Effects of two-phase flow on the deflagration of porous energetic materials
Energy Technology Data Exchange (ETDEWEB)
Margolis, S.B. [Sandia National Labs., Livermore, CA (United States); Williams, F.A. [Univ. of California, San Diego, La Jolla, CA (United States). Dept. of Applied Mechanics and Engineering Sciences
1994-07-01
Theoretical analyses are developed for the multi-phase deflagration of porous energetic solids, such as degraded nitramine propellants, that experience significant gas flow in the solid preheat region and are characterized by the presence of exothermic reactions in a bubbling melt layer at their surfaces. Relative motion between the gas and condensed phases is taken into account in both regions, and expressions for the mass burning rate and other quantities of interest, such as temperature and volume-fraction profiles, are derived by activation-energy asymptotics. The model extends recent work by allowing for gas flow in the unburned solid, and by incorporating pressure effects through the gas-phase equation of state. As a consequence, it is demonstrated how most aspects of the deflagration wave, including its structure, propagation speed and final temperature, depend on the local pressure in the two-phase regions.
A Family of Reference Hugoniots for Two-phase Porous Materials
2015-06-01
material, which are the adiabatic compression of the gaseous phase and the heat due to plastic work generated from the deformation of particles. The...heating mechanisms mentioned in the literature [7] are cracking, adiabatic shear banding, cumulative jetting, etc. In addition, the flow from the... compression and adiabatic expansion of condensed substances, [in Russian], Sarov, Russian Federal Nuclear Centre - VNIIEF, 2nd ed., 2006. 13. van Thiel M
Coupling two-phase fluid flow with two-phase darcy flow in anisotropic porous media
Chen, J.
2014-06-03
This paper reports a numerical study of coupling two-phase fluid flow in a free fluid region with two-phase Darcy flow in a homogeneous and anisotropic porous medium region. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the anisotropic porous medium region. A Robin-Robin domain decomposition method is used for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Obtained results have shown the anisotropic properties effect on the velocity and pressure of the two-phase flow. 2014 Jie Chen et al.
Breakup structure of two-phase jets with various momentum flux from a porous injector
Lee, Inchul; Kim, Dohun; Koo, Jaye
2014-02-01
Spray structure and atomization characteristics were investigated through a comparison of a porous and a shear coaxial injector. The porous injector shows better atomization performance than the shear coaxial injector. To increase atomization performance and mixing efficiency of two-phase jets, a coaxial porous injector which can be applicable to liquid rocket combustors was designed and tested. The characteristics of atomization and spray from a porous and a shear coaxial injector were characterized by the momentum flux ratio. The breakup mechanism of the porous injector is governed by Taylor-Culick flow and axial shear forces. Momentum of injected gas flow through a porous material which is composed of sintered metal is radically transferred to the center of the liquid column, and then liquid column is effectively broken up. Although the shapes of spray from porous and shear coaxial jets were similar for various momentum ratio, spray structures such as spray angle and droplet sizes were different. As increasing the momentum flux ratio, SMD from the porous injector showed smaller value than the shear coaxial injector
Shadow imaging in bubbly gas-liquid two-phase flow in porous structures
Altheimer, Marco; Häfeli, Richard; Wälchli, Carmen; Rudolf von Rohr, Philipp
2015-09-01
Shadow imaging is used for the investigation of bubbly gas-liquid two-phase flow in a porous structure. The porous structure is made of Somos WaterShed XC 11122, a clear epoxy resin used in rapid prototyping. Optical access is provided by using an aqueous solution of sodium iodide and zinc iodide having the same refractive index as the structure material (). Nitrogen is injected into the continuous phase at volumetric transport fractions in the range of resulting in a hold-up of . The obtained images of overlapping bubble shadows are processed to measure the bubble dimensions. Therefore, a new processing sequence is developed to determine bubble dimensions from overlapping bubble shadows by ellipse fitting. The accuracy of the bubble detection and sizing routine is assessed processing synthetic images. It is shown that the developed technique is suitable for volumetric two-phase flow measurements. Important global quantities such as gas hold-up and total interfacial area can be measured with only one camera. Operation parameters for gas-liquid two-phase flows are determined to improve mass and heat transfer between the phases.
Two phase flow and heat transfer in porous beds under variable body forces, part 2
Evers, J. L.; Henry, H. R.
1969-01-01
Analytical and experimental investigations of a pilot model of a channel for the study of two-phase flow under low or zero gravity are presented. The formulation of dimensionless parameters to indicate the relative magnitude of the effects of capillarity, gravity, pressure gradient, viscosity, and inertia is described. The investigation is based on the principal equations of fluid mechanics and thermodynamics. Techniques were investigated by using a laser velocimeter for measuring point velocities of the fluid within the porous material without disturbing the flow.
Targeted Delivery by Smart Capsules for Controlling Two-phase Flow in Porous Media
Fan, J.; Weitz, D.
2015-12-01
Understanding and controlling two-phase flow in porous media are of particular importance to the relevant industry applications, such as enhanced oil recovery, CO2 sequestration, and groundwater remediation. We develop a variety of smart microcapsules that can deliver and release specific substances to the target location in the porous medium, and therefore change the fluid property or medium geometry at certain locations. In this talk, I will present two types of smart capsules for (a) delivering surfactant to the vicinity of oil-water interface and (b) delivering microgels to the high permeability region and therefore blocking the pore space there, respectively. We also show that flooding these two capsules into porous media effectively reduces the trapped oil and improves the homogeneity of the medium, respectively. Besides of its industrial applications, this technique also opens a new window to study the mechanism of two-phase flow in porous media.
Monte Carlo simulation of a two-phase flow in an unsaturated porous media
Directory of Open Access Journals (Sweden)
Xu Peng
2012-01-01
Full Text Available Relative permeability is a significant transport property which describes the simultaneous flow of immiscible fluids in porous media. A pore-scale physical model is developed for the two-phase immiscible flow in an unsaturated porous media according to the statistically fractal scaling laws of natural porous media, and a predictive calculation of two-phase relative permeability is presented by Monte Carlo simulation. The tortuosity is introduced to characterize the highly irregular and convoluted property of capillary pathways for fluid flow through a porous medium. The computed relative permeabilities are compared with empirical formulas and experimental measurements to validate the current model. The effect of fractal dimensions and saturation on the relative permeabilities is also discussed
Effects of gravity and inlet location on a two-phase countercurrent imbibition in porous media
El-Amin, Mohamed
2012-01-01
We introduce a numerical investigation of the effect of gravity on the problem of two-phase countercurrent imbibition in porous media. We consider three cases of inlet location, namely, from, side, top, and bottom. A 2D rectangular domain is considered for numerical simulation. The results indicate that gravity has a significant effect depending on open-boundary location.
Nonequilibrium capillarity effects in two-phase flow through porous media at different scales
Bottero, S.; Hassanizadeh, S.M.; Kleingeld, P.J.; Heimovaara, T.J.
2011-01-01
A series of primary drainage experiments was carried out in order to investigate nonequilibrium capillarity effects in two-phase flow through porous media. Experiments were performed with tetrachloroethylene (PCE) and water as immiscible fluids in a sand column 21 cm long. Four drainage experiments
Trapping and hysteresis in two-phase flow in porous media: A pore-network study
Joekar-Niasar, V.|info:eu-repo/dai/nl/30484229X; Doster, F.; Armstrong, R.T.; Wildenschild, D.; Celia, M.A.
2013-01-01
Several models for two-phase ﬂow in porous media identify trapping and connectivityof ﬂuids as an important contribution to macroscale hysteresis. This is especially true forhysteresis in relative permeabilities. The trapping models propose trajectories from theinitial saturation to the end saturati
Effects of Gravity and Inlet Location on a Two-Phase Countercurrent Imbibition in Porous Media
Directory of Open Access Journals (Sweden)
M. F. El-Amin
2012-01-01
Full Text Available We introduce a numerical investigation of the effect of gravity on the problem of two-phase countercurrent imbibition in porous media. We consider three cases of inlet location, namely, from, side, top, and bottom. A 2D rectangular domain is considered for numerical simulation. The results indicate that gravity has a significant effect depending on open-boundary location.
Measurement of Two Phase Flow in Porous Medium Using High-resolution Magnetic Resonance Imaging
Institute of Scientific and Technical Information of China (English)
JIANG Lanlan; SONG Yongchen; LIU Yu; YANG Mingjun; ZHU Ningjun; WANG Xiaojing; DOU Binlin
2013-01-01
Measurement of two phase flow in porous medium for sequestration was carried out using high-resolution magnetic resonance imaging (MRI) technique.The porous medium was a packed bed of glass beads.Spin echo multi sequence was used to measure the distribution of CO2 and water in the porous medium.The intensity images show that the fluid distribution is non-uniform due to its viscosity and pore structure of porous medium.The velocity distribution of fluids is calculated from the saturation of water and porosity of porous medium.The experimental results show that fluid velocities vary with time and position.The capillary dispersion rate donated the effects of capillary,which was largest at water saturations of 0.45.The displacement process is different between in BZ-02 and BZ-2.The final water residual saturation depends on permeability and porosity.
Energy Technology Data Exchange (ETDEWEB)
BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.
1999-11-09
Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.
The solidification of two-phase heterogeneous materials: Theory versus experiment
Institute of Scientific and Technical Information of China (English)
ZHANG Bin; KIM Tongbeum; LU TianJian
2009-01-01
The solidification behavior of two-phase heterogeneous materials such as close-celled aluminum foams was analytically studied. The proposed analytical model can precisely predict the location of solidification front as well as the full solidification time for a two-phase heterogeneous material composed of aluminum melt and non-conducting air pores. Experiments using distilled water simulating the aluminum melt to be solidified (frozen) were subsequently conducted to validate the analytical model for two selected porosities (ε), ε=0 and 0.5. Full numerical simulations with the method of finite difference were also performed to examine the influence of pore shape on solidification. The remarkable agreement between theory and experiment suggests that the delay of solidification in the two-phase heterogeneous material is mainly caused by the reduction of bulk thermal conductivity due to the presence of pores, as this is the sole mechanism accounted for by the analytical model for solidification in a porous medium.
Comparison of Experimental and Numerical Two-Phase Flows in a Porous Micro-Model
Directory of Open Access Journals (Sweden)
Dustin Crandall
2009-12-01
Full Text Available Characterizing two-phase flow in porous media is important to provide estimates of sweep efficiency in enhanced oil recovery and storage estimates in potential geological CO2 sequestration repositories. To further the current understanding of two-phase flow in porous media a micro-model of interconnected channels was designed and fabricated using stereolithography to experimentally study gas-liquid flows. This flowcell was created with a wide variability of throat dimensions to represent naturally occurring porous media. Low flow rate experiments of immiscible two-phase drainage were performed within this cell. Additionally, a computational model for analyzing two-phase flows in the same flowcell was developed and used to simulate conditions not possible with our laboratory settings. The computational model was first tested for the identical conditions used in the experimental studies, and was shown to be in good agreement with the experimentally determined fractal dimension of the invading gas structure, time until breakthrough, and fluid saturation. The numerical model was then used to study two-phase air-water flows in flowcells with the same geometry and different gas-liquid-solid contact angles. The percent saturation of air and the motion of the fluids through the cell were found to vary with changes in these parameters. Finally, to simulate flows expected during geologic carbon sequestration, the fluid properties and interface conditions were set to model the flow of CO2 into a brine-saturated porous medium at representative subsurface conditions. The CO2 flows were shown to have larger gas saturations than the previous air into water studies. Thus the accuracy of the computational model was supported by the flowcell experiments, and the computational model extended the laboratory results to conditions not possible with the apparatus used in the experiments.
Analysis of Fractional Flow for Transient Two-Phase Flow in Fractal Porous Medium
Lu, Ting; Duan, Yonggang; Fang, Quantang; Dai, Xiaolu; Wu, Jinsui
2016-03-01
Prediction of fractional flow in fractal porous medium is important for reservoir engineering and chemical engineering as well as hydrology. A physical conceptual fractional flow model of transient two-phase flow is developed in fractal porous medium based on the fractal characteristics of pore-size distribution and on the approximation that porous medium consist of a bundle of tortuous capillaries. The analytical expression for fractional flow for wetting phase is presented, and the proposed expression is the function of structural parameters (such as tortuosity fractal dimension, pore fractal dimension, maximum and minimum diameters of capillaries) and fluid properties (such as contact angle, viscosity and interfacial tension) in fractal porous medium. The sensitive parameters that influence fractional flow and its derivative are formulated, and their impacts on fractional flow are discussed.
Multi-level adaptive simulation of transient two-phase flow in heterogeneous porous media
Chueh, C.C.
2010-10-01
An implicit pressure and explicit saturation (IMPES) finite element method (FEM) incorporating a multi-level shock-type adaptive refinement technique is presented and applied to investigate transient two-phase flow in porous media. Local adaptive mesh refinement is implemented seamlessly with state-of-the-art artificial diffusion stabilization allowing simulations that achieve both high resolution and high accuracy. Two benchmark problems, modelling a single crack and a random porous medium, are used to demonstrate the robustness of the method and illustrate the capabilities of the adaptive refinement technique in resolving the saturation field and the complex interaction (transport phenomena) between two fluids in heterogeneous media. © 2010 Elsevier Ltd.
Adaptive moving grid methods for two-phase flow in porous media
Dong, Hao
2014-08-01
In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can handle the nonlinearities of the governing equations in an efficient way. The adaptive moving grid method is then used to distribute more grid points near the sharp interfaces, which enables us to obtain accurate numerical solutions with fewer computational resources. The numerical experiments indicate that the proposed moving mesh strategy could be an effective way to approximate two-phase flows in porous media. © 2013 Elsevier B.V. All rights reserved.
Modeling and simulation of nanoparticles transport in a two-phase flow in porous media
El-Amin, Mohamed
2012-01-01
In the current paper, a mathematical model to describe the nanoparticles transport carried by a two-phase flow in a porous medium is presented. Both capillary forces as well as Brownian diffusion are considered in the model. A numerical example of countercurrent water-oil imbibition is considered. We monitor the changing of the fluid and solid properties due to the addition of the nanoparticles using numerical experiments. Variation of water saturation, nanoparticles concentration and porosity ratio are investigated.
Multiphysics modeling of two-phase film boiling within porous corrosion deposits
Energy Technology Data Exchange (ETDEWEB)
Jin, Miaomiao, E-mail: mmjin@mit.edu; Short, Michael, E-mail: hereiam@mit.edu
2016-07-01
Porous corrosion deposits on nuclear fuel cladding, known as CRUD, can cause multiple operational problems in light water reactors (LWRs). CRUD can cause accelerated corrosion of the fuel cladding, increase radiation fields and hence greater exposure risk to plant workers once activated, and induce a downward axial power shift causing an imbalance in core power distribution. In order to facilitate a better understanding of CRUD's effects, such as localized high cladding surface temperatures related to accelerated corrosion rates, we describe an improved, fully-coupled, multiphysics model to simulate heat transfer, chemical reactions and transport, and two-phase fluid flow within these deposits. Our new model features a reformed assumption of 2D, two-phase film boiling within the CRUD, correcting earlier models' assumptions of single-phase coolant flow with wick boiling under high heat fluxes. This model helps to better explain observed experimental values of the effective CRUD thermal conductivity. Finally, we propose a more complete set of boiling regimes, or a more detailed mechanism, to explain recent CRUD deposition experiments by suggesting the new concept of double dryout specifically in thick porous media with boiling chimneys. - Highlights: • A two-phase model of CRUD's effects on fuel cladding is developed and improved. • This model eliminates the formerly erroneous assumption of wick boiling. • Higher fuel cladding temperatures are predicted when accounting for two-phase flow. • Double-peaks in thermal conductivity vs. heat flux in experiments are explained. • A “double dryout” mechanism in CRUD is proposed based on the model and experiments.
Two-Phase Immiscible Flows in Porous Media: The Mesocopic Maxwell–Stefan Approach
DEFF Research Database (Denmark)
Shapiro, Alexander
2015-01-01
We develop an approach to coupling between viscous flows of the two phases in porous media, based on the Maxwell–Stefan formalism. Two versions of the formalism are presented: the general form, and the form based on the interaction of the flowing phases with the interface between them. The last...... approach is supported by the description of the flow on the mesoscopic level, as coupled boundary problems for the Brinkmann or Stokes equations. It becomes possible, in some simplifying geometric assumptions, to derive exact expressions for the phenomenological coefficients in the Maxwell–Stefan transport...
Numerical simulation for a two-phase porous medium flow problem with rate independent hysteresis
Brokate, M.
2012-05-01
The paper is devoted to the numerical simulation of a multiphase flow in porous medium with a hysteretic relation between the capillary pressures and the saturations of the phases. The flow model we use is based on Darcys law. The hysteretic relation between the capillary pressures and the saturations is described by a play-type hysteresis operator. We propose a numerical algorithm for treating the arising system of equations, discuss finite element schemes and present simulation results for the case of two phases. © 2011 Elsevier B.V. All rights reserved.
On the upstream mobility scheme for two-phase flow in porous media
Mishra, Siddhartha
2009-01-01
When neglecting capillarity, two-phase incompressible flow in porous media is modelled as a scalar nonlinear hyperbolic conservation law. A change in the rock type results in a change of the flux function. Discretizing in one-dimensional with a finite volume method, we investigate two numerical fluxes, an extension of the Godunov flux and the upstream mobility flux, the latter being widely used in hydrogeology and petroleum engineering. Then, in the case of a changing rock type, one can give examples when the upstream mobility flux does not give the right answer.
A new set of equations describing immiscible two-phase flow in homogeneous porous media
Hansen, Alex; Bedeaux, Dick; Kjelstrup, Signe; Savani, Isha; Vassvik, Morten
2016-01-01
Based on a simple scaling assumption concerning the total flow rate of immiscible two-phase flow in a homogeneous porous medium under steady-state conditions and a constant pressure drop, we derive two new equations that relate the total flow rate to the flow rates of each immiscible fluid. By integrating these equations, we present two integrals giving the flow rate of each fluid in terms of the the total flow rate. If we in addition assume that the flow obeys the relative permeability (generalized Darcy) equations, we find direct expressions for the two relative permeabilities and the capillary pressure in terms of the total flow rate. Hence, only the total flow rate as a function of saturation at constant pressure drop across the porous medium needs to be measured in order to obtain all three quantities. We test the equations on numerical and experimental systems.
A phenomenological two-phase constitutive model for porous shape memory alloys
El Sayed, Tamer S.
2012-07-01
We present a two-phase constitutive model for pseudoelastoplastic behavior of porous shape memory alloys (SMAs). The model consists of a dense SMA phase and a porous plasticity phase. The overall response of the porous SMA is obtained by a weighted average of responses of individual phases. Based on the chosen constitutive model parameters, the model incorporates the pseudoelastic and pseudoplastic behavior simultaneously (commonly reported for porous SMAs) as well as sequentially (i.e. dense SMAs; pseudoelastic deformation followed by the pseudoplastic deformation until failure). The presented model also incorporates failure due to the deviatoric (shear band formation) and volumetric (void growth and coalescence) plastic deformation. The model is calibrated by representative volume elements (RVEs) with different sizes of spherical voids that are solved by unit cell finite element calculations. The overall response of the model is tested against experimental results from literature. Finally, application of the presented constitutive model has been presented by performing finite element simulations of the deformation and failure in unaixial dog-bone shaped specimen and compact tension (CT) test specimen. Results show a good agreement with the experimental data reported in the literature. © 2012 Elsevier B.V. All rights reserved.
Multiphysics modeling of two-phase film boiling within porous corrosion deposits
Jin, Miaomiao; Short, Michael
2016-07-01
Porous corrosion deposits on nuclear fuel cladding, known as CRUD, can cause multiple operational problems in light water reactors (LWRs). CRUD can cause accelerated corrosion of the fuel cladding, increase radiation fields and hence greater exposure risk to plant workers once activated, and induce a downward axial power shift causing an imbalance in core power distribution. In order to facilitate a better understanding of CRUD's effects, such as localized high cladding surface temperatures related to accelerated corrosion rates, we describe an improved, fully-coupled, multiphysics model to simulate heat transfer, chemical reactions and transport, and two-phase fluid flow within these deposits. Our new model features a reformed assumption of 2D, two-phase film boiling within the CRUD, correcting earlier models' assumptions of single-phase coolant flow with wick boiling under high heat fluxes. This model helps to better explain observed experimental values of the effective CRUD thermal conductivity. Finally, we propose a more complete set of boiling regimes, or a more detailed mechanism, to explain recent CRUD deposition experiments by suggesting the new concept of double dryout specifically in thick porous media with boiling chimneys.
Mechanics of the Separating Surface for a Two-Phase Co-current Flow in a Porous Medium
DEFF Research Database (Denmark)
Shapiro, Alexander A.
2016-01-01
A mechanical description of an unsteady two-phase co-current flow in a porous medium is developed based on the analysis of the geometry and motion of the surface separating the two phases. It is demonstrated that the flow should be considered as essentially three-dimensional, even if the phase ve...
Exact Jacobians in an implicit Newton method for two-phase flow in porous media
Büsing, H.; Clauser, C.
2012-04-01
Geological storage of CO2 is one option for mitigating the effects of CO2 emissions on global warming. Since extensive on-site monitoring of the CO2 plume propagation is expensive, numerical simulations are an attractive alternative for gaining deeper insight in the dynamics of this system. We consider a model for two-phase flow in porous media for representing the injection stage of a CO2 sequestration scenario, when the plume propagation is dominated by advection. The porous medium filled by the two phases CO2 and brine is modelled as an initial-boundary-value problem consisting of two nonlinear, coupled partial differential equations, which are complemented by appropriate boundary and initial conditions. We present a new numerical approach to solve this fully coupled system using exact Jacobians. The method is based on the finite element, finite volume, box method [Huber & Helmig(2000)] for the space discretization and, since stability of the method is one of the main concerns, the fully implicit Euler method for the time discretization. A simple first order upwind method takes into account advective contributions. The resulting system of nonlinear algebraic equations is linearized by Newton's method. The required Jacobians can be obtained elegantly by automatic differentiation (AD) [Griewank & Walther(2008), Rall(1981)], a source code transformation giving exact derivatives of the discretized equations with respect to primary variables. The resulting system of linear equations is then solved by an iterative method (BiCGStab) with ILU0 preconditioning in every Newton step. We compare the forward AD differentiation mode to the standard finite difference method in terms of precision and performance. It turns out that AD performs favourable in both aspects. We also illustrate the advantages of exact Jacobians for two-phase flow in a sequestration scenario investigating the evolution of pressure and saturation.
The solidification of two-phase heterogeneous materials:Theory versus experiment
Institute of Scientific and Technical Information of China (English)
KIM; Tongbeum
2009-01-01
The solidification behavior of two-phase heterogeneous materials such as close-celled aluminum foams was analytically studied.The proposed analytical model can precisely predict the location of solidification front as well as the full solidification time for a two-phase heterogeneous material composed of aluminum melt and non-conducting air pores.Experiments using distilled water simulating the aluminum melt to be solidified(frozen)were subsequently conducted to validate the analytical model for two selected porosities(ε),ε=0 and 0.5.Full numerical simulations with the method of finite difference were also performed to examine the influence of pore shape on solidification.The remarkable agreement between theory and experiment suggests that the delay of solidification in the two-phase heterogeneous material is mainly caused by the reduction of bulk thermal conductivity due to the presence of pores,as this is the sole mechanism accounted for by the analytical model for solidification in a porous medium.
A numerical study of steady-state two-phase flow in porous media
Energy Technology Data Exchange (ETDEWEB)
Knudsen, Henning Arendt
2002-07-01
Two-phase flow in porous media means the simultaneous flow of two phases, say two liquids, e.g., oil and water. This flow is restrained to be within a porous medium. For example sandstone and limestone are typical porous stones that can contain oil and gas in nature. In the extraction of oil from reservoirs, oil is usually displaced by water. So on a large scale we can consider it to be a displacement process. However, on pore scale the ''mix'' and flow processes are complicated. Idealistically, one might consider the search for truth a sufficient motivation for work in this field. Nevertheless, from an economic and technological point of view, enhanced oil recovery is the main motivation for the study of two-phase flow in porous media. Luckily, there are additional systems in real world that falls into this category. One such system is the flow of water and pollutants in aquifers. General knowledge in the field might be beneficial for preserving ground water reserves in the future. In the laboratory one often encounters artificially made porous media. For example glass beads between two glass plates. Therein, one of the phases flowing may be a mixture of glycerol and water. The other phase can be air which then is the non-wetting phase; air does not wet glass. It can also be silicone oil, and in that case the water/glycerol is normally the nonwetting phase. There are other possibilities. In general, laboratory studies are performed on systems on pore scale. The flow properties on the various length scales found in flow systems in nature depend on these properties on pore scale. The so-called upscaling problem concerns how to relate pore scale properties with properties on larger scales. The scope of this thesis is the study of properties on pore scale. The upscaling problem, which is a large research field in itself, is thus outside the scope of this thesis. The results of Paper 3 is an exception since they may infer also to larger scales than
A numerical method for a model of two-phase flow in a coupled free flow and porous media system
Chen, Jie
2014-07-01
In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.
Single- and two-phase flow in microfluidic porous media analogs based on Voronoi tessellation
Energy Technology Data Exchange (ETDEWEB)
Wu, Mengjie [Colorado School of Mines, Golden; Xiao, Feng [Colorado School of Mines, Golden; Johnson-Paben, Rebecca [Colorado School of Mines, Golden; Retterer, Scott T [ORNL; Yin, Xiaolong [Colorado School of Mines, Golden; Neeves, Keith B [ORNL
2012-01-01
The objective of this study was to create a microfluidic model of complex porous media for studying single and multiphase flows. Most experimental porous media models consist of periodic geometries that lend themselves to comparison with well-developed theoretical predictions. However, most real porous media such as geological formations and biological tissues contain a degree of randomness and complexity that is not adequately represented in periodic geometries. To design an experimental tool to study these complex geometries, we created microfluidic models of random homogeneous and heterogeneous networks based on Voronoi tessellations. These networks consisted of approximately 600 grains separated by a highly connected network of channels with an overall porosity of 0.11 0.20. We found that introducing heterogeneities in the form of large cavities within the network changed the permeability in a way that cannot be predicted by the classical porosity-permeability relationship known as the Kozeny equation. The values of permeability found in experiments were in excellent agreement with those calculated from three-dimensional lattice Boltzmann simulations. In two-phase flow experiments of oil displacement with water we found that the surface energy of channel walls determined the pattern of water invasion, while the network topology determined the residual oil saturation. These results suggest that complex network topologies lead to fluid flow behavior that is difficult to predict based solely on porosity. The microfluidic models developed in this study using a novel geometry generation algorithm based on Voronoi tessellation are a new experimental tool for studying fluid and solute transport problems within complex porous media.
Energy Technology Data Exchange (ETDEWEB)
Chen, Jixin [Mechanical and Aerospace Engineering, University of California, Irvine, Irvine, CA 92697-3975 (United States)
2010-02-15
In this study, the air-water two phase flow behavior in PEM fuel cell parallel channels with porous media inserts was experimentally investigated using a self-designed and manufactured transparent assembly. The visualization images of the two phase flow in channels with porous media inserts were presented and three patterns were summarized. Compared with the traditional hollow channel design, the novel configuration featured less severe two phase flow mal-distribution and self-adjustment to water amount in channels, although a higher pressure drop was introduced due to the porous media inserts. The dominant frequency of pressure drop signal was found to be a diagnostic tool for water behavior in channels. The novel flow channel design with porous media inserts may become a solution to the water management problem in PEM fuel cells. (author)
Chen, Jixin
In this study, the air-water two phase flow behavior in PEM fuel cell parallel channels with porous media inserts was experimentally investigated using a self-designed and manufactured transparent assembly. The visualization images of the two phase flow in channels with porous media inserts were presented and three patterns were summarized. Compared with the traditional hollow channel design, the novel configuration featured less severe two phase flow mal-distribution and self-adjustment to water amount in channels, although a higher pressure drop was introduced due to the porous media inserts. The dominant frequency of pressure drop signal was found to be a diagnostic tool for water behavior in channels. The novel flow channel design with porous media inserts may become a solution to the water management problem in PEM fuel cells.
Study on Two-Phase Flow in Heterogeneous Porous Media by Light Transmission Method
Qiao, W.
2015-12-01
The non-aqueous phase liquid (NAPL) released to the subsurface can form residual ganglia and globules occupying pores and also accumulate and form pools, in which multiphase system forms. Determining transient fluid saturations in a multiphase system is essential to understand the flow characteristics of systems and to perform effective remediation strategies. As a non-destructive and non-invasive laboratory technique utilized for the measurement of liquid saturation in porous media, light transmission is of the lowest cost and safe. Utilization of Coupled Charge Device camera in light transmission systems provides a nearly instantaneous high-density array of spatial measurements over a very large dynamic range. The migration of NAPL and air spariging technique applied to remove NAPL in aquifer systems are typically two-phase flow problem. Because of the natural aquifer normally being heterogeneous, two 2-D sandboxes (Length55cm×width1.3cm×hight45cm) are set up to study the migration of gas and DNAPL in heterogeneous porous media based on light transmission method and its application in two-phase flow. Model D for water/gas system developed by Niemet and Selker (2001) and Model NW-A for water/NAPL system developed by Zhang et al. (2014) are applied for the calculation of fluid saturation in the two experiments, respectively. The gas injection experiments show that the gas moves upward in the irregular channels, piling up beneath the low permeability lenses and starting lateral movement. Bypassing the lenses, the gas moves upward and forms continuous distribution in the top of the sandbox. The faster of gas injects, the wider of gas migration will be. The DNAPL infiltration experiment shows that TCE mainly moves downward as the influence of gravity, stopping vertical infiltration when reaching the low permeability lenses because of its failure to overcome the capillary pressure. Then, TCE accumulates on the surface and starts transverse movement. Bypassing the
An Iterative Implicit Scheme for Nanoparticles Transport with Two-Phase Flow in Porous Media
El-Amin, Mohamed
2016-06-01
In this paper, we introduce a mathematical model to describe the nanoparticles transport carried by a two-phase flow in a porous medium including gravity, capillary forces and Brownian diffusion. Nonlinear iterative IMPES scheme is used to solve the flow equation, and saturation and pressure are calculated at the current iteration step and then the transport equation is solved implicitly. Therefore, once the nanoparticles concentration is computed, the two equations of volume of the nanoparticles available on the pore surfaces and the volume of the nanoparticles entrapped in pore throats are solved implicitly. The porosity and the permeability variations are updated at each time step after each iteration loop. Numerical example for regular heterogenous permeability is considered. We monitor the changing of the fluid and solid properties due to adding the nanoparticles. Variation of water saturation, water pressure, nanoparticles concentration and porosity are presented graphically.
Numerical Treatment of Two-phase Flow in Porous Media Including Specific Interfacial Area
El-Amin, Mohamed
2015-06-01
In this work, we present a numerical treatment for the model of two-phase flow in porous media including specific interfacial area. For numerical discretization we use the cell-centered finite difference (CCFD) method based on the shifting-matrices method which can reduce the time-consuming operations. A new iterative implicit algorithm has been developed to solve the problem under consideration. All advection and advection-like terms that appear in saturation equation and interfacial area equation are treated using upwind schemes. Selected simulation results such as pc–Sw–awn surface, capillary pressure, saturation and specific interfacial area with various values of model parameters have been introduced. The simulation results show a good agreement with those in the literature using either pore network modeling or Darcy scale modeling.
A complete two-phase model of a porous cathode of a PEM fuel cell
Hwang, J. J.
This paper has developed a complete two-phase model of a proton exchange membrane (PEM) fuel cell by considering fluid flow, heat transfer and current simultaneously. In fluid flow, two momentum equations governing separately the gaseous-mixture velocity (u g) and the liquid-water velocity (u w) illustrate the behaviors of the two-phase flow in a porous electrode. Correlations for the capillary pressure and the saturation level connect the above two-fluid transports. In heat transfer, a local thermal non-equilibrium (LTNE) model accounting for intrinsic heat transfer between the reactant fluids and the solid matrices depicts the interactions between the reactant-fluid temperature (T f) and the solid-matrix temperature (T s). The irreversibility heating due to electrochemical reactions, Joule heating arising from Ohmic resistance, and latent heat of water condensation/evaporation are considered in the present non-isothermal model. In current, Ohm's law is applied to yield the conservations in ionic current (i m) and electronic current (i s) in the catalyst layer. The Butler-Volmer correlation describes the relation of the potential difference (overpotential) and the transfer current between the electrolyte (such as Nafion™) and the catalyst (such as Pt/C).
Non-equilibrium model of two-phase porous media flow with phase change
Cueto-Felgueroso, L.; Fu, X.; Juanes, R.
2014-12-01
The efficient simulation of multi-phase multi-component flow through geologic porous media is challenging and computationally intensive, yet quantitative modeling of these processes is essential in engineering and the geosciences. Multiphase flow with phase change and complex phase behavior arises in numerous applications, including enhanced oil recovery, steam injection in groundwater remediation, geologic CO2 storage and enhanced geothermal energy systems. A challenge of multiphase compositional simulation is that the number of existing phases varies with position and time, and thus the number of state variables in the saturation-based conservation laws is a function of space and time. The tasks of phase-state identification and determination of the composition of the different phases are performed assuming local thermodynamic equilibrium. Here we investigate a thermodynamically consistent formulation for non-isothermal two-phase flow, in systems where the hypothesis of instantaneous local equilibrium does not hold. Non-equilibrium effects are important in coarse-scale simulations where the assumption of complete mixing in each gridblock is not realistic. We apply our model to steam injection in water-saturated porous media.
Numerical modelling of two phase flow with hysteresis in heterogeneous porous media
Energy Technology Data Exchange (ETDEWEB)
Abreu, E. [Instituto Nacional de Matematica Pura e Aplicada (IMPA), Rio de Janeiro, RJ (Brazil); Furtado, F.; Pereira, F. [University of Wyoming, Laramie, WY (United States). Dept. of Mathematicsatics; Souza, G. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)
2008-07-01
Numerical simulators are necessary for the understanding of multiphase flow in porous media in order to optimize hydrocarbon recovery. In this work, the immiscible flow of two incompressible phases, a problem very common in waterflooding of petroleum reservoirs, is considered and numerical simulation techniques are presented. The system of equations which describe this type of flow form a coupled, highly nonlinear system of time-dependent partial differential equations (PDEs). The equation for the saturation of the invading fluid is a convection-dominated, degenerate parabolic PDE whose solutions typically exhibit sharp fronts (i.e., internal layers with strong gradients) and is very difficult to approximate numerically. It is well known that accurate modeling of convective and diffusive processes is one of the most daunting tasks in the numerical approximation of PDEs. Particularly difficult is the case where convection dominates diffusion. Specifically, we consider the injection problem for a model of two-phase (water/oil) flow in a core sample of porous rock, taking into account hysteresis effects in the relative permeability of the oil phase. (author)
Numerical and dimensional investigation of two-phase countercurrent imbibition in porous media
El-Amin, Mohamed
2013-04-01
In this paper, we introduce a numerical solution of the problem of two-phase immiscible flow in porous media. In the first part of this work, we present the general conservation laws for multiphase flows in porous media as outlined in the literature for the sake of completion where we emphasize the difficulties associated with these equations in their primitive form and the fact that they are, generally, unclosed. The second part concerns the 1D computation for dimensional and non-dimensional cases and a theoretical analysis of the problem under consideration. A time-scale based on the characteristic velocity is used to transform the macroscopic governing equations into a non-dimensional form. The resulting dimensionless governing equations involved some important dimensionless physical parameters such as Bond number Bo, capillary number Ca and Darcy number Da. Numerical experiments on the Bond number effect is performed for two cases, gravity opposing and assisting. The theoretical analysis illustrates that common formulations of the time-scale forces the coefficient Da12Ca to be equal to one, while formulation of dimensionless time based on a characteristic velocity allows the capillary and Darcy numbers to appear in the dimensionless governing equation which leads to a wide range of scales and physical properties of fluids and rocks. The results indicate that the buoyancy effects due to gravity force take place depending on the location of the open boundary. © 2012 Elsevier B.V. All rights reserved.
Effect of large-scale parameters for two-phase flow in heterogeneous porous media
Energy Technology Data Exchange (ETDEWEB)
Girgrah, B.
1994-01-01
Important problems in environmental protection and resource management require quantification of parameters at field (large) scale. A numerical model is utilized to construct large-scale capillary pressure (CP) and relative permeability (RP) curves for two-phase flow in heterogeneous porous media. Two-phase flow simulations were performed over a two-dimensional, numerically generated, heterogeneous permeability field. CP and RP curves were constructed for each simulation. The fields ranged in size from 1.25x1.25 m to 5x10 m and had a mean overall log-hydraulic conductivity of [minus]4.6. Flow was vertically downward with the left and right boundaries of the domain remaining impermeable. Following the simulations on heterogeneous fields, homogeneous equivalents were determined and run for sample simulations. The heterogeneous simulations included investigations into the representative elementary volume (REV) for two permeability fields, the effects of fluid properties on CP and RP, and the effects of correlation structure. The equivalent homogeneous simulations explored the feasibility of homogeneous solutions to predict heterogeneous behavior. Results showed that the REVs for fields one and two were a domain size of 50x50 nodes. Fluid property investigations showed that CP decreased when interfacial tension decreased. Structural explorations showed vertical bedding caused an increase in both CP and RP results. A decrease in log-hydraulic conductivity variance caused slight increases in RP and CP. No direct correlation was obtained between homogeneous and heterogeneous flow behavior. A modification could be made to the homogeneous model to allow it to accurately predict heterogeneous flow. 49 refs., 28 figs., 10 tabs.
Adaptive Multi-Scale Pore Network Method for Two-Phase Flow in Porous Media
Meyer, D. W.; Khayrat, K.; Jenny, P.
2015-12-01
Dynamic pore network simulators are important tools in studying macroscopic quantities in two-phase flow through porous media. However, these simulators have a time complexity of order N2 for N pore bodies, which limits their usage to small domains. Quasi-static pore network simulators, which assume capillary dominated flow, are more efficient with a time complexity of order N log(N), but are unable to capture phenomena caused by viscous effects such as viscous fingering and stable displacement. It has been experimentally observed that, in several flow scenarios, capillary forces are dominant at the pore scale and viscous forces at larger scales. In order to take advantage of this behaviour and to reduce the time complexity of existing dynamic pore network simulators, we propose a multi-scale pore-network method for two phase flow. In our solution algorithm, the pore network is first divided into smaller subnetworks. The algorithm to advance the fluid interfaces within each subnetwork consists of three steps: 1) The saturation rate of each subnetwork is obtained by solving a two-phase meso-scale mass balance equation over the domain of subnetworks. Here, a multi-point flux scheme is used. 2) Depending on the local capillary number computed in the subnetwork, either an invasion percolation algorithm or a dynamic network algorithm is used to locally advance the fluid-fluid interfaces within each subnetwork until a new saturation value is matched. 3) The transmissibilities for the meso-scale equation are updated based on the updated fluid configurations in each subnetwork. For this purpose the methodoloy of the existing multi-scale finite volume (MSFV) method is employed. An important feature of the multi-scale pore-network method is that it maintains consistency of both fluid occupancy and fluxes at subnetwork interfaces. Viscous effects such as viscous fingering (see figure) can be captured at a decreased computational cost compared to dynamic pore network
Non-isothermal two-phase flow in low-permeable porous media
Kolditz, O.; De Jonge, J.
In this paper, we consider non-isothermal two-phase flow of two components (air and water) in gaseous and liquid phases in extremely low-permeable porous media through the use of the finite element method (FEM). Interphase mass transfer of the components between any of the phases is evaluated by assuming local thermodynamic equilibrium between the phases. Heat transfer occurs by conduction and multiphase advection. General equations of state for phase changes (Clausius-Clapeyron and Henry law) as well as multiphase properties for the low-permeable bentonites are implemented in the code. Additionally we consider the impact of swelling/shrinking processes on porosity and permeability changes. The numerical model is implemented in the context of the simulator RockFlow/RockMech (RF/RM), which is based on object-oriented programming techniques. The finite element formulations are written in terms of dimensionless quantities. This has proved to be advantageous for preconditioning composite system matrices of coupled multi-field problems. Three application examples are presented. The first one examines differences between the Richards' approximation and the multicomponent/multiphase approach, and between two numerical coupling schemes. The second example serves as partial verification against experimental results and to demonstrate coherence between different element types. The last example shows simultaneous desaturation and resaturation in one system.
An implicit numerical model for multicomponent compressible two-phase flow in porous media
Zidane, Ali; Firoozabadi, Abbas
2015-11-01
We introduce a new implicit approach to model multicomponent compressible two-phase flow in porous media with species transfer between the phases. In the implicit discretization of the species transport equation in our formulation we calculate for the first time the derivative of the molar concentration of component i in phase α (cα, i) with respect to the total molar concentration (ci) under the conditions of a constant volume V and temperature T. The species transport equation is discretized by the finite volume (FV) method. The fluxes are calculated based on powerful features of the mixed finite element (MFE) method which provides the pressure at grid-cell interfaces in addition to the pressure at the grid-cell center. The efficiency of the proposed model is demonstrated by comparing our results with three existing implicit compositional models. Our algorithm has low numerical dispersion despite the fact it is based on first-order space discretization. The proposed algorithm is very robust.
Numerical and dimensional analysis of nanoparticles transport with two-phase flow in porous media
El-Amin, Mohamed
2015-04-01
In this paper, a mathematical model and numerical simulation are developed to describe the imbibition of nanoparticles-water suspension into two-phase flow in a porous medium. The flow system may be changed from oil-wet to water-wet due to nanoparticles (which are also water-wet) deposition on surface of the pores. So, the model is extended to include the negative capillary pressure and mixed-wet relative permeability correlations to fit with the mixed-wet system. Moreover, buoyancy and capillary forces as well as Brownian diffusion and mechanical dispersion are considered in the mathematical model. An example of countercurrent imbibition in a core of small scale is considered. A dimensional analysis of the governing equations is introduced to examine contributions of each term of the model. Several important dimensionless numbers appear in the dimensionless equations, such as Darcy number Da, capillary number Ca, and Bond number Bo. Throughout this investigation, we monitor the changing of the fluids and solid properties due to addition of the nanoparticles using numerical experiments.
Application of the CE/SE Method to a Two-Phase Detonation Model in Porous Media
Institute of Scientific and Technical Information of China (English)
DONG He-Fei; HONG Tao; ZHANG De-Liang
2011-01-01
We extend the conservation-element and solution-element method to simulate a two-phase detonation model in porous media. The accuracy of the method is validated by calculating an inert compaction problem. The main characteristics of piston-driven detonation phenomena, including the compaction wave, the onset of combustion,and the transition to detonation, could be predicted successfully.
Zhang, Kai
Bioactive materials chemically bond to tissues through the development of biologically active apatite. Porous structures in biomaterials are designed to enhance bioactivity, grow artificial tissues and achieve better integration with host tissues in the body. The goal of this research is to design, fabricate and characterize novel porous bioactive materials. 3D ordered macroporous bioactive glasses (3DOM-BGs, pore size: 200--1000 nm) were prepared using a sol-gel process and colloidal crystal templates. 3DOM-BGs are more bioactive and degradable than mesoporous (pore size simulated body fluid (SBF). Apatite formation and 3DOM-BG degradation rates increased with the decrease of soaking ratio. Apatite induction time in SBF increased with 3DOM-BG calcination temperature (600--800°C). Apatite formation and 3DOMBG degradation were slightly enhanced for a phosphate containing composition. Large 3DOM-BG particles formed less apatite and degraded less completely as compared with small particles. An increase in macropore size slowed down 3DOM-BG degradation and apatite formation processes. After heating the converted apatite at a temperature higher than 700°C, highly crystalline hydroxyapatite and a minor tri-calcium phosphate phase formed. 3DOM-BGs have potential applications as bone/periodontal fillers, and drugs and biological factors delivery agents. Anchoring artificial soft tissues (e.g., cartilage) to native bone presents a challenge. Porous polymer/bioactive glass composites are candidate materials for engineering artificial soft tissue/bone interfaces. Porous composites consisting of polymer matrices (e.g., polysulfone, polylactide, and polyurethane) and bioactive glass particles were prepared by polymer phase separation techniques adapted to include ceramic particles. Composites (thickness: 200--500 mum) have asymmetric structures with dense top layers and porous structures beneath. Porous structures consist of large pores (>100 mum) in a network of smaller (<10
Porous Thermoelectric Materials
Directory of Open Access Journals (Sweden)
Hiroshi Julian Goldsmid
2009-08-01
Full Text Available Thermoelectric materials are sometimes prepared using a sintering process in which the achievement of a high density is often one of the objectives. However, it has recently been shown that the introduction of a highly porous material is desirable in synthetic transverse thermoelements. Porosity may also be an advantage in conventional longitudinal thermoelectric modules in which a high thermal flux density creates problems, but heat transfer within the pores can degrade the thermoelectric figure of merit. The amount of this degradation is calculated and it is shown that it can be small enough to be acceptable in practical devices.
Hybrid Upwinding for Two-Phase Flow in Heterogeneous Porous Media with Buoyancy and Capillarity
Hamon, F. P.; Mallison, B.; Tchelepi, H.
2016-12-01
In subsurface flow simulation, efficient discretization schemes for the partial differential equations governing multiphase flow and transport are critical. For highly heterogeneous porous media, the temporal discretization of choice is often the unconditionally stable fully implicit (backward-Euler) method. In this scheme, the simultaneous update of all the degrees of freedom requires solving large algebraic nonlinear systems at each time step using Newton's method. This is computationally expensive, especially in the presence of strong capillary effects driven by abrupt changes in porosity and permeability between different rock types. Therefore, discretization schemes that reduce the simulation cost by improving the nonlinear convergence rate are highly desirable. To speed up nonlinear convergence, we present an efficient fully implicit finite-volume scheme for immiscible two-phase flow in the presence of strong capillary forces. In this scheme, the discrete viscous, buoyancy, and capillary spatial terms are evaluated separately based on physical considerations. We build on previous work on Implicit Hybrid Upwinding (IHU) by using the upstream saturations with respect to the total velocity to compute the relative permeabilities in the viscous term, and by determining the directionality of the buoyancy term based on the phase density differences. The capillary numerical flux is decomposed into a rock- and geometry-dependent transmissibility factor, a nonlinear capillary diffusion coefficient, and an approximation of the saturation gradient. Combining the viscous, buoyancy, and capillary terms, we obtain a numerical flux that is consistent, bounded, differentiable, and monotone for homogeneous one-dimensional flow. The proposed scheme also accounts for spatially discontinuous capillary pressure functions. Specifically, at the interface between two rock types, the numerical scheme accurately honors the entry pressure condition by solving a local nonlinear problem
Two-Phase Flow in Porous Media: Predicting Its Dependence on Capillary Number and Viscosity Ratio
Energy Technology Data Exchange (ETDEWEB)
Ferer, M. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); West Virginia Univ., Morgantown, WV (United States); Anna, Shelley L. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Carnegie Mellon Univ., Pittsburgh, PA (United States); Tortora, Paul [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Carnegie Mellon Univ., Pittsburgh, PA (United States); Kadambi, J. R. [Case Western Reserve Univ., Cleveland, OH (United States); Oliver, M. [Case Western Reserve Univ., Cleveland, OH (United States); Bromhal, Grant S. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Smith, Duane H. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); West Virginia Univ., Morgantown, WV (United States)
2011-01-01
Motivated by the need to determine the dependencies of two-phase flow in a wide range of applications from carbon dioxide sequestration to enhanced oil recovery, we have developed a standard two-dimensional, pore-level model of immiscible drainage, incorporating viscous and capillary effects. This model has been validated through comparison with several experiments. For a range of stable viscosity ratios (M=μ_{injected,nwf}/μ_{defending,wf} ≥ 1), we had increased the capillary number, N_{c} and studied the way in which the flows deviate from fractal capillary fingering at a characteristic time and become compact for realistic capillary numbers. This crossover has enabled predictions for the dependence of the flow behavior upon capillary number and viscosity ratio. Our results for the crossover agreed with earlier theoretical predictions, including the universality of the leading power-law indicating its independence of details of the porous medium structure. In this article, we have observed a similar crossover from initial fractal viscous fingering (FVF) to compact flow, for large capillary numbers and unstable viscosity ratios M < 1. In this case, we increased the viscosity ratio from infinitesimal values, and studied the way in which the flows deviate from FVF at a characteristic time and become compact for non-zero viscosity ratios. This crossover has been studied using both our pore-level model and micro-fluidic flow-cell experiments. The same characteristic time, τ = 1/M^{0.7}, satisfactorily describes both the pore-level results.
Optimized manufacturable porous materials
DEFF Research Database (Denmark)
Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard
Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...
Hybrid finite volume scheme for a two-phase flow in heterogeneous porous media*
Directory of Open Access Journals (Sweden)
Brenner Konstantin
2012-04-01
Full Text Available We propose a finite volume method on general meshes for the numerical simulation of an incompressible and immiscible two-phase flow in porous media. We consider the case that can be written as a coupled system involving a degenerate parabolic convection-diffusion equation for the saturation together with a uniformly elliptic equation for the global pressure. The numerical scheme, which is implicit in time, allows computations in the case of a heterogeneous and anisotropic permeability tensor. The convective fluxes, which are non monotone with respect to the unknown saturation and discontinuous with respect to the space variables, are discretized by means of a special Godunov scheme. We prove the existence of a discrete solution which converges, along a subsequence, to a solution of the continuous problem. We present a number of numerical results in space dimension two, which confirm the efficiency of the numerical method. Nous proposons un schéma de volumes finis hybrides pour la discrétisation d’un problème d’écoulement diphasique incompressible et immiscible en milieu poreux. On suppose que ce problème a la forme d’une équation parabolique dégénérée de convection-diffusion en saturation couplée à une équation uniformément elliptique en pression. On considère un schéma implicite en temps, où les flux diffusifs sont discrétisés par la méthode des volumes finis hybride, ce qui permet de pouvoir traiter le cas d’un tenseur de perméabilité anisotrope et hétérogène sur un maillage très général, et l’on s’appuie sur un schéma de Godunov pour la discrétisation des flux convectifs, qui peuvent être non monotones et discontinus par rapport aux variables spatiales. On démontre l’existence d’une solution discrète, dont une sous-suite converge vers une solution faible du problème continu. On présente finalement des cas test bidimensionnels.
Experimental investigation on front morphology for two-phase flow in heterogeneous porous media
Heiß, V. I.; Neuweiler, I.; Ochs, S.; FäRber, A.
2011-10-01
In this work, we studied the influence of heterogeneities, fluid properties, and infiltration rates on front morphology during two-phase flow. In our experiments, a sand box, 40 cm × 60 cm × 1.2 cm, was packed with two different structures (either random or periodic) composed of 25% coarse material and 75% fine material. The infiltration process was characterized by the capillary number, Ca, and the viscosity ratio, M, between the fluids. The displacing and the displaced fluid had the same densities, such that gravity effects could be neglected. Similar to the pore scale, the stability of the front depends on the relation between M and Ca. However, on the scale under study, depending on the structure, zones of immobilized wetting fluid developed during drainage. The lifetime of these zones depended on the flow regime. Here we show that immobilized zones have an influence on the length of the transition zone, which could lead to a different time behavior than for that of the front width.
Energy Technology Data Exchange (ETDEWEB)
Doughty, C.; Pruess, K. [Lawrence Berkeley Lab., CA (United States)
1991-06-01
Over the past few years the authors have developed a semianalytical solution for transient two-phase water, air, and heat flow in a porous medium surrounding a constant-strength linear heat source, using a similarity variable {eta} = r/{radical}t. Although the similarity transformation approach requires a simplified geometry, all the complex physical mechanisms involved in coupled two-phase fluid and heat flow can be taken into account in a rigorous way, so that the solution may be applied to a variety of problems of current interest. The work was motivated by adverse to predict the thermohydrological response to the proposed geologic repository for heat-generating high-level nuclear wastes at Yucca Mountain, Nevada, in a partially saturated, highly fractured volcanic formation. The paper describes thermal and hydrologic conditions near the heat source; new features of the model; vapor pressure lowering; and the effective-continuum representation of a fractured/porous medium.
Kou, Jisheng
2013-06-20
We analyze a combined method consisting of the mixed finite element method for pressure equation and the discontinuous Galerkin method for saturation equation for the coupled system of incompressible two-phase flow in porous media. The existence and uniqueness of numerical solutions are established under proper conditions by using a constructive approach. Optimal error estimates in L2(H1) for saturation and in L∞(H(div)) for velocity are derived. Copyright © 2013 John Wiley & Sons, Ltd.
On the nonequilibrium segregation state of a two-phase mixture in a porous column
DEFF Research Database (Denmark)
Shapiro, Alexander; Stenby, Erling Halfdan
1996-01-01
The problem of segregation of a two-phase multicomponent mixture under the action of thermal gradient, gravity and capillary forces is studied with respect to component distribution in a thick oil-gas-condensate reservoir. Governing equations are derived on the basis of nonequilibrium thermodynam...... thermodynamics. A steady state of the two-phase mixture with nonzero diffusion fluxes and exchange between phases is described. In the case of binary mixtures analytical formulae for saturation, component distribution and flow in the two-phase zone are obtained....
Erpelding, Marion; Sinha, Santanu; Tallakstad, Ken Tore; Hansen, Alex; Flekkøy, Eirik Grude; Måløy, Knut Jørgen
2013-11-01
It is well known that the transient behavior during drainage or imbibition in multiphase flow in porous media strongly depends on the history and initial condition of the system. However, when the steady-state regime is reached and both drainage and imbibition take place at the pore level, the influence of the evolution history and initial preparation is an open question. Here, we present an extensive experimental and numerical work investigating the history dependence of simultaneous steady-state two-phase flow through porous media. Our experimental system consists of a Hele-Shaw cell filled with glass beads which we model numerically by a network of disordered pores transporting two immiscible fluids. From measurements of global pressure evolution, histograms of saturation, and cluster-size distributions, we find that when both phases are flowing through the porous medium, the steady state does not depend on the initial preparation of the system or on the way it has been reached.
Moisture Sorption in Porous Materials
DEFF Research Database (Denmark)
Nielsen, Lauge Fuglsang
2007-01-01
Abstract: Information on pore geometry is very important in any study of the mechanical and physical behavior of porous materials. Unfortunately pores are not very accessible for direct measurements. Indirect methods have to be used which involve impregnation (sorption) experiments from which...... in the subject considered this software is available on request to the author. Keywords: Porous materials, moisture, adsorption, desorption, BET-parameters....
Wang, W.; Zehner, B.; Böttcher, N.; Goerke, U.; Kolditz, O.
2013-12-01
Numerical modeling of the two-phase flow process in porous media for real applications, e.g. CO2 storage processes in saline aquifers, is computationally expensive due to the complexity and the non-linearity of the observed physical processes. In such modeling, a fine discretization of the considered domain is normally needed for a high degree of accuracy, and it leads to the requirement of extremely high computational resources. This work focuses on the parallel simulation of the two-phase flow process in porous media. The Galerkin finite element method is used to solve the governing equations. Based on the overlapping domain decomposition approach, the PETSc package is employed to parallelize the global equation assembly and the linear solver, respectively. A numerical model based on the real test site Ketzin in Germany is adopted for parallel computing. The model domain is discretized with more than four million tetrahedral elements. The parallel simulations are carried out on a Linux cluster with different number of cores. The obtained speedup shows a good scalability of the current parallel finite element approach of the two-phase flow modeling in geological CO2 storage applications.
Teng, Ying; Liu, Yu; Jiang, Lanlan; Song, Yongchen; Zhao, Jiafei; Zhang, Yi; Wang, Dayong
2016-09-01
Gravity drainage characteristics are important to improve our understanding of gas-liquid or liquid-liquid two-phase flow in porous media. Stable or unstable displacement fronts that controlled by the capillary force, viscous force, gravitational force, etc., are relevant features of immiscible two-phase flow. In this paper, three dimensionless parameters, namely, the gravity number, the capillary number and the Bond number, were used to describe the effect of the above mentioned forces on two-phase drainage features, including the displacement front and final displacing-phase saturation. A series of experiments on the downward displacement of a viscous fluid by a less viscous fluid in a vertical vessel that is filled with quartz beads are performed by using magnetic resonance imaging (MRI). The experimental results indicate that the wetting properties at both high and low capillary numbers exert remarkable control on the fluid displacement. When the contact angle is lower than 90°, i.e., the displaced phase is the wetting phase, the average velocity Vf of the interface of the two phases (displacement front velocity) is observably lower than when the displaced phase is the non-wetting phase (contact angle higher than 90°). The results show that a fingering phenomenon occurs when the gravity number G is less than the critical gravity number G'=Δμ/μg. Moreover, the higher Bond number results in higher final displacing-phase saturation, whereas the capillary number has an opposite effect.
Kou, Jisheng
2014-03-22
Discontinuous Galerkin methods with interior penalties and upwind schemes are applied to the original formulation modeling incompressible two-phase flow in porous media with the capillary pressure. The pressure equation is obtained by summing the discretized conservation equations of two phases. This treatment is very different from the conventional approaches, and its great merit is that the mass conservations hold for both phases instead of only one phase in the conventional schemes. By constructing a new continuous map and using the fixed-point theorem, we prove the global existence of discrete solutions under the proper conditions, and furthermore, we obtain a priori hp error estimates of the pressures in L 2 (H 1) and the saturations in L ∞(L 2) and L 2 (H 1). © 2014 Wiley Periodicals, Inc.
A splitting technique for analytical modelling of two-phase multicomponent flow in porous media
DEFF Research Database (Denmark)
Pires, A.P.; Bedrikovetsky, P.G.; Shapiro, Alexander
2006-01-01
In this paper we discuss one-dimensional models for two-phase Enhanced Oil Recovery (EOR) floods (oil displacement by gases, polymers, carbonized water, hot water, etc.). The main result presented here is the splitting of the EOR mathematical model into thermodynamical and hydrodynamical parts....... The introduction of a potential associated with one of the conservation laws and its use as a new independent coordinate reduces the number of equations by one. The (n)x(n) conservation law model for two-phase n-component EOR flows in new coordinates is transformed into a reduced (n-1)x(n-1) auxiliary system...... containing just thermodynamical variables (equilibrium fractions of components, sorption isotherms) and one lifting equation containing just hydrodynamical parameters (phase relative permeabilities and viscosities). The algorithm to solve analytically the problem includes solution of the reduced auxiliary...
El-Amin, Mohamed F.
2017-05-05
This paper is devoted to study the problem of nonisothermal two-phase flow with nanoparticles transport in heterogenous porous media, numerically. For this purpose, we introduce a multiscale adapted time-splitting technique to simulate the problem under consideration. The mathematical model consists of equations of pressure, saturation, heat, nanoparticles concentration in the water–phase, deposited nanoparticles concentration on the pore–walls, and entrapped nanoparticles concentration in the pore–throats. We propose a multiscale time splitting IMplicit Pressure Explicit Saturation–IMplicit Temperature Concentration (IMPES-IMTC) scheme to solve the system of governing equations. The time step-size adaptation is achieved by satisfying the stability Courant–Friedrichs–Lewy (CFL<1) condition. Moreover, numerical test of a highly heterogeneous porous medium is provided and the water saturation, the temperature, the nanoparticles concentration, the deposited nanoparticles concentration, and the permeability are presented in graphs.
