WorldWideScience

Sample records for traffic engineering developed

  1. Airport Surface Traffic Control Visual Ground Aids Engineering and Development Plan

    Science.gov (United States)

    1977-01-01

    The plan described in this document supports the overall program at the Transportation Systems Center to define, design, develop, and evaluate systems that meet the requirements of airport surface traffic control. This plan is part of documentation s...

  2. Application of Internet in Road Traffic Engineering

    Directory of Open Access Journals (Sweden)

    Ivan Dadić

    2012-10-01

    Full Text Available The paper deals with the implementation of Internet in trafficengineering with the purpose of improving the professionaland scientific research development of the traffic system in theRepublic of Croatia.Fast growth of the world computer network, Internet, andits applications in almost all the fields of human activities,change the picture of the modern world. The current exchangeof data in all their forms and the daily growth of the network,supplemented by almost incredible amounts of data that can bealmost instantly accessible, indicates that Internet is not just theinfomwtion technology revolution, but that it is a revolutionper se. More than 100 million computers are estimated to benetworked beginning of the 21" century.Internet seems almost as if it were created for the purposesof knowledge and expe1ience exchange in traffic, a relativelyyoung scientific branch. 11 can be concluded that the presenceof traffic engineers in Internet is today's reality and tomon·ow'snecessity.

  3. Engineering Consequences of changing Traffic Flows on Minor Rural Roads in a developing Multifunctional European Countryside

    NARCIS (Netherlands)

    Jaarsma, C.F.; Hermans, C.M.L.; Rienks, W.A.; Vries, de J.R.

    2012-01-01

    Multifunctional agriculture (MFA) is a leading catchword in European agricultural policy. This paper aims to investigate expanding traffic flows arising from new activities connected with agricultural business, such as on-farm sales of products, care-farming, and agritourism. These activities put an

  4. Traffic management simulation development.

    Science.gov (United States)

    2011-01-03

    Microscopic simulation can provide significant support to traffic management center (TMC) operations. However, traffic simulation applications require data that are expensive and time-consuming to collect. Data collected by TMCs can be used as a prim...

  5. Traffic engineering and regenerator placement in GMPLS networks with restoration

    Science.gov (United States)

    Yetginer, Emre; Karasan, Ezhan

    2002-07-01

    In this paper we study regenerator placement and traffic engineering of restorable paths in Generalized Multipro-tocol Label Switching (GMPLS) networks. Regenerators are necessary in optical networks due to transmission impairments. We study a network architecture where there are regenerators at selected nodes and we propose two heuristic algorithms for the regenerator placement problem. Performances of these algorithms in terms of required number of regenerators and computational complexity are evaluated. In this network architecture with sparse regeneration, offline computation of working and restoration paths is studied with bandwidth reservation and path rerouting as the restoration scheme. We study two approaches for selecting working and restoration paths from a set of candidate paths and formulate each method as an Integer Linear Programming (ILP) prob-lem. Traffic uncertainty model is developed in order to compare these methods based on their robustness with respect to changing traffic patterns. Traffic engineering methods are compared based on number of additional demands due to traffic uncertainty that can be carried. Regenerator placement algorithms are also evaluated from a traffic engineering point of view.

  6. Engineering modeling of traffic noise in shielded areas in cities.

    Science.gov (United States)

    Salomons, Erik M; Polinder, Henk; Lohman, Walter J A; Zhou, Han; Borst, Hieronymous C; Miedema, Henk M E

    2009-11-01

    A computational study of road traffic noise in cities is presented. Based on numerical boundary-element calculations of canyon-to-canyon propagation, an efficient engineering algorithm is developed to calculate the effect of multiple reflections in street canyons. The algorithm is supported by a room-acoustical analysis of the reverberant sound fields in the source and receiver canyons. Using the algorithm, a simple model for traffic noise in cities is developed. Noise maps and exposure distributions of the city of Amsterdam are calculated with the model, and for comparison also with an engineering model that is currently used for traffic noise impact assessments in cities. Considerable differences between the two model predictions are found for shielded buildings with day-evening-night levels of 40-60 dB at the facades. Further, an analysis is presented of level differences between the most and the least exposed facades of buildings. Large level differences are found for buildings directly exposed to traffic noise from nearby roads. It is shown that by a redistribution of traffic flow around these buildings, one can achieve low sound levels at quiet sides and a corresponding reduction in the percentage of highly annoyed inhabitants from typically 23% to 18%.

  7. Traffic

    International Nuclear Information System (INIS)

    Lichtblau, G.

    2001-01-01

    This chapter deals with passenger and freight traffic, public and private transportation, traffic related environmental impacts, future developments, traffic indicators, regional traffic planning, health costs due to road traffic related air pollution, noise pollution, measures and regulations for traffic control and fuels for traffic. In particular energy consumption, energy efficiency, pollutant emissions ( CO 2 , SO 2 , NO x , HC, CO, N 2 O, NH 3 and particulates) and environmental effects of the different types of traffic and different types of fuels are compared and studied. Legal regulations and measures for an effective traffic control are discussed. (a.n.)

  8. Traffic management simulation development : summary.

    Science.gov (United States)

    2011-01-01

    Increasingly, Florida traffic is monitored electronically by components of the Intelligent Traffic System (ITS), which send data to regional traffic management centers and assist management of traffic flows and incident response using software called...

  9. Simulation of Road Traffic Applying Model-Driven Engineering

    Directory of Open Access Journals (Sweden)

    Alberto FERNÁNDEZ-ISABEL

    2016-05-01

    Full Text Available Road traffic is an important phenomenon in modern societies. The study of its different aspects in the multiple scenarios where it happens is relevant for a huge number of problems. At the same time, its scale and complexity make it hard to study. Traffic simulations can alleviate these difficulties, simplifying the scenarios to consider and controlling their variables. However, their development also presents difficulties. The main ones come from the need to integrate the way of working of researchers and developers from multiple fields. Model-Driven Engineering (MDE addresses these problems using Modelling Languages (MLs and semi-automatic transformations to organise and describe the development, from requirements to code. This paper presents a domain-specific MDE framework for simulations of road traffic. It comprises an extensible ML, support tools, and development guidelines. The ML adopts an agent-based approach, which is focused on the roles of individuals in road traffic and their decision-making. A case study shows the process to model a traffic theory with the ML, and how to specialise that specification for an existing target platform and its simulations. The results are the basis for comparison with related work.

  10. Traffic Infrastructure in the Development of the Croatian Traffic System

    Directory of Open Access Journals (Sweden)

    Damir Šimulčik

    2012-10-01

    Full Text Available The absence of a long-term traffic policy and of the policyof financing the constntction and maintenance of traffic infrastructurefacilities, represents a synthesis of numerous unresolvedrelations whose negative effects are felt in the overalleconomic and traffic development and consequently theevaluation of national potentials in the field. Adverse aspectcaused by the lack of a clear and feasible policy of financing thetraffic infrastructure facilities, is also a result of not having definedan adequate traffic policy, programme and strategiccourses of development, nor financing models that would be inaccordance with the market and economy system.This indicates that it is necessary to determine a policy forfinancing the constntction and maintenance of traffic infrastntcture,which has to be based on scientific development,team work, availability of plans and programmes to scientistsand experts, determined methodology based on marketing andeconomic logic in defining the programme and strategic tasksand assignments so as to make them feasible.In the near future, intensive preparations for investments inthe overall traffic sysiem are necessary, especially regarding thetraffic infrastntcture facilities - the pivotal points in the processof evaluating the traffic in our national tenitory. Croatia needsto define clearly its strategy in constructing and maintaining thegeneral traffic infrastructure, appointing at the same time thosewho will carry out the given tasks.

  11. Engineering Education Tool for Distance Telephone Traffic Learning Through Web

    Directory of Open Access Journals (Sweden)

    Leonimer Flávio de Melo

    2012-11-01

    Full Text Available This work subject focuses in distance learning (DL modality by the Internet. The use of calculators and simulators software introduces a high level of interactivity in DL systems, such as Matlab software proposed by using in this work. The use of efficient mathematical packages and hypermedia technologies opens the door to a new paradigm of teaching and learning in the dawn of this new millennium. The use of hypertext, graphics, animation, audio, video, efficient calculators and simulators incorporating artificial intelligence techniques and the advance in the broadband networks will pave the way to this new horizon. The contribution of this work, besides the Matlab Web integration, is the developing of an introductory course in traffic engineering in hypertext format. Also, calculators to the most employed expressions of traffic analysis were developed to the Matlab server environment. By the use of the telephone traffic calculator, the user inputs data on his or her Internet browser and the systems returns numerical data, graphics and tables in HTML pages. The system is also very useful for Professional traffic calculations, replacing with advantages the use of the traditional methods by means of static tables and graphics in paper format.

  12. Electrical engineering research support for FDOT Traffic Statistics Office

    Science.gov (United States)

    2010-03-01

    The aim of this project was to provide electrical engineering support for the telemetered traffic monitoring sites (TTMSs) operated by the Statistics Office of the Florida Department of Transportation. This project was a continuation of project BD-54...

  13. 2012 national state safety engineers and traffic engineers peer-to-peer workshop.

    Science.gov (United States)

    2013-11-01

    The Illinois Department of Transportation (IDOT) and the Illinois Center for Transportation (ICT) sponsored and hosted the : 2012 National State Safety Engineers and Traffic Engineers Peer-to-Peer Workshop on November 14 and 15, 2012, at the : Hyatt ...

  14. Statistical Engineering in Air Traffic Management Research

    Science.gov (United States)

    Wilson, Sara R.

    2015-01-01

    NASA is working to develop an integrated set of advanced technologies to enable efficient arrival operations in high-density terminal airspace for the Next Generation Air Transportation System. This integrated arrival solution is being validated and verified in laboratories and transitioned to a field prototype for an operational demonstration at a major U.S. airport. Within NASA, this is a collaborative effort between Ames and Langley Research Centers involving a multi-year iterative experimentation process. Designing and analyzing a series of sequential batch computer simulations and human-in-the-loop experiments across multiple facilities and simulation environments involves a number of statistical challenges. Experiments conducted in separate laboratories typically have different limitations and constraints, and can take different approaches with respect to the fundamental principles of statistical design of experiments. This often makes it difficult to compare results from multiple experiments and incorporate findings into the next experiment in the series. A statistical engineering approach is being employed within this project to support risk-informed decision making and maximize the knowledge gained within the available resources. This presentation describes a statistical engineering case study from NASA, highlights statistical challenges, and discusses areas where existing statistical methodology is adapted and extended.

  15. Strategic Framework of Air Traffic Development

    Directory of Open Access Journals (Sweden)

    Sanja Steiner

    2008-05-01

    Full Text Available The paper elaborates the past development of air traffic inEurope from the aspect of its economic benefits and ecologicallack of sustainability of conventional technology. The mainguidelines of the strategic development are related to the implementationof the global ecological standard and actual reformationprocesses of the air traffic management system postulatedby A TM 2000+ Strategy and the "Single European Sky"standard. The paper studies the wider aspects of integrated trafficdevelopment at the regional level and the factors influencingfurther development of the European air traffic.

  16. The History of the Internet Search Engine: Navigational Media and the Traffic Commodity

    Science.gov (United States)

    van Couvering, E.

    This chapter traces the economic development of the search engine industry over time, beginning with the earliest Web search engines and ending with the domination of the market by Google, Yahoo! and MSN. Specifically, it focuses on the ways in which search engines are similar to and different from traditional media institutions, and how the relations between traditional and Internet media have changed over time. In addition to its historical overview, a core contribution of this chapter is the analysis of the industry using a media value chain based on audiences rather than on content, and the development of traffic as the core unit of exchange. It shows that traditional media companies failed when they attempted to create vertically integrated portals in the late 1990s, based on the idea of controlling Internet content, while search engines succeeded in creating huge "virtually integrated" networks based on control of Internet traffic rather than Internet content.

  17. Determinants of European air traffic development

    Directory of Open Access Journals (Sweden)

    Tomislav MIHETEC

    2008-01-01

    Full Text Available The paper elaborates main determinants of the strategic development as well as the key factors, which influence European air traffic dynamics. The problem of European airspace fragmentation should be solved by the comprehensive dynamic harmonization programmes, which can contribute to effective increase of airspace capacity and increase of air transport efficiency. The main objective of development strategy refers to the implementation of reformation processes of the European air traffic management system through functional ATM regionalization and adoption of Single European Sky legislation.

  18. Development in Danish international air traffic

    DEFF Research Database (Denmark)

    Christensen, Linda

    The paper is describing the development in international air traffic made by Danes and for all travellers out of Denmark in the period 2002 - 2012. Development in passengers, destination countries and prices is illustrated. The person kilometres by Danes have increased 80% or 7.2% per year in mean...... during the 10 years. This increase has been analysed by a panel data model. The conclusion found by modelling is the increasing travel activity first of all is driven by increasing income and to less extent by decreasing prices. The paper is furthermore showing how the international air traffic has got...

  19. Design and Development of Biometric Traffic Offence System (BTOS ...

    African Journals Online (AJOL)

    The study was about the design and development of Biometric Traffic Offence System (BTOS) that would ease storage and retrieval of traffic offence cases in the Federal Road Safety Commission (FRSC) and the Traffic department of Nigeria Police force. The method used to manage traffic cases is manual; information ...

  20. Remote sensing applications for transportation and traffic engineering studies: A review of the literature

    Science.gov (United States)

    Epps, J. W.

    1973-01-01

    Current references were surveyed for the application of remote sensing to traffic and transportation studies. The major problems are presented that concern traffic engineers and transportation managers, and the literature references that discuss remote sensing applications are summarized.

  1. Engineering Solutions to Enhance Traffic Safety Performance on Two-Lane Highways

    Directory of Open Access Journals (Sweden)

    Lina Wu

    2015-01-01

    Full Text Available Improving two-lane highway traffic safety conditions is of practical importance to the traffic system, which has attracted significant research attention within the last decade. Many cost-effective and proactive solutions such as low-cost treatments and roadway safety monitoring programs have been developed to enhance traffic safety performance under prevailing conditions. This study presents research perspectives achieved from the Highway Safety Enhancement Project (HSEP that assessed safety performance on two-lane highways in Beijing, China. Potential causal factors are identified based on proposed evaluation criteria, and primary countermeasures are developed against inferior driving conditions such as sharp curves, heavy gradients, continuous downgrades, poor sight distance, and poor clear zones. Six cost-effective engineering solutions were specifically implemented to improve two-lane highway safety conditions, including (1 traffic sign replacement, (2 repainting pavement markings, (3 roadside barrier installation, (4 intersection channelization, (5 drainage optimization, and (6 sight distance improvement. The effectiveness of these solutions was examined and evaluated based on Empirical Bayes (EB models. The results indicate that the proposed engineering solutions effectively improved traffic safety performance by significantly reducing crash occurrence risks and crash severities.

  2. Developing a Web-Based Advisory Expert System for Implementing Traffic Calming Strategies

    Directory of Open Access Journals (Sweden)

    Amir Falamarzi

    2014-01-01

    Full Text Available Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.

  3. RESEARCH OF ENGINEERING TRAFFIC IN COMPUTER UZ NETWORK USING MPLS TE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. M. Pakhomovа

    2014-12-01

    Full Text Available Purpose. In railway transport of Ukraine one requires the use of computer networks of different technologies: Ethernet, Token Bus, Token Ring, FDDI and others. In combined computer networks on the railway transport it is necessary to use packet switching technology in multiprotocol networks MPLS (MultiProtocol Label Switching more effectively. They are based on the use of tags. Packet network must transmit different types of traffic with a given quality of service. The purpose of the research is development a methodology for determining the sequence of destination flows for the considered fragment of computer network of UZ. Methodology. When optimizing traffic management in MPLS networks has the important role of technology traffic engineering (Traffic Engineering, TE. The main mechanism of TE in MPLS is the use of unidirectional tunnels (MPLS TE tunnel to specify the path of the specified traffic. The mathematical model of the problem of traffic engineering in computer network of UZ technology MPLS TE was made. Computer UZ network is represented with the directed graph, their vertices are routers of computer network, and each arc simulates communication between nodes. As an optimization criterion serves the minimum value of the maximum utilization of the TE-tunnel. Findings. The six options destination flows were determined; rational sequence of flows was found, at which the maximum utilization of TE-tunnels considered a simplified fragment of a computer UZ network does not exceed 0.5. Originality. The method of solving the problem of traffic engineering in Multiprotocol network UZ technology MPLS TE was proposed; for different classes its own way is laid, depending on the bandwidth and channel loading. Practical value. Ability to determine the values of the maximum coefficient of use of TE-tunnels in computer UZ networks based on developed software model «TraffEng». The input parameters of the model: number of routers, channel capacity, the

  4. Statistical modelling of traffic safety development

    DEFF Research Database (Denmark)

    Christens, Peter

    2004-01-01

    there were 6861 injury trafficc accidents reported by the police, resulting in 4519 minor injuries, 3946 serious injuries, and 431 fatalities. The general purpose of the research was to improve the insight into aggregated road safety methodology in Denmark. The aim was to analyse advanced statistical methods......, that were designed to study developments over time, including effects of interventions. This aim has been achieved by investigating variations in aggregated Danish traffic accident series and by applying state of the art methodologies to specific case studies. The thesis comprises an introduction...

  5. Development of a mobile application for manual traffic counts

    Directory of Open Access Journals (Sweden)

    Ghanim Mohammad

    2017-01-01

    Full Text Available The use of technology in performing traffic counts has become widely used by many transportation agencies and private sectors. Different technologies have been employed to perform such counts, such as inductive loops, image processing, Bluetooth technologies, and laser and infrared technologies. However, the use of these advanced technologies come with extra cost to develop, install, and maintain. While the use of advanced technologies provide reliable traffic counts and vehicle classifications data, the use of manual traffic is an inevitable task. Manual traffic counts can serve different purposes, such as performing quality control or conducting short-term traffic survey. Manual traffic counts are usually conducted with the use of the traditional paper-and-pencil approach or the use of hand-held devices that are specifically developed to assess performing manual traffic counts. In this paper, the development of a mobile app that can be used to assist those who need to perform manual traffic counts. The app can be used by many public agencies, private sectors, and college students to collect their traffic data. It also provides users with the capabilities of sharing their traffic counts instantly, where traffic counts can be extracted and processed quickly by other parties.

  6. Dynamic traffic grooming with Spectrum Engineering (TG-SE) in flexible grid optical networks

    Science.gov (United States)

    Yu, Xiaosong; Zhao, Yongli; Zhang, Jiawei; Wang, Jianping; Zhang, Guoying; Chen, Xue; Zhang, Jie

    2015-12-01

    Flexible grid has emerged as an evolutionary technology to satisfy the ever increasing demand for higher spectrum efficiency and operational flexibility. To optimize the spectrum resource utilization, this paper introduces the concept of Spectrum Engineering in flex-grid optical networks. The sliceable optical transponder has been proposed to offload IP traffic to the optical layer and reduce the number of IP router ports and transponders. We discuss the impact of sliceable transponder in traffic grooming and propose several traffic-grooming schemes with Spectrum Engineering (TG-SE). Our results show that there is a tradeoff among different traffic grooming policies, which should be adopted based on the network operator's objectives. The proposed traffic grooming with Spectrum Engineering schemes can reduce OPEX as well as increase spectrum efficiency by efficiently utilizing the bandwidth variability and capability of sliceable optical transponders.

  7. Public transportation development and traffic accident prevention in Indonesia

    Directory of Open Access Journals (Sweden)

    Sutanto Soehodho

    2017-03-01

    Full Text Available Traffic accidents have long been known as an iceberg for comprehending the discrepancies of traffic management and entire transportation systems. Figures detailing traffic accidents in Indonesia, as is the case in many other countries, show significantly high numbers and severity levels; these types of totals are also evident in Jakarta, the highest-populated city in the country. While the common consensus recognizes that traffic accidents are the results of three different factor types, namely, human factors, vehicle factors, and external factors (including road conditions, human factors have the strongest influence—and figures on a worldwide scale corroborate that assertion. We, however, try to pinpoint the issues of non-human factors in light of increasing traffic accidents in Indonesia, where motorbike accidents account for the majority of incidents. We then consider three important pillars of action: the development of public transportation, improvement of the road ratio, and traffic management measures.

  8. Civil engineering support for the traffic monitoring program : final report, January 2010.

    Science.gov (United States)

    2010-01-01

    This project was aimed at providing various civil engineering support services for the telemetered traffic monitoring sites operated by the Statistics Office of the Florida Department of Transportation. This was a companion project to the one that pr...

  9. Developments in weather responsive traffic management strategies.

    Science.gov (United States)

    2011-06-01

    This report provides a comprehensive overview of weather-responsive traffic management practices. It focuses on what WRTM strategies exist, where they have been used, the benefits realized, what improvements are needed, and how to implement and evalu...

  10. Development of Traffic Accidents Control System

    Directory of Open Access Journals (Sweden)

    Andrey Borisovich Nikolaev

    2015-05-01

    Full Text Available Proposed a structure of traffic accidents control system included three main parts: pre-processing, decision support and monitoring. For decision support systems we propose a method that allows to make decisions on the basis of fuzzy situational management. The advantage of the method: it allows to formalize a set of typical traffic situations, using the theory of fuzzy sets and to carry out selection of the desired management action.

  11. Economic development, mobility and traffic accidents in Algeria.

    Science.gov (United States)

    Bougueroua, M; Carnis, L

    2016-07-01

    The aim of this contribution is to estimate the impact of road economic conditions and mobility on traffic accidents for the case of Algeria. Using the cointegration approach and vector error correction model (VECM), we will examine simultaneously short term and long-term impacts between the number of traffic accidents, fuel consumption and gross domestic product (GDP) per capital, over the period 1970-2013. The main results of the estimation show that the number of traffic accidents in Algeria is positively influenced by the GDP per capita in the short and long term. It implies that a higher economic development worsens the road safety situation. However, the new traffic rules adopted in 2009 have an impact on the forecast trend of traffic accidents, meaning efficient public policy could improve the situation. This result calls for a strong political commitment with effective countermeasures for avoiding the further deterioration of road safety record in Algeria. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Skills Conversion Project: Chapter 5, Transportation and Traffic Engineering. Final Report.

    Science.gov (United States)

    National Society of Professional Engineers, Washington, DC.

    In order to determine the potential of the transportation and traffic engineering industry to employ dislocated aerospace and defense professional personnel with technical skills, a national survey was conducted by the Los Angeles and Boston skills conversion teams of the National Society of Professional Engineers, under contract to the Department…

  13. Development of a forecast model for global air traffic emissions

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, Martin

    2012-07-01

    The thesis describes the methodology and results of a simulation model that quantifies fuel consumption and emissions of civil air traffic. Besides covering historical emissions, the model aims at forecasting emissions in the medium-term future. For this purpose, simulation models of aircraft and engine types are used in combination with a database of global flight movements and assumptions about traffic growth, fleet rollover and operational aspects. Results from an application of the model include emissions of scheduled air traffic for the years 2000 to 2010 as well as forecasted emissions until the year 2030. In a baseline scenario of the forecast, input assumptions (e.g. traffic growth rates) are in line with predictions by the aircraft industry. Considering the effects of advanced technologies of the short-term and medium-term future, the forecast focusses on fuel consumption and emissions of nitric oxides. Calculations for historical air traffic additionally cover emissions of carbon monoxide, unburned hydrocarbons and soot. Results are validated against reference data including studies by the International Civil Aviation Organization (ICAO) and simulation results from international research projects. (orig.)

  14. Engineering solutions of traffic safety problems of road transport

    Directory of Open Access Journals (Sweden)

    M. Bogdevičius

    2004-02-01

    Full Text Available The authors of this paper focus on the simulation of the motor vehicle movement (taking into consideration motor vehicle dynamics, motor vehicle hydraulic brake system influence on motor vehicle movement, interaction between its wheels with road pavements, road guardrail characteristics, interaction between motor vehicle and road guardrail on a certain road section and propose their specific solution of this problem. The presented results, illustrating the motor vehicle movement trajectories (motor vehicle braking and interaction between motor vehicle and road guardrail at various initial conditions and at various certain pavement surface of the road section under investigation and work of a motor vehicle hydraulic brake system. Taking into consideration the presented general mathematical model and computer aided test results it is possible to investigate various road transport traffic situations as well as to investigate various transport traffic safety problems.

  15. Development and application of traffic flow information collecting and analysis system based on multi-type video

    Science.gov (United States)

    Lu, Mujie; Shang, Wenjie; Ji, Xinkai; Hua, Mingzhuang; Cheng, Kuo

    2015-12-01

    Nowadays, intelligent transportation system (ITS) has already become the new direction of transportation development. Traffic data, as a fundamental part of intelligent transportation system, is having a more and more crucial status. In recent years, video observation technology has been widely used in the field of traffic information collecting. Traffic flow information contained in video data has many advantages which is comprehensive and can be stored for a long time, but there are still many problems, such as low precision and high cost in the process of collecting information. This paper aiming at these problems, proposes a kind of traffic target detection method with broad applicability. Based on three different ways of getting video data, such as aerial photography, fixed camera and handheld camera, we develop a kind of intelligent analysis software which can be used to extract the macroscopic, microscopic traffic flow information in the video, and the information can be used for traffic analysis and transportation planning. For road intersections, the system uses frame difference method to extract traffic information, for freeway sections, the system uses optical flow method to track the vehicles. The system was applied in Nanjing, Jiangsu province, and the application shows that the system for extracting different types of traffic flow information has a high accuracy, it can meet the needs of traffic engineering observations and has a good application prospect.

  16. Reducing OR Traffic Using Education, Policy Development, and Communication Technology.

    Science.gov (United States)

    Esser, Jennifer; Shrinski, Keonemana; Cady, Rhonda; Belew, John

    2016-01-01

    A bundled approach to surgical site infection (SSI) prevention strategies includes reducing OR traffic. A nurse-led quality improvement (QI) team sought to reduce OR traffic through education and a process change that included wireless communication technology and policy development. The team measured OR traffic by counting the frequency of door openings per hour in seven surgical suites during 305 surgical procedures conducted during similar 22-week periods before and after the QI project intervention. Door openings decreased significantly (P < 0.05) from an average of 37.8 per hour to 32.8 per hour after the QI project intervention. This suggests that our multifaceted approach reduces OR traffic. The next steps of this project include analyzing automatically captured video to understand OR traffic patterns and expanding education to departments and external personnel frequently present in our surgical suites. Future research evaluating the effectiveness of this OR traffic initiative on SSI incidence is recommended. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

  17. Development of Road Traffic Assignment and Assessment Sub-Model Applied in the Traffic Study ...

    Directory of Open Access Journals (Sweden)

    Dražen Topolnik

    2012-10-01

    Full Text Available The described sub-model is just one small segment of theTraffic Study of the City of Zagreb, in the development of whichnumerous foreign and national experts and institutions tookpart. After comprehensive collection and processing of inputdata, the traffic experts, using the software package "MVATRIPS" for the analysis and search for optimal solutions to theproblem of traffic system, provided the models of public urbantransit for the future.This paper describes the analysis and assessment of sub-models in road traffic assignment for the morning peak, afternoonpeak and average off-peak hours. The principles of assignmentprocedure have been described as well as the convergencetests. The following has been specified: the users categories,the public transit pre-load, and the passenger car unit(PC U. The key guideline in selecting the route is a generalisedformulation of costs presented in the paper. The procedures ofcalibration and the assessment of the finite model have alsobeen defined according to the screenline flows, link flows, andtravelling times. In the end, the summary is given of the basiccharacteristics of the finite travelling matrices.

  18. Game-Aided Education for Transportation Engineering: Design, Development, and Assessment

    OpenAIRE

    Wang, Qichao

    2017-01-01

    Transportation engineering is a wide area that covers different topics including traffic planning, highway design, pavement design, traffic safety, and traffic control. Certain concepts in those topics are challenging and are hard to understand based on textbooks and lectures. In this work, we developed five web games targeting the five topics in transportation engineering education to improve students’ understanding of those hard concepts. The games are hosted in a website server. Students c...

  19. Developing systems engineers

    CSIR Research Space (South Africa)

    Goncalves, D

    2008-07-01

    Full Text Available will have rendered him incapable of dealing with the majority of problems that will face him.” (Quoted in [12]). UP has applied the SPICES model, proposed by Harden et al. [12], for developing their medical curriculum. Some aspects of the model... are useful to developing systems engineers and will be considered in SE terms at a relevant level of detail. The SPICES model is contrasted against traditional medical curriculum approaches in TABLE 1. These are two extremes on a continuum. Traditional...

  20. Engineering sustainable development

    International Nuclear Information System (INIS)

    Prendergast, J.

    1993-01-01

    This article discusses sustainable development, a policy which attempts to balance environmental preservation and economic growth, and promises a way to provide a decent life for Earth's human inhabitants without destroying the global ecosystem. Sustainable development is an effort to use technology to help clean up the mess it helped make, and engineers will be central players in its success or failure. Key aspects include more efficient energy use through conservation measures and switching to renewable sources, waste minimization, much greater recycling and reuse of materials, more comprehensive economic/environmental assessments employing life-cycle analyses, and better management of resources

  1. RAIL TRAFFIC VOLUME ESTIMATION BASED ON WORLD DEVELOPMENT INDICATORS

    Directory of Open Access Journals (Sweden)

    Luka Lazarević

    2015-08-01

    Full Text Available European transport policy, defined in the White Paper, supports shift from road to rail and waterborne transport. The hypothesis of the paper is that changes in the economic environment influence rail traffic volume. Therefore, a model for prediction of rail traffic volume applied in different economic contexts could be a valuable tool for the transport planners. The model was built using common Machine Learning techniques that learn from the past experience. In the model preparation, world development indicators defined by the World Bank were used as input parameters.

  2. Environmental Engineering and Sustainable Development

    OpenAIRE

    Said Salah Eldin Elnashaie

    2018-01-01

    Chemical Engineering is a very rich discipline and it is best classified using System Theory (ST) and utilized using the Integrated System Approach (ISA). Environmental Engineering (EE) is a subsystem of Chemical Engineering and also a subsystem of Sustainable Development (SD). In this paper both EE and SD are discussed from a Chemical Engineering point of view utilizing ST and ISA.

  3. Noise abatement and traffic safety: The trade-off of quieter engines and pavements on vehicle detection.

    Science.gov (United States)

    Mendonça, C; Freitas, E; Ferreira, J P; Raimundo, I D; Santos, J A

    2013-03-01

    Road traffic sounds are a major source of noise pollution in urban areas. But recent developments such as low noise pavements and hybrid/electric engine vehicles cast an optimistic outlook over such an environmental problem. However, it can be argued that engine, tire, and road noise could be relevant sources of information to avoid road traffic conflicts and accidents. In this paper, we analyze the potential trade-offs of traffic-noise abatement approaches in an experimental study, focusing for the first time on the impact and interaction of relevant factors such as pavement type, vehicle type, listener's age, and background noise, on vehicle detection levels. Results reveal that vehicle and pavement type significantly affect vehicle detection. Age is a significant factor, as both younger and older people exhibit lower detection levels of incoming vehicles. Low noise pavements combined with all-electric and hybrid vehicles might pose a severe threat to the safety of vulnerable road users. All factors interact simultaneously, and vehicle detection is best predicted by the loudness signal-to-noise ratio. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Two-vehicle injury severity models based on integration of pavement management and traffic engineering factors.

    Science.gov (United States)

    Jiang, Ximiao; Huang, Baoshan; Yan, Xuedong; Zaretzki, Russell L; Richards, Stephen

    2013-01-01

    The severity of traffic-related injuries has been studied by many researchers in recent decades. However, the evaluation of many factors is still in dispute and, until this point, few studies have taken into account pavement management factors as points of interest. The objective of this article is to evaluate the combined influences of pavement management factors and traditional traffic engineering factors on the injury severity of 2-vehicle crashes. This study examines 2-vehicle rear-end, sideswipe, and angle collisions that occurred on Tennessee state routes from 2004 to 2008. Both the traditional ordered probit (OP) model and Bayesian ordered probit (BOP) model with weak informative prior were fitted for each collision type. The performances of these models were evaluated based on the parameter estimates and deviances. The results indicated that pavement management factors played identical roles in all 3 collision types. Pavement serviceability produces significant positive effects on the severity of injuries. The pavement distress index (PDI), rutting depth (RD), and rutting depth difference between right and left wheels (RD_df) were not significant in any of these 3 collision types. The effects of traffic engineering factors varied across collision types, except that a few were consistently significant in all 3 collision types, such as annual average daily traffic (AADT), rural-urban location, speed limit, peaking hour, and light condition. The findings of this study indicated that improved pavement quality does not necessarily lessen the severity of injuries when a 2-vehicle crash occurs. The effects of traffic engineering factors are not universal but vary by the type of crash. The study also found that the BOP model with a weak informative prior can be used as an alternative but was not superior to the traditional OP model in terms of overall performance.

  5. Monitoring Traffic Information with a Developed Acceleration Sensing Node

    Directory of Open Access Journals (Sweden)

    Zhoujing Ye

    2017-12-01

    Full Text Available In this paper, an acceleration sensing node for pavement vibration was developed to monitor traffic information, including vehicle speed, vehicle types, and traffic flow, where a hardware design with low energy consumption and node encapsulation could be accomplished. The service performance of the sensing node was evaluated, by methods including waterproof test, compression test, sensing performance analysis, and comparison test. The results demonstrate that the sensing node is low in energy consumption, high in strength, IPX8 waterproof, and high in sensitivity and resolution. These characteristics can be applied to practical road environments. Two sensing nodes were spaced apart in the direction of travelling. In the experiment, three types of vehicles passed by the monitoring points at several different speeds and values of d (the distance between the sensor and the nearest tire center line. Based on cross-correlation with kernel pre-smoothing, a calculation method was applied to process the raw data. New algorithms for traffic flow, speed, and axle length were proposed. Finally, the effects of vehicle speed, vehicle weight, and d value on acceleration amplitude were statistically evaluated. It was found that the acceleration sensing node can be used for traffic flow, vehicle speed, and other types of monitoring.

  6. Monitoring Traffic Information with a Developed Acceleration Sensing Node.

    Science.gov (United States)

    Ye, Zhoujing; Wang, Linbing; Xu, Wen; Gao, Zhifei; Yan, Guannan

    2017-12-05

    In this paper, an acceleration sensing node for pavement vibration was developed to monitor traffic information, including vehicle speed, vehicle types, and traffic flow, where a hardware design with low energy consumption and node encapsulation could be accomplished. The service performance of the sensing node was evaluated, by methods including waterproof test, compression test, sensing performance analysis, and comparison test. The results demonstrate that the sensing node is low in energy consumption, high in strength, IPX8 waterproof, and high in sensitivity and resolution. These characteristics can be applied to practical road environments. Two sensing nodes were spaced apart in the direction of travelling. In the experiment, three types of vehicles passed by the monitoring points at several different speeds and values of d (the distance between the sensor and the nearest tire center line). Based on cross-correlation with kernel pre-smoothing, a calculation method was applied to process the raw data. New algorithms for traffic flow, speed, and axle length were proposed. Finally, the effects of vehicle speed, vehicle weight, and d value on acceleration amplitude were statistically evaluated. It was found that the acceleration sensing node can be used for traffic flow, vehicle speed, and other types of monitoring.

  7. Protocol vulnerability detection based on network traffic analysis and binary reverse engineering.

    Science.gov (United States)

    Wen, Shameng; Meng, Qingkun; Feng, Chao; Tang, Chaojing

    2017-01-01

    Network protocol vulnerability detection plays an important role in many domains, including protocol security analysis, application security, and network intrusion detection. In this study, by analyzing the general fuzzing method of network protocols, we propose a novel approach that combines network traffic analysis with the binary reverse engineering method. For network traffic analysis, the block-based protocol description language is introduced to construct test scripts, while the binary reverse engineering method employs the genetic algorithm with a fitness function designed to focus on code coverage. This combination leads to a substantial improvement in fuzz testing for network protocols. We build a prototype system and use it to test several real-world network protocol implementations. The experimental results show that the proposed approach detects vulnerabilities more efficiently and effectively than general fuzzing methods such as SPIKE.

  8. Protocol vulnerability detection based on network traffic analysis and binary reverse engineering.

    Directory of Open Access Journals (Sweden)

    Shameng Wen

    Full Text Available Network protocol vulnerability detection plays an important role in many domains, including protocol security analysis, application security, and network intrusion detection. In this study, by analyzing the general fuzzing method of network protocols, we propose a novel approach that combines network traffic analysis with the binary reverse engineering method. For network traffic analysis, the block-based protocol description language is introduced to construct test scripts, while the binary reverse engineering method employs the genetic algorithm with a fitness function designed to focus on code coverage. This combination leads to a substantial improvement in fuzz testing for network protocols. We build a prototype system and use it to test several real-world network protocol implementations. The experimental results show that the proposed approach detects vulnerabilities more efficiently and effectively than general fuzzing methods such as SPIKE.

  9. Road traffic injuries in developing countries: research and action agenda

    OpenAIRE

    Huang, Cheng-Min; International Injury Research Unit, Department of International Health, Johns Hopkins Bloomberg School of Public Health. Baltimore, MD, USA. Médico, Magíster en Ciencias de la Salud.; Lunnen, Jeffrey C.; International Injury Research Unit, Department of International Health, Johns Hopkins Bloomberg School of Public Health. Baltimore, MD, USA. Candidato a Magíster en Estudios de la Mujer.; Miranda, J. Jaime; Programa de Investigación en Accidentes de Tránsito, Salud Sin Límites Perú. Lima, Perú. Facultad de Medicina, Universidad Peruana Cayetano Heredia. Lima, Perú. Médico, Magíster y Doctor en Epidemiología.; Hyder, Adnan A.; International Injury Research Unit, Department of International Health, Johns Hopkins Bloomberg School of Public Health. Baltimore, MD, USA. Médico Magíster y Doctor en Salud Pública.

    2010-01-01

    Road traffic injury (RTI) is the leading cause of death in persons aged 10-24 worldwide and accounts for about 15% of all male deaths. The burden of RTI is unevenly distributed amongst countries with over eighty-fold differences between the highest and lowest death rates. Thus the unequal risk of RTI occurring in the developing world, due to many reasons, including but not limited to rapid motorization and poor infrastructure, is a major global challenge. This editorial highlights a numbe...

