WorldWideScience

Sample records for trans-actinide elements studied

  1. Few atom chemistry of the trans actinide element rutherfordium (Rf)

    International Nuclear Information System (INIS)

    Nagame, Y.

    2002-01-01

    Studies of chemical properties of the trans actinide elements - starting with element 104 (Rf) - offer the unique opportunity to obtain information about trends in the Periodic Table at the limits of nuclear stability and to assess the magnitude of the influence of relativistic effects on chemical properties. To explore experimentally the influence of relativistic effects of electron shell structure, we study the chemical properties of the trans actinide elements. So far, we have developed some experimental apparatuses for the study of chemical properties of the trans actinide elements: a beam-line safety system for the usage of the gas-jet coupled radioactive 248 Cm target chamber for the production of trans actinides, a rotating wheel catcher apparatus for the measurement of α particles and spontaneous fission decay of trans actinides and an automated rapid chemical separation apparatus based on high performance liquid chromatography. The trans actinide nuclide, the element 104, 261 Rf (t 1/2 = 78 s) has been successfully produced via the reactions of 248 Cm( 18 O,5n) at the JAERI (Japan Atomic Energy Research Institute) tandem accelerator. The evaluated production cross section was about 10 nb, indicating that the production rate was approximately 2 atoms per min. Because of the short half-life and the low production rate of Rf, each atom produced decays before a new atom is synthesized. It means that any chemistry to be performed must be done on an 'atom-at-a-time' basis. Therefore rapid, very efficient and selective chemical procedures are indispensable to isolate the desired trans actinide 261 Rf. To perform fast and repetitive ion-exchange separation of Rf, we have developed the apparatus AIDA (Automated Ion exchange separation system coupled with the Detection apparatus for Alpha spectroscopy). Recently, ion-exchange behavior of Rf in acidic solutions has been studied with AIDA, and the results indicate that anion-exchange behavior of Rf is quite similar

  2. On-line gas chemistry experiments with trans actinide elements

    International Nuclear Information System (INIS)

    Turler, A.; Gaguller, B.; Jost, D.T.

    1993-01-01

    The latest achievements in the gas phase chemistry studies of elements 104 and 105 and their lighter homologs are reviewed. Experimental techniques employed in the studies are described. Experimental data on chlorides and bromides of the groups 4, 5 elements and elements 104, 105 are compared with their theoretically predicted chemical properties. 45 refs

  3. Revamped half-lives of super heavy elements (SHE) in trans-actinide region

    International Nuclear Information System (INIS)

    Carmel Vigila Bai, G.M.; Umai Parvathiy, J.

    2015-01-01

    Analyzation of alpha decay properties and identification of Island of Stability has illuminated the theories of nuclear physics. This fundamental scientific research is the current ongoing work in the field of super heavy elements. In order to study the decay properties of super heavy elements a realistic model called as Cubic plus Yukawa plus Exponential (CYE) model is used here. This model uses a cubic potential in the pre-scission region connected by Coulomb plus Yukawa plus Exponential potential in the post scission region

  4. Nuclear chemistry of transactinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Nagame, Yuichiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-07-01

    The current status on the nuclear chemistry studies of transactinide elements is reviewed. The production of transactinides in heavy ion reactions is briefly discussed, and nuclear properties on the stability of transactinides are presented. Chemical properties of the trans-actinide elements 104, 105 and 106, and a typical experimental technique used to study these properties on an atom-at-a-time base are introduced. (author)

  5. Behaviour at the indicator scale of the elements Zr, Hf and 104, Nb,Ta and Pa (105) in very complexation media; Comportement a l`echelle des indicateurs des elements Zr, Hf, et 104, Nb, Ta, et Pa (105) en milieux tres complexants

    Energy Technology Data Exchange (ETDEWEB)

    Monroy Guzman, F. [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1997-12-31

    In order to determine the chemical properties of the trans-actinide elements of Z = 104 and 105 in aqueous solutions we studied their behaviour to ion exchange resin in different complex media. Due to the very short lifetimes (some tens of seconds) et to the low yield of these elements (a few atoms per irradiation hour) only very fast radiochemical techniques can be used. These severe constraints impose comparative studies of these elements with their most likely homologues to be carried out. The corresponding homologues were the elements of group 4 (Zr and Hf) for the element 104 and the elements of group 5 (Nb and Ta) and also Pa for the element 105. The complexation properties of the elements at indicator scale were determined in the media of HF, NH{sub 4}/HClO{sub 4}, NH{sub 4}SCN/HClO{sub 4}, NH{sub 4}SCN/HF and HCl/HF by ion exchange chromatography. The studies in fluorides media allowed us to identify the complexes in solution and to explain the shape of the experimentally observed sorption curves. The decrease of sorption for higher acid concentration in case of HF/HCl medium was interpreted by formation of chloro-fluoro-complexes. In case of the mixture NH{sub 4}SCN/HF, the particularly pronounced anti-synergic effects were observed and discussed. At the same time studies of the Hf and Ta short-lived isotopes were carried out by means of the RACHEL facility operating by the Orsay Tandem accelerator. These realistic simulations allowed optimization of different production, transportation and separation stages of the trans-actinide elements. The two experiments of 104 element production showed that this element forms in HF very stable anionic complexes similarly to its homologues Zr and Hf. (authors). 181 refs.

  6. Behaviour at the indicator scale of the elements Zr, Hf and 104, Nb,Ta and Pa (105) in very complexation media; Comportement a l`echelle des indicateurs des elements Zr, Hf, et 104, Nb, Ta, et Pa (105) en milieux tres complexants

    Energy Technology Data Exchange (ETDEWEB)

    Monroy Guzman, F [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1998-12-31

    In order to determine the chemical properties of the trans-actinide elements of Z = 104 and 105 in aqueous solutions we studied their behaviour to ion exchange resin in different complex media. Due to the very short lifetimes (some tens of seconds) et to the low yield of these elements (a few atoms per irradiation hour) only very fast radiochemical techniques can be used. These severe constraints impose comparative studies of these elements with their most likely homologues to be carried out. The corresponding homologues were the elements of group 4 (Zr and Hf) for the element 104 and the elements of group 5 (Nb and Ta) and also Pa for the element 105. The complexation properties of the elements at indicator scale were determined in the media of HF, NH{sub 4}/HClO{sub 4}, NH{sub 4}SCN/HClO{sub 4}, NH{sub 4}SCN/HF and HCl/HF by ion exchange chromatography. The studies in fluorides media allowed us to identify the complexes in solution and to explain the shape of the experimentally observed sorption curves. The decrease of sorption for higher acid concentration in case of HF/HCl medium was interpreted by formation of chloro-fluoro-complexes. In case of the mixture NH{sub 4}SCN/HF, the particularly pronounced anti-synergic effects were observed and discussed. At the same time studies of the Hf and Ta short-lived isotopes were carried out by means of the RACHEL facility operating by the Orsay Tandem accelerator. These realistic simulations allowed optimization of different production, transportation and separation stages of the trans-actinide elements. The two experiments of 104 element production showed that this element forms in HF very stable anionic complexes similarly to its homologues Zr and Hf. (authors). 181 refs.

  7. Superheavy element chemistry. Achievements and perspectives

    International Nuclear Information System (INIS)

    Schaedel, M.

    2007-01-01

    Superheavy elements have been synthesized and chemically characterized one-atom-at-a-time up to element 108. Presently, the quest for element 112 is one of the hottest topics in this field. The transactinide elements 104 to 108 are members of group 4 to 8 of the Periodic Table and element 112 belongs into group 12. Chemical properties of some of these elements, like elements 104 and 105, show stunning deviations from simple extrapolations within their respective group while others exhibit great similarities with their lighter homologues elements. First experiments to investigate seaborgium (Sg, element 106) in aqueous solution were performed. Again, in large international collaborations at the GSI, several gas-phase chemistry experiments were performed with hassium (Hs, element 108). Recently, the highly efficient and very clean separation of Hs was applied for nuclear studies of various Hs nuclides investigating their cross section and their nuclear decay properties in the region of the doubly-magic 270 Hs (Z=108, N=162). To overcome certain limitations of the presently used on-line chemical separations the new TransActinide Separation and Chemistry Apparatus (TASCA) - with a gas-filled recoil separator as a front-end tool - was designed and built at the GSI in a collaborative effort. Presently in its commissioning phase, TASCA shall be a key instrument for a big leap into quantitatively and qualitatively new experiments in the region of superheavy elements. (author)

  8. Study of Superheavy Elements

    International Nuclear Information System (INIS)

    Hofmann, Sigurd

    2007-01-01

    The nuclear shell model predicts that the next doubly magic shell-closure beyond 208 Pb is at a proton number Z = 114, 120, or 126 and at a neutron number N = 172 or 184. The outstanding aim of experimental investigations is the exploration of this region of spherical 'SuperHeavy Elements' (SHEs). Experimental methods are described, which allowed for the identification of elements produced on a cross-section level of about 1 pb. The decay data reveal that for the heaviest elements, the dominant decay mode is alpha emission, not fission. Decay properties as well as reaction cross-sections are compared with results of theoretical investigations. Finally, plans are presented for the further development of the experimental set-up and the application of new techniques, as for instance the precise mass measurement of the produced nuclei using ion traps. At increased sensitivity, the detailed exploration of the region of spherical SHEs will start, after first steps on the island were made in recent years. (Author)

  9. Toward an accurate description of solid-state properties of superheavy elements

    Directory of Open Access Journals (Sweden)

    Schwerdtfeger Peter

    2016-01-01

    Full Text Available In the last two decades cold and hot fusion experiments lead to the production of new elements for the Periodic Table up to nuclear charge 118. Recent developments in relativistic quantum theory have made it possible to obtain accurate electronic properties for the trans-actinide elements with the aim to predict their potential chemical and physical behaviour. Here we report on first results of solid-state calculations for Og (element 118 to support future atom-at-a-time gas-phase adsorption experiments on surfaces such as gold or quartz.

  10. Experimental Study of Elements Promoting Mixing in Fuel Elements

    International Nuclear Information System (INIS)

    Silin, Nicolas; Juanico, Luis; Delmastro, Dario

    2003-01-01

    In the present work a thermal tracing technique is used to measure the increase of the mixing between subchannels in the presence of different mixing elements.As representative elements a spacer, a spacer with mixing vanes and turbulence promoter buttons were considered.The performance of these elements was evaluated by studying the behavior of a thermal trace in each case.Also the pressure drop for each case is presented.The results present a qualitative and quantitative guide for the application of each one of these appendages in future nuclear elements

  11. Multi Elemental Study Using Prompt Gamma Technique

    International Nuclear Information System (INIS)

    Normanshah Dahing; Muhamad Samudi Yasir; Normanshah Dahing; Hanafi Ithnin; Mohd Fitri Abdul Rahman; Hearie Hassan

    2016-01-01

    In this study, principle of prompt gamma neutron activation analysis has been used as a technique to determine the elements in the sample. The system consists of collimated isotopic neutron source, Cf-252 with HPGe detector and Multichannel Analysis (MCA). Concrete with size of 10x10x10 cm 3 and 15x15x15 cm 3 were analysed as sample. When neutrons enter and interact with elements in the concrete, the neutron capture reaction will occur and produce characteristic prompt gamma ray of the elements. The preliminary result of this study demonstrate the major element in the concrete was determined such as Si, Mg, Ca, Al, Fe and H as well as others element, such as Cl by analysis the gamma ray lines respectively. The results obtained were compared with computer simulation, NAA and XRF as a part of reference and validation. The potential and the capability of neutron induced prompt gamma as tool for multi elemental analysis qualitatively to identify the elements present in the concrete sample discussed. (author)

  12. Elemental bioaccumulators in air pollution studies

    International Nuclear Information System (INIS)

    Freitas, M.C.

    1995-01-01

    K 0 -Based instrumental neutron activation analysis (k 0 INAA) was used to determine the concentrations of Cr, Fe, Co, Zn, Se, Sb and Hg in the vascular plants Cistus salvifolius and Inula viscosa and in the lichen Parmelia sulcata. The samples were collected in the neighbourhood of industrial complexes. The elemental accumulation in the vascular plants and the lichen are compared to optimize the choice of the bioaccumulator. It is concluded that P.sulcata seems to be the best accumulator of the three species for the element studied; Cistus salvifolius is sensitive to the contents of Zn, Fe, Cr and Sb in the air; Inula viscosa seems to accumulate Fe, Sb, Co, Cr and Zn. Nevertheless, it is concluded that lichen is a good air pollution indicator, while the vascular plants are not due to the large seasonal variations found in the elemental concentrations. (author) 11 refs.; 7 figs.; 2 tabs

  13. Spectroscopic studies of the transplutonium elements

    International Nuclear Information System (INIS)

    Carnall, W.T.; Conway, J.G.

    1983-01-01

    The challenging opportunity to develop insights into both atomic structure and the effects of bonding in compounds makes the study of actinide spectroscopy a particularly fruitful and exciting area of scientific endeavor. It is also the interpretation of f-element spectra that has stimulated the development of the most sophisticated theoretical modeling attempted for any elements in the periodic table. The unique nature of the spectra and the wealth of fine detail revealed make possible sensitive tests of both physical models and the results of Hartree-Fock type ab initio calculations. This paper focuses on the unique character of heavy actinide spectroscopy. It discusses how it differs from that of the lighter member of the series and what are the special properties that are manifested. Following the introduction, the paper covers the following: (1) the role of systematic studies and the relationships of heavy-actinide spectroscopy to ongoing spectroscopic investigations of the lighter members of the series; (2) atomic (free-ion) spectra which covers the present status of spectroscopic studies with transplutonium elements, and future needs and directions in atomic spectroscopy; (3) the spectra of actinide compounds which covers the present status and future directions of spectroscopic studies with compounds of the transplutonium elements; and other spectroscopies. 1 figure, 2 tables

  14. Trace element studies at University of Pittsburgh

    International Nuclear Information System (INIS)

    Cohen, B.L.; Chan, K.C.; Shabason, L.; Wedberg, G.; Rudolph, H.

    1974-01-01

    Seven areas of research are discussed. A method was developed for analyzing samples for their major constituent elements by irradiating with protons and detecting prompt gamma rays, mostly produced in (p,p'γ) reactions. Among other applications, the method was used to analyze air particulates for C, N, O, Al, Si, S, Co, and Fe. Trace element analysis by proton or alpha particle induced x-ray fluorescence was used on thin samples in a study of the variations of Pb, Br, Fe, and Zn in air particulates as a function of time. Among other applications this method was also used in studying trace elements in rainwater. An x-ray fluorescence method that is effective in the analysis of thick samples was developed. A method based on measuring energies of elastically scattered protons was developed for the analysis of light elements. The use of proton and neutron activation analyses, as well as methods for studying depth profiles for hydrogen and helium in materials are discussed

  15. Preparation and study of elemental californium-249

    International Nuclear Information System (INIS)

    Noe, M.; Peterson, J.R.

    1975-01-01

    Bulk samples of 249 Cf metal were prepared on the 10 μg scale via the Li metal vapor reduction of 249 CfF 3 . Above about 725 0 C elemental Cf exhibits a face-centered cubic (fcc) structure with an average, room-temperature lattice parameter of 5.75(1)A. Between about 600 0 C and 725 0 C, the stable form of Cf metal is another fcc structure with an average, room-temperature lattice parameter of 4.94(1)A. Below 600 0 C metallic Cf exhibits a double hexagonal closest packed (dhcp) structure with average, room temperature lattice parameters of a 0 = 3.39(1)A and c 0 = 11.01(5)A. By comparison of the metallic radii calculated for these three forms with those of the receding transuranium elements, it is suggested that the two, lower temperature modifications represent Cf with a metallic valence of three, while the highest temperature form represents a metallic valence of two. Although the data reported here are from the most complete study to date of elemental Cf, the limitations accompanying such microscale research are duly noted. (U.S.)

  16. Behaviour of the homologues of Rf and Db in complexing media

    International Nuclear Information System (INIS)

    Trubert, D.; Monroy Guzman, F.; Hussonnois, M.; Brillard, L.; Le Naour, C.; Servajean, V.; Constantinescu, O.; Constantinescu, M.; Ardisson, G.; Barci, V.; Weiss, B.

    1999-01-01

    In order to study the chemical behaviour of the trans-actinide elements, the chemical properties of their most probable homologues have been investigated by ion exchange methods in various complexing media. A new chromatographic method allowing the determination of distribution coefficients in the case o short-lived isotopes has been developed and successfully tested with the RACHEL device. (authors)

  17. A study on human hair element content as monitor for trace elements pollution in Eg

    International Nuclear Information System (INIS)

    Tadros, N.; Metwally, E.

    2004-01-01

    Trace element content in human is a suitable indicator of exposure to trace element pollutants. Concentration levels of 12 trace elements in human head hair samples collected from more than 23 individuals have been determined. The collected hair samples were classified into four groups collected from workers at nuclear research center and others far away from the center. Neutron activation analysis technique was used in the preset study. The data reported for trace elements content in different hair samples were discussed. Significant differences were observed for several elements levels. comparative studies demonstrated that the concentration of some elements in hair of exposed workers, are greater than those corresponding to non exposed workers. Also, there was no clear significant correlation between the elements content of different hair samples and the age of the donors

  18. Relativistic quantum chemistry of the superheavy elements. Closed-shell element 114 as a case study

    International Nuclear Information System (INIS)

    Schwerdtfeger, Peter; Seth, Michael

    2002-01-01

    The chemistry of superheavy element 114 is reviewed. The ground state of element 114 is closed shell [112]7s 2 7p 1/2 2 and shows a distinct chemical inertness (low reactivity). This inertness makes it rather difficult to study the atom-at-a-time chemistry of 114 in the gas or liquid phase. (author)

  19. Studies on tender wheatgrass: estimation of elemental content, bioaccessibility of essential elements and antioxidant activity

    International Nuclear Information System (INIS)

    Reddy, A.V.R.; Acharya, R.; Nair, A.G.C.; Kulkarni, S.D.; Rajurkar, N.S.

    2008-08-01

    Tender wheatgrass is being consumed by human beings in juice form or as it is due to its antioxidant potential and medicinal value. Systematic studies were carried out to (i) estimate elemental profiles as a function of growth period and conditions, bioaccessibility of different elements and the antioxidant potential of the tender wheatgrass, (ii) determine the optimum growth period for obtaining maximum benefit and (iii) examine the possible correlation between antioxidant potential and mineral content. Wheatgrass was grown in four different conditions namely (i) tap water, (ii) tap water with nutrients, (iii) soil and tap water and (iv) soil with nutrient solution. The studies were carried out on the wheatgrass of 5-20 days old. For comparison with laboratory grown wheatgrass, a set of commercially available wheatgrass tablets and wheat seeds were also studied. Instrumental neutron activation analysis (INAA) was used for concentration determination of elements in the wheatgrass, wheat seeds and wheatgrass tablets. A total of 15 elements like Na, K, Ca, Mg, Mn, Br, Fe and Zn were determined in the samples of shoots and roots of tender wheatgrass. A comparison with the recommended dietary allowance (RDA) of different essential elements with that in tender wheatgrass revealed that wheatgrass is a good source of minerals for health benefits rather than a food supplement. Bioaccessible fractions of various elements were estimated by a chemical NAA method by subjecting the samples to in vitro gastric and gastro-intestinal digestion followed by NAA. The bioaccessibility concentrations by both the measurements were in the range of 9-60%. It was found that bioaccessibility of the elements studied was the highest from fresh wheatgrass and the lowest from wheat seeds. Accuracy of the NAA method was evaluated by analyzing two biological reference materials, SRM 1573a (Tomato leaves) from NIST, USA and ICHTJ CTA-vtl-2 (Tobacco leaves) from INCT, Poland. The antioxidant

  20. Synthesis Study of a 6-Element Non-Uniform Array with Tilted Elements for CLARREO Project

    Science.gov (United States)

    Jamnejad, Vahraz; Hoorfar, Ahmad

    2012-01-01

    This paper presents the results of a preliminary study of the gain/pattern properties of a 6-element Radio Occultation (RO) array for the proposed CLARREO (Climate Absolute Radiance and Refractivity Observatory (CLARREO) Project. CLARREO is one of the 4 highest priority missions recommended in the National Research Council Earth Science Decadal Survey.

  1. Model studying the processes arising during fuel element overheating

    International Nuclear Information System (INIS)

    Usynin, G.B.; Anoshkin, Yu.I.; Vlasichev, G.N.; Galitskikh, Yu.N.; Semenychev, M.A.

    1986-01-01

    A calculational technique for studying heating and melting of fuel elements in the BN type reactors during an accident with heat release failure and a simulator with central rod heater intended for out-of-pile experiments is developed. The time rangeof the characteristic melting steps for the most thermally stressed fuel element at the reactor nominal power is calculated. The experimental study of the fuel element melting using a simulator with a tungsten heater has proved that the technique for the simultor and fuel can melting, respectively, is correct. The developed technique is used for determining the geometrical values and operational conditions for experiments with simulators, when quantitative and qualitative characteristics of the process under study are rather close to those natural for fuel elements

  2. Speciation of trace elements in the environmental studies

    International Nuclear Information System (INIS)

    Reddy, A.V.R.

    2012-01-01

    Elements present at trace levels, often referred as trace elements, play an important role in the environment and in the functioning of life on our planet. Trace elements in environment present as free metal ions or incorporated into colloids or attached to particulate matter or exist in different physical and chemical forms. It is well established that some elements are highly toxic and some are essential, but can become toxic at higher doses. It is also now known that the forms of elements (speciation) and their amounts are more important than the chemical dose of the elements as their interaction depends on different species. For example, Cr(VI) ions are considered far more toxic than Cr(III), whereas As(III) is more toxic than As(V). Similarly, in the case of mercury, both methylmercury and inorganic mercury are toxic but they show different levels of toxicity. Thus the adverse effects depend on the nature of species of the elements and therefore speciation studies are of paramount importance in many areas like toxicology, environmental chemistry and geochemisty. In view of this, speciation studies is a challenge to analytical chemists as the measurement methodologies have to be carefully developed, validated and applied. The grand challenge is to obtain quality data ensuring traceability, as the data obtained will be used in modeling for predicting the environmental impacts. In this talk importance of speciation and challenges to environmental analytical chemists will be discussed along with the following three speciation studies on Cr, U and Hg which were carried out in our laboratories

  3. STUDIES OF CHOSEN TOXIC ELEMENTS CONCENTRATION IN MULTIFLOWER BEE HONEY

    Directory of Open Access Journals (Sweden)

    Ewa Popiela

    2011-04-01

    Full Text Available 72 544x376 Normal 0 21 false false false  The aim of the study was to determine the bioaccumulation level of chosen toxic elements (Zn, Cu, Pb, As and Cd in multiflower honey collected from Brzeg area. Biological material (honey was mineralized using the microwave technique at an elevated pressure in the microprocessor station of pressure in the type Mars 5. Quantitative analysis of elements (As, Cd, Cu, Pb and Zn was performed by plasma spectrometry method using a Varian ICP-AES apparatus. The presence of toxic elements was determined in examined biological materials. The elements fallowed the fallowing decreasing order with respect to their content of honey: Zn>Cu>Pb>As>Cd. The average concentrations of studied elements observed in multi-flower honey were as follows: 6.24 mg.kg-1 of zinc, 2.75 mg.kg-1 of copper, 0.53, 0.071, 0.042 mg.kg-1of lead, arsenic and cadmium, respectively. Lead was the most problematic in bee honey because its average content exceeded the maximum acceptable concentration. Additionally, this metal concentration was 60% higher in studied samples than allowable standard of lead content.doi:10.5219/134 

  4. Experimental study on radiation resistant properties of seismic isolation elements

    International Nuclear Information System (INIS)

    Yoneda, G.; Nojima, O.; Aizawa, S.; Uchiyama, Y.; Ikenaga, M.; Yoshizawa, T.

    1991-01-01

    Recently, studies on the application of a seismic isolation system to a reactor building and or the equipment of a nuclear power plant has been carried out. This study aims at investigating the influence which is exerted upon the mechanical properties of the seismic isolation elements by radiation. The authors conducted irradiation tests, using γ rays, on natural rubber bearings (NRB), lead rubber bearings (LRB), high damping rubber bearings (HRB), and the viscous fluid used in viscous dampers. The maximum radiation intensity was 5 x 10 7 R (Roentgen). The comparison between the mechanical properties of each seismic isolation element before and after the irradiation test are reported in the following. (author)

  5. Studies of Flerovium and Element 115 Homologs with Macrocyclic Extractants

    Energy Technology Data Exchange (ETDEWEB)

    Despotopulos, John D. [Univ. of Nevada, Las Vegas, NV (United States)

    2015-03-12

    Study of the chemistry of the heaviest elements, Z ≥ 104, poses a unique challenge due to their low production cross-sections and short half-lives. Chemistry also must be studied on the one-atom-at-a-time scale, requiring automated, fast, and very efficient chemical schemes. Recent studies of the chemical behavior of copernicium (Cn, element 112) and flerovium (Fl, element 114) together with the discovery of isotopes of these elements with half-lives suitable for chemical studies have spurred a renewed interest in the development of rapid systems designed to study the chemical properties of elements with Z ≥ 114. This dissertation explores both extraction chromatography and solvent extraction as methods for development of a rapid chemical separation scheme for the homologs of flerovium (Pb, Sn, Hg) and element 115 (Bi, Sb), with the goal of developing a chemical scheme that, in the future, can be applied to on-line chemistry of both Fl and element 115. Carrier-free radionuclides, used in these studies, of the homologs of Fl and element 115 were obtained by proton activation of high-purity metal foils at the Lawrence Livermore National Laboratory (LLNL) Center for Accelerator Mass Spectrometry (CAMS): natIn(p,n)113Sn, natSn(p,n)124Sb, and Au(p,n)197m,gHg. The carrier-free activity was separated from the foils by novel separation schemes based on ion exchange and extraction chromatography techniques. Carrier-free Pb and Bi isotopes were obtained from development of a novel generator based on cation exchange chromatography using the 232U parent to generate 212Pb and 212Bi. Macrocyclic extractants, specifically crown ethers and their derivatives, were chosen for these studies; crown ethers show high selectivity for metal ions. Finally. a potential chemical system for Fl was established based on the Eichrom Pb resin, and insight to an improved system based on thiacrown ethers is

  6. Study of trace elements distribution in various tissues structures

    International Nuclear Information System (INIS)

    Kwiatek, W.M.; Marczewska, E.

    1994-01-01

    Many papers have been written during the past ten years about TE study in cancer and normal tissues describing the use of different methods for detection of trace elements. Concentration of TE depends strongly on the sample measured. However, according to our knowledge, the role of TE in cancerous tissue is still known. Therefore, we propose to perform an experiment which will hopefully given us more information about the relationship between the concentration of elements in different tissues. The developing industry localised near Cracow becomes a serious danger for health of it's inhabitants. The negative influence of the air pollution to the living organisms is seen not only in the nature but also in humans. Therefore we want to analyse the trace element contents in the air. Such investigation will give the information about the pollution level in the City. The pollution has its obvious negative influence to health and toxic element concentration level in blood. It is interesting to check if placenta plays an effective role in foetus protection against toxic metals. In order to study this problem, the trace element analysis of placenta tissues will be done by means of synchrotron microbeam. (author). 1 ref

  7. A study on some trace elements in Chilean seafood

    International Nuclear Information System (INIS)

    Gras, N.; Munoz, L.; Thieck, M.; Hurtado, S.

    1993-01-01

    Levels of essential and toxic trace elements in six marine species greatly in demand in the international market (canned pink clams, razor clams, clams, king crab, sardines, and frozen albacore tuna fish) were studied. A special laboratory adequately equipped for handling and preparing biological materials, is described. The elements As, Br, Na, Se, Hg, Cr, Fe, Zn and Rb were determined by INAA, while copper and cadmium content were determined using RNAA. Significant differences were found on comparing the contents of some toxic elements in mollusk and other samples of marine food. Various certified reference materials (CRMs) of the IAEA, NIST and NIES were analyzed for quality assurance purposes. (author) 11 refs.; 1 fig.; 1 tab

  8. A study on some trace elements in Chilean seafood

    Energy Technology Data Exchange (ETDEWEB)

    Gras, N; Munoz, L; Thieck, M; Hurtado, S [Comision Chilena de Energia Nuclear, Santiago (Chile). Lab. of Activation Analysis

    1993-03-01

    Levels of essential and toxic trace elements in six marine species greatly in demand in the international market (canned pink clams, razor clams, clams, king crab, sardines, and frozen albacore tuna fish) were studied. A special laboratory adequately equipped for handling and preparing biological materials, is described. The elements As, Br, Na, Se, Hg, Cr, Fe, Zn and Rb were determined by INAA, while copper and cadmium content were determined using RNAA. Significant differences were found on comparing the contents of some toxic elements in mollusk and other samples of marine food. Various certified reference materials (CRMs) of the IAEA, NIST and NIES were analyzed for quality assurance purposes. (author) 11 refs.; 1 fig.; 1 tab.

  9. Total hip reconstruction in acetabular dysplasia : a finite element study

    NARCIS (Netherlands)

    Schüller, H.M.; Dalstra, M.; Huiskes, H.W.J.; Marti, R.K.

    1993-01-01

    In acetabular dysplasia, fixation of the acetabular component of a cemented total hip prosthesis may be insecure and superolateral bone grafts are often used to augment the acetabular roof. We used finite element analysis to study the mechanical importance of the lateral acetabular roof and found

  10. Multitracer study on uptake of elements by plants

    International Nuclear Information System (INIS)

    Ambe, Shizuko

    1996-01-01

    A disk target of Au or Ag was irradiated with a 135-MeV/nucleon 12 C, 14 N, or 16 O beam accelerated by the RIKEN Ring Cyclotron. Multitracer solutions were prepared radiochemically from the targets in carrier- and salt-free states. Rice and soybean plants were cultured in a nutrient solution or on soil containing a multitracer. In the experiment of absorption of elements through leaves, either soybean plants were grown in the atmosphere where multitracer-adsorbed cellulose particles were floating in the air or two drops of a multitracer solution was applied onto leaves of Japanese radish. After cultivation, the plants were harvested and they were dried at 65degC for one day and subjected to γ-ray measurement with HPGe detectors. In the case of hydroponically cultured plants, large amounts of almost all of the metal ions in the nutrient solution were absorbed by the roots. In contrast, plants grown on the soil gave extremely low percentage distributions for all the elements examined. This difference is explained by the low distribution of metal ions in soil water and the dilution of radioisotopes with the corresponding elements in soil. When the multitracer is added to soil, adsorption of each radioisotope takes place, resulting in the small partition in soil water. Relatively large amounts of Se, Rb, and Co were accumulated in the seeds of soybean plants which were grown in the presence of floating multitracer-adsorbed cellulose particles in the air. Since the seeds were not directly exposed, the elements detected in the seeds are considered to be transported to the seeds after absorption through leaves. When the multitracer solution were applied onto the leaves, Zn, Rb, Sr, and Mn were absorbed and transported quickly compared with other elements from the application site to other parts of the plant. These results obtained demonstrate that the multitracer technique is powerful in studies on absorption and transport of trace elements in plants. (J.P.N.)

  11. Multitracer study on uptake of elements by plants

    Energy Technology Data Exchange (ETDEWEB)

    Ambe, Shizuko [Institute of Physical and Chemical Research, Wako, Saitama (Japan)

    1996-12-31

    A disk target of Au or Ag was irradiated with a 135-MeV/nucleon {sup 12}C, {sup 14}N, or {sup 16}O beam. Multitracer solutions were prepared radiochemically from the targets in carrier- and salt-free states. Rice and soybean plants were cultured in a nutrient solution or on soil containing a multitracer. In the experiment of absorption of elements through leaves, either soybean plants were grown in the atmosphere where multitracer-adsorbed cellulose particles were floating in the air or two drops of a multitracer solution was applied onto leaves of Japanese radish. After cultivation, the plants were harvested and they were dried at 65degC for one day and subjected to {gamma}-ray measurement with HPGe detectors. In the case of hydroponically cultured plants, large amounts of almost all of the metal ions in the nutrient solution were absorbed by the roots. In contrast, plants grown on the soil gave extremely low percentage distributions for all the elements examined. This difference is explained by the low distribution of metal ions in soil water and the dilution of radioisotopes with the corresponding elements in soil. When the multitracer is added to soil, adsorption of each radioisotope takes place, resulting in the small partition in soil water. Relatively large amounts of Se, Rb, and Co were accumulated in the seeds of soybean plants which were grown in the presence of floating multitracer-adsorbed cellulose particles in the air. Since the seeds were not directly exposed, the elements detected in the seeds are considered to be transported to the seeds after absorption through leaves. When the multitracer solution were applied onto the leaves, Zn, Rb, Sr, and Mn were absorbed and transported quickly compared with other elements from the application site to other parts of the plant. These results obtained demonstrate that the multitracer technique is powerful in studies on absorption and transport of trace elements in plants. (J.P.N.)

  12. The study of the elemental composition of peppermint (Mentha piperita

    Directory of Open Access Journals (Sweden)

    K. V. Andrianov

    2014-12-01

    Full Text Available Introduction Our attention was drawn by quite widespread plant, namely peppermint (Mentha piperita of mint family (Lamiaceae L.. It isn’t known as a wild-growing plant, this plant is the hybrid received from crossing water mint (Mentha aquatica with a spicate mint (Mentha spicata or green mint (Mentha viridis. Therapeutic action of plant is caused by the BAS complex, among which essential oil, alkaloids, saponins, organic acids, vitamins, macro - and microelements are. Accumulation of elements in a plant directly depends on sort and species of this plant, climatic conditions and geographical places of growth. Thus, using pharmacognosic research of peppermint, it would be expedient to carry out the comparative analysis of the elements content in leaf of widespread species of this plant, and also to compare to element structure of peppermint from other region of preparation. Studying qualitative structure and quantitative content of macro - and microelements in leaf of 3 samples of peppermint became the purpose of our research. Materials and methods of research The peppermint leaves of 3 samples were the object of our research. They are ‘Chornolistaya’ sort – the sample #1, ‘Zgadka’ sort – the sample #2 (the stocking up place is Dnepropetrovsk region, 2013 and peppermint - the sample #3 (the stocking place is Lebanon, Baalbek surroundings, 2013. In order to study elemental structure of peppermint leaves, atomic emission spectrometry with photographic registration was used. Results and discussions All types of raw materials had identical element structure. According to the content in each type of raw materials, compositions can be divided into some groups: the first one – the content of element was near or above 1000 mg /100 g, the content was higher than 100 mg /100 g, the content of composition was lower than 100 mg /100 g and below than 1 mg /100 g. Thus, the ambit between these groups was deeply emphasized. The following

  13. Studies on absorption coefficient near edge of multi elements

    International Nuclear Information System (INIS)

    Eisa, M.H.; Shen, H.; Yao, H.Y.; Mi, Y.; Zhou, Z.Y.; Hu, T.D.; Xie, Y.N.

    2005-01-01

    X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained

  14. Studies on absorption coefficient near edge of multi elements

    Science.gov (United States)

    Eisa, M. H.; Shen, H.; Yao, H. Y.; Mi, Y.; Zhou, Z. Y.; Hu, T. D.; Xie, Y. N.

    2005-12-01

    X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained.

  15. A Study on the Effect of Cohesive Laws on Finite Element Analysis of Crack Propagation Using Cohesive Elements

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Hyeongseok; Baek, Hyungchan; Kim, Hyungyu [Seoul Nat' l Univ. of Sci. and Tech., Seoul (Korea, Republic of)

    2014-04-15

    In this paper, the effect of cohesive laws on the finite element analysis of crack propagation using cohesive elements is investigated through three-point bending and double cantilever beam problems. The cohesive elements are implemented into ABAQUS/Standard user subroutines(UEL), and the shape of cohesive law is varied by changing parameters in polynomial functions of cohesive traction-separation relations. In particular, crack propagation behaviors are studied by comparing load-displacement curves of the analysis models which have different shapes of cohesive laws with the same values of fracture energy and cohesive strength. Furthermore, the influence of the element size on crack propagation is discussed in this study.

  16. Instrumental neutron activation analysis in environmental studies of trace elements

    International Nuclear Information System (INIS)

    Salmon, L.

    1975-06-01

    The application of a routine instrumental nuclear method is described in relation to environmental surveys and studies. A working rather than formal review is made of the techniques applied with particular reference to the data processing methods involved. The elements measured by instrumental activation analysis were: Ag, Al, As, Au, Ba, Br, Ca, Ce, Cl, Cd, Co, Cr, Cs, Cu, Fe, Hg, I, In, La, Mn, Na, Ni, Pb, Rb, Sb, Sc, Se, Th, Ti, U, V, W, Zn. (author)

  17. Study on the fragility of structure with several elements in its story. Part 2: structure with ductile elements

    International Nuclear Information System (INIS)

    Kai, Y.; Fukushima, S.

    1995-01-01

    The relationship among the fragility of element, that of story and that of system, is examined using the Monte Carlo simulation. In this study, 2-story models whose stories consist of 2 ductile elements are employed. A method is proposed which includes a nonlinear effect into the evaluation of elements capacities. This method does not require the nonlinear MCS, therefore saving computational efforts. Also, a method to estimate the stories and the system fragilities is proposed. (author). 2 refs., 7 figs., 3 tabs

  18. Space station accommodations for lunar base elements: A study

    Science.gov (United States)

    Weidman, Deene J.; Cirillo, William; Llewellyn, Charles; Kaszubowski, Martin; Kienlen, E. Michael, Jr.

    1987-01-01

    The results of a study conducted at NASA-LaRC to assess the impact on the space station of accommodating a Manned Lunar Base are documented. Included in the study are assembly activities for all infrastructure components, resupply and operations support for lunar base elements, crew activity requirements, the effect of lunar activities on Cape Kennedy operations, and the effect on space station science missions. Technology needs to prepare for such missions are also defined. Results of the study indicate that the space station can support the manned lunar base missions with the addition of a Fuel Depot Facility and a heavy lift launch vehicle to support the large launch requirements.

  19. Geochemical study of trace elements in micrograin minerals

    Energy Technology Data Exchange (ETDEWEB)

    Toyoda, Kazuhiro; Shinozuka, Yoshitsugu; Imai, Shiho; Baba, Naoho; Machii, Tami; Shimada, Mitsuo; Hasebe, Kiyoshi [Hokkaido Univ., Sapporo (Japan)

    1998-01-01

    Abstract of five papers are contained in this paper. 1. Neutron activation analysis of iridium in Japan P/T boundary layer sample. Iridium of Permian/Triassic (P/T) boundary layer samples in Japan are determined. A collision of materials outside of the earth was not proved. 2. Adsorbability of rare earth elements by biogenic phosphate salt particles. Phosphate minerals are very strong adsorbent of rare earth elements, so that they can use as the removal materials of them in radioactive waste. 3. Analysis of undecomposed minerals and irresoluble compounds in acid decomposed residue. In order to investigate the past global changes, a micro wave heat method was studied and good results were obtained. 4. Determination of iridium in tsunami deposits in Cuba. Very small amount of iridium was discovered in the samples. 5. Activation analysis of iridium in the sample of 300 m core of Baikal lake. (Plan). (S.Y.)

  20. Australis: AMS for ultra sensitive trace element and isotopic studies

    Energy Technology Data Exchange (ETDEWEB)

    Sie, S H; Suter, G F [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

    1994-12-31

    The accelerator mass spectrometer (AMS) at the CSIRO HIAF laboratory is being upgraded to enable in-situ measurements of ultratraces and isotopic-ratios in mineralogical applications. The upgraded system will include a microbeam Cs ion source which is designed to produce better than 50 micrometre diameter Cs beam to enable analyses of monomineralic grains. The Cs primary beam will be mass analysed in order to minimize contamination of the sample. The detection system will be upgraded to enable analyses of elements up to U, at 2 MV terminal voltage for charge states 4 and 5. The system will be known as AUSTRALIS: A.M.S. for Ultra Sensitive TRAce eLement and Isotopic Studies. An overview of the system and the anticipated applications in minerals exploration and mining research are presented. 4 refs., 1 fig.

  1. Australis: AMS for ultra sensitive trace element and isotopic studies

    Energy Technology Data Exchange (ETDEWEB)

    Sie, S.H.; Suter, G.F. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

    1993-12-31

    The accelerator mass spectrometer (AMS) at the CSIRO HIAF laboratory is being upgraded to enable in-situ measurements of ultratraces and isotopic-ratios in mineralogical applications. The upgraded system will include a microbeam Cs ion source which is designed to produce better than 50 micrometre diameter Cs beam to enable analyses of monomineralic grains. The Cs primary beam will be mass analysed in order to minimize contamination of the sample. The detection system will be upgraded to enable analyses of elements up to U, at 2 MV terminal voltage for charge states 4 and 5. The system will be known as AUSTRALIS: A.M.S. for Ultra Sensitive TRAce eLement and Isotopic Studies. An overview of the system and the anticipated applications in minerals exploration and mining research are presented. 4 refs., 1 fig.

  2. Australis: AMS for ultra sensitive trace element and isotopic studies

    International Nuclear Information System (INIS)

    Sie, S.H.; Suter, G.F.

    1993-01-01

    The accelerator mass spectrometer (AMS) at the CSIRO HIAF laboratory is being upgraded to enable in-situ measurements of ultratraces and isotopic-ratios in mineralogical applications. The upgraded system will include a microbeam Cs ion source which is designed to produce better than 50 micrometre diameter Cs beam to enable analyses of monomineralic grains. The Cs primary beam will be mass analysed in order to minimize contamination of the sample. The detection system will be upgraded to enable analyses of elements up to U, at 2 MV terminal voltage for charge states 4 and 5. The system will be known as AUSTRALIS: A.M.S. for Ultra Sensitive TRAce eLement and Isotopic Studies. An overview of the system and the anticipated applications in minerals exploration and mining research are presented. 4 refs., 1 fig

  3. Studies of kinematic elements in two multicenter sunspot groups

    International Nuclear Information System (INIS)

    Korobova, Z.B.

    1983-01-01

    Some features of kinematic elements (KE) in two multicenter sunspot groups were studied using Tashkent full-disc white light heliograms. KE and morphological elements do not reveal any relationship. A KE coincides with a unipolar or multipolar spot or with part of a spot. It may also contain an extended stream including several spots. Relation of KE to large-scale photospheric magnetic fields is less clear. The line of polarity reversal is, in most cases, the deviding line between two adjacent KE. At the same time, a KE can contain spots of both polarities. Sunspot trajectories in the leading polarity regions show the best similarity. Interactions of KE are greatly influenced by the meridional drift. (author)

  4. Trace elements in cocoa solids and chocolate: an ICPMS study.

    Science.gov (United States)

    Yanus, Rinat Levi; Sela, Hagit; Borojovich, Eitan J C; Zakon, Yevgeni; Saphier, Magal; Nikolski, Andrey; Gutflais, Efi; Lorber, Avraham; Karpas, Zeev

    2014-02-01

    The concentrations of eight trace elements: lead (Pb), cadmium (Cd), chromium (Cr), manganese (Mn), cobalt (Co), arsenic (As), bismuth (Bi) and molybdenum (Mo), in chocolate, cocoa beans and products were studied by ICPMS. The study examined chocolate samples from different brands and countries with different concentrations of cocoa solids from each brand. The samples were digested and filtered to remove lipids and indium was used as an internal standard to correct matrix effects. A linear correlation was found between the level of several trace elements in chocolate and the cocoa solids content. Significant levels of Bi and As were found in the cocoa bean shells but not in the cocoa bean and chocolate. This may be attributed to environmental contamination. The presence of other elements was attributed to the manufacturing processes of cocoa and chocolate products. Children, who are big consumers of chocolates, may be at risk of exceeding the daily limit of lead; whereas one 10 g cube of dark chocolate may contain as much as 20% of the daily lead oral limit. Moreover chocolate may not be the only source of lead in their nutrition. For adults there is almost no risk of exceeding daily limits for trace metals ingestion because their digestive absorption of metals is very poor. © 2013 Published by Elsevier B.V.

  5. Molybdenite Mineral Evolution: A Study Of Trace Elements Through Time

    Science.gov (United States)

    McMillan, M. M.; Downs, R. T.; Stein, H. J.; Zimmerman, A.; Beitscher, B. A.; Sverjensky, D. A.; Papineau, D.; Armstrong, J. T.; Hazen, R. M.

    2010-12-01

    Mineral evolution explores changes through time in Earth’s near-surface mineralogy, including diversity of species, relative abundances of species, and compositional ranges of major, minor and trace elements. Such studies elucidate the co-evolution of the geosphere and biosphere. Accordingly, we investigated trace and minor elements in molybdenite (MoS2) with known ages from 3 billion years to recent. Molybdenite, the commonest mineral of Mo, may prove to be a useful case study as a consequence of its presence in Earth’s early history, the effects of oxidation on Mo mobility, and the possible role of Mo mineral coevolution with biology via its role in the nitrogen fixation enzyme nitrogenase. We employed ICPMS, SEM and electron microprobe analyses to detect trace and minor elements. We detected significant amounts of Mn and Cu (~100 ppm) and greater amounts of Fe, W, and Re (to ~4000 ppm). Molybdenites commonly contain micro inclusions, resulting in local concentrations in otherwise homogeneous samples. Inhomogeneities in Fe, Zn and Sn concentrations, for example, point to the presence of pyrite, sphalerite and cassiterite inclusions, respectively. Analyses examined as a function of time reveal that samples containing significant concentrations (>200 ppm, compared to average values < 100 ppm) of W and Re formed primarily within the last billion years. These trends may reflect changes in the mobility of W and Re in oxic hydrothermal fluids at shallow crustal conditions following the Great Oxidation Event.

  6. Study on trace elements in gangue in Huainan mining area

    Energy Technology Data Exchange (ETDEWEB)

    Cai, F.; Liu, Z.; Lin, B.; Li, W.; Lu, Z. [Anhui University of Science and Technology, Huainan (China)

    2008-08-15

    46 samples were gathered from coal seams and rocks of various lithological types. In these samples, trace elements were analyzed by inductively coupled plasma-mass spectrometry (IAP-MS)and instrumental neutron activation analysis (IAA). Hg was analyzed by cold-vapor atomic absorption spectrometry (KVASS), F by ion-selective electrode (IS) and major elements by chemical methods. Eleven trace elements (Cd, Cu, Ni, Sn, Hg, Mn, As, Cr, Pb, Zn, F) were selected for study, and five of them, Cd, Cu, Ni, Sn, Hg, were above the background soil level (B.L.) of Huainan City, China and world averages. Respectively: Cd is 40 and 7 times the B.L. of Huainan City and the world; Cu is about 2 and 1.5 times the B.L. of Huainan City and the world; Ni is 8 and 7 times the B.L. of Huainan City and the world; Sn is 3 and 2 times the B.L. of Huainan City and the world; and Hg is 3,602 and 1,381 times the B.L. of Huainan City and the world. Their hazards caused to the environment of the mining area are explored primarily. It is thought that their hazards may be cumulative. 15 refs., 1 fig., 3 tabs.

  7. Study of rare earth elements as material for control rods

    International Nuclear Information System (INIS)

    1975-03-01

    The properties of rare earth elements as the material for control rods were studied. The rare earth elements, especially europium oxide, has the nuclear property corresponding to boron carbide, and its neutron absorption process does not emit alpha particles. The elements produced as a result of neutron capture also have large capture cross sections. This paper presents survey report on the properties and nuclear properties of rare earth elements, and comparison with other materials. Preliminary experiment was performed to make the pellets of europium oxide, and is described in this paper. Because of large density, the crystal form to be made was monoclinic system. Europium hydroxide was decomposed at 1000 0 C and 10 -5 torr. The obtained powder was dipped into benzene, and dryed in the air at 450 0 C. This powder was pressed and sintered in the air for one hour at 1500 0 C. The density of the obtained pellets was 97.0% of the theoretical density. The cross section of europium for fast neutron absorption is not yet accurately obtained, and is in the range between 4.65 and 8.5 barn for 151 Eu(n,γ) reaction. Since chain absorption reaction is caused in Eu, the overall capability of neutron absorption is not much changed by the loss of original material due to absorption. The pellets of europium oxide may be handled in air, but must be kept in dry atmosphere. The reactions of europium oxide with various metals were also investigated. The characteristic behavior in case of irradiation depends on the amount of silicon contained, and it was very good if the amount was less than 0.03%. (Kato, T.)

  8. Study of element uptake in plants from the soil to assess environmental contamination by toxic elements

    CERN Document Server

    En, Z; Tsipin, V V; Tillaev, T; Jumaniyazova, G I

    2003-01-01

    Uptake of various elements by plants through the root system from the soil was studied. Vegetation experiments with cotton and white beet were carried out in the control and test fields. The test fields were enriched with phyto-bacterial strains capable of dissolving insoluble phosphate compounds. Analytical work involved analysis of blank, control and test soil samples and analysis of plants sampled in different growing periods: periods of first sprouts, florescence and ripening of the plants. Multielement analyses of soil and plant samples were carried out by instrumental neutron activation techniques using our WWR-SM research reactor. Results of the measurements have shown that macro- and microelement composition of the analyzed soil samples were consistent to clark contents except for copper. Our experiments have resulted that the concentration levels of copper in the soils were within 300-450 mg/kg, and its average concentration in cotton leaves was about similar to 35 mg/kg while in beet leaves it reach...

  9. Study on speciation of rare earth elements in soil

    International Nuclear Information System (INIS)

    Wang Yuqi; Sun Jingxin; Chen Hongmin; Guo Fanqing; Wang Lijun; Zhang Shen

    1996-01-01

    The contents of rare earth elements (REE) in red soil, yellow brown soil and leached chernozem are studied. After extracted sequentially, REE in these soils are fractionated into seven forms, i.e., (I) water soluble, (II) exchangeable, (III) loosely bound to organic mater, (IV) bound to carbonate and specifically absorbed, (V) bound to Fe-Mn oxides, (VI) tightly bound to organic matter and (VII) residual forms. The contents of REE in every form are determined by NAA (neutron activation analysis). The results show that REE in soils mainly exist in residual form and REE in soluble forms are very limited (<7%)

  10. Studies of flerovium and element 115 homologs with macrocyclic extractants

    Science.gov (United States)

    Despotopulos, John Dustin

    Study of the chemistry of the heaviest elements, Z ? 104, poses a unique challenge due to their low production cross-sections and short half-lives. Chemistry also must be studied on the one-atom-at-a-time scale, requiring automated, fast, and very efficient chemical schemes. Recent studies of the chemical behavior of copernicium (Cn, element 112) and flerovium (Fl, element 114) together with the discovery of isotopes of these elements with half-lives suitable for chemical studies have spurred a renewed interest in the development of rapid systems designed to study the chemical properties of elements with Z ≥ 114. This dissertation explores both extraction chromatography and solvent extraction as methods for development of a rapid chemical separation scheme for the homologs of flerovium (Pb, Sn, Hg) and element 115 (Bi, Sb), with the goal of developing a chemical scheme that, in the future, can be applied to on-line chemistry of both Fl and element 115. Macrocyclic extractants, specifically crown ethers and their derivatives, were chosen for these studies. Carrier-free radionuclides, used in these studies, of the homologs of Fl and element 115 were obtained by proton activation of high purity metal foils at the Lawrence Livermore National Laboratory (LLNL) Center for Accelerator Mass Spectrometry (CAMS): natIn(p,n)113Sn, natSn(p,n)124Sb, and Au(p,n)197m,gHg. The carrier-free activity was separated from the foils by novel separation schemes based on ion exchange and extraction chromatography techniques. Carrier-free Pb and Bi isotopes were obtained from development of a novel generator based on cation exchange chromatography using the 232U parent to generate 212Pb and 212Bi. Crown ethers show high selectivity for metal ions based on their size compared to the negatively charged cavity of the ether. Extraction by crown ethers occur based on electrostatic ion-dipole interactions between the negatively charged ring atoms (oxygen, sulfur, etc.) and the positively

  11. Chemical elements in invertebrate orders for environmental quality studies

    International Nuclear Information System (INIS)

    Magalhaes, Marcelo R.L.; Franca, Elvis J.; Paiva, Jose D.S.; Hazin, Clovis A.; Fonseca, Felipe Y.; Fernandes, Elisabete A. de Nadai; Bacchi, Marcio A.

    2013-01-01

    Among the biomonitors of environmental quality, there is a lack of studies on using invertebrates to evaluate quantitatively chemical elements in ecosystems. This group of animals is quite numerous, widely distributed and adaptable to the most diverse environmental conditions. These features are very useful for the environmental quality assessment, as well as the several occurring insect-plant interactions performing essential functions in ecosystems. The objective of this work is to study the variability of chemical composition of invertebrate orders for using in environmental quality monitoring studies. Instrumental neutron activation analysis - INAA was applied to determine some nutrients and trace elements in invertebrate samples. Sampling by pitfall traps was carried out in riverine ecosystems from the urban area from the Piracicaba Municipality, State of Sao Paulo, Brazil. Invertebrate and reference material samples were irradiated in the nuclear research reactor IEA-R1, Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN. Fragments of a Ni-Cr alloy were irradiated for monitoring the thermal neutron flux. Hymenoptera order was considered the most representative according to the total number of sampled species (about 60%). Significant amounts of Ba, Br, Fe and Sc were found in invertebrates of the order Opiliones. Potassium, rubidium and zinc were highly accumulated in species from Blattodea order, indicating a consistent pattern of accumulation for this invertebrate order. Taking into account the abundance of Hymenoptera order, the chemical composition of its species was significant different at the 95% confidence level for Br and Na in the sampled locals. (author)

  12. Chemical elements in invertebrate orders for environmental quality studies

    Energy Technology Data Exchange (ETDEWEB)

    Magalhaes, Marcelo R.L.; Franca, Elvis J.; Paiva, Jose D.S.; Hazin, Clovis A., E-mail: marcelo_rlm@hotmail.com, E-mail: ejfranca@cnen.gov.br, E-mail: dan-paiva@hotmail.com, E-mail: chazin@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Fonseca, Felipe Y.; Fernandes, Elisabete A. de Nadai; Bacchi, Marcio A., E-mail: felipe-yamada@hotmail.com, E-mail: lis@cena.usp.br, E-mail: mabacchi@cena.usp.br [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)

    2013-07-01

    Among the biomonitors of environmental quality, there is a lack of studies on using invertebrates to evaluate quantitatively chemical elements in ecosystems. This group of animals is quite numerous, widely distributed and adaptable to the most diverse environmental conditions. These features are very useful for the environmental quality assessment, as well as the several occurring insect-plant interactions performing essential functions in ecosystems. The objective of this work is to study the variability of chemical composition of invertebrate orders for using in environmental quality monitoring studies. Instrumental neutron activation analysis - INAA was applied to determine some nutrients and trace elements in invertebrate samples. Sampling by pitfall traps was carried out in riverine ecosystems from the urban area from the Piracicaba Municipality, State of Sao Paulo, Brazil. Invertebrate and reference material samples were irradiated in the nuclear research reactor IEA-R1, Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN. Fragments of a Ni-Cr alloy were irradiated for monitoring the thermal neutron flux. Hymenoptera order was considered the most representative according to the total number of sampled species (about 60%). Significant amounts of Ba, Br, Fe and Sc were found in invertebrates of the order Opiliones. Potassium, rubidium and zinc were highly accumulated in species from Blattodea order, indicating a consistent pattern of accumulation for this invertebrate order. Taking into account the abundance of Hymenoptera order, the chemical composition of its species was significant different at the 95% confidence level for Br and Na in the sampled locals. (author)

  13. A study on the nonlinear finite element analysis of reinforced concrete structures: shell finite element formulation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Jin; Seo, Jeong Moon

    2000-08-01

    The main goal of this research is to establish a methodology of finite element analysis of containment building predicting not only global behaviour but also local failure mode. In this report, we summerize some existing numerical analysis techniques to be improved for containment building. In other words, a complete description of the standard degenerated shell finite element formulation is provided for nonlinear stress analysis of nuclear containment structure. A shell finite element is derived using the degenerated solid concept which does not rely on a specific shell theory. Reissner-Mindlin assumptions are adopted to consider the transverse shear deformation effect. In order to minimize the sensitivity of the constitutive equation to structural types, microscopic material model is adopted. The four solution algorithms based on the standard Newton-Raphson method are discussed. Finally, two numerical examples are carried out to test the performance of the adopted shell medel.

  14. A study on the nonlinear finite element analysis of reinforced concrete structures: shell finite element formulation

    International Nuclear Information System (INIS)

    Lee, Sang Jin; Seo, Jeong Moon

    2000-08-01

    The main goal of this research is to establish a methodology of finite element analysis of containment building predicting not only global behaviour but also local failure mode. In this report, we summerize some existing numerical analysis techniques to be improved for containment building. In other words, a complete description of the standard degenerated shell finite element formulation is provided for nonlinear stress analysis of nuclear containment structure. A shell finite element is derived using the degenerated solid concept which does not rely on a specific shell theory. Reissner-Mindlin assumptions are adopted to consider the transverse shear deformation effect. In order to minimize the sensitivity of the constitutive equation to structural types, microscopic material model is adopted. The four solution algorithms based on the standard Newton-Raphson method are discussed. Finally, two numerical examples are carried out to test the performance of the adopted shell medel

  15. A study on the shielding element using Monte Carlo simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ki Jeong [Dept. of Radiology, Konkuk University Medical Center, Seoul (Korea, Republic of); Shim, Jae Goo [Dept. of Radiologic Technology, Daegu Health College, Daegu (Korea, Republic of)

    2017-06-15

    In this research, we simulated the elementary star shielding ability using Monte Carlo simulation to apply medical radiation shielding sheet which can replace existing lead. In the selection of elements, mainly elements and metal elements having a large atomic number, which are known to have high shielding performance, recently, various composite materials have improved shielding performance, so that weight reduction, processability, In consideration of activity etc., 21 elements were selected. The simulation tools were utilized Monte Carlo method. As a result of simulating the shielding performance by each element, it was estimated that the shielding ratio is the highest at 98.82% and 98.44% for tungsten and gold.

  16. Correlation study of chemical elements in phosphate ores

    International Nuclear Information System (INIS)

    Braganca, Maura Julia Camara da Silva

    1999-07-01

    Geological phenomena, 1) endogenous (volcanism, magmatic flow, metasomatism); 2) metamorphic (resultant of action of high temperature and pressure) and; 3) exogenous (intemperism, contamination) can modify the chemical composition of rocks soils. Thus, chemical elements with little mobility can be used as indicators of the previous geological situation before the occurrence of these phenomena and can sign the chemical composition of the initial formation. The elements with great mobility can already be used as indicators of the characteristic and intensity of the changes, can point out the influence factors and its space and time conditions. In this work the results of the study of phosphated samples ores coming from two alkaline-carbonatitic chimneys (Araxa and Catalao) and from a meta sedimentary rock (Patos de Minas), located phosphate rock deposit, are presented. The results were obtained using the instrumental neutron activation analysis, inductively coupled plasma-mass spectrometry (ICP-MS) and ICP-AES techniques. A comparison of the three types of samples ores, using chemical, crystallographic and statistical methods, shows that the Araxa and Catalao present some geochemical similarities and they are distinguished of Patos de Minas, despite its geographic proximity. (author)

  17. Biomonitoring of trace metal elements by lichens of the Western Pyrenees.Study of elemental and isotopic signature of mercury

    OpenAIRE

    Queipo Abad, Silvia

    2012-01-01

    The lichens, organisms originated by symbiotic relationship between an algae and a fungus, have shown good properties as biomonitors of pollution from Trace Metal Elements. They can be used as indicators of local and long-range atmospheric pollution. The assessment of deposition of atmospheric pollutants results difficult to know their long term impact. This happens specially when the study is focalized in remote areas. In this project it has been developed the elemental and isotopic analy...

  18. Geochemical study of main elements and trace elements in soils of three profiles in the state of Santa Catarina

    International Nuclear Information System (INIS)

    Santelli, R.E.

    1985-01-01

    The total concentrations of the main components (Si, Al, Fe, Ca, Mg, Mn, Ti, Na and K) and of nine trace elements (Ba, Co, Cu, La, Li, Mo, Ni, V and Zn are measured. The elements are determined by several atomic absorption and emission spectroscopic methods. Some properties such as granulometry, mineralogy of the clay fraction, organic matter, etc, are studied. (M.J.C.) [pt

  19. Studying apple bruise using a finite element method analysis

    Science.gov (United States)

    Pascoal-Faria, P.; Alves, N.

    2017-07-01

    Apple bruise damage from harvesting, handling, transporting and sorting is considered to be the major source of reduced fruit quality, resulting in a loss of profits for the entire fruit industry. Bruising is defined as damage and discoloration of fruit flesh, usually with no breach of the skin. The three factors which can physically cause fruit bruising are vibration, compression load and impact. The last one is the main source of bruise damage. Therefore, prediction of the level of damage, stress distribution and deformation of the fruits under external force has become a very important task. To address these problems a finite element analysis has been developed for studying Portuguese Royal Gala apple bruise. The results obtained will be suitable to apple distributors and sellers and will allow a reduction of the impact caused by bruise damage in apple annual production.

  20. Finite element thermal study of the Linac4 plasma generator

    International Nuclear Information System (INIS)

    Faircloth, D.; Kronberger, M.; Kuechler, D.; Lettry, J.; Scrivens, R.

    2010-01-01

    The temperature distribution and heat flow at equilibrium of the plasma generator of the rf-powered noncesiated Linac4 H - ion source have been studied with a finite element model. It is shown that the equilibrium temperatures obtained in the Linac4 nominal operation mode (100 kW rf power, 2 Hz repetition rate, and 0.4 ms pulse duration) are within material specifications except for the magnet cage, where a redesign may be necessary. To assess the upgrade of the Linac4 source for operation in the high-power operation mode of the Superconducting Proton Linac (SPL), an extrapolation of the heat load toward 100 kW rf power, 50 Hz repetition rate, and 0.4 ms pulse duration has been performed. The results indicate that a significant improvement of the source cooling is required to allow for operation in the high-power mode of SPL.

  1. Finite element thermal study of the Linac4 plasma generator

    Energy Technology Data Exchange (ETDEWEB)

    Faircloth, D. [STFC, Rutherford Appleton Laboratory, Chilton, Oxon OX11 0QX (United Kingdom); Kronberger, M.; Kuechler, D.; Lettry, J.; Scrivens, R. [BE-ABP, Hadron Sources and Linacs, CERN, CH-1211 Geneva (Switzerland)

    2010-02-15

    The temperature distribution and heat flow at equilibrium of the plasma generator of the rf-powered noncesiated Linac4 H{sup -} ion source have been studied with a finite element model. It is shown that the equilibrium temperatures obtained in the Linac4 nominal operation mode (100 kW rf power, 2 Hz repetition rate, and 0.4 ms pulse duration) are within material specifications except for the magnet cage, where a redesign may be necessary. To assess the upgrade of the Linac4 source for operation in the high-power operation mode of the Superconducting Proton Linac (SPL), an extrapolation of the heat load toward 100 kW rf power, 50 Hz repetition rate, and 0.4 ms pulse duration has been performed. The results indicate that a significant improvement of the source cooling is required to allow for operation in the high-power mode of SPL.

  2. Finite Element Thermal Study of the Linac4 Plasma Generatora

    CERN Document Server

    Faircloth, D; Kuchler, D; Lettry, L; Scrivens, R; CERN. Geneva. BE Department

    2010-01-01

    The temperature distribution and heat flow at equilibrium of the plasma generator of the RF-powered non-cesiated Linac4 H- ion source have been studied with a finite element model. It is shown that the equilibrium temperatures obtained in the Linac4 nominal operation mode (100 kW RF power, 2 Hz, 0.4 ms pulse duration) are within material specifications except for the magnet cage, where a redesign may be necessary. To assess the upgrade of the Linac4 source for operation in the high-power operation mode of SPL, an extrapolation of the heat load towards 100 kW RF power, 50 Hz repetition rate and 0.4 ms pulse duration has been performed. The results indicate that a significant improvement of the source cooling is required to allow for operation in HP-SPL.

  3. On-line gas chromatographic studies of rutherfordium (Element 104), hahnium (Element 105), and homologs

    International Nuclear Information System (INIS)

    Kadkhodayan, B.

    1993-05-01

    Gas-phase isothermal chromatogaphy is a method by which volatile compounds of different chemical elements can be separated according to their volatilities. The technique, coupled with theoretical modeling of the processes occurring in the chromatogaphy column, provides accurate determination of thermodynamic properties (e.g., adsorption enthalpies) for compounds of elements, such as the transactinides, which can only be produced on an atom-at-a-time basis. In addition, the chemical selectivity of the isothermal chromatogaphy technique provides the decontamination from interfering activities necessary for the determination of the nuclear decay properties of isotopes of the transactinide elements. Volatility measurements were performed on chloride species of Rf and its group 4 homologs, Zr and Hf, as well as Ha and its group 5 homologs, Nb and Ta. Adsorption enthalpies were calculated for all species using a Monte Carlo code simulation based on a microscopic model for gas thermochromatography in open columns with laminar flow of the carrier gas. Preliminary results are presented for Zr- and Nb-bromides

  4. Statistical study on the strength of structural materials and elements

    International Nuclear Information System (INIS)

    Blume, J.A.; Dalal, J.S.; Honda, K.K.

    1975-07-01

    Strength data for structural materials and elements including concrete, reinforcing steel, structural steel, plywood elements, reinforced concrete beams, reinforced concrete columns, brick masonry elements, and concrete masonry walls were statistically analyzed. Sample statistics were computed for these data, and distribution parameters were derived for normal, lognormal, and Weibull distributions. Goodness-of-fit tests were performed on these distributions. Most data, except those for masonry elements, displayed fairly small dispersion. Dispersion in data for structural materials was generally found to be smaller than for structural elements. Lognormal and Weibull distributions displayed better overall fits to data than normal distribution, although either Weibull or lognormal distribution can be used to represent the data analyzed. (auth)

  5. Study of trace elements in milk by nuclear analytical techniques

    International Nuclear Information System (INIS)

    Gharib, A.; Rahimi, H.; Pyrovan, H.; Raoffi, N.J.; Taherpoor, H.

    1985-01-01

    This work is part of project with the IAEA in a coordinated program on 'Trace Elements in Human and Bio-environmental Systems' to evaluate their nutritional requierements, interrelations and the role of trace elements in health, metabolism, etc. Cow's milk is regarded to be one of the most important and most nutritious foodstuffs of mankind. Hence, as a first step, an elemental analysis for milk was carried out: a few samples of pasteurized milk and local samples were investigated for essential and toxic trace elements. The secondary aim of the project was the assessment of various analytical techniques involved. AAS, PIXE and NAA are presented here. The latter was applied both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement, there is, however, some justification to clarify this internal inconsistency. PIXE analysis is very fast and rather routine, but the technique for trace element analysis needs certain adaptations and improvement. (author)

  6. Elements of Motivational Structure for Studying Mechanical Engineering

    Directory of Open Access Journals (Sweden)

    Nikša Dubreta

    2017-12-01

    Full Text Available The article presents the findings on students' reasons for studying mechanical engineering. These reasons were covered in terms of extrinsic and intrinsic motivation additionally related to selected independent variables of the sample – students' secondary school Grade Point Average, their gender and the socio-economic status. The research was conducted with the first year students of the Faculty of Mechanical Engineering at the University of Zagreb, Croatia. The sample consisted of 282 students (228 males and 54 females and comprised students of all majors. According to descriptive character of the questionnaire type survey characteristics of the sample are presented. Composite variables of extrinsic and intrinsic motivation were dichotomized to present different levels of the students' overall motivational structure. Results indicate a students' interest in the field of science and technology as the most important element of intrinsic motivation, with no significant relation to any of independent variables. By contrast, extrinsic motivation has manifested as significantly related to the variables of Grade Point Average and to parents' education as one component of the socio-economic status. However, a significant level of indecisive respondents regarding the both intrinsic and extrinsic motivation suggests that the choice of the study programme is not always a consistent and an unambiguous process.

  7. XRF Studies of Trace Elements and Essential hypertension

    International Nuclear Information System (INIS)

    Chaudhri, M.A.; Paul, U.; Chaudhri, M.N.

    2011-01-01

    The elemental concentrations in the blood of fully mature spontaneously hypertensive rats [SHR] were compared with that of normotensive Wistar Kyoto rats [WKy] with an energy- dispersive XRF-system using a Rhodium X-ray tube. A number of elements, Na, Mg, P, Cl, S, K, Ca, Fe, Cu, Zn, Rb and Br, ranging in concentrations from a few ppm to around 1 % were measured in all the blood samples. It has been observed that the concentrations of elements Na, Cu, Zn and Br in whole blood of SHR are about 5%, 17%, 7% and 21% higher respectively than in the WKy- group

  8. Finite element model to study calcium distribution in oocytes ...

    African Journals Online (AJOL)

    Parvaiz Ahmad Naik

    2015-03-20

    Mar 20, 2015 ... Department of Mathematics, Maulana Azad National Institute of Technology, Bhopal 462051 ... finite element method has been employed to obtain the solution. ..... Nelson MT, Cheng H, Rubart M. Relaxation of arterial smooth.

  9. Nuclear analytical methods for trace element studies in calcified tissues

    International Nuclear Information System (INIS)

    Chaudhry, M.A.; Chaudhry, M.N.