Berejnov, Viatcheslav; Sinton, David; Djilali, Ned
2009-01-01
Experimental two-phase invasion percolation flow patterns were observed in hydrophobic micro-porous networks designed to model fuel cell specific porous media. In order to mimic the operational conditions encountered in the porous electrodes of polymer electrolyte membrane fuel cells (PEMFCs), micro-porous networks were fabricated with corresponding microchannel size distributions. The inlet channels were invaded homogeneously with flow rates corresponding to fuel cell current densities of 1.0 to 0.1 A/cm2 (Ca 10e-7-10e-8). A variety of fractal breakthrough patterns were observed and analyzed to quantify flooding density and geometrical diversity in terms of the total saturation, St, local saturations, s, and fractal dimension, D. It was found that St increases monotonically during the invasion process until the breakthrough point is reached, and s profiles indicate the dynamic distribution of the liquid phase during the process. Fractal analysis confirmed that the experiments fall within the flow regime of i...
A generalized power-law scaling law for a two-phase imbibition in a porous medium
El-Amin, Mohamed
2013-11-01
Dimensionless time is a universal parameter that may be used to predict real field behavior from scaled laboratory experiments in relation to imbibition processes in porous media. Researchers work to nondimensionalize the time has been through the use of parameters that are inherited to the properties of the moving fluids and the porous matrix, which may be applicable to spontaneous imbibition. However, in forced imbibition, the dynamics of the process depends, in addition, on injection velocity. Therefore, we propose the use of scaling velocity in the form of a combination of two velocities, the first of which (the characteristic velocity) is defined by the fluid and the porous medium parameters and the second is the injection velocity, which is a characteristic of the process. A power-law formula is suggested for the scaling velocity such that it may be used as a parameter to nondimensionalize time. This may reduce the complexities in characterizing two-phase imbibition through porous media and works well in both the cases of spontaneous and forced imbibition. The proposed scaling-law is tested against some oil recovery experimental data from the literature. In addition, the governing partial differential equations are nondimensionalized so that the governing dimensionless groups are manifested. An example of a one-dimensional countercurrent imbibition is considered numerically. The calculations are carried out for a wide range of Ca and Da to illustrate their influences on water saturation as well as relative water/oil permeabilities. © 2013 Elsevier B.V.
Diffusion in porous crystalline materials
Krishna, R.
2012-01-01
The design and development of many separation and catalytic process technologies require a proper quantitative description of diffusion of mixtures of guest molecules within porous crystalline materials. This tutorial review presents a unified, phenomenological description of diffusion inside meso-
Tecklenburg, Jan; Neuweiler, Insa; Carrera, Jesus; Dentz, Marco
2016-05-01
We study modeling of two-phase flow in highly heterogeneous fractured and porous media. The flow behaviour is strongly influenced by mass transfer between a highly permeable (mobile) fracture domain and less permeable (immobile) matrix blocks. We quantify the effective two-phase flow behavior using a multirate rate mass transfer (MRMT) approach. We discuss the range of applicability of the MRMT approach in terms of the pertinent viscous and capillary diffusion time scales. We scrutinize the linearization of capillary diffusion in the immobile regions, which allows for the formulation of MRMT in the form of a non-local single equation model. The global memory function, which encodes mass transfer between the mobile and the immobile regions, is at the center of this method. We propose two methods to estimate the global memory function for a fracture network with given fracture and matrix geometry. Both employ a scaling approach based on the known local memory function for a given immobile region. With the first method, the local memory function is calculated numerically, while the second one employs a parametric memory function in form of truncated power-law. The developed concepts are applied and tested for fracture networks of different complexity. We find that both physically based parameter estimation methods for the global memory function provide predictive MRMT approaches for the description of multiphase flow in highly heterogeneous porous media.
Two-phase flow in correlated pore-throat random porous media
Institute of Scientific and Technical Information of China (English)
田巨平; 姚凯伦
2002-01-01
We have constructed a porous media model in which there are percolation clusters with varying percolation probability P and correlated site-bonds. Taking into account both the pore and the throat geometry, the viscous fingering (VF) in porous media has been investigated by using the standard over-relaxed Gauss-Seidel scheme. The simulation results show that the VF structure varies with the correlation parameter ε, the viscosity ratio M and the percolation probability P. The smaller the correlation parameter ε, the greater thedeviation of the normalized size distribution of the invaded throat Ninv(r) from the truncated Rayleigh distribution.For a larger viscosity ratio M,the VF pattern looks like a diffusion-limited-aggregation structure in percolation clusters. The fractal dimension D increases with the increase of the percolation probability P and the correlation parameter e. The velocity distribution f(α) of VF in percolation clusters is of a parabola-like curve. The tail of the distribution (large α) is longer for a larger correlation parameter ε. For a smaller ε, the distribution is very sharp. The sweep efficiency E decreases along with the decrease of the correlation parameter ε and the increase of the network size Lnz. E has a minimum as Lnz increases up to the maximum no matter what the values of P, M and ε. The E ～ Lnz curve has a frozen zone and an active zone. The geometry and the topology of the porous media have strong effects on the displacement processes and the structure of VF.
On strength of porous material
DEFF Research Database (Denmark)
Nielsen, Lauge Fuglsang
1999-01-01
quality without damaging or destroying the material or the building component considered. The efficiency of MOE-MOR relations for this purpose depends very much on the homogeneity of porous material considered. For building materials like wood and concrete of normal or lower quality with a number......The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus OF Rupture) of materials have been established in order to control...... of irregularities only scattered MOE-MOR relations (clouds) can be established from which no really results can be read.For homogeneously produced porous materials, however, like modern ceramics and high performance concretes MOE-MOR relations can be presented which are reliable. The present paper contributes...
Acoustic Absorption in Porous Materials
Kuczmarski, Maria A.; Johnston, James C.
2011-01-01
An understanding of both the areas of materials science and acoustics is necessary to successfully develop materials for acoustic absorption applications. This paper presents the basic knowledge and approaches for determining the acoustic performance of porous materials in a manner that will help materials researchers new to this area gain the understanding and skills necessary to make meaningful contributions to this field of study. Beginning with the basics and making as few assumptions as possible, this paper reviews relevant topics in the acoustic performance of porous materials, which are often used to make acoustic bulk absorbers, moving from the physics of sound wave interactions with porous materials to measurement techniques for flow resistivity, characteristic impedance, and wavenumber.
Numerical study on turbulent two-phase flow in porous medium combustion chamber
Institute of Scientific and Technical Information of China (English)
无
2009-01-01
To understand the working mechanism of the porous medium(PM)internal combustion engine,effects of a porous medium heat regenerator inserted into a combustion chamber on the turbulent flow char-acteristics and fuel-air mixture formation are studied by numerical simulation.The cylindrical chamber has a constant volume,in which a disk-shaped PM insert is fixed.A simplified model for the random structure of the PM is presented,in which the PM is represented by an assembly of a great number of randomly distributed solid units.To simulate flows in the PM a microscopic approach is employed,in which computations are performed on a pore-scale mesh and based on the standard k-ε turbulence model.A spray model,in which the effects of drop breakup,collision and coalescence are taken into account,is introduced to describe spray/wall interactions.Numerical computations are performed for the turbulent flows induced by a fuel spray outside and inside of the PM with different structure parameters.Calculation results show that the spray/PM interaction has substantial and positive influ-ences on the fuel-air mixture formation and homogenization in the combustion chamber,which could be very advantageous in engine applications.
Yang, Haijian
2016-07-26
Fully implicit methods are drawing more attention in scientific and engineering applications due to the allowance of large time steps in extreme-scale simulations. When using a fully implicit method to solve two-phase flow problems in porous media, one major challenge is the solution of the resultant nonlinear system at each time step. To solve such nonlinear systems, traditional nonlinear iterative methods, such as the class of the Newton methods, often fail to achieve the desired convergent rate due to the high nonlinearity of the system and/or the violation of the boundedness requirement of the saturation. In the paper, we reformulate the two-phase model as a variational inequality that naturally ensures the physical feasibility of the saturation variable. The variational inequality is then solved by an active-set reduced-space method with a nonlinear elimination preconditioner to remove the high nonlinear components that often causes the failure of the nonlinear iteration for convergence. To validate the effectiveness of the proposed method, we compare it with the classical implicit pressure-explicit saturation method for two-phase flow problems with strong heterogeneity. The numerical results show that our nonlinear solver overcomes the often severe limits on the time step associated with existing methods, results in superior convergence performance, and achieves reduction in the total computing time by more than one order of magnitude.
Flux-dependent percolation transition in immiscible two-phase flows in porous media.
Ramstad, Thomas; Hansen, Alex; Oren, Pål-Eric
2009-03-01
Using numerical simulations, we study immiscible two-phase flow in a pore network reconstructed from Berea sandstone under flow conditions that are statistically invariant under translation. Under such conditions, the flow is a state function which is not dependent on initial conditions. We find a second-order phase transition resembling the phase inversion transition found in emulsions. The flow regimes under consideration are those of low surface tension-hence high capillary numbers Ca-where viscous forces dominate. Nevertheless, capillary forces are imminent, we observe a critical stage in saturation where the transition takes place. We determine polydispersity critical exponent tau=2.27+/-0.08 and find that the critical saturation depends on how fast the fluids flow.
Trost, Nico; Jiménez, Javier; Imke, Uwe; Sanchez, Victor
2014-06-01
TWOPORFLOW is a thermo-hydraulic code based on a porous media approach to simulate single- and two-phase flow including boiling. It is under development at the Institute for Neutron Physics and Reactor Technology (INR) at KIT. The code features a 3D transient solution of the mass, momentum and energy conservation equations for two inter-penetrating fluids with a semi-implicit continuous Eulerian type solver. The application domain of TWOPORFLOW includes the flow in standard porous media and in structured porous media such as micro-channels and cores of nuclear power plants. In the latter case, the fluid domain is coupled to a fuel rod model, describing the heat flow inside the solid structure. In this work, detailed profiling tools have been utilized to determine the optimization potential of TWOPORFLOW. As a result, bottle-necks were identified and reduced in the most feasible way, leading for instance to an optimization of the water-steam property computation. Furthermore, an OpenMP implementation addressing the routines in charge of inter-phase momentum-, energy- and mass-coupling delivered good performance together with a high scalability on shared memory architectures. In contrast to that, the approach for distributed memory systems was to solve sub-problems resulting by the decomposition of the initial Cartesian geometry. Thread communication for the sub-problem boundary updates was accomplished by the Message Passing Interface (MPI) standard.
Simulation of incompressible two-phase flow in porous media with large timesteps
Cogswell, Daniel A
2016-01-01
The equations for the flow of two immiscible, incompressible fluid phases in porous media are recast as a gradient flow using the phase-field method, and a convex energy splitting scheme is applied to enable unconditionally large timesteps. The model accurately reproduces the Buckley-Leverett solution and is robust with respect to high degrees of heterogeneity in permeability and viscosity. By using the phase-field formulation as a homotopy map, the underlying hyperbolic flow equations can be solved directly with large timesteps. For a heterogeneous test problem, the new formulation allows the timestep to be increased by more than four orders of magnitude relative to the traditional formulation while maintaining both stability and accuracy.
Coupled Hydromechanical Model of Two-Phase Fluid Flow in Deformable Porous Media
Directory of Open Access Journals (Sweden)
You-Seong Kim
2013-01-01
Full Text Available A model of solid-water-air coupling in triphasic mixtures is compared with solid-water coupling in biphasic mixtures with an application to partially saturated porous media. Based on thermodynamics, the mathematical framework governing the behavior of a partially saturated soil is derived using balance equations, and the numerical implementation and drainage tests of a soil column are carried out to validate the obtained formulations. The role of the air phase in the hydro-mechanical behavior of triphasic mixtures can be analyzed from the interactions among multiple phases for the constitutive behavior of a solid skeleton, and the triphasic mixture model can be applied in geotechnical engineering problems, such as CO2 sequestration and air storage in aquifers.
A Multiscale Diffuse-Interface Model for Two-Phase Flow in Porous Media
Roudbari, Mahnaz Shokrpour; Verhoosel, Clemens V
2016-01-01
In this paper we consider a multiscale phase-field model for capillarity-driven flows in porous media. The presented model constitutes a reduction of the conventional Navier-Stokes-Cahn-Hilliard phase-field model, valid in situations where interest is restricted to dynamical and equilibrium behavior in an aggregated sense, rather than a precise description of microscale flow phenomena. The model is based on averaging of the equation of motion, thereby yielding a significant reduction in the complexity of the underlying Navier-Stokes-Cahn-Hilliard equations, while retaining its macroscopic dynamical and equilibrium properties. Numerical results are presented for the representative 2-dimensional capillary-rise problem pertaining to two closely spaced vertical plates with both identical and disparate wetting properties. Comparison with analytical solutions for these test cases corroborates the accuracy of the presented multiscale model. In addition, we present results for a capillary-rise problem with a non-triv...
A Monte Carlo Algorithm for Immiscible Two-Phase Flow in Porous Media
Savani, Isha; Hansen, Alex; Bedeaux, Dick; Kjelstrup, Signe; Vassvik, Morten
2016-01-01
We present a Monte Carlo algorithm based on the Metropolis algorithm for simulation of the flow of two immiscible fluids in a porous medium under macroscopic steady-state conditions using a dynamical pore network model that tracks the motion of the fluid interfaces. The Monte Carlo algorithm is based on the configuration probability, where a configuration is defined by the positions of all fluid interfaces. We show that the configuration probability is proportional to the inverse of the flow rate. Using a two-dimensional network, advancing the interfaces using time integration scales as the linear system size to the fourth power, whereas the Monte Carlo method scales as the linear size to the second power. We discuss the strengths and the weaknesses of the algorithm.
Bachrata, A.; Fichot, F.; Quintard, M.; Repetto, G.; Fleurot, J.
2012-05-01
A generalized non local-equilibrium, three-equation model was developed for the macroscopic description of two-phase flow heat and mass transfer in porous media subjected to phase change. Six pore-scale closure problems were proposed to determine all the effective transport coefficients for representative unit cells. An improved model is presented in this paper with the perspective of application to intense boiling phenomena. The objective of this paper is to present application of this model to the simulation of reflooding of severely damaged nuclear reactor cores. In case of accident at a nuclear power plant, water sources may not be available for a long period of time and the core heats up due to the residual power. Any attempt to inject water during core degradation can lead to quenching and further fragmentation of the core material. The fragmentation of fuel rods and melting of reactor core materials may result in the formation of a "debris bed". The typical particle size in a debris bed might reach few millimeters (characteristic length-scale: 1 to 5 mm), which corresponds to a high permeability porous medium. The proposed two-phase flow model is implemented in the ICARECATHARE code, developed by IRSN to study severe accident scenarios in pressurized water reactors. Currently, the French IRSN has set up two experimental facilities to study debris bed reflooding, PEARL and PRELUDE, with the objective to validate safety models. The PRELUDE program studies the complex two phase flow of water and steam in a porous medium (diameter 180 mm, height 200 mm), initially heated to a high temperature (400°C or 700°C). The series of PRELUDE experiments achieved in 2010 constitute a significant complement to the database of high temperature bottom reflood experimental data. They provide relevant data to understand the progression of the quench front and the intensity of heat transfer. Modeling accurately these experiments required improvements to the reflooding model
Energy Technology Data Exchange (ETDEWEB)
Bachrata, A.; Fichot, F.; Quintard, M.; Repetto, G.; Fleurot, J. [Institut de Radioprotection et de Surete Nucleaire, Cadarache (France); Universite de Toulouse (France); INPT, UPS (France); IMFT - Institut de Mecanique des Fluides de Toulouse, Allee Camille Soula, F-31400 Toulouse (France) and CNRS (France); IMFT, F-31400 Toulouse (France); Institut de Radioprotection et de Surete Nucleaire, Cadarache (France)
2012-05-15
A generalized non local-equilibrium, three-equation model was developed for the macroscopic description of two-phase flow heat and mass transfer in porous media subjected to phase change. Six pore-scale closure problems were proposed to determine all the effective transport coefficients for representative unit cells. An improved model is presented in this paper with the perspective of application to intense boiling phenomena. The objective of this paper is to present application of this model to the simulation of reflooding of severely damaged nuclear reactor cores. In case of accident at a nuclear power plant, water sources may not be available for a long period of time and the core heats up due to the residual power. Any attempt to inject water during core degradation can lead to quenching and further fragmentation of the core material. The fragmentation of fuel rods and melting of reactor core materials may result in the formation of a {sup d}ebris bed{sup .} The typical particle size in a debris bed might reach few millimeters (characteristic length-scale: 1 to 5 mm), which corresponds to a high permeability porous medium. The proposed two-phase flow model is implemented in the ICARECATHARE code, developed by IRSN to study severe accident scenarios in pressurized water reactors. Currently, the French IRSN has set up two experimental facilities to study debris bed reflooding, PEARL and PRELUDE, with the objective to validate safety models. The PRELUDE program studies the complex two phase flow of water and steam in a porous medium (diameter 180 mm, height 200 mm), initially heated to a high temperature (400 deg. C or 700 deg. C). The series of PRELUDE experiments achieved in 2010 constitute a significant complement to the database of high temperature bottom reflood experimental data. They provide relevant data to understand the progression of the quench front and the intensity of heat transfer. Modeling accurately these experiments required improvements to the
Effects of flow history on residual saturation during two-phase flow in porous media
Khosravian, Homa; Joekar-Niasar, Vahid; Shokri, Nima
2014-05-01
During the process of immiscible displacement of a receding fluid by an invading fluid in porous media one or more pores may be bypassed by the invading fluid as it advances through the medium. This process creates disconnected fluid clusters which are left behind, trapped in the porous structure. Enhanced knowledge of the parameters affecting the morphology and distribution of the trapped fluid in porous media is required for exploitation in various applications such as soil remediation or the enhanced oil recovery. In the present study, we investigated the effects of flooding history on the amount of the trapped fluid at different capillary numbers (defined as the ratio of viscous to capillary forces) ranging from 10-6 to 10-3. In total 43 rounds of imbibition experiments through spherical and crushed glass beads with particle sizes ranging from 0.5 to 1 mm packed in a quasi-two-dimensional transparent Hele-Shaw cell (100mm x 100mm x 4mm) were conducted. The dynamics and patterns of fluid phase distributions were visualized using a high resolution CCD camera connected to a computer. Dyed water as wetting and displacing fluid was injected into the glass cell initially saturated with the nonwetting phase which was either Soltrol 220 or PCE with the dynamics viscosity of 4.12 and 0.89 cP respectively. The injection of the displacing fluid was continued until steady state was reached and no change in the phase distribution was observed. At that point, the flow rate of the invading fluid was increased and flooding was continued until reaching a new steady-state condition. This procedure was repeated till reaching the maximum designed capillary number. Our findings have two major contributions: (a) in a fairly homogenous quasi-two dimensional model, not only the size and shape of the trapped oil clusters depend on the history of flooding but also the residual oil saturation strongly depends on the history of flooding rather than the ultimate flow rate. For example
Dynamic regimes of buoyancy-affected two-phase flow in unconsolidated porous media
Stöhr, M.; Khalili, A.
2006-03-01
The invasion and subsequent flow of a nonwetting fluid (NWF) in a three-dimensional, unconsolidated porous medium saturated with a wetting fluid of higher density and viscosity have been studied experimentally using a light-transmission technique. Distinct dynamic regimes have been found for different relative magnitudes of viscous, capillary, and gravity forces. It is shown that the ratio of viscous and hydrostatic pressure gradients can be used as a relevant dimensionless number K for the characterization of the different flow regimes. For low values of K , the invasion is characterized by the migration and fragmentation of isolated clusters of the NWF resulting from the prevalence of gravity and capillary forces. At high values of K , the dominance of viscous and gravity forces leads to an anisotropic fingerlike invasion. When the invasion stops after the breakthrough of the NWF at the open upper boundary, the invasion structure retracts under the influence of gravity and transforms into stable vertical channels. It is shown that the stability of these channels is the result of a balance between hydrostatic and viscous pressure gradients.
El-Amin, M F; Sun, Shuyu; Salama, Amgad
2013-01-01
In this paper, we introduce a mathematical model to describe the nanoparticles transport carried by a two-phase flow in a porous medium including gravity, capillary forces and Brownian diffusion. Nonlinear iterative IMPES scheme is used to solve the flow equation, and saturation and pressure are calculated at the current iteration step and then the transport equation is soved implicitly. Therefore, once the nanoparticles concentration is computed, the two equations of volume of the nanoparticles available on the pore surfaces and the volume of the nanoparticles entrapped in pore throats are solved implicitly. The porosity and the permeability variations are updated at each time step after each iteration loop. Two numerical examples, namely, regular heterogeneous permeability and random permeability are considered. We monitor the changing of the fluid and solid properties due to adding the nanoparticles. Variation of water saturation, water pressure, nanoparticles concentration and porosity are presented graph...
DEFF Research Database (Denmark)
Celia, Michael A.; Binning, Philip John
1992-01-01
. Numerical results also demonstrate the potential importance of air phase advection when considering contaminant transport in unsaturated soils. Comparison to several other numerical algorithms shows that the modified Picard approach offers robust, mass conservative solutions to the general equations......A numerical algorithm for simulation of two-phase flow in porous media is presented. The algorithm is based on a modified Picard linearization of the governing equations of flow, coupled with a lumped finite element approximation in space and dynamic time step control. Numerical results indicate...... that the algorithm produces solutions that are essentially mass conservative and oscillation free, even in the presence of steep infiltrating fronts. When the algorithm is applied to the case of air and water flow in unsaturated soils, numerical results confirm the conditions under which Richards's equation is valid...
Porous Materials - Structure and Properties
DEFF Research Database (Denmark)
Nielsen, Anders
1997-01-01
The paper presents some viewpoints on the description of the pore structure and the modelling of the properties of the porous building materials. Two examples are given , where it has been possible to connect the pore structure to the properties: Shrinkage of autoclaved aerated concrete and the p......The paper presents some viewpoints on the description of the pore structure and the modelling of the properties of the porous building materials. Two examples are given , where it has been possible to connect the pore structure to the properties: Shrinkage of autoclaved aerated concrete...
Institute of Scientific and Technical Information of China (English)
邓英尔; 刘慈群
2003-01-01
A mathematical model of two-phase fluid nonlinear flow in the direction ofnormal of ellipse through low-permeability porous media was established according to anonlinear flow law expressed in a continuous function with three parameters, a massconservation law and a concept of turbulent ellipses. A solution to the model was obtainedby using a finite difference method and an extrapolation method. Formulas of calculatingdevelopment index not only before but also after water breaks through an oil well in thecondition of two-phase fluid nonlinear flow in the media were derived. An example wasdiscussed. Water saturation distribution was presented. The moving law of drainage frontwas found. Laws of change of pressure difference with time were recognized. Results showthat there is much difference of water saturation distribution between nonlinear flow andlinear flow; that drainage front by water moves faster, water breaks through sooner and theindex gets worse because of the nonlinear flow ; and that dimensionless pressure differencegets larger at the same dimensionless time and difficulty of oil development becomes biggerby the nonlinear flow . Thus, it is necessary that influence of nonlinear flow on developmentindexes of the oil fields be taken into account. The results provide water-floodingdevelopment of the oil fields with scientific basis.
Tecklenburg, Jan; Carrera, Jesus; Dentz, Marco
2016-01-01
We study modeling of two-phase flow in highly heterogeneous fractured and porous media. The flow behaviour is strongly influenced by mass transfer between a highly permeable (mobile) fracture domain and less permeable (immobile) matrix blocks. We quantify the effective two-phase flow behaviour using a multirate rate mass transfer (MRMT) approach. We discuss the range of applicability of the MRMT approach in terms of the pertinent viscous and capillary diffusion time scales. We scrutinize the linearization of capillary diffusion in the immobile regions, which allows for the formulation of MRMT in the form of a non-local single equation model. The global memory function, which encodes mass transfer between the mobile and the immobile regions, is at the center of this method. We propose two methods to estimate the global memory function for a fracture network with given fracture and matrix geometry. Both employ a scaling approach based on the known local memory function for a given immobile region. With the firs...
DEFF Research Database (Denmark)
Johannesson, Björn; Janz, Mårten
2009-01-01
, with account also to sorption hysteresis. The different materials in the considered layered construction are assigned different properties, i.e. vapor and liquid water diffusivities and boundary (wetting and drying) sorption curves. Further, the scanning behavior between wetting and drying boundary curves...
Experimental and numerical analysis of two-phase flow in fractured porous media
Energy Technology Data Exchange (ETDEWEB)
Lindgaard, H.F.; Hoeier, C.
1998-06-01
The objective of the physical experiments was to investigate how isolated fractures embedded in the matrix influence the imbibition process and to study their impact on the effective properties of the matrix block with respect to relative permeability, absolute permeability and remaining saturations. These investigations would be carried out by constructing various types of laboratory models using an artificial material. To mimic a rising aquifer in a producing reservoir, water should be injected from below in an oil saturated laboratory model, and oil production should take place from the top of the model. In order to be able to generalise the results from the investigations in the laboratory to a producing reservoir, the model should be scaled to reservoir conditions. Because of several problems related to the generation of an appropriate matrix material, the construction of a model, which did not leak during the experiments and the establishment of the initial saturation condition of the matrix material (oil saturated at irreducible water saturation), the stated aims have not been fully achieved. Only the impact of a continuous fracture system has been investigated by laboratory experiments. The water saturation distribution in the matrix during imbibition was continuously measured by a resistivity technique. The oil phase was stained, and the propagation of the water level in the continuous fracture system was studied visually during the experiment. The impact of an internal fracture has been investigated by numerical simulations. (EG)
On strength of porous material
DEFF Research Database (Denmark)
Nielsen, Lauge Fuglsang
1999-01-01
The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus OF Rupture) of materials have been established in order to control...... to the theoretical research on non-destructive testing of such materials relating strength to stiffness and pore geometry.It is demonstrated that solutions for stiffness, tensile strength, and pore strength (damaging pore pressure, frost, fire) for some ideal porous materials can be determined theoretically only...... from knowing about pore geometry, solid phase stiffness, and zero-porosity strength. Pore geometry is the very important common denominator which controls both both stiffness and strength.The accurate results obtained are finally used to suggest generalizations with respect to strength in general...
Gas-driven subharmonic waves in a vibrated two-phase granular material.
Matas, J-P; Uehara, J; Behringer, R P
2008-04-01
Vibrated powders exhibit striking phenomena: subharmonic waves, oscillons, convection, heaping, and even bubbling. We demonstrate novel rectangular profile subharmonic waves for vibrated granular material, that occur uniquely in the two-phase case of grains, and a fluid, such as air. These waves differ substantially from those for the gas-free case, exhibit different dispersion relations, and occur for specific shaking parameters and air pressure, understandable with gas-particle flow models. These waves occur when the gas diffusively penetrates the granular layer in a time comparable to the shaker period. As the pressure is lowered towards P =0, the granular-gas system exhibits a Knudsen regime. This instability provides an opportunity to quantitatively test models of two-phase flow.
Hardening in Two-Phase Materials. II. Plastic Strain and Mean Stress Hardening Rate
DEFF Research Database (Denmark)
Lilholt, Hans
1977-01-01
The strain parameters which are relevant in a tensile experiment, are analysed and related to the geometry of deformation and to the mean stress of two-phase materials. The hardening rate of the mean stress with respect to plastic strain is found to be useful in comparison between experiments and...... and theories, and it allows theories to be probed over a range of strains. Previous experiments on the fibre-reinforced material of copper-tungsten are analysed in relation to the geometry of deformation....
Yang, Haijian
2016-12-10
Most existing methods for solving two-phase flow problems in porous media do not take the physically feasible saturation fractions between 0 and 1 into account, which often destroys the numerical accuracy and physical interpretability of the simulation. To calculate the solution without the loss of this basic requirement, we introduce a variational inequality formulation of the saturation equilibrium with a box inequality constraint, and use a conservative finite element method for the spatial discretization and a backward differentiation formula with adaptive time stepping for the temporal integration. The resulting variational inequality system at each time step is solved by using a semismooth Newton algorithm. To accelerate the Newton convergence and improve the robustness, we employ a family of adaptive nonlinear elimination methods as a nonlinear preconditioner. Some numerical results are presented to demonstrate the robustness and efficiency of the proposed algorithm. A comparison is also included to show the superiority of the proposed fully implicit approach over the classical IMplicit Pressure-Explicit Saturation (IMPES) method in terms of the time step size and the total execution time measured on a parallel computer.
Effects of gravity and inlet/outlet location on a two-phase cocurrent imbibition in porous media
El-Amin, Mohamed
2011-01-01
We introduce 2D numerical investigations of the problem of gravity and inlet/outlet location effects of water-oil two-phase cocurrent imbibition in a porous medium. Three different cases of side-, top-, and bottom-inlet location are considered. Two-dimensional computations are carried out using the finite element method. Intensive comparisons are done between considering and neglecting gravity effect on water saturation, pressures of water and oil as well as water velocity. Results are introduced either in curves or as 2D visualization graphs. The results indicate that the buoyancy effects due to gravity force take place depending on inlet location. So, the buoyancy force in the momentum equations of the co-current imbibition model cannot be neglected as done by several previous studies. Also, we note that the 2D zero gravity model has a uniform flow and may be represented as 1D flow unlike the 2D nonzero gravity model showing a nonuniform flow. Copyright 2011 M. F. El-Amin and Shuyu Sun.
Saad, Ali S.
2016-01-02
We study the convergence of a combined finite volume-nonconforming finite element scheme on general meshes for a partially miscible two-phase flow model in anisotropic porous media. This model includes capillary effects and exchange between the phases. The diffusion term, which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh. The relative permeability of each phase is decentered according to the sign of the velocity at the dual interface. The convergence of the scheme is proved thanks to an estimate on the two pressures which allows to show estimates on the discrete time and compactness results in the case of degenerate relative permeabilities. A key point in the scheme is to use particular averaging formula for the dissolution function arising in the diffusion term. We show also a simulation of hydrogen production in nuclear waste management. Numerical results are obtained by in-house numerical code. © 2015 Elsevier Ltd.
Yang, Haijian; Sun, Shuyu; Yang, Chao
2017-03-01
Most existing methods for solving two-phase flow problems in porous media do not take the physically feasible saturation fractions between 0 and 1 into account, which often destroys the numerical accuracy and physical interpretability of the simulation. To calculate the solution without the loss of this basic requirement, we introduce a variational inequality formulation of the saturation equilibrium with a box inequality constraint, and use a conservative finite element method for the spatial discretization and a backward differentiation formula with adaptive time stepping for the temporal integration. The resulting variational inequality system at each time step is solved by using a semismooth Newton algorithm. To accelerate the Newton convergence and improve the robustness, we employ a family of adaptive nonlinear elimination methods as a nonlinear preconditioner. Some numerical results are presented to demonstrate the robustness and efficiency of the proposed algorithm. A comparison is also included to show the superiority of the proposed fully implicit approach over the classical IMplicit Pressure-Explicit Saturation (IMPES) method in terms of the time step size and the total execution time measured on a parallel computer.
Borazjani, S.; Bedrikovetsky, P.; Farajzadeh, R.
2014-01-01
Analytical solutions for one-dimensional two-phase multicomponent flows in porous media describe processes of enhanced oil recovery, environmental flows of waste disposal, and contaminant propagation in subterranean reservoirs and water management in aquifers. We derive the exact solution for 3x3 hy
Diffusion in porous crystalline materials.
Krishna, Rajamani
2012-04-21
The design and development of many separation and catalytic process technologies require a proper quantitative description of diffusion of mixtures of guest molecules within porous crystalline materials. This tutorial review presents a unified, phenomenological description of diffusion inside meso- and micro-porous structures. In meso-porous materials, with pore sizes 2 nm < d(p) < 50 nm, there is a central core region where the influence of interactions of the molecules with the pore wall is either small or negligible; meso-pore diffusion is governed by a combination of molecule-molecule and molecule-pore wall interactions. Within micro-pores, with d(p) < 2 nm, the guest molecules are always under the influence of the force field exerted with the wall and we have to reckon with the motion of adsorbed molecules, and there is no "bulk" fluid region. The characteristics and physical significance of the self-, Maxwell-Stefan, and Fick diffusivities are explained with the aid of data obtained either from experiments or molecular dynamics simulations, for a wide variety of structures with different pore sizes and topology. The influence of adsorption thermodynamics, molecular clustering, and segregation on both magnitudes and concentration dependences of the diffusivities is highlighted. In mixture diffusion, correlations in molecular hops have the effect of slowing-down the more mobile species. The need for proper modeling of correlation effects using the Maxwell-Stefan formulation is stressed with the aid of examples of membrane separations and catalytic reactors.
Riaz, Amir; Tchelepi, Hamdi A.
2004-12-01
Linear stability analysis of immiscible displacements is carried out for both viscously and gravitationally unstable two-phase flows in porous media with very large adverse viscosity ratios. Capillary dispersion is the proper dissipative mechanism in this case which sets both the preferred length scale and the band width of the spectrum of unstable length scales. The growth rate, the most dangerous and the cutoff wavenumbers, all scale linearly with the capillary number. We show that the instability is governed by fluid properties across the shock rather than those across the full Buckley-Leverett profile. The shock total mobility ratio provides a sufficient condition for the onset of instability; however, it is not an appropriate criterion for predicting the magnitude of the growth rate, particularly for large viscosity ratios. The details of the relative permeability functions are observed to have a significant influence on the stability characteristics. For neutrally buoyant flows the maximum growth rate scales linearly with the viscosity ratio while the most dangerous and the cutoff wavenumbers scale with the square root of the viscosity ratio. In the case of displacements with density contrast, the maximum growth rate scales with the square of the unstable gravity number while the most dangerous and the cutoff wavenumbers scale with an exponent of 1.2, for all viscosity ratios. A marginal stability curve is computed for stable and unstable regions in the parameter space of the viscosity ratio and the gravity number. It is found that flows with unstable viscosity contrasts are more readily stabilized with buoyancy as compared to the viscous stabilization of gravitationally unstable flows.
OCV Hysteresis in Li-Ion Batteries including Two-Phase Transition Materials
Directory of Open Access Journals (Sweden)
Michael A. Roscher
2011-01-01
Full Text Available The relation between batteries' state of charge (SOC and open-circuit voltage (OCV is a specific feature of electrochemical energy storage devices. Especially NiMH batteries are well known to exhibit OCV hysteresis, and also several kinds of lithium-ion batteries show OCV hysteresis, which can be critical for reliable state estimation issues. Electrode potential hysteresis is known to result from thermodynamical entropic effects, mechanical stress, and microscopic distortions within the active electrode materials which perform a two-phase transition during lithium insertion/extraction. Hence, some Li-ion cells including two-phase transition active materials show pronounced hysteresis referring to their open-circuit voltage. This work points out how macroscopic effects, that is, diffusion limitations, superimpose the latte- mentioned microscopic mechanisms and lead to a shrinkage of OCV hysteresis, if cells are loaded with high current rates. To validate the mentioned interaction, Li-ion cells' state of charge is adjusted to 50% with various current rates, beginning from the fully charged and the discharged state, respectively. As a pronounced difference remains between the OCV after charge and discharge adjustment, obviously the hysteresis vanishes as the target SOC is adjusted with very high current rate.
Raeini, Ali Q.; Blunt, Martin J.; Bijeljic, Branko
2014-12-01
Pore-scale forces have a significant effect on the macroscopic behaviour of multiphase flow through porous media. This paper studies the effect of these forces using a new volume-of-fluid based finite volume method developed for simulating two-phase flow directly on micro-CT images of porous media. An analytical analysis of the relationship between the pore-scale forces and the Darcy-scale pressure drops is presented. We use this analysis to propose unambiguous definitions of Darcy-scale viscous pressure drops as the rate of energy dissipation per unit flow rate of each phase, and then use them to obtain the relative permeability curves. We show that this definition is consistent with conventional laboratory/field measurements by comparing our predictions with experimental relative permeability. We present single and two-phase flow simulations for primary oil injection followed by water injection on a sandpack and a Berea sandstone. The two-phase flow simulations are presented at different capillary numbers which cover the transition from capillary fingering at low capillary numbers to a more viscous fingering displacement pattern at higher capillary numbers, and the effect of capillary number on the relative permeability curves is investigated. Overall, this paper presents a new finite volume-based methodology for the detailed analysis of two-phase flow directly on micro-CT images of porous media and upscaling of the results to the Darcy scale.
Meso-Scale Modeling of Spall in a Heterogeneous Two-Phase Material
Energy Technology Data Exchange (ETDEWEB)
Springer, Harry Keo [Univ. of California, Davis, CA (United States)
2008-07-11
The influence of the heterogeneous second-phase particle structure and applied loading conditions on the ductile spall response of a model two-phase material was investigated. Quantitative metallography, three-dimensional (3D) meso-scale simulations (MSS), and small-scale spall experiments provided the foundation for this study. Nodular ductile iron (NDI) was selected as the model two-phase material for this study because it contains a large and readily identifiable second- phase particle population. Second-phase particles serve as the primary void nucleation sites in NDI and are, therefore, central to its ductile spall response. A mathematical model was developed for the NDI second-phase volume fraction that accounted for the non-uniform particle size and spacing distributions within the framework of a length-scale dependent Gaussian probability distribution function (PDF). This model was based on novel multiscale sampling measurements. A methodology was also developed for the computer generation of representative particle structures based on their mathematical description, enabling 3D MSS. MSS were used to investigate the effects of second-phase particle volume fraction and particle size, loading conditions, and physical domain size of simulation on the ductile spall response of a model two-phase material. MSS results reinforce existing model predictions, where the spall strength metric (SSM) logarithmically decreases with increasing particle volume fraction. While SSM predictions are nearly independent of applied load conditions at lower loading rates, which is consistent with previous studies, loading dependencies are observed at higher loading rates. There is also a logarithmic decrease in SSM for increasing (initial) void size, as well. A model was developed to account for the effects of loading rate, particle size, matrix sound-speed, and, in the NDI-specific case, the probabilistic particle volume fraction model. Small-scale spall experiments were designed
Büsing, Henrik
2014-05-01
The geological sequestration of CO2 is considered as one option to mitigate anthropogenic effects on climate change. To describe the behavior of CO2 underground we consider mass balance equations for the two phases, CO2 and brine, which include the dissolution of CO2 into the brine phase and of H2O into the gas phase (c.f. [1]). After discretization in time with the implicit Euler method and in space with the Box method (c.f. [2]), we end up with a nonlinear system of equations. Newton's method is used to solve these systems, where the required Jacobians are obtained by automatic differentiation (AD) (c.f. [3]). In contrast to approximate Jacobians via finite differences, AD gives exact Jacobians through a source code transformation. These exact Jacobians have the advantage that no additional errors are introduced by the derivative computation. In consequence, fewer Newton iterations are needed and a performance increase during derivative computation can be observed (c.f. [4]). During the initial stage of a CO2 sequestration scenario the movement of the CO2 plume is driven by advective and buoyancy forces. After injection is finished solubility and density driven flow become dominant. We examine the performance of different iterative solvers and preconditioners for these two stages. To this end, we consider standard ILU preconditioning with BiCGStab as iterative solver, as well as GMRES, and algebraic and geometric multigrid methods. Our test example considers, on the one hand, a homogeneous permeability distribution and, on the other hand, a heterogeneous one. In the latter case we sample a heterogeneous porosity field from a Gaussian distribution and, subsequently, derive the corresponding permeabilities after [5]. Finally, we examine to which extent the amount of dissolved CO2 depends on the heterogeneities in the reservoir. References [1] Spycher, N., Pruess, K., & Ennis-King, J., 2003. CO2-H2O mixtures in the geological sequestration of CO2. I. Assessment and
Directory of Open Access Journals (Sweden)
. Dr. S. Rawat
2014-01-01
Full Text Available A mathematical model is presented for the steady, two-dimensional magneto-convection heat transfer of a two-phase, electrically-conducting, particle-suspension in a channel containing a non-Darcian porous medium intercalated between two parallel plates, in the presence of a transverse magnetic field. The channel walls are assumed to be isothermal but at different temperatures. The governing equations for the one-dimensional steady flow are formulated following Marble (1970 and extended to include the influence of Darcian porous drag, Forcheimmer quadratic drag, buoyancy effects, Lorentz body force (hydromagnetic retardation force and particle-phase viscous stresses. Special boundary conditions for the particle-phase wall conditions are implemented. The governing coupled, non-linear differential equations are reduced from an (x,y coordinate system to a one-dimensional (y coordinate system. A series of transformations is then employed to non-dimensionalize the model in terms of a single independent variable, , yielding a quartet of coupled ordinary differential equations which are solved numerically using the finite element method, under appropriate transformed boundary conditions. The influence of for example Grashof free convection number (Gr, Hartmann hydromagnetic number (Ha, inverse Stokes number (Skm, Darcy number (Da, Forcheimmer number (Fs,particle loading parameter (PL, buoyancy parameter (B on the fluid-phase velocity and particle-phase velocity are presented graphically. A number of special cases of the transformed model are also studied. The mathematical model finds applications in solar collector devices, electronic fabrication, jet nozzle flows, industrial materials processing transport phenomena, MHD energy generator systems etc.
Directory of Open Access Journals (Sweden)
S. Borazjani
2014-01-01
Full Text Available Analytical solutions for one-dimensional two-phase multicomponent flows in porous media describe processes of enhanced oil recovery, environmental flows of waste disposal, and contaminant propagation in subterranean reservoirs and water management in aquifers. We derive the exact solution for 3×3 hyperbolic system of conservation laws that corresponds to two-phase four-component flow in porous media where sorption of the third component depends on its own concentration in water and also on the fourth component concentration. Using the potential function as an independent variable instead of time allows splitting the initial system to 2×2 system for concentrations and one scalar hyperbolic equation for phase saturation, which allows for full integration of non-self-similar problem with wave interactions.
Mosthaf, K.; Baber, B.; Flemisch, B.; Helmig, R.; Leijnse, A.; Rybak, I.; Wohlmuth, B.
2011-01-01
Domains composed of a porous part and an adjacent free-flow region are of special interest in many fields of application. So far, the coupling of free flow with porous-media flow has been considered only for single-phase systems. Here we extend this classical concept to two-component nonisothermal f
Preparation and characterization of porous magnesium materials
Institute of Scientific and Technical Information of China (English)
LIU Xi-qin; LIU Zi-li; ZHANG Xiao-hong; FENG Jun-dong; YU Ta-xi
2006-01-01
The proper spacer material and the preparation technology for biological compatible porous magnesium materials were explored by the powder metallurgy method, and microstructures, porosity and mechanical properties of sintered porous magnesium were investigated. The results show that compared with spacer materials of NH4CO3, NH3Cl and carbamide, NH4CO3 is the best one for preparation of sintered porous magnesium, and the worst one is NH3Cl. The isolated blind pores are formed mainly by the particle interval of the magnesium powders. Adding spacer material favors the formation of open pores, while has little contribution to the formation of blind pores. The overall porosity and porosity of open pore of the sintered porous magnesium increase with the increase of added spacer material, while decrease with the increase of the molding stress. The mechanical properties of sintered porous magnesium increase with decreasing addition of spacer material and increasing molding stress.
Zeggwagh, G; Bellet, D
1987-01-01
A theoretical study concerning two-component fluid pulsating flow through porous conical ducts is presented. The model corresponds to blood flows through small diameter porous conical vessels. This approach is based on a finite difference method. The physical hypothesis used were based on findings from simultaneous visualization methods. The influence of geometrical, hydrodynamical and structural parameters is systematically examined and related to velocity profiles, hydrostatic pressure.
Energy Technology Data Exchange (ETDEWEB)
Lebensohn, Ricardo A [Los Alamos National Laboratory; Lee, Sukbin [CMU; Rollett, Anthony D [CMU
2009-01-01
A viscoplastic approach using the Fast Fourier Transform (FFT) method for obtaining local mechanical response is utilized to study microstructure-property relationships in composite materials. Specifically, three-dimensional, two-phase digital materials containing isotropically coarsened particles surrounded by a matrix phase, generated through a Kinetic Monte Carlo Potts model for Ostwald ripening, are used as instantiations in order to calculate the stress and strain rate fields under uniaxial tension. The effects of the morphology of the matrix phase, the volume fraction and the contiguity of particles, and the polycrystallinity of matrix phase, on the stress and strain rate fields under uniaxial tension are examined. It is found that the first moments of the stress and strain rate fields have a different dependence on the particle volume fraction and the particle contiguity from their second moments. The average stresses and average strain rates of both phases and of the overall composite have rather simple relationships with the particle volume fraction whereas their standard deviations vary strongly, especially when the particle volume fraction is high, and the contiguity of particles has a noticeable effect on the mechanical response. It is also found that the shape of stress distribution in the BCC hard particle phase evolves as the volume fraction of particles in the composite varies, such that it agrees with the stress field in the BCC polycrystal as the volume of particles approaches unity. Finally, it is observed that the stress and strain rate fields in the microstructures with a polycrystalline matrix are less sensitive to changes in volume fraction and contiguity of particles.
CTH Implementation of a Two-Phase Material Model With Strength: Application to Porous Materials
2012-07-01
The idea of fitting constants τ0 and D0 in [13] is based on an approximation of the stationary solution of the viscoelastic model equations [17]. It...limit is Y = σ11 and 11 xu . Therefore, the stationary point of (16) after index summation can be found from .2 YG The last...concentration c (CMS variable); iii) scalar volume concentration θ ( TET variable); iv) scalar entropy disequilibrium χ (XI variable); v) symmetric strain
Escher, Joachim; Matioc, Bogdan-Vasile
2011-01-01
We prove global existence of nonnegative weak solutions to a degenerate parabolic system which models the interaction of two thin fluid films in a porous medium. Furthermore, we show that these weak solutions converge at an exponential rate towards flat equilibria.
Energy Technology Data Exchange (ETDEWEB)
Lasseter, T.J.; Karakas, M.
1982-01-01
A simple numerical method has been developed that largely eliminates numerical diffusion errors associated with saturation discontinuities or shocks for two-phase flow in one and two dimensions. The important aspect of the approach is the computation of a variable weighting factor for the interface fractional flow between grid blocks. The approach appears to be generalizable to the multicomponent, multidimensional case including gravity and capilarity. 5 refs.
Mu, Yaoming; Sungkorn, Radompon; Toelke, Jonas
2016-09-01
In this paper, we extend pore-morphology-based methods proposed by Hazlett (1995) and Hilpert and Miller (2001) to simulate drainage and imbibition in uniformly wetting porous media and add an (optional) entrapment of the (non-)wetting phase. By improving implementation, this method allows us to identify the statistical representative elementary volume and estimate uncertainty by computing fluid flow properties and saturation distributions of hundreds of subsamples within a reasonable time-frame. The method was utilized to study three different porous medium systems and results demonstrate that morphology-based pore-scale modeling is a viable approach to assess the representative elementary volume with respect to capillary dominated two-phase flow. The focus of this paper is the determination of the representative elementary volume for multiphase-flow properties for a digital representation of a rock.
Ordered and disordered porous materials for nanofiltration application
Chowdhury, Sankhanilay Roy
2005-01-01
This Ph.D. dissertation elaborates on the use of porous materials in fluid separation technology. Two different types of porous materials, namely surfactant templated silica and alumina have been used to prepare flat plate geometry porous membranes.
Methane storage in advanced porous materials.
Makal, Trevor A; Li, Jian-Rong; Lu, Weigang; Zhou, Hong-Cai
2012-12-07
The need for alternative fuels is greater now than ever before. With considerable sources available and low pollution factor, methane is a natural choice as petroleum replacement in cars and other mobile applications. However, efficient storage methods are still lacking to implement the application of methane in the automotive industry. Advanced porous materials, metal-organic frameworks and porous organic polymers, have received considerable attention in sorptive storage applications owing to their exceptionally high surface areas and chemically-tunable structures. In this critical review we provide an overview of the current status of the application of these two types of advanced porous materials in the storage of methane. Examples of materials exhibiting high methane storage capacities are analyzed and methods for increasing the applicability of these advanced porous materials in methane storage technologies described.
Bourgeat, Alain; Smaï, Farid
2008-01-01
We derive a compositional compressible two-phase, liquid and gas, flow model for numerical simulations of hydrogen migration in deep geological repository for radioactive waste. This model includes capillary effects and the gas high diffusivity. Moreover, it is written in variables (total hydrogen mass density and liquid pressure) chosen in order to be consistent with gas appearance or disappearance. We discuss the well possedness of this model and give some computational evidences of its adequacy to simulate gas generation in a water saturated repository.
On modeling shape memory polymers as elastic two-phase composite materials
Gilormini, Pierre; Diani, Julie
2012-01-01
International audience; A model has been proposed recently, which describes the experimentally observed mechanical behavior of some shape memory polymers. It considers a purely thermoelastic behavior, without strain rate effects, and assumes essentially that the polymer can be considered as a two-phase composite, with glassy and rubbery phases having volume fractions that depend on temperature only. Since a uniform stress hypothesis was used in the original formulation, with an inconsistency ...
Yohan, D.; Gerald, D.; Magali, G.; Michel, Q.
2008-12-01
The general problem of transport and reaction in multiphase porous media has been a subject of extensive studies during the last decades. For example, biologically mediated porous media have seen a long history of research from the environmental engineering point of view. Biofilms (aggregate of microorganisms coated in a polymer matrix generated by bacteria) have been particularly examined within the context of bioremediation in the subsurface zone. Five types of models may be used to describe these kinds of physical system: 1) one-equation local mass equilibrium models when the assumption of local mass equilibrium is valid 2) two equations models when the assumption of local mass equilibrium is not valid 3) one equation non-equilibrium models 4) mixed models coupling equations solved at two different scales 5) one equation time-asymptotic models. In this presentation, we use the method of volume averaging with closure to extend the time- asymptotic model at the Darcy scale to the reactive case. Closure problems are solved for simple unit cells, and the macro-scale model is validated against pore-scale simulations.
Sweijen, Thomas; Hartog, Niels; Marsman, Annemieke; Keijzer, Thomas J. S.
2014-06-01
Mercury is a contaminant of global concern. The use of elemental mercury in various (former) industrial processes, such as chlorine production at chlor-alkali plants, is known to have resulted in soil and groundwater contaminations worldwide. However, the subsurface transport behaviour of elemental mercury as an immiscible dense non-aqueous phase liquid (DNAPL) in porous media has received minimal attention to date. Even though, such insight would aid in the remediation effort of mercury contaminated sites. Therefore, in this study a detailed field characterization of elemental mercury DNAPL distribution with depth was performed together with two-phase flow modelling, using STOMP. This is to evaluate the dynamics of mercury DNAPL migration and the controls on its distribution in saturated porous media. Using a CPT-probe mounted with a digital camera, in-situ mercury DNAPL depth distribution was obtained at a former chlor-alkali-plant, down to 9 m below ground surface. Images revealing the presence of silvery mercury DNAPL droplets were used to quantify its distribution, characteristics and saturation, using an image analysis method. These field-observations with depth were compared with results from a one-dimensional two-phase flow model simulation for the same transect. Considering the limitations of this approach, simulations reasonably reflected the variability and range of the mercury DNAPL distribution. To further explore the impact of mercury's physical properties in comparison with more common DNAPLs, the migration of mercury and PCE DNAPL in several typical hydrological scenarios was simulated. Comparison of the simulations suggest that mercury's higher density is the overall controlling factor in controlling its penetration in saturated porous media, despite its higher resistance to flow due to its higher viscosity. Based on these results the hazard of spilled mercury DNAPL to cause deep contamination of groundwater systems seems larger than for any other
Flovik, Vegard; Hansen, Alex
2015-01-01
The change in contact angles due to the injection of low salinity water or any other wettability altering agent in an oil-rich porous medium is modeled by a network model of disordered pores transporting two immiscible fluids. We introduce a dynamic wettability altering mechanism, where the time dependent wetting property of each pore is determined by the cumulative flow of water through it. Simulations are performed to reach steady-state for different possible alterations in the wetting angle ($\\theta$). We find that deviation from oil-wet conditions re-mobilizes the stuck clusters and increases the oil fractional flow. However, the rate of increase in the fractional flow depends strongly on $\\theta$ and as $\\theta\\to 90^\\circ$, a critical angle, the system shows critical slowing down which is characterized by two dynamic critical exponents.
Directory of Open Access Journals (Sweden)
Vegard eFlovik
2015-11-01
Full Text Available The change in contact angles due to the injection of low salinity water or any other wettability altering agent in an oil-rich porous medium is modeled by a network model of disordered pores transporting two immiscible fluids. We introduce a dynamic wettability altering mechanism, where the time dependent wetting property of each pore is determined by the cumulative flow of water through it. Simulations are performed to reach steady-state for different possible alterations in the wetting angle (θ. We find that deviation from oil-wet conditions re-mobilizes the stuck clusters and increases the oil fractional flow. However, the rate of increase in the fractional flow depends strongly on θ and as θ → 90◦ , a critical angle, the system shows critical slowing down which is characterized by two dynamic critical exponents.
Huang, Y.; Shao, H.; Thullner, M.; Kolditz, O.
2014-12-01
In applications of Deep Geothermal reservoirs, thermal recovery processes, and contaminated groundwater sites, the multiphase multicomponent flow and transport processes are often considered the most important underlying physical process. In particular, the behavior of phase appearance and disappearance is the critical to the performance of many geo-reservoirs, and great interests exit in the scientific community to simulate this coupled process. This work is devoted to the modeling and simulation of two-phase, two components flow and transport in the porous medium, whereas the phase change behavior in non-isothermal conditions is considered. In this work, we have implemented the algorithm developed by Marchand, et al., into the open source scientific software OpenGeoSys. The governing equation is formulated in terms of molar fraction of the light component and mean pressure as the persistent primary variables, which leads to a fully coupled nonlinear PDE system. One of the important advantages of this approach is avoiding the primary variables switching between single phase and two phase zones, so that this uniform system can be applied to describe the behavior of phase change. On the other hand, due to the number of unkown variables closure relationships are also formulated to close the whole equation system by using the approach of complementarity constrains. For the numerical technical scheme: The standard Galerkin Finite element method is applied for space discretization, while a fully implicit scheme for the time discretization, and Newton-Raphson method is utilized for the global linearization, as well as the closure relationship. This model is verified based on one test case developed to simulate the heat pipe problem. This benchmark involves two-phase two-component flow in saturated/unsaturated porous media under non-isothermal condition, including phase change and mineral-water geochemical reactive transport processes. The simulation results will be
Saad, Bilal Mohammed
2014-06-28
We propose and analyze a combined finite volume-nonconforming finite element scheme on general meshes to simulate the two compressible phase flow in porous media. The diffusion term, which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh, where the dual volumes are constructed around the sides of the original mesh. The relative permeability of each phase is decentred according the sign of the velocity at the dual interface. This technique also ensures the validity of the discrete maximum principle for the saturation under a non restrictive shape regularity of the space mesh and the positiveness of all transmissibilities. Next, a priori estimates on the pressures and a function of the saturation that denote capillary terms are established. These stabilities results lead to some compactness arguments based on the use of the Kolmogorov compactness theorem, and allow us to derive the convergence of a subsequence of the sequence of approximate solutions to a weak solution of the continuous equations, provided the mesh size tends to zero. The proof is given for the complete system when the density of the each phase depends on its own pressure. © 2014 Springer-Verlag Berlin Heidelberg.
Conservation laws with non-convex flux and applications to two-phase flow in porous media
Energy Technology Data Exchange (ETDEWEB)
Tegnander, Cathrine
1998-12-31
This thesis deals with conservation laws, which form a family of partial differential equations (PDEs) describing conservation of mass, momentum and energy. The first part studies some theoretical aspects of conservation laws: (1) Scalar hyperbolic conservation laws with a non-convex flux function, where time dependent decay estimates are mainly obtained by a front tracking technique, (2) Convergence of solutions for a finite difference scheme given by a class of one dimensional parabolic systems. The second part of the thesis applies the theory to multiphase flow in porous media. A number of mathematical models for multiphase flow in groundwater are studied. Techniques to improve the study of simulations of oil, gas and water phases in reservoirs such as in the North Sea are discussed. Upscaling of a refinement of the permeability field is evaluated using a flow simulation. This is done by a study of the preserving of the rank of a number of realizations with respect to the cumulative production parameter. Finally, the importance of selection of numerical methods in the simulations are exemplified by considering various splitting techniques. The numerical methods of front tracking and finite difference schemes and finite element methods are used. 98 refs., 24 figs., 18 tabs.
An $h$-Adaptive Operator Splitting Method for Two-Phase Flow in 3D Heterogeneous Porous Media
Chueh, Chih-Che
2013-01-01
The simulation of multiphase flow in porous media is a ubiquitous problem in a wide variety of fields, such as fuel cell modeling, oil reservoir simulation, magma dynamics, and tumor modeling. However, it is computationally expensive. This paper presents an interconnected set of algorithms which we show can accelerate computations by more than two orders of magnitude compared to traditional techniques, yet retains the high accuracy necessary for practical applications. Specifically, we base our approach on a new adaptive operator splitting technique driven by an a posteriori criterion to separate the flow from the transport equations, adaptive meshing to reduce the size of the discretized problem, efficient block preconditioned solver techniques for fast solution of the discrete equations, and a recently developed artificial diffusion strategy to stabilize the numerical solution of the transport equation. We demonstrate the accuracy and efficiency of our approach using numerical experiments in one, two, and three dimensions using a program that is made available as part of a large open source library. © 2013 Society for Industrial and Applied Mathematics.
Tribological Property of Polyimide Porous Materials
Institute of Scientific and Technical Information of China (English)
PU Yu-ping; L(U) Guang-shu; LI Xiao-jun; XIAO Han-cheng
2006-01-01
The friction performance of the polyimide (PI) porous composite materials made by moulding method with MoS2 or polytetrafluoroethylene (PTFE) appended are disserted. The result shows that all the PI-based porous composites have the performance of transfer lubrication in the friction process, and the transfer film is built between the counter friction bodies; with the increasing of the MoS2 a mount from 0 to 20%, the friction coefficient trends toward decrease, and the tr ansfer lubricate phenomenon become more obvious; when adding PTFE as synergist t o the porous PI+MoS2 composite material, the synergistic effect happens, which can improve the friction performance of the material effectively.
Natural porous agar materials from macroalgae.
Francavilla, Matteo; Pineda, Antonio; Lin, Carol S K; Franchi, Massimo; Trotta, Pasquale; Romero, Antonio A; Luque, Rafael
2013-02-15
Porous agar materials have been prepared from marine macroalgae species using a simple microwave-assisted extraction/drying methodology, providing a new family of polysaccharide derived porous solids. The microwave-assisted extraction allows a more efficient and less time-consuming extraction of the polysaccharide compared to conventional extraction protocols based on conventional heating. DRIFT and (13)C NMR results indicated that the internal agar structure (based on d-galactose and 3,6-anhydro-l-galactose linked units) was preserved after the extraction methodology, which opens a wide range of future possibilities and applications for this new family of porous polysaccharides. The extracted agar materials, which have already applications per se due to their high purities, could be subsequently transformed into a novel family of attractive mesoporous agar materials that could be used as natural templates for the production of nanocrystals of metal oxides.
