Propagator with positive cosmological constant in the 3D Euclidean quantum gravity toy model

International Nuclear Information System (INIS)

Bunting, William E; Rovelli, Carlo

2014-01-01

We study the propagator on a single tetrahedron in a three-dimensional toy model of quantum gravity with positive cosmological constant. The cosmological constant is included in the model via q-deformation of the spatial symmetry algebra, that is, we use the Turaev–Viro amplitude. The expected repulsive effect of dark energy is recovered in numerical and analytic calculations of the propagator at large scales comparable to the infrared cutoff. However, due to the simplicity of the model, we do not obtain the exact Newton limit of the propagator. This is a first step toward the similar calculation in the full 3+1 dimensional theory with larger numbers of simplicies. (paper)

Neural network tagging in a toy model

International Nuclear Information System (INIS)

Milek, Marko; Patel, Popat

1999-01-01

The purpose of this study is a comparison of Artificial Neural Network approach to HEP analysis against the traditional methods. A toy model used in this analysis consists of two types of particles defined by four generic properties. A number of 'events' was created according to the model using standard Monte Carlo techniques. Several fully connected, feed forward multi layered Artificial Neural Networks were trained to tag the model events. The performance of each network was compared to the standard analysis mechanisms and significant improvement was observed

TACT glossary: toys.

Science.gov (United States)

Taffoni, F; Von, Hofsten

2010-01-01

Toys denote objects used in playing. From the first examples of toys made of materials available in the environment and manufactured by parents or by children themselves only for recreational purpose, toys have evolved into more sophisticated devices which integrate mechanics, electronics and informatics (mechatronic toys) used in several different application fields. There are two main kinds of mechatronic toys: sensorized toys are passive toys equipped with a set of sensors used to record user/toy interactions; robotic toys are artefacts or computers, usually self-propelled with the help of motors, which collect information from the surrounding environment by sensors, and decode this information into behaviors consistent with them. This entry explores the use of the word "toys" from a technological point of view focussing on mechatronic toys and their applications.

Reaction-diffusion processes in zero transverse dimensions as toy models for high-energy QCD

International Nuclear Information System (INIS)

Armesto, Nestor; Bondarenko, Sergey; Quiroga-Arias, Paloma; Milhano, Jose Guilherme

2008-01-01

We examine numerically different zero-dimensional reaction-diffusion processes as candidate toy models for high-energy QCD evolution. Of the models examined-Reggeon Field Theory, Directed Percolation and Reversible Processes-only the latter shows the behaviour commonly expected, namely an increase of the scattering amplitude with increasing rapidity. Further, we find that increasing recombination terms, quantum loops and the heuristic inclusion of a running of the couplings, generically slow down the evolution.

A toy MCT model for multiple glass transitions: Double swallow tail singularity

Energy Technology Data Exchange (ETDEWEB)

Ryzhov, V.N. [Institute for High Pressure Physics, Russian Academy of Sciences, Troitsk 142190, Moscow region (Russian Federation); Moscow Institute of Physics and Technology, 141700 Moscow (Russian Federation); Tareyeva, E.E. [Institute for High Pressure Physics, Russian Academy of Sciences, Troitsk 142190, Moscow region (Russian Federation)

2014-11-07

We propose a toy model to describe in the frame of Mode Coupling Theory multiple glass transitions. The model is based on the postulated simple form for static structure factor as a sum of two delta-functions. This form makes it possible to solve the MCT equations in almost analytical way. The phase diagram is governed by two swallow tails resulting from two A{sub 4} singularities and includes liquid–glass transition and multiple glasses. The diagram has much in common with those of binary and quasibinary systems. - Highlights: • A simple toy model is proposed for description of glass–glass transitions. • The static structure factor of the model has the form of a sum of delta-functions. • The phase diagram contains A{sub 4} bifurcation singularities and A{sub 3} end points. • The results can be applied for the qualitative description of quasibinary systems.

Simple inhomogeneous cosmological (toy) models

International Nuclear Information System (INIS)

Isidro, Eddy G. Chirinos; Zimdahl, Winfried; Vargas, Cristofher Zuñiga

2016-01-01

Based on the Lemaître-Tolman-Bondi (LTB) metric we consider two flat inhomogeneous big-bang models. We aim at clarifying, as far as possible analytically, basic features of the dynamics of the simplest inhomogeneous models and to point out the potential usefulness of exact inhomogeneous solutions as generalizations of the homogeneous configurations of the cosmological standard model. We discuss explicitly partial successes but also potential pitfalls of these simplest models. Although primarily seen as toy models, the relevant free parameters are fixed by best-fit values using the Joint Light-curve Analysis (JLA)-sample data. On the basis of a likelihood analysis we find that a local hump with an extension of almost 2 Gpc provides a better description of the observations than a local void for which we obtain a best-fit scale of about 30 Mpc. Future redshift-drift measurements are discussed as a promising tool to discriminate between inhomogeneous configurations and the ΛCDM model.

Mean transverse momenta correlations in hadron-hadron collisions in MC toy model with repulsing strings

International Nuclear Information System (INIS)

Altsybeev, Igor

2016-01-01

In the present work, Monte-Carlo toy model with repulsing quark-gluon strings in hadron-hadron collisions is described. String repulsion creates transverse boosts for the string decay products, giving modifications of observables. As an example, long-range correlations between mean transverse momenta of particles in two observation windows are studied in MC toy simulation of the heavy-ion collisions

Stability and replica symmetry in the ising spin glass: a toy model

International Nuclear Information System (INIS)

De Dominicis, C.; Mottishaw, P.

1986-01-01

Searching for possible replica symmetric solutions in an Ising spin glass (in the tree approximation) we investigate a toy model whose bond distribution has two non vanishing cumulants (instead of one only as in a gaussian distribution)

A toy model for gauge-mediation in intersecting brane models

International Nuclear Information System (INIS)

Kumar, Jason

2009-01-01

We discuss the phenomenology of a toy intersecting brane model where supersymmetry is dynamically broken in an open-string hidden sector and gauge-mediated to the visible sector. Scalar masses ∼TeV are easily realizable, and R-symmetry is broken. These ideas are easily generalizable to other intersecting brane models.

The Changing World of Toys and Toy Play

Science.gov (United States)

Elkind, David

2005-01-01

In this article, the author discusses the changing world of toys and toy play. Children learn about themselves and their world from their play with toys. Over the past half century there has been a remarkable transformation of the toy world of children. Toys have changed in quantity, quality, and level of technology. Mass production has made…

Application of a method for comparing one-dimensional and two-dimensional models of a ground-water flow system

International Nuclear Information System (INIS)

Naymik, T.G.

1978-01-01

To evaluate the inability of a one-dimensional ground-water model to interact continuously with surrounding hydraulic head gradients, simulations using one-dimensional and two-dimensional ground-water flow models were compared. This approach used two types of models: flow-conserving one-and-two dimensional models, and one-dimensional and two-dimensional models designed to yield two-dimensional solutions. The hydraulic conductivities of controlling features were varied and model comparison was based on the travel times of marker particles. The solutions within each of the two model types compare reasonably well, but a three-dimensional solution is required to quantify the comparison

A quantal toy model for heavy-ion collisions

International Nuclear Information System (INIS)

Cassing, W.

1987-01-01

A one-dimensional toy model of moving finite boxes is analysed with respect to quantal phenomena associated with heavy-ion dynamics at low and intermediate energies. Special attention is payed to the relation between energy and momentum of the nucleons inside and outside the time-dependent mean field. A Wigner transformation of the one-body density matrix in space and time allows for a unique comparison with classical phase-space dynamics. It is found that high momentum components of the nuclear groundstate wave function approximately become on-shell during the heavy-ion reaction. This leads to the emission of energetic nucleons which do not appear classically. It is furthermore shown, that the low lying eigenstates of the dinuclear system for fixed time are only partly occupied throughout the reaction at intermediate energies. This opens up final phase space for nucleons after producing e.g. a pion or energetic photon. Through the present model does not allow for a reliable calculation of double differential nucleon spectra, pion or photon cross sections, it transparently shows the peculiar features of quantum dynamics in heavy-ion collisions. (orig.)

On two-dimensionalization of three-dimensional turbulence in shell models

DEFF Research Database (Denmark)

Chakraborty, Sagar; Jensen, Mogens Høgh; Sarkar, A.

2010-01-01

Applying a modified version of the Gledzer-Ohkitani-Yamada (GOY) shell model, the signatures of so-called two-dimensionalization effect of three-dimensional incompressible, homogeneous, isotropic fully developed unforced turbulence have been studied and reproduced. Within the framework of shell m......-similar PDFs for longitudinal velocity differences are also presented for the rotating 3D turbulence case....

Integrated Toys

DEFF Research Database (Denmark)

Petersson, Eva

2005-01-01

the theoretical foundations of play and learning. In this presentation, we explore pedagogical potentials of new technologies and traditional toys integrated into a physical and virtual toy (hereinafter called integrated toy) with specific focus on the open-ended toy and non-formal learning. The integrated toy......Toys play a crucial role in supporting children’s learning and creation of meaning in their everyday life. Children also play with toys out of an interest to interact with others e.g. peers and adults. Tendencies of digital technology in toys have led to greater opportunities for manipulation...... and interaction supporting children’s play and learning such that technology is ever-present in the play environments of children. Although electronics have been deployed in tools for play and learning, most of it has facilitated individual learning. Computer games, for instance, most often are designed...

The Study of Two-Dimensional Oscillations Using a Smartphone Acceleration Sensor: Example of Lissajous Curves

Science.gov (United States)

Tuset-Sanchis, Luis; Castro-Palacio, Juan C.; Gómez-Tejedor, José A.; Manjón, Francisco J.; Monsoriu, Juan A.

2015-01-01

A smartphone acceleration sensor is used to study two-dimensional harmonic oscillations. The data recorded by the free android application, Accelerometer Toy, is used to determine the periods of oscillation by graphical analysis. Different patterns of the Lissajous curves resulting from the superposition of harmonic motions are illustrated for…

Spekkens’ toy model in all dimensions and its relationship with stabiliser quantum mechanics

Science.gov (United States)

Catani, Lorenzo; E Browne, Dan

2017-07-01

Spekkens’ toy model is a non-contextual hidden variable model with an epistemic restriction, a constraint on what an observer can know about reality. The aim of the model, developed for continuous and discrete prime degrees of freedom, is to advocate the epistemic view of quantum theory, where quantum states are states of incomplete knowledge about a deeper underlying reality. Many aspects of quantum mechanics and protocols from quantum information can be reproduced in the model. In spite of its significance, a number of aspects of Spekkens’ model remained incomplete. Formal rules for the update of states after measurement had not been written down, and the theory had only been constructed for prime-dimensional and infinite dimensional systems. In this work, we remedy this, by deriving measurement update rules and extending the framework to derive models in all dimensions, both prime and non-prime. Stabiliser quantum mechanics (SQM) is a sub-theory of quantum mechanics with restricted states, transformations and measurements. First derived for the purpose of constructing error correcting codes, it now plays a role in many areas of quantum information theory. Previously, it had been shown that Spekkens’ model was operationally equivalent to SQM in the case of odd prime dimensions. Here, exploiting known results on Wigner functions, we extend this to show that Spekkens’ model is equivalent to SQM in all odd dimensions, prime and non-prime. This equivalence provides new technical tools for the study of technically difficult compound-dimensional SQM.

Spekkens’ toy model in all dimensions and its relationship with stabiliser quantum mechanics

International Nuclear Information System (INIS)

Catani, Lorenzo; Browne, Dan E

2017-01-01

Spekkens’ toy model is a non-contextual hidden variable model with an epistemic restriction, a constraint on what an observer can know about reality. The aim of the model, developed for continuous and discrete prime degrees of freedom, is to advocate the epistemic view of quantum theory, where quantum states are states of incomplete knowledge about a deeper underlying reality. Many aspects of quantum mechanics and protocols from quantum information can be reproduced in the model. In spite of its significance, a number of aspects of Spekkens’ model remained incomplete. Formal rules for the update of states after measurement had not been written down, and the theory had only been constructed for prime-dimensional and infinite dimensional systems. In this work, we remedy this, by deriving measurement update rules and extending the framework to derive models in all dimensions, both prime and non-prime. Stabiliser quantum mechanics (SQM) is a sub-theory of quantum mechanics with restricted states, transformations and measurements. First derived for the purpose of constructing error correcting codes, it now plays a role in many areas of quantum information theory. Previously, it had been shown that Spekkens’ model was operationally equivalent to SQM in the case of odd prime dimensions. Here, exploiting known results on Wigner functions, we extend this to show that Spekkens’ model is equivalent to SQM in all odd dimensions, prime and non-prime. This equivalence provides new technical tools for the study of technically difficult compound-dimensional SQM. (paper)

Toy model for pion production in nucleon-nucleon collisions

International Nuclear Information System (INIS)

Hanhart, C.; Miller, G. A.; Myhrer, F.; Sato, T.; Kolck, U. van

2001-01-01

We develop a toy model for pion production in nucleon-nucleon collisions that reproduces some of the features of the chiral Lagrangian calculations. We calculate the production amplitude and examine some common approximations

Quantum toy model for black-hole backreaction

International Nuclear Information System (INIS)

Maia, Clovis; Schuetzhold, Ralf

2007-01-01

We propose a simple quantum field theoretical toy model for black-hole evaporation and study the backreaction of Hawking radiation onto the classical background. It turns out that the horizon is also ''pushed back'' in this situation (i.e., the interior region shrinks) though this backreaction is not caused by energy conservation but by momentum balance. The effective heat capacity and induced entropy variation can have both signs--depending on the parameters of the model

A Toy Model for QCD: Hadrons, Penta- and Heptaquarks

International Nuclear Information System (INIS)

Nunez, M.; Hess, P.O.; Civitarese, O.; Reboiro, M.

2004-01-01

A toy model for QCD is presented and applied to the hadron spectrum. As a byproduct the structure of penta- and hepta-quarks is obtained. A complete classification of the states is given. One essential feature of the model is the non-conservation of particle number

Colour annealing - a toy model of colour reconnections

Energy Technology Data Exchange (ETDEWEB)

Sandhoff, Marisa; /Wuppertal U.; Skands, Peter; /Fermilab

2005-12-01

We present a simple toy model for colour reconnections at the nonperturbative level. The model resembles an annealing-type algorithm and is applicable to any collider and process type, though we argue for a possible enhancement of the effect in hadron-hadron collisions. We present a simple application and study of the consequences for semileptonic t{bar t} events at the Tevatron.

Colour annealing - a toy model of colour reconnections

International Nuclear Information System (INIS)

Sandhoff, Marisa; Wuppertal U.; Skands, Peter; Fermilab

2005-01-01

We present a simple toy model for colour reconnections at the nonperturbative level. The model resembles an annealing-type algorithm and is applicable to any collider and process type, though we argue for a possible enhancement of the effect in hadron-hadron collisions. We present a simple application and study of the consequences for semileptonic t(bar t) events at the Tevatron

On some classes of two-dimensional local models in discrete two-dimensional monatomic FPU lattice with cubic and quartic potential

International Nuclear Information System (INIS)

Quan, Xu; Qiang, Tian

2009-01-01

This paper discusses the two-dimensional discrete monatomic Fermi–Pasta–Ulam lattice, by using the method of multiple-scale and the quasi-discreteness approach. By taking into account the interaction between the atoms in the lattice and their nearest neighbours, it obtains some classes of two-dimensional local models as follows: two-dimensional bright and dark discrete soliton trains, two-dimensional bright and dark line discrete breathers, and two-dimensional bright and dark discrete breather. (condensed matter: structure, thermal and mechanical properties)

Toy Models of a Nonassociative Quantum Mechanics

International Nuclear Information System (INIS)

Dzhunushaliev, V.

2007-01-01

Toy models of a nonassociative quantum mechanics are presented. The Heisenberg equation of motion is modified using a nonassociative commutator. Possible physical applications of a nonassociative quantum mechanics are considered. The idea is discussed that a nonassociative algebra could be the operator language for the nonperturbative quantum theory. In such approach the nonperturbative quantum theory has observables and un observables quantities.

Incorrectness of conventional one-dimensional parallel thermal resistance circuit model for two-dimensional circular composite pipes

International Nuclear Information System (INIS)

Wong, K.-L.; Hsien, T.-L.; Chen, W.-L.; Yu, S.-J.

2008-01-01

This study is to prove that two-dimensional steady state heat transfer problems of composite circular pipes cannot be appropriately solved by the conventional one-dimensional parallel thermal resistance circuits (PTRC) model because its interface temperatures are not unique. Thus, the PTRC model is definitely different from its conventional recognized analogy, parallel electrical resistance circuits (PERC) model, which has unique node electric voltages. Two typical composite circular pipe examples are solved by CFD software, and the numerical results are compared with those obtained by the PTRC model. This shows that the PTRC model generates large error. Thus, this conventional model, introduced in most heat transfer text books, cannot be applied to two-dimensional composite circular pipes. On the contrary, an alternative one-dimensional separately series thermal resistance circuit (SSTRC) model is proposed and applied to a two-dimensional composite circular pipe with isothermal boundaries, and acceptable results are returned

The inaccuracy of conventional one-dimensional parallel thermal resistance circuit model for two-dimensional composite walls

International Nuclear Information System (INIS)

Wong, K.-L.; Hsien, T.-L.; Hsiao, M.-C.; Chen, W.-L.; Lin, K.-C.

2008-01-01

This investigation is to show that two-dimensional steady state heat transfer problems of composite walls should not be solved by the conventionally one-dimensional parallel thermal resistance circuits (PTRC) model because the interface temperatures are not unique. Thus PTRC model cannot be used like its conventional recognized analogy, parallel electrical resistance circuits (PERC) model which has the unique node electric voltage. Two typical composite wall examples, solved by CFD software, are used to demonstrate the incorrectness. The numerical results are compared with those obtained by PTRC model, and very large differences are observed between their results. This proves that the application of conventional heat transfer PTRC model to two-dimensional composite walls, introduced in most heat transfer text book, is totally incorrect. An alternative one-dimensional separately series thermal resistance circuit (SSTRC) model is proposed and applied to the two-dimensional composite walls with isothermal boundaries. Results with acceptable accuracy can be obtained by the new model

One-dimensional GIS-based model compared with a two-dimensional model in urban floods simulation.

Science.gov (United States)

Lhomme, J; Bouvier, C; Mignot, E; Paquier, A

2006-01-01

A GIS-based one-dimensional flood simulation model is presented and applied to the centre of the city of Nîmes (Gard, France), for mapping flow depths or velocities in the streets network. The geometry of the one-dimensional elements is derived from the Digital Elevation Model (DEM). The flow is routed from one element to the next using the kinematic wave approximation. At the crossroads, the flows in the downstream branches are computed using a conceptual scheme. This scheme was previously designed to fit Y-shaped pipes junctions, and has been modified here to fit X-shaped crossroads. The results were compared with the results of a two-dimensional hydrodynamic model based on the full shallow water equations. The comparison shows that good agreements can be found in the steepest streets of the study zone, but differences may be important in the other streets. Some reasons that can explain the differences between the two models are given and some research possibilities are proposed.

A study of the Boltzmann and Gibbs entropies in the context of a stochastic toy model

Science.gov (United States)

Malgieri, Massimiliano; Onorato, Pasquale; De Ambrosis, Anna

2018-05-01

In this article we reconsider a stochastic toy model of thermal contact, first introduced in Onorato et al (2017 Eur. J. Phys. 38 045102), showing its educational potential for clarifying some current issues in the foundations of thermodynamics. The toy model can be realized in practice using dice and coins, and can be seen as representing thermal coupling of two subsystems with energy bounded from above. The system is used as a playground for studying the different behaviours of the Boltzmann and Gibbs temperatures and entropies in the approach to steady state. The process that models thermal contact between the two subsystems can be proved to be an ergodic, reversible Markov chain; thus the dynamics produces an equilibrium distribution in which the weight of each state is proportional to its multiplicity in terms of microstates. Each one of the two subsystems, taken separately, is formally equivalent to an Ising spin system in the non-interacting limit. The model is intended for educational purposes, and the level of readership of the article is aimed at advanced undergraduates.

Microscopic and probabilistic approach to thermal steady state based on a dice and coin toy model

International Nuclear Information System (INIS)

Onorato, Pasquale; Moggio, Lorenzo; Oss, Stefano; Malgieri, Massimiliano

2017-01-01

In this article we present an educational approach to thermal equilibrium which was tested on a group of 13 undergraduate students at the University of Trento. The approach is based on a stochastic toy model, in which bodies in thermal contact are represented by rows of squares on a cardboard table, which exchange coins placed on the squares based on the roll of two dice. The discussion of several physical principles, such as the exponential approach to equilibrium, the determination of the equilibrium temperature, and the interpretation of the equilibrium state as the most probable macrostate, proceeds through a continual comparison between the outcomes obtained with the toy model and the results of a real experiment on the thermal contact of two masses of water at different temperatures. At the end of the sequence, a re-analysis of the experimental results in view of both the Boltzmann and Clausius definitions of entropy reveals some limits of the toy model, but also allows for a critical discussion of the concepts of temperature and entropy. In order to provide the reader with a feeling of how the sequence was received by students, and how it helped them understand the topics introduced, we discuss some excerpts from their answers to a conceptual item given at the end of the sequence. (paper)

Two-dimensional effects in nonlinear Kronig-Penney models

DEFF Research Database (Denmark)

Gaididei, Yuri Borisovich; Christiansen, Peter Leth; Rasmussen, Kim

1997-01-01

An analysis of two-dimensional (2D) effects in the nonlinear Kronig-Penney model is presented. We establish an effective one-dimensional description of the 2D effects, resulting in a set of pseudodifferential equations. The stationary states of the 2D system and their stability is studied...

Exterior calculus and two-dimensional supersymmetric models

International Nuclear Information System (INIS)

Sciuto, S.

1980-01-01

An important property of the calculus of differential forms on superspace is pointed out, and an economical way to treat the linear problem associated with certain supersymmetric two-dimensional models is discussed. A generalization of the super sine-Gordon model is proposed; its bosonic limit is a new model whose associate linear set has an SU(3) structure. (orig.)

Multi-technique quantitative analysis and socioeconomic considerations of lead, cadmium, and arsenic in children's toys and toy jewelry.

Science.gov (United States)

Hillyer, Margot M; Finch, Lauren E; Cerel, Alisha S; Dattelbaum, Jonathan D; Leopold, Michael C

2014-08-01

A wide spectrum and large number of children's toys and toy jewelry items were purchased from both bargain and retail vendors and analyzed for arsenic, cadmium, and lead metal content using multiple analytical techniques, including flame and furnace atomic absorption spectroscopy as well as X-ray fluorescence spectroscopy. Particularly dangerous for young children, metal concentrations in toys/toy jewelry were assessed for compliance with current Consumer Safety Product Commission (CPSC) regulations (F963-11). A conservative metric involving multiple analytical techniques was used to categorize compliance: one technique confirmation of metal in excess of CPSC limits indicated a "suspect" item while confirmation on two different techniques warranted a non-compliant designation. Sample matrix-based standard addition provided additional confirmation of non-compliant and suspect products. Results suggest that origin of purchase, rather than cost, is a significant factor in the risk assessment of these materials with 57% of toys/toy jewelry items from bargain stores non-compliant or suspect compared to only 15% from retail outlets and 13% if only low cost items from the retail stores are compared. While jewelry was found to be the most problematic product (73% of non-compliant/suspect samples), lead (45%) and arsenic (76%) were the most dominant toxins found in non-compliant/suspect samples. Using the greater Richmond area as a model, the discrepancy between bargain and retail children's products, along with growing numbers of bargain stores in low-income and urban areas, exemplifies an emerging socioeconomic public health issue. Copyright © 2014 Elsevier Ltd. All rights reserved.

Euclidean and Lorentzian Quantum Gravity – Lessons from Two Dimensions

NARCIS (Netherlands)

Ambjørn, J.; Loll, R.; Nielsen, J. L.; Rolf, J.

1998-01-01

No theory of four-dimensional quantum gravity exists as yet. In this situation the two-dimensional theory, which can be analyzed by conventional field-theoretical methods, can serve as a toy model for studying some aspects of quantum gravity. It represents one of the rare settings in a

[Acoustical parameters of toys].

Science.gov (United States)

Harazin, Barbara

2010-01-01

Toys play an important role in the development of the sight and hearing concentration in children. They also support the development of manipulation, gently influence a child and excite its emotional activities. A lot of toys emit various sounds. The aim of the study was to assess sound levels produced by sound-emitting toys used by young children. Acoustical parameters of noise were evaluated for 16 sound-emitting plastic toys in laboratory conditions. The noise level was recorded at four different distances, 10, 20, 25 and 30 cm, from the toy. Measurements of A-weighted sound pressure levels and noise levels in octave band in the frequency range from 31.5 Hz to 16 kHz were performed at each distance. Taking into consideration the highest equivalent A-weighted sound levels produced by tested toys, they can be divided into four groups: below 70 dB (6 toys), from 70 to 74 dB (4 toys), from 75 to 84 dB (3 toys) and from 85 to 94 dB (3 toys). The majority of toys (81%) emitted dominant sound levels in octave band at the frequency range from 2 kHz to 4 kHz. Sound-emitting toys produce the highest acoustic energy at the frequency range of the highest susceptibility of the auditory system. Noise levels produced by some toys can be dangerous to children's hearing.

Topics in Covariant Closed String Field Theory and Two-Dimensional Quantum Gravity

Science.gov (United States)

Saadi, Maha

1991-01-01

The closed string field theory based on the Witten vertex is found to be nonpolynomial in order to reproduce all tree amplitudes correctly. The interactions have a geometrical pattern of overlaps, which can be thought as the edges of a spherical polyhedron with face-perimeters equal to 2pi. At each vertex of the polyhedron there are three faces, thus all elementary interactions are cubic in the sense that at most three strings can coincide at a point. The quantum action is constructed by substracting counterterms which cancel the overcounting of moduli space, and by adding loop vertices in such a way no possible surfaces are missed. A counterterm that gives the correct one-string one-loop amplitude is formulated. The lowest order loop vertices are analyzed in the cases of genus one and two. Also, a one-loop two -string counterterm that restores BRST invariance to the respective scattering amplitude is constructed. An attempt to understand the formulation of two -dimensional pure gravity from the discrete representation of a two-dimensional surface is made. This is considered as a toy model of string theory. A well-defined mathematical model is used. Its continuum limit cannot be naively interpreted as pure gravity because each term of the sum over surfaces is not positive definite. The model, however, could be considered as an analytic continuation of the standard matrix model formulation of gravity. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.).

A toy model for higher spin Dirac operators

International Nuclear Information System (INIS)

Eelbode, D.; Van de Voorde, L.

2010-01-01

This paper deals with the higher spin Dirac operator Q 2,1 acting on functions taking values in an irreducible representation space for so(m) with highest weight (5/2, 3/2, 1/2,..., 1/2). . This operator acts as a toy model for generalizations of the classical Rarita-Schwinger equations in Clifford analysis. Polynomial null solutions for this operator are studied in particular.

The Einstein action for algebras of matrix valued functions - Toy models

International Nuclear Information System (INIS)

Hajac, P.M.

1995-10-01

Two toy models are considered within the framework of noncommutative differential geometry. In the first one, the Einstein action of the Levi-Civita connection is computed for the algebra of matrix valued functions on a torus. It is shown that, assuming some constraints on the metric, this action splits into a classical-like, a quantum-like and a mixed term. In the second model, an analogue of the Palatini method of variation is applied to obtain critical points of the Einstein action functional for M 4 (R). It is pointed out that a solution to the Palatini variational problem is not necessarily a Levi-Civita connection. In this model, no additional assumptions regarding metrics are made. (author). 14 refs

A two-dimensional mathematical model of percutaneous drug absorption

Directory of Open Access Journals (Sweden)

Kubota K

2004-06-01

Full Text Available Abstract Background When a drug is applied on the skin surface, the concentration of the drug accumulated in the skin and the amount of the drug eliminated into the blood vessel depend on the value of a parameter, r. The values of r depend on the amount of diffusion and the normalized skin-capillary clearence. It is defined as the ratio of the steady-state drug concentration at the skin-capillary boundary to that at the skin-surface in one-dimensional models. The present paper studies the effect of the parameter values, when the region of contact of the skin with the drug, is a line segment on the skin surface. Methods Though a simple one-dimensional model is often useful to describe percutaneous drug absorption, it may be better represented by multi-dimensional models. A two-dimensional mathematical model is developed for percutaneous absorption of a drug, which may be used when the diffusion of the drug in the direction parallel to the skin surface must be examined, as well as in the direction into the skin, examined in one-dimensional models. This model consists of a linear second-order parabolic equation with appropriate initial conditions and boundary conditions. These boundary conditions are of Dirichlet type, Neumann type or Robin type. A finite-difference method which maintains second-order accuracy in space along the boundary, is developed to solve the parabolic equation. Extrapolation in time is applied to improve the accuracy in time. Solution of the parabolic equation gives the concentration of the drug in the skin at a given time. Results Simulation of the numerical methods described is carried out with various values of the parameter r. The illustrations are given in the form of figures. Conclusion Based on the values of r, conclusions are drawn about (1 the flow rate of the drug, (2 the flux and the cumulative amount of drug eliminated into the receptor cell, (3 the steady-state value of the flux, (4 the time to reach the steady

Projective limits of state spaces III. Toy-models

Science.gov (United States)

Lanéry, Suzanne; Thiemann, Thomas

2018-01-01

In this series of papers, we investigate the projective framework initiated by Kijowski (1977) and Okołów (2009, 2014, 2013) [1,2], which describes the states of a quantum theory as projective families of density matrices. A short reading guide to the series can be found in Lanéry (2016). A strategy to implement the dynamics in this formalism was presented in our first paper Lanéry and Thiemann (2017) (see also Lanéry, 2016, section 4), which we now test in two simple toy-models. The first one is a very basic linear model, meant as an illustration of the general procedure, and we will only discuss it at the classical level. In the second one, we reformulate the Schrödinger equation, treated as a classical field theory, within this projective framework, and proceed to its (non-relativistic) second quantization. We are then able to reproduce the physical content of the usual Fock quantization.

Geometrical aspects of solvable two dimensional models

International Nuclear Information System (INIS)

Tanaka, K.

1989-01-01

It was noted that there is a connection between the non-linear two-dimensional (2D) models and the scalar curvature r, i.e., when r = -2 the equations of motion of the Liouville and sine-Gordon models were obtained. Further, solutions of various classical nonlinear 2D models can be obtained from the condition that the appropriate curvature two form Ω = 0, which suggests that these models are closely related. This relation is explored further in the classical version by obtaining the equations of motion from the evolution equations, the infinite number of conserved quantities, and the common central charge. The Poisson brackets of the solvable 2D models are specified by the Virasoro algebra. 21 refs

Toys for Preschool Children

Science.gov (United States)

Stephenson, Audrey

1977-01-01

In emphasizing the importance of play and toys in a child's development, this article describes the kinds of toys suitable for preschool children of all ages. Floor toys, building and hammering toys, transport, and imaginative and creative play are some of the topics covered. (JK)

Extended inflation from higher-dimensional theories

International Nuclear Information System (INIS)

Holman, R.; Kolb, E.W.; Vadas, S.L.; Wang, Y.

1991-01-01

We consider the possibility that higher-dimensional theories may, upon reduction to four dimensions, allow extended inflation to occur. We analyze two separate models. One is a very simple toy model consisting of higher-dimensional gravity coupled to a scalar field whose potential allows for a first-order phase transition. The other is a more sophisticated model incorporating the effects of nontrivial field configurations (monopole, Casimir, and fermion bilinear condensate effects) that yield a nontrivial potential for the radius of the internal space. We find that extended inflation does not occur in these models. We also find that the bubble nucleation rate in these theories is time dependent unlike the case in the original version of extended inflation

The Einstein action for algebras of matrix valued functions - Toy models

Energy Technology Data Exchange (ETDEWEB)

Hajac, P M

1995-10-01

Two toy models are considered within the framework of noncommutative differential geometry. In the first one, the Einstein action of the Levi-Civita connection is computed for the algebra of matrix valued functions on a torus. It is shown that, assuming some constraints on the metric, this action splits into a classical-like, a quantum-like and a mixed term. In the second model, an analogue of the Palatini method of variation is applied to obtain critical points of the Einstein action functional for M{sub 4}(R). It is pointed out that a solution to the Palatini variational problem is not necessarily a Levi-Civita connection. In this model, no additional assumptions regarding metrics are made. (author). 14 refs.

Two dimensional analytical model for a reconfigurable field effect transistor

Science.gov (United States)

Ranjith, R.; Jayachandran, Remya; Suja, K. J.; Komaragiri, Rama S.

2018-02-01

This paper presents two-dimensional potential and current models for a reconfigurable field effect transistor (RFET). Two potential models which describe subthreshold and above-threshold channel potentials are developed by solving two-dimensional (2D) Poisson's equation. In the first potential model, 2D Poisson's equation is solved by considering constant/zero charge density in the channel region of the device to get the subthreshold potential characteristics. In the second model, accumulation charge density is considered to get above-threshold potential characteristics of the device. The proposed models are applicable for the device having lightly doped or intrinsic channel. While obtaining the mathematical model, whole body area is divided into two regions: gated region and un-gated region. The analytical models are compared with technology computer-aided design (TCAD) simulation results and are in complete agreement for different lengths of the gated regions as well as at various supply voltage levels.

Investigating Flight with a Toy Helicopter

Science.gov (United States)

Liebl, Michael

2010-01-01

Flight fascinates people of all ages. Recent advances in battery technology have extended the capabilities of model airplanes and toy helicopters. For those who have never outgrown a childhood enthusiasm for the wonders of flight, it is possible to buy inexpensive, remotely controlled planes and helicopters. A toy helicopter offers an opportunity…

Discrete-to-continuum modelling of weakly interacting incommensurate two-dimensional lattices.

Science.gov (United States)

Español, Malena I; Golovaty, Dmitry; Wilber, J Patrick

2018-01-01

In this paper, we derive a continuum variational model for a two-dimensional deformable lattice of atoms interacting with a two-dimensional rigid lattice. The starting point is a discrete atomistic model for the two lattices which are assumed to have slightly different lattice parameters and, possibly, a small relative rotation. This is a prototypical example of a three-dimensional system consisting of a graphene sheet suspended over a substrate. We use a discrete-to-continuum procedure to obtain the continuum model which recovers both qualitatively and quantitatively the behaviour observed in the corresponding discrete model. The continuum model predicts that the deformable lattice develops a network of domain walls characterized by large shearing, stretching and bending deformation that accommodates the misalignment and/or mismatch between the deformable and rigid lattices. Two integer-valued parameters, which can be identified with the components of a Burgers vector, describe the mismatch between the lattices and determine the geometry and the details of the deformation associated with the domain walls.

Toys in space

Science.gov (United States)

1985-01-01

The pictured toys will be carried aboard the Challenger on the STS 51-D mission as part of a study of physics in cooperation with the Houston Museum of Natural Sciences. The toys include a yoyo, paddleball, friction powered toy car, flipping mouse, top, ball and jacks, gyroscopes, Slinky and Wheelo.

Lotus Effect Toy

Science.gov (United States)

Shakerin, Said

2011-01-01

This is a short article about Aqua Drop, a toy that employs a superhydrophobic surface. After defining superhydrophobic surface, its occurrence in nature, and its importance in science and technology, I describe the toy, followed by several student activities that can be performed with the toy and easily found natural objects.

Classical symmetries of some two-dimensional models

International Nuclear Information System (INIS)

Schwarz, J.H.

1995-01-01

It is well-known that principal chiral models and symmetric space models in two-dimensional Minkowski space have an infinite-dimensional algebra of hidden symmetries. Because of the relevance of symmetric space models to duality symmetries in string theory, the hidden symmetries of these models are explored in some detail. The string theory application requires including coupling to gravity, supersymmetrization, and quantum effects. However, as a first step, this paper only considers classical bosonic theories in flat space-time. Even though the algebra of hidden symmetries of principal chiral models is confirmed to include a Kac-Moody algebra (or a current algebra on a circle), it is argued that a better interpretation is provided by a doubled current algebra on a semi-circle (or line segment). Neither the circle nor the semi-circle bears any apparent relationship to the physical space. For symmetric space models the line segment viewpoint is shown to be essential, and special boundary conditions need to be imposed at the ends. The algebra of hidden symmetries also includes Virasoro-like generators. For both principal chiral models and symmetric space models, the hidden symmetry stress tensor is singular at the ends of the line segment. (orig.)

One-neutron transfer reaction: a toy model in one dimension

International Nuclear Information System (INIS)

G. Galilei, Padova, Italy INFN, Sezione di Padova, Padova (Italy))" data-affiliation=" (Dipartimento di Fisica e Astronomia G. Galilei, Padova, Italy INFN, Sezione di Padova, Padova (Italy))" >Moschini, L

2014-01-01

A simple 1D toy model to study one-neutron transfer reactions is developed. It is based on the solution of the time dependent Schroedinger equation for a particle initially bound by a fixed potential well, perturbed by a second moving potential, which accounts for the second partner of the reaction. At the end of the time evolution it is possible to evaluate the probability of the transfer of the particle from a potential to the other, as well as the transfer to continuum states in the case of weakly-bound systems. Although rather simple, the model accounts for most of the physical characteristics of these kind of reactions: such as the existence of an optimum Q-value and the dependence on the parameters defining the relative motion of the two potentials

Food marketing to children through toys: response of restaurants to the first U.S. toy ordinance.

Science.gov (United States)

Otten, Jennifer J; Hekler, Eric B; Krukowski, Rebecca A; Buman, Matthew P; Saelens, Brian E; Gardner, Christopher D; King, Abby C

2012-01-01

On August 9, 2010, Santa Clara County CA became the first U.S. jurisdiction to implement an ordinance that prohibits the distribution of toys and other incentives to children in conjunction with meals, foods, or beverages that do not meet minimal nutritional criteria. Restaurants had many different options for complying with this ordinance, such as introducing more healthful menu options, reformulating current menu items, or changing marketing or toy distribution practices. To assess how ordinance-affected restaurants changed their child menus, marketing, and toy distribution practices relative to non-affected restaurants. Children's menu items and child-directed marketing and toy distribution practices were examined before and at two time points after ordinance implementation (from July through November 2010) at ordinance-affected fast-food restaurants compared with demographically matched unaffected same-chain restaurants using the Children's Menu Assessment tool. Affected restaurants showed a 2.8- to 3.4-fold improvement in Children's Menu Assessment scores from pre- to post-ordinance with minimal changes at unaffected restaurants. Response to the ordinance varied by restaurant. Improvements were seen in on-site nutritional guidance; promotion of healthy meals, beverages, and side items; and toy marketing and distribution activities. The ordinance appears to have positively influenced marketing of healthful menu items and toys as well as toy distribution practices at ordinance-affected restaurants, but did not affect the number of healthful food items offered. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Proposal of a new model to improve the collection of small WEEE: a pilot project for the recovery and recycling of toys.

Science.gov (United States)

Solé, Miquel; Watson, Jenna; Puig, Rita; Fullana-i-Palmer, Pere

2012-11-01

A new collection model was designed and tested in Catalonia (Spain) to foster the separate collection and recycling of electrical and electronic toys, with the participation of selected primary and secondary schools, as well as waste collection points and municipalities. This project approach is very original and important because small household WEEE has low rates of collection (16-21% WEEE within the EU or 5-7% WEEE in Spain) and no research on new approaches to enhance the collection of small WEEE is found in the literature. The project was successful in achieving enhanced toys collection and recycling rates, which went up from the national Spanish average of 0.5% toys before the project to 1.9 and 6% toys during the two project years, respectively. The environmental benefits of the campaign were calculated through a life-cycle approach, accounting for the avoided impact afforded by the reuse of the toys and the recycling of the valuable materials contained therein (such as metals, batteries and circuit boards) and subtracting the additional environmental burdens associated with the establishment of the collection campaign.

``Models'' CAVEAT EMPTOR!!!: ``Toy Models Too-Often Yield Toy-Results''!!!: Statistics, Polls, Politics, Economics, Elections!!!: GRAPH/Network-Physics: ``Equal-Distribution for All'' TRUMP-ED BEC ``Winner-Take-All'' ``Doctor Livingston I Presume?''

Science.gov (United States)

Preibus-Norquist, R. N. C.-Grover; Bush-Romney, G. W.-Willard-Mitt; Dimon, J. P.; Adelson-Koch, Sheldon-Charles-David-Sheldon; Krugman-Axelrod, Paul-David; Siegel, Edward Carl-Ludwig; D. N. C./O. F. P./''47''%/50% Collaboration; R. N. C./G. O. P./''53''%/49% Collaboration; Nyt/Wp/Cnn/Msnbc/Pbs/Npr/Ft Collaboration; Ftn/Fnc/Fox/Wsj/Fbn Collaboration; Lb/Jpmc/Bs/Boa/Ml/Wamu/S&P/Fitch/Moodys/Nmis Collaboration

2013-03-01

``Models''? CAVEAT EMPTOR!!!: ``Toy Models Too-Often Yield Toy-Results''!!!: Goldenfeld[``The Role of Models in Physics'', in Lects.on Phase-Transitions & R.-G.(92)-p.32-33!!!]: statistics(Silver{[NYTimes; Bensinger, ``Math-Geerks Clearly-Defeated Pundits'', LATimes, (11/9/12)])}, polls, politics, economics, elections!!!: GRAPH/network/net/...-PHYSICS Barabasi-Albert[RMP (02)] (r,t)-space VERSUS(???) [Where's the Inverse/ Dual/Integral-Transform???] (Benjamin)Franklin(1795)-Fourier(1795; 1897;1822)-Laplace(1850)-Mellin (1902) Brillouin(1922)-...(k,)-space, {Hubbard [The World According to Wavelets,Peters (96)-p.14!!!/p.246: refs.-F2!!!]},and then (2) Albert-Barabasi[]Bose-Einstein quantum-statistics(BEQS) Bose-Einstein CONDENSATION (BEC) versus Bianconi[pvt.-comm.; arXiv:cond-mat/0204506; ...] -Barabasi [???] Fermi-Dirac

Toy Model of Frame-Dragging Magnetosphere for the M87 Jet

Indian Academy of Sciences (India)

2016-01-27

Jan 27, 2016 ... Toy Model of Frame-Dragging Magnetosphere for the M87 Jet ... The outermost layer of jet is driven by the frame-dragging effect in the Kerr ... All these have helped shorten the publication time and have improved the visibility ...

High-velocity two-phase flow two-dimensional modeling

International Nuclear Information System (INIS)

Mathes, R.; Alemany, A.; Thilbault, J.P.

1995-01-01

The two-phase flow in the nozzle of a LMMHD (liquid metal magnetohydrodynamic) converter has been studied numerically and experimentally. A two-dimensional model for two-phase flow has been developed including the viscous terms (dragging and turbulence) and the interfacial mass, momentum and energy transfer between the phases. The numerical results were obtained by a finite volume method based on the SIMPLE algorithm. They have been verified by an experimental facility using air-water as a simulation pair and a phase Doppler particle analyzer for velocity and droplet size measurement. The numerical simulation of a lithium-cesium high-temperature pair showed that a nearly homogeneous and isothermal expansion of the two phases is possible with small pressure losses and high kinetic efficiencies. In the throat region a careful profiling is necessary to reduce the inertial effects on the liquid velocity field

Toy Control Program evaluation.

Science.gov (United States)

Stewart, H A; Ormond, C; Seeger, B R

1991-08-01

The Toy Control Program for the Apple IIe microcomputer is a software and hardware package developed for the training of single-switch scanning skills. The specially designed scanning programs provide on screen visual feedback and activate a battery-powered toy to reinforce performance. This study examined whether the training of preschool subjects in single-switch scanning skills with the Toy Control Program would result in increased task completion scores and increased levels of attention to task, as compared with conditions of toy activation only and microcomputer programs with screen reinforcement only. The results showed that the subjects paid significantly more attention to the toys as reinforcers (p less than .01). No significant difference was found for the performance results of the three conditions. These findings support the use of a program like the Toy Control Program, which integrates the instructional capabilities of a computer with the reinforcement potential of a toy and the creativity of a therapist.