    2001-01-01

    Full text: Various nuclear analytical methods have been developed and applied to determine the elemental composition of calcified tissues (teeth and bones). Fluorine was determined by prompt gamma activation analysis through the 19 F(p,ag) 16 O reaction. Carbon was measured by activation analysis with He-3 ions, and the technique of Proton-Induced X-ray Emission (PIXE) was applied to simultaneously determine Ca, P, and trace elements in well-documented teeth. Dental hard tissues, enamel, dentine, cement, and their junctions, as well as different parts of the same tissue, were examined separately. Furthermore, using a Proton Microprobe, we measured the surface distribution of F and other elements on and around carious lesions on the enamel. The depth profiles of F, and other elements, were also measured right up to the amelodentin junction

  10. Study of plutonium and its alloys with III B elements

    International Nuclear Information System (INIS)

    Robert, Gregory

    2003-12-01

    The objective of this research thesis is to understand phenomena which intervene in the delta phase stabilisation of plutonium alloys, and to build phase diagrams for PuAl, PuGa, and PuIn. After a presentation of some properties of plutonium and of its compounds, the author presents the adopted approach: the 'ab initio' approach to the fundamental state based on the density functional theory (DFT). Then, a numerical method used within the framework of the DFT is developed, and results obtained by using the developed code are presented for the different studied materials (Al, Ga, In, Pu). A gradient correction is applied to the alloys by using the Generalised Gradient Approximation (GGA) with spin polarisation. It allows the determination of the formation energy of compounds. Hybridisation effects between plutonium and delta-generating elements (Al, Ga, In) are assessed. A statistic approach (cluster variation method, CVM) is used to assess the influence of the chemical order at short distance on the stability of the fcc solid solution, and to obtain theoretical binary alloy diagrams

  11. Nuclear structure studies towards superheavy elements and perspectives with AGATA

    International Nuclear Information System (INIS)

    Korichi, A.

    2005-01-01

    A variety of theoretical approaches have been used to calculate the shell closure of spherical Super Heavy Elements (SHE) but the predictions of the location of the 'island of stability' vary from Z=114 to 120 and 126, with neutron numbers around N=172 or N=184 depending on the model employed. A deformed minimum around Z=108 and N=162 is predicted and an increase of the half-life of Hassium (Z=108) is experimentally observed when approaching the neutron number N=162. Super heavy nuclei are produced with very low cross-section (a few picobarns) and this makes their spectroscopic study impossible with today's beam intensities and detectors. However, important information can be obtained from the structure of mid-shell deformed nuclei (Z∼104) where selected single particle orbitals, which lie close to the spherical shell gap in SHE, are close to the Fermi level. The information will come from decay and in-beam spectroscopy. A promising area of progress, using the state-of-the art instruments, is represented by the observation of rotational gamma-ray transitions in No and Fm isotopes showing the deformed character of these nuclei. One of the objectives and focus of the nuclear structure community is related to the investigation of Single particle excitations beyond the N=152 neutron gap and collective properties of heavier systems towards Z∼104. The IN2P3-JINR collaboration has launched a project of electron and gamma-ray spectroscopy studies of heavy nuclei at the FLNR. This project benefits from the radioactive actinide targets uniquely available at Dubna and from the very intense stable beams provided by the U400 cyclotron. This offers a unique opportunity for the study of nuclei above Z=100 along an isotopic chain approaching N=162. In this contribution, the emphasis will be on the GABRIELA project and its issues. I will finally point out the perspectives with the new generation of gamma detectors such as AGATA

  12. Study of trace elements in milk by nuclear analytical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Gharib, A.; Rahimi, H.; Peyrovan, H.; Raofei, H.N.J.; Taherpour, H. (Atomic Energy Organization of Iran, Teheran. Nuclear Research Centre)

    This work is part of a project with the IAEA, in a coordinated programme on ''trace elements in Human Nutrition and Bio-Environmental Systems'' to evaluate their nutritional requirements, interrelations and the role of trace elements in health, metabolism etc. Cow's milk is regarded as one of the most important and nutritious foodstuffs consumed by people. Hence, as a first step, an elemental analysis for milk was carried out for this purpose so a few samples of pasteurized milk and local samples were investigated for essential and toxic trace elements. The secondary aim of this project was the assessment of various analytical techniques involved. However, in the present work, the methods involved were AAS, PIXE and NAA. The latter method applied, both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement, there is however, some justification to clarify this internal inconsistency. The precision for NAA and AAS allows greater degree of acceptance respectively. Although PIXE is very fast and rather routine, the technique of trace element analysis needs certain adaptations and developments.

  13. Elemental Study in Soybean and Products by Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Vorapot, Permnamtip; Arporn Busamongkol; Sirinart, Laoharojanaphand

    2009-07-01

    Full text: Elements were analyzed in soybean and products by Instrumental Neutron Activation Analysis (INAA), Pseudo-Cyclic Instrumental Neutron Activation Analysis (PCINAA) and Epithermal Instrumental Neutron Activation Analysis (EINAA). Elements detected in sample were include Al, Br, Ca, Cl, Cu, Fe, I, K, Mg, Mn Na, Se and Zn. The result showed that the nutritional contents changed after food processing. From experiments (n = 2), it was found that after food processing, the concentration of Cl and Na in soy bean curd increased from 0.0045 and 0.0011% to found 0.91 and 0.39 %, respectively. Other elements did not differ from soybean. Limits of detection for Al, Br, Ca, Cl, Cu, Fe, I, K, Mg, Mn Na, Se and Zn were 0.05, 0.2, 50, 6, 10, 15, 0.05, 30, 40, 5, 5, 0.05 and 1 mg.kg - 1, respectively

  14. A computational study of nodal-based tetrahedral element behavior.

    Energy Technology Data Exchange (ETDEWEB)

    Gullerud, Arne S.

    2010-09-01

    This report explores the behavior of nodal-based tetrahedral elements on six sample problems, and compares their solution to that of a corresponding hexahedral mesh. The problems demonstrate that while certain aspects of the solution field for the nodal-based tetrahedrons provide good quality results, the pressure field tends to be of poor quality. Results appear to be strongly affected by the connectivity of the tetrahedral elements. Simulations that rely on the pressure field, such as those which use material models that are dependent on the pressure (e.g. equation-of-state models), can generate erroneous results. Remeshing can also be strongly affected by these issues. The nodal-based test elements as they currently stand need to be used with caution to ensure that their numerical deficiencies do not adversely affect critical values of interest.

  15. Study and Analysis of Fictional Elements of Fraed o Soluk

    Directory of Open Access Journals (Sweden)

    Ali Reza Nabilu

    2010-10-01

    Full Text Available This article reviews and analyzes fictional elements of Fraed o Soluk.We research these titles: tale and story, genre, size, language, dialogue, character, narrator and speakers, view angle, action and structure of stories, moral results,time and place in Fraed o Soluk.This study explains the structure of stories from different dimensions. Fraed o Soluk includes the moral stories and its prose was written according to the method of Kalile va Demneh and Sandbadname.In stories and tales of Fraed of Soluk, there are features such as emphasis on the events, the absence of a strong cause and effect relationships between events, absolutism, moral results, immutability of characters, quality of narrative, common themes, and hypothetical time and place.There are 58 stories in Fraed o Soluk. The main stories are longer than secondary stories. Dialogue occurs mostly between main characters of stories. Linguistic features of technical prose (sixth and seventh century in this book can be seen. There are 289 characters in the stories of this book. 85 percent are public and 15 percent are special. Most characters are animals (29 percent, men and boys (19/5 percent and job holders (14 percent. Main narrators include: book’s author, Behrooz, businessman son and Ghasir.The main narrators of the stories are often unknown.From a total of 58 stories, 45 percent have action and 55 percent have no specific action.95 percent of stories have moral results and recommendations.38 percent of the stories have time.70 percent of the stories have place.

  16. Design element analysis on juice market Case study: Prigat

    Directory of Open Access Journals (Sweden)

    Nicoleta Andreea NEACŞU

    2015-06-01

    Full Text Available : If at the beginning package was considered simply a package that contained a product, now due to the development and modernization of the trade, it is a very valuable component of the marketing policy, being a carrier of messages to the consumer. Classic design elements that are included in any packaging refer to shape, color and graphics. The Romanian Juices Market was marked by originality and innovation in terms of packaging design elements. Thus, from 1998 until now the following have appeared: the first wide mouth square bottle, the first sport opening head PET bottle for Prigat Active, the first opening gable top box produced in our country.

  17. Experimental study of some mounting brackets to support fuel elements

    International Nuclear Information System (INIS)

    Aubert, M.; Poglia, S.; Roche, R.

    1958-09-01

    In an atomic pile with vertical channels, fuel elements are stacked on one another. According to a possible assembly, fuel element can be contained by a graphite sleeve and be supported by a mounting bracket in this sleeve. Sleeves are then stacked on one another. The authors report the investigation of different designs for these mounting brackets. They describe their mechanical role and their mechanical, aerodynamic, neutronic and test conditions. They report tests performed on brackets made in graphite and on brackets made in stainless steel and graphite, and discuss the obtained results

  18. Experimental study on effect of flux composition on element transfer ...

    Indian Academy of Sciences (India)

    BRIJPAL SINGH

    2018-03-10

    Mar 10, 2018 ... 3 Division of Manufacturing Processes and Automation Engineering, Netaji Subhas Institute of ... Submerged arc welding; basicity index; element transfer; slag metal reactions; oxidizing power of ... flux composition, wire and base plate composition. ..... increase in BI of the flux with increasing NiO additive. If.

  19. The Elements and Principles of Design: A Baseline Study

    Science.gov (United States)

    Adams, Erin

    2013-01-01

    Critical to the discipline, both professionally and academically, are the fundamentals of interior design. These fundamentals include the elements and principles of interior design: the commonly accepted tools and vocabulary used to create and communicate successful interior environments. Research indicates a lack of consistency in both the…

  20. Experimental study of water flow in nuclear fuel elements

    International Nuclear Information System (INIS)

    Rodrigues, Lorena Escriche; Rezende, Hugo Cesar; Mattos, Joao Roberto Loureiro de; Barros Filho, Jose Afonso; Santos, Andre Augusto Campagnole dos

    2013-01-01

    This work aims to develop an experimental methodology for investigating the water flow through rod bundles after spacer grids of nuclear fuel elements of PWR type reactors. Speed profiles, with the device LDV (Laser Doppler Velocimetry), and the pressure drop between two sockets located before and after the spacer grid, using pressure transducers were measured

  1. A study of the deflections of metal road guardrail elements

    Directory of Open Access Journals (Sweden)

    O. Prentkovskis

    2009-09-01

    Full Text Available Statistical data on traffic accidents in 2008 in Lithuania is presented. Referring to statistical data, ‘grounding on an obstacle’ makes one-tenth of all registered traffic accidents – 9.4% (an obstacle may be a road guardrail, a lamp post, a tree, a bar, a gate, etc.. Road guardrails of various types are installed on the shoulders and dividing strips of urban and suburban roads. They are as follows: reinforced concrete guardrails, cable guardrails and metal guardrails. Metal guardrails, consisting of Σ-shape metal posts and a protective W-shape horizontal beam, are most popular. The authors of the present paper examine the deformation processes of the elements of the above mentioned guardrail. A mathematical model of metal road guardrail was developed. Metal road guardrail was modelled using one-dimensional first-order finite elements, taking into account only elastic deformations, as well as the effect of soil on the buried post section of the guardrail. Based on the developed mathematical model of metal road guardrail, the deflections of its elements caused by the impact of a vehicle moving at varying speed were determined. The obtained values of deflections of guardrail elements (a protective W-shape horizontal beam and a Σ-shape post presented in paper do not exceed the admissible values (of beam deflections.

  2. Elemental and structural studies at the bone-cartilage interface

    Energy Technology Data Exchange (ETDEWEB)

    Kaabar, W., E-mail: w.kaabar@surrey.ac.uk [Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom); Daar, E. [Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom); Bunk, O. [Swiss Light Source, Paul Scherrer Institute, 5232 Villigen (Switzerland); Farquharson, M.J. [Department of Medical Physics and Applied Radiation Sciences, McMaster University, 1280 Main Street West, Hamilton, Ontario, L8S 4K1 (Canada); Laklouk, A. [Al-Fateh University, Tripoli (Libya); Bailey, M.; Jeynes, C. [Surrey Ion Beam Centre, University of Surrey, Guildford GU2 7XH (United Kingdom); Gundogdu, O. [Umuttepe Campus, University of Kocaeli, 41380 Kocaeli (Turkey); Bradley, D.A. [Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom)

    2011-10-01

    Micro-Proton Induced X-ray Emission ({mu}-PIXE) and Proton Induced Gamma-ray Emission (PIGE) techniques were employed in the investigation of trace and essential elements distribution in normal and diseased human femoral head sections affected by osteoarthritis (OA). PIGE was exploited in the determination of elements of low atomic number z<15 such as Na and F whereas elements with z>15 viz Ca, Z, P and S were determined by PIXE. Accumulations of key elements in the bone and cartilage sections were observed, significant S and Na concentrations being found in the cartilage region particularly in normal tissues. Zn showed enhanced concentrations at the bone-cartilage interface. At a synchrotron facility, small angle X-ray scattering (SAXS) was utilized on a decalcified human femoral head section affected by OA, direct measurements being made of spatial alterations of collagen fibres. The SAXS results showed a slight decrease in the axial periodicity between normal collagen type I and that in diseased tissue in various sites, in contrast with the findings of others.

  3. Study of Finite Element Number Influence over the Obtained Results in Finite Element Analyses of a Mechanical Structure

    Directory of Open Access Journals (Sweden)

    Ana-Maria Budai

    2013-05-01

    Full Text Available This paper present the results of a study that was made to establish the influence of finite element number used to determined the real load of a structure. Actually, the study represent a linear static analyze for a link gear control mechanism of a Kaplan turbine. The all analyze was made for the normal condition of functioning having like final scope to determine de life time duration of mentioned mechanism.

  4. Neutron activation studies of trace elements in tree rings

    International Nuclear Information System (INIS)

    Tout, R.E.; Gilboy, W.B.; Spyrou, N.M.

    1977-01-01

    The levels of twelve elements most of which are either considered essential to plant growth or have been detected in air filter samples in an air pollution survey have been monitored in three transverse sections of trees, two elms (ring-porous trees) and one cedar (a conifer). An irradiation time of 10 minutes and a waiting time of 1 minute were selected followed by a 10-minute count. The activated samples were placed on a specially shaped perspex disc situated on a 45-cm 3 Ge(Li) detector. The gamma-ray spectra were subsequently analysed on a 6600 computer, using the library program 'SAMPO' to which subroutines have been added for peak identification and for calculating the mass of elements present. All irradiations were carried out using a thermal neutron flux of 1.5x10 12 ncm -2 sec -1 . Two dimensional distributions of the elements around the tree rings of the section and radially from ring to ring, have been obtained to see if tree rings can be analysed for use as a record of historical pollution. Definite movement of most of these elements between the two main parts of the xylem has occured in all three trees. This makes it seem unlikely that any pollution products taken up from the atmosphere would be retained in the same ring in which they were originally accumulated. Exceptions may occur in the sapwood rings, where a few elements, especially Cl, show directional peaks which do not persist in the heartwood. (T.G.)

  5. PHARMACOPOEIA METHODS FOR ELEMENTAL ANALYSIS OF MEDICINES: A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Tetiana M. Derkach

    2018-01-01

    Full Text Available The article is devoted to the problem of quality assurance of medicinal products, namely the determination of elemental impurity concentration compared to permitted daily exposures for and the correct choice analytical methods that are adequate to the formulated tasks. The paper goal is to compare characteristics of four analytical methods recommended by the Pharmacopoeia of various countries to control the content of elemental impurities in medicines, including medicinal plant raw materials and herbal medicines. Both advantages and disadvantages were described for atomic absorption spectroscopy with various atomising techniques, as well as atomic emission spectroscopy and mass spectrometry with inductively coupled plasma. The choice of the most rational analysis method depends on a research task and is reasoned from the viewpoint of analytical objectives, possible complications, performance attributes, and economic considerations. The methods of ICP-MS and GFAAS were shown to provide the greatest potential for determining the low and ultra-low concentrations of chemical elements in medicinal plants and herbal medicinal products. The other two methods, FAAS and ICP-AES, are limited to the analysis of the main essential elements and the largest impurities. The ICP-MS is the most efficient method for determining ultra-low concentrations. However, the interference of mass peaks is typical for ICP-MS. It is formed not only by impurities but also by polyatomic ions with the participation of argon, as well as atoms of gases from the air (C, N and O or matrices (O, N, H, P, S and Cl. Therefore, a correct sample preparation, which guarantees minimisation of impurity contamination and loss of analytes becomes the most crucial stage of analytical applications of ICP-MS. The detections limits for some chemical elements, which content is regulated in modern Pharmacopoeia, were estimated for each method and analysis conditions of medicinal plant raw

  6. A STUDY ON THE HIERARCHY OF MANAGEMENT ELEMENTS

    Science.gov (United States)

    Suzuki, Nobuyuki; Watanabe, Tadashi

    Compared to the late 20th century, the Japanese construction industry has drastically changed its business methodology, outlook and approach in response to global issues and the incredible advances in technology. Such influences, non-exhaustively include the; WTO Government procurement agreement, updating conditions of tendering and contracting, client demands for cost reduction and the rapid penetration of ICT (Information and Communication Technology) into modern society. These days, the significance of controlling Quality, Cost and Time (the so-called QCT) has been recognized as an eternal-triangle by almost all countries, Government organizations and the private sector. However, as the construction industry is exposed to , and influenced by, more and more internal and external dynamic factors, continued reliance on managing and controlling QCT elements on their own is no longer adequate in meeting the growing demands and expectations, and as such control of additional management elements is now essential to avoid problems, or minimize their potential impacts should they occur. This paper utilizes the results of a survey carried out amongst construction managers and consultants in Japan and overseas to develop a spatial network that defines the interaction of management factors as a weighted graphical model. The calculated closeness centrality index of the developed management network model is adopted to identify the initialelement hierarchy, which is then further analyzed using the minimum distance of independent relationships of management elements (Warshall-Floyd algorism methodology), to identify the optimum potential hierarchy for effective construction management. A key result of the analysis is the significance of "Human Resource" in the construction industry management element hierarchy alongside the traditional QCT elements.

  7. Study on Tourist Carrying Capacity Based on Matter Element Analysis

    Institute of Scientific and Technical Information of China (English)

    LiuYunguo; FanTing; LiXin; ZhouMing; WangXianhai

    2005-01-01

    This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method called matter element analysis can solve the uncertain and incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination's carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

  8. Radiotracer studies on radionuclide and trace element cycling in corals

    International Nuclear Information System (INIS)

    Fowler, S.W.; Teyssie, J.L.; Acosta, A.; Gattuso, J.P.; Jaubert, J.

    1999-01-01

    Microcosm experiments were designed in which microcolonies of three coral species were exposed to gamma-emitting radiotracers of trace metals and radionuclides ( 110 Am, 109 Cd. 57 Cocyanocobalamin, 110 Ag, 134 Cs, 65 Zn, 60 Co, 75 Se, 85 Sr, 133 Ba, 54 Mn) to determine uptake and loss as well as distribution in tissue, skeleton and zooxanthellae. Following a seven day exposure in seawater, the degree of uptake (CF = concentration factor) for a given element was highly dependent on species. The highest CF s , in whole colonies were found for 100m Ag(82-172), 57 Co (68-124) and 65 Zn (41-52); the lowest CF s , were noted for the soluble radionuclides Cs (1-2) and Sr (2-9). Low CF s , were recorded in skeleton and increased by roughly an order of magnitude between skeleton, tissue and zooxanthellae. 241 Am is readily taken up by dead skeleton (CF=31-49), whereas in living corals it is preferentially accumulated by the tissue (CF=51-120) which acts as a partial barrier against contamination of the internal skeleton (CF=6-10). The chemical species of the element can also affect uptake by corals, as evidenced by the order of magnitude greater bioaccumulation of organic cobalt compared to the inorganic form in tissues. Once accumulated, some of the elements tested (e.g. Cd, Co) are strongly retained with biological half-lives as long as several months

  9. Commissioning a Rotating Target Wheel Assembly for Heavy Element Studies

    Science.gov (United States)

    Fields, L. D.; Bennett, M. E.; Mayorov, D. A.; Folden, C. M.

    2013-10-01

    The heaviest elements are produced artificially by fusing nuclei of light elements within an accelerator to form heavier nuclei. The most direct method to increase the production rate of nuclei is to increase the beam intensity, necessitating the use of a rotating target to minimize damage to the target by deposited heat. Such a target wheel was constructed for heavy element research at Texas A&M University, Cyclotron Institute, consisting of a wheel with three banana-shaped target cutouts. The target is designed to rotate at 1700 rpm, and a fiber optic cable provides a signal to trigger beam pulsing in order to avoid irradiating the spokes between target segments. Following minor mechanical modifications and construction of a dedicated electrical panel, the rotating target assembly was commissioned for a beam experiment. A 15 MeV/u beam of 20Ne was delivered from the K500 cyclotron and detected by a ruggedized silicon detector. The beam pulsing response time was characterized as a function of the rational frequency of the target wheel. Preliminary analysis suggests that the K500 is capable of pulsing at rates of up to 250 Hz, which is sufficient for planned future experiments. Funded by DOE and NSF-REU Program.

  10. Elemental and structural studies at the bone-cartilage interface

    International Nuclear Information System (INIS)

    Kaabar, W.; Daar, E.; Bunk, O.; Farquharson, M.J.; Laklouk, A.; Bailey, M.; Jeynes, C.; Gundogdu, O.; Bradley, D.A.

    2011-01-01

    Micro-Proton Induced X-ray Emission (μ-PIXE) and Proton Induced Gamma-ray Emission (PIGE) techniques were employed in the investigation of trace and essential elements distribution in normal and diseased human femoral head sections affected by osteoarthritis (OA). PIGE was exploited in the determination of elements of low atomic number z 15 viz Ca, Z, P and S were determined by PIXE. Accumulations of key elements in the bone and cartilage sections were observed, significant S and Na concentrations being found in the cartilage region particularly in normal tissues. Zn showed enhanced concentrations at the bone-cartilage interface. At a synchrotron facility, small angle X-ray scattering (SAXS) was utilized on a decalcified human femoral head section affected by OA, direct measurements being made of spatial alterations of collagen fibres. The SAXS results showed a slight decrease in the axial periodicity between normal collagen type I and that in diseased tissue in various sites, in contrast with the findings of others.

  11. Similitude and scaling of large structural elements: Case study

    Directory of Open Access Journals (Sweden)

    M. Shehadeh

    2015-06-01

    Full Text Available Scaled down models are widely used for experimental investigations of large structures due to the limitation in the capacities of testing facilities along with the expenses of the experimentation. The modeling accuracy depends upon the model material properties, fabrication accuracy and loading techniques. In the present work the Buckingham π theorem is used to develop the relations (i.e. geometry, loading and properties between the model and a large structural element as that is present in the huge existing petroleum oil drilling rigs. The model is to be designed, loaded and treated according to a set of similitude requirements that relate the model to the large structural element. Three independent scale factors which represent three fundamental dimensions, namely mass, length and time need to be selected for designing the scaled down model. Numerical prediction of the stress distribution within the model and its elastic deformation under steady loading is to be made. The results are compared with those obtained from the full scale structure numerical computations. The effect of scaled down model size and material on the accuracy of the modeling technique is thoroughly examined.

  12. Study on boiling heat transfer from diode elements in an integrated circuit chip

    Energy Technology Data Exchange (ETDEWEB)

    Hijikata, Kunio; Nagasaki, Takao; Kurata, Naoki (Tokyo Institute of Technology Faculty of Engineering (Japan))

    1989-02-25

    By temperature measurement of elements in boiling experiments with diodes in an integrated circuit (IC) chip, characteristics of boiling heat transfer from tiny heat generating elements in an IC chip and thermal transfer characteristics of multiple heating elements adjoining positioned were studied. The Package of an IC was removed by acid to expose the IC chip. Electricity is applied to the diode in the IC to study the heat transfer properties. The heat transfer rate from a tiny heating element on an IC is greater than that from the conventional continual heated surface. In the case of heat generation by two adjoining elements, the relationship between the total amount of heat and the temperature of elements shows the same characteristics as in the case with a single element. The boiling heat transfer properties of an element in an IC chip are influenced by such microstructure surrounding the element as the pattern of wiring. Heat transfer increases with the decreasing size of the heating element by the heat transfer to the substrate beneath the element. 10 refs., 15 figs.

  13. Finite element structural study of the VGOT wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Otero, A.D. [University of Buenos Aires (Argentina). College of Engineering; Ponta, F.L. [University of Illinois, Urbana, IL (United States). Dept. of Theoretical and Applied Mechanics

    2004-07-01

    We analyse the implementation of the finite element method to simulate the structural behaviour of the blade-wagons of variable-geometry oval-trajectory (VGOT) Darrieus wind turbines. The key feature of a VGOT machine is that each blade, instead of rotating around a central vertical axis, slides over rails mounted on a wagon formed by a tubular reticulated structure supported by standard train bogies. The structure should be designed to absorb the efforts in the vertical and traverse directions of the railroad due to the aerodynamic loads, the weight of the components and the centrifugal acceleration along the curved tracks. We show some results for the tip deflection and the tip torsion of the blade, the frontal and lateral angle variations in the blade bottom and the Von Misses tensions of five sample beams, all of them in function of the trajectory-length parameter; and some examples of the deformed configuration of the reticulated structure. (author)

  14. Rare Earth Element Partitioning in Lunar Minerals: An Experimental Study

    Science.gov (United States)

    McIntosh, E. C.; Rapp, J. F.; Draper, D. S.

    2016-01-01

    The partitioning behavior of rare earth elements (REE) between minerals and melts is widely used to interpret the petrogenesis and geologic context of terrestrial and extra-terrestrial samples. REE are important tools for modelling the evolution of the lunar interior. The ubiquitous negative Eu anomaly in lunar basalts is one of the main lines of evidence to support the lunar magma ocean (LMO) hypothesis, by which the plagioclase-rich lunar highlands were formed as a flotation crust during differentiation of a global-scale magma ocean. The separation of plagioclase from the mafic cumulates is thought to be the source of the Eu depletion, as Eu is very compatible in plagioclase. Lunar basalts and volcanic glasses are commonly depleted in light REEs (LREE), and more enriched in heavy REEs (HREE). However, there is very little experimental data available on REE partitioning between lunar minerals and melts. In order to interpret the source of these distinctive REE patterns, and to model lunar petrogenetic processes, REE partition coefficients (D) between lunar minerals and melts are needed at conditions relevant to lunar processes. New data on D(sub REE) for plagioclase, and pyroxenes are now available, but there is limited available data for olivine/melt D(sub REE), particularly at pressures higher than 1 bar, and in Fe-rich and reduced compositions - all conditions relevant to the lunar mantle. Based on terrestrial data, REE are highly incompatible in olivine (i.e. D much less than 1), however olivine is the predominant mineral in the lunar interior, so it is important to understand whether it is capable of storing even small amounts of REE, and how the REEs might be fractionatied, in order to understand the trace element budget of the lunar interior. This abstract presents results from high-pressure and temperature experiments investigating REE partitioning between olivine and melt in a composition relevant to lunar magmatism.

  15. A study of trace elements in some medicinal plants

    International Nuclear Information System (INIS)

    Islam, A.; Biswas, S.K.; Akhter, S.

    1995-05-01

    Twenty one medicinal plants (herbal) have been investigated for major, minor and trace elements using the proton induced X-ray emission (PIXE) method. The samples were collected from the local market in Dhaka city and they were analysed by the thick-target external beam technique of the PIXE method. The samples were exposed to the proton beam as 1-mm thick pellet 0 f 7 mm dia. and irradiated with 2.0 MeV proton having 10 nA beam intensity. for 10-20 μC irradiation, the concentration of 15 elements,K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Br, Rb, Sr, Zr and Pb were measured by comparison with calibration factors obtained from a curve constructed on the basis of the NBS orchard leaf standard (SRM-1571) irradiated under identical experimental condition. The concentration of K and Ca observed in the samples were in the range of 0.34-5.96% and .11-3.98% respectively. For Mn, Fe, Cu, Zn, Cr, As and Pb the concentration ranges were 4.1-1100, 60-7600, 1.1-276, 7-164, 1.2-48, 1.1-31, and 3.1-128 mg/kg respectively. Ti, Br, Rb, Sr and Zr were also determined with variable accuracy. The validity of the procedure was established by analysing a NIST standard (tomato leaf). The results obtained were in good agreement with the certified values. 17 refs.,3 tables, 3 figs

  16. Study of fuel element characteristic of SM and SMP (SM-PRIMA) fuel assemblies

    International Nuclear Information System (INIS)

    Klinov, A.V.; Kuprienko, V.A.; Lebedev, V.A.; Makhin, V.M.; Tuchnin, L.M.; Tsykanov, V.A.

    1999-01-01

    The paper discusses the techniques and results of reactor tests and post-reactor investigations of the SM reactor fuel elements and fuel elements developed in the process of designing the specialized PRIMA test reactor with the SM reactor fuel elements used as a prototype and which are referred to as the SMP fuel elements. The behavior of fuel elements under normal operating conditions and under deviation from normal operating conditions was studied to verify the calculation techniques, to check the calculation results during preparation of the SM reactor safety substantiation report and to estimate the possibility of using such fuel elements in other projects. During tests of fuel rods under deviation from normal operating conditions their advantages were shown over fuel elements, the components of which were produced using the Al-based alloys. (author)

  17. PIXE analysis for bioaccumulation studies of trace elements

    International Nuclear Information System (INIS)

    Iwata, Y.; Satoh, A.; Sasaki, Y.; Ito, R.; Kuramachi, K.

    2005-01-01

    Bioaccumulation by micro-alga in the ocean was simulated in nutritive seawater containing known amounts of trace metals, and the concentration factors for Fe, Zn and Cd were measured by PIXE. Trace transition metals in nearshore seawater were removed by Chelex-100. Then a culture solution was prepared by adding known amounts of trace metals and nutritive salts to the purified seawater. Marine micro-algae (Nannochloropsis sp., and Phaeodactylum sp.,) were purely cultured in the culture solution. An interested metal ion was added to the culture solution (0.01-5.0 mg/l). Alga in 10 ml of the culture solution was collected on a polycarbonate filter (pore size: 1.0 ) by suction filtration and subjected to 2.9 MeV proton bombardment. Na, Mg, Al, Si, P, S, Cl, K, Ca, Cr, Mn, Fe, Zn and Cd were simultaneously determined. PIXE multi-element analysis was possible using less than 1 mg of analytical sample. The quantity of the metal in the alga was increased in proportion to the concentration in the culture solution. The concentration factors for Zn, Fe and Cd were measured, e.g., 10200 ± 300 ml/g to Zn for Phaeodactylum. The trend of the affinity for the trace metals in the case of Nannochloropsis was Fe 3+ > Zn 2+ > Pb 2+ > Cd 2+ . (author)

  18. THE CONSTITUENT ELEMENTS OF DISCIPLINARY TRANSGRESSION. STUDY CASE

    Directory of Open Access Journals (Sweden)

    Dragoş Lucian Rădulescu

    2017-12-01

    Full Text Available The main effect of non-compliance of the employees with respect to the obligations resulting from the employment legal relations is the application of the specific ways of accomplishing the discipline of labor. In this respect we can state that the discipline of labor is not only a system of norms that allows the employee to meet the requirements resulting from the labor relations, mainly through the possibility of applying the specific disciplinary sanctions, but also of a preventive or stimulatory character under the aspect of forms of labor organization. As regards the principle of employee subordination in the legal relationship with the employer, in relation to his/her obligation to respect a well-established system of norms issued for the purpose of labor process, failure to comply with the resulting obligations leads to the possibility of applying sanctions for violation of the labor discipline. The article presents the conditions for the non-compliance of the obligations resulting from the employment relationships of civil servants, the legal basis specific to the violation of specific duties, the way of individualization of the sanction applied, as well as elements of judicial practice.

  19. Tribological study on machine elements of HTGR components

    International Nuclear Information System (INIS)

    Nemoto, M.; Asanabe, S.; Kawaguchi, K.; Ono, S.; Oyamada, T.

    1980-01-01

    There are some tribological features peculiar to machines used in a high-temperature gas-cooled reactor (HTGR) plant. In this kind of plant, water-lubricated bearing combined with the buffer gas sealing system and/or gas-lubricated bearings are often applied in order to prevent degrading of the purity of coolant helium gas. And, it is essential for the reliability and safety design of the sliding members in the HTGR to obtain fundamental data on their friction and wear in high-temperature helium atmosphere. In this paper, the results of tests on these bearings and sliding members are introduced, which are summarized as follows: (1) Water-lubricated shrouded step thrust bearing and buffer gas sealing system were tested separately under the conditions simulated to those of circulators used in commercial plants. The results showed that each elements satisfies the requirements. (2) A hydrostatically gas-lubricated, pivoted pad journal bearing with a moat-shaped rectangular groove is found to be promising for use as a high-load bearing, which is indispensable for the development of a large-type circulator. (3) Use of ceramic coating and carbon graphite materials is effective for the prevention of adhesive wear which is apt to occur in metal-to-metal combinations. (author)

  20. Tribological study on machine elements of HTGR components

    International Nuclear Information System (INIS)

    Nemoto, Masaaki; Ono, Shigeharu; Asanabe, Sadao; Kawaguchi, Katsuyuki; Oyamada, Tetsuya.

    1981-11-01

    There are some tribological features peculiar to machines used in a high-temperature gas-cooled reactor (HTGR) plant. In this kind of plant, water-lubricated bearing combined with the buffer gas sealing system and/or gas-lubricated bearings are often applied in order to prevent degrading of the purity of coolant helium gas. And, it is essential for the reliability and safety design of the sliding members in the HTGR to obtain fundamental data on their friction and wear in high-temperature helium atmosphere. In this paper, the results of tests on these bearings and sliding members are introduced, which are summarized as follows: (1) Water-lubricated shrouded step thrust bearing and buffer gas sealing system were tested separately under the condition simulated to those of circulators used in commercial plants. The results showed that each elements satisfies the requirements. (2) A hydrostatically gas-lubricated, pivoted pad journal bearing with a moat-shaped rectangular groove is found to be promising for use as a high-load bearing, which is indispensable for the development of a large-type circulator. (3) Use of ceramic coating and carbon graphite materials is effective for the prevention of adhesive wear which is apt to occur in metal-to-metal combinations. (author)

  1. Energy-dispersive X-ray fluorescence study of elemental uptake in ...

    Indian Academy of Sciences (India)

    The present study suggests that the elemental concentrations in the root soils and leaves of the samples vary from farm to farm, whereby the concentrations of Cu, ... But, the most notable feature of this study is the strikingly similar elemental concentrations in the edible flower part of all samples irrespective of the type of soil.

  2. Principal elements of the Basalt Waste Isolation Project performance assessment studies

    International Nuclear Information System (INIS)

    Baca, R.G.; Wilde, R.T.

    1983-12-01

    In this paper, three of the principal elements of the Basalt Waste Isolation Project (BWIP) performance assessment studies are focused on: (1) development of a methodology for probabilistic risk assessment, (2) performance analyses of repository subsystems, and (3) selection and ranking of disruptive event scenarios. Other elements of the BWIP performance assessment studies are briefly outlined. 12 references, 5 figures

  3. Micromechanical Study of Interface Stress in a Fiber-Reinforced Composite under Transverse Loading Using Boundary Element Method

    National Research Council Canada - National Science Library

    Eren, Hakan

    2000-01-01

    .... The objective of this study is, by using Boundary Element Method, to examine different shapes of reinforcement elements under unit traction and unit displacement boundary conditions in transversal...

  4. Critical Elements of Student Assistance Programs: A Qualitative Study

    Science.gov (United States)

    Torres-Rodriguez, Leslie; Beyard, Karen; Goldstein, Marc B.

    2010-01-01

    Student assistance programs (SAPs) are one approach for using teams to respond to student needs, but there is little research on SAP implementation and whether SAPs function as intended. The authors present findings from a study of two SAPs that use a model developed by Connecticut's Governor's Prevention Partnership. The study focused on…

  5. Finite element study of a HDR-RPV-section including a nozzle under thermal shock transient

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E [Stuttgart Univ. (Germany); Katzenmeier, G [Forschungszentrum Juelich GmbH (Germany); Wanner, R; Mercier, O [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1988-12-31

    This document presents a finite element study of a reactor pressure vessel section under thermal stresses. The strength properties of the vessel walls are studied as well as cracks due to the thermo-shock transient. (TEC). 6 refs.

  6. The Study Abroad Experience: A Crucial Element in Globalizing Business School Programs

    Science.gov (United States)

    Mangiero, George A.; Kraten, Michael

    2011-01-01

    Globalization is a fundamental reality of modern business practice. Participation in a study abroad program is a crucial element in helping students become well rounded global business leaders; it is an increasingly important element of a well rounded business curriculum. A semester or summer abroad, properly conceived and designed, can provide…

  7. An introductory study of the convergence of the direct boundary element method

    DEFF Research Database (Denmark)

    Juhl, Peter Møller

    1997-01-01

    of an axisymmetric boundary element formulation is studied using linear, quadratic or superparametric elements. It is demonstrated that the rate of convergence of these formulations is reduced for calculations involving bodies with edges (geometric singularities). Two methods for improving the rate of convergence...

  8. Space-Based Space Surveillance Logistics Case Study: A Qualitative Product Support Element Analysis

    Science.gov (United States)

    2017-12-01

    REPORT TYPE AND DATES COVERED Joint applied project 4. TITLE AND SUBTITLE SPACE-BASED SPACE SURVEILLANCE LOGISTICS CASE STUDY: A QUALITATIVE ...INTENTIONALLY LEFT BLANK v ABSTRACT This research provides a qualitative analysis of the logistics impacts, effects, and sustainment challenges...provides a qualitative product support element-by-element review for both research questions. Chapters IV and V present the findings, results

  9. Parametric Studies of Square Solar Sails Using Finite Element Analysis

    Science.gov (United States)

    Sleight, David W.; Muheim, Danniella M.

    2004-01-01

    Parametric studies are performed on two generic square solar sail designs to identify parameters of interest. The studies are performed on systems-level models of full-scale solar sails, and include geometric nonlinearity and inertia relief, and use a Newton-Raphson scheme to apply sail pre-tensioning and solar pressure. Computational strategies and difficulties encountered during the analyses are also addressed. The purpose of this paper is not to compare the benefits of one sail design over the other. Instead, the results of the parametric studies may be used to identify general response trends, and areas of potential nonlinear structural interactions for future studies. The effects of sail size, sail membrane pre-stress, sail membrane thickness, and boom stiffness on the sail membrane and boom deformations, boom loads, and vibration frequencies are studied. Over the range of parameters studied, the maximum sail deflection and boom deformations are a nonlinear function of the sail properties. In general, the vibration frequencies and modes are closely spaced. For some vibration mode shapes, local deformation patterns that dominate the response are identified. These localized patterns are attributed to the presence of negative stresses in the sail membrane that are artifacts of the assumption of ignoring the effects of wrinkling in the modeling process, and are not believed to be physically meaningful. Over the range of parameters studied, several regions of potential nonlinear modal interaction are identified.

  10. Studies on rare earth elements in seawater and uptake by marine organisms

    International Nuclear Information System (INIS)

    Suzuki, H.; Koyanagi, T.; Saiki, M.

    1975-01-01

    The contents of rare earth elements in marine environmental samples were determined by neutron activation analysis to examine the existing state in coastal seawater and the concentration by marine organisms of the elements. Seawater was filtered through a Millipore filter GS (pore size 0.22 μm), before the analysis. Some of the seawater was treated with HC1 solution before filtration and some after filtration. Certain marine organisms were also analysed for determination of rare earth elements. These were: flounder (Paralichthys olivaceus); yellowtails (Seriola quinqueradiata); immature anchovy (Engraulis japonica); clams (Meretrix lusoria); green algae (Ulva pertusa); brown algae (Hizikia fusiforme, Sargassum fulvellum, Undaria pinnatifida). In the seawater without HC1 treatment before filtration, considerable amounts of the elements existed in residue on the filter, whereas in the seawater treated with HC1 before filtration, the greater part remained in the dissolved state. Concentration factors calculated from the contents of stable elements, therefore, are affected remarkably by the existing state of the elements in seawater. If only the dissolved state is assumed available for marine organisms, values one order higher are attained compared with the case where total amounts of the elements were used for the calculation. However, the contribution of the insoluble state seems to be not negligible with some organisms. The higher concentration factors for immature anchovy and clams observed in this study were considered to be caused by surface adsorption of elements in particulate form and also ingested sediment with high element concentration. (author)

  11. Pharmacognostic studies and elemental analysis of the aerial parts ...

    African Journals Online (AJOL)

    Findings from this study revealed the presence of some diagnostic microscopical features such as paracytic stomata, unicellular covering trichomes with cystoliths, prismatic calcium oxalate crystals and annular xylem vessels. Quantitative physical constants include moisture contents (5.5 %), ash value (17 %), acid insoluble ...

  12. Comparative study of trace element levels in some local vegetable ...

    African Journals Online (AJOL)

    The level of heavy metals in two varieties of vegetables harvested during the dry and wet seasons from seven different locations in Ilorin, Nigeria, were determined. The correlation between the level of metals in the vegetables and the irrigation water was also studied. Vegetables harvested during the dry season were found ...

  13. Elements of Motivational Structure for Studying Mechanical Engineering

    Science.gov (United States)

    Dubreta, Nikša; Miloš, Damir

    2017-01-01

    The article presents the findings on students' reasons for studying mechanical engineering. These reasons were covered in terms of extrinsic and intrinsic motivation additionally related to selected independent variables of the sample--students' secondary school Grade Point Average, their gender and the socio-economic status. The research was…

  14. Finite element model to study two dimensional unsteady state ...

    African Journals Online (AJOL)

    Kunal Pathak

    2015-10-20

    Oct 20, 2015 ... free Ca2+, endogenous Ca2+ binding proteins and other. ''Ca2+ buffers” ... in the literature for the study of calcium dynamics in myocytes.1,2,20,21 ... Since Ca2+ has a molecular weight that is small in compar- ison with most ...

  15. Finite Element Studies on Hollow Steel Columns under Multi ...

    African Journals Online (AJOL)

    ... of the model in parametric studies and for the formulation of biaxial interaction curves for seismic design. Thus, the significance of FE program as a modern tool for research and design of complex loading conditions and structures is demonstrated. Journal of Civil Engineering Research and Practice Vol.1(1) 2004: 33-49 ...

  16. The role of sample preparation in interpretation of trace element concentration variability in moss bioindication studies

    Science.gov (United States)

    Migaszewski, Z.M.; Lamothe, P.J.; Crock, J.G.; Galuszka, A.; Dolegowska, S.

    2011-01-01

    Trace element concentrations in plant bioindicators are often determined to assess the quality of the environment. Instrumental methods used for trace element determination require digestion of samples. There are different methods of sample preparation for trace element analysis, and the selection of the best method should be fitted for the purpose of a study. Our hypothesis is that the method of sample preparation is important for interpretation of the results. Here we compare the results of 36 element determinations performed by ICP-MS on ashed and on acid-digested (HNO3, H2O2) samples of two moss species (Hylocomium splendens and Pleurozium schreberi) collected in Alaska and in south-central Poland. We found that dry ashing of the moss samples prior to analysis resulted in considerably lower detection limits of all the elements examined. We also show that this sample preparation technique facilitated the determination of interregional and interspecies differences in the chemistry of trace elements. Compared to the Polish mosses, the Alaskan mosses displayed more positive correlations of the major rock-forming elements with ash content, reflecting those elements' geogenic origin. Of the two moss species, P. schreberi from both Alaska and Poland was also highlighted by a larger number of positive element pair correlations. The cluster analysis suggests that the more uniform element distribution pattern of the Polish mosses primarily reflects regional air pollution sources. Our study has shown that the method of sample preparation is an important factor in statistical interpretation of the results of trace element determinations. ?? 2010 Springer-Verlag.

  17. Experimental study of particulate fouling onto heat exchanger elements

    International Nuclear Information System (INIS)

    Chandrasa

    1994-01-01

    An experimental study of particulate fouling onto tubular heat exchanger surfaces was carried out using sodium sulfate particles. An experimental apparatus equipped with an aerosol generator has been used to examine the deposition of small particles under controlled conditions. Two sets of experiments were performed. Firstly, the deposition against time of solid particles onto single heat exchanger tube in cross-flow was studied. The effects of a number variables such as particle size, gas velocity and temperature on the deposition was analysed. Secondly, the deposition for the aerosol particles as they passed through a bank of finned tubes was examined. The deposition patterns on various tubes depended on local conditions (velocity and temperature) within the bank. It was found that the fouling resistance increases as aerosol flow rate decreases. The smaller particles showed higher fouling resistance. (author) [fr

  18. Muoniated radical states in the group 16 elements: Computational studies

    International Nuclear Information System (INIS)

    Macrae, Roderick M.

    2009-01-01

    Recent experimental studies on positive muon implantation in silicon, selenium, and tellurium have been interpreted on the basis that the primary paramagnetic species observed is XMu (X=S, Se, or Te), the muonium-substituted analog of the appropriate diatomic chalcogen monohydride radical. However, temperature-dependent signal visibility, broadening, and hyperfine shift effects remain puzzling. The interplay of degeneracy, spin-orbit coupling, and vibrational averaging in these species makes them computationally challenging despite their small size. In this work computational studies are carried out on all hydrogen isotopomers of the series OH, SH, SeH, and TeH. Several different methodological approaches are compared, and the effects of wavefunction symmetry, spin-orbit coupling, and zero-point vibrational corrections on the isotropic and anisotropic components of the hyperfine interaction are examined. Additionally, some models of the Mu site in rhombic sulfur are briefly considered.

  19. Elements of Motivational Structure for Studying Mechanical Engineering

    OpenAIRE

    Nikša Dubreta; Damir Miloš

    2017-01-01

    The article presents the findings on students' reasons for studying mechanical engineering. These reasons were covered in terms of extrinsic and intrinsic motivation additionally related to selected independent variables of the sample – students' secondary school Grade Point Average, their gender and the socio-economic status. The research was conducted with the first year students of the Faculty of Mechanical Engineering at the University of Zagreb, Croatia. The sample consisted of 282 stude...

  20. Criticality study of PWR fuel elements separated by concrete shields

    International Nuclear Information System (INIS)

    Guillemot, M.; Colomb, G.; Maubert, L.

    1984-01-01

    The development of nuclear energy involved a need of neutronic shield studies to reduce the size and the cost of nuclear liquid storage units, of storage pools, and of transport casks. A concrete has been developed of the laboratory of concretes and coatings of Saclay; the validation of calculation codes including this material, as also the presence of free water and linked water necessitated an experimental confirmation of which program is presented here [fr

  1. Study of the interactions between organic matter and transuranic elements

    International Nuclear Information System (INIS)

    Moulin, V.; Billon, A.; Theyssier, M.; Dellis, T.

    1991-01-01

    The study of the occurrence of humic substances present in natural waters and their physico-chemical properties, in particular their complexing behaviour, constitutes the main objectives of this research programme. In the first part, the report presents the description of the selected aquifer (representative of a granitic geological formation: Fanay-Augeres), the method for the collection and concentration of the humic substances (a sorption technique) and their characterization by different physico-chemical techniques (elementary and mineral composition, spectroscopic properties, size, proton capacity, datation). The results show that Fanay-Augeres humic substances (considered as site-specific humic substances) represent 41% of the total organic carbon (TOC) present in the aquifer (2ppm) and have properties similar to other aquatic humic substances. The second part describes the study of the interactions occurring between these humic substances and trivalent cations (Eu and Am). Two different analytical methods have been developed to perform these investigations: spectrophotometry and size-exclusion chromatography. Interaction constants and complexing capacities have been determined and compared with literature data. Fanay-Augeres humic substances present complexing for trivalent actinides which agrees with published data. Further developments needed in complexation studies are described. 10 figs.; 15 tabs.; 39 refs

  2. Study of electric capacitors using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Alina Neamț

    2012-12-01

    Full Text Available A capacitor is made of two armatures and a dielectric between the two armatures. In this paper, we are going to study the plane capacitor , which is made of two equal metal armatures, plane and parallel, having the S surface, situated at a distance d much shorter than the armatures dimensions, between which there is a liniar, homogenous and isotropic dielectric having a constant electrical permittivity.The purpose of studying the plane capacitor, through MEF, presented in this paper,is to establish the stress to which the dielectrics may be subject to, in daily practice, and the influence that their superposition in an electric field has, on each of them. The study of the plane capacitor , finalised with observations on the raise of the dependence of the electric field intensity in air on the size of the air layer and having as parameter the type of dielectric material introduced between the armatures, is an example of confirmation or invalidation of the possibility and utility of using layers of dielectrics between the armatures of the capacitors.

  3. Elemental concentration distribution in human fingernails – A 3D study

    International Nuclear Information System (INIS)

    Pineda-Vargas, C.A.; Mars, J.A.; Gihwala, D.

    2012-01-01

    The verification of pathologies has normally been based on analysis of blood (serum and plasma), and physiological tissue. Recently, nails and in particular human fingernails have become an important medium for pathological studies, especially those of environmental origin. The analytical technique of PIXE has been used extensively in the analysis of industrial samples and human tissue specimens. The application of the analytical technique to nails has been mainly to bulk samples. In this study we use micro-PIXE and -RBS, as both complementary and supplementary, to determine the elemental concentration distribution of human fingernails of individuals. We report on the 3D quantitative elemental concentration distributions (QECDs) of various elements that include C, N and O as major elements (10–20%), P, S, Cl, K and Ca as minor elements (1–10%) and Fe, Mn, Zn, Ti, Na, Mg, Cu, Ni, Cr, Rb, Br, Sr and Se as trace elements (less than 1%). For PIXE and RBS the specimens were bombarded with a 3 MeV proton beam. To ascertain any correlations in the quantitative elemental concentration distributions, a linear traverse analysis was performed across the width of the nail. Elemental distribution correlations were also obtained.

  4. Radiation damage studies of straw tube and scintillating fiber elements

    International Nuclear Information System (INIS)

    Dunn, W.L.; Elleman, T.S.; Goshaw, A.T.; Oh, S.H.; Robertson, W.J.; Grimes, A.; Leedom, I.; Reucroft, S.

    1990-01-01

    The authors report on the results of mixed-field irradiations of straw-tube, plastic scintillating fiber, and avalanche photodiode components. These irradiations are being carried out at the one-MW PULSTAR research reactor facility at North Carolina State University. A special sample holder was designed that allows relatively uniform irradiation of samples up to 5 ft long, without bending or coiling. A systematic irradiation program is underway that allows study of total fluence, fluence-rate, and neutron spectral effects. Samples have been exposed to neutron fluences as high as 2 x 10 16 cm -2

  5. A study of element migration in the Maqarin site (Jordan) by the means of column experiments: I. major elements

    International Nuclear Information System (INIS)

    Trotignon, L.; Bienvenu, P.; Rose, J.; Bulle, C.; Crouzet, N.; Khoury, H.

    2005-01-01

    Full text of publication follows: The site of Maqarin (Jordan), in which natural cements occur as a result of the combustion metamorphism of a bio-micrite, is studied since 1989 as a natural analogue for the long term evolution of a cementitious repository environment [1]. In order to better understand and simulate observed elemental migrations along high pH groundwater plumes, laboratory scale column experiments were conducted in which crushed materials (cement, bio-micrite) collected on site were submitted to leaching by deionized water or Ca(OH) 2 equilibrated solutions. The evolution of pH and major elements was monitored in leachates (Ca, SO 4 , Si, Al) during the experiments. Simulations of the experiments were attempted using the reactive transport code Hytec (Ecole des Mines de Paris and Pole Geochimie Transport). The column experiments presented here contribute to a better understanding of the evolution of hyper-alkaline waters in Maqarin. They suggest several key parameters to be taken into account in the modelling of such systems: - the rate limited precipitation of CSH phases; - the pH dependence of ettringite dissolution (and probably precipitation); - the competition in the availability of Al and Si from the bio-micrite, showing to be a critical issue for modeling the alkaline perturbation Further experiments and modeling of this type is needed to understand how (and how fast) Maqarin groundwaters acquire their high pH. Such information will be useful to better bracket the extent of precipitation of secondary CSH phases in the near field of a repository. [1] Khoury H.N., Salameh E., Clark I.D., Fritz P., Bajjali W., Milodowski A.E., Cave M.R. and Alexander W.R. 1992. A natural analogue of high pH cement pore waters from the Maqarin area of northern Jordan. I: Introduction to the site. J. Geochem. Explor. 46: 117-132. (authors)

  6. Dynamic stall study of a multi-element airfoil

    Science.gov (United States)

    Tung, Chee; Mcalister, Kenneth W.; Wang, Clin M.

    1992-01-01

    Unsteady flow behavior and load characteristics of a VR-7 airfoil with and without a slat were studied in the water tunnel of the Aeroflightdynamics Directorate, NASA Ames Research Center. Both airfoils were oscillated sinusoidally between 5 and 25 degrees at a Reynolds number of 200,000 to obtain the unsteady lift, drag and pitching moment data. A fluorescing dye was released from an orifice located at the leading edge of the airfoil for the purpose of visualizing the boundary layer and wake flow. The flow field and load predictions of an incompressible Navier-Stokes code based on a velocity-vorticity formulation were compared with the test data. The test and predictions both confirm that the slatted VR-7 airfoil delays both static and dynamic stall as compared to the VR-7 airfoil alone.

  7. Discrete Element study of granular material - Bumpy wall interface behavior

    Science.gov (United States)

    El Cheikh, Khadija; Rémond, Sébastien; Pizette, Patrick; Vanhove, Yannick; Djelal, Chafika

    2016-09-01

    This paper presents a DEM study of a confined granular material sheared between two parallel bumpy walls. The granular material consists of packed dry spherical particles. The bumpiness is modeled by spheres of a given diameter glued on horizontal planes. Different bumpy surfaces are modeled by varying diameter or concentration of glued spheres. The material is sheared by moving the two bumpy walls at fixed velocity. During shear, the confining pressure applied on each bumpy wall is controlled. The effect of wall bumpiness on the effective friction coefficient and on the granular material behavior at the bumpy walls is reported for various shearing conditions. For given bumpiness and confining pressure that we have studied, it is found that the shear velocity does not affect the shear stress. However, the effective friction coefficient and the behavior of the granular material depend on the bumpiness. When the diameter of the glued spheres is larger than about the average grains diameter of the medium, the latter is uniformly sheared and the effective friction coefficient remains constant. For smaller diameters of the glued spheres, the effective friction coefficient increases with the diameter of glued spheres. The influence of glued spheres concentration is significant only for small glued spheres diameters, typically half of average particle diameter of the granular material. In this case, increasing the concentration of glued spheres leads to a decrease in effective friction coefficient and to shear localization at the interface. For different diameters and concentrations of glued spheres, we show that the effect of bumpiness on the effective friction coefficient can be characterized by the depth of interlocking.

  8. A study of pollution extent in some drinking water resources by heavy elements in Hadramout governorate

    International Nuclear Information System (INIS)

    Barheyan, Saad Awadh

    2001-01-01

    The paper is considered as a preliminary study of pollution extent in some drinking water resources in Hadramout governorate by heavy elements which differ in their toxicity. The elements subjected to study are Cd, Pb, Fe, Cr, Mn, Zn, Co and Cu. Atomic absorption spectrometric method of analysis (AAS) is used for the determination of heavy elements concentrations. The elemental analysis of drinking water samples shows that the concentration of the above-mentioned elements in drinking water resources, lies in the permissible limit given by the WHO. Similarity of elements content is observed in Thela and Fuwah waters, bu the case is different for Ghail Bawzeer and Asshihir waters due to their different lithospheric structures. Drinking water used by the civilians is not subjected to physical, biological or chemical treatment which may lead to total or partial removal of heavy elements and other rejected impurities. Drinking water running in distribution nets is a hard water and has a weak base (Ph which explains the reason why heavy elements are absorbed and precipitated inside drinking water pipes before they reach consumers. This type of hard water causes accumulation of salt precipitates inside the water pipes which results in many economic and health disturbances to consumers. The slight increase of Cr, Mn, and Co concentration in drinking water flowing in the pipes may be due to the effect of some anions such as nitrates which form soluble compounds with the elements contained in the chemical composition of the drinking water pipes. This paper is a strong indicator for determination of heavy elements concentrations in different drinking water resources in Hadramout govemorate. Such approach seeks a further comprehensive work with special focus on the study of lithospheric structure of the feeding water regions of Hadramout aquifers. (author)

  9. Studies of generalized elemental imbalances in neurological disease patients using INAA [instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Ehmann, W.D.; Vance, D.E.; Khare, S.S.; Kasarskis, E.J.; Markesbery, W.R.

    1988-01-01

    Evidence has been presented in the literature to implicate trace elements in the etiology of several age-related neurological diseases. Most of these studies are based on brain analyses. Using instrumental neutron activation analysis (INAA), we have observed trace element imbalances in brains of patients with Alzheimer's disease, amyotrophic lateral sclerosis (ALS), and Picks's disease. The most prevalent elemental imbalances found in the brain were for bromine, mercury, and the alkali metals. In this study the authors report INAA studies of trace elements in nonneural tissues from Alzheimer's disease and ALS patients. Samples from household relatives were collected for use as controls wherever possible. Hair samples were washed according to the International Atomic Energy Agency recommended procedure. Fingernail samples were scraped with a quartz knife prior to washing by the same procedure. For ALS patients, blood samples were also collected. These data indicate that elemental imbalances in Alzheimer's disease and ALS are not restricted to the brain. Many elements perturbed in the brain are also altered in the several nonneural tissues examined to date. The imbalances in different tissues, however, are not always in the same direction. The changes observed may represent causes, effects, or simply epiphenomena. Longitudinal studies of nonneural tissues and blood, as well as tissue microprobe analyses at the cellular and subcellular level, will be required in order to better assess the role of trace elements in the etiology of these diseases

  10. Preliminary study of elemental composition in tree leaves for using as bio monitor for air pollution

    International Nuclear Information System (INIS)

    Chueinta, Wanna; Bunprapob, Supamatthree

    2004-10-01

    The use of plant tissue as biological monitor of air pollution has been of interest world wild. The study on chemical composition of such biological monitor may provide important information on the levels and pathways of a variety of pollutants including heavy metals and trace toxic elements in atmosphere. The appropriate bio monitors are such as herbaceous plants, tree leaves, bryophytes and lichens, with their possible advantages and/or limitations. In this research an investigation of element composition in leaves was performed. The technique of Instrument Neutron Activation Analysis (INAA) was developed to determine heavy metal and trace elements in 8 species of tree leaves collected from 3 different locations. From the experiments, it was found that content of elements might vary depending on species and environment. Some specific elements are discussed and compared in this report

  11. Physicochemical and elemental studies of Hydrocotyle javanica Thunb. for standardization as herbal drug

    Directory of Open Access Journals (Sweden)

    Manab Mandal

    2017-11-01

    Conclusions: Hence the present physicochemical and elements studies reveals that the plant Hydrocotyle javanica Thunb. could be a potent source of herbal preparation as well as a safe and novel synthetic antibacterial drug.

  12. Transplutonium elements

    Energy Technology Data Exchange (ETDEWEB)

    Sivaramakrishnan, C. K.; Jadhav, A. V.; Reghuraman, K.; Mathew, K. A.; Nair, P. S.; Ramaniah, M. V.

    1973-07-01

    Research progress is reported on studies of the transplutonium elements including recovery and purification of americium, preparation of /sup 238/Pu, extraction studies using diethylhexyl phosphate. (DHM)

  13. Recent studies of nuclear and chemical properties of elements 103, 104 and 105

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1990-08-01

    Information obtained since 1983 on the nuclear and chemical properties of element 103, the last on the actinide series, and elements 104 and 105, at the beginning of the transactinide series, is reviewed. Their chemical properties are compared with their lanthanide and lighter group 4 and 5 homologs and evidence for possible relativistic effects is discussed. The current knowledge of the nuclear properties of these elements and how these affect of the study of chemical properties is discussed. Some of the challenges involved in the study of short-lived isotopes which can only be produced an ''atom-at-a-time'' at an appropriate accelerator and the prognosis for future studies of these and still heavier elements are considered. 40 refs., 4 figs

  14. Preparation and intercalation study of ternary transition elements chalcogenides AxMXn

    International Nuclear Information System (INIS)

    Kassem, M.

    1999-01-01

    The crystalline powders of transition elements chalcogenides have been prepared by solid-solid reaction method starting from elemental powders in evacuated and sealed quartz tubes heated at various temperatures depending on the compound to be prepared. The structures and composition of the obtained compounds have been studied by X-ray diffraction and X-ray fluorescence techniques. Intercalation compounds Co x MX 2 have been obtained by heating the powder with elemental cobalt at 500 Centigrade. The results of the structural studies show that the intercalation of cobalt is a regular phenomena and the cobalt atoms play the role of staples for the layers constructing the crystalline structure of starting materials. This stapling phenomena is accompanied by changes in distance between the layers and therefore changes in the length of bonds between the elements of compound. The changes in the length of bonds have been confirmed by the results of FTIR studies.(author)

  15. Quantifying Volcanic Emissions of Trace Elements to the Atmosphere: Ideas Based on Past Studies

    Science.gov (United States)

    Rose, W. I.

    2003-12-01

    Extensive data exist from volcanological and geochemical studies about exotic elemental enrichments in volcanic emissions to the atmosphere but quantitative data are quite rare. Advanced, highly sensitive techniques of analysis are needed to detect low concentrations of some minor elements, especially during major eruptions. I will present data from studies done during low levels of activity (incrustations and silica tube sublimates at high temperature fumaroles, from SEM studies of particle samples collected in volcanic plumes and volcanic clouds, from geochemical analysis of volcanic gas condensates, from analysis of treated particle and gas filter packs) and a much smaller number that could reflect explosive activity (from fresh ashfall leachate geochemistry, and from thermodynamic codes modeling volatile emissions from magma). This data describes a highly variable pattern of elemental enrichments which are difficult to quantify, generalize and understand. Sampling in a routine way is difficult, and work in active craters has heightened our awareness of danger, which appropriately inhibits some sampling. There are numerous localized enrichments of minor elements that can be documented and others can be expected or inferred. There is a lack of systematic tools to measure minor element abundances in volcanic emissions. The careful combination of several methodologies listed above for the same volcanic vents can provide redundant data on multiple elements which could lead to overall quantification of minor element fluxes but there are challenging issues about detection. For quiescent plumes we can design combinations of measurements to quantify minor element emission rates. Doing a comparable methodology to succeed in measuring minor element fluxes for significant eruptions will require new strategies and/or ideas.

  16. Study of the elemental content in mollusk from Uruguayan's coast by X-ray fluorescence

    International Nuclear Information System (INIS)

    Bernasconi, G.; Odino, R.; Souto, B.; Mendez, Silvia

    1992-01-01

    The main objective of the study is to establish a starting point on the content of trace elements, either with a toxic and/or nutritional interest, in Uruguayan coastal mollusks. The River Plate is located between Argentina and Uruguay and has an estuarine nature. It is thus a zone with distinctive features among the South American Atlantic coasts. The analysis techniqe employed is X-ray fluroescence, which is non-destructive and multi-elemental. A simple way of sample preparation is proposed, which does not use reagents that may introduce foreign elements, and is therefore low cost. tabs

  17. Thermohydraulic study of a MTR fuel element aimed at the construction of an irradiation facility

    International Nuclear Information System (INIS)

    Coragem, Helio Boemer de Oliveira

    1980-01-01

    A thermohydraulic study of MTR fuel element is presented as a basic requirement for the development of an irradiation facility for testing fuel elements. A computer code named 'Thermo' has been developed for this purpose, which can stimulate different working conditions, such as, cooling, power elements and neutron flux, performing all pertinent thermohydraulic calculations. Thermocouples were used to measure the temperature gradients of the cooling fluid throughout the IEAR-1 reactor core. All experimental data are in good agreement with the theoretical model applied in this work. Finally, a draft of the proposed facility and its safety system is presented. (author)

  18. Study of mobilization and speciation of trace elements in coal pyrolysis

    International Nuclear Information System (INIS)

    Ting, B.T.G.

    1979-01-01

    Various types of coal contain high levels of a number of trace elements. Little is known of the fates of these trace elements during the conversion of coal to liquid and gaseous products. Studies were undertaken of mobilization and speciation of trace elements in coal pyrolysis, one of the major coal conversion processes. The bituminous coal was pyrolyzed to produce liquid and gaseous products. The pyrolysis products were collected in traps in an inert gas stream. In addition mildly hydrogenated coal was prepared by mixing with tetralin, a hydrogen donor solvent, at boiling temperature. In order to characterize each element specifically during pyrolysis, base samples of coal and mildly hydrogenated coal (H-coal) were spiked with heavy metal sulfides, trace metals bound to partially oxidized coal (coal humates), and halide salts prior to carrying out pyrolysis. Eight elements were investigated in this research. They are As, Br, Cl, Co, Cr, Mn, Se, and V. Pre-spiked hydrogenated coal, i.e., pulverized coal spiked with halide salts and heavy metal sulfides then hydrogenated with tetralin, was prepared and studied for the fates of these elements during pyrolysis. Chlorinated and brominated coals were also prepared to compare the volatility differences between organically and inorganically bound halogens during the pyrolysis reaction. These products and the coal char residues were analyzed for the spiked elements mainly by neutron activation analysis for the spiked elements to determine their degree of volatility. Volatility and recovery (mass balance) will be discussed for those elements that appeared highly volatile during pyrolysis. In order to understand the halogenated compounds in the pyrolysis products, gas chromatograms were taken to the collected pyrolysis products of coal, hydrogenated coal, NaCl spiked coal, NaBr spiked coal, chlorinated coal, and brominated coal

  19. The interplay of contextual elements in implementation: an ethnographic case study.

    Science.gov (United States)

    McCullough, Megan B; Chou, Ann F; Solomon, Jeffrey L; Petrakis, Beth Ann; Kim, Bo; Park, Angela M; Benedict, Ashley J; Hamilton, Alison B; Rose, Adam J

    2015-02-14

    Contextual elements have significant impact on uptake of health care innovations. While existing conceptual frameworks in implementation science suggest contextual elements interact with each other, little research has described how this might look in practice. To bridge this gap, this study identifies the interconnected patterns among contextual elements that influence uptake of an anticoagulation clinic improvement initiative. We completed 51 semi-structured interviews and ethnographic observations across five case study sites involved in an evidence-based practice (EBP) quality improvement initiative. We analyzed data in NVivo 10 using an a priori approach based on the Promoting Action on Research Implementation in Health Services (PARIHS) model and an emergent thematic analysis. Key contextual elements, such as leadership, teamwork, and communication, interacted with each other in contributing to site-level uptake of the EBP, often yielding results that could not be predicted by looking at just one of these elements alone. Sites with context conducive to change in these areas predictably had high uptake, while sites with uniformly weak contextual elements had low uptake. Most sites presented a mixed picture, with contextual elements being strongly supportive of change in some areas and weak or moderate in others. In some cases, we found that sites with strong context in at least one area only needed to have adequate context in other areas to yield high uptake. At other sites, weak context in just one area had the potential to contribute to low uptake, despite countervailing strengths. Even a site with positive views of EBPs could not succeed when context was weak. Interrelationships among different contextual elements can act as barriers to uptake at some sites and as facilitators at others. Accounting for interconnections among elements enables PARIHS to more fully describe the determinants of successful implementation as they operate in real-world settings.

  20. A study of trace elements in the atmosphere of PINSTECH, Nilore

    International Nuclear Information System (INIS)

    Rusheed, A.; Ahmed, S.; Mannan, A.; Qureshi, I. H.

    1987-06-01

    Atmospheric aerosol particulates of inorganic elements are usually transported to long distances from their source of emmision. The measurement of these elements in air provides useful information for understanding aerosol effects. Therefore studies were undertaken to determine the atmospheric concentration of some inorganic elements, 23 air filter samples of 24 hour duration were collected at Nilore, Islamabad area and analysed for 16 elements by neutron activation analysis (NAA). The concentration of 9 elements were determined in more than 12 samples. Comparison of the average concentration of these elements with those observed at other sites in U.S.A and U.K., indicate a distribution pattern similar to a non-urban site with very little pollution from industerial sources. Binary collection coefficients were calculated using the data of 9 principal elements of identify particulate sources. Co, Cr, Cs, Eu, Fe, Sc and Rb were assigned a crustal source, whereas Sb could possible has an anthropogenic source. Zn was found to have a constant nearby source the exact nature of which could be ascertained after a complete analysis of local soil and other possible sources near the site. (orign./A.B.)

  1. A study on the bonding residual thermal stress analysis of dissimilar materials using boundary element method

    International Nuclear Information System (INIS)

    Yi, Won; Yu, Yeong Chul; Jeong, Eui Seob; Lee, Chang Ho

    1995-01-01

    It is very important to evaluate the bonding residual thermal stress in dissimilar materials such as LSI package. In this study, the bonding residual thermal stress was calculated using the boundary element method, varing with the sub-element, geometry of specimen and adhesive thickness. The present results reveal a stress singularity at the edge of the interface, therefore the bonding strength of metal/resin interface can be estimated by taking into account it.

  2. Solar power satellite rectenna design study: Directional receiving elements and parallel-series combining analysis

    Science.gov (United States)

    Gutmann, R. J.; Borrego, J. M.

