75 FR 24774 - Fairmount Bank, Baltimore, MD; Approval of Conversion Application

Science.gov (United States)

2010-05-05

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-36 OTS Nos. 08193 and H4677] Fairmount Bank, Baltimore, MD; Approval of Conversion Application Notice is hereby given that on April 15, 2010, the Office of Thrift Supervision approved the application of Fairmount Bank, Baltimore, Maryland, to...

ACADEMIC TRAINING (O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics , CERN-EST)

CERN Multimedia

Françoise Benz

2002-01-01

21, 22, 23 May LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 The LHC Machine/Experiment Interface by O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics, CERN-EST     This series of three lectures will provide an overview of issues arising at the interface between the LHC machine and the experiments, which are required for guiding the interaction between the collider and the experiments when operation of the LHC commences. A basic description of the LHC Collider and its operating parameters, such as its energy, currents, bunch structure and luminosity, as well as variations on these parameters, will be given. Furthermore, the optics foreseen for the experimental insertions, the sources and intensities of beam losses and the running-in scenarios for the various phases of operation will be discussed. A second module will cover the specific requirements and expectations of each experiment in terms of the layout of experiment...

78 FR 73438 - Reorganization of Sector Baltimore and Hampton Roads; Conforming Amendments

Science.gov (United States)

2013-12-06

...-0251] RIN 1625-ZA32 Reorganization of Sector Baltimore and Hampton Roads; Conforming Amendments AGENCY... Roads' Marine Inspection Zone and Captain of the Port Zones. These conforming amendments are necessary... lines separating Sector Baltimore and Sector Hampton Roads. See Operating Facility Change Order (OFCO...

Visualizing and Understanding Socio-Environmental Dynamics in Baltimore

Science.gov (United States)

Zaitchik, B. F.; Omeara, K.; Guikema, S.; Scott, A.; Bessho, A.; Logan, T. M.

2015-12-01

The City of Baltimore, like any city, is the sum of its component neighborhoods, institutions, businesses, cultures, and, ultimately, its people. It is also an organism in its own right, with distinct geography, history, infrastructure, and environments that shape its residents even as it is shaped by them. Sometimes these interactions are obvious but often they are not; while basic economic patterns are widely documented, the distribution of socio-spatial and environmental connections often hides below the surface, as does the potential that those connections hold. Here we present results of a collaborative initiative on the geography, design, and policy of socio-environmental dynamics of Baltimore. Geospatial data derived from satellite imagery, demographic databases, social media feeds, infrastructure plans, and in situ environmental networks, among other sources, are applied to generate an interactive portrait of Baltimore City's social, health, and well-being dynamics. The layering of data serves as a platform for visualizing the interconnectedness of the City and as a database for modeling risk interactions, vulnerabilities, and strengths within and between communities. This presentation will provide an overview of project findings and highlight linkages to education and policy.

Baltimore District Tackles High Suspension Rates

Science.gov (United States)

Maxwell, Lesli A.

2007-01-01

This article reports on how the Baltimore District tackles its high suspension rates. Driven by an increasing belief that zero-tolerance disciplinary policies are ineffective, more educators are embracing strategies that do not exclude misbehaving students from school for offenses such as insubordination, disrespect, cutting class, tardiness, and…

Sediment accumulation and water volume in Loch Raven Reservoir, Baltimore County, Maryland

Science.gov (United States)

Banks, William S.L.; LaMotte, Andrew E.

1999-01-01

Baltimore City and its metropolitan area are supplied with water from three reservoirs, Liberty Reservoir, Prettyboy Reservoir, and Loch Raven Reservoir. Prettyboy and Loch Raven Reservoirs are located on the Gunpowder Falls (figure 1). The many uses of the reservoir system necessitate coordination and communication among resource managers. The 1996 Amendment to the Safe Drinking Water Act require States to complete source-water assessments for public drinking-water supplies. As part of an ongoing effort to provide safe drinking water and as a direct result of these laws, the City of Baltimore and the Maryland Department of the Environment (MDE), in cooperation with other State and local agencies, are studying the Gunpowder Falls Basin and its role as a source of water supply to the Baltimore area. As a part of this study, the U.S. Geological Survey (USGS), in cooperation with the Maryland Geological Survey (MGS), with funding provided by the City of Baltimore and MDE, is examining sediment accumulation in Loch Raven Reservoir. The Baltimore City Department of Public Works periodically determines the amount of water that can be stored in its reservoirs. To make this determination, field crews measure the water depth along predetermined transects or ranges. These transects provide consistent locations where water depth, or bathymetric, measurements can be made. Range surveys are repeated to provide a record of the change in storage capacity due to sediment accumulation over time. Previous bathymetric surveys of Loch Raven Reservoir were performed in 1943, 1961, 1972, and 1985. Errors in data-collection and analysis methods have been assessed and documented (Baltimore City Department of Public Works, 1989). Few comparisons can be made among survey results because of changing data-collection techniques and analysis methods.

Baltimore Air Toxics Study (BATS)

Energy Technology Data Exchange (ETDEWEB)

Sullivan, D.A. [Sullivan Environmental Consulting, Inc., Alexandria, VA (United States)

1996-12-31

The Baltimore Air Toxics Study is one of the three urban air toxics initiatives funded by EPA to support the development of the national air toxics strategy. As part of this project, the Air Quality Integrated Management System (AIMS) is under development. AIMS is designed to bring together the key components of urban air quality management into an integrated system, including emissions assessment, air quality modeling, and air quality monitoring. Urban area source emissions are computed for a wide range of pollutants and source categories, and are joined with existing point source emissions data. Measured air quality data are used to evaluate the adequacy of the emissions data and model treatments as a function of season, meteorological parameters, and daytime/nighttime conditions. Based on tested model performance, AIMS provides the potential to improve the ability to predict air quality benefits of alternative control options for criteria and toxic air pollutants. This paper describes the methods used to develop AIMS, and provides examples from its application in the Baltimore metropolitan area. The use of AIMS in the future to enhance environmental management of major industrial facilities also will be addressed in the paper.

The process for technology transfer in Baltimore

Science.gov (United States)

Golden, T. S.

1978-01-01

Ingredients essential for a successful decision process relative to proper technological choices for a large city were determined during four years of experience in the NASA/Baltimore Applications Project. The general approach, rationale, and process of technology transfer are discussed.

La face cachée de l'Univers comment explorer les âges sombres et le contenu manquant?

CERN Document Server

2011-01-01

La matière connue n’est qu’une goutte d’eau dans l’Univers. De quoi celui-ci est-il majoritairement constitué ? Que sont ces étranges matière noire et énergie sombre ? Comment imaginer les débuts et la fin de l’Univers ? Y a-t-il même eu un début, ou l’Univers ne fait-il que se dilater et se contracter dans un éternel rebond ? Avec ce dossier, faites le point sur les grandes questions actuelles de la cosmologie.

Une invitation au voyage dans l'univers

CERN Multimedia

Garay, Corinne

2009-01-01

"Philippe de la Catardière, écrivain et journaliste originaire de Priay, publie un essai chez l'Archipel. "Comsmologie à usage du piéton". Il vulgarise pour le grand public les connaissances sur le ciel et l'étude de l'univers. Sa passion pour l'astronomie est née dans son enfance en regardant les ciels étoilés... elle ne l'a plus quitté" (2 pages)

It's not easy going green: Obstacles to tree-planting programs in East Baltimore

Science.gov (United States)

Michael Battaglia; Geoffrey L. Buckley; Michael Galvin; Morgan. Grove

2014-01-01

In 2006, government officials in Baltimore announced plans to double the city's tree canopy over the next thirty years. While the effort has already produced positive results, many parts of the city still lack trees. In this paper we consider whether two neighborhoods in East Baltimore — Berea and Madison-Eastend — are suitable locations for tree...

Baltimore: A Multifaceted Approach to Developing Relationships

Science.gov (United States)

Durham, Rachel E.; Shiller, Jessica; Connolly, Faith

2018-01-01

As community schools spread across the country, community school staff need effective approaches to engaging families and community-based partners. Such principles must be broadly applicable, given community schools' mandate to adapt to different local contexts. Based on recent research on Baltimore City's community schools, the authors highlight…

Urban Waters and the Patapsco Watershed/Baltimore Region (Maryland)

Science.gov (United States)

Patapsco Watershed / Baltimore Area of the Urban Waters Federal Partnership (UWFP) reconnects urban communities with their waterways by improving coordination among federal agencies and collaborating with community-led efforts.

The NASA/Baltimore Applications Project (BAP). Computer aided dispatch and communications system for the Baltimore Fire Department: A case study of urban technology application

Science.gov (United States)

Levine, A. L.

1981-01-01

An engineer and a computer expert from Goddard Space Flight Center were assigned to provide technical assistance in the design and installation of a computer assisted system for dispatching and communicating with fire department personnel and equipment in Baltimore City. Primary contributions were in decision making and management processes. The project is analyzed from four perspectives: (1) fire service; (2) technology transfer; (3) public administration; and (5) innovation. The city benefitted substantially from the approach and competence of the NASA personnel. Given the proper conditions, there are distinct advantages in having a nearby Federal laboratory provide assistance to a city on a continuing basis, as is done in the Baltimore Applications Project.

La mélodie secrète et l'homme créa l'univers

CERN Document Server

Trinh, Xuan Thuan

1991-01-01

L'Univers nous sera-t-il un jour révélé dans la totalité de sa réalité? Parviendrons-nous à percer le secret de sa vraie mélodie? Comment l'infiniment petit a-t-il accouché de l'infiniment grand et comment l'univers tout entier, avec ses centaines de milliards de galaxies, a-t-il jailli d'un "vide microscopique"? Comment, grâce à l'alchimie créatrice des étoiles et à l'existence des planètes, la vie et la conscience ont-elles surgi? Telles sont quelques-unes des questions que ce livre aborde. Il s'adresse à 1"`honnête homme'; curieux du monde qui l'entoure et intéressé par les progrès récents dans l'étude du Cosmos, sans être pour autant équipé du bagage scientifique du spécialiste. En retraçant l'évolution, à travers les âges, de la vision de l'Univers que s'est faite l'homme, il accorde une attention particulière à l'univers actuel, celui du big bang. Mais il sait dépasser l'argument proprement scientifique pour aborder les questions qui se posent inévitablement dans tou...

A School Voucher Program for Baltimore City

Science.gov (United States)

Lips, Dan

2005-01-01

Baltimore City's public school system is in crisis. Academically, the school system fails on any number of measures. The city's graduation rate is barely above 50 percent and students continually lag well behind state averages on standardized tests. Adding to these problems is the school system's current fiscal crisis, created by years of fiscal…

76 FR 50717 - Foreign-Trade Zone 74, Baltimore, MD; Application for Reorganization/Expansion Under Alternative...

Science.gov (United States)

2011-08-16

... 28 (2.5 acres)-- McCormick & Company, Inc., 11102 McCormick Road, Hunt Valley (Baltimore County); Proposed Site 29 (17.6 acres)--McCormick & Company, Inc., 10901 Gilroy Road, Hunt Valley (Baltimore County); and, Proposed Site 30 (8.48 acres)--McCormick & Company, Inc., 4607 Appliance Drive, Belcamp (Harford...

Chakravarti, Prof. Aravinda

Indian Academy of Sciences (India)

Fellow Profile. Elected: 2008 Honorary. Chakravarti, Prof. Aravinda. Date of birth: 6 February 1954. Address: Director - CCDG, McKusick-Nathans Inst. of Genetic, Medicine, Johns Hopkins Univ., School of Medicine, 733 N.Broadway, Baltimore, MD 21205, USA Contact: Office: (+1-410) 502 7525. Fax: (+1-410) 502 7544

The geographic epidemiology of Mycobacterium tuberculosis disease in Baltimore, 1971-1995

Science.gov (United States)

Obasanjo, Olugbenga Olufemi

Given the reemergence of Tuberculosis (TB) in the United States (U.S.) in the 1980s and 1990s, several strategies have emerged to combat the disease. A successful tool has been Directly Observed Therapy (DOT). Chaulk, et al. showed that DOT was responsible for the maintaining the decline in TB rates in Baltimore through the corresponding period of an upswing in rates nationally. In this study, we measure the impact of DOT on the geographic pattern of TB in Baltimore. We used Geographical Information System (GIS) methods to compare the geographic patterns of TB in Baltimore before and after the introduction of DOT in the city. We identified both predictors of TB, and differences in geographic units in Baltimore over time. We measured the impact of the introduction of DOT and Rifampin on various treatment outcomes for TB at about the same time. Despite the drop in numbers of TB cases, the spatial distribution of cases generally remained unchanged until 1995. This was confirmed by the fact that similar predictors were identified in all of the years that were analyzed. However, higher proportions of TB cases were found among blacks and females in more recent years. Death rates have increased significantly while corresponding relapse rates and the mean length of therapy have declined significantly. Rifampin was associated with a longer length of therapy before DOT, but with a shorter duration of therapy following the introduction of DOT. In all of the years analyzed, losses to follow-up (LTFU) do not differ from those completing therapy and are not spatially clustered relative to those completing therapy. DOT has been effective in reducing the numbers of TB cases in Baltimore city-wide without an emphasis on so-called "high-risk" patients for LTFU. Thus, any declines in TB case rates are not due to a decline in a particular group or geographic sector of the city. Universal DOT is effective and does not cause a geographic clustering of difficult-to-reach patients. This

Big Bang et au-delà les nouveaux horizons de l'Univers

CERN Document Server

Barrau, Aurélien

2015-01-01

Notre Univers a-t-il un début ? Est-il unique ? La science moderne a révolutionné notre compréhension de l’Univers. Bien que l’étude du cosmos soit sans doute aussi ancienne que la pensée, notre image du réel est en ce moment même en train de se redessiner. Il est maintenant possible de connaître certains aspects des processus qui eurent lieu moins d’un milliardième de milliardième de milliardième de seconde après le Big Bang. À la lumière des dernières découvertes du satellite Planck, Aurélien Barrau décrit en termes simples le cosmos qui se dessine sous nos yeux. Trous noirs, modèle standard de la physique des particules, gravité… les piliers et les énigmes du Big Bang sont abordés les uns après les autres, à la manière d’une balade aux origines de l’Univers. « Parce que la science est avant tout une aventure humaine, j’ai esquissé, ici et là, en contrepoint des explications physiques fournies dans la langue la plus simple et la plus accessible possible, mon expér...

Accountable Talk: "Real" Conversations in Baltimore City Schools

Science.gov (United States)

Ahmann, Chloe

2017-01-01

This article examines the fundamental disconnect between discourses of accountability in education policy and their interpretation on the ground by parents. Based on data from two sites in Baltimore--district-led teacher training and a community facing school restructuring--I argue that both parents and education professionals consider…

Comment fonctionne l’Univers ? Ce que le LHC peut nous apprendre

CERN Multimedia

CERN. Geneva

2008-01-01

L'Univers en son enfance était une "soupe" de particules, de plus en plus chaudes (de plus haute énergie) à mesure qu'on remonte vers sa naissance, le "big bang". C'est ainsi que les observations à des énergies de plus en plus élevées nous permettent, par exemple, de nous approcher de plus près de la prime jeunesse de l'Univers et, donc, de mieux le comprendre. L'étude du macro- et du micro-cosme sont une science unique dans laquelle, de façon surprenante, ce que nous comprenons le moins bien est le vide, qui ne semble pas l'être: il existe une différence fondamentale entre le vide et le néant. Le LHC pourrait nous permettre de voir les vibrations de la "substance" du vide, qu'on appelle les particules 'de Higgs'.

76 FR 4284 - Grant of Authority for Subzone Status; Tulkoff Food Products, Inc. (Dehydrated Garlic), Baltimore...

Science.gov (United States)

2011-01-25

... Status; Tulkoff Food Products, Inc. (Dehydrated Garlic), Baltimore, MD Pursuant to its authority under..., has made application to the Board for authority to establish a special-purpose subzone at the garlic... garlic products at the Tulkoff Food Products, Inc., facility located in Baltimore, Maryland (Subzone 74C...

Forecasted electric power demands for the Baltimore Gas and Electric Company. Volume 1 and Volume 2. Documentation manual

International Nuclear Information System (INIS)

Estomin, S.L.; Beach, J.E.; Goldsmith, J.V.

1991-05-01

The two-volume report presents the results of an econometric forecast of peak load and electric power demand for the Baltimore Gas and Electric Company (BG ampersand E) through the year 2009. Separate energy sales models were estimated for residential sales in Baltimore City, residential sales in the BG ampersand E service area excluding Baltimore City, commercial sales, industrial sales, streetlighting sales, and Company use plus losses. Econometric equations were also estimated for electric space heating and air conditioning saturation in Baltimore City and in the remainder of the BG ampersand E service territory. In addition to the energy sales models and the electric space conditioning saturation models, econometric models of summer and winter peak demand on the BG ampersand E system were estimated

Civic Engagement and Gentrification Issues in Metropolitan Baltimore

Science.gov (United States)

Durington, Matthew; Maddox, Camee; Ruhf, Adrienne; Gass, Shana; Schwermer, Justin

2009-01-01

Since the fall of 2006 a number of Towson University students concentrating in the discipline of anthropology have been part of a civic engagement and service-learning project focusing on an historic African-American community in Baltimore. While the focus of the research project concentrates on the processes of gentrification, individual student…

Le jardin des particules l'Univers tel que le voient les physiciens

CERN Document Server

Kane, Gordon

1996-01-01

Que savons-nous de l'Univers ? Que nous reste-t-il encore à comprendre ? Ce livre explique de façon limpide - et non sans humour - comment les physiciens travaillent, quels sont leurs outils, leurs certitudes et leurs interrogations.

Annual Trauma Anesthesia and Critical Care Symposium (4th) Held in Baltimore, Maryland on May 2 - 5, 1991

Science.gov (United States)

1991-07-01

Attending Anesthesiologist The Shock Trauma Center, MIEMSS University of Maryland Medical System Editor, Chest Physiotherapy in the ICU Baltimore...D. Anticholinergic E, Anesthetic Adjuncts F. Guides to management VII. Potential Problems A. Pediatric patients B. Geriatric patients

All-in-one 3D printed microscopy chamber for multidimensional imaging, the UniverSlide

Science.gov (United States)

Alessandri, Kevin; Andrique, Laetitia; Feyeux, Maxime; Bikfalvi, Andreas; Nassoy, Pierre; Recher, Gaëlle

2017-02-01

While live 3D high resolution microscopy techniques are developing rapidly, their use for biological applications is partially hampered by practical difficulties such as the lack of a versatile sample chamber. Here, we propose the design of a multi-usage observation chamber adapted for live 3D bio-imaging. We show the usefulness and practicality of this chamber, which we named the UniverSlide, for live imaging of two case examples, namely multicellular systems encapsulated in sub-millimeter hydrogel shells and zebrafish larvae. We also demonstrate its versatility and compatibility with all microscopy devices by using upright or inverted microscope configurations after loading the UniverSlide with fixed or living samples. Further, the device is applicable for medium/high throughput screening and automatized multi-position image acquisition, providing a constraint-free but stable and parallelized immobilization of the samples. The frame of the UniverSlide is fabricated using a stereolithography 3D printer, has the size of a microscopy slide, is autoclavable and sealed with a removable lid, which makes it suitable for use in a controlled culture environment. We describe in details how to build this chamber and we provide all the files necessary to print the different pieces in the lab.

All-in-one 3D printed microscopy chamber for multidimensional imaging, the UniverSlide

Science.gov (United States)

Alessandri, Kevin; Andrique, Laetitia; Feyeux, Maxime; Bikfalvi, Andreas; Nassoy, Pierre; Recher, Gaëlle

2017-01-01

While live 3D high resolution microscopy techniques are developing rapidly, their use for biological applications is partially hampered by practical difficulties such as the lack of a versatile sample chamber. Here, we propose the design of a multi-usage observation chamber adapted for live 3D bio-imaging. We show the usefulness and practicality of this chamber, which we named the UniverSlide, for live imaging of two case examples, namely multicellular systems encapsulated in sub-millimeter hydrogel shells and zebrafish larvae. We also demonstrate its versatility and compatibility with all microscopy devices by using upright or inverted microscope configurations after loading the UniverSlide with fixed or living samples. Further, the device is applicable for medium/high throughput screening and automatized multi-position image acquisition, providing a constraint-free but stable and parallelized immobilization of the samples. The frame of the UniverSlide is fabricated using a stereolithography 3D printer, has the size of a microscopy slide, is autoclavable and sealed with a removable lid, which makes it suitable for use in a controlled culture environment. We describe in details how to build this chamber and we provide all the files necessary to print the different pieces in the lab. PMID:28186188

Relationships between pediatric asthma and socioeconomic/urban variables in Baltimore, Maryland

Science.gov (United States)

Kimes, Daniel; Ullah, Asad; Levine, Elissa; Nelson, Ross; Timmins, Sidey; Weiss, Sheila; Bollinger, Mary E.; Blaisdell, Carol

2004-01-01

Spatial relationships between clinical data for pediatric asthmatics (hospital and emergency department utilization rates), and socioeconomic and urban characteristics in Baltimore City were analyzed with the aim of identifying factors that contribute to increased asthma rates. Socioeconomic variables and urban characteristics derived from satellite data explained 95% of the spatial variation in hospital rates. The proportion of families headed by a single female was the most important variable accounting for 89% of the spatial variation. Evidence suggests that the high rates of hospital admissions and emergency department (ED) visits may partially be due to the difficulty of single parents with limited resources managing their child's asthma condition properly. This knowledge can be used for education towards mitigating ED and hospital events in Baltimore City.

Immigration et crise d'identite dans l'Univers Romanesque de Sami ...

African Journals Online (AJOL)

Immigration et crise d'identite dans l'Univers Romanesque de Sami Tchak. ... La littérature africaine du XXIème siècle a eu une grande transformation. Cela est dû au fait ... It is established that Sami Tchak takes profound interest in projecting and handling the themes of immigration and identity crisis in his novelistic world.

Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

Directory of Open Access Journals (Sweden)

Bo You

2015-01-01

Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

75 FR 30747 - Drawbridge Operation Regulation; Curtis Creek, Baltimore, MD

Science.gov (United States)

2010-06-02

... remote location at the City of Baltimore Transportation Management Center. This proposed change would... viewing or submitting material to the docket, call Renee V. Wright, Program Manager, Docket Operations... rule based on your comments. Viewing Comments and Documents To view comments, as well as documents...

Community Resources for Career Education: Starring Baltimore's McCormick Plan

Science.gov (United States)

Carey, E. Niel; Marshall, Howard E.

1973-01-01

The article develops from a general discussion of the utilization of community resources in career education to a discussion of a particular program--the McCormick Plan in Baltimore--and other Maryland programs. Suggestions drawn from those programs are offered for identifying and using such resources. (AG)

78 FR 36017 - MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad-Operation Exemption-Hilco SP Rail, LLC

Science.gov (United States)

2013-06-14

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35725] MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad-- Operation Exemption--Hilco SP Rail, LLC MCM Rail Services LLC, d/b/a Baltimore Industrial Railroad (MCM), a noncarrier, has filed a verified notice of exemption...

Youth Apprenticeship: A Hopeful Approach for Improving Outcomes for Baltimore Youth. The Abell Report. Volume 28, No. 2

Science.gov (United States)

Lerman, Robert I.; Packer, Arnold

2015-01-01

Youth transitions to rewarding careers remain a critical problem for America's current and future workforce. In Baltimore, where only one in five graduates of Baltimore City Public Schools matriculates to a four-year college and the unemployment rate for 16 to 19 year-olds is over 40 percent, opportunities to gain meaningful training and work…

On the Maximum Separation of Visual Binaries M. I. Nouh1,∗ & M. A. ...

Indian Academy of Sciences (India)

Stars, http://www.ad.usno.navy.mil/wds/orb6/orb6.html. Kuiper, G. P. 1935, Publ. Astron. Soc. Pacific., 47(15), 12. Öpik, E. 1924, Publ. Obs. Astro. Univ. Tartu., 25, 6. Press, W. H., Teukolsky, S. A., Vetterling, W. H., Flannery, B.P. 1992, Numerical Recipes. (Cambridge Univ. Press). Reed, B. C. 1984, J. R. Astron. Soc. Can.

National Marine Fisheries Service Grain Size Data from the Baltimore Canyon Trough

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Grain size analyses produced by Robert Reid of the NOAA National Marine Fisheries Service for the NOAA/BLM Outer Continental Shelf Mid-Atlantic Project, Baltimore...

World Geography. The Port of Baltimore Workplace Skills Development Project.

Science.gov (United States)

Walker, Sam

This set of learning modules was developed during a project to deliver workplace literacy instruction to individuals employed in the more than 50 businesses related to the activities of the Port of Baltimore. It is intended to accomplish the following objectives: familiarize students with basic concepts of geography; give students knowledge of…

Perspectives on Obesity and Its Treatment: Health Care Providers and the General Public in Rural West Virginia and Urban Baltimore

Science.gov (United States)

Menez, Steven; Cheskin, Lawrence; Geller, Gail

2013-01-01

Objective: To determine and compare the perspectives of the general public and health care providers (HCPs) on obesity and its treatment in rural West Virginia (WV) and Baltimore, MD. Method: Surveys were completed in both locations by the general public (WV: "n" = 200; Baltimore: "n" = 171) and HCPs (WV: "n" = 25;…

Launch of Village Blue Web Application Shares Water Monitoring Data with Baltimore Community

Science.gov (United States)

EPA and the U.S. Geological Survey (USGS) have launched their mobile-friendly web application for Village Blue, a project that provides real-time water quality monitoring data to the Baltimore, Maryland community.

Integrative approaches to investigating human-natural systems: the Baltimore ecosystem study

Science.gov (United States)

Mary L. Cadenasso; Steward T.A. Pickett; Morgan J. Grove; Morgan J. Grove

2006-01-01

This paper presents an overview of the research approaches used to study metropolitan Baltimore (Maryland, USA) as an ecological system. The urban ecosystem is a complex of biophysical, social, and built components, and is studied by an interdisciplinary teamof biological, social, and physical scientists, and urban designers. Ecology ?of? themetropolis is addressed...

Allocation of petroleum feedstock: Baltimore Gas and Electric Company, Sollers Point SNG Plant, Sollers Point, Baltimore County, Maryland. Final environmental impact statement

Energy Technology Data Exchange (ETDEWEB)

Liverman, James L.

1978-04-01

An allocation of naphtha feedstock up to 2,186,000 barrels per year to Baltimore Gas and Electric Company (BG and E) to operate its synthetic natural gas (SNG) facility is being considered. The allocation would enable BG and E to produce 10,800,000 mcf of SNG during a 180 day period. Operation of the plant at design capacity is expected to result in annual pollution emissions as follows: 626.4 tons of sulfur oxides, 168.5 tons of nitrogen oxides and 21.6 tons of particulate matter. Incremental emissions due to plant operations relative to existing emissions in Baltimore County are less than 1%. All Federal and State air quality standards should be met. Treated effluent is to be discharged into the Patapasco River where the environmental impacts are not expected to be significant. The SNG facility has been designed to be in compliance with all applicable Federal, State and local effluent standards. Water consumption requirements of 335,000 gallons per day are not expected to significantly tax the area's water resources. Sound generated by the SNG facility will be inaudible or imperceptible. All other operational impacts on land use, population, visual quality, roadways, community facilities and services and ecological systems were judged to be minimal. Environmental impacts resulting from various alternatives ranging from full allocation through denial of an allocation are discussed.

LHC : sur la piste des mysteres de l`Univers par Michael Doser

CERN Multimedia

CERN. Geneva

2007-01-01

Le CERN, le plus grand centre en physique des particules au monde, va mettre en service le Grand collisionneur de hadrons (Large Hadron Collider), le LHC. Cette machine, le plus grand rouage du complexe d’accélérateurs du CERN, doit répondre aux énigmes qui subsistent sur les briques élémentaires de la matière et l’histoire de l’Univers.

Getting to High School in Baltimore: Student Commuting and Public Transportation

Science.gov (United States)

Stein, Marc L.; Grigg, Jeffrey; Cronister, Curt; Chavis, Celeste; Connolly, Faith

2017-01-01

This report is the first publication of a multi-year project examining the relationship between student commutes using public transportation and on-time arrival and absenteeism. This report begins to develop a basic understanding of how students commute to high school in Baltimore with a focus on those using public transportation. The report is…

Medical education resources initiative for teens program in baltimore: A model pipeline program built on four pillars.

Science.gov (United States)

Mains, Tyler E; Wilcox, Mark V; Wright, Scott M

2016-01-01

Less than 6% of U.S. medical school applicants are African-American. The lack of diversity among physicians, by race as well as other measures, confers a negative impact on the American healthcare system because underrepresented minority (URM) physicians are more likely to practice in underserved communities and deliver more equitable, culturally competent care. MERIT (Medical Education Resources Initiative for Teens) is a nonprofit organization based in Baltimore, Maryland, USA. MERIT prepares URM high school students for health careers by providing a holistic support system for seven consecutive years. The program model, which utilizes weekly Saturday sessions, summer internships, and longitudinal mentoring, is built on four foundational pillars: (1) Ignite the Fire, (2) Illuminate the Path, (3) Create the Toolkit, and (4) Sustain the Desire. Since 2011, MERIT has supported 51 students in the Baltimore City Public School System. For the past two years, 100% (n = 14) of MERIT seniors enrolled in universities, compared to only 20.2% of Baltimore City students overall. While it is too early to know whether MERIT alumni will realize their goals of becoming healthcare professionals, they are currently excelling in universities and over 75% (n = 17) are still planning to pursue graduate degrees in health-related fields. After piloting an effective program model, MERIT now has three key priorities moving forward: (1) Creating a sustainable and thriving organization, (2) increasing the number of scholars the program supports in Baltimore, and (3) expanding MERIT to other cities.

Antimatière Est-elle la clé de l'Univers?

CERN Multimedia

Grousson, Mathieu

2009-01-01

"De quoi est fait l'Univers? De matière ordinaire et, selon la théorie actuelle, de matière noire et d'énergie noire... dont nul ne sait rien! Et s'il s'agissait plutôt d'antimatière? Car elle permet de réécrire l'histoire du cosmos sans déroger à ses lois et, cette fois, sans nulle zone d'ombre. Reste à vérifier qu'elle antigravite bien..." (14 pages)

78 FR 52231 - 2013 Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular...

Science.gov (United States)

2013-08-22

..., will remain open during the time period of the event. There are five additional I-95 interchanges, just... Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular Traffic To... Transportation Authority (MDTA) to temporarily close a portion of I-395 (just south of Conway Street in Baltimore...

Property values, parks, and crime: a hedonic analysis in Baltimore, MD

Science.gov (United States)

Austin Troy; J. Morgan Grove

2008-01-01

While urban parks are generally considered to be a positive amenity, past research suggests that some parks are perceived as a neighborhood liability. Using hedonic analysis of property data in Baltimore, MD, we attempted to determine whether crime rate mediates how parks are valued by the housing market. Transacted price was regressed against park proximity, area-...

A long view of polluting industry and environmental justice in Baltimore

Science.gov (United States)

Christopher G. Boone; Michail Fragkias; Geoffrey L. Buckley; J. Morgan. Grove

2014-01-01

This study examines the density of polluting industry by neighborhoods in Baltimore over the long term, from 1950 to 2010, to determine if high pollution burdens correspond spatially with expected demographic and housing variables predicted in the environmental justice literature. For 1960-1980 we use data on heavy industry from Dun and Bradstreet directories and for...

Univé customer survey: Pay-As-You-Drive (PAYD) insurance : Report PAYD-2. Feedback from Pay-As-You-Drive insurance, both outside and inside the car

NARCIS (Netherlands)

Lewis Evans, Ben; den Heijer, Anne; Dijksterhuis, Chris; de Waard, Dick; Brookhuis, Karel; Tucha, Oliver

2013-01-01

On the 10th of January 2013 over 3500 Univé clients were contacted and asked to fill in an online survey via Qualtrics, a survey website company licenced by the University of Groningen, about the future of car insurance at Univé. These customers could be classified under three main headings; car

The ABCs of Keeping on Track to Graduation: Research Findings from Baltimore

Science.gov (United States)

Mac Iver, Martha Abele; Messel, Matthew

2013-01-01

This study of graduation outcomes in Baltimore uses multivariate analysis of longitudinal student cohort data to examine the impact of factors identified in previous research as early warning indicators of a dropout outcome. Student cohort files were constructed from longitudinal administrative data (following all first-time 2004-2005 and…

Time and the Paradigm of Operational Art - Authority and Responsibility of the Operational Artist in the Political Military Discourse

Science.gov (United States)

2017-02-15

of Staff (JCS) consisting of General George C. Marshall, Air Chief General Henry Arnold, and the chief of naval operations Admiral Ernest J. King ...Gary R. Hess, Presidential Decisions for War: Korea, Vietnam, the Persian Gulf, and Iraq (Baltimore, MD: Johns Hopkins University Press, 2009), 78-84...War: Korea, Vietnam, the Persian Gulf, and Iraq. 2nd ed. Baltimore, MD: Johns Hopkins University Press, 2009. Imlay, Talbot. “Western Allied Ideology

Breast Cancer Research Training Grant

Science.gov (United States)

1999-03-01

Pharmacological Sciences, Lab. of Toxicology, Milano, Italy. presence of serum for 16 hr to enhance or deplete GSH levels before BaP Tributyltin ( TBT ...Holladay, S. D., and Smith. B. J. (1995). Alterations in murine fetal thymus Nebert. D. W., Jensen. N. M., Levitt, R. C., and Felton. J. S. (1980). Toxic ...Hungerford. Johns Hopkins University. Baltimore. MD 21239 Toxic -il. Univ. of South. Cal., Los Angeles.CA90033 Propagationofllcho-ndrocytes in microcarrier

Support for ECHONET-based smart home environments in the universAAL ecosystem

OpenAIRE

Pham, Van Cu; Lim, Yuto; Tan, Yasuo; Chong, Nak Young

2018-01-01

With the advent of information and communication technology, many Ambient Assisted Living (AAL) solutions are being proposed to increase the quality of life of elderly people and reduce health and social care costs. Among these AAL solutions, universAAL seems to be the most promising platform for easy and economical development of AAL services. However, in its current state, the platform is incompatible with smart home systems which are based on the ECHONET standard. This paper presents the b...

Lagrangian Sampling of 3-D Air Quality Model Results for Regional Transport Contributions to Sulfate Aerosol Concentrations at Baltimore, MD in Summer of 2004

Science.gov (United States)

The Lagrangian method provides estimates of the chemical and physical evolution of air arriving in the daytime boundary layer at Baltimore. Study results indicate a dominant role for regional transport contributions of those days when sulfate air pollution is highest in Baltimor...

California Dreams in Southeast Baltimore: Using Technology in a Challenging School Setting.

Science.gov (United States)

Slekar, Timothy D.

2000-01-01

Provides an example of how two teachers in the Baltimore (Maryland) City Schools utilized the Internet to help students make a connection with their community. Describes a unit that focuses on the use of Tupac Shakur's rap "California Dream" in order to motivate the students to take pride in their community. (CMK)

75 FR 31511 - Ideal Federal Savings Bank, Baltimore, MD; Approval of Conversion Application

Science.gov (United States)

2010-06-03

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-46: OTS No. 08283] Ideal Federal Savings Bank, Baltimore, MD; Approval of Conversion Application Notice is hereby given that on May 24, 2010, the Office of Thrift Supervision approved the application of Ideal Federal Savings Bank...

77 FR 11434 - Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD

Science.gov (United States)

2012-02-27

...-AA00 Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD AGENCY: Coast Guard, DHS... intended route immediately prior to, during, and following the scheduled towing evolution, vessel traffic... made to the maritime community via marine information broadcasts so mariners may adjust their plans...