Extended inflation from higher dimensional theories

International Nuclear Information System (INIS)

Holman, R.; Kolb, E.W.; Vadas, S.L.; Wang, Yun.

1990-04-01

The possibility is considered that higher dimensional theories may, upon reduction to four dimensions, allow extended inflation to occur. Two separate models are analayzed. One is a very simple toy model consisting of higher dimensional gravity coupled to a scalar field whose potential allows for a first-order phase transition. The other is a more sophisticated model incorporating the effects of non-trivial field configurations (monopole, Casimir, and fermion bilinear condensate effects) that yield a non-trivial potential for the radius of the internal space. It was found that extended inflation does not occur in these models. It was also found that the bubble nucleation rate in these theories is time dependent unlike the case in the original version of extended inflation

Folk toys in Central Thailand: Product development for a creative economy

Directory of Open Access Journals (Sweden)

Wanna Pichetpruth

2015-11-01

, cap gun, nungstrik gun, whistle, pong-pang, bamboo flute, wote and wihoksaipha; 2 pleasure and imaginative toys, such as kanghan, rotated kanghan, airplane, kalong, chackachan, pla-tapian, waling karian bird and flying bird; 3 games, such as kalakaokwai, wooden alligators, wooden swords and arrows; and 4 models, such as talapcap, trucks, tricycles, boats, lookfat, kites, eko, mokawmokeang, dinosaurs, buffalo, tang, motorcycles, jet planes and house models. Nowadays, toys are made as an enterprise, using more external materials, chemical colors, different styles and models. Furthermore, toy production helps to conserve central Thai identity, child growth and Thai lifestyle.

TWO-DIMENSIONAL CORE-COLLAPSE SUPERNOVA MODELS WITH MULTI-DIMENSIONAL TRANSPORT

International Nuclear Information System (INIS)

Dolence, Joshua C.; Burrows, Adam; Zhang, Weiqun

2015-01-01

We present new two-dimensional (2D) axisymmetric neutrino radiation/hydrodynamic models of core-collapse supernova (CCSN) cores. We use the CASTRO code, which incorporates truly multi-dimensional, multi-group, flux-limited diffusion (MGFLD) neutrino transport, including all relevant O(v/c) terms. Our main motivation for carrying out this study is to compare with recent 2D models produced by other groups who have obtained explosions for some progenitor stars and with recent 2D VULCAN results that did not incorporate O(v/c) terms. We follow the evolution of 12, 15, 20, and 25 solar-mass progenitors to approximately 600 ms after bounce and do not obtain an explosion in any of these models. Though the reason for the qualitative disagreement among the groups engaged in CCSN modeling remains unclear, we speculate that the simplifying ''ray-by-ray'' approach employed by all other groups may be compromising their results. We show that ''ray-by-ray'' calculations greatly exaggerate the angular and temporal variations of the neutrino fluxes, which we argue are better captured by our multi-dimensional MGFLD approach. On the other hand, our 2D models also make approximations, making it difficult to draw definitive conclusions concerning the root of the differences between groups. We discuss some of the diagnostics often employed in the analyses of CCSN simulations and highlight the intimate relationship between the various explosion conditions that have been proposed. Finally, we explore the ingredients that may be missing in current calculations that may be important in reproducing the properties of the average CCSNe, should the delayed neutrino-heating mechanism be the correct mechanism of explosion

2 + 1 quantum gravity as a toy model for the 3 + 1 theory

International Nuclear Information System (INIS)

Ashtekar, A.; Husain, V.; Smolin, L.; Samuel, J.; Utah Univ., Salt Lake City, UT

1989-01-01

2 + 1 Einstein gravity is used as a toy model for testing a program for non-perturbative canonical quantisation of the 3 + 1 theory. The program can be successfully implemented in the model and leads to a surprisingly rich quantum theory. (author)

Toy Story

DEFF Research Database (Denmark)

Cole, Anne Jodon; Petersson Brooks, Eva

2016-01-01

a mediating device between adults and children. The question then becomes, how does a display of static toys speak to a child’s culture of play? Through interviews with toy museum curators and personal observations it was found that the exhibition was designed to have adults share and reflect stories about...

Assessment of toxic metals and phthalates in children's toys and clays.

Science.gov (United States)

Korfali, Samira I; Sabra, Rayan; Jurdi, Mey; Taleb, Robin I

2013-10-01

Toxic metals and phthalates are introduced in the manufacturing of plastic toys and modeling clays. In Lebanon, inexpensive plastic toys and modeling clays (sold in dollar stores) are affordable and popular, and there is no legislation to monitor or regulate such toys. This study aimed to assess the quality of inexpensive plastic toys and modeling clays imported in Lebanon. Metal concentrations in toys, namely, zinc [not detectable (ND) to 3,708 μg/g], copper (ND to 140), chromium (ND to 75 μg/g), tin (ND to 39 μg/g), and cadmium (Cd) (ND to 20 μg/g), were lower than the European Union (EU) Directive limits, whereas lead (ND to 258 μg/g) in 10% of samples and antimony (Sb) (ND to 195 μg/g) in 5% of samples were greater than the EU limits. In modeling clays, most of the metals were lower than the EU Directive limits except for Cd and arsenic (As). Cd was detected in 83% of samples, with a mean level of 9.1 μg/g, which is far greater than the EU Directive limit (1.9 μg/g). The As mean level of 4.5 μg/g was greater than the EU limit (4.0 μg/g) and was detected in 9% of samples. Phthalic acid esters (PAEs) were found in 60% of children's toys and 77% of modeling clays. Phthalic acid butyl ester had the highest-level PAE encountered and was ≤59.1 % in one type of clay. However, among children's toys, di(4-octyl) ester terephthalic acid was the highest encountered phthalate at a concentration of 25.7%. The community survey indicated that 82% of households purchase their toys from inexpensive shops and that only 17% of parents were aware of the health hazard of such toys. Consequently, an intervention plan was proposed for the provision of safe toys to children.

Fractional calculus phenomenology in two-dimensional plasma models

Science.gov (United States)

Gustafson, Kyle; Del Castillo Negrete, Diego; Dorland, Bill

2006-10-01

Transport processes in confined plasmas for fusion experiments, such as ITER, are not well-understood at the basic level of fully nonlinear, three-dimensional kinetic physics. Turbulent transport is invoked to describe the observed levels in tokamaks, which are orders of magnitude greater than the theoretical predictions. Recent results show the ability of a non-diffusive transport model to describe numerical observations of turbulent transport. For example, resistive MHD modeling of tracer particle transport in pressure-gradient driven turbulence for a three-dimensional plasma reveals that the superdiffusive (2̂˜t^α where α> 1) radial transport in this system is described quantitatively by a fractional diffusion equation Fractional calculus is a generalization involving integro-differential operators, which naturally describe non-local behaviors. Our previous work showed the quantitative agreement of special fractional diffusion equation solutions with numerical tracer particle flows in time-dependent linearized dynamics of the Hasegawa-Mima equation (for poloidal transport in a two-dimensional cold-ion plasma). In pursuit of a fractional diffusion model for transport in a gyrokinetic plasma, we now present numerical results from tracer particle transport in the nonlinear Hasegawa-Mima equation and a planar gyrokinetic model. Finite Larmor radius effects will be discussed. D. del Castillo Negrete, et al, Phys. Rev. Lett. 94, 065003 (2005).

Absence of vortex condensation in a two dimensional fermionic XY model

International Nuclear Information System (INIS)

Cecile, D. J.; Chandrasekharan, Shailesh

2008-01-01

Motivated by a puzzle in the study of two-dimensional lattice quantum electrodynamics with staggered fermions, we construct a two-dimensional fermionic model with a global U(1) symmetry. Our model can be mapped into a model of closed packed dimers and plaquettes. Although the model has the same symmetries as the XY model, we show numerically that the model lacks the well-known Kosterlitz-Thouless phase transition. The model is always in the gapless phase showing the absence of a phase with vortex condensation. In other words the low energy physics is described by a noncompact U(1) field theory. We show that by introducing an even number of layers one can introduce vortex condensation within the model and thus also induce a Kosterlitz-Thouless transition.

Two-dimensional model of coupled heat and moisture transport in frost-heaving soils

International Nuclear Information System (INIS)

Guymon, G.L.; Berg, R.L.; Hromadka, T.V.

1984-01-01

A two-dimensional model of coupled heat and moisture flow in frost-heaving soils is developed based upon well known equations of heat and moisture flow in soils. Numerical solution is by the nodal domain integration method which includes the integrated finite difference and the Galerkin finite element methods. Solution of the phase change process is approximated by an isothermal approach and phenomenological equations are assumed for processes occurring in freezing or thawing zones. The model has been verified against experimental one-dimensional freezing soil column data and experimental two-dimensional soil thawing tank data as well as two-dimensional soil seepage data. The model has been applied to several simple but useful field problems such as roadway embankment freezing and frost heaving

Noise Measurement and Frequency Analysis of Commercially Available Noisy Toys

Directory of Open Access Journals (Sweden)

Shohreh Jalaie

2005-06-01

Full Text Available Objective: Noise measurement and frequency analysis of commercially available noisy toys were the main purposes of the study. Materials and Methods: 181 noisy toys commonly found in toy stores in different zones of Tehran were selected and categorized into 10 groups. Noise measurement were done at 2, 25, and 50 cm from toys in dBA. The noisiest toy of each group was frequency analyzed in octave bands. Results: The highest and the lowest intensity levels belonged to the gun (mean=112 dBA and range of 100-127 dBA and to the rattle-box (mean=84 dBA and range of 74-95 dBA, respectively. Noise intensity levels significantly decreased with increasing distance except for two toys. Noise frequency analysis indicated energy in effective hearing frequencies. Most of the toys energies were in the middle and high frequency region. Conclusion: As intensity level of the toys is considerable, mostly more than 90 dBA, and also their energy exist in the middle and high frequency region, toys should be considered as a cause of the hearing impairment.

Bimanual Behaviours in Children Aged 8-18 Months: A Literature Review to Select Toys that Elicit the Use of Two Hands

Science.gov (United States)

Greaves, Susan; Imms, Christine; Krumlinde-Sundholm, Lena; Dodd, Karen; Eliasson, Ann-Christin

2012-01-01

Toys that provoke the use of both hands are required to develop a test of bimanual performance in children 8-18 months with unilateral cerebral palsy (Mini-AHA). To choose the toys, a conceptual model based on perception-action theory and object use was used to guide a literature review. Evidence was sought for three critical relationships…

Two-dimensional divertor modeling and scaling laws

International Nuclear Information System (INIS)

Catto, P.J.; Connor, J.W.; Knoll, D.A.

1996-01-01

Two-dimensional numerical models of divertors contain large numbers of dimensionless parameters that must be varied to investigate all operating regimes of interest. To simplify the task and gain insight into divertor operation, we employ similarity techniques to investigate whether model systems of equations plus boundary conditions in the steady state admit scaling transformations that lead to useful divertor similarity scaling laws. A short mean free path neutral-plasma model of the divertor region below the x-point is adopted in which all perpendicular transport is due to the neutrals. We illustrate how the results can be used to benchmark large computer simulations by employing a modified version of UEDGE which contains a neutral fluid model. (orig.)

Equivalence of two-dimensional gravities

International Nuclear Information System (INIS)

Mohammedi, N.

1990-01-01

The authors find the relationship between the Jackiw-Teitelboim model of two-dimensional gravity and the SL(2,R) induced gravity. These are shown to be related to a two-dimensional gauge theory obtained by dimensionally reducing the Chern-Simons action of the 2 + 1 dimensional gravity. The authors present an explicit solution to the equations of motion of the auxiliary field of the Jackiw-Teitelboim model in the light-cone gauge. A renormalization of the cosmological constant is also given

Toys and toilets: cross-sectional study using children's toys to evaluate environmental faecal contamination in rural Bangladeshi households with different sanitation facilities and practices.

Science.gov (United States)

Vujcic, Jelena; Ram, Pavani K; Hussain, Faruqe; Unicomb, Leanne; Gope, Partha Sarathi; Abedin, Jaynal; Mahmud, Zahid Hayat; Islam, M Sirajul; Luby, Stephen P

2014-05-01

To evaluate household faecal contamination using children's toys among 100 rural Bangladeshi households categorised as 'cleaner' (toilet that reliably separates faeces from the environment and no human faeces in/around living space) or 'less clean' (no toilet or toilet that does not reliably separate faeces from the environment and human faeces in/around living space). We distributed toy balls to each household and rinsed each study toy and a toy already owned by the household in 200 ml of Ringer's solution. We enumerated faecal coliforms and faecal streptococci from each rinse using membrane filtration methods. Study toys from 39 cleaner households had lower mean faecal coliform contamination than toys from 61 less clean households (2.4 log10 colony-forming units (CFU)/200 ml vs. 3.2 log10 CFU/200 ml, P = 0.03). However, wealth measures explained a portion of this relationship. Repeat measures were moderately variable [coefficient of variation (CV) = 6.5 between two toys in the household at the same time, CV = 37.6 between toys in the household at two different times 3-4 days apart]. Too few households owned a non-porous toy to compare groups without risk of bias. In rural Bangladesh, improved sanitation facilities and practices were associated with less environmental contamination. Whether this association is independent of household wealth and whether the difference in contamination improves child health merit further study. The variation found was typical for measures of environmental contamination, and requires large sample sizes to ascertain differences between groups with statistical significance. © 2014 John Wiley & Sons Ltd.

Model of two-dimensional electron gas formation at ferroelectric interfaces

Energy Technology Data Exchange (ETDEWEB)

Aguado-Puente, P.; Bristowe, N. C.; Yin, B.; Shirasawa, R.; Ghosez, Philippe; Littlewood, P. B.; Artacho, Emilio

2015-07-01

The formation of a two-dimensional electron gas at oxide interfaces as a consequence of polar discontinuities has generated an enormous amount of activity due to the variety of interesting effects it gives rise to. Here, we study under what circumstances similar processes can also take place underneath ferroelectric thin films. We use a simple Landau model to demonstrate that in the absence of extrinsic screening mechanisms, a monodomain phase can be stabilized in ferroelectric films by means of an electronic reconstruction. Unlike in the LaAlO3/SrTiO3 heterostructure, the emergence with thickness of the free charge at the interface is discontinuous. This prediction is confirmed by performing first-principles simulations of free-standing slabs of PbTiO3. The model is also used to predict the response of the system to an applied electric field, demonstrating that the two-dimensional electron gas can be switched on and off discontinuously and in a nonvolatile fashion. Furthermore, the reversal of the polarization can be used to switch between a two-dimensional electron gas and a two-dimensional hole gas, which should, in principle, have very different transport properties. We discuss the possible formation of polarization domains and how such configuration competes with the spontaneous accumulation of free charge at the interfaces.

Two-dimensional horizontal model seismic test and analysis for HTGR core

International Nuclear Information System (INIS)

Ikushima, Takeshi; Honma, Toshiaki.

1988-05-01

The resistance against earthquakes of high-temperature gas-cooled reactor (HTGR) core with block-type fuels is not fully ascertained yet. Seismic studies must be made if such a reactor plant is to be installed in areas with frequent earthquakes. The paper presented the test results of seismic behavior of a half scale two-dimensional horizontal slice core model and analysis. The following is a summary of the more important results. (1) When the core is subjected to the single axis excitation and simultaneous two-axis excitations to the core across-corners, it has elliptical motion. The core stays lumped motion at the low excitation frequencies. (2) When the load is placed on side fixed reflector blocks from outside to the core center, the core displacement and reflector impact reaction force decrease. (3) The maximum displacement occurs at simultaneous two-axis excitations. The maximum displacement occurs at the single axis excitation to the core across-flats. (4) The results of two-dimensional horizontal slice core model was compared with the results of two-dimensional vertical one. It is clarified that the seismic response of actual core can be predicted from the results of two-dimensional vertical slice core model. (5) The maximum reflector impact reaction force for seismic waves was below 60 percent of that for sinusoidal waves. (6) Vibration behavior and impact response are in good agreement between test and analysis. (author)

A Semi-implicit Numerical Scheme for a Two-dimensional, Three-field Thermo-Hydraulic Modeling

International Nuclear Information System (INIS)

Hwang, Moonkyu; Jeong, Jaejoon

2007-07-01

The behavior of two-phase flow is modeled, depending on the purpose, by either homogeneous model, drift flux model, or separated flow model, Among these model, in the separated flow model, the behavior of each flow phase is modeled by its own governing equation, together with the interphase models which describe the thermal and mechanical interactions between the phases involved. In this study, a semi-implicit numerical scheme for two-dimensional, transient, two-fluid, three-field is derived. The work is an extension to the previous study for the staggered, semi-implicit numerical scheme in one-dimensional geometry (KAERI/TR-3239/2006). The two-dimensional extension is performed by specifying a relevant governing equation set and applying the related finite differencing method. The procedure for employing the semi-implicit scheme is also described in detail. Verifications are performed for a 2-dimensional vertical plate for a single-phase and two-phase flows. The calculations verify the mass and energy conservations. The symmetric flow behavior, for the verification problem, also confirms the momentum conservation of the numerical scheme

Surface Ship Shock Modeling and Simulation: Two-Dimensional Analysis

Directory of Open Access Journals (Sweden)

Young S. Shin

1998-01-01

Full Text Available The modeling and simulation of the response of a surface ship system to underwater explosion requires an understanding of many different subject areas. These include the process of underwater explosion events, shock wave propagation, explosion gas bubble behavior and bubble-pulse loading, bulk and local cavitation, free surface effect, fluid-structure interaction, and structural dynamics. This paper investigates the effects of fluid-structure interaction and cavitation on the response of a surface ship using USA-NASTRAN-CFA code. First, the one-dimensional Bleich-Sandler model is used to validate the approach, and second, the underwater shock response of a two-dimensional mid-section model of a surface ship is predicted with a surrounding fluid model using a constitutive equation of a bilinear fluid which does not allow transmission of negative pressures.

Children's Reactions to Television Advertising for Toys.

Science.gov (United States)

Gorn, Gerald J.; Goldberg, Marvin E.

This study investigated both the effects of expectancy and TV commercials using an expectancy-value model. In a 3 x 5 factorial design, eight- to ten-year-old boys (N=133) were presented with low, moderate or high expectancies of winning a toy, followed by exposure to 0, 1 or 3 repetitions of a TV commercial for the toy. High expectancy led to…

Two-dimensional model of a freely expanding plasma

International Nuclear Information System (INIS)

Khalid, Q.

1975-01-01

The free expansion of an initially confined plasma is studied by the computer experiment technique. The research is an extension to two dimensions of earlier work on the free expansion of a collisionless plasma in one dimension. In the two-dimensional rod model, developed in this research, the plasma particles, electrons and ions are modeled as infinitely long line charges or rods. The line charges move freely in two dimensions normal to their parallel axes, subject only to a self-consistent electric field. Two approximations, the grid approximation and the periodic boundary condition are made in order to reduce the computation time. In the grid approximation, the space occupied by the plasma at a given time is divided into boxes. The particles are subject to an average electric field calculated for that box assuming that the total charge within each box is located at the center of the box. However, the motion of each particle is exactly followed. The periodic boundary condition allows us to consider only one-fourth of the total number of particles of the plasma, representing the remaining three-fourths of the particles as symmetrically placed images of those whose positions are calculated. This approximation follows from the expected azimuthal symmetry of the plasma. The dynamics of the expansion are analyzed in terms of average ion and electron positions, average velocities, oscillation frequencies and relative distribution of energy between thermal, flow and electric field energies. Comparison is made with previous calculations of one-dimensional models which employed plane, spherical or cylindrical sheets as charged particles. In order to analyze the effect of the grid approximation, the model is solved for two different grid sizes and for each grid size the plasma dynamics is determined. For the initial phase of expansion, the agreement for the two grid sizes is found to be good

Nonlinear dynamics and modelling of various wooden toys with impact and friction

NARCIS (Netherlands)

Leine, R.I.; Campen, van D.H.; Glocker, C.

2003-01-01

In this paper, we study bifurcations in systems with impact and friction, modeled with a rigid multibody approach. Knowledge from the field of nonlinear dynamics is therefore combined with theory from the field of non-smooth mechanics. We study the nonlinear dynamics of three commercial wooden toys.

Two-dimensional models in statistical mechanics and field theory

International Nuclear Information System (INIS)

Koberle, R.

1980-01-01

Several features of two-dimensional models in statistical mechanics and Field theory, such as, lattice quantum chromodynamics, Z(N), Gross-Neveu and CP N-1 are discussed. The problems of confinement and dynamical mass generation are also analyzed. (L.C.) [pt

Art Toys in the contemporary art scene

Directory of Open Access Journals (Sweden)

Laura Sernissi

2014-03-01

Full Text Available The Art Toys phenomenon, better known as Art Toy Movement, was born in China in the mid-nineties and quickly spread out to the rest of the world. The toys are an artistic production of serial sculpture, made by handcrafts or on an industrial scale. There are several types of toys, such as custom toys and canvas toys, synonyms of designer toys, although they are often defined according to the constituent material, such as vinyl toys (plastic and plush toys (fabric. Art toys are the heirs of an already pop-surrealist and neo-pop circuit, which since the eighties of the twentieth century has pervaded the Japanese-American art scene, winking to the playful spirit of the avant-garde of the early century. Some psychoanalytic, pedagogical and anthropological studies about “play theories”, may also help us to understand and identify these heterogeneous products as real works of art and not simply as collectible toys.

Chiral dynamics and heavy quark symmetry in a solvable toy field-theoretic model

International Nuclear Information System (INIS)

Bardeen, W.A.; Hill, C.T.

1994-01-01

We study a solvable QCD-like toy theory, a generalization of the Nambu--Jona-Lasinio model, which implements chiral symmetries of light quarks and heavy quark symmetry. The chiral symmetric and chiral broken phases can be dynamically tuned. This implies a parity-doubled heavy-light meson system, corresponding to a (0 - ,1 - ) multiplet and a (0 + ,1 + ) heavy spin multiplet. Consequently the mass difference of the two multiplets is given by a Goldberger-Treiman relation and g A is found to be small. The Isgur-Wise function ξ(w), the decay constant f B , and other observables are studied

Ferromagnetism in the two-dimensional periodic Anderson model

International Nuclear Information System (INIS)

Batista, C. D.; Bonca, J.; Gubernatis, J. E.

2001-01-01

Using the constrained-path Monte Carlo method, we studied the magnetic properties of the two-dimensional periodic Anderson model for electron fillings between 1/4 and 1/2. We also derived two effective low-energy theories to assist in interpreting the numerical results. For 1/4 filling, we found that the system can be a Mott or a charge-transfer insulator, depending on the relative values of the Coulomb interaction and the charge-transfer gap between the two noninteracting bands. The insulator may be a paramagnet or antiferromagnet. We concentrated on the effect of electron doping on these insulating phases. Upon doping we obtained a partially saturated ferromagnetic phase for low concentrations of conduction electrons. If the system were a charge-transfer insulator, we would find that the ferromagnetism is induced by the well-known Ruderman-Kittel-Kasuya-Yosida interaction. However, we found a novel correlated hopping mechanism inducing the ferromagnetism in the region where the nondoped system is a Mott insulator. Our regions of ferromagnetism spanned a much smaller doping range than suggested by recent slave boson and dynamical mean-field theory calculations, but they were consistent with that obtained by density-matrix renormalization group calculations of the one-dimensional periodic Anderson model

Two-Dimensional Depth-Averaged Beach Evolution Modeling: Case Study of the Kizilirmak River Mouth, Turkey

DEFF Research Database (Denmark)

Baykal, Cüneyt; Ergin, Ayşen; Güler, Işikhan

2014-01-01

investigated by satellite images, physical model tests, and one-dimensional numerical models. The current study uses a two-dimensional depth-averaged numerical beach evolution model, developed based on existing methodologies. This model is mainly composed of four main submodels: a phase-averaged spectral wave......This study presents an application of a two-dimensional beach evolution model to a shoreline change problem at the Kizilirmak River mouth, which has been facing severe coastal erosion problems for more than 20 years. The shoreline changes at the Kizilirmak River mouth have been thus far...... transformation model, a two-dimensional depth-averaged numerical waveinduced circulation model, a sediment transport model, and a bottom evolution model. To validate and verify the numerical model, it is applied to several cases of laboratory experiments. Later, the model is applied to a shoreline change problem...

Two dimensional, two fluid model for sodium boiling in LMFBR fuel assemblies

International Nuclear Information System (INIS)

Granziera, M.R.; Kazimi, M.S.

1980-05-01

A two dimensional numerical model for the simulation of sodium boiling transient was developed using the two fluid set of conservation equations. A semiimplicit numerical differencing scheme capable of handling the problems associated with the ill-posedness implied by the complex characteristic roots of the two fluid problems was used, which took advantage of the dumping effect of the exchange terms. Of particular interest in the development of the model was the identification of the numerical problems caused by the strong disparity between the axial and radial dimensions of fuel assemblies. A solution to this problem was found which uses the particular geometry of fuel assemblies to accelerate the convergence of the iterative technique used in the model. Three sodium boiling experiments were simulated with the model, with good agreement between the experimental results and the model predictions

Loudness and acoustic parameters of popular children's toys.

Science.gov (United States)

Ghavami, Yaser; Bhatt, Jay; Maducdoc, Marlon; Yau, Amy; Mahboubi, Hossein; Ziai, Kasra; Lin, Harrison W; Djalilian, Hamid R

2015-12-01

This project was conducted to evaluate the loudness and acoustic parameters of toys designed for children. In addition, we investigated whether occluding the toys' speaker with tape would result in a significant loudness reduction; thereby potentially reducing the risk of noise induced hearing loss. Twenty-six toys were selected after an initial screening at two national retailers. Noise amplitudes at 0.25, 0.5, 1, 2, 4, and 8kHz were measured using a digital sound level meter at a distance of 0 and 30cm. The toys' speakers were then occluded using adhesive tape and the same acoustic parameters were re-measured. Mean maximum noise amplitude of the toys at 0cm and 30cm was 104dBA (range, 97-125dBA) and 76dBA (range, 67-86dBA), respectively. Mean maximum noise amplitude after occlusion at 0cm and 30cm distances was 88dBA (range, 73-110dBA) and 66dBA (range, 55-82dBA), respectively, with a p-value toys at a distant of 30cm between the speaker and the child's ear will likely not pose a risk of noise-induced hearing loss. However, since most toys are used at closer distances, use of adhesive tape is recommended as an effective modification to decrease the risk of hearing loss. Published by Elsevier Ireland Ltd.

Resolving the chemical structures of off-odorants and potentially harmful substances in toys-example of children's swords.

Science.gov (United States)

Denk, Philipp; Velasco-Schön, Cristina; Buettner, Andrea

2017-09-01

Most children's toys on the market are primarily made out of plastic and other complex composite materials. Consumer complaints about offensive odors or irritating effects associated with toy products have increased in recent years. One example is the strongly perceivable negative odor reported for a particular series of toy swords. Characterizing the presence of contaminants, including those that have the potential to be deleterious to health, in such products is a significant analytical challenge due to the high baseline abundance of chemical constituents of the materials used in the products. In the present study, the nature of offensive odorants associated with toy sword products was examined by gas chromatography (GC). After initial sensory evaluations, the volatile compounds from the toy products were recovered using solvent extraction and solvent-assisted flavor evaporation. The extracts were analyzed using GC-olfactometry (GC-O) and two-dimensional GC-O coupled with mass spectrometry (GC-GC-MS/O). A total of 26 odor-active compounds, including aromatic hydrocarbons and phenols, were identified among numerous non-odorous volatile by-products. These substances also included polycyclic aromatic hydrocarbons, which were analyzed by GC-MS. Representative substances were naphthalene and 1,2-dihydronaphthalene that exhibited moldy, mothball-like odor impressions, and phenol derivatives with leather-like, phenolic, horse-stable-like smells. The odorants detected correlated with the assigned attributes from the sensory analyses. This study clearly shows that the detection and identification of such odorous contaminants can provide key indications of potentially harmful yet unknown substances in everyday products such as toys. Graphical abstract ᅟ.

Indonesian Traditional Toys and the Development of Batik Motifs

Directory of Open Access Journals (Sweden)

Bagus Indrayana

2016-06-01

Full Text Available There is a wide array of traditional toys in Indonesia. In the past, traditional toys played an important role for skill and creativity development of children. Today, the position of traditional toys in the society is displaced by toys from large-scale manufacturers. Given the critical role of traditional toys for children’s motoric and social development, there is a need to develop media that can be used to promote these traditional products and strengthen their position in the public. We propose to use Batik as a way to effectively disseminate and promote traditional toys to the general public. Apart from this, using traditional toys to create new Batik motifs can have an economic value for the producers of Batik, promote Indonesian products and enrich the Indonesian Batik. This study aims to explore the variety of traditional toys, mainly from Klaten and Magelang, in the Central Java province of Indonesia, and use them as the basis for the development of Batik motif creation. This study used Trilogi Keseimbangan (or Harmony Trilogy aesthetic theory analytical approach that explains the creation of craft consists of the following phases: exploration, design, and materialization. The creation method in this study adopts Tiga Tahap Enam Langkah (Three Phases, Six Steps method offered in the theory. The finding in the field found that the traditional toys material used in Klaten and Magelang, mostly made from waste wood, plywood, and zinc. The manufacturing process is done manually by two or three craftsmen using a simple technology. The traditional toys are designed by the artisans mostly, although there may be designs from the clients. In addition, we also found that the traditional toys have never been used as a Batik motif. The traditional toys Batik motif presented in this work is researcher’s design. For the purposes of this study, we first research the variety of traditional toys available in the market today in Indonesia. We look

History of European and national toys

Directory of Open Access Journals (Sweden)

Smirnova E.O.

2016-03-01

Full Text Available The article examines the role of toys in the life and development of children. It traces the developmental trajectory of shaped toys in Europe and Russia from antiquity to the present day. It also shows the role of ideological factors in shaping the image of toys as well as long lasting contradiction between the developing features of toys and their market values. The article presents the comparative analysis of the image and the playing potential of the traditional and modern popular dolls. Functions of toys as mediums and tools for the transmission of cultural norms is exemplifies by gender stereotypes: it shows how the peculiarity of toys for boys and girls, affects the nature of the game. In the conclusion the article examines the main trends and problems of development of the market of modern toys.

Treatment of dynamical processes in two-dimensional models of the troposphere and stratosphere

International Nuclear Information System (INIS)

Wuebbles, D.J.

1980-07-01

The physical structure of the troposphere and stratosphere is the result of an intricate interplay among a large number of radiative, chemical, and dynamical processes. Because it is not possible to model the global environment in the laboratory, theoretical models must be relied on, subject to observational verification, to simulate atmospheric processes. Of particular concern in recent years has been the modeling of those processes affecting the structure of ozone and other trace species in the stratosphere and troposphere. Zonally averaged two-dimensional models with spatial resolution in the vertical and meridional directions can provide a much more realistic representation of tracer transport than one-dimensional models, yet are capable of the detailed representation of chemical and radiative processes contained in the one-dimensional models. The purpose of this study is to describe and analyze existing approaches to representing global atmospheric transport processes in two-dimensional models and to discuss possible alternatives to these approaches. A general description of the processes controlling the transport of trace constituents in the troposphere and stratosphere is given

Introducing Interactive Technology--"Toy Story 3"

Science.gov (United States)

Nikirk, Martin

2011-01-01

"To infinity and beyond!" is the catchphrase of Buzz Lightyear, Universe Protection Unit space ranger, a character in the Disney/Pixar "Toy Story" franchise. The three films in the franchise--"Toy Story," 1993; "Toy Story 2," 1999; and "Toy Story 3," 2010--incorporate an innovative blend of many different genres, having spun off video games and…

Helicopter Toy and Lift Estimation

Science.gov (United States)

Shakerin, Said

2013-01-01

A $1 plastic helicopter toy (called a Wacky Whirler) can be used to demonstrate lift. Students can make basic measurements of the toy, use reasonable assumptions and, with the lift formula, estimate the lift, and verify that it is sufficient to overcome the toy's weight. (Contains 1 figure.)

Comparison of one-, two-, and three-dimensional models for mass transport of radionuclides

International Nuclear Information System (INIS)

Prickett, T.A.; Voorhees, M.L.; Herzog, B.L.

1980-02-01

This technical memorandum compares one-, two-, and three-dimensional models for studying regional mass transport of radionuclides in groundwater associated with deep repository disposal of high-level radioactive wastes. In addition, this report outlines the general conditions for which a one- or two-dimensional model could be used as an alternate to a three-dimensional model analysis. The investigation includes a review of analytical and numerical models in addition to consideration of such conditions as rock and fluid heterogeneity, anisotropy, boundary and initial conditions, and various geometric shapes of repository sources and sinks. Based upon current hydrologic practice, each review is taken separately and discussed to the extent that the researcher can match his problem conditions with the minimum number of model dimensions necessary for an accurate solution

Children's Gender-Typed Toy Interests: Does Propulsion Matter?

Science.gov (United States)

Dinella, Lisa M; Weisgram, Erica S; Fulcher, Megan

2017-07-01

Children's toy play is at the foundation of child development. However, gender differentiation in early play experiences may result in gender differences in cognitive abilities, social interactions, and vocational choices. We investigated gender-typing of toys and toys' propulsive properties (e.g., wheels, forward motion) as possible factors impacting children's toy interests, perceptions of other children's interests, and children's actual toy choices during free play. In Studies 1 and 2, 82 preschool children (42 boys, 40 girls; mean age = 4.90 years) were asked to report their interest and perceptions of other children's interests in toys. In Study 1, masculine, feminine, and neutral toys with and without propulsive properties were presented. Children reported greater interest in gender-typed toys and neutral toys compared to cross-gender-typed toys. In Study 2, unfamiliar, neutral toys with and without propulsive properties were presented. Propulsive properties did not affect children's interest across both studies. Study 3 was an observational study that assessed toy preferences among 42 preschool children (21 males, 21 females, mean age = 4.49 years) during a play session with masculine, feminine, and neutral toys with and without propulsive properties. Gender-typed toy preferences were less apparent than expected, with children showing high interest in neutral toys, and girls playing with a wide variety of masculine, feminine, and neutral toys. Gender differences in interest for toys with propulsion properties were not evident. Overall, gender differences in children's interest in toys as a function of propulsion properties were not found in the three experiments within this study.

Transmission of supersymmetry breaking from a four-dimensional boundary

International Nuclear Information System (INIS)

Mirabelli, E.A.; Peskin, M.E.

1998-01-01

In the strong-coupling limit of the heterotic string theory constructed by Horava and Witten, an 11-dimensional supergravity theory is coupled to matter multiplets confined to 10-dimensional mirror planes. This structure suggests that realistic unification models are obtained, after compactification of 6 dimensions, as theories of 5-dimensional supergravity in an interval, coupling to matter fields on 4-dimensional walls. Supersymmetry breaking may be communicated from one boundary to another by the 5-dimensional fields. In this paper, we study a toy model of this communication in which 5-dimensional super-Yang-Mills theory in the bulk couples to chiral multiplets on the walls. Using the auxiliary fields of the Yang-Mills multiplet, we find a simple algorithm for coupling the bulk and boundary fields. We demonstrate two different mechanisms for generating soft supersymmetry breaking terms in the boundary theory. We also compute the Casimir energy generated by supersymmetry breaking. copyright 1998 The American Physical Society

A new computationally-efficient two-dimensional model for boron implantation into single-crystal silicon

International Nuclear Information System (INIS)

Klein, K.M.; Park, C.; Yang, S.; Morris, S.; Do, V.; Tasch, F.

1992-01-01

We have developed a new computationally-efficient two-dimensional model for boron implantation into single-crystal silicon. This paper reports that this new model is based on the dual Pearson semi-empirical implant depth profile model and the UT-MARLOWE Monte Carlo boron ion implantation model. This new model can predict with very high computational efficiency two-dimensional as-implanted boron profiles as a function of energy, dose, tilt angle, rotation angle, masking edge orientation, and masking edge thickness

A two-dimensional, two-phase mass transport model for liquid-feed DMFCs

International Nuclear Information System (INIS)

Yang, W.W.; Zhao, T.S.

2007-01-01

A two-dimensional, isothermal two-phase mass transport model for a liquid-feed direct methanol fuel cell (DMFC) is presented in this paper. The two-phase mass transport in the anode and cathode porous regions is formulated based on the classical multiphase flow in porous media without invoking the assumption of constant gas pressure in the unsaturated porous medium flow theory. The two-phase flow behavior in the anode flow channel is modeled by utilizing the drift-flux model, while in the cathode flow channel the homogeneous mist-flow model is used. In addition, a micro-agglomerate model is developed for the cathode catalyst layer. The model also accounts for the effects of both methanol and water crossover through the membrane. The comprehensive model formed by integrating those in the different regions is solved numerically using a home-written computer code and validated against the experimental data in the literature. The model is then used to investigate the effects of various operating and structural parameters, such as methanol concentration, anode flow rate, porosities of both anode and cathode electrodes, the rate of methanol crossover, and the agglomerate size, on cell performance

(2 + 1)-dimensional interacting model of two massless spin-2 fields as a bi-gravity model

Science.gov (United States)

Hoseinzadeh, S.; Rezaei-Aghdam, A.

2018-06-01

We propose a new group-theoretical (Chern-Simons) formulation for the bi-metric theory of gravity in (2 + 1)-dimensional spacetime which describe two interacting massless spin-2 fields. Our model has been formulated in terms of two dreibeins rather than two metrics. We obtain our Chern-Simons gravity model by gauging mixed AdS-AdS Lie algebra and show that it has a two dimensional conformal field theory (CFT) at the boundary of the anti de Sitter (AdS) solution. We show that the central charge of the dual CFT is proportional to the mass of the AdS solution. We also study cosmological implications of our massless bi-gravity model.

Modern Toys: Risks and Dangers (Materials from the Workshop at the MSUPE Center for Play and Toys

Directory of Open Access Journals (Sweden)

Smirnova E.O.,

2016-07-01

Full Text Available The article presents the seminar which is based on the “harmful” toys. This seminar was organized in the Centre of games and toys in MSUPE. The theme of the seminar is linked with the requirements of the public and parental controls to restrict the production and sale of these toys which can harm the mental health and the development of children. The discussion was attended by the leading child psychiatrists, psychotherapists and psychologists. They discussed the issues that were associated with the risks and hazards from the toys, and the possibility of studying the potential harmful effects of toys. All participants of this discussion were agree with this fact, that a toy itself cannot harm a mental health, while at the same time, a toy (along with cartoons, multimedia, games and so on. takes part in the formation of certain needs and views of children. This workshop demonstrated the complexity of the problem and the necessity for its further development.

Stochastic quantum gravity-(2+1)-dimensional case

International Nuclear Information System (INIS)

Hosoya, Akio

1991-01-01

At first the amazing coincidences are pointed out in quantum field theory in curved space-time and quantum gravity, when they exhibit stochasticity. To explore the origin of them, the (2+1)-dimensional quantum gravity is considered as a toy model. It is shown that the torus universe in the (2+1)-dimensional quantum gravity is a quantum chaos in a rigorous sense. (author). 15 refs

Character Toys as Psychological Tools

Science.gov (United States)

Smirnova, Elena O.

2011-01-01

The main characteristic of children's play is its mental aspect--the fact that it is based on thoughts and feelings and not on objective reality. During imaginary play, children go beyond the limits of reality, and toys are tools that help them to do this. Children need character toys--toys that play the role of companion or partner--in the early…

Three-Dimensional Computer-Assisted Two-Layer Elastic Models of the Face.

Science.gov (United States)

Ueda, Koichi; Shigemura, Yuka; Otsuki, Yuki; Fuse, Asuka; Mitsuno, Daisuke

2017-11-01

To make three-dimensional computer-assisted elastic models for the face, we decided on five requirements: (1) an elastic texture like skin and subcutaneous tissue; (2) the ability to take pen marking for incisions; (3) the ability to be cut with a surgical knife; (4) the ability to keep stitches in place for a long time; and (5) a layered structure. After testing many elastic solvents, we have made realistic three-dimensional computer-assisted two-layer elastic models of the face and cleft lip from the computed tomographic and magnetic resonance imaging stereolithographic data. The surface layer is made of polyurethane and the inner layer is silicone. Using this elastic model, we taught residents and young doctors how to make several typical local flaps and to perform cheiloplasty. They could experience realistic simulated surgery and understand three-dimensional movement of the flaps.

The one loop calculation of the strong coupling β function in the Toy Model

International Nuclear Information System (INIS)

Bai Zhiming; Jiang Yuanfang

1991-01-01

The background field quantization is used to calculate the one-loop β function in the Toy Model which has the strong coupling and the SU(3) symmetry. The function obtained is consistent with the Appalquist-Carrazone theorem in the low energy condition

On Regularity Criteria for the Two-Dimensional Generalized Liquid Crystal Model

Directory of Open Access Journals (Sweden)

Yanan Wang

2014-01-01

Full Text Available We establish the regularity criteria for the two-dimensional generalized liquid crystal model. It turns out that the global existence results satisfy our regularity criteria naturally.

Interacting-fermion approximation in the two-dimensional ANNNI model

International Nuclear Information System (INIS)

Grynberg, M.D.; Ceva, H.

1990-12-01

We investigate the effect of including domain-walls interactions in the two-dimensional axial next-nearest-neighbor Ising or ANNNI model. At low temperatures this problem is reduced to a one-dimensional system of interacting fermions which can be treated exactly. It is found that the critical boundaries of the low-temperature phases are in good agreement with those obtained using a free-fermion approximation. In contrast with the monotonic behavior derived from the free-fermion approach, the wall density or wave number displays reentrant phenomena when the ratio of the next-nearest-neighbor and nearest-neighbor interactions is greater than one-half. (author). 17 refs, 2 figs

Investigation of toy phenomenon in western psychology

Directory of Open Access Journals (Sweden)

Smirnova E.O.

2012-12-01

Full Text Available The article reviews the latest foreign psychological studies of toys. It presents the thematic variety of these studies and also different levels of analysis of the problem in the question. In terms of socio-cultural approach to toy it is regarded as a text, as a secondary artifact presenting real objects and tools. Some articles in this review are devoted to the problem of choosing toys in conditions of a contemporary market-oriented society. Some articles in this review, analyzing the historical background of toys, compare those of a past age with present time toys. In some studies the role of certain kinds of toys (like construction kits or doll's houses in child's life is discussed. The review also presents children's gender preferences in choice of toys.

Superconductivity of the two-dimensional Penson-Kolb model

International Nuclear Information System (INIS)

Czart, W.R.; Robaszkiewicz, S.

2001-01-01

Two-dimensional (d = 2) Penson-Kolb model, i.e. the tight-binding model with the pair-hopping (intersite charge exchange) interaction, is considered and the effects of phase fluctuations on the s-wave superconductivity of this system are discussed within Kosterlitz-Thouless scenario. The London penetration depth λ at T = 0, the Kosterlitz Thouless critical temperature T c , and the Hartree-Fock approximation critical temperature T p are determined as a function of particle concentration and interaction. The Uemura type plots (T c vs. λ -2 (0)) are derived. Beyond weak coupling and for low concentrations they show the existence of universal scaling: T c ∼ 1/λ 2 (0), as it previously found for the attractive Hubbard model and for the models intersite electron pairing. (author)

Quantum Big Bang without fine-tuning in a toy-model

International Nuclear Information System (INIS)

Znojil, Miloslav

2012-01-01

The question of possible physics before Big Bang (or after Big Crunch) is addressed via a schematic non-covariant simulation of the loss of observability of the Universe. Our model is drastically simplified by the reduction of its degrees of freedom to the mere finite number. The Hilbert space of states is then allowed time-dependent and singular at the critical time t = t c . This option circumvents several traditional theoretical difficulties in a way illustrated via solvable examples. In particular, the unitary evolution of our toy-model quantum Universe is shown interruptible, without any fine-tuning, at the instant of its bang or collapse t = t c .