Zhang, Duo; Papadikis, K.; Gu, Sai
2016-09-01
In the current paper, the effect of the geometrical characteristics of 2-D porous media on the relative permeability in immiscible two-phase flows is studied. The generation of the different artificial porous media is performed using a Boolean model based on a random distribution of overlapping circles/ellipses, the size and shape of which are chosen to satisfy the specific Minkowski functionals (i.e. volume fraction, solid line contour length, connectivity). The study aims to identify how each different Minkowski functional affects the relative permeability of each phase at various saturations of the non-wetting phase. A 2-D multi-relaxation time (MRT) lattice Boltzmann model (LBM) that can handle high density ratios is employed in the simulation. The relationship between the driving forces G and the relative permeabilities of the two phases for every artificial structure is quantified. It is found that for high non-wetting phase saturations (fully connected flow), a non-linear relationship exists between the non-wetting phase flow rate and the driving force, whilst this relationship becomes linear at higher magnitudes of the latter. The force magnitude required to approach the linear region is highly influenced by the pore size distribution and the connectivity of the solid phase. For lower non-wetting phase saturation values, its relative permeability in the linear regime decreases as the fraction of small pores in the structure increases and the non-wetting phase flow becomes disconnected. A strong influence of the solid phase connectivity is also observed.
Institute of Scientific and Technical Information of China (English)
LIU Jinxi; LIU Ai; JIANG Zhiqing
2004-01-01
The interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric medium is investigated. Closed-form solutions of the elastic and electrical fields induced by the screw dislocation are derived using the conformal mapping method in conjunction with the image principle. Based on the electroelastic fields derived, the stress and electric displacement intensity factors, the image force acting on the dislocation are given explicitly. We find that the stress and electric displacement intensity factors depend on the effective electroelastic material constants. In the case where one of two phases is purely elastic, the stress intensity factor and image force are plotted to illustrate the influences of electromechanical coupling effect, the position of the dislocation and the material properties on the interaction mechanism.
Optimal Design of Porous Materials
DEFF Research Database (Denmark)
Andreassen, Erik
The focus of this thesis is topology optimization of material microstructures. That is, creating new materials, with attractive properties, by combining classic materials in periodic patterns. First, large-scale topology optimization is used to design complicated three-dimensional materials with ...
Tuneable porous carbonaceous materials from renewable resources.
White, Robin J; Budarin, Vitaly; Luque, Rafael; Clark, James H; Macquarrie, Duncan J
2009-12-01
Porous carbon materials are ubiquitous with a wide range of technologically important applications, including separation science, heterogeneous catalyst supports, water purification filters, stationary phase materials, as well as the developing future areas of energy generation and storage applications. Hard template routes to ordered mesoporous carbons are well established, but whilst offering different mesoscopic textural phases, the surface of the material is difficult to chemically post-modify and processing is energy, resource and step intensive. The production of carbon materials from biomass (i.e. sugars or polysaccharides) is a relatively new but rapidly expanding research area. In this tutorial review, we compare and contrast recently reported routes to the preparation of porous carbon materials derived from renewable resources, with examples of our previously reported mesoporous polysaccharide-derived "Starbon" carbonaceous material technology.
Simon, Moritz
2014-11-14
© 2014, Springer Science+Business Media New York. With the target of optimizing CO
Arbogast, Todd
2012-01-01
Motivated by possible generalizations to more complex multiphase multicomponent systems in higher dimensions, we develop an Eulerian-Lagrangian numerical approximation for a system of two conservation laws in one space dimension modeling a simplified two-phase flow problem in a porous medium. The method is based on following tracelines, so it is stable independent of any CFL constraint. The main difficulty is that it is not possible to follow individual tracelines independently. We approximate tracing along the tracelines by using local mass conservation principles and self-consistency. The two-phase flow problem is governed by a system of equations representing mass conservation of each phase, so there are two local mass conservation principles. Our numerical method respects both of these conservation principles over the computational mesh (i.e., locally), and so is a fully conservative traceline method. We present numerical results that demonstrate the ability of the method to handle problems with shocks and rarefactions, and to do so with very coarse spatial grids and time steps larger than the CFL limit. © 2012 Society for Industrial and Applied Mathematics.
El-Amin, Mohamed
2017-08-28
In this paper, the magnetic nanoparticles are injected into a water-oil, two-phase system under the influence of an external permanent magnetic field. We lay down the mathematical model and provide a set of numerical exercises of hypothetical cases to show how an external magnetic field can influence the transport of nanoparticles in the proposed two-phase system in porous media. We treat the water-nanoparticles suspension as a miscible mixture, whereas it is immiscible with the oil phase. The magnetization properties, the density, and the viscosity of the ferrofluids are obtained based on mixture theory relationships. In the mathematical model, the phase pressure contains additional term to account for the extra pressures due to fluid magnetization effect and the magnetostrictive effect. As a proof of concept, the proposed model is applied on a countercurrent imbibition flow system in which both the displacing and the displaced fluids move in opposite directions. Physical variables, including waternanoparticles suspension saturation, nanoparticles concentration, and pore wall/throat concentrations of deposited nanoparticles, are investigated under the influence of the magnetic field. Two different locations of the magnet are studied numerically, and variations in permeability and porosity are considered.
Energy Technology Data Exchange (ETDEWEB)
Wang, W.; Rutqvist, J.; Gorke, U.-J.; Birkholzer, J.T.; Kolditz, O.
2010-03-15
The present work compares the performance of two alternative flow models for the simulation of thermal-hydraulic coupled processes in low permeable porous media: non-isothermal Richards and two-phase flow concepts. Both models take vaporization processes into account: however, the Richards model neglects dynamic pressure variations and bulk flow of the gaseous phase. For the comparison of the two approaches first published data from a laboratory experiment is studied involving thermally driven moisture flow in a partially saturated bentonite sample. Then a benchmark test of longer-term thermal-hydraulic behavior in the engineered barrier system of a geological nuclear waste repository is analyzed (DECOVALEX project). It was found that both models can be used to reproduce the vaporization process if the intrinsic permeability is relative high. However, when a thermal-hydraulic coupled problem has the same low intrinsic permeability for both the liquid and the gas phase, only the two-phase flow approach provides reasonable results.
Hydrogen storage by physisorption on porous materials
Energy Technology Data Exchange (ETDEWEB)
Panella, B.
2006-09-13
A great challenge for commercializing hydrogen powered vehicles is on-board hydrogen storage using economic and secure systems. A possible solution is hydrogen storage in light-weight solid materials. Here three principle storage mechanisms can be distinguished: i) absorption of hydrogen in metals ii) formation of compounds with ionic character, like complex hydrides and iii) physisorption (or physical adsorption) of hydrogen molecules on porous materials. Physical adsorption exhibits several advantages over chemical hydrogen storage as for example the complete reversibility and the fast kinetics. Two classes of porous materials were investigated for physical hydrogen storage, i.e. different carbon nanostructures and crystalline metal-organic frameworks possessing extremely high specific surface area. Hydrogen adsorption isotherms were measured using a Sieverts' apparatus both at room temperature and at 77 K at pressures up to the saturation regime. Additionally, the adsorption sites of hydrogen in these porous materials were identified using thermal desorption spectroscopy extended to very low temperatures (down to 20 K). Furthermore, the adsorbed hydrogen phase was studied in various materials using Raman spectroscopy at different pressures and temperatures. The results show that the maximum hydrogen storage capacity of porous materials correlates linearly with the specific surface area and is independent of structure and composition. In addition the pore structure of the adsorbent plays an important role for hydrogen storage since the adsorption sites for H2 could be assigned to pores possessing different dimensions. Accordingly it was shown that small pores are necessary to reach high storage capacities already at low pressures. This new understanding may help to tailor and optimize new porous materials for hydrogen storage. (orig.)
MACROSCOPIC STRAIN POTENTIALS IN NONLINEAR POROUS MATERIALS
Institute of Scientific and Technical Information of China (English)
刘熠; 黄筑平
2003-01-01
By taking a hollow sphere as a representative volume element (RVE), the macroscopic strain potentials of porous materials with power-law incompressible matrix are studied in this paper.According to the principles of the minimum potential energy in nonlinear elasticity and the variational procedure, static admissible stress fields and kinematic admissible displacement fields are constructed,and hence the upper and the lower bounds of the macroscopic strain potential are obtained. The bounds given in the present paper differ so slightly that they both provide perfect approximations of the exact strain potential of the studied porous materials. It is also found that the upper bound proposed by previous authors is much higher than the present one, and the lower bounds given by Cocks is much lower. Moreover, the present calculation is also compared with the variational lower bound of Ponte Castafneda for statistically isotropic porous materials. Finally, the validity of the hollow spherical RVE for the studied nonlinear porous material is discussed by the difference between the present numerical results and the Cocks bound.
Porous Silicon—A Versatile Host Material
Directory of Open Access Journals (Sweden)
Klemens Rumpf
2010-02-01
Full Text Available This work reviews the use of porous silicon (PS as a nanomaterial which is extensively investigated and utilized for various applications, e.g., in the fields of optics, sensor technology and biomedicine. Furthermore the combination of PS with one or more materials which are also nanostructured due to their deposition within the porous matrix is discussed. Such nanocompounds offer a broad avenue of new and interesting properties depending on the kind of involved materials as well as on their morphology. The filling of the pores performed by electroless or electrochemical deposition is described, whereas different morphologies, reaching from micro- to macro pores are utilized as host material which can be self-organized or fabricated by prestructuring. For metal-deposition within the porous structures, both ferromagnetic and non-magnetic metals are used. Emphasis will be put on self-arranged mesoporous silicon, offering a quasi-regular pore arrangement, employed as template for filling with ferromagnetic metals. By varying the deposition parameters the precipitation of the metal structures within the pores can be tuned in geometry and spatial distribution leading to samples with desired magnetic properties. The correlation between morphology and magnetic behaviour of such semiconducting/magnetic systems will be determined. Porous silicon and its combination with a variety of filling materials leads to nanocomposites with specific physical properties caused by the nanometric size and give rise to a multiplicity of potential applications in spintronics, magnetic and magneto-optic devices, nutritional food additives as well as drug delivery.
Porous graphene materials for water remediation.
Niu, Zhiqiang; Liu, Lili; Zhang, Li; Chen, Xiaodong
2014-09-10
Water remediation has been a critical issue over the past decades due to the expansion of wastewater discharge to the environment. Currently, a variety of functional materials have been successfully prepared for water remediation applications. Among them, graphene is an attractive candidate due to its high specific surface area, tunable surface behavior, and high strength. This Concept paper summarizes the design strategy of porous graphene materials and their applications in water remediation, such as the cleanup of oil, removal of heavy metal ions, and elimination of water soluble organic contaminants. The progress made so far will guide further development in structure design strategy of porous materials based on graphene and exploration of such materials in environmental remediation.
Filter casting nanoscale porous materials
Hayes, Joel Ryan; Nyce, Gregory Walker; Kuntz, Jushua David
2013-12-10
A method of producing nanoporous material includes the steps of providing a liquid, providing nanoparticles, producing a slurry of the liquid and the nanoparticles, removing the liquid from the slurry, and producing monolith.
Hardening in Two-Phase Materials. I. Strength Contributions in Fibre-Reinforced Copper-Tungsten
DEFF Research Database (Denmark)
Lilholt, Hans
1977-01-01
Cyclic tests (Bauschinger tests) were conducted at 77 K and at room temperature on the fibre-reinforced material of single crystal Cu with long W-fibres of diameter 20 mum and volume fractions up to 4%. These tests enabled two important contributions to the total strength of the unrelaxed materia...
Large deformations of a soft porous material
MacMinn, Christopher W; Wettlaufer, John S
2015-01-01
Compressing a porous material will decrease the volume of pore space, driving fluid out. Similarly, injecting fluid into a porous material can drive mechanical deformation, distorting the solid skeleton. This poromechanical coupling has applications ranging from cell and tissue mechanics to geomechanics and hydrogeology. The classical theory of linear poroelasticity captures this coupling by combining Darcy's law with linear elasticity and then further linearizing in the strain. This is a good model for very small deformations, but it becomes increasingly inappropriate as deformations grow larger, and moderate to large deformations are common in the context of phenomena such as swelling or damage, or for materials that are extremely soft. Here, we first review a rigorous Eulerian framework for large-deformation poromechanics. We then compare the predictions of linear poroelasticity with those of fully nonlinear poromechanics in the context of two uniaxial model problems: Fluid outflow driven by an applied mec...
Li, Jianying; Li, Haiyan; Fok, Alex S L; Watts, David C
2012-09-01
The aim of this study was to numerically evaluate the effects of filler contents and resin properties on the material properties of dental composites utilizing realistic 3D micromechanical finite element models. 3D micromechanical finite element models of dental composites containing irregular fillers with non-uniform sizes were created based on a large-scale, surrogate mixture fabricated from irregularly shaped stones and casting resin. The surrogate mixture was first scanned with a micro-CT scanner, and the images reassembled to produce a 3D finite element model. Different filler fractions were achieved by adjusting the matrix volume while keeping the fillers unchanged. Polymerization shrinkage, Young's modulus, Poisson's ratio and viscosity of the model composites were predicted using the finite element models, and their dependence on the filler fraction and material properties of the resin matrix were considered. Comparison of the numerical predictions with available experimental data and analytical models from the literature was performed. Increased filler fraction resulted in lower material shrinkage, higher Young's modulus, lower Poisson's ratio and higher viscosity in the composite. Predicted shrinkage and Young's modulus agreed well with the experimental data and analytical predictions. The McGee-McCullough model best fit the shrinkage and Young's modulus predicted by the finite element method. However, a new parameter, used as the exponent of the filler fraction, had to be introduced to the McGee-McCullough model to better match the predicted viscosity and Poisson's ratio with those from the finite element analysis. Realistic micro-structural finite element models were successfully applied to study the effects of filler fraction and matrix properties on a wide range of mechanical properties of dental composites with irregular fillers. The results can be used to direct the design of such materials to achieve the desired mechanical properties. Published by
Fiorentino, Eve-Agnès; Moura, Marcel; Jørgen Måløy, Knut; Toussaint, Renaud; Schäfer, Gerhard
2015-04-01
The capillary pressure saturation relationship is a key element in the resolution of hydrological problems that involve the closure partial-flow Darcy relations. This relationship is derived empirically, and the two typical curve fitting equations that are used to describe it are the Brooks-Corey and Van Genüchten models. The question we tackle is the influence of the boundary conditions of the experimental set-up on the measurement of this retention curve, resulting in a non physical pressure-saturation curve in porous media, due the "end effects" phenomenon. In this study we analyze the drainage of a two-phase flow from a quasi 2D random porous medium, and compare it to simulations arising from an invasion percolation algorithm. The medium is initially saturated with a viscous fluid, and as the pressure difference is gradually increased, air penetrates from an open inlet, thus displacing the fluid which leaves the system from the outlet in the opposing side. In the initial stage, the liquid-air interface evolves from a planar front to the fractal structure characteristic of slow drainage processes, giving the initial downward curvature. In the final stage, air spreads all along the filter, and must reach narrower pores, calling for an increase of the pressure difference, reflected by the final upward curvature. Measuring the pressure-saturation (P-S) law in subwindows located at the inlet, outlet and middle of the network, we emphasize that these boundary effects are the fact of a fraction of pores that is likely to be negligible for high scale systems. We analyze the value of the air saturation at the end of the experiment for a series of simulations with different sample geometries : we observe that this saturation converges to a plateau when the distance between the inlet ant outlet increases, and that the value of this plateau is determined by the distance between the lateral walls. We finally show that the pressure difference between the two phases
Activation of porous MOF materials
Hupp, Joseph T; Farha, Omar K
2013-04-23
A method for the treatment of solvent-containing MOF material to increase its internal surface area involves introducing a liquid into the MOF in which liquid the solvent is miscible, subjecting the MOF to supercritical conditions for a time to form supercritical fluid, and releasing the supercritical conditions to remove the supercritical fluid from the MOF. Prior to introducing the liquid into the MOF, occluded reaction solvent, such as DEF or DMF, in the MOF can be exchanged for the miscible solvent.
Cationic polymers and porous materials
Han, Yu
2017-04-27
According to one or more embodiments, cationic polymers may be produced which include one or more monomers containing cations. Such cationic polymers may be utilized as structure directing agents to form mesoporous zeolites. The mesoporous zeolites may include micropores as well as mesopores, and may have a surface area of greater than 350 m2/g and a pore volume of greater than 0.3 cm3/g. Also described are core/shell zeolites, where at least the shell portion includes a mesoporous zeolite material.
Structure and Stability of Deflagrations in Porous Energetic Materials
Energy Technology Data Exchange (ETDEWEB)
stephen B. Margolis; Forman A. Williams
1999-03-01
Theoretical two-phase-flow analyses have recently been developed to describe the structure and stability of multi-phase deflagrations in porous energetic materials, in both confined and unconfined geometries. The results of these studies are reviewed, with an emphasis on the fundamental differences that emerge with respect to the two types of geometries. In particular, pressure gradients are usually negligible in unconfined systems, whereas the confined problem is generally characterized by a significant gas-phase pressure difference, or overpressure, between the burned and unburned regions. The latter leads to a strong convective influence on the burning rate arising from the pressure-driven permeation of hot gases into the solid/gas region and the consequent preheating of the unburned material. It is also shown how asymptotic models that are suitable for analyzing stability may be derived based on the largeness of an overall activation-energy parameter. From an analysis of such models, it is shown that the effects of porosity and two-phase flow are generally destabilizing, suggesting that degraded propellants, which exhibit greater porosity than their pristine counterparts, may be more readily subject to combustion instability and nonsteady deflagration.
Saad, Bilal Mohammed
2014-01-01
We study the convergence of a combined finite volume nonconforming finite element scheme on general meshes for a partially miscible two-phase flow model in anisotropic porous media. This model includes capillary effects and exchange between the phase. The diffusion term,which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh. The relative permeability of each phase is decentred according the sign of the velocity at the dual interface. The convergence of the scheme is proved thanks to an estimate on the two pressures which allows to show estimates on the discrete time and compactness results in the case of degenerate relative permeabilities. A key point in the scheme is to use particular averaging formula for the dissolution function arising in the diffusion term. We show also a simulation of CO
FACADE SYSTEM MADE OF POROUS MATERIALS
Directory of Open Access Journals (Sweden)
Zhukov Aleksey Dmitrievich
2012-10-01
Full Text Available The proposed multi-component façade system is made of porous concretes employed both as bearing structures and for heat insulation and fireproofing purposes. The authors also provide their recommendations in respect of the mounting of the proposed façade system. The façade system considered in the article is composed of wall foam concrete blocks reinforced by basalt fibers (bearing elements of the structure, cellular concrete polystyrene (thermal insulation, and porous concrete (fireproofing and thermal insulation. Retained shuttering (in the fireproofing sections represents chrysolite cement sheets attached to the structures composed of glass-fiber plastic elements. The application of insulating porous concrete as a fireproofing material is based on the principle of adjustable stress-strained states of materials in the environment of variable pressure. This technology was developed at Moscow State University of Civil Engineering, and it was initially designated for the manufacturing of tailor-made products. The above concrete is also designated for retained shuttering and modified cavity masonry walls. Porous concrete that expands inside the fireproofing cavity ensures a tight contact both with the basic material and thermal insulation plates. The use of materials of the same origin (Portland cement means the formation of strong transition zones connecting the system components in the course of its hardening and further operation. The results of the thermotechnical calculation demonstrate that the thermal resistance registered on the surface of the wall that is 3 meters high (that has a 0.4 m fireproofing cavity is equal to 3.98 sq. m. C/Wt. The value of the coefficient of thermotechnical heterogeneity (r is equal to 0.86 with account for the thickness and thermal conductivity of point and linear elements. If the thermotechnical heterogeneity is taken into consideration, the thermal resistance of the proposed wall is equal to 3.42 m2 С/Wt.
Lee, Sukbin
In studying microstructure-property relationships, it is of great interest to reveal the effect of individual microstructural parameters on the properties of the materials in all three dimensions. However, it is not easy to obtain experimentally samples in which the individual microstructural features are independently controlled. Even though one can prepare such samples, conventional materials characterization is based on the data obtained from two-dimensional plane sections of the samples. Since many problems related to the properties of materials are three-dimensional in nature, conventional two-dimensional characterization is not always sufficient to describe the microstructure quantitatively. Also, many property experiments are destructive and therefore one needs to repeat the process many times to map the properties as a function of the microstructural parameters. Considerable effort has been made to reconstruct three-dimensional microstructures using serial sectioning in recent years in order to determine three-dimensional microstructural features of two-phase composite materials directly. While this approach yields three-dimensional data on the size, shape, and spatial correlation of particles, it demands difficult and time-consuming steps. Thus, numerical reconstruction or synthesis methods can contribute significantly to modeling three-dimensional microstructures, especially two-phase composite microstructures for this project. One objective of this project is to introduce a procedure for generating three-dimensional digital microstructures representing two-phase composite materials containing isotropically coarsened particles in the surrounding matrix phase. In order to achieve the goal, a three-dimensional, Q-state Monte Carlo Potts model of isotropic particle coarsening in a system with full wetting of particles by matrix is introduced to investigate the coarsening kinetics and microstructures associated with this process. By imposing the condition of
Temperature pattern dynamics in shocked porous materials
Institute of Scientific and Technical Information of China (English)
无
2010-01-01
The physical fields in porous materials under strong shock wave reaction are very complicated. We simulate such systems using the grain contact material point method. The complex temperature fields in the material are treated with the morphological characterization. To compare the structures and evolution of characteristic regimes under various temperature thresholds, we introduce two concepts, structure similarity and process similarity. It is found that the temperature pattern dynamics may show high similarity under various conditions. Within the same material, the structures and evolution of high-temperature regimes may show high similarity if the shock strength and temperature threshold are chosen appropriately. For process similarity in materials with high porosity, the required temperature threshold increases parabolically with the impact velocity. When the porosity becomes lower, the increasing rate becomes higher. For process similarity in different materials, the required temperature threshold and the porosity follow a power-law relationship in some range.
Review on Fractal Analysis of Porous Metal Materials
Directory of Open Access Journals (Sweden)
J. Z. Wang
2015-01-01
Full Text Available Porous metal materials are multifunctional lightweight materials and have been used widely in industry. The structural and functional characters of porous metal materials depend on the pore structure which can be described effectively by the fractal theory. This paper reviews the major achievements on fractal analysis of pore structure of porous metal materials made by State Key Laboratory of Porous Metal Materials, China, over the past few years. These include (i designing and developing a set of novel fractal analytical software of porous metal materials, (ii the influence of material characterization and image processing method on the fractal dimension, and (iii the relationship between the material performance and the fractal dimension. Finally, the outlooks of fractal theory applied in porous metal materials are discussed.
Hubert, Olivier; Lazreg, Said
2017-02-01
A growing interest of automotive industry in the use of high performance steels is observed. These materials are obtained thanks to complex manufacturing processes whose parameters fluctuations lead to strong variations of microstructure and mechanical properties. The on-line magnetic non-destructive monitoring is a relevant response to this problem but it requires fast models sensitive to different parameters of the forming process. The plastic deformation is one of these important parameters. Indeed, ferromagnetic materials are known to be sensitive to stress application and especially to plastic strains. In this paper, a macroscopic approach using the kinematic hardening is proposed to model this behavior, considering a plastic strained material as a two phase system. Relationship between kinematic hardening and residual stress is defined in this framework. Since stress fields are multiaxial, an uniaxial equivalent stress is calculated and introduced inside the so-called magneto-mechanical multidomain modeling to represent the effect of plastic strain. The modeling approach is complemented by many experiments involving magnetic and magnetostrictive measurements. They are carried out with or without applied stress, using a dual-phase steel deformed at different levels. The main interest of this material is that the mechanically hard phase, soft phase and the kinematic hardening can be clearly identified thanks to simple experiments. It is shown how this model can be extended to single phase materials.
Moura, Marcel; Fiorentino, Eve-Agnès; Jørgen Måløy, Knut; Toussaint, Renaud; Schäfer, Gerhard
2015-04-01
We have performed two-phase flow experiments to analyze the drainage from a quasi-2D random porous medium. The medium is transparent, which allows for the visualization of the invasion pattern during the flow and is initially fully saturated with a viscous fluid (a dyed glycerol-water mix). As the pressure in the fluid is gradually reduced, air penetrates from an open inlet, thus displacing the fluid which leaves the system from the outlet in the opposite side. A feedback mechanism was devised to control the experiment: the capillary pressure (difference in pressure between the non-wetting and wetting phases) is continuously increased to be just above the threshold value necessary to drive the invasion process. This mechanism is intended to keep the invasion process slow, in the so-called capillary regime, where capillary forces dominate the dynamics. Pressure measurements and pictures of the flow are recorded and the pressure-saturation relationship is computed. The effects of the boundary conditions to this quantity are verified experimentally by repeatedly performing the analysis using porous media of different sizes. We show that some features of the pressure-saturation curve are strongly affected by boundary effects. The invasion close to the inlet and outlet of the model are particularly influenced by the boundaries and this is reflected in the phases of pressure building up in the pressure-saturation curves, in the beginning and end of the invasion process. Conversely, at the central part of the model (away from the boundaries), the invasion process happens at an essentially constant capillary pressure, which is reflected as a plateau in the pressure-saturation curve. Additionally, the use of a high-resolution camera allows us to analyze the images down to the pore scale. We can directly obtain a distribution of pore-throat sizes in the model (and their associated capillary pressure thresholds) and divide it into distributions of invaded / non-invaded pores
Salama, Amgad
2012-06-17
The flow of two immiscible fluids in porous media is ubiquitous particularly in petroleum exploration and extraction. The displacement of one fluid by another immiscible with it represents a very important aspect in what is called enhanced oil recovery. Another example is related to the long-term sequestration of carbon dioxide, CO2 , in deep geologic formations. In this technique, supercritical CO2 is introduced into deep saline aquifer where it displaces the hosting fluid. Furthermore, very important classes of contaminants that are very slightly soluble in water and represent a huge concern if they get introduced to groundwater could basically be assumed immiscible. These are called light non-aqueous phase liquids (LNAPL) and dense non-aqueous phase liquids (DNAPL). All these applications necessitate that efficient algorithms be developed for the numerical solution of these problems. In this work we introduce the use of shifting matrices to numerically solving the problem of two-phase immiscible flows in the subsurface. We implement the cell-center finite difference method which discretizes the governing set of partial differential equations in conservative manner. Unlike traditional solution methodologies, which are based on performing the discretization on a generic cell and solve for all the cells within a loop, in this technique, the cell center information for all the cells are obtained all at once without loops using matrix oriented operations. This technique is significantly faster than the traditional looping algorithms, particularly for larger systems when coding using languages that require repeating interpretation each time a loop is called like Mat Lab, Python and the like. We apply this technique to the transport of LNAPL and DNAPL into a rectangular domain.
Joekar-Niasar, Vahid
2012-02-23
The capillary pressure-saturation (P c-S w) relationship is one of the central constitutive relationships used in two-phase flow simulations. There are two major concerns regarding this relation. These concerns are partially studied in a hypothetical porous medium using a dynamic pore-network model called DYPOSIT, which has been employed and extended for this study: (a) P c-S w relationship is measured empirically under equilibrium conditions. It is then used in Darcy-based simulations for all dynamic conditions. This is only valid if there is a guarantee that this relationship is unique for a given flow process (drainage or imbibition) independent of dynamic conditions; (b) It is also known that P c-S w relationship is flow process dependent. Depending on drainage and imbibition, different curves can be achieved, which are referred to as "hysteresis". A thermodynamically derived theory (Hassanizadeh and Gray, Water Resour Res 29: 3389-3904, 1993a) suggests that, by introducing a new state variable, called the specific interfacial area (a nw, defined as the ratio of fluid-fluid interfacial area to the total volume of the domain), it is possible to define a unique relation between capillary pressure, saturation, and interfacial area. This study investigates these two aspects of capillary pressure-saturation relationship using a dynamic pore-network model. The simulation results imply that P c-S w relation not only depends on flow process (drainage and imbibition) but also on dynamic conditions for a given flow process. Moreover, this study attempts to obtain the first preliminary insights into the global functionality of capillary pressure-saturation-interfacial area relationship under equilibrium and non-equilibrium conditions and the uniqueness of P c-S w-a nw relationship. © 2012 The Author(s).
Directory of Open Access Journals (Sweden)
S Gowri
2015-01-01
Full Text Available Background and Rationale: The precise fit of prosthesis depends on the impression materials and the technique used. Addition silicone impression materials being the user-friendly material are used in monophase and two-phase techniques. Considering the paucity of data on the effectiveness of intraoral delivery tip (IODT on void, tear and bubble formation using monophase impression technique in stock tray and two-phase impression technique in custom tray the present study was initiated. Materials and Methods: A total of 50 patients requiring single complete veneer crowns were enrolled. Monophase and two-phase impressions with and without IODT were made. Evaluation of the impression were made for tears, voids, and bubbles and alpha, beta, delta scores were given. Results: A significant reduction in the total number of voids was observed with two-phase technique either with or without IODT. No significant differences were observed in the proportion of overall evaluation into alpha, beta and delta between monophase and two-phase with and without IODT. No significant association was seen in the overall evaluation between the two groups (monophase and two-phase as compared using Chi-square test for independency and a trend in association between overall evaluation as tested using Chi-square for linear trend analysis. Conclusion: Two-phase impression technique with the use of IODT produced decreased number of voids.
Imparting amphiphobicity on single-crystalline porous materials
Sun, Qi; He, Hongming; Gao, Wen-Yang; Aguila, Briana; Wojtas, Lukasz; Dai, Zhifeng; Li, Jixue; Chen, Yu-Sheng; Xiao, Feng-Shou; Ma, Shengqian
2016-01-01
The sophisticated control of surface wettability for target-specific applications has attracted widespread interest for use in a plethora of applications. Despite the recent advances in modification of non-porous materials, surface wettability control of porous materials, particularly single crystalline, remains undeveloped. Here we contribute a general method to impart amphiphobicity on single-crystalline porous materials as demonstrated by chemically coating the exterior of metal-organic fr...
Vibro-acoustics of porous materials - waveguide modeling approach
DEFF Research Database (Denmark)
Darula, Radoslav; Sorokin, Sergey V.
2016-01-01
The porous material is considered as a compound multi-layered waveguide (i.e. a fluid layer surrounded with elastic layers) with traction free boundary conditions. The attenuation of the vibro-acoustic waves in such a material is assessed. This approach is compared with a conventional Biot's model...... in porous materials....
Determination of connectivity in porous materials.
Caccianotti, L; Lucchelli, E; Ramello, S; Spanò, G
2012-12-01
A method of practical use was set up to determine the connectivity in a porous material, modelling the physical system as a lattice, whose coordination number is assumed to be an index of connectivity itself. This task was approached through the theory of percolation and input data were provided by two different experimental techniques, that is, adsorption/desorption of nitrogen and mercury porosimetry. The overall procedure is based on the calculation of probability f(P) of occupation of the porous channels and of probability F(P) of percolation. In the framework of the above--mentioned lattice model, the average coordination number Z is calculated through the best fitting of a universal curve to the values found for F(P) and f(P), adopting as fitting parameter the ratio L between the characteristic linear dimension of the whole lattice and the characteristic linear dimension of each of its cells. The procedure described was implemented through a numerical code and applied to three commercial alumina. A simple empirical relationship was found between Z and the percolation threshold, showing an excellent coefficient of statistical correlation. The three products proved different in connectivity, allowing subtle distinctions from each other, despite their hysteresis cycles in the adsorption/desorption process appeared quite similar from a qualitative standpoint.
Large Deformations of a Soft Porous Material
MacMinn, Christopher W.; Dufresne, Eric R.; Wettlaufer, John S.
2016-04-01
Compressing a porous material will decrease the volume of the pore space, driving fluid out. Similarly, injecting fluid into a porous material can expand the pore space, distorting the solid skeleton. This poromechanical coupling has applications ranging from cell and tissue mechanics to geomechanics and hydrogeology. The classical theory of linear poroelasticity captures this coupling by combining Darcy's law with Terzaghi's effective stress and linear elasticity in a linearized kinematic framework. Linear poroelasticity is a good model for very small deformations, but it becomes increasingly inappropriate for moderate to large deformations, which are common in the context of phenomena such as swelling and damage, and for soft materials such as gels and tissues. The well-known theory of large-deformation poroelasticity combines Darcy's law with Terzaghi's effective stress and nonlinear elasticity in a rigorous kinematic framework. This theory has been used extensively in biomechanics to model large elastic deformations in soft tissues and in geomechanics to model large elastoplastic deformations in soils. Here, we first provide an overview and discussion of this theory with an emphasis on the physics of poromechanical coupling. We present the large-deformation theory in an Eulerian framework to minimize the mathematical complexity, and we show how this nonlinear theory simplifies to linear poroelasticity under the assumption of small strain. We then compare the predictions of linear poroelasticity with those of large-deformation poroelasticity in the context of two uniaxial model problems: fluid outflow driven by an applied mechanical load (the consolidation problem) and compression driven by a steady fluid throughflow. We explore the steady and dynamical errors associated with the linear model in both situations, as well as the impact of introducing a deformation-dependent permeability. We show that the error in linear poroelasticity is due primarily to kinematic
Preparation and Gas Adsorption of Porous Materials from Molecular Precursors
DEFF Research Database (Denmark)
Hu, Xinming
ABSTRACT This thesis deals with the synthesis of porous materials and their applications in gas adsorption. The thesis consists of eight chapters as follows: The first two chapters provide a brief introduction to porous materials and gas adsorption. Chapter 1 gives an overview of construction...... and characteristics of various porous materials, including activated carbons, zeolites, metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and organic porous polymers (POPs). Chapter 2 briefly introduces gas adsorption theory, such as physical and chemical adsorption, adsorption isotherms...
SPUTTERING FROM A POROUS MATERIAL BY PENETRATING IONS
Energy Technology Data Exchange (ETDEWEB)
Rodriguez-Nieva, J. F. [Instituto Balseiro, Universidad Nacional de Cuyo, 8400 Bariloche (Argentina); Bringa, E. M. [CONICET and Instituto de Ciencias Basicas, Universidad Nacional de Cuyo, 5500 Mendoza (Argentina); Cassidy, T. A. [CalTech/JPL, Pasadena, CA 91109 (United States); Johnson, R. E.; Fama, M.; Baragiola, R. A. [Laboratory for Atomic and Surface Physics, University of Virginia, Charlottesville, VA 22903 (United States); Caro, A. [Los Alamos National Laboratory, Los Alamos, NM 94551 (United States); Loeffler, M. J. [NASA Goddard Space Flight Center, Astrochemistry Branch, Code 691, Greenbelt, MD 20771 (United States); Farkas, D. [Department of Materials Sciences, Virginia Tech, Blacksburg, VA 24061 (United States)
2011-12-10
Porous materials are ubiquitous in the universe and weathering of porous surfaces plays an important role in the evolution of planetary and interstellar materials. Sputtering of porous solids in particular can influence atmosphere formation, surface reflectivity, and the production of the ambient gas around materials in space. Several previous studies and models have shown a large reduction in the sputtering of a porous solid compared to the sputtering of the non-porous solid. Using molecular dynamics simulations we study the sputtering of a nanoporous solid with 55% of the solid density. We calculate the electronic sputtering induced by a fast, penetrating ion, using a thermal spike representation of the deposited energy. We find that sputtering for this porous solid is, surprisingly, the same as that for a full-density solid, even though the sticking coefficient is high.
Sputtering from a Porous Material by Penetrating Ions
Rodriguez-Nieva, J. F.; Bringa, E. M.; Cassidy, T. A.; Johnson, R. E.; Caro, A.; Fama, M.; Loeffler, M. J.; Baragiola, R. A.; Farkas, D.
2011-12-01
Porous materials are ubiquitous in the universe and weathering of porous surfaces plays an important role in the evolution of planetary and interstellar materials. Sputtering of porous solids in particular can influence atmosphere formation, surface reflectivity, and the production of the ambient gas around materials in space. Several previous studies and models have shown a large reduction in the sputtering of a porous solid compared to the sputtering of the non-porous solid. Using molecular dynamics simulations we study the sputtering of a nanoporous solid with 55% of the solid density. We calculate the electronic sputtering induced by a fast, penetrating ion, using a thermal spike representation of the deposited energy. We find that sputtering for this porous solid is, surprisingly, the same as that for a full-density solid, even though the sticking coefficient is high.
Imparting amphiphobicity on single-crystalline porous materials
Sun, Qi; He, Hongming; Gao, Wen-Yang; Aguila, Briana; Wojtas, Lukasz; Dai, Zhifeng; Li, Jixue; Chen, Yu-Sheng; Xiao, Feng-Shou; Ma, Shengqian
2016-10-01
The sophisticated control of surface wettability for target-specific applications has attracted widespread interest for use in a plethora of applications. Despite the recent advances in modification of non-porous materials, surface wettability control of porous materials, particularly single crystalline, remains undeveloped. Here we contribute a general method to impart amphiphobicity on single-crystalline porous materials as demonstrated by chemically coating the exterior of metal-organic framework (MOF) crystals with an amphiphobic surface. As amphiphobic porous materials, the resultant MOF crystals exhibit both superhydrophobicity and oleophobicity in addition to retaining high crystallinity and intact porosity. The chemical shielding effect resulting from the amphiphobicity of the MOFs is illustrated by their performances in water/organic vapour adsorption, as well as long-term ultrastability under highly humidified CO2 environments and exceptional chemical stability in acid/base aqueous solutions. Our work thereby pioneers a perspective to protect crystalline porous materials under various chemical environments for numerous applications.
Fabricating porous materials using interpenetrating inorganic-organic composite gels
Seo, Dong-Kyun; Volosin, Alex
2016-06-14
Porous materials are fabricated using interpenetrating inorganic-organic composite gels. A mixture or precursor solution including an inorganic gel precursor, an organic polymer gel precursor, and a solvent is treated to form an inorganic wet gel including the organic polymer gel precursor and the solvent. The inorganic wet gel is then treated to form a composite wet gel including an organic polymer network in the body of the inorganic wet gel, producing an interpenetrating inorganic-organic composite gel. The composite wet gel is dried to form a composite material including the organic polymer network and an inorganic network component. The composite material can be treated further to form a porous composite material, a porous polymer or polymer composite, a porous metal oxide, and other porous materials.
Turbulent Impinging Jets into Porous Materials
de Lemos, Marcelo J S
2012-01-01
This short book deals with the mathematical modeling of jets impinging porous media. It starts with a short introduction to models describing turbulences in porous media as well as turbulent heat transfer. In its main part, the book presents the heat transfer of impinging jets using a local and a non-local thermal equilibrium approach.
A New Hugoniot Equation of State for Shocked Porous Materials
Institute of Scientific and Technical Information of China (English)
耿华运; 谭华; 吴强
2002-01-01
A thermodynamic equation of state (EOS) is derived to be appropriate for investigating the thermodynamic variations along isobaric paths to predict the compression behaviour of porous materials. This EOS model is tested on porous iron, copper, lead and tungsten with different initial densities. The calculated temperature and Hugoniot are in good agreement with the corresponding experimental and theoretical data published previously. It is interesting that this model can satisfactorily predict the shock behaviour of porous materials over a wide range of porosity and pressure.
Transient Infrared Measurement of Laser Absorption Properties of Porous Materials
Marynowicz Andrzej
2016-01-01
The infrared thermography measurements of porous building materials have become more frequent in recent years. Many accompanying techniques for the thermal field generation have been developed, including one based on laser radiation. This work presents a simple optimization technique for estimation of the laser beam absorption for selected porous building materials, namely clinker brick and cement mortar. The transient temperature measurements were performed with the use of infrared camera du...
Combustion of porous energetic materials in the merged-flame regime
Energy Technology Data Exchange (ETDEWEB)
Margolis, S.B. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility; Williams, F.A.; Telengator, A.M. [Univ. of California, San Diego, La Jolla, CA (United States). Dept. of Applied Mechanics and Engineering Sciences
1996-02-01
The structure and burning rate of an unconfined deflagration propagating through a porous energetic material is analyzed in the limit of merged condensed and gas-phase reaction zones. A global two-step reaction mechanism, applicable to certain types of degraded nitramine propellants and consisting of sequential condensed and gaseous steps, is postulated. Taking into account important effects due to multiphase flow and exploiting the limit of large activation energies, a theoretical analysis based on activation energy asymptotics leads to explicit formulas for the deflagration velocity in a specifically identified regime that is consistent with the merged-flame assumption. The results clearly indicate the influences of two-phase flow and the multiphase, multi-step chemistry on the deflagration structure and the burning rate, and define conditions that support the intrusion of the primary gas flame into the two-phase condensed decomposition region at the propellant surface.
Measurement Methods of Micro-structure of Porous Materials
Directory of Open Access Journals (Sweden)
Xingli Jiao
2015-07-01
Full Text Available Porous media is used in many areas of applied science and engineering and its characterization of porosity and micro-structure is very important, therefore, it is very necessary to know the measurements of pore structure of porous materials. In this study, some traditional methods that are used to measure micro-structure of porous material were briefly introduced in this study, including mercury porosimetry method, gas adsorption method, electronic microscope method, small angle X-ray scattering method and bubbling test method, followed by some emerging technology, including the combination of different methods, medical imaging technology and image processing software. Meanwhile merits and drawbacks as well as the existing problems of methods mentioned were analyzed and application range was described. At last, the developing trends and prospect of newly emerging methods, which is used to measure micro-structure of porous material, are also described briefly.
Preparation and Gas Adsorption of Porous Materials from Molecular Precursors
DEFF Research Database (Denmark)
Hu, Xinming
ABSTRACT This thesis deals with the synthesis of porous materials and their applications in gas adsorption. The thesis consists of eight chapters as follows: The first two chapters provide a brief introduction to porous materials and gas adsorption. Chapter 1 gives an overview of construction...... and characteristics of various porous materials, including activated carbons, zeolites, metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and organic porous polymers (POPs). Chapter 2 briefly introduces gas adsorption theory, such as physical and chemical adsorption, adsorption isotherms...... rise to significant red-shift of absorption/emission and reduction of fluorescence lifetime and quantum yield Transition-metal-catalyzed and organolithium-mediated reactions provide polymers with only macroporous interparticle voids and thus very low surface areas (4−51 m2 g−1). Attempts have been also...
Noguchi, Yuki; Yamamoto, Takashi; Yamada, Takayuki; Izui, Kazuhiro; Nishiwaki, Shinji
2017-09-01
This papers proposes a level set-based topology optimization method for the simultaneous design of acoustic and structural material distributions. In this study, we develop a two-phase material model that is a mixture of an elastic material and acoustic medium, to represent an elastic structure and an acoustic cavity by controlling a volume fraction parameter. In the proposed model, boundary conditions at the two-phase material boundaries are satisfied naturally, avoiding the need to express these boundaries explicitly. We formulate a topology optimization problem to minimize the sound pressure level using this two-phase material model and a level set-based method that obtains topologies free from grayscales. The topological derivative of the objective functional is approximately derived using a variational approach and the adjoint variable method and is utilized to update the level set function via a time evolutionary reaction-diffusion equation. Several numerical examples present optimal acoustic and structural topologies that minimize the sound pressure generated from a vibrating elastic structure.
On strength of porous material - simple systems and densified systems
DEFF Research Database (Denmark)
Nielsen, Lauge Fuglsang
1997-01-01
The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus Of Rupture) of materials have been established in order to control...... quality without damaging or destroying the material or the building component considered. The efficiency of MOE-MOR relations for this purpose depends very much on the homogeneity of porous material considered. For building materials like wood and concrete of normal or lower quality with a number...... of irregularities only scattered MOE-MOR relations (clouds) can be established from which no really reliable results can be read.For homogeneously produced porous materials, however, like modern ceramics and high performance concretes MOE-MOR relations can be presented which are reliable. The present paper...
On strength of porous material - simple systems and densified systems
DEFF Research Database (Denmark)
Nielsen, Lauge Fuglsang
1997-01-01
quality without damaging or destroying the material or the building component considered. The efficiency of MOE-MOR relations for this purpose depends very much on the homogeneity of porous material considered. For building materials like wood and concrete of normal or lower quality with a number......The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus Of Rupture) of materials have been established in order to control...... of irregularities only scattered MOE-MOR relations (clouds) can be established from which no really reliable results can be read.For homogeneously produced porous materials, however, like modern ceramics and high performance concretes MOE-MOR relations can be presented which are reliable. The present paper...
Porous materials produced from incineration ash using thermal plasma technology.
Yang, Sheng-Fu; Chiu, Wen-Tung; Wang, To-Mai; Chen, Ching-Ting; Tzeng, Chin-Ching
2014-06-01
This study presents a novel thermal plasma melting technique for neutralizing and recycling municipal solid waste incinerator (MSWI) ash residues. MSWI ash residues were converted into water-quenched vitrified slag using plasma vitrification, which is environmentally benign. Slag is adopted as a raw material in producing porous materials for architectural and decorative applications, eliminating the problem of its disposal. Porous materials are produced using water-quenched vitrified slag with Portland cement and foaming agent. The true density, bulk density, porosity and water absorption ratio of the foamed specimens are studied here by varying the size of the slag particles, the water-to-solid ratio, and the ratio of the weights of the core materials, including the water-quenched vitrified slag and cement. The thermal conductivity and flexural strength of porous panels are also determined. The experimental results show the bulk density and the porosity of the porous materials are 0.9-1.2 g cm(-3) and 50-60%, respectively, and the pore structure has a closed form. The thermal conductivity of the porous material is 0.1946 W m(-1) K(-1). Therefore, the slag composite materials are lightweight and thermal insulators having considerable potential for building applications. Copyright © 2013 Elsevier Ltd. All rights reserved.
Porous Materials from Thermally Activated Kaolinite: Preparation, Characterization and Application
Directory of Open Access Journals (Sweden)
Jun Luo
2017-06-01
Full Text Available In the present study, porous alumina/silica materials were prepared by selective leaching of silicon/aluminum constituents from thermal-activated kaolinite in inorganic acid or alkali liquor. The correlations between the characteristics of the prepared porous materials and the dissolution properties of activated kaolinite were also investigated. The results show that the specific surface area (SSA of porous alumina/silica increases with silica/alumina dissolution, but without marked change of the BJH pore size. Furthermore, change in pore volume is more dependent on activation temperature. The porous alumina and silica obtained from alkali leaching of kaolinite activated at 1150 °C for 15 min and acid leaching of kaolinite activated at 850 °C for 15 min are mesoporous, with SSAs, BJH pore sizes and pore volumes of 55.8 m2/g and 280.3 m2/g, 6.06 nm and 3.06 nm, 0.1455 mL/g and 0.1945 mL/g, respectively. According to the adsorption tests, porous alumina has superior adsorption capacities for Cu2+, Pb2+ and Cd2+ compared with porous silica and activated carbon. The maximum capacities of porous alumina for Cu2+, Pb2+ and Cd2+ are 134 mg/g, 183 mg/g and 195 mg/g, respectively, at 30 °C.
Modelling and Microstructural Characterization of Sintered Metallic Porous Materials
Directory of Open Access Journals (Sweden)
Wojciech Depczynski
2016-07-01
Full Text Available This paper presents selected characteristics of the metallic porous materials produced by the sintering of metal powders. The authors focus on materials produced from the iron powder (Fe of ASC 100.29 and Distaloy SE. ASC 100.29 is formed by atomization and has a characteristic morphology. It consists of spherical particles of different sizes forming agglomerates. Distaloy SE is also based on the sponge-iron. The porous material is prepared using the patented method of sintering the mixture of iron powder ASC 100.29, Fe(III oxide, Distaloy SE and Fe(III oxide in the reducing atmosphere of dissociated ammonia. As a result, the materials with open pores of micrometer sizes are obtained. The pores are formed between iron particles bonded by diffusion bridges. The modelling of porous materials containing diffusion bridges that allows for three-dimensional (3D imaging is presented.
Leclaire, Sébastien; Parmigiani, Andrea; Malaspinas, Orestis; Chopard, Bastien; Latt, Jonas
2017-03-01
This article presents a three-dimensional numerical framework for the simulation of fluid-fluid immiscible compounds in complex geometries, based on the multiple-relaxation-time lattice Boltzmann method to model the fluid dynamics and the color-gradient approach to model multicomponent flow interaction. New lattice weights for the lattices D3Q15, D3Q19, and D3Q27 that improve the Galilean invariance of the color-gradient model as well as for modeling the interfacial tension are derived and provided in the Appendix. The presented method proposes in particular an approach to model the interaction between the fluid compound and the solid, and to maintain a precise contact angle between the two-component interface and the wall. Contrarily to previous approaches proposed in the literature, this method yields accurate solutions even in complex geometries and does not suffer from numerical artifacts like nonphysical mass transfer along the solid wall, which is crucial for modeling imbibition-type problems. The article also proposes an approach to model inflow and outflow boundaries with the color-gradient method by generalizing the regularized boundary conditions. The numerical framework is first validated for three-dimensional (3D) stationary state (Jurin's law) and time-dependent (Washburn's law and capillary waves) problems. Then, the usefulness of the method for practical problems of pore-scale flow imbibition and drainage in porous media is demonstrated. Through the simulation of nonwetting displacement in two-dimensional random porous media networks, we show that the model properly reproduces three main invasion regimes (stable displacement, capillary fingering, and viscous fingering) as well as the saturating zone transition between these regimes. Finally, the ability to simulate immiscible two-component flow imbibition and drainage is validated, with excellent results, by numerical simulations in a Berea sandstone, a frequently used benchmark case used in this
Stability of quasi-steady deflagrations in confined porous energetic materials
Energy Technology Data Exchange (ETDEWEB)
Alexander M. Telengator; Stephen B. Margolis; Forman A. Williams
2000-03-01
Previous analyses have shown that unconfined deflagrations propagating through both porous and nonporous energetic materials can exhibit a thermal/diffusive instability that corresponds to the onset of various oscillatory modes of combustion. For porous materials, two-phase-flow effects, associated with the motion of the gas products relative to the condensed material, play a significant role that can shift stability boundaries with respect to those associated with the nonporous problem. In the present work, additional significant effects are shown to be associated with confinement, which produces an overpressure in the burned-gas region that leads to reversal of the gas flow and hence partial permeation of the hot gases into the unburned porous material. This results in a superadiabatic effect that increases the combustion temperature and, consequently, the burning rate. Under the assumption of gas-phase quasi-steadiness, an asymptotic model is presented that facilitates a perturbation analysis of both the basic solution, corresponding to a steadily propagating planar combustion wave, and its stability. The neutral stability boundaries collapse to the previous results in the absence of confinement, but different trends arising from the presence of the gas-permeation layer are predicted for the confined problem. Whereas two-phase-flow effects are generally destabilizing in the unconfined geometry, the effects of increasing overpressure and hence combustion temperature associated with confinement are shown to be generally stabilizing with respect to thermal/diffusive instability, analogous to the effects of decreasing heat losses on combustion temperature and stability in single-phase deflagrations.
Energy Technology Data Exchange (ETDEWEB)
Artus, V.
2003-11-01
For two-phase flow in heterogeneous media, the emergence of different flow regimes at large-scale is driven by local interactions between the viscous coupling and the heterogeneity. In particular, when the viscosity ratio is favorable, viscous effects induce a transverse flow that stabilizes the front while flooding. However, most of recent stochastic models neglect the influence of the viscous coupling. We developed a stochastic model for the dynamics of the front, taking the viscous coupling into account. For stable cases, this model relates the statistical properties of the front to the statistical properties of the permeability field. For stable flow in stratified media, we show that the front is stationary by parts in the reservoir. These parts can be identified as large-scale hydrodynamic layers and separately coarsened in the large-scale simulation model. For flows with favorable viscosity ratios in isotropic reservoirs, we show that a stationary front occurs, in a statistical sense. For unfavorable viscosity ratios, the flow is driven by the development of viscous fingering. These different regimes lead to different large-scale saturation profiles that can be matched with a macro-dispersion equation, if the effective convective flux is modified to take into account stabilizing or destabilizing viscous effects. (author)
Institute of Scientific and Technical Information of China (English)
张新明; 刘家琦; 刘克安
2011-01-01
A single component, two-phase flow simulator is developed to investigate the behavior of isothermal twophase fluid flow in porous media. The simulator is based on the Lattice-Boltzmann method and the Shan-Chen multiphase model of non-ideal fluids that allow coexistence of two phases of a single substance. Some different idealized situations (phase separation, surface tension, contact angle, pipe flow, and fluid droplet motion, et al) )in which the results are already known from theory or laboratory measurements are reproduced, and the validity of the implementation for the physical two-phase flow in porous media is shown. Application of the method to fluid intrusion in porous media is discussed and shows the effect of wettability on the fluid flow. The capability of reproducing critical flooding phenomena ( formation of advancing wetting film, snap off in throats and vapor condensation in pore) under strong wettability conditions is also proved.%基于格子波尔兹曼方法(Lattice-Boltzmann Method,LBM)和Shan-Chen单组分多相流模型,用单组分两相流LBM方法对孔隙介质中等温汽液两相流流动特性进行了研究.通过理想状态下流体特性(相分离、表面张力计算、流固接触角、管道两相流以及变形液滴运动)的研究验证了LBM应用于孔隙介质两相流的可行性,并进一步研究了孔隙介质中润湿相入侵非润湿相的流动特性和固体润湿性对于流体流动的影响,再现了孔隙介质中流体流动的狭长薄膜形成、狭窄孔道流体卡断和非润湿性相聚集等现象.
Porous structures of natural materials and bionic design
Institute of Scientific and Technical Information of China (English)
无
2005-01-01
This investigation and morphology analysis of porous structure of some kinds of natural materials such as chicken eggshell, partridge eggshell, pig bone, and seeds of mung bean, soja, ginkgo, lotus seed, as well as the epidermis of apples, with SEM (Scanning Electronic Microscope) showed that natural structures' pores can be classified into uniform pores, gradient pores and multi pores from the viewpoint of the distribution variation of pore density, size and geometry. Furthermore, an optimal design of porous bearings was for the first time developed based on the gradient configuration of natural materials. The bionic design of porous structures is predicted to be widely developed and applied in the fields of materials and mechanical engineering in the future.
Scanziani, Alessio; Singh, Kamaljit; Blunt, Martin J; Guadagnini, Alberto
2017-02-08
Multiphase flow in porous media is strongly influenced by the wettability of the system, which affects the arrangement of the interfaces of different phases residing in the pores. We present a method for estimating the effective contact angle, which quantifies the wettability and controls the local capillary pressure within the complex pore space of natural rock samples, based on the physical constraint of constant curvature of the interface between two fluids. This algorithm is able to extract a large number of measurements from a single rock core, resulting in a characteristic distribution of effective in situ contact angle for the system, that is modelled as a truncated Gaussian probability density distribution. The method is first validated on synthetic images, where the exact angle is known analytically; then the results obtained from measurements within the pore space of rock samples imaged at a resolution of a few microns are compared to direct manual assessment. Finally the method is applied to X-ray micro computed tomography (micro-CT) scans of two Ketton cores after waterflooding, that display water-wet and mixed-wet behaviour. The resulting distribution of in situ contact angles is characterized in terms of a mixture of truncated Gaussian densities.
New approach for porous materials obtaining using centrifugal casting
Bălţătescu, O.; Axinte, M.; Barbu, G.; Manole, V.
2015-11-01
It has been presented different methods for obtaining porous materials, (mainly used for metallic foams) and highlighting a new technology developed in the Faculty of Materials science and engineering, of Iasi. Our technology for obtaining porous materials is called centrifugal casting for porous materials. This technology is included in the method number 8: co-pressing of a metal powder with a leachable powder being in the same time a newer approach in the porous materials field. This technology is currently in the developmental phase. Since now we made experiments on the metallic materials, aluminum alloys. The technology is briefly described in this paper. The obtained parts were used for making samples in order to characterize the properties of the materials. The cellular structure of metallic foams requires special precautions that must be taken in characterization and testing. In this paper we have characterized the samples structurally by its cell topology (open cells, closed cells), relative density, cell size and cell shape and anisotropy. Also it was used scanning electron microscopy (SEM) which is straightforward; the only necessary precaution is that relating to surface preparation.
Testing a model for the critical degree of saturation at freezing of porous building materials
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
1996-01-01
Frost resistance of porous materials can be characterized by the critical degree of saturation, SCR. An experimental determination of SCR is very laborious and therefore only seldom used when testing frost resistance. A theoretical model for prediction of SCR based on fracture mechanics and phase...... geometry of two-phase materials has been developed. The degradation is modelled as being caused by different eigenstrains of the pore phase and the solid phase when freezing, leading to stress concentrations and crack propagation. Calculations are based on porosity, pore size distribution, modulus...... of elasticity, tensile strength, amount of freezable water, thermal expansion coefficients and parameters characterizing the pore structure and its effect on strength, modulus of elasticity and volumetric expansion. For the present, the model assumes non air-entrained homogeneous materials subjected to freeze...
Transient Infrared Measurement of Laser Absorption Properties of Porous Materials
Directory of Open Access Journals (Sweden)
Marynowicz Andrzej
2016-06-01
Full Text Available The infrared thermography measurements of porous building materials have become more frequent in recent years. Many accompanying techniques for the thermal field generation have been developed, including one based on laser radiation. This work presents a simple optimization technique for estimation of the laser beam absorption for selected porous building materials, namely clinker brick and cement mortar. The transient temperature measurements were performed with the use of infrared camera during laser-induced heating-up of the samples’ surfaces. As the results, the absorbed fractions of the incident laser beam together with its shape parameter are reported.
Transient Infrared Measurement of Laser Absorption Properties of Porous Materials
Marynowicz, Andrzej
2016-06-01
The infrared thermography measurements of porous building materials have become more frequent in recent years. Many accompanying techniques for the thermal field generation have been developed, including one based on laser radiation. This work presents a simple optimization technique for estimation of the laser beam absorption for selected porous building materials, namely clinker brick and cement mortar. The transient temperature measurements were performed with the use of infrared camera during laser-induced heating-up of the samples' surfaces. As the results, the absorbed fractions of the incident laser beam together with its shape parameter are reported.
Bulk sound velocity of porous materials at high pressures
Institute of Scientific and Technical Information of China (English)
耿华运; 吴强; 谭华; 蔡灵仓; 经福谦
2002-01-01
A correction of Walsh's method for bulk sound velocity calculation for shocked porous materials is accomplishedbased on the Wu-Jing thermodynamic equation of state. The corrected bulk velocities for solid and porous sampleswith low porosities are in good agreement with the corresponding experimental data published previously. On the basisof this corrected equation, the influence of thermoelectrons on the bulk velocity of shocked materials is discussed indetail at pressures of 50, 70 and 200 GPa. Some interesting phenomena are revealed, which seem to be the uniquefeatures of a dynamic-pressure-loading process and could not be found in static experiments.
Salama, Amgad
2012-01-01
The flow of two or more immiscible fluids in porous media is ubiquitous particularly in oil industry. This includes secondary and tertiary oil recovery, CO2 sequestration, etc. Accurate predictions of the development of these processes are important in estimating the benefits, e.g., in the form of increased oil extraction, when using certain technology. However, this accurate prediction depends to a large extent on two things; the first is related to our ability to correctly characterize the reservoir with all its complexities and the second depends on our ability to develop robust techniques that solve the governing equations efficiently and accurately. In this work, we introduce a new robust and efficient numerical technique to solving the governing conservation laws which govern the movement of two immiscible fluids in the subsurface. This work will be applied to the problem of CO2 sequestration in deep saline aquifer; however, it can also be extended to incorporate more cases. The traditional solution algorithms to this problem are based on discretizing the governing laws on a generic cell and then proceed to the other cells within loops. Therefore, it is expected that, calling and iterating these loops several times can take significant amount of CPU time. Furthermore, if this process is done using programming languages which require repeated interpretation each time a loop is called like Matlab, Python or the like, extremely longer time is expected particularly for larger systems. In this new algorithm, the solution is done for all the nodes at once and not within loops. The solution methodology involves manipulating all the variables as column vectors. Then using shifting matrices, these vectors are sifted in such a way that subtracting relevant vectors produces the corresponding difference algorithm. It has been found that this technique significantly reduces the amount of CPU times compared with traditional technique implemented within the framework of
Hybrid Porous Materials for Controlled Release and Catalysis
Liu, Rui
2010-01-01
First reported in 1992, ordered mesoporous materials exhibit unique features, such as regular pore geometry, high surface area, and large pore volume, and have shown great potential in various applications. This dissertation combines the knowledge from the field of ordered mesoporous materials and several other research areas to design advanced hybrid porous materials for controlled release and catalysis applications.The demand for better treatment of illness has led to ever-increasing effort...
