Investigation of human system interface design in nuclear power plant

International Nuclear Information System (INIS)

Feng Yan; Zhang Yunbo; Wang Zhongqiu

2012-01-01

The paper introduces the importance of HFE in designing nuclear power plant, and introduces briefly the content and scope of HFE, discusses human system interface design of new built nuclear power plants. This paper also describes human system interface design of foreign nuclear power plant, and describes in detail human system interface design of domestic nuclear power plant. (authors)

Human machine interface for research reactor instrumentation and control system

International Nuclear Information System (INIS)

Mohd Sabri Minhat; Mohd Idris Taib; Izhar Abu Hussin; Zareen Khan Abdul Jalil Khan; Nurfarhana Ayuni Joha

2010-01-01

Most present design of Human Machine Interface for Research Reactor Instrumentation and Control System is modular-based, comprise of several cabinets such as Reactor Protection System, Control Console, Information Console as well as Communication Console. The safety, engineering and human factor will be concerned for the design. Redundancy and separation of signal and power supply are the main factor for safety consideration. The design of Operator Interface absolutely takes consideration of human and environmental factors. Physical parameters, experiences, trainability and long-established habit patterns are very important for user interface, instead of the Aesthetic and Operator-Interface Geometry. Physical design for New Instrumentation and Control System of RTP are proposed base on the state-of- the-art Human Machine Interface design. (author)

Attempt on construction of human friendly man-machine interface. Study and apply about human communication; Human friendly na man machine interface kochiku no kokoromi. Ningen no communication no kento to sono oyo

Energy Technology Data Exchange (ETDEWEB)

Tatsuno, J. [Tokyo University of Agriculture, Tokyo (Japan); Kokubo, Y.; Matsumura, I.; Kobayashi, H. [Hosei University, Tokyo (Japan)

1998-04-01

This paper describes an attempt on a construction way of human friendly man-machine interface. At first, we do a simple experiment to find out the characteristic of human verbal communication. From the experimental results, we get some rules in case in human verbal communication. We construct the man-machine interface which is based on these rules. Through teaching process, we examine our verbal communication interface comparing with conventional interfaces. From this comparison, we recognize that the verbal communication interface is valid to construct the user-friendly man-machine interface. 12 refs., 9 figs., 2 tabs.

Interfacing Nuclear Security and Safeguards through Education and Support Centre Networks

International Nuclear Information System (INIS)

Nikonov, D.

2015-01-01

This paper presents the work of the International Nuclear Security Education Network (INSEN) and the International Nuclear Security Training and Support Centre Network (NSSC) as the means to achieve sustainable human resource development in member states. The paper also examines how both security and safeguards can benefit from collaborative and coordinated activities when such networks focus on practical achievements. (author)

Human-Manipulator Interface Using Particle Filter

Directory of Open Access Journals (Sweden)

Guanglong Du

2014-01-01

Full Text Available This paper utilizes a human-robot interface system which incorporates particle filter (PF and adaptive multispace transformation (AMT to track the pose of the human hand for controlling the robot manipulator. This system employs a 3D camera (Kinect to determine the orientation and the translation of the human hand. We use Camshift algorithm to track the hand. PF is used to estimate the translation of the human hand. Although a PF is used for estimating the translation, the translation error increases in a short period of time when the sensors fail to detect the hand motion. Therefore, a methodology to correct the translation error is required. What is more, to be subject to the perceptive limitations and the motor limitations, human operator is hard to carry out the high precision operation. This paper proposes an adaptive multispace transformation (AMT method to assist the operator to improve the accuracy and reliability in determining the pose of the robot. The human-robot interface system was experimentally tested in a lab environment, and the results indicate that such a system can successfully control a robot manipulator.

Through the Interface - a human activity approach to user interfaces

DEFF Research Database (Denmark)

Bødker, Susanne

In providing a theoretical framework for understanding human- computer interaction as well as design of user interfaces, this book combines elements of anthropology, psychology, cognitive science, software engineering, and computer science. The framework examines the everyday work practices of us...

Human-machine Interface for Presentation Robot

Czech Academy of Sciences Publication Activity Database

Krejsa, Jiří; Ondroušek, V.

2012-01-01

Roč. 6, č. 2 (2012), s. 17-21 ISSN 1897-8649 Institutional research plan: CEZ:AV0Z20760514 Keywords : human-robot interface * mobile robot * presentation robot Subject RIV: JD - Computer Applications, Robotics

Ultimate and proximate explanations of strong reciprocity.

Science.gov (United States)

Vromen, Jack

2017-08-23

Strong reciprocity (SR) has recently been subject to heated debate. In this debate, the "West camp" (West et al. in Evol Hum Behav 32(4):231-262, 2011), which is critical of the case for SR, and the "Laland camp" (Laland et al. in Science, 334(6062):1512-1516, 2011, Biol Philos 28(5):719-745, 2013), which is sympathetic to the case of SR, seem to take diametrically opposed positions. The West camp criticizes advocates of SR for conflating proximate and ultimate causation. SR is said to be a proximate mechanism that is put forward by its advocates as an ultimate explanation of human cooperation. The West camp thus accuses advocates of SR for not heeding Mayr's original distinction between ultimate and proximate causation. The Laland camp praises advocates of SR for revising Mayr's distinction. Advocates of SR are said to replace Mayr's uni-directional view on the relation between ultimate and proximate causes by the bi-directional one of reciprocal causation. The paper argues that both the West camp and the Laland camp misrepresent what advocates of SR are up to. The West camp is right that SR is a proximate cause of human cooperation. But rather than putting forward SR as an ultimate explanation, as the West camp argues, advocates of SR believe that SR itself is in need of ultimate explanation. Advocates of SR tend to take gene-culture co-evolutionary theory as the correct meta-theoretical framework for advancing ultimate explanations of SR. Appearances notwithstanding, gene-culture coevolutionary theory does not imply Laland et al.'s notion of reciprocal causation. "Reciprocal causation" suggests that proximate and ultimate causes interact simultaneously, while advocates of SR assume that they interact sequentially. I end by arguing that the best way to understand the debate is by disambiguating Mayr's ultimate-proximate distinction. I propose to reserve "ultimate" and "proximate" for different sorts of explanations, and to use other terms for distinguishing

Human-centred Methods of Social and Technical Design

DEFF Research Database (Denmark)

Rasmussen, Lauge Baungaard

Different inderstandings of design are presented.The historical background of human-centred designis described.Methods of social shaping are described in detailand the author's research experiences with using these methods in differentinternational projects presented and a model tointegrate...... technical and social perspective of design is suggested....

Project and implementation of the human/system interface laboratory

International Nuclear Information System (INIS)

Carvalho, Paulo Victor R. de; Obadia, Isaac Jose; Vidal, Mario Cesar Rodriguez

2002-01-01

Analog instrumentation is being increasingly replaced by digital technology in new nuclear power plants, such as Angra III, as well as in existing operating plants, such as Angra I and II, for modernization and life-extension projects. In this new technological environment human factors issues aims to minimize failures in nuclear power plants operation due to human error. It is well known that 30% to 50% of the detected unforeseen problems involve human errors. Presently, human factors issues must be considered during the development of advanced human-system interfaces for the plant. IAEA has considered the importance of those issues and has published TECDOC's and Safety Series Issues on the matter. Thus, there is a need to develop methods and criteria to asses, compare, optimize and validate the human-system interface associated with totally new or hybrid control rooms. Also, the use of computer based operator aids is en evolving area. In order to assist on the development of methods and criteria and to evaluate the effects of the new design concepts and computerized support systems on operator performance, research simulators with advanced control rooms technology, such the IEN's Human System Interface Laboratory, will provide the necessary setting. (author)

Human-Centric Interfaces for Ambient Intelligence

CERN Document Server

Aghajan, Hamid; Delgado, Ramon Lopez-Cozar

2009-01-01

To create truly effective human-centric ambient intelligence systems both engineering and computing methods are needed. This is the first book to bridge data processing and intelligent reasoning methods for the creation of human-centered ambient intelligence systems. Interdisciplinary in nature, the book covers topics such as multi-modal interfaces, human-computer interaction, smart environments and pervasive computing, addressing principles, paradigms, methods and applications. This book will be an ideal reference for university researchers, R&D engineers, computer engineers, and graduate s

Advanced human-system interface design review guidelines

International Nuclear Information System (INIS)

O'Hara, J.M.

1990-01-01

Advanced, computer-based, human-system interface designs are emerging in nuclear power plant (NPP) control rooms. These developments may have significant implications for plant safety in that they will greatly affect the ways in which operators interact with systems. At present, however, the only guidance available to the US Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces, NUREG-0700, was written prior to these technological changes and is thus not designed to address them. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline for use in performing human factors reviews of advanced operator interfaces. This guideline will be implemented, in part, as a portable, computer-based, interactive document for field use. The paper describes the overall guideline development methodology, the present status of the document, and the plans for further guideline testing and development. 21 refs., 3 figs

Human-Centred Design: sustainable ideas and scenarios for the development of projects and products based on knowledge and human abilities

OpenAIRE

Sbordone, Maria Antonietta

2008-01-01

Human-Centred Design is defined as the discipline relating to products and services that, in different ways, takes into account the psycho-physical wellness of human beings, and is formulated according to an approach based on User-Centred Design (UCD). The User-Centred Design approach considers the relationships and the interactions users have with products while using them, and is developed within disciplines not properly belonging to the field of design. At the beginning of last century, wi...

Human Reliability and the Current Dilemma in Human-Machine Interface Design Strategies

International Nuclear Information System (INIS)

Passalacqua, Roberto; Yamada, Fumiaki

2002-01-01

Since human error dominates the probability of failures of still-existing human-requiring systems (as the Monju reactor), the human-machine interface needs to be improved. Several rationales may lead to the conclusion that 'humans' should limit themselves to monitor the 'machine'. For example, this is the trend in the aviation industry: newest aircrafts are designed to be able to return to a safe state by the use of control systems, which do not need human intervention. Thus, the dilemma whether we really need operators (for example in the nuclear industry) might arise. However, social-technical approaches in recent human error analyses are pointing out the so-called 'organizational errors' and the importance of a human-machine interface harmonization. Typically plant's operators are a 'redundant' safety system with a much lower reliability (than the machine): organizational factors and harmonization requirements suggest designing the human-machine interface in a way that allows improvement of operator's reliability. In addition, taxonomy studies of accident databases have also proved that operators' training should promote processes of decision-making. This is accomplished in the latest trends of PSA technology by introducing the concept of a 'Safety Monitor' that is a computer-based tool that uses a level 1 PSA model of the plant. Operators and maintenance schedulers of the Monju FBR will be able to perform real-time estimations of the plant risk level. The main benefits are risk awareness and improvements in decision-making by operators. Also scheduled maintenance can be approached in a more rational (safe and economic) way. (authors)

Decomobil, Deliverable 3.6, Human Centred Design for Safety Critical Transport Systems

OpenAIRE

PAUZIE, Annie; MENDOZA, Lucile; SIMOES, Anabela; BELLET, Thierry; MOREAU, Fabien

2014-01-01

The scientific seminar on 'Human Centred Design for Safety Critical Transport Systems' organized in the framework of DECOMOBIL has been held the 8th of September 2014 in Lisbon, Portugal, hosted by ADI/ISG. The aims of the event were to present the scientific problematic related to the safety of the complex transport systems and the increasing importance of human-­centred design, with a specific focus on Resilience Engineering concept, a new approach to safety management in highly complex sys...

A human activity approach to User Interfaces

DEFF Research Database (Denmark)

Bødker, Susanne

1989-01-01

the work situations in which computer-based artifacts are used: The framework deals with the role of the user interface in purposeful human work. Human activity theory is used in this analysis. The purpose of this article is to make the reader curious and hopefully open his or her eyes to a somewhat...

A Classification of Human-to-Human Communication during the Use of Immersive Teleoperation Interfaces

DEFF Research Database (Denmark)

Kraus, Martin; Kibsgaard, Martin

2015-01-01

We propose a new classification of the human-to-human communication during the use of immersive teleoperation interfaces based on real-life examples. While a large body of research is concerned with communication in collaborative virtual environments (CVEs), less research focuses on cases where...... of the proposed classification to real environments can offer useful reference cases. Using this extended classification not only allows us to discuss and understand differences and similarities of various forms of communication in a more systematic way, but it also provides guidelines and reference cases...... for the design of immersive teleoperation interfaces that support human-to-human communication....

Human-system interface for CAREM nuclear reactor

International Nuclear Information System (INIS)

Abaurre, Norberto F.; Flury, Celso A.; Pierini, Juan P.; Etchepareborda, Andres; Breitembuecher, Alfredo J.; Lema, Fabian M.

2009-01-01

Associated with activities to be developed by our working group on the construction of the reactor training simulator for the CAREM, we have planned the design of human-system interface (HSI) of the main control room. The goal of this study is to describe the planning and methodology used for the HSI interface design. The products of this process are the layout specifications of the Control Room and the screens specifications for control software. (author)

One health: The interface between veterinary and human health

Directory of Open Access Journals (Sweden)

Kshitiz Shrestha

2018-01-01

Full Text Available One Health is an emerging global key concept integrating human and animal health through international research and policy. The complex relationships between the human and animal have resulted in a human-animal-environment interface since prehistorical times. The people, animals, plants, and the environment are so intrinsically linked that prevention of risks and the mitigation of effects of crises that originate at the interface between humans, animals, and their environments can only improve health and wellbeing. The “One Health” approach has been successfully implemented in numerous projects around the world. The containment of pandemic threats such as avian influenza and severe acute respiratory syndrome within months of outbreak are few examples of successful applications of the One Health paradigm. The paper begins with a brief overview of the human-animal interface and continues with the socio-economic and public health impact caused by various zoonotic diseases such as Middle East respiratory syndrome, Influenza, and Ebola virus. This is followed by the role of “One Health” to deal the global problem by the global solution. It emphasizes the interdisciplinary collaboration, training for health professionals and institutional support to minimize global health threats due to infectious diseases. The broad definition of the concept is supposed to lead multiple interpretations that impede the effective implementation of One Health approach within veterinary profession, within the medical profession, by wildlife specialists and by environmentalists, while on the other side, it gives a value of interdisciplinary collaboration for reducing threats in human-animal-environment interface.

Development of Multimodal Human Interface Technology

Science.gov (United States)

Hirose, Michitaka

About 20 years have passed since the word “Virtual Reality” became popular. During these two decades, novel human interface technology so called “multimodal interface technology” has been formed. In this paper, firstly, recent progress in realtime CG, BCI and five senses IT is quickly reviewed. Since the life cycle of the information technology is said to be 20 years or so, novel directions and paradigms of VR technology can be found in conjunction with the technologies forementioned. At the end of the paper, these futuristic directions such as ultra-realistic media are briefly introduced.

Human Factors and Their Effects on Human-Centred Assembly Systems - A Literature Review-Based Study

Science.gov (United States)

Wang, Q.; Abubakar, M. I.

2017-09-01

If a product has more than one component, then it must be assembled. Assembly of products relies on assembly systems or lines in which assembly of each product is often carried out manually by human workers following assembly sequences in various forms. It is widely understood that efficiency of assembling a product by reducing assembly times (therefore costs) is vital particularly for small and medium-sized manufacturing companies to survive in an increasingly competitive market. Ideally, it is helpful for pre-determining efficiency or productivity of a human-centred assembly system at the early design stage. To date, most research on performance of an assembly system using modelling simulation methods is focused on its “operational functions”. The term used in a narrow sense always indicates the performance of the “operational system”, which does not incorporate the effect of human factors that may also affect the system performance. This paper presents a research outcome of findings through a literature review-based study by identifying possible human factors that mostly affect the performance on human-centred manufacturing systems as part of the research project incorporating parameters of human factors into a DES (discrete event simulation) tool.

Human-system Interfaces for Automatic Systems

Energy Technology Data Exchange (ETDEWEB)

OHara, J.M.; Higgins,J. (BNL); Fleger, S.; Barnes V. (NRC)

2010-11-07

Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, our study identified several topics for additional research.

An architecture for human-network interfaces

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1990-01-01

Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...

Flexible human machine interface for process diagnostics

International Nuclear Information System (INIS)

Reifman, J.; Graham, G.E.; Wei, T.Y.C.; Brown, K.R.; Chin, R.Y.

1996-01-01

A flexible human machine interface to design and display graphical and textual process diagnostic information is presented. The system operates on different computer hardware platforms, including PCs under MS Windows and UNIX Workstations under X-Windows, in a client-server architecture. The interface system is customized for specific process applications in a graphical user interface development environment by overlaying the image of the process piping and instrumentation diagram with display objects that are highlighted in color during diagnostic display. Customization of the system is presented for Commonwealth Edison's Braidwood PWR Chemical and Volume Control System with transients simulated by a full-scale operator-training simulator and diagnosed by a computer-based system

User Interface Aspects of a Human-Hand Simulation System

Directory of Open Access Journals (Sweden)

Beifang Yi

2005-10-01

Full Text Available This paper describes the user interface design for a human-hand simulation system, a virtual environment that produces ground truth data (life-like human hand gestures and animations and provides visualization support for experiments on computer vision-based hand pose estimation and tracking. The system allows users to save time in data generation and easily create any hand gestures. We have designed and implemented this user interface with the consideration of usability goals and software engineering issues.

Stress distribution difference between Lava Ultimate full crowns and IPS e.max CAD full crowns on a natural tooth and on tooth-shaped implant abutments.

Science.gov (United States)

Krejci, Ivo; Daher, René

2017-04-01

The goal of this short communication is to present finite element analysis comparison of the stress distribution between CAD/CAM full crowns made of Lava Ultimate and of IPS e.max CAD, adhesively luted to natural teeth and to implant abutments with the shape of natural teeth. Six 3D models were prepared using a 3D content-creating software, based on a micro-CT scan of a human mandibular molar. The geometry of the full crown and of the abutment was the same for all models representing Lava Ultimate full crowns (L) and IPS e.max CAD full crowns (E) on three different abutments: prepared natural tooth (n), titanium abutment (t) and zirconia abutment (z). A static load of 400 N was applied on the vestibular and lingual cusps, and fixtures were applied to the base of the models. After running the static linear analysis, the post-processing data we analyzed. The stress values at the interface between the crown and the abutment of the Lt and Lz groups were significantly higher than the stress values at the same interface of all the other models. The high stress concentration in the adhesive at the interface between the crown and the abutment of the Lava Ultimate group on implants might be one of the factors contributing to the reported debondings of crowns.

Ultimate justification: Wittgenstein and medical ethics.

Science.gov (United States)

Hughes, J

1995-02-01

Decisions must be justified. In medical ethics various grounds are given to justify decisions, but ultimate justification seems illusory and little considered. The philosopher Wittgenstein discusses the problem of ultimate justification in the context of general philosophy. His comments, nevertheless, are pertinent to ethics. From a discussion of Wittgensteinian notions, such as 'bedrock', the idea that 'ultimate' justification is grounded in human nature as such is derived. This discussion is relevant to medical ethics in at least five ways: it shows generally what type of certainty there is in practical ethics; it seems to imply some objective foundation to our ethical judgements; it squares with our experience of making ethical decisions; it shows something of the nature of moral arguments; and, finally, it has implications for teaching medicine and ethics.

Auditory interfaces: The human perceiver

Science.gov (United States)

Colburn, H. Steven

1991-01-01

A brief introduction to the basic auditory abilities of the human perceiver with particular attention toward issues that may be important for the design of auditory interfaces is presented. The importance of appropriate auditory inputs to observers with normal hearing is probably related to the role of hearing as an omnidirectional, early warning system and to its role as the primary vehicle for communication of strong personal feelings.

Human-centred automation: an explorative study

International Nuclear Information System (INIS)

Hollnagel, Erik; Miberg, Ann Britt

1999-05-01

The purpose of the programme activity on human-centred automation at the HRP is to develop knowledge (in the form of models and theories) and tools (in the form of techniques and simulators) to support design of automation that ensures effective human performance and comprehension. This report presents the work done on both the analytical and experimental side of this project. The analytical work has surveyed common definitions of automation and traditional design principles. A general finding is that human-centred automation usually is defined in terms of what it is not. This is partly due to a lack of adequate models and of human-automation interaction. Another result is a clarification of the consequences of automation, in particular with regard to situation awareness and workload. The experimental work has taken place as an explorative experiment in HAMMLAB in collaboration with IPSN (France). The purpose of this experiment was to increase the understanding of how automation influences operator performance in NPP control rooms. Two different types of automation (extensive and limited) were considered in scenarios having two different degrees of complexity (high and low), and involving diagnostic and procedural tasks. Six licensed NPP crews from the NPP at Loviisa, Finland, participated in the experiment. The dependent variables applied were plant performance, operator performance, self-rated crew performance, situation awareness, workload, and operator trust in the automation. The results from the diagnostic scenarios indicated that operators' judgement of crew efficiency was related to their level of trust in the automation, and further that operators trusted automation least and rated crew performance lowest in situations where crew performance was efficient and vice versa. The results from procedural scenarios indicated that extensive automation efficiently supported operators' performance, and further that operator' judgement of crew performance efficiency

Study and simulation of human interface; Human interface kenkyu to simulation

Energy Technology Data Exchange (ETDEWEB)

Nishitani, H. [Nara Institute of Science and Technology, Nara (Japan)

1996-10-05

Validation researches have begun about the interrelationship between systems and human beings using a virtual-reality plant environment. This article introduces some recent studies about the human interface in an operation control system in a virtual-reality environment. The evaluation of a system from the viewpoint of ease of use is called a usability test, to which a psychological protocol analysis is applied for finding out problematic points by carefully observing the operator actually operating the system. For instance, in a boiler plant simulator constructed for DCS training, the operator is given some tasks, such as the prediction as to how a certain event will develop, probing of the cause of anomalies, and execution of related operations. Video cameras are installed at various spots for the minute observation of facial expressions and behavior of the operator, and the operator`s recognition, thought, behavior, and utterances, expressed by the operator facially or verbally, are recorded and analyzed, and the results are utilized for system improvement and operator training. 3 refs., 2 figs.

Investigation of human-robot interface performance in household environments

Science.gov (United States)

Cremer, Sven; Mirza, Fahad; Tuladhar, Yathartha; Alonzo, Rommel; Hingeley, Anthony; Popa, Dan O.

2016-05-01

Today, assistive robots are being introduced into human environments at an increasing rate. Human environments are highly cluttered and dynamic, making it difficult to foresee all necessary capabilities and pre-program all desirable future skills of the robot. One approach to increase robot performance is semi-autonomous operation, allowing users to intervene and guide the robot through difficult tasks. To this end, robots need intuitive Human-Machine Interfaces (HMIs) that support fine motion control without overwhelming the operator. In this study we evaluate the performance of several interfaces that balance autonomy and teleoperation of a mobile manipulator for accomplishing several household tasks. Our proposed HMI framework includes teleoperation devices such as a tablet, as well as physical interfaces in the form of piezoresistive pressure sensor arrays. Mobile manipulation experiments were performed with a sensorized KUKA youBot, an omnidirectional platform with a 5 degrees of freedom (DOF) arm. The pick and place tasks involved navigation and manipulation of objects in household environments. Performance metrics included time for task completion and position accuracy.

Techniques and applications for binaural sound manipulation in human-machine interfaces

Science.gov (United States)

Begault, Durand R.; Wenzel, Elizabeth M.

1992-01-01

The implementation of binaural sound to speech and auditory sound cues (auditory icons) is addressed from both an applications and technical standpoint. Techniques overviewed include processing by means of filtering with head-related transfer functions. Application to advanced cockpit human interface systems is discussed, although the techniques are extendable to any human-machine interface. Research issues pertaining to three-dimensional sound displays under investigation at the Aerospace Human Factors Division at NASA Ames Research Center are described.

A Distributed Tactile Sensor for Intuitive Human-Robot Interfacing

Directory of Open Access Journals (Sweden)

Andrea Cirillo

2017-01-01

Full Text Available Safety of human-robot physical interaction is enabled not only by suitable robot control strategies but also by suitable sensing technologies. For example, if distributed tactile sensors were available on the robot, they could be used not only to detect unintentional collisions, but also as human-machine interface by enabling a new mode of social interaction with the machine. Starting from their previous works, the authors developed a conformable distributed tactile sensor that can be easily conformed to the different parts of the robot body. Its ability to estimate contact force components and to provide a tactile map with an accurate spatial resolution enables the robot to handle both unintentional collisions in safe human-robot collaboration tasks and intentional touches where the sensor is used as human-machine interface. In this paper, the authors present the characterization of the proposed tactile sensor and they show how it can be also exploited to recognize haptic tactile gestures, by tailoring recognition algorithms, well known in the image processing field, to the case of tactile images. In particular, a set of haptic gestures has been defined to test three recognition algorithms on a group of 20 users. The paper demonstrates how the same sensor originally designed to manage unintentional collisions can be successfully used also as human-machine interface.

Human-centered design of the human-system interfaces of medical equipment: thyroid uptake system

International Nuclear Information System (INIS)

Monteiro, Jonathan K.R.; Farias, Marcos S.; Santos, Isaac J.A. Luquetti; Monteiro, Beany G.

2013-01-01

Technology plays an important role in modern medical centers, making healthcare increasingly complex, relying on complex technical equipment. This technical complexity is particularly noticeable in the nuclear medicine. Poorly design human-system interfaces can increase the risks for human error. The human-centered approach emphasizes the development of the equipment with a deep understanding of the users activities, current work practices, needs and abilities of the users. An important concept of human-centered design is that the ease-of-use of the equipment can be ensured only if users are actively incorporated in all phases of the life cycle of design process. Representative groups of users are exposed to the equipment at various stages in development, in a variety of testing, evaluation and interviewing situations. The users feedback obtained is then used to refine the design, with the result serving as input to the next interaction of design process. The limits of the approach are that the users cannot address any particular future needs without prior experience or knowledge about the equipment operation. The aim of this paper is to present a methodological framework that contributes to the design of the human-system interfaces, through an approach related to the users and their activities. A case study is described in which the methodological framework is being applied in development of new human-system interfaces of the thyroid uptake system. (author)

An exploration of person-centred concepts in human services: A thematic analysis of the literature.

Science.gov (United States)

Waters, Rebecca A; Buchanan, Angus

2017-10-01

Being 'person-centred' in the delivery of health and human services has become synonymous with quality care, and it is a core feature of policy reform in Australia and other Western countries. This research aimed to identify the uses, definitions and characteristics of the term 'person-centred' in the ageing, mental health and disability literature. A thematic analysis identified seven common core themes of person-centredness: honouring the person, being in relationship, facilitating participation and engagement, social inclusion/citizenship, experiencing compassionate love, being strengths/capacity focussed, and organisational characteristics. These suggest a set of higher-order experiences for people that are translated differently in different human services. There is no common definition of what it means to be person-centred, despite being a core feature of contemporary health and human service policy, and this suggests that its inclusion facilitates further misunderstanding and misinterpretation. A common understanding and policy conceptualisation of person-centredness is likely to support quality outcomes in service delivery especially where organisations work across human service groups. Further research into the application and service expressions of being 'person-centred' in context is necessary. Copyright © 2017 Elsevier B.V. All rights reserved.

Design for the human-machine interface of a digitalized reactor control-room

International Nuclear Information System (INIS)

Qu Ronghong; Zhang Liangju; Li Duo; Yu Hui

2005-01-01

Digitalized technology is implemented in the instrumentation and control system of an in-construction research reactor, which advances information display in both contents and styles in a nuclear reactor control-room, and greatly improves human-machine interface. In the design for a digitalized nuclear reactor control-room there are a series of new problems and technologies should be considered seriously. This paper mainly introduces the design for the digitalized control-room of the research nuclear reactor and covered topics include design principle of human-machine interface, organization and classification of interface graphics, technologies and principles based on human factors engineering and implemented in the graphics design. (authors)

Principle of human system interface (HSI) design for new reactor console of PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Zareen Khan Abdul Jalil Khan; Ridzuan Abdul Mutalib; Mohd Idris Taib; Mohd Khairulezwan Abdul Manan; Nurfarhana Ayuni Joha; Mohd Sabri Minhat; Izhar Abu Hussin

2013-01-01

Full-text: This paper will describe the principle of human system interface design for new reactor console in control room at TRIGA reactor facility. In order to support these human system interface challenges in digital reactor console. Software-based instrumentation and control (I and C) system for new reactor console could lead to new human machine integration. The proposed of Human System Interface (HSI) which included the large display panels which shows reactor status, compact and computer-based workstations for monitoring, control and protection function. The proposed Human System Interface (HIS) has been evaluated using various human factor engineering. It can be concluded that the Human System Interface (HIS) is designed as to address the safety related computer controlled system. (author)

Integrated Human Factors Design Guidelines for Sound Interface

International Nuclear Information System (INIS)

Lee, Jung Woon; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul; Cha, Woo Chang

2004-05-01

Digital MMI, such as CRT, LCD etc., has been used increasingly in the design of main control room of the Korean standard nuclear power plants following the YGN units 3 and 4. The utilization of digital MMI may introduce various kind of sound interface into the control room design. In this project, for five top-level guideline items, including Sound Formats, Alarms, Sound Controls, Communications, and Environments, a total of 147 detail guidelines were developed and a database system for these guidelines was developed. The integrated human factors design guidelines for sound interface and the database system developed in this project will be useful for the design of sound interface of digital MMI in Korean NPPs

Integrated Human Factors Design Guidelines for Sound Interface

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul [KAERI, Daejeon (Korea, Republic of); Cha, Woo Chang [Kumoh National Univ. of Technology, Gumi (Korea, Republic of)

2004-05-15

Digital MMI, such as CRT, LCD etc., has been used increasingly in the design of main control room of the Korean standard nuclear power plants following the YGN units 3 and 4. The utilization of digital MMI may introduce various kind of sound interface into the control room design. In this project, for five top-level guideline items, including Sound Formats, Alarms, Sound Controls, Communications, and Environments, a total of 147 detail guidelines were developed and a database system for these guidelines was developed. The integrated human factors design guidelines for sound interface and the database system developed in this project will be useful for the design of sound interface of digital MMI in Korean NPPs.

Ultimately short ballistic vertical graphene Josephson junctions

Science.gov (United States)

Lee, Gil-Ho; Kim, Sol; Jhi, Seung-Hoon; Lee, Hu-Jong

2015-01-01

Much efforts have been made for the realization of hybrid Josephson junctions incorporating various materials for the fundamental studies of exotic physical phenomena as well as the applications to superconducting quantum devices. Nonetheless, the efforts have been hindered by the diffusive nature of the conducting channels and interfaces. To overcome the obstacles, we vertically sandwiched a cleaved graphene monoatomic layer as the normal-conducting spacer between superconducting electrodes. The atomically thin single-crystalline graphene layer serves as an ultimately short conducting channel, with highly transparent interfaces with superconductors. In particular, we show the strong Josephson coupling reaching the theoretical limit, the convex-shaped temperature dependence of the Josephson critical current and the exceptionally skewed phase dependence of the Josephson current; all demonstrate the bona fide short and ballistic Josephson nature. This vertical stacking scheme for extremely thin transparent spacers would open a new pathway for exploring the exotic coherence phenomena occurring on an atomic scale. PMID:25635386

Design and Evaluation of Human System Interfaces (HSIs)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the

Design and Evaluation of Human System Interfaces (HSIs)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the Proceedings of the

Design and Evaluation of Human System Interfaces (HSIs)

International Nuclear Information System (INIS)

2003-01-01

In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the Proceedings of the

The Halden Reactor Project workshop meeting on human centred automation and function allocation methods

International Nuclear Information System (INIS)

Sebok, Angelia; Green, Marit; Larsen, Marit; Miberg, Ann Britt; Morisseau, Dolores

1998-02-01

A workshop on Human Centred Automation (HCA) and Function Allocation Methods was organised in Halden, September 29-30, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the Halden Project research agenda. The workshop meeting began with several presentations summarising current issues in HCA, Function Allocation Methods and Functional Modelling. Invited speakers presented their research or modelling efforts. Following the presentations, the workshop was divided into three working groups, all tasked with answering the same four questions: (1) What are the most important issues in Human Centred Automation? (2) Which strengths could be achieved by integrating Functional Modelling Methods into experimental Human Centred Automation research? (3) How should analytical and experimental methods be balanced? (4) What are the most important aspects in automation design methodology? Each group discussed the questions and produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. (author)

HRD initiatives to realize the Mission Programmes of Indira Gandhi Centre for Atomic Research

International Nuclear Information System (INIS)

Baldev Raj; Sai Baba, M.; Sundararajan, Vidya; Srikanthan, R.; Madanmohan, Jalaja; Venugopal Rao, G.

2009-01-01

IGCAR has developed the expertise and built comprehensive facilities to realize the mission programme of the Centre. The efforts would lead to achieving the world leadership and meet the expectation and aspiration of the nation for ensuring energy security. Taking into consideration the enhanced role FBRs are likely to play in contributing to the nuclear power component of the nation, there is a need to augment skilled manpower for the critical assignments to take up challenges in the design of plant, development of equipment and processes. Thus human resource development has been one of the areas of emphasis in the management philosophy of the Centre. Initiating the Training School programme at Kalpakkam, identifying research scholars to take up the problems in interface areas for achieving breakthroughs, attracting young people and empowering them has been the 'mantra' adopted at the Centre. Multilevel mentoring process has been built in and mentoring the young talent has been our priority. In this paper, we discuss our approach to overall human resource development at our Centre

Human-computer interface incorporating personal and application domains

Science.gov (United States)

Anderson, Thomas G [Albuquerque, NM

2011-03-29

The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.

Advanced human-system interface design review guidelines

International Nuclear Information System (INIS)

O'Hara, J.M.

1990-01-01

Advanced, computer-based, human-system interface designs are emerging in nuclear power plant control rooms as a result of several factors. These include: (1) incorporation of new systems such as safety parameter display systems, (2) backfitting of current control rooms with new technologies when existing hardware is no longer supported by equipment vendors, and (3) development of advanced control room concepts. Control rooms of the future will be developed almost exclusively with advanced instrumentation and controls based upon digital technology. In addition, the control room operator will be interfacing with more intelligent systems which will be capable of providing information processing support to the operator. These developments may have significant implications for plant safety in that they will greatly affect the operator's role in the system as well as the ways in which he interacts with it. At present, however, the only guidance available to the Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces is NUREG-0700. It is a document which was written prior to these technological changes and is, therefore, tailored to the technologies used in traditional control rooms. Thus, the present guidance needs to be updated since it is inadequate to serve as the basis for NRC staff review of such advanced or hybrid control room designs. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline suitable for use in performing human factors reviews of advanced operator interfaces. This guideline will take the form of a portable, interactive, computer-based document that may be conveniently used by an inspector in the field, as well as a text-based document

Human factors evaluation of teletherapy: Human-system interfaces and procedures. Volume 3

International Nuclear Information System (INIS)

Kaye, R.D.; Henriksen, K.; Jones, R.; Morisseau, D.S.; Serig, D.I.

1995-07-01

A series of human factors evaluations was undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. The principal sources of radiation are a radioactive isotope, typically cobalt60 (Co-60), or a linear accelerator device capable of producing very high energy x-ray and electron beams. A team of human factors specialists conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. In addition, a panel of radiation oncologists, medical physicists, and radiation technologists served as subject matter experts. A function and task analysis was initially performed to guide subsequent evaluations in the areas of user-system interfaces, procedures, training and qualifications, and organizational policies and practices. The present report focuses on an evaluation of the human-system interfaces in relation to the treatment machines and supporting equipment (e.g., simulators, treatment planning computers, control consoles, patient charts) found in the teletherapy environment. The report also evaluates operating, maintenance and emergency procedures and practices involved in teletherapy. The evaluations are based on the function and task analysis and established human engineering guidelines, where applicable

Human factors evaluation of teletherapy: Human-system interfaces and procedures. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Kaye, R.D.; Henriksen, K.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.I. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

1995-07-01

A series of human factors evaluations was undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. The principal sources of radiation are a radioactive isotope, typically cobalt60 (Co-60), or a linear accelerator device capable of producing very high energy x-ray and electron beams. A team of human factors specialists conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. In addition, a panel of radiation oncologists, medical physicists, and radiation technologists served as subject matter experts. A function and task analysis was initially performed to guide subsequent evaluations in the areas of user-system interfaces, procedures, training and qualifications, and organizational policies and practices. The present report focuses on an evaluation of the human-system interfaces in relation to the treatment machines and supporting equipment (e.g., simulators, treatment planning computers, control consoles, patient charts) found in the teletherapy environment. The report also evaluates operating, maintenance and emergency procedures and practices involved in teletherapy. The evaluations are based on the function and task analysis and established human engineering guidelines, where applicable.

Activities of IAEA related to human interface in man-machine system

International Nuclear Information System (INIS)

Nishiwaki, Yasushi

1988-01-01

The present paper outlines some activities of IAEA related to human interface in man-machine systems. It has been recognized for quite some time that in large and complex man-machine interactive systems human errors can contribute substantially to failures of these systems, and that the improvement in the human interface in man-machine systems is essential for the safety of the plant. Many important surveys have been made in some member countries. These studies and operational experience have shown that it is possible to substantially reduce this adverse impact of human errors in nuclear power plant operations by the application of human factors technology. This technology. This technology includes: (1) selection of people with the requisite skills and knowledge and providing them with job-relevant training, (2) maintenance of the necessary job qualifications for each person in the plant, (3) design of man-machine interfaces which are fully compatible with the capabilities and limitations of the people in the system, and (4) design of job operations, including written materials, to facilitate required quality of human performance. A review is made of education/training, operator support systems, human error data collection, analysis of safety significant events and future activities. (Nogami, K.)

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, Hidekazu; Yang, Ming; Zhang, Zhijian; Hashim, Muhammad [Harbin Engineering University, Harbin (China); Lind, Morten [Technical University of Denmark, Kongens Lyngby (Djibouti); Tamayama, Kiyoshi; Okusa, Kyoichi [Japan Atomic Energy Agency, Tsuruga (Japan)

2011-08-15

A new concept is first proposed of distributed human interface system to integrate both operation and maintenance of nuclear power plant. Then, a method of constructing human interface system is introduced by integrating the plant knowledge database system based on Multilevel Flow Model (MFM) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R and D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipment of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented target plant model before the concrete proposition of the hardware and software systems development to be used by both the staffs of operation and maintenance of NPP.

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu; Yang, Ming; Zhang, Zhijian; Hashim, Muhammad; Lind, Morten; Tamayama, Kiyoshi; Okusa, Kyoichi

2011-01-01

A new concept is first proposed of distributed human interface system to integrate both operation and maintenance of nuclear power plant. Then, a method of constructing human interface system is introduced by integrating the plant knowledge database system based on Multilevel Flow Model (MFM) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R and D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipment of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented target plant model before the concrete proposition of the hardware and software systems development to be used by both the staffs of operation and maintenance of NPP

Business Performer-Centered Design of User Interfaces

Science.gov (United States)

Sousa, Kênia; Vanderdonckt, Jean

Business Performer-Centered Design of User Interfaces is a new design methodology that adopts business process (BP) definition and a business performer perspective for managing the life cycle of user interfaces of enterprise systems. In this methodology, when the organization has a business process culture, the business processes of an organization are firstly defined according to a traditional methodology for this kind of artifact. These business processes are then transformed into a series of task models that represent the interactive parts of the business processes that will ultimately lead to interactive systems. When the organization has its enterprise systems, but not yet its business processes modeled, the user interfaces of the systems help derive tasks models, which are then used to derive the business processes. The double linking between a business process and a task model, and between a task model and a user interface model makes it possible to ensure traceability of the artifacts in multiple paths and enables a more active participation of business performers in analyzing the resulting user interfaces. In this paper, we outline how a human-perspective is used tied to a model-driven perspective.

Knowledge-based support for design and operational use of human-machine interfaces

International Nuclear Information System (INIS)

Johannsen, G.

1994-01-01

The possibilities for knowledge support of different human user classes, namely operators, operational engineers and designers of human-machine interfaces, are discussed. Several human-machine interface functionalities are briefly explained. The paper deals with such questions as which type of knowledge is needed for design and operation, how to represent it, where to get it from, how to process it, and how to consider and use it. The relationships between design and operational use are thereby emphasised. (author)

Physical interface dynamics alter how robotic exosuits augment human movement: implications for optimizing wearable assistive devices.

Science.gov (United States)

Yandell, Matthew B; Quinlivan, Brendan T; Popov, Dmitry; Walsh, Conor; Zelik, Karl E

2017-05-18

Wearable assistive devices have demonstrated the potential to improve mobility outcomes for individuals with disabilities, and to augment healthy human performance; however, these benefits depend on how effectively power is transmitted from the device to the human user. Quantifying and understanding this power transmission is challenging due to complex human-device interface dynamics that occur as biological tissues and physical interface materials deform and displace under load, absorbing and returning power. Here we introduce a new methodology for quickly estimating interface power dynamics during movement tasks using common motion capture and force measurements, and then apply this method to quantify how a soft robotic ankle exosuit interacts with and transfers power to the human body during walking. We partition exosuit end-effector power (i.e., power output from the device) into power that augments ankle plantarflexion (termed augmentation power) vs. power that goes into deformation and motion of interface materials and underlying soft tissues (termed interface power). We provide empirical evidence of how human-exosuit interfaces absorb and return energy, reshaping exosuit-to-human power flow and resulting in three key consequences: (i) During exosuit loading (as applied forces increased), about 55% of exosuit end-effector power was absorbed into the interfaces. (ii) However, during subsequent exosuit unloading (as applied forces decreased) most of the absorbed interface power was returned viscoelastically. Consequently, the majority (about 75%) of exosuit end-effector work over each stride contributed to augmenting ankle plantarflexion. (iii) Ankle augmentation power (and work) was delayed relative to exosuit end-effector power, due to these interface energy absorption and return dynamics. Our findings elucidate the complexities of human-exosuit interface dynamics during transmission of power from assistive devices to the human body, and provide insight into

Ecological Design of Cooperative Human-Machine Interfaces for Safety of Intelligent Transport Systems

Directory of Open Access Journals (Sweden)

Orekhov Aleksandr

2016-01-01

Full Text Available The paper describes research results in the domain of cooperative intelligent transport systems. The requirements for human-machine interface considering safety issue of for intelligent transport systems (ITSare analyzed. Profiling of the requirements to cooperative human-machine interface (CHMI for such systems including requirements to usability and safety is based on a set of standards for ITSs. An approach and design technique of cooperative human-machine interface for ITSs are suggested. The architecture of cloud-based CHMI for intelligent transport systems has been developed. The prototype of software system CHMI4ITSis described.

A meta-analysis of human-system interfaces in unmanned aerial vehicle (UAV) swarm management.

Science.gov (United States)

Hocraffer, Amy; Nam, Chang S

2017-01-01

A meta-analysis was conducted to systematically evaluate the current state of research on human-system interfaces for users controlling semi-autonomous swarms composed of groups of drones or unmanned aerial vehicles (UAVs). UAV swarms pose several human factors challenges, such as high cognitive demands, non-intuitive behavior, and serious consequences for errors. This article presents findings from a meta-analysis of 27 UAV swarm management papers focused on the human-system interface and human factors concerns, providing an overview of the advantages, challenges, and limitations of current UAV management interfaces, as well as information on how these interfaces are currently evaluated. In general allowing user and mission-specific customization to user interfaces and raising the swarm's level of autonomy to reduce operator cognitive workload are beneficial and improve situation awareness (SA). It is clear more research is needed in this rapidly evolving field. Copyright © 2016 Elsevier Ltd. All rights reserved.

Parametric Study on Ultimate Failure Criteria of Elbow Piping Components in Seismically Isolated NPP

Energy Technology Data Exchange (ETDEWEB)

Hahm, Dae Gi; Ki, Min Kyu [KAERI, Daejeon (Korea, Republic of); Jeon, Bub Gyu; Kim, Nam Sik [Pusan National University, Busan (Korea, Republic of)

2016-05-15

It is well known that the interface pipes between isolated and non-isolated structures will become the most critical in the seismically isolated NPPs. Therefore, seismic performance of such interface pipes should be evaluated comprehensively especially in terms of the seismic fragility capacity. To evaluate the seismic capacity of interface pipes in the isolated NPP, firstly, we should define the failure mode and failure criteria of critical pipe components. Hence, in this study, we performed the dynamic tests of elbow components which were installed in a seismically isolated NPP, and evaluated the ultimate failure mode and failure criteria by using the test results. To do this, we manufactured 25 critical elbow component specimens and performed cyclic loading tests under the internal pressure condition. The failure mode and failure criteria of a pipe component will be varied by the design parameters such as the internal pressure, pipe diameter, loading type, and loading amplitude. From the tests, we assessed the effects of the variation parameters onto the failure criteria. For the tests, we generated the seismic input protocol of relative displacement between the ends of elbow component. In this paper, elbow in piping system was defined as a fragile element and numerical model was updated by component test. Failure mode of piping component under seismic load was defined by the dynamic tests of ultimate pipe capacity. For the interface piping system, the seismic capacity should be carefully estimated since that the required displacement absorption capacity will be increased significantly by the adoption of the seismic isolation system. In this study, the dynamic tests were performed for the elbow components which were installed in an actual NPPs, and the ultimate failure mode and failure criteria were also evaluated by using the test results.

Towards Human-Centred Design

Science.gov (United States)

Bannon, Liam J.