Quantum Big Bang without fine-tuning in a toy-model

Science.gov (United States)

Znojil, Miloslav

2012-02-01

The question of possible physics before Big Bang (or after Big Crunch) is addressed via a schematic non-covariant simulation of the loss of observability of the Universe. Our model is drastically simplified by the reduction of its degrees of freedom to the mere finite number. The Hilbert space of states is then allowed time-dependent and singular at the critical time t = tc. This option circumvents several traditional theoretical difficulties in a way illustrated via solvable examples. In particular, the unitary evolution of our toy-model quantum Universe is shown interruptible, without any fine-tuning, at the instant of its bang or collapse t = tc.

77 FR 37834 - Revocation of Certain Requirements Pertaining to Caps Intended for Use With Toy Guns and Toy Guns...

Science.gov (United States)

2012-06-25

... Certain Requirements Pertaining to Caps Intended for Use With Toy Guns and Toy Guns Not Intended for Use With Caps AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking. SUMMARY... compliance than our existing regulations pertaining to caps intended for use with toy guns and toy guns not...

A two-dimensional analytical model of laminar flame in lycopodium dust particles

Energy Technology Data Exchange (ETDEWEB)

Rahbari, Alireza [Shahid Rajaee Teacher Training University, Tehran (Iran, Islamic Republic of); Shakibi, Ashkan [Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Bidabadi, Mehdi [Combustion Research Laboratory, Narmak, Tehran (Iran, Islamic Republic of)

2015-09-15

A two-dimensional analytical model is presented to determine the flame speed and temperature distribution of micro-sized lycopodium dust particles. This model is based on the assumptions that the particle burning rate in the flame front is controlled by the process of oxygen diffusion and the flame structure consists of preheat, reaction and post flame zones. In the first step, the energy conservation equations for fuel-lean condition are expressed in two dimensions, and then these differential equations are solved using the required boundary condition and matching the temperature and heat flux at the interfacial boundaries. Consequently, the obtained flame temperature and flame speed distributions in terms of different particle diameters and equivalence ratio for lean mixture are compared with the corresponding experimental data for lycopodium dust particles. Consequently, it is shown that this two-dimensional model demonstrates better agreement with the experimental results compared to the previous models.

A two-dimensional analytical model of laminar flame in lycopodium dust particles

International Nuclear Information System (INIS)

Rahbari, Alireza; Shakibi, Ashkan; Bidabadi, Mehdi

2015-01-01

A two-dimensional analytical model is presented to determine the flame speed and temperature distribution of micro-sized lycopodium dust particles. This model is based on the assumptions that the particle burning rate in the flame front is controlled by the process of oxygen diffusion and the flame structure consists of preheat, reaction and post flame zones. In the first step, the energy conservation equations for fuel-lean condition are expressed in two dimensions, and then these differential equations are solved using the required boundary condition and matching the temperature and heat flux at the interfacial boundaries. Consequently, the obtained flame temperature and flame speed distributions in terms of different particle diameters and equivalence ratio for lean mixture are compared with the corresponding experimental data for lycopodium dust particles. Consequently, it is shown that this two-dimensional model demonstrates better agreement with the experimental results compared to the previous models.

[Audit "Toys and incubators in neonatology"].

Science.gov (United States)

Raginel, T; Bigoin-Dupont, M; Aguelon, V; Fines-Guyon, M; Guillemin, M G

2009-08-01

Owing to an increase in nosocomial septicaemias in the Neonatalogy department, we've judged it necessary to consider the role of items not linked to the nursing procedures, and nevertheless present in the incubators, as well as the hygiene techniques applied to them. In November 2007, we've made a longitudinal prospective study consisting in an observation audit during 3 successive days, observing every single incubator with a newborn baby. In each incubator, we've checked whether there were or not items that weren't required by the nursing activities, along with their characteristics and the hygiene procedures applied to them. We've inquired as well whether the parents and the nursing staff knew and applied the required hygiene procedures. In 13 among the 17 incubators under survey, at least one item not strictly required by the nursing procedures could be found. The number of toys in each incubator varied from seven to one. Among the 33 toys surveyed, 24 (73%) of them showed a score of maximum fluffiness (4 out of 4), and only 10 wore labels giving cleansing advice from the manufacturers. Without any record about the cleaning/disinfecting of the toys brought in hospital, we have observed that the parents were given varied advice about how to clean the toys at home before putting them in the incubators (only four parents had washed the toys in their washing machines at more than 30 degrees C). From the six samples under scrutiny, all the culture results were tested positive. In particular two of the soft toys sampled were found infected by a Pseudomonas oryzihabitans. These particular toys belonged to a baby who had been diagnosed with a septicaemia characterized by hemocultures positive to a P. oryzihabitans of a different strain. Our audit has been an efficient reminder that any item put in an incubator is a potential vector and reservoir of pathogen organisms. After a general feedback towards the department staff, the medical staff then prescribed to

History of European and national toys

OpenAIRE

Smirnova E.O.; Sokolova M.V.

2016-01-01

The article examines the role of toys in the life and development of children. It traces the developmental trajectory of shaped toys in Europe and Russia from antiquity to the present day. It also shows the role of ideological factors in shaping the image of toys as well as long lasting contradiction between the developing features of toys and their market values. The article presents the comparative analysis of the image and the playing potential of the traditional and modern popular dolls. ...

Serious Fun: Using Toys to Demonstrate Fluid Mechanics Principles

Science.gov (United States)

Saviz, Camilla M.; Shakerin, Said

2014-01-01

Many students have owned or seen fluids toys in which two immiscible fluids within a closed container can be tilted to generate waves. These types of inexpensive and readily available toys are fun to play with, but they are also useful for provoking student learning about fluid properties or complex fluid behavior, including drop formation and…

Two-dimensional sigma models: modelling non-perturbative effects of gauge theories

International Nuclear Information System (INIS)

Novikov, V.A.; Shifman, M.A.; Vainshtein, A.I.; Zakharov, V.I.

1984-01-01

The review is devoted to a discussion of non-perturbative effects in gauge theories and two-dimensional sigma models. The main emphasis is put on supersymmetric 0(3) sigma model. The instanton-based method for calculating the exact Gell-Mann-Low function and bifermionic condensate is considered in detail. All aspects of the method in simplifying conditions are discussed. The basic points are: the instanton measure from purely classical analysis; a non-renormalization theorem in self-dual external fields; existence of vacuum condensates and their compatibility with supersymmetry

Determination of two dimensional axisymmetric finite element model for reactor coolant piping nozzles

International Nuclear Information System (INIS)

Choi, S. N.; Kim, H. N.; Jang, K. S.; Kim, H. J.

2000-01-01

The purpose of this paper is to determine a two dimensional axisymmetric model through a comparative study between a three dimensional and an axisymmetric finite element analysis of the reactor coolant piping nozzle subject to internal pressure. The finite element analysis results show that the stress adopting the axisymmetric model with the radius of equivalent spherical vessel are well agree with that adopting the three dimensional model. The radii of equivalent spherical vessel are 3.5 times and 7.3 times of the radius of the reactor coolant piping for the safety injection nozzle and for the residual heat removal nozzle, respectively

A Model for the Two-dimensional no Isolated Bits Constraint

DEFF Research Database (Denmark)

Forchhammer, Søren; Laursen, Torben Vaarby

2006-01-01

A stationary model is presented for the two-dimensional (2-D) no isolated bits (n.i.b.) constraint over an extended alphabet defined by the elements within 1 by 2 blocks. This block-wise model is based on a set of sufficient conditions for a Pickard random field (PRF) over an m-ary alphabet....... Iterative techniques are applied as part of determining the model parameters. Given two Markov chains describing a boundary, an algorithm is presented which determines whether a certain PRF consistent with the boundary exists. Iterative scaling is used as part of the algorithm, which also determines...

N = 2 two dimensional Wess-Zumino model on the lattice

International Nuclear Information System (INIS)

Elitzur, S.; Schwimmer, A.

1983-04-01

A lattice version of the N = 2 SUSY two dimensional Wess-Zumino model was constructed and studied. The correct continuum limit is checked in perturbation theory. The strong coupling limit is defined and investigated. We find that the ground state of the model has zero energy and infinite degeneracy. The connection between this degeneracy and the properties of the Nicolai-Parisi-Sourlas transformation is discussed. (author)

Rheological properties of the soft-disk model of two-dimensional foams

DEFF Research Database (Denmark)

Langlois, Vincent; Hutzler, Stefan; Weaire, Denis

2008-01-01

The soft-disk model previously developed and applied by Durian [D. J. Durian, Phys. Rev. Lett. 75, 4780 (1995)] is brought to bear on problems of foam rheology of longstanding and current interest, using two-dimensional systems. The questions at issue include the origin of the Herschel-Bulkley re......The soft-disk model previously developed and applied by Durian [D. J. Durian, Phys. Rev. Lett. 75, 4780 (1995)] is brought to bear on problems of foam rheology of longstanding and current interest, using two-dimensional systems. The questions at issue include the origin of the Herschel......-Bulkley relation, normal stress effects (dilatancy), and localization in the presence of wall drag. We show that even a model that incorporates only linear viscous effects at the local level gives rise to nonlinear (power-law) dependence of the limit stress on strain rate. With wall drag, shear localization...

Quantifying infant physical interactions using sensorized toys in a natural play environment.

Science.gov (United States)

Goyal, Vatsala; Torres, Wilson; Rai, Roshan; Shofer, Frances; Bogen, Daniel; Bryant, Phillip; Prosser, Laura; Johnson, Michelle J

2017-07-01

Infants with developmental delays must be detected early in their development to minimize the progression of motor and neurological impairments. Our objective is to quantify how sensorized toys in a natural play environment can promote infant-toy physical interactions. We created a hanging elephant toy, equipped with an inertial measurement unit (IMU), a pressure transducer, and multiple feedback sensors, to be a hand-grasping toy. We used a 3 DoF robotic model with inputs from the IMU to calculate multiple kinematic metrics and an equation to calculate haptic metrics from the pressure transducer. Six typical infants were tested in the gym set-up. Three infants interacted with the toy for more than half the trial time. The youngest infant exhibited the largest toy displacement with ΔD = 27.6 cm, while the oldest infant squeezed the toy with the largest mean pressure of 4.5 kPa. More data on on both typical and atypical infants needs to be collected. After testing atypical infants in the SmarToyGym set-up, we will be able to identify interaction metrics that differentiate atypical and typical infants.

Phthalates in toys available in Indian market.

Science.gov (United States)

Johnson, Sapna; Saikia, Nirmali; Sahu, Ramakant

2011-06-01

Twenty four children's toys and child care articles available in the local market of India were analyzed for eight phthalates as children toys are plasticized with phthalates. All toy samples showed the presence of one or more phthalates including di-(2-ethylhexyl) phthalate (96% of the samples), di-iso-nonyl phthalate and di-iso-decyl phthalate (42% of the samples) at a concentration ranging from 0.1% to 16.2%. Soft toys contain higher levels of phthalates as compared to hard toys as primary function of phthalates is softening of hard plastic materiel.

A two-dimensional model with three regions for the reflooding study

International Nuclear Information System (INIS)

Motta, A.M.T.; Kinrys, S.; Roberty, N.C.; Carmo, E.G.D. do; Oliveira, L.F.S. de

1982-01-01

A two-dimensional semi-analytical model, with three heat transfer regions is described for the calculation of flood ratio, the length of quenching front and the temperature distribution in the cladding. (E.G.) [pt

A two-dimensional model with three regions for the reflooding study

International Nuclear Information System (INIS)

Motta, A.M.T.; Kinrys, S.; Roberty, N.C.; Carmo, E.G.D. do; Oliveira, L.F.S. de.

1983-02-01

A two-dimensional semi-analytical model, with three heat transfer regions is described for the calculation of flood ratio, the lenght of quenching front and the temperature distribution in the cladding. (E.G.) [pt

Novel target design algorithm for two-dimensional optical storage (TwoDOS)

NARCIS (Netherlands)

Huang, Li; Chong, T.C.; Vijaya Kumar, B.V.K.; Kobori, H.

2004-01-01

In this paper we introduce the Hankel transform based channel model of Two-Dimensional Optical Storage (TwoDOS) system. Based on this model, the two-dimensional (2D) minimum mean-square error (MMSE) equalizer has been derived and applied to some simple but common cases. The performance of the 2D

Quantization of coset space σ-models coupled to two-dimensional gravity

International Nuclear Information System (INIS)

Korotkin, D.; Samtleben, H.

1996-07-01

The mathematical framework for an exact quantization of the two-dimensional coset space σ-models coupled to dilaton gravity, that arise from dimensional reduction of gravity and supergravity theories, is presented. The two-time Hamiltonian formulation is obtained, which describes the complete phase space of the model in the whole isomonodromic sector. The Dirac brackets arising from the coset constraints are calculated. Their quantization allows to relate exact solutions of the corresponding Wheeler-DeWitt equations to solutions of a modified (Coset) Knizhnik-Zamolodchikov system. On the classical level, a set of observables is identified, that is complete for essential sectors of the theory. Quantum counterparts of these observables and their algebraic structure are investigated. Their status in alternative quantization procedures is discussed, employing the link with Hamiltonian Chern-Simons theory. (orig.)

Dynamics of the two-dimensional directed Ising model in the paramagnetic phase

Science.gov (United States)

Godrèche, C.; Pleimling, M.

2014-05-01

We consider the nonconserved dynamics of the Ising model on the two-dimensional square lattice, where each spin is influenced preferentially by its east and north neighbours. The single-spin flip rates are such that the stationary state is Gibbsian with respect to the usual ferromagnetic Ising Hamiltonian. We show the existence, in the paramagnetic phase, of a dynamical transition between two regimes of violation of the fluctuation-dissipation theorem in the nonequilibrium stationary state: a regime of weak violation where the stationary fluctuation-dissipation ratio is finite, when the asymmetry parameter is less than a threshold value, and a regime of strong violation where this ratio vanishes asymptotically above the threshold. This study suggests that this novel kind of dynamical transition in nonequilibrium stationary states, already found for the directed Ising chain and the spherical model with asymmetric dynamics, might be quite general. In contrast with the latter models, the equal-time correlation function for the two-dimensional directed Ising model depends on the asymmetry.

An incompressible two-dimensional multiphase particle-in-cell model for dense particle flows

Energy Technology Data Exchange (ETDEWEB)

Snider, D.M. [SAIC, Albuquerque, NM (United States); O`Rourke, P.J. [Los Alamos National Lab., NM (United States); Andrews, M.J. [Texas A and M Univ., College Station, TX (United States). Dept. of Mechanical Engineering

1997-06-01

A two-dimensional, incompressible, multiphase particle-in-cell (MP-PIC) method is presented for dense particle flows. The numerical technique solves the governing equations of the fluid phase using a continuum model and those of the particle phase using a Lagrangian model. Difficulties associated with calculating interparticle interactions for dense particle flows with volume fractions above 5% have been eliminated by mapping particle properties to a Eulerian grid and then mapping back computed stress tensors to particle positions. This approach utilizes the best of Eulerian/Eulerian continuum models and Eulerian/Lagrangian discrete models. The solution scheme allows for distributions of types, sizes, and density of particles, with no numerical diffusion from the Lagrangian particle calculations. The computational method is implicit with respect to pressure, velocity, and volume fraction in the continuum solution thus avoiding courant limits on computational time advancement. MP-PIC simulations are compared with one-dimensional problems that have analytical solutions and with two-dimensional problems for which there are experimental data.

Pairing in a two-dimensional two-band very anisotropic model in the mean field approximation

International Nuclear Information System (INIS)

Fazakas, A.B.; Pitis, R.

1993-09-01

A two-dimensional model is proposed: there are two kinds of sites, with one electronic state per site; tunneling takes place only in one direction; the interaction involves only electrons on different sites. The existence of a phase transition involving interband pairing of electrons is discussed in the mean field approximation. (author)

Modeling of the financial market using the two-dimensional anisotropic Ising model

Science.gov (United States)

Lima, L. S.

2017-09-01

We have used the two-dimensional classical anisotropic Ising model in an external field and with an ion single anisotropy term as a mathematical model for the price dynamics of the financial market. The model presented allows us to test within the same framework the comparative explanatory power of rational agents versus irrational agents with respect to the facts of financial markets. We have obtained the mean price in terms of the strong of the site anisotropy term Δ which reinforces the sensitivity of the agent's sentiment to external news.

Children's Gender-Based Reasoning about Toys.

Science.gov (United States)

Martin, Carol Lynn; And Others

1995-01-01

Three studies examined how preschool children used gender-based reasoning in making judgments about toy preferences for themselves and for others. Found that children used gender labels to guide their own preferences and their expectations of others. Even with very attractive toys, children liked the toys less if they were labeled as being for the…

The theory of critical phenomena in two-dimensional systems

International Nuclear Information System (INIS)

Olvera de la C, M.

1981-01-01

An exposition of the theory of critical phenomena in two-dimensional physical systems is presented. The first six chapters deal with the mean field theory of critical phenomena, scale invariance of the thermodynamic functions, Kadanoff's spin block construction, Wilson's renormalization group treatment of critical phenomena in configuration space, and the two-dimensional Ising model on a triangular lattice. The second part of this work is made of four chapters devoted to the application of the ideas expounded in the first part to the discussion of critical phenomena in superfluid films, two-dimensional crystals and the two-dimensional XY model of magnetic systems. Chapters seven to ten are devoted to the following subjects: analysis of long range order in one, two, and three-dimensional physical systems. Topological defects in the XY model, in superfluid films and in two-dimensional crystals. The Thouless-Kosterlitz iterated mean field theory of the dipole gas. The renormalization group treatment of the XY model, superfluid films and two-dimensional crystal. (author)

Chiral anomaly, fermionic determinant and two dimensional models

International Nuclear Information System (INIS)

Rego Monteiro, M.A. do.

1985-01-01

The chiral anomaly in random pair dimension is analysed. This anomaly is perturbatively calculated by dimensional regularization method. A new method for non-perturbative Jacobian calculation of a general chiral transformation, 1.e., finite and non-Abelian, is developed. This method is used for non-perturbative chiral anomaly calculation, as an alternative to bosonization of two-dimensional theories for massless fermions and to study the phenomenum of fermion number fractionalization. The fermionic determinant from two-dimensional quantum chromodynamics is also studied, and calculated, exactly, as in decoupling gauge as with out reference to a particular gauge. (M.C.K.) [pt

Towards the graviton from spinfoams: the 3d toy model

International Nuclear Information System (INIS)

Speziale, Simone

2006-01-01

Recently, a proposal has appeared for the extraction of the 2-point function of linearised quantum gravity, within the spinfoam formalism. This relies on the use of a boundary state, which introduces a semi-classical flat geometry on the boundary. In this paper, we investigate this proposal considering a toy model in the (Riemannian) 3d case, where the semi-classical limit is better understood. We show that in this limit the propagation kernel of the model is the one for the harmonic oscillator. This is at the origin of the expected 1/l behaviour of the 2-point function. Furthermore, we numerically study the short scales regime, where deviations from this behaviour occur

Minimal quantization of two-dimensional models with chiral anomalies

International Nuclear Information System (INIS)

Ilieva, N.

1987-01-01

Two-dimensional gauge models with chiral anomalies - ''left-handed'' QED and the chiral Schwinger model, are quantized consistently in the frames of the minimal quantization method. The choice of the cone time as a physical time for system of quantization is motivated. The well-known mass spectrum is found but with a fixed value of the regularization parameter a=2. Such a unique solution is obtained due to the strong requirement of consistency of the minimal quantization that reflects in the physically motivated choice of the time axis

Advertising Violent Toys in Weekly Circulars of Popular Retailers in the United States

Science.gov (United States)

Basch, Corey H.; Guerra, Laura A.; Reeves, Rachel; Basch, Charles E.

2015-01-01

Background: Violence is a pervasive problem in the United States. Toys, far from trivial playthings, are a reflection of society, including its beliefs and values. The purpose of this study was to describe the extent to which violent toys are marketed in online weekly flyers of popular retailers, how the violence is manifested, and whether violent toys are marketed differentially to boys and girls. Methods: For this cross-sectional observational study, online circulars from 5 major retailers were downloaded and examined each week for 14 weeks during the fall of 2014. For each retailer, the total number of toys, as well as the total number of violent and non-violent toys, was recorded. In addition, each violent toy was categorized into one of five groups: picturing a figure with a weapon, a figure with intent to strike (with fists drawn or an angry face), a toy with a violent name, a toy that was a weapon itself, or a set of toys that included two or more of these criteria. Results: A total number of 3,459 toys were observed, of which 1,053 (30%) were deemed violent. Of the violent toys, 95% were marketed to boys (n=1,003) versus 5% to girls (n=50). The most prevalent violent category was a figure with a weapon such as a sword, knife or gun (29%), followed by figures with fists out and aggressive faces (26%). Conclusion: Parents should be mindful of toy retailer‟s marketing of violent toys, especially toward boys, and the potential for those toys to de-sensitize their children to violence PMID:26634197

Safety of light emitting diodes in toys.

Science.gov (United States)

Higlett, M P; O'Hagan, J B; Khazova, M

2012-03-01

Light emitting diodes (LEDs) are increasingly being used in toys. An assessment methodology is described for determining the accessible emission limits for the optical radiation from the toys, which takes account of expected use and reasonably foreseeable misuse of toys. Where data are available, it may be possible to assess the toy from the data sheet alone. If this information is not available, a simple measurement protocol is proposed.

Safety of light emitting diodes in toys

International Nuclear Information System (INIS)

Higlett, M P; O'Hagan, J B; Khazova, M

2012-01-01

Light emitting diodes (LEDs) are increasingly being used in toys. An assessment methodology is described for determining the accessible emission limits for the optical radiation from the toys, which takes account of expected use and reasonably foreseeable misuse of toys. Where data are available, it may be possible to assess the toy from the data sheet alone. If this information is not available, a simple measurement protocol is proposed.

A simple non-equilibrium, statistical-physics toy model of thin-film growth

International Nuclear Information System (INIS)

Ochab, Jeremi K; Nagel, Hannes; Janke, Wolfhard; Waclaw, Bartlomiej

2015-01-01

We present a simple non-equilibrium model of mass condensation with Lennard–Jones interactions between particles and the substrate. We show that when some number of particles is deposited onto the surface and the system is left to equilibrate, particles condense into an island if the density of particles becomes higher than some critical density. We illustrate this with numerically obtained phase diagrams for three-dimensional systems. We also solve a two-dimensional counterpart of this model analytically and show that not only the phase diagram but also the shape of the cross-sections of three-dimensional condensates qualitatively matches the two-dimensional predictions. Lastly, we show that when particles are being deposited with a constant rate, the system has two phases: a single condensate for low deposition rates, and multiple condensates for fast deposition. The behaviour of our model is thus similar to that of thin film growth processes, and in particular to Stranski–Krastanov growth. (paper)

Basic problems solving for two-dimensional discrete 3 × 4 order hidden markov model

International Nuclear Information System (INIS)

Wang, Guo-gang; Gan, Zong-liang; Tang, Gui-jin; Cui, Zi-guan; Zhu, Xiu-chang

2016-01-01

A novel model is proposed to overcome the shortages of the classical hypothesis of the two-dimensional discrete hidden Markov model. In the proposed model, the state transition probability depends on not only immediate horizontal and vertical states but also on immediate diagonal state, and the observation symbol probability depends on not only current state but also on immediate horizontal, vertical and diagonal states. This paper defines the structure of the model, and studies the three basic problems of the model, including probability calculation, path backtracking and parameters estimation. By exploiting the idea that the sequences of states on rows or columns of the model can be seen as states of a one-dimensional discrete 1 × 2 order hidden Markov model, several algorithms solving the three questions are theoretically derived. Simulation results further demonstrate the performance of the algorithms. Compared with the two-dimensional discrete hidden Markov model, there are more statistical characteristics in the structure of the proposed model, therefore the proposed model theoretically can more accurately describe some practical problems.

Is zero-point energy physical? A toy model for Casimir-like effect

International Nuclear Information System (INIS)

Nikolić, Hrvoje

2017-01-01

Zero-point energy is generally known to be unphysical. Casimir effect, however, is often presented as a counterexample, giving rise to a conceptual confusion. To resolve the confusion we study foundational aspects of Casimir effect at a qualitative level, but also at a quantitative level within a simple toy model with only 3 degrees of freedom. In particular, we point out that Casimir vacuum is not a state without photons, and not a ground state for a Hamiltonian that can describe Casimir force. Instead, Casimir vacuum can be related to the photon vacuum by a non-trivial Bogoliubov transformation, and it is a ground state only for an effective Hamiltonian describing Casimir plates at a fixed distance. At the fundamental microscopic level, Casimir force is best viewed as a manifestation of van der Waals forces. - Highlights: • A toy model for Casimir-like effect with only 3 degrees of freedom is constructed. • Casimir vacuum can be related to the photon vacuum by a non-trivial Bogoliubov transformation. • Casimir vacuum is a ground state only for an effective Hamiltonian describing Casimir plates at a fixed distance. • At the fundamental microscopic level, Casimir force is best viewed as a manifestation of van der Waals forces.

Embedding Sensory Preference into Toys to Enhance Toy Play in Toddlers with Disabilities

Science.gov (United States)

DiCarlo, Cynthia F.; Schepis, Maureen M.; Flynn, Linda

2009-01-01

Playing with toys as a means of environmental engagement has long been considered important in early child development (D. J. Messer, D. Rachford, M. E. McCarthy, & L. J. Yarrow, 1987; M. Wolery, M. G. Werts, & M. Holcombe, 1994). However, children with highly significant disabilities often engage in toy play less frequently than their peers…

NUMERICAL SIMULATION OF FLOW OVER TWO-DIMENSIONAL MOUNTAIN RIDGE USING SIMPLE ISENTROPIC MODEL

Directory of Open Access Journals (Sweden)

Siswanto Siswanto

2009-07-01

Full Text Available Model sederhana isentropis telah diaplikasikan untuk mengidentifikasi perilaku aliran masa udara melewati topografi sebuah gunung. Dalam model isentropis, temperature potensial θ digunakan sebagai koordinat vertikal dalam rezim aliran adiabatis. Medan angin dalam arah vertikal dihilangkan dalam koordinat isentropis sehingga mereduksi sistim tiga dimensi menjadi sistim dua dimensi lapisan θ. Skema komputasi beda hingga tengah telah digunakan untuk memformulasikan model adveksi. Paper ini membahas aplikasi sederhana dari model isentropis untuk mempelajari gelombang gravitasi dan fenomena angin gunung  dengan desain komputasi periodik dan kondisi batas lateral serta simulasi dengan topografi yang berbeda.   The aim of this work is to study turbulent flow over two-dimensional hill using a simple isentropic model. The isentropic model is represented by applying the potential temperature θ, as the vertical coordinate and is conversed in adiabatic flow regimes. This implies a vanishing vertical wind in isentropic coordinates which reduces the three dimensional system to a stack of two dimensional θ–layers. The equations for each isentropic layer are formally identical with the shallow water equation. A computational scheme of centered finite differences is used to formulate an advective model. This work reviews a simple isentropic model application to investigate gravity wave and mountain wave phenomena regard to different experimental design of computation and topographic height.

A toy story: Association between young children's knowledge of fast food toy premiums and their fast food consumption.

Science.gov (United States)

Longacre, Meghan R; Drake, Keith M; Titus, Linda J; Cleveland, Lauren P; Langeloh, Gail; Hendricks, Kristy; Dalton, Madeline A

2016-01-01

Fast food restaurants spend millions of dollars annually on child-targeted marketing, a substantial portion of which is allocated to toy premiums for kids' meals. The objectives of this study were to describe fast food toy premiums, and examine whether young children's knowledge of fast food toy premiums was associated with their fast food consumption. Parents of 3- to 5-year old children were recruited from pediatric and WIC clinics in Southern New Hampshire, and completed a cross-sectional survey between April 2013-March 2014. Parents reported whether their children usually knew what toys were being offered at fast food restaurants, and whether children had eaten at any of four restaurants that offer toy premiums with kids' meals (McDonald's, Burger King, Subway, Wendy's) during the 7 days preceding the survey. Seventy-one percent of eligible parents participated (N = 583); 48.4% did not receive any education beyond high school, and 27.1% of children were non-white. Half (49.7%) the children had eaten at one or more of the four fast food restaurants in the past week; one-third (33.9%) had eaten at McDonald's. The four restaurants released 49 unique toy premiums during the survey period; McDonald's released half of these. Even after controlling for parent fast food consumption and sociodemographics, children were 1.38 (95% CI = 1.04, 1.82) times more likely to have consumed McDonald's if they usually knew what toys were offered by fast food restaurants. We did not detect a relationship between children's toy knowledge and their intake of fast food from the other restaurants. In this community-based sample, young children's knowledge of fast food toys was associated with a greater frequency of eating at McDonald's, providing evidence in support of regulating child-directed marketing of unhealthy foods using toys. Copyright © 2015 Elsevier Ltd. All rights reserved.

Displacement-noise-free gravitational-wave detection with a single Fabry-Perot cavity: A toy model

International Nuclear Information System (INIS)

Tarabrin, Sergey P.; Vyatchanin, Sergey P.

2008-01-01

We propose a detuned Fabry-Perot cavity, pumped through both the mirrors, as a toy model of the gravitational-wave (GW) detector partially free from displacement noise of the test masses. It is demonstrated that the noise of cavity mirrors can be eliminated, but the one of lasers and detectors cannot. The isolation of the GW signal from displacement noise of the mirrors is achieved in a proper linear combination of the cavity output signals. The construction of such a linear combination is possible due to the difference between the reflected and transmitted output signals of detuned cavity. We demonstrate that in low-frequency region the obtained displacement-noise-free response signal is much stronger than the f gw 3 -limited sensitivity of displacement-noise-free interferometers recently proposed by S. Kawamura and Y. Chen. However, the loss of the resonant gain in the noise cancelation procedure results is the sensitivity limitation of our toy model by displacement noise of lasers and detectors

Social Behaviors Increase in Children with Autism in the Presence of Animals Compared to Toys

Science.gov (United States)

O'Haire, Marguerite E.; McKenzie, Samantha J.; Beck, Alan M.; Slaughter, Virginia

2013-01-01

Background Previous research has demonstrated the capacity of animal presence to stimulate social interaction among humans. The purpose of this study was to examine the interactions of children with autism spectrum disorder (ASD) with an adult and their typically-developing peers in the presence of animals (two guinea pigs) compared to toys. Methods Ninety-nine children from 15 classrooms in 4 schools met the inclusion criteria and participated in groups of three (1 child with ASD and 2 typically-developing peers). Each group was video-recorded during three 10-minute, free-play sessions with toys and three 10-minute, free-play sessions with two guinea pigs. Two blinded observers coded the behavior of children with ASD and their peers. To account for the nested study design, data were analyzed using hierarchical generalized linear modeling. Results Participants with ASD demonstrated more social approach behaviors (including talking, looking at faces, and making tactile contact) and received more social approaches from their peers in the presence of animals compared to toys. They also displayed more prosocial behaviors and positive affect (i.e., smiling and laughing) as well as less self-focused behaviors and negative affect (i.e., frowning, crying, and whining) in the presence of animals compared to toys. Conclusions These results suggest that the presence of an animal can significantly increase positive social behaviors among children with ASD. PMID:23468902

Social behaviors increase in children with autism in the presence of animals compared to toys.

Directory of Open Access Journals (Sweden)

Marguerite E O'Haire

Full Text Available Previous research has demonstrated the capacity of animal presence to stimulate social interaction among humans. The purpose of this study was to examine the interactions of children with autism spectrum disorder (ASD with an adult and their typically-developing peers in the presence of animals (two guinea pigs compared to toys.Ninety-nine children from 15 classrooms in 4 schools met the inclusion criteria and participated in groups of three (1 child with ASD and 2 typically-developing peers. Each group was video-recorded during three 10-minute, free-play sessions with toys and three 10-minute, free-play sessions with two guinea pigs. Two blinded observers coded the behavior of children with ASD and their peers. To account for the nested study design, data were analyzed using hierarchical generalized linear modeling.Participants with ASD demonstrated more social approach behaviors (including talking, looking at faces, and making tactile contact and received more social approaches from their peers in the presence of animals compared to toys. They also displayed more prosocial behaviors and positive affect (i.e., smiling and laughing as well as less self-focused behaviors and negative affect (i.e., frowning, crying, and whining in the presence of animals compared to toys.These results suggest that the presence of an animal can significantly increase positive social behaviors among children with ASD.

Social behaviors increase in children with autism in the presence of animals compared to toys.

Science.gov (United States)

O'Haire, Marguerite E; McKenzie, Samantha J; Beck, Alan M; Slaughter, Virginia

2013-01-01

Previous research has demonstrated the capacity of animal presence to stimulate social interaction among humans. The purpose of this study was to examine the interactions of children with autism spectrum disorder (ASD) with an adult and their typically-developing peers in the presence of animals (two guinea pigs) compared to toys. Ninety-nine children from 15 classrooms in 4 schools met the inclusion criteria and participated in groups of three (1 child with ASD and 2 typically-developing peers). Each group was video-recorded during three 10-minute, free-play sessions with toys and three 10-minute, free-play sessions with two guinea pigs. Two blinded observers coded the behavior of children with ASD and their peers. To account for the nested study design, data were analyzed using hierarchical generalized linear modeling. Participants with ASD demonstrated more social approach behaviors (including talking, looking at faces, and making tactile contact) and received more social approaches from their peers in the presence of animals compared to toys. They also displayed more prosocial behaviors and positive affect (i.e., smiling and laughing) as well as less self-focused behaviors and negative affect (i.e., frowning, crying, and whining) in the presence of animals compared to toys. These results suggest that the presence of an animal can significantly increase positive social behaviors among children with ASD.

Nonlinear Dynamics of the Woodpecker Toy

NARCIS (Netherlands)

Leine, R.I.; Glocker, C.; Campen, van D.H.

2001-01-01

This paper studies bifurcations in systems with impact andfriction, modeled with a rigid multibody approach. Knowledgefrom the field of Nonlinear Dynamics is therefore combined withtheory from the field of Nonsmooth Mechanics. The nonlineardynamics is studied of a commercial wooden toy. The toyshows

Two-Dimensional Wetting Transition Modeling with the Potts Model

Science.gov (United States)

Lopes, Daisiane M.; Mombach, José C. M.

2017-12-01

A droplet of a liquid deposited on a surface structured in pillars may have two states of wetting: (1) Cassie-Baxter (CB), the liquid remains on top of the pillars, also known as heterogeneous wetting, or (2) Wenzel, the liquid fills completely the cavities of the surface, also known as homogeneous wetting. Studies show that between these two states, there is an energy barrier that, when overcome, results in the transition of states. The transition can be achieved by changes in geometry parameters of the surface, by vibrations of the surface or by evaporation of the liquid. In this paper, we present a comparison of two-dimensional simulations of the Cassie-Wenzel transition on pillar-structured surfaces using the cellular Potts model (CPM) with studies performed by Shahraz et al. In our work, we determine a transition diagram by varying the surface parameters such as the interpillar distance ( G) and the pillar height ( H). Our results were compared to those obtained by Shahraz et al. obtaining good agreement.

Two iridates, two models, and two approaches: A comparative study on magnetism in three-dimensional honeycomb materials

Science.gov (United States)

Lee, Eric Kin-Ho; Rau, Jeffrey G.; Kim, Yong Baek

2016-05-01

Two recent theoretical works studied the role of Kitaev interactions in the newly observed incommensurate magnetic order in the hyper-honeycomb (β -Li2IrO3 ) and stripy-honeycomb (γ -Li2IrO3 ) iridates. Each of these works analyzed a different model (J K Γ versus coupled zigzag chain model) using a contrasting method (classical versus soft-spin analysis). The lack of commonality between these works precludes meaningful comparisons and a proper understanding of these unusual orderings. In this study, we complete the unfinished picture initiated by these two works by solving both models with both approaches for both three-dimensional (3D) honeycomb iridates. Through comparisons between all combinations of models, techniques, and materials, we find that the bond-isotropic J K Γ model consistently predicts the experimental phase of β -Li2IrO3 regardless of the method used, while the experimental phase of γ -Li2IrO3 can be generated by the soft-spin approach with eigenmode mixing irrespective of the model used. To gain further insights, we solve a one-dimensional (1D) quantum spin-chain model related to both 3D models using the density matrix renormalization group method to form a benchmark. We discover that in the 1D model, incommensurate correlations in the classical and soft-spin analysis survive in the quantum limit only in the presence of the symmetric-off-diagonal exchange Γ found in the J K Γ model. The relevance of these results to the real materials is also discussed.

Quantum entanglement and phase transition in a two-dimensional photon-photon pair model

International Nuclear Information System (INIS)

Zhang Jianjun; Yuan Jianhui; Zhang Junpei; Cheng Ze

2013-01-01

We propose a two-dimensional model consisting of photons and photon pairs. In the model, the mixed gas of photons and photon pairs is formally equivalent to a two-dimensional system of massive bosons with non-vanishing chemical potential, which implies the existence of two possible condensate phases. Using the variational method, we discuss the quantum phase transition of the mixed gas and obtain the critical coupling line analytically. Moreover, we also find that the phase transition of the photon gas can be interpreted as enhanced second harmonic generation. We then discuss the entanglement between photons and photon pairs. Additionally, we also illustrate how the entanglement between photons and photon pairs can be associated with the phase transition of the system.

HR Del REMNANT ANATOMY USING TWO-DIMENSIONAL SPECTRAL DATA AND THREE-DIMENSIONAL PHOTOIONIZATION SHELL MODELS

International Nuclear Information System (INIS)

Moraes, Manoel; Diaz, Marcos

2009-01-01

The HR Del nova remnant was observed with the IFU-GMOS at Gemini North. The spatially resolved spectral data cube was used in the kinematic, morphological, and abundance analysis of the ejecta. The line maps show a very clumpy shell with two main symmetric structures. The first one is the outer part of the shell seen in Hα, which forms two rings projected in the sky plane. These ring structures correspond to a closed hourglass shape, first proposed by Harman and O'Brien. The equatorial emission enhancement is caused by the superimposed hourglass structures in the line of sight. The second structure seen only in the [O III] and [N II] maps is located along the polar directions inside the hourglass structure. Abundance gradients between the polar caps and equatorial region were not found. However, the outer part of the shell seems to be less abundant in oxygen and nitrogen than the inner regions. Detailed 2.5-dimensional photoionization modeling of the three-dimensional shell was performed using the mass distribution inferred from the observations and the presence of mass clumps. The resulting model grids are used to constrain the physical properties of the shell as well as the central ionizing source. A sequence of three-dimensional clumpy models including a disk-shaped ionization source is able to reproduce the ionization gradients between polar and equatorial regions of the shell. Differences between shell axial ratios in different lines can also be explained by aspherical illumination. A total shell mass of 9 x 10 -4 M sun is derived from these models. We estimate that 50%-70% of the shell mass is contained in neutral clumps with density contrast up to a factor of 30.

Two-Q-boson interferometry and generalization of the Wigner function

Energy Technology Data Exchange (ETDEWEB)

Padula, Sandra S. [Instituto de Fisica Teorica (IFT), Sao Paulo, SP (Brazil)]. E-mail: padula@ift.unesp.br; Zhang, Q.H. [McGill Univ., Montreal (Canada). Physics Dept.

2004-07-01

Bose-Einstein correlations of two identically charged Q-bosons are derived considering those particles to be confined in finite volumes. Boundary effects on single Q-boson spectrum are also studied. We illustrate these effects by two examples: a toy model (one-dimensional box) and a confining sphere. We also confined a generalized expression for the Wigner function depending on the deformation parameter Q, which is reduced to its original functional form in the limit Q {yields} 1. (author)

Two-Q-boson interferometry and generalization of the Wigner function

International Nuclear Information System (INIS)

Padula, Sandra S.; Zhang, Q.H.

2004-01-01

Bose-Einstein correlations of two identically charged Q-bosons are derived considering those particles to be confined in finite volumes. Boundary effects on single Q-boson spectrum are also studied. We illustrate these effects by two examples: a toy model (one-dimensional box) and a confining sphere. We also derive a generalized expression for the Wigner function depending on the deformation parameter Q, which is reduced to its original functional form in the limit Q → 1

Two-Q-boson interferometry and generalization of the Wigner function

International Nuclear Information System (INIS)

Padula, Sandra S.; Zhang, Q.H.

2004-01-01

Bose-Einstein correlations of two identically charged Q-bosons are derived considering those particles to be confined in finite volumes. Boundary effects on single Q-boson spectrum are also studied. We illustrate these effects by two examples: a toy model (one-dimensional box) and a confining sphere. We also confined a generalized expression for the Wigner function depending on the deformation parameter Q, which is reduced to its original functional form in the limit Q → 1. (author)

Gribov horizon and i-particles: About a toy model and the construction of physical operators

International Nuclear Information System (INIS)

Baulieu, L.; Dudal, D.; Vandersickel, N.; Guimaraes, M. S.; Sorella, S. P.; Huber, M. Q.; Zwanziger, D.

2010-01-01

Restricting the functional integral to the Gribov region Ω leads to a deep modification of the behavior of Euclidean Yang-Mills theories in the infrared region. For example, a gluon propagator of the Gribov type, (k 2 /k 4 +γ 4 ), can be viewed as a propagating pair of unphysical modes, called here i-particles, with complex masses ±iγ 2 . From this viewpoint, gluons are unphysical and one can see them as being confined. We introduce a simple toy model describing how a suitable set of composite operators can be constructed out of i-particles whose correlation functions exhibit only real branch cuts, with associated positive spectral density. These composite operators can thus be called physical and are the toy analogy of glueballs in the Gribov-Zwanziger theory.

A two-dimensional analytical subthreshold behavior model for junctionless dual-material cylindrical surrounding-gate MOSFETs

International Nuclear Information System (INIS)

Li Cong; Zhuang Yi-Qi; Zhang Li; Jin Gang

2014-01-01

A two-dimensional analytical subthreshold behavior model for junctionless dual-material cylindrical surrounding-gate (JLDMCSG) metal-oxide-semiconductor field-effect transistors (MOSFETs) is proposed. It is derived by solving the two-dimensional Poisson's equation in two continuous cylindrical regions with any simplifying assumption. Using this analytical model, the subthreshold characteristics of JLDMCSG MOSFETs are investigated in terms of channel electrostatic potential, horizontal electric field, and subthreshold current. Compared to junctionless single-material cylindrical surrounding-gate MOSFETs, JLDMCSG MOSFETs can effectively suppress short-channel effects and simultaneously improve carrier transport efficiency. It is found that the subthreshold current of JLDMCSG MOSFETs can be significantly reduced by adopting both a thin oxide and thin silicon channel. The accuracy of the analytical model is verified by its good agreement with the three-dimensional numerical simulator ISE TCAD

Spectroscopic properties of a two-dimensional time-dependent Cepheid model. I. Description and validation of the model

Science.gov (United States)

Vasilyev, V.; Ludwig, H.-G.; Freytag, B.; Lemasle, B.; Marconi, M.

