and failures in controlling weeds in hardwood seedbeds at the Arkansas Forestry Commission Baucum Forest Nursery (United States)

    Allan Murray


    Fumigation with methyl bromide is essential in the production of hardwood seedlings in nurseries in the southern United States. However, the proposed rules under the 2008 U.S. Environmental Protection Agency (EPA) Risk Mitigation will further restrict the use of methyl bromide for nursery use.

  9. Sugar maple height-diameter and age-diameter relationships in an uneven-aged northern hardwood stand (United States)

    Laura S. Kenefic; R.D. Nyland


    Sugar maple (Acer saccharum Marsh.) height-diameter and age-diameter relationships are explored in a balanced uneven-aged northern hardwood stand in central New York. Results show that although both height and age vary considerably with diameter, these relationships can be described by statistically valid equations. The age-diameter relationship...

  10. An interactive machine-learning approach for defect detection in computed tomogaraphy (CT) images of hardwood logs (United States)

    Erol Sarigul; A. Lynn Abbott; Daniel L. Schmoldt; Philip A. Araman


    This paper describes recent progress in the analysis of computed tomography (CT) images of hardwood logs. The long-term goal of the work is to develop a system that is capable of autonomous (or semiautonomous) detection of internal defects, so that log breakdown decisions can be optimized based on defect locations. The problem is difficult because wood exhibits large...

  11. Quantifying structural and physiological controls on variation in canopy transpiration among planted pine and hardwood species in the southern Appalachians (United States)

    Chelcy R. Ford; Robert M. Hubbard; James M. Vose


    Recent studies have shown that planted pine stands exhibit higher evapotranspiration (ET) and are more sensitive to climatic conditions compared with hardwood stands. Whether this is due to management and stand effects, biological effects or their interaction is poorly understood. We estimated growing season canopy- and sap flux-scaled leaf-level transpiration (Ec and...

  12. Asian longhorned beetle (Coleoptera: Cerambycidae), an introduced pest of maple and other hardwood trees in North America and Europe (United States)

    P.S. Meng; K. Hoover; M.A. Keena


    The Asian longhorned beetle, Anoplophora glabripennis (Motschulsky), threatens urban and forest hardwood trees both where introduced and in parts of its native range. Native to Asia, this beetle has hitchhiked several times in infested wood packaging used in international trade, and has established breeding populations in five U.S. states, Canada,...

  13. Two-age silviculture: an innovative tool for enhancing species diversity and vertical structure in Appalachian hardwoods (United States)

    Gary W. Miller; Petra B. Wood; Jeffrey V. Nichols; Jeffrey V. Nichols


    Silvicultural practices that promote a two-age stand structure provide an opportunity to maintain diversity of woody species and vertical structure for extended periods of time in Appalachian hardwoods. Data from four two-age stands initiated by deferment cutting in West Virginia are summarized for the first 10 to 15 years after treatment. Results indicated that 15...

  14. Gate-to-Gate Life-Cycle Inventory on Hardwood Sawmills in the Northeastern Region of the United States (United States)

    Richard D. Bergman


    Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Certifying wood products as green building materials is vital for the long-term productivity of the wood building industry and for forest management. This study examined hardwood lumber...

  15. A Quantitative Assessment of the Structure and Functions of a Mature Bottomland Hardwood Community: The Iatt Creek Ecosystem Site (United States)

    Calvin E. Meier; John A. Stanturf; Emile S. Gardiner; Paul B. Hamel; Melvin L. Warren


    We report our efforts, initiated in 1995, to quantify ecological processes and functions in a relatively undisturbed, mature hardwood forest. The 320-ha site is located in central Louisiana on the upper reaches of Iatt Creek, an anastomosing minor stream bottom. The forest is a mature sweetgum (Liquidambar styraciflua L.)-cherrybark oak (

  16. Impact of a reduced winter snowpack on litter arthropod abundance and diversity in a northern hardwood forest ecosystem (United States)

    Pamela H. Templer; Andrew F. Schiller; Nathan W. Fuller; Anne M. Socci; John L. Campbell; John E. Drake; Thomas H. Kunz


    Projected changes in climate for the northeastern USA over the next 100 years include a reduction in the depth and duration of the winter snowpack, which could affect soil temperatures and frost regimes. We conducted a snow-removal experiment in a northern hardwood forest at the Hubbard Brook Experimental Forest in central New Hampshire over 2 years to induce soil...

  17. Date of shoot collection, genotype, and original shoot position affect early rooting of dormant hardwood cuttings of Populus (United States)

    R. S., Jr. Zalesny; A.H. Wiese


    Identifying superior combinations among date of dormant- season shoot collection, genotype, and original shoot position can increase the rooting potential of Populus cuttings. Thus, the objectives of our study were to: 1) evaluate variation among clones in early rooting from hardwood cuttings processed every three weeks from shoots collected...

  18. Host breadth and ovipositional behavior of adult Polydrusus sericeus and Phyllobius oblongus (Coleoptera: Curculionidae), nonindigenous inhabitants of northern hardwood forests (United States)

    R. A. Pinski; W. J. Mattson; K. F. Raffa


    Polydrusus sericeus (Schaller) and Phyllobius oblongus (L.) are nonindigenous root-feeding weevils in northern hardwood forests of Wisconsin and Michigan. Detailed studies of adult host range, tree species preferences, and effects of food source on fecundity and longevity have not been conducted in North America P....

  19. Improved prediction of hardwood tree biomass derived from wood density estimates and form factors for whole trees (United States)

    David W. MacFarlane; Neil R. Ver Planck


    Data from hardwood trees in Michigan were analyzed to investigate how differences in whole-tree form and wood density between trees of different stem diameter relate to residual error in standard-type biomass equations. The results suggested that whole-tree wood density, measured at breast height, explained a significant proportion of residual error in standard-type...

  20. Harvest-related edge effects on prey availability and foraging of hooded warblers in a bottomland hardwood forest (United States)

    John C. Kilgo


    The effects of harvest-created canopy gaps in bottomland hardwood forests on arthropod abundance and, hence, the foraging ecology of birds are poorly understood. I predicted that arthropod abundance would be high near edges of group-selection harvest gaps and lower in the surrounding forest, and that male Hooded Warblers (Wilsonia citrina) foraging...

  1. Evaluation of sampling methods to quantify abundance of hardwoods and snags within conifer-dominated riparian zones (United States)

    Theresa Marquardt; Hailemariam Temesgen; Paul D. Anderson; Bianca. Eskelson


    Six sampling alternatives were examined for their ability to quantify selected attributes of snags and hardwoods in conifer-dominated riparian areas of managed headwater forests in western Oregon. Each alternative was simulated 500 times at eight headwater forest locations based on a 0.52-ha square stem map. The alternatives were evaluated based on how well they...

  2. Promoting and maintaining diversity in contemporary hardwood forests: Confronting contemporary drivers of change and the loss of ecological memory (United States)

    Christopher R. Webster; Yvette L. Dickinson; Julia I. Burton; Lee E. Frelich; Michael A. Jenkins; Christel C. Kern; Patricia Raymond; Michael R. Saunders; Michael B. Walters; John L. Willis


    Declines in the diversity of herbaceous and woody plant species in the understory of eastern North American hardwood forests are increasingly common. Forest managers are tasked with maintaining and/or promoting species diversity and resilience; however, the success of these efforts depends on a robust understanding of past and future system dynamics and identification...

  3. Invasive earthworms deplete key soil inorganic nutrients (Ca, Mg, K, and P) in a northern hardwood forest (United States)

    Kit Resner; Kyungsoo Yoo; Stephen D. Sebestyen; Anthony Aufdenkampe; Cindy Hale; Amy Lyttle; Alex. Blum


    Hardwood forests of the Great Lakes Region have evolved without earthworms since the Last Glacial Maximum, but are now being invaded by exotic earthworms introduced through agriculture, fishing, and logging. These exotic earthworms are known to increase soil mixing, affect soil carbon storage, and dramatically alter soil morphology. Here we show, using an active...

  4. Logging damage to residual trees following commercial harvesting to different overstory retention levels in a mature hardwood stand in Tennessee (United States)

    Wayne K. Clatterbuck


    Partial cutting in mature hardwood stands often causes physical damage to residual stems through felling and skidding resulting in a decline in bole quality and subsequent loss of tree value. This study assessed the logging damage to residual trees following commercial harvesting in a fully stocked, mature oak-hickory stand cut to three overstory basal area retention...

  5. The vernal dam: Plant-microbe competition for nitrogen in northern hardwood forests

    International Nuclear Information System (INIS)

    Zak, D.R.; Groffman, P.M.; Pregitzer, K.S.; Tiedje, J.M.; Christensen, S.


    Nitrogen (N) uptake by spring ephemeral communities has been proposed as a mechanism that retains N within northern hardwood forests during the season of maximum loss. To understand better the importance of these plants in retaining N, the authors followed the movement of 15 NH 4 + and 15 NO 3 - into plant and microbial biomass. Two days following isotope addition, microbial biomass represented the largest labile pool of N and contained 8.5 times as much N as Allium tricoccum L. biomass. Microbial immobilization of 15 N was 10-20 times greater than uptake by A. tricoccum. Nitrification of 15 NH 4 + was five times lower in cores containing A. tricoccum compared to those without the spring ephemeral. Spring N retention within northern hardwood forests cannot be fully explained by plant uptake because microbial immobilization represented a significantly larger sink for N. Results suggest that plant and microbial uptake of NH 4 + may reduce the quantity of substrate available for nitrification and thereby lessen the potential for NO 3 - loss via denitrification and leaching

  6. Organic matter budget in a mixed-hardwood forest in north central Florida

    International Nuclear Information System (INIS)

    Lugo, A.E.; Gamble, J.F.; Ewel, K.C.


    Organic-matter flows through a mixed-hardwood forest were analyzed as part of a study of the unusual behavior of 137 Cs in Florida ecosystems. The data suggest that rates of organic-matter flow in the mixed-hardwood forest in north central Florida more closely approach those of similar systems in tropical areas than in temperate areas. Annual litterfall was 1069 g/m 2 ; litter turnover, 1.3/year; net daytime productivity of leaves and twigs, 12.4 g m -2 day -1 ; nighttime respiration, 5.1 g m -2 day -1 ; and stem respiration, 1.4 g m -2 day -1 . Constancy of litter storage (820 g/m 2 ) and leaf fall and lack of net wood deposition indicate that the forest is in steady state. It was concluded that 137 Cs accumulation in this forest is probably caused by intrinsic ecosystem processes, as previously suggested, rather than by buildup that might be expected in a successional ecosystem

  7. Results of a workshop concerning assessment of the functions of bottomland hardwoods (United States)

    Roelle, James E.; Auble, Gregor T.; Hamilton, David B.; Johnson, Richard L.; Segelquist, Charles A.


    The U.S. Environmental Protection Agency (EPA) is authorized under Section 404 of the Clean Water Act (33 U.S.C. 1344) to participate in the regulation of the discharge of dredged or fill material into waters of the United States. This regulatory authority is exercised in partnership with the U.S. Army Corps of Engineers, which has responsibility for permit issuance, and in consultation with the U.S. Fish and Wildlife Service and the National Marine Fisheries Service. Through amendments to the original statute, a series of legal actions and court decisions, and the development of operating guidance among the responsible agencies, Section 404 has evolved into the primary mechanism afforded Federal authorities for the protection of wetlands. EPA recognizes the importance of wetlands in achieving the goals of the Clean Water Act, which are to protect and maintain the chemical, physical, and biological integrity of the Nation’s waters. EPA Administrator Lee Thomas has identified wetlands protection as among the highest of Agency priorities. EPA recognizes that bottomland hardwood (BLH) wetlands have vital and unique attributes that, if lost, would severely impact the physical, chemical, and biological integrity of the Nation's waters. As part of a broad program to better protect the Nation's wetlands, EPA has therefore identified bottomland hardwood wetlands as a priority resource requiring special attention on a national basis.

  8. Biology and management of insect pests in North American intensively managed hardwood forest systems.

    Energy Technology Data Exchange (ETDEWEB)

    Coyle, David R.; Nebeker, T., E.; Hart, E., R.; Mattson, W., J.


    Annu. Rev. Entomol. 50:1-29. Abstract Increasing demand for wood and wood products is putting stress on traditional forest production areas, leading to long-term economic and environmental concerns. Intensively managed hardwood forest systems (IMHFS), grown using conventional agricultural as well as forestry methods, can help alleviate potential problems in natural forest production areas. Although IMHFS can produce more biomass per hectare per year than natural forests, the ecologically simplified, monocultural systems may greatly increase the crops susceptibility to pests. Species in the genera Populus and Salix comprise the greatest acreage in IMHFS in North America, but other species, including Liquidambar styracifua and Platanus occidentalis, are also important. We discuss life histories, realized and potential damage, and management options for the most economically infuential pests that affect these hardwood species. The substantial inherent challenges associated with pest management in the monocultural environments created by IMHFS are reviewed. Finally, we discuss ways to design IMHFS that may reduce their susceptibility to pests, increase their growth and productivity potential, and create a more sustainable environment.

  9. Relative abundance and species richness of cerambycid beetles in partial cut and uncut bottomland hardwood forests (United States)

    Newell, P.; King, S.


    Partial cutting techniques are increasingly advocated and used to create habitat for priority wildlife. However, partial cutting may or may not benefit species dependent on deadwood; harvesting can supplement coarse woody debris in the form of logging slash, but standing dead trees may be targeted for removal. We sampled cerambycid beetles during the spring and summer of 2006 and 2007 with canopy malaise traps in 1- and 2-year-old partial cut and uncut bottomland hardwood forests of Louisiana. We captured a total of 4195 cerambycid beetles representing 65 species. Relative abundance was higher in recent partial cuts than in uncut controls and with more dead trees in a plot. Total species richness and species composition were not different between treatments. The results suggest partial cuts with logging slash left on site increase the abundance of cerambycid beetles in the first few years after partial cutting and that both partial cuts and uncut forest should be included in the bottomland hardwood forest landscape.

