WorldWideScience

Sample records for trilaurylamine methodes analytiques

  1. Analytical methods used in plutonium purification cycles by trilaurylamine

    International Nuclear Information System (INIS)

    Perez, J.J.

    1965-01-01

    The utilisation of trilaurylamine as a solvent extractant for the purification of plutonium has entailed to perfect a set of analytical methods which involves, various techniques. The organic impurities of the solvent can be titrated by gas-liquid chromatography. The titration of the main degradation product, the di-laurylamine, can be accomplished also by spectro-colorimetry. Potentiometry is used for the analysis of the different salts of amine-nitrate-sulfate-bisulfate as also the extracted nitric acid. The determination of the nitrate in aqueous phase is carried out by constant current potentiometry. The range of application, the accuracy and the procedure of these analysis are related in the present report. (author) [fr

  2. Potentiometric determination of free nitric-acid in trilaurylamine solutions containing plutonium nitrate

    International Nuclear Information System (INIS)

    Perez, J.J.; Saey, J.C.

    1965-01-01

    A potentiometric method of determination of the free nitric acid in trilaurylamine solutions containing plutonium or thorium nitrates is described. The potentiometric titration is carried out in a mixture of benzene and 1,2-dichloro ethane with a standard solution of trilaurylamine as the titrant. When thorium nitrate is present the metal complex is not dissociated then the titration has a single end-point. In the case of plutonium nitrate the partial dissociation of the plutonium complex corresponds to a second point. The experimental error in duplicate analyses of 50 samples is about 1 per cent for free acid concentrations in the range of 0,03 to 0,1 N and plutonium concentrations between 1 to 5 g/l. (authors) [fr

  3. Elimination of di-laurylamine from the trilaurylamine-dodecane solvent; Elimination de la dilaurylamine du solvant trilaurylamine-dodecane

    Energy Technology Data Exchange (ETDEWEB)

    Germain, M.; Bathellier, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    Di-laurylamine and carboxylic acids are the main degradation products of the trilaurylamine solvent. Di-laurylamine can be separated from the TLA by the precipitation of very slightly soluble di-laurylammonium salts. The main factors governing this removal and the subsequent filtration have been studied. The chemical stability of the solvent after the above treatment using different salts has been measured. From these considerations it appears that di-laurylammonium formiate precipitation gives satisfactory results. (authors) [French] Les principaux produits de degradation du solvant trilaurylamine sont la dilaurylamine et les acides carboxyliques. La dilaurylamine peut etre separee de la trilaurylamine par la precipitation de sels de dilaurylammonium, tres peu solubles. Les principaux facteurs influant sur cette elimination et la filtration qui s'en suit ont ete etudies. La stabilite chimique du solvant apres ce traitement avec differents sels a ete mesuree. De l'ensemble de ces considerations, il apparait que la precipitation du formiate de dilaurylamine donne des resultats satisfaisants. (auteurs)

  4. Attempts to determine the thermodynamic activities of trilaurylamine nitrate in an organic phase

    International Nuclear Information System (INIS)

    Pires de Matos, A.; Maddock, A.G.

    1978-01-01

    In order to obtain the thermodynamic activities of trilaurylamine nitrate in several diluents, attempts were made to determine the concentrations of the amine in aqueous phases previously equilibrated with the organic phases. In all the experiments made with trilaurylamine nitrate in toluene, benzene, carbon tetrachloride, heptane, cyclohexane, ortodichlorobenzene and n-butylacetate, the concentration of the amine nitrate in the aqueous phase ranged from 10 -8 to 10 -6 M. The figures below 10 -7 were obtained by extrapolation. The results obtained did not seem to be quite reproducible and varied with the time allowed for the separation of the phases before centrifugation and even with the time of centrifugation. (T.I.)

  5. La microscopie ionique analytique des tissus biologiques

    Science.gov (United States)

    Galle, P.

    Proposed in 1960 by R. Castaing and G. Slodzian, secondary ion emission microanalysis is a microanalytical method which is now largely used for the study of inert material. The instrument called the analytical ion microscope can also be used for the study of biological spécimens ; images representing the distribution of a given stable or radioactive isotope in a tissue section are obtained with a resolution of 0.5 μm. Among the characteristics of this method, two are of particular interest in biological research : its capacity for isotopic analysis and its very high sensitivity which makes possible for the first time a chemical analysis of element at a very low or even at a trace concentration in a microvolume. Proposé en 1960 par R. Castaing et G. Slodzian, la microanalyse par émission ionique secondaire est une méthode qui permet, entre autre, d'obtenir des images représentant la distribution des isotopes présents à la surface d'un échantillon solide avec une résolution de 0,5 μm. D'intérêt très général, cette méthode a été d'abord largement utilisée pour l'étude des matériaux inertes. Elle offre en outre des possibilités entièrement nouvelles dans le domaine de la recherche biomédicale. L'instrument réalisé, le microscope ionique analytique présente deux caractéristiques particulièrement intéressantes pour la biologie : la possibilité d'analyse isotopique, et l'extrême sensibilité permettant de détecter et de localiser dans une coupe histologique des éléments à des concentrations très faibles voire à l'état de trace.

  6. Contribution to the study of the process of purification of plutonium by extraction with trilaurylamine

    International Nuclear Information System (INIS)

    Saey, Jean-Claude

    1966-01-01

    This work addresses the process of plutonium purification which uses trilaurylamine nitrate. In order to use this nitrate in its solid state and at ordinary temperature, a secondary solvent must be added which must have some properties: low volume mass and viscosity, high boiling and ignition temperatures, rather low miscibility with water, high stability in front of joint actions of nitric acid and radiations, and no reaction with the alkylammonium nitrate and the complex. Thus, the author addresses phenomena of immiscibility and identifies some important molecular characteristics which could lead to the selection of another secondary solvent than dodecane. The decalin seem interesting and its behaviour is studied. A mixing of dodecane and decalin is used as extraction mixing. The obtained results are discussed. Finally, the author notices that using this mixing in the plutonium purification process results in a large increase of metal concentrations and a decrease of risks of crystallisation, without any major drawback, in a continuously operating micro-industrial installation

  7. Biological behaviour of plutonium given as a trilaurylamine complex. Comparison with plutonium-tributylphosphate

    International Nuclear Information System (INIS)

    Nolibe, D.; Duserre, C.; Gil, I.; Rateau, G.; Metivier, H.

    1989-01-01

    The biokinetics of plutonium (Pu) were compared in rats after its administration by inhalation or intramuscular injection as Pu-trilaurylamine (Pu-TLA) or Pu-tri-n-butylphosphate (Pu-TBP). To study the mass effect, 238 Pu and 239 Pu were used. Translocation from the lungs and injection site was faster for 238 Pu than 239 Pu, and faster for Pu-TLA than Pu-TBP. The skeleton was always the main organ of deposition of the transferable Pu fraction. At 50 days after inhalation, the skeletal content, in per cent of the body content at death was 10% for 239 Pu-TBP, 54% for 238 Pu-TBP, 24% for 239 Pu-TLA and 62% for 238 Pu-TLA. The amounts in the liver were respectively 2, 6, 3, and 10% of the body content. Thirty days after intramuscular injection of 239 Pu-TLA, more Pu was translocated than after 239 Pu-TBP (26% versus 16%) and the skeletal deposit was 10 times the deposit in the liver. DTPA therapy after inhalation or injection of 238 Pu-TLA reduced the skeletal content by 35-58% with a corresponding increase in urinary excretion. (author)

  8. Les origines de la philosophie analytique de la religion

    Directory of Open Access Journals (Sweden)

    Nicholas Wolterstorff

    2012-07-01

    Full Text Available Il y a soixante ans, il y avait peu de philosophie de la religion et à peu près rien en ce qui concerne la théologie philosophique ; aujourd’hui, la philosophie de la religion en général, et la théologie philosophique en particulier, prospèrent dans la tradition analytique de la philosophie. Mon but est d’expliquer pourquoi la situation actuelle est si différente de celle d’il y a soixante ans.

  9. Méthode analytique généralisée pour le calcul du coning. Nouvelle solution pour calculer le coning de gaz, d'eau et double coning dans les puits verticaux et horizontaux Generalized Analytical Method for Coning Calculation. New Solution to Calculation Both the Gas Coning, Water Coning and Dual Coning for Vertical and Horizontal Wells

    Directory of Open Access Journals (Sweden)

    Pietraru V.

    2006-11-01

    Full Text Available Une nouvelle méthode analytique d'évaluation du coning d'eau par bottom water drive et/ou de gaz par gas-cap drive dans les puits horizontaux et verticaux a été développée pour les réservoirs infinis [1]. Dans cet article, une généralisation de cette méthode est présentée pour les réservoirs confinés d'extension limitée dont le toit est horizontal. La généralisation proposée est basée sur la résolution des équations différentielles de la diffusivité avec prise en compte des effets de drainage par gravité et des conditions aux limites pour un réservoir confiné. La méthode est applicable aux réservoirs isotropes ou anisotropes. L'hypothèse de pression constante à la limite de l'aire de drainage dans l'eau et/ou dans le gaz a été adoptée. Les pertes de charge dans l'aquifère et dans le gas-cap sont donc négligées. Les principales contributions de cet article sont : - L'introduction de la notion de rayon de cône, différent du rayon de puits. La hauteur du cône et le débit critique dépendent du rayon de cône alors qu'ils sont indépendants du rayon du puits. - Une nouvelle corrélation pour le calcul du débit critique sous forme adimensionnelle en fonction de trois paramètres : le temps, la longueur du drain horizontal (nulle pour un puits vertical et le rayon de drainage. - Des corrélations pour le calcul du rapport des débits gaz/huile (GOR ou de la fraction en eau (fw, pendant les périodes critique et postcritique, qui tiennent compte de la pression capillaire et des perméabilités relatives. - Des corrélations pour le calcul des rapports de débits gaz/huile et eau/huile pendant les périodes pré, post et supercritique en double coning. - Des critères pour le calcul du temps de percée au puits en simple coning de gaz ou d'eau, ou en double coning de gaz et d'eau. A new analytical method for assessing water and/or gas coning in horizontal and vertical wells has been developed for infinite

  10. Epidémiologie des traumatismes: quelles contributions des (méthodes) statistiques aux approches descriptive et analytique?

    OpenAIRE

    Senterre, Christelle

    2014-01-01

    L’épidémiologie de terrain peut être définie comme un ensemble de méthodes de collecte et de traitement de l’information combinant successivement les approches de l’épidémiologie descriptive mais aussi celles de l’épidémiologie analytique. La finalité de l’analyse descriptive sera de décrire et de quantifier la survenue du phénomène étudié dans une population donnée, permettant ainsi la formulation d’hypothèses préalables à la phase analytique. Phase, qui se focalisera sur les "associations" ...

  11. Kant et le renouveau de la pratique « analytique » dans la philosophie contemporaine

    Directory of Open Access Journals (Sweden)

    Pamela Sue Anderson

    2012-07-01

    Full Text Available Cet essai incite les philosophes contemporains de la religion à repenser le rôle que la philosophie critique de Kant a joué à la fois dans l’inauguration de la nature analytique de la philosophie moderne et dans le développement de la poussée de la critique de la raison vers l’inconditionné. En particulier, il s’agit, dans cet essai, de démontrer que Kant et d’autres rationalistes modernes, comme Spinoza, peuvent contribuer à notre lutte rationnelle dans la vérité et pour elle. Cette démonstration vise un groupe récent de philosophes analytiques de la religion qui ont nommé leur propre travail « théologie analytique » et ont suscité de nouvelles discussions, y compris de nouveaux arguments sur Kant jetant un pont entre la philosophie et la théologie. La culture de l’ouverture réflexive et critique est ici encouragée pour contrôler les prétentions excessives concernant Dieu.

  12. Coupling an analytical description of anti-scatter grids with simulation software of radiographic systems using Monte Carlo code; Couplage d'une methode de description analytique de grilles anti diffusantes avec un logiciel de simulation de systemes radiographiques base sur un code Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Rinkel, J.; Dinten, J.M.; Tabary, J

    2004-07-01

    The use of focused anti-scatter grids on digital radiographic systems with two-dimensional detectors produces acquisitions with a decreased scatter to primary ratio and thus improved contrast and resolution. Simulation software is of great interest in optimizing grid configuration according to a specific application. Classical simulators are based on complete detailed geometric descriptions of the grid. They are accurate but very time consuming since they use Monte Carlo code to simulate scatter within the high-frequency grids. We propose a new practical method which couples an analytical simulation of the grid interaction with a radiographic system simulation program. First, a two dimensional matrix of probability depending on the grid is created offline, in which the first dimension represents the angle of impact with respect to the normal to the grid lines and the other the energy of the photon. This matrix of probability is then used by the Monte Carlo simulation software in order to provide the final scattered flux image. To evaluate the gain of CPU time, we define the increasing factor as the increase of CPU time of the simulation with as opposed to without the grid. Increasing factors were calculated with the new model and with classical methods representing the grid with its CAD model as part of the object. With the new method, increasing factors are shorter by one to two orders of magnitude compared with the second one. These results were obtained with a difference in calculated scatter of less than five percent between the new and the classical method. (authors)

  13. Milieux relationnels Xpey’ : un cadre analytique pour conceptualiser l’équité en santé autochtone

    Directory of Open Access Journals (Sweden)

    Alexandra Kent

    2017-01-01

    Full Text Available Introduction : Si la recherche sur l’équité en santé et la recherche sur la santé autochtone ont toutes deux pour objectif de promouvoir des résultats équitables en santé parmi les populations marginalisées et à moindre accès aux soins, elles fonctionnent souvent de manière indépendante et sans collaboration, conduisant à une sous-représentation des populations autochtones dans la recherche sur l’équité en santé relativement au fardeau disproportionné des inégalités subies. Dans cet article méthodologique, nous présentons Milieux relationnels Xpey’, un cadre analytique qui décrit certains obstacles et éléments facilitateurs en matière d’équité en santé pour les peuples autochtones. Méthodologie : La recherche sur l’équité en santé doit se concentrer sur les populations autochtones et les méthodologies autochtonisées, changement qui pourrait combler les lacunes dans les connaissances et contribuer à combler le fossé observé en santé autochtone. Dans ce cadre, le programme de recherche Optique d’équité en santé publique (Equity Lens in Public Health, ELPH a adopté le cadre analytique Milieux relationnels Xpey’ pour que la recherche sur la priorisation et la mise en oeuvre de l’équité en santé soit davantage centrée sur les populations autochtones. Le cadre analytique a ajouté à notre méthodologie une optique autochtonisée d’équité en santé qui a facilité la reconnaissance des déterminants sociaux, structurels et systémiques de la santé autochtone. Pour éprouver ce cadre analytique, nous avons mené une étude de cas pilote portant sur l’une des autorités sanitaires régionales de la Colombie-Britannique, consistant en un examen des politiques et des plans de référence et intégrant des entrevues et des groupes de travail avec du personnel de première ligne, des gestionnaires et des hauts dirigeants. Conclusion : L’application à ELPH de Milieux relationnels Xpey

  14. Étude de la microstructure de couches minces par diffraction des rayons X : description analytique des profils de raie

    Science.gov (United States)

    Boulle, A.; Guinebretière, R.; Dauger, A.

    2004-11-01

    Nous proposons un modèle cinématique permettant de décrire de façon analytique les profils de raie de diffraction des rayons X de couches minces épitaxiées. Comparé aux modèles analytiques existant, celui-ci permet de prendre en compte plusieurs types de défauts simultanément, notamment la rugosité du substrat, celle de la surface de la couche, et les fluctuations aléatoires (cumulatives ou non) de distance interréticulaire. Cette description peut s'appliquer aux cas de couches minces nanométriques (de quelques dizaines de nanomètres à quelques centaines de nanomètres) ainsi qu'aux couches ultra-minces (quelques Ångstroms). Les profils de raie sont affectés différemment selon la nature des défauts présents, ce qui permet d'envisager l'application de ce modèle pour la détermination quantitative des propriétés microstructurales des couches de façon simple et routinière.

  15. Etude analytique et numérique de la réponse en vibration à hautes fréquences d'éprouvettes de fatigue vibratoire des métaux. Application aux aciers

    Science.gov (United States)

    Ben Aich, A.; El Kihel, B.; Kifani, A.; Sahban, F.

    1994-07-01

    In the present paper, the so-called " ultrasonic fatigue " or fatigue at very high frequency has been studied in the materials elastic behaviour case while neglecting the thermal effects that influence the mechanical fields. The determination of mechanical fields and specimen resonance length has been done both analytically and numerically. The numerical method used for this calculation is the finite element method (FEM). Martensitic steel " Soleil A2 " and austenitic steel " ICL 472 BC " have been considered in order to compare the two methods (analytical and numerical). It is shown that a perfect convergence is obtained between the two solutions. Dans le présent travail, la fatigue vibratoire a été étudiée dans le cas du comportement élastique des matériaux en négligeant les effets thermiques pouvant influencer les champs mécaniques. La détermination de ces champs et de la longueur de résonance des éprouvettes de fatigue a été faite analytiquement et numériquement. Le calcul numérique effectué se base sur la méthode des éléments finis. Dans le but d'une comparaison des solutions analytiques et numériques, deux aciers ont été considérés : un acier martensitique (Soleil A2) et un acier austénitique de type 18-10 (ICL 472 BC). Une parfaite convergence est obtenue entre les deux solutions.

  16. Comment adéquatement déclarer valide ou non valide une méthode analytique ?

    OpenAIRE

    Rozet, Eric; Hubert, Philippe

    2011-01-01

    Vu le rôle central que jouent les méthodes d’analyse dans l’ensemble des activités tant de l’industrie (bio)pharmaceutique, agro-alimentaire, chimique ou dans l’environnement, il est essentiel de les valider. Les critères de validation ne sont pas une finalité et il est nécessaire de rappeler l’objectif d’une méthode analytique et de sa validation afin de planifier adéquatement cette étape de validation. Par ailleurs, les approches de décision habituelles qui se basent seulement sur des estim...

  17. Contribution to the development of new analytical methods by the coupling between capillary electrophoresis and mass spectrometry (ICP-MS and ESI-MS): applications to the nuclear and biological fields; Contribution au developpement de nouvelles methodes analytiques par le couplage entre l'electrophorese capillaire et la spectrometrie de masse (ICP-MS et ESI-MS): applications dans les domaines nucleaires et biologiques

    Energy Technology Data Exchange (ETDEWEB)

    Pitois, A

    2006-04-15

    The coupling between chromatographic and electrophoretic separation techniques and mass spectrometry is used to combine the efficiency of the separation technique to the selectivity and sensitivity of the detectors. In this work, the number of applications of the CE-MS couplings has been increased. New analytical methods have been set up in the nuclear and biological fields. New analytical methods for the determination of fission products (cesium and lanthanides) have been developed by CE-ICP-MS. They enable to determine both concentration and isotopic composition of the fission products for very low detection limits (ng/mL by CE-Q-ICPMS, pg/mL by CE-HR-ICP-MS), since all the isobaric interferences are resolved. Moreover, only some nano-liters of sample are necessary to perform the analysis. These method have been applied with success to a simulated sample of spent fuel, to a nuclear sample from PUREX process and to a leaching of MOX fuel. Then, lanthanides have been analysed by CE-ESI-MS and the capability of ESI-MS to provide structural information has been studied. Elementary information has been obtained for strong potentials. Structural information has been obtained for low potentials. Finally, a new analytical method by CE-ESI-MS for the determination of 10B-boronophenylalanine (10B-BPA) has been developed for Boron Neutron Capture Therapy (BNCT). It has been applied to the cellular lines F98 and HUVEC. This CE-ESI-MS method has been validated by HR-ICP-MS. It enables a direct quantification of the chemical form 10B-BPA in samples of limited size (some nano-liters) and for low concentrations (ng/mL). As a consequence, this CE-ESI-MS method has enabled the study of the kinetics of 10B-BPA release and uptake for the F98 cells. (author)

  18. Convection naturelle dans une cavité horizontale occupée par deux fluides non miscibles : solution analytique et numérique

    OpenAIRE

    Oueslati, Fakhreddine; Bennacer, Rachid; Sammouda, Habib; Belghith, Ali

    2007-01-01

    International audience; La convection naturelle, dans le cas de deux fluides non miscibles superposés dans une cavité horizontalement allongée, est étudiée numériquement et analytiquement. Les frontières horizontales sont soumises à des flux thermiques croisés. La solution analytique, basée sur l'approximation d'écoulements parallèles, s'avère en bon accord avec la solution numérique. L'existence d'écoulements naturels et antinaturels est démontrée. Les solutions multiples d'état d'équilibre ...

  19. One-Dimensional Modelling of Polymer Flood Performance. Analytical and Graphical Solutions Modélisation de l'efficacité du déplacement unidimensionnel par injection de polymères. Solutions analytiques et graphiques

    Directory of Open Access Journals (Sweden)

    Grattoni C. A.

    2006-11-01

    Full Text Available A graphical method for simulating linear polymer flooding is proposed. The method is based upon the analytical solution of Darcy's law and continuity equation which describe the two-phase, one-dimensional, incompressible flow of oil and polymer solution through the reservoir rock. Continuous polymer injection and polymer slug injection are considered. Several physical mechanisms determining microscopic displacement efficiency are taken into account: resistance factor, residual resistance factor, retention composed by adsorption and mechanical entrapment, and inaccessible pore volume. Other properties are not considered: mixing and dispersion, shear and thermal degradation. This analytical-graphical model closely reproduces linear laboratory oil displacement experiments. Consequently, it can be used by the Field Engineer to rapidly estimate the additional oil recoverable by a linear polymer flood. On propose dans cet article une méthode graphique de simulation de l'injection de polymères dans le cas unidimensionnel. Cette méthode est basée sur la solution analytique de la loi de Darcy et de l'équation de continuité qui décrivent l'écoulement diphasique incompressible unidimen-sionnel d'huile et d'une solution de polymères à travers la roche réservoir. On examine l'injection continue et l'injection de bouchons de polymères. On prend en compte plusieurs mécanismes physiques qui déterminent l'efficacité du déplacement microscopique : facteur de ré-sistance, facteur de résistance résiduel, rétention due à l'adsorption et au piégeage mécanique et, enfin, volume des pores inacessibles. On ne tient pas compte des autres propriétés : mélange et dispersion, dégradation mécanique et thermique. Ce modèle analytique et graphique reproduit très directement les expériences de laboratoire de déplacement d'huile en milieu unidimensionnel. II peut donc être utilisé par l'ingénieur de chantier pour une estimation rapide de l

  20. Analytical representation of time correlation functions and application to relaxation problems; Representation analytique des fonctions de correlation temporelle et application a des problemes de relaxation

    Energy Technology Data Exchange (ETDEWEB)

    Dupuis, M. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, departement de physico-chimie, services des isotopes stables

    1971-07-01

    Two analytical representations of the Laplace transform of the time autocorrelation of a dynamical variable, namely the moment expansion and Mori's continued fraction expansion, are investigated from the point of view of structure and convergence properties, and the relation between them is established. The general theory is applied first to a dynamical model exactly solvable, the isotopic impurity in a linear chain of coupled harmonic oscillators, and then to two stochastic models recently introduced by Gordon for the rotational diffusion of molecules. In the latter case, the continued fraction expansion yields simple analytical expressions for the infrared absorption band shapes, showing that these models contain all the features of observed shapes in compressed gases, liquids and solutions. (author) [French] Deux representations analytiques de la transformee de Laplace de la fonction d'autocorrelation temporelle d'une variable dynamique, le developpement en moments et le developpement en fraction continue recemment introduit par Mori, sont etudiees du point de vue de leurs proprietes de structure et de convergence, en meme temps que la relation qui existe entre elles est etablie. La theorie generale est appliquee, d'une part, a un modele dynamique exactement soluble, celui d'une particule isotopique dans une chaine lineaire d'oscillateurs harmoniques couples, et, d'autre part, a deux modeles stochastiques recemment proposes par Gordon pour la diffusion rotationnelle des molecules. Dans ce dernier cas, la voie de la fraction continue fournit des expressions analytiques simples pour les formes de bande d'absorption infrarouge, montrant que ces modeles possedent les caracteristiques des formes observees dans les gaz comprimes, les liquides ou les solutions. (auteur)

  1. A new method for dosing rhodamine B in natural water

    International Nuclear Information System (INIS)

    Marichal, M.; Benoit, R.

    1961-01-01

    A simple and sensitive method well adapted to hydrological research. The dye is first extracted from the water sample by isoamyl alcohol and then the fluorescence of the alcoholic solution, after excitation by ultraviolet radiation, is measured spectrophotometrically. The sensitivity of the method is about 10 -12 , that is, a millionth of a milligram of dye per litre. Reprint of a paper published in 'Chimie Analytique', N. 2, Feb 1962, p. 70-72 [fr

  2. La métaphore entre sémantique et ontologie. La réception de la philosophie analytique du langage dans l'herméneutique de Paul Ricœur

    Directory of Open Access Journals (Sweden)

    Jean-Marc Tétaz

    2014-07-01

    Full Text Available  AbstractThe favourable reception of the analytic philosophy of language plays a central role in the composition of Ricœur’s literary hermeneutics. Following a brief description of the historical and methodological context of this reception, we show how Ricœur intends to link up phenomenology and analytic philosophy of language. Then we examine the role allocated to the analytic philosophy of language in establishing the idea of metaphor as a “more fundamental mode of reference” in The Rule of Metaphor. But once again Ricœur situates this semantic interpretation of metaphor within the context of an ontology. The result is methodological difficulties that mark the limits of Ricœur’s reception of the analytic philosophy of language.Keywords: Semantics, Metaphor, Ontology, Structuralism, Poetics.RésuméLa réception de la philosophie analytique du langage joue un rôle central dans la constitution de l’herméneutique littéraire de Ricœur. Après avoir tracé le cadre historique et systématique dans lequel s’inscrit cette réception, on montre comment Ricœur se propose d’articuler phénoménologie et philosophie analytique du langage. On étudie ensuite le rôle assigné à la philosophie analytique du langage pour la mise en place de la conception de la métaphore comme “mode plus fondamental de la référence” dans La métaphore vive. Mais Ricœur situe encore une fois cette interprétation sémantique de la métaphore dans un cadre ontologique. Il en résulte des difficultés systématiques qui marquent les limites de la réception de la philosophie analytique du langage par Ricœur.Mots-clés: Sémantique, Métaphore, Ontologie, Structuralisme, Poétique.

  3. Grandeurs caractéristiques de la machine synchrone obtenues analytiquement à partir d'une réduction de modèle par une technique des multiéchelles de temps

    OpenAIRE

    Guesbaoui , H.

    1995-01-01

    Il est bien connu qu'il n'est pas possible d'avoir une écriture simple des courants et des tensions pour une machine synchrone modélisée par plus d'un amortisseur par axe d et q de Park. De plus, seules des méthodes numériques permettent un calcul approché de ses grandeurs caractéristiques. Dans cet article nous proposons de déterminer les constantes de temps sous une forme analytique à partir de l'écriture de sous-systèmes réduits du premier ordre décrivant les régimes subtransitoire, transi...

  4. Solvent extraction method for determination of thorium in soft tissues

    International Nuclear Information System (INIS)

    Singh, N.P.; Ibrahim, S.A.; Cohen, N.; Wrenn, M.E.

    1979-01-01

    A simple, precise and accurate analytical technique has been developed for the determination of thorium isotopes in soft tissues. The method consists of preliminary nitric acid digestion of tissues after adding 229 Th tracer, followed by a mixture of nitric and sulfuric acid with occasional addition of hydrogen peroxide; thorium is then coprecipitated with iron carrier by ammonium hydroxide. The precipitate is washed until free of sulfate ions, dissolved in 1:1 HNO 3 and finally adjusted to 4 M HNO 3 . Thorium is extracted twice into 25% trilaurylamine (TLA) in xylene (pre-equilibrated with 4 M HNO 3 ) and backwashed twice with 10 M HCl. The aqueous phase is evaporated to almost dryness, treated with H 2 SO 4 with frequent addition of a few drops of HNO 3 , and electrodeposited onto a platinum planchet prior to α spectrometry with a surface-barrier silicon detector. The final total recovery ranged from 24 to 93% with a mean of 65% in 28 samples. Yield appeared to be independent of total iron when 10 to 100 mg Fe were added, and independent of total iron when 10 to 100 mg Fe were added, and independent of the amount of added tracer. The natural 228 Th content of three different beef liver samples was 1.3, 1.4, and 3.0 pCi/kg wet weight. 4 tables

  5. Recherche et utilisation de méthodes analytiques inverses pour des problèmes couplés thermo élastiques

    OpenAIRE

    Weisz-Patrault , Daniel

    2012-01-01

    This thesis is about the use of analytical mathematics within the framework of inverse methods applied to industry. These works are devoted to the development of sensors using real-time inverse methods adapted for rolling process. Steel producer ArcelorMittal leads a European project that aims to demonstrate the feasibility of sensors measuring fields (temperature, stress) in the contact between the product and the tool without altering physical conditions of this contact. The thesis has been...

  6. Extraction liquide-liquide des sels minéraux. Approximation analytique des isothermes de partage. Application au calcul sur ordinateur d'une installation Liquid-Liquid Extraction of Mineral Salts. Analytical Approximation of Partition Isotherms. Application to the Computer Designing of an Installation

    Directory of Open Access Journals (Sweden)

    Chaid M. T.

    2006-11-01

    Full Text Available Cet article comporte deux parties -dans la première on a calculé les isothermes de partage en partant des considérations thermodynamiques basées sur les travaux de Guggenheim. Les résultats ne sont bons que dans le cas des solutions idéales. On a donc simulé les isothermes par des fonctions analytiques. Celles-ci permettent de représenter convenablement tous les faisceaux d'isothermes quelles que soient l'acidité de la solution aqueuse et les concentrations dans les deux phases; - la deuxième partie est réservée au calcul d'une installation complète d'extraction avec colonne de récupération; le calcul, mené sur ordinateur, utilise les fonctions analytiques précédentes et permet d'obtenir les débits et les concentrations à chaque plateau. This article contains two parts: - the first part discusses the calculating of partition isotherms using thermodynamic considerations based on research by Guggenheim. The results are good only in the case of ideal solutions. Therefore, isotherms were simulated by ànalyticfunctionswhich are suitable for representing all isotherm bundles no matter what the acidity of the aqueous solution and the concentrations in both phases moy be. - the second part 'deals' with designing a complete extraction installation with a recovery column. Computerized designing makes use of the preceding analytic functions and enables flowrates and concentrations ta be determined at each plate.

  7. Analytical Solutions and Optimization of the Exo-Irreversible Schmidt Cycle with Imperfect Regeneration for the 3 Classical Types of Stirling Engine Solutions analytiques et optimisation du cycle de Schmidt irréversible à régénération imparfaite appliquées aux 3 types classiques de moteur Stirling

    Directory of Open Access Journals (Sweden)

    Rochelle P.

    2011-11-01

    Full Text Available The “old” Stirling engine is one of the most promising multi-heat source engines for the future. Simple and realistic basic models are useful to aid in optimizing a preliminary engine configuration. In addition to new proper analytical solutions for regeneration that dramatically reduce computing time, this study of the Schmidt-Stirling engine cycle is carried out from an engineer-friendly viewpoint introducing exo-irreversible heat transfers. The reference parameters are the technological or physical constraints: the maximum pressure, the maximum volume, the extreme wall temperatures and the overall thermal conductance, while the adjustable optimization variables are the volumetric compression ratio, the dead volume ratios, the volume phase-lag, the gas characteristics, the hot-to-cold conductance ratio and the regenerator efficiency. The new normalized analytical expressions for the operating characteristics of the engine: power, work, efficiency, mean pressure, maximum speed of revolution are derived, and some dimensionless and dimensional reference numbers are presented as well as power optimization examples with respect to non-dimensional speed, volume ratio and volume phase-lag angle.analytical solutions. Le “vieux” moteur Stirling est l’un des moteurs a sources multiples d’energie les plus prometteurs pour le futur. Des modeles elementaires simples et realistes sont utiles pour faciliter l’optimisation de configurations preliminaires du moteur. En plus de nouvelles solutions analytiques qui reduisent fortement le temps de calcul, cette etude du cycle moteur de Schmidt-Stirling modifie est entreprise avec le point de vue de l’ingenieur en introduisant les exo-irreversibilites dues aux transferts thermiques. Les parametres de reference sont des contraintes technologiques ou physiques : la pression maximum, le volume maximum, les temperatures de paroi extremes et la conductance totale, alors que les parametres d

  8. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  9. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  10. Analytical determination of 3-D global modes in Rayleigh-Benard-Poiseuille-type mixed convection flow; Determination analytique des modes globaux tridimensionnels en ecoulement de convection mixte du type Rayleigh-Benard-Poiseuille

    Energy Technology Data Exchange (ETDEWEB)

    Martinand, D.

    2003-01-15

    This analytical study deals with the spatio-temporal evolution of linear thermo-convective instabilities in a horizontal fluid layer heated from below (the Rayleigh--Benard system) and subject to a horizontal pressure gradient (Poiseuille flow). The novelty consists of a spatially inhomogeneous temperature, in the form of a two-dimensional bump imposed on the lower plate, while the upper plate is kept at a constant temperature. The inhomogeneous boundary temperature and the mean flow of the Rayleigh--Benard--Poiseuille system break the symmetries of the classical Rayleigh--Benard system. The instabilities of interest are therefore spatially localised packets of convection rolls. If a mode of this type is synchronized, it is called a global mode. Assuming that the characteristic scale of the spatial variation of the lower plate temperature is large compared to the wavelength of the rolls, global modes are sought in the form of Eigenmodes in the confined vertical direction, modulated by a two-dimensional WKBJ expansion in the slowly-varying horizontal directions. Such an expansion breaks down at points where the group velocity of the instability vanishes, i.e. at WKBJ turning points. In the neighbourhood of one such point, located at the top of the temperature bump, the boundedness of the solution imposes a selection criterion for the global modes which provides the growth rate (or equivalently the critical threshold), the frequency and the wave vector of the most amplified global mode. This study thus generalizes to two-dimensional cases the methods used and the results obtained for one-dimensional inhomogeneities. The analysis is first applied to a simplified governing equation obtained by an envelope formalism and the analytical results are compared with numerical solutions of the amplitude equation. The formalism is finally applied to the Rayleigh--Benard--Poiseuille system described by the Navier--Stokes equations with the Boussinesq approximation. (author)

  11. Etude Analytique de 510 Cas Biopies Ganglionnaires Chirurgicales

    Directory of Open Access Journals (Sweden)

    HAMID SABETI

    1975-06-01

    Full Text Available 510 cases of surgical lymph node biopsies during a five year periode are reviewed with the following conclusionsThe lymph node biopsy constitues 5% of all the surgical biopsies, The cervical and axillary lymph nodes are the most commonly biopsicd nodes due to their easy accessibility and due to the fact that they drain the lymph from many vital organs: the next most commonly biopsied nodes are the sub-clavicular, grains, mesentric and mediastinal nodes, Among all the lymph node affections the metastatic tumours occupy the first place (23 % followed by the primary tumours (malignant lymphomas 16% and the specific inflammatory lesions (10% , Among the metastic nodes squamous cell carcinoma occupy the first place (8% followed by digestivetract, lung, thyroid glands, breast, testicular, pancreatic, ovarian and gall bladder tumours.

  12. The Analytical Techniques Used for the Determination of Metallic Elements in Crude Oils and by-Products. A Review Les méthodes analytiques utilisées pour la détermination d'éléments métalliques dans les pétroles bruts et leurs dérivés. Synthèse bibliographique

    Directory of Open Access Journals (Sweden)

    Rodriguez A. R.

    2006-11-01

    Full Text Available A review is made of the most important analytical techniques for determining metals such as lead, iron, vanadium, nickel, copper, chromium, cobalt and sodium which are present in crude oils and by-products. Techniques such as neutron activation, atomic absorption spectrometry, X-ray fluorescence, molecular spectrophotometry and inductively coupled émission (ICP are discussed. Cet article est une synthèse bibliographique sur les méthodes analytiques les plus importantes utilisées pour la détermination d'éléments métalliques tels que le plomb, le fer, le vanadium, le nickel, le cuivre, le chrome, le cobalt et le sodium contenus dans les pétroles bruts et leur dérivés. On présente et on commente les méthodes d'activation neutronique, de spectrométrie d'absorption atomique, de fluorescence de rayons X, de spectrophotométrie moléculaire et de spectrométrie à émission de plasma inductif (ICP.

  13. Utilisation de l'echographie doppler couleur dans la localisation de l'insertion du cordon ombilical et le devenir materno-foetal à la maternité de l'hôpital central de Yaoundé : une étude descriptive et analytique

    Science.gov (United States)

    Fouedjio, Jeanne Hortence; Fouelifack, Florent Ymele; Deutcho, Maximilien; Njotang, Philip Nana; Enow, Robinson Mbu; Leke, Robert John Ivo

    2014-01-01

    Introduction L'échographie doppler couleur permet d'étudier l'insertion du cordon ombilical sur le placenta. Les études américaines et asiatiques montrent que les insertions anormales telles les insertions vélamenteuses et marginales sont associées à une élévation de la morbidité et de la mortalité périnatales. En Afrique et plus particulièrement au Cameroun, aucune étude n'a été publiée sur le sujet. D'où notre motivation à mener ce travail. Méthodes Il s'agissait d'une étude descriptive et analytique qui s'est déroulée sur une période deux ans (2011-2012) à la maternité principale de l'Hôpital Central de Yaoundé. Cette étude a inclus 66 patientes qui ont subi chacune une échographie doppler couleur entre la 18ième et 30ième semaine de gestation, précisant le type d'insertion du cordon ombilical sur le placenta. A l'accouchement, un examen macroscopique du placenta a été réalisé afin de comparer le type d'insertion et réaliser les tests statistiques. Résultats Des 66 grossesses étudiées, nous avons eu un pourcentage de visualisation du type d'insertion de 100%. Toutes les insertions étaient normales à l'échographie soit 20 centrales et 46 latérales. A l'examen macroscopique du placenta, nous avons obtenu 19 (28,8%) insertions centrales, 47(71,2%) insertions latérales ; aucune insertion anormale n'ayant été objectivée. Les tests statistiques nous permettent d'avoir une sensibilité de 95%, une spécificité de 97,8%, une exactitude de 98%, une valeur prédictive positive de 95% et une valeur prédictive négative de 97,8%. Pour ces insertions, nous n'avons pas retrouvé d'association entre le mode d'accouchement, le poids de naissance, et le Score d'apgar avec le type d'insertion du cordon ombilical. Conclusion Nous avons conclu que l'échographie doppler couleur a une haute sensibilité et spécificité dans la détermination de l'insertion du cordon ombilical sur le placenta. Il n'y a pas d'association entre le

  14. A Fully Analytical Solution of the Wellbore Stability Problem under Undrained Conditions Using a Linearised Cam-Clay Model Solution analytique au problème de stabilité de puits en conditions non drainées utilisant un modèle de Cam-Clay linéarisé

    Directory of Open Access Journals (Sweden)

    Charlez P. A.

    2006-12-01

    appliquée au problème du puits dans un champ de contrainte axisymétrique et en conditions non drainées. Compte tenu de la linéarité de la loi et de la connaissance a priori de la région plastique, la solution (contraintes, déformations et pression de pore est analytique. Les résultats montrent que pour un matériau surconsolidé (degré de consolidation inférieur à 2 la contrainte tangentielle est fortement relâchée dans la zone plastique. Plus la compressibilité du fluide est grande, plus cette relaxation est importante. En termes de stabilité, plus le fluide est compressible, plus le puits sera stable. Finalement, plus le degré de consolidation est grand, moins le puits sera stable.

  15. Partition chromatography separation using trilaurylamine adsorbed on a solid support. Behaviour of the uranyl ion; Separations par chromatographie de partage au moyen de trilaurylamine adsorbee sur support solide comportement de l'ion uranyle

    Energy Technology Data Exchange (ETDEWEB)

    Petit-Bromet, M. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    The extractive phase is made up of a TLA solution in cyclohexanol adsorbed on a solid poly-trifluorochloroethylene support (sold commercially as voltalef or KEL-F). The mixture obtained is homogeneous and can be used for partition chromatography. For a solution of hydrochloric acid stronger than 1 M, the amine is quantitatively in the form of the chlorohydrate. The partition curve for U(VI) between the 2 N hydrochloric acid aqueous phase and the organic TLA phase has two steps which can be explained by assuming that two complexes exist in the organic phase. The equilibrium constants for extraction have been determined. The homogeneity of the voltalef-amine mixture has made it possible to build up a column with reproducible characteristics. Under the operational conditions adopted, the height of the equivalent theoretical plate is about 3 mm. A plot of all the curves giving the variations in the partition function of U(VI), Fe(III), Cu(II), Sr(II) and Cs(I) as a function of the hydrochloric acid concentration makes it possible to predict the conditions under which these elements may be separated. [French] La phase extractive est constituee d'une solution de TLA dans le cyclohexanol adsorbe sur un support solide de polytrifluorochloroethylene (commercialise sous le nom de voltalef ou KEL-F). Le melange obtenu est homogene et peut etre utilise en chromatographie de partage. Pour une concentration d'acide chlorhydrique en solution superieure a 1 M, l'amine est quantitativement sous forme de chlorhydrate. La courbe de partage de U(VI) entre la phase aqueuse d'acide chlorhydrique 2 N et la phase organique de TLA presente deux paliers que l'on peut interpreter en admettant l'existence de deux complexes en phase organique. Les constantes des equilibres d'extraction ont ete determinees. L'homogeneite du melange voltalef-amine a permis de constituer une colonne.dont les caracteristiques sont reproductibles. Dans les conditions de fonctionnement adoptees, la hauteur de plateau theorique equivalent est de l'ordre de 3 mm. Le trace de l'ensemble des courbes donnant les variations des coefficients de partage de U(VI), Fe(III), Cu(II), Sr(II) et Cs(I) en fonction de la concentration d'acide chlorhydrique permet de prevoir les conditions de separation de ces elements. (auteur)

  16. Methodes de calcul des forces aerodynamiques pour les etudes des interactions aeroservoelastiques

    Science.gov (United States)

    Biskri, Djallel Eddine

    L'aeroservoelasticite est un domaine ou interagissent la structure flexible d'un avion, l'aerodynamique et la commande de vol. De son cote, la commande du vol considere l'avion comme une structure rigide et etudie l'influence du systeme de commande sur la dynamique de vol. Dans cette these, nous avons code trois nouvelles methodes d'approximation de forces aerodynamiques: Moindres carres corriges, Etat minimal corrige et Etats combines. Dans les deux premieres methodes, les erreurs d'approximation entre les forces aerodynamiques approximees par les methodes classiques et celles obtenues par les nouvelles methodes ont les memes formes analytiques que celles des forces aerodynamiques calculees par LS ou MS. Quant a la troisieme methode, celle-ci combine les formulations des forces approximees avec les methodes standards LS et MS. Les vitesses et frequences de battement et les temps d'executions calcules par les nouvelles methodes versus ceux calcules par les methodes classiques ont ete analyses.