    1978-01-01

    Rectenna conversion efficiencies (RF to dc) approximating 85 percent were demonstrated on a small scale, clearly indicating the feasibility and potential of efficiency of microwave power to dc. The overall cost estimates of the solar power satellite indicate that the baseline rectenna subsystem will be between 25 to 40 percent of the system cost. The directional receiving elements and element extensions were studied, along with power combining evaluation and evaluation extensions.

  3. Comparative study of the suitability of two lichen species for trace element atmospheric monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Saiki, Mitiko; Alves, Edson R.; Genezini, Frederico A., E-mail: mitiko@ipen.br, E-mail: eralves@ipen.br, E-mail: fredzini@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN-SP), Sao Paulo, SP (Brazil); Saldiva, Paulo H.N., E-mail: pepino@usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Faculdade de Medicina

    2013-07-01

    Lichens have been widely used in monitoring studies. Consequently, it is very useful to study the suitability of lichen species to monitor pollutants allowing in this way the best choice. The aim of this study was to compare the accumulation of trace elements by two epiphytic lichen species Canoparmelia texana (Tuck) Elix and Hale and Usnea amblyoclada (Mull. Arg.) Zahlbr. Five samples of each species were collected during the period from November 2010 in a same site far from downtown Sao Paulo city. Lichens collected from tree barks were cleaned, freeze-dried, ground and analyzed by neutron activation analysis. Aliquots of lichen samples and synthetic elemental standards were irradiated at the IEA-R1 nuclear research reactor. The induced gamma activities were measured using a hyperpure Ge detector coupled to a digital spectrum analyzer. Concentrations of As, Ba, Cd, Cr, Cs, Fe, Mg, Mn, Na, Rb, V and Zn were determined in both lichen species. The results demonstrated that both species can be used for evaluating air quality. The element concentrations showed difference between lichen species and also among their sampling periods. These differences may be attributed to the distinct mechanisms of element absorption by lichens as well as various other factors that affect their element accumulation. The comparative evaluation made calculating the ratios between C. texana species sample and that in Usnea amblyoclada for elemental concentrations indicated that, in general, foliose C. texana present similar or higher concentrations than those presented by fruticose Usnea. (author)

  4. Trace elemental correlation study in malignant and normal breast tissue by PIXE technique

    International Nuclear Information System (INIS)

    Raju, G.J. Naga; Sarita, P.; Kumar, M. Ravi; Murty, G.A.V. Ramana; Reddy, B. Seetharami; Lakshminarayana, S.; Vijayan, V.; Lakshmi, P.V.B. Rama; Gavarasana, Satyanarayana; Reddy, S. Bhuloka

    2006-01-01

    Particle induced X-ray emission technique was used to study the variations in trace elemental concentrations between normal and malignant human breast tissue specimens and to understand the effects of altered homeostasis of these elements in the etiology of breast cancer. A 3 MeV proton beam was used to excite the biological samples of normal and malignant breast tissues. The elements Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb and Sr were identified and their relative concentrations were estimated. Almost all the elements were found to be elevated (p < 0.05, Wilcoxon signed-ranks test) in the cancerous tissues when compared with normal tissues. The excess levels of trace elements observed in the cancerous breast tissues could either be a cause or a consequence of breast cancer. Regarding their role in the initiation or promotion of breast cancer, one possible interpretation is that the elevated levels of Cu, Fe and Cr could have led to the formation of free radicals or other reactive oxygen species (ROS) that adversely affect DNA thereby causing breast cancer, which is mainly attributed to genetic abnormalities. Moreover, since Cu and Fe are required for angiogenesis, elevated concentrations of these elements are likely to promote breast cancer by increasing the blood supply for tumor growth. On the other hand elevated concentrations of elements in breast cancer tissues might also be a consequence of the cancer. This can be understood in terms of the biochemical and histological differences between normal and cancerous breast tissues. Tumors, characterized by unregulated multiplication of cells, need an ever-increasing supply of essential nutrients including trace elements. This probably results in an increased vascularity of malignant tissues, which in turn leads to enhancement of elemental concentrations in tumors

  5. Dietary intakes of essential trace elements. Results from total diet studies supported by the IAEA

    International Nuclear Information System (INIS)

    Parr, R.M.; Iyengar, G.V.; Aras, N.K.

    2006-01-01

    The International Atomic Energy Agency (IAEA) has, for many years, supported research on human dietary intakes of trace elements taking advantage, for analysis, of the possibilities offered by nuclear techniques, particularly neutron activation analysis (NAA). This paper summarizes the results obtained from studies in more than 20 countries in which special emphasis was placed on the application of reliable methodologies (written protocols, special equipment, analytical quality control, etc.). Considerable variation was observed among dietary intakes of essential minor and trace elements though most elements showed a pattern of adequate nutrition in most countries. However, for some elements such as calcium, iodine, iron and zinc, the intakes in many countries were lower than the dietary requirements. (author)

  6. Theoretical study of fuel element reliability in the BRIG-300 fast reactor

    International Nuclear Information System (INIS)

    Kulikov, I.S.; Nesterenko, V.B.; Tverkovkin, B.E.

    1983-01-01

    The theoretical results on studies of the reliability of cermet symmetrically heated fuel elements under conditions of the BRIG-300 fast gas cooled reactor are presented. The investigations have been conducted at the Nuclear Power Engineering Institute of the Byelorussian Academy of Sciences. Two variants of the fuel elements are considered :the fuel element with the gas gap between fuel and can and the fuel element with tight contact between cermet fuel and can. The estimated data on can resistance, swelling of the fuel rods and cans, strains and stresses in cans, change of the gap and its thermal coductivity during the reactor operation are obtained. The results of the analysis show that cermet fuel has sufficient reliability upon oparational conditions of the reactor with dissociating gas coolant in a steady-state regime

  7. Study of the stress-strain state of compressed concrete elements with composite reinforcement

    Directory of Open Access Journals (Sweden)

    Bondarenko Yurii

    2017-01-01

    Full Text Available The efficiency analysis of the application of glass composite reinforcement in compressed concrete elements as a load-carrying component has been performed. The results of experimental studies of the deformation-strength characteristics of this reinforcement on compression and compressed concrete cylinders reinforced by this reinforcement are presented. The results of tests and mechanisms of sample destruction have been analyzed. The numerical analysis of the stress-strain state has been performed for axial compression of concrete elements with glasscomposite reinforcement. The influence of the reinforcement percentage on the stressed state of a concrete compressed element with the noted reinforcement is estimated. On the basis of the obtained results, it is established that the glass-composite reinforcement has positive effect on the strength of the compressed concrete elements. That is, when calculating the load-bearing capacity of such structures, the function of composite reinforcement on compression should not be neglected.

  8. Environmental pollution studies. Quantitative determination of elements in the air particulate matter by NAA

    International Nuclear Information System (INIS)

    Sutisna; Hidayat, Achmad; Muhayatun; Supriatna, Dadang

    2006-01-01

    Regarding to the 2002 PNCA Program for the Utilization of INAA in the Environmental Study, the elemental determination of air particulate matter have been done. Two sampling site were chosen to collect a PMs samples, i.e. Lembang and Bandung that represent the rural and the urban region respectively. The period of sampling was January 2002 to November 2002. Air sample was collect by GANT Stacked air sampler using 47 mm diameter cellulose filter which have a pore size of 0.45 μm and 8 μm for fine and coarse particle respectively. Quantitative elemental determination has been done using Instrumental Neutron Activation Analysis based on a comparative method. The elemental distributions on fine and coarse fraction of air particulate matter have been analyzed for both sampling sites as well as the enrichment factor (EF) for all elements interest. The result shows that the average annual concentrations of fine and coarse PMs in the Lembang sampling site were 7.8 μg.m -3 and 1.6 μg.m -3 respectively. Meanwhile at Bandung sampling site, the PMs are higher than that a Lembang sampling site, i.e. 14.4 μg.m -3 and 22.5 μg.m -3 for fine and coarse PMs respectively. The fine fraction was higher than the coarse fraction at Lembang sampling site, but at Bandung sampling site the fine fraction was lower than the coarse fraction. Fifteen elements of Na, Al, V, Mn, Br, I, Cl, Sc, Co, Fe, Cr, Zn, La, Sb and Sm were analyzed for both sampling site. Among those elements concerned, Na, Al, Br, Cl and Fe were major constituent elements in all fractions that have a concentration more than 40 ng.cm -3 . Generally, the concentration of elements determined in the urban sampling site was higher than that in the rural site. Al, V, Mn, Sc, Co and Fe are relatively higher in concentration in coarse fraction of urban site. Br element concentration was not significantly different for both sampling site. The EF values of most elements concerned are generally also higher for the fine fraction

  9. Studies on Elemental Contents of Some Biological and Environmental Materials Using Nuclear And Atomic Techniques

    International Nuclear Information System (INIS)

    Abd-El Aziz, W.M.M.

    2013-01-01

    study raises ethical and medical concerns about the implications of using eye-liners with high toxic elemental content in Egypt.

  10. Experimental Study of the Partitioning of Siderophile Elements in a Crystallizing Lunar Magma Ocean

    Science.gov (United States)

    Galenas, M.; Righter, K.; Danielson, L.; Pando, K.; Walker, R. J.

    2012-01-01

    The distributions of trace elements between the lunar interior and pristine crustal rocks were controlled by the composition of starting materials, lunar core formation, and crystallization of the lunar magma ocean (LMO) [1]. This study focuses on the partitioning of highly siderophile elements (HSE) including Re, Os, Ir, Ru, Pt, Rh, Pd and Au as well as the moderately siderophile elements Mo and W, and the lithophile elements of Hf and Sr. Our experiments also include Ga, which can be slightly siderophile, but is mostly considered to be chalcophile. Partitioning of these elements is not well known at the conditions of a crystallizing LMO. Previous studies of HSE partitioning in silicate systems have yielded highly variable results for differing oxygen fugacity (fO2) and pressure [2-4]. For example, under certain conditions Pt is compatible in clinopy-roxene [2] and Rh and Ru are compatible in olivine [3]. The silicate compositions used for these experiments were nominally basaltic. Ruthenium, Rh, and Pd are incompatible in plagioclase under these conditions[4]. However, this latter study was done at extremely oxidizing conditions and at atmospheric pressure, possibly limiting the applicability for consideration of conditions of a crystallizing LMO. In this study we address the effects of pressure and oxygen fugacity on the crystal/liquid partition coefficients of these trace elements. We are especially interested in the plagioclase/melt partition coefficients so that it may be possible to use reverse modeling to constrain the concentrations of these elements in the lunar mantle through their abundances in pristine crustal rocks.

  11. The effect of packaging elements on purchase intention: case study of Algerian customers

    Directory of Open Access Journals (Sweden)

    Sidi Mohammed Benachenhou

    2018-04-01

    Full Text Available The aim of this article is to study the impact of marketing innovation and the visual and verbal ele-ments of packaging on customers purchase intentions. After a brief literature review, an empirical study is conducted among 140 customers of Coca-Cola brand in Tlemcen city. To this end, a model of intention has been developed to be tested by structural equations modeling. The results of this study showed that marketing innovation and the visual and verbal elements of packaging directly affect the purchase intentions of the customers of this brand.

  12. A Study of the Renewal Cycle of Hotel Building Elements in Malaysia

    Directory of Open Access Journals (Sweden)

    Zhen Wei

    2014-01-01

    Full Text Available Penang is the main tourism island which appeals an increasing number of travellers each year. Therefore, the hotels in Penang play a crucial role in the field of Penang tourism. However, recently some problems with the Penang hotels have been brought to light frequently by travellers including domestic and foreign tourists. The reason for this may be due to irregular maintenance as well as the fact that the renewal of the building elements may not have been duly carried out. In light of that, this research investigated the condition of the maintenance and renewal cycle of the building elements of the hotels in Penang. This study was conducted with a quantitative method, using a questionnaire to collect information regarding the condition of maintenance, evaluation of the condition of the building elements and the frequency of building elements renewal. The results revealed that each building element renewal cycle is differing according to the effects of maintenance and its lifespan. In terms of comparison with the renewals in Singapore hotels, there are shortcomings involved in the schedule of element renewals carried out in Penang.

  13. A study of association between fingernail elements and osteoporosis by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Bahreini, Maryam; Hosseinimakarem, Zahra; Hassan Tavassoli, Seyed

    2012-09-01

    Laser induced breakdown spectroscopy (LIBS) is used to investigate the possible effect of osteoporosis on the elemental composition of fingernails. Also, the ability to classify healthy, osteopenic, and osteoporotic subjects based on their fingernail spectra has been examined. 46 atomic and ionic emission lines belonging to 13 elements, which are dominated by calcium and magnesium, have been identified. Measurements are carried out on fingernail clippings of 99 subjects including 27 healthy, 47 osteopenic, and 25 osteoporotic subjects. The Pearson correlations between spectral intensities of different elements of fingernail and age and bone mineral densities (BMDs) in nail samples are calculated. Correlations between line intensities of some elements such as sodium and potassium, calcium and iron, magnesium and silicon and also between some fingernail elements, BMD, and age are observed. Although some of these correlations are weak, some information about mineral metabolism can be deduced from them. Discrimination between nail samples of healthy, osteopenic, and osteoporotic subjects is shown to be somehow possible by a discriminant function analysis using 46 atomic emission lines of the LIBS spectra as input variables. The results of this study provide some evidences for association between osteoporosis and elemental composition of fingernails measured by LIBS.

  14. Straightened cervical lordosis causes stress concentration: a finite element model study

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Wei; Shi, Shiyuan; Fei, Jun; Wang, Yifan; Chen, Chunyue [Hangzhou Red Cross Hospital, Hangzhou, Zhejiang, (China); Liao, Shenhui [School of Information Science and Engineering, Central South University, Changsha, Hunan (China)

    2013-03-15

    In this study, we propose a finite element analysis of the complete cervical spine with straightened and normal physiological curvature by using a specially designed modelling system. An accurate finite element model is established to recommend plausible approaches to treatment of cervical spondylosis through the finite element analysis results. There are few reports of biomechanics influence of the straightened cervical curve. It is difficult to measure internal responses of cervical spine directly. However, the finite element method has been reported to have the capability to quantify both external and internal responses to mechanical loading, such as the strain and stress distribution of spinal components. We choose a subject with a straightened cervical spine from whom to collect the CT scan data, which formed the basis of the finite element analysis. By using a specially designed modelling system, a high quality finite element model of the complete cervical spine with straightened curvature was generated, which was then mapped to reconstruct a normal physiological curvature model by a volumetric mesh deformation method based on discrete differential properties. Then, the same boundary conditions were applied to do a comparison. The result demonstrated that the active movement range of straightened cervical spine decreased by 24–33 %, but the stress increased by 5–95 %. The stress was concentrated at the facet joint cartilage, uncovertebral joint and the disk. The results suggest that cervical lordosis may have a direct impact on cervical spondylosis treatment. These results may be useful for clinical treatment of cervical spondylosis with straightened curvature.

  15. Straightened cervical lordosis causes stress concentration: a finite element model study

    International Nuclear Information System (INIS)

    Wei, Wei; Shi, Shiyuan; Fei, Jun; Wang, Yifan; Chen, Chunyue; Liao, Shenhui

    2013-01-01

    In this study, we propose a finite element analysis of the complete cervical spine with straightened and normal physiological curvature by using a specially designed modelling system. An accurate finite element model is established to recommend plausible approaches to treatment of cervical spondylosis through the finite element analysis results. There are few reports of biomechanics influence of the straightened cervical curve. It is difficult to measure internal responses of cervical spine directly. However, the finite element method has been reported to have the capability to quantify both external and internal responses to mechanical loading, such as the strain and stress distribution of spinal components. We choose a subject with a straightened cervical spine from whom to collect the CT scan data, which formed the basis of the finite element analysis. By using a specially designed modelling system, a high quality finite element model of the complete cervical spine with straightened curvature was generated, which was then mapped to reconstruct a normal physiological curvature model by a volumetric mesh deformation method based on discrete differential properties. Then, the same boundary conditions were applied to do a comparison. The result demonstrated that the active movement range of straightened cervical spine decreased by 24–33 %, but the stress increased by 5–95 %. The stress was concentrated at the facet joint cartilage, uncovertebral joint and the disk. The results suggest that cervical lordosis may have a direct impact on cervical spondylosis treatment. These results may be useful for clinical treatment of cervical spondylosis with straightened curvature.

  16. Studies of trace element imbalances in Alzheimer's disease using sequential NAA

    International Nuclear Information System (INIS)

    Ehmann, W.D.; Markesbery, W.R.; Thompson, C.M.; Vance, D.E.; Mao, Y.

    1986-01-01

    Evidence has accumulated in the literature that trace elements may be implicated in the etiology of Alzheimer's disease (AD) and other age-related neurological diseases. Even if elemental imbalances do not prove to be causative factors, observed perturbations may be markers that could aid in diagnosis, or help elucidate pathological processes. In this paper the authors present new data for trace element levels in three areas of the human brain most severely affected by AD (hippocampus, amygdala, and nucleus basalis) and in AD hair and nail samples. In some cases the specific imbalances seen previously in the bulk brain analyses are amplified in these regions. Elevated bromine levels seen in AD brain are also observed in AD hair and nail. Significant alkali metal and mercury imbalances with respect to controls occur in AD nail samples. The role of these trace element alterations in the etiology of AD has still not been determined. However, some possible physiological effects include: membrane dysfunction (alkali metals), enzyme inhibition (mercury and bromine), and interference with neurotransmitter functions (mercury, bromine, and alkali metals). The simultaneous multielement capability of this sequential NAA procedure also permits interelement correlation studies. Elemental associations may help identify potential environmental factors that could contribute to the observed trace element imbalances

  17. An Atomistic Modeling Study of Alloying Element Impurity Element, and Transmutation Products on the cohesion of A Nickel E5 {001} Twist Grain Boundary

    International Nuclear Information System (INIS)

    Young, G.A. Jr.; Najafabadi, R.; Strohmayer, W.; Baldrey, D.G.; Hamm, B.; Harris, J.; Sticht, J.; Wimmer, E.

    2003-01-01

    Atomistic modeling methods were employed to investigate the effects of impurity elements on the metallurgy, irradiation embrittlement, and environmentally assisted cracking of nickel-base alloys exposed to nuclear environments. Calculations were performed via ab initio atomistic modeling methods to ensure the accuracy and reliability of the results. A Griffith-type fracture criterion was used to quantitatively assess the effect of elements or element pairs on the grain boundary cohesive strength. In order of most embrittling to most strengthening, the elements are ranked as: He, Li, S, H, C, Zr, P, Fe, Mn, Nb, Cr, and B. Helium is strongly embrittling (-2.04 eV/atom lowering of the Griffith energy), phosphorus has little effect on the grain boundary (0.1 eV/atom), and boron offers appreciable strengthening (1.03 eV/atom increase in the Griffith energy). Calculations for pairs of elements (H-Li, H-B, H-C, H-P, and H-S) show little interaction on the grain boundary cohesive energy, so that for the conditions studied, linear superposition of elemental effects is a good approximation. These calculations help explain metallurgical effects (e.g. why boron can strengthen grain boundaries), irradiation embrittlement (e.g. how boron transmutation results in grain boundary embrittlement), as well as how grain boundary impurity elements can affect environmentally assisted cracking (i.e. low temperature crack propagation and stress corrosion cracking) of nickel-base alloys

  18. A study on the radiometric method for evaluating element migration from plastic packagings to its contents

    International Nuclear Information System (INIS)

    Soares, Eufemia Paez

    2008-01-01

    Over the past few years, problems related to food contamination by substances or elements that can be a risk to human health have became a concern, not only to government authorities, but to the general population as well. Within this context, plastic packaging can constitute a source of food contamination since plastic manufacturing processes involve the use of catalysts and different types of additives that may contain toxic elements. When food comes into contact with this packaging, components of the package may migrate to the food. In order to control the material used as food packaging, the National Health Surveillance Agency (ANVISA) in Brazil, has established boundary values of migrant substances and procedures to determine migration from plastic packagings to food. In this study the radiometric method was evaluated for element migration determination from plastic packaging to food simulating or to the food itself. This radiometric method consisted in irradiating plastic packaging samples with a thermal neutron flux from the IEA-R1 nuclear research reactor in order to produce radionuclides of elements present in the packagings. The irradiated plastic was then exposed to food simulant or food for element migration. Gamma ray spectrometry was used to measure radioactivity in the simulant or food in order to quantify the migration. The food simulating types and experimental conditions were established according to the ANVISA regulations. Element migration was studied for plastic packaging used for soft drinks, drinking water, milk, dairy products, juices and fatty foods. In the instrumental neutron activation analysis of these packagings the presence of As, Cd, Cr, Co and Sb II was verified. Results obtained from the migration experiments by the radiometric method indicated that Cd, Co, Cr and Sb present in these plastics migrated to the simulant or to the food. In some packagings, the migration of only some of these elements was observed. In these cases the

  19. Quality-assurance study of the special - purpose finite-element program - SPECTROM: I. Thermal, thermoelastic, and viscoelastic problems

    International Nuclear Information System (INIS)

    Wagner, R.A.

    1980-12-01

    This comparison study involves a preliminary verification of finite element calculations. The methodology of the comparison study consists of solving four example problems with both the SPECTROM finite element program and the MARC-CDC general purpose finite element program. The results show close agreement for all example problems

  20. A study of essential elements in ancient Thai fighting swords by chemical and nuclear techniques

    International Nuclear Information System (INIS)

    Janposri, K.

    1980-01-01

    Four ancient Thai fighting swords from the Bangkok National Museum and iron ore from Kao Tab Kwai, Lopburi were studied by neutron activation analysis, metallography and chemical analysis. The results of these scientific studies show that all of these four swords are made of plain carbon steel, containing trace elements which have no effect on the physical and mechanical properties of the steel. The trace elements which were found in the iron ore are quite similar to those found in one of these swords. This means that the iron in one of the swords may have come from ore found at Kao Tab Kwai, Lopburi

  1. Studies in Bangladesh on ingestion and organ content of trace elements of importance in radiological protection

    International Nuclear Information System (INIS)

    Begum, M.; Miah, M.F.K.

    1998-01-01

    In order to characterize a Reference Asian Man for radiation protection a study on the ingestion and organ content of trace elements of importance in radiological protection has been taken up by the IAEA/RCA among the Asian Countries. Representative sampling sample collection, appropriate techniques for analysis, quality assurance etc. for the study of this project are important parameters for accurate measurements. Some elemental composition in drinking supply water (Tap water and ground water) in the Dhaka city in Bangladesh has been presented in this paper. (author)

  2. Element budgets of forest biomass combustion and ash fertilisation - a Danish case-study

    DEFF Research Database (Denmark)

    Ingerslev, Morten; Skov, Simon; Sevel, Lisbeth

    2011-01-01

    Harvest of forest biomass for energy production may lead to a significant export of nutrients from the forest. Ash spreading and recycling of nutrients from wood chip combustion to the forest has come into focus as a means for counteracting the nutrient export. This study was carried out to examine...... the retention of various elements in the different ash fractions and utilise the nutrient recovery to evaluate the fertiliser quality of the examined ash. The mass and element flux of wood chips, bottom ash, cyclone fly ash and condensation sludge at Ebeltoft central heating plant was studied over a four day...

  3. Preparation Technology and Study of Properties of New Detectors for Transuranium Elements

    International Nuclear Information System (INIS)

    Andrushchenko, G.Yu.; Blank, A.B.; Budakovsky, S.V.; Zelenska, O.V.; Shevtsov, M.I.

    2006-01-01

    A porous composite materials is described for determination of radionuclides in aquatic objects of the environment. Possibilities have been studied for the use of this material in monitoring of α-nuclides content in natural waters. The composite is a scintillator with through pores, the surface of which is impregnated by a sorbent that is selective with respect to transuranium elements. The structure of the material allows combination of two processes - concentrating the radionuclide and measuring its activity. as selective sorbent to transuranium elements an anion-exchange resin VP-1Ap was used. Studies of material functionality were carried out using the model systems based on reference radioactive solutions 239 Pu

  4. Study of the physico-chemical behavior of transuranian elements in radioactive waste repositories

    International Nuclear Information System (INIS)

    Vitorge, P.; Billon, A.; Dautel, C.; Michau, O.; Quevrin, M.; Delorme, P.; Berthoud, T.; Mauchien, P.

    1986-01-01

    Transuranian chemistry is being studied in the geochemical context of the geological disposal of radioactive waste. The transuranians considered are plutonium, neptunium and americium. The first part, devoted to the chemistry of these elements in aqueous solutions, consists of a critical compilation of literature data with a view to resulting in producing the E h -pH diagrams of transuranians in a complexing environment. The study of the retention by constituents of artificial clay barriers (bentonite and attapulgite) is the subject of the second part. The third part concerns the development of a measurement technique for transuranian elements at trace levels by the thermal lensing method

  5. Distribution of 35 Elements in Peat Cores from Ombrotrophic Bogs Studied by Epithermal Neutron Activation Analysis

    CERN Document Server

    Frontasyeva, M V

    2004-01-01

    In ombrotrophic bogs the surface peat layer is supplied with chemical substances only from the atmosphere. Peat cores from these bogs therefore can be used to study temporal trends in atmospheric deposition of pollutants. In this work epithermal neutron activation analysis was applied for the first time to study the distribution of 35 elements in peat profiles from ombrotrophic bogs. The selected examples were from Finnmark county in northern Norway: one pristine site far from any local pollution source, and another strongly affected by long-term operation of Russian copper-nickel smelters located close to the border. The elements are classified with respect to their behavior in the uppermost 40 cm of the peat, and similarities and differences between the two profiles are discussed. As compared with other more commonly used analytical techniques based on acid decomposition of the sample ENAA has the advantage of providing the total concentrations of the elements.

  6. Study of osteoporosis through the measurement of bone mineral density and trace elements

    International Nuclear Information System (INIS)

    Aras, N.K.; Yilmaz, G.; Alkanl, S.; Korkusuz, F.; Ungan, M.; Kuscu, L.; Laleli, Y.; Eksioglu, F.; Sepici, B.; Gunel, U.

    2000-01-01

    The main purpose of this study was to establish a relation, if any, between bone mineral density, BMD, of the healthy Turkish population of the ages between 15 and 50 with social and demographic information, family history of fractures, personal and inherited characteristic, smoking and alcohol habit, history of fertility, level of physical activity, food consumption especially trace elements and other variables. Most of these relations were discussed in the last RCM in San Diego, CA, October 7-10,1996. Since then we have concentrated our work on more BMD and trace element measurements in bone. To this end, bone mineral density measurements, trace element studies, neutron activation analysis, fluoride analysis and atomic absorption analysis were undertaken and resulting data were analysed

  7. Model study of acid rain effect on adsorption of trace elements on soils using a multitracer

    International Nuclear Information System (INIS)

    Wang, H.F.; Ambe, S.; Takematsu, N.; Ambe, F.

    1998-01-01

    Using a radioactive multitracer and model acid rain (HCl or H 2 SO 4 solution), batch experiments were performed to examine the pH effect on the adsorption-desorption equilibrium of 16 elements on soils as a model study of an acid rain effect. Kaolin, black soil (original and with organic matter almost removed) and Kureha soil (original and with organic matter almost removed) were used as adsorbents. Characteristic dependence on the pH value of the suspension was observed for the adsorption of the elements on kaolin and the soils. The results of this model study indicate that acid rain decreases the retention of cations, while it increases or does not change the adsorption of anions on soils. Organic matter in soils has a positive effect on the extent of adsorption of most elements investigated. (author)

  8. Fundamental study on the extraction of transuranium elements from high-level liquid waste

    International Nuclear Information System (INIS)

    Kubota, Masumitsu; Morita, Yasuji; Tochiyama, Osamu; Inoue, Yasushi.

    1988-01-01

    A great many extractants have been studied for the separation of transuranium elements. The present study deals with the survey and classification of the extractants appearing in literature, bearing in mind the relationship between the molecular structure of extractants and their extractability for the transuranium elements from the standpoint of their selective separation from high-level liquid waste (HLW) generated from fuel reprocessing. The extractants surveyed were classified into six groups; unidentate neutral organophosphorus compounds, bidentate neutral organophosphorus compounds, acidic organophosphorus compounds, amines and ammonium salts, N,N-disubstituted amides and the other compounds. These extractants are not always applicable to the separation of transuranium elements from HLW because of their limitations in extractability and radiation durability. Only a limited number of extractants belonging to the bidentate neutral organophosphorus compounds and the acidic organophosphorus compounds are considered to be suitable for the present purpose. (author)

  9. Transuranium element behavior in the environment: What speciation studies can tell us

    International Nuclear Information System (INIS)

    Cleveland, J.M.

    1989-01-01

    Some of the transuranium elements - especially plutonium - can exist in the environment in several different oxidation states which differ chemically from one another as much as if they were different elements. Hence an understanding of the environmental chemistry of these elements requires knowledge of their oxidation-state distribution, or speciation, under a variety of realistic conditions. Such studies are in their infancy, but already several chemical speciation methods have yielded results indicating the uniqueness of transuranic environment chemistry; for example, dioxoplutonium(V), which is unstable in the acid solutions employed in laboratory and processing plant, is often the most prevalent plutonium oxidation state in natural waters. More sensitive and less invasive physical speciation methods under development will hopefully permit the extension of these studies to a wider variety of environmental conditions and to determinations of sorbed species necessary for an understanding of sorption processes

  10. Preliminary studies on trace element contamination in dumping sites of municipal wastes in India and Vietnam

    Science.gov (United States)

    Agusa, T.; Kunito, T.; Nakashima, E.; Minh, T. B.; Tanabe, S.; Subramanian, A.; Viet, P. H.

    2003-05-01

    The disposal of wastes in dumping sites has increasingly caused concem about adverse health effects on the populations living nearby. However, no investigation has been conducted yet on contamination in dumping sites of municipal wastes in Asian developing countries. In this study, concentrations of 11 trace elements (V, Cr, Mn, Co, Cu, Zn, Mo, Ag, Cd, Sb and Pb) were detennined in scalp hair from the population living nearby and in soil from dumping sites and control sites of India and Vietnam. Soil samples in dumping site in India showed significantly higher concentrations of some trace elements than soils in control site, whereas this trend was not notable in Vietnam. This is probably due to the fact that the wastes were covered with the soil in the dumping site of Vietnam. Cadmium concentrations in some hair samples of people living near dumping site in India and Vietnam exceeded the level associated with learning disorder in children. Levels of most of the trace elements in hair were significantly higher in dumping site than those in control site in India and Vietnam, suggesting direct or indirect exposure to those elements from dumping wastes. To our knowledge, this is the first study of trace element contamination in dumping sites in India and Vietnam.

  11. A study on temporal variation of elemental composition in tree barks used as air pollution indicators

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Eliane C.; Saiki, Mitiko, E-mail: eliane_csantos@yahoo.com.br, E-mail: mitiko@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The study of air pollution using biological matrices has shown that tree barks may be used as biomonitor due to accumulation of aerosol particles on its porous surface. The bark elemental composition can provide information on pollution sources as well as characterize the aerial pollutants from a wide geographical region. The aim of this study was to investigate the variation in elemental composition in barks with time of exposure. Tree barks from Tipuana (Tipuana tipu) and Sibipiruna (Caesalpinia peltophoroides) species were collected in February 2013 and July 2014 in the city of São Paulo. For analysis, the barks were cleaned, grated, ground and analyzed by neutron activation analysis (NAA). Aliquots of samples and synthetic standards of elements were irradiated with thermal neutron flux at the IEA-R1 nuclear research reactor and after a suitable decay time, the induced gamma activities were analyzed by gamma spectrometry. The elements As, Br, Ca, Co, Cr, Cs, Fe, K, La, Rb, Sb, Sc and Zn were determined and the results indicated variability in the concentrations depending on the element, sampling period and also on tree species, indicating that there are not very well defined temporal trends. The quality control of the analytical results evaluated by analyzing INCT Virginia Tobacco Leaves certified reference material (CRM) presented values of |z-score| < 2, indicating that the procedure of NAA applied is suitable for the analyses. (author)

  12. A study on temporal variation of elemental composition in tree barks used as air pollution indicators

    International Nuclear Information System (INIS)

    Santos, Eliane C.; Saiki, Mitiko

    2015-01-01

    The study of air pollution using biological matrices has shown that tree barks may be used as biomonitor due to accumulation of aerosol particles on its porous surface. The bark elemental composition can provide information on pollution sources as well as characterize the aerial pollutants from a wide geographical region. The aim of this study was to investigate the variation in elemental composition in barks with time of exposure. Tree barks from Tipuana (Tipuana tipu) and Sibipiruna (Caesalpinia peltophoroides) species were collected in February 2013 and July 2014 in the city of São Paulo. For analysis, the barks were cleaned, grated, ground and analyzed by neutron activation analysis (NAA). Aliquots of samples and synthetic standards of elements were irradiated with thermal neutron flux at the IEA-R1 nuclear research reactor and after a suitable decay time, the induced gamma activities were analyzed by gamma spectrometry. The elements As, Br, Ca, Co, Cr, Cs, Fe, K, La, Rb, Sb, Sc and Zn were determined and the results indicated variability in the concentrations depending on the element, sampling period and also on tree species, indicating that there are not very well defined temporal trends. The quality control of the analytical results evaluated by analyzing INCT Virginia Tobacco Leaves certified reference material (CRM) presented values of |z-score| < 2, indicating that the procedure of NAA applied is suitable for the analyses. (author)

  13. Medical student use of communication elements and association with patient satisfaction: a prospective observational pilot study.

    Science.gov (United States)

    Turner, Joseph S; Pettit, Katie E; Buente, Bryce B; Humbert, Aloysius J; Perkins, Anthony J; Kline, Jeffrey A

    2016-05-21

    Effective communication with patients impacts clinical outcome and patient satisfaction. We measure the rate at which medical students use six targeted communication elements with patients and association of element use with patient satisfaction. Participants included fourth year medical students enrolled in an emergency medicine clerkship. A trained observer measured use of six communication elements: acknowledging the patient by name, introducing themselves by name, identifying their role, explaining the care plan, explaining that multiple providers would see the patient, and providing an estimated duration of time in the emergency department. The observer then conducted a survey of patient satisfaction with the medical student encounter. A total of 246 encounters were documented among forty medical student participants. For the six communication elements evaluated, in 61% of encounters medical students acknowledged the patient, in 91% they introduced themselves, in 58 % they identified their role as a student, in 64% they explained the care plan, in 80% they explained that another provider would see the patient, and in only 6% they provided an estimated duration of care. Only 1 encounter (0.4%) contained all six elements. Patients' likelihood to refer a loved one to that ED was increased when students acknowledged the patient and described that other providers would be involved in patient care (P = 0.016 and 0.015 respectively, Chi Square). Likewise, patients' likelihood to return to the ED was increased when students described their role in patient care (P = 0.035, Chi Square). This pilot study demonstrates that medical students infrequently use all targeted communication elements. When they did use certain elements, patient satisfaction increased. These data imply potential benefit to additional training for students in patient communication.

  14. Uptake of Elements From Aerosols by Humans ~ A Case Study From Delhi & Bangalore Cities

    Science.gov (United States)

    Anand, S.; Yadav, S.; Jain, V. K.

    2006-05-01

    Aerosol research has gained tremendous importance globally due to the cumulative effects of increasing industrialization and urbanization on aerosol production which can have an alarming impact on the climate of the planet as well as the health of its inhabitants. Therefore, there is an increasing need to study aerosols for all of their physicochemical and biological aspects on both local and global scales. World over extensive research has gone into studying the physical and the chemical aspects of aerosols. However, little information is yet available on the health impacts of aerosols particularly in the Asian context. Here we report uptake of various elements that are concentrated in aerosols by the human body in Delhi and Bangalore cities and their possible health effects. In many urban areas, for example in Delhi, inhalable fractions of aerosols are known to have high concentrations of elements such as Cu, Zn, Pb, Ba, Ni and Cr (Yadav and Rajamani 2004). Also aerosols in the North West part of India seem to be particularly enriched in these elements. If so, there is a high possibility of these elements getting into the human system either directly or indirectly through water and food. To determine the concentrations of these elements that are present in significant concentrations in the inhalable fractions of aerosols, human hair and blood samples are used as proxies. Both these regions have contrasting geographic and climatic conditions. Delhi (altitude : 213-305m above MSL) located on the fringes of the Thar desert which supplies considerable amount of dust, is semi-arid with annual rainfall of 60-80 cms & temperatures varying between 1° - 45°. Bangalore (altitude of 900m above MSL) receives a high annual rainfall of 80-100 cms and being located on the fringes of tropical forests of the Sahyadri Mountains (Western Ghats) receives little crustal contribution to the aerosols. Samples from least polluted mountainous areas of Himalayas (Gangothri) and Sahyadri

  15. A study on chemical element determinations in human nails by neutron activation analysis

    International Nuclear Information System (INIS)

    Sanches, Thalita Pinheiro; Saiki, Mitiko

    2013-01-01

    Nail analyses have been the object of study in order to assess the levels of elements accumulated in the human organism and to use this tissue to monitor environmental and occupational exposure, to evaluate the nutritional status, to verify intoxication by toxic metals and to diagnose or to prevent diseases. Nail analyses present advantages due to easy sample collection, storage, transportation and this tissue provides element level accumulation over time. However, there is controversy regarding the application of nail analysis data due to difficulties to establish reliable reference values or element concentration ranges as control values. The objective of this study was to evaluate the factors that can affect nail element concentrations for further sample analyses of a group of individuals by applying neutron activation analysis (NAA). Fingernails and toenails collected from adult individuals of both genders, aged 18 to 71 years, living in the Sao Paulo Metropolitan Region were cut in small fragments, cleaned and dried for analyses. Samples and element standards were irradiated for 16 h under a thermal neutron flux of about 4.5 x 10 12 n cm -2 s -1 at the IEA-R1 nuclear research reactor followed by gamma ray spectrometry. Element concentrations for As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se and Zn were determined. For quality control of the analytical results, certified reference materials were analysed and the results showed good accuracy and precision with relative errors and relative standard deviations lower than 5.1 % and 11.6 %, respectively. Preliminary assays indicated that the contribution due to impurities from plastic involucres used in the irradiation as well as those from nail polishes is very low and could be considered negligible. Results from the nail sample cleaning process using distinct procedures indicated that HNO 3 solution may cause sample dissolution. Sample homogeneity was verified by analysis of a sample in replicate. A

  16. A study on chemical element determinations in human nails by neutron activation analysis

    International Nuclear Information System (INIS)

    Sanches, Thalita Pinheiro

    2012-01-01

    Nail analyses have been the object of study in order to assess the levels of elements accumulated in the human organism and to use this tissue to monitor environmental and occupational exposure, to evaluate the nutritional status, to verify intoxication by toxic metals and to diagnose or to prevent diseases. Nail analyses present advantages due to easy sample collection, storage, transportation and this tissue provides element level accumulation over time. However, there is controversy regarding the application of nail analysis data due to difficulties to establish reliable reference values or element concentration ranges as control values. The objective of this study was to evaluate the factors that can affect nail element concentrations for further sample analyses of a group of individuals by applying neutron activation analysis (NAA). Fingernails and toenails collected from adult individuals of both genders, aged 18 to 71 years, living in the Sao Paulo Metropolitan Region were cut in small fragments, cleaned and dried for analyses. Samples and element standards were irradiated for 16 h under a thermal neutron flux of about 4.5 x 10 12 n cm -2 s -1 at the IEA-R1 nuclear research reactor followed by gamma ray spectrometry. Element concentrations for As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se and Zn were determined. For quality control of the analytical results, certified reference materials were analysed and the results showed good accuracy and precision with relative errors and relative standard deviations lower than 5.1 % and 11.6 %, respectively. Preliminary assays indicated that the contribution due to impurities from plastic involucres used in the irradiation as well as those from nail polishes is very low and could be considered negligible. Results from the nail sample cleaning process using distinct procedures indicated that HNO 3 solution may cause sample dissolution. Sample homogeneity was verified by analysis of a sample in replicate. A

  17. A study on chemical element determinations in human nails by neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sanches, Thalita Pinheiro; Saiki, Mitiko, E-mail: thalitapsanches@usp.br, E-mail: mitiko@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Nail analyses have been the object of study in order to assess the levels of elements accumulated in the human organism and to use this tissue to monitor environmental and occupational exposure, to evaluate the nutritional status, to verify intoxication by toxic metals and to diagnose or to prevent diseases. Nail analyses present advantages due to easy sample collection, storage, transportation and this tissue provides element level accumulation over time. However, there is controversy regarding the application of nail analysis data due to difficulties to establish reliable reference values or element concentration ranges as control values. The objective of this study was to evaluate the factors that can affect nail element concentrations for further sample analyses of a group of individuals by applying neutron activation analysis (NAA). Fingernails and toenails collected from adult individuals of both genders, aged 18 to 71 years, living in the Sao Paulo Metropolitan Region were cut in small fragments, cleaned and dried for analyses. Samples and element standards were irradiated for 16 h under a thermal neutron flux of about 4.5 x 10{sup 12} n cm{sup -2} s{sup -1} at the IEA-R1 nuclear research reactor followed by gamma ray spectrometry. Element concentrations for As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se and Zn were determined. For quality control of the analytical results, certified reference materials were analysed and the results showed good accuracy and precision with relative errors and relative standard deviations lower than 5.1 % and 11.6 %, respectively. Preliminary assays indicated that the contribution due to impurities from plastic involucres used in the irradiation as well as those from nail polishes is very low and could be considered negligible. Results from the nail sample cleaning process using distinct procedures indicated that HNO{sub 3} solution may cause sample dissolution. Sample homogeneity was verified by analysis of a sample in

  18. Study of the Matrix Effect on the Plasma Characterization of Heavy Elements in Soil Sediments

    Directory of Open Access Journals (Sweden)

    Tawfik W.

    2007-01-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS has been applied to perform a study of the matrix effect on the plasma characterization of soil sediment targets. The plasma is generated by focusing a pulsed Nd: YAG laser on the target in air at atmospheric pressure. The plasma emission spectrum was detected using a portable Echelle spectrometer (Mechelle 7500 — Multichannel Instruments, Stockholm, Sweden with intensified CCD camera. Spectroscopic analysis of plasma evolution of laser produced plasmas has been characterized in terms of their spectra, and electron temperature. Four heavy elements V, Pb, Mn and Co were determined in the obtained spectra. The LTE and optically thin plasma conditions were verified for the produced plasma. The electron temperature and density were determined using the emission intensity and stark broadening, respectively, of the spectral lines of the heavy elements in the soil sediments. The electron temperature does not change with concentration. For environmental applications, the obtained results showed the capability of the proposed LIBS setup with the portable Mechelle 7500 spectrometer to be applied in-situ for real-time measurements of the variation of the matrix elemental composition of soil sediments by following up only a single element as a marker for the composition of the soil sediment without need of analysis of the other elements.

  19. A Study of the Temperature Distribution in UO{sub 2} Reactor Fuel Elements

    Energy Technology Data Exchange (ETDEWEB)

    Devold, I

    1968-05-15

    Thermal conductivity is one of the most important properties of nuclear reactor fuels. Accurate knowledge of this property is vital because, among other things, it determines the maximum power that can be taken out of the fuel element per unit length of the material without exceeding the safety limits of the fuel elements. This report consists of a study of the thermal behaviour of uranium dioxide in the form of reactor fuel. The experimental part of the report describes measurements performed at the OECD Halden Reactor Project, Halden, Norway. The experiment was originally set up in order to measure the temperature at the center of a UO{sub 2} fuel element as a function of element power, in order to determine the safe operation limit of the fuel assembly. However, in analysing the data obtained, very interesting thermal conductivity values were obtained and comparison with existing correlations could be performed. This comparison shows that a certain agreement is obtained between the measured data at Halden and a theory published by J.L. Bates in 1961, which predicts an increase in the thermal conductivity above 1500 deg C. The data obtained below 1300 deg C are also in good agreement with measurements performed by Vogt, Grandell and Runfors in 1964. The report contains a mathematical description of the heat transfer mechanisms in cylindrical fuel elements. The model is coded in FORTRAN IV-code and referred to as FUELTEMP.

  20. Atmospheric deposition of trace elements in Norway studied by means of moss analysis

    International Nuclear Information System (INIS)

    Steinnes, E.

    1977-02-01

    The atmospheric deposition of 28 elements in different parts of Norway was studied by means of moss analysis. The species Hylocomium splendens was selected after a comparison of different species. For several elements large regional differences were found. The highest concentration of these elements were found in the southernmost part of the country and in places near the west coast with high annual precipitation. The lowest values were found in places with low annual precipitation in Eastern Norway and the interior parts of the more northerly parts of the country. Within each region the highest deposition was observed in places with high annual precipitation. For the elements Pb, Sb, As, and Se the observed concentration range amounted to a factor of about 20. In the case of Ag, Cd, Cs, and V the range was smaller, but still amounting to a factor of 10 or more. A lower but still distinct spread was observed for Cr, Mo, Cu, and Zn. For all these elements long distance transport from sources in the densely populated and heavily industrialized parts of Europe probably are of importance for the obsreved distribution. (Auth.)

  1. A Study of the Temperature Distribution in UO2 Reactor Fuel Elements

    International Nuclear Information System (INIS)

    Devold, I.

    1968-05-01

    Thermal conductivity is one of the most important properties of nuclear reactor fuels. Accurate knowledge of this property is vital because, among other things, it determines the maximum power that can be taken out of the fuel element per unit length of the material without exceeding the safety limits of the fuel elements. This report consists of a study of the thermal behaviour of uranium dioxide in the form of reactor fuel. The experimental part of the report describes measurements performed at the OECD Halden Reactor Project, Halden, Norway. The experiment was originally set up in order to measure the temperature at the center of a UO 2 fuel element as a function of element power, in order to determine the safe operation limit of the fuel assembly. However, in analysing the data obtained, very interesting thermal conductivity values were obtained and comparison with existing correlations could be performed. This comparison shows that a certain agreement is obtained between the measured data at Halden and a theory published by J.L. Bates in 1961, which predicts an increase in the thermal conductivity above 1500 deg C. The data obtained below 1300 deg C are also in good agreement with measurements performed by Vogt, Grandell and Runfors in 1964. The report contains a mathematical description of the heat transfer mechanisms in cylindrical fuel elements. The model is coded in FORTRAN IV-code and referred to as FUELTEMP

  2. Nerva Fuel Element Development Program Summary Report - July 1966 through June 1972 Extrusion Studies

    Energy Technology Data Exchange (ETDEWEB)

    Napier, J. M.

    1973-09-21

    This part of the completion report pertaining to the NERVA graphite fuel element program covers data collected during the extrusion studies. The physical properties of the fuel element reached the following values: coefficient of thermal expansion (CTE) - 7.0 x 10-6/o C (25 - l,OOOo C); modulus of elasticity - 1.5 x lo6 psi; flexural strength - - 8,000 psi; ultimate strain to failure - 5,500 pidin; good thermal stress resistance. Matrices were produced which could be vapor coated with crack-free films of zirconium carbide. The CTE of the matrix was almost equal to the CTE of the zirconium carbide coating.

  3. Study of osteoporosis through the measurement of bone mineral density and trace elements

    International Nuclear Information System (INIS)

    Aras, N.K.; Yilmaz, G.; Alkan, S.; Korkusuz, F.; Ungan, M.; Kuscu, L.; Laleli, Y.; Eksioglu, F.; Sepici, B.

    2002-01-01

    The main purpose of this study was to establish a relation, if any, between bone mineral density (BMD) of the healthy Turkish population of the ages between 15 and 50 with social and demographic information, family history of fractures, personal and inherited characteristic, smoking and alcohol habit, history of fertility, level of physical activity, food consumption especially trace elements and other variables. Most of these relations were discussed in the last two Research Coordinated Meetings, in San Diego, CA, October 1996 and Sao Paulo, Brazil, August 1998. Since then we have concentrated our work on more BMD and trace element measurements in bone

  4. Studies to single subassembly flow monitoring with a complete 7 element array under sodium

    International Nuclear Information System (INIS)

    Hess, B.; Ruppert, E.; Stehle, H.; Vinzens, K.

    1975-01-01

    As part of the SNR-300 R and D programme a complete clamped array, consisting of 4 full size fuel elements and 3 blanket elements was tested for more than 4000 hours at 600 deg C in the AKB sodium loop at Interatom, Bensberg. The test was split into two phases and the total cluster was prestrained in the second phase to simulate 15 mm subassembly displacement at the level of the upper bearing pads. Although this test was mainly considered as an endurance test to demonstrate the integrity of prestrained core elements, efforts were made to study the feasibility of single subassembly flow monitoring with this full size model of a core section. The results of these investigations are presented and discussed in this paper

  5. A neutron activation study of trace element contents in plants growing on soils of different acidity

    International Nuclear Information System (INIS)

    Caplan, J.; Loebersli, E.; Steinnes, E.; Naeumann, R.

    1987-01-01

    As a part of a research program on the influence of soil acidification on metal uptake in plants, the present work was carried out in order to investigate the feasibility of instrumental neutron activation analysis for this purpose. The work was restricted to elements yielding medium- or long-lived radionuclides on neutron activation. Elements studied include Na, Sc, Cr, Fe, Co, Zn, Br, Rb, Cs, Ba and La. The material analyzed was from a comparison of trace element contents in natural vegetation from corresponding coniferous forest locations in South Norway, which is considerably exposed to acidic deposition from long-range atmospheric transport, and Central Norway, which is far less affected. In particular, Rb and Cs show pronounced differences between the two regions regarding concentration levels in certain plant species. (author) 8 refs.; 4 figs

  6. A neutron activation study of trace element contents in plants growing on soils of different acidity

    International Nuclear Information System (INIS)

    Caplan, J.; Loebersli, E.; Naeumann, R.; Steinnes, E.

    1986-01-01

    As part of a research program on the influence of soil acidification on metal uptake in plants, the present work was carried out in order to investigate the feasibility of instrumental neutron activation analysis for this purpose. The work was restricted to elements yielding medium- or long-lived radionuclides on neutron activation. Elements studied include Na, Sc, Cr, Ge, Co, Zn, Br, Rb, Cs, Ba and La. The material analyzed was from a comparison of trace element contents in natural vegetation from corresponding coniferous forest locations in South Norway, which is considerably exposed to acidic deposition from long-range atmospheric transport, and Central Norway, which is far less affected. In particular Rb and Cs show pronounced differences between the two regions regarding concentration levels in certain plant species. (author)

  7. NATO Advanced Study Institute on Fundamental and Technological Aspects of Organo-f-Element Chemistry

    CERN Document Server

    Fragalà, Ignazio

    1985-01-01

    The past decade has seen a dramatic acceleration of activity and interest in phenomena surrounding lanthanide and actinide organo­ metallic compounds. Around the world, active research in organo-f­ element synthesis, chemistry, catalysis, crystallography, and quantum chemistry is in progress. This activity has spanned a remarkably wide range of disciplines, from synthetic/mechanistic inorganic and organic chemistry to radiochemistry, catalytic chemistry, spectroscopy (vibra­ tional, optical, magnetic resonance, photoelectron, Mossbauer), X-ray and neutron diffraction structural analysis, as well as to crystal field and molecular orbital theoretical studies at the interface of chemistry and physics. These investigations have been motivated both by fundamental and applied goals. The evidence that f-element organo­ metallic compounds have unique chemical and physical properties which cannot be duplicated by organometallic compounds of d-block elements has suggested many new areas of endeavor and application....

  8. Soil fertility affects elemental distribution in needles of the conifer Araucaria angustifolia: A microanalytical study

    Science.gov (United States)

    Araucaria angustifolia is a conifer species found in South American subtropical forests that comprises less than 3% of the native vegetation. Thus, little is known concerning the accumulation of nutritional elements in its needles. In this study, scanning electron microscopy (SEM) coupled with energ...

  9. Studies on the chemistry of element 104 with the centrifuge system SISAK-3

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, K.; Kratz, J.V.; Mendel, M.; Naehler, A.; Trautmann, N.; Wiehl, N. [Mainz Univ. (Germany); Alstadt, J.; Omtvedt, J.P. [Oslo Univ. (Norway); Malmbeck, R.; Skarnemark, G.; Wierczinski, B. [Chalmers Univ. of Technology, Goeteborg (Sweden); Eichler, B.; Gaeggeler, H.W.; Jost, D.T.; Tuerler, A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    The centrifuge system SISAK-3 combined with a detector for the measurement of {alpha}-particles and spontaneous fission (SF) fragments in a flowing organic liquid has been applied to study the chemical behaviour of element 104 produced in the reaction {sup 248}Cm({sup 18}O,5n){sup 261}104. (author) 2 figs., 2 refs.

  10. A study on discontinuous Galerkin finite element methods for elliptic problems

    NARCIS (Netherlands)

    Janivita Joto Sudirham, J.J.S.; Sudirham, J.J.; van der Vegt, Jacobus J.W.; van Damme, Rudolf M.J.

    2003-01-01

    In this report we study several approaches of the discontinuous Galerkin finite element methods for elliptic problems. An important aspect in these formulations is the use of a lifting operator, for which we present an efficient numerical approximation technique. Numerical experiments for two

  11. Study on the correlation between the trace elements with cerebrovascular diseases

    Energy Technology Data Exchange (ETDEWEB)

    Dazhong, Zhang; Mingsong, Tai; Suqing, Chen [Sichuan Univ., Chengdu, SC (China). Inst. of Nuclear Science and Technology; and others

    1990-11-01

    In the paper, the correlation between the cerebroscular diseases, as haemorrhage, cerebral atherosclerosis, cerebral embolism, with trace element contents in hair and tissues of controls and diseases has been studied by PIXE. Biochemistry test for diseased cerebral atheroselerosis patientes were done. The distinction between the controls and diseases were revealed.

  12. Preliminary study on the existence characteristics of rare earth elements in the interstratified oxidized zone

    International Nuclear Information System (INIS)

    Wang Jinping

    2006-10-01

    There were few of studies on rare earth elements (REE) in sandstone hosted uranium deposits, except the study of sediments source tracing and REE distribution modalities. Based on the study of existence characteristics of REE in subzones of interstratified oxidized zone in Shihongtan uranium deposit, Tuha basin, the possible migration features of REE was traced, and the significance of ΣREE, LREE/HREE ratios and δEu, δCe value during the interstratified oxidation were illustrated. (authors)

  13. Trace element determination study in human hair by neutron activation analysis

    International Nuclear Information System (INIS)

    Frazao, Selma Violato

    2008-01-01

    Human hair analysis studies have been subject of continuous interest due to the fact that they can be used as an important tool to evaluate trace element levels in the human body. These determinations have been carried out to use hair for environmental and occupational monitoring, to identify intoxication or poisoning by toxic metals, to assess nutritional status, to diagnose and to prevent diseases and in forensic sciences. Although hair analysis presents several advantages over other human tissue or fluid analyses, such as organ tissue, blood, urine and saliva, there are some controversies regarding the use of hair analysis data. These controversies arise from the fact that it is difficult to establish reliable reference values for trace elements in hair. The purpose of this study was to evaluate the factors that affect element concentrations in hair samples from a population considered healthy and residing in the Sao Paulo metropolitan area. The collected human head hair was cut in small pieces, washed, dried and analyzed by neutron activation analysis (NAA). Aliquots of hair samples and synthetic elemental standards were irradiated at the IEA-R1 nuclear research reactor for 16 h under a thermal neutron flux of about 5x10 12 n cm -2 s -1 for As, Br, Ca, Co, Cr, Cs, Cu, Fe, K, La, Na, Sb, Sc, Se and Zn determinations. The induced gamma activities of the standards and samples were measured using a gamma ray spectrometer coupled to an hiperpure Ge detector. For quality control of the results, IAEA- 85 Human Hair and INCT-TL-1 Tea Leaves certified reference materials (CRMs) were analyzed. Results obtained in these CRMs presented for most of elements, good agreement with the values of the certificates (relative errors less than 10%) and good precision (variation coefficients less than 13.6%). Results of replicate hair sample analysis showed good reproducibility indicating homogeneity of the prepared sample. Results obtained in the analyses of dyed and non-dyed hair

  14. A study of the consistent and the lumped source approximations in finite element neutron diffusion calculations

    International Nuclear Information System (INIS)

    Ozgener, B.; Azgener, H.A.

    1991-01-01

    In finite element formulations for the solution of the within-group neutron diffusion equation, two different treatments are possible for the group source term: the consistent source approximation (CSA) and the lumped source approximation (LSA). CSA results in intra-group scattering and fission matrices which have the same nondiagonal structure as the global coefficient matrix. This situation might be regarded as a disadvantage, compared to the conventional (i.e. finite difference) methods where the intra-group scattering and fission matrices are diagonal. To overcome this disadvantage, LSA could be used to diagonalize these matrices. LSA is akin to the lumped mass approximation of continuum mechanics. We concentrate on two different aspects of the source approximations. Although it has been reported that LSA does not modify the asymptotic h 2 convergence behaviour for linear elements, the effect of LSA on convergence of higher degree elements has not been investigated. Thus, we would be interested in determining, p, the asymptotic order of convergence, in: Δk |k eff (analytical) -k eff (finite element)| = Ch p (1) for finite element approximations of varying degree (N) with both of the source approximations. Since (1) is valid in the asymptotic limit, we must use ultra-fine meshes and quadruple precision arithmetic. For our order of convergence study, we used infinite cylindrical geometry with azimuthal symmetry. Hence, the effects of singularities remain uninvestigated. The second aspect we dwell on is the performance of LSA in bilinear 3-D finite element calculations, compared to CSA. LSA has been used quite extensively in 1- and 2-D even-parity transport and diffusion calculations. In this work, we will try to assess the relative merits of LSA and CSA in 3-D problems. (author)

  15. Study of alkaline-earth element complexes in anhydrous acetic acid

    International Nuclear Information System (INIS)

    Petit, N.

    1968-10-01

    We have studied the complexes of alkaline-earth elements in anhydrous acetic acid. Using glass-electrode potentiometry we have studied the titration of alkaline earth acetates with perchloric acid which is the strongest acid in anhydrous acetic acid. These titrations have shown that the basic strength of these acetates increases as follows: Mg 4 ); the mixed acetate-acid sulfate complex of barium: Ba (OAc)(HSO 4 ); the mixed acetate-chloride of barium: Ba (OAc)(Cl). (author) [fr

  16. Relationship between TQM Elements and Organizational Performance : An Empirical Study of Manufacturing Sector of Pakistan

    Directory of Open Access Journals (Sweden)

    Masood ul Hassan

    2013-05-01

    Full Text Available This study empirically reveals the influence of the TQM elements comprising leadership, people management, process management, customer focus, information & analysis and strategic planning on the organizational performance in the manufacturing sector of Pakistan. The data were collected through a questionnaire survey from the 160 managers and employees of the manufacturing firms. Results using SPSS support the hypotheses that there is a positive relationship between the TQM elements and performance of Pakistani manufacturing firms. Furthermore, it is also found that customer focus is perceived as a dominant TQM practice for enhancing quality performance. Moreover, this study also provides a valuable knowledge to the top managers. Practical implementations along with the limitations have also been discussed in this study.

  17. Electrochemical Studies on Important Elements for Zirconium Recovery Form Irradiated Zircaloy-4 Cladding

    International Nuclear Information System (INIS)

    Park, J.; Sohn, S.; Hwang, I.S.

    2015-01-01

    Since Zircaloy cladding accounts for about 16 wt. % of used nuclear fuel assembly, decontamination process is required to reduce the final waste volume from spent nuclear fuel. To develop Zircaloy-4 electrorefining process as an irradiated Zircaloy cladding decontamination process, electrochemical studies on Sn, Cr, Fe and Co which are major or important elements in the irradiated cladding were conducted based on cyclic voltammetry in LiCl-KCl at 500 deg. C. Cyclic voltammetry for Sn, Fe, Cr and Co elements that should be eliminated was conducted and revealed that redox reactions of these ions are much simpler than Zr and more reductive than Zr. The reliability of cyclic voltammetry was verified by comparing diffusion coefficients and formal reduction potentials of these ions obtained in this study to previous studies. (authors)

  18. Separation by sequential chromatography of americium, plutonium and neptunium elements: application to the study of trans-uranian elements migration in a European lacustrine system

    International Nuclear Information System (INIS)

    Michel, H.

    1999-01-01

    The nuclear tests carried out in the atmosphere in the Sixties, the accidents and in particular that to the power station of Chernobyl in 1986, were at the origin of the dispersion of a significant quantity of transuranic elements and fission products. The study of a lake system, such that of the Blelham Tarn in Great Britain, presented in this memory, can bring interesting answers to the problems of management of the environment. The determination of the radionuclides in sediment cores made it possible not only to establish the history of the depositions and consequently the origin of the radionuclides, but also to evaluate the various transfers which took place according to the parameters of the site and the properties of the elements. The studied transuranic elements are plutonium 238, 239-240, americium 241 and neptunium 237. Alpha emitting radionuclides, their determination requires complex radiochemical separations. A method was worked out to successively separate the three radioelements by using a same chromatographic column. Cesium 137 is the studied fission product, its determination is done by direct Gamma spectrometry. Lead 210, natural radionuclide, whose atmospheric flow can be supposed constant. makes it possible to obtain a chronology of the various events. The detailed vertical study of sediment cores showed that the accumulation mode of the studied elements is the same one and that the methods of dating converge. The cesium, more mobile than transuranic elements in the atmosphere, was detected in the 1963 and 1986 fallout whereas an activity out of transuranic elements appears only for the 1963 fallout. The activity of the 1963 cesium fallout is of the same order of magnitude as that of 1986. The calculation of the diffusion coefficients of the elements in the sediments shows an increased migration of cesium compared to transuranic elements. An inventory on the whole of the lake made it possible to note that the atmospheric fallout constitute the

  19. Some studies on weld bead geometries for laser spot welding process using finite element analysis

    International Nuclear Information System (INIS)

    Siva Shanmugam, N.; Buvanashekaran, G.; Sankaranarayanasamy, K.

    2012-01-01

    Highlights: → In this study, a 2 kW Nd:YAG laser welding system is used to conduct laser spot welding trials. → The size and shape of the laser spot weld is predicted using finite element simulation. → The heat input is assumed to be a three-dimensional conical Gaussian heat source. → The result highlights the effect of beam incident angle on laser spot welds. → The achieved results of numerical simulation are almost identical with a real weldment. -- Abstract: Nd:YAG laser beam welding is a high power density welding process which has the capability to focus the beam to a very small spot diameter of about 0.4 mm. It has favorable characteristics namely, low heat input, narrow heat affected zone and lower distortions, as compared to conventional welding processes. In this study, finite element method (FEM) is applied for predicting the weld bead geometry i.e. bead length (BL), bead width (BW) and depth of penetration (DP) in laser spot welding of AISI 304 stainless steel sheet of thickness 2.5 mm. The input parameters of laser spot welding such as beam power, incident angle of the beam and beam exposure time are varied for conducting experimental trials and numerical simulations. Temperature-dependent thermal properties of AISI 304 stainless steel, the effect of latent heat of fusion, and the convective and radiative aspects of boundary conditions are considered while developing the finite element model. The heat input to the developed model is assumed to be a three-dimensional conical Gaussian heat source. Finite-element simulations of laser spot welding were carried out by using Ansys Parametric Design Language (APDL) available in finite-element code, ANSYS. The results of the numerical analysis provide the shape of the weld beads for different ranges of laser input parameters that are subsequently compared with the results obtained through experimentation and it is found that they are in good agreement.

  20. Studies in Japan on ingestion and organ content of trace elements of importance in radiological protection

    International Nuclear Information System (INIS)

    Kawamura, H.; Shiraishi, K.; Yukawa, M.

    1998-01-01

    Data on intake of elements through foods, water and air, and concentration or Content of such elements in body tissues are essential part of the ICRP Reference Man recommended by ICRP for use in setting body composition and also deriving essential parameters for internal dose assessment models particularly for biokinetics or metabolism of radionuclides and their stable elements (1). However, in the RCA region, these data are comparatively scarce and it has been felt necessary to accumulate relevant data of high quality, reflecting the progress in analytical and related methods. In the present CRP (Phase 2), ingestion and organ content of elements of importance in internal dose assessment for the general public, i.e. Sr, Cs, I, Th and U as of the primary priority, are to be studied by performing chemical analysis following collecting representative samples in each participating country under proper quality control and assurance program (2). The data to be accumulated will enrich our knowledge in metabolic characteristics on the national, regional and global basis, after the large amount of data accumulated particularly on the physical characteristics and organ measurements in the first phase of Reference Asian Man CRP. The National Institute of Radiological Sciences (NIRS) of Japan will participate the present phase of CRP following the current concepts on the 'Reference Man'-oriented studies in the RCA region (3). The CRP will supplement the already existing data in Japan and extend them for some elements for which our data are to be further accumulated in ingestion and tissue content in normal and healthy Japanese adult males and females. The NIRS is requested to function as a Central Reference Laboratory (CRL) to promote the CRP in co-operation with the IAEA and the NIST as well as participating laboratories (2)

  1. Study on correlation of trace elements in human hair and internal organs by nuclear methods

    International Nuclear Information System (INIS)

    Cheng Yuandi; Zhuang Guisun; Zhang Yuanxun

    1993-01-01

    Autopsy samples from 24 human males, aged 35-60 years were collected from Shanghai, People's Republic of China, to study possible relationships between the trace element content in hair and internal tissues. Samples of hair, kidney-cortex and lung were collected and analyzed. A radiochemical neutron activation analysis (RNAA) procedure was developed based on a simple group extraction scheme using zinc-diethyl dithiocarbamate and methyl-isobutyl ketone-iodide. The trace elements As, Cd, Hg, Cu and Zn were measured following this procedure. In addition, the elements Se, Na, Mg, Cl, Br, S, Cr, Co, and Rb were determined using instrumental neutron activation analysis (INAA). The reliability of the analytical procedures were checked analyzing several biological reference materials, such as IAEA-H-8 Horse Kidney, NBS-SRM-1573 Tomato Leaves and NIES-5 Human Hair. The results showed a larger concentration variability for As, Cd and Hg than for Cu, Se and Zn. Some significant positive correlations were found for some elements among different tissues. (author). 15 refs, 22 figs, 4 tabs

  2. Studies to single subassembly flow monitoring with a complete 7 element array under sodium

    International Nuclear Information System (INIS)

    Hess, B.; Ruppert, E.; Stehle, H.; Vinzens, K.

    1975-01-01

    A core restraint system in a fast reactor serves to limit fuel element movement leading to reactivity changes and misalignment of control rod drives and instrumentation. To guarantee proper control rod function the upper ring of the passive restraint system for the SNR-300 should keep subassembly displacement below 20 mm, whereas a free bowing up to 25 mm does not impair subassembly handling. With respect to single subassembly instrumentation the influences of subassembly displacement on temperature and flow monitoring were not exactly known. As part of the SNR-300 R and D programme a complete clamped array, consisting of 4 full size fuel elements and 3 blanket elements was tested for more than 4000 hours at 600 0 C in the AKB sodium loop at Interatom, Bensberg. The test was split into two phases and the total cluster was prestrained in the second phase to simulate 15 mm subassembly displacement at the level of the upper pads. Although this test was mainly considered as an endurance test to demonstrate the integrity of prestrained core elements, effort were made to study the feasibility of single subassembly flow monitoring with this full size model of a core section. (Auth.)

  3. Elemental diet as prophylaxis against radiation injury. Histological and ultrastructural studies

    International Nuclear Information System (INIS)

    McArdle, A.H.; Wittnich, C.; Freeman, C.R.; Duguid, W.P.

    1985-01-01

    The authors investigated whether elemental diet feeding would protect the intestine from radiation injury. Five dogs were fed an elemental diet for three days before receiving pelvic irradiation (500 rad/day for four days) and were maintained on the diet during the days of irradiation. These dogs were compared with five dogs that were fed normal kennel ration, but were treated similarly otherwise. One day and five days following completion of the radiation treatment, the dogs were anesthetized and a biopsy specimen of terminal ileum was taken for histologic and electron microscopic studies. In the dogs fed the elemental diet, there was no significant damage to the intestine seen on histological examination, and electron microscopy disclosed elongated microvilli and no organelle damage. However, both histological and electron microscopic examination of the intestine from dogs maintained on normal kennel ration showed that severe damage had occurred from the irradiation procedure. It seems, therefore, that the feeding of an elemental diet to dogs as a prophylaxis can afford protection to the intestine from the acute phase of radiation injury

  4. Treatment of data in the study of elemental concentration of biological materials

    International Nuclear Information System (INIS)

    Ng, K. H.; Bradeley, D.A.; Looi, L.M.

    1994-01-01

    In the present work on the breast tissue, we detail the use of rigorous statistical methodology. We have carried out a multi-elemental analysis of 46 pairs of normal and malignant human breast tissue by instrumental neutron activation analysis. The TRIGA Mark II research reactor which was used provided a thermal neutron flux of the order of 10 sup 1 sup 2 neutrons cm sup -2 s sup -1. Twelve elements were determined. Sampling theory was used to determine the minimum number of paired samples required to yield a given discrimination power. Probability plots were applied to illustrate the log-normal and quasi-normal behaviour of distributions for all 12 of the elements which were examined. Statistically significant differences between malignant and normal tissue have been observed in respect of all elements using the Wilcoxon signed-ranks test. Finally, Spearman ranked correlation coefficients have been obtained, yielding a number of significant correlations between pairs of variables. We illustrate the value of such treatment by making comparisons with the results of a number of other studies of breast tissue. 2 figs., 2 refs. (Author)

  5. Aerodynamic and thermal studies of cans of gas cooled fuel elements

    International Nuclear Information System (INIS)

    Gelin, P.