The syphilis elimination project: targeting the Hispanic community of Baltimore city.

Science.gov (United States)

Endyke-Doran, Cara; Gonzalez, Rosa Maria; Trujillo, Marangellie; Solera, Angelo; Vigilance, Pierre N; Edwards, Lori A; Groves, Sara L

2007-01-01

The objective of the Syphilis Elimination Project was to decrease the incidence of syphilis in the Hispanic community of Baltimore City through a culturally appropriate health initiative. Both qualitative and quantitative methods were used in the study design. Surveillance data were used to collect testing information. Comparisons at the start and end of the project measured change in individual knowledge about syphilis. Cross-sectional data from interviews with business owners and qualitative comments from outreach workers evaluated perception of program effectiveness. The local health department collected surveillance data. A convenience sample of 63 Hispanic community members, 12 business owners/managers, and 8 outreach workers was utilized throughout the evaluation process. The project was a culturally appropriate approach to health promotion with street and business outreach. Post intervention there was a statistically significant increase in knowledge about syphilis within the Hispanic community and an increase in testing behaviors. The Syphilis Elimination Project was created in response to a marked increase in syphilis in Baltimore among the Hispanic population and a health disparity that existed within the city. It increased community members' knowledge of syphilis and positively influenced testing behaviors.

How can a successful multi-family residential recycling programme be initiated within Baltimore City, Maryland?

Science.gov (United States)

Schwebel, Michael B

2012-07-01

Baltimore City formally began recycling in 1989 with all neighbourhoods having residential collection by 1992. Although the city of 637 000 has recycled for approximately 20 years, almost all residents in multi-family residential (MFR) housing have been and are still barred from participating at their residences. Discussions with City officials and residents have verified this antiquated policy of exclusion within MFR housing. Yet, the policy is still observed by the Department of Public Works even though the updated single-stream Code states that the 'Director of Public Works must collect all. . .recyclable materials. . .from all dwellings, including multiple-family dwellings'. The purpose of this study's is to provide policies, regulations, and recommendations for implementing requisite MFR recycling within Baltimore City. The study's methodology follows a case study approach by examining three cities in the United States that currently mandate MFR recycling: Chicago, Illinois; Boston, Massachusetts; and Arlington, Virginia. Post-analysis suggests that while some cities' MFR programmes perform poorly, each city's strengths aid in creating specific proposals that can produce a successful MFR recycling program in Baltimore City. These tenets of a future MFR recycling program form the basis of a successful MFR recycling program that will allow all city residents to participate via initiatives in the categories of both programme, accessibility, and informing and self-review.

Investigating stakeholders' perceptions of the link between high STD rates and the current Baltimore City Public Schools' sex education curriculum

Science.gov (United States)

Bolden, Shenell L. T.

The purpose of this exploratory study was to examine key stakeholders' perceptions of the current Baltimore City Public Schools' (BCPS) sex education curriculum and to gain insight into how they believe the curriculum could be modified to be more effective. A mixed methods approach using qualitative and quantitative data collection consisting of a survey, focus group interview, and individual interviews was conducted to gather information on stakeholders' perceptions. The stakeholders included: (1) former students who received their sex education courses in the Baltimore City Public School system (BCPS); (2) teachers in BCPS who were affiliated with the sex education curriculum; (3) health care professionals who screened and/or treated East Baltimore City residents for a sexually transmitted disease (STD) and; (4) one policy maker who was responsible for creating sex education curriculum at the national level. Analysis of the quantitative data from former Baltimore City Public School students revealed a general satisfaction with the current sex education curriculum. However, qualitative data from the same group of stakeholders revealed several changes they thought should be implemented into the program in an effort to improve the current curriculum. Findings from the other groups after qualitative analysis of the interviews suggest three major themes in support of curriculum change: (1) a blended curriculum that integrates both the cognitive and affective learning domains; (2) knowledge of prevention of STD's and pregnancy; and (3) authentic teaching and learning. Results from this study strongly suggest that the Baltimore City Public School system is apathetic to the sexual health needs of students and, therefore, is inadvertently contributing to the high rate of sexually transmitted diseases among young people. Keywords: Abstinence, Affective domain, Indoctrination, Behavior Modification, Cognitive domain, Sex education curriculum, Sexually Transmitted Diseases.

76 FR 9407 - Fraternity Federal Savings & Loan Association, Baltimore, MD; Approval of Conversion Application

Science.gov (United States)

2011-02-17

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-58 OTS No. 01292 and H 4762] Fraternity Federal Savings & Loan Association, Baltimore, MD; Approval of Conversion Application Notice is hereby given that on February 10, 2011, the Office of Thrift Supervision approved the application of...

77 FR 25592 - Safety Zone; Patapsco River, Northwest and Inner Harbors, Baltimore, MD

Science.gov (United States)

2012-05-01

... National Technology Transfer and Advancement Act (NTTAA) (15 U.S.C. 272 note) directs agencies to use... historic sloop-of-war USS CONSTELLATION on May 24, 2012. This action is necessary to provide for the safety...-of-war USS CONSTELLATION in Baltimore, Maryland on May 24, 2012. Planned events include a three- hour...

Contaminant levels and toxicity of sediments and water of Baltimore Harbor and Back River, Maryland

International Nuclear Information System (INIS)

Logan, D.T.; Jacobs, F.; Mehrotra, N.

1995-01-01

The Patapsco and Back River Watershed drains the Baltimore metropolitan area, Maryland's most heavily industrialized and urbanized region. Due to the intensive development and industrialization of the Baltimore metropolitan area over the past 250 years, high levels of contaminants have been discharged into Baltimore Harbor on the Patapsco River and into the Back River. Pollutants historically discharged include heavy metals, petroleum hydrocarbons, pesticides, cyanide, sewage, other organic chemicals, and nutrients. Sources have included industrial and municipal discharges, sewerage overflows, urban runoff, and leaks and spills from vessels and on-land facilities. The Maryland Department of the Environment undertook this study of ambient conditions as part of a developing strategy to assess and improve conditions in the Chesapeake Bay and its tributaries. Past studies were compiled, evaluated, and synthesized to identify the areas of degraded conditions and contaminants of possible concern. Sediment contaminant levels were assessed using historical sediment chemistry data, Effects Range Low and Median concentrations (ER-L and ER-M) as toxicological benchmarks, and a sum of toxicity units approach for multiple contaminants. Data on toxicity testing and biological monitoring was compared to sediment and water quality data. Fish tissue data were used to examine bioaccumulated chemicals. A computerized Geographical Information System (GIS) was used to manipulate and display complex geographical data. The final identification of areas and chemicals of potential concern relied on a syntheses of these results as well as information on present and past contaminant loadings

Characteristics of Black Men Who Have Sex With Men in Baltimore, Philadelphia, and Washington, D.C.: Geographic Diversity in Socio-Demographics and HIV Transmission Risk.

Science.gov (United States)

German, Danielle; Brady, Kathleen; Kuo, Irene; Opoku, Jenevieve; Flynn, Colin; Patrick, Rudy; Park, Ju Nyeong; Adams, Joella; Carroll, Makeda; Simmons, Ron; Smith, Carlton R; Davis, Wendy W

2017-07-01

Baltimore, Philadelphia, and Washington, DC are geographically proximate cities with high HIV prevalence, including among black men who have sex with men (BMSM). Using data collected among BMSM in CDC's National HIV Behavioral Surveillance project, we compared socio-demographic characteristics, HIV risk behaviors, and service utilization to explore similarities and differences that could inform local and regional HIV intervention approaches. BMSM were recruited through venue time location sampling, June-December, 2011. Participants completed identical socio-behavioral surveys and voluntary HIV testing. Analyses were conducted among the full sample and those aged 18-24. Participants included 159 (DC), 364 (Baltimore), and 331 (Philadelphia) eligible BMSM. HIV prevalence was 23.1% (DC), 48.0% (Baltimore), 14.6% (Philadelphia) with 30.6%, 69.0%, 33.3% unrecognized HIV infection, respectively. Among BMSM 18-24, HIV prevalence was 11.1% (DC), 38.9% (Baltimore), 9.6% (Philadelphia) with unrecognized HIV infection 0.0%, 73.8%, 60.0% respectively. Compared with the other 2 cities, Baltimore participants were less likely to identify as gay/homosexual; more likely to report unemployment, incarceration, homelessness, sex exchange; and least likely to use the internet for partners. DC participants were more likely to have a college degree and employment. Philadelphia participants were more likely to report gay/homosexual identity, receptive condomless anal sex, having only main partners, and bars/clubs as partner meeting places. Sexually transmitted disease testing was universally low. Analyses showed especially high HIV prevalence among BMSM in Baltimore including among young BMSM. Socio-demographic characteristics and HIV infection correlates differed across cities but unrecognized HIV infection and unknown partner status were universally high.

La matière noire, clé de l'univers ?

CERN Document Server

Combes, Françoise

2015-01-01

Si ces dernières années de nombreuses découvertes ont permis de mieux connaître notre Univers, 95 % de son contenu, constitué de matière et d énergie noires, nous est encore aujourd hui totalement inconnu. Quelle est la nature de cette matière noire, de ces particules exotiques, sans lesquelles ne pourraient se former les galaxies ? L ouvrage, rédigé par Françoise Combes astrophysicienne dont les travaux de recherche dans ce domaine sont unanimement reconnus fait le point sur l état actuel des connaissances, les découvertes les plus récentes et les prochains défis à relever.

Smashing WordPress Themes Making WordPress Beautiful

CERN Document Server

Hedengren, Thord Daniel

2011-01-01

The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs

75 FR 51333 - Madison Square Federal Savings Bank, Baltimore, MD; Approval of Conversion Application

Science.gov (United States)

2010-08-19

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-49: OTS Nos. 08156 and H4736] Madison Square Federal Savings Bank, Baltimore, MD; Approval of Conversion Application Notice is hereby given that on August 12, 2010, the Office of Thrift Supervision approved the application of Madison Square...

75 FR 41927 - Ideal Federal Savings Bank, Baltimore, Maryland; Notice of Appointment of Receiver

Science.gov (United States)

2010-07-19

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Ideal Federal Savings Bank, Baltimore... contained in section 5(d)(2) of the Home Owners' Loan Act, the Office of Thrift Supervision has duly appointed the Federal Deposit Insurance Corporation as sole Receiver for Ideal Federal Savings Bank...

2006 Rare Neuroimmunological Disorders Symposium; Sheraton Inner Harbor, Baltimore, MD, July 20-23, 2006

DEFF Research Database (Denmark)

Kerr, DA; Antel, JP; Arnold, DL

2007-01-01

On July 20-22nd 2006, the second International Rare Neuroimmunologic Disorders Symposium was held in Baltimore, Maryland. The purpose of this symposium was to bring together diverse groups interested in immune-mediated disorders of the nervous system. The symposium was not disease-specific but at...

Einstein dans l'Univers - French version only

CERN Multimedia

2005-01-01

Dans le cadre de l'Année internationale de la physique, la section de physique de l'Université de Genève organise une série de conférences pour les non-initiés. Chacune des conférences débute par une démonstration de détection de rayons cosmiques dans l'auditoire et l'utilisation de ces signaux venus du fond de l'Univers pour créer une « musique cosmique », en collaboration avec le Professeur Ellberger du Conservatoire de musique de Genève. La cinquième conférence, donnée par le professeur Michele Maggiore de l'Université de Genève, s'intéresse à l'une des contributions les plus remarquables d'Einstein, la relativité générale. L'une des prédictions de cette théorie est l'existence des ondes gravitationnelles, véritables vibrations de l'espace-temps qui peuve...

RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING

Directory of Open Access Journals (Sweden)

Peter Križan

2016-02-01

Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.

L'univers créativité cosmique et créativité artistique

CERN Document Server

Reeves, Hubert; Champion, Claire

2016-01-01

Avec le talent de vulgarisateur qu'on lui connaît, Hubert Reeves explique, en faisant d'habiles parallèles avec la créativité humaine, ce que l'on sait aujourd'hui de la création de l'Univers. Avec ses mots et ses idées simples, épurées comme des haïkus, Hubert Reeves arrive à faire comprendre l'infiniment complexe, tout en amenant ses lecteurs au bord du gouffre métaphysique.

L'univers des particules une introduction

CERN Document Server

Diu, Bernard

2017-01-01

Au début du XXe siècle, les scientifiques imaginaient que l'ensemble du monde était construit à partir de trois "particules élémentaires" (électron, proton, photon). Depuis, nous avons appris que notre univers contient un nombre considérable de particules - soit des corps individualisés d'extension réduite - de natures et de caractéristiques très diverses, qu'il serait illusoire de chercher à énumérer de manière formelle et systématique. C'est pourquoi le propos de ce livre suit une stratégie fondamentalement différente. Il s'organise autour de certaines propriétés générales que laissent apparaître l'observation et l'étude des particules dans leur existence et leur conduite primaire. Aussi, chacune des parties de cet ouvrage rassemble plusieurs chapitres de thèmes voisins, mais un sujet donné peut également être traité en divers endroits et, de ce fait, être abordé sous différents angles de manière complémentaire. De telles compositions et décompositions d'éléments proche...

The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters

Science.gov (United States)

2016-01-04

AFRL-AFOSR-VA-TR-2016-0075 The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters KIT BOWEN JOHNS HOPKINS UNIV BALTIMORE MD...2. REPORT TYPE Final Performance 3. DATES COVERED (From - To) 30-09-2014 to 29-09-2015 4. TITLE AND SUBTITLE The Oxidation Products of Aluminum ...Hydride and Boron Aluminum Hydride Clusters 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-14-1-0324 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) KIT

Recruitment of older women: lessons learned from the Baltimore Hip Studies.

Science.gov (United States)

Resnick, Barbara; Concha, Betty; Burgess, Judy Graham; Fine, Mary Louise; West, Linda; Baylor, Karen; Nahm, Eun Shim; Buie, Verita Custis; Werner, Michelle; Orwig, Denise; Magaziner, Jay

2003-01-01

This study used a qualitative approach in which participants were asked to write about their experiences in recruiting older women into either one of two exercise intervention studies that are part of the Baltimore Hip Studies. The sample included 8 researcher nurses all women, White, and 42-53 years of age. Older adults, particularly older women, are less likely to participate in research studies when compared to their younger counterparts. The purpose of this study was to explore the techniques successfully used by research nurses in the Baltimore Hip Studies to recruit older women after hip fracture into exercise intervention studies. Data analysis was performed using basic content analysis (Crabtree & Miller, 1992; Miles & Huberman, 1984) "in vivo" coding (Dowd, 1991), or "grounded" coding (Glaser & Strauss, 1967), which involves using the informants' own words to capture a particular idea. A total of 16 codes were identified and reduced to nine themes. Seven themes focused on techniques that facilitated recruitment: (a) caring for individuals; (b) emphasizing benefits; (c) eliciting support from others; (d) being an expert; (e) using role models; (f) using good timing; and (g) giving good first impressions. The remaining two themes identified barriers to recruitment: (a) time commitment and (b) lack of support. Based on these themes, specific recruitment techniques are recommended. Ongoing research, however, is needed to establish the most effective recruitment procedures with older women.

WordPress Bible

CERN Document Server

Brazell, Aaron

2010-01-01

The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.

Nitrogen input from residential lawn care practices in suburban watersheds in Baltimore county, MD

Science.gov (United States)

Neely L. Law; Lawrence E. Band; J. Morgan. Grove

2004-01-01

A residential lawn care survey was conducted as part of the Baltimore Ecosystem Study, a Long-term Ecological Research project funded by the National Science Foundation and collaborating agencies, to estimate the nitrogen input to urban watersheds from lawn care practices. The variability in the fertilizer N application rates and the factors affecting the application...

La forme de l’espace, des trous noirs à l’Univers chiffonné

CERN Multimedia

CERN. Geneva

2006-01-01

Trous noirs, forme de l’Univers, structure de l’espace-temps… Décrire la forme de notre espace a toujours mis en jeu de nombreux modèles géométriques, chacun impliquant une théorie physique sous-jacente. L'un des grands défis de la physique fondamentale du XXIe siècle est de visualiser la distorsion de l’espace-temps, engendrée par les champs gravitationnels et quantiques. La conférence sera illustrée par de spectaculaires animations issues de simulations d'ordinateur.

The Legacy Effect: Understanding How Segregation and Environmental Injustice Unfold over Time in Baltimore

Science.gov (United States)

Morgan Grove; Laura Ogden; Steward Pickett; Chris Boone; Geoff Buckley; Dexter H. Locke; Charlie Lord; Billy Hall

2018-01-01

Legacies of social and environmental injustices can leave an imprint on the present and constrain transitions for more sustainable futures. In this article, we ask this question: What is the relationship of environmental inequality and histories of segregation? The answer for Baltimore is complex, where past practices of de jure and de facto segregation have created...

Experience Corps Baltimore: Exploring the Stressors and Rewards of High-intensity Civic Engagement.

Science.gov (United States)

Varma, Vijay R; Carlson, Michelle C; Parisi, Jeanine M; Tanner, Elizabeth K; McGill, Sylvia; Fried, Linda P; Song, Linda H; Gruenewald, Tara L

2015-12-01

Experience Corps (EC) represents a high-intensity, intergenerational civic engagement activity where older adults serve as mentors and tutors in elementary schools. Although high-intensity volunteer opportunities are designed to enhance the health and well being of older adult volunteers, little is known about the negative and positive aspects of volunteering unique to intergenerational programs from the volunteer's perspective. Stressors and rewards associated with volunteering in EC were explored in 8 focus group discussions with 46 volunteers from EC Baltimore. Transcripts were coded for frequently expressed themes. Participants reported stressors and rewards within 5 key domains: intergenerational (children's problem behavior, working with and helping children, observing/facilitating improvement or transformation in a child, and developing a special connection with a child); external to EC (poor parenting and children's social stressors); interpersonal (challenges in working with teachers and bonding/making social connections); personal (enjoyment, self-enhancement/achievement, and being/feeling more active); and structural (satisfaction with the structural elements of the EC program). Volunteers experienced unique intergenerational stressors related to children's problem behavior and societal factors external to the EC program. Overall, intergenerational, interpersonal, and personal rewards from volunteering, as well as program structure may have balanced the stress associated with volunteering. A better understanding of stressors and rewards from high-intensity volunteer programs may enhance our understanding of how intergenerational civic engagement volunteering affects well being in later life and may inform project modifications to maximize such benefits for future volunteers and those they serve. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e

Georges Lemaître et la théorie du big bang qu'y avait-t-il au commencement de l'univers ?

CERN Document Server

Landa, Pauline

2015-01-01

Découvrez enfin tout ce qu'il faut savoir sur Georges Lemaître et ses inventions en moins d'une heure !L'origine de l'univers, voilà une problématique qui a tenu en haleine de très nombreux scientifiques. Alors que l'on pourrait croire que l'homme s'est posé cette question depuis la nuit des temps, il n'en est rien. C'est Georges Lemaître, un prêtre belge et grand astrophysicien, qui le premier cherche à dater l'univers et à tenter de découvrir ce qu'il y avait au commencement, alors même que l'ensemble de la communauté scientifique était persuadé qu'il avait toujours exis

Characteristics of Prepared Food Sources in Low-Income Neighborhoods of Baltimore City

OpenAIRE

LEE, SEUNG HEE; ROWAN, MEGAN T.; POWELL, LISA M.; NEWMAN, SARA; KLASSEN, ANN CARROLL; FRICK, KEVIN D.; ANDERSON, JENNIFER; GITTELSOHN, JOEL

2010-01-01

The food environment is associated with obesity risk and diet-related chronic diseases. Despite extensive research conducted on retail food stores, little is known about prepared food sources (PFSs). We conducted an observational assessment of all PFSs (N = 92) in low-income neighborhoods in Baltimore. The most common PFSs were carry-outs, which had the lowest availability of healthy food choices. Only a small proportion of these carry-outs offered healthy sides, whole wheat bread, or entrée ...

WordPress for dummies

CERN Document Server

Sabin-Wilson, Lisa

2014-01-01

The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll

Reciprocating pellet press

Science.gov (United States)

Jones, Charles W.

1981-04-07

A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press

OpenAIRE

Mikosz, Joanna

2016-01-01

In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...

Hotspots and causes of motor vehicle crashes in Baltimore, Maryland: A geospatial analysis of five years of police crash and census data.

Science.gov (United States)

Dezman, Zachary; de Andrade, Luciano; Vissoci, Joao Ricardo; El-Gabri, Deena; Johnson, Abree; Hirshon, Jon Mark; Staton, Catherine A

2016-11-01

Road traffic injuries are a leading killer of youth (aged 15-29) and are projected to be the 7th leading cause of death by 2030. To better understand road traffic crash locations and characteristics in the city of Baltimore, we used police and census data, to describe the epidemiology, hotspots, and modifiable risk factors involved to guide further interventions. Data on all crashes in Baltimore City from 2009 to 2013 were made available from the Maryland Automated Accident Reporting System. Socioeconomic data collected by the US CENSUS 2010 were obtained. A time series analysis was conducted using an ARIMA model. We analyzed the geographical distribution of traffic crashes and hotspots using exploratory spatial data analysis and spatial autocorrelation. Spatial regression was performed to evaluate the impact of socioeconomic indicators on hotspots. In Baltimore City, between 2009 and 2013, there were a total of 100,110 crashes reported, with 1% of crashes considered severe. Of all crashes, 7% involved vulnerable road users and 12% had elderly or youth involvement. Reasons for crashes included: distracted driving (31%), speeding (6%), and alcohol or drug use (5%). After 2010, we observed an increasing trend in all crashes especially from March to June. Distracted driving then youth and elderly drivers were consistently the highest risk factors over time. Multivariate spatial regression model including socioeconomic indicators and controlling for age, gender and population size did not show a distinct predictor of crashes explaining only 20% of the road crash variability, indicating crashes are not geographically explained by socioeconomic indicators alone. In Baltimore City, road traffic crashes occurred predominantly in the high density center of the city, involved distracted driving and extremes of age with an increase in crashes from March to June. There was no association between socioeconomic variables where crashes occurred and hotspots. In depth analysis of

New Homes, New Neighborhoods, New Schools: A Progress Report on the Baltimore Housing Mobility Program

Science.gov (United States)

Engdahl, Lora

2009-01-01

In the Baltimore region, a successful housing mobility program is providing families living in very disadvantaged inner city communities with a new home and a chance for a new life. Minority voucher holders in the federal Housing Choice Voucher Program (formerly titled Section 8) have often been limited to living in "voucher submarkets"…

Evaluation of the National Land Database for Hydrologic Applications in Urban And Suburban Baltimore, Maryland

Science.gov (United States)

Monica Lipscomb Smith; Weiqi Zhou; Mary Cadenasso; J. Morgan Grove; Lawrence. Band

2010-01-01

We compared the National Land Cover Database (NLCD) 2001 land cover, impervious, and canopy data products to land cover data derived from 0.6-m resolution three-band digital imagery and ancillary data. We conducted this comparison at the 1 km2, 9 km2, and gauged watershed scales within the Baltimore Ecosystem Study to...

Si tu devais me dessiner l'Univers

CERN Document Server

Saison-Marsollier, Sandrine; Pralavorio, Corinne; Spiro, Michel; Goldberg, Marc

2015-01-01

Le CERN a lancé en 2014 un concours de dessins dans les classes de primaire des villes des environs : les enfants étaient invités à s’interroger sur l’Univers, la matière et le métier de chercheur. Le succès de l’opération a été tel qu’il a été décidé d’en faire un livre que l’enseignant pourra parcourir en classe avec ses élèves, discuter avec eux des questions et découvrir ensemble les réponses. Le livre est en effet construit ainsi : sur une double page la question que s’est posée l’enfant et le dessin l’illustrant trouvent leur réponse sur la page d’en face, via un court texte écrit par le chercheur référent (Michel Spiro), qu’accompagne une citation tirée du domaine culturel, destinée à montrer les passerelles entre science, littérature et philosophie. Exemples de questions : Qu’y avait-il avant le Big Bang ? Les chercheurs sont-ils des personnes comme les autres ? Pourquoi les lois de la physique ne changent-elles pas ? Peut-on attraper les particules ?...

WordPress For Dummies

CERN Document Server

Sabin-Wilson, Lisa

2011-01-01

The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b

WordPress Bible

CERN Document Server

Brazell, Aaron

2011-01-01

Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media

Socio-Ecological Mechanisms Supporting High Densities of Aedes albopictus (Diptera: Culicidae) in Baltimore, MD.

Science.gov (United States)

Little, E; Biehler, D; Leisnham, P T; Jordan, R; Wilson, S; LaDeau, S L

2017-09-01

Social, ecological, and climatic factors interact creating a heterogeneous matrix that determines the spatiotemporal distribution of mosquitoes and human risks of exposure to the diseases they transmit. We explore linkages between the social and institutional processes behind residential abandonment, urban ecology, and the interactions of socio-ecological processes with abiotic drivers of mosquito production. Specifically, we test the relative roles of infrastructure degradation and vegetation for explaining the presence of Aedes albopictus Skuse 1894 to better predict spatial heterogeneity in mosquito exposure risk within urban environments. We further examine how precipitation interacts with these socially underpinned biophysical variables. We use a hierarchical statistical modeling approach to assess how environmental and climatic conditions over 3 years influence mosquito ecology across a socioeconomic gradient in Baltimore, MD. We show that decaying infrastructure and vegetation are important determinants of Ae. albopictus infestation. We demonstrate that both precipitation and vegetation influence mosquito production in ways that are mediated by the level of infrastructural decay on a given block. Mosquitoes were more common on blocks with greater abandonment, but when precipitation was low, mosquitoes were more likely to be found in higher-income neighborhoods with managed container habitat. Likewise, although increased vegetation was a negative predictor of mosquito infestation, more vegetation on blocks with high abandonment was associated with the largest mosquito populations. These findings indicate that fine spatial scale modeling of mosquito habitat within urban areas is needed to more accurately target vector control. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Beyond urban legends: an emerging framework of urban ecology, as illustrated by the Baltimore Ecosystem Study

Science.gov (United States)

Steward T.A. Pickett; Mary L. Cadenasso; J. Morgan Grove; Peter M. Groffman; Lawrence E. Band; Christopher G. Boone; William R., Jr. Burch; Susan B. Grimmond; John Hom; Jennifer C. Jenkins; Neely L. Law; Charles H. Nilon; Richard V. Pouyat; Katalin Szlavecz; Paige S. Warren; Matthew A. Wilson

2008-01-01

The emerging discipline of urban ecology is shifting focus from ecological processes embedded within cities to integrative studies of large urban areas as biophysical-social complexes. Yet this discipline lacks a theory. Results from the Baltimore Ecosystem Study, part of the Long Term Ecological Research Network, expose new assumptions and test existing assumptions...

Distributions and habitat associations of deep-water corals in Norfolk and Baltimore Canyons, Mid-Atlantic Bight, USA

NARCIS (Netherlands)

Brooke, S.D.; Watts, M.W.; Heil, A.D.; Rhode, M.; Mienis, F.; Duineveld, G.C.A.; Davies, A.J.; Ross, S.W.

2017-01-01

A multi-disciplinary study of two major submarine canyons, Baltimore Canyon and Norfolk Canyon, off the US mid-Atlantic coast focused on the ecology and biology of canyon habitats, particularly those supporting deep-sea corals. Historical data on deep-sea corals from these canyons were sparse with

2011 Information Systems Summit 2 Held in Baltimore, Maryland on April 4-6, 2011

Science.gov (United States)

2011-04-04

SECURE AGILE DEVELOPMENT · Mr. Jeff Payne, CEO and Founder, Coveros, Inc. LEAN AND KANBAN · Mr. Mike Cox, Senior Consultant, Net...Maryland Suite: Annapolis LEAN AND KANBAN Mr. Mike Cox, Senior Consultant, Net Objectives TRACK B Maryland Suite: Baltimore 4:15 pm - 5:15 pm THANK...Innovation to Transform Army Intel 14 Agile © copyright 2011. Net Objectives, Inc. Lean and Kanban Michael Cox Vice President and Senior

News/Press Releases

Data.gov (United States)

Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

Head First WordPress

CERN Document Server

Siarto, Jeff

2010-01-01

Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al

WordPress multisite administration

CERN Document Server

Longren, Tyler

2013-01-01

This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.

Pharmacy-level barriers to implementing expedited partner therapy in Baltimore, Maryland.

Science.gov (United States)

Qin, Jennifer Z; Diniz, Clarissa P; Coleman, Jenell S

2018-05-01

Addressing record high rates of Chlamydia trachomatis incidence in the United States requires the utilization of effective strategies, such as expedited partner therapy, to reduce reinfection and further transmission. Expedited partner therapy, which can be given as a prescription or medication, is a strategy to treat the sexual partners of index patients diagnosed with a sexually transmitted infection without prior medical evaluation of the partners. There are multiple steps in the prescription-expedited partner therapy cascade, and we sought to identify pharmacy-level barriers to implementing prescription-expedited partner therapy for Chlamydia trachomatis treatment. We used spatial analysis and ArcGIS, a geographic information system, to map and assess geospatial access to pharmacies within Baltimore, MD, neighborhoods with the highest rates of Chlamydia trachomatis (1180.25-4255.31 per 100,000 persons). Expedited partner therapy knowledge and practices were collected via a telephone survey of pharmacists employed at retail pharmacies located in these same neighborhoods. Cost of antibiotic medication in US dollars was collected. Census tracts with the highest Chlamydia trachomatis incidence rates had lower median pharmacy density than other census tracts (26.9 per 100,000 vs 31.4 per 100,000, P barriers to implementing prescription-expedited partner therapy. Although most Baltimore pharmacists were unaware of expedited partner therapy, they were generally receptive to learning about and filling expedited partner therapy prescriptions. This finding suggests the need for wide dissemination of educational material targeted to pharmacists. In areas with limited geographic access to pharmacies, expedited partner therapy strategies that do not depend on partners physically accessing a pharmacy merit consideration. Copyright © 2018 Elsevier Inc. All rights reserved.

The Global University Press

Science.gov (United States)

Dougherty, Peter J.

2012-01-01

The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

Hot-pressed geopolymer

DEFF Research Database (Denmark)

Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.

2017-01-01

This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...

US Geological Survey BLM/OCS Baltimore Canyon (Mid-Atlantic) Sediment Analyses (Samples collected 1 July 1975 to 30 June 1976)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains analytical data from samples acquired from the Baltimore Canyon (Mid-Atlantic) area of the Outer Continental Shelf, U.S. East Coast, by the...

Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

Directory of Open Access Journals (Sweden)

Peter Križan

2012-01-01

Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

Teach yourself visually WordPress

CERN Document Server

Majure, Janet

2012-01-01

Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full

Cosmicflows Constrained Local UniversE Simulations

Science.gov (United States)

Sorce, Jenny G.; Gottlöber, Stefan; Yepes, Gustavo; Hoffman, Yehuda; Courtois, Helene M.; Steinmetz, Matthias; Tully, R. Brent; Pomarède, Daniel; Carlesi, Edoardo

2016-01-01

This paper combines observational data sets and cosmological simulations to generate realistic numerical replicas of the nearby Universe. The latter are excellent laboratories for studies of the non-linear process of structure formation in our neighbourhood. With measurements of radial peculiar velocities in the local Universe (cosmicflows-2) and a newly developed technique, we produce Constrained Local UniversE Simulations (CLUES). To assess the quality of these constrained simulations, we compare them with random simulations as well as with local observations. The cosmic variance, defined as the mean one-sigma scatter of cell-to-cell comparison between two fields, is significantly smaller for the constrained simulations than for the random simulations. Within the inner part of the box where most of the constraints are, the scatter is smaller by a factor of 2 to 3 on a 5 h-1 Mpc scale with respect to that found for random simulations. This one-sigma scatter obtained when comparing the simulated and the observation-reconstructed velocity fields is only 104 ± 4 km s-1, I.e. the linear theory threshold. These two results demonstrate that these simulations are in agreement with each other and with the observations of our neighbourhood. For the first time, simulations constrained with observational radial peculiar velocities resemble the local Universe up to a distance of 150 h-1 Mpc on a scale of a few tens of megaparsecs. When focusing on the inner part of the box, the resemblance with our cosmic neighbourhood extends to a few megaparsecs (<5 h-1 Mpc). The simulations provide a proper large-scale environment for studies of the formation of nearby objects.

Análisis de Clima Organizacional de Baltimore Spice C.A.S.A.

OpenAIRE

Wong Carranza, Henry Paul

2004-01-01

Tesis de maestría -- Universidad de Costa Rica. Posgrado en Administración y Dirección de Empresas. Maestría Profesional en Administración y Dirección de Empresas con énfasis en Gerencia, 2004 El objetivo general del trabajo es realizar un diagnóstico de los elementos que inciden e impactan negativamente en el desempeño del clima organizacional de Baltimore Spice C.A.S.A., que se ven reflejados directa e indirectamente en el rendimiento de los colaboradores en el nivel operativo. La organi...

Analysis of Institutional Press Releases and its Visibility in the Press

Directory of Open Access Journals (Sweden)

José Antonio Alcoceba-Hernando, Ph.D.

2010-01-01

Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news

The Mid-Atlantic Engineers: A History of the Baltimore District U.S. Army Corps of Engineers, 1774-1974

Science.gov (United States)

1976-08-01

varied, encom- passing tours of duty on the Savannah River, Georgia; Charleston harbor, South Carolina; Fort Jefferson, Tortugas , Florida; and Fort...7bLtr, Craighill to J. Carey Coale, Chmn, Committee on River and Harbor Approaches, Baltimore Bd of Trade, 21 Mar 1883. Rec Gp 77, entry 969, vo!. VI

The practice of teaching mathematics

OpenAIRE

Hefendehl-Hebeker, Lisa

1998-01-01

The practice of teaching mathematics : experimental conditions of change. - In: The culture of the mathematics classroom / ed. by Falk Seeger .... - Cambridge u.a. : Cambridge Univ. Press, 1998. - S. 104-124

WordPress Top Plugins

CERN Document Server

Corbin, Brandon

2010-01-01

Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

Fasting respiratory exchange ratio and resting metabolic rate as predictors of weight gain : the Baltimore Longitudinal Study on Aging

NARCIS (Netherlands)

Seidell, J C; Muller, D C; Sorkin, J D; Andres, R.

The authors followed 775 men (aged 18-98 years) participating in the Baltimore Longitudinal Study in Aging for an average of ten years. Resting metabolic rate and fasting respiratory exchange ratio (RER) were measured by indirect calorimetry on their first visit and related to subsequent weight

Which Freedom of the Press?

DEFF Research Database (Denmark)

Rytter, Jens Elo

2010-01-01

The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...

Hot-pressing steatite bodies

International Nuclear Information System (INIS)

Aparicio Arroyo, E.

1967-01-01

Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs

Mathematical modelling of wet paper pressing

NARCIS (Netherlands)

Bežanovic, D.

2005-01-01

The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

Characteristics of prepared food sources in low-income neighborhoods of Baltimore City.

Science.gov (United States)

Lee, Seung Hee; Rowan, Megan T; Powell, Lisa M; Newman, Sara; Klassen, Ann Carroll; Frick, Kevin D; Anderson, Jennifer; Gittelsohn, Joel

2010-01-01

The food environment is associated with obesity risk and diet-related chronic diseases. Despite extensive research conducted on retail food stores, little is known about prepared food sources(PFSs). We conducted an observational assessment of all PFSs(N = 92) in low-income neighborhoods in Baltimore. The most common PFSs were carry-outs, which had the lowest availability of healthy food choices. Only a small proportion of these carry-outs offered healthy sides, whole wheat bread, or entrée salads (21.4%, 7.1%, and 33.9%, respectively). These findings suggest that carry-out-specific interventions are necessary to increase healthy food availability in low-income urban neighborhoods.