The field of HCI has evolved and expanded dramatically since its origin in the early 1980’s. The HCI community embraces a large community of researchers and practitioners around the world, from a variety of disciplinary backgrounds in the human and social sciences, engineering and informatics, and more recently, the arts and design disciplines. This kaleidoscope of cultures and disciplines as seen at INTERACT Conferences provides a rich pool of resources for examining our field. Applications are increasingly exploring our full range of sensory modalities, and merging the digital and physical worlds. WiFi has opened up a huge design space for mobile applications. A focus on usability of products and services has been complemented by an emphasis on engagement, enjoyment and experience. With the advent of ubiquitous computing, and the emergence of “The Internet of Things”, new kinds of more open infrastructures make possible radically new kinds of applications. The sources of innovation have also broadened, to include human and social actors outside of the computing and design organizations. The question is to what extent is our mainstream thinking in the HCI field ready for the challenges of this Brave New World? Do the technological and social innovations that we see emerging require us to re-shape, or even, re-create, our field, or is it a case of a more gradual evolution and development of that which we already know? In this closing Keynote, I will provide a perspective on the evolution and development of the HCI field, looking backwards as well as forwards, in order to determine what are some of the changes of significance in the field. This “broad-brush” approach to what I term “ human-centred design” will be complemented by the examination of specific projects and applications, to help anchor some of the discussion. Areas such as user-centred design, participatory design, computer-supported cooperative work and learning, and interaction design, in

Study and application of human reliability analysis for digital human-system interface

International Nuclear Information System (INIS)

Jia Ming; Liu Yanzi; Zhang Jianbo

2014-01-01

The knowledge of human-orientated abilities and limitations could be used to digital human-system interface (HSI) design by human reliability analysis (HRA) technology. Further, control room system design could achieve the perfect match of man-machine-environment. This research was conducted to establish an integrated HRA method. This method identified HSI potential design flaws which may affect human performance and cause human error. Then a systematic approach was adopted to optimize HSI. It turns out that this method is practical and objective, and effectively improves the safety, reliability and economy of nuclear power plant. This method was applied to CRP1000 projects under construction successfully with great potential. (authors)

Applying human factors to the design of control centre and workstation of a nuclear reactor

Energy Technology Data Exchange (ETDEWEB)

Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R.; Goncalves, Gabriel de L., E-mail: luquetti@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Souza, Tamara D.M.F.; Falcao, Mariana A. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Dept. de Desenho Industrial

2013-07-01

Human factors is a body of scientific factors about human characteristics, covering biomedical, psychological and psychosocial considerations, including principles and applications in the personnel selection areas, training, job performance aid tools and human performance evaluation. Control Centre is a combination of control rooms, control suites and local control stations which are functionally related and all on the same site. Digital control room includes an arrangement of systems, equipment such as computers and communication terminals and workstations at which control and monitoring functions are conducted by operators. Inadequate integration between control room and operators reduces safety, increases the operation complexity, complicates operator training and increases the likelihood of human errors occurrence. The objective of this paper is to present a specific approach for the conceptual and basic design of the control centre and workstation of a nuclear reactor used to produce radioisotope. The approach is based on human factors standards, guidelines and the participation of a multidisciplinary team in the conceptual and basic phases of the design. Using the information gathered from standards and from the multidisciplinary team, an initial sketch 3D of the control centre and workstation are being developed. (author)

Applying human factors to the design of control centre and workstation of a nuclear reactor

International Nuclear Information System (INIS)

Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R.; Goncalves, Gabriel de L.; Souza, Tamara D.M.F.; Falcao, Mariana A.

2013-01-01

Human factors is a body of scientific factors about human characteristics, covering biomedical, psychological and psychosocial considerations, including principles and applications in the personnel selection areas, training, job performance aid tools and human performance evaluation. Control Centre is a combination of control rooms, control suites and local control stations which are functionally related and all on the same site. Digital control room includes an arrangement of systems, equipment such as computers and communication terminals and workstations at which control and monitoring functions are conducted by operators. Inadequate integration between control room and operators reduces safety, increases the operation complexity, complicates operator training and increases the likelihood of human errors occurrence. The objective of this paper is to present a specific approach for the conceptual and basic design of the control centre and workstation of a nuclear reactor used to produce radioisotope. The approach is based on human factors standards, guidelines and the participation of a multidisciplinary team in the conceptual and basic phases of the design. Using the information gathered from standards and from the multidisciplinary team, an initial sketch 3D of the control centre and workstation are being developed. (author)

Human-machine interface for a VR-based medical imaging environment

Science.gov (United States)

Krapichler, Christian; Haubner, Michael; Loesch, Andreas; Lang, Manfred K.; Englmeier, Karl-Hans

1997-05-01

Modern 3D scanning techniques like magnetic resonance imaging (MRI) or computed tomography (CT) produce high- quality images of the human anatomy. Virtual environments open new ways to display and to analyze those tomograms. Compared with today's inspection of 2D image sequences, physicians are empowered to recognize spatial coherencies and examine pathological regions more facile, diagnosis and therapy planning can be accelerated. For that purpose a powerful human-machine interface is required, which offers a variety of tools and features to enable both exploration and manipulation of the 3D data. Man-machine communication has to be intuitive and efficacious to avoid long accustoming times and to enhance familiarity with and acceptance of the interface. Hence, interaction capabilities in virtual worlds should be comparable to those in the real work to allow utilization of our natural experiences. In this paper the integration of hand gestures and visual focus, two important aspects in modern human-computer interaction, into a medical imaging environment is shown. With the presented human- machine interface, including virtual reality displaying and interaction techniques, radiologists can be supported in their work. Further, virtual environments can even alleviate communication between specialists from different fields or in educational and training applications.

EOG-sEMG Human Interface for Communication.

Science.gov (United States)

Tamura, Hiroki; Yan, Mingmin; Sakurai, Keiko; Tanno, Koichi

2016-01-01

The aim of this study is to present electrooculogram (EOG) and surface electromyogram (sEMG) signals that can be used as a human-computer interface. Establishing an efficient alternative channel for communication without overt speech and hand movements is important for increasing the quality of life for patients suffering from amyotrophic lateral sclerosis, muscular dystrophy, or other illnesses. In this paper, we propose an EOG-sEMG human-computer interface system for communication using both cross-channels and parallel lines channels on the face with the same electrodes. This system could record EOG and sEMG signals as "dual-modality" for pattern recognition simultaneously. Although as much as 4 patterns could be recognized, dealing with the state of the patients, we only choose two classes (left and right motion) of EOG and two classes (left blink and right blink) of sEMG which are easily to be realized for simulation and monitoring task. From the simulation results, our system achieved four-pattern classification with an accuracy of 95.1%.

Human-centred methods in the design of an e-health solution for patients undergoing weight loss treatment

DEFF Research Database (Denmark)

Das, Anita; Svanæs, Dag

2013-01-01

Background and objective Patients undergoing weight loss treatment require follow-up as part of the treatment process. E-health solutions may be used for this purpose. We have used an iterative design approach to develop a patient-centred e-health solution for patients undergoing weight loss...... in the design process. Our findings imply that involving stakeholders separately during specific human-centred activities is important in order to capture subtle, but critical aspects of the users’ requirements. Conclusion Applying human-centred methods in the design of e-health solutions requires...... that designers must take particular considerations when patients and healthcare professionals are involved in the design process. Keywords E-health; Participatory design; User-centred design; Obesity; Weight loss treatment...

Optimal design method for a digital human–computer interface based on human reliability in a nuclear power plant. Part 3: Optimization method for interface task layout

International Nuclear Information System (INIS)

Jiang, Jianjun; Wang, Yiqun; Zhang, Li; Xie, Tian; Li, Min; Peng, Yuyuan; Wu, Daqing; Li, Peiyao; Ma, Congmin; Shen, Mengxu; Wu, Xing; Weng, Mengyun; Wang, Shiwei; Xie, Cen

2016-01-01

Highlights: • The authors present an optimization algorithm for interface task layout. • The performing process of the proposed algorithm was depicted. • The performance evaluation method adopted neural network method. • The optimization layouts of an event interface tasks were obtained by experiments. - Abstract: This is the last in a series of papers describing the optimal design for a digital human–computer interface of a nuclear power plant (NPP) from three different points based on human reliability. The purpose of this series is to propose different optimization methods from varying perspectives to decrease human factor events that arise from the defects of a human–computer interface. The present paper mainly solves the optimization method as to how to effectively layout interface tasks into different screens. The purpose of this paper is to decrease human errors by reducing the distance that an operator moves among different screens in each operation. In order to resolve the problem, the authors propose an optimization process of interface task layout for digital human–computer interface of a NPP. As to how to automatically layout each interface task into one of screens in each operation, the paper presents a shortest moving path optimization algorithm with dynamic flag based on human reliability. To test the algorithm performance, the evaluation method uses neural network based on human reliability. The less the human error probabilities are, the better the interface task layouts among different screens are. Thus, by analyzing the performance of each interface task layout, the optimization result is obtained. Finally, the optimization layouts of spurious safety injection event interface tasks of the NPP are obtained by an experiment, the proposed methods has a good accuracy and stabilization.

NEOCE: a new external occulting coronagraph experiment for ultimate observations of the chromosphere, corona and interface

Science.gov (United States)

Damé, Luc; Fineschi, Silvano; Kuzin, Sergey; Von Fay-Siebenburgen, Erdélyi Robert

Several ground facilities and space missions are currently dedicated to the study of the Sun at high resolution and of the solar corona in particular. However, and despite significant progress with the advent of space missions and UV, EUV and XUV direct observations of the hot chromosphere and million-degrees coronal plasma, much is yet to be achieved in the understanding of these high temperatures, fine dynamic dissipative structures and of the coronal heating in general. Recent missions have shown the definite role of a wide range of waves and of the magnetic field deep in the inner corona, at the chromosphere-corona interface, where dramatic and physically fundamental changes occur. The dynamics of the chromosphere and corona is controlled and governed by the emerging magnetic field. Accordingly, the direct measurement of the chromospheric and coronal magnetic fields is of prime importance. The solar corona consists of many localised loop-like structures or threads with the plasmas brightening and fading independently. The plasma evolution in each thread is believed to be related to the formation of filaments, each one being dynamic, in a non-equilibrium state. The mechanism sustaining this dynamics, oscillations or waves (Alfvén or other magneto-plasma waves), requires both very high-cadence, multi-spectral observations, and high resolution and coronal magnetometry. This is foreseen in the future Space Mission NEOCE (New External Occulting Coronagraph Experiment), the ultimate new generation high-resolution coronagraphic heliospheric mission, to be proposed for ESA M4. NEOCE, an evolution of the HiRISE mission, is ideally placed at the L5 Lagrangian point (for a better follow-up of CMEs), and provides FUV imaging and spectro-imaging, EUV and XUV imaging and spectroscopy, and ultimate coronagraphy by a remote external occulter (two satellites in formation flying 375 m apart minimizing scattered light) allowing to characterize temperature, densities and

Behaviour of concrete nuclear containment structures upto ultimate failure with special reference to MAPP-1 containment

International Nuclear Information System (INIS)

Appa Rao, T.V.S.R.

1975-01-01

Theoretical and experimental methods for investigating the behaviour of concrete secondary containment structures subjected to loads upto their ultimate failure have been discussed in the paper. Need for inelastic nonlinear analysis of containments has been emphasized. Different contitutive models of concrete that can be employed in the nonlinear analysis of concrete structures were briefly reviewed. Based on the experimental results obtained in a 1:12 scale model test conducted at the Structural Engineering Research (Regional) Centre, Madras, behaviour of the MAPP-1 containment to internal pressure loading upto its ultimate failure has been discussed. (author)

Perspective of next generation training system from the viewpoints of human interfaces. Human interface kara mita kyoiku kunren system no genjo to kongo no tenbo

Energy Technology Data Exchange (ETDEWEB)

Nishida, S [Mitsubishi Electric Corp., Tokyo (Japan)

1992-12-10

This paper describes an education and training system placing its emphasis on human interfaces. The paper indicates that the currently used education and training systems lack training functions to cultivate knowledge-based judgment abilities that can find adequate solutions to events that have not been experienced previously; such judgments require deep understanding on the objects; and this training requires a system to aid the comprehension based on knowledges in the realm of recognition science for the 'human understanding'. Next, a pedagogical interface is proposed for aiding the comprehension. The paper enumerates functions indispensable for the comprehension including setting the 'loop for representation and examination', aiding the representation to examination loop, aiding roles by others, and realizing interactions through a hypothetical world. Also enumerated as fundamental techniques to structure such interface are information structuring techniques, groupware techniques, and virtual reality techniques. 19 refs., 10 figs.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA

Directory of Open Access Journals (Sweden)

Li Deng

2016-01-01

Full Text Available In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA.

Science.gov (United States)

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Some Human Factors Considerations for Designing Mixed Reality Interfaces

National Research Council Canada - National Science Library

Milgram, Paul

2006-01-01

...), as well as the case of Augmented Virtuality (AV). In designing human-machine interfaces for mixed reality applications, a number of considerations are discussed which may potentially impact the effectiveness of the design...

Guidance for Human-system Interfaces to Automatic Systems

Energy Technology Data Exchange (ETDEWEB)

O' Hara, J.M.; Higgins, J.; Stephen Fleger; Valerie Barnes

2010-09-27

Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions, including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: Levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration.

Telephone based speech interfaces in the developing world, from the perspective of human-human communication

CSIR Research Space (South Africa)

Naidoo, S

2005-07-01

Full Text Available recently, before computers systems were able to synthesize or recognize speech, speech was a capability unique to humans. The human brain has developed to differentiate between human speech and other audio occurrences. Therefore, the slowly- evolving... human brain reacts in certain ways to voice stimuli, and has certain expectations regarding communication by voice. Nass affirms that the human brain operates using the same mechanisms when interacting with speech interfaces as when conversing...

Coping with human errors through system design: Implications for ecological interface design

DEFF Research Database (Denmark)

Rasmussen, Jens; Vicente, Kim J.

1989-01-01

Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects...... of the adaptive mechanisms involved in learning. In terms of design implications, these findings suggest that reliable human-system interaction will be achieved by designing interfaces which tend to minimize the potential for control interference and support recovery from errors. In other words, the focus should...... be on control of the effects of errors rather than on the elimination of errors per se. In this paper, we propose a theoretical framework for interface design that attempts to satisfy these objectives. The goal of our framework, called ecological interface design, is to develop a meaningful representation...

Optimal design methods for a digital human-computer interface based on human reliability in a nuclear power plant

International Nuclear Information System (INIS)

Jiang, Jianjun; Zhang, Li; Xie, Tian; Wu, Daqing; Li, Min; Wang, Yiqun; Peng, Yuyuan; Peng, Jie; Zhang, Mengjia; Li, Peiyao; Ma, Congmin; Wu, Xing

2017-01-01

Highlights: • A complete optimization process is established for digital human-computer interfaces of Npps. • A quick convergence search method is proposed. • The authors propose an affinity error probability mapping function to test human reliability. - Abstract: This is the second in a series of papers describing the optimal design method for a digital human-computer interface of nuclear power plant (Npp) from three different points based on human reliability. The purpose of this series is to explore different optimization methods from varying perspectives. This present paper mainly discusses the optimal design method for quantity of components of the same factor. In monitoring process, quantity of components has brought heavy burden to operators, thus, human errors are easily triggered. To solve the problem, the authors propose an optimization process, a quick convergence search method and an affinity error probability mapping function. Two balanceable parameter values of the affinity error probability function are obtained by experiments. The experimental results show that the affinity error probability mapping function about human-computer interface has very good sensitivity and stability, and that quick convergence search method for fuzzy segments divided by component quantity has better performance than general algorithm.

Human Factors Interface with Systems Engineering for NASA Human Spaceflights

Science.gov (United States)

Wong, Douglas T.

2009-01-01

This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

Human-Machine interface for off normal and emergency situations in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-01-01

Many nuclear power plants (NPPs) have reported that a high percentage of all major failures in the plants are caused by human errors. Therefore, there has been much focus on elimination of human errors, enhancement of human performance, and general improvement of human machine interface (HMI). Both the utility management and the regulators are demanding improvement in this area. The International Atomic Energy Agency (IAEA) Specialists' Meeting on 'Human-Machine Interface for Off Normal and Emergency Situations in Nuclear Power Plants' was co-organized by the Korea Atomic Energy Research Institute (KAERI) and the Korea Power Engineering Company, INC (KOPEC), and took place in Taejeon, Republic of Korea, 1999 October 26-28. Fifty eight participants, representing nine member countries reviewed recent developments and discussed directions for future efforts in the Human-Machine Interface for Off Normal and Emergency Situations in NPPs. Twenty papers were presented, covering a wide spectrum of technical and scientific subjects including recent experience and benefits from Operational Experience with HMI, Development of HMI System, Licensing Issues for HMI and Future Development and Trends. (Author)

Human-Machine interface for off normal and emergency situations in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-01-01

Many nuclear power plants (NPPs) have reported that a high percentage of all major failures in the plants are caused by human errors. Therefore, there has been much focus on elimination of human errors, enhancement of human performance, and general improvement of human machine interface (HMI). Both the utility management and the regulators are demanding improvement in this area. The International Atomic Energy Agency (IAEA) Specialists' Meeting on 'Human-Machine Interface for Off Normal and Emergency Situations in Nuclear Power Plants' was co-organized by the Korea Atomic Energy Research Institute (KAERI) and the Korea Power Engineering Company, INC (KOPEC), and took place in Taejeon, Republic of Korea, 1999 October 26-28. Fifty eight participants, representing nine member countries reviewed recent developments and discussed directions for future efforts in the Human-Machine Interface for Off Normal and Emergency Situations in NPPs. Twenty papers were presented, covering a wide spectrum of technical and scientific subjects including recent experience and benefits from Operational Experience with HMI, Development of HMI System, Licensing Issues for HMI and Future Development and Trends. (Author)

Proposal of adaptive human interface and study of interface evaluation method for plant operators

International Nuclear Information System (INIS)

Ujita, Hiroshi; Kubota, Ryuji.

1994-01-01

In this report, a new concept of human interface adaptive to plant operators' mental model, cognitive process and psychological state which change with time is proposed. It is composed of a function to determine information which should be indicated to operators based on the plant situation, a function to estimate operators' internal conditions, and a function to arrange the information amount, position, timing, form etc. based on their conditions. The method to evaluate the fitness of the interface by using the analysis results based on cognitive science, ergonomics, psychology and physiology is developed to achieve such an interface. Fundamental physiological experiments have been performed. Stress and workload can be identified by the ratio of the power average of the α wave fraction of a brain wave and be distinguished by the ratio of the standard deviation of the R-R interval in test and at rest, in the case of low stress such as mouse operation, calculation and walking. (author)

Proposal of adaptive human interface and study of interface evaluation method for plant operators

Energy Technology Data Exchange (ETDEWEB)

Ujita, Hiroshi [Hitachi Ltd., Ibaraki (Japan). Energy Research Lab.; Kubota, Ryuji

1994-07-01

In this report, a new concept of human interface adaptive to plant operators' mental model, cognitive process and psychological state which change with time is proposed. It is composed of a function to determine information which should be indicated to operators based on the plant situation, a function to estimate operators' internal conditions, and a function to arrange the information amount, position, timing, form etc. based on their conditions. The method to evaluate the fitness of the interface by using the analysis results based on cognitive science, ergonomics, psychology and physiology is developed to achieve such an interface. Fundamental physiological experiments have been performed. Stress and workload can be identified by the ratio of the power average of the [alpha] wave fraction of a brain wave and be distinguished by the ratio of the standard deviation of the R-R interval in test and at rest, in the case of low stress such as mouse operation, calculation and walking. (author).

Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

DEFF Research Database (Denmark)

Hidekazu, Yoshikawa; Ming, Yang; Zhijian, Zhang

2011-01-01

interface systems to support the collaboration work between workers at local workplace and the main control room. In this paper, the general issues are reviewed on how to configure the whole human interface system for helping proactive trouble prevention and risk evaluation on the basis of the presented......) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R&D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium...... as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipments of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human...

Human-computer interfaces applied to numerical solution of the Plateau problem

Science.gov (United States)

Elias Fabris, Antonio; Soares Bandeira, Ivana; Ramos Batista, Valério

2015-09-01

In this work we present a code in Matlab to solve the Problem of Plateau numerically, and the code will include human-computer interface. The Problem of Plateau has applications in areas of knowledge like, for instance, Computer Graphics. The solution method will be the same one of the Surface Evolver, but the difference will be a complete graphical interface with the user. This will enable us to implement other kinds of interface like ocular mouse, voice, touch, etc. To date, Evolver does not include any graphical interface, which restricts its use by the scientific community. Specially, its use is practically impossible for most of the Physically Challenged People.

Human performance evaluation: The procedures of ultimate response guideline for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Liu, Kang-Hung, E-mail: alvinks@iner.gov.tw [Institute of Nuclear Energy Research, Atomic Engery Council, No. 1000, Whenhua Road, Jiaan Village, Longtan Township, Taoyuan County, Taiwan (China); Hwang, Sheue-Ling, E-mail: slhwang@ie.nthu.edu.tw [Department of Industrial Engineering and Engineering Management, National Tsing Hua University, No. 101, Section 2, Kuang-Fu Road, Hsinchu, Taiwan 30013, Taiwan (China)

2014-07-01

Highlights: • This study adopts SPAR-H to evaluate HEPs in the URG procedures. • The involvement of URG procedures could reduce CDF significantly. • Upgrading the training level of staff will enhance the reliability effectively. • Aiding the plant manager in making URG decision will enhance the reliability. - Abstract: In the nuclear accident which occurred in Japan on March 11, 2011, several units of Fukushima conventional BWR experienced a total loss of power and water supply triggered by a heavy earthquake and subsequent Tsunami which were outside design models. In the past, when an accident occurred, operators in nuclear power plants (NPP) followed emergency operating procedures (EOPs) or severe accident management guidance (SAMG). However, EOP and SAMG are symptom-based procedures to cope with severe transients and accidents, depending on real-time operational parameters. Ultimate response guidelines (URG), a plant specific interim remedy action plan, was developed to manage accidents caused by compound disasters which exceed design models. The URG guides the plant operators’ conduct of reactor depressurization, core cooling water injection, and containment venting. This study adopts NUREG/CR-6883 (Standardized Plant Analysis Risk Human Reliability Analysis, SPAR-H) to evaluate human error probabilities (HEPs) of action and diagnosis in the current URG procedures. We found the human reliability of URG procedures analyzed by SPAR-H is about 85% (depending on different decision makers). Upgrading the training level of staff or enhancing plant managers ability to decide whether to execute URG will enhance the human reliability of URG procedures.

Humans, Intelligent Technology, and Their Interface: A Study of Brown’s Point

Science.gov (United States)

2017-12-01

INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT by Jackie L. J. White December 2017 Thesis Advisor: Carolyn Halladay...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE HUMANS, INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT...with the technology before and during the accident. I combined the findings from the accident investigation with various heuristics regarding the human

Front panel human interface for FASTBUS

International Nuclear Information System (INIS)

Gustavson, D.B.; Holmes, T.L.; Paffrath, L.; Steffani, J.P.

1980-01-01

A human interface based on the Snoop diagnostic module has been designed to facilitate checkout of FASTBUS devices, diagnosis of system faults, and monitoring of system performance. This system, which is a generalization of the usual computer front panel or control console, includes logic analyzer functions, display and manual-control access to other modules, a microprocessor which allows the user to create and execute diagnostic programs and store them on a minifloppy disk, and a diagnostic network which allows remote console operation and coordination of information from multiple segments' Snoops

RTEMS CENTRE- Support and Maintenance CENTRE to RTEMS Operating System

Science.gov (United States)

Silva, H.; Constantino, A.; Coutunho, M.; Freitas, D.; Faustino, S.; Mota, M.; Colaço, P.; Zulianello, M.

2008-08-01

RTEMS stands for Real-Time Operating System for Multiprocessor Systems. It is a full featured Real Time Operating System that supports a variety of open APIs and interface standards. It provides a high performance environment for embedded applications, including a fixed-priority preemptive/non-preemptive scheduler, a comprehensive set of multitasking operations and a large range of supported architectures. Support and maintenance CENTRE to RTEMS operating system (RTEMS CENTRE) is a joint initiative of ESA-Portugal Task force, aiming to build a strong technical competence in the space flight (on- board) software, to offer support, maintenance and improvements to RTEMS. This paper provides a high level description of the current and future activities of the RTEMS CENTRE. It presents a brief description of the RTEMS operating system, a description of the tools developed and distributed to the community [1] and the improvements to be made to the operating system, including facilitation for the qualification of RTEMS (4.8.0) [2] for the space missions.

A Function-Behavior-State Approach to Designing Human Machine Interface for Nuclear Power Plant Operators

Science.gov (United States)

Lin, Y.; Zhang, W. J.

2005-02-01

This paper presents an approach to human-machine interface design for control room operators of nuclear power plants. The first step in designing an interface for a particular application is to determine information content that needs to be displayed. The design methodology for this step is called the interface design framework (called framework ). Several frameworks have been proposed for applications at varying levels, including process plants. However, none is based on the design and manufacture of a plant system for which the interface is designed. This paper presents an interface design framework which originates from design theory and methodology for general technical systems. Specifically, the framework is based on a set of core concepts of a function-behavior-state model originally proposed by the artificial intelligence research community and widely applied in the design research community. Benefits of this new framework include the provision of a model-based fault diagnosis facility, and the seamless integration of the design (manufacture, maintenance) of plants and the design of human-machine interfaces. The missing linkage between design and operation of a plant was one of the causes of the Three Mile Island nuclear reactor incident. A simulated plant system is presented to explain how to apply this framework in designing an interface. The resulting human-machine interface is discussed; specifically, several fault diagnosis examples are elaborated to demonstrate how this interface could support operators' fault diagnosis in an unanticipated situation.

The Emotiv EPOC interface paradigm in Human-Computer Interaction

OpenAIRE

Ancău Dorina; Roman Nicolae-Marius; Ancău Mircea

2017-01-01

Numerous studies have suggested the use of decoded error potentials in the brain to improve human-computer communication. Together with state-of-the-art scientific equipment, experiments have also tested instruments with more limited performance for the time being, such as Emotiv EPOC. This study presents a review of these trials and a summary of the results obtained. However, the level of these results indicates a promising prospect for using this headset as a human-computer interface for er...

Human Machine Interfaces for Teleoperators and Virtual Environments

Science.gov (United States)

Durlach, Nathaniel I. (Compiler); Sheridan, Thomas B. (Compiler); Ellis, Stephen R. (Compiler)

1991-01-01

In Mar. 1990, a meeting organized around the general theme of teleoperation research into virtual environment display technology was conducted. This is a collection of conference-related fragments that will give a glimpse of the potential of the following fields and how they interplay: sensorimotor performance; human-machine interfaces; teleoperation; virtual environments; performance measurement and evaluation methods; and design principles and predictive models.

Gaze-and-brain-controlled interfaces for human-computer and human-robot interaction

Directory of Open Access Journals (Sweden)

Shishkin S. L.

2017-09-01

Full Text Available Background. Human-machine interaction technology has greatly evolved during the last decades, but manual and speech modalities remain single output channels with their typical constraints imposed by the motor system’s information transfer limits. Will brain-computer interfaces (BCIs and gaze-based control be able to convey human commands or even intentions to machines in the near future? We provide an overview of basic approaches in this new area of applied cognitive research. Objective. We test the hypothesis that the use of communication paradigms and a combination of eye tracking with unobtrusive forms of registering brain activity can improve human-machine interaction. Methods and Results. Three groups of ongoing experiments at the Kurchatov Institute are reported. First, we discuss the communicative nature of human-robot interaction, and approaches to building a more e cient technology. Specifically, “communicative” patterns of interaction can be based on joint attention paradigms from developmental psychology, including a mutual “eye-to-eye” exchange of looks between human and robot. Further, we provide an example of “eye mouse” superiority over the computer mouse, here in emulating the task of selecting a moving robot from a swarm. Finally, we demonstrate a passive, noninvasive BCI that uses EEG correlates of expectation. This may become an important lter to separate intentional gaze dwells from non-intentional ones. Conclusion. The current noninvasive BCIs are not well suited for human-robot interaction, and their performance, when they are employed by healthy users, is critically dependent on the impact of the gaze on selection of spatial locations. The new approaches discussed show a high potential for creating alternative output pathways for the human brain. When support from passive BCIs becomes mature, the hybrid technology of the eye-brain-computer (EBCI interface will have a chance to enable natural, fluent, and the

Human factor engineering analysis for computerized human machine interface design issues

International Nuclear Information System (INIS)

Wang Zhifang; Gu Pengfei; Zhang Jianbo

2010-01-01

The application of digital I and C technology in nuclear power plants is a significant improvement in terms of functional performances and flexibility, and it also poses a challenge to operation safety. Most of the new NPPs under construction are adopting advanced control room design which utilizes the computerized human machine interface (HMI) as the main operating means. Thus, it greatly changes the way the operators interact with the plant. This paper introduces the main challenges brought out by computerized technology on the human factor engineering aspect and addresses the main issues to be dealt with in the computerized HMI design process. Based on a operator task-resources-cognitive model, it states that the root cause of human errors is the mismatch between resources demand and their supply. And a task-oriented HMI design principle is discussed. (authors)

A structural approach to constructing perspective efficient and reliable human-computer interfaces

International Nuclear Information System (INIS)

Balint, L.

1989-01-01

The principles of human-computer interface (HCI) realizations are investigated with the aim of getting closer to a general framework and thus, to a more or less solid background of constructing perspective efficient, reliable and cost-effective human-computer interfaces. On the basis of characterizing and classifying the different HCI solutions, the fundamental problems of interface construction are pointed out especially with respect to human error occurrence possibilities. The evolution of HCI realizations is illustrated by summarizing the main properties of past, present and foreseeable future interface generations. HCI modeling is pointed out to be a crucial problem in theoretical and practical investigations. Suggestions concerning HCI structure (hierarchy and modularity), HCI functional dynamics (mapping from input to output information), minimization of human error caused system failures (error-tolerance, error-recovery and error-correcting) as well as cost-effective HCI design and realization methodology (universal and application-oriented vs. application-specific solutions) are presented. The concept of RISC-based and SCAMP-type HCI components is introduced with the aim of having a reduced interaction scheme in communication and a well defined architecture in HCI components' internal structure. HCI efficiency and reliability are dealt with, by taking into account complexity and flexibility. The application of fast computerized prototyping is also briefly investigated as an experimental device of achieving simple, parametrized, invariant HCI models. Finally, a concise outline of an approach of how to construct ideal HCI's is also suggested by emphasizing the open questions and the need of future work related to the proposals, as well. (author). 14 refs, 6 figs

Client Centred Desing

DEFF Research Database (Denmark)

Ørngreen, Rikke; Nielsen, Janni; Levinsen, Karin

2008-01-01

In this paper we argue for the use of Client Centred preparation phases when designing complex systems. Through Client Centred Design human computer interaction can extend the focus on end-users to alse encompass the client's needs, context and resources....

Brain Computer Interface on Track to Home.

Science.gov (United States)

Miralles, Felip; Vargiu, Eloisa; Dauwalder, Stefan; Solà, Marc; Müller-Putz, Gernot; Wriessnegger, Selina C; Pinegger, Andreas; Kübler, Andrea; Halder, Sebastian; Käthner, Ivo; Martin, Suzanne; Daly, Jean; Armstrong, Elaine; Guger, Christoph; Hintermüller, Christoph; Lowish, Hannah

2015-01-01

The novel BackHome system offers individuals with disabilities a range of useful services available via brain-computer interfaces (BCIs), to help restore their independence. This is the time such technology is ready to be deployed in the real world, that is, at the target end users' home. This has been achieved by the development of practical electrodes, easy to use software, and delivering telemonitoring and home support capabilities which have been conceived, implemented, and tested within a user-centred design approach. The final BackHome system is the result of a 3-year long process involving extensive user engagement to maximize effectiveness, reliability, robustness, and ease of use of a home based BCI system. The system is comprised of ergonomic and hassle-free BCI equipment; one-click software services for Smart Home control, cognitive stimulation, and web browsing; and remote telemonitoring and home support tools to enable independent home use for nonexpert caregivers and users. BackHome aims to successfully bring BCIs to the home of people with limited mobility to restore their independence and ultimately improve their quality of life.

The Emotiv EPOC interface paradigm in Human-Computer Interaction

Directory of Open Access Journals (Sweden)

Ancău Dorina

2017-01-01

Full Text Available Numerous studies have suggested the use of decoded error potentials in the brain to improve human-computer communication. Together with state-of-the-art scientific equipment, experiments have also tested instruments with more limited performance for the time being, such as Emotiv EPOC. This study presents a review of these trials and a summary of the results obtained. However, the level of these results indicates a promising prospect for using this headset as a human-computer interface for error decoding.

Stalking the ultimate particle

CERN Multimedia

2003-01-01

If you missed the ARTE programme entitled "L'Ultime Particule" broadcast in February, you have another chance to catch it in CERN's Main Auditorium on 13 March. "L'Ultime Particule" is a documentary by the French director Michel Andrieu that seeks to explain particle physics through a contemplative quest for the research physicists of matter of today and yesteryear. Invariably kitted out in a red parka and a soft hat, the programme's investigator scours the planet and the archives in search of the research physicists who are stalking the ultimate particle, the Higgs boson, in their quest to understand the structure of matter. Naturally enough, CERN is an important stage of his journey where Michel Andrieu and his team spent several days last year. Both from the physics and metaphysical points of view, "L'Ultime Particule" is worth seeing. The film's director, Michel Andrieu, will introduce his documentary and answer questions from the audience after the documentary has been shown. L'Ultime Particule by Mic...

The dispositions of things: the non-human dimension of power and ethics in patient-centred medicine.

Science.gov (United States)

Gardner, John; Cribb, Alan

2016-09-01

This article explores power relations between clinicians, patients and families as clinicians engage in patient-centred ethical work. Specifically, we draw on actor-network theory to interrogate the role of non-human elements in distributing power relations in clinical settings, as clinicians attempt to manage the expectations of patients and families. Using the activities of a multidisciplinary team providing deep brain stimulation to children with severe movement disorders as an example, we illustrate how a patient-centred tool is implicated in establishing relations that constitute four modes of power: 'power over', 'power to', "power storage" and "power/discretion". We argue that understanding the role of non-human elements in structuring power relations can guide and inform bioethical discussions on the suitability of patient-centred approaches in clinical settings. © 2016 The Authors. Sociology of Health & Illness published by John Wiley & Sons Ltd on behalf of Foundation for SHIL.

BBMRI-ERIC as a resource for pharmaceutical and life science industries: the development of biobank-based Expert Centres.

Science.gov (United States)

van Ommen, Gert-Jan B; Törnwall, Outi; Bréchot, Christian; Dagher, Georges; Galli, Joakim; Hveem, Kristian; Landegren, Ulf; Luchinat, Claudio; Metspalu, Andres; Nilsson, Cecilia; Solesvik, Ove V; Perola, Markus; Litton, Jan-Eric; Zatloukal, Kurt

2015-07-01

Biological resources (cells, tissues, bodily fluids or biomolecules) are considered essential raw material for the advancement of health-related biotechnology, for research and development in life sciences, and for ultimately improving human health. Stored in local biobanks, access to the human biological samples and related medical data for transnational research is often limited, in particular for the international life science industry. The recently established pan-European Biobanking and BioMolecular resources Research Infrastructure-European Research Infrastructure Consortium (BBMRI-ERIC) aims to improve accessibility and interoperability between academic and industrial parties to benefit personalized medicine, disease prevention to promote development of new diagnostics, devices and medicines. BBMRI-ERIC is developing the concept of Expert Centre as public-private partnerships in the precompetitive, not-for-profit field to provide a new structure to perform research projects that would face difficulties under currently established models of academic-industry collaboration. By definition, Expert Centres are key intermediaries between public and private sectors performing the analysis of biological samples under internationally standardized conditions. This paper presents the rationale behind the Expert Centres and illustrates the novel concept with model examples.

NATURAL USER INTERFACE SENSORS FOR HUMAN BODY MEASUREMENT

Directory of Open Access Journals (Sweden)

J. Boehm

2012-08-01

Full Text Available The recent push for natural user interfaces (NUI in the entertainment and gaming industry has ushered in a new era of low cost three-dimensional sensors. While the basic idea of using a three-dimensional sensor for human gesture recognition dates some years back it is not until recently that such sensors became available on the mass market. The current market leader is PrimeSense who provide their technology for the Microsoft Xbox Kinect. Since these sensors are developed to detect and observe human users they should be ideally suited to measure the human body. We describe the technology of a line of NUI sensors and assess their performance in terms of repeatability and accuracy. We demonstrate the implementation of a prototype scanner integrating several NUI sensors to achieve full body coverage. We present the results of the obtained surface model of a human body.

Natural User Interface Sensors for Human Body Measurement

Science.gov (United States)

Boehm, J.

2012-08-01

The recent push for natural user interfaces (NUI) in the entertainment and gaming industry has ushered in a new era of low cost three-dimensional sensors. While the basic idea of using a three-dimensional sensor for human gesture recognition dates some years back it is not until recently that such sensors became available on the mass market. The current market leader is PrimeSense who provide their technology for the Microsoft Xbox Kinect. Since these sensors are developed to detect and observe human users they should be ideally suited to measure the human body. We describe the technology of a line of NUI sensors and assess their performance in terms of repeatability and accuracy. We demonstrate the implementation of a prototype scanner integrating several NUI sensors to achieve full body coverage. We present the results of the obtained surface model of a human body.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA

OpenAIRE

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive cha...

Design of Human – Machine Interface and Altering of Pelvic Obliquity with RGR Trainer

OpenAIRE

Pietrusinski, Maciej; Unluhisarcikli, Ozer; Mavroidis, Constantinos; Cajigas, Iahn; Bonato, Paolo

2011-01-01

The Robotic Gait Rehabilitation (RGR) Trainer targets secondary gait deviations in stroke survivors undergoing rehabilitation. Using an impedance control strategy and a linear electromagnetic actuator, the device generates a force field to control pelvic obliquity through a Human-Machine Interface (i.e. a lower body exoskeleton). Herein we describe the design of the RGR Trainer Human-Machine Interface (HMI) and we demonstrate the system’s ability to alter the pattern of movement of the pelvis...

Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

The strength of polyaxial locking interfaces of distal radius plates.

Science.gov (United States)

Hoffmeier, Konrad L; Hofmann, Gunther O; Mückley, Thomas

2009-10-01

Currently available polyaxial locking plates represent the consequent enhancement of fixed-angle, first-generation locking plates. In contrast to fixed-angle locking plates which are sufficiently investigated, the strength of the new polyaxial locking options has not yet been evaluated biomechanically. This study investigates the mechanical strength of single polyaxial interfaces of different volar radius plates. Single screw-plate interfaces of the implants Palmar 2.7 (Königsee Implantate und Instrumente zur Osteosynthese GmbH, Allendorf, Germany), VariAx (Stryker Leibinger GmbH & Co. KG, Freiburg, Germany) und Viper (Integra LifeSciences Corporation, Plainsboro, NJ, USA) were tested by cantilever bending. The strength of 0 degrees, 10 degrees and 20 degrees screw locking angle was obtained during static and dynamic loading. The Palmar 2.7 interfaces showed greater ultimate strength and fatigue strength than the interfaces of the other implants. The strength of the VariAx interfaces was about 60% of Palmar 2.7 in both, static and dynamic loading. No dynamic testing was applied to the Viper plate because of its low ultimate strength. By static loading, an increase in screw locking angle caused a reduction of strength for the Palmar 2.7 and Viper locking interfaces. No influence was observed for the VariAx locking interfaces. During dynamic loading; angulation had no influence on the locking strength of Palmar 2.7. However, reduction of locking strength with increasing screw angulation was observed for VariAx. The strength of the polyaxial locking interfaces differs remarkably between the examined implants. Depending on the implant an increase of the screw locking angle causes a reduction of ultimate or fatigue strength, but not in all cases a significant impact was observed.

Brain barriers and functional interfaces with sequential appearance of ABC efflux transporters during human development

DEFF Research Database (Denmark)

Møllgård, Kjeld; Dziegielewska, Katarzyna M.; Holst, Camilla B.

2017-01-01

Adult brain is protected from entry of drugs and toxins by specific mechanisms such as ABC (ATP-binding Cassette) efflux transporters. Little is known when these appear in human brain during development. Cellular distribution of three main ABC transporters (ABCC1, ABCG2, ABCB1) was determined...... at blood-brain barriers and interfaces in human embryos and fetuses in first half of gestation. Antibodies against claudin-5 and-11 and antibodies to α-fetoprotein were used to describe morphological and functional aspects of brain barriers. First exchange interfaces to be established, probably at 4...... three transporters. Results provide evidence for sequential establishment of brain exchange interfaces and spatial and temporal timetable for three main ABC transporters in early human brain....

Study of manganese binding to the ferroxidase centre of human H-type ferritin.

Science.gov (United States)

Ardini, Matteo; Howes, Barry D; Fiorillo, Annarita; Falvo, Elisabetta; Sottini, Silvia; Rovai, Donella; Lantieri, Marco; Ilari, Andrea; Gatteschi, Dante; Spina, Gabriele; Chiancone, Emilia; Stefanini, Simonetta; Fittipaldi, Maria

2018-05-01

Ferritins are ubiquitous and conserved proteins endowed with enzymatic ferroxidase activity, that oxidize Fe(II) ions at the dimetal ferroxidase centre to form a mineralized Fe(III) oxide core deposited within the apo-protein shell. Herein, the in vitro formation of a heterodimetal cofactor constituted by Fe and Mn ions has been investigated in human H ferritin (hHFt). Namely, Mn and Fe binding at the hHFt ferroxidase centre and its effects on Fe(II) oxidation have been investigated by UV-Vis ferroxidation kinetics, fluorimetric titrations, multifrequency EPR, and preliminary Mössbauer spectroscopy. Our results show that in hHFt, both Fe(II) and Mn(II) bind the ferroxidase centre forming a Fe-Mn cofactor. Moreover, molecular oxygen seems to favour Mn(II) binding and increases the ferroxidation activity of the Mn-loaded protein. The data suggest that Mn influences the Fe binding and the efficiency of the ferroxidation reaction. The higher efficiency of the Mn-Fe heterometallic centre may have a physiological relevance in specific cell types (i.e. glia cells), where the concentration of Mn is the same order of magnitude as iron. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluation of human factors in interface design in main control rooms

International Nuclear Information System (INIS)

Hwang, S.-L.; Liang, S.-F.M.; Liu, T.-Y.Y.; Yang, Y.-J.; Chen, P.-Y.; Chuang, C.-F.

2009-01-01

An evaluation of human factors in a new nuclear power plant was conducted prior to the beginning of any business operations. After the task analysis and observation of training, two stages of interviews were carried out with the operators in the Fourth Nuclear Power Plant (NPP4). The main concerns identified were problems resulting from the operating interface of the display and controls in the main control room, usability of procedures, and the layout of the main control room. The latent human errors and suggestions were listed, and the top three problems were analyzed. The operators indicated that the alarm design issues and the critical problem of the operating mode with the VDU were worth further study in order to provide suggestions for a new interface design for future power plants.

Visualization tool for human-machine interface designers

Science.gov (United States)

Prevost, Michael P.; Banda, Carolyn P.

1991-06-01

As modern human-machine systems continue to grow in capabilities and complexity, system operators are faced with integrating and managing increased quantities of information. Since many information components are highly related to each other, optimizing the spatial and temporal aspects of presenting information to the operator has become a formidable task for the human-machine interface (HMI) designer. The authors describe a tool in an early stage of development, the Information Source Layout Editor (ISLE). This tool is to be used for information presentation design and analysis; it uses human factors guidelines to assist the HMI designer in the spatial layout of the information required by machine operators to perform their tasks effectively. These human factors guidelines address such areas as the functional and physical relatedness of information sources. By representing these relationships with metaphors such as spring tension, attractors, and repellers, the tool can help designers visualize the complex constraint space and interacting effects of moving displays to various alternate locations. The tool contains techniques for visualizing the relative 'goodness' of a configuration, as well as mechanisms such as optimization vectors to provide guidance toward a more optimal design. Also available is a rule-based design checker to determine compliance with selected human factors guidelines.

Human factors with nonhumans - Factors that affect computer-task performance

Science.gov (United States)

Washburn, David A.

1992-01-01

There are two general strategies that may be employed for 'doing human factors research with nonhuman animals'. First, one may use the methods of traditional human factors investigations to examine the nonhuman animal-to-machine interface. Alternatively, one might use performance by nonhuman animals as a surrogate for or model of performance by a human operator. Each of these approaches is illustrated with data in the present review. Chronic ambient noise was found to have a significant but inconsequential effect on computer-task performance by rhesus monkeys (Macaca mulatta). Additional data supported the generality of findings such as these to humans, showing that rhesus monkeys are appropriate models of human psychomotor performance. It is argued that ultimately the interface between comparative psychology and technology will depend on the coordinated use of both strategies of investigation.

User Interface History

DEFF Research Database (Denmark)

Jørgensen, Anker Helms; Myers, Brad A

2008-01-01

User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface e...

Quantitative evaluation of impedance perception characteristics of humans in the man-machine interface

International Nuclear Information System (INIS)

Onish, Keiichi; Kim, Young Woo; Obinata, Goro; Hase, Kazunori

2013-01-01

We investigated impedance perception characteristics of humans in the man-machine interface. Sensibility or operational feel about physical properties of machine dynamics is obtained through perception process. We evaluated the impedance perception characteristics of humans who are operating a mechanical system, based on extended Scheffe's subjective evaluation method in full consideration of the influence of impedance level, impedance difference, experiment order, individual difference and so on. Constant method based quantitative evaluation was adopted to investigate the influence of motion frequency and change of the impedance on human impedance perception characteristics. Experimental results indicate that humans perceive impedance of mechanical systems based on comparison process of the dynamical characteristics of the systems. The proposed method can be applied to quantify the design requirement of man-machine interface. The effectiveness of the proposed method is verified through experimental results.

Quantitative evaluation of impedance perception characteristics of humans in the man-machine interface

Energy Technology Data Exchange (ETDEWEB)

Onish, Keiichi [Yamaha Motor Co., Shizuoka (Japan); Kim, Young Woo [Daegu Techno Park R and D Center, Seoul (Korea, Republic of); Obinata, Goro [Nagoya University, Nagoya (Japan); Hase, Kazunori [Tokyo Metropolitan University, Tokyo (Japan)

2013-05-15

We investigated impedance perception characteristics of humans in the man-machine interface. Sensibility or operational feel about physical properties of machine dynamics is obtained through perception process. We evaluated the impedance perception characteristics of humans who are operating a mechanical system, based on extended Scheffe's subjective evaluation method in full consideration of the influence of impedance level, impedance difference, experiment order, individual difference and so on. Constant method based quantitative evaluation was adopted to investigate the influence of motion frequency and change of the impedance on human impedance perception characteristics. Experimental results indicate that humans perceive impedance of mechanical systems based on comparison process of the dynamical characteristics of the systems. The proposed method can be applied to quantify the design requirement of man-machine interface. The effectiveness of the proposed method is verified through experimental results.

All printed touchless human-machine interface based on only five functional materials

Science.gov (United States)

Scheipl, G.; Zirkl, M.; Sawatdee, A.; Helbig, U.; Krause, M.; Kraker, E.; Andersson Ersman, P.; Nilsson, D.; Platt, D.; Bodö, P.; Bauer, S.; Domann, G.; Mogessie, A.; Hartmann, Paul; Stadlober, B.