  17. Analytical study, by modelling methods, of the alkali and alkaline earth cations influence on the stability and the reactivity of aluminium (III) oxides or halides complexes; Etude analytique, par des techniques de modelisation, de l`influence de cations alcalins ou alcalino-terreux sur la stabilite et la reactivite de complexes de l`aluminium(III) avec des ions halogenures ou oxydes

    Energy Technology Data Exchange (ETDEWEB)

    Bouyer, F.

    1995-10-05

    The electric power consumption in aluminium production and electrorefining processes is high. A study of the electrochemical processes can be very useful for a better understanding of phenomena in electrolytic baths and then for reducing the production costs. A structural and vibrational analysis of species which exist in ionic solutions has been carried out with software based on the functional density theory. Concerning the electrolyte used for the aluminium refining, the anions study has shown that the aluminium chloro-fluoride complexes are preferentially tetrahedral. Moreover, the aluminium oxyfluoride complexes structures (which come from the alumina dissolution in cryolitic media) have been analyzed in the same way and the preferential coordination numbers for aluminium and oxygen have been shown clearly. The anionic model (which is limited to the nearest aluminium neighbours) does not allow to account for the thermodynamics of the cryolitic media. A more elaborated model has then been found to obtain the cryolite structure. The reactions enthalpies have been estimated and have lead to the calculus of species concentration gradients in liquid phase. The counterions effects as for instance sodium and calcium have been investigated. A model for the gaseous phase allowing to know the preferential species has been given. At last, a statistic thermochemistry program has been conceived and developed. It gives the thermodynamical functions at all temperature for the different complexes and allows to reckon the reactions coefficients in gaseous phase as well as the partial pressures profiles with those of calcium and sodium fluorides. (O.M.) 204 refs.

  18. Structures des fractions lourdes. Méthodes d'analyse et préparation des charges Structures of Heavy Fractions. Feedstock Analysis and Preparation Methods

    Directory of Open Access Journals (Sweden)

    Vercier P.

    2006-11-01

    Full Text Available Après avoir défini les termes fractions lourdes et pétroles bruts lourds, et avoir souligné l'intérêt économique qu'il y a à utiliser ces matériaux, on passera en revue les techniques analytiques disponibles pour aborder les difficiles problèmes technologiques que soulève l'emploi des équipements et des méthodes conventionnels. On montrera que les analystes auront besoin de techniques améliorées ou même entièrement nouvelles pour séparer ces produits en des fractions plus simples, susceptibles d'être alors analysées par les méthodes plus traditionnelles : distillation à haute température (jusqu'à 650 °C ; séparation en asphaltènes, résines et huile ; séparation en acides, bases, neutres, saturés, mono-, di-, poly-aromatiques ; analyses structurales (analyses élémentaires, détermination des masses moléculaires, spectrométrie de masse, RMN, pyrolyse et détection à l'aide de détecteurs spécifiques pour le soufre et l'azote. Comme le facteur temps est important dans les études pilote, il sera montré que la mise au point des méthodes rapides et modernes de chromatographie liquide sera l'objectif prioritaire de la recherche analytique dans le futur proche. After defining the terms heavy fractionsand heavy crudesand then stressing the economic interest there is in using such materials, a survey is made of the analytical techniques available for tackling the difficult technological problems arising from the use of conventional equipment and methods. It is shown that analysts will need improved or even completely new techniques for separating such products into simpler fractions so that they can be analyzed by more traditional methods, i. e. high-temperature distillation (up to 650°C; separation into asphaltenes, resins and oils; structural analyses (elemental analyses, determining molecular weights, mass spectrometry, NMR, pyrolysis and detection with specific sulfur and nitrogen detectors. Since the time

  19. Construction de séquences de solutions analytiques exactes pour la diffusion de la chaleur dans les matériaux hétérogènes à gradient par des transformations de Darboux. Exemples pour des milieux semi-infinis.

    OpenAIRE

    Krapez, Jean-Claude

    2016-01-01

    International audience; The Darboux transformation is a differential transformation which, like other related methods (supersymmetry quantum mechanics-SUSYQM, factorization method) allows generating sequences of solvable potentials for the stationary 1D Schrödinger equation. It was recently shown that the heat equation in graded heterogeneous media, after a Liouville transformation, reduces to a pair of Schrödinger equations sharing the same potential function, one for the transformed tempera...

  20. Phenomenological and analytical interpretation of the rain-deposit relationship used for the reconstitution of the cesium 137 deposit in France consecutive to the accident of Chernobylsk; Interpretation phenomenologique et analytique de la relation pluie-depot utilisee pour la reconstitution des depots de {sup 137}Cs en France consecutifs a l'accident de Tchernobyl

    Energy Technology Data Exchange (ETDEWEB)

    Champion, D.; Renaud, Ph.; Metivier, J.M.; Garcia-Sanchez, L.; Pourcelot, L. [Institut de Radioprotection et de Surete Nucleaire, Dir. de l' environnement et de l' intervention 92 - Fontenay-aux-Roses (France)

    2005-11-15

    The works presented in this report allow to give two conclusions: the first one bears on the reconstitution of the cesium 137 deposits induced by the Chernobylsk accident; the second one bears on the methods improvement of post accident consequences evaluation induced by the radioactive atmosphere fallout. (N.C.)

  1. Direct evaluation of thyroid [sup 127]I and iodine overload: in vivo study by X-ray fluorescence and in vitro by SIMS microscopy. Evaluation directe de l'[sup 127]I thyroidien en situation de surcharge iodee: etude in vivo par fluorescence X et in vitro par microscopie ionique analytique

    Energy Technology Data Exchange (ETDEWEB)

    Briancon, C.; Jeusset, J.; Halpern, S.; Fragu, P. (Centre de Lutte Contre le Cancer Gustave-Roussy, 94 - Villejuif (France))

    1992-01-01

    This review describes the two methods which allow direct estimation of stable iodine ([sup 127] I) within thyroid gland either in vivo by X-ray fluorescence or in vitro by secondary ion mass spectrometry (SIMS) microscopy on tissue section. Although the measurement of thyroid iodine content (TIC) by X-ray fluorescence has little relevance for routine explorations of thyroid function, this is a valuable method for understanding complex pathophysiological conditions such as the thyroid adaptation to iodine overload. On the other hand, SIMS microscopy which is able to characterize the functional activity of thyroid tissue by measuring [sup 127] I concentration within the thyroid follicles, can be used to determine the extent to which exogeneous iodine affects the regulation of iodine within the thyroid follicles. Both methods were used to evaluate the quantitative changes in thyroid [sup 127] I induced by amiodarone iodine overload. TIC measurements shows that hyperthyroidism occured only in patients who increased their iodine stores, while the patients who developed hypothyroidism has low iodine stores. The SIMS microscopy data obtained in mice demonstrated that the thyroid response to amiodarone is related to dietary iodine intake leading to an increase in local iodine concentration in iodine deficient mice and to a decrease in iodine supplemented mice. This response is specific and different from that induced by an iodine overload. These results could explain that hyperthyroidism with high thyroid iodine content occured in areas with low thyroid iodine content in areas with a supplemented iodine diet.

  2. Analytic index for nuclear physicians uses; Repertoire analytique a l'usage des physiciens nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Ballini, R.; Barloutaud, R.; Bernas, R.; Bretonneau, P.; Chaminade, R.; Cohen, R.; Conjeaud, M.; Cotton, E.; Faraggi, H.; Grjebine, T.; Joffre, H.; Laboulaye, H. de; Lesueur, C.; Leveque, A.; Moreau, J.; Naggiar, V.; Papineau, L.; Prugne, P.; Schuhl, C.; Studinowski, FJ.; Netter, F.; Raievski, V.; Valladas, G. [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires; Marty, N.; Renard, G. [College de France, Lab. de Chimie Nucleaire (France)

    The problem of the documentation in nuclear physics becomes constantly more complex. Every week brings its share of new publications, always more numerous and more varied. To remedy to this facts that we tried, in the service of Nuclear Physics of the CEA, to give to the documentation a character of a collective and systematized work. The present report covers the literature appeared between first January 1950 and first July 1951. (Volume 1: CEA report number 120; Volume 2: CEA report number 184). (M.B.) [French] Le probleme de la documentation en physique nucleaire devient sans cesse plus complexe. Chaque semaine apporte son lot de publications, toujours plus nombreuses et plus diversifiees. C'est pour essayer de porter remede a cet etat de choses que nous avons essaye, au service de Physique Nucleaire du C.E.A., de donner a la documentation le caractere d'un travail collectif systematise. Le present rapport couvre la litterature parue entre le premier Janvier 1950 et le premier Juillet 1951. (Tome 1: Rapport CEA numero 120; Tome 2: Rapport CEA numero 184). (M.B.)

  3. Analyse expérimentale et analytique du comportement en flexion ...

    African Journals Online (AJOL)

    sihem

    s'agit de la technique de renforcement par collage extérieur in situ de composite de type textile polymère. La technique s'avère intéressante grâce au rapport très élevé de poids-résistance des matériaux composites et de leur résistance à la corrosion et constitue ainsi par sa facilité des conditions de mise en œuvre.

  4. Soutien analytique pour les pays d'Afrique et des Caraïbes en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    accroître l'efficacité de la participation des pays d'Afrique et des Caraïbes au programme de travail du cycle de Doha pour le développement de l'Organisation mondiale du commerce (OMC), ainsi qu'à l'intégration régionale et aux négociations ...

  5. Applications analytiques des films minces de mercure protégés par ...

    African Journals Online (AJOL)

    Analytical application of fibrinogen-coated mercury film electrodes for the detection of lead and cadmium in water samples. The aim of this study was the development of sensor based on fibrinogen (Fbg) coated mercury film electrodes at carbon paste electrode in the perspective of in-field stripping analysis of heavy metals ...

  6. Analytic determination of plutonium in the environment; Determination analytique du plutonium dans l'environnement

    Energy Technology Data Exchange (ETDEWEB)

    Ballada, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The work described in this report was undertaken with a view to determining the plutonium content in the fall-out from nuclear explosions. In the first part are described in turn the importance of the problems due to the plutonium, the physico-chemical properties of the radioelement and the biological dangers which it presents. A detailed and critical analysis is made of the radio-toxicological determination of the plutonium as reported in the literature prior to this report. The second part consists in the presentation of a judicious choice of techniques making it possible to determine plutonium in air, rain-water, soils and ash. After a detailed description of the measurement equipment and the operational techniques which have been developed, a justification of these techniques is given with particular reference to their sensitivity and specificity. After a brief conclusion concerning the preceding chapters, the results are presented. These are then discussed in the ease of each element in which the plutonium has been determined. This discussion is concluded by a consideration of the importance of the occurrence of fall-out plutonium on problems relating to public health. From a consideration of 200 analyses carried out, it is concluded that the contribution of plutonium to the exposure of populations is still very small compared to that of natural radiation and that due to such fission products as strontium 90. The report includes 63 literature references, 26 figures and 11 tables. (author) [French] Les travaux decrits dans ce memoire ont ete entrepris et eflectues dans le but de mettre en evidence le plutonium des retombees radioactives consecutives aux explosions nucleaires. Dans la premiere partie nous etudions successivement l'importance des problemes poses par le plutonium puis les proprietes physicochimiques du radioelement et les dangers qu'il presente du point de vue biologique. Nous effectuons une analyse detaillee et critique des techniques radiotoxicologiques de dosage du plutonium, dont les pubications sont anterieures au debut des travaux de ce memoire. La seconde partie consiste en un choix motive de techniques nous permettant de doser le plutonium dans l'air, l'eau de pluie, les sols et les cendres vegetaux. Apres une description detaillee des appareils de mesure et des modes operatoires que nous avons mis au point, nous justifions nos techniques et discutons en particulier de leur sensibilite et de leur specificite. Faisant suite a une breve conclusion concernant les chapitres precedents, nous donnons les resultats obtenus. Ceux-ci sont ensuite discutes pour chaque element o nous avons dose le plutonium. Cette discussion s'acheve en examinant l'incidence du plutonium des retombees sur les problemes relatifs a l'hygiene publique. Nous basant sur environ 200 analyses effectuees, nous pouvons conclure que la contribution du plutonium a l'irradiation des populations reste faible, comparee a l'irradiation naturelle et a l'irradiation due aux produits de fission tel le strontium 90. Le memoire comprend 63 references bibliographiques, 26 figures et 11 tableaux. (auteur)

  7. Soutien analytique pour les pays d'Afrique et des Caraïbes en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Foreign Direct Investment Behaviour in Low and Middle Income Countries. This project will examine the impact of foreign direct investment (FDI) on economic efficiency, poverty and inequality in low- and middle-income countries. View moreForeign Direct Investment Behaviour in Low and Middle Income Countries ...

  8. Extraction and purification of plutonium by a tertiary amine

    International Nuclear Information System (INIS)

    Trentinian, M. de; Chesne, A.; Commissariat a l'Energie Atomique, Saclay

    1960-01-01

    Trilaurylamine diluted with a paraffinic solvent (dodecane) was studied as part of the research dealing with the separation and purification of plutonium. The physical properties (solubility of nitrates in the amine as a function of temperature) and the resistance to radiations of this substance were examined. The extraction characteristics of nitric solutions of plutonium, uranium and certain fission products are given as a function of the following factors: concentration of the various ions in solution, valency states. A method of plutonium purification based on these results is presented. (author) [fr

  9. Validation of an analytical method for analysis of cannabinoids in hair by headspace solid-phase microextraction and gas chromatography-ion trap tandem mass spectrometry.

    Science.gov (United States)

    Emídio, Elissandro Soares; Prata, Vanessa de Menezes; Dórea, Haroldo Silveira

    2010-06-18

    The development of an analytical method for the determination of Delta(9)-tetrahydrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN) in samples of human hair is described. Samples were subjected to a procedure based on the combination of headspace solid-phase microextraction (HS-SPME) with gas chromatography linked with mass spectrometry operating in tandem mode (GC-MS/MS). A 10 mg aliquot of sample was firstly decontaminated using petroleum ether, deionized water and dichloromethane (2 mL of each solvent), for 10 min under sonication, and then digested in alkaline solution (1 mol L(-1) NaOH). The method variables evaluated were pH, mass of hair, fiber type, extraction temperature, desorption time, ionic strength, pre-equilibrium time and extraction time. Parameters concerning operation of the tandem mode MS/MS were also assessed and optimized. Validation of the method demonstrated excellent linearity in the range 0.1-8.0 ng mg(-1), with regression coefficients better than 0.994. Precision was determined using two different concentrations (upper and lower limits of the linear range), and RSD values were between 6.6 and 16.4%. Absolute recoveries (measured in triplicate) were in the range 1.1-8.7%, and limits of detection and quantification were 0.007-0.031 ng mg(-1) and 0.012-0.062 ng mg(-1), respectively. The LOQ for THC (0.062 ng mg(-1)) was below the cut-off value (LOQ Toxicologie Analytique (SFTA). The optimized SPME method was applied in analysis of hair samples from Cannabis drug users, showing that CBN and CBD were present in all samples analyzed. 2010 Elsevier B.V. All rights reserved.

  10. Applications de la résonance magnétique nucléaire (RMN en milieu poreux Lissage des courbes de relaxation RMN du domaine du temps par une méthode discrète et continue Nuclear Magnetic Resonance (Nmr Applications in Porous Media Time-Dependent Nmr Relaxation Curve Smoothing Using a Discrete Continuous Method

    Directory of Open Access Journals (Sweden)

    Le Botlan D.

    2006-12-01

    Full Text Available Dans un champ magnétique hétérogène, le signal RMN de précession libre (FID suit une évolution gaussienne. Le traitement du signal par une méthode discrète peut donner des composantes qui ne correspondent pas à un état physique réel. Par contre l'utilisation d'une méthode de déconvolution continue nous a donné des résultats quantitatifs tout à fait satisfaisants permettant de déterminer les distributions de temps de relaxation correspondant à des états intermédiaires entre les phases solides et liquides. La RMN du domaine du temps peut ainsi être considérée comme une méthode analytique complémentaire des techniques habituellement utilisées pour l'étude de composés complexes hétérogènes ATD, ACD, isothermes de sorption, etc. In a heterogeneous magnetic field, the freely precessing NMR signal (FID describes a Gaussian curve. Processing the signal using a discrete method can give rise to components that do not correspond to a real physical state. However, with a continuous deconvolution method, which gives quite satisfactory quantitative results, it is possible to determine the distributions of relaxation times that correspond to intermediate states between solid and liquid phases. Time-dependent NMR can thus be used to supplement the usual analytical methods, such as DTA, DCA and sorption isotherms, for studying complex heterogeneous compounds.

  11. Les pertes après récolte en Afrique : examen analytique et synthèse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC Officer. Sanginga, Pascal. Total funding. CA$ 350,000. Country(s). North of Sahara, South of Sahara, Benin, Ghana, Kenya, Malawi, Mozambique, Tanzania. Project Leader. Dr. Hippolyte Affognon. Institution. International Centre of Insect Physiology and Ecology. Institution Country. Kenya. Institution Website.

  12. Analytic catalog for the use of the nuclear physicists; Repertoire analytique a l'usage des physiciens nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Ballini, R.; Barloutaud, R.; Bernas, R.; Chaminade, R.; Cohen, R.; Conjeaud, M.; Cotton, E.; Faraggi, H.; Grjebine, T.; Laboulaye, H. de; Lehmann, P.; Leveque, A.; Levi, C.; Moreau, J.; Naggiar, V.; Olkowsky, J.; Papineau, L.; Papineau, L.; Prugne, P.; Schuhl, C.; Szteinsznaider, D.; Tzara, C.; Valladas, G. [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires; Marty, N.; Renard, G. [College de France, Lab. de Chimie Nucleaire (France)

    1952-07-01

    The problem of the documentation in nuclear physics becomes constantly more complex. Every week brings its share of publications, always more numerous and more varied. To remedy to this problem, we tried, at the Nuclear Physics Services of the CEA, to give to the documentation the character of a collective and systematized work. The present report covers the literature appeared between January 1, 1950 and July 1, 1951. (Volume 1: CEA report number 120; Volume 2: CEA report number 184). (M.B.) [French] Le probleme de la documentation en physique nucleaire devient sans cesse plus complexe. Chaque semaine apporte son lot de publications, toujours plus nombreuses et plus diversifiees. C'est pour essayer de porter remede a cet etat de choses que nous avons essaye, au service de Physique Nucleaire du C.E.A., de donner a la documentation le caractere d'un travail collectif systematise. Le present rapport couvre la litterature parue entre le 1 Janvier 1950 et le 1 Juillet 1951. (Tome 1: Rapport CEA numero 120; Tome 2: Rapport CEA numero 184). (M.B.)

  13. Les pertes après récolte en Afrique : examen analytique et synthèse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Partout en Afrique, les pertes après récolte le long de la chaîne alimentaire, de la ferme à la table, mettent en péril la sécurité alimentaire des agriculteurs dépourvus de ressources. La réduction des pertes après récolte peut aider à accroître la disponibilité, la qualité nutritionnelle et la salubrité des aliments, et à améliorer ...

  14. ETUDES ANALYTIQUES : Détection des OGM : du libre choix des consommateurs aux études de biovigilance

    Directory of Open Access Journals (Sweden)

    Bertheau Yves

    2000-07-01

    Full Text Available Les récentes affaires de semences conventionnelles de colza et de maïs contaminées par des traces d’OGM ont à nouveau, s’il en était besoin, rappelé à notre bon souvenir les besoins en méthodes de détection et d’identification des OGM fiables et sensibles. Les développements se poursuivent, certes bien plus lentement qu’initialement espéré du fait du nombre important de facteurs à maîtriser et du caractère relativement inédit de ce travail. Concernant des matrices alimentaires variées, cette détection se heurte au manque de recul dans plusieurs domaines tels que celui de l’extraction et la purification d’acides nucléiques en quantité et en qualité. Bien que développées pour satisfaire aux besoins réglementaires européens concernant l’alimentation humaine, ces méthodes devraient être aisément applicables dans d’autres domaines concernés par les OGM (étude des transferts de gènes par flux pollinique, éventuels transferts horizontaux, suivi des acides nucléiques lors de l’ingestion.... Au-delà des OGM, les méthodes mises en œuvre devraient présenter un intérêt dans d’autres domaines comme la microbiologie, l’épidémiologie ou l’authentification des composants biologiques d’un produit.

  15. Etude analytique de la flore et de la végétation du Parc National de ...

    African Journals Online (AJOL)

    aide de la méthode phytosociologique classique. ... Cinq groupements sont nouveaux: un groupement en savanes (savanes à Hyparrhenia diplandra et Entada abyssinica), deux groupements dans les galeries forestières (galeries forestières ...

  16. Les pertes après récolte en Afrique : examen analytique et synthèse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Partout en Afrique, les pertes après récolte le long de la chaîne alimentaire, de la ferme à la table, mettent en péril la sécurité alimentaire des agriculteurs dépourvus de ressources ... L'Initiative des conseils subventionnaires de la recherche scientifique en Afrique subsaharienne remporte le prix de la diplomatie scientifique.

  17. Perturbation methods

    CERN Document Server

    Nayfeh, Ali H

    2008-01-01

    1. Introduction 1 2. Straightforward Expansions and Sources of Nonuniformity 23 3. The Method of Strained Coordinates 56 4. The Methods of Matched and Composite Asymptotic Expansions 110 5. Variation of Parameters and Methods of Averaging 159 6. The Method of Multiple Scales 228 7. Asymptotic Solutions of Linear Equations 308 References and Author Index 387 Subject Index 417

  18. Maintenance methods

    International Nuclear Information System (INIS)

    Sanchis, H.; Aucher, P.

    1990-01-01

    The maintenance method applied at the Hague is summarized. The method was developed in order to solve problems relating to: the different specialist fields, the need for homogeneity in the maintenance work, the equipment diversity, the increase of the materials used at the Hague's new facilities. The aim of the method is to create a knowhow formalism, to facilitate maintenance, to ensure the running of the operations and to improve the estimation of the maintenance cost. One of the method's difficulties is the demonstration of the profitability of the maintenance operations [fr

  19. Method 59

    DEFF Research Database (Denmark)

    Kjellsson, G.

    1994-01-01

    OCDE/GD(94)41. Er supplerende rapport til rapport: The OECD Workshop on Methods for Monitoring Organisms in the Environment, Ottawa 14-17 September 1992. Environment Monograph 90.......OCDE/GD(94)41. Er supplerende rapport til rapport: The OECD Workshop on Methods for Monitoring Organisms in the Environment, Ottawa 14-17 September 1992. Environment Monograph 90....

  20. Seismic Methods

    Science.gov (United States)

    Seismic methods are the most commonly conducted geophysical surveys for engineering investigations. Seismic refraction provides engineers and geologists with the most basic of geologic data via simple procedures with common equipment.

  1. Method Mixins

    DEFF Research Database (Denmark)

    Ernst, Erik

    2005-01-01

    The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior......, where traditional invocation is optimized for as-is reuse of existing behavior. Tight coupling reduces flexibility, and traditional invocation tightly couples transfer of information and transfer of control. Method mixins decouple these two kinds of transfer, thereby opening the doors for new kinds...... of abstraction and reuse. Method mixins use shared name spaces to transfer information between caller and callee, as opposed to traditional invocation which uses parameters and returned results. This relieves the caller from dependencies on the callee, and it allows direct transfer of information further down...

  2. Method Mixins

    DEFF Research Database (Denmark)

    Ernst, Erik

    2002-01-01

    invocation is optimized for as-is reuse of existing behavior. Tight coupling reduces flexibility, and traditional invocation tightly couples transfer of information and transfer of control. Method mixins decouple these two kinds of transfer, thereby opening the doors for new kinds of abstraction and reuse......The procedure call mechanism has conquered the world of programming, with object-oriented method invocation being a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, where traditional....... Method mixins use shared name spaces to transfer information between caller and callee, as opposed to traditional invocation which uses parameters and returned results. This relieves a caller from dependencies on the callee, and it allows direct transfer of information further down the call stack, e...

  3. Method Mixins

    DEFF Research Database (Denmark)

    Ernst, Erik

    2005-01-01

    The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, ...... the call stack, e.g., to a callee's callee. The mechanism has been implemented in the programming language gbeta. Variants of the mechanism could be added to almost any imperative programming language.......The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior...

  4. Dosimetry methods

    DEFF Research Database (Denmark)

    McLaughlin, W.L.; Miller, A.; Kovacs, A.

    2003-01-01

    Chemical and physical radiation dosimetry methods, used for the measurement of absorbed dose mainly during the practical use of ionizing radiation, are discussed with respect to their characteristics and fields of application.......Chemical and physical radiation dosimetry methods, used for the measurement of absorbed dose mainly during the practical use of ionizing radiation, are discussed with respect to their characteristics and fields of application....

  5. Ensemble Methods

    Science.gov (United States)

    Re, Matteo; Valentini, Giorgio

    2012-03-01

    Ensemble methods are statistical and computational learning procedures reminiscent of the human social learning behavior of seeking several opinions before making any crucial decision. The idea of combining the opinions of different "experts" to obtain an overall “ensemble” decision is rooted in our culture at least from the classical age of ancient Greece, and it has been formalized during the Enlightenment with the Condorcet Jury Theorem[45]), which proved that the judgment of a committee is superior to those of individuals, provided the individuals have reasonable competence. Ensembles are sets of learning machines that combine in some way their decisions, or their learning algorithms, or different views of data, or other specific characteristics to obtain more reliable and more accurate predictions in supervised and unsupervised learning problems [48,116]. A simple example is represented by the majority vote ensemble, by which the decisions of different learning machines are combined, and the class that receives the majority of “votes” (i.e., the class predicted by the majority of the learning machines) is the class predicted by the overall ensemble [158]. In the literature, a plethora of terms other than ensembles has been used, such as fusion, combination, aggregation, and committee, to indicate sets of learning machines that work together to solve a machine learning problem [19,40,56,66,99,108,123], but in this chapter we maintain the term ensemble in its widest meaning, in order to include the whole range of combination methods. Nowadays, ensemble methods represent one of the main current research lines in machine learning [48,116], and the interest of the research community on ensemble methods is witnessed by conferences and workshops specifically devoted to ensembles, first of all the multiple classifier systems (MCS) conference organized by Roli, Kittler, Windeatt, and other researchers of this area [14,62,85,149,173]. Several theories have been

  6. Surface integral formulation of Maxwell's equations for simulation of non-destructive testing by eddy currents. Preliminary study on the implementation of the fast multipole method; Formulation integrale surfacique des equations de Maxwell pour la simulation de controles non destructifs par courant de Foucault. Etude preliminaire a la mise en oeuvre de la methode multipole rapide.

    Energy Technology Data Exchange (ETDEWEB)

    Lim, T.

    2011-04-28

    numeriquement un controle non destructif par courants de Foucault (CND-CF), la reponse du capteur peut etre modelisee via une approche semi-analytique par integrales de volume. Plus rapide que la methode des elements finis, cette approche est cependant limitee a l'etude de pieces planes ou cylindriques (sans prise en compte des effets de bords) du fait de la complexite de l'expression de la dyade de Green pour des configurations plus generales. Or, il existe une forte demande industrielle pour etendre les capacites de la modelisation CF a des configurations complexes (plaques deformees, bords de piece...). Nous avons donc ete amenes a formuler differemment le probleme electromagnetique, en nous fixant comme objectif de conserver une approche semi-analytique. La formulation integrale surfacique (SIE) permet d'exprimer le probleme volumique en un probleme de transmission equivalent a l'interface (2D) entre sous-domaines homogenes. Ce probleme est ramene a la resolution d'un systeme lineaire (par la methode des moments) dont le nombre d'inconnues est reduit du fait du caractere surfacique du maillage. Des lors, ce systeme peut etre resolu par un solveur direct pour de petites configurations. Cela nous a permis de traiter plusieurs seconds membres (ie. differentes positions de capteurs) pour une seule inversion de la matrice d'impedance. Les resultats numeriques obtenus au moyen de cette formulation concernent des plaques avec la prise en compte des effets de bords tels que l'arete et le coin. Ils sont en accord avec des resultats obtenus par la methode des elements finis. Pour des configurations de grandes tailles, nous avons mene une etude preliminaire a l'adaptation d'une methode d'acceleration du produit matrice-vecteur intervenant dans un solveur iteratif (methode multipole rapide, ou FMM) afin de definir les conditions dans lesquelles le calcul FMM fonctionne correctement (precision, convergence...) dans le contexte CND

  7. Sieve methods

    CERN Document Server

    Halberstam, Heine

    2011-01-01

    Derived from the techniques of analytic number theory, sieve theory employs methods from mathematical analysis to solve number-theoretical problems. This text by a noted pair of experts is regarded as the definitive work on the subject. It formulates the general sieve problem, explores the theoretical background, and illustrates significant applications.""For years to come, Sieve Methods will be vital to those seeking to work in the subject, and also to those seeking to make applications,"" noted prominent mathematician Hugh Montgomery in his review of this volume for the Bulletin of the Ameri

  8. Statistical methods

    CERN Document Server

    Szulc, Stefan

    1965-01-01

    Statistical Methods provides a discussion of the principles of the organization and technique of research, with emphasis on its application to the problems in social statistics. This book discusses branch statistics, which aims to develop practical ways of collecting and processing numerical data and to adapt general statistical methods to the objectives in a given field.Organized into five parts encompassing 22 chapters, this book begins with an overview of how to organize the collection of such information on individual units, primarily as accomplished by government agencies. This text then

  9. Projection Methods

    DEFF Research Database (Denmark)

    Wagner, Falko Jens; Poulsen, Mikael Zebbelin

    1999-01-01

    When trying to solve a DAE problem of high index with more traditional methods, it often causes instability in some of the variables, and finally leads to breakdown of convergence and integration of the solution. This is nicely shown in [ESF98, p. 152 ff.].This chapter will introduce projection...

  10. Characterization methods

    Energy Technology Data Exchange (ETDEWEB)

    Glass, J.T. [North Carolina State Univ., Raleigh (United States)

    1993-01-01

    Methods discussed in this compilation of notes and diagrams are Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and other surface analysis techniques (auger electron spectroscopy, x-ray photoelectron spectroscopy, electron energy loss spectroscopy, and scanning tunnelling microscopy). A comparative evaluation of different techniques is performed. In-vacuo and in-situ analyses are described.

  11. Digital Methods

    NARCIS (Netherlands)

    Rogers, R.

    2013-01-01

    In Digital Methods, Richard Rogers proposes a methodological outlook for social and cultural scholarly research on the Web that seeks to move Internet research beyond the study of online culture. It is not a toolkit for Internet research, or operating instructions for a software package; it deals

  12. expansion method

    Indian Academy of Sciences (India)

    ... (G /G)-expansion method, here in the present work, we investigate five nonlinear equations of physical importance, namely the (2+1)-dimensional Maccari system, the Pochhammer–Chree equation, the Newell–. Whitehead equation, the Fitzhugh–Nagumo equation and the Burger–Fisher equation. The organization of the ...

  13. expansion method

    Indian Academy of Sciences (India)

    of a system under investigation is to model the system in terms of some mathematical equations, which are generally nonlinear, and then find exact analytic solutions of such model equations using a suitable method. By the aid of exact solutions, when they exist, the phenomena modelled by these NLEEs can be better ...

  14. An Analytical Autoethnographical Account of using Inquiry-Based Learning in a Graduate Research Methods Course

    Directory of Open Access Journals (Sweden)

    Jules Woolf

    2017-03-01

    Full Text Available Increased emphasis is being placed on integrating research and teaching in higher education because of the numerous benefits accrued by students. In accordance, research methods courses are ubiquitously contained in curricula, ostensibly to promote research training and the research-teaching nexus. Students may not appreciate the inclusion, however, of such courses or emphasis on research training when their career ambitions are outside academia. In this analytical autoethnographic study, I examined my experience of teaching research methods to twenty graduate students using an inquiry-based learning strategy. To assist my analysis, I incorporated the students’ reflective journals of their experience of the course. Inquiry based learning motivated both the students and me, however the approach was time intensive and stressful for me. Contrary to current recommendations, guidance is of crucial importance with this teaching approach, particularly at the onset. Furthermore, an alignment between my own research interests and course content was not necessary for the research-teaching nexus to be experienced. Moreover, absence of such alignment provided opportunities for personal development both for the students and in my case, the instructor. Dans l’enseignement supérieur, on met maintenant de plus en plus d’emphase sur l’intégration de la recherche dans l’enseignement à cause des nombreux avantages dont peuvent bénéficier les étudiants. Par conséquent, les cours de méthodologie de la recherche font désormais partie des programmes de cours de façon ubiquitaire, visiblement pour favoriser la formation en recherche et le lien entre l’enseignement et la recherche. Toutefois, les étudiants n’apprécient pas toujours une telle inclusion de ces cours ni l’accent mis sur la formation en recherche lorsque leurs ambitions de carrière se situent hors du milieu universitaire. Dans cette étude analytique auto-ethnographique, j

  15. Numerical methods

    CERN Document Server

    Dahlquist, Germund

    1974-01-01

    ""Substantial, detailed and rigorous . . . readers for whom the book is intended are admirably served."" - MathSciNet (Mathematical Reviews on the Web), American Mathematical Society.Practical text strikes fine balance between students' requirements for theoretical treatment and needs of practitioners, with best methods for large- and small-scale computing. Prerequisites are minimal (calculus, linear algebra, and preferably some acquaintance with computer programming). Text includes many worked examples, problems, and an extensive bibliography.

  16. Radiofluorination method

    DEFF Research Database (Denmark)

    2014-01-01

    A method of conducting radiofluorination of a substrate, comprising the steps of: (a) contacting an aqueous solution of [18F] fluoride with a polymer supported phosphazene base for sufficient time for trapping of [18F] fluoride on the polymer supported phosphazene base; and (b) contacting...... a solution of the substrate with the polymer supported phosphazene base having [18F] fluoride trapped thereon obtained in step (a) for sufficient time for a radiofluorination reaction to take place; an apparatus for conducting radiofluorination; use of the apparatus; and an apparatus for production of a dose...

  17. Element Method

    Directory of Open Access Journals (Sweden)

    Fong Kah Soon

    2017-01-01

    Full Text Available The vibration of damped pipeline conveying fluid with the effect of fluid-structure interaction is known to pose challenging problems in oil and gas industry. In this study, the natural frequency of fluid-structure interaction in pipeline conveying fluid set on viscoelastic foundation is investigated by using finite element method. The governing partial differential equation is modelled based on Euler-Bernoulli beam theory. By applying Galerkin weighted residual method, the stiffness, damping, and mass matrices are obtained. For a given boundary condition which is simply supported, two components of the foundation (foundation stiffness and damping which are influencing the damped natural frequency of the pipeline are studied for different fluid velocity. The results indicate that increasing the foundation stiffness from 10 kN/m3 to 30 kN/m3 increases the natural frequency of the pipeline, while increasing the foundation damping from 1 kN.s/m3 to 3 kN.s/m3 and fluid velocity decrease the natural frequency of the pipeline. The accuracy of the results obtained is validated against data from literature.

  18. WELDING METHOD

    Science.gov (United States)

    Cornell, A.A.; Dunbar, J.V.; Ruffner, J.H.

    1959-09-29

    A semi-automatic method is described for the weld joining of pipes and fittings which utilizes the inert gasshielded consumable electrode electric arc welding technique, comprising laying down the root pass at a first peripheral velocity and thereafter laying down the filler passes over the root pass necessary to complete the weld by revolving the pipes and fittings at a second peripheral velocity different from the first peripheral velocity, maintaining the welding head in a fixed position as to the specific direction of revolution, while the longitudinal axis of the welding head is disposed angularly in the direction of revolution at amounts between twenty minutas and about four degrees from the first position.

  19. Moment methods and Lanczos methods

    International Nuclear Information System (INIS)

    Whitehead, R.R.

    1980-01-01

    In contrast to many of the speakers at this conference I am less interested in average properties of nuclei than in detailed spectroscopy. I will try to show, however, that the two are very closely connected and that shell-model calculations may be used to give a great deal of information not normally associated with the shell-model. It has been demonstrated clearly to us that the level spacing fluctuations in nuclear spectra convey very little physical information. This is true when the fluctuations are averaged over the entire spectrum but not if one's interest is in the lowest few states, whose spacings are relatively large. If one wishes to calculate a ground state (say) accurately, that is with an error much smaller than the excitation energy of the first excited state, very high moments, μ/sub n/, n approx. 200, are needed. As I shall show, we use such moments as a matter of course, albeit without actually calculating them; in fact I will try to show that, if at all possible, the actual calculations of moments is to be avoided like the plague. At the heart of the new shell-model methods embodied in the Glasgow shell-model program and one or two similar ones is the so-called Lanczos method and this, it turns out, has many deep and subtle connections with the mathematical theory of moments. It is these connections that I will explore here

  20. On method

    Directory of Open Access Journals (Sweden)

    Frederik Kortlandt

    2018-01-01

    Full Text Available The basis of linguistic reconstruction is the comparative method, which starts from the assumption that there is “a stronger affinity, both in the roots of verbs and in the forms of grammar, than could possibly have been produced by accident”, implying the existence of a common source (thus Sir William Jones in 1786. It follows that there must be a possible sequence of developments from the reconstructed system to the attested data. These developments must have been either phonetically regular or analogical. The latter type of change requires a model and a motivation. A theory which does not account for the data in terms of sound laws and well-motivated analogical changes is not a linguistic reconstruction but philosophical speculation.The pre-laryngealist idea that any Proto-Indo-European long vowel became acute in Balto-Slavic is a typical example of philosophical speculation contradicted by the comparative evidence. Other examples are spontaneous glottalization (Jasanoff’s “acute assignment”, unattested anywhere in the world, Jasanoff’s trimoraic long vowels, Eichner’s law, Osthoff’s law, and Szemerényi’s law, which is an instance of circular reasoning. The Balto-Slavic acute continues the Proto-Indo-European laryngeals and the glottalic feature of the traditional Proto-Indo-European “unaspirated voiced” obstruents (Winter’s law. My reconstruction of Proto-Indo-European glottalic obstruents is based on direct evidence from Indo-Iranian, Armenian, Baltic and Germanic and indirect evidence from Indo-Iranian, Greek, Latin and Slavic.

  1. Methodes non perturbatives en mecanique quantique et en theorie des champs quantiques

    Science.gov (United States)

    Jirari, Hamza

    2001-10-01

    Nous construisons un hamiltonien effectif à partir de l'intégrale de chemin via la méthode Monte-Carlo. Cet hamiltonien décrit les phénomènes physiques dans le domaine de basse énergie. Nous déterminons le spectre d'énergie et les fonctions d'ondes de plusieurs systèmes quantiques. Les résultats obtenus montrent que cette nouvelle approche Monte-Carlo hamiltonienne fonctionne. En mécanique quantique, nous suggérons une expression analytique de l'intégrale de chemin en introduisant une action quantique avec des paramètres renormalisés. Nous présentons des résultats numériques pour quelques potentiels locaux. Cette action quantique offre la possibilité de comparer l'évolution classique et quantique et permet de quantifier les instantons classiques et éventuellement le chaos classique. Nous investiguons la QCD sur un réseau bidimensionnel en utilisant une version améliorée des fermions de Wilson. Nous montrons que la théorie améliorée conduit à une réduction significative des erreurs dues à la valeur finie du pas du réseau. Nous calculons le condensat chiral et la masse de l'état lié quark-antiquark. Nous aboutissons à une bonne concordance entre nos résultats numériques et les résultats analytiques du modèle dans le continu.

  2. Méthode numérique de calcul du mouvement d'un corps flottant soumis à l'influence d'une houle périodique en théorie linéaire Numerical Method for Calculating the Movement of a Floating Body Subjected to the Influence of Theoretically Linear Wave Action

    Directory of Open Access Journals (Sweden)

    Chenot J. -L.

    2006-11-01

    Full Text Available Nous rappelons les équations linéaires du mouvement d'un corps flottant soumis à l'action d'une houle sinusoïdale simple, en précisant les simplifications qui apparaissent lorsque le corps est de révolution. On recherche une solution potentielle dans le domaine fluide, divisé en deux zones : la première zone entoure le corps à distance finie, la seconde est infinie. Dans la première zone, une solution de types éléments finis est adoptée, avec des éléments à huit nceuds, dans le cas général, et des triangles à trois noeuds pour les corps de révolution. Dans la zone numéro deux nous utilisons une solution analytique sous forme d'une série de fonctions tronquée, qui vérifie la condition de radiation. Le raccordement entre les deux zones est assuré exactement pour la dérivée normale du potentiel (vitesse normale, et une formulation du type optimal en moyenne quadratique permet également de raccorder le potentiel. La formulation adoptée permet de conserver tous les avantages de la méthode des éléments finis et, de ce fait, elle est spécialement adaptée à la réalisation d'un modèle numérique [6]. This article reviews the linear equations describing a floating body subject to the effect of a simple sinusoidal wave action, including the simplifications that appear when the body forms a surface of revolution. A potential solution is sought after in the fluid realm divided into two zones : (i one surrounding the body at a finite distance, and (ii the other being infinite. In the first zone, a solution of the finite-element type is adopted, with eight-node elements in the general case and with triangles with three nodes for bodies of revolution. In thé second zone, we use on analytic solution in the form of a series of truncated functions which checks the radiation condition. The connection between the two zones is made exactly for the normal derivative of the potentiel (normal velocity, and a formulation of the

  3. Le transistor VDMOS en régime de quasi-saturation : étude analytique et modélisation

    OpenAIRE

    Bliek , A.; Guerin , J.; El Cheikh , M.K.; Tholomier , M.

    1997-01-01

    La quasi-saturation dans les transistors de puissance (VDMOS) se manifeste aux tensions de grille supérieures à la tension nominale, la limitation du courant associé est liée à la saturation de vitesse des électrons dans la couche N- du composant. Le phénomène a été mis en évidence de façon expérimentale et les résultats obtenus ont été interprétés par une modélisation fine de la cellule MOS. Cette simulation numérique a été réalisée à l'aide du logiciel davinci en utilisant des “modèles" de ...