HIV risk, health, and social characteristics of sexual minority female injection drug users in Baltimore

OpenAIRE

German, Danielle; Latkin, Carl A.

2015-01-01

Female injection drug users {IDU} who report sex with women are at increased risk for HIV and social instability, but it is important to assess whether these disparities also exist according to sexual minority identity rather than behaviorally defined categories. Within a sample of current IDU in Baltimore, about 17% of female study participants (n=307) identified as gay/lesbian/bisexual. In controlled models, sexual minorities were three times as likely to report sex exchange behavior and fo...

Trends in low birth weight infants and changes in Baltimore's childbearing population, 1972–77

OpenAIRE

Strobino, Donna M.

1982-01-01

Linked birth and death records provided the population for a study of trends in low birth weight (LBW) rates in Baltimore between 1972 and 1977 and of the effect of changes in the characteristics of the childbearing population on these trends. The impact of shifts in the birth weight distribution on neonatal mortality rates was also investigated. Trends were analyzed for unstandardized LBW rates as well as for rates standardized on the distributions of maternal age, education, gravidity, prio...

Kirjandusteooria ja ajalookirjutis / Hayden White ; tõlk. Erkki Sivonen, toim. Marek Tamm

Index Scriptorium Estoniae

White, Hayden

2003-01-01

Moodsa kirjandusteooria tähtsusest ajaloo, ajalooteadvuse, ajaloodiskursuse ja ajalookirjutuste teoorias. White, H. Figural realism : studies in the mimesis effect. Baltimore ; London : J. Hopkins University Press : 1999

Students and Teachers Accessing Tomorrow (STAT): Baltimore County Public School's One-to-One Digital Conversion Case in Practice

Science.gov (United States)

Imbriale, Ryan; Schiner, Nicholas; Elmendorf, Douglas

2017-01-01

Baltimore County Public Schools is in the midst of a transformation of teaching and learning; the goal being the creation of student-centered classrooms supported by a one-to-one computer for every student. This transformation, known as Students and Teachers Accessing Tomorrow, began in 2014 and is now in its third academic year. We present this…

Information management in Malawi's prevention of Mother-to-Child ...

African Journals Online (AJOL)

Information Management in Malawi's PMTCT program 306. © 2017 The College of ..... system in Malawi: issues, innovations and results. Oxf Univ Press ... Role of Information and Knowledge Managers: Managers Perspectives. In Barcelona ...

Four Theories of the Press.

Science.gov (United States)

Siebert, Fred S.; And Others

A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

WordPress 3.7 complete

CERN Document Server

Król, Karol

2013-01-01

WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

Neighborhood Effects on Birthweight: An Exploration of Psychosocial and Behavioral Pathways in Baltimore, 1995–1996

OpenAIRE

Schempf, Ashley; Strobino, Donna; O’Campo, Patricia

2008-01-01

Neighborhood characteristics have been proposed to influence birth outcomes through psychosocial and behavioral pathways, yet empirical evidence is lacking. Using data from an urban, low-income sample, this study examined the impact of the neighborhood environment on birthweight and evaluated mediation by psychosocial and behavioral factors. The sample included 726 women who delivered a live birth at Johns Hopkins Hospital in Baltimore, Maryland USA between 1995 and 1996. Census tract data we...

Predicting High School Outcomes in the Baltimore City Public Schools. The Senior Urban Education Research Fellowship Series. Volume VII

Science.gov (United States)

Mac Iver, Martha Abele; Messel, Matthew

2012-01-01

This study of high school outcomes in the Baltimore City Public Schools builds on substantial prior research on the early warning indicators of dropping out. It sought to investigate whether the same variables that predicted a non-graduation outcome in other urban districts--attendance, behavior problems, and course failure--were also significant…

The Language Policy Practice in Mathematics Education in the ...

African Journals Online (AJOL)

kofimereku

mathematics lesson periods in English at the lower primary level. Efforts to use the native language for meaningful mathematics instructions are constrained by teachers' inability to speak the ..... Cambridge: Cambridge Univ. Press, 9-33.

Smashing WordPress Beyond the Blog

CERN Document Server

Hedengren, Thord Daniel

2011-01-01

Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib

Smashing WordPress Beyond the Blog

CERN Document Server

Hedengren, Thord Daniel

2012-01-01

The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to

Responding to the Effects of Extreme Heat: Baltimore City's Code Red Program.

Science.gov (United States)

Martin, Jennifer L

2016-01-01

Heat response plans are becoming increasingly more common as US cities prepare for heat waves and other effects of climate change. Standard elements of heat response plans exist, but plans vary depending on geographic location and distribution of vulnerable populations. Because heat events vary over time and affect populations differently based on vulnerability, it is difficult to compare heat response plans and evaluate responses to heat events. This article provides an overview of the Baltimore City heat response plan, the Code Red program, and discusses the city's response to the 2012 Ohio Valley/Mid Atlantic Derecho, a complex heat event. Challenges with and strategies for evaluating the program are reviewed and shared.

Muscle activation when performing the chest press and shoulder press on a stable bench vs. a Swiss ball.

Science.gov (United States)

Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond

2010-04-01

The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.

Kirjandusteooria ja ajalookirjutis / Hayden White ; tõlk. Erkki Sivonen, toim. Marek Tamm

Index Scriptorium Estoniae

White, Hayden

2003-01-01

Moodsa kirjandusteooria tähtsusest ajaloo, ajalooteadvuse, ajaloodiskursuse ja ajalookirjutuste teoorias. Tõlke allikas: White, H. Figural Realism. Studies in the Mimesis Effect. Baltimore, London : The John Hopkins University Press : 1999

Development of a record retention and retrieval system for the Baltimore Gas and Electric Company

International Nuclear Information System (INIS)

Hoffman, H.L.

1976-01-01

The records associated with the design and construction of a nuclear power plant have increased in both volume and complexity. Baltimore Gas and Electric Company chose to retain and make available these records by using microfilm and a computer-generated index system. The technique of filming, data assembly, and controlled distribution of this material to various locations within the Company was developed and implemented. The index system has been designed to locate information and to provide a basis for searches of the data base for special information

Investing in a Large Stretch Press

Science.gov (United States)

Choate, M.; Nealson, W.; Jay, G.; Buss, W.

1986-01-01

Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

Detection of bearing defects in three-phase induction motors using ...

Indian Academy of Sciences (India)

The results of various studies show that bearing problems ... methods for indication of these faults by use of stator current measurement (Kliman & Stein. 1990 ..... Riddle J 1955 Ball bearing maintenance (Norman, OK: Univ. of Oklohama Press).

AUPress: A Comparison of an Open Access University Press with Traditional Presses

Science.gov (United States)

McGreal, Rory; Chen, Nian-Shing

2011-01-01

This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

Professional WordPress design and development

CERN Document Server

Williams, Brad; Stern, Hal

2014-01-01

The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a

BuddyPress theme development

CERN Document Server

Lister, Tammie

2013-01-01

This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.

From Kisiizi to Baltimore: cultivating knowledge brokers to support global innovation for community engagement in healthcare.

Science.gov (United States)

Ibe, Chidinma A; Basu, Lopa; Gooden, Rachel; Syed, Shamsuzzoha B; Dadwal, Viva; Bone, Lee R; Ephraim, Patti L; Weston, Christine M; Wu, Albert W

2018-02-09

Reverse Innovation has been endorsed as a vehicle for promoting bidirectional learning and information flow between low- and middle-income countries and high-income countries, with the aim of tackling common unmet needs. One such need, which traverses international boundaries, is the development of strategies to initiate and sustain community engagement in health care delivery systems. In this commentary, we discuss the Baltimore "Community-based Organizations Neighborhood Network: Enhancing Capacity Together" Study. This randomized controlled trial evaluated whether or not a community engagement strategy, developed to address patient safety in low- and middle-income countries throughout sub-Saharan Africa, could be successfully applied to create and implement strategies that would link community-based organizations to a local health care system in Baltimore, a city in the United States. Specifically, we explore the trial's activation of community knowledge brokers as the conduit through which community engagement, and innovation production, was achieved. Cultivating community knowledge brokers holds promise as a vehicle for advancing global innovation in the context of health care delivery systems. As such, further efforts to discern the ways in which they may promote the development and dissemination of innovations in health care systems is warranted. Trial Registration Number: NCT02222909 . Trial Register Name: Reverse Innovation and Patient Engagement to Improve Quality of Care and Patient Outcomes (CONNECT). Date of Trial's Registration: August 22, 2014.

Sediment contributions from floodplains and legacy sediments to Piedmont streams of Baltimore County, Maryland

Science.gov (United States)

Donovan, Mitchell; Miller, Andrew; Baker, Matthew; Gellis, Allen

2015-04-01

Disparity between watershed erosion rates and downstream sediment delivery has remained an important theme in geomorphology for many decades, with the role of floodplains in sediment storage as a common focus. In the Piedmont Province of the eastern USA, upland deforestation and agricultural land use following European settlement led to accumulation of thick packages of overbank sediment in valley bottoms, commonly referred to as legacy deposits. Previous authors have argued that legacy deposits represent a potentially important source of modern sediment loads following remobilization by lateral migration and progressive channel widening. This paper seeks to quantify (1) rates of sediment remobilization from Baltimore County floodplains by channel migration and bank erosion, (2) proportions of streambank sediment derived from legacy deposits, and (3) potential contribution of net streambank erosion and legacy sediments to downstream sediment yield within the Mid-Atlantic Piedmont. We calculated measurable gross erosion and deposition rates within the fluvial corridor along 40 valley segments from 18 watersheds with drainage areas between 0.18 and 155 km2 in Baltimore County, Maryland. We compared stream channel and floodplain morphology from lidar-based digital elevation data collected in 2005 with channel positions recorded on 1:2400 scale topographic maps from 1959-1961 in order to quantify 44-46 years of channel change. Sediment bulk density and particle size distributions were characterized from streambank and channel deposit samples and used for volume to mass conversions and for comparison with other sediment sources. Average annual lateral migration rates ranged from 0.04 to 0.19 m/y, which represented an annual migration of 2.5% (0.9-4.4%) channel width across all study segments, suggesting that channel dimensions may be used as reasonable predictors of bank erosion rates. Gross bank erosion rates varied from 43 to 310 Mg/km/y (median = 114) and were

Characterization of particulate and gas exposures of sensitive subpopulations living in Baltimore and Boston.

Science.gov (United States)

Koutrakis, Petros; Suh, Helen H; Sarnat, Jeremy A; Brown, Kathleen Ward; Coull, Brent A; Schwartz, Joel

2005-12-01

Personal exposures to particulate and gaseous pollutants and corresponding ambient concentrations were measured for 56 subjects living in Baltimore, Maryland, and 43 subjects living in Boston, Massachusetts. The 3 Baltimore cohorts consisted of 20 healthy older adults (seniors), 21 children, and 15 individuals with physician-diagnosed chronic obstructive pulmonary disease (COPD*). The 2 Boston cohorts were 20 healthy seniors and 23 children. All children were 9 to 13 years of age; seniors were 65 years of age or older; and the COPD participants had moderate to severe physician-diagnosed COPD. Personal exposures to particulate matter with aerodynamic diameters less than 2.5 microm (PM2.5), sulfate (SO(4)2-), elemental carbon (EC), ozone (03), nitrogen dioxide (NO2), and sulfur dioxide (SO2) were measured simultaneously for 24 hours/day. All subjects were monitored for 8 to 12 consecutive days. The primary objectives of this study were (1) to characterize the personal particulate and gaseous exposures for individuals sensitive to PM health effects and (2) to assess the appropriateness of exposure assessment strategies for use in PM epidemiologic studies. Personal exposures to multiple pollutants and ambient concentrations were measured for subjects from each cohort from each location. Pollutant data were analyzed using correlation and mixed-model regression analyses. In Baltimore, personal PM2.5 exposures tended to be comparable to (and frequently lower than) corresponding ambient concentrations; in Boston, the personal exposures were frequently higher. Overall, personal exposures to the gaseous pollutants, especially O3 and SO2, were considerably lower than corresponding ambient concentrations because of the lack of indoor sources for these gases and their high removal rate on indoor surfaces. Further, the impact of ambient particles on personal exposure (the infiltration factor) and differences in infiltration factor by city, season, and cohort were investigated

Du Burger-King au pavillon. L’illégitimité des univers paradisiaques de l’individu contemporain.

Directory of Open Access Journals (Sweden)

Marc Dumont

2007-10-01

Full Text Available Une fois n’est pas coutume, ce sont cette fois deux types de blogs qui ont retenu l’attention du site du mois : le premier sur l’ univers de la culture fast-food , les seconds constituant une série sur les autoconstructeurs ( Didier et son chantier , puis Autoconstructeur dans la Drôme ainsi qu’ autoconstruction à St Prix — bien d’autres auraient pu être cités, mais le visiteur peut aisément glisser de liens en liens à partir de ces sites. Pavillons, MacDo et blog : ...

Conférence de presse | Press Conference

CERN Multimedia

CERN. Geneva; Bejar Alonso, Isabel

2018-01-01

10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.

WordPress all-in-one for dummies

CERN Document Server

Sabin-Wilson, Lisa

2013-01-01

Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo

Press to compress contaminated wastes drums

International Nuclear Information System (INIS)

Prevost, J.

1993-01-01

This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer

ISS Expedition 08 Press Kit

Data.gov (United States)

National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

Atomes une exploration visuelle de tous les éléments connus dans l'univers

CERN Document Server

Gray, Theodore

2013-01-01

Quelle est leur température critique ? Qu'est-ce que la masse atomique, la densité d'un matériau, l'ordre de remplissage des électrons ? Cet ouvrage invite avec pédagogie et humour à un passionnant voyage au pays des éléments, à partir de leur tableau périodique universel. Soutenue par une exploration visuelle qui montre l'élément à l'état pur mais aussi ses composés et ses applications les plus caractéristiques dans la vie quotidienne, cette approche pratique offre une combinaison parfaite de science chimique et de photographies, qui séduira les lecteurs les plus avertis comme tous les autres habitants sensibles de l'univers.

"I Wish Everyone Had a Library Like This": Year 2 Report on the Baltimore Elementary and Middle School Library Project

Science.gov (United States)

Sheldon, Steven B.; Davis, Marcia H.

2015-01-01

This report focuses on the opening of new school libraries and their impact on schools, teachers and students after two years of implementation of the Baltimore Elementary and Middle School Library Project (Library Project). The findings build on the first report of this project and show that it is not just new facilities, but also the added…

Bullying the media : Cultural and climato-economic readings of press repression versus press freedom

NARCIS (Netherlands)

Van de Vliert, E.

Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A

Geophysics in the public eye

Science.gov (United States)

Papers given at the 1988 AGU Spring Meeting continue to make news. Representatives from 12 magazines, 5 newspapers, 2 wire services, and a TV station used the press room and attended the 6 news conferences. The journalists were attracted to the meeting, held May 16-20 in Baltimore, Md., by 6 press releases mailed out by the AGU public information staff in the 2 months before the meeting. Correspondents from as far as Sweden and Japan joined U.S. reporters from San Francisco, New York, Washington, D.C. and Baltimore.A count of clippings received by June 6 shows that by May 17, the second day of the meeting, newspapers in 36 states had published articles; that translates to a potential readership of 5 million. News clippings are still arriving, so figures are preliminary.

Activation of Selected Core Muscles during Pressing

Directory of Open Access Journals (Sweden)

Thomas W. Nesser

2015-10-01

Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training

OFICINAS SOBRE QUEDAS E ACIDENTES DOMÉSTICOS GERAIS EM PESSOAS IDOSAS NO PROGRAMA UniversIDADE

Directory of Open Access Journals (Sweden)

Jane Kelly Oliveira Friestino

2016-08-01

Full Text Available O envelhecimento é um processo normal do desenvolvimento do ser humano, caracterizado por mudanças fisiológicas (senescência ou patológicas (senilidade. Com o avançar da idade, as comorbidades podem estar presentes no idoso. O desempenho das atividades de vida diária fica prejudicado e, devido a alterações sensório-motoras, cognitivas e psicossociais, aumenta a vulnerabilidade para a ocorrência de quedas e acidentes domésticos, comprometendo a capacidade funcional e podendo levar à morte. O objetivo deste trabalho é apresentar o relato de experiência do oferecimento de oficinas intituladas: “Acidentes domésticos com pessoa idosa: prevenção e ação” a um grupo de idosos participantes de um programa específico para essa faixa etária. As oficinas foram ofertadas como parte do Programa de Extensão Universitária–UniversIDADE de uma Universidade pública do interior de São Paulo. Os encontros da oficina foram realizados entre maio e agosto de 2015, com duração de uma hora cada encontro, totalizando sete encontros. Uma enfermeira e uma fisioterapeuta foram mediadoras voluntárias. Os temas abordados foram: quedas, alterações sensoriais, estratégias de prevenção e ação em acidentes domésticos, queimaduras e hemorragias. Quanto aos resultados das oficinas destacaram-se a participação ativa dos idosos nas discussões dos temas abordados e a relevância dos mesmos para a prevenção dos acidentes domésticos e da ocorrência de queda. Considerou-se importante a atuação dos idosos como agentes multiplicadores das informações adquiridas nas atividades, com extensão aos seus familiares, a outros idosos de seu convívio e para sua própria qualidade de vida. Palavras-chave: Extensão Universitária, Relações Comunidade-Instituição, Acidentes domésticos, Prevenção, Saúde do Idoso.   Workshops on falls and general domestic accidents in elderly people in the UniversIDADE Program Abstract: Aging is a natural

Sediment contributions from floodplains and legacy sediments to Piedmont streams of Baltimore County, Maryland

Science.gov (United States)

Donovan, Mitchell; Miller, Andrew; Baker, Matthew; Gellis, Allen C.

2015-01-01

Disparity between watershed erosion rates and downstream sediment delivery has remained an important theme in geomorphology for many decades, with the role of floodplains in sediment storage as a common focus. In the Piedmont Province of the eastern USA, upland deforestation and agricultural land use following European settlement led to accumulation of thick packages of overbank sediment in valley bottoms, commonly referred to as legacy deposits. Previous authors have argued that legacy deposits represent a potentially important source of modern sediment loads following remobilization by lateral migration and progressive channel widening. This paper seeks to quantify (1) rates of sediment remobilization from Baltimore County floodplains by channel migration and bank erosion, (2) proportions of streambank sediment derived from legacy deposits, and (3) potential contribution of net streambank erosion and legacy sediments to downstream sediment yield within the Mid-Atlantic Piedmont.We calculated measurable gross erosion and deposition rates within the fluvial corridor along 40 valley segments from 18 watersheds with drainage areas between 0.18 and 155 km2 in Baltimore County, Maryland. We compared stream channel and floodplain morphology from lidar-based digital elevation data collected in 2005 with channel positions recorded on 1:2400 scale topographic maps from 1959–1961 in order to quantify 44–46 years of channel change. Sediment bulk density and particle size distributions were characterized from streambank and channel deposit samples and used for volume to mass conversions and for comparison with other sediment sources.Average annual lateral migration rates ranged from 0.04 to 0.19 m/y, which represented an annual migration of 2.5% (0.9–4.4%) channel width across all study segments, suggesting that channel dimensions may be used as reasonable predictors of bank erosion rates. Gross bank erosion rates varied from 43 to 310 Mg/km/y (median = 114) and

Two layer powder pressing

International Nuclear Information System (INIS)

Schreiner, H.

1979-01-01

First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future

Determination of physico-chemical parameters and heavy metals in ...

African Journals Online (AJOL)

EJIRO

African Journal of Environmental Science and Technology Vol. 4(3), pp. 145-148 .... litres rubber bottles, which have been previously washed with 10%. HNO3 and 1:1 HCl for 48 h. .... Handbook of drinking water quality. Indiana Univ. Press pp ...

Association of Walkability With Obesity in Baltimore City, Maryland

Science.gov (United States)

Gittelsohn, Joel; Zonderman, Alan B.; Evans, Michele K.; Gary-Webb, Tiffany L.

2011-01-01

Objectives. To investigate the association between walkability and obesity, we studied adults residing in Baltimore City, Maryland, in neighborhoods of varying racial and socioeconomic composition. Methods. We conducted a cross-sectional study of 3493 participants from the study Healthy Aging in Neighborhoods of Diversity across the Life Span. We used the Pedestrian Environment Data Scan to measure neighborhood walkability in 34 neighborhoods of diverse racial and socioeconomic composition in which the study participants lived. Confirmatory factor analysis was used to determine walkability scores. Multilevel modeling was used to determine prevalence ratios for the association between walkability and obesity. Results. Among individuals living in predominately White and high-socioeconomic status (SES) neighborhoods, residing in highly walkable neighborhoods was associated with a lower prevalence of obesity when compared with individuals living in poorly walkable neighborhoods, after adjusting for individual-level demographic variables (prevalence ratio–[PR] = 0.58; P = walkability and obesity for individuals living in low-SES neighborhoods was not significant after accounting for main mode of transportation (PR = 0.85; P = .060). Conclusions. Future research is needed to determine how differences in associations by neighborhood characteristics may contribute to racial disparities in obesity. PMID:21164099

Chip compacting press; Jido kirikuzu asshukuki

Energy Technology Data Exchange (ETDEWEB)

Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)

1998-08-15

The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.

WordPress web application development

CERN Document Server

Ratnayake, Rakhitha Nimesh

2013-01-01

An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

Professional WordPress Plugin Development

CERN Document Server

Williams, Brad; Tadlock, Justin

2011-01-01

Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic

WordPress 24-Hour Trainer

CERN Document Server

Plumley, George

2011-01-01

The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching

Spatial distribution of metals in soils in Baltimore, Maryland: Role of native parent material, proximity to major roads, housing age and screening guidelines

International Nuclear Information System (INIS)

Yesilonis, I.D.; Pouyat, R.V.; Neerchal, N.K.

2008-01-01

We investigated the spatial distribution of heavy metal above-background (anthropic) contents of Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, Ti, V, and Zn in Baltimore City surface soils and related these levels to potential contaminating sources. Composite soil samples (0-10 cm depth) were digested using a nitric and hydrochloric extraction technique. Slightly more than 10% of plots exceeded United States Environmental Protection Agency screening guidelines for Pb. In a principal component analysis, the first component corresponded to Co, Cr, and Fe, which are constituents of local mafic rocks. The second component corresponded to Cu, Pb, and Zn which were significantly higher within than beyond a 100 m buffer of the major roads within the city; furthermore, Pb and Zn were higher in older residential lots. - Spatial distribution of metals in soils of an older US city (Baltimore) was affected by parent material, proximity to major roads, and housing age

Book Reviews

OpenAIRE

Jan Nederveen Pieterse; Gert Oostindie; Nancy Eberhardt; Niels Mulder; Akira Suehiro; C.L.J. van der Meer; W.A.I.M. Segers; Thomas Lindblad; Jeffrey C. Alexander; L. Laeyendecker; Jowa Imre Kis-Jovak; Nico de Jonge; Thomas Höllman; Huub de Jonge; K. Epskamp

1991-01-01

- Walter E.A. van Beek, Ph. Quarles van Ufford, Religion and development; Towards an integrated approach, Amsterdam: Free University Press, 1988., M. Schoffeleers (eds.) - J.H. de Beer, H.F. Tillema, A journey among the people of Central Borneo in word and picture, edited and with an introduction by Victor T. King, Singapore: Oxford University Press, 1989. 268 pp. - Chris de Beet, Richard Price, Alabi’s world. Baltimore and London: The John Hopkins University Press, 1990. xx + 444 pp. - G. Bo...

A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

Science.gov (United States)

De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

2015-04-15

In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Longue Duree: Indonesia’s Response to the Threat of Jihadist Terrorism 1998-2016

Science.gov (United States)

2016-06-01

Kunkler and Alfred Stepan (New York: Columbia Univ. Press, 2013), 127. 82 Andrew T. H. Tan , “Counter-terrorism in Southeast Asia Post-9/11,” in...chart=overtime&ob=GTDID&o d=desc#results-table. 88 Andrew Tan , “The Persistence of Armed Muslim Rebellion in Southeast Asia: Implications after...Counterinsurgency in Modern War, ed. Scott Nicholas Romaniuk and Stewart Tristan Webb (Boca Raton, FL: CRC Press, 2016), 127. 114 Arabinda Acharya

European Scientific Notes. Volume 37, Number 6.

Science.gov (United States)

1983-06-30

Univ. voir membrane systems or with specially of Mainz, West Germany). shaped devices, essentially linear Dr. F.G. Hutchinson (ICI Pharma - release can...languages, such as Course- of the printing press. writer, TUTOR , and PILOT, are themselves software systems that help educators write courseware. According

Rational Belief.

Science.gov (United States)

1983-05-01

and Feyerabend (1970) have pointed out, such generalizations are, particularly early on, maintained in the face of falsifying evidence. That is, they... Feyerabend , P. (1970) Against method. In Studies in the philosonhy of science, ed. Radner & Winokur, 17-130. Minneapolis: Univ. of Minnesota Press. Finetti

Sensitivities Affecting Heat and Urban Heat Island Effect on Local Scale Projected to Neighborhood Scale in Baltimore, Maryland

Science.gov (United States)

Sze, C.; Zaitchik, B. F.; Scott, A.

2015-12-01

Urban regions are often impacted more by heat than adjacent rural areas, which is a phenomenon known as the urban heat island (UHI) effect. Urban areas are also highly heterogeneous and notoriously difficult to monitor using standard meteorological protocols—the hottest microclimates within a city often occur in locations that lack open, representative installation sites that are an adequate distance from buildings and direct heat sources. To investigate the challenges of monitoring urban heat, this study examines the sensitivity of temperature and humidity sensors currently used in a Baltimore UHI monitoring network to differences in sun exposure, material on which the data collecting instrument is attached, and land cover class of the vicinity. Sensitivity to sun exposure and attachment site can be interpreted as sources of uncertainty for urban heat monitoring, while sensitivity to land cover may reflect a true source of local temperature and humidity variability. In this study, we present results from a test deployment designed to assess the sensitivity of heat measurements to each of these three factors. We then apply these results to interpret measurements taken across the entire Baltimore UHI monitoring network. These results can then be used to improve heat measurements and more accurately represent and quantify the UHI effect on a broader scale, such as in neighborhoods or urban centers.

L'état de plasma le feu de l'Univers

CERN Document Server

Lehner, Thierry

2004-01-01

Dans l'Antiquité, les Grecs considéraient que les constituants du monde dérivaient de quatre éléments essentiels : la terre, l'eau, l'air et le feu. Il n'est pas difficile de voir dans les trois premiers l'équivalent de nos états solide, liquide et gazeux. Mais l'état physique le plus répandu dans l'Univers - correspondant au feu des Anciens - n'est apparu que récemment et n'a été reconnu par la communauté des physiciens qu'en 1928 : c'est le plasma. Cet état très étrange - gazeux, électrique, lumineux, impalpable - reste le plus exotique et le plus inattendu. Il a donné naissance aux trois autres états puisque, à l'exception des éléments ultra-légers que sont l'hydrogène et l'hélium, tous ceux qui constituent notre monde (carbone, oxygène, fer, etc.) sont apparus dans ces fourneaux gigantesques, ces monstres de plasma, qu'étaient les premières étoiles. La vie elle-même en découle par ricochet, ce qui a permis de dire que nous ne sommes que des " poussières d'étoiles ". Décou...

HIV seroconversion among Baltimore City residents tested at a mobile van programme.

Science.gov (United States)

Puryear, Sarah; Burnett, Phyllis; Page, Kathleen R; Muvva, Ravikiran; Chaulk, Patrick; Ghanem, Khalil G; Monroe, Anne

2018-02-01

Many individuals with HIV in the USA are unaware of their diagnosis, and therefore cannot be engaged in treatment services, have worse clinical outcomes and are more likely to transmit HIV to others. Mobile van testing may increase HIV testing and diagnosis. Our objective was to characterise risk factors for HIV seroconversion among individuals using mobile van testing. A case cohort study (n=543) was conducted within an HIV surveillance dataset of mobile van testing users with at least two HIV tests between September 2004 and August 2009 in Baltimore, Maryland. A subcohort (n=423) was randomly selected; all additional cases were added from the parent cohort. Cases (n=122 total, two from random subcohort) had documented seroconversion at the follow-up visit. A unique aspect of the analysis was use of Department of Corrections data to document incarceration between the times of initial and subsequent testing. Multivariate Cox proportional hazards models were used to compare HIV transmission risk factors between individuals who seroconverted and those who did not. One hundred and twenty-two HIV seroconversions occurred among 8756 individuals (1.4%), a rate higher than that in Baltimore City Health Department's STD Clinic clients (1%). Increased HIV seroconversion risk was associated with men who have sex with men (MSM) (HR 32.76, 95% CI 5.62 to 191.12), sex with an HIV positive partner (HR 70.2, 95% CI 9.58 to 514.89), and intravenous drug use (IDU) (HR 5.65, 95% CI 2.41 to 13.23). HIV testing is a crucial first step in the HIV care continuum and an important HIV prevention tool. This study confirmed the need to reach high-risk populations (MSM, sex with HIV-positive individuals, individuals with IDU) and to increase comprehensive prevention services so that high-risk individuals stay HIV uninfected. HIV testing in mobile vans may be an effective outreach strategy for identifying infection in certain populations at high risk for HIV. © Article author(s) (or

Indre spenninger og ytre press

DEFF Research Database (Denmark)

Ibsen, Bjarne

2011-01-01

Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....

WordPress 3 Cookbook

CERN Document Server

Shreves, Ric

2011-01-01

This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.

Greater Baltimore Open Air: an Internet of Things (IoT) approach to citizen science and community-driven climate, air quality, and urban heat island monitoring

Science.gov (United States)

Scott, A.; Kelley, C.; Azdoud, Y.; Ambikapathi, R.; Hobson, M.; Lehman, A.; Ghugare, P.; He, C.; Zaitchik, B. F.; Waugh, D.; McCormack, M.; Baja, K.

2017-12-01

Anthropogenic activities alter the urban surface and surface atmosphere, generating heat and pollutants that have known detrimental impacts on health. Monitoring these environmental variables in urban environments is made difficult by the spatial heterogeneity of urban environments, meaning that two nearby locations may have significantly different temperatures, humidities, or gas concentrations. Thus, urban monitoring often requires more densely placed monitors than current standards or budgets allow. Recent advances in low-cost sensors and Internet of Things (IoT) enabled hardware offer possible solutions. We present an autonomous wireless, open-source, IoT-enabled environmental monitor called a WeatherCube, developed for the Greater Baltimore Open Air project, funded in part by the EPA SmartCity Challenge. The WeatherCube is suitable for urban monitoring and capable of measuring meteorological variables (temperature and humidity) as well as air quality (ozone, nitrogen dioxide, and sulfur dioxide). The WeatherCube devices were built in collaboration with Johns Hopkins University, local government, and community members, including through an innovative job training program. Monitors are hosted by community partners and libraries throughout Baltimore city and surrounding communities. We present the first wave of data collected by the Greater Baltimore Open Air project and compare it to data collected by the Maryland Department of the Environment (MDE). Additionally, we will provide an overview of our experience engaging with the local makers, citizen scientists, and environmental groups to improve their urban environmental monitoring. By developing low-cost devices tailored for urban environmental monitoring, we present an innovative model for both conducting research and community outreach.

WordPress all-in-one for dummies

CERN Document Server

Sabin-Wilson, Lisa; Palmer, Kevin

2011-01-01

A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia

Putting a Spin on Photon Entanglement

Science.gov (United States)

2012-11-15

the renowned ‘ EPR ’ paper questioning the completeness of quantum theory3. In recent decades, with the advent of quantum information science4...780 ( 1935 ). 4. Nielsen, M. A. & Chuang, I. L. Quantum Computation and Quantum Information (Cambridge Univ. Press, 2000). 5. Blinov, B. B., Moehring

Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

International Nuclear Information System (INIS)

Valentine, T.M.; Sambell, R.A.J.

1980-01-01

Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive

Whole grain intake: The Baltimore Longitudinal Study of Aging.

Science.gov (United States)

Maras, Janice E; Newby, P K; Bakun, Peter J; Ferrucci, Luigi; Tucker, Katherine L

2009-02-01

Our objective was to identify major dietary sources of whole grains and to describe the construction of a database of whole grain content of foods. Dietary information was collected with 7-d food records from men and women in the Baltimore Longitudinal Study of Aging, mean age 62.1 +/- 16.0 years, who participated in the dietary assessment portion of the study (n = 1516), and estimates of whole grain intake were obtained from a newly developed database. The Pyramid Servings database and 1994-1996 Continuing Survey of Food Intakes by Individuals (CSFII) recipe ingredients database were then used to calculate both servings and gram weights of whole grain intakes. Mean intakes of whole grains, refined grains, and total grains, as well as frequency of intake for major whole grain food groups and whole grain content for each group, were calculated. Top contributors of whole grains were ready-to-eat breakfast cereals (made with whole grain as well as bran), hot breakfast cereals (made with whole grain), multi-grain bread, and whole wheat bread. While more research is needed to better understand the benefits of whole grains, the development of research tools, including databases to accurately assess whole grain intake, is a critical step in completing such research.

Hezbollah: Psychological Warfare Against Israel

Science.gov (United States)

2009-03-01

Lebanese State” in Political Islam: Essays from the Middle East Report, ed. Joel Beinin and Joe Stork (Berkeley: Univ. of California Press 1997... lyrics : It is my right to defend my land and kick out occupiers; it is my right to declare my freedom and raise a flag for the oppressed; it is my...International Journal of Press/Politics 12 (2007): 43-66. Kfoury, Assaf. "Hizb Allah and the Lebanese State." In Political Islam: Essays from the

Healthcare Provider Contact and Pre-exposure Prophylaxis in Baltimore Men Who Have Sex With Men

Science.gov (United States)

Raifman, Julia R.G.; Flynn, Colin; German, Danielle

2018-01-01

Introduction Pre-exposure prophylaxis (PrEP) safely and effectively prevents HIV in populations at high risk, including men who have sex with men (MSM). PrEP scale-up depends upon primary care providers and community-based organizations (CBOs) sharing PrEP information. This study aimed to determine whether healthcare provider or CBO contact was associated with PrEP awareness among Baltimore MSM. Methods This study used 2014 Baltimore MSM National HIV Behavioral Surveillance data, which included data on health care, HIV and sexually transmitted infection testing, and receipt of condoms from CBOs. In 2015, associations were estimated between healthcare contacts and PrEP awareness through logistic regression models controlling for age, race, and education and clustering by venue. Comparative analyses were conducted with HIV testing as outcome. Results There were 401 HIV-negative participants, of whom 168 (42%) were aware of PrEP. Visiting a healthcare provider in the past 12 months, receiving an HIV test from a provider, and having a sexually transmitted infection test in the past 12 months were not significantly associated with PrEP awareness. PrEP awareness was associated with being out to a healthcare provider (OR = 2.97, 95% CI=1.78, 4.96, p<0.001); being tested for HIV (OR=1.50, 95% CI = 1.06, 2.13, p = 0.023); and receiving condoms from an HIV/AIDS CBO (OR = 2.59, 95% CI = 1.43, 4.64, p = 0.001). By contrast, HIV testing was significantly associated with most forms of healthcare contact. Conclusions PrEP awareness is not associated with most forms of healthcare contact, highlighting the need for guidelines and trainings to support provider discussion of PrEP with MSM. PMID:27662698

Pellet presses for remote fuel fabrication

International Nuclear Information System (INIS)

Densley, P.J.