    1964-01-01

    Research on clusters was undertaken at the CEA in 1959, while studies on herring-bone cans were developed at the EDF Laboratory at Chatou and the CEA laboratory at Saclay at the end of 1959. In 1962, a general study on corrugations was begun at the Saclay Laboratory with a view to improving the clusters, and continued later in both laboratories relative to the internal cooling of annular fuel elements. As these studies progressed, trial facilities were extended while experimental methods have improved constantly. At the present time, both laboratories, working in complete collaboration, have powerful means at their disposal. Work on the clusters has been concerned chiefly with pressure losses due to the assembly parts, and with the temperature variations around the elements of the cluster. In this way, we have been able to determine satisfactorily the hot points of the can, the deformations of the rods and the conditions of stability of these deformations. In the case of the herring-bone cans, studies have been directed to the evolution of performances as a function of the geometric parameters on the one hand, and to the special aerodynamic and thermal features caused by the fins and by interruptions of cartridge on the other hand. These studies have led to a very thorough knowledge of the cartridges chosen for the reactors EDF 2 and EDF 3, and now open up very hopeful prospects for future reactors, particularly those fitted with annular elements; among the alternatives suitable for the inner surface of the annular element can, corrugations and longitudinal fins have been fairly extensively tested over a wide range of Reynolds number. (authors) [fr

  6. Interlaboratory quality assurance studies: Their use in certifying natural waters for major constituents and trace elements

    International Nuclear Information System (INIS)

    Alkema, H.; Simser, J.; Hjelm, L.

    1998-01-01

    Environmental programs throughout North America have demonstrated a strong awareness of the usefulness of interlaboratory studies for disclosing the quality of analytical results. The Ecosystem Interlaboratory Quality Assurance Program offered by the National Water Research Institute has a wide participation base of laboratories. Many of these laboratories are accredited and employ a number of recognized analytical methods. The interlaboratory study data archives contain a wealth of data for natural surface and rain waters from across the continent. These archives have proven to be a reliable means of characterizing a variety of constituents. Data assessments from these studies accurately identify the variability of data and the presence of any outliers. Repeated use of selected samples in a regular QA program confirms their stability. Time charts and statistical techniques are used to illustrate this stability and yield the precision of pooled analyses. The availability of archived data from interlaboratory studies has enabled the Institute to develop and certify natural water and trace element standards. The natural water CRM, ION-911, has been available for several years. Its historical aspects are discussed as well as the processes leading to the certification of TMRain-95, a soft water standard certifying 22 trace elements. This paper focuses on the use of select laboratories in round-robin evaluations to provide accurate values for constituent concentrations. Natural water and fortified trace element CRMs meet a recognized need in the generation of accurate data for environmental programs. (orig.)

  7. Studies in China on ingestion and organ content of trace elements of importance in radiological protection

    International Nuclear Information System (INIS)

    Wang Jixian; Zhu Hongda; Chen Rusong

    1998-01-01

    In order to ensure the representative sampling for ingestion study a sampling strategy that took account of all relevant ethnic, socioeconomic and geographic variables was devised by the Institute of Nutrition and Food Hygiene, CAPM for the first total diet study in China. Total diet samples was prepared as 'market basket' samples. Based on the information of food consumption, composition and cookery obtained by the diet consumption survey, the 12 categories of food were collected from nearby markets and cooked by local cookery. For investigation the relationship between elements intake and organ content the specimens for organ content study will be collected from the subjects of sudden death inhabited in the region where the diet samples to be collected for ingestion study. The analytical technique that will be used to determine trace elements of interest in specimens of diet and organs have been proposed, for I that is ENAA, for Cs and Sr that is FAAS or ICP-MS, and for U and Th that is ICP-MS. At last the report summarized the information on trace element content of drinking water supplies in China. (author)

  8. Finite element simulations with ANSYS workbench 17 theory, applications, case studies

    CERN Document Server

    Lee, Huei-Huang

    2017-01-01

    Finite Element Simulations with ANSYS Workbench 17 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences spreads though this entire boo...

  9. Study of the Internal Mechanical response of an asphalt mixture by 3-D Discrete Element Modeling

    DEFF Research Database (Denmark)

    Feng, Huan; Pettinari, Matteo; Hofko, Bernhard

    2015-01-01

    and the reliability of which have been validated. The dynamic modulus of asphalt mixtures were predicted by conducting Discrete Element simulation under dynamic strain control loading. In order to reduce the calculation time, a method based on frequency–temperature superposition principle has been implemented......In this paper the viscoelastic behavior of asphalt mixture was investigated by employing a three-dimensional Discrete Element Method (DEM). The cylinder model was filled with cubic array of spheres with a specified radius, and was considered as a whole mixture with uniform contact properties....... The ball density effect on the internal stress distribution of the asphalt mixture model has been studied when using this method. Furthermore, the internal stresses under dynamic loading have been studied. The agreement between the predicted and the laboratory test results of the complex modulus shows...

  10. Finite element simulations with ANSYS Workbench 18 theory, applications, case studies

    CERN Document Server

    Lee,\tHuei-huang

    2018-01-01

    Finite Element Simulations with ANSYS Workbench 18 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire...

  11. Natural analogue study on trace element migration in geological formation at Horonobe area, Japan

    International Nuclear Information System (INIS)

    Iwatsuki, Teruki; Ishii, Eiichi; Mizuno, Takashi; Honda, T.

    2010-01-01

    Usefulness of natural analog to study radionuclide transport models for deep geological repositories for high-level and long lived radioactive wastes is widely recognized. As the groundwater flow in the Horonobe area, Hokkaido, Japan is known to be stationary with neutral pH value and of reductive nature for a long-term, the authors began natural analog study by observing atomic distribution of such trace elements as rare earths, uranium, and thorium in carbonate nodules and veins of uranium minerals from several selected faults (Wakkanai F., Ketoi F., etc) in the area with the use of XED, XRF, and ICP-MS. The results give important information as to the maintainability of the rocks for trace elements and help to provide confidence in the safety assessment in the long term. (S. Ohno)

  12. Gamma-ray scanning of neutron activated geological sediments for studying elemental profile distributions

    International Nuclear Information System (INIS)

    Ellinger, M.; Janghorbani, M.; Starke, K.

    1976-01-01

    Gamma-ray scanning for application to elemental profile studies of geological samples was studied with a neutron activated Baltic Shield sediment. Profile distribution of seven elements were measured. The capabilities and limitations of gamma-ray scanning are discussed by comparing the results with profiles obtained after the mechanical subdivision of the sample and the activation of the appropriately sized separates. With respect to the merits and limitations of scanning gamma-ray spectrometry applied to activated complex matrices the following conclusions were drawn. Qualitatively, the scanning method yields the same information as the much more laborious method of mechanical sudbisubdivision. Quantitatively, it is significantly less accurate. The scanning method has the significant advantage of allowing preservation of the sample. This could be important for such speciments as lunar and archeological materials. The method reduces sample preparation time and the possibility of sample contamination. (T.G.)

  13. Systematic studies of radioactive elements in various rocks in northern Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Wattananikorn, K; Teeyasoontranont, V; Vilaithong, T; Lerdthusnee, S

    1985-12-31

    An investigation into the concentrations of the main heat producing radioactive elements, uranium, thorium and potassium in various rock samples was carried out by gamma ray spectrometry. The samples included igneous, metamorphic and sedimentary rocks of different ages. They were collected mainly from the northern part of the country. Results of the investigation show relatively high concentrations of radioactive elements in most rock types, compared to the average values commonly cited. However, for granitic rocks the values obtained are, more or less, comparable to those obtained by Amnuaychai Thienprasert and his colleagues, who worked in the same area using different methods of investigation. Apart from that granitic samples of triassic and cretaceous ages also have a similar radioactive elements concentration to those of the Darby pluton in Southeastern Seward Peninsular, Alaska, the Granite Mountain in Wyoming and the Conway Granite of New Hampshire which has been cited as a low-grade uranium-thorium resource. As a consequence of such high radioactive element concentrations, heat generations of most rock samples investigated are much higher than reported average values. The heat generations seem to have some influence on the nature of heat sources of hot springs in northern Thailand, especially at Ban Pong, Nam Ron hot spring Amphoe Mae Chan. Furthermore the radiogenic heat productions also affect to a great extent surface heat flow in the region provided that the radioactive element concentrations do not decrease with depth. Surface heat flow in northern Thailand was recently reported to be very high compared to the average value of the earth. This high heat flow was suspected to be caused by extensional tectonics resulting indirectly from sea-floor spreading in the Andaman Sea during the last 10 million years. However, from this study it can be shown that heat generations could be another factor which has much influence on the value of the surface heat flow.

  14. Study on the state of a surface of compounds of vanadium with light elements

    International Nuclear Information System (INIS)

    Povstugar, V.I.; Mikhajlova, S.S.; Trapeznikov, V.A.

    1976-01-01

    Roentgenoelectron study of powderlike compounds of vanadium with light elements (C, N, O, S) was carried out. The study was made in the temperature range of 70-500 deg C. The results were obtained in an electron magnetic spectrometer. Spectra of inner levels O 1S and V 2p and valance bands are presented. The experimental results can be employed for the study of synthesis problems of the given class of compounds. Due to high surface activity the study of catalytic properties of finely dispersed vanadium compounds by roentgenoelectron spectroscopy method gives much information about surface processes

  15. Field studies on the terrestrial behavior of actinide elements in East Tennessee

    International Nuclear Information System (INIS)

    Garten, C.T. Jr.; Bondietti, E.A.; Trabalka, J.R.; Walker, R.L.; Scott, T.G.

    1984-01-01

    Field studies on the comparative uptake of various actinide elements ( 232 Th, 233 U, 238 U, 239 Pu, 241 Am, and 244 Cm) by plants and animals inhabiting historically contaminated environments on the Oak Ridge National Laboratory (ORNL) reservation in East Tennessee are summarized. The present-day pattern of actinide element bioaccumulation from a flood plain site contaminated with Pu in 1944 is U > Th approx. Pu. Thus the environmentally dispersed 239 Pu exhibits a transfer from floodplain soil to biota comparable to that of indigenous 232 Th and less than that of the indigenous 238 U. This ranking agrees with the chemical extractability of U, Th, and Pu from soil, using either weak acids or strongly basic reagents. The pattern of actinide element uptake from the shoreline of a historically contaminated pond is Pu 238 U = 233 U. This ranking also agrees with the chemical extractability of Pu, Am, Cm, and U from shoreline sediment, using weak acids. Results from field studies at ORNL agree with what has been generally inferred about the relative food chain transfer of the actinides, based on laboratory studies and field studies at other sites in the United States. Because they share the same valence state, there are apparent strong similarities in soil sorption, plant uptake, and animal uptake between trivalent Am and Cm and between tetravalent Pu and Th. Available evidence suggests that knowledge of the behavior of naturally occurring 232 Th in the terrestrial food chain can be useful for predicting the long-term fate of environmentally dispersed 239 Pu, while data on 238 U might be used to place an upper limit on the expected long-term food chain transfer of all transuranic elements except Np. 33 references, 5 figures, 1 table

  16. Study on the high-precision laser welding technology of nuclear fuel elements processing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry.

  17. Study in Malaysia on ingestion and organ content of trace elements of importance in radiological protection

    International Nuclear Information System (INIS)

    Zawiah, H.; Khalik Haji Wood, A.; Shahrom, A.W.; Halim Mansar, A.

    1998-01-01

    Involvement in the Reference Asian man project, Phase 2 began at the project, formulation meeting in Hitachinaka City, Japan in February 1995. The objective of the project is to look into the ingestion and organ content of trace elements of importance in radiological protection. The data on ingestion of radionuclides from diet and deposition in tissues are important for estimating internal dose for radiation protection. The meeting agreed the elements of primary interest are caesium, iodine, strontium, thorium and uranium in samples of representative diets and autopsy specimens of liver, muscle, thyroid, bone, and kidney. This report will highlight the methodology for implementation of the project including defining the study groups, sampling duplicate diet and autopsy specimens and the analytical techniques involved. Emphasis will be given to nuclear-related analytical technique (NAA) together with a complementary technique (AAS) available in our institution. Some data on trace element contents of local marine and fresh water fishes and milk was reported. Included also a brief discussion on drinking water quality in Malaysia and some information on related studies available. The information on drinking water will be very useful to the present study since water is part of daily diet. (author)

  18. Contaminant transport, revegetation, and trace element studies at inactive uranium mill tailings piles

    International Nuclear Information System (INIS)

    Dreesen, D.R.; Marple, M.L.; Kelley, N.E.

    1978-01-01

    The stabilization of inactive uranium mill tailings piles is presently under study. These studies have included investigations of stabilizing tailings by attempting to establish native vegetation without applying irrigation. Examination of processes which transport tailings or associated contaminants into the environment has been undertaken to better understand the containment provided by various stabilization methods. The uptake of toxic trace elements and radionuclides by vegetation has been examined as a mechanism of contaminant transport. The source terms of 222 Rn from inactive piles have been determined as well as the attenuation of radon flux provided by shallow soil covers. The possibility of shallow ground water contamination around an inactive pile has been examined to determine the significance of ground water transport as a mode of contaminant migration. The rationale in support of trace element studies related to uranium milling activities is presented including the enrichment, migration, and toxicities of trace elements often associated with uranium deposits. Some concepts for the stabilization of inactive piles are presented to extrapolate from research findings to practical applications. 25 references, 8 tables

  19. Study on the high-precision laser welding technology of nuclear fuel elements processing

    International Nuclear Information System (INIS)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y.

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry

  20. Use of neutron activation techniques for studying elements distribution. Applications in geochemistry, ecology and technology

    International Nuclear Information System (INIS)

    Flitsyan, E.S.

    1997-01-01

    The essence of the radiography method, sensitivity of which is within a range of 10 -2 - 10 -7 g · mm -2 and resolution ability extend from 0,01 to 100 μm, consists in determining the distributions of ionising irradiation sources on a surface under study by using the two-dimensional field of their irradiation registered by means of photoemulsion or dielectric track detector. Statistical analysis and computer processing of the radiographic images have allowed one to solve the two main tasks of the method , namely, the determination of true distributions of ionising irradiation sources on the surface of an object under study and the quantitative estimation within given accuracy of the content of an element under study in a sample. A complex of radiographic techniques based on the registration of secondary irradiation of the activated nuclei, instantaneous products of the nuclear reactions, and fusion fragments of the transuranium elements, has been developed to solve a series of the problem in geology and geochemistry, as well as for an analysis of technological and environment samples. Upon designing and constructing special comparison standards modelling a sample in composition and structure, the quantitative data on distributions of more than forty elements in rock sections and these of the main microcomponents, including oxygen, in the superconducting ceramics samples have also been obtained. (author)

  1. Using isoelectric focussing and neutron activation analysis to study protein-bound tracer elements

    International Nuclear Information System (INIS)

    Schmelzer, W.

    1976-01-01

    A method to determine protein-bound tracer elements was determined by combining a protein separation method with neutron activation analysis. Gel filtration, disk electrophoresis, and isoelectric focussing were studied with regard to their suitability as separation methods. Using isoelectric focussing, human serum protein could be separated with good resolution on a preparative scale. The Se, Cr, Ag, Sc, Fe, Zn, Co, Br, Na, Rb, and Cs contents of the various protein fractions were determined by instrumental neutron activation analysis and by gamma-spectroscopic identification of their long-lived nuclides. Particular attention was paid to the main source of error with this method, i.e. contamination of the proteins in the course of the separation process. Information on the binding of the elements to protein was obtained by comparing the contents in the serum and in the protein separated by gel chromatography. For example, 75% of the Se and 30% of the Cs are bound to protein. Contamination of the protein fractions was studied by means of tracer elements with the element Se, errors due to contamination could be ruled out. The method was modified for the special imvestigation of Se-protein complexes in the serum. The Se content was determined by activation analysis via the short-lived radionuclide sup(77m)Se, this considerably reducing the duration of analysis. With regard to focussing, discrimination was improved in the pH region in which specific Se complexes were found. The activity distribution in fractionated serum protein labelled in vitro with 75 Se in the presence of erythrocytes showed that specific labelling is possible in this way. It is thus possible to study the distribution of Se carrier proteins with the aid of a radiotracer technique. (orig./RB) [de

  2. Study of the trace element content in human cataractous lenses by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Kouris, T.; Theodossiadis, G.; Papadopoulou, C.; Kanias, G.D.; Baikraktari-Kouri, E.

    1986-01-01

    Cataract is a very common disease of the eye lens known since the ancient times. Different mechanisms are responsible for the biogenesis of cataract but the greater number of scientists agree with the theory that cataract formation can be attributed to metabolism disorders in the lens. Instrumental neutron activation analysis has been applied in this work for the determination of the following trace elements: antimony, cobalt, iron, rubidium, selenium and zinc in human lenses with mature cataract. The obtained results are statistically treated and correlated with age and sex of patients. Based on these findings the concentration of each studied element does not have any correlation with the age and/or sex of the patients i.e. when the lens becomes totally opaque. (author)

  3. Anion-exchange Studies of Radioactive Trace Elements in Sulphuric Acid Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Samsahl, K

    1963-01-15

    As part of a chemical group separation procedure used as a pretreatment in gamma spectrometric analysis, a study has been made of the adsorption from sulphuric acid solutions on strongly basic anion exchange resins, prepared in the hydroxide and the sulphate forms, of trace activities of Na, P, K, Ca, Sc, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Rb, Sr, Zr, Nb, Mo, Tc, Ag, Cd, In, Cs, Ba, La, Ce, Hf, Ta, W, Ir, Pa and Np. Besides adsorbing some of the trace elements in the solution, the anion exchange resin in the hydroxide form will neutralize the bulk of the sulphuric acid. This makes possible the subsequent sequential separation of chloride complexes on short anion-exchange columns by a stepwise increasing of the HCl concentration of the solution. On the basis of the results obtained in the present and earlier experiments, a new improved chemical group-separation procedure for mixtures of radioactive trace elements is outlined.

  4. Spectrophotometric studies of transcurium element halides and oxyhalides in the solid state

    International Nuclear Information System (INIS)

    Young, J.P.; Haire, R.G.; Fellows, R. L.; Peterson, J.R.

    1978-01-01

    The present state of a microscale spectrophotometric technique is described. The application of spectrophotometry to transcurium elements (Bk, Cf, Es) requires some rather specialized microtechniques for the following reasons: only small amounts of these elements are available; their radioactivity makes the use of μg-sized samples desirable; and spectral study of solids requires thin samples. A schematic diagram of the microscope-spectrophotometer used for spectrophotometric study of the transcurium element compounds is shown. The spectrophotometer, of local design, consists of two microscopes equipped with Cassegrainian reflecting microscope objective lenses, a quartz field lens, and a Jarrell Ash 1/2 meter scanning monochromator equipped with a 1180 line/mm grating blazed at 4000 A. The photomultiplier used in this system is an S-1 type RCA 7102 operated at approximately -50 deg C. This grating-photomultiplier combination provides a continuous response free of discontinuities over the useful wavelength range of the system from 3000 to 11 000 A. The microscope-spectrophotometer is a single beam instrument. Each spectral trace is registered as photomultiplier current on a strip chart recorder. In order to obtain true absorption spectra, however, the output from the photometer is also simultaneously digitized for on-line processing. The unique advantages of applying both spectrophotometric and X-ray powder diffraction methods on the sample, in order to identify and characterize newly synthesized compounds, are also discussed. (T.G.)

  5. Finite Element Method Application in Areal Rainfall Estimation Case Study; Mashhad Plain Basin

    Directory of Open Access Journals (Sweden)

    M. Irani

    2016-10-01

    Full Text Available Introduction: The hydrological models are very important tools for planning and management of water resources. These models can be used for identifying basin and nature problems and choosing various managements. Precipitation is based on these models. Calculations of rainfall would be affected by displacement and region factor such as topography, etc. Estimating areal rainfall is one of the basic needs in meteorological, water resources and others studies. There are various methods for the estimation of rainfall, which can be evaluated by using statistical data and mathematical terms. In hydrological analysis, areal rainfall is so important because of displacement of precipitation. Estimating areal rainfall is divided to three methods: 1- graphical. 2-topographical. 3-numerical. This paper represented calculating mean precipitation (daily, monthly and annual using Galerkin’s method (numerical method and it was compared with other methods such as kriging, IDW, Thiessen and arithmetic mean. In this study, there were 42 actual gauges and thirteen dummies in Mashhad plain basin which is calculated by Galerkin’s method. The method included the use of interpolation functions, allowing an accurate representation of shape and relief of catchment with numerical integration performed by Gaussian quadrature and represented the allocation of weights to stations. Materials and Methods:The estimation of areal rainfall (daily, monthly,… is the basic need for meteorological project. In this field ,there are various methods that one of them is finite element method. Present study aimed to estimate areal rainfall with a 16-year period (1997-2012 by using Galerkin method ( finite element in Mashhad plain basin for 42 station. Therefore, it was compared with other usual methods such as arithmetic mean, Thiessen, Kriging and IDW. The analysis of Thiessen, Kriging and IDW were in ArcGIS10.0 software environment and finite element analysis did by using of Matlab

  6. Study on elements concentrations on seabird feathers by instrumental neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Theophilo, Carolina Y.S.; Moreira, Edson G. [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), São Paulo, SP (Brazil); Figueira, Rubens C.L.; Colabuono, Fernanda I., E-mail: carolina.theophilo@gmail.com, E-mail: emoreira@ipen.br, E-mail: rfigueira@usp.br, E-mail: ficolabuono@gmail.com [Universidade de São Paulo (USP), São Paulo, SP (Brazil). Instituto Oceanográfico

    2017-07-01

    Seabirds are very sensitive to environmental changes and because of their large longevity they are also sensitive to cumulative impacts. These birds usually occupy the higher trophic levels. White-chinned petrel (Procellaria aequinoctialis) and black-browed albatross (Thalassarche melanophris) are Procellariiformes, which is a seabird order, composed of 4 families. In the last years, researches are being done and actions are being taken to reduce the mortality of albatrosses and petrels caused by human activities. Due to the great ecological importance of these birds and the developed work with Procellariiformes, this study purpose is to quantify the Br, Cl, Cu, K, Mg, Mn, Na and V elements in white-chinned petrel and black-browed albatross feathers. Bird specimens were killed accidentally by pelagic longline fisheries operating off southern Brazil. Feathers were cleaned with acetone and then milled in a cryogenic mill. Instrumental Neutron Activation Analysis (INAA) was used for quantification of the element concentrations and measurements of induced activities were performed in a HPGe detector for gamma ray spectrometry. The obtained results on feathers showed that concentrations in these birds are not higher than others studies with the same species and, with exception of Br, there are no significant differences between elements mean concentrations in the two seabirds. (author)

  7. Study on elements concentrations on seabird feathers by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Theophilo, Carolina Y.S.; Moreira, Edson G.; Figueira, Rubens C.L.; Colabuono, Fernanda I.

    2017-01-01

    Seabirds are very sensitive to environmental changes and because of their large longevity they are also sensitive to cumulative impacts. These birds usually occupy the higher trophic levels. White-chinned petrel (Procellaria aequinoctialis) and black-browed albatross (Thalassarche melanophris) are Procellariiformes, which is a seabird order, composed of 4 families. In the last years, researches are being done and actions are being taken to reduce the mortality of albatrosses and petrels caused by human activities. Due to the great ecological importance of these birds and the developed work with Procellariiformes, this study purpose is to quantify the Br, Cl, Cu, K, Mg, Mn, Na and V elements in white-chinned petrel and black-browed albatross feathers. Bird specimens were killed accidentally by pelagic longline fisheries operating off southern Brazil. Feathers were cleaned with acetone and then milled in a cryogenic mill. Instrumental Neutron Activation Analysis (INAA) was used for quantification of the element concentrations and measurements of induced activities were performed in a HPGe detector for gamma ray spectrometry. The obtained results on feathers showed that concentrations in these birds are not higher than others studies with the same species and, with exception of Br, there are no significant differences between elements mean concentrations in the two seabirds. (author)

  8. A study on the recovery of TRU elements by a container-aided solid cathode

    International Nuclear Information System (INIS)

    Kwon, S.W.; Lee, J.H.; Woo, M.S.; Shim, J.B.; Kim, E.H.; Yoo, J.H.; Park, S.W.; Park, H.S.

    2005-01-01

    Pyroprocessing is a very prominent way for the recovery of the long-lived elements from the spent nuclear fuel. Electrorefining is a key technology of pyroprocessing and generally composed of two recovery steps - deposit of uranium onto a solid cathode and the recovery of TRU (TRansUranic) elements by a liquid cadmium cathode. The liquid cadmium cathode has some problems such as a cadmium volatilization problem, a low separation factor, and a complicates structure. In this study, CASC (Container-Aided Solid Cathode) was proposed as a candidate for replacing a liquid cadmium cathode and the deposition behavior of the cathode was examined during the electrorefining experiments. The CASC is a solid cathode surrounded with a porous ceramic container, where the container is used to capture the dripped deposit from the cathode. In the electrorefining experiment, the uranium used as a surrogate for the TRU elements, was effectively separated from cerium. The anode material and surface area were also investigated during electrolysis experiments for the more efficient electrorefining system. From the results of this study, it is concluded that the container-aided solid cathode can be a potential candidate for replacing a liquid cadmium cathode and the cathode should be developed further for the better electrolysis operation. (author)

  9. The Study of the Elemental Concentrations in the Some Rocks and Cements in Myanmar

    International Nuclear Information System (INIS)

    Khin Mar Kyu; Yi Yi Myint; San Yee

    2006-06-01

    X-ray fluorescence (XRF) spectrometry is an analytical technique widely used for elemental analysis in both industrial and research laboratories. In this paper, energy dispersive x-ray technique was used in nine rock samples and five cement samples to measure the elemental concentrations. By using EDX-700, silicon was found as major element containedin one rock sample, chorine was found as major element contained in four rock samples, calcium was found as major element contained in two rock samples and iron was found as major element contained in two rock samples. In all cement samples, calcium was found as major element

  10. Study on the concentration and seasonal variation of inorganic elements in 35 species of marine algae

    DEFF Research Database (Denmark)

    Hou, Xiaolin; Yan, X.J.

    1998-01-01

    The concentrations of five major and 28 trace elements in 35 marine algae collected along the coast of China were determined by instrumental neutron activation analysis. The concentrations of halogens, rare earth elements and many transition metal elements in marine algae are remarkably higher than...... those in terrestrial plants. The concentration factors for 31 elements in all collected algae were calculated, those for tri- and tetra-valent elements were higher than those of the mono- and di-valent elements in marine algae. The biogeochemical characteristics of inorganic elements in marine algae...

  11. A Literature Study of Matrix Element Influenced to the Result of Analysis Using Absorption Atomic Spectroscopy Method (AAS)

    International Nuclear Information System (INIS)

    Tyas-Djuhariningrum

    2004-01-01

    The gold sample analysis can be deviated more than >10% to those thrue value caused by the matrix element. So that the matrix element character need to be study in order to reduce the deviation. In rock samples, the matrix elements can cause self quenching, self absorption and ionization process, so there is a result analysis error. In the rock geochemical process, the elements of the same group at the periodic system have the tendency to be together because of their same characteristic. In absorption Atomic Spectroscopy analysis, the elements associate can absorb primer energy with similar wave length so that it can cause deviation in the result interpretation. The aim of study is to predict matrix element influences from rock sample with application standard method for reducing deviation. In quantitative way, assessment of primer light intensity that will be absorbed is proportional to the concentration atom in the sample that relationship between photon intensity with concentration in part per million is linier (ppm). These methods for eliminating matrix elements influence consist of three methods : external standard method, internal standard method, and addition standard method. External standard method for all matrix element, internal standard method for elimination matrix element that have similar characteristics, addition standard methods for elimination matrix elements in Au, Pt samples. The third of standard posess here accuracy are about 95-97%. (author)

  12. Study of the circumstance influence on the elemental distribution in ancient animal bone using μ-XRF

    International Nuclear Information System (INIS)

    Yan Lingtong; Feng Songlin; Li Li; Xu Wei; Feng Xiangqian; Xie Guoxi

    2010-01-01

    Elemental analysis of archaeological bone plays an important role in the study of the dietary habits of ancient animals. The elemental characteristic of diagenetic skeletons depends on the surrounding circumstance. The study of environmental influence on the elemental concentration of ancient bone is significant. In this paper, the diagenetic influence on archaeological skeletons is analyzed by microbeam X-ray fluorescence (μ-XRF). The results show that the enamel is an excellent barrier to the diagenesis and the element Sr in bone isn't susceptible to contamination from the buried environment. (authors)

  13. Comparative Study on Interface Elements, Thin-Layer Elements, and Contact Analysis Methods in the Analysis of High Concrete-Faced Rockfill Dams

    Directory of Open Access Journals (Sweden)

    Xiao-xiang Qian

    2013-01-01

    Full Text Available This paper presents a study on the numerical performance of three contact simulation methods, namely, the interface element, thin-layer element, and contact analysis methods, through the analysis of the contact behavior between the concrete face slab and the dam body of a high concrete-faced rockfill dam named Tianshengqiao-I in China. To investigate the accuracy and limitations of each method, the simulation results are compared in terms of the dam deformation, contact stress along the interface, stresses in the concrete face slab, and separation of the concrete face slab from the cushion layer. In particular, the predicted dam deformation and slab separation are compared with the in-situ observation data to classify these methods according to their agreement with the in-situ observations. It is revealed that the interface element and thin-layer element methods have their limitations in predicting contact stress, slab separation, and stresses in the concrete face slab if a large slip occurs. The contact analysis method seems to be the best choice whether the separation is finite or not.

  14. Using a finite element pediatric hip model in clinical 2 evaluation - a feasibility study

    DEFF Research Database (Denmark)

    Skytte, T. L.; Mikkelsen, Lars Pilgaard; Sonne-Holm, Stig

    2017-01-01

    The paper describe a method to construct a finite element model of the hip joint of a child based on clinical recorded CT data. A model which can be used for diagnostic aid and pre-operative surgical evaluation. First part of this development is a feasibility study of this method. A scan...... to previous published experimental studies and computational models investigating the adult hip joint. Good correlation between the current model and previous models were found. The current case specific modeling technique may be a useful complement to the previously developed hip models....

  15. Safety studies on oxide fuel elements for the fast neutron programme

    International Nuclear Information System (INIS)

    Ollier, H.; Truffert, J.

    1976-01-01

    Studies leading to the definition of a fuel element and instructions for its use overlap with safety studies to the extent that they must guarantee, for nominal running conditions, a failure rate consistent with the working rules of the Station. Given the present state of knowledge on the causes and kinetics of damage affecting the cladding, it is mainly dealt with the principles of this research. The advantages of applying statistical computing methods to the two factors which govern the lifetime of the pins: their working conditions and quality, are demonstrated [fr

  16. Multidimensional study of the trace elements in the American south western prophyry copper type deposits: mineralogy of uranium

    International Nuclear Information System (INIS)

    Cesbron, Fabien; Drin, Nicolas.

    1981-09-01

    The use of the spark source masse spectrometry and data treatment methods (principal component analysis and discriminent analysis) allow to describe the trace elements comportments in the porphyry copper type deposits of Arizona (USA) and Sonora (Mexico). The chemical elements are studied in relationship with the alteration zones of these deposits. A electronic microprobe study specifies the uranium bearing minerals [fr

  17. Elemental analysis of edible grains by micro-PIXE: Common buckwheat case study

    Energy Technology Data Exchange (ETDEWEB)

    Vogel-Mikus, K. [Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, SI-1000 Ljubljana (Slovenia); Pelicon, P.; Vavpetic, P. [Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Kreft, I. [Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, SI-1000 Ljubljana (Slovenia)], E-mail: ivan.kreft@guest.arnes.si; Regvar, M. [Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, SI-1000 Ljubljana (Slovenia)

    2009-09-01

    The aim of this study was the adaptation of the micro-PIXE method for analysis of nutritionally relevant heavy elements in different tissues of the grain of common buckwheat (Fagopyrum esculentum), as a representative nutritionally interesting grain food source. At 57% of the buckwheat grain biomass, the endosperm was a modest nutrient source when compared to the cotyledons, at 17% of the biomass. These latter contained high concentrations of trace elements, representing 91% of the total grain Zn, 87% for P, 70% for S, 62% for Mg, 60% for K, 54% for Cu, 53% for Mn and 35% for Fe. The husk provided storage for 85% of the total Ca, 84% for Al, 83% for Si, 76% for Cl, 69% for Ti and 46% for Fe. Knowledge on these preferential elemental constitutions of the different grain tissues makes the possibility of designing target products with nutritionally optimal constitution more feasible. These data represent a basis for a more targeted approach to nutritional improvement of grains intended for human consumption.

  18. Elemental analysis of edible grains by micro-PIXE: Common buckwheat case study

    International Nuclear Information System (INIS)

    Vogel-Mikus, K.; Pelicon, P.; Vavpetic, P.; Kreft, I.; Regvar, M.

    2009-01-01

    The aim of this study was the adaptation of the micro-PIXE method for analysis of nutritionally relevant heavy elements in different tissues of the grain of common buckwheat (Fagopyrum esculentum), as a representative nutritionally interesting grain food source. At 57% of the buckwheat grain biomass, the endosperm was a modest nutrient source when compared to the cotyledons, at 17% of the biomass. These latter contained high concentrations of trace elements, representing 91% of the total grain Zn, 87% for P, 70% for S, 62% for Mg, 60% for K, 54% for Cu, 53% for Mn and 35% for Fe. The husk provided storage for 85% of the total Ca, 84% for Al, 83% for Si, 76% for Cl, 69% for Ti and 46% for Fe. Knowledge on these preferential elemental constitutions of the different grain tissues makes the possibility of designing target products with nutritionally optimal constitution more feasible. These data represent a basis for a more targeted approach to nutritional improvement of grains intended for human consumption.

  19. Study of candu fuel elements irradiated in a nuclear power plant

    International Nuclear Information System (INIS)

    Ionescu, S.; Uta, O.; Mincu, M.; Anghel, D.; Prisecaru, I.

    2015-01-01

    The object of this work is the behaviour of CANDU fuel elements after service in nuclear power plant. The results are analysed and compared with previous result obtained on unirradiated samples and with the results obtained on samples irradiated in the TRIGA reactor of INR Pitesti. Zircaloy-4 is the material used for CANDU fuel sheath. The importance of studying its behaviour results from the fact that the mechanical properties of the CANDU fuel sheath suffer modifications during normal and abnormal operation. In the nuclear reactor, the fuel elements endure dimensional and structural changes as well as cladding oxidation, hydriding and corrosion. These changes can lead to defects and even to the loss of integrity of the cladding. This paper presents the results of examinations performed in the Post Irradiation Examination Laboratory (PIEL) of INR Pitesti on samples from fuel elements after they were removed out of the nuclear power plant: - dimensional and macrostructural characterization; - microstructural characterization by metallographic analyses; - determination of mechanical properties; - fracture surface analysis by scanning electron microscopy (SEM). A full set of non-destructive and destructive examinations concerning the integrity, dimensional changes, oxidation, hydriding and mechanical properties of the cladding was performed. The obtained results are typical for CANDU 6-type fuel. The obtained data could be used to evaluate the security, reliability and nuclear fuel performance, and for the improvement of the CANDU fuel. (authors)

  20. Soil pollution with trace elements at selected sites in Romania studied by instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Pantelica, A.; Carmo Freitas, M. do; Ene, A.; Steinnes, E.

    2013-01-01

    Instrumental neutron activation analysis (INAA) was used to determine concentrations of 42 elements in samples of surface soil collected at seven sites polluted from various anthropogenic activities and a control site in a relatively clean area. Elements studied were Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Eu, Fe, Gd, Hf, Hg, K, La, Lu, Mg, Mn, Mo, Na, Nd, Ni, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, U, V, W, Yb, Zn, and Zr. The results are compared with data for trace elements atmospheric deposition in lichen transplants from the same sites. The most severe soil contamination was observed at Copsa Mica from non-ferrous metallurgy. Appreciable soil contamination was also indicated at Baia Mare (non-ferrous mining and metallurgy), Deva (coal-fired power plant, cement and building materials industry), Galati (ferrous metallurgy), Magurele and Afumati (general urban pollution), and Oradea (chemical and light industries). In most cases excessive levels of toxic metals in soils matched correspondingly high values in lichen transplants. Compared to Romanian norms, legal upper limits were exceeded for Zn and Cd at Copsa Mica. Also, As and Sb occurred in excessive levels at given sites. (orig.)

  1. Soil pollution with trace elements at selected sites in Romania studied by instrumental neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pantelica, A. [Horia Hulubei National Institute for Physics and Nuclear Engineering (IFIN-HH), Magurele, Ilfov County (Romania); Carmo Freitas, M. do [Technological and Nuclear Institute (ITN), Sacavem (Portugal); Ene, A. [Dunarea de Jos Univ. of Galati (Romania). Dept. of Chemistry, Physics and Environment; Steinnes, E. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Dept. of Chemistry

    2013-03-01

    Instrumental neutron activation analysis (INAA) was used to determine concentrations of 42 elements in samples of surface soil collected at seven sites polluted from various anthropogenic activities and a control site in a relatively clean area. Elements studied were Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Eu, Fe, Gd, Hf, Hg, K, La, Lu, Mg, Mn, Mo, Na, Nd, Ni, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, U, V, W, Yb, Zn, and Zr. The results are compared with data for trace elements atmospheric deposition in lichen transplants from the same sites. The most severe soil contamination was observed at Copsa Mica from non-ferrous metallurgy. Appreciable soil contamination was also indicated at Baia Mare (non-ferrous mining and metallurgy), Deva (coal-fired power plant, cement and building materials industry), Galati (ferrous metallurgy), Magurele and Afumati (general urban pollution), and Oradea (chemical and light industries). In most cases excessive levels of toxic metals in soils matched correspondingly high values in lichen transplants. Compared to Romanian norms, legal upper limits were exceeded for Zn and Cd at Copsa Mica. Also, As and Sb occurred in excessive levels at given sites. (orig.)

  2. Preliminary study on element mass fraction determination on catfish samples from Paraguay

    International Nuclear Information System (INIS)

    Moreira, Edson G.; Catharino, Marilia G.M.; Vasconcellos, Marina B.A.; Frutos, Sixto A.; Insaurralde, Mario S.

    2013-01-01

    South American catfish (Pseudoplatystoma), commonly known in Spanish as atigrado or surubi and in Portuguese as surubim or pintado is a large fish that typically reaches 1 m long and weighs 60 kg to 80 kg and may be found at the basins of the Amazon, the Sao Francisco and de la Plata rivers, usually in riverbeds and deep wells. Being a much appreciated fish for human consumption, it is quite sought after by fishermen who have been contributing to the reduction of the stocks. This fact attracted the attention of the Paraguayan authorities to the point of imposing restrictions to free fishing and commercialization. This study aims to assist the conservation efforts towards this fish by investigating its exposure to possible pollutants. Preliminary results on element determination on six samples of catfish from Paraguayan rivers are presented. Cs, Co, Fe, Se and Zn were determined by applying an Instrumental Neutron Activation Analysis method. While these element levels were lower than the legislation for human consumption, the elements As, Cr e La were not detected in the samples as they are below the detection limit of the method employed. Atomic Absorption Spectrometry was used to investigate the presence of Cd, Hg and Pb in the samples. Hg was detected in the samples while Cd and Pb were below the detection limit of the method. (author)

  3. A Study of Interaction Patterns and Awareness Design Elements in a Massively Multiplayer Online Game

    Directory of Open Access Journals (Sweden)

    Tiffany Y. Tang

    2008-01-01

    Full Text Available Massively multiplayer online games (MMOGs have been known to create rich and versatile social worlds for thousands of millions of players to participate. As such, various game elements and advance technologies such as artificial intelligence have been applied to encourage and facilitate social interactions in these online communities, the key to the success of MMOGs. However, there is a lack of studies addressing the usability of these elements in games. In this paper, we look into interaction patterns and awareness design elements that support the awareness in LastWorld and FairyLand. Experimental results obtained through both in-game experiences and player interviews reveal that not all awareness tools (e.g., an in-game map have been fully exploited by players. In addition, those players who are aware of these tools are not satisfied with them. Our findings suggest that awareness-oriented tools/channels should be easy to interpret and rich in conveying “knowledge” so as to reduce players-cognitive overload. These findings of this research recommend considerations of early stage MMOG design.

  4. Heavy Metals and Trace Elements Atmospheric Deposition Studies in Tula Region Using Moss Biomonitors Technique

    CERN Document Server

    Ermakova, E V; Steinnes, E

    2002-01-01

    For the first time the moss biomonitors technique was used in air pollution studies in Tula Region (Central Russia), applying NAA, AAS. Moss samples were collected at 83 sites in accordance with the sampling strategy adopted in European projects on biomonitoring atmospheric deposition. A wide set of trace elements in mosses was determined. The method of epithermal neutron activation at IBR-2 reactor of FLNP JINR has made it possible to identify 33 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Br, Rb, Sr, Mo, Sb, I, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Th, U) in the large-scale concentration range - from 10000 ppm for K to 0,001 ppm for Tb and Ta. Cu, Cd and Pb were determined by the flame AAS in the Norwegian Institute of Science and Technology. Using the graphical technique and principal component analysis allowed to separate plant, crustal and general pollution components in the moss. The obtained data will be used for constructing coloured maps of the distribution of elements over t...

  5. Inorganic elements and organic compounds degradation studies by gamma irradiation in used lubricating oils

    International Nuclear Information System (INIS)

    Scapin, Marcos Antonio

    2008-01-01

    The automotive lubricating oils have partial degradation of organic compounds and addition of undesirable inorganic elements, during its use. These substances classify the used lubricating oils as dangerous and highly toxic. According to global consensus, concerning the environmental conservation, the best is to perform a reuse treatment of these lubricating oils. For this purpose, the uses of an alternative and effective technology have been sought. In this work, the efficacy and technical feasibility of the advanced oxidation process (AOP), by gamma radiation, for used automotive lubricating oil treatment has been studied. Different quantities of hydrogen peroxide and water Milli-Q were added to oil samples. They were submitted to the Cobalt-60 irradiator, type Gammacell, with 100, 200 and 500 kGy absorbed doses. The inorganic analysis by X-ray fluorescence (WDXRF) showed inorganic elements removal, mainly to sulphur, calcium, iron and nickel elements at acceptable levels by environmental protection law for oils reusing. The gas chromatography (GC/MS) analysis showed that the advanced oxidation process promotes the organic compounds degradation. The main identified compounds were tridecane, 2-methyl-naphthalene, and trietilamina-tetramethyl urea, which have important industrial applications. The multivariate analysis, Cluster Analysis, showed that advanced oxidation process application is a viable and promising treatment for used lubricating oil reusing. (author)

  6. Effect of intrusive and retraction forces in labial and lingual orthodontics: A finite element study

    Directory of Open Access Journals (Sweden)

    Rohan Mascarenhas

    2014-01-01

    Full Text Available Objectives: Lingual orthodontics differs in biomechanics as compared to labial system and has biomechanical advantages. Although theoretical approaches have explained the differences between labial and lingual orthodontics, the finite element method (FEM may be better suited to analyze these differences. This study analyzes the effect of vertical and horizontal forces together on the tooth using FEM. Materials and Methods: An extracted right maxillary central incisor was radiographed and was used to create a solid model using ANSYS. The geometric model was converted into a finite element model with the help of ANSYS software. The model consists of 27,000 elements and 30,000 nodes. Two force vectors (vertical and horizontal were applied labially and lingually at 3 different heights- 4 mm, 5 mm and 6 mm from the incisal edge. Results: In the labial system, the net force vector passes through the center of resistance (CR and brings about intrusion. The net force vector in lingual orthodontics does not pass through the center of resistance and produces lingual tipping of the incisors. Conclusion: Intrusion and retraction forces bring about tipping of incisors in lingual orthodontics. The same amount of intrusion and retraction forces brings about intrusion of incisors in labial orthodontics. Therefore, direction and amount of forces should be carefully and judiciously applied after taking into consideration the resultant biomechanical differences.

  7. Preliminary study on element mass fraction determination on catfish samples from Paraguay

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Edson G.; Catharino, Marilia G.M.; Vasconcellos, Marina B.A., E-mail: emoreira@ipen.br, E-mail: mbvascon@ipen.br, E-mail: mariliasemmler@uol.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Frutos, Sixto A.; Insaurralde, Mario S., E-mail: tony8013@hotmail.com, E-mail: insaurraldemar9@hotmail.com [Universidad Nacional de Asuncion (FCV/UNA), San Lorenzo (Paraguay). Facultad de Ciencias Veterinarias. Departamento de Pesca y Acuicultura

    2013-07-01

    South American catfish (Pseudoplatystoma), commonly known in Spanish as atigrado or surubi and in Portuguese as surubim or pintado is a large fish that typically reaches 1 m long and weighs 60 kg to 80 kg and may be found at the basins of the Amazon, the Sao Francisco and de la Plata rivers, usually in riverbeds and deep wells. Being a much appreciated fish for human consumption, it is quite sought after by fishermen who have been contributing to the reduction of the stocks. This fact attracted the attention of the Paraguayan authorities to the point of imposing restrictions to free fishing and commercialization. This study aims to assist the conservation efforts towards this fish by investigating its exposure to possible pollutants. Preliminary results on element determination on six samples of catfish from Paraguayan rivers are presented. Cs, Co, Fe, Se and Zn were determined by applying an Instrumental Neutron Activation Analysis method. While these element levels were lower than the legislation for human consumption, the elements As, Cr e La were not detected in the samples as they are below the detection limit of the method employed. Atomic Absorption Spectrometry was used to investigate the presence of Cd, Hg and Pb in the samples. Hg was detected in the samples while Cd and Pb were below the detection limit of the method. (author)

  8. Studies of biaxial mechanical properties and nonlinear finite element modeling of skin.

    Science.gov (United States)

    Shang, Xituan; Yen, Michael R T; Gaber, M Waleed

    2010-06-01

    The objective of this research is to conduct mechanical property studies of skin from two individual but potentially connected aspects. One is to determine the mechanical properties of the skin experimentally by biaxial tests, and the other is to use the finite element method to model the skin properties. Dynamic biaxial tests were performed on 16 pieces of abdominal skin specimen from rats. Typical biaxial stress-strain responses show that skin possesses anisotropy, nonlinearity and hysteresis. To describe the stress-strain relationship in forms of strain energy function, the material constants of each specimen were obtained and the results show a high correlation between theory and experiments. Based on the experimental results, a finite element model of skin was built to model the skin's special properties including anisotropy and nonlinearity. This model was based on Arruda and Boyce's eight-chain model and Bischoff et al.'s finite element model of skin. The simulation results show that the isotropic, nonlinear eight-chain model could predict the skin's anisotropic and nonlinear responses to biaxial loading by the presence of an anisotropic prestress state.

  9. Rib fractures under anterior-posterior dynamic loads: experimental and finite-element study.

    Science.gov (United States)

    Li, Zuoping; Kindig, Matthew W; Kerrigan, Jason R; Untaroiu, Costin D; Subit, Damien; Crandall, Jeff R; Kent, Richard W

    2010-01-19

    The purpose of this study was to investigate whether using a finite-element (FE) mesh composed entirely of hexahedral elements to model cortical and trabecular bone (all-hex model) would provide more accurate simulations than those with variable thickness shell elements for cortical bone and hexahedral elements for trabecular bone (hex-shell model) in the modeling human ribs. First, quasi-static non-injurious and dynamic injurious experiments were performed using the second, fourth, and tenth human thoracic ribs to record the structural behavior and fracture tolerance of individual ribs under anterior-posterior bending loads. Then, all-hex and hex-shell FE models for the three ribs were developed using an octree-based and multi-block hex meshing approach, respectively. Material properties of cortical bone were optimized using dynamic experimental data and the hex-shell model of the fourth rib and trabecular bone properties were taken from the literature. Overall, the reaction force-displacement relationship predicted by both all-hex and hex-shell models with nodes in the offset middle-cortical surfaces compared well with those measured experimentally for all the three ribs. With the exception of fracture locations, the predictions from all-hex and offset hex-shell models of the second and fourth ribs agreed better with experimental data than those from the tenth rib models in terms of reaction force at fracture (difference rib responses and bone fractures for the loading conditions considered, but coarse hex-shell models with constant or variable shell thickness were more computationally efficient and therefore preferred. Copyright 2009 Elsevier Ltd. All rights reserved.

  10. Finite element study of a lumbar intervertebral disc nucleus replacement device

    Directory of Open Access Journals (Sweden)

    Jessica S Coogan

    2016-12-01

    Full Text Available Nucleus replacement technologies are a minimally invasive alternative to spinal fusion and total disc replacement that have the potential to reduce pain and restore motion for patients with degenerative disc disease. Finite element modeling can be used to determine the biomechanics associated with nucleus replacement technologies. The current study focuses on a new nucleus replacement device designed as a conforming silicone implant with an internal void. A validated finite element model of the human lumbar L3-L4 motion segment was developed and used to investigate the influence of the nucleus replacement device on spine biomechanics. In addition, the effect of device design changes on biomechanics was determined. A 3D, L3-L4 finite element model was constructed from medical imaging data. Models were created with the normal intact nucleus, the nucleus replacement device, and a solid silicone implant. Probabilistic analysis was performed on the normal model to provide quantitative validation metrics. Sensitivity analysis was performed on the silicone Shore A durometer of the device. Models were loaded under axial compression followed by flexion/extension, lateral bending, or axial rotation. Compressive displacement, endplate stresses, reaction moment, and annulus stresses were determined and compared between the different models. The novel nucleus replacement device resulted in similar compressive displacement, endplate stress, and annulus stress and slightly higher reaction moment compared with the normal nucleus. The solid implant resulted in decreased displacement, increased endplate stress, decreased annulus stress, and decreased reaction moment compared with the novel device. With increasing silicone durometer, compressive displacement decreased, endplate stress increased, reaction moment increased, and annulus stress decreased. Finite element analysis was used to show that the novel nucleus replacement device results in similar biomechanics

  11. Quality Assurance of Cancer Study Common Data Elements Using A Post-Coordination Approach.

    Science.gov (United States)

    Jiang, Guoqian; Solbrig, Harold R; Prud'hommeaux, Eric; Tao, Cui; Weng, Chunhua; Chute, Christopher G

    2015-01-01

    Domain-specific common data elements (CDEs) are emerging as an effective approach to standards-based clinical research data storage and retrieval. A limiting factor, however, is the lack of robust automated quality assurance (QA) tools for the CDEs in clinical study domains. The objectives of the present study are to prototype and evaluate a QA tool for the study of cancer CDEs using a post-coordination approach. The study starts by integrating the NCI caDSR CDEs and The Cancer Genome Atlas (TCGA) data dictionaries in a single Resource Description Framework (RDF) data store. We designed a compositional expression pattern based on the Data Element Concept model structure informed by ISO/IEC 11179, and developed a transformation tool that converts the pattern-based compositional expressions into the Web Ontology Language (OWL) syntax. Invoking reasoning and explanation services, we tested the system utilizing the CDEs extracted from two TCGA clinical cancer study domains. The system could automatically identify duplicate CDEs, and detect CDE modeling errors. In conclusion, compositional expressions not only enable reuse of existing ontology codes to define new domain concepts, but also provide an automated mechanism for QA of terminological annotations for CDEs.

  12. Process development for elemental recovery from PGM tailings by thermochemical treatment: Preliminary major element extraction studies using ammonium sulphate as extracting agent.

    Science.gov (United States)

    Mohamed, Sameera; van der Merwe, Elizabet M; Altermann, Wladyslaw; Doucet, Frédéric J

    2016-04-01

    Mine tailings can represent untapped secondary resources of non-ferrous, ferrous, precious, rare and trace metals. Continuous research is conducted to identify opportunities for the utilisation of these materials. This preliminary study investigated the possibility of extracting major elements from South African tailings associated with the mining of Platinum Group Metals (PGM) at the Two Rivers mine operations. These PGM tailings typically contain four major elements (11% Al2O3; 12% MgO; 22% Fe2O3; 34% Cr2O3), with lesser amounts of SiO2 (18%) and CaO (2%). Extraction was achieved via thermochemical treatment followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. The thermochemical treatment step used ammonium sulphate, a widely available, low-cost, recyclable chemical agent. Quantification of the efficiency of the thermochemical process required the development and optimisation of the dissolution technique. Dissolution in water promoted the formation of secondary iron precipitates, which could be prevented by leaching thermochemically-treated tailings in 0.6M HNO3 solution. The best extraction efficiencies were achieved for aluminium (ca. 60%) and calcium (ca. 80%). 35% iron and 32% silicon were also extracted, alongside chromium (27%) and magnesium (25%). Thermochemical treatment using ammonium sulphate may therefore represent a promising technology for extracting valuable elements from PGM tailings, which could be subsequently converted to value-added products. However, it is not element-selective, and major elements were found to compete with the reagent to form water-soluble sulphate-metal species. Further development of this integrated process, which aims at achieving the full potential of utilisation of PGM tailings, is currently underway. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. A study of element migration in the Maqarin site (Jordan) by the means of column experiments: II. trace elements (Cr, Se, Mo, Re)

    International Nuclear Information System (INIS)

    Trotignon, L.; Bienvenu, P.; Provitina, O.; Rose, J.; Khoury, H.; Trocellier, P.; Mercier, F.; Raimbault, L.

    2005-01-01

    Full text of publication follows: The site of Maqarin (Jordan), in which natural cements occur as a result of the combustion metamorphism of a bio-micrite, is studied since 1989 as a natural analogue for the long term evolution of a cementitious repository environment [1]. Several trace elements of interest (Cr, Se, Mo, Re) are mobilized on this site by percolating groundwaters and migrate along high pH plumes. Laboratory scale column experiments were conducted in which crushed materials (cement, bio-micrite) collected on site were submitted to leaching by deionized water or Ca(OH) 2 equilibrated solutions. The evolution of Cr, Mo, Se and Re was monitored in leachates during the experiments. Characterizations of the solid phase using several techniques were also conducted in order to locate these elements in the mineral phases. Comparison of experimental data with records of trace element concentration in Maqarin groundwaters gives some insight on Re, Cr, Se and Mo sources and sinks in this environment. Both the imprint of the past combustion event and present day redox transformations explain several features of the datasets. However, due to the high complexity of the cements, in which trace elements are often distributed among several mineral phases, it is presently not possible to link in a straightforward way individual mineral dissolution processes and trace element signals in waters. [1] Khoury H. N., Salameh E., Clark I. D., Fritz P., Bajjali W., Milodowski A. E., Cave M. R. and Alexander W. R. 1992. A natural analogue of high pH cement pore waters from the Maqarin area of northern Jordan. I: Introduction to the site. J. Geochem. Explor. 46: 117-132. (authors)

  14. Contributions to multiple element speciation in vegetable plants: Studies on the type of bonding of numerous elements, particularly zinc and cadmium

    International Nuclear Information System (INIS)

    Guenther, K.

    1997-03-01

    In the first part of the study, the total contents and the solubility characteristics of Zn, Cd, Fe, Mn, Cu, Ca, Sr, K and Rb in 26 different vegetable plants, the majority of them commercially available, are reported, obtained by post-decomposition analyses. The data are given for avocados, bananas, cauliflower, chicory, Chinese cabbage, dill, ice lettuce (two specimens), endive, field salad, cucumbers, kohlrabi, lettuce, chard beet, carrots, peppers, leek, radish, red cabbage, loose leaved lettuce, celery (two specimens), spinach, topinambur, white cabbage, and parsley. Cell decomposition was done by treatment of the plant material with an electric dispersing apparatus (Ultra-Turrax) in buffer solution (liquid shearing). The homogenates were separated into supernatants (cytosoles)and pellets by means of centrifugation. Cell decomposition of the plants by crushing with quartz sand after lyophilization (solid shearing) required much more technical effort and for some elements created problems with the blind values. At least 50% on the average of the elements Zn, Cd, Rb, and K could be transferred to the solutions by the dispersing treatment with Ultra-Turrax. In many cases, the cytosole-borne detectable contents of these 5 elements were above 70%. The solubility of Zn and Cd was more strongly dependent on the plant species than that of Cu, Rb, and K. All five elements thus can be analysed by conventional methods for further enhanced speciation. Mn, Ca, and especially Fe and Sr for the most part were found to be bonded to solid cell constituents. However, the solubility characteristics of Ca and Mn and Sr in particular was very homogeneous. In some plants, the contents of Mn and Sr in the cytosoles was approx. 90%, so that comprehensive speciation of these elements is possible. (orig./AJ) [de

  15. Application of the Elements of Problem-Based Learning in Professional Foreign Language Studies at LUHS

    Directory of Open Access Journals (Sweden)

    Liudmila Kirikova

    2014-06-01

    Full Text Available The increasing significance of science and the new ties with foreign countries affect the education and training of specialists. Continuous updating of specialty knowledge and the possibility to read the most recent scientific literature in a foreign language and to participate in joint conferences together with foreign partners require the education and training of specialists who would be capable of cooperating in scientific and professional activity while fluently communicating in a foreign language. The aim of the study was to reveal the peculiari- ties of the expression of problem-based learning (PBL elements in foreign language studies at Lithuanian University of Health Sciences (LUHS. The results of the pedagogical experiment conducted at LUHS when teaching the foreign language module showed that the application of PBL elements stimulated the formation of students’ deep approach to studies and skills of independent work. The use of group learning aim forma - tion, concept maps, problem solving, discussion, group work, and brainstorming techniques had a significant effect on the students, and allowed for their empowerment for successful studies.

  16. LIBS: study of elemental profile of different layers of the optical window of Tokamak

    International Nuclear Information System (INIS)

    Maurya, Gulab Singh; Jyotsna, Aradhana; Rai, Awadhesh Kumar; Ajai Kumar

    2012-01-01

    In the Tokamak, during confinement of plasma, impurities are deposited on optical window, mirror, limiters, etc. of the tokamak. Thus a layer of impurity on the surface of the optical window causes less visibility which creates problem in the study of plasma parameters and other diagnostics of the plasma generated in the tokamak. Laser Induced Breakdown Spectroscopy (LIBS) is a useful atomic spectroscopic technique for analysis of materials in any phase (Solid, Liquid, Gas etc). LIBS spectra of optical window have been recorded in the spectral range of 200-500 nm. In present study we have focused laser on the surface of the window, to study the layer-wise elemental profile of optical window, we have recorded the LIBS spectra with increasing number of laser shots on the same point of the window. In first laser shot, spectral signature of Cr, Fe, and Ni etc. are present in the LIBS spectra, which is related with the impurity but after five to six laser shots at the same point of the optical window spectral signature Si, B are observed which is related to the glass material. Thus our study demonstrates the capability of LIBS as an in-situ monitoring tool for detection of elemental profile in different layers of optical window of the Tokamak. (author)

  17. Using rare earth element tracers and neutron activation analysis to study rill erosion process

    International Nuclear Information System (INIS)

    Li Mian; Li Zhanbin; Ding Wengfeng; Liu Puling; Yao Wenyi

    2006-01-01

    Spatially averaged soil erosion data provide little information on the process of rill erosion. The dynamically varied data on the temporal and spatial distributions in the rill erosion process are needed to better understand the erosion process and reveal its innate characteristics. The objectives of this study were to examine the feasibility and effectiveness of rare earth element (REE) tracers and the neutron activation analysis (NAA) method on the study of the rill erosion process and to reveal quantitatively the relationships and characteristics of temporal and spatial distributions of sediment yield in rill erosion. Four REEs were used to study the changeable process of rill erosion at 4 slope positions. Four water inflow rates were applied to a 0.3x5 m soil bed at 3 slopes of 10.5%, 15.8% and 21.2% in scouring experiments. All of the runoff was collected in the experiment. Each sample was air-dried and well mixed. Then 20 g of each sample was sieved through 100-mesh and about a 50 mg sample was weighed for analysis of the four elemental compositions by NAA. Results indicate that the REE tracers and NAA method can be used to not only quantitatively determine soil erosion amounts on different slope segments, but also to reveal the changeable process of rill erosion amount. All of the relative errors of the experimental results were less than 25%, which is considered satisfactory on the study of rill erosion process

  18. Using rare earth element tracers and neutron activation analysis to study rill erosion process

    Energy Technology Data Exchange (ETDEWEB)

    Li Mian [Yellow River Institute of Hydraulic Research, Yellow River Conservancy Commission, Key Laboratory of Yellow River Sediment Research of Ministry of Water Resources, Shunhelu 45, Zhengzhou, Henan 450003 (China)]. E-mail: hnli-mian@163.com; Li Zhanbin [Xi' an University of Technology, Xi' an, Shaanxi 710048 (China); Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of Water Resources, Yangling, Shaanxi 712100 (China); Ding Wengfeng [Institute of Soil and Water Conservation, Yangtse River' s Scientific Research Institute, Wuhan, Hubei 430010 (China); Liu Puling [Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of Water Resources, Yangling, Shaanxi 712100 (China); Yao Wenyi [Yellow River Institute of Hydraulic Research, Yellow River Conservancy Commission, Key Laboratory of Yellow River Sediment Research of Ministry of Water Resources, Shunhelu 45, Zhengzhou, Henan 450003 (China)

    2006-03-15

    Spatially averaged soil erosion data provide little information on the process of rill erosion. The dynamically varied data on the temporal and spatial distributions in the rill erosion process are needed to better understand the erosion process and reveal its innate characteristics. The objectives of this study were to examine the feasibility and effectiveness of rare earth element (REE) tracers and the neutron activation analysis (NAA) method on the study of the rill erosion process and to reveal quantitatively the relationships and characteristics of temporal and spatial distributions of sediment yield in rill erosion. Four REEs were used to study the changeable process of rill erosion at 4 slope positions. Four water inflow rates were applied to a 0.3x5 m soil bed at 3 slopes of 10.5%, 15.8% and 21.2% in scouring experiments. All of the runoff was collected in the experiment. Each sample was air-dried and well mixed. Then 20 g of each sample was sieved through 100-mesh and about a 50 mg sample was weighed for analysis of the four elemental compositions by NAA. Results indicate that the REE tracers and NAA method can be used to not only quantitatively determine soil erosion amounts on different slope segments, but also to reveal the changeable process of rill erosion amount. All of the relative errors of the experimental results were less than 25%, which is considered satisfactory on the study of rill erosion process.

  19. Physical--chemical studies of transuranium elements. Progress report, April 1, 1977--March 31, 1978

    International Nuclear Information System (INIS)

    Peterson, J.R.

    1978-01-01

    Major advances in our continuing program to determine, interpret, and correlate the basic chemical and physical properties of the transuranium elements are summarized for the period April 1, 1977, through March 31, 1978. CfCl 2 , EsCl 2 , EsBr 2 , and EsI 2 were synthesized and characterized spectrophotometrically, as were several mixed-valence lanthanide-actinide halides (e.g., GdCf 4 Cl 11 ) and CmF 4 , CfF 4 , and EsF 3 . All samples not containing einsteinium were also examined by X rays. Studies of the chemical consequences of the radioactive decay series 253 Es alpha decaying to 249 Bk beta decaying to 249 Cf have continued and expanded. Elemental Cm-248 has been prepared on the one-half milligram scale and used to synthesize CmP and CmSb. Single crystals of AmTe 2 and AmSe 2 have been grown from a Te melt and by iodine transport, respectively. Our SQUID magnetometer was tested successfully in a preliminary configuration, and the expected sensitivity of the device was confirmed. A new design for the flux sensing coils was incorporated prior to an apparatus calibration experiment with lead. A porous vitreous carbon material was found to make a useful optically transparent electrode for simultaneous electrochemical and absorption spectroscopic investigations. Cyclic voltammograms of UO 2 2+ were obtained prior to a spectroelectrochemical study of the radiation of UO 2 2+ . The major obstacle in our solution microcalorimetry program was overcome by the realization of a leak-free sample container. Calorimeter performance now warrants experiments with transuranium element samples. The electrochemical reductions of Cf(III) and Es(III) have been studied by polarography and/or cyclic voltammetry. The results suggest that both are reduced to the divalent state before being reduced to the amalgam

  20. Study of the elemental composition of saliva of smokers and nonsmokers by X-ray fluorescence

    International Nuclear Information System (INIS)

    Poles, Antônio A.; Balcão, Victor M.; Chaud, Marco V.; Vila, Marta M.D.C.; Aranha, Norberto; Yoshida, Valquíria M.H.; Oliveira, José M.

    2016-01-01

    Cigarette smoking is a serious public health problem. According to data from the World Health Organization, it is estimated that currently more than 1.2 billion people worldwide do tobacco use and that smoking-related diseases are responsible for about 6 million deaths each. With attention to this, it is necessary to seek preventive and prognostic of trying to reduce these numbers and alert the public in general about the danger and the harm caused by its use. Thus, the objective of the research work undertaken was to evaluate and compare the chemical composition of collected saliva samples of smokers and nonsmokers by X-ray Fluorescence analyses. 32 individuals were selected, 16 of which used cigarette on a daily basis and the other 16 had never smoked. Saliva was collected with the help of a (sterile) disposable Pasteur pipette and samples sent to the Applied Nuclear Physics Laboratory at UNISO (LAFINAU), where analyzes were carried out. Individuals who agreed to participate in the study answered a questionnaire to define their profile of inclusion and signed an informed consent form (CEP Protocol no. 831.753 of 09/10/2014). The results clearly showed that there are differences in the concentrations of chemical elements in the saliva of smokers and non-smokers. The biggest discrepancies were found at concentrations of the chemical elements Sulfur, Phosphorus, Chlorine and Potassium, and smaller differences in the concentration of the elements Calcium, Manganese, Iron, Copper, Titanium, Vanadium and Nickel. In only one saliva sample, and in quite low amounts, arsenic was detected. The results indicate that smoking produces more significant changes in the saliva of women than in men, increasing the concentration of some elements in the saliva of female smokers, much more than in the male smokers. The cigarette usage time also appears to exert a greater influence on the composition of the saliva of women than in men, indicating that the damage caused by cigarette

  1. Food authenticity studies via multi-elemental and isotopic pattern using inductively coupled plasma mass spectrometry

    International Nuclear Information System (INIS)

    Katona, R.; Brunner, M.; Abranko, L.; Prohaska, T.; Stefanka, Z.

    2009-01-01

    Full text: The aim of our study has been the development of an analytical method based on Sr isotope and elemental fingerprint analysis for discriminating food samples from different geographical origin. Several types of foods were involved in the investigation representing different stages of food processing such as pulverized spicy paprika (sparsely processed food product) and wine samples (processed product). Independent inorganic mass spectrometric techniques like ICP-SFMS, ICP-CCMS, and MC-ICPMS were used for method validation and investigation of the geographical origin. The advantage and limitations of the developed methods are discussed critically. (author)

  2. Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

    OpenAIRE

    X. Z. Zhu; G. Wang; Y. D. He; Z. F. Cheng

    2013-01-01

    There is a special circumfluence in the center region of cross-section for a tri-screw extruder. To study the effect of the dynamic center region on the flow and mixing mechanism of the tri-screw extruder, 2D finite element modeling was used to reduce the axial effects. Based on the particle tracking technology, the nonlinear dynamics of a typical particle motions in the center region was carried out and the mixing process in the tri-screw extruder was analyzed with Poincaré maps. Moreover, m...

  3. Finite Element Modelling of the Indo-Gangetic Basin to Study Site Amplification

    Science.gov (United States)

    Sivasubramonian, J.; Jaya, D.; Raghukanth, S. T. G.; Mai, P. M.

    2017-12-01

    We have developed a finite-element model of the 3D velocity structure of the Indo-Gangetic basin (IG basin) to quantify site amplifications due to seismic waves emanated from regional earthquakes. Estimating seismic wave amplifications is difficult in case of limited instrumentation, thus motivating us to propose a new simulation-based approach. The input required for the finite-element model include the spatial coordinates and the material properties (density, P-wave and S-wave velocities, Q factor) of the basin. Recent studies in the basin demarcate sediment layers of varying thickness, reaching down to a depth of 6 km and S-wave velocities ranging from 0.4-2.4 km/s (Srinivas et al., 2013). In the present study, our regional model has dimensions 900 x 900 x 80 km in x, y and z directions, discretized into 320 x 320 x 53 hexahedral elements. The top 6 km of the IG basin is divided into 8 different sediment layers with varying material properties. We use kinematic rupture models for the earthquake sources to simulate past as well as hypothetical future events. Two past earthquakes (Mw4.9, Delhi; Mw5.2, Chamoli) and two hypothetical earthquakes (Mw7.1; Mw8.5) are considered in our study. The rupture plane dimensions (L and W) and the slip distribution are estimated using the method of Mai and Beroza (2002). Based on focal-mechanism solutions and the depths of seismicity, we define the strike (580, 3090), the dip (650, 210), the rake (160, 770), and the depth of top edge of fault (5 km, 19 km) for the two large hypothetical earthquakes. Based on these parameters, the Centroid Moment Tensor (CMT) solution of the source is obtained. Ground motions are then simulated by solving the three-dimensional wave equation using the spectral element method (Komatitsch and Tromp, 1999). The key observations from our results are: 1) basin amplification factors for Peak Ground Velocity (PGV) are twice as high as Peak Ground Displacement (PGD) 2) PGV amplifications are as high as a

  4. Study of osteoporosis through the measurement of bone density, trace elements, biomechanical properties and immunocytochemicals

    International Nuclear Information System (INIS)

    Aras, N.K.; Korkusuz, F.; Akkas, N.; Laleli, Y.; Kuscu, L.; Gunel, U.