2017-10-01

Context. Standard spectroscopic analyses of Cepheid variables are based on hydrostatic one-dimensional model atmospheres, with convection treated using various formulations of mixing-length theory. Aims: This paper aims to carry out an investigation of the validity of the quasi-static approximation in the context of pulsating stars. We check the adequacy of a two-dimensional time-dependent model of a Cepheid-like variable with focus on its spectroscopic properties. Methods: With the radiation-hydrodynamics code CO5BOLD, we construct a two-dimensional time-dependent envelope model of a Cepheid with Teff = 5600 K, log g = 2.0, solar metallicity, and a 2.8-day pulsation period. Subsequently, we perform extensive spectral syntheses of a set of artificial iron lines in local thermodynamic equilibrium. The set of lines allows us to systematically study effects of line strength, ionization stage, and excitation potential. Results: We evaluate the microturbulent velocity, line asymmetry, projection factor, and Doppler shifts. The microturbulent velocity, averaged over all lines, depends on the pulsational phase and varies between 1.5 and 2.7 km s-1. The derived projection factor lies between 1.23 and 1.27, which agrees with observational results. The mean Doppler shift is non-zero and negative, -1 km s-1, after averaging over several full periods and lines. This residual line-of-sight velocity (related to the "K-term") is primarily caused by horizontal inhomogeneities, and consequently we interpret it as the familiar convective blueshift ubiquitously present in non-pulsating late-type stars. Limited statistics prevent firm conclusions on the line asymmetries. Conclusions: Our two-dimensional model provides a reasonably accurate representation of the spectroscopic properties of a short-period Cepheid-like variable star. Some properties are primarily controlled by convective inhomogeneities rather than by the Cepheid-defining pulsations. Extended multi-dimensional modelling

Two-dimensional discrete dislocation models of deformation in polycrystalline thin metal films on substrates

International Nuclear Information System (INIS)

Hartmaier, Alexander; Buehler, Markus J.; Gao, Huajian

2005-01-01

The time-dependent irreversible deformation of polycrystalline thin metal films on substrates is investigated using two-dimensional discrete dislocation dynamics models incorporating essential parameters determined from atomistic studies. The work is focused on the mechanical properties of uncapped films, where diffusive processes play an important role. The simulations incorporate dislocation climb along the grain boundary as well as conservative glide. Despite of severe limitations of the two-dimensional dislocation models, the simulation results are found to largely corroborate experimental findings on different dominant deformation mechanisms at different film thicknesses

Numerical simulation of transient, adiabatic, two-dimensional two-phase flow using the two-fluid model

International Nuclear Information System (INIS)

Neves Conti, T. das.

1983-01-01

A numerical method is developed to simulate adiabatic, transient, two-dimensional two-phase flow. The two-fluid model is used to obtain the mass and momentum conservation equations. These are solved by an iterative algorithm emphoying a time-marching scheme. Based on the corrective procedure of Hirt and Harlow a poisson equation is derived for the pressure field. This equation is finite-differenced and solved by a suitable matrix inversion technique. In the absence of experiment results several numerical tests were made in order to chec accuracy, convergence and stability of the proposed method. Several tests were also performed to check whether the behavior of void fraction and phasic velocities conforms with previous observations. (Author) [pt

PLAY ACTIVITY WITH MILITARY TOYS AT PRESCHOOL AGE

Directory of Open Access Journals (Sweden)

Irina Nikolaevna Aleshina

2013-12-01

Full Text Available The article analyzes various attitudes to military toys, both positive and negative, existing in Russia and abroad. Toy weapons are viewed as a separate type of military toy. The study looks at the impact of military toys on children’s emotions and personality. The study looks at how children play games on their own and the way they organize them. We have conducted an experiment where three types of toys were used – military toys, soft toys and objects that act as toy substitutes. The study of games and the roles children took showed their poor playing skills. The research has detected existing connection between imagination and thinking ability and the children’s play activity. None of the children took the role of ‘the defender of the weak’ or ‘Patria’s defender’, which contradicts the results of an opinion survey of children’s parents who think that military toys help to develop ‘patriotism’, ‘courage’, and ‘teach to protect the weak’.Repeated observation of the way the same children play with military toys has shown that they take the role of defenders of the motherland or the weak only after watching TV-programmes or fiction films which show male characters defending their motherland or the weak using weapons, which shows that children’s games have social character.The experiment’s results detected what activity adults, who are concerned with the young generation’s attitude to weapons and violence, should perform. It is vital to strengthen children’s moral, ethical and cognitive spheres first, and only in second place fight against sales of military toys both in Russia and abroad.DOI: http://dx.doi.org/10.12731/2218-7405-2013-8-53

Can a Toy Encourage Lower Calorie Meal Bundle Selection in Children? A Field Experiment on the Reinforcing Effects of Toys on Food Choice.

Directory of Open Access Journals (Sweden)

Martin Reimann

Full Text Available The goal of this research was to test whether including an inexpensive nonfood item (toy with a smaller-sized meal bundle (420 calories, but not with the regular-sized meal bundle version (580 calories, would incentivize children to choose the smaller-sized meal bundle, even among children with overweight and obesity. Logistic regression was used to evaluate the effect in a between-subjects field experiment of a toy on smaller-sized meal choice (here, a binary choice between a smaller-sized or regular-sized meal bundles. A random sample of 109 elementary school children from two schools in the Tucson, Arizona metropolitan area (55 females; Mage = 8.53 years, SDage = 2.14; MBMI = 18.30, SDBMI = 4.42 participated. Children's height and weight were measured and body-mass-index (BMI was calculated, adjusting for age and sex. In our sample, 21 children were considered to be either overweight or obese. Logistic regression was used to evaluate the effect of a toy on smaller-sized meal choice. Results revealed that the inclusion of a toy with a smaller-sized meal, but not with the regular-sized version, predicted smaller-sized meal choice (P < .001, suggesting that children can be incentivized to choose less food when such is paired with a toy. BMI neither moderated nor nullified the effect of toy on smaller-sized meal choice (P = .125, suggesting that children with overweight and obesity can also be incentivized to choose less. This article is the first to suggest that fast-food restaurant chains may well utilize toys to motivate children to choose smaller-sized meal bundles. Our findings may be relevant for consumers, health advocates, policy makers, and marketers who would benefit from a strategy that presents healthier, but still desirable, meal bundle options.

Development of a global aerosol model using a two-dimensional sectional method: 1. Model design

Science.gov (United States)

Matsui, H.

2017-08-01

This study develops an aerosol module, the Aerosol Two-dimensional bin module for foRmation and Aging Simulation version 2 (ATRAS2), and implements the module into a global climate model, Community Atmosphere Model. The ATRAS2 module uses a two-dimensional (2-D) sectional representation with 12 size bins for particles from 1 nm to 10 μm in dry diameter and 8 black carbon (BC) mixing state bins. The module can explicitly calculate the enhancement of absorption and cloud condensation nuclei activity of BC-containing particles by aging processes. The ATRAS2 module is an extension of a 2-D sectional aerosol module ATRAS used in our previous studies within a framework of a regional three-dimensional model. Compared with ATRAS, the computational cost of the aerosol module is reduced by more than a factor of 10 by simplifying the treatment of aerosol processes and 2-D sectional representation, while maintaining good accuracy of aerosol parameters in the simulations. Aerosol processes are simplified for condensation of sulfate, ammonium, and nitrate, organic aerosol formation, coagulation, and new particle formation processes, and box model simulations show that these simplifications do not substantially change the predicted aerosol number and mass concentrations and their mixing states. The 2-D sectional representation is simplified (the number of advected species is reduced) primarily by the treatment of chemical compositions using two interactive bin representations. The simplifications do not change the accuracy of global aerosol simulations. In part 2, comparisons with measurements and the results focused on aerosol processes such as BC aging processes are shown.

Milgrom Relation Models for Spiral Galaxies from Two-Dimensional Velocity Maps

OpenAIRE

Barnes, Eric I.; Kosowsky, Arthur; Sellwood, Jerry A.

2007-01-01

Using two-dimensional velocity maps and I-band photometry, we have created mass models of 40 spiral galaxies using the Milgrom relation (the basis of modified Newtonian dynamics, or MOND) to complement previous work. A Bayesian technique is employed to compare several different dark matter halo models to Milgrom and Newtonian models. Pseudo-isothermal dark matter halos provide the best statistical fits to the data in a majority of cases, while the Milgrom relation generally provides good fits...

A Possible Minimum Toy Model with Negative Differential Capacitance for Self-sustained Current Oscillation

International Nuclear Information System (INIS)

Xiong Gang; Sun Zhouzhou; Wang Xiangrong

2007-01-01

We generalize a simple model for superlattices to include the effect of differential capacitance. It is shown that the model always has a stable steady-state solution (SSS) if all differential capacitances are positive. On the other hand, when negative differential capacitance is included, the model can have no stable SSS and be in a self-sustained current oscillation behavior. Therefore, we find a possible minimum toy model with both negative differential resistance and negative differential capacitance which can include the phenomena of both self-sustained current oscillation and I-V oscillation of stable SSSs.

78 FR 66840 - Revocation of Certain Requirements Pertaining to Caps Intended for Use With Toy Guns and Toy Guns...

Science.gov (United States)

2013-11-07

... Certain Requirements Pertaining to Caps Intended for Use With Toy Guns and Toy Guns Not Intended for Use With Caps AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: Section 106 of the... regulations pertaining to caps intended for use with toy guns refer to obsolete equipment, but the ASTM F963...

A Toy Story: Association between Young Children’s Knowledge of Fast Food Toy Premiums and their Fast Food Consumption

Science.gov (United States)

Longacre, Meghan R.; Drake, Keith M.; Titus, Linda J.; Cleveland, Lauren P.; Langeloh, Gail; Hendricks, Kristy; Dalton, Madeline A.

2015-01-01

Fast food restaurants spend millions of dollars annually on child-targeted marketing, a substantial portion of which is allocated to toy premiums for kids’ meals. The objectives of this study were to describe fast food toy premiums, and examine whether young children’s knowledge of fast food toy premiums was associated with their fast food consumption. Parents of 3- to 5-year old children were recruited from pediatric and WIC clinics in Southern New Hampshire, and completed a cross-sectional survey between April 2013–March 2014. Parents reported whether their children usually knew what toys were being offered at fast food restaurants, and whether children had eaten at any of four restaurants that offer toy premiums with kids’ meals (McDonald’s, Burger King, Subway, Wendy’s) during the 7 days preceding the survey. Seventy-one percent of eligible parents participated (N=583); 48.4% did not receive any education beyond high school, and 27.1% of children were non-white. Half (49.7%) the children had eaten at one or more of the four fast food restaurants in the past week; one-third (33.9%) had eaten at McDonald’s. The four restaurants released 49 unique toy premiums during the survey period; McDonald’s released half of these. Even after controlling for parent fast food consumption and sociodemographics, children were 1.38 (95% CI=1.04, 1.82) times more likely to have consumed McDonald’s if they usually knew what toys were offered by fast food restaurants. We did not detect a relationship between children’s toy knowledge and their intake of fast food from the other restaurants. In this community-based sample, young children’s knowledge of fast food toys was associated with a greater frequency of eating at McDonald’s, providing evidence in support of regulating child-directed marketing of unhealthy foods using toys. PMID:26471803

Magic, science and masculinity: marketing toy chemistry sets.

Science.gov (United States)

Al-Gailani, Salim

2009-12-01

At least since the late nineteenth century, toy chemistry sets have featured in standard scripts of the achievement of eminence in science, and they remain important in constructions of scientific identity. Using a selection of these toys manufactured in Britain and the United States, and with particular reference to the two dominant American brands, Gilbert and Chemcraft, this paper suggests that early twentieth-century chemistry sets were rooted in overlapping Victorian traditions of entertainment magic and scientific recreations. As chemistry set marketing copy gradually reoriented towards emphasising scientific modernity, citizenship, discipline and educational value, pre-twentieth-century traditions were subsumed within domestic-and specifically masculine-tropes. These developments in branding strategies point to transformations in both users' engagement with their chemistry sets and the role of scientific toys in domestic play. The chemistry set serves here as a useful tool for measuring cultural change and lay engagement with chemistry.

Hybrid-dimensional modelling of two-phase flow through fractured porous media with enhanced matrix fracture transmission conditions

Science.gov (United States)

Brenner, Konstantin; Hennicker, Julian; Masson, Roland; Samier, Pierre

2018-03-01

In this work, we extend, to two-phase flow, the single-phase Darcy flow model proposed in [26], [12] in which the (d - 1)-dimensional flow in the fractures is coupled with the d-dimensional flow in the matrix. Three types of so called hybrid-dimensional two-phase Darcy flow models are proposed. They all account for fractures acting either as drains or as barriers, since they allow pressure jumps at the matrix-fracture interfaces. The models also permit to treat gravity dominated flow as well as discontinuous capillary pressure at the material interfaces. The three models differ by their transmission conditions at matrix fracture interfaces: while the first model accounts for the nonlinear two-phase Darcy flux conservations, the second and third ones are based on the linear single phase Darcy flux conservations combined with different approximations of the mobilities. We adapt the Vertex Approximate Gradient (VAG) scheme to this problem, in order to account for anisotropy and heterogeneity aspects as well as for applicability on general meshes. Several test cases are presented to compare our hybrid-dimensional models to the generic equi-dimensional model, in which fractures have the same dimension as the matrix, leading to deep insight about the quality of the proposed reduced models.

Limiting hazardous noise exposure from noisy toys: simple, sticky solutions.

Science.gov (United States)

Weinreich, Heather M; Jabbour, Noel; Levine, Samuel; Yueh, Bevan

2013-09-01

To assess noise levels of toys from the Sight & Hearing Association (SHA) 2010 Noisy Toys List and evaluate the change in noise of these toys after covering the speakers with tape or glue. One Group Pretest-Posttest Design. SHA 2010 Toys List (n = 18) toys were tested at distances of 0 and 25 cm from sound source in a soundproof booth using a digital sound-level meter. The dBA level of sound produced by toy was obtained. Toys with speakers (n = 16) were tested before and after altering speakers with plastic packing tape or nontoxic glue. Mean noise level for non-taped toys at 0 and 25 cm was 107.6 dBA (SD ± 8.5) and 82.5 dBA (SD ± 8.8), respectively. With tape, there was a statistically significant decrease in noise level at 0 and 25 cm: 84.2 dBA and 68.2 dBA (P toys. However, there was no significant difference between tape or glue. Overall, altering the toy can significantly decrease the sound a child may experience when playing with toys. However, some toys, even after altering, still produce sound levels that may be considered dangerous. Copyright © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Children's exposure to polybrominated diphenyl ethers (PBDEs) through mouthing toys.

Science.gov (United States)

Ionas, Alin C; Ulevicus, Jocelyn; Gómez, Ana Ballesteros; Brandsma, Sicco H; Leonards, Pim E G; van de Bor, Margot; Covaci, Adrian

2016-02-01

Polybrominated diphenyl ethers (PBDEs) have previously been detected in children toys, yet the risk of child exposure to these chemicals through the mouthing of toys or other items is still unknown. We aimed to expand on the current knowledge by investigating the impact of infants' mouthing activities on exposure to PBDEs present in toys. This was established by a leaching model for determining the amount PBDEs that can leach from toys into saliva in simulated conditions. The PBDE migration rate was at its highest for the 15 min low-exposure scenario incubations (198 pg/cm(2) × min) with the ERM EC-591 certified reference material (CRM) (0.17% w/w PBDEs). The leaching process was congener-dependent, since the percentage of lower brominated PBDE congeners that leached out was up to 4.5 times higher than for the heavier PBDEs. To study the scenario in which a child would mouth on a toy flame retarded with BDE 209 alone, a plastic item containing 7% BDE 209 (w/w) was also tested. The BDE 209 amounts leached out in only 15 min were higher than the amounts leached from the CRM after the 16 h incubation. For the Belgian population, the exposure scenario from mouthing on toys containing PBDEs in amounts similar to the REACH threshold was found to be lower than the exposure from mother's milk, but higher than the exposure through diet or even dust. Copyright © 2015 Elsevier Ltd. All rights reserved.

Structures of two-dimensional three-body systems

International Nuclear Information System (INIS)

Ruan, W.Y.; Liu, Y.Y.; Bao, C.G.

1996-01-01

Features of the structure of L = 0 states of a two-dimensional three-body model system have been investigated. Three types of permutation symmetry of the spatial part, namely symmetric, antisymmetric, and mixed, have been considered. A comparison has been made between the two-dimensional system and the corresponding three-dimensional one. The effect of symmetry on microscopic structures is emphasized. (author)

A Comparison of Simplified Two-dimensional Flow Models Exemplified by Water Flow in a Cavern

Science.gov (United States)

Prybytak, Dzmitry; Zima, Piotr

2017-12-01

The paper shows the results of a comparison of simplified models describing a two-dimensional water flow in the example of a water flow through a straight channel sector with a cavern. The following models were tested: the two-dimensional potential flow model, the Stokes model and the Navier-Stokes model. In order to solve the first two, the boundary element method was employed, whereas to solve the Navier-Stokes equations, the open-source code library OpenFOAM was applied. The results of numerical solutions were compared with the results of measurements carried out on a test stand in a hydraulic laboratory. The measurements were taken with an ADV probe (Acoustic Doppler Velocimeter). Finally, differences between the results obtained from the mathematical models and the results of laboratory measurements were analysed.

Modelling of the thermal parameters of high-power linear laser-diode arrays. Two-dimensional transient model

International Nuclear Information System (INIS)

Bezotosnyi, V V; Kumykov, Kh Kh

1998-01-01

A two-dimensional transient thermal model of an injection laser is developed. This model makes it possible to analyse the temperature profiles in pulsed and cw stripe lasers with an arbitrary width of the stripe contact, and also in linear laser-diode arrays. This can be done for any durations and repetition rates of the pump pulses. The model can also be applied to two-dimensional laser-diode arrays operating quasicontinuously. An analysis is reported of the influence of various structural parameters of a diode array on the thermal regime of a single laser. The temperature distributions along the cavity axis are investigated for different variants of mounting a crystal on a heat sink. It is found that the temperature drop along the cavity length in cw and quasi-cw laser diodes may exceed 20%. (lasers)

A two-dimensional model for the study of interpersonal attraction.

Science.gov (United States)

Montoya, R Matthew; Horton, Robert S

2014-02-01

We describe a model for understanding interpersonal attraction in which attraction can be understood as a product of the initial evaluations we make about others. The model posits that targets are evaluated on two basic dimensions, capacity and willingness, such that affective and behavioral attraction result from evaluations of (a) a target's capacity to facilitate the perceiver's goals/needs and (b) a target's potential willingness to facilitate those goals/needs. The plausibility of the two-dimensional model of attraction is evaluated vis-à-vis the extant literature on various attraction phenomena including the reciprocity of liking effect, pratfall effect, matching hypothesis, arousal effects, and similarity effect. We conclude that considerable evidence across a wide range of phenomena supports the idea that interpersonal attraction is principally determined by inferences about the target's capacity and willingness.

Two-dimensional liquid chromatography

DEFF Research Database (Denmark)

Græsbøll, Rune

-dimensional separation space. Optimization of gradients in online RP×RP is more difficult than in normal HPLC as a result of the increased number of parameters and their influence on each other. Modeling the coverage of the compounds across the two-dimensional chromatogram as a result of a change in gradients could...... be used for optimization purposes, and reduce the time spend on optimization. In this thesis (chapter 6), and manuscript B, a measure of the coverage of the compounds in the twodimensional separation space is defined. It is then shown that this measure can be modeled for changes in the gradient in both...

S-matrix regularities of two-dimensional sigma-models of Stiefel manifolds

International Nuclear Information System (INIS)

Flume-Gorczyca, B.

1980-01-01

The S-matrices of the two-dimensional nonlinear O(n + m)/O(n) and O(n + m)/O(n) x O(m) sigma-models corresponding to Stiefel and Grassmann manifolds, respectively, are compared in leading order in 1/n. It is shown, that after averaging over O(m) labels of the incoming and outgoing particles, the S-matrices of both models become identical. This result explains why commonly expected regularities of the Grassmann models, in particular absence of particle production, are found, modulo an O(m) average, also in Stiefel models. (orig.)

INFLUENCE OF MARKETING ENVIRONMENT ON THE TOY MARKET

OpenAIRE

Violeta A. ANDREIANA (Mihaescu); Calelia G. STOICA (Stanciu); Cornelia D. IVAN (Trandafiroiu)

2014-01-01

Along with the passage of time, parents have manifested a different attitude towards their children, trying to offer them everything they wanted in what concerns the toys. Therefore, the toy market is constantly expending, and the tough competition leads to the quality improvement of the toys and enforces certain standards on the market. The originality and topicality of the theme consist in the change in the toy consumers’ and users’ preferences which required greater attention to be pa...

76 FR 55056 - Toy Safety Standard: Strategic Outreach and Education Plan

Science.gov (United States)

2011-09-06

... to test and certify to the toy safety standard. We plan to use traditional and social media to... testing and certification requirements for children's toys and toy chests and their compliance with ASTM... manufacturers of children's toys must ensure that covered toys are tested for compliance with the toy safety...

Laser-induced breakdown spectroscopy and chemometrics for classification of toys relying on toxic elements

International Nuclear Information System (INIS)

Godoi, Quienly; Leme, Flavio O.; Trevizan, Lilian C.; Pereira Filho, Edenir R.; Rufini, Iolanda A.; Santos, Dario; Krug, Francisco J.

2011-01-01

Quality control of toys for avoiding children exposure to potentially toxic elements is of utmost relevance and it is a common requirement in national and/or international norms for health and safety reasons. Laser-induced breakdown spectroscopy (LIBS) was recently evaluated at authors' laboratory for direct analysis of plastic toys and one of the main difficulties for the determination of Cd, Cr and Pb was the variety of mixtures and types of polymers. As most norms rely on migration (lixiviation) protocols, chemometric classification models from LIBS spectra were tested for sampling toys that present potential risk of Cd, Cr and Pb contamination. The classification models were generated from the emission spectra of 51 polymeric toys and by using Partial Least Squares - Discriminant Analysis (PLS-DA), Soft Independent Modeling of Class Analogy (SIMCA) and K-Nearest Neighbor (KNN). The classification models and validations were carried out with 40 and 11 test samples, respectively. Best results were obtained when KNN was used, with corrected predictions varying from 95% for Cd to 100% for Cr and Pb.

Toys and games in play therapy.

Science.gov (United States)

Meschiany, A; Krontal, S

1998-01-01

The present article discusses the difference between play therapy with toys and play therapy with games from a psychodynamic point of view. Toys are regarded as offering the child an opportunity to develop a variety of transference reactions, while games, because of their inherent competitive characteristic, restrain the scope of possible transference reactions. The authors claim that therapists should consider these eventualities when choosing which games or toys are to be available in the therapy room. This choice might determine, in advance, the initial characteristics of the patient's transference.

The Happy Meal® Effect: the impact of toy premiums on healthy eating among children in Ontario, Canada.

Science.gov (United States)

Hobin, Erin P; Hammond, David G; Daniel, Samantha; Hanning, Rhona M; Manske, Steve

2012-05-24

"Toy premiums", offered with McDonald's Happy Meals®, are a prominent form of food marketing directed at children. Two California jurisdictions recently implemented policies that only permit offering fast-food toy premiums with meals that meet certain nutritional criteria. The primary objective of the current study was to examine elements of this policy in a Canadian context and determine if children select healthier food products if toy premiums are only offered with healthier food options. The study also examined if the impact of restricting toy premiums to healthier foods varied by gender and age. A between-groups experimental study was conducted with 337 children aged 6-12 years attending day camps in Ontario, Canada. Children were offered one of four McDonald's Happy Meals® as part of the camp lunch program: two "healthier" meals that met the nutritional criteria and two meals that did not. In the control condition, all four meals were offered with a toy premium. In the intervention condition, the toy was only offered with the two "healthier" meals. Children were significantly more likely to select the healthier meals when toys were only offered with meals that met nutritional criteria (OR=3.19, 95% CI: 1.89-5.40). The effect of pairing toys with healthier meals had a stronger effect on boys than girls (OR=1.90, 95% CI: 1.14-3.17). Policies that restrict toy premiums to food that meet nutritional criteria may promote healthier eating at fast-food restaurants.

Proton transport in a membrane protein channel: two-dimensional infrared spectrum modeling.

NARCIS (Netherlands)

Liang, C.; Knoester, J.; Jansen, T.L.Th.A.

2012-01-01

We model the two-dimensional infrared (2DIR) spectrum of a proton channel to investigate its applicability as a spectroscopy tool to study the proton transport process in biological systems. Proton transport processes in proton channels are involved in numerous fundamental biochemical reactions.

Painleve analysis and transformations for a generalized two-dimensional variable-coefficient Burgers model from fluid mechanics, acoustics and cosmic-ray astrophysics

International Nuclear Information System (INIS)

Wei, Guang-Mei

2006-01-01

Generalized two-dimensional variable-coefficient Burgers model is of current value in fluid mechanics, acoustics and cosmic-ray astrophysics. In this paper, Painleve analysis leads to the constraints on the variable coefficients for such a model to pass the Painleve test and to an auto-Baecklund transformation. Moreover, four transformations from this model are constructed, to the standard two-dimensional and one-dimensional Burgers models with the relevant constraints on the variable coefficients via symbolic computation. By virtue of the given transformations the properties and solutions of this model can be obtained from those of the standard two-dimensional and one-dimensional ones

Influence of Dzyaloshinskii-Moriya interaction and ballistic spin transport in the two and three-dimensional Heisenberg model

Science.gov (United States)

Lima, L. S.

2018-06-01

We study the effect of Dzyaloshisnkii-Moriya interaction on spin transport in the two and three-dimensional Heisenberg antiferromagnetic models in the square lattice and cubic lattice respectively. For the three-dimensional model, we obtain a large peak for the spin conductivity and therefore a finite AC conductivity. For the two-dimensional model, we have gotten the AC spin conductivity tending to the infinity at ω → 0 limit and a suave decreasing in the spin conductivity with increase of ω. We obtain a small influence of the Dzyaloshinskii-Moriya interaction on the spin conductivity in all cases analyzed.

Two-dimensional threshold voltage analytical model of DMG strained-silicon-on-insulator MOSFETs

International Nuclear Information System (INIS)

Li Jin; Liu Hongxia; Li Bin; Cao Lei; Yuan Bo

2010-01-01

For the first time, a simple and accurate two-dimensional analytical model for the surface potential variation along the channel in fully depleted dual-material gate strained-Si-on-insulator (DMG SSOI) MOSFETs is developed. We investigate the improved short channel effect (SCE), hot carrier effect (HCE), drain-induced barrier-lowering (DIBL) and carrier transport efficiency for the novel structure MOSFET. The analytical model takes into account the effects of different metal gate lengths, work functions, the drain bias and Ge mole fraction in the relaxed SiGe buffer. The surface potential in the channel region exhibits a step potential, which can suppress SCE, HCE and DIBL. Also, strained-Si and SOI structure can improve the carrier transport efficiency, with strained-Si being particularly effective. Further, the threshold voltage model correctly predicts a 'rollup' in threshold voltage with decreasing channel length ratios or Ge mole fraction in the relaxed SiGe buffer. The validity of the two-dimensional analytical model is verified using numerical simulations. (semiconductor devices)

CFD modeling of two-stage ignition in a rapid compression machine: Assessment of zero-dimensional approach

Energy Technology Data Exchange (ETDEWEB)

Mittal, Gaurav [Department of Mechanical Engineering, The University of Akron, Akron, OH 44325 (United States); Raju, Mandhapati P. [General Motor R and D Tech Center, Warren, MI 48090 (United States); Sung, Chih-Jen [Department of Mechanical Engineering, University of Connecticut, Storrs, CT 06269 (United States)

2010-07-15

In modeling rapid compression machine (RCM) experiments, zero-dimensional approach is commonly used along with an associated heat loss model. The adequacy of such approach has not been validated for hydrocarbon fuels. The existence of multi-dimensional effects inside an RCM due to the boundary layer, roll-up vortex, non-uniform heat release, and piston crevice could result in deviation from the zero-dimensional assumption, particularly for hydrocarbons exhibiting two-stage ignition and strong thermokinetic interactions. The objective of this investigation is to assess the adequacy of zero-dimensional approach in modeling RCM experiments under conditions of two-stage ignition and negative temperature coefficient (NTC) response. Computational fluid dynamics simulations are conducted for n-heptane ignition in an RCM and the validity of zero-dimensional approach is assessed through comparisons over the entire NTC region. Results show that the zero-dimensional model based on the approach of 'adiabatic volume expansion' performs very well in adequately predicting the first-stage ignition delays, although quantitative discrepancy for the prediction of the total ignition delays and pressure rise in the first-stage ignition is noted even when the roll-up vortex is suppressed and a well-defined homogeneous core is retained within an RCM. Furthermore, the discrepancy is pressure dependent and decreases as compressed pressure is increased. Also, as ignition response becomes single-stage at higher compressed temperatures, discrepancy from the zero-dimensional simulations reduces. Despite of some quantitative discrepancy, the zero-dimensional modeling approach is deemed satisfactory from the viewpoint of the ignition delay simulation. (author)

Non-perturbative effects in two-dimensional lattice O(N) models

International Nuclear Information System (INIS)

Ogilvie, M.C.; Maryland Univ., College Park

1981-01-01

Non-abelian analogues of Kosterlitz-Thouless vortices may have important effects in two-dimensional lattice spin systems with O(N) symmetries. Renormalization group equations which include these effects are developed in two ways. The first set of equations extends the renormalization group equations of Kosterlitz to 0(N) spin systems, in a form suggested by Cardy and Hamber. The second is derived from a Villain-type 0(N) model using Migdal's recursion relations. Using these equations, the part played by topological excitations int he crossover from weak to strong coupling behavior is studied. Another effect which influences crossover behavior is also discussed; irrelevant operators which occur naturally in lattice theories can make important contributions to the renormalization group flow in the crossover region. When combined with conventional perturbative results, these two effects may explain the observed crossover behavior of these models. (orig.)

Market Analysis, Opportunity Recognition and Strategy Diagnosis in Toy Industry

DEFF Research Database (Denmark)

Khajeheian, Datis

2018-01-01

According to many market researches and industrial reports Iran is one of the biggest toy markets in the Middle East and North Africa region. The Iranian toy market has been identified as a niche market with lots of unexploited opportunities. Nonetheless, the Iranian toy industry has shown...... for this misdirection were that the Iranian toy industry lacked a traditional structure, a strategic perspective and also absence of international cooperation. This research suggests that the Iranian toy industries need to move its focus from manufacturing, where the country has no competitive advantage, toward toy...

The role of spatial topology in a toy model of classical electrodynamics in (1+1) dimensions

International Nuclear Information System (INIS)

Boozer, A.D.

2010-01-01

We discuss the role of spatial topology in a toy model of classical electrodynamics in (1+1) dimensions. The model describes a collection of Newtonian point particles coupled to a pair of scalar fields E(t,x) and B(t,x), which mediate forces between the particles and support freely propagating radiation. We formulate the model on both a line and a circle, and show that the behavior of the model strongly depends on the choice of spatial topology.

Exploring a two-dimensional model of mentor teacher roles in mentoring dialogues

NARCIS (Netherlands)

Dr. F.J.A.J. Crasborn; Dr. Paul Hennissen; Dr. Niels Brouwer; Prof. Dr. Fred Korthagen; Prof. Dr. Theo Bergen

2011-01-01

The extent to which mentor teachers are able to address mentees' individual needs is an important factor in the success of mentoring. A two-dimensional model of mentor teacher roles in mentoring dialogues, entitled MERID, is explored empirically. Data regarding five aspects of mentoring dialogues

Exploring a two-dimensional model of mentor teacher roles in mentoring dialogues

NARCIS (Netherlands)

Crasborn, F.J.A.J.; Hennissen, P.P.M.; Brouwer, C.N.; Korthagen, F.A.J.; Bergen, T.C.M.

2011-01-01

In this study, a two-dimensional model of mentor teacher roles in mentoring dialogues, entitled MERID, is explored empirically. Data regarding five aspects of mentoring dialogues were collected, using a sample of 20 transcriptions of mentoring dialogues, in which 112 topics were discussed and 440

Sensitivity analysis using two-dimensional models of the Whiteshell geosphere

Energy Technology Data Exchange (ETDEWEB)

Scheier, N. W.; Chan, T.; Stanchell, F. W.

1992-12-01

As part of the assessment of the environmental impact of disposing of immobilized nuclear fuel waste in a vault deep within plutonic rock, detailed modelling of groundwater flow, heat transport and containment transport through the geosphere is being performed using the MOTIF finite-element computer code. The first geosphere model is being developed using data from the Whiteshell Research Area, with a hypothetical disposal vault at a depth of 500 m. This report briefly describes the conceptual model and then describes in detail the two-dimensional simulations used to help initially define an adequate three-dimensional representation, select a suitable form for the simplified model to be used in the overall systems assessment with the SYVAC computer code, and perform some sensitivity analysis. The sensitivity analysis considers variations in the rock layer properties, variations in fracture zone configurations, the impact of grouting a vault/fracture zone intersection, and variations in boundary conditions. This study shows that the configuration of major fracture zones can have a major influence on groundwater flow patterns. The flows in the major fracture zones can have high velocities and large volumes. The proximity of the radionuclide source to a major fracture zone may strongly influence the time it takes for a radionuclide to be transported to the surface. (auth)

Supply Chain Management Practices in Toy Supply Chains

DEFF Research Database (Denmark)

Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

2005-01-01

Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

Three-dimensional two-phase mass transport model for direct methanol fuel cells

International Nuclear Information System (INIS)

Yang, W.W.; Zhao, T.S.; Xu, C.

2007-01-01

A three-dimensional (3D) steady-state model for liquid feed direct methanol fuel cells (DMFC) is presented in this paper. This 3D mass transport model is formed by integrating five sub-models, including a modified drift-flux model for the anode flow field, a two-phase mass transport model for the porous anode, a single-phase model for the polymer electrolyte membrane, a two-phase mass transport model for the porous cathode, and a homogeneous mist-flow model for the cathode flow field. The two-phase mass transport models take account the effect of non-equilibrium evaporation/ condensation at the gas-liquid interface. A 3D computer code is then developed based on the integrated model. After being validated against the experimental data reported in the literature, the code was used to investigate numerically transport behaviors at the DMFC anode and their effects on cell performance

A two-stage preventive maintenance optimization model incorporating two-dimensional extended warranty

International Nuclear Information System (INIS)

Su, Chun; Wang, Xiaolin

2016-01-01

In practice, customers can decide whether to buy an extended warranty or not, at the time of item sale or at the end of the basic warranty. In this paper, by taking into account the moments of customers purchasing two-dimensional extended warranty, the optimization of imperfect preventive maintenance for repairable items is investigated from the manufacturer's perspective. A two-dimensional preventive maintenance strategy is proposed, under which the item is preventively maintained according to a specified age interval or usage interval, whichever occurs first. It is highlighted that when the extended warranty is purchased upon the expiration of the basic warranty, the manufacturer faces a two-stage preventive maintenance optimization problem. Moreover, in the second stage, the possibility of reducing the servicing cost over the extended warranty period is explored by classifying customers on the basis of their usage rates and then providing them with customized preventive maintenance programs. Numerical examples show that offering customized preventive maintenance programs can reduce the manufacturer's warranty cost, while a larger saving in warranty cost comes from encouraging customers to buy the extended warranty at the time of item sale. - Highlights: • A two-dimensional PM strategy is investigated. • Imperfect PM strategy is optimized by considering both two-dimensional BW and EW. • Customers are categorized based on their usage rates throughout the BW period. • Servicing cost of the EW is reduced by offering customized PM programs. • Customers buying the EW at the time of sale is preferred for the manufacturer.

Flute-like musical instruments: A toy model investigated through numerical continuation

Science.gov (United States)

Terrien, Soizic; Vergez, Christophe; Fabre, Benoît

2013-07-01

Self-sustained musical instruments (bowed string, woodwind and brass instruments) can be modelled by nonlinear lumped dynamical systems. Among these instruments, flutes and flue organ pipes present the particularity to be modelled as a delay dynamical system. In this paper, such a system, a toy model of flute-like instruments, is studied using numerical continuation. Equilibrium and periodic solutions are explored with respect to the blowing pressure, with focus on amplitude and frequency evolutions along the different solution branches, as well as "jumps" between periodic solution branches. The influence of a second model parameter (namely the inharmonicity) on the behaviour of the system is addressed. It is shown that harmonicity plays a key role in the presence of hysteresis or quasiperiodic regime. Throughout the paper, experimental results on a real instrument are presented to illustrate various phenomena, and allow some qualitative comparisons with numerical results.

Can a Toy Encourage Lower Calorie Meal Bundle Selection in Children? A Field Experiment on the Reinforcing Effects of Toys on Food Choice.

Science.gov (United States)

Reimann, Martin; Lane, Kristen

2017-01-01

The goal of this research was to test whether including an inexpensive nonfood item (toy) with a smaller-sized meal bundle (420 calories), but not with the regular-sized meal bundle version (580 calories), would incentivize children to choose the smaller-sized meal bundle, even among children with overweight and obesity. Logistic regression was used to evaluate the effect in a between-subjects field experiment of a toy on smaller-sized meal choice (here, a binary choice between a smaller-sized or regular-sized meal bundles). A random sample of 109 elementary school children from two schools in the Tucson, Arizona metropolitan area (55 females; Mage = 8.53 years, SDage = 2.14; MBMI = 18.30, SDBMI = 4.42) participated. Children's height and weight were measured and body-mass-index (BMI) was calculated, adjusting for age and sex. In our sample, 21 children were considered to be either overweight or obese. Logistic regression was used to evaluate the effect of a toy on smaller-sized meal choice. Results revealed that the inclusion of a toy with a smaller-sized meal, but not with the regular-sized version, predicted smaller-sized meal choice (P restaurant chains may well utilize toys to motivate children to choose smaller-sized meal bundles. Our findings may be relevant for consumers, health advocates, policy makers, and marketers who would benefit from a strategy that presents healthier, but still desirable, meal bundle options.

Two-dimensional errors

International Nuclear Information System (INIS)

Anon.

1991-01-01

This chapter addresses the extension of previous work in one-dimensional (linear) error theory to two-dimensional error analysis. The topics of the chapter include the definition of two-dimensional error, the probability ellipse, the probability circle, elliptical (circular) error evaluation, the application to position accuracy, and the use of control systems (points) in measurements

Two-dimensional models as testing ground for principles and concepts of local quantum physics

Energy Technology Data Exchange (ETDEWEB)

Schroer, Bert [FU Berlin (Germany). Institut fuer Theoretische Physik

2005-04-15

In the past two-dimensional models of QFT have served as theoretical laboratories for testing new concepts under mathematically controllable condition. In more recent times low-dimensional models (e.g. chiral models, factoring models) often have been treated by special recipes in a way which sometimes led to a loss of unity of QFT. In the present work I try to counteract this apartheid tendency by reviewing past results within the setting of the general principles of QFT. To this I add two new ideas: (1) a modular interpretation of the chiral model Diff(S)-covariance with a close connection to the recently formulated local covariance principle for QFT in curved spacetime and (2) a derivation of the chiral model temperature duality from a suitable operator formulation of the angular Wick rotation (in analogy to the Nelson-Symanzik duality in the Ostertwalder-Schrader setting) for rational chiral theories. The SL(2,Z) modular Verlinde relation is a special case of this thermal duality and (within the family of rational models) the matrix S appearing in the thermal duality relation becomes identified with the statistics character matrix S. The relevant angular 'Euclideanization' is done in the setting of the Tomita-Takesaki modular formalism of operator algebras. I find it appropriate to dedicate this work to the memory of J. A. Swieca with whom I shared the interest in two-dimensional models as a testing ground for QFT for more than one decade. This is a significantly extended version of an 'Encyclopedia of Mathematical Physics' contribution hep-th/0502125. (author)

Two-dimensional models as testing ground for principles and concepts of local quantum physics

International Nuclear Information System (INIS)

Schroer, Bert

2005-04-01

In the past two-dimensional models of QFT have served as theoretical laboratories for testing new concepts under mathematically controllable condition. In more recent times low-dimensional models (e.g. chiral models, factoring models) often have been treated by special recipes in a way which sometimes led to a loss of unity of QFT. In the present work I try to counteract this apartheid tendency by reviewing past results within the setting of the general principles of QFT. To this I add two new ideas: (1) a modular interpretation of the chiral model Diff(S)-covariance with a close connection to the recently formulated local covariance principle for QFT in curved spacetime and (2) a derivation of the chiral model temperature duality from a suitable operator formulation of the angular Wick rotation (in analogy to the Nelson-Symanzik duality in the Ostertwalder-Schrader setting) for rational chiral theories. The SL(2,Z) modular Verlinde relation is a special case of this thermal duality and (within the family of rational models) the matrix S appearing in the thermal duality relation becomes identified with the statistics character matrix S. The relevant angular 'Euclideanization' is done in the setting of the Tomita-Takesaki modular formalism of operator algebras. I find it appropriate to dedicate this work to the memory of J. A. Swieca with whom I shared the interest in two-dimensional models as a testing ground for QFT for more than one decade. This is a significantly extended version of an 'Encyclopedia of Mathematical Physics' contribution hep-th/0502125. (author)

Finite volume model for two-dimensional shallow environmental flow

Science.gov (United States)

Simoes, F.J.M.

2011-01-01

This paper presents the development of a two-dimensional, depth integrated, unsteady, free-surface model based on the shallow water equations. The development was motivated by the desire of balancing computational efficiency and accuracy by selective and conjunctive use of different numerical techniques. The base framework of the discrete model uses Godunov methods on unstructured triangular grids, but the solution technique emphasizes the use of a high-resolution Riemann solver where needed, switching to a simpler and computationally more efficient upwind finite volume technique in the smooth regions of the flow. Explicit time marching is accomplished with strong stability preserving Runge-Kutta methods, with additional acceleration techniques for steady-state computations. A simplified mass-preserving algorithm is used to deal with wet/dry fronts. Application of the model is made to several benchmark cases that show the interplay of the diverse solution techniques.

The (2+1)-dimensional axial universes—solutions to the Einstein equations, dimensional reduction points and Klein–Fock–Gordon waves

International Nuclear Information System (INIS)

Fiziev, P P; Shirkov, D V

2012-01-01

The paper presents a generalization and further development of our recent publications, where solutions of the Klein–Fock–Gordon equation defined on a few particular D = (2 + 1)-dimensional static spacetime manifolds were considered. The latter involve toy models of two-dimensional spaces with axial symmetry, including dimensional reduction to the one-dimensional space as a singular limiting case. Here, the non-static models of space geometry with axial symmetry are under consideration. To make these models closer to physical reality, we define a set of ‘admissible’ shape functions ρ(t, z) as the (2 + 1)-dimensional Einstein equation solutions in the vacuum spacetime, in the presence of the Λ-term and for the spacetime filled with the standard ‘dust’. It is curious that in the last case the Einstein equations reduce to the well-known Monge–Ampère equation, thus enabling one to obtain the general solution of the Cauchy problem, as well as a set of other specific solutions involving one arbitrary function. A few explicit solutions of the Klein–Fock–Gordon equation in this set are given. An interesting qualitative feature of these solutions relates to the dimensional reduction points, their classification and time behavior. In particular, these new entities could provide us with novel insight into the nature of P- and T-violations and of the Big Bang. A short comparison with other attempts to utilize the dimensional reduction of the spacetime is given. (paper)

Local persistence and blocking in the two-dimensional blume-capel model

OpenAIRE

Silva, Roberto da; Dahmen, S. R.

2004-01-01

In this paper we study the local persistence of the two-dimensional Blume-Capel Model by extending the concept of Glauber dynamics. We verify that for any value of the ratio alpha = D/J between anisotropy D and exchange J the persistence shows a power law behavior. In particular for alpha 0 (a ¹ 1) we observe the occurrence of blocking.

Spectral properties near the Mott transition in the two-dimensional Hubbard model

Science.gov (United States)

Kohno, Masanori

2013-03-01

Single-particle excitations near the Mott transition in the two-dimensional (2D) Hubbard model are investigated by using cluster perturbation theory. The Mott transition is characterized by the loss of the spectral weight from the dispersing mode that leads continuously to the spin-wave excitation of the Mott insulator. The origins of the dominant modes of the 2D Hubbard model near the Mott transition can be traced back to those of the one-dimensional Hubbard model. Various anomalous spectral features observed in cuprate high-temperature superconductors, such as the pseudogap, Fermi arc, flat band, doping-induced states, hole pockets, and spinon-like and holon-like branches, as well as giant kink and waterfall in the dispersion relation, are explained in a unified manner as properties near the Mott transition in a 2D system.