  10. Development of engineered barrier

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Kwan Sik; Cho, Won Jin; Lee, Jae Owan; Kim, Seung Soo; Kang, Mu Ja

    1999-03-01

    Engineered barrier development was carried out into the three research fields : waste form, disposal container, and buffer. The waste form field dealt with long-term leaching tests with borosilicate waste glasses surrounded by compacted bentonite. The leach rate decreased with increasing time, and was higher for the waste specimen rich in U and Na. In the container field, preliminary concepts of disposal containers were recommended by conducting structural analysis, thermal analysis, and shielding analysis, and major properties of stainless steel, copper, and titanium as a container material were surveyed. The sensitization degrees of SUS 316 and316L were lower than those of SUS 304 and 304L, respectively. The crevice corrosion of sensitized stainless steel was sensitive to the content of salt. Researches into the buffer included establishment of its performance criteria followed by investigating major properties of buffer using potential material in Korea. Experiments were made for measuring hydraulic conductivities, swelling properties, mechanical properties, thermal conductivities, pore-water chemistry properties, and adsorption properties was also investigated. (author)

  11. Development of engineered barrier

    International Nuclear Information System (INIS)

    Chun, Kwan Sik; Cho, Won Jin; Lee, Jae Owan; Kim, Seung Soo; Kang, Mu Ja

    1999-03-01

    Engineered barrier development was carried out into the three research fields : waste form, disposal container, and buffer. The waste form field dealt with long-term leaching tests with borosilicate waste glasses surrounded by compacted bentonite. The leach rate decreased with increasing time, and was higher for the waste specimen rich in U and Na. In the container field, preliminary concepts of disposal containers were recommended by conducting structural analysis, thermal analysis, and shielding analysis, and major properties of stainless steel, copper, and titanium as a container material were surveyed. The sensitization degrees of SUS 316 and 316L were lower than those of SUS 304 and 304L, respectively. The crevice corrosion of sensitized stainless steel was sensitive to the content of salt. Researches into the buffer included establishment of its performance criteria followed by investigating major properties of buffer using potential material in Korea. Experiments were made for measuring hydraulic conductivities, swelling properties, mechanical properties, thermal conductivities, pore-water chemistry properties, and adsorption properties was also investigated. (author)

  12. Investigation of the impact of low cost traffic engineering measures on road safety in urban areas.

    Science.gov (United States)

    Yannis, George; Kondyli, Alexandra; Georgopoulou, Xenia

    2014-01-01

    This paper investigates the impact of low cost traffic engineering measures (LCTEMs) on the improvement of road safety in urban areas. A number of such measures were considered, such as speed humps, woonerfs, raised intersections and other traffic calming measures, which have been implemented on one-way, one-lane roads in the Municipality of Neo Psychiko in the Greater Athens Area. Data were analysed using the before-and-after safety analysis methodology with large control group. The selected control group comprised of two Municipalities in the Athens Greater Area, which present similar road network and land use characteristics with the area considered. The application of the methodology showed that the total number of crashes presented a statistically significant reduction, which can be possibly attributed to the introduction of LCTEMs. This reduction concerns passenger cars and single-vehicle crashes and is possibly due to the behavioural improvement of drivers of 25 years old or more. The results of this research are very useful for the identification of the appropriate low cost traffic engineering countermeasures for road safety problems in urban areas.

  13. Traffic Infrastructure and Economics Development in the Republic of Croatia

    Directory of Open Access Journals (Sweden)

    Damir Šimulčik

    2012-10-01

    Full Text Available Traffic infrastructure makes an integral pwt of the trafficand economic system in each country. The traffic policy makershave a task, that their policy must be based on scientific developmentsand synchronised activity of all economic systemsegments.

  14. Accounting engineering for sustainable development

    Directory of Open Access Journals (Sweden)

    Sidornya A.

    2017-01-01

    Full Text Available The article deals with the sustainable development of industrial enterprises in Russia, accounting for sustainable industrial growth of the national economy, tools of accounting engineering aimed at creating an information basis of transformation the Russian economic model to knowledge based economy. The proposed mechanism of ownership control of industrial enterprises in the context of long-term planning of the national economy. Theoretical bases of accounting engineering, its tools are defined. A brief review of the literature on the problem of accounting engineering is provided. A practical example of the application of the accounting engineering logic for the industrial enterprise is reviewed. It describes the research results obtained during the last 25 years of Russian scientific school of accounting engineering. Conclusions and recommendations on the use of accounting engineering to sustainable development of the Russian economy are formulated.

  15. The development of area wide traffic management scenarios

    NARCIS (Netherlands)

    Van Zuylen, H.J.; Lu, S.; Li, J.; Yusen, C.

    2014-01-01

    Traffic management in cities with congestion is a big challenge with still unused opportunities. Intersection control is a corner stone but this should be done in an area-wide context. The dominant traffic process on urban roads is the traffic flow on the intersections. Spill back is a most

  16. Traffic safety developments in Poland : a research note.

    NARCIS (Netherlands)

    Oppe, S.

    2001-01-01

    Recently there has been an increased interest in traffic safety in Poland. There is a feeling that the rapid growth of traffic should be accompanied by additional efforts to improve traffic safety, in order to stop the corresponding increase in fatalities and serious accidents. To set realistic

  17. Automotive Stirling Engine Development Project

    Science.gov (United States)

    Ernst, William D.; Shaltens, Richard K.

    1997-01-01

    The development and verification of automotive Stirling engine (ASE) component and system technology is described as it evolved through two experimental engine designs: the Mod 1 and the Mod 2. Engine operation and performance and endurance test results for the Mod 1 are summarized. Mod 2 engine and component development progress is traced from the original design through hardware development, laboratory test, and vehicle installation. More than 21,000 hr of testing were accomplished, including 4800 hr with vehicles that were driven more dm 59,000 miles. Mod 2 engine dynamometer tests demonstrated that the engine system configuration had accomplished its performance goals for power (60 kW) and efficiency (38.5%) to within a few percent. Tests with the Mod 2 engine installed in a delivery van demonstrated combined metro-highway fuel economy improvements consistent with engine performance goals and the potential for low emission levels. A modified version of the Mod 2 has been identified as a manufacturable design for an ASE. As part of the ASE project, the Industry Test and Evaluation Program (ITEP), NASA Technology Utilization (TU) project, and the industry-funded Stirling Natural Gas Engine program were undertaken to transfer ASE technology to end users. The results of these technology transfer efforts are also summarized.

  18. Development of a Traffic Management Decision Support Tool for Freeway Incident Traffic Management (FITM) Plan Deployment

    Science.gov (United States)

    2017-12-01

    Traffic incidents have long been recognized as the main contributor to congestion in highway networks. Thus, contending with non-recurrent congestion has been a priority task for most highway agencies over the past decades. Under most incident scenar...

  19. Educating Engineers for Sustainable Development

    DEFF Research Database (Denmark)

    Myrdal, Christina Grann; Holgaard, Jette Egelund

    In this paper, we explore the potentials of designing engineering education activities for sustainability development based on how environmental concerns are integrated into product development processes in a company context. First we draw on a case study from the Danish company Grundfos Management...... A/S and based on their experience with product development practise and competence development of product developers, we propose a set of competences to be addressed in engineering education for sustainable development (EESD). Furthermore, we use the problem based learning philosophy as a base...

  20. Evaluation of criteria for developing traffic safety materials for Latinos.

    Science.gov (United States)

    Streit-Kaplan, Erica L; Miara, Christine; Formica, Scott W; Gallagher, Susan Scavo

    2011-03-01

    This quantitative study assessed the validity of guidelines that identified four key characteristics of culturally appropriate Spanish-language traffic safety materials: language, translation, formative evaluation, and credible source material. From a sample of 190, the authors randomly selected 12 Spanish-language educational materials for analysis by 15 experts. Hypotheses included that the experts would rate materials with more of the key characteristics as more effective (likely to affect behavioral change) and rate materials originally developed in Spanish and those that utilized formative evaluation (e.g., pilot tests, focus groups) as more culturally appropriate. Although results revealed a weak association between the number of key characteristics in a material and the rating of its effectiveness, reviewers rated materials originally created in Spanish and those utilizing formative evaluation as significantly more culturally appropriate. The findings and methodology demonstrated important implications for developers and evaluators of any health-related materials for Spanish speakers and other population groups.

  1. Development of a Gridded Maritime Traffic DB for e-Navigation

    Directory of Open Access Journals (Sweden)

    Kwang-Il Kim

    2014-12-01

    Full Text Available In the era of e-Navigation, it is important to deliver maritime traffic information from a shore based station to all navigating vessels. However, in a vessel boarding system, there is a limit to the amount of raw traffic data that can be processed. In this paper, we used the Automatic Identification System (AIS data as metadata to build up the maritime traffic gridded database by projecting traffic data on a geographic coordinate system. In order to apply this database to the image layer for transferring to the ship efficiently, we have developed a maritime traffic display layer and route traffic information layer. All simulated data was collected and analyzed with the AIS in a Vessel Traffic Service(VTS center.

  2. THE QUESTION OF DEVELOPMENT OF AUTOMATED SYSTEMS FOR TRAFFIC MANAGEMENT

    Directory of Open Access Journals (Sweden)

    V. Shirin

    2015-12-01

    Full Text Available The current systems and methods for automated traffic management in cities are analyzed. The management in cities is analyzed. The management levels are specified. There were fermulated the general requirements, objectives and funnctions of the automated sistems for traffic management with regard to the modern transport problems as well as proposed their aditional managemrnt and infor-maton functions. A phased approach to the implementation of projects on creation of automated sys-tems of traffic management is offered.

  3. LDUA engineering development plan

    International Nuclear Information System (INIS)

    Engstrom, J.W.

    1994-01-01

    This document provides guidance to perform Light Duty Utility Arm (LDUA) development work and documentation required to validate the design of the LDUA System.The LDUA system will be used to deploy various types of sensors and devices to demonstrate the technology and qualify the integrated systems for operational use in the Hanford single shell tanks to characterize the waste inside and assess tank integrity

  4. Human-system safety methods for development of advanced air traffic management systems

    International Nuclear Information System (INIS)

    Nelson, William R.

    1999-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is supporting the National Aeronautics and Space Administration in the development of advanced air traffic management (ATM) systems as part of the Advanced Air Transportation Technologies program. As part of this program INEEL conducted a survey of human-system safety methods that have been applied to complex technical systems, to identify lessons learned from these applications and provide recommendations for the development of advanced ATM systems. The domains that were surveyed included offshore oil and gas, commercial nuclear power, commercial aviation, and military. The survey showed that widely different approaches are used in these industries, and that the methods used range from very high-level, qualitative approaches to very detailed quantitative methods such as human reliability analysis (HRA) and probabilistic safety assessment (PSA). In addition, the industries varied widely in how effectively they incorporate human-system safety assessment in the design, development, and testing of complex technical systems. In spite of the lack of uniformity in the approaches and methods used, it was found that methods are available that can be combined and adapted to support the development of advanced air traffic management systems (author) (ml)

  5. Development of an uninterrupted solar powered traffic light from ...

    African Journals Online (AJOL)

    Advances in transport technology have brought benefits, but growing vehicular traffic and increased fossil fuel use have created problems. In view of these, the need to address the shortage of important infrastructures such as traffic light systems in most cities of Nigeria is imperative. This paper aims at designing, ...

  6. Research on Urban Road Traffic Congestion Charging Based on Sustainable Development

    Science.gov (United States)

    Ye, Sun

    Traffic congestion is a major problem which bothers our urban traffic sustainable development at present. Congestion charging is an effective measure to alleviate urban traffic congestion. The paper first probes into several key issues such as the goal, the pricing, the scope, the method and the redistribution of congestion charging from theoretical angle. Then it introduces congestion charging practice in Singapore and London and draws conclusion and suggestion that traffic congestion charging should take scientific plan, support of public, public transportation development as the premise.

  7. Engineering research, development and technology

    International Nuclear Information System (INIS)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

  8. development of an electronic vehicular traffic signal controller

    African Journals Online (AJOL)

    INTRODUCTION ... The SCOOT (Split Cycle Offset Optimization Technique) signal control system implements an adaptive ... An electronic traffic signal controller is basically a sequential machine whose operation can be modeled using finite ...

  9. Design and Development of Biometric Traffic Offence System (BTOS)

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2014-12-01

    Dec 1, 2014 ... manage traffic cases is manual; information collected daily is written on paper and stored in ... The system is thus user friendly in the way it inserts, retrieves and updates user .... importance of discipline on the highway.

  10. Development of traffic light control algorithm in smart municipal network

    OpenAIRE

    Kuzminykh, Ievgeniia

    2016-01-01

    This paper presents smart system that bypasses the normal functioning algorithm of traffic lights, triggers a green light when the lights are red or reset the timer of the traffic lights when they are about to turn red. Different pieces of hardware like microcontroller units, transceivers, resistors, diodes, LEDs, a digital compass and accelerometer will be coupled together and programed to create unified complex intelligent system.

  11. Traffic pathways of Plasmodium vivax antigens during intraerythrocytic parasite development.

    Science.gov (United States)

    Bracho, Carmen; Dunia, Irene; De, La Rosa Mercedes; Benedetti, Ennio-Lucio; Perez, Hilda A

    2002-03-01

    We investigated the secretory traffic of a Plasmodium vivax antigen (Pv-148) synthesised by the parasite during the blood cycle, exported into the host cell cytosol and then transported to the surface membrane of the infected erythrocyte. Studies of the ultrastructure of erythrocytes infected with P. vivax showed that intracellular schizogony is accompanied by the generation of parasite-induced membrane profiles in the erythrocyte cytoplasm. These structures are detectable soon after the parasite invades the erythrocyte and develop an elaborate organisation, leading to a tubovesicular membrane (TVM) network, in erythrocytes infected with mature trophozoites. Interestingly, the clefts formed stacked, flattened cisternae resembling a classical Golgi apparatus. The TVM network stained with the fluorescent Golgi marker Bodipy-ceramide. Specific immunolabelling showed that Pv-148 was transferred from the parasite to the erythrocyte surface membrane via the clefts and the TVM network. These findings suggest that the TVM network is part of the secretory pathways involved in parasite protein transport across the Plasmodium-infected erythrocyte and that Pv- 148 may represent a marker that links the parasite with the host cell cytoplasm and, in turn, with the extracellular milieu.

  12. Transforming Engineering Education - For Innovation and Development

    DEFF Research Database (Denmark)

    Marjoram, Tony

    2013-01-01

    Engineering and technology are of vital importance in innovation, social and economic development in higher and lower income countries. Development is driven by engineering applications and infrastructure, and most innovations derive from engineering. The last 50 years has seen significant change...... of young people in engineering, and the need to develop policy perspectives on the transformation of engineering education....... in knowledge production, dissemination and application, and associated needs for engineering, and yet engineering education has changed little over this period. This paper discusses the important role of problem-based learning and humanitarian engineering in promoting the interest, enrolment and retention...

  13. Method Engineering: Engineering of Information Systems Development Methods and Tools

    NARCIS (Netherlands)

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

  14. Modem Communications Systems Development Guidelines in Function of Air Traffic Safety ...

    Directory of Open Access Journals (Sweden)

    Petar Obradović

    2007-05-01

    Full Text Available The communications requirements in air traffic control areincreasing in complexity. From the middle 90s, huge progress inairport infrastructure, especially in air traffic control systems,has been made in Bosnia and Herzegovina in damage rehabilitation,caused by war conflicts, owing, first of all, to the EuropeanUnion aid that contributed to the re-establishment of regularinternational air traffic. The current air traffic control systemhas matured in its functionality. Therefore, the phase of advancementand preparation for the technological improvementis the next logical step. However, before establishing a new communicationsstrategy, the current application trends have to beanalyzed in details according to the existing communicationsenvironment interfaces. The goal of this work is to find theguidelines of technological development that will result in moreefficiency, safety and economic benefit in the near future, butthe air traffic safety must not be compromised by economicbenefit.

  15. Method Engineering: Engineering of Information Systems Development Methods and Tools

    OpenAIRE

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

  16. Automotive Stirling Engine Development Program

    Science.gov (United States)

    Nightingale, N.; Ernst, W.; Richey, A.; Simetkosky, M.; Smith, G.; Antonelli, M. (Editor)

    1983-01-01

    Mod I engine testing and test results, the test of a Mod I engine in the United States, Mod I engine characterization and analysis, Mod I Transient Test Bed fuel economy, Mod I-A engine performance are discussed. Stirling engine reference engine manufacturing and reduced size studies, components and subsystems, and the study and test of low-cost casting alloys are also covered. The overall program philosophy is outlined, and data and results are presented.

  17. Developing a stochastic traffic volume prediction model for public-private partnership projects

    Science.gov (United States)

    Phong, Nguyen Thanh; Likhitruangsilp, Veerasak; Onishi, Masamitsu

    2017-11-01

    Transportation projects require an enormous amount of capital investment resulting from their tremendous size, complexity, and risk. Due to the limitation of public finances, the private sector is invited to participate in transportation project development. The private sector can entirely or partially invest in transportation projects in the form of Public-Private Partnership (PPP) scheme, which has been an attractive option for several developing countries, including Vietnam. There are many factors affecting the success of PPP projects. The accurate prediction of traffic volume is considered one of the key success factors of PPP transportation projects. However, only few research works investigated how to predict traffic volume over a long period of time. Moreover, conventional traffic volume forecasting methods are usually based on deterministic models which predict a single value of traffic volume but do not consider risk and uncertainty. This knowledge gap makes it difficult for concessionaires to estimate PPP transportation project revenues accurately. The objective of this paper is to develop a probabilistic traffic volume prediction model. First, traffic volumes were estimated following the Geometric Brownian Motion (GBM) process. Monte Carlo technique is then applied to simulate different scenarios. The results show that this stochastic approach can systematically analyze variations in the traffic volume and yield more reliable estimates for PPP projects.

  18. Fair and efficient prices in traffic. Propositions on price policy for the sustainable development of traffic in Switzerland

    International Nuclear Information System (INIS)

    Maibach, M.; Ott, W.; Schreyer, Ch.

    2000-01-01

    Fair and efficient prices are a central topic in traffic policy, both at the EU level and in Switzerland. They should allow the efficient use of the infrastructure, set up fair terms of competition between road and rail traffic and reduce traffic loading. At the same time, they should also make it possible to finance traffic in a sustainable manner. One of the main directions of attack is letting those responsible pay the external costs which result from traffic jams, accidents and environmental pollution. With the planned introduction of the usage-dependent heavy traffic levy, Switzerland has made an important step in the direction of true cost-allocation for goods vehicles. As for the rest of road traffic, however, considerable external costs are still not covered. On the other hand, rail traffic is not able to cover its infrastructure costs itself in spite of compensation it receives for the provision of public services

  19. Fair and efficient prices in traffic. Propositions on price policy for the sustainable development of traffic in Switzerland

    International Nuclear Information System (INIS)

    Maibach, M.; Ott, W.; Schreyer, Ch.

    1999-01-01

    Fair and efficient prices are a central topic in traffic policy, both at the European Union level and in Switzerland. They should allow the efficient use of the infrastructure, set up fair terms of competition between road and rail traffic and reduce traffic loading. At the same time, they should also make it possible to finance traffic in a sustainable manner. One of the main directions of attack is letting those responsible pay the external costs which result from traffic jams, accidents and environmental pollution. With the planned introduction of the usage-dependent heavy traffic levy, Switzerland has made an important step in the direction of true cost-allocation for goods vehicles. As for the rest of road traffic, however, considerable external costs are still not covered. On the other hand, rail traffic is not able to cover its infrastructure costs itself in spite of compensation it receives for the provision of public services [de

  20. Development of a Traffic Management Decision Support Tool for Freeway Incident Traffic Management (FITM) Plan Deployment : Research Summary

    Science.gov (United States)

    2017-12-01

    In designing an effective traffic management plan for non-recurrent congestion, it is critical for responsible highway agencies to have some vital information, such as estimated incident duration, resulting traffic queues, and the expected delays. Ov...

  1. Systems Engineering Leadership Development: Advancing Systems Engineering Excellence

    Science.gov (United States)

    Hall, Phil; Whitfield, Susan

    2011-01-01

    This slide presentation reviews the Systems Engineering Leadership Development Program, with particular emphasis on the work being done in the development of systems engineers at Marshall Space Flight Center. There exists a lack of individuals with systems engineering expertise, in particular those with strong leadership capabilities, to meet the needs of the Agency's exploration agenda. Therefore there is a emphasis on developing these programs to identify and train systems engineers. The presentation reviews the proposed MSFC program that includes course work, and developmental assignments. The formal developmental programs at the other centers are briefly reviewed, including the Point of Contact (POC)

  2. Perspectives of ukrainian mechanical engineering development

    OpenAIRE

    Dyrda, E.; Schepetkova, A.; Galushko, O.

    2013-01-01

    Theses are devoted to problems and perspectives of Ukrainian mechanical engineering development. Role of mechanical engineering in national economy is described. Problems of mechanical engineering, such as losing the cometetive advantages, production decreasing, debts growing, ineffective assets structure, are investigated. Influence of European integration process on mechanical engineering enterprises is discussed.

  3. Creating a systems engineering approach for the manual on uniform traffic control devices.

    Science.gov (United States)

    2011-03-01

    The Manual on Uniform Traffic Control Devices (MUTCD) provides basic principles for use of traffic : control devices (TCD). However, most TCDs are not explicitly required, and the decision to use a given : TCD in a given situation is typically made b...

  4. Influence of Ergonomics on Traffic Safety and Economy Development

    Directory of Open Access Journals (Sweden)

    Teodor Perić

    2004-09-01

    Full Text Available As an interdisciplinary science, ergonomics needs to makethe operating of traffic safer, faster and more reliable, for thesake of higher profitability and generally improved economiceffects. This is achieved by adapting and shaping the workplace,machines, transport means, equipment, physical environment,working process etc. according to experience abouthuman anatomic physica~ sociologica~ intellectual and otherminimal, average or maximal capabilities. Therefore, it is necessaryto analyse ergonomics from the standpoint of better productivenessof humans, greater safety (comfort and security ingeneral.

  5. Influence of Ergonomics on Traffic Safety and Economy Development

    OpenAIRE

    Teodor Perić; Nada Štrumberger; Dean Perić

    2004-01-01

    As an interdisciplinary science, ergonomics needs to makethe operating of traffic safer, faster and more reliable, for thesake of higher profitability and generally improved economiceffects. This is achieved by adapting and shaping the workplace,machines, transport means, equipment, physical environment,working process etc. according to experience abouthuman anatomic physica~ sociologica~ intellectual and otherminimal, average or maximal capabilities. Therefore, it is necessaryto analyse ergo...

  6. Career Development in Nuclear Engineering

    International Nuclear Information System (INIS)

    Sibbens, G.

    2015-01-01

    In the eighties it was not common for girls to study engineering. But a few young girls have always been fascinated by science and technical applications and dared to go for a gender untypical education. What are these female engineers doing today? This paper describes the career development of a woman, who completed her Master of Science in Nuclear Engineering, found first a job in an international company as cooperator in the research group of radiation physics and later as head of technical support and quality assurance of medical systems and then succeeded in a competition to be recruited at the European Commission (EC). There she started as an assistant for the primary standardisation of radionuclides and high-resolution alpha-particle spectrometry including the preparation of radioactive sources in the radionuclide metrology sector at the Institute for Reference Materials and Measurements of the European Commission’s Joint Research Centre and consequently published her work in scientific journals. Today, 29 years later, I am the laboratory responsible for the preparation and characterisation of nuclear targets at EC-JRC-IRMM, leading a team that has unique know-how in the preparation of thin film deposits (called targets) tailor-made for nuclear physics measurements at the EC–JRC–IRMM and international accelerator sites. High quality measurements of nuclear data and materials are being asked for in the context of nuclear safety, minimisation of high level nuclear waste and safeguards and security. The different steps of my career development and the repeated process of managing learning, work, family and leisure are presented. The career path across different jobs and responsibilities and the career progress via a certification training programme are also explained to encourage the next generation of female professionals to continue playing a vital role in nuclear science and technology. (author)

  7. Development of Seasonal ARIMA Models for Traffic Noise Forecasting

    Directory of Open Access Journals (Sweden)

    Guarnaccia Claudio

    2017-01-01

    Full Text Available In this paper, a time series analysis approach is adopted to monitor and predict a traffic noise levels dataset, measured in a site of Messina, Italy. In general, acoustical noise shows a high prediction complexity, since its slope is strongly related to the variability of the sources and to intrinsic randomness. In the analysed site the predominant source is road traffic, that has a periodic and non-stationary behaviour. The study of the time evolution of this hazardous agent is very useful to assess the impact to human health and activities. The time series models adopted in this paper are of the stochastic seasonal ARIMA class; these types of model are based on the strong periodicity registered in the acoustical equivalent levels. The observed periodicity is related to the highly variability of urban traffic in the different days of the week. Three different seasonal ARIMA models are proposed and calibrated on a rich dataset of 800 sound level measurements. The predictive capabilities of these techniques are encouraging. The implemented models show a good forecasting performances in terms of low residuals, i.e. difference between observed and estimated noise values. The residuals are analysed by means of statistical indexes, plots and tests.

  8. Development of an Engineering Soil Database

    Science.gov (United States)

    2017-12-27

    ER D C TR 1 7- 15 Rapid Airfield Damage Recovery (RADR) Program Development of an Engineering Soil Database En gi ne er R es ea rc...distribution is unlimited. The US Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and environmental...challenges. ERDC develops innovative solutions in civil and military engineering , geospatial sciences, water resources, and environmental sciences

  9. U18 : Traffic signal safety (phase B).

    Science.gov (United States)

    2009-08-01

    Efficiently scheduling traffic, particularly heavy vehicles, remains a key challenge in transportation engineering. This project has focused on the development of a novel trafficsignal-control methodology to improve the safety of heavy vehicles on...

  10. Developing a Minimum Data Set for an Information Management System to Study Traffic Accidents in Iran.

    Science.gov (United States)

    Mohammadi, Ali; Ahmadi, Maryam; Gharagozlu, Alireza

    2016-03-01

    Each year, around 1.2 million people die in the road traffic incidents. Reducing traffic accidents requires an exact understanding of the risk factors associated with traffic patterns and behaviors. Properly analyzing these factors calls for a comprehensive system for collecting and processing accident data. The aim of this study was to develop a minimum data set (MDS) for an information management system to study traffic accidents in Iran. This descriptive, cross-sectional study was performed in 2014. Data were collected from the traffic police, trauma centers, medical emergency centers, and via the internet. The investigated resources for this study were forms, databases, and documents retrieved from the internet. Forms and databases were identical, and one sample of each was evaluated. The related internet-sourced data were evaluated in their entirety. Data were collected using three checklists. In order to arrive at a consensus about the data elements, the decision Delphi technique was applied using questionnaires. The content validity and reliability of the questionnaires were assessed by experts' opinions and the test-retest method, respectively. An (MDS) of a traffic accident information management system was assigned to three sections: a minimum data set for traffic police with six classes, including 118 data elements; a trauma center with five data classes, including 57 data elements; and a medical emergency center, with 11 classes, including 64 data elements. Planning for the prevention of traffic accidents requires standardized data. As the foundation for crash prevention efforts, existing standard data infrastructures present policymakers and government officials with a great opportunity to strengthen and integrate existing accident information systems to better track road traffic injuries and fatalities.

  11. Developing a Measure of Traffic Calming Associated with Elementary School Students’ Active Transport

    OpenAIRE

    Nicholson, Lisa M.; Turner, Lindsey; Slater, Sandy J.; Abuzayd, Haytham; Chriqui, Jamie F.; Chaloupka, Frank

    2014-01-01

    The objective of this study is to develop a measure of traffic calming with nationally available GIS data from NAVTEQ and to validate the traffic calming index with the percentage of children reported by school administrators as walking or biking to school, using data from a nationally representative sample of elementary schools in 2006-2010. Specific models, with and without correlated errors, examined associations of objective GIS measures of the built environment, nationally available from...

  12. Educating Civil Engineers for Developing Countries

    Science.gov (United States)

    Stanley, D.

    1974-01-01

    Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

  13. Communications System Architecture Development for Air Traffic Management and Aviation Weather Information Dissemination

    Science.gov (United States)

    Gallagher, Seana; Olson, Matt; Blythe, Doug; Heletz, Jacob; Hamilton, Griff; Kolb, Bill; Homans, Al; Zemrowski, Ken; Decker, Steve; Tegge, Cindy

    2000-01-01

    This document is the NASA AATT Task Order 24 Final Report. NASA Research Task Order 24 calls for the development of eleven distinct task reports. Each task was a necessary exercise in the development of comprehensive communications systems architecture (CSA) for air traffic management and aviation weather information dissemination for 2015, the definition of the interim architecture for 2007, and the transition plan to achieve the desired End State. The eleven tasks are summarized along with the associated Task Order reference. The output of each task was an individual task report. The task reports that make up the main body of this document include Task 5, Task 6, Task 7, Task 8, Task 10, and Task 11. The other tasks provide the supporting detail used in the development of the architecture. These reports are included in the appendices. The detailed user needs, functional communications requirements and engineering requirements associated with Tasks 1, 2, and 3 have been put into a relational database and are provided electronically.

  14. Development of Engine Loads Methodology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR seeks to improve the definition of design loads for rocket engine components such that higher performing, lighter weight engines can be developed more...

  15. Campaign Quality Gap: Developing Strategic Engineering Competency

    National Research Council Canada - National Science Library

    Wilson, Jr, Roger A

    2007-01-01

    Recent policy developments in the Department of Defense (DOD) impose new and significant challenges for the Nation's strategic engineering directorate, the US Army Corps of Engineers (USACE). DOD Directive...

  16. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  17. Cryogenic rocket engine development at Delft aerospace rocket engineering

    NARCIS (Netherlands)

    Wink, J; Hermsen, R.; Huijsman, R; Akkermans, C.; Denies, L.; Barreiro, F.; Schutte, A.; Cervone, A.; Zandbergen, B.T.C.

    2016-01-01

    This paper describes the current developments regarding cryogenic rocket engine technology at Delft Aerospace Rocket Engineering (DARE). DARE is a student society based at Delft University of Technology with the goal of being the first student group in the world to launch a rocket into space. After

  18. Hydrogen hybrid vehicle engine development: Experimental program

    Energy Technology Data Exchange (ETDEWEB)

    Van Blarigan, P. [Sandia National Lab., Livermore, CA (United States)

    1995-09-01

    A hydrogen fueled engine is being developed specifically for the auxiliary power unit (APU) in a series type hybrid vehicle. Hydrogen is different from other internal combustion (IC) engine fuels, and hybrid vehicle IC engine requirements are different from those of other IC vehicle engines. Together these differences will allow a new engine design based on first principles that will maximize thermal efficiency while minimizing principal emissions. The experimental program is proceeding in four steps: (1) Demonstration of the emissions and the indicated thermal efficiency capability of a standard CLR research engine modified for higher compression ratios and hydrogen fueled operation. (2) Design and test a new combustion chamber geometry for an existing single cylinder research engine, in an attempt to improve on the baseline indicated thermal efficiency of the CLR engine. (3) Design and build, in conjunction with an industrial collaborator, a new full scale research engine designed to maximize brake thermal efficiency. Include a full complement of combustion diagnostics. (4) Incorporate all of the knowledge thus obtained in the design and fabrication, by an industrial collaborator, of the hydrogen fueled engine for the hybrid vehicle power train illustrator. Results of the CLR baseline engine testing are presented, as well as preliminary data from the new combustion chamber engine. The CLR data confirm the low NOx produced by lean operation. The preliminary indicated thermal efficiency data from the new combustion chamber design engine show an improvement relative to the CLR engine. Comparison with previous high compression engine results shows reasonable agreement.

  19. The Development of the Multi-Center Traffic Management Advisor (MCTMA): Traffic Flow Management Research in a Multi-Facility Environment

    Science.gov (United States)

    Lee, Katharine K.; Davis, Thomas J.; Levin, Kerry M.; Rowe, Dennis W.

    2001-01-01

    The Traffic Management Advisor (TMA) is a decision-support tool for traffic managers and air traffic controllers that provides traffic flow visualization and other flow management tools. TMA creates an efficiently sequenced and safely spaced schedule for arrival traffic that meets but does not exceed specified airspace system constraints. TMA is being deployed at selected facilities throughout the National Airspace System in the US as part of the FAA's Free Flight Phase 1 program. TMA development and testing, and its current deployment, focuses on managing the arrival capacity for single major airports within single terminal areas and single en route centers. The next phase of development for this technology is the expansion of the TMA capability to complex facilities in which a terminal area or airport is fed by multiple en route centers, thus creating a multicenter TMA functionality. The focus of the multi-center TMA (McTMA) development is on the busy facilities in the Northeast comdor of the US. This paper describes the planning and development of McTMA and the challenges associated with adapting a successful traffic flow management tool for a very complex airspace.

  20. Design and development of an improved traffic light control system using hybrid lighting system

    Directory of Open Access Journals (Sweden)

    Michael Osigbemeh

    2017-02-01

    Full Text Available The deployment of light emitting diodes (LEDs based traffic system control created the problem of dim displays when ambient light is similar to traffic lights. It causes some drivers' disability of seeing and obeying traffic signs. This makes drivers violate traffic rules. In this paper, an attempt to use hybrid lighting technology to mitigate this problem was developed. Incandescent lightings with deployed halogen bulbs provided an instantaneous source of highly efficacious illumination which is brighter than the drivers' ambient lights (both daylight, electrical lights and their reflections, which can help drivers get access to enough warning and help them initiate traffic safety warning as necessary. The halogen lightings also offered the required high current draw needed in electrical circuitry to help brighten the LED displays. The problem of heat generated was eliminated by aerating the T-junction traffic light control unit designed for this technology. The result of hybrid lighting system design was found to be high luminosity and capability of gaining driver attention in real-time. It also allowed enhanced sign's image detection and processing for smart based technologies by providing the “light punch” needed for a wide range of visual concerns.

  1. [Development of domain specific search engines].

    Science.gov (United States)

    Takai, T; Tokunaga, M; Maeda, K; Kaminuma, T

    2000-01-01

    As cyber space exploding in a pace that nobody has ever imagined, it becomes very important to search cyber space efficiently and effectively. One solution to this problem is search engines. Already a lot of commercial search engines have been put on the market. However these search engines respond with such cumbersome results that domain specific experts can not tolerate. Using a dedicate hardware and a commercial software called OpenText, we have tried to develop several domain specific search engines. These engines are for our institute's Web contents, drugs, chemical safety, endocrine disruptors, and emergent response for chemical hazard. These engines have been on our Web site for testing.

  2. Sustainable Development in Engineering Education

    Science.gov (United States)

    Taoussanidis, Nikolaos N.; Antoniadou, Myrofora A.

    2006-01-01

    The principles and practice of environmentally and socially sustainable engineering are in line with growing community expectations and the strengthening voice of civil society in engineering interventions. Pressures towards internationalization and globalization are reflected in new course accreditation criteria and higher education structures.…

  3. Engineering Research in Irish Economic Development

    Science.gov (United States)

    Kelly, John

    2011-01-01

    This article summarizes the main findings and recommendations of a report published in December 2010 by the Irish Academy of Engineering (IAE). The report, representing the views of a committee of distinguished Irish engineers from a wide range of disciplines, addresses the role of engineering research in Ireland's economic development and the…

  4. How to Develop an Engineering Design Task

    Science.gov (United States)

    Dankenbring, Chelsey; Capobianco, Brenda M.; Eichinger, David

    2014-01-01

    In this article, the authors provide an overview of engineering and the engineering design process, and describe the steps they took to develop a fifth grade-level, standards-based engineering design task titled "Getting the Dirt on Decomposition." Their main goal was to focus more on modeling the discrete steps they took to create and…

  5. Engineering Social Justice into Traffic Control for Self-Driving Vehicles?

    Science.gov (United States)

    Mladenovic, Milos N; McPherson, Tristram

    2016-08-01

    The convergence of computing, sensing, and communication technology will soon permit large-scale deployment of self-driving vehicles. This will in turn permit a radical transformation of traffic control technology. This paper makes a case for the importance of addressing questions of social justice in this transformation, and sketches a preliminary framework for doing so. We explain how new forms of traffic control technology have potential implications for several dimensions of social justice, including safety, sustainability, privacy, efficiency, and equal access. Our central focus is on efficiency and equal access as desiderata for traffic control design. We explain the limitations of conventional traffic control in meeting these desiderata, and sketch a preliminary vision for a next-generation traffic control tailored to address better the demands of social justice. One component of this vision is cooperative, hierarchically distributed self-organization among vehicles. Another component of this vision is a priority system enabling selection of priority levels by the user for each vehicle trip in the network, based on the supporting structure of non-monetary credits.

  6. Development of maintenance engineering system

    International Nuclear Information System (INIS)

    1995-03-01

    Department of JMTR project has developed the Maintenance Engineering System which evaluates the aging tendency of the facilities. The system is used for the repair plan and the replace period of parts, components, equipments or facilities. The system has the data-base which consists of the check data, the inspection data, the trouble data and the repair data at the JMTR since the virgin criticality. The system is utilized maintenance works and concludes the maintenance procedures for the failure components, equipments and facilities. This system has the following characteristics. (1) Anybody can operate the system as easily as word processor. (2) Data are put into by man-machine-interface. (3) The data sheets are with light color and the recognizable arrangements. (4) The system is cost-efficient using commercial personal computers and applications. The research card and the layouts of the input data sheet had been formatted. Data has been begun to be put into the system and to check its functions. The result demonstrates that the system is available for preventive maintenance at the JMTR. (author)

  7. ICF ETF and its engineering development requirements

    International Nuclear Information System (INIS)

    Blink, J.A.; Allen, W.O.; Billman, K.

    1980-10-01

    Inertial confinement fusion driver development and ICF target physics are being intensively explored both theoretically and experimentally. However, engineering considerations of harnessing the fusion energy pulses that are an ultimate product and goal of the ICF physics program are only being addressed on a small scale. Experience with development of other new technologies indicates that engineering development time will be substantial for ICF energy converters. The authors met at Livermore in July 1980 to form an ICF Reactor Technology Working Group to address this issue. This paper outlines the current state of planning for an ICF Engineering Test Facility (ETF) and the engineering development that must precede it

  8. Model based development of engine control algorithms

    NARCIS (Netherlands)

    Dekker, H.J.; Sturm, W.L.

    1996-01-01

    Model based development of engine control systems has several advantages. The development time and costs are strongly reduced because much of the development and optimization work is carried out by simulating both engine and control system. After optimizing the control algorithm it can be executed

  9. Development of natural gas rotary engines

    Science.gov (United States)

    Mack, J. R.

    1991-08-01

    Development of natural gas-fueled rotary engines was pursued on the parallel paths of converted Mazda automotive engines and of establishing technology and demonstration of a test model of a larger John Deer Technologies Incorporated (JDTI) rotary engine with power capability of 250 HP per power section for future production of multi-rotor engines with power ratings 250, 500, and 1000 HP and upward. Mazda engines were converted to natural gas and were characterized by a laboratory which was followed by nearly 12,000 hours of testing in three different field installations. To develop technology for the larger JDTI engine, laboratory and engine materials testing was accomplished. Extensive combustion analysis computer codes were modified, verified, and utilized to predict engine performance, to guide parameters for actual engine design, and to identify further improvements. A single rotor test engine of 5.8 liter displacement was designed for natural gas operation based on the JDTI 580 engine series. This engine was built and tested. It ran well and essentially achieved predicted performance. Lean combustion and low NOW emission were demonstrated.

  10. Method for predicting future developments of traffic noise in urban areas in Europe

    NARCIS (Netherlands)

    Salomons, E.; Hout, D. van den; Janssen, S.; Kugler, U.; MacA, V.

    2010-01-01

    Traffic noise in urban areas in Europe is a major environmental stressor. In this study we present a method for predicting how environmental noise can be expected to develop in the future. In the project HEIMTSA scenarios were developed for all relevant environmental stressors to health, for all

  11. SYSTEM ANALYSIS OF MAJOR TRENDS IN DEVELOPMENT OF ADAPTIVE TRAFFIC FLOW MANAGEMENT METHODS

    Directory of Open Access Journals (Sweden)

    A. N. Klimovich

    2017-01-01

    Full Text Available Adaptive algorithms, which current traffic systems are based on, exist for many decades. Information technologies have developed significantly over this period and it makes more relevant their application in the field of transport. This paper analyses modern trends in the development of adaptive traffic flow control methods. Reviewed the most perspective directions in the field of intelligent transport systems, such as high-speed wireless communication between vehicles and road infrastructure based on such technologies as DSRC and WAVE, traffic jams prediction having such features as traffic flow information, congestion, velocity of vehicles using machine learning, fuzzy logic rules and genetic algorithms, application of driver assistance systems to increase vehicle’s autonomy. Advantages of such technologies in safety, efficiency and usability of transport are shown. Described multi-agent approach, which uses V2I-communication between vehicles and intersection controller to improve efficiency of control due to more complete traffic flow information and possibility to give orders to separate vehicles. Presented number of algorithms which use such approach to create new generation of adaptive transport systems.