2012-02-01

We demonstrate the printing of a complex smart integrated system using only five functional inks: the fluoropolymer P(VDF:TrFE) (Poly(vinylidene fluoride trifluoroethylene) sensor ink, the conductive polymer PEDOT:PSS (poly(3,4 ethylenedioxythiophene):poly(styrene sulfonic acid) ink, a conductive carbon paste, a polymeric electrolyte and SU8 for separation. The result is a touchless human-machine interface, including piezo- and pyroelectric sensor pixels (sensitive to pressure changes and impinging infrared light), transistors for impedance matching and signal conditioning, and an electrochromic display. Applications may not only emerge in human-machine interfaces, but also in transient temperature or pressure sensing used in safety technology, in artificial skins and in disposable sensor labels.

A Human-Centred Tangible approach to learning Computational Thinking

Directory of Open Access Journals (Sweden)

Tommaso Turchi

2016-08-01

Full Text Available Computational Thinking has recently become a focus of many teaching and research domains; it encapsulates those thinking skills integral to solving complex problems using a computer, thus being widely applicable in our society. It is influencing research across many disciplines and also coming into the limelight of education, mostly thanks to public initiatives such as the Hour of Code. In this paper we present our arguments for promoting Computational Thinking in education through the Human-centred paradigm of Tangible End-User Development, namely by exploiting objects whose interactions with the physical environment are mapped to digital actions performed on the system.

Human-computer interface glove using flexible piezoelectric sensors

Science.gov (United States)

Cha, Youngsu; Seo, Jeonggyu; Kim, Jun-Sik; Park, Jung-Min

2017-05-01

In this note, we propose a human-computer interface glove based on flexible piezoelectric sensors. We select polyvinylidene fluoride as the piezoelectric material for the sensors because of advantages such as a steady piezoelectric characteristic and good flexibility. The sensors are installed in a fabric glove by means of pockets and Velcro bands. We detect changes in the angles of the finger joints from the outputs of the sensors, and use them for controlling a virtual hand that is utilized in virtual object manipulation. To assess the sensing ability of the piezoelectric sensors, we compare the processed angles from the sensor outputs with the real angles from a camera recoding. With good agreement between the processed and real angles, we successfully demonstrate the user interaction system with the virtual hand and interface glove based on the flexible piezoelectric sensors, for four hand motions: fist clenching, pinching, touching, and grasping.

Experimental evaluation of multimodal human computer interface for tactical audio applications

NARCIS (Netherlands)

Obrenovic, Z.; Starcevic, D.; Jovanov, E.; Oy, S.

2002-01-01

Mission critical and information overwhelming applications require careful design of the human computer interface. Typical applications include night vision or low visibility mission navigation, guidance through a hostile territory, and flight navigation and orientation. Additional channels of

Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

International Nuclear Information System (INIS)

O'Hara, J.M.; Higgins, J.C.

2010-01-01

Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

A long term model of circulation. [human body

Science.gov (United States)

White, R. J.

1974-01-01

A quantitative approach to modeling human physiological function, with a view toward ultimate application to long duration space flight experiments, was undertaken. Data was obtained on the effect of weightlessness on certain aspects of human physiological function during 1-3 month periods. Modifications in the Guyton model are reviewed. Design considerations for bilateral interface models are discussed. Construction of a functioning whole body model was studied, as well as the testing of the model versus available data.

The DIY Digital Medical Centre.

Science.gov (United States)

Timmis, James Kenneth; Timmis, Kenneth

2017-09-01

Healthcare systems worldwide are confronted with major economic, organizational and logistical challenges. Historic evolution of health care has led to significant healthcare sector fragmentation, resulting in systemic inefficiencies and suboptimal resource exploitation. To attain a sustainable healthcare model, fundamental, system-wide improvements that effectively network, and ensure fulfilment of potential synergies between sectors, and include and facilitate coherent strategic planning and organisation of healthcare infrastructure are needed. Critically, they must be specifically designed to sustainably achieve peak performance within the current policy environment for cost-control, and efficiency and quality improvement for service delivery. We propose creation of a new healthcare cluster, to be embedded in existing healthcare systems. It consists of (i) local 24/7 walk-in virtually autonomous do-it-yourself Digital Medical Centres performing routine diagnosis, monitoring, prevention, treatment and standardized documentation and health outcome assessment/reporting, which are online interfaced with (ii) regional 24/7 eClinician Centres providing on-demand clinical supervision/assistance to Digital Medical Centre patients. Both of these are, in turn, online interfaced with (iii) the National Clinical Informatics Centre, which houses the national patient data centre (cloud) and data analysis units that conduct patient- and population-level, personalized and predictive(-medicine) intervention optimization analyses. The National Clinical Informatics Centre also interfaces with biomedical research and prioritizes and accelerates the translation of new discoveries into clinical practice. The associated Health Policy Innovation and Evaluation Centre rapidly integrates new findings with health policy/regulatory discussions. This new cluster would synergistically link all health system components in a circular format, enable not only access by all arms of the health

Intelligent Human Machine Interface Design for Advanced Product Life Cycle Management Systems

OpenAIRE

Ahmed, Zeeshan

2010-01-01

Designing and implementing an intelligent and user friendly human machine interface for any kind of software or hardware oriented application is always be a challenging task for the designers and developers because it is very difficult to understand the psychology of the user, nature of the work and best suit of the environment. This research paper is basically about to propose an intelligent, flexible and user friendly machine interface for Product Life Cycle Management products or PDM Syste...

The use of graphics in the design of the human-telerobot interface

Science.gov (United States)

Stuart, Mark A.; Smith, Randy L.

1989-01-01

The Man-Systems Telerobotics Laboratory (MSTL) of NASA's Johnson Space Center employs computer graphics tools in their design and evaluation of the Flight Telerobotic Servicer (FTS) human/telerobot interface on the Shuttle and on the Space Station. It has been determined by the MSTL that the use of computer graphics can promote more expedient and less costly design endeavors. Several specific examples of computer graphics applied to the FTS user interface by the MSTL are described.

Flux scaling: Ultimate regime

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Flux scaling: Ultimate regime. With the Nusselt number and the mixing length scales, we get the Nusselt number and Reynolds number (w'd/ν) scalings: and or. and. scaling expected to occur at extremely high Ra Rayleigh-Benard convection. Get the ultimate regime ...

Ergonomic Models of Anthropometry, Human Biomechanics and Operator-Equipment Interfaces

Science.gov (United States)

Kroemer, Karl H. E. (Editor); Snook, Stover H. (Editor); Meadows, Susan K. (Editor); Deutsch, Stanley (Editor)

1988-01-01

The Committee on Human Factors was established in October 1980 by the Commission on Behavioral and Social Sciences and Education of the National Research Council. The committee is sponsored by the Office of Naval Research, the Air Force Office of Scientific Research, the Army Research Institute for the Behavioral and Social Sciences, the National Aeronautics and Space Administration, and the National Science Foundation. The workshop discussed the following: anthropometric models; biomechanical models; human-machine interface models; and research recommendations. A 17-page bibliography is included.

Brain Computer Interface on Track to Home

Directory of Open Access Journals (Sweden)

Felip Miralles

2015-01-01

Full Text Available The novel BackHome system offers individuals with disabilities a range of useful services available via brain-computer interfaces (BCIs, to help restore their independence. This is the time such technology is ready to be deployed in the real world, that is, at the target end users’ home. This has been achieved by the development of practical electrodes, easy to use software, and delivering telemonitoring and home support capabilities which have been conceived, implemented, and tested within a user-centred design approach. The final BackHome system is the result of a 3-year long process involving extensive user engagement to maximize effectiveness, reliability, robustness, and ease of use of a home based BCI system. The system is comprised of ergonomic and hassle-free BCI equipment; one-click software services for Smart Home control, cognitive stimulation, and web browsing; and remote telemonitoring and home support tools to enable independent home use for nonexpert caregivers and users. BackHome aims to successfully bring BCIs to the home of people with limited mobility to restore their independence and ultimately improve their quality of life.

Interactive displays natural human-interface technologies

CERN Document Server

Bhowmik, Achintya K

2014-01-01

One of the first books to provide an in-depth discussion of the technologies, applications and trends in the rapidly emerging field of interactive displays (touch, gesture & voice) The book will cover the technologies, applications and trends in the field of interactive displays, namely interfaces based on touch, gesture and voice and those using a combination of these technologies. The book will be split into 4 main parts with each being dedicated to a specific user interface. Part 1 ''Touch Interfaces'' will provide a review of the currently deployed touch-screen technologies and applications. It will also cover the recent developments towards achieving thinner, lightweight and cost-reduced touch screen panels in the future via integration of touch functionalities. Part 2 ''Gesture Interfaces'' will examine techniques and applications in stereoscopic 3D computer vision, structured-light 3D computer vision and time-of-flight 3D computer vision in gesture interfaces. Part 3 ''Voice Interfaces'' will revie...

Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

Energy Technology Data Exchange (ETDEWEB)

OHara, J.M.; Higgins, J.C.

2010-01-31

Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

Availability and Quantity of Human and Material Resources of Nigerian Universities' HIV Youth Friendly Centres: Implication for Policy Implementation

Directory of Open Access Journals (Sweden)

A.G. Akintomide

2017-12-01

Full Text Available The study assessed the availability and quality of human and material resources at the Campus-based Youth Friendly Centres in Southwestern Nigeria. The survey research design was adopted and the study was carried out among ten counsellors and centre coordinators of Youth Friendly Centres in four higher institutions of learning in Southwest Nigeria using interview guide and observation checklist to collect data. The result revealed that there were no enough counsellors at the YFCs and some of the counsellors available at the centres did not have enough qualification to render HIV counselling. It was also revealed that material resources were moderately available at most of the centres but not up to the require standard stipulated by the World Health Organization.

Multi-technology control centre to integrate 460 MW renewables

International Nuclear Information System (INIS)

2016-01-01

The new RWE Innogy Aersa Control Centre that has been certified to act as an interface with CECRE (the Renewable Energy Control Centre) since February 2015, connects RWE’s 20 renewable energy facilities with REE, the Spanish Electricity Grid. As a result, it ensures that wind farms, in addition to hydropower and solar plants, can inject the energy generated by its 460 MW installed safely and with no penalties. Green Eagle Solutions, a provider of software solutions for renewable energy companies, has collaborated with RWE in the development of this Control Centre, meeting the high standards of quality and safety required by RWE. This centre uses CompactSCADA® technology to integrate power generation facilities that need to be integrated in a Control Centre to communicate with REE’s CECRE. (Author)

Biotic and abiotic effects of human settlements in the wildland-urban interface

Science.gov (United States)

Avi Bar-Massada; Volker C. Radeloff; Susan I. Stewart

2014-01-01

The wildland-urban interface (WUI) is the area in which human settlements adjoin or intermix with ecosystems. Although research on the WUI has been focused on wildfire risk to settlements, we argue here that there is a need to quantify the extent of areas in which human settlements interact with adjoining ecosystems, regardless of their ability to support fire spread....

ZIO: The Ultimate Linux I/O Framework

CERN Document Server

Gonzalez Cobas, J D; Rubini, A; Nellaga, S; Vaga, F

2014-01-01

ZIO (with Z standing for “The Ultimate I/O” Framework) was developed for CERN with the specific needs of physics labs in mind, which are poorly addressed in the mainstream Linux kernel. ZIO provides a framework for industrial, high-bandwith, high-channel count I/O device drivers (digitizers, function generators, timing devices like TDCs) with performance, generality and scalability as design goals. Among its features, it offers abstractions for • both input and output channels, and channel sets • run-time selection of trigger types • run-time selection of buffer types • sysfs-based configuration • char devices for data and metadata • a socket interface (PF ZIO) as alternative to char devices In this paper, we discuss the design and implementation of ZIO, and describe representative cases of driver development for typical and exotic applications: drivers for the FMC (FPGAMezzanine Card, see [1]) boards developed at CERN like the FMC ADC 100Msps digitizer, FMC TDC timestamp counter, and FMC DEL ...

Centre-surround organization of fast sensorimotor integration in human motor hand area

DEFF Research Database (Denmark)

Dubbioso, Raffaele; Raffin, Estelle; Karabanov, Anke

2017-01-01

Using the short-latency afferent inhibition (SAI) paradigm, transcranial magnetic stimulation (TMS) of the primary motor hand area (M1HAND) can probe how sensory input from limbs modulates corticomotor output in humans. Here we applied a novel TMS mapping approach to chart the spatial representat......Using the short-latency afferent inhibition (SAI) paradigm, transcranial magnetic stimulation (TMS) of the primary motor hand area (M1HAND) can probe how sensory input from limbs modulates corticomotor output in humans. Here we applied a novel TMS mapping approach to chart the spatial...... in M1HAND. Like homotopic SAI, heterotopic SAF was somatotopically expressed in M1HAND. Together, the results provide first-time evidence that fast sensorimotor integration involves centre-inhibition and surround-facilitation in human M1HAND....

Investigation and evaluation into the usability of human-computer interfaces using a typical CAD system

Energy Technology Data Exchange (ETDEWEB)

Rickett, J D

1987-01-01

This research program covers three topics relating to the human-computer interface namely, voice recognition, tools and techniques for evaluation, and user and interface modeling. An investigation into the implementation of voice-recognition technologies examines how voice recognizers may be evaluated in commercial software. A prototype system was developed with the collaboration of FEMVIEW Ltd. (marketing a CAD package). A theoretical approach to evaluation leads to the hypothesis that human-computer interaction is affected by personality, influencing types of dialogue, preferred methods for providing helps, etc. A user model based on personality traits, or habitual-behavior patterns (HBP) is presented. Finally, a practical framework is provided for the evaluation of human-computer interfaces. It suggests that evaluation is an integral part of design and that the iterative use of evaluation techniques throughout the conceptualization, design, implementation and post-implementation stages will ensure systems that satisfy the needs of the users and fulfill the goal of usability.

Treatment of human-computer interface in a decision support system

International Nuclear Information System (INIS)

Heger, A.S.; Duran, F.A.; Cox, R.G.

1992-01-01

One of the most challenging applications facing the computer community is development of effective adaptive human-computer interface. This challenge stems from the complex nature of the human part of this symbiosis. The application of this discipline to the environmental restoration and waste management is further complicated due to the nature of environmental data. The information that is required to manage environmental impacts of human activity is fundamentally complex. This paper will discuss the efforts at Sandia National Laboratories in developing the adaptive conceptual model manager within the constraint of the environmental decision-making. A computer workstation, that hosts the Conceptual Model Manager and the Sandia Environmental Decision Support System will also be discussed

Human-Centred Design Workshops in Collaborative Strategic Design Projects: An Educational and Professional Comparison

Science.gov (United States)

Liem, Andre; Sanders, Elizabeth B.-N.

2013-01-01

It has been found that the implementation of Human-centred Design (HCD) methods in the Fuzzy Front-End is not likely to lead to diversification in educational product planning exercises, where time lines are short and executors lack experience. Companies, interested to collaborate with Master-level Industrial Design students on strategic design…

A Kinect-Based Gesture Recognition Approach for a Natural Human Robot Interface

Directory of Open Access Journals (Sweden)

Grazia Cicirelli

2015-03-01

Full Text Available In this paper, we present a gesture recognition system for the development of a human-robot interaction (HRI interface. Kinect cameras and the OpenNI framework are used to obtain real-time tracking of a human skeleton. Ten different gestures, performed by different persons, are defined. Quaternions of joint angles are first used as robust and significant features. Next, neural network (NN classifiers are trained to recognize the different gestures. This work deals with different challenging tasks, such as the real-time implementation of a gesture recognition system and the temporal resolution of gestures. The HRI interface developed in this work includes three Kinect cameras placed at different locations in an indoor environment and an autonomous mobile robot that can be remotely controlled by one operator standing in front of one of the Kinects. Moreover, the system is supplied with a people re-identification module which guarantees that only one person at a time has control of the robot. The system's performance is first validated offline, and then online experiments are carried out, proving the real-time operation of the system as required by a HRI interface.

Human Machine Interfaces for Teleoperators and Virtual Environments Conference

Science.gov (United States)

1990-01-01

In a teleoperator system the human operator senses, moves within, and operates upon a remote or hazardous environment by means of a slave mechanism (a mechanism often referred to as a teleoperator). In a virtual environment system the interactive human machine interface is retained but the slave mechanism and its environment are replaced by a computer simulation. Video is replaced by computer graphics. The auditory and force sensations imparted to the human operator are similarly computer generated. In contrast to a teleoperator system, where the purpose is to extend the operator's sensorimotor system in a manner that facilitates exploration and manipulation of the physical environment, in a virtual environment system, the purpose is to train, inform, alter, or study the human operator to modify the state of the computer and the information environment. A major application in which the human operator is the target is that of flight simulation. Although flight simulators have been around for more than a decade, they had little impact outside aviation presumably because the application was so specialized and so expensive.

Large-scale fuel cycle centres

International Nuclear Information System (INIS)

Smiley, S.H.; Black, K.M.

1977-01-01

The US Nuclear Regulatory Commission (NRC) has considered the nuclear energy centre concept for fuel cycle plants in the Nuclear Energy Centre Site Survey 1975 (NECSS-75) Rep. No. NUREG-0001, an important study mandated by the US Congress in the Energy Reorganization Act of 1974 which created the NRC. For this study, the NRC defined fuel cycle centres as consisting of fuel reprocessing and mixed-oxide fuel fabrication plants, and optional high-level waste and transuranic waste management facilities. A range of fuel cycle centre sizes corresponded to the fuel throughput of power plants with a total capacity of 50,000-300,000MW(e). The types of fuel cycle facilities located at the fuel cycle centre permit the assessment of the role of fuel cycle centres in enhancing the safeguard of strategic special nuclear materials - plutonium and mixed oxides. Siting fuel cycle centres presents a smaller problem than siting reactors. A single reprocessing plant of the scale projected for use in the USA (1500-2000t/a) can reprocess fuel from reactors producing 50,000-65,000MW(e). Only two or three fuel cycle centres of the upper limit size considered in the NECSS-75 would be required in the USA by the year 2000. The NECSS-75 fuel cycle centre evaluation showed that large-scale fuel cycle centres present no real technical siting difficulties from a radiological effluent and safety standpoint. Some construction economies may be achievable with fuel cycle centres, which offer opportunities to improve waste-management systems. Combined centres consisting of reactors and fuel reprocessing and mixed-oxide fuel fabrication plants were also studied in the NECSS. Such centres can eliminate shipment not only of Pu but also mixed-oxide fuel. Increased fuel cycle costs result from implementation of combined centres unless the fuel reprocessing plants are commercial-sized. Development of Pu-burning reactors could reduce any economic penalties of combined centres. The need for effective fissile

Development of an evaluation technique for human-machine interface

Energy Technology Data Exchange (ETDEWEB)

Min, Dae Hwan; Koo, Sang Hui; Ahn, Won Yeong; Ryu, Yeong Shin [Korea Univ., Seoul (Korea, Republic of)

1997-07-15

The purpose of this study is two-fold : firstly to establish an evaluation technique for HMI(Human Machine Interface) in NPPs(Nuclear Power Plants) and secondly to develop an architecture of a support system which can be used for the evaluation of HMI. In order to establish an evaluation technique, this study conducted literature review on basic theories of cognitive science studies and summarized the cognitive characteristics of humans. This study also surveyed evaluation techniques of HMI in general, and reviewed studies on the evaluation of HMI in NPPs. On the basis of this survey, the study established a procedure for the evaluation of HMI in NPPs in Korea and laid a foundation for empirical verification.

Development of an evaluation technique for human-machine interface

International Nuclear Information System (INIS)

Min, Dae Hwan; Koo, Sang Hui; Ahn, Won Yeong; Ryu, Yeong Shin

1997-07-01

The purpose of this study is two-fold : firstly to establish an evaluation technique for HMI(Human Machine Interface) in NPPs(Nuclear Power Plants) and secondly to develop an architecture of a support system which can be used for the evaluation of HMI. In order to establish an evaluation technique, this study conducted literature review on basic theories of cognitive science studies and summarized the cognitive characteristics of humans. This study also surveyed evaluation techniques of HMI in general, and reviewed studies on the evaluation of HMI in NPPs. On the basis of this survey, the study established a procedure for the evaluation of HMI in NPPs in Korea and laid a foundation for empirical verification

A Conceptual Architecture for Adaptive Human-Computer Interface of a PT Operation Platform Based on Context-Awareness

Directory of Open Access Journals (Sweden)

Qing Xue

2014-01-01

Full Text Available We present a conceptual architecture for adaptive human-computer interface of a PT operation platform based on context-awareness. This architecture will form the basis of design for such an interface. This paper describes components, key technologies, and working principles of the architecture. The critical contents covered context information modeling, processing, relationship establishing between contexts and interface design knowledge by use of adaptive knowledge reasoning, and visualization implementing of adaptive interface with the aid of interface tools technology.

Genocide: The Ultimate Human Rights Problem.

Science.gov (United States)

Charny, Israel W.

1987-01-01

Argues for a more humanistic definition of genocide; one that includes the intentional murder of a group of human beings on the basis of any shared identity. Identifies the Holocaust as the world's major genocidal event but urges recognition of the Armenian, Cambodian, and similar tragedies. Proposes an early-warning organization to monitor and…

Brain-Computer Interfaces Applying Our Minds to Human-computer Interaction

CERN Document Server

Tan, Desney S

2010-01-01

For generations, humans have fantasized about the ability to create devices that can see into a person's mind and thoughts, or to communicate and interact with machines through thought alone. Such ideas have long captured the imagination of humankind in the form of ancient myths and modern science fiction stories. Recent advances in cognitive neuroscience and brain imaging technologies have started to turn these myths into a reality, and are providing us with the ability to interface directly with the human brain. This ability is made possible through the use of sensors that monitor physical p

Brain-Computer Interfaces Revolutionizing Human-Computer Interaction

CERN Document Server

Graimann, Bernhard; Allison, Brendan

2010-01-01

A brain-computer interface (BCI) establishes a direct output channel between the human brain and external devices. BCIs infer user intent via direct measures of brain activity and thus enable communication and control without movement. This book, authored by experts in the field, provides an accessible introduction to the neurophysiological and signal-processing background required for BCI, presents state-of-the-art non-invasive and invasive approaches, gives an overview of current hardware and software solutions, and reviews the most interesting as well as new, emerging BCI applications. The book is intended not only for students and young researchers, but also for newcomers and other readers from diverse backgrounds keen to learn about this vital scientific endeavour.

Overview Electrotactile Feedback for Enhancing Human Computer Interface

Science.gov (United States)

Pamungkas, Daniel S.; Caesarendra, Wahyu

2018-04-01

To achieve effective interaction between a human and a computing device or machine, adequate feedback from the computing device or machine is required. Recently, haptic feedback is increasingly being utilised to improve the interactivity of the Human Computer Interface (HCI). Most existing haptic feedback enhancements aim at producing forces or vibrations to enrich the user’s interactive experience. However, these force and/or vibration actuated haptic feedback systems can be bulky and uncomfortable to wear and only capable of delivering a limited amount of information to the user which can limit both their effectiveness and the applications they can be applied to. To address this deficiency, electrotactile feedback is used. This involves delivering haptic sensations to the user by electrically stimulating nerves in the skin via electrodes placed on the surface of the skin. This paper presents a review and explores the capability of electrotactile feedback for HCI applications. In addition, a description of the sensory receptors within the skin for sensing tactile stimulus and electric currents alsoseveral factors which influenced electric signal to transmit to the brain via human skinare explained.

TA-55 facility control system upgrade project - human-system interface functional requirements

International Nuclear Information System (INIS)

Atkins, W.H.; Pope, N.G.; Turner, W.J.; Brown, R.E.

1995-11-01

The functional requirements for that part of the Technical Area (TA)-55 Operations Center Upgrade Project that involves the human-system interface (HSI) are described in this document. The upgrade project seeks to replace completely the center's existing computerized data acquisition and display system, which consists of the field multiplexer units, Data General computer systems, and associated peripherals and software. The upgrade project has two parts-the Facility Data Acquisition Interface System (FDAIS) and the HSI. The HSI comprises software and hardware to provide a high-level graphical operator interface to the data acquisition system, as well as data archiving, alarm annunciation, and logging. The new system will be built with modern, commercially available components; it will improve reliability and maintainability, and it can be expanded for future needs

Evaluasi Human Machine Interface Menggunakan Kriteria Usability Pada Sistem E-learning Perguruan Tinggi

Directory of Open Access Journals (Sweden)

Akhmad Qashlim

2016-01-01

Full Text Available Integration HMI with usability in user interface design process is a standart of the success of a website. The design process is done through the approach to the end user to find a problem solution of human machine interface phenomena. It can also generate the maximum level of satisfaction and success of implementation of the website. The purpose of this research is to evaluate HMI using usabilitycriteria to know the application of HMI concept in e-learning and provide proposals for improvements to the HMI. Questionnaire Data were processed using a descriptive analysis and methods of CFA to know the variables that are weakest and which indicators have an important role in shaping the research variables. Evaluation results indicate the application concept of HMI in the e-learning had been done but not the maximum. Data analysis of the results obtained that the main problem lies in the accessibility criteria in the meantime indicator latent variables from forming error prevention, learnability, memorability, visibility and accessibility of influential factor loading values indicated significantly (unidimensionalitas in shaping the criteria of latent variables in first-order CFA. The end result of this research is the proposal of improvement as a HMI solution in the form of principles and technicsuser interface design. This solution is focused on the development of standards for the quality of the interface in e-learning systems and not on the digital learning content presented on the e-learning system. Keywords: Descriptive analisis; Human machine interface; Usability; Confirmatory factor analisys; Elearning

Development of guidelines to review advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.

1993-01-01

Advanced control rooms (ACRs) will utilize advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than 10 yr ago, considerably prior to these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this paper is to discuss the development, evaluation, and current status of the Advanced HSI Design Review Guideline

Interface design and human factors considerations for model-based tight glycemic control in critical care.

Science.gov (United States)

Ward, Logan; Steel, James; Le Compte, Aaron; Evans, Alicia; Tan, Chia-Siong; Penning, Sophie; Shaw, Geoffrey M; Desaive, Thomas; Chase, J Geoffrey

2012-01-01

Tight glycemic control (TGC) has shown benefits but has been difficult to implement. Model-based methods and computerized protocols offer the opportunity to improve TGC quality and compliance. This research presents an interface design to maximize compliance, minimize real and perceived clinical effort, and minimize error based on simple human factors and end user input. The graphical user interface (GUI) design is presented by construction based on a series of simple, short design criteria based on fundamental human factors engineering and includes the use of user feedback and focus groups comprising nursing staff at Christchurch Hospital. The overall design maximizes ease of use and minimizes (unnecessary) interaction and use. It is coupled to a protocol that allows nurse staff to select measurement intervals and thus self-manage workload. The overall GUI design is presented and requires only one data entry point per intervention cycle. The design and main interface are heavily focused on the nurse end users who are the predominant users, while additional detailed and longitudinal data, which are of interest to doctors guiding overall patient care, are available via tabs. This dichotomy of needs and interests based on the end user's immediate focus and goals shows how interfaces must adapt to offer different information to multiple types of users. The interface is designed to minimize real and perceived clinical effort, and ongoing pilot trials have reported high levels of acceptance. The overall design principles, approach, and testing methods are based on fundamental human factors principles designed to reduce user effort and error and are readily generalizable. © 2012 Diabetes Technology Society.

The dream of an ultimate theory

International Nuclear Information System (INIS)

Weinberg, S.

1997-10-01

Steven Weinberg describes how the dream of an ultimate theory began when one tried to unify the fundamental laws governing the stars constellations as elementary particles: electromagnetism, weak-electro theory then standard model which gives only one quantity out of its fields, the gravitation. He tries to explain to what an ultimate theory could look like. but the dream of an ultimate theory is not yet realized, there are some elementary particles to find before and then to build superconducting super colliders. The europe made it. the dream of an ultimate theory became an european dream. (N.C.)

Integration of an intelligent systems behavior simulator and a scalable soldier-machine interface

Science.gov (United States)

Johnson, Tony; Manteuffel, Chris; Brewster, Benjamin; Tierney, Terry

2007-04-01

As the Army's Future Combat Systems (FCS) introduce emerging technologies and new force structures to the battlefield, soldiers will increasingly face new challenges in workload management. The next generation warfighter will be responsible for effectively managing robotic assets in addition to performing other missions. Studies of future battlefield operational scenarios involving the use of automation, including the specification of existing and proposed technologies, will provide significant insight into potential problem areas regarding soldier workload. The US Army Tank Automotive Research, Development, and Engineering Center (TARDEC) is currently executing an Army technology objective program to analyze and evaluate the effect of automated technologies and their associated control devices with respect to soldier workload. The Human-Robotic Interface (HRI) Intelligent Systems Behavior Simulator (ISBS) is a human performance measurement simulation system that allows modelers to develop constructive simulations of military scenarios with various deployments of interface technologies in order to evaluate operator effectiveness. One such interface is TARDEC's Scalable Soldier-Machine Interface (SMI). The scalable SMI provides a configurable machine interface application that is capable of adapting to several hardware platforms by recognizing the physical space limitations of the display device. This paper describes the integration of the ISBS and Scalable SMI applications, which will ultimately benefit both systems. The ISBS will be able to use the Scalable SMI to visualize the behaviors of virtual soldiers performing HRI tasks, such as route planning, and the scalable SMI will benefit from stimuli provided by the ISBS simulation environment. The paper describes the background of each system and details of the system integration approach.

The effect of human-mattress interface's temperature on perceived thermal comfort.

Science.gov (United States)

Califano, R; Naddeo, A; Vink, P

2017-01-01

In recent years, methods that allow for an objective evaluation of perceived comfort, in terms of postural, physiological, cognitive and environmental comfort, have received a great deal of attention from researchers. This paper focuses on one of the factors that influences physiological comfort perception: the temperature difference between users and the objects with which they interact. The first aim is to create a measuring system that does not affect the perceived comfort during the temperatures' acquisition. The main aim is to evaluate how the temperature at the human-mattress interface can affect the level of perceived comfort. A foam mattress has been used for testing in order to take into account the entire back part of the human body. The temperature at the interface was registered by fourteen 100 Ohm Platinum RTDs (Resistance Temperature Detectors) placed on the mattress under the trunk, the shoulders, the buttocks, the legs, the thighs, the arms and the forearms of the test subject. 29 subjects participated in a comfort test in a humidity controlled environment. The test protocol involved: dress-code, anthropometric-based positioning on mattress, environment temperature measuring and an acclimatization time before the test. At the end of each test, each of the test subject's thermal sensations and the level of comfort perception were evaluated using the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) scale. The data analyses concerned, in the first instance, correlations between the temperature at the interface and comfort levels of the different parts of the body. Then the same analyses were performed independently of the body parts being considered. The results demonstrated that there was no strong correlation among the studied variables and that the total increase of temperature at interface is associated with a reduction in comfort. Copyright © 2016 Elsevier Ltd. All rights reserved.

Outline of human machine interface at Rokkasho reprocessing plant

International Nuclear Information System (INIS)

Niioka, T.; Miyazaki, T.; Fujita, D.; Esashika, A.; Yoshida, Y.; Nakamura, W.; Tochigi, T.; Yoshimoto, A.; Yokoi, M.

2006-01-01

The Japan Nuclear Fuel Limited (JNFL) has been performing the active tests since the end of March, 2006, for its Rokkasho Reprocessing Plant using the spent fuels retrieved from the Light Water Reactors. At the early stage of the tests relatively low burn-up fuels have been used, and the burn-up will be increased at later stages until the start of commercial operation planned next year. The plant is operated from the main control room in the Control Building, where two types of operator consoles are located for plant monitoring and operation. The Operator Interface Station (OIS) driven by computer systems is chiefly used for instrumentation and control for production activities during normal operation. In addition to this, safety panels composed of hardware circuits are installed for nuclear safety functions such as criticality safety management, explosion protection, and confinement of radioactive materials. This paper outlines the Human Machine Interface features applied to the Rokkasho Reprocessing Plant. (authors)

Design of Human-Machine Interface and altering of pelvic obliquity with RGR Trainer.

Science.gov (United States)

Pietrusinski, Maciej; Unluhisarcikli, Ozer; Mavroidis, Constantinos; Cajigas, Iahn; Bonato, Paolo

2011-01-01

The Robotic Gait Rehabilitation (RGR) Trainer targets secondary gait deviations in stroke survivors undergoing rehabilitation. Using an impedance control strategy and a linear electromagnetic actuator, the device generates a force field to control pelvic obliquity through a Human-Machine Interface (i.e. a lower body exoskeleton). Herein we describe the design of the RGR Trainer Human-Machine Interface (HMI) and we demonstrate the system's ability to alter the pattern of movement of the pelvis during gait in a healthy subject. Results are shown for experiments during which we induced hip-hiking - in healthy subjects. Our findings indicate that the RGR Trainer has the ability of affecting pelvic obliquity during gait. Furthermore, we provide preliminary evidence of short-term retention of the modified pelvic obliquity pattern induced by the RGR Trainer. © 2011 IEEE

Evaluation method of human-system interface for nuclear power plants

International Nuclear Information System (INIS)

Tanji, Junichi; Kawai, Jun; Masui, Takao; Ezaki, Ikuko

2000-01-01

We have developed HSI evaluation method based on a model of human cognitive processes in order to provide the viewpoint of the evaluation on the operability of interface. The model describes systematically the human error categories of GEMS by Reason. Based on the model together with reference to the other published information such as NUREG-0700Rev.1, the evaluation items for HSI have embodied in the electronic handbook HIBISCUS. The applicability of HIBISCUS have been assessed by evaluating experimental results using a simulator equipped with control panel using CRTs and touch operations. From the results, the usefulness of the handbook has been confirmed. (author)

Evaluation method of human-system interface for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Tanji, Junichi [Nuclear Power Engineering Corp. (NUPEC), Tokyo (Japan); Kawai, Jun; Masui, Takao; Ezaki, Ikuko [Mitsubishi Research Inst., Tokyo (Japan)

2000-10-01

We have developed HSI evaluation method based on a model of human cognitive processes in order to provide the viewpoint of the evaluation on the operability of interface. The model describes systematically the human error categories of GEMS by Reason. Based on the model together with reference to the other published information such as NUREG-0700Rev.1, the evaluation items for HSI have embodied in the electronic handbook HIBISCUS. The applicability of HIBISCUS have been assessed by evaluating experimental results using a simulator equipped with control panel using CRTs and touch operations. From the results, the usefulness of the handbook has been confirmed. (author)

Concussion Prevalence in Competitive Ultimate Frisbee Players

Science.gov (United States)

Lazar, Damien J.; Lichtenstein, Jonathan D.; Tybor, David J.

2018-01-01

Background: Ultimate Frisbee (ultimate) is a fast-growing, popular sport played nationally by over 4 million athletes. While several studies have examined injury rates in ultimate, no work has investigated the prevalence of concussions specifically or players’ knowledge and management of those injuries. Purpose: To estimate the lifetime prevalence of concussions in ultimate and to assess players’ knowledge of concussions as well as their concussion management behaviors. Study Design: Descriptive epidemiology study. Methods: From June to November 2015, we collected ultimate-related concussion data via an anonymous web-based survey, the Concussion in Ultimate Frisbee Survey, from a convenience sample of 787 male and female ultimate players across the United States. Results: There were 553 male and 234 female respondents included in the analysis; 26.58% of men and 24.79% of women reported that they had sustained at least 1 concussion while playing ultimate, with 45.58% and 43.10% of those men and women, respectively, reporting multiple concussions. A total of 67.81% of men and 78.21% of women stated that they would remove themselves from play after sustaining a given concussion, although 45.99% of men and 37.62% of women indicated that they had returned to play in the same game or practice. Conclusion: Our preliminary data suggest that concussions do commonly occur in competitive ultimate and that better education and management of concussions in ultimate athletes are needed. This study is an important first step in deepening our understanding of these issues. PMID:29552572

Human-Vehicle Interface for Semi-Autonomous Operation of Uninhabited Aero Vehicles

Science.gov (United States)

Jones, Henry L.; Frew, Eric W.; Woodley, Bruce R.; Rock, Stephen M.

2001-01-01

The robustness of autonomous robotic systems to unanticipated circumstances is typically insufficient for use in the field. The many skills of human user often fill this gap in robotic capability. To incorporate the human into the system, a useful interaction between man and machine must exist. This interaction should enable useful communication to be exchanged in a natural way between human and robot on a variety of levels. This report describes the current human-robot interaction for the Stanford HUMMINGBIRD autonomous helicopter. In particular, the report discusses the elements of the system that enable multiple levels of communication. An intelligent system agent manages the different inputs given to the helicopter. An advanced user interface gives the user and helicopter a method for exchanging useful information. Using this human-robot interaction, the HUMMINGBIRD has carried out various autonomous search, tracking, and retrieval missions.

Development of guidelines to review advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.

1993-01-01

Advanced control rooms (ACRS) will utilize advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operators overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well prior to these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this paper is to discuss the development, evaluation, and current status of the Advanced HSI Design Review Guideline, hereafter referred to as the ''Guideline.''

The ultimate quotable Einstein

CERN Document Server

2011-01-01

Here is the definitive new edition of the hugely popular collection of Einstein quotations that has sold tens of thousands of copies worldwide and been translated into twenty-five languages. The Ultimate Quotable Einstein features 400 additional quotes, bringing the total to roughly 1,600 in all. This ultimate edition includes new sections--"On and to Children," "On Race and Prejudice," and "Einstein's Verses: A Small Selection"--as well as a chronology of Einstein's life and accomplishments, Freeman Dyson's authoritative foreword, and new commentary by Alice Calaprice.

Exploring Ultimate Water Capillary Evaporation in Nanoscale Conduits.

Science.gov (United States)

Li, Yinxiao; Alibakhshi, Mohammad Amin; Zhao, Yihong; Duan, Chuanhua

2017-08-09

Capillary evaporation in nanoscale conduits is an efficient heat/mass transfer strategy that has been widely utilized by both nature and mankind. Despite its broad impact, the ultimate transport limits of capillary evaporation in nanoscale conduits, governed by the evaporation/condensation kinetics at the liquid-vapor interface, have remained poorly understood. Here we report experimental study of the kinetic limits of water capillary evaporation in two dimensional nanochannels using a novel hybrid channel design. Our results show that the kinetic-limited evaporation fluxes break down the limits predicated by the classical Hertz-Knudsen equation by an order of magnitude, reaching values up to 37.5 mm/s with corresponding heat fluxes up to 8500 W/cm 2 . The measured evaporation flux increases with decreasing channel height and relative humidity but decreases as the channel temperature decreases. Our findings have implications for further understanding evaporation at the nanoscale and developing capillary evaporation-based technologies for both energy- and bio-related applications.

Effects of muscle fatigue on the usability of a myoelectric human-computer interface.

Science.gov (United States)

Barszap, Alexander G; Skavhaug, Ida-Maria; Joshi, Sanjay S

2016-10-01

Electromyography-based human-computer interface development is an active field of research. However, knowledge on the effects of muscle fatigue for specific devices is limited. We have developed a novel myoelectric human-computer interface in which subjects continuously navigate a cursor to targets by manipulating a single surface electromyography (sEMG) signal. Two-dimensional control is achieved through simultaneous adjustments of power in two frequency bands through a series of dynamic low-level muscle contractions. Here, we investigate the potential effects of muscle fatigue during the use of our interface. In the first session, eight subjects completed 300 cursor-to-target trials without breaks; four using a wrist muscle and four using a head muscle. The wrist subjects returned for a second session in which a static fatiguing exercise took place at regular intervals in-between cursor-to-target trials. In the first session we observed no declines in performance as a function of use, even after the long period of use. In the second session, we observed clear changes in cursor trajectories, paired with a target-specific decrease in hit rates. Copyright © 2016 Elsevier B.V. All rights reserved.

Ultimate Explanations of the Universe

CERN Document Server

Heller, Michael

2009-01-01

We humans are collectively driven by a powerful - yet not fully explained - instinct to understand. We would like to see everything established, proven, laid bare. The more important an issue, the more we desire to see it clarified, stripped of all secrets, all shades of gray. What could be more important than to understand the Universe and ourselves as a part of it? To find a window onto our origin and our destiny? This book examines how far our modern cosmological theories - with their sometimes audacious models, such as inflation, cyclic histories, quantum creation, parallel universes - can take us towards answering these questions. Can such theories lead us to ultimate truths, leaving nothing unexplained? Last, but not least, Heller addresses the thorny problem of why and whether we should expect to find theories with all-encompassing explicative power.

A Wearable-Based and Markerless Human-Manipulator Interface with Feedback Mechanism and Kalman Filters

Directory of Open Access Journals (Sweden)

Ping Zhang

2015-11-01

Full Text Available The objective of this paper is to develop a novel human-manipulator interface which incorporates wearable-based and markerless tracking to interact with the continuous movements of a human operator's hand. Unlike traditional approaches, which usually include contacting devices or physical markers to track the human-limb movements, this interface enables registration of natural movement through a wireless wearable watch and a leap motion sensor. Due to sensor error and tracking failure, the measurements are not made with sufficient accuracy. Two Kalman filters are employed to compensate the noisy and incomplete measurements in real time. Furthermore, due to perceptive limitations and abnormal state signals, the operator is unable to achieve high precision and efficiency in robot manipulation; an adaptive multispace transformation method (AMT is therefore introduced, which serves as a secondary treatment. In addition, in order to allow two-way human-robot interaction, the proposed method provides a vibration feedback mechanism triggered by the wearable watch to call the operator's attention to robot collision incidents or moments where the operator's hand is in a transboundary state. This improves teleoperation.

Impact of familiarity on information complexity in human-computer interfaces

Directory of Open Access Journals (Sweden)

Bakaev Maxim

2016-01-01

Full Text Available A quantitative measure of information complexity remains very much desirable in HCI field, since it may aid in optimization of user interfaces, especially in human-computer systems for controlling complex objects. Our paper is dedicated to exploration of subjective (subject-depended aspect of the complexity, conceptualized as information familiarity. Although research of familiarity in human cognition and behaviour is done in several fields, the accepted models in HCI, such as Human Processor or Hick-Hyman’s law do not generally consider this issue. In our experimental study the subjects performed search and selection of digits and letters, whose familiarity was conceptualized as frequency of occurrence in numbers and texts. The analysis showed significant effect of information familiarity on selection time and throughput in regression models, although the R2 values were somehow low. Still, we hope that our results might aid in quantification of information complexity and its further application for optimizing interaction in human-machine systems.

Interface Realisms

DEFF Research Database (Denmark)

Pold, Søren

2005-01-01

This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly...

Interaction of centres on nucleate boiling

International Nuclear Information System (INIS)

Chekanov, V.V.

1977-01-01

An experimental set-up is described which enables to analyse the growth of a bubble on a heater, the frequency of succession of the bubbles, etc., by the change in the electric signal from a photomultiplier, onto whose photocathode the bubble is projected. The change in the first moments of the statistical distribution of the corresponding parameters (growth time, frequency of succession, and so on) is adopted as the measure of the external effect on the vapour formation centre. It is shown that for single-bubble boiling the greatest effect is exerted by the acoustic waves produced by the bubble in the growth period; during developed boiling one observes mutual suppression of centres spaced at a distance of the order of the detachment diameter. As the heat flux increases, the correlation of the motion of the interface over the heater surface increases as well. When the correlation radius becomes equal to the centre-to-centre distance, the first crisis sets in. It is suggested that heaters with a variable coefficient of temperature conductance along the heat-releasing surface must withstand high subcritical heat fluxes

Addressing the challenges of patient-centred design

Directory of Open Access Journals (Sweden)

Karen LaBat

2009-11-01

Full Text Available Patient-centred design is a relatively new term, but a longstanding concept in clinical practice. This discussion looks at patient-centred design and explores the relationships of patient-centred design to universal design, user-centred design and the newer human-centred design. It also explores why interdisciplinary approaches are needed for patient-centred design and how interdisciplinary collaboration works to address the challenges of patient centred design. Successful patient-centred solutions can grow from collaborations which include shared visions, understanding of both the nature and degree of variation in the patient,materials, and the designed solution, clear regular communication among all parties with careful definition of terms, and respect for the inherent cultures of all disciplines involved.

Buried waste integrated demonstration human engineered control station. Final report

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.

Buried waste integrated demonstration human engineered control station. Final report

International Nuclear Information System (INIS)

1994-09-01

This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system

Shear wall ultimate drift limits

International Nuclear Information System (INIS)

Duffey, T.A.; Goldman, A.; Farrar, C.R.

1994-04-01

Drift limits for reinforced-concrete shear walls are investigated by reviewing the open literature for appropriate experimental data. Drift values at ultimate are determined for walls with aspect ratios ranging up to a maximum of 3.53 and undergoing different types of lateral loading (cyclic static, monotonic static, and dynamic). Based on the geometry of actual nuclear power plant structures exclusive of containments and concerns regarding their response during seismic (i.e.,cyclic) loading, data are obtained from pertinent references for which the wall aspect ratio is less than or equal to approximately 1, and for which testing is cyclic in nature (typically displacement controlled). In particular, lateral deflections at ultimate load, and at points in the softening region beyond ultimate for which the load has dropped to 90, 80, 70, 60, and 50 percent of its ultimate value, are obtained and converted to drift information. The statistical nature of the data is also investigated. These data are shown to be lognormally distributed, and an analysis of variance is performed. The use of statistics to estimate Probability of Failure for a shear wall structure is illustrated

Human-centred automation programme: review of experiment related studies

International Nuclear Information System (INIS)

Grimstad, Tone; Andresen, Gisle; Skjerve, Ann Britt Miberg

2000-04-01

Twenty-three empirical studies concerning automation and performance have been reviewed. The purposes of the review are to support experimental studies in the Human-Centred Automation (HCA) programme and to develop a general theory on HCA. Each study was reviewed with regard to twelve study characteristics: domain, type of study, purpose, definition of automation, variables, theoretical basis, models of operator performance, methods applied, experimental design, outcome, stated scope of results, strengths and limitations. Seven of the studies involved domain experts, the rest used students as participants. The majority of the articles originated from the aviation domain: only the study conducted in HAMMLAB considered process control in power plants. In the experimental studies, the independent variable was level of automation, or reliability of automation, while the most common dependent variables were workload, situation awareness, complacency, trust, and criteria of performance, e.g., number of correct responses or response time. Although the studies highlight important aspects of human-automation interaction, it is still unclear how system performance is affected. Nevertheless, the fact that many factors seem to be involved is taken as support for the system-oriented approach of the HCA programme. In conclusion, the review provides valuable input both to the design of experiments and to the development of a general theory. (Author). refs

Cognitive Human-Machine Interface Applied in Remote Support for Industrial Robot Systems

Directory of Open Access Journals (Sweden)

Tomasz Kosicki

2013-10-01

Full Text Available An attempt is currently being made to widely introduce industrial robots to Small-Medium Enterprises (SMEs. Since the enterprises usually employ too small number of robot units to afford specialized departments for robot maintenance, they must be provided with inexpensive and immediate support remotely. This paper evaluates whether the support can be provided by means of Cognitive Info-communication – communication in which human cognitive capabilities are extended irrespectively of geographical distances. The evaluations are given with an aid of experimental system that consists of local and remote rooms, which are physically separated – a six-degree-of-freedom NACHI SH133-03 industrial robot is situated in the local room, while the operator, who supervises the robot by means of audio-visual Cognitive Human-Machine Interface, is situated in the remote room. The results of simple experiments show that Cognitive Info-communication is not only efficient mean to provide the support remotely, but is probably also a powerful tool to enhance interaction with any data-rich environment that require good conceptual understanding of system's state and careful attention management. Furthermore, the paper discusses data presentation and reduction methods for data-rich environments, as well as introduces the concepts of Naturally Acquired Data and Cognitive Human-Machine Interfaces.