Dynamics of a neuron model in different two-dimensional parameter-spaces

Science.gov (United States)

Rech, Paulo C.

2011-03-01

We report some two-dimensional parameter-space diagrams numerically obtained for the multi-parameter Hindmarsh-Rose neuron model. Several different parameter planes are considered, and we show that regardless of the combination of parameters, a typical scenario is preserved: for all choice of two parameters, the parameter-space presents a comb-shaped chaotic region immersed in a large periodic region. We also show that exist regions close these chaotic region, separated by the comb teeth, organized themselves in period-adding bifurcation cascades.

Designing Toys to Support Children's Development

Science.gov (United States)

Page, Tom; Thorsteinsson, Gisli

2017-01-01

This article reports a study that aimed to contribute to the theory of good toy design in terms of the value of using toys for children development. Moreover, the study attempts to evaluate ways in which children play and study the toys they commonly use with respect to how it influence their adulthood. The authors firstly looked into the…

Sex differences in rhesus monkey toy preferences parallel those of children

Science.gov (United States)

Hassett, Janice M.; Siebert, Erin R.; Wallen, Kim

2008-01-01

Socialization processes, parents, or peers encouraging play with gender specific toys are thought to be the primary force shaping sex differences in toy preference. A contrast in view is that toy preferences reflect biologically determined preferences for specific activities facilitated by specific toys. Sex differences in juvenile activities, such as rough and tumble play, peer preferences, and infant interest, share similarities in humans and monkeys. Thus if activity preferences shape toy preferences, male and female monkeys may show toy preferences similar to those seen in boys and girls. We compared the interactions of 34 rhesus monkeys, living within a 135 monkey troop, with human wheeled toys and plush toys. Male monkeys, like boys, showed consistent and strong preferences for wheeled toys, while female monkeys, like girls, showed greater variability in preferences. Thus, the magnitude of preference for wheeled over plush toys differed significantly between males and females. The similarities to human findings demonstrate that such preferences can develop without explicit gendered socialization. We offer the hypothesis that toy preferences reflect hormonally influenced behavioral and cognitive biases which are sculpted by social processes into the sex differences seen in monkeys and humans. PMID:18452921

Analysis of sound pressure levels emitted by children's toys.

Science.gov (United States)

Sleifer, Pricila; Gonçalves, Maiara Santos; Tomasi, Marinês; Gomes, Erissandra

2013-06-01

To verify the levels of sound pressure emitted by non-certified children's toys. Cross-sectional study of sound toys available at popular retail stores of the so-called informal sector. Electronic, mechanical, and musical toys were analyzed. The measurement of each product was carried out by an acoustic engineer in an acoustically isolated booth, by a decibel meter. To obtain the sound parameters of intensity and frequency, the toys were set to produce sounds at a distance of 10 and 50cm from the researcher's ear. The intensity of sound pressure [dB(A)] and the frequency in hertz (Hz) were measured. 48 toys were evaluated. The mean sound pressure 10cm from the ear was 102±10 dB(A), and at 50cm, 94±8 dB(A), with ptoys was above 85dB(A). The frequency ranged from 413 to 6,635Hz, with 56.3% of toys emitting frequency higher than 2,000Hz. The majority of toys assessed in this research emitted a high level of sound pressure.

Percentage of toxic trace elements; Pb, Cr and Cd in certain plastic toys, Isfahan City

Directory of Open Access Journals (Sweden)

F Kavehzadeh

2006-04-01

Full Text Available Introduction: Recent investigations have detected the presence of significant levels of heavy metals (chromium, lead and cadmium in toys and other PVC products manufactured for children. In some countries, addition of compounds containing toxic metals to toys are limited or prohibited. Methods: To evaluate the safety of some of the plastic toys in the city of Isfahan with respect to toxic trace metals, pb, cr and cd, 75 samples of three types of toys were collected from the toy shop’s and were digested with acid with the two methods ISIRI and ASTM. The heavy metals were determined using atomic absorption spectrophotometer. Variance analysis and T-test were used for data analysis. Results: The result of the study showed that the products tested contained lead, chromium and cadmium and the highest and lowest concentration were related to Pb and Cd, respectively. The statistical analysis of the samples showed that there are no significant differences between ASTM and ISIRI digestion methods. The study revealed that none of the heavy metals in the toy samples exceeded the recommended standard levels. Highest average concentration of Pb and Cd were related to toys with green color and the highest Cr concentration was related to yellow toys in this study. Conclusion: Extensive studies are required to evaluate the quality of the toys being used by children and the toxic trace elements should be eliminated from the plastic materials used for making toys.

Two-dimensional multifractal cross-correlation analysis

International Nuclear Information System (INIS)

Xi, Caiping; Zhang, Shuning; Xiong, Gang; Zhao, Huichang; Yang, Yonghong

2017-01-01

Highlights: • We study the mathematical models of 2D-MFXPF, 2D-MFXDFA and 2D-MFXDMA. • Present the definition of the two-dimensional N 2 -partitioned multiplicative cascading process. • Do the comparative analysis of 2D-MC by 2D-MFXPF, 2D-MFXDFA and 2D-MFXDMA. • Provide a reference on the choice and parameter settings of these methods in practice. - Abstract: There are a number of situations in which several signals are simultaneously recorded in complex systems, which exhibit long-term power-law cross-correlations. This paper presents two-dimensional multifractal cross-correlation analysis based on the partition function (2D-MFXPF), two-dimensional multifractal cross-correlation analysis based on the detrended fluctuation analysis (2D-MFXDFA) and two-dimensional multifractal cross-correlation analysis based on the detrended moving average analysis (2D-MFXDMA). We apply these methods to pairs of two-dimensional multiplicative cascades (2D-MC) to do a comparative study. Then, we apply the two-dimensional multifractal cross-correlation analysis based on the detrended fluctuation analysis (2D-MFXDFA) to real images and unveil intriguing multifractality in the cross correlations of the material structures. At last, we give the main conclusions and provide a valuable reference on how to choose the multifractal algorithms in the potential applications in the field of SAR image classification and detection.

Beauty for pedestrians toy models for CP violation and baryon asymmetry

International Nuclear Information System (INIS)

Lipkin, H.J.

1995-01-01

Why are particles different from antiparticles? C and P Violation - 1956; CP Violation - 1964. Why so little new experimental information in thirty years? Where has all the antimatter gone? Toy models are presented showing: (1) How CPT and ΔI = 1/2 make life difficult in kaon physics by requiring equal K ± total widths and also equal partial widths to many exclusive channels. (2) How to understand and get around CPT restrictions. (3) How CP asymmetries can occur in exclusive partial widths and still add up to equal total widths. (4) Sakharov's 1966 scenario for how CP Violation + proton decay can explain baryon asymmetry (5) How B physics can help

INFLUENCE OF MARKETING ENVIRONMENT ON THE TOY MARKET

Directory of Open Access Journals (Sweden)

Violeta A. ANDREIANA (Mihaescu

2014-04-01

Full Text Available Along with the passage of time, parents have manifested a different attitude towards their children, trying to offer them everything they wanted in what concerns the toys. Therefore, the toy market is constantly expending, and the tough competition leads to the quality improvement of the toys and enforces certain standards on the market. The originality and topicality of the theme consist in the change in the toy consumers’ and users’ preferences which required greater attention to be paid to the influence manifested by the marketing environment on this market. The case study identifies the occurred problems and the toy influence factors by an analysis over the marketing environment components, i.e.: marketing internal environment, micro-environment and macro-environment. The study ends with the recommendation of several solutions for the improvement of the current situation.

Numerical simulation of potato slices drying using a two-dimensional finite element model

Directory of Open Access Journals (Sweden)

Beigi Mohsen

2017-01-01

Full Text Available An experimental and numerical study was conducted to investigate the process of potato slices drying. For simulating the moisture transfer in the samples and predict the dehydration curves, a two-dimensional finite element model was developed and programmed in Compaq Visual Fortran, version 6.5. The model solved the Fick’s second law for slab in a shrinkage system to calculate the unsteady two-dimensional moisture transmission in rectangular coordinates (x,y. Moisture diffusivity and moisture transfer coefficient were determined by minimizing the sum squares of residuals between experimental and numerical predicted data. Shrinkage kinetics of the potato slices during dehydration was determined experimentally and found to be a linear function of removed moisture. The determined parameters were used in the mathematical model. The predicted moisture content values were compared to the experimental data and the validation results demonstrated that the dynamic drying curves were predicted by the methodology very well.

The popularity of toys and play of pre-school children

OpenAIRE

Kump, Janja

2016-01-01

This thesis presents popularity of play and toys in pre-school period, influence of important factors on a play and selection of toys and differences in duration of the play, depending on children's age and gender. In the theoretical part we defined children's play and its importance, also we detaily described development of children's play and presented the meaning of toys. We classified toys according to the basic function and according to adequacy of toys for certain age group. We focu...

Basic problems and solution methods for two-dimensional continuous 3 × 3 order hidden Markov model

International Nuclear Information System (INIS)

Wang, Guo-gang; Tang, Gui-jin; Gan, Zong-liang; Cui, Zi-guan; Zhu, Xiu-chang

2016-01-01

A novel model referred to as two-dimensional continuous 3 × 3 order hidden Markov model is put forward to avoid the disadvantages of the classical hypothesis of two-dimensional continuous hidden Markov model. This paper presents three equivalent definitions of the model, in which the state transition probability relies on not only immediate horizontal and vertical states but also immediate diagonal state, and in which the probability density of the observation relies on not only current state but also immediate horizontal and vertical states. The paper focuses on the three basic problems of the model, namely probability density calculation, parameters estimation and path backtracking. Some algorithms solving the questions are theoretically derived, by exploiting the idea that the sequences of states on rows or columns of the model can be viewed as states of a one-dimensional continuous 1 × 2 order hidden Markov model. Simulation results further demonstrate the performance of the algorithms. Because there are more statistical characteristics in the structure of the proposed new model, it can more accurately describe some practical problems, as compared to two-dimensional continuous hidden Markov model.

Hamiltonian formalism of two-dimensional Vlasov kinetic equation.

Science.gov (United States)

Pavlov, Maxim V

2014-12-08

In this paper, the two-dimensional Benney system describing long wave propagation of a finite depth fluid motion and the multi-dimensional Russo-Smereka kinetic equation describing a bubbly flow are considered. The Hamiltonian approach established by J. Gibbons for the one-dimensional Vlasov kinetic equation is extended to a multi-dimensional case. A local Hamiltonian structure associated with the hydrodynamic lattice of moments derived by D. J. Benney is constructed. A relationship between this hydrodynamic lattice of moments and the two-dimensional Vlasov kinetic equation is found. In the two-dimensional case, a Hamiltonian hydrodynamic lattice for the Russo-Smereka kinetic model is constructed. Simple hydrodynamic reductions are presented.

[Survey of plasticizers in polyvinyl chloride toys].

Science.gov (United States)

Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

2012-01-01

Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

Limitations to the use of two-dimensional thermal modeling of a nuclear waste repository

International Nuclear Information System (INIS)

Davis, B.W.

1979-01-01

Thermal modeling of a nuclear waste repository is basic to most waste management predictive models. It is important that the modeling techniques accurately determine the time-dependent temperature distribution of the waste emplacement media. Recent modeling studies show that the time-dependent temperature distribution can be accurately modeled in the far-field using a 2-dimensional (2-D) planar numerical model; however, the near-field cannot be modeled accurately enough by either 2-D axisymmetric or 2-D planar numerical models for repositories in salt. The accuracy limits of 2-D modeling were defined by comparing results from 3-dimensional (3-D) TRUMP modeling with results from both 2-D axisymmetric and 2-D planar. Both TRUMP and ADINAT were employed as modeling tools. Two-dimensional results from the finite element code, ADINAT were compared with 2-D results from the finite difference code, TRUMP; they showed almost perfect correspondence in the far-field. This result adds substantially to confidence in future use of ADINAT and its companion stress code ADINA for thermal stress analysis. ADINAT was found to be somewhat sensitive to time step and mesh aspect ratio. 13 figures, 4 tables

Thermal conduction in classical low-dimensional lattices

International Nuclear Information System (INIS)

Lepri, Stefano; Livi, Roberto; Politi, Antonio

2003-01-01

Deriving macroscopic phenomenological laws of irreversible thermodynamics from simple microscopic models is one of the tasks of non-equilibrium statistical mechanics. We consider stationary energy transport in crystals with reference to simple mathematical models consisting of coupled oscillators on a lattice. The role of lattice dimensionality on the breakdown of the Fourier's law is discussed and some universal quantitative aspects are emphasized: the divergence of the finite-size thermal conductivity is characterized by universal laws in one and two dimensions. Equilibrium and non-equilibrium molecular dynamics methods are presented along with a critical survey of previous numerical results. Analytical results for the non-equilibrium dynamics can be obtained in the harmonic chain where the role of disorder and localization can be also understood. The traditional kinetic approach, based on the Boltzmann-Peierls equation is also briefly sketched with reference to one-dimensional chains. Simple toy models can be defined in which the conductivity is finite. Anomalous transport in integrable non-linear systems is briefly discussed. Finally, possible future research themes are outlined

ONE-DIMENSIONAL AND TWO-DIMENSIONAL LEADERSHIP STYLES

Directory of Open Access Journals (Sweden)

Nikola Stefanović

2007-06-01

Full Text Available In order to motivate their group members to perform certain tasks, leaders use different leadership styles. These styles are based on leaders' backgrounds, knowledge, values, experiences, and expectations. The one-dimensional styles, used by many world leaders, are autocratic and democratic styles. These styles lie on the two opposite sides of the leadership spectrum. In order to precisely define the leadership styles on the spectrum between the autocratic leadership style and the democratic leadership style, leadership theory researchers use two dimensional matrices. The two-dimensional matrices define leadership styles on the basis of different parameters. By using these parameters, one can identify two-dimensional styles.

A two-dimensional kinetic model of the scrape-off layer

International Nuclear Information System (INIS)

Catto, P.J.; Hazeltine, R.D.

1993-09-01

A two-dimensional (radius and poloidal angle), analytically tractable kinetic model of the ion (or energetic electron) behavior in the scrape-off layer of a limiter or divertor plasma in a tokamak is presented. The model determines the boundary conditions on the core ion density and ion temperature gradients, the power load on the limiter or divertor plates, the energy carried per particle to the walls, and the effective flux limit. The self-consistent electrostatic potential in the quasi-neutral scrape-off layer is determined by using the ion kinetic model of the layer along with a Maxwell-Boltzmann electron response that occurs because most electrons are reflected by the Debye sheaths (assumed to be infinitely thin) at the limiter or divertor plates

Two dimensional kicked quantum Ising model: dynamical phase transitions

International Nuclear Information System (INIS)

Pineda, C; Prosen, T; Villaseñor, E

2014-01-01

Using an efficient one and two qubit gate simulator operating on graphical processing units, we investigate ergodic properties of a quantum Ising spin 1/2 model on a two-dimensional lattice, which is periodically driven by a δ-pulsed transverse magnetic field. We consider three different dynamical properties: (i) level density, (ii) level spacing distribution of the Floquet quasienergy spectrum, and (iii) time-averaged autocorrelation function of magnetization components. Varying the parameters of the model, we found transitions between ordered (non-ergodic) and quantum chaotic (ergodic) phases, but the transitions between flat and non-flat spectral density do not correspond to transitions between ergodic and non-ergodic local observables. Even more surprisingly, we found good agreement of level spacing distribution with the Wigner surmise of random matrix theory for almost all values of parameters except where the model is essentially non-interacting, even in regions where local observables are not ergodic or where spectral density is non-flat. These findings question the versatility of the interpretation of level spacing distribution in many-body systems and stress the importance of the concept of locality. (paper)

Increasing Toy Play among Toddlers with Multiple Disabilities in an Inclusive Classroom: A More-to-Less, Child-Directed Intervention Continuum.

Science.gov (United States)

DiCarlo, Cynthia F.; Reid, Dennis H.; Stricklin, Sarintha B.

2003-01-01

A study evaluated a more-to-less, child-directed continuum of intervention to increase toy play among six toddlers with multiple disabilities. Toddlers were provided with repeated choices of preferred toys in a child-directed manner. Nonprompted toy play for two toddlers increased. Toy play also increased for another child after staff prompts and…

A study on the visual effect of toy in children life

Directory of Open Access Journals (Sweden)

Gholamreza Azarbouyeh Dinaky

2013-06-01

Full Text Available This research is aimed at studying features and visual qualities of images in toys and toys packaging. This research is trying to find answers for toys and toys packaging processes from design to production, what should be considered by an illustrator and also collecting information for interested people and students in arrival to the labor market and recognizing the existing challenges. This research method was fundamental and theoretical and the most important research question was that, what is the first impression of images on the toys and packaging surfaces containing toys? And what are the most important features of images on the toys and toys packaging surfaces? The most important obtained results were that although the quick attraction of the purchaser is the most effective factor in images, it cannot be the first effect on toys and toys packaging surfaces. Features such as color, attractive design and revealing the inside containing of the packaging are the most important features of images in this packaging. Now we can say that images as visual part of the toys and toys packaging have the most important role in introducing the capabilities, function and the attractiveness of a production. Images especially for children who have a closer relationship with fiction world is more attractive than other visual elements and also despite of the visual attraction such as color coordination, adaptation of plan with packaging and etc.

Stationary states of the two-dimensional nonlinear Schrödinger model with disorder

DEFF Research Database (Denmark)

Gaididei, Yuri Borisovich; Hendriksen, D.; Christiansen, Peter Leth

1998-01-01

Solitonlike excitations in the presence of disorder in the two-dimensional cubic nonlinear Schrodinger equation are analyzed. The continuum as well as the discrete problem are analyzed. In the continuum model, otherwise unstable excitations are stabilized in the presence of disorder...

Two-dimensional quantum electrodynamics as a model in the constructive quantum field theory

International Nuclear Information System (INIS)

Ito, K.R.

1976-01-01

We investigate two-dimensional quantum electrodynamics((QED) 2 ) type models on the basis of the Hamiltonian formalism of a vector field. The transformation into a sine-Gordon equation is clarified as a generalized mass-shift transformation through canonical linear transformations. (auth.)

The construction of a two-dimensional reproducing kernel function and its application in a biomedical model.

Science.gov (United States)

Guo, Qi; Shen, Shu-Ting

2016-04-29

There are two major classes of cardiac tissue models: the ionic model and the FitzHugh-Nagumo model. During computer simulation, each model entails solving a system of complex ordinary differential equations and a partial differential equation with non-flux boundary conditions. The reproducing kernel method possesses significant applications in solving partial differential equations. The derivative of the reproducing kernel function is a wavelet function, which has local properties and sensitivities to singularity. Therefore, study on the application of reproducing kernel would be advantageous. Applying new mathematical theory to the numerical solution of the ventricular muscle model so as to improve its precision in comparison with other methods at present. A two-dimensional reproducing kernel function inspace is constructed and applied in computing the solution of two-dimensional cardiac tissue model by means of the difference method through time and the reproducing kernel method through space. Compared with other methods, this method holds several advantages such as high accuracy in computing solutions, insensitivity to different time steps and a slow propagation speed of error. It is suitable for disorderly scattered node systems without meshing, and can arbitrarily change the location and density of the solution on different time layers. The reproducing kernel method has higher solution accuracy and stability in the solutions of the two-dimensional cardiac tissue model.

STS-54 DSO 802, Educational activities 'Physics of Toys', equipment

Science.gov (United States)

1993-01-01

Toys for STS-54 Detailed Supplementary Objective (DSO) 802, Educational activities 'Physics of Toys', are displayed on a table top. Part of the educational activities onboard Endeavour, Orbiter Vehicle (OV) 105, will include several experiments with these toys. DSO 802 will allow the crewmembers to experiment with the various types of toys in a microgravity environment while talking to pupils who will be able to monitor (via classroom television (TV) sets) the onboard activities at their schools. NOTE: Also labeled the Application Specific Preprogrammed Experiment Culture System Physic of Toys (ASPEC).

Classification of integrable two-dimensional models of relativistic field theory by means of computer

International Nuclear Information System (INIS)

Getmanov, B.S.

1988-01-01

The results of classification of two-dimensional relativistic field models (1) spinor; (2) essentially-nonlinear scalar) possessing higher conservation laws using the system of symbolic computer calculations are presented shortly

Food packaged with toys: an investigation on potential obesogenic effects in Indian children.

Science.gov (United States)

Gregori, Dario; Gulati, Achal; Hochdorn, Alexander; Ballali, Simonetta; Paramesh, Haralappa; Kumar, Malathi; Baldi, Ileana

2014-09-01

To investigate, in a large pan Indian sample of school children, whether gadgets (toys) added to food increase food consumption, and if contemporary exposure to TV and/or advertising is a further promoting factor. A total of 1,680 Indian children were first randomized to food exposure with or without toy and then to a five-level exposure to TV viewing and advertising according to a 2 × 5 full factorial ad libitum eating design study. The sample size was computed to detect a difference of 20 Kcal of caloric intake (assuming the same standard deviation of 20 Kcal in both groups) between "food with gadget" (Toy) and "food alone" (No Toy) groups in each level of the exposure to TV and advertising factor, given an alpha error equal to 0.05 and a power of 0.90. Mean caloric intake both in "Toy" and "No Toy" group was around 223 Kcal. When considering exposure to TV and advertising, mean values varied negligibly between 222 and 225 Kcal. According to linear models for the effect of gadget and exposure to TV and/or advertising on children's intake, no significant adjusted associations were found, neither as main effects nor as interactions. Food consumption by children is not influenced by the presence of added toys, even after adjustment for several potential confounding factors. The city where they live and age significantly influences Indian children's caloric intake.

Two-dimensional analytic weighting functions for limb scattering

Science.gov (United States)

Zawada, D. J.; Bourassa, A. E.; Degenstein, D. A.

2017-10-01

Through the inversion of limb scatter measurements it is possible to obtain vertical profiles of trace species in the atmosphere. Many of these inversion methods require what is often referred to as weighting functions, or derivatives of the radiance with respect to concentrations of trace species in the atmosphere. Several radiative transfer models have implemented analytic methods to calculate weighting functions, alleviating the computational burden of traditional numerical perturbation methods. Here we describe the implementation of analytic two-dimensional weighting functions, where derivatives are calculated relative to atmospheric constituents in a two-dimensional grid of altitude and angle along the line of sight direction, in the SASKTRAN-HR radiative transfer model. Two-dimensional weighting functions are required for two-dimensional inversions of limb scatter measurements. Examples are presented where the analytic two-dimensional weighting functions are calculated with an underlying one-dimensional atmosphere. It is shown that the analytic weighting functions are more accurate than ones calculated with a single scatter approximation, and are orders of magnitude faster than a typical perturbation method. Evidence is presented that weighting functions for stratospheric aerosols calculated under a single scatter approximation may not be suitable for use in retrieval algorithms under solar backscatter conditions.

Toys are a potential source of cross-infection in general practitioners' waiting rooms.

Science.gov (United States)

Merriman, Eileen; Corwin, Paul; Ikram, Rosemary

2002-01-01

The waiting rooms of general practitioners' surgeries usually have toys provided for children. The level of contamination of these toys and the effectiveness of toy decontamination was investigated in this study. Hard toys from general practitioners' waiting rooms had relatively low levels of contamination, with only 13.5% of toys showing any coliform counts. There were no hard toys with heavy contamination by coliforms or other bacteria. Soft toys were far more likely to be contaminated, with 20% of toys showing moderate to heavy coliform contamination and 90% showing moderate to heavy bacterial contamination. Many waiting-room toys are not cleaned routinely. Soft toys are hard to disinfect and tend to rapidly become recontaminated after cleaning. Conversely, hard toys can be cleaned and disinfected easily. Soft toys in general practitioners' waiting rooms pose an infectious risk and it is therefore recommended that soft toys are unsuitable for doctors' waiting rooms. PMID:11885823

A Novel Machine Learning Strategy Based on Two-Dimensional Numerical Models in Financial Engineering

Directory of Open Access Journals (Sweden)

Qingzhen Xu

2013-01-01

Full Text Available Machine learning is the most commonly used technique to address larger and more complex tasks by analyzing the most relevant information already present in databases. In order to better predict the future trend of the index, this paper proposes a two-dimensional numerical model for machine learning to simulate major U.S. stock market index and uses a nonlinear implicit finite-difference method to find numerical solutions of the two-dimensional simulation model. The proposed machine learning method uses partial differential equations to predict the stock market and can be extensively used to accelerate large-scale data processing on the history database. The experimental results show that the proposed algorithm reduces the prediction error and improves forecasting precision.

CORPORATE VALUATION USING TWO-DIMENSIONAL MONTE CARLO SIMULATION

Directory of Open Access Journals (Sweden)

Toth Reka

2010-12-01

Full Text Available In this paper, we have presented a corporate valuation model. The model combine several valuation methods in order to get more accurate results. To determine the corporate asset value we have used the Gordon-like two-stage asset valuation model based on the calculation of the free cash flow to the firm. We have used the free cash flow to the firm to determine the corporate market value, which was calculated with use of the Black-Scholes option pricing model in frame of the two-dimensional Monte Carlo simulation method. The combined model and the use of the two-dimensional simulation model provides a better opportunity for the corporate value estimation.

Swimming Performance of Toy Robotic Fish

Science.gov (United States)

Petelina, Nina; Mendelson, Leah; Techet, Alexandra

2015-11-01

HEXBUG AquaBotsTM are a commercially available small robot fish that come in a variety of ``species''. These models have varying caudal fin shapes and randomly-varied modes of swimming including forward locomotion, diving, and turning. In this study, we assess the repeatability and performance of the HEXBUG swimming behaviors and discuss the use of these toys to develop experimental techniques and analysis methods to study live fish swimming. In order to determine whether these simple, affordable model fish can be a valid representation for live fish movement, two models, an angelfish and a shark, were studied using 2D Particle Image Velocimetry (PIV) and 3D Synthetic Aperture PIV. In a series of experiments, the robotic fish were either allowed to swim freely or towed in one direction at a constant speed. The resultant measurements of the caudal fin wake are compared to data from previous studies of a real fish and simplified flapping propulsors.

Toys in Space, 2

Science.gov (United States)

Herbert, Dexter (Editor)

1993-01-01

In this educational video from the 'Liftoff to Learning' series, astronauts from the STS-54 Mission (Mario Runco, John Casper, Don McMonagle, Susan Helms, and Greg Harbaugh) explain how microgravity and weightlessness in space affects motion by using both mechanical and nonmechanical toys (gravitrons, slinkys, dart boards, magnetic marbles, and others). The gravitational effects on rotation, force, acceleration, magnetism, magnetic fields, center of axis, and velocity are actively demonstrated using these toys through experiments onboard the STS-54 Mission flight as a part of their spaceborne experiment payload. [Resource Guide referenced in the video is not available.

Two-dimensional QCD as a model for strong interaction

International Nuclear Information System (INIS)

Ellis, J.

1977-01-01

After an introduction to the formalism of two-dimensional QCD, its applications to various strong interaction processes are reviewed. Among the topics discussed are spectroscopy, deep inelastic cross-sections, ''hard'' processes involving hadrons, ''Regge'' behaviour, the existence of the Pomeron, and inclusive hadron cross-sections. Attempts are made to abstracts features useful for four-dimensional QCD phenomenology. (author)

Numerical investigation of fluid mud motion using a three-dimensional hydrodynamic and two-dimensional fluid mud coupling model

Science.gov (United States)

Yang, Xiaochen; Zhang, Qinghe; Hao, Linnan

2015-03-01

A water-fluid mud coupling model is developed based on the unstructured grid finite volume coastal ocean model (FVCOM) to investigate the fluid mud motion. The hydrodynamics and sediment transport of the overlying water column are solved using the original three-dimensional ocean model. A horizontal two-dimensional fluid mud model is integrated into the FVCOM model to simulate the underlying fluid mud flow. The fluid mud interacts with the water column through the sediment flux, current, and shear stress. The friction factor between the fluid mud and the bed, which is traditionally determined empirically, is derived with the assumption that the vertical distribution of shear stress below the yield surface of fluid mud is identical to that of uniform laminar flow of Newtonian fluid in the open channel. The model is validated by experimental data and reasonable agreement is found. Compared with numerical cases with fixed friction factors, the results simulated with the derived friction factor exhibit the best agreement with the experiment, which demonstrates the necessity of the derivation of the friction factor.

Current Trends in providing the Toys Security and Consumer Protection

Directory of Open Access Journals (Sweden)

Luiela Magdalena Csorba

2014-01-01

Full Text Available The goods and services market is not in equilibrium. This affects continuously the consumers under multiple aspects: economic, educational, health insurance and security, and so on. Not even the toys market outlets or the toys trading market aren’t trouble free. Because publications in the toys consumer protection field are seldom (legislation is the starting point in analyzing this area, the checks carried out at national level which showed the marketed toys insecurity and the abuses of the economic agents in this sector determined us to analyze the degree in which people knows the toy-related injuries and the danger to which they expose their own children when purchasing dangerous toys. That’s why a quantitative research was conducted, using the method of questionnaire, distributed through the Romanian consumers, with the aim to check the empirically awareness and the seriousness with which they relate the risks concerning the toys consume.

Role of toys in the development of healthy infants

Directory of Open Access Journals (Sweden)

Emilia Mikołajewska

2015-04-01

Emilia Mikołajewska Rehabilitation Clinic Military Clinical Hospital No. 10 and Polyclinic Bydgoszcz, Poland e-mail: e.mikolajewska@wp.pl, emiliam@cm.umk.pl www: http://emikolajewska.netstrefa.eu       Keywords: rehabilitation; development; gesture; toy use; parent–child interaction;       Abstract   Developmental outcomes in infants can be significantly improved thanks to promising use of approapriate toys. Objective assessment of their positive influence to functional achievements in healthy infants may completely change attitude to new generation of toys, developing motor, cognitive, and social skills. Despite advances in toys assessment their true influence remains incomplete. This study aims at assessment how current knowledge and experience influences principles of the toys selection and use in healthy infants.

Two dimensional numerical model for steam--water flow in a sudden contraction

International Nuclear Information System (INIS)

Crowe, C.T.; Choi, H.N.

1976-01-01

A computational model developed for two-dimensional dispersed two-phase flows is applied to steam--water flow in a sudden contraction. The calculational scheme utilizes the cellular approach in which each cell is regarded as a control volume and the droplets are regarded as sources of mass, momentum and energy to the conveying (steam) phase. The predictions show how droplets channel in the entry region and affect the velocity and pressure distributions along the duct

The consensus in the two-feature two-state one-dimensional Axelrod model revisited

International Nuclear Information System (INIS)

Biral, Elias J P; Tilles, Paulo F C; Fontanari, José F

2015-01-01

The Axelrod model for the dissemination of culture exhibits a rich spatial distribution of cultural domains, which depends on the values of the two model parameters: F, the number of cultural features and q, the common number of states each feature can assume. In the one-dimensional model with F = q = 2, which is closely related to the constrained voter model, Monte Carlo simulations indicate the existence of multicultural absorbing configurations in which at least one macroscopic domain coexist with a multitude of microscopic ones in the thermodynamic limit. However, rigorous analytical results for the infinite system starting from the configuration where all cultures are equally likely show convergence to only monocultural or consensus configurations. Here we show that this disagreement is due simply to the order that the time-asymptotic limit and the thermodynamic limit are taken in the simulations. In addition, we show how the consensus-only result can be derived using Monte Carlo simulations of finite chains. (paper)

The consensus in the two-feature two-state one-dimensional Axelrod model revisited

Science.gov (United States)

Biral, Elias J. P.; Tilles, Paulo F. C.; Fontanari, José F.

2015-04-01

The Axelrod model for the dissemination of culture exhibits a rich spatial distribution of cultural domains, which depends on the values of the two model parameters: F, the number of cultural features and q, the common number of states each feature can assume. In the one-dimensional model with F = q = 2, which is closely related to the constrained voter model, Monte Carlo simulations indicate the existence of multicultural absorbing configurations in which at least one macroscopic domain coexist with a multitude of microscopic ones in the thermodynamic limit. However, rigorous analytical results for the infinite system starting from the configuration where all cultures are equally likely show convergence to only monocultural or consensus configurations. Here we show that this disagreement is due simply to the order that the time-asymptotic limit and the thermodynamic limit are taken in the simulations. In addition, we show how the consensus-only result can be derived using Monte Carlo simulations of finite chains.

Two-dimensional topological field theories coupled to four-dimensional BF theory

International Nuclear Information System (INIS)

Montesinos, Merced; Perez, Alejandro

2008-01-01

Four-dimensional BF theory admits a natural coupling to extended sources supported on two-dimensional surfaces or string world sheets. Solutions of the theory are in one to one correspondence with solutions of Einstein equations with distributional matter (cosmic strings). We study new (topological field) theories that can be constructed by adding extra degrees of freedom to the two-dimensional world sheet. We show how two-dimensional Yang-Mills degrees of freedom can be added on the world sheet, producing in this way, an interactive (topological) theory of Yang-Mills fields with BF fields in four dimensions. We also show how a world sheet tetrad can be naturally added. As in the previous case the set of solutions of these theories are contained in the set of solutions of Einstein's equations if one allows distributional matter supported on two-dimensional surfaces. These theories are argued to be exactly quantizable. In the context of quantum gravity, one important motivation to study these models is to explore the possibility of constructing a background-independent quantum field theory where local degrees of freedom at low energies arise from global topological (world sheet) degrees of freedom at the fundamental level

Development and validation of a two-dimensional fast-response flood estimation model

Energy Technology Data Exchange (ETDEWEB)

Judi, David R [Los Alamos National Laboratory; Mcpherson, Timothy N [Los Alamos National Laboratory; Burian, Steven J [UNIV OF UTAK

2009-01-01

A finite difference formulation of the shallow water equations using an upwind differencing method was developed maintaining computational efficiency and accuracy such that it can be used as a fast-response flood estimation tool. The model was validated using both laboratory controlled experiments and an actual dam breach. Through the laboratory experiments, the model was shown to give good estimations of depth and velocity when compared to the measured data, as well as when compared to a more complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. The simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. The simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies show that a relatively numerical scheme used to solve the complete shallow water equations can be used to accurately estimate flood inundation. Future work will focus on further reducing the computation time needed to provide flood inundation estimates for fast-response analyses. This will be accomplished through the efficient use of multi-core, multi-processor computers coupled with an efficient domain-tracking algorithm, as well as an understanding of the impacts of grid resolution on model results.

Familiarizing with Toy Food: Preliminary Research and Future Directions

Science.gov (United States)

Lynch, Meghan

2012-01-01

Objective: A qualitative content analysis of children and parents interacting with toy food in their homes in view of recommendations for developing healthful food preferences. Methods: YouTube videos (n = 101) of children and parents interacting in toy kitchen settings were analyzed using qualitative content analysis. Toy food was categorized…

Respiratory viral RNA on toys in pediatric office waiting rooms.

Science.gov (United States)

Pappas, Diane E; Hendley, J Owen; Schwartz, Richard H

2010-02-01

Toys in pediatric office waiting rooms may be fomites for transmission of viruses. Eighteen samples were taken from office objects on 3 occasions. Samples were tested for presence of picornavirus (either rhinovirus or enterovirus) on all 3 sample days; in addition, January samples were tested for respiratory syncytial virus and March samples were tested for influenza A and B. In addition, 15 samples were obtained from the sick waiting room before and after cleaning. Polymerase chain reaction was used to detect picornavirus, respiratory syncytial virus, and influenza A or B virus. Finally, 20 samples were obtained from the fingers of a researcher after handling different toys in the sick waiting room, and samples were then obtained from all the same toys; all samples were tested for picornavirus by polymerase chain reaction. Viral RNA was detected on 11 of 52 (21%) of toys sampled. Ten of the positives were picornavirus; 1 was influenza B virus. Three (30%) of 10 toys from the new toy bag, 6 of 30 (20%) in the sick child waiting room, and 2 of 12 (17%) in the well child waiting room were positive. Six (40%) of 15 toys in the sick waiting room were positive for picornaviral RNA before cleaning; after cleaning, 4 (27%) of 15 were positive in spite of the fact that RNA was removed from 4 of 6 of the original positives. Three (15%) of 20 toys in the sick waiting room were positive for picornaviral RNA, but RNA was not transferred to the fingers of the investigator who handled these toys. About 20% of the objects in a pediatric office may be contaminated with respiratory viral RNA, most commonly picornavirus RNA. Cleaning with a disinfectant cloth was only modestly effective in removing the viral RNA from the surfaces of toys, but transfer of picornaviral RNA from toys to fingers was inefficient.

Summing over all genera for d>1: A toy model

International Nuclear Information System (INIS)

Ambjoern, J.; Durhuus, B.; Jonsson, T.

1990-04-01

We consider a reduced model of discretized random surfaces which is believed to be a good approximation to the standard theory of discretized random surfaces for large dimensions d. In this model we observe multicritical behaviour. The relation between internal observables, in the sense of two-dimensional gravity, and external observables, in the sense of string theory, can be studied in detail. Furthermore, it is possible to perform explicitly the summation over all genera in this model. (orig.)

Two-dimensional finite element heat transfer model of softwood. Part II, Macrostructural effects

Science.gov (United States)

Hongmei Gu; John F. Hunt

2006-01-01

A two-dimensional finite element model was used to study the effects of structural features on transient heat transfer in softwood lumber with various orientations. Transient core temperature was modeled for lumber samples “cut” from various locations within a simulated log. The effects of ring orientation, earlywood to latewood (E/L) ratio, and ring density were...

Modelling floor heating systems using a validated two-dimensional ground coupled numerical model

DEFF Research Database (Denmark)

Weitzmann, Peter; Kragh, Jesper; Roots, Peter

2005-01-01

This paper presents a two-dimensional simulation model of the heat losses and tempera-tures in a slab on grade floor with floor heating which is able to dynamically model the floor heating system. The aim of this work is to be able to model, in detail, the influence from the floor construction...... the floor. This model can be used to design energy efficient houses with floor heating focusing on the heat loss through the floor construction and foundation. It is found that it is impor-tant to model the dynamics of the floor heating system to find the correct heat loss to the ground, and further......, that the foundation has a large impact on the energy consumption of buildings heated by floor heating. Consequently, this detail should be in focus when designing houses with floor heating....

Choosing Safe Toys

Science.gov (United States)

... and other groups can help you make those buying decisions. Still, use your own best judgment — and consider your child's temperament, habits, and behavior whenever you buy a new toy. You may ...

Toying with Motion.

Science.gov (United States)

Galus, Pamela J.

2002-01-01

Presents a variety of activities that support the development of an understanding of Newton's laws of motion. Activities use toy cars, mobile roads, and a seat-of-nails. Includes a scoring rubric. (DDR)

Chern-Simons matrix models, two-dimensional Yang-Mills theory and the Sutherland model

International Nuclear Information System (INIS)

Szabo, Richard J; Tierz, Miguel

2010-01-01

We derive some new relationships between matrix models of Chern-Simons gauge theory and of two-dimensional Yang-Mills theory. We show that q-integration of the Stieltjes-Wigert matrix model is the discrete matrix model that describes q-deformed Yang-Mills theory on S 2 . We demonstrate that the semiclassical limit of the Chern-Simons matrix model is equivalent to the Gross-Witten model in the weak-coupling phase. We study the strong-coupling limit of the unitary Chern-Simons matrix model and show that it too induces the Gross-Witten model, but as a first-order deformation of Dyson's circular ensemble. We show that the Sutherland model is intimately related to Chern-Simons gauge theory on S 3 , and hence to q-deformed Yang-Mills theory on S 2 . In particular, the ground-state wavefunction of the Sutherland model in its classical equilibrium configuration describes the Chern-Simons free energy. The correspondence is extended to Wilson line observables and to arbitrary simply laced gauge groups.

Surface state decoherence in loop quantum gravity, a first toy model

International Nuclear Information System (INIS)

Feller, Alexandre; Livine, Etera R

2017-01-01

The quantum-to-classical transition through decoherence is a major facet of the semi-classical analysis of quantum models that are supposed to admit a classical regime, as quantum gravity should be. A particular problem of interest is the decoherence of black hole horizons and holographic screens induced by the bulk-boundary coupling with interior degrees of freedom. Here in this paper we present a first toy-model, in the context of loop quantum gravity, for the dynamics of a surface geometry as an open quantum system. We discuss the resulting decoherence and recoherence and compare the exact density matrix evolution to the commonly used master equation approximation à la Lindblad underlining its merits and limitations. The prospect of this study is to have a clearer understanding of the boundary decoherence of black hole horizons seen by outside observers. (paper)

Two-dimensional NMR spectrometry

International Nuclear Information System (INIS)

Farrar, T.C.

1987-01-01

This article is the second in a two-part series. In part one (ANALYTICAL CHEMISTRY, May 15) the authors discussed one-dimensional nuclear magnetic resonance (NMR) spectra and some relatively advanced nuclear spin gymnastics experiments that provide a capability for selective sensitivity enhancements. In this article and overview and some applications of two-dimensional NMR experiments are presented. These powerful experiments are important complements to the one-dimensional experiments. As in the more sophisticated one-dimensional experiments, the two-dimensional experiments involve three distinct time periods: a preparation period, t 0 ; an evolution period, t 1 ; and a detection period, t 2

Chaotic dynamics in two-dimensional noninvertible maps

CERN Document Server

Mira, Christian; Cathala, Jean-Claude; Gardini, Laura

1996-01-01

This book is essentially devoted to complex properties (Phase plane structure and bifurcations) of two-dimensional noninvertible maps, i.e. maps having either a non-unique inverse, or no real inverse, according to the plane point. They constitute models of sets of discrete dynamical systems encountered in Engineering (Control, Signal Processing, Electronics), Physics, Economics, Life Sciences. Compared to the studies made in the one-dimensional case, the two-dimensional situation remained a long time in an underdeveloped state. It is only since these last years that the interest for this resea

Two-dimensional models for the optical response of thin films

Science.gov (United States)

Li, Yilei; Heinz, Tony F.

2018-04-01

In this work, we present a systematic study of 2D optical models for the response of thin layers of material under excitation by normally incident light. The treatment, within the framework of classical optics, analyzes a thin film supported by a semi-infinite substrate, with both the thin layer and the substrate assumed to exhibit local, isotropic linear response. Starting from the conventional three-dimensional (3D) slab model of the system, we derive a two-dimensional (2D) sheet model for the thin film in which the optical response is described by a sheet optical conductivity. We develop criteria for the applicability of this 2D sheet model for a layer with an optical thickness far smaller than the wavelength of the light. We examine in detail atomically thin semi-metallic and semiconductor van-der-Waals layers and ultrathin metal films as representative examples. Excellent agreement of the 2D sheet model with the 3D slab model is demonstrated over a broad spectral range from the radio frequency limit to the near ultraviolet. A linearized version of system response for the 2D model is also presented for the case where the influence of the optically thin layer is sufficiently weak. Analytical expressions for the applicability and accuracy of the different optical models are derived, and the appropriateness of the linearized treatment for the materials is considered. We discuss the advantages, as well as limitations, of these models for the purpose of deducing the optical response function of the thin layer from experiment. We generalize the theory to take into account in-plane anisotropy, layered thin film structures, and more general substrates. Implications of the 2D model for the transmission of light by the thin film and for the implementation of half- and totally absorbing layers are discussed.

Digital hardware implementation of a stochastic two-dimensional neuron model.