  12. The Development of Precise Engineering Surveying Technology

    Directory of Open Access Journals (Sweden)

    LI Guangyun

    2017-10-01

    Full Text Available With the construction of big science projects in China, the precise engineering surveying technology developed rapidly in the 21th century. Firstly, the paper summarized up the current development situation for the precise engineering surveying instrument and theory. Then the three typical cases of the precise engineering surveying practice such as accelerator alignment, industry measurement and high-speed railway surveying technology are focused.

  13. Interdisciplinary Integrated Engineering Development Course in HITACHI

    Science.gov (United States)

    Ojima, Masahiro

    As an example of interdisciplinary education for engineers in private companies, IED (Integrated Engineering Development) course at HITACHI Ltd. is presented. To help 30 years old or so promising engineers create a new product based on a new technology, one year term course is designed for four types of engineers; mechanical, electric & electronic, information software, and digital systems. Each course has core basic technologies plus related supplementary subjects to promote an interdisciplinary integrated engineer. Not only lectures given by university professors but heavy duty home work is also given by senior engineers of HITACHI to make them apply basic theory to practical problems. Furthermore, self development planning, leadership development program and technology-marketing project are introduced to promote human skills and business sense needed for technology leaders in company.

  14. Developing a Measure of Traffic Calming Associated with Elementary School Students’ Active Transport

    Science.gov (United States)

    Nicholson, Lisa M.; Turner, Lindsey; Slater, Sandy J.; Abuzayd, Haytham; Chriqui, Jamie F.; Chaloupka, Frank

    2014-01-01

    The objective of this study is to develop a measure of traffic calming with nationally available GIS data from NAVTEQ and to validate the traffic calming index with the percentage of children reported by school administrators as walking or biking to school, using data from a nationally representative sample of elementary schools in 2006-2010. Specific models, with and without correlated errors, examined associations of objective GIS measures of the built environment, nationally available from NAVTEQ, with the latent construct of traffic calming. The best fit model for the latent traffic calming construct was determined to be a five factor model including objective measures of intersection density, count of medians/dividers, count of low mobility streets, count of roundabouts, and count of on-street parking availability, with no correlated errors among items. This construct also proved to be a good fit for the full measurement model when the outcome measure of percentage of students walking or biking to school was added to the model. The traffic calming measure was strongly, significantly, and positively correlated with the percentage of students reported as walking or biking to school. Applicability of results to public health and transportation policies and practices are discussed. PMID:25506255

  15. Developing a Measure of Traffic Calming Associated with Elementary School Students' Active Transport.

    Science.gov (United States)

    Nicholson, Lisa M; Turner, Lindsey; Slater, Sandy J; Abuzayd, Haytham; Chriqui, Jamie F; Chaloupka, Frank

    2014-12-01

    The objective of this study is to develop a measure of traffic calming with nationally available GIS data from NAVTEQ and to validate the traffic calming index with the percentage of children reported by school administrators as walking or biking to school, using data from a nationally representative sample of elementary schools in 2006-2010. Specific models, with and without correlated errors, examined associations of objective GIS measures of the built environment, nationally available from NAVTEQ, with the latent construct of traffic calming. The best fit model for the latent traffic calming construct was determined to be a five factor model including objective measures of intersection density, count of medians/dividers, count of low mobility streets, count of roundabouts, and count of on-street parking availability, with no correlated errors among items. This construct also proved to be a good fit for the full measurement model when the outcome measure of percentage of students walking or biking to school was added to the model. The traffic calming measure was strongly, significantly, and positively correlated with the percentage of students reported as walking or biking to school. Applicability of results to public health and transportation policies and practices are discussed.

  16. Automotive Stirling engine development program: A success

    Science.gov (United States)

    Tabata, W. K.

    1987-01-01

    The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

  17. Product design and development engineering

    International Nuclear Information System (INIS)

    Lee, Kookhwan

    2008-01-01

    This book gives design of molded plastics, design of press product, design of die casting products, the application of communication terminal design, application and design of machine elements(screw, spring, bearing, gear, retaining ridge, drawing standards, KS and JIS material marks list), 3D CAD, concurrent engineering of product design, creative concept design.

  18. Creativity Development for Engineering Students

    DEFF Research Database (Denmark)

    Zhou, Chunfang; Holgaard, Jette Egelund; Kolmos, Anette

    2010-01-01

    In this paper we outline two approaches to enhance creative skills in a PBL environment at Aalborg University, Denmark. The two strategies are respectively characterized by 1) integrating creativity training into curriculum and 2) introducing real life engineering projects for students. Two cases...

  19. MaTech - the BMFT ''new materials'' materials research program - 1994 annual report about new materials for innovative information technology, energy technology, traffic engineering, medical engineering and production engineering applications, and about general materials research and new fields

    International Nuclear Information System (INIS)

    Lillack, D.; Gilbert, I.; Runte, S.

    1995-01-01

    This annual report gives a survey of projects supported within the framework of the Matfo and Ma-Tech programs. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities in the year 1994. (MM) [de

  20. 11th Traffic and Granular Flow Conference

    CERN Document Server

    Daamen, Winnie

    2016-01-01

    The Conference on Traffic and Granular Flow brings together international researchers from different fields ranging from physics to computer science and engineering to discuss the latest developments in traffic-related systems. Originally conceived to facilitate new ideas by considering the similarities of traffic and granular flow, TGF'15, organised by Delft University of Technology, now covers a broad range of topics related to driven particle and transport systems. Besides the classical topics of granular flow and highway traffic, its scope includes data transport (Internet traffic), pedestrian and evacuation dynamics, intercellular transport, swarm behaviour and the collective dynamics of other biological systems. Recent advances in modelling, computer simulation and phenomenology are presented, and prospects for applications, for example to traffic control, are discussed. The conference explores the interrelations between the above-mentioned fields and offers the opportunity to stimulate interdisciplinar...

  1. Light-duty diesel engine development status and engine needs

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    This report reviews, assesses, and summarizes the research and development status of diesel engine technology applicable to light-duty vehicles. In addition, it identifies specific basic and applied research and development needs in light-duty diesel technology and related health areas where initial or increased participation by the US Government would be desirable. The material presented in this report updates information provided in the first diesel engine status report prepared by the Aerospace Corporation for the Department of Energy in September, 1978.

  2. Membrane Engineering for Sustainable Development: A Perspective

    OpenAIRE

    Aamer Ali; Enrico Drioli; Francesca Macedonio

    2017-01-01

    Membrane engineering can offer an important contribution in realizing sustainable industrial development. It provides opportunities to redesign the conventional process of engineering in the logic of Process Intensification. Relatively new and less exploited membrane operations offer innovative solutions to the scarcity of raw materials, freshwater and energy. Here, we identify the most interesting aspects of membrane engineering in some strategic industrial sectors. Several cases of either s...

  3. Classification of Automated Search Traffic

    Science.gov (United States)

    Buehrer, Greg; Stokes, Jack W.; Chellapilla, Kumar; Platt, John C.

    As web search providers seek to improve both relevance and response times, they are challenged by the ever-increasing tax of automated search query traffic. Third party systems interact with search engines for a variety of reasons, such as monitoring a web site’s rank, augmenting online games, or possibly to maliciously alter click-through rates. In this paper, we investigate automated traffic (sometimes referred to as bot traffic) in the query stream of a large search engine provider. We define automated traffic as any search query not generated by a human in real time. We first provide examples of different categories of query logs generated by automated means. We then develop many different features that distinguish between queries generated by people searching for information, and those generated by automated processes. We categorize these features into two classes, either an interpretation of the physical model of human interactions, or as behavioral patterns of automated interactions. Using the these detection features, we next classify the query stream using multiple binary classifiers. In addition, a multiclass classifier is then developed to identify subclasses of both normal and automated traffic. An active learning algorithm is used to suggest which user sessions to label to improve the accuracy of the multiclass classifier, while also seeking to discover new classes of automated traffic. Performance analysis are then provided. Finally, the multiclass classifier is used to predict the subclass distribution for the search query stream.

  4. Developing marketing system for civil engineering firm

    Directory of Open Access Journals (Sweden)

    Jovićević Ratko

    2006-01-01

    Full Text Available In this paper intention was to reveal insufficient connection between theory and practice in civil engineering as indispose condition for more efficient solving problems which products unstable environment of engineering firms. Successful connection between theory and practice, when we talk about marketing in civil engineering, did not develop at satisfied way. Civil engineering is, in aspect of implementation of modern philosophy of marketing, in big residue related to the other spices of economy. In that order we want to appoint on possibility to resolve this discrepancy.

  5. Development of multilayer constructs for tissue engineering

    NARCIS (Netherlands)

    Bettahalli, N. M. S.; Groen, N.; Steg, H.; Unadkat, H.; de Boer, J.; van Blitterswijk, C. A.; Wessling, M.; Stamatialis, D.

    The rapidly developing field of tissue engineering produces living substitutes that restore, maintain or improve the function of tissues or organs. In contrast to standard therapies, the engineered products become integrated within the patient, affording a potentially permanent and specific cure of

  6. Development of multilayer constructs for tissue engineering

    NARCIS (Netherlands)

    Bettahalli Narasimha, M.S.; Groen, N.; Steg, H.; Unadkat, H.V.; de Boer, Jan; van Blitterswijk, Clemens; Wessling, Matthias; Stamatialis, Dimitrios

    2014-01-01

    The rapidly developing field of tissue engineering produces living substitutes that restore, maintain or improve the function of tissues or organs. In contrast to standard therapies, the engineered products become integrated within the patient, affording a potentially permanent and specific cure of

  7. Integrated diesel engine NOx reduction technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, J.; Zhu, J.; Savonen, C.L. [Detroit Diesel Corp., MI (United States); Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J. [Allied Signal Environmental Catalysts, Tulsa, OK (United States)

    1997-12-31

    The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.

  8. TRAFFIC SIMULATION FOR MIXED TRAFFIC SYSTEMS

    African Journals Online (AJOL)

    EGETE

    2012-05-04

    May 4, 2012 ... Traffic problem is classified into single and mixed, especially in most developing countries, where motorbikes are ..... The traffic light control system presented by its location on ... multi-destination dynamic routing and real-time.

  9. Developing a New HSR Switching Node (SwitchBox for Improving Traffic Performance in HSR Networks

    Directory of Open Access Journals (Sweden)

    Nguyen Xuan Tien

    2016-01-01

    Full Text Available High availability is crucial for industrial Ethernet networks as well as Ethernet-based control systems such as automation networks and substation automation systems (SAS. Since standard Ethernet does not support fault tolerance capability, the high availability of Ethernet networks can be increased by using redundancy protocols. Various redundancy protocols for Ethernet networks have been developed and standardized, such as rapid spanning tree protocol (RSTP, media redundancy protocol (MRP, parallel redundancy protocol (PRP, high-availability seamless redundancy (HSR and others. RSTP and MRP have switchover delay drawbacks. PRP provides zero recovery time, but requires a duplicate network infrastructure. HSR operation is similar to PRP, but HSR uses a single network. However, the standard HSR protocol is mainly applied to ring-based topologies and generates excessively unnecessary redundant traffic in the network. In this paper, we develop a new switching node for the HSR protocol, called SwitchBox, which is used in HSR networks in order to support any network topology and significantly reduce redundant network traffic, including unicast, multicast and broadcast traffic, compared with standard HSR. By using the SwitchBox, HSR not only provides seamless communications with zero switchover time in case of failure, but it is also easily applied to any network topology and significantly reduces unnecessary redundant traffic in HSR networks.

  10. Framework for Traffic Congestion Management

    Directory of Open Access Journals (Sweden)

    Mahmud Hassan TALUKDAR

    2013-06-01

    Full Text Available Traffic Congestion is one of many serious global problems in all great cities resulted from rapid urbanization which always exert negative externalities upon society. The solution of traffic congestion is highly geocentric and due to its heterogeneous nature, curbing congestion is one of the hard tasks for transport planners. It is not possible to suggest unique traffic congestion management framework which could be absolutely applied for every great cities. Conversely, it is quite feasible to develop a framework which could be used with or without minor adjustment to deal with congestion problem. So, the main aim of this paper is to prepare a traffic congestion mitigation framework which will be useful for urban planners, transport planners, civil engineers, transport policy makers, congestion management researchers who are directly or indirectly involved or willing to involve in the task of traffic congestion management. Literature review is the main source of information of this study. In this paper, firstly, traffic congestion is defined on the theoretical point of view and then the causes of traffic congestion are briefly described. After describing the causes, common management measures, using world- wide, are described and framework for supply side and demand side congestion management measures are prepared.

  11. The development of a method to measure speed adaptation to traffic complexity: Identifying novice, unsafe, and overconfident drivers.

    NARCIS (Netherlands)

    Craen, S. de Twisk, D.A.M. Hagenzieker, M.P. Elffers, H. & Brookhuis, K.A.

    2008-01-01

    To monitor novice driver performance in the first years of solo driving, a test aimed at assessing speed adaptation to the traffic situation was developed and evaluated. The Adaptation Test consisted of 18 traffic scenes presented in two (almost) identical photographs, which differed in one single

  12. The development of a method to measure speed adaptation to traffic complexity : Identifying novice, unsafe, and overconfident drivers

    NARCIS (Netherlands)

    de Craen, Saskia; Twisk, Divera A. M.; Hagenzieker, Marjan P.; Elffers, Henk; Brookhuis, Karel A.

    To monitor novice driver performance in the first years of solo driving, a test aimed at assessing speed adaptation to the traffic situation was developed and evaluated. The Adaptation Test consisted of 18 traffic scenes presented in two (almost) identical photographs, which differed in one single

  13. Engineering: issues, challenges and opportunities for development

    CSIR Research Space (South Africa)

    Wall, K

    2010-10-01

    Full Text Available to contribute to greater international understanding of the issues, challenges and opportunities facing engineering, with a particular focus on contributions of our discipline to sustainable development. The Report, one of the most cost-effective reports UNESCO...

  14. Local Border Traffic as a Form of Visa Liberalisation and Territorial Development

    Directory of Open Access Journals (Sweden)

    Kretinin G.

    2014-12-01

    Full Text Available This article addresses the issue of visa liberalisation between Russia and the European Union, which constitutes a key aspect of the parties’ diplomatic cooperation. This work sets out to identify the main results of Russia/EU cooperation. The authors have conducted a brief historical analysis of this area of relations. The visa “regionalisation” is considered in the context of identifying the key actors of the EU — Russia negotiations: the Kaliningrad region, Germany, Poland, and Lithuania. In their analysis, the authors rely mostly on primary sources: intergovernmental agreements on simplified border traffic, border-crossing statistics for the Kaliningrad region in the framework of the local border traffic, expert interviews, and related analytic reports. Specifically, local border traffic is viewed as the most effective form of interaction in the field of visa regime simplification and border territory development. An assessment of the positions of key negotiators shows that local border traffic between the Kaliningrad region of Russia and the Polish border voivodeships is a success, which stresses the need for a prompt transition to a visa-free regime with the EU.

  15. Inside the Mechanics of Network Development: How Competition and Strategy Reorganize European Air Traffic

    Science.gov (United States)

    Huber, Hans

    2006-01-01

    Air transport forms complex networks that can be measured in order to understand its structural characteristics and functional properties. Recent models for network growth (i.e., preferential attachment, etc.) remain stochastic and do not seek to understand other network-specific mechanisms that may account for their development in a more microscopic way. Air traffic is made up of many constituent airlines that are either privately or publicly owned and that operate their own networks. They follow more or less similar business policies each. The way these airline networks organize among themselves into distinct traffic distributions reveals complex interaction among them, which in turn can be aggregated into larger (macro-) traffic distributions. Our approach allows for a more deterministic methodology that will assess the impact of airline strategies on the distinct distributions for air traffic, particularly inside Europe. One key question this paper is seeking to answer is whether there are distinct patterns of preferential attachment for given classes of airline networks to distinct types of European airports. Conclusions about the advancing degree of concentration in this industry and the airline operators that accelerate this process can be drawn.

  16. Economic development and road traffic fatalities in two neighbouring African nations

    Directory of Open Access Journals (Sweden)

    Douglas J. Wiebe

    2016-06-01

    Conclusion: Road crash fatalities increased in recent decades in both Zambia and Botswana. But the rapid economic development in Botswana over this time period appears to have driven proportionate road traffic fatality increases. There are opportunities for newly emerging economies such as Zambia, Angola, and others to learn from the Botswana experience. Evidence-based investments in road safety interventions should be concomitant with economic development.

  17. Assessment and Development of Engineering Design Processes

    DEFF Research Database (Denmark)

    Ulrikkeholm, Jeppe Bjerrum

    , the engineering companies need to have efficient engineering design processes in place, so they can design customised product variants faster and more efficiently. It is however not an easy task to model and develop such processes. To conduct engineering design is often a highly iterative, illdefined and complex...... the process can be fully understood and eventually improved. Taking its starting point in this proposition, the outcome of the research is an operational 5-phased procedure for assessing and developing engineering design processes through integrated modelling of product and process, designated IPPM......, and eventually the results are discussed, overall conclusions are made and future research is proposed. The results produced throughout the research project are developed in close collaboration with the Marine Low Speed business unit within the company MAN Diesel & Turbo. The business unit is the world market...

  18. Alternative method of highway traffic safety analysis for developing countries using delphi technique and Bayesian network.

    Science.gov (United States)

    Mbakwe, Anthony C; Saka, Anthony A; Choi, Keechoo; Lee, Young-Jae

    2016-08-01

    Highway traffic accidents all over the world result in more than 1.3 million fatalities annually. An alarming number of these fatalities occurs in developing countries. There are many risk factors that are associated with frequent accidents, heavy loss of lives, and property damage in developing countries. Unfortunately, poor record keeping practices are very difficult obstacle to overcome in striving to obtain a near accurate casualty and safety data. In light of the fact that there are numerous accident causes, any attempts to curb the escalating death and injury rates in developing countries must include the identification of the primary accident causes. This paper, therefore, seeks to show that the Delphi Technique is a suitable alternative method that can be exploited in generating highway traffic accident data through which the major accident causes can be identified. In order to authenticate the technique used, Korea, a country that underwent similar problems when it was in its early stages of development in addition to the availability of excellent highway safety records in its database, is chosen and utilized for this purpose. Validation of the methodology confirms the technique is suitable for application in developing countries. Furthermore, the Delphi Technique, in combination with the Bayesian Network Model, is utilized in modeling highway traffic accidents and forecasting accident rates in the countries of research. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Biomedical engineering for health research and development.

    Science.gov (United States)

    Zhang, X-Y

    2015-01-01

    Biomedical engineering is a new area of research in medicine and biology, providing new concepts and designs for the diagnosis, treatment and prevention of various diseases. There are several types of biomedical engineering, such as tissue, genetic, neural and stem cells, as well as chemical and clinical engineering for health care. Many electronic and magnetic methods and equipments are used for the biomedical engineering such as Computed Tomography (CT) scans, Magnetic Resonance Imaging (MRI) scans, Electroencephalography (EEG), Ultrasound and regenerative medicine and stem cell cultures, preparations of artificial cells and organs, such as pancreas, urinary bladders, liver cells, and fibroblasts cells of foreskin and others. The principle of tissue engineering is described with various types of cells used for tissue engineering purposes. The use of several medical devices and bionics are mentioned with scaffold, cells and tissue cultures and various materials are used for biomedical engineering. The use of biomedical engineering methods is very important for the human health, and research and development of diseases. The bioreactors and preparations of artificial cells or tissues and organs are described here.

  20. Preprint WebVRGIS Based Traffic Analysis and Visualization System

    OpenAIRE

    Li, Xiaoming; Lv, Zhihan; Wang, Weixi; Zhang, Baoyun; Hu, Jinxing; Yin, Ling; Feng, Shengzhong

    2015-01-01

    This is the preprint version of our paper on Advances in Engineering Software. With several characteristics, such as large scale, diverse predictability and timeliness, the city traffic data falls in the range of definition of Big Data. A Virtual Reality GIS based traffic analysis and visualization system is proposed as a promising and inspiring approach to manage and develop traffic big data. In addition to the basic GIS interaction functions, the proposed system also includes some intellige...

  1. Comparative case study on website traffic generated by search engine optimisation and a pay-per-click campaign, versus marketing expenditure

    Directory of Open Access Journals (Sweden)

    Wouter T. Kritzinger

    2015-09-01

    Full Text Available Background: No empirical work was found on how marketing expenses compare when used solely for either the one or the other of the two main types of search engine marketing. Objectives: This research set out to determine how the results of the implementation of a pay-per-click campaign compared to those of a search engine optimisation campaign, given the same website and environment. At the same time, the expenses incurred on both these marketing methods were recorded and compared. Method: The active website of an existing, successful e-commerce concern was used as platform. The company had been using pay-per-click only for a period, whilst traffic was monitored. This system was decommissioned on a particular date and time, and an alternative search engine optimisation system was started at the same time. Again, both traffic and expenses were monitored. Results: The results indicate that the pay-per-click system did produce favourable results, but on the condition that a monthly fee has to be set aside to guarantee consistent traffic. The implementation of search engine optimisation required a relatively large investment at the outset, but it was once-off. After a drop in traffic owing to crawler visitation delays, the website traffic bypassed the average figure achieved during the pay-per-click period after a little over three months, whilst the expenditure crossed over after just six months. Conclusion: Whilst considering the specific parameters of this study, an investment in search engine optimisation rather than a pay-per-click campaign appears to produce better results at a lower cost, after a given period of time. [PDF to follow

  2. DEVELOPMENT OF METHODOLOGY FOR TRAFFIC ACCIDENT FORECASTING AT VARIOUS TYPICAL URBAN AREAS

    OpenAIRE

    D. V. Kapsky

    2012-01-01

    The paper provides investigation results pertaining to development of methodology for forecasting traffic accidents using a “conflict zone” method that considers potential danger for two typical urban areas, namely: signaled crossings and bumps that are made in the areas of zebra crossings and it also considers various types and kinds of conflicts. The investigations have made it possible to obtain various indices of threshold sensitivity in respect of  potential risks  and in relation to tra...

  3. A demonstration of expert systems applications in transportation engineering : volume II, TRANZ, a prototype expert system for traffic control in highway work zones.

    Science.gov (United States)

    1988-01-01

    The development of a prototype knowledge-based expert system (KBES) for selecting appropriate traffic control strategies and management techniques around highway work zones was initiated. This process was encompassed by the steps that formulate the p...

  4. Development and Validation in Air Traffic Control by Means of Real-Time Simulations

    Directory of Open Access Journals (Sweden)

    Stephan Herr

    2009-02-01

    Full Text Available The airspace in Central Europe is already one of the busiest airspaces in the world and the forecasts predict further traffic increases. The current air transport system is reaching its capacity limits, not only at airports but also in parts of the en-route area. This is mainly due to the workload constraints of air traffic controllers. In the past, many technical system functionalities were developed with the aim of reducing controller workload and thus enabling the safe handling of the predicted traffic growth. But these new functionalities alone will not provide adequate relief to air traffic controllers. Their working procedures and the airspace structure will have to be adapted accordingly. In order to obtain real operational benefits, these technical innovations must be integrated into an overall concept which – in addition to the above-mentioned factors – also takes account of ergonomic aspects and human-machine interfaces. When developing such an overall concept, additional evaluation and validation measures are indispensable to ensure that the desired operational benefits are achieved. This is why DFS has for many years used fast- and real-time simulations to assess and optimise any changes to be made to the air traffic control system. The working methods of DFS in this context are in keeping with the European Operational Concept Validation Methodology of 2007, in short E-OCVM. This paper outlines the development and validation activities of DFS using the MSP D/L project as an example. The project deals with the introduction of the new role of air traffic controllers as multi-sector planners (MSP and new system functionalities, such as air/ground data link (D/L. The project included the development of an operational concept for using the new functionalities as well as for defining working procedures and the airspace structure. This concept was subsequently evaluated by means of a fast-time simulation and two real-time simulations

  5. Systems engineering real estate development projects

    Science.gov (United States)

    Gusakova, Elena; Titarenko, Boris; Stepanov, Vitaliy

    2017-10-01

    In recent years, real estate development has accumulated a wealth of experience in implementing major projects, which requires comprehension and systematization. The scientific instrument of system engineering is studied in the article and is substantively interpreted with reference to real estate development projects. The most perspective approaches and models are substantiated, allowing strategically to plan the life cycle of the project as a whole, and also to solve the engineering butt problems of the project. The relevance of further scientific studies of regularities and specifics of the life cycle of real estate development projects conducted at the Moscow State University of Economics and Management at the ISTA department is shown.

  6. NNC's engineering development centre at Risley

    International Nuclear Information System (INIS)

    Garnsey, R.

    1994-01-01

    NNC's Engineering Development Centre (EDC) provides specialist engineering, manufacturing and development support to customers. EDC is located at Risley, near Warrington, but its operation are closely integrated into the Company's overall business activities based at its headquarters in Knutsford, Cheshire, fifteen miles away. EDC's facilities and expertise were originally developed to support the UK's nuclear power station construction programme. However, EDC professionals have since applied their specialist expertise to the benefit of new customers in line with the Company's diversification and a large and growing proportion of work is now in support of the defence and process industries. (author)

  7. The Impact of European Traffic Policy and Traffic Routes on the Development of the Ports of Rijeka and Place

    Directory of Open Access Journals (Sweden)

    Čedomir Ivaković

    2006-03-01

    Full Text Available Sea ports are the key segment of the traffic and economicdevelopment of maritime countries. Pan-European transportcorridors include the most important sea pmts and sea routes.They are an extension of the existing land corridors.The most important and the most promising crossings oftraffic corridors between the Central European, Pannonianand Adriatic areas, with the naturally shortest traffic routes directedtowards the Croatian sea ports are Corridor 58 ( Rijeka-Zagreb-Budapest and Corridor 5c (Ploce-Sarajevo-Osijek--Budapest. The primary purpose of this work is to study the importanceof the existing trading conditions and new investmentundertakings in the context of increase in competitiveness of theports of Rijeka and Place.The authors' attention is particularly directed to the constructionof new port terminals to increase the traffic potentialsof the Croatian sea ports. The formed conception with its characteristics,the methodology applied, and research results representthe quality starting points in determining a uniform portpolicy of the Republic of Croatia within the European trafficsystem.

  8. Development of a model performance-based sign sheeting specification based on the evaluation of nighttime traffic signs using legibility and eye-tracker data.

    Science.gov (United States)

    2010-09-01

    This project focused on the evaluation of traffic sign sheeting performance in terms of meeting the nighttime : driver needs. The goal was to develop a nighttime driver needs specification for traffic signs. The : researchers used nighttime sign legi...

  9. Development and Evaluation of a Control System for Regional Traffic Management

    Directory of Open Access Journals (Sweden)

    John L. McLin

    2011-01-01

    Full Text Available Traffic congestion is a worsening problem in metropolitan areas which will require integrated regional traffic control systems to improve traffic conditions. This paper presents a regional traffic control system which can detect incident conditions and provide integrated traffic management during nonrecurrent congestion events. The system combines advanced artificial intelligence techniques with a traffic performance model based on HCM equations. Preliminary evaluation of the control system using traffic microsimulation demonstrates that it has the potential to improve system conditions during traffic incidents. In addition, several enhancements were identified which will make the system more robust in a real traffic control setting. An assessment of the control system elements indicates that there are no substantial technical barriers in implementing this system in a large traffic network.

  10. Engineering software development with HyperCard

    Science.gov (United States)

    Darko, Robert J.

    1990-01-01

    The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.

  11. Software Engineering Principles for Courseware Development.

    Science.gov (United States)

    Magel, Kenneth

    1980-01-01

    Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

  12. Android-based E-Traffic law enforcement system in Surakarta City

    Science.gov (United States)

    Yulianto, Budi; Setiono

    2018-03-01

    The urban advancement is always overpowered by the increasing number of vehicles as the need for movement of people and goods. This can lead to traffic problems if there is no effort on the implementation of traffic management and engineering, and traffic law enforcement. In this case, the Government of Surakarta City has implemented various policies and regulations related to traffic management and engineering in order to run traffic in an orderly, safe and comfortable manner according to the applicable law. However, conditions in the field shows that traffic violations still occurred frequently due to the weakness of traffic law enforcement in terms of human resources and the system. In this connection, a tool is needed to support traffic law enforcement, especially in relation to the reporting system of traffic violations. This study aims to develop an Android-based traffic violations reporting application (E-Traffic Law Enforcement) as part of the traffic law enforcement system in Surakarta City. The Android-apps records the location and time of the traffic violations incident along with the visual evidence of the infringement. This information will be connected to the database system to detect offenders and to do the traffic law enforcement process.

  13. Offshore Wind Energy Systems Engineering Curriculum Development

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, Jon G. [Univ. of Massachusetts, Amherst, MA (United States); Manwell, James F. [Univ. of Massachusetts, Amherst, MA (United States); Lackner, Matthew A. [Univ. of Massachusetts, Amherst, MA (United States)

    2012-12-31

    Utility-scale electricity produced from offshore wind farms has the potential to contribute significantly to the energy production of the United States. In order for the U.S. to rapidly develop these abundant resources, knowledgeable scientists and engineers with sound understanding of offshore wind energy systems are critical. This report summarizes the development of an upper-level engineering course in "Offshore Wind Energy Systems Engineering." This course is designed to provide students with a comprehensive knowledge of both the technical challenges of offshore wind energy and the practical regulatory, permitting, and planning aspects of developing offshore wind farms in the U.S. This course was offered on a pilot basis in 2011 at the University of Massachusetts and the National Renewable Energy Laboratory (NREL), TU Delft, and GL Garrad Hassan have reviewed its content. As summarized in this report, the course consists of 17 separate topic areas emphasizing appropriate engineering fundamentals as well as development, planning, and regulatory issues. In addition to the course summary, the report gives the details of a public Internet site where references and related course material can be obtained. This course will fill a pressing need for the education and training of the U.S. workforce in this critically important area. Fundamentally, this course will be unique due to two attributes: an emphasis on the engineering and technical aspects of offshore wind energy systems, and a focus on offshore wind energy issues specific to the United States.

  14. Towards the development of a scientifically accountable, comprehensive and integrated national road traffic safety databank in South Africa

    CSIR Research Space (South Africa)

    Mynhardt, DC

    2014-07-01

    Full Text Available Transport Conference, CSIR Convention Centre, Pretoria, 7-10 July 2014 Towards the development of a scientifically accountable, comprehensive and integrated national road traffic safety databank in South Africa D. C. MYNHARDT Council for Scientific...

  15. Federal Funding of Engineering Research and Development, 1980-1984.

    Science.gov (United States)

    American Society of Mechanical Engineers, Washington, DC.

    Data on the sources, amounts, and trends of federal funding for engineering research and development (R&D) are presented for 1980-1984. Narrative highlights are provided for: the total federal funding obligations for engineering R&D, mechanical engineering, astronautical engineering, aeronautical engineering, chemical engineering, civil…

  16. Development of HCCI Engines for Dimethyl Ether

    DEFF Research Database (Denmark)

    Hansen, Kim Rene; Pedersen, Troels Dyhr; Schramm, Jesper

    This report has been prepared for the Danish Energy Agency. It summarizes the results of the project entitled: “Development of HCCI engines for DME”. The project has been financed by “EFP 06”. The chapters about theoretical and experimental studies have been written using the language and termino......This report has been prepared for the Danish Energy Agency. It summarizes the results of the project entitled: “Development of HCCI engines for DME”. The project has been financed by “EFP 06”. The chapters about theoretical and experimental studies have been written using the language...

  17. Traffic and Granular Flow '11

    CERN Document Server

    Buslaev, Alexander; Bugaev, Alexander; Yashina, Marina; Schadschneider, Andreas; Schreckenberg, Michael; TGF11

    2013-01-01

    This book continues the biannual series of conference proceedings, which has become a classical reference resource in traffic and granular research alike. It addresses new developments at the interface between physics, engineering and computational science. Complex systems, where many simple agents, be they vehicles or particles, give rise to surprising and fascinating phenomena.   The contributions collected in these proceedings cover several research fields, all of which deal with transport. Topics include highway, pedestrian and internet traffic, granular matter, biological transport, transport networks, data acquisition, data analysis and technological applications. Different perspectives, i.e. modeling, simulations, experiments and phenomenological observations, are considered.

  18. Urban traffic pollution reduction for sedan cars using petrol engines by hydro-oxide gas inclusion.

    Science.gov (United States)

    Al-Rousan, Ammar A; Alkheder, Sharaf; Musmar, Sa'ed A

    2015-12-01

    Petrol cars, in particular nonhybrid cars, contribute significantly to the pollution problem as compared with other types of cars. The originality of this article falls in the direction of using hydro-oxy gas to reduce pollution from petrol car engines. Experiments were performed in city areas at low real speeds, with constant engine speeds in the average of 2500 rpm and at variable velocity ratios (first speed was 10-20 km/hr, second speed was 20-35 km/hr, and third speed was 35-50 km/hr). Results indicated that through using hydro-oxy gas, a noticeable reduction in pollution was recorded. Oxygen (O2) percentage has increased by about 2.5%, and nitric oxide (NO) level has been reduced by about 500 ppm. Carbon monoxide (CO) has decreased by about 2.2%, and also CO2 has decreased by 2.1%. It's worth mentioning that for hybrid system in cars at speeds between 10 and 50 km/hr, the emission percentage change is zero. However, hybrid cars are less abundant than petrol cars. The originality of this paper falls in the direction of using hydro-oxy gas to reduce pollution from petrol car engines. Experiments were performed in city areas at low real speeds, with constant engine speeds in the average of 2500 rpm and at variable velocity ratios (first speed was 10-20 km/hr, second speed was 20-35 km/hr, and third speed was 35-50 km/h).

  19. Traffic theory

    National Research Council Canada - National Science Library

    Gazis, Denos C

    2002-01-01

    ... of traffic signal settings The vehicle-actuated traffic signal 87 89 77 CHAPTER 3. TRAFFIC CONTROL 101 Objectives of Traffic Control 103 Single, Isolated Intersection 105 Synchronization Scheme...

  20. Developing 3D microstructures for tissue engineering

    DEFF Research Database (Denmark)

    Mohanty, Soumyaranjan

    casting process to generate various large scale tissue engineering constructs with single pore geometry with the desired mechanical stiffness and porosity. In addition, a new technique was developed to fa bricate dual-pore scaffolds for various tissue-engineering applications where 3D printing...... materials have been developed and tested for enhancing the differentiation of hiPSC-derived hepatocytes and fabricating biodegradable scaffolds for in-vivo tissue engineering applications. Along with various scaffolds fabrication methods we finally presented an optimized study of hepatic differentiation...... of hiPSC-derived DE cells cultured for 25 days in a 3D perfusion bioreactor system with an array of 16 small-scale tissue-bioreactors with integrated dual-pore pore scaffolds and flow rates. Hepatic differentiation and functionality of hiPSC-derived hepatocytes were successfully assessed and compared...

  1. Exploring the relationship between development and road traffic injuries: a case study from India.

    Science.gov (United States)

    Garg, Nitin; Hyder, Adnan A

    2006-10-01

    Road traffic injuries (RTI) are a major cause of mortality and disability in the world. Only after significant losses have communities in developed nations taken necessary steps to prevent crashes and their consequences. Increase in road safety is related to increasing socio-economic development. We aim to study the trends in injury and death rates in a developing country, India, define sub-national variations, and analyse these trends in relation to economic and population growth. Public sector data from India were used to develop a standardized database on traffic injuries and indicator of economic development. The data were analysed using linear regression models to test the a priori hypothesis of a positive relationship between net domestic product (NDP), and injury and death rates from road crashes across states. The absolute burden of RTI in India has been consistently rising over the past three decades. The reported rates are lower than those estimated by global health agencies and may reflect under-reporting. Population-based rates provide a better assessment of the public health burden of RTI than vehicle-based rates. There is an inverted U-shaped relationship between NDP and injury and death rates. Even with the limited data, Kuznets phenomenon is evident for within-country level comparisons. India and other developing countries could learn from the experience of highly motorized nations to avoid the expected rise in RTI and deaths with economic development, by currently investing in road safety and prevention measures.

  2. Effective Software Engineering Leadership for Development Programs

    Science.gov (United States)

    Cagle West, Marsha

    2010-01-01

    Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

  3. Development status of the Vulcain engine

    Science.gov (United States)

    Gastal, J.; Eury, S.; Borromee, J.; Micewicz, J. B.

    1993-06-01

    The present account of the current status of the Ariane V launch vehicle's Vulcain first-stage cryofueled bipropellant engine gives attention to the Vulcain's overall configuration, as well as to its component designs, operational flowcharts, turbopump and combustion chamber performance verification trials, and program management responsibilities. Prospective development efforts currently envisioned are noted.

  4. Development of engineering drawing ability for emerging engineering education

    Science.gov (United States)

    Guo, Jian-Wen; Cao, Xiao-Chang; Xie, Li; Jin, Jian-Jun; Wang, Chu-Diao

    2017-09-01

    Students majoring in engineering is required by the emerging engineering education (3E) in the aspect of their ability of engineering drawing. This paper puts forward training mode of engineering drawing ability for 3E. This mode consists of three kinds of training including training in courses, training in competitions and training in actual demand. We also design the feasible implementation plan and supplies viable references to carry out the mode.

  5. Wind Energy Workforce Development: Engineering, Science, & Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

    2013-03-29

    Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

  6. Development of Advanced Small Hydrogen Engines

    Energy Technology Data Exchange (ETDEWEB)

    Sapru, Krishna; Tan, Zhaosheng; Chao, Ben

    2010-09-30

    The main objective of the project is to develop advanced, low cost conversions of small (< 25 hp) gasoline internal combustion engines (ICEs) to run on hydrogen fuel while maintaining the same performance and durability. This final technical report summarizes the results of i) the details of the conversion of several small gasoline ICEs to run on hydrogen, ii) the durability test of a converted hydrogen engine and iii) the demonstration of a prototype bundled canister solid hydrogen storage system. Peak power of the hydrogen engine achieves 60% of the power output of the gasoline counterpart. The efforts to boost the engine power with various options including installing the over-sized turbocharger, retrofit of custom-made pistons with high compression ratio, an advanced ignition system, and various types of fuel injection systems are not realized. A converted Honda GC160 engine with ACS system to run with hydrogen fuel is successful. Total accumulative runtime is 785 hours. A prototype bundled canister solid hydrogen storage system having nominal capacity of 1.2 kg is designed, constructed and demonstrated. It is capable of supporting a wide range of output load of a hydrogen generator.

  7. Does traffic exhaust contribute to the development of asthma and allergic sensitization in children: findings from recent cohort studies

    Directory of Open Access Journals (Sweden)

    Forsberg Bertil

    2009-04-01

    Full Text Available Abstract The aim of this review was to assess the evidence from recent prospective studies that long-term traffic pollution could contribute to the development of asthma-like symptoms and allergic sensitization in children. We have reviewed cohort studies published since 2002 and found in PubMed in Oct 2008. In all, 13 papers based on data from 9 cohorts have evaluated the relationship between traffic exposure and respiratory health. All surveys reported associations with at least some of the studied respiratory symptoms. The outcome varied, however, according to the age of the child. Nevertheless, the consistency in the results indicates that traffic exhaust contributes to the development of respiratory symptoms in healthy children. Potential effects of traffic exhaust on the development of allergic sensitization were only assessed in the four European birth cohorts. Long-term exposure to outdoor air pollutants had no association with sensitization in ten-year-old schoolchildren in Norway. In contrast, German, Dutch and Swedish preschool children had an increased risk of sensitization related to traffic exhaust despite fairly similar levels of outdoor air pollution as in Norway. Traffic-related effects on sensitization could be restricted to individuals with a specific genetic polymorphism. Assessment of gene-environment interactions on sensitization has so far only been carried out in a subgroup of the Swedish birth cohort. Further genetic association studies are required and may identify individuals vulnerable to adverse effects from traffic-related pollutants. Future studies should also evaluate effects of traffic exhaust on the development and long term outcome of different phenotypes of asthma and wheezing symptoms.