  4. Étude analytique des comptages cellulaires somatiques du lait en élevage bovin hors sol dans la Tunisie littorale semi-aride

    Directory of Open Access Journals (Sweden)

    Y.M’SADAK

    2017-05-01

    Full Text Available The objective of this work is to analyze individual cell counts (ICC for a complete cow lactation and identify risk factors for mastitis. The study was conducted on a sample of 113 cattle farms on three areas of the semi-arid coastal Tunisia: Sousse, Monastir and Mahdia. The majority of the examined sample flocks had high ICC. The analysis of the ICC in relation to husbandry and milking conditions in three regions helped highlight some factors that significantly affects ICC and the likelihood of the spread of mastitis. For the region of Sousse, the use of a litter reduced to half the ICC that were proven to be highly related to the cleanliness of both the sleeping area and the udder. The milking parameters “udder depth”, “udder cleanliness” and “No teat disinfection” have been shown to affect the ICC and are regarded as causal factors of bovine mastitis. In the region of Monastir, factors that significantly increased ICC (P <0.05 were: free stalling, cleaning milking machine with only water, the poor condition of the pipes, non removal of the first streams of milk and poor cleanliness of the udder and the legs of the cows. For the region of Mahdia, the statistical study revealed that the lack of cleaning and wiping of the udder was associated with high ICC. Regarding the operating parameters of the milking machine, the Pulse Frequency (PF and the Pulse Report (PR had a significant influence on the rise of the ICC.

  5. L'accès différencié aux services urbains en réseau : proposition d'un cadre analytique

    OpenAIRE

    Scherrer, Franck

    2006-01-01

    Cette recherche fait le choix de la thématique des services urbains en réseau, classiquement organisés sous la forme de services publics à caractère industriel et commercial. Ces objets de recherche sont souvent laissés au domaine des Sciences pour l'Ingénieur. Pourtant l'approche par les sciences sociales appliquées, qui est la pratique de chercheurs en urbanisme, est essentielle pour comprendre la façon dont l'organisation et la gestion de ces services urbains en réseau structurent très for...

  6. MODELES ET CALCUL DES SYSTEMES DE SUSPENSION MAGNETIQUE PASSIVE -DEVELOPPEMENTS ET CALCULS ANALYTIQUES EN 2D ET 3D DES INTERACTIONS ENTRE AIMANTS PERMANENTS-

    OpenAIRE

    Allag , Hicham

    2010-01-01

    The passive magnetic suspensions operate using attractive or repulsive forces exerted between permanent magnets. After giving an overview of different possible configurations of magnetic suspensions, the calculation of interactions between permanent magnets was developed. The calculations are realised for parallelepipeds magnets, where the magnetization is represented by distributions of charges or poles (Coulombian approach). All interactions (energy, forces, torques, etc ....) was calculate...

  7. Perspectives analytiques à considérer à propos du rôle de l’Etat dans le tourisme

    Directory of Open Access Journals (Sweden)

    Rodrigo Meira Martoni

    2014-01-01

    Full Text Available The present study suggests the need to consider two analytical perspectives in order to understand the socio-spatial dynamics promoted by the State in the field of tourism: one is general and points out that state power is integrated into class power, and the other focuses on a particular situation, in which the power exercised through the state structure may possess certain operational autonomy. From concrete cases analysed in France and Brazil, the aim is to emphasize that the findings concerning public tourism politics should not just encompass the state apparatus, but the paths established by groups who wield power in the state -and, therefore, clarify the content of policies, their impact and the relations of production engendered or safeguarded by them.

  8. Analytical official report 2. Session of Thursday, 15 June 2006; Compte rendu analytique officiel 2. seance du jeudi 15 juin 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document reports the discussion about the law project relative to the sustainable management of radioactive wastes and materials. This text fixes a reference scheme for the wastes management, and reinforces the necessity of transparency, democracy and deontology. It concerns also the economic aspects and the financing of the dismantling. (A.L.B.)

  9. Approches analytique et expérimentale de la convection naturelle en canal vertical : Application aux double-façades photovoltaïques

    OpenAIRE

    Li , Yiqin

    2016-01-01

    Under the current energy context, the development of solar energy goes through its large scale development, especially in urban areas. Active and integrated solutions, such as photovoltaic double-skins, allow both the heat recovery for building needs and the exploitation of building envelope as collecting surface. Furthermore, this configuration limits the efficiency loss and the acceleration of ageing process due to overheating of the solar cells. Indeed, in this configuration, the photovolt...

  10. Approches analytique et expérimentale de la convection naturelle en canal vertical. : Application aux double-façades photovoltaïques

    OpenAIRE

    LI , Yiqin

    2016-01-01

    Under the current energy context, the development of solar energy goes through its large scale development, especially in urban areas. Active and integrated solutions, such as photovoltaic double-skins, allow both the heat recovery for building needs and the exploitation of building envelope as collecting surface. Furthermore, this configuration limits the efficiency loss and the acceleration of ageing process due to overheating of the solar cells. Indeed, in this configuration, the photovolt...

  11. Méthodes analytiques simplifées pour le calcul aux chocs et aux séismes des portes d'écluse

    OpenAIRE

    Buldgen, Loïc

    2015-01-01

    The PhD dissertation aims to provide simplified tools based on analytical formulations in order to ease the pre-design of lock gates. The first part of the thesis is devoted to ship collisions. The resistance of the impacted gate is evaluated by combining global and local deforming modes. In the second part of the dissertation, an analytical solution is proposed to estimate the total hydrodynamic pressure acting on a lock gate during a seism, with due consideration for the fluid-structure cou...

  12. Stratégie analytique des tradimédicaments : établissement de profils chromatographiques des métabolites phytochimiques apolaires

    OpenAIRE

    Bony, Nicaise françois

    2013-01-01

    The traditional herbal medicines are widely used by African people. But their quality control is difficult, because they are complex mixtures of several herbal drugs or herbal drugs preparations. Their origin is often unknown and/or highly variable. The chromatographic profile of phytochemical metabolites is an important tool for quality assessment of these products.The objective of this work is to propose a protocol for sample preparation and liquid chromatographic and gas chromatographic pr...

  13. Coal - testing methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-01

    This Standard specifies the method for the particle-size analysis, the method for determination of the float and sink characteristics, the method for determination of Hardgrove grindability indices, the method for determination of the crucible swelling number, the method for determination of the swelling properties, the method for determination of the fluidity properties, the method for determination of the coking properties, the method for determination of the fusibility of ash, and the method for determination of Roga indices of coal.

  14. Analysis and development of spatial hp-refinement methods for solving the neutron transport equation; Analyse et developpement de methodes de raffinement hp en espace pour l'equation de transport des neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, D.

    2011-10-10

    flux behaviour is very different depending on the energy, there is no reason to use the same spatial discretization. Such an approach implies to modify the initial estimators in order to take into account the coupling between groups. This study is done from a theoretical as well as from a numerical point of view. (author) [French] Pour la conception des coeurs de reacteurs de 4eme generation, une precision accrue est requise pour les calculs des differents parametres neutroniques. Les ressources memoire et le temps de calcul etant limites, une solution consiste a utiliser des methodes de raffinement de maillage afin de resoudre l'equation de transport des neutrons. Le flux neutronique, solution de cette equation, depend de l'energie, l'angle et l'espace. Les differentes variables sont discretisees de maniere successive. L'energie avec une approche multigroupe, considerant les differentes grandeurs constantes sur chaque groupe, l'angle par une methode de collocation, dite approximation SN. Apres discretisation energetique et angulaire, un systeme d'equations hyperboliques couplees ne dependant plus que de la variable d'espace doit etre resolu. Des elements finis discontinus sont alors utilises afin de permettre la mise en place de methodes de raffinement dite hp. La precision de la solution peut alors etre amelioree via un raffinement en espace (h-raffinement), consistant a subdiviser une cellule en sous-cellules, ou en ordre (p-raffinement) en augmentant l'ordre de la base de polynomes utilisee. Dans cette these, les proprietes de ces methodes sont analysees et montrent l'importance de la regularite de la solution dans le choix du type de raffinement. Ainsi deux estimateurs d'erreurs permettant de mener le raffinement ont ete utilises. Le premier, suppose des hypotheses de regularite tres fortes (solution analytique) alors que le second utilise seulement le fait que la solution est a variations bornees. La

  15. Ensemble Data Mining Methods

    Data.gov (United States)

    National Aeronautics and Space Administration — Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve...

  16. Uranium price forecasting methods

    International Nuclear Information System (INIS)

    Fuller, D.M.

    1994-01-01

    This article reviews a number of forecasting methods that have been applied to uranium prices and compares their relative strengths and weaknesses. The methods reviewed are: (1) judgemental methods, (2) technical analysis, (3) time-series methods, (4) fundamental analysis, and (5) econometric methods. Historically, none of these methods has performed very well, but a well-thought-out model is still useful as a basis from which to adjust to new circumstances and try again

  17. Methods in aquatic bacteriology

    National Research Council Canada - National Science Library

    Austin, B

    1988-01-01

    .... Within these sections detailed chapters consider sampling methods, determination of biomass, isolation methods, identification, the bacterial microflora of fish, invertebrates, plants and the deep...

  18. Dimensionality reduction methods:

    OpenAIRE

    Amenta, Pietro; D'Ambra, Luigi; Gallo, Michele

    2005-01-01

    In case one or more sets of variables are available, the use of dimensional reduction methods could be necessary. In this contest, after a review on the link between the Shrinkage Regression Methods and Dimensional Reduction Methods, authors provide a different multivariate extension of the Garthwaite's PLS approach (1994) where a simple linear regression coefficients framework could be given for several dimensional reduction methods.

  19. analysis methods of uranium

    International Nuclear Information System (INIS)

    Bekdemir, N.; Acarkan, S.

    1997-01-01

    There are various methods for the determination of uranium. The most often used methods are spectrophotometric (PAR, DBM and Arsenazo III) and potentiometric titration methods. For uranium contents between 1-300 g/LU potentiometric titration method based on oxidation-reduction reactions gives reliable results. PAR (1-pyridiyl-2-azo resorcinol) is a sensitive reagent for uranium, forming complexes in aqueous solutions. It is a suitable method for determination of uranium at concentrations between 2-400microgram U. In this study, the spectrophotometric and potentiometric analysis methods, used in the Nuclear Fuel Department will be discussed in detail and other methods and their principles will be briefly mentioned

  20. Inflow Turbulence Generation Methods

    Science.gov (United States)

    Wu, Xiaohua

    2017-01-01

    Research activities on inflow turbulence generation methods have been vigorous over the past quarter century, accompanying advances in eddy-resolving computations of spatially developing turbulent flows with direct numerical simulation, large-eddy simulation (LES), and hybrid Reynolds-averaged Navier-Stokes-LES. The weak recycling method, rooted in scaling arguments on the canonical incompressible boundary layer, has been applied to supersonic boundary layer, rough surface boundary layer, and microscale urban canopy LES coupled with mesoscale numerical weather forecasting. Synthetic methods, originating from analytical approximation to homogeneous isotropic turbulence, have branched out into several robust methods, including the synthetic random Fourier method, synthetic digital filtering method, synthetic coherent eddy method, and synthetic volume forcing method. This article reviews major progress in inflow turbulence generation methods with an emphasis on fundamental ideas, key milestones, representative applications, and critical issues. Directions for future research in the field are also highlighted.

  1. Advanced differential quadrature methods

    CERN Document Server

    Zong, Zhi

    2009-01-01

    Modern Tools to Perform Numerical DifferentiationThe original direct differential quadrature (DQ) method has been known to fail for problems with strong nonlinearity and material discontinuity as well as for problems involving singularity, irregularity, and multiple scales. But now researchers in applied mathematics, computational mechanics, and engineering have developed a range of innovative DQ-based methods to overcome these shortcomings. Advanced Differential Quadrature Methods explores new DQ methods and uses these methods to solve problems beyond the capabilities of the direct DQ method.After a basic introduction to the direct DQ method, the book presents a number of DQ methods, including complex DQ, triangular DQ, multi-scale DQ, variable order DQ, multi-domain DQ, and localized DQ. It also provides a mathematical compendium that summarizes Gauss elimination, the Runge-Kutta method, complex analysis, and more. The final chapter contains three codes written in the FORTRAN language, enabling readers to q...

  2. Methods of nonlinear analysis

    CERN Document Server

    Bellman, Richard Ernest

    1970-01-01

    In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank mat

  3. The three circle method

    International Nuclear Information System (INIS)

    Garncarek, Z.

    1989-01-01

    The three circle method in its general form is presented. The method is especially useful for investigation of shapes of agglomerations of objects. An example of its applications to investigation of galaxies distribution is given. 17 refs. (author)

  4. Dissolution Methods Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — For a drug product that does not have a dissolution test method in the United States Pharmacopeia (USP), the FDA Dissolution Methods Database provides information on...

  5. Design Methods in Practice

    DEFF Research Database (Denmark)

    Jensen, Torben Elgaard; Andreasen, Mogens Myrup

    2010-01-01

    The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...... in Danish companies. The paper concludes that design methods in practice deviate substantially from Pahl & Beitz’s description of method use: The object and problems, which are the starting points for method use, are more contested and less given than generally assumed; The steps of methods are often...

  6. Withdrawal Method (Coitus Interruptus)

    Science.gov (United States)

    Withdrawal method (coitus interruptus) Overview The withdrawal method of contraception, also known as coitus interruptus, is the practice of withdrawing the penis from the vagina and away from a woman's external ...

  7. Conformable variational iteration method

    Directory of Open Access Journals (Sweden)

    Omer Acan

    2017-02-01

    Full Text Available In this study, we introduce the conformable variational iteration method based on new defined fractional derivative called conformable fractional derivative. This new method is applied two fractional order ordinary differential equations. To see how the solutions of this method, linear homogeneous and non-linear non-homogeneous fractional ordinary differential equations are selected. Obtained results are compared the exact solutions and their graphics are plotted to demonstrate efficiency and accuracy of the method.

  8. Noise-Measuring Method

    DEFF Research Database (Denmark)

    Diamond, J. M.

    1965-01-01

    A noise-measuring method based on the use of a calibrated noise generator and an output meter with a special scale is described. The method eliminates the effect of noise contributions occurring in the circuits following the device under test.......A noise-measuring method based on the use of a calibrated noise generator and an output meter with a special scale is described. The method eliminates the effect of noise contributions occurring in the circuits following the device under test....

  9. Basic Finite Element Method

    International Nuclear Information System (INIS)

    Lee, Byeong Hae

    1992-02-01

    This book gives descriptions of basic finite element method, which includes basic finite element method and data, black box, writing of data, definition of VECTOR, definition of matrix, matrix and multiplication of matrix, addition of matrix, and unit matrix, conception of hardness matrix like spring power and displacement, governed equation of an elastic body, finite element method, Fortran method and programming such as composition of computer, order of programming and data card and Fortran card, finite element program and application of nonelastic problem.

  10. Methods in human cytogenetics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Chapter 4, discusses the various techniques used in the study human cytogenetics. The methods are discussed in historical order, from direct methods to tissue culture techniques, prenatal studies, meiotic studies, sex chromatin techniques, banding techniques, prophase banding and replication studies. Nomenclature of human chromosomes and quantitative methods are also mentioned. 60 refs., 3 figs.

  11. Possibilities of roentgenological method

    International Nuclear Information System (INIS)

    Sivash, Eh.S.; Sal'man, M.M.

    1980-01-01

    Literary and experimental data on estimating possibilities of roentgenologic investigations using an electron optical amplifier, X-ray television and roentgen cinematography are generalized. Different methods of studying gastro-intestinal tract are compared. The advantage of the roentgenologic method over the endoscopic method after stomach resection is shown [ru

  12. Mixed methods research.

    Science.gov (United States)

    Halcomb, Elizabeth; Hickman, Louise

    2015-04-08

    Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

  13. Consumer Behavior Research Methods

    DEFF Research Database (Denmark)

    Chrysochou, Polymeros

    2017-01-01

    This chapter starts by distinguishing consumer behavior research methods based on the type of data used, being either secondary or primary. Most consumer behavior research studies phenomena that require researchers to enter the field and collect data on their own, and therefore the chapter...... of the methods and how to improve quality in consumer behavior research methods....

  14. DOE methods compendium

    International Nuclear Information System (INIS)

    Leasure, C.S.

    1992-01-01

    The Department of Energy (DOE) has established an analytical methods compendium development program to integrate its environmental analytical methods. This program is administered through DOE's Laboratory Management Division (EM-563). The primary objective of this program is to assemble a compendium of analytical chemistry methods of known performance for use by all DOE Environmental Restoration and Waste Management program. This compendium will include methods for sampling, field screening, fixed analytical laboratory and mobile analytical laboratory analyses. It will also include specific guidance on the proper selection of appropriate sampling and analytical methods in using specific analytical requirements

  15. The Generalized Sturmian Method

    DEFF Research Database (Denmark)

    Avery, James Emil

    2011-01-01

    these ideas clearly so that they become more accessible. By bringing together these non-standard methods, the book intends to inspire graduate students, postdoctoral researchers and academics to think of novel approaches. Is there a method out there that we have not thought of yet? Can we design a new method...... generations of researchers were left to work out how to achieve this ambitious goal for molecular systems of ever-increasing size. This book focuses on non-mainstream methods to solve the molecular electronic Schrödinger equation. Each method is based on a set of core ideas and this volume aims to explain...

  16. Methods for assessing geodiversity

    Science.gov (United States)

    Zwoliński, Zbigniew; Najwer, Alicja; Giardino, Marco

    2017-04-01

    The accepted systematics of geodiversity assessment methods will be presented in three categories: qualitative, quantitative and qualitative-quantitative. Qualitative methods are usually descriptive methods that are suited to nominal and ordinal data. Quantitative methods use a different set of parameters and indicators to determine the characteristics of geodiversity in the area being researched. Qualitative-quantitative methods are a good combination of the collection of quantitative data (i.e. digital) and cause-effect data (i.e. relational and explanatory). It seems that at the current stage of the development of geodiversity research methods, qualitative-quantitative methods are the most advanced and best assess the geodiversity of the study area. Their particular advantage is the integration of data from different sources and with different substantive content. Among the distinguishing features of the quantitative and qualitative-quantitative methods for assessing geodiversity are their wide use within geographic information systems, both at the stage of data collection and data integration, as well as numerical processing and their presentation. The unresolved problem for these methods, however, is the possibility of their validation. It seems that currently the best method of validation is direct filed confrontation. Looking to the next few years, the development of qualitative-quantitative methods connected with cognitive issues should be expected, oriented towards ontology and the Semantic Web.

  17. Methods of Software Verification

    Directory of Open Access Journals (Sweden)

    R. E. Gurin

    2015-01-01

    Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

  18. Performative Schizoid Method

    DEFF Research Database (Denmark)

    Svabo, Connie

    2016-01-01

    A performative schizoid method is developed as a method contribution to performance as research. The method is inspired by contemporary research in the human and social sciences urging experimentation and researcher engagement with creative and artistic practice. In the article, the method...... is presented and an example is provided of a first exploratory engagement with it. The method is used in a specific project Becoming Iris, making inquiry into arts-based knowledge creation during a three month visiting scholarship at a small, independent visual art academy. Using the performative schizoid...... method in Becoming Iris results in four audio-visual and performance-based productions, centered on an emergent theme of the scholartist as a bird in borrowed feathers. Interestingly, the moral lesson of the fable about the vain jackdaw, who dresses in borrowed peacock feathers and becomes a castout...

  19. On Waveform Multigrid Method

    Science.gov (United States)

    1993-04-01

    shown that the waveform multigrid methods can be implemented on a parallel computer with satisfactory effi- ciencies. In this paper we study the...for steady-state problems. Since extensive research has been done in multigrid methods for steady-state problems [1] [3] [10], this analytic comparison...is very useful in pre- dicting the performance of waveform multigrid methods . Although our discussion was done only for the model heat equation, one

  20. Angular correlation methods

    International Nuclear Information System (INIS)

    Ferguson, A.J.

    1974-01-01

    An outline of the theory of angular correlations is presented, and the difference between the modern density matrix method and the traditional wave function method is stressed. Comments are offered on particular angular correlation theoretical techniques. A brief discussion is given of recent studies of gamma ray angular correlations of reaction products recoiling with high velocity into vacuum. Two methods for optimization to obtain the most accurate expansion coefficients of the correlation are discussed. (1 figure, 53 references) (U.S.)

  1. Unit Commitment Solution Methods

    OpenAIRE

    Sayeed Salam

    2007-01-01

    An effort to develop a unit commitment approach capable of handling large power systems consisting of both thermal and hydro generating units offers a large profitable return. In order to be feasible, the method to be developed must be flexible, efficient and reliable. In this paper, various proposed methods have been described along with their strengths and weaknesses. As all of these methods have some sort of weaknesses, a comprehensive algorithm that combines the stren...

  2. The Feldenkrais method

    OpenAIRE

    Sholl, Robert

    2017-01-01

    In this short article I discuss some strategies in the educational method focused on learning and movement known as the Feldenkrais Method. This was created by the engineer and physicist (also a judo teacher), Mosche Feldenkrais (1904-1984). I will show how this Method can impact upon creative practice referring to the ways in which this was articulated at two conferences held at the University of West London in 2016 and 2017.

  3. The Box Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactor...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

  4. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...

  5. Applied Bayesian hierarchical methods

    National Research Council Canada - National Science Library

    Congdon, P

    2010-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Posterior Inference from Bayes Formula . . . . . . . . . . . . 1.3 Markov Chain Monte Carlo Sampling in Relation to Monte Carlo Methods: Obtaining Posterior...

  6. Nondestructive testing method

    International Nuclear Information System (INIS)

    Porter, J.F.

    1996-01-01

    Nondestructive testing (NDT) is the use of physical and chemical methods for evaluating material integrity without impairing its intended usefulness or continuing service. Nondestructive tests are used by manufaturer's for the following reasons: 1) to ensure product reliability; 2) to prevent accidents and save human lives; 3) to aid in better product design; 4) to control manufacturing processes; and 5) to maintain a uniform quality level. Nondestructive testing is used extensively on power plants, oil and chemical refineries, offshore oil rigs and pipeline (NDT can even be conducted underwater), welds on tanks, boilers, pressure vessels and heat exchengers. NDT is now being used for testing concrete and composite materials. Because of the criticality of its application, NDT should be performed and the results evaluated by qualified personnel. There are five basic nondestructive examination methods: 1) liquid penetrant testing - method used for detecting surface flaws in materials. This method can be used for metallic and nonmetallic materials, portable and relatively inexpensive. 2) magnetic particle testing - method used to detect surface and subsurface flaws in ferromagnetic materials; 3) radiographic testing - method used to detect internal flaws and significant variation in material composition and thickness; 4) ultrasonic testing - method used to detect internal and external flaws in materials. This method uses ultrasonics to measure thickness of a material or to examine the internal structure for discontinuities. 5) eddy current testing - method used to detect surface and subsurface flaws in conductive materials. Not one nondestructive examination method can find all discontinuities in all of the materials capable of being tested. The most important consideration is for the specifier of the test to be familiar with the test method and its applicability to the type and geometry of the material and the flaws to be detected

  7. Biographical Wardrobe Method

    DEFF Research Database (Denmark)

    Skjold, Else

    2017-01-01

    The contribution presents, in a short and hands-on manner, the way in which I go about conducting the wardrobe method. The book as a whole is specifically aimed at students and designers who wish to work with the wardrobe method but do not have the time to study the more theoretical perspectives....

  8. Light microscope alignment methods.

    Science.gov (United States)

    Bagnell, Robert

    2014-01-01

    Instructions for proper alignment for each of the most common wide field light microscopy contrast techniques are presented: bright field, polarization, dark field, phase contrast, differential interference contrast, and fluorescence. These are then followed by methods on photomicrography, measurement, and cleaning. An extensive set of Notes provides practical tips for each of these methods.

  9. Water treatment method

    Science.gov (United States)

    Martin, F.S.; Silver, G.L.

    1991-04-30

    A method is described for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

  10. Dynamic encryption method

    DEFF Research Database (Denmark)

    2013-01-01

    Disclosed is a method of transmitting a data set using encryption, wherein the method comprises the steps of: selecting a first encryption technique, wherein said first encryption technique comprises a first encryption algorithm for encrypting plain data into cipher data, and a first decryption...

  11. WWW: The Scientific Method

    Science.gov (United States)

    Blystone, Robert V.; Blodgett, Kevin

    2006-01-01

    The scientific method is the principal methodology by which biological knowledge is gained and disseminated. As fundamental as the scientific method may be, its historical development is poorly understood, its definition is variable, and its deployment is uneven. Scientific progress may occur without the strictures imposed by the formal…

  12. Methods for data classification

    Science.gov (United States)

    Garrity, George [Okemos, MI; Lilburn, Timothy G [Front Royal, VA

    2011-10-11

    The present invention provides methods for classifying data and uncovering and correcting annotation errors. In particular, the present invention provides a self-organizing, self-correcting algorithm for use in classifying data. Additionally, the present invention provides a method for classifying biological taxa.

  13. Research Methods in Education

    Science.gov (United States)

    Check, Joseph; Schutt, Russell K.

    2011-01-01

    "Research Methods in Education" introduces research methods as an integrated set of techniques for investigating questions about the educational world. This lively, innovative text helps students connect technique and substance, appreciate the value of both qualitative and quantitative methodologies, and make ethical research decisions.…

  14. The PANGLOSS method

    NARCIS (Netherlands)

    Bogaards, K.; Ferreira Pires, Luis; Pras, Aiko; Schot, J.

    1988-01-01

    A method for the development of concurrent and distributed systems is described. The method follows from a project (PANGLOSS) that aims at developing a high performance gateway. It emphasizes the use of a formal description technique (LOTOS) and a cyclic approach. In the cyclic approach, the design

  15. Water treatment method

    Science.gov (United States)

    Martin, Frank S.; Silver, Gary L.

    1991-04-30

    A method for reducing the concentration of any undesirable metals dissolved in contaminated water, such as waste water. The method involves uniformly reacting the contaminated water with an excess amount of solid particulate calcium sulfite to insolubilize the undesirable metal ions, followed by removal thereof and of the unreacted calcium sulfite.

  16. Cooperative method development

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; Rönkkö, Kari; Eriksson, Jeanette

    2008-01-01

    The development of methods tools and process improvements is best to be based on the understanding of the development practice to be supported. Qualitative research has been proposed as a method for understanding the social and cooperative aspects of software development. However, qualitative...... research is not easily combined with the improvement orientation of an engineering discipline. During the last 6 years, we have applied an approach we call `cooperative method development', which combines qualitative social science fieldwork, with problem-oriented method, technique and process improvement....... The action research based approach focusing on shop floor software development practices allows an understanding of how contextual contingencies influence the deployment and applicability of methods, processes and techniques. This article summarizes the experiences and discusses the further development...

  17. Adaptive method of lines

    CERN Document Server

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  18. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2006-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and 267 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers and professors in biophysics, biochemistry and related fields. Special features in the 2nd edition: • Illustrates the high-resolution methods for ultrashort-living protei...

  19. Engaging with mobile methods

    DEFF Research Database (Denmark)

    Jensen, Martin Trandberg

    2014-01-01

    This chapter showcases how mobile methods are more than calibrated techniques awaiting application by tourism researchers, but productive in the enactment of the mobile (Law and Urry, 2004). Drawing upon recent findings deriving from a PhD course on mobility and mobile methods it reveals......, the engagements with methods are acknowledged to be always political and contextual, reminding us to avoid essentialist discussions regarding research methods. Finally, the chapter draws on recent fieldwork to extend developments in mobilities-oriented tourism research, by employing auto-ethnography to call...... the conceptual ambiguousness of the term ‘mobile methods’. In order to explore this ambiguousness the chapter provides a number of examples deriving from tourism research, to explore how mobile methods are always entangled in ideologies, predispositions, conventions and practice-realities. Accordingly...

  20. Determination method of radiostrontium

    International Nuclear Information System (INIS)

    1984-01-01

    This manual provides determination methods of strontium-90 and strontium-89 in the environment released from nuclear facilities, and it is a revised edition of the previous manual published in 1974. As for the preparation method of radiation counting sample, ion exchange method, oxalate separation method and solvent extraction method were adopted in addition to the method of fuming nitric acid separation adopted in the previous edition. Strontium-90 is determined by the separation and radioactivity determination of yttrium-90 in radioequilibrium with strontium-90. Strontium-89 is determined by subtraction of radioactivity of strontium-90 plus yttrium-90 from gross radioactivity of isolated strontium carbonate. Radioactivity determination should be carried out with a low-background 2 π-gas-flow counting system for the mounted sample on a filter having a chemical form of ferric hydroxide, yttrium oxalate or strontium carbonate. This manual describes sample preparation procedures as well as radioactivity counting procedures for environmental samples of precipitates as rain or snow, airborne dust, fresh water, sea water and soil, and also for ash sample made from biological or food samples such as grains, vegetables, tea leaves, pine needle, milk, marine organisms, and total diet, by employing a method of fuming nitric acid separation, ion exchange separation, oxalate precipitate separation or solvent extraction separation (only for an ash sample). Procedures for reagent chemicals preparation is also attached to this manual. (Takagi, S.)

  1. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature......The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...

  2. Introduction to multigrid methods

    Science.gov (United States)

    Wesseling, P.

    1995-01-01

    These notes were written for an introductory course on the application of multigrid methods to elliptic and hyperbolic partial differential equations for engineers, physicists and applied mathematicians. The use of more advanced mathematical tools, such as functional analysis, is avoided. The course is intended to be accessible to a wide audience of users of computational methods. We restrict ourselves to finite volume and finite difference discretization. The basic principles are given. Smoothing methods and Fourier smoothing analysis are reviewed. The fundamental multigrid algorithm is studied. The smoothing and coarse grid approximation properties are discussed. Multigrid schedules and structured programming of multigrid algorithms are treated. Robustness and efficiency are considered.

  3. The Prescribed Velocity Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The- velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactory...... description of this momentum flow. The Prescribed Velocity Method is a practical method for the description of an Air Terminal Device which will save grid points close to the opening and ensure the right level of the momentum flow....

  4. Montessori Method and ICTs

    Directory of Open Access Journals (Sweden)

    Athanasios Drigas

    2016-03-01

    Full Text Available This article bridges the gap between the Montessori Method and Information and Communication Technologies (ICTs in contemporary education. It reviews recent research works which recall the Montessori philosophy, principles and didactical tools applying to today’s computers and supporting technologies in children’s learning process. This article reviews how important the stimulation of human senses in the learning process is, as well as the development of Montessori materials using the body and the hand in particular, all according to the Montessori Method along with recent researches over ICTs. Montessori Method within information society age acquires new perspectives, new functionality and new efficacy.

  5. Catalytic reforming methods

    Science.gov (United States)

    Tadd, Andrew R; Schwank, Johannes

    2013-05-14

    A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

  6. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  7. Applied nonparametric statistical methods

    CERN Document Server

    Sprent, Peter

    2007-01-01

    While preserving the clear, accessible style of previous editions, Applied Nonparametric Statistical Methods, Fourth Edition reflects the latest developments in computer-intensive methods that deal with intractable analytical problems and unwieldy data sets. Reorganized and with additional material, this edition begins with a brief summary of some relevant general statistical concepts and an introduction to basic ideas of nonparametric or distribution-free methods. Designed experiments, including those with factorial treatment structures, are now the focus of an entire chapter. The text also e

  8. Methods in mummy research

    DEFF Research Database (Denmark)

    Lynnerup, Niels

    2009-01-01

    Mummies are human remains with preservation of non-bony tissue. Many mummy studies focus on the development and application of non-destructive methods for examining mummies, including radiography, CT-scanning with advanced 3-dimensional visualisations, and endoscopic techniques, as well as minima......Mummies are human remains with preservation of non-bony tissue. Many mummy studies focus on the development and application of non-destructive methods for examining mummies, including radiography, CT-scanning with advanced 3-dimensional visualisations, and endoscopic techniques, as well...... as minimally-destructive chemical, physical and biological methods for, e.g., stable isotopes, trace metals and DNA....

  9. Supernodal methods in neutronics

    International Nuclear Information System (INIS)

    Planchard, J.

    1990-01-01

    The necessity to carry up, in very short times, calculations of neutron diffusion requires to use supernodal methods. The computation time being proportional to the number of discretization nodes, the supernodal methods use cells which can contain several fuel assemblies; a Green function is then associated with each node, defining a relation between the source, the fluxes and the currents on its faces. The conservation of the fluxes and currents on each interface allows to compute the power distribution inside the reactor core. The paper describes the supernodal method and defines its domain of application. A brief description of the Westinghouse code SUPERNOVA is done [fr

  10. Generalized subspace correction methods

    Energy Technology Data Exchange (ETDEWEB)

    Kolm, P. [Royal Institute of Technology, Stockholm (Sweden); Arbenz, P.; Gander, W. [Eidgenoessiche Technische Hochschule, Zuerich (Switzerland)

    1996-12-31

    A fundamental problem in scientific computing is the solution of large sparse systems of linear equations. Often these systems arise from the discretization of differential equations by finite difference, finite volume or finite element methods. Iterative methods exploiting these sparse structures have proven to be very effective on conventional computers for a wide area of applications. Due to the rapid development and increasing demand for the large computing powers of parallel computers, it has become important to design iterative methods specialized for these new architectures.

  11. Withdrawal Method (Coitus Interruptus)

    Science.gov (United States)

    ... fluid and pregnancy Withdrawal method (coitus interruptus) About Advertisement Mayo Clinic does not endorse companies or products. ... a Job Site Map About This Site Twitter Facebook Google YouTube Pinterest Mayo Clinic is a not- ...

  12. Ensemble Data Mining Methods

    Science.gov (United States)

    Oza, Nikunj C.

    2004-01-01

    Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve better prediction accuracy than any of the individual models could on their own. The basic goal when designing an ensemble is the same as when establishing a committee of people: each member of the committee should be as competent as possible, but the members should be complementary to one another. If the members are not complementary, Le., if they always agree, then the committee is unnecessary---any one member is sufficient. If the members are complementary, then when one or a few members make an error, the probability is high that the remaining members can correct this error. Research in ensemble methods has largely revolved around designing ensembles consisting of competent yet complementary models.

  13. Seismic Reflection Methods

    Science.gov (United States)

    Seismic methods are the most commonly conducted geophysical surveys for engineering investigations. Seismic refraction provides engineers and geologists with the most basic of geologic data via simple procedures with common equipment.

  14. Methods of dating

    International Nuclear Information System (INIS)

    Gatty, B.

    1986-01-01

    Scientific methods of dating, born less than thirty years ago, have recently improved tremendously. First the dating principles will be given; then it will be explained how, through natural radioactivity, we can have access to the age of an event or an object; the case of radiocarbon will be especially emphasized. The principle of relative methods such as thermoluminescence or paleomagnetism will also be shortly given. What is the use for dating. The fields of its application are numerous; through these methods, relatively precise ages can be given to the major events which have been keys in the history of universe, life and man; thus, dating is a useful scientific tool in astrophysics, geology, biology, anthropology and archeology. Even if certain ages are still subject to controversies, we can say that these methods have confirmed evolution's continuity, be it on a cosmic, biologic or human scale, where ages are measured in billions, millions or thousands of years respectively [fr

  15. Methods for cellobiosan utilization

    Energy Technology Data Exchange (ETDEWEB)

    Linger, Jeffrey; Beckham, Gregg T.

    2017-07-11

    Disclosed herein are enzymes useful for the degradation of cellobiosan in materials such a pyrolysis oils. Methods of degrading cellobiosan using enzymes or organisms expressing the same are also disclosed.

  16. Concrete compositions and methods

    Science.gov (United States)

    Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua

    2015-06-23

    Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.

  17. GEM simulation methods development

    International Nuclear Information System (INIS)

    Tikhonov, V.; Veenhof, R.

    2002-01-01

    A review of methods used in the simulation of processes in gas electron multipliers (GEMs) and in the accurate calculation of detector characteristics is presented. Such detector characteristics as effective gas gain, transparency, charge collection and losses have been calculated and optimized for a number of GEM geometries and compared with experiment. A method and a new special program for calculations of detector macro-characteristics such as signal response in a real detector readout structure, and spatial and time resolution of detectors have been developed and used for detector optimization. A detailed development of signal induction on readout electrodes and electronics characteristics are included in the new program. A method for the simulation of charging-up effects in GEM detectors is described. All methods show good agreement with experiment

  18. Stochastic optimization methods

    CERN Document Server

    Marti, Kurt

    2005-01-01

    Optimization problems arising in practice involve random parameters. For the computation of robust optimal solutions, i.e., optimal solutions being insensitive with respect to random parameter variations, deterministic substitute problems are needed. Based on the distribution of the random data, and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into deterministic substitute problems. Due to the occurring probabilities and expectations, approximative solution techniques must be applied. Deterministic and stochastic approximation methods and their analytical properties are provided: Taylor expansion, regression and response surface methods, probability inequalities, First Order Reliability Methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation methods, differentiation of probability and mean value functions. Convergence results of the resulting iterative solution procedures are given.

  19. Lean Government Methods Guide

    Science.gov (United States)

    This Guide focuses primarily on Lean production, which is an organizational improvement philosophy and set of methods that originated in manufacturing but has been expanded to government and service sectors.

  20. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2010-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

  1. Methods of neutron spectrometry

    International Nuclear Information System (INIS)

    Doerschel, B.

    1981-01-01

    The different methods of neutron spectrometry are based on the direct measurement of neutron velocity or on the use of suitable energy-dependent interaction processes. In the latter case the measuring effect of a detector is connected with the searched neutron spectrum by an integral equation. The solution needs suitable unfolding procedures. The most important methods of neutron spectrometry are the time-of-flight method, the crystal spectrometry, the neutron spectrometry by use of elastic collisions with hydrogen nuclei, and neutron spectrometry with the aid of nuclear reactions, especially of the neutron-induced activation. The advantages and disadvantages of these methods are contrasted considering the resolution, the measurable energy range, the sensitivity, and the experimental and computational efforts. (author)

  2. Diagnostic method and reagent

    International Nuclear Information System (INIS)

    Edgington, T.S.; Plow, E.F.

    1979-01-01

    The discovery of an isomeric species of carcinoembryonic antigen and methods of isolation, identification and utilization as a radiolabelled species of the same as an aid in the diagnosis of adenocarcinomas of the gastrointestinal tract are disclosed. 13 claims

  3. Nuclear methods monitor nutrition

    International Nuclear Information System (INIS)

    Allen, B.J.

    1988-01-01

    Neutron activation of nitrogen and hydrogen in the body, the isotope dilution technique and the measurement of naturally radioactive potassium in the body are among the new nuclear methods, now under collaborative development by the Australian Nuclear Scientific and Technology Organization and medical specialists from several Sydney hospitals. These methods allow medical specialists to monitor the patient's response to various diets and dietary treatments in cases of cystic fibrosis, anorexia nervosa, long-term surgical trauma, renal diseases and AIDS. ills

  4. Method of immunoassay

    International Nuclear Information System (INIS)

    Scarisbrick, J.; Gard, T.; Hall, C.C.

    1983-01-01

    The invention relates to a method of immunoassay for prolactin using monoclonal lgG antibodies. The method preferably comprises the use of two different monoclonal antibodies which bind respectively at different antigenic sites on the prolactin molecule. One antibody is labelled and the other is immobilised on a water-insoluble carrier material, whereby an immunochemical complex comprising labelled antibody, prolactin and immobilised antibody is formed. (author)

  5. The fission track method

    International Nuclear Information System (INIS)

    Hansen, K.

    1990-01-01

    During the last decade fission track (FT) analysis has evolved as an important tool in exploration for hydrocarbon resources. Most important is this method's ability to yield information about temperatures at different times (history), and thus relate oil generation and time independently of other maturity parameters. The purpose of this paper is to introduce the basics of the method and give an example from the author's studies. (AB) (14 refs.)

  6. Choosing a reprocessing method.

    Science.gov (United States)

    Bolding, Barbara

    2004-06-01

    The choice of a reprocessing method depends on many factors and there is no one perfect method that suits all situations. The needs of patients, staff and the healthcare facility, as well as the types of products available at any given time, will all influence the decision. And that decision will not be final. Products change as do consumer needs. As a result the reprocessing decision will need to be reviewed, on a regular basis, in order to ensure that it remains current.

  7. Methodical ICT Project Management

    OpenAIRE

    Anna Kaczorowska; Sabina Motyka; Jolanta Słoniec

    2016-01-01

    The main aim of this publication is to provide the practitioners and theoreticians of project management with an indispensable insight into the offer of the best methods of ICT projects and their best adjustment to the organization's actual needs. The morphological analysis was used to construct the tool for evaluation of the needs and level of support offered by the ICT project management methods. The use of morphological matrix as a research tool allowed to carry out a comprehensive analysi...

  8. Methods of experimental physics

    CERN Document Server

    Williams, Dudley

    1962-01-01

    Methods of Experimental Physics, Volume 3: Molecular Physics focuses on molecular theory, spectroscopy, resonance, molecular beams, and electric and thermodynamic properties. The manuscript first considers the origins of molecular theory, molecular physics, and molecular spectroscopy, as well as microwave spectroscopy, electronic spectra, and Raman effect. The text then ponders on diffraction methods of molecular structure determination and resonance studies. Topics include techniques of electron, neutron, and x-ray diffraction and nuclear magnetic, nuclear quadropole, and electron spin reson

  9. Method of treating depression

    Science.gov (United States)

    Henn, Fritz [East Patchogue, NY

    2012-01-24

    Methods for treatment of depression-related mood disorders in mammals, particularly humans are disclosed. The methods of the invention include administration of compounds capable of enhancing glutamate transporter activity in the brain of mammals suffering from depression. ATP-sensitive K.sup.+ channel openers and .beta.-lactam antibiotics are used to enhance glutamate transport and to treat depression-related mood disorders and depressive symptoms.

  10. On Danish Legal Method

    DEFF Research Database (Denmark)

    Schaumburg-Müller, Sten

    2014-01-01

    On the basis on 1) the Danish legal writer A.S.Ørsted (1778-1860) and 2) an enquete among present day Danish legal scholars, the contribution deals with special traits in Danish legal method......On the basis on 1) the Danish legal writer A.S.Ørsted (1778-1860) and 2) an enquete among present day Danish legal scholars, the contribution deals with special traits in Danish legal method...

  11. Continuation Newton methods

    Czech Academy of Sciences Publication Activity Database

    Axelsson, Owe; Sysala, Stanislav

    2015-01-01

    Roč. 70, č. 11 (2015), s. 2621-2637 ISSN 0898-1221 R&D Projects: GA ČR GA13-18652S Institutional support: RVO:68145535 Keywords : system of nonlinear equations * Newton method * load increment method * elastoplasticity Subject RIV: IN - Informatics, Computer Science Impact factor: 1.398, year: 2015 http://www.sciencedirect.com/science/article/pii/S0898122115003818

  12. Multicriteria identification sets method

    Science.gov (United States)

    Kamenev, G. K.