    1996-01-01

    Osteoporosis is defined as an absolute decrease in the amount of bone to a level below required for mechanical support. It is an important bone disease in elderly people in many countries. Unfortunately, there is no reliable statistical data in Turkey for the incidence of osteoporosis. A decrease in bone mass is the important cause in fractures in osteoporosis. Therefore, we intend to study both bone density and other variables such as trace elements, biomechanical properties and other immunocytochemicals in bone, all combined might give an information about the cause and prevention of osteoporosis. (author)

  5. radiochemical studies on the binding of humic materials with toxic elements and compounds

    International Nuclear Information System (INIS)

    Afifi, D.M.I.

    2001-01-01

    industrial nations produce several billion tons of waste every year . this figure will increase as both population and industrial growth increase. there are many kinds of waste, including refinery waste, which consists of hydrocarbons, heavy metals, metal catalysts and caustic solution; dredge spoils, some of which are highly polluted and cntains substances potentially hazardous to human health or the marine ecosystem; chemical waste such as insecticides, pesticides, other complex chemicals and heavy metals; radioactive waste and agricultural waste, anmd most of them are extremely hazardous and harmful to the marine ecosystem and its inhabitants.the aim of this thesis is to study the binding of humic materials with toxic elements and compounds

  6. Vaporization studies on elemental tellurium and selenium by Knudsen effusion mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Viswanathan, R., E-mail: rvis1953@gmail.com; Balasubramanian, R., E-mail: rbs@igcar.gov.in; Darwin Albert Raj, D., E-mail: darwinalbertraj1953@gmail.com; Sai Baba, M., E-mail: msb@igcar.gov.in; Lakshmi Narasimhan, T.S., E-mail: tslak@igcar.gov.in

    2014-08-01

    Highlights: • A detailed KEMS study of vaporization of elemental tellurium and selenium systems. • Clusters Te{sub i}(g) (i = 2 to 7) and Se{sub i}(g) (i = 2 to 9) identified over Te(s) and Se(s). • p–T relations for Te{sub i}(g) (590 to 690 K) and Se{sub i}(g) (380 to 480 K). • Vapor phase of Te dominated by Te{sub 2}(g) (∼95%) while that of Se by Se{sub 6}(g) (∼50%) and Se{sub 5}(g) (∼25%). • Sublimation and atomization enthalpies deduced for Te{sub i}(g) and Se{sub i}(g). - Abstract: Vaporization studies on elemental tellurium and selenium were conducted by Knudsen effusion mass spectrometry in the temperature range of 590–690 K and 380–480 K, respectively. The ionic species Te{sub i}{sup +} (i = 1–7) and Se{sub i}{sup +}(g) (i = 1–9) were detected in the mass spectra over these two condensed phases. Measurement of ion intensities were performed as a function of electron impact energy and as a function of temperature (at different electron impact energies) for identifying the gaseous precursor species as well as for determining the partial pressure–temperature relations and sublimation enthalpies for these species. While the major species over elemental tellurium was confirmed to be Te{sub 2}(g) (with all other gaseous species Te{sub 3}–Te{sub 7} put together constituting less than 5%), the major species over elemental selenium was found to be Se{sub 6}(g), closely followed by Se{sub 5}(g) (with other gaseous species Se{sub 2}–Se{sub 4} and Se{sub 7}–Se{sub 9} put together also moderately constituting ∼25%). From the partial pressures, the thermodynamic data for the sublimation reactions i Te(s) = Te{sub i}(g) and i Se(s) = Se{sub i}(g) were deduced by second- and third-law methods. The atomization enthalpies of tellurium and selenium clusters were also deduced by using the recommended enthalpies of formation of monomeric species. Comparison of the findings obtained in the present study with those in previous studies revealed

  7. Trace element studies in bioenvironmental samples using 3-MeV protons

    International Nuclear Information System (INIS)

    Walter, R.L.; Willis, R.D.; Gutknecht, W.F.

    1974-01-01

    Trace metal compositions of a wide range of biological, environmental, medical and clinical samples were investigated using proton-induced x-ray emission analysis (PIXEA). The x-rays were detected with a Si(Li) detector and spectra from over 3000 irradiations have been recorded on magnetic tape. The chi 2 fitting code TRACE developed at our laboratory was used in a semi-automatic mode to extract abundances of elements from S to Cd. Various methods of overcoming analytical problems and specimen preparation difficulties are reported. Results from some samples for typical studies are illustrated along with the reasons for interest in the sample types

  8. Finite Element and Experimental Study of Shunting in Resistance Spot Welding

    DEFF Research Database (Denmark)

    Seyyedian Choobi, M.; Nielsen, C. V.; Bay, N.

    2015-01-01

    This research is focused on one of the problems frequently encountered in spot welding in industry. In many applications several spot welds are made close to each other. The spots made after the first spot may become smaller in size due to shunt effect. A numerical and experimental study has been...... conducted to investigate the effect of shunting on nugget size in spot welding of HSLA steel sheets. Different cases with different spacing between weld spots have been examined. The nugget sizes have been measured by metallographic examination and have been compared with 3D finite element simulations...

  9. Media mix elements affecting brand equity: A study of the Indian passenger car market

    Directory of Open Access Journals (Sweden)

    Tanmay Chattopadhyay

    2010-12-01

    Full Text Available The study develops and empirically tests a model for finding the effect of advertising frequency across different media vehicles towards building brand equity for the passenger car market for first time and repeat buyers. The effect that selected media mix elements had on the dimensions of brand equity was examined. First time buyers are expected to have lower category knowledge than repeat buyers, and are hence expected to behave differently from repeat buyers. Since the knowledge structures of these two groups are expected to be different, it is reasonable to predict that they would process product/brand related information differently and this is corroborated by the results.

  10. Aerodynamic and thermal studies of cans of gas cooled fuel elements; Etudes aerodynamiques et thermiques de gaines d'elements combustibles refroidis par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Gelin, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Milliat, J P [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    Research on clusters was undertaken at the CEA in 1959, while studies on herring-bone cans were developed at the EDF Laboratory at Chatou and the CEA laboratory at Saclay at the end of 1959. In 1962, a general study on corrugations was begun at the Saclay Laboratory with a view to improving the clusters, and continued later in both laboratories relative to the internal cooling of annular fuel elements. As these studies progressed, trial facilities were extended while experimental methods have improved constantly. At the present time, both laboratories, working in complete collaboration, have powerful means at their disposal. Work on the clusters has been concerned chiefly with pressure losses due to the assembly parts, and with the temperature variations around the elements of the cluster. In this way, we have been able to determine satisfactorily the hot points of the can, the deformations of the rods and the conditions of stability of these deformations. In the case of the herring-bone cans, studies have been directed to the evolution of performances as a function of the geometric parameters on the one hand, and to the special aerodynamic and thermal features caused by the fins and by interruptions of cartridge on the other hand. These studies have led to a very thorough knowledge of the cartridges chosen for the reactors EDF 2 and EDF 3, and now open up very hopeful prospects for future reactors, particularly those fitted with annular elements; among the alternatives suitable for the inner surface of the annular element can, corrugations and longitudinal fins have been fairly extensively tested over a wide range of Reynolds number. (authors) [French] Les etudes de grappes ont ete entreprises au C.E.A. en 1959, tandis que les etudes de gaines a chevrons se sont developpees au Laboratoire de Chatou de l'EDF et au Laboratoire de Saclay du C.E.A. a la fin de l'annee 1959. En 1962, une etude generale sur les corrugations a ete commencee au Laboratoire de Saclay pour

  11. Parametric study of the low-enriched uranium integrated Fort-Saint-Vrain element; comparative evaluation with the interacting tubular element

    International Nuclear Information System (INIS)

    Cerles, J.M.; Carvallo, G.; Vallepin, C.

    1971-11-01

    This paper presents a study of the influence of the different geometric and neutronic parameters on the calculation of the cycle with low-enriched uranium in a Fort-Saint-Vrain type brick. The study is divided in two parts: a stage of physics, essentially neutronics; an economical part where the costs are taken into account. At the level of studies of neutronics and costs, a parallel comparison is developed between the brick Fort-Saint-Vrain and the interacting tubular element, and even thorium. 6 refs. 29 figs [fr

  12. Preliminary study of elemental mass size distribution of urban aerosol collected in Debrecen

    International Nuclear Information System (INIS)

    Kertesz, Zs.; Borbely-Kiss, I.; Kiss, A.Z.; Koltay, E.; Szabo, Gy.

    2000-01-01

    peak appeared in the 8-16 μm and in the 16-30 μm size fraction. The size distribution of these was very similar in both periods, although in summer there is a tendency towards smaller aerodynamic diameters. The mass size distribution of the elements S, K, Cl, Zn, Cu has two modes: one peak occurs between 0.25 and 0.5 μm, the coarse particles has a peak around 16 μm. Usually an indication of a third peak appears in the 1-2 μm size fraction. This can be mainly observed in the samples collected in the winter period. In the case of Cl we observed a coarse and a condensation peak in winter, in summer only a condensation peak appeared. The distribution of K has a bimodial shape (originates from biomass burning and from soil), but there is no significant difference between the summer and winter concentrations, on the contrary as it should have been expected. This is a preliminary study, we plan to carry on campaign samplings with the PCI, and usual sampling with the streaker sampler. (author)

  13. Scale factor management in the studies of affine models of shockproof garment elements

    Directory of Open Access Journals (Sweden)

    Denisov Oleg

    2018-01-01

    Full Text Available New samples of protective garment for performing construction work at height require numerous tests in conditions close to real conditions of extreme vital activity. The article presents some results of shockproof garment element studies and a description of a patented prototype. The tests were carried out on a model which geometric dimensions were convenient for manufacturing it in a limited batch. In addition, the used laboratory equipment (for example, a unique power pendulum, blanks made of a titanium-nickel alloy with a shape memory effect also imposed their limitations. The problem of the adequacy of the obtained experimental results transfer to mass-produced products was solved using tools of the classical similarity theory. Scale factor management influence in the affine modeling of the shockproof element, studied on the basis of the equiatomic titanium-nickel alloy with the shape memory effect, allowed us to assume, with a sufficient degree of reliability, the technical possibility of extrapolating the results of experimental studies to full-scale objects for the formation of the initial data of the mathematical model of shockproof garment dynamics elastoplastic deformation (while observing the similarity of the features of external loading.

  14. Scale factor management in the studies of affine models of shockproof garment elements

    Science.gov (United States)

    Denisov, Oleg; Pleshko, Mikhail; Ponomareva, Irina; Merenyashev, Vitaliy

    2018-03-01

    New samples of protective garment for performing construction work at height require numerous tests in conditions close to real conditions of extreme vital activity. The article presents some results of shockproof garment element studies and a description of a patented prototype. The tests were carried out on a model which geometric dimensions were convenient for manufacturing it in a limited batch. In addition, the used laboratory equipment (for example, a unique power pendulum), blanks made of a titanium-nickel alloy with a shape memory effect also imposed their limitations. The problem of the adequacy of the obtained experimental results transfer to mass-produced products was solved using tools of the classical similarity theory. Scale factor management influence in the affine modeling of the shockproof element, studied on the basis of the equiatomic titanium-nickel alloy with the shape memory effect, allowed us to assume, with a sufficient degree of reliability, the technical possibility of extrapolating the results of experimental studies to full-scale objects for the formation of the initial data of the mathematical model of shockproof garment dynamics elastoplastic deformation (while observing the similarity of the features of external loading).

  15. A study on the improvement of shape optimization associated with the modification of a finite element

    International Nuclear Information System (INIS)

    Sung, Jin Il; Yoo, Jeong Hoon

    2002-01-01

    In this paper, we investigate the effect and the importance of the accuracy of finite element analysis in the shape optimization based on the finite element method and improve the existing finite element which has inaccuracy in some cases. And then, the shape optimization is performed by using the improved finite element. One of the main stream to improve finite element is the prevention of locking phenomenon. In case of bending dominant problems, finite element solutions cannot be reliable because of shear locking phenomenon. In the process of shape optimization, the mesh distortion is large due to the change of the structure outline. So, we have to raise the accuracy of finite element analysis for the large mesh distortion. We cannot guarantee the accurate result unless the finite element itself is accurate or the finite elements are remeshed. So, we approach to more accurate shape optimization to diminish these inaccuracies by improving the existing finite element. The shape optimization using the modified finite element is applied to a two and three dimensional simple beam. Results show that the modified finite element has improved the optimization results

  16. Feasibility study of power reactor fuel elements factory development: I. Economical aspects

    International Nuclear Information System (INIS)

    Marwoto; Ratih-Langenati, R.R.; Susanti, P.

    1996-01-01

    For determining the feasibility study on manufacturing nuclear fuel element from economical aspect point of view, it necessary to fix its capacity which it was found from fuel element reloading requirement for nuclear power plat (PLTN). NEWJEC report which use as a base in this study that is possibly of a complex of NPP as big as 7200 MW in Muria region. If the capacity factor is 80 %, the reload requirement is therefore become from 120 to 142 tons uranium every year. So, its considered to fix the nominal capacity of a fabric for nuclear fuel element manufacturing as much as 200 tons-U per year with economical lifetimes of 20 years. NEWJEC data show, for manufacturing capacity of 200 tons-U per year with, plant have a fixed capital investment of US$ 43.9 million. With working capital as much as 15 % correspond to fixed capital investment (FCI); 10 % of interest rate; US$ 17 million of fixed cost; US$ 106.2/kg-U of variable production cost, its calculated that break even point/BEP is 50 % for price of nuclear fuel is US$ 350/kg-U without uranium cost. On this economic condition, it was found that the return on investment/ROI is 20.2 %; the internal rate of return/IRR is 11.2 % and the benefit cost ration/BCR is 1.22. For all of above, it was assumed that such nuclear fuel element manufacturing service will be operate in the year of 2012. Some of NEWJEC data have been revised, there were the value of FCI; cost of salary; the value in percent of working capital/WC; the cost of non-uranium materials and the price of product service are US$ 68 million; US$ 4.1 million; 30 %; US$ 100/kg-U and US$ 370/kg-U respectively, where the new data appear as higher than old date from NEWJEC, excluding the cost of salary. For all new economical data in the latest, we found that 45 %; 16.73 %; 11.8 % and 1.25 for BEB; IRR and BCR respectively

  17. Theoretical Studies of the Electronic Structure of the Compounds of the Actinide Elements

    International Nuclear Information System (INIS)

    Kaltsoyannis, Nikolas; Hay, P.J.; Li, Jun; Blaudeau, Jean-Philippe; Bursten, Bruce E.

    2006-01-01

    In this chapter, we will present an overview of the theoretical and computational developments that have increased our understanding of the electronic structure of actinide-containing molecules and ions. The application of modern electronic structure methodologies to actinide systems remains one of the great challenges in quantum chemistry; indeed, as will be discussed below, there is no other portion of the periodic table that leads to the confluence of complexity with respect to the calculation of ground- and excited-state energies, bonding descriptions, and molecular properties. But there is also no place in the periodic table in which effective computational modeling of electronic structure can be more useful. The difficulties in creating, isolating, and handling many of the actinide elements provide an opportunity for computational chemistry to be an unusually important partner in developing the chemistry of these elements. The importance of actinide electronic structure begins with the earliest studies of uranium chemistry and predates the discovery of quantum mechanics. The fluorescence of uranyl compounds was observed as early as 1833, a presage of the development of actinometry as a tool for measuring photochemical quantum yields. Interest in nuclear fuels has stimulated tremendous interest in understanding the properties, including electronic properties, of small actinide-containing molecules and ions, especially the oxides and halides of uranium and plutonium. The synthesis of uranocene in 1968 led to the flurry of activity in the organometallic chemistry of the actinides that continues today. Actinide organometallics (or organoactinides) are nearly always molecular systems and are often volatile, which makes them amenable to an arsenal of experimental probes of molecular and electronic structure (Marks and Fischer, 1979). Theoretical and computational studies of the electronic structure of actinide systems have developed in concert with the experimental

  18. Feasibility of Combining Common Data Elements Across Studies to Test a Hypothesis.

    Science.gov (United States)

    Corwin, Elizabeth J; Moore, Shirley M; Plotsky, Andrea; Heitkemper, Margaret M; Dorsey, Susan G; Waldrop-Valverde, Drenna; Bailey, Donald E; Docherty, Sharron L; Whitney, Joanne D; Musil, Carol M; Dougherty, Cynthia M; McCloskey, Donna J; Austin, Joan K; Grady, Patricia A

    2017-05-01

    The purpose of this article is to describe the outcomes of a collaborative initiative to share data across five schools of nursing in order to evaluate the feasibility of collecting common data elements (CDEs) and developing a common data repository to test hypotheses of interest to nursing scientists. This initiative extended work already completed by the National Institute of Nursing Research CDE Working Group that successfully identified CDEs related to symptoms and self-management, with the goal of supporting more complex, reproducible, and patient-focused research. Two exemplars describing the group's efforts are presented. The first highlights a pilot study wherein data sets from various studies by the represented schools were collected retrospectively, and merging of the CDEs was attempted. The second exemplar describes the methods and results of an initiative at one school that utilized a prospective design for the collection and merging of CDEs. Methods for identifying a common symptom to be studied across schools and for collecting the data dictionaries for the related data elements are presented for the first exemplar. The processes for defining and comparing the concepts and acceptable values, and for evaluating the potential to combine and compare the data elements are also described. Presented next are the steps undertaken in the second exemplar to prospectively identify CDEs and establish the data dictionaries. Methods for common measurement and analysis strategies are included. Findings from the first exemplar indicated that without plans in place a priori to ensure the ability to combine and compare data from disparate sources, doing so retrospectively may not be possible, and as a result hypothesis testing across studies may be prohibited. Findings from the second exemplar, however, indicated that a plan developed prospectively to combine and compare data sets is feasible and conducive to merged hypothesis testing. Although challenges exist in

  19. Finite element model to study temperature distribution in skin and deep tissues of human limbs.

    Science.gov (United States)

    Agrawal, Mamta; Pardasani, K R

    2016-12-01

    The temperature of body tissues is viewed as an indicator of tissue response in clinical applications since ancient times. The tissue temperature depends on various physical and physiological parameters like blood flow, metabolic heat generation, thermal conductivity of tissues, shape and size of organs etc. In this paper a finite element model has been proposed to study temperature distribution in skin and deep tissues of human limbs. The geometry of human limb is taken as elliptical tapered shape. It is assumed that outer surface of the limb is exposed to the environment. The appropriate boundary conditions have been framed based on physical conditions of the problem. The model has been developed for a three dimensional steady state case. Hexahedral circular sectoral elements are used to discretize the region. The results have been computed to obtain temperature profiles and study the relation of tissue temperature with the parameters like atmospheric temperature, rate of evaporation, thickness of tissues layers and shape of the limb. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Trace element air pollution monitoring studies in Slovenia using nuclear analytical techniques

    International Nuclear Information System (INIS)

    Smodis, S.B.; Jacimovic, R.; Jeran, Z.; Miklavcic, V.; Stegnar, P.; Stropnik, B.

    1994-01-01

    In the past, only a few investigations have been performed in Slovenia concerning trace elements, toxic elements, heavy metals and radionuclides in the atmosphere. During recent years, several projects were initiated, involving health-related studies connected to air pollution in highly exposed areas, mapping the status of air pollution in the whole country using biomonitors, as well as some specific research, i.e. involving studies of mercury speciation in the atmosphere around a mercury mine or concentration levels of radionuclides in biomonitors around a uranium mine. Since all these projects were or are of a preliminary nature, in this report, the emphasis is mainly on the methodology and analytical development (neutron activation analysis and X-ray spectrometry), and to a lesser extent on the results obtained up to now. Efforts are being put into co-ordination of all the presently running projects in order to complement the results and to make a unified database for their later evaluation and statistical interpretation. (author). 22 refs, 1 fig., 1 tab

  1. Physical--chemical studies of transuranium elements. Progress report, April 1, 1976--March 31, 1977

    International Nuclear Information System (INIS)

    Peterson, J.R.

    1977-01-01

    Major advances in our continuing program to determine, interpret, and correlate the basic chemical and physical properties of the transuranium elements are summarized for the period April 1, 1976, through March 31, 1977. Implementation of data reduction programs and acquisition of a CRT time-sharing graphics terminal/stand-alone computer have advanced significantly the handling capabilities of single-beam spectral data obtained by our microscope spectrophotometer. EsCl 3 , EsBr 3 , and EsI 3 have been well characterized spectroscopically, and limited X-ray diffraction data have been obtained from EsBr 3 and EsI 3 . The reduction of mixed Es-lanthanide trihalides has produced what might be Es(II). Dimorphism in BkCl 3 , CfCl 3 , and BkBr 3 has been studied spectrophotometrically and the results confirmed by X-ray analysis. Our solution microcalorimeter was improved by reducing the system-generated electrical noise and developing a novel sample container. The operating sensitivity was determined to be within the desired 0.1 percent precision requirement. The necessary hardware was obtained and software development was initiated for the capability to acquire, store, and analyze the heat of solution data automatically. A very sensitive apparatus (SQUID) for the determination of magnetic susceptibility has been constructed and is being evaluated. Our device should greatly facilitate the study of microgram-sized samples of transuranium elements and compounds

  2. Finite Element Study on Continuous Rotating versus Reciprocating Nickel-Titanium Instruments.

    Science.gov (United States)

    El-Anwar, Mohamed I; Yousief, Salah A; Kataia, Engy M; El-Wahab, Tarek M Abd

    2016-01-01

    In the present study, GTX and ProTaper as continuous rotating endodontic files were numerically compared with WaveOne reciprocating file using finite element analysis, aiming at having a low cost, accurate/trustworthy comparison as well as finding out the effect of instrument design and manufacturing material on its lifespan. Two 3D finite element models were especially prepared for this comparison. Commercial engineering CAD/CAM package was used to model full detailed flute geometries of the instruments. Multi-linear materials were defined in analysis by using real strain-stress data of NiTi and M-Wire. Non-linear static analysis was performed to simulate the instrument inside root canal at a 45° angle in the apical portion and subjected to 0.3 N.cm torsion. The three simulations in this study showed that M-Wire is slightly more resistant to failure than conventional NiTi. On the other hand, both materials are fairly similar in case of severe locking conditions. For the same instrument geometry, M-Wire instruments may have longer lifespan than the conventional NiTi ones. In case of severe locking conditions both materials will fail similarly. Larger cross sectional area (function of instrument taper) resisted better to failure than the smaller ones, while the cross sectional shape and its cutting angles could affect instrument cutting efficiency.

  3. Discrete element method study of fuel relocation and dispersal during loss-of-coolant accidents

    International Nuclear Information System (INIS)

    Govers, K.; Verwerft, M.

    2016-01-01

    The fuel fragmentation, relocation and dispersal (FFRD) during LOCA transients today retain the attention of the nuclear safety community. The fine fragmentation observed at high burnup may, indeed, affect the Emergency Core Cooling System performance: accumulation of fuel debris in the cladding ballooned zone leads to a redistribution of the temperature profile, while dispersal of debris might lead to coolant blockage or to debris circulation through the primary circuit. This work presents a contribution, by discrete element method, towards a mechanistic description of the various stages of FFRD. The fuel fragments are described as a set of interacting particles, behaving as a granular medium. The model shows qualitative and quantitative agreement with experimental observations, such as the packing efficiency in the balloon, which is shown to stabilize at about 55%. The model is then applied to study fuel dispersal, for which experimental parametric studies are both difficult and expensive. - Highlights: • We performed Discrete Element Methods simulation for fuel relocation and dispersal during LOCA transients. • The approach provides a mechanistic description of these phenomena. • The approach shows the ability of the technique to reproduce experimental observations. • The packing fraction in the balloon is shown to stabilize at 50–60%.

  4. Chemometric Study of Trace Elements in Hard Coals of the Upper Silesian Coal Basin, Poland

    Science.gov (United States)

    Rompalski, Przemysław; Cybulski, Krzysztof; Chećko, Jarosław

    2014-01-01

    The objective of the study was the analysis of trace elements contents in coals of the Upper Silesian Coal Basin (USCB), which may pose a potential threat to the environment when emitted from coal processing systems. Productive carbon overburden in central and southern zones of the USCB is composed mostly of insulating tertiary formations of a thickness from a few m to 1,100 m, and is represented by Miocene and Pliocene formations. In the data study the geological conditions of the coal seams of particular zones of the USCB were taken into account and the hierarchical clustering analysis was applied, which enabled the exploration of the dissimilarities between coal samples of various zones of the USCB in terms of basic physical and chemical parameters and trace elements contents. Coals of the northern and eastern zones of the USCB are characterized by high average Hg and low average Ba, Cr, and Ni contents, whereas coals of southern and western zones are unique due to high average concentrations of Ba, Co, Cu, Ni, and V. Coals of the central part of the USCB are characterized by the highest average concentration of Mn and the lowest average concentrations of As, Cd, Pb, V, and Zn. PMID:24967424

  5. Convenience of Statistical Approach in Studies of Architectural Ornament and Other Decorative Elements Specific Application

    Science.gov (United States)

    Priemetz, O.; Samoilov, K.; Mukasheva, M.

    2017-11-01

    An ornament is an actual phenomenon of the architecture modern theory, a common element in the practice of design and construction. It has been an important aspect of shaping for millennia. The description of the methods of its application occupies a large place in the studies on the theory and practice of architecture. However, the problem of the saturation of compositions with ornamentation, the specificity of its themes and forms have not been sufficiently studied yet. This aspect requires accumulation of additional knowledge. The application of quantitative methods for the plastic solutions types and a thematic diversity of facade compositions of buildings constructed in different periods creates another tool for an objective analysis of ornament development. It demonstrates the application of this approach for studying the features of the architectural development in Kazakhstan at the end of the XIX - XXI centuries.

  6. Immunohistochemical characterization of glandular elements in glandular cardiac myxoma: Study of six cases

    Directory of Open Access Journals (Sweden)

    Devajit Nath

    2017-01-01

    Full Text Available Back ground: Glandular cardiac myxoma has varying clinical presentation with uncertain histogenesis and debatable immunohistochemical profile. Glandular epithelial differentiations are rare phenomenon known to be present as an intrinsic component of the tumor. The origin of the glands has been attributed to epithelial differentiation of a totipotent cardiomyogenic precursor cells or the entrapped foregut rests in the tumor. Materials and Methods: Retrospective study includes six cases of glandular cardiac myxoma collected over a perior of 4 years. Sections were examined to define the histogenesis, histological and immunohistochemical profile of the glandular elements. Results: Incidence of glandular cardiac myxoma was 6.6% with a male to female ratio of 1:2.Mean age was 49.9 years. Left atrium was the commonest site. Five were sporadic and one was familial. Chest pain and dyspnea were the commonest clinical symptoms. Histologically all myxoma showed well formed glandular structures with typical myxomatous area. No atypia, mitosis or necrosis was identified in the glandular elements. Markers in six cases of glandular cardiac myxoma were immunopositive for CK7, CK 19, EMA, CEA, focally for E-cadherin while immunonegative for CK20, Chromogranin, Synaptophysin, calretenin, vimentin, B-catenin, TTF-1 and GCDFP-15 favoring enteric differentiation. Conclusion: Glandular cardiac myxoma is a rare entity which shows characteristics similar to those of classical cardiac myxoma with benign glandular elements showing enteric differentiation. Complete surgical excision is the treatment of choice with good prognosis. It is important to recognize this entity to avoid an erroneous diagnosis of metastatic adenocarcinoma.

  7. The study on the intake and distribution of elements for 'Reference Japanese'

    International Nuclear Information System (INIS)

    1978-01-01

    From the standpoint of radiological protection, the quantitative description of the physical characteristics and customs of man is the basis for calculating annual limit of intake, estimating dose equivalents and MIRD phantom for radioactive substances (ICRP 77). Committee 2 of ICRP has published compilation of data on the anatomical, chemical and physiological characteristics of man, as Standard Man and Reference Man. The models are, however, mostly based on the data published for Europeans and Americans. Reference Man, as characterized by the Task Group itself, is defined as a Caucasian and is a Western European or North American in habitat and custom. Reference Man, so far, is not directly applicable to other populations, for instance, the Japanese. Because it is known that differences exist between Asians, and Europeans and Americans with respect to race, customs and the pattern of food consumption. In view of this problem, it has become of necessity to seek standard or reference values for Japanese, i.e., mass and dimension of body and organs, and the daily intake, distribution, and metabolism of elements in Japanese, especially on the basis of more recently obtained data. Average mass of organs of the normal Japanese was studied and the results were presented for Reference Japanese Man. Development of chemical methods for determining stable elements in autopsy tissues was carried out to establish a highly reliable analytical system. Thyroidal uptake and biological half-life of ingested 131 I in relation to the dietal stable element intake was determined for two normal Japanese adult male subjects. (author)

  8. Integrated learning in practical machine element design course: a case study of V-pulley design

    Science.gov (United States)

    Tantrabandit, Manop

    2014-06-01

    To achieve an effective integrated learning in Machine Element Design course, it is of importance to bridge the basic knowledge and skills of element designs. The multiple core learning leads the pathway which consists of two main parts. The first part involves teaching documents of which the contents are number of V-groove formulae, standard of V-grooved pulleys, and parallel key dimension's formulae. The second part relates to the subjects that the students have studied prior to participating in this integrated learning course, namely Material Selection, Manufacturing Process, Applied Engineering Drawing, CAD (Computer Aided Design) animation software. Moreover, an intensive cooperation between a lecturer and students is another key factor to fulfill the success of integrated learning. Last but not least, the students need to share their knowledge within the group and among the other groups aiming to gain knowledge of and skills in 1) the application of CAD-software to build up manufacture part drawings, 2) assembly drawing, 3) simulation to verify the strength of loaded pulley by method of Finite Element Analysis (FEA), 4) the software to create animation of mounting and dismounting of a pulley to a shaft, and 5) an instruction manual. The end product of this integrated learning, as a result of the above 1 to 5 knowledge and skills obtained, the participating students can create an assembly derived from manufacture part drawings and a video presentation with bilingual (English-Thai) audio description of Vpulley with datum diameter of 250 mm, 4 grooves, and type of groove: SPA.

  9. Trace elements in nail polish as a source of contamination of nail clippings when used in epidemiological studies

    International Nuclear Information System (INIS)

    Favaro, P.C.; Bode, P.; De Nadai Fernandes, E.A.

    2005-01-01

    Trace elements were determined in 27 brands of nail polish using INAA so as to estimate the impact of nail polish remainders when using (finger, toe) nail clippings as a bioindicator for epidemiological studies. Fe was found to be present up to almost 1.7% in one brand. No unambiguous correlation between trace elements and color was established, though transparent polish has the lowest trace element concentrations. An estimate of the maximum effect (no removal of the paint) indicates that over-estimates of some trace element levels in nail with more than 200.000% may occur. If nail clippings will be used to study trace elements, very high demands have to be set to the efficiency and selectivity of the cleaning procedure. (author)

  10. Use of nuclear and nuclear-related analytical techniques in studies of trace and minor elements in air pollution

    International Nuclear Information System (INIS)

    Smodis, Borut; Stropnik, Boris

    1994-01-01

    Among nuclear and nuclear-related analytical techniques, neutron activation and X-ray fluorescence analysis are particularly useful for environmental studies owing to their non-destructive character and multi-element capability. In this work, procedures for k o -standardized instrumental neutron activation analysis (INAA) and energy-dispersive X-ray fluorescence (EDXRF) spectrometry for trace and minor elements in air pollution studies were investigated. The methods applied were validated by the analysis of suitable reference materials. Using INAA, 20 experimentally obtained elemental values out of 21 certified and all 29 experimentally obtained values compared with 'consensus' values (for the elements where no certified numbers are available) in two SRMs were statistically indistinguishable. Also, the contents of 28 elements in candidate NIST SRM 1573a Tomato Leaves are reported. The EDXRF results were statistically indistinguishable from certified values for eight out of nine elements in NIST SRM 3087. The detection limit for this method is around at 0.1 μg cm -2 per element, so in BCR CRM No. 128, which is intended for ambient air pollution data, only Fe and Zn out of 14 elements reported in the certificate were detected with acceptable precision (i.e., 10%) owing to the very low air particulate matter loading, lying in the region of only 250 μg cm -2 . (Author)

  11. Parametric study of unconstrained high-pressure torsion- Finite element analysis

    International Nuclear Information System (INIS)

    Halloumi, A; Busquet, M; Descartes, S

    2014-01-01

    The high-pressure torsion (HPT) experiments have been investigated numerically. An axisymmetric model with twist was developed with commercial finite element software (Abaqus) to study locally the specificity of the stress and strain history within the transformed layers produced during HPT processing. The material local behaviour law in the plastic domain was modelled. A parametric study highlights the role of the imposed parameters (friction coefficient at the interfaces anvil surfaces/sample, imposed pressure) on the stress/strain distribution in the sample bulk for two materials: ultra-high purity iron and steel grade R260. The present modelling provides a tool to investigate and to analyse the effect of pressure and friction on the local stress and strain history during the HPT process and to couple with experimental results

  12. Finite Element Analysis and Experimental Study on Elbow Vibration Transmission Characteristics

    Science.gov (United States)

    Qing-shan, Dai; Zhen-hai, Zhang; Shi-jian, Zhu

    2017-11-01

    Pipeline system vibration is one of the significant factors leading to the vibration and noise of vessel. Elbow is widely used in the pipeline system. However, the researches about vibration of elbow are little, and there is no systematic study. In this research, we firstly analysed the relationship between elbow vibration transmission characteristics and bending radius by ABAQUS finite element simulation. Then, we conducted the further vibration test to observe the vibration transmission characteristics of different elbows which have the same diameter and different bending radius under different flow velocity. The results of simulation calculation and experiment both showed that the vibration acceleration levels of the pipeline system decreased with the increase of bending radius of the elbow, which was beneficial to reduce the transmission of vibration in the pipeline system. The results could be used as reference for further studies and designs for the low noise installation of pipeline system.

  13. Elemental imbalance studies by INAA on extra neural tissues from amyotrophic lateral sclerosis patients

    International Nuclear Information System (INIS)

    Tandon, L.; Ehmann, W.D.

    1995-01-01

    Human kidney and liver tissues were studied for generalized elemental imbalances in amyotrophic lateral sclerosis (ALS) by instrumental neutron activation analysis (INAA). Iron was significantly increased (p<0.05) in ALS kidneys and Co and Fe (marginal, p<0.10) were increased in ALS liver compared with their respective controls. Mercury values were almost two-fold higher for ALS kidney and 17% higher for ALS liver as compared with their respective controls, However, the Hg data exhibited large variations and ALS-control differences were not significant. Data from the present study are discussed with reference to the role of metallothioneins (MT) in ALS, and a possible linkage between a free radical mediated mechanism and degeneration of cells in ALS is also explored. (author). 43 refs., 2 tabs

  14. Studying the effect of different elements in gastric emptying that produce normal variations in `healthy` individuals

    Energy Technology Data Exchange (ETDEWEB)

    Hauser, L. [Sydney University, Sydney, NSW (Australia)

    1999-06-01

    Maintaining the rate of emptying solids and liquids at normal levels, is an essential component for the correct functioning of the entire gastro-intestinal tract. There is no single-test available which provides a `baseline` for all gastric emptying studies. This problem arises due to many elements which normally effect the rate of gastric emptying, such as those dealing with patient factors, the composition of the liquid/solid meal used and also which radiopharmaceutical is chosen. It is therefore recommended that each Nuclear Medicine practice needs to set-up guidelines which are able to be consistently reproduced. One such guideline may be in the form of a `liquid glucose meal` which provides consistent and accurate results for gastric emptying studies 18 refs., 2 figs.

  15. Use of X-ray fluorescence analysis in studying vertical element migration in weathering zone

    International Nuclear Information System (INIS)

    Houdkova, Z.; Hally, J.

    1980-01-01

    The vertical migration of elements was studied in a model area of the Zelivka river basin. The VRS 2 Zeiss GDR analyzer, connected to automatic processor KSR 4 100, were used for the study of concentration variations. Soil samples were taken from bore holes drilled to a depth of the solid bedrock (0 to 6 m). The contents of SiO 2 , Al 2 O 3 , Fe 2 O 3 , K 2 O, CaO, TiO 2 , P 2 O 5 and MnO were determined in concentration ranges from 10 -2 to 10 1 %. The method was tested in comparative measurements against conventional methods of chemical analysis. (author)

  16. Transient behaviour study program of research reactors fuel elements at the Hydra Pulse Reactor

    International Nuclear Information System (INIS)

    Khvostionov, V.E.; Egorenkov, P.M.; Malankin, P.V.

    2004-01-01

    Program on behavior study of research reactor Fuel Elements (FE) under transient regimes initiated by excessive reactivity insertion is being presented. Program would be realized at HYDRA pulse reactor at Russian Research Center 'Kurchatov Institute' (RRC 'K1'). HYDRA uses aqueous solution of uranyl sulfate (UO 2 SO 4 ) as a fuel. Up to 30 MJ of energy can be released inside the core during the single pulse, effective power pulse width varying from 2 to 10 ms. Reactor facility allows to investigate behaviour of FE consisting of different types of fuel composition, being developed according to Russian RERTR. First part of program is aimed at transient behaviour studying of FE MR, IRT-3M, WWR-M5 types containing meats based on dioxide uranium in aluminum matrix. Mentioned FEs use 90% and 36% enriched uranium. (author)

  17. Discrete element method study of fuel relocation and dispersal during loss-of-coolant accidents

    Science.gov (United States)

    Govers, K.; Verwerft, M.

    2016-09-01

    The fuel fragmentation, relocation and dispersal (FFRD) during LOCA transients today retain the attention of the nuclear safety community. The fine fragmentation observed at high burnup may, indeed, affect the Emergency Core Cooling System performance: accumulation of fuel debris in the cladding ballooned zone leads to a redistribution of the temperature profile, while dispersal of debris might lead to coolant blockage or to debris circulation through the primary circuit. This work presents a contribution, by discrete element method, towards a mechanistic description of the various stages of FFRD. The fuel fragments are described as a set of interacting particles, behaving as a granular medium. The model shows qualitative and quantitative agreement with experimental observations, such as the packing efficiency in the balloon, which is shown to stabilize at about 55%. The model is then applied to study fuel dispersal, for which experimental parametric studies are both difficult and expensive.

  18. Experimental Study of Fuel Element Motion in HTR-PM Conveying Pipelines

    International Nuclear Information System (INIS)

    Wang Xin; Zhang Haiquan; Nie Junfeng; Li Hongke; Liu Jiguo; He Ayada

    2014-01-01

    The motion action of sphere fuel element (FE) inside fuel pipelines in HTR-PM is indeterminate. Fuel motion is closely connected with the interaction of FE and inner surface of fuel conveying pipe. In this paper, motion method of fuel elements in its conveying pipe is Experimental studied. Combined with the measurement of the fuel passing speed in stainless steel pipe and the track left by sphere ball for experiment, interaction modes of fuel and inner-surface of pipe, which is sliding friction, rolling friction and Collision, has been found. The modes of interaction can affect the speed of fuel conveying, amount of sphere waste and operation stability of fuel handling of high temperature reactor-pebble bed modules (HTR-PM). Furthermore, the motion process of fuel passing a big-elbow which is lying on the top of fuel pneumatic hoisting pipe were experimented. The result shows that the speed before and the speed after the elbow is positive correlation. But with the increase of speed before the elbow, the speed after the elbow increase less. Meanwhile the fuel conveying mode changes from friction to collision. And the conveying process is still steady. The effect can be used to controlling the speed of fuel conveying in fuel handling process of HTR-PM. (author)

  19. Blocking Mechanism Study of Self-Compacting Concrete Based on Discrete Element Method

    Science.gov (United States)

    Zhang, Xuan; Li, Zhida; Zhang, Zhihua

    2017-11-01

    In order to study the influence factors of blocking mechanism of Self-Compaction Concrete (SCC), Roussel’s granular blocking model was verified and extended by establishing the discrete element model of SCC. The influence of different parameters on the filling capacity and blocking mechanism of SCC were also investigated. The results showed that: it was feasible to simulate the blocking mechanism of SCC by using Discrete Element Method (DEM). The passing ability of pebble aggregate was superior to the gravel aggregate and the passing ability of hexahedron particles was bigger than tetrahedron particles, while the tetrahedron particle simulation results were closer to the actual situation. The flow of SCC as another significant factor affected the passing ability that with the flow increased, the passing ability increased. The correction coefficient λ of the steel arrangement (channel section shape) and flow rate γ in the block model were introduced that the value of λ was 0.90-0.95 and the maximum casting rate was 7.8 L/min.

  20. Mechanical characterization of atherosclerotic arteries using finite-element modeling: feasibility study on mock arteries.

    Science.gov (United States)

    Pazos, Valérie; Mongrain, Rosaire; Tardif, Jean-Claude

    2010-06-01

    Clinical studies on lipid-lowering therapy have shown that changing the composition of lipid pools reduced significantly the risk of cardiac events associated with plaque rupture. It has been shown also that changing the composition of the lipid pool affects its mechanical properties. However, knowledge about the mechanical properties of human atherosclerotic lesions remains limited due to the difficulty of the experiments. This paper aims to assess the feasibility of characterizing a lipid pool embedded in the wall of a pressurized vessel using finite-element simulations and an optimization algorithm. Finite-element simulations of inflation experiments were used together with nonlinear least squares algorithm to estimate the material model parameters of the wall and of the inclusion. An optimal fit of the simulated experiment and the real experiment was sought with the parameter estimation algorithm. The method was first tested on a single-layer polyvinyl alcohol (PVA) cryogel stenotic vessel, and then, applied on a double-layered PVA cryogel stenotic vessel with a lipid inclusion.

  1. Comparative study for essential elements determination in milk products samples by INAA and ICP-AES

    International Nuclear Information System (INIS)

    Kira, Carmen S.; Maihara, Vera A.

    2002-01-01

    The mineral elements Ca, Fe, K, Mg, Na and Zn were analyzed in milk products by using instrumental neutron activation analysis (INAA) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The study included four types of cheese (mozzarella, minas, prato, parmesan), chocolate milk and yogurt. The samples were purchased from the local markets. Average concentrations ranged from 3668 (chocolate milk) to 16558 (parmesan cheese) mg/kg for Ca; from 2.61 (parmesan cheese) to 28.9 (chocolate milk) mg/kg for Fe; from 673 (mozzarella cheese) to 10492 (chocolate milk) mg/kg for K; from 398 (yogurt) to 2280 (minas cheese) mg/kg for Mg; from 1681 (yogurt) to 15248 (parmesan cheese) mg/kg for Na; from 12.1 (chocolate milk) to 71.8 (parmesan cheese) mg/kg for Zn. Two National Institute of Standards and Technology (NIST) standard reference materials (SRM 8435 Whole Milk Powder and SRM 1549 Non Fat Milk Powder) were analyzed to verify method accuracy. The statistic test used to determine the significance of the difference between the techniques was based on Unpaired t-Student test. Statistical test revealed no significance differences (P< 0,05) between the average values provided by the two methods for the most of determined elements. (author)

  2. Study on the extraction of rare earth elements in liquid bismuth

    International Nuclear Information System (INIS)

    Harada, M.; Adachi, M.; Kai, Y.; Koike, K.

    1987-01-01

    Three factors, which are important for the extraction of rare earth elements in liquid bismuth - molten salt system, were studied, i. e., the equilibrium distribution of neodymium, samarium and bismuth between molten LiCl - liquid Bi-Li alloys, the extraction rate of rare earths, and the characteristics of the extractor with drop dispersion. The rare earth elements were extracted through redox reactions. In high range of Li-mole fraction in the alloy phase, X Li , the distribution of neodymium and bismuth in the salt phase markedly increased as X Li increased. The anomalous increase is attributed to the formation of the compound comprised of Nd, Li, Bi and oxygen in the salt phase. The redox reaction processes were very fast and the extraction rates for rare earths are controlled by the diffusion processes of the solute and the metallic lithium. The process for the formation of liquid metal drops in the continuous phase is predictable from semiempirical correlations reported for aqueous solution - organic solvent systems. The height of droplet bed being accumulated on drop settling portion is predictable from the coalescence time of single drop to a flat metal interface. The coalescence of metal drop to clean interface was very fast. The extractor type of liquid metal dispersion in molten salt is suitable for the extraction process in the fuel reprocessing of MSR or MSBR. (author)

  3. Thermal decomposition of hydrotalcite-like compounds studied by a novel tapered element oscillating microbalance (TEOM)

    International Nuclear Information System (INIS)

    Perez-Ramirez, Javier; Abello, Sonia

    2006-01-01

    For the first time, we report on the application of a tapered element oscillating microbalance (TEOM) as a novel technique to investigate the thermal decomposition of hydrotalcite-like compounds (HTlcs) in air. Experiments were performed in the temperature range of 323-973 K with Mg-Al, Ni-Al, and Co-Al-HTlcs. The TEOM technique measures mass changes based on inertial forces, presenting important advantages over conventional thermogravimetric analyzers, such as the very rapid time response and the well-defined flow pattern. In general terms, excellent agreement between TEOM, TGA, and DTA techniques during HTlc decomposition was obtained. Interestingly, transition temperatures in the TEOM were lower than in TGA and DTA, particularly for removal of interlayer water but also for dehydroxylation of the brucite-like layers and decarbonation. This was attributed to the flow-through operation in the tapered element of the TEOM as compared to the recognized gas stagnancy and bypass in sample crucibles of conventional thermogravimetric analyzers. Our results conclude that the TEOM technique is suitable for temperature-programmed studies. However, due to its operation principle, blank runs are required in contrast to the more automatic operation in commercial thermogravimetric units. Besides, a careful sample loading and packing in the micro-reactor is essential for reproducible results

  4. Comparative study of the nutritional composition and toxic elements of farmed and wild Chanodichthys mongolicus

    Science.gov (United States)

    Jiang, Haifeng; Cheng, Xiaofei; Geng, Longwu; Tang, Shizhan; Tong, Guangxiang; Xu, Wei

    2017-07-01

    Information of the difference in quality between farmed and wild fish is central to better ensuring fish products produced in aquaculture meet regulatory and consumer requirements. Proximate composition, amino acid and fatty acid profiles, and toxic elements contents of farmed and wild Chanodichthys mongolicus were established and compared. Significantly higher crude protein content while lower moisture content in farmed fish compared to wild fish were observed ( Pacids (TAA), total essential amino acids (TEAA), total non-essential amino acids (TNEAA) and total delicious amino acids (TDAA) in farmed fish were all significantly higher than those in the wild equivalent ( Pacid profiles in both farmed and wild C. mongolicus were dominated by monounsaturated fatty acid (MUFA), with farmed fish contained much more MUFA content compared to wild counterpart ( Pacid (PUFA) including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) than farmed fish ( Pacid (C18:2n6) were the predominant PUFA in wild and farmed C. mongolicus, respectively. Moreover, farmed fish displayed an overall lower toxic element levels (As, Cd, Pb and Hg) in comparison with wild fish, and both were far lower than the established limit standard. In conclusion, our results suggest that the nutritional quality of farmed C. mongolicus was inferior to their wild counterpart with respect to fatty acids nutrition, and therefore further studies should focus on the improving C. mongolicus diet in order to enhance the overall nutritional composition.

  5. Studies of trace element determinations in nails by neutron activation analysis method

    International Nuclear Information System (INIS)

    Aguiar, Amilton Reinaldo; Saiki, Mitiko

    1996-01-01

    The purpose of this work was to develop the neutron activation analysis for trace element determinations in nails in order to apply this method to the study of the cystic fibrosis disease. It was verified that the elements Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Se and Zn can be determined by using short and long irradiations with thermal neutron flux from 10 11 to 10 13 n.cm -2 . -1 at the IEA-R1 nuclear research reactor. The washing solutions of triton-X100, NH 4 OH and acetone were tested in order to eliminate external contaminants from the nail samples. The nail analyses of the individual fingers from both of hands showed that the samples must be collected from all the fingers from both of hands to have a representative sample. The precision and the accuracy of the results were also examined by analyzing NIES 10C Rice Flour, IUPAC Bowen's Kale and NIST 1572 Citrus Leaves reference materials. (author)

  6. Finite Element Study of Three Different Treatment Designs of a Mandibular Three Implant-Retained Overdenture

    Directory of Open Access Journals (Sweden)

    M. Shishesaz

    Full Text Available Abstract This study compares ball, bar-clip and bar-ball attachment systems for implant-retained mandibular overdentures with three implants. The first implant is placed in the middle of the mandible and the other two are imbedded in the first premolar regions. Linear elastic finite element analysis is used for design analysis. Three dimensional geometry of the mandible is generated from computed tomography. Other parts are modeled using SolidWorks software. The foodstuff is positioned at the right first molar, representing the most frequent masticating situation. To obtain accurate mesh-independent results, finite element models are solved using several mesh grids. They are then validated by means of a detailed convergence analysis. The results demonstrate that the highest von-Mises stress in the bone is always located around the neck of the implant, at its upper threads. Ball and bar-ball attachments transfer the highest and lowest stresses to the bone surrounding the implants, respectively. The lowest stresses in the cortical and cancellous bones are due to bar-ball attachment. Yet, the overdenture gets its maximum movement for this arrangement. Consequently, the use of bar-ball attachment is only recommended for the cases in which stress transferred to peri-implant bone is more important than overdenture stability. Among the three treatment designs, ball attachment seems to exhibit the lowest lateral and overall displacements and hence, better overdenture stability.

  7. A comparison study on the performance of lower order solid finite element for elastic analysis of plate and shell structures

    International Nuclear Information System (INIS)

    Lee, Young Jung; Lee, Sang Jin; Choun, Young Sun; Seo, Jeong Moon

    2003-05-01

    The objective of this research is to assess the performance of lower order solid finite elements which will be ultimately applied into the safety analysis of nuclear containment building. For the safety analysis of large structures such as nuclear containment building, efficient lower order finite element is necessarily required to calculate the structural response of containment building with low computational cost. In this study, the state of the art formulations of lower order solid finite element are throughly reviewed and the best possible solid finite element is adopted into the development of nuclear containment analysis system. Three 8-node solid finite elements based on standard strain-displacement relationship, B-bar method and EAS method are implemented as computer modules and completely tested with various plate and shell structures. The present results can be directly applied into the analysis code development for general reinforced concrete structures

  8. Study of the Reactive-element Effect in Oxidation of Fe-cr Alloys Using Transverse Section Analytical Electron Microscopy

    Science.gov (United States)

    King, W. E.; Ethridge, E. C.

    1985-01-01

    The role of trace additions of reactive elements like Y, Ce, Th, or Hf to Cr bearing alloys was studied by applying a new developed technique of transverse section analytical electron microscopy. This reactive-element effect improves the high temperature oxidation resistance of alloys by strongly reducing the high temperature oxidation rate and enhancing the adhesion of the oxide scale, however, the mechanisms for this important effect remain largely unknown. It is indicated that the presence of yttrium affects the oxidation of Fe-Cr-Y alloys in at least two ways. The reactive element alters the growth mechanism of the oxide scale as evidenced by the marked influence of the reactive element on the oxide scale microstructure. The present results also suggest that reactive-element intermetallic compounds, which internally oxidize in the metal during oxidation, act as sinks for excess vacancies thus inhibiting vacancy condensation at the scale-metal interface and possibly enhancing scale adhesion.

  9. Numerical study of viscoelastic polymer flow in simplified pore structures using stabilised finite element model

    Energy Technology Data Exchange (ETDEWEB)

    Qi, M.; Wegner, J.; Ganzer, L. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). ITE

    2013-08-01

    Polymer flooding, as an EOR method, has become one of the most important driving forces after water flooding. The conventional believe is that polymer flooding can only improve sweep efficiency, but it has no contribution to residual oil saturation reduction. However, experimental studies indicated that polymer solution can also improve displacement efficiency and decrease residual oil saturation. To get a better understanding of the mechanism to increase the microscopic sweep efficiency and the displacement efficiency, theoretical studies are required. In this paper, we studied the viscoelasticity effect of polymer by using a numerical simulator, which is based on Finite Element Analysis. Since it is showed experimentally that the first normal stress difference of viscoelastic polymer solution is higher than the second stress difference, the Oldroyd-B model was selected as the constitutive equation in the simulation. Numerical modelling of Oldroyd-B viscoelastic fluids is notoriously difficult. Standard Galerkin finite element methods are prone to numerical oscillations, and there is no convergence as the elasticity of fluid increases. Therefore, we use a stabilised finite element model. In order to verify our model, we first built up a model with the same geometry and fluid properties as presented in literature and compared the results. Then, with the tested model we simulated the effect of viscoelastic polymer fluid on dead pores in three simplified pore structures, which are contraction structure, expansion structure and expansion-contraction structure. Correspondingly, the streamlines and velocity contours of polymer solution, with different Reynolds numbers (Re) and Weissenberg numbers (We), flowing in these three structures are showed. The simulation results indicate that the viscoelasticity of polymer solution is the main contribution to increase the micro-scale sweep efficiency. With higher elasticity, the velocity of polymer solution is getting bigger at

  10. The Influence of Artificial Cervical Disc Prosthesis Height on the Cervical Biomechanics: A Finite Element Study.

    Science.gov (United States)

    Yuan, Wei; Zhang, Haiping; Zhou, Xiaoshu; Wu, Weidong; Zhu, Yue

    2018-05-01

    Artificial cervical disc replacement is expected to maintain normal cervical biomechanics. At present, the effect of the Prestige LP prosthesis height on cervical biomechanics has not been thoroughly studied. This finite element study of the cervical biomechanics aims to predict how the parameters, like range of motion (ROM), adjacent intradiscal pressure, facet joint force, and bone-implant interface stress, are affected by different heights of Prestige LP prostheses. The finite element model of intact cervical spine (C3-C7) was obtained from our previous study, and the model was altered to implant Prestige LP prostheses at the C5-C6 level. The effects of the height of 5, 6, and 7 mm prosthesis replacement on ROM, adjacent intradiscal pressure, facet joint force, as well as the distribution of bone-implant interface stress were examined. ROM, adjacent intradiscal pressure, and facet joint force increased with the prosthesis height, whereas ROM and facet joint force decreased at C5-C6. The maximal stress on the inferior surface of the prostheses was greater than that on the superior surface, and the stresses increased with the prosthesis height. The biomechanical changes were slightly affected by the height of 5 and 6 mm prostheses, but were strongly affected by the 7-mm prosthesis. An appropriate height of the Prestige LP prosthesis can preserve normal ROM, adjacent intradiscal pressure, and facet joint force. Prostheses with a height of ≥2 mm than normal can lead to marked changes in the cervical biomechanics and bone-implant interface stress. Copyright © 2018 Elsevier Inc. All rights reserved.

  11. Development of a SISAK extraction system for chemical studies of element 108, hassium

    Energy Technology Data Exchange (ETDEWEB)

    Samadani, F.; Alstad, J.; Bjoernstad, T.; Stavsetra, L.; Omtvedt, J.P. [Oslo Univ. (Germany). Dept. of Chemistry

    2010-07-01

    A liquid-liquid extraction system suitable for studies of chemical properties of Hs (element 108), in the form of HsO{sub 4}, was developed using {gamma}-emitting isotopes of its homologue Os. The system is targeted for the fast on-line extraction system SISAK, which operates in a continuous manner and is suitable for liquid-phase studies of transactinide elements. The distribution of OsO{sub 4} between various dilute NaOH solutions and toluene was studied. Both batch and SISAK on-line experiments were performed to develop an appropriate system. From analysis of the extraction curves equilibrium constants for the formation of the presumed complexes, Na[OsO{sub 4}(OH)] and Na{sub 2}[OsO{sub 4}(OH){sub 2}], were obtained: K{sub 1} = (1 {+-} 0.5) x 10{sup 4} and K{sub 2} = 12 {+-} 8, respectively. The SISAK system includes a liquid-scintillation detection system for {alpha} measurements. Due to quenching effects it is not possible to perform direct measurement of the aqueous phase {alpha}'s. Therefore, a two-stage extraction method that provides an indirect measurement of the activity in the aqueous phase was developed as part of the proposed system for Hs: Acidification of the raffinate from the first stage result in recovery of OsO{sub 4}, which is highly extractable into toluene. The yield of extraction in the second step, from 0.01 M NaOH solution after acidification with H{sub 2}SO{sub 4} solution, was (90 {+-} 3)%. (orig.)

  12. Development of a SISAK extraction system for chemical studies of element 108, hassium

    International Nuclear Information System (INIS)

    Samadani, F.; Alstad, J.; Bjoernstad, T.; Stavsetra, L.; Omtvedt, J.P.

    2010-01-01

    A liquid-liquid extraction system suitable for studies of chemical properties of Hs (element 108), in the form of HsO 4 , was developed using γ-emitting isotopes of its homologue Os. The system is targeted for the fast on-line extraction system SISAK, which operates in a continuous manner and is suitable for liquid-phase studies of transactinide elements. The distribution of OsO 4 between various dilute NaOH solutions and toluene was studied. Both batch and SISAK on-line experiments were performed to develop an appropriate system. From analysis of the extraction curves equilibrium constants for the formation of the presumed complexes, Na[OsO 4 (OH)] and Na 2 [OsO 4 (OH) 2 ], were obtained: K 1 = (1 ± 0.5) x 10 4 and K 2 = 12 ± 8, respectively. The SISAK system includes a liquid-scintillation detection system for α measurements. Due to quenching effects it is not possible to perform direct measurement of the aqueous phase α's. Therefore, a two-stage extraction method that provides an indirect measurement of the activity in the aqueous phase was developed as part of the proposed system for Hs: Acidification of the raffinate from the first stage result in recovery of OsO 4 , which is highly extractable into toluene. The yield of extraction in the second step, from 0.01 M NaOH solution after acidification with H 2 SO 4 solution, was (90 ± 3)%. (orig.)

  13. Integrative study of the behavior of transuranic elements in the marine environment. Progress report, June 1, 1981-May 31, 1982

    International Nuclear Information System (INIS)

    Choppin, G.R.; Morse, J.W.

    1981-12-01

    The laboratory at Florida State University is conducting fundamental research under marine conditions of the speciation of actinide elements in sea water. At the Texas A and M University, the adsorption of actinides from such solutions upon various components of sediments is being studied. This approach should yield radiochemical data directly applicable to the understanding of the distribution and speciation of transuranic elements in the marine environment. A limited number of common sediment components are being studied to determine which factors determine the partitioning of transuranic elements among these components. The individual components then will be combined in synthetic sediments of increasing complexity and the distributions studied between these sediments and solutions. Hopefully, this will lead to studies agreeing with model predictions for the adsorption of transuranic elements in marine sediments

  14. State of art in experimental studies and theory of superheavy elements

    International Nuclear Information System (INIS)

    Zvara, I.

    2002-01-01

    Recent years have seen remarkable progress in synthesizing new, superheavy' elements (SHE). Researchers at Dubna reached the slopes of the expected 'island of stability' (around Z = 114 and N = 184) in a 'sea' of nuclides with very short partial half-lives against spontaneous fission and/or alpha decay. In long bombardments (weeks to months) of isotopes of U, Pu and Cm by very intense (3x10 12 s -1 ) beams of 48 Ca projectiles, they have discovered mostly alpha active isotopes of previously unknown elements 116 and 114, as well as of element 112, all with unusually long half-lives - up to minutes. Only physical methods have been used for isolation and identification of the produced new nuclei. These findings give an impetus to chemical studies. Feasibility of experiments critically depends on half-lives and production cross section. Lifetimes of the order of a second or more are necessary for some gas phase chemistry studies, but at least some 10 seconds for solution chemistry. The production rates of observable atoms might be higher in chemical studies, because chemists can make use of thicker targets, and achieve higher (chemical) yield and detection efficiency than in physical experiments. Work on chemical identification of the 3-min 283 112 is in progress at Dubna and planned in other laboratories. Being a homologue of Hg, element 112 must be even more volatile metal. Thanks to this, hopefully, its single atoms, will be easily separated from interfering activities simultaneously produced in the bombardment. Quantum (theoretical) chemistry studies aim at solving the problem of 'relativistic effects' in chemical properties of SHE; such effects increase with higher Z's. As the available calculational resources fast and steadily grow (unlike the beam time available at accelerators) one can hope that quantum chemists will once be able to advise the experimenters which kind of studies to do to obtain most important and interesting results. This is not yet possible

  15. Study of rare earth elements, uranium and thorium migration in rocks from Espinharas uranium deposit, Paraiba - Brazil

    International Nuclear Information System (INIS)

    Conceicao, Cirilo C.S.

    2009-01-01

    The determination of rare earth elements as natural analogue in patterns geologic has grown as a tool for predicting the long-term safety of nuclear disposal in geological formation. Migration of natural radionuclides is one of the most serious problems in the waste deposit from nuclear fuel cycle. Rare earth elements show the same kinetic behavior in rocks as natural radionuclides. This similar property of the analogues allows perform studies and models on the subject of radionuclides migration. The aim of this study was to determine the distribution of rare earth elements in rocks located at Espinharas - Paraiba - Brazil, uranium deposit. In this work are presented the results from the study above the distribution of rare earth elements in function of the degree of mineralized rocks, composition and the conditions of radioactive equilibrium of the uranium and thorium in some fractures on the rocks from radioactive occurrence of Espinharas-Brazil. The results show that there is a correlation of heavy rare earth elements, uranium and Thorium concentrations to oxidation factor of the rocks. However this correlation was not observed for light rare earth elements. It means that heavy rare earth elements follow the natural radionuclides in oxidation process of rocks. The samples were analyzed by ICP-MS, alpha and gamma spectrometry, X-ray diffraction and fluorimetry. (author)

  16. Study of characterization of trace elements in marine shells of Sambaqui: correlation between recent and old shells

    International Nuclear Information System (INIS)

    Gomez, Mauro Roger Batista Pousada; Rocha, Flavio Roberto; Silva, Paulo Sergio Cardoso da

    2013-01-01

    Calcium carbonate of recent and ancient C. rhizophorae oyster shells was analyzed for the determination of trace elements by instrumental neutron activation analysis. The ancient shells belong to a Sambaqui located in Cananeia region, South of Sao Paulo state and the recent ones are from an oyster production farm in the same region Studies related to the element concentrations in molluscs shell has been done as a tentative of establishing the element concentrations with palio-environmental factor. In this study it was aimed to verify differences in the elemental constitution of recent and ancient oyster shells that present potential for being used as indicator of marine changes. Results indicated that the elements Br, Ce, La, Na, Sm and An are higher in recent shells and the elements Cr, Fe Sc and Th are higher in ancient shells. Statistical analyses performed indicated that the enrichment of the light rare earth elements related to Ca are possibly good candidates for these palio-environmental studies. (author)

  17. Study on essential and toxic elements intake from drinking of Chinese tea

    International Nuclear Information System (INIS)

    Hai-Qing Zhang; Bang-Fa Ni; Wei-Zhi Tian; Gui-Ying Zhang; Dong-Hui Huang; Cun-Xiong Liu; Cai-Jin Xiao; Hong-Chao Sun; Chang-Jun Zhao

    2011-01-01

    Twenty different brands of Chinese tea were analyzed for multiple trace elements, including some essential and toxic elements, by neutron activation analysis (NAA). A comparison among tea brands from China, India, US and other countries was made for the ranges and averages of concentrations for Na, K, Mn, Cu, and Br. It has been observed that the trace element contents in tea leaves are largely dependent upon the soil and the environment where the tea grows. Chinese tea is rich in Mn and Cu comparing with those of other counties surveyed, but is indigent in Na. The transference ratio for each element determined (i.e., the fraction of an element in tea leave transferred into solution when tea is leached by percolation) is also reported. Adult daily intakes of some essential and toxic elements from tea drinking were also estimated. (author)

  18. Study The Effect Extension Of Fuel Element Life Time In The Core Small Power Reactor

    International Nuclear Information System (INIS)

    Dewita, E.; Rusli, A.; Tuka, V.

    1998-01-01

    Mini power reactor is a low power nuclear reactor which mostly are designed especially to supply energy demand in the remote areas, such as for electricity generation, industries, desalination and district heating.The goal of the operation cycle extension to 3 - 5 years is to maximize the use of the fuel in order to achieve much cheaper energy generated. From the stand point of fuel element, in order to maximize the fuel life time there is a need to see all possible effects of extended life time to the fuel behavior in the core. This study has been carried out in order to obtain the understanding on all influencing factors to the fuel element behaviors at extended operation cycle whose results are expected to be useful as the input to fuel design and fabrication. The study has show that the material selection for fuel and cladding materials are the essential factor in maximizing the fuel life time. Development of cladding and fuel materials has been done, and shown that the new zirconium alloy, zircaloy, having composition of Zr-1,0 Sn-0,27 Fe-0,16 Cr-0,1 Nb-0,01 Ni has higher corrosion resistance and mechanical characteristics better than that of the standard zircaloy-4. Adding the Nb content (0,005-0,2 wt %), decreasing the Sn content until 0,5 wt %, and decreasing the ratio of Fe/Cr from 0,6 to 0,5 can increase resistance to corrosion, while decreasing the ratio of Fe and Cr from 0,3 to 0,7 wt % can increase the mechanical characteristics. To enhance the resistance to nodular corrosion in the BWR system, adding the Nb-Mo, Nb-W and Nb-V at low Sn zircaloy-2 can be done. In improving the fuel element it has been shown that adding niobium (Nb 2 O 5 -0,3 wt %) can enlarge the particle size of fuel hence improving the fuel performance

  19. Study of the behaviour of some heavy elements in solvents containing hydrogen fluoride

    International Nuclear Information System (INIS)

    Tarnero, M.

    1967-01-01

    The anhydrous liquid mixtures: dinitrogen tetroxide-hydrogen fluoride and antimony pentafluoride-hydrogen fluoride were studied as solvents for heavy elements interesting nuclear energy: uranium, thorium, zirconium and for some of their compounds. For N 2 O 4 -HF mixtures, electric conductivity measurements and liquid phase infrared spectra were also obtained. Uranium and zirconium tetrafluoride are much more soluble in N 2 O 4 -HF mixtures than in pure hydrogen fluoride. Uranium dissolved in these mixtures is pentavalent. In SbF 5 -HF mixtures, uranium dissolves with hydrogen evolution and becomes trivalent. The solid compound resulting from the dissolution is a fluoro-antimonate: U(SbF 6 ) 3 . (author) [fr

  20. Ultrasonic wave propagation in viscoelastic cortical bone plate coupled with fluids: a spectral finite element study.

    Science.gov (United States)

    Nguyen, Vu-Hieu; Naili, Salah

    2013-01-01

    This work deals with the ultrasonic wave propagation in the cortical layer of long bones which is known as being a functionally graded anisotropic material coupled with fluids. The viscous effects are taken into account. The geometrical configuration mimics the one of axial transmission technique used for evaluating the bone quality. We present a numerical procedure adapted for this purpose which is based on the spectral finite element method (FEM). By using a combined Laplace-Fourier transform, the vibroacoustic problem may be transformed into the frequency-wavenumber domain in which, as radiation conditions may be exactly introduced in the infinite fluid halfspaces, only the heterogeneous solid layer needs to be analysed using FEM. Several numerical tests are presented showing very good performance of the proposed approach. We present some results to study the influence of the frequency on the first arriving signal velocity in (visco)elastic bone plate.

  1. The study of carrying capacity of timber slabs with use the finite elements method

    Directory of Open Access Journals (Sweden)

    Demeshok Vitalii

    2017-01-01

    Full Text Available In the article, the results of the study of behavior of timber slab under influence of fire with the standard “time-temperature” curve are presented. The finite element method was used for it. For the calculation we constructed a grid models of timber slabs. As a result of solution of the thermal problem was obtained temperature distribution and the graphs of maximum deflection of timber slabs and its slew rate depending on the time of the test. The obtained graphs allow to obtain data on the occurrence of the limit state of loss of bearing capacity by comparing current values of displacements and velocities with the maximum allowable. Analysis of the graphs shows that the criteria limit state of loss of bearing capacity does not occur. Calculation method of evaluating the fire resistance of timber slabs was developed. For it use database about strain-stress state of this slabs in conditions of influence of the fire.

  2. Study of particulates and heavy elements in air of some Syrian cities

    International Nuclear Information System (INIS)

    Othman, I.; Al-Oudat, M.; Al-Rayes, A. H.; Al- Kharfan, K.