1978-01-01

Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line

A study of pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing on properties of aluminium/alumina nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Abedinzadeh, Reza; Safavi, Seyed Mohsen; Karimzadeh, Fathallah [Isfahan University, Isfahan (Iran, Islamic Republic of)

2016-05-15

Bulk Al/4wt-%Al{sub 2}O{sub 3} nanocomposites were prepared by consolidating nanocomposite powders using pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing techniques. Microstructural observations revealed that the microwave-assisted hot press sintering at different sintering temperatures of 400.deg.C and 500.deg.C resulted in more densification and smaller grain size for Al/Al{sub 2}O{sub 3} nanocomposite as compared with the conventional hot pressing. Moreover, the application of pressure in microwave sintering process led to more densification and grain growth. Mechanical properties resulting from microhardness and nanoindentation tests were also compared between three-method processed samples. It was found that the microwave-assisted hot-pressed sample exhibited higher hardness and elastic modulus in comparison with microwave-sintered and conventional hot-pressed samples. The improvement in the mechanical properties can be ascribed to lower porosity of microwave-assisted hot-pressed sample.

Accuracy Assessment of Global Barotropic Ocean Tide Models

Science.gov (United States)

2014-08-07

Altimetry, Venice . Cartwright, D. E. (1999), Tides: A Scientific History , Cambridge Univ. Press, New York. Cartwright, D. E., and R. D. Ray (1990), Oceanic...E. Harrison, and D. Stammer, p. 4, ESA Publication WPP-306, Venice , Italy. Book, J. W., H. Perkins, and M. Wimbush (2009), North Adriatic tides

A Description of the Framework of the Atmospheric Boundary Layer Environment (ABLE) Model

Science.gov (United States)

2012-09-01

between soil, urban, vegetation , and/or surface water and the atmosphere and radiation. We seek to fill a gap in Army capabilities by developing a...the Atmosphere; Cambridge Univ. Press, 393 pp, 2010. Wyngaard, J. C. Toward Numerical Modeling in the “ Terra Incognita.” Journal of Atmospheric

Partnering with education and job and training programs for sustainable tobacco control among Baltimore african american young adults.

Science.gov (United States)

Smith, Katherine Clegg; Bone, Lee; Clay, Eric A; Owings, Kerry; Thames, Sean; Stillman, Frances

2009-01-01

Young adults are generally overlooked in tobacco control initiatives, even though they are critical to sustained success. African American young adults who are not in higher education or working are particularly vulnerable to harmful tobacco use, given high smoking rates and limited access to cessation services. Guided by community-based participatory research (CBPR) principles, we sought to identify program and community-level strategies to reduce tobacco use among African American young adults in Baltimore. We describe the challenges and opportunities for integrating effective tobacco control into community-based education and job training programs for unemployed young adults. As part of a longstanding community-research partnership in Baltimore, we conducted fourteen semistructured key informant interviews with leaders from city government and education and job training programs for young adults. The research design, data collection, analysis, and dissemination all included dialogue between and active contribution by both research and community partners. Interview data were structured into opportunities (mindset for change and desire for bonds with a trusted adult), challenges (culture of fatalism, tobacco as a stress reliever, and culture of tobacco use among young adults), and possible tobacco control solutions (tobacco education designed with and for program staff and participants and integration of tobacco issues into holistic program goals and policies). The emergent themes enhance our understanding of how tobacco is situated in the lives of unemployed young adults and the potential for building sustainable, community-based public health solutions.

Spatial distribution of metals in soils in Baltimore, Maryland: role of native parent material, proximity to major roads, housing age and screening guidelines

Science.gov (United States)

I.D. Yesilonis; R.V. Pouyat; N.K. Neerchal

2008-01-01

We investigated the spatial distribution of heavy metal above-background (anthropic) contents of Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, Ti, V, and Zn in Baltimore City surface soils and related these levels to potential contaminating sources. Composite soil samples (0?10 cm depth) were digested using a nitric and hydrochloric extraction technique. Slightly more than 10% of...

Effects of pressing temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy

International Nuclear Information System (INIS)

Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.

2003-01-01

The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)

Where does the neighborhood go? Trust, social engagement, and health among older adults in Baltimore City.

Science.gov (United States)

Garoon, Joshua; Engelman, Michal; Gitlin, Laura; Szanton, Sarah

2016-09-01

Trust is often cited as a necessary predecessor of social engagement, and a public-health good. We question those suppositions through analysis of the life histories of lower-income older adults aging in place in Baltimore. These people desired to continue living independently, but also expressed a complex mix of trust and mistrust in their neighbors, neighborhoods, and broader environments. This was the product of interrelated processes of multilevel physical and social changes over time and space - and, we argue, often featured a "healthy mistrust" that pushed participants to pursue personally meaningful forms of social engagement, whether new or continued. Copyright © 2016 Elsevier Ltd. All rights reserved.

Idealized Compression Ratio for a Screw Briquetting Press

Directory of Open Access Journals (Sweden)

Peter Biath

2012-01-01

Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.

Teach yourself visually complete WordPress

CERN Document Server

Majure, Janet

2013-01-01

Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a

Policing the Void: Recreation, Social Inclusion and the Baltimore Police Athletic League

Directory of Open Access Journals (Sweden)

Jacob J. Bustad

2017-06-01

Full Text Available In this article, we explore the relationship between public recreation policy and planning and the transformation of urban governance in the context of the Police Athletic League centers in Baltimore, Maryland. In light of contemporary discussions of the role of youth programs for sport and physical activity within post-industrial cities, the origination, development, and eventual demise of Baltimore’s network of Police Activity League centers is an instructive, if disheartening, saga. It illustrates the social and political rationales mobilized in justifying recreation policy and programming, the framing of sport and physical activity as preventative measures towards crime and juvenile delinquency, and the precarity of such initiatives given the efficiency-driven orthodoxies of neoliberal urban entrepreneurialism (Harvey, 1989. This analysis emphasizes how the PAL centers were designed to ‘fill the void’ left by a declining system of public recreation, thereby providing an example of a recreation program as part of the “social problems industry” (Pitter & Andrews 1997.

Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature

Science.gov (United States)

Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann

2002-01-01

In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...

Space Physics Strategy-Implementation Study. Volume 1. Goals, objectives, strategy. Report of Workshop 1. Held in Baltimore, Maryland on January 22-26, 1990 (second edition)

International Nuclear Information System (INIS)

1991-04-01

This is the report of Workshop 1, January 22-26, 1990, Baltimore, Maryland. The document includes the Report of the Cosmic and Heliospheric Panel, Report of the Ionosphere-Thermosphere-Mesosphere Panel, Report of the Magnetospheric Physics Panel, Report of the Solar Physics Panel, Report of the Theory Panel

Cultural Resources Inventory of the Montz Freshwater Diversion Project Corridor, St. Charles Parish, Louisiana. Volume 1.

Science.gov (United States)

1986-06-23

o’uisiana. Genealogical Publishing Company, Inc., Baltimore. Din, Gilbert C. (editor) 1917 Louisiana in 1776: A Memoria of Francisco Bouliiney...of Engineers. Shelford, Victor E. 1963 The Ecology of North America. University o- T-IlinoTis Press, Urbana . Sitterson, J. Carlyle 1953 Sugar

Structural Influence on the Mechanical Response of Adolescent Gottingen Porcine Cranial Bone

Science.gov (United States)

2016-10-01

one of the surfaces perpendicular to the loading platen was speckled for DIC. Specimens were loaded using an Instron servo -hydraulic load frame...Cambridge (UK): Cambridge University Press ; 1997. 3. Mow VC, Huiskes R. Basic orthopaedic biomechanics and mechano-biology. Third ed. Baltimore (MD

Aerodynamics Education: Where We’ve Been and Where We’re Going

Science.gov (United States)

2013-06-24

2661. June 1992. 3 Kroo. I.. "Aerodynamic Analyses for Design and Education ... AIAA Paper 92-2664 . . lune 1992. 12 American Institute of Aeronautics...Paper 98-2792 . . lune 1998. 13 Anderson. J.D .. A l-/ist01y <~/Aero<~wwmics. Cambridge Univers ity Press. Cambridge. 1998. 14http

WordPress web design for dummies

CERN Document Server

Sabin-Wilson, Lisa

2013-01-01

Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a

Searching for a Free Press in Indian Country.

Science.gov (United States)

Benton, Sherrole

1994-01-01

Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)

Graphic Arts: Book Three. The Press and Related Processes.

Science.gov (United States)

Farajollahi, Karim; And Others

The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

Properties of hot pressed MgB2/Ti tapes

International Nuclear Information System (INIS)

Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

2009-01-01

Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

The Mediated Amplification of a Crisis: Communicating the A/H1N1 Pandemic in Press Releases and Press Coverage in Europe.

Science.gov (United States)

Rossmann, Constanze; Meyer, Lisa; Schulz, Peter J

2018-02-01

In the aftermath of the A/H1N1 pandemic, health authorities were criticized for failures in crisis communication efforts, and the media were accused of amplifying the pandemic. Considering these criticisms, A/H1N1 provides a suitable case for examining risk amplification processes that may occur in the transfer of information from press releases to print news media during a health crisis. We integrated the social amplification of risk framework with theories of news decisions (news values, framing) in an attempt to contribute to existing research both theoretically and empirically. We conducted a quantitative content analysis of press releases disseminated by health and governmental authorities, as well as the quality and tabloid press in 10 European countries between March 2009 and March 2011. Altogether 243 press releases, 1,243 quality press articles, and 834 tabloid press articles were coded. Consistent with research on news values and framing the results suggest that quality and tabloid papers alike amplified A/H1N1 risks by emphasizing conflict and damage, presenting information in a more dramatized way, and using risk-amplifying frames to a greater extent and risk-attenuating frames to a lesser extent than press releases. To some extent, the quality and tabloid press differed in how risk information was presented. While tabloid press articles seemed to follow the leading quality press with regards to content and framing of health crisis coverage, they exhibited a stronger emphasis on drama and emotion in the way they presented information. © 2017 Society for Risk Analysis.

OAS :: Press Releases

Science.gov (United States)

subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

DSS / Press Room

Science.gov (United States)

Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

OpenAIRE

Georgia Kate Chapman

2015-01-01

This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...

Field Artillery and the Combined Arms Team: A Case for the Continued Relevance of American Fire Support

Science.gov (United States)

2015-05-23

97 Alfred D. Chandler , ed., The Papers of Dwight David Eisenhower, the War Years: II (Baltimore: The John Hopkins Press, 1970), 1111-12...Observer on Guadalcanal.” Field Artillery Journal (August 1943): 563-68. Chandler , Alfred D., ed. The Papers of Dwight David Eisenhower, the War Years

Teenagers as Victims in the Press

Science.gov (United States)

Andersson, Gunvor; Lundstrom, Tommy

2007-01-01

Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

The Poincaré series of a local Gorenstein ring of multiplicity up to 10 ...

Indian Academy of Sciences (India)

As a by-product we prove the rationality of PR for all local, Gorenstein rings of multiplicity at most ..... Due to the choice of α4,...,αn we have. ∑n i=4 αiβi,j ∈ M. Thus aaj ..... [Ma] Matsumura H, Commutative ring theory (Univ. Press: Cambridge) ...

Network Dynamics: Modeling And Generation Of Very Large Heterogeneous Social Networks

Science.gov (United States)

2015-11-23

P11035 (2014). [19] P. L. Krapivsky and S. Redner, Phys. Rev. E. 71, 036118 (2005). [20] M. O. Jackson and B. W. Rogers, Amer. Econ . Rev. 97, 890...P06004 (2010). [24] M. E. J. Newman, Networks: An Introduction (Oxford Univ. Press, Oxford, 2010). [25] P. J. Flory, Principles of Polymer Chemistry

carbon coated copper grids

African Journals Online (AJOL)

PRECIOUS

2009-11-02

Nov 2, 2009 ... Structure, Academic Press Inc (London) Ltd., London. Hemmes JH, Winkler KC, Kool SM (1960). Virus survival as a seasonal factor in influenza and poliomyelitis. Nature, 188: 430-431. Ijaz MK (1985). Studies on the airborne survival of rotaviruses and a human coronavirus. Ph.D. thesis, Univ. of Ottawa, ...

Hot pressing of B4C/SiC composites

International Nuclear Information System (INIS)

Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.

2005-01-01

B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)

Neuropathologic Studies of the Baltimore Longitudinal Study of Aging (BLSA)

Science.gov (United States)

O’Brien, Richard J.; Resnick, Susan M.; Zonderman, Alan B.; Ferrucci, Luigi; Crain, Barbara J.; Pletnikova, Olga; Rudow, Gay; Iacono, Diego; Riudavets, Miguel A.; Driscoll, Ira; Price, Donald L.; Martin, Lee J.; Troncoso, Juan C.

2010-01-01

The Baltimore Longitudinal Study of Aging (BLSA) was established in 1958 and is one the oldest prospective studies of aging in the USA and the world. The BLSA is supported by the National Institute of Aging (NIA) and its mission is to learn what happens to people as they get old and how to sort out changes due to aging and from those due to disease or other causes. In 1986, an autopsy program combined with comprehensive neurologic and cognitive evaluations was established in collaboration with the Johns Hopkins University Alzheimer’s Disease Research Center (ADRC). Since then, 211 subjects have undergone autopsy. Here we review the key clinical neuropathological correlations from this autopsy series. The focus is on the morphological and biochemical changes that occur in normal aging, and the early neuropathological changes of neurodegenerative diseases, especially Alzheimer’s disease (AD). We highlight the combined clinical, pathologic, morphometric, and biochemical evidence of asymptomatic AD, a state characterized by normal clinical evaluations in subjects with abundant AD pathology. We conclude that in some individuals, successful cognitive aging results from compensatory mechanisms that occur at the neuronal level (i.e., neuronal hypertrophy and synaptic plasticity) whereas a failure of compensation may culminate in disease. PMID:19661626

Reference Aid: Glossary of Acronyms, Abbreviations, and Special Terms Used in the Western Europe Romance-Language Press.

Science.gov (United States)

1977-11-25

Artistic Agency for Cultural Exchange (Fr) Ground Forces Tactical Air Support (Fr) Association for the Struggle Against Kidney Diseases (Spa...Union for the New Republic (Fr) National Union of Italian Univer- sity Representa- tives (Ita) Popular Unity (Ita) Peoples Artist Union (Spa...of beiges Societes Luxembourg Luxembour- Gymnastic Socie- geoises de ties (Lux) Gymnastique 124 uso Union Workers Trade Sindical Union (Spa

The small academic press in the land of giants

Directory of Open Access Journals (Sweden)

Frances Pinter

2015-11-01

Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing.  It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing.  'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.

Elbow joint fatigue and bench-press training.

Science.gov (United States)

Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

2014-01-01

Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

High density high-TC ceramic superconductors by hot pressing

International Nuclear Information System (INIS)

Mak, S.; Chaklader, A.C.D.

1989-01-01

High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)

Analgesic and anti-inflammatory effects of Cyphostemma vogelii (Hook

African Journals Online (AJOL)

Rita

2013-04-24

Apr 24, 2013 ... Key words: Analgesic, anti-inflammatory, mice, Cyphostemma vogelii, nociception. ... steroidal anti- inflammatory drugs (NSAIDs) are considered the drugs of ..... 44-55. Hughes H, Lang M (1983). Control of pain in dogs and cats In: Kitchell. R, Erickson H (eds.) Animal pain. Baltimore Waverly press. pp. 207-.

07 Smith 02.pmd

African Journals Online (AJOL)

Owner

23 Jun 2009 ... Londen: W.W. Norton & Company, 514–22,. Goodwin, Sarah Webster. 1993. Romanticism and the ghost of prostitution: Freud, Maria, and “Alice. Fell”, in Goodwin, Sarah Webster & Bronfen, Elisabeth (reds.) Death and Representation. Baltimore en Londen: The John Hopkins University Press, 152–73.

The Influence of the Family on Adolescent Sexual Experience: A Comparison between Baltimore and Johannesburg.

Science.gov (United States)

Mmari, Kristin; Kalamar, Amanda M; Brahmbhatt, Heena; Venables, Emilie

2016-01-01

The main objective of this paper is to understand the role of the family on the sexual experiences of adolescents from urban, disadvantaged settings in Baltimore and Johannesburg. Data were collected as part of the WAVE study, a global study of disadvantaged youth in five cities. Qualitative data were based on key informant interviews, a Photovoice exercise, community mapping, focus groups and in-depth interviews with adolescents. Quantitative data were gathered from an ACASI survey that was administered to approximately 450-500 adolescents per site. Results from the qualitative data revealed that while parents were viewed as important sources of information for sexual and reproductive health, they were often not present in the adolescents' lives. This lack of parental presence was perceived to result in adolescents feeling an overall lack of adult support and guidance. The impact of parental presence and support on adolescent sexual experience was further examined from the quantitative data and revealed a complex picture. In both Baltimore and Johannesburg, female adolescents who were raised by other relatives were less likely to report having had sex compared to those raised by two biological parents, which was not observed for males. In Johannesburg, female adolescents who were paternal orphans were less likely to have had sex compared to non-orphans; the opposite was true among males. Finally, in both sites, female adolescents who had been exposed to violence were more likely to have had sex compared to those who had not; for males, there was no significant relationship. The study demonstrates the powerful influence of both context and gender for understanding the influences of the family on adolescent sexual behaviors. Programs aiming to reduce adolescent sexual risk behaviors the need to understand the complex influences on risk behaviors in different settings and in particular, the role of mothers and fathers. Prevention strategies need to also understand

Internet Marketing with WordPress

CERN Document Server

Mercer, David

2011-01-01

The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se

Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

Science.gov (United States)

Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

2017-02-13

This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

Evaluation of the Coreless Linear Conduction Pump for Thermoelectromagnetic Pumps,

Science.gov (United States)

1991-08-01

pitot -tube type) in the NaK Cart Loop had a range that was not compatible with the pressure head to be developed by the VCLCP. A remotely operated...B.Bleaney, Electricity and Magnetism. 3rd Ed., Oxford Univ. Press 1976. < = > Boeker, Henry G., An Approach to Science. McGraw-Hill, New York 1959

liggaamsmass,a en testesgrootte van afrikaner.. hereford

African Journals Online (AJOL)

Tonometer for measuring testiticular consistency of bulls to pre- dict semen quality. ,tr. Anirn. Sc'i. 29,483. JUBB, K.V.F. & KENNEDY. P.C.. 1970. Pathology of domestic animals. Vol. l. New York and London. Academic. Press. NAUDE, R.T., I9T4.lntensiewe vleisproduksie uit melkrasbeeste. D.Sc. (Agric.)-tesis. Univ. Pretoria.

The association between nutrition transition score and measures of obesity: results from a cross-sectional study among Latina/o immigrants in Baltimore

OpenAIRE

Martínez, Airín D; Juon, Hee-soon; Levine, David M; Lyford-Pike, Victoria; Peters, Sadie

2014-01-01

Background Studies suggest that US Latinos have a higher prevalence of obesity than White Americans. However, obesity may differ by pre-immigration factors and Latinos’ cultural representations of ideal body image. This paper explores whether country of origin’s stage in the nutrition transition is related to Latino immigrants’ BMI category and self-perception of weight. Methods Primary data originated from a cross-sectional questionnaire of Latina/o immigrants in Baltimore in 2011. A conveni...

Denmark, Democracy and the Free Press

DEFF Research Database (Denmark)

Breiting, Søren

2006-01-01

What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....

The Liberal Struggle for Press Freedom

DEFF Research Database (Denmark)

Mogensen, Kirsten

In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....

The Impact of Drainage Network Structure on Flooding in a Small Urban Watershed in Metropolitan Baltimore, MD

Science.gov (United States)

Meierdiercks, K. L.; Smith, J. A.; Miller, A. J.

2006-12-01

The impact of urban development on watershed-scale hydrology is examined in a small urban watershed in the Metropolitan Baltimore area. Analyses focus on Dead Run, a 14.3 km2 tributary of the Gwynns Falls, which is the principal study watershed of the Baltimore Ecosystem Study. Field observations of rainfall and discharge have been collected for storms occurring in the 2003, 2004, and 2005 warm seasons including the flood of record for the USGS Dead Run at Franklintown gage (7 July 2004), in which 5 inches of rain fell in less than 4 hours. Dead Run has stream gages at 6 locations with drainage areas ranging from 1.2 to 14.3 km2. Hydrologic response to storm events varies greatly in each of the subwatersheds due to the diverse development types located there. These subwatersheds range in land use from medium-density residential, with and without stormwater management control, to commercial/light industrial with large impervious lots and an extensive network of stormwater management ponds. The unique response of each subwatershed is captured using field observations in conjunction with the EPA Stormwater Management Model (SWMM), which routes storm runoff over the land surface and through the drainage network of a watershed. Of particular importance to flood response is the structure of the drainage network (both surface channels and storm drain network) and its connectivity to preferential flow paths within the watershed. The Dead Run drainage network has been delineated using geospatial data derived from aerial photography and engineering planning drawings. Model analyses are used to examine the characteristics of flow paths that control flood response in urban watersheds. These analyses aim to identify patterns in urban flow pathways and use those patterns to predict response in other urban watersheds.

1979: The Campus Student Press in America.

Science.gov (United States)

Ingelhart, Louis E.

1979-01-01

Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…

Jatropha press cake as organic fertilizer in lettuce cultivation

Directory of Open Access Journals (Sweden)

José R. Mantovani

Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.

Cold-pressed and hot-pressed rapeseed oil: The effects of roasting and seed moisture on the antioxi- dant activity, canolol, and tocopherol level.

Science.gov (United States)

Siger, Aleksander; Józefiak, Marta; Górnaś, Paweł

2017-01-01

The paper looks at the levels of canolol, tocopherols and antioxidant activity in cold-pressed and hot-pressed rapeseed oils produced from seeds of various moisture levels (5%, 7.5%, and 10%). The paper also considers the effects of seed roasting on the levels of these compounds. The material used for the tests was rapeseed cv. Adrianna. The quality of the oils obtained is determined using peroxide and acid values. The levels of canolol and tocopherols are analyzed using HPLC. The DPPH radical-scavenging activity method for oil samples and phenolic extract from oils was used. It has been demonstrated that the oils produced from rapeseeds with a 5% moisture content, and   in particular from cold-pressed oils, were characterized by the lowest peroxide values. Cold-pressed oils produced from rapeseeds with a 5% moisture content were characterized by higher levels of tocopherols and plastochromanol-8. In the case of hot-pressed oils, the highest levels of tocopherols were found in oils pro- duced from seeds with a 7.5% moisture content, and the greatest amount of PC-8 (more than 4 mg/100 g) was found in oils produced from seeds with a 10% moisture content. Hot-pressed oils have been shown to have higher levels of these compounds than cold-pressed oils. Both roasting and hot pressing led to an increase in the amount of canolol in the oils investigated. When analysing the antioxidant activity of the oils and phenolic extracts it was shown that phenolic compounds are responsible for approx. 10% of total antioxidant activity. Various levels of biologically active compounds were shown to be present in the rapeseed oil obtained from raw materials of a varying moisture content. The type of pressing process (cold-pressing or hot-pressing) and whether the seeds have undergone roasting has also been shown to affect the resulting oil and the level of native antioxidants it contains.

Study of Servo Press with a Flywheel

Science.gov (United States)

Tso, Pei-Lum; Li, Cheng-Ho

The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.

Incarceration and injection drug use in Baltimore, Maryland.

Science.gov (United States)

Genberg, Becky L; Astemborski, Jacquie; Vlahov, David; Kirk, Gregory D; Mehta, Shruti H

2015-07-01

There is limited longitudinal research examining incarceration and subsequent changes in drug use among people who inject drugs (PWID) in the United States. The objective of the current study was to characterize the frequency of incarceration and estimate the association between incarceration and subsequent injection drug use among current and former PWIDs in one US city. ALIVE (AIDS Linked to the Intravenous Experience) is a prospective cohort study of current and former PWIDs, with semi-annual follow-up occurring since 1988. Baltimore, Maryland, USA. A total of 3245 participants with 48 738 study visits were included. Participants enrolled from 1988 to 2012 with a median of 13 follow-up visits per participant (Interquartile range = 7-25). Incarcerations were defined as any self-reported jail or prison stays in the previous 6 months that were ≥7 days or longer. The primary outcome was defined as any self-reported injection drug use in the previous 6 months. At baseline, 29% were female, 90% African American and 33% HIV-positive. Fifty-seven per cent of participants experienced at least one incarceration episode. After adjusting for confounders, there was a positive association between incarceration and subsequent injection drug use [adjusted odds ratio (AOR) = 1.48, 95% confidence interval (CI) = 1.37-1.59]; however, stratified analysis showed that the effect was restricted to those who were not injecting at the time of incarceration (AOR = 2.11, 95% CI = 1.88-2.37). In the United States, incarceration of people who had previously stopped injecting drugs appears to be associated with an increased risk of subsequent injecting. © 2015 Society for the Study of Addiction.

Distal clavicular osteolysis in adults: association with bench pressing intensity

International Nuclear Information System (INIS)

Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

2016-01-01

To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.

Science.gov (United States)

Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L

2012-09-01

To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.

WordPress 24-hour trainer

CERN Document Server

Plumley, George

2015-01-01

Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

Sex Partner Meeting Places Over Time Among Newly HIV-Diagnosed Men Who Have Sex With Men in Baltimore, Maryland.

Science.gov (United States)

Jennings, Jacky M; Reilly, Meredith L; Perin, Jamie; Schumacher, Christina; Sharma, Megha; Safi, Amelia Greiner; Fields, Errol L; Muvva, Ravikiran; Nganga-Good, Carolyn; Chaulk, Patrick

2015-10-01

Sex partner meeting places may be important locales to access men who have sex with men (MSM) and implement targeted HIV control strategies. These locales may change over time, but temporal evaluations have not been performed. The objectives of this study were to describe the frequency of report of MSM sex partner meeting places over time and to compare frequently reported meeting places in the past 5 years and past year among newly HIV-diagnosed MSM in Baltimore City, Maryland. Public health HIV surveillance data including partner services information were obtained for this study from the Baltimore City Health Department from May 2009 to June 2014. A total of 869 sex partner meeting places were reported, including 306 unique places. Bars/clubs (31%) and Internet-based sites (38%) were the most frequently reported meeting place types. Over the 5-year period, the percentage of bars/clubs decreased over time and the percentage of Internet-based sites increased over time. Among bars/clubs, 4 of 5 of those most frequently reported in the past 5 years were also most frequently reported in the most recent year. Among Internet-based sites, 3 of 5 of those most frequently reported in the past 5 years were also in the top 5 most frequently reported in the past year. This study provides a richer understanding of sex partner meeting places reported by MSM over time and information to health departments on types of places to access a population at high risk for HIV transmission.

Direct drive digital servo press with high parallel control

Science.gov (United States)

Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

2013-12-01

Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

Incineration in low-level radioactive waste management at the University of Maryland at Baltimore

International Nuclear Information System (INIS)

Cooley, L.R.

1986-01-01

The selection of an incinerator by the University of Maryland at Baltimore was carried out under a demonstration grant from the Department of Energy (DOE). The system selected is a 300 lb per hour dual-chambered, controlled air incinerator. The cost of the unit was $130,000, excluding installation. The interior is lined with high temperature brick rather than a castable refractory. The burners in the upper and lower chambers are ''oversized'' to insure responsive temperature control of 2.5 million Btu/h in the upper chamber and 1.3 million Btu/h in the lower. The prescribed operating temperatures are 1900 to 2100 0 F in the upper chamber and 900 to 1200 0 F in the lower chamber. The system has a rated capacity of 300 lbs/h of type IV, pathological waste, but operational experience has limited our feed rate to 150 lbs/h

Distal clavicular osteolysis in adults: association with bench pressing intensity

Energy Technology Data Exchange (ETDEWEB)

Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

2016-11-15

To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

Communicators take nine Virginia Press Women awards

OpenAIRE

Owczarski, Mark

2008-01-01

Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.

CSR-communication in the Business Press

DEFF Research Database (Denmark)

Morsing, Mette; Langer, Roy

on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....

bbPress complete

CERN Document Server

Wynne, Rhys

2013-01-01

A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.

A tale of two scales: Evaluating the relationship among life satisfaction, social capital, income, and the natural environment at individual and neighborhood levels in metropolitan Baltimore

Science.gov (United States)

Amanda W. Vemuri; J. Morgan Grove; Matthew A. Wilson; William R. Jr. Burch

2011-01-01

With the rapid growth of cities worldwide, there is a need to better understand factors contributing to life satisfaction in urban environments. Using data from a long-term study of the Baltimore metropolitan region, we build on existing social scientific literature to examine a suite of theoretical factors that have been proposed to explain higher life satisfaction....

Legal Protection To The Infotainment Of Press Development In Indonesia

Directory of Open Access Journals (Sweden)

Anwar Fuadi

2015-08-01

Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.

Concept Design of Movable Beam of Hydraulic Press

Directory of Open Access Journals (Sweden)

Li Yancong

2017-01-01

Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

Fabrication and properties of hot pressed bismuth tungstate

International Nuclear Information System (INIS)

Streicher, W.L.

1978-01-01

Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements

Student Press in American Archives, Fall/Winter 1973-74.

Science.gov (United States)

National Council of Coll. Publications Advisers.

This issue of the "Student Press in America Archives List" contains 100 entries on current issues and information, as well as cases involving student press editors, advisers, student media, and the generic subject of the campus press, emphasizing censorship practices and principles. Information concerning how and where to obtain documents of…

Engaging and Supporting a University Press Scholarly Community

Directory of Open Access Journals (Sweden)

Megan Taylor

2018-03-01

Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.

Hot pressing of B{sub 4}C/SiC composites

Energy Technology Data Exchange (ETDEWEB)

Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O. [Ystanbul Technical University, Faculty of Chemistry and Metallurgy, Materials and Metallurgical Engineering Dept., Maslak-Ystanbul (Turkey)

2005-07-01

B{sub 4}C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B{sub 4}C/SiC composite samples were lower than monolithic B{sub 4}C in all experimental conditions. (authors)

WordPress 3 For Business Bloggers

CERN Document Server

Thewlis, Paul

2011-01-01

This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.

HIV risk, health, and social characteristics of sexual minority female injection drug users in Baltimore

Science.gov (United States)

German, Danielle; Latkin, Carl A.

2015-01-01

Female injection drug users {IDU} who report sex with women are at increased risk for HIV and social instability, but it is important to assess whether these disparities also exist according to sexual minority identity rather than behaviorally defined categories. Within a sample of current IDU in Baltimore, about 17% of female study participants (n=307) identified as gay/lesbian/bisexual. In controlled models, sexual minorities were three times as likely to report sex exchange behavior and four times as likely to report a recent STI. Injection risk did not differ significantly, but sexual minority women reported higher prevalence of socio-economic instability, negative health indicators, and fewer network financial, material, and health support resources. There is a need to identify and address socio-economic marginalization, social support, and health issues among female IDUs who identify as lesbian or bisexual. PMID:25504312

FREEDOM OF PRESS AND JURY TRIAL IN ISTRIA 1848/1849

Directory of Open Access Journals (Sweden)

Dunja Pastović

2015-01-01

Full Text Available In Istria, as a part of the Austrian legal system, jury trial was initially introduced in the revolutionary year of 1848 only for press offenses, in the framework of aspirations for freedom of thought and expression through the press, which represented the most appropriate medium for the dissemination of new ideas and mobilization of the political masses. Trial by jury was supposed to secure impartial and objective trials, which could not be expected of professional judges due to insufficient guarantees of their impartiality. This paper examines the press-related orders and laws passed during 1848 and 1849 which regulated the freedom of press and jury jurisdiction. On the basis of an analysis of the legislative framework, jurisprudence, and the Istrian press during the examined time period, the author has decided that the introduction of the freedom of the press and jury trials for press offenses in 1848/1849 on the territory of Istria didn’t have a large practical significance.

From the Back of the Foxhole: Black Correspondents in World War II. Journalism Monographs, No. 27.

Science.gov (United States)

Stevens, John D.

Black newspapers, like the "Chicago Defender,""The Pittsburgh Courier," and the "Baltimore Afro-American," opened the eyes of Americans to the injustices suffered at home as well as in the armed services. The black press attacked the Navy for its Jim Crowism because when World War II began, the only black sailors were…

Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

Directory of Open Access Journals (Sweden)

Ahmad Reza Zibaei

2016-12-01

Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

Modelling of powder die compaction for press cycle optimization

Directory of Open Access Journals (Sweden)

Bayle Jean-Philippe

2016-01-01

Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.

Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

Directory of Open Access Journals (Sweden)

A. A. Antsifirov

2014-01-01

Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

Baltimore in The Wire and Los Angeles in The Shield: Urban Landscapes in American Drama Series

Directory of Open Access Journals (Sweden)

Alberto N. García

2017-07-01

Full Text Available The Shield (FX 2002-08 and The Wire (HBO 2002-08 are two of the most ever critically acclaimed TV-shows and they both can be seen as the finest developed film noir proposals produced in television. The Wire transcends the cop-show genre by offering a multilayered portrait of the whole city of Baltimore: from police work to drug dealing, getting through stevedores’ union corruption, tricks of local politics, problems of the school system and some unethical journalism practices. On the other, The Shield offers a breathtaking cop-show that features in the foreground the moral ambiguity that characterizes the noir genre. Both series display complementary realist strategies (a neorealist aesthetic in The Wire; a cinéma vérité pastiche in The Shield that highlight the importance of city landscape in their narrative. Baltimore and Los Angeles are portrayed not only as a dangerous and ruined physical places, but are also intertwined with moral and political issues in contemporary cities, such as race, class, political corruption, social disintegration, economical disparities, the limitations of the system of justice, the failure of the American dream and so on. The complex and expanded narrative of The Wire and The Shield, as Dimemberg has written for film noir genre, “remains well attuned to the violently fragmented spaces and times of the late-modern world”. Therefore, this article will focus on how The Wire and The Shield (and some of their TV heirs, such as Southland and Justified reflect and renew several topics related to the city in the film noir tradition: the sociopolitical effects of showing the ruins of the centripetal industrial metropolis, the inferences of filming in actual places, the dramatic presence of what Augé coined as “no-places”, the bachelardian opposition between home and city, or the streets as an urban jungle where danger lurks in every corner.

A multi-stakeholder evaluation of the Baltimore City virtual supermarket program.

Science.gov (United States)

Lagisetty, Pooja; Flamm, Laura; Rak, Summer; Landgraf, Jessica; Heisler, Michele; Forman, Jane

2017-10-23

Increasing access to healthy foods and beverages in disadvantaged communities is a public health priority due to alarmingly high rates of obesity. The Virtual Supermarket Program (VSP) is a Baltimore City Health Department program that uses online grocery ordering to deliver food to low-income neighborhoods. This study evaluates stakeholder preferences and barriers of program implementation. This study assessed the feasibility, sustainability and efficacy of the VSP by surveying 93 customers and interviewing 14 programmatic stakeholders who had recently used the VSP or been involved with program design and implementation. We identified the following themes: The VSP addressed transportation barriers and food availability. The VSP impacted customers and the city by including improving food purchasing behavior, creating a food justice "brand for the city", and fostering a sense of community. Customers appreciated using Supplemental Nutrition Assistance Program (SNAP) benefits to pay for groceries, but policy changes are needed allow online processing of SNAP benefits. This evaluation summarizes lessons learned and serves as a guide to other public health leaders interested in developing similar programs. Provisions in the U.S. Department of Agriculture (USDA) Farm Bill 2014 allow for select grocers to pilot online transactions with SNAP benefits. If these pilots are efficacious, the VSP model could be easily disseminated.

Movement Features Which Describe the Flat Bench Press

Directory of Open Access Journals (Sweden)

Król Henryk

2017-06-01

Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

Myths About Press Freedom

Directory of Open Access Journals (Sweden)

Kaarle Nordenstreng

2007-06-01

Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.

Microplasticity in hot-pressed beryllium

International Nuclear Information System (INIS)

Plane, D.C.; Bonfield, W.

1977-01-01

Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)

News from the Library: PressDisplay on mobile devices!