Hybrid Porous Materials for Controlled Release and Catalysis
Liu, Rui
2010-01-01
First reported in 1992, ordered mesoporous materials exhibit unique features, such as regular pore geometry, high surface area, and large pore volume, and have shown great potential in various applications. This dissertation combines the knowledge from the field of ordered mesoporous materials and several other research areas to design advanced hybrid porous materials for controlled release and catalysis applications.The demand for better treatment of illness has led to ever-increasing effort...
Fictitious crack modelling of polymethyl methacrylate porous material
Jimenez Pique, E.; Dortmans, L.J.M.G.; With, G. de
2002-01-01
Fracture tests were performed on a granular polymethyl methacrylate porous material used as a mould for white were castings. Two types of sample geometry (single-edge notch beam and wedge opening load) and two types of environment (dry at room temperature and in water at 45°C) were used and the forc
Fictitious crack modelling of polymethyl methacrylate porous material
Jimenez Pique, E.; Dortmans, L.J.M.G.; With, G. de
2002-01-01
Fracture tests were performed on a granular polymethyl methacrylate porous material used as a mould for white were castings. Two types of sample geometry (single-edge notch beam and wedge opening load) and two types of environment (dry at room temperature and in water at 45°C) were used and the forc
Modeling adsorption of liquid mixtures on porous materials
DEFF Research Database (Denmark)
Monsalvo, Matias Alfonso; Shapiro, Alexander
2009-01-01
The multicomponent potential theory of adsorption (MPTA), which was previously applied to adsorption from gases, is extended onto adsorption of liquid mixtures on porous materials. In the MPTA, the adsorbed fluid is considered as an inhomogeneous liquid with thermodynamic properties that depend...... on the distance from the solid surface (or position in the porous space). The theory describes the two kinds of interactions present in the adsorbed fluid, i.e. the fluid-fluid and fluid-solid interactions, by means of an equation of state and interaction potentials, respectively. The proposed extension...
Different radiation impedance models for finite porous materials
DEFF Research Database (Denmark)
Nolan, Melanie; Jeong, Cheol-Ho; Brunskog, Jonas;
2015-01-01
coupled to the transfer matrix method (TMM). These methods are found to yield comparable results when predicting the Sabine absorption coefficients of finite porous materials. Discrepancies with measurement results can essentially be explained by the unbalance between grazing and non-grazing sound field...... the infinite case. Thus, in order to predict the Sabine absorption coefficients of finite porous samples, one can incorporate models of the radiation impedance. In this study, different radiation impedance models are compared with two experimental examples. Thomasson’s model is compared to Rhazi’s method when...
Ahmad, Zahoor; Hanif, Muhammad
2013-01-01
The development of estimators of population parameters based on two-phase sampling schemes has seen a dramatic increase in the past decade. Various authors have developed estimators of population using either one or two auxiliary variables. The present volume is a comprehensive collection of estimators available in single and two phase sampling. The book covers estimators which utilize information on single, two and multiple auxiliary variables of both quantitative and qualitative nature. Th...
Preparation and antimicrobial ability of natural porous antibacterial materials
Institute of Scientific and Technical Information of China (English)
DONG Fa-qin; LI Guo-wu; SUN Zhi-gang; SHEN Gang; FENG Qi-ming; DAI Qun-wei
2005-01-01
The liquid ion exchange method, solid salt melt method and dry-wet circulation method were used to prepare natural porous antimicrobial materials with natural minerals, such as zeolite, spilite, palygorskite and montmorillonite, respectively. Atomic absorption spectrum and X-ray diffraction analysis were carried out to investigate the effects of Ag+, Cu2+ and Zn2+ on antimicrobial abilities of natural porous minerals, and the effect of preparation method on ion exchange capacity of antimicrobial material, respectively. The results show that for the ion exchange capacity, clay mineral is higher than fibrous mineral, i.e. both zeolite and montmorillonite are higher; the antimicrobial ability of material with Ag+ is the best; the exchange capacities of materials with Cu2+ or Zn2+ are all higher, but the antimicrobial ability of Cu2+ is better than that of Zn2+.
Improved Insight into Transport Phenomena in Porous Materials at Submicrometer Resolution
DEFF Research Database (Denmark)
Gooya, Reza
Traditionally it has been challenging to investigate ƒflow properties of porous media becauseof their complex and oft‰en heterogeneous pore geometry. However, these materialsare important for oil and gas, catalysts, fuel cells, groundwater quality, CO2 storageand in medical applications. In this ......Traditionally it has been challenging to investigate ƒflow properties of porous media becauseof their complex and oft‰en heterogeneous pore geometry. However, these materialsare important for oil and gas, catalysts, fuel cells, groundwater quality, CO2 storageand in medical applications....... In this thesis, transport phenomena- including single phaseƒow, two phase ƒow and reactive transport, were investigated at the pore scale. Œe motivationwas to €nd cheaper, easier and faster alternatives to macroscale investigations.In the fi€rst part, single phase ƒuid flƒow models were tested on experimentally...... materials at the pore scale. ThŒe coupled program wastested for two cases of chloride transport in a 2D channel and for a 2D ion exchanger.In this thesis, pore scale modeling was presented for several transport phenomenain porous media. ThŒeir agreement with the macroscale properties and the ability...
Cellular and Porous Materials Thermal Properties Simulation and Prediction
Öchsner, Andreas; de Lemos, Marcelo J S
2008-01-01
Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.
Porous low dielectric constant materials for microelectronics.
Baklanov, Mikhail R; Maex, Karen
2006-01-15
Materials with a low dielectric constant are required as interlayer dielectrics for the on-chip interconnection of ultra-large-scale integration devices to provide high speed, low dynamic power dissipation and low cross-talk noise. The selection of chemical compounds with low polarizability and the introduction of porosity result in a reduced dielectric constant. Integration of such materials into microelectronic circuits, however, poses a number of challenges, as the materials must meet strict requirements in terms of properties and reliability. These issues are the subject of the present paper.
Hydrophobic Porous Material Adsorbs Small Organic Molecules
Sharma, Pramod K.; Hickey, Gregory S.
1994-01-01
Composite molecular-sieve material has pore structure designed specifically for preferential adsorption of organic molecules for sizes ranging from 3 to 6 angstrom. Design based on principle that contaminant molecules become strongly bound to surface of adsorbent when size of contaminant molecules is nearly same as that of pores in adsorbent. Material used to remove small organic contaminant molecules from vacuum systems or from enclosed gaseous environments like closed-loop life-support systems.
FEATURES OF RESTORATION OF DISPERSE POROUS MATERIALS
Directory of Open Access Journals (Sweden)
S. L. Rovin
2016-01-01
Full Text Available The article presents the results of research recycling of dispersed materials in rotary furnaces. Has been received new data on the of heat and mass transfer processes and carry out intensive and continuous process of solid- liquid-phase reduction of oxides in a single unit.
Combustion Synthesis of Advanced Porous Materials in Microgravity Environment
Zhang, X.; Moore, J. J.; Schowengerdt, F. D.; Johnson, D. P.
1999-01-01
Combustion synthesis, otherwise known as self-propagating high temperature synthesis (SHS), can be used to produce engineered advanced porous material implants which offer the possibility for bone ingrowth as well as a permanent structure framework for the long-term replacement of bone defects. The primary advantage of SHS is based on its rapid kinetics and favorable energetics. The structure and properties of materials produced by SHS are strongly dependent on the combustion reaction conditions. Combustion reaction conditions such as reaction stoichiometry, particle size, green density, the presence and use of diluents or inert reactants, and pre-heating of the reactants, will affect the exothermicity of the reaction. A number of conditions must be satisfied in order to obtain high porosity materials: an optimal amount of liquid, gas and solid phases must be present in the combustion front. Therefore, a balance among these phases at the combustion front must be created by the SHS reaction to successfully engineer a bone replacement material system. Microgravity testing has extended the ability to form porous products. The convective heat transfer mechanisms which operate in normal gravity, 1 g, constrain the combustion synthesis reactions. Gravity also acts to limit the porosity which may be formed as the force of gravity serves to restrict the gas expansion and the liquid movement during reaction. Infiltration of the porous product with other phases can modify both the extent of porosity and the mechanical properties.
Heterogeneity of Energy and Geometry for Meso-porous Materials
Institute of Scientific and Technical Information of China (English)
Wenchuan Wang
2004-01-01
@@ The discovery of novel meso-porous materials having cylindrical and slit-like pores, such as zeolites,carbon nanotubes, activated carbon and meso-carbon microbeads (MCMBs), has aroused much attention in recent years. These materials are not only used directly as adsorbents, but also as substrates of catalysts for loading metals and other active substances.However, the description of heterogeneity of energy and of geometry of the pores is essential for characterization of these materials, and in computer simulations and density functional theory (DFT) calculation. Here, some approaches for dealing the heterogeneity are addressed for highlighting recent and future developments.
Frequency-dependent dynamic effective properties of porous materials
Institute of Scientific and Technical Information of China (English)
Peijun Wei; Zhuping Huang
2005-01-01
The frequency-dependent dynamic effective properties (phase velocity, attenuation and elastic modulus) of porous materials are studied numerically. The coherent plane longitudinal and shear wave equations, which are obtained by averaging on the multiple scattering fields, are used to evaluate the frequency-dependent dynamic effective properties of a porous material. It is found that the prediction of the dynamic effective properties includes the size effects of voids which are not included in most prediction of the traditional static effective properties. The prediction of the dynamic effective elastic modulus at a relatively low frequency range is compared with that of the traditional static effective elastic modulus, and the dynamic effective elastic modulus is found to be very close to the Hashin-Shtrikman upper bound.
Capillary Rise of Magnetohydrodynamics Liquid into Deformable Porous Material
Directory of Open Access Journals (Sweden)
Javed I Siddique
2016-01-01
Full Text Available We have developed a mathematical model for capillary rise of magnetohydrodynamic fluids. The liquid starts to imbibe because of capillary suction in an undeformed and initially dry sponge-like porous material. The driving force in our model is a pressure gradient across the evolving porous material that induces a stress gradient which in turn causes deformation that is characterized by a variable solid fraction. The problem is formulated as a non–linear moving boundary problem which we solve using the method of lines approach after transforming to a fixed computational domain. The summary of our finding includes a notable reduction in capillary rise and a decrease in solid deformation due to magnetic effects.
Gravitational Effects on Combustion Synthesis of Advanced Porous Materials
Zhang, X.; Moore, J. J.; Schowengerdt, F. D.; Thorne, K.
2000-01-01
Combustion Synthesis (self-Propagating high-temperature synthesis-(SHS)) of porous Ti-TiB(x), composite materials has been studied with respect to the sensitivity to the SHS reaction parameters of stoichiometry, green density, gasifying agents, ambient pressure, diluents and gravity. The main objective of this research program is to engineer the required porosity and mechanical properties into the composite materials to meet the requirements of a consumer, such as for the application of bone replacement materials. Gravity serves to restrict the gas expansion and the liquid movement during SHS reaction. As a result, gravitational forces affect the microstructure and properties of the SHS products. Reacting these SHS systems in low gravity in the KC-135 aircraft has extended the ability to form porous products. This paper will emphasize the effects of gravity (low g, 1g and 2g) on the SHS reaction process, and the microstructure and properties of the porous composite. Some of biomedical results are also discussed.
多孔介质两相流的守恒迎风有限元法%CONSERVATIVE UPWIND FINITE ELEMENT METHOD FOR TWO-PHASE FLOW IN POROUS MEDIA
Institute of Scientific and Technical Information of China (English)
马纳·萨德; 胡健伟
2001-01-01
Two-phase, immiscible in compressible flow in porous media governed by a system of non-linear partial differential equations arised from reservoir simulation is discussed. Galerkin method is applied for the pressure equation. For the convection-dominated saturation equation, a kind of partial upwind finite element scheme is constructed. The numerical solution got by this scheme satisfies the discrete mass conservation law and converges to the solution in norm L∞(0,T;L2(Ω)).%本文讨论油藏模拟中描述多孔介质两相不可压非混溶流动的偏微分方程组.压力方程用Galerkin方法,而对流占优的饱和度方程用一类部分迎风有限元法.数值解满足离散的质量守恒原理,并以L∞(0,Y;L2(Ω))范收敛于原解.
Modeling of shape memory alloys and application to porous materials
Panico, Michele
In the last two decades the number of innovative applications for advanced materials has been rapidly increasing. Shape memory alloys (SMAs) are an exciting class of these materials which exhibit large reversible stresses and strains due to a thermoelastic phase transformation. SMAs have been employed in the biomedical field for producing cardiovascular stents, shape memory foams have been successfully tested as bone implant material, and SMAs are being used as deployable switches in aerospace applications. The behavior of shape memory alloys is intrinsically complex due to the coupling of phase transformation with thermomechanical loading, so it is critical for constitutive models to correctly simulate their response over a wide range of stress and temperature. In the first part of this dissertation, we propose a macroscopic phenomenological model for SMAs that is based on the classical framework of thermodynamics of irreversible processes and accounts for the effect of multiaxial stress states and non-proportional loading histories. The model is able to account for the evolution of both self-accommodated and oriented martensite. Moreover, reorientation of the product phase according to loading direction is specifically accounted for. Computational tests demonstrate the ability of the model to simulate the main aspects of the shape memory response in a one-dimensional setting and some of the features that have been experimentally found in the case of multi-axial non-proportional loading histories. In the second part of this dissertation, this constitutive model has been used to study the mesoscopic behavior of porous shape memory alloys with particular attention to the mechanical response under cyclic loading conditions. In order to perform numerical simulations, the model was implemented into the commercial finite element code ABAQUS. Due to stress concentrations in a porous microstructure, the constitutive law was enhanced to account for the development of
Supercritical nitrogen processing for the purification of reactive porous materials.
Stadie, Nicholas P; Callini, Elsa; Mauron, Philippe; Borgschulte, Andreas; Züttel, Andreas
2015-05-15
Supercritical fluid extraction and drying methods are well established in numerous applications for the synthesis and processing of porous materials. Herein, nitrogen is presented as a novel supercritical drying fluid for specialized applications such as in the processing of reactive porous materials, where carbon dioxide and other fluids are not appropriate due to their higher chemical reactivity. Nitrogen exhibits similar physical properties in the near-critical region of its phase diagram as compared to carbon dioxide: a widely tunable density up to ~1 g ml(-1), modest critical pressure (3.4 MPa), and small molecular diameter of ~3.6 Å. The key to achieving a high solvation power of nitrogen is to apply a processing temperature in the range of 80-150 K, where the density of nitrogen is an order of magnitude higher than at similar pressures near ambient temperature. The detailed solvation properties of nitrogen, and especially its selectivity, across a wide range of common target species of extraction still require further investigation. Herein we describe a protocol for the supercritical nitrogen processing of porous magnesium borohydride.
Introduction to porous spinel for refractory (high temp material
Directory of Open Access Journals (Sweden)
Kumar Saurav
2016-09-01
Full Text Available The paper examines thermal properties of materials. The transient pulse method was used for specific heat, thermal diffusivity and thermal conductivity determination. Porous MgO was synthesis by heating pellets at 1100 °C for 1 h. The resultant porous MgO was then immersed in 10 mol/L aluminum nitrate solution, dried, and reheated at 1300 °C for 2 h to convert it to spinel. The evaluation was performed with the help of mathematical apparatus used for study of fractal structures properties. The method results from generalized relations that were designed for study of physical properties of fractal structures. As it is shown these relations are in a good agreement with the equations used for the description of time responses of temperature for the pulse input of supplied heat.
Dynamic behavior of particulate/porous energetic materials
Nesterenko, Vitali F.; Chiu, Po-Hsun; Braithwaite, C. H.; Collins, Adam; Williamson, David Martin; Olney, Karl L.; Benson, David; McKenzie, Francesca
2012-03-01
Dynamic behavior of particulate/porous energetic materials in a broad range of dynamic conditions (low velocity impact and explosively driven expansion of rings) is discussed. Samples of these materials were fabricated using Cold Isostatic Pressing and Hot Isostatic Pressing with and without vacuum encapsulation. The current interest in these materials is due to the combination of their high strength and output of energy under critical conditions of mechanical deformation. They may exhibit high compressive and tensile strength with the ability to undergo bulk distributed fracture resulting in small size reactive fragments. The mechanical properties of these materials and the fragment sizes produced by fracturing are highly sensitive to mesostructure. For example, the dynamic strength of Al-W composites with fine W particles is significantly larger than the strength of composites with coarse W particles at the same porosity. The morphology of W inclusions had a strong effect on the dynamic strength and fracture pattern. Experimental results are compared with numerical data.
Design, preparation, and application of ordered porous polymer materials
Energy Technology Data Exchange (ETDEWEB)
Liu, Qingquan, E-mail: qqliu@hnust.edu.cn; Tang, Zhe; Ou, Baoli; Liu, Lihua; Zhou, Zhihua, E-mail: zhou7381@126.com; Shen, Shaohua; Duan, Yinxiang
2014-04-01
Ordered porous polymer (OPP) materials have extensively application prospects in the field of separation and purification, biomembrane, solid supports for sensors catalysts, scaffolds for tissue engineering, photonic band gap materials owing to ordered pore arrays, uniform and tunable pore size, high specific surface area, great adsorption capacity, and light weight. The present paper reviewed the preparation techniques of OPP materials like breath figures, hard template, and soft template. Finally, the applications of OPP materials in the field of separation, sensors, and biomedicine are introduced, respectively. - Highlights: • Breath figures involve polymer casting under moist ambience. • Hard template employs monodisperse colloidal spheres as a template. • Soft template utilizes the etched block in copolymers as template.
Porous Materials for Hydrolytic Dehydrogenation of Ammonia Borane
Directory of Open Access Journals (Sweden)
Tetsuo Umegaki
2015-07-01
Full Text Available Hydrogen storage is still one of the most significant issues hindering the development of a “hydrogen energy economy”. Ammonia borane is notable for its high hydrogen densities. For the material, one of the main challenges is to release efficiently the maximum amount of the stored hydrogen. Hydrolysis reaction is a promising process by which hydrogen can be easily generated from this compound. High purity hydrogen from this compound can be evolved in the presence of solid acid or metal based catalyst. The reaction performance depends on the morphology and/or structure of these materials. In this review, we survey the research on nanostructured materials, especially porous materials for hydrogen generation from hydrolysis of ammonia borane.
Characterization of porous materials by small-angle scattering
Indian Academy of Sciences (India)
S Mazumder; D Sen; A K Patra
2004-07-01
Characterization of porous materials by small-angle scattering has been extensively pursued for several years now as the pores are often of mesoscopic size and compatible with the length scale accessible by the technique using both neutrons and X-rays as probing radiation. With the availability of ultra small-angle scattering instruments, one can investigate porous materials in the sub-micron length scale. Because of the increased accessible length scale vis-a-vis the multiple scattering effect, conventional data analysis procedures based on single scattering approximation quite often fail. The limitation of conventional data analysis procedures is also pronounced in the case of thick samples and long wavelength of the probing radiation. Effect of multiple scattering is manifested by broadening the scattering profile. Sample thickness for some technologically important materials is often significantly high, as the experimental samples have to replicate all its essential properties in the bulk material. Larger wavelength of the probing radiation is used in some cases to access large length scale and also to minimize the effect of double Bragg reflections.
Energy Technology Data Exchange (ETDEWEB)
McKinsey, Daniel Nicholas [Yale University
2013-08-27
The McKinsey group at Yale has been awarded a grant from DTRA for the building of a Liquid Xenon Gamma Ray Color Camera (LXe-GRCC), which combines state-of-the-art detection of LXe scintillation light and time projection chamber (TPC) charge readout. The DTRA application requires a movable detector and hence only a single phase (liquid) xenon detector can be considered in this case. We propose to extend the DTRA project to applications that allow a two phase (liquid/gas) xenon TPC. This entails additional (yet minimal) hardware and extension of the research effort funded by DTRA. The two phase detector will have better energy and angular resolution. Such detectors will be useful for PET medical imaging and detection of special nuclear material in stationary applications (e.g. port of entry). The expertise of the UConn group in gas phase TPCs will enhance the capabilities of the Yale group and the synergy between the two groups will be very beneficial for this research project as well as the education and research projects of the two universities. The LXe technology to be used in this project has matured rapidly over the past few years, developed for use in detectors for nuclear physics and astrophysics. This technology may now be applied in a straightforward way to the imaging of gamma rays. According to detailed Monte Carlo simulations recently performed at Yale University, energy resolution of 1% and angular resolution of 3 degrees may be obtained for 1.0 MeV gamma rays, using existing technology. With further research and development, energy resolution of 0.5% and angular resolution of 1.3 degrees will be possible at 1.0 MeV. Because liquid xenon is a high density, high Z material, it is highly efficient for scattering and capturing gamma rays. In addition, this technology scales elegantly to large detector areas, with several square meter apertures possible. The Yale research group is highly experienced in the development and use of noble liquid detectors for
Characterization of porous construction materials using electromagnetic radar wave
Lai, Wallace Wai Lok
This thesis reports the effort of characterizing three porous construction materials (i.e. concrete, asphalt and soils) and the establishment and formulation of novel unified constitutive models by utilizing electromagnetic (EM) radar wave. An important outcome of this research is that the studied materials were assigned successfully into their rightful positions corresponding to the different regimes governed by three EM wave properties and two engineering/geological properties of the materials. The former refers to the real part of complex dielectric permittivity (epsilon'), energy attenuation and peak-frequency drift. The latter refers to porosity and permeability determined with forward models or conventional testing techniques. In soil and asphalt, the material characterization was achieved by a novel inhouse developed method called Cyclic Moisture Variation Technique (CMVT). The technique is termed cyclic because the porous materials were subjected to change from partially saturated states to fully saturated state (i.e. permeation), and vice versa (i.e. de-watering). With CMVT, water was used as an enhancer or a tracer to differentiate the studied materials which are otherwise difficult when they are dry. Soils and asphalt with different textures were characterized by different curve families exhibited in the relationship between epsilon' and degrees of water saturation (SW). In particular, these curve families were divided into three regions: slow-climbing region in very low SW, fast-climbing region in intermediate SW and another slow-climbing region at high S W. When data obtained from the permeation and de-watering cycles was compared, dielectric hysteresis was observed, but rarely reported in the field of ground penetrating radar (GPR). Different curing histories affect both porosity and pore size distribution within mature concrete. By injecting pressurized water into concrete specimens, different concrete curing histories was back-tracked through the
Advanced Porous Coating for Low-Density Ceramic Insulation Materials
Leiser, Daniel B.; Churchward, Rex; Katvala, Victor; Stewart, David; Balter, Aliza
1988-01-01
The need for improved coatings on low-density reusable surface insulation (RSI) materials used on the space shuttle has stimulated research into developing tougher coatings. The processing of a new porous composite "coating" for RST called toughened unipiece fibrous insulation Is discussed. Characteristics including performance in a simulated high-speed atmospheric entry, morphological structure before and after this exposure, resistance to Impact, and thermal response to a typical heat pulse are described. It is shown that this coating has improved impact resistance while maintaining optical and thermal properties comparable to the previously available reaction-cured glass coating.
Synergistic Carbon Dioxide Capture and Conversion in Porous Materials.
Zhang, Yugen; Lim, Diane S W
2015-08-24
Global climate change and excessive CO2 emissions have caused widespread public concern in recent years. Tremendous efforts have been made towards CO2 capture and conversion. This has led to the development of numerous porous materials as CO2 capture sorbents. Concurrently, the conversion of CO2 into value-added products by chemical methods has also been well-documented recently. However, realizing the attractive prospect of direct, in situ chemical conversion of captured CO2 into other chemicals remains a challenge.
Tissue engineering scaffold material of porous nanohydroxyapatite/polyamide 66
Xu, Qian
2010-01-01
Qian Xu1, Hongyan Lu1, Jingchao Zhang1, Guoyu Lu2, Zhennan Deng2, Anchun Mo31State Key Laboratory of Oral Diseases, Sichuan University, Chengdu, 610041, P.R. China; 2Research Center for Nano-Biomaterials, Sichuan University, Chengdu, 610064, P.R. China; 3Department of Oral Implant, West China College of Stomatology, Sichuan University, Chengdu, 610041, P.R. ChinaAbstract: The aim of the study was to investigate a porous nanohydroxyapatite/polyamide 66 (n-HA/PA66) scaffold material that was im...
Static Corrosion Test of Porous Iron Material with Polymer Coating
Markušová-Bučková, Lucia; Oriňaková, Renáta; Oriňak, Andrej; Gorejová, Radka; Kupková, Miriam; Hrubovčáková, Monika; Baláž, Matej; Kováľ, Karol
2016-12-01
At present biodegradable implants received increased attention due to their use in various fields of medicine. This work is dedicated to testing of biodegradable materials which could be used as bone implants. The samples were prepared from the carbonyl iron powder by replication method and surface polymer film was produced through sol-gel process. Corrosion testing was carried out under static conditions during 12 weeks in Hank's solution. The quantity of corrosion products increased with prolonging time of static test as it can be concluded from the results of EDX analysis. The degradation of open cell materials with polyethylene glycol coating layer was faster compared to uncoated Fe sample. Also the mass losses were higher for samples with PEG coating. The polymer coating brought about the desired increase in degradation rate of porous iron material.
Basalt fiber reinforced porous aggregates-geopolymer based cellular material
Luo, Xin; Xu, Jin-Yu; Li, Weimin
2015-09-01
Basalt fiber reinforced porous aggregates-geopolymer based cellular material (BFRPGCM) was prepared. The stress-strain curve has been worked out. The ideal energy-absorbing efficiency has been analyzed and the application prospect has been explored. The results show the following: fiber reinforced cellular material has successively sized pore structures; the stress-strain curve has two stages: elastic stage and yielding plateau stage; the greatest value of the ideal energy-absorbing efficiency of BFRPGCM is 89.11%, which suggests BFRPGCM has excellent energy-absorbing property. Thus, it can be seen that BFRPGCM is easy and simple to make, has high plasticity, low density and excellent energy-absorbing features. So, BFRPGCM is a promising energy-absorbing material used especially in civil defense engineering.
Fan, C.; Tian, Y.; Wang, Z. Q.; Nie, J. K.; Wang, G. K.; Liu, X. S.
2017-06-01
In view of the noise feature and service environment of urban power substations, this paper explores the idea of compound impedance, fills some porous sound-absorption material in the first resonance cavity of the double-resonance sound-absorption material, and designs a new-type of composite acoustic board. We conduct some acoustic characterizations according to the standard test of impedance tube, and research on the influence of assembly order, the thickness and area density of the filling material, and back cavity on material sound-absorption performance. The results show that the new-type of acoustic board consisting of aluminum fibrous material as inner structure, micro-porous board as outer structure, and polyester-filled space between them, has good sound-absorption performance for low frequency and full frequency noise. When the thickness, area density of filling material and thickness of back cavity increase, the sound absorption coefficient curve peak will move toward low frequency.
Advances in design and modeling of porous materials
Ayral, André; Calas-Etienne, Sylvie; Coasne, Benoit; Deratani, André; Evstratov, Alexis; Galarneau, Anne; Grande, Daniel; Hureau, Matthieu; Jobic, Hervé; Morlay, Catherine; Parmentier, Julien; Prelot, Bénédicte; Rossignol, Sylvie; Simon-Masseron, Angélique; Thibault-Starzyk, Frédéric
2015-07-01
This special issue of the European Physical Journal Special Topics is dedicated to selected papers from the symposium "High surface area porous and granular materials" organized in the frame of the conference "Matériaux 2014", held on November 24-28, 2014 in Montpellier, France. Porous materials and granular materials gather a wide variety of heterogeneous, isotropic or anisotropic media made of inorganic, organic or hybrid solid skeletons, with open or closed porosity, and pore sizes ranging from the centimeter scale to the sub-nanometer scale. Their technological and industrial applications cover numerous areas from building and civil engineering to microelectronics, including also metallurgy, chemistry, health, waste water and gas effluent treatment. Many emerging processes related to environmental protection and sustainable development also rely on this class of materials. Their functional properties are related to specific transfer mechanisms (matter, heat, radiation, electrical charge), to pore surface chemistry (exchange, adsorption, heterogeneous catalysis) and to retention inside confined volumes (storage, separation, exchange, controlled release). The development of innovative synthesis, shaping, characterization and modeling approaches enables the design of advanced materials with enhanced functional performance. The papers collected in this special issue offer a good overview of the state-of-the-art and science of these complex media. We would like to thank all the speakers and participants for their contribution to the success of the symposium. We also express our gratitude to the organization committee of "Matériaux 2014". We finally thank the reviewers and the staff of the European Physical Journal Special Topics who made the publication of this special issue possible.
Porous graphene materials for advanced electrochemical energy storage and conversion devices.
Han, Sheng; Wu, Dongqing; Li, Shuang; Zhang, Fan; Feng, Xinliang
2014-02-12
Combining the advantages from both porous materials and graphene, porous graphene materials have attracted vast interests due to their large surface areas, unique porous structures, diversified compositions and excellent electronic conductivity. These unordinary features enable porous graphene materials to serve as key components in high-performance electrochemical energy storage and conversion devices such as lithium ion batteries, supercapacitors, and fuel cells. This progress report summarizes the typical fabrication methods for porous graphene materials with micro-, meso-, and macro-porous structures. The structure-property relationships of these materials and their application in advanced electrochemical devices are also discussed. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Selection of Raw Materials for the Reactive Sinterling of Zircon Porous Ceramics
Institute of Scientific and Technical Information of China (English)
SHENYi; ZHANGWenli; 等
1999-01-01
The effect of three kinds of zircon raw materials on the sinterability and properties of porous zircon ceramics have been investigated.The results have shown that all the tested fired compacts are of high porosity,However,the sintering process are different for different raw materials.The preferable selected raw materials for porous zircon ceramics were commercials zircon and quartz.
System level permeability modeling of porous hydrogen storage materials.
Energy Technology Data Exchange (ETDEWEB)
Kanouff, Michael P.; Dedrick, Daniel E.; Voskuilen, Tyler (Purdue University, West Lafayette, IN)
2010-01-01
A permeability model for hydrogen transport in a porous material is successfully applied to both laboratory-scale and vehicle-scale sodium alanate hydrogen storage systems. The use of a Knudsen number dependent relationship for permeability of the material in conjunction with a constant area fraction channeling model is shown to accurately predict hydrogen flow through the reactors. Generally applicable model parameters were obtained by numerically fitting experimental measurements from reactors of different sizes and aspect ratios. The degree of channeling was experimentally determined from the measurements and found to be 2.08% of total cross-sectional area. Use of this constant area channeling model and the Knudsen dependent Young & Todd permeability model allows for accurate prediction of the hydrogen uptake performance of full-scale sodium alanate and similar metal hydride systems.
Interpenetration in coordination polymers: structural diversities toward porous functional materials
Directory of Open Access Journals (Sweden)
Ritesh Haldar
2015-03-01
Full Text Available Interpenetration is a natural phenomenon frequently encountered in porous coordination polymers (PCPs or metal-organic frameworks (MOFs. Traditionally interpenetration has been considered as a threat to permanent porosity and several strategies have been adopted to control the framework interpenetration. Recent literature reports have unveiled that interpenetration has paramount importance in several material properties particularly in storage and separation of small gas molecules. Such frameworks also show interesting structural flexibility based on shearing or movement of the nets and also reveals guest induced dynamic structural transformation for modulated specific functions. In this review, we will emphasize several interpenetration phenomena observed in coordination polymers, their intriguing structural aspects and fascinating material properties.
DEFF Research Database (Denmark)
Johannesson, Björn; Nyman, U.
2010-01-01
A numerical approach for moisture transport in porous materials like concrete is presented. The model considers mass balance equations for the vapour phase and the water phase in the material together with constitutive equations for the mass flows and for the exchange of mass between the two phases....... History-dependent sorption behaviour is introduced by considering scanning curves between the bounding desorption and absorption curves. The method, therefore, makes it possible to calculate equilibrium water contents for arbitrary relative humidity variations at every material point considered......-Raphson equilibrium iteration scheme within the time steps. Examples are presented illustrating the performance and potential of the model. Two different types of measurements on moisture content profiles in concrete are used to verify the relevance of the novel proposed model for moisture transport and sorption...
Design of advanced porous graphene materials: from graphene nanomesh to 3D architectures.
Jiang, Lili; Fan, Zhuangjun
2014-02-21
In order to make full utilization of the high intrinsic surface area of graphene, recently, porous graphene materials including graphene nanomesh, crumpled graphene and graphene foam, have attracted tremendous attention and research interest, owing to their exceptional porous structure (high surface area, and high pore volume) in combination with the inherent properties of graphene, such as high electronic conductivity, good thermal stability, and excellent mechanical strength. Interestingly, porous graphene materials and their derivatives have been explored in a wide range of applications in the fields of electronic and photonic devices, energy storage, gas separation/storage, oil absorption and sensors. This article reviews recent progress in the synthesis, characterization, properties, and applications of porous graphene materials. We aim to highlight the importance of designing different porous structures of graphene to meet future challenges, and the trend on future design of porous graphene materials is analyzed.
Indian Academy of Sciences (India)
Ling Xu; Limei Duan; Zongrui Liu; Jingqi Guan; Qiubin Kan
2013-12-01
A series of hierarchical porous aluminosilicate materials were prepared using hydrothermal treatment of the composite formed by polystyrene colloidal spheres and aluminosilicate gel. Influence of Al content on the textural properties, acidic properties and catalytic activity of the hierarchical porous aluminosilicate materials was studied. The results showed that textural and acidic properties of the hierarchical porous aluminosilicate materials were strongly related to Al content. As Al content is increased (Si/Al = 25), the hierarchical porous catalysts exhibited higher catalytic activity and major product selectivity for alkylation of phenol with tert-butanol than the catalysts with a lower Al content (Si/Al = 50).
Porous multi-component material for the capture and separation of species of interest
Energy Technology Data Exchange (ETDEWEB)
Addleman, Raymond S.; Chouyyok, Wilaiwan; Li, Xiaohong S.; Cinson, Anthony D.; Gerasimenko, Aleksandr A
2016-06-21
A method and porous multi-component material for the capture, separation or chemical reaction of a species of interest is disclosed. The porous multi-component material includes a substrate and a composite thin film. The composite thin film is formed by combining a porous polymer with a nanostructured material. The nanostructured material may include a surface chemistry for the capture of chemicals or particles. The composite thin film is coupled to the support or device surface. The method and material provides a simple, fast, and chemically and physically benign way to integrate nanostructured materials into devices while preserving their chemical activity.
Controlling shockwave dynamics using architecture in periodic porous materials
Branch, Brittany; Ionita, Axinte; Clements, Bradford E.; Montgomery, David S.; Jensen, Brian J.; Patterson, Brian; Schmalzer, Andrew; Mueller, Alexander; Dattelbaum, Dana M.
2017-04-01
Additive manufacturing (AM) is an attractive approach for the design and fabrication of structures capable of achieving controlled mechanical response of the underlying deformation mechanisms. While there are numerous examples illustrating how the quasi-static mechanical responses of polymer foams have been tailored by additive manufacturing, there is limited understanding of the response of these materials under shockwave compression. Dynamic compression experiments coupled with time-resolved X-ray imaging were performed to obtain insights into the in situ evolution of shockwave coupling to porous, periodic polymer foams. We further demonstrate shock wave modulation or "spatially graded-flow" in shock-driven experiments via the spatial control of layer symmetries afforded by additive manufacturing techniques at the micron scale.
Disordered, strongly scattering porous materials as miniature multipass gas cells
Svensson, Tomas; Lewander, Märta; Xu, Can T; Svanberg, Sune
2010-01-01
Spectroscopic gas sensing is both a commercial success and a rapidly advancing scientific field. Throughout the years, massive efforts have been directed towards improving detection limits by achieving long interaction pathlengths. Prominent examples include the use of conventional multipass gas cells, sophisticated high-finesse cavities, gas-filled holey fibers, integrating spheres, and diffusive reflectors. Despite this rich flora of approaches, there is a continuous struggle to reduce size, gas volume, cost and alignment complexity. Here, we show that extreme light scattering in porous materials can be used to realise miniature gas cells. Near-infrared transmission through a 7 mm zirconia (ZrO2) sample with a 49% porosity and subwavelength pore structure (on the order of 100 nm) gives rise to an effective gas interaction pathlength above 5 meters, an enhancement corresponding to 750 passes through a conventional multipass cell. This essentially different approach to pathlength enhancement opens a new route...
Suitability of various materials for porous filters in diffusion experiments
Energy Technology Data Exchange (ETDEWEB)
Aldaba, David; Vidal, Miquel; Rigol, Anna [Univ. de Barcelona (Spain). Dept. de Quimica Analitica; Glaus, Martin; Van Loon, Luc [Paul Scherrer Institut, Villigen PSI (Switzerland). Lab. for Waste Management; Leupin, Olivier [Nagra, Wettingen (Switzerland)
2014-10-01
The suitability of different porous materials (stainless steel, VYCOR {sup registered} glass, Al{sub 2}O{sub 3} and PEEK) for use as confining filters in diffusion experiments was evaluated by measuring the effective diffusion coefficients (D{sub e}) of neutral (HTO) and ionic solutes (Na{sup +}, Cs{sup +}, Sr{sup 2+}, Cl{sup -}, SeO{sub 4}{sup 2-}) in the materials in through-diffusion experiments. For stainless steel filters, the D{sub e} values of the target solutes correlated satisfactorily with their bulk diffusion coefficient in water (D{sub w}); thus, the diffusion process in the stainless steel filters was primarily controlled by the diffusivity of the solvated ions. For the remaining materials, the D{sub e} and D{sub w} values were also correlated for the target solutes, and the geometric factors were in the sequence: VYCOR {sup registered} glass < Al{sub 2}O{sub 3} < PEEK. Stainless steel and VYCOR {sup registered} glass were the most appropriate materials because of their high D{sub e} values, but a specific interaction of caesium with VYCOR {sup registered} glass was hypothesised because the D{sub e} values obtained for this solute were slightly higher than expected.
Novel Techniques to Characterize Pore Size of Porous Materials
Alabdulghani, Ali J.
2016-04-24
Porous materials are implemented in several industrial applications such as water desalination, gas separation and pharmaceutical care which they are mainly governed by the pore size and the PSD. Analyzing shale reservoirs are not excluded from these applications and numerous advantages can be gained by evaluating the PSD of a given shale reservoir. Because of the limitations of the conventional characterization techniques, novel methods for characterizing the PSD have to be proposed in order to obtain better characterization results for the porous materials, in general, and shale rocks in particular. Thus, permporosimetry and evapoporometry (EP) technologies were introduced, designed and utilized for evaluating the two key parameters, pore size and pore size distribution. The pore size and PSD profiles of different shale samples from Norway and Argentina were analyzed using these technologies and then confirmed by mercury intrusion porosimeter (MIP). Norway samples showed an average pore diameter of 12.94 nm and 19.22 nm with an average diameter of 13.77 nm and 23.23 nm for Argentina samples using permporosimetry and EP respectively. Both techniques are therefore indicative of the heterogeneity of the shales. The results from permporosimetry are in good agreement with those obtained from MIP technique, but EP for most part over-estimates the average pore size. The divergence of EP results compared to permporosimetry results is referred to the fact that the latter technique measures only the active pores which is not the case with the former technique. Overall, both techniques are complementary to each other which the results from both techniques seem reasonable and reliable and provide two simple techniques to estimate the pore size and pore size distributions for shale rocks.
Lin, YuPo J.; Henry, Michael P.; Snyder, Seth W.
2008-11-18
An electrically and ionically conductive porous material including a thermoplastic binder and one or more of anion exchange moieties or cation exchange moieties or mixtures thereof and/or one or more of a protein capture resin and an electrically conductive material. The thermoplastic binder immobilizes the moieties with respect to each other but does not substantially coat the moieties and forms the electrically conductive porous material. A wafer of the material and a method of making the material and wafer are disclosed.
Petkovich, Nicholas Daniel
Materials with nm- and mum-scale pores are important in the design of efficient, safe, and versatile energy conversion and storage systems. In the research detailed in this thesis, the synthesis and testing of porous materials for lithium-ion battery anodes and for thermochemical fuel production are explored. The preparation, modification, and performance of various carbon and transition metal oxide composite materials for lithium-ion battery electrodes are discussed in the first part of this work. Of particular interest are TiO 2/carbon composites that possess a three-dimensionally ordered macroporous (3DOM) structure, and, in some instances, additional mesoporosity. By changing the chelating agent used to stabilize the precursor for TiO2, crystallites of TiO2 can either be localized on the surface of the 3DOM structure or buried within the carbon matrix. This positioning has important ramifications for the electrochemical properties of the materials. In addition, the content of carbon in the composite materials can be altered. For carbon-rich composites, improved Li+ insertion/extraction capacities are attained by changing the voltage window used for cycling. Carbon can also be removed altogether, allowing for the formation 3DOM TiO¬2 with good electrochemical properties Conversion of the 3DOM TiO2 to sodium titanate is demonstrated via the ambient pressure treatment of the 3DOM material in sodium hydroxide. Subsequent ion-exchange with H+ results in the formation of hydrogen titanate materials with extremely high surface areas. A remnant of the 3DOM structure remains in these materials. Cerium oxide, praseodymium oxide and perovskite oxide-based catalysts for the thermochemical conversion of solar energy and abundant feedstocks (H2O and CO2) into useable fuels (H2 and CO) are investigated in the second part of this work. All of these materials possess a 3DOM structure and have moderate surface areas intended to improve reaction kinetics. Mixed oxides containing
Electrokinetic salt removal from porous building materials using ion exchange membranes
Kamran, K.; Van Soestbergen, M.; Pel, L.
The removal of salt from porous building materials under the influence of an applied voltage gradient normally results in high pH gradients due to the formation of protons and hydroxyl ions at the electrodes. The formed acidic and alkaline regions not only lead to disintegration of the porous materi
A novel method to determine effective thermal conductivity of porous materials
Institute of Scientific and Technical Information of China (English)
QIAN Jiyu; LI Qiang; YU Kai; XUAN Yimin
2004-01-01
A 2D Lattice-Boltzmann (LB) model is proposed for analyzing the heat conduction process in the porous media. The effective thermal conductivities of several porous materials are calculated by means of this model. The calculated results are found to be in excellent agreement with the experimental data of the existing references. The factors affecting the effective thermal conductivity of porous materials are discussed. The results show that the effective thermal conductivity is strongly dependent upon the porosity and the pore structure and only has imperceptible dependence on the pore density. Then the correlation for estimating the effective thermal conductivity of the porous material is established. This LB model can be used conveniently to calculate and analyze the heat conduction problems of porous media or other materials with complex geometry boundary in pore scale.
Simulation Study of Shock Reaction on Porous Material
Institute of Scientific and Technical Information of China (English)
XU Ai-Guo; ZHANG Guang-Cai; PAN Xiao-Fei; ZHU Jian-Shi
2009-01-01
Direct modeling of porous materials under shock is a complex issue.We investigate such a system via the newly developed material-point method.The effects of shock strength and porosity size are the main concerns.For the same porosity, the effects of mean-void-size are checked.It is found that local turbulence mixing and volume dissipation are two important mechanisms for transformation of kinetic energy to heat.When the porosity is very small, the shocked portion may arrive at a dynamical steady state; the voids in the downstream portion reflect back rarefactive waves and result in slight oscillations of mean density and pressure; for the same value of porosity, a larger mean-void-size makes a higher mean temperature.When the porosity becomes large, hydrodynamic quantities vary with time during the whole shock-loading procedure: after the initial stage, the mean density and pressure decrease, but the temperature increases with a higher rate.The distributions of local density, pressure, temperature and particle-velocity are generally non-Gaussian and vary with time.The changing rates depend on the porosity value, mean-void-size and shock strength.The stronger the loaded shock, the stronger the porosity effects.This work provides a supplement to experiments for the very quick procedures and reveals more fundamental mechanisms in energy and momentum transportation.
Institute of Scientific and Technical Information of China (English)
Renxi Jin; Xiulan Huai
2005-01-01
The measurements of temperature and moisture content of a wet porous material were accomplished on the micro-seconds scale. The temperature wave was observed when the wet porous material was heated by short-pulsed laser with high power. It firstly revealed that the moisture content of wet porous material rapidly rises twice in one laser irradiation. The influences of laser parameters, the thickness and initial moisture content of the wet porous material on its temperature and moisture content were investigated.
Volfkovich, Yury Mironovich; Bagotsky, Vladimir Sergeevich
2014-01-01
This book provides a comprehensive and concise description of most important aspects of experimental and theoretical investigations of porous materials and powders, with the use and application of these materials in different fields of science, technology, national economy and environment. It allows the reader to understand the basic regularities of heat and mass transfer and adsorption occurring in qualitatively different porous materials and products, and allows the reader to optimize the functional properties of porous and powdered products and materials. Written in an straightforward and transparent manner, this book is accessible to both experts and those without specialist knowledge, and it is further elucidated by drawings, schemes and photographs. Porous materials and powders with different pore sizes are used in many areas of industry, geology, agriculture and science. These areas include (i) a variety of devices and supplies; (ii) thermal insulation and building materials; (iii) oil-bearing geologic...
Energy Technology Data Exchange (ETDEWEB)
Margolis, S.B.
1997-09-01
A theoretical two-phase-flow analysis is developed to describe the quasi-steady propagation, across a pressure jump, of a multi-phase deflagration in confined porous energetic materials. The difference, or overpressure, between the upstream (unburned) and downstream (burned) gas pressure leads to a more complex structure than that which is obtained for an unconfined deflagration in which the pressure across the multi-phase flame region is approximately constant. In particular, the structure of such a wave is shown by asymptotic methods to consist of a thin boundary layer characterized by gas permeation into the unburned solid, followed by a liquid/gas flame region, common to both types of problems, in which the melted material is preheated further and ultimately converted to gaseous products. The effect of gas flow relative to the condensed material is shown to be significant, both in the porous unburned solid as well as in the exothermic liquid/gas melt layer, and is, in turn, strongly affected by the overpressure. Indeed, all quantities of interest, including the burned temperature, gas velocity and the propagation speed, depend on this pressure difference, leading to a significant enhancement of the burning rate with increasing overpressure. In the limit that the overpressure becomes small, the pressure gradient is insufficient to drive gas produced in the reaction zone in the upstream direction, and all gas flow relative to the condensed material is directed in the downstream direction, as in the case of an unconfined deflagration. The present analysis is particularly applicable to those types of porous energetic solids, such as degraded nitramine propellants, that can experience significant gas flow in the solid preheat region and which are characterized by the presence of exothermic reactions in a bubbling melt layer at their surfaces. 7 refs., 6 figs.
Modulation power of porous materials and usage as ripple filter in particle therapy.
Printz Ringbæk, Toke; Simeonov, Yuri; Witt, Matthias; Engenhart-Cabillic, Rita; Kraft, Gerhard; Zink, Klemens; Weber, Uli
2017-04-07
Porous materials with microscopic structures like foam, sponges, lung tissues and lung substitute materials have particular characteristics, which differ from those of solid materials. Ion beams passing through porous materials show much stronger energy straggling than expected for non-porous solid materials of the same thickness. This effect depends on the microscopic fine structure, the density and the thickness of the porous material. The beam-modulating effect from a porous plate enlarges the Bragg peak, yielding similar benefits in irradiation time reduction as a ripple filter. A porous plate can additionally function as a range shifter, which since a higher energy can be selected for the same penetration depth in the body reduces the scattering at the beam line and therefore improves the lateral fall-off. Bragg curve measurements of ion beams passing through different porous materials have been performed in order to determine the beam modulation effect of each. A mathematical model describing the correlation between the mean material density, the porous pore structure size and the strength of the modulation has been developed and a new material parameter called 'modulation power' is defined as the square of the Gaussian sigma divided by the mean water-equivalent thickness of the porous absorber. Monte Carlo simulations have been performed in order to validate the model and to investigate the Bragg peak enlargement, the scattering effects of porosity and the lateral beam width at the end of the beam range. The porosity is found to only influence the lateral scattering in a negligible way. As an example of a practical application, it is found that a 20 mm and 50 mm plate of Gammex LN300 performs similar to a 3 mm and 6 mm ripple filter, respectively, and at the same time can improve the sharpness of the lateral beam due to its multifunctionality as a ripple filter and a range shifter.
Modulation power of porous materials and usage as ripple filter in particle therapy
Printz Ringbæk, Toke; Simeonov, Yuri; Witt, Matthias; Engenhart-Cabillic, Rita; Kraft, Gerhard; Zink, Klemens; Weber, Uli
2017-04-01
Porous materials with microscopic structures like foam, sponges, lung tissues and lung substitute materials have particular characteristics, which differ from those of solid materials. Ion beams passing through porous materials show much stronger energy straggling than expected for non-porous solid materials of the same thickness. This effect depends on the microscopic fine structure, the density and the thickness of the porous material. The beam-modulating effect from a porous plate enlarges the Bragg peak, yielding similar benefits in irradiation time reduction as a ripple filter. A porous plate can additionally function as a range shifter, which since a higher energy can be selected for the same penetration depth in the body reduces the scattering at the beam line and therefore improves the lateral fall-off. Bragg curve measurements of ion beams passing through different porous materials have been performed in order to determine the beam modulation effect of each. A mathematical model describing the correlation between the mean material density, the porous pore structure size and the strength of the modulation has been developed and a new material parameter called ‘modulation power’ is defined as the square of the Gaussian sigma divided by the mean water-equivalent thickness of the porous absorber. Monte Carlo simulations have been performed in order to validate the model and to investigate the Bragg peak enlargement, the scattering effects of porosity and the lateral beam width at the end of the beam range. The porosity is found to only influence the lateral scattering in a negligible way. As an example of a practical application, it is found that a 20 mm and 50 mm plate of Gammex LN300 performs similar to a 3 mm and 6 mm ripple filter, respectively, and at the same time can improve the sharpness of the lateral beam due to its multifunctionality as a ripple filter and a range shifter.
Calibration of thermocouple psychrometers and moisture measurements in porous materials
Guz, Łukasz; Sobczuk, Henryk; Połednik, Bernard; Guz, Ewa
2016-07-01
The paper presents in situ method of peltier psychrometric sensors calibration which allow to determine water potential. Water potential can be easily recalculated into moisture content of the porous material. In order to obtain correct results of water potential, each probe should be calibrated. NaCl salt solutions with molar concentration of 0.4M, 0.7M, 1.0M and 1.4M, were used for calibration which enabled to obtain osmotic potential in range: -1791 kPa to -6487 kPa. Traditionally, the value of voltage generated on thermocouples during wet-bulb temperature depression is calculated in order to determine the calibration function for psychrometric in situ sensors. In the new method of calibration, the field under psychrometric curve along with peltier cooling current and duration was taken into consideration. During calibration, different cooling currents were applied for each salt solution, i.e. 3, 5, 8 mA respectively, as well as different cooling duration for each current (from 2 to 100 sec with 2 sec step). Afterwards, the shape of each psychrometric curve was thoroughly examined and a value of field under psychrometric curve was computed. Results of experiment indicate that there is a robust correlation between field under psychrometric curve and water potential. Calibrations formulas were designated on the basis of these features.
Fractal Model for Acoustic Absorbing of Porous Fibrous Metal Materials
Directory of Open Access Journals (Sweden)
Weihua Chen
2016-01-01
Full Text Available To investigate the changing rules between sound absorbing performance and geometrical parameters of porous fibrous metal materials (PFMMs, this paper presents a fractal acoustic model by incorporating the static flow resistivity based on Biot-Allard model. Static flow resistivity is essential for an accurate assessment of the acoustic performance of the PFMM. However, it is quite difficult to evaluate the static flow resistivity from the microstructure of the PFMM because of a large number of disordered pores. In order to overcome this difficulty, we firstly established a static flow resistivity formula for the PFMM based on fractal theory. Secondly, a fractal acoustic model was derived on the basis of the static flow resistivity formula. The sound absorption coefficients calculated by the presented acoustic model were validated by the values of Biot-Allard model and experimental data. Finally, the variation of the surface acoustic impedance, the complex wave number, and the sound absorption coefficient with the fractal dimensions were discussed. The research results can reveal the relationship between sound absorption and geometrical parameters and provide a basis for improving the sound absorption capability of the PFMMs.
Analysis of ignition of a porous energetic material
Energy Technology Data Exchange (ETDEWEB)
Telengator, A.M.; Williams, F.A. [Univ. of California, San Diego, La Jolla, CA (United States). Dept. of Applied Mechanics and Engineering Sciences; Margolis, S.B. [Sandia National Labs., Livermore, CA (United States). Combustion Research Facility
1998-04-01
A theory of ignition is presented to analyze the effect of porosity on the time to ignition of a semi-infinite porous energetic solid subjected to a constant energy flux. An asymptotic perturbation analysis, based on the smallness of the gas-to-solid density ratio and the largeness of the activation energy, is utilized to describe the inert and transition stages leading to thermal runaway. As in the classical study of a nonporous solid, the transition stage consists of three spatial regions in the limit of large activation energy: a thin reactive-diffusive layer adjacent to the exposed surface of the material where chemical effects are first felt, a somewhat thicker transient-diffusive zone, and finally an inert region where the temperature field is still governed solely by conductive heat transfer. Solutions in each region are constructed at each order with respect to the density-ratio parameter and matched to one another using asymptotic matching principles. It is found that the effects of porosity provide a leading-order reduction in the time to ignition relative to that for the nonporous problem, arising from the reduced amount of solid material that must be heated and the difference in thermal conductivities of the solid and gaseous phases. A positive correction to the leading-order ignition-delay time, however, is provided by the convective flow of gas out of the solid, which stems from the effects of thermal expansion and removes energy from the system. The latter phenomenon is absent from the corresponding calculation for the nonporous problem and produces a number of modifications at the next order in the analysis arising from the relative transport effects associated with the gas flow.
National Research Council Canada - National Science Library
KAMEGAWA, Takashi; KUWAHARA, Yasutaka; YAMASHITA, Hiromi
2016-01-01
... with additional functions. This review mainly describes our recent investigations on the design of TiO2-loaded porous siliceous materials for application to photocatalytic environmental purification via efficient adsorption...
POROUS POWDER MATERIALS WITH INCREASED EFFICIENCY OF LIQUID AND GAS ENVIRONMENTS
Directory of Open Access Journals (Sweden)
M. V. Tumilovich
2011-01-01
Full Text Available New processes of creation of the porous powder materials, filtering elements and devices on their basis for increase of efficiency of clearing, deironing, desalting, disinfection of potable water and other liquids are investigated.
Chemically modified and nanostructured porous silicon as a drug delivery material and device
Anglin, Emily Jessica
This thesis describes the fabrication, chemical modification, drug release, and toxicity studies of nanostructured porous silicon for the purposes of developing a smart drug delivery device. The first chapter is an introductory chapter, presenting the chemical and physical properties of porous silicon, the concepts and issues of current drug delivery devices and materials, and how porous silicon can address the issues regarding localized and controlled drug therapies. The second chapter discusses chemical modifications of nanostructured porous Si for stabilizing the material in biologically relevant media while providing an extended release of a therapeutic in vitro. This chapter also demonstrates the utility of the porous silicon optical signatures for effectively monitoring drug release from the system and its applications for development of a self-reporting drug delivery device. In chapter three, the concept of providing a triggered release of a therapeutic from porous silicon microparticles through initiation by an external stimulus is demonstrated. The microparticles are chemically modified, and the release is enhanced by a short application of ultrasound to the particulate system. The effect of ultrasound on the drug release and particle size is discussed. Chapter four presents a new method for sustaining the release of a monoclonal antibody from the porous matrix of porous SiO2. The therapeutic is incorporated into the films through electrostatic adsorption and a slow release is observed in vitro. A new method of quantifying the extent of drug loading is monitored with interferometry. The last chapter of the thesis provides a basic in vivo toxicity study of various porous Si microparticles for intraocular applications. Three types of porous Si particles are fabricated and studied in a rabbit eye model. The toxicity studies were conducted by collaborators at the Shiley Eye Center, La Jolla, CA. This work, demonstrates the feasibility of developing a self
Directory of Open Access Journals (Sweden)
Xiaopeng Wang
2015-05-01
Full Text Available Porous metal materials are widely used in noise control with high sound pressure applications such as aircraft engine liners and combustion chambers for rocket engines due to their excellent performance of sound absorption characteristics and distinguished advantages in heat resistance, lightness, and stiffness. Understanding the effect of sound pressure on the acoustic properties of these materials is crucial when attempting to predict silencer performance. In this article, we experimentally investigate the sound absorption characteristics of porous metal materials at high sound pressure level. The effects of material parameters on the sound absorption characteristics of porous metal materials under high sound pressure level are further explored experimentally. Measurements are carried out by using a standard impedance tube that has been modified to accommodate sound pressure level of up to 150 dB. The experimental results show that with the increase in sound pressure level, the effect of sound pressure level on the sound absorption characteristics yields different variation regularities in different frequencies. The sound absorption performance of porous metal materials increases with the increase in sound pressure level in low frequency, which is reasonably consistent with the theoretical results. Under high sound pressure level, the sound absorption characteristics are significantly dependent upon the material parameters such as the metal fiber diameter, the material porosity, and the material thickness. It could provide a reliable experimental validation for the applications of porous metal materials in the area of vibration and noise control at high sound pressure levels.
Kaija, A R; Wilmer, C E
2017-09-08
Designing better porous materials for gas storage or separations applications frequently leverages known structure-property relationships. Reliable structure-property relationships, however, only reveal themselves when adsorption data on many porous materials are aggregated and compared. Gathering enough data experimentally is prohibitively time consuming, and even approaches based on large-scale computer simulations face challenges. Brute force computational screening approaches that do not efficiently sample the space of porous materials may be ineffective when the number of possible materials is too large. Here we describe a general and efficient computational method for mapping structure-property spaces of porous materials that can be useful for adsorption related applications. We describe an algorithm that generates random porous "pseudomaterials", for which we calculate structural characteristics (e.g., surface area, pore size and void fraction) and also gas adsorption properties via molecular simulations. Here we chose to focus on void fraction and Xe adsorption at 1 bar, 5 bar, and 10 bar. The algorithm then identifies pseudomaterials with rare combinations of void fraction and Xe adsorption and mutates them to generate new pseudomaterials, thereby selectively adding data only to those parts of the structure-property map that are the least explored. Use of this method can help guide the design of new porous materials for gas storage and separations applications in the future.
Energy Technology Data Exchange (ETDEWEB)
Ilincic, N. [Univ. of California, La Jolla, CA (United States). Dept. of Applied Mechanics and Engineering Sciences; Margolis, S.B. [Sandia National Labs., Livermore, CA (United States)
1996-07-01
Analytical and numerical calculations of the structure and burning rate of a deflagrating porous energetic material are presented for the limiting case of merged condensed and gas-phase reaction zones. The reaction scheme is modeled by a global two-step mechanism, applicable to certain types of degraded nitramine propellants and consisting of sequential condensed and gaseous steps. Taking into account important effects due to multiphase flow and exploiting the limit of large activation energies, a theoretical analysis may be developed based on activation-energy asymptotics. For steady, planar deflagration, this leads to an eigenvalue problem for the inner reaction-zone, the solution of which determines the burning rate. Numerical solutions give a reasonably complete description of the dependence of the structure and burning rate on the various parameters in the problem, and show excellent agreement with analytical results that are obtained in a more limited parameter regime in which most of the heat release is produced by the condensed-phase reaction and the porosity of the solid is small. These calculations indicate the significant influences of two-phase flow and the multiphase, multi-step chemistry on the deflagration structure and the burning rate, and thus serve to define an important parameter regime that supports the intrusion of the primary gas flame into the two-phase condensed decomposition region at the propellant surface.