Physical demands in competitive ultimate frisbee

DEFF Research Database (Denmark)

Krustrup, Peter; Mohr, Magni

2015-01-01

The objective was to study game demands in competitive ultimate Frisbee by performing match analysis during a game. Thirteen moderately trained (Yo-Yo intermittent recovery test levels 1 and 2 [Yo-Yo IR1 and IR2] performance: 1790 ± 382 m and 657 ± 225 m, respectively) competitive male ultimate...... = 0.74, p ≤ 0.05). Ultimate Frisbee is an intense intermittent team sport with high cardiovascular loading and clear indications of fatigue toward the end of each half. Yo-Yo IR test performances correlate with physical match performance....

Design of Human – Machine Interface and Altering of Pelvic Obliquity with RGR Trainer

Science.gov (United States)

Pietrusinski, Maciej; Unluhisarcikli, Ozer; Mavroidis, Constantinos; Cajigas, Iahn; Bonato, Paolo

2012-01-01

The Robotic Gait Rehabilitation (RGR) Trainer targets secondary gait deviations in stroke survivors undergoing rehabilitation. Using an impedance control strategy and a linear electromagnetic actuator, the device generates a force field to control pelvic obliquity through a Human-Machine Interface (i.e. a lower body exoskeleton). Herein we describe the design of the RGR Trainer Human-Machine Interface (HMI) and we demonstrate the system’s ability to alter the pattern of movement of the pelvis during gait in a healthy subject. Results are shown for experiments during which we induced hip-hiking – in healthy subjects. Our findings indicate that the RGR Trainer has the ability of affecting pelvic obliquity during gait. Furthermore, we provide preliminary evidence of short-term retention of the modified pelvic obliquity pattern induced by the RGR Trainer. PMID:22275693

Studying human-automation interactions: methodological lessons learned from the human-centred automation experiments 1997-2001

International Nuclear Information System (INIS)

Massaiu, Salvatore; Skjerve, Ann Britt Miberg; Skraaning, Gyrd Jr.; Strand, Stine; Waeroe, Irene

2004-04-01

This report documents the methodological lessons learned from the Human Centred Automation (HCA) programme both in terms of psychometric evaluation of the measurement techniques developed for human-automation interaction study, and in terms of the application of advanced statistical methods for analysis of experiments. The psychometric evaluation is based on data from the four experiments performed within the HCA programme. The result is a single-source reference text of measurement instruments for the study of human-automation interaction, part of which were specifically developed by the programme. The application of advanced statistical techniques is exemplified by additional analyses performed on the IPSN-HCA experiment of 1998. Special importance is given to the statistical technique Structural Equation Modeling, for the possibility it offers to advance, and empirically test, comprehensive explanations about human-automation interactions. The additional analyses of the IPSN-HCA experiment investigated how the operators formed judgments about their own performance. The issue is of substantive interest for human automation interaction research because the operators' over- or underestimation of their own performance could be seen as a symptom of human-machine mismatch, and a potential latent failure. These analyses concluded that it is the interplay between (1) the level of automation and several factors that determines the operators' bias in performance self-estimation: (2) the nature of the task, (3) the level of scenario complexity, and (4) the level of trust in the automatic system. A structural model that expresses the interplay of all these factors was empirically evaluated and was found able to provide a concise and elegant explanation of the intricate pattern of relationships between the identified factors. (Author)

CANDU 9 Control Centre Mockup

International Nuclear Information System (INIS)

Webster, A.; Macbeth, M.J.

1996-01-01

This paper provides a summary of the design process being followed, the benefits of applying a systematic design using human factors engineering, presents an overview of the CANDU 9 control centre mockup facility, illustrates the control centre mockup with photographs of the 3D CADD model and the full scale mockup, and provides an update on the current status of the project. (author)

The development and evaluation of guidelines for the review of advanced human-system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Wachtel, J.

1992-01-01

Advanced control rooms for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes a general approach to advanced human-system interface review, development of human factors guidelines to support NRC safety reviews of advanced systems, and the results of a guideline test and evaluation program

Interface characterization of plasma sprayed hydroxy apatite coat on Ti-6 Al-4 V

International Nuclear Information System (INIS)

Ghorbani, M.; Afshar, A.; Ehsani, N.; Saeri, R.; Sorrell, C.C.

2002-01-01

Hydroxyapatite, a material proven to be biocompatible within the human body, has been produced to a high level of purity. This material has been applied as a coating on Ti-6 Al-4 V alloy by using the air plasma spraying technique.The coat was characterized with SEM, XRD, FTIR and Raman spectroscopy methods to consist of a mixture of calcium phosphates including H A mainly and traces of tricalcium phosphate, tetra calcium phosphate and calcium oxide phases. This H A phase was dehydrated and partially decomposed to oxy apatite and amorphous H A. EPMA method was used cross-sectionally on the interface in order to determine the depth profiles and elemental maps of Calcium, Phosphorous, Oxygen, Titanium, Vanadium and Aluminum elements.The results clearly showed to evidence of interdiffusion at the interface. Ultimately, the diffusion depth of each element was studied and compared with each other

The Human Blood Metabolome-Transcriptome Interface.

Directory of Open Access Journals (Sweden)

Jörg Bartel

2015-06-01

Full Text Available Biological systems consist of multiple organizational levels all densely interacting with each other to ensure function and flexibility of the system. Simultaneous analysis of cross-sectional multi-omics data from large population studies is a powerful tool to comprehensively characterize the underlying molecular mechanisms on a physiological scale. In this study, we systematically analyzed the relationship between fasting serum metabolomics and whole blood transcriptomics data from 712 individuals of the German KORA F4 cohort. Correlation-based analysis identified 1,109 significant associations between 522 transcripts and 114 metabolites summarized in an integrated network, the 'human blood metabolome-transcriptome interface' (BMTI. Bidirectional causality analysis using Mendelian randomization did not yield any statistically significant causal associations between transcripts and metabolites. A knowledge-based interpretation and integration with a genome-scale human metabolic reconstruction revealed systematic signatures of signaling, transport and metabolic processes, i.e. metabolic reactions mainly belonging to lipid, energy and amino acid metabolism. Moreover, the construction of a network based on functional categories illustrated the cross-talk between the biological layers at a pathway level. Using a transcription factor binding site enrichment analysis, this pathway cross-talk was further confirmed at a regulatory level. Finally, we demonstrated how the constructed networks can be used to gain novel insights into molecular mechanisms associated to intermediate clinical traits. Overall, our results demonstrate the utility of a multi-omics integrative approach to understand the molecular mechanisms underlying both normal physiology and disease.

A novel device for head gesture measurement system in combination with eye-controlled human machine interface

Science.gov (United States)

Lin, Chern-Sheng; Ho, Chien-Wa; Chang, Kai-Chieh; Hung, San-Shan; Shei, Hung-Jung; Yeh, Mau-Shiun

2006-06-01

This study describes the design and combination of an eye-controlled and a head-controlled human-machine interface system. This system is a highly effective human-machine interface, detecting head movement by changing positions and numbers of light sources on the head. When the users utilize the head-mounted display to browse a computer screen, the system will catch the images of the user's eyes with CCD cameras, which can also measure the angle and position of the light sources. In the eye-tracking system, the program in the computer will locate each center point of the pupils in the images, and record the information on moving traces and pupil diameters. In the head gesture measurement system, the user wears a double-source eyeglass frame, so the system catches images of the user's head by using a CCD camera in front of the user. The computer program will locate the center point of the head, transferring it to the screen coordinates, and then the user can control the cursor by head motions. We combine the eye-controlled and head-controlled human-machine interface system for the virtual reality applications.

Materials and optimized designs for human-machine interfaces via epidermal electronics.

Science.gov (United States)

Jeong, Jae-Woong; Yeo, Woon-Hong; Akhtar, Aadeel; Norton, James J S; Kwack, Young-Jin; Li, Shuo; Jung, Sung-Young; Su, Yewang; Lee, Woosik; Xia, Jing; Cheng, Huanyu; Huang, Yonggang; Choi, Woon-Seop; Bretl, Timothy; Rogers, John A

2013-12-17

Thin, soft, and elastic electronics with physical properties well matched to the epidermis can be conformally and robustly integrated with the skin. Materials and optimized designs for such devices are presented for surface electromyography (sEMG). The findings enable sEMG from wide ranging areas of the body. The measurements have quality sufficient for advanced forms of human-machine interface. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Direct Evidence of Intrinsic Blue Fluorescence from Oligomeric Interfaces of Human Serum Albumin.

Science.gov (United States)

Bhattacharya, Arpan; Bhowmik, Soumitra; Singh, Amit K; Kodgire, Prashant; Das, Apurba K; Mukherjee, Tushar Kanti

2017-10-10

The molecular origin behind the concentration-dependent intrinsic blue fluorescence of human serum albumin (HSA) is not known yet. This unusual blue fluorescence is believed to be a characteristic feature of amyloid-like fibrils of protein/peptide and originates due to the delocalization of peptide bond electrons through the extended hydrogen bond networks of cross-β-sheet structure. Herein, by combining the results of spectroscopy, size exclusion chromatography, native gel electrophoresis, and confocal microscopy, we have shown that the intrinsic blue fluorescence of HSA exclusively originates from oligomeric interfaces devoid of any amyloid-like fibrillar structure. Our study suggests that this low energy fluorescence band is not due to any particular residue/sequence, but rather it is a common feature of self-assembled peptide bonds. The present findings of intrinsic blue fluorescence from oligomeric interfaces pave the way for future applications of this unique visual phenomenon for early stage detection of various protein aggregation related human diseases.

An atomistic analysis of the interface mobility in a massive transformation

International Nuclear Information System (INIS)

Bos, C.; Sommer, F.; Mittemeijer, E.J.

2005-01-01

A new multi-lattice kinetic Monte Carlo method has been used for an atomistic study on the interpretation of the interface mobility parameter for a massive face-centred cubic (fcc) to body-centred cubic (bcc) transformation in a single element system. For lateral growth of bcc in a system with an fcc(111)//bcc(110) and fcc[112-bar ]//bcc[001-bar ] interface orientation the overall activation energy for the interface mobility parameter is governed by energetically unfavourable atomic jumps. The atoms on the fcc lattice often cannot jump directly to bcc lattice sites because neighbouring atoms block the empty bcc sites. By single unfavourable jumps and by groups of unfavourable jumps a path from fcc to bcc is created. The necessity of these unfavourable jumps leads to an overall activation energy considerably larger than the activation energy barrier for a single atomic jump

Experiences in the application of human factors engineering to human-system interface modernization

International Nuclear Information System (INIS)

Trueba Alonso, Pedro; Illobre, Luis Fernandez; Ortega Pascual, Fernando

2014-01-01

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user. (authors)

Experiences in the application of human factors engineering to human-system interface modernization

International Nuclear Information System (INIS)

Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando

2015-01-01

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

Experiences in the application of human factors engineering to human-system interface modernization

Energy Technology Data Exchange (ETDEWEB)

Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando [Tecnatom S.A., San Sebastian de los Reyes (Spain). Simulation and Control Rooms Div.

2015-07-15

Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

Reverse zoonosis of influenza to swine: new perspectives on the human-animal interface.

Science.gov (United States)

Nelson, Martha I; Vincent, Amy L

2015-03-01

The origins of the 2009 influenza A (H1N1) pandemic in swine are unknown, highlighting gaps in our understanding of influenza A virus (IAV) ecology and evolution. We review how recently strengthened influenza virus surveillance in pigs has revealed that influenza virus transmission from humans to swine is far more frequent than swine-to-human zoonosis, and is central in seeding swine globally with new viral diversity. The scale of global human-to-swine transmission represents the largest 'reverse zoonosis' of a pathogen documented to date. Overcoming the bias towards perceiving swine as sources of human viruses, rather than recipients, is key to understanding how the bidirectional nature of the human-animal interface produces influenza threats to both hosts. Published by Elsevier Ltd.

Mechanically Compliant Electronic Materials for Wearable Photovoltaics and Human-Machine Interfaces

Science.gov (United States)

O'Connor, Timothy Francis, III

Applications of stretchable electronic materials for human-machine interfaces are described herein. Intrinsically stretchable organic conjugated polymers and stretchable electronic composites were used to develop stretchable organic photovoltaics (OPVs), mechanically robust wearable OPVs, and human-machine interfaces for gesture recognition, American Sign Language Translation, haptic control of robots, and touch emulation for virtual reality, augmented reality, and the transmission of touch. The stretchable and wearable OPVs comprise active layers of poly-3-alkylthiophene:phenyl-C61-butyric acid methyl ester (P3AT:PCBM) and transparent conductive electrodes of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and devices could only be fabricated through a deep understanding of the connection between molecular structure and the co-engineering of electronic performance with mechanical resilience. The talk concludes with the use of composite piezoresistive sensors two smart glove prototypes. The first integrates stretchable strain sensors comprising a carbon-elastomer composite, a wearable microcontroller, low energy Bluetooth, and a 6-axis accelerometer/gyroscope to construct a fully functional gesture recognition glove capable of wirelessly translating American Sign Language to text on a cell phone screen. The second creates a system for the haptic control of a 3D printed robot arm, as well as the transmission of touch and temperature information.

A video, text, and speech-driven realistic 3-d virtual head for human-machine interface.

Science.gov (United States)

Yu, Jun; Wang, Zeng-Fu

2015-05-01

A multiple inputs-driven realistic facial animation system based on 3-D virtual head for human-machine interface is proposed. The system can be driven independently by video, text, and speech, thus can interact with humans through diverse interfaces. The combination of parameterized model and muscular model is used to obtain a tradeoff between computational efficiency and high realism of 3-D facial animation. The online appearance model is used to track 3-D facial motion from video in the framework of particle filtering, and multiple measurements, i.e., pixel color value of input image and Gabor wavelet coefficient of illumination ratio image, are infused to reduce the influence of lighting and person dependence for the construction of online appearance model. The tri-phone model is used to reduce the computational consumption of visual co-articulation in speech synchronized viseme synthesis without sacrificing any performance. The objective and subjective experiments show that the system is suitable for human-machine interaction.

An intelligent human-machine system based on an ecological interface design concept

International Nuclear Information System (INIS)

Naito, N.

1995-01-01

It seems both necessary and promising to develop an intelligent human-machine system, considering the objective of the human-machine system and the recent advance in cognitive engineering and artificial intelligence together with the ever-increasing importance of human factor issues in nuclear power plant operation and maintenance. It should support human operators in their knowledge-based behaviour and allow them to cope with unanticipated abnormal events, including recovery from erroneous human actions. A top-down design approach has been adopted based on cognitive work analysis, and (1) an ecological interface, (2) a cognitive model-based advisor and (3) a robust automatic sequence controller have been established. These functions have been integrated into an experimental control room. A validation test was carried out by the participation of experienced operators and engineers. The results showed the usefulness of this system in supporting the operator's supervisory plant control tasks. ((orig.))

The Pursuit of Chronically Reliable Neural Interfaces: A Materials Perspective.

Science.gov (United States)

Guo, Liang

2016-01-01

Brain-computer interfaces represent one of the most astonishing technologies in our era. However, the grand challenge of chronic instability and limited throughput of the electrode-tissue interface has significantly hindered the further development and ultimate deployment of such exciting technologies. A multidisciplinary research workforce has been called upon to respond to this engineering need. In this paper, I briefly review this multidisciplinary pursuit of chronically reliable neural interfaces from a materials perspective by analyzing the problem, abstracting the engineering principles, and summarizing the corresponding engineering strategies. I further draw my future perspectives by extending the proposed engineering principles.

Using the safety/security interface to the security manager's advantage

International Nuclear Information System (INIS)

Stapleton, B.W.

1993-01-01

Two aspects of the safety/security interface are discussed: (1) the personal safety of nuclear security officers; and (2) how the security manager can effectively deal with the safety/security interface in solving today's requirements yet supporting the overall mission of the facility. The basis of this presentation is the result of interviews, document analyses, and observations. The conclusion is that proper planning and communication between the players involved in the security/safety interface can benefit the two programs and help achieve overall system integration, ultimately contributing to the bottom line. This is especially important in today's cost conscious environment

Development and human factors analysis of an augmented reality interface for multi-robot tele-operation and control

Science.gov (United States)

Lee, Sam; Lucas, Nathan P.; Ellis, R. Darin; Pandya, Abhilash

2012-06-01

This paper presents a seamlessly controlled human multi-robot system comprised of ground and aerial robots of semiautonomous nature for source localization tasks. The system combines augmented reality interfaces capabilities with human supervisor's ability to control multiple robots. The role of this human multi-robot interface is to allow an operator to control groups of heterogeneous robots in real time in a collaborative manner. It used advanced path planning algorithms to ensure obstacles are avoided and that the operators are free for higher-level tasks. Each robot knows the environment and obstacles and can automatically generate a collision-free path to any user-selected target. It displayed sensor information from each individual robot directly on the robot in the video view. In addition, a sensor data fused AR view is displayed which helped the users pin point source information or help the operator with the goals of the mission. The paper studies a preliminary Human Factors evaluation of this system in which several interface conditions are tested for source detection tasks. Results show that the novel Augmented Reality multi-robot control (Point-and-Go and Path Planning) reduced mission completion times compared to the traditional joystick control for target detection missions. Usability tests and operator workload analysis are also investigated.

Search-User Interface Design

CERN Document Server

Wilson, Max

2011-01-01

Search User Interfaces (SUIs) represent the gateway between people who have a task to complete, and the repositories of information and data stored around the world. Not surprisingly, therefore, there are many communities who have a vested interest in the way SUIs are designed. There are people who study how humans search for information, and people who study how humans use computers. There are people who study good user interface design, and people who design aesthetically pleasing user interfaces. There are also people who curate and manage valuable information resources, and people who desi

Ultimate concerns in late modernity: Archer, Bourdieu and reflexivity.

Science.gov (United States)

Farrugia, David; Woodman, Dan

2015-12-01

Through a critique of Margaret Archer's theory of reflexivity, this paper explores the theoretical contribution of a Bourdieusian sociology of the subject for understanding social change. Archer's theory of reflexivity holds that conscious 'internal conversations' are the motor of society, central both to human subjectivity and to the 'reflexive imperative' of late modernity. This is established through critiques of Bourdieu, who is held to erase creativity and meaningful personal investments from subjectivity, and late modernity is depicted as a time when a 'situational logic of opportunity' renders embodied dispositions and the reproduction of symbolic advantages obsolete. Maintaining Archer's focus on 'ultimate concerns' in a context of social change, this paper argues that her theory of reflexivity is established through a narrow misreading and rejection of Bourdieu's work, which ultimately creates problems for her own approach. Archer's rejection of any pre-reflexive dimensions to subjectivity and social action leaves her unable to sociologically explain the genesis of 'ultimate concerns', and creates an empirically dubious narrative of the consequences of social change. Through a focus on Archer's concept of 'fractured reflexivity', the paper explores the theoretical necessity of habitus and illusio for understanding the social changes that Archer is grappling with. In late modernity, reflexivity is valorized just as the conditions for its successful operation are increasingly foreclosed, creating 'fractured reflexivity' emblematic of the complex contemporary interaction between habitus, illusio, and accelerating social change. © London School of Economics and Political Science 2015.

Human Centred Design Considerations for Connected Health Devices for the Older Adult

Directory of Open Access Journals (Sweden)

Richard P. Harte

2014-06-01

Full Text Available Connected health devices are generally designed for unsupervised use, by non-healthcare professionals, facilitating independent control of the individuals own healthcare. Older adults are major users of such devices and are a population significantly increasing in size. This group presents challenges due to the wide spectrum of capabilities and attitudes towards technology. The fit between capabilities of the user and demands of the device can be optimised in a process called Human Centred Design. Here we review examples of some connected health devices chosen by random selection, assess older adult known capabilities and attitudes and finally make analytical recommendations for design approaches and design specifications.

A novel human-machine interface based on recognition of multi-channel facial bioelectric signals

International Nuclear Information System (INIS)

Razazadeh, Iman Mohammad; Firoozabadi, S. Mohammad; Golpayegani, S.M.R.H.; Hu, H.

2011-01-01

Full text: This paper presents a novel human-machine interface for disabled people to interact with assistive systems for a better quality of life. It is based on multichannel forehead bioelectric signals acquired by placing three pairs of electrodes (physical channels) on the Fron-tails and Temporalis facial muscles. The acquired signals are passes through a parallel filter bank to explore three different sub-bands related to facial electromyogram, electrooculogram and electroencephalogram. The root mean features of the bioelectric signals analyzed within non-overlapping 256 ms windows were extracted. The subtractive fuzzy c-means clustering method (SFCM) was applied to segment the feature space and generate initial fuzzy based Takagi-Sugeno rules. Then, an adaptive neuro-fuzzy inference system is exploited to tune up the premises and consequence parameters of the extracted SFCMs. rules. The average classifier discriminating ratio for eight different facial gestures (smiling, frowning, pulling up left/right lips corner, eye movement to left/right/up/down is between 93.04% and 96.99% according to different combinations and fusions of logical features. Experimental results show that the proposed interface has a high degree of accuracy and robustness for discrimination of 8 fundamental facial gestures. Some potential and further capabilities of our approach in human-machine interfaces are also discussed. (author)

Ecological Interface Design

DEFF Research Database (Denmark)

Vicente, Kim J.; Rasmussen, Jens

1992-01-01

A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing...

When Triple Helix Unravels: A Multi-Case Analysis of Failures in Industry-University Cooperative Research Centres

Science.gov (United States)

Gray, Denis; Sundstrom, Eric; Tornatzky, Louis G.; McGowen, Lindsey

2011-01-01

Cooperative research centres (CRCs) increasingly foster Triple Helix (industry-university-government) collaboration and represent significant vehicles for cooperation across sectors, the promotion of knowledge and technology transfer and ultimately the acceleration of innovation. A growing social science literature on CRCs focuses on their…

Personalized keystroke dynamics for self-powered human--machine interfacing.

Science.gov (United States)

Chen, Jun; Zhu, Guang; Yang, Jin; Jing, Qingshen; Bai, Peng; Yang, Weiqing; Qi, Xuewei; Su, Yuanjie; Wang, Zhong Lin

2015-01-27

The computer keyboard is one of the most common, reliable, accessible, and effective tools used for human--machine interfacing and information exchange. Although keyboards have been used for hundreds of years for advancing human civilization, studying human behavior by keystroke dynamics using smart keyboards remains a great challenge. Here we report a self-powered, non-mechanical-punching keyboard enabled by contact electrification between human fingers and keys, which converts mechanical stimuli applied to the keyboard into local electronic signals without applying an external power. The intelligent keyboard (IKB) can not only sensitively trigger a wireless alarm system once gentle finger tapping occurs but also trace and record typed content by detecting both the dynamic time intervals between and during the inputting of letters and the force used for each typing action. Such features hold promise for its use as a smart security system that can realize detection, alert, recording, and identification. Moreover, the IKB is able to identify personal characteristics from different individuals, assisted by the behavioral biometric of keystroke dynamics. Furthermore, the IKB can effectively harness typing motions for electricity to charge commercial electronics at arbitrary typing speeds greater than 100 characters per min. Given the above features, the IKB can be potentially applied not only to self-powered electronics but also to artificial intelligence, cyber security, and computer or network access control.

The ultimate intrinsic signal-to-noise ratio of loop- and dipole-like current patterns in a realistic human head model.

Science.gov (United States)

Pfrommer, Andreas; Henning, Anke

2018-03-13

The ultimate intrinsic signal-to-noise ratio (UISNR) represents an upper bound for the achievable SNR of any receive coil. To reach this threshold a complete basis set of equivalent surface currents is required. This study systematically investigated to what extent either loop- or dipole-like current patterns are able to reach the UISNR threshold in a realistic human head model between 1.5 T and 11.7 T. Based on this analysis, we derived guidelines for coil designers to choose the best array element at a given field strength. Moreover, we present ideal current patterns yielding the UISNR in a realistic body model. We distributed generic current patterns on a cylindrical and helmet-shaped surface around a realistic human head model. We excited electromagnetic fields in the human head by using eigenfunctions of the spherical and cylindrical Helmholtz operator. The electromagnetic field problem was solved by a fast volume integral equation solver. At 7 T and above, adding curl-free current patterns to divergence-free current patterns substantially increased the SNR in the human head (locally >20%). This was true for the helmet-shaped and the cylindrical surface. On the cylindrical surface, dipole-like current patterns had high SNR performance in central regions at ultra-high field strength. The UISNR increased superlinearly with B0 in most parts of the cerebrum but only sublinearly in the periphery of the human head. The combination of loop and dipole elements could enhance the SNR performance in the human head at ultra-high field strength. © 2018 International Society for Magnetic Resonance in Medicine.

New concepts of control centre design and development

International Nuclear Information System (INIS)

Dittmar, E.; Kiersch, J.J.; Schmudlach, U.; Weihrauch, J.

1977-02-01

The concept of modern control centre technology is shown, its realization at project including the supervision of an electric power distribution system is described. A modern control centre is characterized by the fact that the conventional control elements are more and more replaced by elements of computer technology, i.e. computer and displays. The different functions implemented by hard- and software set new standards relative to flexibility, adaptability, dimensioning. The communication interface man/process is defined and designed in a new way allowing dynamic and more efficent supervisionstrategy of technical processes via display in different operation modes. Special attention is paid to adjustments and extensions of process elements and their integration into the supervised network. (orig./WB) [de

Development of effective tool for iterative design of human machine interfaces in nuclear power plant

International Nuclear Information System (INIS)

Nakagawa, Takashi; Matsuo, Satoko; Yoshikawa, Hidekazu; Wu, Wei; Kameda, Akiyuki; Fumizawa, Motoo

2000-01-01

The authors have developed SEAMAID, which is a Simulation-based Evaluation and Analysis support system for MAn-machine Interface Design (SEAMAID) in the domain of nuclear power plants. The SEAMAID simulated the interaction between an operator and human machine interfaces (HMI), and supports to evaluate the HMI by using the simulation results. In this paper, a case study of evaluation for conventional center control room design was conducted. The authors were confirmed that SEAMAID is a useful tool for improvements of HMI design (J.P.N.)

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

Science.gov (United States)

2005-01-01

This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

Controlling a virtual forehand prosthesis using an adaptive and affective Human-Machine Interface.

Science.gov (United States)

Rezazadeh, I Mohammad; Firoozabadi, S M P; Golpayegani, S M R Hashemi; Hu, H

2011-01-01

This paper presents the design of an adaptable Human-Machine Interface (HMI) for controlling virtual forearm prosthesis. Direct physical performance measures (obtained score and completion time) for the requested tasks were calculated. Furthermore, bioelectric signals from the forehead were recorded using one pair of electrodes placed on the frontal region of the subject head to extract the mental (affective) measures while performing the tasks. By employing the proposed algorithm and above measures, the proposed HMI can adapt itself to the subject's mental states, thus improving the usability of the interface. The quantitative results from 15 subjects show that the proposed HMI achieved better physical performance measures in comparison to a conventional non-adaptive myoelectric controller (p < 0.001).

Adaptive user interfaces

CERN Document Server

1990-01-01

This book describes techniques for designing and building adaptive user interfaces developed in the large AID project undertaken by the contributors.Key Features* Describes one of the few large-scale adaptive interface projects in the world* Outlines the principles of adaptivity in human-computer interaction

Designing end-user interfaces

CERN Document Server

Heaton, N

1988-01-01

Designing End-User Interfaces: State of the Art Report focuses on the field of human/computer interaction (HCI) that reviews the design of end-user interfaces.This compilation is divided into two parts. Part I examines specific aspects of the problem in HCI that range from basic definitions of the problem, evaluation of how to look at the problem domain, and fundamental work aimed at introducing human factors into all aspects of the design cycle. Part II consists of six main topics-definition of the problem, psychological and social factors, principles of interface design, computer intelligenc

Operating Comfort Prediction Model of Human-Machine Interface Layout for Cabin Based on GEP

Directory of Open Access Journals (Sweden)

Li Deng

2015-01-01

Full Text Available In view of the evaluation and decision-making problem of human-machine interface layout design for cabin, the operating comfort prediction model is proposed based on GEP (Gene Expression Programming, using operating comfort to evaluate layout scheme. Through joint angles to describe operating posture of upper limb, the joint angles are taken as independent variables to establish the comfort model of operating posture. Factor analysis is adopted to decrease the variable dimension; the model’s input variables are reduced from 16 joint angles to 4 comfort impact factors, and the output variable is operating comfort score. The Chinese virtual human body model is built by CATIA software, which will be used to simulate and evaluate the operators’ operating comfort. With 22 groups of evaluation data as training sample and validation sample, GEP algorithm is used to obtain the best fitting function between the joint angles and the operating comfort; then, operating comfort can be predicted quantitatively. The operating comfort prediction result of human-machine interface layout of driller control room shows that operating comfort prediction model based on GEP is fast and efficient, it has good prediction effect, and it can improve the design efficiency.

Operating Comfort Prediction Model of Human-Machine Interface Layout for Cabin Based on GEP.

Science.gov (United States)

Deng, Li; Wang, Guohua; Chen, Bo

2015-01-01

In view of the evaluation and decision-making problem of human-machine interface layout design for cabin, the operating comfort prediction model is proposed based on GEP (Gene Expression Programming), using operating comfort to evaluate layout scheme. Through joint angles to describe operating posture of upper limb, the joint angles are taken as independent variables to establish the comfort model of operating posture. Factor analysis is adopted to decrease the variable dimension; the model's input variables are reduced from 16 joint angles to 4 comfort impact factors, and the output variable is operating comfort score. The Chinese virtual human body model is built by CATIA software, which will be used to simulate and evaluate the operators' operating comfort. With 22 groups of evaluation data as training sample and validation sample, GEP algorithm is used to obtain the best fitting function between the joint angles and the operating comfort; then, operating comfort can be predicted quantitatively. The operating comfort prediction result of human-machine interface layout of driller control room shows that operating comfort prediction model based on GEP is fast and efficient, it has good prediction effect, and it can improve the design efficiency.

More playful user interfaces: interfaces that invite social and physical interaction

NARCIS (Netherlands)

Nijholt, Antinus; Unknown, [Unknown

2015-01-01

This book covers the latest advances in playful user interfaces – interfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

Applying Spatial Audio to Human Interfaces: 25 Years of NASA Experience

Science.gov (United States)

Begault, Durand R.; Wenzel, Elizabeth M.; Godfrey, Martine; Miller, Joel D.; Anderson, Mark R.

2010-01-01

From the perspective of human factors engineering, the inclusion of spatial audio within a human-machine interface is advantageous from several perspectives. Demonstrated benefits include the ability to monitor multiple streams of speech and non-speech warning tones using a cocktail party advantage, and for aurally-guided visual search. Other potential benefits include the spatial coordination and interaction of multimodal events, and evaluation of new communication technologies and alerting systems using virtual simulation. Many of these technologies were developed at NASA Ames Research Center, beginning in 1985. This paper reviews examples and describes the advantages of spatial sound in NASA-related technologies, including space operations, aeronautics, and search and rescue. The work has involved hardware and software development as well as basic and applied research.

Experimental Study on Bond Behavior of FRP-Concrete Interface in Hygrothermal Environment

Directory of Open Access Journals (Sweden)

X. H. Zheng

2016-01-01

Full Text Available As the technique of fiber-reinforced polymer (FRP composite material strengthened reinforced concrete structures is widely used in the field of civil engineering, durability of the strengthened structures has attracted more attention in recent years. Hygrothermal environment has an adverse effect on the bond behavior of the interface between FRP and concrete. This paper focuses on the bond durability of carbon fiber laminate- (CFL- concrete interface in hygrothermal condition which simulates the climate characteristic in South China. Twenty 100 mm × 100 mm × 720 mm specimens were divided into 6 groups based on different temperature and humidity. After pretreatment in hygrothermal environment, the specimens were tested using double shear method. Strain gauges bonded along the CFL surface and linear variation displacement transducers (LVDTs were used to measure longitudinal strains and slip of the interface. Failure mode, ultimate capacity, load-deflection relationship, and relative slip were analyzed. The bond behavior of FRP-concrete interface under hygrothermal environment was studied. Results show that the ultimate bearing capacity of the interface reduced after exposure to hygrothermal environments. The decreasing ranges were up to 27.9% after exposure at high temperature and humidity (60°C, 95% RH. The maximum strains (εmax of the specimens pretreated decreased obviously which indicated decay of the bond behavior after exposure to the hygrothermal environment.

The Australian centre for RF bioeffects research (ACRBR) - an NHMRC centre of research excellence

International Nuclear Information System (INIS)

Wood, A.; Croft, R.; Abramson, M.; Anderson, V.; Cosic, I.; Finnie, J.; McKenzie, R.

2004-01-01

Full text: The Australian Centre for Radiofrequency Bioeffects Research (ACRBR) is a newly established multi-institutional research centre which seeks to research questions pertaining to possible health effects of exposure to radiofrequency devices, such as mobile phones and which is funded under the Australian National Health and Medical Research Council (NHMRC) Centres of Research Excellence funding program. The Centre of Research Excellence in Electromagnetic Energy is combining the efforts of engineers, epidemiologists, physicists, psychophysiologists and veterinary pathologists from RMIT University, the Institute of Medical and Veterinary Science in South Australia (IMVS), Monash University, Swinburne University of Technology and Telstra Research Laboratories (TRL). The centre is funded at $2.5 M over five years and will undertake a program of research to address the issue of exposure to radiofrequency (RF) devices and health. It will also train new scientists, keep the community informed of ongoing developments and help the development of government policies in this area of considerable public concern. The 5-year program has the following components: Neurobiology: One important area where there is a perceived research gap is in the area of potential neurological effects, which will hence be a major focus of this Centre. The proposed studies range from in vitro and in vivo research studies of RF effects on neuron and neural system functioning in rodents, to that of RF effects on simple neural function, cognition and subjective report in humans. The latter series of studies have been developed to account for the consensus view that more emphasis needs to be placed on possible differences in RF population sensitivity (e.g. youth versus aged, and ' electromagnetic hypersensitives'). Epidemiological studies are an important tool in studying the impact on public health from exposure of whole populations to modern radio technologies. Cancer outcomes in this area of

A Tool for Assessing the Text Legibility of Digital Human Machine Interfaces

Energy Technology Data Exchange (ETDEWEB)

Roger Lew; Ronald L. Boring; Thomas A. Ulrich

2015-08-01

A tool intended to aid qualified professionals in the assessment of the legibility of text presented on a digital display is described. The assessment of legibility is primarily for the purposes of designing and analyzing human machine interfaces in accordance with NUREG-0700 and MIL-STD 1472G. The tool addresses shortcomings of existing guidelines by providing more accurate metrics of text legibility with greater sensitivity to design alternatives.

[Study on the interface of human hepatocyte/micropore polypropylene ultrafiltration membrane].

Science.gov (United States)

Peng, Cheng-Hong; Han, Bao-San; Gao, Chang-You; Ma, Zu-Wei; Zhao, Zhi-Ming; Wang, Yong; Liu, Hong; Zhang, Gui-di; Yang, Mei-Juan

2004-09-02

To found a new interface of human hepatocyte/micropore polypropylene ultrafiltration membrane (MPP) with good cytocompatibility so as to construct bioartificial bioreactor with polypropylene hollow fibers in future. MPP ultrafiltration membrane underwent chemical grafting modification through ultraviolet irradiation and Fe(2+) reduction. The contact angles of MPP and the modified MPP membranes were measured. Human hepatic cells L-02 were cultured. MPP and modified MPP membranes were spread on the wells of culture plate and human hepatic cells and cytodex 3 were inoculated on them. Different kinds of microscopy were used to observe the morphology of these cells. The water contact angle of MPP and the modified MPP membranes decreased from 78 degrees +/- 5 degrees to 27 degrees +/- 4 degrees (P < 0.05), which indicated that the hydrophilicity of the membrane was improved obviously after the grafting modification. Human hepatocyte L-02 did not adhere to and spread on the modified MPP membrane surface, and only grew on the microcarrier cytodex 3 with higher density and higher proliferation ratio measured by MTT. Grafting modification of acrylamide on MPP membrane is a good method to improve the human hepatocyte cytocompatibility with MPP ultrafiltration membrane.

Human reliability analysis in the man-machine interface design review

International Nuclear Information System (INIS)

Kim, I.S.

2001-01-01

Advanced, computer-based man-machine interface (MMI) is emerging as part of the new design of nuclear power plants. The impact of advanced MMI on the operator performance, and as a result, on plant safety should be thoroughly evaluated before such technology is actually adopted in the plants. This paper discusses the applicability of human reliability analysis (HRA) to support the design review process. Both the first-generation and the second-generation HRA methods are considered focusing on a couple of promising HRA methods, i.e. ATHEANA and CREAM, with the potential to assist the design review process

The French centralized low level radwaste treatment centre named CENTRACO

International Nuclear Information System (INIS)

Barnes, C.; Sixou, Y.

1996-01-01

Socodei, a subsidiary company of EdF and Cogema is commissioned to design, finance, build and operate two low level radwaste treatment facilities: a contaminated scrap metal melting unit, and a solid and liquid waste incinerator. These units frame a low level radwaste treatment centre named Centraco, located near Marcoule in the south of France, and will receive in 1998 waste coming from dismantling, maintenance and operating works of French and foreign nuclear sites. The decision to create this centre is due to the low density and large variety of low level radwaste which take a volume out of proportion with their activity, specially in the surface storage centre. Up to now, all low level radwaste were sent and stored with no treatment optimization in surface storage centres. Socodei proposes in one single site, to optimize low level radwaste management and reduce the volume of ultimate waste to be stored: in a ratio of one to ten by casting ingots coming from melting contaminated scrap metals; in a ratio of one to twenty by encapsulating earth ashes and ashes resulting from incineration of solid and liquid waste. This is a centralized treatment centre and that's why Centraco is a new waste management system. Getting together all means in one place reduces costs, avoids mismanagement and risk increase, and allows consistency in safety, environmental impact, transport and personnel radioprotection. (author)

Practical speech user interface design

CERN Document Server

Lewis, James R

2010-01-01

Although speech is the most natural form of communication between humans, most people find using speech to communicate with machines anything but natural. Drawing from psychology, human-computer interaction, linguistics, and communication theory, Practical Speech User Interface Design provides a comprehensive yet concise survey of practical speech user interface (SUI) design. It offers practice-based and research-based guidance on how to design effective, efficient, and pleasant speech applications that people can really use. Focusing on the design of speech user interfaces for IVR application

Patient centred medicine: reason, emotion, and human spirit? Some philosophical reflections on being with patients.

Science.gov (United States)

Evans, R G

2003-06-01

The ideal of patient centred medicine remains only partially realised. Within modern Western society, the highly individualistic culture and religious decline linked with medicine's reluctance to relinquish an outmoded form of scientific rationalism can act as reductive influences, stifling conceptual development. Some examples of the recent literature on communication skills in medicine are analysed to discern the underlying philosophy. A rationalist stance invites an examination of the possible nature of rationality. Another example accepts the need to accommodate the emotional and the unconscious. Issues of human suffering with an inherent spiritual dimension seem to remain excluded. The need to move beyond a duality of reason and emotion to embrace the existential and spiritual is suggested as a theoretical prerequisite for developing a more inclusive concept of patient centred medicine, which only then may be realised. Some brief examples are considered of the sort of notions and types of discourse that might effectively inform "teaching" of communication skills.

Ultimate - a new generation of gasoline and diesel fuels; Ultimate - eine neue Generation von Otto- und Dieselkraftstoffen

Energy Technology Data Exchange (ETDEWEB)

Strempel, G. [Aral Forschung/Global Fuels Technology, Bochum (Germany); Beckwith, P. [BP Fuels Management Group, Pangbourne (United Kingdom); Froehling, J. [Aral Forschung, Bochum (Germany). Labor/Analytik; Baron, U. [Aral Forschung, Bochum (Germany). Motor- und Fahrzeuglaboratorium; Sauermann, P.; Balfanz, U. [Aral Forschung, Bochum (Germany). Produktentwicklung; Doermer, W. [Aral Forschung, Bochum (Germany). Produktqualitaet

2005-06-01

With the launch of Ultimate 100 gasoline and Ultimate Diesel, motorists in Germany now have the opportunity to choose new advanced performance fuels designed to get the very best from their engines. This article gives details of the technical development behind these fuels, their wide range of benefits, and how it is possible to manufacture fuels which meet the considerable technical challenge of achieving both more performance and less pollution. (orig.)

User experience in libraries applying ethnography and human-centred design

CERN Document Server

Borg, Matt

2016-01-01

Modern library services can be incredibly complex. Much more so than their forebears, modern librarians must grapple daily with questions of how best to implement innovative new services, while also maintaining and updating the old. The efforts undertaken are immense, but how best to evaluate their success? In this groundbreaking new book from Routledge, library practitioners, anthropologists, and design experts combine to advocate a new focus on User Experience (or UX ) research methods. Through a combination of theoretical discussion and applied case studies, they argue that this ethnographic and human-centred design approach enables library professionals to gather rich evidence-based insights into what is really going on in their libraries, allowing them to look beyond what library users say they do to what they actually do. Edited by the team behind the international UX in Libraries conference, "User Experience in Libraries" will ignite new interest in a rapidly emerging and game-changing area of resear...

A truly human interface: Interacting face-to-face with someone whose words are determined by a computer program

Directory of Open Access Journals (Sweden)

Kevin eCorti

2015-05-01

Full Text Available We use speech shadowing to create situations wherein people converse in person with a human whose words are determined by a conversational agent computer program. Speech shadowing involves a person (the shadower repeating vocal stimuli originating from a separate communication source in real-time. Humans shadowing for conversational agent sources (e.g., chat bots become hybrid agents (echoborgs capable of face-to-face interlocution. We report three studies that investigated people’s experiences interacting with echoborgs and the extent to which echoborgs pass as autonomous humans. First, participants in a Turing Test spoke with a chat bot via either a text interface or an echoborg. Human shadowing did not improve the chat bot’s chance of passing but did increase interrogators’ ratings of how human-like the chat bot seemed. In our second study, participants had to decide whether their interlocutor produced words generated by a chat bot or simply pretended to be one. Compared to those who engaged a text interface, participants who engaged an echoborg were more likely to perceive their interlocutor as pretending to be a chat bot. In our third study, participants were naïve to the fact that their interlocutor produced words generated by a chat bot. Unlike those who engaged a text interface, the vast majority of participants who engaged an echoborg neither sensed nor suspected a robotic interaction. These findings have implications for android science, the Turing Test paradigm, and human-computer interaction. The human body, as the delivery mechanism of communication, fundamentally alters the social psychological dynamics of interactions with machine intelligence.

A Human Machine Interface for EVA

Science.gov (United States)

Hartmann, L.

EVA astronauts work in a challenging environment that includes high rate of muscle fatigue, haptic and proprioception impairment, lack of dexterity and interaction with robotic equipment. Currently they are heavily dependent on support from on-board crew and ground station staff for information and robotics operation. They are limited to the operation of simple controls on the suit exterior and external robot controls that are difficult to operate because of the heavy gloves that are part of the EVA suit. A wearable human machine interface (HMI) inside the suit provides a powerful alternative for robot teleoperation, procedure checklist access, generic equipment operation via virtual control panels and general information retrieval and presentation. The HMI proposed here includes speech input and output, a simple 6 degree of freedom (dof) pointing device and a heads up display (HUD). The essential characteristic of this interface is that it offers an alternative to the standard keyboard and mouse interface of a desktop computer. The astronaut's speech is used as input to command mode changes, execute arbitrary computer commands and generate text. The HMI can respond with speech also in order to confirm selections, provide status and feedback and present text output. A candidate 6 dof pointing device is Measurand's Shapetape, a flexible "tape" substrate to which is attached an optic fiber with embedded sensors. Measurement of the modulation of the light passing through the fiber can be used to compute the shape of the tape and, in particular, the position and orientation of the end of the Shapetape. It can be used to provide any kind of 3d geometric information including robot teleoperation control. The HUD can overlay graphical information onto the astronaut's visual field including robot joint torques, end effector configuration, procedure checklists and virtual control panels. With suitable tracking information about the position and orientation of the EVA suit

Geophysical characterisation of the groundwater-surface water interface

Science.gov (United States)

McLachlan, P. J.; Chambers, J. E.; Uhlemann, S. S.; Binley, A.

2017-11-01

Interactions between groundwater (GW) and surface water (SW) have important implications for water quantity, water quality, and ecological health. The subsurface region proximal to SW bodies, the GW-SW interface, is crucial as it actively regulates the transfer of nutrients, contaminants, and water between GW systems and SW environments. However, geological, hydrological, and biogeochemical heterogeneity in the GW-SW interface makes it difficult to characterise with direct observations. Over the past two decades geophysics has been increasingly used to characterise spatial and temporal variability throughout the GW-SW interface. Geophysics is a powerful tool in evaluating structural heterogeneity, revealing zones of GW discharge, and monitoring hydrological processes. Geophysics should be used alongside traditional hydrological and biogeochemical methods to provide additional information about the subsurface. Further integration of commonly used geophysical techniques, and adoption of emerging techniques, has the potential to improve understanding of the properties and processes of the GW-SW interface, and ultimately the implications for water quality and environmental health.