CERN Multimedia

CERN Library

2013-01-01

You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published.   Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.

Pressing technology for large bottoms

International Nuclear Information System (INIS)

Jilek, L.

1986-01-01

The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)

Auxiliary equipment and special techniques used for hot isostatic pressing

International Nuclear Information System (INIS)

Pfeffer, J.B.; Odebo, U.

1977-01-01

The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press

Strength-ductility relationships in intermediate purity hot-pressed beryllium

International Nuclear Information System (INIS)

Stonehouse, A.J.; Bielawski, C.A.; Paine, R.M.

1977-01-01

The strength of vacuum hot-pressed, intermediate purity beryllium may be substantially increased without sacrifice of the strain capacity of the present grade (S-65) through decrease in the average grain size. Tensile strength of 517 MPa, 0.2% offset yield strength of 414 MPa with minimum 3% tensile elongation in all test directions could be commercially achieved. The tangent modulus of such material is quite attractive and suffers only about 10% degradation from room temperature to 260 0 C. The tangent modulus is dramatically enhanced by the presence of a yield point. The ductility of the materials studied did not appear to be affected by the BeO content across the range of 0.5 to 2.0% using nominal -44 to -15 μm powder particle sizes. All fine-grained pressings exhibited yield points in the as-pressed condition. Either full-density or sub-density hot-pressed billets given a hot isostatic pressing treatment without the use of cans showed only slight yield points after the HIP treatment with essentially the same strength and ductility factors as in the pressed condition. A plot of grain size vs yield strength in the as-pressed condition projects to an intercept with the fracture strength line at about 3 μm grain size. A similar plot after the HIP treatment shows a yield strength line parallel to the fracture strength line with no projected intercept predicting a completely brittle material. (author)

Simulation Model of Automated Peat Briquetting Press Drive

Directory of Open Access Journals (Sweden)

A. A. Marozka

2012-01-01

Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.

Predictor of regulation of uranium dioxide powder pressing process

International Nuclear Information System (INIS)

Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique

2007-01-01

One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)

Type synthesis for 4-DOF parallel press mechanism using GF set theory

Science.gov (United States)

He, Jun; Gao, Feng; Meng, Xiangdun; Guo, Weizhong

2015-07-01

Parallel mechanisms is used in the large capacity servo press to avoid the over-constraint of the traditional redundant actuation. Currently, the researches mainly focus on the performance analysis for some specific parallel press mechanisms. However, the type synthesis and evaluation of parallel press mechanisms is seldom studied, especially for the four degrees of freedom(DOF) press mechanisms. The type synthesis of 4-DOF parallel press mechanisms is carried out based on the generalized function(GF) set theory. Five design criteria of 4-DOF parallel press mechanisms are firstly proposed. The general procedure of type synthesis of parallel press mechanisms is obtained, which includes number synthesis, symmetrical synthesis of constraint GF sets, decomposition of motion GF sets and design of limbs. Nine combinations of constraint GF sets of 4-DOF parallel press mechanisms, ten combinations of GF sets of active limbs, and eleven combinations of GF sets of passive limbs are synthesized. Thirty-eight kinds of press mechanisms are presented and then different structures of kinematic limbs are designed. Finally, the geometrical constraint complexity( GCC), kinematic pair complexity( KPC), and type complexity( TC) are proposed to evaluate the press types and the optimal press type is achieved. The general methodologies of type synthesis and evaluation for parallel press mechanism are suggested.

The regulation of press freedoms (1863-1867

Directory of Open Access Journals (Sweden)

Laurence Coudart

2015-10-01

Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.

Results and problems in the development of machines employed in pressing technology

Energy Technology Data Exchange (ETDEWEB)

Dietrich, P; Hinne, H; Linke, L; Nerger, R

1980-08-01

Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)

Science coverage and the press

International Nuclear Information System (INIS)

Hawkes, N.

1992-01-01

The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)

Design and testing of a solar photovoltaic operated multi-seeds oil press

Energy Technology Data Exchange (ETDEWEB)

Mpagalile, J.J. [Department of Food Science and Technology, Sokoine University of Agriculture, P.O. Box 3006, Morogoro (Tanzania); Hanna, M.A.; Weber, R. [Industrial Agricultural Products Center, University of Nebraska, 209 L.W. Chase Hall, Lincoln, NE 68583-0730 (United States)

2006-10-15

Oil expression tests were conducted to evaluate the performance of a novel oil expeller designed and fabricated to operate on a 200W solar photovoltaic (PV) power system as a sole power source. The oil press was designed to press oilseeds meal with intermediate moisture content of 12+/-1% (w.b.) and 0.5-2mm particle sizes. Freshly grated coconuts and ground peanuts were used to determine the oil expression efficiency of the press. The oilseed samples were pressed for 12min with a maximum pressure of 3.0MPa being reached at 6min of pressing for peanuts and 8min of pressing for coconuts. The pressure was then held for the rest of the pressing time. The press attained an average oil expression efficiency of 73% for coconuts and 70% for peanuts. The force-vs.-deformation studies indicated that peanut press meal was compacted at a higher rate as compared to coconuts. The observation on the energy consumption indicated that there was a significant increase (P<0.05) in the specific energy requirement for both coconuts and peanuts after 6min of pressing, which resulted from the solidification of the press cake. An average specific energy of 36.55 and 20.35Wh/kg was recorded for peanuts and coconuts, respectively, after 12min of pressing. (author)

A superconducting solenoid and press for permanent magnet fabrication

International Nuclear Information System (INIS)

Mulcahy, T. M.; Hull, J. R.

2002-01-01

For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry

Speech Research.

Science.gov (United States)

1979-12-31

629. Mattis, S., French, J. H., & Rapin, I. Dyslexia in children and young adults: Three independent neuropsychological syndromes. Developmental...Knights & D. K. Bakker (Eds.), Neuropsychology ofA learning disorders: Theoretical approaches. Baltimore: University Park Press, 1976. Shankweiler...sounds connected with comfort, discomfort, and hunger . When babbling appears, it is mixed in with cooing but distinguished by its syllable-like

Repercussão da pressão positiva expiratória final na pressão de perfusão cerebral em pacientes adultos com acidente vascular hemorrágico

OpenAIRE

Lima,Wildberg Alencar; Campelo,Antônio Roberto Leite; Gomes,Rodrigo Luís Mousinho; Brandão,Daniella Cunha

2011-01-01

A pressão positiva intratorácica pode levar a alterações hemodinâmicas com repercussão no compartimento intracraniano, alterando a pressão intracraniana e a pressão de perfusão cerebral. Esse efeito pode se tornar mais intenso quando utilizados elevados valores de pressão positiva expiratória final. OBJETIVO: Medir o impacto que diferentes valores de pressão positiva expiratória final causam na pressão intracraniana, na pressão de perfusão cerebral e pressão arterial média. MÉTODO: O estudo f...

Press problem related to nuclear energy news reporting

International Nuclear Information System (INIS)

Arai, Mitsuo

2008-01-01

Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

Directory of Open Access Journals (Sweden)

Georgia Kate Chapman

2015-04-01

Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.

A multi-stakeholder evaluation of the Baltimore City virtual supermarket program

Directory of Open Access Journals (Sweden)

Pooja Lagisetty

2017-10-01

Full Text Available Abstract Background Increasing access to healthy foods and beverages in disadvantaged communities is a public health priority due to alarmingly high rates of obesity. The Virtual Supermarket Program (VSP is a Baltimore City Health Department program that uses online grocery ordering to deliver food to low-income neighborhoods. This study evaluates stakeholder preferences and barriers of program implementation. Methods This study assessed the feasibility, sustainability and efficacy of the VSP by surveying 93 customers and interviewing 14 programmatic stakeholders who had recently used the VSP or been involved with program design and implementation. Results We identified the following themes: The VSP addressed transportation barriers and food availability. The VSP impacted customers and the city by including improving food purchasing behavior, creating a food justice “brand for the city”, and fostering a sense of community. Customers appreciated using Supplemental Nutrition Assistance Program (SNAP benefits to pay for groceries, but policy changes are needed allow online processing of SNAP benefits. Conclusions This evaluation summarizes lessons learned and serves as a guide to other public health leaders interested in developing similar programs. Provisions in the U.S. Department of Agriculture (USDA Farm Bill 2014 allow for select grocers to pilot online transactions with SNAP benefits. If these pilots are efficacious, the VSP model could be easily disseminated.

A press for the theater

Directory of Open Access Journals (Sweden)

Luciana Penna França

2017-12-01

Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.

Planet Press: an EGU initiative to bring geoscientific research to children

Science.gov (United States)

Ferreira, Bárbara

2016-04-01

Planet Press (http://www.egu.eu/education/planet-press/) is an EGU educational project that aims to get children (mainly 7-13 year olds), as well as their parents and educators, interested in and engaged with up-to-date scientific research and news. Planet Press articles are short versions of EGU press releases written in child-friendly language. Because EGU press releases cover research published in the various EGU scientific journals, Planet Press focuses on topics as varied as air pollution, glaciers, climate change, earthquakes, ocean sciences, droughts and floods, or space sciences. The texts are reviewed by both scientists and educators to make sure they are accurate and clear to their target audience. By sharing new and exciting geoscientific research with young kids, we hope to inspire them to develop an interest in the Earth, planetary and space sciences. In this presentation, we describe how the Planet Press idea came about, how the project is run, and the challenges and lessons learnt since the launch of this educational initiative in 2014. Planet Press, which has the support of the EGU Committee on Education, is made possible by the work of volunteer scientists and educators who review and translate the texts. We are grateful for the help of Jane Robb, former EGU Educational Fellow, with launching the project. Planet Press is inspired by Space Scoop (http://www.spacescoop.org/), an initiative by UNAWE, the EU-Universe Awareness organisation, that brings astronomy news to children every week.

Integrated Life-Cycle Framework for Maintenance, Monitoring and Reliability of Naval Ship Structures

Science.gov (United States)

2012-08-15

uncertainty in quantitative risk and policy analysis, Cambridge Univer- sity Press. NEVES, L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic lifetime...L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic life- time-oriented multiobjective optimization of bridge maintenance: single...Wright Aeronautical Laboratory. Wright- Patterson Air Force Base, Dayton, Ohio; 1981. [5| Chung H-Y, Manuel L, Frank KH. Optimal inspection

United States Air Force Summer Faculty Research Program 1989. Program Technical Report. Volume 3

Science.gov (United States)

1989-12-01

351-2807 R. H. Cofer Degree: PhD Professor Specialty: Electrical Eng. Florida Institute Assigned: Avionics Laboratory 150 W. University Blvd. Melbourne ...West University Blvd. Melbourne , FL 32901 407\\768-8000 Ernest Hallford Degree: PhD Assistant Prof. Specialty: Psychology Moorhead State Univ. Assigned...3. Henisch, Heinz K., Semiconductor Contacts: An Approach to Ideas and Models, Oxford, England, Clarendon Press, 1984. 118-15 1989 USAF-UES SUMMER

Toward Determining the Comprehensibility of Machine Translations

Science.gov (United States)

2012-01-01

responses to a stimulus (Macmillan and Creelman , 1991). It has been applied in areas such as lie detection (truth/lie), inspection (ac- ceptable...1-1/(2N) (Macmil- lan and Creelman , 1991). Negative values, which usually indicate response confusion, were eliminated. The results of...Macmillan, Neil and C. Douglas Creelman . (1991). Detection theory: A User’s guide. Cambridge Univer- sity Press, pp. 10 &125. Marchant

Developing an Effective and Efficient Real Time Strategy Agent for Use as a Computer Generated Force

Science.gov (United States)

2010-03-01

Coello, Carlos A., Gary B. Lamont, and David A. Van Veldhuizen . Evolution- ary Algorithms for Solving Multi-Objective Problems (Genetic and...Practice. Oxford Univer- sity Press, 1996. 4. Bakkes, Sander, Philip Kerbusch, Pieter Spronck, and Jaap van den Herik. “Au- tomatically Evaluating...Pieter Spronck, and Jaap van den Herik. “Phase-dependent Evaluation in RTS games”. Proceedings of the 19th Belgian-Dutch Conference on Artificial

Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses

Science.gov (United States)

Zhang, Zhi-Gang; Wang, Li-Ping; Cao, Yan-Ke

2017-11-01

Existing linkage-optimization methods are designed for mechanical presses; few can be directly used for servo presses, so development of the servo press is limited. Based on the complementarity of linkage optimization and motion planning, a phase-division-based linkage-optimization model for a drawing servo press is established. Considering the motion-planning principles of a drawing servo press, and taking account of work rating and efficiency, the constraints of the optimization model are constructed. Linkage is optimized in two modes: use of either constant eccentric speed or constant slide speed in the work segments. The performances of optimized linkages are compared with those of a mature linkage SL4-2000A, which is optimized by a traditional method. The results show that the work rating of a drawing servo press equipped with linkages optimized by this new method improved and the root-mean-square torque of the servo motors is reduced by more than 10%. This research provides a promising method for designing energy-saving drawing servo presses with high work ratings.

Method for hot pressing irregularly shaped refractory articles

Science.gov (United States)

Steinkamp, William E.; Ballard, Ambrose H.

1982-01-01

The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

Modularity of Pressing Tools for Screw Press Producing Solid Biofuels

Directory of Open Access Journals (Sweden)

Miloš Matúš

2012-01-01

Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.

ALUMINUM BOX BUNDLING PRESS

Directory of Open Access Journals (Sweden)

Iosif DUMITRESCU

2015-05-01

Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

Nanoindentation hardness of hot-pressed boron suboxide

International Nuclear Information System (INIS)

Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos

2011-01-01

Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

Press releases — the new trend in science communication

DEFF Research Database (Denmark)

Autzen, Charlotte

2014-01-01

Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses

Science.gov (United States)

X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan

2011-01-01

This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...

Finite element modelling and associated experimentations to optimize and predict the pressing cycle of a future AMBB manufacturing press

International Nuclear Information System (INIS)

Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.

2014-01-01

This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)

Atlas of hot isostatic beryllium powder pressing diagrams

International Nuclear Information System (INIS)

Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.

1995-01-01

Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs

Local and international press digest

CERN Multimedia

2008-01-01

The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.

Pressing and tubes rolling out of tungsten of gas phase deposition

International Nuclear Information System (INIS)

Korolev, Yu.M.; Kosachev, L.S.; Semiletov, S.S.; Solov'ev, V.F.; Sorkin, V.A.

1987-01-01

The possibility of increasing ductility of tubes of tungsten fluoride using heat treatment and plastic deformation- pressing and thermal rolling are studied. When designing the processes of treatment it should be necessarily taken into account that structural state of initial blanks as well as the ratio of deformations in radial and tangential directions under pressing with a rigid needle strongly affects technological properties of pressed tubes. The columnar structure of blanks is undesirable for its embrittlement affects the pressed tubes

Effect of hot isostatic pressing on reaction-bonded silicon nitride

Science.gov (United States)

Watson, G. K.; Moore, T. J.; Millard, M. L.

1984-01-01

Specimens of nearly theoretical density have been obtained through the isostatic hot pressing of reaction-bonded silicon nitride under 138 MPa of pressure for two hours at 1850, 1950, and 2050 C. An amorphous phase that is introduced by the hot isostatic pressing partly accounts for the fact that while room temperature flexural strength more than doubles, the 1200 C flexural strength increases significantly only after pressing at 2050 C.

Treatment of the press residues of pressed grapes on an industrial scale

Energy Technology Data Exchange (ETDEWEB)

1978-04-24

EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.

SURFS: Riding the waves with Synthetic UniveRses For Surveys

Science.gov (United States)

Elahi, Pascal J.; Welker, Charlotte; Power, Chris; Lagos, Claudia del P.; Robotham, Aaron S. G.; Cañas, Rodrigo; Poulton, Rhys

2018-04-01

We present the Synthetic UniveRses For Surveys (SURFS) simulations, a set of N-body/Hydro simulations of the concordance Λ Cold Dark Matter (ΛCDM) cosmology. These simulations use Planck cosmology, contain up to 10 billion particles, and sample scales and halo masses down to 1 kpc and 108 M⊙. We identify and track haloes from z = 24 to today using a state-of-the-art 6D halo finder and merger tree builder. We demonstrate that certain properties of haloes merger trees are numerically converged for haloes composed of ≳100 particles. Haloes smoothly grow in mass, Vmax, with the mass history characterized by log M(a) ∝ exp [-(a/β)α], where a is the scale factor, α(M) ≈ 0.8 & β(M) ≈ 0.024, with these parameters decreasing with decreasing halo mass. Subhaloes follow power-law cumulative mass and velocity functions, i.e. n( > f) ∝ f-α with αM = 0.83 ± 0.01 and α _{V_max}=2.13± 0.03 for mass and velocity, respectively, independent of redshift, as seen in previous studies. The halo-to-halo scatter in amplitude is 0.9 dex. The number of subhaloes in a halo weakly correlates with a halo's concentration c and spin λ:haloes of high c and low λ have 60 per cent more subhaloes than similar mass haloes of low c and high λ. High cadence tracking shows subhaloes are dynamic residents, with 25 per cent leaving their host halo momentarily, becoming a backsplash subhalo, and another 20 per cent changing hosts entirely, in agreement with previous studies. In general, subhaloes have elliptical orbits, e ≈ 0.6, with periods of 2.3^{+2.1}_{-1.7} Gyrs. Subhaloes lose most of their mass at pericentric passage with mass loss rates of ˜ 40 per cent Gyr-1. These catalogues will be made publicly available.

Early to middle Jurassic salt in Baltimore Canyon trough

Science.gov (United States)

McKinney, B. Ann; Lee, Myung W.; Agena, Warren F.; Poag, C. Wylie

2005-01-01

A pervasive, moderately deep (5-6 s two-way traveltime), high-amplitude reflection is traced on multichannel seismic sections over an approximately 7500 km² area of Baltimore Canyon Trough. The layer associated with the reflection is about 25 km wide, about 60 m thick in the center, and thins monotonically laterally, though asymmetrically, at the edges. Geophysical characteristics are compatible with an interpretation of this negative-polarity reflector as a salt lens deposited on the top of a synrift evaporite sequence. However, alternative interpretations of the layer as gas-saturated sediments, an overpressured shale, or a weathered igneous intrusion are also worthy of consideration.Geophysical analyses were made on three wavelet- and true-amplitude processed multichannel seismic dip lines. The lens-shaped layer demarked by the reflection has a velocity of 4.4 km/s; the lens lies within strata having velocities of 5.3 to 5.7 km/s. A trough marking the onset of the lens has an amplitude that is 10 to 20 db greater than reflections from the encasing layers and an apparent reflection coefficient of -0.24. Using amplitude versus offset analysis methods, we determined that observed reflection coefficients, though variable, decrease consistently with respect to increasing offset. Linear inversion yields a low density, about 2.2 g/cc. Integration of one of the true-amplitude-processed lines and one-dimensional modeling of the layer provide data on the impedance contrast and interference patterns that further reinforce the salt lens interpretation.The thin, horizontal salt lens was probably deposited or precipitated during the Jurassic in a shallow, narrow (peripheral) rift basin, as rifting progressed down the North Atlantic margin. Unlike thicker deposits in other areas that deformed and flowed, often into diapir structures, this thin lens has remained relatively undisturbed since deposition.

The Costly Consequences of not Being Socially and Behaviorally Ready to Learn by Kindergarten in Baltimore City.

Science.gov (United States)

Bettencourt, Amie F; Gross, Deborah; Ho, Grace; Perrin, Nancy

2018-02-01

Social, emotional, and behavioral skills are foundational to learning and long-term success. However, poverty and exposure to adverse childhood experiences reduce the chances of children entering kindergarten socially-behaviorally ready to learn. This study examined the unique impact of 5-year-old children (N = 11,412) entering kindergarten not socially-behaviorally ready on three costly school outcomes by fourth grade in Baltimore City Public Schools: being retained in grade, receiving services and supports through an IEP or 504 plan, and being suspended/expelled. Controlling for all other types of school readiness, students not identified as socially-behaviorally ready for kindergarten were more likely to experience all three school outcomes. Findings underscore the importance of early prevention and intervention strategies targeting parents and social-behavioral readiness skills during the first 5 years of life.

Nanoindentation hardness of hot-pressed boron suboxide

Energy Technology Data Exchange (ETDEWEB)

Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)

2011-07-15

Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

Road Bridges and Culverts, MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key Bridge, Bay bridge, Nice Bridge, Published in 2010, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

Data.gov (United States)

NSGIC State | GIS Inventory — Road Bridges and Culverts dataset current as of 2010. MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key...

Forming of AHSS using Servo-Presses

Science.gov (United States)

Groseclose, Adam Richard

Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

Tjekkoslovakisk presse år 2

Directory of Open Access Journals (Sweden)

Rudolf Prevratil

1991-09-01

Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.

Research in theoretical physics. [Henry A. Rowland Dept. of Physics and Astronomy, The Johns Hopkins Univ. , Baltimore, Maryland

Energy Technology Data Exchange (ETDEWEB)

Domokos, G.; Kovesi-Domokos, S.

1992-12-01

Progress made in the following areas is summarized: simulation of extensive air showers induced by interactions existing beyond the currently accepted Standard Model'' of elementary particle interactions; search for physics beyond the Standard Model'' in gluonic inclusive decays of heavy quarks; obtaining limits on the applicability of the special theory of relativity; an improved method of obtaining upper limits on the masses of primaries of extensive air showers associated with point sources in the sky. 8 figs., 1 tab., 73 refs.

A Simplified Model of an Offset Ram Press for Sunflower Oil ...

African Journals Online (AJOL)

This paper presents the theoretical analysis of a simplified model of a ram press. The design of the ram press is based on the classical slider-crank mechanism. A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless ...

Expanded Analysis of Hot Isostatic Pressed Iodine-Loaded Silver-Exchanged Mordenite

Energy Technology Data Exchange (ETDEWEB)

Jubin, R. T. [ORNL; Bruffey, S. H. [ORNL; Patton, K. K. [ORNL

2014-09-30

Reduced silver-exchanged mordenite (Ag0Z) is being evaluated as a potential material to control the release of radioactive iodine that is released during the reprocessing of used nuclear fuel into the plant off-gas streams. The purpose of this study was to determine if hot pressing could directly convert this iodine loaded sorbent into a waste form suitable for long-term disposition. The minimal pretreatment required for production of pressed pellets makes hot pressing a technically and economically desirable process. Initial scoping studies utilized hot uniaxial pressing (HUPing) to prepare samples of non-iodine-loaded reduced silver exchanged mordenite (Ag0Z). The resulting samples were very fragile due to the low pressure (~ 28 MPa) used. It was recommended that hot isostatic pressing (HIPing), performed at higher temperatures and pressures, be investigated. HIPing was carried out in two phases, with a third and final phase currently underway. Phase I evaluated the effects of pressure and temperature conditions on the manufacture of a pressed sample. The base material was an engineered form of silver zeolite. Six samples of Ag0Z and two samples of I-Ag0Z were pressed. It was found that HIPing produced a pressed pellet of high density. Analysis of each pressed pellet by scanning electron microscopy-energy dispersive spectrophotometry (SEM-EDS) and X-ray diffraction (XRD) demonstrated that under the conditions used for pressing, the majority of the material transforms into an amorphous structure. The only crystalline phase observed in the pressed Ag0Z material was SiO2. For the samples loaded with iodine (I-Ag0Z) iodine was present as AgI clusters at low temperatures, and transformed into AgIO4 at high temperatures. Surface mapping and EDS demonstrate segregation between silver iodide phases and silicon dioxide phases. Based on the results of the Phase I study, an expanded test matrix was developed to examine the effects of multiple source materials, compositional

The Ethnic Factor in the Soviet Armed Forces. The Muslim Dimension

Science.gov (United States)

1991-01-01

2Ronald A. Reminick, Theory of Ethnicity: An Anthropologist’s Perspective, Univer- sity Press of America , New York and London, 1983, p. 2; Donald L...South Asia, Africa, and Latin America ). The main reason for the special intensity of inter-ethnic violence in the developing countries stems from the...language policy as it affected the various ethnic groups, see Isabelle T. Kreindler (ed.), Sociolinguistic Perspectives on Soviet National Languages

Bionomics of the Primary Malaria Vector, Anopheles pseudopunctipennis, in the Tapachula Foothill Area of Southern Mexico

Science.gov (United States)

1992-02-04

use of herbicides and genetically manipulated algae contaitting toxic bacteria crystals; e.g., Bacillus rhuringensis israelensis and B. sphoericus (W...Anopheline Complex of Western America. 7. Univ. Cal. Press, Berlceley and Los Angeles. 2. AJvarado CA; Heredia RL.I947. Observaciones Sabre una Nueva ...Guayaquil, ImJRllta de Ia Universidad, Ecuador. 9. Mann F G. 1950. Dos Nuevas Sub-especies del AfIOpheles pseudopunctipennis Th. 1901. Biologica Vm-XI:33

Freedom of the Press In the Scope of Human Rights

Directory of Open Access Journals (Sweden)

Sri Ayu Astuti

2014-01-01

Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the  press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96

A virtual model of the bench press exercise.

Science.gov (United States)

Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

2009-08-07

The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

Microscopic characterizations of membrane electrode assemblies prepared under different hot-pressing conditions

International Nuclear Information System (INIS)

Liang, Z.X.; Zhao, T.S.; Xu, C.; Xu, J.B.

2007-01-01

The durability of the membrane electrode assembly (MEA) for direct methanol fuel cells (DMFCs) is one of the most critical issues to be addressed before widespread commercialization of the DMFC technology. In this work, we investigated the effect of the hot-pressing duration on the performance and durability of the MEA prepared by hot-pressing technique. It was found that the 60-min hot pressing at 135 deg. C under the pressure of 4.0 MPa yielded a significantly improved MEA durability than did the 3-min hot pressing (a typical duration in practice) under the same condition, but no substantial difference was found in the cell performance of the MEAs prepared with the two different hot-pressing durations. The reason why the hot-pressing duration had no significant effect on cell performance is explained based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) characterizations of the changes in the physiochemical properties of MEAs and their constituent components, including the anode, cathode and Nafion membrane, before and after hot pressing with different durations

New Realities for Scholarly Presses in Trying Economic Times

Science.gov (United States)

Blakesley, David

2014-01-01

The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

Corporate social responsibility's discourse in lithuanian business press

OpenAIRE

Marčenkovas, Marius

2014-01-01

The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...

Press/Pulse: Explaining selective terrestrial extinctions at the Cretaceous/Palaeogene boundary

Science.gov (United States)

Arens, Nan Crystal

2010-05-01

Single-cause mass extinction scenarios require extreme conditions to generate sufficiently strong kill mechanisms. Such dire effects are commonly at odds with the taxonomic selectivity that characterizes most extinction events. In response, some researchers have proposed that the interaction of a variety of factors typify episodes of elevated extinction. Previous work (Arens & West 2008 Paleobiology 34:456-471) has shown that a combination of press and pulse disturbances increases the probability of elevated extinction. The press/pulse contrast is borrowed from community ecology, where researchers have long recognized that the ecological response to long-term stress differs from that of an instantaneous catastrophe. Scaled to the macroevolutionary level, press disturbances alter community composition by placing multigenerational stress on populations. Press disturbances do not necessarily cause mortality, but reduce population size by a variety of mechanisms such as curtailed reproduction. Pulse disturbances are sudden catastrophic events that cause extensive mortality. Either press or pulse disturbances of sufficient magnitude can cause extinction, however elevated extinction occurs more commonly during the coincidence of lower-magnitude press and pulse events. The Cretaceous/Palaeogene (K/P) extinction is one of the best examples of a press/pulse extinction. Deccan Trap volcanism, which straddled the K/P boundary, altered atmospheric composition and climate. This episodic volcanism likely contributed to the climate instability observed in terrestrial ecosystems and exerted press stress. Pulse disturbance was produced by bolide impact, which punctuated the end of the Cretaceous. The press/pulse mechanism also more effectively explains selectivity in terrestrial vertebrate and plant extinctions at the K/P boundary than do single-mechanisms scenarios. For example, why do environmentally sensitive vertebrates such as amphibians experience no extinction? And why do

A Low-Cost Auto-Stop Hydraulic Press for Making KBr Disc

Science.gov (United States)

Hon, Ping-Kay

1998-05-01

A hydraulic press fitted with an adjustable torque wrench, together with a stand made of iron bars will form an auto-stop hydraulic press for making KBr disc in IR studies. Total material cost is about $100. All parts are readily available from the local hardware stores. The modified torque wrench is also useful to replace the lever in the standard laboratory press.

A new cleaner process to prepare pressing-powder

Directory of Open Access Journals (Sweden)

Shu, Z.

2011-10-01

Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO₂.

En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

Process Evaluation of a Comprehensive Supermarket Intervention in a Low-Income Baltimore Community.

Science.gov (United States)

Lee, Ryan M; Rothstein, Jessica D; Gergen, Jessica; Zachary, Drew A; Smith, Joyce C; Palmer, Anne M; Gittelsohn, Joel; Surkan, Pamela J

2015-11-01

Supermarket-based interventions are one approach to improving the local food environment and reducing obesity and chronic disease in low-income populations. We implemented a multicomponent intervention that aimed to reduce environmental barriers to healthy food purchasing in a supermarket in Southwest Baltimore. The intervention, Eat Right-Live Well! used: shelf labels and in-store displays promoting healthy foods, sales and promotions on healthy foods, in-store taste tests, increasing healthy food products, community outreach events to promote the intervention, and employee training. We evaluated program implementation through store environment, taste test session, and community event evaluation forms as well as an Employee Impact Questionnaire. The stocking, labeling, and advertising of promoted foods were implemented with high and moderate fidelity. Taste test sessions were implemented with moderate reach and low dose. Community outreach events were implemented with high reach and dose. Supermarket employee training had no significant impact on employees' knowledge, self-efficacy, or behavioral intention for helping customers with healthy purchasing or related topics of nutrition and food safety. In summary, components of this intervention to promote healthy eating were implemented with varying success within a large supermarket. Greater participation from management and employees could improve implementation. © 2015 Society for Public Health Education.

Quid pro quo: tobacco companies and the black press.

Science.gov (United States)

McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

2012-04-01

We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

The Evolution of the International System: Surrender Sovereignty or Fight to the Death

Science.gov (United States)

2011-06-01

8 Robert Wright, Nonzero: The Logic of Human Destiny (New York, NY: First Vintage Books, 2001), 6-7. 9 Kenneth...systems, ecologies, cells, developing embryos , and ant colonies‖ as well as any socially constructed human group.36 Each system is made up of agents...Arnold. Discord and Collaboration. Baltimore, MD: The Johns Hopkins University Press, 1962. Wright, Robert. Nonzero: The Logic of Human Destiny

TA-03-0035 Press Building – D&D

Energy Technology Data Exchange (ETDEWEB)

Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-02

The Press Building was constructed in 1954 with 15,073 ft² of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

Don Quijote et Dulcinea, ou quand l’univers fictionnel interroge la réalité de l’amour

Directory of Open Access Journals (Sweden)

Odile Lasserre Dempure

2009-02-01

Full Text Available Vaste mise en miroir d’une fiction qui n’en finit pas d’interroger son rapport ambigu au réel, le chef d’œuvre de Cervantès place le mouvement dialectique entre univers fictionnel et réalité au cœur même de son écriture. Au sein de cette dialectique, l’amour multiplement fictionnel de don Quichotte pour Dulcinée joue cependant un rôle majeur que ce travail se propose d’examiner. Lieu d’épanouissement privilégié d’un questionnement du rapport entre fiction et réalité, la mise en écriture de cet amour participe en effet de la vaste entreprise de révision des concepts menée par la pensée humaniste : c’est une exploration de la notion même d’amour, de sa réalité, de sa vérité, que permet le voyage au pays de l’amour auquel le Quichotte de Cervantès invite le lecteur.

Health assessment of free-living eastern box turtles (Terrapene carolina carolina) in and around the Maryland Zoo in Baltimore 1996-2011.

Science.gov (United States)

Adamovicz, Laura; Bronson, Ellen; Barrett, Kevin; Deem, Sharon L

2015-03-01

Health data for free-living eastern box turtles (Terrapene carolina carolina) at the Maryland Zoo in Baltimore were analyzed. One hundred and eighteen turtles were captured on or near zoo grounds over the course of 15 yr (1996-2011), with recapture of many individuals leading to 208 total evaluations. Of the 118 individuals, 61 were male, 50 were female, and 7 were of undetermined sex. Of the 208 captures, 188 were healthy, and 20 were sick or injured. Complete health evaluations were performed on 30 turtles with physical examination records, complete blood counts (CBCs), and plasma biochemistry profiles. Eight animals were sampled more than once, yielding 40 total samples for complete health evaluations of these 30 individuals. The 40 samples were divided into healthy (N=29) and sick (N=11) groups based on clinical findings on physical examination. Samples from healthy animals were further divided into male (N=17) and female (N= 12) groups. CBC and biochemistry profile parameters were compared between sick and healthy groups and between healthy males and females. Sick turtles had lower albumin, globulin, total protein (TP), calcium, phosphorous, sodium, and potassium than healthy animals. Sick turtles also had higher heterophil to lymphocyte ratios. Healthy female turtles had higher leukocyte count, eosinophil count, total solids, TP, globulin, cholesterol, calcium, and phosphorous than healthy males. Banked plasma from all 40 samples was tested for antibodies to Mycoplasma agassizii and Mycoplasma testudineum via enzyme-linked immunosorbent assay. One sample from a clinically healthy female was antibody positive for M. agassizii; none were positive for M. testudineum. This study provides descriptive health data for eastern box turtles and CBC and biochemistry profile information for T. carolina carolina at and near the Maryland Zoo in Baltimore. It also reports low serologic evidence of exposure to mycoplasmosis.

A new hot pressing technique

International Nuclear Information System (INIS)

Carcey, J.

1975-01-01

An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr

Easements, MDTA Right of Way Easement, Right of Way Easement, Right of Way Easement on I 95, Fort McHenry Tunnel, Baltimore Harbor tunnel, Francis Scott Key Bridge, Published in 2010, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

Data.gov (United States)

NSGIC State | GIS Inventory — Easements dataset current as of 2010. MDTA Right of Way Easement, Right of Way Easement, Right of Way Easement on I 95, Fort McHenry Tunnel, Baltimore Harbor tunnel,...

Vacuum hot pressing of titanium-alloy powders

International Nuclear Information System (INIS)

Malik, R.K.

1975-01-01

Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements

Hot-pressing steatite bodies; Obtencion de eseatita por prensado en caliente

Energy Technology Data Exchange (ETDEWEB)

Aparicio Arroyo, E

1967-07-01

Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs.

Process design of press hardening with gradient material property influence

International Nuclear Information System (INIS)

Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

2011-01-01

Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

Development of Analysis Tools for Certification of Flight Control Laws

Science.gov (United States)

2009-03-31

In Proc. Conf. on Decision and Control, pages 881-886, Bahamas, 2004. [7] G. Chesi, A. Garulli, A. Tesi , and A. Vicino. LMI-based computation of...Minneapolis, MN, 2006, pp. 117-122. [10] G. Chesi, A. Garulli, A. Tesi . and A. Vicino, "LMI-based computation of optimal quadratic Lyapunov functions...Convex Optimization. Cambridge Univ. Press. Chesi, G., A. Garulli, A. Tesi and A. Vicino (2005). LMI-based computation of optimal quadratic Lyapunov

Direction-specific recruitment of rotator cuff muscles during bench press and row.