  8. Engineering Education for Sustainable Development. The Contribution of University Curricula to Engineering Education for Sustainable Development.

    NARCIS (Netherlands)

    Kastenhofer, Karen; Lansu, Angelique; Van Dam-Mieras, Rietje; Sotoudeh, Mahshid

    2010-01-01

    Global failures to reach a sustainable development within present-day societies as well as recent breakthroughs within technoscience pose new challenges to engineering education. The list of competencies which engineers should have to rise to these challenges is long and diverse, and often

  9. Develop railway engineering modules in UTK civil engineering undergraduate and graduate courses.

    Science.gov (United States)

    2015-05-31

    The importance of railway transport has long been recognized. However, no railway : engineering courses have been provided in the UTK civil engineering curricula. The : objective of this education project is to develop some railway engineering module...

  10. THE DEVELOPMENT OF THE REAL TIME INTEGRATED TRAFFIC INFORMATION SYSTEM (RITIS FOR INDONESIA

    Directory of Open Access Journals (Sweden)

    Ofyar Z. TAMIN

    2001-01-01

    One of the most important information is the best routes from each origin zone to each destination zone which have already considered the effect of congestion. This information will be the main data for the development of the Route Guidance System (RGS so that each driver can choose his best route through the road network. The best route information will be changed in a short-time-interval basis depending on the traffic condition. Moreover, this approach can also be extended to provide the short-time-interval environmental information. The system has been tested and validated in Bandung and it showed remarkably good results for Bandung condition.

  11. Aeronautical Communications Research and Development Needs for Future Air Traffic Management Applications

    Science.gov (United States)

    Kerczewski, Robert J.

    2002-01-01

    Continuing growth in regional and global air travel has resulted in increasing traffic congestion in the air and on the ground. In spite of occasional temporary downturns due to economic recessions and catastrophic events, average growth rates of air travel have remained high since the 1960s. The resulting congestion, which constrains expansion of the air transportation industry, inflicts schedule delays and decreases overall system efficiency, creating a pressing need to develop more efficient methods of air traffic management (ATM). New ATM techniques, procedures, air space automation methods, and decision support tools are being researched and developed for deployment in time frames stretching from the next few years to the year 2020 and beyond. As these methods become more advanced and increase in complexity, the requirements for information generation, sharing and transfer among the relevant entities in the ATM system increase dramatically. However, current aeronautical communications systems will be inadequate to meet the future information transfer demands created by these advanced ATM systems. Therefore, the NASA Glenn Research Center is undertaking research programs to develop communication, methods and key technologies that can meet these future requirements. As part of this process, studies, workshops, testing and experimentation, and research and analysis have established a number of research and technology development needs. The purpose of this paper is to outline the critical research and technology needs that have been identified in these activities, and explain how these needs have been determined.

  12. From crisis to development--analysis of air traffic control work processes.

    Science.gov (United States)

    Teperi, Anna-Maria; Leppänen, Anneli

    2011-03-01

    In this study an intervention to improve work processes in air traffic control (ATC) is evaluated. The background was the Finnish air traffic controllers' strike of 1999. The old ways of thinking and acting did not support development of ATC prompting a need for a new kind of working culture in the organisation. Several actions were started. In one of these, ATC work processes were modelled by personnel and development plans concerning work were delivered to top management. Different actors (management, trade union, stakeholders) were interviewed before (n=16) and after the project (n=7). The intervention supported systematic co-operation between different actors in the organisation. However, a follow-up revealed that only a few participants had adopted the idea of continuous work development. Mastery of human factors is crucial in a high reliability work environment such as ATC. But how is the analytical and co-operative aspect kept alive in an organisation that is run by strict international regulation and has a strong technical competence, but is not that strong in collaborative and human aspects? Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  13. Developing an indicator for the chronic health impact of traffic-related pollutant emissions

    International Nuclear Information System (INIS)

    Lépicier, Véronique; Chiron, Mireille; Joumard, Robert

    2013-01-01

    The goal of this study is to develop an emission based indicator for the health impact of the air pollution caused by traffic. This indicator must make it possible to compare different situations, for example different Urban Travel Plans, or technical innovations. Our work is based on a literature survey of methods for evaluating health impacts and, more particularly, those which relate to the atmospheric pollution caused by transport. We then define a health impact indicator based on the traffic emissions, named IISCEP for Chronic health impact indicator of pollutant emission. Here health is understood in a restricted meaning, excluding well-being. Only primary pollutants can be considered, as the inputs are emission data and an indicator must be simple. The indicator is calculated as the sum of each pollutant emission multiplied by a dispersion and exposition factor and a substance specific toxicity factor taking account of the severity. Last, two examples are shown using the IISCEP: comparison between petrol and diesel vehicles, and Nantes urban district in 2008 vs 2002. Even if it could still be improved, IISCEP is a straightforward indicator which can be used to gauge the chronic effects of inhaling primary pollutants. It can only be used in comparisons, between different scenarios or different technologies. The quality of the emissions data and the choice of the pollutants that are considered are the two essential factors that determine its validity and reliability. - Highlights: ► The goal of the study is to develop an emission based indicator for the health impact of the air pollution caused by traffic. ► It is based on a literature survey of methods for evaluating health impacts related to the atmospheric pollution. ► We define a composite indicator based on the traffic emissions and on local data as dispersion conditions and population. ► The indicator is a combination of pollutant emission, dispersion, exposition factor, and substance specific

  14. Engineering development in nuclear power plant construction

    International Nuclear Information System (INIS)

    Guenther, P.

    1979-01-01

    Proceeding from the up-to-now experience in the erection of nuclear power stations, especially of the first and second unit of the Greifswald nuclear power plant, the following essential aspects of the development of constructional engineering are discussed: (1) constructional features and criteria, (2) organizational management, (3) current status and problems in prelimary operations, and (4) possibilities of further expenditure reductions in constructing nuclear power stations

  15. Development of a Software Based Firewall System for Computer Network Traffic Control

    Directory of Open Access Journals (Sweden)

    Ikhajamgbe OYAKHILOME

    2009-12-01

    Full Text Available The connection of an internal network to an external network such as Internet has made it vulnerable to attacks. One class of network attack is unauthorized penetration into network due to the openness of networks. It is possible for hackers to sum access to an internal network, this pose great danger to the network and network resources. Our objective and major concern of network design was to build a secured network, based on software firewall that ensured the integrity and confidentiality of information on the network. We studied several mechanisms to achieve this; one of such mechanism is the implementation of firewall system as a network defence. Our developed firewall has the ability to determine which network traffic should be allowed in or out of the network. Part of our studied work was also channelled towards a comprehensive study of hardware firewall security system with the aim of developing this software based firewall system. Our software firewall goes a long way in protecting an internal network from external unauthorized traffic penetration. We included an anti virus software which is lacking in most firewalls.

  16. Protein engineering for biofuel production: Recent development

    Directory of Open Access Journals (Sweden)

    Nisha Singh

    2016-09-01

    Full Text Available The unstable and unsure handiness of crude oil sources moreover the rising price of fuels have shifted international efforts to utilize renewable resources for the assembly of greener energy and a replacement which might additionally meet the high energy demand of the globe. Biofuels represent a sustainable, renewable, and also the solely predictable energy supply to fossil fuels. During the green production of Biofuels, several in vivo processes place confidence in the conversion of biomass to sugars by engineered enzymes, and the subsequent conversion of sugars to chemicals via designed proteins in microbial production hosts. Enzymes are indispensable within the effort to provide fuels in an ecologically friendly manner. They have the potential to catalyze reactions with high specificity and potency while not using dangerous chemicals. Nature provides an in depth assortment of enzymes, however usually these should be altered to perform desired functions in needed conditions. Presently available enzymes like cellulose are subject to tight induction and regulation systems and additionally suffer inhibition from numerous end products. Therefore, more impregnable and economical catalyst preparations ought to be developed for the enzymatic method to be more economical. Approaches like protein engineering, reconstitution of protein mixtures and bio prospecting for superior enzymes are gaining importance. Advances in enzyme engineering allow the planning and/or directed evolution of enzymes specifically tailored for such industrial applications. Recent years have seen the production of improved enzymes to help with the conversion of biomass into fuels. The assembly of the many of those fuels is feasible due to advances in protein engineering. This review discusses the distinctive challenges that protein engineering faces in the method of changing lignocellulose to biofuels and the way they're addressed by recent advances in this field.

  17. Idaho National Engineering Laboratory site development plan

    International Nuclear Information System (INIS)

    1994-09-01

    This plan briefly describes the 20-year outlook for the Idaho National Engineering Laboratory (INEL). Missions, workloads, worker populations, facilities, land, and other resources necessary to fulfill the 20-year site development vision for the INEL are addressed. In addition, the plan examines factors that could enhance or deter new or expanded missions at the INEL. And finally, the plan discusses specific site development issues facing the INEL, possible solutions, resources required to resolve these issues, and the anticipated impacts if these issues remain unresolved

  18. Technology developments for a compound cycle engine

    Science.gov (United States)

    Bobula, George A.; Wintucky, William T.; Castor, J. G.

    1988-01-01

    The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the light weight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burned for a typical 2 hour (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. Results of recent activities in a program to establish the technology base for a CCE are presented. The objective of this program is to research and develop those critical technologies which are necessary for the demonstration of a multicylinder diesel core in the early 1990s. A major accomplishment was the initial screening and identification of a lubricant which has potential for meeting the material wear rate limits of the application. An in-situ wear measurement system also was developed to provide accurate, readily obtainable, real time measurements of ring and liner wear. Wear data, from early single cylinder engine tests, are presented to show correlation of the in-situ measurements and the system's utility in determining parametric wear trends. A plan to demonstrate a compound cycle engine by the mid 1990s is included.

  19. Research and development in power plant engineering

    International Nuclear Information System (INIS)

    Riedle, K.; Taud, R.

    2001-01-01

    Research and development are a bridge for visions that are escorted to a successful market introduction. Also in power plant engineering, research and development are a lever with which the product power plant, its technology and processes can be adapted to the quickly changing future market. In the overview given by this paper, therefore at first the development boosters and targets are outlined from the viewpoint of the market; then the available technology portfolio is addressed in a concise way. Targets for the development can be seen from the support programmes of the governments. Before a preview is given, some development topics from the point of view of the manufacturer are introduced. (orig.) [de

  20. Strategic alliances in engineering, technology and development

    International Nuclear Information System (INIS)

    Jazrawi, W.

    1991-01-01

    The role of strategic alliances in the development of heavy oil resources, both mineable and in-situ, is discussed. A strategic alliance is defined as a custom designed, long term collaborative working arrangement between two parties to pool, exchange, and integrate their resources to maximize mutual gain. A combination of one or more of the following success factors is seen as contributing to the unlocking of static heavy oil resources: sufficiently high and sustained crude oil prices; strategic intent to pursue heavy oil development regardless of short-term setbacks or economic downturns; technology breakthroughs that can reduce bitumen supply and upgrading costs; and strategic alliances. An idealized model for strategic alliances designed to help develop heavy oil resources is illustrated. The advantages and pitfalls involved in strategic alliances are listed along with the characteristics of viable contract agreements for such alliances. Some examples of strategic alliances in engineering and technology development are presented from Alberta experience. 2 figs., 1 tab

  1. Sustainable Development in Engineering Education: A Pedagogical Approach

    Science.gov (United States)

    Ahrens, A.; Zascerinska, J.

    2012-01-01

    Engineering education is facing a challenge of the development of student engineers' social responsibility in the context of sustainable development. The aim of the research is to analyze efficiency of engineering curriculum in the context of sustainable development underpinning elaboration of pedagogical guidelines on the development of students'…

  2. Advancing Systems Engineering Excellence: The Marshall Systems Engineering Leadership Development Program

    Science.gov (United States)

    Hall, Philip; Whitfield, Susan

    2011-01-01

    As NASA undertakes increasingly complex projects, the need for expert systems engineers and leaders in systems engineering is becoming more pronounced. As a result of this issue, the Agency has undertaken an initiative to develop more systems engineering leaders through its Systems Engineering Leadership Development Program; however, the NASA Office of the Chief Engineer has also called on the field Centers to develop mechanisms to strengthen their expertise in systems engineering locally. In response to this call, Marshall Space Flight Center (MSFC) has developed a comprehensive development program for aspiring systems engineers and systems engineering leaders. This presentation will summarize the two-level program, which consists of a combination of training courses and on-the-job, developmental training assignments at the Center to help develop stronger expertise in systems engineering and technical leadership. In addition, it will focus on the success the program has had in its pilot year. The program hosted a formal kickoff event for Level I on October 13, 2009. The first class includes 42 participants from across MSFC and Michoud Assembly Facility (MAF). A formal call for Level II is forthcoming. With the new Agency focus on research and development of new technologies, having a strong pool of well-trained systems engineers is becoming increasingly more critical. Programs such as the Marshall Systems Engineering Leadership Development Program, as well as those developed at other Centers, help ensure that there is an upcoming generation of trained systems engineers and systems engineering leaders to meet future design challenges.

  3. Modern mechanical engineering research, development and education

    CERN Document Server

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  4. Center Planning and Development Student Engineer

    Science.gov (United States)

    Jenkins, Kenneth T.

    2013-01-01

    This fall I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning Development (CPD) Directorate. CPD works with commercial companies who are interested using KSCs unique capabilities in spaceflight, spacecraft processing, ground systems and Research Development (RD) projects that fall in line with NASAs mission and goals. CPD is divided into four (4) groups: (1) AD-A, which works on the Master Planning for center, (2) AD-B (where I am), which works on project management and integration, (3) AD-C, which works on partnership development, and (4) AD-T, which works on the RD aspects of partnerships. CPDs main goal is to one day make KSC the worlds largest spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group with employees having a wide knowledge of not only the Space Shuttle, but also that of the Apollo era. Our director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree at ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering drawings from the Apollo and Shuttle eras, to supporting NASA rocket launches (MAVEN), and working on actual agreementsproposals that will be used in the partnership process with multiple partners. Most of the work I have done is sensitive information and cannot be disclosed.

  5. Developing safety culture in nuclear power engineering

    International Nuclear Information System (INIS)

    Tevlin, S.A.

    2000-01-01

    The new issue (no. 11) of the IAEA publications series Safety Reports, devoted to the safety culture in nuclear engineering Safety culture development in the nuclear activities. Practical recommendations to achieve success, is analyzed. A number of recommendations of international experts is presented and basic general indicators of satisfactory and insufficient safety culture in the nuclear engineering are indicated. It is shown that the safety culture has two foundations: human behavior and high quality of the control system. The necessity of creating the confidence by the management at all levels of the enterprise, development of individual initiative and responsibility of the workers, which make it possible to realize the structural hierarchic system, including technical, human and organizational constituents, is noted. Three stages are traced in the process of introducing the safety culture. At the first stage the require,emts of scientific-technical documentation and provisions of the governmental, regional and control organs are fulfilled. At the second stage the management of the organization accepts the safety as an important direction in its activities. At the third stage the organization accomplishes its work, proceeding from the position of constant safety improvement. The general model of the safety culture development is considered [ru

  6. Consensus-Based Cooperative Control Based on Pollution Sensing and Traffic Information for Urban Traffic Networks.

    Science.gov (United States)

    Artuñedo, Antonio; Del Toro, Raúl M; Haber, Rodolfo E

    2017-04-26

    Nowadays many studies are being conducted to develop solutions for improving the performance of urban traffic networks. One of the main challenges is the necessary cooperation among different entities such as vehicles or infrastructure systems and how to exploit the information available through networks of sensors deployed as infrastructures for smart cities. In this work an algorithm for cooperative control of urban subsystems is proposed to provide a solution for mobility problems in cities. The interconnected traffic lights controller ( TLC ) network adapts traffic lights cycles, based on traffic and air pollution sensory information, in order to improve the performance of urban traffic networks. The presence of air pollution in cities is not only caused by road traffic but there are other pollution sources that contribute to increase or decrease the pollution level. Due to the distributed and heterogeneous nature of the different components involved, a system of systems engineering approach is applied to design a consensus-based control algorithm. The designed control strategy contains a consensus-based component that uses the information shared in the network for reaching a consensus in the state of TLC network components. Discrete event systems specification is applied for modelling and simulation. The proposed solution is assessed by simulation studies with very promising results to deal with simultaneous responses to both pollution levels and traffic flows in urban traffic networks.

  7. Consensus-Based Cooperative Control Based on Pollution Sensing and Traffic Information for Urban Traffic Networks

    Directory of Open Access Journals (Sweden)

    Antonio Artuñedo

    2017-04-01

    Full Text Available Nowadays many studies are being conducted to develop solutions for improving the performance of urban traffic networks. One of the main challenges is the necessary cooperation among different entities such as vehicles or infrastructure systems and how to exploit the information available through networks of sensors deployed as infrastructures for smart cities. In this work an algorithm for cooperative control of urban subsystems is proposed to provide a solution for mobility problems in cities. The interconnected traffic lights controller (TLC network adapts traffic lights cycles, based on traffic and air pollution sensory information, in order to improve the performance of urban traffic networks. The presence of air pollution in cities is not only caused by road traffic but there are other pollution sources that contribute to increase or decrease the pollution level. Due to the distributed and heterogeneous nature of the different components involved, a system of systems engineering approach is applied to design a consensus-based control algorithm. The designed control strategy contains a consensus-based component that uses the information shared in the network for reaching a consensus in the state of TLC network components. Discrete event systems specification is applied for modelling and simulation. The proposed solution is assessed by simulation studies with very promising results to deal with simultaneous responses to both pollution levels and traffic flows in urban traffic networks.

  8. A Systems Engineering Approach to Architecture Development

    Science.gov (United States)

    Di Pietro, David A.

    2015-01-01

    Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

  9. Economic development and road traffic fatalities in Russia: analysis of federal regions 2004-2011.

    Science.gov (United States)

    He, Huan; Paichadze, Nino; Hyder, Adnan A; Bishai, David

    2015-12-01

    The relationship between economic development and road safety at sub-national level has not been well established. This study aims to assess the relationships between economic growth (measured by gross regional product (GRP)) and road traffic fatalities (RTFs) and crash fatality ratio (CFR) at sub-national level in Russia. We used published secondary data on annual RTFs and CFR obtained from the traffic police and socioeconomic development indicators from the statistics department for each Russian federal region (referred to in Russia as "subject") for 2004-2011. We used multivariate fixed effects models for longitudinal data to examine the GRP-RTF and the GRP-CFR relationships excluding regions with extreme values. Time (in years) and a set of relevant socioeconomic variables (territory, population, number of privately owned cars, number of public buses, length of public motor roads, number of physicians, and budget expenditure on health care and physical wellness) were also included as covariates in the models. The RTF rates decreased monotonically over time as GRP per capita increased in 66 studied regions during 2004-2011. This relationship was mainly explained by the number of privately owned cars and partially explained by year dummy variables, number of buses, and number of physicians. CFR also decreased monotonically as GRP per capita increased in 67 studied regions. This relationship between economic growth and CFR was fully explained by secular time trends. The year dummy effects on CFR were not mediated by other socioeconomic variables included in the study. For the period of 2004-2011 in Russia, the reduction in RTFs is mostly explained by increasing the number of private cars, while the reduction of CFR is mostly associated with year-effects suggesting a process of diffusion of knowledge, which is not solely dominated by economic growth.

  10. Traffic Light Options

    DEFF Research Database (Denmark)

    Jørgensen, Peter Løchte

    This paper introduces, prices, and analyzes traffic light options. The traffic light option is an innovative structured OTC derivative developed independently by several London-based investment banks to suit the needs of Danish life and pension (L&P) companies, which must comply with the traffic...... 2006, and supervisory authorities in many other European countries have implemented similar regulation. Traffic light options are therefore likely to attract the attention of a wider audience of pension fund managers in the future. Focusing on the valuation of the traffic light option we set up a Black...... light scenarios. These stress scenarios entail drops in interest rates as well as in stock prices, and traffic light options are thus designed to pay off and preserve sufficient capital when interest rates and stock prices fall simultaneously. Sweden's FSA implemented a traffic light system in January...

  11. Traffic Light Options

    DEFF Research Database (Denmark)

    Jørgensen, Peter Løchte

    2007-01-01

    This paper introduces, prices, and analyzes traffic light options. The traffic light option is an innovative structured OTC derivative developed independently by several London-based investment banks to suit the needs of Danish life and pension (L&P) companies, which must comply with the traffic...... 2006, and supervisory authorities in many other European countries have implemented similar regulation. Traffic light options are therefore likely to attract the attention of a wider audience of pension fund managers in the future. Focusing on the valuation of the traffic light option we set up a Black...... light scenarios. These stress scenarios entail drops in interest rates as well as in stock prices, and traffic light options are thus designed to pay off and preserve sufficient capital when interest rates and stock prices fall simultaneously. Sweden's FSA implemented a traffic light system in January...

  12. Systems design and engineering : facilitating multidisciplinary development projects

    NARCIS (Netherlands)

    Bonnema, Gerrit Maarten; Veenvliet, Karel; Broenink, Johannes F.

    2016-01-01

    As its name implies, the aim of Systems Design and Engineering: Facilitating Multidisciplinary Development Projects is to help systems engineers develop the skills and thought processes needed to successfully develop and implement engineered systems. Such expertise typically does not come through

  13. 77 FR 14462 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-03-09

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: April 18, 2012--9:30 a.m...

  14. 77 FR 54648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-09-05

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. TIME AND DATE: September 26, 2012--9 a.m. to 4 p.m...

  15. 76 FR 12404 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-03-07

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 20, 2011--9:30 a.m. to 4 p.m...

  16. 75 FR 14243 - Research, Engineering And Development Advisory Committee

    Science.gov (United States)

    2010-03-24

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering And Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 21, 2010--9 a.m. to 5 p.m...

  17. 76 FR 44648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-07-26

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 21, 2011--9 a.m...

  18. 78 FR 16357 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-03-14

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development... hereby given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: April 24--8:30 a.m. to 4...

  19. DEVELOPMENT OF THE AUTOMATED ROAD TRAFFIC CONTROL SYSTEMS IN MINSK AS PART OF THE INTELLECTUAL CITY TRANSPORT SYSTEM

    Directory of Open Access Journals (Sweden)

    D. V. Kapskiy

    2017-01-01

    Full Text Available The results of the analysis of Minsk city transport system performance. It is shown that the growth of car ownership has caused a number of problems, among which the low-speed communication, bad driving modes, the presence of elevated levels of congestion and accidents. The corresponding figures for accidents in Minsk and some cities in the world that allow to characterize the transport system of the city of Minsk, as satisfactory. To improve the system and improve the quality of traffic necessary to create intelligent transport system of the city of Minsk. Intelligent Transportation System, being a global trend, enables dramatically improve road quality. Automated traffic control system and other subsystems as part of the Intelligent Transportation Systems are tools for achieving the goals for improving the safety and comfort of road users. It is proposed as a base for its creation to choose an automated traffic control system, which has a corresponding functional, structural, organizational and institutional provisions for its development. The technological requirements for the functioning of an integrated system, which relate to the level of efficiency, including accidents on sections of the road network included in the created system. Modernization of the automated traffic control system and its transformation into an intelligent transport system will reduce emergency, economic and environmental, and social costs in the road traffic is not less than 15 % from their current level, despite the steady growth of car ownership in the city. It is planned to create a complete intelligent transportation system.

  20. Development of active traffic management strategies for Minnesota freeway corridors : final report.

    Science.gov (United States)

    2015-06-01

    In this study, the effectiveness of the I-35W variable advisory speed limit system on the improvement of the traffic : flow was evaluated with the real traffic data. The analysis results indicate there was significant reduction in the : average maxim...

  1. Metering with Traffic Signal Control : Development and Evaluation of an Algorithm

    NARCIS (Netherlands)

    Taale, H.; Hoogendoorn, S.P.; Legius, P.

    2015-01-01

    For some on-ramps, which cause congestion on the motorway, it is not possible to install a ramp metering system for geometric or other reasons. But sometimes it is possible to meter traffic with the traffic lights of nearby intersections in such a way that the situation on the motorway improves and

  2. Heat engine development for solar thermal power systems

    Science.gov (United States)

    Pham, H. Q.; Jaffe, L. D.

    The parabolic dish solar collector systems for converting sunlight to electrical power through a heat engine will, require a small heat engine of high performance long lifetime to be competitive with conventional power systems. The most promising engine candidates are Stirling, high temperature Brayton, and combined cycle. Engines available in the current market today do not meet these requirements. The development of Stirling and high temperature Brayton for automotive applications was studied which utilizes much of the technology developed in this automotive program for solar power engines. The technical status of the engine candidates is reviewed and the components that may additional development to meet solar thermal system requirements are identified.

  3. Developing a New Industrial Engineering Curriculum Using a Systems Engineering Approach

    Science.gov (United States)

    Buyurgan, Nebil; Kiassat, Corey

    2017-01-01

    This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have…

  4. Impact of traffic noise on railway traffic safety

    Directory of Open Access Journals (Sweden)

    Zdravko TOŠ

    2008-01-01

    Full Text Available Traffic noise is one of the dominant factors of ergo-assessment. The harmful impact of traffic noise on the engine driver as target group can be studied in isolation from other ergo-assessment factors only in the initial phase of research. The simultaneous action of several related factors in the system of ergo-assessment factors has cumulative effect on the perception and psychomotoric status of the railway traffic participants in the appropriate traffic situation. The initial partial research of traffic noise by a combination of several scientific methods needs to be eventually upgraded by studying the relations among several concurrent important or dominant ergo-assessment factors.

  5. Development of ergonomic website for engineering education

    Directory of Open Access Journals (Sweden)

    Faradilla Arnes

    2018-01-01

    Full Text Available Engineering education contains two aspects; theory and practice. Practice activity supports the students to implement the theory obtained in the class. Therefore, it will be better if the theory has material visualization in order to support and make easier the student and lecturer in teaching activity. Analisis Perancangan Kerja dan Ergonomi (APK & E is one of the laboratories in Industrial Engineering, Universitas Islam Indonesia. APK & E laboratory which uses website as a tool to communicate to the students. Currently, the existing website still show standard display by conventional way. Based on the questionnaire, the student difficult to understand the material especially for Micromotion Study since this material requires the video to show the student in assembly activity. Augmented Reality (AR combines the real and virtual objects that interactive in the real time and registered in 3D space. AR also combines the real and virtual in displaying information in the real time, in a way that enhances the individual abilities to operate the system in the real world. The system which combines between AR and Micromotion Study was come up. The required software to develop the online AR system is FLARToolKit 2.5.1. In this research, marker detection accuracy measurement of the used toolkit has been conducted and it showed 85% of accuracy level.

  6. Educating the Engineer for Sustainable Community Development

    Science.gov (United States)

    Munoz, D. R.

    2008-12-01

    More than ever before, we are confronting the challenges of limited resources (water, food, energy and mineral), while also facing complex challenges with the environment and related social unrest. Resource access problems are exacerbated by multi-scale geopolitical instability. We seek a balance that will allow profit but also leave a world fit for our children to inherit. Many are working with small groups to make positive change through finding solutions that address these challenges. In fact, some say that in sum, it is the largest human movement that has ever existed. In this talk I will share our experiences to alleviate vulnerabilities for populations of humans in need while working with students, corporate entities and non governmental organizations. Our main focus is to educate a new cadre of engineers that have an enhanced awareness of and better communication skills for a different cultural environment than the one in which they were raised and are hungry to seek new opportunities to serve humanity at a basic level. The results of a few of the more than forty humanitarian engineering projects completed since 2003 will be superimposed on a theoretical framework for sustainable community development. This will be useful information to those seeking a social corporate position of responsibility and a world that more closely approaches a sustainable equilibrium.

  7. Some developing concepts of engineering education

    Science.gov (United States)

    Perkins, C. D.

    1975-01-01

    An analysis of the circumstances which have created a shortage of aeronautical engineering undergraduate students in the universities is presented. Suggestions for motivating students to enter aeronautical engineering are examined. The support of the aeronautical industry for graduate education funding is recommended. Examples of actions taken by governmental agencies to promote increased interest in aeronautical engineering are included.

  8. Bildung and identity development in engineering education

    DEFF Research Database (Denmark)

    Du, Xiangyun

    2006-01-01

    a social context. The analysis of empirical data shows that studying engineering involves not only the mastery of scientific knowledge and technical skills, but also learning the language, established practices, beliefs, values, and norms in the engineering culture, and learning to become an engineer...

  9. The millennium development goals and road traffic injuries: exploring the linkages in South Asia.

    Science.gov (United States)

    Hyder, Adnan A; Ghaffar, Abdul

    2004-12-01

    In a major summit of the members of the United Nations (UN) in 2000, a Millennium Declaration was adopted which called for making the elimination of poverty and promotion of sustainable development a global priority. A road map was agreed upon to operationalize the declaration, and the Millennium Development Goals (MDG) were integrated within the document. The MDGs are now increasingly being used to assess the performance of countries, institutions and the global community. WHO declares that the MDGs provide "a set of outcomes that are relevant to the development of national health policy frameworks". It also states that although MDGs do not cover all the components of public health, when broadly interpreted "the goals provide an opportunity to address important cross-cutting issues and key constraints to health". Consistent with WHO's call for a broad interpretation of the MDGs, and building on the health linkages identified by WHO, this paper explores the linkages between the MDGs and the impact of road traffic injuries (RTI). This is done in the context of South Asia, one of the poorest and populated regions of the developing world.

  10. 78 FR 47049 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-08-02

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development...; 5 U.S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 18--8:30 a.m. to...

  11. Developing Project Duration Models in Software Engineering

    Institute of Scientific and Technical Information of China (English)

    Pierre Bourque; Serge Oligny; Alain Abran; Bertrand Fournier

    2007-01-01

    Based on the empirical analysis of data contained in the International Software Benchmarking Standards Group(ISBSG) repository, this paper presents software engineering project duration models based on project effort. Duration models are built for the entire dataset and for subsets of projects developed for personal computer, mid-range and mainframeplatforms. Duration models are also constructed for projects requiring fewer than 400 person-hours of effort and for projectsre quiring more than 400 person-hours of effort. The usefulness of adding the maximum number of assigned resources as asecond independent variable to explain duration is also analyzed. The opportunity to build duration models directly fromproject functional size in function points is investigated as well.

  12. Developing engineering processes through integrated modelling of product and process

    DEFF Research Database (Denmark)

    Nielsen, Jeppe Bjerrum; Hvam, Lars

    2012-01-01

    This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

  13. Development of an Intelligent Car Engine Fault Troubleshooting ...

    African Journals Online (AJOL)

    Development of an Intelligent Car Engine Fault Troubleshooting System (CEFTS) ... and also provides a troubleshooting framework for other researchers to work on. Keywords: ... inference engine, knowledge acquisition, artificial intelligence.

  14. Trajectory Based Traffic Analysis

    DEFF Research Database (Denmark)

    Krogh, Benjamin Bjerre; Andersen, Ove; Lewis-Kelham, Edwin

    2013-01-01

    We present the INTRA system for interactive path-based traffic analysis. The analyses are developed in collaboration with traffic researchers and provide novel insights into conditions such as congestion, travel-time, choice of route, and traffic-flow. INTRA supports interactive point-and-click a......We present the INTRA system for interactive path-based traffic analysis. The analyses are developed in collaboration with traffic researchers and provide novel insights into conditions such as congestion, travel-time, choice of route, and traffic-flow. INTRA supports interactive point......-and-click analysis, due to a novel and efficient indexing structure. With the web-site daisy.aau.dk/its/spqdemo/we will demonstrate several analyses, using a very large real-world data set consisting of 1.9 billion GPS records (1.5 million trajectories) recorded from more than 13000 vehicles, and touching most...

  15. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  16. Collaborative Engineering for Research and Development

    Science.gov (United States)

    Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.

    2004-01-01

    Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

  17. Interoperability and Reliability of Multiplatform MPLS VPN: Comparison of Traffic Engineering with RSVP-TE Protocol and LDP Protocol

    Directory of Open Access Journals (Sweden)

    Nanang Ismail

    2017-10-01

    48% of packet loss per 100 sent packets while on RSVP packet loss percentage is 35.5% per 100 sent packets. Both protocols have interoperability on the third layer of multiplatform MPLS VPN, but on heavy loaded traffic condition, RSVP protocol has better reliability than the LDP protocol.

  18. Rapid product development: project engineering joined to design engineering in a concurrent engineering context

    Science.gov (United States)

    Bernard, Alain; Ouazzani, A.; Chambolle, F.; Bocquet, Jean Claud

    1997-01-01

    Software tools for designers are mainly based on geometry. Today, many industrial modelers have been rebuilt with C++, or any other object oriented language. This paper proposes to locate the research topics, in order to develop a functional link between project management tools, technical data management and product models. The 'design process' aspect will also be justified through the need of capitalizing designer intent and design history. This is related to different research works of Mechanical Engineering and Logistics Laboratory of Ecole Centrale Paris, and especially two PhD topics.

  19. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  20. Data mining tools for the support of traffic signal timing plan development in arterial networks

    Science.gov (United States)

    2001-05-01

    Intelligent transportation systems (ITS) include large numbers of traffic sensors that collect enormous quantities of data. The data provided by ITS is necessary for advanced forms of control; however, basic forms of control, primarily time-of-day (T...

  1. Bike-Ped Portal : development of an online nonmotorized traffic count archive.

    Science.gov (United States)

    2017-05-01

    Robust bicycle and pedestrian data on a national scale would serve numerous purposes. Access to a centralized nonmotorized traffic count : archive can open the door for innovation through research, design and planning; provide safety researchers with...

  2. Development of an interactive GIS based work zone traffic control tool.

    Science.gov (United States)

    2013-08-01

    The purpose of this study was to include consideration for intersections into the previously created GIS traffic control planning tool. Available data for making intersection control calculations were collected and integrated into the design of the t...

  3. Is Brazil going to achieve the road traffic deaths target? An analysis about the sustainable development goals.

    Science.gov (United States)

    Blumenberg, Cauane; Martins, Rafaela C; Calu Costa, Janaína; Ricardo, Luiza I C

    2017-09-07

    To describe the temporal relationship between the road traffic mortality rate and gross domestic product (GDP) per capita in Brazil, and make an annual prediction of the evolution of both indicators until 2020, the end of the Sustainable Development Goals (SDGs) monitoring period. Brazilian road traffic mortality rate official data were described from 2000 to 2015, while the GDP per capita official data were described from 2000 to 2013. GDP per capita and traffic mortality rate predictions were performed until 2020 using fractional polynomial analysis. Correlations were assessed using Pearson's correlation coefficient. From 2000 to 2015, there were over 446 000 road crashes fatal victims in Brazil. The road traffic mortality rate was positively related to the Brazilian GDP per capita, with a strong correlation (r=0.89; psustainable development and public policies is needed in order to meet such an overwhelming goal. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  4. Is vehicle automation enough to prevent crashes? Role of traffic operations in automated driving environments for traffic safety.

    Science.gov (United States)

    Jeong, Eunbi; Oh, Cheol; Lee, Seolyoung

    2017-07-01

    reductions when the MPR was greater than 50%. This study should inspire transportation researchers and engineers to develop effective traffic operations strategies for automated driving environments. Copyright © 2017. Published by Elsevier Ltd.

  5. Engineering education in Bangladesh - an indicator of economic development

    Science.gov (United States)

    Chowdhury, Harun; Alam, Firoz

    2012-05-01

    Developing nations including Bangladesh are significantly lagging behind the millennium development target due to the lack of science, technology and engineering education. Bangladesh as a least developing country has only 44 engineers per million people. Its technological education and gross domestic product growth are not collinear. Although limited progress was made in humanities, basic sciences, agriculture and medical sciences, a vast gap is left in technical and engineering education. This paper describes the present condition of engineering education in the country and explores ways to improve engineering education in order to meet the national as well as global skills demand.

  6. Road Traffic in China

    NARCIS (Netherlands)

    Jie, L.; Van Zuylen, H.J.

    2014-01-01

    Traffic is tightly related to the social and economic development in a country. In China the development of the economy has been very fast in the past 30 years and this is still continuing. The transport infrastructure shows a similar pattern, while traffic is also rapidly growing. In urban areas

  7. Cummins Engine Company B5.9 Propane Engine Development, Certification, and Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    The ADEPT Group, Inc. (Los Angeles, California)

    1998-12-18

    The objective of this project was to successfuly develop and certify an LPG-dedicated medium-duty original equipment manufacturer (OEM) engine that could be put into production. The engine was launched into production in 1994, and more than 800 B5.9G engines are now in service in the United States and abroad. This engine is now offered by more than 30 bus and truck OEMs.

  8. Emergency evacuation/transportation plan update: Traffic model development and evaluation of early closure procedures. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-10-28

    Prolonged delays in traffic experienced by Laboratory personnel during a recent early dismissal in inclement weather, coupled with reconstruction efforts along NM 502 east of the White Rock Wye for the next 1 to 2 years, has prompted Los Alamos National Laboratory (LANL) to re-evaluate and improve the present transportation plan and its integration with contingency plans maintained in other organizations. Facilities planners and emergency operations staff need to evaluate the transportation system`s capability to inefficiently and safely evacuate LANL under different low-level emergency conditions. A variety of potential procedures governing the release of employees from the different technical areas (TAs) requires evaluation, perhaps with regard to multiple emergency-condition scenarios, with one or more optimal procedures ultimately presented for adoption by Lab Management. The work undertaken in this project will hopefully lay a foundation for an on-going, progressive transportation system analysis capability. It utilizes microscale simulation techniques to affirm, reassess and validate the Laboratory`s Early Dismissal/Closure/Delayed Opening Plan. The Laboratory is required by Federal guidelines, and compelled by prudent practice and conscientious regard for the welfare of employees and nearby residents, to maintain plans and operating procedures for evacuation if the need arises. The tools developed during this process can be used outside of contingency planning. It is anticipated that the traffic models developed will allow site planners to evaluate changes to the traffic network which could better serve the normal traffic levels. Changes in roadway configuration, control strategies (signalization and signing), response strategies to traffic accidents, and patterns of demand can be modelled using the analysis tools developed during this project. Such scenarios typically are important considerations in master planning and facilities programming.

  9. Agile Service Development: A Rule-Based Method Engineering Approach

    NARCIS (Netherlands)

    dr. Martijn Zoet; Stijn Hoppenbrouwers; Inge van de Weerd; Johan Versendaal

    2011-01-01

    Agile software development has evolved into an increasingly mature software development approach and has been applied successfully in many software vendors’ development departments. In this position paper, we address the broader agile service development. Based on method engineering principles we

  10. Development of an integrated energy concept: survey of the potential for reducing emissions of climate-influencing trace gases through efficient utilisation in the old Laender. Sector traffic

    International Nuclear Information System (INIS)

    Oppermann, F.