Bacteria transport through porous material: Final technical report
Energy Technology Data Exchange (ETDEWEB)
Yen, T.F.
1989-02-13
The injection and penetration of bacteria into a reservoir is the most problematic and crucial of the steps in microbial enhanced recovery (MEOR). In the last phase of our work valuable information on bacterial transport in porous media was obtained. A great deal of progress was made to determine chemical bonding characteristics between adsorbed bacteria and the rock surfaces. In order to further enhance our knowledge of the effects of surface tensions on bacteria transport through porous media, a new approach was taken to illustrate the effect of liquid surface tension on bacterial transport through a sandpack column. Work in surface charge characterization of reservoir rock as a composite oxide system was also accomplished. In the last section of this report a mathematical model to simulate the simultaneous diffusion and growth of bacteria cells in a nutrient-enriched porous media is proposed.
Study on β-TCP Coated Porous Mg as a Bone Tissue Engineering Scaffold Material
Institute of Scientific and Technical Information of China (English)
Fang Geng; Lili Tan; Bingchun Zhang; Chunfu Wu; Yonglian He; Jingyu Yang; Ke Yang
2009-01-01
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive β-tricalcium phosphate (β-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility, and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β-TCP coated porous Mg, which indicates that the β-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
A novel method to determine effective thermal conductivity of porous materials
Institute of Scientific and Technical Information of China (English)
无
2004-01-01
［1］Bhattacharya, A., Calmidi, V. V., Mahajan, R. L., Thermophysical properties of high porosity metal foams, Int. J. of Heat and Mass Transfer, 2002, 45: 1017-1031.［2］Whitaker, S., The Method of Volume Averaging, Boston: Kluwer Academic Press, 1999.［3］Paek, J. W., Kang, B. H., Kim, S. Y. et al., Effective thermal conductivity and permeability of aluminum foam materials, Int. J. Thermophys., 2000, 21: 453-464.［4］Calmidi, V. V., Mahajan, R. L., The effective thermal conductivity of high porosity metal foams, ASME J. Heat Transfer, 1999, 121: 466-471.［5］Boomsma, K., Poulikakos, D., On the effective thermal conductivity of a three dimensionally structured fluid-saturated metal foam, Int. J. Heat and Mass Transfer, 2001, 44: 827-836.［6］Guo Zhaoli, Zheng Chuguang, Lattice Boltzmann Method for Hydrodynamics, WuHan: HuBei Science & Technology Publisher, 2002.［7］Palmer, B. J., Rector, D. R., Lattice-Boltzmann algorithm for simulating thermal two-phase flow, Physical Review E, 2000, 61(5): R5295.［8］Alexander, F. J., Chen, S., Sterling, J. D., Lattice Boltzmann thermohydrodynamics, Physical Review E, 1993, 47: R2294.［9］Liu Muren, Chen Ruohang, Kong Lingjiang, A lattice Boltzmann method for two-dimensional convection-diffusion equation, Acta Physica Sinica, 1999, 48: 1800-1804.［10］Manwart, C., Aaltosalmi, U., Koponen, A. et al., Lattice-Boltzmann and finite-difference simulations for the permeability for three-dimensional porous media, Physical Review E, 2002, 66: R016702.
High Strain-Rate and Quasi-Static Ductile Failure Mechanisms in Porous Materials
2007-11-02
detailed understanding of the interrelated physical mechanisms that can result in ductile material failure in rate-dependent porous crystalline materials subjected...strains and slip-rates, and hydrostatic stresses on failure paths and ligament damage in face centered cubic (f.c.c.) crystalline materials have been
Nanocasting of 3D Porous Materials by Melt Infiltration
DEFF Research Database (Denmark)
Li, Tao; Ndoni, Sokol
Nano-porous cross-linked polybutadiene has been used as the template which has good wetting properties with various inorganic precursors. A novel and facile nanocasting process has been developed to fabricate of a thin film with 10-nm wide titania and Tin Dioxide network which is compact, inter...
Method for the preparation of ferrous low carbon porous material
Energy Technology Data Exchange (ETDEWEB)
Miller, Curtis Jack
2014-05-27
A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.
Method for the preparation of ferrous low carbon porous material
Miller, Curtis Jack
2014-05-27
A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.
Lee, Juliana T Y; Chow, King L; Wang, Kefeng; Tsang, Wai-Hung
2011-11-08
Porous materials are highly preferred for bone tissue engineering due to space for blood vessel ingrowth, but this may introduce extra experimental variations because of the difficulty in precise control of porosity. In order to decide whether it is absolutely necessary to use porous materials in in vitro comparative osteogenesis study of materials with different chemistries, we carried out osteoinductivity study using C3H/10T1/2 cells, pluripotent mesenchymal stem cells (MSCs), on seven material types: hydroxyapatite (HA), α-tricalcium phosphate (α-TCP) and b-tricalcium phosphate (β-TCP) in both porous and dense forms and tissue culture plastic. For all materials under test, dense materials give higher alkaline phosphatase gene (Alp) expression compared with porous materials. In addition, the cell density effects on the 10T1/2 cells were assessed through alkaline phosphatase protein (ALP) enzymatic assay. The ALP expression was higher for higher initial cell plating density and this explains the greater osteoinductivity of dense materials compared with porous materials for in vitro study as porous materials would have higher surface area. On the other hand, the same trend of Alp mRNA level (HA > β-TCP > α-TCP) was observed for both porous and dense materials, validating the use of dense flat materials for comparative study of materials with different chemistries for more reliable comparison when well-defined porous materials are not available. The avoidance of porosity variation would probably facilitate more reproducible results. This study does not suggest porosity is not required for experiments related to bone regeneration application, but emphasizes that there is often a tradeoff between higher clinical relevance, and less variation in a less complex set up, which facilitates a statistically significant conclusion. Technically, we also show that the base of normalization for ALP activity may influence the conclusion and there may be ALP activity from
Directory of Open Access Journals (Sweden)
Zaiku Xie
2010-05-01
Full Text Available Catalysts are important to the chemical industry and environmental remediation due to their effective conversion of one chemical into another. Among them, composite catalysts have attracted continuous attention during the past decades. Nowadays, composite catalysts are being used more and more to meet the practical catalytic performance requirements in the chemical industry of high activity, high selectivity and good stability. In this paper, we reviewed our recent work on development of composite catalysts, mainly focusing on the composite catalysts obtained from porous materials such as zeolites, mesoporous materials, carbon nanotubes (CNT, etc. Six types of porous composite catalysts are discussed, including amorphous oxide modified zeolite composite catalysts, zeolite composites prepared by co-crystallization or overgrowth, hierarchical porous catalysts, host-guest porous composites, inorganic and organic mesoporous composite catalysts, and polymer/CNT composite catalysts.
The heat science of the nano-porous materials; La thermique des materiaux nanoporeux
Energy Technology Data Exchange (ETDEWEB)
Volz, S. [CNRS, Lab. d' Energetique Moleculaire et Macroscopique, Combustion, 92 - Chatenay Malabry (France); Quintard, M. [CNRS, Institut de Mecanique des Fluides, 31 - Toulouse (France); Rochais, D. [CEA Centre d' Etudes du Ripault, Lab. Microstructures et Comportements, 37 - Tours (France); Enguehard, F. [CEA Centre d' Etudes du Ripault, Lab. Ingenierie des Materiaux Optiques, 37 - Tours (France); Domingues, G. [Ecole Nationale Superieure de Mecanique et d' Aerotechnique (ENSMA), Lab. d' Etudes Thermiques, 86 - Poitiers (France); Quenard, D. [CSTB, Div. Caracterisation Physique des Materiaux, 38 - Grenoble (France); Rigacci, A. [Ecole des Mines de Paris, Centre Energetique et Procedes, 75 - Paris (France); Bourdin, V. [CNRS, Lab. d' Informatique pour la Mecanique et les Sciences pour l' Ingenieur, 91 - Orsay (France); Chantrenne, P. [Centre de Thermique de Lyon, INSA, 69 - Lyon (France)
2005-07-01
In this work are gathered the transparencies of the lecture presented at the conference 'the heat science of the nano-porous materials'. The titles of the different lectures are: 1)modelling of the transfers in nano-porous media 2)modelling of the transfers inside nano-porous super-insulators part I: conduction part II: radiation 3)heat transfers between two silicon oxide nano-crystallite 4)thermo-physical properties of two pyro-micro-nano-porous silicon oxides: humidity and temperature effect 5)adsorption kinetics by a thermal frequency method: an indirect measurement method of the effective conductivity of the granulated adsorbents 6)the aerogels materials: nano-structured thermal super-insulators 7)anticipation of the nano-structured silicon thermal conductivity. (O.M.)
Karmakar, Avishek; Illathvalappil, Rajith; Anothumakkool, Bihag; Sen, Arunabha; Samanta, Partha; Desai, Aamod V; Kurungot, Sreekumar; Ghosh, Sujit K
2016-08-26
Two porous hydrogen-bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra-high proton conduction values (σ) 0.75× 10(-2) S cm(-1) and 1.8×10(-2) S cm(-1) under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic-based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen-bonded porous organic frameworks as solid-state proton conducting materials.
Preparation and characterizations of heat storage material combining porous metal with molten salt
Institute of Scientific and Technical Information of China (English)
王华; 何方; 戴永年; 胡建杭
2003-01-01
A new type of heat storage materials combining high temperature molten salts phases change latent heat thermal storage materials, PCM with porous metals sensible heat thermal storage materials was developed. The process was expressed as following: firstly, it is necessary to heat up the molten salts phases change materials to molten; and then the porous metals are put into the molten bath; after being held for 1-3 h, the composite heat thermal storage materials lumps are taken out of the molten bath and cooled to atmospheric temperature; the last step is to electrodeposit a layer metal coat on the surface of the material lumps. The new type of heat storage material integrates the advantages of both solid sensible heat thermal storage materials and high temperature phases change latent heat thermal storage materials. The metal-base heat storage materials enjoy some favorable characteristics such as higher heat charge-discharge rate, higher heat storage density and better mechanical strength.
Detecting alpha radiation by scintillation in porous materials
Energy Technology Data Exchange (ETDEWEB)
Keillor, M.E. [McClellan Central Lab., McClellan AFB, CA (United States); Burggraf, L.W. [Air Force Inst. of Tech., Wright-Patterson AFB, OH (United States)
1997-10-01
This paper presents a study of some parameters essential to the development of a heterogeneous scintillation detector with improved alpha energy resolution and detection efficiency. Such a detector with better than 10% alpha energy resolution could provide in situ capability to identify and quantify important alpha-emitting radionuclides in dilute aqueous solutions. Nanoporous gel-silica is a potential scintillation matrix with the promise of improved energy resolution and 100% detection efficiency. Scintillating gel-silica made by a sol-gel process is under development. As a step toward realizing the system described, the dependence of alpha detection efficiency and intrinsic energy resolution in particulate and porous glass scintillation detectors is examined. The two main areas of this research are: (1) computer modeling of the geometric detection efficiency and energy dispersion in particulate and porous glass scintillation detectors and (2) experiments to test model predictions for detection of alphas in liquid-infiltrated porous glass structures. To confirm the predicted alpha energy deposition, the authors measured scintillation in nanoporous gel-silica infiltrated with an organic liquid scintillator. Results show that phase dimensions must be considered in constructing a heterogeneous detector for alpha spectroscopy. Nanometer-scale dimensions available in gel-silica essentially eliminate degradation of energy resolution due to energy dispersion of alpha particles within the liquid sample, while providing 100% detection efficiency.
Effects of Forming Pressure on the Porosity of Polyimide Porous Materials
Institute of Scientific and Technical Information of China (English)
PU Yu-ping; L(U) Guang-shu; ZHAO Peng; XIAO Han-cheng
2008-01-01
Based on a series of experiments,the theory of relationship between normal pressure and pores' characters fit for polymer was set up for the first time.On the study of relation between normal pressure and porosity,experience model of polyimide porous materials was proposed which is similar to the traditional experience model of the metal porous material.While being pressed.polyimide was found soon to come into elastoplastic deformation progress in this paper,so the theory model of metal porous material based on Hooker's law Was not fit for the polymer any more.A new elasto-plastic deformation and exhausting model is proposed which shows better agreement with polymer material's pressing process.
Hydrothermal Treatment of Tannin: A Route to Porous Metal Oxides and Metal/Carbon Hybrid Materials
Directory of Open Access Journals (Sweden)
Flavia L. Braghiroli
2017-01-01
Full Text Available In the present paper, porous materials were prepared from the hydrothermal treatment of aqueous solutions of tannin, a renewable phenolic resource extracted from tree barks, containing dissolved salts of transition metals: V, Cr, Ni and Fe. Hydrothermal treatment produced carbonaceous particles doped with the aforementioned metals, and such materials were treated according to two different routes: (i calcination in air in order to burn the carbon and to recover porous oxides; (ii pyrolysis in inert atmosphere so as to recover porous metal/carbon hybrid materials. The nature of the metal salt was found to have a dramatic impact on the structure of the materials recovered by the first route, leading either to nano-powders (V, Cr or to hollow microspheres (Ni, Fe. The second route was only investigated with iron, leading to magnetic Fe-loaded micro/mesoporous carbons whose texture, pore volumes and surface areas gradually changed with the iron content.
Energy Technology Data Exchange (ETDEWEB)
Ogawa, Seiya [Course of Mechanical Engineering, Graduate School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan); Masuko, Yuki; Kato, Hirokazu; Yuyama, Hayato; Sakai, Yutaro [Department of Prime Mover Engineering, School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan); Niwa, Eiki; Hashimoto, Takuya [Department of Physics, College of Humanities and Sciences, Nihon University, 3-8-1 Sakurajousui, Setagaya-ku, Tokyo 156-8550 (Japan); Mukai, Keisuke [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo, 7-3-1 Bunkyo-ku, Tokyo 113-8656 (Japan); Hosino, Tsuyoshi [Breeding Functional Materials Development Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan); Sasaki, Kazuya, E-mail: k_sasaki@tokai-u.jp [Course of Mechanical Engineering, Graduate School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan); Department of Prime Mover Engineering, School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan); Course of Mechanical Engineering and Aeronautics and Astronautics, Graduate School of Science and Technology, Tokai University, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan)
2015-10-15
Highlights: • We synthesized two phase materials based on Li{sub 2}SiO{sub 3} and Li{sub 2}TiO{sub 3}. • We investigated the Li vaporization property of the two-phase materials. • Li vaporization occurs significantly from only Li{sub 2}SiO{sub 3} grains in the vicinity of the surface of the pellets. • The Li vaporization is remarkable only for an early short time for the vaporization from Li{sub 2}SiO{sub 3} grains at the vicinity of the surface. • The second stable phase added functions effectively for inhibition of the Li vaporization. - Abstract: Li vaporization property of two-phase materials of Li{sub 2}TiO{sub 3} and Li{sub 2}SiO{sub 3} in a working condition for the solid tritium breeder used in the demonstration power plant of fusion reactor was investigated, and the suppression mechanism of the vaporization was considered. The Li vaporization rate from the specimen pellet was measured by gravimetric method, and the change of Li concentration distribution in the pellet was analyzed by time-of-flight secondary ion mass spectrometer. Li was vaporized only from the Li{sub 2}SiO{sub 3} at the vicinity of the surface of the pellet. The remarkable vaporization of Li arose only in an early short time. The inhibition of the vaporization from the Li{sub 2}SiO{sub 3} was successful by adding the small amount of the stable secondary phase of Li{sub 2}TiO{sub 3}.
DEFF Research Database (Denmark)
Skibsted, Gry
of porous stone materials to hinder decay. However, in addition to the removal of target ions in these systems, matrix changes may occur during the electrochemical treatment. For a broader implementation of the electrokinetic methods it is important to understand changes in the matrix composition...... for different types of materials. The overall aim of this PhD-project is to evaluate matrix changes and side effects induced by electrokinetic treatment of porous and particulate materials.During electro-remediation protons are produced at the anode and hydroxyl ions are produced at the cathode. The consequent...
Adsorption of graphene oxide/chitosan porous materials for metal ions
Institute of Scientific and Technical Information of China (English)
Yong Qiang He; Na Na Zhang; Xiao Dong Wang
2011-01-01
Porous graphene oxide/chitosan (PGOC) materials were prepared by a unidirectional freeze-drying method. Their porous structure, mechanical property and adsorption for metal ions were investigated. The results show that the incorporation of graphene oxide (GO) significantly increased the compressive strength of the PGOC materials. The saturated adsorption capacity of Pb2+ increased about 31%, up to 99 mg/g when 5 wt% GO was incorporated These biodegradable, nontoxic, efficient PGOC materials will be a potential adsorbent for metal ions in aqueous solution.
On the Acoustic Absorption of Porous Materials with Different Surface Shapes and Perforated Plates
CHEN, WEN-HWA; LEE, FAN-CHING; CHIANG, DAR-MING
2000-10-01
In architectural acoustic design, perforated plates are often used to protect porous materials from erosion. Although porous materials are usually applied to passive noise control, the effects of their surface shapes are seldom studied. To study the acoustic absorption of porous materials with different surface shapes and perforated plates, an efficient finite element procedure, which is derived by the Galerkin residual method and Helmholtz wave propagation equation, is used in this work. The two-microphone transfer function method and the modified Ingard and Dear impedance tube testing system are employed to measure the parameters deemed necessary for the finite element analysis, such as complex wave propagation constant, characteristic impedance and flow resistivity. For verifying the finite element results, the two-microphone transfer function method is also applied to measure the absorption coefficients of the discussed acoustic absorbers. Four surface shapes of commercially available porous materials, i.e., triangle, semicircle, convex rectangle and plate shapes, are chosen for analysis. The porosity of perforated plates is then evaluated. Finally, the distinct effect of the flow resistivity of porous materials on the acoustic absorption is demonstrated.
Synthesis and gas adsorption study of porous metal-organic framework materials
Mu, Bin
Metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) have become the focus of intense study over the past decade due to their potential for advancing a variety of applications including air purification, gas storage, adsorption separations, catalysis, gas sensing, drug delivery, and so on. These materials have some distinct advantages over traditional porous materials such as the well-defined structures, uniform pore sizes, chemically functionalized sorption sites, and potential for postsynthetic modification, etc. Thus, synthesis and adsorption studies of porous MOFs have increased substantially in recent years. Among various prospective applications, air purification is one of the most immediate concerns, which has urgent requirements to improve current nuclear, biological, and chemical (NBC) filters involving commercial and military purposes. Thus, the major goal of this funded project is to search, synthesize, and test these novel hybrid porous materials for adsorptive removal of toxic industrial chemicals (TICs) and chemical warfare agents (CWAs), and to install the benchmark for new-generation NBC filters. The objective of this study is three-fold: (i) Advance our understanding of coordination chemistry by synthesizing novel MOFs and characterizing these porous coordination polymers; (ii) Evaluate porous MOF materials for gasadsorption applications including CO2 capture, CH4 storage, other light gas adsorption and separations, and examine the chemical and physical properties of these solid adsorbents including thermal stability and heat capacity of MOFs; (iii) Evaluate porous MOF materials for next-generation NBC filter media by adsorption breakthrough measurements of TICs on MOFs, and advance our understanding about structureproperty relationships of these novel adsorbents.
New dielectric mixture equation for porous materials based on depolarization factors
Hilhorst, M.A.; Dirksen, C.; Kampers, F.W.H.; Feddes, R.A.
2001-01-01
A change in the relative proportions of the constituents of a porous material like soil will cause a change in its electrical permittivity. The measured permittivity reflects the impact of the permittivities of the individual material constituents. Numerous dielectric mixture equations are
Atmospheric methane removal by methane-oxidizing bacteria immobilized on porous building materials
Ganendra, G; De Muynck, W; Ho, A.; Hoefman, S.; De Vos, P.; Boeckx, P.; Boon, N.
2014-01-01
Biological treatment using methane-oxidizing bacteria (MOB) immobilized on six porous carrier materials have been used to mitigate methane emission. Experiments were performed with different MOB inoculated in building materials at high (similar to 20 % (v/v)) and low (similar to 100 ppmv) methane
Numerical study of thermally stratified flows of a fluid overlying a highly porous material
Antoniadis, Panagiotis D.; Papalexandris, Miltiadis V.
2014-11-01
In this talk we are concerned with thermally stratified flows in domains that contain a macroscopic interface between a highly porous material and a pure-fluid domain. Our study is based on the single-domain approach according to which the same set of governing equations is employed both inside the porous medium and in the pure-fluid domain. Also, the mathematical model that we employ treats the porous skeleton as a rigid solid that is in thermal non-equilibrium with the fluid. First, we present briefly the basic steps of the derivation of the mathematical model. Then, we present and discuss numerical results for both thermally stratified shear flows and natural convection. Our discussion focuses on the role of thermal stratification on the flows of interest and on the effect of thermal non-equilibrium between the solid matrix and the fluid inside the porous medium. This work is supported by the National Fund for Scientific Research (FNRS), Belgium.
Study of Porous Materials Acoustic Signatures Behaviour in Dark Field
Energy Technology Data Exchange (ETDEWEB)
Bouhedja, S; Hamdi, F [Laboratoires des Hyperfrequences et Semi-conducteurs, Universite de Constantine, B.P. 125, DZ-25000 (Algeria); Doghmane, A; Hadjoub, Z, E-mail: bouhedja_samia@yahoo.fr, E-mail: a_doghmane@yahoo.fr [Laboratoire des Semi-Conducteurs, Departement de Physique, Faculte des Sciences, Universite Badji-Mokhtar, BP 12, Annaba, DZ-23000 (Algeria)
2011-03-01
Several kinds of lens-transducer system exist in the scanning acoustic microscope. In this work, annular lenses are chosen in order to quantify the occultation limiting angle to suppress Rayleigh mode generation. Hence, we have numerically simulated, through variable occultation of generated rays at the lens center, the porous silicon acoustic signatures at an operating frequency of 142 MHz. In non destructive control, this investigation is of a great importance in the measurement of the surface waves attenuation. The obtained results enabled us to evaluate the maximum relative occultation at Rayleigh waves.
Inclusion of thiazyl radicals in porous crystalline materials.
Potts, Storm V; Barbour, Leonard J; Haynes, Delia A; Rawson, Jeremy M; Lloyd, Gareth O
2011-08-24
The incorporation of benzodithiazolyl (BDTA) and methylbenzodithiazolyl (MBDTA) radicals into porous hybrid frameworks via gas phase diffusion revealed that inclusion appeared selective for the MIL53(Al) framework against a range of other potential hosts. Both PXRD and EPR studies are consistent with retention of a π*-π* dimer motif for BDTA in MIL53(Al)@BDTA whereas MBDTA in MIL53(Al)@MBDTA appears to be monomeric. The guests are readily released by the addition of solvent (CH(2)Cl(2)).
Energy Technology Data Exchange (ETDEWEB)
Stuerzel, Thilo
2013-04-15
An ultrafast X-ray computed tomography system has been devised, which enables two- and three-dimensional imaging using a scanned electron beam. Therefore the electron beam is focused on a specially designed X-ray transparent target to generate a fast moving X-ray source following the cone-beam tomography principles. The maximum frame rate of the system is 10 kHz for two-dimensional scanning and 1,25 kHz for three-dimensional scanning. Phantom experiments proved a spatial resolution of 1.5 mm for the applied 3D frame rate of 250 Hz. As the spatial resolution is influenced by the chosen frame rate, it can be flexibly adjusted to the measurement demands. A higher spatial resolution is achieved for a reduced temporal resolution. Experiments with two-phase flows in debris beds were performed for mono-dispersed beds of spherical particles. For the identification and detection of the flow regimes bubbly, slug and annular flow geometry and stability criteria were defined. It was found that bubbly and slug flow appear simultaneously, whereas the gas transport basically performed via slug flow. This may be caused by the isothermal character of the air water flow. Applying the stability criteria a clear transition into the annular flow regime could be detected. Hence it was possible to validate the dependence of this transition on the particle diameter, as already supposed in literature.
Phase Transformation Dynamics in Porous Battery Electrodes
Ferguson, Todd R
2014-01-01
Porous electrodes composed of multiphase active materials are widely used in Li-ion batteries, but their dynamics are poorly understood. Two-phase models are largely empirical, and no models exist for three or more phases. Using a modified porous electrode theory based on non-equilibrium thermodynamics, we show that experimental phase behavior can be accurately predicted from free energy models, without artificially placing phase boundaries or fitting the open circuit voltage. First, we simulate lithium intercalation in porous iron phosphate, a popular two-phase cathode, and show that the zero-current voltage gap, sloping voltage plateau and under-estimated exchange currents all result from size-dependent nucleation and mosaic instability. Next, we simulate porous graphite, the standard anode with three stable phases, and reproduce experimentally observed fronts of color-changing phase transformations. These results provide a framework for physics-based design and control for electrochemical systems with comp...
Energy Technology Data Exchange (ETDEWEB)
Elsaidi, Sameh K.; Mohamed, Mona H.; Loring, John S.; McGrail, Bernard. Pete; Thallapally, Praveen K.
2016-10-26
The synthetic approaches for fine-tuning the structural properties of coordination polymers or metal organic frameworks have exponentially grown during the last decade. This is due to the control over the properties of the resulting structures such as stability, pore size, pore chemis-try and surface area for myriad possible applications. Herein, we present a new class of porous materials called Covalent Coordination Frameworks (CCFs) that were designed and effectively synthesized using a two-step reticular chemistry approach. During the first step, trigonal prismatic molecular building block was isolated using 4-aminobenazoic acid and Cr (III) salt, subsequently in the second step the polymerization of the isolated molecular building blocks (MBBs) takes place by the formation of strong covalent bonds where small organic molecules can connect the MBBs forming extended porous CCF materials. All the isolated CCFs were found to be permanently porous while the discrete MBB were non-porous. This approach would inevitably open a feasible path for the applications of reticular chemistry and the synthesis of novel porous materials with various topologies under ambient conditions using simple organic molecules and versatile MBBs with different functionalities which would not be possible using the traditional one step approach
Synthesis and degradation properties of -TCP/BG porous composite materials
Indian Academy of Sciences (India)
Fan Xin; Chen Jian; Ruan Jianming; Zhou Zhongcheng; Zou Jianpeng
2011-04-01
-TCP/BG porous composite materials were successfully fabricated by foaming technology. X-ray diffraction was used to determine the crystal structure of powders. The pore size and distribution of the resulting materials were characterized using scanning electron microscopy. The porosity and degradation performance of materials were also investigated. The results showed that the porous composite materials possessed the pore size ranging from 100 to 500 m in diameter, whereas the interconnection among macrospores was poor. The porosity in materials increased from 58.7% to 63.47% with BG content ranging from 0 to 3 wt%, further increasing of BG content results in a decrease in porosity. The degradation rate of composite materials can be adjusted by varying the BG content.
Institute of Scientific and Technical Information of China (English)
覃斌; 李相方; 程时清
2004-01-01
近期的大量理论和实验研究发现,高速流动导致的毛管数和非达西效应对近井油气相对渗透率有显著影响,而目前仅仅考虑非达西效应无法准确描述油气真实渗流状态.如何准确理解并考虑这两种效应的影响对于凝析气藏渗流动态分析以及生产动态预测有很重要的意义.本文建立了油气两相渗流的定解问题,得到了拟稳态形式的流入动态方程.在三区渗流机理上,首次综合考虑了毛管数和非达西效应对相对渗透率的影响.实例分析揭示了高速流动下油气相对渗透率变化及油气分布状态新特征.对不同流入动态模型的对比分析表明,本文方法较之现有方法更有助于正确预测生产动态,评估气井产能.%Retrograde condensation frequently occurs during the development of gas condensate reservoirs. The loss of productivity is often observed due to the reduced relative permeability to gas as condensate accumulates near the well bore region. How to describe the condensate blockage effect exactly has been a continuous research topic. However, up to now, the present methods usually over-estimate or underestimate the productivity reduction due to an incorrect understanding of the mechanism of flow in porous medium, which inevitably results in an inaccurate prediction of production performance.It has been found in recent numerous theoretical and experimental studies that capillary number and non-Darcy flow have significant influence on relative permeability in regions near the well bore. The two effects impose opposite impacts on production performance, thus leading to gas condensate flow showing characteristics different from general understanding. It is significant for prediction of performance in gas condensate wells to understand the two effects exactly.The aim of the paper is to describe and analyze the flow dynamics in porous media accurately during the production of gas condensate reservoirs. Based on the
Salama, Amgad
2013-07-04
The flow of two or more immiscible fluids in porous media is widespread, particularly in the oil industry. This includes secondary and tertiary oil recovery and carbon dioxide (CO2) sequestration. Accurate predictions of the development of these processes are important in estimating the benefits and consequences of the use of certain technologies. However, this accurate prediction depends--to a large extent--on two things. The first is related to our ability to correctly characterize the reservoir with all its complexities; the second depends on our ability to develop robust techniques that solve the governing equations efficiently and accurately. In this work, we introduce a new robust and efficient numerical technique for solving the conservation laws that govern the movement of two immiscible fluids in the subsurface. As an example, this work is applied to the problem of CO2 sequestration in deep saline aquifers; however, it can also be extended to incorporate more scenarios. The traditional solution algorithms to this problem are modeled after discretizing the governing laws on a generic cell and then proceed to the other cells within loops. Therefore, it is expected that calling and iterating these loops multiple times can take a significant amount of computer time. Furthermore, if this process is performed with programming languages that require repeated interpretation each time a loop is called, such as Matlab, Python, and others, much longer time is expected, particularly for larger systems. In this new algorithm, the solution is performed for all the nodes at once and not within loops. The solution methodology involves manipulating all the variables as column vectors. By use of shifting matrices, these vectors are shifted in such a way that subtracting relevant vectors produces the corresponding difference algorithm. It has been found that this technique significantly reduces the amount of central-processing-unit (CPU) time compared with a traditional
Institute of Scientific and Technical Information of China (English)
Jiang Hongyuan; Xia Yuhong; Su Daizhong; Белоусов А И
2005-01-01
The effect of deformation of porous material on infiltrative performance is investigated.Based on Darcy theory and Boit principle, the Reynolds equation and mathematical expression of deformable metal rubber (MR) material under laminar flow are obtained according to the change of porosity of metal rubber. It is shown that the throttle of MR material is dependent on its porosity and diameter of metal wires. It will be of great value for the application of MR in throttle field.
Laser-induced growth of nanocrystals embedded in porous materials
Capoen, Bruno; Chahadih, Abdallah; El Hamzaoui, Hicham; Cristini, Odile; Bouazaoui, Mohamed
2013-06-01
Space localization of the linear and nonlinear optical properties in a transparent medium at the submicron scale is still a challenge to yield the future generation of photonic devices. Laser irradiation techniques have always been thought to structure the matter at the nanometer scale, but combining them with doping methods made it possible to generate local growth of several types of nanocrystals in different kinds of silicate matrices. This paper summarizes the most recent works developed in our group, where the investigated nanoparticles are either made of metal (gold) or chalcogenide semiconductors (CdS, PbS), grown in precursor-impregnated porous xerogels under different laser irradiations. This review is associated to new results on silver nanocrystals in the same kind of matrices. It is shown that, depending on the employed laser, the particles can be formed near the sample surface or deep inside the silica matrix. Photothermal and/or photochemical mechanisms may be invoked to explain the nanoparticle growth, depending on the laser, precursor, and matrix. One striking result is that metal salt reduction, necessary to the production of the corresponding nanoparticles, can efficiently occur due to the thermal wrenching of electrons from the matrix itself or due to multiphoton absorption of the laser light by a reducer additive in femtosecond regime. Very localized semiconductor quantum dots could also be generated using ultrashort pulses, but while PbS nanoparticles grow faster than CdS particles due to one-photon absorption, this better efficiency is counterbalanced by a sensitivity to oxidation. In most cases where the reaction efficiency is high, particles larger than the pores have been obtained, showing that a fast diffusion of the species through the interconnected porosity can modify the matrix itself. Based on our experience in these techniques, we compare several examples of laser-induced nanocrystal growth in porous silica xerogels, which allows
Cooperation of micro- and meso-porous carbon electrode materials in electric double-layer capacitors
Energy Technology Data Exchange (ETDEWEB)
Zheng, Cheng [State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun 130022, Jilin Province (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Qi, Li; Wang, Hongyu [State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun 130022, Jilin Province (China); Yoshio, Masaki [Advanced Research Center, Saga University, 1341 Yoga-machi, Saga 840-0047 (Japan)
2010-07-01
The capacitive characteristics of micro- and meso-porous carbon materials have been compared in cyclic voltammetric studies and galvanostatic charge-discharge tests. Meso-porous carbon can keep certain high capacitance values at high scan rates, whereas micro-porous carbon possesses very high capacitance values at low scan rates but fades quickly as the scan rate rises up. For better performance of electric double-layer capacitors (EDLCs), the cooperative application of both kinds of carbon materials has been proposed in the following two ways: mixing both kinds of carbons in the same electrode or using the asymmetric configuration of carbon electrodes in the same EDLC. The cooperative effect on the electrochemical performance has also been addressed. (author)
Freeze-drying of “pearl milk tea”: A general strategy for controllable synthesis of porous materials
Zhou, Yingke; Tian, Xiaohui; Wang, Pengcheng; Hu, Min; Du, Guodong
2016-05-01
Porous materials have been widely used in many fields, but the large-scale synthesis of materials with controlled pore sizes, pore volumes, and wall thicknesses remains a considerable challenge. Thus, the controllable synthesis of porous materials is of key general importance. Herein, we demonstrate the “pearl milk tea” freeze-drying method to form porous materials with controllable pore characteristics, which is realized by rapidly freezing the uniformly distributed template-containing precursor solution, followed by freeze-drying and suitable calcination. This general and convenient method has been successfully applied to synthesize various porous phosphate and oxide materials using different templates. The method is promising for the development of tunable porous materials for numerous applications of energy, environment, and catalysis, etc.
THEORETICAL MODEL OF EFFECTIVE STRESS COEFFICIENT FOR ROCK/SOIL-LIKE POROUS MATERIALS
Institute of Scientific and Technical Information of China (English)
Kai Zhang; Hui Zhou; Dawei Hu; Yang Zhao; Xiating Feng
2009-01-01
Physical mechanisms and influencing factors on the effective stress coefficient for rock/soil-like porous materials are investigated, based on which equivalent connectivity index is proposed. The equivalent connectivity index, relying on the meso-scale structure of porous ma-terial and the property of liquid, denotes the connectivity of pores in Representative Element Area (REA). If the conductivity of the porous material is anisotropic, the equivalent connec-tivity index is a second order tensor. Based on the basic theories of continuous mechanics and tensor analysis, relationship between area porosity and volumetric porosity of porous materials is deduced. Then a generalized expression, describing the relation between effective stress coeffi-cient tensor and equivalent connectivity tensor of pores, is proposed, and the expression can be applied to isotropic media and also to anisotropic materials. Furthermore, evolution of porosity and equivalent connectivity index of the pore are studied in the strain space, and the method to determine the corresponding functions in expressions above is proposed using genetic algorithm and genetic programming. Two applications show that the results obtained by the method in this paper perfectly agree with the test data. This paper provides an important theoretical support to the coupled hydro-mechanical research.
Preparation and Photocatalytic Property of TiO2/Diatomite-Based Porous Ceramics Composite Materials
Directory of Open Access Journals (Sweden)
Shuilin Zheng
2012-01-01
Full Text Available The diatomite-based porous ceramics was made by low-temperature sintering. Then the nano-TiO2/diatomite-based porous ceramics composite materials were prepared by hydrolysis deposition method with titanium tetrachloride as the precursor of TiO2 and diatomite-based porous as the supporting body of the nano-TiO2. The structure and microscopic appearance of nano-TiO2/diatomite-based porous ceramics composite materials was characterized by XRD and SEM. The photocatalytic property of the composite was investigated by the degradation of malachite green. Results showed that, after calcination at 550°C, TiO2 thin film loaded on the diatomite-based porous ceramics is anatase TiO2 and average grain size of TiO2 is about 10 nm. The degradation ratio of the composite for 5 mg/L malachite green solution reached 86.2% after irradiation for 6 h under ultraviolet.
Dolinska, J.; Chidambaram, A.; Adamkiewicz, W.; Estili, M.; Lisowski, W.; Iwan, M.; Palys, B.; Sudholter, E.J.R.; Marken, F.; Opallo, M.; Rassaei, L.
2016-01-01
Porous carbon nanohybrids are promising materials as high-performance electrodes for both sensing and energy conversion applications. This is mainly due to their high specific surface area and specific physicochemical properties. Here, new porous nanohybrid materials are developed based on exfoliate
Rate dependent rheological stress-strain behavior of porous nanocrystalline materials
Institute of Scientific and Technical Information of China (English)
李慧; 周剑秋
2008-01-01
To completely understand the rate-dependent stress-strain behavior of the porous nanocrystalline materials,it is necessary to formulate a constitutive model that can reflect the complicated experimentally observed stress-strain relations of nanocrystalline materials.The nanocrystalline materials consisting grain interior and grain boundary are considered as viscoplastic and porous materials for the reasons that their mechanical deformation is commonly governed by both dislocation glide and diffusion,and pores commonly exist in the nanocrystalline materials.A constitutive law of the unified theory reflecting the stress-strain relations was established and verified by experimental data of bulk nanocrystalline Ni prepared by hydrogen direct current arc plasma evaporation method and hot compression.The effect of the evolution of porosity on stress-strain relations was taken into account to make that the predicted results can keep good agreements with the corresponding experimental results.
Park, Junhong; Palumbo, Daniel L.
2004-01-01
For application of porous and granular materials to vibro-acoustic controls, a finite dynamic strength of the solid component (frame) is an important design factor. The primary goal of this study was to investigate structural vibration damping through this frame wave propagation for various poroelastic materials. A measurement method to investigate the vibration characteristics of the frame was proposed. The measured properties were found to follow closely the characteristics of the viscoelastic materials - the dynamic modulus increased with frequency and the degree of the frequency dependence was determined by its loss factor. The dynamic stiffness of hollow cylindrical beams containing porous and granular materials as damping treatment was measured also. The data were used to extract the damping materials characteristics using the Rayleigh-Ritz method. The results suggested that the acoustic structure interaction between the frame and the structure enhances the dissipation of the vibration energy significantly.
Theoretical analysis of moisture transport in wood as an open porous hygroscopic material
DEFF Research Database (Denmark)
Hozjan, Tomaz; Svensson, Staffan
2010-01-01
Moisture transport in an open porous hygroscopic material such as wood is a complex system of coupled processes. For seasoned wood in natural climate three fully coupled processes active in the moisture transport are readily identified: (1) diffusion of vapor in pores; (2) phase change from one...
DEFF Research Database (Denmark)
Hansen, Thor; Padfield, Tim; Hansen, Kurt Kielsgaard
2014-01-01
This was an experiment to identify the driving potential for water vapour diffusion through porous materials in a temperature gradient. The specimen of mineral fibre insulation was placed between a space with controlled temperature and relative humidity and a space with a controlled, higher...
Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments
Institute of Scientific and Technical Information of China (English)
无
2008-01-01
A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.
THE RATE-INDEPENDENT CONSTITUTIVE MODELING FOR POROUS AND MULTI-PHASE NANOCRYSTALLINE MATERIAL
Institute of Scientific and Technical Information of China (English)
Zhou Jianqiu; Li Yuanling; Zhang Zhenzhong
2007-01-01
To determine the time-independent constitutive modeling for porous and multiphase nanocrystalline materials and understand the effects of grain size and porosity on their mechanical behavior, each phase was treated as a mixture of grain interior and grain boundary, and pores were taken as a single phase, then Budiansky's self-consistent method was used to calculate the Young's modulus of porous, possible multi-phase, nanocrystalline materials, the prediction being in good agreement with the results in the literature. Further, the established method is extended tosimulate the constitutive relations of porous and possible multi-phase nanocrystalline materials with small plastic deformation in conjunction with the secant-moduli approach and iso-strain assumption. Comparisons between the experimental grain size and porosity dependent mechanical data and the corresponding predictions using the established model show that it appears to be capable of describing the time-independent mechanical behaviors for porous and multi-phase nanocrystalline materials in a small plastic strain range. Further discussion on the modification factor, the advantages and limitations of the model developed were present.
A dynamic experimental study on the evaporative cooling performance of porous building materials
Zhang, Yu; Zhang, Lei; Meng, Qinglin; Feng, Yanshan; Chen, Yuanrui
2017-08-01
Conventional outdoor dynamic and indoor steady-state experiments have certain limitations in regard to investigating the evaporative cooling performance of porous building materials. The present study investigated the evaporative cooling performance of a porous building material using a special wind tunnel apparatus. First, the composition and control principles of the wind tunnel environment control system were elucidated. Then, the meteorological environment on a typical summer day in Guangzhou was reproduced in the wind tunnel and the evaporation process and thermal parameters of specimens composed of a porous building material were continuously measured. Finally, the experimental results were analysed to evaluate the accuracy of the wind tunnel environment control system, the heat budget of the external surface of the specimens and the total thermal resistance of the specimens and its uncertainty. The analysis results indicated that the normalized root-mean-square error between the measured value of each environmental parameter in the wind tunnel test section and the corresponding value input into the environment control system was internal surface of the specimen. Compared to the dry specimen, the total thermal resistance of the wet specimen was approximately doubled, indicating that the evaporation process of the porous building material could significantly improve the thermal insulation performance of the specimen.
PRODUCTION OF POROUS POWDER MATERIALS OF SPHERICAL POWDERS OF CORROSION-RESISTANT STEEL
Directory of Open Access Journals (Sweden)
V. N. Kovalevskij
2012-01-01
Full Text Available Production of porous powder materials from spherical powders of corrosion-resistant steel 12Х18н10Т with formation at low pressures 120–140 mpa in the mold with the subsequent activated sintering became possible due to increase of duration of process of spattering and formation of condensate particles (Si–C or (Mo–Si on surface.
Numerical modelling of porous cement-based materials by superabsorbent polymers
DEFF Research Database (Denmark)
Viejo, Ismael; Esteves, Luis Pedro; Laspalas, Manuel;
2016-01-01
The development of new cementitious materials raises new challenges with regard to structural design. One of the potential applications of superabsorbent polymers (SAP) is to deliver well-defined porosity to cement systems. This is particularly interesting for the development of porous cement...
Directory of Open Access Journals (Sweden)
Pavone D.
2006-11-01
Full Text Available Models of instabilities in porous media usually assume that the capillary pressure (the difference of pressure between the nonwetting and the wetting phase depends on the radii of the macroscopic curvature of the two-phase front. However, this definition is not taken into account for modeling stable immiscible displacements in porous media whenever the heterogeneity of the porous medium may lead to high macroscopic curvature of the front. Before trying to solve flow equations in porous media under unstable conditions, a more accurate and complete set of equations for immiscible two-phase flow in porous media is required. Space averaging of microscopic equations valid at the pore level is used to define variables and equations that link these variables at the macroscopic scale. The thermodynamics of irreversible processes completes the set of equations. If some coupling between the flow of both phases is introduced, the relative permeability equation is proved to be valid, even with moving interfaces. Capillary pressure appears to be twofold; i. e. a static capillary pressure taking into account 1 the amount of interface (Gibbs-Duhem like equation and 2 the area swept by the three-phase lines (Laplace like equation, as well as a dynamic capillary pressure related to fluid inertia. This is the first time that capillary pressure in porous media can be proved to be composed of three terms, each having an evident physical meaning. Under the assumptions of the present paper, the capillary pressure does not depend on macroscopic curvature, therefore. La modélisation des instabilités visqueuses en milieu poreux suppose généralement que la pression capillaire (différence de pression entre la phase mouillante et la phase non mouillante dépend de la courbure du front biphasique. Or, cette dépendance n'est pas envisagée pour des déplacements stables, même quand les hétérogénéités du milieu poreux sont susceptibles d'introduire de grandes
Computational Study of Porous Materials for Gas Separations
Lin, Li-Chiang
2014-01-01
Nanoporous materials such as zeolites, zeolitic imidazolate frameworks (ZIFs), and metal-organic frameworks (MOFs) are used as sorbents or membranes for gas separations such as carbon dioxide capture, methane capture, paraffin/olefin separations, etc. The total number of nanoporous materials is large; by changing the chemical composition and/or the structural topologies we can envision an infinite number of possible materials. In practice one can synthesize and fully characterize only a small...
Characterization of porous acoustic materials applied to lightweight partition walls
Fangueiro, Raúl; Velosa, J. C.; Macieira, Mónica; Mendonça, Paulo
2011-01-01
The increased need to save material and energetic resources, allied with a growing concern on the environmental issues and incertitude on the evolution of the economy, has impelled minimalist-approaches to Architecture and Engineering, reducing to the minimum necessary expression the building elements. The development of new lightweight materials, most of them composites with fibrous reinforcement systems, has interest for building materials and textile industries. However, the...
Elastic constants of Transversely Isotropically Porous (TIP) materials
Energy Technology Data Exchange (ETDEWEB)
Tuchinskii, L.I.; Kalimova, N.L. [Institute of Problems of Materials Science, Kiev (Ukraine)
1994-11-01
The authors derive formulas describing the dependence of the elastic characteristics of multicapillary materials on the capillary porosity. The investigated materials are classified as transversely isotropic, and the anisotropy in their properties is the result of the directionality of the capillary pores. Analysis of the dependences obtained has shown that the elasticity moduli of these materials may be calculated using formulas suggested for reinforced materials, in which the elastic constants of the fibers are assumed to be equal to zero. The authors derive a relation between the Poisson`s ratios and the capillary porosity.
A Transverse Dynamic Deflection Model for Thin Plate Made of Saturated Porous Materials
Feng-xi, Zhou; Xiao-lin, Cao
2016-10-01
In this article, a transverse dynamic deflection model is established for thin plate made of saturated porous materials. Based on the Biot's model for fluid-saturated porous media, using the Love-Kirchhoff hypothesis, the governing equations of transverse vibrations of fluid-saturated poroelastic plates are derived in detail, which take the inertial, fluid viscous, mechanical couplings, compressibility of solid, and fluid into account. The free vibration and forced vibration response of a simply supported poroelastic rectangular plate is obtained by Fourier series expansion method. Through numerical examples, the effect of porosity and permeability on the dynamic response, including the natural frequency, amplitude response, and the resonance areas is assessed.
Hydrogen Storage in Porous Materials and Magnesium Hydrides
Grzech, A.
2013-01-01
In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen
Hydrogen Storage in Porous Materials and Magnesium Hydrides
Grzech, A.
2013-01-01
In this thesis representatives of two different types of materials for potential hydrogen storage application are presented. Usage of either nanoporous materials or metal hydrides has both operational advantages and disadvantages. A main objective of this thesis is to characterize the hydrogen stora
Effect of material heterogeneities on flow through porous media
Energy Technology Data Exchange (ETDEWEB)
Eaton, R.R.; Dykhuizen, R.C.
1991-01-01
Yucca Mountain, located in southwestern Nevada, is the site for a proposed high-level nuclear waste repository. The hydrologic units at Yucca Mountain appear to have quite different material characteristics. Additionally, measurements show that the material properties within each hydrologic unit vary significantly. Rock core samples taken from this site indicate that the volcanic tuff is highly fractured and nonhomogeneous. Modeling studies were conducted to determine the effects of material heterogeneities on the flow of water through rock. Multiple numerical calculations were made using random variations in spatial distributions of material properties. The results of these material variations on flow resistance, mechanical dispersion, and channeling were determined. Computed results were compared with a linear analytical model. Good agreement was obtained in the majority of the flow cases investigated.
Directory of Open Access Journals (Sweden)
N. I. Nagirna
2016-07-01
Full Text Available The paper studies the morphology, conductivity and electrochemical properties of carbon materials, obtained from raw plant materials at different condition of hydrothermal carbonization, using low-temperature porometry, impedance spectroscopy and galvanostatic charge/discharge. It is set, that in porous structure of carbon materials micropores are dominant; when carbonization temperature increased the specific surface and pore volume decrease more than 10 times. The temperature growth results in increasing the electrical conductivity of the carbon material more than 6 orders. It is found, that the maximal value of specific capacity (1138 mА·h/g has an electrochemical system based on porous carbon carbonized at 1023 K.
Two-phase viscoelastic jetting
Energy Technology Data Exchange (ETDEWEB)
Yu, J-D; Sakai, S.; Sethian, J.A.
2008-12-10
A coupled finite difference algorithm on rectangular grids is developed for viscoelastic ink ejection simulations. The ink is modeled by the Oldroyd-B viscoelastic fluid model. The coupled algorithm seamlessly incorporates several things: (1) a coupled level set-projection method for incompressible immiscible two-phase fluid flows; (2) a higher-order Godunov type algorithm for the convection terms in the momentum and level set equations; (3) a simple first-order upwind algorithm for the convection term in the viscoelastic stress equations; (4) central difference approximations for viscosity, surface tension, and upper-convected derivative terms; and (5) an equivalent circuit model to calculate the inflow pressure (or flow rate) from dynamic voltage.
Cnudde, Veerle; Dierick, Manuel; Vlassenbroeck, Jelle; Masschaele, Bert; Lehmann, Eberhard; Jacobs, Patric; Van Hoorebeke, Luc
2008-01-01
Fluid flow through porous natural building stones is of great importance when studying their weathering processes. Many traditional experiments based on mass changes are available for studying liquid transport in porous stones, such as the determination of the water absorption coefficient by capillarity. Because thermal neutrons experience a strong attenuation by hydrogen, neutron radiography is a suitable technique for the study of water absorption by capillarity in porous stones. However, image contrast can be impaired because hydrogen mainly scatters neutrons rather than absorbing them, resulting in a blurred image. Capillarity results obtained by neutron radiography and by the European Standard 1925 for the determination of the water absorption coefficient by capillarity for natural building stones with a variable porosity were compared. It is illustrated that high-speed neutron radiography can be a useful research tool for the visualization of internal fluid flow inside inorganic building materials such as limestones and sandstones.
Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites
Udeni Gunathilake T.M. Sampath; Yern Chee Ching; Cheng Hock Chuah; Johari J. Sabariah; Pai-Chen Lin
2016-01-01
Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen), synthetic biopolymers (poly(lactic acid), poly(lactic-co-glycolic acid)) and the...
The Aggregate Gradation for the Porous Concrete Pervious Road Base Material
Institute of Scientific and Technical Information of China (English)
YANG Zhifeng; MA Wei; SHEN Weiguo; ZHOU Mingkai
2008-01-01
The effects of the proportion of fine aggregate, the maximum size of the aggregate and the proportion of the 9.5mm to 4.75mm particle in the coarse aggregate on the properties of the porous concrete are investigated. Results indicate that the porous concrete with a cement dosage only 150kg/m3 has high strength and satisfying permeability when the aggregate has a passing percentage of 4.75mm around 10% to 5%, with the increase of the maximum size of the aggregate, the strength of the porous concrete decreases and the permeability increases. When the proportion of the 9.5mm to 4.75mm particle in the coarse aggregate is about 20%, there are no interference among the particles by Weymouth theory, the strength of the pervious porous concrete reaches the peak value. The optimum continues gradation limit of the aggregate for porous concrete pervious road base material is recommended according to the theoretical calculation and experimental results.
Porous materials: Lining up metal-organic frameworks
Champness, Neil R.
2017-03-01
A new report demonstrates an innovative approach to aligning crystallites of metal-organic frameworks such that thin films are created with oriented channels -- potentially overcoming one of the major barriers to application of these highly topical materials.
The Interaction of Sound and Shock Waves with Flexible Porous Materials
Abbott, James Fuller
Several topics are studied which illustrate the role of flexibility in determining the acoustical properties of flexible porous materials. A power balance relation is obtained for the flexible porous material which explicitly identifies two loss mechanisms for sound absorption: the losses due to the irreversible deformation of the structure, and those attributed to the viscous drag between the fluid and the structure. The finite flexible porous layer backed by a rigid wall is then considered. Irreversible deformation of the structure is shown to be the dominant loss mechanism for closed layers. Three departures from the basic model-- a porous layer with anisotropic flow resistance and structure factor, periodic structures consisting of porous layers separated by air gaps, and the porous medium in bulk with mean fluid flow--are considered. The reflection of shock waves is also studied, and a quasi-linear theory is developed which reproduces the principal features of experimental results obtained previously by Ingard. The theory assumes that the propagating pulses in the air and structure are linear and the gross, zeroth order motion of the porous layer is modeled by including its energy and momentum in the conservation equations; these equations compare the system just before and just after the reflection of the incident shock from the front surface of the layer. The substantial motion of the layer and its dragging against a constraining boundary (in this case the walls of the shock tube) are found to introduce a dependence of the front reflection coefficient and maximal layer deformation on the peak pressure of the incident shock. Lastly, we address the question of measurement of the complex compressibility K, a key parameter used to describe the dynamics of a given flexible porous material. The standard long-wavelength assumption used to determine K from experimental measurements of the frequency dependent velocity transfer function across a sample is shown to
Aduenko, Alexander A.; Murray, Andy; Mendoza-Cortes, Jose L.
2014-01-01
In this paper we present an approach for the generalization of adsorption of light gases in crystalline porous materials. Our approach allows the determination of gas uptake considering only geometrical constrains of the porous framework and interaction energy of the guest molecule with the framework. The derivation of this general equation for the uptake of any crystalline porous framework is presented. Based on this theory, we calculated optimal values for the adsorption enthalpy at differe...
Kutelia, E. R.; Gventsadze, D. I.; Eristavil, B. G.; Maisuradze, N. I.; Tsurtsumia, O. O.; Gventsadze, L. D.; Olofsson, U.; Wahlström, J.; Olander, L.
2011-12-01
Based on the comparative analysis of the experimental values determined for the tribological parameters for the three novel nano-porous composition base and two conventional brake lining materials while friction with the grey cast iron disc, it was shown the considerable high tribological efficiency of the novel nano-porous composition base lining materials in comparison with the conventional (from EU and USA market) brake lining materials. The explanation is given to the action mechanism of nano-porous composition base brake lining material and its tribological efficiency basing on the "triple phase" tribo-pair model.
Energy Technology Data Exchange (ETDEWEB)
Luca, V. [Programa Nacional de Gestion de Residuos Radiactivos, Comision Nacional de Energia Atomica, Centro Atomico Constituyentes, Av. General, Paz 1499, 1650 San Martin, Provincia de Buenos Aires (Argentina)
2013-07-01
Functionalized meso-porous materials are a class of hybrid organic-inorganic material in which a meso-porous metal oxide framework is functionalized with multifunctional organic molecules. These molecules may contain one or more anchor groups that form strong bonds to the pore surfaces of the metal oxide framework and free functional groups that can impart and or modify the functionality of the material such as for binding metal ions in solution. Such materials have been extensively studied over the past decade and are of particular interest in absorption applications because of the tremendous versatility in choosing the composition and architecture of the metal oxide framework and the nature of the functional organic molecule as well as the efficient mass transfer that can occur through a well-designed hierarchically porous network. A sorbent for nuclear applications would have to be highly selective for particular radio nuclides, it would need to be hydrolytically and radiolytically stable, and it would have to possess reasonable capacity and fast kinetics. The sorbent would also have to be available in a form suitable for use in a column. Finally, it would also be desirable if once saturated with radio nuclides, the sorbent could be recycled or converted directly into a ceramic or glass waste form suitable for direct repository disposal or even converted directly into a material that could be used as a transmutation target. Such a cradle-to- grave strategy could have many benefits in so far as process efficiency and the generation of secondary wastes are concerned.This paper will provide an overview of work done on all of the above mentioned aspects of the development of functionalized meso-porous adsorbent materials for the selective separation of lanthanides and actinides and discuss the prospects for future implementation of a cradle-to-grave strategy with such materials. (author)
Getting Out Of A Tight Spot: Physics Of Flow Through Porous Materials
Datta, Sujit Sankar
We study the physics of flow through porous materials in two different ways: by directly visualizing flow through a model three-dimensional (3D) porous medium, and by investigating the deformability of fluid-filled microcapsules having porous shells. In the first part of this thesis, we develop an experimental approach to directly visualize fluid flow through a 3D porous medium. We use this to investigate drainage, the displacement of a wetting fluid from a porous medium by a non-wetting fluid, as well as secondary imbibition, the subsequent displacement of the non-wetting fluid by the wetting fluid. We characterize the intricate morphologies of the non-wetting fluid ganglia left trapped within the pore space, and show how the ganglia configurations vary with the wetting fluid flow rate. We then visualize the spatial fluctuations in the fluid flow, both for single- and multi-phase flow. We use our measurements to quantify the strong variability in the flow velocities, as well as the pore-scale correlations in the flow. Finally, we use our experimental approach to study the simultaneous flow of both a wetting and a non-wetting fluid through a porous medium, and elucidate the flow instabilities that arise for sufficiently large flow rates. In the second part of this thesis, we study the mechanical properties of porous spherical microcapsules. We first introduce emulsions, and describe how their rheology depends on the microscopic interactions between the drops comprising them. We then study the formation and buckling of one class of microcapsule -- nanoparticle-coated emulsion drops. We also use double emulsions, drops within drops, as templates to form another class of microcapsule -- drops coated with thin, porous, polymer shells. We investigate how, under sufficient osmotic pressure, these microcapsules buckle, and show how the inhomogeneity in the shell structure can guide the folding pathway taken by a microcapsule as it buckles. Finally, we study the expansion
Institute of Scientific and Technical Information of China (English)
2008-01-01
Computational prediction of adsorption of small molecules in porous materials has great impact on the basic and applied research in chemical engineering and material sciences. In this work,we report an approach based on grand canonical ensemble Monte Carlo(GCMC) simulations and ab initio force fields. We calculated the adsorption curves of ammonia in ZSM-5 zeolite and hydrogen in MOF-5(a metal-organic-framework material). The predictions agree well with experimental data. Because the predictions are based on the first principle force fields,this approach can be used for the adsorption prediction of new molecules or materials without experimental data as guidance.
Ziminska, Monika; Dunne, Nicholas; Hamilton, Andrew R
2016-08-31
The deposition of stiff and strong coatings onto porous templates offers a novel strategy for fabricating macroscale materials with controlled architectures at the micro- and nanoscale. Here, layer-by-layer assembly is utilized to fabricate nanocomposite-coated foams with highly customizable properties by depositing polymer-nanoclay coatings onto open-cell foam templates. The compressive mechanical behavior of these materials evolves in a predictable manner that is qualitatively captured by scaling laws for the mechanical properties of cellular materials. The observed and predicted properties span a remarkable range of density-stiffness space, extending from regions of very soft elastomer foams to very stiff, lightweight honeycomb and lattice materials.
Recent advances in porous polyoxometalate-based metal-organic framework materials.