Science.gov (United States)

Wattanaprakornkul, Duangjai; Halaki, Mark; Cathers, Ian; Ginn, Karen A

2011-12-01

Recent studies indicate that rotator cuff (RC) muscles are recruited in a reciprocal, direction-specific pattern during shoulder flexion and extension exercises. The main purpose of this study was to determine if similar reciprocal RC recruitment occurs during bench press (flexion-like) and row (extension-like) exercises. In addition, shoulder muscle activity was comprehensively compared between bench press and flexion; row and extension; and bench press and row exercises. Electromyographic (EMG) activity was recorded from 9 shoulder muscles sites in 15 normal volunteers. All exercises were performed at 20, 50 and 70% of subjects' maximal load. EMG data were normalized to standard maximal voluntary contractions. Infraspinatus activity was significantly higher than subscapularis during bench press, with the converse pattern during the row exercise. Significant differences in activity levels were found in pectoralis major, deltoid and trapezius between the bench press and flexion exercises and in lower trapezius between the row and extension exercises. During bench press and row exercises, the recruitment pattern in each active muscle did not vary with load. During bench press and row exercises, RC muscles contract in a reciprocal direction-specific manner in their role as shoulder joint dynamic stabilizers to counterbalance antero-posterior translation forces. Copyright © 2011 Elsevier Ltd. All rights reserved.

Law and the Student Press.

Science.gov (United States)

Stevens, George E.; Webster, John B.

Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

Effect of friction stirring on microstructure in equal channel angular pressed aluminum alloys

Energy Technology Data Exchange (ETDEWEB)

Sato, Y.S.; Urata, M.; Kokawa, H.; Ikeda, K. [Dept. of Materials Processing, Graduate School of Engineering, Tohoku Univ., Aoba-yama, Sendai (Japan)

2003-07-01

Friction stir welding (FSW) was applied to equal channel angular (ECA) pressed aluminum (Al) alloys with high strength and toughness, and the effect of FSW on microstructure and the hardness profile in ECA-pressed alloys was examined. In the weld of ECA-pressed Al alloy 1050 and 5083, the stir zone had roughly the same hardness as the ECA-pressed material, while the hardness was slightly reduced in the thermo-mechanically affected zone (TMAZ). The reduction of hardness in the TMAZ was due to dynamic recovery of dislocation cells of the ECA-pressed material. The addition of Zr to Al suppressed the reduction of hardness in the TMAZ. Consequently, friction stir (FS) weld of Al-Zr alloy retained the hardness of the ECA-pressed material throughout the weld. (orig.)

Factors affecting long-term trends in surface-water quality in the Gwynns Falls watershed, Baltimore City and County, Maryland, 1998–2016

Science.gov (United States)

Majcher, Emily H.; Woytowitz, Ellen L.; Reisinger, Alexander J.; Groffman, Peter M.

2018-03-30

Factors affecting water-quality trends in urban streams are not well understood, despite current regulatory requirements and considerable ongoing investments in gray and green infrastructure. To address this gap, long-term water-quality trends and factors affecting these trends were examined in the Gwynns Falls, Maryland, watershed during 1998–2016 in cooperation with Blue Water Baltimore. Data on water-quality constituents and potential factors of influence were obtained from multiple sources and compiled for analysis, with a focus on data collected as part of the National Science Foundation funded Long-Term Ecological Research project, the Baltimore Ecosystem Study.Variability in climate (specifically, precipitation) and land cover can overwhelm actions taken to improve water quality and can present challenges for meeting regulatory goals. Analysis of land cover during 2001–11 in the Gwynns Falls watershed indicated minimal change during the study time frame; therefore, land-cover change is likely not a factor affecting trends in water quality. However, a modest increase in annual precipitation and a significant increase in winter precipitation were apparent in the region. A higher proportion of runoff producing storms was observed in the winter and a lower proportion in the summer, indicating that climate change may affect water quality in the watershed. The increase in precipitation was not reflected in annual or seasonal trends of streamflow in the watershed. Nonetheless, these precipitation changes may exacerbate the inflow and infiltration of water to gray infrastructure and reduce the effectiveness of green infrastructure. For streamflow and most water-quality constituents examined, no discernable trends were noted over the timeframe examined. Despite the increases in precipitation, no trends were observed for annual or seasonal discharge at the various sites within the study area. In some locations, nitrate, phosphate, and total nitrogen show downward

Using bench press load to predict upper body exercise loads in physically active individuals.

Science.gov (United States)

Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

2013-01-01

This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

Evaluation of pressed shredded empty fruit bunch (EFB)-palm oil ...

African Journals Online (AJOL)

Pressed-shredded empty fruit bunches (EFB) and palm oil mill effluent (POME) anaerobic sludge from a 500 m3 closed anaerobic digester system was utilized for the co-composting treatment. Scanning electron microscopy (SEM) analysis showed that the shredding-pressing treatment on EFB gave better results in ...

Method for hot pressing beryllium oxide articles

Science.gov (United States)

Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

1988-01-01

The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

Science.gov (United States)

Northern Illinois Univ., De Kalb. Suburban Press Research Center.

This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

Engineering work plan for container venting system drill press assembly troubleshooting. Revision 1

International Nuclear Information System (INIS)

Prather, M.C.

1994-11-01

This work plan is for troubleshooting the current CVS drill press to ensure that the drill bit assembly doesn't bind in the press plate. A drill press assembly has been fabricated for the Container Venting System (CVS). The drill bit assembly has bound in the press plate in previous revisions of this design. Initial troubleshooting of the drill press per Rev. 0 of this work plan was performed at the 200W Kaiser Machine Shop under Work Package 2H9401670F, Internal Work Order E20027. The drill press operated without jamming. Then, during the pre-operational test on 11/14/17 and the operational test on 11/17/94, two drum lids were drilled. Immediately after the test on 11/17/94, the drill was again operated, and it jammed. An inspection found shavings at the bottom of the drill bit assembly, between the drill bit sleeve and the press plate bore. This revised work plan provides direction for the machine shop to diagnose and correct this recent problem

WordPress Website Development

OpenAIRE

Lassila, Joonas

2016-01-01

The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...

Optimizing of SPS pressed SrFe12O19 pellets from nano-powder

DEFF Research Database (Denmark)

Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

2015-01-01

direction giving a higher net magnetization. One challenge is to optimize the pressing conditions in order to maximize the remanence and thus the energy product. In present work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle...... size. The powder was pressed using Spark Plasma Syntering (SPS) system at different conditions in order to investigate how the pressing conditions influence the magnetic properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature....... Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using Vibrating Sample Magnetometer. By applying an external magnetic field before pressing, the alignment is heightened...

Reporters on the Battlefield. The Embedded Press System in Historical Context

National Research Council Canada - National Science Library

Paul, Christopher; Kim, James J

2004-01-01

While the history of relations between the press and the military predates modern journalism, much of what had gone before was neutralized by the horrible press-military breakdown that occurred during U.S...

Gauging the Fullness of our Full Spectrum Operations

Science.gov (United States)

2010-05-21

Systems Engineer Peter Checkland , who offered the observation that, “The complexity of problematical situations in real life stems from the fact that...2002), 44. 18 Linn, The Echo of Battle, 5. 19 Ibid., 233-234. 20 Peter Checkland and J. Poulter, Learning for Action: A Short Definitive Account of...Builder, Carl H. The Masks of War: American Styles in Strategy and Analysis. Baltimore, MD: John Hopkins University Press, 1989. Checkland

Yoking Unequal Oxen: Organizing Forces for Dissimilar Missions

Science.gov (United States)

2012-06-01

Warfare Operations,” 19, 33. 32 offered incentive pay for language proficiency, and subjected to new rules for assignments, rotations , and tour... misconception . Each asked for the release of “Vietnamese forces from advanced and static defense positions to permit their future commitment to...2 Walter A. McDougall, The Heavens and the Earth : A Political History of the Space Age (1985; repr., Baltimore, MD: Johns Hopkins University Press

Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism

International Nuclear Information System (INIS)

Halicioglu, R; Dulger, L C; Bozdana, A T

2014-01-01

In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein

Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism

Science.gov (United States)

Halicioglu, R.; Dulger, L. C.; Bozdana, A. T.

2014-03-01

In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein.

Eye-Pressing by Visually Impaired Children.

Science.gov (United States)

Jan, James E.; And Others

1983-01-01

The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

The Law Enforcement of Journalism Profession in The Context of Press Freedom

Directory of Open Access Journals (Sweden)

Sri Ayu Astuti

2014-06-01

Full Text Available Law No. 40 of 1999 on Press is a manifestation of respect for the legal protection of press workers . Press in their role contributes to the intellectual level of the nation, through the information submitted in news publications, as well as bringing stipulated by the 1945 Constitution of Republic of Indonesia on freedom of thought and speech as Human Rights. However, in carrying out their journalistic duties, the Press should have responsibilities in the news process, and must not violate the ethics of his profession. Press that violates profession intentionally or unintentionally in the writing and publication of news in the public sphere, will still do the law enforcement process for any misuse of the meaning of freedom of speech and thought that harm others. Enforcement of this law, in line with the revocation of the right of immunity of profession issued by the Constitutional Court, which means the Press as a Professional must do the job with the precautionary principle, not by carelessness due to the trapped arrogance of jobs, and injuring other people's human rights, even doing work profession with not commendable behavior. How To Cite: Astuti, S. (2014. The Law Enforcement of Journalism Profession in The Context of Press Freedom. Rechtsidee, 1(2, 175-190. doi:http://dx.doi.org/10.21070/jihr.v1i2.97

Research Facility for Mechanical Press Closed Gap Adjuster

Directory of Open Access Journals (Sweden)

A. A. Ancifirov

2016-01-01

Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

The Devotio Moderna and the Printing Press (ca. 1475-1540)

NARCIS (Netherlands)

Goudriaan, K.

2013-01-01

Six presses owned by religious houses belonging to the Devotio Moderna were active during the period 14751540, five of them run by Brethren of the Common Life, the sixth by Regular Canons. The question is raised whether the production of these presses can be correlated with the nature of this

Country-of-origin labeling prior to and at the point of purchase: an exploration of the information environment in Baltimore City grocery stores.

Science.gov (United States)

Lagasse, Lisa P; Love, David C; Smith, Katherine Clegg

2014-01-01

The country-of-origin labeling (COOL) law requires United States grocers to indicate the origin and procurement method (farm-raised or wild-caught) for seafood. This study explored the presentation of COOL on fresh, frozen, packaged, and unpackaged seafood in Baltimore City grocery stores. Eight stores were visited bi-monthly to photograph seafood labels, and circulars were collected weekly from fourteen stores over three months. Ninety-six percent of products were labeled correctly. Forty-eight percent of advertisements included COOL. While in-store labels did not highlight COOL, advertising featured references to domestic and wild-caught seafood, signaling to customers that these are high-value product qualities.

A strategy for improving public confidence of nuclear energy based on the segmentation of stake holders -Focused on Univ. Students, the Opinion Leader in the Next Generation-

International Nuclear Information System (INIS)

Jang, Jenam

2012-01-01

Korea Nuclear Energy Promotion Agency(hereafter, referred as KONEPA) is a public institution established in March, 1992 to improve correct understanding of nuclear energy through development and dissemination of objective, scientific knowledge on the peaceful use of nuclear energy. KONEPA divided the targeted group into four large groups? opinion leaders, civil-social group, LOCA governments, general public/next-generation students/teachers? according to the knowledge levels of nuclear power and involvements in nuclear power plants, and implemented 'customized strategy' suited to the own characteristic of each group. Of these four groups, the next generation, focused on the 'Univ. students' will be discussed with their activities and future plans in this paper

Criticism of the Press: Its Social, Psychological and Political Origins.

Science.gov (United States)

Becker, Lee B.; And Others

This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

Design, manufacture and performance research of double acting hydraulic press

OpenAIRE

Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

1990-01-01

This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

Asynchronous decision making in a memorized paddle pressing task.

Science.gov (United States)

Dankert, James R; Olson, Byron; Si, Jennie

2008-12-01

This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.

Hot and cold pressing of (La,Ce)PO4-based nuclear waste forms

International Nuclear Information System (INIS)

Floran, R.J.; Rappaz, M.; Abraham, M.M.; Boatner, L.A.

1981-01-01

Synthetic analogs of the mineral monazite [(Ce,La,Ca,Th,U)(P,Si)O 4 ] are promising host phases for the isolation of actinide wastes. In the present investigation, the optimal conditions necessary to form high-density, simulated waste pellets from calcined LaPO 4 and CePO 4 powders have been examined. Pellets that are close to the theoretical density are necessary in order to minimize porosity and hence potential avenues along which fluid/waste interactions can take place. Calcined powders prepared by a urea precipitation process were cold pressed and hot pressed under a range of controlled conditions to form coherent, cylindrical pellets. Changes in density were examined as a function of pressure, temperature and duration of sintering. For cold-pressed pellets, a significant increase in density occurs during sintering between 1000 0 C and 1100 0 C. This increase is correlated with substantial grain coarsening of the pellet microstructure. A comparison of cold and hot pressing techniques suggests that, only after sintering, does the density of cold-pressed pellets approach (but not equal) that of the hot-pressed pellets. Densities >90% of the theoretical value of 5.11 g/cm 3 are easily attainable by hot pressing without sintering. The significance of density differences on pellet stability will be investigated in future leaching studies. The apparent advantages of the higher densities achieved by hot pressing must be weighed against the increased technological/engineering complexities involved when working at sustained high temperatures in a remote environment. Thus the cold pressing technique may ultimately prove more practical for large-scale commercial operations

Structure and characteristics of the hot pressed hydroxyapatite/poly-L-lactide composite

Directory of Open Access Journals (Sweden)

Ignjatović Nenad L.

2002-01-01

Full Text Available Hydroxyapatite/poly-L-lactide (HAp/PLL composite biomaterial can be obtained by different processing methods. Three-dimensional blocks of HAp/PLLA composite biomaterial with mechanical characteristics close to the natural bone tissue can be obtained by hot pressing procedure. Effects of synthesis and compacting on the structure and characteristics of the HAp/PLLA composite biomaterial were studied in this work. Using wade angle X-ray structural analyses (WAXS, differentially scanning calorimetry (DSC, thermogravimetric analysis (TGA and infrared (IR spectroscopy, the changes occurring in the material during synthesis and hot pressing were monitored. Surface microstructure was analyzed by scanning electronic microscopy (SEM coupled with electron-dispersion analysis (EDX. The results obtained indicate a possible decrease in the degree of crystallinity with hot pressing time increase. A block of HAp/PLLA composite biomaterial with 1.6 times lower crystallinity of the polymer phase was obtained by hot pressing in a given time interval with a maximum of 60 minutes. Results of TG analysis show that PLLA stability decreases with increasing hot pressing time, and vice versa. IR study proved that neither destructive changes in constituents nor formation of new phases occurred during hot pressing.

Shoulder Muscle Activation of Novice and Resistance Trained Women during Variations of Dumbbell Press Exercises

Science.gov (United States)

Luczak, Joshua; Bosak, Andy; Riemann, Bryan L.

2013-01-01

Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG) activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals (n = 12) and novice female resistance trained exercisers (n = 12) from which average EMG amplitude for each repetition phase (concentric, eccentric) was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases). While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs. PMID:26464884

Shoulder Muscle Activation of Novice and Resistance Trained Women during Variations of Dumbbell Press Exercises

Directory of Open Access Journals (Sweden)

Joshua Luczak

2013-01-01

Full Text Available Previous research has compared the effects of trunk inclination angle on muscle activation using barbells and Smith machines in men. Whether similar effects occur with the use of dumbbells or in women remains unknown. The purpose was to compare upper extremity surface electromyographical (EMG activity between dumbbell bench, incline, and shoulder presses. Dominate arm EMG data were recorded for collegiate-aged female resistance trained individuals ( and novice female resistance trained exercisers ( from which average EMG amplitude for each repetition phase (concentric, eccentric was computed. No significant differences were found between experienced and novice resistance trained individuals. For the upper trapezius and anterior deltoid muscles, shoulder press activation was significantly greater than incline press which in turn was significantly greater than bench press across both phases. The bench and incline presses promoted significantly greater pectoralis major sternal activation compared to the shoulder press (both phases. While pectoralis major clavicular activation during the incline press eccentric phase was significantly greater than both the bench and shoulder presses, activation during the bench press concentric phase promoted significantly greater activation than the incline press which in turn was significantly greater than the shoulder press. These results provide evidence for selecting exercises in resistance and rehabilitation programs.

A new press line concept for conveyor belts; Neues Pressenkonzept fuer Foerdergurte

Energy Technology Data Exchange (ETDEWEB)

Aumueller, Steffen [Siempelkamp Maschinen- und Anlagenbau GmbH und Co. KG, Krefeld (Germany)

2010-06-15

Pressure and temperature are the relevant process parameters for the vulcanisation of rubber products. Particularly, the vulcanisation of large-surface rubber products such as belt conveyors sets large requirements on the mechanical characteristics of the press lines. Siempelkamp Maschinen- und Anlagenbau GmbH and Co. KG (Krefeld, Federal Republic of Germany) is specialized on these requirements. For over 100 years, this company constructs vulcanisation presses for the belt conveyor industry. In the first ten decades, the layout of the press lines according to stiffness and transmission of large forces were in the focus. Till to the late 1980ies, these press lines represented the standard of the belt conveyor industry.

Nonsteroidal anti-inflammatory drugs, aspirin, and cognitive function in the Baltimore longitudinal study of aging.

Science.gov (United States)

Waldstein, Shari R; Wendell, Carrington Rice; Seliger, Stephen L; Ferrucci, Luigi; Metter, E Jeffrey; Zonderman, Alan B

2010-01-01

To examine the relations between the use of nonaspirin, nonsteroidal anti-inflammatory drugs (NSAIDs) and aspirin and age-related change in multiple domains of cognitive function in community-dwelling individuals without dementia. Longitudinal, with measures obtained on one to 18 occasions over up to 45 years. General community. A volunteer sample of up to 2,300 participants from the Baltimore Longitudinal Study of Aging free of diagnosed dementia. At each visit, reported NSAID or aspirin use (yes/no) and tests of verbal and visual memory, attention, perceptuo-motor speed, confrontation naming, executive function, and mental status. Mixed-effects regression models revealed that NSAID use was associated with less prospective decline on the Blessed Information-Memory-Concentration (I-M-C) Test, a mental status test weighted for memory and concentration (Prelated to greater prospective decline on the Blessed I-M-C Test (Pfunction, but on only two cognitive measures. In contrast, aspirin use was associated with greater prospective cognitive decline on select measures, potentially reflecting its common use for vascular disease prophylaxis. Effect sizes were small, calling into question clinical significance, although overall public health significance may be meaningful.

Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

Science.gov (United States)

2012-01-05

Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride

Comparison of concentric and eccentric bench press repetitions to failure.

Science.gov (United States)

Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

2015-04-01

Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

Reducing VOC Press Emission from OSB Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

2001-12-31

Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

Freedom of the Press – two concepts

Directory of Open Access Journals (Sweden)

Markus Meckl

2015-03-01

Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.

Solidification of glass powder by a hydrothermal hot-pressing technique

International Nuclear Information System (INIS)

Nishioka, Mamoru; Yanagisawa, Kazumichi; Yamasaki, Nakamichi

1986-01-01

A borosilicate glass powder was solidified with a NaOH solution or distilled water by the hydrothermal hot-pressing technique. The effect of hydrothermal conditions on the compressive strength was investigated, and the densification mechanism of the glass powder during the hydrothermal hot-pressing was discussed in terms of isothermal shrinkage. The glass powder was successfully solidified by hydrothermal hot-pressing at a reaction temperature lower than that of an ordinary pressure sintering. The solidified body obtained in the presence of distilled water (10 wt%) at 280 deg C had a high compressive strength of about 2300 kg/cm 2 . The analysis of initial densification process of the glass powder in hydrothermal hot-pressing with Murray's rate equation revealed that the densification proceeds both by viscous flow and by rearrangement process. Analysis of the shrinkage rates with a rate equation of hydrothermal reaction suggested that the dissolution of particles into solution controlled the initial densification of the glass powder, and that the alkaline metal acted as a catalyst. (author)

28 CFR 540.64 - Press pools.

Science.gov (United States)

2010-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...

A CONCEPTUAL APPROACH ON PRESS CONFERENCE

Directory of Open Access Journals (Sweden)

Ioana Olariu

2015-07-01

Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.

Bench press exercise: the key points.

Science.gov (United States)

Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

2015-06-01

The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

Microstructural evolution of bainitic steel severely deformed by equal channel angular pressing.

Science.gov (United States)

Nili-Ahmadabadi, M; Haji Akbari, F; Rad, F; Karimi, Z; Iranpour, M; Poorganji, B; Furuhara, T

2010-09-01

High Si bainitic steel has been received much of interest because of combined ultra high strength, good ductility along with high wear resistance. In this study a high Si bainitic steel (Fe-0.22C-2.0Si-3.0Mn) was used with a proper microstructure which could endure severe plastic deformation. In order to study the effect of severe plastic deformation on the microstructure and properties of bainitic steel, Equal Channel Angular Pressing was performed in two passes at room temperature. Optical, SEM and TEM microscopies were used to examine the microstructure of specimens before and after Equal Channel Angular Pressing processing. X-ray diffraction was used to measure retained austenite after austempering and Equal Channel Angular Pressing processing. It can be seen that retained austenite picks had removed after Equal Channel Angular Pressing which could attributed to the transformation of austenite to martensite during severe plastic deformation. Enhancement of hardness values by number of Equal Channel Angular Pressing confirms this idea.

THE LARVAL DEVELOPMENT AND POPULATION DYNAMICS OF ...

African Journals Online (AJOL)

rocks and harbour areas, stippled area denotes beach. Depth contour in m. R ep rod u ced b y Sa b in et G a tew a. y u n d er licen ce gra n ted b y th e P u b ..... and recent ilIhtl1lces with emphosis on plant parasites and soil forms. cds. J. N. Sasser & W. R. Jenkins. Chapel Hill: Univ. North. Carolina Press. R ep rod u ced b.

Untold stories of unfree labor: Asians in the Americas

Directory of Open Access Journals (Sweden)

Aisha Khan

1996-01-01

Full Text Available [First paragraph] The Cuba Commission Report: A Hidden History of the Chinese in Cuba. The Original English-Language Text of 1876 (Introduction by Denise Helly. Baltimore: Johns Hopkins University Press, 1993. viii + 160 pp. (Paper US$21.95 Indentured Labor, Caribbean Sugar: Chinese and Indian Migrants to the British West Indies, 1838-1918. WALTON LOOK LAI. Baltimore: Johns Hopkins University Press, 1993. xxviii + 370 pp. (Cloth US$ 39.95 The world system formed by European mercantile and industrial capitalism and the history of transcontinental labor migrations from Africa to the Americas have been amply documented. The genesis, evolution, and demise of New World slavery are subjects much scrutinized and debated, particularly since the 1960s. Enjoying a less extensive tradition of historiography are the variously devised alternative labor schemes that came on the heels of emancipation: the colonially-orchestrated efforts to contract free and voluntary workers to take the place of slaves in a system of production theoretically the moral antithesis of that earlier "peculiar institution." Yet scholarship on indentured labor systems has consistently revealed that the "freedom" of immigrant workers was merely nominal, the "voluntary" nature of their commitments arguable, and the indenture projects often only ideally a kinder, gentier form of labor extraction.

A comparison of muscle activation between a Smith machine and free weight bench press.

Science.gov (United States)

Schick, Evan E; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Tran, Tai T; Uribe, Brandon P

2010-03-01

The bench press exercise exists in multiple forms including the machine and free weight bench press. It is not clear though how each mode differs in its effect on muscle activation. The purpose of this study was to compare muscle activation of the anterior deltoid, medial deltoid, and pectoralis major during a Smith machine and free weight bench press at lower (70% 1 repetition maximum [1RM]) and higher (90% 1RM) intensities. Normalized electromyography amplitude values were used during the concentric phase of the bench press to compare muscle activity between a free weight and Smith machine bench press. Participants were classified as either experienced or inexperienced bench pressers. Two testing sessions were used, each of which entailed either all free weight or all Smith machine testing. In each testing session, each participant's 1RM was established followed by 2 repetitions at 70% of 1RM and 2 repetitions at 90% of 1RM. Results indicated greater activation of the medial deltoid on the free weight bench press than on the Smith machine bench press. Also, there was greater muscle activation at the 90% 1RM load than at the 70% 1RM load. The results of this study suggest that strength coaches should consider choosing the free weight bench press over the Smith machine bench press because of its potential for greater upper-body muscular development.

Cold pressed versus refined winterized corn oils: quality, composition and aroma

International Nuclear Information System (INIS)

Aydeniz Güneşer, B.; Yılmaz, E.; Ok, S.

2017-01-01

The aims of this study were to characterize and compare cold pressed and fully refined winterized corn oils. Free fatty acidity (FFA), peroxide (PV) and p-anisidin (p-AV) values, saponification number, total carotenoid and phenolic contents of cold pressed corn oils were higher than that of the refined winterized corn oils. Linoleic and oleic acids (approximately 53-54% and 30-31%, respectively) were detected as the major fatty acids in both oil samples. Fifteen different sterols with a majority of β-sitosterol, campesterol, and stigmasterol were quantified in both oil samples. Although phenolic compounds were not quantified in the refined winterized oil samples, some flavonoids (hesperidin, rutin) and phenolic acids (gallic, syringic, rosmaniric and trans-ferulic) were detected in the cold pressed oil samples. This study concludes that cold pressed corn oils could be superior in terms of bioactive compounds but still need some quality improvements for sensory attributes. [es

Effect of pressing temperature on the wear resistance of a Co-based Cr-Mo powder alloy produced by hot pressing

Energy Technology Data Exchange (ETDEWEB)

Somunkiran, Ilyas [Firat Univ., Elazig (Turkey). Metallurgical and Materials Engineering Dept.; Balin, Ahmet [Siirt Univ. (Turkey). Dept. of Vocational High School

2016-02-01

In this study, Co-based Cr-Mo powder alloy was produced at different pressing temperatures by using hot pressing technique and abrasive wear behaviors of the produced specimens were examined. Produced specimens were exposed to abrasive wear experiment using block on disc wear test device by applying a load of 50 N with 100-mesh SiC abrasive paper. Each specimen was investigated at 25, 50, 75 and 100 m. At the end of the experiment, abrasive wear results of the specimens were determined by calculating their mass losses. Microstructural properties of the specimens which were produced at different pressing temperatures were investigated by optical and SEM examinations and their wear resistances were examined by abrasive wear experiments. Consequently, it was observed that in Co-based Cr-Mo powder alloy produced by hot pressing technique; as sintering temperature increased, size of neck formations between the powder grains increased, porosity decreased and abrasive wear resistance increased. [German] In diesem Beitrag zugrunde liegenden Studie wurde eine Co-basierte Cr-Mo-Legierung mittels Heisspressens hergestellt und der Abrasivverschleisswiderstand dieser Proben untersucht. Die hergestellten Proben wurden dem Abrasivverschleissversuch durch einen Block-Scheibe-Versuchsaufbau unterzogen, wobei eine Kraft von 50 N mit einem SiC-Papier (100 mesh) verwendet wurde. Jede Probe wurde ueber eine Distanz von 25, 50, 75 und 100 m untersucht. Am Ende der jeweiligen Experimente wurden die Abrasivverschleissergebnisse ermittelt, indem die Massenverluste berechnet wurden. Die mikrostrukturellen Eigenschaften der Proben, die bei verschiedenen Presstemperaturen hergestellt wurden, wurden mittels optischer und Rasterelektronenmikroskopie bestimmt und ihr Verschleisswiderstand anhand der Verschleissversuche ermittelt. Schliesslich wurde beobachtet, dass bei steigender Sintertemperatur der heissgespressten Co-basierten Cr-Mo-Pulverlegierung die Groesse der Einschnuerungen zwischen den

Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

Microstructural analysis of hot press formed 22MnB5 steel

Science.gov (United States)

Aziz, Nuraini; Aqida, Syarifah Nur; Ismail, Izwan

2017-10-01

This paper presents a microstructural study on hot press formed 22MnB5 steel for enhanced mechanical properties. Hot press forming process consists of simultaneous forming and quenching of heated blank. The 22MnB5 steel was processed at three different parameter settings: quenching time, water temperature and water flow rate. 22MnB5 was processed using 33 full factorial design of experiment (DOE). The full factorial DOE was designed using three factors of quenching time, water temperature and water flow rate at three levels. The factors level were quenching time range of 5 - 11 s, water temperature; 5 - 27°C and water flow rate; 20 - 40 L/min. The as-received and hot press forming processed steel was characterised for metallographic study and martensitic structure area percentage using JEOL Field Emission Scanning Electron Microscopic (FESEM). From the experimental finding, the hot press formed 22MnB5 steel consisted of 50 to 84% martensitic structure area. The minimum quenching time of 8 seconds was required to obtain formed sample with high percentage of martensite. These findings contribute to initial design of processing parameters in hot press forming of 22MnB5 steel blanks for automotive component.

Six-axis multi-anvil press for high-pressure, high-temperature neutron diffraction experiments

Energy Technology Data Exchange (ETDEWEB)

Sano-Furukawa, A., E-mail: sano.asami@jaea.go.jp; Hattori, T. [Quantum Beam Science Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); J-PARC Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); Arima, H. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Yamada, A. [The University of Shiga Prefecture, Shiga 522-8533 (Japan); Tabata, S.; Kondo, M.; Nakamura, A. [Sumitomo Heavy Industries Co., Ltd., Ehime 792-0001 (Japan); Kagi, H.; Yagi, T. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan)

2014-11-15

We developed a six-axis multi-anvil press, ATSUHIME, for high-pressure and high-temperature in situ time-of-flight neutron powder diffraction experiments. The press has six orthogonally oriented hydraulic rams that operate individually to compress a cubic sample assembly. Experiments indicate that the press can generate pressures up to 9.3 GPa and temperatures up to 2000 K using a 6-6-type cell assembly, with available sample volume of about 50 mm{sup 3}. Using a 6-8-type cell assembly, the available conditions expand to 16 GPa and 1273 K. Because the six-axis press has no guide blocks, there is sufficient space around the sample to use the aperture for diffraction and place an incident slit, radial collimators, and a neutron imaging camera close to the sample. Combination of the six-axis press and the collimation devices realized high-quality diffraction pattern with no contamination from the heater or the sample container surrounding the sample. This press constitutes a new tool for using neutron diffraction to study the structures of crystals and liquids under high pressures and temperatures.

Flux pinning in hot isostatically pressed Bi2Sr2CaCu2Ox

International Nuclear Information System (INIS)

Miller, D.J.; Sengupta, S.; Hettinger, J.D.; Shi, D.; Gray, K.E.; Nash, A.S.; Goretta, K.C.

1992-01-01

Magnetic hysteresis data were taken from 4.2 to 35 K on Bi 2 Sr 2 CaCu 2 O x samples that were hot isostatically pressed at 105 MPa in an inert atmosphere at 825 degree C. One set of samples was pressed for only 15 min while the other was pressed for 120 min. The samples pressed for 15 min contained a high density of dislocations and planar faults, while the samples pressed for 120 min contained fewer dislocations and faults, with most dislocations present within subgrain boundaries. The samples with the complex dislocation/planar fault structures exhibited substantially larger hysteresis loops, suggesting enhanced flux pinning

The influence of pressing conditions on SrFe12O19 nano-particles

DEFF Research Database (Denmark)

Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

2015-01-01

work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle size. The powder was pressed using Spark Plasma Syntering system at different conditions in order to investigate how the pressing conditions influence the magnetic...... properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature. Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using...

Spontaneous pneumomediastinum after bench press training.

Science.gov (United States)

Nishino, Tomoya

2017-04-01

Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

Energy Technology Data Exchange (ETDEWEB)

Sujit Banerjee

2005-10-31

Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

Comparison of two polymer-based immunohistochemical detection systems: ENVISION+ and ImmPRESS.

Science.gov (United States)

Ramos-Vara, José A; Miller, Margaret A

2006-11-01

The non-specific background reaction produced in avidin-biotin-based immunohistochemistry, particularly after harsh antigen retrieval procedures, has promoted the use of non-avidin-biotin systems, yet there are few reports comparing the performance of non-avidin-biotin, polymer-based methods. In this study we compare two of these methods, ENVISION+trade mark and ImmPRESS, in animal tissues. We examined the immunoreactivity of 18 antigens in formalin-fixed, paraffin-embedded tissues. Antigens were located in the cytoplasmic membrane (CD11d, CD18 and CD79a), cytoplasm (calretinin, COX-1, COX-2, Glut-1, HepPar 1, KIT, Melan A, tryptase and uroplakin III) or nucleus (MUM-1, PGP 9.5 and thyroid transcription factor 1). We also evaluated three infectious agents (Aspergillus, calicivirus and West Nile virus). The staining with ENVISION+ or ImmPRESS was performed simultaneously for each antigen. The intensity of the reaction and background staining were scored. ImmPRESS yielded similar or higher reaction intensity than ENVISION+trade mark in 16/18 antigens. ImmPRESS produced abundant background with the other two antigens (calretinin and COX-2), which hindered interpretation of the specific reaction. The cost of ImmPRESS was 25% lower than for ENVISION+trade mark. Based on these results, ImmPRESS is a good polymer-based detection system for routine immunohistochemistry.

Natural cold pressed oils as cosmetic products

Directory of Open Access Journals (Sweden)

Małgorzata Ligęza

2016-12-01

Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.

Back-pressure Forging Using a Servo Press

OpenAIRE

河本, 基一郎; Kawamoto, Kiichiro

2015-01-01

博士論文要旨Abstract　以下に掲載：International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者：Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

Trial access to Cambridge University Press ebooks

CERN Multimedia

CERN Library

2011-01-01

From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.

An Update of Freedom of the Press and Information in Latin America and the Caribbean.

Science.gov (United States)

Garrison, Bruce; Munoz, Julio E.

This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

Press Conference: LHC Restart, Season 2

CERN Multimedia

CERN. Geneva

2015-01-01

PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where :   http://cern.ch/directions   at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...

Constructing Childhood: Discourses about School Violence in the Greek Daily Press

Science.gov (United States)

Avgitidou, Sofia; Stamou, Anastasia G.

2013-01-01

This study explores the construction of discourses about childhood in the Greek daily press. It employs the theoretical frameworks of the new sociology of childhood and critical discourse analysis to question which discourses of childhood are constructed in the daily press presenting cases where children were the victimisers in school violent…

A method to press powder at 6000 ton using small amount of explosive

Science.gov (United States)

Hilmi, Ahmad Humaizi; Azmi, Nor Azmaliana; Ismail, Ariffin

2017-12-01

Large die hydraulic press forces are one of the key instruments in making jumbo planes. The machine can produce aircraft components such as wing spars, landing gear supports and armor plates. Superpower nations such as USA, Russia, Germany, Japan, Korea and China have large die hydraulic press which can press 50,000 tons. In Malaysia, heavy-duty press is available from companies such as Proton that builds chassis for cars. However, that heavy-duty press is not able to produce better bulkhead for engines, fuselage, and wings of an aircraft. This paper presents the design of an apparatus that uses 50 grams of commercial grade explosives to produce 6000 tons of compaction. This is a first step towards producing larger scale apparatus that can produce 50,000-ton press. The design was done using AUTODYN blast simulation software. According to the results, the maximum load the apparatus can withstand was 6000 tons which was contributed by 50 grams of commercial explosive(Emulex). Explosive size larger than 50 grams will lead to catastrophic failure. Fabrication of the apparatus was completed. However, testing of the apparatus is not presented in this article.

PRESS: A Novel Framework of Trajectory Compression in Road Networks

OpenAIRE

Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu

2014-01-01

Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...