Taking account of human factors for interface assessment and design in monitoring automated systems

International Nuclear Information System (INIS)

Musso, J.-F.; Sicard, Y.; Martin, M.

1990-01-01

Optimum balance between control means and the operator capacities is sought for to achieve computerization of Man-Machine interfaces. Observation of the diagnosis activity of populations of operators in situation on simulators enables design criteria to be defined which are well-suited to the characteristics of the tasks with which they are confronted. This observation provides an assessment of the interfaces from the standpoint of the graphic layer, of the Human behaviour induced by the Machine and of the nature of the interaction between these two systems. This requires an original approach dialectically involving cognitive psychology, dynamic management of the knowledge bases (artificial intelligence) in a critical industrial control and monitoring application. (author)

Bioinformatics meets user-centred design: a perspective.

Directory of Open Access Journals (Sweden)

Katrina Pavelin

Full Text Available Designers have a saying that "the joy of an early release lasts but a short time. The bitterness of an unusable system lasts for years." It is indeed disappointing to discover that your data resources are not being used to their full potential. Not only have you invested your time, effort, and research grant on the project, but you may face costly redesigns if you want to improve the system later. This scenario would be less likely if the product was designed to provide users with exactly what they need, so that it is fit for purpose before its launch. We work at EMBL-European Bioinformatics Institute (EMBL-EBI, and we consult extensively with life science researchers to find out what they need from biological data resources. We have found that although users believe that the bioinformatics community is providing accurate and valuable data, they often find the interfaces to these resources tricky to use and navigate. We believe that if you can find out what your users want even before you create the first mock-up of a system, the final product will provide a better user experience. This would encourage more people to use the resource and they would have greater access to the data, which could ultimately lead to more scientific discoveries. In this paper, we explore the need for a user-centred design (UCD strategy when designing bioinformatics resources and illustrate this with examples from our work at EMBL-EBI. Our aim is to introduce the reader to how selected UCD techniques may be successfully applied to software design for bioinformatics.

An Architectural Experience for Interface Design

Science.gov (United States)

Gong, Susan P.

2016-01-01

The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

Developing Human-Computer Interface Models and Representation Techniques(Dialogue Management as an Integral Part of Software Engineering)

OpenAIRE

Hartson, H. Rex; Hix, Deborah; Kraly, Thomas M.

1987-01-01

The Dialogue Management Project at Virginia Tech is studying the poorly understood problem of human-computer dialogue development. This problem often leads to low usability in human-computer dialogues. The Dialogue Management Project approaches solutions to low usability in interfaces by addressing human-computer dialogue development as an integral and equal part of the total system development process. This project consists of two rather distinct, but dependent, parts. One is development of ...

THE ULTIMATE STATE CONCEPT APPLIED TO TUNNEL SUPPORT

Directory of Open Access Journals (Sweden)

Mladen Hudec

2000-12-01

Full Text Available The most questionable are the values of pressures between rock and support resulting from common deformations on the contact area between rock and support. Therefore the modelling and design of the tunnel support is not reliable, if it is based on active rock pressure resulting from this common deformations. The inversion of the design procedure is proposed. Instead of the active extreme pressure of the rock on support, the influence of ultimate reaction of the support on the rock has to be analysed. This procedure can be performed using the ultimate load principle, as proposed by Eurocodc 7 (Geotechnies. Normally, the rock has the tendency to increase the common conver¬gence until the support reaches its ultimate state. So, loading of profile boundary with the ultimate possible reaction of the support is very plausible. The reactive support pressures have to be probable and itself in equilibrium. The ultimate reactive load has to be reduced by Euro-code safety factor for structural elements and applied on the rock with given properties, or alternatively (as proposed by Eurocode 7 the soil or rock properties have to be diminished and calculated with full ultimate support pressures. If the rock with given (or proposed pro¬perties and loaded with ultimate reactive pressures resulting from supposed support, satisfy its failure criterion, then is the compound system support-rock verificatcd. By this procedure, the number of relevant material properties is reduce to the primary stress ratio and the constants defining the failure criterion. The verification can be performed by any of numerical methods, but we prefer here used boundary elements method (the paper is published in Croatian.

Rab11 family expression in the human placenta: Localization at the maternal-fetal interface

Science.gov (United States)

Artemiuk, Patrycja A.; Hanscom, Sara R.; Lindsay, Andrew J.; Wuebbolt, Danielle; Breathnach, Fionnuala M.; Tully, Elizabeth C.; Khan, Amir R.; McCaffrey, Mary W.

2017-01-01

Rab proteins are a family of small GTPases involved in a variety of cellular processes. The Rab11 subfamily in particular directs key steps of intracellular functions involving vesicle trafficking of the endosomal recycling pathway. This Rab subfamily works through a series of effector proteins including the Rab11-FIPs (Rab11 Family-Interacting Proteins). While the Rab11 subfamily has been well characterized at the cellular level, its function within human organ systems is still being explored. In an effort to further study these proteins, we conducted a preliminary investigation of a subgroup of endosomal Rab proteins in a range of human cell lines by Western blotting. The results from this analysis indicated that Rab11a, Rab11c(Rab25) and Rab14 were expressed in a wide range of cell lines, including the human placental trophoblastic BeWo cell line. These findings encouraged us to further analyse the localization of these Rabs and their common effector protein, the Rab Coupling Protein (RCP), by immunofluorescence microscopy and to extend this work to normal human placental tissue. The placenta is a highly active exchange interface, facilitating transfer between mother and fetus during pregnancy. As Rab11 proteins are closely involved in transcytosis we hypothesized that the placenta would be an interesting human tissue model system for Rab investigation. By immunofluorescence microscopy, Rab11a, Rab11c(Rab25), Rab14 as well as their common FIP effector RCP showed prominent expression in the placental cell lines. We also identified the expression of these proteins in human placental lysates by Western blot analysis. Further, via fluorescent immunohistochemistry, we noted abundant localization of these proteins within key functional areas of primary human placental tissues, namely the outer syncytial layer of placental villous tissue and the endothelia of fetal blood vessels. Overall these findings highlight the expression of the Rab11 family within the human

Control system oriented human interface

International Nuclear Information System (INIS)

Barale, P.; Jacobson, V.; Kilgore, R.; Rondeau, D.

1976-11-01

The on-line control system interface for magnet beam steering and focusing in the Bevalac is described. An Aydin model 5205B display generator was chosen. This display generator will allow the computer to completely rewrite a monitor screen in less than 50 ms and is also capable of controlling a color monitor

Ultimate disposal of radioactive wastes

International Nuclear Information System (INIS)

Roethemeyer, H.

1991-01-01

The activities developed by the Federal Institution of Physical Engineering PTB and by the Federal Office for Radiation Protection (BfS) concentrated, among others, on work to implement ultimate storage facilities for radioactive wastes. The book illuminates this development from site designation to the preliminary evaluation of the Gorleben salt dome, to the preparation of planning documents proving that the Konrad ore mine is suitable for a repository. The paper shows the legal provisions involved; research and development tasks; collection of radioactive wastes ready for ultimate disposal; safety analysis in the commissioning and post-operational stages, and product control. The historical development of waste management in the Federal Republic of Germany and international cooperation in this area are outlined. (DG) [de

The foundation of NCVD PCI Registry: the Malaysia's first multi-centre interventional cardiology project.

Science.gov (United States)

Liew, H B; Rosli, M A; Wan Azman, W A; Robaayah, Z; Sim, K H

2008-09-01

The National Cardiovascular Database for Percutaneous Coronary Intervention (NCVD PCI) Registry is the first multicentre interventional cardiology project, involving the main cardiac centres in the country. The ultimate goal of NCVD PCI is to provide a contemporary appraisal of PCI in Malaysia. This article introduces the foundation, the aims, methodology, database collection and preliminary results of the first six-month database.

President | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

International Development Research Centre Selection Criteria Education A ... or an acceptable combination of education, job-related training and/or experience. ... Knowledge of current corporate governance and human resource issues; ...

Human Factors Guidance for Control Room and Digital Human-System Interface Design and Modification, Guidelines for Planning, Specification, Design, Licensing, Implementation, Training, Operation and Maintenance

Energy Technology Data Exchange (ETDEWEB)

R. Fink, D. Hill, J. O' Hara

2004-11-30

Nuclear plant operators face a significant challenge designing and modifying control rooms. This report provides guidance on planning, designing, implementing and operating modernized control rooms and digital human-system interfaces.

Human Factors Guidance for Control Room and Digital Human-System Interface Design and Modification. Guidelines for Planning, Specification, Design, Licensing, Implementation, Training, Operation and Maintenance

International Nuclear Information System (INIS)

Fink, R.; Hill, D.; O'Hara, J.

2004-01-01

Nuclear plant operators face a significant challenge designing and modifying control rooms. This report provides guidance on planning, designing, implementing and operating modernized control rooms and digital human-system interfaces

PC-AT to gamma camera interface ANUGAMI-S

International Nuclear Information System (INIS)

Bhattacharya, Sadhana; Gopalakrishnan, K.R.

1997-01-01

PC-AT to gamma camera interface is an image acquisition system used in nuclear medicine centres and hospitals. The interface hardware and acquisition software have been designed and developed to meet most of the routine clinical applications using gamma camera. The state of the art design of the interface provides quality improvement in addition to image acquisition, by applying on-line uniformity correction which is very essential for gamma camera applications in nuclear medicine. The improvement in the quality of the image has been achieved by image acquisition in positionally varying and sliding energy window. It supports all acquisition modes viz. static, dynamic and gated acquisition modes with and without uniformity correction. The user interface provides the acquisition in various user selectable frame sizes, orientation and colour palettes. A complete emulation of camera console has been provided along with persistence scope and acquisition parameter display. It is a universal system which provides a modern, cost effective and easily maintainable solution for interfacing any gamma camera to PC or upgradation of analog gamma camera. (author). 4 refs., 3 figs

Applying Cognitive Psychology to User Interfaces

Science.gov (United States)

Durrani, Sabeen; Durrani, Qaiser S.

This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

More playful user interfaces interfaces that invite social and physical interaction

CERN Document Server

2015-01-01

This book covers the latest advances in playful user interfaces – interfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing cost of sensor and actuator technology makes it possible to integrate physical behavior information in human-computer interactions. This leads to many new entertainment and game applications that allow or require social and physical interaction in sensor- and actuator-equipped smart environments. The topics discussed include: human-nature interaction, human-animal interaction and the interaction with tangibles that are naturally integrated in our smart environments. Digitally supported remote audience participation in artistic or sport events is also discussed. One important theme that emerges throughout the book is the involvement of users in the digital-entertainment design process or even design and implement...

Interface of data transmission for a transcutaneous communication system using the human body as transmission medium.

Science.gov (United States)

Okamoto, Eiji; Kato, Yoshikuni; Seino, Kazuyuki; Mitamura, Yoshinori

2012-03-01

We have been developing a new transcutaneous communication system (TCS) that uses the human body as an electrical conductive medium. We studied an interface circuit of the TCS in order to optimize the leading data current into the human body effectively. Two types of LC circuits were examined for the interface circuit, one was an LC series-parallel circuit, and the other was a parallel-connected LC circuit. The LC series-parallel circuit connected to the body could be tuned to a resonant frequency, and the frequency was determined by the values of an external inductor and an external capacitor. Permittivity of the body did not influence the electrical resonance. Connection of the LC series-parallel circuit to the body degraded the quality factor Q because of the conductivity of the body. However, the LC parallel-connected circuit when connected to the body did not indicate electrical resonance. The LC series-parallel circuit restricts a direct current and a low-frequency current to flow into the body; thus, it can prevent a patient from getting a shock. According to the above results, an LC series-parallel circuit is an optimum interface circuit between the TCS and the body for leading data current into the body effectively and safely.

An EOG-Based Human-Machine Interface for Wheelchair Control.

Science.gov (United States)

Huang, Qiyun; He, Shenghong; Wang, Qihong; Gu, Zhenghui; Peng, Nengneng; Li, Kai; Zhang, Yuandong; Shao, Ming; Li, Yuanqing

2017-07-27

Non-manual human-machine interfaces (HMIs) have been studied for wheelchair control with the aim of helping severely paralyzed individuals regain some mobility. The challenge is to rapidly, accurately and sufficiently produce control commands, such as left and right turns, forward and backward motions, acceleration, deceleration, and stopping. In this paper, a novel electrooculogram (EOG)-based HMI is proposed for wheelchair control. Thirteen flashing buttons are presented in the graphical user interface (GUI), and each of the buttons corresponds to a command. These buttons flash on a one-by-one manner in a pre-defined sequence. The user can select a button by blinking in sync with its flashes. The algorithm detects the eye blinks from a channel of vertical EOG data and determines the user's target button based on the synchronization between the detected blinks and the button's flashes. For healthy subjects/patients with spinal cord injuries (SCIs), the proposed HMI achieved an average accuracy of 96.7%/91.7% and a response time of 3.53 s/3.67 s with 0 false positive rates (FPRs). Using only one channel of vertical EOG signals associated with eye blinks, the proposed HMI can accurately provide sufficient commands with a satisfactory response time. The proposed HMI provides a novel non-manual approach for severely paralyzed individuals to control a wheelchair. Compared with a newly established EOG-based HMI, the proposed HMI can generate more commands with higher accuracy, lower FPR and fewer electrodes.

PC-AT to gamma camera interface Anugami-S

International Nuclear Information System (INIS)

Bhattacharya, Sadhana; Sonalkar, S.Y.; Kataria, S.K.

2000-01-01

The gamma camera interface ANUGAMI-S is an image acquisition system used in nuclear medicine centres and hospitals. The state of the art design of the interface provides quality improvement in addition to image acquisition, by applying on-line uniformity correction which is very essential for gamma camera applications in nuclear medicine. The improvement in the quality of the image has been achieved by image acquisition in positionally varying and sliding energy window. It supports all acquisition modes viz. static, dynamic and gated acquisition modes with and without uniformity correction. The user interface provides the acquisition in various user selectable parameters with image display and related acquisition parameter display. It is a universal system which provides a modern, cost effective and easily maintainable solution for interfacing any gamma camera to PC or upgradation of analog gamma camera. The paper describes the system details and gated acquisition achieved on the present system. (author)

Advances in Human-Computer Interaction: Graphics and Animation Components for Interface Design

Science.gov (United States)

Cipolla Ficarra, Francisco V.; Nicol, Emma; Cipolla-Ficarra, Miguel; Richardson, Lucy

We present an analysis of communicability methodology in graphics and animation components for interface design, called CAN (Communicability, Acceptability and Novelty). This methodology has been under development between 2005 and 2010, obtaining excellent results in cultural heritage, education and microcomputing contexts. In studies where there is a bi-directional interrelation between ergonomics, usability, user-centered design, software quality and the human-computer interaction. We also present the heuristic results about iconography and layout design in blogs and websites of the following countries: Spain, Italy, Portugal and France.

Influence of human-machine-interfaces on the error-proneness of operator interaction with technical systems

International Nuclear Information System (INIS)

Boussoffara, Badi; Elzer, Peter F.

1999-01-01

The paper gives an overview over a research project that has been jointly conducted by four research institutions in Germany since October 1995 with the financial support of the Volkswagen Foundation Germany. The aim of this project is to experimentally investigate the influence of the Human Computer Interface (HCI) on the error-proneness of operators during classification and diagnosis of various process states. Since evaluation of the complete chain 'activation - detection -recognition - diagnosis - action' would have caused some ambiguities with respect to the interpretation of the experimental data only detection and classification of unwanted process states have been evaluated. Depending on the requirements of the various types of experiments the following experimental environments were set up: IPP, IfKog: a simulator of a coal-fired power station (courtesy of ABB); ISTec: a simulator of a nuclear power station (courtesy of GRS); several types of interfaces designed by IPP and IfKog, implemented at IPP; interfaces designed and implemented at ISTec (author) (ml)

Human reliability and the man/machine interface: what do we do after the control room review

International Nuclear Information System (INIS)

Folley, J.D. Jr.; Schurman, D.L.

1983-01-01

The nuclear industry has focused on only one aspect of the man/machine interface--human factors engineering of control rooms - to enhance nuclear power plant (NPP) safety. There are other factors that profoundly affect the reliability of the operators and maintenance personnel of NPP which, thus, affect NPP safety and availability. This paper discusses the factors of training, selection, job engineering, and work satisfaction, describing the potential effects on reactor safety of these factors at the man/machine interface. The impact of these factors on safety and plant availability is illustrated with examples of results obtained in other fields

The nuclear research centre at Bariloche, Argentina

International Nuclear Information System (INIS)

Abriata, J.P.

2001-01-01

The nuclear research centre at Bariloche (CAB) is one of the four centres under the Atomic Energy Commission of Argentina (CNEA). The research programme of CAB addresses various issues like nuclear reactor development, nuclear fuel and fuel cycle, applications of radioisotopes and radiation, and waste management. There is also a basic nuclear science component. The human resource development in the areas of physics and nuclear engineering is done in an associated Balseiro Institute which has undergraduate and graduate programmes as well as doctoral and postdoctoral research. The Centre interacts well with the society and provides services in the nuclear area. It has a close interaction with the nuclear sector of Argentina as also with many international organisations. Regulatory control over the Centre is carried out by the Nuclear Regulatory Authority of Argentina. (author)

A Critique on the Effectiveness of Current Human Reliability Analysis Approach for the Human-Machine Interface Design in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Yong Hee

2010-01-01

Human Reliability Analysis (HRA) in cooperation of PSA has been conducted to evaluate the safety of a system and the validity of a system design. HRA has been believed to provide a quantitative value of human error potential and the safety level of a design alternative in Nuclear Power Plants (NPPs). However, it becomes doubtful that current HRA is worth to conduct to evaluate the human factors of NPP design, since there have been many critiques upon the virtue of HRA. Inevitably, the newer the technology becomes, the larger endeavors bound for the new facilitated methods. This paper describes the limitations and the obsolescence of the current HRA, especially for the design evaluation of Human-Machine Interface (HMI) utilizing the recent digital technologies. An alternative approach to the assessment of the human error potential of HMI design is proposed

How artificial intelligence can help [man-machine interface

International Nuclear Information System (INIS)

Elm, W.C.

1988-01-01

The operator is ultimately responsible for the safe and economical operation of the plant, and must evaluate the accuracy of any system-recommended action or other output. Decision support systems offer a means to improve the man-machine interface by explicitly supporting operator problem solving, rather than complicating decision-making by the need to request an explanation of the rationale behind an expert system's advice during a high stress situation. (author)

Steering a Tractor by Means of an EMG-Based Human-Machine Interface

Directory of Open Access Journals (Sweden)

Sergio Alonso-Garcia

2011-07-01

Full Text Available An electromiographic (EMG-based human-machine interface (HMI is a communication pathway between a human and a machine that operates by means of the acquisition and processing of EMG signals. This article explores the use of EMG-based HMIs in the steering of farm tractors. An EPOC, a low-cost human-computer interface (HCI from the Emotiv Company, was employed. This device, by means of 14 saline sensors, measures and processes EMG and electroencephalographic (EEG signals from the scalp of the driver. In our tests, the HMI took into account only the detection of four trained muscular events on the driver’s scalp: eyes looking to the right and jaw opened, eyes looking to the right and jaw closed, eyes looking to the left and jaw opened, and eyes looking to the left and jaw closed. The EMG-based HMI guidance was compared with manual guidance and with autonomous GPS guidance. A driver tested these three guidance systems along three different trajectories: a straight line, a step, and a circumference. The accuracy of the EMG-based HMI guidance was lower than the accuracy obtained by manual guidance, which was lower in turn than the accuracy obtained by the autonomous GPS guidance; the computed standard deviations of error to the desired trajectory in the straight line were 16 cm, 9 cm, and 4 cm, respectively. Since the standard deviation between the manual guidance and the EMG-based HMI guidance differed only 7 cm, and this difference is not relevant in agricultural steering, it can be concluded that it is possible to steer a tractor by an EMG-based HMI with almost the same accuracy as with manual steering.

US Army Weapon Systems Human-Computer Interface (WSHCI) style guide, Version 1

Energy Technology Data Exchange (ETDEWEB)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

1996-09-30

A stated goal of the U.S. Army has been the standardization of the human computer interfaces (HCIS) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of style guides. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4), in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide. This document, the U.S. Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide, represents the first version of that style guide. The purpose of this document is to provide HCI design guidance for RT/NRT Army systems across the weapon systems domains of ground, aviation, missile, and soldier systems. Each domain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their domains.

Effects of urbanization on animal behaviour : patterns, underlying mechanisms and ultimate causes

OpenAIRE

Miranda, Ana Catarina Sequeira Nunes Coutinho de

2014-01-01

Human-altered environmental conditions affect many species at the global scale. An extreme form of anthropogenic alteration is the existence and rapid increase of urban areas. A key question is how animals cope with urbanization. In order to live in cities, animals have to adjust their behaviour and life histories to the urban novel environment.The main objectives of this thesis were to investigate (i) the existence of behavioural changes related to the urbanization process, (ii) the ultimate...

The mind-writing pupil : A human-computer interface based on decoding of covert attention through pupillometry

NARCIS (Netherlands)

Mathôt, Sebastiaan; Melmi, Jean Baptiste; Van Der Linden, Lotje; Van Der Stigchel, Stefan

2016-01-01

We present a new human-computer interface that is based on decoding of attention through pupillometry. Our method builds on the recent finding that covert visual attention affects the pupillary light response: Your pupil constricts when you covertly (without looking at it) attend to a bright,

Ultimate fate of constrained voters

International Nuclear Information System (INIS)

Vazquez, F; Redner, S

2004-01-01

We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed

Ultimate fate of constrained voters

Energy Technology Data Exchange (ETDEWEB)

Vazquez, F [Department of Physics, Center for BioDynamics, Boston University, Boston, MA 02215 (United States); Redner, S [Department of Physics, Center for Polymer Studies, Boston University, Boston, MA 02215 (United States)

2004-09-03

We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed.

Classification of radioactive waste and determination of waste specifications as well as conditions of acceptance for ultimate storage

International Nuclear Information System (INIS)

Merz, E.

1983-04-01

The determination of waste specification and conditions of acceptance must follow a certain scheme, the basics of which will be presented. First the types of waste and the ultimate storage facilities will be characterized. The various categories of waste will be listed in a universally valid system, and the preliminary conditioning options will be determined. Based on the results of safety analysis taking into account the whole system - geological circumstances, ultimate store mines, types and forms of waste - specifications for the various ultimate store products are to be derived following iterative methods. Suggestions though not of a binding nature and probably subject to eventual revisions in part will be presented. To ensure the safety goals, i.e. the exclusion of radioactivity from the human biosphere, appropriate quality control is required concerning the production and the acceptance at the ultimate store. The guiding principles to be heeded will be discussed in brief. (orig./HP) [de

Human-system interface evaluation system for advanced control room based on SQL database

International Nuclear Information System (INIS)

Zhang Yan; Zhou Zhiwei; Bian Zhiqiang; Xu Li

2005-01-01

User Interface (UI) plays an important role in the advanced control room (ACR) of a nuclear power plant (NPP). In this paper, we present a rule-based ACR Human-system Interface Evaluation System (AHSIES) using expert system technology, which can evaluate UI design shortcomings, propose modification suggestions, and help designer improve the ACR interface design. AHSIES consists of four programs: the UI Editor, the Operation Procedure Manager, the Operation Simulator and the UI Design Evaluator. These four parts respectively function for: editing a set of UI icons employed as the operation screens of an advanced control room; for editing operation procedures aiming at any specified operation with simple language; for simulate the operation sequences dynamically and recording the relevant information for design performance of the UIs; and for evaluating both static and dynamic performance of the ACR UI design according to well established design guidelines and criteria with the information gained from the first three programs. Microsoft SQL Server 2000 DBMS is adopted to manage the voluminous data and its complex relationships. The preliminary test application of AHSIES for a simplified ACR UI design of a PWR NPP has shown that the expert evaluation system is capable of achieving satisfactory evaluation results. (authors)

Ultimate Lateral Capacity of Rigid Pile in c- φ Soil

Science.gov (United States)

Zhang, Wei-min

2018-03-01

To date no analytical solution of the pile ultimate lateral capacity for the general c- φ soil has been obtained. In the present study, a new dimensionless embedded ratio was proposed and the analytical solutions of ultimate lateral capacity and rotation center of rigid pile in c- φ soils were obtained. The results showed that both the dimensionless ultimate lateral capacity and dimensionless rotation center were the univariate functions of the embedded ratio. Also, the ultimate lateral capacity in the c- φ soil was the combination of the ultimate lateral capacity ( f c ) in the clay, and the ultimate lateral capacity ( f φ ) in the sand. Therefore, the Broms chart for clay, solution for clay ( φ=0) put forward by Poulos and Davis, solution for sand ( c=0) obtained by Petrasovits and Awad, and Kondner's ultimate bending moment were all proven to be the special cases of the general solution in the present study. A comparison of the field and laboratory tests in 93 cases showed that the average ratios of the theoretical values to the experimental value ranged from 0.85 to 1.15. Also, the theoretical values displayed a good agreement with the test values.

Man machine interface and its implementation

International Nuclear Information System (INIS)

Hills, B.G.; Boettcher, D.B.; Reed, R.

1992-01-01

Sizewell B is the latest nuclear power station to be constructed in the United Kingdom: its Man-Machine Interfaces are therefore, by definition, the state-of-the-art. This paper discusses the principal Man-Machine Interfaces used in the operation of the station, and the systems that implement them. The Man-Machine Interface facilities discussed are: in the Main Control Room, which is used for normal operation and shutdown of the plant: in the Auxiliary Shutdown Room, which allows shutdown of the reactor if evacuation of the main Control Room is necessary: and in the Technical Support Centre, which is used for remote monitoring of the plant. The Man-Machine Interfaces that are described are parts of a station-wide group of interlinked computer systems called the Data Processing and Control System. This system collects data from the plant and displays it to the operators via discrete devices and on graphical computer displays. It also acquires control inputs from the operators via switches, which are then used to provide remote manual control, modulating control and sequence control. The computer system that handles the plant process data and alarm information displays uses a windowing interface with keyboard and trackerball navigation to allow easy retrieval and viewing of information. It is this system that is the main topic of this paper. (author)

Stapledon's Interplanetary Man: A Commonwealth of Worlds and the Ultimate Purpose of Space Colonisation

Science.gov (United States)

Crawford, Ian A.

In his 1948 lecture to the British Interplanetary Society Stapledon considered the ultimate purpose of colonising other worlds. Having examined the possible motivations arising from improved scientific knowledge and access to extraterrestrial raw materials, he concludes that the ultimate benefits of space colonisation will be the increased opportunities for developing human (and post-human) diversity, intellectual and aesthetic potential and, especially, `spirituality'. By the latter concept he meant a striving for ``sensitive and intelligent awareness of things in the universe (including persons), and of the universe as a whole.'' A key insight articulated by Stapledon in this lecture was that this should be the aspiration of all human development anyway, with or without space colonisation, but that the latter would greatly increase the scope for such developments. Another key aspect of his vision was the development of a diverse, but connected, `Commonwealth of Worlds' extending throughout the Solar System, and eventually beyond, within which human potential would be maximised. In this paper I analyse Stapledon's vision of space colonisation, and will conclude that his overall conclusions remain sound. However, I will also argue that he was overly utopian in believing that human social and political unity are prerequisites for space exploration (while agreeing that they are desirable objectives in their own right), and that he unnecessarily downplayed the more prosaic scientific and economic motivations which are likely to be key drivers for space exploration (if not colonisation) in the shorter term. Finally, I draw attention to some recent developments in international space policy which, although probably not influenced by Stapledon's work, are nevertheless congruent with his overarching philosophy as outlined in `Interplanetary Man?'.

Ultimate Educational Aims, Overridingness, and Personal Well-Being

Science.gov (United States)

Haji, Ishtiyaque; Cuypers, Stefaan E.

2011-01-01

Discussion regarding education's aims, especially its ultimate aims, is a key topic in the philosophy of education. These aims or values play a pivotal role in regulating and structuring moral and other types of normative education. We outline two plausible strategies to identify and justify education's ultimate aims. The first associates these…

Playful Interfaces : Introduction and History

NARCIS (Netherlands)

Nijholt, Anton; Nijholt, A.

2014-01-01

In this short survey we have some historical notes about human-computer interface development with an emphasis on interface technology that has allowed us to design playful interactions with applications. The applications do not necessarily have to be entertainment applications. We can have playful

Structural impact detection with vibro-haptic interfaces

Science.gov (United States)

Jung, Hwee-Kwon; Park, Gyuhae; Todd, Michael D.

2016-07-01

This paper presents a new sensing paradigm for structural impact detection using vibro-haptic interfaces. The goal of this study is to allow humans to ‘feel’ structural responses (impact, shape changes, and damage) and eventually determine health conditions of a structure. The target applications for this study are aerospace structures, in particular, airplane wings. Both hardware and software components are developed to realize the vibro-haptic-based impact detection system. First, L-shape piezoelectric sensor arrays are deployed to measure the acoustic emission data generated by impacts on a wing. Unique haptic signals are then generated by processing the measured acoustic emission data. These haptic signals are wirelessly transmitted to human arms, and with vibro-haptic interface, human pilots could identify impact location, intensity and possibility of subsequent damage initiation. With the haptic interface, the experimental results demonstrate that human could correctly identify such events, while reducing false indications on structural conditions by capitalizing on human’s classification capability. Several important aspects of this study, including development of haptic interfaces, design of optimal human training strategies, and extension of the haptic capability into structural impact detection are summarized in this paper.

'My child will never initiate Ultimate Harm': an argument against moral enhancement.

Science.gov (United States)

Tonkens, Ryan

2015-03-01

Recently, there has been a lot of philosophical work published on the morality of moral enhancement. One thing that tends to get overlooked in this literature is that there are many different potential methods of morally enhancing humans, and a blanket moral assessment of them may not be warranted. Here I focus on one mode of moral enhancement, namely, prenatal genetic moral enhancement, and offer a normative assessment of it. I argue that there is good reason to adopt a parent-centred perspective (as opposed to a social or state-centred perspective) towards the ethics of prenatal genetic moral enhancement, and, once we do so, that there is good reason to argue that prenatal genetic attempts at moral enhancement are morally problematic and ought not to be pursued. The main reasons for this have to do with the nature of moral enhancement research, and the idea that prospective parents are justified in not assuming that their children will be morally depraved. I leave it open as to whether other modes of morally enhancing humans fare better, morally speaking. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The management of interfaces between organizations involved with the construction of Sizewell 'B'

International Nuclear Information System (INIS)

Butler, P.H.; Salmons, B.H.

1990-01-01

The overall organisation for the design, construction and commissioning of Sizewell 'B' is described, together with the specific responsibilities of the organisations involved. The paper describes how the parameters for each interface are identified, and how the formal arrangements for controlling transmission of information and material are handled. Whilst each organisation will perceive quality achievement as the ultimate objective, the specific individual responsibilities may dictate different, and sometimes opposing mechanisms for implementation, due to different perceptions of priority. The PWR Project Group has the ultimate responsibility for building Sizewell 'B' to cost and schedule and to the specified quality, and the paper describes, with some examples, how the different perceptions are addressed in order to achieve the ultimate objective. (author)

Epidemiology of Brucella infection in the human, livestock and wildlife interface in the Katavi-Rukwa ecosystem, Tanzania.

Science.gov (United States)

Assenga, Justine A; Matemba, Lucas E; Muller, Shabani K; Malakalinga, Joseph J; Kazwala, Rudovick R

2015-08-08

Brucellosis is a zoonosis of public health importance worldwide. In Tanzania, the disease is underreported due to insufficient awareness, inadequate diagnostic protocols, including lack of appropriate reagents for diagnosis. Livestock and wildlife are considered potential sources of infection to humans; however, the role played by these carriers in the epidemiology of the disease in the ecosystems in Tanzania is not fully understood. The objective of this study was to establish the prevalence of anti-Brucella antibodies in humans, wildlife and livestock; and molecular prevalence of Brucella spp in cattle and goats in the Katavi- Rukwa ecosystem. Anti-Brucella antibodies were detected in humans at 0.6 % (95 % CI: 0.1, 2.1 %); cattle at 6.8 % (95 % CI: 5.4, 8.5 %), goats at 1.6 % (95 % CI: 0.4, 4.1 %) and buffaloes at 7.9 % (95 % CI: 1.7, 21.4 %). One of the two sampled lions tested positive. Cattle had a significantly higher prevalence of anti-Brucella antibodies as compared to goats (P Brucella infection. Eight (3.5 %) out of 231 milk samples tested were positive for Brucella spp on Polymerase Chain Reaction (PCR), and Brucella abortus biovar 1 was detected in cattle milk. However, no Brucella spp were detected in goat milk. This study has shown the presence of anti- Brucella antibodies in humans, livestock, and wildlife in the Katavi- Rukwa ecosystem. Transmission of the infection between wildlife, livestock and humans is likely to continue due to increasing human activities in the human wildlife interface. This information is an important contribution to public health policy development in the human wildlife interface of the Katavi- Rukwa ecosystem.

A model for assessing the degree of importance of ergonomics criteria to human machine interface

Energy Technology Data Exchange (ETDEWEB)

Araujo, Cesar Ribeiro de; Domech More, Jesus [Universidade Estacio de Sa do Rio de Janeiro, RJ (Brazil). Mestrado em Desenvolvimento Empresarial - MADE]. E-mail: cesararaujobr@yahoo.com.br; jesus.more@estacio.br; Silva, Aretha Felix Thomaz da [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Sistemas Computacionais Orientados a Industria do Petroleo]. E-mail: aretha@coc.ufrj.br

2007-07-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

A model for assessing the degree of importance of ergonomics criteria to human machine interface

International Nuclear Information System (INIS)

Araujo, Cesar Ribeiro de; Domech More, Jesus; Silva, Aretha Felix Thomaz da

2007-01-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

Roadmap for Research, Development, and Demonstration of Instrumentation, Controls, and Human-Machine Interface Technologies

International Nuclear Information System (INIS)

Miller, Don W.; Arndt, Steven A.; Bond, Leonard J.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

2008-01-01

Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by a number of concerns. Although international implementation of evolutionary nuclear power plants and the progression toward new plants in the United States have spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, design and development programs by the U.S. Department of Energy (DOE) for advanced reactor concepts, such as the Generation IV Program and Next Generation Nuclear Plant (NGNP), introduce different plant conditions and unique plant configurations that increase the need for enhanced ICHMI capabilities to fully achieve programmatic goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, there are challenges that need to be addressed to enable the nuclear power industry to effectively and efficiently complete the transition to safe and comprehensive use of digital technology

Intermodal Logistics Centres and Freight Corridors – Concepts and Trends

Directory of Open Access Journals (Sweden)

Norbert Wagener

2017-09-01

Full Text Available . Background: The development of international freight corridors, as the Trans European Network and new rail and inland shipping corridors in Asia and Africa, require efficient logistics centres along these corridors which serve as intermodal interfaces and provide a variety of different logistics service functions. The definition of the term logistics centre differs between countries and implies different functionalities. Locations are often selected randomly and business models are opportunity driven, especially in highly dynamic and less regulated new emerging economies. In particular Freight Villages as a special form of logistics centres have a high impact on regional development and serve as cargo generator for freight corridors. Consideration of general principles how to establish Freight Villages could improve the effectiveness of these logistics centres along freight corridors. Methods: Based on a literature review a comprehensive and hierarchical definition of logistics centres will be discussed and applied. From experiences in the development of logistics centres in several countries, especially in Germany and Lithuania, challenges and concepts concerning regulatory framework, determination of location and business and financing models are discussed. Results: Concerning the definition of logistics centres a hierarchical definition is applied which comprises different levels of logistics centres depending on the scope of the value adding and the functionality. As general principles for the development of Freight Villages the active role of the state, master planning, objective location finding, participation and co-operation of different stakeholders in the business model and a stepwise scheme for financing are introduced. Major trends for the future development of Freight Villages are the digitalization of supply chains, the application of new intermodal technologies and of innovative telematics systems, solutions for low emission and

A Chronically Implantable Bidirectional Neural Interface for Non-human Primates

Directory of Open Access Journals (Sweden)

Misako Komatsu

2017-09-01

Full Text Available Optogenetics has potential applications in the study of epilepsy and neuroprostheses, and for studies on neural circuit dynamics. However, to achieve translation to clinical usage, optogenetic interfaces that are capable of chronic stimulation and monitoring with minimal brain trauma are required. We aimed to develop a chronically implantable device for photostimulation of the brain of non-human primates. We used a micro-light-emitting diode (LED array with a flexible polyimide film. The array was combined with a whole-cortex electrocorticographic (ECoG electrode array for simultaneous photostimulation and recording. Channelrhodopsin-2 (ChR2 was virally transduced into the cerebral cortex of common marmosets, and then the device was epidurally implanted into their brains. We recorded the neural activity during photostimulation of the awake monkeys for 4 months. The neural responses gradually increased after the virus injection for ~8 weeks and remained constant for another 8 weeks. The micro-LED and ECoG arrays allowed semi-invasive simultaneous stimulation and recording during long-term implantation in the brains of non-human primates. The development of this device represents substantial progress in the field of optogenetic applications.

The Control of Behavior: Human and Environmental

Science.gov (United States)

Burhoe, Ralph Wendell

1972-01-01

Theological perspective on human and environmental behavior, with a view toward man's ultimate concerns or longest range values and the ultimate controls of behavior. Maintains that all human behavior and destiny is ultimately in the hand of a transcendent power which prevails over any human errors.'' (LK)

Loop-R : Real-Time Video Interface

OpenAIRE

Pereira, Rui

2007-01-01

Loop-R is a real-time video performance tool, based in the exploration of low-tech, used technology and human engineering research. With this tool its , , author is giving a shout to industry, using existing and mistreated technology in innovative ways, combining concepts and interfaces: blending segregated interfaces (GUI and Physical) into one. After graspable interfaces and the "end" of WIMP interfaces, hardware and software blend themselves in a new genre providing free control of video-l...

A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

Energy Technology Data Exchange (ETDEWEB)

Kovesdi, C.; Joe, J.; Boring, R.

2017-05-01

The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to support migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.

Human Motion Tracking and Glove-Based User Interfaces for Virtual Environments in ANVIL

Science.gov (United States)

Dumas, Joseph D., II

2002-01-01

The Army/NASA Virtual Innovations Laboratory (ANVIL) at Marshall Space Flight Center (MSFC) provides an environment where engineers and other personnel can investigate novel applications of computer simulation and Virtual Reality (VR) technologies. Among the many hardware and software resources in ANVIL are several high-performance Silicon Graphics computer systems and a number of commercial software packages, such as Division MockUp by Parametric Technology Corporation (PTC) and Jack by Unigraphics Solutions, Inc. These hardware and software platforms are used in conjunction with various VR peripheral I/O (input / output) devices, CAD (computer aided design) models, etc. to support the objectives of the MSFC Engineering Systems Department/Systems Engineering Support Group (ED42) by studying engineering designs, chiefly from the standpoint of human factors and ergonomics. One of the more time-consuming tasks facing ANVIL personnel involves the testing and evaluation of peripheral I/O devices and the integration of new devices with existing hardware and software platforms. Another important challenge is the development of innovative user interfaces to allow efficient, intuitive interaction between simulation users and the virtual environments they are investigating. As part of his Summer Faculty Fellowship, the author was tasked with verifying the operation of some recently acquired peripheral interface devices and developing new, easy-to-use interfaces that could be used with existing VR hardware and software to better support ANVIL projects.

User interface issues in supporting human-computer integrated scheduling

Science.gov (United States)

Cooper, Lynne P.; Biefeld, Eric W.

1991-01-01

The topics are presented in view graph form and include the following: characteristics of Operations Mission Planner (OMP) schedule domain; OMP architecture; definition of a schedule; user interface dimensions; functional distribution; types of users; interpreting user interaction; dynamic overlays; reactive scheduling; and transitioning the interface.

Experimental investigation of ultimate loads

Energy Technology Data Exchange (ETDEWEB)

Petersen, S M; Larsen, G C; Antoniou, I; Lind, S O; Courtney, M [Risoe National Lab., Wind Energy and Atmospheric Physics, Roskilde (Denmark)

1999-03-01

Verification of the structural integrity of a wind turbine involves analysis of fatigue loading as well as ultimate loading. With the trend of persistently growing turbines, the ultimate loading seems to become relatively more important. For wind turbines designed according to the wind conditions prescribed in the IEC-61400 code, the ultimate load is often identified as the leading load parameter. Exemplified by the use of an extensive measurement campaign a procedure for evaluation of the extreme flap-wise bending moments, occurring during normal operating of a wind turbine, is presented. The structural measurements are made on a NEG Micon 650 kW wind turbine erected at a complex high wind site in Oak Creek, California. The turbine is located on the top of a ridge. The prevailing wind direction is perpendicular to the ridge, and the annual mean wind speed is 9.5 m/s. The associated wind field measurement, are taken from two instrumented masts erected less than one rotor diameter in front of the turbine in direction of the prevailing wind direction. Both masts are instrumented at different heights in order to gain insight of the 3D-wind speed structure over the entire rotor plane. Extreme distributions, associated with a recurrence period of 10 minutes, conditioned on the mean wind speed and the turbulence intensity are derived. Combined with the wind climate model proposed in the IEC standard, these distributions are used to predict extreme distributions with recurrence periods equal to one and fifty years, respectively. The synthesis of the conditioned PDF`s and the wind climate model is performed by means of Monte Carlo simulation. (au)

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

Science.gov (United States)

2005-01-01

The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

Autotuning of PID controller by means of human machine interface device

Directory of Open Access Journals (Sweden)

Michał Awtoniuk

2017-06-01

Full Text Available More and more control systems are based on industry microprocessors like PLC controllers (Programmable Logic Controller. The most commonly used control algorithm is PID (Proportional-Integral-Derivative algorithm. Autotuning procedure is not available in every PLC. These controllers are typically used in cooperation with HMI (Human Machine Interface devices. In the study two procedures of autotuning of the PID controller were implemented in the HMI device: step method and relay method. Six tuning rules for step methods and one for relay method were chosen. The autotuning procedures on simulated controlled object and PLC controller without build-in autotuning were tested. The object of control was first order system plus time delay.

The Ozone Widget Framework: towards modularity of C2 human interfaces

Science.gov (United States)

Hellar, David Benjamin; Vega, Laurian C.

2012-05-01

The Ozone Widget Framework (OWF) is a common webtop environment for distribution across the enterprise. A key mission driver for OWF is to enable rapid capability delivery by lowering time-to-market with lightweight components. OWF has been released as Government Open Source Software and has been deployed in a variety of C2 net-centric contexts ranging from real-time analytics, cyber-situational awareness, to strategic and operational planning. This paper discusses the current and future evolution of OWF including the availability of the OZONE Marketplace (OMP), useractivity driven metrics, and architecture enhancements for accessibility. Together, OWF is moving towards the rapid delivery of modular human interfaces supporting modern and future command and control contexts.

Ultimate internal pressure capacity of concrete containment structures

International Nuclear Information System (INIS)

Krishnaswamy, C.N.; Namperumal, R.; Al-Dabbagh, A.

1983-01-01

Lesson learned from the accident at Three-Mile Island nuclear plant has necessitated the computation of the ultimate internal pressure capacity of containment structures as a licensing requirement in the U.S. In general, a containment structure is designed to be essentially elastic under design accident pressure. However, as the containment pressure builds up beyond the design value due to a more severe postulated accident, the containment response turns nonlinear as it sequentially passes through cracking of concrete, yielding of linear plate, yielding of rebar, and yielding of post-tensioning tendon (if the containment concrete is prestressed). This paper reports on the determination of the ultimate internal pressure capacity and nonlinear behavior of typical reinforced and prestressed concrete BWR containments. The probable modes of failure, the criteria for ultimate pressure capacity, and the most critical sections are described. Simple equations to hand-calculate the ultimate pressure capacity and the nonlinear behavior at membrane sections of the containment shell are presented. A nonlinear finite element analysis performed to determine the nonlinear behavior of the entire shell including nonmembrane sections is briefly discribed. The analysis model consisted of laminated axisymmetric shell finite elements with nonlinear stress-strain properties for each material. Results presented for typical BWR concrete containments include nonlinear response plots of internal pressure versus containment deflection and strains in the liner, rebar, and post-tensioning tendons at the most stressed section in the shell. Leak-tightness of the containment liner and the effect of thermal loads on the ultimate capacity are discussed. (orig.)

Multichannel noninvasive human-machine interface via stretchable µm thick sEMG patches for robot manipulation

Science.gov (United States)

Zhou, Ying; Wang, Youhua; Liu, Runfeng; Xiao, Lin; Zhang, Qin; Huang, YongAn

2018-01-01

Epidermal electronics (e-skin) emerging in recent years offer the opportunity to noninvasively and wearably extract biosignals from human bodies. The conventional processes of e-skin based on standard microelectronic fabrication processes and a variety of transfer printing methods, nevertheless, unquestionably constrains the size of the devices, posing a serious challenge to collecting signals via skin, the largest organ in the human body. Herein we propose a multichannel noninvasive human-machine interface (HMI) using stretchable surface electromyography (sEMG) patches to realize a robot hand mimicking human gestures. Time-efficient processes are first developed to manufacture µm thick large-scale stretchable devices. With micron thickness, the stretchable µm thick sEMG patches show excellent conformability with human skin and consequently comparable electrical performance with conventional gel electrodes. Combined with the large-scale size, the multichannel noninvasive HMI via stretchable µm thick sEMG patches successfully manipulates the robot hand with eight different gestures, whose precision is as high as conventional gel electrodes array.

DARPA-funded efforts in the development of novel brain-computer interface technologies.