    1999-11-01

    A study of air pollution in different sites of five Syrian cities (Damascus, Aleppo, Tartous, Homs, and Sweda) was carried out. The concentration of total suspended particulate (TSP), particulate less than 10 microns (PM 10) and less than 3 microns (PM 3) were measured using high volume air sampler (HVAS). Heavy element concentration, Pb, Cd, Zn, and Cu were also determined using anodic stripping voltametry. The result showed that TSP, PM 10 and PM 3 were higher than WHO standards in several times. Mean lead concentrations ranged between 0.58 and 2.96 μg/m 3 and 0.56 and 1.53 μg/m 3 in Damascus and Aleppo respectively, while in the other cities these concentrations were less than WHO standards (0.5 - 1 μg/m 3 ). (author)

  3. Application of discrete element method to study mechanical behaviors of ceramic breeder pebble beds

    International Nuclear Information System (INIS)

    An Zhiyong; Ying, Alice; Abdou, Mohamed

    2007-01-01

    In this paper, the discrete element method (DEM) approach has been applied to study mechanical behaviors of ceramic breeder pebble beds. Directly simulating the contact state of each individual particle by the physically based interaction laws, the DEM numerical program is capable of predicting the mechanical behaviors of non-standard packing structures. The program can also provide the data to trace the evolution of contact characteristics and forces as deformation proceeds, as well as the particle movement when the pebble bed is subjected to external loadings. Our numerical simulations focus on predicting the mechanical behaviors of ceramic breeder pebble beds, which include typical fusion breeder materials in solid breeder blankets. Current numerical results clearly show that the packing density and the bed geometry can have an impact on the mechanical stiffness of the pebble beds. Statistical data show that the contact forces are highly related to the contact status of the pebbles

  4. Trace element studies in urolithiasis; preliminary investigation on mixed calcium oxalate-struvite urinary calculi

    International Nuclear Information System (INIS)

    Syed, A.M.; Qadiruddin, M.; Shirin, K.; Manser, W.W.T.

    1999-01-01

    In this study the levels of the trace elements copper , zinc, lead, iron, aluminum, nickel, chromium along with magnesium, sodium and potassium were estimated in fifteen mixed calcium oxalate-struvite (CaOx/STR) urinary stones. The mean values of the combined results were, copper 4.24, zinc 1302, zinc 1302.10, lead 23.25, iron 36.83,nickel 0.69, chromium 1.93, magnesium 4530441, sodium 54.13 and potassium 5.93 ng mg/sup -1/. It was observed that zinc, aluminum and potassium levels were higher than in calcium oxalate(CaOx) calculi 0.05>P>0.02 and potassium levels were higher than in mixed calcium oxalate-hydroxy appetite (CaOx/APA) calculi, P<0.01. A combination of all the results was also compared with similar data from South Africa, Turkey, Austria, India, U.S.A and Japan. (author)

  5. Blast response of curved carbon/epoxy composite panels: Experimental study and finite-element analysis

    International Nuclear Information System (INIS)

    Phadnis, V A; Roy, A; Silberschmidt, V V; Kumar, P; Shukla, A

    2013-01-01

    Experimental and numerical studies were conducted to understand the effect of plate curvature on blast response of carbon/epoxy composite panels. A shock-tube system was utilized to impart controlled shock loading to quasi-isotropic composite panels with differing range of radii of curvatures. A 3D Digital Image Correlation (DIC) technique coupled with high-speed photography was used to obtain out-of-plane deflection and velocity, as well as in-plane strain on the back face of the panels. Macroscopic post-mortem analysis was performed to compare yielding and deformation in these panels. A dynamic computational simulation that integrates fluid-structure interaction was conducted to evaluate the panel response in general purpose finite-element software ABAQUS/Explicit. The obtained numerical results were compared to the experimental data and showed a good correlation

  6. Adsorption of trace elements on a bentonite sample: experimental study and modelling

    International Nuclear Information System (INIS)

    Hurel, Ch.

    2002-12-01

    Radioactive waste storage in deep underground is studied in France. The alteration of the radioactive waste can mobilize the elements that can migrate to the geosphere. Clays (bentonite) are investigated as major materials constituting the barriers because of their low permeability and high retention capacity. A thermodynamic surface complexation model, based on the component additivity principle was investigated, in order to predict the adsorption behaviour of pollutants in contact with clay. This principle allows an independent determination of each parameter of the model, limiting the fitting procedure of correlated data, and it allows the use of an adsorption thermodynamic database for a solid. The predictions obtained were in good accordance with experimental data. The model could then be applied successfully in performance assessment. (author)

  7. Interpretation of stress measurements around mining cavities in rock salt - a finite-element study

    International Nuclear Information System (INIS)

    Heusermann, S.

    1986-01-01

    Finite-element studies of stress measurements using the overcoring method and of large drift fields in rock salt show that the measurements are affected by local stress relaxation occurring near the test borehole and by general time-dependent stress redistribution in the marginal zones of adjacent drifts. Analysis of the overcoring method indicates that the following local effects have to be considered in the interpretation of the test results as opposed to measurements in elastic rock: The inelastic deformation behaviour of rock salt causes stress relaxation at the pilot borehole which can lead to an underestimation of the actual stress state in rock. During overcoring considerable inelastic deformations occur in rock salt which demand a modified interpretation of the measurements and as a result of stress relaxation at the borehole various tests conditions, such as overcoring diameter, pilot borehole diameter and time between drilling and overcoring, have an effect on the test results. (orig./PW)

  8. Essential element contents in food groups from the second Brazilian total diet study

    International Nuclear Information System (INIS)

    Ambrogi, J.B.; Avegliano, R.P.; Maihara, V.A.

    2016-01-01

    Total diet study (TDS) has been considered as one of the most appropriate approaches to estimate dietary exposure of essential elements. This paper presents preliminary results of concentrations and average dietary daily intakes of Ca, Co, Cr, Fe, K, Na, Se and Zn from the 2nd Brazilian TDS. Nineteen groups from a Food List which represents the daily intake of the population from the Brazilian southeastern region were analyzed by instrumental neutron activation analysis. The dietary daily intake values for Ca (641 mg), Fe (19.6 mg), K (2738 mg), Na (2466 mg), Se (56.4 μg), and Zn (15.3 mg) were higher than the 1st Brazilian TDS. (author)

  9. Final report on fabrication and study of SYNROC containing radioactive waste elements

    International Nuclear Information System (INIS)

    Reeve, K.D.; Levins, D.M.; Seatonberry, B.W.; Ryan, R.K.; Hart, K.P.; Stevens, G.T.

    1987-01-01

    Two facilities for the fabrication and testing of Synroc samples containing separate additions of the transuranic actinides americium, plutonium, curium and neptunium, a fission product solution, and two radioisotopes of caesium and strontium were designed, built and operated by the AAEC at the Lucas Heights Research Laboratories. Twenty-one 75 g batches of radioactive Synroc were made and representative samples were characterised by alpha track etching, scanning electron microscopy and aqueous leach testing, mostly at 70 deg C. Where comparisons were possible, radioactive fission products behaved as expected from non-radioactive tests. The leaching behaviour of the actinides was complex but as a group they were the least leachable of all the elements studied

  10. Academic Spin-off as Triple Helix Element: Case-Study of Russian Regions

    Directory of Open Access Journals (Sweden)

    Konstantin Ivanovich Grasmik

    2016-10-01

    Full Text Available The innovation process is becoming more open. According to the concept of the Triple Helix, this requires the creation of institutions capable of mediating the interaction of agents, primarily related to the different elements of the innovation system. The academic spin-off is not only a form of technology transfer, set up at the university but also the institution that provides the interaction of scientists and entrepreneurs. This article gives an analysis of the implementation of the program of creating academic spin-offs in Russia. The main focus of the study is to analyze the affiliation of university spin-off with other companies, including personal links of founders. Research reveals that linkages are substantially personal: University staff member at the same time could be an entrepreneur. This finding allows not only clarifying the concept of the Triple Helix but also increasing the effectiveness of innovation policy, focusing on employees who can combine science and entrepreneurship.

  11. Study of dynamics, sources and speciation of trace elements in the Orge River watershed (Essonne, France)

    International Nuclear Information System (INIS)

    Le Pape, Pierre

    2012-01-01

    The aim of this work is to study the dynamics of trace elements (TE) in the water column of the Orge River. In the upstream part of the watershed, land uses consist mainly in forests and agricultural soils, whereas downstream, the population density reaches up to 8,000 inh. km"-"2, in the suburbs of Paris Mega-city. The sampling sites were chosen to describe a gradation in urbanization influence from up to downstream in this particularly contrasted catchment. Four sampling campaigns were performed at seven selected sites along the Orge River during an hydrological year (2010/2011). The spatio-temporal monitoring of the concentrations in the dissolved phase ( [fr

  12. LA-ICP-MS Study of Trace Elements in the Chanuskij Metal

    Science.gov (United States)

    Petaev, Michail I.

    2005-01-01

    This progress report covers work done during the second year of the 3-year proposal. During this year we resolved many issues relevant to the analytical technique developed by us for measuring trace elements in meteoritic metals. This technique was used to measure concentrations of Fe, Ni, Co, Cr, Cu, Ga, Ge, As, Mo, Ru, Rh, Pd, Sb, W, Re, Os, Ir, Pt, and Au in eight large (120 - 160 microns) metal grains from both "igneous" and "metamorphic" lithologies of the Chanuskij silicate inclusions. The first application of OUT technique to metal grains from thin sections showed some limitations. Small thickness of metal grains in the thin section limited the signal to 3-4 time-slices instead of 10- 1 1 ones in polished sections of iron meteorites studied before.

  13. Assessment of trace element accumulation by earthworms in an orchard soil remediation study using soil amendments

    Science.gov (United States)

    Centofantia, Tiziana; Chaney, Rufus L.; Beyer, W. Nelson; McConnell, Laura L.; Davis, A. P.; Jackson, Dana

    2016-01-01

    This study assessed potential bioaccumulation of various trace elements in grasses and earthworms as a consequence of soil incorporation of organic amendments for in situ remediation of an orchard field soil contaminated with organochlorine and Pb pesticide residues. In this experiment, four organic amendments of differing total organic carbon content and quality (two types of composted manure, composted biosolids, and biochar) were added to a contaminated orchard field soil, planted with two types of grasses, and tested for their ability to reduce bioaccumulation of organochlorine pesticides and metals in earthworms. The experiment was carried out in 4-L soil microcosms in a controlled environment for 90 days. After 45 days of orchardgrass or perennial ryegrass growth, Lumbricus terrestris L. were introduced to the microcosms and exposed to the experimental soils for 45 days before the experiment was ended. Total trace element concentrations in the added organic amendments were below recommended safe levels and their phytoavailablity and earthworm availability remained low during a 90-day bioremediation study. At the end of the experiment, total tissue concentrations of Cu, Cd, Mn, Pb, and Zn in earthworms and grasses were below recommended safe levels. Total concentrations of Pb in test soil were similar to maximum background levels of Pb recorded in soils in the Eastern USA (100 mg kg−1 d.w.) because of previous application of orchard pesticides. Addition of aged dairy manure compost and presence of grasses was effective in reducing the accumulation of soil-derived Pb in earthworms, thus reducing the risk of soil Pb entry into wildlife food chains.

  14. Morphological, Micoscopical Studies and Elemental analysis of Polygonum Chinese L. and Rhoeo discolor Hance

    International Nuclear Information System (INIS)

    Moe Moe Lwin

    2008-03-01

    In the present study, two selected medicinal plants, namely Polygonum chinense L. (Mahaga-Kyansit) and Rhoeo discolor Hance. (Mi-gwin-gamon) are collected from Dawei District. In this paper, the outstanding features of selected plants, microscopical characters and elemental analysis of these leaves are also presented.In morphological studies of Mahaga-kyansit, herbs, swollen at nodes, black-coloured patches present at central portion of leaf blade, ochreate stipules. The inflorescences are terminally corymbose. The ovary trigonous-ovoid, stigma trifixed. In microscopical studies, stomata anomocytic. The cuticle is striation on both surface. In transverse section of midrib, the vascular bundles are collateral, about 8-10 numbers in basal, one was larger than the other bundles, 2numbers in middle regions and 1 bundle in apical regions. Calcium oxalate crystals (Rosette) are present in the parenchymatous cells. In the present study, the Migwin-gamon are rosette-forming succulent herbs. The leaves are crowded, upright, the upper surface green, the lower surface rich reddish-purple. The inflorescences are axillary, boat-shaped. Flowers involucres bracts. The androecium are stamens 6, often clothed wIth moniliform hairs, anthers often with and expanded or variously modified connective. The gynaecium are carpel 3,, trilocular, stigma capitate. In the microscopical studies, the leaves are isobilateral leaf. The stomata are tetracytic type. Lower epidermis cells larger than the upper one and stoma in the lower epidermis. Crystal of tetragonal system form (Prism) present in the mesophyll cells.

  15. Study on Characteristics of Soil Elements Bio-availability and Their Interrelationship in Black Soil Area of Jilin Province

    Science.gov (United States)

    Wang, D. Y.

    2015-12-01

    Abstract: Based on systematic field investigation and surface soil(0-20cm) sampling in the middle part of Jilin province where the soil type mainly consists of black soil and chernozem, soil total content and bio-available content of Fe, Fe, Ca, Mg, K, P, Cu, Zn, Ni, Cr, B, Cd, As were tested. This paper summarizes the geochemical characteristics of the soil elements and takes the ratio of bio-available content to total content as the bio-availability characteristic of each element in soil and studies the interrelationship between their geochemical characteristics of bio-availability by PCA and correlation analysis. Cd、Cr、Ni、Zn、P、Ca are selected out by PCA due to the similar impact under 4 principal components. And their correlation analysis results indicate: the correlation coefficients between heavy metal elements(Cr, Cd, Zn, Ni) bio-availability are significant positive, i.e., the same spatial variation trends are found between them in study area; the same relationships are also found between the bioavailability of P and 4 heavy metal elements (Cr, Cd, Zn, Ni), the promotion of the bioavailability of heavy metal elements goes with P; However, the correlation coefficients between heavy metal(Cr, Cd, Zn, Ni) bio-availability and Ca are mostly significant negative and the adverse spatial variation trends are found between them. The promotion of the bioavailability of heavy metal elements goes against Ca. Key words: soil geochemistry; soil heavy metals; elements interaction; bio-availability

  16. Multi-element neutron activation analysis of biological tissues: contribution to the study of trace element accumulation as a function of aging

    International Nuclear Information System (INIS)

    Gaudry, Andre.

    1975-01-01

    The accumulation of trace elements in various organs as a function of age was studied in rats, in connection with tissue aging phenomena. Part one reviews the various methods available to develop a programme of simultaneous multi-element analysis in biological matrices. Part two studies the precision and accuracy offered by neutron activation analysis. Special attention is paid to the problem of sample contamination by the silica glass irradiation supports. The possible causes of this effect are mentioned and a procedure limiting its harmful influence is proposed. Part three defines the restrictions introduced by the use of a method to separate the activable matrix. The fourth and last chapter describes the development of a multielement chemical separation system, designed to work semi-automatically for the simultaneous treatment of three samples and a standard in a shielded cell of small dimensions. The principles of a multi-comparator calibration where a knowledge of certain conventional but imprecise nuclear data is unnecessary owing to an experimental expedient are outlined briefly. Finally the separation method is tried out on various biological samples, including a reference (bovine liver SRM1577-NBS), and some results are given [fr

  17. In vivo trace element speciation study by using enriched stable isotopic tracer technique

    International Nuclear Information System (INIS)

    Feng Weiyue; Chai Zhifang; Shi Junwen; Ding Wenjun

    2005-01-01

    In contrast to the radioactive tracer method, the enriched stable isotopic technique used in life sciences will not cause radiation damage to cells and its operation will be no radioactive risk, In our laboratory, the enriched stable isotopes Cr-50, Hg-196 and Hg-198 combined with biochemical separation, neutron activation analysis (NAA) and inductively coupled plasma mass spectrometry (ICP-IVIS) have been used to investigate the element speciation in vivo. Chromium (Cr) is proposed to act as a potentiator of insulin action in animals and human beings. Its deficiency induces the symptoms resembling diabetes and its supplement can alleviate these symptoms. However, as the concentration of Cr in vivo is usually at ultratrace level(- ng/g), its speciation study is usually difficult, since it is almost impossible to avoid the exogenous Cr contamination caused by separation and determination processes. Therefore, in this study, 50 Cr 2 O 3 with 94.2% 50 Cr was used as a tracer combined with gel chromatography to study the Cr speciation in serum, liver, urine and other tissues of healthy and diabetic rats. The Cr concentrations can be determined via 50 Cr(n, γ) 51 Cr by NAA, which is ideally suited for the ultratrace element analyses due to its high precision, accuracy and sensitivity. Such research have found that the most quantity of chromium in vivo is mainly combined with high molecular weight proteins, which is later identified as transferrin and low molecular weight protein is mainly excreted from urine. Mercury is listed by the International Program of Chemical Safety as one of the six most dangerous chemicals in the global environment. Mercury compounds in the environment are often difficult to degrade. However, the mechanism on mercury toxicity to developing children following long term and low dose of mercury exposure is still not clear. Therefore, high sensitive method in vivo needs to be developed to study such low level mercury toxicity to fetus In this

  18. A review of Human Biomonitoring studies of trace elements in Pakistan.

    Science.gov (United States)

    Waseem, Amir; Arshad, Jahanzaib

    2016-11-01

    Human biomonitoring (HBM) measures the concentration levels of substances or their metabolites in human body fluids and tissues. HBM of dose and biochemical effect monitoring is an effective way of measuring human exposure to chemical substances. Many countries have conducted HBM studies to develop a data base for many chemicals including trace metals of health concern for their risk assessment and risk management. However, in Pakistan, HBM program on large scale for general population does not exist at present or in the past has been reported. Various individual HBM studies have been reported on the assessment of trace elements (usually heavy metals) from Pakistan; most of them are epidemiological cross sectional surveys. In this current review we tried to develop a data base of HBM studies of trace elements namely arsenic, cadmium, copper, chromium, iron, lead, manganese, nickel, and zinc in biological fluids (blood, urine) and tissues (hair, nails) in general population of Pakistan. Studies from all available sources have been explored, discussed and presented in the form of tables and figures. The results of these studies were critically compared with large scale HBM programs of other countries, (US & European communities etc). It was observed from the present study that the most of the toxic metals in biological fluids/tissues in general population of Pakistan, have higher background values comparatively. For example the mean values of toxic metals like As, Cd, Cr, Ni, and Pb in blood of general population were found as 2.08 μg/L, 4.24 μg/L, 60.5 μg/L, 1.95 μg/L, 198 μg/L respectively. Similarly, the urine mean values of 67.6 μg/L, 3.2 μg/L, 16.4 μg/L, 6.2 μg/L and 86.5 μg/L were observed for As, Cd, Cr, Ni, and Pb respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Studies in the Philippines on ingestion and organ content of trace elements of importance to radiological protection

    International Nuclear Information System (INIS)

    Natera, E.S.

    1998-01-01

    The first Coordinated Research Program on Reference Asian Man (RAM) was conducted for a period of six years. The study dealt with the collection of data in four areas namely: (1) anthropometric measurements, (2) organ mass measurements, (3) nutritional and dietary intake, and (4) pulmonary and water balance studies. Based on the research needs with reference to radiation protection, dietary intake and tissue analysis appear to be important aspects of the RAM. Information to be generated from the elemental analysis of food and tissue would be used to characterize the intake, retention and release of radioactive elements coming from different population groups. This study also aims to establish the elemental composition profile of the average Filipino using simple and accurate methods of measurements. This report will present the protocol which is based to the extent possible on prescribed procedures required for the study. A standardized Protocol to be used in the study is important since stable elements are present only in trace quantities in biological samples of interest. The procedures presented in this document include: collection of one day diet samples and tissue samples (lung, liver, skeletal muscle, thyroid, bone and kidney) from average healthy adult Filipino. The sample treatment and preparation, analytical measurements, data evaluation and reporting will complete said protocol. The elements that are of importance to radiation protection are iodine, cesium, strontium, thorium, and uranium. The essential minor elements are calcium, potassium and sodium. Trace elements like copper. manganese, iron, selenium and zinc will also be included in the analysis. Concentrations of common toxic elements such as mercury, cadmium and lead may likewise be reported in this study. (author)

  20. [Hygienic study of an activated fibrous charcoal material as a sorbing filtering element for drinking water afterpurification].

    Science.gov (United States)

    Prokopov, V A; Mironets, N V; Gakal, R K; Maktaz, E D; Dugan, A M; Teteneva, I A; Tarabarova, S B; Martyshchenko, N V; Nadvornaia, Zh D

    1993-01-01

    The results of complex toxicological and hygienic study showed that the quality of pipe water filtered through the activated carbonic fibrous material (ACFM) "Dnepr-F" forming a part of absorptive filtering element improved markedly. The content of organic substances decreased drastically as well as that of nitrates and iron. Microbiological indices did not suffer appreciable changes and were within permissible limits. The water filtered through the absorptive element with ACFM had no adverse influence on the organisms of warm-blooded animals. Proceeding from foregoing one can conclude that the "Dnepr-F" may be recommended as a part of absorptive filtering element for the final refinement of drinking water.

  1. Therapeutic efficacy of cyclic home elemental enteral alimentation in Crohn's disease: Japanese cooperative Crohn's disease study.

    Science.gov (United States)

    Matsueda, K; Shoda, R; Takazoe, M; Hiwatashi, N; Bamba, T; Kobayashi, K; Saito, T; Terano, A; Yao, T

    1995-11-01

    Crohn's disease (CD) often flares up and requires frequent hospitalization and/or surgery. Cyclic home elemental enteral alimentation (C-HEEA) was developed to prevent flare-up of CD and to minimize patient hospitalization. However, its therapeutic efficacy has not been studied in a large patient population. Therefore, questionnaires were sent to members of the Inflammatory Bowel Disease (IBD) Research Group of Japan to evaluate the therapeutic efficacy of C-HEEA and to define the factors that may affect the efficacy of the treatment. Data for 410 patients (C-HEEA-treated n = 322; drug-treated n = 88) were collected from 29 institutions and analysis showed the following results. The cumulative remission and non-hospitalization rates of the C-HEEA treated group were significantly higher than the rates of the drug-treated group in all patients and in those with ileitis and ileo-colitis (P < 0.0001, P < 0.001, and P < 0.01, respectively), but no significant difference was noted in patients with colitis. Cumulative remission and non-hospitalization rates were also influenced by the daily calorie content of the elemental diet (ED); more than 1200 kcal of the ED per day was found to be more effective than lower amounts to maintain remission and to prevent hospitalization. The therapeutic efficacy of C-HEEA was shown to be superior to that of drug treatment in patients with CD with ileal involvement, and it is suggested that more than 1200kcal per day should be supplied by the ED to enhance its therapeutic efficacy.

  2. Effect of impurities and electrolyte thickness on degradation of pure magnesium: A finite element study

    Energy Technology Data Exchange (ETDEWEB)

    Montoya, R., E-mail: rodrigo.montoya@cenim.csic.es [Centro Nacional de Investigaciones Metalurgicas, CENIM, CSIC, Avda. Gregorio del Amo 8, 28040 Madrid (Spain); Departamento de Matematicas, Facultad de Quimica, Universidad Nacional Autonoma de Mexico, UNAM, Ciudad Universitaria, 04510 Mexico D.F. (Mexico); Departamento de Ingenieria Metalurgica, Facultad de Quimica, Universidad Nacional Autonoma de Mexico, UNAM, Ciudad Universitaria, 04510 Mexico D.F. Mexico (Mexico); Escudero, M.L., E-mail: escudero@cenim.csic.es [Centro Nacional de Investigaciones Metalurgicas, CENIM, CSIC, Avda. Gregorio del Amo 8, 28040 Madrid (Spain); Garcia-Alonso, M.C., E-mail: crisga@cenim.csic.es [Centro Nacional de Investigaciones Metalurgicas, CENIM, CSIC, Avda. Gregorio del Amo 8, 28040 Madrid (Spain)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer Degradation of Mg due to the presence of impurities by finite element method. Black-Right-Pointing-Pointer A thin film of electrolyte causes galvanic corrosion focused only close on impurities. Black-Right-Pointing-Pointer A thick layer of electrolyte provokes galvanic corrosion extended the whole surface. Black-Right-Pointing-Pointer A higher number of impurities causes galvanic corrosion on the Mg surface independently of electrolyte thickness. Black-Right-Pointing-Pointer The electrolyte thickness is an important variable that affects the in vivo degradation. - Abstract: The aim of this work is to study the degradation of magnesium due to the presence of impurities, by finite element method (FEM), when different thickness of physiological medium bathes the surface. The electrochemical experimental data obtained from polarization curves are used to model mathematically the corrosion process by solving the Laplace equation and the proper boundary conditions by means of FEM. The results show that when Mg is covered by a thin film of electrolyte, galvanic corrosion is focused only on the areas located really close to the cathodic sites, and far from the impurities, the Mg matrix remains near to its corrosion potential with a natural corrosion process. However, if the Mg matrix is completely covered by a thick layer of electrolyte the potentials obtained in the Mg surface far from the impurity are higher than its corrosion potential, so the Mg suffers more severe galvanic corrosion. On the other hand, when a higher number of impurities is considered, the Mg matrix is anodically polarized and it suffers severe galvanic corrosion, independently of h. The thickness of the electrolyte h must be considered as an important variable that affects the in vivo degradation.

  3. Effect of impurities and electrolyte thickness on degradation of pure magnesium: A finite element study

    International Nuclear Information System (INIS)

    Montoya, R.; Escudero, M.L.; García-Alonso, M.C.

    2011-01-01

    Highlights: ► Degradation of Mg due to the presence of impurities by finite element method. ► A thin film of electrolyte causes galvanic corrosion focused only close on impurities. ► A thick layer of electrolyte provokes galvanic corrosion extended the whole surface. ► A higher number of impurities causes galvanic corrosion on the Mg surface independently of electrolyte thickness. ► The electrolyte thickness is an important variable that affects the in vivo degradation. - Abstract: The aim of this work is to study the degradation of magnesium due to the presence of impurities, by finite element method (FEM), when different thickness of physiological medium bathes the surface. The electrochemical experimental data obtained from polarization curves are used to model mathematically the corrosion process by solving the Laplace equation and the proper boundary conditions by means of FEM. The results show that when Mg is covered by a thin film of electrolyte, galvanic corrosion is focused only on the areas located really close to the cathodic sites, and far from the impurities, the Mg matrix remains near to its corrosion potential with a natural corrosion process. However, if the Mg matrix is completely covered by a thick layer of electrolyte the potentials obtained in the Mg surface far from the impurity are higher than its corrosion potential, so the Mg suffers more severe galvanic corrosion. On the other hand, when a higher number of impurities is considered, the Mg matrix is anodically polarized and it suffers severe galvanic corrosion, independently of h. The thickness of the electrolyte h must be considered as an important variable that affects the in vivo degradation.

  4. Study of a Tricarbide Grooved Ring Fuel Element for Nuclear Thermal Propulsion

    Science.gov (United States)

    Taylor, Brian; Emrich, Bill; Tucker, Dennis; Barnes, Marvin; Donders, Nicolas; Benensky, Kelsa

    2018-01-01

    Deep space exploration, especially that of Mars, is on the horizon as the next big challenge for space exploration. Nuclear propulsion, through which high thrust and efficiency can be achieved, is a promising option for decreasing the cost and logistics of such a mission. Work on nuclear thermal engines goes back to the days of the NERVA program. Currently, nuclear thermal propulsion is under development again in various forms to provide a superior propulsion system for deep space exploration. The authors have been working to develop a concept nuclear thermal engine that uses a grooved ring fuel element as an alternative to the traditional hexagonal rod design. The authors are also studying the use of carbide fuels. The concept was developed in order to increase surface area and heat transfer to the propellant. The use of carbides would also raise the operating temperature of the reactor. It is hoped that this could lead to a higher thrust to weight nuclear thermal engine. This paper describes the modeling of neutronics, heat transfer, and fluid dynamics of this alternative nuclear fuel element geometry. Fabrication experiments of grooved rings from carbide refractory metals are also presented along with material characterization and interactions with a hot hydrogen environment. Results of experiments and associated analysis are discussed. The authors demonstrated success in reaching desired densities with some success in material distribution and reaching a solid solution. Future work is needed to improve distribution of material, minimize oxidation during the milling process, and define a fabrication process that will serve for constructing grooved ring fuel rods for large system tests.

  5. Skeletal response to maxillary protraction with and without maxillary expansion: a finite element study.

    Science.gov (United States)

    Gautam, Pawan; Valiathan, Ashima; Adhikari, Raviraj

    2009-06-01

    The purpose of this finite element study was to evaluate biomechanically 2 treatment modalities-maxillary protraction alone and in combination with maxillary expansion-by comparing the displacement of various craniofacial structures. Two 3-dimensional analytical models were developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young skull. AutoCAD software (2004 version, Autodesk, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Cincinnati, Ohio) were used. The model consisted of 108,799 solid 10 node 92 elements, 193,633 nodes, and 580,899 degrees of freedom. In the first model, maxillary protraction forces were simulated by applying 1 kg of anterior force 30 degrees downward to the palatal plane. In the second model, a 4-mm midpalatal suture opening and maxillary protraction were simulated. Forward displacement of the nasomaxillary complex with upward and forward rotation was observed with maxillary protraction alone. No rotational tendency was noted when protraction was carried out with 4 mm of transverse expansion. A tendency for anterior maxillary constriction after maxillary protraction was evident. The amounts of displacement in the frontal, vertical, and lateral directions with midpalatal suture opening were greater compared with no opening of the midpalatal suture. The forward and downward displacements of the nasomaxillary complex with maxillary protraction and maxillary expansion more closely approximated the natural growth direction of the maxilla. Displacements of craniofacial structures were more favorable for the treatment of skeletal Class III maxillary retrognathia when maxillary protraction was used with maxillary expansion. Hence, biomechanically, maxillary protraction combined with maxillary expansion appears to be a superior treatment modality for the treatment of maxillary retrognathia than maxillary protraction alone.

  6. A FINITE-ELEMENTS APPROACH TO THE STUDY OF FUNCTIONAL ARCHITECTURE IN SKELETAL-MUSCLE

    NARCIS (Netherlands)

    OTTEN, E; HULLIGER, M

    1994-01-01

    A mathematical model that simulates the mechanical processes inside a skeletal muscle under various conditions of muscle recruitment was formulated. The model is based on the finite-elements approach and simulates both contractile and passive elastic elements. Apart from the classic strategy of

  7. Study of behavior of cermet fuel elements on IGR reactor under RIA type accident condition

    International Nuclear Information System (INIS)

    Vasil'ev, Yu.S.; Vurim, A.D.; Koltyshev, S.M.; Pakhnits, V.A.; Tukhvatulin, Sh.T.; Popov, V.V.; Ryzhkov, A.N.

    1996-01-01

    In 1993 December in IGR reactor of Inst. of Atomic Energy of National Nuclear Center of Republic of Kazakstan the second batch of in-pile testing of perspective cermet fuel elements under the condition, simulating RIA type accident was conducted. In the second batch of testing during eight start-ups 10 cermet fuel elements were examined. Among which 8 of monolith type and 2 fuel elements with false jacket beside cladding (FJF), as well as, 6 standard fuel elements of WWER-1000 type reactor with dioxide fuel were tested. 2 fuel elements - cermet and standard were placed into capsule filled with water. To measure energy release for the each start-up two fission monitor and inside core control gauge were placed. In all the start-ups operation mode of IGR was neutron pulse. Power of fuel element kept changing from 151 to 336 k W; energy release was 38-93 kJ/gr m 235 U; maximum temperature of cermet fuel was 1943-2173 K, of dioxide fuel - 1923-2843 K. The testing has demonstrated that operability of cermet fuel elements under reactivity accident condition with pulse width of 0,2 s is, at least, not less that operability of dioxide fuel elements, through advantages of cermet fuel under these conditions are revealed to the least extent

  8. WWR-M reactor fuel elements as objects of permanent study and modernization

    International Nuclear Information System (INIS)

    Kirsanov, G.A.; Konoplev, K.A.; Poltavski, A.S.; Zakharov, A.S.

    2005-01-01

    Brief description of WWR-M5 thin-walled fuel elements and review of possible improvement of parameters for reactor type WWR-M and WWR-SM during transition from fuel elements HEU and LEU WWR-M2 to LEU WWR-M5 is presented. (author)

  9. Bejing synchrotron radiation TXRF facility and its applications on trace element study of cells

    International Nuclear Information System (INIS)

    Yuying, H.; Yingrong, W.; Limin, Z.; Guangcheng, L.; Wie, H.

    2000-01-01

    In this paper, Beijing synchrotron radiation TXRF facility and experimental method were described. The minimum detection limits of some elements were tested by using several kinds of standard reference materials. The feasibility of using TXRF in biomedical field is discussed. With this technique small intestine cells of both normal and radiated white mice were analyzed, and the elemental average contents of each single cell are also given. The results indicated that the contents of some trace elements for normal and radiated white mice are greatly different, which may be used to provide valuable reference for clinic medicine. On the other hand, the trace elements of cells of lung and cervix cancer before and after apoptosis were determined by SRTXRF and the changes of trace elements in these cells were discussed. (author)

  10. A study on toxic and essential elements in wheat grain from the Republic of Kazakhstan.

    Science.gov (United States)

    Tattibayeva, Damira; Nebot, Carolina; Miranda, Jose M; Abuova, Altynai B; Baibatyrov, Torebek A; Kizatova, Maigul Z; Cepeda, Alberto; Franco, Carlos M

    2016-03-01

    Little information is currently available about the content of different elements in wheat samples from the Republic of Kazakhstan. The concentrations of toxic (As, Cd, Cr, Hg, Pb, and U) and essential (Co, Cu, Fe, Mn, Ni, Se, and Zn) elements in 117 sampled wheat grains from the Republic of Kazakhstan were measured. The results indicated that the mean and maximum concentrations of most investigated elements (As, Cd, Co, Cr, Mn, Se, Pb, and U) were higher in samples collected from southern Kazakhstan. The mean and maximum concentrations of toxic elements such as As, Cd, Hg, and Pb did not exceed levels specified by European, FAO, or Kazakh legislation, although the hazard quotient (HQ) values for Co, Cu, Mn, and Zn were higher than 1 and the hazard index (HI) was higher than 1 for samples collected from all areas of Kazakhstan. This indicates that there should be concern about the potential hazards of the combination of toxic elements in Kazakh wheat.

  11. Use of multivariate and neutron activation analysis on studying element interrelationships in Brazilian phosphorite

    International Nuclear Information System (INIS)

    Delgado, J.U.; Carvalho, J.L.S.; Tauhata, L.

    1993-01-01

    Methods to determine U, Th and other constituent elements in mineral matrices through Instrumental Neutron Activation Analysis (INAA), have been widely utilized due to their capability to extract a large quantity of information from small samples. In the present work, an experimental methodology based on INAA associated to the cluster statistics technique was used to determine the uranium concentration and its correlation with other elements present in the mineral phosphorites from the northeast region of Brazil. Data for 22 elements including rare-earth elements are presented. A good correlation between uranium and rare-earth elements is observed. For the transition metals, correlation with uranium was not noted. (author) 11 refs.; 2 figs.; 1 tab

  12. A Study of Coal Miners’ Safety Psychological Elements Based on Questionnaire Survey

    Directory of Open Access Journals (Sweden)

    Li Zeng-bo

    2016-01-01

    Full Text Available During the production process, the instability of safety psychological elements of coal miners contributes to unsafe behaviors that may result in fatal accident. To search the dominant psychological elements, three types of unsafe psychology, comprising 18 unsafe psychological elements, are obtained by theoretical analysis and site survey. Then, an assessment model is established, and a matched questionnaire is applied to two large modern coal mines in Inner Mongolia Autonomous Region. Based on questionnaire survey results and analytic hierarchy process (AHP, assessment judgment matrixes are constructed, effect weight is calculated, and consistency check is conducted. The analysis results show that safety psychology elements of defective type are the dominant elements that trigger unsafe behaviors of coal miners.

  13. Study of selected trace elements in cancerous and non-cancerous human breast tissues using neutron activation analysis

    International Nuclear Information System (INIS)

    Ebrahim, A. M.

    2006-03-01

    This study was performed to investigate the influence of cancer on selected trace elements among sudanese patients with confirmed breast cancer. Eighty samples of cancerous and normal tissues (total of one hundred and sixty) were obtained from the same breast of the same subject from different hospitals in Khartoum State. Samples were freeze dried and analyzed using neutron activation analysis (NAA). Neutron irradiations were performed at Egypt second research reactor with a maximum thermal flux of 2.37 Χ 10 14 n cm -2 s -1 . To examine if there was any difference in the concentrations of elements from normal and malignant tissues; Wilcox on signed ranks test was used. It was found that Al, Mn, Mg, Se, Zn, and Cr elements from the malignant tissues are significantly elevated (p 0.05). The results obtained have shown consistency with results obtained by some previous studies, however, no data could be found for the elements Mg, Cr, and Sc.(Author)

  14. Feasibility study on using three element TLD badge based on CaSO4:Dy as environmental dosimeter

    International Nuclear Information System (INIS)

    Choudhary, Sreeletha; BharathiLashmi, G.V.; Yasotha, E.; Devanathan, P.S.; Annalakshmi, O.; Mathiyarasu, R.

    2018-01-01

    A three element thermoluminescence badge based on CaSO 4 :Dy is used for personnel monitoring in India. The three discs of the badge is heated in sequential manner by hot nitrogen gas and from the amount of light emitted while heating, the doses are estimated. This badge was redesigned as a two element system and is used for environmental monitoring. Though the two element badge has some advantages, the software used for processing of TLDs in the semiautomatic reader has to be modified and separate badges has to be maintained for environmental dose measurements. In this work a feasibility study has been carried out to use the three element personnel monitoring badge itself for environmental monitoring also. This study was also carried out to understand the abnormal pattern of the glow curves observed in some field cards

  15. Translating the Elements of Health Governance for Integrated Care from Theory to Practice: A Case Study Approach.

    Science.gov (United States)

    Nicholson, Caroline; Hepworth, Julie; Burridge, Letitia; Marley, John; Jackson, Claire

    2018-01-31

    Against a paucity of evidence, a model describing elements of health governance best suited to achieving integrated care internationally was developed. The aim of this study was to explore how health meso-level organisations used, or planned to use, the governance elements. A case study design was used to offer two contrasting contexts of health governance. Semi-structured interviews were conducted with participants who held senior governance roles. Data were thematically analysed to identify if the elements of health governance were being used, or intended to be in the future. While all participants agreed that the ten elements were essential to developing future integrated care, most were not used. Three major themes were identified: (1) organisational versus system focus, (2) leadership and culture, and, (3) community (dis)engagement. Several barriers and enablers to the use of the elements were identified and would require addressing in order to make evidence-based changes. Despite a clear international policy direction in support of integrated care this study identified a number of significant barriers to its implementation. The study reconfirmed that a focus on all ten elements of health governance is essential to achieve integrated care.

  16. Finite element study of scaffold architecture design and culture conditions for tissue engineering.

    Science.gov (United States)

    Olivares, Andy L; Marsal, Elia; Planell, Josep A; Lacroix, Damien

    2009-10-01

    Tissue engineering scaffolds provide temporary mechanical support for tissue regeneration and transfer global mechanical load to mechanical stimuli to cells through its architecture. In this study the interactions between scaffold pore morphology, mechanical stimuli developed at the cell microscopic level, and culture conditions applied at the macroscopic scale are studied on two regular scaffold structures. Gyroid and hexagonal scaffolds of 55% and 70% porosity were modeled in a finite element analysis and were submitted to an inlet fluid flow or compressive strain. A mechanoregulation theory based on scaffold shear strain and fluid shear stress was applied for determining the influence of each structures on the mechanical stimuli on initial conditions. Results indicate that the distribution of shear stress induced by fluid perfusion is very dependent on pore distribution within the scaffold. Gyroid architectures provide a better accessibility of the fluid than hexagonal structures. Based on the mechanoregulation theory, the differentiation process in these structures was more sensitive to inlet fluid flow than axial strain of the scaffold. This study provides a computational approach to determine the mechanical stimuli at the cellular level when cells are cultured in a bioreactor and to relate mechanical stimuli with cell differentiation.

  17. Study of the oxides nature effect of rare and rare earth elements on the aluminium-chromium catalyst properties

    International Nuclear Information System (INIS)

    Dadashev, B.A.; Abbasov, S.G.; Sarydzhanov, A.A.; AN Azerbajdzhanskoj SSR, Baku. Inst. Neftekhimicheskikh Protsessov)

    1975-01-01

    Adsorption studies have shown that oxides of rare and rare earth elements REE appreciably influence the structure of aluminium-chrome catalyst. Alkaline promotors, unlike REE, contribute to the formation of developed contact surface. Electrophysical investigations show that oxides of rare elements introduced into the catalyst increase its conductivity and activation energy. As for REE oxides, they decrease the conductivity and increase the activation energy. Catalysts with developed surface and high conductivity are also more active in the reaction of isopentane dehydration

  18. Standard elements; Elements standards

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Following his own experience the author recalls the various advantages, especially in the laboratory, of having pre-fabricated vacuum-line components at his disposal. (author) [French] A la suite de sa propre experience, l'auteur veut rappeler les divers avantages que presente, tout particulierement en laboratoire, le fait d'avoir a sa disposition des elements pre-fabriques de canalisations a vide. (auteur)

  19. Mandibular canine intrusion with the segmented arch technique: A finite element method study.

    Science.gov (United States)

    Caballero, Giselle Milagros; Carvalho Filho, Osvaldo Abadia de; Hargreaves, Bernardo Oliveira; Brito, Hélio Henrique de Araújo; Magalhães Júnior, Pedro Américo Almeida; Oliveira, Dauro Douglas

    2015-06-01

    Mandibular canines are anatomically extruded in approximately half of the patients with a deepbite. Although simultaneous orthodontic intrusion of the 6 mandibular anterior teeth is not recommended, a few studies have evaluated individual canine intrusion. Our objectives were to use the finite element method to simulate the segmented intrusion of mandibular canines with a cantilever and to evaluate the effects of different compensatory buccolingual activations. A finite element study of the right quadrant of the mandibular dental arch together with periodontal structures was modeled using SolidWorks software (Dassault Systèmes Americas, Waltham, Mass). After all bony, dental, and periodontal ligament structures from the second molar to the canine were graphically represented, brackets and molar tubes were modeled. Subsequently, a 0.021 × 0.025-in base wire was modeled with stainless steel properties and inserted into the brackets and tubes of the 4 posterior teeth to simulate an anchorage unit. Finally, a 0.017 × 0.025-in cantilever was modeled with titanium-molybdenum alloy properties and inserted into the first molar auxiliary tube. Discretization and boundary conditions of all anatomic structures tested were determined with HyperMesh software (Altair Engineering, Milwaukee, Wis), and compensatory toe-ins of 0°, 4°, 6°, and 8° were simulated with Abaqus software (Dassault Systèmes Americas). The 6° toe-in produced pure intrusion of the canine. The highest amounts of periodontal ligament stress in the anchor segment were observed around the first molar roots. This tooth showed a slight tendency for extrusion and distal crown tipping. Moreover, the different compensatory toe-ins tested did not significantly affect the other posterior teeth. The segmented mechanics simulated in this study may achieve pure mandibular canine intrusion when an adequate amount of compensatory toe-in (6°) is incorporated into the cantilever to prevent buccal and lingual crown

  20. Astronaut Bone Medical Standards Derived from Finite Element (FE) Models of QCT Scans from Population Studies

    Science.gov (United States)

    Sibonga, J. D.; Feiveson, A. H.

    2014-01-01

    This work was accomplished in support of the Finite Element [FE] Strength Task Group, NASA Johnson Space Center [JSC], Houston, TX. This group was charged with the task of developing rules for using finite-element [FE] bone-strength measures to construct operating bands for bone health that are relevant to astronauts following exposure to spaceflight. FE modeling is a computational tool used by engineers to estimate the failure loads of complex structures. Recently, some engineers have used this tool to characterize the failure loads of the hip in population studies that also monitored fracture outcomes. A Directed Research Task was authorized in July, 2012 to investigate FE data from these population studies to derive these proposed standards of bone health as a function of age and gender. The proposed standards make use of an FE-based index that integrates multiple contributors to bone strength, an expanded evaluation that is critical after an astronaut is exposed to spaceflight. The current index of bone health used by NASA is the measurement of areal BMD. There was a concern voiced by a research and clinical advisory panel that the sole use of areal BMD would be insufficient to fully evaluate the effects of spaceflight on the hip. Hence, NASA may not have a full understanding of fracture risk, both during and after a mission, and may be poorly estimating in-flight countermeasure efficacy. The FE Strength Task Group - composed of principal investigators of the aforementioned population studies and of FE modelers -donated some of its population QCT data to estimate of hip bone strength by FE modeling for this specific purpose. Consequently, Human Health Countermeasures [HHC] has compiled a dataset of FE hip strengths, generated by a single FE modeling approach, from human subjects (approx.1060) with ages covering the age range of the astronauts. The dataset has been analyzed to generate a set of FE strength cutoffs for the following scenarios: a) Qualify an

  1. Boundary element inverse analysis for rebar corrosion detection: Study on the 2004 tsunami-affected structure in Aceh

    Directory of Open Access Journals (Sweden)

    S. Fonna

    2018-06-01

    Full Text Available Evaluation of rebar/reinforcing-steel corrosion for the 2004 tsunami-affected reinforced concrete (RC buildings in Aceh was conducted using half-cell potential mapping technique. However, the results only show qualitative meaning as corrosion risk rather than the corrosion itself, such as the size and location of corrosion. In this study, boundary element inverse analysis was proposed to be performed to detect rebar corrosion of the 2004 tsunami-affected structure in Aceh, using several electrical potential measurement data on the concrete surface. One RC structure in Peukan Bada, an area heavily damaged by the tsunami, was selected for the study. In 2004 the structure was submerged more than 5 m by the tsunami. Boundary element inverse analysis was developed by combining the boundary element method (BEM and particle swarm optimization (PSO. The corrosion was detected by evaluating measured and calculated electrical potential data. The measured and calculated electrical potential on the concrete surface was obtained by using a half-cell potential meter and by performing BEM, respectively. The solution candidates were evaluated by employing PSO. Simulation results show that boundary element inverse analysis successfully detected the size and location of corrosion for the case study. Compared with the actual corrosion, the error of simulation result was less than 5%. Hence, it shows that boundary element inverse analysis is very promising for further development to detect rebar corrosion. Keywords: Inverse analysis, Boundary element method, PSO, Corrosion, Reinforced concrete

  2. Study on trace and rare earth elements in Indonesian oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Jing-ru; Wang, Qing; Liu, Hong-peng; Bai, Zhang [Northeast Dianli Univ., Jilin (China). Engineering Research Centre

    2013-07-01

    Major, trace elements and rare earth and mineral composition of the oil sand samples (ST1, ST2, ST3) and the oil sand retorting residue (semi-coke: SC1, SC2, SC3) from Indonesian were determined by XFS, ICP-MS and XRD methods. The trace elements content in oil sand is pretty much the same thing in Earth's Clarke value. The trace element is abundantly in earth's Clarke, in oil sand yet, for Ti, Mn, Ba, Sr, but these elements are lower enrichment. However, the Cr (EF = 16.8) and Mo (EF = 11.8) are ''enrichment'' in ST1; the Ni (EF =10.5), Se (EF = 17.5), Sr (EF = 28.7), Mo (EF = 106.5), Sc (EF = 12.8) and U (EF = 43.2) are ''enrichment'' in ST2; the Se (EF = 12.6), Sr (EF = 18.4), Mo (EF = 47.5), and U (EF = 27.8) are ''enrichment'' in ST3. Calculations show that trace elements in sime-coke have lower evaporation rate during Fischer Assay. Trace elements in raw oil sand are so stable that trace elements can't move easily to other pyrolysis product but enrich to sime-coke. After retorting, more elements are EF > 10, such as B, V, Ni, As, Se, Sr, Mo, Hg, Cs and U. It is essential to take the pollution produced by trace elements in sime-coke during the sime-coke utilization into consideration. The REEs content had a high correlation with the ash in oil sand. The REE is closely related to terrigenous elastic rocks.

  3. Remedial Investigation/Feasibility Study (RI/FS) process, elements and techniques guidance

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This manual provides detailed guidance on Remedial Investigation/Feasibility Studies (RI/FSs) conducted pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) at Department of Energy (DOE) facilities. The purpose of the RI/FS, to assess the risk posed by a hazardous waste site and to determine the best way to reduce that risk, and its structure (site characterization, risk assessment, screening and detailed analysis of alternatives, etc.) is defined in the National Oil and Hazardous Substances Pollution Contingency Plan (NCP) and further explained in the Environmental Protection Agency`s (EPA`s) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA (Interim Final) 540/G-89/004, OSWER Directive 9355.3-01, October 1988. Though issued in 1988, the EPA guidance remains an excellent source of information on the conduct and structure of an RI/FS. This document makes use of supplemental RI/FS-related guidance that EPA has developed since its initial document was issued in 1988, incorporates practical lessons learned in more than 12 years of experience in CERCLA hazardous site remediation, and drawing on those lessons, introduces the Streamlined Approach For Environmental Restoration (SAFER), developed by DOE as a way to proceed quickly and efficiently through the RI/FS process at DOE facilities. Thus as its title implies, this guidance is intended to describe in detail the process and component elements of an RI/FS, as well as techniques to manage the RI/FS effectively.

  4. Two Dimensional Finite Element Model to Study Calcium Distribution in Oocytes

    Science.gov (United States)

    Naik, Parvaiz Ahmad; Pardasani, Kamal Raj

    2015-06-01

    Cytosolic free calcium concentration is a key regulatory factor and perhaps the most widely used means of controlling cellular function. Calcium can enter cells through different pathways which are activated by specific stimuli including membrane depolarization, chemical signals and calcium depletion of intracellular stores. One of the important components of oocyte maturation is differentiation of the Ca2+ signaling machinery which is essential for egg activation after fertilization. Eggs acquire the ability to produce the fertilization-specific calcium signal during oocyte maturation. The calcium concentration patterns required during different stages of oocyte maturation are still not completely known. Also the mechanisms involved in calcium dynamics in oocyte cell are still not well understood. In view of above a two dimensional FEM model has been proposed to study calcium distribution in an oocyte cell. The parameters such as buffers, ryanodine receptor, SERCA pump and voltage gated calcium channel are incorporated in the model. Based on the biophysical conditions the initial and boundary conditions have been framed. The model is transformed into variational form and Ritz finite element method has been employed to obtain the solution. A program has been developed in MATLAB 7.10 for the entire problem and executed to obtain numerical results. The numerical results have been used to study the effect of buffers, RyR, SERCA pump and VGCC on calcium distribution in an oocyte cell.

  5. Dendro-analysis: the study of trace elements in tree rings

    International Nuclear Information System (INIS)

    Gilboy, W.B.; Tout, R.E.; Spyrou, N.M.

    1976-01-01

    In attempts to study environmental contamination over long time scales into the past, the levels of trace and minor elements in individual tree rings have been measured using instrumental neutron activation analysis. Most measurements so far have been done on elm tree samples which are widely available due to a current epidemic of Dutch Elm disease in southern England. Samples taken from every growth ring were individually activated for ten minutes in a thermal neutron flux of 1.5 x 10 12 n cm -2 sec -1 in the 100 kW London University research reactor. The activated samples were counted for ten minutes on a 42 cm 3 Ge(Li) gamma ray detector. These procedures enabled the following radioisotopes to be monitored for a large number of samples: 19 0, 24 Na, 27 Mg, 28 Al, 38 Cl, 42 K, 49 Ca, 56 Mn, 66 Cu, 80 Br, 87 /sup m/Sr, 41 Ar, 128 I, 139 Ba. Some of the above isotopes show striking systematic variations both from ring to ring in a radial direction, and also around individual rings. Results are described in detail for samples taken from trees grown in various locations and assesses the potential of this technique for studying past environmental conditions

  6. Studies in Korea on ingestion of trace elements of importance in radiological protection

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Seung Yeon [Yonsei University, Seoul (Korea, Republic of)

    2005-07-01

    One day representative mixed diet of adult Korean was collected from the data based on the food diary of 77 healthy subjects at the age between 20 to 50. The analytical methods involving both instrumental and radiochemical neutron activation techniques are being developed for the determination of the elements Cs, I, Sr, Th and U in various kinds of biological samples. Concentrations of trace elements including 5 important elements such as U, Th, Cs, Sr and I in Korean total diet and 4 most frequently consuming Korean foodstuffs have been analyzed by neutron activation analysis.

  7. Some aspects of choice of specimen for biomedical trace element research studies in human subjects

    International Nuclear Information System (INIS)

    Iyengar, G.V.; Kollmer, W.E.

    1984-01-01

    An attempt is made to extend the examination of the biological background of human specimens in order to identify their suitability to reflect the desired elemental composition status meaningfully, and to view the analytical aspects to ensure reliability. A few examples, which have shown consistent results of practical value are presented. They include: blood, hair, urine, feces, and milk. The most meaningful analysis can be done in the organs which are damaged if an essential element is not present in a sufficient amount or a harmful element is present at a toxic level. e.g., liver and kidney. 20 references, 2 tables

  8. Studies in Korea on ingestion of trace elements of importance in radiological protection

    International Nuclear Information System (INIS)

    Cho, Seung Yeon

    2005-01-01

    One day representative mixed diet of adult Korean was collected from the data based on the food diary of 77 healthy subjects at the age between 20 to 50. The analytical methods involving both instrumental and radiochemical neutron activation techniques are being developed for the determination of the elements Cs, I, Sr, Th and U in various kinds of biological samples. Concentrations of trace elements including 5 important elements such as U, Th, Cs, Sr and I in Korean total diet and 4 most frequently consuming Korean foodstuffs have been analyzed by neutron activation analysis

  9. Micro-PIXE studies of elemental distribution in Cd-accumulating Brassica juncea L

    International Nuclear Information System (INIS)

    Schneider, Thorsten; Haag-Kerwer, Angela; Maetz, Mischa; Niecke, Manfred; Povh, Bogdan; Rausch, Thomas; Schuessler, Arthur

    1999-01-01

    Brassica juncea L. is a high biomass producing crop plant, being able to accumulate Cd and other heavy metals in their roots and shoots. It is a good candidate for efficient phytoextraction of heavy metals - such as Cd - from polluted soils. PIXE and STIM analyses were applied to investigate Cd-uptake in roots and the resulting effects on the elemental distribution of Cd stressed plants. The axial distribution of trace elements as a function of distance from the root tip as well as the radial distribution within cross-sections were analysed. The results are compared with the elemental distribution in control plants

  10. Micro-PIXE studies of elemental distribution in Cd-accumulating Brassica juncea L.

    Science.gov (United States)

    Schneider, Thorsten; Haag-Kerwer, Angela; Maetz, Mischa; Niecke, Manfred; Povh, Bogdan; Rausch, Thomas; Schüßler, Arthur

    1999-10-01

    Brassica juncea L. is a high biomass producing crop plant, being able to accumulate Cd and other heavy metals in their roots and shoots. It is a good candidate for efficient phytoextraction of heavy metals - such as Cd - from polluted soils. PIXE and STIM analyses were applied to investigate Cd-uptake in roots and the resulting effects on the elemental distribution of Cd stressed plants. The axial distribution of trace elements as a function of distance from the root tip as well as the radial distribution within cross-sections were analysed. The results are compared with the elemental distribution in control plants.

  11. Micro-PIXE studies of elemental distribution in Cd-accumulating Brassica juncea L

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Thorsten E-mail: thorsten.schneider@mpi-hd.mpg.de; Haag-Kerwer, Angela; Maetz, Mischa; Niecke, Manfred; Povh, Bogdan; Rausch, Thomas; Schuessler, Arthur

    1999-09-02

    Brassica juncea L. is a high biomass producing crop plant, being able to accumulate Cd and other heavy metals in their roots and shoots. It is a good candidate for efficient phytoextraction of heavy metals - such as Cd - from polluted soils. PIXE and STIM analyses were applied to investigate Cd-uptake in roots and the resulting effects on the elemental distribution of Cd stressed plants. The axial distribution of trace elements as a function of distance from the root tip as well as the radial distribution within cross-sections were analysed. The results are compared with the elemental distribution in control plants.

  12. Studies on elemental analysis of Chinese traditional herbs by neutron activation technique and their mutagenic effect

    International Nuclear Information System (INIS)

    Hamzah, A.; Beh, C.W.; Abugassa, I.; Sarmani, S.B.; Liow, J.Y.

    2004-01-01

    Chinese herbs are accepted as an alternative medicine for specific treatment of illness. It is important to know the contents of these herbs that might cause gene mutation. Ten most popular herbs used in Malaysia were analyzed by instrumental neutron activation analysis. A total of 16 trace and major elements were determined and the concentration of elements varied depending on the origin of the herb. Toxic elements found in the samples were below the levels prescribed by health regulations. The mutagenicity test showed that there was no toxic effect due to the heavy metals present in the herbs. (author)

  13. A study on removal of elemental mercury in flue gas using fenton solution

    International Nuclear Information System (INIS)

    Liu, Yangxian; Wang, Yan; Wang, Qian; Pan, Jianfeng; Zhang, Yongchun; Zhou, Jianfei; Zhang, Jun

    2015-01-01

    Highlights: • A novel technique on oxidation of Hg 0 using Fenton was proposed. • The effects of several process parameters on Hg 0 removal were studied. • Products and ·OH in solution were detected. • Reaction mechanism of Hg 0 removal was studied. • Simultaneous removal of Hg 0 , NO and SO 2 was also studied. - Abstract: A novel technique on oxidation-separation of elemental mercury (Hg 0 ) in flue gas using Fenton solution in a bubbling reactor was proposed. The effects of several process parameters (H 2 O 2 concentration, Hg 0 inlet concentration, Fe 2+ concentration, solution temperature, solution pH, gas flow) and several flue gas components (NO, SO 2 , O 2 , CO 2 , inorganic ions and particulate matters on Hg 0 removal were studied. The results indicate that H 2 O 2 concentration, Fe 2+ concentration, solution pH and gas flow have great effects on Hg 0 removal. Solution temperature, Hg 0 , NO, SO 2 , CO 3 2− and HCO 3 − concentrations also have significant effects on Hg 0 removal. However, Cl − , SO 4 2− , NO 3 − , O 2 and CO 2 concentrations only have slight effects on Hg 0 removal. Furthermore, reaction mechanism of Hg 0 removal and simultaneous removal process of Hg 0 , NO and SO 2 were also studied. Hg 0 is removed by oxidation of ·OH and oxidation of H 2 O 2 . The simultaneous removal efficiencies of 100% for SO 2 , 100% for Hg 0 and 88.3% for NO were obtained under optimal test conditions. The results demonstrated the feasibility of Hg 0 removal and simultaneous removal of Hg 0 , SO 2 and NO using Fenton solution in a bubbling reactor

  14. Study on the effect of the CANFLEX-NU fuel element bowing on the critical heat flux

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Ho Chun; Cho, Moon Sung; Jeon, Ji Su

    2001-01-01

    The effect of the CANFLEX-NU fuel element bowing on the critical heat flux is reviewed and analyzed, which is requested by KINS as the Government design licensing condition for the use of the fuel bundles in CANDU power reactors. The effect of the gap between two adjacent fuel elements on the critical heat flux and onset-of-dryout power is studied. The reduction of the width of a single inter-rod gap from its nominal size to the minimum manufacture allowance of 1 mm has a negligible effects on the thermal-hydraulic performance of the bundle for the given set of boundary conditions applied to the CANFLEX-43 element bundle in an uncrept channel. As expected, the in-reactor irradiation test results show that there are no evidence of the element bow problems on the bundle performance.

  15. Element availability of bivalve with symbiotic zooxanthellae in coral sea area as studied by multielement profiling analysis

    Science.gov (United States)

    Itoh, A.; Kabe, N.

    2008-12-01

    In coral sea, a characteristic ecosystem is formed by many kinds of marine animals and plants, although seawater is uneutrophic. This may be explained by the fact that various chemical species with bioessentiality are effectively taken and used by lower animals and plants in coral sea area. A symbiotic relationship often found among different animals and plants in this area is considered to be working as one of such processes. However, the specific bioavailability of the elements for the marine animals and plants in coral reef area has not been studied from the viewpoints of trace and ultratrace elements. It is found by the present authors that bivalve with symbiotic zooxanthellae (Tridacna crocea) living on coral reef had relatively higher bio- accumulation factors for many bio-essential elements than other kinds of bivalves, although they live in the uneutrophic sea area. The present authors focused on Tridacna crocea as one of the symbiotic animals. Thus, in the present study, at first, multielement determination of major-to-ultratrace elements (about 20 elements) in each organ of Tridacna crocea with symbiotic zooxanthellae, were carried out by ICP-AES, ICP- MS, and CHN coder. At Second, the specific bioavailability of trace and ultratrace elements in Tridacna crocea was discussed on the multielement data for seawater, seaweeds, and other bivalves in coral sea area.

  16. Adsorption of trace elements on a bentonite sample: experimental study and modelling; Retention d'elements trace sur une bentonite: etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Hurel, Ch

    2002-12-15

    Radioactive waste storage in deep underground is studied in France. The alteration of the radioactive waste can mobilize the elements that can migrate to the geosphere. Clays (bentonite) are investigated as major materials constituting the barriers because of their low permeability and high retention capacity. A thermodynamic surface complexation model, based on the component additivity principle was investigated, in order to predict the adsorption behaviour of pollutants in contact with clay. This principle allows an independent determination of each parameter of the model, limiting the fitting procedure of correlated data, and it allows the use of an adsorption thermodynamic database for a solid. The predictions obtained were in good accordance with experimental data. The model could then be applied successfully in performance assessment. (author)

  17. A study of unstable rock failures using finite difference and discrete element methods

    Science.gov (United States)

    Garvey, Ryan J.

    Case histories in mining have long described pillars or faces of rock failing violently with an accompanying rapid ejection of debris and broken material into the working areas of the mine. These unstable failures have resulted in large losses of life and collapses of entire mine panels. Modern mining operations take significant steps to reduce the likelihood of unstable failure, however eliminating their occurrence is difficult in practice. Researchers over several decades have supplemented studies of unstable failures through the application of various numerical methods. The direction of the current research is to extend these methods and to develop improved numerical tools with which to study unstable failures in underground mining layouts. An extensive study is first conducted on the expression of unstable failure in discrete element and finite difference methods. Simulated uniaxial compressive strength tests are run on brittle rock specimens. Stable or unstable loading conditions are applied onto the brittle specimens by a pair of elastic platens with ranging stiffnesses. Determinations of instability are established through stress and strain histories taken for the specimen and the system. Additional numerical tools are then developed for the finite difference method to analyze unstable failure in larger mine models. Instability identifiers are established for assessing the locations and relative magnitudes of unstable failure through measures of rapid dynamic motion. An energy balance is developed which calculates the excess energy released as a result of unstable equilibria in rock systems. These tools are validated through uniaxial and triaxial compressive strength tests and are extended to models of coal pillars and a simplified mining layout. The results of the finite difference simulations reveal that the instability identifiers and excess energy calculations provide a generalized methodology for assessing unstable failures within potentially complex

  18. Trace element intake and dietary status of nuts consumed in Pakistan: study using INAA

    International Nuclear Information System (INIS)

    Waheed, S.; Siddique, N.; Rahman, A.

    2007-01-01

    Five nuts, namely almond, cashew nuts, peanuts, pine nuts and pistachio, commonly consumed in Pakistan, were analyzed for their inorganic element contents. Instrumental neutron activation analysis (INAA) methodology, using different irradiation, cooling and counting protocols, was adopted to determine Al, Br, Ca, Cl, Co, Cs, Eu, Fe, Hg, K, La, Mg, Mn, Mo, Na, Rb, Sc, Se, Sr and Zn. The investigated nuts were found to contain substantial amounts of Ca, Cl, Fe, Mg, K, Na and Zn. Dietary intake of the essential inorganic elements present in these nuts, as compared to the recommended dietary allowance, has also been calculated. This has further substantiated the nutrient role of nuts in the prevention of cardiovascular disease, as in addition to their established efficacy in improving the lipid profile, they are a rich source of cardioprotective trace elements such as magnesium, zinc, iron and calcium. Toxic elements were present in very low concentrations in nuts. (orig.)

  19. Trace element intake and dietary status of nuts consumed in Pakistan: study using INAA

    Energy Technology Data Exchange (ETDEWEB)

    Waheed, S; Siddique, N; Rahman, A [Pakistan Inst. of Nuclear Science and Technology, Islamabad (Pakistan). Nuclear Chemistry Div.

    2007-07-01

    Five nuts, namely almond, cashew nuts, peanuts, pine nuts and pistachio, commonly consumed in Pakistan, were analyzed for their inorganic element contents. Instrumental neutron activation analysis (INAA) methodology, using different irradiation, cooling and counting protocols, was adopted to determine Al, Br, Ca, Cl, Co, Cs, Eu, Fe, Hg, K, La, Mg, Mn, Mo, Na, Rb, Sc, Se, Sr and Zn. The investigated nuts were found to contain substantial amounts of Ca, Cl, Fe, Mg, K, Na and Zn. Dietary intake of the essential inorganic elements present in these nuts, as compared to the recommended dietary allowance, has also been calculated. This has further substantiated the nutrient role of nuts in the prevention of cardiovascular disease, as in addition to their established efficacy in improving the lipid profile, they are a rich source of cardioprotective trace elements such as magnesium, zinc, iron and calcium. Toxic elements were present in very low concentrations in nuts. (orig.)

  20. [Study on the determination of 14 inorganic elements in coffee by inductively coupled plasma mass spectrometry].

    Science.gov (United States)

    Nie, Xi-Du; Fu, Liang

    2013-07-01

    Samples of coffee were digested by microwave digestion, and inorganic elements amounts of Na, Mg, P, Ca, Cr, Mn, Fe, Co, Cu, Zn, As, Se, Mo and Pb in sample solutions were determined by inductively coupled plasma mass spectrometry (ICP-MS). HNO3 + H2O2 was used to achieve the complete decomposition of the organic matrix in a closed-vessel microwave oven. The working parameters of the instrument were optimized. The results showed that the relative standard deviation (RSD) was less than 3.84% for all the elements, and the recovery was found to be 92.00% -106.52% by adding standard recovery experiment. This method was simple, sensitive and precise and can perform simultaneous multi-elements determination of coffee, which could satisfy the sample examination request and provide scientific rationale for determining inorganic elements of coffee.

  1. Study of distribution and differential accumulation of trace elements in plant leaves using neutron activation analysis

    International Nuclear Information System (INIS)

    Koyama, Mutsuo; Takada, Jitsuya; Shirakawa, Masahiro; Katayama, Koshi.

    1983-01-01

    Plant leaves were collected from geologically different forests three times from April to May, from August to September, and from October to November. Although the concentration of inorganic elements showed the constant distribution pattern in the same trees, the distribution pattern was peculiar to plant species and elements. Ia and halogen groups were prominent in herbaceous plants, while IIa group, except for Ba accumulated into pteridophyta, was prominent in woody plants. Of the transition metal elements, Mn was highly accumulated in Tea senensis. The high concentration of Mn was more marked in Araliaceae than in Tea senensis. Specific high concentrations of Fe and Co were noted in Ecephorbiaceae, Zn and Cd in Aquifoliaceae, and Al, rare earth elements and Ra in Gleichenia japonica and Dicranopteris dichotome. (Namekawa, K.)

  2. Chromatographic study of element 104 in the system HCl/triisobutylphosphate (TBP)

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, R.; Paulus, W.; Kratz, J.V.; Seibert, A.; Thoerle, P.; Zauner, S. [Mainz Univ. (Germany); Bruechle, W.; Jaeger, E.; Schaedel, M.; Schausten, B. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Schumann, D. [Technische Univ. Dresden (Germany); Eichler, B.; Jost, D.T.; Tuerler, A.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    With the Automated Rapid Chemistry Apparatus ARCA chromatic experiments have been performed using the chemical system hydrochloric acid/tributylphosphate with element 104 (Rf). The results indicate that Rf behaves more like its homolog Hf. (author) 2 figs., 5 refs.

  3. Accelerator based nuclear analytical methods for trace element studies in materials- calcified tissues

    International Nuclear Information System (INIS)

    Chaudhri, M. Anwar

    2006-01-01

    Full text: Various nuclear analytical methods have been developed and applied to determine the elemental composition of calcified tissues (teeth and bones). Fluorine was determined by prompt gamma activation analysis through the 19 F(p,αγ) 16 O reaction. Carbon was measured by activation analysis with He-3 ions, and the technique of Proton-Induced X-ray Emission (PIXE) was applied to simultaneously determine Ca, P, and trace elements in well-documented teeth. Dental hard tissues: enamel, dentine, cementum, and their junctions, as well as different parts of the same tissue, were examined separately. Furthermore, using a Proton Microprobe, we measured the surface distribution of F and other elements on and around carious lesions on the enamel. The depth profiles of F, and other elements, were also measured right up to the amelodentin junction. (author)

  4. A SIMS study of lunar 'komatiitic glasses' - Trace element characteristics and possible origin

    Science.gov (United States)

    Shearer, C. K.; Papike, J. J.; Galbreath, K. C.; Wentworth, S. J.; Shimizu, N.

    1990-01-01

    In Apollo 16 regolith breccias, Wentworth and McKay (1988) identified a suite of minute (less than 120 microns) 'komatiitic glass beads'. The wide major element compositional range, and ultra-Mg-prime character of the glasses suggest a variety of possible origins from complex impact processes to complex volcanic processes involving rather unusual and primitive magmatism. The extent of trace element depletion or enrichment in these glasses appears to be correlated to the siderophile character of the element (ionization potential or experimentally determined silicate melt/Fe metal partition coefficients. The ultra-Mg-prime glasses are depleted in Co relative to a bulk Moon Mg/Co exhibited by many lunar samples (volcanic glasses, basalts, regolith breccia, estimated upper mantle). The low Co and high incompatible element concentrations diminish the possibility that these glasses are a product of lunar komatiitic volcanism or impact, excavation, and melting of a very high Mg-prime plutonic unit.