ÜBERBLICK AUF DIE SCHRIFTLICHE UND ELEKTRONISCHE PRESSE IN DER TURKEI

Directory of Open Access Journals (Sweden)

Güven BÜYÜKBAYKAL

2013-01-01

Full Text Available Das Thema dieser Arbeit ist die Entwicklungen der schriftlichen Presse und der elektronischen Presse in der Türkei. Auberdem wurden die Veranderungen, die die Technologie gebracht hat, zu den Wirkungen in der schriftlichen und elektronischen Presse berührt. Der Import von teurer und verschwenderischer Technologie, die Tatsache, dass die Erhöhung der Eingabepreise den Vertriebspreisen von Zeitungen nicht entgegenkommen konnte, und der sich mit den 80'igern beschleunigende Werbe-Promotionswettbewerb erhöhten die Gestehungskosten im Pressesektor und brachten das Monopol mit sich. Die Neigung zum Monopol wirkte negativ auf die Nachrichtenproduktion, -Verteilung und die Gedankenfreiheit; die Arbeitsbedingungen und die Beschaffenheitsrechte der Pressearbeiter wurden eingeschrankt. Werbungen und unser Magazintage sind der Schwerpunkt der türkischen Presse. Exklusive - reiche Massen, Prominente, die man als 'Gesellschaftssahne' bezeichnet, Sanger und Sangerinnen die in Fernsehprogrammen berühmt wurden, und das private Leben von Entertainern haben einen groBen Platz in der Presse. Nachrichten, die die Gesellschaft oder die Zukunft des Landes interessieren, können bewusst auBer Acht gelassen werden und die Tagung besteht meistens aus Gerüchten mit vielen Bildern und groBen Buchstaben, die überhaupt keinen Nachrichtenwert haben. Letztendlich sollte man Zeitungen zum lesen und nicht zum anschauen drucken. Eine Zeitung sollte nicht mit dem Fernsehen oder dem Internet konkurrieren sondern in ihrer eigenen Rennstrecke bleiben.

Factors influencing the creep strength of hot pressed beryllium

International Nuclear Information System (INIS)

Webster, D.; Crooks, D.D.

1975-01-01

The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

International Commercial Contracts, by Giuditta Cordero Moss. (Cambridge: Cambridge University Press, 2014)

DEFF Research Database (Denmark)

Lando, Ole

2015-01-01

Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713......Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713...

Ospreys Use Bald Eagle Nests in Chesapeake Bay Area

OpenAIRE

Therres, Glenn D.; Chandler, Sheri K.

1993-01-01

Ospreys (Pandion haliaetus) and Bald Eagles (Haliaeetus leucocephalus) share similar breeding habitat in the Chesapeake Bay area and elsewhere. The nests of these species are similar in size and appearance. Ospreys typically build large stick nests in dead trees or on man-made structures (C.J. Henny et al. 1974, Chesapeake Sci. 15:125-133; A.F. Poole 1989, Ospreys: a natural and unnatural history, Cambridge Univ. Press, NY), while Bald Eagles usually build larger nests in live trees (P.B. Woo...

Free Press in a Constitutional Democracy

Science.gov (United States)

Lucianek, Christine

2014-01-01

This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Tokarský, Jonáš, E-mail: jonas.tokarsky@vsb.cz [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); IT4Innovations Centre of Excellence, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Kulhánková, Lenka [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Neuwirthová, Lucie; Mamulová Kutláková, Kateřina [Nanotechnology centre, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Vallová, Silvie [Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Stýskala, Vítězslav [Faculty of Electrical Engineering and Computer Science, VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33 Ostrava—Poruba (Czech Republic); Čapková, Pavla [Faculty of Science, University of J.E. Purkyně, České mládeže 8, 400 96 Ústí nad Labem (Czech Republic)

2016-03-15

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

International Nuclear Information System (INIS)

Tokarský, Jonáš; Kulhánková, Lenka; Neuwirthová, Lucie; Mamulová Kutláková, Kateřina; Vallová, Silvie; Stýskala, Vítězslav; Čapková, Pavla

2016-01-01

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

Start up study of UASB reactor treating press mud for biohydrogen production

International Nuclear Information System (INIS)

Radjaram, B.; Saravanane, R.

2011-01-01

Anaerobic digestion of press mud mixed with water for biohydrogen production was performed in continuous fed UASB bioreactor for 120 days. Experiment was conducted by maintaining constant HRT of 30 h and the volume of biohydrogen evolved daily was monitored. Various parameters like COD, VFA, Alkalinity, EC, Volatile solids, pH with respect to biohydrogen production were monitored at regular interval of time. SBPR was 10.98 ml g -1 COD reduced d -1 and 12.77 ml g -1 VS reduced d -1 on peak yield of biohydrogen. COD reduction was above 70 ± 7%. Maximum gas yield was on the 78th day to 2240 ml d -1 . The aim of the experiment is to study the startup process of UASB reactor for biohydrogen production by anaerobic fermentation of press mud. The inoculum for the process is cow dung and water digested in anaerobic condition for 30 days with municipal sewage sludge. The study explores the viability of biohydrogen production from press mud which is a renewable form of energy to supplement the global energy crisis. -- Highlights: → Feasibility of biohydrogen production from press mud was explored in this study. The gas yield was maximum on the 78th day to 2240 ml d -1 with H 2 % of 52-59%. Biohydrogen yield was about 890 ml kg -1 press mud added d -1 . Press mud is identified as an excellent potential waste to tap energy.

Influence of pressing on the nanostructure and electrical properties of semiconducting polymer nanolayers

International Nuclear Information System (INIS)

Park, Jiho; Kim, Hwajeong; Kim, Youngkyoo

2010-01-01

In this work we attempted to change the nanostructure and electrical properties of semiconducting polymer nanolayers by employing a nano-pressing technique. The semiconducting polymer nanolayers, which consist of poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C 61 (PCBM), were spin-coated on to a conducting polymer buffer layer coated on a transparent conducting oxide substrate. The coated P3HT:PCBM samples were precisely pressed using a nanopress system at 70 .deg. C. The nanostructures of the unpressed and the pressed P3HT:PCBM layers were investigated using a grazing incident angle X-ray diffraction (GIXD) system empowered by a synchrotron radiation source while the electrical properties of those samples were examined using a diode-type device. Results showed that the P3HT chain alignment was improved by pressing, accordingly, the device with the pressed layer exhibited enhanced charge transport characteristics.

Low-load bench press and push-up induce similar muscle hypertrophy and strength gain.

Science.gov (United States)

Kikuchi, Naoki; Nakazato, Koichi

2017-06-01

To investigate the effect of push-up training with a similar load of to 40% of 1- repetition maximumal (1RM) bench press on muscle hypertrophy and strength gain in men. Eighteen male participants (age, 20.2 ± 0.73 years, range: 19-22 years, height: 169.8 ± 4.4 cm, weight: 64.5 ± 4.7 kg) were randomly assigned to one of two experimental groups: bench press at 40%1RM (bench-press group, n = 9) or push-ups with position adjusted (e.g. kneeling) to the same load of bench-press 40%1RM (push-up group, n = 9), performed twice per week for 8 weeks. Muscle thickness at three sites (biceps, triceps, and pectoralis major), bench-press 1RM, maximum repetition at 40%1RM, and power output (medicine ball throw) were measured before and after the training period. Significant increases in 1RM and muscle thickness (triceps and pectoralis major) were observed in bench-press group (1RM, from 60.0 ± 12.1 kg to 65.0 ± 12.1 kg, p bench-press group (28.4 ± 3.3 mm to 31.5 ± 3.7 mm, p bench press is comparably effective for muscle hypertrophy and strength gain over an 8-week training period.

A Comparison of Coverage of Speech and Press Verdicts of Supreme Court.

Science.gov (United States)

Hale, F. Dennis

1979-01-01

An analysis of the coverage by ten newspapers of 20 United States Supreme Court decisions concerning freedom of the press and 20 decisions concerning freedom of speech revealed that the newspapers gave significantly greater coverage to the press decisions. (GT)

[A man with a painful upper arm after bench press exercise].

Science.gov (United States)

Sijtsma, Ben C T; van der Veen, Hugo C; van Raay, Jos J A M

2015-01-01

A 22-year-old male bodybuilder presented with pain and a haematoma of his right upper arm after bench press exercises. Suspicion of a pectoralis muscle tear was confirmed by MRI and surgical repair was performed. Ruptures of the pectoralis major muscle are rare, but may occur in young male bodybuilders, typically after bench press exercises.

Progress in hot pressing

International Nuclear Information System (INIS)

Brodhag, C.; Thevenot, F.

1988-01-01

An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC

Press kit kicks off new branding.

Science.gov (United States)

Rees, Tom

2004-01-01

A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

Citizen Journalism in Cyber Media: Protection and Legal Responsibility Under Indonesian Press Law

OpenAIRE

Prahassacitta, Vidya

2017-01-01

Phenomena of citizen journalism had accepted and become part of cyber media. Cyber media owned and managed by press companies had featured citizen journalists’ information, critics, opinions, and news. Citizen journalism was part of freedom of expression. However, in Indonesia’s press law concept, it was not part of the national press. This created legal issues regarding protection and legal responsibility aspects for both parties. A qualitative research was conducting to solving these issues...

IMMERSE: Interactive Mentoring for Multimodal Experiences in Realistic Social Encounters

Science.gov (United States)

2015-08-28

ride to the airport, asking someone to watch your kids for an hour or pet for a few days; 1000 is characteristic of a large imposition—borrowing a...Influences of Sex and Status in Group Interactions. Journal of Nonverbal Behavior, Vol.(34), pp. 137-153. 44 Dovidio, J. F., Ellyson, S. L., Keating, C...Studies 1, pp. 328–333. 65 de Waal, F. (1982). Chimpanzee politics: Sex and power among apes. Baltimore: Johns Hopkins University Press. 67

A Journalist's Guide to the Free Press.

Science.gov (United States)

Ingelhart, Louis

1996-01-01

Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

A comparison of muscle activity in concentric and counter movement maximum bench press.

Science.gov (United States)

van den Tillaar, Roland; Ettema, Gertjan

2013-01-01

The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.

Citizen Journalism in Cyber Media: Protection and Legal Responsibility Under Indonesian Press Law

Directory of Open Access Journals (Sweden)

Vidya Prahassacitta

2017-01-01

Full Text Available Phenomena of citizen journalism had accepted and become part of cyber media. Cyber media owned and managed by press companies had featured citizen journalists’ information, critics, opinions, and news. Citizen journalism was part of freedom of expression. However, in Indonesia’s press law concept, it was not part of the national press. This created legal issues regarding protection and legal responsibility aspects for both parties. A qualitative research was conducting to solving these issues. Using secondary data from literature study and observation on several cyber media websites, this discovers two conclusions. First, the citizen journalist is part of freedom of the press; it means that a citizen journalist’s creation has protected form censor and bans. However, a citizen journalist still has a limitation which shall be complied videlicet Civil Code and Law No. 11 The year 2008 concerning Information and Electronic Transaction. Violation of both regulations means that a citizen journalist shall be legally responsible. Second, protection and responsibility border between a citizen journalist and press company are based on an agreement. Approval of term and condition of general user content in a website from a citizen journalist means that both parties have agreed to enter into an agreement. A press company might be freed of its legal responsibility as long as conducted its obligation to control and manage contents that have been uploaded and published by a citizen journalist. If the company does not take proportional action against citizen journalist’ contents that violating the law, the press company shall be requested its civil or criminal legal responsibility.

Influence of medical journal press releases on the quality of associated newspaper coverage: retrospective cohort study.

Science.gov (United States)

Schwartz, Lisa M; Woloshin, Steven; Andrews, Alice; Stukel, Therese A

2012-01-27

To determine whether the quality of press releases issued by medical journals can influence the quality of associated newspaper stories. Retrospective cohort study of medical journal press releases and associated news stories. We reviewed consecutive issues (going backwards from January 2009) of five major medical journals (Annals of Internal Medicine, BMJ, Journal of the National Cancer Institute, JAMA, and New England Journal of Medicine) to identify the first 100 original research articles with quantifiable outcomes and that had generated any newspaper coverage (unique stories ≥100 words long). We identified 759 associated newspaper stories using Lexis Nexis and Factiva searches, and 68 journal press releases using Eurekalert and journal website searches. Two independent research assistants assessed the quality of journal articles, press releases, and a stratified random sample of associated newspaper stories (n=343) by using a structured coding scheme for the presence of specific quality measures: basic study facts, quantification of the main result, harms, and limitations. Proportion of newspaper stories with specific quality measures (adjusted for whether the quality measure was present in the journal article's abstract or editor note). We recorded a median of three newspaper stories per journal article (range 1-72). Of 343 stories analysed, 71% reported on articles for which medical journals had issued press releases. 9% of stories quantified the main result with absolute risks when this information was not in the press release, 53% did so when it was in the press release (relative risk 6.0, 95% confidence interval 2.3 to 15.4), and 20% when no press release was issued (2.2, 0.83 to 6.1). 133 (39%) stories reported on research describing beneficial interventions. 24% mentioned harms (or specifically declared no harms) when harms were not mentioned in the press release, 68% when mentioned in the press release (2.8, 1.1 to 7.4), and 36% when no press release

Reducing VOC Press Emission from OSB Manufacturing; FINAL

International Nuclear Information System (INIS)

Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker

2001-01-01

Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board

PREFACE Preface

Science.gov (United States)

Takahashi, Migaku; Saito, Hitoshi; Yoshimura, Satoru; Takanashi, Koki; Sahashi, Masashi; Tsunoda, Masakiyo

2011-01-01

23 countries, with about 40 percent of participants attending from overseas (see figure). The program involved 4 plenary talks (45 minutes each), 37 invited talks (30 minutes), 85 contributed talks (15 minutes), and 352 posters. Pie chart Organizing Committee of ISAMMA 2010 M TakahashiTohoku Univ., Japan, Chairman K TakanashiTohoku Univ., Japan, Chair of the Program Committee H SaitoAkita Univ., Japan, Chair of the Publication Committee M SahashiTohoku Univ., Japan, Chair of the Treasury Committee M TsunodaTohoku Univ., Japan, General Secretary H AkinagaAIST, Japan H FukunagaNagasaki Univ., Japan K HonoNIMS, Japan S IshioAkita Univ., Japan S IwataNagoya Univ., Japan K NakagawaNihon Univ., Japan S NakagawaTokyo Inst. of Tech., Japan T OnoKyoto Univ., Japan Y SuzukiOsaka Univ., Japan M TanakaEhime Univ., Japan T Tanaka Univ. of Tokyo, Japan Program Committee of ISAMMA 2010 K TakanashiTohoku Univ., Japan, ChairS MizukamiTohoku Univ., Japan M MizuguchiTohoku Univ., Japan, Vice-chairH NaganumaTohoku Univ., Japan M DoiTohoku Univ., JapanS NakagawaTokyo Inst. of Tech., Japan A FujitaTohoku Univ., JapanK NakamuraTohoku Univ., Japan K IshiyamaTohoku Univ., JapanK OnoKEK, Japan T KatoNagoya Univ., JapanT OnoKyoto Univ., Japan T KawagoeOsaka Pref. Univ.of Edu., JapanF SatoTohoku Univ., Japan O KitakamiTohoku Univ., JapanM ShiraiTohoku Univ., Japan Y KitamotoTokyo Inst. of Tech., JapanS SugimotoTohoku Univ., Japan F MatsukuraTohoku Univ., JapanM YamaguchiTohoku Univ., Japan C MitsumataHitachi Metals, Japan Publication Committee of ISAMMA 2010 H SaitoAkita Univ., Japan, ChairS MitaniNIMS, Japan S YoshimuraAkita Univ., Japan, Vice-chairH MuraokaTohoku, Japan Y AndoTohoku Univ., JapanM NakanoNagasaki Univ., Japan J AriakeAIT, JapanR NakataniOsaka Univ., Japan H AsanoNagoya Univ., JapanK O'GradyUniv. of York, UK M FutamotoChuo Univ., JapanA SakumaTohoku Univ., Japan J HayakawaHitachi, ARL, JapanT SatoKeio Univ., Japan T HondaKyushu Inst. of Tech., JapanT SatoShinshu Univ., Japan M

Reflexo dos barorreceptores e homeostase da pressão arterial

Directory of Open Access Journals (Sweden)

Anderson Martelli

2013-12-01

Full Text Available A hipertensão arterial é considerada um dos principais fatores de risco para a morbidade e mortalidade cardiovascular. Os reflexos originados nos barorreceptores arteriais e nos receptores de estiramento da região cardiopulmonar são os principais mecanismos de controle efetivo da pressão arterial a curto prazo. O reflexo dos barorreceptores é considerado um sistema de controle de alto ganho, que mantém a pressão arterial dentro de limites normais em períodos de segundos a minutos. Dessa forma, esta revisão busca abordar os mecanismos desenvolvidos pelos barorreceptores na homeostase da pressão arterial. No presente artigo foram relatadas as alterações dos reflexos cardiovasculares na hipertensão arterial, focando a distribuição dos barorreceptores e seu funcionamento no restabelecimento da pressão arterial. Para realização desta pesquisa foi realizada uma revisão de artigos científicos utilizando as bases de dados Medline, Scielo e Lilacs. Adicionalmente foram consultados livros de fisiologia humana para complementação das informações sobre a fisiologia do barorreflexo na homeostase da pressão arterial. Estudos clínicos têm mostrado que uma reduzida sensibilidade do barorreflexo está associada com a morte súbita que se segue ao infarto agudo do miocárdio. O entendimento dos reflexos dos barorreceptores e a manutenção da hipertensão arterial em curto prazo são de grande importância para o entendimento da fisiopatogenia envolvidas no desenvolvimento e/ou evolução de determinadas alterações patológicas.

Press touch code: A finger press based screen size independent authentication scheme for smart devices.

Science.gov (United States)

Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z

2017-01-01

Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

Press touch code: A finger press based screen size independent authentication scheme for smart devices

Science.gov (United States)

Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.

2017-01-01

Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262

Densification of boron carbide at relatively low temperatures by hot pressing and hot isostatic pressing

International Nuclear Information System (INIS)

Telle, R.

1988-01-01

The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs

Press touch code: A finger press based screen size independent authentication scheme for smart devices.

Directory of Open Access Journals (Sweden)

M S A Noman Ranak

Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

Hydrogen Decrepitation Press-Less Process Recycling of NdFeB sintered magnets

DEFF Research Database (Denmark)

Xia, Manlong; Abrahamsen, Asger Bech; Bahl, Christian

2017-01-01

A Hydrogen Decrepitation Press-Less Process (HD-PLP) recycling method for recycling of anisotropic NdFeB magnets is demonstrated. The method combines hydrogen decrepitation (HD) disintegration of the initial magnet, powder sieving and the Press-Less Process (PLP), where hydride powder is sintered...

Guardians of the public sphere? Political scandal and the press, 1979-97.

Science.gov (United States)

See, Helena

2013-01-01

The political scandals that beset the Conservative Party during the 1980s and 1990s constitute a valuable lens for examining two interrelated areas of study: the changing power relationship between government and press, and the changing interface between public and private in contemporary discourse. Close discursive analysis of the press coverage of these scandals--and of the libel actions that resulted from them--highlights the extent to which the Thatcher administration and the tabloid press propagated a shared moral discourse, founded on the repudiation of 'permissiveness', and a return to the ideal of the patriarchal nuclear family. This alliance transformed the way in which the Conservative message was communicated, disseminated, and indeed constituted, yet ultimately proved to be a double-edged sword. By catalysing the disintegration of the boundary between public and private in political life, and investing the press with the power to mould and configure public expectations of sexual morality, Thatcher laid the groundwork for the eventual fall of the Major administration, in the wake of a long series of financial and sexual scandals. As such, this article offers insights into a hitherto unexamined aspect of Thatcher's legacy, and the unprecedented influence of the press in late twentieth-century politics.

FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

Directory of Open Access Journals (Sweden)

Clara Staples

2016-06-01

Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.

Association Between Maximal Bench Press Strength and Isometric Handgrip Strength Among Breast Cancer Survivors.

Science.gov (United States)

Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H

2017-02-01

To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Speech freedom and press freedom in human security in Rwanda

OpenAIRE

Niyonzima, Oswald

2014-01-01

Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...

FRAMEWORKING THE PRESS FREEDOM, AT THE BORDER BETWEEN LEGAL AND SELF-REGULATION

Directory of Open Access Journals (Sweden)

Cristina Anca PĂIUȘESCU

2014-05-01

Full Text Available Freedom of the press is essential to democracy and to a pluralistic culture. Most journalists are against any form of legal regulation considering the creation of a press law as an interference with freedom of the press, while state authorities considered necessary minimum set of rules to sanction those who exceed the "normality" of free speech. If in the audiovisual field the legislation tends toward European standards, for print media all draft laws proposed so far by different political parties or the government have failed. Representatives of the major newspapers saw each time in these legislative proposals an attempt to "choke" the freedom of the press. In this context, self-regulation is seen as a way in which journalists can establish their own rules in order to protect themselves from the state attempt to regulate this area, a method of protecting against political manipulation and preventing the erosion of public trust, and it is also seen as a method of education within the profession.

Strength, body composition, and functional outcomes in the squat versus leg press exercises.

Science.gov (United States)

Rossi, Fabrício E; Schoenfeld, Brad J; Ocetnik, Skyler; Young, Jonathan; Vigotsky, Andrew; Contreras, Bret; Krieger, James W; Miller, Michael G; Cholewa, Jason

2018-03-01

The purpose of this study was to compare strength, body composition, and functional outcome measures following performance of the back squat, leg press, or a combination of the two exercises. Subjects were pair-matched based on initial strength levels and then randomly assigned to 1 of 3 groups: a squat-only group (SQ) that solely performed squats for the lower body; a leg press-only group (LP) that solely performed leg presses for the lower body, or a combined squat and leg press group (SQ-LP) that performed both squats and leg presses for the lower body. All other RT variables were held constant. The study period lasted 10 weeks with subjects performing 2 lower body workouts per week comprising 6 sets per session at loads corresponding to 8-12 RM with 90- to 120-second rest intervals. Results showed that SQ had greater transfer to maximal squat strength compared to the leg press. Effect sizes favored SQ and SQ-LP versus LP with respect to countermovement jump while greater effect sizes for dynamic balance were noted for SQ-LP and LP compared to SQ, although no statistical differences were noted between conditions. These findings suggest that both free weights and machines can improve functional outcomes, and that the extent of transfer may be specific to the given task.

Effect of Fatigue Upon Performance and Electromyographic Activity in 6-RM Bench Press.

Science.gov (United States)

van den Tillaar, Roland; Saeterbakken, Atle

2014-03-27

The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench press. Total lifting time increased and the velocity in the ascending movement decreased (p≤0.001). However, the kinematics in the descending phase deferred: the time decreased and velocity increased during the 6-RM (p≤0.001). Generally, muscles increased their EMG amplitude during the six repetitions in the ascending movement, while only three of the seven measured muscles showed an increase over the six repetitions in the descending part in 6-RM bench pressing. It was concluded that the bench pressing performance decreased (lower barbell velocities and longer lifting times) with increasing fatigue in the 6-RM execution. Furthermore EMG increased in the prime movers and the trunk stabilizers (abdominal and spine), while the antagonist muscle (biceps) activity was not affected by fatigue during the lifting phase in a single set of 6-RM bench pressing.

Natural Hazards and the press in the western Mediterranean region

Directory of Open Access Journals (Sweden)

M. Llasat-Botija

2007-07-01

Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

Advertising presence on the visual configuration of the digital press

Directory of Open Access Journals (Sweden)

Belinda de Frutos Torres

2016-07-01

Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.

Film Advertising in the Albanian Press before World War II

Directory of Open Access Journals (Sweden)

Vjollca Hysi Panajoti

2015-05-01

Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

"...Establish the Student Press--And Stifle It!"

Science.gov (United States)

McCallie, Franklin

1990-01-01

Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

The Moral Universes of Libertarian Press Theory.

Science.gov (United States)

Wuliger, Gregory T.

1991-01-01

Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…

[Report from the Student Press Law Center.

Science.gov (United States)

Student Press Law Center, Washington, DC.

The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…

Effect of hot isostatic pressing on the properties of sintered alpha silicon carbide

Science.gov (United States)

Watson, G. K.; Moore, T. J.; Millard, M. L.

1985-01-01

Two lots of alpha silicon carbide were isostatically hot-pressed under 138 MPa for 2 h in Ar at temperatures up to 2200 C. Nearly theoretically dense specimens resulted. Hot isostatic pressing increased both room-temperature strength and 1200 C strength, and resulted in improved reliability. One lot of material which was pressed at 2200 C showed increases of about 20 percent in room-temperature strength and about 50 percent in 1200 C flexural strength; the Weibull modulus improved about 100 percent.

The Social Theories of the press: journalism and society

Directory of Open Access Journals (Sweden)

Beatriz Marocco

2005-06-01

Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

Graphite and boron carbide composites made by hot-pressing

International Nuclear Information System (INIS)

Miyazaki, K.; Hagio, T.; Kobayashi, K.

1981-01-01

Composites consisting of graphite and boron carbide were made by hot-pressing mixed powders of coke carbon and boron carbide. The change of relative density, mechanical strength and electrical resistivity of the composites and the X-ray parameters of coke carbon were investigated with increase of boron carbide content and hot-pressing temperature. From these experiments, it was found that boron carbide powder has a remarkable effect on sintering and graphitization of coke carbon powder above the hot-pressing temperature of 2000 0 C. At 2200 0 C, electrical resistivity of the composite and d(002) spacing of coke carbon once showed minimum values at about 5 to 10 wt% boron carbide and then increased. The strength of the composite increased with increase of boron carbide content. It was considered that some boron from boron carbide began to diffuse substitutionally into the graphite structure above 2000 0 C and densification and graphitization were promoted with the diffusion of boron. Improvements could be made to the mechanical strength, density, oxidation resistance and manufacturing methods by comparing with the properties and processes of conventional graphites. (author)

The Social Theories of the press: journalism and society

Directory of Open Access Journals (Sweden)

Beatriz Marocco

2011-02-01

Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

Investigation of Comparative Mosquito Breeding in Dredged Material Disposal Sites Used in the Maintenance Dredging of the Atlantic Intra-Coastal Waterway in South Carolina.

Science.gov (United States)

1978-01-01

rctary ditching equipment falls inton thc latter category. Equipment of this type cuts a ditch with a Srt-ating cutting head . As the marsh sod is removed...several years if the site is not further altered by dredging. * 89 W W W V W W W W W W W SITE DESIGNATION: WACCAMAW NECK (G-1O) Summary 151. This...Bionomics and embryology of the inland floodwater mosquito . .. .’. Univ. of Illinois Press. 2 11pp. S Jeane, G. S., II, and R. E. Pine. 1975

Proceedings of the Molecular Electronic Devices Workshop Held at Washington, DC on 23-24 March 1981.

Science.gov (United States)

1981-10-22

state in the gas phase. Deuteron quadrupole coupling constant (DQCC) studies by Jackman (4) gave the same result for the solution state of the molecule...3157 (1979). 4. L.M. Jackman , J.C. Trewella and R.C. Haddon, J. Am. Chem. Soc. 102, 2519 (1980). 5. C. Svensson, S.C. Abrahams, J.L. Bernstein and...Science, 175, 991-993 (1972). 7. L. Pauling, "The Nature of the Chemical Bond," Cornell Univ. Press, Ithaca, N. Y., 3rd Ed., 1960. 8. M. N. Hughes , "The

Boa constrictor (Boa constrictor): foraging behavior

Science.gov (United States)

Sorrell, G.G.; Boback, M.S.; Reed, R.N.; Green, S.; Montgomery, Chad E.; DeSouza, L.S.; Chiaraviglio, M.

2011-01-01

Boa constrictor is often referred to as a sit-and-wait or ambush forager that chooses locations to maximize the likelihood of prey encounters (Greene 1983. In Janzen [ed.], Costa Rica Natural History, pp. 380-382. Univ. Chicago Press, Illinois). However, as more is learned about the natural history of snakes in general, the dichotomy between active versus ambush foraging is becoming blurred. Herein, we describe an instance of diurnal active foraging by a B. constrictor, illustrating that this species exhibits a range of foraging behaviors.

Researching on YH100 Numerical Control Servo Press Hydraulic Control System and Control Algorithm

Directory of Open Access Journals (Sweden)

Kai LI

2014-09-01

Full Text Available In order to study the numerical control (NC servo press hydraulic control system and its control algorithm. The numerical control servo press performance and control principle of hydraulic control system are analyzed. According to the flow equation of the hydraulic control valve, hydraulic cylinder flow continuity equation and the force balance equation of the hydraulic cylinder with load press, the mathematical model of hydraulic control system is established. And the servo press hydraulic system transfer function is deduced. Introducing the suitable immune particle swarm control algorithm for servo press hydraulic system, and the control system block diagram is established. Immune algorithm is used to optimize new control parameters of the system and adopt the new optimization results to optimize the system simulation. The simulation result shows that the hydraulic system’s transition time controlled by the immune particle swarm algorithm is shorter than traditional ones, and the control performance is obviously improved. Finally it can be concluded that immune particle swarm PID control have these characteristics such as quickness, stability and accuracy. Applying this principle into application, the obtained YH100 numerical control servo press hydraulic control system meets the requirement.

The year without pants WordPress.com and the future of work

CERN Document Server

Berkun, Scott

2013-01-01

A behind-the-scenes look at the firm behind WordPress.com and the unique work culture that contributes to its phenomenal success 50 million websites, or twenty percent of the entire web, use WordPress software. The force behind WordPress.com is a convention-defying company called Automattic, Inc., whose 120 employees work from anywhere in the world they wish, barely use email, and launch improvements to their products dozens of times a day. With a fraction of the resources of Google, Amazon, or Facebook, they have a similar impact on the future of the Internet. How is this possible? What's dif

Law of the Student Press. Second Edition.

Science.gov (United States)

Student Press Law Center, Washington, DC.

Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings…

When International Press Rights "Are" the News

Science.gov (United States)

Freedman, Eric

2006-01-01

In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

Implications of the Baltimore Rail Tunnel Fire for Full-Scale Testing of Shipping Casks

International Nuclear Information System (INIS)

Halstead, R. J.; Dilger, F.

2003-01-01

The U.S. Nuclear Regulatory Commission (NRC) does not currently require full-scale physical testing of shipping casks as part of its certification process. Stakeholders have long urged NRC to require full-scale testing as part of certification. NRC is currently preparing a full-scale casktesting proposal as part of the Package Performance Study (PPS) that grew out of the NRC reexamination of the Modal Study. The State of Nevada and Clark County remain committed to the position that demonstration testing would not be an acceptable substitute for a combination of full-scale testing, scale-model tests, and computer simulation of each new cask design prior to certification. Based on previous analyses of cask testing issues, and on preliminary findings regarding the July 2001 Baltimore rail tunnel fire, the authors recommend that NRC prioritize extra-regulatory thermal testing of a large rail cask and the GA-4 truck cask under the PPS. The specific fire conditions and other aspects of the full-scale extra-regulatory tests recommended for the PPS are yet to be determined. NRC, in consultation with stakeholders, must consider past real-world accidents and computer simulations to establish temperature failure thresholds for cask containment and fuel cladding. The cost of extra-regulatory thermal testing is yet to be determined. The minimum cost for regulatory thermal testing of a legal-weight truck cask would likely be $3.3-3.8 million

Proximity to vacant buildings is associated with increased fire risk in Baltimore, Maryland, homes.

Science.gov (United States)

Schachterle, Stephen E; Bishai, David; Shields, Wendy; Stepnitz, Rebecca; Gielen, Andrea C

2012-04-01

Fires and burns are a leading cause of unintentional injury death in the USA. Although it has been anecdotally reported that vacant dwellings are at a higher risk for fire, the association between vacancy and fire risk at the individual household level has not been empirically measured. In this cross-sectional study, geocoded residential vacant properties (VP) and fire events are analysed in Baltimore City at the census tract level and the individual household level. On average, a 10% increase in the proportion of vacancies in a census tract was associated with a 9.9% increase in fires (95% CI: 5% to 15%). Random-effects Poisson models, controlling for housing and neighbourhood conditions, found contagion effects. The risk of fire in an occupied dwelling increased by 8% (95% CI: 1% to 10%) for every vacant structure within 10 m, and the risk of fire decreased by half (95% CI: 45% to 62%) for every km between an occupied dwelling and vacant building. Close proximity to VP was associated with trash fires within dwellings (p=0.039) and structure fires (p=0.012). We believe that this is the first study to demonstrate increased risk posed by nearby VP at the household level, confirming earlier ecological analyses of the role of VP as strong correlates of home fires. Measurement of this risk can motivate property owners, policy makers and insurers to invest in risk reduction measures that include building maintenance and trash removal.

The Association between Maximal Bench Press Strength and Isometric Handgrip Strength among Breast Cancer Survivors

Science.gov (United States)

Rogers, Benjamin H.; Brown, Justin C.; Gater, David R.; Schmitz, Kathryn H.

2016-01-01

Objective One-repetition maximum (1-RM) bench press strength is considered the gold standard to quantify upper-body muscular strength. Isometric handgrip strength is frequently used as a surrogate for 1-RM bench press strength among breast cancer (BrCa) survivors. The relationship between 1-RM bench press strength and isometric handgrip strength, however, has not been characterized among BrCa survivors. Design Cross-sectional study. Setting Laboratory. Participants Community-dwelling BrCa survivors. Interventions Not applicable. Main Outcome Measure 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer with three maximal contractions of left and right hands. All measures were conducted by staff with training in clinical exercise testing. Results Among 295 BrCa survivors, 1-RM bench press strength was 18.2±6.1 kg (range: 2.2-43.0) and isometric handgrip strength was 23.5±5.8 kg (range: 9.0-43.0). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=0.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7 kg (95% limits of agreement: −8.2 to 17.6). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=0.31; Pstrength (R2=0.23). Conclusions Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among BrCa survivors. 1-RM bench press and isometric handgrip strength quantify distinct components of muscular strength. PMID:27543047

Inductive ingot heating for extrusion press applications; Induktive Bolzenerwaermung fuer Strangpressanwendungen

Energy Technology Data Exchange (ETDEWEB)

Beer, Stefan [I.A.S. Induktions-Anlagen + Service GmbH und Co. KG, Iserlohn (Germany)

2013-03-15

Inductive heating of large-format aluminium ingots on modern extrusion press lines generates significant process-engineering benefits. In addition, the proportion of special alloys processed is continuously increasing, accompanied simultaneously by ever smaller production batches, both of which are factors necessitating improvement of and greater flexibility in process-cycle control. This report examines a system concept recently commissioned on one of the world's largest aluminium extrusion presses. (orig.)

Influence of press temperature on the properties of binderless particleboard made from oil palm trunk

International Nuclear Information System (INIS)

Hashim, Rokiah; Said, Norafizah; Lamaming, Junidah; Baskaran, Mohana; Sulaiman, Othman; Sato, Masatoshi; Hiziroglu, Salim; Sugimoto, Tomoko

2011-01-01

Research highlights: → Influence of press temperature on binderless particleboard of oil palm trunk. → Modulus of rupture increased with increasing press temperature. → The internal bond strength of samples meets JIS standard. → Water absorption and thickness swelling improved. → Increasing pressing temperature improve properties of the boards. -- Abstract: The objective of this investigation was to evaluate the properties of binderless particleboard manufactured from oil palm trunk as a function of press temperature. Particleboard samples were manufactured with a target density of 0.80 g/cm 3 using press temperatures of 160 o C, 180 o C and 200 o C. The modulus of rupture, internal bond strength, water absorption and thickness swelling of the boards were determined based on Japanese Industrial Standards (JIS). Thermal gravimetric analysis, Fourier transform infrared spectroscopy and field-emission scanning electron microscopy coupled with energy dispersive X-ray analysis were employed to characterize the properties of the raw materials and the manufactured panels. The moduli of rupture of the samples were observed to increase with increasing press temperature, but they did not meet the standard values. However, the internal bond strength of the samples attained satisfactory values according to the JIS standard for all three temperature levels. Water absorption and thickness swelling of the boards decreased with increasing pressing temperature. Based on the findings in this study, increasing the pressing temperature may be considered a potential way of improving the properties of binderless particleboard.