Du, Dong-Ying; Qin, Jun-Sheng; Li, Shun-Li; Su, Zhong-Min; Lan, Ya-Qian
2014-07-07
Polyoxometalate (POM)-based metal-organic framework (MOF) materials contain POM units and generally generate MOF materials with open networks. POM-based MOF materials, which utilize the advantages of both POMs and MOFs, have received increasing attention, and much effort has been devoted to their preparation and relevant applications over the past few decades. They have good prospects in catalysis owing to the electronic and physical properties of POMs that are tunable by varying constituent elements. In this review, we present recent developments in porous POM-based MOF materials, including their classification, synthesis strategies, and applications, especially in the field of catalysis.
Li, Jing; Liu, Wenlong; Xiao, Dan; Wang, Xinhui
2017-09-01
Oxygen-rich hierarchical porous carbon has been fabricated using pomelo peel fiber as a carbon source via an improved KOH activation method. The morphology and chemical composition of the obtained carbon materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), electron microscopy (EM), Raman spectra and elemental analysis. The unique porous structure with abundant oxygen functional groups is favorable to capacitive behavior, and the as-prepared carbon material exhibits high specific capacitance of 222.6 F g-1 at 0.5 A g-1 in 6 M KOH and superior stability over 5000 cycles. This work not only describes a simple way to prepare high-performance carbon material from the discarded pomelo peel, but also provides a strategy for its disposal issue and contributes to the environmental improvement.
Biomedical and Microbiological Applications of Bio-Based Porous Materials: A Review
Directory of Open Access Journals (Sweden)
T. M. S. Udenni Gunathilake
2017-04-01
Full Text Available Extensive employment of biomaterials in the areas of biomedical and microbiological applications is considered to be of prime importance. As expected, oil based polymer materials were gradually replaced by natural or synthetic biopolymers due to their well-known intrinsic characteristics such as biodegradability, non-toxicity and biocompatibility. Literature on this subject was found to be expanding, especially in the areas of biomedical and microbiological applications. Introduction of porosity into a biomaterial broadens the scope of applications. In addition, increased porosity can have a beneficial effect for the applications which exploit their exceptional ability of loading, retaining and releasing of fluids. Different applications require a unique set of pore characteristics in the biopolymer matrix. Various pore morphologies have different characteristics and contribute different performances to the biopolymer matrix. Fabrication methods for bio-based porous materials more related to the choice of material. By choosing the appropriate combination of fabrication technique and biomaterial employment, one can obtain tunable pore characteristic to fulfill the requirements of desired application. In our previous review, we described the literature related to biopolymers and fabrication techniques of porous materials. This paper we will focus on the biomedical and microbiological applications of bio-based porous materials.
From Block Copolymers to Nano-porous Materials
DEFF Research Database (Denmark)
Vigild, Martin Etchells; Ndoni, Sokol; Berg, Rolf Henrik
2003-01-01
Quantitative etching of the polydimethylsiloxane block in a series of polystyrene-polydimethylsiloxane (PS-PDMS) block copolymers is reported. Reacting the block copolymer with anhydrous hydrogen fluoride (HF) renders a nanoporous material with the remaining PS maintaining the original morphology...
Molecularly Imprinted Polymers and Highly Porous Materials in Sensing Applications
2007-04-01
microspheres from dilute dispersion polymerization systems (52). MIPs have also been prepared as imprinted membranes by precipitation of linear...and 1200m2/g. Supercritical drying of polysilsesquioxanes results in the formation of aerogels . These very low density materials have been
High-throughput screening: speeding up porous materials discovery.
Wollmann, Philipp; Leistner, Matthias; Stoeck, Ulrich; Grünker, Ronny; Gedrich, Kristina; Klein, Nicole; Throl, Oliver; Grählert, Wulf; Senkovska, Irena; Dreisbach, Frieder; Kaskel, Stefan
2011-05-14
A new tool (Infrasorb-12) for the screening of porosity is described, identifying high surface area materials in a very short time with high accuracy. Further, an example for the application of the tool in the discovery of new cobalt-based metal-organic frameworks is given. © The Royal Society of Chemistry 2011
Computational study of porous materials for gas separations
Lin, Li-Chiang
Nanoporous materials such as zeolites, zeolitic imidazolate frameworks (ZIFs), and metal-organic frameworks (MOFs) are used as sorbents or membranes for gas separations such as carbon dioxide capture, methane capture, paraffin/olefin separations, etc. The total number of nanoporous materials is large; by changing the chemical composition and/or the structural topologies we can envision an infinite number of possible materials. In practice one can synthesize and fully characterize only a small subset of these materials. Hence, computational study can play an important role by utilizing various techniques in molecular simulations as well as quantum chemical calculations to accelerate the search for optimal materials for various energy-related separations. Accordingly, several large-scale computational screenings of over one hundred thousand materials have been performed to find the best materials for carbon capture, methane capture, and ethane/ethene separation. These large-scale screenings identified a number of promising materials for different applications. Moreover, the analysis of these screening studies yielded insights into those molecular characteristics of a material that contribute to an optimal performance for a given application. These insights provided useful guidelines for future structural design and synthesis. For instance, one of the screening studies indicated that some zeolite structures can potentially reduce the energy penalty imposed on a coal-fired power plant by as much as 35% compared to the near-term MEA technology for carbon capture application. These optimal structures have topologies with a maximized density of pockets and they capture and release CO2 molecules with an optimal energy. These screening studies also pointed to some systems, for which conventional force fields were unable to make sufficiently reliable predictions of the adsorption isotherms of different gasses, e.g., CO2 in MOFs with open-metal sites. For these systems, we
Water adsorption in porous metal-organic frameworks and related materials.
Furukawa, Hiroyasu; Gándara, Felipe; Zhang, Yue-Biao; Jiang, Juncong; Queen, Wendy L; Hudson, Matthew R; Yaghi, Omar M
2014-03-19
Water adsorption in porous materials is important for many applications such as dehumidification, thermal batteries, and delivery of drinking water in remote areas. In this study, we have identified three criteria for achieving high performing porous materials for water adsorption. These criteria deal with condensation pressure of water in the pores, uptake capacity, and recyclability and water stability of the material. In search of an excellently performing porous material, we have studied and compared the water adsorption properties of 23 materials, 20 of which are metal-organic frameworks (MOFs). Among the MOFs are 10 zirconium(IV) MOFs with a subset of these, MOF-801-SC (single crystal form), -802, -805, -806, -808, -812, and -841 reported for the first time. MOF-801-P (microcrystalline powder form) was reported earlier and studied here for its water adsorption properties. MOF-812 was only made and structurally characterized but not examined for water adsorption because it is a byproduct of MOF-841 synthesis. All the new zirconium MOFs are made from the Zr6O4(OH)4(-CO2)n secondary building units (n = 6, 8, 10, or 12) and variously shaped carboxyl organic linkers to make extended porous frameworks. The permanent porosity of all 23 materials was confirmed and their water adsorption measured to reveal that MOF-801-P and MOF-841 are the highest performers based on the three criteria stated above; they are water stable, do not lose capacity after five adsorption/desorption cycles, and are easily regenerated at room temperature. An X-ray single-crystal study and a powder neutron diffraction study reveal the position of the water adsorption sites in MOF-801 and highlight the importance of the intermolecular interaction between adsorbed water molecules within the pores.
Ductile damage of porous materials with two populations of voids
Vincent, Pierre-Guy; Monerie, Yann; Suquet, Pierre
2008-01-01
This study is devoted to the modelling of ductile damage in uranium dioxide. This polycrystalline material contains two populations of voids of well separated size. The problem addressed here is the prediction of the effective flow surface of a Gurson material containing randomly oriented oblate voids. The case of spherical voids is considered first and the variational approach of Gurson is generalized by adding a compressible component to his original velocity field. The case of aligned oblate voids is then considered and a suitable generalization of a velocity field due to Gologanu et al. (ASME J. Engrg. Mater. Technol. 116 (1994) 290-297) is proposed. The extension to randomly oriented voids is achieved by averaging over all orientations. In each case, rigorous upper bounds and approximate estimates are derived and compared (in the case of spherical voids) with Finite Element simulations. To cite this article: P.-G. Vincent et al., C. R. Mecanique 336 (2008).
DEFF Research Database (Denmark)
2015-01-01
The present invention relates to a method of manufacturing a porous polymer component 1 with structured and/or random pores 4 and/or channels 5. The method comprises arranging a dissolvable, sacrificial material 2 in a geometrical arrangement corresponding to an inner structure to be obtained...... in the polymer component 1. A component material 3, which is to form the final component 1, is arranged so that it surrounds at least a majority of the sacrificial material 2, and subsequently the sacrificial material 2 is dissolved and removed from the component material 3. The sacrificial material 2...... and thereby the resulting inner structure of the component 1 is arranged in a controlled and reproducible manner. The sacrificial material 2 and possibly also the component material 3 may e.g. be arranged by use of a 3D-printer or manually. The method may e.g. be used to manufacture a three...
Thermoelectric properties of porous (Bi0.15Sb0.85)2Te3 thermoelectric materials
Institute of Scientific and Technical Information of China (English)
Guiying Xu; Tingjie Chen; Jianqiang Liu; Zhangjian Zhou
2003-01-01
In order to obtain thermoelectric materials with high figure of merit, the concept of Hollow (Vacuum) Quantum Structure or Effect and related thermoelectric materials design were proposed. To demonstrate the theory, the materials of (Bio.15Sb0.85)2Te3 with porous structure have been fabricated. Their thermoelectric properties and the microstructure were investigated and compared with their density structure. It was found that the porous structure could improve their properties greatly.
Porous carbon material containing CaO for acidic gas capture: preparation and properties.
Przepiórski, Jacek; Czyżewski, Adam; Pietrzak, Robert; Toyoda, Masahiro; Morawski, Antoni W
2013-12-15
A one-step process for the preparation of CaO-containing porous carbons is described. Mixtures of poly(ethylene terephthalate) with natural limestone were pyrolyzed and thus hybrid sorbents could be easily obtained. The polymeric material and the mineral served as a carbon precursor and CaO delivering agent, respectively. We discuss effects of the preparation conditions and the relative amounts of the raw materials used for the preparations on the porosity of the hybrid products. The micropore areas and volumes of the obtained products tended to decrease with increasing CaO contents. Increase in the preparation temperature entailed a decrease in the micropore volume, whereas the mesopore volume increased. The pore creation mechanism is proposed on the basis of thermogravimetric and temperature-programmed desorption measurements. The prepared CaO-containing porous carbons efficiently captured SO2 and CO2 from air. Washing out of CaO from the hybrid materials was confirmed as a suitable method to obtain highly porous carbon materials.
Osteogenesis and Degradation Behavior of rhBMP-2/β-Tricalcium Phosphate Porous Composite Materials
Institute of Scientific and Technical Information of China (English)
Weizhong YANG; Dali ZHOU; Ge LIANG; Guangfu YIN; Yun ZHANG
2004-01-01
Ultrafine -tricalcium phosphate (β-TCP) powders with good crystalline structure were produced by a new wet process. Throughbone tissue engineering approach, porous β-TCP ceramic was combined with recombined human bone morphogenetic proteins- 2 (rhBMP-2) to develop a novel composite material. Osteogenesis capacity of the composite was investigated intramuscularlyin rat with histological analyses and SEM examination. Pure β-TCP porous ceramic was investigated as the control. Resultsshow that the composite materials possess good biocompatibility, biodegradation and strong osteogenesis capacity throughinductive process after implantation. Material degradation began from 2 weeks post-implantation accompanying with thechanging of pore structure, with the enwrapping and separation of materials by hyperplatic mesenchymal cells and fibroblast,and with the phagocytose reaction of multinucleated giant cells. Early in 72 h, immature cartilage could be found within novelcomposite; mature lamellar bone was induced to generate after 3 weeks. With strong osteoinduction capacity and controllablebiodegradation, the novel rhBMP-2/β-TCP porous ceramic is expected to be a promising bone grafting substitute for bonetissue engineering.
Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites
Directory of Open Access Journals (Sweden)
Udeni Gunathilake T.M. Sampath
2016-12-01
Full Text Available Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen, synthetic biopolymers (poly(lactic acid, poly(lactic-co-glycolic acid and their composite materials. Properties of biopolymers strongly depend on the polymer structure and are of great importance when fabricating the polymer into intended applications. Biopolymers find a large spectrum of application in the medical field. Other fields such as packaging, technical, environmental, agricultural and food are also gaining importance. The introduction of porosity into a biomaterial broadens the scope of applications. There are many techniques used to fabricate porous polymers. Fabrication methods, including the basic and conventional techniques to the more recent ones, are reviewed. Advantages and limitations of each method are discussed in detail. Special emphasis is placed on the pore characteristics of biomaterials used for various applications. This review can aid in furthering our understanding of the fabrication methods and about controlling the porosity and microarchitecture of porous biopolymer materials.
Porous MgO material with ultrahigh surface area as the matrix for phase change composite
Energy Technology Data Exchange (ETDEWEB)
Hao, Yonggan; Shao, Xiankun; Liu, Tongxuan [School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001 (China); Li, Benxia, E-mail: libx@mail.ustc.edu.cn [School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001 (China); Nie, Shibin, E-mail: nsb@mail.ustc.edu.cn [School of Energy Resources and Safety, Anhui University of Science and Technology, Huainan, Anhui 232001 (China)
2015-03-20
Highlights: • Porous MgO material with ultrahigh surface area was synthesized. • A composite PCM was prepared from PEG-1000 and the porous MgO. • The phase change temperatures and enthalpy of the composite were measured. • The composite PCM performed good shape-stabilized property. - Abstract: Mesoporous magnesium oxide (MgO) material was synthesized using an integration of the evaporation-induced surfactant assembly and magnesium nitrate pyrolysis. The as-prepared MgO material is well crystalline, and possesses three-dimensional interconnected mesopores and a surface area as high as 596 m{sup 2}/g. Using the porous MgO as a matrix and polyethylene glycol (PEG-1000) as the functional phase for heat energy storage, a shape-stabilized phase change composite of PEG/MgO was fabricated by an easy impregnation method. In the composite, mesoporous MgO material provides structural strength and prevents the leakage of the molten PEG during the phase change process. The compositions and microstructures of the PEG/MgO composite were determined by Fourier transformation infrared spectroscope (FT-IR), X-ray diffractometer (XRD), scanning electronic microscope (SEM) and thermogravimetric analyzer (TGA), respectively. The phase change properties of the PEG/MgO composite were determined by differential scanning calorimeter (DSC). The high heat-energy storage capability and good thermal stability of the composite enable it extensive applications in the future.
Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites.
Sampath, Udeni Gunathilake T M; Ching, Yern Chee; Chuah, Cheng Hock; Sabariah, Johari J; Lin, Pai-Chen
2016-12-07
Biopolymers and their applications have been widely studied in recent years. Replacing the oil based polymer materials with biopolymers in a sustainable manner might give not only a competitive advantage but, in addition, they possess unique properties which cannot be emulated by conventional polymers. This review covers the fabrication of porous materials from natural biopolymers (cellulose, chitosan, collagen), synthetic biopolymers (poly(lactic acid), poly(lactic-co-glycolic acid)) and their composite materials. Properties of biopolymers strongly depend on the polymer structure and are of great importance when fabricating the polymer into intended applications. Biopolymers find a large spectrum of application in the medical field. Other fields such as packaging, technical, environmental, agricultural and food are also gaining importance. The introduction of porosity into a biomaterial broadens the scope of applications. There are many techniques used to fabricate porous polymers. Fabrication methods, including the basic and conventional techniques to the more recent ones, are reviewed. Advantages and limitations of each method are discussed in detail. Special emphasis is placed on the pore characteristics of biomaterials used for various applications. This review can aid in furthering our understanding of the fabrication methods and about controlling the porosity and microarchitecture of porous biopolymer materials.
Enhancing activated-peroxide formulations for porous materials :
Energy Technology Data Exchange (ETDEWEB)
Krauter, Paula; Tucker, Mark D.; Tezak, Matthew S.; Boucher, Raymond
2012-12-01
During an urban wide-area incident involving the release of a biological warfare agent, the recovery/restoration effort will require extensive resources and will tax the current capabilities of the government and private contractors. In fact, resources may be so limited that decontamination by facility owners/occupants may become necessary and a simple decontamination process and material should be available for this use. One potential process for use by facility owners/occupants would be a liquid sporicidal decontaminant, such as pHamended bleach or activated-peroxide, and simple application devices. While pH-amended bleach is currently the recommended low-tech decontamination solution, a less corrosive and toxic decontaminant is desirable. The objective of this project is to provide an operational assessment of an alternative to chlorine bleach for low-tech decontamination applications activated hydrogen peroxide. This report provides the methods and results for activatedperoxide evaluation experiments. The results suggest that the efficacy of an activated-peroxide decontaminant is similar to pH-amended bleach on many common materials.
Mirabolghasemi, M.; Prodanovic, M.
2012-12-01
destruction of particle bridges. Finally, depending on the material and fluids that penetrate into the porous medium, the ionic forces might play a significant role in the filtration process. We thus also report on influence of particle attachment (and detachment) on the type of clogging mechanisms. Pore scale simulations allow for visualization and understanding of fundamental processes, and, further, the velocity fields are integrated into a distinctly non-monotonic permeability-porosity/(depth of penetration) relationship.
Moisture storage parameters of porous building materials as time-dependent properties
Záleská, Martina; Pavlíková, Milena; Pavlík, Zbyšek
2016-06-01
Three different types of bricks and two different types of sandstones are studied in terms of measurement moisture storage parameters for over-hygroscopic moisture area using pressure plate device. For researched materials, basic physical properties as bulk density, matrix density and total open porosity are determined. From the obtained data of moisture storage measurement, the water retention curves and curves of degree of saturation in dependence on suction pressure are constructed. Water retention curve (also called suction curve, capillary potential curve, capillary-pressure function and capillary-moisture relationship) is the basic material property used in models for simulation of moisture storage in porous building materials.
Mohanty, Soumyaranjan; Emnéus, Jenny; Wolff, Anders; Dufva, Martin; Larsen, Layla Bashir; Skolimowski, Maciej; Amato, Letizia
2015-01-01
The present invention relates to a method of manufacturing a porous polymer component 1 with structured and/or random pores 4 and/or channels 5. The method comprises arranging a dissolvable, sacrificial material 2 in a geometrical arrangement corresponding to an inner structure to be obtained in the polymer component 1. A component material 3, which is to form the final component 1, is arranged so that it surrounds at least a majority of the sacrificial material 2, and subsequently the sacrif...
DIFFERENTIAL ANALYSIS OF VOLUMETRIC STRAINS IN POROUS MATERIALS IN TERMS OF WATER FREEZING
Directory of Open Access Journals (Sweden)
Rusin Z.
2013-06-01
Full Text Available The paper presents the differential analysis of volumetric strain (DAVS. The method allows measurements of volumetric deformations of capillary-porous materials caused by water-ice phase change. The VSE indicator (volumetric strain effect, which under certain conditions can be interpreted as the minimum degree of phase change of water contained in the material pores, is proposed. The test results (DAVS for three materials with diversified microstructure: clinker brick, calcium-silicate brick and Portland cement mortar were compared with the test results for pore characteristics obtained with the mercury intrusion porosimetry.
Broadband quasi perfect absorption using chirped multi-layer porous materials
Directory of Open Access Journals (Sweden)
N. Jiménez
2016-12-01
Full Text Available This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and quasi perfect absorption. The transfer and scattering matrix formalism, together with numerical simulations based on the finite element method are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less amount of material than the complete bulk porous layer.
Measurement and inverse estimation of 3D anisotropic flow resistivity for porous materials
Göransson, Peter; Guastavino, Rémi; Hörlin, Nils-Erik
2009-11-01
This paper presents a new methodology for estimating the anisotropic flow resistivity for porous materials. From pressure measurements on a cubic or parallelepiped sample of a porous material, the flow resistivities are determined using inverse estimation. The core of the estimation is a series of 3D solutions to Darcy's law, where the flow resistivity tensor is varied until the sum of the quadratic errors between measured and computed pressures is minimised. The overall approach and experimental set-up used, enabling efficient measurements of high quality, are described in some detail together with the main steps of the measurement and estimation procedures. Results from a fibrous glass wool and a polyurethane foam are discussed and compared to standard measurement data.
Broadband quasi perfect absorption using chirped multi-layer porous materials
Jiménez, Noé; Cebrecos, Alejandro; Picó, Rubén; Sánchez-Morcillo, Víctor J; García-Raffi, Lluis M
2016-01-01
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses as well as the critical coupling condition, the system is designed to have broadband unidirectional and nearly perfect absorption. The transfer and scattering matrix formalism, together with full wave numerical simulations are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less than 15 \\% of the complete porous material.
Glazunov, A. A.; Ishchenko, A. N.; Afanasyeva, S. A.; Belov, N. N.; Burkin, V. V.; Rogaev, K. S.; Tabachenko, A. N.; Khabibulin, M. V.; Yugov, N. T.
2016-03-01
A computational-experimental investigation of stress-strain state and fracture of a porous heterogeneous material with an inorganic matrix, used as a thermal barrier coating of flying vehicles, under conditions of a high-velocity impact by a spherical steel projectile imitating a meteorite particle is discussed. Ballistic tests are performed at the velocities about 2.5 km/s. Numerical modeling of the high-velocity impact is described within the framework of a porous elastoplastic model including fracture and different phase states of the materials. The calculations are performed using the Euler and Lagrange numerical techniques for the velocities up to 10 km/s in a complete-space problem statement.
Fly ash porous material using geopolymerization process for high temperature exposure.
Abdullah, Mohd Mustafa Al Bakri; Jamaludin, Liyana; Hussin, Kamarudin; Bnhussain, Mohamed; Ghazali, Che Mohd Ruzaidi; Ahmad, Mohd Izzat
2012-01-01
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers made with fly ash after exposure to temperatures from 600 °C up to 1000 °C. The research methodology consisted of pozzolanic materials (fly ash) synthesized with a mixture of sodium hydroxide and sodium silicate solution as an alkaline activator. Foaming agent solution was added to geopolymer paste. The geopolymer paste samples were cured at 60 °C for one day and the geopolymers samples were sintered from 600 °C to 1000 °C to evaluate strength loss due to thermal damage. We also studied their phase formation and microstructure. The heated geopolymers samples were tested by compressive strength after three days. The results showed that the porous geopolymers exhibited strength increases after temperature exposure.
Ordered porous mesostructured materials from nanoparticle-block copolymer self-assembly
Warren, Scott; Wiesner, Ulrich; DiSalvo, Jr., Francis J
2013-10-29
The invention provides mesostructured materials and methods of preparing mesostructured materials including metal-rich mesostructured nanoparticle-block copolymer hybrids, porous metal-nonmetal nanocomposite mesostructures, and ordered metal mesostructures with uniform pores. The nanoparticles can be metal, metal alloy, metal mixture, intermetallic, metal-carbon, metal-ceramic, semiconductor-carbon, semiconductor-ceramic, insulator-carbon or insulator-ceramic nanoparticles, or combinations thereof. A block copolymer/ligand-stabilized nanoparticle solution is cast, resulting in the formation of a metal-rich (or semiconductor-rich or insulator-rich) mesostructured nanoparticle-block copolymer hybrid. The hybrid is heated to an elevated temperature, resulting in the formation of an ordered porous nanocomposite mesostructure. A nonmetal component (e.g., carbon or ceramic) is then removed to produce an ordered mesostructure with ordered and large uniform pores.
Broadband quasi perfect absorption using chirped multi-layer porous materials
Jiménez, N.; Romero-García, V.; Cebrecos, A.; Picó, R.; Sánchez-Morcillo, V. J.; Garcia-Raffi, L. M.
2016-12-01
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and quasi perfect absorption. The transfer and scattering matrix formalism, together with numerical simulations based on the finite element method are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less amount of material than the complete bulk porous layer.
Direct Synthesis of Porous Multilayer Graphene Materials Using Thermal Plasma at Low Pressure
Directory of Open Access Journals (Sweden)
Ravil Amirov
2015-01-01
Full Text Available Porous multilayer graphenes have been synthesized by decomposition of hydrocarbons in a thermal plasma jet. Products of synthesis were characterized by electron microscopy, thermogravimetry, Raman spectroscopy, and X-ray diffraction. Possibility of producing a wide range of graphene materials with different morphology and structure has been shown. Influence of the experimental conditions on mesopores structure of the synthesis products has been investigated using the method of “limited evaporation.”
Directory of Open Access Journals (Sweden)
Adrián Angulo-Ibáñez
2016-01-01
Full Text Available The processing of an originally non-porous 1D coordination polymer as monolithic gel, xerogel and aerogel is reported as an alternative method to obtain novel metal-organic porous materials, conceptually different to conventional crystalline porous coordination polymer (PCPs or metal-organic frameworks (MOFs. Although the work herein reported is focused upon a particular kind of coordination polymer ([M(μ-ox(4-apy2]n, M: Co(II, Ni(II, the results are of interest in the field of porous materials and of MOFs, as the employed synthetic approach implies that any coordination polymer could be processable as a mesoporous material. The polymerization conditions were fixed to obtain stiff gels at the synthesis stage. Gels were dried at ambient pressure and at supercritical conditions to render well shaped monolithic xerogels and aerogels, respectively. The monolithic shape of the synthesis product is another remarkable result, as it does not require a post-processing or the use of additives or binders. The aerogels of the 1D coordination polymers are featured by exhibiting high pore volumes and diameters ranging in the mesoporous/macroporous regions which endow to these materials the ability to deal with large-sized molecules. The aerogel monoliths present markedly low densities (0.082–0.311 g·cm−3, an aspect of interest for applications that persecute light materials.
High density porous polyethylene material (Medpor) as an unwrapped orbital implant
Institute of Scientific and Technical Information of China (English)
CHEN Yan-hong; CUI Hong-guang
2006-01-01
Objective: To introduce the clinical effect among patients who received an unwrapped orbital implant with high density porous polyethylene material (Medpor) after enucleation or evisceration. Methods: Retrospective analysis of a series of 302 patients with anophthalmia who underwent placement of an unwrapped high density porous polyethylene orbital implant. We compared the patients (n=180) who accepted primary implant placement with those (n=122) who accepted secondary implant placement. Parameters evaluated included: age at time of surgery, date of surgery, sex, implant type and size, surgery type, the surgical procedure and technique performed, and complications. Results: The time of follow-up ranged from 2.0 to 58.0 months (mean 32.5 months). A total of 5 of 302 (1.66%) cases had documented postoperative complications. The following problems were noted after surgery: implant exposure, 3 patients (0.99%); implant removed due to orbital infection, 1 patient (0.34%); ptosis, 1 patient (0.34%). There were no significant complications observed in other 297 cases and all implants showed good orbital motility. The clinical effect of primary implant placement is better than that of secondary placement. Conclusion: High density porous polyethylene material can be used successfully as an unwrapped orbital implant in anopthalmic socket surgery with minimal complications. The material is well tolerated, nonantigenic and has low rate of infection and migration.
Damage and failure modeling of lotus-type porous material subjected to low-cycle fatigue
Directory of Open Access Journals (Sweden)
J. Kramberger
2016-01-01
Full Text Available The investigation of low-cycle fatigue behaviour of lotus-type porous material is presented in this paper. Porous materials exhibit some unique features which are useful for a number of various applications. This paper evaluates a numerical approach for determining of damage initiation and evolution of lotus-type porous material with computational simulations, where the considered computational models have different pore topology patterns. The low-cycle fatigue analysis was performed by using a damage evolution law. The damage state was calculated and updated based on the inelastic hysteresis energy for stabilized cycle. Degradation of the elastic stifness was modeled using scalar damage variable. In order to examine crack propagation path finite elements with severe damage were deleted and removed from the mesh during simulation. The direct cyclic analysis capability in Abaqus/Standard was used for low-cycle fatigue analysis to obtain the stabilized response of a model subjected to the periodic loading. The computational results show a qualitative understanding of pores topology influence on low-cycle fatigue under transversal loading conditions in relation to pore orientation.
Anoukou, K.; Pastor, F.; Dufrenoy, P.; Kondo, D.
2016-06-01
The present two-part study aims at investigating the specific effects of Mohr-Coulomb matrix on the strength of ductile porous materials by using a kinematic limit analysis approach. While in the Part II, static and kinematic bounds are numerically derived and used for validation purpose, the present Part I focuses on the theoretical formulation of a macroscopic strength criterion for porous Mohr-Coulomb materials. To this end, we consider a hollow sphere model with a rigid perfectly plastic Mohr-Coulomb matrix, subjected to axisymmetric uniform strain rate boundary conditions. Taking advantage of an appropriate family of three-parameter trial velocity fields accounting for the specific plastic deformation mechanisms of the Mohr-Coulomb matrix, we then provide a solution of the constrained minimization problem required for the determination of the macroscopic dissipation function. The macroscopic strength criterion is then obtained by means of the Lagrangian method combined with Karush-Kuhn-Tucker conditions. After a careful analysis and discussion of the plastic admissibility condition associated to the Mohr-Coulomb criterion, the above procedure leads to a parametric closed-form expression of the macroscopic strength criterion. The latter explicitly shows a dependence on the three stress invariants. In the special case of a friction angle equal to zero, the established criterion reduced to recently available results for porous Tresca materials. Finally, both effects of matrix friction angle and porosity are briefly illustrated and, for completeness, the macroscopic plastic flow rule and the voids evolution law are fully furnished.
Theoretical and experimental investigation of acoustic streaming in a porous material.
Poesio, Pietro; Ooms, Gijs; Schraven, Arthur; van der Bas, Fred
2002-07-01
An experimental and theoretical investigation of the influence of high-frequency acoustic waves on the flow of a liquid through a porous material has been made. Particular attention was paid to the phenomenon of acoustic streaming of the liquid in the porous material due to the damping of the acoustic waves. The experiments were performed on Berea sandstone cores. Two acoustic horns were used with frequencies of 20 and 40 kHz, and with maximum power output of 2 and 0.7 kW, respectively. A high external pressure was applied in order to avoid cavitation. A microphone was used to measure the damping of the waves in the porous material and also temperature and pressure measurements in the flowing liquid inside the cores were carried out. To model the acoustic streaming effect Darcy's law was extended with a source term representing the momentum transfer from the acoustic waves to the liquid. The model predictions for the pressure distribution inside the core under acoustic streaming conditions are in reasonable agreement with the experimental data.
Institute of Scientific and Technical Information of China (English)
HU Ying; CHEN Ke＇an; M. A. Galland; C. Batifol
2012-01-01
A method based on the combination of the （u,p） formulation and finite element method was applied to calcu~ati~g the acoust~cM performance of a double-wall active acoustic structure with porous materials. The （u, p） formulation based on the displacement in solid phase and the pressure in fluid phase was developed to investigate the sound propagation in porous materials. The acoustic performance of the double-wM1 active acoustic structure having porous materials was calculated and the measurement was taken. The numerical results matched well with the measured data. More than 10 dB transmission loss of the double-wall active acoustic structure can be improved in the resonance frequency with active control, and its absorption coefficient is up to 0.6 over 500 Hz. The relative error between the prediction and measurement is less than 5% at the resonance frequency of the porous materials.
Critical transport velocity in two-phase, horizontal pipe flow
Energy Technology Data Exchange (ETDEWEB)
Sommerville, D. (U.S. Army Chemical Research, Development and Engineering Center, Aberdeen Proving Grounds, MD (US))
1991-02-01
This paper reports on the suspension of solid particles or entrainment of liquid droplets in two- phase flow. Theoretical and empirical relationships have been derived for both instances without any consideration to the similarities between the two. However, a general relation for two-phase flow is desirable since there are systems that cannot be readily defined due to the dual (solid/liquid) nature of the transported material, such as colloids, pulp, slurries, and sludge. Using turbulence theory, one general equation can be derived to predict critical transport velocities for two-phase horizontal flow.
THE COMPLEX USE OF LOCAL TYPES OF FUEL IN THE POROUS CONSTRUCTION MATERIALS PRODUCTION
Directory of Open Access Journals (Sweden)
N. P. Voronova
2014-01-01
Full Text Available The article presents a comprehensive low-waste technology is the use of local fuels, which can be used in the technology of some porous building materials. Also provides new methods of preparation of porous building materials based on aggloporite using local fuels and waste energy on the basis of milled peat, fuel briquettes and wood chips allow to replace expensive imported components that comprise the raw mixtures (coal, anthracite.On the basis of mathematical modeling of cooling in reheat furnaces pusher drive developed a method of engineering calculation mode batch hardening in agglomeration. Submitted constructive solution for the development of the cooling charge with thermophysical rational justification cooling modes. A study of the temperature distribution within the charge depending on the different speeds of the belt sintering machine, and hence on the cooling time.The characteristics of the raw material deposits "Fanipol" and the optimal composition of the charge which includes loam, coal, milled peat. In industrial research obtained aggloporite this formulation has shown positive results in strength and density. Established that by decreasing the particle size of the fuel increases the redox potential of the combustion products, which reduces the height of the oxidizing zone and the speed of the sintering raw mix. These processes increase the productivity of sinter machine.Technology is implemented on the "Minsk factory of building materials". The tests analyzed production technology porous construction materials using milled peat with the addition of sawdust. The study results recommend further use of sapropel, which cost significantly lower raw material mixture of submissions and in their physical and mechanical properties much closer to the properties of milled peat.
Adsorption of phenol from aqueous solution by a hierarchical micro-nano porous carbon material
Institute of Scientific and Technical Information of China (English)
无
2012-01-01
A hierarchical micro-nano porous carbon material (MNC) was prepared using expanded graphite (EG), sucrose, and phosphoric acid as raw materials, followed by sucrose-phosphoric acid solution impregnation, solidification, carbonization and activation. Nitrogen adsorption and mercury porosimetry show that mixed nanopores and micropores coexist in MNC with a high specific surface area of 1978 m2·g-1 and a total pore volume of 0.99 cm3·g-1. In addition, the MNC is found to consist of EG and activated carbon with...
Lin, Jing; Feng, Congcong; He, Xin; Wang, Weijia; Fang, Yi; Liu, Zhenya; Li, Jie; Tang, Chengchun; Huang, Yang
2016-09-01
We report the design and synthesis of a novel kind of organic-inorganic hybrid material via the incorporation of europium (III) β-diketonate complexes (Eu(TTA)3, TTA = 2-thenoyltrifluoroacetone) into one-dimensional (1D) porous boron nitride (BN) microfibers. The developed Eu(TTA)3@BN hybrid composites with typical 1D fibrous morphology exhibit bright visible red-light emission on UV illumination. The confinement of Eu(TTA)3 within pores of BN microfibers not only decreases the aggregation-caused quenching in solid Eu(TTA)3, but also improves their thermal stabilities. Moreover, The strong interactions between Eu(TTA)3 and porous BN matrix result in an interesting energy transfer process from BN host to TTA ligand and TTA ligand to Eu3+ ions, leading to the remarkable increase of red emission. The synthetic approach should be a very promising strategy which can be easily expanded to other hybrid luminescent materials based on porous BN.
Lin, Jing; Feng, Congcong; He, Xin; Wang, Weijia; Fang, Yi; Liu, Zhenya; Li, Jie; Tang, Chengchun; Huang, Yang
2016-01-01
We report the design and synthesis of a novel kind of organic-inorganic hybrid material via the incorporation of europium (III) β-diketonate complexes (Eu(TTA)3, TTA = 2-thenoyltrifluoroacetone) into one-dimensional (1D) porous boron nitride (BN) microfibers. The developed Eu(TTA)3@BN hybrid composites with typical 1D fibrous morphology exhibit bright visible red-light emission on UV illumination. The confinement of Eu(TTA)3 within pores of BN microfibers not only decreases the aggregation-caused quenching in solid Eu(TTA)3, but also improves their thermal stabilities. Moreover, The strong interactions between Eu(TTA)3 and porous BN matrix result in an interesting energy transfer process from BN host to TTA ligand and TTA ligand to Eu3+ ions, leading to the remarkable increase of red emission. The synthetic approach should be a very promising strategy which can be easily expanded to other hybrid luminescent materials based on porous BN. PMID:27687246
Jeanloz, R.
2016-12-01
A thermodynamic model based on the Mie-Grüneisen equation of state does a good job of describing the response of porous materials to impact, so can provide insights into the accretion and cohesion of planetesimals too small to be significantly held together by gravity (e.g., tens of km or less in average diameter). The model identifies an offset in Hugoniot pressure (∆PH) due to porosity that is found to be in agreement with experimental shock-compression measurements for samples having a wide range of initial porosities. Assuming the Grüneisen parameter (γ) is proportional to volume (γ/V = constant), the relative offset in Hugoniot pressure as a function of initial porosity (φ = 1 - V0/V0por) and compression (η = 1 - V/V0) is ∆PH/PH = γ0 φ/[2(1 - φ) - γ0 (φ + η(1 - φ))] where subscripts 0 and por represent zero-pressure (non-porous) conditions and a porous sample, respectively. This additional thermal pressure at a given volume is due to the extra internal energy and corresponding temperature increase associated with collapsing pores (Fig. 1: near-identical curves for φ = 0.001 and 0.01). This result can be interpreted as indicating that upon collapse individual pores create hot spots with temperatures of order 103-104K above the background, suggesting that impact into an initially porous target can result in cohesion due to partial melting and vaporization. Moreover, the waste heat associated with pore closure far exceeds the dissipation in shock loading of non-porous material, reflecting the ability of a porous target to absorb and dissipate impact energy. The Mie-Grüneisen model along with analysis of waste heat thus provides a scaling for planetesimal impact that might explain how rock and regolith accrete into a gravitationally bound planet. Fig. 1. Porosity-induced anomaly in Hugoniot temperature per unit of porosity, shown as a function of compression for samples with initial porosity φ = 0.001 (green), 0.01 (blue) and 0.1 (gold
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal-Organic Frameworks.
Kaneti, Yusuf Valentino; Tang, Jing; Salunkhe, Rahul R; Jiang, Xuchuan; Yu, Aibing; Wu, Kevin C-W; Yamauchi, Yusuke
2017-03-01
The emergence of metal-organic frameworks (MOFs) as a new class of crystalline porous materials is attracting considerable attention in many fields such as catalysis, energy storage and conversion, sensors, and environmental remediation due to their controllable composition, structure and pore size. MOFs are versatile precursors for the preparation of various forms of nanomaterials as well as new multifunctional nanocomposites/hybrids, which exhibit superior functional properties compared to the individual components assembling the composites. This review provides an overview of recent developments achieved in the fabrication of porous MOF-derived nanostructures including carbons, metal oxides, metal chalcogenides (metal sulfides and selenides), metal carbides, metal phosphides and their composites. Finally, the challenges and future trends and prospects associated with the development of MOF-derived nanomaterials are also examined. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Li, Ying; Lu, Chunxiang; Wang, Junzhong; Yan, Hua; Zhang, Shouchun
2016-03-01
A hierarchical porous carbon fiber with high nitrogen doping was fabricated for high-performance supercapacitor. For the purpose of high nitrogen retention, the porous polyacrylonitrile fiber was treated by hydrazine hydrate, and then underwent pre-oxidation, carbonization, and activation in sequence. The resulted material exhibited high nitrogen content of 7.82 at.%, large specific surface area of 1963.3m2 g-1, total pore volume of 1.523cm3 g-1, and the pores with size range of 1-4nm were account for 49.1%. Due to these features, the high reversible capacitance of 415F g-1 and the good performance in heavy load discharge were obtained. In addition, the amazing cyclability was observed after 10,000 circles without capacitance fading.
Analysis for Fracture Characteristics of Porous Materials by using Cohesive Zone Models
Energy Technology Data Exchange (ETDEWEB)
Choi, Seung Hyun; Ha, Sang Yul; Kim, Ki Tae [Pohang University of Science and Technology, Pohang (Korea, Republic of)
2009-06-15
The effect of porosity on the crack propagation is studied by using the cohesive zone model. Standard mode I fracture test were done by using compact tension specimens with various porosities. Load-load line displacement curves and {delta}5-crack resistance curves for various porosities were obtained from experiments. The cohesive zone model proposed by Xu and Needleman was employed to describe the crack propagation in porous media, and the Gurson model is used for constitutive relation of porous materials. These models were implemented into user subroutines of a finite element program ABAQUS. The fracture mode changes from ductile fracture to brittle fracture as the porosity increases. Numerical calculations agree well with experimental results.
Fabrication of Porous Scaffolds Using NaHCO3 Particulates as the Porogen Material
Institute of Scientific and Technical Information of China (English)
SHEN Xiongjun; RUAN Jianming; ZHOU Zhongcheng; ZHANG Haipo; ZHOU Zhihua
2007-01-01
A new method of fabricating porous polymer scaffolds was developed, using sodium hydrogen carbonate particulates as the porogen to foam. The pore structure of polymer scaffolds can easily be manipulated by controlling the size and weight fraction of sodium hydrogen carbonate particulates. The scaffolds are highly porous with a porosity greater than 90% and with a larger pore size ranging from 100-400 μm, and are well distributed with the interconnected and open pore wall structure which is necessary for tissue engineering. We investigated the effect of the porosity of scaffolds, the pore size of scaffolds and material of polymer on the mechanical properties of scaffolds. The scaffolds fabricated by the method have more big pores than those by the convenient method of salt leaching.
From spent Mg/Al layered double hydroxide to porous carbon materials.
Laipan, Minwang; Zhu, Runliang; Chen, Qingze; Zhu, Jianxi; Xi, Yunfei; Ayoko, Godwin A; He, Hongping
2015-12-30
Adsorption has been considered as an efficient method for the treatment of dye effluents, but proper disposal of the spent adsorbents is still a challenge. This work attempts to provide a facile method to reutilize the spent Mg/Al layered double hydroxide (Mg/Al-LDH) after the adsorption of orange II (OII). Herein, the spent hybrid was carbonized under the protection of nitrogen, and then washed with acid to obtain porous carbon materials. Thermogravimetric analysis results suggested that the carbonization could be well achieved above 600°C, as mass loss of the spent hybrid gradually stabilized. Therefore, the carbonization process was carried out at 600, 800, and 1000°C, respectively. Scanning electron microscope showed that the obtained carbon materials possessed a crooked flaky morphology. Nitrogen adsorption-desorption results showed that the carbon materials had large BET surface area and pore volume, e.g., 1426 m(2)/g and 1.67 cm(3)/g for the sample carbonized at 800°C. Moreover, the pore structure and surface chemistry compositions were tunable, as they were sensitive to the temperature. Toluene adsorption results demonstrated that the carbon materials had high efficiency in toluene removal. This work provided a facile approach for synthesizing porous carbon materials using spent Mg/Al-LDH.
Cho, Joonil; Ishida, Yasuhiro
2017-07-01
Porous materials with molecular-sized periodic structures, as exemplified by zeolites, metal-organic frameworks, or mesoporous silica, have attracted increasing attention due to their range of applications in storage, sensing, separation, and transformation of small molecules. Although the components of such porous materials have a tendency to pack in unidirectionally oriented periodic structures, such ideal types of packing cannot continue indefinitely, generally ceasing when they reach a micrometer scale. Consequently, most porous materials are composed of multiple randomly oriented domains, and overall behave as isotropic materials from a macroscopic viewpoint. However, if their channels could be unidirectionally oriented over a macroscopic scale, the resultant porous materials might serve as powerful tools for manipulating molecules. Guest molecules captured in macroscopically oriented channels would have their positions and directions well-defined, so that molecular events in the channels would proceed in a highly controlled manner. To realize such an ideal situation, numerous efforts have been made to develop various porous materials with macroscopically oriented channels. An overview of recent studies on the synthesis, properties, and applications of macroscopically oriented porous materials is presented. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
New Carbon-Based Porous Materials with Increased Heats of Adsorption for Hydrogen Storage
Energy Technology Data Exchange (ETDEWEB)
Snurr, Randall Q.; Hupp, Joseph T.; Kanatzidis, Mercouri G.; Nguyen, SonBinh T.
2014-11-03
Hydrogen fuel cell vehicles are a promising alternative to internal combustion engines that burn gasoline. A significant challenge in developing fuel cell vehicles is to store enough hydrogen on-board to allow the same driving range as current vehicles. One option for storing hydrogen on vehicles is to use tanks filled with porous materials that act as “sponges” to take up large quantities of hydrogen without the need for extremely high pressures. The materials must meet many requirements to make this possible. This project aimed to develop two related classes of porous materials to meet these requirements. All materials were synthesized from molecular constituents in a building-block approach, which allows for the creation of an incredibly wide variety of materials in a tailorable fashion. The materials have extremely high surface areas, to provide many locations for hydrogen to adsorb. In addition, they were designed to contain cations that create large electric fields to bind hydrogen strongly but not too strongly. Molecular modeling played a key role as a guide to experiment throughout the project. A major accomplishment of the project was the development of a material with record hydrogen uptake at cryogenic temperatures. Although the ultimate goal was materials that adsorb large quantities of hydrogen at room temperature, this achievement at cryogenic temperatures is an important step in the right direction. In addition, there is significant interest in applications at these temperatures. The hydrogen uptake, measured independently at NREL was 8.0 wt %. This is, to the best of our knowledge, the highest validated excess hydrogen uptake reported to date at 77 K. This material was originally sketched on paper based on a hypothesis that extended framework struts would yield materials with excellent hydrogen storage properties. However, before starting the synthesis, we used molecular modeling to assess the performance of the material for hydrogen uptake
Ignition analysis of a porous energetic material. 2. Ignition at a closed heated end
Energy Technology Data Exchange (ETDEWEB)
Alexander M. Telegentor; Stephen B. Margolis; Forman A. Williams
1998-11-01
A continuation of an ignition analysis for porous energetic materials subjected to a constant energy flux is presented. In the first part, the analysis was developed for the case of an open-end, semi-infinite material such that gas flow, generated by thermal expansion, flowed out of the porous solid, thereby removing energy from the system. In the present study, the case of a closed end is considered, and thus the thermally-induced gas flow is now directed into the solid. In these studies, an asymptotic perturbation analysis, based on the smallness of the gas-to-solid density ratio and the largeness of the activation energy, is utilized to describe the inert and transition stages leading to thermal runaway. In both cases it is found that the effects of porosity provide a leading-order reduction in the time to ignition relative to that for the nonporous problem, arising from the reduced amount of solid material that must be heated and the difference in thermal conductivities of the solid and gaseous phases. A correction to the leading-order ignition-delay time, however, is provided by the convective flow of gas through the solid, and the sign of this correction is shown to depend on the direction of the gas flow. Thus, gas flowing out of an open-end solid was previously shown to give a positive correction to the leading-order time to ignition. Here, however, it is demonstrated that when the flow of gas is directed into the porous solid, the relative transport effects associated with the gas flow serve to preheat the material, resulting in a negative correction and hence a decrease in the ignition-delay time.
Preparation of Nano-porous Materials(Ⅰ) by Polymerization of Amphiphile Self-assemblies
Institute of Scientific and Technical Information of China (English)
无
2003-01-01
The polymerization of amphiphilic self-assemblies is a promising method to synthesize nano-structured materials with novel properties. These materials have many attractive features for their application in biomedical area and materials science, such as catalysis, separation, surface modification, and therapeutics areas. A general review on the polymerization of lipids and surfactant self-assemblies to amphiphilic self-assemblies is given in this paper with 49 参考文献. The polymerization and the subsequently resulted structure of lipids in different morphologies are summarized. The polymerization of polymerizable surfactants(surfmers) in emulsion and liquid crystalline phases are also discussed. The potential application of new nano-porous materials is briefly described.
Effect of Moisture Content on Thermal Properties of Porous Building Materials
Kočí, Václav; Vejmelková, Eva; Čáchová, Monika; Koňáková, Dana; Keppert, Martin; Maděra, Jiří; Černý, Robert
2017-02-01
The thermal conductivity and specific heat capacity of characteristic types of porous building materials are determined in the whole range of moisture content from dry to fully water-saturated state. A transient pulse technique is used in the experiments, in order to avoid the influence of moisture transport on measured data. The investigated specimens include cement composites, ceramics, plasters, and thermal insulation boards. The effect of moisture-induced changes in thermal conductivity and specific heat capacity on the energy performance of selected building envelopes containing the studied materials is then analyzed using computational modeling of coupled heat and moisture transport. The results show an increased moisture content as a substantial negative factor affecting both thermal properties of materials and energy balance of envelopes, which underlines the necessity to use moisture-dependent thermal parameters of building materials in energy-related calculations.
Nano-Tomography of Porous Geological Materials Using Focused Ion Beam-Scanning Electron Microscopy
Directory of Open Access Journals (Sweden)
Yang Liu
2016-10-01
Full Text Available Tomographic analysis using focused ion beam-scanning electron microscopy (FIB-SEM provides three-dimensional information about solid materials with a resolution of a few nanometres and thus bridges the gap between X-ray and transmission electron microscopic tomography techniques. This contribution serves as an introduction and overview of FIB-SEM tomography applied to porous materials. Using two different porous Earth materials, a diatomite specimen, and an experimentally produced amorphous silica layer on olivine, we discuss the experimental setup of FIB-SEM tomography. We then focus on image processing procedures, including image alignment, correction, and segmentation to finally result in a three-dimensional, quantified pore network representation of the two example materials. To each image processing step we consider potential issues, such as imaging the back of pore walls, and the generation of image artefacts through the application of processing algorithms. We conclude that there is no single image processing recipe; processing steps need to be decided on a case-by-case study.
New Porous Material Made from Industrial and Municipal Waste for Building Application
Directory of Open Access Journals (Sweden)
Diana BAJARE
2014-09-01
Full Text Available The aim of this study was to find a new method for usage of the hazardous waste coming from recycling industry. Two hazardous wastes – aluminium recycling final dross or non-metallic product (NMP and lead – silica glass (LSG were investigated. It is generally considered that NMP is a process waste and subject to disposal after residual metal has been recovered from primary dross. NMP is impurities which are removed from the molten metal in dross recycling process and it could be defined as a hazardous waste product in aluminium recycling industry. LSG comes from fluorescence lamp recycling plant and could be classified as hazardous waste due to high amount of lead in the composition and re-melting problems. The new alkali activated material, which can be defined as porous building material, was created. Composition of this material consisted of aluminium recycling waste, recycled fluorescent lamp LSG, sintered kaolin clay as well as commercially available alkali flakes (NaOH and liquid glass (Na2SiO3 + nH2O. Physical and mechanical properties of the obtained material were tested. Density of the obtained material was from (460 – 550 kg/m3 and the total porosity was from 82 % – 83 %. The compressive strength of the material was in range from 1.1 MPa to 2.3 MPa. The thermal conductivity was determined. The pore microstructure was investigated and the mineralogical composition of porous material was determined. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4330
New Porous Material Made from Industrial and Municipal Waste for Building Application
Directory of Open Access Journals (Sweden)
Diana BAJARE
2014-09-01
Full Text Available The aim of this study was to find a new method for usage of the hazardous waste coming from recycling industry. Two hazardous wastes – aluminium recycling final dross or non-metallic product (NMP and lead – silica glass (LSG were investigated. It is generally considered that NMP is a process waste and subject to disposal after residual metal has been recovered from primary dross. NMP is impurities which are removed from the molten metal in dross recycling process and it could be defined as a hazardous waste product in aluminium recycling industry. LSG comes from fluorescence lamp recycling plant and could be classified as hazardous waste due to high amount of lead in the composition and re-melting problems. The new alkali activated material, which can be defined as porous building material, was created. Composition of this material consisted of aluminium recycling waste, recycled fluorescent lamp LSG, sintered kaolin clay as well as commercially available alkali flakes (NaOH and liquid glass (Na2SiO3 + nH2O. Physical and mechanical properties of the obtained material were tested. Density of the obtained material was from (460 – 550 kg/m3 and the total porosity was from 82 % – 83 %. The compressive strength of the material was in range from 1.1 MPa to 2.3 MPa. The thermal conductivity was determined. The pore microstructure was investigated and the mineralogical composition of porous material was determined. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4330
Cherepanov, Valery V.; Alifanov, Oleg M.; Morzhukhina, Alena V.; Budnik, Sergey A.
2016-11-01
The formation mechanisms and the main factors affecting the systematic error of thermocouples were investigated. According to the results of experimental studies and mathematical modelling it was established that in highly porous heat resistant materials for aerospace application the thermocouple errors are determined by two competing mechanisms provided correlation between the errors and the difference between radiation and conduction heat fluxes. The comparative analysis was carried out and some features of the methodical error formation related to the distances from the heated surface were established.
CO2 Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues
Directory of Open Access Journals (Sweden)
Ana Arenillas
2013-10-01
Full Text Available Carbonaceous porous materials derived from leather skin residues have been found to have excellent CO2 adsorption properties, with interestingly high gas selectivities for CO2 (α > 200 at a gas composition of 15% CO2/85% N2, 273K, 1 bar and capacities (>2 mmol·g−1 at 273 K. Both CO2 isotherms and the high heat of adsorption pointed to the presence of strong binding sites for CO2 which may be correlated with both: N content in the leather residues and ultrasmall pore sizes.
Preparation of Filling Porous Osteoconduction Materials and Its Animal Experiment Study
Institute of Scientific and Technical Information of China (English)
CHEN Xiaoming; WANG Jing; CHEN Weimin; LI Dezhong
2011-01-01
Titanium rods were processed into implant samples with cavity and groove in which was filled with HAP/β-TCP porous osteoconduction composite materials in order to increase the mechanical stability of the implant in vivo. The phase compositions of the composite was characterized by X-ray diffraction (XRD) and scanning electron microscopy(SEM). Histological evaluation showed that the biogradable composite could enhanced the ability of new bone formation. The composite can conduct new bone tissue growing into the cavities gradually after implanted into animal, and then achieve mechanical fixation. The filling biogradable compound exhibited excellent biocompatibility, which combined with the new bone tissues tightly without inflammation and loosing.
Cost-effective synthesis of amine-tethered porous materials for carbon capture.
Lu, Weigang; Bosch, Mathieu; Yuan, Daqiang; Zhou, Hong-Cai
2015-02-01
A truly cost-effective strategy for the synthesis of amine-tethered porous polymer networks (PPNs) has been developed. A network containing diethylenetriamine (PPN-125-DETA) exhibits a high working capacity comparable to current state-of-art technology (30 % monoethanolamine solutions), yet it requires only one third as much energy for regeneration. It has also been demonstrated to retain over 90 % capacity after 50 adsorption-desorption cycles of CO2 in a temperature-swing adsorption process. The results suggest that PPN-125-DETA is a very promising new material for carbon capture from flue gas streams.
Directory of Open Access Journals (Sweden)
Njifenjou A.
2006-11-01
different and varying diameters. The macroscopic scale corresponds to a scale in which the local petrophysical parameters are averagedfor volumes liable to contain several geologic structures, such as sand, limestone and clay. The average parameters considered are constants that can be used to make an overall (or macroscopic description of flow in the domain occupied by the porous medium. These are the average parameters that are called the effective petrophysical (or homogenized parameters. They are used to simulate petroleum reservoirs. After having chosen a flow model in a heterogeneous porous medium containing a periodic microstructure, we briefly review the major phases in the multiple-scale method for homogenizing this model. This leads us to a conventional formula giving the coefficients for absolute homogenized permeability (Eq. 26. Then we describe an original procedure for going from the conventional formula to a simpler formula (from the numerical standpoint expressed in terms of energy dissipated by local viscosity forces and characterizing the periodic medium being considered. In this part of the project, an essential phase is the formulating of so-called local equations in a form that better brings out their physical meaning by a judicious change in the unknown function. The integral transformation that results, in the equation for homogenized coefficients, opens up the way to obtaining the above-mentioned simple formula (Eq. 34. We then show, given various assumptions, the equality between the energies dissipated by viscosity forces associated respectively with local and macroscopic flows (Theorems 3 and 4. Theorem 3 is actually a specific case of Theorem 4, which in turn is used to interpret all the homogenized coefficients given by Eq. 34. This project ends with an application to the numerical analysis of an incompressible water/oil two-phase flow that is horizontal and twodimensional, in a heterogeneous porous medium with a periodic structure (Figs. 1a and
Directory of Open Access Journals (Sweden)
P. W. J. Glover
2012-01-01
Full Text Available Frequency-dependent streaming potential coefficient measurements have been made upon Ottawa sand and glass bead packs using a new apparatus that is based on an electromagnetic drive. The apparatus operates in the range 1 Hz to 1 kHz with samples of 25.4 mm diameter up to 150 mm long. The results have been analysed using theoretical models that are either (i based upon vibrational mechanics, (ii treat the geological material as a bundle of capillary tubes, or (iii treat the material as a porous medium. The best fit was provided by the Pride model and its simplification, which is satisfying as this model was conceived for porous media rather than capillary tube bundles. Values for the transition frequency were derived from each of the models for each sample and were found to be in good agreement with those expected from the independently measured effective pore radius of each material. The fit to the Pride model for all four samples was also found to be consistent with the independently measured steady-state permeability, while the value of the streaming potential coefficient in the low-frequency limit was found to be in good agreement with other steady-state streaming potential coefficient data.
Doutres, Olivier; Atalla, Noureddine; Osman, Haisam
2015-06-01
Porous materials are widely used for improving sound absorption and sound transmission loss of vibrating structures. However, their efficiency is limited to medium and high frequencies of sound. A solution for improving their low frequency behavior while keeping an acceptable thickness is to embed resonant structures such as Helmholtz resonators (HRs). This work investigates the absorption and transmission acoustic performances of a cellular porous material with a two-dimensional periodic arrangement of HR inclusions. A low frequency model of a resonant periodic unit cell based on the parallel transfer matrix method is presented. The model is validated by comparison with impedance tube measurements and simulations based on both the finite element method and a homogenization based model. At the HR resonance frequency (i) the transmission loss is greatly improved and (ii) the sound absorption of the foam can be either decreased or improved depending on the HR tuning frequency and on the thickness and properties of the host foam. Finally, the diffuse field sound absorption and diffuse field sound transmission loss performance of a 2.6 m(2) resonant cellular material are measured. It is shown that the improvements observed at the Helmholtz resonant frequency on a single cell are confirmed at a larger scale.
High-Throughput Characterization of Porous Materials Using Graphics Processing Units
Energy Technology Data Exchange (ETDEWEB)
Kim, Jihan; Martin, Richard L.; Rübel, Oliver; Haranczyk, Maciej; Smit, Berend
2012-05-08
We have developed a high-throughput graphics processing units (GPU) code that can characterize a large database of crystalline porous materials. In our algorithm, the GPU is utilized to accelerate energy grid calculations where the grid values represent interactions (i.e., Lennard-Jones + Coulomb potentials) between gas molecules (i.e., CH$_{4}$ and CO$_{2}$) and material's framework atoms. Using a parallel flood fill CPU algorithm, inaccessible regions inside the framework structures are identified and blocked based on their energy profiles. Finally, we compute the Henry coefficients and heats of adsorption through statistical Widom insertion Monte Carlo moves in the domain restricted to the accessible space. The code offers significant speedup over a single core CPU code and allows us to characterize a set of porous materials at least an order of magnitude larger than ones considered in earlier studies. For structures selected from such a prescreening algorithm, full adsorption isotherms can be calculated by conducting multiple grand canonical Monte Carlo simulations concurrently within the GPU.
On wave propagation characteristics in fluid saturated porous materials by a nonlocal Biot theory
Tong, Lihong; Yu, Yang; Hu, Wentao; Shi, Yufeng; Xu, Changjie
2016-09-01
A nonlocal Biot theory is developed by combing Biot theory and nonlocal elasticity theory for fluid saturated porous material. The nonlocal parameter is introduced as an independent variable for describing wave propagation characteristics in poroelastic material. A physical insight on nonlocal term demonstrates that the nonlocal term is a superposition of two effects, one is inertia force effect generated by fluctuation of porosity and the other is pore size effect inherited from nonlocal constitutive relation. Models for situations of excluding fluid nonlocal effect and including fluid nonlocal effect are proposed. Comparison with experiment confirms that model without fluid nonlocal effect is more reasonable for predicting wave characteristics in saturated porous materials. The negative dispersion is observed theoretically which agrees well with the published experimental data. Both wave velocities and quality factors as functions of frequency and nonlocal parameter are examined in practical cases. A few new physical phenomena such as backward propagation and disappearance of slow wave when exceeding critical frequency and disappearing shear wave in high frequency range, which were not predicted by Biot theory, are demonstrated.