  10. Assessment of the role of bottomland hardwoods in sediment and erosion control (United States)

    Molinas, A.; Auble, Gregor T.; Segelquist, C.A.; Ischinger, Lee S.


    Drainage and clearing of bottomland hardwoods have long been recognized by the U.S. Environmental Protection Agency (EPA) and the U.S. Fish and Wildlife Service (Service) as important impacts of Federal water projects in the lower Mississippi River Valley. More recently, the water quality impacts of such projects (e.g., increases in sediments, nutrients, and pesticides) have also become of concern. In 1984, in an effort to better define problems concerning wetland losses and water degradation, EPA initiated a cooperative project with the Western Energy and Land Use Team (now the National Ecology Research Center) of the Service. Three phases of the project were identified: 1. To collect existing literature and data; 2. To select, develop, and test the utility of methods to quantify the relationships between land use, cover types, soils, hydrology, and water quality (as represented by sediment); and 3. To apply selected methodologies to several sites within the Yazoo Basin of Mississippi to determine the, potential effectiveness of various management alternatives to reduce sediment yield, increase sediment deposition, and improve water quality. Methods development focused on linking a simulation of water and sediment movement to a computerized geographic information system. We had several objectives for the resulting model. We desired that it should: 1. Estimate the importance of bottomland and hardwoods as a cover type that performs the functions of erosion and sediment control, 2. Simulate effects of proportions of ' various cover types and their specific spatial configurations, 3. Be applicable to moderately large spatial areas with minimal site-specific calibration, 4. Simulate spatial patterns of sediment loss-gain over time, and 5. Represent both sediment detachment and transport. While it was recognized that impacts and management alternatives could be sorted roughly into landscape measures and channel measures, the decision was made to focus study efforts

  11. Cine MR CSF flow study in hydrocephalus: What are the valuable parmeters?

    International Nuclear Information System (INIS)

    Choi, Hye Young; Kim, Myung Hyun


    To evaluate the changes in diagnosis of intracranial cerebrospinal fluid (CSF) dynamics in the hydrocephalus, we studied the various parameters of cine phase contrast (PC) magnetic resonance (MR) CSF flow images in cases of acutely progressive hydrocephalus, comparing them with those in normal CSF circulation. The MR images were obtained with a 1.5T (GE Signa, GE Medical Systems, Milwaukee, USA) unit using the 2 dimensional cine PC sequence with peripheral gating and gradient recalled echo imaging in ten cases of non-obstructive hydrocephalus(NOH), three of obstructive hydrocephalus(OH), and ten controls. The time-echo time-flip angle employed were 50 to 80 msec-11 to 15 msec-12 to 15 degrees. Temporal velocity information relating to cervical pericord CSF spaces, third and fourth ventricles, and the aqueduct were plotted as wave forms which were then analyzed for configuration, amplitude parameters(Vmax, Vmin, Vdif), and temporal parameters(R-S, R-SMV, R-D, R-DMV). The statistical significance of each parameter was examined using the paired t-test. All patients with OH underwent endoscopic third ventriculostomy, whereas all with NOH underwent shunting procedures. In five ROIs, distinct reproducible configuration features were obtained at aqueduct and cervical pericord spaces, but not at ventricular levels. We determined the statistically significant differences between controls and hydrocephalus patients using temporal, rather than amplitude parameters. In NOH, the graph showed R-DMV shortening (p<0.01) at the anterior cervical pericord space. In OH, there were R-DMV shortening (p<0.05) was seen at the anterior cervical pericord space, and R-DMV shortening (p<0.02) at the posterior cervical pericord space. In one case of OH, a typical change of configuration, mirror image, was obtained at aqueduct level, and in all OH cases, the level of obstruction could be determined. The results of cine PC MR CSF flow study may be valuable for points for determining the level

  12. Point Counts of Birds in Bottomland Hardwood Forests of the Mississippi Alluvial Valley: Duration, Minimum Sample Size, and Points Versus Visits (United States)

    Winston Paul Smith; Daniel J. Twedt; David A. Wiedenfeld; Paul B. Hamel; Robert P. Ford; Robert J. Cooper


    To compare efficacy of point count sampling in bottomland hardwood forests, duration of point count, number of point counts, number of visits to each point during a breeding season, and minimum sample size are examined.

  13. Recovery of valuable metals from polymetallic mine tailings by natural microbial consortium. (United States)

    Vardanyan, Narine; Sevoyan, Garegin; Navasardyan, Taron; Vardanyan, Arevik


    Possibilities for the recovery of non-ferrous and precious metals from Kapan polymetallic mine tailings (Armenia) were studied. The aim of this paper was to study the possibilities of bioleaching of samples of concentrated tailings by the natural microbial consortium of drainage water. The extent of extraction of metals from the samples of concentrated tailings by natural microbial consortium reached 41-55% and 53-73% for copper and zinc, respectively. Metal leaching efficiencies of pure culture Leptospirillum ferrooxidans Teg were higher, namely 47-93% and 73-81% for copper and zinc, respectively. The content of gold in solid phase of tailings increased about 7-16% and 2-9% after bio-oxidation process by L. ferrooxidans Teg and natural microbial consortium, respectively. It was shown that bioleaching of the samples of tailings could be performed using the natural consortium of drainage water. However, to increase the intensity of the recovery of valuable metals, natural consortium of drainage water combined with iron-oxidizing L. ferrooxidans Teg has been proposed.

  14. Designing clinically valuable telehealth resources: processes to develop a community-based palliative care prototype. (United States)

    Tieman, Jennifer Joy; Morgan, Deidre Diane; Swetenham, Kate; To, Timothy Hong Man; Currow, David Christopher


    Changing population demography and patterns of disease are increasing demands on the health system. Telehealth is seen as providing a mechanism to support community-based care, thus reducing pressure on hospital services and supporting consumer preferences for care in the home. This study examined the processes involved in developing a prototype telehealth intervention to support palliative care patients involved with a palliative care service living in the community. The challenges and considerations in developing the palliative care telehealth prototype were reviewed against the Center for eHealth Research (CeHRes) framework, a telehealth development model. The project activities to develop the prototype were specifically mapped against the model's first four phases: multidisciplinary project management, contextual inquiry, value specification, and design. This project has been developed as part of the Telehealth in the Home: Aged and Palliative Care in South Australia initiative. Significant issues were identified and subsequently addressed during concept and prototype development. The CeHRes approach highlighted the implicit diversity in views and opinions among participants and stakeholders and enabled issues to be considered, resolved, and incorporated during design through continuous engagement. The CeHRes model provided a mechanism that facilitated "better" solutions in the development of the palliative care prototype by addressing the inherent but potentially unrecognized differences in values and beliefs of participants. This collaboration enabled greater interaction and exchange among participants resulting in a more useful and clinically valuable telehealth prototype.

  15. Leaching of valuable elements from thermal power plant bottom ash using a thermo-hydrometallurgical process. (United States)

    Bojinova, Darinka; Teodosieva, Ralitsa


    The solid industrial wastes generated from thermal power plants (TPPs) can be considered as renewable secondary sources for recovery of valuable metals. This study presents the results from investigations that integrated a thermo-hydro-metallurgical method for treatment of bottom ash obtained from the Enel Maritsa East 3 TPP in Bulgaria. Leaching was performed with 20, 30 and 40 wt% sulphuric acid, respectively, in an autoclave at 100(o)C, 120(o)C and 140(o)C for 120, 240, 360 and 480 min, at a constant value of the liquid/solid ratio. After autoclaving, the samples (suspensions) were diluted with a constant value of water and stirring at 50(o)C for 60 min. On the basis of the experimental data the leaching efficiency (α) of the elements in the liquid phase after filtration was estimated. The leaching of aluminium increases significantly with increasing of the temperature, reaching the maximum value of 70 wt%. The highest leaching efficiency values for the other elements are as follows: Fe (86.4%), Ca (86.6%), Na (86.6%), Ni (83.3%) and Zn (83.3%). The maximum value of leaching for Mg, K, Mn, Cu and Cr is in the interval of 46-70%. © The Author(s) 2016.

  16. The Marine Microalga, Heterosigma akashiwo, Converts Industrial Waste Gases into Valuable Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Jennifer J., E-mail: [College of Earth, Ocean, and Environment, University of Delaware, Lewes, DE (United States); Bianco, Colleen M. [Department of Microbiology, University of Illinois at Urbana-Champaign, Urbana, IL (United States); Miller, Katherine R. [Department of Chemistry, Salisbury University, Salisbury, MD (United States); Coyne, Kathryn J. [College of Earth, Ocean, and Environment, University of Delaware, Lewes, DE (United States)


    Heterosigma akashiwo is an excellent candidate for growth on industrial emissions since this alga has the ability to metabolize gaseous nitric oxide (NO) into cellular nitrogen via a novel chimeric protein (NR2-2/2HbN) and also tolerates wide fluctuations in temperature, salinity, and nutrient conditions. Here, we evaluated biomass productivity and composition, photosynthetic efficiency, and expression of NR2-2/2HbN for Heterosigma growing on simulated flue gas containing 12% CO{sub 2} and 150 ppm NO. Biomass productivity of Heterosigma more than doubled in flue gas conditions compared to controls, reflecting a 13-fold increase in carbohydrate and a 2-fold increase in protein productivity. Lipid productivity was not affected by flue gas and the valuable omega-3 fatty acids, eicosapentaenoic acid and docosahexaenoic acid, constituted up to 16% of total fatty acid methyl esters. Photochemical measurements indicated that photosynthesis in Heterosigma is not inhibited by high CO{sub 2} and NO concentrations, and increases in individual fatty acids in response to flue gas were driven by photosynthetic requirements. Growth rates and maximum cell densities of Heterosigma grown on simulated flue gas without supplemental nitrogen, along with a significant increase in NR2-2/2HbN transcript abundance in response to flue gas, demonstrated that nitrogen derived from NO gas is biologically available to support enhanced CO{sub 2} fixation. Together, these results illustrate the robustness of this alga for commercial-scale biomass production and bioremediation of industrial emissions.

  17. Line lessons: Enbridge's Northern Line provides valuable information

    Energy Technology Data Exchange (ETDEWEB)

    Ross, E.


    Experiences gained from the 14-year old Norman Wells crude oil pipeline in the Northwest Territories may provide operators with valuable insights in natural gas pipeline developments in northern Canada. The Norman Wells line is the first and only long-distance pipeline in North America buried in permafrost and has proven to be a veritable laboratory on pipeline behaviour in extremely cold climates which also happen to be discontinuous at the same time. The line was built by Enbridge with a 'limit state' design, i e. it was built to move within the permafrost within certain limits, the amount of movement depending upon the area in which the line was built. This technology, which is still cutting edge, allows the pipeline to react to the freeze-thaw cycle without being affected by the heaving and resettling. The knowledge gained from the Norman Wells Line has come in very useful in the more recent AltaGas Services project transporting natural gas from a nearby well into the the town of Inuvik. Enbridge also contributed to the development of various pipeline inspection tools such as the 'Geopig' which travels within the pipeline and can pinpoint the location of problems practically within a matter of inches, and the 'Rolligon' an amphibious vehicle with five-foot diameter rubber tires that displaces only two pounds per square inch, leaving barely a track as it travels along the right-of-way during times other than winter.


    Directory of Open Access Journals (Sweden)

    Ion SARBU


    Full Text Available News. The globalization process has been accelerated by the explosion of information technologies entering into the work of social, production and education enterprises. Thus, in terms of systemic approach, the company is not a production of goods or services tailored to market requirements, but is equally an information unit producing knowledge. Purpose. The fundamental feature of these processes is applied once that the primary element of information processing is generated always in the information system, the information processed and interpreted in its final form as a resource of the management system. Methods. The article exposed the theoretical and methodological organization of information system of market relations and the role of information as a valuable element of business processes. Results. In the modern knowledge-based economy, increasing information needs at all levels of economic units that generate the emergence of new information products, enhancement of the productive resource and service information and transporting it by modern computerized channels.Information as a productive resource and service as the raw material for creating an active instrument of scientific management and virtual education in Moldova.

  19. Heterozygous CDKL5 Knockout Female Mice Are a Valuable Animal Model for CDKL5 Disorder

    Directory of Open Access Journals (Sweden)

    Claudia Fuchs


    Full Text Available CDKL5 disorder is a severe neurodevelopmental disorder caused by mutations in the X-linked CDKL5 (cyclin-dependent kinase-like five gene. CDKL5 disorder primarily affects girls and is characterized by early-onset epileptic seizures, gross motor impairment, intellectual disability, and autistic features. Although all CDKL5 female patients are heterozygous, the most valid disease-related model, the heterozygous female Cdkl5 knockout (Cdkl5 +/− mouse, has been little characterized. The lack of detailed behavioral profiling of this model remains a crucial gap that must be addressed in order to advance preclinical studies. Here, we provide a behavioral and molecular characterization of heterozygous Cdkl5 +/− mice. We found that Cdkl5 +/− mice reliably recapitulate several aspects of CDKL5 disorder, including autistic-like behaviors, defects in motor coordination and memory performance, and breathing abnormalities. These defects are associated with neuroanatomical alterations, such as reduced dendritic arborization and spine density of hippocampal neurons. Interestingly, Cdkl5 +/− mice show age-related alterations in protein kinase B (AKT and extracellular signal-regulated kinase (ERK signaling, two crucial signaling pathways involved in many neurodevelopmental processes. In conclusion, our study provides a comprehensive overview of neurobehavioral phenotypes of heterozygous female Cdkl5 +/− mice and demonstrates that the heterozygous female might be a valuable animal model in preclinical studies on CDKL5 disorder.