  5. Toxic elements as biomarkers for breast cancer: a meta-analysis study

    Directory of Open Access Journals (Sweden)

    Jouybari L

    2018-01-01

    Full Text Available Leila Jouybari,1 Marzieh Saei Ghare Naz,2 Akram Sanagoo,1 Faezeh Kiani,3 Fatemeh Sayehmiri,4 Kourosh Sayehmiri,5 Ali Hasanpour Dehkordi6 1Nursing Research Center, Goletsan University of Medical Sciences, Gorgan, Iran; 2Student Research Committee, School of Nursing and Midwifery, Shahid Beheshti University of Medical Sciences, Tehran, Iran; 3Student Research Committee, Ilam University of Medical Sciences, Ilam, Iran; 4Proteomics Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran; 5Department of Social Medicine, School of Medicine, Ilam University of Medical Sciences, Ilam, Iran; 6Department of Medical Surgical, Nursing and Midwifery, Shahrekord University of Medical Sciences, Shahrekord, Iran Aims and background: Breast cancer (BC is responsible for a large proportion of incidence of cancer in the world. Identifying the risk factors contributing to the incidence of BC is crucial to find efficient preventive and management strategies for this disease. Several studies have examined Arsenic (As, Cadmium (Cd, and Nickel (Ni as risk factors for BC. The present study aimed at studying the link between As, Cd, and Ni concentrations and BC by using a meta-analysis.Materials and methods: All case–control studies addressing the relationship between As, Cd, and Ni concentrations with BC were identified through electronic search databases (­Scopus, ISI Web of Science, PubMed, EmBase, and Cochrane Library. The relevant data obtained from these papers were analyzed by a random-effects model. The heterogeneity of studies was secured by using I2 index. Funnel plots and Egger’s test were used to examine publication bias.Results: In the present study, due to different measurement methods used for measuring As, Cd, and Ni, the concentration of these elements was measured in various subgroups (1: plasma, 2: breast tissue, and 3: scalp hair and nail of individuals with BC and healthy subjects. The overall integration of data from the 3

  6. A study about trace element distribution in cancer tissue and serum of cancer patients

    International Nuclear Information System (INIS)

    Lee, Jong In; Lee, Eun Joo; Jung, Young Joo

    1993-01-01

    Authers analyzed the trace element distribution of cancer tissue and its corresponding normal tissue and serum of preoperative and postoperative stage in gastric, colon, breast cancer patients. Zinc and rubidium were higher in concentration in breast cancer tissue than in normal tissue. As for the distribution of trace element in serum, bromine became about 10 times higher after gastric resection. This result can be applied to experimental carcinogenesis and to relationship with other prognostic factors. (Author)

  7. A study of the imaging of atomic elements by computerised axial tomography

    OpenAIRE

    McCarthy, K. J

    1989-01-01

    Conventional computerized axial tomography images show the spatial variation in the linear attenuation coefficient in a cross-section of a specimen. However, no information is present to enable one to predict the location nor concentration of an atomic element in the image. Differential X-ray absorptiometry is a well established analytic technique for determining the concentration of an atomic element in a specimen. In this thesis, it is shown that by applying differential X-ray absorpt...

  8. Activation analysis study on subcellular distribution of trace elements in human brain tumor

    International Nuclear Information System (INIS)

    Zheng Jian; Zhuan Guisun; Wang Yongji; Dong Mo; Zhang Fulin

    1992-01-01

    The concentrations of up to 11 elements in subcellular fractions of human brain (normal and malignant tumor) have been determined by a combination of gradient centrifugation and INAA methods. Samples of human brain were homogenized in a glass homogenizer tube, the homogenate was separated into nuclei, mitochondrial, myelin, synaptosome fractions, and these fractions were then analyzed using the INAA method. The discussions of elemental subcelleular distributions in human brain malignant tumor are presented in this paper. (author) 11 refs.; 2 figs.; 4 tabs

  9. Some studies on light-element analysis with particle accelerators in South Africa

    International Nuclear Information System (INIS)

    Peisach, M.; Pillay, A.E.

    1993-01-01

    The analysis of elements in the range 1 ≤ Z ≤ is often difficult by most contemporary methods. The practical utility of various ion-beam techniques on light-element analysis is examined, and a comprehensive evaluation of the major analytical aspects on determinations of this nature, with particular reference to work done in South Africa, is provided. 40 refs., 8 figs., 3 tabs

  10. Strategic Alliance Development - A Process Model A Case Study Integrating Elements of Strategic Alliances

    OpenAIRE

    Mohd Yunos, Mohd Bulkiah

    2007-01-01

    There has been enormous increase in the formation of strategic alliance and the research efforts devoted to understanding alliance development process over the last few decades. However, the critical elements that influence the each stage of alliance development are yet unexplored. This dissertation aims to fill this gap and to supplement it by introducing an integrated process model of strategic alliance development and its critical elements. The process model for strategic alliance developm...

  11. Nuclear microprobe studies of elemental distribution in the seagrass Thalassodendron ciliatum

    Energy Technology Data Exchange (ETDEWEB)

    Barnabas, A.D. E-mail: alban@pixie.udw.ac.za; Przybylowicz, W.J.; Mesjasz-Przybylowicz, J.; Pineda, C.A

    1999-09-02

    Elemental levels and distributions in various organs (leaves, upright stems, rhizomes and roots) of the seagrass Thalassodendron ciliatum were determined using the NAC nuclear microprobe. Elemental distributions were obtained using the true elemental imaging system Dynamic Analysis (DA). Cl was the most abundant element present in the organs, occurring in all tissues, but present in relatively low concentrations in epidermal cells of leaves and roots. Na, K, S and Mg were also abundant and occurred in all organ tissues. Ca concentration was highest in the leaves, especially in the epidermis. Low concentrations of P were found and its tissue distribution was limited. Although Fe, Cu, Zn, Mn, Br, Ti and Si were present in relatively small amounts, enrichment of the epidermis with Fe, Ti and Si in all organs, was observed. Fe concentration was the highest in rhizomes while Si concentration was highest in upright stems. The significance of these elemental distribution patterns and the value of the nuclear microprobe in elemental analysis of seagrasses are discussed.

  12. Studies on cellular distribution of elements in human hepatocellular carcinoma samples by molecular activation analysis

    International Nuclear Information System (INIS)

    Deng Guilong; Chen Chunying; Zhang Peiqun; Zhao Jiujiang; Chai Zhifang

    2005-01-01

    The distribution patterns of 17 elements in the subcellular fractions of nuclei, mitochondria, lysosome, microsome and cytosol of human hepatocellular carcinoma (HCC) and normal liver samples were investigated by using molecular activation analysis (MAA) and differential centrifugation. Their significant difference was checked by the Studient's t-test. These elements exhibit inhomogeneous distributions in each subcellular fraction. Some elements have no significant difference between hepatocellular carcinoma and normal liver samples. However, the concentrations of Br, Ca, Cd and Cs are significantly higher in each component of hepatocarcinoma than in normal liver. The content of Fe in microsome of HCC is significantly lower, almost half of normal liver samples, but higher in other subcellular fractions than in those of normal tissues. The rare earth elements of La and Ce have the patterns similar to Fe. The concentrations of Sb and Zn in nuclei of HCC are obviously lower (P<0.05, P<0.05). The contents of K and Na are higher in cytosol of HCC (P<0.05). The distributions of Ba and Rb show no significant difference between two groups. The relationships of Fe, Cd and K with HCC were also discussed. The levels of some elements in subcellular fractions of tumor were quite different from those of normal liver, which suggested that trace elements might play important roles in the occurrence and development of hepatocellular carcinoma. (authors)

  13. Studies on cellular distribution of elements in human hepatocellular carcinoma samples by molecular activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Guilong, Deng [Chinese Academy of Sciences, Beijing (China). Inst. of High Energy Physics, Key Laboratory of Nuclear Analytical Techniques; Department of General Surgery, the Second Affiliated Hospital, School of Medicine, Zhejiang Univ., Hangzhou (China); Chunying, Chen; Peiqun, Zhang; Jiujiang, Zhao; Zhifang, Chai [Chinese Academy of Sciences, Beijing (China). Inst. of High Energy Physics, Key Laboratory of Nuclear Analytical Techniques; Yingbin, Liu; Jianwei, Wang; Bin, Xu; Shuyou, Peng [Department of General Surgery, the Second Affiliated Hospital, School of Medicine, Zhejiang Univ., Hangzhou (China)

    2005-07-15

    The distribution patterns of 17 elements in the subcellular fractions of nuclei, mitochondria, lysosome, microsome and cytosol of human hepatocellular carcinoma (HCC) and normal liver samples were investigated by using molecular activation analysis (MAA) and differential centrifugation. Their significant difference was checked by the Studient's t-test. These elements exhibit inhomogeneous distributions in each subcellular fraction. Some elements have no significant difference between hepatocellular carcinoma and normal liver samples. However, the concentrations of Br, Ca, Cd and Cs are significantly higher in each component of hepatocarcinoma than in normal liver. The content of Fe in microsome of HCC is significantly lower, almost half of normal liver samples, but higher in other subcellular fractions than in those of normal tissues. The rare earth elements of La and Ce have the patterns similar to Fe. The concentrations of Sb and Zn in nuclei of HCC are obviously lower (P<0.05, P<0.05). The contents of K and Na are higher in cytosol of HCC (P<0.05). The distributions of Ba and Rb show no significant difference between two groups. The relationships of Fe, Cd and K with HCC were also discussed. The levels of some elements in subcellular fractions of tumor were quite different from those of normal liver, which suggested that trace elements might play important roles in the occurrence and development of hepatocellular carcinoma. (authors)

  14. Study of gap conductance model for thermo mechanical fully coupled finite element model

    International Nuclear Information System (INIS)

    Kim, Hyo Cha; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun

    2012-01-01

    accurately, gap conductance model for thermomechanical fully coupled FE should be developed. However, gap conductance in FE can be difficult issue in terms of convergence because all elements which are positioned in gap have different gap conductance at each iteration step. It is clear that our code should have gap conductance model for thermo-mechanical fully coupled FE in three-dimension. In this paper, gap conductance model for thermomechanical coupled FE has been built using commercial FE code to understand gap conductance model in FE. We coded commercial FE code using APDL because it does not have iterative gap conductance model. Through model, convergence parameter and characteristics were studied

  15. Trends of atmospheric deposition of trace elements in Macedonia studied by the moss biomonitoring technique.

    Science.gov (United States)

    Barandovski, Lambe; Frontasyeva, Marina V; Stafilov, Trajče; Sajn, Robert; Pavlov, Sergey; Enimiteva, Vangelica

    2012-01-01

    In 2002 and 2005 the moss biomonitoring technique was applied to air pollution studies in the Republic of Macedonia in the framework of the International Cooperative Programme on Effects of Air Pollution on Natural Vegetation and Crops under the auspices of the United Nations Economic Commission for Europe (UNECE-ICP Vegetation) Convention on Long-Range Transboundary Air Pollution (LRTAP). In August 2005 samples of the terrestrial mosses Homolothecium lutescens and Hypnum cupressiforme were collected at 72 sites evenly distributed over the territory of the country, in accordance with the sampling strategy of the European moss survey programme. A total of 41 elements (Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Zr, Mo, Cd, Sb, I, Cs, Ba, La, Ce, Sm, Eu, Tb, Dy Hf, Ta, W, Hg, Pb, Th, and U) were determined by instrumental epithermal neutron activation analysis and atomic absorption spectrometry. Principal component analysis was used to identify and characterize different pollution sources. Distributional maps were prepared to point out the regions most affected by pollution and to relate this to known sources of contamination. A few areas, as in 2002, are experiencing particular environmental stress: Veles, Skopje, Tetovo, Radoviš and Kavadarci-Negotino, whereas the agricultural regions in the south, south-west, and south-east show median European values for most elements of mainly pollution origin. A significant increase in the content of Ni is noticed in the 2005 moss survey compared with 2002, due to the increased production of the ferro-nickel smelter in Kavadarci. A higher content of Cd, Hg, and Pb in 2005 relative to 2002 can be explained by pollution from the lead-zinc smelter in Veles, as well as the pollution that comes from the open slag waste dump of this smelter. Protection activities on the dump of slag from the former ferrochromium smelter located near Tetovo resulted in a lower content of Cr in the 2005 moss

  16. A resolution study for electrostatic force microscopy on bimetallic samples using the boundary element method

    International Nuclear Information System (INIS)

    Shen Yongxing; Lee, Minhwan; Lee, Wonyoung; Barnett, David M; Pinsky, Peter M; Prinz, Friedrich B

    2008-01-01

    Electrostatic force microscopy (EFM) is a special design of non-contact atomic force microscopy used for detecting electrostatic interactions between the probe tip and the sample. Its resolution is limited by the finite probe size and the long-range characteristics of electrostatic forces. Therefore, quantitative analysis is crucial to understanding the relationship between the actual local surface potential distribution and the quantities obtained from EFM measurements. To study EFM measurements on bimetallic samples with surface potential inhomogeneities as a special case, we have simulated such measurements using the boundary element method and calculated the force component and force gradient component that would be measured by amplitude modulation (AM) EFM and frequency modulation (FM) EFM, respectively. Such analyses have been performed for inhomogeneities of various shapes and sizes, for different tip-sample separations and tip geometries, for different applied voltages, and for different media (e.g., vacuum or water) in which the experiment is performed. For a sample with a surface potential discontinuity, the FM-EFM resolution expression agrees with the literature; however, the simulation for AM-EFM suggests the existence of an optimal tip radius of curvature in terms of resolution. On the other hand, for samples with strip- and disk-shaped surface potential inhomogeneities, we have obtained quantitative expressions for the detectability size requirements as a function of experimental conditions for both AM- and FM-EFMs, which suggest that a larger tip radius of curvature is moderately favored for detecting the presence of such inhomogeneities

  17. Finite element modelling of FRC beams containing PVA and Basalt fibres: A comparative study

    Science.gov (United States)

    Ayub, Tehmina; Khan, Sadaqat Ullah

    2017-09-01

    The endeavour of current study is to compare the flexural behaviour and three dimensional (3D) finite element analysis (FEA) and the results of FEM are compared with the experimental results of 07 HPFRC beams. Out of seven (07), 01 beam of plain concrete without fibres was cast as a control beam. Three (03) beams containing 1, 2 and 3% volume of PVA fibres were prepared by using HPFRC mixes while, the remaining other three (03) beams were prepared using HPFRC mixes containing 1, 2 and 3% volume of Basalt fibres. In order to ensure flexural failure, three-point bending load was applied at the mid span of all beams. The maximum flexural load and corresponding deflection and strains at the mid span attained prior to the failure were obtained as flexural test results. The FEM results were obtained by simulating all beams in ATENA 3D program and verified through flexural test results. Both of the results of FEM and Experiment showed good agreement with each other.

  18. A study of selenium nanoparticles as charge storage element for flexible semi-transparent memory devices

    Science.gov (United States)

    Alotaibi, Sattam; Nama Manjunatha, Krishna; Paul, Shashi

    2017-12-01

    Flexible Semi-Transparent electronic memory would be useful in coming years for integrated flexible transparent electronic devices. However, attaining such flexibility and semi-transparency leads to the boundaries in material composition. Thus, impeding processing speed and device performance. In this work, we present the use of inorganic stable selenium nanoparticles (Se-NPs) as a storage element and hydrogenated amorphous carbon (a-C:H) as an insulating layer in two terminal non-volatile physically flexible and semi-transparent capacitive memory devices (2T-NMDs). Furthermore, a-C:H films can be deposited at very low temperature (industrial technique called Plasma Enhanced Chemical Vapour Deposition (PECVD) which is available in many existing fabrication labs. Self-assembled Se-NPs has several unique features including deposition at room temperature by simple vacuum thermal evaporation process without the need for further optimisation. This facilitates the fabrication of memory on a flexible substrate. Moreover, the memory behaviour of the Se-NPs was found to be more distinct than those of the semiconductor and metal nanostructures due to higher work function compared to the commonly used semiconductor and metal species. The memory behaviour was observed from the hysteresis of current-voltage (I-V) measurements while the two distinguishable electrical conductivity states (;0; and "1") were studied by current-time (I-t) measurements.

  19. Study on small-strain behaviours of methane hydrate sandy sediments using discrete element method

    Energy Technology Data Exchange (ETDEWEB)

    Yu Yanxin; Cheng Yipik [Department of Civil, Environmental and Geomatic Engineering, University College London (UCL), Gower Street, London, WC1E 6BT (United Kingdom); Xu Xiaomin; Soga, Kenichi [Geotechnical and Environmental Research Group, Department of Engineering, University of Cambridge, Trumpington Street, Cambridge, CB2 1PZ (United Kingdom)

    2013-06-18

    Methane hydrate bearing soil has attracted increasing interest as a potential energy resource where methane gas can be extracted from dissociating hydrate-bearing sediments. Seismic testing techniques have been applied extensively and in various ways, to detect the presence of hydrates, due to the fact that hydrates increase the stiffness of hydrate-bearing sediments. With the recognition of the limitations of laboratory and field tests, wave propagation modelling using Discrete Element Method (DEM) was conducted in this study in order to provide some particle-scale insights on the hydrate-bearing sandy sediment models with pore-filling and cementation hydrate distributions. The relationship between shear wave velocity and hydrate saturation was established by both DEM simulations and analytical solutions. Obvious differences were observed in the dependence of wave velocity on hydrate saturation for these two cases. From the shear wave velocity measurement and particle-scale analysis, it was found that the small-strain mechanical properties of hydrate-bearing sandy sediments are governed by both the hydrate distribution patterns and hydrate saturation.

  20. A study of flow patterns for staggered cylinders at low Reynolds number by spectral element method

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Li-Chieh; Chen, Chien-Lin; Ye, Jian-Zhi [National Yunlin University of Science and Technology, Taiwan (China)

    2017-06-15

    This study investigates the pattern of flow past two staggered array cylinders using the spectral element method by varying the distance between the cylinders and the angle of incidence (α) at low Reynolds numbers (Re = 100-800). Six flow patterns are identified as Shear layer reattachment (SLR), Induced separation (IS), Vortex impingement (VI), Synchronized vortex shedding (SVS), Vortex pairing and enveloping (VPE), and Vortex pairing splitting and enveloping (VPSE). These flow patterns can be transformed from one to another by changing the distance between the cylinders, the angle of incidence, or Re. SLR, IS and VI flow patterns appear in regimes with small angles of incidence (i.e., α ≤ 30° ) and hold only a single von Karman vortex shedding in a wake with one shedding frequency. SVS, VPE and VPSE flow patterns appear in regimes with large angles of incidence (i.e., 30° ≤ α ≤ 50° ) and present two synchronized von Karman vortices. Quantitative analyses and physical interpretation are also conducted to determine the generation mechanisms of the said flow patterns.

  1. Studies on production planning of IPEN fuel-element plant in order to meet RMB demand

    Energy Technology Data Exchange (ETDEWEB)

    Negro, Miguel L.M.; Saliba-Silva, Adonis M.; Durazzo, Michelangelo, E-mail: mlnegro@ipen.br, E-mail: saliba@ipen.br, E-mail: mdurazzo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The plant of the Nuclear Fuel Center (CCN) will have to change its current laboratorial production level to an industrial level in order to meet the fuel demand of RMB and of IEA-R1. CCN's production process is based on the hydrolysis of UF6, which is not a frequent production route for nuclear fuel. The optimization of the production capacity of such a production route is a new field of studies. Two different approaches from the area of Operations Research (OR) were used in this paper. The first one was the PERT/CPM technique and the second one was the creation of a mathematical linear model for minimization of the production time. PERT/CPM's results reflect the current situation and disclose which production activities may not be critical. The results of the second approach show a new average time of 3.57 days to produce one Fuel Element and set the need of inventory. The mathematical model is dynamic, so that it issues better results if performed monthly. CCN's management team will therefore have a clearer view of the process times and production and inventory levels. That may help to shape the decisions that need to be taken for the enlargement of the plant's production capacity. (author)

  2. Relative contributions of plantar fascia and ligaments on the arch static stability: a finite element study.

    Science.gov (United States)

    Tao, Kai; Ji, Wen-Ting; Wang, Dong-Mei; Wang, Cheng-Tao; Wang, Xu

    2010-10-01

    The plantar fascia (PF) and major ligaments play important roles in keeping the static foot arch structure. Their functions and relative contributions to the arch stability have not been well studied. A three-dimensional finite element foot model was created based on the reconstruction of magnetic resonance images. During balanced standing, four cases after individual releases of the PF, spring ligament (SL), and long and short plantar ligaments (LPL and SPL) were simulated, to compare their biomechanical consequences with the normal predictions under the intact structure. Although the predictions showed the arch did not collapse obviously after each structure sectioning, the internal mechanical behaviors changed considerably. The PF release resulted in the maximal increases of approximately 91%, 65% and 47% in the tensions of the LPF, SPL and SL, produced the largest changes in all bone rotations, and brought an obvious shift of high stress from the medial metatarsals to the lateral metatarsals. The SL release mainly enhanced bone rotation angles and weakened the joint stability of the arch structure. The LPL and the SPL performed the roles of mutual compensation as either one was released. The influence of the LPL on the load distribution among metatarsals was greater than for the SPL and the SL.

  3. Prediction on fracture risk of femur with Osteogenesis Imperfecta using finite element models: Preliminary study

    Science.gov (United States)

    Wanna, S. B. C.; Basaruddin, K. S.; Mat Som, M. H.; Mohamad Hashim, M. S.; Daud, R.; Majid, M. S. Abdul; Sulaiman, A. R.

    2017-10-01

    Osteogenesis imperfecta (OI) is a genetic disease which affecting the bone geometry. In a severe case, this disease can cause death to patients. The main issue of this disease is the prediction on bone fracture by the orthopaedic surgeons. The resistance of the bone to withstand the force before the bones fracture often become the main concern. Therefore, the objective of the present preliminary study was to investigate the fracture risk associated with OI bone, particularly in femur, when subjected to the self-weight. Finite element (FEA) was employed to reconstruct the OI bone model and analyse the mechanical stress response of femur before it fractures. Ten deformed models with different severity of OI bones were developed and the force that represents patient self-weight was applied to the reconstructed models in static analysis. Stress and fracture risk were observed and analysed throughout the simulation. None of the deformed model were observed experienced fracture. The fracture risk increased with increased severity of the deformed bone. The results showed that all deformed femur models were able to bear the force without experienced fracture when subjected to only the self-weight.

  4. Feasibility Study of Parallel Finite Element Analysis on Cluster-of-Clusters

    Science.gov (United States)

    Muraoka, Masae; Okuda, Hiroshi

    With the rapid growth of WAN infrastructure and development of Grid middleware, it's become a realistic and attractive methodology to connect cluster machines on wide-area network for the execution of computation-demanding applications. Many existing parallel finite element (FE) applications have been, however, designed and developed with a single computing resource in mind, since such applications require frequent synchronization and communication among processes. There have been few FE applications that can exploit the distributed environment so far. In this study, we explore the feasibility of FE applications on the cluster-of-clusters. First, we classify FE applications into two types, tightly coupled applications (TCA) and loosely coupled applications (LCA) based on their communication pattern. A prototype of each application is implemented on the cluster-of-clusters. We perform numerical experiments executing TCA and LCA on both the cluster-of-clusters and a single cluster. Thorough these experiments, by comparing the performances and communication cost in each case, we evaluate the feasibility of FEA on the cluster-of-clusters.

  5. Beam Studies of the Segmented Resistive WELL: a Potential Thin Sampling Element for Digital Hadron Calorimetry

    CERN Document Server

    Arazi, Lior; Breskin, Amos; Bressler, Shikma; Moleri, Luca; Natal da Luz, Hugo; Oliveri, Eraldo; Pitt, Michael; Rubin, Adam; Marques Ferreira dos Santos, Joaquim; Calapez Albuquerque Veloso, João Filipe; White, Andrew Paul

    2013-01-01

    Thick Gas Electron Multipliers (THGEMs) have the potential of constituting thin, robust sampling elements in Digital Hadron Calorimetry (DHCAL) in future colliders. We report on recent beam studies of new single- and double-THGEM-like structures; the multiplier is a Segmented Resistive WELL (SRWELL) - a single-faced THGEM in contact with a segmented resistive layer inductively coupled to readout pads. Several 10$\\times$10 cm$^2$ configurations with a total thickness of 5-6 mm (excluding electronics) with 1 cm$^2$ pads coupled to APV-SRS readout were investigated with muons and pions. Detection efficiencies in the 98$%$ range were recorded with average pad-multiplicity of $\\sim$1.1. The resistive anode resulted in efficient discharge damping, with potential drops of a few volts; discharge probabilities were $\\sim10^{-7}$ for muons and $\\sim10^{-6}$ for pions in the double-stage configuration, at rates of a few kHz/cm$^2$. Further optimization work and research on larger detectors are underway.

  6. A Study on the Mechanical Properties of the Representative Volume Element in Fractal Porous Media

    Directory of Open Access Journals (Sweden)

    Jianjun Liu

    2017-01-01

    Full Text Available Natural porous structure is extremely complex, and it is of great significance to study the macroscopic mechanical response of the representative volume element (RVE with the microstructure of porous media. The real porous media RVE is generated by an improved quartet structure generation set (QSGS, and the connectivity of the reconstructed porous media models is analyzed. The fractal dimension of the RVE is calculated by the box-counting method, which considers the different porosity, different fractal dimension, and different mechanical properties of the matrix. Thus, the stress-strain curves of the RVE in the elastoplastic stage under different conditions are obtained. The results show that when the matrix mechanics are consistent, the mechanical properties of the porous media RVE are negatively correlated with the porosity and fractal dimension; when the difference between the porosity and fractal dimension increases, the trend is more obvious. The mechanical properties of the RVE have a positive correlation with the modulus of elasticity of the matrix, though the correlation with Poisson’s ratio of the matrix is weak. The fractal dimension of complex porous media can better predict the RVE mechanical characteristics than the porosity.

  7. Optimization of spinal implant screw for lower vertebra through finite element studies.

    Science.gov (United States)

    Biswas, Jayanta; Karmakar, Santanu; Majumder, Santanu; Banerjee, Partha Sarathi; Saha, Subrata; Roychowdhury, Amit

    2014-01-01

    The increasing older population is suffering from an increase in age-related spinal degeneration that causes tremendous pain. Spine injury is mostly indicated at the lumbar spine (L3-L5) and corresponding intervertebral disks. Finite element analysis (FEA) is now one of the most efficient and accepted tools used to simulate these pathological conditions in computer-assisted design (CAD) models. In this study, L3-L5 spines were modeled, and FEA was performed to formulate optimal remedial measures. Three different loads (420, 490.5, and 588.6 N) based on three body weights (70, 90, and 120 kg) were applied at the top surface of the L3 vertebra, while the lower surface of the L5 vertebra remained fixed. Models of implants using stainless steel and titanium alloy (Ti6Al4V) pedicle screws and rods with three different diameters (4, 5, and 6 mm) were inserted into the spine models. The relative strengths of bone (very weak, weak, standard, strong, and very strong) were considered to determine the patient-specific effect. A total of 90 models were simulated, and von Mises stress and strain, shear stress, and strain intensity contour at the bone-implant interface were analyzed. Results of these analyses indicate that the 6-mm pedicle screw diameter is optimal for most cases. Experimental and clinical validation are needed to confirm these theoretical results.

  8. [Study on the Identification of Geographical Indication Wuchang Rice Based on the Content of Inorganic Elements].

    Science.gov (United States)

    Li, Yong-le; Zheng, Yan-jie; Tang, Lu; Su, Zhi-yi; Xiong, Cen

    2016-03-01

    Wuchang rice is a geographical indication product in China. Due to its high quality and low production, the phenome- non of fake is more and more serious. An effective identification method of Wuchang rice is urgent needed, for the maintenance of its brand image and interest of consumers. Base on the content of inorganic elements which are analyzed by ICP-AES and ICP-MS in rice, the identification model of Wuchang rice is studied combining with principal component analysis (PCA), Fisher discrimination and artificial neural network (ANN) in this paper. The effect on the identification of samples is poor through PCA, while the samples from Wuchang area and other areas can be identified accurately through Fisher discrimination and ANN. The average accurate identification ratio of training and verification set through Fisher discrimination is 93.5%, while the average accurate identification ratio through ANN is 96.4%. The ability to identify of ANN is better than Fisher discrimination. Wuchang rice can be identified accurately through the result of this research which provides a technology for the protection of geographical indications of this product.

  9. Preliminary study of elemental analysis of hydroxyapatite used neutron activation analysis method

    International Nuclear Information System (INIS)

    Yustinus Purwamargapratala; Rina Mulyaningsih

    2010-01-01

    Preliminary study has been carried out elemental analysis of hydroxyapatite synthesized using the method of neutron activation analysis. Hydroxyapatite is the main component constituent of bones and teeth which can be synthesized from limestone and phosphoric acid. Hydroxyapatite can be used as a bone substitute material and human and animal teeth. Tests on the metal content is necessary to prevent the risk of damage to bones and teeth due to contamination. Results of analysis using neutron activation analysis method with samples irradiated at the neutron flux 10"3 n.det"-"1cm"-"2 for one minute, the impurities of Al (48.60±6.47 mg/kg), CI (38.00±7.47 mg/kg), Mn (1.05±0.19 mg/kg), and Mg (2095.30±203.66 mg/kg), were detected, whereas with irradiation time for 10 minutes and 40 minutes with a time decay of three days there were K (103.89 ± 26.82 mg/kg), Br (1617.06 ± 193.66 mg/kg), and Na (125.10±9.57 mg/kg). These results indicate that there is impurity Al, CI, Mn, Mg, Br, K and Na, although in very small amounts and do not cause damage to bones and teeth. (author)

  10. Simulation studies of acceleration of heavy ions and their elemental compositions

    International Nuclear Information System (INIS)

    Toida, Mieko; Ohsawa, Yukiharu

    1996-07-01

    By using a one-dimensional, electromagnetic particle simulation code with full ion and electron dynamics, we have studied the acceleration of heavy ions by a nonlinear magnetosonic wave in a multi-ion-species plasma. First, we describe the mechanism of heavy ion acceleration by magnetosonic waves. We then investigate this by particle simulations. The simulation plasma contains four ion species: H, He, O, and Fe. The number density of He is taken to be 10% of that of H, and those of O and Fe are much lower. Simulations confirm that, as in a single-ion-species plasma, some of the hydrogens can be accelerated by the longitudinal electric field formed in the wave. Furthermore, they show that magnetosonic waves can accelerate all the particles of all the heavy species (He, O, and Fe) by a different mechanism, i.e., by the transverse electric field. The maximum speeds of the heavy species are about the same, of the order of the wave propagation speed. These are in good agreement with theoretical prediction. These results indicate that, if high-energy ions are produced in the solar corona through these mechanisms, the elemental compositions of these heavy ions can be similar to that of the background plasma, i.e., the corona

  11. Studies on production planning of IPEN fuel-element plant in order to meet RMB demand

    International Nuclear Information System (INIS)

    Negro, Miguel L.M.; Saliba-Silva, Adonis M.; Durazzo, Michelangelo

    2015-01-01

    The plant of the Nuclear Fuel Center (CCN) will have to change its current laboratorial production level to an industrial level in order to meet the fuel demand of RMB and of IEA-R1. CCN's production process is based on the hydrolysis of UF6, which is not a frequent production route for nuclear fuel. The optimization of the production capacity of such a production route is a new field of studies. Two different approaches from the area of Operations Research (OR) were used in this paper. The first one was the PERT/CPM technique and the second one was the creation of a mathematical linear model for minimization of the production time. PERT/CPM's results reflect the current situation and disclose which production activities may not be critical. The results of the second approach show a new average time of 3.57 days to produce one Fuel Element and set the need of inventory. The mathematical model is dynamic, so that it issues better results if performed monthly. CCN's management team will therefore have a clearer view of the process times and production and inventory levels. That may help to shape the decisions that need to be taken for the enlargement of the plant's production capacity. (author)

  12. Soil versus lichen analysis on elemental dispersion studies (north of Portugal)

    International Nuclear Information System (INIS)

    Prudencio, M.I.; Gouveia, M.A.; Freitas, M.C.; Chaves, L.; Marques, A.P.

    2000-01-01

    Chemical elements contents in topsoil and lichens sampled at regular intervals in the north of Portugal were obtained by using both comparative and k 0 methods of instrumental neutron activation analysis. The topsoil chemical composition was studied in an attempt to discriminate between natural background and anthropogenic inputs, as well as to eliminate the influence of soil on the lichen composition. Topsoil maps revealed the existence of areas with anomalous concentrations due: (1) to natural causes (inherited from the initial rock) especially Cr in Tras-os-Montes and (2) anthropogenic influence, namely Aveiro-Estarreja area for Cr and Co associated to high values of Fe. Br contents in topsoil decrease from the coast to the interior explained by the sea influence (wet deposition). Exceptional concentration values of As, Zn, and W were found in one particular topsoil (Nogueira do Cravo), probably due to aerial inputs originated in mining activities. The enrichment factors (E.F.) in Parmelia sulcata relative to topsoil clearly showed that lichens are fingerprints of atmospheric pollution, especially for Cr, Zn, As, Br, Sb, and W. The following areas with anomalous E.F. in lichens were detected: (1) Viana do Castelo - Braga for Cr, Sb, (Zn and Br), (2) Tras-os-Montes for Br, (3) Porto for As and Zn, and (4) Aveiro-Estarreja for As, Cr, Sb, and W. Identification of industrial pollution sources was possible. (author)

  13. Effects of occlusal inclination and loading on mandibular bone remodeling: a finite element study.

    Science.gov (United States)

    Rungsiyakull, Chaiy; Rungsiyakull, Pimdeun; Li, Qing; Li, Wei; Swain, Michael

    2011-01-01

    To provide a preliminary understanding of the biomechanics with respect to the effect of cusp inclination and occlusal loading on the mandibular bone remodeling. Three different cusp inclinations (0, 10, and 30 degrees) of a ceramic crown and different occlusal loading locations (central fossa and 1- and 2-mm offsets horizontally) were taken into account to explore the stresses and strains transferred from the crown to the surrounding dental bone through the implant. A strain energy density obtained from two-dimensional plane-strain finite element analysis was used as the mechanical stimulus to drive cancellous and cortical bone remodeling in a buccolingual mandibular section. Different ceramic cusp inclinations had a significant effect on bone remodeling responses in terms of the change in the average peri-implant bone density and overall stability. The remodeling rate was relatively high in the first few months of loading and gradually decreased until reaching its equilibrium. A larger cusp inclination and horizontal offset (eg, 30 degrees and 2-mm offset) led to a higher bone remodeling rate and greater interfacial stress. The dental implant superstructure design (in terms of cusp inclination and loading location) determines the load transmission pattern and thus largely affects bone remodeling activities. Although the design with a lower cusp inclination recommended in previous studies may reduce damage and fracture failure, it could, to a certain extent, compromise bone engagement and long-term stability.

  14. Study of the feasibility of friction STIR welding applied to the fabrication of monolithic fuel elements

    International Nuclear Information System (INIS)

    Cabot, Pedro J.; Moglioni, A.; Mirandou, Marcela; Balart, Silvia N.

    2004-01-01

    The monolithic U-Mo fuel elements consist in a foil of a U-Mo alloy encased in Al. One of the techniques that is being tried to apply in their fabrication is Friction Stir Welding in the 'no contact at the interface' mode. The Laboratory of Welding at the National Atomic Energy Commission (Argentina) has a great experience in the conventional form of this technique so has started working on this new application. This paper describes the experiments performed to obtain the operative parameters. In the first experiments AA6061 T6 (Al) plates and sheets of AISI 316 (SS) were used to obtain the optimal operative parameters of the process. Welds were performed and evaluated for different operative variables such speed, angle and diameter of the tool and tool-interface gap keeping the rotation speed constant. Tensile test, pressure leak-proof test, bending test, non-destructive test and metallography were used to characterize the welds. Finally, SS and U-Mo foils were encased using the parameters selected from the first experiments. The samples prepared with U-Mo alloy will be used as diffusion couples and for the studies of interdiffusion under irradiation. (author)

  15. Study of grid independence of finite element method on MHD free convective casson fluid flow with slip effect

    Science.gov (United States)

    Raju, R. Srinivasa; Ramesh, K.

    2018-05-01

    The purpose of this work is to study the grid independence of finite element method on MHD Casson fluid flow past a vertically inclined plate filled in a porous medium in presence of chemical reaction, heat absorption, an external magnetic field and slip effect has been investigated. For this study of grid independence, a mathematical model is developed and analyzed by using appropriate mathematical technique, called finite element method. Grid study discussed with the help of numerical values of velocity, temperature and concentration profiles in tabular form. avourable comparisons with previously published work on various special cases of the problem are obtained.

  16. A study of elemental migration from poly(ethylene terephthalate) of food packagings to simulated solutions by radiometric method

    International Nuclear Information System (INIS)

    Soares, Eufemia Paez; Saki, Mitiko; Silva, Leonardo G.A.

    2007-01-01

    Brazilian plastic production for food packagings, in recent years, has grown in the same proportion as food consumption. Considering that the plastic manufacturing involves catalytic processes and the use of additives, when the foods are in direct contact with these materials, the components present in plastics may migrate to the food. The Brazilian Health Surveillance Agency (ANVISA) has established boundary-values of migrants as well as procedures to evaluate migration of elements and substances from plastic packaging to food. In this study elemental composition of poly (ethylene terephthalate) - PET - packaging and results of elemental migration were obtained. Instrumental Neutron Activation Analysis (INAA) was used to determine elemental concentrations in PET packagings and the radiometric method was applied for elemental migration determination. This radiometric method consisted of irradiating the PET samples with neutrons, followed by migration exposition and radioactivity measurement in food-simulated solution. Experimental conditions used for migration were 10 days exposure period at 40 deg C. Migration was evaluated for soft drink, juice and water PET packaging. The analytical results indicated that PET packagings contain Co and Sb and those elements are transferred to the simulated solutions. However, these migration results were lower than the maximum tolerance values established by ANVISA. The migration detection limits also indicated high sensitivity of the radiometric method. (author)

  17. New elements

    International Nuclear Information System (INIS)

    Flerov, G.

    1976-01-01

    The history is briefly described of the investigation of superheavy elements at the Joint Institute for Nuclear Research at Dubna. The significance of the investigation is assessed from the point of view of the nuclear structure study and major problems encountered in experimental efforts are indicated. Current experimental methods aiming at the discovery or the production of superheavy nuclei with Z approximately 114 are listed. (I.W.)

  18. Study of cis- and trans-uranium elements by paper chromatography and electrophoresis

    International Nuclear Information System (INIS)

    Clanet, F.

    1968-01-01

    In this work, the field of application of paper chromatography and electrophoresis in inorganic chemistry has been extended to elements 90 to 96 in hydrochloric and nitric acid solution. Results obtained concern the following points: 1) - Characterization of the valency states of Np and of Pu using coloured reactions on chromatograms and electrophoregrams. The valency IV is characterized by alizarin, arsenazo-I and thorin-I, whilst diphenylcarbazide is used for the hexavalent state. 2) - Paper chromatography: by using as eluent, mixtures of equal parts of aqueous HCl and HNO 3 solutions and of alcohols (methanol, ethanol and n-butanol), the R f values of elements 90 to 96 have been determined. It has been possible to deduce certain conclusions concerning the complexing of these elements by Cl - and NO 3 - ions. 3) - We have developed an electrophoretic technique on cellulose acetate membranes in order to separate the charged species formed by the elements 90 to 96 in HCl and HNO 3 solutions from 1 to 12 M. Mobility curves have been obtained. It appears from our results that the tendency for the elements considered to form anionic complexes follows the order of the ionic potentials when the valency state is four; this order is reversed for the valency three. The ions Cl - have a smaller tendency to form complexes than the NO 3 - ions with respect to these elements in their oxidation state III or IV, but the reverse phenomenon is observed for U VI and Pu VI . Finally, the complexing of the cations Pu 4+ and PuUO 2 2+ by NO 3 - follows the order of the ionic potentials but occurs in the reverse order for Cl - ions. 4) - Various analytical applications are considered: separation of the various elements from each other and separation of the valency states of Np and of Pu. (author) [fr

  19. Geochemical Study on an Abandoned Copper Smelting Plant Using Rare Earth Elements

    Science.gov (United States)

    Sun, S. H.

    2017-12-01

    The Shuei Nan Dong Copper Smelting Plant smelting is located on the northern coast of New Taipei City, Taiwan. The plant built in 1906 for but has been shut down since 1987. However, the watershed is continuing to discharge acid mine water into the sea; and, the acid mine drainage releases high amounts of sulfate, heavy metals without any treatment. In this study, the water samples were sequentially collected along the main channel and its tributaries in the watershed. The results of hydrochemical analysis show that the untreated inflow water can be characterized with low pH value of 80% of the total variance and almost all chemical components have high loadings in the PC. Therefore, the hydrochemical properties in the watershed are mainly dominated by the mixing process between main channel and the major tributary but the geochemical reactions during flow down the channel is insignificant. Rare earth elements (REE) are an excellent tracer, which can indicate sources of chemical components and geochemical reactions in water. The analysis results demonstrate two distinct REE patterns. The water with low REE can be characterized by prominent Eu positive anomaly and Ce negative anomaly, which may result from the alteration of Na-plagioclase in sandstone and oxidation reaction when contact with air, respectively. On the contrary, the water with high REE shows only minor Ce negative anomaly and insignificant Eu positive anomaly. In addition, there is an enrichment of middle REE in high-REE water, which is quite different with the REE pattern of pyrite. According to the Grawunder's study (2014), it corresponds to the complexation to sulphite during pyrite oxidation. It is worth noting that REE show no considerable fractionation along the channel and confirms the results from PCA. It can be derived that the water may not reached equilibrium condition. A simple aerated retention pool could dramatically reduce the pollutants due to coprecipitation of iron oxide and aluminum

  20. Proton induced X-Ray fluorescence study as a tool trace element analysis

    International Nuclear Information System (INIS)

    El-Kady, Ahmed A.

    1978-01-01

    Usefulness and limitations of trace elemental analysis by high energy charged particles and photon induced X-ray have been discussed. Comparison with the well established neutron activation analysis technique is also given. Back-ground radiation due to bremsstrahlung from secondary electrons and due to charged particle bremsstrahlung have been reviewed for different projectiles. The sensitivity of elemental analysis by proton induced X-ray fluorescence have been examined by measuring the characteristic X-ray emission cross section for K and L transitions of many elements and for different proton energies and compared with theroretical values. The discussion given in this report show that with suitable proton generator and a high resolution X-ray detector, proton X-ray fluorescence technique is capable of analyzing many elements simultaneously at the part per million level and offers a rapid and reliable method for trace element analysis. Data on water, blood and tissue samples given in this report are few examples of many possible applications

  1. Appreciating a World Heritage Site using Multisensory Elements: A Case Study in Kinabalu Park, Sabah, Malaysia

    Directory of Open Access Journals (Sweden)

    Zainol R.

    2014-01-01

    Full Text Available Nature based tourism products offer valuable experience to visitors which can only be appreciated or stimulated using sensory elements. Visual, sound, taste, smell, touch and mobility are sensory elements that are able to enhance visitors’ experience in any particular destination. However, some destinations might not provide all the elements. Therefore this study’s objective is to assess the role of multisensory experience in appreciating the natural heritage of Kinabalu Park. Participant observation is used to carry out the assessment. Findings show visitors are able to appreciate Kinabalu Park using five main sensory elements namely visual, sound, smell, feelings and mobility. The only one that is not available is taste. This is parallel to the products offered in Kinabalu Park which do not allow visitors to pluck any branches or taste any of its forest products. Multisensory elements enhance visitors experience through the senses which will be memorable in years to come. Learning will take place not immediately but through recalling of memories.

  2. Study of trace element metabolism in normal and cancerous mice using multitracer technique

    International Nuclear Information System (INIS)

    Wang Xiao; Kong Fuquan; Zhao Kui; Zhang Xiang; Qin Zhi

    2008-01-01

    A radioactive multitracer solution of the 24 elements, e.g. Be, Na, K, Rb, Mg, Ca, Sr, Ga, As, Sc, V, Cr, Mn, Co, Fe, Zn, Y, Zr, Mo, Nb, To, Ru, Ag and In, was obtained from the nuclear reaction of 25 MeV/u 40 Ar + Se with a series of chemical process. The multitracer solution was orally administered to normal and muscular turnout-bearing mice of male Balb/c mice. Urine and faeces samples of mice were collected. The two group mice were saerificed after 96 h. The uptake of 17 elements, Na, Rb, Ga, As, Sc, V, Cr, Mn, Co, Fe, Zn, Y, Zr, Tc, Ru, Ag and In, were simultaneously detected in normal mice while 15 elements, Na, Rb, Ga, Sc, V, Cr, Mn, Co, Fe, Y, Zr, Tc, Ru, Ag and In, were simultaneously detected in tumour-bearing mice. Our results indicate that the majority of the detected elements were distributed in liver, kidney, pelt, turnout while a small fraction of the biotrace elements were distributed in heart and spleen. (tumour-bearing mice) in the two groups of mice. The higher concentrations of Fe, Na, Mn were detected in heart or kidney of normal mice. Na, Mn, Fe and Co showed better absorption in most tissues in the normal mice, except for Na and Mn in heart. (authors)

  3. The study of trace elements in milk by nuclear analytical techniques

    International Nuclear Information System (INIS)

    Gharib, A.; Rahimi, H.; Peyrovan, H.; Raofei, H.N.J.; Taherpour, H.

    1983-01-01

    This work is part of a project with the IAEA, in a coordinated programme on ''Trace Elements in Human Nutrition and Bio-Environmental Systems'' to evaluate their nutritional requirements, interrelations and the role of Trace Elements in health, metabolism etc. Cow's milk being regarded as one of the most important and nutritious foodstuffs consumed by people. Hence as a first step, an elemental analysis for milk was carried out for this purpose so a few samples of pasteurized milk and local samples were investigated for essential and toxic trace elements. The secondary aim of this project was the assessment of various analytical techniques involved. However, in the present work, the methods involved were AAS, PIXE and NAA. The latter method applied, both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement, there is however, some justification to clarify this internal inconsistency. The precision for NAA and AAS allows greater degree of acceptance respectively. Although PIXE is a very fast and rather a routine but the technique of trace element analysis needs certain adaptations and developments

  4. Galvanic element. Galvanisches Element

    Energy Technology Data Exchange (ETDEWEB)

    Sprengel, D.; Haelbig, H.

    1980-01-03

    The invention concerns a gas-tight sealed accumulator with positive and negative electrode plates and an auxillary electrode electroconductively bound to the latter for suppressing oxygen pressure. The auxillary electrode is an intermediate film electrode. The film catalysing oxygen reduction is hydrophilic in character and the other film is hydrophobic. A double coated foil has proved to be advantageous, the hydrophilic film being formed from polymer-bound activated carbon and the hydrophrobic film from porous polytetrafluoroethylene. A metallic network of silver or nickel is rolled into the outer side of the activated carbon film. This auxillary electrode can be used to advantage in all galvanic elements. Even primary cells fall within the scope of application for auxillary electrodes because many of these contain a highly oxidized electrodic material which tends to give off oxygen.

  5. A study on removal of elemental mercury in flue gas using fenton solution

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yangxian; Wang, Yan; Wang, Qian; Pan, Jianfeng [School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013 (China); Zhang, Yongchun [Jiangsu Province Special Equipment Safety Supervision Inspection Institute (Branch of Wuxi), Wuxi 214000 (China); Zhou, Jianfei [School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013 (China); Zhang, Jun [Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing 210096 (China)

    2015-07-15

    Highlights: • A novel technique on oxidation of Hg{sup 0} using Fenton was proposed. • The effects of several process parameters on Hg{sup 0} removal were studied. • Products and ·OH in solution were detected. • Reaction mechanism of Hg{sup 0} removal was studied. • Simultaneous removal of Hg{sup 0}, NO and SO{sub 2} was also studied. - Abstract: A novel technique on oxidation-separation of elemental mercury (Hg{sup 0}) in flue gas using Fenton solution in a bubbling reactor was proposed. The effects of several process parameters (H{sub 2}O{sub 2} concentration, Hg{sup 0} inlet concentration, Fe{sup 2+} concentration, solution temperature, solution pH, gas flow) and several flue gas components (NO, SO{sub 2}, O{sub 2}, CO{sub 2}, inorganic ions and particulate matters on Hg{sup 0} removal were studied. The results indicate that H{sub 2}O{sub 2} concentration, Fe{sup 2+} concentration, solution pH and gas flow have great effects on Hg{sup 0} removal. Solution temperature, Hg{sup 0}, NO, SO{sub 2}, CO{sub 3}{sup 2−} and HCO{sub 3}{sup −} concentrations also have significant effects on Hg{sup 0} removal. However, Cl{sup −}, SO{sub 4}{sup 2−}, NO{sub 3}{sup −}, O{sub 2} and CO{sub 2} concentrations only have slight effects on Hg{sup 0} removal. Furthermore, reaction mechanism of Hg{sup 0} removal and simultaneous removal process of Hg{sup 0}, NO and SO{sub 2} were also studied. Hg{sup 0} is removed by oxidation of ·OH and oxidation of H{sub 2}O{sub 2}. The simultaneous removal efficiencies of 100% for SO{sub 2}, 100% for Hg{sup 0} and 88.3% for NO were obtained under optimal test conditions. The results demonstrated the feasibility of Hg{sup 0} removal and simultaneous removal of Hg{sup 0}, SO{sub 2} and NO using Fenton solution in a bubbling reactor.

  6. STUDY OF THE EFFECT OF SOIL CEMENT ELEMENTS WHEN STABILIZING ROADBED MODEL IN LABORATORY CONDITIONS

    Directory of Open Access Journals (Sweden)

    V. D Petrenko

    2017-12-01

    Full Text Available Purpose.Experimental studies allow determining th estress-strain state or bearing capacity of the tested soil body. A preliminary study of the results of model testing and experimental research allows us to find the optimal solutions and to justify the parameters of the chosen technology. The purpose of this work is to determine the effect of soil cement elements when stabilizing the roadbed on a weak subgrade using the soil tests in laboratory conditions. Methodology. During the development of measures for the reconstruction and consolidation of soil bodies, their strength is tested using many methods. In all cases, we take into account the physical and mechanical characteristics of soils obtained as a result of research, as well as the existing regulatory documents. We performed the experimental studies by model testing in laboratory conditions. The model testing was based on the corresponding relationships between geometric sizes, mechanical properties of materials, loads and other factors on which the stress-strain state depends. During testing, the model was loaded gradually. We maintained each load level up to conditional stabilization of the soil deformation. We took the readings from measuring devices at each stage of loading after achievement of stabilization of soil mass deformations. We fixed the readings in the test journal. Findings. During stabilization with soil cement piles there is an improvement in mechanical properties, which leads to a decrease in deformations by 2…3.5 times. Each test is accompanied with graphs of relative deformations-stress dependence, as well as deformation curves and compression curves. According to the results of experimental stu-dies, it can be seen that when testing a model with cement piles, compared with a model without soil cement piles, the relative deformations of the samples taken prior to the experiment and after the experiment almost coincide, indicating a decrease in deformability under

  7. Some Applications of X-Ray Based Elemental Analysis Methods for Romanian Gold Minerals Studies

    International Nuclear Information System (INIS)

    Stan, D.; Constantinescu, B.; Pauna, C.; Neacsu, A.; Popescu, G.

    2009-01-01

    The elemental composition of gold, gold minerals and gold associated minerals releases important information's both from scientific (geologic) and economic point of view. In the present work, we focused on samples from Rosia Montana and Musariu ore deposits, from so called T ransylvanian gold of the golden q uadrilateral , Metaliferi Mountains. Our investigation started using optical microscopy. On the sample from Rosia Montana native gold band could be macroscopically seen. Gold occurs also like native gold in carbonate minerals, or associated with galena, sphalerite, chalcopyrite and quartz. The sample from Musariu shows native gold distributed at the border of sphalerite, native gold enclosed and along the margins of sphalerite and native gold between quartz grains. Three X-ray (the emission of characteristic lines spectra for each element present in the sample) based elemental analysis methods were also used: X-Ray Fluorescence (XRF), micro Synchrotron Radiation induced X-Ray Fluorescence (micro-SR-XRF) and micro Proton Induced X-Ray Emission (micro-PIXE). Our XRF methods are based on Xray tube spectrometers: a portable one - X-MET 3000TX and a stationary one - Spectro MIDEX. The two Rosia Montana and Musariu gold samples were studied using the micro-PIXE technique at the AN2000 accelerator of Laboratory Nazionale di Legnaro (LNL), INFN, Italy - maps and point spectra. The experiment was carried out with a 2 MeV proton microbeam (9 μm 2 beam area), maximum beam current 400 pA. The characteristic X-rays were measured with a Canberra HPGe detector (with 180 eV FWHM at 5.9 keV). Complementary experiments on the samples due the improved condition offered by the high energy X-rays, namely -Sb, Sn, Te detection, were performed at BESSY Synchrotron Radiation Facility, Berlin - point spectra. During the experiment, point spectra were acquired at 35 keV, excitation energy, using a spatially resolved synchrotron-radiation XRF setup detected to analyses. The XRF

  8. The Prosthetic Influence and Biomechanics on Peri-Implant Strain: a Systematic Literature Review of Finite Element Studies

    Directory of Open Access Journals (Sweden)

    Julius Maminskas

    2016-09-01

    Full Text Available Objectives: To systematically review risks of mechanical impact on peri-implant strain and prosthetic influence on stability across finite element studies. Material and Methods: An online literature search was performed on MEDLINE and EMBASE databases published between 2011 and 2016. Following keywords tiered screening and selection of the title, abstract and full-text were performed. Studies of finite element analysis (FEA were considered for inclusion that were written in English and revealed stress concentrations or strain at peri-implant bone level. Results: There were included 20 FEA studies in total. Data were organized according to the following topics: bone layers, type of bone, osseointegration level, bone level, design of implant, diameter and length of implant, implant-abutment connection, type of supra-construction, loading axis, measurement units. The stress or strain at implant-bone contact was measured over all studies and numerical values estimated. Risks of overloading were accented as non-axial loading, misfits, cantilevers and the stability of peri-implant bone was related with the usage of platform switch connection of abutment. Conclusions: Peri-implant area could be affected by non-axial loading, cantilever prosthetic elements, crown/implant ratio, type of implant-abutment connection, misfits, properties of restoration materials and antagonistic tooth. The heterogeneity of finite element analysis studies limits systematization of data. Results of these studies are comparable with other findings of in vitro, in vivo, prospective and retrospective studies.

  9. Elemental abundance studies of CP stars. II. The silicon stars HD 133029 and HD 192913

    CERN Document Server

    López-García, Z

    1999-01-01

    For pt.1 see ibid., vol.107, no.2, p.353-63 (1994). Fine analyses of the silicon stars HD 133029 and HD 192913 are presented using ATLAS9 model atmospheres whose predictions fit the optical region spectrophotometry and H gamma profiles and have the same bulk metallicity as the deduced abundances. Both are very He poor stars. The light elements are mostly solar except for silicon, and all the heavier elements, except nickel in HD 133029 which is solar, are greatly overabundant. The iron peak elements are typically 10 times overabundant. SrYZr are of order of 100 times solar. The rare earths are 1000 or more times overabundant. Table 4 is is only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/Abstract.html. (50 refs).

  10. Population specific absorption studies for some diet incorporated trace elements : comparison with ICRP data

    International Nuclear Information System (INIS)

    Parameswaran, M.; Dang, H.S.

    1999-01-01

    Daily intake and excretion can provide an important information regarding the absorption through the gastro-intestinal tract (f1 factor) of trace elements incorporated in diet. The absorption may depend upon the kind of diet consumed, the content of the fibre, protein etc and it could be quite different for two populations groups with entirely different food habits. ICRP has provided data on the intake and excretion of 63 trace elements by Caucasian population representing North American and European adults. This paper reports intake and excretion of twelve elements Na, K, Ca, Mg, Cu, Mn, Rb, Fe, Zn, Sr, Li and Cr for an urban adult Indian population group and compares with corresponding data on ICRP reference man. (author)

  11. Study of radon, thoron and toxic elements in some textile dyes

    International Nuclear Information System (INIS)

    Abel-Ghany, H.A.

    2013-01-01

    Elemental analysis of textile dyes may provide valuable information concerning the content and concentrations of element, especially the toxic ones. Such information monitors the safety of handling and using these dyes in textile industry. In addition to the safety of wearing of clothes stained with these dyes. In the present work, the specific activity of both radon and thoron were measured in nine textile dyes by using alpha emitters registration which are emitted from radon and thoron gases in CR-39 nuclear track detectors. Unexpectedly, the results obtained reports a high concentration of both radon and thoron gases in some samples (samples D5 and D9). Also the concentration of toxic elements (Cu, Pb, Zn, Mn, Cd and Cr) in textile dyes were determined by flame and graphite furnace atomic absorption spectrometry. (author)

  12. A study based on trace elements of differentiated metabasic rocks from the Machado-MG region

    International Nuclear Information System (INIS)

    Choudhuri, A.; Carvalho, S.G. de.

    1983-01-01

    Large metabasic intrusive bodies occur in the Precambrian gneiss-migmatite basement around Poco Fundo - Campestre - Machado Triangle, south Minas Gerais. Separate occurrences consisting in each case of pyroxenite, metagabbro and amphibolite seem to be related to each other as is evident from their mineralogy, texture and trends of trace element concentration when plotted against their mg number (Mg/MgO + FeO mol.). Furthermore, their trace elements indicate that these rocks belong to a differentiated sequence resulting from separation of pyroxenes in situ. In spite of their high large ion lithophile element contents comparable to calc-alcaline rocks, the metabasic rocks show close resemblance to present-day mid-ocean ridge basalts when these are plotted in relevant variation diagrams. The tectonic implication of the observations is, however, not yet clear. (Author) [pt

  13. Study on provenance of ancient Yaozhou porcelain bodies by fingerprint elements scatter analysis

    International Nuclear Information System (INIS)

    Zhao Weijuan; Guo Min; Gao Zhengyao; Li Guoxia; Xie Jianzhong

    2004-01-01

    25 samples of Yaozhou porcelain bodies, 3 samples of the tri-color pottery bodies during the Tang Dynasty, 1 samples of Saggar material during Song Dynasty and 4 samples of clay mineral taken from the place near Yaozhou Kiln Museum was selected. The technique of neutron activation analysis (NAA) has been employed to measure the content of 29 kinds of elements in the samples. 8 elements of them were selected as fingerprint elements to make scatter analysis. The conclusion is that the ancient Yaozhou porcelain bodies produced by different kilns have long shared a stable and concentrated raw material sources. Both the tri-colored pottery bodies made in Yaozhou Kilns during the Tang Dynasty and the Yaozhou porcelain bodies are from the same provenance. (authors)

  14. Studying some regimes of the WWER-440 type reactor failed fuel element operation

    International Nuclear Information System (INIS)

    Aksenov, N.A.; Samsonov, B.V.; Sulaberidze, V.Sh.; Frej, A.K.

    1981-01-01

    The results of investigating the serviceability of experimental fuel elements close by type to that of the WWER-440 type reactor in the cans of which untightness in the form of small opening are made. The tests are carried out in the SM-2 reactor high temperature water loop at the temperature of 473 K, pressure of (1-2)x10 4 kPa, coolant flow rate of 3.7-5.5 m 3 /h. The analysis of the obtained results shows that the character of changes in the fission product (FP) activity in the circuit in a considerable extent is determined bt the thermal-optical conditions of the fuel element operation. If water in the gap between fuel and can does not boil, activity changes smoothly and bursts caused by increased FP release are observed only under transient conditions of reactor operation. In the presence of water boiling in the gap the FP release has of impulse character with the frequency determined besides the untightness dimension by free volume inside the fuel element can (with its increase the pulsation frequency increases). FP release from fuel is connected with their direct escape from an open surface. When water in the gap the FP release from the fuel element occurs practically immediately. Without boiling the FP delay in the gap is determined by their diffusion in a layer of water. The conclusion is drawn that the FP release from failed fuel elements may be reduced by eliminating the water boiling in the gap between the fuel and the can by means of the fuel element power or coolant temperature decrease

  15. Electrochemical and spectroscopic studies of some less stable oxidation states of selected lanthanide and actinide elements

    International Nuclear Information System (INIS)

    Hobart, D.E.

    1981-06-01

    Simultaneous observation of electrochemical and spectroscopic properties (spectroelectrochemistry) at optically transparent electrodes (OTE's) was used to study some less stable oxidation states of selected lanthanide and actinide elements. Cyclic voltammetry at microelectrodes was used in conjunction with spectroelectrochemistry for the study of redox couples. Additional analytical techniques were used. The formal reduction potential (E 0 ') values of the M(III)/M(II) redox couples in 1 M KCl at pH 6 were -0.34 +- 0.01 V for Eu, -1.18 +- 0.01 V for Yb, and -1.50 +- 0.01 V for Sm. Spectropotentiostatic determination of E 0 ' for the Eu(III)/Eu(II) redox couple yielded a value of -0.391 +- 0.005 V. Spectropotentiostatic measurement of the Ce(IV)/Ce(III) redox couple in concentrated carbonate solution gave E 0 ' equal to 0.051 +- 0.005 V, which is about 1.7 V less positive than the E 0 ' value in noncomplexing solution. This same difference in potential was observed for the E 0 ' values of the Pr(IV)/Pr(III) and Tb(IV)/Tb(III) redox couples in carbonate solution, and thus Pr(IV) and Tb(IV) were stabilized in this medium. The U(VI)/U(V)/U(IV) and U(IV)/U(III) redox couples were studied in 1 M KCl at OTE's. Spectropotentiostatic measurement of the Np(VI)/Np(V) redox couple in 1 M HClO 4 gave an E 0 ' value of 1.140 +- 0.005 V. An E 0 ' value of 0.46 +- 0.01 V for the Np(VII)/Np(VI) couple was found by voltammetry. Oxidation of Am(III) was studied in concentrated carbonate solution, and a reversible cyclic voltammogram for the Am(IV)/Am(III) couple yielded E 0 ' = 0.92 +- 0.01 V in this medium; this value was used to estimate the standard reduction potential (E 0 ) of the couple as 2.62 +- 0.01 V. Attempts to oxidize Cm(III) in concentrated carbonate solution were not successful which suggests that the predicted E 0 value for the Cm(IV)/Cm(III) redox couple may be in error

  16. Mobility of selected trace elements in Mediterranean red soil amended with phosphogypsum: experimental study.

    Science.gov (United States)

    Kassir, Lina Nafeh; Darwish, Talal; Shaban, Amin; Ouaini, Naim

    2012-07-01

    Soil amendment by phosphogypsum (PG) application becomes of increasing importance in agriculture. This may lead, however, to soil, plant, and groundwater contamination with trace elements (TEs) inherently present in PG. Monitoring of selected TEs (Pb, Zn, Cu, and Cd) distribution and mobility in a Mediterranean red soil profile has been performed in soil parcels applied with PG over a 16-month period. Concentrations were measured in soil and plant samples collected from various depth intervals at different points in time. TEs sequential extraction was performed on soil and PG samples. Results showed soil profile enrichment peaked 5 months after PG application for Cd, and 12 months for Pb, Zn, and Cu. Rainwater, pH, total organic carbon, and cationic exchange capacity were the main controlling factors in TEs accumulation in soils. Cd was transferred to a soil depth of about 20 cm. Zn exhibited mobility towards deeper layers. Pb and Cu were accumulated in around 20-55-cm-deep layers. PG increased the solubility of the studied TEs; PG-applied soils contained TEs bound to exchangeable and acid-soluble fractions in higher percentages than reference soil. Pb, Zn, and Cu were sorbed into mineral soil phases, while Cd was mainly found in the exchangeable (bio-available) form. The order of TEs decreasing mobility was Zn > Cd > Pb > Cu. Roots and leaves of existed plants, Cichorium intybus L., accumulated high concentrations of Cd (1-2.4 mg/kg), exceeding recommended tolerable levels, and thus signifying potential health threats through contaminated crops. It was therefore recommended that PG should be applied in carefully established, monitored, and controlled quantities to agricultural soils.

  17. Sacroiliac Joint Fusion Minimally Affects Adjacent Lumbar Segment Motion: A Finite Element Study.

    Science.gov (United States)

    Lindsey, Derek P; Kiapour, Ali; Yerby, Scott A; Goel, Vijay K

    2015-01-01

    Adjacent segment disease is a recognized consequence of fusion in the spinal column. Fusion of the sacroiliac joint is an effective method of pain reduction. Although effective, the consequences of sacroiliac joint fusion and the potential for adjacent segment disease for the adjacent lumbar spinal levels is unknown. The objective of this study was to quantify the change in range of motion of the sacroiliac joint and the adjacent lumbar spinal motion segments due to sacroiliac joint fusion and compare these changes to previous literature to assess the potential for adjacent segment disease in the lumbar spine. An experimentally validated finite element model of the lumbar spine and pelvis was used to simulate a fusion of the sacroiliac joint using three laterally placed triangular implants (iFuse Implant System, SI-BONE, Inc., San Jose, CA). The range of motion of the sacroiliac joint and the adjacent lumbar spinal motion segments were calculated using a hybrid loading protocol and compared with the intact range of motion in flexion, extension, lateral bending, and axial rotation. The range of motions of the treated sacroiliac joints were reduced in flexion, extension, lateral bending, and axial rotation, by 56.6%, 59.5%, 27.8%, and 53.3%, respectively when compared with the intact condition. The stiffening of the sacroiliac joint resulted in increases at the adjacent lumbar motion segment (L5-S1) for flexion, extension, lateral bending, and axial rotation, of 3.0%, 3.7%, 1.1%, and 4.6%, respectively. Fusion of the sacroiliac joint resulted in substantial (> 50%) reductions in flexion, extension, and axial rotation of the sacroiliac joint with minimal (sacroiliac joint fusion, the long-term clinical results remain to be investigated.

  18. A quantitative study of computer tomography images of the lumbar posterior elements

    International Nuclear Information System (INIS)

    Yamazaki, Ken

    1985-01-01

    The posterior elements of the lumbar spine in 125 vertebrae of 62 cases were studied quantitatively by computer tomography. The cases were classified into 4 groups: Group I (15 cases): Young (20 - 50 years old), normal by radiography and asymptomatic. Group II (15 cases): Aged (over 50 years old), spondylosis deformans by radiography and asymptomatic. Group III (15 cases): Aged spondylosis deformans by radiography and symptomatic. Group IV (17 cases): Aged, degenerative spondylolisthesis by radiography and symptomatic. The posterior recess consisting of the superior articular process (SAP) and the inferior articular process (IAP) (canal side) was measured by computer tomography. A relationship was found between the onset of symptoms and the effective area of the posterior recess (i.e. the area of the posterior recess without yellow ligament) for normal function (i.e. no block observed by myelography). In particular a bulging disc was observed near the entrance of the posterior recess by CT scan in the symptomatic groups. The factors which were related to the effective area were changes in the disc and yellow ligament, the entrance of the posterior recess, the prominence of IAP (canal side), and the superior articular facet angle. An index of the decrease in the effective area of the posterior recess calculated from four factors. Given that the length of the entrance of the posterior recess is the interfacetal distance (IFD), the depth of the posterior recess is the midsagittal distance (MSD) and the effective area is S, then RS = (IFD x MSD x 1/2-S)/(IFD x MSD x 1/2) x 100 (%) = [1 - (2 x S/(IFD x MSD))] x 100 (%) where RS = the narrowing ratio. The quantitative index of decrease in the effective area of the posterior recess (i.e. the narrowing ratio) may be useful in the diagnosis of degenerative lumbar spinal disease where the disc was bulging. (J.P.N.)

  19. Simplified versus geometrically accurate models of forefoot anatomy to predict plantar pressures: A finite element study.