Pourchez, Jérémie; Ruot, Bertrand; Debayle, Johan; Rouèche-Pourchez, Emilie; Grosseau, Philippe
2010-01-01
International audience; This paper evaluates and compares the impact of cellulose ethers (CE) on water transport and porous structure of cement-based materials in both fresh and hardened state. Investigations of the porous network (mercury intrusion porosimetry, apparent density, 2D and 3D observations) emphasize an air-entrained stabilisation depending on CE chemistry. We also highlight that CE chemistry leads to a gradual effect on characteristics of the water transport. The global tendenci...
Hysteretic Four-Step Spin Crossover within a Three-Dimensional Porous Hofmann-like Material
Energy Technology Data Exchange (ETDEWEB)
Clements, John E.; Price, Jason R.; Neville, Suzanne M.; Kepert, Cameron J. (Sydney); (Aust. Synch.)
2016-10-21
Materials that display multiple stepped spin crossover (SCO) transitions with accompanying hysteresis present the opportunity for ternary, quaternary, and quinary electronic switching and data storage but are rare in existence. Herein, we present the first report of a four-step hysteretic SCO framework. Single-crystal structure analysis of a porous 3D Hofmann-like material showed long-range ordering of spin states: HS, HS_{0.67}LS_{0.33}, HS_{0.5}LS_{0.5}, HS_{0.33}LS_{0.67}, and LS. These detailed structural studies provide insight into how multistep SCO materials can be rationally designed through control of host–host and host–guest interactions.
Testing a model for the critical degree of saturation at freezing of porous building materials
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
1996-01-01
during freezing. The reliability and usefulness of the model are discussed, e.g. in relation to air-entrained materials and in relation to the description of the pore structure.Keywords: Brick tile, concrete, critical degree of saturation, eigenstrain, fracture mechanics, frost resistance, pore structure......Frost resistance of porous materials can be characterized by the critical degree of saturation, SCR. An experimental determination of SCR is very laborious and therefore only seldom used when testing frost resistance. A theoretical model for prediction of SCR based on fracture mechanics and phase...... of elasticity, tensile strength, amount of freezable water, thermal expansion coefficients and parameters characterizing the pore structure and its effect on strength, modulus of elasticity and volumetric expansion. For the present, the model assumes non air-entrained homogeneous materials subjected to freeze...
A Novel FCC Catalyst Based on a Porous Composite Material Synthesized via an In Situ Technique
Directory of Open Access Journals (Sweden)
Shu-Qin Zheng
2015-11-01
Full Text Available To overcome diffusion limitations and improve transport in microporous zeolite, the materials with a wide-pore structure have been developed. In this paper, composite microspheres with hierarchical porous structure were synthesized by an in situ technique using sepiolite, kaolin and pseudoboehmite as raw material. A novel fluid catalytic cracking (FCC catalyst for maximizing light oil yield was prepared based on the composite materials. The catalyst was characterized by XRD, FT-IR, SEM, nitrogen adsorption-desorption techniques and tested in a bench FCC unit. The results indicated that the catalyst had more meso- and macropores and more acid sites than the reference catalyst, and thus can increase light oil yield by 1.31 %, while exhibiting better gasoline and coke selectivity.
Rollins, Harry W.; Petkovic, Lucia M.; Ginosar, Daniel M.
2011-02-01
Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.
Chae, Kisung
For applications of porous materials in many fields of technological importance, such as catalysis, filtration, separation, energy storage and conversion, the efficiency is often limited by chemical kinetics, and/or diffusion of reactants and products to and from the active sites. Hierarchical nanostructured porous materials (HNPMs) that possess both mesopores (2 nm size size size and the pore wall roughness as well as the microporous structure such as the density and the graphitic pore walls can be independently controlled by synthesis parameters, such as the size of the template, the interaction strength between the template and carbon source, the initial carbon density and the quench rate, respectively. These atomic models allowed us to quantify the structure-mechanical properties relation in aligned carbon nanotubes/amorphous porous carbon nanocomposites. Our study shows that there is an optimum balance between the crystallinity of CNTs and the number bridging bonds between CNTs and the microporous matrix in order for the nanocomposites to have desired mechanical properties such as high stiffness and high buckling resistance under compressive loading. We further used these models to study the effects of the mesopore size and the pore wall roughness on the transport behaviors of methane in HNPCs. Our study shows that some defects in the mesopore walls do not have a significant effect on transport properties, especially in large channels. However, when the walls of small channels become rough, adsorption and transport behaviors change dramatically. Our study shows that the enhanced flow in CNTs observed in experiments is mainly due to the smooth potential energy surface of CNTs with high quality of graphitic walls. In order to carry out a systematic study on pressure-driven gas transport in HNPCs, a computationally efficient reflecting particle method (RPM) together with a perturbation-relaxation loop was developed in this work to make the pressure drop
DEFF Research Database (Denmark)
Hansen, Kurt Kielsgaard; Jensen, Signe Kamp; Gerward, Leif
1999-01-01
The paper describes the dual-energy x-ray equipment, which consists of a x-ray source, filters and a detector. The x-ray beam can be moved automatically in two dimensions relative to a fixed specimen. The purpose of the equipment is to measure simultaneously the density and moisture content......-ray measurements show good agreement with results from the two standard materials which imitate water in a porous material. On this background the dual-energy x-ray absorptiometry measurement principle can be used on porous structural materials....
Supported Intrinsically Porous Oligomers as Hybrid Materials for Separations, Storage, and Sensing
Thompson, Anthony Boone
Adsorption-desorption phenomena are often difficult to study at the molecular level because the surfaces on which they occur can be heterogeneous, giving a wide distribution of adsorption sites and associated energies. Considering that these phenomena underlie an incredibly wide variety of industrially important processes, a better understanding could aid in the development of more efficient methods. In this work, we describe an approach to designing materials with well-defined adsorption sites by covalently attaching intrinsically porous molecules to solid surfaces by a rigid multidentate linker. These cup-shaped molecules are intended to act as adsorption sites on the material, whereas the rigid attachment to the solid support serves to prevent movement and conformational changes of the sites, leading to better understanding of adsorption phenomena. As a proof-of-concept application, materials were used for adsorption of n-butanol biofuel and related compounds from dilute aqueous solution. The materials were thermally and hydrolytically stable, and adsorption phenomena were reversible. Adsorption sites containing more hydrophobic molecular area led to stronger adsorption, suggesting that it is driven by weak van der Waals forces. Likewise, adsorption sites that were strongly polarized performed poorly, possibly reflecting a greater energy penalty of removing water molecules from the cavity. Upon placing a Lewis acidic metal at the bottom of the cavity, an enhancement was seen only with the most acidic metal, which may indicate weak guest coordination. Observing that hydrophobic interactions dominate adsorption on these materials, efforts were made to develop hybrid materials with large hydrophobic area for adsorption. Glaser coupling of diethynylbenzene was used to grow oligo(phenylene butadiynylene)s from the surface of silica, resulting in materials that were more than 25% organic by weight. In addition to their potential use as adsorbents, these materials may
Drainage equations and non-Darcian modelling in coarse porous media or geosynthetic materials
Bordier, C.; Zimmer, D.
2000-03-01
In coarse porous media, Darcy's law is not valid because of turbulence. Different alternative laws have been proposed like Forchheimer's or Izbash's law. In the present study, these two laws were experimentally investigated and have been shown to be equally suitable to describe the flow equation in different coarse materials, namely gravel materials and geosynthetic products. Izbash's law (v n=-λ ni) has been preferred to derive drainage equations because it is in continuity with Darcy's law and facilitates the development of an analytical solution. It has been introduced in Boussinesq's equation, which has been solved by a semi-analytical semi-numerical method. General equations for the drainage of coarse porous media have been derived and incorporated into the drainage model SIDRA, which predicts water-table elevations and drain flow rates for a given net recharge. This allows for comparison (i) between predicted Darcian and non-Darcian behaviours and (ii) between predicted drainage functionings of different coarse materials. Water-table elevations are shown to be much more sensitive to non-Darcian flow equation and to the hydraulic properties of the materials than drain flow rates. Response surface maps of an objective function based on the Nash criterion show that the water-table predictions are almost not sensitive to drainable porosity values. They also indicate that the two parameters of the Izbash flow equation ( λ and n) are dependent for water-table prediction. Based on this result a method is proposed to determine hydraulic properties and drainage systems yielding similar water-table elevations. The results can help choosing between classical granular materials and geocomposite products in drainage systems such as leachate collection systems of landfills.
Probing liquid distribution in partially saturated porous materials with hydraulic admittance.
Cheung, P; Fairweather, J F; Schwartz, D T
2011-09-01
The distribution of two immiscible fluids in a complex porous material during displacement is often central to understanding its function. Characterization of this distribution is traditionally determined via optically transparent flow cells. However, for opaque or thin porous materials of the order of hundreds of microns, optical visualization proves to be difficult and requires sophisticated imaging techniques that are expensive and difficult to come by. We describe here a bench-top tool that dynamically probes the hydraulic pathways leading to each free-interface within a single capillary and a bundle of seven capillaries at various saturations (i.e., hydraulic path lengths). A small volumetric displacement was applied to each interface such that the interfaces remained pinned at the capillary walls and the resultant oscillatory pressure drop was measured to determine the hydraulic admittance at each applied oscillation frequency. When the magnitude of the hydraulic admittance was plotted vs. applied oscillation frequency, a resonance peak was found for each degenerately filled capillary. The corresponding peaks were represented by a half-loop (100% filled) and full loops (partially filled) in a Nyquist plot. We compared the theoretical and measured admittance curves and found good agreement for both capillary systems at high filled states. The theoretical predictions became worse when the hydraulic path length was comparable to the capillary radius. The analysis for the hydraulic admittance of a bundle of capillaries is developed here and experimentally validated for the first time.
Limit analysis and conic programming: `porous Drucker Prager' material and Gurson's model
Trillat, Malorie; Pastor, Joseph; Thoré, Philippe
2006-10-01
Extending a previous work on the Gurson model for a 'porous von Mises' material, the present study first focuses on the yield criterion of a 'porous Drucker-Prager' material with spherical cavities. On the basis of the Gurson micro-macro model and a second order conic programming ( SOCP) formulation, calculated inner and outer approaches to the criterion are very close, providing a reliable estimate of the yield criterion. Comparison with an analytical criterion recently proposed by Barthélémy and Dormieux—from a nonlinear homogenization method—shows both excellent agreement when considering tensile average boundary conditions and substantial improvement under compressive conditions. Then the results of an analogous study in the case of cylindrical cavities in plane strain are presented. It is worth noting that obtaining these results was made possible by using MOSEK, a recent commercial SOCP code, whose impressive efficiency was already seen in our previous works. To cite this article: M. Trillat et al., C. R. Mecanique 334 (2006).
Yang, Zhewei; Guo, Huajun; Li, Xinhai; Wang, Zhixing; Yan, Zhiliang; Wang, Yansen
2016-10-01
Lithium-ion capacitor (LIC) is a novel advanced electrochemical energy storage (EES) system bridging gap between lithium ion battery (LIB) and electrochemical capacitor (ECC). In this work, we report that sisal fiber activated carbon (SFAC) was synthesized by hydrothermal treatment followed by KOH activation and served as capacitive material in LIC for the first time. Different particle structure, morphology, specific surface area and heteroatoms affected the electrochemical performance of as-prepared materials and corresponding LICs. When the mass ratio of KOH to char precursor was 2, hierarchical porous structured SFAC-2 was prepared and exhibited moderate specific capacitance (103 F g-1 at 0.1 A g-1), superior rate capability and cyclic stability (88% capacity retention after 5000 cycles at 1 A g-1). The corresponding assembled LIC (LIC-SC2) with optimal comprehensive electrochemical performance, displayed the energy density of 83 Wh kg-1, the power density of 5718 W kg-1 and superior cyclic stability (92% energy density retention after 1000 cycles at 0.5 A g-1). It is worthwhile that the source for activated carbon is a natural and renewable one and the synthesis method is eco-friendly, which facilitate that hierarchical porous activated carbon has potential applications in the field of LIC and other energy storage systems.
Multi-contrast 3D X-ray imaging of porous and composite materials
Energy Technology Data Exchange (ETDEWEB)
Sarapata, Adrian; Herzen, Julia [Lehrstuhl für Biomedizinische Physik, Physik-Department and Institut für Medizintechnik, Technische Universität München, 85748 Garching (Germany); Ruiz-Yaniz, Maite [Lehrstuhl für Biomedizinische Physik, Physik-Department and Institut für Medizintechnik, Technische Universität München, 85748 Garching (Germany); European Synchrotron Radiation Facility, 38000 Grenoble (France); Zanette, Irene [Lehrstuhl für Biomedizinische Physik, Physik-Department and Institut für Medizintechnik, Technische Universität München, 85748 Garching (Germany); Diamond Light Source, Harwell Science and Innovation Campus, Didcot OX11 0QX (United Kingdom); Rack, Alexander [European Synchrotron Radiation Facility, 38000 Grenoble (France); Pfeiffer, Franz [Lehrstuhl für Biomedizinische Physik, Physik-Department and Institut für Medizintechnik, Technische Universität München, 85748 Garching (Germany); Institut für Diagnostische und Interventionelle Radiologie, Klinikum rechts der Isar, Technische Universität München, 81675 München (Germany)
2015-04-13
Grating-based X-ray computed tomography allows for simultaneous and nondestructive determination of the full X-ray complex index of refraction and the scattering coefficient distribution inside an object in three dimensions. Its multi-contrast capabilities combined with a high resolution of a few micrometers make it a suitable tool for assessing multiple phases inside porous and composite materials such as concrete. Here, we present quantitative results of a proof-of-principle experiment performed on a concrete sample. Thanks to the complementarity of the contrast channels, more concrete phases could be distinguished than in conventional attenuation-based imaging. The phase-contrast reconstruction shows high contrast between the hardened cement paste and the aggregates and thus allows easy 3D segmentation. Thanks to the dark-field image, micro-cracks inside the coarse aggregates are visible. We believe that these results are extremely interesting in the field of porous and composite materials studies because of unique information provided by grating interferometry in a non-destructive way.
An investigation of the influence of acoustic waves on the liquid flow through a porous material.
Poesio, Pietro; Ooms, Gijs; Barake, Sander; van der Bas, Fred
2002-05-01
An experimental and theoretical investigation has been made of the influence of high-frequency acoustic waves on the flow of a liquid through a porous material. The experiments have been performed on Berea sandstone cores. Two acoustic horns were used with frequencies of 20 and 40 kHz, and with maximum power output of 2 and 0.7 kW, respectively. Also, a temperature measurement of the flowing liquid inside the core was made. A high external pressure was applied in order to avoid cavitation. The acoustic waves were found to produce a significant effect on the pressure gradient at constant liquid flow rate through the core samples. During the application of acoustic waves the pressure gradient inside the core decreases. This effect turned out to be due to the decrease of the liquid viscosity caused by an increase in liquid temperature as a result of the acoustic energy dissipation inside the porous material. Also, a theoretical model has been developed to calculate the dissipation effect on the viscosity and on the pressure gradient. The model predictions are in reasonable agreement with the experimental data.
Saito, Yuta; Shimomura, Masatsugu; Yabu, Hiroshi
2014-09-01
High-performance catalysts and photovoltaics are required for building an environmentally sustainable society. Because catalytic and photovoltaic reactions occur at the interfaces between reactants and surfaces, the chemical, physical, and structural properties of interfaces have been the focus of much research. To improve the performance of these materials further, inorganic porous materials with hierarchic porous architectures have been fabricated. The breath figure technique allows preparing porous films by using water droplets as templates. In this study, a valuable preparation method for hierarchic porous inorganic materials is shown. Hierarchic porous materials are prepared from surface-coated inorganic nanoparticles with amphiphilic copolymers having catechol moieties followed by sintering. Micron-scale pores are prepared by using water droplets as templates, and nanoscale pores are formed between the nanoparticles. The fabrication method allows the preparation of hierarchic porous films from inorganic nanoparticles of various shapes and materials.
Development of a Chitosan-Based Biofoam: Application to the Processing of a Porous Ceramic Material
Directory of Open Access Journals (Sweden)
Philippe Michaud
2011-02-01
Full Text Available Developing biofoams constitutes a challenging issue for several applications. The present study focuses on the development of a chitosan-based biofoam. Solutions of chitosan in acetic acid were dried under vacuum to generate foams with high-order structures. Chitosan concentration influenced significantly the morphology of developed porosity and the organization of pores in the material. Physico-chemical characterizations were performed to investigate the effects of chitosan concentration on density and thermal conductivity of foams. Even if chitosan-based biofoams exhibit interesting insulating properties (typically around 0.06 W·m−1·K−1, it has been shown that their durabilities are limited when submitted to a wet media. So, a way of application consists to elaborate a ceramic material with open porosity from a slurry prepared with an organic solvent infiltrating the porous network of the foam.
Ge, Jin; Ye, Yin-Dong; Yao, Hong-Bin; Zhu, Xi; Wang, Xu; Wu, Liang; Wang, Jin-Long; Ding, Hang; Yong, Ni; He, Ling-Hui; Yu, Shu-Hong
2014-04-01
Recently, porous hydrophobic/oleophilic materials (PHOMs) have been shown to be the most promising candidates for cleaning up oil spills; however, due to their limited absorption capacity, a large quantity of PHOMs would be consumed in oil spill remediation, causing serious economic problems. In addition, the complicated and time-consuming process of oil recovery from these sorbents is also an obstacle to their practical application. To solve the above problems, we apply external pumping on PHOMs to realize the continuous collection of oil spills in situ from the water surface with high speed and efficiency. Based on this novel design, oil/water separation and oil collection can be simultaneously achieved in the remediation of oil spills, and the oil sorption capacity is no longer limited to the volume and weight of the sorption material. This novel external pumping technique may bring PHOMs a step closer to practical application in oil spill remediation.
Modelling critical degrees of saturation of porous building materials subjected to freezing
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
1996-01-01
Frost resistance of porous materials can be characterized by the critical degree of saturation, SCR, and the actual degree of saturation, SACT. An experimental determination of SCR is very laborious and therefore only seldom used when testing frost resistance. A theoretical model for prediction...... the pore structure and its effect on strength, modulus of elasticity and volumetric expansion. Also the amount of freezable water and thermal expansion coefficients are involved. For the present, the model assumes non air-entrained homogeneous materials subjected to freeze-thaw without de-icing salts.......The model has been tested on various concretes without air-entrainment and on brick tiles with different porosities. Results agree qualitatively with values of the critical degree of saturation determined by measuring resonance frequencies and length change of sealed specimens during freezing...
Superstructured Carbon Nanotube/Porous Silicon Hybrid Materials for Lithium-Ion Battery Anodes
Lee, Jun-Ki; Kang, Shin-Hyun; Choi, Sung-Min
2015-03-01
High energy Li-ion batteries (LIBs) are in great demand for electronics, electric-vehicles, and grid-scale energy storage. To further increase the energy and power densities of LIBs, Si anodes have been intensively explored due to their high capacity, and high abundance compared with traditional carbon anodes. However, the poor cycle-life caused by large volume expansion during charge/discharge process has been an impediment to its applications. Recently, superstructured Si materials were received attentions to solve above mentioned problem in excellent mechanical properties, large surface area, and fast Li and electron transportation aspects, but applying superstructures to anode is in early stage yet. Here, we synthesized superstructured carbon nanotubes (CNTs)/porous Si hybrid materials and its particular electrochemical properties will be presented. Department of Nuclear and Quantum Engineering
Watt-Smith, M. J.; Rigby, S. P.; Ralph, T. R.; Walsh, F. C.
Porous carbon materials are typically used in both the substrate (typically carbon paper) and the electrocatalyst supports (often platinised carbon) within proton exchange membrane fuel cells. Gravimetric nitrogen adsorption has been studied at a carbon paper substrate, two different Pt-loaded carbon paper electrodes and three particulate carbon blacks. N 2 BET surface areas and surface fractal dimensions were determined using the fractal BET and Frenkel-Halsey-Hill models for all but one of the materials studied. The fractal dimensions of the carbon blacks obtained from gas adsorption were compared with those obtained independently by small angle X-ray scattering and showed good agreement. Density functional theory was used to characterise one of the carbon blacks, as the standard BET model was not applicable.
Micro-Computed Tomography and Finite Element Method Study of Open-Cell Porous Materials
Directory of Open Access Journals (Sweden)
Wejrzanowski Tomasz
2015-01-01
Full Text Available In the present paper the characterization of structure and properties of open-cell porous materials by high-resolution x-ray micro-computed tomography (μCT and finite element method (FEM is addressed. The unique properties of open porosity foams make them interesting in a range of applications in science and engineering such as energy absorbers, lightweight construction materials or heat insulators. Consequently, a detailed knowledge of structure as well as mechanical properties (i.e. Young’s Modulus, Poisson’s Ratio of such foams is essential. The resulting pixel size of the μCT was 40 μm, which enabled satisfactory visualization of the complex foam structure and quantitative characterization. Foam morphology was studied on post-processed computed tomography images, while mechanical properties were analyzed with use of the finite element method on numerical model obtained from μCT results.
Modelling critical degrees of saturation of porous building materials subjected to freezing
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
1996-01-01
the pore structure and its effect on strength, modulus of elasticity and volumetric expansion. Also the amount of freezable water and thermal expansion coefficients are involved. For the present, the model assumes non air-entrained homogeneous materials subjected to freeze-thaw without de-icing salts...... to describe the development of stresses and the pore structure, because a mathematical description of the physical theories explaining the process of freezing of water in porous materials is lacking.Calculations are based on porosity, modulus of elasticity and tensile strength, and parameters characterizing...... involved will be unnecessary, making the model more useful in practice.Keywords: Brick tile, concrete, critical degree of saturation, eigenstrain, fracture mechanics, frost resistance, pore size distribution, pore structure, stress development, theoretical model....
Yield and Solidification of Yield-Stress Materials in Rigid Networks and Porous Structures
Sochi, Taha
2013-01-01
In this paper, we address the issue of threshold yield pressure of yield-stress materials in rigid networks of interconnected conduits and porous structures subject to a pressure gradient. We compare the results as obtained dynamically from solving the pressure field to those obtained statically from tracing the path of the minimum sum of threshold yield pressures of the individual conduits by using the threshold path algorithms. We refute criticisms directed recently to our previous findings that the pressure field solution generally produces a higher threshold yield pressure than the one obtained by the threshold path algorithms. Issues related to the solidification of yield stress materials in their transition from fluid phase to solid state have also been investigated and assessed as part of the investigation of the yield point.
An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials
Zhai, Quan-Guo; Bu, Xianhui; Mao, Chengyu; Zhao, Xiang; Daemen, Luke; Cheng, Yongqiang; Ramirez-Cuesta, Anibal J.; Feng, Pingyun
2016-12-01
Metal-organic frameworks are a class of crystalline porous materials with potential applications in catalysis, gas separation and storage, and so on. Of great importance is the development of innovative synthetic strategies to optimize porosity, composition and functionality to target specific applications. Here we show a platform for the development of metal-organic materials and control of their gas sorption properties. This platform can accommodate a large variety of organic ligands and homo- or hetero-metallic clusters, which allows for extraordinary tunability in gas sorption properties. Even without any strong binding sites, most members of this platform exhibit high gas uptake capacity. The high capacity is accomplished with an isosteric heat of adsorption as low as 20 kJ mol-1 for carbon dioxide, which could bring a distinct economic advantage because of the significantly reduced energy consumption for activation and regeneration of adsorbents.
Synthesis of Nanoscale Lithium-Ion Battery Cathode Materials Using a Porous Polymer Precursor Method
Deshazer, H.D.
2011-01-01
Fine particles of metal oxides with carefully controlled compositions can be easily prepared by the thermal decomposition of porous polymers, such as cellulose, into which solutions containing salts of the desired cations have been dissolved. This is a simple and versatile method that can be used to produce a wide variety of materials with a range of particle sizes and carefully controlled chemical compositions. Examples of the use of this method to produce fine particles of LiCoO2 and Li(NiMnCo)1/3O2, which are used in the positive electrodes of lithium-ion batteries, are shown. Experiments have demonstrated that materials made using this method can have electrochemical properties comparable to those typically produced by more elaborate procedures. © 2011 The Electrochemical Society.
Two-phase flow in refrigeration systems
Gu, Junjie; Gan, Zhongxue
2013-01-01
Two-Phase Flow in Refrigeration Systems presents recent developments from the authors' extensive research programs on two-phase flow in refrigeration systems. This book covers advanced mass and heat transfer and vapor compression refrigeration systems and shows how the performance of an automotive air-conditioning system is affected through results obtained experimentally and theoretically, specifically with consideration of two-phase flow and oil concentration. The book is ideal for university postgraduate students as a textbook, researchers and professors as an academic reference book, and b
Applicability of Washburn capillary rise for determining contact angles of powders/porous materials.
Kirdponpattara, Suchata; Phisalaphong, Muenduen; Newby, Bi-min Zhang
2013-05-01
The Washburn capillary rise (WCR) technique has been widely utilized for determining contact angles of powders or porous materials; however, there are concerns regarding powder size and powder packing, especially for materials that exhibit large contact angle hysteresis. In this paper, some of these concerns were addressed. Due to the large water contact angle hysteresis on flat nylon 6/6 films, these films were ground into powders of different sizes and then used as model packing materials. The powders were packed in glass tubes to result in various packing structures that affected the penetration (i.e. advancing) rate of the test liquids. While all advancing contact angles obtained from WCR were found to be overestimated, more reasonable values were resulted when relatively large powders (e.g. 500-2000 μm) were used to pack the tubes. With larger powders, the packing contained bigger voids and consequently lead to slower penetration rates of the liquids, hence a relatively smaller advancing contact angle. The smaller advancing contact angle obtained from the slower advancing rate was also observed by using the sessile drop method. To verify the applicability of using large powders (500-2000 μm) for contact angle determination by using WCR, the advancing water contact angles of a bacterial cellulose/alginate composite sponge (BCA) with and without UV/ozone treatment were measured. The results showed that by using relatively large powders, WCR could be applied to obtain a reasonable advancing contact angle and assess the wettability change of complex porous materials.
Agoras, M.; Ponte Castañeda, P.
2013-03-01
Analytical estimates are obtained for the effective constitutive response of porous viscoplastic materials consisting of aligned ellipsoidal voids that are distributed randomly with "ellipsoidal" symmetry in the matrix material. These estimates are obtained by means of a novel iterative homogenization strategy recently proposed by Ponte Castañeda (2012), and can be shown to be bounds for certain classes of multi-scale microstructures. By design, the resulting constitutive model agrees exactly with the earlier "variational linear comparison" model at the first iteration (N=1), and provides estimates that get progressively more accurate as the number of iterations increases (N→∞), especially for high-triaxiality loading conditions, and low porosity and strain-rate sensitivity. However, in practice, a small number of iterations (N≈10) is sufficient to get very accurate results. It is important to emphasize that, unlike other models that have been proposed in the literature, the new model requires no fitting parameters, solely depending on the properties of the matrix phase and microstructural information, such as the porosity, the average void shape and orientation, as well as the generally different shape and orientation of their distribution. Results are given for the yield and gauge surfaces of ideally plastic and power-law viscoplastic porous materials for the special cases of aligned spheroidal and ellipsoidal voids, and the results are compared with available numerical results and with the results of other models. Compared to available numerical results, the new estimates are found to be quite accurate, while they also provide more flexibility than competing models in terms of the characterization of the microstructure. In particular, it was found that the effect of different shapes for the average pore shape and distribution on the yield surfaces of the porous materials can be significant at high triaxialities, even for very small porosities. In addition
Two-phase flow studies. Final report
Energy Technology Data Exchange (ETDEWEB)
Kestin, J.; Maeder, P.F.
1980-08-01
Progress on the following is reported: literature survey, design of two-phase flow testing facility, design of nozzle loop, thermophysical properties, design manual, and advanced energy conversion systems. (MHR)
Paper pulp waste—A new source of raw material for the synthesis of a porous ceramic composite
Indian Academy of Sciences (India)
Subrata Dasgupta; Swapan Kumar Das
2002-10-01
A synthetic porous ceramic composite material consisting of the mullite, cordierite and cristobalite phases is produced from a mixture of paper pulp waste and clay by reaction sintering at 1400°C. Physicomechanical properties such as bulk density, porosity, cold crushing strength and cold modulus of rupture have been studied. The presence of mullite, cordierite, cristobalite and quartz as major phases and montellecite, tatanite, forsterite and anorthite as minor phases have been confirmed by X-ray diffraction pattern. SEM studies revealed the presence of well developed needle shaped mullite and quartz crystals. The paper also discusses the possible uses of this type of porous composite material.
Binder, Andrea; Zirkelbach, Daniel; Künzel, Hartwig
2010-05-01
Applying an interior insulation often is the only option for a thermal retrofit, especially when heritage buildings are concerned. In doing so, the original construction becomes colder in winter and interstitial condensation may occur. The common way to avoid harmful condensation beneath the interior insulation of the external wall is the installation of a vapor barrier. Since such a barrier works both ways, it may adversely affect the drying potential of the wall during the warmer seasons. One way to avoid the problems described is the installation of an interior insulation system without a vapor barrier to the inside. Here, the effect of capillary transport in porous hydrophilic media is used to conduct condensing moisture away from the wall/insulation interface back to the surface in contact with the indoor air. Following an increasing demand, several water wicking insulation materials (e.g. Calcium-silicate, Autoclave Aerated Concrete based mineral foam, hydrophilic Glass fiber, Cellulose fiber) have appeared on the market. In the past, different methods have been developed to measure and describe the liquid transport properties of hydrophilic porous media. However, the evaluation of the moisture transport mechanisms and their efficiency in this special field of implementation is very complex because of the interacting vapor- and liquid moisture transfer processes. Therefore, there is no consensus yet on its determination and quantification.
Monodisperse porous silicon spheres as anode materials for lithium ion batteries.
Wang, Wei; Favors, Zachary; Ionescu, Robert; Ye, Rachel; Bay, Hamed Hosseini; Ozkan, Mihrimah; Ozkan, Cengiz S
2015-03-05
Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g(-1). In particular, reversible Li storage capacities above 1500 mAh g(-1) were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.
Ekemen, Zeynep; Ahmad, Zeeshan; Stride, Eleanor; Kaplan, David; Edirisinghe, Mohan
2013-05-13
Conventional fabrication techniques and structures employed in the design of silk fibroin (SF) based porous materials provide only limited control over pore size and require several processing stages. In this study, it is shown that, by utilizing electrohydrodynamic bubbling, not only can new hollow spherical structures of SF be formed in a single step by means of bubbles, but the resulting bubbles can serve as pore generators when dehydrated. The bubble characteristics can be controlled through simple adjustments to the processing parameters. Bubbles with diameters in the range of 240-1000 μm were fabricated in controlled fashion. FT-IR characterization confirmed that the rate of air infused during processing enhanced β-sheet packing in SF at higher flow rates. Dynamic mechanical analysis also demonstrated a correlation between air flow rate and film tensile strength. Results indicate that electrohydrodynamically generated SF and their composite bubbles can be employed as new tools to generate porous structures in a controlled manner with a range of potential applications in biocoatings and tissue engineering scaffolds.
Cheng, Long; Jia, Yun; Oueslati, Abdelbacet; de Saxcé, Géry; Kondo, Djimedo
2015-04-01
In Gurson's footsteps, different authors have proposed macroscopic plastic models for porous solid with pressure-sensitive dilatant matrix obeying the normality law (associated materials). The main objective of the present paper is to extend this class of models to porous materials in the context of non-associated plasticity. This is the case of Drucker-Prager matrix for which the dilatancy angle is different from the friction one, and classical limit analysis theory cannot be applied. For such materials, the second last author has proposed a relevant modeling approach based on the concept of bipotential, a function of both dual variables, the plastic strain rate and stress tensors. On this ground, after recalling the basic elements of the Drucker-Prager model, we present the corresponding variational principles and the extended limit analysis theorems. Then, we formulate a new variational approach for the homogenization of porous materials with a non-associated matrix. This is implemented by considering the hollow sphere model with a non-associated Drucker-Prager matrix. The proposed procedure delivers a closed-form expression of the macroscopic bifunctional from which the criterion and a non-associated flow rule are readily obtained for the porous material. It is shown that these general results recover several available models as particular cases. Finally, the established results are assessed and validated by comparing their predictions to those obtained from finite element computations carried out on a cell representing the considered class of materials.
Čapek, Jaroslav; Vojtěch, Dalibor
2014-02-01
There has recently been an increased demand for porous magnesium materials in many applications, especially in the medical field. Powder metallurgy appears to be a promising approach for the preparation of such materials. Many works have dealt with the preparation of porous magnesium; however, the effect of sintering conditions on material properties has rarely been investigated. In this work, we investigated porous magnesium samples that were prepared by powder metallurgy using ammonium bicarbonate spacer particles. The effects of the purity of the argon atmosphere and sintering time on the microstructure (SEM, EDX and XRD) and mechanical behaviour (universal loading machine and Vickers hardness tester) of porous magnesium were studied. The porosities of the prepared samples ranged from 24 to 29 vol.% depending on the sintering conditions. The purity of atmosphere played a significant role when the sintering time exceeded 6h. Under a gettered argon atmosphere, a prolonged sintering time enhanced diffusion connections between magnesium particles and improved the mechanical properties of the samples, whereas under a technical argon atmosphere, oxidation at the particle surfaces caused deterioration in the mechanical properties of the samples. These results suggest that a refined atmosphere is required to improve the mechanical properties of porous magnesium.
New Carbon-Based Porous Materials with Increased Heats of Adsorption for Hydrogen Storage
Energy Technology Data Exchange (ETDEWEB)
Snurr, Randall Q.; Hupp, Joseph T.; Kanatzidis, Mercouri G.; Nguyen, SonBinh T.
2014-11-03
Hydrogen fuel cell vehicles are a promising alternative to internal combustion engines that burn gasoline. A significant challenge in developing fuel cell vehicles is to store enough hydrogen on-board to allow the same driving range as current vehicles. One option for storing hydrogen on vehicles is to use tanks filled with porous materials that act as “sponges” to take up large quantities of hydrogen without the need for extremely high pressures. The materials must meet many requirements to make this possible. This project aimed to develop two related classes of porous materials to meet these requirements. All materials were synthesized from molecular constituents in a building-block approach, which allows for the creation of an incredibly wide variety of materials in a tailorable fashion. The materials have extremely high surface areas, to provide many locations for hydrogen to adsorb. In addition, they were designed to contain cations that create large electric fields to bind hydrogen strongly but not too strongly. Molecular modeling played a key role as a guide to experiment throughout the project. A major accomplishment of the project was the development of a material with record hydrogen uptake at cryogenic temperatures. Although the ultimate goal was materials that adsorb large quantities of hydrogen at room temperature, this achievement at cryogenic temperatures is an important step in the right direction. In addition, there is significant interest in applications at these temperatures. The hydrogen uptake, measured independently at NREL was 8.0 wt %. This is, to the best of our knowledge, the highest validated excess hydrogen uptake reported to date at 77 K. This material was originally sketched on paper based on a hypothesis that extended framework struts would yield materials with excellent hydrogen storage properties. However, before starting the synthesis, we used molecular modeling to assess the performance of the material for hydrogen uptake
Reznik, S. V.; Prosuntsov, P. V.; Mikhailovskii, K. V.
2015-05-01
A procedure for predicting thermophysical and thermomechanical characteristics of porous carbon-ceramic composite materials of the heat shield of aerospace craft as functions of the type of reinforcement, porosity of the structure, and the characteristics of the material's components has been developed. Results of mathematical modeling of the temperature and stressed-strained states of representative volume elements for determining the characteristics of a carbon-ceramic composite material with account taken of its anisotropy have been given.
Mathematical modeling of disperse two-phase flows
Morel, Christophe
2015-01-01
This book develops the theoretical foundations of disperse two-phase flows, which are characterized by the existence of bubbles, droplets or solid particles finely dispersed in a carrier fluid, which can be a liquid or a gas. Chapters clarify many difficult subjects, including modeling of the interfacial area concentration. Basic knowledge of the subjects treated in this book is essential to practitioners of Computational Fluid Dynamics for two-phase flows in a variety of industrial and environmental settings. The author provides a complete derivation of the basic equations, followed by more advanced subjects like turbulence equations for the two phases (continuous and disperse) and multi-size particulate flow modeling. As well as theoretical material, readers will discover chapters concerned with closure relations and numerical issues. Many physical models are presented, covering key subjects including heat and mass transfers between phases, interfacial forces and fluid particles coalescence and breakup, a...
A mechanical erosion model for two-phase mass flows
Pudasaini, Shiva P
2016-01-01
Erosion, entrainment and deposition are complex and dominant, but yet poorly understood, mechanical processes in geophysical mass flows. Here, we propose a novel, process-based, two-phase, erosion-deposition model capable of adequately describing these complex phenomena commonly observed in landslides, avalanches, debris flows and bedload transport. The model is based on the jump in the momentum flux including changes of material and flow properties along the flow-bed interface and enhances an existing general two-phase mass flow model (Pudasaini, 2012). A two-phase variably saturated erodible basal morphology is introduced and allows for the evolution of erosion-deposition-depths, incorporating the inherent physical process including momentum and rheological changes of the flowing mixture. By rigorous derivation, we show that appropriate incorporation of the mass and momentum productions or losses in conservative model formulation is essential for the physically correct and mathematically consistent descript...
Modeling the macroscopic behavior of two-phase nonlinear composites by infinite-rank laminates
Idiart, Martín I.
A new approach is proposed for estimating the macroscopic behavior of two-phase nonlinear composites with random, particulate microstructures. The central idea is to model composites by sequentially laminated constructions of infinite rank whose macroscopic behavior can be determined exactly. The resulting estimates incorporate microstructural information up to the two-point correlation functions, and require the solution to a Hamilton-Jacobi equation with the inclusion concentration and the macroscopic fields playing the role of 'time' and 'spatial' variables, respectively. Because they are realizable, by construction, these estimates are guaranteed to be convex, to satisfy all pertinent bounds, to exhibit no duality gap, and to be exact to second order in the heterogeneity contrast. Sample results are provided for two- and three-dimensional power-law composites, and are compared with other homogenization estimates, as well as with numerical simulations available from the literature. The estimates are found to give physically sensible predictions for all the cases considered, even for extreme values of the nonlinearity and heterogeneity contrast. Interestingly, in the case of isotropic porous materials under hydrostatic loadings, the estimates agree exactly with standard Gurson-type models for viscoplastic porous media.
Pore chemistry and size control in hybrid porous materials for acetylene capture from ethylene
Cui, X.
2016-05-20
The trade-off between physical adsorption capacity and selectivity of porous materials is a major barrier for efficient gas separation and purification through physisorption. We report control over pore chemistry and size in metal coordination networks with hexafluorosilicate and organic linkers for the purpose of preferential binding and orderly assembly of acetylene molecules through cooperative host-guest and/or guest-guest interactions. The specific binding sites for acetylene are validated by modeling and neutron powder diffraction studies. The energies associated with these binding interactions afford high adsorption capacity (2.1 millimoles per gram at 0.025 bar) and selectivity (39.7 to 44.8) for acetylene at ambient conditions. Their efficiency for the separation of acetylene/ethylene mixtures is demonstrated by experimental breakthrough curves (0.73 millimoles per gram from a 1/99 mixture).
Separation of C2 Hydrocarbons by Porous Materials: Metal Organic Frameworks as Platform
Energy Technology Data Exchange (ETDEWEB)
Banerjee, Debasis; Liu, Jun; Thallapally, Praveen K.
2014-12-22
The effective separation of small hydrocarbon molecules (C1 – C4) is an important process for petroleum industry, determining the end price of many essential commodities in our daily lives. Current technologies for separation of these molecules rely on energy intensive fractional distillation processes at cryogenic temperature, which is particularly difficult because of their similar volatility. In retrospect, adsorptive separation using solid state adsorbents might be a cost effective alternative. Several types of solid state adsorbents (e.g. zeolite molecular sieves) were tested for separation of small hydrocarbon molecules as a function of pressure, temperature or vacuum. Among different types of plausible adsorbents, metal organic frameworks (MOFs), a class of porous, crystalline, inorganic-organic hybrid materials, is particularly promising. In this brief comment article, we discuss the separation properties of different types of solid state adsorbents, with a particular emphasis on MOF based adsorbents for separation of C2 hydrocarbon molecules.
The Influences of Ultrasonic on Embedding Nano Particles into Porous Fabric Materials
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
The feasibility of embedding 40 nm ZnO particles into porous textile material by using ultrasonic and its influence factors were studied. Through investigations, it is proved that the higher the concentration of nanoparticle suspension is, the higher the weight of embedding percentage (EPW) is. However, the increasing trend of EPW will minish quickly when the concentration exceeds 1%. In addition, the longer the process time of ultrasonic is, the higher EPW is. EPW is always higher when the distance between film and ultrasonic transducer is 1/2λ and 3/2λ, and lower when the distance is 1λ and 2λ. For 40 nm ZnO particles, EPW of the film effected by ultrasonic with the frequency of 42 kHz reaches the maximum.
Investigations on deflagration to detonation transition in porous energetic materials. Final report
Energy Technology Data Exchange (ETDEWEB)
Stewart, D.S. [Univ. of Illinois, Urbana, IL (United States)
1999-07-01
The research carried out by this contract was part of a larger effort funded by LANL in the areas of deflagration to detonation in porous energetic materials (DDT) and detonation shock dynamics in high explosives (DSD). In the first three years of the contract the major focus was on DDT. However, some researchers were carried out on DSD theory and numerical implementation. In the last two years the principal focus of the contract was on DSD theory and numerical implementation. However, during the second period some work was also carried out on DDT. The paper discusses DDT modeling and DSD modeling. Abstracts are included on the following topics: modeling deflagration to detonation; DSD theory; DSD wave front tracking; and DSD program burn implementation.
Energy Technology Data Exchange (ETDEWEB)
Starbird, Ricardo, E-mail: ricardo.starbird@tu-harburg.de [Institute of Optical and Electronic Materials, Hamburg University of Technology, Hamburg, 21073 (Germany); García-González, Carlos A.; Smirnova, Irina [Institute of Thermal Separation Processes, Hamburg University of Technology, Hamburg, 21073 (Germany); Krautschneider, Wolfgang H. [Institute of Nanoelectronics, Hamburg University of Technology, Hamburg (Germany); Bauhofer, Wolfgang [Institute of Optical and Electronic Materials, Hamburg University of Technology, Hamburg, 21073 (Germany)
2014-04-01
We report the development of an organic conducting mesoporous material, as coat for invasive electrodes, by a novel methodology based on the use of starch aerogel as template. The poly(3,4-ethylenedioxythiophene) (PEDOT) aerogel was synthesized by polymerization of 3,4-ethylenedioxythiophene within a saturated starch aerogel with iron (III) p-toluenesulfonate (oxidizing agent) and subsequent removal of the polysaccharide template, followed by supercritical CO{sub 2} drying. The chemical structure and oxidation state of the resulting material were studied by Raman spectroscopy. The morphology and surface properties of the obtained nanoporous material were investigated by scanning electron microscopy (SEM), micro computed tomography (μCT) and nitrogen adsorption–desorption techniques. The composition and thermal behaviour were evaluated by energy dispersive spectroscopy (EDS) and thermogravimetric analysis (TGA) respectively. A preliminary biocompatibility test verified the non-cytotoxic effects of the PEDOT aerogel. The large surface area and wide pore size distribution of the PEDOT conductive aerogel, along with its electrical properties, enable it to be used as extracellular matrix scaffold for biomedical applications. - Highlights: • Conductive porous material (PEDOT) was obtained using starch aerogel as template • The large mesoporous surface allows its use as extracellular matrix scaffold • The conductive organic aerogel is a suitable coat for chronic invasive electrodes • Gold electrodes coated with PEDOT aerogel showed a significant reduction of the impedance.
Energy Technology Data Exchange (ETDEWEB)
Pang, Xin-Jing; Zhang, Juan; Qi, Gong-Wei; Dai, Xiao-Hui; Zhou, Jun-Ping [School of Chemistry and Chemical Engineering, Shandong University, No. 27, Shanda Nan Rd., Jinan 250100 (China); Zhang, Shu-Yong, E-mail: syzhang@sdu.edu.cn [School of Chemistry and Chemical Engineering, Shandong University, No. 27, Shanda Nan Rd., Jinan 250100 (China); National Key Lab of Crystal, Shandong University, No. 27, Shanda Nan Rd., Jinan 250100 (China)
2015-08-15
Highlights: • Electrochemical performance of Fe{sub 3}O{sub 4} is improved by combining different approaches. • Porous Cu substrate is used to enlarge surface area and improve conductivity. • MWCNT is used to reinforce the electrode structure and change morphology of Fe{sub 3}O{sub 4}. • Reversible capacity, capacity retention and high-rate performance are improved. - Abstract: Multi-walled carbon nanotube-reinforced porous iron oxide (Fe{sub 3}O{sub 4}/MWCNT) is synthesized by a two-step approach with porous Cu substrate serving as current collector. Porous Cu substrate is prepared through electroless deposition with hydrogen bubble serving as template. Fe{sub 3}O{sub 4}/MWCNT composites are prepared by the electrodeposition of Fe{sub 3}O{sub 4} in the presence of dispersed MWCNTs from a Fe{sub 2}(SO{sub 4}){sub 3} solution with MWCNT suspension. Results showed that Fe{sub 3}O{sub 4} forms granular nanoparticles on the porous Cu substrate with several MWCNTs embedded in it. Adding MWCNTs changes the morphology of Fe{sub 3}O{sub 4}. Smooth Fe{sub 3}O{sub 4}, smooth Fe{sub 3}O{sub 4}/MWCNT, and porous Fe{sub 3}O{sub 4} composites are also prepared for comparison. When used as anode materials, porous Fe{sub 3}O{sub 4}/MWCNT composites have a reversible capacity of approximately 601 mA h g{sup −1} at the 60th cycle at a cycling rate of 100 mA g{sup −1}. This value is higher than that of the other materials. The reversible capacity at a cycling rate of 10,000 mA g{sup −1} is approximately 50% of that at 100 mA g{sup −1}. Therefore, the MWCNT-reinforced porous Fe{sub 3}O{sub 4} composite exhibits much better reversible capacity, capacity retention, and high-rate performance than the other samples. This finding can be ascribed to the porous structure of Fe{sub 3}O{sub 4}, better conductivity of porous Cu substrate and MWCNTs, and the morphology change of Fe{sub 3}O{sub 4} nanoparticles upon the addition of MWCNTs.
Amine Functionalized Porous Network
Eddaoudi, Mohamed
2015-05-28
Amine groups can be introduced in porous materials by a direct (one pot) or post-synthetic modification (PSM) process on aldehyde groups, and the resulting porous materials have increased gas affinity.
Numerical modeling of two-phase binary fluid mixing using mixed finite elements
Sun, Shuyu
2012-07-27
Diffusion coefficients of dense gases in liquids can be measured by considering two-phase binary nonequilibrium fluid mixing in a closed cell with a fixed volume. This process is based on convection and diffusion in each phase. Numerical simulation of the mixing often requires accurate algorithms. In this paper, we design two efficient numerical methods for simulating the mixing of two-phase binary fluids in one-dimensional, highly permeable media. Mathematical model for isothermal compositional two-phase flow in porous media is established based on Darcy\\'s law, material balance, local thermodynamic equilibrium for the phases, and diffusion across the phases. The time-lag and operator-splitting techniques are used to decompose each convection-diffusion equation into two steps: diffusion step and convection step. The Mixed finite element (MFE) method is used for diffusion equation because it can achieve a high-order and stable approximation of both the scalar variable and the diffusive fluxes across grid-cell interfaces. We employ the characteristic finite element method with moving mesh to track the liquid-gas interface. Based on the above schemes, we propose two methods: single-domain and two-domain methods. The main difference between two methods is that the two-domain method utilizes the assumption of sharp interface between two fluid phases, while the single-domain method allows fractional saturation level. Two-domain method treats the gas domain and the liquid domain separately. Because liquid-gas interface moves with time, the two-domain method needs work with a moving mesh. On the other hand, the single-domain method allows the use of a fixed mesh. We derive the formulas to compute the diffusive flux for MFE in both methods. The single-domain method is extended to multiple dimensions. Numerical results indicate that both methods can accurately describe the evolution of the pressure and liquid level. © 2012 Springer Science+Business Media B.V.
Institute of Scientific and Technical Information of China (English)
Dali ZHOU; Weizhong YANG; Guangfu Yin; Changqiong ZHENG; Yun ZHANG; Huaiqing CHEN; Rui CHEN
2004-01-01
To develop a novel degradable poly (L-lactic acid)/β-tricalcium phosphate (PLLA/β-TCP) bioactive materials for bone tissue engineering, β-TCP powder was produced by a new wet process. Porous scaffolds were prepared by three steps, I.e. Solvent casting, compression molding and leaching stage. Factors influencing the compressive strength and the degradation behavior of the porous scaffold, e.g. Weight fraction of pore forming agent-sodium chloride (NaCl), weight ratio of PLLA: β-TCP, the particle size ofβ-TCP and the porosity, were discussed in details. Rat marrow stromal cells (RMSC) were incorporated into the composite by tissue engineering approach. Biological and osteogenesis potential of the composite scaffold were determined with MTT assay, alkaline phosphatase (ALP) activity and bone osteocalcin (OCN) content evaluation. Results show that PLLA/β-TCP bioactive porous scaffold has good mechanical and pore structure with adjustable compressive strength needed for surgery. RMSCs seeding on porous PLLA/β-TCP composite behaves good seeding efficacy, biocompatibility and osteoinductive potential. Osteoprogenitor cells could well penetrate into the material matrix and begin cell proliferation and osteogenic differentiation. Osseous matrix could be formed on the surface of the composite after culturing in vitro. It is expected that the PLLA/β-TCP porous composites are promising scaffolds for bone tissue engineering in prosthesis surgery.
Song; Bolton
2000-03-01
A method for evaluating the acoustical properties of homogeneous and isotropic porous materials that may be modeled as fluids having complex properties is described here. To implement the procedure, a conventional, two-microphone standing wave tube was modified to include: a new sample holder; a section downstream of the sample holder that accommodated a second pair of microphone holders and an approximately anechoic termination. Sound-pressure measurements at two upstream and two downstream locations were then used to estimate the two-by-two transfer matrix of porous material samples. The experimental transfer matrix method has been most widely used in the past to measure the acoustical properties of silencer system components. That procedure was made more efficient here by taking advantage of the reciprocal nature of sound transmission through homogeneous and isotropic porous layers. The transfer matrix of a homogeneous and isotropic, rigid or limp porous layer can easily be used to identify the material's characteristic impedance and wave number, from which other acoustical quantities of interest can be calculated. The procedure has been used to estimate the acoustical properties of a glass fiber material: good agreement was found between the estimated acoustical properties and those predicted by using the formulas of Delany and Bazley.
A FINITE ELEMENT COLLOCATION METHOD FOR TWO-PHASE INCOMPRESSIBLE IMMISCIBLE PROBLEMS
Institute of Scientific and Technical Information of China (English)
Ma Ning
2007-01-01
Two-phase, incompressible, immiscible flow in porous media is governed by a coupled system of nonlinear partial differential equations. The pressure equation is elliptic,whereas the concentration equation is parabolic, and both are treated by the collocation scheme. Existence and uniqueness of solutions of the algorithm are proved. A optimal convergence analysis is given for the method.
Strength degradation and failure limits of dense and porous ceramic membrane materials
DEFF Research Database (Denmark)
Pećanac, G.; Foghmoes, Søren Preben Vagn; Lipińska-Chwałek, M.;
2013-01-01
Thin dense membrane layers, mechanically supported by porous substrates, are considered as the most efficient designs for oxygen supply units used in Oxy-fuel processes and membrane reactors. Based on the favorable permeation properties and chemical stability, several materials were suggested...... as promising membrane and substrate materials: Ba0.5Sr0.5Co0.8Fe0.2O3−δ, La0.6−xSr0.4Co0.2Fe0.8O3−δ (x=0, 0.02) and Ce0.9Gd0.1O1.95−δ. Although membranes operate at elevated temperatures, the ends of tubes in certain three-end concepts remain almost at room temperature. The current work concentrates...... on the failure potential of these membrane parts, where in a complex device also the highest residual stresses should arise due to differences in thermal expansion. In particular, sensitivity of the materials to subcritical crack growth was assessed since the long-term reliability of the component does not only...
All-carbon-based porous topological semimetal for Li-ion battery anode material.
Liu, Junyi; Wang, Shuo; Sun, Qiang
2017-01-24
Topological state of matter and lithium batteries are currently two hot topics in science and technology. Here we combine these two by exploring the possibility of using all-carbon-based porous topological semimetal for lithium battery anode material. Based on density-functional theory and the cluster-expansion method, we find that the recently identified topological semimetal bco-C16 is a promising anode material with higher specific capacity (Li-C4) than that of the commonly used graphite anode (Li-C6), and Li ions in bco-C16 exhibit a remarkable one-dimensional (1D) migration feature, and the ion diffusion channels are robust against the compressive and tensile strains during charging/discharging. Moreover, the energy barrier decreases with increasing Li insertion and can reach 0.019 eV at high Li ion concentration; the average voltage is as low as 0.23 V, and the volume change during the operation is comparable to that of graphite. These intriguing theoretical findings would stimulate experimental work on topological carbon materials.
MINIMUM SOLID AREA MODELS FOR THE EFFECTIVE PROPERTIES OF POROUS MATERIALS - A REFUTATION
Directory of Open Access Journals (Sweden)
Willi Pabst
2015-09-01
Full Text Available Minimum solid area (MSA models are popular models for the calculation of the effective properties of porous materials and are frequently used to justify the use of a simple exponential relation for fitting purposes. In this contribution it is shown that MSA models, and the simple exponentials they support, are misleading and should be avoided. In particular, taking Young modulus and conductivity (thermal or electrical as examples, it is shown that MSA models are based on the unjustified (and unjustifiable hypothesis that the relative Young modulus and relative conductivity are identical, and moreover equal to the MSA fraction itself. This claim is generally false for isotropic materials, both random or periodic. Although indeed a very specific case exists in which this claim is true for the properties in one specific direction (viz., extremely anisotropic materials with translational invariance, in this specific case MSA models are redundant, because the relative properties are given exactly by the volume- or area-weighted arithmetic mean. It is shown that the mere existence of non-trivial cross-property relations is incompatible with the existence of MSA models. Finally, it is shown by numerical (finite-element modeling that MSA models provide incorrect results even in the simplest of the cases for which they were originally designed, i.e. for simple cubic packings of partially sintered isometric (initially spherical grains. Therefore, paraphrasing Box, MSA models are not only wrong, but also useless, and should be abandoned.
Development and evaluation of porous materials for carbon dioxide separation and capture.
Bae, Youn-Sang; Snurr, Randall Q
2011-12-02
The development of new microporous materials for adsorption separation processes is a rapidly growing field because of potential applications such as carbon capture and sequestration (CCS) and purification of clean-burning natural gas. In particular, new metal-organic frameworks (MOFs) and other porous coordination polymers are being generated at a rapid and growing pace. Herein, we address the question of how this large number of materials can be quickly evaluated for their practical application in carbon dioxide separation processes. Five adsorbent evaluation criteria from the chemical engineering literature are described and used to assess over 40 MOFs for their potential in CO(2) separation processes for natural gas purification, landfill gas separation, and capture of CO(2) from power-plant flue gas. Comparisons with other materials such as zeolites are made, and the relationships between MOF properties and CO(2) separation potential are investigated from the large data set. In addition, strategies for tailoring and designing MOFs to enhance CO(2) adsorption are briefly reviewed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
2007-11-02
blowing agent at 680°C. After stirring, the molten material is cured to expand and fill up the mold for about 15 minutes. Then, the foamed molten...closed cell cellular solids. A "perfect" model is first discussed and shown to predict the behavior of PVC foams well. However, this model over...variations (Section VI), and non-uniform cell shapes (Section VII). Fig. 1. Micro graphs of Divinycell [7] HI30 expanded PVC (left) and Alporas [8
Directory of Open Access Journals (Sweden)
Goś Piotr
2016-12-01
Full Text Available This article is part of a series devoted to discussing strategies for the synthesis of ion-imprinted polymers and molecularly imprinted polymers, their chemical structure and great potential, which may be used in porous material design, analytical chemistry, environmental protection and other areas of science. The presented work constitutes a basis for a better understanding of what porous polymers are, how we can synthesise them and how to foresee their properties, which can be later used in studies of environmental pollution and analytical chemistry.
Gryshkov, Oleksandr; Klyui, Nickolai I; Temchenko, Volodymyr P; Kyselov, Vitalii S; Chatterjee, Anamika; Belyaev, Alexander E; Lauterboeck, Lothar; Iarmolenko, Dmytro; Glasmacher, Birgit
2016-11-01
Porous and cytocompatible silicon carbide (SiC) ceramics derived from wood precursors and coated with bioactive hydroxyapatite (HA) and HA-zirconium dioxide (HA/ZrO2) composite are materials with promising application in engineering of bone implants due to their excellent mechanical and structural properties. Biomorphic SiC ceramics have been synthesized from wood (Hornbeam, Sapele, Tilia and Pear) using a forced impregnation method. The SiC ceramics have been coated with bioactive HA and HA/ZrO2 using effective gas detonation deposition approach (GDD). The surface morphology and cytotoxicity of SiC ceramics as well as phase composition and crystallinity of deposited coatings were analyzed. It has been shown that the porosity and pore size of SiC ceramics depend on initial wood source. The XRD and FTIR studies revealed the preservation of crystal structure and phase composition of in the HA coating, while addition of ZrO2 to the initial HA powder resulted in significant decomposition of the final HA/ZrO2 coating and formation of other calcium phosphate phases. In turn, NIH 3T3 cells cultured in medium exposed to coated and uncoated SiC ceramics showed high re-cultivation efficiency as well as metabolic activity. The recultivation efficiency of cells was the highest for HA-coated ceramics, whereas HA/ZrO2 coating improved the recultivation efficiency of cells as compared to uncoated SiC ceramics. The GDD method allowed generating homogeneous HA coatings with no change in calcium to phosphorus ratio. In summary, porous and cytocompatible bio-SiC ceramics with bioactive coatings show a great promise in construction of light, robust, inexpensive and patient-specific bone implants for clinical application.
Jiao, Lian-Sheng; Liu, Jin-Yu; Li, Hong-Yan; Wu, Tong-Shun; Li, Fenghua; Wang, Hao-Yu; Niu, Li
2016-05-01
We report a new method for synthesizing reduced graphene oxide (rGO)-porous silicon composite for lithium-ion battery anodes. Rice husks were used as a as a raw material source for the synthesis of porous Si through magnesiothermic reduction process. The as-obtained composite exhibits good rate and cycling performance taking advantage of the porous structure of silicon inheriting from rice husks and the outstanding characteristic of graphene. A considerably high delithiation capacity of 907 mA h g-1 can be retained even at a rate of 16 A g-1. A discharge capacity of 830 mA h g-1 at a current density of 1 A g-1 was delivered after 200 cycles. This may contribute to the further advancement of Si-based composite anode design.