    1993-11-01

    If CO 2 emissions are to be reduced on account of their major contribution to the anthropogenic greenhouse effect, as planned, for example, by the Federal Government, then a key role will have to be assigned to the traffic sector because this is the only sector whose energy consumption and consequent CO 2 emissions is relentlessly increasing. This forms the background to the present study's intent of sketching out possible routes of development of the traffic system in the old Laender. Three scenarios having particular regard to traffic-related CO 2 emissions are presented. The study is based on the reference years 1987, 2005, and 2020; its scope is defined by the so-called inland concept. The scenario calculations are based on, firstly, a detailed quantitative survey of the West German traffic system in 1987 as the starting year and, secondly, a dp-supported traffic model that is capable of generating a scenario and describes traffic systems in terms of parameters such as traffic volume and CO 2 emissions taking interdependencies with other energy consuming sectors into account. Working from a general transsectoral scenario formulation, measures appropriate to the respective framework conditions governing the three scenarios 'Business as usual' (BAU), 'Efficiency', and 'Ecologically structured policy' are defined and the resulting effects on the individual elements of the traffic system are assessed. The results of the subsequently performed scenario calculations largely consist of detailed, absolute, traffic-volume-specific CO 2 emission values for each reference year. (orig.) [de

  11. A Summer Leadership Development Program for Chemical Engineering Students

    Science.gov (United States)

    Simpson, Annie E.; Evans, Greg J.; Reeve, Doug

    2012-01-01

    The Engineering Leaders of Tomorrow Program (LOT) is a comprehensive curricular, co-curricular, extra-curricular leadership development initiative for engineering students. LOT envisions: "an engineering education that is a life-long foundation for transformational leaders and outstanding citizens." Academic courses, co-curricular certificate…

  12. URBAN TRAFFIC ACCIDENT ANALYSIS BY USING GEOGRAPHIC INFORMATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Meltem SAPLIOĞLU

    2006-03-01

    Full Text Available In recent years, traffic accidents that cause more social and economic losses than that of natural disasters,have become a national problem in Turkey. To solve this problem and to reduce the casualties, road safety programs are tried to be developed. It is necessary to develop the most effective measures with low investment cost due to limited budgets allocated to such road safety programs. The most important program is to determine dangerous locations of traffic accidents and to improve these sections from the road safety view point. New Technologies are driving a cycle of continuous improvement that causes rapid changes in the traffic engineering and any engineering services within it. It is obvious that this developed services will be the potential for forward-thinking engineering studies to take a more influence role. In this study, Geographic Information System (GIS was used to identify the hazardous locations of traffic accidents in Isparta. Isparta city map was digitized by using Arcinfo 7.21. Traffic accident reports occurred between 1998-2002 were obtained from Directory of Isparta Traffic Region and had been used to form the database. Topology was set up by using Crash Diagrams and Geographic Position Reference Systems. Tables are formed according to the obtained results and interpreted.

  13. Incidence and severity of head and neck injuries in victims of road traffic crashes: In an economically developed country.

    Science.gov (United States)

    Bener, Abdulbari; Rahman, Yassir S Abdul; Mitra, Biswadev

    2009-01-01

    Head and neck injuries following the road traffic crashes (RTCs) are the most common cause of morbidity and mortality in most developed and developing countries and may also result in temporary or permanent disability. The aim of this study was to determine the incidence pattern of head and neck injuries, investigate its trend and identify the severity of injuries involved with road traffic crashes (RTCs) during the period 2001-2006. This is a retrospective descriptive hospital based study. The patients with head and neck injuries were seen and treated in the Accident and Emergency Department of the Hamad General Hospital and other Trauma Centers of the Hamad Medical Corporation following the road traffic crashes during the period 2001-2006. This study is a retrospective analysis of 6709 patients attended and treated at the Accident and Emergency and Trauma centers for head and neck injuries over a 6 year period. Head and neck injuries were determined according to the ICD 10 criteria. Of these, 3013 drivers, 2502 passengers, 704 pedestrians and 490 two wheel riders (motor bike and cyclists). Details of all the road traffic crash patients were compiled in the database of the Emergency Medical Services (EMS), and the data of patients with head and neck injuries were extracted from this database. A total of 6709 patients with head and neck injuries was reported during the study period. Majority of the victims were non-Qataris (68.7%), men (85.9%) and in the age group 20-44 years (68.5%). There were statistical significant differences in relation to age, nationality, gender, and accident during week ends for head and neck injuries (pQatar from road traffic crashes. The incidence of head and neck injuries is still very high in Qatar, but the severity of injury was mild in most of the victims. The findings of the study highlighted the need for taking urgent steps for safety of people especially drivers and passengers.

  14. Development of a graphical method for choosing the optimal mode of traffic light

    Science.gov (United States)

    Novikov, A. N.; Katunin, A. A.; Novikov, I. A.; Kravchenko, A. A.; Shevtsova, A. G.

    2018-05-01

    Changing the transportation infrastructure for improving the main characteristics of the transportation flow is the key problem in transportation planning, therefore the main question lies in the ability to plan the change of the main indicators for the long term. In this investigation, an analysis of the city’s population has been performed and the most difficult transportation segment has been identified. During its identification, the main characteristics of the transportation flow have been established. For the evaluation of these characteristics until 2025, an analysis of the available methods of establishing changes in their values has been conducted. During the analysis of the above mentioned methods of evaluation of the change in intensity, based on the method of extrapolation, three scenarios of the development of the transportation system have been identified. It has been established that the most favorable method of controlling the transportation flow in the entrance to the city is the long term control of the traffic system. For the first time, with the help of the authors, based on the investigations of foreign scientists and the mathematical analysis of the changes in intensiveness on the main routes of the given road, the method of graphically choosing the required control plan has been put forward. The effectiveness of said organization scheme of the transportation system has been rated in the Transyt-14 program, with the analysis of changes in the main characteristics of the transportation flow.

  15. The Taskload-Efficiency-Safety-Buffer Triangle--development and validation with air traffic management.

    Science.gov (United States)

    Kallus, K Wolfgang; Hoffmann, Peter; Winkler, Hildegard; Vormayr, Elisabeth M

    2010-02-01

    The Taskload-Efficiency-Safety-Buffer Triangle (TEST) was developed as a new computerised scaling tool for quickly visualising changes in and trade-offs between the three critical factors that determine the work situation of air traffic management (ATM), i.e. taskload, efficiency and safety-buffers. Based on a task analysis of ATM and backed up by the stress-strain model, an easy-to-interpret triangle was constructed and validated both in simulated and real ATM workplaces. Results from the validation studies show that TEST does not only reflect the most relevant task characteristics, but also provides additional insights in the controllers' working styles. The TEST tool can make ATM safety surveys more efficient and help supervisors to decide about optimal times for opening or closing additional sectors. Statement of Relevance: TEST is a new tool to assess taskload, efficiency and safety-buffers in a joint scaling. It reflects increases in taskload and effects of taskload on safety-buffers and efficiency, as well as trade-offs in opposite directions. This tool might be very useful to check sector capacity in ATM and other high risk environments.

  16. Condition and prospects of development of agricultural mechanical engineering

    OpenAIRE

    Vsevolod Babushkin; Margarita Ignatyeva

    2011-01-01

    In this paper, an estimation of condition and level of development of agricultural mechanical engineering is given; also an expert estimation of scales of the Russian market of agricultural machinery is given. The factors negatively influencing formation of the named market are designated. Features and prospects of development of agricultural mechanical engineering of Sverdlovsk region are defined. State regulation mechanisms of domestic agricultural mechanical engineering development are des...

  17. Engineering, Development and Philosophy American, Chinese and European Perspectives

    CERN Document Server

    Mitcham, Carl; Li, Bocong; An, Yanming

    2012-01-01

    This inclusive, cross-cultural study rethinks the nexus between engineering, development, and culture. It offers diverse commentary from a range of disciplinary perspectives on how the philosophies of today’s cultural triumvirate—American, European and Chinese—are shaped and given nuance by the cross-fertilization of engineering and development. Scholars from the humanities and social sciences as well as engineers themselves reflect on key questions that arise in this relational context, such as how international development work affects the professional views, identities, practice and ethics of engineers.   The first volume to offer a systematic and collaborative study that cuts across continental boundaries, the book delineates the kinds of skills and competences that tomorrow’s engineering success stories will require, and analyzes fascinating aspects of the interplay between engineering and philosophy, such as how traditionally Chinese ways of thinking can influence modern engineering practice in...

  18. New trends in nuclear power engineering development

    International Nuclear Information System (INIS)

    Krasin, A.K.

    1974-01-01

    The specific features are considered of three designs of nuclear power plants with fast reactors: three-circuit nuclear power plant with liquid sodium as primary and secondary coolant, in the third circuit water vapor being used as turbine working medium, dual cycle nuclear power plant with pressurized helium as primary coolant and water vapor as turbine working medium, direct cycle nuclear power plant with a dissociating gas (nitrogen tetroxide N 2 O 4 ) as reactor coolant and turbine working medium. The version of the direct cycle nuclear power plant with dissociating N 2 O 4 was proposed and being developed by the Institute of Nuclear Engineering of the Academy of Sciencies of the BSSR. The thermal and physical properties of the dissociating gas allow a high-power-density reactor core to be used with a hard neutron spectra resulting in a high breeding ratio and a short doubling time. The pressure range from 150 to 170 bar was proven for this coolant under laboratory conditions and structural materials were chosen that ensure all the components of the direct cycle nuclear power plant to be workable. At present it is difficult to say which of the three versions is the most advantageous. The further development of a full-scale prototypes of a commercial nuclear power plant with a fast reactor and investigation of their technical and economic parameters remain the problems of utmost importance. A possible use of nuclear reactors is shortly considered for process heat production, in ferrous metallurgy, for hydrogen and new isotope production, and for radiation chemistry as well

  19. Engineer Research and Development Center's Materials Testing Center (MTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...

  20. Supporting Usability Engineering in Small Software Development Organizations

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2013-01-01

    Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

  1. Microbial Development and Metabolic Engineering | Bioenergy | NREL

    Science.gov (United States)

    Diversity Our genetically engineered microbes utilize a variety of feedstock including cellulose, xylan , syngas, simple sugars, organic acids, and carbon dioxide (CO2). We have modified the metabolic pathways

  2. Engineering Education in Bangladesh--An Indicator of Economic Development

    Science.gov (United States)

    Chowdhury, Harun; Alam, Firoz

    2012-01-01

    Developing nations including Bangladesh are significantly lagging behind the millennium development target due to the lack of science, technology and engineering education. Bangladesh as a least developing country has only 44 engineers per million people. Its technological education and gross domestic product growth are not collinear. Although…

  3. Further developments in performance prediction techniques of adiabatic diesel engines

    Energy Technology Data Exchange (ETDEWEB)

    Rasihhan, Y

    1990-01-01

    The engine cycle simulation program 'SPICE', developed at Bath University, has been used extensively for insulated diesel engine research. The present study introduces more comprehensive engine heat transfer models thus enabling us to study the insulated engine heat transfer and performance characteristics in more detail. The new version of 'SPICE' separates the gas to wall heat transfer into two parts, convective and radiative. For this purpose, a detailed radiative heat transfer model which considers both the flame (gas and soot) and wall to wall radiative heat transfer is written. The previous engine resistance model is refined and replaced by a more detailed resistance model which considers piston-liner conduction heat transfer and 2-D heat flow in the liner. The wall surface temperature swing is also included in the engine heat transfer calculations which is quite significant in low conductivity ceramic insulated engines. A 1-D finite difference model is written for the transient heat transfer region of the wall and linked to the engine resistance model. This new version of 'SPICE' is used to predict the insulated engine heat transfer and performance for the experimental Petter PH1W engine for various insulation levels and schemes. An answer to the controversy of increase in engine heat loss with insulation is looked for. The effect of wall deposits on engine heat transfer and its significance for the insulated engine is highlighted. (Author).

  4. Development and evaluation of a profile negotiation process for integrating aircraft and air traffic control automation

    Science.gov (United States)

    Green, Steven M.; Denbraven, Wim; Williams, David H.

    1993-01-01

    The development and evaluation of the profile negotiation process (PNP), an interactive process between an aircraft and air traffic control (ATC) that integrates airborne and ground-based automation capabilities to determine conflict-free trajectories that are as close to an aircraft's preference as possible, are described. The PNP was evaluated in a real-time simulation experiment conducted jointly by NASA's Ames and Langley Research Centers. The Ames Center/TRACON Automation System (CTAS) was used to support the ATC environment, and the Langley Transport Systems Research Vehicle (TSRV) piloted cab was used to simulate a 4D Flight Management System (FMS) capable aircraft. Both systems were connected in real time by way of voice and data lines; digital datalink communications capability was developed and evaluated as a means of supporting the air/ground exchange of trajectory data. The controllers were able to consistently and effectively negotiate nominally conflict-free vertical profiles with the 4D-equipped aircraft. The actual profiles flown were substantially closer to the aircraft's preference than would have been possible without the PNP. However, there was a strong consensus among the pilots and controllers that the level of automation of the PNP should be increased to make the process more transparent. The experiment demonstrated the importance of an aircraft's ability to accurately execute a negotiated profile as well as the need for digital datalink to support advanced air/ground data communications. The concept of trajectory space is proposed as a comprehensive approach for coupling the processes of trajectory planning and tracking to allow maximum pilot discretion in meeting ATC constraints.

  5. Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

    Science.gov (United States)

    Tang, Xiaofeng

    Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

  6. Development cooperation as methodology for teaching social responsibility to engineers

    Science.gov (United States)

    Lappalainen, Pia

    2011-12-01

    The role of engineering in promoting global well-being has become accentuated, turning the engineering curriculum into a means of dividing well-being equally. The gradual fortifying calls for humanitarian engineering have resulted in the incorporation of social responsibility themes in the university curriculum. Cooperation, communication, teamwork, intercultural cooperation, sustainability, social and global responsibility represent the socio-cultural dimensions that are becoming increasingly important as globalisation intensifies the demands for socially and globally adept engineering communities. This article describes an experiment, the Development Cooperation Project, which was conducted at Aalto University in Finland to integrate social responsibility themes into higher engineering education.

  7. Traffic analysis toolbox volume XI : weather and traffic analysis, modeling and simulation.

    Science.gov (United States)

    2010-12-01

    This document presents a weather module for the traffic analysis tools program. It provides traffic engineers, transportation modelers and decisions makers with a guide that can incorporate weather impacts into transportation system analysis and mode...

  8. From Goods to Traffic:First Steps Toward an Auction-based Traffic Signal Controller

    OpenAIRE

    Raphael, Jeffery; Maskell, Simon; Sklar, Elizabeth Ida

    2015-01-01

    Traffic congestion is a major issue that plagues many urban road networks large and small. Traffic engineers are now leaning towards Intelligent Traffic Systems as many physical changes to road networks are costly or infeasible. Multi-Agent Systems (MAS) have become a popular paradigm for intelligent solutions to traffic management problems. There are many MAS approaches to traffic management that utilise market mechanisms. In market-based approaches, drivers “pay” to use the roadways. Howeve...

  9. Comparing Two Approaches for Engineering Education Development

    DEFF Research Database (Denmark)

    Edström, Kristina; Kolmos, Anette

    2012-01-01

    During the last decade there have been two dominating models for reforming engineering education: Problem/Project Based Learning (PBL) and the CDIO Initiative. The aim of this paper is to compare the PBL and CDIO approaches to engineering education reform, to identify and explain similarities...... and differences. CDIO and PBL will each be defined and compared in terms of the original need analysis, underlying educational philosophy and the essentials of the respective approaches to engineering education. In these respects we see many similarities. Circumstances that explain differences in history...... approaches have much in common and can be combined, and especially that the practitioners have much to learn from each other’s experiences through a dialogue between the communities. This structured comparison will potentially indicate specifically what an institution experienced in one of the communities...

  10. Design and Operational Evaluation of the Traffic Management Advisor at the Ft. Worth Air Route Traffic Control Center

    Science.gov (United States)

    Swenson, Harry N.; Vincent, Danny; Tobias, Leonard (Technical Monitor)

    1997-01-01

    NASA and the FAA have designed and developed and an automation tool known as the Traffic Management Advisor (TMA). The system was operationally evaluated at the Ft. Worth Air Route Traffic Control Center (ARTCC). The TMA is a time-based strategic planning tool that provides Traffic Management Coordinators and En Route Air Traffic Controllers the ability to efficiently optimize the capacity of a demand impacted airport. The TMA consists of trajectory prediction, constraint-based runway scheduling, traffic flow visualization and controllers advisories. The TMA was used and operationally evaluated for forty-one rush traffic periods during a one month period in the Summer of 1996. The evaluations included all shifts of air traffic operations as well as periods of inclement weather. Performance data was collected for engineering and human factor analysis and compared with similar operations without the TMA. The engineering data indicates that the operations with the TMA show a one to two minute per aircraft delay reduction during rush periods. The human factor data indicate a perceived reduction in en route controller workload as well as an increase in job satisfaction. Upon completion of the evaluation, the TMA has become part of the normal operations at the Ft. Worth ARTCC.

  11. ITSA: Internet Traffic Statistics Archive

    NARCIS (Netherlands)

    Hoogesteger, Martijn; de Oliveira Schmidt, R.; Pras, Aiko

    Motivated by the fact that comprehensive and long term Internet traffic measurements can be hard to obtain, we have proposed and developed the Internet Traffic Statistics Archive (ITSA). Since 2013, ITSA concentrates reports on high-level statistics of Internet traffic worldwide. Examples of

  12. Visualization of Traffic Accidents

    Science.gov (United States)

    Wang, Jie; Shen, Yuzhong; Khattak, Asad

    2010-01-01

    Traffic accidents have tremendous impact on society. Annually approximately 6.4 million vehicle accidents are reported by police in the US and nearly half of them result in catastrophic injuries. Visualizations of traffic accidents using geographic information systems (GIS) greatly facilitate handling and analysis of traffic accidents in many aspects. Environmental Systems Research Institute (ESRI), Inc. is the world leader in GIS research and development. ArcGIS, a software package developed by ESRI, has the capabilities to display events associated with a road network, such as accident locations, and pavement quality. But when event locations related to a road network are processed, the existing algorithm used by ArcGIS does not utilize all the information related to the routes of the road network and produces erroneous visualization results of event locations. This software bug causes serious problems for applications in which accurate location information is critical for emergency responses, such as traffic accidents. This paper aims to address this problem and proposes an improved method that utilizes all relevant information of traffic accidents, namely, route number, direction, and mile post, and extracts correct event locations for accurate traffic accident visualization and analysis. The proposed method generates a new shape file for traffic accidents and displays them on top of the existing road network in ArcGIS. Visualization of traffic accidents along Hampton Roads Bridge Tunnel is included to demonstrate the effectiveness of the proposed method.

  13. Comparison of Engine Simulation Software for Development of Control System

    Directory of Open Access Journals (Sweden)

    KinYip Chan

    2013-01-01

    Full Text Available Most commonly used commercial engine simulation packages generate detailed estimation of the combustion and gas flow parameters. These parameters are required for advanced research on fluid flow and heat transfer and development of geometries of engine components. However, engine control involves different operating parameters. Various sensors are installed into the engine, the combustion performance is recorded, and data is sent to engine control unit (ECU. ECU computes the new set of parameters to make fine adjustments to actuators providing better engine performance. Such techniques include variable valve timing, variable ignition timing, variable air to fuel ratio, and variable compression ratio. In the present study, two of the commercial packages, Ricardo Wave and Lotus Engine Simulation, have been tested on the capabilities for engine control purposes. These packages are compared with an in-house developed package and with reference results available from the literature. Different numerical experiments have been carried out from which it can be concluded that all packages predict similar profiles of pressure and temperature in the engine cylinder. Moreover, those are in reasonable agreement with the reference results while in-house developed package is possible to run simulations with changing speed for engine control purpose.

  14. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  15. Estimating Emissions from Railway Traffic

    DEFF Research Database (Denmark)

    Jørgensen, Morten W.; Sorenson, Spencer C.

    1998-01-01

    Several parameters of importance for estimating emissions from railway traffic are discussed, and typical results presented. Typical emissions factors from diesel engines and electrical power generation are presented, and the effect of differences in national electrical generation sources...

  16. Development of interdisciplinary undergraduate railroad engineering course.

    Science.gov (United States)

    2016-02-29

    Professor James McKinney was a participant in the AREMA 2008 Railroad Engineering Education Symposium (REES) held at the University of Illinois at Urbana-Champaign, as well as the AREMA 2010 REES held at the Johnson County Community College/BNSF's Tr...

  17. Development Activities on Airbreathing Combined Cycle Engines

    Science.gov (United States)

    McArthur, J. Craig; Lyles, Garry (Technical Monitor)

    2000-01-01

    Contents include the following: Advanced reusable transportation(ART); aerojet and rocketdyne tests, RBCC focused concept flowpaths,fabricate flight weigh, test select components, document ART project, Istar (Integrated system test of an airbreathing rocket); combined cycle propulsion testbed;hydrocarbon demonstrator tracebility; Istar engine system and vehicle system closure study; and Istar project planning.

  18. Systems Engineering Assessment & Workforce Development Plan

    Science.gov (United States)

    2012-11-05

    Government or its technical domains. Other fields, such as culinary and healthcare, have also identified these emerging and growing issues (Calhoun...et al. (2009). "The Art and Science of Systems Engineering." Systems Research Forum 3(2): 81-100. Shenhar, A. and B. Sauser, Eds. (2009). Systems

  19. Development of an Industrial Engineering Project

    Science.gov (United States)

    Moreno, Lorenzo; Gonzalez, Evelio; Acosta, Leopoldo; Toledo, Jonay; Marichal, Nicolas; Hamilton, Alberto; Sigut, Marta; Mendez, J. Albino; Hernandez, Sergio; Torres, Santiago

    2005-01-01

    This paper presents a teaching strategy of the scheduling and developmental phase of an Industrial Engineering computer project. It is based on a real project which has been carried out by our department in collaboration with a local company. The classroom setting provides an environment where students can experience firsthand all phases of the…

  20. Modeling the development of tissue engineered cartilage

    NARCIS (Netherlands)

    Sengers, B.G.

    2005-01-01

    The limited healing capacity of articular cartilage forms a major clinical problem. In general, current treatments of cartilage damage temporarily reliefs symptoms, but fail in the long term. Tissue engineering (TE) has been proposed as a more permanent repair strategy. Cartilage TE aims at

  1. Engineering vascular development for tissue regeneration

    NARCIS (Netherlands)

    Rivron, N.C.

    2010-01-01

    Tissue engineering and regenerative medicine aim at restoring a damaged tissue by recreating in vitro or promoting its regeneratin in vovo. The vasculature is central to these therapies for the irrigation of the defective tissue (oxygen, nutrients or circulating regenerative cells) and as an

  2. An Engineer-To-Order Mass Customization Development Framework

    DEFF Research Database (Denmark)

    Bossen, Jacob; Hansson, Michael Natapon; Madsen, Ole

    2014-01-01

    competitiveness and revenue, in which Engineer-To-Order companies may benefit from adopting Mass Customization concepts. As automated manufacturing systems tends to be software intensive, it become equally important to enable reusability for physical components and for software related artefacts. In parallel...... to Mass Customization, Software Product Line Engineering has emerged as a way for software developers to manage variability and reusability. This paper seeks to combine the concepts of Mass Customization and Software Product Line Engineering, by introducing a development framework applicable for Engineer...

  3. Modeling Left-Turn Driving Behavior at Signalized Intersections with Mixed Traffic Conditions

    Directory of Open Access Journals (Sweden)

    Hong Li

    2016-01-01

    Full Text Available In many developing countries, mixed traffic is the most common type of urban transportation; traffic of this type faces many major problems in traffic engineering, such as conflicts, inefficiency, and security issues. This paper focuses on the traffic engineering concerns on the driving behavior of left-turning vehicles caused by different degrees of pedestrian violations. The traffic characteristics of left-turning vehicles and pedestrians in the affected region at a signalized intersection were analyzed and a cellular-automata-based “following-conflict” driving behavior model that mainly addresses four basic behavior modes was proposed to study the conflict and behavior mechanisms of left-turning vehicles by mathematic methodologies. Four basic driving behavior modes were reproduced in computer simulations, and a logit model of the behavior mode choice was also developed to analyze the relative share of each behavior mode. Finally, the microscopic characteristics of driving behaviors and the macroscopic parameters of traffic flow in the affected region were all determined. These data are important reference for geometry and capacity design for signalized intersections. The simulation results show that the proposed models are valid and can be used to represent the behavior of left-turning vehicles in the case of conflicts with illegally crossing pedestrians. These results will have potential applications on improving traffic safety and traffic capacity at signalized intersections with mixed traffic conditions.

  4. IDC Re-Engineering Phase 3 Development Plan.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burns, John F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pollock, David L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-01-01

    Sandia National Laboratories has prepared a project development plan that proposes how the parties interested in the IDC Re-Engineering system will coordinate its development, testing and transition to operations.

  5. IDC Re-Engineering Phase 3 Development Plan

    International Nuclear Information System (INIS)

    Harris, James M.; Burns, John F.; Pollock, David L.

    2017-01-01

    Sandia National Laboratories has prepared a project development plan that proposes how the parties interested in the IDC Re-Engineering system will coordinate its development, testing and transition to operations.

  6. Provision of an air traffic control services in an airport environment : design and development of a Java application through the Hibernate persistence framework

    OpenAIRE

    Galduf Tel, Enrique

    2011-01-01

    Galduf Tel, E. (2010). Provision of an air traffic control services in an airport environment : design and development of a Java application through the Hibernate persistence framework. http://hdl.handle.net/10251/10161. Archivo delegado

  7. Association between traffic-related air pollution in schools and cognitive development in primary school children: a prospective cohort study.

    Directory of Open Access Journals (Sweden)

    Jordi Sunyer

    2015-03-01

    Full Text Available Air pollution is a suspected developmental neurotoxicant. Many schools are located in close proximity to busy roads, and traffic air pollution peaks when children are at school. We aimed to assess whether exposure of children in primary school to traffic-related air pollutants is associated with impaired cognitive development.We conducted a prospective study of children (n = 2,715, aged 7 to 10 y from 39 schools in Barcelona (Catalonia, Spain exposed to high and low traffic-related air pollution, paired by school socioeconomic index; children were tested four times (i.e., to assess the 12-mo developmental trajectories via computerized tests (n = 10,112. Chronic traffic air pollution (elemental carbon [EC], nitrogen dioxide [NO2], and ultrafine particle number [UFP; 10-700 nm] was measured twice during 1-wk campaigns both in the courtyard (outdoor and inside the classroom (indoor simultaneously in each school pair. Cognitive development was assessed with the n-back and the attentional network tests, in particular, working memory (two-back detectability, superior working memory (three-back detectability, and inattentiveness (hit reaction time standard error. Linear mixed effects models were adjusted for age, sex, maternal education, socioeconomic status, and air pollution exposure at home. Children from highly polluted schools had a smaller growth in cognitive development than children from the paired lowly polluted schools, both in crude and adjusted models (e.g., 7.4% [95% CI 5.6%-8.8%] versus 11.5% [95% CI 8.9%-12.5%] improvement in working memory, p = 0.0024. Cogently, children attending schools with higher levels of EC, NO2, and UFP both indoors and outdoors experienced substantially smaller growth in all the cognitive measurements; for example, a change from the first to the fourth quartile in indoor EC reduced the gain in working memory by 13.0% (95% CI 4.2%-23.1%. Residual confounding for social class could not be discarded completely

  8. Association between traffic-related air pollution in schools and cognitive development in primary school children: a prospective cohort study.

    Science.gov (United States)

    Sunyer, Jordi; Esnaola, Mikel; Alvarez-Pedrerol, Mar; Forns, Joan; Rivas, Ioar; López-Vicente, Mònica; Suades-González, Elisabet; Foraster, Maria; Garcia-Esteban, Raquel; Basagaña, Xavier; Viana, Mar; Cirach, Marta; Moreno, Teresa; Alastuey, Andrés; Sebastian-Galles, Núria; Nieuwenhuijsen, Mark; Querol, Xavier

    2015-03-01

    Air pollution is a suspected developmental neurotoxicant. Many schools are located in close proximity to busy roads, and traffic air pollution peaks when children are at school. We aimed to assess whether exposure of children in primary school to traffic-related air pollutants is associated with impaired cognitive development. We conducted a prospective study of children (n = 2,715, aged 7 to 10 y) from 39 schools in Barcelona (Catalonia, Spain) exposed to high and low traffic-related air pollution, paired by school socioeconomic index; children were tested four times (i.e., to assess the 12-mo developmental trajectories) via computerized tests (n = 10,112). Chronic traffic air pollution (elemental carbon [EC], nitrogen dioxide [NO2], and ultrafine particle number [UFP; 10-700 nm]) was measured twice during 1-wk campaigns both in the courtyard (outdoor) and inside the classroom (indoor) simultaneously in each school pair. Cognitive development was assessed with the n-back and the attentional network tests, in particular, working memory (two-back detectability), superior working memory (three-back detectability), and inattentiveness (hit reaction time standard error). Linear mixed effects models were adjusted for age, sex, maternal education, socioeconomic status, and air pollution exposure at home. Children from highly polluted schools had a smaller growth in cognitive development than children from the paired lowly polluted schools, both in crude and adjusted models (e.g., 7.4% [95% CI 5.6%-8.8%] versus 11.5% [95% CI 8.9%-12.5%] improvement in working memory, p = 0.0024). Cogently, children attending schools with higher levels of EC, NO2, and UFP both indoors and outdoors experienced substantially smaller growth in all the cognitive measurements; for example, a change from the first to the fourth quartile in indoor EC reduced the gain in working memory by 13.0% (95% CI 4.2%-23.1%). Residual confounding for social class could not be discarded completely; however

  9. Traffic safety strategies

    Directory of Open Access Journals (Sweden)

    V. Sadauskas

    2003-04-01

    Full Text Available Fast development of the number of vehicles is closely related not only to large benefit for the public but also to certain undesirable social and economic consequences. Firstly - large numbers of injured and killed people are involved into the accidents. The target to improve traffic safety situation in Lithuania can be reached only after the detailed evaluation of transport system, environment, traffic participants, road and vehicle. Taking into consideration the accident situation in Lithuania and its causes the followings priority trends are suggested: The improvement of the coordination of road traffic safety system, the training and education of road users, the explanation of the importance of traffic safety and its propagation, the improvement of traffic conditions. Recommendations and proposals for differentiated criterion of maximum speed limit selection taking into account different factors are provided in the work.

  10. Engineering for Sustainable Development - an Obligatory Skill of the Future Engineer

    DEFF Research Database (Denmark)

    Alting, Leo

    2001-01-01

    , the environmental and the social/societal. The economical responsibility is handled by the well-known and accepted methods/tools/regulations, to handle the environmental responsibility good engineering methods and tools are appearing, but to handle the social/societal responsibility only fragmented and inconsistent...... elements exist. However, one thing is clear - we will have to provide our engineering students with understanding, methods and tools so that they can engineer sustainable solutions - especially engineer environmentally friendlier solutions. The Department of Manufacturing Engineering and the Institute...... for Product Development have actively taken part in the development from awareness of the environmental problems to providing methods and tools to support a sustainable development. The situation today in the education at DTU is shortly mentioned and the education at the Department of Manufacturing...

  11. Photonics education development for electrical engineering students

    Science.gov (United States)

    Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

    2017-08-01

    We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

  12. Development of nuclear rocket engine technology

    International Nuclear Information System (INIS)

    Gunn, S.V.

    1989-01-01

    Research sponsored by the Atomic Energy Commission, the USAF, and NASA (later on) in the area of nuclear rocket propulsion is discussed. It was found that a graphite reactor, loaded with highly concentrated Uranium 235, can be used to heat high pressure liquid hydrogen to temperatures of about 4500 R, and to expand the hydrogen through a high expansion ratio rocket nozzle assembly. The results of 20 reactor tests conducted at the Nevada Test Site between July 1959 and June 1969 are analyzed. On the basis of these results, the feasibility of solid graphite reactor/nuclear rocket engines is revealed. It is maintained that this technology will support future space propulsion requirements, using liquid hydrogen as the propellant, for thrust requirements ranging from 25,000 lbs to 250,000 lbs, with vacuum specific impulses of at least 850 sec and with full engine throttle capability. 12 refs

  13. A new approach to managing work-related road traffic injury: The development of a health investment framework.

    Science.gov (United States)

    Warmerdam, Amanda; Newnam, Sharon; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

    2017-08-18

    Statistics indicate that employees commuting or traveling as part of their work are overrepresented in workplace injury and death. Despite this, many organizations are unaware of the factors within their organizations that are likely to influence potential reductions in work-related road traffic injury. This article presents a multilevel conceptual framework that identifies health investment as the central feature in reducing work-related road traffic injury. Within this framework, we explore factors operating at the individual driver, workgroup supervisor, and organizational senior management levels that create a mutually reinforcing system of safety. The health investment framework identifies key factors at the senior manager, supervisor, and driver levels to cultivating a safe working environment. These factors are high-performance workplace systems, leader-member exchange and autonomy, trust and empowerment, respectively. The framework demonstrates the important interactions between these factors and how they create a self-sustaining organizational safety system. The framework aims to provide insight into the future development of interventions that are strategically aligned with the organization and target elements that facilitate and enhance driver safety and ultimately reduce work-related road traffic injury and death.

  14. Development of a High-Fidelity Simulation Environment for Shadow-Mode Assessments of Air Traffic Concepts

    Science.gov (United States)

    Robinson, John E., III; Lee, Alan; Lai, Chok Fung

    2017-01-01

    This paper describes the Shadow-Mode Assessment Using Realistic Technologies for the National Airspace System (SMART-NAS) Test Bed. The SMART-NAS Test Bed is an air traffic simulation platform being developed by the National Aeronautics and Space Administration (NASA). The SMART-NAS Test Bed's core purpose is to conduct high-fidelity, real-time, human-in-the-loop and automation-in-the-loop simulations of current and proposed future air traffic concepts for the United States' Next Generation Air Transportation System called NextGen. The setup, configuration, coordination, and execution of realtime, human-in-the-loop air traffic management simulations are complex, tedious, time intensive, and expensive. The SMART-NAS Test Bed framework is an alternative to the current approach and will provide services throughout the simulation workflow pipeline to help alleviate these shortcomings. The principle concepts to be simulated include advanced gate-to-gate, trajectory-based operations, widespread integration of novel aircraft such as unmanned vehicles, and real-time safety assurance technologies to enable autonomous operations. To make this possible, SNTB will utilize Web-based technologies, cloud resources, and real-time, scalable, communication middleware. This paper describes the SMART-NAS Test Bed's vision, purpose, its concept of use, and the potential benefits, key capabilities, high-level requirements, architecture, software design, and usage.

  15. The Systems Engineering Process for Human Support Technology Development

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    Systems engineering is designing and optimizing systems. This paper reviews the systems engineering process and indicates how it can be applied in the development of advanced human support systems. Systems engineering develops the performance requirements, subsystem specifications, and detailed designs needed to construct a desired system. Systems design is difficult, requiring both art and science and balancing human and technical considerations. The essential systems engineering activity is trading off and compromising between competing objectives such as performance and cost, schedule and risk. Systems engineering is not a complete independent process. It usually supports a system development project. This review emphasizes the NASA project management process as described in NASA Procedural Requirement (NPR) 7120.5B. The process is a top down phased approach that includes the most fundamental activities of systems engineering - requirements definition, systems analysis, and design. NPR 7120.5B also requires projects to perform the engineering analyses needed to ensure that the system will operate correctly with regard to reliability, safety, risk, cost, and human factors. We review the system development project process, the standard systems engineering design methodology, and some of the specialized systems analysis techniques. We will discuss how they could apply to advanced human support systems development. The purpose of advanced systems development is not directly to supply human space flight hardware, but rather to provide superior candidate systems that will be selected for implementation by future missions. The most direct application of systems engineering is in guiding the development of prototype and flight experiment hardware. However, anticipatory systems engineering of possible future flight systems would be useful in identifying the most promising development projects.

  16. Urban Road Traffic Simulation Techniques

    Directory of Open Access Journals (Sweden)

    Ana Maria Nicoleta Mocofan

    2011-09-01

    Full Text Available For achieving a reliable traffic control system it is necessary to first establish a network parameter evaluation system and also a simulation system for the traffic lights plan. In 40 years of history, the computer aided traffic simulation has developed from a small research group to a large scale technology for traffic systems planning and development. In the following thesis, a presentation of the main modeling and simulation road traffic applications will be provided, along with their utility, as well as the practical application of one of the models in a case study.

  17. Digestible information: The impact of Multiple Traffic Light nutritional labeling in a developing country

    OpenAIRE

    Defago, Daniel; Geng, José F.; Molina, Oswaldo; Santa María, Diego

    2017-01-01

    Bad dietary habits are among the main causes of increasing obesity and other health problems. According to the literature, information asymmetry and cognitive biases may lead to suboptimal decisions by individuals regarding food consumption. Many countries have implemented different forms of nutritional labelling in order to provide individuals with better information when making choices. We assess the Multiple Traffic Light (MTL) system, an alternative and simplified labelling format impleme...

  18. Reverse engineering development: Crosstalk opportunities between developmental biology and tissue engineering.

    Science.gov (United States)

    Marcucio, Ralph S; Qin, Ling; Alsberg, Eben; Boerckel, Joel D

    2017-11-01

    The fields of developmental biology and tissue engineering have been revolutionized in recent years by technological advancements, expanded understanding, and biomaterials design, leading to the emerging paradigm of "developmental" or "biomimetic" tissue engineering. While developmental biology and tissue engineering have long overlapping histories, the fields have largely diverged in recent years at the same time that crosstalk opportunities for mutual benefit are more salient than ever. In this perspective article, we will use musculoskeletal development and tissue engineering as a platform on which to discuss these emerging crosstalk opportunities and will present our opinions on the bright future of these overlapping spheres of influence. The multicellular programs that control musculoskeletal development are rapidly becoming clarified, represented by shifting paradigms in our understanding of cellular function, identity, and lineage specification during development. Simultaneously, advancements in bioartificial matrices that replicate the biochemical, microstructural, and mechanical properties of developing tissues present new tools and approaches for recapitulating development in tissue engineering. Here, we introduce concepts and experimental approaches in musculoskeletal developmental biology and biomaterials design and discuss applications in tissue engineering as well as opportunities for tissue engineering approaches to inform our understanding of fundamental biology. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2356-2368, 2017. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  19. The Bologna Process, Globalisation and Engineering Education Developments

    Science.gov (United States)

    Uhomoibhi, James O.

    2009-01-01

    Purpose: The purpose of this paper is to report on the Bologna Process in the light of globalisation and examine how it affects curriculum and engineering education developments. Design/methodology/approach: The growing need for creative competitiveness and the striving for specific profiles of engineering qualifications that are of high quality…

  20. Developing a Vision of Pre-College Engineering Education

    Science.gov (United States)

    Marshall, Jill A.; Berland, Leema K.

    2012-01-01

    We report the results of a study focused on identifying and articulating an ''epistemic foundation'' underlying a pre-collegiate focus on engineering. We do so in the context of UTeach"Engineering" (UTE), a program supported in part by funding by the National Science Foundation and designed to develop a model approach to address the…

  1. Developing a system engineering program to improve performance and reliability

    International Nuclear Information System (INIS)

    Keuter, D.

    1985-01-01

    After several maintenance, operational, and equipment problems last year, Trojan set out on a mission to improve plant performance and reliability by strengthening its on-site engineering organization. This paper presents Trojan's plans in developing an on-site system engineering organization

  2. What Do Final Year Engineering Students Know about Sustainable Development?

    Science.gov (United States)

    Nicolaou, I.; Conlon, E.

    2012-01-01

    This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the…

  3. Development of a full scope reactor engineering simulator

    International Nuclear Information System (INIS)

    Venhuizen, J.R.; Laats, E.T.

    1988-01-01

    An engineering laboratory is pursuing the development of an engineering simulator for use by several agencies of the U.S. Government. According to the authors, this simulator will provide the highest fidelity simulation with initial objectives for studying augmented nuclear reactor operator training, and later for advanced concepts testing as applicable to control room accident diagnosis and management

  4. Towards evolution-guided microbial engineering - tools development and applications

    DEFF Research Database (Denmark)

    Genee, Hans Jasper

    is thedevelopment of highly robust biosensor-based synthetic selection systemsthat enable high-throughput functional interrogation of complexphenotypic libraries. Using the model organism Escherichia coli as a host, Ideploy these systems to i) perform metagenome wide sequenceindependentidentification of novel...... for microbial engineering anddemonstrates direct applications to gene discovery, protein engineering andcell factory development....