Science.gov (United States)

Grassia, F; Kohno, T; Levi, T

2016-11-01

This study explores the feasibility of stochastic neuron simulation in digital systems (FPGA), which realizes an implementation of a two-dimensional neuron model. The stochasticity is added by a source of current noise in the silicon neuron using an Ornstein-Uhlenbeck process. This approach uses digital computation to emulate individual neuron behavior using fixed point arithmetic operation. The neuron model's computations are performed in arithmetic pipelines. It was designed in VHDL language and simulated prior to mapping in the FPGA. The experimental results confirmed the validity of the developed stochastic FPGA implementation, which makes the implementation of the silicon neuron more biologically plausible for future hybrid experiments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Alignment dynamics of diffusive scalar gradient in a two-dimensional model flow

Science.gov (United States)

Gonzalez, M.

2018-04-01

The Lagrangian two-dimensional approach of scalar gradient kinematics is revisited accounting for molecular diffusion. Numerical simulations are performed in an analytic, parameterized model flow, which enables considering different regimes of scalar gradient dynamics. Attention is especially focused on the influence of molecular diffusion on Lagrangian statistical orientations and on the dynamics of scalar gradient alignment.

Friction phenomena in a two-dimensional Frenkel–Kontorova model

International Nuclear Information System (INIS)

Mai-Mai, Lin; Wen-Shan, Duan; Jian-Min, Chen

2010-01-01

By using the molecular dynamic simulation method with a fourth-order Runge–Kutta algorithm, a two-dimensional dc- and ac-driven Frenkel–Kontorova (FK) model with a square symmetry substrate potential for a square lattice layer has been investigated in this paper. For this system, the effects of many different parameters on the average velocity and the static friction force have been studied. It is found that not only the amplitude and frequency of ac-driven force, but also the direction of the external driving force and the misfit angle between two layers have some strong influences on the static friction force. It can be concluded that the superlubricity phenomenon appears easily with a larger ac amplitude and lower ac frequency for some special direction of the external force and misfit angle. (condensed matter: structure, thermal and mechanical properties)

Design, development, and clinical validation of therapeutic toys for autistic children.

Science.gov (United States)

Tseng, Kevin C; Tseng, Sung-Hui; Cheng, Hsin-Yi Kathy

2016-07-01

[Purpose] One of the characteristics of autistic children is social interaction difficulties. Although therapeutic toys can promote social interaction, however its related research remains insufficient. The aim of the present study was to build a set of cooperative play toys that are suitable for autistic children. [Subjects and Methods] This study used an innovative product design and development approach as the basis for the creation of cooperative play toys. [Results] The present study has successfully developed cooperative play toys. Compared to the traditional game therapy for autism, cooperative play toy therapy can significantly improve the interactions between autistic children and their peers. [Conclusion] The most critical design theme of cooperative play toys focuses on captivating the interest of autistic children. Based on the needs of the individual cases, the design of the therapeutic toy set was specifically tailored, i.e., by reinforcing the sound and light effects to improve the attractiveness of the toys. In the future, different play modes can be combined with this toy set to further enhance the degree of interaction of autistic children and improve their quality of life and social skills.

Approximate solutions for the two-dimensional integral transport equation. Solution of complex two-dimensional transport problems

International Nuclear Information System (INIS)

Sanchez, Richard.

1980-11-01

This work is divided into two parts: the first part deals with the solution of complex two-dimensional transport problems, the second one (note CEA-N-2166) treats the critically mixed methods of resolution. A set of approximate solutions for the isotropic two-dimensional neutron transport problem has been developed using the interface current formalism. The method has been applied to regular lattices of rectangular cells containing a fuel pin, cladding, and water, or homogenized structural material. The cells are divided into zones that are homogeneous. A zone-wise flux expansion is used to formulate a direct collision probability problem within a cell. The coupling of the cells is effected by making extra assumptions on the currents entering and leaving the interfaces. Two codes have been written: CALLIOPE uses a cylindrical cell model and one or three terms for the flux expansion, and NAUSICAA uses a two-dimensional flux representation and does a truly two-dimensional calculation inside each cell. In both codes, one or three terms can be used to make a space-independent expansion of the angular fluxes entering and leaving each side of the cell. The accuracies and computing times achieved with the different approximations are illustrated by numerical studies on two benchmark problems and by calculations performed in the APOLLO multigroup code [fr

Two-dimensional critical phenomena

International Nuclear Information System (INIS)

Saleur, H.

1987-09-01

Two dimensional critical systems are studied using transformation to free fields and conformal invariance methods. The relations between the two approaches are also studied. The analytical results obtained generally depend on universality hypotheses or on renormalization group trajectories which are not established rigorously, so numerical verifications, mainly using the transfer matrix approach, are presented. The exact determination of critical exponents; the partition functions of critical models on toruses; and results as the critical point is approached are discussed [fr

Application of Gaussian cubature to model two-dimensional population balances

Directory of Open Access Journals (Sweden)

Bałdyga Jerzy

2017-09-01

Full Text Available In many systems of engineering interest the moment transformation of population balance is applied. One of the methods to solve the transformed population balance equations is the quadrature method of moments. It is based on the approximation of the density function in the source term by the Gaussian quadrature so that it preserves the moments of the original distribution. In this work we propose another method to be applied to the multivariate population problem in chemical engineering, namely a Gaussian cubature (GC technique that applies linear programming for the approximation of the multivariate distribution. Examples of the application of the Gaussian cubature (GC are presented for four processes typical for chemical engineering applications. The first and second ones are devoted to crystallization modeling with direction-dependent two-dimensional and three-dimensional growth rates, the third one represents drop dispersion accompanied by mass transfer in liquid-liquid dispersions and finally the fourth case regards the aggregation and sintering of particle populations.

Two-dimensional gauge model with vector U(1) and axial-vector U(1) symmetries

International Nuclear Information System (INIS)

Watabiki, Y.

1989-01-01

We have succeeded in constructing a two-dimensional gauge model with both vector U(1) and axial-vector U(1) symmetries. This model is exactly solvable. The Schwinger term vanishes in this model as a consequence of the above symmetries, and negative-norm states appear. However, the norms of physical states are always positive semidefinite due to the gauge symmetries

Validation of a two-dimensional pollutant dispersion model in an isolated street canyon

Energy Technology Data Exchange (ETDEWEB)

Chan, T.L.; Dong, G.; Leung, C.W.; Cheung, C.S. [The Hong Kong Polytechnic University, Kowloon (Hong Kong). Research Centre for Combustion and Pollution Control, Department of Mechanical Engineering; Hung, W.T. [The Hong Kong Polytechnic University, Kowloon (Hong Kong). Department of Civil and Structural Engineering

2002-07-01

A two-dimensional numerical model based on Reynolds-averaged Navier-Stokes equations coupled with a series of standard, Renormalization Group (RNG) and realizable k-{epsilon} turbulence models was developed to simulate the fluid-flow development and pollutant dispersion within an isolated street canyon using the FLUENT code. In the present study, the validation of the numerical model was evaluated using an extensive experimental database obtained from the atmospheric boundary layer wind tunnel at the Meteorological Institute of Hamburg University, Germany (J. Wind Eng. Ind. Aerodyn. 62 (1996) 37). Among the studied turbulence models, the RNG k-{epsilon} turbulence model was found to be the most optimum turbulence model coupled with the two-dimensional street canyon model developed in the present study. Both the calculated and measured dimensionless pollutant concentrations have been shown to be less dependent on the variation of wind speed and source strength conditions for the studied street canyon aspect ratio of the B/H=1 case. However, the street canyon configuration has significant influence on the pollutant dispersion. The wider street and lower height of the buildings are favorable to pollutant dilution within the street canyon. The fluid-flow development has demonstrated that the rotative vortex or vortices generated within the urban street canyon can transport the pollutants from a line source to the wall surfaces of the buildings. (author)

A two dimensional model of undertow current over mud bed

International Nuclear Information System (INIS)

Mir Hammadul Azam; Abdul Aziz Ibrahim; Noraieni Hj, Mokhtar

1996-01-01

Coastal wave-current dynamics often causes severe erosion and this activity is more prominent within the surf zone. Turbulence generated by breaking wave is a complex phenomena and the degree of complexity increases to a higher degree when it happens over mud bed. A better understanding on wave and current is necessary to enrich the engineering hand to facilitate any coastal development work. Since physical model has certain deficiencies, such as high cost and scaling problem, the need for developing numerical models in such cases is significant. A time averaged two dimensional model has been developed to simulate the undertow over mud bed. A turbulent energy model also included which considers only the vertical variation of mixing length. Production of turbulent kinetic energy in the surf zone has been calculated from an hydraulic jump analogy. The result obtained shows an insignificant vertical variation of current. Further research is needed involving laboratory and field works to get sufficient data for comparing the model results

Dynamic critical phenomena in two-dimensional fully frustrated Coulomb gas model with disorder

International Nuclear Information System (INIS)

Zhang Wei; Luo Mengbo

2008-01-01

The dynamic critical phenomena near depinning transition in two-dimensional fully frustrated square lattice Coulomb gas model with disorders was studied using Monte Carlo technique. The ground state of the model system with disorder σ=0.3 is a disordered state. The dependence of charge current density J on electric field E was investigated at low temperatures. The nonlinear J-E behavior near critical depinning field can be described by a scaling function proposed for three-dimensional flux line system [M.B. Luo, X. Hu, Phys. Rev. Lett. 98 (2007) 267002]. We evaluated critical exponents and found an Arrhenius creep motion for field region E c /2 c . The scaling law of the depinning transition is also obtained from the scaling function

Flocking with discrete symmetry: The two-dimensional active Ising model.

Science.gov (United States)

Solon, A P; Tailleur, J

2015-10-01

We study in detail the active Ising model, a stochastic lattice gas where collective motion emerges from the spontaneous breaking of a discrete symmetry. On a two-dimensional lattice, active particles undergo a diffusion biased in one of two possible directions (left and right) and align ferromagnetically their direction of motion, hence yielding a minimal flocking model with discrete rotational symmetry. We show that the transition to collective motion amounts in this model to a bona fide liquid-gas phase transition in the canonical ensemble. The phase diagram in the density-velocity parameter plane has a critical point at zero velocity which belongs to the Ising universality class. In the density-temperature "canonical" ensemble, the usual critical point of the equilibrium liquid-gas transition is sent to infinite density because the different symmetries between liquid and gas phases preclude a supercritical region. We build a continuum theory which reproduces qualitatively the behavior of the microscopic model. In particular, we predict analytically the shapes of the phase diagrams in the vicinity of the critical points, the binodal and spinodal densities at coexistence, and the speeds and shapes of the phase-separated profiles.

Two-dimensional simulation of sintering process

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Pinto, Lucio Carlos Martins; Vasconcelos, Wander L.

1996-01-01

The results of two-dimensional simulations are directly applied to systems in which one of the dimensions is much smaller than the others, and to sections of three dimensional models. Moreover, these simulations are the first step of the analysis of more complex three-dimensional systems. In this work, two basic features of the sintering process are studied: the types of particle size distributions related to the powder production processes and the evolution of geometric parameters of the resultant microstructures during the solid-state sintering. Random packing of equal spheres is considered in the sintering simulation. The packing algorithm does not take into account the interactive forces between the particles. The used sintering algorithm causes the densification of the particle set. (author)

Gifting with Purpose: Choose Learning Toys This Holiday Season

Science.gov (United States)

Exceptional Parent, 2011

2011-01-01

Kids aged five and under learn best through play. Instead of buying just any toy, look for toys or activities with things to teach: like the alphabet or names of different animals, and more. Children will play with their new toy and not even realize they are learning while they play. This article focuses on gift ideas for the holiday season, with…

The implications of information sharing on bullwhip effects in a toy supply chain

DEFF Research Database (Denmark)

Wong, Chee Yew; El-Beheiry, Mohamed Mostafa; Johansen, John

2007-01-01

This paper compares actual bullwhip effects provided by retailers who shared downstream demand information and retailers who did not share in a three-level (divergent) toy supply chain. The toy supply chain faces high forecast errors and bullwhip effects due to unpredictable and seasonal demand...... demand information. To reduce the bullwhip effect, two solutions using the shared information are tested. They are a proposed premature replenishment rule and a simple forecast updating mechanism. Both solutions are proven capable in reducing bullwhip effects of the toy supply chain even without...... patterns. The results indicate a reduction of the bullwhip effect and an improvement of the fill rate due to the increase of retailers who shared downstream demand information. This paper also addresses two main causes of the bullwhip effect, which are the supply variability and limited use of the shared...

Two-dimensional photon-echo spectroscopy at a conical intersection: A two-mode pyrazine model with dissipation

Energy Technology Data Exchange (ETDEWEB)

Sala, Matthieu; Egorova, Dassia

2016-12-20

The multi-dimensional electronic spectroscopy of ultrafast nuclear dynamics at conical intersections (CI) is an emerging field of investigation, which profits also from the recent extension of the techniques to the UV domain. We present a detailed computational study of oscillatory signatures in two-dimensional (2D) photon-echo spectroscopy (also known as 2D electronic spectroscopy, 2DES) for the two-mode pyrazine model with dissipation. Conventional 2D signals as well as the resulting beating maps are considered. Although of a reduced character, the model captures quite well all the main signatures of the excited-state dynamics of the molecule. Due to the ultrafast relaxation via the CI and no excited-state absorption from the low-lying dark state, the oscillatory components of the signal are found to be predominantly determined by the ground state bleach contribution. They reflect, therefore, the ground-state vibrational coherence induced in the Raman active mode. Beating maps provide a way to experimentally differentiate between ground state bleach and stimulated emission oscillatory components. The ultrafast decay of the latter constitutes a clear indirect signature of the CI. In the considered model, because of the sign properties of the involved transition dipole moments, the dominance of the ground-state coherence leads to anti-correlated oscillations of cross peaks located at symmetric positions with respect to the main diagonal.

Collapse arresting in an inhomogeneous two-dimensional nonlinear Schrodinger model

DEFF Research Database (Denmark)

Schjødt-Eriksen, Jens; Gaididei, Yuri Borisovich; Christiansen, Peter Leth

2001-01-01

Collapse of (2 + 1)-dimensional beams in the inhomogeneous two-dimensional cubic nonlinear Schrodinger equation is analyzed numerically and analytically. It is shown that in the vicinity of a narrow attractive inhomogeneity, the collapse of beams that in a homogeneous medium would collapse may...

Dynamics of a neuron model in different two-dimensional parameter-spaces

International Nuclear Information System (INIS)

Rech, Paulo C.

2011-01-01

We report some two-dimensional parameter-space diagrams numerically obtained for the multi-parameter Hindmarsh-Rose neuron model. Several different parameter planes are considered, and we show that regardless of the combination of parameters, a typical scenario is preserved: for all choice of two parameters, the parameter-space presents a comb-shaped chaotic region immersed in a large periodic region. We also show that exist regions close these chaotic region, separated by the comb teeth, organized themselves in period-adding bifurcation cascades. - Research highlights: → We report parameter-spaces obtained for the Hindmarsh-Rose neuron model. → Regardless of the combination of parameters, a typical scenario is preserved. → The scenario presents a comb-shaped chaotic region immersed in a periodic region. → Periodic regions near the chaotic region are in period-adding bifurcation cascades.

Theory of the one- and two-dimensional electron gas

International Nuclear Information System (INIS)

Emery, V.J.

1987-01-01

Two topics are discussed: (1) the competition between 2k/sub F/ and 4k/sub F/ charge state waves in a one-dimensional electron gas and (2) a two-dimensional model of high T/sub c/ superconductivity in the oxides

Modeling of thin-walled structures interacting with acoustic media as constrained two-dimensional continua

Science.gov (United States)

Rabinskiy, L. N.; Zhavoronok, S. I.

2018-04-01

The transient interaction of acoustic media and elastic shells is considered on the basis of the transition function approach. The three-dimensional hyperbolic initial boundary-value problem is reduced to a two-dimensional problem of shell theory with integral operators approximating the acoustic medium effect on the shell dynamics. The kernels of these integral operators are determined by the elementary solution of the problem of acoustic waves diffraction at a rigid obstacle with the same boundary shape as the wetted shell surface. The closed-form elementary solution for arbitrary convex obstacles can be obtained at the initial interaction stages on the background of the so-called “thin layer hypothesis”. Thus, the shell–wave interaction model defined by integro-differential dynamic equations with analytically determined kernels of integral operators becomes hence two-dimensional but nonlocal in time. On the other hand, the initial interaction stage results in localized dynamic loadings and consequently in complex strain and stress states that require higher-order shell theories. Here the modified theory of I.N.Vekua–A.A.Amosov-type is formulated in terms of analytical continuum dynamics. The shell model is constructed on a two-dimensional manifold within a set of field variables, Lagrangian density, and constraint equations following from the boundary conditions “shifted” from the shell faces to its base surface. Such an approach allows one to construct consistent low-order shell models within a unified formal hierarchy. The equations of the N th-order shell theory are singularly perturbed and contain second-order partial derivatives with respect to time and surface coordinates whereas the numerical integration of systems of first-order equations is more efficient. Such systems can be obtained as Hamilton–de Donder–Weyl-type equations for the Lagrangian dynamical system. The Hamiltonian formulation of the elementary N th-order shell theory is

Two-dimensional modeling of conduction-mode laser welding

International Nuclear Information System (INIS)

Russo, A.J.

1984-01-01

WELD2D is a two-dimensional finite difference computer program suitable for modeling the conduction-mode welding process when the molten weld pool motion can be neglected. The code is currently structured to treat butt-welded geometries in a plane normal to the beam motion so that dissimilar materials may be considered. The surface heat transfer models used in the code include a Gaussian beam or uniform laser source, and a free electron theory reflectance calculation. Temperature-dependent material parameters are used in the reflectance calculation. Measured cold reflection data are used to include surface roughness or oxide effects until melt occurs, after which the surface is assumed to be smooth and clean. Blackbody reradiation and a simple natural convection model are also included in the upper surface boundary condition. Either an implicit or explicit finite-difference representation of the heat conduction equation in an enthalpy form is solved at each time step. This enables phase transition energies to be easily and accurately incorporated into the formulation. Temperature-dependent 9second-order polynominal dependence) thermal conductivities are used in the conduction calculations. Constant values of specific heat are used for each material phase. At present, material properties for six metals are included in the code. These are: aluminium, nickel, steel, molybdenum, copper and silicon

The emissions of monoaromatic hydrocarbons from small polymeric toys placed in chocolate food products.

Science.gov (United States)

Marć, Mariusz; Formela, Krzysztof; Klein, Marek; Namieśnik, Jacek; Zabiegała, Bożena

2015-10-15

The article presents findings on the emissions of selected monoaromatic hydrocarbons from children's toys placed in chocolate food products. The emission test system involved the application of a new type of microscale stationary emission chamber, μ-CTE™ 250. In order to determine the type of the applied polymer in the manufacture of the tested toys, Fourier transform infrared spectroscopy and thermogravimetric analysis coupled with differential scanning calorimetry were used. It was found that the tested toy components or the whole toys (figurines) are made of two main types of polymers: polyamide and acrylonitrile-butadiene-styrene copolymer. Total number of studied small polymeric toys was 52. The average emissions of selected monoaromatic hydrocarbons from studied toys made of polyamide were as follows: benzene: 0.45 ± 0.33 ng/g; toluene: 3.3 ± 2.6 ng/g; ethylbenzene: 1.4 ± 1.4 ng/g; p,m-xylene: 2.5 ± 4.5 ng/g; and styrene: 8.2 ± 9.9 ng/g. In the case of studied toys made of acrylonitrile-butadiene-styrene copolymer the average emissions of benzene, toluene, ethylbeznene, p,m-xylene and styrene were: 0.31 ± 0.29 ng/g; 2.5 ± 1.4 ng/g; 4.6 ± 8.9 ng/g; 1.4 ± 1.1 ng/g; and 36 ± 44 ng/g, respectively. Copyright © 2015. Published by Elsevier B.V.

Security and Privacy Analyses of Internet of Things Toys

OpenAIRE

Chu, Gordon; Apthorpe, Noah; Feamster, Nick

2018-01-01

This paper investigates the security and privacy of Internet-connected children's smart toys through case studies of three commercially-available products. We conduct network and application vulnerability analyses of each toy using static and dynamic analysis techniques, including application binary decompilation and network monitoring. We discover several publicly undisclosed vulnerabilities that violate the Children's Online Privacy Protection Rule (COPPA) as well as the toys' individual pr...

Philosophical Toys Today

Czech Academy of Sciences Publication Activity Database

Dvořák, Tomáš

2013-01-01

Roč. 35, č. 2 (2013), s. 173-196 ISSN 1210-0250 R&D Projects: GA ČR(CZ) GAP401/11/2338 Institutional support: RVO:67985955 Keywords : philosophical toys * scientific instruments * modern visual culture Subject RIV: AA - Philosophy ; Religion

Hyperkaehlerian manifolds and exact β functions of two-dimensional N=4 supersymmetric σ models

International Nuclear Information System (INIS)

Morozov, A.Yu.; Perelomov, A.M.

1984-01-01

Two-dimensional supersymmetric sigma-models on cotangent bundles over CPsup(n) are investigated. These mannfolds are supplied with hyperkaehlerian metrics, and the corresponding σ-models possess N=4 supersymmetry. Also they admit instantonic solutions, which permits to apply the Novikov-Shifman-Vainshtein-Zakharov method and calculate exact β-functions. βsup(gsup(2)) = 0, as was expected

The background-quantum split symmetry in two-dimensional σ-models

International Nuclear Information System (INIS)

Blasi, A.; Delduc, F.; Sorella, S.P.

1989-01-01

A generic, non-linear, background-quantum split is translated into a BRS symmetry. The renormalization of the resulting Slavnov-Taylor identity is analyzed in the class of two-dimensional σ-models with Wess-Zumino term which suggests the adoption of a regularization independent method. We discuss the cohomology of the linearized nilpotent operator derived from the Slavnov-Taylor identity. In particular, the cohomology class with zero Faddeev-Popov charge ensures the stability of the action, while the fact that the cohomology class with one unit of Faddeev-Popov charge is empty ensures the absence of anomalies. (orig.)

Renormalization group flows in σ-models coupled to two-dimensional dynamical gravity

International Nuclear Information System (INIS)

Penati, S.; Santambrogio, A.; Zanon, D.

1997-01-01

We consider a bosonic σ-model coupled to two-dimensional gravity. In the semiclassical limit, c→-∞, we compute the gravity dressing of the β-functions at two-loop order in the matter fields. We find that the corrections due to the presence of dynamical gravity are not expressible simply in terms of a multiplicative factor as previously obtained at the one-loop level. Our result indicates that the critical points of the theory are non-trivially influenced and modified by the induced gravity. (orig.)

Bayesian decision theory : A simple toy problem

NARCIS (Netherlands)

van Erp, H.R.N.; Linger, R.O.; van Gelder, P.H.A.J.M.

2016-01-01

We give here a comparison of the expected outcome theory, the expected utility theory, and the Bayesian decision theory, by way of a simple numerical toy problem in which we look at the investment willingness to avert a high impact low probability event. It will be found that for this toy problem

Investigating the obesogenic effects of marketing snacks with toys: an experimental study in Latin America.

Science.gov (United States)

Gregori, Dario; Ballali, Simonetta; Gafare, Claudia Elena; Casella, Adriana; Stefanini, Giulia; de Sousa Alves, Rogenia; Franchin, Laura; Amador, Ignacio; Da Silva, Neila Maria Almedia; Dibildox, Javier

2013-07-10

The inclusion of toys in food packages is a common marketing practice, and it is suspected of promoting obesogenic behaviours. This study aimed to determine whether toys packaged with food are indeed increasing the amount of food eaten by children, and if this effect is enhanced by contemporary exposure to TV and/or advertising. A total of 600 children (balanced according to gender and age groups, 3-6 and 7-10 years old) were randomized in three school facilities in Argentina, Brazil and Mexico and exposed to food (snacks) alone or food associated with toys in an experimental setting. All of the children received the same meal at lunchtime. The products were packages in which chocolate was associated with toys in an egg-shaped container partially filled by chocolate. The children were asked to eat ad libitum for 20 minutes during the afternoon break. In addition, the children were randomized into two groups and either shown or not shown a movie cartoon, with three different levels of exposure to commercials in the TV viewing condition (1, 2 or 3 advertisements). No significant differences emerged between the "toys" and "no toys" groups even after taking into account exposure to TV, commercials and other confounding factors. The inclusion of toys in food packages was not shown per se to lead to an increase in the caloric intake of children.

Analytical Chemical Control of Phthalates in Toys

DEFF Research Database (Denmark)

Rastogi, S. C.; Jensen, G. H.; Worsøe, I. M.

The content of phthalates in toys and other articles for children up to 3 years of age is regulated by the Statutory Order of Danish Ministry of Environment and Energy, No. 151 of 15th March 1999. In the present investigation, 35 products (toys and other articles for children up to 3 years of age...

Analytical Chemical Control of Phthalates in Toys

DEFF Research Database (Denmark)

Rastogi, S. C.; Worsøe, I. M.

The content of phthalates in toys and other articles for children up to 3 years of age is regulated by the Statutory Order of Danish Ministry of Environment and Energy, No. 151 of 15th March 1999. In the present investigation, 20 products (toys and other articles for children up to 3 years of age...

SEMICONDUCTOR DEVICES: Two-dimensional threshold voltage analytical model of DMG strained-silicon-on-insulator MOSFETs

Science.gov (United States)

Jin, Li; Hongxia, Liu; Bin, Li; Lei, Cao; Bo, Yuan

2010-08-01

For the first time, a simple and accurate two-dimensional analytical model for the surface potential variation along the channel in fully depleted dual-material gate strained-Si-on-insulator (DMG SSOI) MOSFETs is developed. We investigate the improved short channel effect (SCE), hot carrier effect (HCE), drain-induced barrier-lowering (DIBL) and carrier transport efficiency for the novel structure MOSFET. The analytical model takes into account the effects of different metal gate lengths, work functions, the drain bias and Ge mole fraction in the relaxed SiGe buffer. The surface potential in the channel region exhibits a step potential, which can suppress SCE, HCE and DIBL. Also, strained-Si and SOI structure can improve the carrier transport efficiency, with strained-Si being particularly effective. Further, the threshold voltage model correctly predicts a “rollup" in threshold voltage with decreasing channel length ratios or Ge mole fraction in the relaxed SiGe buffer. The validity of the two-dimensional analytical model is verified using numerical simulations.

Distal antebrachial fractures in toy-breed dogs

International Nuclear Information System (INIS)

Muir, P.

1997-01-01

Antebrachial fractures account for approximately 17% of all canine fractures, with motor vehicle trauma cited as one of the primary causes. However, antebrachial fractures in toy-breed dogs are often sustained after apparently minimal trauma, such as jumping or falling, and are usually distal. The cause of antebrachial fractures in toy breeds is not well understood. Complications after treatment of distal antebrachial fractures in toy-breed dogs, including delayed union, nonunion, and malunion, are common and are potentially serious because they may necessitate limb amputation. This article reports on distal antebrachial fractures in 26 toy-breed dogs that wee presented to the University of California, Davis, Veterinary Medical Teaching Hospital from April 1987 to March 1996. The author found that (1) these fractures typically occur in growing or adolescent dogs; (2) the presence of complications of union is typically associated with prior treatment using intramedullary pinning or external coaptation; and (3) successful healing of this type of fracture is obtained via rigid stabilization with bone plating in combination with cancellous bone autograft

Smart Toys Designed for Detecting Developmental Delays.

Science.gov (United States)

Rivera, Diego; García, Antonio; Alarcos, Bernardo; Velasco, Juan R; Ortega, José Eugenio; Martínez-Yelmo, Isaías

2016-11-20

In this paper, we describe the design considerations and implementation of a smart toy system, a technology for supporting the automatic recording and analysis for detecting developmental delays recognition when children play using the smart toy. To achieve this goal, we take advantage of the current commercial sensor features (reliability, low consumption, easy integration, etc.) to develop a series of sensor-based low-cost devices. Specifically, our prototype system consists of a tower of cubes augmented with wireless sensing capabilities and a mobile computing platform that collect the information sent from the cubes allowing the later analysis by childhood development professionals in order to verify a normal behaviour or to detect a potential disorder. This paper presents the requirements of the toy and discusses our choices in toy design, technology used, selected sensors, process to gather data from the sensors and generate information that will help in the decision-making and communication of the information to the collector system. In addition, we also describe the play activities the system supports.

Smart Toys Designed for Detecting Developmental Delays

Directory of Open Access Journals (Sweden)

Diego Rivera

2016-11-01

Full Text Available In this paper, we describe the design considerations and implementation of a smart toy system, a technology for supporting the automatic recording and analysis for detecting developmental delays recognition when children play using the smart toy. To achieve this goal, we take advantage of the current commercial sensor features (reliability, low consumption, easy integration, etc. to develop a series of sensor-based low-cost devices. Specifically, our prototype system consists of a tower of cubes augmented with wireless sensing capabilities and a mobile computing platform that collect the information sent from the cubes allowing the later analysis by childhood development professionals in order to verify a normal behaviour or to detect a potential disorder. This paper presents the requirements of the toy and discusses our choices in toy design, technology used, selected sensors, process to gather data from the sensors and generate information that will help in the decision-making and communication of the information to the collector system. In addition, we also describe the play activities the system supports.

Dilaton quantum cosmology in two dimensions

International Nuclear Information System (INIS)

Mazzitelli, F.D.; Russo, J.G.

1992-11-01

We consider a renormalizable two-dimensional model of dilaton gravity coupled to a set of conformal fields as a toy model for quantum cosmology. We discuss the cosmological solutions of the model and study the effect of including the back reaction due to quantum corrections. As a result, when the matter density is below some threshold new singularities form in a weak coupling region, which suggests that they will not be removed in full quantum theory. We also solve the Wheeler-DeWitt equation. Depending on the quantum state of the Universe, the singularities may appear in a quantum region where the wave function is not oscillatory, i.e., when there is not a well defined notion of classical spacetime. (author). 29 refs, 4 figs

Computer simulation of the martensite transformation in a model two-dimensional body

International Nuclear Information System (INIS)

Chen, S.; Khachaturyan, A.G.; Morris, J.W. Jr.

1979-05-01

An analytical model of a martensitic transformation in an idealized body is constructed and used to carry out a computer simulation of the transformation in a pseudo-two-dimensional crystal. The reaction is assumed to proceed through the sequential transformation of elementary volumes (elementary martensitic particles, EMP) via the Bain strain. The elastic interaction between these volumes is computed and the transformation path chosen so as to minimize the total free energy. The model transformation shows interesting qualitative correspondencies with the known features of martensitic transformations in typical solids

Computer simulation of the martensite transformation in a model two-dimensional body

International Nuclear Information System (INIS)

Chen, S.; Khachaturyan, A.G.; Morris, J.W. Jr.

1979-06-01

An analytical model of a martensitic transformation in an idealized body is constructed and used to carry out a computer simulation of the transformation in a pseudo-two-dimensional crystal. The reaction is assumed to proceed through the sequential transformation of elementary volumes (elementary martensitic particles, EMP) via the Bain strain. The elastic interaction between these volumes is computed and the transformation path chosen so as to minimize the total free energy. The model transformation shows interesting qualitative correspondencies with the known features of martensitic transformations in typical solids

Dynamics of a two-dimensional discrete-time SIS model

Directory of Open Access Journals (Sweden)

Jaime H. Barrera

2012-04-01

Full Text Available We analyze a two-dimensional discrete-time SIS model with a non-constant total population. Our goal is to determine the interaction between the total population, the susceptible class and the infective class, and the implications this may have for the disease dynamics. Utilizing a constant recruitment rate in the susceptible class, it is possible to assume the existence of an asymptotic limiting equation, which enables us to reduce the system of, two-equations into a single, dynamically equivalent equation. In this case, we are able to demonstrate the global stability of the disease-free and the endemic equilibria when the basic reproductive number (Ro is less than one and greater than one, respectively. When we consider a non-constant recruitment rate, the total population bifurcates as we vary the birth rate and the death rate. Using computer simulations, we observe different behavior among the infective class and the total population, and possibly, the occurrence of a strange attractor.

Phase transitions in two-dimensional uniformly frustrated XY models. II. General scheme

International Nuclear Information System (INIS)

Korshunov, S.E.

1986-01-01

For two-dimensional uniformly frustrated XY models the group of symmetry spontaneously broken in the ground state is a cross product of the group of two-dimensional rotations by some discrete group of finite order. Different possibilities of phase transitions in such systems are investigated. The transition to the Coulomb gas with noninteger charges is widely used when analyzing the properties of relevant topological excitations. The number of these excitations includes not only domain walls and traditional (integer) vortices, but also vortices with a fractional number of circulation quanta which are to be localized at bends and intersections of domain walls. The types of possible phase transitions prove to be dependent on their relative sequence: in the case the vanishing of domain wall free energy occurs earlier (at increasing temperature) than the dissociation of pairs of ordinary vortices, the second phase transition is to be associated with dissociation of pairs of fractional vortices. The general statements are illustrated with a number of examples

Toys, sociocognitive traits, and occupations: Italian children's endorsement of gender stereotypes.

Science.gov (United States)

De Caroli, Maria Elvira; Sagone, Elisabetta

2007-06-01

In a sample of 136 Italian children ages 8 to 12 years (M = 9.6, SD = 1.2; 68 boys, 68 girls), gender stereotypes related to gender-typed toys, traits, and occupational choices were examined, using the forced-choice technique between a male and a female silhouette. Stereotypy was established considering boys' and girls' choices for the 70%-100% range. Differences in gender stereotyping for age and sex of participants were verified. Analysis indicated children attributed toys prevalently connected with aesthetic aspect and domestic activities to the female silhouette, while technology, warfare, locomotion, and construction toys were attributed to the male. Children attributed physical and verbal aggressiveness and dominance to the male silhouette; the female profile was exclusively characterized by sweetness. The occupational stereotypical male model was structured in both practical-manual activities and of highly cultural and specialist relevance, while for the female model the number of activities, mainly of a domestic type, were reduced. Significant main effect of sex of children was found, but no significant age-related differences in the three domains. Results were discussed within the framework of gender-stereotype theories.

Two-dimensional and three-dimensional models used for teaching Human Evolution in Secondary Schools. Learning proficiency assessment. A Case Study

Directory of Open Access Journals (Sweden)

Ulisses Dardon

2016-06-01

Full Text Available The evolution of the human species is a topic of extreme importance reported in the “Parâmetros Curriculares Nacionais do Ensino Médio – PCNEM” (National Curriculum Standards of Secondary Education, although it is not often taught as part of basic education. This work presents the results of an experimental work performed with 31 students of a religious high school of State of Rio de Janeiro. Learning proficiency was assessed by using two-dimensional (2D and three-dimensional (3D illustration techniques of hominids skulls and a Pongidae for teaching Human Evolution. The teaching-learning process using these methodologies was more effective with the application of three-dimensional (3D illustration techniques. The group of students that used 3D illustrations were able to observe similarities and differences between the presented taxonomic models, and formulate hypotheses about their palaeobiology more consistently than the students that used 2D models. Results of this work indicate that the use of three-dimensional techniques (3D provides an excellent support to teaching-learning process in basic education, captivating and stimulating new interests of students during the educational process.

2d Model Field Theories at Finite Temperature and Density

OpenAIRE

Schoen, Verena; Thies, Michael

2000-01-01

In certain 1+1 dimensional field theoretic toy models, one can go all the way from microscopic quarks via the hadron spectrum to the properties of hot and dense baryonic matter in an essentially analytic way. This "miracle" is illustrated through case studies of two popular large N models, the Gross-Neveu and the 't Hooft model - caricatures of the Nambu-Jona-Lasinio model and real QCD, respectively. The main emphasis will be on aspects related to spontaneous symmetry breaking (discrete or co...

Toys as Tools for Skill-building and Creativity in Adult Life

Directory of Open Access Journals (Sweden)

Katriina Heljakka

2015-11-01

Full Text Available Previous understandings of adult use of toys are connected with ideas of collecting and hobbying, not playing. This study aims to address toys as play objects employed in imaginative scenarios and as learning devices. This article situates toys (particularly, character toys such as Blythe dolls as socially shared tools for skill-building and learning in adult life. The interviews with Finnish doll players and analyses of examples of their productive, toy-related play patterns showcased in both offline and digital playscapes reveal how toy play leads to skill-building and creativity at a mature age.The meanings attached to and developed around playthings expand purposely by means of digital and social media. (Audiovisual content-sharing platforms, such as Flickr, Pinterest, Instagram and YouTube, invite mature audiences to join playful dialogues involving mass-produced toys enhanced through do-it-yourself practices. Activities circulated in digital play spaces, such as blogs and photo management applications, demonstrate how adults, as non-professional ‘everyday players’, approach, manipulate and creatively cultivate contemporary playthings. Mature players educate potential players by introducing how to use and develop skills by sharing play patterns associated with their playthings. Producing and broadcasting tutorials on how to play creatively with toys encourage others to build their skills through play.

Discrete elastic model for two-dimensional melting.

Science.gov (United States)

Lansac, Yves; Glaser, Matthew A; Clark, Noel A

2006-04-01

We present a network model for the study of melting and liquid structure in two dimensions, the first in which the presence and energy of topological defects (dislocations and disclinations) and of geometrical defects (elemental voids) can be independently controlled. Interparticle interaction is via harmonic springs and control is achieved by Monte Carlo moves which springs can either be orientationally "flipped" between particles to generate topological defects, or can be "popped" in force-free shape, to generate geometrical defects. With the geometrical defects suppressed the transition to the liquid phase occurs via disclination unbinding, as described by the Kosterlitz-Thouless-Halperin-Nelson-Young model and found in soft potential two-dimensional (2D) systems, such as the dipole-dipole potential [H. H. von Grünberg, Phys. Rev. Lett. 93, 255703 (2004)]. By contrast, with topological defects suppressed, a disordering transition, the Glaser-Clark condensation of geometrical defects [M. A. Glaser and N. A. Clark, Adv. Chem. Phys. 83, 543 (1993); M. A. Glaser, (Springer-Verlag, Berlin, 1990), Vol. 52, p. 141], produces a state that accurately characterizes the local liquid structure and first-order melting observed in hard-potential 2D systems, such as hard disk and the Weeks-Chandler-Andersen (WCA) potentials (M. A. Glaser and co-workers, see above). Thus both the geometrical and topological defect systems play a role in melting. The present work introduces a system in which the relative roles of topological and geometrical defects and their interactions can be explored. We perform Monte Carlo simulations of this model in the isobaric-isothermal ensemble, and present the phase diagram as well as various thermodynamic, statistical, and structural quantities as a function of the relative populations of geometrical and topological defects. The model exhibits a rich phase behavior including hexagonal and square crystals, expanded crystal, dodecagonal quasicrystal

Solitary excitations in discrete two-dimensional nonlinear Schrodinger models with dispersive dipole-dipole interactions

DEFF Research Database (Denmark)

Christiansen, Peter Leth; Gaididei, Yuri Borisovich; Johansson, M.

1998-01-01

The dynamics of discrete two-dimensional nonlinear Schrodinger models with long-range dispersive interactions is investigated. In particular, we focus on the cases where the dispersion arises from a dipole-dipole interaction, assuming the dipole moments at each lattice site to be aligned either...

Two-phase flow models

International Nuclear Information System (INIS)

Delaje, Dzh.

1984-01-01

General hypothesis used to simplify the equations, describing two-phase flows, are considered. Two-component and one-component models of two-phase flow, as well as Zuber and Findlay model for actual volumetric steam content, and Wallis model, describing the given phase rates, are presented. The conclusion is made, that the two-component model, in which values averaged in time are included, is applicable for the solving of three-dimensional tasks for unsteady two-phase flow. At the same time, using the two-component model, including values, averaged in space only one-dimensional tasks for unsteady two-phase flow can be solved

A non-perturbative approach to strings

International Nuclear Information System (INIS)

Orland, P.

1986-03-01

After briefly reviewing the theory of strings in the light-cone gauge, a lattice regularized path integral for the amplitudes is discussed. The emphasis is put on a toy string model; the U(N) Veneziano model in the limit as N->infinite with g 0 2 N fixed. The lattice methods of Giles and Thorn are used extensively, but are found to require modification beyond perturbation theory. The twenty-six-dimensional toy string model is recast as a two-dimensional spin system. (orig.)

Predicting typhoon-induced storm surge tide with a two-dimensional hydrodynamic model and artificial neural network model

Science.gov (United States)

Chen, W.-B.; Liu, W.-C.; Hsu, M.-H.

2012-12-01

Precise predictions of storm surges during typhoon events have the necessity for disaster prevention in coastal seas. This paper explores an artificial neural network (ANN) model, including the back propagation neural network (BPNN) and adaptive neuro-fuzzy inference system (ANFIS) algorithms used to correct poor calculations with a two-dimensional hydrodynamic model in predicting storm surge height during typhoon events. The two-dimensional model has a fine horizontal resolution and considers the interaction between storm surges and astronomical tides, which can be applied for describing the complicated physical properties of storm surges along the east coast of Taiwan. The model is driven by the tidal elevation at the open boundaries using a global ocean tidal model and is forced by the meteorological conditions using a cyclone model. The simulated results of the hydrodynamic model indicate that this model fails to predict storm surge height during the model calibration and verification phases as typhoons approached the east coast of Taiwan. The BPNN model can reproduce the astronomical tide level but fails to modify the prediction of the storm surge tide level. The ANFIS model satisfactorily predicts both the astronomical tide level and the storm surge height during the training and verification phases and exhibits the lowest values of mean absolute error and root-mean-square error compared to the simulated results at the different stations using the hydrodynamic model and the BPNN model. Comparison results showed that the ANFIS techniques could be successfully applied in predicting water levels along the east coastal of Taiwan during typhoon events.

Interaction Deep Excavation Adjacent Structure Numerical Two and Three Dimensional Modeling

International Nuclear Information System (INIS)

Abdallah, M.; Chehade, F. H.; Chehade, W.; Fawaz, A.

2011-01-01

Urban development often requires the construction of deep excavations near to buildings or other structures. We have to study complex material structure interactions where we should take into consideration several particularities. In this paper, we perform a numerical modeling with the finite element method, using PLAXIS software, of the interaction deep excavation-diaphragm wall-soil-structure in the case of non linear soil behavior. We focus our study on a comparison of the results given respectively by two and three dimensional modelings. This allows us to give some recommendations concerning the validity of twodimensional study. We perform a parametric study according to the initial loading on the structure and the struts number. (author)

Testing for lead in toys at day care centers.

Science.gov (United States)

Sanders, Martha; Stolz, Julie; Chacon-Baker, Ashley

2013-01-01

Exposure to lead-based paint or material has been found to impact children's cognitive and behavioral development at blood lead levels far below current standards. The purpose of the project was to screen for lead in toy items in daycare centers in order to raise awareness of inside environmental lead exposures and minimize lead-based exposures for children. Occupational therapy students in a service learning class tested for lead in ten daycare or public centers using the XRF Thermo Scientific Niton XL3t, a method accepted by the Consumer Product Safety Commission (CPSC). A total of 460 items were tested over a two-month period for an average of 66 toys per setting. Fifty six (56) items tested > 100 ppm, which represented 12% of the entire sample. Items with high lead levels included selected toys constructed with lead-based paint, lead metals, plastics using lead as a color enhancer, and decorative objects. While the actual number of lead-based products is small, the cumulative exposure or habitual use may pose an unnecessary risk to children. Indoor exposures occurred for all day care centers regardless of socio-economic levels. Recommendations to minimize exposures are provided.