    2016-11-01

    A multicriteria identification and prediction method for mathematical models of simulation type in the case of several identification criteria (error functions) is proposed. The necessity of the multicriteria formulation arises, for example, when one needs to take into account errors of completely different origins (not reducible to a single characteristic) or when there is no information on the class of noise in the data to be analyzed. An identification sets method is described based on the approximation and visualization of the multidimensional graph of the identification error function and sets of suboptimal parameters. This method allows for additional advantages of the multicriteria approach, namely, the construction and visual analysis of the frontier and the effective identification set (frontier and the Pareto set for identification criteria), various representations of the sets of Pareto effective and subeffective parameter combinations, and the corresponding predictive trajectory tubes. The approximation is based on the deep holes method, which yields metric ɛ-coverings with nearly optimal properties, and on multiphase approximation methods for the Edgeworth-Pareto hull. The visualization relies on the approach of interactive decision maps. With the use of the multicriteria method, multiple-choice solutions of identification and prediction problems can be produced and justified by analyzing the stability of the optimal solution not only with respect to the parameters (robustness with respect to data) but also with respect to the chosen set of identification criteria (robustness with respect to the given collection of functionals).

  13. [Barrier methods of contraception].

    Science.gov (United States)

    Goldsmith, A; Edelman, D A

    1982-01-01

    Vaginal methods of contraception were the earliest types used and some references to them date back to antiquity. Most of the vaginal contraceptive agents identified by the ancient Greeks, Indians, Japanese, and Chinese have been found in modern laboratory tests to have spermicidal properties, but it is doubtful that the methods were fully reliable or were used by many people. During the 19th century the condom, vaginal spermicides, and diaphragm became available. The development of nonoxynol-9 and other nonirritating but effective spermicidal agents improved vaginal contraceptives greatly by the 1950s, but starting in the 1960s newer methods began to replace the vaginal methods. Interest in barrier methods has been reawakened somewhat by concern about the health effects of hormonal methods. At present all barrier methods leave something to be desired. Failure rates of 3-30% for barrier methods in general have been estimated, but the higher rates are believed due to incorrect or inconsistent use. Theoretical failure rates of condoms and diaphragms have been estimated at 3/100 women-years, but in actual use failure rates may reach 15 for condoms and 13 for diaphragms used with spermicides. Use-effectiveness rates are greatly influenced by motivation. For a variety of reasons, the acceptability of barrier methods is low, especially in developing countries. New developments in spermicidal agents include sperm inhibitors, which impede the fertilizing capacity of sperm rather than attempting a spermicidal effect; a number of such agents have been studied and have proven more effective in animal tests than conventional spermicides. Neosampoon, a new spermicidal foam, has attracted an increasing number of users, especially in developing countries. A new condom, made of thin polymers and containing a standard dose of nonoxynol-9, has been designed to dissolve in the vaginal fluid. Further studies are needed of its acceptability, efficacy, and side effects before it becomes

  14. VALUATION METHODS- LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Dorisz Talas

    2015-07-01

    Full Text Available This paper is a theoretical overview of the often used valuation methods with the help of which the value of a firm or its equity is calculated. Many experts (including Aswath Damodaran, Guochang Zhang and CA Hozefa Natalwala classify the methods. The basic models are based on discounted cash flows. The main method uses the free cash flow for valuation, but there are some newer methods that reveal and correct the weaknesses of the traditional models. The valuation of flexibility of management can be conducted mainly with real options. This paper briefly describes the essence of the Dividend Discount Model, the Free Cash Flow Model, the benefit from using real options and the Residual Income Model. There are a few words about the Adjusted Present Value approach as well. Different models uses different premises, and an overall truth is that if the required premises are real and correct, the value will be appropriately accurate. Another important condition is that experts, analysts should choose between the models on the basis of the purpose of valuation. Thus there are no good or bad methods, only methods that fit different goals and aims. The main task is to define exactly the purpose, then to find the most appropriate valuation technique. All the methods originates from the premise that the value of an asset is the present value of its future cash flows. According to the different points of view of different techniques the resulted values can be also differed from each other. Valuation models and techniques should be adapted to the rapidly changing world, but the basic statements remain the same. On the other hand there is a need for more accurate models in order to help investors get as many information as they could. Today information is one of the most important resources and financial models should keep up with this trend.

  15. Manual of Scaling Methods

    Science.gov (United States)

    Bond, Thomas H. (Technical Monitor); Anderson, David N.

    2004-01-01

    This manual reviews the derivation of the similitude relationships believed to be important to ice accretion and examines ice-accretion data to evaluate their importance. Both size scaling and test-condition scaling methods employing the resulting similarity parameters are described, and experimental icing tests performed to evaluate scaling methods are reviewed with results. The material included applies primarily to unprotected, unswept geometries, but some discussion of how to approach other situations is included as well. The studies given here and scaling methods considered are applicable only to Appendix-C icing conditions. Nearly all of the experimental results presented have been obtained in sea-level tunnels. Recommendations are given regarding which scaling methods to use for both size scaling and test-condition scaling, and icing test results are described to support those recommendations. Facility limitations and size-scaling restrictions are discussed. Finally, appendices summarize the air, water and ice properties used in NASA scaling studies, give expressions for each of the similarity parameters used and provide sample calculations for the size-scaling and test-condition scaling methods advocated.

  16. Battery equalization active methods

    Science.gov (United States)

    Gallardo-Lozano, Javier; Romero-Cadaval, Enrique; Milanes-Montero, M. Isabel; Guerrero-Martinez, Miguel A.

    2014-01-01

    Many different battery technologies are available for the applications which need energy storage. New researches are being focused on Lithium-based batteries, since they are becoming the most viable option for portable energy storage applications. As most of the applications need series battery strings to meet voltage requirements, battery imbalance is an important matter to be taken into account, since it leads the individual battery voltages to drift apart over time, and premature cells degradation, safety hazards, and capacity reduction will occur. A large number of battery equalization methods can be found, which present different advantages/disadvantages and are suitable for different applications. The present paper presents a summary, comparison and evaluation of the different active battery equalization methods, providing a table that compares them, which is helpful to select the suitable equalization method depending on the application. By applying the same weight to the different parameters of comparison, switch capacitor and double-tiered switching capacitor have the highest ratio. Cell bypass methods are cheap and cell to cell ones are efficient. Cell to pack, pack to cell and cell to pack to cell methods present a higher cost, size, and control complexity, but relatively low voltage and current stress in high-power applications.

  17. Fashion, Mediations & Method Assemblages

    DEFF Research Database (Denmark)

    Sommerlund, Julie; Jespersen, Astrid Pernille

    , respectively. The paper thus takes on aesthetics and the social in a manner closely related to a core argument of STS - namely that the scientific fact, and the social processes of constructing, distributing, and using that fact, are co-constructed (Callon, 1986; Latour, 1993). The paper thus contributes......, it is an important ambition of this paper to go into a methodological discussion of how "that which effectively happens" can be approached. To this end, the paper will combine Hennion's term of the "mediator" with John Laws methodological term of "method assemblages". Method assemblages is a suggested as a way...... of handling multiple, fluid realities with multiple, fluid methods. Empirically, the paper works with mediation in fashion - that is efforts the active shaping of relations between producer and consumer through communication, marketing and PR. Fashion mediation is by no means simple, but organise complex...

  18. Shape Bonding method

    Science.gov (United States)

    Pontius, James T. (Inventor)

    2010-01-01

    The present invention is directed to a method of bonding at least two surfaces together. The methods step of the present invention include applying a strip of adhesive to a first surface along a predefined outer boundary of a bond area and thereby defining a remaining open area there within. A second surface, or gusset plate, is affixed onto the adhesive before the adhesive cures. The strip of adhesive is allowed to cure and then a second amount of adhesive is applied to cover the remaining open area and substantially fill a void between said first and second surfaces about said bond area. A stencil may be used to precisely apply the strip of adhesive. When the strip cures, it acts as a dam to prevent overflow of the subsequent application of adhesive to undesired areas. The method results in a precise bond area free of undesired shapes and of a preferred profile which eliminate the drawbacks of the prior art bonds.

  19. Energy methods in dynamics

    CERN Document Server

    Le, Khanh Chau

    2012-01-01

    The above examples should make clear the necessity of understanding the mechanism of vibrations and waves in order to control them in an optimal way. However vibrations and waves are governed by differential equations which require, as a rule, rather complicated mathematical methods for their analysis. The aim of this textbook is to help students acquire both a good grasp of the first principles from which the governing equations can be derived, and the adequate mathematical methods for their solving. Its distinctive features, as seen from the title, lie in the systematic and intensive use of Hamilton's variational principle and its generalizations for deriving the governing equations of conservative and dissipative mechanical systems, and also in providing the direct variational-asymptotic analysis, whenever available, of the energy and dissipation for the solution of these equations. It will be demonstrated that many well-known methods in dynamics like those of Lindstedt-Poincare, Bogoliubov-Mitropolsky, Ko...

  20. Energy methods in dynamics

    CERN Document Server

    Le, Khanh Chau

    2014-01-01

    Energy Methods in Dynamics is a textbook based on the lectures given by the first author at Ruhr University Bochum, Germany. Its aim is to help students acquire both a good grasp of the first principles from which the governing equations can be derived, and the adequate mathematical methods for their solving. Its distinctive features, as seen from the title, lie in the systematic and intensive use of Hamilton's variational principle and its generalizations for deriving the governing equations of conservative and dissipative mechanical systems, and also in providing the direct variational-asymptotic analysis, whenever available, of the energy and dissipation for the solution of these equations. It demonstrates that many well-known methods in dynamics like those of Lindstedt-Poincare, Bogoliubov-Mitropolsky, Kolmogorov-Arnold-Moser (KAM), Wentzel–Kramers–Brillouin (WKB),  and Whitham are derivable from this variational-asymptotic analysis.   This second edition includes the solutions to all exercises as w...

  1. Actinide extraction methods

    Science.gov (United States)

    Peterman, Dean R [Idaho Falls, ID; Klaehn, John R [Idaho Falls, ID; Harrup, Mason K [Idaho Falls, ID; Tillotson, Richard D [Moore, ID; Law, Jack D [Pocatello, ID

    2010-09-21

    Methods of separating actinides from lanthanides are disclosed. A regio-specific/stereo-specific dithiophosphinic acid having organic moieties is provided in an organic solvent that is then contacted with an acidic medium containing an actinide and a lanthanide. The method can extend to separating actinides from one another. Actinides are extracted as a complex with the dithiophosphinic acid. Separation compositions include an aqueous phase, an organic phase, dithiophosphinic acid, and at least one actinide. The compositions may include additional actinides and/or lanthanides. A method of producing a dithiophosphinic acid comprising at least two organic moieties selected from aromatics and alkyls, each moiety having at least one functional group is also disclosed. A source of sulfur is reacted with a halophosphine. An ammonium salt of the dithiophosphinic acid product is precipitated out of the reaction mixture. The precipitated salt is dissolved in ether. The ether is removed to yield the dithiophosphinic acid.

  2. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  3. Model Correction Factor Method

    DEFF Research Database (Denmark)

    Christensen, Claus; Randrup-Thomsen, Søren; Morsing Johannesen, Johannes

    1997-01-01

    The model correction factor method is proposed as an alternative to traditional polynomial based response surface techniques in structural reliability considering a computationally time consuming limit state procedure as a 'black box'. The class of polynomial functions is replaced by a limit...... statebased on an idealized mechanical model to be adapted to the original limit state by the model correction factor. Reliable approximations are obtained by iterative use of gradient information on the original limit state function analogously to previous response surface approaches. However, the strength...... of the model correction factor method, is that in simpler form not using gradient information on the original limit state function or only using this information once, a drastic reduction of the number of limit state evaluation is obtained together with good approximations on the reliability. Methods...

  4. Methods for RNA Analysis

    DEFF Research Database (Denmark)

    Olivarius, Signe

    RNAs rely on interactions with proteins, the establishment of protein-binding profiles is essential for the characterization of RNAs. Aiming to facilitate RNA analysis, this thesis introduces proteomics- as well as transcriptomics-based methods for the functional characterization of RNA. First, RNA......-protein pulldown combined with mass spectrometry analysis is applied for in vivo as well as in vitro identification of RNA-binding proteins, the latter succeeding in verifying known RNA-protein interactions. Secondly, acknowledging the significance of flexible promoter usage for the diversification...... of the transcriptome, 5’ end capture of RNA is combined with next-generation sequencing for high-throughput quantitative assessment of transcription start sites by two different methods. The methods presented here allow for functional investigation of coding as well as noncoding RNA and contribute to future...

  5. Independent random sampling methods

    CERN Document Server

    Martino, Luca; Míguez, Joaquín

    2018-01-01

    This book systematically addresses the design and analysis of efficient techniques for independent random sampling. Both general-purpose approaches, which can be used to generate samples from arbitrary probability distributions, and tailored techniques, designed to efficiently address common real-world practical problems, are introduced and discussed in detail. In turn, the monograph presents fundamental results and methodologies in the field, elaborating and developing them into the latest techniques. The theory and methods are illustrated with a varied collection of examples, which are discussed in detail in the text and supplemented with ready-to-run computer code. The main problem addressed in the book is how to generate independent random samples from an arbitrary probability distribution with the weakest possible constraints or assumptions in a form suitable for practical implementation. The authors review the fundamental results and methods in the field, address the latest methods, and emphasize the li...

  6. Nuclear methods for tribology

    International Nuclear Information System (INIS)

    Racolta, P.M.

    1994-01-01

    The tribological field of activity is mainly concerned with the relative movement of different machine components, friction and wear phenomena and their dependence upon lubrication. Tribological studies on friction and wear processes are important because they lead to significant parameter-improvements of engineering tools and machinery components. A review of fundamental aspects of both friction and wear phenomena is presented. A number of radioindicator-based methods have been known for almost four decades, differing mainly with respect to the mode of introducing the radio-indicators into the machine part to be studied. All these methods briefly presented in this paper are based on the measurement of the activity of wear products and therefore require high activity levels of the part. For this reason, such determinations can be carried out only in special laboratories and under conditions which do not usually agree with the conditions of actual use. What is required is a sensitive, fast method allowing the determination of wear under any operating conditions, without the necessity of stopping and disassembling the machine. The above mentioned requirements are the features that have made the Thin Layer Activation technique (TLA) the most widely used method applied in wear and corrosion studies in the last two decades. The TLA principle, taking in account that wear and corrosion processes are characterised by a loss of material, consists in an ion beam irradiation of a well defined volume of a machine part subjected to wear. The radioactivity level changes can usually be measured by gamma-ray spectroscopy methods. A review of both main TLA fields of application in major laboratories abroad and of those performed at the U-120 cyclotron of I.P.N.E.-Bucharest together with the existing trends to extend other nuclear analytical methods to tribological studies is presented as well. (author). 25 refs., 6 figs., 2 tabs

  7. Method of sterilization

    International Nuclear Information System (INIS)

    Peel, J.L.; Waites, W.M.

    1981-01-01

    A method of sterilisation of food packaging is described which comprises treating microorganisms with an ultraviolet irradiated solution of hydrogen peroxide to render the microorganisms non-viable. The wavelength of ultraviolet radiation used is wholly or predominantly below 325 nm and the concentration of the hydrogen peroxide is no greater than 10% by weight. The method is applicable to a wide variety of microorganisms including moulds, yeasts, bacteria, viruses and protozoa and finds particular application in the destruction of spore-forming bacteria, especially those which are dairy contaminants. (U.K.)

  8. Electrorheological fluids and methods

    Science.gov (United States)

    Green, Peter F.; McIntyre, Ernest C.

    2015-06-02

    Electrorheological fluids and methods include changes in liquid-like materials that can flow like milk and subsequently form solid-like structures under applied electric fields; e.g., about 1 kV/mm. Such fluids can be used in various ways as smart suspensions, including uses in automotive, defense, and civil engineering applications. Electrorheological fluids and methods include one or more polar molecule substituted polyhedral silsesquioxanes (e.g., sulfonated polyhedral silsesquioxanes) and one or more oils (e.g., silicone oil), where the fluid can be subjected to an electric field.

  9. Carbon 14 dating method

    International Nuclear Information System (INIS)

    Fortin, Ph.

    2000-01-01

    This document gives a first introduction to 14 C dating as it is put into practice at the radiocarbon dating centre of Claude-Bernard university (Lyon-1 univ., Villeurbanne, France): general considerations and recalls of nuclear physics; the 14 C dating method; the initial standard activity; the isotopic fractioning; the measurement of samples activity; the liquid-scintillation counters; the calibration and correction of 14 C dates; the preparation of samples; the benzene synthesis; the current applications of the method. (J.S.)

  10. Methods for pretreating biomass

    Science.gov (United States)

    Balan, Venkatesh; Dale, Bruce E; Chundawat, Shishir; Sousa, Leonardo

    2017-05-09

    A method for pretreating biomass is provided, which includes, in a reactor, allowing gaseous ammonia to condense on the biomass and react with water present in the biomass to produce pretreated biomass, wherein reactivity of polysaccharides in the biomass is increased during subsequent biological conversion as compared to the reactivity of polysaccharides in biomass which has not been pretreated. A method for pretreating biomass with a liquid ammonia and recovering the liquid ammonia is also provided. Related systems which include a biochemical or biofuel production facility are also disclosed.

  11. Methods of Multivariate Analysis

    CERN Document Server

    Rencher, Alvin C

    2012-01-01

    Praise for the Second Edition "This book is a systematic, well-written, well-organized text on multivariate analysis packed with intuition and insight . . . There is much practical wisdom in this book that is hard to find elsewhere."-IIE Transactions Filled with new and timely content, Methods of Multivariate Analysis, Third Edition provides examples and exercises based on more than sixty real data sets from a wide variety of scientific fields. It takes a "methods" approach to the subject, placing an emphasis on how students and practitioners can employ multivariate analysis in real-life sit

  12. The SPH homogeneization method

    International Nuclear Information System (INIS)

    Kavenoky, Alain

    1978-01-01

    The homogeneization of a uniform lattice is a rather well understood topic while difficult problems arise if the lattice becomes irregular. The SPH homogeneization method is an attempt to generate homogeneized cross sections for an irregular lattice. Section 1 summarizes the treatment of an isolated cylindrical cell with an entering surface current (in one velocity theory); Section 2 is devoted to the extension of the SPH method to assembly problems. Finally Section 3 presents the generalisation to general multigroup problems. Numerical results are obtained for a PXR rod bundle assembly in Section 4

  13. Analogue computing methods

    CERN Document Server

    Welbourne, D

    1965-01-01

    Analogue Computing Methods presents the field of analogue computation and simulation in a compact and convenient form, providing an outline of models and analogues that have been produced to solve physical problems for the engineer and how to use and program the electronic analogue computer. This book consists of six chapters. The first chapter provides an introduction to analogue computation and discusses certain mathematical techniques. The electronic equipment of an analogue computer is covered in Chapter 2, while its use to solve simple problems, including the method of scaling is elaborat

  14. Tautomerism methods and theories

    CERN Document Server

    Antonov, Liudmil

    2013-01-01

    Covering the gap between basic textbooks and over-specialized scientific publications, this is the first reference available to describe this interdisciplinary topic for PhD students and scientists starting in the field. The result is an introductory description providing suitable practical examples of the basic methods used to study tautomeric processes, as well as the theories describing the tautomerism and proton transfer phenomena. It also includes different spectroscopic methods for examining tautomerism, such as UV-VIs, time-resolved fluorescence spectroscopy, and NMR spectrosc

  15. Unorthodox theoretical methods

    Energy Technology Data Exchange (ETDEWEB)

    Nedd, Sean [Iowa State Univ., Ames, IA (United States)

    2012-01-01

    The use of the ReaxFF force field to correlate with NMR mobilities of amine catalytic substituents on a mesoporous silica nanosphere surface is considered. The interfacing of the ReaxFF force field within the Surface Integrated Molecular Orbital/Molecular Mechanics (SIMOMM) method, in order to replicate earlier SIMOMM published data and to compare with the ReaxFF data, is discussed. The development of a new correlation consistent Composite Approach (ccCA) is presented, which incorporates the completely renormalized coupled cluster method with singles, doubles and non-iterative triples corrections towards the determination of heats of formations and reaction pathways which contain biradical species.

  16. Methodical ICT Project Management

    Directory of Open Access Journals (Sweden)

    Anna Kaczorowska

    2016-07-01

    Full Text Available The main aim of this publication is to provide the practitioners and theoreticians of project management with an indispensable insight into the offer of the best methods of ICT projects and their best adjustment to the organization's actual needs. The morphological analysis was used to construct the tool for evaluation of the needs and level of support offered by the ICT project management methods. The use of morphological matrix as a research tool allowed to carry out a comprehensive analysis of the needs within implementation of particular problem areas.

  17. Exploring Monte Carlo methods

    CERN Document Server

    Dunn, William L

    2012-01-01

    Exploring Monte Carlo Methods is a basic text that describes the numerical methods that have come to be known as "Monte Carlo." The book treats the subject generically through the first eight chapters and, thus, should be of use to anyone who wants to learn to use Monte Carlo. The next two chapters focus on applications in nuclear engineering, which are illustrative of uses in other fields. Five appendices are included, which provide useful information on probability distributions, general-purpose Monte Carlo codes for radiation transport, and other matters. The famous "Buffon's needle proble

  18. Practical methods of optimization

    CERN Document Server

    Fletcher, R

    2013-01-01

    Fully describes optimization methods that are currently most valuable in solving real-life problems. Since optimization has applications in almost every branch of science and technology, the text emphasizes their practical aspects in conjunction with the heuristics useful in making them perform more reliably and efficiently. To this end, it presents comparative numerical studies to give readers a feel for possibile applications and to illustrate the problems in assessing evidence. Also provides theoretical background which provides insights into how methods are derived. This edition offers rev

  19. Splines and variational methods

    CERN Document Server

    Prenter, P M

    2008-01-01

    One of the clearest available introductions to variational methods, this text requires only a minimal background in calculus and linear algebra. Its self-contained treatment explains the application of theoretic notions to the kinds of physical problems that engineers regularly encounter. The text's first half concerns approximation theoretic notions, exploring the theory and computation of one- and two-dimensional polynomial and other spline functions. Later chapters examine variational methods in the solution of operator equations, focusing on boundary value problems in one and two dimension

  20. METHOD OF ROLLING URANIUM

    Science.gov (United States)

    Smith, C.S.

    1959-08-01

    A method is described for rolling uranium metal at relatively low temperatures and under non-oxidizing conditions. The method involves the steps of heating the uranium to 200 deg C in an oil bath, withdrawing the uranium and permitting the oil to drain so that only a thin protective coating remains and rolling the oil coated uranium at a temperature of 200 deg C to give about a 15% reduction in thickness at each pass. The operation may be repeated to accomplish about a 90% reduction without edge cracking, checking or any appreciable increase in brittleness.

  1. Methods of visualizing graphs

    Science.gov (United States)

    Wong, Pak C.; Mackey, Patrick S.; Perrine, Kenneth A.; Foote, Harlan P.; Thomas, James J.

    2008-12-23

    Methods for visualizing a graph by automatically drawing elements of the graph as labels are disclosed. In one embodiment, the method comprises receiving node information and edge information from an input device and/or communication interface, constructing a graph layout based at least in part on that information, wherein the edges are automatically drawn as labels, and displaying the graph on a display device according to the graph layout. In some embodiments, the nodes are automatically drawn as labels instead of, or in addition to, the label-edges.

  2. Monte Carlo methods

    Directory of Open Access Journals (Sweden)

    Bardenet Rémi

    2013-07-01

    Full Text Available Bayesian inference often requires integrating some function with respect to a posterior distribution. Monte Carlo methods are sampling algorithms that allow to compute these integrals numerically when they are not analytically tractable. We review here the basic principles and the most common Monte Carlo algorithms, among which rejection sampling, importance sampling and Monte Carlo Markov chain (MCMC methods. We give intuition on the theoretical justification of the algorithms as well as practical advice, trying to relate both. We discuss the application of Monte Carlo in experimental physics, and point to landmarks in the literature for the curious reader.

  3. A flexible homework method

    Science.gov (United States)

    Bao, Lei; Stonebraker, Stephen R.; Sadaghiani, Homeyra

    2008-09-01

    The traditional methods of assigning and grading homework in large enrollment physics courses have raised concerns among many instructors and students. In this paper we discuss a cost-effective approach to managing homework that involves making half of the problem solutions available to students before the homework is due. In addition, students are allowed some control in choosing which problems to solve. This paper-based approach to homework provides more detailed and timely support to students and increases the amount of self-direction in the homework process. We describe the method and present preliminary results on how students have responded.

  4. Molecular methods for biofilms

    KAUST Repository

    Ferrera, Isabel

    2014-08-30

    This chapter deals with both classical and modern molecular methods that can be useful for the identification of microorganisms, elucidation and comparison of microbial communities, and investigation of their diversity and functions. The most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples; these are discussed in the first part. The second part provides an overview over DNA polymerase chain reaction (PCR) amplification and DNA sequencing methods. Protocols and analysis software as well as potential pitfalls associated with application of these methods are discussed. Community fingerprinting analyses that can be used to compare multiple microbial communities are discussed in the third part. This part focuses on Denaturing Gradient Gel Electrophoresis (DGGE), Terminal Restriction Fragment Length Polymorphism (T-RFLP) and Automated rRNA Intergenic Spacer Analysis (ARISA) methods. In addition, classical and next-generation metagenomics methods are presented. These are limited to bacterial artificial chromosome and Fosmid libraries and Sanger and next-generation 454 sequencing, as these methods are currently the most frequently used in research. Isolation of nucleic acids: This chapter discusses, the most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples. Nucleic acid isolation methods generally include three steps: cell lysis, removal of unwanted substances, and a final step of DNA purification and recovery. The first critical step is the cell lysis, which can be achieved by enzymatic or mechanical procedures. Removal of proteins, polysaccharides and other unwanted substances is likewise important to avoid their interference in subsequent analyses. Phenol-chloroform-isoamyl alcohol is commonly used to recover DNA, since it separates nucleic acids into an aqueous phase and precipitates proteins and

  5. Method to extract uranium

    International Nuclear Information System (INIS)

    Barreiro, A.J.; Hollemann, R.A.; Lyon, W.L.; Randell, C.C.

    1978-01-01

    The invented method to clean the commercial wet-method phosphoric acid - as pretreatment stage in the recovery of uranium - can be carried out at low capital and operational costs and requires little maintenance. In order to recover 0.2 g uranium which are contained in 1 litre of phosphoric acid solution obtained from the wet process, the solution is firstly largely cleared and cleaned. A cleaning agent, essentially of hydrocarbon with a boiling point between 150 and 300 0 C, reacts with the remaining slurry-forming impurities in the acid and enables these to be separated off in a solvent-extraction mixer separator with the slurry. Kerosine is used as cleaning agent in wet-process phosphoric acid with humus impurities. The same process can also be used with oxidation or reduction extraction separation methods to obtain uranium from industrial crude wet phosphoric acid solutions. Comparing a flow sheet each of a known method of separating uranium and the new one as according to the invention, one can see the attained simplification and probable cost reduction. (RW) [de

  6. PIES method of critique.

    Science.gov (United States)

    Baroletti, Steven; Szumita, Paul M

    2004-12-01

    Critical evaluation of clinical trials is essential prior to applying results into clinical practice. We have created the acronym, PIES (Population, Intervention, Endpoints, and Statistics) that encapsulates the four basic aspects of a trial. The PIES method creates a systematic approach to critically evaluating a trial, allowing practitioners to formulate opinions as to the applicability to clinical practice.

  7. R-matrix methods

    International Nuclear Information System (INIS)

    Robb, W.D.

    1978-01-01

    The procedures used in the application of R-matrix theory to atomic and molecular collision processes are presented. The computationally advantageous features of these methods are high-lighted, and some applications to electron scattering and photoionization are briefly discussed

  8. Method of signal analysis

    International Nuclear Information System (INIS)

    Berthomier, Charles

    1975-01-01

    A method capable of handling the amplitude and the frequency time laws of a certain kind of geophysical signals is described here. This method is based upon the analytical signal idea of Gabor and Ville, which is constructed either in the time domain by adding an imaginary part to the real signal (in-quadrature signal), or in the frequency domain by suppressing negative frequency components. The instantaneous frequency of the initial signal is then defined as the time derivative of the phase of the analytical signal, and his amplitude, or envelope, as the modulus of this complex signal. The method is applied to three types of magnetospheric signals: chorus, whistlers and pearls. The results obtained by analog and numerical calculations are compared to results obtained by classical systems using filters, i.e. based upon a different definition of the concept of frequency. The precision with which the frequency-time laws are determined leads then to the examination of the principle of the method and to a definition of instantaneous power density spectrum attached to the signal, and to the first consequences of this definition. In this way, a two-dimensional representation of the signal is introduced which is less deformed by the analysis system properties than the usual representation, and which moreover has the advantage of being obtainable practically in real time [fr

  9. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. ... limiting calories) usually isn’t enough to cause weight loss. But exercise plays an important part in helping ...

  10. METHOD OF CENTRIFUGE OPERATION

    Science.gov (United States)

    Cohen, K.

    1960-05-10

    A method of isotope separation is described in which two streams are flowed axially of, and countercurrently through, a cylindrical centrifuge bowl. Under the influence of a centrifugal field, the light fraction is concentrated in a stream flowing through the central portion of the bowl, whereas the heavy fraction is concentrated in a stream at the periphery thereof.

  11. Root production method system

    Science.gov (United States)

    Wayne Lovelace

    2002-01-01

    The RPM system (Root Production Method) is a multistep production system of container tree production that places primary emphasis on the root system because the root system ultimately determines the tree's survival and performance in its outplanted environment. This particular container production system has been developed to facilitate volume production, in a...

  12. Birth Control Methods

    Science.gov (United States)

    ... Women can choose from many different types of birth control methods. These include, in order of most effective to least effective at preventing pregnancy: Female and male sterilization (female tubal ligation or occlusion, male vasectomy) — Birth control that prevents pregnancy for the rest of ...

  13. Method of killing microorganisms

    International Nuclear Information System (INIS)

    Tensmeyer, L.G.

    1980-01-01

    A method of sterilizing the contents of containers involves exposure to a plasma induced therein by focusing a high-power laser beam in an electromagnetic field preferably for a period of from 1.0 millisec to 1.0 secs. (U.K.)

  14. Analysis of numerical methods

    CERN Document Server

    Isaacson, Eugene

    1994-01-01

    This excellent text for advanced undergraduates and graduate students covers norms, numerical solution of linear systems and matrix factoring, iterative solutions of nonlinear equations, eigenvalues and eigenvectors, polynomial approximation, and other topics. It offers a careful analysis and stresses techniques for developing new methods, plus many examples and problems. 1966 edition.

  15. gel template method

    Indian Academy of Sciences (India)

    TiO2 nanotubes have been synthesized by sol–gel template method using alumina membrane. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, UV absorption spectrum and X-ray diffraction techniques have been used to investigate the structure, morphology and optical ...

  16. HEV and cirrhosis: methods

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. HEV and cirrhosis: methods. Study group. Patients with cirrhosis and recent jaundice for <30 d. Controls. Patients with liver cirrhosis but no recent worsening. Exclusions. Significant alcohol consumption. Recent hepatotoxic drugs. Recent antiviral therapy. Recent ...

  17. Method for forming ammonia

    Science.gov (United States)

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  18. Biomass treatment method

    Science.gov (United States)

    Friend, Julie; Elander, Richard T.; Tucker, III; Melvin P.; Lyons, Robert C.

    2010-10-26

    A method for treating biomass was developed that uses an apparatus which moves a biomass and dilute aqueous ammonia mixture through reaction chambers without compaction. The apparatus moves the biomass using a non-compressing piston. The resulting treated biomass is saccharified to produce fermentable sugars.

  19. A method for sintering

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention provides a method for sintering, comprising in the following order the steps of: providing a body in the green state or in the pre-sintered state on a support; providing a load on at least one spacer on the support such that the load is located above said body in the green...

  20. communication method and apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    The present invention relates to a non-lingual communication method and apparatus, wherein a physical or physiological signal consciously created by a first subject (1) is detected and converted into a transmitted output signal presented to a second subject (7) in order to communicate information...

  1. Adhesive compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Sendijarevic, Vahid; O' Connor, James

    2017-12-05

    The present invention encompasses polyurethane adhesive compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane adhesives derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure:. In another aspect, the invention provides articles comprising the inventive polyurethane compositions as well as methods of making such compositions.

  2. Suzuki's Mother Tongue Method.

    Science.gov (United States)

    Kendall, John

    1986-01-01

    Suzuki believed that all human beings are endowed with remarkable musical ability and can learn to play musical instruments in the same way they learn to speak. The Suzuki method of teaching music and its evolution in the United States are discussed. (RM)

  3. Software specification methods

    CERN Document Server

    Habrias, Henri

    2010-01-01

    This title provides a clear overview of the main methods, and has a practical focus that allows the reader to apply their knowledge to real-life situations. The following are just some of the techniques covered: UML, Z, TLA+, SAZ, B, OMT, VHDL, Estelle, SDL and LOTOS.

  4. Materials and Methods

    African Journals Online (AJOL)

    David Norris

    Recent developments in statistical methods and computing algorithms especially for the inverted ... these studies could be partly attributed to the differences in the data structure (Rye & Mao, 1996; Misztal,. 1997). Accuracy ... The inverse relationship matrices, A-1 and D-1 were computed directly by algorithms described by.

  5. Modern Reduction Methods

    CERN Document Server

    Andersson, Pher G

    2008-01-01

    With its comprehensive overview of modern reduction methods, this book features high quality contributions allowing readers to find reliable solutions quickly and easily. The monograph treats the reduction of carbonyles, alkenes, imines and alkynes, as well as reductive aminations and cross and heck couplings, before finishing off with sections on kinetic resolutions and hydrogenolysis. An indispensable lab companion for every chemist.

  6. Material and methods

    African Journals Online (AJOL)

    Schalk Cloete

    This trend was confirmed by divergence in yearly averaged direct breeding values in the H and L lines. Expressed as percentage of the overall phenotypic mean for ... No selection on reproduction was thus directed at the current flock. .... and the number of the model fitted are provided in brackets (see Material and Methods).

  7. Validating dialect comparison methods

    NARCIS (Netherlands)

    Nerbonne, J.; Kleiweg, P.; Gaul, W; Ritter, G

    2002-01-01

    The range of dialectometric methods suggests the need for validation work. We propose a gold standard, based on the consensual classification of a well-studied area. Fidelity to the gold standard is assessed via matrix overlap measures (Rand and Fowlkes/Mallows). Word-based techniques in which

  8. Photovoltaic device and method

    Science.gov (United States)

    Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

    2015-01-27

    The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

  9. Sampling system and method

    Science.gov (United States)

    Decker, David L.; Lyles, Brad F.; Purcell, Richard G.; Hershey, Ronald Lee

    2013-04-16

    The present disclosure provides an apparatus and method for coupling conduit segments together. A first pump obtains a sample and transmits it through a first conduit to a reservoir accessible by a second pump. The second pump further conducts the sample from the reservoir through a second conduit.

  10. Research Methods in Sociolinguistics

    Science.gov (United States)

    Hernández-Campoy, Juan Manuel

    2014-01-01

    The development of Sociolinguistics has been qualitatively and quantitatively outstanding within Linguistic Science since its beginning in the 1950s, with a steady growth in both theoretical and methodological developments as well as in its interdisciplinary directions within the spectrum of language and society. Field methods in sociolinguistic…

  11. Ergonomics research methods

    Science.gov (United States)

    Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

    1973-01-01

    Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

  12. Method of photocatalytic nanotagging

    Science.gov (United States)

    Shelnutt, John A [Tijeras, NM; Medforth, Craig J [Winters, CA; Song, Yujiang [Albuquerque, NM

    2010-04-27

    A nanotagged chemical structure comprising a chemical structure with an associated photocatalyst and a tagging nanoparticle (a nanotag) grown in proximity to the photocatalyst, and a method for making the nanotagged chemical structure. The nanoparticle is grown in proximity to the photocatalyst by using a photocatalytic reduction reaction.

  13. Projecting the Scientific Method.

    Science.gov (United States)

    Uthe, R. E.

    2000-01-01

    Describes how the gas laws are an excellent vehicle for introducing the steps of the scientific method. Students can use balloons and a simple apparatus to observe changes in various gas parameters, develop ideas about the changes they see, collect numerical data, test their ideas, derive simple equations for the relationships, and use the…

  14. Ferrari's Method and Technology

    Science.gov (United States)

    Althoen, Steve

    2005-01-01

    Some tips that combine knowledge of mathematics history and technology for adapting Ferrar's method to factor quintics with a TI-83 graphing calculator are presented. A demonstration on the use of the root finder and regression capabilities of the graphing calculator are presented, so that the tips can be easily adapted for any graphing calculator…

  15. Teaching Materials and Methods.

    Science.gov (United States)

    Physiologist, 1987

    1987-01-01

    Contains abstracts of presented papers which deal with teaching materials and methods in physiology. Includes papers on preconceptual notions in physiology, somatosensory activity recorded in the dorsal root ganglion of the bull frog, and the use of the Apple Macintosh microcomputer in teaching human anatomy and physiology. (TW)

  16. Interval methods: An introduction

    DEFF Research Database (Denmark)

    Achenie, L.E.K.; Kreinovich, V.; Madsen, Kaj

    2006-01-01

    This chapter contains selected papers presented at the Minisymposium on Interval Methods of the PARA'04 Workshop '' State-of-the-Art in Scientific Computing ''. The emphasis of the workshop was on high-performance computing (HPC). The ongoing development of ever more advanced computers provides...

  17. Numerical Methods in Linguistics

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 1. Numerical Methods in Linguistics - An Introduction to Glottochronology. Raamesh Gowri Raghavan. General Article Volume 10 Issue 1 January 2005 pp 17-24. Fulltext. Click here to view fulltext PDF. Permanent link:

  18. Nonhazardous Urine Pretreatment Method

    Science.gov (United States)

    Akse, James R.; Holtsnider, John T.

    2012-01-01

    A method combines solid phase acidification with two non-toxic biocides to prevent ammonia volatilization and microbial proliferation. The safe, non-oxidizing biocide combination consists of a quaternary amine and a food preservative. This combination has exhibited excellent stabilization of both acidified and unacidified urine. During pretreatment tests, composite urine collected from donors was challenged with a microorganism known to proliferate in urine, and then was processed using the nonhazardous urine pre-treatment method. The challenge microorganisms included Escherichia coli, a common gram-negative bacteria; Enterococcus faecalis, a ureolytic gram-positive bacteria; Candida albicans, a yeast commonly found in urine; and Aspergillus niger, a problematic mold that resists urine pre-treatment. Urine processed in this manner remained microbially stable for over 57 days. Such effective urine stabilization was achieved using non-toxic, non-oxidizing biocides at higher pH (3.6 to 5.8) than previous methods in use or projected for use aboard the International Space Station (ISS). ISS urine pretreatment methods employ strong oxidants including ozone and hexavalent chromium (Cr(VI)), a carcinogenic material, under very acidic conditions (pH = 1.8 to 2.4). The method described here offers a much more benign chemical environment than previous pretreatment methods, and will lower equivalent system mass (ESM) by reducing containment volume and mass, system complexity, and crew time needed to handle pre-treatment chemicals. The biocides, being non-oxidizing, minimize the potential for chemical reactions with urine constituents to produce volatile, airborne contaminants such as cyanogen chloride. Additionally, the biocides are active under significantly less acidic conditions than those used in the current system, thereby reducing the degree of required acidification. A simple flow-through solid phase acidification (SPA) bed is employed to overcome the natural buffering

  19. THE ACTION RESEARCH METHOD

    Directory of Open Access Journals (Sweden)

    Petre GEORGIEVSKI

    1999-05-01

    Full Text Available The effort in this work to elaborate an action research method as a central research problem considering the recent contemporary sociological and educa­tional literature. The author begins with the statement that the method is a complex notion, composed of three main components: approach to the research problem, data gathering procedures and data analysis procedures. This point of view is further applied and elaborated in the author's text, emphasizing the action research characteristics: interruption with the positive tradition in social research and the divided of the objective and subjective, application of the qualitative data. The sub­stantial difference between the action research in regard with the other kinds of research, is not only in getting to new knowledge's, but also in problem solving or a change in the situation in a concrete social context.

  20. Developments in Surrogating Methods

    Directory of Open Access Journals (Sweden)

    Hans van Dormolen

    2005-11-01

    Full Text Available In this paper, I would like to talk about the developments in surrogating methods for preservation. My main focus will be on the technical aspects of preservation surrogates. This means that I will tell you something about my job as Quality Manager Microfilming for the Netherlands’ national preservation program, Metamorfoze, which is coordinated by the National Library. I am responsible for the quality of the preservation microfilms, which are produced for Metamorfoze. Firstly, I will elaborate on developments in preservation methods in relation to the following subjects: · Preservation microfilms · Scanning of preservation microfilms · Preservation scanning · Computer Output Microfilm. In the closing paragraphs of this paper, I would like to tell you something about the methylene blue test. This is an important test for long-term storage of preservation microfilms. Also, I will give you a brief report on the Cellulose Acetate Microfilm Conference that was held in the British Library in London, May 2005.

  1. Computer intensive statistical methods

    Science.gov (United States)

    Yakowitz, S.

    The special session “Computer-Intensive Statistical Methods” was held in morning and afternoon parts at the 1985 AGU Fall Meeting in San Francisco. Calif. Its mission was to provide a forum for hydrologists and statisticians who are active in bringing unconventional, algorithmic-oriented statistical techniques to bear on problems of hydrology. Statistician Emanuel Parzen (Texas A&M University, College Station, Tex.) opened the session by relating recent developments in quantile estimation methods and showing how properties of such methods can be used to advantage to categorize runoff data previously analyzed by I. Rodriguez-Iturbe (Universidad Simon Bolivar, Caracas, Venezuela). Statistician Eugene Schuster (University of Texas, El Paso) discussed recent developments in nonparametric density estimation which enlarge the framework for convenient incorporation of prior and ancillary information. These extensions were motivated by peak annual flow analysis. Mathematician D. Myers (University of Arizona, Tucson) gave a brief overview of “kriging” and outlined some recently developed methodology.