  20. Enrichment of valuable elements from vanadium slag using superconducting HGMS technology

    Energy Technology Data Exchange (ETDEWEB)

    He, Sai; Yang, Chang Qiao; Li, Su Qin; Zhang, Chang Quan [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing (China)


    Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of Fe{sub 2}O{sub 3} in concentrate could be increased from 39.6% to 55.0% and V2O5 from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

  1. The cost of being valuable: predictors of extinction risk in marine invertebrates exploited as luxury seafood. (United States)

    Purcell, Steven W; Polidoro, Beth A; Hamel, Jean-François; Gamboa, Ruth U; Mercier, Annie


    Extinction risk has been linked to biological and anthropogenic variables. Prediction of extinction risk in valuable fauna may not follow mainstream drivers when species are exploited for international markets. We use results from an International Union for Conservation of Nature Red List assessment of extinction risk in all 377 known species of sea cucumber within the order Aspidochirotida, many of which are exploited worldwide as luxury seafood for Asian markets. Extinction risk was primarily driven by high market value, compounded by accessibility and familiarity (well known) in the marketplace. Extinction risk in marine animals often relates closely to body size and small geographical range but our study shows a clear exception. Conservation must not lose sight of common species, especially those of high value. Greater human population density and poorer economies in the geographical ranges of endangered species illustrate that anthropogenic variables can also predict extinction risks in marine animals. Local-level regulatory measures must prevent opportunistic exploitation of high-value species. Trade agreements, for example CITES, may aid conservation but will depend on international technical support to low-income tropical countries. The high proportion of data deficient species also stresses a need for research on the ecology and population demographics of unglamorous invertebrates.

  2. Undecylenic acid: a valuable and physiologically active renewable building block from castor oil. (United States)

    Van der Steen, Marijke; Stevens, Christian V


    A lot of attention is currently being paid to the transition to a biobased economy. In this movement, most efforts concentrate on the development of bioenergy applications including bioethanol, biodiesel, thermochemical conversion of biomass, and others. However, in the energy sector other nonbiomass alternatives are known, whereas no valuable alternatives are available when thinking about chemical building blocks. Therefore, it is also essential to develop new routes for the synthesis of bio-based chemicals and materials derived thereof. Such intermediates can originate either from plants or from animals. Castor oil is a non-edible oil extracted from the seeds of the castor bean plant Ricinus communis (Euphorbiaceae), which grows in tropical and subtropical areas. Globally, around one million tons of castor seeds are produced every year, the leading producing areas being India, PR China, and Brazil.2 10-Undecenoic acid or undecylenic acid is a fatty acid derived from castor oil that, owing to its bifunctional nature, has many possibilities to develop sustainable applications.

  3. Is staged external fixation a valuable strategy for war injuries to the limbs? (United States)

    Lerner, Alexander; Fodor, Lucian; Soudry, Michael


    High-energy weapons or blast injuries usually result in substantial tissue damage and are serious medical and public health problems. We report our experience with staged external fixation for war injuries to the extremities. Forty-seven patients with 64 high-energy limb fractures caused by war weapons were retrospectively reviewed. The fractures were associated with severe soft tissue damage. There were 14 Gustilo-Anderson Type IIIA fractures, 40 Type IIIB fractures, and 10 Type IIIC fractures. Soft tissue débridement followed by axial realignment of the fractured bones with immediate skeletal stabilization using the AO/ASIF unilateral tubular external fixator was performed on the day of admission. The primary tubular fixators were exchanged 5 to 7 days later for Ilizarov frames. Delayed primary closure, skin grafts, or flaps were used for soft tissue coverage. The mean followup was 40 months, and the Ilizarov/hybrid external fixator was the definitive treatment in all patients. Bone union was achieved at an average of 8 months in 58 (90.6%) fractures. Three patients had nonunions and one patient required an amputation. Two patients were lost to followup. Staged external fixation is a valuable strategy for treatment of war injuries to the extremities. Therapeutic study, Level IV. See the Guidelines for Authors for a complete description of levels of evidence.

  4. Potentials of raw and cooked walnuts (Tetracapidium conophorum) as sources of valuable nutrients for good health. (United States)

    Moyib, O K; Falegbe, O; Moyib, F R


    The present study estimated nutrient composition of walnuts before and after cooking with respect to its potential as valuable source of nutrients for daily intake. Walnut fruits were purchased from five different markets in Ijebu-Ode local government area and its environs. The fruits samples were divided into two portions, labelled R (for raw) and C (cooked). The C samples were cooked at 100 degrees C for 1 hr and allowed to cool to room temperature. The seeds of both C and R samples were ground and analyzed for proximate, macro and micro minerals using methods of Association of Official Chemists. The results obtained showed that both raw and cooked walnuts are rich in fat, iron (Fe), manganese (Mn), and copper (Cu) in amounts that are within daily recommended intake per 100 g of walnut seeds. They also contained appreciable levels of protein, phosphorus (P), calcium (Ca), and magnesium (Mg) but with low content of moisture (MC), carbohydrate, fiber, sodium (Na) and potassium (K). Boiling significantly affected the levels of protein, carbohydrate, ash, moisture content, fat, nitrogen, calcium, sodium, copper, zinc, phosphorus, potassium, manganese and iron The study reveals that walnut is nutritious due to its appreciable level of protein and presence of various essential and macro minerals. Its low content of sodium and potassium is beneficiary in hypertensive condition as snack. The study suggests future bio-fortification of walnut with zinc, which may bring about a co-increase in Ca and protein content.

  5. Optimized Jasmonic Acid Production by Lasiodiplodia theobromae Reveals Formation of Valuable Plant Secondary Metabolites.

    Directory of Open Access Journals (Sweden)

    Felipe Eng

    Full Text Available Jasmonic acid is a plant hormone that can be produced by the fungus Lasiodiplodia theobromae via submerged fermentation. From a biotechnological perspective jasmonic acid is a valuable feedstock as its derivatives serve as important ingredients in different cosmetic products and in the future it may be used for pharmaceutical applications. The objective of this work was to improve the production of jasmonic acid by L. theobromae strain 2334. We observed that jasmonic acid formation is dependent on the culture volume. Moreover, cultures grown in medium containing potassium nitrate as nitrogen source produced higher amounts of jasmonic acid than analogous cultures supplemented with ammonium nitrate. When cultivated under optimal conditions for jasmonic acid production, L. theobromae secreted several secondary metabolites known from plants into the medium. Among those we found 3-oxo-2-(pent-2-enyl-cyclopentane-1-butanoic acid (OPC-4 and hydroxy-jasmonic acid derivatives, respectively, suggesting that fungal jasmonate metabolism may involve similar reaction steps as that of plants. To characterize fungal growth and jasmonic acid-formation, we established a mathematical model describing both processes. This model may form the basis of industrial upscaling attempts. Importantly, it showed that jasmonic acid-formation is not associated to fungal growth. Therefore, this finding suggests that jasmonic acid, despite its enormous amount being produced upon fungal development, serves merely as secondary metabolite.

  6. The Marine Microalga, Heterosigma akashiwo, Converts Industrial Waste Gases into Valuable Biomass

    International Nuclear Information System (INIS)

    Stewart, Jennifer J.; Bianco, Colleen M.; Miller, Katherine R.; Coyne, Kathryn J.


    Heterosigma akashiwo is an excellent candidate for growth on industrial emissions since this alga has the ability to metabolize gaseous nitric oxide (NO) into cellular nitrogen via a novel chimeric protein (NR2-2/2HbN) and also tolerates wide fluctuations in temperature, salinity, and nutrient conditions. Here, we evaluated biomass productivity and composition, photosynthetic efficiency, and expression of NR2-2/2HbN for Heterosigma growing on simulated flue gas containing 12% CO 2 and 150 ppm NO. Biomass productivity of Heterosigma more than doubled in flue gas conditions compared to controls, reflecting a 13-fold increase in carbohydrate and a 2-fold increase in protein productivity. Lipid productivity was not affected by flue gas and the valuable omega-3 fatty acids, eicosapentaenoic acid and docosahexaenoic acid, constituted up to 16% of total fatty acid methyl esters. Photochemical measurements indicated that photosynthesis in Heterosigma is not inhibited by high CO 2 and NO concentrations, and increases in individual fatty acids in response to flue gas were driven by photosynthetic requirements. Growth rates and maximum cell densities of Heterosigma grown on simulated flue gas without supplemental nitrogen, along with a significant increase in NR2-2/2HbN transcript abundance in response to flue gas, demonstrated that nitrogen derived from NO gas is biologically available to support enhanced CO 2 fixation. Together, these results illustrate the robustness of this alga for commercial-scale biomass production and bioremediation of industrial emissions.

  7. Using Psychodynamic Interaction as a Valuable Source of Information in Social Research

    Directory of Open Access Journals (Sweden)

    Camilla Schmidt


    Full Text Available This article will address the issue of using understandings of psychodynamic interrelations as a means to grasp how social and cultural dynamics are processed individually and collectively in narratives. I apply the two theoretically distinct concepts of inter- and intrasubjectivity to gain insight into how social and cultural dynamics are processed as subjective experiences and reflected in the interrelational space created in narrative interviews with trainee social educators. By using a combination of interactionist theory and psychosocial theory in the analysis of an interview with a student of social education, I demonstrate how the often conflicting demands and expectations are being played out in the interrelational tension between the researcher (myself and the interviewee or narrator. In a confrontation with “inner” expectations and concerns regarding a future profession and one’s ability to cope, and the “outer” socially and culturally embedded discourses as they are played out in the objectives of self-development and education, the narrative about a forthcoming internship is filled with tension and contradiction. In this article I will demonstrate how such tensions and contradictions are valuable sources of information in understanding the process of becoming a social educator.

  8. Production of Valuables Organic Acids from Organic Wastes with Hydrothermal Treatment Process

    Directory of Open Access Journals (Sweden)

    Muhammad Faisal


    Full Text Available This article reports production of valuables organic acids from the hydrothermal treatment of representative organic wastes and compounds (i. e. domestic sludge, proteinaceous, cellulosic and plastic wastes with or without oxidant (H2O2. Organic acids such as acetic, formic, propionic, succinic and lactic acids were obtained in significant amounts. At 623 K (16.5 MPa, acetic acid of about 26 mg/g-dry waste fish entrails was obtained. This increased to 42 mg/g dry waste fish entrails in the presence of H2O2. Experiments on glucose to represent cellulosic wastes were also carried out, getting acetic acid of about 29 mg/g-glucose. The study was extended to terephthalic acid and glyceraldehyde, reaction intermediates of hydrothermal treatment of PET plastic wastes and glucose, respectively. Studies on temperature dependence of formation of organic acids showed thermal stability of acetic acid, whereas, formic acid decomposed readily under hydrothermal conditions. In general, results demonstrated that the presence of oxidants favored formation of organic acids with acetic acid being the major product. Keywords: hydrothermal treatment, organic acids, organic wastes, oxidant, supercritical water oxidation

  9. Converting environmental risks to benefits by using spent coffee grounds (SCG) as a valuable resource. (United States)

    Stylianou, Marinos; Agapiou, Agapios; Omirou, Michalis; Vyrides, Ioannis; Ioannides, Ioannis M; Maratheftis, Grivas; Fasoula, Dionysia


    Coffee is perhaps one of the most vital ingredients in humans' daily life in modern world. However, this causes the production of million tons of relevant wastes, i.e., plastic cups, aluminum capsules, coffee chaff (silver skin), and spent coffee grounds (SCG), all thrown untreated into landfills. It is estimated that 1 kg of instant coffee generates around 2 kg of wet SCG; a relatively unique organic waste stream, with little to no contamination, separated directly in the source by the coffee shops. The produced waste has been under researchers' microscope as a useful feedstock for a number of promising applications. SCG is considered a valuable, nutrients rich source of bioactive compounds (e.g., phenolics, flavonoids, carotenoids, lipids, chlorogenic and protocatechuic acid, melanoidins, diterpenes, xanthines, vitamin precursors, etc.) and a useful resource material in other processes (e.g., soil improver and compost, heavy metals absorbent, biochar, biodiesel, pellets, cosmetics, food, and deodorization products). This paper aims to provide a holistic approach for the SCG waste management, highlighting a series of processes and applications in environmental solutions, food industry, and agricultural sector. Thus, the latest developments and approaches of SCG waste management are reviewed and discussed.

  10. Application of high-resolution melting analysis for authenticity testing of valuable Dendrobium commercial products. (United States)

    Dong, Xiaoman; Jiang, Chao; Yuan, Yuan; Peng, Daiyin; Luo, Yuqin; Zhao, Yuyang; Huang, Luqi


    The accurate identification of botanical origin in commercial products is important to ensure food authenticity and safety for consumers. The Dendrobium species have long been commercialised as functional food supplements and herbal medicines in Asia. Three valuable Dendrobium species, namely Dendrobium officinale, D. huoshanense and D. moniliforme, are often mutually adulterated in trade products in pursuit of higher profit. In this paper, a rapid and reliable semi-quantitative method for identifying the botanical origin of Dendrobium products in terminal markets was developed using high-resolution melting (HRM) analysis with specific primer pairs to target the trnL-F region. The HRM analysis method detected amounts of D. moniliforme adulterants as low as 1% in D. huoshanense or D. officinale products. The results have demonstrated that HRM analysis is a fast and effective tool for the differentiation of these Dendrobium species both for their authenticity as well as for the semi-quantitative determination of the purity of their processed products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  11. Classification of public lands valuable for geothermal steam and associated geothermal resources

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, L.H.; Haigler, L.B.; Rioux, R.L.; White, D.E.; Muffler, L.J.P.; Wayland, R.G.