  5. Developments in REDES: The Rocket Engine Design Expert System

    Science.gov (United States)

    Davidian, Kenneth O.

    1990-01-01

    The Rocket Engine Design Expert System (REDES) was developed at NASA-Lewis to collect, automate, and perpetuate the existing expertise of performing a comprehensive rocket engine analysis and design. Currently, REDES uses the rigorous JANNAF methodology to analyze the performance of the thrust chamber and perform computational studies of liquid rocket engine problems. The following computer codes were included in REDES: a gas properties program named GASP; a nozzle design program named RAO; a regenerative cooling channel performance evaluation code named RTE; and the JANNAF standard liquid rocket engine performance prediction code TDK (including performance evaluation modules ODE, ODK, TDE, TDK, and BLM). Computational analyses are being conducted by REDES to provide solutions to liquid rocket engine thrust chamber problems. REDES was built in the Knowledge Engineering Environment (KEE) expert system shell and runs on a Sun 4/110 computer.

  6. Developing the Next Generation of Science Data System Engineers

    Science.gov (United States)

    Moses, John F.; Behnke, Jeanne; Durachka, Christopher D.

    2016-01-01

    At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects.The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peermentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breadth of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multidiscipline science and practitioner communities expect to have access to all types of observational data

  7. Developing the Next Generation of Science Data System Engineers

    Science.gov (United States)

    Moses, J. F.; Durachka, C. D.; Behnke, J.

    2015-12-01

    At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects. The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peer mentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breath of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multi-discipline science and practitioner communities expect to have access to all types of observational

  8. Active Involvement of Software Developers in Usability Engineering

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2017-01-01

    The essence of usability evaluations is to produce feedback that supports the downstream utility so the interaction design can be improved and problems can be fixed. In practice, software development organizations experience several obstacles for conducting usability engineering. One suggested...... approach is to train and involve developers in all phases of usability activities from evaluations, to problem reporting, and making redesign proposals. Only limited work has previously investigated the impact of actively involving developers in usability engineering. In this paper, we present two small......, and problem fixing. At the organizational level, we found that the attitude towards and understanding of the role of usability engineering improved....

  9. Considerations for the development of task-based search engines

    DEFF Research Database (Denmark)

    Petcu, Paula; Dragusin, Radu

    2013-01-01

    Based on previous experience from working on a task-based search engine, we present a list of suggestions and ideas for an Information Retrieval (IR) framework that could inform the development of next generation professional search systems. The specific task that we start from is the clinicians......' information need in finding rare disease diagnostic hypotheses at the time and place where medical decisions are made. Our experience from the development of a search engine focused on supporting clinicians in completing this task has provided us valuable insights in what aspects should be considered...... by the developers of vertical search engines....

  10. Research on the Development and Enlightenment of Urban Environmental Engineering

    Science.gov (United States)

    Tian, Mingjing; Li, Guanglou; Zhang, Lu; Shou, Youping; Li, Yajuan; Ye, Wei; Xu, Jing

    2018-04-01

    In recent years, under the promotion of reform and opening up, China's economic development has greatly accelerated, urbanization is also gradually accelerated. In the process of urbanization, there are many problems. The development of environmental engineering is one of the most important points. While building our living environment; we should also pay attention to the implementation of sustainable development strategies. First of all, This paper describes basic situation of environmental engineering, and finally provided some measures to promote the strengthening of China's environmental engineering

  11. The engineering of microprocessor systems guidelines on system development

    CERN Document Server

    1979-01-01

    The Engineering of Microprocessor Systems: Guidelines on System Development provides economical and technical guidance for use when incorporating microprocessors in products or production processes and assesses the alternatives that are available. This volume is part of Project 0251 undertaken by The Electrical Research Association, which aims to give managers and development engineers advice and comment on the development process and the hardware and software needed to support the engineering of microprocessor systems. The results of Phase 1 of the five-phase project are contained in this fir

  12. Engineering for Sustainable Development - An obligatory Skill of the Future Engineer

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Alting, Leo; Molin, Christine

    2003-01-01

    , Bruxelles (Belgium). Department of Manufacturing Engineering and Management hosted a mini-tutorial on Courses and Curricula in Sustainable Development and Environmental Management at the Technical University of Denmark. The procedings comprise papers from universities and institutions in many countries...

  13. Basic and detail engineering development of PTAMB

    International Nuclear Information System (INIS)

    Beuter, Oscar; Reibel, Jose A.; Mirad, Andres E.; Furriel, Miguel; Diaz, L.

    2009-01-01

    The purpose of the future Treatment and Conditioning of Medium and Low Activity Solid and Liquid Waste Plant (PTAMB) of the National Atomic Energy Commission (CNEA) will be to put up medium and low activity solid and liquid waste and to verify the quality of the conditioned waste generated in Ezeiza Atomic Center (CAE), Constituyentes Atomic Center (CAC) and other national producers outside CNEA. The PTAMB is a Class I Radioactive Installation (according to Basic Standard AR 10.1.1, Rev. 3 RNA, paragraphs 17 and 22) also called Relevant Installation. The aim of this document is to list the steps that carried out the Projects Department of the National Program of Radioactive Waste Management (PNGRR) to arrive to the realization of the detailed engineering of the plant. The project is in Public Tender stage and the beginning of the construction would be March 2010. Once built, the Plant will process the radioactive waste contained in the conceptual engineering, offering more precise control of these and their compatibility with the new final disposal systems to build. (author)

  14. Merged ontology for engineering design: Contrasting empirical and theoretical approaches to develop engineering ontologies

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Storga, M

    2009-01-01

    to developing the ontology engineering design integrated taxonomies (EDIT) with a theoretical approach in which concepts and relations are elicited from engineering design theories ontology (DO) The limitations and advantages of each approach are discussed. The research methodology adopted is to map......This paper presents a comparison of two previous and separate efforts to develop an ontology in the engineering design domain, together with an ontology proposal from which ontologies for a specific application may be derived. The research contrasts an empirical, user-centered approach...

  15. Development of engine sound quality for passenger car with 6 cylinder engine; 6 kito engine joyosha no onshoku kazari

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaki, Y; Miyamoto, K; Yamamoto, K [Toyota Motor Corp., Aichi (Japan)

    1997-10-01

    In recent years, the interior noise has been required not only to reduce the sound pressure level, but also to improve the sound quality, especially during acceleration. This paper describes the development of engine sound quality for the new model `ARISTO (GS300)` with in-line 6 gasoline engine. We used the sound simulator in order to evaluate the engine sound quality during acceleration, and decided the target sound. To attain that sound, the light-weighed Piston and connecting rod, and the improvement of intake system are adopted. 7 refs., 13 figs.

  16. Using Visual Simulation Tools And Learning Outcomes-Based Curriculum To Help Transportation Engineering Students And Practitioners To Better Understand And Design Traffic Signal Control Systems

    Science.gov (United States)

    2012-06-01

    The use of visual simulation tools to convey complex concepts has become a useful tool in education as well as in research. : This report describes a project that developed curriculum and visualization tools to train transportation engineering studen...

  17. Protein design in systems metabolic engineering for industrial strain development.

    Science.gov (United States)

    Chen, Zhen; Zeng, An-Ping

    2013-05-01

    Accelerating the process of industrial bacterial host strain development, aimed at increasing productivity, generating new bio-products or utilizing alternative feedstocks, requires the integration of complementary approaches to manipulate cellular metabolism and regulatory networks. Systems metabolic engineering extends the concept of classical metabolic engineering to the systems level by incorporating the techniques used in systems biology and synthetic biology, and offers a framework for the development of the next generation of industrial strains. As one of the most useful tools of systems metabolic engineering, protein design allows us to design and optimize cellular metabolism at a molecular level. Here, we review the current strategies of protein design for engineering cellular synthetic pathways, metabolic control systems and signaling pathways, and highlight the challenges of this subfield within the context of systems metabolic engineering. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. The development and application of CFD technology in mechanical engineering

    Science.gov (United States)

    Wei, Yufeng

    2017-12-01

    Computational Fluid Dynamics (CFD) is an analysis of the physical phenomena involved in fluid flow and heat conduction by computer numerical calculation and graphical display. The numerical method simulates the complexity of the physical problem and the precision of the numerical solution, which is directly related to the hardware speed of the computer and the hardware such as memory. With the continuous improvement of computer performance and CFD technology, it has been widely applied to the field of water conservancy engineering, environmental engineering and industrial engineering. This paper summarizes the development process of CFD, the theoretical basis, the governing equations of fluid mechanics, and introduces the various methods of numerical calculation and the related development of CFD technology. Finally, CFD technology in the mechanical engineering related applications are summarized. It is hoped that this review will help researchers in the field of mechanical engineering.

  19. The Clean Development Mechanism Re-engineered

    DEFF Research Database (Denmark)

    Lütken, Søren

    2016-01-01

    for engineering such mechanism, or indeed reengineering the CDM itself, to make it a viable mitigation financing tool, providing receipts for payments in the form of certified emission reductions (CER). Two solutions are presented, both of which secure new financing for projects that deliver real and measurable...... emissions reduction benefits on the basis of prospective revenues from emissions reduction: one introduces up-front securitization of the emissions reductions; the other builds on a defined value of the CERs without the need for a carbon price or a market for trading. Most of us use simple heuristics...... time. Simply put CERs are not project finance and do not address project capital needs when most needed — upfront. CER based returns are available only after a project is operational. That is why only one third of registered CDM projects went as far as to get their carefully calculated CERs issued...

  20. The development of biomedical engineering as experienced by one biomedical engineer.

    Science.gov (United States)

    Newell, Jonathan C

    2012-12-12

    This personal essay described the development of the field of Biomedical Engineering from its early days, from the perspective of one who lived through that development. It describes the making of a major invention using data that had been rejected by other scientists, the re-discovery of an obscure fact of physiology and its use in developing a major medical instrument, the development of a new medical imaging modality, and the near-death rescue of a research project. The essay concludes with comments about the development and present status of impedance imaging, and recent changes in the evolution of biomedical engineering as a field.

  1. Routing strategies in traffic network and phase transition in network ...

    Indian Academy of Sciences (India)

    3Department of Electronic Engineering, City University of Hong Kong, Hong Kong ... Routing strategy; network traffic flow; hysteretic loop; phase transition from ... ered from two aspects: modifying the underlying network structure or developing ... capacity corresponds to α = −1 in the case of identical nodes' delivering ability.

  2. Impact of commuting exposure to traffic-related air pollution on cognitive development in children walking to school.

    Science.gov (United States)

    Alvarez-Pedrerol, Mar; Rivas, Ioar; López-Vicente, Mònica; Suades-González, Elisabet; Donaire-Gonzalez, David; Cirach, Marta; de Castro, Montserrat; Esnaola, Mikel; Basagaña, Xavier; Dadvand, Payam; Nieuwenhuijsen, Mark; Sunyer, Jordi

    2017-12-01

    A few studies have found associations between the exposure to traffic-related air pollution at school and/or home and cognitive development. The impact on cognitive development of the exposure to air pollutants during commuting has not been explored. We aimed to assess the role of the exposure to traffic-related air pollutants during walking commute to school on cognitive development of children. We performed a longitudinal study of children (n = 1,234, aged 7-10 y) from 39 schools in Barcelona (Catalonia, Spain) who commuted by foot to school. Children were tested four times during a 12-month follow-up to characterize their developmental trajectories of working memory (d' of the three-back numbers test) and inattentiveness (hit reaction time standard error of the Attention Network Test). Average particulate matter ≤2.5 μm (PM 2.5 ), Black Carbon (BC) and NO 2 concentrations were estimated using Land Use Regression for the shortest walking route to school. Differences in cognitive growth were evaluated by linear mixed effects models with age-by-pollutant interaction terms. Exposure to PM 2.5 and BC from the commutes by foot was associated with a reduction in the growth of working memory (an interquartile range increase in PM 2.5 and BC concentrations decreased the annual growth of working memory by 5.4 (95% CI [-10.2, -0.6]) and 4.6 (95% CI [-9.0, -0.1]) points, respectively). The findings for NO 2 were not conclusive and none of the pollutants were associated with inattentiveness. Efforts should be made to implement pedestrian school pathways through low traffic streets in order to increase security and minimize children's exposure to air pollutants. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Road Traffic Injuries

    Institute of Scientific and Technical Information of China (English)

    WANG Zheng-guo

    2005-01-01

    @@ As everybody knows that automobiles have been greatly changing our life. However, everything has two sides, motor vehicles have also caused a huge number of people's deaths, injuries and property damage. Traffic crashes are perhaps the number one public health problem in developed countries [1]. In the United States, pre-retirement years of life lost in traffic crashes are more than that of the two combined leading diseases: cancer and heart disease [1]. Today road traffic crash (RTC) ranks 11th in leading cause of death and accounts for 2.1% of all deaths globally.

  4. Developing an Engineering Design Process Assessment using Mixed Methods.

    Science.gov (United States)

    Wind, Stefanie A; Alemdar, Meltem; Lingle, Jeremy A; Gale, Jessica D; Moore, Roxanne A

    Recent reforms in science education worldwide include an emphasis on engineering design as a key component of student proficiency in the Science, Technology, Engineering, and Mathematics disciplines. However, relatively little attention has been directed to the development of psychometrically sound assessments for engineering. This study demonstrates the use of mixed methods to guide the development and revision of K-12 Engineering Design Process (EDP) assessment items. Using results from a middle-school EDP assessment, this study illustrates the combination of quantitative and qualitative techniques to inform item development and revisions. Overall conclusions suggest that the combination of quantitative and qualitative evidence provides an in-depth picture of item quality that can be used to inform the revision and development of EDP assessment items. Researchers and practitioners can use the methods illustrated here to gather validity evidence to support the interpretation and use of new and existing assessments.

  5. Integration of safety engineering into a cost optimized development program.

    Science.gov (United States)

    Ball, L. W.

    1972-01-01

    A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

  6. Research and development of turbofan engine for supersonic aircraft. Choonsokukiyo turbofan engine no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yashima, S [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1992-01-01

    This paper described the researched results of the demonstrator of a turbofan engine for supersonic aircraft (IHI-17). A turbofan engine with an afterburner was experimentally fabricated and various engine tests have been carried out since 1988. Although the engine size is small, the fighter engine specifications were applied to its design and the prior or simultaneous research on each component was carried out. As a result, the system integration technique by which an engine was assembled by integrating each component could be established. New materials and new manufacturing techniques such as turbine blades of single crystal, turbine disks of powder metallurgy and deep chemical milling for a duct were developed to use for the long term engine test and the prospect to commercialization could be obtained. The following techniques have been established and the results satisfying target specifications could be achieved: the three dimensional aerodynamic design of compressor and turbine, the adoption of air blast fuel atomizer to suppress the smoke generation, an afterburner of spray bar system and the mounting type FADEC (full authority digital electronic control) to control the engine with the afterburner. 4 refs., 15 figs., 4 tabs.

  7. Advanced Engineering Environments for Space Transportation System Development

    Science.gov (United States)

    Thomas, L. Dale; Smith, Charles A.; Beveridge, James

    2000-01-01

    There are significant challenges facing today's launch vehicle industry. Global competition, more complex products, geographically-distributed design teams, demands for lower cost, higher reliability and safer vehicles, and the need to incorporate the latest technologies quicker, all face the developer of a space transportation system. Within NASA, multiple technology development and demonstration projects are underway toward the objectives of safe, reliable, and affordable access to space. New information technologies offer promising opportunities to develop advanced engineering environments to meet these challenges. Significant advances in the state-of-the-art of aerospace engineering practice are envisioned in the areas of engineering design and analytical tools, cost and risk tools, collaborative engineering, and high-fidelity simulations early in the development cycle. At the Marshall Space Flight Center, work has begun on development of an advanced engineering environment specifically to support the design, modeling, and analysis of space transportation systems. This paper will give an overview of the challenges of developing space transportation systems in today's environment and subsequently discuss the advanced engineering environment and its anticipated benefits.

  8. On development of search engine for geodata

    Directory of Open Access Journals (Sweden)

    David Procházka

    2010-01-01

    Full Text Available Effective management and sharing of geodata is one of the priorities of the European Union (INSPIRE activity and companies all around the world. Many different companies and organisations publish their geodata using web mapping services. This situation leads to a multiple publishing of similar or completely same geodata. On the other hand, there is frequently a problem how to determine an appropriate mapserver with the required data. This paper presents a geodata search engine which solves the problem how to access geodata more effectively. Presented solution aggregates data from the different mapservers and provides an interface according to the Open Geospatial Consortium Web Map Server specification. This allows to use our solution in the standard GIS tools as common mapserver. Completely new feature is a request which allows to select map layers which fulfills specified criteria. Selection could be given by keywords in a map layer description and by defining a bounding box on Earth surface. Response is a list of appropriate layers sorted according to their relevance. Presented solution could be among other applications significant source of information for many data mining techniques. It allows to interconnect processed data with their space-temporal context.

  9. Phase 1 Development Testing of the Advanced Manufacturing Demonstrator Engine

    Science.gov (United States)

    Case, Nicholas L.; Eddleman, David E.; Calvert, Marty R.; Bullard, David B.; Martin, Michael A.; Wall, Thomas R.

    2016-01-01

    The Additive Manufacturing Development Breadboard Engine (BBE) is a pressure-fed liquid oxygen/pump-fed liquid hydrogen (LOX/LH2) expander cycle engine that was built and operated by NASA at Marshall Space Flight Center's East Test Area. The breadboard engine was conceived as a technology demonstrator for the additive manufacturing technologies for an advanced upper stage prototype engine. The components tested on the breadboard engine included an ablative chamber, injector, main fuel valve, turbine bypass valve, a main oxidizer valve, a mixer and the fuel turbopump. All parts minus the ablative chamber were additively manufactured. The BBE was successfully hot fire tested seven times. Data collected from the test series will be used for follow on demonstration tests with a liquid oxygen turbopump and a regeneratively cooled chamber and nozzle.

  10. The Global Goals for Sustainable Development in Engineering Education

    DEFF Research Database (Denmark)

    Thuesen, Christian; Geraldi, Joana

    History is full of examples of how engineers for good and bad have invented and implemented technologies, with consequence far beyond their imaginations. Think for instance on the development of the combustion engine which enabled a revolution in transport and individual mobility but at the same...... by across 11 countries conducted among 10,341 respondents finds that engineering indeed played a vital role in creating our past and will continue to play a critical role in shaping our future. While this finding mirrors the common understanding of engineering, the study points to a need to change the role...... students. Our findings from educating more than 500+ students is that the SDGs represent an outstanding tool to convey the importance of engineering and to create a sense of purpose that represent a key driver for motivation. It further it enables collaboration between various disciplines and stimulates...

  11. Non-Toxic Orbital Maneuvering System Engine Development

    Science.gov (United States)

    Green, Christopher; Claflin, Scott; Maeding, Chris; Butas, John

    1999-01-01

    Recent results using the Aestus engine operated with LOx/ethanol propellant are presented. An experimental program at Rocketdyne Propulsion and Power is underway to adapt this engine for the Boeing Reusable Space Systems Division non-toxic Orbital Maneuvering System/Reaction control System (OMS/RCS) system. Daimler-Chrysler Aerospace designed the Aestus as an nitrogen tetroxide/monomethyl hydrazine (NTO/MMH) upper-stage engine for the Ariane 5. The non-toxic OMS/RCS system's preliminary design requires a LOx/ethanol (O2/C2H5OH) engine that operates with a mixture ratio of 1.8, a specific impulse of 323 seconds, and fits within the original OMS design envelope. This paper describes current efforts to meet these requirements including, investigating engine performance using LOx/ethanol, developing the en-ine system sizing package, and meeting the vehicle operation parameters. Data from hot-fire testing are also presented and discussed.

  12. Development of a Simple Traffic Sensor and System with Vehicle Classification Based on PVDF Film Element

    Directory of Open Access Journals (Sweden)

    D. R. SANTOSO

    2011-03-01

    Full Text Available In this paper, piezoelectric sensor system for measuring traffic flow with vehicle classification is proposed and investigated. Sensing element is made of PVDF film, which on both sides plastered with sheets of metal electrodes for making electrical connections. This sensor will generate electric voltage when subjected to mechanical pressure by the wheels of the vehicle. The signal conditioning is required to make sensor output voltage in the range of 0-5 Volts. To classify the types of vehicles crossing the sensor, three-level comparator is used, with specifications of a low voltage reference for motorcycles, medium voltage reference for a family vehicle, and a high voltage reference for buses, trucks and the like. Output of the comparators are already a logic '0' or '1' is then processed by a microcontroller based data acquisition system that the output shows the number and type of vehicles that crossed the road in the form of digital code. These data then transmitted to a control centre that was built based on a PC. At the control centre, traffic data tabulated in the form of measurement database and stored for further analysis.

  13. Linear engine development for series hybrid electric vehicles

    Science.gov (United States)

    Toth-Nagy, Csaba

    This dissertation argues that diminishing oil reserves, concern over global climate change, and desire to improve ambient air quality all demand the development of environment-friendly personal transportation. In certain applications, series hybrid electric vehicles offer an attractive solution to reducing fuel consumption and emissions. Furthermore, linear engines are emerging as a powerplant suited to series HEV applications. In this dissertation, a linear engine/alternator was considered as the auxiliary power unit of a range extender series hybrid electric vehicle. A prototype linear engine/alternator was developed, constructed and tested at West Virginia University. The engine was a 2-stroke, 2-cylinder, dual piston, direct injection, diesel engine. Experiment on the engine was performed to study its behavior. The study variables included mass of the translator, amount of fuel injected, injection timing, load, and stroke with operating frequency and mechanical efficiency as the basis of comparison. The linear engine was analyzed in detail and a simple simulation model was constructed to compare the trends of simulation with the experimental data and to expand on the area where the experimental data were lacking. The simulation was based on a simple and analytical model, rather than a detailed and intensely numerical one. The experimental and theoretical data showed similar trends. Increasing translator mass decreased the operating frequency and increased compression ratio. Larger mass and increased compression ratio improved the ability of the engine to sustain operation and the engine was able to idle on less fuel injected into the cylinder. Increasing the stroke length caused the operating frequency to drop. Increasing fueling or decreasing the load resulted in increased operating frequency. This projects the possibility of using the operating frequency as an input for feedback control of the engine. Injection timing was varied to investigate two different

  14. Engineering for Sustainable Development and the Common Good

    Science.gov (United States)

    Kelly, William E.

    2006-01-01

    In 1994, the American Society of Civil Engineers (ASCE) updated its Code of Ethics to include specific statements on sustainable development and at about the same time, 1994, ASCE adopted its Policy 418 on sustainable development. Sustainable development as defined by ASCE "is the challenge of meeting human needs for natural resources, industrial…

  15. Internal combustion engines a detailed introduction to the thermodynamics of spark and compression ignition engines, their design and development

    CERN Document Server

    Benson, Rowland S

    1979-01-01

    Internal Combustion of Engines: A Detailed Introduction to the Thermodynamics of Spark and Compression Ignition Engines, Their Design and Development focuses on the design, development, and operations of spark and compression ignition engines. The book first describes internal combustion engines, including rotary, compression, and indirect or spark ignition engines. The publication then discusses basic thermodynamics and gas dynamics. Topics include first and second laws of thermodynamics; internal energy and enthalpy diagrams; gas mixtures and homocentric flow; and state equation. The text ta

  16. Development of HANARO engineering simulator (I)

    International Nuclear Information System (INIS)

    Jung, Hoan Sung; Han, G. Y.; Kim, M. J.; Kim, Y. K.; Lee, K. H.; Park, S. J.; Kim, H. K.; Park, J. H.

    2001-01-01

    The simulation models for HANARO have been developed. Core dynamics is modeled by two-point kinetics. Thermal-hydraulic characteristics are also modeled for the primary, secondary, and reflector cooling systems. Control algorithms used in the digital controller are modeled to control the reactor in same manner with the real system. Prototype simulator was implemented to test developed models. The computer system for distributed simulation was prepared

  17. Challenges and solutions in natural gas engine development and productions

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadi, Mahdi; Izanloo, Hossein [Irankhodro Powertrain Co. (IPCO) (Iran)

    2008-07-01

    As an alternative fuel, natural gas is generally accepted for internal combustion engines and some developments have been conducted in order to adopt it for the road vehicles and stationary applications. Foresights shows natural gas vehicles will be a part of the future transportation technology regarding to their mid and long-term benefits. Therefore inherent problems of natural gas engine technology should be overcome to produce a competitive engine. In this paper major problems and their possible solutions in developing and producing natural gas engine for passenger cars are detailed and discussed. Challenging materials are sorted and presented in two categorizes: technical and econo-strategical problems. In the technical section major difficulties faced in components or systems of natural gas engine are analysed in different aspects of design, validation, and production. In addition problems arisen from the fuel characteristics which influence the function and durability of engine are argued. Subjects like freezing in gas regulator, cold start fuel injection, gas leakage, impurities within compressed natural gas, variation in fuel composition, thermo-mechanics of cylinder head and block, wear of valve seat inserts, spark plug erosion, back-fire phenomenon, engine oil quality requirement, low power density and mileage are described. In the econo-strategical discussion, challenges like limited gas distribution infrastructure, lack of specific manufacturing standards and codes, and non-dedicated emission standards are explained. In both part of the paper a comprehensive view is extended to clarify the effect, risk and solutions of each problem. Due to the fact that almost all information and analysis presented in this paper are based on the experience of developing a natural gas engine family, and an extensive literature review, discussions and conclusions could be useful as a guide line for future natural gas engine projects. (orig.)

  18. Development of an engine system simulation software package - ESIM

    Energy Technology Data Exchange (ETDEWEB)

    Erlandsson, Olof

    2000-10-01

    A software package, ESIM is developed for simulating internal combustion engine systems, including models for engine, manifolds, turbocharger, charge-air cooler (inter cooler) and inlet air heater. This study focus on the thermodynamic treatment and methods used in the models. It also includes some examples of system simulations made with these models for validation purposes. The engine model can be classified as a zero-dimensional, single zone model. It includes calculation of the valve flow process, models for heat release and models for in-cylinder, exhaust port and manifold heat transfer. Models are developed for handling turbocharger performance and charge air cooler characteristics. The main purpose of the project related to this work is to use the ESIM software to study heat balance and performance of homogeneous charge compression ignition (HCCI) engine systems. A short description of the HCCI engine is therefore included, pointing out the difficulties, or challenges regarding the HCCI engine, from a system perspective. However, the relations given here, and the code itself, is quite general, making it possible to use these models to simulate spark ignited, as well as direct injected engines.

  19. Engineering research, development and technology: Thrust area report FY 91

    International Nuclear Information System (INIS)

    1991-01-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence, Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) conduct high quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. The thrust area leader is also responsible for carrying out the work that follows from the Engineering Research, Development, and Technology Program so that the results can be applied as early as possible to the needs of LLNL programs. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year, 1991. Its intent is to provide timely summaries of objectives, theories, methods, and results

  20. Human error data collection as a precursor to the development of a human reliability assessment capability in air traffic management

    International Nuclear Information System (INIS)

    Kirwan, Barry; Gibson, W. Huw; Hickling, Brian

    2008-01-01

    Quantified risk and safety assessments are now required for safety cases for European air traffic management (ATM) services. Since ATM is highly human-dependent for its safety, this suggests a need for formal human reliability assessment (HRA), as carried out in other industries such as nuclear power. Since the fundamental aspect of HRA is human error data, in the form of human error probabilities (HEPs), it was decided to take a first step towards development of an ATM HRA approach by deriving some HEPs in an ATM context. This paper reports a study, which collected HEPs via analysing the results of a real-time simulation involving air traffic controllers (ATCOs) and pilots, with a focus on communication errors. This study did indeed derive HEPs that were found to be concordant with other known communication human error data. This is a first step, and shows promise for HRA in ATM, since HEPs have been derived which could be used in safety assessments, although these HEPs are for only one (albeit critical) aspect of ATCOs' tasks (communications). The paper discusses options and potential ways forward for the development of a full HRA capability in ATM

  1. System Engineering and Technical Challenges Overcome in the J-2X Rocket Engine Development Project

    Science.gov (United States)

    Ballard, Richard O.

    2012-01-01

    Beginning in 2006, NASA initiated the J-2X engine development effort to develop an upper stage propulsion system to enable the achievement of the primary objectives of the Constellation program (CxP): provide continued access to the International Space Station following the retirement of the Space Station and return humans to the moon. The J-2X system requirements identified to accomplish this were very challenging and the time expended over the five years following the beginning of the J- 2X effort have been noteworthy in the development of innovations in both the fields for liquid rocket propulsion and system engineering.

  2. Research and development related to the services engineering

    International Nuclear Information System (INIS)

    Rembado, J. L.

    2000-01-01

    In the present paper it is clarified what is understood by the expression R and D, Research and Development in the Servicie Engineering's which support the nuclear power plants exploitation, being more appropriated to talk about Innovation and Technological Development. In this paper it is analysed the need to have an innovation as per the marketing needs and to have a technological development to maintain an independence to let us to keep and increase the company's activity. It is described how the Services Engineering's with technological development turn to equipment suppliers which can be supplied to the nuclear sector as well as to other industrial sectors. Finally, it is described the innovation and technological development evolution, the technological polities objectives and the action lines of Tecnatom, S. A. as a Services Engineering's. (Author)

  3. Engineered barrier development for a nuclear waste repository in basalt

    International Nuclear Information System (INIS)

    Smith, M.J.

    1980-05-01

    The BWIP Engineered Barrier Program has been developed to provide an integrated approach to the development of site-specific Engineered Barrier assemblages for a repository located in basalt. The goal of this program is to specify engineered and natural barriers which will ensure that nuclear and non-radioactive hazardous materials emplaced in a repository in basalt do not exceed acceptable rates of release to the biosphere. A wide range of analytical and experimental activities related to the basalt repository environment, waste package environment, waste/barrier/rock interactions, and barrier performance assessment provide the basis for selection of systems capable of meeting licensing requirements. Work has concentrated on specifying and testing natural and man-made materials which can be used to plug boreholes in basalt and which can be used as multiple barriers to surround nuclear waste forms and containers. The Engineered Barriers Program is divided into two major activities: multiple barrier studies and borehole plugging. 8 figures, 4 tables

  4. Crisis Situations in Engineering Product Development

    DEFF Research Database (Denmark)

    Muenzberg, Christopher; Hammer, Jens; Brem, Alexander

    2016-01-01

    approaches reduce the problem identification time and increase the efficiency of crisis management. The goal of this research is to identify methods which are able to support the crisis management process successfully. Therefore, a literature-based analysis of developing methods, especially TRIZ is conducted......Crisis situations are special situations during the development process. They are characterized by time and handling pressure. Therefore, it is necessary to identify and apply a methodical problem solving approach to overcome these situations. Due to their prescriptive character, problem solving...

  5. Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources

    OpenAIRE

    Penlington, Roger; Steiner, Simon

    2014-01-01

    This repository of teaching and learning resources is a companion to the 2nd edition of “An Introduction to Sustainable Development in the Engineering Curriculum”, by Roger Penlington and Simon Steiner, originally created by The Higher Education Academy Engineering Subject Centre, Loughborough University. \\ud The purpose of this collection of teaching and learning re-sources is to provide access, with a brief resumé, to materials in curricula reform, recognition awards, and university movemen...

  6. Development of human factors engineering guide for nuclear power project

    International Nuclear Information System (INIS)

    Wu Dangshi; Sheng Jufang

    1997-01-01

    'THE PRACTICAL GUIDE FOR APPLICATION OF HUMAN FACTORS ENGINEERING TO NUCLEAR POWER PROJECT (First Draft, in Chinese)', which was developed under a research program sponsored by National Nuclear Safety Administration (NNSA) is described briefly. It is hoped that more conscious, more systematical and more comprehensive application of Human Factors Engineering to the nuclear power projects from the preliminary feasibility studies up to the commercial operation will benefit the safe, efficient and economical operations of nuclear power plants in China

  7. Turbulence models development and engineering applications

    International Nuclear Information System (INIS)

    Groetzbach, G.; Ammann, T.; Dorr, B.; Hiltner, I.; Hofmann, S.; Kampczyk, M.; Kimhi, Y.; Seiter, C.; Woerner, M.; Alef, M.; Hennemuth, A.

    1995-01-01

    The FLUTAN code is used for analyzing the decay heat removal in new reactor concepts. The turbulence models applied in FLUTAN are improved by the development of the TURBIT code. TURBIT serves for a numerical simulation of turbulent channel flow. (orig.)

  8. Concurrent Engineering in seafood product development

    DEFF Research Database (Denmark)

    Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

    1998-01-01

    benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...... techniques. it is anticipated that other food industries also can benefit from the more simultaneous approach...

  9. Development of Toyota new 1GZ-FE engine; Shingata V12 gasoline engine no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H; Asahi, T; Goto, M; Endo, K; Terada, M [Toyota Motor Corp., Aichi (Japan)

    1997-10-01

    The first V-12 cylinder engine for passenger car in Japan, the 1GZ-FE, which is the status of high luxury vehicles has been developed. In order to proceed the merit of V-12 cylinder engine, Intelligent Variable Valve Timing (VVT-i) system, Slant squish combustion chamber, Iridium pole spark plug and Intelligent electronic throttle control system were introduced. Through these features this new 1GZ-FE has achieved an overwhelming smoothness and quietness and yet highest torque among the same displacement engine at low and medium engine speed. Additionally the 1GZ-FE achieved good fuel economy and high reliability which exceed any other competitors. 14 refs., 4 figs.

  10. A Life-Cycle Cost Estimating Methodology for NASA-Developed Air Traffic Control Decision Support Tools

    Science.gov (United States)

    Wang, Jianzhong Jay; Datta, Koushik; Landis, Michael R. (Technical Monitor)

    2002-01-01

    This paper describes the development of a life-cycle cost (LCC) estimating methodology for air traffic control Decision Support Tools (DSTs) under development by the National Aeronautics and Space Administration (NASA), using a combination of parametric, analogy, and expert opinion methods. There is no one standard methodology and technique that is used by NASA or by the Federal Aviation Administration (FAA) for LCC estimation of prospective Decision Support Tools. Some of the frequently used methodologies include bottom-up, analogy, top-down, parametric, expert judgement, and Parkinson's Law. The developed LCC estimating methodology can be visualized as a three-dimensional matrix where the three axes represent coverage, estimation, and timing. This paper focuses on the three characteristics of this methodology that correspond to the three axes.

  11. Road traffic and other unintentional injuries among travelers to developing countries

    Science.gov (United States)

    Stewart, Barclay; Yankson, Isaac Kofi; Afukaar, Francis; Medina, Martha Hijar; Cuong, Pham Viet; Mock, Charles

    2015-01-01

    Synopsis Injuries result in nearly 6 million deaths and incur 52 million disability-adjusted life years annually, comprising 15% of the global disease burden. More than 90% of this burden occurs in low- and middle-income countries (LMICs). Given this burden, it’s not unexpected that injuries are the leading cause of death among travelers to LMICs, namely from road traffic crashes and drowning. Opportunely, the majority of injuries are preventable. Therefore, pre-travel advice regarding foreseeable dangers and how to avoid them may significantly mitigate injury risk, such as: wearing seatbelts, helmets and personal flotation devices when appropriate; responsibly consuming alcohol; and closely supervising children. Upon return, travelers to LMICs are in a unique position; having shared injury risks while abroad, travelers can advocate for injury control initiatives that might make the world safer for travelers and local populations alike. PMID:26900117

  12. The future development of worldwide goods traffic and its impact on drive technologies; Die zukuenftige Entwicklung des weltweiten Guetertransports und ihre Auswirkungen auf die Antriebe

    Energy Technology Data Exchange (ETDEWEB)

    Pachta-Reyhofen, Georg [MAN SE (Germany)

    2011-07-01

    Moving forward, worldwide goods traffic will continue to see strong growth. The scarcity of fossil fuels and the need for ecologically sustainable mobility are the two main challenges facing goods traffic of the future. Current emission regulations are primarily aimed at pollutants, and have already succeeded in reducing them sharply. With Euro VI, the first commercial vehicle to be almost free of pollutants will be a reality in the European commercial vehicles sector from 2014 onward. Creating incentives to replace old vehicles with new, more efficient ones could boost the effect substantially. Similar progress has been yielded in the maritime traffic segment, though the biggest hurdle is yet to come in the form of IMO Tier III. Retrofit solutions in particular make sense here, given the long lifecycles of ships. The strong focus on pollutants has led to reduction of consumption being neglected. Fuel consumption in the truck industry has stagnated in the last ten years. We desperately need to rethink things here. Solutions to boost efficiency in long-distance truck traffic primarily lie in aerodynamics and optimization of shipping volumes. However, legal restrictions on length need to be eased throughout the whole of Europe in order to leverage major potential for reduction. By contrast, hybrid technology will catch on in the medium term for commercial vehicles in downtown traffic since it allows energy from braking to be recuperated. The use of second-generation biofuels in the commercial vehicles industry and gaseous fuels in the marine sector offer major potential for reducing CO{sub 2}. The technological course has been determined - the diesel engine will play a dominant role in worldwide goods traffic in the future too. (orig.)

  13. System reliability developments in structural engineering

    International Nuclear Information System (INIS)

    Moses, F.

    1982-01-01

    Two major limitations occur in present structural design code developments utilizing reliability theory. The notional system reliabilities may differ significantly from calibrated component reliabilities. Secondly, actual failures are often due to gross errors not reflected in most present code formats. A review is presented of system reliability methods and further new concepts are developed. The incremental load approach for identifying and expressing collapse modes is expanded by employing a strategy to identify and enumerate the significant structural collapse modes. It further isolates the importance of critical components in the system performance. Ductile and brittle component behavior and strength correlation is reflected in the system model and illustrated in several examples. Modal combinations for the system reliability are also reviewed. From these developments a system factor can be addended to component safety checking equations. Values may be derived from system behavior by substituting in a damage model which accounts for the response range from component failure to collapse. Other strategies are discussed which emphasize quality assurance during design and in-service inspection for components whose behavior is critical to the system reliability. (Auth.)

  14. Development of decommissioning system engineering technology

    International Nuclear Information System (INIS)

    Lee, K. W.; Kim, S. K.; Seo, B. K.

    2012-02-01

    In the decommissioning planning stage, it is important to select the optimized decommissioning process considering the cost and safety. Especially the selection of the optimized decommissioning process is necessary because it affects to improve worker's safety and decommissioning work efficiency. The decommissioning process evaluation technology can provide the optimized decommissioning process as constructing various decommissioning scenarios and it can help to prevent the potential accidents as delivering the exact work procedures to workers and to help workers to perform decommissioning work skillfully. It's necessary to measure the radioactive contamination in the highly contaminated facilities such as hot-cells or glove-boxes to be decommissioned for decommissioning planning. These facilities are very high radiation level, so it is difficult to approach. In this case the detector system is preferable to separate the sensor and electronics, which have to locate in the facility outside to avoid the electric noise and worker's radiation exposure. In this project, we developed the remote detection system for radiation measurement and signal transmission in the high radiation area. In order to minimize worker's exposure when decommissioning highly activated nuclear facilities, it is necessary to develop the remote handling tool to perform the dismantling work remotely. Especially, since cutting, measuring, and decontamination works should be performed remotely in the highly activated area, the remote handling tool for conducting these works should be developed. Therefore, the multi-purpose dismantling machine that can measuring dose, facility cutting, and remote handling for maintenance and decommissioning of highly activated facility should be needed

  15. Developing a new industrial engineering curriculum using a systems engineering approach

    Science.gov (United States)

    Buyurgan, Nebil; Kiassat, Corey

    2017-11-01

    This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

  16. Software Engineering Research/Developer Collaborations in 2005

    Science.gov (United States)

    Pressburger, Tom

    2006-01-01

    In CY 2005, three collaborations between software engineering technology providers and NASA software development personnel deployed three software engineering technologies on NASA development projects (a different technology on each project). The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report. Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Also included is an acronym list.