  2. Embodied Design Ideation methods

    DEFF Research Database (Denmark)

    Wilde, Danielle; Vallgårda, Anna; Tomico, Oscar

    2017-01-01

    Embodied design ideation practices work with relationships between body, material and context to enliven design and research potential. Methods are often idiosyncratic and – due to their physical nature – not easily transferred. This presents challenges for designers wishing to develop and share...... techniques or contribute to research. We present a framework that enables designers to understand, describe and contextualise their embodied design ideation practices in ways that can be understood by peers, as well as those new to embodied ideation. Our framework – developed over two conference workshops...... – provides a frame for discussion of embodied design actions that leverage the power of estrangement. We apply our framework to eight embodied design ideation methods. Our contribution is thus twofold: (1) a framework to understand and leverage the power of estrangement in embodied design ideation, and (2...

  3. Semiconductor testing method

    International Nuclear Information System (INIS)

    Brown, Stephen.

    1992-01-01

    In a method of avoiding use of nuclear radiation, eg gamma rays, X-rays, electron beams, for testing semiconductor components for resistance to hard radiation, which hard radiation causes data corruption in some memory devices and 'latch-up' in others, similar fault effects can be achieved using a xenon or other 'light' flash gun even though the penetration of light is significantly less than that of gamma rays. The method involves treating a device with gamma radiation, measuring a particular fault current at the onset of a fault event, repeating the test with light to confirm the occurrence of the fault event at the same measured fault current, and using the fault current value as a reference for future tests using light on similar devices. (author)

  4. Biological tracer method

    Science.gov (United States)

    Strong-Gunderson, Janet M.; Palumbo, Anthony V.

    1998-01-01

    The present invention is a biological tracer method for characterizing the movement of a material through a medium, comprising the steps of: introducing a biological tracer comprising a microorganism having ice nucleating activity into a medium; collecting at least one sample of the medium from a point removed from the introduction point; and analyzing the sample for the presence of the biological tracer. The present invention is also a method for using a biological tracer as a label for material identification by introducing a biological tracer having ice nucleating activity into a material, collecting a sample of a portion of the labelled material and analyzing the sample for the presence of the biological tracer.

  5. The Montessori Method

    Directory of Open Access Journals (Sweden)

    Cathleen HASKINS

    2010-12-01

    Full Text Available Dr. Maria Montessori provided the world with a powerful philosophy and practice for the advancement of humanity: change how we educate children and we change the world. She understood two things very clearly: One, that we can build a better world, a more just and peaceful place, when we educate for the realization of the individual and collective human potential; and two, that the only way to create an educational system that will that will serve this end is to scrap the current system entirely and replace it with a completely new system. She gave us a system through which to accomplish that goal: The Montessori Method. The following is a personal and professional account of the Montessori Method of educating children.

  6. The random projection method

    CERN Document Server

    Vempala, Santosh S

    2005-01-01

    Random projection is a simple geometric technique for reducing the dimensionality of a set of points in Euclidean space while preserving pairwise distances approximately. The technique plays a key role in several breakthrough developments in the field of algorithms. In other cases, it provides elegant alternative proofs. The book begins with an elementary description of the technique and its basic properties. Then it develops the method in the context of applications, which are divided into three groups. The first group consists of combinatorial optimization problems such as maxcut, graph coloring, minimum multicut, graph bandwidth and VLSI layout. Presented in this context is the theory of Euclidean embeddings of graphs. The next group is machine learning problems, specifically, learning intersections of halfspaces and learning large margin hypotheses. The projection method is further refined for the latter application. The last set consists of problems inspired by information retrieval, namely, nearest neig...

  7. Motor degradation prediction methods

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, J.R.; Kelly, J.F.; Delzingaro, M.J.

    1996-12-01

    Motor Operated Valve (MOV) squirrel cage AC motor rotors are susceptible to degradation under certain conditions. Premature failure can result due to high humidity/temperature environments, high running load conditions, extended periods at locked rotor conditions (i.e. > 15 seconds) or exceeding the motor`s duty cycle by frequent starts or multiple valve stroking. Exposure to high heat and moisture due to packing leaks, pressure seal ring leakage or other causes can significantly accelerate the degradation. ComEd and Liberty Technologies have worked together to provide and validate a non-intrusive method using motor power diagnostics to evaluate MOV rotor condition and predict failure. These techniques have provided a quick, low radiation dose method to evaluate inaccessible motors, identify degradation and allow scheduled replacement of motors prior to catastrophic failures.

  8. Ion sensing method

    Science.gov (United States)

    Smith, Richard Harding; Martin, Glenn Brian

    2004-05-18

    The present invention allows the determination of trace levels of ionic substances in a sample solution (ions, metal ions, and other electrically charged molecules) by coupling a separation method, such as liquid chromatography, with ion selective electrodes (ISE) prepared so as to allow detection at activities below 10.sup.-6 M. The separation method distributes constituent molecules into fractions due to unique chemical and physical properties, such as charge, hydrophobicity, specific binding interactions, or movement in an electrical field. The separated fractions are detected by means of the ISE(s). These ISEs can be used singly or in an array. Accordingly, modifications in the ISEs are used to permit detection of low activities, specifically, below 10.sup.-6 M, by using low activities of the primary analyte (the molecular species which is specifically detected) in the inner filling solution of the ISE. Arrays constructed in various ways allow flow-through sensing for multiple ions.

  9. Motor degradation prediction methods

    International Nuclear Information System (INIS)

    Arnold, J.R.; Kelly, J.F.; Delzingaro, M.J.

    1996-01-01

    Motor Operated Valve (MOV) squirrel cage AC motor rotors are susceptible to degradation under certain conditions. Premature failure can result due to high humidity/temperature environments, high running load conditions, extended periods at locked rotor conditions (i.e. > 15 seconds) or exceeding the motor's duty cycle by frequent starts or multiple valve stroking. Exposure to high heat and moisture due to packing leaks, pressure seal ring leakage or other causes can significantly accelerate the degradation. ComEd and Liberty Technologies have worked together to provide and validate a non-intrusive method using motor power diagnostics to evaluate MOV rotor condition and predict failure. These techniques have provided a quick, low radiation dose method to evaluate inaccessible motors, identify degradation and allow scheduled replacement of motors prior to catastrophic failures

  10. Cross-impact method

    Directory of Open Access Journals (Sweden)

    Suzić Nenad

    2014-01-01

    Full Text Available The paper displays the application of the Cross-Impact method in pedagogy, namely a methodological approach which crosses variables in a novel, but statistically justified manner. The method is an innovation in pedagogy as well as in research methodology of social and psychological phenomena. Specifically, events and processes are crossed, that is, experts' predictions of about future interaction of events and processes. Therefore, this methodology is futuristic; it concerns predicting future, which is of key importance for pedagogic objectives. The paper presents two instances of the cross-impact approach: the longer, displayed in fourteen steps, and the shorter, in four steps. They are both accompanied with mathematic and statistical formulae allowing for quantification, that is, a numerical expression of the probability of a certain event happening in the future. The advantage of this approach is that it facilitates planning in education which so far has been solely based on lay estimates and assumptions.

  11. INNOVATIVE SALES METHODS

    Directory of Open Access Journals (Sweden)

    Roxana L. IONESCU

    2014-06-01

    Full Text Available Companies operating in a global economy that is constantly changing and developming, especially during the financial crisis and political instability. It is necessary to adapt and develop sales methods in such environment. For large companies who base their activity on sales it has become a necessity to learn different types of sales approaches because their knowledge enables them to grow the number of customers and therefore the sales and the turnover. This paper aims to exame the most effective sales methods used on the highly sensitive economic and social environment – the insurance market. In the field of insurances, the sales process is even more important because sellers need to sell an intangible product that may materialize in the future, but there is no certainty.

  12. Monte Carlo methods

    CERN Document Server

    Kalos, Melvin H

    2008-01-01

    This introduction to Monte Carlo methods seeks to identify and study the unifying elements that underlie their effective application. Initial chapters provide a short treatment of the probability and statistics needed as background, enabling those without experience in Monte Carlo techniques to apply these ideas to their research.The book focuses on two basic themes: The first is the importance of random walks as they occur both in natural stochastic systems and in their relationship to integral and differential equations. The second theme is that of variance reduction in general and importance sampling in particular as a technique for efficient use of the methods. Random walks are introduced with an elementary example in which the modeling of radiation transport arises directly from a schematic probabilistic description of the interaction of radiation with matter. Building on this example, the relationship between random walks and integral equations is outlined

  13. Mathematical Methods for Physicists

    Science.gov (United States)

    Chow, Tai L.

    2000-07-01

    Preface; 1. Vector and tensor analysis; 2. Ordinary differential equations; 3. Matrix algebra; 4. Fourier series and integrals; 5. Linear vector spaces; 6. Functions of a complex variable; 7. Special functions of mathematical physics; 8. The calculus of variations; 9. The Laplace transformation; 10. Partial differential equations; 11. Simple linear integral equations; 12. Elements of group theory; 13. Numerical methods; 14. Introduction to probability theory; Appendices; Further reading; Index.

  14. Polymer compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Willkomm, Wayne R.

    2018-02-06

    The present invention encompasses polyurethane compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane foams, thermoplastics and elastomers derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure: ##STR00001## In another aspect, the invention provides articles comprising the inventive foam and elastomer compositions as well as methods of making such compositions.

  15. Methods of risk assessment

    International Nuclear Information System (INIS)

    Jones, D.R.

    1981-01-01

    The subject is discussed under the headings: introduction (identification, quantification of risk); some approaches to risk evaluation (use of the 'no risk' principle; the 'acceptable risk' method; risk balancing; comparison of risks, benefits and other costs); cost benefit analysis; an alternative approach (tabulation and display; description and reduction of the data table); identification of potential decision sets consistent with the constraints. Some references are made to nuclear power. (U.K.)

  16. METHODS OF CONTENTS CURATOR

    Directory of Open Access Journals (Sweden)

    V. Kukharenko

    2013-03-01

    Full Text Available Content curated - a new activity (started in 2008 qualified network users with process large amounts of information to represent her social network users. To prepare content curators developed 7 weeks distance course, which examines the functions, methods and tools curator. Courses showed a significant relationship success learning on the availability of advanced personal learning environment and the ability to process and analyze information.

  17. Method for making nanomaterials

    Science.gov (United States)

    Fan, Hongyou; Wu, Huimeng

    2013-06-04

    A method of making a nanostructure by preparing a face centered cubic-ordered metal nanoparticle film from metal nanoparticles, such as gold and silver nanoparticles, exerting a hydrostatic pressure upon the film at pressures of several gigapascals, followed by applying a non-hydrostatic stress perpendicularly at a pressure greater than approximately 10 GPA to form an array of nanowires with individual nanowires having a relatively uniform length, average diameter and density.

  18. Situational method engineering

    CERN Document Server

    Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

    2014-01-01

    While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

  19. Method for scavenging mercury

    Science.gov (United States)

    Chang, Shih-ger [El Cerrito, CA; Liu, Shou-heng [Kaohsiung, TW; Liu, Zhao-rong [Beijing, CN; Yan, Naiqiang [Berkeley, CA

    2009-01-20

    Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting of flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

  20. Polymer compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Willkomm, Wayne R.

    2016-09-27

    The present invention encompasses polyurethane compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane foams, thermoplastics and elastomers derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure: ##STR00001## In another aspect, the invention provides articles comprising the inventive foam and elastomer compositions as well as methods of making such compositions.

  1. METHOD FOR TESTING COATINGS

    Science.gov (United States)

    Johns, I.B.; Newton, A.S.

    1958-09-01

    A method is described for detecting pin hole imperfections in coatings on uranium-metal objects. Such coated objects are contacted with a heated atmosphere of gaseous hydrogen and imperfections present in the coatings will allow the uranlum to react with the hydrogen to form uranium hydride. Since uranium hydride is less dense than uranium metal it will swell, causing enlargement of the coating defeot and rendering it visible.

  2. Methods of celestial mechanics

    CERN Document Server

    Brouwer, Dirk

    2013-01-01

    Methods of Celestial Mechanics provides a comprehensive background of celestial mechanics for practical applications. Celestial mechanics is the branch of astronomy that is devoted to the motions of celestial bodies. This book is composed of 17 chapters, and begins with the concept of elliptic motion and its expansion. The subsequent chapters are devoted to other aspects of celestial mechanics, including gravity, numerical integration of orbit, stellar aberration, lunar theory, and celestial coordinates. Considerable chapters explore the principles and application of various mathematical metho

  3. Multigrid methods III

    CERN Document Server

    Trottenberg, U; Third European Conference on Multigrid Methods

    1991-01-01

    These proceedings contain a selection of papers presented at the Third European Conference on Multigrid Methods which was held in Bonn on October 1-4, 1990. Following conferences in 1981 and 1985, a platform for the presentation of new Multigrid results was provided for a third time. Multigrid methods no longer have problems being accepted by numerical analysts and users of numerical methods; on the contrary, they have been further developed in such a successful way that they have penetrated a variety of new fields of application. The high number of 154 participants from 18 countries and 76 presented papers show the need to continue the series of the European Multigrid Conferences. The papers of this volume give a survey on the current Multigrid situation; in particular, they correspond to those fields where new developments can be observed. For example, se­ veral papers study the appropriate treatment of time dependent problems. Improvements can also be noticed in the Multigrid approach for semiconductor eq...

  4. Materials and test methods

    International Nuclear Information System (INIS)

    Kase, M.B.

    1985-01-01

    The objective of this study was to provide, in cooperation with ORNL and LANL, specimens required for studies to develop organic insulators having the cryogenic neutron irradiation resistance required for MFE systems utilizing superconducting magnetic confinement. To develop test methods and analytical procedures for assessing radiation damage. To stimulate and participate in international cooperation directed toward accomplishing these objectives. The system for producing uniaxially reinforced, 3-4 mm (0.125 in) diameter rod specimens has been refined and validated by production of excellent quality specimens using liquid-mix epoxy resin systems. The methodology is undergoing further modification to permit use of hot-melt epoxy and polyimide resin systems as will be required for the experimental program to be conducted in the NLTNIF reactor at ORNL. Preliminary studies indicate that short beam and torsional shear test methods will be useful in evaluating radiation degradation. Development of these and other applicable test methods are continuing. A cooperative program established with laboratories in Japan and in England has resulted in the production and testing of specimens having an identical configuration

  5. Stochastic Methods in Biology

    CERN Document Server

    Kallianpur, Gopinath; Hida, Takeyuki

    1987-01-01

    The use of probabilistic methods in the biological sciences has been so well established by now that mathematical biology is regarded by many as a distinct dis­ cipline with its own repertoire of techniques. The purpose of the Workshop on sto­ chastic methods in biology held at Nagoya University during the week of July 8-12, 1985, was to enable biologists and probabilists from Japan and the U. S. to discuss the latest developments in their respective fields and to exchange ideas on the ap­ plicability of the more recent developments in stochastic process theory to problems in biology. Eighteen papers were presented at the Workshop and have been grouped under the following headings: I. Population genetics (five papers) II. Measure valued diffusion processes related to population genetics (three papers) III. Neurophysiology (two papers) IV. Fluctuation in living cells (two papers) V. Mathematical methods related to other problems in biology, epidemiology, population dynamics, etc. (six papers) An important f...

  6. Development of partitioning method

    International Nuclear Information System (INIS)

    Kubota, Kazuo; Dojiri, Shigeru; Kubota, Masumitsu

    1988-10-01

    The literature survey was carried out on the amount of natural resources, behaviors in reprocessing process and in separation and recovery methods of the platinum group elements and technetium which are contained in spent fuel. The essential results are described below. (1) The platinum group elements, which are contained in spent fuel, are quantitatively limited, compared with total demand for them in Japan. And estimated separation and recovery cost is rather high. In spite of that, development of these techniques is considered to be very important because the supply of these elements is almost from foreign resources in Japan. (2) For recovery of these elements, studies of recovery from undisolved residue and from high level liquid waste (HLLW) also seem to be required. (3) As separation and recovery methods, following techniques are considered to be effective; lead extraction, liquid metal extraction, solvent extraction, ion-exchange, adsorption, precipitation, distillation, electrolysis or their combination. (4) But each of these methods has both advantages and disadvantages. So development of such processes largely depends on future works. (author) 94 refs

  7. Tracers and tracing methods

    International Nuclear Information System (INIS)

    Leclerc, J.P.

    2001-01-01

    The first international congress on 'Tracers and tracing methods' took place in Nancy in May 2001. The objective of this second congress was to present the current status and trends on tracing methods and their applications. It has given the opportunity to people from different fields to exchange scientific information and knowledge about tracer methodologies and applications. The target participants were the researchers, engineers and technologists of various industrial and research sectors: chemical engineering, environment, food engineering, bio-engineering, geology, hydrology, civil engineering, iron and steel production... Two sessions have been planned to cover both fundamental and industrial aspects: 1)fundamental development (tomography, tracer camera visualization and particles tracking; validation of computational fluid dynamics simulations by tracer experiments and numerical residence time distribution; new tracers and detectors or improvement and development of existing tracing methods; data treatments and modeling; reactive tracer experiments and interpretation) 2)industrial applications (geology, hydrogeology and oil field applications; civil engineering, mineral engineering and metallurgy applications; chemical engineering; environment; food engineering and bio-engineering). The program included 5 plenary lectures, 23 oral communications and around 50 posters. Only 9 presentations are interested for the INIS database

  8. Method Engineering: Engineering of Information Systems Development Methods and Tools

    NARCIS (Netherlands)

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

  9. The data embedding method

    Energy Technology Data Exchange (ETDEWEB)

    Sandford, M.T. II; Bradley, J.N.; Handel, T.G.

    1996-06-01

    Data embedding is a new steganographic method for combining digital information sets. This paper describes the data embedding method and gives examples of its application using software written in the C-programming language. Sandford and Handel produced a computer program (BMPEMBED, Ver. 1.51 written for IBM PC/AT or compatible, MS/DOS Ver. 3.3 or later) that implements data embedding in an application for digital imagery. Information is embedded into, and extracted from, Truecolor or color-pallet images in Microsoft{reg_sign} bitmap (.BMP) format. Hiding data in the noise component of a host, by means of an algorithm that modifies or replaces the noise bits, is termed {open_quote}steganography.{close_quote} Data embedding differs markedly from conventional steganography, because it uses the noise component of the host to insert information with few or no modifications to the host data values or their statistical properties. Consequently, the entropy of the host data is affected little by using data embedding to add information. The data embedding method applies to host data compressed with transform, or {open_quote}lossy{close_quote} compression algorithms, as for example ones based on discrete cosine transform and wavelet functions. Analysis of the host noise generates a key required for embedding and extracting the auxiliary data from the combined data. The key is stored easily in the combined data. Images without the key cannot be processed to extract the embedded information. To provide security for the embedded data, one can remove the key from the combined data and manage it separately. The image key can be encrypted and stored in the combined data or transmitted separately as a ciphertext much smaller in size than the embedded data. The key size is typically ten to one-hundred bytes, and it is in data an analysis algorithm.

  10. Method through motion

    DEFF Research Database (Denmark)

    Steijn, Arthur

    2016-01-01

    context, I have been conducting a practice-led research project. Central to the project is construction of a design model describing sets of procedures, concepts and terminology relevant for design and studies of motion graphics in spatial contexts. The focus of this paper is the role of model...... construction as a support to working systematically practice-led research project. The design model is being developed through design laboratories and workshops with students and professionals who provide feedback that lead to incremental improvements. Working with this model construction-as-method reveals...

  11. Mathematical methods for physicists

    CERN Document Server

    Arfken, George B

    1985-01-01

    Mathematical Methods for Physicists, Third Edition provides an advanced undergraduate and beginning graduate study in physical science, focusing on the mathematics of theoretical physics. This edition includes sections on the non-Cartesian tensors, dispersion theory, first-order differential equations, numerical application of Chebyshev polynomials, the fast Fourier transform, and transfer functions. Many of the physical examples provided in this book, which are used to illustrate the applications of mathematics, are taken from the fields of electromagnetic theory and quantum mechanics. The He

  12. Electrical estimating methods

    CERN Document Server

    Del Pico, Wayne J

    2014-01-01

    Simplify the estimating process with the latest data, materials, and practices Electrical Estimating Methods, Fourth Edition is a comprehensive guide to estimating electrical costs, with data provided by leading construction database RS Means. The book covers the materials and processes encountered by the modern contractor, and provides all the information professionals need to make the most precise estimate. The fourth edition has been updated to reflect the changing materials, techniques, and practices in the field, and provides the most recent Means cost data available. The complexity of el

  13. Epitope prediction methods

    DEFF Research Database (Denmark)

    Karosiene, Edita

    on machine learning techniques. Several MHC class I binding prediction algorithms have been developed and due to their high accuracy they are used by many immunologists to facilitate the conventional experimental process of epitope discovery. However, the accuracy of these methods depends on data defining...... the NetMHCIIpan-3.0 predictor based on artificial neural networks, which is capable of giving binding affinities to any human MHC class II molecule. Chapter 4 of this thesis gives an overview of bioinformatics tools developed by the Immunological Bioinformatics group at Center for Biological Sequence...

  14. Methods of mathematical optimization

    Science.gov (United States)

    Vanderplaats, G. N.

    The fundamental principles of numerical optimization methods are reviewed, with an emphasis on potential engineering applications. The basic optimization process is described; unconstrained and constrained minimization problems are defined; a general approach to the design of optimization software programs is outlined; and drawings and diagrams are shown for examples involving (1) the conceptual design of an aircraft, (2) the aerodynamic optimization of an airfoil, (3) the design of an automotive-engine connecting rod, and (4) the optimization of a 'ski-jump' to assist aircraft in taking off from a very short ship deck.

  15. Recurrent fuzzy ranking methods

    Science.gov (United States)

    Hajjari, Tayebeh

    2012-11-01

    With the increasing development of fuzzy set theory in various scientific fields and the need to compare fuzzy numbers in different areas. Therefore, Ranking of fuzzy numbers plays a very important role in linguistic decision-making, engineering, business and some other fuzzy application systems. Several strategies have been proposed for ranking of fuzzy numbers. Each of these techniques has been shown to produce non-intuitive results in certain case. In this paper, we reviewed some recent ranking methods, which will be useful for the researchers who are interested in this area.

  16. Geometrical method of decoupling

    Directory of Open Access Journals (Sweden)

    C. Baumgarten

    2012-12-01

    Full Text Available The computation of tunes and matched beam distributions are essential steps in the analysis of circular accelerators. If certain symmetries—like midplane symmetry—are present, then it is possible to treat the betatron motion in the horizontal, the vertical plane, and (under certain circumstances the longitudinal motion separately using the well-known Courant-Snyder theory, or to apply transformations that have been described previously as, for instance, the method of Teng and Edwards. In a preceding paper, it has been shown that this method requires a modification for the treatment of isochronous cyclotrons with non-negligible space charge forces. Unfortunately, the modification was numerically not as stable as desired and it was still unclear, if the extension would work for all conceivable cases. Hence, a systematic derivation of a more general treatment seemed advisable. In a second paper, the author suggested the use of real Dirac matrices as basic tools for coupled linear optics and gave a straightforward recipe to decouple positive definite Hamiltonians with imaginary eigenvalues. In this article this method is generalized and simplified in order to formulate a straightforward method to decouple Hamiltonian matrices with eigenvalues on the real and the imaginary axis. The decoupling of symplectic matrices which are exponentials of such Hamiltonian matrices can be deduced from this in a few steps. It is shown that this algebraic decoupling is closely related to a geometric “decoupling” by the orthogonalization of the vectors E[over →], B[over →], and P[over →], which were introduced with the so-called “electromechanical equivalence.” A mathematical analysis of the problem can be traced down to the task of finding a structure-preserving block diagonalization of symplectic or Hamiltonian matrices. Structure preservation means in this context that the (sequence of transformations must be symplectic and hence canonical. When

  17. Maximum entropy methods

    International Nuclear Information System (INIS)

    Ponman, T.J.

    1984-01-01

    For some years now two different expressions have been in use for maximum entropy image restoration and there has been some controversy over which one is appropriate for a given problem. Here two further entropies are presented and it is argued that there is no single correct algorithm. The properties of the four different methods are compared using simple 1D simulations with a view to showing how they can be used together to gain as much information as possible about the original object. (orig.)

  18. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  19. Methods of materiality

    DEFF Research Database (Denmark)

    Aagaard, Jesper; Matthiesen, Noomi Christine Linde

    2016-01-01

    that researchers should start paying attention to the material world (consisting of both human bodies and material objects) and what it means for how people live their lives. It is argued that this can be done by incorporating the concept of material presence to capture embodied and material layers of existence......, and the method of participant observation is suggested as a viable approach to achieve this end. An empirical example of how authority is produced in a parent-teacher conference, not only through language but also through material objects and embodied being, is then presented. The article concludes by suggesting...... practical guidelines for incorporating attention to materiality in qualitative research....

  20. Methods of statistical physics

    CERN Document Server

    Akhiezer, Aleksandr I

    1981-01-01

    Methods of Statistical Physics is an exposition of the tools of statistical mechanics, which evaluates the kinetic equations of classical and quantized systems. The book also analyzes the equations of macroscopic physics, such as the equations of hydrodynamics for normal and superfluid liquids and macroscopic electrodynamics. The text gives particular attention to the study of quantum systems. This study begins with a discussion of problems of quantum statistics with a detailed description of the basics of quantum mechanics along with the theory of measurement. An analysis of the asymptotic be

  1. Radioanalytical methods manual

    International Nuclear Information System (INIS)

    Chiu, N.W.; Dean, J.R.

    1986-01-01

    This Radioanalytical Methods manual is comprised of 12 chapters. It includes a review of the pertinent literature up to the end of 1982 pertaining to the measurement of the radioactive species listed under the terms of the contract. Included is methodology recommended for the decompositions of soils, tailings, ores, biological samples and air filters. Detailed analytical methodology for the measurement of gross alpha, gross beta, gross gamma, uranium, radium-226, radium-228, lead-210, thorium-232, thorium-230, thorium-228, total thorium, radon-222, radon-220 and radon-219 is presented

  2. Methods of thermodynamics

    CERN Document Server

    Reiss, Howard

    1997-01-01

    Since there is no shortage of excellent general books on elementary thermodynamics, this book takes a different approach, focusing attention on the problem areas of understanding of concept and especially on the overwhelming but usually hidden role of ""constraints"" in thermodynamics, as well as on the lucid exposition of the significance, construction, and use (in the case of arbitrary systems) of the thermodynamic potential. It will be especially useful as an auxiliary text to be used along with any standard treatment.Unlike some texts, Methods of Thermodynamics does not use statistical m

  3. [Snoring analysis methods].

    Science.gov (United States)

    Fiz Fernández, José Antonio; Solà Soler, Jordi; Jané Campos, Raimon

    2011-06-11

    Snore is a breathing sound that is originated during sleep, either nocturnal or diurnal. Snoring may be inspiratory, expiratory or it may occupy the whole breathing cycle. It is caused by the vibrations of the different tissues of the upper airway. Many procedures have been used to analyze it, from simple interrogation, to standardized questionnaires, to more sophisticated acoustic methods developed thanks to the advance of biomedical techniques in the last years. The present work describes the current state of the art of snoring analysis procedures. Copyright © 2010 Elsevier España, S.L. All rights reserved.

  4. Formal Methods in Industry

    Directory of Open Access Journals (Sweden)

    Alexei Serna A.

    2012-12-01

    Full Text Available The application of formal methods in industry has progressed extensively over the past decade and the results are promising. But despite these achievements and it have been documented in numerous studies, it is still very common the skepticism about its usefulness and applicability. The goal of this paper is to show that its evolution over the past decade exceeds all previous processes and each time they do a better job to satisfy industrial needs. This is achieved by the description of some experiments and the result of various applications in industry and through an analyzing of the needs of companies that must be satisfy the research community in this field.

  5. Methods of graded rings

    CERN Document Server

    Nastasescu, Constantin

    2004-01-01

    The topic of this book, graded algebra, has developed in the past decade to a vast subject with new applications in noncommutative geometry and physics. Classical aspects relating to group actions and gradings have been complemented by new insights stemming from Hopf algebra theory. Old and new methods are presented in full detail and in a self-contained way. Graduate students as well as researchers in algebra, geometry, will find in this book a useful toolbox. Exercises, with hints for solution, provide a direct link to recent research publications. The book is suitable for courses on Master level or textbook for seminars.

  6. Laser pulse stacking method

    Science.gov (United States)

    Moses, E.I.

    1992-12-01

    A laser pulse stacking method is disclosed. A problem with the prior art has been the generation of a series of laser beam pulses where the outer and inner regions of the beams are generated so as to form radially non-synchronous pulses. Such pulses thus have a non-uniform cross-sectional area with respect to the outer and inner edges of the pulses. The present invention provides a solution by combining the temporally non-uniform pulses in a stacking effect to thus provide a more uniform temporal synchronism over the beam diameter. 2 figs.

  7. Alternative Methods of Regression

    CERN Document Server

    Birkes, David

    2011-01-01

    Of related interest. Nonlinear Regression Analysis and its Applications Douglas M. Bates and Donald G. Watts ".an extraordinary presentation of concepts and methods concerning the use and analysis of nonlinear regression models.highly recommend[ed].for anyone needing to use and/or understand issues concerning the analysis of nonlinear regression models." --Technometrics This book provides a balance between theory and practice supported by extensive displays of instructive geometrical constructs. Numerous in-depth case studies illustrate the use of nonlinear regression analysis--with all data s

  8. Caractérisation par différentes méthodes physico-chimiques de types de matière organique dans des sédiments du Crétacé d'Atlantique en mer profonde Using Different Physico-Chemical Methods to Characterize Organic-Matter Types in Cretaceous Sediments from the Deep Offshore Atlantic

    Directory of Open Access Journals (Sweden)

    Roucaché J.

    2006-11-01

    Full Text Available Différentes techniques physico-chimiques ont été mises en oeuvre pour riser les types de matières organiques rencontrées dans les sédiments, 1 évolués, du Crétacé des marges continentales de l'Atlantique, recueillis des campagnes de forage du Deep Sea Drilling Project. C'est ainsi qu'on pu être utilisées l'information fournie par une méthode préliminaire rapide et globale, la pyrolyse de la roche brute, et les informations tirées d'analyses plus détaillées de la matière organique, à savoir sur la fraction extractible en milieu aqueux, sur la fraction extractible en milieu organique et sur la fraction insoluble dite résidu stable, ou kérogène. En considérant les populations d'échantillons, sélectionnées d'après les résultats de la pyrolyse, en fonction de l'analyse élémentaire de leur matière organique insoluble et de la teneur en carbone organique lié à leurs composés humiques, nous montrons qu'une matière organique homogène d'origine aquatique peut être identifiée dès l'étude par pyrolyse de la roche brute. II en est de même pour une matière organique d'origine continentale; le cas échéant, l'importance des composés humiques constituera un contrôle en ce qui concerne la matière organique continentale. Par contre, si le matériel organique du sédiment est un mélange de matières organiques d'origine différente, il est difficile, sinon impossible, d'en identifier les constituants si l'on ne procède pas aux analyses détaillées du protocole analytique recommandé. Different physico-chemicaltechniques were used to characterize the types of organic motter encountered in relatively unevolved Cretaceous sediments from the continental margins in the Atlantic that were collected during the drilling campaigns as part of the Deep Sec Drilling Project. Use was made of information provided by a quick and overall preliminary method, i. e. the pyrolysis of crude rock, and the information provided by more

  9. Method Engineering: Engineering of Information Systems Development Methods and Tools

    OpenAIRE

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

  10. Chemical decontamination method

    International Nuclear Information System (INIS)

    Nishiwaki, Hitoshi.

    1996-01-01

    Metal wastes contaminated by radioactive materials are contained in a rotational decontamination vessel, and the metal wastes are rotated therein while being in contact with a slight amount of a decontamination liquid comprising a mineral acid. As the mineral acid, a mixed acid of nitric acid, hydrochloric acid and fluoric acid is preferably used. Alternatively, chemical decontamination can also be conducted by charging an acid resistant stirring medium in the rotational decontamination vessel. The surface of the metal wastes is uniformly covered by the slight amount of decontamination liquid to dissolve the surface layer. In addition, heat of dissolution generated in this case is accumulated in the inside of the rotational decontamination vessel, the temperature is elevated with no particular heating, thereby enabling to obtain an excellent decontamination effect substantially at the same level as in the case of heating the liquid to 70degC in a conventional immersion decontamination method. Further, although contact areas between the metal wastes and the immersion vessel are difficult to be decontaminated in the immersion decontamination method, all of areas can be dissolved uniformly in the present invention. (T.M.)

  11. Nanoscale waveguiding methods

    Directory of Open Access Journals (Sweden)

    Wang Chia-Jean

    2007-01-01

    Full Text Available AbstractWhile 32 nm lithography technology is on the horizon for integrated circuit (IC fabrication, matching the pace for miniaturization with optics has been hampered by the diffraction limit. However, development of nanoscale components and guiding methods is burgeoning through advances in fabrication techniques and materials processing. As waveguiding presents the fundamental issue and cornerstone for ultra-high density photonic ICs, we examine the current state of methods in the field. Namely, plasmonic, metal slot and negative dielectric based waveguides as well as a few sub-micrometer techniques such as nanoribbons, high-index contrast and photonic crystals waveguides are investigated in terms of construction, transmission, and limitations. Furthermore, we discuss in detail quantum dot (QD arrays as a gain-enabled and flexible means to transmit energy through straight paths and sharp bends. Modeling, fabrication and test results are provided and show that the QD waveguide may be effective as an alternate means to transfer light on sub-diffraction dimensions.

  12. Spent fuel reprocessing method

    International Nuclear Information System (INIS)

    Shoji, Hirokazu; Mizuguchi, Koji; Kobayashi, Tsuguyuki.

    1996-01-01

    Spent oxide fuels containing oxides of uranium and transuranium elements are dismantled and sheared, then oxide fuels are reduced into metals of uranium and transuranium elements in a molten salt with or without mechanical removal of coatings. The reduced metals of uranium and transuranium elements and the molten salts are subjected to phase separation. From the metals of uranium and transuranium elements subjected to phase separation, uranium is separated to a solid cathode and transuranium elements are separated to a cadmium cathode by an electrolytic method. Molten salts deposited together with uranium to the solid cathode, and uranium and transuranium elements deposited to the cadmium cathode are distilled to remove deposited molten salts and cadmium. As a result, TRU oxides (solid) such as UO 2 , Pu 2 in spent fuels can be reduced to U and TRU by a high temperature metallurgical method not using an aqueous solution to separate them in the form of metal from other ingredients, and further, metal fuels can be obtained through an injection molding step depending on the purpose. (N.H.)

  13. Magnesium fluoride recovery method

    International Nuclear Information System (INIS)

    Gay, R.L.; McKenzie, D.E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag formed in the production of metallic uranium by the reduction of depleted uranium tetrafluoride with metallic magnesium in a retort wherein the slag contains the free metals magnesium and uranium and also oxides and fluorides of the metals. The slag having a radioactivity level of at least about 7,000 rhoCi/gm. The method comprises the steps of: grinding the slag to a median particle size of about 200 microns; contacting the ground slag in a reaction zone with an acid having a strength of from about 0.5 to 1.5 N for a time of from about 4 to about 20 hours in the presence of a catalytic amount of iron; removing the liquid product; treating the particulate solid product; repeating the last two steps at least one more time to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 rhoCi/gm

  14. Neutron source multiplication method

    International Nuclear Information System (INIS)

    Clayton, E.D.

    1985-01-01

    Extensive use has been made of neutron source multiplication in thousands of measurements of critical masses and configurations and in subcritical neutron-multiplication measurements in situ that provide data for criticality prevention and control in nuclear materials operations. There is continuing interest in developing reliable methods for monitoring the reactivity, or k/sub eff/, of plant operations, but the required measurements are difficult to carry out and interpret on the far subcritical configurations usually encountered. The relationship between neutron multiplication and reactivity is briefly discussed and data presented to illustrate problems associated with the absolute measurement of neutron multiplication and reactivity in subcritical systems. A number of curves of inverse multiplication have been selected from a variety of experiments showing variations observed in multiplication during the course of critical and subcritical experiments where different methods of reactivity addition were used, with different neutron source detector position locations. Concern is raised regarding the meaning and interpretation of k/sub eff/ as might be measured in a far subcritical system because of the modal effects and spectrum differences that exist between the subcritical and critical systems. Because of this, the calculation of k/sub eff/ identical with unity for the critical assembly, although necessary, may not be sufficient to assure safety margins in calculations pertaining to far subcritical systems. Further study is needed on the interpretation and meaning of k/sub eff/ in the far subcritical system

  15. Cold fusion method

    International Nuclear Information System (INIS)

    Takahashi, Akihito.

    1994-01-01

    A Pt wire electrode is supported from the periphery relative to a Pd electrode by way of a polyethylene or teflon plate in heavy water, and electrolysis is applied while varying conditions successively in a sawteeth fashion at an initial stage, and after elapse of about one week, a pulse current is supplied to promote nuclear reaction and to generate excess heat greater than a charged electric power. That is, small amount of neutron emission is increased and electrolytic cell temperature is elevated by varying the electrolysis conditions successively in the sawteeth fashion at the initial stage. In addition, when the pulse electric current is supplied after elapse of about one week, the electrolytic cell temperature is abnormally elevated, so that the promotion of nuclear reaction phenomenon and the generation of excess heat greater than the charged electric power are recognized. Then, a way to control power level and time fluctuation of cold fusion is attained, thereby contributing to development of a further method for generating excess heat as desired. In addition, it contributes to a development for a method of obtaining such an excess heat that can be taken as a new energy. (N.H.)

  16. Plasma position control method

    International Nuclear Information System (INIS)

    Shirahama, Hidefumi; Sakurai, Yoshimi.

    1988-01-01

    Purpose: To suppress the non-linear relationship between the horizontal position of plasmas and the intensity of the vertical magnetic fields, thereby control the horizontal position of the plasmas stably and at a high speed in a closed loop in a tokamak type thermonuclear device. Method: In a control method for approaching the plasma position to a target position in the tokamak type thermonuclear device, a function circuit having two inputs and one output is disposed in a loop constituting the plasma position control system. The characteristics of the function circuit are so designed as to provide a proportional relationship between the first input and the output, while an inverse proportional relationship between the second input and the output. A detected value for the plasma current is used as a signal for the first input, while the detected value for the plasma position or a operation amount based on the difference with the detected value is used as a signal for the second input. By using the function circuit, it is possible to suppress the non-linear characteristics in the dynamic properties of the plasmas, by which the remarkable change of gains in the plasma position control circuit due to the fluctuations of the plasma current and the position can be prevented. (Ikeda, J.)

  17. The Scheimpflug lidar method

    Science.gov (United States)

    Brydegaard, Mikkel; Malmqvist, Elin; Jansson, Samuel; Larsson, Jim; Török, Sandra; Zhao, Guangyu

    2017-08-01

    The recent several years we developed the Scheimpflug lidar method. We combined an invention from the 19th century with modern optoelectronics such as diode lasers and CMOS array from the 21st century. The approach exceeds expectations of background suppression, sensitivity and resolution beyond known from time-of-flight lidars. We accomplished multiband elastic atmospheric lidars for resolving single particles and aerosol plumes from 405 nm to 1550 nm. We pursued hyperspectral differential absorption lidar for molecular species. We demonstrated a simple method of inelastic hyperspectral lidar for profiling aquatic environments and vegetation structure. Not least, we have developed polarimetric Scheimpflug lidar with multi-kHz sampling rates for remote modulation spectroscopy and classification of aerofauna. All these advances are thanks to the Scheimpflug principle. Here we give a review of how far we have come and shed light on the limitations and opportunities for future directions. In particular, we show how the biosphere can be resolved with unsurpassed resolution in space and time, and share our expectation on how this can revolutionize ecological analysis and management in relation to agricultural pests, disease vectors and pollinator problematics.

  18. Introduction to DNA methods

    International Nuclear Information System (INIS)

    Delincee, H.

    1991-01-01

    The purpose of this session is to discuss the various possibilities for detecting modifications in DNA after irradiation and whether these changes can be utilized as an indicator for the irradiation treatment of foods. The requirement to be fulfilled is that the method be able to distinguish irradiated food without the presence of a control sample, thus the measured response after irradiation must be large enough to supersede background levels from other treatments. Much work has been performed on the effects of radiation on DNA, particularly due to its importance in radiation biology. The main lesions of DNA as a result of irradiation are base damage, damage of the sugar moiety, single strand and double strand breaks. Crosslinking between bases also occurs, e.g. production of thymine dimers, or between DNA and protein. A valuable review on how to utilize these DNA changes for detection purposes has already appeared. Tables 1, 2 and 3 list the proposed methods of detecting changes in irradiated DNA, some identified products as examples for a possible irradiation indicator, in the case of immunoassay the substance used as antigen, and some selected literature references. In this short review, it is not intended to provide a complete literature survey

  19. Gas centrifuge purge method

    International Nuclear Information System (INIS)

    Theurich, G.R.

    1976-01-01

    A method of separating isotopes in a high speed gas centrifuge is presented. A vertically oriented cylindrical rotor bowl is adapted to rotate about its axis within an evacuated chamber, and an annular molecular pump having an intake end and a discharge end encircles the uppermost portion of the rotor bowl. The molecular pump is attached along its periphery in a leak-tight manner to the evacuated chamber. End cap closure means are affixed to the upper end of the rotor bowl, and a process gas withdrawal and insertion system enters the bowl through the end cap closure means. The evacuated chamber, molecular pump, and end cap define an upper zone at the discharge end of the molecular pump, and the evacuated chamber, molecular pump, and rotor bowl define a lower annular zone at the intake end of said molecular pump. The method for removing gases from the upper and lower zones during centrifuge operation with a minimum loss of process gas from the rotor bowl is described

  20. Research methods in information

    CERN Document Server

    Pickard, Alison Jane

    2013-01-01

    The long-awaited 2nd edition of this best-selling research methods handbook is fully updated and includes brand new coverage of online research methods and techniques, mixed methodology and qualitative analysis. There is an entire chapter contributed by Professor Julie McLeod, Sue Childs and Elizabeth Lomas focusing on research data management, applying evidence from the recent JISC funded 'DATUM' project. The first to focus entirely on the needs of the information and communications community, it guides the would-be researcher through the variety of possibilities open to them under the heading "research" and provides students with the confidence to embark on their dissertations. The focus here is on the 'doing' and although the philosophy and theory of research is explored to provide context, this is essentially a practical exploration of the whole research process with each chapter fully supported by examples and exercises tried and tested over a whole teaching career. The book will take readers through eac...

  1. Conjugated polymer nanoparticles, methods of using, and methods of making

    KAUST Repository

    Habuchi, Satoshi

    2017-03-16

    Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

  2. [Surgical methods of abortion].