Multi-dimensional virtual system introduced to enhance canonical sampling

Science.gov (United States)

Higo, Junichi; Kasahara, Kota; Nakamura, Haruki

2017-10-01

When an important process of a molecular system occurs via a combination of two or more rare events, which occur almost independently to one another, computational sampling for the important process is difficult. Here, to sample such a process effectively, we developed a new method, named the "multi-dimensional Virtual-system coupled Monte Carlo (multi-dimensional-VcMC)" method, where the system interacts with a virtual system expressed by two or more virtual coordinates. Each virtual coordinate controls sampling along a reaction coordinate. By setting multiple reaction coordinates to be related to the corresponding rare events, sampling of the important process can be enhanced. An advantage of multi-dimensional-VcMC is its simplicity: Namely, the conformation moves widely in the multi-dimensional reaction coordinate space without knowledge of canonical distribution functions of the system. To examine the effectiveness of the algorithm, we introduced a toy model where two molecules (receptor and its ligand) bind and unbind to each other. The receptor has a deep binding pocket, to which the ligand enters for binding. Furthermore, a gate is set at the entrance of the pocket, and the gate is usually closed. Thus, the molecular binding takes place via the two events: ligand approach to the pocket and gate opening. In two-dimensional (2D)-VcMC, the two molecules exhibited repeated binding and unbinding, and an equilibrated distribution was obtained as expected. A conventional canonical simulation, which was 200 times longer than 2D-VcMC, failed in sampling the binding/unbinding effectively. The current method is applicable to various biological systems.

Exactly solvable model of the two-dimensional electrical double layer.

Science.gov (United States)

Samaj, L; Bajnok, Z

2005-12-01

We consider equilibrium statistical mechanics of a simplified model for the ideal conductor electrode in an interface contact with a classical semi-infinite electrolyte, modeled by the two-dimensional Coulomb gas of pointlike unit charges in the stability-against-collapse regime of reduced inverse temperatures 0layer) carries some nonzero surface charge density. The model is mappable onto an integrable semi-infinite sine-Gordon theory with Dirichlet boundary conditions. The exact form-factor and boundary state information gained from the mapping provide asymptotic forms of the charge and number density profiles of electrolyte particles at large distances from the interface. The result for the asymptotic behavior of the induced electric potential, related to the charge density via the Poisson equation, confirms the validity of the concept of renormalized charge and the corresponding saturation hypothesis. It is documented on the nonperturbative result for the asymptotic density profile at a strictly nonzero beta that the Debye-Hückel beta-->0 limit is a delicate issue.

Metal Construction Toys of the Early Twentieth Century: Their Astronomical Applications

Science.gov (United States)

Rumstay, K. S.

2004-12-01

During the early twentieth century several toy manufacturers around the globe introduced construction toys in the form of sets of metal parts which could be assembled into a variety of models. The two most successful were the Erector Set, introduced in the United States by A.C. Gilbert in 1913, and the Meccano Set, patented in 1901 in England by Frank Hornby. Whereas the Erector Set never developed beyond being a child's toy, Hornby envisioned his Meccano system as providing a way to teach principles of mechanical engineering to young schoolboys. Indeed, his sets were first marketed under the name "Mechanics Made Easy", and were endorsed by Dr. H.S. Hele-Shaw, Head of the Engineering Department at Liverpool University. Popularity of the new Meccano sets spread throughout the world, spawning the formation of numerous amateur societies composed of adolescent boys and an increasing number of adult hobbyists. The variety of parts increased during the first third of the century, and increasingly sophisticated models were constructed and exhibited in competitive events. Among these were several clocks of remarkable accuracy, and at least one equatorial mounting for a small astronomical telescope. At the same time, many university science and engineering departments found these interchangeable metal parts invaluable in the construction of experimental apparatus. In 1934 a small-scale replica of Vannevar Bush's Differential Analyzer was constructed at the University of Manchester, and used for many years to perform mathematical computations. The introduction in 1928 of a flanged ring with 73 (a sub-multiple of 365) teeth allowed for construction of accurate orreries and astronomical clocks. The most remarkable of these was the Astronomical Clock constructed in the period 1924-1932 by M. Alexandre Rahm of Paris.

Chimera patterns in two-dimensional networks of coupled neurons

Science.gov (United States)

Schmidt, Alexander; Kasimatis, Theodoros; Hizanidis, Johanne; Provata, Astero; Hövel, Philipp

2017-03-01

We discuss synchronization patterns in networks of FitzHugh-Nagumo and leaky integrate-and-fire oscillators coupled in a two-dimensional toroidal geometry. A common feature between the two models is the presence of fast and slow dynamics, a typical characteristic of neurons. Earlier studies have demonstrated that both models when coupled nonlocally in one-dimensional ring networks produce chimera states for a large range of parameter values. In this study, we give evidence of a plethora of two-dimensional chimera patterns of various shapes, including spots, rings, stripes, and grids, observed in both models, as well as additional patterns found mainly in the FitzHugh-Nagumo system. Both systems exhibit multistability: For the same parameter values, different initial conditions give rise to different dynamical states. Transitions occur between various patterns when the parameters (coupling range, coupling strength, refractory period, and coupling phase) are varied. Many patterns observed in the two models follow similar rules. For example, the diameter of the rings grows linearly with the coupling radius.

Two-Dimensional Model Test Study of New Western Breakwater Proposal for Port of Hanstholm

OpenAIRE

Eldrup, Mads Røge; Andersen, Thomas Lykke

2016-01-01

The present report presents results from a two-dimensional model test study carried out at Aalborg University in December 2016 with the proposed trunk section for the new western breakwater in Port of Hanstholm. The objectives of the model tests were to study the stability of the armour layer, toe erosion, overtopping and transmission. The scale used for the model tests was 1:61.5. Unless otherwise specified all values given in this report are prototype values converted from the model to prot...

Coexistence of incommensurate magnetism and superconductivity in the two-dimensional Hubbard model

Energy Technology Data Exchange (ETDEWEB)

Yamase, Hiroyuki [Max Planck Institute for Solid State Research, Stuttgart (Germany); National Institute for Materials Science, Tsukuba (Japan); Eberlein, Andreas [Max Planck Institute for Solid State Research, Stuttgart (Germany); Department of Physics, Harvard University, Cambridge (United States); Metzner, Walter [Max Planck Institute for Solid State Research, Stuttgart (Germany)

2016-07-01

We analyze the competition of magnetism and superconductivity in the two-dimensional Hubbard model with a moderate interaction strength, including the possibility of incommensurate spiral magnetic order. Using an unbiased renormalization group approach, we compute magnetic and superconducting order parameters in the ground state. In addition to previously established regions of Neel order coexisting with d-wave superconductivity, the calculations reveal further coexistence regions where superconductivity is accompanied by incommensurate magnetic order.

Multi-dimensional rheology-based two-phase model for sediment transport and applications to sheet flow and pipeline scour

International Nuclear Information System (INIS)

Lee, Cheng-Hsien; Low, Ying Min; Chiew, Yee-Meng

2016-01-01

Sediment transport is fundamentally a two-phase phenomenon involving fluid and sediments; however, many existing numerical models are one-phase approaches, which are unable to capture the complex fluid-particle and inter-particle interactions. In the last decade, two-phase models have gained traction; however, there are still many limitations in these models. For example, several existing two-phase models are confined to one-dimensional problems; in addition, the existing two-dimensional models simulate only the region outside the sand bed. This paper develops a new three-dimensional two-phase model for simulating sediment transport in the sheet flow condition, incorporating recently published rheological characteristics of sediments. The enduring-contact, inertial, and fluid viscosity effects are considered in determining sediment pressure and stresses, enabling the model to be applicable to a wide range of particle Reynolds number. A k − ε turbulence model is adopted to compute the Reynolds stresses. In addition, a novel numerical scheme is proposed, thus avoiding numerical instability caused by high sediment concentration and allowing the sediment dynamics to be computed both within and outside the sand bed. The present model is applied to two classical problems, namely, sheet flow and scour under a pipeline with favorable results. For sheet flow, the computed velocity is consistent with measured data reported in the literature. For pipeline scour, the computed scour rate beneath the pipeline agrees with previous experimental observations. However, the present model is unable to capture vortex shedding; consequently, the sediment deposition behind the pipeline is overestimated. Sensitivity analyses reveal that model parameters associated with turbulence have strong influence on the computed results.

Cavity-ligand binding in a simple two-dimensional water model

Directory of Open Access Journals (Sweden)

G. Mazovec

2016-02-01

Full Text Available By means of Monte Carlo computer simulations in the isothermal-isobaric ensemble, we investigated the interaction of a hydrophobic ligand with the hydrophobic surfaces of various curvatures (planar, convex and concave. A simple two-dimensional model of water, hydrophobic ligand and surface was used. Hydration/dehidration phenomena concerning water molecules confined close to the molecular surface were investigated. A notable dewetting of the hydrophobic surfaces was observed together with the reorientation of the water molecules close to the surface. The hydrogen bonding network was formed to accommodate cavities next to the surfaces as well as beyond the first hydration shell. The effects were most strongly pronounced in the case of concave surfaces having large curvature. This simplified model can be further used to evaluate the thermodynamic fingerprint of the docking of hydrophobic ligands.

Long-range transmission of pollutants simulated by a two-dimensional pseudospectral dispersion model

International Nuclear Information System (INIS)

Prahm, L.P.; Christensen, O.

1977-01-01

The pseudospectral dispersion model (Christensen and Prahm, 1976) is adapted for simulation of the long-range transmission of sulphur pollutants in the European region, covering an area of about 4000 km x 4000 km. Regional ''background'' concentrations of sulphur oxides are found to be highly dependent on distant sources and to correlate poorly with local source strength during the considered three- and four-day episodes. The simulation is based on emission data, given in squares of about 50 km x 50 km and on synoptic wind fields derived from observed wind velocities of the 850 mb level and the surface level. The two-dimensional model includes a constant vertical mixing depth. Appropriate values for the deposition and the transformation rates of SO 2 and SO/sup 4 are used. The concentration of pollutants computed from the two-dimensional pseudospectral dispersion model reflects the variable meteorological conditions. Computed concentrations are compared with measurements, giving spatial correlations between 0.4 and 0.8 for more than 400 ground-based 24 h mean values, and a spatial correlation of 0.9 for eight aircraft samples averaged over approx.30 min. A discussion of the influence of different sources of error in the model simulation is given. The high numerical accuracy of the pseudospectral model is combined with a modest consumption of CPU computer time. This study is the first application of the pseudospectral dispersion model which compares computed concentrations with measured field data. The model has possible applications as a tool for assessment of the impact of both national and international emission regulation strategies

FireStem2D — A two-dimensional heat transfer model for simulating tree stem injury in fires

Science.gov (United States)

Efthalia K. Chatziefstratiou; Gil Bohrer; Anthony S. Bova; Ravishankar Subramanian; Renato P.M. Frasson; Amy Scherzer; Bret W. Butler; Matthew B. Dickinson

2013-01-01

FireStem2D, a software tool for predicting tree stem heating and injury in forest fires, is a physically-based, two-dimensional model of stem thermodynamics that results from heating at the bark surface. It builds on an earlier one-dimensional model (FireStem) and provides improved capabilities for predicting fire-induced mortality and injury before a fire occurs by...

Characteristics of particulate matter emissions from toy cars with electric motors.

Science.gov (United States)

Wang, Xiaofei; Williams, Brent J; Biswas, Pratim

2015-04-01

Aerosol emissions from toy cars with electric motors were characterized. Particle emission rates from the toy cars, as high as 7.47×10(7) particles/s, were measured. This emission rate is lower than other indoor sources such as smoking and cooking. The particles emitted from toy cars are generated from spark discharges inside the electric motors that power the toy cars. Size distribution measurements indicated that most particles were below 100 nm in diameter. Copper was the dominant inorganic species in these particles. By deploying aerosol mass spectrometers, high concentrations of particulate organic matter were also detected and characterized in detail. Several organic compounds were identified using a thermal desorption aerosol gas chromatography. The mass size distribution of particulate organic matter was bimodal. The formation mechanism of particulate organic matter from toy cars was elucidated. A possible new source of indoor air pollution, particles from electric motors in toy cars, was identified. This study characterized aerosol emissions from toy cars in detail. Most of these particles have a diameter less than 100 nm. Copper and some organics are the major components of these particles. Conditions that minimize these emissions were determined.

Acoustic Wave Propagation Modeling by a Two-dimensional Finite-difference Summation-by-parts Algorithm

Energy Technology Data Exchange (ETDEWEB)

Kim, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Petersson, N. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodgers, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-10-25

Acoustic waveform modeling is a computationally intensive task and full three-dimensional simulations are often impractical for some geophysical applications such as long-range wave propagation and high-frequency sound simulation. In this study, we develop a two-dimensional high-order accurate finite-difference code for acoustic wave modeling. We solve the linearized Euler equations by discretizing them with the sixth order accurate finite difference stencils away from the boundary and the third order summation-by-parts (SBP) closure near the boundary. Non-planar topographic boundary is resolved by formulating the governing equation in curvilinear coordinates following the interface. We verify the implementation of the algorithm by numerical examples and demonstrate the capability of the proposed method for practical acoustic wave propagation problems in the atmosphere.

Two-dimensional hidden semantic information model for target saliency detection and eyetracking identification

Science.gov (United States)

Wan, Weibing; Yuan, Lingfeng; Zhao, Qunfei; Fang, Tao

2018-01-01

Saliency detection has been applied to the target acquisition case. This paper proposes a two-dimensional hidden Markov model (2D-HMM) that exploits the hidden semantic information of an image to detect its salient regions. A spatial pyramid histogram of oriented gradient descriptors is used to extract features. After encoding the image by a learned dictionary, the 2D-Viterbi algorithm is applied to infer the saliency map. This model can predict fixation of the targets and further creates robust and effective depictions of the targets' change in posture and viewpoint. To validate the model with a human visual search mechanism, two eyetrack experiments are employed to train our model directly from eye movement data. The results show that our model achieves better performance than visual attention. Moreover, it indicates the plausibility of utilizing visual track data to identify targets.

Systematic assessment of noise amplitude generated by toys intended for young children.

Science.gov (United States)

Mahboubi, Hossein; Oliaei, Sepehr; Badran, Karam W; Ziai, Kasra; Chang, Janice; Zardouz, Shawn; Shahriari, Shawn; Djalilian, Hamid R

2013-06-01

To systematically evaluate the noise generated by toys targeted for children and to compare the results over the course of 4 consecutive holiday shopping seasons. Experimental study. Academic medical center. During 2008-2011, more than 200 toys marketed for children older than 6 months were screened for loudness. The toys with sound output of more than 80 dBA at speaker level were retested in a soundproof audiometry booth. The generated sound amplitude of each toy was measured at speaker level and at 30 cm away from the speaker. Ninety different toys were analyzed. The mean (SD) noise amplitude was 100 (8) dBA (range, 80-121 dBA) at the speaker level and 80 (11) dBA (range, 60-109 dBA) at 30 cm away from the speaker. Eighty-eight (98%) had more than an 85-dBA noise amplitude at speaker level, whereas 19 (26%) had more than an 85-dBA noise amplitude at a 30-cm distance. Only the mean noise amplitude at 30 cm significantly declined during the studied period (P toys specified for different age groups. Our findings demonstrate the persistence of extremely loud toys marketed for very young children. Acoustic trauma from toys remains a potential risk factor for noise-induced hearing loss in this age group, warranting promotion of public awareness and regulatory considerations for manufacture and marketing of toys.

Two-Dimensional Model Test Study of New Western Breakwater Proposal for Port of Hanstholm

DEFF Research Database (Denmark)

Eldrup, Mads Røge; Andersen, Thomas Lykke

The present report presents results from a two-dimensional model test study carried out at Aalborg University in December 2016 with the proposed trunk section for the new western breakwater in Port of Hanstholm. The objectives of the model tests were to study the stability of the armour layer, toe...... erosion, overtopping and transmission. The scale used for the model tests was 1:61.5. Unless otherwise specified all values given in this report are prototype values converted from the model to prototype according to the Froude model law....

Production of didactic toys to children aged 3–6 years

OpenAIRE

Fajdiga, Ani

2013-01-01

The motivation for writing my diploma thesis titled Production of didactic toys to children aged 3–6 years came during arts and crafts course at the faculty when I made some didactic toys and took them to the kindergarten. There I observed how children eagerly examined the toys and asked me lots of questions about them with curiosity. Since there are not many good toys with which the children can play in the kindergarten, a thought sprang to mind that the children could acquire new knowledge ...

Continuum modeling of three-dimensional truss-like space structures

Science.gov (United States)

Nayfeh, A. H.; Hefzy, M. S.

1978-01-01

A mathematical and computational analysis capability has been developed for calculating the effective mechanical properties of three-dimensional periodic truss-like structures. Two models are studied in detail. The first, called the octetruss model, is a three-dimensional extension of a two-dimensional model, and the second is a cubic model. Symmetry considerations are employed as a first step to show that the specific octetruss model has four independent constants and that the cubic model has two. The actual values of these constants are determined by averaging the contributions of each rod element to the overall structure stiffness. The individual rod member contribution to the overall stiffness is obtained by a three-dimensional coordinate transformation. The analysis shows that the effective three-dimensional elastic properties of both models are relatively close to each other.

Experimental investigation of flow over two-dimensional multiple hill models.

Science.gov (United States)

Li, Qing'an; Maeda, Takao; Kamada, Yasunari; Yamada, Keisuke

2017-12-31

The aim of this study is to investigate the flow field characteristics in ABL (Atmospheric Boundary Layer) flow over multiple hills and valleys in two-dimensional models under neutral conditions. Active turbulence grids and boundary layer generation frame were used to simulate the natural winds in wind tunnel experiments. As a result, the mean wind velocity, the velocity vector diagram and turbulence intensity around the hills were investigated by using a PIV (Particle Image Velocimetry) system. From the measurement results, it was known that the average velocity was increased along the upstream slope of upside hill, and then separated at the top of the hills, the acceleration region of U/U ref >1 was generated at the downstream of the hill. Meanwhile, a large clockwise circulation flow was generated between the two hill models. Moreover, the turbulence intensity showed small value in the circulation flow regions. Compared to 1H model, the turbulence intensity in the mainstream direction showed larger value than that in the vertical direction. This paper provided a better understanding of the wind energy distribution on the terrain for proper selection of suitable sites for installing wind farms in the ABL. Copyright © 2017 Elsevier B.V. All rights reserved.

Noise levels of toys for children between the ages of birth and 3 ...

African Journals Online (AJOL)

Design. A quantitative, non-experimental, descriptive research design was employed for this study. Subjects. Twenty toys, 5 from each of 4 categories, were chosen from a popular toy store in ... the noise levels of toys on the packaging and adherence to ASTM International standards for toy manufacturers are recommended.

A non-perturbative approach to strings

International Nuclear Information System (INIS)

Orland, P.

1986-01-01

After briefly reviewing the theory of strings in the light-cone gauge, a lattice regularized path integral for the amplitudes is discussed. The emphasis is put on a toy string model; the U(N) Veneziano model in the limit as N → ∞, with g/sup 2//sub o/N fixed. The lattice methods of Giles and Thorn are used extensively, but are found to require modification beyond perturbation theory. The twenty-six-dimensional toy string model is recast as a two-dimensional spin system

A solution for two-dimensional mazes with use of chaotic dynamics in a recurrent neural network model.

Science.gov (United States)

Suemitsu, Yoshikazu; Nara, Shigetoshi

2004-09-01

Chaotic dynamics introduced into a neural network model is applied to solving two-dimensional mazes, which are ill-posed problems. A moving object moves from the position at t to t + 1 by simply defined motion function calculated from firing patterns of the neural network model at each time step t. We have embedded several prototype attractors that correspond to the simple motion of the object orienting toward several directions in two-dimensional space in our neural network model. Introducing chaotic dynamics into the network gives outputs sampled from intermediate state points between embedded attractors in a state space, and these dynamics enable the object to move in various directions. System parameter switching between a chaotic and an attractor regime in the state space of the neural network enables the object to move to a set target in a two-dimensional maze. Results of computer simulations show that the success rate for this method over 300 trials is higher than that of random walk. To investigate why the proposed method gives better performance, we calculate and discuss statistical data with respect to dynamical structure.

Nonequilibrium two-dimensional Ising model with stationary uphill diffusion

Science.gov (United States)

Colangeli, Matteo; Giardinà, Cristian; Giberti, Claudio; Vernia, Cecilia

2018-03-01

Usually, in a nonequilibrium setting, a current brings mass from the highest density regions to the lowest density ones. Although rare, the opposite phenomenon (known as "uphill diffusion") has also been observed in multicomponent systems, where it appears as an artificial effect of the interaction among components. We show here that uphill diffusion can be a substantial effect, i.e., it may occur even in single component systems as a consequence of some external work. To this aim we consider the two-dimensional ferromagnetic Ising model in contact with two reservoirs that fix, at the left and the right boundaries, magnetizations of the same magnitude but of opposite signs.We provide numerical evidence that a class of nonequilibrium steady states exists in which, by tuning the reservoir magnetizations, the current in the system changes from "downhill" to "uphill". Moreover, we also show that, in such nonequilibrium setup, the current vanishes when the reservoir magnetization attains a value approaching, in the large volume limit, the magnetization of the equilibrium dynamics, thus establishing a relation between equilibrium and nonequilibrium properties.

Tips for Teachers Selecting Toys to Facilitate Social Interaction

Science.gov (United States)

Vail, Cynthia O.; Elmore, Shannon Renee

2011-01-01

Toy selection is an important role for early childhood teachers. This research-to-practice article describes what research tells us about how toys can affect the social interactions and communication of young children including those with developmental delays.

Study of two-dimensional interchange turbulence

International Nuclear Information System (INIS)

Sugama, Hideo; Wakatani, Masahiro.

1990-04-01

An eddy viscosity model describing enstrophy transfer in two-dimensional turbulence is presented. This model is similar to that of Canuto et al. and provides an equation for the energy spectral function F(k) as a function of the energy input rate to the system per unit wavenumber, γ s (k). In the enstrophy-transfer inertial range, F(k)∝ k -3 is predicted by the model. The eddy viscosity model is applied to the interchange turbulence of a plasma in shearless magnetic field. Numerical simulation of the two-dimensional interchange turbulence demonstrates that the energy spectrum in the high wavenumber region is well described by this model. The turbulent transport driven by the interchange turbulence is expressed in terms of the Nusselt number Nu, the Rayleigh number Ra and Prantl number Pr in the same manner as that of thermal convection problem. When we use the linear growth rate for γ s (k), our theoretical model predicts that Nu ∝ (Ra·Pr) 1/2 for a constant background pressure gradient and Nu ∝ (Ra·Pr) 1/3 for a self-consistent background pressure profile with the stress-free slip boundary conditions. The latter agrees with our numerical result showing Nu ∝ Ra 1/3 . (author)

On the confinement of a Dirac particle to a two-dimensional ring

International Nuclear Information System (INIS)

Bakke, K.; Furtado, C.

2012-01-01

In this contribution, we propose a new model for studying the confinement of a spin-half particle to a two-dimensional quantum ring for systems described by the Dirac equation by introducing a new coupling into the Dirac equation. We show that the introduction of this new coupling into the Dirac equation yields a generalization of the two-dimensional quantum ring model proposed by Tan and Inkson [W.-C. Tan, J.C. Inkson, Semicond. Sci. Technol. 11 (1996) 1635] for relativistic spin-half quantum particles. -- Highlights: ► Two-dimensional ring model for condensed matter systems described by the Dirac equation. ► Exact solutions of the Dirac equation. ► Persistent currents for Dirac-like systems confined to a two-dimensional quantum ring.

Mathematical toy model inspired by the problem of the adaptive origins of the sexual orientation continuum

Science.gov (United States)

Skinner, Brian

2016-09-01

Same-sex sexual behaviour is ubiquitous in the animal kingdom, but its adaptive origins remain a prominent puzzle. Here, I suggest the possibility that same-sex sexual behaviour arises as a consequence of the competition between an evolutionary drive for a wide diversity in traits, which improves the adaptability of a population, and a drive for sexual dichotomization of traits, which promotes opposite-sex attraction and increases the rate of reproduction. This trade-off is explored via a simple mathematical `toy model'. The model exhibits a number of interesting features and suggests a simple mathematical form for describing the sexual orientation continuum.

Monte Carlo study of the phase diagram for the two-dimensional Z(4) model

International Nuclear Information System (INIS)

Carneiro, G.M.; Pol, M.E.; Zagury, N.

1982-05-01

The phase diagram of the two-dimensional Z(4) model on a square lattice is determined using a Monte Carlo method. The results of this simulation confirm the general features of the phase diagram predicted theoretically for the ferromagnetic case, and show the existence of a new phase with perpendicular order. (Author) [pt

Two-dimensional heat flow apparatus

Science.gov (United States)

McDougall, Patrick; Ayars, Eric

2014-06-01

We have created an apparatus to quantitatively measure two-dimensional heat flow in a metal plate using a grid of temperature sensors read by a microcontroller. Real-time temperature data are collected from the microcontroller by a computer for comparison with a computational model of the heat equation. The microcontroller-based sensor array allows previously unavailable levels of precision at very low cost, and the combination of measurement and modeling makes for an excellent apparatus for the advanced undergraduate laboratory course.

Plastic toys as a source of exposure to bisphenol-A and phthalates at childcare facilities.

Science.gov (United States)

Andaluri, Gangadhar; Manickavachagam, Muruganandham; Suri, Rominder

2018-01-06

Infants and toddlers are constantly exposed to toys at childcare facilities. Toys are made of a variety of plastics that often use endocrine-disrupting chemicals such as bisphenol-A (BPA) and phthalates as their building blocks. The goal of this study was to assess the non-dietary exposure of infants and toddlers to BPA and phthalates via leaching. We have successfully developed wipe tests to evaluate the leachability of BPA and phthalates from toys used at several day care facilities in Philadelphia. Our studies have shown an average leaching of 13-280 ng/cm 2 of BPA and phthalates. An estimate of total exposure of infants to BPA and phthalates is reported. The leaching of the chemicals was observed to be dependent on the washing procedures and the location of the day care facilities. Using bleach/water mixture two or more times a week to clean the toys seems to reduce the leaching of chemicals from the toys. There is a huge data gap in the estimated intake amounts and reported urinary concentrations; this is the first study that provides valuable information to address these data gaps in the existing literature.

High-resolution two-dimensional and three-dimensional modeling of wire grid polarizers and micropolarizer arrays

Science.gov (United States)

Vorobiev, Dmitry; Ninkov, Zoran

2017-11-01

Recent advances in photolithography allowed the fabrication of high-quality wire grid polarizers for the visible and near-infrared regimes. In turn, micropolarizer arrays (MPAs) based on wire grid polarizers have been developed and used to construct compact, versatile imaging polarimeters. However, the contrast and throughput of these polarimeters are significantly worse than one might expect based on the performance of large area wire grid polarizers or MPAs, alone. We investigate the parameters that affect the performance of wire grid polarizers and MPAs, using high-resolution two-dimensional and three-dimensional (3-D) finite-difference time-domain simulations. We pay special attention to numerical errors and other challenges that arise in models of these and other subwavelength optical devices. Our tests show that simulations of these structures in the visible and near-IR begin to converge numerically when the mesh size is smaller than ˜4 nm. The performance of wire grid polarizers is very sensitive to the shape, spacing, and conductivity of the metal wires. Using 3-D simulations of micropolarizer "superpixels," we directly study the cross talk due to diffraction at the edges of each micropolarizer, which decreases the contrast of MPAs to ˜200∶1.

Estimation of Lead (Pb in Toys Using X-Ray Fluorescence Technology

Directory of Open Access Journals (Sweden)

Sandipayan Dutta

2016-01-01

Full Text Available Background: Lead exists extensively in the environment and it is a heavy metal, which is neurotoxic in nature which is harmful to children. In contrast to trace elements such as iron (Fe and zinc (Zn, lead has no recognized benecial effects in human body. With the economic development in India in recent years, the concentration of lead has increased in the environment and henceforth, lead pollution has become a severe problem in the country. Lead poisoning can create an immense damage and irreversible harm to foetal growth, the growth of teenagers and psychological, behavioural and cognitive development. Aim and Objectives: To estimate the lead content in the sample of toys. Material and Methods: 97 different toys were collected and coded as TS, these toys were kept in plastic lock cover which were lead proof. At rst the toys were arranged in order according to the serial number of the code (TS1 – TS97. The FP X-ray uorescence (Innov-X ray analyzer instrument was placed with the window of the analyzer on the surface of the toy vertically in such a way that there was no gap between the toy surface and the sampling window. The parts per million (ppm values of all toys were recorded. Results: Out of 97 samples tested, 22 samples were above permissible limits. The different materials demonstrate signicant correlation with the lead content in ppm. Lead is used as a stabilizer in some toys as well as children's items made from PVC plastic. Baby toys made up of plastic have higher concentration of lead. Lead can leach out of products when children handle and swallow them involuntarily.

Social interactions and play patterns of parents and toddlers with feminine, masculine, and neutral toys.

Science.gov (United States)

Caldera, Y M; Huston, A C; O'Brien, M

1989-02-01

Children as young as 18 months display sex-stereotyped toy choices. The present study was designed to determine whether parents encourage involvement with sex-stereotyped toys or avoidance of cross-sex-stereotyped toys and to determine whether masculine and feminine toys lead to different patterns of parent-child interaction, regardless of gender. 40 parent-toddler dyads were videotaped while playing with 6 different sets of sex-stereotyped toys. Equal numbers of boys and girls were observed with mothers and fathers. The children showed greater involvement when playing with same-sex-typed toys than with cross-sex toys even when statistically controlling for parents' behaviors. Parents' verbal behaviors, involvement, and proximity to the child differed across toy groups, regardless of the parent's or child's gender. Parents' initial nonverbal responses to the toys, however, were more positive when the toys were stereotyped for the child's and parent's gender than when they were not.

Phase fluctuations in two coaxial quasi-one-dimensional superconducting cylindrical surfaces serving as a model system for superconducting nanowire bundles

Energy Technology Data Exchange (ETDEWEB)

Wong, C.H., E-mail: ch.kh.vong@urfu.ru [Institute of Physics and Technology, Ural Federal University, Clear Water Bay, Kowloon (Russian Federation); Wu, R.P.H., E-mail: pak-hong-raymond.wu@connect.polyu.hk [Department of Applied Physics, The Hong Kong Polytechnic University (Hong Kong); Lortz, R., E-mail: lortz@ust.hk [Department of Physics, Hong Kong University of Science and Technology (Hong Kong)

2017-03-15

The dimensional crossover from a 1D fluctuating state at high temperatures to a 3D phase coherent state in the low temperature regime in two coaxial weakly-coupled cylindrical surfaces formed by two-dimensional arrays of parallel nanowires is studied via an 8-state 3D-XY model. This system serves as a model for quasi-one-dimensional superconductors in the form of bundles of weakly-coupled superconducting nanowires. A periodic variation of the dimensional crossover temperature T{sub DC} is observed when the inner superconducting cylindrical surface is rotated in the angular plane. T{sub DC} reaches a maximum when the relative angle between the cylinders is 2.81°, which corresponds to the maximum separation of nanowires between the two cylindrical surfaces. We demonstrate that the relative strength of phase fluctuations in this system is controllable by the rotational angle between the two surfaces with a strong suppression of the fluctuation strength at 2.81°. The phase fluctuations are suppressed gradually upon cooling, before they abruptly vanish below T{sub DC}. Our model thus allows us to study how phase fluctuations can be suppressed in quasi-one-dimensional superconductors in order to achieve a global phase coherent state throughout the nanowire array with zero electric resistance.

Parity-Time Symmetry and the Toy Models of Gain-Loss Dynamics near the Real Kato’s Exceptional Points

Directory of Open Access Journals (Sweden)

Miloslav Znojil

2016-06-01

Full Text Available For a given operator D ( t of an observable in theoretical parity-time symmetric quantum physics (or for its evolution-generator analogues in the experimental gain-loss classical optics, etc. the instant t c r i t i c a l of a spontaneous breakdown of the parity-time alias gain-loss symmetry should be given, in the rigorous language of mathematics, the Kato’s name of an “exceptional point”, t c r i t i c a l = t ( E P . In the majority of conventional applications the exceptional point (EP values are not real. In our paper, we pay attention to several exactly tractable toy-model evolutions for which at least some of the values of t ( E P become real. These values are interpreted as “instants of a catastrophe”, be it classical or quantum. In the classical optical setting the discrete nature of our toy models might make them amenable to simulations. In the latter context the instant of Big Bang is mentioned as an illustrative sample of possible physical meaning of such an EP catastrophe in quantum cosmology.

“Mood-modules”: Interconnected Wireless Toy Units for Studies of Social Play through Musical and Sonic Games

DEFF Research Database (Denmark)

Hansen, Anne-Marie; Andersen, Hans Jørgen

This paper outlines the research background, focus and methods that will be used in the study of musical and sonic games that are embedded in interconnected wireless toy modules. Seen in the light of the idea: “The ensemble as a musical and social experience”, an approach for designing electronic...... toys for children will be discussed. Five electronic toy units function as test objects. These sensor devices will contain musical and sonic games. Children manipulate sound parameters, when they interact with each sensor, or rather, combinations of sensors. When two or more children interact...

Effects of stratospheric aerosol surface processes on the LLNL two-dimensional zonally averaged model

International Nuclear Information System (INIS)

Connell, P.S.; Kinnison, D.E.; Wuebbles, D.J.; Burley, J.D.; Johnston, H.S.

1992-01-01

We have investigated the effects of incorporating representations of heterogeneous chemical processes associated with stratospheric sulfuric acid aerosol into the LLNL two-dimensional, zonally averaged, model of the troposphere and stratosphere. Using distributions of aerosol surface area and volume density derived from SAGE 11 satellite observations, we were primarily interested in changes in partitioning within the Cl- and N- families in the lower stratosphere, compared to a model including only gas phase photochemical reactions

Chiral Models in Noncommutative N=1/2 Four Dimensional Superspace

DEFF Research Database (Denmark)

Ryttov, Thomas; Sannino, Francesco

2005-01-01

We derive the component Lagrangian for a generic N=1/2 supersymmetric chiral model with an arbitrary number of fields in four space-time dimensions. We then investigate a toy model in which the deformation parameter modifies the undeformed potential near the origin of the field space in a way which...

Nanolithographic Fabrication and Heterogeneous Reaction Studies ofTwo-Dimensional Platinum Model Catalyst Systems

Energy Technology Data Exchange (ETDEWEB)

Contreras, Anthony Marshall [Univ. of California, Berkeley, CA (United States)

2006-05-20

In order to better understand the fundamental components that govern catalytic activity, two-dimensional model platinum nanocatalyst arrays have been designed and fabricated. These catalysts arrays are meant to model the interplay of the metal and support important to industrial heterogeneous catalytic reactions. Photolithography and sub-lithographic techniques such as electron beam lithography, size reduction lithography and nanoimprint lithography have been employed to create these platinum nanoarrays. Both in-situ and ex-situ surface science techniques and catalytic reaction measurements were used to correlate the structural parameters of the system to catalytic activity.

Sensitivity studies and a simple ozone perturbation experiment with a truncated two-dimensional model of the stratosphere

Science.gov (United States)

Stordal, Frode; Garcia, Rolando R.

1987-01-01

The 1-1/2-D model of Holton (1986), which is actually a highly truncated two-dimensional model, describes latitudinal variations of tracer mixing ratios in terms of their projections onto second-order Legendre polynomials. The present study extends the work of Holton by including tracers with photochemical production in the stratosphere (O3 and NOy). It also includes latitudinal variations in the photochemical sources and sinks, improving slightly the calculated global mean profiles for the long-lived tracers studied by Holton and improving substantially the latitudinal behavior of ozone. Sensitivity tests of the dynamical parameters in the model are performed, showing that the response of the model to changes in vertical residual meridional winds and horizontal diffusion coefficients is similar to that of a full two-dimensional model. A simple ozone perturbation experiment shows the model's ability to reproduce large-scale latitudinal variations in total ozone column depletions as well as ozone changes in the chemically controlled upper stratosphere.

Low-dimensional modeling of a driven cavity flow with two free parameters

DEFF Research Database (Denmark)

Jørgensen, Bo Hoffmann; Sørensen, Jens Nørkær; Brøns, Morten

2003-01-01

. By carrying out such a procedure one obtains a low-dimensional model consisting of a reduced set of Ordinary Differential Equations (ODEs) which models the original equations. A technique called Sequential Proper Orthogonal Decomposition (SPOD) is developed to perform decompositions suitable for low...... parameters to appear in the inhomogeneous boundary conditions without the addition of any constraints. This is necessary because both the driving lid and the rotating rod are controlled simultaneously. Apparently, the results reported for this model are the first to be obtained for a low-dimensional model...

Cat, dog and house dust mite allergen levels on children's soft toys.

Science.gov (United States)

Wu, Francis Fu-Sheng; Wu, Mei-Wen; Ting, Ming-Hui; Crane, Julian; Siebers, Rob

2014-02-01

Children's soft toys are known to harbour house dust mite (HDM) allergens, but little is known whether they harbour cat or dog allergens. The objective of the study was to measure cat (Fel d 1), dog (Can f 1) and HDM allergens on children's soft toys. Dust was collected from 40 children's soft toys and their mattresses. Data were collected on pet ownership. Dust samples were analysed for Fel d 1, Can f 1, Der p 1 and Der f 1 by enzyme-linked immunosorbent assay (ELISA) and results are expressed as median levels with inter-quartile ranges. Thirty-five (87.5%) soft toys had detectable Fel d 1 levels (median: 0.73 µg/g; inter-quartile range: 0.26-2.56 µg/g) while 34 (85%) had detectable Can f 1 levels (1.20 µg/g; 0.53-2.68). Correspondingly, 32 (80%) mattresses had detectable Fel d 1 levels (0.18 µg/g, 0.07-1.01) while 34 (85%) had detectable Can f 1 levels (0.50 µg/g; 0.33-1.06). All mattresses and soft toys had detectable HDM allergen (Der p 1 + Der f 1) levels with soft toys containing about three times higher levels than mattresses. In homes with cats (n = 10) Fel d 1 levels were higher on soft toys than homes without cats (2.49 versus 0.48 µg/g; p = 0.0009). In homes with dogs (n = 25) Can f 1 levels were generally higher on soft toys (1.38 versus 0.63 µg/g; p = 0.10). This study has shown that soft toys can harbour cat and dog allergen as well as HDM allergens, some with very high levels. Cat and dog ownership resulted in higher Fel d 1 and Can f 1 levels on soft toys and mattresses. The levels of Fel d 1, Can f 1 and HDM allergens on soft toys could be of importance to sensitized asthmatic children.

Two-Dimensional Physical and CFD Modelling of Large Gas Bubble Behaviour in Bath Smelting Furnaces

Directory of Open Access Journals (Sweden)

Yuhua Pan

2010-09-01

Full Text Available The behaviour of large gas bubbles in a liquid bath and the mechanisms of splash generation due to gas bubble rupture in high-intensity bath smelting furnaces were investigated by means of physical and mathematical (CFD modelling techniques. In the physical modelling work, a two-dimensional Perspex model of the pilot plant furnace at CSIRO Process Science and Engineering was established in the laboratory. An aqueous glycerol solution was used to simulate liquid slag. Air was injected via a submerged lance into the liquid bath and the bubble behaviour and the resultant splashing phenomena were observed and recorded with a high-speed video camera. In the mathematical modelling work, a two-dimensional CFD model was developed to simulate the free surface flows due to motion and deformation of large gas bubbles in the liquid bath and rupture of the bubbles at the bath free surface. It was concluded from these modelling investigations that the splashes generated in high-intensity bath smelting furnaces are mainly caused by the rupture of fast rising large gas bubbles. The acceleration of the bubbles into the preceding bubbles and the rupture of the coalescent bubbles at the bath surface contribute significantly to splash generation.

An evaluation of lead contamination in plastic toys collected from day care centers in the Las Vegas Valley, Nevada, USA.

Science.gov (United States)

Greenway, Joseph A; Gerstenberger, Shawn

2010-10-01

Childhood exposure to environmental lead continues to be a major health concern. This study examined lead content within the plastic of children's toys collected from licensed day care centers in the Las Vegas valley, Nevada. It was hypothesized that the use of lead as a plastics stabilizer would result in elevated lead (≥600 ppm) in polyvinyl chloride plastics (PVC) compared to non-PVC plastics. It was also hypothesized that, due to the use of lead chromate as a coloring agent, yellow toys would contain higher concentrations of lead (≥600 ppm) than toys of other colors. Toy samples were limited to those found in day care centers in Las Vegas, Nevada. 10 day care centers were visited and approximately 50 toy samples were taken from each center. Of the 535 toys tested, 29 contained lead in excess of 600 parts per million (ppm). Of those 29 toys, 20 were PVC and 17 were yellow. Both of the two hypotheses were strongly supported by the data.

Two-dimensional QCD in the Coulomb gauge

International Nuclear Information System (INIS)

Kalashnikova, Yu.S.; Nefed'ev, A.V.

2002-01-01

Various aspects of the 't Hooft model for two-dimensional QCD in the limit of infinite number of colours in the Coulomb gauge are discussed. The properties of mesonic excitations are studied, with special emphasis on the pion. Attention is paid to the dual role of the pion. which, while a genuine qq-bar state, is a Goldstone boson of two-dimensional QCD as well. In particular, the validity of the soft-pion theorems is demonstrated. It is shown that the Coulomb gauge is the most suitable choice for the study of hadronic observables involving pions [ru

A Two-Temperature Open-Source CFD Model for Hypersonic Reacting Flows, Part Two: Multi-Dimensional Analysis †

Directory of Open Access Journals (Sweden)

Vincent Casseau

2016-12-01

Full Text Available hy2Foam is a newly-coded open-source two-temperature computational fluid dynamics (CFD solver that has previously been validated for zero-dimensional test cases. It aims at (1 giving open-source access to a state-of-the-art hypersonic CFD solver to students and researchers; and (2 providing a foundation for a future hybrid CFD-DSMC (direct simulation Monte Carlo code within the OpenFOAM framework. This paper focuses on the multi-dimensional verification of hy2Foam and firstly describes the different models implemented. In conjunction with employing the coupled vibration-dissociation-vibration (CVDV chemistry–vibration model, novel use is made of the quantum-kinetic (QK rates in a CFD solver. hy2Foam has been shown to produce results in good agreement with previously published data for a Mach 11 nitrogen flow over a blunted cone and with the dsmcFoam code for a Mach 20 cylinder flow for a binary reacting mixture. This latter case scenario provides a useful basis for other codes to compare against.

Two-dimensional model of laser alloying of binary alloy powder with interval of melting temperature

Science.gov (United States)

Knyzeva, A. G.; Sharkeev, Yu. P.

2017-10-01

The paper contains two-dimensional model of laser beam melting of powders from binary alloy. The model takes into consideration the melting of alloy in some temperature interval between solidus and liquidus temperatures. The external source corresponds to laser beam with energy density distributed by Gauss law. The source moves along the treated surface according to given trajectory. The model allows investigating the temperature distribution and thickness of powder layer depending on technological parameters.

The Two- and Three-Dimensional Models of the HK-WISC: A Confirmatory Factor Analysis.

Science.gov (United States)

Chan, David W.; Lin, Wen-Ying

1996-01-01

Confirmatory analyses on the Hong Kong Wechsler Intelligence Scale for Children (HK-WISC) provided support for composite score interpretation based on the two- and three-dimensional models across age levels. Test sample was comprised of 1,100 children, ranging in age from 5 to 15 years at all 11 age levels specified by the HK-WISC. (KW)

Q-deformed Grassmann field and the two-dimensional Ising model

International Nuclear Information System (INIS)

Bugrij, A.I.; Shadura, V.N.

1994-01-01

In this paper we construct the exact representation of the Ising partition function in form of the SL q (2,R)-invariant functional integral for the lattice free q-fermion field theory (q=-1). It is shown that the proposed method of q-fermionization allows one to re-express the partition function of the eight vertex model in external field through the functional integral with four-fermion interaction. For the construction of these representation we define a lattice (l,q,s)-deformed Grassmann bi spinor field and extend the Berezin integration rules for this field. At q = - 1, l = s 1 we obtain the lattice q-fermion field which allows to fermionize the two-dimensional Ising model. We show that Gaussian integral over (q,s)-Grassmann variables is expressed through the (q,s)-deformed Pfaffian which is equal to square root of the determinant of some matrix at q = ± 1, s = ±1. (author). 39 refs

Quantification of toy sword kinematics with male pediatric volunteers.