    The Organic Act of 1879 (43 USC 31) that established the US Geological Survey provided, among other things, for the classification of the public lands and for the examination of the geological structure, mineral resources, and products of the national domain. In order to provide uniform executive action in classifying public lands, standards for determining which lands are valuable for mineral resources, for example, leasable mineral lands, or for other products are prepared by the US Geological Survey. This report presents the classification standards for determining which Federal lands are classifiable as geothermal steam and associated geothermal resources lands under the Geothermal Steam Act of 1970 (84 Stat. 1566). The concept of a geothermal resouces province is established for classification of lands for the purpose of retention in Federal ownership of rights to geothermal resources upon disposal of Federal lands. A geothermal resources province is defined as an area in which higher than normal temperatures are likely to occur with depth and in which there is a resonable possiblity of finding reservoir rocks that will yield steam or heated fluids to wells. The determination of a known geothermal resources area is made after careful evaluation of the available geologic, geochemical, and geophysical data and any evidence derived from nearby discoveries, competitive interests, and other indicia. The initial classification required by the Geothermal Steam Act of 1970 is presented.

  12. Spectroscopy applied to feed additives of the European Union Reference Laboratory: a valuable tool for traceability. (United States)

    Omar, Jone; Slowikowski, Boleslaw; Boix, Ana; von Holst, Christoph


    Feed additives need to be authorised to be placed on the market according to Regulation (EU) No. 1831/2003. Next to laying down the procedural requirements, the regulation creates the European Union Reference Laboratory for Feed Additives (EURL-FA) and requires that applicants send samples to the EURL-FA. Once authorised, the characteristics of the marketed feed additives should correspond to those deposited in the sample bank of the EURL-FA. For this purpose, the submitted samples were subjected to near-infrared (NIR) and Raman spectroscopy for spectral characterisation. These techniques have the valuable potential of characterising the feed additives in a non-destructive manner without any complicated sample preparation. This paper describes the capability of spectroscopy for a rapid characterisation of products to establish whether specific authorisation criteria are met. This study is based on the analysis of feed additive samples from different categories and functional groups, namely products containing (1) selenium, (2) zinc and manganese, (3) vitamins and (4) essential oils such as oregano and thyme oil. The use of chemometrics turned out to be crucial, especially in cases where the differentiation of spectra by visual inspection was very difficult.

  13. Leaching capacity of metals-metalloids and recovery of valuable materials from waste LCDs. (United States)

    Savvilotidou, Vasiliki; Hahladakis, John N; Gidarakos, Evangelos


    The purpose of Directive 2012/19/EU which is related to WEEE (Waste Electrical and Electronic Equipment), also known as "e-waste", is to contribute to their sustainable production and consumption that would most possibly be achieved by their recovery, recycling and reuse. Under this perspective, the present study focused on the recovery of valuable materials, metals and metalloids from LCDs (Liquid Crystal Displays). Indium (In), arsenic (As) and stibium (Sb) were selected to be examined for their Leaching Capacity (R) from waste LCDs. Indium was selected mainly due to its rarity and preciousness, As due to its high toxicity and wide use in LCDs and Sb due to its recent application as arsenic's replacement to improve the optimal clarity of a LCD screen. The experimental procedure included disassembly of screens along with removal and recovery of polarizers via thermal shock, cutting, pulverization and digestion of the shredded material and finally leaching evaluation of the aforementioned elements. Leaching tests were conducted under various temperatures, using various solid:liquid (S/L) ratios and solvents (acid mixtures), to determine the optimal conditions for obtaining the maximum leaching capacities. The examined elements exhibited different leaching behaviors, mainly due to the considerable diversity in their inherent characteristic properties. Indium demonstrated the highest recovery percentages (approximately 60%), while the recovery of As and Sb was unsuccessful, obtaining poor leaching percentages (0.16% and 0.5%, respectively). Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Investigation of a valuable biochemical indicator as objective measurement in radiation treated cancer patients

    International Nuclear Information System (INIS)

    Horvath, M.; Rode, I.L.


    In the investigation of a valuable biochemical indicator in radiotherapy applied in the treatment of cancer patients, plasma hemoglobin, serum haptoglobin, total LDH enzyme and LDH isoenzyme distribution levels were measured. In immunological studies immunoproteins were determined quantitatively by immunodiffusion. Patients were irradiated generally by 2 Gy daily doses and measurements of the above factors were made weekly, during a radiation treatment for 4-6 weeks. In most of the cases examined, increase in hemoglobin and haptoglobin values were observed and the time-dependent curves of the changes showed a characteristic shape. The immunosuppressive effect of irradiation was found to be no universe phenomenon, as in some percentage of the cases an increase in the values of the immunoproteins was observed during radiation treatment, especially in grid-irradiation. Cancer patients treated by different type of radiation sources were compared. The effects of 200 kV X-ray, high-energy X-ray, electron and 60-Co-gamma radiation were evaluated and their effectivity compared. A trial was made to differentiate between type of radiation treatment in radiotherapy of cancer and to find the most promising method. (orig.) [de

  15. Regeneration of five commercially-valuable tree species after experimental logging in an Amazonian forest

    Directory of Open Access Journals (Sweden)

    Lima Albertina Pimentel


    Full Text Available This study investigated the regeneration variation of five commercially valuable tree species in relation to different intensities of felling in fourteen 4-ha plots in an area under experimental forest management. This experiment was carried out in a typical Amazonian tropical forest sample on "terra-firme," in Manaus (AM. Plots were logged 7 and 8 years (1987 and 1988, or 3 years (1993 before the study. All trees with height greater than 2 m, and diameter at breast height (DBH smaller than 10 cm were measured. Only Aniba hostmanniana, Ocotea aciphylla, Licaria pachycarpa, Eschweilera coriacea and Goupia glabra were sufficiently common for individual analyses. These species have high timber values in the local market. Eight years after logging, the species responded differently to logging intensities. The numbers of individuals of Goupia glabra and Aniba hostmanniana were positively related to the intensity of logging, while Ocotea aciphylla, Licaria pachycarpa, and Eschweilera coriacea showed no statistically significant response. In the most recently (1993 logged areas, Goupia glabra and Aniba hostmanniana had higher numbers of individuals than the control plots.

  16. What Clinical Information Is Valuable to Doctors Using Mobile Electronic Medical Records and When? (United States)

    Kim, Junetae; Lee, Yura; Lim, Sanghee; Kim, Jeong Hoon; Lee, Byungtae; Lee, Jae-Ho


    There has been a lack of understanding on what types of specific clinical information are most valuable for doctors to access through mobile-based electronic medical records (m-EMRs) and when they access such information. Furthermore, it has not been clearly discussed why the value of such information is high. The goal of this study was to investigate the types of clinical information that are most valuable to doctors to access through an m-EMR and when such information is accessed. Since 2010, an m-EMR has been used in a tertiary hospital in Seoul, South Korea. The usage logs of the m-EMR by doctors were gathered from March to December 2015. Descriptive analyses were conducted to explore the overall usage patterns of the m-EMR. To assess the value of the clinical information provided, the usage patterns of both the m-EMR and a hospital information system (HIS) were compared on an hourly basis. The peak usage times of the m-EMR were defined as continuous intervals having normalized usage values that are greater than 0.5. The usage logs were processed as an indicator representing specific clinical information using factor analysis. Random intercept logistic regression was used to explore the type of clinical information that is frequently accessed during the peak usage times. A total of 524,929 usage logs from 653 doctors (229 professors, 161 fellows, and 263 residents; mean age: 37.55 years; males: 415 [63.6%]) were analyzed. The highest average number of m-EMR usage logs (897) was by medical residents, whereas the lowest (292) was by surgical residents. The usage amount for three menus, namely inpatient list (47,096), lab results (38,508), and investigation list (25,336), accounted for 60.1% of the peak time usage. The HIS was used most frequently during regular hours (9:00 AM to 5:00 PM). The peak usage time of the m-EMR was early in the morning (6:00 AM to 10:00 AM), and the use of the m-EMR from early evening (5:00 PM) to midnight was higher than during regular

  17. Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Jasmin [Institute of Chemical Sciences, University of Peshawar, N.W.F.P. (Pakistan); Jan, M. Rasul [University of Malakand, Chakdara, N.W.F.P. (Pakistan); Mabood, Fazal [Department of Chemistry, University of Malakand, Chakdara, N.W.F.P. (Pakistan); Jabeen, Farah [Department of Chemistry, Sarhad University, N.W.F.P. (Pakistan)


    Recycling of waste polymers has become a necessity because huge piles of those polymers represent a threat to the environment. Used polymers are also a source of energy and valuable chemicals. Used low density polyethylenes (LDPE) were catalytically pyrolysed in a home assembled batch reactor under atmospheric pressure. For maximum conversion into chemicals which could be used for feedstock recovery optimum conditions like temperature, catalyst weight and reaction time were optimized. A wide range of acidic and basic catalysts like silica, calcium carbide, alumina, magnesium oxide, zinc oxide and homogeneous mixture of silica and alumina were tried for this purpose. Though CaC{sub 2} was better on the basis of reaction time, however the efficiency of conversion into liquid for SiO{sub 2} was found to be maximum at optimum conditions. These two catalysts could be picked up as suitable catalysts for catalytic pyrolysis of polyethylene. The results of the column separation using different solvents indicate that the oxide containing catalyst could be best suited for selective conversion into polar and aromatic products while CaC{sub 2} catalyst could be adopted for selective conversion into aliphatic products. The liquid product obtained from catalytic pyrolysis was also characterized by physical and chemical tests. Among the physical tests density, specific gravity, API gravity, viscosity, kinematic viscosity, aniline point, flash point, Watson characterization constant, freezing point, diesel index, refractive index, gross calorific value, Net calorific value and ASTM Distillation were determined according to IP and ASTM standard methods for fuel values. From the physical tests it was observed that the results for the liquid fractions are comparable with the standard results of physical tests for gasoline, kerosene and diesel fuel oil. From the Bromine water and KMnO{sub 4} tests it was observed that liquid obtained is a mixture of olefin and aromatic hydrocarbons

  18. Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Dongyang; Wang, Zhendong; Guo, Min [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083 (China); Zhang, Mei, E-mail: [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083 (China); Liu, Jingbo [The Department of Chemistry, Texas A and M University-Kingsville, Kingsville, TX 78363 (United States); The Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)


    Highlights: • Concept to convert waste to valuable product is carried out in this study. • An industrially feasible and cost-effective approach was developed and optimized. • Highly crystalline and well-defined zeolite was produced under moderate conditions. • The zeolite derived from the bauxite tailings displayed high ion exchange capacity. • Bauxite tailings have potential application in heavy metal ions adsorbent. - Abstract: Bauxite tailings are a major type of solid wastes generated in the flotation process. The waste by-products caused significant environmental impact. To lessen this hazardous effect from poisonous mine tailings, a feasible and cost-effective solution was conceived and implemented. Our approach focused on reutilization of the bauxite tailings by converting it to 4A zeolite for reuse in diverse applications. Three steps were involved in the bauxite conversion: wet-chemistry, alkali fusion, and crystallization to remove impurities and to prepare porous 4A zeolite. It was found that the cubic 4A zeolite was single phase, in high purity, with high crystallinity and well-defined structure. Importantly, the 4A zeolite displayed maximum calcium ion exchange capacity averaged at 296 mg CaCO{sub 3}/g, comparable to commercially-available zeolite (310 mg CaCO{sub 3}/g) exchange capacity. Base on the optimal synthesis condition, the reaction yield of zeolite 4A from bauxite tailings achieved to about 38.43%, hence, this study will provide a new paradigm for remediation of bauxite tailings, further mitigating the environmental and health care concerns, particularly in the mainland of PR China.

  19. Phytochemical Screening: Antioxidant and Antibacterial Properties of Potamogeton Species in Order to Obtain Valuable Feed Additives. (United States)

    Lupoae, Paul; Cristea, Victor; Borda, Daniela; Lupoae, Mariana; Gurau, Gabriela; Dinica, Rodica Mihaela


    The alcoholic extracts from three submerged perennial plants Potamogeton crispus L., P. pusillus L. and P. pectinatus L. were analyzed by gas chromatography-mass spectrometry coupled with solid phase microextraction (SPME-GC/MS) and by High Performance Liquid Chromatography (HPLC) and their volatile fingerprint and polyphenols composition was mutually compared. Twenty-nine chemical compounds were detected and identified in ethanolic and methanolic extracts; the highest abundance (over 5%) in descending order, was detected for 9,9-dimethyl-8,10- dioxapentacyclo (5,3,0(2,5) 0(3,5,)0 (3,6) decane (21.65%), phenol 2,6 bis (1,1 dimethyletyl) 4-1-methylpropil (20.8%), pentadecanoic acid (14.3%), 2-(5-chloro-2-Methoxyphenyl) pyrrole (8.66%), propanedioic (malonic) acid 2-(4-methylphenyl) sulfonyl ethylidene (5.77%), 2 hydroxy-3 tert butyl-5-isopropyl-6 methyl phenyl ketone (5.76%). The highest total polyphenols and flavonoids content was found in the methanolic extract of P. crispus (112.5±0.5 mg tannic acid/g dry extract; 64.2±1.2 mg quercitin/g dry extract). Antioxidant activities (2,2-difenil-1-picrilhidrazil, hydrogen peroxide and reducing power assays) of obtained extracts are comparable with the standard compounds, butylated hydroxytoluene, rutin and ascorbic acid. Antibacterial efficiency of methanolic extracts was notably demonstrated against Gram negative (Escherichia coli, Enterobacter hormaechei) and Gram positive bacteria (Enterococcus casseliflavus). The data reported for the first time for Romanian Potamogeton species, provides extensive support for the chemical investigations of these plants of the aquatic anthropogene ecosystems in order to obtain valuable bioadditives for animal feed and/or pharmaceutical/food industry.