    Science.gov (United States)

    Linet, T

    2016-12-01

    A state of the art of surgical method of abortion focusing on safety and practical aspects. A systematic review of French-speaking or English-speaking evidence-based literature about surgical methods of abortion was performed using Pubmed, Cochrane and international recommendations. Surgical abortion is efficient and safe regardless of gestational age, even before 7 weeks gestation (EL2). A systematic prophylactic antibiotics should be preferred to a targeted antibiotic prophylaxis (grade A). In women under 25 years, doxycycline is preferred (grade C) due to the high prevalence of Chlamydia trachomatis. Systematic cervical preparation is recommended for reducing the incidence of complications from vacuum aspiration (grade A). Misoprostol is a first-line agent (grade A). When misoprostol is used before a vacuum aspiration, a dose of 400 mcg is recommended. The choice of vaginal route or sublingual administration should be left to the woman: (i) the vaginal route 3 hours before the procedure has a good efficiency/safety ratio (grade A); (ii) the sublingual administration 1 to 3 hours before the procedure has a higher efficiency (EL1). The patient should be warned of more common gastrointestinal side effects. The addition of mifepristone 200mg 24 to 48hours before the procedure is interesting for pregnancies between 12 and 14 weeks gestations (EL2). The systematic use of nonsteroidal anti-inflammatory drugs is recommended for limiting the operative and postoperative pain (grade B). Routine vaginal application of an antiseptic prior to the procedure cannot be recommended (grade B). The type of anesthesia (general or local) should be left up to the woman after explanation of the benefit-risk ratio (grade B). Paracervical local anesthesia (PLA) is recommended before performing a vacuum aspiration under local anesthesia (grade A). The electric or manual vacuum methods are very effective, safe and acceptable to women (grade A). Before 9 weeks gestation

  3. Method for synthesizing HMX

    Science.gov (United States)

    McGuire, Raymond R.; Coon, Clifford L.; Harrar, Jackson E.; Pearson, Richard K.

    1984-01-01

    A method and apparatus for electrochemically synthesizing N.sub.2 O.sub.5 cludes oxidizing a solution of N.sub.2 O.sub.4 /HNO.sub.3 at an anode, while maintaining a controlled potential between the N.sub.2 O.sub.4 /HNO.sub.3 solution and the anode. A potential of about 1.35 to 2.0 V vs. SCE is preferred, while a potential of about 1.80 V vs. SCE is most preferred. Thereafter, the N.sub.2 O.sub.5 is reacted with either 1.5-diacetyl-3,7-dinitro-1,3,5,7-tetraazacyclooctane (DADN) or 1,3,5,7-tetraacetyl-1,3,5,7-tetraazacyclooctane (TAT) to form cyclotetramethylenetetraamine (HMX).

  4. Radiofrequency attenuator and method

    Science.gov (United States)

    Warner, Benjamin P [Los Alamos, NM; McCleskey, T Mark [Los Alamos, NM; Burrell, Anthony K [Los Alamos, NM; Agrawal, Anoop [Tucson, AZ; Hall, Simon B [Palmerston North, NZ

    2009-01-20

    Radiofrequency attenuator and method. The attenuator includes a pair of transparent windows. A chamber between the windows is filled with molten salt. Preferred molten salts include quarternary ammonium cations and fluorine-containing anions such as tetrafluoroborate (BF.sub.4.sup.-), hexafluorophosphate (PF.sub.6.sup.-), hexafluoroarsenate (AsF.sub.6.sup.-), trifluoromethylsulfonate (CF.sub.3SO.sub.3.sup.-), bis(trifluoromethylsulfonyl)imide ((CF.sub.3SO.sub.2).sub.2N.sup.-), bis(perfluoroethylsulfonyl)imide ((CF.sub.3CF.sub.2SO.sub.2).sub.2N.sup.-) and tris(trifluoromethylsulfonyl)methide ((CF.sub.3SO.sub.2).sub.3C.sup.-). Radicals or radical cations may be added to or electrochemically generated in the molten salt to enhance the RF attenuation.

  5. Mathematical methods in engineering

    CERN Document Server

    Machado, José

    2014-01-01

    This book presents a careful selection of the contributions presented at the Mathematical Methods in Engineering (MME10) International Symposium, held at the Polytechnic Institute of Coimbra- Engineering Institute of Coimbra (IPC/ISEC), Portugal, October 21-24, 2010. The volume discusses recent developments about theoretical and applied mathematics toward the solution of engineering problems, thus covering a wide range of topics, such as:  Automatic Control, Autonomous Systems, Computer Science, Dynamical Systems and Control,  Electronics, Finance and Economics, Fluid Mechanics and Heat Transfer, Fractional Mathematics, Fractional Transforms and Their Applications,  Fuzzy Sets and Systems, Image and Signal Analysis, Image Processing, Mechanics, Mechatronics, Motor Control and Human Movement Analysis, Nonlinear Dynamics, Partial Differential Equations, Robotics, Acoustics, Vibration and Control, and Wavelets.

  6. Methods for studying oogenesis.

    Science.gov (United States)

    Hudson, Andrew M; Cooley, Lynn

    2014-06-15

    Drosophila oogenesis is an excellent system for the study of developmental cell biology. Active areas of research include stem cell maintenance, gamete development, pattern formation, cytoskeletal regulation, intercellular communication, intercellular transport, cell polarity, cell migration, cell death, morphogenesis, cell cycle control, and many more. The large size and relatively simple organization of egg chambers make them ideally suited for microscopy of both living and fixed whole mount tissue. A wide range of tools is available for oogenesis research. Newly available shRNA transgenic lines provide an alternative to classic loss-of-function F2 screens and clonal screens. Gene expression can be specifically controlled in either germline or somatic cells using the Gal4/UAS system. Protein trap lines provide fluorescent tags of proteins expressed at endogenous levels for live imaging and screening backgrounds. This review provides information on many available reagents and key methods for research in oogenesis. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Reduced NOX combustion method

    International Nuclear Information System (INIS)

    Delano, M.A.

    1991-01-01

    This patent describes a method for combusting fuel and oxidant to achieve reduced formation of nitrogen oxides. It comprises: It comprises: heating a combustion zone to a temperature at least equal to 1500 degrees F.; injecting into the heated combustion zone a stream of oxidant at a velocity within the range of from 200 to 1070 feet per second; injecting into the combustion zone, spaced from the oxidant stream, a fuel stream at a velocity such that the ratio of oxidant stream velocity to fuel stream velocity does not exceed 20; aspirating combustion gases into the oxidant stream and thereafter intermixing the aspirated oxidant stream and fuel stream to form a combustible mixture; combusting the combustible mixture to produce combustion gases for the aspiration; and maintaining the fuel stream substantially free from contact with oxidant prior to the intermixture with aspirated oxidant

  8. New methods of acceleration

    International Nuclear Information System (INIS)

    Ivanov, I.N.; Sarantsev, V.P.

    1976-01-01

    The most perspective methods of the collective acceleration of particles are considered, namely, acceleration of ions in direct electron beams and electron rings. Several models of particle acceleration by means of electron beams are described. Experimental data on the acceleration of differently charged ions show that the ion energy increases with the charge. Time-of-flight measurements show that during acceleration the ion bunch is located behind the beam front. The injection of electrons into an electron-ring accelerator and the electron acceleration are considered in detail. The most dangerous effects are described, which restrict the number of particles captured in the electron-ring accelerator. Several mechanisms are considered for retaining the cross-sectional dimensions of the moving ring

  9. Waveguide disturbance detection method

    Science.gov (United States)

    Korneev, Valeri A.; Nihei, Kurt T.; Myer, Larry R.

    2000-01-01

    A method for detection of a disturbance in a waveguide comprising transmitting a wavefield having symmetric and antisymmetric components from a horizontally and/or vertically polarized source and/or pressure source disposed symmetrically with respect to the longitudinal central axis of the waveguide at one end of the waveguide, recording the horizontal and/or vertical component or a pressure of the wavefield with a vertical array of receivers disposed at the opposite end of the waveguide, separating the wavenumber transform of the wavefield into the symmetric and antisymmetric components, integrating the symmetric and antisymmetric components over a broad frequency range, and comparing the magnitude of the symmetric components and the antisymmetric components to an expected magnitude for the symmetric components and the antisymmetric components for a waveguide of uniform thickness and properties thereby determining whether or not a disturbance is present inside the waveguide.

  10. Modified risk evaluation method

    International Nuclear Information System (INIS)

    Udell, C.J.; Tilden, J.A.; Toyooka, R.T.

    1993-08-01

    The purpose of this paper is to provide a structured and cost-oriented process to determine risks associated with nuclear material and other security interests. Financial loss is a continuing concern for US Department of Energy contractors. In this paper risk is equated with uncertainty of cost impacts to material assets or human resources. The concept provides a method for assessing the effectiveness of an integrated protection system, which includes operations, safety, emergency preparedness, and safeguards and security. The concept is suitable for application to sabotage evaluations. The protection of assets is based on risk associated with cost impacts to assets and the potential for undesirable events. This will allow managers to establish protection priorities in terms of the cost and the potential for the event, given the current level of protection

  11. Methods for RNA Analysis

    DEFF Research Database (Denmark)

    Olivarius, Signe

    While increasing evidence appoints diverse types of RNA as key players in the regulatory networks underlying cellular differentiation and metabolism, the potential functions of thousands of conserved RNA structures encoded in mammalian genomes remain to be determined. Since the functions of most...... RNAs rely on interactions with proteins, the establishment of protein-binding profiles is essential for the characterization of RNAs. Aiming to facilitate RNA analysis, this thesis introduces proteomics- as well as transcriptomics-based methods for the functional characterization of RNA. First, RNA......-protein pulldown combined with mass spectrometry analysis is applied for in vivo as well as in vitro identification of RNA-binding proteins, the latter succeeding in verifying known RNA-protein interactions. Secondly, acknowledging the significance of flexible promoter usage for the diversification...

  12. Radioactive air sampling methods

    CERN Document Server

    Maiello, Mark L

    2010-01-01

    Although the field of radioactive air sampling has matured and evolved over decades, it has lacked a single resource that assimilates technical and background information on its many facets. Edited by experts and with contributions from top practitioners and researchers, Radioactive Air Sampling Methods provides authoritative guidance on measuring airborne radioactivity from industrial, research, and nuclear power operations, as well as naturally occuring radioactivity in the environment. Designed for industrial hygienists, air quality experts, and heath physicists, the book delves into the applied research advancing and transforming practice with improvements to measurement equipment, human dose modeling of inhaled radioactivity, and radiation safety regulations. To present a wide picture of the field, it covers the international and national standards that guide the quality of air sampling measurements and equipment. It discusses emergency response issues, including radioactive fallout and the assets used ...

  13. Catalysts and method

    Science.gov (United States)

    Taylor, Charles E.; Noceti, Richard P.

    1991-01-01

    An improved catlayst and method for the oxyhydrochlorination of methane is disclosed. The catalyst includes a pyrogenic porous support on which is layered as active material, cobalt chloride in major proportion, and minor proportions of an alkali metal chloride and of a rare earth chloride. On contact of the catalyst with a gas flow of methane, HC1 and oxygen, more than 60% of the methane is converted and of that converted more than 40% occurs as monochloromethane. Advantageously, the monochloromethane can be used to produce gasoline boiling range hydrocarbons with the recycle of HCl for further reaction. This catalyst is also of value for the production of formic acid as are analogous catalysts with lead, silver or nickel chlorides substituted for the cobalt chloride.

  14. Error detection method

    Science.gov (United States)

    Olson, Eric J.

    2013-06-11

    An apparatus, program product, and method that run an algorithm on a hardware based processor, generate a hardware error as a result of running the algorithm, generate an algorithm output for the algorithm, compare the algorithm output to another output for the algorithm, and detect the hardware error from the comparison. The algorithm is designed to cause the hardware based processor to heat to a degree that increases the likelihood of hardware errors to manifest, and the hardware error is observable in the algorithm output. As such, electronic components may be sufficiently heated and/or sufficiently stressed to create better conditions for generating hardware errors, and the output of the algorithm may be compared at the end of the run to detect a hardware error that occurred anywhere during the run that may otherwise not be detected by traditional methodologies (e.g., due to cooling, insufficient heat and/or stress, etc.).

  15. Adaptive multiresolution methods

    Directory of Open Access Journals (Sweden)

    Schneider Kai

    2011-12-01

    Full Text Available These lecture notes present adaptive multiresolution schemes for evolutionary PDEs in Cartesian geometries. The discretization schemes are based either on finite volume or finite difference schemes. The concept of multiresolution analyses, including Harten’s approach for point and cell averages, is described in some detail. Then the sparse point representation method is discussed. Different strategies for adaptive time-stepping, like local scale dependent time stepping and time step control, are presented. Numerous numerical examples in one, two and three space dimensions validate the adaptive schemes and illustrate the accuracy and the gain in computational efficiency in terms of CPU time and memory requirements. Another aspect, modeling of turbulent flows using multiresolution decompositions, the so-called Coherent Vortex Simulation approach is also described and examples are given for computations of three-dimensional weakly compressible mixing layers. Most of the material concerning applications to PDEs is assembled and adapted from previous publications [27, 31, 32, 34, 67, 69].

  16. Ultrasonic grinding method

    International Nuclear Information System (INIS)

    Miyahara, Shuji.

    1990-01-01

    An ultrasonic generator and a liquid supply nozzle are opposed to an object to be ground and a pump is started in this state to supply an organic solvent. Matters to be decontaminated which adheres to the surface of the object to be ground and are difficult to be removed by a mere mechanical removing method can be eliminated previously by the surface active effect of the organic solvent such as ethanol prior to the oscillation of the ultrasonic generator. Subsequently, when the ultrasonic generator is oscillated, scales in the floated state can be removed simply. Further, since the organic solvent can penetrate to provide the surface active effect even in such a narrow portion that the top end of the ultrasonic generator is difficult to the intruded at the surface of the object to be ground, the decontaminating treatment can be applied also to such a narrow portion. (T.M.)

  17. Lubrication method and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, R.S.

    1988-05-03

    In a combustion turbine engine comprising a bearing member journaling a rotatable component, and compressor means providing pressurized air, the method of providing liquid lubricant to the bearing member is described comprising the steps of: providing the liquid lubricant sealed within a collapsible and penetrable bladder member; enclosing the bladder member and lubricant within a substantially closed housing sealingly cooperating with the bladder member to define a pair of chambers; arranging a penetrating lance member in one of the pair of chambers in confronting relationship with the bladder member; providing communication of the pressurized air with the other of the pair of chambers to force the bladder member into impaled sealing relationship with the lance member; communicating the lubricant to the bearing member via the lance member; and utilizing the pressurized air within the other chamber to collapse the bladder member, simultaneously flowing the lubricant to the bearing member.

  18. Method for radioactivity monitoring

    Science.gov (United States)

    Umbarger, C. John; Cowder, Leo R.

    1976-10-26

    The disclosure relates to a method for analyzing uranium and/or thorium contents of liquid effluents preferably utilizing a sample containing counting chamber. Basically, 185.7-keV gamma rays following .sup.235 U alpha decay to .sup.231 Th which indicate .sup.235 U content and a 63-keV gamma ray doublet found in the nucleus of .sup.234 Pa, a granddaughter of .sup.238 U, are monitored and the ratio thereof taken to derive uranium content and isotopic enrichment .sup.235 U/.sup.235 U + .sup.238 U) in the liquid effluent. Thorium content is determined by monitoring the intensity of 238-keV gamma rays from the nucleus of .sup.212 Bi in the decay chain of .sup.232 Th.

  19. Baryons with functional methods

    International Nuclear Information System (INIS)

    Fischer, Christian S.

    2017-01-01

    We summarise recent results on the spectrum of ground-state and excited baryons and their form factors in the framework of functional methods. As an improvement upon similar approaches we explicitly take into account the underlying momentum-dependent dynamics of the quark-gluon interaction that leads to dynamical chiral symmetry breaking. For light octet and decuplet baryons we find a spectrum in very good agreement with experiment, including the level ordering between the positive- and negative-parity nucleon states. Comparing the three-body framework with the quark-diquark approximation, we do not find significant differences in the spectrum for those states that have been calculated in both frameworks. This situation is different in the electromagnetic form factor of the Δ, which may serve to distinguish both pictures by comparison with experiment and lattice QCD.

  20. Freeze drying method

    International Nuclear Information System (INIS)

    Coppa, N.V.; Stewart, P.; Renzi, E.

    1999-01-01

    The present invention provides methods and apparatus for freeze drying in which a solution, which can be a radioactive salt dissolved within an acid, is frozen into a solid on vertical plates provided within a freeze drying chamber. The solid is sublimated into vapor and condensed in a cold condenser positioned above the freeze drying chamber and connected thereto by a conduit. The vertical positioning of the cold condenser relative to the freeze dryer helps to help prevent substances such as radioactive materials separated from the solution from contaminating the cold condenser. Additionally, the system can be charged with an inert gas to produce a down rush of gas into the freeze drying chamber to also help prevent such substances from contaminating the cold condenser

  1. CRUCIBLE LINING METHOD

    Science.gov (United States)

    Bone, W.H.; Schmidt, W.W.

    1958-11-01

    A method is presented for forming refractory liners in cylindrical reaction vessels used for the reductlon of uranium tetrafluoride to metallic uranium. A preliminary form, having positioning lugs attached thereto, is inserted into the reaction vessel and the refractory powder, usually CaO, is put in the annular space between the form and the inner wall of the reaction vessel. A jolting table is used to compact this charge of liner material ln place, and after thls has been done, the preliminary form is removed and the flnal form or plug is lnserted without disturbing the partially completed lining. The remainder of the lining charge is then introduced and compacted by jolting, after which the form is removed.

  2. Microencapsulation system and method

    Science.gov (United States)

    Morrison, Dennis R. (Inventor)

    2009-01-01

    A microencapsulation apparatus is provided which is configured to form co-axial multi-lamellar microcapsules from materials discharged from first and second microsphere dispensers of the apparatus. A method of fabricating and processing microcapsules is also provided which includes forming distinct droplets comprising one or more materials and introducing the droplets directly into a solution bath to form a membrane around the droplets such that a plurality of microcapsules are formed. A microencapsulation system is provided which includes a microcapsule production unit, a fluidized passage for washing and harvesting microcapsules dispensed from the microcapsule production unit and a flow sensor for sizing and counting the microcapsules. In some embodiments, the microencapsulation system may further include a controller configured to simultaneously operate the microcapsule production unit, fluidized passage and flow sensor to process the microcapsules in a continuous manner.

  3. Data mining methods

    CERN Document Server

    Chattamvelli, Rajan

    2015-01-01

    DATA MINING METHODS, Second Edition discusses both theoretical foundation and practical applications of datamining in a web field including banking, e-commerce, medicine, engineering and management. This book starts byintroducing data and information, basic data type, data category and applications of data mining. The second chapterbriefly reviews data visualization technology and importance in data mining. Fundamentals of probability and statisticsare discussed in chapter 3, and novel algorithm for sample covariants are derived. The next two chapters give an indepthand useful discussion of data warehousing and OLAP. Decision trees are clearly explained and a new tabularmethod for decision tree building is discussed. The chapter on association rules discusses popular algorithms andcompares various algorithms in summary table form. An interesting application of genetic algorithm is introduced inthe next chapter. Foundations of neural networks are built from scratch and the back propagation algorithm is derived...

  4. Floating Silicon Method

    Energy Technology Data Exchange (ETDEWEB)

    Kellerman, Peter

    2013-12-21

    The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

  5. Section for qualitative methods (Letter)

    OpenAIRE

    Todd, Z.; Madill, A.

    2004-01-01

    Qualitative research methods are increasingly used in all areas of psychology. We have proposed a new Section – the Qualitative Methods in Psychology Section – for anyone with an interest in using these research methods.

  6. Detection methods for irradiated food

    International Nuclear Information System (INIS)

    Stevenson, M.H.

    1993-01-01

    The plenary lecture gives a brief historical review of the development of methods for the detection of food irradiation and defines the demands on such methods. The methods described in detail are as follows: 1) Physical methods: As examples of luminescence methods, thermoluminescence and chermoluminescence are mentioned; ESR spectroscopy is discussed in detail by means of individual examples (crustaceans, frutis and vegetables, spieces and herbs, nuts). 2) Chemical methods: Examples given for these are methods that make use of alterations in lipids through radiation (formation of long-chain hydrocarbons, formation of 2-alkyl butanones), respectively radiation-induced alterations in the DNA. 3) Microbiological methods. An extensive bibliography is appended. (VHE) [de

  7. Comparative law as method and the method of comparative law

    NARCIS (Netherlands)

    Hage, J.C.; Adams, M.; Heirbaut, D.

    2014-01-01

    This article addresses both the justificatory role of comparative law within legal research (comparative law as method) and the method of comparative law itself. In this connection two questions will be answered: 1. Is comparative law a method, or a set of methods, for legal research? 2. Does

  8. New contraceptive methods.

    Science.gov (United States)

    Plourd, David M; Rayburn, William F

    2003-09-01

    To provide an update on the current trend toward increasing use of emergency postcoital contraception, continuous (or "extended-use") oral contraceptives (OCs) and longer-acting contraceptive delivery systems. This review is based largely upon patient care-oriented clinical experience data, including some original work submitted to the U.S. Food and Drug Administration by the primary investigators of these novel methods, supplemented, when appropriate, with basic pharmacologic and pharmacokinetic information. This review is a distillation based on an exhaustive literature search of each of the following topics: emergency postcoital contraception, continuous (extended-use) oral contraception, the weekly patch, the monthly vaginal ring and the monthly injectable. The issue of OC formulations recently begun to be marketed in this country was excluded since they have been extensively reviewed elsewhere. Emergency postcoital contraception is highly effective, though not as effective as available proactive methods of hormonal contraception. Of the popular regimens available, all have similar efficacy; those without estrogen are associated with less nausea and vomiting. The prophylactic administration of an antiemetic 1 hour prior to the first contraceptive dose can mitigate this adverse side effect. Continuous (or "extended" use) of OCs has become increasingly popular. This can decrease or eliminate menstruation as well as several menstruation-related complaints (e.g., dysmenorrhea, menstrual migraines and premenstrual symptoms). Despite the fact that combination OC regimens offer highly reliable contraception as well as several noncontraceptive health benefits, they are limited by the issue of daily compliance. To address this limitation, several longer-acting delivery systems were recently developed. The weekly patch, monthly vaginal ring and monthly injectable have efficacy and side effect profiles similar to those of comparable OC formulations. They offer the

  9. Assay method and compositions

    International Nuclear Information System (INIS)

    1977-01-01

    Methods are described for measuring catecholamine levels in human and animal body fluids and tissues using the catechol-O-methyl-transferase (COMT) radioassay. The assay involves incubating the biological sample with COMT and the tritiated methyl donor, S-adenosyl-L-methionine( 3 H)-methyl. The O-methylated ( 3 H) epinephrine and/or norepinephrine are extracted and oxidised to vanillin- 3 H which in turn is extracted and its radioactivity counted. When analysing dopamine levels the assay is extended by vanillin- 3 H and raising the pH of the aqueous periodate phase from which O-methylated ( 3 H) dopamine is extracted and counted. The assay may be modified depending on whether measurements of undifferentiated total endogenous catecholamine levels or differential analyses of the catecholamine levels are being performed. The sensitivity of the assay can be as low as 5 picograms for norepinephrine and epinephrine and 12 picograms for dopamine. The assemblance of the essential components of the assay into a kit for use in laboratories is also described. (U.K.)

  10. Improved cytometry method

    International Nuclear Information System (INIS)

    McLean, J.R.N.

    1995-09-01

    Chromosome aberrations are widely used as biological indicators of radiation exposure. Chromosomes, isolated from human peripheral blood lymphocytes, are assessed by microscopy for the presence of dicentric aberrations. Dicentric figures are produced almost exclusively by exposure to ionizing radiation. The 'natural' background frequency of the dicentric in non-smoking humans is estimated at 1 in 1000-2000 cells (1). The frequency of this aberration increases with the radiation dose and age, and may possibly be related to lifestyle. The chromosome dicentric is most reliable as a biological dosimeter for uniform whole body exposures delivered at high dose rate (acute exposure). One practical shortcoming of using the frequency of dicentrics as an indicator of radiation dose, is the labor intensive nature of the analysis. State-of-the-art imaging software cannot recognize the wide variety of shapes that can be assumed by dicentric chromosomes. The time required to perform other labor intensive elements of the analytical process can be decreased by means of computer routines. These components include data reduction, recording and collation. Often, these tasks contribute little to the validity of the final dose estimate but nevertheless represent bookkeeping functions that are essential for verification and audit purposes should the need ever arise. This report describes a computer-assisted method of chromosomes dicentric analysis that more than doubles the efficiency of the analytical process. (author). 4 refs., 3 figs

  11. Method for etherifications

    Science.gov (United States)

    Jones, Jr., Edward M.

    1985-01-01

    A method for producing tertiary ethers from C.sub.4 or C.sub.5 streams containing isobutene and isoamylene respectively in a process wherein a acidic cation exchange resin is used as the catalyst and as a distillation structure in a distillation reactor column, wherein the improvement is the operation of the catalytic distillation in two zones at different pressures, the first zone containing the catalyst packing and operated a higher pressure in the range of 100 to 200 psig in the case of C.sub.4 's and 15 to 100 psig in the case of C.sub.5 's which favors the etherification reaction and the second zone being a distillation operated at a lower pressure in the range of 0 to 100 psig in the case of C.sub.4 's and 0 to 15 psig in the case of C.sub.5 's wherein a first overhead from the first zone is fractionated to remove a portion of the unreacted alcohol from the first overhead and to return a condensed portion containing said alcohol to the first zone and to produce a second overhead having less alcohol than said first overhead.

  12. Methods for geochemical analysis

    Science.gov (United States)

    Baedecker, Philip A.

    1987-01-01

    The laboratories for analytical chemistry within the Geologic Division of the U.S. Geological Survey are administered by the Office of Mineral Resources. The laboratory analysts provide analytical support to those programs of the Geologic Division that require chemical information and conduct basic research in analytical and geochemical areas vital to the furtherance of Division program goals. Laboratories for research and geochemical analysis are maintained at the three major centers in Reston, Virginia, Denver, Colorado, and Menlo Park, California. The Division has an expertise in a broad spectrum of analytical techniques, and the analytical research is designed to advance the state of the art of existing techniques and to develop new methods of analysis in response to special problems in geochemical analysis. The geochemical research and analytical results are applied to the solution of fundamental geochemical problems relating to the origin of mineral deposits and fossil fuels, as well as to studies relating to the distribution of elements in varied geologic systems, the mechanisms by which they are transported, and their impact on the environment.

  13. Statistical methods for forecasting

    CERN Document Server

    Abraham, Bovas

    2009-01-01

    The Wiley-Interscience Paperback Series consists of selected books that have been made more accessible to consumers in an effort to increase global appeal and general circulation. With these new unabridged softcover volumes, Wiley hopes to extend the lives of these works by making them available to future generations of statisticians, mathematicians, and scientists."This book, it must be said, lives up to the words on its advertising cover: ''Bridging the gap between introductory, descriptive approaches and highly advanced theoretical treatises, it provides a practical, intermediate level discussion of a variety of forecasting tools, and explains how they relate to one another, both in theory and practice.'' It does just that!"-Journal of the Royal Statistical Society"A well-written work that deals with statistical methods and models that can be used to produce short-term forecasts, this book has wide-ranging applications. It could be used in the context of a study of regression, forecasting, and time series ...

  14. Reactor operation method

    International Nuclear Information System (INIS)

    Osumi, Katsumi; Miki, Minoru.

    1979-01-01

    Purpose: To prevent stress corrosion cracks by decreasing the dissolved oxygen and hydrogen peroxide concentrations in the coolants within a reactor container upon transient operation such as at the start-up or shutdown of bwr type reactors. Method: After a condensate has been evacuated, deaeration operation is conducted while opening a main steam drain line, as well as a main steam separation valve and a by-pass valve in a turbine by-pass line connecting the main steam line and the condenser without by way of a turbine, and the reactor is started-up by the extraction of control rods after the concentration of dissolved oxygen in the cooling water within a pressure vessel has been decreased below a predetermined value. Nuclear heating is started after the reactor water has been increased to about 150 0 C by pump heating after the end of the deaeration operation for preventing the concentration of hydrogen peroxide and oxygen in the reactor water from temporarily increasing immediately after the start-up. The corrosive atmosphere in the reactor vessel can thus be moderated. (Horiuchi, T.)

  15. Method of reactor operation

    International Nuclear Information System (INIS)

    Nakajima, Takeshi

    1988-01-01

    Purpose: To minimize the power change due to the increase in xenone and power distribution after reaching the rated power in the case of using fresh fuels no requiring conditioning operation thereby starting the nuclear reactor in a short period of time and stably. Method: When control rods are entirely inserted only with a purpose for the compensation of the reactivity in a xenon-unsaturated state such as upon starting of the nuclear reactor, peaking is generated in the lower portion of the reactor core. Therefore, it is necessary to insert control rods for additionally suppressing the peaking in the lower portion of the reactor core to a relatively shallow level. In view of the above, a plurality of control rods are divided into a first control rod group finally inserted in the rated power state and a second control rod group other than the above. Then, the power is once elevated to the rated power level by means of such an intermediate control rod pattern that the ratio of the total extraction amount between the first control rod group and the second control rod group is made constant. Then, the control rods are extracted stepwise while setting the ratio of the total extraction amount constant in accordance with the change of the accumulating amount of xenone, to thereby obtain the purpose. (kamimura, M.)

  16. Conference on Logical Methods

    CERN Document Server

    Remmel, Jeffrey; Shore, Richard; Sweedler, Moss; Progress in Computer Science and Applied Logic

    1993-01-01

    The twenty-six papers in this volume reflect the wide and still expanding range of Anil Nerode's work. A conference on Logical Methods was held in honor of Nerode's sixtieth birthday (4 June 1992) at the Mathematical Sciences Institute, Cornell University, 1-3 June 1992. Some of the conference papers are here, but others are from students, co-workers and other colleagues. The intention of the conference was to look forward, and to see the directions currently being pursued, in the development of work by, or with, Nerode. Here is a brief summary of the contents of this book. We give a retrospective view of Nerode's work. A number of specific areas are readily discerned: recursive equivalence types, recursive algebra and model theory, the theory of Turing degrees and r.e. sets, polynomial-time computability and computer science. Nerode began with automata theory and has also taken a keen interest in the history of mathematics. All these areas are represented. The one area missing is Nerode's applied mathematica...

  17. Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    M.H.R. Ghoreishy

    2008-02-01

    Full Text Available This research work is devoted to the footprint analysis of a steel-belted radial tyre (185/65R14 under vertical static load using finite element method. Two models have been developed in which in the first model the tread patterns were replaced by simple ribs while the second model was consisted of details of the tread blocks. Linear elastic and hyper elastic (Arruda-Boyce material models were selected to describe the mechanical behavior of the reinforcing and rubbery parts, respectively. The above two finite element models of the tyre were analyzed under inflation pressure and vertical static loads. The second model (with detailed tread patterns was analyzed with and without friction effect between tread and contact surfaces. In every stage of the analysis, the results were compared with the experimental data to confirm the accuracy and applicability of the model. Results showed that neglecting the tread pattern design not only reduces the computational cost and effort but also the differences between computed deformations do not show significant changes. However, more complicated variables such as shape and area of the footprint zone and contact pressure are affected considerably by the finite element model selected for the tread blocks. In addition, inclusion of friction even in static state changes these variables significantly.

  18. Bismuth generator method

    Science.gov (United States)

    Bray, L.A.; DesChane, J.R.

    1998-05-05

    A method is described for separating {sup 213}Bi from a solution of radionuclides wherein the solution contains a concentration of the chloride ions and hydrogen ions adjusted to allow the formation of a chloride complex. The solution is then brought into contact with an anion exchange resin, whereupon {sup 213}Bi is absorbed from the solution and adhered onto the anion exchange resin in the chloride complex. Other non-absorbing radionuclides such as {sup 225}Ra, {sup 225}Ac, and {sup 221}Fr, along with HCl are removed from the anion exchange resin with a scrub solution. The {sup 213}Bi is removed from the anion exchange resin by washing the anion exchange resin with a stripping solution free of chloride ions and with a reduced hydrogen ion concentration which breaks the chloride anionic complex, releasing the {sup 213}Bi as a cation. In a preferred embodiment of the present invention, the anion exchange resin is provided as a thin membrane, allowing for extremely rapid adherence and stripping of the {sup 213}Bi. A preferred stripping solution for purification of {sup 213}Bi for use in medical applications includes sodium acetate, pH 5.5. A protein conjugated with bifunctional chelating agents in vivo with the NaOAc receives the {sup 213}Bi as it is being released from the anion exchange resin. 10 figs.

  19. NCSX Plasma Heating Methods

    International Nuclear Information System (INIS)

    Kugel, H.W.; Spong, D.; Majeski, R.; Zarnstorff, M.

    2003-01-01

    The NCSX (National Compact Stellarator Experiment) has been designed to accommodate a variety of heating systems, including ohmic heating, neutral-beam injection, and radio-frequency. Neutral beams will provide one of the primary heating methods for NCSX. In addition to plasma heating, beams are also expected to provide a means for external control over the level of toroidal plasma rotation velocity and its profile. The plan is to provide 3 MW of 50 keV balanced neutral-beam tangential injection with pulse lengths of 500 msec for initial experiments, and to be upgradeable to pulse lengths of 1.5 sec. Subsequent upgrades will add 3 MW of neutral-beam injection. This Chapter discusses the NCSX neutral-beam injection requirements and design issues, and shows how these are provided by the candidate PBX-M (Princeton Beta Experiment-Modification) neutral-beam injection system. In addition, estimations are given for beam-heating efficiencies, scaling of heating efficiency with machine size an d magnetic field level, parameter studies of the optimum beam-injection tangency radius and toroidal injection location, and loss patterns of beam ions on the vacuum chamber wall to assist placement of wall armor and for minimizing the generation of impurities by the energetic beam ions. Finally, subsequent upgrades could add an additional 6 MW of radio-frequency heating by mode-conversion ion-Bernstein wave (MCIBW) heating, and if desired as possible future upgrades, the design also will accommodate high-harmonic fast-wave and electron-cyclotron heating. The initial MCIBW heating technique and the design of the radio-frequency system lend themselves to current drive, so that if current drive became desirable for any reason only minor modifications to the heating system described here would be needed. The radio-frequency system will also be capable of localized ion heating (bulk or tail), and possibly ion-Bernstein-wave-generated sheared flows

  20. NCSX Plasma Heating Methods

    International Nuclear Information System (INIS)

    Kugel, H.W.; Spong, D.; Majeski, R.; Zarnstorff, M.

    2008-01-01

    The National Compact Stellarator Experiment (NCSX) has been designed to accommodate a variety of heating systems, including ohmic heating, neutral beam injection, and radio-frequency (rf). Neutral beams will provide one of the primary heating methods for NCSX. In addition to plasma heating, neutral beams are also expected to provide a means for external control over the level of toroidal plasma rotation velocity and its profile. The experimental plan requires 3 MW of 50-keV balanced neutral beam tangential injection with pulse lengths of 500 ms for initial experiments, to be upgradeable to pulse lengths of 1.5 s. Subsequent upgrades will add 3MW of neutral beam injection (NBI). This paper discusses the NCSX NBI requirements and design issues and shows how these are provided by the candidate PBX-M NBI system. In addition, estimations are given for beam heating efficiencies, scaling of heating efficiency with machine size and magnetic field level, parameter studies of the optimum beam injection tangency radius and toroidal injection location, and loss patterns of beam ions on the vacuum chamber wall to assist placement of wall armor and for minimizing the generation of impurities by the energetic beam ions. Finally, subsequent upgrades could add an additional 6 MW of rf heating by mode conversion ion Bernstein wave (MCIBW) heating, and if desired as possible future upgrades, the design also will accommodate high-harmonic fast-wave and electron cyclotron heating. The initial MCIBW heating technique and the design of the rf system lend themselves to current drive, so if current drive became desirable for any reason, only minor modifications to the heating system described here would be needed. The rf system will also be capable of localized ion heating (bulk or tail), and possibly IBW-generated sheared flows

  1. NCSX Plasma Heating Methods

    Energy Technology Data Exchange (ETDEWEB)

    Kugel, H. W.; Spong, D.; Majeski, R.; Zarnstorff, M.

    2008-01-18

    The National Compact Stellarator Experiment (NCSX) has been designed to accommodate a variety of heating systems, including ohmic heating, neutral beam injection, and radio-frequency (rf). Neutral beams will provide one of the primary heating methods for NCSX. In addition to plasma heating, neutral beams are also expected to provide a means for external control over the level of toroidal plasma rotation velocity and its profile. The experimental plan requires 3 MW of 50-keV balanced neutral beam tangential injection with pulse lengths of 500 ms for initial experiments, to be upgradeable to pulse lengths of 1.5 s. Subsequent upgrades will add 3MW of neutral beam injection (NBI). This paper discusses the NCSX NBI requirements and design issues and shows how these are provided by the candidate PBX-M NBI system. In addition, estimations are given for beam heating efficiencies, scaling of heating efficiency with machine size and magnetic field level, parameter studies of the optimum beam injection tangency radius and toroidal injection location, and loss patterns of beam ions on the vacuum chamber wall to assist placement of wall armor and for minimizing the generation of impurities by the energetic beam ions. Finally, subsequent upgrades could add an additional 6 MW of rf heating by mode conversion ion Bernstein wave (MCIBW) heating, and if desired as possible future upgrades, the design also will accommodate high-harmonic fast-wave and electron cyclotron heating. The initial MCIBW heating technique and the design of the rf system lend themselves to current drive, so if current drive became desirable for any reason, only minor modifications to the heating system described here would be needed. The rf system will also be capable of localized ion heating (bulk or tail), and possiblyIBW-generated sheared flows.

  2. Explorative methods in linear models

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    2004-01-01

    The author has developed the H-method of mathematical modeling that builds up the model by parts, where each part is optimized with respect to prediction. Besides providing with better predictions than traditional methods, these methods provide with graphic procedures for analyzing different feat...... features in data. These graphic methods extend the well-known methods and results of Principal Component Analysis to any linear model. Here the graphic procedures are applied to linear regression and Ridge Regression....

  3. Method Points: towards a metric for method complexity

    Directory of Open Access Journals (Sweden)

    Graham McLeod

    1998-11-01

    Full Text Available A metric for method complexity is proposed as an aid to choosing between competing methods, as well as in validating the effects of method integration or the products of method engineering work. It is based upon a generic method representation model previously developed by the author and adaptation of concepts used in the popular Function Point metric for system size. The proposed technique is illustrated by comparing two popular I.E. deliverables with counterparts in the object oriented Unified Modeling Language (UML. The paper recommends ways to improve the practical adoption of new methods.

  4. Equivalence between the Adomian decomposition method and a perturbation method

    Energy Technology Data Exchange (ETDEWEB)

    Sadat, H, E-mail: hamou.sadat@univ-poitiers.f [Institut PPRIME-CNRS-Universite de Poitiers-ENSMA UPR 3346, Departement Fluides, Thermique, Combustion, ESIP-Campus Sud 40, avenue du recteur Pineau, 86022 POITIERS Cedex (France)

    2010-10-15

    We show in this paper that the Adomian decomposition method is closely related to a perturbation method used to deal with some heat conduction problems. Three examples demonstrate that the obtained series are strictly identical.

  5. Dianhydrides, polyimides, methods of making each, and methods of use

    KAUST Repository

    Ma, Xiaohua

    2015-01-08

    Embodiments of the present disclosure provide for an aromatic dianhydride, a method of making an aromatic dianhydride, an aromatic dianhydride-based polyimide, a method of making an aromatic dianhydride-based polyimide, and the like.

  6. John Butcher and hybrid methods

    Science.gov (United States)

    Mehdiyeva, Galina; Imanova, Mehriban; Ibrahimov, Vagif

    2017-07-01

    As is known there are the mainly two classes of the numerical methods for solving ODE, which is commonly called a one and multistep methods. Each of these methods has certain advantages and disadvantages. It is obvious that the method which has better properties of these methods should be constructed at the junction of them. In the middle of the XX century, Butcher and Gear has constructed at the junction of the methods of Runge-Kutta and Adams, which is called hybrid method. Here considers the construction of certain generalizations of hybrid methods, with the high order of accuracy and to explore their application to solving the Ordinary Differential, Volterra Integral and Integro-Differential equations. Also have constructed some specific hybrid methods with the degree p ≤ 10.

  7. Catalysts, methods of making catalysts, and methods of use

    KAUST Repository

    Renard, Laetitia

    2014-03-06

    Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

  8. The Value of Mixed Methods Research: A Mixed Methods Study

    Science.gov (United States)

    McKim, Courtney A.

    2017-01-01

    The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

  9. Lectures on Monte Carlo methods

    CERN Document Server

    Madras, Neal

    2001-01-01

    Monte Carlo methods form an experimental branch of mathematics that employs simulations driven by random number generators. These methods are often used when others fail, since they are much less sensitive to the "curse of dimensionality", which plagues deterministic methods in problems with a large number of variables. Monte Carlo methods are used in many fields: mathematics, statistics, physics, chemistry, finance, computer science, and biology, for instance. This book is an introduction to Monte Carlo methods for anyone who would like to use these methods to study various kinds of mathemati

  10. Numerical Methods for Stochastic Computations A Spectral Method Approach

    CERN Document Server

    Xiu, Dongbin

    2010-01-01

    The first graduate-level textbook to focus on fundamental aspects of numerical methods for stochastic computations, this book describes the class of numerical methods based on generalized polynomial chaos (gPC). These fast, efficient, and accurate methods are an extension of the classical spectral methods of high-dimensional random spaces. Designed to simulate complex systems subject to random inputs, these methods are widely used in many areas of computer science and engineering. The book introduces polynomial approximation theory and probability theory; describes the basic theory of gPC meth

  11. Methods of respiratory system investigation

    International Nuclear Information System (INIS)

    Rozenshtraukh, L.C.; Rybakova, N.I.; Vinner, M.G.

    1987-01-01

    Different methods of chest organs investigation are discussed in detail: roentgenoscopy, roentgenography, tomography and others. A detailed roentgenologic semiotics of every method is presented, as well as their comparative evaluation

  12. Collect method of uranium hexafluoride

    International Nuclear Information System (INIS)

    Moura, S.C.; Bustillos, O.W.V.

    1991-01-01

    A collect method of uranium hexafluoride was designed, constructed and assembled in Analytical Laboratory from Instituto de Energia Atomica, Sao Paulo, Brazil. This method of collect is main for quality control of uranium hexafluoride. (author)

  13. Birth control - slow release methods

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/007555.htm Birth control - slow release methods To use the sharing features on this page, please enable JavaScript. Certain birth control methods contain man-made forms of hormones. ...