Science.gov (United States)

Miranda, Robbin A; Casebeer, William D; Hein, Amy M; Judy, Jack W; Krotkov, Eric P; Laabs, Tracy L; Manzo, Justin E; Pankratz, Kent G; Pratt, Gill A; Sanchez, Justin C; Weber, Douglas J; Wheeler, Tracey L; Ling, Geoffrey S F

2015-04-15

The Defense Advanced Research Projects Agency (DARPA) has funded innovative scientific research and technology developments in the field of brain-computer interfaces (BCI) since the 1970s. This review highlights some of DARPA's major advances in the field of BCI, particularly those made in recent years. Two broad categories of DARPA programs are presented with respect to the ultimate goals of supporting the nation's warfighters: (1) BCI efforts aimed at restoring neural and/or behavioral function, and (2) BCI efforts aimed at improving human training and performance. The programs discussed are synergistic and complementary to one another, and, moreover, promote interdisciplinary collaborations among researchers, engineers, and clinicians. Finally, this review includes a summary of some of the remaining challenges for the field of BCI, as well as the goals of new DARPA efforts in this domain. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Visual and tactile interfaces for bi-directional human robot communication

Science.gov (United States)

Barber, Daniel; Lackey, Stephanie; Reinerman-Jones, Lauren; Hudson, Irwin

2013-05-01

Seamless integration of unmanned and systems and Soldiers in the operational environment requires robust communication capabilities. Multi-Modal Communication (MMC) facilitates achieving this goal due to redundancy and levels of communication superior to single mode interaction using auditory, visual, and tactile modalities. Visual signaling using arm and hand gestures is a natural method of communication between people. Visual signals standardized within the U.S. Army Field Manual and in use by Soldiers provide a foundation for developing gestures for human to robot communication. Emerging technologies using Inertial Measurement Units (IMU) enable classification of arm and hand gestures for communication with a robot without the requirement of line-of-sight needed by computer vision techniques. These devices improve the robustness of interpreting gestures in noisy environments and are capable of classifying signals relevant to operational tasks. Closing the communication loop between Soldiers and robots necessitates them having the ability to return equivalent messages. Existing visual signals from robots to humans typically require highly anthropomorphic features not present on military vehicles. Tactile displays tap into an unused modality for robot to human communication. Typically used for hands-free navigation and cueing, existing tactile display technologies are used to deliver equivalent visual signals from the U.S. Army Field Manual. This paper describes ongoing research to collaboratively develop tactile communication methods with Soldiers, measure classification accuracy of visual signal interfaces, and provides an integration example including two robotic platforms.

Open-Box Muscle-Computer Interface: Introduction to Human-Computer Interactions in Bioengineering, Physiology, and Neuroscience Courses

Science.gov (United States)

Landa-Jiménez, M. A.; González-Gaspar, P.; Pérez-Estudillo, C.; López-Meraz, M. L.; Morgado-Valle, C.; Beltran-Parrazal, L.

2016-01-01

A Muscle-Computer Interface (muCI) is a human-machine system that uses electromyographic (EMG) signals to communicate with a computer. Surface EMG (sEMG) signals are currently used to command robotic devices, such as robotic arms and hands, and mobile robots, such as wheelchairs. These signals reflect the motor intention of a user before the…

Software and Human-Machine Interface Development for Environmental Controls Subsystem Support

Science.gov (United States)

Dobson, Matthew

2018-01-01

The Space Launch System (SLS) is the next premier launch vehicle for NASA. It is the next stage of manned space exploration from American soil, and will be the platform in which we push further beyond Earth orbit. In preparation of the SLS maiden voyage on Exploration Mission 1 (EM-1), the existing ground support architecture at Kennedy Space Center required significant overhaul and updating. A comprehensive upgrade of controls systems was necessary, including programmable logic controller software, as well as Launch Control Center (LCC) firing room and local launch pad displays for technician use. Environmental control acts as an integral component in these systems, being the foremost system for conditioning the pad and extremely sensitive launch vehicle until T-0. The Environmental Controls Subsystem (ECS) required testing and modification to meet the requirements of the designed system, as well as the human factors requirements of NASA software for Validation and Verification (V&V). This term saw significant strides in the progress and functionality of the human-machine interfaces used at the launch pad, and improved integration with the controller code.

Intelligent Multi-Media Integrated Interface Project

Science.gov (United States)

1990-06-01

been devoted to the application of aritificial intelligence technology to the development of human -computer interface technology that integrates speech...RADC-TR-90-128 Final Technical Report June 1090 AD-A225 973 INTELLIGENT MULTI-MEDIA INTEGRATED INTERFACE PROJECT Calspan-University of Buffalo...contractual obligations or notices on a specific document require that it be returned. INTELLIGENT MULTI-MEDIA INTEGRATED INTERFACE PROJECT J. G. Neal J. M

Ultimate load capacity assessment of reinforced concrete shell structures

International Nuclear Information System (INIS)

Gupta, Amita; Singh, R.K.; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

1993-01-01

The objective of this study is to develop capability for prediction of ultimate load capacity of reinforced concrete shell structures. The present finite element code ULCA (Ultimate Load Capacity Assessment) adopts a degenerate concept of formulating general isoparametric shell element with a layered approach in the thickness direction. Different failure modes such as crushing, tensile cracking and reinforcement yielding are recognised for various problems. The structure fails by crushing of concrete when the concrete strain/stress reaches the ultimate stress or strain of concrete. Material nonlinearities as a result of tension cracking, tension stiffening between reinforcement and concrete in cracked region and yielding of reinforcement are considered along with geometric nonlinearity. Thus with this code it is possible to predict the pressure at which the first cracking, first through thickness cracking, first yielding of reinforcement occurs. After validating the code with few bench mark problems for different failure modes a reinforced concrete nuclear containment is analysed for its ultimate capacity and the results are matched with the published results. Further the ultimate load capacity of outer containment wall of Narora Atomic Power Station is predicted. It is observed that containment fails in membrane region and has a sufficient margin against design pressure. (author). 9 refs., 56 figs., 3 tabs., 1 appendix with 4 tabs

Direct ultimate disposal - state of investigations and prospects

International Nuclear Information System (INIS)

Gasterstaedt, N.

1991-01-01

Based on a decision adopted by the Prime Ministers on 25/10/90, the principles governing preventive waste management of nuclear power plants are reviewed. Increasing importance is attached to the direct ultimate disposal alternative. The legal and political framework, the technology involved, the state of developments, future activities under the R and D programme as well as a cost estimate of direct ultimate disposal are presented. (orig.) [de

Cognitive Awareness Prototype Development on User Interface Design

Science.gov (United States)

Rosli, D'oria Islamiah

2015-01-01

Human error is a crucial problem in manufacturing industries. Due to the misinterpretation of information on interface system design, accidents or death may occur at workplace. Lack of human cognition criteria in interface system design is also one of the contributions to the failure in using the system effectively. Therefore, this paper describes…

Leptospirosis in Rio Grande do Sul, Brazil: An Ecosystem Approach in the Animal-Human Interface

Science.gov (United States)

Schneider, Maria Cristina; Najera, Patricia; Pereira, Martha M.; Machado, Gustavo; dos Anjos, Celso B.; Rodrigues, Rogério O.; Cavagni, Gabriela M.; Muñoz-Zanzi, Claudia; Corbellini, Luis G.; Leone, Mariana; Buss, Daniel F.; Aldighieri, Sylvain; Espinal, Marcos A.

2015-01-01

Background Leptospirosis is an epidemic-prone neglected disease that affects humans and animals, mostly in vulnerable populations. The One Health approach is a recommended strategy to identify drivers of the disease and plan for its prevention and control. In that context, the aim of this study was to analyze the distribution of human cases of leptospirosis in the State of Rio Grande do Sul, Brazil, and to explore possible drivers. Additionally, it sought to provide further evidence to support interventions and to identify hypotheses for new research at the human-animal-ecosystem interface. Methodology and findings The risk for human infection was described in relation to environmental, socioeconomic, and livestock variables. This ecological study used aggregated data by municipality (all 496). Data were extracted from secondary, publicly available sources. Thematic maps were constructed and univariate analysis performed for all variables. Negative binomial regression was used for multivariable statistical analysis of leptospirosis cases. An annual average of 428 human cases of leptospirosis was reported in the state from 2008 to 2012. The cumulative incidence in rural populations was eight times higher than in urban populations. Variables significantly associated with leptospirosis cases in the final model were: Parana/Paraiba ecoregion (RR: 2.25; CI95%: 2.03–2.49); Neossolo Litolítico soil (RR: 1.93; CI95%: 1.26–2.96); and, to a lesser extent, the production of tobacco (RR: 1.10; CI95%: 1.09–1.11) and rice (RR: 1.003; CI95%: 1.002–1.04). Conclusion Urban cases were concentrated in the capital and rural cases in a specific ecoregion. The major drivers identified in this study were related to environmental and production processes that are permanent features of the state. This study contributes to the basic knowledge on leptospirosis distribution and drivers in the state and encourages a comprehensive approach to address the disease in the animal-human

Sensitivity analysis on ultimate strength of aluminium stiffened panels

DEFF Research Database (Denmark)

Rigo, P.; Sarghiuta, R.; Estefen, S.

2003-01-01

This paper presents the results of an extensive sensitivity analysis carried out by the Committee III.1 "Ultimate Strength" of ISSC?2003 in the framework of a benchmark on the ultimate strength of aluminium stiffened panels. Previously, different benchmarks were presented by ISSC committees on ul...

APPLYING ARTIFICIAL INTELLIGENCE TECHNIQUES TO HUMAN-COMPUTER INTERFACES

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1988-01-01

A description is given of UIMS (User Interface Management System), a system using a variety of artificial intelligence techniques to build knowledge-based user interfaces combining functionality and information from a variety of computer systems that maintain, test, and configure customer telephone...... and data networks. Three artificial intelligence (AI) techniques used in UIMS are discussed, namely, frame representation, object-oriented programming languages, and rule-based systems. The UIMS architecture is presented, and the structure of the UIMS is explained in terms of the AI techniques....

U.S. Army weapon systems human-computer interface style guide. Version 2

Energy Technology Data Exchange (ETDEWEB)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.; Donohoo, D.T.

1997-12-31

A stated goal of the US Army has been the standardization of the human computer interfaces (HCIs) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of HCI design guidance documents. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4), in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA), now termed the Joint Technical Architecture-Army (JTA-A). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide, which resulted in the US Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide Version 1. Based on feedback from the user community, DISC4 further tasked PNNL to revise Version 1 and publish Version 2. The intent was to update some of the research and incorporate some enhancements. This document provides that revision. The purpose of this document is to provide HCI design guidance for the RT/NRT Army system domain across the weapon systems subdomains of ground, aviation, missile, and soldier systems. Each subdomain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their subdomains.

Spin-photon interface and spin-controlled photon switching in a nanobeam waveguide

DEFF Research Database (Denmark)

Javadi, Alisa; Ding, Dapeng; Appel, Martin Hayhurst

2018-01-01

Access to the electron spin is at the heart of many protocols for integrated and distributed quantum-information processing [1-4]. For instance, interfacing the spin-state of an electron and a photon can be utilized to perform quantum gates between photons [2,5] or to entangle remote spin states [6......-9]. Ultimately, a quantum network of entangled spins constitutes a new paradigm in quantum optics [1]. Towards this goal, an integrated spin-photon interface would be a major leap forward. Here we demonstrate an efficient and optically programmable interface between the spin of an electron in a quantum dot...... and photons in a nanophotonic waveguide. The spin can be deterministically prepared with a fidelity of 96\\%. Subsequently the system is used to implement a "single-spin photonic switch", where the spin state of the electron directs the flow of photons through the waveguide. The spin-photon interface may...

Human-system interfaces for the ABWR control room

International Nuclear Information System (INIS)

Gutierrez, R.; O'Neil, T.J.

1993-01-01

The 1300-MW(electric) advanced boiling water reactor (ABWR) design has been developed by General Electric Co. (G.E.) and its technical associates, Hitachi Ltd. and Toshiba Corporation, under the sponsorship of the Tokyo Electric Power Company. Key features of the ABWR include simplification, improved safety and reliability, reduced occupational exposure and radwaste, improved maneuverability, and reduced construction, fuel, and operating costs. The ABWR incorporates the best proven features from BWR designs in Japan, Europe, and the United States, combined with the broad-scope application of leading-edge technology. The first application of the ABWR design will be at TEP-CO's Kashiwazaki-Kariwa nuclear power station units 6 and 7, which are scheduled to begin commercial operation in 1996 and 1997, respectively. The ABWR is also the lead plant in the U.S. standard plant design certification program. It is scheduled to receive final approval from the U.S. Nuclear Regulatory Commission in early 1994. The development of the human system interaces (HSI) for the ABWR is an extension of the operating experience of existing man-machine interfaces currently being used at GE-designed plants

The job demands-resources model of work engagement in South African call centres

OpenAIRE

Yolandi Janse van Rensburg; Billy Boonzaier; Michèle Boonzaier

2013-01-01

Orientation: A ‘sacrificial human resource strategy’ is practised in call centres, resulting in poor employee occupational health. Consequently, questions are posed in terms of the consequences of call centre work and which salient antecedent variables impact the engagement and wellbeing of call centre representatives. Research purpose: Firstly, to gauge the level of employee engagement amongst a sample of call centre representatives in South Africa and, secondly, to track the paths throu...

Step 1: Human System Interface (HSI) Functional Requirements Document (FRD). Version 2

Science.gov (United States)

2006-01-01

This Functional Requirements Document (FRD) establishes a minimum set of Human System Interface (HSI) functional requirements to achieve the Access 5 Vision of "operating High Altitude, Long Endurance (HALE) Unmanned Aircraft Systems (UAS) routinely, safely, and reliably in the National Airspace System (NAS)". Basically, it provides what functions are necessary to fly UAS in the NAS. The framework used to identify the appropriate functions was the "Aviate, Navigate, Communicate, and Avoid Hazards" structure identified in the Access 5 FRD. As a result, fifteen high-level functional requirements were developed. In addition, several of them have been decomposed into low-level functional requirements to provide more detail.

Development of comprehensive HFE guidelines for the evaluation of NPP human systems interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Wachtel, J.

1994-01-01

Advanced control room (ACR) concepts are being developed in the commercial nuclear power industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the ways in which the operator interacts with and supervises an increasingly complex system. The US Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support its review of these advanced designs. This paper discusses (1) the development of guidelines for advanced HSI review, (2) the integration of those guidelines with existing guidance, and (3) a methodology for further guidance development

A Novel Wearable Forehead EOG Measurement System for Human Computer Interfaces.

Science.gov (United States)

Heo, Jeong; Yoon, Heenam; Park, Kwang Suk

2017-06-23

Amyotrophic lateral sclerosis (ALS) patients whose voluntary muscles are paralyzed commonly communicate with the outside world using eye movement. There have been many efforts to support this method of communication by tracking or detecting eye movement. An electrooculogram (EOG), an electro-physiological signal, is generated by eye movements and can be measured with electrodes placed around the eye. In this study, we proposed a new practical electrode position on the forehead to measure EOG signals, and we developed a wearable forehead EOG measurement system for use in Human Computer/Machine interfaces (HCIs/HMIs). Four electrodes, including the ground electrode, were placed on the forehead. The two channels were arranged vertically and horizontally, sharing a positive electrode. Additionally, a real-time eye movement classification algorithm was developed based on the characteristics of the forehead EOG. Three applications were employed to evaluate the proposed system: a virtual keyboard using a modified Bremen BCI speller and an automatic sequential row-column scanner, and a drivable power wheelchair. The mean typing speeds of the modified Bremen brain-computer interface (BCI) speller and automatic row-column scanner were 10.81 and 7.74 letters per minute, and the mean classification accuracies were 91.25% and 95.12%, respectively. In the power wheelchair demonstration, the user drove the wheelchair through an 8-shape course without collision with obstacles.

Recent Activities Of The World Data Centre For Geomagnetism (Edinburgh)

OpenAIRE

Reay, Sarah; Humphries, Tom; Macmillan, Susan; Flower, Simon; Stevenson, Peter; Clarke, Ellen

2015-01-01

For almost 50 years the World Data Centre for Geomagnetism (Edinburgh) has been a custodian of geomagnetic data. In particular, over recent years the scope of the data holdings has been increased, quality control measures introduced and better interfaces to make the data more accessible to users are being developed. The WDC hold geomagnetic time-series data from around 280 observatories worldwide at a number of time resolutions along with various magnetic survey, model, and geomagnetic ac...

"Involving interface": an extended mind theoretical approach to roboethics.

Science.gov (United States)

Anderson, Miranda; Ishiguro, Hiroshi; Fukushi, Tamami

2010-11-01

In 2008 the authors held "Involving Interface," a lively interdisciplinary event focusing on issues of biological, sociocultural, and technological interfacing (see Acknowledgments). Inspired by discussions at this event, in this article, we further discuss the value of input from neuroscience for developing robots and machine interfaces, and the value of philosophy, the humanities, and the arts for identifying persistent links between human interfacing and broader ethical concerns. The importance of ongoing interdisciplinary debate and public communication on scientific and technical advances is also highlighted. Throughout, the authors explore the implications of the extended mind hypothesis for notions of moral accountability and robotics.

Development of a Compact Wireless Laplacian Electrode Module for Electromyograms and Its Human Interface Applications

Directory of Open Access Journals (Sweden)

Akira Ichikawa

2013-02-01

Full Text Available In this study, we developed a compact wireless Laplacian electrode module for electromyograms (EMGs. One of the advantages of the Laplacian electrode configuration is that EMGs obtained with it are expected to be sensitive to the firing of the muscle directly beneath the measurement site. The performance of the developed electrode module was investigated in two human interface applications: character-input interface and detection of finger movement during finger Braille typing. In the former application, the electrode module was combined with an EMG-mouse click converter circuit. In the latter, four electrode modules were used for detection of finger movements during finger Braille typing. Investigation on the character-input interface indicated that characters could be input stably by contraction of (a the masseter, (b trapezius, (c anterior tibialis and (d flexor carpi ulnaris muscles. This wide applicability is desirable when the interface is applied to persons with physical disabilities because the disability differs one to another. The investigation also demonstrated that the electrode module can work properly without any skin preparation. Finger movement detection experiments showed that each finger movement was more clearly detectable when comparing to EMGs recorded with conventional electrodes, suggesting that the Laplacian electrode module is more suitable for detecting the timing of finger movement during typing. This could be because the Laplacian configuration enables us to record EMGs just beneath the electrode. These results demonstrate the advantages of the Laplacian electrode module.

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

A haptic interface for virtual simulation of endoscopic surgery.

Science.gov (United States)

Rosenberg, L B; Stredney, D

1996-01-01

Virtual reality can be described as a convincingly realistic and naturally interactive simulation in which the user is given a first person illusion of being immersed within a computer generated environment While virtual reality systems offer great potential to reduce the cost and increase the quality of medical training, many technical challenges must be overcome before such simulation platforms offer effective alternatives to more traditional training means. A primary challenge in developing effective virtual reality systems is designing the human interface hardware which allows rich sensory information to be presented to users in natural ways. When simulating a given manual procedure, task specific human interface requirements dictate task specific human interface hardware. The following paper explores the design of human interface hardware that satisfies the task specific requirements of virtual reality simulation of Endoscopic surgical procedures. Design parameters were derived through direct cadaver studies and interviews with surgeons. Final hardware design is presented.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

Energy Technology Data Exchange (ETDEWEB)

O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

Intelligent Context-Aware and Adaptive Interface for Mobile LBS.

Science.gov (United States)

Feng, Jiangfan; Liu, Yanhong

2015-01-01

Context-aware user interface plays an important role in many human-computer Interaction tasks of location based services. Although spatial models for context-aware systems have been studied extensively, how to locate specific spatial information for users is still not well resolved, which is important in the mobile environment where location based services users are impeded by device limitations. Better context-aware human-computer interaction models of mobile location based services are needed not just to predict performance outcomes, such as whether people will be able to find the information needed to complete a human-computer interaction task, but to understand human processes that interact in spatial query, which will in turn inform the detailed design of better user interfaces in mobile location based services. In this study, a context-aware adaptive model for mobile location based services interface is proposed, which contains three major sections: purpose, adjustment, and adaptation. Based on this model we try to describe the process of user operation and interface adaptation clearly through the dynamic interaction between users and the interface. Then we show how the model applies users' demands in a complicated environment and suggested the feasibility by the experimental results.

Human-Centred Computing for Assisting Nuclear Safeguards

International Nuclear Information System (INIS)

Szoke, I.

2015-01-01

With the rapid evolution of enabling hardware and software, technologies including 3D simulation, virtual reality (VR), augmented reality (AR), advanced user interfaces (UI), and geographical information systems (GIS) are increasingly employed in many aspects of modern life. In line with this, the nuclear industry is rapidly adopting emerging technologies to improve efficiency and safety by supporting planning and optimization of maintenance and decommissioning work, as well as for knowledge management, surveillance, training and briefing field operatives, education, etc. For many years, the authors have been involved in research and development (R&D) into the application of 3D simulation, VR, and AR, for mobile, desktop, and immersive 3D systems, to provide a greater sense of presence and situation awareness, for training, briefing, and in situ work by field operators. This work has resulted in a unique software base and experience (documented in numerous reports) from evaluating the effects of the design of training programmes and briefing sessions on human performance and training efficiency when applying various emerging technologies. In addition, the authors are involved in R&D into the use of 3D simulation, advanced UIs, mobile computing, and GIS systems to support realistic visualization of the combined radiological and geographical environment, as well as acquisition, analyzes, visualization and sharing of radiological and other data, within nuclear installations and their surroundings. The toolkit developed by the authors, and the associated knowledge base, has been successfully applied to various aspects of the nuclear industry, and has great potential within the safeguards domain. It can be used to train safeguards inspectors, brief inspectors before inspections, assist inspectors in situ (data registration, analyzes, and communication), support the design and verification of safeguards systems, conserve data and experience, educate future safeguards

Evolution of the CANDU control centre retrofit and new stations

International Nuclear Information System (INIS)

Olmstead, R.A.; Mitchell, W.

1991-01-01

Significant event data from operating nuclear plants in many countries consistently indicates human errors are the root cause for 40-60% of operating station significant events. Because so much information is already in digital form, opportunities exist to improve the CANDU control centre with retrofits that exploit this information. These opportunities are enhanced because of rapid technological development in computers and electronics, coupled with significant progress in the behavioural sciences that greatly increases our knowledge of the cognitive strengths and weaknesses of human beings. CANDU control rooms are undergoing retrofits and for future CANDU stations, a new concept of the control centre is emerging. The objective is to significantly reduce the incidence of human error, reduce operations and maintenance costs and improve both reliability and safety

Evolution of the CANDU control centre retrofit and new stations

Energy Technology Data Exchange (ETDEWEB)

Olmstead, R A [AECL-CANDU, ON (Canada); Mitchell, W [Ontario Hydro, Darlington Nuclear Generating Station, Bowmanville, ON (Canada)

1991-04-01

Significant event data from operating nuclear plants in many countries consistently indicates human errors are the root cause for 40-60% of operating station significant events. Because so much information is already in digital form, opportunities exist to improve the CANDU control centre with retrofits that exploit this information. These opportunities are enhanced because of rapid technological development in computers and electronics, coupled with significant progress in the behavioural sciences that greatly increases our knowledge of the cognitive strengths and weaknesses of human beings. CANDU control rooms are undergoing retrofits and for future CANDU stations, a new concept of the control centre is emerging. The objective is to significantly reduce the incidence of human error, reduce operations and maintenance costs and improve both reliability and safety.

Minireview: Epigenetics of obesity and diabetes in humans.

Science.gov (United States)

Slomko, Howard; Heo, Hye J; Einstein, Francine H

2012-03-01

Understanding the determinants of human health and disease is overwhelmingly complex, particularly for common, late-onset, chronic disorders, such as obesity and diabetes. Elucidating the genetic and environmental factors that influence susceptibility to disruptions in energy homeostasis and metabolic regulation remain a challenge, and progress will entail the integration of multiple assessments of temporally dynamic environmental exposures in the context of each individual's genotype. To meet this challenge, researchers are increasingly exploring the epigenome, which is the malleable interface of gene-environment interactions. Epigenetic variation, whether innate or induced, contributes to variation in gene expression, the range of potential individual responses to internal and external cues, and risk for metabolic disease. Ultimately, advancement in our understanding of chronic disease susceptibility in humans will depend on refinement of exposure assessment tools and systems biology approaches to interpretation. In this review, we present recent progress in epigenetics of human obesity and diabetes, existing challenges, and the potential for new approaches to unravel the complex biology of metabolic dysregulation.

Some aspects of digital I and C and digital human-system interface upgrades in nuclear power plants

International Nuclear Information System (INIS)

Mandic, D.

2005-01-01

Digital I and C technology introduces some new terms and new processes like software life cycle, process computer configuration control, digital human-system interface (HSI), software V and V (Verification and Validation), software common mode failure potential, software documentation, etc. Based on the experience from NEK, and other NPPs and published reports from other organizations, this paper sheds light on challenging tasks related to some aspects of the digital I and C upgrades and especially the NPP MCR/MCB HSI (Nuclear Power Plant Main Control Room / Main Control Board Human-System Interface) upgrade. The Ref. [1], EPRI Report TR-1008122 was used as a guidance to analyze original NEK MCR/MCB HSI design (1970s), to describe migration from the original MCR/MCB HSI design to the 2005 AS-BUILT status and to propose the authors vision for the key planning aspects for I and C upgrades and MCR modernization. This paper submits the justified proposal for the endpoint vision and the migration path applicable to NEK MCR/MCB HSI modernization, as well as some of the possible risks and lessons learned. (author)

Patient participation in the medical specialist encounter: does physicians' patient-centred communication matter?

NARCIS (Netherlands)

Zandbelt, Linda C.; Smets, Ellen M. A.; Oort, Frans J.; Godfried, Mieke H.; de Haes, Hanneke C. J. M.

2007-01-01

OBJECTIVE: Physicians' patient-centred communication is assumed to stimulate patients' active participation, thus leading to more effective and humane exchange in the medical consultation. We investigated the relationship between physicians' patient-centred communication and patient participation in

Study of interfaces in organic semiconductor heterojunctions

International Nuclear Information System (INIS)

Maheshwari, P; Dutta, D; Sudarshan, K; Sharma, S K; Pujari, P K; Samanta, S; Singh, A; Aswal, D K

2011-01-01

The defect structure at the organic heterojunctions is studied using slow positron beam. The structural and electronic properties of heterojunctions are of technological and fundamental importance for understanding and optimization of electronic processes in organic devices. Interface trap centres play a significant role in the electrical conduction through the junctions. Depth dependent Doppler broadened annihilation measurements have been carried out in p- and n-type organic semiconductor thin films (30-80 nm) both single as well as multilayers grown on quartz substrate. The objective of the present study is to investigate the defect structure and to understand the behavior of positrons at the charged organic interfaces. Our result shows the sensitivity of positrons to the interfacial disorders that may be a convoluted effect of the presence of defects as well as the influence of the charge dipole in multilayers.

Human-machine interface software package

International Nuclear Information System (INIS)

Liu, D.K.; Zhang, C.Z.

1992-01-01

The Man-Machine Interface software Package (MMISP) is designed to configure the console software of PLS 60 Mev LINAC control system. The control system of PLS 60 Mev LINAC is a distributed control system which includes the main computer (Intel 310) four local station, and two sets of industrial level console computer. The MMISP provides the operator with the display page editor, various I/O configuration such as digital signals In/Out, analog signal In/Out, waveform TV graphic display, and interactive with operator through graphic picture display, voice explanation, and touch panel. This paper describes its function and application. (author)

Integrated multimodal human-computer interface and augmented reality for interactive display applications

Science.gov (United States)

Vassiliou, Marius S.; Sundareswaran, Venkataraman; Chen, S.; Behringer, Reinhold; Tam, Clement K.; Chan, M.; Bangayan, Phil T.; McGee, Joshua H.

2000-08-01

We describe new systems for improved integrated multimodal human-computer interaction and augmented reality for a diverse array of applications, including future advanced cockpits, tactical operations centers, and others. We have developed an integrated display system featuring: speech recognition of multiple concurrent users equipped with both standard air- coupled microphones and novel throat-coupled sensors (developed at Army Research Labs for increased noise immunity); lip reading for improving speech recognition accuracy in noisy environments, three-dimensional spatialized audio for improved display of warnings, alerts, and other information; wireless, coordinated handheld-PC control of a large display; real-time display of data and inferences from wireless integrated networked sensors with on-board signal processing and discrimination; gesture control with disambiguated point-and-speak capability; head- and eye- tracking coupled with speech recognition for 'look-and-speak' interaction; and integrated tetherless augmented reality on a wearable computer. The various interaction modalities (speech recognition, 3D audio, eyetracking, etc.) are implemented a 'modality servers' in an Internet-based client-server architecture. Each modality server encapsulates and exposes commercial and research software packages, presenting a socket network interface that is abstracted to a high-level interface, minimizing both vendor dependencies and required changes on the client side as the server's technology improves.

Affective Man-Machine Interface: Unveiling Human Emotions through Biosignals

Science.gov (United States)

van den Broek, Egon L.; Lisý, Viliam; Janssen, Joris H.; Westerink, Joyce H. D. M.; Schut, Marleen H.; Tuinenbreijer, Kees

As is known for centuries, humans exhibit an electrical profile. This profile is altered through various psychological and physiological proce-sses, which can be measured through biosignals; e.g., electromyography (EMG) and electrodermal activity (EDA). These biosignals can reveal our emotions and, as such, can serve as an advanced man-machine interface (MMI) for empathic consumer products. However, such a MMI requires the correct classification of biosignals to emotion classes. This chapter starts with an introduction on biosignals for emotion detection. Next, a state-of-the-art review is presented on automatic emotion classification. Moreover, guidelines are presented for affective MMI. Subsequently, a research is presented that explores the use of EDA and three facial EMG signals to determine neutral, positive, negative, and mixed emotions, using recordings of 21 people. A range of techniques is tested, which resulted in a generic framework for automated emotion classification with up to 61.31% correct classification of the four emotion classes, without the need of personal profiles. Among various other directives for future research, the results emphasize the need for parallel processing of multiple biosignals.

Rapid population growth and environmental degradation: ultimate versus proximate factors.

Science.gov (United States)

Shaw, R P

1989-01-01

This philosophical review of 2 arguments about responsibility for and solutions to environmental degradation concludes that both sides are correct: the ultimate and the proximal causes. Ultimate causes of pollution are defined as the technology responsible for a given type of pollution, such as burning fossil fuel; proximate causes are defined as situation-specific factors confounding the problem, such as population density or rate of growth. Commoner and others argue that developed countries with low or negative population growth rates are responsible for 80% of world pollution, primarily in polluting technologies such as automobiles, power generation, plastics, pesticides, toxic wastes, garbage, warfaring, and nuclear weapons wastes. Distortionary policies also contribute; examples are agricultural trade protection, land mismanagement, urban bias in expenditures, and institutional rigidity., Poor nations are responsible for very little pollution because poverty allows little waste or expenditures for polluting, synthetic technologies. The proximal causes of pollution include numbers and rate of growth of populations responsible for the pollution. Since change in the ultimate cause of pollution remains out of reach, altering the numbers of polluters can make a difference. Predictions are made for proportions of the world's total waste production, assuming current 1.6 tons/capita for developed countries and 0.17 tons/capita for developing countries. If developing countries grow at current rates and become more wealthy, they will be emitting half the world's waste by 2025. ON the other hand, unsustainable population growth goes along with inadequate investment in human capital: education, health, employment, infrastructure. The solution is to improve farming technologies in the 117 non-self-sufficient countries, fund development in the most unsustainable enclaves of growing countries, break institutionalized socio-political rigidity in these enclaves, and focus on

The ultimate disposition of depleted uranium

Energy Technology Data Exchange (ETDEWEB)

1990-12-01

Significant amounts of the depleted uranium (DU) created by past uranium enrichment activities have been sold, disposed of commercially, or utilized by defense programs. In recent years, however, the demand for DU has become quite small compared to quantities available, and within the US Department of Energy (DOE) there is concern for any risks and/or cost liabilities that might be associated with the ever-growing inventory of this material. As a result, Martin Marietta Energy Systems, Inc. (Energy Systems), was asked to review options and to develop a comprehensive plan for inventory management and the ultimate disposition of DU accumulated at the gaseous diffusion plants (GDPs). An Energy Systems task team, under the chairmanship of T. R. Lemons, was formed in late 1989 to provide advice and guidance for this task. This report reviews options and recommends actions and objectives in the management of working inventories of partially depleted feed (PDF) materials and for the ultimate disposition of fully depleted uranium (FDU). Actions that should be considered are as follows. (1) Inspect UF{sub 6} cylinders on a semiannual basis. (2) Upgrade cylinder maintenance and storage yards. (3) Convert FDU to U{sub 3}O{sub 8} for long-term storage or disposal. This will include provisions for partial recovery of costs to offset those associated with DU inventory management and the ultimate disposal of FDU. Another recommendation is to drop the term tails'' in favor of depleted uranium'' or DU'' because the tails'' label implies that it is waste.'' 13 refs.

Risk Issues in Developing Novel User Interfaces for Human-Computer Interaction

KAUST Repository

Klinker, Gudrun; Huber, Manuel; Tö nnis, Marcus

2014-01-01

© 2014 Springer International Publishing Switzerland. All rights are reserved. When new user interfaces or information visualization schemes are developed for complex information processing systems, it is not readily clear how much they do, in fact, support and improve users' understanding and use of such systems. Is a new interface better than an older one? In what respect, and in which situations? To provide answers to such questions, user testing schemes are employed. This chapter reports on a range of risks pertaining to the design and implementation of user interfaces in general, and to newly emerging interfaces (3-dimensionally, immersive, mobile) in particular.

Risk Issues in Developing Novel User Interfaces for Human-Computer Interaction

KAUST Repository

Klinker, Gudrun

2014-01-01

© 2014 Springer International Publishing Switzerland. All rights are reserved. When new user interfaces or information visualization schemes are developed for complex information processing systems, it is not readily clear how much they do, in fact, support and improve users\\' understanding and use of such systems. Is a new interface better than an older one? In what respect, and in which situations? To provide answers to such questions, user testing schemes are employed. This chapter reports on a range of risks pertaining to the design and implementation of user interfaces in general, and to newly emerging interfaces (3-dimensionally, immersive, mobile) in particular.

ADVANCED MMIS TOWARD SUBSTANTIAL REDUCTION IN HUMAN ERRORS IN NPPS

Directory of Open Access Journals (Sweden)

POONG HYUN SEONG

2013-04-01

Full Text Available This paper aims to give an overview of the methods to inherently prevent human errors and to effectively mitigate the consequences of such errors by securing defense-in-depth during plant management through the advanced man-machine interface system (MMIS. It is needless to stress the significance of human error reduction during an accident in nuclear power plants (NPPs. Unexpected shutdowns caused by human errors not only threaten nuclear safety but also make public acceptance of nuclear power extremely lower. We have to recognize there must be the possibility of human errors occurring since humans are not essentially perfect particularly under stressful conditions. However, we have the opportunity to improve such a situation through advanced information and communication technologies on the basis of lessons learned from our experiences. As important lessons, authors explained key issues associated with automation, man-machine interface, operator support systems, and procedures. Upon this investigation, we outlined the concept and technical factors to develop advanced automation, operation and maintenance support systems, and computer-based procedures using wired/wireless technology. It should be noted that the ultimate responsibility of nuclear safety obviously belongs to humans not to machines. Therefore, safety culture including education and training, which is a kind of organizational factor, should be emphasized as well. In regard to safety culture for human error reduction, several issues that we are facing these days were described. We expect the ideas of the advanced MMIS proposed in this paper to lead in the future direction of related researches and finally supplement the safety of NPPs.

Advanced MMIS Toward Substantial Reduction in Human Errors in NPPs

Energy Technology Data Exchange (ETDEWEB)

Seong, Poong Hyun; Kang, Hyun Gook [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Na, Man Gyun [Chosun Univ., Gwangju (Korea, Republic of); Kim, Jong Hyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Heo, Gyunyoung [Kyung Hee Univ., Yongin (Korea, Republic of); Jung, Yoensub [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of)

2013-04-15

This paper aims to give an overview of the methods to inherently prevent human errors and to effectively mitigate the consequences of such errors by securing defense-in-depth during plant management through the advanced man-machine interface system (MMIS). It is needless to stress the significance of human error reduction during an accident in nuclear power plants (NPPs). Unexpected shutdowns caused by human errors not only threaten nuclear safety but also make public acceptance of nuclear power extremely lower. We have to recognize there must be the possibility of human errors occurring since humans are not essentially perfect particularly under stressful conditions. However, we have the opportunity to improve such a situation through advanced information and communication technologies on the basis of lessons learned from our experiences. As important lessons, authors explained key issues associated with automation, man-machine interface, operator support systems, and procedures. Upon this investigation, we outlined the concept and technical factors to develop advanced automation, operation and maintenance support systems, and computer-based procedures using wired/wireless technology. It should be noted that the ultimate responsibility of nuclear safety obviously belongs to humans not to machines. Therefore, safety culture including education and training, which is a kind of organizational factor, should be emphasized as well. In regard to safety culture for human error reduction, several issues that we are facing these days were described. We expect the ideas of the advanced MMIS proposed in this paper to lead in the future direction of related researches and finally supplement the safety of NPPs.

Advanced MMIS Toward Substantial Reduction in Human Errors in NPPs

International Nuclear Information System (INIS)

Seong, Poong Hyun; Kang, Hyun Gook; Na, Man Gyun; Kim, Jong Hyun; Heo, Gyunyoung; Jung, Yoensub

2013-01-01

This paper aims to give an overview of the methods to inherently prevent human errors and to effectively mitigate the consequences of such errors by securing defense-in-depth during plant management through the advanced man-machine interface system (MMIS). It is needless to stress the significance of human error reduction during an accident in nuclear power plants (NPPs). Unexpected shutdowns caused by human errors not only threaten nuclear safety but also make public acceptance of nuclear power extremely lower. We have to recognize there must be the possibility of human errors occurring since humans are not essentially perfect particularly under stressful conditions. However, we have the opportunity to improve such a situation through advanced information and communication technologies on the basis of lessons learned from our experiences. As important lessons, authors explained key issues associated with automation, man-machine interface, operator support systems, and procedures. Upon this investigation, we outlined the concept and technical factors to develop advanced automation, operation and maintenance support systems, and computer-based procedures using wired/wireless technology. It should be noted that the ultimate responsibility of nuclear safety obviously belongs to humans not to machines. Therefore, safety culture including education and training, which is a kind of organizational factor, should be emphasized as well. In regard to safety culture for human error reduction, several issues that we are facing these days were described. We expect the ideas of the advanced MMIS proposed in this paper to lead in the future direction of related researches and finally supplement the safety of NPPs

Towards Modern Inclusive Factories: A Methodology for the Development of Smart Adaptive Human-Machine Interfaces

OpenAIRE

Villani, Valeria; Sabattini, Lorenzo; Czerniak, Julia N.; Mertens, Alexander; Vogel-Heuser, Birgit; Fantuzzi, Cesare

2017-01-01

Modern manufacturing systems typically require high degrees of flexibility, in terms of ability to customize the production lines to the constantly changing market requests. For this purpose, manufacturing systems are required to be able to cope with changes in the types of products, and in the size of the production batches. As a consequence, the human-machine interfaces (HMIs) are typically very complex, and include a wide range of possible operational modes and commands. This generally imp...

Intelligent Context-Aware and Adaptive Interface for Mobile LBS

Directory of Open Access Journals (Sweden)

Jiangfan Feng

2015-01-01

Full Text Available Context-aware user interface plays an important role in many human-computer Interaction tasks of location based services. Although spatial models for context-aware systems have been studied extensively, how to locate specific spatial information for users is still not well resolved, which is important in the mobile environment where location based services users are impeded by device limitations. Better context-aware human-computer interaction models of mobile location based services are needed not just to predict performance outcomes, such as whether people will be able to find the information needed to complete a human-computer interaction task, but to understand human processes that interact in spatial query, which will in turn inform the detailed design of better user interfaces in mobile location based services. In this study, a context-aware adaptive model for mobile location based services interface is proposed, which contains three major sections: purpose, adjustment, and adaptation. Based on this model we try to describe the process of user operation and interface adaptation clearly through the dynamic interaction between users and the interface. Then we show how the model applies users’ demands in a complicated environment and suggested the feasibility by the experimental results.

Assessment and characterization of radioactive waste for ultimate storage

International Nuclear Information System (INIS)

Brennecke, P.; Warnecke, E.

1986-01-01

The waste specifications determined from site safety analyses define the requirements to be met by waste forms for ultimate storage. Product quality control is the process step ensuring compliance with the conditions to be met for ultimate storage. For this purpose, radionuclide inventory, fixation method, container type, waste form and quantity, and type of waste are the most significant items on the checking list. (DG) [de

Conversational module-based simulation system as a human interface to versatile dynamic simulation of nuclear power plant

International Nuclear Information System (INIS)

Yoshikawa, H.; Nakaya, K.; Wakabayashi, J.

1986-01-01

A new conversational simulation system is proposed which aims at effective re-utilization of software resources as module database, and conducting versatile simulations easily by automatic module integration with the help of user-friendly interfaces. The whole simulation system is composed of the four parts: master module library and pre-compiler system as the core system, while module database management system and simulation execution support system for the user interfaces. Basic methods employed in the system are mentioned with their knowledge representation and the relationship with the human information processing. An example practice of an LMFBR reactor dynamic simulation by the system demonstrated its capability to integrate a large simulation program and the related input/output files automatically by a single user

7 CFR 4280.21 - Eligible REDG Ultimate Recipients and Projects.

Science.gov (United States)

2010-01-01

... care providers; (5) Projects that utilize Advanced Telecommunications or computer networks to... 7 Agriculture 15 2010-01-01 2010-01-01 false Eligible REDG Ultimate Recipients and Projects. 4280... Economic Development Loan and Grant Programs § 4280.21 Eligible REDG Ultimate Recipients and Projects. The...

Quantifying effects of humans and climate on groundwater resources of Hawaii through sharp-interface modeling

Science.gov (United States)

Rotzoll, K.; Izuka, S. K.; Nishikawa, T.; Fienen, M. N.; El-Kadi, A. I.

2016-12-01

Some of the volcanic-rock aquifers of the islands of Hawaii are substantially developed, leading to concerns related to the effects of groundwater withdrawals on saltwater intrusion and stream base-flow reduction. A numerical modeling analysis using recent available information (e.g., recharge, withdrawals, hydrogeologic framework, and conceptual models of groundwater flow) advances current understanding of groundwater flow and provides insight into the effects of human activity and climate change on Hawaii's water resources. Three island-wide groundwater-flow models (Kauai, Oahu, and Maui) were constructed using MODFLOW 2005 coupled with the Seawater-Intrusion Package (SWI2), which simulates the transition between saltwater and freshwater in the aquifer as a sharp interface. This approach allowed coarse vertical discretization (maximum of two layers) without ignoring the freshwater-saltwater system at the regional scale. Model construction (FloPy3), parameter estimation (PEST), and analysis of results were streamlined using Python scripts. Model simulations included pre-development (1870) and recent (average of 2001-10) scenarios for each island. Additionally, scenarios for future withdrawals and climate change were simulated for Oahu. We present our streamlined approach and results showing estimated effects of human activity on the groundwater resource by quantifying decline in water levels, rise of the freshwater-saltwater interface, and reduction in stream base flow. Water-resource managers can use this information to evaluate consequences of groundwater development that can constrain future groundwater availability.

Influence of initial imperfections on ultimate strength of spherical shells

Directory of Open Access Journals (Sweden)

Chang-Li Yu

2017-09-01

Full Text Available Comprehensive consideration regarding influence mechanisms of initial imperfections on ultimate strength of spherical shells is taken to satisfy requirement of deep-sea structural design. The feasibility of innovative numerical procedure that combines welding simulation and non-linear buckling analysis is verified by a good agreement to experimental and theoretical results. Spherical shells with a series of wall thicknesses to radius ratios are studied. Residual stress and deformations from welding process are investigated separately. Variant influence mechanisms are discovered. Residual stress is demonstrated to be influential to stress field and buckling behavior but not to the ultimate strength. Deformations are proved to have a significant impact on ultimate strength. When central angles are less than critical value, concave magnitudes reduce ultimate strengths linearly. However, deformations with central angles above critical value are of much greater harm. Less imperfection susceptibility is found in spherical shells with larger wall thicknesses to radius ratios.

A Theoretical Framework for Ecological Interface Design

DEFF Research Database (Denmark)

Vicente, Kim J.; Rasmussen, Jens

1988-01-01

A theoretical framework for designing interfaces for complex systems is de-scribed. The framework, called ecological interface design (EID), suggests a set of principles for designing interfaces in a way that supports the funda-mental properties of human cognition. The basis of EID is the skills...... of the task require. The EID approach extends the concept of direct manipulation inter-faces by taking into account the added complications introduced by complex systems. In this paper, we describe the development of the framework, its theoretical foundations, and examples of its application to various work...

Proceedings of the 5. International Topical Meeting on Nuclear Plant Instrumentation Controls, and Human Machine Interface Technology

International Nuclear Information System (INIS)

2006-01-01

Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks. 'Systems

Proceedings of the 5. International Topical Meeting on Nuclear Plant Instrumentation Controls, and Human Machine Interface Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of nuclear power systems. The ICHMI system, together with plant personnel, is the 'central nervous system' for operating plants. It senses basic parameters, monitors performance, integrates information, and makes adjustments to plant operations as necessary. It also responds to failures and off-normal events, thus ensuring goals of efficient power production and safety. The ICHMI system embodies the sensing, communications, monitoring, control, and presentation and command systems between the process (i.e., the reactor, heat transport, and energy conversion systems) and the plant personnel. It enables plant personnel to more effectively monitor the health of the plant and to identify opportunities to improve the performance of equipment and systems as well as to anticipate, understand, and respond to potential problems. Improved controls provide the basis to operate more closely to performance margins, and the improved integration of automatic and human response enables them to work cooperatively to accomplish production and safety goals. The ICHMI system thus directly impacts the performance of the entire plant and thereby the economics, safety, and security of current and future reactor designs. The 5. International Topical Meeting on Nuclear Plant Instrumentation Control and Human-Machine Interface Technology (NPIC and HMIT 2006) is specifically devoted to advances in these important technologies. In these proceedings, more than 200 papers and panel sessions from all over the world have been assembled to share the most recent information and innovations in ICHMI technology and to discuss the important issues that face the future of the industry. The papers fall into two major groupings: instrumentation and control (I and C) and human-machine interface technology (HMIT). The I and C papers are organized into five tracks

Brain-machine and brain-computer interfaces.

Science.gov (United States)

Friehs, Gerhard M; Zerris, Vasilios A; Ojakangas, Catherine L; Fellows, Mathew R; Donoghue, John P

2004-11-01

The idea of connecting the human brain to a computer or machine directly is not novel and its potential has been explored in science fiction. With the rapid advances in the areas of information technology, miniaturization and neurosciences there has been a surge of interest in turning fiction into reality. In this paper the authors review the current state-of-the-art of brain-computer and brain-machine interfaces including neuroprostheses. The general principles and requirements to produce a successful connection between human and artificial intelligence are outlined and the authors' preliminary experience with a prototype brain-computer interface is reported.