  20. 3D-Printed specimens as a valuable tool in anatomy education: A pilot study. (United States)

    Garas, Monique; Vaccarezza, Mauro; Newland, George; McVay-Doornbusch, Kylie; Hasani, Jamila


    Three-dimensional (3D) printing is a modern technique of creating 3D-printed models that allows reproduction of human structures from MRI and CT scans via fusion of multiple layers of resin materials. To assess feasibility of this innovative resource as anatomy educational tool, we conducted a preliminary study on Curtin University undergraduate students to investigate the use of 3D models for anatomy learning as a main goal, to assess the effectiveness of different specimen types during the sessions and personally preferred anatomy learning tools among students as secondary aim. The study consisted of a pre-test, exposure to test (anatomical test) and post-test survey. During pre-test, all participants (both without prior experience and experienced groups) were given a brief introduction on laboratory safety and study procedure thus participants were exposed to 3D, wet and plastinated specimens of the heart, shoulder and thigh to identify the pinned structures (anatomical test). Then, participants were provided a post-test survey containing five questions. In total, 23 participants completed the anatomical test and post-test survey. A larger number of participants (85%) achieved right answers for 3D models compared to wet and plastinated materials, 74% of population selected 3D models as the most usable tool for identification of pinned structures and 45% chose 3D models as their preferred method of anatomy learning. This preliminary small-size study affirms the feasibility of 3D-printed models as a valuable asset in anatomy learning and shows their capability to be used adjacent to cadaveric materials and other widely used tools in anatomy education. Copyright © 2018 Elsevier GmbH. All rights reserved.

  1. Is Local Radiotherapy Still Valuable for Patients With Multiple Intrahepatic Hepatocellular Carcinomas?

    International Nuclear Information System (INIS)

    Koom, Woong Sub; Seong, Jinsil; Han, Kwang Hyub; Lee, Do Yun; Lee, Jong Tae


    Purpose: To investigate whether local radiotherapy (RT) is valuable for patients with multiple hepatocellular carcinomas (HCCs). Methods and Materials: From July 1992 to August 2006, 107 patients with unresectable HCC were treated with local RT after incomplete transcatheter arterial chemoembolization (TACE). The RT field included a main tumor with or without other tumor nodules, depending on the effectiveness of TACE. The median RT dose was 50.4Gy in conventional fractionation. Patients were categorized into four groups: Group 1, single tumor (39 patients); Group 2, multiple tumors within the RT field (25 patients); Group 3, controlled tumors out of the RT field (19 patients); and Group 4, tumors that remained viable out of the RT field (24 patients). Results: Group 1 showed the best survival rate (MST, 35 months; 2-year OS, 60%) and Group 4 the worst (MST, 5 months; 2-year OS, 16%). Group 2 and Group 3 showed similar survival (MST, 13 vs. 19 months; 2-year OS, 35% vs. 46%; p = 0.698). Significantly worse intrahepatic control in Group 4 was observed. The survival in Groups 2 and 3 (MST, 16 months) was significantly different from that in Group 4 (p = 0.004), and was marginally significant compared with that in Group 1 (p = 0.051). Conclusions: Local RT to the main tumor could be applicable in well-controlled intrahepatic tumors out of the RT field. Patients with viable intrahepatic tumors out of the RT field showed worse survival. In future clinical trials, these patients need to be excluded.

  2. Gasification biochar as a valuable by-product for carbon sequestration and soil amendment

    International Nuclear Information System (INIS)

    Hansen, Veronika; Müller-Stöver, Dorette; Ahrenfeldt, Jesper; Holm, Jens Kai; Henriksen, Ulrik Birk; Hauggaard-Nielsen, Henrik


    Thermal gasification of various biomass residues is a promising technology for combining bioenergy production with soil fertility management through the application of the resulting biochar as soil amendment. In this study, we investigated gasification biochar (GB) materials originating from two major global biomass fuels: straw gasification biochar (SGB) and wood gasification biochar (WGB), produced by a Low Temperature Circulating Fluidized Bed gasifier (LT-CFB) and a TwoStage gasifier, respectively, optimized for energy conversion. Stability of carbon in GB against microbial degradation was assessed in a short-term soil incubation study and compared to the traditional practice of direct incorporation of cereal straw. The GBs were chemically and physically characterized to evaluate their potential to improve soil quality parameters. After 110 days of incubation, about 3% of the added GB carbon was respired as CO 2 , compared to 80% of the straw carbon added. The stability of GB was also confirmed by low H/C and O/C atomic ratios with lowest values for WGB (H/C 0.12 and O/C 0.10). The soil application of GBs exhibited a liming effect increasing the soil pH from ca 8 to 9. Results from scanning electron microscopy and BET analyses showed high porosity and specific surface area of both GBs, indicating a high potential to increase important soil quality parameters such as soil structure, nutrient and water retention, especially for WGB. These results seem promising regarding the possibility to combine an efficient bioenergy production with various soil aspects such as carbon sequestration and soil quality improvements. - Highlights: • Biomass gasification can combine efficient bioenergy production with valuable biochar residuals for soil improvements. • The two investigated gasification biochars are recalcitrant indicating soil carbon sequestration potential. • Gasification biochars are potential soil improvers due to high specific surface area, liming effect

  3. Identification of Factors Determining Market Value of the Most Valuable Football Players

    Directory of Open Access Journals (Sweden)

    Sebastian Majewski


    Full Text Available Purpose: The problem of identifying the most important determinants of the market value of football players is quite well described in the literature. There are many works that try to identify these factors. Some of them are focused on variables to make a set complete and others are on models and methods. The aim of this article is to present the variables influencing the valuation and to build an econometric model valuing footballers playing on the forward position, taking into consideration the assumptions of the econometric modelling. Such an approach indicates managers as other sources for obtaining information. Methodology: Econometric models were used to verify the hypothesis formulated in this research. The database was created on the basis of variables presented on the website www.transfermarkt. de that presents the values of the most valuable football players in the world playing on the forward position. The Gretl program was used in the research. Findings: The literature review showed that there are many independent variables having an impact on the value of the player. There are also many different models used to valuate footballers’ performance rights. The results of estimation of models in the research indicated that such factors as Canadian classification points adjusted the market value of the team and dummy variables describing “goodwill” (only for the best players had an impact on the market value of footballers’ performance rights. Limitations/implications: Information about different factors having an impact on football players’ market value could support the investment decision process of football managers. Originality/value: The results were part of a study concerning economics of sport, particularly processes of management of football clubs and valuation of intangible assets.

  4. Neuro-critical care: a valuable placement during foundation and early neurosurgical training. (United States)

    Dyson, Edward W; Kolias, Angelos G; Burnstein, Rowan M; Hutchinson, Peter J A; Garnett, Matthew R; Menon, David K; Trivedi, Rikin A


    Neurosciences critical care units (NCCUs) present a unique opportunity to junior trainees in neurosurgery as well as foundation trainees looking to gain experience in the management of critically ill patients with neurological conditions. Placements in NCCUs are undertaken in the early years of neurosurgical training or during neurosciences themed foundation programmes. We sought to quantify the educational benefits of such placements from the trainee perspective. Thirty-two trainees who had undertaken placements at Foundation Year 2 (FY2) to Specialty Trainee Year 3 (ST3) level between August 2009 and April 2013 were invited to take part in an online questionnaire survey. Competence in individual skills was self-rated on a ranked scale from one (never observed) to five (performed unsupervised) both before and after the placement. Trainees were also asked a series of questions pertaining to their ability to manage common neurosurgical conditions, as well as the perceived educational rigour of their placement. Twenty-three responses were received. Eighteen responses were from FY2s and seven were from ST1-3 level trainees. Following their placements, 100% of respondents felt better equipped to deal with neurosurgical and neurological emergencies and cranial trauma. Most felt better equipped to manage hydrocephalus (95.7%), polytrauma patients (95.7%), spontaneous intracranial haemorrhage (91.3%) and spinal trauma (82.6%). Significant increases were seen in experience in all practical skills assessed. These included central venous catheterisation (p training programme as well as in the Foundation Programme. This supports the incorporation of a four- to six-month NCCU rotation in early years training as educationally valuable.

  5. Recovery of valuable metals from electroplating sludge with reducing additives via vitrification. (United States)

    Huang, Ruth; Huang, Kuo-Lin; Lin, Zih-Yi; Wang, Jian-Wen; Lin, Chitsan; Kuo, Yi-Ming


    In this study, vitrification was applied to treat Ni-Cu electroplating sludge. The sludge was mixed with additives (limestone:cullet = 4:6) and then heated to 1450 °C. The cooled product could be separated into slag and ingot. An atomic absorption spectrometer was used to determine the metal levels of specimens and toxicity characteristic leaching procedure (TCLP) tests, whereas the crystalline and surface characteristics were examined using quantitative X-ray diffraction (XRD) analysis and scanning electron microscopy, respectively. With a glassy structure, the slag was mainly composed of Ca, Si, and Mg. The TCLP results of slags met the Taiwan regulated standards, suggesting that slag can be used for recycling purposes. With the aid of additives, the crystalline phase of slag was transformed form CaMgSiO4 into CsSiO3. The ingots were mainly composed of Ni (563,000-693,800 mg/kg), Cu (79,900-87,400 mg/kg), and Fe (35,000-43,600 mg/kg) (target metals) due the gravity separation during vitrification. At appropriate additives/sludge ratios (>0.2), >95% of target metals gathered in the ingot as a recoverable form (Ni-Fe alloy). The high Ni level of slag suggests that the ingot can be used as the raw materials for smelters or the additives for steel making. Therefore, the vitrification approach of this study is a promising technology to recover valuable metals from Ni-Cu electroplating sludge. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Hemodynamic exercise testing. A valuable tool in the selection of cardiac transplantation candidates. (United States)

    Chomsky, D B; Lang, C C; Rayos, G H; Shyr, Y; Yeoh, T K; Pierson, R N; Davis, S F; Wilson, J R


    Peak exercise oxygen consumption (Vo2), a noninvasive index of peak exercise cardiac output (CO), is widely used to select candidates for heart transplantation. However, peak exercise Vo2 can be influenced by noncardiac factors such as deconditioning, motivation, or body composition and may yield misleading prognostic information. Direct measurement of the CO response to exercise may avoid this problem and more accurately predict prognosis. Hemodynamic and ventilatory responses to maximal treadmill exercise were measured in 185 ambulatory patients with chronic heart failure who had been referred for cardiac transplantation (mean left ventricular ejection fraction, 22 +/- 7%; mean peak Vo2, 12.9 +/- 3.0 mL. CO response to exercise was normal in 83 patients and reduced in 102. By univariate analysis, patients with normal CO responses had a better 1-year survival rate (95%) than did those with reduced CO responses (72%) (P 14 (88%) was not different from that of patients with peak Vo2 of 10 (89%) (P < .0001). By Cox regression analysis, exercise CO response was the strongest independent predictor of survival (risk ratio, 4.3), with peak Vo2 dichotomized at 10 mL. (risk ratio, 3.3) as the only other independent predictor. Patients with reduced CO responses and peak Vo2 of < or = 10 had an extremely poor 1-year survival rate (38%). Both CO response to exercise and peak exercise Vo2 provide valuable independent prognostic information in ambulatory patients with heart failure. These variables should be used in combination to select potential heart transplantation candidates.

  7. Smooth incidence maps give valuable insight into Q fever outbreaks in The Netherlands

    Directory of Open Access Journals (Sweden)

    Wim van der Hoek


    Full Text Available From 2007 through 2009, The Netherlands faced large outbreaks of human Q fever. Control measures focused primarily on dairy goat farms because these were implicated as the main source of infection for the surrounding population. However, in other countries, outbreaks have mainly been associated with non-dairy sheep and The Netherlands has many more sheep than goats. Therefore, a public discussion arose about the possible role of non-dairy (meat sheep in the outbreaks. To inform decision makers about the relative importance of different infection sources, we developed accurate and high-resolution incidence maps for detection of Q fever hot spots. In the high incidence area in the south of the country, full postal codes of notified Q fever patients with onset of illness in 2009, were georeferenced. Q fever cases (n = 1,740 were treated as a spatial point process. A 500 x 500 m grid was imposed over the area of interest. The number of cases and the population number were counted in each cell. The number of cases was modelled as an inhomogeneous Poisson process where the underlying incidence was estimated by 2-dimensional P-spline smoothing. Modelling of numbers of Q fever cases based on residential addresses and population size produced smooth incidence maps that clearly showed Q fever hotspots around infected dairy goat farms. No such increased incidence was noted around infected meat sheep farms. We conclude that smooth incidence maps of human notifications give valuable information about the Q fever epidemic and are a promising method to provide decision support for the control of other infectious diseases with an environmental source.

  8. Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application

    International Nuclear Information System (INIS)

    Ma, Dongyang; Wang, Zhendong; Guo, Min; Zhang, Mei; Liu, Jingbo


    Highlights: • Concept to convert waste to valuable product is carried out in this study. • An industrially feasible and cost-effective approach was developed and optimized. • Highly crystalline and well-defined zeolite was produced under moderate conditions. • The zeolite derived from the bauxite tailings displayed high ion exchange capacity. • Bauxite tailings have potential application in heavy metal ions adsorbent. - Abstract: Bauxite tailings are a major type of solid wastes generated in the flotation process. The waste by-products caused significant environmental impact. To lessen this hazardous effect from poisonous mine tailings, a feasible and cost-effective solution was conceived and implemented. Our approach focused on reutilization of the bauxite tailings by converting it to 4A zeolite for reuse in diverse applications. Three steps were involved in the bauxite conversion: wet-chemistry, alkali fusion, and crystallization to remove impurities and to prepare porous 4A zeolite. It was found that the cubic 4A zeolite was single phase, in high purity, with high crystallinity and well-defined structure. Importantly, the 4A zeolite displayed maximum calcium ion exchange capacity averaged at 296 mg CaCO 3 /g, comparable to commercially-available zeolite (310 mg CaCO 3 /g) exchange capacity. Base on the optimal synthesis condition, the reaction yield of zeolite 4A from bauxite tailings achieved to about 38.43%, hence, this study will provide a new paradigm for remediation of bauxite tailings, further mitigating the environmental and health care concerns, particularly in the mainland of PR China

  9. Cardiomyocyte H9c2 cells present a valuable alternative to fish lethal testing for azoxystrobin

    International Nuclear Information System (INIS)

    Rodrigues, Elsa T.; Pardal, Miguel Â.; Laizé, Vincent; Cancela, M. Leonor; Oliveira, Paulo J.; Serafim, Teresa L.