  14. Clostridium difficile: methods and protocols

    National Research Council Canada - National Science Library

    Mullany, Peter; Roberts, Adam P

    2010-01-01

    .... difficile research to describe the recently developed methods for studying the organism. These range from methods for isolation of the organism, molecular typing, genomics, genetic manipulation, and the use of animal models...

  15. Statistical methods for quality improvement

    National Research Council Canada - National Science Library

    Ryan, Thomas P

    2011-01-01

    ...."-TechnometricsThis new edition continues to provide the most current, proven statistical methods for quality control and quality improvementThe use of quantitative methods offers numerous benefits...

  16. [Physical methods and molecular biology].

    Science.gov (United States)

    Serdiuk, I N

    2009-01-01

    The review is devoted to the description of the current state of physical and chemical methods used for studying the structural and functional bases of living processes. Special attention is focused on the physical methods that have opened a new page in the research of the structure of biological macromolecules. They include primarily the methods of detecting and manipulating single molecules using optical and magnetic traps. New physical methods, such as two-dimensional infrared spectroscopy, fluorescence correlation spectroscopy and magnetic resonance microscopy are also analyzed briefly in the review. The path that physics and biology have passed for the latest 55 years shows that there is no single method providing all necessary information on macromolecules and their interactions. Each method provides its space-time view of the system. All physical methods are complementary. It is just complementarity that is the fundamental idea justifying the existence in practice of all physical methods, whose description is the aim of the review.

  17. Mixed methods research for TESOL

    CERN Document Server

    Brown, James; Farr, Fiona

    2014-01-01

    Defining and discussing the relevance of theoretical and practical issues involved in mixed methods research. Covering the basics of research methodology, this textbook shows you how to choose and combine quantitative and qualitative research methods to b

  18. COMPUTER METHODS OF GENETIC ANALYSIS.

    Directory of Open Access Journals (Sweden)

    A. L. Osipov

    2017-02-01

    Full Text Available The basic statistical methods used in conducting the genetic analysis of human traits. We studied by segregation analysis, linkage analysis and allelic associations. Developed software for the implementation of these methods support.

  19. International Conference eXtended Discretization MethodS

    CERN Document Server

    Benvenuti, Elena

    2016-01-01

    This book gathers selected contributions on emerging research work presented at the International Conference eXtended Discretization MethodS (X-DMS), held in Ferrara in September 2015. It highlights the most relevant advances made at the international level in the context of expanding classical discretization methods, like finite elements, to the numerical analysis of a variety of physical problems. The improvements are intended to achieve higher computational efficiency and to account for special features of the solution directly in the approximation space and/or in the discretization procedure. The methods described include, among others, partition of unity methods (meshfree, XFEM, GFEM), virtual element methods, fictitious domain methods, and special techniques for static and evolving interfaces. The uniting feature of all contributions is the direct link between computational methodologies and their application to different engineering areas.

  20. Mining method selection by integrated AHP and PROMETHEE method.

    Science.gov (United States)

    Bogdanovic, Dejan; Nikolic, Djordje; Ilic, Ivana

    2012-03-01

    Selecting the best mining method among many alternatives is a multicriteria decision making problem. The aim of this paper is to demonstrate the implementation of an integrated approach that employs AHP and PROMETHEE together for selecting the most suitable mining method for the "Coka Marin" underground mine in Serbia. The related problem includes five possible mining methods and eleven criteria to evaluate them. Criteria are accurately chosen in order to cover the most important parameters that impact on the mining method selection, such as geological and geotechnical properties, economic parameters and geographical factors. The AHP is used to analyze the structure of the mining method selection problem and to determine weights of the criteria, and PROMETHEE method is used to obtain the final ranking and to make a sensitivity analysis by changing the weights. The results have shown that the proposed integrated method can be successfully used in solving mining engineering problems.

  1. The Hertz's Method of Superpotential

    Science.gov (United States)

    Bleyer, U.; Treder, H.-J.

    The Method of HERTZ consists in the solution of the electromagnetic field equations by the help of a superpotential. We analyse the applicability of this method to more general field equations.Translated AbstractDie Hertzsche Methode der SuperpotentialeGemäß HERTZ können die Feldgleichungen der Elektrodynamik mit Hilfe eines Superpotentials gelöst werden. Wir untersuchen im folgenden die Anwendbarkeit dieser Methode auf allgemeinere Feldgleichungen.

  2. Physics-compatible numerical methods

    OpenAIRE

    Barry, Koren; Abgrall, Remi; Pavel, Bochev; Jason, Frank; Blair, Perrot

    2014-01-01

    International audience; Physics-compatible numerical methods are methods that aim to preserve key mathematical and physical properties of continuum physics models in their finite-dimensional algebraic representations. They include methods which preserve properties such as energy, monotonicity, maximum principles, symmetries, and involutions of the continuum models. Examples are mimetic methods for spatial discretizations, variational and geometric integrators, conservative finite-volume and f...

  3. Bayesian methods for data analysis

    CERN Document Server

    Carlin, Bradley P.

    2009-01-01

    Approaches for statistical inference Introduction Motivating Vignettes Defining the Approaches The Bayes-Frequentist Controversy Some Basic Bayesian Models The Bayes approach Introduction Prior Distributions Bayesian Inference Hierarchical Modeling Model Assessment Nonparametric Methods Bayesian computation Introduction Asymptotic Methods Noniterative Monte Carlo Methods Markov Chain Monte Carlo Methods Model criticism and selection Bayesian Modeling Bayesian Robustness Model Assessment Bayes Factors via Marginal Density Estimation Bayes Factors

  4. Some current methods to represent the heterogeneity of natural media in hydrogeology

    Science.gov (United States)

    de Marsily, G.; Delay, F.; Teles, V.; Schafmeister, M. T.

    We have known for a long time that the material properties of the subsurface are highly variable in space. We have learned that this variability is due to the extreme complexity and variation with time of processes responsible for the formation of the earth's crust, from plate tectonics to erosion, sediment transport, and deposition, as well as to mechanical, climatic, and diagenetic effects. As geologists, we learned how to "read" this complex history in the rocks and how to try to extrapolate in space what we have understood. As physicists, we then learned that to study flow processes in such media we must apply the laws of continuum mechanics. As mathematicians using analytical methods, we learned that we must simplify by dividing this complex continuum into a small number of units, such as aquifers and aquitards, and describe their properties by (constant) equivalent values. In recent years, as numerical modelers, we learned that we now have the freedom to "discretize" this complex reality and describe it as an ensemble of small homogeneous boxes of continuous media, each of which can have different properties. How do we use this freedom? Is there a need for it? If the answer is "yes," how can we assign different rock-property values to thousands or even millions of such little boxes in our models, to best represent reality, and include confidence levels for each selected rock property? As a tribute to Professor Eugene S. Simpson, with whom the first author of this paper often discussed these questions, we present an overview of three techniques that focus on one property, the rock permeability. We explain the motivation for describing spatial variability and illustrate how to do so by the geostatistical method, the Boolean method, and the genetic method. We discuss their advantages and disadvantages and indicate their present state of development. This is an active field of research and space is limited, so the review is certain to be incomplete, but we hope

  5. Modèle analytique pour la résistance thermique due à des contacts circulaires mobiles multiples à la surface d'un solide revêtu

    Science.gov (United States)

    Baïri, Abderrahmane

    2003-08-01

    The heat transfer at the interface of two solids in sliding/rolling contact depends on the constriction phenomenon which occurs at the vicinity of asperities. In order to study this problem, the micro-contacts are represented by multiple moving circular heat sources on the surface of a body. The studied body is constituted of a substrate and a surface coating. The thermal constriction resistance due to those contacts is determined analytically in this paper. The solution is developed by using the integral Fourier transforms, and it is valid regardless of the velocity and the relative contact size values. To cite this article: A. Baïri, C. R. Mecanique 331 (2003).

  6. Reactivity of polycyclic aromatic hydrocarbons (PAHs) adsorbed on atmospheric particles: analytical, kinetic and mechanistic developments; Reactivite des hydrocarbures aromatiques polycycliques (HAP) adsorbes sur des particules carbonees d'interet atmospherique: developpements analytique, cinetique et mecanistique

    Energy Technology Data Exchange (ETDEWEB)

    Esteve, W.

    2002-07-01

    The aim of this work is to study the oxidation in heterogeneous phase of the polycyclic aromatic hydrocarbons (PAHs) present in air. The becoming of the PAHs-particulates is, indeed, badly known. It is then essential to evaluate their reactivity with air oxidants. Two aspects have been approached; the degradation velocities by OH, NO and NO{sub 2} have at first been determined in order to estimate the residence time of the PAHs in air, then the research and the identification of oxidation products have been carried out. The kinetics of the oxidation reactions of the graphite adsorbed PAHs by OH and NO{sub x} have been measured. The reactivity of these PAHs has then been compared to those of the PAHs-particulates coming from the combustion of diesel engines. In the second part of this work, the PAHs oxidation products formed at the surface of the graphite particles by reaction with NO{sub 2} and/or OH have been identified and formation reactional mechanisms revealing probable oxidative chains have been proposed. (O.M.)

  7. Mise au point de modèles d'oxydation et de techniques analytiques spécifiques des phospholipides et de leurs produits de dégradation dans les aliments fonctionnels

    OpenAIRE

    Zhou , Li

    2012-01-01

    Among the numerous beneficial effects of phospholipides can highlight their role in protecting the cardiovascular system and improving memory and learning. These effects can be partially explained by the fact that phospholipids are rich in polyunsaturated (eicosapentaenoic and docosahexaenoic acids) or essential fatty acids. Thus, it is very significant to explore potential food sources containing polyunsaturated rich phospholipids for the development new food products supplemented with phosp...

  8. Analytical, microbiological and eco-toxicological characterization of former polluted gas-work sites; Caracterisation analytique, microbiologique et ecotoxicologique de terres polluees d'anciennes usines a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Haeseler, F.

    1999-12-17

    The present work was done on representative soil samples originating from different former gas-work sites and contaminated with poly-aromatic hydrocarbons (PAH). Because of their genotoxicity these compounds are considered as the major pollutants. A detailed analytical characterization of the polluting organic matter present in these soils shows that the 16 PAH of the US-EPA priority pollutants list (3 to 6 %) are systematically associated to other PAH (7 to 10 %) and to an organic matter extractable with organic solvents (10 to 15%), but also to a non-extractable heavy organic matter (60 to 75 %). The results show that these soils are polluted with PAH-containing coal tars generated by the industrial coal pyrolysis process of gas manufacturing. All the studied soils present a microflora able to degrade all the PAH from the US-EPA list. The main factor limiting the biodegradation rates obtained by biological soil treatment is the lack of accessibility of PAH. This is due to the presence of heavy organic matter of coal tar acting like a trap for the associated PAH. The soils which have not undergone natural attenuation present an important leaching capacity for PAH. This leaching capacity is strongly reduced after even a limited biological treatment. Bacterial tests performed on leachates of biologically treated soils show that they no longer present any detectable acute toxicity or genotoxicity. (author)

  9. Sol-gel process preparation and evaluation of the analytical performances of an hydrazine specific chemical sensor; Preparation par procede sol-gel et evaluation des performances analytiques d`un capteur chimique specifique de l`hydrazine

    Energy Technology Data Exchange (ETDEWEB)

    Gojon, C

    1996-12-01

    The realisation of optical fibers active chemical collector to analyze hydrazine in line, in the spent fuel reprocessing process is the subject of this work. The p.dimethyl-amino-benzaldehyde has been chosen as reagent for its chemical and optical properties. 186 refs.

  10. About utility of quasistatic methods

    International Nuclear Information System (INIS)

    Watson, F.V.

    1985-01-01

    It is demonstrated by model problem of the spatial kinetic that quasistatic methods do not have good performance comparing with usual implicit methods combined with the spectrum displacement. A theoretical discussion about two methodologies makes clearly visible the insufficient behavior of quasistatic methods. (M.C.K.) [pt

  11. Understanding Creativity Methods in Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2017-01-01

    framework, we use these key concepts to analyze three recognized creativity methods that we have often used ourselves: Inspiration Card Workshops, Fictional Inquiry, and Extreme Characters. Our analytical framework expands current categorizations of methods and offers new insight into how creativity methods...

  12. Greener Methods for Aspirin Synthesis

    OpenAIRE

    Barilone, Jessica

    2013-01-01

    In this semester long study, I used microwave irradiation to synthesize aspirin. I compared this method to a traditional method that utilizes a strong acid. I compared the percent yield and the purity of the methods to pure aspirin. 

  13. Methods of analyzing crude oil

    Energy Technology Data Exchange (ETDEWEB)

    Cooks, Robert Graham; Jjunju, Fred Paul Mark; Li, Anyin; Rogan, Iman S.

    2017-08-15

    The invention generally relates to methods of analyzing crude oil. In certain embodiments, methods of the invention involve obtaining a crude oil sample, and subjecting the crude oil sample to mass spectrometry analysis. In certain embodiments, the method is performed without any sample pre-purification steps.

  14. Chemical control methods and tools

    Science.gov (United States)

    Steven Manning; James. Miller

    2011-01-01

    After determining the best course of action for control of an invasive plant population, it is important to understand the variety of methods available to the integrated pest management professional. A variety of methods are now widely used in managing invasive plants in natural areas, including chemical, mechanical, and cultural control methods. Once the preferred...

  15. Methods of making textured catalysts

    Science.gov (United States)

    Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

    2010-08-17

    A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

  16. Formal Methods in Knowledge Engineering

    NARCIS (Netherlands)

    Harmelen, van F.A.H.; Fensel, D.

    1995-01-01

    This paper presents a general discussion of the role of formal methods in Knowledge Engineering. We give an historical account of the development of the field of Knowledge Engineering towards the use of formal methods. Subsequently, we discuss the pro's and cons of formal methods. We do this by

  17. Pixe method as microanalytical instrument

    International Nuclear Information System (INIS)

    Tabacniks, M.H.

    1986-02-01

    The PIXE method (Particle Induced X-Ray Emission) as analytical method presenting the evolution, the theoretical fundaments, the detection limit, the optimization for operational conditions is evaluated. The applications of the method to air pollution control and aerosol studies in regions such as Antartic, Amazon and other regions are analysed. (M.C.K.) [pt

  18. Activity based costing (ABC Method

    Directory of Open Access Journals (Sweden)

    Prof. Ph.D. Saveta Tudorache

    2008-05-01

    Full Text Available In the present paper the need and advantages are presented of using the Activity BasedCosting method, need arising from the need of solving the information pertinence issue. This issue has occurreddue to the limitation of classic methods in this field, limitation also reflected by the disadvantages ofsuch classic methods in establishing complete costs.

  19. Methods of English language teaching

    OpenAIRE

    Козелецька, І.С.

    2013-01-01

    The grammar translation method instructs students in grammar, and provides vocabulary with direct translations to memorize. It was the predominant method in Europe in the 19th century. Most instructors now acknowledge that this method is ineffective by itself. It is now most commonly used in the traditional instruction of the classical languages.

  20. Indirect methods in nuclear astrophysics

    International Nuclear Information System (INIS)

    Bertulani, C.A.; Shubhchintak; Mukhamedzhanov, A.; Kadyrov, A. S.; Kruppa, A.; Pang, D. Y.

    2016-01-01

    We discuss recent developments in indirect methods used in nuclear astrophysics to determine the capture cross sections and subsequent rates of various stellar burning processes, when it is difficult to perform the corresponding direct measurements. We discuss in brief, the basic concepts of Asymptotic Normalization Coefficients, the Trojan Horse Method, the Coulomb Dissociation Method, (d,p), and charge-exchange reactions. (paper)

  1. Safety training for working youth: Methods used versus methods wanted.

    Science.gov (United States)

    Zierold, Kristina M

    2016-04-07

    Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

  2. Factorization method of quadratic template

    Science.gov (United States)

    Kotyrba, Martin

    2017-07-01

    Multiplication of two numbers is a one-way function in mathematics. Any attempt to distribute the outcome to its roots is called factorization. There are many methods such as Fermat's factorization, Dixońs method or quadratic sieve and GNFS, which use sophisticated techniques fast factorization. All the above methods use the same basic formula differing only in its use. This article discusses a newly designed factorization method. Effective implementation of this method in programs is not important, it only represents and clearly defines its properties.

  3. Excitation Methods for Bridge Structures

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, C.R.; Duffy, T.A.; Cornwell, P.J.; Doebling, S.W.

    1999-02-08

    This paper summarizes the various methods that have been used to excited bridge structures during dynamic testing. The excitation methods fall into the general categories of ambient excitation methods and measured-input excitation methods. During ambient excitation the input to the bridge is not directly measured. In contrast, as the category label implies, measured-input excitations are usually applied at a single location where the force input to the structure can be monitored. Issues associated with using these various types of measurements are discussed along with a general description of the various excitation methods.

  4. Soft tissue tumors - imaging methods

    International Nuclear Information System (INIS)

    Arlart, I.P.

    1985-01-01

    Soft Tissue Tumors - Imaging Methods: Imaging methods play an important diagnostic role in soft tissue tumors concerning a preoperative evaluation of localization, size, topographic relationship, dignity, and metastatic disease. The present paper gives an overview about diagnostic methods available today such as ultrasound, thermography, roentgenographic plain films and xeroradiography, radionuclide methods, computed tomography, lymphography, angiography, and magnetic resonance imaging. Besides sonography particularly computed tomography has the most important diagnostic value in soft tissue tumors. The application of a recently developed method, the magnetic resonance imaging, cannot yet be assessed in its significance. (orig.) [de

  5. Method of making alkyl esters

    Science.gov (United States)

    Elliott, Brian

    2010-09-14

    Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

  6. Compositions, antibodies, asthma diagnosis methods, and methods for preparing antibodies

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Hongjun; Zangar, Richard C.

    2017-01-17

    Methods for preparing an antibody are provided with the method including incorporating 3-bromo-4-hydroxy-benzoic acid into a protein to form an antigen, immunizing a mammalian host with the antigen, and recovering an antibody having an affinity for the antigen from the host. Antibodies having a binding affinity for a monohalotyrosine are provided as well as composition comprising an antibody bound with monohalotyrosine. Compositions comprising a protein having a 3-bromo-4-hydroxy-benzoic acid moiety are also provided. Methods for evaluating the severity of asthma are provide with the methods including analyzing sputum of a patient using an antibody having a binding affinity for monohalotyrosine, and measuring the amount of antibody bound to protein. Methods for determining eosinophil activity in bodily fluid are also provided with the methods including exposing bodily fluid to an antibody having a binding affinity for monohalotyrosine, and measuring the amount of bound antibody to determine the eosinophil activity.

  7. User interface inspection methods a user-centered design method

    CERN Document Server

    Wilson, Chauncey

    2014-01-01

    User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

  8. Some direct methods in electromagnetics. Quelques methodes directes en electromagnetisme

    Energy Technology Data Exchange (ETDEWEB)

    Gay, J. (CEA Centre d' Etudes Scientifiques et Techniques d' Aquitaine, 33 - Le Barp (France)); Scheurer, B. (CEA Centre d' Etudes de Limeil, 94 - Villeneuve-Saint-Georges (France))

    1991-12-01

    At the CEA/DAM, various studies including ones aimed at researching for low observability have stimulated the development of electromagnetics computer codes. For this purpose both mathematical and numerical methods have been devised. Two of them are described in this paper. The first approach consists of enlarging to electromagnetics problems some ideas and methods issued from mechanics and structural design. A flexible computer code covering a wide range of applications has been developed. The second approach is explicitly concerned with axisymmetric bodies and low observability problems. Boundary element methods, as well as mixed boundary element and finite element methods are briefly described and exemplified. (author). 21 refs., 13 figs., 3 insets.

  9. The Monte Carlo method the method of statistical trials

    CERN Document Server

    Shreider, YuA

    1966-01-01

    The Monte Carlo Method: The Method of Statistical Trials is a systematic account of the fundamental concepts and techniques of the Monte Carlo method, together with its range of applications. Some of these applications include the computation of definite integrals, neutron physics, and in the investigation of servicing processes. This volume is comprised of seven chapters and begins with an overview of the basic features of the Monte Carlo method and typical examples of its application to simple problems in computational mathematics. The next chapter examines the computation of multi-dimensio

  10. Evaluation of Kjeldahl digestion method

    International Nuclear Information System (INIS)

    Amin, M.; Flowers, T.H.

    2004-01-01

    The evaluation of the Kjeldahl digestion method was investigated by comparing measured values of total nitrogen, phosphorus and potassium using three salt and catalyst mixture in Standard Kjeldahl digestion method and Salicyclic acid Modification method with certified values of plant material as well as comparison was made for determination of total nitrogen from steam distillation method verses the Technicon Auto-analyzer, and phosphorus Ascorbic acid/Molybdate method verses Molybdate/ Metavanadate method on the Technicon Auto-Analyzer. The 1 g salt/catalyst mixture recovered less nitrogen than the 2.5 g in the standard Kjeldahl method due to the lower temperature and incomplete digestion in both plant and soil samples. The 2.5 g catalyst mixture partially recovered nitrate in the standard Kjeldahl method and the salicylic acid modification fail to recover all over nitrate in plant material. Use of 2.5 g salt catalyst mixture and selenium appears to promote nitrogen losses in salicylic acid modification method but not in the standard Kjeldahl method of digestion for soil samples. No interference of selenium or copper was observed in Nitrogen and Phosphorus on calorimetric determination. The standard Kjeldahl method with 2.5 g of salt/catalyst mixture of sodium sulphate copper sulphate (10:1) in 5 ml sulfuric acid were found suitable for determination of total Nitrogen, phosphorus and potassium. The steam distillation and the Technicon Auto-Analyzer technique measure similar amounts of ammonium nitrogen. However, the Technicon Auto analyzer technique is easier, rapid, higher degree of reproducibility, precise, accurate, reliable and free from human error. The amount of phosphorus measured by the Ascorbic acid/Molybdate method was more accurate than by the Molybdate/Metavanadate method on Technicon Auto-Analyzer. (author)

  11. Multivariate methods for particle identification

    CERN Document Server

    Visan, Cosmin

    2013-01-01

    The purpose of this project was to evaluate several MultiVariate methods in order to determine which one, if any, offers better results in Particle Identification (PID) than a simple n$\\sigma$ cut on the response of the ALICE PID detectors. The particles considered in the analysis were Pions, Kaons and Protons and the detectors used were TPC and TOF. When used with the same input n$\\sigma$ variables, the results show similar perfoance between the Rectangular Cuts Optimization method and the simple n$\\sigma$ cuts. The method MLP and BDT show poor results for certain ranges of momentum. The KNN method is the best performing, showing similar results for Pions and Protons as the Cuts method, and better results for Kaons. The extension of the methods to include additional input variables leads to poor results, related to instabilities still to be investigated.

  12. The Plastic Tension Field Method

    DEFF Research Database (Denmark)

    Hansen, Thomas

    2005-01-01

    . The emphasis is attached to the presentation of a design method based on the diagonal tension field theory. Also, how to determine the load-carrying capacity of a given steel plate girder with transverse web stiffeners, is briefly presented. The load-carrying capacity may be predicted by applying both...... method. The method is based on the theory of plasticity and is analogous to the so-called diagonal compression field method developed for reinforced concrete beams with transverse stirrups, which is adopted in the common European concrete code (Eurocode 2). Many other theories have been developed......, but the method presented differs from these theories by incorporating the strength of the transverse stiffeners and by the assumption that the tensile bands may pass the transverse stiffeners, which often is observed in tests. Other methods have only dealt with a single web field between two stiffeners...

  13. Shuttle onboard IMU alignment methods

    Science.gov (United States)

    Henderson, D. M.

    1976-01-01

    The current approach to the shuttle IMU alignment is based solely on the Apollo Deterministic Method. This method is simple, fast, reliable and provides an accurate estimate for the present cluster to mean of 1,950 transformation matrix. If four or more star sightings are available, the application of least squares analysis can be utilized. The least squares method offers the next level of sophistication to the IMU alignment solution. The least squares method studied shows that a more accurate estimate for the misalignment angles is computed, and the IMU drift rates are a free by-product of the analysis. Core storage requirements are considerably more; estimated 20 to 30 times the core required for the Apollo Deterministic Method. The least squares method offers an intermediate solution utilizing as much data that is available without a complete statistical analysis as in Kalman filtering.

  14. Microencapsulation and Electrostatic Processing Method

    Science.gov (United States)

    Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

    2000-01-01

    Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

  15. Mapping Mixed Methods Research: Methods, Measures, and Meaning

    Science.gov (United States)

    Wheeldon, J.

    2010-01-01

    This article explores how concept maps and mind maps can be used as data collection tools in mixed methods research to combine the clarity of quantitative counts with the nuance of qualitative reflections. Based on more traditional mixed methods approaches, this article details how the use of pre/post concept maps can be used to design qualitative…

  16. Adaptive Integral Method for Higher Order Method of Moments

    DEFF Research Database (Denmark)

    Kim, Oleksiy S.; Meincke, Peter

    2008-01-01

    The adaptive integral method (AIM) is combined with the higher order method of moments (MoM) to solve integral equations. The technique takes advantage of the low computational complexity and memory requirements of the AIM and the reduced number of unknowns and higher order convergence of higher...

  17. The WST method, a fracture mechanics test method for FRC

    DEFF Research Database (Denmark)

    Lofgren, I.; Stang, Henrik; Olesen, John Forbes

    2008-01-01

    The applicability of the wedge-splitting test method (WST), for determining fracture properties of fibre-reinforced concrete, is discussed. Experimental results, using the WST method, are compared with results from uniaxial tension tests (UTT) and three-point bending tests (3PBT) for five differe...

  18. Methods of forming CIGS films

    Science.gov (United States)

    Mansfield, Lorelle; Ramanathan, Kannan

    2017-09-19

    Methods for forming CIGS films are provided. According to an aspect of the invention, a method of forming a CIGS film includes a precursor step, which includes simultaneously evaporating Cu, In, Ga, Se, and Sb onto a substrate. The Se is incident on the substrate at a rate of at least 20 .ANG./s. The method also includes a selenization step, which includes evaporating Se over the substrate after the precursor step.

  19. Identification methods of irradiated food

    International Nuclear Information System (INIS)

    Raffi, J.J.

    1991-01-01

    After a general review of the different possible methods, the stress is put upon the ones close to application: electron spin resonance, thermoluminescence and method of lipids. The problem of the specificity of each method is discussed (proof or presumption): they are then placed in the context of the programme of identification of irradiated foods just co-organized by the author with the Community Bureau of Reference (CEC) [fr

  20. The Source Equivalence Acceleration Method

    International Nuclear Information System (INIS)

    Everson, Matthew S.; Forget, Benoit

    2015-01-01

    Highlights: • We present a new acceleration method, the Source Equivalence Acceleration Method. • SEAM forms an equivalent coarse group problem for any spatial method. • Equivalence is also formed across different spatial methods and angular quadratures. • Testing is conducted using OpenMOC and performance is compared with CMFD. • Results show that SEAM is preferable for very expensive transport calculations. - Abstract: Fine-group whole-core reactor analysis remains one of the long sought goals of the reactor physics community. Such a detailed analysis is typically too computationally expensive to be realized on anything except the largest of supercomputers. Recondensation using the Discrete Generalized Multigroup (DGM) method, though, offers a relatively cheap alternative to solving the fine group transport problem. DGM, however, suffered from inconsistencies when applied to high-order spatial methods. While an exact spatial recondensation method was developed and provided full spatial consistency with the fine group problem, this approach substantially increased memory requirements for realistic problems. The method described in this paper, called the Source Equivalence Acceleration Method (SEAM), forms a coarse-group problem which preserves the fine-group problem even when using higher order spatial methods. SEAM allows recondensation to converge to the fine-group solution with minimal memory requirements and little additional overhead. This method also provides for consistency when using different spatial methods and angular quadratures between the coarse group and fine group problems. SEAM was implemented in OpenMOC, a 2D MOC code developed at MIT, and its performance tested against Coarse Mesh Finite Difference (CMFD) acceleration on the C5G7 benchmark problem and on a 361 group version of the problem. For extremely expensive transport calculations, SEAM was able to outperform CMFD, resulting in speed-ups of 20–45 relative to the normal power

  1. Testing framework for compression methods

    OpenAIRE

    Štoček, Ondřej

    2008-01-01

    There are many algorithms for data compression. These compression methods often achieve different compression rate and also use computer resources differently. In practice a combination of compression is usually used instead of standalone compression methods. The software tool can be evolved, where we can easily combine existing compression methods to new one and test it consequently. Main goal of this work is to propound such tool and implement it. Further goal is to implement basic library ...

  2. Chebyshev and Fourier spectral methods

    CERN Document Server

    Boyd, John P

    2001-01-01

    Completely revised text focuses on use of spectral methods to solve boundary value, eigenvalue, and time-dependent problems, but also covers Hermite, Laguerre, rational Chebyshev, sinc, and spherical harmonic functions, as well as cardinal functions, linear eigenvalue problems, matrix-solving methods, coordinate transformations, methods for unbounded intervals, spherical and cylindrical geometry, and much more. 7 Appendices. Glossary. Bibliography. Index. Over 160 text figures.

  3. Regression methods for medical research

    CERN Document Server

    Tai, Bee Choo

    2013-01-01

    Regression Methods for Medical Research provides medical researchers with the skills they need to critically read and interpret research using more advanced statistical methods. The statistical requirements of interpreting and publishing in medical journals, together with rapid changes in science and technology, increasingly demands an understanding of more complex and sophisticated analytic procedures.The text explains the application of statistical models to a wide variety of practical medical investigative studies and clinical trials. Regression methods are used to appropriately answer the

  4. Teaching methods in PE teaching

    OpenAIRE

    Šekeljić, Goran V.; Stamatović, Milovan V.

    2016-01-01

    The methods used in teaching physical education, as well as in every other very specific teaching area, have their own uniqueness and enormous importance in teaching. In the last fifty years literature showed many different methods systematized by several different criteria. Some were just taken from general didactics, some were tailored to the needs of physical education classes, and a few new ones were discovered. The special value of this work is that the existing methods are supplemented ...

  5. Quantitative Methods for Teaching Review

    OpenAIRE

    Irina Milnikova; Tamara Shioshvili

    2011-01-01

    A new method of quantitative evaluation of teaching processes is elaborated. On the base of scores data, the method permits to evaluate efficiency of teaching within one group of students and comparative teaching efficiency in two or more groups. As basic characteristics of teaching efficiency heterogeneity, stability and total variability indices both for only one group and for comparing different groups are used. The method is easy to use and permits to rank results of teaching review which...

  6. METHODS OF TEACHING ISLAMIC FIQH

    OpenAIRE

    Muhammad Jarir

    2013-01-01

    This paper examined the most important methods used in the teaching of Islamic fiqh at the university level. The paper identified two types of methods and highlighted their advantages and disadvantages. The study particularly highlighted the Islamic perception of the methods and the optimal characteristics of a fiqh instructor. The paper concluded with a number of suggestion and recommendation that’s my correct the course of university teaching of Islamic fiqh. The paper mainly calls for the ...

  7. Qualitative methods in workplace learning

    OpenAIRE

    Fabritius, Hannele

    2015-01-01

    Methods of learning in the workplace will be introduced. The methods are connect to competence development and to the process of conducting development discussions in a dialogical way. The tools developed and applied are a fourfold table, a cycle of work identity, a plan of personal development targets, a learning meeting and a learning map. The methods introduced will aim to better learning at work.

  8. System Approach in RIPRAN Method

    Directory of Open Access Journals (Sweden)

    Branislav Lacko

    2017-06-01

    Full Text Available The article describes reasons, principles for design, structure and using of RIPRAN method (Risk Project Analysis for risk project analysis. The RIPRAN method is used to identify, quantify risks, and design proposals that reduce risk in the project to increase the likelihood of successful completion of the project. The method uses a system and process approach to risk analysis and respects international ISO standards that recommend how to perform a high‑quality risk analysis of the project. The method has been incorporated into the national standard of the Czech Republic among the recommended knowledge for certified project managers. The third version of the method is available. The method is included in teaching at many universities in the Czech Republic, trained by a number of training firms and used by firms to analyse the risks of corporate projects or by various risk analysis institutions for projects funded by the EU structural funds. The aim of the article is to inform about the RIPRAN method. At the same time, the paper points out that the method describes the procedure for risk analysis of the project and presents the benefits of RIPRAN application. The description of a system approach application when designing the RIPRAN method serves as an example of a system approach to risk engineering.

  9. Effectiveness of Family Planning Methods

    Science.gov (United States)

    ... per 100 women in a year Effectiveness of Family Planning Methods Implant Reversible Intrauterine Device (IUD) Permanent Male Sterilization Female Sterilization (Vasectomy) (Abdominal, Laparoscopic, Hysteroscopic) 0.05 %* ...

  10. Some direct methods in electromagnetics

    International Nuclear Information System (INIS)

    Gay, J.; Scheurer, B.

    1991-01-01

    At the CEA/DAM, various studies including ones aimed at researching for low observability have stimulated the development of electromagnetics computer codes. For this purpose both mathematical and numerical methods have been devised. Two of them are described in this paper. The first approach consists of enlarging to electromagnetics problems some ideas and methods issued from mechanics and structural design. A flexible computer code covering a wide range of applications has been developed. The second approach is explicitly concerned with axisymmetric bodies and low observability problems. Boundary element methods, as well as mixed boundary element and finite element methods are briefly described and exemplified. (author). 21 refs., 13 figs., 3 insets

  11. Method for Determining Vaporization Parameters

    Data.gov (United States)

    National Aeronautics and Space Administration — An accurate method of measuring vaporization coefficients will be very useful to each of these disciplines: Cosmochemistry,Evaporative Vapor Deposition, Durability...

  12. Methods of making microfluidic devices

    KAUST Repository

    Buttner, Ulrich

    2017-06-01

    Microfluidics has advanced in terms of designs and structures, however, fabrication methods are either time consuming or expensive to produce, in terms of the facilities and equipment needed. A fast and economically viable method is provided to allow, for example, research groups to have access to microfluidic fabrication. Unlike most fabrication methods, a method is provided to fabricate a microfluidic device in one step. In an embodiment, a resolution of 50 micrometers was achieved by using maskless high-resolution digital light projection (MDLP). Bonding and channel fabrication of complex or simple structures can be rapidly incorporated to fabricate the microfluidic devices.

  13. Projector Method: theory and examples

    International Nuclear Information System (INIS)

    Dahl, E.D.

    1985-01-01

    The Projector Method technique for numerically analyzing lattice gauge theories was developed to take advantage of certain simplifying features of gauge theory models. Starting from a very general notion of what the Projector Method is, the techniques are applied to several model problems. After these examples have traced the development of the actual algorithm from the general principles of the Projector Method, a direct comparison between the Projector and the Euclidean Monte Carlo is made, followed by a discussion of the application to Periodic Quantum Electrodynamics in two and three spatial dimensions. Some methods for improving the efficiency of the Projector in various circumstances are outlined. 10 refs., 7 figs

  14. Explicit, implicit, and hybrid methods

    Science.gov (United States)

    Belytschko, T.

    1989-01-01

    Time integration methods can be separated into two groups: explicit and implicit. Methods which do not involve the solution of any algebraic equations are called explicit, while those that require the solution of equations are called implicit. The relative advantages and disadvantages of explicit and implicit methods are summarized. The major trend in the past decade of research was to use hybrization methods to take advantage of the complementary nature of the positive attributes of explicit and implicit integration. These trends are briefly discussed.

  15. Unidirectional Fabric Drape Testing Method.

    Science.gov (United States)

    Mei, Zaihuan; Shen, Wei; Wang, Yan; Yang, Jingzhi; Zhou, Ting; Zhou, Hua

    2015-01-01

    In most cases, fabrics such as curtains, skirts, suit pants and so on are draped under their own gravity parallel to fabric plane while the gravity is perpendicular to fabric plane in traditional drape testing method. As a result, it does not conform to actual situation and the test data is not convincing enough. To overcome this problem, this paper presents a novel method which simulates the real mechanical conditions and ensures the gravity is parallel to the fabric plane. This method applied a low-cost Kinect Sensor device to capture the 3-dimensional (3D) drape profile, thus we obtained the drape degree parameters and aesthetic parameters by 3D reconstruction and image processing and analysis techniques. The experiment was conducted on our self-devised drape-testing instrument by choosing different kinds of weave structure fabrics as our testing samples and the results were compared with those of traditional method and subjective evaluation. Through regression and correlation analysis we found that this novel testing method was significantly correlated with the traditional and subjective evaluation method. We achieved a new, non-contact 3D measurement method for drape testing, namely unidirectional fabric drape testing method. This method is more suitable for evaluating drape behavior because it is more in line with actual mechanical conditions of draped fabrics and has a well consistency with the requirements of visual and aesthetic style of fabrics.

  16. An introduction to g methods.

    Science.gov (United States)

    Naimi, Ashley I; Cole, Stephen R; Kennedy, Edward H

    2017-04-01

    Robins' generalized methods (g methods) provide consistent estimates of contrasts (e.g. differences, ratios) of potential outcomes under a less restrictive set of identification conditions than do standard regression methods (e.g. linear, logistic, Cox regression). Uptake of g methods by epidemiologists has been hampered by limitations in understanding both conceptual and technical details. We present a simple worked example that illustrates basic concepts, while minimizing technical complications. © The Author 2016; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association.

  17. Chemical methods of rock analysis

    National Research Council Canada - National Science Library

    Jeffery, P. G; Hutchison, D

    1981-01-01

    .... Such methods include those based upon spectrophotometry, flame emission spectrometry and atomic absorption spectroscopy, as well as gravimetry, titrimetry and the use of ion-selective electrodes...

  18. Optimization of Medical Teaching Methods

    Directory of Open Access Journals (Sweden)

    Wang Fei

    2015-12-01

    Full Text Available In order to achieve the goal of medical education, medicine and adapt to changes in the way doctors work, with the rapid medical teaching methods of modern science and technology must be reformed. Based on the current status of teaching in medical colleges method to analyze the formation and development of medical teaching methods, characteristics, about how to achieve optimal medical teaching methods for medical education teachers and management workers comprehensive and thorough change teaching ideas and teaching concepts provide a theoretical basis.

  19. Metathesis catalysts and methods thereof

    Science.gov (United States)

    Schrock, Richard Royce; Yuan, Jian

    2016-04-19

    The present application provides, among other things, novel compounds for metathesis reactions, and methods for preparing and using provided compounds. In some embodiments, the present invention provides compounds having the structure of formula I or II. In some embodiments, the present invention provides methods for preparing a compound of formula I or II. In some embodiments, the present invention provides methods for using a provided compound. In some embodiments, a provided compound is useful for stereoselective ring-opening metathesis polymerization. In some embodiments, a provided metathesis method provides cis and/or isotactic polymers.

  20. Color image definition evaluation method based on deep learning method

    Science.gov (United States)

    Liu, Di; Li, YingChun

    2018-01-01

    In order to evaluate different blurring levels of color image and improve the method of image definition evaluation, this paper proposed a method based on the depth learning framework and BP neural network classification model, and presents a non-reference color image clarity evaluation method. Firstly, using VGG16 net as the feature extractor to extract 4,096 dimensions features of the images, then the extracted features and labeled images are employed in BP neural network to train. And finally achieve the color image definition evaluation. The method in this paper are experimented by using images from the CSIQ database. The images are blurred at different levels. There are 4,000 images after the processing. Dividing the 4,000 images into three categories, each category represents a blur level. 300 out of 400 high-dimensional features are trained in VGG16 net and BP neural network, and the rest of 100 samples are tested. The experimental results show that the method can take full advantage of the learning and characterization capability of deep learning. Referring to the current shortcomings of the major existing image clarity evaluation methods, which manually design and extract features. The method in this paper can extract the images features automatically, and has got excellent image quality classification accuracy for the test data set. The accuracy rate is 96%. Moreover, the predicted quality levels of original color images are similar to the perception of the human visual system.

  1. Methods in Logic Based Control

    DEFF Research Database (Denmark)

    Christensen, Georg Kronborg

    1999-01-01

    Desing and theory of Logic Based Control systems.Boolean Algebra, Karnaugh Map, Quine McClusky's algorithm. Sequential control design. Logic Based Control Method, Cascade Control Method. Implementation techniques: relay, pneumatic, TTL/CMOS,PAL and PLC- and Soft_PLC implementation. PLC...

  2. Sometimes "Newton's Method" Always "Cycles"

    Science.gov (United States)

    Latulippe, Joe; Switkes, Jennifer

    2012-01-01

    Are there functions for which Newton's method cycles for all non-trivial initial guesses? We construct and solve a differential equation whose solution is a real-valued function that two-cycles under Newton iteration. Higher-order cycles of Newton's method iterates are explored in the complex plane using complex powers of "x." We find a class of…

  3. Basic methods of isotope analysis

    International Nuclear Information System (INIS)

    Ochkin, A.V.; Rozenkevich, M.B.

    2000-01-01

    The bases of the most applied methods of the isotope analysis are briefly presented. The possibilities and analytical characteristics of the mass-spectrometric, spectral, radiochemical and special methods of the isotope analysis, including application of the magnetic resonance, chromatography and refractometry, are considered [ru

  4. Methods of Teaching Speech Recognition

    Science.gov (United States)

    Rader, Martha H.; Bailey, Glenn A.

    2010-01-01

    Objective: This article introduces the history and development of speech recognition, addresses its role in the business curriculum, outlines related national and state standards, describes instructional strategies, and discusses the assessment of student achievement in speech recognition classes. Methods: Research methods included a synthesis of…

  5. Laboratory method used for bioremediation

    Science.gov (United States)

    Carman, M. Leslie; Taylor, Robert T.

    2000-01-01

    An improved method for in situ microbial filter bioremediation having increasingly operational longevity of an in situ microbial filter emplaced into an aquifer. A method for generating a microbial filter of sufficient catalytic density and thickness, which has increased replenishment interval, improved bacteria attachment and detachment characteristics and the endogenous stability under in situ conditions. A system for in situ field water remediation.

  6. Method of producing polyalkylated oligoalkylenepolyamines

    Energy Technology Data Exchange (ETDEWEB)

    Elangovan, Arumugasamy

    2014-02-25

    A method of preparing polyalkylated oligoalkylenepolyamines is provided. The method includes contacting oligoalkylenepolyamine with a reagent composition comprising (a) alkyl bromide and/or alkyl chloride; (b) a basic agent; and (c) iodide salt. The alkylation reaction may be carried out in a polar, aprotic organic solvent.

  7. The factorization method and supersymmetry

    International Nuclear Information System (INIS)

    Alves, N.A.; Drigo Filho, E.