  17. Systems Engineering Education Development(SEED)Case Study

    Science.gov (United States)

    Bagg, Thomas C., III; Brumfield, Mark D.; Jamison, Donald E.; Granata, Raymond L.; Casey, Carolyn A.

    2003-01-01

    The Systems Engineering Development Program (SEED) was initiated to help Goddard resolve a Systems Engineering skill shortage. The chronology of events and the experiences of the pilot program are outlined to describe the development of the present program. The program goals are included in order to give a focus on what the developers saw as the program drivers. Lessons learned from a pilot program were incorporated into the present program. This program is constantly learning from its past efforts and looks for continuous improvement. We list several future ideas for improvement and change.

  18. The contribution of bacterial genome engineering to sustainable development.

    Science.gov (United States)

    Reuß, Daniel R; Commichau, Fabian M; Stülke, Jörg

    2017-09-01

    The United Nations' Sustainable Development Goals define important challenges for the prosperous development of mankind. To reach several of these goals, among them the production of value-added compounds, improved economic and ecologic balance of production processes, prevention of climate change and protection of ecosystems, the use of engineered bacteria can make valuable contributions. We discuss the strategies for genome engineering and how they can be applied to meet the United Nations' goals for sustainable development. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  19. Discussion on the Development of Green Chemistry and Chemical Engineering

    Science.gov (United States)

    Zhang, Yunshen

    2017-11-01

    Chemical industry plays a vital role in the development process of national economy. However, in view of the special nature of the chemical industry, a large number of poisonous and harmful substances pose a great threat to the ecological environment and human health in the entire process of raw material acquisition, production, transportation, product manufacturing, and the final practical application. Therefore, it is a general trend to promote the development of chemistry and chemical engineering towards a greener environment. This article will focus on some basic problems occurred in the development process of green chemistry and chemical engineering.

  20. Case studies for developing globally responsible engineers

    OpenAIRE

    Global Dimension in Engineering Education

    2015-01-01

    Document realitzat amb un ajut financer de la Unió Europea. Per poder accedir al material complementari per a docents dels 28 casos estudi que formen el llibre, activeu el "Document relacionat" Col·lecció de 28 casos estudi per a professors d'enginyeria: 1. Rural development and planning in LDCs: the “Gamba Deve – Licoma axis”,district of Caia, Mozambique 2. Reducing the impact of soil erosion and reservoir siltation on agricultural production and water availability: the case stu...

  1. Systems Engineering Technical Leadership Development Program

    Science.gov (United States)

    2012-08-30

    a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE 30 AUG...topics and elements were collected from a wide variety of sources, including NASA6, Nokia , BAE Systems, the DoD, and the Australian government to develop...WHS TOO009 RT0004 Report No. SERC-2012-TR-034-1 August 30, 2012 UNCLASSIFIED 17 solutions to pursue and why they should be built. 2. Help teams

  2. Developing a Conceptual Design Engineering Toolbox and its Tools

    Directory of Open Access Journals (Sweden)

    R. W. Vroom

    2004-01-01

    Full Text Available In order to develop a successful product, a design engineer needs to pay attention to all relevant aspects of that product. Many tools are available, software, books, websites, and commercial services. To unlock these potentially useful sources of knowledge, we are developing C-DET, a toolbox for conceptual design engineering. The idea of C-DET is that designers are supported by a system that provides them with a knowledge portal on one hand, and a system to store their current work on the other. The knowledge portal is to help the designer to find the most appropriate sites, experts, tools etc. at a short notice. Such a toolbox offers opportunities to incorporate extra functionalities to support the design engineering work. One of these functionalities could be to help the designer to reach a balanced comprehension in his work. Furthermore C-DET enables researchers in the area of design engineering and design engineers themselves to find each other or their work earlier and more easily. Newly developed design tools that can be used by design engineers but have not yet been developed up to a commercial level could be linked to by C-DET. In this way these tools can be evaluated in an early stage by design engineers who would like to use them. This paper describes the first prototypes of C-DET, an example of the development of a design tool that enables designers to forecast the use process and an example of the future functionalities of C-DET such as balanced comprehension.

  3. Engineering Ethics Education from the Viewpoint of Development Psychology

    Science.gov (United States)

    Hamazaki, Takashi

    This paper is outline for the development of children's mind in modern family and school, and is reviewed on the development theory of morality and prosociality related to engineering ethics education. In particular we are reviewed on the discipline and education of morality and prosociality from infancy to adulthood.

  4. Where Is "Community"?: Engineering Education and Sustainable Community Development

    Science.gov (United States)

    Schneider, J.; Leydens, J. A.; Lucena, J.

    2008-01-01

    Sustainable development initiatives are proliferating in the US and Europe as engineering educators seek to provide students with knowledge and skills to design technologies that are environmentally sustainable. Many such initiatives involve students from the "North," or "developed" world building projects for villages or…

  5. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  6. Dual deflectable beam strip engine development.

    Science.gov (United States)

    Dulgeroff, C. R.; Zuccaro, D. E.; Kami, S.; Schnelker, D. E.; Ward, J. W.

    1972-01-01

    This paper describes a dual beam thruster that has been designed, constructed, and tested. The system is suitable for two-axes attitude control and is comprised of two orthogonal strips, each capable of producing 0.30 mlb thrust and beam deflections of more than plus or minus 20 deg. The nominal specific impulse for the thruster is 5000 sec, and the thrust level from each strip can be varied from 0 to 100%. Neutralizer filaments that were developed and life tested over 2000 hours producing more than 40 mA of electron emission per watt of input power are also discussed. The system power required for clean ionizers is approximately 200 W.

  7. Development of Czechoslovak nuclear power engineering

    International Nuclear Information System (INIS)

    Keher, J.

    1985-01-01

    The output of Czechoslovak nuclear power plants is envisaged at 2200 MW by 1985, 4400 MW by 1990 and 10,280 MW by the year 2000. The operation so far is assessed of Bohunice V-1 and Bohunice V-2 power plants as is the construction of the Dukovany nuclear power plant. International cooperation in the fulfilment of the nuclear power programme is based on the General Agreement on Cooperation in the Prospective Development and Interlinkage of CMEA Power Systems to the year 1990, the Agreement on Multilateral International Specialization and Cooperation of Production and on Mutual Deliveries of Nuclear Power Plant Equipment. The most important factor in international cooperation is the Programme of Cooperation between the CSSR and the USSR. The primary target in the coming period is the Temelin nuclear power plant project and the establishment of unified control of the nuclear power complex. (M.D.)

  8. THE DEVELOPMENT OF A STRATEGIC INDUSTRIAL ENGINEERING PHILOSOPHY

    Directory of Open Access Journals (Sweden)

    P. Leonard

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: The proposed expansion of the Industrial Engineering discipline, termed Strategic Industrial Engineering, holds that scientific industrial engineering knowledge may be applied to capitalistic systems with the strategic goal of maximising wealth for the corporate shareholders. This paper provides an overview of the development of such a Strategic Industrial Engineering Philosophy and discusses the possible application of this philosophy in improving the capital productivity of an organisation.

    AFRIKAANSE OPSOMMING: Die voorgestelde uitbreiding van die Bedryfsingenieurswesedissipline, genaamd Strategiese Bedryfsingenieurswese, beweer dat wetenskaplike bedryfsingenieurswesekennis toegepas mag word op kapitalistiese stelsels met die maksimisering van welvaart vir die korporatiewe aandeelhouers as die strategiese doelwit. Hierdie artikel verskaf ’n oorsig van die ontwikkeling van so ’n Strategiese Bedryfsingenieurswesefilosofie en bespreek die moontlike toepassing van hierdie filosofie in die verbetering van die kapitaalproduktiwiteit van ’n onderneming.

  9. Benefits of reverse engineering technologies in software development makerspace

    Directory of Open Access Journals (Sweden)

    Aabidi M.H.

    2017-01-01

    Full Text Available In the recent decades, the amount of data produced by scientific, engineering, and life science applications has increased with several orders of magnitude. In parallel with this development, the applications themselves have become increasingly complex in terms of functionality, structure, and behavior. In the same time, development and production cycles of such applications exhibit a tendency of becoming increasingly shorter, due to factors such as market pressure and rapid evolution of supporting and enabling technologies. As a consequence, an increasing fraction of the cost of creating new applications and manufacturing processes shifts from the creation of new artifacts to the adaption of existing ones. A key component of this activity is the understanding of the design, operation, and behavior of existing manufactured artifacts, such as software code bases, hardware systems, and mechanical assemblies. For instance, in the software industry, it is estimated that maintenance costs exceed 80% of the total costs of a software product's lifecycle, and software understanding accounts for as much as half of these maintenance costs. To facilitate the software development process, it would be ideal to have tools that automatically generate or help to generate UML (Unified Modeling Language models from source code. Reverse engineering the software architecture from source code provides a valuable service to software practitioners. Case tools implementing MDA and reverse-engineering constitute an important opportunity of software development engineers. So MDA and reverse engineering is an important key witch make makerspace more productive and more efficient.

  10. Road Transport Policy And Traffic Management In Nigeria ...

    African Journals Online (AJOL)

    Road Transport Policy And Traffic Management In Nigeria. ... the attitude of the road driver to traffic engineering, control and management requirement. ... sources of data collection with simple percentage method of analysis and system theory ...

  11. Performance evaluation of traffic sensing and control devices.

    Science.gov (United States)

    2011-01-01

    High quality vehicle detection is essential to properly operate actuated phases at traffic signals and to facilitate effective : management of technician and engineering resources. INDOT operates over 2600 traffic signal controllers, approximately 20...

  12. Bicycle traffic in urban areas

    Directory of Open Access Journals (Sweden)

    Anđelković Zorica

    2015-01-01

    Full Text Available Cycling is a term describing the use of bicycles, but also any mean of transport driven solely by human power. Development of bicycle traffic in urban areas involves construction of cycling infrastructure, adapting streets and other traffic infrastructure to a form suitable for cycling and other means of transport (individual motorized traffic, public transport, walking, ensuring the adequate budget and systematic planning and development of sustainable transport in cities. The paper presents basic settings and conditions as input elements to plan bicycle traffic in urban areas, as well as program- design conditions which lead the activities of planners and designers of urban roads in connection with cyclists.

  13. DEVELOPMENT OF OPERATING DRIVE SYSTEMS IN ENGINEERING EQUIPMENT

    Directory of Open Access Journals (Sweden)

    A. A. Kotlobai

    2015-01-01

    Full Text Available Engineering machines being in operational service with military units of  engineer troops are fit to their purpose and their application is relevant in modern conditions. Maintenance of operating conditions in engineering equipment which was produced earlier by the USSR enterprises is considered as a rather complicated task due to lack of spare parts because their production has been discontinued.One of the approaches used for maintenance of engineering equipment combat capabilities is modernization of operating drive systems that presupposes replacement of mechanical systems in working element drives by hydrostatic drives which are realized while using modern element base. Usage of hydraulic units in drive systems being in mass production for replacement of mechanical systems manufactured earlier in small batches makes it possible to reduce labour inputs for maintenance and repair of machines. The paper presents some possibilities for development of operating drive systems in engineering equipment. The proposed approach is given through an example of  engineering obstacle-clearing vehicle (IMR-2M and excavation machines (MDK-3 and MDK-2M.Application of a hydraulic drive in working elements of the excavation machines permits to withdraw from cardan  shafts, a gear box, a rotary gear and an overload clutch. A hydraulic motor of the cutter and thrower drive is mounted  on a working element gearbox. While executing modernization of hydraulic systems in excavation machines a pump unit has been proposed for the cutter and thrower drive which consists of a controlled pump and a system for automatic maintenance of the pump operational parameters. While developing the operating drive systems in engineering equipment in accordance with the proposed requirements it is possible to simplify drive systems of working elements and  ensure reliable machinery operation in the units of engineer troops. 

  14. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  15. Policy Diversity as an Engine of Development

    Directory of Open Access Journals (Sweden)

    Daniel Daianu

    2004-06-01

    policy diversity to operate as a means to foster economic development; that there might be a paradigmatic cycle in the dynamic of economic policies

  16. Developments in environmental and engineering law in 1990

    International Nuclear Information System (INIS)

    Brandner, T.

    1991-01-01

    The detailed and clear compilation for the period 1.1.1990-31.1.1991 covers the following topics: Environmental and engineering law in the German unification process; superordinate developments in the EG and in Germany, in particular: Draft Federal Environmental Code, Civil Environmental Liability Act, EIA, German Federal Environmental Foundation; technological safety; climate protection - international agreements, EC law, developments in Germany; air and noise pollution control law; atomic and radiation protection law - point of departure, legislation, individual questions: Federal supervision, nuclear disposal and recycling. Moreover: Environmental concerns in regional planning; the law of nature conservation, water protection, waste management, hazardous materials, genetic engineering and soil protection. (HSCH) [de

  17. Quality functions for requirements engineering in system development methods.

    Science.gov (United States)

    Johansson, M; Timpka, T

    1996-01-01

    Based on a grounded theory framework, this paper analyses the quality characteristics for methods to be used for requirements engineering in the development of medical decision support systems (MDSS). The results from a Quality Function Deployment (QFD) used to rank functions connected to user value and a focus group study were presented to a validation focus group. The focus group studies take advantage of a group process to collect data for further analyses. The results describe factors considered by the participants as important in the development of methods for requirements engineering in health care. Based on the findings, the content which, according to the user a MDSS method should support is established.

  18. NTRCI Legacy Engine Research and Development Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith-Holbert, Connie [National Transportation Research Center, Inc., Knoxville, TN (United States); Petrolino, Joseph [National Transportation Research Center, Inc., Knoxville, TN (United States); Watkins, Bart [Power Source Technologies Inc., Corvallis, OR (United States); Irick, David [Power Source Technologies Inc., Corvallis, OR (United States)

    2011-12-31

    The Legacy engine is a completely new design, transitional diesel engine, replacing the reciprocating engine with a rotary engine. The Legacy engine offers significant advances over conventional internal combustion engines in 1) power to weight ratio; 2) multiple fuel acceptance; 3) fuel economy; and 4) environmental compliance. These advances are achieved through a combination of innovative design geometry, rotary motion, aspiration simplicity, and manufacturing/part simplicity. The key technical challenge to the Legacy engine's commercialization, and the focus of this project, was the development of a viable roton tip seal. The PST concept for the roton tip seal was developed into a manufacturable design. The design was evaluated using a custom designed and fabricated seal test fixture and further refined. This design was incorporated into the GEN2.5A prototype and tested for achievable compression pressure. The Decision Point at the end of Phase 1 of the project (described below) was to further optimize the existing tip seal design. Enhancements to the tip seal design were incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Compression pressures adequate for compression ignition of diesel fuel were achieved, although not consistently in all combustion volumes. The variation in compression pressures was characterized versus design features. As the roton tip seal performance was improved, results pointed toward inadequate performance of the housing side seals. Enhancement of the housing side seal system was accomplished using a custom designed side seal test fixture. The design enhancements developed with the test fixture were also incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Finally, to simplify the requirements for the roton tip seals and to enhance the introduction and combustion of fuel, a flush-mount fuel injector

  19. Architecture independent environment for developing engineering software on MIMD computers

    Science.gov (United States)

    Valimohamed, Karim A.; Lopez, L. A.

    1990-01-01

    Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

  20. Sustainable Development as a Meta-Context for Engineering Education

    Directory of Open Access Journals (Sweden)

    Karel Mulder

    2013-12-01

    Full Text Available At the end of the first decade of the twenty-first century, there is unprecedented awareness of the need for a transformation in development, to meet the needs of the present while also preserving the ability of future generations to meet their own needs. However, within engineering, educators still tend to regard such development as an ‘aspect’ of engineering rather than an overarching meta-context, with ad hoc and highly variable references to topics. Furthermore, within a milieu of interpretations there can appear to be conflicting needs for achieving sustainable development, which can be confusing for students and educators alike. Different articulations of sustainable development can create dilemmas around conflicting needs for designers and researchers, at the level of specific designs and (sub- disciplinary analysis. Hence sustainability issues need to be addressed at a meta-level using a whole of system approach, so that decisions regarding these dilemmas can be made. With this appreciation, and in light of curriculum renewal challenges that also exist in engineering education, this paper considers how educators might take the next step to move from sustainable development being an interesting ‘aspect’ of the curriculum, to sustainable development as a meta-context for curriculum renewal. It is concluded that capacity building for such strategic considerations is critical in engineering education.

  1. Development of Implantable Medical Devices: From an Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Yeun-Ho Joung

    2013-09-01

    Full Text Available From the first pacemaker implant in 1958, numerous engineering and medical activities for implantable medical device development have faced challenges in materials, battery power, functionality, electrical power consumption, size shrinkage, system delivery, and wireless communication. With explosive advances in scientific and engineering technology, many implantable medical devices such as the pacemaker, cochlear implant, and real-time blood pressure sensors have been developed and improved. This trend of progress in medical devices will continue because of the coming super-aged society, which will result in more consumers for the devices. The inner body is a special space filled with electrical, chemical, mechanical, and marine-salted reactions. Therefore, electrical connectivity and communication, corrosion, robustness, and hermeticity are key factors to be considered during the development stage. The main participants in the development stage are the user, the medical staff, and the engineer or technician. Thus, there are three different viewpoints in the development of implantable devices. In this review paper, considerations in the development of implantable medical devices will be presented from the viewpoint of an engineering mind.

  2. Traffic Games: Modeling Freeway Traffic with Game Theory.

    Science.gov (United States)

    Cortés-Berrueco, Luis E; Gershenson, Carlos; Stephens, Christopher R

    2016-01-01

    We apply game theory to a vehicular traffic model to study the effect of driver strategies on traffic flow. The resulting model inherits the realistic dynamics achieved by a two-lane traffic model and aims to incorporate phenomena caused by driver-driver interactions. To achieve this goal, a game-theoretic description of driver interaction was developed. This game-theoretic formalization allows one to model different lane-changing behaviors and to keep track of mobility performance. We simulate the evolution of cooperation, traffic flow, and mobility performance for different modeled behaviors. The analysis of these results indicates a mobility optimization process achieved by drivers' interactions.

  3. Development of a Framework for the Evaluation of the Environmental Benefits of Controlled Traffic Farming

    Directory of Open Access Journals (Sweden)

    Abdul Mounem Mouazen

    2015-07-01

    Full Text Available Although controlled traffic farming (CTF is an environmentally friendly soil management system, no quantitative evaluation of environmental benefits is available. This paper aims at establishing a framework for quantitative evaluation of the environmental benefits of CTF, considering a list of environmental benefits, namely, reducing soil compaction, runoff/erosion, energy requirement and greenhouse gas emission (GHG, conserving organic matter, enhancing soil biodiversity and fertiliser use efficiency. Based on a comprehensive literature review and the European Commission Soil Framework Directive, the choice of and the weighting of the impact of each of the environmental benefits were made. The framework was validated using data from three selected farms. For Colworth farm (Unilever, UK, the framework predicted the largest overall environmental benefit of 59.3% of the theoretically maximum achievable benefits (100%, as compared to the other two farms in Scotland (52% and Australia (47.3%. This overall benefit could be broken down into: reducing soil compaction (24%, tillage energy requirement (10% and GHG emissions (3%, enhancing soil biodiversity (7% and erosion control (6%, conserving organic matter (6%, and improving fertiliser use efficiency (3%. Similar evaluation can be performed for any farm worldwide, providing that data on soil properties, topography, machinery, and weather are available.

  4. Analysis of projects development of enterprises in engineering industries in Khmelnytskyi region

    OpenAIRE

    SHKODA M.S.

    2012-01-01

    This article analyzes the use of development projects in the engineering industry of Khmelnitsky region. The current state of engineering field. Solves warehouse development projects engineering enterprises and activities to enhance their implementation.

  5. Career development in Bioengineering/Biomedical Engineering: a student's roadmap.

    Science.gov (United States)

    Abu-Faraj, Ziad O

    2008-01-01

    Bioengineering/biomedical engineering education has progressed since the late 1950s and is still evolving in leading academic institutions worldwide. Today, Bioengineering/Biomedical Engineering is acclaimed as one of the most reputable fields within the global arena, and will likely be the catalyst for any future breakthroughs in Medicine and Biology. This paper provides a set of strategies and recommendations to be pursued by individuals aiming at planning and developing careers in this field. The paper targets the international student contemplating bioengineering/biomedical engineering as a career, with an underlying emphasis on the student within developing and transitional countries where career guidance is found deficient. The paper also provides a comprehensive definition of the field and an enumeration of its subdivisions.

  6. Nuclear engineering education: A competence based approach to curricula development

    International Nuclear Information System (INIS)

    2014-01-01

    Maintaining nuclear competencies in the nuclear industry is a one of the most critical challenges in the near future. With the development of a number of nuclear engineering educational programmes in several States, this publication provides guidance to decision makers in Member States on a competence based approach to curricula development, presenting the established practices and associated requirements for educational programmes in this field. It is a consolidation of best practices that will ensure sustainable, effective nuclear engineering programmes, contributing to the safe, efficient and economic operation of nuclear power plants. The information presented is drawn from a variety of recognized nuclear engineering programmes around the world and contributes to the main areas that are needed to ensure a viable and robust nuclear industry

  7. Using a systems engineering process to develop engineered barrier system design concepts

    International Nuclear Information System (INIS)

    Jardine, L.J.; Short, D.W.

    1991-05-01

    The methodology used to develop conceptual designs of the engineered barrier system and waste packages for a geologic repository is based on an iterative systems engineering process. The process establishes a set of general mission requirements and then conducts detailed requirements analyses using functional analyses, system concept syntheses, and trade studies identifications to develop preliminary system concept descriptions. The feasible concept descriptions are ranked based on selection factors and criteria and a set of preferred concept descriptions is then selected for further development. For each of the selected concept descriptions, a specific set of requirements, including constraints, is written to provide design guidance for the next and more detailed phase of design. The process documents all relevant waste management system requirements so that the basis and source for the specific design requirements are traceable and clearly established. Successive iterations performed during design development help to insure that workable concepts are generated to satisfy the requirements. 4 refs., 2 figs

  8. The development and application of engineered proteins for bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Trewhella, J. [ed.

    1995-09-26

    Clean up of the toxic legacy of the Cold War is projected to be the most expensive domestic project the nation has yet undertaken. Remediation of the Department of Energy and Department of Defense toxic waste sites alone are projected to cost {approximately}$1 trillion over a 20-30 year period. New, cost effective technologies are needed to attack this enormous problem. Los Alamos has put together a cross-divisional team of scientist to develop science based bioremediation technology to work toward this goal. In the team we have expertise in: (1) molecular, ecosystem and transport modeling; (2) genetic and protein engineering; (3) microbiology and microbial ecology; (4) structural biology; and (5) bioinorganic chemistry. This document summarizes talks at a workshop of different aspects of bioremediation technology including the following: Introducing novel function into a Heme enzyme: engineering by excavation; cytochrome P-450: ideal systems for bioremediation?; selection and development of bacterial strains for in situ remediation of cholorinated solvents; genetic analysis and preparation of toluene ortho-monooxygenase for field application in remediation of trichloroethylene; microbial ecology and diversity important to bioremediation; engineering haloalkane dehalogenase for bioremediation; enzymes for oxidative biodegradation; indigenous bacteria as hosts for engineered proteins; performance of indigenous bacterial, hosting engineered proteins in microbial communities.

  9. Development of security engineering curricula at US universities

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.

    1998-08-01

    The Southwest Surety Institute was formed in June 1996 by Arizona State University (ASU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL) to provide educational programs in Security Engineering, and to conduct research and development in security technologies. This is the first science-based program of its kind in the US, focused on educating Security Engineers to help government and industry address their security needs. Each member brings a unique educational capability to the Institute. NM Tech has a formidable explosives testing and evaluation facility. ASU is developing a Masters program in Security Engineering at their School of Technology located on a new campus in Mesa, Arizona. NMSU provides a Security Technology minor, merging programs in Criminal Justice and Engineering Technology. The Sandia National Laboratories security system design and evaluation process forms the basis for the Security Engineering curricula. In an effort to leverage the special capabilities of each university, distance education will be used to share courses among Institute members and eventually with other sites across the country.

  10. 10th International Conference “Traffic and Granular Flow”

    CERN Document Server

    Boltes, Maik; Schadschneider, Andreas; Seyfried, Armin

    2015-01-01

    This book continues the biannual series of conference proceedings, which has become a classical reference resource in traffic and granular research alike, and addresses the latest developments at the intersection of physics, engineering and computational science. These involve complex systems, in which multiple simple agents, be they vehicles or particles, give rise to surprising and fascinating phenomena. The contributions collected in these proceedings cover several research fields, all of which deal with transport. Topics include highway, pedestrian and internet traffic; granular matter; biological transport; transport networks; data acquisition; data analysis and technological applications. Different perspectives, i.e., modeling, simulations, experiments, and phenomenological observations are considered.    

  11. Application of software engineering to development of reactor safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1981-01-01

    Software Engineering, which is a systematic methodology by which a large scale software development project is partitioned into manageable pieces, has been applied to the development of LMFBR safety codes. The techniques have been applied extensively in the business and aerospace communities and have provided an answer to the drastically increasing cost of developing and maintaining software. The five phases of software engineering (Survey, Analysis, Design, Implementation, and Testing) were applied in turn to development of these codes, along with Walkthroughs (peer review) at each stage. The application of these techniques has resulted in SUPERIOR SOFTWARE which is well documented, thoroughly tested, easy to modify, easier to use and maintain. The development projects have resulted in lower overall cost. (orig.) [de

  12. Development of university-industry partnerships in railroad engineering education

    Science.gov (United States)

    Lautala, Pasi T.

    to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process

  13. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-01-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  14. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-11-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  15. Evaluation of Intersection Traffic Control Measures through Simulation

    Science.gov (United States)

    Asaithambi, Gowri; Sivanandan, R.

    2015-12-01

    Modeling traffic flow is stochastic in nature due to randomness in variables such as vehicle arrivals and speeds. Due to this and due to complex vehicular interactions and their manoeuvres, it is extremely difficult to model the traffic flow through analytical methods. To study this type of complex traffic system and vehicle interactions, simulation is considered as an effective tool. Application of homogeneous traffic models to heterogeneous traffic may not be able to capture the complex manoeuvres and interactions in such flows. Hence, a microscopic simulation model for heterogeneous traffic is developed using object oriented concepts. This simulation model acts as a tool for evaluating various control measures at signalized intersections. The present study focuses on the evaluation of Right Turn Lane (RTL) and Channelised Left Turn Lane (CLTL). A sensitivity analysis was performed to evaluate RTL and CLTL by varying the approach volumes, turn proportions and turn lane lengths. RTL is found to be advantageous only up to certain approach volumes and right-turn proportions, beyond which it is counter-productive. CLTL is found to be advantageous for lower approach volumes for all turn proportions, signifying the benefits of CLTL. It is counter-productive for higher approach volume and lower turn proportions. This study pinpoints the break-even points for various scenarios. The developed simulation model can be used as an appropriate intersection lane control tool for enhancing the efficiency of flow at intersections. This model can also be employed for scenario analysis and can be valuable to field traffic engineers in implementing vehicle-type based and lane-based traffic control measures.

  16. Active Learning and Reflection in Product Development Engineering Education

    Science.gov (United States)

    Shekar, Aruna

    2007-01-01

    Traditional engineering courses at tertiary level have been traditionally theory-based, supported by laboratory work, but there is now a world-wide trend towards project-based learning. In product development education, project-based learning is essential in order to integrate the disciplines of design, marketing and manufacturing towards the…

  17. International Trade as an Engine of Growth in Developing Countries ...

    African Journals Online (AJOL)

    This study examines international trade as an engine of growth in developing countries, a case study of Nigeria. A review of the literature reveals that countries that are more open to international trade tends to experience higher growth rate and per-capital income than countries who do not trade or closed economy.

  18. Engineering development of advanced froth flotation. Volume 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, D.D.; Bencho, J.R.; Torak, E.R. [ICF Kaiser Engineers, Inc., Pittsburgh, PA (United States)

    1995-03-01

    This report is an account of findings related to the Engineering and Development of Advanced Froth Flotation project. The results from benchscale and proof-of-concept (POC) level testing are presented and the important results from this testing are used to refine a conceptual design and cost estimate for a 20 TPH Semi-Works Facility incorporating the final proposed technology.

  19. Examining engineering costs for development of highway projects.

    Science.gov (United States)

    2012-12-01

    The Texas Department of Transportation (TxDOT) commissioned a research team at Texas State University-San Marcos Department of Accounting to analyze the cost of projects by determining the cost of a preliminary engineering hour necessary to develop h...

  20. Development of the Scale for "Convergence Thinking" in Engineering

    Science.gov (United States)

    Park, Sungmi

    2016-01-01

    Purpose: The purpose of this paper is to define the concept of "convergence thinking" as a trading zone for knowledge fusion in the engineering field, and develops its measuring scale. Design/ Methodology/Approach: Based on results from literature review, this study clarifies a theoretical ground for "convergence thinking."…

  1. Integration of Sustainable Development in Sanitary Engineering Education in Sweden

    Science.gov (United States)

    Rydhagen, B.; Dackman, C.

    2011-01-01

    In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering…

  2. Engineering development testing of the GPHS-RTG converter

    International Nuclear Information System (INIS)

    Cockfield, R.D.

    1981-01-01

    The GPHS-RTG will provide electrical power for the Galileo orbiter and for the two spacecraft of the International Solar Polar Mission. The GPHS-RTG consists of two primary assemblies: the General Purpose Heat Source, and the converter. This paper deals only with the converter, and highlights engineering tests that provide support for its design development

  3. Engineering Education for Agricultural and Rural Development in Africa

    Science.gov (United States)

    Adewumi, B. A.

    2008-01-01

    Agricultural Engineering has transformed agricultural practices from subsistence level to medium and large-scale production via mechanisation in the developed nations. This has reduced the labour force requirements in agriculture; increased production levels and efficiency, product shelf life and product quality; and resulted into…

  4. Development of Management Methodology for Engineering Production Quality

    Science.gov (United States)

    Gorlenko, O.; Miroshnikov, V.; Borbatc, N.

    2016-04-01

    The authors of the paper propose four directions of the methodology developing the quality management of engineering products that implement the requirements of new international standard ISO 9001:2015: the analysis of arrangement context taking into account stakeholders, the use of risk management, management of in-house knowledge, assessment of the enterprise activity according to the criteria of effectiveness

  5. Development of Desktop Computing Applications and Engineering Tools on GPUs

    DEFF Research Database (Denmark)

    Sørensen, Hans Henrik Brandenborg; Glimberg, Stefan Lemvig; Hansen, Toke Jansen

    (GPUs) for high-performance computing applications and software tools in science and engineering, inverse problems, visualization, imaging, dynamic optimization. The goals are to contribute to the development of new state-of-the-art mathematical models and algorithms for maximum throughout performance...

  6. Intelligent Traffic Light Based on PLC Control

    Science.gov (United States)

    Mei, Lin; Zhang, Lijian; Wang, Lingling

    2017-11-01

    The traditional traffic light system with a fixed control mode and single control function is contradicted with the current traffic section. The traditional one has been unable to meet the functional requirements of the existing flexible traffic control system. This paper research and develop an intelligent traffic light called PLC control system. It uses PLC as control core, using a sensor module for receiving real-time information of vehicles, traffic control mode for information to select the traffic lights. Of which control mode is flexible and changeable, and it also set the countdown reminder to improve the effectiveness of traffic lights, which can realize the goal of intelligent traffic diversion, intelligent traffic diversion.

  7. Building the Brain's "Air Traffic Control" System: How Early Experiences Shape the Development of Executive Function. Working Paper 11

    Science.gov (United States)

    National Scientific Council on the Developing Child, 2011

    2011-01-01

    Being able to focus, hold, and work with information in mind, filter distractions, and switch gears is like having an air traffic control system at a busy airport to manage the arrivals and departures of dozens of planes on multiple runways. In the brain, this air traffic control mechanism is called executive functioning, a group of skills that…

  8. Interdisciplinary Research for Engineering Skills Development Interdisciplinary Research for Engineering Skills Development

    Directory of Open Access Journals (Sweden)

    Angel E. González-Lizardo

    2012-02-01

    Full Text Available Este trabajo reporta los resultados de una experiencia interdisciplinaria de investigaciónpara estudiantes de ingeniería, en el Laboratorio de Ingeniería de Plasma (PEL por sussiglas en inglés de la Universidad Politécnica de Puerto Rico (UPPR. Los rasgos fuertes de esta experiencia y su relación con los resultados esperados por la Junta de Acreditación para Ingeniería y Tecnología (ABET por sus siglas en inglés son destacados, y una descripción cualitativa de los resultados en términos de la ejecución de los estudiantes durante la experiencia y después de ella. Se presenta un ejemplo de las diferentes actividades realizadas por un equipo de estudiantes subgraduados y su relación con los resultados esperados por ABET. La experiencia de investigación en el PEL provee a los estudiantes con una oportunidad única para practicar la ingeniería antes de su graduación, a través de problemas reales, innovación, colaboración con otras instituciones, y presentación de su trabajo a audiencias de científicos e ingenieros. This work reports the results of an ad hoc interdisciplinary research experience for undergraduate engineering students at the Plasma Engineering Laboratory (PEL of the Polytechnic University of Puerto Rico (PUPR. The strong features of this experience and their relationship with Accreditation Board for Engineering and Technology (ABET outcomes are pointed out, and a qualitative description of the results is discussed, in terms of the performance of the students during the experience and after it. An example of the different activities performed by a team of undergraduate students, and their relationship with the ABET outcomes is presented. The undergraduate research at the PEL provides the students with a unique opportunity to practice engineering before graduation through real life problems, innovation, collaboration with other institutions, and presentation of their work for engineering and scientific audiences.

  9. Traffic simulation for mixed traffic systems | Mbam | Global Journal of ...

    African Journals Online (AJOL)

    Traffic problem is classified into single and mixed, especially in most developing countries, where motorbikes are used as the most popular transportation system. The aim of this paper is to introduce the motorbike symbol into the traffic light control system to separate cars/lorries indicator from that of motorbike. This is likely ...

  10. Development of a Thermoacoustic Stirling Engine Technology Demonstrator

    Science.gov (United States)

    Reissner, Alexander; Gerger, Joachim; Hummel, Stefan; Reißig, Jannis; Pawelke, Roland

    2014-08-01

    Waste heat is a primary source of energy loss in many aerospace and terrestrial applications. FOTEC, an Austrian Research Company located in Wiener Neustadt, is presently developing a micro power converter, promising high efficiencies even for small- scale applications. The converter is based on an innovative thermoacoustic stirling engine concept without any moving parts. Such a maintenance-free engine system would be particularly suitable for advanced space power systems (radioisotope, waste heat) or even within the scope of terrestrial energy harvesting. This paper will summarizes the status of our ongoing efforts on this micro power converter technology.

  11. Development of a Multimedia Toolkit for Engineering Graphics Education

    Directory of Open Access Journals (Sweden)

    Moudar Zgoul

    2009-09-01

    Full Text Available This paper focuses upon the development of a multimedia toolkit to support the teaching of Engineering Graphics Course. The project used different elements for the toolkit; animations, videos and presentations which were then integrated in a dedicated internet website. The purpose of using these elements is to assist the students building and practicing the needed engineering skills at their own pace as a part of an e-Learning solution. Furthermore, this kit allows students to repeat and view the processes and techniques of graphical construction, and visualization as much as needed, allowing them to follow and practice on their own.

  12. Upgrades of Hanford Engineering Development Laboratory hot cell facilities

    International Nuclear Information System (INIS)

    Daubert, R.L.; DesChane, D.J.

    1987-01-01

    The Hanford Engineering Development Laboratory operates the 327 Postirradiation Testing Laboratory (PITL) and the 324 Shielded Materials Facility (SMF). These hot cell facilities provide diverse capabilities for the postirradiation examination and testing of irradiated reactor fuels and materials. The primary function of these facilities is to determine failure mechanisms and effects of irradiation on physical and mechanical properties of reactor components. The purpose of this paper is to review major equipment and facility upgrades that enhance customer satisfaction and broaden the engineering capabilities for more diversified programs. These facility and system upgrades are providing higher quality remote nondestructive and destructive examination services with increased productivity, operator comfort, and customer satisfaction

  13. Energy savings in traffic, technical possibilities. Energiansaeaestoe liikenteessae, tekniset mahdollisuudet

    Energy Technology Data Exchange (ETDEWEB)

    Alppivuori, K; Himanen, V [Valtion Teknillinen Tutkimuskeskus, Espoo (Finland). Tie- ja Liikennelab.

    1991-01-01

    The fuel consumption of passenger cars can be reduced in many ways. Decreasing the drag coefficient cuts down on the consumption with 3-10% calculated on the basis of the total consumption of passenger cars. Decreasing the cubic capacity of the engine with 200 ccm reduces the consumption with 12-24%. Introduction of small city cars (engine capacity of less than 660 ccm) gives a reduction of 8-13%, changing over to diesel engines gives a reduction of 20-3% and to small two-stroke engines a reduction of 30%. Changing over to electric cars in cities and in the short-distance traffic of cities would reduce the consumption of liquid fuel in traffic with passenger cars with 30-40%, but it would require using of the power of six power plants (total 3000 MW) for charging in the night-time. The consumption of liquid fuel of buses varies considerably according to the bus and the driving conditions in question. Developing of the qualities of a car may produce a saving of 5-15% in its energy consumption. Additionally, optimized use of a car can produce a saving of 5-10%. In future, the boundary between delivery vans and lorries may blur when new types of distribution systems will be introduced. The possibilities of saving fuel will be considerably good, up to 30-49% for delivery vans and light lorries, and 20-30% for heavy lorries. The development of traffic is a result of the traffic policy of the public administration and the behaviour of private people. Background factors are various measures of car manufacturers and marketing organizations. The prevailing development will lead to a steady growth of consumption of liquid fuel in the traffic.

  14. Development of GE90 engine with largest thrust. GE90 engine no kaihatsu jokyo

    Energy Technology Data Exchange (ETDEWEB)

    Aono, H [Ishikawajima-Harima Heavy Industries, Co. Ltd., Tokyo (Japan)

    1994-05-01

    The present paper explained the turbofan engine GE90 which is being developed by General Electric Co., USA. That engine is to meet the thrust (takeoff thrust) of 300 to 530kN as required for the new-generation wide-fuselage civil transport plane which is being designed for its planned operation in the 1990's. In April, 1991, the world's strongest thrust of 480kN was achieved with engine elements also confirmed through element test. Thereafter, the engine underwent a flying test on board of Boeing 747 to materialize the planned operation in 1995. Made to be 9 in by-pass ratio and about 40 in overall pressure ratio, the GE90 was given the concept that advantage could be secured in both propulsive efficiency and thermal efficiency. That concept could be materialized by the development of composite fan blade technology and energy-efficient technology which were both demonstrated with an unducted fan. In spite of its pressure ratio of 22, the GE90's high pressure compressor demonstrates its polytropic efficiency which is equal to that of the low pressure ratio compressor. 3 refs., 19 figs., 1 tab.