Science.gov (United States)

Beeman, Stephanie M; Rowson, Steven; Duma, Stefan M

2014-01-01

While extensive research in toy safety has been performed, data is unavailable with regard to the kinematics of toy swords. To improve upon design criteria, knowledge of a child’s physical capacity is essential. The purpose of this study was to quantify the linear and angular velocities generated by children swinging toy swords. A total of 36 male subjects, ages 4-14 years old, each participated in one trial. Subjects were instructed to swing a toy sword as fast and hard as possible for ~10 seconds. A Vicon motion analysis system was used to capture subject and sword kinematics. Peak linear and angular sword velocities were calculated. A strong correlation was identified between age and velocity. The 8-14 year old males were not significantly different. The 4 year old males generated significantly lower velocities than the 8-14 year old males. The 6 year old males produced significantly lower velocities than the 10- 14 year old males. It was concluded that age had a significant effect on the linear and angular velocities generated by children. The trends observed within this study likely result from typical pediatric and adolescent development. By accounting for the physical capabilities of a specific population, toys can be designed with decreased inherent risks of injury.

Phase transitions in two-dimensional uniformly frustrated XY models. I. antiferromagnetic model on a triangular lattice

International Nuclear Information System (INIS)

Korshunov, S.E.; Uimin, G.V.

1986-01-01

A most popular model in the family of two-dimensional uniformly-frustrated XY models is the antiferromagnetic model on a triangular lattice (AF XY(t) model). Its ground state is both continuously and twofold discretely degenerated. Different phase transitions possible in such systems are investigated. Relevant topological excitations are analyzed and a new class of such (vortices with a fractional number of circulation quanta) is discovered. Their role in determining the properties of the system proves itself essential. The characteristics of phase transitions related to breaking of discrete and continuous symmetries change. The phase diagram of the ''generalized'' AF XY(t) model is constructed. The results obtained are rederived in the representation of the Coulomb gas with half-interger charges, equivalent to the AF XY(t) model with the Berezinskii-Villain interaction

Two-dimensional strain gradient damage modeling: a variational approach

Science.gov (United States)

Placidi, Luca; Misra, Anil; Barchiesi, Emilio

2018-06-01

In this paper, we formulate a linear elastic second gradient isotropic two-dimensional continuum model accounting for irreversible damage. The failure is defined as the condition in which the damage parameter reaches 1, at least in one point of the domain. The quasi-static approximation is done, i.e., the kinetic energy is assumed to be negligible. In order to deal with dissipation, a damage dissipation term is considered in the deformation energy functional. The key goal of this paper is to apply a non-standard variational procedure to exploit the damage irreversibility argument. As a result, we derive not only the equilibrium equations but, notably, also the Karush-Kuhn-Tucker conditions. Finally, numerical simulations for exemplary problems are discussed as some constitutive parameters are varying, with the inclusion of a mesh-independence evidence. Element-free Galerkin method and moving least square shape functions have been employed.

Three-dimensional numerical modeling of turbulent single-phase and two-phase flow in curved pipes

International Nuclear Information System (INIS)

Xin, R.C.; Dong, Z.F.; Ebadian, M.A.

1996-01-01

In this study, three-dimensional single-phase and two-phase flows in curved pipes have been investigated numerically. Two different pipe configurations were computed. When the results of the single-phase flow simulation were compared with the experimental data, a fairly good agreement was achieved. A flow-developing process has been suggested in single-phase flow, in which the turbulence is stronger near the outer tube wall than near the inner tube wall. For two-phase flow, the Eulerian multiphase model was used to simulate the phase distribution of a three-dimensional gas-liquid bubble flow in curved pipe. The RNG/κ-ε turbulence model was used to determine the turbulence field. An inlet gas void fraction of 5 percent was simulated. The gas phase effects on the liquid phase flow velocity have been examined by comparing the results of single-phase flow and two-phase flow. The findings show that for the downward flow in the U bend, the gas concentrates at the inner portion of the cross section at φ = π/18 - π/6 in most cases. The results of the phase distribution simulation are compared to experimental observations qualitatively and topologically

Two-dimensional Thermal Modeling of Lithium-ion Battery Cell Based on Electrothermal Impedance Spectroscopy

DEFF Research Database (Denmark)

Swierczynski, Maciej Jozef; Stroe, Daniel Loan; Knap, Vaclav

2016-01-01

Thermal modeling of lithium-ion batteries is gaining its importance together with increasing power density and compact design of the modern battery systems in order to assure battery safety and long lifetime. Thermal models of lithium-ion batteries are usually either expensive to develop...... and accurate or equivalent thermal circuit based with moderate accuracy and without spatial temperature distribution. This work presents initial results that can be used as a fundament for the cost-efficient development of the two-dimensional thermal model of lithium-ion battery based on multipoint...

Hazardous metals in vintage plastic toys measured by a handheld X-ray fluorescence spectrometer.

Science.gov (United States)

Miller, Gillian Zaharias; Harris, Zoe E

2015-01-01

Over 100 plastic toys from the 1970s and 1980s, both polyvinyl chloride ("vinyl") and nonvinyl, were analyzed in the study described here using a handheld X-ray fluorescence spectrometer to quantify hazardous metal content. A sampling of recent vinyl toys was also tested. The majority of nonvinyl samples were Fisher Price brand toys. The vinyl toys consisted largely of Barbie dolls and other dolls. Overall, lead or cadmium was found in 67% of vintage plastic toys, frequently at concentrations exceeding current U.S. and European limits. Arsenic was detected at levels of concern in 16% of the samples. In the nonvinyl toys, heavy metal content was found to correlate with certain colors of plastic. The likely sources of the detected metals are discussed. None of the contemporary vinyl toys contained detectable cadmium, lead, or arsenic. Given that vintage toys remain in widespread use by children in homes and other locations, the results illuminate a potential source of heavy metal exposure for children.

The potential of artificial intelligence toys

DEFF Research Database (Denmark)

Dai, Zheng

2008-01-01

Artificial intelligence is moving to a next step of development and application areas. From electronic games to human-like robots, AI toy is a good choice for next step during this process. Technology-based design is fit to the development of AI toy. It can exert the advantages and explore more...... value for existing resources. It combines AI programs and common sensors to realize the function of intelligence input and output. Designers can use technology-based criteria to design and need to consider the possible issues in this new field. All of these aspects can be referenced from electronic game...

Mechanical exfoliation of two-dimensional materials

Science.gov (United States)

Gao, Enlai; Lin, Shao-Zhen; Qin, Zhao; Buehler, Markus J.; Feng, Xi-Qiao; Xu, Zhiping

2018-06-01

Two-dimensional materials such as graphene and transition metal dichalcogenides have been identified and drawn much attention over the last few years for their unique structural and electronic properties. However, their rise begins only after these materials are successfully isolated from their layered assemblies or adhesive substrates into individual monolayers. Mechanical exfoliation and transfer are the most successful techniques to obtain high-quality single- or few-layer nanocrystals from their native multi-layer structures or their substrate for growth, which involves interfacial peeling and intralayer tearing processes that are controlled by material properties, geometry and the kinetics of exfoliation. This procedure is rationalized in this work through theoretical analysis and atomistic simulations. We propose a criterion to assess the feasibility for the exfoliation of two-dimensional sheets from an adhesive substrate without fracturing itself, and explore the effects of material and interface properties, as well as the geometrical, kinetic factors on the peeling behaviors and the torn morphology. This multi-scale approach elucidates the microscopic mechanism of the mechanical processes, offering predictive models and tools for the design of experimental procedures to obtain single- or few-layer two-dimensional materials and structures.

One- and two-dimensional Stirling machine simulation using experimentally generated reversing flow turbuulence models

International Nuclear Information System (INIS)

Goldberg, L.F.

1990-08-01

The activities described in this report do not constitute a continuum but rather a series of linked smaller investigations in the general area of one- and two-dimensional Stirling machine simulation. The initial impetus for these investigations was the development and construction of the Mechanical Engineering Test Rig (METR) under a grant awarded by NASA to Dr. Terry Simon at the Department of Mechanical Engineering, University of Minnesota. The purpose of the METR is to provide experimental data on oscillating turbulent flows in Stirling machine working fluid flow path components (heater, cooler, regenerator, etc.) with particular emphasis on laminar/turbulent flow transitions. Hence, the initial goals for the grant awarded by NASA were, broadly, to provide computer simulation backup for the design of the METR and to analyze the results produced. This was envisaged in two phases: First, to apply an existing one-dimensional Stirling machine simulation code to the METR and second, to adapt a two-dimensional fluid mechanics code which had been developed for simulating high Rayleigh number buoyant cavity flows to the METR. The key aspect of this latter component was the development of an appropriate turbulence model suitable for generalized application to Stirling simulation. A final-step was then to apply the two-dimensional code to an existing Stirling machine for which adequate experimental data exist. The work described herein was carried out over a period of three years on a part-time basis. Forty percent of the first year's funding was provided as a match to the NASA funds by the Underground Space Center, University of Minnesota, which also made its computing facilities available to the project at no charge

Development of a Two-dimensional Thermohydraulic Hot Pool Model and ITS Effects on Reactivity Feedback during a UTOP in Liquid Metal Reactors

International Nuclear Information System (INIS)

Lee, Yong Bum; Jeong, Hae Yong; Cho, Chung Ho; Kwon, Young Min; Ha, Kwi Seok; Chang, Won Pyo; Suk, Soo Dong; Hahn, Do Hee

2009-01-01

The existence of a large sodium pool in the KALIMER, a pool-type LMR developed by the Korea Atomic Energy Research Institute, plays an important role in reactor safety and operability because it determines the grace time for operators to cope with an abnormal event and to terminate a transient before reactor enters into an accident condition. A two-dimensional hot pool model has been developed and implemented in the SSC-K code, and has been successfully applied for the assessment of safety issues in the conceptual design of KALIMER and for the analysis of anticipated system transients. The other important models of the SSC-K code include a three-dimensional core thermal-hydraulic model, a reactivity model, a passive decay heat removal system model, and an intermediate heat transport system and steam generation system model. The capability of the developed two-dimensional hot pool model was evaluated with a comparison of the temperature distribution calculated with the CFX code. The predicted hot pool coolant temperature distributions obtained with the two-dimensional hot pool model agreed well with those predicted with the CFX code. Variations in the temperature distribution of the hot pool affect the reactivity feedback due to an expansion of the control rod drive line (CRDL) immersed in the pool. The existing CRDL reactivity model of the SSC-K code has been modified based on the detailed hot pool temperature distribution obtained with the two-dimensional pool model. An analysis of an unprotected transient over power with the modified reactivity model showed an improved negative reactivity feedback effect

Two-dimensional metamaterial optics

International Nuclear Information System (INIS)

Smolyaninov, I I

2010-01-01

While three-dimensional photonic metamaterials are difficult to fabricate, many new concepts and ideas in the metamaterial optics can be realized in two spatial dimensions using planar optics of surface plasmon polaritons. In this paper we review recent progress in this direction. Two-dimensional photonic crystals, hyperbolic metamaterials, and plasmonic focusing devices are demonstrated and used in novel microscopy and waveguiding schemes

BLACK HOLE-NEUTRON STAR MERGERS AND SHORT GAMMA-RAY BURSTS: A RELATIVISTIC TOY MODEL TO ESTIMATE THE MASS OF THE TORUS

International Nuclear Information System (INIS)

Pannarale, Francesco; Tonita, Aaryn; Rezzolla, Luciano

2011-01-01

The merger of a binary system composed of a black hole (BH) and a neutron star (NS) may leave behind a torus of hot, dense matter orbiting around the BH. While numerical-relativity simulations are necessary to simulate this process accurately, they are also computationally expensive and unable at present to cover the large space of possible parameters, which include the relative mass ratio, the stellar compactness, and the BH spin. To mitigate this and provide a first reasonable coverage of the space of parameters, we have developed a method for estimating the mass of the remnant torus from BH-NS mergers. The toy model makes use of an improved relativistic affine model to describe the tidal deformations of an extended tri-axial ellipsoid orbiting around a Kerr BH and measures the mass of the remnant torus by considering which of the fluid particles composing the star are on bound orbits at the time of the tidal disruption. We tune the toy model by using the results of fully general-relativistic simulations obtaining relative precisions of a few percent and use it to investigate the space of parameters extensively. In this way, we find that the torus mass is largest for systems with highly spinning BHs, small stellar compactnesses, and large mass ratios. As an example, tori as massive as M b,tor ≅ 1.33 M sun can be produced for a very extended star with compactness C ≅ 0.1 inspiralling around a BH with dimensionless spin parameter a = 0.85 and mass ratio q ≅ 0.3. However, for a more astrophysically reasonable mass ratio q ≅ 0.14 and a canonical value of the stellar compactness C ≅ 0.145, the toy model sets a considerably smaller upper limit of M b,tor ∼ sun .

Dynamic colloidal assembly pathways via low dimensional models

Energy Technology Data Exchange (ETDEWEB)

Yang, Yuguang; Bevan, Michael A., E-mail: mabevan@jhu.edu [Chemical and Biomolecular Engineering, Johns Hopkins University, Baltimore, Maryland 21218 (United States); Thyagarajan, Raghuram; Ford, David M. [Chemical Engineering, University of Massachusetts, Amherst, Massachusetts 01003 (United States)

2016-05-28

Here we construct a low-dimensional Smoluchowski model for electric field mediated colloidal crystallization using Brownian dynamic simulations, which were previously matched to experiments. Diffusion mapping is used to infer dimensionality and confirm the use of two order parameters, one for degree of condensation and one for global crystallinity. Free energy and diffusivity landscapes are obtained as the coefficients of a low-dimensional Smoluchowski equation to capture the thermodynamics and kinetics of microstructure evolution. The resulting low-dimensional model quantitatively captures the dynamics of different assembly pathways between fluid, polycrystal, and single crystals states, in agreement with the full N-dimensional data as characterized by first passage time distributions. Numerical solution of the low-dimensional Smoluchowski equation reveals statistical properties of the dynamic evolution of states vs. applied field amplitude and system size. The low-dimensional Smoluchowski equation and associated landscapes calculated here can serve as models for predictive control of electric field mediated assembly of colloidal ensembles into two-dimensional crystalline objects.

String vacuum backgrounds with covariantly constant null Killing vector and two-dimensional quantum gravity

International Nuclear Information System (INIS)

Tseytlin, A.A.

1993-01-01

We consider a two-dimensional sigma model with a (2+N)-dimensional Minkowski signature target space metric having a covariantly constant null Killing vector. We study solutions of the conformal invariance conditions in 2+N dimensions and find that generic solutions can be represented in terms of the RG flow in N-dimensional 'transverse space' theory. The resulting conformal invariant sigma model is interpreted as a quantum action of the two-dimensional scalar ('dilaton') quantum gravity model coupled to a (non-conformal) 'transverse' sigma model. The conformal factor of the two-dimensional metric is identified with a light-cone coordinate of the (2+N)-dimensional sigma model. We also discuss the case when the transverse theory is conformal (with or without the antisymmetric tensor background) and reproduce in a systematic way the solutions with flat transverse space known before. (orig.)

Test of quantum thermalization in the two-dimensional transverse-field Ising model.

Science.gov (United States)

Blaß, Benjamin; Rieger, Heiko

2016-12-01

We study the quantum relaxation of the two-dimensional transverse-field Ising model after global quenches with a real-time variational Monte Carlo method and address the question whether this non-integrable, two-dimensional system thermalizes or not. We consider both interaction quenches in the paramagnetic phase and field quenches in the ferromagnetic phase and compare the time-averaged probability distributions of non-conserved quantities like magnetization and correlation functions to the thermal distributions according to the canonical Gibbs ensemble obtained with quantum Monte Carlo simulations at temperatures defined by the excess energy in the system. We find that the occurrence of thermalization crucially depends on the quench parameters: While after the interaction quenches in the paramagnetic phase thermalization can be observed, our results for the field quenches in the ferromagnetic phase show clear deviations from the thermal system. These deviations increase with the quench strength and become especially clear comparing the shape of the thermal and the time-averaged distributions, the latter ones indicating that the system does not completely lose the memory of its initial state even for strong quenches. We discuss our results with respect to a recently formulated theorem on generalized thermalization in quantum systems.

Heavy metals in toys and low-cost jewelry: critical review of U.S. and Canadian legislations and recommendations for testing.

Science.gov (United States)

Guney, Mert; Zagury, Gerald J

2012-04-17

High metal contamination in toys and low-cost jewelry is a widespread problem, and metals can become bioavailable, especially via oral pathway due to common child-specific behaviors of mouthing and pica. In this review, the U.S., Canadian, and European Union (EU) legislations on metals in toys and jewelry are evaluated. A literature review on content, bioavailability, children's exposure, and testing of metals in toys and low-cost jewelry is provided. A list of priority metals is presented, and research needs and legislative recommendations are addressed. While the U.S. and Canadian legislations put emphasis on lead exposure prevention, other toxic elements like arsenic and cadmium in toy materials are not regulated except in paint and coatings. The EU legislation is more comprehensive in terms of contaminants and scientific approach. Current toy testing procedures do not fully consider metal bioavailability. In vitro bioaccessibility tests developed and validated for toys and corresponding metal bioaccessibility data in different toy matrices are lacking. The U.S. and Canadian legislations should put more emphasis on metal bioavailability and on other metals in addition to lead. A two-step management approach with mandatory testing of toys for total metal concentrations followed by voluntary bioaccessibility testing could be implemented.

Temperature maxima in stable two-dimensional shock waves

International Nuclear Information System (INIS)

Kum, O.; Hoover, W.G.; Hoover, C.G.

1997-01-01

We use molecular dynamics to study the structure of moderately strong shock waves in dense two-dimensional fluids, using Lucy pair potential. The stationary profiles show relatively broad temperature maxima, for both the longitudinal and the average kinetic temperatures, just as does Mott-Smith model for strong shock waves in dilute three-dimensional gases. copyright 1997 The American Physical Society

Heat engine in the three-dimensional spacetime

Energy Technology Data Exchange (ETDEWEB)

Mo, Jie-Xiong [Institute of Theoretical Physics, Lingnan Normal University,Zhanjiang, 524048, Guangdong (China); Department of Physics, Lingnan Normal University,Zhanjiang, 524048, Guangdong (China); Liang, Feng [Department of Physics, Lingnan Normal University,Zhanjiang, 524048, Guangdong (China); Li, Gu-Qiang [Institute of Theoretical Physics, Lingnan Normal University,Zhanjiang, 524048, Guangdong (China); Department of Physics, Lingnan Normal University,Zhanjiang, 524048, Guangdong (China)

2017-03-02

We define a kind of heat engine via three-dimensional charged BTZ black holes. This case is quite subtle and needs to be more careful. The heat flow along the isochores does not equal to zero since the specific heat C{sub V}≠0 and this point completely differs from the cases discussed before whose isochores and adiabats are identical. So one cannot simply apply the paradigm in the former literatures. However, if one introduces a new thermodynamic parameter associated with the renormalization length scale, the above problem can be solved. We obtain the analytical efficiency expression of the three-dimensional charged BTZ black hole heat engine for two different schemes. Moreover, we double check with the exact formula. Our result presents the first specific example for the sound correctness of the exact efficiency formula. We argue that the three-dimensional charged BTZ black hole can be viewed as a toy model for further investigation of holographic heat engine. Furthermore, we compare our result with that of the Carnot cycle and extend the former result to three-dimensional spacetime. In this sense, the result in this paper would be complementary to those obtained in four-dimensional spacetime or ever higher. Last but not the least, the heat engine efficiency discussed in this paper may serve as a criterion to discriminate the two thermodynamic approaches introduced in ref. https://www.doi.org/10.1103/PhysRevD.92.124069 and our result seems to support the approach which introduces a new thermodynamic parameter R=r{sub 0}.

Advertising Violent Toys in Weekly Circulars of Popular Retailers in the United States

Directory of Open Access Journals (Sweden)

Corey H. Basch

2015-10-01

with fists out and aggressive faces (26%. Conclusion: Parents should be mindful of toy retailer’s marketing of violent toys, especially toward boys, and the potential for those toys to desensitize their children to violence.

Two-dimensional thermal modeling of power monolithic microwave integrated circuits (MMIC's)

Science.gov (United States)

Fan, Mark S.; Christou, Aris; Pecht, Michael G.

1992-01-01

Numerical simulations of the two-dimensional temperature distributions for a typical GaAs MMIC circuit are conducted, aiming at understanding the heat conduction process of the circuit chip and providing temperature information for device reliability analysis. The method used is to solve the two-dimensional heat conduction equation with a control-volume-based finite difference scheme. In particular, the effects of the power dissipation and the ambient temperature are examined, and the criterion for the worst operating environment is discussed in terms of the allowed highest device junction temperature.

A Two-Dimensional Human Minilung System (Model for Respiratory Syncytial Virus Infections

Directory of Open Access Journals (Sweden)

Esmeralda Magro-Lopez

2017-12-01

Full Text Available Human respiratory syncytial virus (HRSV is a major cause of serious pediatric respiratory diseases that lacks effective vaccine or specific therapeutics. Although our understanding about HRSV biology has dramatically increased during the last decades, the need for adequate models of HRSV infection is compelling. We have generated a two-dimensional minilung from human embryonic stem cells (hESCs. The differentiation protocol yielded at least six types of lung and airway cells, although it is biased toward the generation of distal cells. We show evidence of HRSV replication in lung cells, and the induction of innate and proinflammatory responses, thus supporting its use as a model for the study of HRSV–host interactions.

Optimizing gradient conditions in online comprehensive two-dimensional reversed-phase liquid chromatography by use of the linear solvent strength model

DEFF Research Database (Denmark)

Græsbøll, Rune; Janssen, Hans-Gerd; Christensen, Jan H.

2017-01-01

The linear solvent strength model was used to predict coverage in online comprehensive two-dimensional reversed-phase liquid chromatography. The prediction model uses a parallelogram to describe the separation space covered with peaks in a system with limited orthogonality. The corners of the par......The linear solvent strength model was used to predict coverage in online comprehensive two-dimensional reversed-phase liquid chromatography. The prediction model uses a parallelogram to describe the separation space covered with peaks in a system with limited orthogonality. The corners...... of the parallelogram are assumed to behave like chromatographic peaks and the position of these pseudo-compounds was predicted. A mix of 25 polycyclic aromatic compounds were used as a test. The precision of the prediction, span 0-25, was tested by varying input parameters, and was found to be acceptable with root...... factors were low, or when gradient conditions affected parameters not included in the model, e.g. second dimension gradient time affects the second dimension equilibration time. The concept shows promise as a tool for gradient optimization in online comprehensive two-dimensional liquid chromatography...

Bioaccessibility of As, Cd, Cu, Ni, Pb, and Sb in toys and low-cost jewelry.

Science.gov (United States)

Guney, Mert; Zagury, Gerald J

2014-01-21

Children can be exposed to toxic elements in toys and jewelry following ingestion. As, Cd, Cu, Ni, Pb, and Sb bioavailability was assessed (n = 24) via the in vitro gastrointestinal protocol (IVG), the physiologically based extraction test (PBET), and the European Toy Safety Standard protocol (EN 71-3), and health risks were characterized. Cd, Cu, Ni, and Pb were mobilized from 19 metallic toys and jewelry (MJ) and one crayon set. Bioaccessible Cd, Ni, or Pb exceeded EU migratable concentration limits in four to six MJ, depending on the protocol. Using two-phase (gastric + intestinal) IVG or PBET might be preferable over EN 71-3 since they better represent gastrointestinal physiology. Bioaccessible and total metal concentrations were different and not always correlated, indicating that bioaccessibility measurement may provide more accurate risk characterization. More information on impacts of multiple factors affecting metals mobilization from toys and jewelry is needed before recommending specific tests. Hazard index (HI) for Cd, Ni, or Pb were >1 for all six MJ exceeding the EU limits. For infants (6-12 mo old), 10 MJ had HI > 1 for Cd, Cu, Ni, or Pb (up to 75 for Cd and 43 for Pb). Research on prolonged exposure to MJ and comprehensive risk characterization for toys and jewelry exposure is recommended.

Two dimensional Hall MHD modeling of a plasma opening switch with density inhomogeneities

Energy Technology Data Exchange (ETDEWEB)

Zabaidullin, O [Kurchatov Institute, Moscow (Russian Federation); Chuvatin, A; Etlicher, B [Ecole Polytechnique, Palaiseau (France). Laboratoire de Physique des Milieux Ionises

1997-12-31

The results of two-dimensional numerical modeling of the Plasma Opening Switch in the MHD framework with Hall effect are presented. An enhanced Hall diffusion coefficient was used in the simulations. Recent experiments justify the application of this approach. The result of the modeling also correlates better with the experiment than in the case of the classical diffusion coefficient. Numerically generated pictures propose a switching scenario in which the translation between the conduction and opening phases can be explained by an abrupt `switching on` and further domination of the Hall effect at the end of the conduction phase. (author). 3 figs., 6 refs.

Parents as a Team: Mother, Father, a Child with Autism Spectrum Disorder, and a Spinning Toy

Science.gov (United States)

Maynard, Douglas W.; McDonald, T. A.; Stickle, Trini

2016-01-01

This paper is a single case study involving a visit to a diagnostic clinic for autism spectrum disorder. A young boy finds a toy that he can hold with one hand and spin with another. In order to retrieve the toy and leave it in the clinic, the parents engage in a team effort. We describe this achievement in terms of two styles of practice or…

Programmable Toys and Free Play in Early Childhood Classrooms

Science.gov (United States)

Newhouse, Christopher Paul; Cooper, Martin; Cordery, Zina

2017-01-01

This paper reports on a study that investigated the ways that young children interact with discrete programmable digital toys in a free play setting. One intention was to see whether this interaction would address some of the requirements of the Digital Technologies subject in the Australian Curriculum. The study was implemented in two phases in…

Hygiene of Toys in Day Care Centers: a Care With Children

Directory of Open Access Journals (Sweden)

Evelise Pires Cogo Simão

2017-03-01

Full Text Available Objective: to investigate how the hygiene of the toys used in day care centers and the possible tendencies in the processes are done. Method: descriptive, cross-sectional study, having as a unit of observation 51 day care centers. The object of investigation was the toy hygiene procedure, in which the information on the variables was obtained by interview and recorded in an online questionnaire. Results: It was observed that water and soap was the most used method of hygiene (72.5% and the periodicity of cleaning was 2 times a month or more in 50% of the units interviewed, and six nurseries declared no Such procedure. Conclusion: there was no standardized procedures in the toy hygiene technique used in the sample of nurseries studied. Although most institutions demonstrate intent to carry out the toy hygiene procedure, it is necessary to equip practitioners to deal with this issue. Descriptors: Day Care Centers; Fomites; Disinfection; Play Sets and Toys; Nursing.

Burn Injury Arise From Flying Balloon Toys

Directory of Open Access Journals (Sweden)

Yalcin Kulahci

2007-08-01

Full Text Available Many of peoples are faced minor or major burn injuries in their life. Even the most widespread burn cause is flame injuries, too different burn cause pointed out in literature like Acetylen burns. The cases which imply in literature, mostly causes from explosion of high pressure acetylene tube, metal oxygene patch flame or carbide lamp using from cave explorers. An interesting acetylene burn cause in Turkey was publised by the authors. This cases was to come into being from flying toy balloons flame. 80 person was injured from flying toy ballons flame in a meeting in 2002. Although this potential risks of acetylene, helium have not any of some risk. But helium was provided from other countries and have more price. The injuries which caused from acetylene burns like 1st -2nd degree burns. Consequently that was known helium is more avaliable for using in toy sector, and never cause burn injuries like this. [TAF Prev Med Bull. 2007; 6(4: 291-296

A Dirac-Kaehler approach to the two dimensional Wess-Zumino N=2 model on the lattice

International Nuclear Information System (INIS)

Zimerman, A.H.; Aratyn, H.

1983-08-01

We introduce a Dirac-Kaehler model for the two dimensional Wess-Zumino N=2 Lagrangean. We can show that in the model, when we go to the euclidean space-time lattive, we have no energy doubling, the action has no lattice surface terms (contrary to other authors), while the Hamiltonians (when time is continuous) present lattice surface terms. (orig.)

[Benefits from the use of toys during nursing care delivered to hospitalized children].

Science.gov (United States)

Jansen, Michele Ferraz; dos Santos, Rosane Maria; Favero, Luciane

2010-06-01

It is a qualitative research study, descriptive-exploratory in nature, which aims to verify the benefits from the use of toys during nursing care to hospitalized children. Ten subjects participated in the study: three children and seven mothers of hospitalized children. Data were collected between May and July, 2008 by means of specific instruments for each age group and further organized in thematic categories: the use of toys to lessen hospitalization stress; toys facilitating understanding and acceptance of procedures; and the experience of using toys and hospitalization process. The results show that the use of toys is an excellent nursing resource to render care to admitted children. The features of the toys facilitated communication, participation, acceptance of procedure and child motivation, what enabled them to keep their individuality, lessen the stress and the possibility to implement children's and families' non-traumatic care.

Toys That Squeak: Toy Type Impacts Quality and Quantity of Parent-Child Interactions

Science.gov (United States)

Miller, Jennifer L.; Lossia, Amanda; Suarez-Rivera, Catalina; Gros-Louis, Julie

2017-01-01

Given the dependent nature of parent-infant interactions necessary for language development, it is important to understand how context may influence these interactions. This study examines how contextual variables influence communicative, cognitive and social measures of parent-infant interactions. Specifically, how do feedback toys and…

Efficient processing of two-dimensional arrays with C or C++

Science.gov (United States)

Donato, David I.

2017-07-20

Because fast and efficient serial processing of raster-graphic images and other two-dimensional arrays is a requirement in land-change modeling and other applications, the effects of 10 factors on the runtimes for processing two-dimensional arrays with C and C++ are evaluated in a comparative factorial study. This study’s factors include the choice among three C or C++ source-code techniques for array processing; the choice of Microsoft Windows 7 or a Linux operating system; the choice of 4-byte or 8-byte array elements and indexes; and the choice of 32-bit or 64-bit memory addressing. This study demonstrates how programmer choices can reduce runtimes by 75 percent or more, even after compiler optimizations. Ten points of practical advice for faster processing of two-dimensional arrays are offered to C and C++ programmers. Further study and the development of a C and C++ software test suite are recommended.Key words: array processing, C, C++, compiler, computational speed, land-change modeling, raster-graphic image, two-dimensional array, software efficiency

Tight-binding model of the photosystem II reaction center: application to two-dimensional electronic spectroscopy

International Nuclear Information System (INIS)

Gelzinis, Andrius; Valkunas, Leonas; Abramavicius, Darius; Fuller, Franklin D; Ogilvie, Jennifer P; Mukamel, Shaul

2013-01-01

We propose an optimized tight-binding electron–hole model of the photosystem II (PSII) reaction center (RC). Our model incorporates two charge separation pathways and spatial correlations of both static disorder and fast fluctuations of energy levels. It captures the main experimental features observed in time-resolved two-dimensional (2D) optical spectra at 77 K: peak pattern, lineshapes and time traces. Analysis of 2D spectra kinetics reveals that specific regions of the 2D spectra of the PSII RC are sensitive to the charge transfer states. We find that the energy disorder of two peripheral chlorophylls is four times larger than the other RC pigments. (paper)

Tight-binding model of the photosystem II reaction center: application to two-dimensional electronic spectroscopy

Science.gov (United States)

Gelzinis, Andrius; Valkunas, Leonas; Fuller, Franklin D.; Ogilvie, Jennifer P.; Mukamel, Shaul; Abramavicius, Darius

2013-07-01

We propose an optimized tight-binding electron-hole model of the photosystem II (PSII) reaction center (RC). Our model incorporates two charge separation pathways and spatial correlations of both static disorder and fast fluctuations of energy levels. It captures the main experimental features observed in time-resolved two-dimensional (2D) optical spectra at 77 K: peak pattern, lineshapes and time traces. Analysis of 2D spectra kinetics reveals that specific regions of the 2D spectra of the PSII RC are sensitive to the charge transfer states. We find that the energy disorder of two peripheral chlorophylls is four times larger than the other RC pigments.

Control Operator for the Two-Dimensional Energized Wave Equation

Directory of Open Access Journals (Sweden)

Sunday Augustus REJU

2006-07-01

Full Text Available This paper studies the analytical model for the construction of the two-dimensional Energized wave equation. The control operator is given in term of space and time t independent variables. The integral quadratic objective cost functional is subject to the constraint of two-dimensional Energized diffusion, Heat and a source. The operator that shall be obtained extends the Conjugate Gradient method (ECGM as developed by Hestenes et al (1952, [1]. The new operator enables the computation of the penalty cost, optimal controls and state trajectories of the two-dimensional energized wave equation when apply to the Conjugate Gradient methods in (Waziri & Reju, LEJPT & LJS, Issues 9, 2006, [2-4] to appear in this series.

Robotic Toys as a Catalyst for Mathematical Problem Solving

Science.gov (United States)

Highfield, Kate

2010-01-01

Robotic toys present unique opportunities for teachers of young children to integrate mathematics learning with engaging problem-solving tasks. This article describes a series of tasks using Bee-bots and Pro-bots, developed as part a larger project examining young children's use of robotic toys as tools in developing mathematical and metacognitive…

Modelling of oscillations in two-dimensional echo-spectra of the Fenna-Matthews-Olson complex

International Nuclear Information System (INIS)

Hein, Birgit; Kreisbeck, Christoph; Kramer, Tobias; Rodríguez, Mirta

2012-01-01

Recent experimental observations of time-dependent beatings in the two-dimensional echo-spectra of light-harvesting complexes at ambient temperatures have opened up the question of whether coherence and wave-like behaviour play a significant role in photosynthesis. We carry out a numerical study of the absorption and echo-spectra of the Fenna-Matthews-Olson (FMO) complex in Chlorobium tepidum and analyse the requirements in the theoretical model needed to reproduce beatings in the calculated spectra. The energy transfer in the FMO pigment-protein complex is theoretically described by an exciton Hamiltonian coupled to a phonon bath which accounts for the pigments' electronic and vibrational excitations, respectively. We use the hierarchical equations of motions method to treat the strong couplings in a non-perturbative way. We show that the oscillations in the two-dimensional echo-spectra persist in the presence of thermal noise and static disorder. (paper)

Critical Behaviour of a Two-Dimensional Random Antiferromagnet

DEFF Research Database (Denmark)

Als-Nielsen, Jens Aage; Birgeneau, R. J.; Guggenheim, H. J.

1976-01-01

A neutron scattering study of the order parameter, correlation length and staggered susceptibility of the two-dimensional random antiferromagnet Rb2Mn0.5Ni0.5F4 is reported. The system is found to exhibit a well-defined phase transition with critical exponents identical to those of the isomorphou...... pure materials K2NiF4 and K2MnF4. Thus, in these systems, which have the asymptotic critical behaviour of the two-dimensional Ising model, randomness has no measurable effect on the phase-transition behaviour....

Completely two-dimensional model for analysis of characteristics of linear induction cylindrical pump

International Nuclear Information System (INIS)

Kirillov, I.R.; Obukhov, D.M.

2005-01-01

One introduces a completely two-dimensional mathematical model to calculate characteristics of induction magnetohydrodynamic (MHD) machines with a cylindrical channel. On the basis of the numerical analysis one obtained a pattern of liquid metal flow in a electromagnetic pump at presence of the MHD-instability characterized by initiation of large-scale vortices propagating longitudinally and azimuthally. Comparison of the basic calculated characteristics of pump with the experiment shows their adequate qualitative and satisfactory quantitative coincidence [ru

Modelling Altitude Information in Two-Dimensional Traffic Networks for Electric Mobility Simulation

Directory of Open Access Journals (Sweden)

Diogo Santos

2016-06-01

Full Text Available Elevation data is important for electric vehicle simulation. However, traffic simulators are often two-dimensional and do not offer the capability of modelling urban networks taking elevation into account. Specifically, SUMO - Simulation of Urban Mobility, a popular microscopic traffic simulator, relies on networks previously modelled with elevation data as to provide this information during simulations. This work tackles the problem of adding elevation data to urban network models - particularly for the case of the Porto urban network, in Portugal. With this goal in mind, a comparison between different altitude information retrieval approaches is made and a simple tool to annotate network models with altitude data is proposed. The work starts by describing the methodological approach followed during research and development, then describing and analysing its main findings. This description includes an in-depth explanation of the proposed tool. Lastly, this work reviews some related work to the subject.

Predicting transition in two- and three-dimensional separated flows

International Nuclear Information System (INIS)

Cutrone, L.; De Palma, P.; Pascazio, G.; Napolitano, M.

2008-01-01

This paper is concerned with the numerical prediction of two- and three-dimensional transitional separated flows of turbomachinery interest. The recently proposed single-point transition model based on the use of a laminar kinetic energy transport equation is considered, insofar as it does not require to evaluate any integral parameter, such as boundary-layer thickness, and is thus directly applicable to three-dimensional flows. A well established model, combining a transition-onset correlation with an intermittency transport equation, is also used for comparison. Both models are implemented within a Reynolds-averaged Navier-Stokes solver employing a low-Reynolds-number k-ω turbulence model. The performance of the transition models have been evaluated and tested versus well-documented incompressible flows past a flat plate with semi-circular leading edge, namely: tests T3L2, T3L3, T3L5, and T3LA1 of ERCOFTAC, with different Reynolds numbers and free-stream conditions, the last one being characterized by a non-zero pressure gradient. In all computations, the first model has proven as adequate as or superior to the second one and has been then applied with success to two more complex test cases, for which detailed experimental data are available in the literature, namely: the two- and three-dimensional flows through the T106 linear turbine cascade

Design, development, and clinical validation of therapeutic toys for autistic children

OpenAIRE

Tseng, Kevin C.; Tseng, Sung-Hui; Cheng, Hsin-Yi Kathy

2016-01-01

[Purpose] One of the characteristics of autistic children is social interaction difficulties. Although therapeutic toys can promote social interaction, however its related research remains insufficient. The aim of the present study was to build a set of cooperative play toys that are suitable for autistic children. [Subjects and Methods] This study used an innovative product design and development approach as the basis for the creation of cooperative play toys. [Results] The present study has...

A randomized clinical trial in preterm infants on the effects of a home-based early intervention with the 'CareToy System'

DEFF Research Database (Denmark)

Sgandurra, Giuseppina; Lorentzen, Jakob; Inguaggiato, Emanuela

2017-01-01

and visual development in preterm infants. 41 preterm infants (range age: 3.0-5.9 months of corrected age) were enrolled and randomized into two groups, CareToy and Standard Care. 19 infants randomized in CareToy group performed a 4-week CareToy program, while 22 allocated to control group completed 4 weeks......CareToy system is an innovative tele-rehabilitative tool, useful in providing intensive, individualized, home-based, family-centred Early Intervention (EI) in infants. Our aim was to evaluate, through a Randomized Clinical Trial (RCT) study, the effects of CareToy intervention on early motor...... of Standard Care. Infant Motor Profile (IMP) was primary outcome measure, Alberta Infant Motor Scale (AIMS) and Teller Acuity Cards were secondary ones. Assessments were carried out at baseline (T0) and at the end of CareToy training or Standard Care period (T1). T1 was the primary endpoint. After RCT phase...

Inducing self-organized criticality in a network toy model by neighborhood assortativity.

Science.gov (United States)

Allen-Perkins, Alfonso; Galeano, Javier; Pastor, Juan Manuel

2016-11-01

Complex networks are a recent type of framework used to study complex systems with many interacting elements, such as self-organized criticality (SOC). The network nodes' tendency to link to other nodes of similar type is characterized by assortative mixing. Real networks exhibit assortative mixing by vertex degree, however, typical random network models, such as the Erdős-Rényi or the Barabási-Albert model, show no assortative arrangements. In this paper we introduce the notion of neighborhood assortativity as the tendency of a node to belong to a community (its neighborhood) showing an average property similar to its own. Imposing neighborhood assortative mixing by degree in a network toy model, SOC dynamics can be found. These dynamics are driven only by the network topology. The long-range correlations resulting from criticality have been characterized by means of fluctuation analysis and show an anticorrelation in the node's activity. The model contains only one parameter and its statistics plots for different values of the parameter can be collapsed into a single curve. The simplicity of the model allows us to perform numerical simulations and also to study analytically the statistics for a specific value of the parameter, making use of the Markov chains.

Using Toys to Support Infant-Toddler Learning and Development

Science.gov (United States)

Guyton, Gabriel

2011-01-01

Choosing toys and activities that are suitable for infants and toddlers can challenge even the most experienced teacher. By being mindful of the basic principles of child development and the role of play, teachers can intentionally select toys to meet young children's unique needs and interests, supporting learning. It is also important to be…

Science toys

Science.gov (United States)

Crease, Robert P.

2009-01-01

"I have a low boredom threshold," Tim Rowett explains, ushering in my son Alex and me. Rowett is a jovial, professorishlooking man with wire-rimmed glasses and a short, white beard. Alex and I have gone to his flat in Twickenham, on the edge of London, to see his collection of fun stuff - jokes, games, puzzles and other toys related to science. When I ask what they have in common, Rowett has a ready, if not illuminating, answer: "They're just things that make people go 'Wow!'."

Linear negative magnetoresistance in two-dimensional Lorentz gases

Science.gov (United States)

Schluck, J.; Hund, M.; Heckenthaler, T.; Heinzel, T.; Siboni, N. H.; Horbach, J.; Pierz, K.; Schumacher, H. W.; Kazazis, D.; Gennser, U.; Mailly, D.

2018-03-01

Two-dimensional Lorentz gases formed by obstacles in the shape of circles, squares, and retroreflectors are reported to show a pronounced linear negative magnetoresistance at small magnetic fields. For circular obstacles at low number densities, our results agree with the predictions of a model based on classical retroreflection. In extension to the existing theoretical models, we find that the normalized magnetoresistance slope depends on the obstacle shape and increases as the number density of the obstacles is increased. The peaks are furthermore suppressed by in-plane magnetic fields as well as by elevated temperatures. These results suggest that classical retroreflection can form a significant contribution to the magnetoresistivity of two-dimensional Lorentz gases, while contributions from weak localization cannot be excluded, in particular for large obstacle densities.

Low-income fathers’ speech to toddlers during book reading versus toy play*

Science.gov (United States)

Salo, Virginia C.; Rowe, Meredith L.; Leech, Kathryn A.; Cabrera, Natasha J.

2016-01-01

Fathers’ child-directed speech across two contexts was examined. Father–child dyads from sixty-nine low-income families were videotaped interacting during book reading and toy play when children were 2;0. Fathers used more diverse vocabulary and asked more questions during book reading while their mean length of utterance was longer during toy play. Variation in these specific characteristics of fathers’ speech that differed across contexts was also positively associated with child vocabulary skill measured on the MacArthur-Bates Communicative Development Inventory. Results are discussed in terms of how different contexts elicit specific qualities of child-directed speech that may promote language use and development. PMID:26541647

Low-income fathers' speech to toddlers during book reading versus toy play.

Science.gov (United States)

Salo, Virginia C; Rowe, Meredith L; Leech, Kathryn A; Cabrera, Natasha J

2016-11-01

Fathers' child-directed speech across two contexts was examined. Father-child dyads from sixty-nine low-income families were videotaped interacting during book reading and toy play when children were 2;0. Fathers used more diverse vocabulary and asked more questions during book reading while their mean length of utterance was longer during toy play. Variation in these specific characteristics of fathers' speech that differed across contexts was also positively associated with child vocabulary skill measured on the MacArthur-Bates Communicative Development Inventory. Results are discussed in terms of how different contexts elicit specific qualities of child-directed speech that may promote language use and development.