    1988-01-01

    Applying the factorization method, we generalize the harmonic - oscillator and the Coulomb potentials, both in arbitrary dimensions. We also show that this method allows the determination of the superpotentials and the supersymmetric partners associated with each of those systems. (author) [pt

  8. Electrochemical method for transferring graphene

    DEFF Research Database (Denmark)

    2015-01-01

    The present application discloses a method for separating a graphene-support layer laminate from a conducting substrate-graphene-support layer laminate, using a gentle, controllable electrochemical method. In this way, substrates which are fragile, expensive or difficult to manufacture can be used...... - and even re-used - without damage or destruction of the substrate or the graphene....

  9. Developing the Business Modelling Method

    NARCIS (Netherlands)

    Meertens, Lucas Onno; Iacob, Maria Eugenia; Nieuwenhuis, Lambertus Johannes Maria; Shishkov, B; Shishkov, Boris

    2011-01-01

    Currently, business modelling is an art, instead of a science, as no scientific method for business modelling exists. This, and the lack of using business models altogether, causes many projects to end after the pilot stage, unable to fulfil their apparent promise. We propose a structured method to

  10. Formal Methods: Practice and Experience

    DEFF Research Database (Denmark)

    Woodcock, Jim; Larsen, Peter Gorm; Bicarregui, Juan

    2009-01-01

    Formal methods use mathematical models for analysis and verification at any part of the program life-cycle. We describe the state of the art in the industrial use of formal methods, concentrating on their increasing use at the earlier stages of specification and design. We do this by reporting on...

  11. QUALITATIVE METHODS IN CREATIVITY STUDIES

    DEFF Research Database (Denmark)

    Hertel, Frederik

    2015-01-01

    -specific methods, involving a discussion of creativity test, divergent and convergent thinking, for studying creativity in this specific setting. Beside from that we will develop a research design involving a combination of methods necessary for conducting a case study in the setting mentioned....

  12. SPECTROPHOTOMETRIC METHOD FOR THE DETERMINATION ...

    African Journals Online (AJOL)

    A simple, rapid and sensitive spectrophotometric method has been developed for the determination of iodate (IO3-) in table salt and sea water. The proposed method is based on the reaction of iodate with potassium iodide in an acid medium to liberate iodine. The liberated iodine bleaches the blue color of methylene blue ...

  13. Preparation methods of alginate nanoparticles

    NARCIS (Netherlands)

    Paques, J.P.; Linden, van der E.; Rijn, van C.J.M.; Sagis, L.M.C.

    2014-01-01

    This article reviews available methods for the formation of alginate nano-aggregates, nanocapsules and nanospheres. Primarily, alginate nanoparticles are being prepared by two methods. In the “complexation method”, complex formation on the interface of an oil droplet is used to form alginate

  14. The 13C bicarbonate method

    DEFF Research Database (Denmark)

    Junghans, Peter; Larsson, Caroline; Jensen, Rasmus Bovbjerg

    2015-01-01

    We reconsider the principle of the (13)C bicarbonate (NaH(13)CO3) method ((13)C-BM) for the determination of the CO2 production to obtain an estimate of energy expenditure (EE). Its mathematical concept based on a three-compartmental model is related to the [(15)N]glycine end product method. The CO...

  15. Rapid prototyping: een veelbelovende methode

    NARCIS (Netherlands)

    Haverman, T.M.; Karagozoglu, K.H.; Prins, H.; Schulten, E.A.J.M.; Forouzanfar, T.

    2013-01-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization,

  16. Particle methods for Boltzmann equation

    International Nuclear Information System (INIS)

    Hermeline, F.

    1985-05-01

    This work is aimed at showing how to discretize an equation such as Boltzmann equation in its most general form, by particle methods. Then method is applied to some equations of plasma physics which appear as peculiar cases of Boltzmann equation, such as Vlasov equation, Bhatnager-Gross-Krook equation, Fokker-Planck equation and neutron transport equation [fr

  17. Automated methods of corrosion measurement

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov; Bech-Nielsen, Gregers; Reeve, John Ch

    1997-01-01

    to revise assumptions regarding the basis of the method, which sometimes leads to the discovery of as-yet unnoticed phenomena. The present selection of automated methods for corrosion measurements is not motivated simply by the fact that a certain measurement can be performed automatically. Automation...

  18. Forecasting Using Random Subspace Methods

    NARCIS (Netherlands)

    T. Boot (Tom); D. Nibbering (Didier)

    2016-01-01

    textabstractRandom subspace methods are a novel approach to obtain accurate forecasts in high-dimensional regression settings. We provide a theoretical justification of the use of random subspace methods and show their usefulness when forecasting monthly macroeconomic variables. We focus on two

  19. GLIMM'S METHOD FOR GAS DYNAMICS

    Energy Technology Data Exchange (ETDEWEB)

    Colella, Phillip

    1980-07-01

    We investigate Glimm's method, a method for constructing approximate solutions to systems of hyperbolic conservation laws in one space variable by sampling explicit wave solutions. It is extended to several space variables by operator splitting. We consider two functional problems. 1) We propose a highly accurate form of the sampling procedure, in one space variable, based on the van der Corput sampling sequence. We test the improved sampling procedure numerically in the case of inviscid compressible flow in one space dimension and find that it gives high resolution results both in the smooth parts of the solution, as well as the discontinuities. 2) We investigate the operator splitting procedure by means of which the multidimensional method is constructed. An 0(1) error stemming from the use of this procedure near shocks oblique to the spatial grid is analyzed numerically in the case of the equations for inviscid compressible flow in two space dimensions. We present a hybrid method which eliminates this error, consisting of Glimm's method, used in continuous parts of the flow, and the nonlinear Godunov's method, used in regions where large pressure jumps are generated. The resulting method is seen to be a substantial improvement over either of the component methods for multidimensional calculations.

  20. Creativity Methods in Interaction Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2010-01-01

    The field of interaction design encompasses a variety of methods for fostering innovation and creativity. In this paper, we present a selection of such methods that scaffold ideation and concept development in the early phases of design. As a conceptual frame for discussing these methods, we...... introduce four aspects that are particularly salient in the field of interaction design: tradition and transcendence, convergence and divergence, degree of structure, and sources of inspiration. We then outline how the methods relate to each of these aspects. The paper contributes to design practitioners...... by providing an overview of the methods and insights into when and how they may be employed to foster creativity and innovation in the design process; with regards to design research, the main contribution of the paper lies in the establishment and discussion of the four aspects as a frame for analyzing...

  1. Methods for computing color anaglyphs

    Science.gov (United States)

    McAllister, David F.; Zhou, Ya; Sullivan, Sophia

    2010-02-01

    A new computation technique is presented for calculating pixel colors in anaglyph images. The method depends upon knowing the RGB spectral distributions of the display device and the transmission functions of the filters in the viewing glasses. It requires the solution of a nonlinear least-squares program for each pixel in a stereo pair and is based on minimizing color distances in the CIEL*a*b* uniform color space. The method is compared with several techniques for computing anaglyphs including approximation in CIE space using the Euclidean and Uniform metrics, the Photoshop method and its variants, and a method proposed by Peter Wimmer. We also discuss the methods of desaturation and gamma correction for reducing retinal rivalry.

  2. A Voltage Quality Detection Method

    DEFF Research Database (Denmark)

    Chen, Zhe; Wei, Mu

    2008-01-01

    This paper presents a voltage quality detection method based on a phase-locked loop (PLL) technique. The technique can detect the voltage magnitude and phase angle of each individual phase under both normal and fault power system conditions. The proposed method has the potential to evaluate vario...... power quality disturbances, such as interruptions, sags and imbalances. Simulation studies have been performed. The effectiveness of the proposed method has been demonstrated under the simulated typical power disturbances.......This paper presents a voltage quality detection method based on a phase-locked loop (PLL) technique. The technique can detect the voltage magnitude and phase angle of each individual phase under both normal and fault power system conditions. The proposed method has the potential to evaluate various...

  3. Image restoration using multigrid methods.

    Science.gov (United States)

    Zhou, K; Rushforth, C K

    1991-07-10

    In this paper, we discuss several iterative methods for solving the system of linear equations that arises in the process of solving a Fredholm integral equation of the first kind. When applied to the very large systems that arise in connection with two- or three-dimension signal reconstructions, direct methods based on the singular-value decomposition require too much computation and conventional single grid iterative schemes may converge too slowly. We have developed a multigrid scheme in which the solution is sought on a fine grid, but discretizations on a set of coarser grids are used for intermediate calculations to reduce the overall computation effort. Although the quality of the reconstruction obtained using such methods is typically not as good as that achieved using a singular-value decomposition based method, computational considerations should make multigrid methods appealing for large systems of equations.

  4. Reflexive Learning through Visual Methods

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2014-01-01

    What. This chapter concerns how visual methods and visual materials can support visually oriented, collaborative, and creative learning processes in education. The focus is on facilitation (guiding, teaching) with visual methods in learning processes that are designerly or involve design. Visual...... or professional, to facilitate with visual methods in a critical, reflective, and experimental way. The chapter offers recommendations for facilitating with visual methods to support playful, emergent designerly processes. The chapter also has a critical, situated perspective. Where. This chapter offers case...... challenges are discussed, including supporting difficult group collaborative processes (such as dealing with interpersonal tensions). You will gain an understanding about how and why to work with visual methods and how to develop a dynamic, reflexive facilitation practice. The chapter contains...

  5. Monte Carlo Methods in Physics

    International Nuclear Information System (INIS)

    Santoso, B.

    1997-01-01

    Method of Monte Carlo integration is reviewed briefly and some of its applications in physics are explained. A numerical experiment on random generators used in the monte Carlo techniques is carried out to show the behavior of the randomness of various methods in generating them. To account for the weight function involved in the Monte Carlo, the metropolis method is used. From the results of the experiment, one can see that there is no regular patterns of the numbers generated, showing that the program generators are reasonably good, while the experimental results, shows a statistical distribution obeying statistical distribution law. Further some applications of the Monte Carlo methods in physics are given. The choice of physical problems are such that the models have available solutions either in exact or approximate values, in which comparisons can be mode, with the calculations using the Monte Carlo method. Comparison show that for the models to be considered, good agreement have been obtained

  6. Vortex methods and vortex statistics

    International Nuclear Information System (INIS)

    Chorin, A.J.

    1993-05-01

    Vortex methods originated from the observation that in incompressible, inviscid, isentropic flow vorticity (or, more accurately, circulation) is a conserved quantity, as can be readily deduced from the absence of tangential stresses. Thus if the vorticity is known at time t = 0, one can deduce the flow at a later time by simply following it around. In this narrow context, a vortex method is a numerical method that makes use of this observation. Even more generally, the analysis of vortex methods leads, to problems that are closely related to problems in quantum physics and field theory, as well as in harmonic analysis. A broad enough definition of vortex methods ends up by encompassing much of science. Even the purely computational aspects of vortex methods encompass a range of ideas for which vorticity may not be the best unifying theme. The author restricts himself in these lectures to a special class of numerical vortex methods, those that are based on a Lagrangian transport of vorticity in hydrodynamics by smoothed particles (''blobs'') and those whose understanding contributes to the understanding of blob methods. Vortex methods for inviscid flow lead to systems of ordinary differential equations that can be readily clothed in Hamiltonian form, both in three and two space dimensions, and they can preserve exactly a number of invariants of the Euler equations, including topological invariants. Their viscous versions resemble Langevin equations. As a result, they provide a very useful cartoon of statistical hydrodynamics, i.e., of turbulence, one that can to some extent be analyzed analytically and more importantly, explored numerically, with important implications also for superfluids, superconductors, and even polymers. In the authors view, vortex ''blob'' methods provide the most promising path to the understanding of these phenomena

  7. Evaluation of Two New Smoothing Methods in Equating: The Cubic B-Spline Presmoothing Method and the Direct Presmoothing Method

    Science.gov (United States)

    Cui, Zhongmin; Kolen, Michael J.

    2009-01-01

    This article considers two new smoothing methods in equipercentile equating, the cubic B-spline presmoothing method and the direct presmoothing method. Using a simulation study, these two methods are compared with established methods, the beta-4 method, the polynomial loglinear method, and the cubic spline postsmoothing method, under three sample…

  8. Enhancing the (MSLDIP) image steganographic method (ESLDIP method)

    Science.gov (United States)

    Seddik Saad, Al-hussien

    2011-10-01

    Message transmissions over the Internet still have data security problem. Therefore, secure and secret communication methods are needed for transmitting messages over the Internet. Cryptography scrambles the message so that it cannot be understood. However, it makes the message suspicious enough to attract eavesdropper's attention. Steganography hides the secret message within other innocuous-looking cover files (i.e. images, music and video files) so that it cannot be observed [1].The term steganography originates from the Greek root words "steganos'' and "graphein'' which literally mean "covered writing''. It is defined as the science that involves communicating secret data in an appropriate multimedia carrier, e.g., image, audio text and video files [3].Steganographic techniques allow one party to communicate information to another without a third party even knowing that the communication is occurring. The ways to deliver these "secret messages" vary greatly [3].Our proposed method called Enhanced SLDIP (ESLDIP). In which the maximmum hiding capacity (MHC) of proposed ESLDIP method is higher than the previously proposed MSLDIP methods and the PSNR of the ESLDIP method is higher than the MSLDIP PSNR values', which means that the image quality of the ESLDIP method will be better than MSLDIP method and the maximmum hiding capacity (MHC) also improved. The rest of this paper is organized as follows. In section 2, steganography has been discussed; lingo, carriers and types. In section 3, related works are introduced. In section 4, the proposed method will be discussed in details. In section 5, the simulation results are given and Section 6 concludes the paper.

  9. New Methods of Celestial Mechanics

    Science.gov (United States)

    Poincare, Henri; Goroff, David

    Edited by Daniel Goroff, Harvard University This English-language edition of Poincare's landmark work is of interest not only to historians of science, but also to mathematicians. Beginning from an investigation of the three-body problem of Newtonian mechanics, Poincare lays the foundations of the qualitative solutions of differential equations. To investigate the long-unsolved problem of the stability of the Solar System, Poincare invented a number of new techniques including canonical transformations, asymptotic series expansions, and integral invariants. These "new methods" are even now finding applications in chaos and other contemporary disciplines. Contents: Volume I: Periodic and asymptotic solutions: Introduction by Daniel Goroff. Generalities and the Jacobi method. Series integration. Periodic solutions. Characteristic exponents. Nonexistence of uniform integrals. Approximate development of the perturbative function. Asymptotic solutions. Volume II: Approximations by series: Formal calculus. Methods of Newcomb and Lindstedt. Application to the study of secular variations. Application to the three-body problem. Application to orbits. Divergence of the Lindstedt series. Direct calculation of the series. Other methods of direct calculation. Gylden methods. Case of linear equations. Bohlin methods. Bohlin series. Extension of the Bohlin method. Volume III: Integral invariants and asymptotic properties of certain solutions: Integral invariants. Formation of invariants. Use of integral invariants. Integral invariants and asymptotic solutions. Poisson stability. Theory of consequents. Periodic solutions of the second kind. Different forms of the principle of least action.

  10. Evaluation of turbulence mitigation methods

    Science.gov (United States)

    van Eekeren, Adam W. M.; Huebner, Claudia S.; Dijk, Judith; Schutte, Klamer; Schwering, Piet B. W.

    2014-05-01

    Atmospheric turbulence is a well-known phenomenon that diminishes the recognition range in visual and infrared image sequences. There exist many different methods to compensate for the effects of turbulence. This paper focuses on the performance of two software-based methods to mitigate the effects of low- and medium turbulence conditions. Both methods are capable of processing static and dynamic scenes. The first method consists of local registration, frame selection, blur estimation and deconvolution. The second method consists of local motion compensation, fore- /background segmentation and weighted iterative blind deconvolution. A comparative evaluation using quantitative measures is done on some representative sequences captured during a NATO SET 165 trial in Dayton. The amount of blurring and tilt in the imagery seem to be relevant measures for such an evaluation. It is shown that both methods improve the imagery by reducing the blurring and tilt and therefore enlarge the recognition range. Furthermore, results of a recognition experiment using simulated data are presented that show that turbulence mitigation using the first method improves the recognition range up to 25% for an operational optical system.

  11. An enhanced splined saddle method

    Science.gov (United States)

    Ghasemi, S. Alireza; Goedecker, Stefan

    2011-07-01

    We present modifications for the method recently developed by Granot and Baer [J. Chem. Phys. 128, 184111 (2008)], 10.1063/1.2916716. These modifications significantly enhance the efficiency and reliability of the method. In addition, we discuss some specific features of this method. These features provide important flexibilities which are crucial for a double-ended saddle point search method in order to be applicable to complex reaction mechanisms. Furthermore, it is discussed under what circumstances this methods might fail to find the transition state and remedies to avoid such situations are provided. We demonstrate the performance of the enhanced splined saddle method on several examples with increasing complexity, isomerization of ammonia, ethane and cyclopropane molecules, tautomerization of cytosine, the ring opening of cyclobutene, the Stone-Wales transformation of the C60 fullerene, and finally rolling a small NaCl cube on NaCl(001) surface. All of these calculations are based on density functional theory. The efficiency of the method is remarkable in regard to the reduction of the total computational time.

  12. Methodical bases of geodemographic forecasting

    Directory of Open Access Journals (Sweden)

    Катерина Сегіда

    2016-10-01

    Full Text Available The article deals with methodological features of the forecast of population size and composition. The essence and features of probabilistic demographic forecasting, methods, a component and dynamic ranks are considered; requirements to initial indicators for each type of the forecast are provided. It is noted that geo-demographic forecast is an important component of regional geo-demographic characteristic. Features of the demographic forecast development by component method (recursors of age are given, basic formulae of calculation, including the equation of demographic balance, a formula recursors taking into account gender and age indicators, survival coefficient are presented. The basic methodical principles of the demographic forecast are given by an extrapolation method (dynamic ranks, calculation features by means of the generalized indicators, such as extrapolation on the basis of indicators of an average pure gain, average growth rate and average rate of a gain are presented. To develop population forecast, the method of retrospective extrapolation (for the short-term forecast and a component method (for the mid-term forecast are mostly used. The example of such development by component method for gender and age structure of the population of Kharkiv region with step-by-step explanation of calculation is provided. The example of Kharkiv region’s population forecast development is provided by the method of dynamic ranks. Having carried out calculations of the main forecast indicators by administrative units, it is possible to determine features of further regional demographic development, to reveal internal territorial distinctions in demographic development. Application of separate forecasting methods allows to develop the forecast for certain indicators, however essential a variety, nonlinearity and not stationarity of the processes constituting demographic development forces to look +for new approaches and

  13. A method for manufacturing compacts

    International Nuclear Information System (INIS)

    Baschwitz, Robert; Raymond, Jean.

    1974-01-01

    Description is given of a method for preparing compacts with high matrix density. The method is characterized by the steps of forming the mixture by simultaneously pouring the components directly into a compacting matrix comprising coated particles and a graphite binder mixture in the granular form, then compressing the compact after having brought the material to be compacted to a temperature at which the binder is in the fluid state. The method can be applied to the manufacture of compacts for high temperature nuclear reactors [fr

  14. Lectures on the coupling method

    CERN Document Server

    Lindvall, Torgny

    2002-01-01

    An important tool in probability theory and its applications, the coupling method is primarily used in estimates of total variation distances. The method also works well in establishing inequalities, and it has proven highly successful in the study of Markov and renewal process asymptotics. This text represents a detailed, comprehensive examination of the method and its broad variety of applications. Readers progress from simple to advanced topics, with end-of-discussion notes that reinforce the preceding material. Topics include renewal theory, Markov chains, Poisson approximation, ergodicity

  15. Methods of statistical model estimation

    CERN Document Server

    Hilbe, Joseph

    2013-01-01

    Methods of Statistical Model Estimation examines the most important and popular methods used to estimate parameters for statistical models and provide informative model summary statistics. Designed for R users, the book is also ideal for anyone wanting to better understand the algorithms used for statistical model fitting. The text presents algorithms for the estimation of a variety of regression procedures using maximum likelihood estimation, iteratively reweighted least squares regression, the EM algorithm, and MCMC sampling. Fully developed, working R code is constructed for each method. Th

  16. User-Centered Agile Methods

    CERN Document Server

    Beyer, Hugh

    2010-01-01

    With the introduction and popularization of Agile methods of software development, existing relationships and working agreements between user experience groups and developers are being disrupted. Agile methods introduce new concepts: the Product Owner, the Customer (but not the user), short iterations, User Stories. Where do UX professionals fit in this new world? Agile methods also bring a new mindset -- no big design, no specifications, minimal planning -- which conflict with the needs of UX design. This lecture discusses the key elements of Agile for the UX community and describes strategie

  17. Immunological methods for gentamicin determination

    International Nuclear Information System (INIS)

    Krugers Dagneauz, P.G.L.C.; Olthuis, F.M.F.G.

    1979-01-01

    For immunoassay, an antibody against the substance to the determined, the pure substance itself, and a labelled form or derivative of the substance are required. The principles and problems of the preparation of antibodies are discussed, some methods for the preparation of derivatives labelled with radioactive tracers or enzymes are reviewed, and homologous enzyme-immunological determination of gentamicin is discussed in detail. A comparison is mae of three radio-immunological determination methods, and the most suitable radio-immunological method is compared with two microbiological techniques. The results are found to be comparable. (Auth.)

  18. User-centered agile method

    CERN Document Server

    Deuff, Dominique

    2013-01-01

    Agile development methods began to emerge around 20 years ago. However, it was not until the early 2000s that they began to be widely used in industry. This growth was often due to the advent of Internet services requiring faster cycles of development in order to heighten the rate at which an ever-greater number of functionalities were made available. In parallel, user-centered design (UCD) methods were also becoming more and more widely used: hence, user-centered design and agile methods were bound to cross paths, at least in the telecoms industry! During this period, in the field of telec

  19. Statistical methods for physical science

    CERN Document Server

    Stanford, John L

    1994-01-01

    This volume of Methods of Experimental Physics provides an extensive introduction to probability and statistics in many areas of the physical sciences, with an emphasis on the emerging area of spatial statistics. The scope of topics covered is wide-ranging-the text discusses a variety of the most commonly used classical methods and addresses newer methods that are applicable or potentially important. The chapter authors motivate readers with their insightful discussions, augmenting their material withKey Features* Examines basic probability, including coverage of standard distributions, time s

  20. quadratic spline finite element method

    Directory of Open Access Journals (Sweden)

    A. R. Bahadir

    2002-01-01

    Full Text Available The problem of heat transfer in a Positive Temperature Coefficient (PTC thermistor, which may form one element of an electric circuit, is solved numerically by a finite element method. The approach used is based on Galerkin finite element using quadratic splines as shape functions. The resulting system of ordinary differential equations is solved by the finite difference method. Comparison is made with numerical and analytical solutions and the accuracy of the computed solutions indicates that the method is well suited for the solution of the PTC thermistor problem.

  1. Method of synthesizing tungsten nanoparticles

    Science.gov (United States)

    Thoma, Steven G; Anderson, Travis M

    2013-02-12

    A method to synthesize tungsten nanoparticles has been developed that enables synthesis of nanometer-scale, monodisperse particles that can be stabilized only by tetrahydrofuran. The method can be used at room temperature, is scalable, and the product concentrated by standard means. Since no additives or stabilizing surfactants are required, this method is particularly well suited for producing tungsten nanoparticles for dispersion in polymers. If complete dispersion is achieved due to the size of the nanoparticles, then the optical properties of the polymer can be largely maintained.

  2. Probabilistic methods in combinatorial analysis

    CERN Document Server

    Sachkov, Vladimir N

    2014-01-01

    This 1997 work explores the role of probabilistic methods for solving combinatorial problems. These methods not only provide the means of efficiently using such notions as characteristic and generating functions, the moment method and so on but also let us use the powerful technique of limit theorems. The basic objects under investigation are nonnegative matrices, partitions and mappings of finite sets, with special emphasis on permutations and graphs, and equivalence classes specified on sequences of finite length consisting of elements of partially ordered sets; these specify the probabilist

  3. Statistical methods and materials characterisation

    International Nuclear Information System (INIS)

    Wallin, K.R.W.

    2010-01-01

    Statistics is a wide mathematical area, which covers a myriad of analysis and estimation options, some of which suit special cases better than others. A comprehensive coverage of the whole area of statistics would be an enormous effort and would also be outside the capabilities of this author. Therefore, this does not intend to be a textbook on statistical methods available for general data analysis and decision making. Instead it will highlight a certain special statistical case applicable to mechanical materials characterization. The methods presented here do not in any way rule out other statistical methods by which to analyze mechanical property material data. (orig.)

  4. Integral equation methods for electromagnetics

    CERN Document Server

    Volakis, John

    2012-01-01

    This text/reference is a detailed look at the development and use of integral equation methods for electromagnetic analysis, specifically for antennas and radar scattering. Developers and practitioners will appreciate the broad-based approach to understanding and utilizing integral equation methods and the unique coverage of historical developments that led to the current state-of-the-art. In contrast to existing books, Integral Equation Methods for Electromagnetics lays the groundwork in the initial chapters so students and basic users can solve simple problems and work their way up to the mo

  5. Machine learning methods for planning

    CERN Document Server

    Minton, Steven

    1993-01-01

    Machine Learning Methods for Planning provides information pertinent to learning methods for planning and scheduling. This book covers a wide variety of learning methods and learning architectures, including analogical, case-based, decision-tree, explanation-based, and reinforcement learning.Organized into 15 chapters, this book begins with an overview of planning and scheduling and describes some representative learning systems that have been developed for these tasks. This text then describes a learning apprentice for calendar management. Other chapters consider the problem of temporal credi

  6. Methods for calculating nonconcave entropies

    International Nuclear Information System (INIS)

    Touchette, Hugo

    2010-01-01

    Five different methods which can be used to analytically calculate entropies that are nonconcave as functions of the energy in the thermodynamic limit are discussed and compared. The five methods are based on the following ideas and techniques: (i) microcanonical contraction, (ii) metastable branches of the free energy, (iii) generalized canonical ensembles with specific illustrations involving the so-called Gaussian and Betrag ensembles, (iv) the restricted canonical ensemble, and (v) the inverse Laplace transform. A simple long-range spin model having a nonconcave entropy is used to illustrate each method

  7. Mechanical methods for induction of labour

    NARCIS (Netherlands)

    Jozwiak, Marta; Bloemenkamp, Kitty W. M.; Kelly, Anthony J.; Mol, Ben Willem J.; Irion, Olivier; Boulvain, Michel

    2012-01-01

    Background Mechanical methods were the first methods developed to ripen the cervix and induce labour. During recent decades they have been substituted by pharmacological methods. Potential advantages of mechanical methods, compared with pharmacological methods, may include simplicity of

  8. An improved selective sampling method

    International Nuclear Information System (INIS)

    Miyahara, Hiroshi; Iida, Nobuyuki; Watanabe, Tamaki

    1986-01-01

    The coincidence methods which are currently used for the accurate activity standardisation of radio-nuclides, require dead time and resolving time corrections which tend to become increasingly uncertain as countrates exceed about 10 K. To reduce the dependence on such corrections, Muller, in 1981, proposed the selective sampling method using a fast multichannel analyser (50 ns ch -1 ) for measuring the countrates. It is, in many ways, more convenient and possibly potentially more reliable to replace the MCA with scalers and a circuit is described employing five scalers; two of them serving to measure the background correction. Results of comparisons using our new method and the coincidence method for measuring the activity of 60 Co sources yielded agree-ment within statistical uncertainties. (author)

  9. Biological Methods and Manual Development

    Science.gov (United States)

    EPA scientists conduct research to develop and evaluate analytical methods for the identification, enumeration, evaluation of aquatic organisms exposed to environmental stressors and to correlate exposures with effects on chemical and biological indicators

  10. Automated reasoning-alternative methods

    Directory of Open Access Journals (Sweden)

    Perović Aleksandar

    2004-01-01

    Full Text Available Our main goal is to describe a potential usage of the interpretation method (i.e. formal representation of one first order theory into another together with quantifier elimination procedures developed in the GIS.

  11. Antibody engineering: methods and protocols

    National Research Council Canada - National Science Library

    Chames, Patrick

    2012-01-01

    "Antibody Engineering: Methods and Protocols, Second Edition was compiled to give complete and easy access to a variety of antibody engineering techniques, starting from the creation of antibody repertoires and efficient...

  12. Ingenious mathematical problems and methods

    CERN Document Server

    Graham, Louis A

    2013-01-01

    Collection of 100 of the best submissions to a math puzzle column features problems in engineering situations, logic, number theory, and geometry. Most solutions include details of several different methods.

  13. Evaluation methods for hospital facilities

    DEFF Research Database (Denmark)

    Fronczek-Munter, Aneta

    2013-01-01

    according to focus areas and proposes which evaluation methods to use in different building phases of healthcare facilities. Hospital evaluations with experts and users are also considered; their subjective view on space, function, technology, usability and aesthetics. Results & solutions: This paper...... presents the different methods for evaluating buildings in use in a new model, the Evaluation Focus Flower, and proposes which evaluation methods are suitable for various aims and building phases, i.e. which is giving best input for the initial briefing process of new hospital facilities with ambition...... of creating buildings with enhanced usability. Additionally various evaluation methods used in hospital cases in Denmark and Norway are presented. Involvement of users is proposed, not just in defining requirements but also in co-creation/design and evaluation of solutions. The theories and preliminary...

  14. Nonlinear programming analysis and methods

    CERN Document Server

    Avriel, Mordecai

    2012-01-01

    This text provides an excellent bridge between principal theories and concepts and their practical implementation. Topics include convex programming, duality, generalized convexity, analysis of selected nonlinear programs, techniques for numerical solutions, and unconstrained optimization methods.

  15. Chemometric methods in capillary electrophoresis

    National Research Council Canada - National Science Library

    Hanrahan, Grady; Gomez, Frank A

    2010-01-01

    ... 113 6 CHEMOMETRIC METHODS FOR THE OPTIMIZATION OF CE AND CE- MS IN PHARMACEUTICAL, ENVIRONMENTAL, AND FOOD ANALYSIS Javier Hernández-Borges, Miguel Ángel Rodríguez-Delgado, and Alejandro Cifuent...

  16. Computational methods in stochastic dynamics

    CERN Document Server

    Papadrakakis, Manolis; Papadopoulos, Vissarion

    2011-01-01

    Covering what is an emerging frontier in research, this book focuses on advanced computational methods and software tools. These can be of huge assistance in tackling complex problems in stochastic dynamic and seismic analysis as well as structure design.

  17. DDOT MXD+ method development report.

    Science.gov (United States)

    2015-09-01

    Mixed-use development has become increasingly common across the country, including Washington, D.C. : However, a straightforward and empirically validated method for evaluating the traffic impacts of such : projects is still needed. The data presente...

  18. Method for controlling powertrain pumps

    Science.gov (United States)

    Sime, Karl Andrew; Spohn, Brian L; Demirovic, Besim; Martini, Ryan D; Miller, Jean Marie

    2013-10-22

    A method of controlling a pump supplying a fluid to a transmission includes sensing a requested power and an excess power for a powertrain. The requested power substantially meets the needs of the powertrain, while the excess power is not part of the requested power. The method includes sensing a triggering condition in response to the ability to convert the excess power into heat in the transmission, and determining that an operating temperature of the transmission is below a maximum. The method also includes determining a calibrated baseline and a dissipation command for the pump. The calibrated baseline command is configured to supply the fluid based upon the requested power, and the dissipation command is configured to supply additional fluid and consume the excess power with the pump. The method operates the pump at a combined command, which is equal to the calibrated baseline command plus the dissipation command.

  19. Phylogenetic reconstruction methods: an overview.

    Science.gov (United States)

    De Bruyn, Alexandre; Martin, Darren P; Lefeuvre, Pierre

    2014-01-01

    Initially designed to infer evolutionary relationships based on morphological and physiological characters, phylogenetic reconstruction methods have greatly benefited from recent developments in molecular biology and sequencing technologies with a number of powerful methods having been developed specifically to infer phylogenies from macromolecular data. This chapter, while presenting an overview of basic concepts and methods used in phylogenetic reconstruction, is primarily intended as a simplified step-by-step guide to the construction of phylogenetic trees from nucleotide sequences using fairly up-to-date maximum likelihood methods implemented in freely available computer programs. While the analysis of chloroplast sequences from various Vanilla species is used as an illustrative example, the techniques covered here are relevant to the comparative analysis of homologous sequences datasets sampled from any group of organisms.

  20. Methods for treating lignocellulosic materials

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, Robert; Gregoire, Claire; Travisano, Philip; Madsen, Lee; Matis, Neta; Har-Tal, Yael Miriam; Eliahu, Shay; Lawson, James Alan; Lapidot, Noa; Eyal, Aharon M.; Bauer, Timothy Allen; McWilliams, Paul; Zviely, Michael; Carden, Adam

    2017-05-16

    The present invention relates to methods of processing lignocellulosic material to obtain hemicellulose sugars, cellulose sugars, lignin, cellulose and other high-value products. Also provided are hemicellulose sugars, cellulose sugars, lignin, cellulose, and other high-value products.

  1. Methods for treating lignocellulosic materials

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, Robert; Gregoire, Claire; Travisano, Philip; Madsen, Lee; Matis, Neta; Har-Tal, Yael Miriam; Eliahu, Shay; Lawson, James Alan; Lapidot, Noa; Burke, Luke; Eyal, Aharon M.; Bauer, Timothy Allen; Sade, Hagit; McWilliams, Paul; Zviely, Michael; Carden, Adam

    2017-04-25

    The present invention relates to methods of processing lignocellulosic material to obtain hemicellulose sugars, cellulose sugars, lignin, cellulose and other high-value products. Also provided are hemicellulose sugars, cellulose sugars, lignin, cellulose, and other high-value products.

  2. Semiclassical Methods in Chemical Physics.

    Science.gov (United States)

    Miller, William H.

    1986-01-01

    Discusses the role of semiclassical theory in chemical physics both as a computational method and conceptual framework for interpreting quantum mechanical experiments and calculations. Topics covered include energy wells and eigenvalues, scattering, statistical mechanics and electronically nonadiabiatic processes. (JM)

  3. Improved method for methane generation

    DEFF Research Database (Denmark)

    2010-01-01

    A method for treatment of a material comprising lignocellulosic fibres is disclosed. More particularly, the treatment increases the accessibility of the lignocellulosic fibres for following microbial or biological processes....

  4. Methods for treating lignocellulosic materials

    Science.gov (United States)

    Jansen, Robert; Travisano, Philip; Madsen, Lee; Matis, Neta; Lawson, James Alan; Lapidot, Noa; Eyal, Aharon M.; Bauer, Timothy Allen; Belman, Ziv-Vladimir; Hallac, Bassem; Zviely, Michael

    2017-10-10

    The present invention relates to methods of processing lignocellulosic material to obtain hemicellulose sugars, cellulose sugars, lignin, cellulose and other high-value products. Also provided are hemicellulose sugars, cellulose sugars, lignin, cellulose, and other high-value products.

  5. Selection of pipe repair methods.

    Science.gov (United States)

    2013-06-01

    The objective of this research is to provide pipeline operators with testing procedures and : results of the performance of composite pipe repair methods and ultimately, improve their : selection and installation, and reduce the risks associated with...

  6. Chemical methods of rock analysis

    National Research Council Canada - National Science Library

    Jeffery, P. G; Hutchison, D

    1981-01-01

    A practical guide to the methods in general use for the complete analysis of silicate rock material and for the determination of all those elements present in major, minor or trace amounts in silicate...

  7. Radionuclide methods in pediatric cardiology

    International Nuclear Information System (INIS)

    Reich, O.; Ruth, C.; Samanek, M.

    1990-01-01

    The use of radionuclide methods in pediatric cardiology is discussed for non-invasive evaluation of myocardial function and perfusion, regional lung perfusion and ventilation, and for measuring central and peripheral hemodynamics. (H.W.). 16 refs

  8. Graph modeling systems and methods

    Science.gov (United States)

    Neergaard, Mike

    2015-10-13

    An apparatus and a method for vulnerability and reliability modeling are provided. The method generally includes constructing a graph model of a physical network using a computer, the graph model including a plurality of terminating vertices to represent nodes in the physical network, a plurality of edges to represent transmission paths in the physical network, and a non-terminating vertex to represent a non-nodal vulnerability along a transmission path in the physical network. The method additionally includes evaluating the vulnerability and reliability of the physical network using the constructed graph model, wherein the vulnerability and reliability evaluation includes a determination of whether each terminating and non-terminating vertex represents a critical point of failure. The method can be utilized to evaluate wide variety of networks, including power grid infrastructures, communication network topologies, and fluid distribution systems.

  9. Parallelization of the FLAPW method

    International Nuclear Information System (INIS)

    Canning, A.; Mannstadt, W.; Freeman, A.J.

    1999-01-01

    The FLAPW (full-potential linearized-augmented plane-wave) method is one of the most accurate first-principles methods for determining electronic and magnetic properties of crystals and surfaces. Until the present work, the FLAPW method has been limited to systems of less than about one hundred atoms due to a lack of an efficient parallel implementation to exploit the power and memory of parallel computers. In this work we present an efficient parallelization of the method by division among the processors of the plane-wave components for each state. The code is also optimized for RISC (reduced instruction set computer) architectures, such as those found on most parallel computers, making full use of BLAS (basic linear algebra subprograms) wherever possible. Scaling results are presented for systems of up to 686 silicon atoms and 343 palladium atoms per unit cell, running on up to 512 processors on a CRAY T3E parallel computer

  10. Aseptic Laboratory Techniques: Plating Methods

    OpenAIRE

    Sanders, Erin R.

    2012-01-01

    Microorganisms are present on all inanimate surfaces creating ubiquitous sources of possible contamination in the laboratory. Experimental success relies on the ability of a scientist to sterilize work surfaces and equipment as well as prevent contact of sterile instruments and solutions with non-sterile surfaces. Here we present the steps for several plating methods routinely used in the laboratory to isolate, propagate, or enumerate microorganisms such as bacteria and phage. All five method...

  11. Detection methods for irradiated foods

    International Nuclear Information System (INIS)

    Dyakova, A.; Tsvetkova, E.; Nikolova, R.

    2005-01-01

    In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

  12. Statistical methods in quality assurance

    International Nuclear Information System (INIS)

    Eckhard, W.

    1980-01-01

    During the different phases of a production process - planning, development and design, manufacturing, assembling, etc. - most of the decision rests on a base of statistics, the collection, analysis and interpretation of data. Statistical methods can be thought of as a kit of tools to help to solve problems in the quality functions of the quality loop with respect to produce quality products and to reduce quality costs. Various statistical methods are represented, typical examples for their practical application are demonstrated. (RW)

  13. [Isaac Newton's Anguli Contactus method].

    Science.gov (United States)

    Wawrzycki, Jarosław

    2014-01-01

    In this paper we discuss the geometrical method for calculating the curvature of a class of curves from the third Book of Isaac Newton's Principia. The method involves any curve which is generated from an elementary curve (actually from any curve whose curvature we known of) by means of transformation increasing the polar angular coordinate in a constant ratio, but unchanging the polar radial angular coordinate.

  14. Factors in Agile Methods Adoption

    Directory of Open Access Journals (Sweden)

    Samia Abdalhamid

    2017-05-01

    Full Text Available There are many factors that can affect the process of adopting Agile methods during software developing. This paper illustrates the critical factors in Agile methods adoption in software organizations. To present the success and failure factors, an exploratory study is carried out among the critical factors of success and failure from existing studies. Dimensions and Factors are introduced utilizing success and failure dimensions. The mind map was used to clarify these factors.

  15. System and method for authentication

    Science.gov (United States)

    Duerksen, Gary L.; Miller, Seth A.

    2015-12-29

    Described are methods and systems for determining authenticity. For example, the method may include providing an object of authentication, capturing characteristic data from the object of authentication, deriving authentication data from the characteristic data of the object of authentication, and comparing the authentication data with an electronic database comprising reference authentication data to provide an authenticity score for the object of authentication. The reference authentication data may correspond to one or more reference objects of authentication other than the object of authentication.

  16. Designing a qualitative methods syllabus

    OpenAIRE

    Kier, Elizabeth

    2003-01-01

    After some initial trepidation, I was excited about teaching a graduate seminar in qualitative methods. It could hardly be a more interesting time. The publication of King, Keohane, and Verba’s Designing Social Inquiry reinvigorated interest in qualitative methods, and I wanted to design the course to profit from this emerging debate. Whereas KKV appealed to qualitative researchers to do their best to adopt quantitative methodological guidelines, I wanted to encourage students to think about ...

  17. Robust methods for data reduction

    CERN Document Server

    Farcomeni, Alessio

    2015-01-01

    Robust Methods for Data Reduction gives a non-technical overview of robust data reduction techniques, encouraging the use of these important and useful methods in practical applications. The main areas covered include principal components analysis, sparse principal component analysis, canonical correlation analysis, factor analysis, clustering, double clustering, and discriminant analysis.The first part of the book illustrates how dimension reduction techniques synthesize available information by reducing the dimensionality of the data. The second part focuses on cluster and discriminant analy

  18. Laminate armor and related methods

    Science.gov (United States)

    Chu, Henry S; Lillo, Thomas M; Zagula, Thomas M

    2013-02-26

    Laminate armor and methods of manufacturing laminate armor. Specifically, laminate armor plates comprising a commercially pure titanium layer and a titanium alloy layer bonded to the commercially pure titanium outer layer are disclosed, wherein an average thickness of the titanium alloy inner layer is about four times an average thickness of the commercially pure titanium outer layer. In use, the titanium alloy layer is positioned facing an area to be protected. Additionally, roll-bonding methods for manufacturing laminate armor plates are disclosed.

  19. Computational Methods in Plasma Physics

    CERN Document Server

    Jardin, Stephen

    2010-01-01

    Assuming no prior knowledge of plasma physics or numerical methods, Computational Methods in Plasma Physics covers the computational mathematics and techniques needed to simulate magnetically confined plasmas in modern magnetic fusion experiments and future magnetic fusion reactors. Largely self-contained, the text presents the basic concepts necessary for the numerical solution of partial differential equations. Along with discussing numerical stability and accuracy, the author explores many of the algorithms used today in enough depth so that readers can analyze their stability, efficiency,

  20. Method for producing metallic nanoparticles

    Science.gov (United States)

    Phillips, Jonathan; Perry, William L.; Kroenke, William J.

    2004-02-10

    Method for producing metallic nanoparticles. The method includes generating an aerosol of solid metallic microparticles, generating non-oxidizing plasma with a plasma hot zone at a temperature sufficiently high to vaporize the microparticles into metal vapor, and directing the aerosol into the hot zone of the plasma. The microparticles vaporize in the hot zone to metal vapor. The metal vapor is directed away from the hot zone and to the plasma afterglow where it cools and condenses to form solid metallic nanoparticles.