Directory of Open Access Journals (Sweden)
Ayala-Landeros J.G.
2016-01-01
Full Text Available Porous material was processed by the mixing, molding and pressing the ceramic material, afterward burnout and sintering; through the forming porous, using corn flour at different concentration (10, 15 and 20 wt.% as a pore forming agent; in order to determinate the influence of porous on the mechanical, morphological and structural properties. The effect of the volume fraction of corn flour in the mullite matrix, at various sintering temperature from 1100, 1200, 1300 and 1500°C were tested by Diffraction X ray, showing changes in crystalline phases of mullite (3Al2O3-2SiO2, as result of sintered temperatures. Presence of talcum powder in formula, also cause the formation of the cordierite and cristobalite crystalline phases, giving stability and adhesion to the structure of ceramic material. When sintering at temperatures between 1300 to 1500°C, and it was used the concentration of corn flour 15-20 wt.% as forming agent porous, it was found the better mechanical properties. The scanning electron microscopy analysis shows the presence of open porosity and anisotropy.
Han, Quan Feng; Wang, Ze Wu; Tang, Chak Yin; Chen, Ling; Tsui, Chi Pong; Law, Wing Cheung
2017-07-01
Poly-D-L-lactide/nano-hydroxyapatite (PDLLA/nano-HA) can be used as the biological scaffold material in bone tissue engineering as it can be readily made into a porous composite material with excellent performance. However, constitutive modeling for the mechanical response of porous PDLLA/nano-HA under various stress conditions has been very limited so far. In this work, four types of fundamental compressible hyper-elastic constitutive models were introduced for constitutive modeling and investigation of mechanical behaviors of porous PDLLA/nano-HA. Moreover, the unitary expressions of Cauchy stress tensor have been derived for the PDLLA/nano-HA under uniaxial compression (or stretch), biaxial compression (or stretch), pure shear and simple shear load by using the theory of continuum mechanics. The theoretical results determined from the approach based on the Ogden compressible hyper-elastic constitutive model were in good agreement with the experimental data from the uniaxial compression tests. Furthermore, this approach can also be used to predict the mechanical behaviors of the porous PDLLA/nano-HA material under the biaxial compression (or stretch), pure shear and simple shear. Copyright © 2017 Elsevier Ltd. All rights reserved.
Lísal, Martin; Brennan, John K.; Smith, William R.; Siperstein, Flor R.
2004-09-01
We present a simulation tool to study fluid mixtures that are simultaneously chemically reacting and adsorbing in a porous material. The method is a combination of the reaction ensemble Monte Carlo method and the dual control volume grand canonical molecular dynamics technique. The method, termed the dual control cell reaction ensemble molecular dynamics method, allows for the calculation of both equilibrium and nonequilibrium transport properties in porous materials such as diffusion coefficients, permeability, and mass flux. Control cells, which are in direct physical contact with the porous solid, are used to maintain the desired reaction and flow conditions for the system. The simulation setup closely mimics an actual experimental system in which the thermodynamic and flow parameters are precisely controlled. We present an application of the method to the dry reforming of methane reaction within a nanoscale reactor model in the presence of a semipermeable membrane that was modeled as a porous material similar to silicalite. We studied the effects of the membrane structure and porosity on the reaction species permeability by considering three different membrane models. We also studied the effects of an imposed pressure gradient across the membrane on the mass flux of the reaction species. Conversion of syngas (H2/CO) increased significantly in all the nanoscale membrane reactor models considered. A brief discussion of further potential applications is also presented.
Directory of Open Access Journals (Sweden)
S. A. Reffas
2013-06-01
Full Text Available The use of polymeric materials in engineering applications is growing more and more all over the world. This issue requests new methodologies of analysis in order to assess the material’s capability to withstand complex loads. The use of polyacetal in engineering applications has increased rapidly in the last decade. In order to evaluate the behavior, the damage and coalescence of this type of polymer, a numerical method based on damage which occurs following several stages (nucleation of cavities, their growth and coalescence in more advanced stages of deformation is proposed in this work. A particular attention is given on the stress-strain and the volumetric strain evolution under different triaxiality and for three initial void shapes. Its application to polyacetal allows approving this approach for technical polymers. Finally, this method allow us to compare the obtained results of basic calculations at different triaxiality and to discuss their possible influence on the initial size and the geometrical shape of the porosity on the material failure.
L.A. Dobrzański; M. Pawlyta; A. Hudecki
2011-01-01
Purpose: The purpose of the paper is to analyse theoretically the possibilities of the development of a new generation of the high-innovative advanced porous and composite nanostructural functional materials with nanofibers and to study into the material science grounds of synthesis and/or production and formulation of such materials’ structure and properties and to characterise and model their structure and properties depending on the compositional, phase and chemical composition and the app...
Metal-organic framework templated synthesis of porous inorganic materials as novel sorbents
Energy Technology Data Exchange (ETDEWEB)
Taylor-Pashow, Kathryn M. L.; Lin, Wenbin; Abney, Carter W.
2017-03-21
A novel metal-organic framework (MOF) templated process for the synthesis of highly porous inorganic sorbents for removing radionuclides, actinides, and heavy metals is disclosed. The highly porous nature of the MOFs leads to highly porous inorganic sorbents (such as oxides, phosphates, sulfides, etc) with accessible surface binding sites that are suitable for removing radionuclides from high level nuclear wastes, extracting uranium from acid mine drainage and seawater, and sequestering heavy metals from waste streams. In some cases, MOFs can be directly used for removing these metal ions as MOFs are converted to highly porous inorganic sorbents in situ.
Metal-organic framework templated synthesis of porous inorganic materials as novel sorbents
Taylor-Pashow, Kathryn M. L.; Lin, Wenbin; Abney, Carter W.
2017-03-21
A novel metal-organic framework (MOF) templated process for the synthesis of highly porous inorganic sorbents for removing radionuclides, actinides, and heavy metals is disclosed. The highly porous nature of the MOFs leads to highly porous inorganic sorbents (such as oxides, phosphates, sulfides, etc) with accessible surface binding sites that are suitable for removing radionuclides from high level nuclear wastes, extracting uranium from acid mine drainage and seawater, and sequestering heavy metals from waste streams. In some cases, MOFs can be directly used for removing these metal ions as MOFs are converted to highly porous inorganic sorbents in situ.
Ruan, Changping; Shen, Mengxia; Ren, Xiaoyan; Ai, Kelong; Lu, Lehui
2016-08-01
The frequent oil spillages and the industrial discharge of organic contaminants have not only created severe environmental and ecological crises, but also cause a risk of fire and explosion. These environmental and safety issues emphasize the urgent need for materials that possess superior sorption capability and less flammability and thus can effectively and safely clean up the floating oils and water-insoluble organic compounds. Here we present the successful hydrophobic modification of the flame retardant melamine sponge with a commercial fluorosilicone, by using a facile one-step solvent-free approach and demonstrate that the resultant superhydrophobic sponge not only exhibits extraordinary absorption efficiency (including high capacity, superior selectivity, good recyclability, and simple recycling routes), but also retains excellent flame retardancy and robust stability. In comparison to conventional methods, which usually utilize massive organic solvents, the present approach does not involve any complicated process or sophisticated equipment nor generates any waste liquids, and thus is a more labor-saving, environment-friendly, energy-efficient and cost-effective strategy for the hydrophobic modification. Taking into account the critical role of hydrophobic porous materials, especially in the field of environmental remediation, the approach presented herein would be highly valuable for environmental remediation and industrial applications.
A theoretical approach of strain localization within thin planar bands in porous ductile materials
Leblond, Jean-Baptiste; Mottet, Gérard
2008-01-01
Propagation of cracks in ductile materials is well known to occur through two possible mechanisms: coalescence of cavities and formation of shear bands ('void sheet mechanism'). The classical Gurson-Tvergaard-Needleman (GTN) homogenized model for such materials incorporates some phenomenological modelling of coalescence, but not of formation of shear bands assisted by the presence of microvoids, and this generates a number of shortcomings. In order to solve these difficulties, this paper presents a unified model of both coalescence and formation of shear bands in porous plastic solids, including the possible couplings between the two. Both phenomena are viewed as expressions of the same basic effect, namely strain localization within thin planar bands, the only difference being the mode of deformation. The model is first developed assuming a periodic distribution of cavities, then critically assessed through comparison with some micromechanical numerical simulations based on the same assumption, and finally extended to the case of a random distribution of voids. To cite this article: J.-B. Leblond, G. Mottet, C. R. Mecanique 336 (2008).
Salinity index determination of porous materials using open-ended probes
Szypłowska, Agnieszka; Kafarski, Marcin; Wilczek, Andrzej; Lewandowski, Arkadiusz; Skierucha, Wojciech
2017-01-01
The relations among soil water content, bulk electrical conductivity and electrical conductivity of soil solution can be described by a number of theoretical and empirical models. The aim of the paper is to examine the performance of open-ended coaxial probes with and without a short antenna in determination of complex dielectric permittivity spectra, moisture and salinity of porous materials using the salinity index approach. Glass beads of 0.26 and 1.24 mm average diameters moistened to various water contents with distilled water and KCl solutions were used to model the soil material. Due to the larger sensitivity zone, only the probe with the antenna enabled determination of bulk electrical conductivity and salinity index of the samples. The relations between bulk electrical conductivity and dielectric permittivity of the samples were highly linear, which was consistent with the salinity index model. The slope of the relation between salinity index and electrical conductivity of moistening solutions closely matched the value for 100 % sand presented in literature.
Henke, Stephan; Trieloff, Mario
2016-01-01
The construction of models for the internal constitution and the temporal evolution of large planetesimals, the parent bodies of chondrites, requires information on the heat conductivity of the complex mixture of minerals and iron metal found in chondrites. It is attempted to evaluate the heat conductivity of a multi-component mineral mixture and granular medium from the heat conductivities of its mixture components. Random mixtures of solids with chondritic composition and packings of spheres are numerically generated. The heat conduction equation is solved in high spatial resolution for a test cube filled with such matter. From the heat flux through the cube the heat conductivity of the mixture is derived. The model results for porous material are consistent with data for compacted sandstone, but are at odds with measurements for H and L chondrites. The discrepancy is traced back to shock modification of the currently available meteoritic material by impacts on the parent body over the last 4.5 Ga. This cau...
Optical second-harmonic generation measurements of porous low-k dielectric materials
Atkin, Joanna; Shaw, Thomas; Laibowitz, Robert; Heinz, Tony
2009-03-01
Low-k dielectric materials based on porous carbon-doped oxides, with relative dielectric constants as low as 2.1, are widely used as thin insulating films in the microelectronics industry. Knowledge of these materials' basic electronic properties, such as energy gaps, barrier heights, and trap states, is essential for modeling their electrical leakage and stability characteristics. We use femtosecond laser pulses to probe the dynamics of charge-carrier transfer processes across Si/LKD interfacial barriers by optical second harmonic generation (SHG). Larger electric fields from multiphoton injection can be developed in Si/LKD systems compared to Si/SiO2, indicating a significantly higher density of traps in the LKD. This is consistent with previously reported measurements of trap density by photoinjection techniques^*. We will also discuss results on the dynamics of discharging and on the dependence of charging phenomena on layer thickness. ^*J. M. Atkin, D. Song, T. M. Shaw, E. Cartier, R. B. Laibowitz, and T. F. Heinz, J. Appl. Phys. 103, 094104 (2008).
Institute of Scientific and Technical Information of China (English)
Yunlong Yang; Kuiwen Shen; Ying Liu; Yongtao Tan; Xiaoning Zhao; Jiayu Wu; Xiaoqin Niu; Fen Ran
2017-01-01
Hybrid materials of vanadium nitride and porous carbon nanoparticles (VN/PCNPs) were fabricated by a facile pyrolysis process of vanadium pentoxide (V2O5) xerogel and melamine at relatively low temperature of 800 ?C for supercapacitor application. The effects of the feed ratio of V2O5 to melamine (r), and nitrogen flow rate on the microstructure and electrochemical performance were also investigated. It was found that the size of the as-synthesized nanoparticles is about 20 nm. Both r value and N2 flow rate have enormous impacts on morphology and microstructure of the nanoparticle, which correspondingly determined the electrochemical performance of the material. The VN/C hybrid nanoparticles exhibited high capacitive properties, and a maximum specific capacitance of 255.0 F g-1 was achieved at a current density of 1.0 A g-1 in 2 M KOH aqueous electrolyte and the potential range from 0 to -1.15 V. In addition, symmetrical supercapacitor fabricated with the as-synthesized VN/PCNPs presents a high specific capacitance of 43.5 F g-1 at 0.5 A g-1 based on the entire cell, and an energy density of 8.0 Wh kg-1 when the power density was 575 W kg-1. Even when the power density increased to 2831.5 W kg-1, the energy density still remained 6.1 Wh kg-1.
Measurement of the resistivity of porous materials with an alternating air-flow method.
Dragonetti, Raffaele; Ianniello, Carmine; Romano, Rosario A
2011-02-01
Air-flow resistivity is a main parameter governing the acoustic behavior of porous materials for sound absorption. The international standard ISO 9053 specifies two different methods to measure the air-flow resistivity, namely a steady-state air-flow method and an alternating air-flow method. The latter is realized by the measurement of the sound pressure at 2 Hz in a small rigid volume closed partially by the test sample. This cavity is excited with a known volume-velocity sound source implemented often with a motor-driven piston oscillating with prescribed area and displacement magnitude. Measurements at 2 Hz require special instrumentation and care. The authors suggest an alternating air-flow method based on the ratio of sound pressures measured at frequencies higher than 2 Hz inside two cavities coupled through a conventional loudspeaker. The basic method showed that the imaginary part of the sound pressure ratio is useful for the evaluation of the air-flow resistance. Criteria are discussed about the choice of a frequency range suitable to perform simplified calculations with respect to the basic method. These criteria depend on the sample thickness, its nonacoustic parameters, and the measurement apparatus as well. The proposed measurement method was tested successfully with various types of acoustic materials.
Ice crystallization in porous building materials: assessing damage using real-time 3D monitoring
Deprez, Maxim; De Kock, Tim; De Schutter, Geert; Cnudde, Veerle
2017-04-01
Frost action is one of the main causes of deterioration of porous building materials in regions at middle to high latitudes. Damage will occur when the internal stresses due to ice formation become larger than the strength of the material. Hence, the sensitivity of the material to frost damage is partly defined by the structure of the solid body. On the other hand, the size, shape and interconnection of pores manages the water distribution in the building material and, therefore, the characteristics of the pore space control potential to form ice crystals (Ruedrich et al., 2011). In order to assess the damage to building materials by ice crystallization, lot of effort was put into identifying the mechanisms behind the stress build up. First of all, volumetric expansion of 9% (Hirschwald, 1908) during the transition of water to ice should be mentioned. Under natural circumstances, however, water saturation degrees within natural rocks or concrete cannot reach a damaging value. Therefore, linear growth pressure (Scherer, 1999), as well as several mechanisms triggered by water redistribution during freezing (Powers and Helmuth, 1953; Everett, 1961) are more likely responsible for damage due to freezing. Nevertheless, these theories are based on indirect observations and models and, thus, direct evidence that reveals the exact damage mechanism under certain conditions is still lacking. To obtain this proof, in-situ information needs to be acquired while a freezing process is performed. X-ray computed tomography has proven to be of great value in material research. Recent advances at the Ghent University Centre for Tomography (UGCT) have already allowed to dynamically 3D image crack growth in natural rock during freeze-thaw cycles (De Kock et al., 2015). A great potential to evaluate the different stress build-up mechanisms can be found in this imaging technique consequently. It is required to cover a range of materials with different petrophysical properties to achieve
De Ryck, L; Lauriks, W; Leclaire, P; Groby, J P; Wirgin, A; Depollier, C
2008-09-01
The present paper deals with the inverse scattering problem involving macroscopically inhomogeneous rigid frame porous media. It consists of the recovery, from acoustic measurements, of the profiles of spatially varying material parameters by means of an optimization approach. The resolution is based on the modeling of acoustic wave propagation in macroscopically inhomogeneous rigid frame porous materials, which was recently derived from the generalized Biot's theory. In practice, the inverse problem is solved by minimizing an objective function defined in the least-square sense by the comparison of the calculated reflection (and transmission) coefficient(s) with the measured or synthetic one(s), affected or not by additive Gaussian noise. From an initial guess, the profiles of the x-dependent material parameters are reconstructed iteratively with the help of a standard conjugate gradient method. The convergence rate of the latter and the accuracy of the reconstructions are improved by the availability of an analytical gradient.
Two-Phase Flow Field Simulation of Horizontal Steam Generators
Directory of Open Access Journals (Sweden)
Ataollah Rabiee
2017-02-01
Full Text Available The analysis of steam generators as an interface between primary and secondary circuits in light water nuclear power plants is crucial in terms of safety and design issues. VVER-1000 nuclear power plants use horizontal steam generators which demand a detailed thermal hydraulics investigation in order to predict their behavior during normal and transient operational conditions. Two phase flow field simulation on adjacent tube bundles is important in obtaining logical numerical results. However, the complexity of the tube bundles, due to geometry and arrangement, makes it complicated. Employment of porous media is suggested to simplify numerical modeling. This study presents the use of porous media to simulate the tube bundles within a general-purpose computational fluid dynamics code. Solved governing equations are generalized phase continuity, momentum, and energy equations. Boundary conditions, as one of the main challenges in this numerical analysis, are optimized. The model has been verified and tuned by simple two-dimensional geometry. It is shown that the obtained vapor volume fraction near the cold and hot collectors predict the experimental results more accurately than in previous studies.
Graphene synthesized on porous silicon for active electrode material of supercapacitors
Su, B. B.; Chen, X. Y.; Halvorsen, E.
2016-11-01
We present graphene synthesized by chemical vapour deposition under atmospheric pressure on both porous nanostructures and flat wafers as electrode scaffolds for supercapacitors. A 3nm thin gold layer was deposited on samples of both porous and flat silicon for exploring the catalytic influence during graphene synthesis. Micro-four-point probe resistivity measurements revealed that the resistivity of porous silicon samples was nearly 53 times smaller than of the flat silicon ones when all the samples were covered by a thin gold layer after the graphene growth. From cyclic voltammetry, the average specific capacitance of porous silicon coated with gold was estimated to 267 μF/cm2 while that without catalyst layer was 145μF/cm2. We demonstrated that porous silicon based on nanorods can play an important role in graphene synthesis and enable silicon as promising electrodes for supercapacitors.
Anti-graffiti nanocomposite materials for surface protection of a very porous stone
Licchelli, Maurizio; Malagodi, Marco; Weththimuni, Maduka; Zanchi, Chiara
2014-09-01
The preservation of stone substrates from defacement induced by graffiti represents a very challenging task, which can be faced by applying suitable protective agents on the surface. Although different anti-graffiti materials have been developed, it is often found that their effectiveness is unsatisfactory, most of all when applied on very porous stones, e.g. Lecce stone. The aim of this work was to study the anti-graffiti behaviour of new nanocomposite materials obtained by dispersing montmorillonite nanoparticles (layered aluminosilicates with a high-aspect ratio) into a fluorinated polymer matrix (a fluorinated polyurethane based on perfluoropolyether blocks). Polymeric structure was modified by inducing a cross-linking process, in order to produce a durable anti-graffiti coating with enhanced barrier properties. Several composites were prepared using a naturally occurring and an organically modified montmorillonite clay (1, 3, and 5 % w/w concentrations). Materials were applied on Lecce stone specimens, and then their treated surfaces were soiled by a black ink permanent marker or by a black acrylic spray paint. Several repeated staining/cleaning cycles were performed in order to evaluate anti-graffiti effectiveness. Colorimetric measurements were selected to assess the anti-graffiti performance. It was found that the presence of 3 % w/w organically modified montmorillonite in the polymer coating is enough to induce a durable anti-graffiti effect when the stone surface is stained by acrylic paint. Less promising results are obtained when staining by permanent marker is considered as all the investigated treatments afford a reasonable protection from ink only for the first staining/cleaning cycle.
Two-Phase Cavitating Flow in Turbomachines
Directory of Open Access Journals (Sweden)
Sandor I. Bernad
2012-11-01
Full Text Available Cavitating flows are notoriously complex because they are highly turbulent and unsteady flows involving two species (liquid/vapor with a large density difference. These features pose a unique challenge to numerical modeling works. The study briefly reviews the methodology curently employed for industrial cavitating flow simulations using the two-phase mixture model. The two-phase mixture model is evaluated and validated using benchmark problem where experimental data are available. A 3D cavitating flow computation is performed for the GAMM Francis runner. The model is able to qualitatively predict the location and extent of the 3D cavity on the blade, but further investigation are needed to quatitatively assess the accuracy for real turbomachinery cavitating flows.
Review of two-phase instabilities
Energy Technology Data Exchange (ETDEWEB)
Kang, Han Ok; Seo, Han Ok; Kang, Hyung Suk; Cho, Bong Hyun; Lee, Doo Jeong
1997-06-01
KAERI is carrying out a development of the design for a new type of integral reactors. The once-through helical steam generator is important design features. The study on designs and operating conditions which prevent flow instability should precede the introduction of one-through steam generator. Experiments are currently scheduled to understand two-phase instability, evaluate the effect of each design parameter on the critical point, and determine proper inlet throttling for the prevention of instability. This report covers general two-phase instability with review of existing studies on this topics. The general classification of two phase flow instability and the characteristics of each type of instability are first described. Special attention is paid to BWR core flow instability and once-through steam generator instability. The reactivity feedback and the effect of system parameters are treated mainly for BWR. With relation to once-through steam generators, the characteristics of convective heating and dryout point oscillation are first investigated and then the existing experimental studies are summarized. Finally chapter summarized the proposed correlations for instability boundary conditions. (author). 231 refs., 5 tabs., 47 figs
Critical thinking: a two-phase framework.
Edwards, Sharon L
2007-09-01
This article provides a comprehensive review of how a two-phase framework can promote and engage nurses in the concepts of critical thinking. Nurse education is required to integrate critical thinking in their teaching strategies, as it is widely recognised as an important part of student nurses becoming analytical qualified practitioners. The two-phase framework can be incorporated in the classroom using enquiry-based scenarios or used to investigate situations that arise from practice, for reflection, analysis, theorising or to explore issues. This paper proposes a two-phase framework for incorporation in the classroom and practice to promote critical thinking. Phase 1 attempts to make it easier for nurses to organise and expound often complex and abstract ideas that arise when using critical thinking, identify more than one solution to the problem by using a variety of cues to facilitate action. Phase 2 encourages nurses to be accountable and responsible, to justify a decision, be creative and innovative in implementing change.
Directory of Open Access Journals (Sweden)
ALI CHIKHI
2016-04-01
Full Text Available This work is focused on the behaviour of a block of cement mortar, subjected to variable external temperature and humidity conditions. The porous building material sample is fitted inside a box, in which a heat exchanger is connected to a thermostatic bath. Three sequences of measurement are considered: (i the response of the sample, when variations of temperature are applied; (ii the air ranging between the exchanger and the non-isolated face of the mortar is continuously humidified, by injecting of sprayed water; (iii the effect of simultaneously variation on temperature and humidity. A mathematical model representative of heat and mass transfer, in multiphasic medium (cement mortar, is developed in order to confront experimental and numerical results. Displacements of moisture and temperature fronts are observed and discussed. This study would enable us to understand the hygro-thermal behaviour of construction walls, to make an adequate design according to the climatic parameters and thus to improve the control of the energy used for heating.
Sericin-carboxymethyl cellulose porous matrices as cellular wound dressing material.
Nayak, Sunita; Kundu, S C
2014-06-01
In this study, porous three-dimensional (3D) hydrogel matrices are fabricated composed of silk cocoon protein sericin of non-mulberry silkworm Antheraea mylitta and carboxymethyl cellulose. The matrices are prepared via freeze-drying technique followed by dual cross-linking with glutaraldehyde and aluminum chloride. The microstructure of the hydrogel matrices is assessed using scanning electron microscopy and biophysical characterization are carried out using Fourier transform infrared spectroscopy and X-ray diffraction. The transforming growth factor β1 release from the cross-linked matrices as a growth factor is evaluated by immunosorbent assay. Live dead assay and 3-[4,5-dimethylthiazolyl-2]-2,5-diphenyl tetrazolium bromide assay show no cytotoxicity of blended matrices toward human keratinocytes. The matrices support the cell attachment and proliferation of human keratinocytes as observed through scanning electron microscope and confocal images. Gelatin zymography demonstrates the low levels of matrix metalloproteinase 2 (MMP-2) and insignificant amount of MMP-9 in the culture media of cell seeded matrices. Low inflammatory response of the matrices is indicated through tumor necrosis factor alpha release assay. The results indicate that the fabricated matrices constitute 3D cell-interactive environment for tissue engineering applications and its potential use as a future cellular biological wound dressing material.
Zhu, Fang; Guo, Jiaming; Zeng, Feng; Fu, Ruowen; Wu, Dingcai; Luan, Tiangang; Tong, Yexiang; Lu, Tongbu; Ouyang, Gangfeng
2010-12-10
Two kinds of porous carbon materials, including carbon aerogels (CAs), wormhole-like mesoporous carbons (WMCs), were synthesized and used as the coatings of solid-phase microextraction (SPME) fibers. By using stainless steel wire as the supporting core, six types of fibers were prepared with sol-gel method, direct coating method and direct coating plus sol-gel method. Headspace SPME experiments indicated that the extraction efficiencies of the CA fibers are better than those of the WMC fibers, although the surface area of WMCs is much higher than that of CAs. The sol-gel-CA fiber (CA-A) exhibited excellent extraction properties for non-polar compounds (BTEX, benzene, toluene, ethylbenzene, o-xylene), while direct-coated CA fiber (CA-B) presented the best performance in extracting polar compounds (phenols). The two CA fibers showed wide linear ranges, low detection limits (0.008-0.047μgL(-1) for BTEX, 0.15-5.7μgL(-1) for phenols) and good repeatabilities (RSDs less than 4.6% for BTEX, and less than 9.5% for phenols) and satisfying reproducibilities between fibers (RSDs less than 5.2% for BTEX, and less than 9.9% for phenols). These fibers were successfully used for the analysis of water samples from the Pearl River, which demonstrated the applicability of the home-made CA fibers.
[Purification of the wastewater of quartz processing by mineral-based porous granulation material].
Wang, En-Wen; Lei, Shao-Min; Zhang, Shi-Chun; Huang, Teng
2015-03-01
A mineral-based porous granulation material (MPGM) was prepared for absorbing the heavy metal ions from quartz processing wastewater. Analytic results of the MPGM were illustrated by the techniques of BET, SEM and FT-IR, which revealed the excellent properties of multi-aperture distribution, large specific surface area, low loss ratio and so on; the N2 adsorption-desorption isotherm was type-III with H4 hysteresis loop; the functional groups were dominated by groups of layer silicate mineral. A batch adsorption study was carried out with varied adsorbent dosage, initial pH and reaction time. The results showed that the residual ion concentrations of Fe, Zn, Mn and As were decreased from 77.760, 3.700, 2.789 and 0.963 mg x L(-1) to 3.421, 0.574, 0.126 and 0.034 mg x L(-1), respectively. MPGM might be re-utilized after desorption by 1.0 mol x L(-1) NaCl for 12 hours, and the ideal adsorption performance was maintained after 5 recyclings. The adsorption equilibrium and kinetics followed Langmuir and typical pseudo-first-order/pseudo-second-order adsorption models. Thermodynamic parameters of ΔG(θ) 0, ΔSθ > 0 showed that the adsorptions were spontaneous and endothermic processes in the temperature range of 15-45 degrees C.
Directory of Open Access Journals (Sweden)
Marwa Akkari
2016-12-01
Full Text Available In this study, ZnO/SiO2-clay heterostructures were successfully synthesized by a facile two-step process applied to two types of clays: montmorillonite layered silicate and sepiolite microfibrous clay mineral. In the first step, intermediate silica–organoclay hybrid heterostructures were prepared following a colloidal route based on the controlled hydrolysis of tetramethoxysilane in the presence of the starting organoclay. Later on, pre-formed ZnO nanoparticles (NP dispersed in 2-propanol were incorporated under ultrasound irradiation to the silica–organoclay hybrid heterostructures dispersed in 2-propanol, and finally, the resulting solids were calcinated to eliminate the organic matter and to produce ZnO nanoparticles (NP homogeneously assembled to the clay–SiO2 framework. In the case of montmorillonite the resulting materials were identified as delaminated clays of ZnO/SiO2-clay composition, whereas for sepiolite, the resulting heterostructure is constituted by the assembling of ZnO NP to the sepiolite–silica substrate only affecting the external surface of the clay. The structural and morphological features of the prepared heterostructures were characterized by diverse physico-chemical techniques (such as XRD, FTIR, TEM, FE-SEM. The efficiency of these new porous ZnO/SiO2-clay heterostructures as potential photocatalysts in the degradation of organic dyes and the removal of pharmaceutical drugs in water solution was tested using methylene blue and ibuprofen compounds, respectively, as model of pollutants.
Mechanical Properties of Ti-6Al-4V Octahedral Porous Material Unit Formed by Selective Laser Melting
Directory of Open Access Journals (Sweden)
Jianfeng Sun
2012-01-01
Full Text Available The Ti-6Al-4V octahedral porous material unit is designed to calculate its load. In this paper, ANSYS is adopted for the load simulation of the unit. And a simplified model of dimensional theoretical calculation is established, by which the analytical equation of the fracture load is obtained and the calculation of the load of Ti-6Al-4V is completed. Moreover, selective laser melting is adopted in processing the Ti-6Al-4V porous material unit. The experimental value of fracture load of this material is obtained through compression experiment. The results show that the simulation curves approximate the variation tendency of the elastic deformation of the compression curves; the curves of theoretical calculation approximate the general variation tendency; and the experimental value of fracture load is very close to the theoretical value. Therefore, the theoretical prediction accuracy of fracture load is high, which lays the foundation for the mechanical properties of the octahedral porous material.
Naveen, A. Nirmalesh; Selladurai, S.
2015-06-01
Monodispersed highly porous spinel nickel cobaltite electrode material was successfully synthesized in a short time using combustion technique. Single phase cubic nature of the spinel nickel cobaltite with average crystallite size of 24 nm was determined from X-ray diffraction study. Functional groups present in the compound were determined from FTIR study and it further confirms the spinel formation. FESEM images reveal the porous nature of the prepared material and uniform size distribution of the particles. Electrochemical evaluation was performed using Cyclic Voltammetry (CV) technique, Chronopotentiometry (CP) and Electrochemical Impedance Spectroscopy (EIS). Results reveal the typical pseudocapacitive behaviour of the material. Maximum capacitance of 754 F/g was calculated at the scan rate of 5 mV/s, high capacitance was due to the unique porous morphology of the electrode. Nyquist plot depicts the low resistance and good electrical conductivity of nickel cobaltite. It has been found that nickel cobaltite prepared by this typical method will be a potential electrode material for supercapcitor application.
Institute of Scientific and Technical Information of China (English)
P.A.Nikrityuk; K.Eckert; R.Grundmann; B.Willers; S.Eckert
2003-01-01
The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical model for the directional solidification of a binary alloy in a magnetic field is presented. The model includes mass,momentum, energy and species mass conservation equations written in compressible form and additional relationships describing the temperature-solute coupling. The geometry under study is a cylindrical mold with adiabatic walls and cooled bottom. The macroscale transport in the solidification of alloys is governed by the progress of the two-phase mushy zone, which is treated by means of a porous medium approach. The volume fraction of liquid and solid phases, respectively, is calculated from a 2D approximation of the phase diagram. The results of calculation are compared with experimental data.
Nikrityuk, P. A.; Eckert, K.; Grundmann, R.; Willers, B.; Eckert, S.
2003-11-01
The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical model for the directional solidification of a binary alloy in a magnetic field is presented. The model includes mass, momentum, energy and species mass conservation equations written in compressible form and additional relationships describing the temperature-solute coupling. The geometry under study is a cylindrical mold with adiabatic walls and cooled bottom. The macroscale transport in the solidification of alloys is governed by the progress of the two-phase mushy zone, which is treated by means of a porous medium approach. The volume fraction of liquid and solid phases, respectively, is calculated from a 2D approximation of the phase diagram. The results of calculation are compared with experimental data.
Chen, Weifeng; Ni, Jinzhi
2017-05-01
The surface heterogeneous atoms of carbonaceous materials (CMs) play an important role in adsorption of organic pollutants. However, little is known about the surface heterogeneous atoms of CMs might generate different effect on adsorption of hydrophobic organic compounds by porous carbonaceous materials - activated carbons (ACs) and non-porous carbonaceous materials (NPCMs). In this study, we observed that the surface oxygen and nitrogen atoms could decrease the adsorption affinity of both ACs and NPCMs for 1,1,2,2-tetrachloroethane (TeCA), but the degree of decreasing effects were very different. The increasing content of surface oxygen and nitrogen ([O + N]) caused a sharper decrease in adsorption affinity of ACs (slope of lg (kd/SA) vs [O + N]: -0.098∼-0.16) than that of NPCMs (slope of lg (kd/SA) vs [O + N]: -0.025∼-0.059) for TeCA. It was due to the water cluster formed by the surface hydrophilic atoms that could block the micropores and generate massive invalid adsorption sites in the micropores of ACs, while the water cluster only occupied the surface adsorption sites of NPCMs. Furthermore, with the increasing concentration of dissolved TeCA, the effect of surface area on adsorption affinity of NPCMs for TeCA kept constant while the effect of [O + N] decreased due to the competitive adsorption between water molecule and TeCA on the surface of NPCMs, meanwhile, both the effects of micropore volume and [O + N] on adsorption affinity of ACs for TeCA were decreased due to the mechanism of micropore volume filling. These findings are valuable for providing a deep insight into the adsorption mechanisms of CMs for TeCA.
Naveen, A. Nirmalesh; Selladurai, S.
2014-04-01
High performing porous nickel cobaltite (NiCo2O4) nanomaterial is prepared using novel cost effective auto combustion technique. Physical characterization reveals the formation of nickel rich spinel cobaltitie with average crystallite size of 17 nm. Electrochemical evaluation of the sample is carried using cyclic voltammetry (CV), chronopotentiometry (CP) and AC impedance techniques. The Pseudocapacitive nature of the material is observed from CV and CP studies exhibiting a high specific capacitance of 772 Fg-1 at a current density of 1 Ag-1. The low resistive behavior of the material is seen from the impedance spectra, projecting nickel cobaltite as promising material for supercapcitor applications.
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, Patrick S.
2013-02-27
The energy costs associated with the separation and purification of industrial commodities, such as gases, fine chemicals and fresh water, currently represent around 15 per cent of global energy production, and the demand for such commodities is projected to triple by 2050 (ref. 1). The challenge of developing effective separation and purification technologies that have much smaller energy footprints is greater for carbon dioxide (CO2) than for other gases; in addition to its involvement in climate change, CO 2 is an impurity in natural gas, biogas (natural gas produced from biomass), syngas (CO/H 2, the main source of hydrogen in refineries) and many other gas streams. In the context of porous crystalline materials that can exploit both equilibrium and kinetic selectivity, size selectivity and targeted molecular recognition are attractive characteristics for CO 2 separation and capture, as exemplified by zeolites 5A and 13X (ref. 2), as well as metal-organic materials (MOMs). Here we report that a crystal engineering or reticular chemistry strategy that controls pore functionality and size in a series of MOMs with coordinately saturated metal centres and periodically arrayed hexafluorosilicate (SiF 6 2-) anions enables a \\'sweet spot\\' of kinetics and thermodynamics that offers high volumetric uptake at low CO2 partial pressure (less than 0.15 bar). Most importantly, such MOMs offer an unprecedented CO 2 sorption selectivity over N2, H 2 and CH 4, even in the presence of moisture. These MOMs are therefore relevant to CO2 separation in the context of post-combustion (flue gas, CO2/N2), pre-combustion (shifted synthesis gas stream, CO 2/H 2) and natural gas upgrading (natural gas clean-up, CO2/CH 4). © 2013 Macmillan Publishers Limited. All rights reserved.
Porous LiFePO4/C microspheres as high-power cathode materials for lithium ion batteries.
Sun, Bing; Wang, Ying; Wang, Bei; Kim, Hyun-Soo; Kim, Woo-Seong; Wang, Guoxiu
2013-05-01
Porous LiFePO4/C microspheres were synthesized by a novel hydrothermal reaction combined with high-temperature calcinations. The morphology of the prepared material was investigated by field-emission scanning electron microscopy. Porous microspheres with diameters around 1-3 microm were obtained, which consisting of primary LiFePO4 nanoparticles. The electrochemical performances of the as-prepared LiFePO4 microspheres were evaluated by cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge cycling. The carbon coated LiFePO4 microspheres showed lower polarization, higher rate capability, and better cycling stability than that of pristine LiFePO4 microspheres, indicating the potential application as the cathode material for high-power lithium ion batteries.
Henning, Paul E; Rigo, M Veronica; Geissinger, Peter
2012-01-01
A highly porous optical-fiber cladding was developed for evanescent-wave fiber sensors, which contains sensor molecules, maintains guiding conditions in the optical fiber, and is suitable for sensing in aqueous environments. To make the cladding material (a poly(ethylene) glycol diacrylate (PEGDA) polymer) highly porous, a microsphere templating strategy was employed. The resulting pore network increases transport of the target analyte to the sensor molecules located in the cladding, which improves the sensor response time. This was demonstrated using fluorescein-based pH sensor molecules, which were covalently attached to the cladding material. Scanning electron microscopy was used to examine the structure of the templated polymer and the large network of interconnected pores. Fluorescence measurements showed a tenfold improvement in the response time for the templated polymer and a reliable pH response over a pH range of five to nine with an estimated accuracy of 0.08 pH units.
多孔钛的研究进展%Progress in Research and Development of Porous Titanium Materials
Institute of Scientific and Technical Information of China (English)
汤慧萍; 王建
2014-01-01
Porous titanium has evolved into an important class of metallic materials and is the choice of material for many industrial applications,and the R&D activities on porous titanium have shown a strong uptrend in recent years.This paper begins by providing a brief review of the history of porous titanium and then discusses the preparation processes and char-acteristics of porous titanium materials.The permeability,mechanical property and corrosion behavior of porous titanium are reviewed subsequently,followed by selected examples of their commercial applications.The properties of porous titani-um are mainly determined by the pore structure.Using different techniques,porous titanium with uniform,bimodal,gra-dient,honeycomb or closed pore structures can be produced.In addition,similar to the fabrication of dense titanium mate-rials,the interstitial impurities (O,N and C)in porous titanium should be strictly controlled for both desired mechanical properties and corrosion resistance.Additive manufacturing or 3D metal printing provides a powerful platform for the design and fabrication of novel porous titanium structures compared to conventional powder metallurgy.Future developments of porous titanium will continue to be driven by applications but the new design freedom offered by additive manufacturing is expected to play an increasingly important role.%作为结构功能一体化材料，多孔钛在众多工业领域具有广泛的应用前景，已成为近年来十分活跃的研究方向。简要回顾了多孔钛的研究历史，重点介绍了多孔钛的制备方法与孔结构，并对多孔钛的渗透性能、力学性能和耐腐蚀性能以及主要的商业应用进行了介绍。众多研究和应用表明，多孔钛的性能与功能强烈依赖于孔结构，不同方法制备多孔钛的孔结构可以归纳为均一孔结构、双峰孔结构、梯度孔结构、蜂窝结构和闭孔结构5种类型。除孔结构外，与致密钛合金一样，多
Energy Technology Data Exchange (ETDEWEB)
Mesalhy, O.; Lafdi, K.; Elgafy, A.; Bowman, K. [Dayton University Research Inst., OH (United States)
2005-04-01
In this paper, the melting process inside an irregular geometry filled with high thermal conductivity porous matrix saturated with phase change material PCM is investigated numerically. The numerical model is resting on solving the volume averaged conservation equations for mass, momentum and energy with phase change (melting) in the porous medium. The convection motion of the liquid phase inside the porous matrix is solved considering the Darcy, Brinkman and Forchiemer effects. A local thermal non-equilibrium assumption is considered due to the large difference in thermal properties between the solid matrix and PCM by applying a two energy equation model. The numerical code shows good agreement for pure PCM melting with another published numerical work. Through this study it is found that the presence of the porous matrix has a great effect on the heat transfer and melting rate of the PCM energy storage. Decreasing the porosity of the matrix increases the melting rate, but it also damps the convection motion. It is also found that the best technique to enhance the response of the PCM storage is to use a solid matrix with high porosity and high thermal conductivity. (author)
Frost resistance of building materials
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
In this thesis it is shown that the critical degree of saturation is suitable as parameter for the frost resistance of porous building materials. A numerical model for prediction of critical degrees of saturation based on fracture mechanics and phase geometry of two-phase materials, e.g. porous...... materials, has been developed.The importance of the pore structure on the development of stresses in the material during freezing is emphasized. To verify the model, experimental investigations are made on various concretes without air-entrainment and brick tiles with different porosities...
Frost resistance of building materials
DEFF Research Database (Denmark)
Hansen, Ernst Jan De Place
In this thesis it is shown that the critical degree of saturation is suitable as parameter for the frost resistance of porous building materials. A numerical model for prediction of critical degrees of saturation based on fracture mechanics and phase geometry of two-phase materials, e.g. porous...... materials, has been developed.The importance of the pore structure on the development of stresses in the material during freezing is emphasized. To verify the model, experimental investigations are made on various concretes without air-entrainment and brick tiles with different porosities...
Institute of Scientific and Technical Information of China (English)
孟翠翠; 赵晓鹏; 陈姗
2012-01-01
Miniemulsion polymerization was used to produce encapsulation of two-phase electronic ink nanocapsules-carhon hlack/TiO2 nanoparticles as dispersant phase and the mixture of tetrachloroethylene （TEC） and SPAN-80 as dispersant agent. In this experiment, styrene （SM）-methyl methacrylate （MMA） was used as re- action monomers, hexadecane （HD） as hydrophobe, azobisisobutyronitrile （AIBN） as initiator, polyvinyl alco- hol （PVA） as surfactant and ethanol as solvent. In this article, we do a lot of research on nanocapsules that en- capsulate different chemicals such as organic colloidal of TiO2, carbon black nanoparticles, TiO2 nanoparticles and the pure polymer nanoparticles and discuss the effects of PVA content, ethanol and different surface modification on nano-encapsulated particles on particle size and particle size distribution of carbon black/TiO2 nanoparticles.%摘要：利用细乳液法制备包含炭黑纳米颗粒／TiO2纳米颗粒和分散剂[四氯乙烯（TEC）和SPAN-80的混合液]的双相核材料的电子墨水纳米胶囊。以苯乙烯（SM）-甲基丙烯酸甲酯（MMA）为反应单体，十六烷（HD）为疏水剂，偶氮二异丁腈（AIBN）为引发剂，聚乙烯醇（PVA）为表面活性剂，乙醇为溶剂。把分别包含TiO2有机胶体、炭黑纳米颗粒、TiO2纳米颗粒聚合物纳胶囊以及什么都不包含的纯聚合物纳米胶囊进行了对照。讨论了PVA含量对纳米胶囊粒径的影响，乙醇对纳米胶囊粒径分布的影响，以及不同的表面修饰物对包含碳黑纳米颗粒／TiO2纳米颗粒纳囊的影响。
Simon, Lin; Gidley, D W; Wetzel, J T; Monnig, K A; Ryan, E T; Simon, Jang; Douglas, Yu; Liang, M S; En, W G; Jones, E C; Sturm, J C; Chan, M J; Tiwari, S C; Hirose, M
2002-01-01
Positron Annihilation Lifetime Spectroscopy (PALS) is a useful tool to pre-screen metal barrier integrity for Si-based porous low-k dielectrics. Pore size of low-k, thickness of metal barrier Ta, positronium (Ps) leakage from PALS, trench sidewall morphology, electrical test from one level metal (1LM) pattern wafer and Cu diffusion analysis were all correlated. Macro-porous low-k (pore size >=200 AA) and large scale meso-porous low-k (>50~200 AA) encounter both Ps leakage and Cu diffusion into low-k dielectric in the 0.25 mu mL/0.3 mu mS structures when using SEMATECH in-house PVD Ta 250 AA as barrier layer. For small scale meso-porous (>20~50 AA) and micro- porous (<=20 AA) low-k, no Ps leakage and no Cu diffusion into low-k were observed even with PVD Ta 50 AA, which is proved also owing to sidewall densification to seal all sidewall pores due to plasma etch and ash. For future technology, smaller pore size of porous Si-based low-k (=<50 AA) will be preferential for dense low-k like trench sidewall to...
Numpilai, Thanapha; Witoon, Thongthai; Chareonpanich, Metta; Limtrakul, Jumras
2017-02-01
The conjugation of dexamethasone (DEX) onto modified-porous silica materials via a pH-responsive hydrazone bond has been reported to be highly efficient method to specifically deliver the DEX to diseased sites. However, the influence of physicochemical properties of porous silica materials has not yet been fully understood. In this paper, the impact of pore sizes, particle sizes and silanol contents on surface functionalization, drug loading and release behavior of porous silica materials conjugated with dexamethasone via pH-responsive hydrazone bond was investigated. The grafting density was found to relate to the number of silanol groups on the surface of porous silica materials. The particle size and macropores of the porous silica materials played an vital role on the drug loading and release behavior. Although the porous silica materials with larger particle sizes possessed a lower grafting density, a larger amount of drug loading could be achieved. Moreover, the porous silica materials with larger particle sizes showed a slower release rate of DEX due to a longer distance for cleaved DEX diffusion out of pores. DEX release rate exhibited pH-dependent, sustained release. At pH 4.5, the amount of DEX release within 10 days could be controlled in the range of 12.74-36.41%, depending on the host material. Meanwhile, less than 1.5% of DEX was released from each of type of the porous silica materials at pH 7.4. The results of silica dissolution suggested that the degradation of silica matrix did not significantly affect the release rate of DEX. In addition, the kinetic modeling studies revealed that the DEX releases followed Korsmeyer-Peppas model with a release exponent (n) ranged from 0.3 to 0.47, indicating a diffusion-controlled release mechanism.
Energy Technology Data Exchange (ETDEWEB)
Chen Ruling, E-mail: chenrl04@mails.tsinghua.edu.cn [Research Center of Nano-science and Nano-technology, Shanghai University, Shanghai 200444 (China); Jiang Ranran; Lei Hong; Liang Min [Research Center of Nano-science and Nano-technology, Shanghai University, Shanghai 200444 (China)
2013-01-01
Highlights: Black-Right-Pointing-Pointer The impact of the porous silica clusters on a silicon substrate was studied by MD. Black-Right-Pointing-Pointer The porous cluster shows high MRR and low surface damage at an optimal pore size. Black-Right-Pointing-Pointer The high MRR is due to the combined effects of plough, adhesion and permeation. Black-Right-Pointing-Pointer The low surface damage is due to the decreasing of the penetration depth. Black-Right-Pointing-Pointer Enlarged contact area is more effective than increased penetration to enhance MRR. - Abstract: Molecular dynamics (MD) simulation is applied in analyzing the material removal mechanism of silicon substrate under the impact of large porous silica cluster with different pore diameters. With the increasing of the pore diameter of the porous cluster, the number of the atoms removed from the impact silicon surface will firstly increase and then decrease until the cluster is adhered to the substrate, which is due to the combinational effects of plough of the cluster, adhesion between the cluster and the substrate, and permeation of the substrate atoms through the pore of the cluster. And adhesion is the most significant one among these three effects. Meanwhile, the damage of the impact substrate will become weaker due to the decreasing of the penetration depth with the increasing of the pore diameter. In addition, it is found that the effect of an enlarged real contact area between the cluster and the substrate is more significant than that of deeper penetration of the cluster in order to enhance the material removal rate (MRR) during the impact process. These findings are instructive in optimizing the process parameters to obtain lower surface roughness and higher material removal rate during the chemical mechanical polishing process.
Cluster-Expanded Solids: A Strategy for Assembling Functional Porous Materials
Energy Technology Data Exchange (ETDEWEB)
Long, Jeffrey R.
2008-10-31
This grant provided (partial) support for the research efforts of three graduate students and two undergraduate students. The intention of the program was to explore the use of molecular precursors in generating functional porous materials with precisely tailored structures and properties. Prior work in our laboratory had demonstrated the feasibility of employing face-capped octahedral clusters of the type [Re{sub 6}Q{sub 8}(CN){sub 6}]{sup 3-/4-} (Q = S, Se, Te) in the expansion of known metal-cyanide frameworks. For example, the use of [Re{sub 6}Se{sub 8}(CN){sub 6}]{sup 4-} as a reactant in place of [Fe(CN){sub 6}]{sup 4-} resulted in formation of Fe{sub 4}[Re{sub 6}Se{sub 8}(CN){sub 6}]{sub 3}·36H{sub 2}O, featuring an expanded form of the porous three-dimensional framework of Prussian blue (Fe{sub 4}[Fe(CN){sub 6}]{sub 3}·14H{sub 2}O). This compound could be dehydrated without loss of integrity, and the increase in void volume significantly enhances its capacity as a molecular sieve, enabling absorption of larger molecules. For this project, we continued with our efforts to devise new routes to microporous coordination solids that function as molecular sieves, sensors, or catalysts. In particular, our focus was on: (i) the synthesis of new molecular precursors of specific utility for such purposes, and (ii) attempts to incorporate these and existing molecular precursors into new coordination solids. Investigations of the terminal ligand substitution chemistry of the carbon-centered, trigonal prismatic cluster [W{sub 6}CCl{sub 18}]{sup 2-} generated the solvated species [W{sub 6}CCl{sub 12}(DMF){sub 6}]{sup 2+} and [W{sub 6}CCl{sub 12}(py){sub 6}]{sup 2+}, as well as the potential framework building units [W{sub 6}C(CN){sub 18}]{sup 3-}, [W6CCl{sub 12}(pyrazine){sub 6}]{sup 2+}, [W6CCl{sub 12}(4-cyanopyridine){sub 6}]{sup 2+}, and [W{sub 6}CCl{sub12}(4,4-bipyridine){sub 6}]{sup 2+}. Efforts to produce microporous magnets capable of performing magnetic
Microgravity Two-Phase Flow Transition
Parang, M.; Chao, D.
1999-01-01
Two-phase flows under microgravity condition find a large number of important applications in fluid handling and storage, and spacecraft thermal management. Specifically, under microgravity condition heat transfer between heat exchanger surfaces and fluids depend critically on the distribution and interaction between different fluid phases which are often qualitatively different from the gravity-based systems. Heat transfer and flow analysis in two-phase flows under these conditions require a clear understanding of the flow pattern transition and development of appropriate dimensionless scales for its modeling and prediction. The physics of this flow is however very complex and remains poorly understood. This has led to various inadequacies in flow and heat transfer modeling and has made prediction of flow transition difficult in engineering design of efficient thermal and flow systems. In the present study the available published data for flow transition under microgravity condition are considered for mapping. The transition from slug to annular flow and from bubbly to slug flow are mapped using dimensionless variable combination developed in a previous study by the authors. The result indicate that the new maps describe the flow transitions reasonably well over the range of the data available. The transition maps are examined and the results are discussed in relation to the presumed balance of forces and flow dynamics. It is suggested that further evaluation of the proposed flow and transition mapping will require a wider range of microgravity data expected to be made available in future studies.
A review on solar cells from Si-single crystals to porous materials and quantum dots.
Badawy, Waheed A
2015-03-01
Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. Permanent researches on cost reduction and improved solar cell efficiency have led to the marketing of solar modules having 12-16% solar conversion efficiency. Application of polycrystalline Si and other forms of Si have reduced the cost but on the expense of the solar conversion efficiency. The second generation solar cells were based on thin film technology. Thin films of amorphous Si, CIS (copper-indium-selenide) and t-Si were employed. Solar conversion efficiencies of about 12% have been achieved with a remarkable cost reduction. The third generation solar cells are based on nano-crystals and nano-porous materials. An advanced photovoltaic cell, originally developed for satellites with solar conversion efficiency of 37.3%, based on concentration of the solar spectrum up to 400 suns was developed. It is based on extremely thin concentration cells. New sensitizer or semiconductor systems are necessary to broaden the photo-response in solar spectrum. Hybrids of solar and conventional devices may provide an interim benefit in seeking economically valuable devices. New quantum dot solar cells based on CdSe-TiO2 architecture have been developed.
Copper-Based Metal-Organic Porous Materials for CO2 Electrocatalytic Reduction to Alcohols.
Albo, Jonathan; Vallejo, Daniel; Beobide, Garikoitz; Castillo, Oscar; Castaño, Pedro; Irabien, Angel
2017-03-22
The electrocatalytic reduction of CO2 has been investigated using four Cu-based metal-organic porous materials supported on gas diffusion electrodes, namely, (1) HKUST-1 metal-organic framework (MOF), [Cu3 (μ6 -C9 H3 O6 )2 ]n ; (2) CuAdeAce MOF, [Cu3 (μ3 -C5 H4 N5 )2 ]n ; (3) CuDTA mesoporous metal-organic aerogel (MOA), [Cu(μ-C2 H2 N2 S2 )]n ; and (4) CuZnDTA MOA, [Cu0.6 Zn0.4 (μ-C2 H2 N2 S2 )]n . The electrodes show relatively high surface areas, accessibilities, and exposure of the Cu catalytic centers as well as favorable electrocatalytic CO2 reduction performance, that is, they have a high efficiency for the production of methanol and ethanol in the liquid phase. The maximum cumulative Faradaic efficiencies for CO2 conversion at HKUST-1-, CuAdeAce-, CuDTA-, and CuZnDTA-based electrodes are 15.9, 1.2, 6, and 9.9 %, respectively, at a current density of 10 mA cm(-2) , an electrolyte-flow/area ratio of 3 mL min cm(-2) , and a gas-flow/area ratio of 20 mL min cm(-2) . We can correlate these observations with the structural features of the electrodes. Furthermore, HKUST-1- and CuZnDTA-based electrodes show stable electrocatalytic performance for 17 and 12 h, respectively. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
A review on solar cells from Si-single crystals to porous materials and quantum dots
Directory of Open Access Journals (Sweden)
Waheed A. Badawy
2015-03-01
Full Text Available Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. Permanent researches on cost reduction and improved solar cell efficiency have led to the marketing of solar modules having 12–16% solar conversion efficiency. Application of polycrystalline Si and other forms of Si have reduced the cost but on the expense of the solar conversion efficiency. The second generation solar cells were based on thin film technology. Thin films of amorphous Si, CIS (copper–indium–selenide and t-Si were employed. Solar conversion efficiencies of about 12% have been achieved with a remarkable cost reduction. The third generation solar cells are based on nano-crystals and nano-porous materials. An advanced photovoltaic cell, originally developed for satellites with solar conversion efficiency of 37.3%, based on concentration of the solar spectrum up to 400 suns was developed. It is based on extremely thin concentration cells. New sensitizer or semiconductor systems are necessary to broaden the photo-response in solar spectrum. Hybrids of solar and conventional devices may provide an interim benefit in seeking economically valuable devices. New quantum dot solar cells based on CdSe–TiO2 architecture have been developed.
Flue-gas and direct-air capture of CO2 by porous metal-organic materials.
Madden, David G; Scott, Hayley S; Kumar, Amrit; Chen, Kai-Jie; Sanii, Rana; Bajpai, Alankriti; Lusi, Matteo; Curtin, Teresa; Perry, John J; Zaworotko, Michael J
2017-01-13
Sequestration of CO2, either from gas mixtures or directly from air (direct air capture), is a technological goal important to large-scale industrial processes such as gas purification and the mitigation of carbon emissions. Previously, we investigated five porous materials, three porous metal-organic materials (MOMs), a benchmark inorganic material, ZEOLITE 13X: and a chemisorbent, TEPA-SBA-15: , for their ability to adsorb CO2 directly from air and from simulated flue-gas. In this contribution, a further 10 physisorbent materials that exhibit strong interactions with CO2 have been evaluated by temperature-programmed desorption for their potential utility in carbon capture applications: four hybrid ultramicroporous materials, SIFSIX-3-CU: , DICRO-3-NI-I: , SIFSIX-2-CU-I: and MOOFOUR-1-NI: ; five microporous MOMs, DMOF-1: , ZIF-8: , MIL-101: , UIO-66: and UIO-66-NH2: ; an ultramicroporous MOM, NI-4-PYC: The performance of these MOMs was found to be negatively impacted by moisture. Overall, we demonstrate that the incorporation of strong electrostatics from inorganic moieties combined with ultramicropores offers improved CO2 capture performance from even moist gas mixtures but not enough to compete with chemisorbents.This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.
Flue-gas and direct-air capture of CO2 by porous metal-organic materials
Madden, David G.; Scott, Hayley S.; Kumar, Amrit; Chen, Kai-Jie; Sanii, Rana; Bajpai, Alankriti; Lusi, Matteo; Curtin, Teresa; Perry, John J.; Zaworotko, Michael J.
2017-01-01
Sequestration of CO2, either from gas mixtures or directly from air (direct air capture), is a technological goal important to large-scale industrial processes such as gas purification and the mitigation of carbon emissions. Previously, we investigated five porous materials, three porous metal-organic materials (MOMs), a benchmark inorganic material, Zeolite 13X and a chemisorbent, TEPA-SBA-15, for their ability to adsorb CO2 directly from air and from simulated flue-gas. In this contribution, a further 10 physisorbent materials that exhibit strong interactions with CO2 have been evaluated by temperature-programmed desorption for their potential utility in carbon capture applications: four hybrid ultramicroporous materials, SIFSIX-3-Cu, DICRO-3-Ni-i, SIFSIX-2-Cu-i and MOOFOUR-1-Ni; five microporous MOMs, DMOF-1, ZIF-8, MIL-101, UiO-66 and UiO-66-NH2; an ultramicroporous MOM, Ni-4-PyC. The performance of these MOMs was found to be negatively impacted by moisture. Overall, we demonstrate that the incorporation of strong electrostatics from inorganic moieties combined with ultramicropores offers improved CO2 capture performance from even moist gas mixtures but not enough to compete with chemisorbents. This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.
Directory of Open Access Journals (Sweden)
L.A. Dobrzański
2011-12-01
Full Text Available Purpose: The purpose of the paper is to analyse theoretically the possibilities of the development of a new generation of the high-innovative advanced porous and composite nanostructural functional materials with nanofibers and to study into the material science grounds of synthesis and/or production and formulation of such materials’ structure and properties and to characterise and model their structure and properties depending on the compositional, phase and chemical composition and the applied synthesis and/or production and/or processing processes, without the attitude towards any direct practical application or use, but with confirming the highly probable future application areas, using the unexpected effects of formulating such materials’ functional properties.Design/methodology/approach: In general, the study is of priority cognitive importance as theoretical considerations and the author’s initial analyses related to technology foresight concerning this group of issues as well as sporadical results of research provided in the literature, usually in its incipient phase, indicating a great need to intensify scientific research, to develop the new groups of materials with quite unexpected predictable effects, resulting from the use of nanofibers for fabricating super advanced composite and porous materials.Findings: The description of the state of the art for the subject of the study has been limited to the issues initially selected with an analysis with the method of weighted scores.Practical implications: The outcoming materials may have direct influence on the development of electronics and photonics, medicine and pharmacy, environmental protection, automotive industry, space industry, machine industry, textile and clothing industry, cosmetic industry, agriculture and food sector.Originality/value: The value of this paper lies in the fact that it proposes a new generation of the high-innovative advanced porous and composite