    The present study aims at identifying, among six mammalian and fish cell lines, a sensitive cell line whose in vitro median inhibitory concentration (IC_5_0) better matches the in vivo short-term Sparus aurata median lethal concentration (LC_5_0). IC_5_0_s and LC_5_0 were assessed after exposure to the widely used fungicide azoxystrobin (AZX). Statistical results were relevant for most cell lines after 48 h of AZX exposure, being H9c2 the most sensitive cells, as well as the ones which provided the best prediction of fish toxicity, with a LC_5_0_,_9_6_h/IC_5_0_,_4_8_h = 0.581. H9c2 cell proliferation upon 72 h of AZX exposure revealed a LC_5_0_,_9_6_h/IC_5_0_,_7_2_h = 0.998. Therefore, identical absolute sensitivities were attained for both in vitro and in vivo assays. To conclude, the H9c2 cell-based assay is reliable and represents a suitable ethical alternative to conventional fish assays for AZX, and could be used to get valuable insights into the toxic effects of other pesticides. - Highlights: • Fish toxicity data are still considered standard information in ecotoxicology. • Alternatives to animal testing have become an important topic of research. • Cell-based assays are currently a promising in vitro alternative. • Comparative studies to accelerate the validation of cell-based methods are required. • H9c2 cell line proved to produce in vitro reliable toxicity results for azoxystrobin. - The application of cell-based assays for environmental toxicity studies would greatly reduce the number of fish needed for toxicity testing without any loss of reliability.

  10. Ecophysiological behaviour of hardwood species in renaturalization processes of coniferous plantations [Campania

    International Nuclear Information System (INIS)

    Borghetti, M.; Saracino, A.; D'Alessandro, C.M.


    Coniferous plantations may play a nurse effect for natural regeneration of native hardwood species, which would otherwise be conditioned by intraspecific competition due to trees of the upper layers or be prevented by high radiation load of open environments. Regulation of canopy cover by means of thinning generates temporary or permanent variations of levels of irradiance in lower forest layers. These affect the capability of recruitment and establishment and the ecophysiological behaviour of natural regeneration. Here we present a review of the notions on effects of relative irradiance variations on ecophysiological behaviour of native tree species in lower layers of mesophile and meso-xerophile forests, giving some specific examples produced during the national project PRIN 2003 FOR BIO [it

  11. Production of furfural from waste aqueous hemicellulose solution of hardwood over ZSM-5 zeolite. (United States)

    Gao, Hongling; Liu, Haitang; Pang, Bo; Yu, Guang; Du, Jian; Zhang, Yuedong; Wang, Haisong; Mu, Xindong


    This study aimed to produce furfural from waste aqueous hemicellulose solution of a hardwood kraft-based dissolving pulp production processing in a green method. The maximum furfural yield of 82.4% and the xylose conversion of 96.8% were achieved at 463K, 1.0g ZSM-5, 1.05g NaCl and organic solvent-to-aqueous phase ratio of 30:15 (V/V) for 3h. The furfural yield was just 51.5% when the same concentration of pure xylose solution was used. Under the optimized condition, furfural yield was still up to 67.1% even after the fifth reused of catalyst. Catalyst recycling study showed that ZSM-5 has a certain stability and can be efficiently reused. Copyright © 2014 Elsevier Ltd. All rights reserved.


    Directory of Open Access Journals (Sweden)

    Ruxanda Bodîrlău

    Full Text Available Chemical modification of hardwood sawdust from ash-tree species was carried out with a solution of maleic anhydride in acetone. Wood polymers, lignin, and cellulose were isolated from the wood sawdust and modified by the same method. Samples were characterized by Fourier transform infrared spectroscopy (FTIR, providing evidence that maleic anhydride esterifies the free hydroxyl groups of the wood polymer components. Composites comprising chemically modified wood sawdust and wood polymers (cellulose, lignin-as variable weight percentages-, and poly (vinyl chloride were obtained and further characterized by using FTIR spectroscopy and scanning electron microscopy (SEM. The thermal behavior of composites was investigated by using the thermogravimetric analysis (TGA. In all cases, thermal properties were affected by fillers addition.

  13. Principal forest dieback episodes in northern hardwoods: development of numeric indices of areal extent and severity

    International Nuclear Information System (INIS)

    Auclair, A.D.; Eglington, P.D.; Minnemeyer, S.L.


    The incidence of forest dieback in the Northern Hardwoods biome of Canada and the United States was determined for period from 1910 to 1990. Information from annual forest service pathology inventories in the two countries and other published literature was coded to estimate yearly the severity and areal extent of dieback on white/yellow birch and sugar maple from 1910 to 1990. Principal dieback episodes occurred as distinct waves coincident with maturation of the forest population in each of six regions. These episodes endured an average of 11 years. It is hypothesized that, once forest populations are mature, they are susceptible to extreme stresses such as freezing and drought which serve to synchronize the onset and subsidence of major dieback episodes. 38 refs., 5 figs., 5 tabs

  14. Abundance of green tree frogs and insects in artificial canopy gaps in a bottomland hardwood forest.

    Energy Technology Data Exchange (ETDEWEB)

    Horn, Scott; Hanula, James L.; Ulyshen, Michael D.; Kilgo, John C.


    Horn, Scott, James L. Hanula, Michael D. Ulyshen, and John C. Kilgo. 2005. Abundance of green tree frogs and insects in artificial canopy gaps in a bottomland hardwood forest. Am. Midl. Nat. 153:321-326. Abstract: We found more green tree frogs (Hyla cinerea) in canopy gaps than in closed canopy forest. Of the 331 green tree frogs observed, 88% were in canopy gaps. Likewise, higher numbers and biomasses of insects were captured in the open gap habitat. Flies were the most commonly collected insect group accounting for 54% of the total capture. These data suggest that one reason green tree frogs were more abundant in canopy gaps was the increased availability of prey and that small canopy gaps provide early successional habitats that are beneficial to green tree frog populations.

  15. Research on the pyrolysis of hardwood in an entrained bed process development unit

    Energy Technology Data Exchange (ETDEWEB)

    Kovac, R.J.; Gorton, C.W.; Knight, J.A.; Newman, C.J.; O' Neil, D.J. (Georgia Inst. of Tech., Atlanta, GA (United States). Research Inst.)


    An atmospheric flash pyrolysis process, the Georgia Tech Entrained Flow Pyrolysis Process, for the production of liquid biofuels from oak hardwood is described. The development of the process began with bench-scale studies and a conceptual design in the 1978--1981 timeframe. Its development and successful demonstration through research on the pyrolysis of hardwood in an entrained bed process development unit (PDU), in the period of 1982--1989, is presented. Oil yields (dry basis) up to 60% were achieved in the 1.5 ton-per-day PDU, far exceeding the initial target/forecast of 40% oil yields. Experimental data, based on over forty runs under steady-state conditions, supported by material and energy balances of near-100% closures, have been used to establish a process model which indicates that oil yields well in excess of 60% (dry basis) can be achieved in a commercial reactor. Experimental results demonstrate a gross product thermal efficiency of 94% and a net product thermal efficiency of 72% or more; the highest values yet achieved with a large-scale biomass liquefaction process. A conceptual manufacturing process and an economic analysis for liquid biofuel production at 60% oil yield from a 200-TPD commercial plant is reported. The plant appears to be profitable at contemporary fuel costs of $21/barrel oil-equivalent. Total capital investment is estimated at under $2.5 million. A rate-of-return on investment of 39.4% and a pay-out period of 2.1 years has been estimated. The manufacturing cost of the combustible pyrolysis oil is $2.70 per gigajoule. 20 figs., 87 tabs.

  16. Nitrogen biogeochemistry in the Adirondack Mountains of New York: hardwood ecosystems and associated surface waters

    International Nuclear Information System (INIS)

    Mitchell, Myron J.; Driscoll, Charles T.; Inamdar, Shreeram; McGee, Greg G.; Mbila, Monday O.; Raynal, Dudley J.


    Factors that regulate the fate of atmospherically deposited nitrogen to hardwood forests and subsequent transport to surface waters in the Adirondack region of New York are described. - Studies on the nitrogen (N) biogeochemistry in Adirondack northern hardwood ecosystems were summarized. Specific focus was placed on results at the Huntington Forest (HFS), Pancake-Hall Creek (PHC), Woods Lake (WL), Ampersand (AMO), Catlin Lake (CLO) and Hennessy Mountain (HM). Nitrogen deposition generally decreased from west to east in the Adirondacks, and there have been no marked temporal changes in N deposition from 1978 through 1998. Second-growth western sites (WL, PHC) had higher soil solution NO 3 - concentrations and fluxes than the HFS site in the central Adirondacks. Of the two old-growth sites (AMO and CLO), AMO had substantially higher NO 3 - concentrations due to the relative dominance of sugar maple that produced litter with high N mineralization and nitrification rates. The importance of vegetation in affecting N losses was also shown for N-fixing alders in wetlands. The Adirondack Manipulation and Modeling Project (AMMP) included separate experimental N additions of (NH 4 ) 2 SO 4 at WL, PHC and HFS and HNO 3 at WL and HFS. Patterns of N loss varied with site and form of N addition and most of the N input was retained. For 16 lake/watersheds no consistent changes in NO 3 - concentrations were found from 1982 to 1997. Simulations suggested that marked NO 3 - loss will only be manifested over extended periods. Studies at the Arbutus Watershed provided information on the role of biogeochemical and hydrological factors in affecting the spatial and temporal patterns of NO 3 - concentrations. The heterogeneous topography in the Adirondacks has generated diverse landscape features and patterns of connectivity that are especially important in regulating the temporal and spatial patterns of NO 3 - concentrations in surface waters

  17. The importance of hydrology in restoration of bottomland hardwood wetland functions (United States)

    Hunter, R.G.; Faulkner, S.P.; Gibson, K.A.


    Bottomland hardwood (BLH) forests have important biogeochemical functions and it is well known that certain structural components, including pulsed hydrology, hydric soils, and hydrophytic vegetation, enhance these functions. It is unclear, however, how functions of restored BLH wetlands compare to mature, undisturbed wetlands. We measured a suite of structural and functional attributes in replicated natural BLH wetlands (NAT), restored BLH wetlands with hydrology re-established (RWH), and restored BLH wetlands without hydrology re-established (RWOH) in this study. Trees were replanted in all restored wetlands at least four years prior to the study and those wetlands with hydrology re-established had flashboard risers placed in drainage ditches to allow seasonal surface flooding. Vegetation, soils, and selected biogeochemical functions were characterized at each site. There was a marked difference in woody vegetation among the wetlands that was due primarily to site age. There was also a difference in herbaceous vegetation among the restored sites that may have been related to differences in age or hydrology. Water table fluctuations of the RWH wetlands were comparable to those of the NAT wetlands. Thus, placing flashboard risers in existing drainage ditches, along with proper management, can produce a hydroperiod that is similar to that of a relatively undisturbed BLH. Average length of saturation within the upper 15 cm of soils was 37, 104, and 97 days for RWOH, RWH, and NAT, respectively. Soil moisture, denitrification potential, and soluble organic carbon concentrations differed among wetland sites, but soil carbon and nitrogen concentrations, heterotrophic microbial activity, and readily mineralizable carbon concentrations did not. Significant linear relationships were also found between soil moisture and heterotrophic microbial activity, readily mineralizable carbon, and soluble organic carbon. In addition, sedimentation rates were higher in NAT and RWH

  18. Study of root tensile strength of softwood and hardwood tree species: Implications for slope stability (United States)

    Esmaiili, Marzieh; Abdi, Ehsan; Jafary, Mohammad; Majnounian, Baris


    Landslides are known as one of the major natural hazards and often incurring economics and human life losses. The role of tree roots in slope stability is very important, especially when human lives and infrastructure are at risk. The anchorage of roots and improvement of slope stability mainly depend on specific properties of root network systems, such as tensile strength. These properties of the roots which govern the degree of reinforcement are different among tree species. Although, many studies have been conducted about plant biotechnical properties of species, yet there is lack of knowledge on comparing root systems of softwood and hardwood tree species for similar site conditions. Therefore this study was conducted to assess the tensile strength of the root system of Picea abies (softwood species) and Fraxinus excelsior (hardwood species) planted on two forested hillslopes. To this aim, single root specimens were sampled for each species and their tensile strength were then measured in laboratory using a computer controlled Instron Universal Testing Machine. According to the results root tensile strength tends to decrease with diameter according to a power law for both species. Based on analysis of covariance (ANCOVA), a significant difference has been observed in the tensile strength between the two studied species. Also the results showed that the value of mean root tensile strength for Picea abies (19.31 ± 2.64 MPa) was much more than that of Fraxinus excelsior (16.98 ± 1.01 MPa) within all root diameter classes. The data presented in this study may expand the knowledge of biotechnical properties of Picea abies and Fraxinus excelsior, as biomaterial for soil bioengineering.