Powering the Future Data Centre

DEFF Research Database (Denmark)

Zhang, Zhe

2010-01-01

of the characteristics of these two power sources: long warm-up stage and low dynamics for fuel cell, and variable terminal voltage for supercapacitors. The motivation for this project was to find ways which can overcome those limitations to integrate fuel cells and supercapcitors to the system with high efficiency......The extended run Uninterruptible Power Supply system (UPSs) which powered by fuel cells and supercapcitors, is a promising solution for future data centre to obtain environmentfriendly energy efficient and cost effective. There are many challenges in power electronic interface circuits, because......: • Optimized design method for dual active bridge (DAB) converter and its derived circuits; • A novel hybrid dc-dc converter and its corresponding optimal design method are proposed; • An improved dual input current-fed DC-DC converter with bidirectional power conversion ability is investigated; • Extend...

Ultimate pressure capacity of CANDU 6 containment structures

International Nuclear Information System (INIS)

Radulescu, J.P.; Pradolin, L.; Mamet, J.C.

1997-01-01

This paper summarizes the analytical work carried out and the results obtained when determining the ultimate pressure capacity (UPC) of the containment structures of CANDU 6 nuclear power plants. The purpose of the analysis work was to demonstrate that such containment structures are capable of meeting design requirements under the most severe accident conditions. For this concrete vessel subjected to internal pressure, the UPC was defined as the pressure causing through cracking in the concrete. The present paper deals with the overall behaviour of the containment. The presence of openings, penetrations and the ultimate pressure of the airlocks were considered separately. (author)

Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

Energy Technology Data Exchange (ETDEWEB)

Carter, R.J.

1997-07-01

This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such

Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

International Nuclear Information System (INIS)

Carter, R.J.

1997-07-01

This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

International Nuclear Information System (INIS)

Callan, J.R.; Kelly, R.T.; Quinn, M.L.

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Callan, J.R.; Kelly, R.T.; Quinn, M.L. [Pacific Science & Engineering Group, San Diego, CA (United States)] [and others

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated.

Corporate sustainability: the environmental design and human resource management interface in healthcare settings.

Science.gov (United States)

Sadatsafavi, Hessam; Walewski, John

2013-01-01

Purpose of the Paper: The purpose of this study is to provide healthcare organizations with a new perspective for developing strategies to enrich their human resource capabilities and improve their performance outcomes. The focus of this study is on leveraging the synergy between organizational management strategies and environmental design interventions. This paper proposes a framework for linking the built environment with the human resource management system of healthcare organizations. The framework focuses on the impact of the built environment regarding job attitudes and behaviors of healthcare workers. Research from the disciplines of strategic human resource management, resource-based view of firms, evidence-based design, and green building are utilized to develop the framework. The positive influence of human resource practices on job attitudes and behaviors of employees is one mechanism to improve organizational performance outcomes. Organizational psychologists suggest that human resource practices are effective because they convey that the organization values employee contributions and cares about their well-being. Attention to employee socio-emotional needs can be reciprocated with higher levels of motivation and commitment toward the organization. In line with these findings, healthcare environmental studies imply that physical settings and features can have a positive influence on job attitudes and the behavior of caregivers by providing for their physical and socio-emotional needs. Adding the physical environment as a complementary resource to the array of human resource practices creates synergy in improving caregivers' job attitudes and behaviors and enhances the human capital of healthcare firms. Staff, evidence-based design, interdisciplinary, modeling, perceived organizational supportPreferred Citation: Sadatsafavi, H., & Walewski, J. (2013). Corporate sustainability: The environmental design and human resource management interface in

Precision wildlife medicine: applications of the human-centred precision medicine revolution to species conservation.

Science.gov (United States)

Whilde, Jenny; Martindale, Mark Q; Duffy, David J

2017-05-01

The current species extinction crisis is being exacerbated by an increased rate of emergence of epizootic disease. Human-induced factors including habitat degradation, loss of biodiversity and wildlife population reductions resulting in reduced genetic variation are accelerating disease emergence. Novel, efficient and effective approaches are required to combat these epizootic events. Here, we present the case for the application of human precision medicine approaches to wildlife medicine in order to enhance species conservation efforts. We consider how the precision medicine revolution, coupled with the advances made in genomics, may provide a powerful and feasible approach to identifying and treating wildlife diseases in a targeted, effective and streamlined manner. A number of case studies of threatened species are presented which demonstrate the applicability of precision medicine to wildlife conservation, including sea turtles, amphibians and Tasmanian devils. These examples show how species conservation could be improved by using precision medicine techniques to determine novel treatments and management strategies for the specific medical conditions hampering efforts to restore population levels. Additionally, a precision medicine approach to wildlife health has in turn the potential to provide deeper insights into human health and the possibility of stemming and alleviating the impacts of zoonotic diseases. The integration of the currently emerging Precision Medicine Initiative with the concepts of EcoHealth (aiming for sustainable health of people, animals and ecosystems through transdisciplinary action research) and One Health (recognizing the intimate connection of humans, animal and ecosystem health and addressing a wide range of risks at the animal-human-ecosystem interface through a coordinated, collaborative, interdisciplinary approach) has great potential to deliver a deeper and broader interdisciplinary-based understanding of both wildlife and human

South African sign language human-computer interface in the context of the national accessibility portal

CSIR Research Space (South Africa)

Olivrin, GJ

2006-02-01

Full Text Available example, between a deaf person who can sign and an able person or a person with a different disability who cannot sign). METHODOLOGY A signing avatar is set up to work together with a chatterbot. The chatterbot is a natural language dialogue interface... are then offered in sign language as the replies are interpreted by a signing avatar, a living character that can reproduce human-like gestures and expressions. To make South African Sign Language (SASL) available digitally, computational models of the language...

Ultrasensitive and Highly Stable Resistive Pressure Sensors with Biomaterial-Incorporated Interfacial Layers for Wearable Health-Monitoring and Human-Machine Interfaces.

Science.gov (United States)

Chang, Hochan; Kim, Sungwoong; Jin, Sumin; Lee, Seung-Woo; Yang, Gil-Tae; Lee, Ki-Young; Yi, Hyunjung

2018-01-10

Flexible piezoresistive sensors have huge potential for health monitoring, human-machine interfaces, prosthetic limbs, and intelligent robotics. A variety of nanomaterials and structural schemes have been proposed for realizing ultrasensitive flexible piezoresistive sensors. However, despite the success of recent efforts, high sensitivity within narrower pressure ranges and/or the challenging adhesion and stability issues still potentially limit their broad applications. Herein, we introduce a biomaterial-based scheme for the development of flexible pressure sensors that are ultrasensitive (resistance change by 5 orders) over a broad pressure range of 0.1-100 kPa, promptly responsive (20 ms), and yet highly stable. We show that employing biomaterial-incorporated conductive networks of single-walled carbon nanotubes as interfacial layers of contact-based resistive pressure sensors significantly enhances piezoresistive response via effective modulation of the interlayer resistance and provides stable interfaces for the pressure sensors. The developed flexible sensor is capable of real-time monitoring of wrist pulse waves under external medium pressure levels and providing pressure profiles applied by a thumb and a forefinger during object manipulation at a low voltage (1 V) and power consumption (<12 μW). This work provides a new insight into the material candidates and approaches for the development of wearable health-monitoring and human-machine interfaces.

Virtual interface environment workstations

Science.gov (United States)

Fisher, S. S.; Wenzel, E. M.; Coler, C.; Mcgreevy, M. W.

1988-01-01

A head-mounted, wide-angle, stereoscopic display system controlled by operator position, voice and gesture has been developed at NASA's Ames Research Center for use as a multipurpose interface environment. This Virtual Interface Environment Workstation (VIEW) system provides a multisensory, interactive display environment in which a user can virtually explore a 360-degree synthesized or remotely sensed environment and can viscerally interact with its components. Primary applications of the system are in telerobotics, management of large-scale integrated information systems, and human factors research. System configuration, research scenarios, and research directions are described.

Ultimate guide to YouTube for business

CERN Document Server

2018-01-01

Ultimate Guide to YouTube for Business helps small business owners create marketing videos to help promote their products, share their story, build a community around their brand without spending a fortune-all the while making money.

The science behind One Health: at the interface of humans, animals, and the environment.

Science.gov (United States)

Murtaugh, Michael P; Steer, Clifford J; Sreevatsan, Srinand; Patterson, Ned; Kennedy, Shaun; Sriramarao, P

2017-05-01

Humans face a grand quality-of-life challenge as growing demands for resources for an ever-expanding population threaten the existence of wildlife populations, degrade land, and pollute air and water. Public investment and policy decisions that will shape future interactions of humans, animals, and the environment need scientific input to help find common ground for durable and sustainable success. The Second International Conference on One Medicine One Science brought together a broad range of scientists, trainees, regulatory authorities, and health experts from 34 countries to inform and discuss the human impacts of air quality; the complexities of water quality, access, and conflicts; the opportunities and uncertainties in precision medicine; and the role of science communication in health policy formulation. Workshops focused on the roles and development of physician-scientists and multidisciplinary teams in complex problem solving, Big Data tools for analysis and visualization, international policy development processes, and health models that benefit animals and humans. Key realizations were that local and regional health challenges at the interface of humans, animals, and the environment are variations of the same overarching conflicts and that international gatherings provide new opportunities for investigation and policy development that are broadly applicable. © 2017 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals, Inc. on behalf of New York Academy of Sciences.

Librarians Are the Ultimate Knowledge Managers?

Science.gov (United States)

Koina, Cathie

2003-01-01

Librarians are the ultimate knowledge managers. Everyone knows that. After all, haven't they been the custodians of documented knowledge for centuries? Who could possibly do it better than them? Well, then why aren't people knocking down their doors, begging them to be the knowledge managers of the organisation? Are they just ignorant of how…

Using Ontology to Drive an Adaptive Learning Interface

Directory of Open Access Journals (Sweden)

Andrew Crapo

2004-10-01

Full Text Available Intelligent, adaptive interfaces are a pre-requisite to elevating computer-based applications to the realm of collaborative decision support in complex, relatively open-ended domains such as logistics and planning. This is because the composition and effective presentation of even the most useful information must be tailored to constantly changing circumstances. Our objective is to not only achieve an adaptive human-machine interface, but to imbue the software with a significant portion of the responsibility for effectively controlling the adaptation, freeing the user from unnecessary distraction and making the human-machine relationship more collaborative in nature. The foundational concepts of interface adaptation are discussed and a specific logistics application is described as an example.

Deflection of a vortex pair by an interface in easy-plane ferromagnets

Energy Technology Data Exchange (ETDEWEB)

Caputo, J-G [Laboratoire de Mathematiques, INSA de Rouen, BP 8, 76131 Mont-Saint-Aignan Cedex (France); Zagorodny, J P [Physics Institute, University of Bayreuth, Bayreuth (Germany); Gaididei, Yu [Bogoliubov Institute of Theoretical Physics, Academy of Sciences of Ukraine, Kiev, Ukraine (Ukraine); Mertens, F G [Physics Institute, University of Bayreuth, Bayreuth (Germany)

2003-04-18

We study the motion of a vortex-antivortex pair in easy-plane ferromagnets crossing an interface between two media with different anisotropy. A simple description based on the Thiele approach is obtained. The collective variables are the vortex centres and core radii, the latter are assumed to be slaved to the former. For a normal crossing of the interface by the vortex pair, a simple estimate of the ratio of the separation distances is obtained from energy conservation. This prediction is validated by direct numerical simulations of the Landau-Lifshitz equations for the anisotropic Heisenberg model, on a spin lattice divided into two regions which have different anisotropies.

Trump er gældsøkonomiens ultimative illusionist

DEFF Research Database (Denmark)

Nielsen, Peter

2018-01-01

Trump giver ikke kun gevaldige skattelettelser og nærer en illusion om, at vækst vil løse alle problemer. Han fortrænger også gældsøkonomiens ultimative bundlinje i form af klimaforandringerne.......Trump giver ikke kun gevaldige skattelettelser og nærer en illusion om, at vækst vil løse alle problemer. Han fortrænger også gældsøkonomiens ultimative bundlinje i form af klimaforandringerne....

Lateral strength force of URM structures based on a constitutive model for interface element

Directory of Open Access Journals (Sweden)

A.H. Akhaveissy

Full Text Available This paper presents the numerical implementation of a new proposed interface model for modeling the behavior of mortar joints in masonry walls. Its theoretical framework is fully based on the plasticity theory. The Von Mises criterion is used to simulate the behavior of brick and stone units. The interface laws for contact elements are formulated to simulate the softening behavior of mortar joints under tensile stress; a normal linear cap model is also used to limit compressive stress. The numerical predictions based on the proposed model for the behavior of interface elements correlate very highly with test data. A new explicit formula based on results of proposed interface model is also presented to estimate the strength of unreinforced masonry structures. The closed form solution predicts the ultimate lateral load of unreinforced masonry walls less error percentage than ATC and FEMA-307. Consequently, the proposed closed form solution can be used satisfactorily to analyze unreinforced masonry structures.

Educational attainment and ultimate fertility among Swedish women born in 1955-59

Directory of Open Access Journals (Sweden)

Gerda Neyer

2006-05-01

Full Text Available This is the second of two companion papers addressing the association between educational attainment and fertility for some sixty educational groups of Swedish women, defined according to field of education as well as level of education. The first paper is about childlessness and education, the present one about the mean number of children ever born. We find that ultimate fertility decreases somewhat with an increasing educational level, but its dependence on the field of education is much more impressive. In general, educational groups with relatively little childlessness also have relatively high ultimate fertility, and educational groups with much childlessness have relatively low ultimate fertility. In particular, women educated for the teaching or health-care professions have less childlessness and a higher ultimate fertility than others. Conversely, women with an education for esthetic or (non-teacher humanist occupations have unusually high fractions childless and low ultimate fertility. Women with religious educations stand out by having very high fractions childless but quite ordinary mean ultimate fertility nevertheless; such women have very little childbearing outside of marriage. Women with research degrees have remarkably ordinary childbearing behavior; they do not forego motherhood to the extent that some theories would predict.

Coronary CT angiography using 64 detector rows: methods and design of the multi-centre trial CORE-64

Energy Technology Data Exchange (ETDEWEB)

Miller, Julie M.; Vavere, Andrea L.; Arbab-Zadeh, Armin; Bush, David E.; Lardo, Albert C.; Texter, John; Brinker, Jeffery; Lima, Joao A.C. [Johns Hopkins Hospital, Johns Hopkins University, Department of Medicine, Division of Cardiology, Baltimore, MD (United States); Dewey, Marc [Charite - Universitaetsmedizin Berlin, Medical School, Humboldt-Universitaet und Freie Universitaet zu Berlin, Department of Radiology, Berlin, PO Box 10098 (Germany); Rochitte, Carlos E.; Lemos, Pedro A. [University of Sao Paulo Medical School, Heart Institute (InCor), Sao Paulo (Brazil); Niinuma, Hiroyuki [Iwate Medical University, Department of Cardiology, Morioka (Japan); Paul, Narinder [Toronto General Hospital, Department of Medical Imaging, Toronto (Canada); Hoe, John [Medi-Rad Associates Ltd, CT Centre, Mt Elizabeth Hospital, Singapore (Singapore); Roos, Albert de [Leiden University Medical Center, Department of Radiology, Leiden (Netherlands); Yoshioka, Kunihiro [Iwate Medical University, Department of Radiology, Morioka (Japan); Cox, Christopher [Johns Hopkins Bloomberg School of Public Health, Department of Epidemiology, Baltimore, MD (United States); Clouse, Melvin E. [Harvard University, Department of Radiology, Beth Israel Deaconess, Boston, MA (United States)

2009-04-15

Multislice computed tomography (MSCT) for the noninvasive detection of coronary artery stenoses is a promising candidate for widespread clinical application because of its non-invasive nature and high sensitivity and negative predictive value as found in several previous studies using 16 to 64 simultaneous detector rows. A multi-centre study of CT coronary angiography using 16 simultaneous detector rows has shown that 16-slice CT is limited by a high number of nondiagnostic cases and a high false-positive rate. A recent meta-analysis indicated a significant interaction between the size of the study sample and the diagnostic odds ratios suggestive of small study bias, highlighting the importance of evaluating MSCT using 64 simultaneous detector rows in a multi-centre approach with a larger sample size. In this manuscript we detail the objectives and methods of the prospective ''CORE-64'' trial (''Coronary Evaluation Using Multidetector Spiral Computed Tomography Angiography using 64 Detectors''). This multi-centre trial was unique in that it assessed the diagnostic performance of 64-slice CT coronary angiography in nine centres worldwide in comparison to conventional coronary angiography. In conclusion, the multi-centre, multi-institutional and multi-continental trial CORE-64 has great potential to ultimately assess the per-patient diagnostic performance of coronary CT angiography using 64 simultaneous detector rows. (orig.)

Glove-Enabled Computer Operations (GECO): Design and Testing of an Extravehicular Activity Glove Adapted for Human-Computer Interface

Science.gov (United States)

Adams, Richard J.; Olowin, Aaron; Krepkovich, Eileen; Hannaford, Blake; Lindsay, Jack I. C.; Homer, Peter; Patrie, James T.; Sands, O. Scott

2013-01-01

The Glove-Enabled Computer Operations (GECO) system enables an extravehicular activity (EVA) glove to be dual-purposed as a human-computer interface device. This paper describes the design and human participant testing of a right-handed GECO glove in a pressurized glove box. As part of an investigation into the usability of the GECO system for EVA data entry, twenty participants were asked to complete activities including (1) a Simon Says Games in which they attempted to duplicate random sequences of targeted finger strikes and (2) a Text Entry activity in which they used the GECO glove to enter target phrases in two different virtual keyboard modes. In a within-subjects design, both activities were performed both with and without vibrotactile feedback. Participants mean accuracies in correctly generating finger strikes with the pressurized glove were surprisingly high, both with and without the benefit of tactile feedback. Five of the subjects achieved mean accuracies exceeding 99 in both conditions. In Text Entry, tactile feedback provided a statistically significant performance benefit, quantified by characters entered per minute, as well as reduction in error rate. Secondary analyses of responses to a NASA Task Loader Index (TLX) subjective workload assessments reveal a benefit for tactile feedback in GECO glove use for data entry. This first-ever investigation of employment of a pressurized EVA glove for human-computer interface opens up a wide range of future applications, including text chat communications, manipulation of procedureschecklists, cataloguingannotating images, scientific note taking, human-robot interaction, and control of suit andor other EVA systems.

Coupled Fluid-Solid Interaction Under Shock Wave Loading: Part II - Dynamic Interfaces

Energy Technology Data Exchange (ETDEWEB)

Tipton, David Gregory [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Christon, Mark Allen [CTO Offce, Dassault Systµemes SIMULIA, Providence, RI (United States); Ingber, Marc Stuart [Univ. of New Mexico, Albuquerque, NM (United States). Department of Mechanical Engineering

2009-07-01

This article is the second of two that consider the treatment of fluid-solid interaction problems where the solid experiences wave loading and large bulk Lagrangian displacements. In part-I, we presented the formulation for the edge-based unstructured-grid Euler solver in the context of a discontinuous- Galerkin framework with the extensions used to treat internal fluid-solid interfaces. A super-sampled L² projection was used to construct level-set data from the Lagrangian interface, and a narrow-band approach was used to identify and construct appropriate ghost data and boundary conditions at the fluid-solid interface. A series of benchmark problems were used to verify the treatment of the fluid-solid interface conditions with a static interface position. In this paper, we consider the treatment of dynamic interfaces and the associated large bulk Lagrangian displacements of the solid.We present the coupled dynamic fluid-solid system, and develop an explicit, monolithic treatment of the fully-coupled system. The conditions associated with moving interfaces and their implementation are discussed. A comparison of moving vs. fixed reference frames is used to verify the dynamic interface treatment. Lastly, a series of two and and three-dimensional projectile and shock-body interaction calculations are presented. Ultimately, the use of the Lagrangian interface position and a super-sampled projection for fast level-set construction, the narrow-band extraction of ghost data, and monolithic explicit solution algorithm has proved to be a computationally efficient means for treating shock induced fluid-solid interaction problems.

Advances in the development of a cognitive user interface

Directory of Open Access Journals (Sweden)

Jokisch Oliver

2018-01-01

Full Text Available In this contribution, we want to summarize recent development steps of the embedded cognitive user interface UCUI, which enables a user-adaptive scenario in human-machine or even human-robot interactions by considering sophisticated cognitive and semantic modelling. The interface prototype is developed by different German institutes and companies with their steering teams at Fraunhofer IKTS and Brandenburg University of Technology. The interface prototype is able to communicate with users via speech and gesture recognition, speech synthesis and a touch display. The device includes an autarkic semantic processing and beyond a cognitive behavior control, which supports an intuitive interaction to control different kinds of electronic devices, e. g. in a smart home environment or in interactive respectively collaborative robotics. Contrary to available speech assistance systems such as Amazon Echo or Google Home, the introduced cognitive user interface UCUI ensures the user privacy by processing all necessary information without any network access of the interface device.

The ultimate disposition of depleted uranium

Energy Technology Data Exchange (ETDEWEB)

Lemons, T.R. [Uranium Enrichment Organization, Oak Ridge, TN (United States)

1991-12-31

Depleted uranium (DU) is produced as a by-product of the uranium enrichment process. Over 340,000 MTU of DU in the form of UF{sub 6} have been accumulated at the US government gaseous diffusion plants and the stockpile continues to grow. An overview of issues and objectives associated with the inventory management and the ultimate disposition of this material is presented.

Human-machine interfaces based on EMG and EEG applied to robotic systems

Directory of Open Access Journals (Sweden)

Sarcinelli-Filho Mario

2008-03-01

Full Text Available Abstract Background Two different Human-Machine Interfaces (HMIs were developed, both based on electro-biological signals. One is based on the EMG signal and the other is based on the EEG signal. Two major features of such interfaces are their relatively simple data acquisition and processing systems, which need just a few hardware and software resources, so that they are, computationally and financially speaking, low cost solutions. Both interfaces were applied to robotic systems, and their performances are analyzed here. The EMG-based HMI was tested in a mobile robot, while the EEG-based HMI was tested in a mobile robot and a robotic manipulator as well. Results Experiments using the EMG-based HMI were carried out by eight individuals, who were asked to accomplish ten eye blinks with each eye, in order to test the eye blink detection algorithm. An average rightness rate of about 95% reached by individuals with the ability to blink both eyes allowed to conclude that the system could be used to command devices. Experiments with EEG consisted of inviting 25 people (some of them had suffered cases of meningitis and epilepsy to test the system. All of them managed to deal with the HMI in only one training session. Most of them learnt how to use such HMI in less than 15 minutes. The minimum and maximum training times observed were 3 and 50 minutes, respectively. Conclusion Such works are the initial parts of a system to help people with neuromotor diseases, including those with severe dysfunctions. The next steps are to convert a commercial wheelchair in an autonomous mobile vehicle; to implement the HMI onboard the autonomous wheelchair thus obtained to assist people with motor diseases, and to explore the potentiality of EEG signals, making the EEG-based HMI more robust and faster, aiming at using it to help individuals with severe motor dysfunctions.

Evaluation of operators' mental workload of human-system interface automation in the advanced nuclear power plants

International Nuclear Information System (INIS)

Jou, Y.-T.; Yenn, T.-C.; Lin, Chiuhsiang Joe; Yang, C.-W.; Chiang, C.-C.

2009-01-01

It has been expected that the automation of certain tasks in a control room would help decrease operators' mental workload, enhance situation awareness, and improve the whole system performance. However, there have been too many automation-induced system failures that would warrant a fresh look on the influences of automation. Automation problems include the reduction in the operator's system awareness, an increase in monitoring workload, and the degradation in manual skills. This study evaluates operators' mental workload and system performance during a human-system interface (HSI) automation in an advanced nuclear power plant (NPP). The reactor shutdown task and alarm reset task simulations were conducted in this study to evaluate operators' mental workload and performance. The results of this study indicated that for ensuring safe operating in NPPs, the design of automation needs to be carefully implemented. Task characteristics and degrees of automation should be carefully evaluated while designing HSIs. The reactor shutdown tasks studied in this paper suggest that a high level of automation design for the long period and low workload would be sufficient. On the other hand, the degree of automation of alarm reset task does not show a significant difference to the operator's mental workload. In conclusion, the human-system interface automation in advanced NPPs is suggested to be more flexible and needs to be continually improved.

Fun and Efficiency of the Wii Balance Interface

NARCIS (Netherlands)

Fikkert, F.W.; Nijholt, Antinus; Nijholt, A.; Reidsma, D.; Hoeijmakers, Niek; Reidsma, Dennis; van der Vet, P.E.

2010-01-01

Balance input in human-computer interfaces can be beneficial, enjoyable and entertaining. Users can navigate a virtual (game) world or an (empirical) dataset while having their hands free to issue other commands. A new low-cost balance interface, the Nintendo balance board, offers more widespread

Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

International Nuclear Information System (INIS)

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant's or licensee's HSI design

The interface theory of perception leaves me hungry for more: Commentary on Hoffman, Singh, and Prakash, "The interface theory of perception".

Science.gov (United States)

Schlesinger, Matthew

2015-12-01

The interface theory offers a rich blend of logic and mathematical modeling with a dash of evolutionary story-telling, leading to the conclusion that perceptual experience and physical reality are only loosely related. Is the theory convincing? I would have to say "almost"; although it certainly has many elements working in its favor, ultimately, I also found that some important questions were ignored or left unanswered (e.g., a more fully articulated account of how evolutionary mechanisms operate on perception). I am quite optimistic that the next iteration of the theory will be able to address these issues.

Functional Mobility Testing: A Novel Method to Establish Human System Interface Design Requirements

Science.gov (United States)

England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar

2008-01-01

Across all fields of human-system interface design it is vital to posses a sound methodology dictating the constraints on the system based on the capabilities of the human user. These limitations may be based on strength, mobility, dexterity, cognitive ability, etc. and combinations thereof. Data collected in an isolated environment to determine, for example, maximal strength or maximal range of motion would indeed be adequate for establishing not-to-exceed type design limitations, however these restraints on the system may be excessive over what is basally needed. Resources may potentially be saved by having a technique to determine the minimum measurements a system must accommodate. This paper specifically deals with the creation of a novel methodology for establishing mobility requirements for a new generation of space suit design concepts. Historically, the Space Shuttle and the International Space Station vehicle and space hardware design requirements documents such as the Man-Systems Integration Standards and International Space Station Flight Crew Integration Standard explicitly stated that the designers should strive to provide the maximum joint range of motion capabilities exhibited by a minimally clothed human subject. In the course of developing the Human-Systems Integration Requirements (HSIR) for the new space exploration initiative (Constellation), an effort was made to redefine the mobility requirements in the interest of safety and cost. Systems designed for manned space exploration can receive compounded gains from simplified designs that are both initially less expensive to produce and lighter, thereby, cheaper to launch.

A metaproteomic approach to study human-microbial ecosystems at the mucosal luminal interface.

Directory of Open Access Journals (Sweden)

Xiaoxiao Li

Full Text Available Aberrant interactions between the host and the intestinal bacteria are thought to contribute to the pathogenesis of many digestive diseases. However, studying the complex ecosystem at the human mucosal-luminal interface (MLI is challenging and requires an integrative systems biology approach. Therefore, we developed a novel method integrating lavage sampling of the human mucosal surface, high-throughput proteomics, and a unique suite of bioinformatic and statistical analyses. Shotgun proteomic analysis of secreted proteins recovered from the MLI confirmed the presence of both human and bacterial components. To profile the MLI metaproteome, we collected 205 mucosal lavage samples from 38 healthy subjects, and subjected them to high-throughput proteomics. The spectral data were subjected to a rigorous data processing pipeline to optimize suitability for quantitation and analysis, and then were evaluated using a set of biostatistical tools. Compared to the mucosal transcriptome, the MLI metaproteome was enriched for extracellular proteins involved in response to stimulus and immune system processes. Analysis of the metaproteome revealed significant individual-related as well as anatomic region-related (biogeographic features. Quantitative shotgun proteomics established the identity and confirmed the biogeographic association of 49 proteins (including 3 functional protein networks demarcating the proximal and distal colon. This robust and integrated proteomic approach is thus effective for identifying functional features of the human mucosal ecosystem, and a fresh understanding of the basic biology and disease processes at the MLI.

Management of Hypothyroid Cases in Nuclear Medicine Centre, Dhaka-An Initial Experience

International Nuclear Information System (INIS)

Afroz, S; Nasreen, F; Hossain, S; Begum, R; Taslima, BDA

2001-01-01

Hypothyroidism is a common and well treatable disease. Regular follow up and good compliance of the patients are the main key features for a successful outcome. In our country, most of the patients come from a poor socio-economic background and are referred to the Nuclear Medicine Centre for thyroid function tests. As the referral is from either Surgeons, ENT specialists or general physicians and the cost for repeated investigations are quite expensive, the patients gradually lose interest in regular follow-ups. In addition, they do not take thyroxine regularly and the ultimate fate is disappointing. Realizing these problems we decided to threat those patients in our centre and offer them a nominal charge for the hormonal estimations and follow up managements. A total number of 174 patients were studied in 5 years (1997-2001). Out of 174 patients 48 patients were toxic patients receiving radioiodine and the rest 126 were hypothyroid due to other causes. 72.41% patients had regular follow up and amongst them, 57.14% became euthyroid. The test were improving. (author) 11 refs., 2 tabs

Multi-technology control centre to integrate 460 MW renewables; Centro de control multitecnología para la integración de 460 MW renovables

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-07-01

The new RWE Innogy Aersa Control Centre that has been certified to act as an interface with CECRE (the Renewable Energy Control Centre) since February 2015, connects RWE’s 20 renewable energy facilities with REE, the Spanish Electricity Grid. As a result, it ensures that wind farms, in addition to hydropower and solar plants, can inject the energy generated by its 460 MW installed safely and with no penalties. Green Eagle Solutions, a provider of software solutions for renewable energy companies, has collaborated with RWE in the development of this Control Centre, meeting the high standards of quality and safety required by RWE. This centre uses CompactSCADA® technology to integrate power generation facilities that need to be integrated in a Control Centre to communicate with REE’s CECRE. (Author)

Medical data transmission system for remote healthcare centres

International Nuclear Information System (INIS)

Gonzalez, E A; Cagnolo, F J; Olmos, C E; Centeno, C A; Riva, G G; Zerbini, C A

2007-01-01

The main motivation of this project is to improve the healthcare centres equipment and human resources efficiency, enabling those centres for transmission of parameters of medical interest. This system facilitates remote consultation, in particular between specialists and remote healthcare centres. Likewise it contributes to the qualification of professionals. The electrocardiographic (ECG) and electroencephalographic (EEG) signals are acquired, processed and then sent, fulfilling the effective norms, for application in the hospital network of Cordoba Province, which has nodes interconnected by phone line. As innovative aspects we emphasized the low cost of development and maintenance, great versatility and handling simplicity with a modular design for interconnection with diverse data transmission media (Wi-Fi, GPRS, etc.). Successfully experiences were obtained during the acquisition of the signals and transmissions on wired LAN networks. As improvements, we can mention: energy consumption optimization and mobile communication systems usage, in order to offer more autonomy

An online brain-machine interface using decoding of movement direction from the human electrocorticogram

Science.gov (United States)

Milekovic, Tomislav; Fischer, Jörg; Pistohl, Tobias; Ruescher, Johanna; Schulze-Bonhage, Andreas; Aertsen, Ad; Rickert, Jörn; Ball, Tonio; Mehring, Carsten

2012-08-01

A brain-machine interface (BMI) can be used to control movements of an artificial effector, e.g. movements of an arm prosthesis, by motor cortical signals that control the equivalent movements of the corresponding body part, e.g. arm movements. This approach has been successfully applied in monkeys and humans by accurately extracting parameters of movements from the spiking activity of multiple single neurons. We show that the same approach can be realized using brain activity measured directly from the surface of the human cortex using electrocorticography (ECoG). Five subjects, implanted with ECoG implants for the purpose of epilepsy assessment, took part in our study. Subjects used directionally dependent ECoG signals, recorded during active movements of a single arm, to control a computer cursor in one out of two directions. Significant BMI control was achieved in four out of five subjects with correct directional decoding in 69%-86% of the trials (75% on average). Our results demonstrate the feasibility of an online BMI using decoding of movement direction from human ECoG signals. Thus, to achieve such BMIs, ECoG signals might be used in conjunction with or as an alternative to intracortical neural signals.

New generation of human machine interfaces for controlling UAV through depth-based gesture recognition

Science.gov (United States)

Mantecón, Tomás.; del Blanco, Carlos Roberto; Jaureguizar, Fernando; García, Narciso

2014-06-01

New forms of natural interactions between human operators and UAVs (Unmanned Aerial Vehicle) are demanded by the military industry to achieve a better balance of the UAV control and the burden of the human operator. In this work, a human machine interface (HMI) based on a novel gesture recognition system using depth imagery is proposed for the control of UAVs. Hand gesture recognition based on depth imagery is a promising approach for HMIs because it is more intuitive, natural, and non-intrusive than other alternatives using complex controllers. The proposed system is based on a Support Vector Machine (SVM) classifier that uses spatio-temporal depth descriptors as input features. The designed descriptor is based on a variation of the Local Binary Pattern (LBP) technique to efficiently work with depth video sequences. Other major consideration is the especial hand sign language used for the UAV control. A tradeoff between the use of natural hand signs and the minimization of the inter-sign interference has been established. Promising results have been achieved in a depth based database of hand gestures especially developed for the validation of the proposed system.

Hands in space: gesture interaction with augmented-reality interfaces.

Science.gov (United States)

Billinghurst, Mark; Piumsomboon, Tham; Huidong Bai

2014-01-01

Researchers at the Human Interface Technology Laboratory New Zealand (HIT Lab NZ) are investigating free-hand gestures for natural interaction with augmented-reality interfaces. They've applied the results to systems for desktop computers and mobile devices.

The challenges facing the European Union Centres of Excellence

International Nuclear Information System (INIS)

Dupre, Bruno; )

2012-10-01

On 19 April 2012, the United Nation Security Council congratulated the European Union for its initiative on centres of excellence in the nuclear, radiological, biological, and chemical fields. The time for glowing reports is over. Three years after its creation, the support of EU Member Sates, the Security Council, the G8, the IEAE, the WHO, the USA, Interpol, the ICRC, has been obtained. Other diplomatic, organisational, and communicative challenges have now arisen regarding implementation. The manifest challenges include: 1/Political exploitation of the centres. Following a recent round table in Algiers, the Algerian press ran headlines such as 'terrorism, the Malian crisis arrives in Algiers' CBRN centres of excellence' and 'Bouteflika, the centres of excellence slight'. 2/Communication errors. A unanimously approved expert in South East Asia became a persona non grata over the last six months despite not making any fundamental mistake, aside from his inability to evaluate the degree of a country's sensitivity and pride. The countries in the region went so far as to threaten to pull out of the Manila centre as a result of this ultimately minor error in communication. 3/The scope of the centres' role complicates the grasp of its objectives. To date, the focus has essentially been on non-proliferation and the fight against CBRN terrorism, under the well-established theme of Resolution 1540. The shift of CBRN focus, at the behest of certain regions, on to real natural risks (pandemics) or industrial risks (protection of crucial infrastructure following an earthquake, flooding, or a tsunami) fundamentally changes the teams' make-up and the mobilization of resources. The emergency services culture is different to that of nonproliferation. However, they both very much address CBRN risks and threats. 4/The limits of the 'bottom-up' approach. To date, the centres' success has been due to the lack of restrictive rules. The policy is to enlist willing third-party States

Ultimate load model test for Sizewell 'B' primary containment

International Nuclear Information System (INIS)

Crowder, R.

1988-01-01

This paper considers the factors influencing the adoption of an ultimate load factor for the Sizewell 'B' PWR primary containment structure. As part of the validation process for the ultimate load analysis method, a proposal has been made by Nuclear Design Associates to build and test a 1/10th scale model of the containment structure, which would proceed following the granting of section 2 consent for Sizewell 'B'. The modelling principles, construction method and test proposals are examined in some detail. The proposal is currently being considered by the CEGB's Project Management Team. (author)

A collaborative brain-computer interface for improving human performance.

Directory of Open Access Journals (Sweden)

Yijun Wang

Full Text Available Electroencephalogram (EEG based brain-computer interfaces (BCI have been studied since the 1970s. Currently, the main focus of BCI research lies on the clinical use, which aims to provide a new communication channel to patients with motor disabilities to improve their quality of life. However, the BCI technology can also be used to improve human performance for normal healthy users. Although this application has been proposed for a long time, little progress has been made in real-world practices due to technical limits of EEG. To overcome the bottleneck of low single-user BCI performance, this study proposes a collaborative paradigm to improve overall BCI performance by integrating information from multiple users. To test the feasibility of a collaborative BCI, this study quantitatively compares the classification accuracies of collaborative and single-user BCI applied to the EEG data collected from 20 subjects in a movement-planning experiment. This study also explores three different methods for fusing and analyzing EEG data from multiple subjects: (1 Event-related potentials (ERP averaging, (2 Feature concatenating, and (3 Voting. In a demonstration system using the Voting method, the classification accuracy of predicting movement directions (reaching left vs. reaching right was enhanced substantially from 66% to 80%, 88%, 93%, and 95% as the numbers of subjects increased from 1 to 5, 10, 15, and 20, respectively. Furthermore, the decision of reaching direction could be made around 100-250 ms earlier than the subject's actual motor response by decoding the ERP activities arising mainly from the posterior parietal cortex (PPC, which are related to the processing of visuomotor transmission. Taken together, these results suggest that a collaborative BCI can effectively fuse brain activities of a group of people to improve the overall performance of natural human behavior.

AltaLink uses interactive voice response to improve call centre efficiency

Energy Technology Data Exchange (ETDEWEB)

Tellerman, N.; Sutherland, T.

2010-11-15

This article discussed an automated check-in/check-out system implemented by a transmission provider to improve efficiency and worker safety. The system, known as SEEN (Substation Entry/Exit Notification), replaced an inefficient process in which individuals entering or leaving a substation checked in or out by telephoning a control centre. With the increase in maintenance work resulting from aging infrastructure and increased power consumption, the call centre became overburdened with entry/exit calls, which created inefficient wait times for workers. The SEEN system allows crews to check in and out of substations through an Interactive Voice Response (IVR) server that communicates to the Staff-on-Site system through a web service interface. Employees or contractors follow automated voice instructions to check in and out of stations. Dedicated 10-digit phone numbers allow for automatic employee recognition. Each caller is prompted to enter a site number, the reason the site is being accessed, and, for solitary workers, a contact number. The system verifies the worker is qualified to enter the site and allows the control centre to identify hazardous sites. The new system resulted in improved efficiency for both crews and control centre operators. In the first operating year, the system reduced the number of entrance/exit calls by 70 percent. The next phase of the project will link the system into the energy management system and will display icons on pertinent System Operator displays when workers are checked into a site. 3 figs.

Electrochemical ion transfer across liquid/liquid interfaces confined within solid-state micropore arrays--simulations and experiments.

Science.gov (United States)

Strutwolf, Jörg; Scanlon, Micheál D; Arrigan, Damien W M

2009-01-01

Miniaturised liquid/liquid interfaces provide benefits for bioanalytical detection with electrochemical methods. In this work, microporous silicon membranes which can be used for interface miniaturisation were characterized by simulations and experiments. The microporous membranes possessed hexagonal arrays of pores with radii between 10 and 25 microm, a pore depth of 100 microm and pore centre-to-centre separations between 99 and 986 microm. Cyclic voltammetry was used to monitor ion transfer across arrays of micro-interfaces between two immiscible electrolyte solutions (microITIES) formed at these membranes, with the organic phase present as an organogel. The results were compared to computational simulations taking into account mass transport by diffusion and encompassing diffusion to recessed interfaces and overlapped diffusion zones. The simulation and experimental data were both consistent with the situation where the location of the liquid/liquid (l/l) interface was on the aqueous side of the silicon membrane and the pores were filled with the organic phase. While the current for the forward potential scan (transfer of the ion from the aqueous phase to the organic phase) was strongly dependent on the location of the l/l interface, the current peak during the reverse scan (transfer of the ion from the organic phase to the aqueous phase) was influenced by the ratio of the transferring ion's diffusion coefficients in both phases. The diffusion coefficient of the transferring ion in the gelified organic phase was ca. nine times smaller than in the aqueous phase. Asymmetric cyclic voltammogram shapes were caused by the combined effect of non-symmetrical diffusion (spherical and linear) and by the inequality of the diffusion coefficient in both phases. Overlapping diffusion zones were responsible for the observation of current peaks instead of steady-state currents during the forward scan. The characterisation of the diffusion behaviour is an important requirement

Interfaces between particle physics and cosmology

International Nuclear Information System (INIS)

Riazuddin

1984-01-01

Among the physicists' attempts to understand the fundamental structure of matter have been the attempts to: (i) find the ultimate constituents of matter; and (ii) to attain a unification of the forces responsible for the interactions among them. Recent progress in these attempts has led to energy scales which can not conceivably be attained in laboratory experiments, but which would not only be present, but would play an important role in the earliest stages of the big bang model of the Universe. We are talking here of an energy scale E about 10 15 GeV, the corresponding temperature, T, being about 10 28 K relevant to times t about 10 -35 sec. after the big bang. Also, many of the ideas of contemporary particle physics lead to dramatic consequences when applied to the very early universe. It is such interfaces between particle physics and cosmology which are reviewed in this lecture. I shall discuss three such interfaces: (i) the generation of the baryon number of the Universe; (ii) a limit on the number of kinds of neutrinos and therefore on the number of quarklepton generations (if we believe in quark-lepton symmetry); and (iii) the neutrino mass

Towards passive brain-computer interfaces: applying brain-computer interface technology to human-machine systems in general.

Science.gov (United States)

Zander, Thorsten O; Kothe, Christian

2011-04-01

Cognitive monitoring is an approach utilizing realtime brain signal decoding (RBSD) for gaining information on the ongoing cognitive user state. In recent decades this approach has brought valuable insight into the cognition of an interacting human. Automated RBSD can be used to set up a brain-computer interface (BCI) providing a novel input modality for technical systems solely based on brain activity. In BCIs the user usually sends voluntary and directed commands to control the connected computer system or to communicate through it. In this paper we propose an extension of this approach by fusing BCI technology with cognitive monitoring, providing valuable information about the users' intentions, situational interpretations and emotional states to the technical system. We call this approach passive BCI. In the following we give an overview of studies which utilize passive BCI, as well as other novel types of applications resulting from BCI technology. We especially focus on applications for healthy users, and the specific requirements and demands of this user group. Since the presented approach of combining cognitive monitoring with BCI technology is very similar to the concept of BCIs itself we propose a unifying categorization of BCI-based applications, including the novel approach of passive BCI.

Computer-based diagnostic monitoring to enhance the human-machine interface of complex processes

International Nuclear Information System (INIS)

Kim, I.S.

1992-02-01

There is a growing interest in introducing an automated, on-line, diagnostic monitoring function into the human-machine interfaces (HMIs) or control rooms of complex process plants. The design of such a system should be properly integrated with other HMI systems in the control room, such as the alarms system or the Safety Parameter Display System (SPDS). This paper provides a conceptual foundation for the development of a Plant-wide Diagnostic Monitoring System (PDMS), along with functional requirements for the system and other advanced HMI systems. Insights are presented into the design of an efficient and robust PDMS, which were gained from a critical review of various methodologies developed in the nuclear power industry, the chemical process industry, and the space technological community

On the decrease of ultimate elongation of gum elastomer by irradiation

International Nuclear Information System (INIS)

Ito, Masayuki

1986-01-01

The reason why the ultimate elongation of gum elastomer decreases by irradiation was studied. The sample used is tetrafluoroethylenepropylene copolymer vulcanized which is a heat resistant elastomer. The sample was irradiated by a electron beam at room temperature. Cross-linking predominate in the operation. (Case 1) Scission predominant condition (Case 2) was given by irradiation of Co-60 γ ray at 100 deg C. Alternative irradiation of γ ray and electron beam under above condition can keep the original cross-linking density by the appropriate choice of each of the doses. (Case 3) The three cases mentioned above involve all of the cases of radiation induced aging of elastomers. Therefor, the following explanation for three cases shows the reason why the ultimate elongation of gum elastomer decreases by irradiation. Case 1. Cross-linking predominant condition. Ultimate elongation is proportional to -0.5 power of the dose. This fact can be explicable by the model of Buche, i.e. the breaking of a short chain causes another to break and that so on throughout the whole sample. Case 2. Chain scission predominant condition. Ultimate elongation increases by irradiation for a certain dose. This fact can understand by the model of Buche. But from a certain dose ultimate elongation does not increase. In the period the structure of the sample turned to be the same structure as the low molecular weight amorphose polymer vulcanized. Case 3. Rate of cross-linking and scission is the same. The average chain length does not chainge in the condition. But the distribution of chain length became wider and wider by irradiation. The increase of short chain result the decrease in ultimate elongation. (author)

On the applicability of brain reading for predictive human-machine interfaces in robotics.

Science.gov (United States)

Kirchner, Elsa Andrea; Kim, Su Kyoung; Straube, Sirko; Seeland, Anett; Wöhrle, Hendrik; Krell, Mario Michael; Tabie, Marc; Fahle, Manfred

2013-01-01

The ability of today's robots to autonomously support humans in their daily activities is still limited. To improve this, predictive human-machine interfaces (HMIs) can be applied to better support future interaction between human and machine. To infer upcoming context-based behavior relevant brain states of the human have to be detected. This is achieved by brain reading (BR), a passive approach for single trial EEG analysis that makes use of supervised machine learning (ML) methods. In this work we propose that BR is able to detect concrete states of the interacting human. To support this, we show that BR detects patterns in the electroencephalogram (EEG) that can be related to event-related activity in the EEG like the P300, which are indicators of concrete states or brain processes like target recognition processes. Further, we improve the robustness and applicability of BR in application-oriented scenarios by identifying and combining most relevant training data for single trial classification and by applying classifier transfer. We show that training and testing, i.e., application of the classifier, can be carried out on different classes, if the samples of both classes miss a relevant pattern. Classifier transfer is important for the usage of BR in application scenarios, where only small amounts of training examples are available. Finally, we demonstrate a dual BR application in an experimental setup that requires similar behavior as performed during the teleoperation of a robotic arm. Here, target recognition processes and movement preparation processes are detected simultaneously. In summary, our findings contribute to the development of robust and stable predictive HMIs that enable the simultaneous support of different interaction behaviors.