    Science.gov (United States)

    Telfer, Scott; Erdemir, Ahmet; Woodburn, James; Cavanagh, Peter R

    2016-01-25

    Integration of patient-specific biomechanical measurements into the design of therapeutic footwear has been shown to improve clinical outcomes in patients with diabetic foot disease. The addition of numerical simulations intended to optimise intervention design may help to build on these advances, however at present the time and labour required to generate and run personalised models of foot anatomy restrict their routine clinical utility. In this study we developed second-generation personalised simple finite element (FE) models of the forefoot with varying geometric fidelities. Plantar pressure predictions from barefoot, shod, and shod with insole simulations using simplified models were compared to those obtained from CT-based FE models incorporating more detailed representations of bone and tissue geometry. A simplified model including representations of metatarsals based on simple geometric shapes, embedded within a contoured soft tissue block with outer geometry acquired from a 3D surface scan was found to provide pressure predictions closest to the more complex model, with mean differences of 13.3kPa (SD 13.4), 12.52kPa (SD 11.9) and 9.6kPa (SD 9.3) for barefoot, shod, and insole conditions respectively. The simplified model design could be produced in 3h in the case of the more detailed model, and solved on average 24% faster. FE models of the forefoot based on simplified geometric representations of the metatarsal bones and soft tissue surface geometry from 3D surface scans may potentially provide a simulation approach with improved clinical utility, however further validity testing around a range of therapeutic footwear types is required. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Simultaneous estimation of Poisson's ratio and Young's modulus using a single indentation: a finite element study

    International Nuclear Information System (INIS)

    Zheng, Y P; Choi, A P C; Ling, H Y; Huang, Y P

    2009-01-01

    Indentation is commonly used to determine the mechanical properties of different kinds of biological tissues and engineering materials. With the force–deformation data obtained from an indentation test, Young's modulus of the tissue can be calculated using a linear elastic indentation model with a known Poisson's ratio. A novel method for simultaneous estimation of Young's modulus and Poisson's ratio of the tissue using a single indentation was proposed in this study. Finite element (FE) analysis using 3D models was first used to establish the relationship between Poisson's ratio and the deformation-dependent indentation stiffness for different aspect ratios (indentor radius/tissue original thickness) in the indentation test. From the FE results, it was found that the deformation-dependent indentation stiffness linearly increased with the deformation. Poisson's ratio could be extracted based on the deformation-dependent indentation stiffness obtained from the force–deformation data. Young's modulus was then further calculated with the estimated Poisson's ratio. The feasibility of this method was demonstrated in virtue of using the indentation models with different material properties in the FE analysis. The numerical results showed that the percentage errors of the estimated Poisson's ratios and the corresponding Young's moduli ranged from −1.7% to −3.2% and 3.0% to 7.2%, respectively, with the aspect ratio (indentor radius/tissue thickness) larger than 1. It is expected that this novel method can be potentially used for quantitative assessment of various kinds of engineering materials and biological tissues, such as articular cartilage

  1. Influence of an interpositional spacer on the behaviour of the tibiofemoral joint: a finite element study.

    Science.gov (United States)

    Checa, S; Taylor, M; New, A

    2008-10-01

    Interpositional arthroplasty is considered by many surgeons for the treatment of isolated medial compartment osteoarthritis of the knee. In this procedure, an interpositional spacer is inserted into the medial compartment of the joint with no bone resection and no mechanical fixation. Major problems such as implant dislocation, severe pain or need for revision have been reported post-operatively. In this study, the kinematics of a knee implanted with an interpositional spacer made of either polyurethane or cobalt-chrome during walking, stair ascent and squatting cycles have been predicted and compared to the normal knee using finite element analysis. In addition, articular cartilage stress histories have been examined to obtain distributions of cumulative stress, a measure of the likelihood of articular cartilage degeneration. The insertion of a polyurethane interpositional spacer in the medial side of the knee did not affect knee kinematics as compared to the normal knee, but caused an increase of articular cartilage cumulative contact stress exposures in the medial compartment of the joint. The knee implanted with the Co-Cr spacer exhibited similar trends in knee kinematics, however significantly different ranges of motion were observed during some periods of the activity cycles, specifically during the first half of the walking cycle where lower ranges of motion were predicted. In addition, higher articular cartilage cumulative contact stress exposures were observed in both compartments of the knee. In both cases, cumulative contact stress exposures of the tibial articular cartilage were more affected than those of the femoral articular cartilage. These results suggest implant material as an important parameter in the design phase of interpositional spacers.

  2. Trace element phytoextraction from contaminated soil: a case study under Mediterranean climate.

    Science.gov (United States)

    Guidi Nissim, Werther; Palm, Emily; Mancuso, Stefano; Azzarello, Elisa

    2018-03-01

    The current field study aims to assess the suitability of four different plant species (i.e. poplar, willow, hemp and alfalfa) to be used for trace element (TE) (i.e. Cd, Cu, Ni, Pb and Zn) phytoextraction under hot-arid Mediterranean climate conditions. Plants were grown for two consecutive years on a moderate TE contaminated soil, supplied with water and mineral nutrients. The growth and physiological parameters were assessed throughout the trial to compare the response of plants to the environmental pollution, and TE uptake rates were measured for aboveground plant tissues. The phytoextraction rate for each species was expressed as a function of aboveground biomass yield and the TE uptake and translocation within the plant. Alfalfa played a significant role in reducing extractable Ni (60.6%) and Zn (46%) in the soil, whereas hemp reduced 32% of extractable Cd and 46% of extractable Pb; poplar decreased extractable Cd (37%), Ni (49%), Pb (46%) and Zn (63%); and willow reduced the extractable Zn (73%) compared to the beginning of the trial. No change in total TE content was observed; however, poplar and willow were able to extract and accumulate the highest amount of Zn (3200 and 5200 g ha -1  year -1 respectively) and Cu (182 and 116 g ha -1  year -1 ), whereas hemp, with 36 g ha -1  year -1 , showed the best phytoextraction potential for Pb. Overall, we found a positive correlation between the phytoextraction rate and biomass yield, extractable TE concentration and translocation factor (TF) and a negative relationship with Ca concentration in the soil.

  3. Discrete element simulation studies of angles of repose and shear flow of wet, flexible fibers.

    Science.gov (United States)

    Guo, Y; Wassgren, C; Ketterhagen, W; Hancock, B; Curtis, J

    2018-04-18

    A discrete element method (DEM) model is developed to simulate the dynamics of wet, flexible fibers. The angles of repose of dry and wet fibers are simulated, and the simulation results are in good agreement with experimental results, validating the wet, flexible fiber model. To study wet fiber flow behavior, the model is used to simulate shear flows of wet fibers in a periodic domain under Lees-Edwards boundary conditions. Significant agglomeration is observed in dilute shear flows of wet fibers. The size of the largest agglomerate in the flow is found to depend on a Bond number, which is proportional to liquid surface tension and inversely proportional to the square of the shear strain rate. This Bond number reflects the relative importance of the liquid-bridge force to the particle's inertial force, with a larger Bond number leading to a larger agglomerate. As the fiber aspect ratio (AR) increases, the size of the largest agglomerate increases, while the coordination number in the largest agglomerate initially decreases and then increases when the AR is greater than four. A larger agglomerate with a larger coordination number is more likely to form for more flexible fibers with a smaller bond elastic modulus due to better connectivity between the more flexible fibers. Liquid viscous force resists pulling of liquid bridges and separation of contacting fibers, and therefore it facilitates larger agglomerate formation. The effect of liquid viscous force is more significant at larger shear strain rates. The solid-phase shear stress is increased due to the presence of liquid bridges in moderately dense flows. As the solid volume fraction increases, the effect of fiber-fiber friction coefficient increases sharply. When the solid volume fraction approaches the maximum packing density, the fiber-fiber friction coefficient can be a more dominant factor than the liquid bridge force in determining the solid-phase shear stress.

  4. Experimental study on ZnO-TiO_2 sorbents for the removal of elemental mercury

    International Nuclear Information System (INIS)

    Qiu, Kunzan; Zhou, Jinsong; Qi, Pan; Zhou, Qixin; Gao, Xiang; Luo, Zhongyang

    2017-01-01

    ZnO-TiO_2 sorbents synthesized by an impregnation method were characterized through XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy) and EDS (Energy dispersive spectrometer) analyses. An experiment concerning the adsorption of Hg0 by ZnO-TiO_2 under a simulated fuel gas atmosphere was then conducted in a benchscale fixed-bed reactor. The effects of ZnO loading amounts and reaction temperatures on Hg"0 removal performance were analyzed. The results showed that ZnO-TiO_2 sorbents exhibited excellent Hg removal capacity in the presence of H2S at 150 .deg. C and 200 .deg. C; 95.2% and 91.2% of Hg0 was removed, respectively, under the experimental conditions. There are two possible causes for the H_2S reacting on the surface of ZnO-TiO_2: (1) H_2S directly reacted with ZnO to form ZnS, (2) H_2S was oxidized to elemental sulfur (S_a_d) by means of active oxygen on the sorbent surface, and then Sad provided active absorption sites for Hg0 to form HgS. This study identifies three reasons why higher temperatures limit mercury removal. First, the reaction between Hg"0 and H_2S is inhibited at high temperatures. Second, HgS, as the resulting product in the reaction of mercury removal, becomes unstable at high temperatures. Third, the desulfurization reaction strengthens at higher temperatures, and it is likely that H_2S directly reacts with ZnO, thus decreasing the Sad on the sorbent surfaces.

  5. Studies on antifungal activity and elemental composition of the medicinal plant trianthema pentendra linn

    International Nuclear Information System (INIS)

    Pirzada, A.J.; Shaikh, W.; Ghaffar, S.A.

    2010-01-01

    Antifungal activity of crude solvent and aqueous extracts of the medicinal plant, Trianthema pentendra Linn., against the dermatophytic fungi, Aspergillus niger, Aspergillus flavus, Paecilomyces varioti, Microsporum gypseum and Trichophyton rubrum revealed that ethanol and aqueous extracts were the most effective antifungal agents as compared to methanol, chloroform and ethyl acetate extracts. Some basic elements, Al, Ca, Cu, Fe, Mg, Mn, P, S and Zn were also determined in the medicinal plant, T. pentendra, using atomic absorption spectrophotometry and U.V spectrophotometry. T. pentendra contained considerable amount of elements which have therapeutic effects in skin diseases. (author)

  6. Applications of a global nuclear-structure model to studies of the heaviest elements

    International Nuclear Information System (INIS)

    Moeller, P.; Nix, J.R.

    1993-01-01

    We present some new results on heavy-element nuclear-structure properties calculated on the basis of the finite-range droplet model and folded-Yukawa single-particle potential. Specifically, we discuss calculations of nuclear ground-state masses and microscopic corrections, α-decay properties, β-decay properties, fission potential-energy surfaces, and spontaneous-fission half-lives. These results, obtained in a global nuclear-structure approach, are particularly reliable for describing the stability properties of the heaviest elements

  7. Activation analysis in a multitechnique study of trace element imbalances in age-related neurological diseases

    International Nuclear Information System (INIS)

    Ehmann, W.D.; Ding, X.X.; Khare, S.S.; Lovell, M.A.; Ni, B.F.; Tandon, L.; Vance, D.E.; Wenstrup, D.E.

    1993-01-01

    It has been suggested that several age-related neurological diseases such as Alzheimer's disease and amyotrophic lateral sclerosis may be related to environmental toxins. Bulk sample multielemental analyses by INAA alone are not adequate to define the role of trace elements in these diseases. A multitechnique approach has been developed that incorporates 14 MeV, instrumental reactor, radiochemical, and pre-irradiation chemical neutron activation analysis, together with laser microprobe mass spectrometry. The analytical scheme is able to provide bulk or protein normalized elemental concentrations, as well as microstructural, cellular, and subcellular localization information. (author) 21 refs.; 3 figs.; 3 tabs

  8. Elements of design and aesthetics on the beer market in Romania. Case Study: Tuborg

    Directory of Open Access Journals (Sweden)

    Anca MADAR

    2015-12-01

    Full Text Available Due to the development and modernization of trade, the packaging is a very valuable component of marketing policy, being a carrier of messages to the consumer. Classic elements of design that include any packaging refer to the shape, colour and graphics. The beer market in Romania was marked by originality and innovation in terms of packaging design elements. Tuborg is the leading brand in the portfolio of URBB and the first Tuborg beer bottle was produced in Romania in 1997. The Tubog beer is identified on the market by a special package that was always improved.

  9. Numerical Study on Several Stabilized Finite Element Methods for the Steady Incompressible Flow Problem with Damping

    Directory of Open Access Journals (Sweden)

    Jilian Wu

    2013-01-01

    Full Text Available We discuss several stabilized finite element methods, which are penalty, regular, multiscale enrichment, and local Gauss integration method, for the steady incompressible flow problem with damping based on the lowest equal-order finite element space pair. Then we give the numerical comparisons between them in three numerical examples which show that the local Gauss integration method has good stability, efficiency, and accuracy properties and it is better than the others for the steady incompressible flow problem with damping on the whole. However, to our surprise, the regular method spends less CPU-time and has better accuracy properties by using Crout solver.

  10. Rare earth element and neodymium isotope tracing of element input and past ocean circulation. Study from north and south pacific seawater and sediments

    Energy Technology Data Exchange (ETDEWEB)

    Froellje, Henning

    2016-08-09

    Ocean circulation and cycling of trace elements within the oceanic water column is of great significance for modern and past climates. The global overturning circulation is responsible for the distribution of water masses, heat and particulate and dissolved compounds, while biological and chemical processes, such as primary productivity or particle scavenging, control the cycling of nutrients and trace elements in the ocean, and ultimately influence the ocean-atmosphere exchange of carbon. Rare earth elements (REE) and neodymium (Nd) isotopes are widely used as tracers for lithogenic element fluxes and modern and past ocean circulation and water mass mixing. The use of Nd isotopes in paleoceanographic investigations is based on the precise knowledge of processes involved in REE cycling and of the modern oceanic Nd isotope distribution. The Pacific is the largest of the world oceans, but it is highly underrepresented in present-day and past seawater Nd isotope and REE investigations compared to the Atlantic Ocean. In this study, Nd isotopes and REEs are analysed in North Pacific seawater (chapter 2) and sediment samples from the South Pacific (chapters 3-5) to contribute to a better understanding of sources and cycling of REEs and Nd isotopes in present-day seawater and to investigate past water mass mixing and circulation changes during the last glacial termination and throughout the last glacial-interglacial cycle. Neodymium isotopes in seawater and sedimentary archives (fossil fish teeth and debris, foraminifera, ferromanganese oxides, lithogenic particles) were analysed using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS), and REE concentrations were analysed using isotope dilution ICP-MS. Results from combined analysis of REEs, and Nd and radium isotopes from North Pacific seawater (coastal seawaters of the Hawaiian Island of Oahu and seawater from the offshore Hawaii Ocean Time-series Station ALOHA) show a clear influence of the

  11. Rare earth element and neodymium isotope tracing of element input and past ocean circulation. Study from north and south pacific seawater and sediments

    International Nuclear Information System (INIS)

    Froellje, Henning

    2016-01-01

    Ocean circulation and cycling of trace elements within the oceanic water column is of great significance for modern and past climates. The global overturning circulation is responsible for the distribution of water masses, heat and particulate and dissolved compounds, while biological and chemical processes, such as primary productivity or particle scavenging, control the cycling of nutrients and trace elements in the ocean, and ultimately influence the ocean-atmosphere exchange of carbon. Rare earth elements (REE) and neodymium (Nd) isotopes are widely used as tracers for lithogenic element fluxes and modern and past ocean circulation and water mass mixing. The use of Nd isotopes in paleoceanographic investigations is based on the precise knowledge of processes involved in REE cycling and of the modern oceanic Nd isotope distribution. The Pacific is the largest of the world oceans, but it is highly underrepresented in present-day and past seawater Nd isotope and REE investigations compared to the Atlantic Ocean. In this study, Nd isotopes and REEs are analysed in North Pacific seawater (chapter 2) and sediment samples from the South Pacific (chapters 3-5) to contribute to a better understanding of sources and cycling of REEs and Nd isotopes in present-day seawater and to investigate past water mass mixing and circulation changes during the last glacial termination and throughout the last glacial-interglacial cycle. Neodymium isotopes in seawater and sedimentary archives (fossil fish teeth and debris, foraminifera, ferromanganese oxides, lithogenic particles) were analysed using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS), and REE concentrations were analysed using isotope dilution ICP-MS. Results from combined analysis of REEs, and Nd and radium isotopes from North Pacific seawater (coastal seawaters of the Hawaiian Island of Oahu and seawater from the offshore Hawaii Ocean Time-series Station ALOHA) show a clear influence of the

  12. Studies of the source complex behaviour and of the ultrasound radiation of contact flexible multi-element transducers

    International Nuclear Information System (INIS)

    Amory, V.

    2007-12-01

    This work deals with the ultrasonic nondestructive testing of parts with complex geometries using soft multi-element sensors. The different types of contact control configurations are presented first. Then, the difficulties encountered with conventional contact transducers are explained and the multi-element piezoelectric transducers technology, developed to meet these difficulties, is presented. The second chapter presents the results of finite-element calculations showing the complexity of a transducer in a condition of testing utilization. In a same configuration, the radiated far field calculated by finite-elements is compared to the measurement in order to validate the way the source behaviour is calculated. However, despite the efficiency of the finite-elements simulation, this tool is numerically too costly and cannot be used to optimize a full multi-element transducer. Therefore, a realistic source model is built and implemented in a radiation code based on high-frequency asymptotic approximations where only L and T volume waves are calculated. The incapacity of this model to reproduce the behaviour of T waves in some directions of propagation has led to give a particular attention to the fore-waves, neglected in the radiation calculation. Chapter 3 treats of the building of an exact radiation model taking into consideration the fore-waves contribution emitted by a contact transducer exerting a random space-time distribution constraint at the surface of the considered medium. A radiation model, based on the calculation of exact Green functions of the Lamb problem is proposed. The exact model is particularly interesting in the case of sensor geometries with a long length with respect to other dimensions (2D case). Field calculation results are shown for an element of the matrix network (3D case) and for a linear element (2D case). A study of different existing approached models is carried out as well. The last chapter presents some results of the field

  13. In vitro radio autographic studies of the biodistribution of radiopharmaceuticals on blood elements

    International Nuclear Information System (INIS)

    Eipoll-Hamer, E.; De Paula, E.F.; Freitas, L.C.; Pereira, M.J.S.; Carvalho, J.J.; Porto, L.C.M.S.; Fonseca, L.M.; Gutfilen, B.; Bernardo Filho, M.

    1998-01-01

    In the present study we evaluated the binding of the radiopharmaceuticals sodium pertechnetate (Na 99m Tc O 4 ), methylene-diphosphonic acid ( 99m Tc-M D P) and glucoheptonate acid ( 99m Tc-G H A) to blood elements using centrifugation and radio autographic techniques. Heparinized blood was incubated with the labelled compounds for 0,1,2,3,4, 6 and 24 h. Plasma (P) and blood cells (B C) were isolated and precipitated with 5% trichloroacetic acid (TCA), and soluble (S F) and insoluble fractions (IF) were separated. Blood samples were prepared (0 and 24 h) and coated with Lm-1 radio autographic emulsions and percent radioactivity (%rad) in P and B C was determined. The binding of Na 99m Tc O 4 (5 rad) to P was 61.2 (0 h) and 46.0% (24 h), and radioautography showed 63.7% (0 h) and 43.3% (24 h). The binding to B C was 38.8% (0 h) and 54.0% (24 h), and radioautography showed 36.3% (0 h) and 56.7% (24 h). 99m Tc-M D P study presented 91.1% (0 h) to P and 87.2%(24 h), and radioautography showed presented 91.1% (0 h) to P and 87.2% (24 h), and radioautography showed 67.9% (0 h) and 67.4% (24 h). The binding to B C was 8.9% (0 h) and 12.8% (24 h), and radioautography showed 32.1% (0 h) and 32.6% (24 h). 99m Tc-G H A study was 90.1% (0 h) to P and 79.9% (24 h), and radioautography showed 67.2% (0 h) and 60.1% (24 h). The binding to B C was 9.9% (0 h) and 20.1% (24 h), and radioautography showed 32.8% (0 h) and 39.9% (24 h). The comparison of the obtained results suggests that the binding to plasma and blood cells in the two techniques used (radioautography and centrifugation) is qualitatively in accordance. (author)

  14. In vitro radioautographic studies of the biodistribution of radiopharmaceuticals on blood elements

    Directory of Open Access Journals (Sweden)

    Ripoll-Hamer E.

    1998-01-01

    Full Text Available In the present study we evaluated the binding of the radiopharmaceuticals sodium pertechnetate (Na 99mTcO4, methylenediphosphonic acid (99mTc-MDP and glucoheptonate acid (99mTc-GHA to blood elements using centrifugation and radioautographic techniques. Heparinized blood was incubated with the labelled compounds for 0, 1, 2, 3, 4, 6 and 24 h. Plasma (P and blood cells (BC were isolated and precipitated with 5% trichloroacetic acid (TCA, and soluble (SF and insoluble fractions (IF were separated. Blood samples were prepared (0 and 24 h and coated with LM-1 radioautographic emulsions and percent radioactivity (%rad in P and BC was determined. The binding of Na 99mTcO4 (%rad to P was 61.2% (0 h and 46.0% (24 h, and radioautography showed 63.7% (0 h and 43.3% (24 h. The binding to BC was 38.8% (0 h and 54.0% (24 h, and radioautography showed 36.3% (0 h and 56.7% (24 h. 99mTc-MDP study presented 91.1% (0 h to P and 87.2% (24 h, and radioautography showed 67.9% (0 h and 67.4% (24 h. The binding to BC was 8.9% (0 h and 12.8% (24 h, and radioautography showed 32.1% (0 h and 32.6% (24 h. 99mTc-GHA study was 90.1% (0 h to P and 79.9% (24 h, and radioautography showed 67.2% (0 h and 60.1% (24 h. The binding to BC was 9.9% (0 h and 20.1% (24 h, and radioautography showed 32.8% (0 h and 39.9% (24 h. The comparison of the obtained results suggests that the binding to plasma and blood cells in the two techniques used (radioautography and centrifugation is qualitatively in accordance

  15. Convergence study of global meshing on enamel-cement-bracket finite element model

    Science.gov (United States)

    Samshuri, S. F.; Daud, R.; Rojan, M. A.; Basaruddin, K. S.; Abdullah, A. B.; Ariffin, A. K.

    2017-09-01

    This paper presents on meshing convergence analysis of finite element (FE) model to simulate enamel-cement-bracket fracture. Three different materials used in this study involving interface fracture are concerned. Complex behavior ofinterface fracture due to stress concentration is the reason to have a well-constructed meshing strategy. In FE analysis, meshing size is a critical factor that influenced the accuracy and computational time of analysis. The convergence study meshing scheme involving critical area (CA) and non-critical area (NCA) to ensure an optimum meshing sizes are acquired for this FE model. For NCA meshing, the area of interest are at the back of enamel, bracket ligature groove and bracket wing. For CA meshing, area of interest are enamel area close to cement layer, the cement layer and bracket base. The value of constant NCA meshing tested are meshing size 1 and 0.4. The value constant CA meshing tested are 0.4 and 0.1. Manipulative variables are randomly selected and must abide the rule of NCA must be higher than CA. This study employed first principle stresses due to brittle failure nature of the materials used. Best meshing size are selected according to convergence error analysis. Results show that, constant CA are more stable compare to constant NCA meshing. Then, 0.05 constant CA meshing are tested to test the accuracy of smaller meshing. However, unpromising result obtained as the errors are increasing. Thus, constant CA 0.1 with NCA mesh of 0.15 until 0.3 are the most stable meshing as the error in this region are lowest. Convergence test was conducted on three selected coarse, medium and fine meshes at the range of NCA mesh of 0.15 until 3 and CA mesh area stay constant at 0.1. The result shows that, at coarse mesh 0.3, the error are 0.0003% compare to 3% acceptable error. Hence, the global meshing are converge as the meshing size at CA 0.1 and NCA 0.15 for this model.

  16. Source rock identification of sediments using trace element ratios and 13C isotope data - a case study from Pondicherry region

    International Nuclear Information System (INIS)

    Tirumalesh, K.; Kulkarni, U.P.; Singh, Gursharan; Ramakumar, K.L.; Chidambaram, S.

    2012-01-01

    Compositional characteristics of source rocks are generally well recorded in sedimentary deposits and provide valuable information about nature of source rocks even though weathering, physical sorting and deposition environment influence the sediment geochemistry. In this paper we report major, trace element and 13 C isotope data of cutting samples collected from Quaternary, Tertiary and Cretaceous formations in Pondicherry area. The distribution patterns and inter elemental correlations are used to identify source rock composition and carbon isotope compositions to understand the sediment deposition conditions. Mineralogy of the bulk sediment indicates presence of Quartz, K-feldspar, Calcite, Mg-calcite, Aragonite and Clay minerals. Compared to upper continental crust values most of these sediments show lower concentration of all elements except Ca and Zn at some depths. The depletion is probably associated with weathering of feldspar and removal of elements through solution. This also increases the proportion of quartz relative to source rock. The ratios of redox sensitive elements (Th/U) infer oxic weathering in shallow sediments. Elemental ratios (La/Sc, Th/Sc, Th/Cr, Th/Co) and ternary plots (La-Th-Sc and Th-Hf-Co) indicate contribution of felsic source rocks with varying degree of weathering. These plots also infer the inherent heterogeneity in the source rocks. Hafnium correlations with other trace elements suggest contribution of Tonalitic rocks in addition to granite to these sediments. The geochemical characteristics of the sediments are found to be similar to that of sediments belonging to similar geology in nearby regions. Presence of shallow marine condition during the sedimentation is inferred from the detrital index (DI) values, which is further supported by the presence of fibrous clay minerals in ESEM scans. This study also brings out the utility of δ 13 C information to reinforce the geochemical and mineralogical inferences. (author)

  17. Dielectric response of arbitrary-shaped clusters studied by the finite element method

    Czech Academy of Sciences Publication Activity Database

    Rychetský, Ivan; Klíč, Antonín

    2012-01-01

    Roč. 427, č. 1 (2012), s. 143-147 ISSN 0015-0193 R&D Projects: GA ČR GA202/09/0430 Institutional research plan: CEZ:AV0Z10100520 Keywords : effective permittivity * two-component composite * integral representation * finite element analysis Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.415, year: 2012

  18. Tracer element studies on deep water formation and circulation in the European Artic Sea

    International Nuclear Information System (INIS)

    Boenisch, G.

    1991-01-01

    Tracer element investigations (tritium, helium 3, carbon 14, argon 39, krypton 85 and fluorohydrocarbons) were carried out in the European Arctic Sea. The findings are discussed with a view to their validity in the case of deep water formation and circulation. The data cover the period of 1972 through 1989. (BBR) [de

  19. A study of relationship of element contents in human hair with some respiratory system diseases

    International Nuclear Information System (INIS)

    Hou Xiaolin; Wu Lanlan; Yuan Ling; Huang Liyun; Jia Zhanxiang; Chen Yang

    1994-01-01

    19 elements, such as Ca, Mg, Fe, Se, Cu, Zn, etc., in hair of 65 patients with chronic bronchitis, pulmonary emphysema and cor-pulmonale diseases and 65 healthy people have been investigated by instrumental neutron activation analysis. The results show that the contents of Ca and Mg are lower and Fe, As and Co are higher in the hair of patients than in healthy persons. The contents of Ca and Mg are lower and Fe is higher in the hair of patients during attack periods of chronic bronchitis than in relaxed periods. The differences are significant (P<0.05-0.01). The content of Ca is closely related to that of Mg in hair (P<0.01). The contents of inorganic elements in the Chinese medicine cough and asthma capsule used to treat chronic bronchitis have been determined. The results show that the contents of elements Ca, Mg, Sr, etc., are higher in this medicine than the average amounts of these elements in 120 other Chinese medicines. (author) 15 refs.; 8 tabs

  20. Comparative studies of elemental composition in leaves and flowers of Catharanthus roseus growing in Bangladesh

    Directory of Open Access Journals (Sweden)

    Shahin Aziz

    2016-01-01

    Conclusions: The elemental composition in both leaves and flowers of C. roseus were found to be different. Therefore, different parts of this medicinal plant are enriched in some micro and macro nutrients like Fe, Ca, Na, K, Zn, which are very important for biological metabolic system as well as human health.

  1. Application of ICP-MS to a trace elements mass balance study in a power plant

    NARCIS (Netherlands)

    Bettinelli, M.; Spezia, S.; Fiore, A.; Pastorelli, N.; Terni, C.; Holland, G.; Tanner, S.D.

    2001-01-01

    The distributions of seven trace elements in a power plant are detd. in 3 fuels (Orimulsion, coal, and fuel oil) and output flows, i.e., ash, wastewater, gypsum, and emulsions by using ICP-MS. The power plant is equipped with sulfur oxide and nitrogen oxide removal facilities. [on SciFinder (R)

  2. Study on element concentrations in aerosol in ambient air from Phnom Penh, Cambodia

    International Nuclear Information System (INIS)

    Kashima, Yuji; Sakai, Haruya; Matsui, Mitsuaki

    2004-01-01

    In order to accumulate basic information necessary for reduction of suspended particle materials (SPM) in Phnom Penh, various element concentrations were measured with ICP-mass spectrometry and neutron activation analysis, and some their sources were estimated. SPM were collected at a roadside area in the middle of the City (1 point, 11 samples of 24 hours and 14 samples of 7 ∼ 16 hours) and two residence areas (2 points, 13 samples of 24 hours and 1 sample of 16 hours) with membrane filters of air samplers set at the level of 8∼9 m height. For research SPM sources, two kinds of comparative samples were also collected from roadside dust and soil (2 points, 9 samples) and from exhaust deposit of vehicles (bicycle 11, gasoline automobile 7, diesel car 10 samples) and electric generator (6 samples). SPM concentrations measured were 67∼1,000 μg/m 3 (average 410 μg/m 3 ). The concentrations in the roadside area were several times higher than in the residence area. Toxic element concentrations were all higher in roadside with an exception of Cd. The concentrations of Pb was 44 ng/m 3 on the average, amounting to 1/10 of WHO Guidelines. Comparing element concentrations of SPM with those of the soils and deposits, factor analysis using 18 elements including Ba, V, Pb suggests three major sources of soil, vehicle exhaust, and oil burning. (H. Yokoo)

  3. Studies on the sediments of Vembanad lake, Kerala state. 4. Distribution of trace elements

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, P.S.N.; Veerayya, M.

    in the estuarine region has been attributed to several factors. The impoverishment of Mn and Co can be due to (i) desorption of these elements from the river borne detritus on coming into contact with saline waters, (ii) dredging operations which may lead...

  4. Energy-dispersive X-ray fluorescence study of elemental uptake in ...

    Indian Academy of Sciences (India)

    approach in the EDXRF analysis technique, investigation has been made to characterize the elemental ... plastics were removed, and then the samples were dried in an oven at 105. ◦. C. Two parts ... the environment clean and dry. .... The authors are grateful to the West Bengal Pollution Control Board (WBPCB) for its.

  5. An isotope trace element study of the East Greenland Tertiary dyke swarm

    DEFF Research Database (Denmark)

    Hanghøj, Karen; Storey, Michael; Stecher, Ole

    2003-01-01

    Dykes of the East Greenland Tertiary dyke swarm can be divided into pre- and syn-break-up tholeiitic dykes, and post-break-up transitional dykes. Of the pre- and syn-break-up dykes, the most abundant group (Tholeiitic Series; TS) has major element compositions similar to the main part of the East...

  6. Study of Core Competency Elements and Factors Affecting Performance Efficiency of Government Teachers in Northeastern Thailand

    Science.gov (United States)

    Chansirisira, Pacharawit

    2012-01-01

    The research aimed to investigate the core competency elements and the factors affecting the performance efficiency of the civil service teachers in the northeastern region, Thailand. The research procedure consisted of two steps. In the first step, the data were collected using a questionnaire with the reliability (Cronbach's Alpha) of 0.90. The…

  7. Trace elements in human milk. Part of a coordinated programme on comparative methods for the study of trace elements in human nutrition

    International Nuclear Information System (INIS)

    Kosta, L.

    1981-01-01

    New analytical methods based on radiochemical neutron activation analysis were developed for the determination of Sn, V, I and Se at nanogram levels in biological materials, particularly in milk and other foodstuffs. By the application of these and similar methods, results for trace elements in human and cow's milk were collected from which the normal concentration ranges of up to 12 trace elements were established. Significant data on vanadium levels were also collected allowing assessment of the dietary intake and body pool of this element and a reappraisal of its significance in nutrition. Similar data on a smaller scale were also collected for tin. Results were also obtained for several different trace elements in a range of biological reference materials

  8. Temporal and spatial trends studied by lichen analysis: atmospheric deposition of trace elements in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Aspiazu, J.; Cervantes, L.; Ramirez, J.; Lopez, J.; Villasenor, P. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Ramos, R.; Munoz, R. [Secretaria del Medio Ambiente, Gestion Ambiental del Aire, Mexico City (Mexico)

    2007-07-01

    Ball moss on Tillandsia recurvata (Bromeliaceae), collected in an area previously identified as unpolluted, was transplanted to thirteen bio-monitoring sites in the downtown and metropolitan areas of Mexico City (which cover a surface of 9,560 km{sup 2}) during the periods August 2002 - January 2003 and July 2003 - October 2003. A total of 52 lichens (weighing 300 g) were transplanted to each place. Two were analysed as zero or reference, El Chico National Park, a location 100 Km upwind from the city and the remaining 26 were hung in nylon net bags in order to be able to collect two transplanted tree month, out of every season over a one-year period. The concentrations were measured by the quantitative PIXE method based on an extemal beam facility. The atmospheric deposition for trace elements was inferred by its concentration in lichen samples collected in 2002 from 13 sites in Mexico and compared with data from a similar survey in 2003. The concentration of Cr, Cu, Co, Fe, Mn, Ni, Pb and Zn and other elements was determined for each sample. Maps for each element were drawn after a geostatistical estimate of the metal concentration in the sample was made. Maps were drawn for all elements with the estimated values. Geographical distribution patterns were obtained for the different metals, reflecting the contribution of natural and anthropogenic emission sources. The deposition patterns of V, As, Se, Cd and Pb are substantially influenced by long-range transport from other parts of Mexico City. For Cr, Fe, Co, Ni, and Cu, the deposition patterns are largely determined by contribution from point sources within Mexico and in the metropolitan area. The lichen data for Br and, in part, Se reflect an airborne supply from the environment. Contributions to trace element concentrations in lichen sources other than atmospheric deposition are identified and discussed. The Spatial and temporal variations in the distribution of metal concentration are discussed. (Author)

  9. Temporal and spatial trends studied by lichen analysis: atmospheric deposition of trace elements in Mexico

    International Nuclear Information System (INIS)

    Aspiazu, J.; Cervantes, L.; Ramirez, J.; Lopez, J.; Villasenor, P.; Ramos, R.; Munoz, R.

    2007-01-01

    Ball moss on Tillandsia recurvata (Bromeliaceae), collected in an area previously identified as unpolluted, was transplanted to thirteen bio-monitoring sites in the downtown and metropolitan areas of Mexico City (which cover a surface of 9,560 km 2 ) during the periods August 2002 - January 2003 and July 2003 - October 2003. A total of 52 lichens (weighing 300 g) were transplanted to each place. Two were analysed as zero or reference, El Chico National Park, a location 100 Km upwind from the city and the remaining 26 were hung in nylon net bags in order to be able to collect two transplanted tree month, out of every season over a one-year period. The concentrations were measured by the quantitative PIXE method based on an extemal beam facility. The atmospheric deposition for trace elements was inferred by its concentration in lichen samples collected in 2002 from 13 sites in Mexico and compared with data from a similar survey in 2003. The concentration of Cr, Cu, Co, Fe, Mn, Ni, Pb and Zn and other elements was determined for each sample. Maps for each element were drawn after a geostatistical estimate of the metal concentration in the sample was made. Maps were drawn for all elements with the estimated values. Geographical distribution patterns were obtained for the different metals, reflecting the contribution of natural and anthropogenic emission sources. The deposition patterns of V, As, Se, Cd and Pb are substantially influenced by long-range transport from other parts of Mexico City. For Cr, Fe, Co, Ni, and Cu, the deposition patterns are largely determined by contribution from point sources within Mexico and in the metropolitan area. The lichen data for Br and, in part, Se reflect an airborne supply from the environment. Contributions to trace element concentrations in lichen sources other than atmospheric deposition are identified and discussed. The Spatial and temporal variations in the distribution of metal concentration are discussed. (Author)

  10. CT Image Contrast of High-Z Elements: Phantom Imaging Studies and Clinical Implications.

    Science.gov (United States)

    FitzGerald, Paul F; Colborn, Robert E; Edic, Peter M; Lambert, Jack W; Torres, Andrew S; Bonitatibus, Peter J; Yeh, Benjamin M

    2016-03-01

    To quantify the computed tomographic (CT) image contrast produced by potentially useful contrast material elements in clinically relevant imaging conditions. Equal mass concentrations (grams of active element per milliliter of solution) of seven radiodense elements, including iodine, barium, gadolinium, tantalum, ytterbium, gold, and bismuth, were formulated as compounds in aqueous solutions. The compounds were chosen such that the active element dominated the x-ray attenuation of the solution. The solutions were imaged within a modified 32-cm CT dose index phantom at 80, 100, 120, and 140 kVp at CT. To simulate larger body sizes, 0.2-, 0.5-, and 1.0-mm-thick copper filters were applied. CT image contrast was measured and corrected for measured concentrations and presence of chlorine in some compounds. Each element tested provided higher image contrast than iodine at some tube potential levels. Over the range of tube potentials that are clinically practical for average-sized and larger adults-that is, 100 kVp and higher-barium, gadolinium, ytterbium, and tantalum provided consistently increased image contrast compared with iodine, respectively demonstrating 39%, 56%, 34%, and 24% increases at 100 kVp; 39%, 66%, 53%, and 46% increases at 120 kVp; and 40%, 72%, 65%, and 60% increases at 140 kVp, with no added x-ray filter. The consistently high image contrast produced with 100-140 kVp by tantalum compared with bismuth and iodine at equal mass concentration suggests that tantalum could potentially be favorable for use as a clinical CT contrast agent.

  11. Studies on concentration of minor stable elements in marine environmental samples

    International Nuclear Information System (INIS)

    Suzuki, Hamaji; Ishii, Toshiaki; Iimura, Mitsue; Koyanagi, Taku

    1978-01-01

    Information on the physico-chemical state and quantity of stable elements in marine environments is frequently required to analyze the radioecological behavior of radionuclides released from nuclear facilities into the sea. In this work, determination of stable Mn, Fe, Co, Zn, Zr, Rb, Cs and some rare earth elements (Ce, Eu, Tb, Yb and Lu) in seawater and marine organisms was carried out and the concentration factors were estimated. Seawater and marine organisms were collected on the seashore of Ibaraki Prefecture and analysed by means of neutron activation analysis or atomic absorption spectrometry depending on the elements or samples. Average concentration factors of the rare earth elements by marine organisms are estimated as 3 x 10 1 : muscle of fish, 5 x 10 2 : soft part of clams, and 2 x 10 2 : algae, respectively. Concentration factors by muscle of fishes were 10 3 : Fe, 2 x 10 2 : Co, 5 x 10 2 : Zn, and 5 x 10 1 : Cs, and those by soft part of shellfishes were 10 4 : Fe, 10 3 : Co, 2 x 10 3 : Zn, and 10 1 : Cs, whereas those by algae were 2 x 10 4 : Fe, 5 x 10 2 : Co, 10 3 : Zn, and 3 x 10 1 : Cs, respectively. The high concentration factors for numerous stable elements by shellfishes and algae suggested their suitabilities to the indicator organisms for monitoring of marine pollution by these heavy metals and corresponding radioisotopes and also their significant contribution to the internal radiation exposure to man as radioactive seafoods. (author)

  12. Common data elements collected among universities for sport-related concussion studies.

    Science.gov (United States)

    Yang, Jingzhen; Peek-Asa, Corinne; Noble, James M; Torner, James; Schmidt, Paul; Cooper, Martha L

    2018-02-12

    Universities are increasingly implementing programs to effectively respond to and manage sport-related concussions (SRCs). One such effort is to develop common data elements (CDEs) and standardize data collection methods. The objectives of this study were to describe CDEs currently collected by Big Ten and Ivy League universities for SRC studies, and to compare the data collected with the core CDEs recommended by the National Institute of Neurological Disorders and Stroke (NINDS). We conducted an anonymous cross-sectional online survey among medical staff at the 14 Big Ten and 8 Ivy League universities (one per university) between September and October 2015. The survey instrument, including 9 questions corresponding to the concussion data collected before, during, and after a concussion, was developed and pilot-tested before field use. We analyzed patterns of the concussion CDEs being collected, including when, what, and how the data were collected and stored, and compared them with the NINDS' recommended core CDEs. A total of 19 out of 22 universities were included, with 13 from Big Ten and 6 from Ivy-League universities. All 19 participating universities currently collected concussion data with athletes before, during, and after a concussion. Great similarities in data collection were observed at baseline and acutely post-concussion across participating universities. All 19 universities collected at least one of the ten recommended acute symptoms checklists, and 18 universities collected one of the four recommended core neuropsychological function cognitive measures. However, CDEs in the sub-acute and chronic timeframes were limited, with only 9 (47%) universities collecting post-concussion short to long term outcome data. While over 60% of universities collected and stored concussion data electronically, only 17% to 42% of data collected were readily available for research. Significant inter-institutional similarities in acute concussion CDEs were found. Further

  13. The Effect of Loading Rate on Hydraulic Fracturing in Synthetic Granite - a Discrete Element Study

    Science.gov (United States)

    Tomac, I.; Gutierrez, M.

    2015-12-01

    Hydraulic fracture initiation and propagation from a borehole in hard synthetic rock is modeled using the two dimensional Discrete Element Method (DEM). DEM uses previously established procedure for modeling the strength and deformation parameters of quasi-brittle rocks with the Bonded Particle Model (Itasca, 2004). A series of simulations of laboratory tests on granite in DEM serve as a reference for synthetic rock behavior. Fracturing is enabled by breaking parallel bonds between DEM particles as a result of the local stress state. Subsequent bond breakage induces fracture propagation during a time-stepping procedure. Hydraulic fracturing occurs when pressurized fluid induces hoop stresses around the wellbore which cause rock fracturing and serves for geo-reservoir permeability enhancement in oil, gas and geothermal industries. In DEM, a network of fluid pipes and reservoirs is used for mathematical calculation of fluid flow through narrow channels between DEM particles, where the hydro-mechanical coupling is fully enabled. The fluid flow calculation is superimposed with DEM stress-strain calculation at each time step. As a result, the fluid pressures during borehole pressurization in hydraulic fracturing, as well as, during the fracture propagation from the borehole, can be simulated. The objective of this study is to investigate numerically a hypothesis that fluid pressurization rate, or the fluid flow rate, influences upon character, shape and velocity of fracture propagation in rock. The second objective is to better understand and define constraints which are important for successful fracture propagation in quasi-brittle rock from the perspective of flow rate, fluid density, viscosity and compressibility relative to the rock physical properties. Results from this study indicate that not only too high fluid flow rates cause fracture arrest and multiple fracture branching from the borehole, but also that the relative compressibility of fracturing fluid and

  14. Utilization of Neutron Activation Analysis for geochemical study of major and trace elements in Bouregreg river basin (Morocco)

    International Nuclear Information System (INIS)

    Bounouira, H.; Bounakhla, M.; Embarch, K.; Choukri, A.; Cherkaoui, R.; Gaudry, A.; Treuil, M.; Chakiri, S.

    2010-01-01

    The Bouregreg river basin is located in the moroccan central massif which consists mainly of palaeozoic formations that were subject to the Hercynian orogeny. This study documents the backround geochemistry and hydrochemistry of the Bouregreg river basin, focusing on the distribution of major and trace elements, Rock samples were collected at 9 locations along the bouregreg river and its tributaries in the winter of 2005. Major (Al, fe, Mn, Na, K and Ti) and trace (Rb, Cs, Sr, Sc, Ba, Cr, V, Co, Ni, Zn, As, Sb, La, Ce, Nd, Sm, Tb, Dy, Yb, Lu, Hf, Ta, Mo, Th and U) elements were anlysed using instrumental Neutron Activation Analysis (INAA). Data show that most of the geochemistry and hydrochemistry are related to regional and local geology. the geochemical heritage of geological environment in the Bouregreg river basin is very important, that results from the more compatible behaviour and the inertia of some elements during the weathering (3d transition elements (Co, Ni, Cr,...), interne transition elements f (lanthanides, Zr, Hf, Nb, Ta,...)). The geochemical homogeneity of the basin shows also heritage during the crustal accretion (magmatism-metamorphism-sedimention) and the typology of this continental area is the same that the Upper Continental Crust (UCC). Some anomalously high heavy metal analyses, particulary for As and Sb, may be related to anthropogenic activities

  15. Study of Z > 18 elements concentration in tree rings from surroundings forests of the Mexico Valley using external beam PIXE

    International Nuclear Information System (INIS)

    Calva-Vazquez, G.; Razo-Angel, G.; Rodriguez-Fernandez, L.; Ruvalcaba-Sil, J.L.

    2006-01-01

    The concentration of elements with Z > 18 is measured in tree rings from forests at the surroundings of the Mexico Valley: El Chico National Park (ECP) and Desierto de los Leones National Park (DLP). The analysis was done by simultaneous PIXE-RBS using an external proton beam on tree rings of Pine and Sacred fir (species Pinus montezumae and Abies religiosa, respectively). This study provides information about the elemental concentration in trees of those parks during the years from 1965 to 2003. Typical elements such as K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Sr and Pb were detected using PIXE technique while the wood matrix composition (mainly C and O) was determined by RBS. In general, elemental contents present large variations but concentrations oscillate around the mean value during this period of time. Nevertheless, the measurements showed some trends for Fe and Zn in the tree-rings elemental composition that may be correlated to recent volcanic activities in the region. The low Mn contents indicate soil acidification in DLP from 1968 and the forest decline in ECP during the last 15 years

  16. Atomic adsorption on graphene with a single vacancy: systematic DFT study through the periodic table of elements

    Science.gov (United States)

    Pašti, Igor A.; Jovanović, Aleksandar; Dobrota, Ana S.; Mentus, Slavko V.; Johansson, Börje; Skorodumova, Natalia V.

    Vacancies in graphene present sites of altered chemical reactivity and open possibilities to tune graphene properties by defect engineering. The understanding of chemical reactivity of such defects is essential for successful implementation of carbon materials in advanced technologies. We report the results of a systematic DFT study of atomic adsorption on graphene with a single vacancy for the elements of rows 1 to 6 of the Periodic Table of Elements (PTE), excluding lanthanides. The calculations have been performed using PBE, long-range dispersion interaction-corrected PBE (PBE+D2 and PBE+D3) and non-local vdW-DF2 functional. We find that most elements strongly bind to the vacancy, except for the elements of groups 11 and 12, and noble gases, for which the contribution of dispersion interaction to bonding is most significant. The strength of the interaction with the vacancy correlates with the cohesive energy of the elements in their stable phases: the higher the cohesive energy is the stronger bonding to the vacancy can be expected. As most atoms can be trapped at the SV site we have calculated the potentials of dissolution and found that in most cases the metals adsorbed at the vacancy are more "noble" than they are in their corresponding stable phases.

  17. Studies on the numerical solution of three-dimensional stationary diffusion equations using the finite element method

    International Nuclear Information System (INIS)

    Franke, H.P.

    1976-05-01

    The finite element method is applied to the solution of the stationary 3D group diffusion equations. For this, a programme system with the name of FEM3D is established which also includes a module for semi-automatic mesh generation. Tetrahedral finite elements are used. The neutron fluxes are described by complete first- or second-order Lagrangian polynomials. General homogeneous boundary conditions are allowed. The studies show that realistic three-dimensional problems can be solved at less expense by iterative methods, in particular so when especially adapted matrix handling and storage schemes are used efficiently. (orig./RW) [de

  18. Studies on elemental analysis of widely consumed traditional herbs in Libya by ko instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Abugassa, I. O.; Abunawael, M. E.

    2012-12-01

    Herbs are accepted as an alternative medicine for specific treatment of illness of among different ethnic groups worldwide. It is vital to know the contents of these herbs used in Libya were analysed by k-0 instrumental neutron activation analysis. A total of 32 trace and major elements (Ag, As, Au, Ba, Br, Ca, Ce, Co, Cr, Cs, Eu, Fe, Hf, Hg, K, La, Mo, Na, Nd, Rb, Sb, Sc, Se, Sm, Sr, Tb, Th, Tm, U, Yb and Zn) were determined. The concentration of elements varied depending on the origin of the herb. The study showed that the toxic elements found in the samples were below the levels prescribed by health regulations. The method was justified by analyzing two SRM. All the results are in good agreement with the certified values. (Author)

  19. Comparative Study of Elemental Nutrients in Organic and Conventional Vegetables Using Laser-Induced Breakdown Spectroscopy (LIBS).

    Science.gov (United States)

    Bhatt, Chet R; Alfarraj, Bader; Ghany, Charles T; Yueh, Fang Y; Singh, Jagdish P

    2017-04-01

    In this study, the laser-induced breakdown spectroscopy (LIBS) technique was used to identify and compare the presence of major nutrient elements in organic and conventional vegetables. Different parts of cauliflowers and broccolis were used as working samples. Laser-induced breakdown spectra from these samples were acquired at optimum values of laser energy, gate delay, and gate width. Both univariate and multivariate analyses were performed for the comparison of these organic and conventional vegetable flowers. Principal component analysis (PCA) was taken into account for multivariate analysis while for univariate analysis, the intensity of selected atomic lines of different elements and their intensity ratio with some reference lines of organic cauliflower and broccoli samples were compared with those of conventional ones. In addition, different parts of the cauliflower and broccoli were compared in terms of intensity and intensity ratio of elemental lines.

  20. Atmospheric deposition of trace elements around Ulan Bator city studied by moss and lichen biomonitoring technique and INAA

    International Nuclear Information System (INIS)

    Ganbold, G.; Gehrbish, Sh.; Tsehndehehkhuu, Ts.; Gundorina, S.F.; Frontas'eva, M.V.; Ostrovnaya, T.M.; Pavlov, S.S.

    2005-01-01

    For the first time the moss and lichen biomonitoring technique has been applied to air pollution in Mongolia (Ulan-Bator, the capital city). INAA at the IBR-2 reactor has made it possible to determine the content of 35 elements in moss and lichen biomonitors. Samples collected at sites located 10-15 km from the center of Ulan-Bator were analyzed by Instrumental Neutron Activation Analysis (INAA) using epithermal neutrons. The mosses (Rhytidium rugosum, Thuidium abietinum, Entodon concinnus) and lichens (Cladonia stellaris, Parmelia separata) were used to study the atmospheric deposition of trace elements. It was shown that the suggested types of mosses could be used as suitable biomonitors to estimate the concentration levels of heavy metals and trace elements in Ulan-Bator atmospheric deposition. The results are compared to the data of atmospheric deposition of some European countries

  1. Atmospheric Deposition of Trace Elements Around Ulan-Bator City Studied by Moss and Lichen Biomonitoring Technique and INAA

    CERN Document Server

    Ganbold, G; Gundorina, S F; Frontasyeva, M V; Ostrovnaya, T M; Pavlov, S S; Tsendeekhuu, T

    2005-01-01

    For the first time the moss and lichen biomonitoring technique has been applied to air pollution in Mongolia (Ulan-Bator, the capital city). INAA at the IBR-2 reactor has made it possible to determine the content of 35 elements in moss and lichen biomonitors. Samples collected at sites located 10-15 km from the center of Ulan-Bator were analyzed by Instrumental Neutron Activation Analysis (INAA) using epithermal neutrons. The mosses (\\textit{Rhytidium rugosum}, \\textit{Thuidium abietinum}, \\textit{Entodon concinnus}) and lichens (\\textit{Cladonia stellaris}, \\textit{Parmelia separata}) were used to study the atmospheric deposition of trace elements. It was shown that the suggested types of mosses could be used as suitable biomonitors to estimate the concentration levels of heavy metals and trace elements in Ulan-Bator atmospheric deposition. The results are compared to the data of atmospheric deposition of some European countries.

  2. Study of the analytical method based on charged particle excitation of elements and detection on the characteristic X-rays

    International Nuclear Information System (INIS)

    Poncet, Maryse; Engelmann, Charles

    1975-01-01

    Preliminary results obtained by bombarding thick or thin targets with protons of energies below 1.5 MeV are presented. In the former case, curves representing X-ray emission versus proton energy (between 0.4 and 1.4MeV) were determined for 12 elements (Al, Ti, V, Fe, Ni, Cu, Nb, Ag, Sn, W, Au, Pb). From these curves the variation in detection sensitivity with atomic number for a given energy was derived. For some elements (Cu, Ag, Sn, Pb), deposited in thin layers on a aluminium substrate, the X-ray emission was studied as a function of thickness at constant energy. The results show that the method may be used to determine elements of atomic number near 30, in thin layers at least 200μg.cm -2 thick, with a detection limit which could reach a few 10 -3 μg.cm -2 [fr

  3. First-principles study on the effect of alloying elements on the elastic deformation response in β-titanium alloys

    International Nuclear Information System (INIS)

    Gouda, Mohammed K.; Gepreel, Mohamed A. H.; Nakamura, Koichi

    2015-01-01

    Theoretical deformation response of hypothetical β-titanium alloys was investigated using first-principles calculation technique under periodic boundary conditions. Simulation was carried out on hypothetical 54-atom supercell of Ti–X (X = Cr, Mn, Fe, Zr, Nb, Mo, Al, and Sn) binary alloys. The results showed that the strength of Ti increases by alloying, except for Cr. The most effective alloying elements are Nb, Zr, and Mo in the current simulation. The mechanism of bond breaking was revealed by studying the local structure around the alloying element atom with respect to volume change. Moreover, the effect of alloying elements on bulk modulus and admissible strain was investigated. It was found that Zr, Nb, and Mo have a significant effect to enhance the admissible strain of Ti without change in bulk modulus

  4. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method

    DEFF Research Database (Denmark)

    Feng, Huan; Pettinari, Matteo; Stang, Henrik

    2015-01-01

    In this paper, the viscoelastic behavior of asphalt mixture was studied by using discrete element method. The dynamic properties of asphalt mixture were captured by implementing Burger’s contact model. Different ways of taking into account of the normal and shear material properties of asphalt mi...

  5. Study on performance of a simultaneous spectrometer of ICP emission source for the determination of the major elements in rocks

    International Nuclear Information System (INIS)

    Vieira, M.D.

    1987-01-01

    The optimization of operational parameters of a simultaneous spectrometer coupled to an ICP excitation source in order to establish an analytical method for the simultaneous determination of the major elements in rocks is studied. The mutual spectral interferences, calibration curves for the acid and saline matrix and the internal standard method with ytrium are analyzed. (M.J.C.) [pt

  6. 3D element imaging using NSECT for the detection of renal cancer: a simulation study in MCNP

    Science.gov (United States)

    Viana, R. S.; Agasthya, G. A.; Yoriyaz, H.; Kapadia, A. J.

    2013-09-01

    This work describes a simulation study investigating the application of neutron stimulated emission computed tomography (NSECT) for noninvasive 3D imaging of renal cancer in vivo. Using MCNP5 simulations, we describe a method of diagnosing renal cancer in the body by mapping the 3D distribution of elements present in tumors using the NSECT technique. A human phantom containing the kidneys and other major organs was modeled in MCNP5. The element composition of each organ was based on values reported in literature. The two kidneys were modeled to contain elements reported in renal cell carcinoma (RCC) and healthy kidney tissue. Simulated NSECT scans were executed to determine the 3D element distribution of the phantom body. Elements specific to RCC and healthy kidney tissue were then analyzed to identify the locations of the diseased and healthy kidneys and generate tomographic images of the tumor. The extent of the RCC lesion inside the kidney was determined using 3D volume rendering. A similar procedure was used to generate images of each individual organ in the body. Six isotopes were studied in this work—32S, 12C, 23Na, 14N, 31P and 39K. The results demonstrated that through a single NSECT scan performed in vivo, it is possible to identify the location of the kidneys and other organs within the body, determine the extent of the tumor within the organ, and to quantify the differences between cancer and healthy tissue-related isotopes with p ≤ 0.05. All of the images demonstrated appropriate concentration changes between the organs, with some discrepancy observed in 31P, 39K and 23Na. The discrepancies were likely due to the low concentration of the elements in the tissue that were below the current detection sensitivity of the NSECT technique.

  7. 3D element imaging using NSECT for the detection of renal cancer: a simulation study in MCNP.

    Science.gov (United States)

    Viana, R S; Agasthya, G A; Yoriyaz, H; Kapadia, A J

    2013-09-07

    This work describes a simulation study investigating the application of neutron stimulated emission computed tomography (NSECT) for noninvasive 3D imaging of renal cancer in vivo. Using MCNP5 simulations, we describe a method of diagnosing renal cancer in the body by mapping the 3D distribution of elements present in tumors using the NSECT technique. A human phantom containing the kidneys and other major organs was modeled in MCNP5. The element composition of each organ was based on values reported in literature. The two kidneys were modeled to contain elements reported in renal cell carcinoma (RCC) and healthy kidney tissue. Simulated NSECT scans were executed to determine the 3D element distribution of the phantom body. Elements specific to RCC and healthy kidney tissue were then analyzed to identify the locations of the diseased and healthy kidneys and generate tomographic images of the tumor. The extent of the RCC lesion inside the kidney was determined using 3D volume rendering. A similar procedure was used to generate images of each individual organ in the body. Six isotopes were studied in this work - (32)S, (12)C, (23)Na, (14)N, (31)P and (39)K. The results demonstrated that through a single NSECT scan performed in vivo, it is possible to identify the location of the kidneys and other organs within the body, determine the extent of the tumor within the organ, and to quantify the differences between cancer and healthy tissue-related isotopes with p ≤ 0.05. All of the images demonstrated appropriate concentration changes between the organs, with some discrepancy observed in (31)P, (39)K and (23)Na. The discrepancies were likely due to the low concentration of the elements in the tissue that were below the current detection sensitivity of the NSECT technique.

  8. Effect of restoration volume on stresses in a mandibular molar: a finite element study.

    Science.gov (United States)

    Wayne, Jennifer S; Chande, Ruchi; Porter, H Christian; Janus, Charles

    2014-10-01

    There can be significant disagreement among dentists when planning treatment for a tooth with a failing medium-to-large--sized restoration. The clinician must determine whether the restoration should be replaced or treated with a crown, which covers and protects the remaining weakened tooth structure during function. The purpose of this study was to evaluate the stresses generated in different sized amalgam restorations via a computational modeling approach and reveal whether a predictable pattern emerges. A computer tomography scan was performed of an extracted mandibular first molar, and the resulting images were imported into a medical imaging software package for tissue segmentation. The software was used to separate the enamel, dentin, and pulp cavity through density thresholding and surface rendering. These tissue structures then were imported into 3-dimensional computer-aided design software in which material properties appropriate to the tissues in the model were assigned. A static finite element analysis was conducted to investigate the stresses that result from normal occlusal forces. Five models were analyzed, 1 with no restoration and 4 with increasingly larger restoration volume proportions: a normal-sized tooth, a small-sized restoration, 2 medium-sized restorations, and 1 large restoration as determined from bitewing radiographs and occlusal surface digital photographs. The resulting von Mises stresses for dentin-enamel of the loaded portion of the tooth grew progressively greater as the size of the restoration increased. The average stress in the normal, unrestored tooth was 4.13 MPa, whereas the smallest restoration size increased this stress to 5.52 MPa. The largest restoration had a dentin-enamel stress of 6.47 MPa. A linear correlation existed between restoration size and dentin-enamel stress, with an R(2) of 0.97. A larger restoration volume proportion resulted in higher dentin-enamel stresses under static loading. A comparison of the von Mises

  9. Delta phase plutonium and its alloys with III B elements: a microscopic study

    International Nuclear Information System (INIS)

    Bouchet, J.

    2001-01-01

    results for plutonium and IIIB elements alloys are also promising. In addition, to study the properties of low energy, the Gutzwiller approximation is used as a basis for the construction of a 'first principles' calculation scheme for investigating the electronic structure of strongly correlated systems. (author)

  10. Energy Sustainability Evaluation Model Based on the Matter-Element Extension Method: A Case Study of Shandong Province, China

    Directory of Open Access Journals (Sweden)

    Siqi Li

    2017-11-01

    Full Text Available Energy sustainability is of vital importance to regional sustainability, because energy sustainability is closely related to both regional economic growth and social stability. The existing energy sustainability evaluation methods lack a unified system to determine the relevant influencing factors, are relatively weak in quantitative analysis, and do not fully describe the ‘paradoxical’ characteristics of energy sustainability. To solve those problems and to reasonably and objectively evaluate energy sustainability, we propose an energy sustainability evaluation model based on the matter-element extension method. We first select energy sustainability evaluation indexes based on previous research and experience. Then, a variation coefficient method is used to determine the weights of these indexes. Finally, the study establishes the classical domain, joint domain, and the matter-element relationship to evaluate energy sustainability through matter-element extension. Data from Shandong Province is used as a case study to evaluate the region’s energy sustainability. The case study shows that the proposed energy sustainability evaluation model, based on the matter-element extension method, can effectively evaluate regional energy sustainability.

  11. The sensitivity of biological finite element models to the resolution of surface geometry: a case study of crocodilian crania

    Directory of Open Access Journals (Sweden)

    Matthew R. McCurry

    2015-06-01

    Full Text Available The reliability of finite element analysis (FEA in biomechanical investigations depends upon understanding the influence of model assumptions. In producing finite element models, surface mesh resolution is influenced by the resolution of input geometry, and influences the resolution of the ensuing solid mesh used for numerical analysis. Despite a large number of studies incorporating sensitivity studies of the effects of solid mesh resolution there has not yet been any investigation into the effect of surface mesh resolution upon results in a comparative context. Here we use a dataset of crocodile crania to examine the effects of surface resolution on FEA results in a comparative context. Seven high-resolution surface meshes were each down-sampled to varying degrees while keeping the resulting number of solid elements constant. These models were then subjected to bite and shake load cases using finite element analysis. The results show that incremental decreases in surface resolution can result in fluctuations in strain magnitudes, but that it is possible to obtain stable results using lower resolution surface in a comparative FEA study. As surface mesh resolution links input geometry with the resulting solid mesh, the implication of these results is that low resolution input geometry and solid meshes may provide valid results in a comparative context.

  12. Multitracer studies on the effects of model acid rain on the adsorption of trace elements on soils

    International Nuclear Information System (INIS)

    Wang, H.F.; Ambe, S.; Takematsu, N.; Ambe, F.

    2001-01-01

    Using a multitracer technique, the effects of acid rain pH on the adsorption of 15 trace elements on soil were studied. Kaolin, forest soil (original and with partially removed oxides), black soil (original and without organic matter) and Kureha soil (original, with partially removed oxides, and without organic matter) were employed as the adsorbents. Instead of H 2 SO 4 solution, HCl solution was selected as the model acid rain based on the results of adsorption experiments on kaolin. In general, the percentage adsorption of cationic elements on three original soils and kaolin increased with increasing pH. The adsorption of oxyanionic elements, As and Se, on three soils was high over the entire pH range studied, while that on kaolin was low and decreased with an increase in pH. The differences in the physical and chemical properties of soils were reflected on the adsorption. The organic matter in soil had positive effects on the extent of adsorption of most elements studied, while the oxides apparently showed positive effects only for Fe and Se adsorption. The results indicate that acid rain decreases the retention of cations in soil and that it increases or does not change the adsorption of anions. (orig.)

  13. A Study on the Relationship between Design Elements of Outdoor Leisure Spaces and Types of Leisure Activities in Sustainable Community Development - A Case Study on Tainan, Taiwan

    Science.gov (United States)

    Chang, J. H.; Zhang, H.

    2018-01-01

    Sustainable community development encompasses three aspects: “Lifestyle”, “Production” and “Ecology”. Among them, “Lifestyle” is closest to people and reflects basic human needs. Creating outdoor spaces that encourage residents to engage in leisure activities will not only provide them with spiritual sustenance but also fulfil one of the key criteria in sustainable community development. This study explores the relationship between design elements of outdoor leisure spaces and types of leisure activities from residents' perspective with the goal to inform future spatial planning. The study collected 365 valid questionnaires from Tainan residents. Factor analysis was used to extract factors from design elements of outdoor leisure spaces, and regression analysis was applied to understand the effect level. The result shows design elements have positive effect on the types of leisure activities. In addition, different elements exert different influences on the choice of activities.

  14. Modeling of asphalt by means of discrete element method – an initial study

    DEFF Research Database (Denmark)

    Feng, Huan; Hededal, Ole; Stang, Henrik

    of conducting time-consuming and lab-costly procedures. The use of numerical models, capable of reducing greatly the testing cost, has shown great potential in characterizing asphalt-aggregate mixtures for both material evaluation and structural design purposes, [1],[2]. Discrete element method (DEM) is one...... – will be applied. The work presented here will focus on the discrete element method as a tool for modelling composite materials, i.e. determination of a representative volume; boundary conditions; characterisation of the components mastic (binder + filler) and aggregates; and establishment of virtual test samples....... Results from initial tests will be presented and the future development of the model towards characterising asphalt from its composition will be outlined....

  15. Finite element speaker-specific face model generation for the study of speech production.

    Science.gov (United States)

    Bucki, Marek; Nazari, Mohammad Ali; Payan, Yohan

    2010-08-01

    In situations where automatic mesh generation is unsuitable, the finite element (FE) mesh registration technique known as mesh-match-and-repair (MMRep) is an interesting option for quickly creating a subject-specific FE model by fitting a predefined template mesh onto the target organ. The irregular or poor quality elements produced by the elastic deformation are corrected by a 'mesh reparation' procedure ensuring that the desired regularity and quality standards are met. Here, we further extend the MMRep capabilities and demonstrate the possibility of taking into account additional relevant anatomical features. We illustrate this approach with an example of biomechanical model generation of a speaker's face comprising face muscle insertions. While taking advantage of the a priori knowledge about tissues conveyed by the template model, this novel, fast and automatic mesh registration technique makes it possible to achieve greater modelling realism by accurately representing the organ surface as well as inner anatomical or functional structures of interest.

  16. Parametric Study on the Dynamic Heat Storage Capacity of Building Elements

    DEFF Research Database (Denmark)

    Artmann, Nikolai; Manz, H.; Heiselberg, Per

    2007-01-01

    as their interrelation. The potential of increasing thermal mass by using phase change materials (PCM) was estimated assuming increased thermal capacity. The results show a significant impact of the heat transfer coefficient on heat storage capacity, especially for thick, thermally heavy elements. The storage capacity...... of onedimensional heat conduction in a slab with convective boundary condition was applied to quantify the dynamic heat storage capacity of a particular building element. The impact of different parameters, such as slab thickness, material properties and the heat transfer coefficient was investigated, as well......In modern, extensively glazed office buildings, due to high solar and internal loads and increased comfort expectations, air conditioning systems are often used even in moderate and cold climates. Particularly in this case, passive cooling by night-time ventilation seems to offer considerable...

  17. Study of transfer of minor elements during ironmaking by neutron activation analysis

    International Nuclear Information System (INIS)

    Ene, A.; Pantelica, A.

    2010-01-01

    In this work instrumental neutron activation analysis (INAA) was applied to investigate a total of 30 samples of metallurgical raw materials (sinter, pellets, coke) and related finished products (pig iron. slag, blast-furnace flue dust) sampled from the same blast furnace discharge in the iron-making process in the Integrated Iron and Steel Works of Galati (Romania). The transfer efficiencies of minor elements As, Cu, K, Na, V and W from raw materials - iron-bearing components (sinter, pellets) and coke - to pig iron and their losses in slag and flue dust have been determined and a discussion of the behaviour of each element during the blast furnace process was done. (orig.)

  18. A study on the relationship between trace elements and respiratory system diseases

    International Nuclear Information System (INIS)

    Hou Xiaolin; Wu Lanlan; Yuan Ling; Huang Liyun; Jia Zhanxiang; Chen Yang

    1995-01-01

    19 elements (Ca, Mg, Fe, Se, Cu, Zn, etc.) in hair of 65 patients with chronic bronchitis, pulmonary emphysema and corpulmonale and 65 healthy persons were determined with instrumental neutron activation analysis. It was shown that the contents of Ca and Mg are lower while the contents of Fe, As and Co higher for the patients. For the patients with chronic bronchitis in attack period the contents of Ca and Mg are lower and the content of Fe higher than those in relaxed period. A highly positive relation between Ca and Mg contents was also found. In addition, inorganic elements in 'Kechuandeping' capsule, a prepared traditional Chinese medicine to treat chronic bronchitis, were determined, and the contents of Ca, Mg, Sr, etc. were found higher than the corresponding average values for 120 kinds of traditional Chinese medicines, indicating a possible shortage of Ca, Mg, etc. for the patients with respiratory-system diseased

  19. Comparison study between traditional and finite element methods for slopes under heavy rainfall

    Directory of Open Access Journals (Sweden)

    M. Rabie

    2014-08-01

    Moreover, slope stability concerning rainfall and infiltration is analyzed. Specially, two kinds of infiltrations (saturated and unsaturated are considered. Many slopes become saturated during periods of intense rainfall or snowmelt, with the water table rising to the ground surface, and water flowing essentially parallel to the direction of the “slope” and “Influence” of the change in shear strength, density, pore-water pressure and seepage force in soil slices on the slope stability is explained. Finally, it is found that classical limit equilibrium methods are highly conservative compared to the finite element approach. For assessment the factor of safety for slope using the later technique, no assumption needs to be made in advance about the shape or location of the failure surface, slice side forces and their directions. This document outlines the capabilities of the finite element method in the analysis of slope stability problems.

  20. The evolution of complex type B Allende inclusion - An ion microprobe trace element study

    Science.gov (United States)

    Macpherson, Glenn J.; Crozaz, Ghislaine; Lundberg, Laura L.

    1989-01-01

    Results are presented of a detailed trace-element and isotopic analyses of the constituent phases in each of the major textural parts (mantle, core, and islands) of a Type B refractory inclusion, the USNM 5241 inclusion from Allende, first described by El Goresy et al. (1985). The REE data on 5241 were found to be largely consistent with a model in which the mantle and the core of 5241 formed sequentially out of a single melt by fractional crystallization. The numerical models of REE evolution in the 5241 melt, especially that of Eu, require that a significant mass of spinel-free island material was assimilated into the evolving melt during the last half of the solidification history of 5241. The trace element results pbtained thus strongly support the interpretation of El Goresy et al. (1985) that the spinel-free islands in the 5241 are trapped xenoliths.