  19. A Forest Tent Caterpillar Outbreak Increased Resource Levels and Seedling Growth in a Northern Hardwood Forest.

    Directory of Open Access Journals (Sweden)

    Danaë M A Rozendaal

    Full Text Available In closed-canopy forests, gap formation and closure are thought to be major drivers of forest dynamics. Crown defoliation by insects, however, may also influence understory resource levels and thus forest dynamics. We evaluate the effect of a forest tent caterpillar outbreak on understory light availability, soil nutrient levels and tree seedling height growth in six sites with contrasting levels of canopy defoliation in a hardwood forest in northern lower Michigan. We compared resource levels and seedling growth of six hardwood species before, during and in the three years after the outbreak (2008-2012. Canopy openness increased strongly during the forest tent caterpillar outbreak in the four moderately and severely defoliated sites, but not in lightly defoliated sites. Total inorganic soil nitrogen concentrations increased in response to the outbreak in moderately and severely defoliated sites. The increase in total inorganic soil nitrogen was driven by a strong increase in soil nitrate, and tended to become stronger with increasing site defoliation. Seedling height growth increased for all species in the moderately and severely defoliated sites, but not in lightly defoliated sites, either during the outbreak year or in the year after the outbreak. Growth increases did not become stronger with increasing site defoliation, but were strongest in a moderately defoliated site with high soil nutrient levels. Growth increases tended to be strongest for the shade intolerant species Fraxinus americana and Prunus serotina, and the shade tolerant species Ostrya virginiana. The strong growth response of F. americana and P. serotina suggests that recurring forest tent caterpillar outbreaks may facilitate the persistence of shade intolerant species in the understory in the absence of canopy gaps. Overall, our results suggest that recurrent canopy defoliation resulting from cyclical forest insect outbreaks may be an additional driver of dynamics in

  20. A Forest Tent Caterpillar Outbreak Increased Resource Levels and Seedling Growth in a Northern Hardwood Forest. (United States)

    Rozendaal, Danaë M A; Kobe, Richard K


    In closed-canopy forests, gap formation and closure are thought to be major drivers of forest dynamics. Crown defoliation by insects, however, may also influence understory resource levels and thus forest dynamics. We evaluate the effect of a forest tent caterpillar outbreak on understory light availability, soil nutrient levels and tree seedling height growth in six sites with contrasting levels of canopy defoliation in a hardwood forest in northern lower Michigan. We compared resource levels and seedling growth of six hardwood species before, during and in the three years after the outbreak (2008-2012). Canopy openness increased strongly during the forest tent caterpillar outbreak in the four moderately and severely defoliated sites, but not in lightly defoliated sites. Total inorganic soil nitrogen concentrations increased in response to the outbreak in moderately and severely defoliated sites. The increase in total inorganic soil nitrogen was driven by a strong increase in soil nitrate, and tended to become stronger with increasing site defoliation. Seedling height growth increased for all species in the moderately and severely defoliated sites, but not in lightly defoliated sites, either during the outbreak year or in the year after the outbreak. Growth increases did not become stronger with increasing site defoliation, but were strongest in a moderately defoliated site with high soil nutrient levels. Growth increases tended to be strongest for the shade intolerant species Fraxinus americana and Prunus serotina, and the shade tolerant species Ostrya virginiana. The strong growth response of F. americana and P. serotina suggests that recurring forest tent caterpillar outbreaks may facilitate the persistence of shade intolerant species in the understory in the absence of canopy gaps. Overall, our results suggest that recurrent canopy defoliation resulting from cyclical forest insect outbreaks may be an additional driver of dynamics in temperate closed

  1. Anatomy and lignin distribution in reaction phloem fibres of several Japanese hardwoods. (United States)

    Nakagawa, Kaori; Yoshinaga, Arata; Takabe, Keiji


    Although tension wood formation and the structure of gelatinous fibres (G-fibres) have been widely investigated, studies of the influence of the reaction phenomenon on phloem fibres have been few and incomplete in comparison with those of xylem wood fibres. This study was undertaken to clarify the influence of stem inclination on phloem fibres using several Japanese hardwood species that produce different G-fibre types in tension wood. Eight hardwood species were inclined at 30-45° at the beginning of April. Specimens were collected in July and December. The cell-wall structure and lignin distribution of phloem fibres on both the tension and opposite sides were compared by light microscopy, ultraviolet microscopy, confocal laser scanning microscopy after staining with acriflavine, and transmission electron microscopy after staining with potassium permanganate. Three types of changes were found in tension-side phloem fibres: (1) increases in the proportion of the syringyl unit in lignin in the S(1) and S(2) layers and compound middle lamella (Cercidiphyllum japonicum), (2) formation of unlignified gelatinous layers (Melia azedarach and Acer rufinerve) and (3) increases in the number of layers (n) in the multi-layered structure of S(1) + S(2) + n (G + L) (Mallotus japonicus). Other species showed no obvious change in cell-wall structure or lignin distribution. Phloem fibres of the tree species examined in our study showed three types of changes in lignin distribution and cell-wall structure. The reaction phenomenon may vary with tree species and may not be closely related to G-fibre type in tension wood.

  2. Morphoanatomical and physicochemical profile of Piper callosum: valuable assessment for its quality control

    Directory of Open Access Journals (Sweden)

    Rolf J.F. Silva

    Full Text Available ABSTRACT Piper callosum Ruiz & Pav., Piperaceae, popularly known as “elixir-paregórico” and “matricá” in Brazil, is used in folk medicine to treat gonorrhea, general pain, and digestive disorders, and has repellent, astringent, diuretic, depurative, and haemostatic properties. Despite the fact that this plant is sold as a traditional phytotherapeutic product, we did not find reports on its quality control. We, therefore, performed macroscopic, microscopic, histochemical, and physicochemical analyses using standard methods to establish botanical authentication and purity degree parameters for leaves and stem of this species in two forms: medicinal plant and herbal drug. We observed the size, shape, color, texture, fracture surface and transection characteristics, leaf venation patterns, and calluses are valuable diagnostic characters to identify the herbal drugs when they are not ground or powdered. Since medicinal plants and herbal drugs did not differ anatomically, the following key anatomical characters for P. callosum can be used for diagnostic purposes of both types raw plant materials: epicuticular wax and cuticular flanges patterns; collenchyma features; fibers in the midrib; arrangement pattern of the vascular bundles of the midrib and petiole; shape of the midrib, leaf margin, petiole, and stem; occurrence of raphides; and morphology of the starch grains. Acid lipids, essential oils, oleoresins, steroids, tannins and flavonoids were histochemically identified. Total ash (leaves: 11.25%; stem: 5.25%, sulphated ash (leaves: 68.02%; stem: 12.50%, acid-insoluble ash (leaves: 2.82%; stem: 0.27%, moisture (leaves: 8.60%; stem: 6.10%, loss on drying (leaves: 11.08%; stem: 8.58%, and pH (leaves: 5.57, stem: 5.28 values were determined. The order of analyzed metal levels in leaf and stem herbal drugs was Al > V > Cu > Mn > Cr > Ni. Similar levels of Cd and Co and low levels of Hg were found. The results obtained can be used as quality

  3. Ab Interno Trabeculectomy With the Trabectome as a Valuable Therapeutic Option for Failed Filtering Blebs. (United States)

    Wecker, Thomas; Neuburger, Matthias; Bryniok, Laura; Bruder, Kathrin; Luebke, Jan; Anton, Alexandra; Jordan, Jens F


    . The number of necessary IOP lowering medication drops at first, but seems to reach preoperative values after 20 months of follow-up. Trabectome surgery should be considered as a valuable escape procedure for patients with failed filtering blebs and uncontrolled IOP.

  4. Cheese whey valorisation: Production of valuable gaseous and liquid chemicals from lactose by aqueous phase reforming

    International Nuclear Information System (INIS)

    Remón, J.; Ruiz, J.; Oliva, M.; García, L.; Arauzo, J.


    Highlights: • Aqueous phase reforming: a promising strategy for cheese whey valorisation. • In-depth understanding of the effect of the operating conditions on the process. • Process optimisation for the selective production of valuable gas and liquid products. • High P, T, lactose concentration and spatial time favour gas production. • High T, low spatial time and the use of diluted solutions maximise liquids production. - Abstract: Cheese effluent management has become an important issue owing to its high biochemical oxygen demand and chemical oxygen demand values. Given this scenario, this work addresses the valorisation of lactose (the largest organic constituent of this waste) by aqueous phase reforming, analysing the influence of the most important operating variables (temperature, pressure, lactose concentration and mass of catalyst/lactose mass flow rate ratio) as well as optimising the process for the production of either gaseous or liquid value-added chemicals. The carbon converted into gas, liquid and solid products varied as follows: 5–41%, 33–97% and 0–59%, respectively. The gas phase was made up of a mixture of H_2 (8–58 vol.%), CO_2 (33–85 vol.%), CO (0–15 vol.%) and CH_4 (0–14 vol.%). The liquid phase consisted of a mixture of aldehydes: 0–11%, carboxylic acids: 0–22%, monohydric alcohols: 0–23%, polyhydric-alcohols: 0–48%, C3-ketones: 4–100%, C4-ketones: 0–18%, cyclic-ketones: 0–15% and furans: 0–85%. H_2 production is favoured at high pressure, elevated temperature, employing a high amount of catalyst and a concentrated lactose solution. Liquid production is preferential using diluted lactose solutions. At high pressure, the production of C3-ketones is preferential using a high temperature and a low amount of catalyst, while a medium temperature and a high amount of catalyst favours the production of furans. The production of alcohols is preferential using medium temperature and pressure and a low amount of

  5. GBEP pilot Ghana. Very valuable and successful - a follow-up is suggested. Conclusions and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Hanekamp, E.; Vissers, P.; De Lint, S. [Partners for Innovation, Amsterdam (Netherlands)


    The Global Bio-Energy Partnership (GBEP) has developed a set of 24 sustainability indicators applicable to all forms of bio-energy and aimed at voluntary use by national governments. The GBEP indicators enable governments to assess the bio-energy sector and to develop new policies related to sustainable bio-energy production and use. These indicators have been piloted in Ghana. Modern bio-energy is a big opportunity for the region, which is why NL Agency adopted and supported the pilot, together with the Global Bio-Energy Partnership (GBEP). The pilot project also was supported by the ECOWAS Regional Centre for Renewable Energy and Energy Efficiency (ECREEE) and has been coordinated by the Council for Scientific and Industrial Research (CSIR). The Ghana Energy Commission took the responsibility to involve policymakers. Partners for Innovation was commissioned by NL Agency to provide technical assistance for the pilot. The main aims of the project are: (a) Enhancing the capacity of the host country Ghana (and ECOWAS) to use the GBEP indicators as a tool for assessing the sustainability of its bio-energy sector and/or developing sustainable bio-energy policies; (b) Learning lessons on how to apply the indicators and how to enhance their practicality as a tool for policymakers and giving this as feedback to the GBEP community. Three Ghanaian research institutes (CSIR-FORIG, CSIR-IIR and UG-ISSER) have studied 11 out of the 24 GBEP indicators in the pilot. The pilot has been a success: the 24 sustainability criteria appear to be very valuable for Ghana. As such the indicators provide, also for other governments, a practical tool to assess sustainability of biomass sectors and policies. The report also shows important insights on data availability and quality, and on the applicability of the GBEP indicators in Ghana. The final report provides concrete recommendations on: (1) How Ghana can proceed with the GBEP sustainability indicators; and (2) The lessons learned for

  6. Abundance and Size Distribution of Cavity Trees in Second-Growth and Old-Growth Central Hardwood Forests (United States)

    Zhaofei Fan; Stephen R. Shifley; Martin A. Spetich; Frank R. Thompson III; David R. Larsen


    In central hardwood forests, mean cavity-tree abundance increases with increasing standsize class (seedling/sapling, pole, sawtimber, old-growth). However, within a size class, the number of cavity trees is highly variable among 0.1-ha inventory plots. Plots in young stands are most likely to have no cavity trees, but some plots may have more than 50 cavity trees/ha....

  7. Segregating the Effects of Seed Traits and Common Ancestry of Hardwood Trees on Eastern Gray Squirrel Foraging Decisions. (United States)

    Sundaram, Mekala; Willoughby, Janna R; Lichti, Nathanael I; Steele, Michael A; Swihart, Robert K


    The evolution of specific seed traits in scatter-hoarded tree species often has been attributed to granivore foraging behavior. However, the degree to which foraging investments and seed traits correlate with phylogenetic relationships among trees remains unexplored. We presented seeds of 23 different hardwood tree species (families Betulaceae, Fagaceae, Juglandaceae) to eastern gray squirrels (Sciurus carolinensis), and measured the time and distance travelled by squirrels that consumed or cached each seed. We estimated 11 physical and chemical seed traits for each species, and the phylogenetic relationships between the 23 hardwood trees. Variance partitioning revealed that considerable variation in foraging investment was attributable to seed traits alone (27-73%), and combined effects of seed traits and phylogeny of hardwood trees (5-55%). A phylogenetic PCA (pPCA) on seed traits and tree phylogeny resulted in 2 "global" axes of traits that were phylogenetically autocorrelated at the family and genus level and a third "local" axis in which traits were not phylogenetically autocorrelated. Collectively, these axes explained 30-76% of the variation in squirrel foraging investments. The first global pPCA axis, which produced large scores for seed species with thin shells, low lipid and high carbohydrate content, was negatively related to time to consume and cache seeds and travel distance to cache. The second global pPCA axis, which produced large scores for seeds with high protein, low tannin and low dormancy levels, was an important predictor of consumption time only. The local pPCA axis primarily reflected kernel mass. Although it explained only 12% of the variation in trait space and was not autocorrelated among phylogenetic clades, the local axis was related to all four squirrel foraging investments. Squirrel foraging behaviors are influenced by a combination of phylogenetically conserved and more evolutionarily labile seed traits that is consistent with a weak

  8. Abundance and size distribution of cavity trees in second-growth and old-growth central hardwood forests (United States)

    Zhaofei Fan; Stephen R. Shifley; Martin A. Spetich; Frank R. Thompson; David R. Larsen


    In central hardwood forests, mean cavity-tree abundance increases with increasing standsize class (seedling/sapling, pole, sawtimber, old-growth). However, within a size class, the number of cavity trees is highly variable among 0.1-ha inventory plots. Plots in young stands are most likely to have no cavity trees, but some plots may have more than 50 cavity trees/ha....