On the applicability of brain reading for predictive human-machine interfaces in robotics.

Directory of Open Access Journals (Sweden)

Elsa Andrea Kirchner

Full Text Available The ability of today's robots to autonomously support humans in their daily activities is still limited. To improve this, predictive human-machine interfaces (HMIs can be applied to better support future interaction between human and machine. To infer upcoming context-based behavior relevant brain states of the human have to be detected. This is achieved by brain reading (BR, a passive approach for single trial EEG analysis that makes use of supervised machine learning (ML methods. In this work we propose that BR is able to detect concrete states of the interacting human. To support this, we show that BR detects patterns in the electroencephalogram (EEG that can be related to event-related activity in the EEG like the P300, which are indicators of concrete states or brain processes like target recognition processes. Further, we improve the robustness and applicability of BR in application-oriented scenarios by identifying and combining most relevant training data for single trial classification and by applying classifier transfer. We show that training and testing, i.e., application of the classifier, can be carried out on different classes, if the samples of both classes miss a relevant pattern. Classifier transfer is important for the usage of BR in application scenarios, where only small amounts of training examples are available. Finally, we demonstrate a dual BR application in an experimental setup that requires similar behavior as performed during the teleoperation of a robotic arm. Here, target recognition processes and movement preparation processes are detected simultaneously. In summary, our findings contribute to the development of robust and stable predictive HMIs that enable the simultaneous support of different interaction behaviors.

Manche centre

International Nuclear Information System (INIS)

1997-05-01

After a general presentation of radioactivity and radioactive wastes and of the French national agency for the management of radioactive wastes (ANDRA), this brochure gives a general overview of the Manche low- and medium-level radioactive waste disposal centre: principles of storage safety, waste containers (first confinement barrier), storage facility and cover (second confinement barrier), the underground (third confinement barrier), the impact of the centre on its environment, and the control of radioactivity in the vicinity of the centre. (J.S.)

A human-machine interface evaluation method: A difficulty evaluation method in information searching (DEMIS)

International Nuclear Information System (INIS)

Ha, Jun Su; Seong, Poong Hyun

2009-01-01

A human-machine interface (HMI) evaluation method, which is named 'difficulty evaluation method in information searching (DEMIS)', is proposed and demonstrated with an experimental study. The DEMIS is based on a human performance model and two measures of attentional-resource effectiveness in monitoring and detection tasks in nuclear power plants (NPPs). Operator competence and HMI design are modeled to be most significant factors to human performance. One of the two effectiveness measures is fixation-to-importance ratio (FIR) which represents attentional resource (eye fixations) spent on an information source compared to importance of the information source. The other measure is selective attention effectiveness (SAE) which incorporates FIRs for all information sources. The underlying principle of the measures is that the information source should be selectively attended to according to its informational importance. In this study, poor performance in information searching tasks is modeled to be coupled with difficulties caused by poor mental models of operators or/and poor HMI design. Human performance in information searching tasks is evaluated by analyzing the FIR and the SAE. Operator mental models are evaluated by a questionnaire-based method. Then difficulties caused by a poor HMI design are evaluated by a focused interview based on the FIR evaluation and then root causes leading to poor performance are identified in a systematic way.

Development of Simulation-Based Evaluation System for Iterative Design of Human-Machine Interface in a Nuclear Power Plant - Application for Reducing Workload

International Nuclear Information System (INIS)

Fumizawa, Motoo; Kameda, Akiyuki; Nakagawa, Takashi; Wu Wei; Yoshikawa, Hidekazu

2003-01-01

Development of simulation-based evaluation and analysis support system for man-machine interface design (SEAMAID) has been conducted in the Nuclear Power Engineering Corporation to simulate the behavior of a few operators and the human-machine interface (HMI) in a commercialized pressurized water reactor plant. The workload is one of the key factors with respect to reducing the human error in the operation of nuclear power plants. In order to produce a high-quality design of HMI, the evaluation method was developed to simulate and analyze the operator's workload. Our method was adopted from the cognition model proposed by Reason. The workload such as the length of the visual point movement and the moving length of the operators was visualized in a monitor image during the simulation, and then recorded as a movie-file. As a consequence, the validation of SEAMAID was clarified

The proposed human factors engineering program plan for man-machine interface system design of the next generation NPP in Korea

International Nuclear Information System (INIS)

Oh, I.S.; Lee, H.C.; Seo, S.M.; Cheon, S.W.; Park, K.O.; Lee, J.W.; Sim, B.S.

1994-01-01

Human factors application to nuclear power plant (NPP) design, especially, to man-machine interface system (MMIS) design becomes an important issue among the licensing requirements. Recently, the nuclear regulatory bodies require the evidence of systematic human factors application to the MMIS design. Human Factors Engineering Program Plan (HFEPP), as a basis and central one among the human factors application by the MMIS designers. This paper describes the framework of HFEPP for the MMIS design of next generation NPP (NG-NPP) in Korea. This framework provides an integral plan and some bases of the systematic application of human factors to the MMIS design, and consists of purpose and scope, codes and standards, human factors organization, human factors tasks, engineering control methodology, human factors documentations, and milestones. The proposed HFEPP is a top level document to define and describe human factors tasks, based on each step of MMIS design process, in view point of how, what, when and by whom to be performed. (author). 11 refs, 1 fig

Assessment on Ultimate Load of Cold-formed Steel Channel (CFSC Stub Column

Directory of Open Access Journals (Sweden)

Mohd Sani Mohd Syahrul Hisyam

2015-01-01

Full Text Available Cold-formed steel is used as the non-structural and structural material in civil engineering work and building. Cold-formed steel channel is selected and cut into 100 mm, 200 mm, 300 mm, 400 mm and 500 mm. The slenderness ratio is calculated and noted as a stub or short column because below 40. The column is tested by using Universal Testing Machine to determine the ultimate load of the stub column. Besides, the CFSC is determined the material properties of CFSC for checking it’s the originality of steel based material. The experimental data are tested and compared with the Direct Strength Method (DSM. It showed that the CFSC1 with a height of 100 mm is reported to have a higher value of ultimate load when compared with other samples. When the height of the stub column increased, the ultimate load of the sample is decreased. Then, the CFSC1 also showed a higher in initial stiffness when compared with other samples. All samples are shown having a higher data in ultimate load when compared with the Direct Strength Method prediction. The ultimate load of experimental and DSM all gave a ratio below 1.03. Finally, all samples can further recommend determining the relation between the ultimate loads with variations of height of the column.

Excess glycogen does not resolve high ultimate pH of oxidative muscle.

Science.gov (United States)

England, Eric M; Matarneh, Sulaiman K; Oliver, Emily M; Apaoblaza, Ariel; Scheffler, Tracy L; Shi, Hao; Gerrard, David E

2016-04-01

Skeletal muscle glycogen content can impact the extent of postmortem pH decline. Compared to glycolytic muscles, oxidative muscles contain lower glycogen levels antemortem which may contribute to the higher ultimate pH. In an effort to explore further the participation of glycogen in postmortem metabolism, we postulated that increasing the availability of glycogen would drive additional pH decline in oxidative muscles to equivalent pH values similar to the ultimate pH of glycolytic muscles. Glycolysis and pH declines were compared in porcine longissimus lumborum (glycolytic) and masseter (oxidative) muscles using an in vitro system in the presence of excess glycogen. The ultimate pH of the system containing longissimus lumborum reached a value similar to that observed in intact muscle. The pH decline of the system containing masseter samples stopped prematurely resulting in a higher ultimate pH which was similar to that of intact masseter muscle. To investigate further, we titrated powdered longissimus lumborum and masseter samples in the reaction buffer. As the percentage of glycolytic sample increased, the ultimate pH decreased. These data show that oxidative muscle produces meat with a high ultimate pH regardless of glycogen content and suggest that inherent muscle factors associated with glycolytic muscle control the extent of pH decline in pig muscles. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ultimate capabilities of soft x-ray optics

International Nuclear Information System (INIS)

Vinogradov, A.V.; Zorev, N.N.; Kozhevnikov, I.V.

1988-01-01

Nonimaging soft X-ray optics is examined. The ultimate capabilities of a number of X-ray optical components designed for concentration and collimation of radiation from point sources are determined. The applications of X-ray optics are discussed together with the properties of materials in the X-ray range

Molecular characterization of canine distemper vi- rus circulating in ...

African Journals Online (AJOL)

2OIE Collaborating Centre for Diseases at Animal and Human Interface, FAO Reference Centre for Rabies, Viale ... Asia-1 lineage canine distemper virus is circulating in outbreak. .... jected to cell culture on Vero cell lines for virus isolation.

Ultimate Opening Combined with Area Stability Applied to Urban Scenes

OpenAIRE

Marcotegui , Beatriz; Serna , Andrés; Hernández , Jorge

2017-01-01

International audience; This paper explores the use of ultimate opening in urban analysis context. It demonstrates the efficiency of this approach for street level elevation images, derived from 3D point clouds acquired by terrestrial mobile mapping systems. An area-stability term is introduced in the residual definition, reducing the over-segmentation of the vegetation while preserving small significant regions. We compare two possible combinations of the Ultimate Opening and the Area Stabil...

FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human-Animal Interface.

Science.gov (United States)

Anderson, Tara; Capua, Ilaria; Dauphin, Gwenaëlle; Donis, Ruben; Fouchier, Ron; Mumford, Elizabeth; Peiris, Malik; Swayne, David; Thiermann, Alex

2010-05-01

For the past 10 years, animal health experts and human health experts have been gaining experience in the technical aspects of avian influenza in mostly separate fora. More recently, in 2006, in a meeting of the small WHO Working Group on Influenza Research at the Human Animal Interface (Meeting report available from: http://www.who.int/csr/resources/publications/influenza/WHO_CDS_EPR_GIP_2006_3/en/index.html) in Geneva allowed influenza experts from the animal and public health sectors to discuss together the most recent avian influenza research. Ad hoc bilateral discussions on specific technical issues as well as formal meetings such as the Technical Meeting on HPAI and Human H5N1 Infection (Rome, June, 2007; information available from: http://www.fao.org/avianflu/en/conferences/june2007/index.html) have increasingly brought the sectors together and broadened the understanding of the topics of concern to each sector. The sectors have also recently come together at the broad global level, and have developed a joint strategy document for working together on zoonotic diseases (Joint strategy available from: ftp://ftp.fao.org/docrep/fao/011/ajl37e/ajl37e00.pdf). The 2008 FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human Animal Interface described here was the first opportunity for a large group of influenza experts from the animal and public health sectors to gather and discuss purely technical topics of joint interest that exist at the human-animal interface. During the consultation, three influenza-specific sessions aimed to (1) identify virological characteristics of avian influenza viruses (AIVs) important for zoonotic and pandemic disease, (2) evaluate the factors affecting evolution and emergence of a pandemic influenza strain and identify existing monitoring systems, and (3) identify modes of transmission and exposure sources for human zoonotic influenza infection (including discussion of specific exposure risks by affected countries). A

The Ultimate Technology

DEFF Research Database (Denmark)

Riis, Søren

2013-01-01

One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However......, by reinterpreting his notion of "modern technology," this article shows how it is possible to philosophically assess living technologies and to recognize ways in which Heidegger anticipated this phenomenon with his notion of cybernetics. The interpretation elucidates the fundamental process of technology becoming...... living and simultaneously presents living technology as the ultimate technology. The thesis of this article is that living technology is not just one more technology; rather, it is the perfection of technology as understood by Aristotle. Aristotle's thinking is in this way a key example of a profound...

Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

Energy Technology Data Exchange (ETDEWEB)

None

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant`s or licensee`s HSI design.

A study on nonlinear behavior of reactor containment structures during ultimate accident condition(I)

Energy Technology Data Exchange (ETDEWEB)

Kim, Sun Hoon; Kim, Young Jin; Park, Joo Yeon [Youngdong Univ., Yeongdong (Korea, Republic of)] (and others)

2003-03-15

In this study, the following scope and contents are established for first year's study of determining ultimate pressure capacity of CANDU-type reactor containment. State-of-arts on the prediction of the ultimate pressure capacity of prestressed concrete reactor containment. Comparative study on structural characteristics and analysis model of CANDU-type reactor containment. State-of-arts on evaluation method of the ultimate pressure capacity of prestressed concrete reactor containment. Enhancement of evaluation method of the ultimate pressure capacity for PWR containment structure. In order to determine a realistic lower bound of a typical reactor containment structural capacity for internal pressure, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate capacity are required. Especially, the in-depth evaluation of modeling technique and analysis procedure for determining ultimate pressure capacity of CANDU-type reactor containment is required. Therefore, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate pressure capacity of CANDU-type reactor containment for internal pressure will be suggested in this study.

A study on nonlinear behavior of reactor containment structures during ultimate accident condition(I)

International Nuclear Information System (INIS)

Kim, Sun Hoon; Kim, Young Jin; Park, Joo Yeon

2003-03-01

In this study, the following scope and contents are established for first year's study of determining ultimate pressure capacity of CANDU-type reactor containment. State-of-arts on the prediction of the ultimate pressure capacity of prestressed concrete reactor containment. Comparative study on structural characteristics and analysis model of CANDU-type reactor containment. State-of-arts on evaluation method of the ultimate pressure capacity of prestressed concrete reactor containment. Enhancement of evaluation method of the ultimate pressure capacity for PWR containment structure. In order to determine a realistic lower bound of a typical reactor containment structural capacity for internal pressure, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate capacity are required. Especially, the in-depth evaluation of modeling technique and analysis procedure for determining ultimate pressure capacity of CANDU-type reactor containment is required. Therefore, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate pressure capacity of CANDU-type reactor containment for internal pressure will be suggested in this study

Moving forward responsibly: Oversight for the nanotechnology-biology interface

International Nuclear Information System (INIS)

Kuzma, Jennifer

2007-01-01

Challenges and opportunities for appropriate oversight of nanotechnology applied to or derived from biological systems (nano-bio interface) were discussed in a public workshop and dialog hosted by the Center for Science, Technology, and Public Policy of the University of Minnesota on September 15, 2005. This paper discusses the themes that emerged from the workshop, including the importance of analyzing potential gaps in current regulatory systems; deciding upon the general approach taken toward regulation; employing non-regulatory mechanisms for governance; making risk and other studies transparent and available to the public; bolstering mechanisms for public participation in risk analysis; creating more opportunities for meaningful discussion of the social and ethical dimensions of the nano-bio interface; increasing funds for implications and problem-solving research in this area; and having independent and reliable sources for communication. The workshop was successful in identifying ways of moving forward responsibly so that ultimately nanotechnology and its products can succeed in developers', researchers', regulators', and the public's eyes

Display analysis with the optimal control model of the human operator. [pilot-vehicle display interface and information processing

Science.gov (United States)

Baron, S.; Levison, W. H.

1977-01-01

Application of the optimal control model of the human operator to problems in display analysis is discussed. Those aspects of the model pertaining to the operator-display interface and to operator information processing are reviewed and discussed. The techniques are then applied to the analysis of advanced display/control systems for a Terminal Configured Vehicle. Model results are compared with those obtained in a large, fixed-base simulation.

75 FR 60133 - Agency Information Collection Activities: Declaration of Ultimate Consignee That Articles Were...

Science.gov (United States)

2010-09-29

... Activities: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...: Title: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...

The ideal Atomic Centre; Le Centre Atomique ideal

Energy Technology Data Exchange (ETDEWEB)

Mas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [French] L'auteur propose une base de reflexions a tous ceux qui doivent concevoir, realiser et faire vivre un Centre d'Etudes Nucleaires. Un grand nombre des idees exprimees peut d'ailleurs s'appliquer a un Centre d'Etudes Scientifiques non nucleaires. Dans son ouvrage, l'auteur passe en revue les differents problemes qui se posent au constructeur: plan, masse, infrastructure, batiments et grands appareils du Centre, et ceux qu'a a resoudre le directeur: entretien, fabrication, approvisionnements, securite. L'auteur insiste sur l'aspect des rapports qui doivent exister entre les chercheurs et ceux qui les administrent. Il propose a cette fin la creation d'une Ecole Nationale d'Administration de la Recherche qui formerait des cadres administratifs pour les organismes publics ou prives, specialises dans la Recherche fondamentale ou appliquee. (auteur)

Porphyrins at interfaces

Science.gov (United States)

Auwärter, Willi; Écija, David; Klappenberger, Florian; Barth, Johannes V.

2015-02-01

Porphyrins and other tetrapyrrole macrocycles possess an impressive variety of functional properties that have been exploited in natural and artificial systems. Different metal centres incorporated within the tetradentate ligand are key for achieving and regulating vital processes, including reversible axial ligation of adducts, electron transfer, light-harvesting and catalytic transformations. Tailored substituents optimize their performance, dictating their arrangement in specific environments and mediating the assembly of molecular nanoarchitectures. Here we review the current understanding of these species at well-defined interfaces, disclosing exquisite insights into their structural and chemical properties, and also discussing methods by which to manipulate their intramolecular and organizational features. The distinct characteristics arising from the interfacial confinement offer intriguing prospects for molecular science and advanced materials. We assess the role of surface interactions with respect to electronic and physicochemical characteristics, and describe in situ metallation pathways, molecular magnetism, rotation and switching. The engineering of nanostructures, organized layers, interfacial hybrid and bio-inspired systems is also addressed.

PeDaB - the personal dosimetry database at the research centre Juelich

International Nuclear Information System (INIS)

Geisse, C.; Hill, P.; Paschke, M.; Hille, R.; Schlaeger, M.

1998-01-01

In May, 1997 the mainframe based registration, processing and archiving of personal monitoring data at the research centre Juelich (FZJ) was transferred to a client server system. A complex database application was developed. The client user interface is a Windows based Microsoft ACCESS application which is connected to an ORACLE database via ODBC and TCP/IP. The conversion covered all areas of personal dosimetry including internal and external exposition as well as administrative areas. A higher degree of flexibility, data security and integrity was achieved. (orig.) [de

A study on the application of voice interaction in automotive human machine interface experience design

Science.gov (United States)

Huang, Zhaohui; Huang, Xiemin

2018-04-01

This paper, firstly, introduces the application trend of the integration of multi-channel interactions in automotive HMI ((Human Machine Interface) from complex information models faced by existing automotive HMI and describes various interaction modes. By comparing voice interaction and touch screen, gestures and other interaction modes, the potential and feasibility of voice interaction in automotive HMI experience design are concluded. Then, the related theories of voice interaction, identification technologies, human beings' cognitive models of voices and voice design methods are further explored. And the research priority of this paper is proposed, i.e. how to design voice interaction to create more humane task-oriented dialogue scenarios to enhance interactive experiences of automotive HMI. The specific scenarios in driving behaviors suitable for the use of voice interaction are studied and classified, and the usability principles and key elements for automotive HMI voice design are proposed according to the scenario features. Then, through the user participatory usability testing experiment, the dialogue processes of voice interaction in automotive HMI are defined. The logics and grammars in voice interaction are classified according to the experimental results, and the mental models in the interaction processes are analyzed. At last, the voice interaction design method to create the humane task-oriented dialogue scenarios in the driving environment is proposed.

Using SNOMED CT to represent two interface terminologies.

Science.gov (United States)

Rosenbloom, S Trent; Brown, Steven H; Froehling, David; Bauer, Brent A; Wahner-Roedler, Dietlind L; Gregg, William M; Elkin, Peter L

2009-01-01

Interface terminologies are designed to support interactions between humans and structured medical information. In particular, many interface terminologies have been developed for structured computer based documentation systems. Experts and policy-makers have recommended that interface terminologies be mapped to reference terminologies. The goal of the current study was to evaluate how well the reference terminology SNOMED CT could map to and represent two interface terminologies, MEDCIN and the Categorical Health Information Structured Lexicon (CHISL). Automated mappings between SNOMED CT and 500 terms from each of the two interface terminologies were evaluated by human reviewers, who also searched SNOMED CT to identify better mappings when this was judged to be necessary. Reviewers judged whether they believed the interface terms to be clinically appropriate, whether the terms were covered by SNOMED CT concepts and whether the terms' implied semantic structure could be represented by SNOMED CT. Outcomes included concept coverage by SNOMED CT for study terms and their implied semantics. Agreement statistics and compositionality measures were calculated. The SNOMED CT terminology contained concepts to represent 92.4% of MEDCIN and 95.9% of CHISL terms. Semantic structures implied by study terms were less well covered, with some complex compositional expressions requiring semantics not present in SNOMED CT. Among sampled terms, those from MEDCIN were more complex than those from CHISL, containing an average 3.8 versus 1.8 atomic concepts respectively, pterms.

Implementation of regional centres for SPECT QC/QA in Brazil

International Nuclear Information System (INIS)

Robilotta, C.C.; Dias-Neto, A.L.; Abe, R.; Khoury, H.J.; Silva, D.C. da; Martini, J.C.; Brunetto, S.; Ney, C.

2002-01-01

large country as Brazil, where only a handful of accredited nuclear medicine physicists are available. Work still needs to be done in order to educate the clinicians on the advantages of having a routine QC programme implemented as, ultimately, this will assure the quality of diagnostics in nuclear medicine. We also believe that the regional centres should extend their functions as training sites for other physicists and technologists and 5 of them are already working for this purpose

A basic experimental study on characteristics of on-line human information processing associated with man-machine interface

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu; Shimoda, Hiroshi; Nagai, Yoshinori; Kojima, Shin-ichi.

1990-01-01

Regarding human factors research on man-machine interface, a basic psychological experiment was conducted to observe psycho-physiological characteristics of on-line human cognitive behavior when cognitive tasks on learning and pattern classification were given to subjects by personal computer using a simple state transition model. During the experiment, three different types of subjects' data were recorded: (i) eye movement data by eye mark recorder, (ii) physio-electric signals by polygraph and (iii) verbal reports. Those subjects' data were analyzed with respect to: (i) the related human cognitive characteristics concerning problem solving strategy, measures of problem difficulty and mental image effect, (ii) observed eye movement characteristics such as saccade, attention, pupil reaction and blinking, etc., and (iii) obtained characteristics of skin potential response and heart rate. It was found that the application of psycho-physiological measurement would serve to objective and detailed analysis of on-line cognitive process. (author)

Ultimate gradient in solid-state accelerators

International Nuclear Information System (INIS)

Whittum, D.H.

1998-08-01

The authors recall the motivation for research in high-gradient acceleration and the problems posed by a compact collider. They summarize the phenomena known to appear in operation of a solid-state structure with large fields, and research relevant to the question of the ultimate gradient. They take note of new concepts, and examine one in detail, a miniature particle accelerator based on an active millimeter-wave circuit and parallel particle beams

Rowing, the ultimate challenge to the human body - implications for physiological variables

DEFF Research Database (Denmark)

Volianitis, S.; Secher, Niels H.

2009-01-01

Clinical diagnoses depend on a variety of physiological variables but the full range of these variables is seldom known. With the load placed on the human body during competitive rowing, the physiological range for several variables is illustrated. The extreme work produced during rowing...... is explained by the seated position and the associated ability to increase venous return and, thus, cardiac output. This review highlights experimental work on Olympic rowing that presents a unique challenge to the human capacities, including cerebral metabolism, to unprecedented limits, and provides a unique...

Simulation-based man-machine interface evaluation for plant maintenance facilities

International Nuclear Information System (INIS)

Nakagawa, Takashi; Kitamura, Masashi; Nakatani, Yoshio; Umeda, Yoshikazu

1998-01-01

Although a lot of human errors has occurred in the maintenance of power plants, systematic approaches to the reduction of human error are not sufficient compared with those applied to operations. The authors propose a new method of evaluating and analyzing human interface design from the viewpoint of human error reduction, and have implemented the method on the DIAS system. This system consists of maintenance personnel and equipment interface simulators, and it generates a dynamic interaction between humans and the working environment. The DIAS system can calculate the human error rate and their weighted calculations according to dangerousness, the influence on the equipment, and the influence on the plant of each task by THERP, and can carry out the dynamic analysis of the panel selection error index if there is similar equipment in the neighborhood, the working time, the distance of movement, and the distance of eye movement. The authors applied this system to evaluate the interface design of actual Transformer Protection Relay Panels and their layout in a room in a nuclear power plant. Our customer accepted our evaluation and proposals modifying the panel design. (author)

Users expect interfaces to behave like the physical world

DEFF Research Database (Denmark)

Nørager, Rune

2006-01-01

Navigation in folder structures is an essential part of most window based user interfaces. Basic human navigation strategies rely on stable properties of the physical world, which are not by default present in windows style user interfaces. According to the theoretical framework Ecological Cognit...

78 FR 69101 - Agency Information Collection Activities: Declaration of the Ultimate Consignee That Articles...

Science.gov (United States)

2013-11-18

... Activities: Declaration of the Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...: Title: Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...

Carbon Burial at the Land Ocean Interface: Climate vs Human Drivers

Science.gov (United States)

Bianchi, T. S.; Smeaton, C.; Cui, X.; Howe, J. A.; Austin, W.

2017-12-01

Fjords are connectors between the terrestrial and marine systems and are known as globally significant hotspots for the burial (Smith et al., 2014) and long-term storage (Smeaton et al., 2016) of carbon (C). The glacial geomorphology of fjords and their catchment results in the terrestrial and marine environments being strongly coupled more so than other estuary types. The clearest example of this is the terrestrial C subsidy to these sediment, it is estimated that globally 55-62% of C held in fjord sediments are terrestrially derived (Cui et al., 2016). Yet it is largely unknown how climatic and human forcing drives the transfer of terrestrial C to marine sediments. Here we, examine the role of late Holocene climate and human activity on the transfer of C from the terrestrial to marine environment along the North Atlantic Margin. Loch Sunart a Scottish fjord sits at the land ocean interface of the North Atlantic. The catchment of the fjord has been shown to be sensitive to local and regional climatic change (Gillibrand et al., 2005) and the fjord sediments have been able to record these changes in Climate (Cage and Austin, 2010). Using a long (22 m) sedimentary record we discuss our understanding of mid to late Holocene regional climate and its impact on terrestrial C transfer to the coastal ocean. Alongside this we examine the role of humans on the landscape and their impact on the transfer of terrestrial C on the coastal ocean. The results from this study will further our understanding of the long-term drivers of terrestrial C transfer to the coastal ocean. Potentially this research provides insights on future C transfers under a changing future climate allowing the importance of fjords as a climate regulation service to be reassessed.

Computer-Based Tools for Evaluating Graphical User Interfaces

Science.gov (United States)

Moore, Loretta A.

1997-01-01

The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

River Protection Project: Interface Management in the Multi Contract Project Environment at Hanford

International Nuclear Information System (INIS)

SHIKASHIO, L.A.

2000-01-01

The Office of River Protection (ORP) is implementing the River Protection Project (RPP) using two prime contractors. CH2M Hill Hanford Group, Inc. (CHG) is responsible for operating the existing tank system, delivering the waste feed to the waste treatment plant, and managing the resulting low- and high-level glass waste ''product'' through a performance-based fee type contract. A separate prime contractor will be responsible for designing, constructing and commissioning of a new Waste Treatment and Immobilization Plant (WTP), and preparing the waste for ultimate disposal. In addition to the prime contractors and their interfaces, the River Protection Project is being conducted on the Hanford Site, which is under the management of another DOE organization, DOE Richland Field Office (DOE-RL). The infrastructure and utilities are provided by DOE-RL, for example. In addition, there are multiple other technical interfaces with federal, state and other regulatory agencies that influence the management of the activities. This paper provides an overview of the approach employed by ORP to identify, coordinate, and manage the technical interfaces of RPP. In addition, this paper describes the approach and methodologies used to: Establish an overall framework for interface management. Establish the requirements for defining and managing interfaces for the prime contractors and DOE. Contractually requiring the prime contractors to control and manage the interfaces

Implementation of EPICS based vacuum control system for variable energy cyclotron centre, Kolkata

Science.gov (United States)

Roy, Anindya; Bhole, R. B.; Nandy, Partha P.; Yadav, R. C.; Pal, Sarbajit; Roy, Amitava

2015-03-01

The vacuum system of the Room Temperature (K = 130) Cyclotron of Variable Energy Cyclotron Centre is comprised of vacuum systems of main machine and Beam Transport System. The vacuum control system is upgraded to a PLC based Automated system from the initial relay based Manual system. The supervisory control of the vacuum system is implemented in Experimental Physics and Industrial Control System (EPICS). An EPICS embedded ARM based vacuum gauge controller is developed to mitigate the requirement of vendor specific gauge controller for gauges and also for seamless integration of the gauge controllers with the control system. A set of MS-Windows ActiveX components with embedded EPICS Channel Access interface are developed to build operator interfaces with less complex programming and to incorporate typical Windows feature, e.g., user authentication, file handling, better fonts, colors, mouse actions etc. into the operator interfaces. The control parameters, monitoring parameters, and system interlocks of the system are archived in MySQL based EPICS MySQL Archiver developed indigenously. In this paper, we describe the architecture, the implementation details, and the performance of the system.

Implementation of EPICS based vacuum control system for variable energy cyclotron centre, Kolkata

Energy Technology Data Exchange (ETDEWEB)

Roy, Anindya, E-mail: r-ani@vecc.gov.in; Bhole, R. B.; Nandy, Partha P.; Yadav, R. C.; Pal, Sarbajit; Roy, Amitava [Variable Energy Cyclotron Centre, 1/AF Bidhan Nagar, Kolkata 700064 (India)

2015-03-15

The vacuum system of the Room Temperature (K = 130) Cyclotron of Variable Energy Cyclotron Centre is comprised of vacuum systems of main machine and Beam Transport System. The vacuum control system is upgraded to a PLC based Automated system from the initial relay based Manual system. The supervisory control of the vacuum system is implemented in Experimental Physics and Industrial Control System (EPICS). An EPICS embedded ARM based vacuum gauge controller is developed to mitigate the requirement of vendor specific gauge controller for gauges and also for seamless integration of the gauge controllers with the control system. A set of MS-Windows ActiveX components with embedded EPICS Channel Access interface are developed to build operator interfaces with less complex programming and to incorporate typical Windows feature, e.g., user authentication, file handling, better fonts, colors, mouse actions etc. into the operator interfaces. The control parameters, monitoring parameters, and system interlocks of the system are archived in MySQL based EPICS MySQL Archiver developed indigenously. In this paper, we describe the architecture, the implementation details, and the performance of the system.

Implementation of EPICS based vacuum control system for variable energy cyclotron centre, Kolkata

International Nuclear Information System (INIS)

Roy, Anindya; Bhole, R. B.; Nandy, Partha P.; Yadav, R. C.; Pal, Sarbajit; Roy, Amitava

2015-01-01

The vacuum system of the Room Temperature (K = 130) Cyclotron of Variable Energy Cyclotron Centre is comprised of vacuum systems of main machine and Beam Transport System. The vacuum control system is upgraded to a PLC based Automated system from the initial relay based Manual system. The supervisory control of the vacuum system is implemented in Experimental Physics and Industrial Control System (EPICS). An EPICS embedded ARM based vacuum gauge controller is developed to mitigate the requirement of vendor specific gauge controller for gauges and also for seamless integration of the gauge controllers with the control system. A set of MS-Windows ActiveX components with embedded EPICS Channel Access interface are developed to build operator interfaces with less complex programming and to incorporate typical Windows feature, e.g., user authentication, file handling, better fonts, colors, mouse actions etc. into the operator interfaces. The control parameters, monitoring parameters, and system interlocks of the system are archived in MySQL based EPICS MySQL Archiver developed indigenously. In this paper, we describe the architecture, the implementation details, and the performance of the system

Toughness amplification in copper/epoxy joints through pulsed laser micro-machined interface heterogeneities

KAUST Repository

Hernandez Diaz, Edwin

2017-11-21

This work addresses the mechanics of debonding along copper/epoxy joints featuring patterned interfaces. Engineered surface heterogeneities with enhanced adhesion properties are generated through pulsed laser irradiation. Peel tests are carried out to ascertain the effect of patterns shape and area fraction on the mechanical response. Experimental results are evaluated with the support of three-dimensional finite element simulations based on the use of cohesive surfaces. Results discussion is largely framed in terms of effective peel force and energy absorbed to sever the samples. It is shown that surface heterogeneities act as sites of potential crack pinning able to trigger crack initiation, propagation and arrest. Surface patterns ultimately enable a remarkable increase in the effective peel force and dissipated energy with respect to baseline homogeneous sanded interface.

Toughness amplification in copper/epoxy joints through pulsed laser micro-machined interface heterogeneities

KAUST Repository

Diaz, Edwin Hernandez; Alfano, Marco; Pulungan, Ditho Ardiansyah; Lubineau, Gilles

2017-01-01

This work addresses the mechanics of debonding along copper/epoxy joints featuring patterned interfaces. Engineered surface heterogeneities with enhanced adhesion properties are generated through pulsed laser irradiation. Peel tests are carried out to ascertain the effect of patterns shape and area fraction on the mechanical response. Experimental results are evaluated with the support of three-dimensional finite element simulations based on the use of cohesive surfaces. Results discussion is largely framed in terms of effective peel force and energy absorbed to sever the samples. It is shown that surface heterogeneities act as sites of potential crack pinning able to trigger crack initiation, propagation and arrest. Surface patterns ultimately enable a remarkable increase in the effective peel force and dissipated energy with respect to baseline homogeneous sanded interface.

Historic town centre management - The real estate industry

Directory of Open Access Journals (Sweden)

Ciubotaru Mihai

2018-01-01

Full Text Available In modern times, many of the socio-economic aspects of our lives (beside the classical understanding of the term industry “evolved(?” into industries: music, arts in general, sports, education, health....have become professionally managed industries. Historical town centres provide goods and services and, in this context, can be regarded as industries, as a whole. All the elements of an industry can be identified in these complex “places”: provision of goods and services, human resources issues, technology, marketing, regulatory and legal aspects, management...all of which pointing towards an approach that needs to be looked at as such. The most important industry in hist oric town centres is the real estate industry.

Using the Electrocorticographic Speech Network to Control a Brain-Computer Interface in Humans

Science.gov (United States)

Leuthardt, Eric C.; Gaona, Charles; Sharma, Mohit; Szrama, Nicholas; Roland, Jarod; Freudenberg, Zac; Solis, Jamie; Breshears, Jonathan; Schalk, Gerwin

2013-01-01

Electrocorticography (ECoG) has emerged as a new signal platform for brain-computer interface (BCI) systems. Classically, the cortical physiology that has been commonly investigated and utilized for device control in humans has been brain signals from sensorimotor cortex. Hence, it was unknown whether other neurophysiological substrates, such as the speech network, could be used to further improve on or complement existing motor-based control paradigms. We demonstrate here for the first time that ECoG signals associated with different overt and imagined phoneme articulation can enable invasively monitored human patients to control a one-dimensional computer cursor rapidly and accurately. This phonetic content was distinguishable within higher gamma frequency oscillations and enabled users to achieve final target accuracies between 68 and 91% within 15 minutes. Additionally, one of the patients achieved robust control using recordings from a microarray consisting of 1 mm spaced microwires. These findings suggest that the cortical network associated with speech could provide an additional cognitive and physiologic substrate for BCI operation and that these signals can be acquired from a cortical array that is small and minimally invasive. PMID:21471638

Soft Material-Enabled, Flexible Hybrid Electronics for Medicine, Healthcare, and Human-Machine Interfaces.

Science.gov (United States)

Herbert, Robert; Kim, Jong-Hoon; Kim, Yun Soung; Lee, Hye Moon; Yeo, Woon-Hong

2018-01-24

Flexible hybrid electronics (FHE), designed in wearable and implantable configurations, have enormous applications in advanced healthcare, rapid disease diagnostics, and persistent human-machine interfaces. Soft, contoured geometries and time-dynamic deformation of the targeted tissues require high flexibility and stretchability of the integrated bioelectronics. Recent progress in developing and engineering soft materials has provided a unique opportunity to design various types of mechanically compliant and deformable systems. Here, we summarize the required properties of soft materials and their characteristics for configuring sensing and substrate components in wearable and implantable devices and systems. Details of functionality and sensitivity of the recently developed FHE are discussed with the application areas in medicine, healthcare, and machine interactions. This review concludes with a discussion on limitations of current materials, key requirements for next generation materials, and new application areas.

''Project Crystal'' for ultimate storage of highly radioactive waste

International Nuclear Information System (INIS)

Anon.

1983-01-01

NAGRA (The National Association for storage of radioactive waste) in Baden has launched in North Switzerland an extensive geological research program. The current research program, under the title of ''Project Crystal'', aims at providing the scientific knowledge which is required for the assessment of the suitability of the crystalline sub-soil of North Switzerland for the ultimate storage of highly radioactive waste. Safety and feasibility of such ultimate storage are in the forefront of preoccupations. Scientific institutes of France, Germany, USA and Canada are cooperating more particularly on boring research and laboratory analyses. Technical data are given on the USA and German installations used. (P.F.K.)

Canadian Irradiation Centre

International Nuclear Information System (INIS)

1987-05-01

The Canadian Irradiation Centre is a non-profit cooperative project between Atomic Energy of Canada Limited, Radiochemical Company and Universite du Quebec, Institut Armand-Frappier, Centre for Applied Research in Food Science. The Centre's objectives are to develop, demonstrate and promote Canada's radiation processing technology and its applications by conducting applied research; training technical, professional and scientific personnel; educating industry and government; demonstrating operational and scientific procedures; developing processing procedures and standards, and performing product and market acceptance trials. This pamphlet outlines the history of radoation technology and the services offered by the Canadian Irradiation Centre

Report on the results of the FY1999 standardization for new standard interface protocol for electrical measuring use; 1999 nendo shinki sangyo ikusei sokkogata kokusai hyojun kaihatsu jigyo seika hokokusho. Denki keisokukiyo shinhyojun interface purotokoru no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The purpose of this project is to create a new protocol for electric measuring instruments that use a built-in the Universal Serial Bus (USB) interface which is no incorporated in PCs. This new interface will replace the existing GPIB interface (IEEE-488), which is currently used in electric measuring instruments as standard interface. Our goal is to create a protocol that will provide the same data rate as GPIB and better connectivity. To evaluate our new protocol, we create virtual instruments using evaluation boards for USB chips, as well as software, and performed transfer tests to isolate and solve problems found in the tests. We will make the protocol and the software available for general use, and register the protocol as a standard to the USB Developer's Forum, a body that manages USB standards, to make it as a de facto standard. Ultimately we are aiming at making it an international standard. (NEDO)

Influence of cracks and pitting corrosion on residual ultimate strength of stiffened plates

Directory of Open Access Journals (Sweden)

ZHANG Jing

2018-02-01

Full Text Available [Objectives] Ships and offshore platforms serve in the harsh sea environment for a long time. Cracks and pitting corrosion will occur in such a structure and the damage will affect its ultimate strength.[Methods] To investigate the influence of cracks and pitting corrosion on ultimate bearing capacity, the ultimate strength of a structure under axial compression is studied by using a nonlinear finite element. The mesh size of a stiffened plate with cracks and pitting corrosion is first discussed. Then the influence of the relative positions of cracks and pitting corrosion, number of corrosion points and crack length impact on the residual ultimate strength of damaged stiffened plates is discussed via a series of calculations.[Results] The results indicate that the increase in crack length and pitting corrosion significantly decreases the ultimate strength of a stiffened plate. [Conclusions] This provides a useful reference for designing and maintaining ships and offshore structures in their life cycles.

Concept of software interface for BCI systems

Science.gov (United States)

Svejda, Jaromir; Zak, Roman; Jasek, Roman

2016-06-01

Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

User interface design in safety parameter display systems

International Nuclear Information System (INIS)

Schultz, E.E. Jr.; Johnson, G.L.

1988-01-01

The extensive installation of computerized safety Parameter Display Systems (SPDSs) in nuclear power plants since the Three-Mile Island accident has enhanced plant safety. It has also raised new issues of how best to ensure an effective interface between human operators and the plant via computer systems. New developments in interface technologies since the current generation of SPDSs was installed can contribute to improving display interfaces. These technologies include new input devices, three-dimensional displays, delay indicators, and auditory displays. Examples of how they might be applied to improve current SPDSs are given. These examples illustrate how the new use interface technology could be applied to future nuclear plant displays

Bhabha Atomic Research Centre: annual report 1986-87

International Nuclear Information System (INIS)

1987-01-01

The Research and Development (R and D) work and achievements of the Bhabha Atomic Research Centre, Bombay, during the financial year 1986-1987 are reported. The R and D activities of BARC cover the entire nuclear fuel cycle, production and use of radioisotopes, radiation protection and also basic research in several disciplines. The report is presented in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Science, Life Sciences, Radioisotopes, Reactors, Fuel Cycle, Health and Safety, Electronics and Instrumentation, Engineering and General Services. At the end of each chapter are listed the journal articles published, the paper presented at conferences, symposia etc. and technical reports issued by the scientists of BARC in the subject field indicated by the title of the chapter. The R and D work of the outstation units of BARC, namely, Nuclear Research Laboratory at Srinagar, High Altitute Research Laboratory at Gulmarg, Variable Energy Cyclotron Centre at Calcutta and Gauribidanur Seismic Array near Bangalore are also described in the report. The report concludes with a brief account of: (1) transfer of technologies developed at the Centre, (2) activities related to human resource development for nuclear programmes of the country, and (3) progress of design and construction work of Centre for Advanced Technology at Indore. (M.G.B.)

Mechanically Enhanced Liquid Interfaces at Human Body Temperature Using Thermosensitive Methylated Nanocrystalline Cellulose.

Science.gov (United States)

Scheuble, N; Geue, T; Kuster, S; Adamcik, J; Mezzenga, R; Windhab, E J; Fischer, P

2016-02-09

The mechanical performance of materials at oil/water interfaces after consumption is a key factor affecting hydrophobic drug release. In this study, we methylated the surface of nanocrystalline cellulose (NCC) by mercerization and dimethyl sulfate exposure to produce thermosensitive biopolymers. These methylated NCC (metNCC) were used to investigate interfacial thermogelation at air/water and medium-chain triglyceride (MCT)/water interfaces at body temperature. In contrast to bulk fluid dynamics, elastic layers were formed at room temperature, and elasticity increased significantly at body temperature, which was measured by interfacial shear and dilatational rheology in situ. This unique phenomenon depends on solvent quality, temperature, and polymer concentration at interfaces. Thus, by adjusting the degree of hydrophobicity of metNCC, the interfacial elasticity and thermogelation of the interfaces could be varied. In general, these new materials (metNCC) formed more brittle interfacial layers compared to commercial methylcellulose (MC A15). Thermogelation of methylcellulose promotes attractive intermolecular forces, which were reflected in a change in self-assembly of metNCC at the interface. As a consequence, layer thickness and density increased as a function of temperature. These effects were measured by atomic force microscopy (AFM) images of the displaced interface and confirmed by neutron reflection. The substantial structural and mechanical change of methylcellulose interfaces at body temperature represents a controllable encapsulation parameter allowing optimization of lipid-based drug formulations.

GUIDANCE FOR NUCLEAR POWER PLANT CONTROL ROOM AND HUMAN-SYSTEM INTERFACE MODERNIZATION

International Nuclear Information System (INIS)

Naser, J.; Morris, G.

2004-01-01

Several nuclear power plants in the United States are starting instrumentation and control (I and C) modernization programs using digital equipment to address obsolescence issues and the need to improve plant performance while maintaining high levels of safety. As an integral part of the I and C modernization program at a nuclear power plant, the control room and other human-system interfaces (HSIs) are also being modernized. To support safe and effective operation, it is critical to plan, design, implement, train for, operate, and maintain the control room and HSI changes to take advantage of human cognitive processing abilities. A project, jointly funded by the Electric Power Research Institute (EPRI) and the United States Department of Energy (DOE) under the Nuclear Energy Plant Optimization (NEPO) Program, is developing guidance for specifying and designing control rooms, remote shut-down panels, HSIs etc. The guidance is intended for application by utilities and suppliers of control room and HSI modernization. The guidance will facilitate specification, design, implementation, operations, maintenance, training, and licensing activities. This guidance will be used to reduce the likelihood of human errors and licensing risk, to gain maximum benefit of implemented technology, and to increase performance. The guidance is of five types. The first is planning guidance to help a utility develop its plant-specific control room operating concepts, its plant-specific endpoint vision for the control room, its migration path to achieve that endpoint vision, and its regulatory, licensing, and human factors program plans. The second is process guidance for general HSI design and integration, human factors engineering analyses, verification and validation, in-service monitoring processes, etc. The third is detailed human factors engineering guidance for control room and HSI technical areas. The fourth is guidance for licensing. The fifth is guidance for special topics

Developing a Prototype ALHAT Human System Interface for Landing

Science.gov (United States)

Hirsh, Robert L.; Chua, Zarrin K.; Heino, Todd A.; Strahan, Al; Major, Laura; Duda, Kevin

2011-01-01

The goal of the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project is to safely execute a precision landing anytime/anywhere on the moon. This means the system must operate in any lighting conditions, operate in the presence of any thruster generated regolith clouds, and operate without the help of redeployed navigational aids or prepared landing site at the landing site. In order to reach this ambitious goal, computer aided technologies such as ALHAT will be needed in order to permit these landings to be done safely. Although there will be advanced autonomous capabilities onboard future landers, humans will still be involved (either onboard as astronauts or remotely from mission control) in any mission to the moon or other planetary body. Because many time critical decisions must be made quickly and effectively during the landing sequence, the Descent and Landing displays need to be designed to be as effective as possible at presenting the pertinent information to the operator, and allow the operators decisions to be implemented as quickly as possible. The ALHAT project has established the Human System Interface (HSI) team to lead in the development of these displays and to study the best way to provide operators enhanced situational awareness during landing activities. These displays are prototypes that were developed based on multiple design and feedback sessions with the astronaut office at NASA/ Johnson Space Center. By working with the astronauts in a series of plan/build/evaluate cycles, the HSI team has obtained astronaut feedback from the very beginning of the design process. In addition to developing prototype displays, the HSI team has also worked to provide realistic lunar terrain (and shading) to simulate a "out the window" view that can be adjusted to various lighting conditions (based on a desired date/time) to allow the same terrain to be viewed under varying lighting terrain. This capability will be critical to determining the

A rapid assessment of service deliveries at Anganwadi Centres in Ranchi district of Jharkhand