Poland's Press and Broadcasting Under the Gierek Regime

Science.gov (United States)

Shanor, Donald R.

1974-01-01

Reports that the Polish press and broadcasting have been carrying more news and less propaganda since the 1970 Baltic upheavel and that the Polish media are generally allowed more freedom than media in other Communist nations. (RB)

Bench press training program with attached chains for female volleyball and basketball athletes.

Science.gov (United States)

Burnham, Timothy R; Ruud, Jason D; McGowan, Robert

2010-02-01

Attaching chains to barbells to increase strength and power has become popular for athletes; however, little scientific evidence supports this practice. The present purpose was to compare chain training to traditional training for the bench press. Women collegiate athletes in volleyball and basketball (N = 19) participated in a 16-session bench press program. They were matched into either a Traditional or a Chain training group by 1-repetition maximum (1RM). The Traditional group performed the bench press with conventional equipment, while the Chain group trained with attached chains (5% of weight). Analysis showed a significant increase in 1RM for both groups over 16 sessions, Traditional +11.8% and Chain +17.4%. The difference between the groups was not statistically significant, but suggests the women who trained with attached chains improved their bench press more than the Traditional group.

Renal function and long-term decline in cognitive function: the Baltimore Longitudinal Study of Aging.

Science.gov (United States)

Seliger, Stephen L; Wendell, Carrington R; Waldstein, Shari R; Ferrucci, Luigi; Zonderman, Alan B

2015-01-01

Renal disease has been associated with greater risk of dementia and greater cognitive impairment. However, the relationship of lower renal function with long-term decline in specific domains of cognitive function remains unclear among community-dwelling, non-demented individuals. Stroke- and dementia-free participants (n = 2,116) were enrolled in the Baltimore Longitudinal Study of Aging, a community-based, prospective, longitudinal study. Renal function was estimated by the inverse of serum creatinine adjusted for age, sex and race and (in sensitivity analyses) estimated glomerular filtration rate (eGFR) using the MDRD formula. Outcome measures were changes in scores on 6 cognitive tests encompassing a range of cognitive functions, measured at 2-year intervals. Mixed-effects regression models examined the longitudinal relations of renal function with cognitive functions after adjusting for demographics, comorbidity and other potential confounders. Mean age at initial testing was 53.9 years (SD 17.1), and 94 participants (4.4%) had an eGFR age, longitudinal increases in creatinine concentrations were associated with more rapid decline in performance on several cognitive measures, including the learning slope of the California Verbal Learning Test, a test of verbal learning (p renal function independently associated with greater long-term declines in visual memory and verbal memory and learning. © 2015 National Institutes of Health (NIH). Published by S. Karger AG, Basel.

Strength-toughness relations in sintered and isostatically hot-pressed ZrO2-toughened Al2O3

International Nuclear Information System (INIS)

Hori, S.; Yoshimura, M.; Somiya, S.

1986-01-01

The fracture toughness of fine-grained undoped ZrO 2 -toughened Al 2 O 3 (ZTA) was essentially unchanged by post-sintering hot isostatic pressing and increased monotonically with ZrO 2 additions up to 25 wt%. The strength of ZTA with 5 to 15 wt% tetragonal ZrO 2 , which depended monotonically on the amount of ZrO 2 present before hot isostatic pressing, was increased by pressing but became almost constant between 5 and 15 wt% ZrO 2 addition. The strength appeared to be controlled by pores before pressing and by surface flaws after pressing; the size of flaws after pressing increased with ZrO 2 content. The strength of ZTA containing mostly monoclinic ZrO 2 (20 to 25 wt%) remained almost constant despite the noticeable density increase upon hot isostatic pressing because the strength was controlled by preexisting microcracks whose extent did not change on postsintering pressing. These strength-toughness relations in sintered and isostatically hot-pressed ZTA are explained on the basis of R-curve behavior. The importance of the contribution of microcracks to the toughness of ZTA is emphasized

Normalized knee-extension strength or leg-press power after fast-track total knee arthroplasty

DEFF Research Database (Denmark)

Aalund, Peter K; Larsen, Kristian; Hansen, Torben Bæk

2013-01-01

OBJECTIVE: (s): To investigate which of the two muscle-impairment measures for the operated leg, normalized knee extension strength or leg press power, is more closely associated to performance-based and self-reported measures of function shortly following total knee arthroplasty (TKA). DESIGN...... and dynamic leg presses to determine their body-mass normalized knee extension strength and leg press power, respectively. The 10-m fast speed walking and 30-s chair stand tests were used to determine performance-based function, while the Western Ontario McMaster University Osteoarthritis Index (WOMAC......) and Oxford Knee scores were used to determine self-reported function. RESULTS: Normalized leg press power was more closely associated to both performance-based (r=.82, P...

Effect of Barbell Weight on the Structure of the Flat Bench Press.

Science.gov (United States)

Król, Henryk; Gołaś, Artur

2017-05-01

Król, H and Gołaś, A. Effect of barbell weight on the structure of the flat bench press. J Strength Cond Res 31(5): 1321-1337, 2017-In this study, we have used the multimodular measuring system SMART. The system consisted of 6 infrared cameras and a wireless module to measure muscle bioelectric activity. In addition, the path of the barbell was measured with a special device called the pantograph. Our study concerns the change in the structure of the flat bench press when the weight of the barbell is increased. The research on the bench press technique included both the causes of the motion: the internal structure of the movement and the external kinematic structure showing the effects of the motion, i.e., all the characteristics of the movement. Twenty healthy, male recreational weight trainers with at least 1 year of lifting experience (the mean ± SD = 3.3 ± 1.6 years) were recruited for this study. The subjects had a mean body mass of 80.2 ± 8.6 kg, an average height of 1.77 ± 0.08 m, and their average age was 24.7 ± 0.9 years. In the measuring session, the participants performed consecutive sets of a single repetition of bench pressing with an increasing load (about 70, 80, 90, and 100% of their 1 repetition maximum [1RM]). The results showed a significant change in the phase structure of the bench press, as the barbell weight was increased. While doing the bench press at a 100% 1RM load, the pectoralis major changes from being the prime mover to being the supportive prime mover. At the same time, the role of the prime mover is taken on by the deltoideus anterior. The triceps brachii, in particular, clearly shows a greater involvement.

Pronouncements and Denunciations: An Analysis of State Press Association Ethics Codes from the 1920s.

Science.gov (United States)

Cronin, Mary M.; McPherson, James B.

1995-01-01

Discusses how four situational concerns (the rise of press agents, the fallout from World War I propaganda, sensationalism's resurgence, and editorial independence) contributed to a noticeable decline of the public's trust in the press. Shows how, as a result, 12 state press association ethics codes from the 1920s consistently emphasized the…

Hydrophobic organic contaminants in surficial sediments of Baltimore Harbor: Inventories and sources

International Nuclear Information System (INIS)

Ashley, J.T.F.; Baker, J.E.

1999-01-01

The heavily urbanized and industrialized Baltimore Harbor/Patapsco River/Back River system is one of the most highly contaminated regions of the Chesapeake Bay. In June 1996, surficial sediments were collected at 80 sites throughout the subestuarine system, including historically undersampled creek sand embayments. The samples were analyzed for a suite of hydrophobic organic contaminants (HOCs) consisting of 32 polycyclic aromatic hydrocarbons (PAHs) and 113 polychlorinated biphenyl (PCB) congeners. Total PAH and total PCB concentrations ranged from 90 to 46,200 and 8 to 2,150 ng/g dry weight, respectively. There was enormous spatial variability in the concentrations of HOCs, which was not well correlated to grain size or organic carbon content, suggesting nonequilibrium partitioning and/or proximity to sources as important factors explaining the observed spatial variability. High concentrations of both classes of HOCs were localized around major urban stormwater runoff discharges. Elevated PAH concentrations were also centered around the Sparrow's Point Industrial Complex, most likely a result of the pyrolysis of coal during the production of steel. All but 1 of the 80 sites exceeded the effects range-low (ERL) for total PCBs and, of those sites, 40% exceeded the effects range-medium (ERM), suggesting toxicity to marine benthic organisms would frequently occur. Using principal component analysis, differences in PAH signatures were discerned. Higher molecular weight PAHs were enriched in signatures from sediments close to suspected sources (i.e., urban stormwater runoff and steel production complexes) compared to those patterns observed at sites further from outfalls or runoff. Due to varying solubilities and affinities for organic matter of the individual PAHs, partitioning of the heavier weight PAHs may enrich settling particles with high molecular weight PAHs. Lower molecular weight PAHs, having lower affinity for particles, may travel from the source to a

Associations of salivary cortisol with cognitive function in the Baltimore memory study.

Science.gov (United States)

Lee, Brian K; Glass, Thomas A; McAtee, Matthew J; Wand, Gary S; Bandeen-Roche, Karen; Bolla, Karen I; Schwartz, Brian S

2007-07-01

The stress responses of the hypothalamic-pituitary-adrenal axis can produce adverse effects on the brain. Previous studies have concluded that an elevated level of cortisol is a risk factor for cognitive dysfunction and decline in aging but have been limited by sex exclusion, restricted cognitive batteries, and small sample sizes. To examine associations among salivary cortisol metrics and cognitive domain scores in an urban adult population. A cross-sectional analysis was conducted using data from a longitudinal study involving 1140 Baltimore, Maryland, residents aged 50 to 70 years. Four salivary cortisol samples were obtained from 967 participants across 1 study visit (before, during, and after cognitive testing as well as at the end of the visit) from which 7 cortisol metrics were created. We examined associations of cortisol metrics with cognitive performance using multiple linear regression. Performance on 20 standard cognitive tests was measured and combined to form summary measures in 7 domains (language, processing speed, eye-hand coordination, executive functioning, verbal memory and learning, visual memory, and visuoconstruction). Higher levels of pretest and mean cortisol as well as the area under the curve of cortisol over the study visit were associated with worse performance (P executive functioning, verbal memory and learning, and visual memory). For instance, an interquartile range increase in the area under the curve was equivalent to a decrease in the language score expected from an increase in 5.6 (95% confidence interval, 4.2-7.1) years of age. Elevated cortisol was associated with poorer cognitive function across a range of domains in this large population-based study. We believe the findings are consistent with the hypothesis that hypothalamic-pituitary-adrenal axis dysregulation may be a risk factor for poorer cognitive performance in older persons.

49 CFR 1103.26 - Discussion of pending litigation in the public press.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Discussion of pending litigation in the public... § 1103.26 Discussion of pending litigation in the public press. Attempts to influence the action and... unfair to the Board if the facts of pending litigation are made known to the public through the press in...

Elite Framing of Inequality in the Press: Brazil and Uruguay Compared

Directory of Open Access Journals (Sweden)

Matias López

2016-04-01

Full Text Available Current elite studies argue that inequality produces negative externalities to elites, who may either promote democracy or adopt authoritarian measures in order to shield their interests from the actions of the rebellious poor. This article argues that elite framing of poverty and inequality in the press is a good thermometer of elite public response to such externalities. The press represents a communication tool shared by elites in the state, market, civil society, and, most evidently, the media itself. If inequality threatens elite rule, elites should share their concerns in order to move towards a solution. Since the literature links inequality and elite response, I propose undertaking a comparison of elite public responses to poverty and inequality in two South American cases with opposite records of inequality: Brazil and Uruguay. The article approaches elite framing of poverty and inequality in the press by analyzing opinion pieces and editorials in the main newspapers of both countries. Results invert the expected link between inequality and elite response. Elite framing of inequality in the Brazilian press did not suggest elite concern with externalities, neither an elite turn towards more democracy or authoritarianism. Contrastingly, a few Uruguayan elites did frame the poor as menacing.

A comparison of successful and unsuccessful attempts in maximal bench pressing.

Science.gov (United States)

van den Tillaar, Roland; Ettema, Gertjan

2009-11-01

This study was designed to compare the differences in EMG and kinematics between successful and unsuccessful attempts in bench pressing at one repetition maximum (1RM) in recreational weight-trained subjects. We hypothesized that failure occurs during the sticking period (the period during which there is a temporary reduction in movement velocity). Eleven male subjects (age = 21.9 +/- 1.8 yr, mass = 80.0 +/- 11.2 kg, height = 1.79 +/- 0.08 m) with at least 1 yr of bench press training experience participated in this study. They performed attempts at 1RM and 1RM + 2.5 kg in bench press during which kinematics and muscle activity were recorded. One successful attempt and one unsuccessful attempt were used for further analysis. Both attempts showed the same sticking period, but only half of the failures occurred during that period. The main differences in the kinematics occurred during the sticking period. Muscle activity, in contrast, showed the same pattern in both attempts and only differed during the downward and the start of the upward movement of the lift. The sticking period occurs in both successful and unsuccessful attempts in maximal bench press. However, failure does not always occur during the sticking period.

Simulation of press-forming for automobile part using ultra high tension steel

Directory of Open Access Journals (Sweden)

Tanabe I.

2012-08-01

Full Text Available In recent years, ultra high tension steel has gradually been used in the automobile industry. The development of press-forming technology is now essential by reason of its high productivity and high product quality. In this study, tensile tests were performed with a view to understanding the material properties. Press-forming tests were then carried out with regard to the behaviors of spring back and deep-drawability, and manufacturing a real product. The ultra high tension steel used in the experiments had a thickness of 1 mm and a tensile strength of 1000 MPa. Finally, simulations of spring back, deep-drawability and manufacturing a real product in ultra high tension steel were conducted and evaluated in order to calculate the optimum-press-forming conditions and the optimum shape of the die. FEM with non-linear and dynamic analysis using Euler-Lagrange’s element was used for the simulations. It is concluded from the results that (1 the simulations conformed to the results of the experiments (2 the simulations proved very effective for calculating the optimum press conditions and die shape.

Anthropometry as a predictor of bench press performance done at different loads.

Science.gov (United States)

Caruso, John F; Taylor, Skyler T; Lutz, Brant M; Olson, Nathan M; Mason, Melissa L; Borgsmiller, Jake A; Riner, Rebekah D

2012-09-01

The purpose of our study was to examine the ability of anthropometric variables (body mass, total arm length, biacromial width) to predict bench press performance at both maximal and submaximal loads. Our methods required 36 men to visit our laboratory and submit to anthropometric measurements, followed by lifting as much weight as possible in good form one time (1 repetition maximum, 1RM) in the exercise. They made 3 more visits in which they performed 4 sets of bench presses to volitional failure at 1 of 3 (40, 55, or 75% 1RM) submaximal loads. An accelerometer (Myotest Inc., Royal Oak MI) measured peak force, velocity, and power after each submaximal load set. With stepwise multivariate regression, our 3 anthropometric variables attempted to explain significant amounts of variance for 13 bench press performance indices. For criterion measures that reached significance, separate Pearson product moment correlation coefficients further assessed if the strength of association each anthropometric variable had with the criterion was also significant. Our analyses showed that anthropometry explained significant amounts (p bench press prowess in athletes.

Hot pressing, strength, and fracture of calcium hexaboride

International Nuclear Information System (INIS)

Dutta, S.K.

1975-01-01

Fracture behavior and strength of hot-pressed CaB 6 were studied. The modulus of elasticity determined by attaching strain gages to the tensile surface of the bend bars to measure strain, was 55 +- 3 x 10 6 psi. The results are compared with values for other low density ceramic materials (B 4 C, SiB 6 , Be 4 B, AlB 12 ) in a table. The fracture mode was observed for both modulus of rupture and impact test specimens. Predominantly transgranular fracture, associated with distinct step cleavages is evident. Fracture origins were examined in an effort to understand the strength limiting features in hot-pressed CaB 6 specimens. Surface defects, large grain agglomerations, and isolated pore pockets were observed and varied from bar to bar; these were similar to those found in B 4 C. (U.S.)

Autoshaping and automaintenance of a key-press response in squirrel monkeys.

Science.gov (United States)

Gamzu, E; Schwam, E

1974-03-01

Following exposure for a minimum of 500 to 600 trials, three of four naive squirrel monkeys eventually pressed a response key, illumination of which always preceded delivery of a food pellet. Three other naive monkeys did not press the key when the pellets were delivered randomly with respect to key illumination. Despite some similarities to autoshaping using pigeons, the data indicate many points of difference when squirrel monkeys are used as subjects. Although key-food pairings were shown to be important in the acquisition of the key-press response, they were ineffective in maintaining the response when either a negative response-reinforcer dependency was introduced, or when there was no scheduled response-reinforcer dependency (fixed trial). Not all demonstrations of autoshaping can be considered to be under the control of those processes that are primarily responsible for the phenomena obtained in pigeons.

High Performance Transfer Press for Precision Manufacturing of Micro Metal Parts

DEFF Research Database (Denmark)

Mahshid, Rasoul

for this technology and are available already in the market. Similar to conventional forming processes, the presence of a handling system can significantly improve the efficiency of the technology towards building a high performance transfer press for micro forming technology. To examine this possibility...... for actuation principle and mechanical grippers based on self-centering and friction principles. This study introduced a methodology for the analysis and characterization of this transfer system on component level and system level. Laser interferometry was used in combination with analytical models to predict...... the positioning ability of the actuator in a static as well as dynamic mode. In combination with an analysis of the grippers, a full description of the transfer precision inside the forming press was obtained. The current research involved integration of a handling system into an existing developed micro press...

Micro-pressing of rapeseed (Brassica napus L. and Arabidopsis thaliana seeds for evaluation of the oil extractability

Directory of Open Access Journals (Sweden)

Savoire Raphaëlle

2010-03-01

Full Text Available Pressing is a crucial step in the crushing process of rapeseed seeds, regarding its major effect on the oil extraction yield, the energy consumption and the quality of the meal. In order to study and model in a rigorous way the behaviour of rapeseed seeds, and the oil extraction during pressing, the potential of a micro-pressing technique using a instrumented micro press adapted to quantities of seeds as low as 10 g for rapeseed and 3 g for Arabidopsis thaliana was examined and discussed. Using a phenomenological model, data from the pressing process and the material behaviour (compressibility modules were obtained with a good precision, highlighting small differences between samples. The well-known positive effect of the temperature on the oil extraction yield was confirmed with A. thaliana. Micro-pressing of ground and cooked rapeseed seeds did not lead to the results usually reported in the literature for continuous pressing. The results strongly suggest that the performance of the static micro-pressing is related to the macro-and micro-structure of seeds and is less sensitive to the moisture than continuous pressing. Further experiments are needed to confirm that the micro-pressing could be an effective tool for predicting the extractability of oil and therefore, contribute to plant breeding programmes in the future.

Bioactive properties of faveleira (Cnidoscolus quercifolius) seeds, oil and press cake obtained during oilseed processing.

Science.gov (United States)

Ribeiro, Penha Patrícia Cabral; Silva, Denise Maria de Lima E; Assis, Cristiane Fernandes de; Correia, Roberta Targino Pinto; Damasceno, Karla Suzanne Florentino da Silva Chaves

2017-01-01

To the best of our knowledge, this is the first report in the literature concerning the bioactive properties of faveleira products. This work focuses on the physicochemical evaluation of faveleira oil, as well as it investigates the bioactive properties of faveleira seeds, faveleira oil and the press cake obtained during the oilseed processing. The seeds were cold pressed and the following tests were performed: physicochemical characteristics (acidity, peroxide values, moisture and volatile matter, density and viscosity) and fatty acid profile of faveleira oil; total phenolic and flavonoid content of faveleira seed and press cake; antibacterial activity of seed, oil and press cake; and antioxidant activity (DPPH radical scavenging activity, reducing power assay, total antioxidant capacity, superoxide radical scavenging assay and oxygen radical absorbance capacity) of seed, oil and press cake. Our work demonstrated that the faveleira seed oil has low acidity (0.78 ± 0.03% oleic acid) and peroxide value (1.13 ± 0.12 mEq/1000g), associated with the relevant concentration of linoleic acid (53.56%). It was observed that important phenolics (398.89 ± 6.34 mg EAG/100 g), especially flavonoids (29.81 ± 0.71 mg RE/g) remain in the press cake, which indicates that the by-product of the faveleira oilseed production constitutes a rich residual source of bioactive compounds. No bacterial growth inhibition was detected, but all samples including faveleira seeds, press cake, oil and its fractions have potent antioxidant activities, mainly the press cake, with oxygen radical absorbance capacity of 28.39 ± 4.36 μM TE/g. Our results also show that faveleira oil has potential to be used as edible oil and the press cake should be used to contain the most antioxidants from seed.

Ultra-low thermal conductivities of hot-pressed attapulgite and its potential as thermal insulation material

Energy Technology Data Exchange (ETDEWEB)

Liu, Yuan; Ren, Zhifeng, E-mail: bohr123@163.com, E-mail: zren@uh.edu [Department of Physics and TcSUH, University of Houston, Houston, Texas 77204 (United States); Wang, Xiuzhang [Department of Physics and TcSUH, University of Houston, Houston, Texas 77204 (United States); Hubei Key Laboratory of Pollutant Analysis and Reuse Technology and School of Physics and Electronic Science, Hubei Normal University, Huangshi, Hubei 435002 (China); Wang, Yumei [Department of Physics and TcSUH, University of Houston, Houston, Texas 77204 (United States); Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Tang, Zhongjia; Makarenko, Tatyana; Guloy, Arnold [Department of Chemistry, University of Houston, Houston, Texas 77204 (United States); Zhang, Qinyong, E-mail: bohr123@163.com, E-mail: zren@uh.edu [Center for Advanced Materials and Energy, Xihua University, Chengdu, Sichuan 610039 (China)

2016-03-07

In the past, there have been very few reports on thermal properties of attapulgite which is a widely used clay mineral. In this work, we report on extremely low thermal conductivities in attapulgite samples synthesized by hot-pressing. Attapulgite powder was hot-pressed at different temperatures into bulk samples, and a systematic study was conducted on the microstructures and thermal properties. Differential scanning calorimetry analysis shows that hot-pressing induces a rapid dehydration of the attapulgite powders. X-ray diffraction data and scanning/transmission electron microscopy reveal that the hot-pressed attapulgite features high porosity and complex microstructures, including an amorphous phase. As a result, the hot-pressed attapulgite exhibits thermal conductivity less than 2.5 W m{sup −1} K{sup −1} up to 600 °C. For one sample with porosity of 45.7%, the thermal conductivity is as low as 0.34 W m{sup −1} K{sup −1} at 50 °C. This suggests the potential of hot-pressed attapulgite as a candidate for thermal barrier materials.

Production of press moulds by plasma spray forming process

International Nuclear Information System (INIS)

Borisov, Y.; Myakota, I.; Polyakov, S.

2001-01-01

Plasma spray forming process for production of press moulds which are used for manufacture of articles from plastics was developed. The press moulds were produced by plasma spraying of Cu-Al-Fe-alloy powder on surface of a master model. The master models were made from non-metallic materials with heat resistance below 70 C (wood, gypsum etc). Double cooling system which provides for a control of surface model temperature and quenching conditions of sprayed material was designed. It made possible on the one hand to support model surface temperature below 70 C and on the other hand to provide for temperature conditions of martensite transformation in Cu-Al-system with a fixation of metastable ductile α + β 1 -phase. This allowed to decrease residual stresses in sprayed layer (up to 0,5-2,5 MPa), to increase microhardness of the coating material (up to 1200-1800 MPa) and its ductility (σ B = 70-105 MPa, δ = 6-12 %). This plasma spray forming process makes possible to spray thick layers (5-20 mm and more) without their cracking and deformation. The process is used for a production of press moulds which are applied in shoes industry, for fabrication of toys, souvenirs etc. (author)

Press-fit bipolar radial head arthroplasty, midterm results

NARCIS (Netherlands)

Kodde, Izaäk F.; Heijink, Andras; Kaas, Laurens; Mulder, Paul G. H.; van Dijk, C. Niek; Eygendaal, Denise

2016-01-01

Theoretical advantages of bipolar compared with monopolar radial head arthroplasty include better accommodation of radiocapitellar malalignment, reduction of capitellar abrasion, and reduction of stress at the bone-implant interfaces. Our purpose was to report the midterm results of press-fit

The antimatter. Press breakfast 23 may 2000; L'antimatiere. Petit dejeuner de presse 23 mai 2000

Energy Technology Data Exchange (ETDEWEB)

Spiro, M; Dejardin, M; Debu, P; Aleksan, R [CEA/Saclay, Dept. d' Astrophysique, de la Physique des Particules, de la Physique Nucleaire et de l' Instrumentation Associee (DAPNIA), 91 - Gif-sur-Yvette (France)

2000-05-01

This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

Vibration Control of a High-Speed Precision Servo Numerically Controlled Punching Press: Multidomain Simulation and Experiments

Directory of Open Access Journals (Sweden)

Teng Xu

2017-01-01

Full Text Available A three-degree-of-freedom mathematical vibration model of a high-speed punching press was developed in order to explore the vibration modes of the punching press. A multidomain model of the punching press was established to predict the kinematic state during different conditions, as well as the effects of load fluctuation on the motor speed. Experimental measurements of the acceleration of the punching press were carried out. The results comparison reveals that the multidomain model is consistent with the vibration model and the experimental measurements. Modal analysis and structure modification of the punching press were conducted. The foundation at the base of the punching press was improved against excess of vibration. The effects of the dimensions of the foundation on the vibration were discussed with the aid of the multidomain model. Finally, proper foundation design, able to reduce the vibration, was obtained.

Biological effects of the ionizing radiation. Press breakfast; Effets biologiques des rayonnements ionisants. Petit dejeuner de presse

Energy Technology Data Exchange (ETDEWEB)

Flury-Herard, A [CEA, Direction des Sciences du Vivant, DSV, 75 - Paris (France); Boiteux, S; Dutrillaux, B [CEA/Fontenay-aux-Roses, Direction des Sciences du Vivant, DSV, 92 (France); Toledano, M [CEA Saclay, Direction des Sciences du Vivant, DSV, 91 - Gif-sur-Yvette (France)

2000-06-01

This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

Press Ideology and Organizational Control in Hong Kong.

Science.gov (United States)

Chan, Joseph Man; Lee, Chin-Chuan

1988-01-01

Surveys the entire Chinese journalist population of Hong Kong to determine how news organizations in the highly politicized environment of Hong Kong exercise institutional control on recruitment and newswork. Finds that press ideology is a major determinant of its organizational control. (MS)

Seasonal variation of the flux of living coccolithophore communities in the Bay of Bengal and their implication on hydrography

Digital Repository Service at National Institute of Oceanography (India)

Mergulhao, L

). The systematics of coccoliths in relation to the palaeontological record. In: B.M. Funnell and W.R. Riedel (eds.), The Micropalaeontology of the Oceans. Cambridge Univ. Press, Cambridge, pp. 611-624. Bloesch, J. and N.M. Burns (1980). A critical review... (to 25°S, 100°E). Inst. of Oceanogr., Wormely, England, U.K. IOS Tech. Rep., 187, 36 charts, 8 pp. De Souza, S.N., S.W.A Naqvi and C.V.G Reddy (1981). Distribution of nutrients in the western Bay of Bengal. Indian J. Mar. Sci., 10, 327...

Bothid larvae (Pleuronectiformes - Pisces) of the Gulf of Thailand and South China Sea

Digital Repository Service at National Institute of Oceanography (India)

Devi, C.B.L.

, Paralichthidae and Bothidae). Kaiyo Kagaku, 11 (2): 100-110 (in Japanese). Amaoka, K., 1984. Bothidae in The fishes of the Japanese Archipelago edited by H. Masuda et al. Tokai Univ. Press. Tokyo. 347-350. 70 LALITHAMBIKA DEVI i Amaoka, K. and E. Yamamoto..., with notes on the species of genus Bothus in Japanese waters. J. Oceanogr. Soc. Jap., 1 (1-2) : 133-140. Kyusin, K., Amaoka, K., Nakaya, K., Ida., H., Tanino, Y. and Senta, T. 1982. Fishes of the S outh China Sea. Japan Fish. Reso. Res. Center, Tokyo 333 pp...

Development of load calculation techniques on screw and screw press energy consumption

OpenAIRE

Татарьянц, Максим Сергеевич; Завинский, Сергей Иванович; Трошин, Алексей Георгиевич

2015-01-01

The process of pressing of wood chips in screw machines is researched. It is defined processes taking place in different parts of the screw, formulas allowing to calculate the loads acting on the screw flights, as well as to determine the power required for compression. The unit costs of energy consumption and raw materials in the degree of heat pressing are determined

Create your own website using WordPress in a weekend

CERN Document Server

Moore, Alannah

2013-01-01

Having a website built can be a complicated and expensive undertaking. For large businesses this is a necessary expense, but for the ever-increasing number of independents and small businesses, this can easily be handled by the intrepid amateur. In Create Your Own Website Using WordPress in a Weekend, author Alannah Moore draws on her extensive experience to show how, in just a weekend, almost anyone can create a website in WordPress that looks professional and is entirely tailored to their needs and preferences. Through carefully structured step-by-step tutorials, the book takes the

Optimization of water removal in the press section of a paper machine

Directory of Open Access Journals (Sweden)

D. M. D. Drummond

2010-06-01

Full Text Available An optimization problem regarding water removal in the press section of a paper machine is considered in this work. The proposed model tries to minimize a cost function comprising the replacement of the felts in the press section, the cost of energy to operate the press and the cost of energy in the drying section, while satisfying the constraints of water mass balance in the process. The model is classified as a mixed-integer nonlinear program (MINLP in which the most important decisions are: a the sequence of paper to produce or when to produce the paper; b the need to exchange the felts; and c when to exchange the felts. Numerical examples are presented to illustrate the performance of the model.

Social Representations of the Environment in Press Media

Directory of Open Access Journals (Sweden)

Gislei Mocelin Polli

2015-08-01

Full Text Available Environmental issues are given prominence in the media and scientific circles. From the 60’s until early 2010 there were changes in the way people related to the environment, with a paradigm shift occurring regarding the environment. This study sought to identify the representational content disseminated by the press media on the environment in different periods. A qualitative survey was therefore conducted of documents, and data were obtained through texts published in a magazine with national circulation. The data were analyzed using the ALCESTE program with a Lexicographic Analysis. It was identified that the press media reflects the paradigm shifts, and publications dating from the late 60’s are compatible with the old paradigm, evolving over time, and are now compatible with the new environmental paradigm. The results indicate that currently the environment needs care in all its aspects and lack of care creates global impacts.

Contextual interference effects on the acquisition of skill and strength of the bench press.

Science.gov (United States)

Naimo, Marshall A; Zourdos, Michael C; Wilson, Jacob M; Kim, Jeong-Su; Ward, Emery G; Eccles, David W; Panton, Lynn B

2013-06-01

The purpose of this study was to investigate contextual interference effects on skill acquisition and strength gains during the learning of the bench press movement. Twenty-four healthy, college-aged males and females were stratified to control, high contextual interference (HCI), and low contextual interference (LCI) groups. Treatment groups were provided with written and visual instruction on proper bench press form and practiced the bench press and dart throwing for four weeks. Within each session, LCI performed all bench press sets before undertaking dart-throws. HCI undertook dart-throws immediately following each set of bench press. Control only did testing. Measurements, including one repetition maximum (1RM), checklist scores based on video recordings of participants' 1RM's, and dart-throw test scores were taken at pre-test, 1 week, 2 week, post-test, and retention test. Results were consistent with the basic premise of the contextual interference effect. LCI had significant improvements in percent 1RM and checklist scores during training, but were mostly absent after training (post-test and retention test). HCI had significant improvements in percent 1RM and checklist scores both during and after training. Thus, HCI may augment strength and movement skill on the bench press since proper technique is an important component of resistance exercise movements. Copyright © 2013 Elsevier B.V. All rights reserved.

Effect of pressing temperature on the mechanical properties of waste styrofoam filled sawdust composite

Science.gov (United States)

Nasution, H.; Harahap, H.; Riani, R.; Pelawi, A. I.

2018-02-01

This study has investigated the effect of pressing temperature on mechanical properties of waste styrofoam composite filled with sawdust. The waste styrofoam as the matrix was mixed with sawdust as filler and maleic anhydride (6%wt) as a compatibilizer. The weight fraction ratio between matrix and filler 70:30 (wt) and wood fiber size of 100 mesh were conducted. The pressing temperatures were investigated using a hot press with temperatures varied viz. 120, 130, 150, and 170 °C. Surface modification was applied to sawdust to diminish its polarity so that it could be compatible with the non-polar waste styrofoam matrix. Composites were evaluated using Instron and impact tester machine to investigate the tensile strength and impact strength of the material, respectively. The result indicated that tensile strength has decreased with the increase of pressing temperature where the largest tensile strength is at 130 °C of 33 MPa. The same trend has occurred on impact strength, where the value has reached of 300 J/cm2 on pressing temperature of 130 °C. From scanning electron microscopy (SEM) analysis it is also confirmed that during impact test, the resistance of the composite which has been pressed at the temperature of 130 °C have given better morphology than the composite at 170 °C.

Bench Press Upper-Body Muscle Activation Between Stable and Unstable Loads.

Science.gov (United States)

Dunnick, Dustin D; Brown, Lee E; Coburn, Jared W; Lynn, Scott K; Barillas, Saldiam R

2015-12-01

The bench press is one of the most commonly used upper-body exercises in training and is performed with many different variations, including unstable loads (ULs). Although there is much research on use of an unstable surface, there is little to none on the use of an UL. The purpose of this study was to investigate muscle activation during the bench press while using a stable load (SL) vs. UL. Twenty resistance-trained men (age = 24.1 ± 2 years; ht = 177.5 ± 5.8 cm; mass = 88.7 ± 13.7 kg) completed 2 experimental conditions (SL and UL) at 2 different intensities (60 and 80% one repetition maximum). Unstable load was achieved by hanging 16 kg kettlebells by elastic bands from the end of the bar. All trial lifts were set to a 2-second cadence with a slight pause at the bottom. Subjects had electrodes attached to 5 muscles (pectoralis major, anterior deltoid, medial deltoid, triceps brachii, and latissimus dorsi) and performed 3 isometric bench press trials to normalize electromyographic data. All 5 muscles demonstrated significantly greater activation at 80% compared with 60% load and during concentric compared with eccentric actions. These results suggest that upper body muscle activation is not different in the bench press between UL and SL. Therefore, coaches should use their preference when designing training programs.

Safe trapping of cesium into pollucite structure by hot-pressing method

International Nuclear Information System (INIS)

Omerašević, Mia; Matović, Ljiljana; Ružić, Jovana; Golubović, Željko; Jovanović, Uroš; Mentus, Slavko; Dondur, Vera

2016-01-01

A simple one-step method with direct thermal conversion at lower temperatures for preparing a stabile Cs-aluminsilicate phase, known as pollucite, is presented. Cs-exchanged form of Na, Ca-LTA type of zeolite (Cs-LTA) was pressureless sintered and hot pressed at certain temperatures in order to obtain pollucite. XRD and FTIR analysis were used to study structural changes of Cs-LTA before and after thermal treatments. Pressureless sintered sample recrystallized into pollucite phase after heat treatment at 1000 °C (3 h) (PLS1000) and hot pressed sample at 750 °C (3 h) using pressure of 35 MPa (HP750), indicating reduced temperature of 250°. SEM micrographs confirmed that HP750 has higher density than PLS1000 which leads to higher value of compressive strength. The HP750 showed better resistance to Cs leaching than the PLS1000. Base on these results one can conclude that hot pressing is the promising method for the permanent disposal of Cs radionuclides. - Highlights: • Na, Ca-LTA zeolite showed high affinity for Cs ions. • Pollucite phase was obtained using hot pressing at temperature as low as ​750 °C. • HP750 shows better mechanical and morphological properties than PLS1000. • HP750 has lower leaching rate of Cs ions than PLS1000.