  9. The response of ground beetles (Coleoptera: Carabidae) to selection cutting in a South Carolina bottomland hardwood forest (United States)

    Michael D. Ulyshen; James L. Hanula; Scott Horn; John C. Kilgo; Christopher E. Moorman


    We compared the response of ground beetles (Coleoptera: Carabidae) to the creation of canopy gaps of different size (0.13, 0.26, and 0.50 ha) and age (1 and 7 years) in a bottomland hardwood forest (South Carolina, USA). Samples were collected four times in 2001 by malaise and pitfall traps placed at the center and edge of each gap, and 50 m into the surrounding forest...

  10. A Computer Vision System for Automated Grading of Rough Hardwood Lumber Using a Knowledge-Based Approach (United States)

    Tai-Hoon Cho; Richard W. Conners; Philip A. Araman


    A sawmill cuts logs into lumber and sells this lumber to secondary remanufacturers. The price a sawmiller can charge for a volume of lumber depends on its grade. For a number of species the price of a given volume of material can double in going from one grade to the next higher grade. Thus, accurately establishing the grade of a volume of hardwood lumber is very...

  11. Amenability of Acacia and Eucalyptus Hardwood Pulps to Elemental Chlorine-Free Bleaching: Application and Efficacy of Microbial Xylanase

    Directory of Open Access Journals (Sweden)

    Avdhesh Kumar Gangwar


    Full Text Available This study outlines the results of a biobleaching study of acacia (A. mangium and eucalyptus (E. globulus hardwood kraft pulps with commercial xylanase (Optimase CX 72 L. The comparative study was carried out using an elemental chlorine-free (ECF bleaching sequence (D0EPD1D2 after the enzyme (X stage. The enzyme treatment resulted in improved optical properties with a reduction in bleach chemical consumption. At an equivalent bleach chemical consumption, a brightness gain of 2.1 and 1.7 units and a whiteness gain of 2.7 and 2.3 units were observed with xylanase treatment in acacia and eucalyptus pulps, respectively. In ECF bleaching using the D0EPD1D2 sequence, a final brightness was achieved to the extent of 90% ISO and 89% ISO for acacia and eucalyptus, respectively, at an equivalent charge of bleach chemicals. The post-color (PC number was also reduced by up to 45% for both hardwood pulps compared with the control. The bleachability of acacia was observed to be significantly higher than that of eucalyptus. In addition, a 17.0% and 23.0% reduction in chlorine dioxide and sodium hydroxide, respectively, were obtained for both hardwood pulps after xylanase pre-bleaching, thus indicating an environmentally friendly approach to the process.

  12. Using Local Architecture as an Historical Resource: Some Teaching Strategies (United States)

    Taylor, Catherine; And Others


    Architecture can be a topic in high school community studies. A program in Boulder, Colorado, is described as a case study. Learning activities include walking tours, library and city archive research, and slide shows. Tips for teachers and an annotated bibliography are included. (Author/DB)

  13. Operational restoration of the Pen Branch bottomland hardwood and swamp wetlands - the research setting

    International Nuclear Information System (INIS)

    Nelson, E.A.


    The Savannah River Swamp is a 3020 Ha forested wetland on the floodplain of the Savannah River and is located on the Department of Energy's Savannah River Site (SRS) near Aiken, SC. Historically the swamp consisted of approximately 50 percent bald cypress-water tupelo stands, 40 percent mixed bottomland hardwood stands, and 10 percent shrub, marsh, and open water. Creek corridors were typical of Southeastern bottomland hardwood forests. The hydrology was controlled by flooding of the Savannah River and by flow from four creeks that drain into the swamp prior to flow into the Savannah River. Upstream dams have caused some alteration of the water levels and timing of flooding within the floodplain. Major impacts to the swamp hydrology occurred with the completion of the production reactors and one coal-fired powerhouse at the SRS in the early 1950's. Water was pumped from the Savannah River, through secondary heat exchangers of the reactors, and discharged into three of the tributary streams that flow into the swamp. Flow in one of the tributaries, Pen Branch, was typically 0.3 m3 s-1 (10-20) cfs prior to reactor pumping and 11.0 m3 s-1 (400 cfs) during pumping. This continued from 1954 to 1988 at various levels. The sustained increases in water volume resulted in overflow of the original stream banks and the creation of additional floodplains. Accompanying this was considerable erosion of the original stream corridor and deposition of a deep silt layer on the newly formed delta. Heated water was discharged directly into Pen Branch and water temperature in the stream often exceeded 65 degrees C. The nearly continuous flooding of the swamp, the thermal load of the water, and the heavy silting resulted in complete mortality of the original vegetation in large areas of the floodplain. In the years since pumping was reduced, early succession has begun in some affected areas. Most of this has been herbs, grasses, and shrubs. Areas that have seedlings are generally willow

  14. Teores de carboidratos em estacas lenhosas de mirtileiro Carbohidrates content in hardwood cuttings of blueberry

    Directory of Open Access Journals (Sweden)

    Rérinton Joabél Pires de Oliveira


    Full Text Available O objetivo do trabalho foi avaliar as alterações no teor de carboidratos em estacas lenhosas de mirtileiro das cultivares Delite, Powder Blue e Seleção 19. O trabalho foi dividido em dois experimentos, primeiramente foram analisados os teores de amido e de açúcares solúveis a partir de ramos coletados em quatro épocas (03-06, 04-07, 24-07 e 11-08-2008 e, posteriormente, avaliou-se o teor de carboidratos em estacas coletadas nas mesmas épocas citadas, porém submetidas ao enraizamento e avaliadas em diferentes épocas (03-06, 04-07, 04-08, 03-09 e 03-10; 04-07, 04-08, 03-09, 03-10; 24-07, 04-08, 03-09 e 03-10; 11-08, 03-09 e 03-10. Verificou-se que a cultivar Powder Blue tem maior concentração de amido nos ramos que as cultivares Delite e Seleção 19. Estacas lenhosas de mirtileiro com baixos teores de amido, quando submetidas ao enraizamento, apresentam ressíntese de amido. No fim do período de inverno, ocorre aumento na concentração de amido nos ramos lenhosos de mirtileiro. Este aumento ao final do período de inverno está associado à maior taxa de enraizamento.The aim at this study was to evaluate the alterations on carbohydrates metabolism of hardwood cuttings of blueberries cv. Delite, Powder Blue and Seleção 19. The starch and soluble sugars concentration were evaluated in blueberry branches at four different times in a first experiment (06/03, 07/04, 07/24 and 08/11/2008 and later the metabolism of carbohydrates were evaluated in harvested hardwood cuttings submitted to rooting conditions (06/03, 07/04, 08/04, 09/03 and 10/03; 07/04, 08/04, 09/03 and 10/03; 07/24, 08/04, 09/03 and 10/03; 08/11, 09/03 and 10/03. It was verified that the cv. Powder Blue has higher starch concentration in the branches than Delite and Seleção 19. Hardwood cuttings of blueberry with low percentage of starch, when subjected to rooting, have resynthesis of starch. At the end of the winter, there is an increase in starch in the branches of

  15. Trust as a valuable strategic variable in the food industry: different types of trust and their implementation

    NARCIS (Netherlands)

    Lindgreen, A.


    Although it is often suggested that trust is an important construct in relationship marketing, there is only little empirical evidence of how, if at all, trust may be used as a valuable strategic variable. In the 1990s, the international food industry faced a number of serious challenges, most

  16. Degs and degu operon from Bacillus-brevis: a combination that enhances the production of commercially valuable enzymes

    CSIR Research Space (South Africa)

    Louw, M


    Full Text Available A novel method has been developed for increasing the production of commercially valuable enzymes, such as proteases, beta-glucanases, alpha-amylases and levansucrase. It is dependent on two genes cloned from Bacillus brevis, expressed on a multicopy...

  17. Developing a Topographic Model to Predict the Northern Hardwood Forest Type within Carolina Northern Flying Squirrel (Glaucomys sabrinus coloratus Recovery Areas of the Southern Appalachians

    Directory of Open Access Journals (Sweden)

    Andrew Evans


    Full Text Available The northern hardwood forest type is an important habitat component for the endangered Carolina northern flying squirrel (CNFS; Glaucomys sabrinus coloratus for den sites and corridor habitats between boreo-montane conifer patches foraging areas. Our study related terrain data to presence of northern hardwood forest type in the recovery areas of CNFS in the southern Appalachian Mountains of western North Carolina, eastern Tennessee, and southwestern Virginia. We recorded overstory species composition and terrain variables at 338 points, to construct a robust, spatially predictive model. Terrain variables analyzed included elevation, aspect, slope gradient, site curvature, and topographic exposure. We used an information-theoretic approach to assess seven models based on associations noted in existing literature as well as an inclusive global model. Our results indicate that, on a regional scale, elevation, aspect, and topographic exposure index (TEI are significant predictors of the presence of the northern hardwood forest type in the southern Appalachians. Our elevation + TEI model was the best approximating model (the lowest AICc score for predicting northern hardwood forest type correctly classifying approximately 78% of our sample points. We then used these data to create region-wide predictive maps of the distribution of the northern hardwood forest type within CNFS recovery areas.

  18. Environmental Factors that Influence Physiological Functioning of Eight Bottomland Hardwood Species (United States)

    Kassahun, Z.; Renninger, H. J.


    With increases in extreme precipitation, flooding, and prolonged drought events in the southeastern United States, bottomland hardwood forests are expected to experience a drastic shift in their productivity and composition. As environmental conditions shift, certain tree species may experience an increase in productivity or could be more negatively affected over more resilient species, leading to a shift in species composition, water use, and carbon uptake. The goals of this research were to use sap flow measurements, leaf phenology, and photosynthetic rates to study species-specific responses to environmental drivers. Sap flow of eight co-occurring hardwood species as well as soil moisture and vapor pressure deficit were measured continuously over the course of a calendar year that included drought conditions and extended saturated soil conditions. We found that cherrybark oak used the most water during the growing season, about 20% more water than the next highest consumer, swamp chestnut oak. Given low, ample or saturated soil moisture conditions, we found that sap flow of winged elm, American elm, cherrybark oak, and shagbark hickory exhibited varying relationships with vapor pressure deficit under the different soil moisture conditions. While the relationship between sap flow and vapor pressure deficit did not differ depending on soil moisture in willow oak, swamp chestnut oak, and green ash. This suggests that winged elm, American elm, cherrybark oak, and shagbark hickory may be more negatively affected by drought conditions while willow oak, swamp chestnut oak, and green ash are more drought tolerant. Regarding leaf phenology, willow oak, cherrybark oak, and shagbark hickory were the first to experience leaf abscission at the end of the growing season when extended drought conditions occurred. In terms of leaf gas exchange, green ash exhibited the highest photosynthesis and transpiration rates, resulting in the lowest water-use efficiency compared with

  19. Herbivorous insect response to group selection cutting in a southeastern bottomland hardwood forest.

    Energy Technology Data Exchange (ETDEWEB)

    Michael D. Ulyshen; James L. Hanula; Scott Horn; Christopher E. Moorman.


    ABSTRACT Malaise and pitfall traps were used to sample herbivorous insects in canopy gaps created by group-selection cutting in a bottomland hardwood forest in South Carolina. The traps were placed at the centers, edges, and in the forest adjacent to gaps of different sizes (0.13, 0.26, and 0.50 ha) and ages (1 and 7 yr old) during four sampling periods in 2001. Overall, the abundance and species richness of insect herbivores were greater at the centers of young gaps than at the edge of young gaps or in the forest surrounding young gaps. There were no differences in abundance or species richness among old gap locations (i.e., centers, edges, and forest), and we collected significantly more insects in young gaps than old gaps. The insect communities in old gaps were more similar to the forests surrounding them than young gap communities were to their respective forest locations, but the insect communities in the two forests locations (surrounding young and old gaps) had the highest percent similarity of all. Although both abundance and richness increased in the centers of young gaps with increasing gap size, these differences were not significant.Weattribute the increased numbers of herbivorous insects to the greater abundance of herbaceous plants available in young gaps.

  20. Sorption of chlorophenols from aqueous solution by granular activated carbon, filter coal, pine and hardwood. (United States)

    Hossain, G S M; McLaughlan, R G


    Wood and coal, as low-cost sorbents, have been evaluated as an alternative to commercial granular activated carbon (GAC) for chlorophenol removal. Kinetic experiments indicated that filter coal had a significantly lower rate of uptake (approximately 10% of final uptake was achieved after three hours) than the other sorbents, owing to intra-particle diffusion limitations. The data fitted a pseudo-second-order model. Sorption capacity data showed that GAC had a high sorption capacity (294-467 mg g(-1)) compared with other sorbents (3.2-7.5 mg(g-1)). However, wood and coal had a greater sorption capacity per unit surface area than GAC. Sorption equilibrium data was best predicted using a Freundlich adsorption model. The sorption capacity for all sorbents was 2-chlorophenol coal than the other sorbents. The results showed that pine, hardwood and filter coal can be used as sorbent materials for the removal of chlorophenol from water; however, kinetic considerations may limit the application of filter coal.