  15. Development Trends of Cartography and Geographic Information Engineering

    Directory of Open Access Journals (Sweden)

    WANG Jiayao

    2010-04-01

    Full Text Available Aimed at the problems of cartography and geographic information engineering and increasing demands of national and military infomationization construction, the paper proposes six hotspots on the research of cartography and geographic information engineering for the future on the foundation of analyzing the development track of cartology, which are heterogeneous geospatial data assimilation, transferring from emphasizing geography infor-mation gaining to user-oriented geographic information deep processing, web or grid geographic information service. intelligent spatial data generalization. integration of GIS and VGE. cartography and geographic information engineering theory system with multi-mode(Map,.GlS..VGE spatial-temporal integrated cognition as the core. And discusses the necessity ,existing groundwork and research contents on studying these hotspots.

  16. Automotive Stirling engine development program. [fuel economy assessment

    Science.gov (United States)

    Kitzner, E. W.

    1978-01-01

    The Ford/DOE automotive Stirling engine development program is directed towards establishing the technological and developmental base that would enable a decision on whether an engineering program should be directed at Stirling engine production. The fuel economy assessment aims to achieve, with a high degree of confidence, the ERDA proposal estimate of 20.6 MPG (gasoline) for a 4500 lb 1WC Stirling engine passenger car. The current M-H fuel economy projection for the 170 HP Stirling engine is 15.7 MPG. The confidence level for this projection is 32%. A confidence level of 29% is projected for a 22.1 MPG estimate. If all of the planned analyses and test work is accomplished at the end of the one year effort, and the projected improvements are substantiated, the confidence levels would rise to 59% for the 20.6 MPG projection and 54% for the 22.1 MPG projection. Progress achieved thus far during the fuel economy assessment is discussed.

  17. Unique Education and Workforce Development for NASA Engineers

    Science.gov (United States)

    Forsgren, Roger C.; Miller, Lauren L.

    2010-01-01

    NASA engineers are some of the world's best-educated graduates, responsible for technically complex, highly significant scientific programs. Even though these professionals are highly proficient in traditional analytical competencies, there is a unique opportunity to offer continuing education that further enhances their overall scientific minds. With a goal of maintaining the Agency's passionate, "best in class" engineering workforce, the NASA Academy of Program/Project & Engineering Leadership (APPEL) provides educational resources encouraging foundational learning, professional development, and knowledge sharing. NASA APPEL is currently partnering with the scientific community's most respected subject matter experts to expand its engineering curriculum beyond the analytics and specialized subsystems in the areas of: understanding NASA's overall vision and its fundamental basis, and the Agency initiatives supporting them; sharing NASA's vast reservoir of engineering experience, wisdom, and lessons learned; and innovatively designing hardware for manufacturability, assembly, and servicing. It takes collaboration and innovation to educate an organization that possesses such a rich and important historyand a future that is of great global interest. NASA APPEL strives to intellectually nurture the Agency's technical professionals, build its capacity for future performance, and exemplify its core valuesalJ to better enable NASA to meet its strategic visionand beyond.

  18. Biomedical engineering education in developing countries: research synthesis.

    Science.gov (United States)

    Douglas, Tania S

    2011-01-01

    Biomedical engineering (BME) contributes to development through improving human health. This paper examines BME education to address the needs of developing countries. Components of different BME programs described in the literature are synthesized to represent what has been proposed or implemented for the production of graduates able to address health problems in a manner suited to the local environment in which they occur. Published research on BME education is reviewed with reference to problem context, interventions and their mechanisms, and intended outcomes.

  19. TECHNOLOGICAL CONTRIBUTIONS OF THE MILITARY ENGINEERING TO THE NATIONAL DEVELOPMENT

    OpenAIRE

    RODRIGO CARO DE KARTZOW

    2018-01-01

    The development of the Chilean military industry is closely related to the growing of the national industry. Similarly to the way the history of the Army and the country are tightly related, the history of the military engineering is an example of organic growth when compared to its civilian counterpart. Collaboration instead of competition is the distinctive seal that best shows the development of weaponry, explosives, cartography and nuclear power. This collaboration have lasted with the ye...

  20. Traffic Perturbation

    CERN Multimedia

    C. Colloca TS/FM

    2004-01-01

    TS/FM group informs you that, for the progress of the works at the Prévessin site entrance, some perturbation of the traffic may occur during the week between the 14th and 18th of June for a short duration. Access will be assured at any time. For more information, please contact 160239. C. Colloca TS/FM

  1. Development of System Engineering Technology for Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    Kim, Ho Dong; Kim, Sung Ki; Song, Kee Chan

    2010-04-01

    This report is aims to establish design requirements for constructing mock-up system of pyroprocess by 2011 to realize long-term goal of nuclear energy promotion comprehensive plan, which is construction of engineering scale pyroprocess integrated process demonstration facility. The development of efficient process for spent fuel and establishment of system engineering technology to demonstrate the process are required to develop nuclear energy continuously. The detailed contents of research for these are as follows; - Design of Mock-up facility for demonstrate pyroprocess, Construction, Approval, Trial run, Performance test - Development of nuclear material accountancy technology for unit processes of pyroprocess and design of safeguards system - Remote operation of demonstrating pyroprocess / Development of maintenance technology and equipment - Establishment of transportation system and evaluation of pre-safety for interim storage system - Deriving and implementation of a method to improve nuclear transparency for commercialization proliferation resistance nuclear fuel cycle Spent fuel which is the most important pending problem of nuclear power development would be reduced and recycled by developing the system engineering technology of pyroprocess facility by 2010. This technology would contribute to obtain JD for the use of spent fuel between the ROK-US and to amend the ROK-US Atomic Energy Agreement scheduled in 2014

  2. Data Mining and Optimization Tools for Developing Engine Parameters Tools

    Science.gov (United States)

    Dhawan, Atam P.

    1998-01-01

    This project was awarded for understanding the problem and developing a plan for Data Mining tools for use in designing and implementing an Engine Condition Monitoring System. Tricia Erhardt and I studied the problem domain for developing an Engine Condition Monitoring system using the sparse and non-standardized datasets to be available through a consortium at NASA Lewis Research Center. We visited NASA three times to discuss additional issues related to dataset which was not made available to us. We discussed and developed a general framework of data mining and optimization tools to extract useful information from sparse and non-standard datasets. These discussions lead to the training of Tricia Erhardt to develop Genetic Algorithm based search programs which were written in C++ and used to demonstrate the capability of GA algorithm in searching an optimal solution in noisy, datasets. From the study and discussion with NASA LeRC personnel, we then prepared a proposal, which is being submitted to NASA for future work for the development of data mining algorithms for engine conditional monitoring. The proposed set of algorithm uses wavelet processing for creating multi-resolution pyramid of tile data for GA based multi-resolution optimal search.

  3. Diesel engine development in view of reduced emission standards

    International Nuclear Information System (INIS)

    Knecht, Walter

    2008-01-01

    Diesel engine development for use in light-, medium- and heavy-duty road vehicles is mainly driven by more and more stringent emission standards. Apart from air quality related emissions such as nitrogen oxides and particulates, also greenhouse gas (GHG) emissions are likely to become of more and more importance. Furthermore, oil-based fuel availability might become a problem due to limited reserves or due to political influences which leads to significantly increased fuel costs. Based on the above aspects, advanced engine technologies become essential and are discussed. Fuel injection with rate shaping capability and elevated injection pressures, air handling systems to increase the brake mean effective pressures (BMEPs) and specific power with a downsizing approach, while retaining a good dynamic response using possibly two-stage turbocharging. Heterogeneous and near-homogeneous combustion processes where the latter could possibly reduce the requirements on the exhaust gas aftertreatment system. Improvement and further development of engine management and control systems, exhaust gas aftertreatment for a reduction of nitrogen oxides and especially particulates and last but not least, energy recovery from the exhaust gas. Furthermore, alternative fuel usage in road vehicles is becoming important and their application in internal combustion engines is discussed

  4. Wire communication engineering

    International Nuclear Information System (INIS)

    Son, Byeong Tae

    1997-02-01

    This book describes wire telecommunication engineering/ It is divided into eleven chapter, which deal with Introduction with development of telecommunication, voice and sound wave and communication network, Telegraphy with summary of telegraphy, code of telegraphy, communication speed, morse and telex, Telephone on structure, circuit and image telephone, Traffic on telecommunication traffic, transmission of line about theory, cable line and loaded cable, carrier communication with carrier telegraphy and carrier telephone, optical communication with types, structure, specialty, laser and equipment, DATA, Mobile telecommunication on summary, mobile telephone, radio paging and digital mobile telecommunication, ISDN with channel of ISDN, and service of ISDN, and design of telecommunication.

  5. Systemic Approach to Traffic Evaluation of Mostar Airport

    Directory of Open Access Journals (Sweden)

    Eldo Raguž

    2005-11-01

    Full Text Available The attempt of this work is to systematically find solutionsfor Mostar Airport development through technical and technologicalharmonization of traffic processes undertaken in twoseparate organizations - airport and air traffic control and coordinationbetween other traffic branches. The work uses theindicators of traffic flows and tourist trends in the region, andtogether with the mentioned simulations it attempts to evaluatethe traffic potentials in the region by affecting the change in thecurrent negative traffic flows at Mostar Airport.

  6. Emergent traffic jams

    International Nuclear Information System (INIS)

    Nagel, K.; Paczuski, M.

    1995-01-01

    We study a single-lane traffic model that is based on human driving behavior. The outflow from a traffic jam self-organizes to a critical state of maximum throughput. Small perturbations of the outflow far downstream create emergent traffic jams with a power law distribution P(t)∼t -3/2 of lifetimes t. On varying the vehicle density in a closed system, this critical state separates lamellar and jammed regimes and exhibits 1/f noise in the power spectrum. Using random walk arguments, in conjunction with a cascade equation, we develop a phenomenological theory that predicts the critical exponents for this transition and explains the self-organizing behavior. These predictions are consistent with all of our numerical results

  7. Emergent traffic jams

    Science.gov (United States)

    Nagel, Kai; Paczuski, Maya

    1995-04-01

    We study a single-lane traffic model that is based on human driving behavior. The outflow from a traffic jam self-organizes to a critical state of maximum throughput. Small perturbations of the outflow far downstream create emergent traffic jams with a power law distribution P(t)~t-3/2 of lifetimes t. On varying the vehicle density in a closed system, this critical state separates lamellar and jammed regimes and exhibits 1/f noise in the power spectrum. Using random walk arguments, in conjunction with a cascade equation, we develop a phenomenological theory that predicts the critical exponents for this transition and explains the self-organizing behavior. These predictions are consistent with all of our numerical results.

  8. Development and implementation of a custom integrated database with dashboards to assist with hematopathology specimen triage and traffic

    Directory of Open Access Journals (Sweden)

    Elizabeth M Azzato

    2014-01-01

    Full Text Available Background: At some institutions, including ours, bone marrow aspirate specimen triage is complex, with hematopathology triage decisions that need to be communicated to downstream ancillary testing laboratories and many specimen aliquot transfers that are handled outside of the laboratory information system (LIS. We developed a custom integrated database with dashboards to facilitate and streamline this workflow. Methods: We developed user-specific dashboards that allow entry of specimen information by technologists in the hematology laboratory, have custom scripting to present relevant information for the hematopathology service and ancillary laboratories and allow communication of triage decisions from the hematopathology service to other laboratories. These dashboards are web-accessible on the local intranet and accessible from behind the hospital firewall on a computer or tablet. Secure user access and group rights ensure that relevant users can edit or access appropriate records. Results: After database and dashboard design, two-stage beta-testing and user education was performed, with the first focusing on technologist specimen entry and the second on downstream users. Commonly encountered issues and user functionality requests were resolved with database and dashboard redesign. Final implementation occurred within 6 months of initial design; users report improved triage efficiency and reduced need for interlaboratory communications. Conclusions: We successfully developed and implemented a custom database with dashboards that facilitates and streamlines our hematopathology bone marrow aspirate triage. This provides an example of a possible solution to specimen communications and traffic that are outside the purview of a standard LIS.

  9. Intelligent Traffic Quantification System

    Science.gov (United States)

    Mohanty, Anita; Bhanja, Urmila; Mahapatra, Sudipta

    2017-08-01

    Currently, city traffic monitoring and controlling is a big issue in almost all cities worldwide. Vehicular ad-hoc Network (VANET) technique is an efficient tool to minimize this problem. Usually, different types of on board sensors are installed in vehicles to generate messages characterized by different vehicle parameters. In this work, an intelligent system based on fuzzy clustering technique is developed to reduce the number of individual messages by extracting important features from the messages of a vehicle. Therefore, the proposed fuzzy clustering technique reduces the traffic load of the network. The technique also reduces congestion and quantifies congestion.

  10. Development of engineering identity in the engineering curriculum in Dutch higher education : an explorative study from the teaching staff perspective

    NARCIS (Netherlands)

    Dehing, A.J.M.; Baartman, L.K.J.; Jochems, W.M.G.

    2013-01-01

    How do engineering students develop a professional identity during the course of the curriculum? What are the development mechanisms and important conditions? In an exploratory study among teachers the authors tried to find out whether the development of engineering identity can be understood by

  11. Development of System Engineering Technology for Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    Kim, Hodong; Choi, Iljae

    2013-04-01

    The development of efficient process for spent fuel and establishment of system engineering technology to demonstrate the process are required to develop nuclear energy continuously. The demonstration of pyroprocess technology which is proliferation resistance nuclear fuel cycle technology can reduce spent fuel and recycle effectively. Through this, people's trust and support on nuclear power would be obtained. Deriving the optimum nuclear fuel cycle alternative would contribute to establish a policy on back-end nuclear fuel cycle in the future, and developing the nuclear transparency-related technology would contribute to establish amendments of the ROK-U. S. Atomic Energy Agreement scheduled in 2014

  12. Software Engineering Research/Developer Collaborations in 2004 (C104)

    Science.gov (United States)

    Pressburger, Tom; Markosian, Lawrance

    2005-01-01

    In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

  13. Nuclear Plant Analyzer development at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Laats, E.T.

    1986-10-01

    The Nuclear Plant Analyzer (NPA) is a state-of-the-art safety analysis and engineering tool being used to address key nuclear power plant safety issues. Under the sponsorship of the US Nuclear Regulatory Commission (NRC), the NPA has been developed to integrate the NRC's computerized reactor behavior simulation codes such as RELAP5, TRAC-BWR and TRAC-PWR, with well-developed computer color graphics programs and large repositories of reactor design and experimental data. An important feature of the NPA is the capability to allow an analyst to redirect a RELAP5 or TRAC calculation as it progresses through its simulated scenario. The analyst can have the same power plant control capabilities as the operator of an actual plant. The NPA resides on the dual Control Data Corporation Cyber 176 mainframe computers at the Idaho National Engineering Laboratory and Cray-1S computers at the Los Alamos National Laboratory (LANL) and Kirtland Air Force Weapons Laboratory (KAFWL)

  14. An engineering design network for SSC detector development

    International Nuclear Information System (INIS)

    DiGiacomo, N.J.

    1990-01-01

    The detector systems that are being proposed to exploit the capabilities of the SSC are of a scale and scope that will make them among the most complex devices ever built. To successfully design and build these systems over the next decade, the authors must make use of integrated state of the art computer aided engineering and design (CAE/CAD) tools that have been developed and employed in industry. The challenge is to made these tools and associated engineering resources available to the spectrum of institutions - large and small universities, industries and national labs - involved in SSC detector development in such a way that each may contribute and participate in the most effective manner. The authors believe that powerful workstations running sophisticated modeling, analysis and simulation software, linked by high speed data networks and governed by modern configuration management methods offer the ideal means of arriving at the optimum detector configuration for physics at the SSC

  15. Measures to increase traffic law acceptance : some strategic considerations. Paper presented at the 5th European workshop `New developments in traffic safety research', Bern, May 2-3, 1996.

    NARCIS (Netherlands)

    Goldenbeld, C.

    1997-01-01

    The set of traffic laws and rules intends to maximise the possibilities for free movement in the traffic system, while at the same time safeguarding road safety. Acceptance of traffic laws depends in part on properties of the laws and rules themselves that determine how they will be perceived or

  16. The Use of Adaptive Traffic Signal Systems Based on Floating Car Data

    Directory of Open Access Journals (Sweden)

    Vittorio Astarita

    2017-01-01

    Full Text Available This paper presents a simple concept which has not been, up to now, thoroughly explored in scientific research: the use of information coming from the network of Internet connected mobile devices (on vehicles to regulate traffic light systems. Three large-scale changes are going to shape the future of transportation and could lead to the regulation of traffic signal system based on floating car data (FCD: (i the implementation of Internet connected cars with global navigation satellite (GNSS system receivers and the autonomous car revolution; (ii the spreading of mobile cooperative Web 2.0 and the extension to connected vehicles; (iii an increasing need for sustainability of transportation in terms of energy efficiency, traffic safety, and environmental issues. Up to now, the concept of floating car data (FCD has only been extensively used to obtain traffic information and estimate traffic parameters. Traffic lights regulation based on FCD technology has not been fully researched since the implementation requires new ideas and algorithms. This paper intends to provide a seminal insight into the important issue of adaptive traffic light based on FCD by presenting ideas that can be useful to researchers and engineers in the long-term task of developing new algorithms and systems that may revolutionize the way traffic lights are regulated.

  17. Object oriented development of engineering software using CLIPS

    Science.gov (United States)

    Yoon, C. John

    1991-01-01

    Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

  18. Cryogenic Propellant Storage and Transfer Engineering Development Unit Hydrogen Tank

    Science.gov (United States)

    Werkheiser, Arthur

    2015-01-01

    The Cryogenic Propellant Storage and Transfer (CPST) project has been a long-running program in the Space Technology Mission Directorate to enhance the knowledge and technology related to handling cryogenic propellants, specifically liquid hydrogen. This particular effort, the CPST engineering development unit (EDU), was a proof of manufacturability effort in support of a flight article. The EDU was built to find and overcome issues related to manufacturability and collect data to anchor the thermal models for use on the flight design.

  19. Visualization of vessel traffic

    NARCIS (Netherlands)

    Willems, C.M.E.

    2011-01-01

    Moving objects are captured in multivariate trajectories, often large data with multiple attributes. We focus on vessel traffic as a source of such data. Patterns appearing from visually analyzing attributes are used to explain why certain movements have occurred. In this research, we have developed

  20. Probabilistic description of traffic flow

    International Nuclear Information System (INIS)

    Mahnke, R.; Kaupuzs, J.; Lubashevsky, I.

    2005-01-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given

  1. Approaches for Intelligent Traffic System: A Survey

    OpenAIRE

    Pratishtha Gupta; G.N Purohit; Amrita Dadhich

    2012-01-01

    This survey presents various approaches for intelligent traffic systems. The potential research fields in which Intelligent Traffic System emerges as an important application area are highlighted andvarious issues have been identified which need to be handled while developing such a system for an urban area, where an efficient traffic management has become the need of hour.A model is also proposed capable of managing intelligent traffic system using CCTV cameras and WAN. The proposed model wi...

  2. Physics of traffic gridlock in a city

    OpenAIRE

    Kerner, Boris S.

    2011-01-01

    Based of simulations of a stochastic three-phase traffic flow model, we reveal that at a signalized city intersection under small link inflow rates at which a vehicle queue developed during the red phase of light signal dissolves fully during the green phase, i.e., no traffic gridlock should be expected, nevertheless, traffic breakdown with the subsequent city gridlock occurs with some probability after a random time delay. This traffic breakdown is initiated by a first-order phase transition...

  3. Navigators’ Behavior in Traffic Separation Schemes

    Directory of Open Access Journals (Sweden)

    Zbigniew Pietrzykowski

    2015-03-01

    Full Text Available One of the areas of decision support in the navigational ship conduct process is a Traffic Separation Scheme. TSSs are established in areas with high traffic density, often near the shore and in port approaches. The main purpose of these schemes is to improve maritime safety by channeling vessel traffic into streams. Traffic regulations as well as ships behavior in real conditions in chosen TSSs have been analyzed in order to develop decision support algorithms.

  4. Development of a prediction model for crash occurrence by analyzing traffic crash and citation data : final report.

    Science.gov (United States)

    2017-04-30

    It is commonly acknowledged that factors such as human factors, vehicle characteristics, road design and environmental factors highly contribute to the occurrence of traffic crashes (WHO, 2004). Since human factors usually have the most significant i...

  5. Development of a Computational Framework for Big Data-Driven Prediction of Long-Term Bridge Performance and Traffic Flow

    Science.gov (United States)

    2018-04-01

    Consistent efforts with dense sensor deployment and data gathering processes for bridge big data have accumulated profound information regarding bridge performance, associated environments, and traffic flows. However, direct applications of bridge bi...

  6. Developing a Traffic Management Framework for Coastal Expressway Bridges under Adverse Weather Conditions: Case Study of Rain Day in Shenzhen, China

    Directory of Open Access Journals (Sweden)

    Chenming Jiang

    2015-01-01

    Full Text Available Adverse weather can reduce visibility and road surface friction, lower vehicle maneuverability, and increase crash frequency and injury severity. The impacts of adverse weather and its interactions with drivers and roadway on the operation and management of expressway or expressway bridges have drawn the researchers’ and managers’ attention to develop traffic management frameworks to mitigate the negative influence. Considering the peculiar geographical location and meteorological conditions, the Guangshen Coast Expressway-Shenzhen Segment (GSCE-SS was selected as a case in this study to illustrate the proposed traffic management framework on rain days. Conditions categorized by rainfall intensity and traffic flow were the main precondition to make the management decisions. CORSIM simulator was used to develop the alternate routes choice schemes, providing reference for other systems in the proposed traffic management framework. Maps of (a entrance ramp control (ERC strategies; (b mainline control strategies; (c alternate routes choice; (d information release schemes, under scenarios of different volume and rainstorm warning grades (BLUE to RED, were drawn to present a reference or demonstration for managers of long-span expressway bridges not only in China, but even in the world.

  7. Development of catalyst for diesel engine; Diesel engine yo shokubai no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, H; Furutani, T; Nagami, T [Toyota Motor Corp., Aichi (Japan); Aono, N; Goshima, H; Kasahara, K [Cataler Industrial Co. Ltd., Shizuoka (Japan)

    1997-10-01

    The new concept catalyst for diesel engine has been developed. When the exhaust temperature is low, SOF and HC are temporarily adsorbed by the adsorbent within the catalyst and are oxidized as the temperature rise. The process of this development have manifested as follows. (1) The coating material is important factor to govern the oxidation activity. (2) SOF is reduced by the coating material in low temperature less than 200degC. (3) The coating material, which has low SO2 adsorbing rate suppress the sulfate formation at high temperature. 2 refs., 11 figs., 1 tab.

  8. Development and investigation of a pollution control pit for treatment of stormwater from metal roofs and traffic areas.

    Science.gov (United States)

    Dierkes, C; Göbel, P; Lohmann, M; Coldewey, W G

    2006-01-01

    Source control by on-site retention and infiltration of stormwater is a sustainable and proven alternative to classical drainage methods. Unfortunately, sedimentary particles and pollutants from drained surfaces cause clogging and endanger soil and groundwater during long-term operation of infiltration devices. German water authorities recommend the use of infiltration devices, such as swales or swale-trench-systems. Direct infiltration by underground facilities, such as pipes, trenches or sinks, without pretreatment of runoff is generally not permitted. Problems occur with runoff from metal roofs, traffic areas and industrial sites. However, due to site limitations, underground systems are often the only feasible option. To overcome this situation, a pollution control pit was developed with a hydrodynamic separator and a multistage filter made of coated porous concrete. The system treats runoff at source and protects soil, groundwater and receiving waterways. Typically, more than 90% of the pollutants such as sedimentary particles, hydrocarbons and heavy metals can be removed. Filters have been developed to treat even higher polluted stormwater loads from metal roofs and industrial sites. The treatment process is based on sedimentation, filtration, adsorption and chemical precipitation. Sediments are trapped in a special chamber within the pit and can be removed easily. Other pollutants are captured in the concrete filter upstream of the sediment separator chamber. Filters can be easily replaced.

  9. ACCOUNT OF ROAD CONDITIONS WHILE INVESTIGATING TRAFFIC ACCIDENTS

    Directory of Open Access Journals (Sweden)

    D. D. Selioukov

    2010-01-01

    Full Text Available The paper considers problems on better traffic safety at government, authority, engineering and driver activity levels, account of road conditions while investigating traffic accidents. The paper also provides road defects mentioned in forensic transport examinations of traffic accidents.

  10. Basic stages in the development of the theory of Ramjet Engines (RJE)

    Science.gov (United States)

    Merkulov, I. A.

    1977-01-01

    Basic periods in the history of the development of ramjet engine theory are cited. The periods include the first experimental tests as well as the development of basic ideas and theoretical development of the cosmic ramjet engine.

  11. Assessing Transit Oriented Development Strategies with a New Combined Modal Split and Traffic Assignment Model

    Science.gov (United States)

    2017-08-30

    Transit oriented development (TOD) has emerged in recent years as a promising paradigm to promote public transportation, increase active transportation usage, mitigate congestion, and alleviate air pollution. However, there is a lack of analytic stud...

  12. Engineering Competencies in International Development Co-operation - the Case of Capacity Development in Environment (CDE)

    DEFF Research Database (Denmark)

    Wangel, Arne

    2001-01-01

    The focus of the paper is the need for engineers to develop new competencies, when they are involved in international development cooperation. Drawing on the case of the Post-RIO strategy of capacity development in environment in developing countries, the paper reviews a recent response...... of such courses, which give emphasis to local views on institutional development and policy change. engineers from industrialised countries have a long tradition of working in the third world: building infrastructure to facilitate exports of raw materials during colonial times; implementing development aid...... on the transfer of managerial models across cultures, on how to develop inter-cultural competence in management, and on the significance of differences in engineering and industrial culture. Second, the concepts of dynamic assimilation and local learning processes and their implications for the practicing...

  13. Photonics approach to traffic signs

    Science.gov (United States)

    Litwin, Dariusz; Galas, Jacek; CzyŻewski, Adam; Rymsza, Barbara; Kornalewski, Leszek; Kryszczyński, Tadeusz; Mikucki, Jerzy; Wikliński, Piotr; Daszkiewicz, Marek; Malasek, Jacek

    2016-12-01

    The automotive industry has been always a driving force for all economies. Despite of its beneficial meaning to every society it brings also many issues including wide area of road safety. The latter has been enforced by the increasing number of cars and the dynamic development of the traffic as a whole. Road signs and traffic lights are crucial in context of good traffic arrangement and its fluency. Traffic designers are used to treat horizontal road signs independently of vertical signs. However, modern light sources and growing flexibility in shaping optical systems create opportunity to design more advanced and smart solutions. In this paper we present an innovative, multidisciplinary approach that consists in tight interdependence of different traffic signals. We describe new optical systems together with their influence on the perception of the road user. The analysis includes maintenance and visibility in different weather conditions. A special attention has been focused on intersections of complex geometry.

  14. Model for traffic emissions estimation

    Science.gov (United States)

    Alexopoulos, A.; Assimacopoulos, D.; Mitsoulis, E.

    A model is developed for the spatial and temporal evaluation of traffic emissions in metropolitan areas based on sparse measurements. All traffic data available are fully employed and the pollutant emissions are determined with the highest precision possible. The main roads are regarded as line sources of constant traffic parameters in the time interval considered. The method is flexible and allows for the estimation of distributed small traffic sources (non-line/area sources). The emissions from the latter are assumed to be proportional to the local population density as well as to the traffic density leading to local main arteries. The contribution of moving vehicles to air pollution in the Greater Athens Area for the period 1986-1988 is analyzed using the proposed model. Emissions and other related parameters are evaluated. Emissions from area sources were found to have a noticeable share of the overall air pollution.

  15. Biomedical engineering tasks. [electrode development for electrocardiography and electroencephalography

    Science.gov (United States)

    1972-01-01

    Electrocardiographic and vectorcardiographic bioinstrumentation work centered on the development of a new electrode system harness for Project Skylab. Evaluation of several silver electrode configurations proved superior impedance voltage performance for silver/silver chloride electrodes mounted flush by using a paste adhesive. A portable ECG processor has been designed and a breadboard unit has been built to sample ECG input data at a rate of 500 samples per second for arrhythmia detection. A small real time display driver program has been developed for statistical analysis on selected QPS features. Engineering work on a sleep monitoring cap assembly continued.

  16. Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

    Science.gov (United States)

    Min, James B.

    2005-01-01

    The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

  17. History of the Development of NERVA Nuclear Rocket Engine Technology

    International Nuclear Information System (INIS)

    David L., Black

    2000-01-01

    During the 17 yr between 1955 and 1972, the Atomic Energy Commission (AEC), the U.S. Air Force (USAF), and the National Aeronautics and Space Administration (NASA) collaborated on an effort to develop a nuclear rocket engine. Based on studies conducted in 1946, the concept selected was a fully enriched uranium-filled, graphite-moderated, beryllium-reflected reactor, cooled by a monopropellant, hydrogen. The program, known as Rover, was centered at Los Alamos Scientific Laboratory (LASL), funded jointly by the AEC and the USAF, with the intent of designing a rocket engine for long-range ballistic missiles. Other nuclear rocket concepts were studied during these years, such as cermet and gas cores, but are not reviewed herein. Even thought the program went through the termination phase in a very short time, the technology may still be fully recoverable/retrievable to the state of its prior technological readiness in a reasonably short time. Documents; drawings; and technical, purchasing, manufacturing, and materials specifications were all stored for ease of retrieval. If the U.S. space program were to discover a need/mission for this engine, its 1972 'pencils down' status could be updated for the technology developments of the past 28 yr for flight demonstration in 8 or fewer years. Depending on today's performance requirements, temperatures and pressures could be increased and weight decreased considerably

  18. Aero-methods and engineering research and development

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, R K

    1979-01-01

    There is presently a sharp, ongoing increase in the volume of work being conducted throughout the country associated with the development of natural gas fields as well as the resulting accelerated development of major gas trunklines. Aero-methods have presently found wide application in the engineering and planning of equipment for such projects. Success has been obtained by the increased quantity and quality of the available engineering information: The ''Giprospetsgaz'' Institute is using aerial photography as the basis for selecting pipeline routes and to more accurately determine the equipment requirements along proposed trunklines such as for compressors, gas transfer stations, electrical power substations, worker settlements, water and transport infrastructure and communications. These requirements are the most important factors in reducing capital operating expenditures. The greatest savings, in economic terms, can be achieved by avoiding sparsely settled or uninhabited areas as much as possible. Similiarly, aerial photography coupled with computer application aids in the solution of engineering problems. Third-generation computers are recommended for this process.

  19. Predicting the development of traffic fatalities in Latin-American and Carribean countries. Paper presented at the OECD conference on road safety in Latin-American and Carribean countries, Sao Paulo, Brazil, December 1995.

    NARCIS (Netherlands)

    Koornstra, M.J.

    1997-01-01

    Long-term developments in traffic growth and fatality rate can be rather well described by non-linear functions of time. The basics are an S-shaped function for saturating traffic growth (measured by annual motor vehicle kilometres or motorised vehicle volumes) and an exponentially decreasing

  20. Scenarios for global emissions from air traffic. The development of regional and gridded (5 degrees x 5 degrees) emissions scenarios for aircraft and for surface sources, based on CPB scenarios and existing emission inventories for aircraft and surface sources

    NARCIS (Netherlands)

    Olivier JGJ; LAE

    1995-01-01

    An estimate was made of present global emissions from air traffic using statistical information on fuel consumption, aircraft types and applying emission factors for various compounds. To generate scenarios for future emissions from air traffic, assumptions were used regarding the development of the

  1. Development of a Systems Engineering Competency Model Tool for the Aviation and Missile Research, Development, And Engineering Center (AMRDEC)

    Science.gov (United States)

    2017-06-01

    grade level (GS-7 to GS-15). This foundational model is structured to support the individual needs of any Department of Defense organization and is... organizational level with traceability to the approved OPM competencies. The Redstone SECCM Tool will allow documentation of system engineering competencies and...assessment of individual and organizational development and training needs. This report documents the requirements analysis, system design, and system

  2. Effects of Engineering Design-Based Science on Elementary School Science Students' Engineering Identity Development across Gender and Grade

    Science.gov (United States)

    Capobianco, Brenda M.; Yu, Ji H.; French, Brian F.

    2015-04-01

    The integration of engineering concepts and practices into elementary science education has become an emerging concern for science educators and practitioners, alike. Moreover, how children, specifically preadolescents (grades 1-5), engage in engineering design-based learning activities may help science educators and researchers learn more about children's earliest identification with engineering. The purpose of this study was to examine the extent to which engineering identity differed among preadolescents across gender and grade, when exposing students to engineering design-based science learning activities. Five hundred fifty preadolescent participants completed the Engineering Identity Development Scale (EIDS), a recently developed measure with validity evidence that characterizes children's conceptions of engineering and potential career aspirations. Data analyses of variance among four factors (i.e., gender, grade, and group) indicated that elementary school students who engaged in the engineering design-based science learning activities demonstrated greater improvements on the EIDS subscales compared to those in the comparison group. Specifically, students in the lower grade levels showed substantial increases, while students in the higher grade levels showed decreases. Girls, regardless of grade level and participation in the engineering learning activities, showed higher scores in the academic subscale compared to boys. These findings suggest that the integration of engineering practices in the science classroom as early as grade one shows potential in fostering and sustaining student interest, participation, and self-concept in engineering and science.

  3. A Bayes Theory-Based Modeling Algorithm to End-to-end Network Traffic

    OpenAIRE

    Zhao Hong-hao; Meng Fan-bo; Zhao Si-wen; Zhao Si-hang; Lu Yi

    2016-01-01

    Recently, network traffic has exponentially increasing due to all kind of applications, such as mobile Internet, smart cities, smart transportations, Internet of things, and so on. the end-to-end network traffic becomes more important for traffic engineering. Usually end-to-end traffic estimation is highly difficult. This paper proposes a Bayes theory-based method to model the end-to-end network traffic. Firstly, the end-to-end network traffic is described as a independent identically distrib...

  4. Development of computer aided engineering system for TRAC applications

    International Nuclear Information System (INIS)

    Arai, Kenji; Itoya, Seihiro; Uematsu, Hitoshi; Tsunoyama, Shigeaki

    1990-01-01

    An advanced best estimate computer program for nuclear reactor transient analysis, TRAC has been extensively used to carry out various thermal hydraulic calculations in the nuclear engineering field, because of its versatility. To perform efficiently a wide variety of TRAC calculation, the efficient utilization of computers and the convenient environment for input and output processing is necessary. We have applied a computer network comprising a super-computer, engineering work stations and personal computers to TRAC calculations and have assigned the appropriate functions to each computer. We have also been developing an interactive graphics system for input and output processing on an EWS. This hardware and software environment can improve the effectiveness of TRAC utilization for various thermal hydraulic calculations. (author)

  5. DEVELOPMENT AND TESTING OF A PRE-PROTOTYPE RAMGEN ENGINE

    Energy Technology Data Exchange (ETDEWEB)

    Aaron Koopman

    2003-07-01

    The research and development effort of a new kind of compressor and engine is presented. The superior performance of these two products arises from the superior performance of rotating supersonic shock-wave compression. Several tasks were performed in compliance with the DOE award objectives. A High Risk Technology review was conducted and evaluated by a team of 20 senior engineers and scientists representing various branches of the federal government. The conceptual design of a compression test rig, test rotors, and test cell adaptor was completed. The work conducted lays the foundation for the completed design and testing of the compression test rig, and the design of a supersonic shock-wave compressor matched to a conventional combustor and turbine.

  6. Turbofan Engine Core Compartment Vent Aerodynamic Configuration Development Methodology

    Science.gov (United States)

    Hebert, Leonard J.

    2006-01-01

    This paper presents an overview of the design methodology used in the development of the aerodynamic configuration of the nacelle core compartment vent for a typical Boeing commercial airplane together with design challenges for future design efforts. Core compartment vents exhaust engine subsystem flows from the space contained between the engine case and the nacelle of an airplane propulsion system. These subsystem flows typically consist of precooler, oil cooler, turbine case cooling, compartment cooling and nacelle leakage air. The design of core compartment vents is challenging due to stringent design requirements, mass flow sensitivity of the system to small changes in vent exit pressure ratio, and the need to maximize overall exhaust system performance at cruise conditions.

  7. Plant synthetic biology for molecular engineering of signalling and development.

    Science.gov (United States)

    Nemhauser, Jennifer L; Torii, Keiko U

    2016-03-02

    Molecular genetic studies of model plants in the past few decades have identified many key genes and pathways controlling development, metabolism and environmental responses. Recent technological and informatics advances have led to unprecedented volumes of data that may uncover underlying principles of plants as biological systems. The newly emerged discipline of synthetic biology and related molecular engineering approaches is built on this strong foundation. Today, plant regulatory pathways can be reconstituted in heterologous organisms to identify and manipulate parameters influencing signalling outputs. Moreover, regulatory circuits that include receptors, ligands, signal transduction components, epigenetic machinery and molecular motors can be engineered and introduced into plants to create novel traits in a predictive manner. Here, we provide a brief history of plant synthetic biology and significant recent examples of this approach, focusing on how knowledge generated by the reference plant Arabidopsis thaliana has contributed to the rapid rise of this new discipline, and discuss potential future directions.

  8. Human Factors Engineering: Current Practices and Development Needs in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Savioja, Paula; Norros, Leena; Liinasuo, Marja; Laarni, Jari [VTT Technical Research Centre of Finland, Finland (Finland)

    2011-08-15

    This paper describes initial findings from a study concerning the practices and development needs of Human Factors Engineering (HFE) in Finland. HFE is increasing in importance as the Radiation and Nuclear Safety Authority Finland (STUK) is renewing the regulatory guidelines and the intention is to include requirements concerning HFE. The motivation for the paper is to discover how HFE is conducted currently in order to envision what should be aimed at when modifying requirements for design practices. In an interview with STUK it was discovered that current HFE practices encompass mainly activities related to control room modifications and as such namely verification and validation of new designs. The adoption of the entire HFE process in design and modification projects requires changes that include better integration of technical and Human Factors Engineering approaches. Boundary objects that mediate between different design disciplines are needed in order to enforce the stronger integration. Concept of operations (CONOPS) is suggested as a such boundary object.

  9. Development of Fast-Time Stochastic Airport Ground and Runway Simulation Model and Its Traffic Analysis

    Directory of Open Access Journals (Sweden)

    Ryota Mori

    2015-01-01

    Full Text Available Airport congestion, in particular congestion of departure aircraft, has already been discussed by other researches. Most solutions, though, fail to account for uncertainties. Since it is difficult to remove uncertainties of the operations in the real world, a strategy should be developed assuming such uncertainties exist. Therefore, this research develops a fast-time stochastic simulation model used to validate various methods in order to decrease airport congestion level under existing uncertainties. The surface movement data is analyzed first, and the uncertainty level is obtained. Next, based on the result of data analysis, the stochastic simulation model is developed. The model is validated statistically and the characteristics of airport operation under existing uncertainties are investigated.

  10. Developing engineering capabilities as a support to a nuclear program

    International Nuclear Information System (INIS)

    Rodriguez, A.G.

    1986-04-01

    The performance of a nuclear program needs a quite substantial and diversified volume of technological resources. Its integrated management is one of the basic aspects to be settled. In this regard, the creation of strong engineering organizations with the ability to develop management of the project technical activities as a whole has had success in various countries. These organizations should be provided with suitable means to rapidly assimilate the technology and should serve as a channel and support to local industry in general. The development of a nuclear program also requires the collaboration of other institutions, such as universities and research and development centers. In this sense, engineer and technician training necessities are important both in number and technological qualification, as is the availability of capacities in such different areas as simulation and advanced calculation, geology and soil mechanics, materials, fabrication processes, test laboratories, etc. The volume of technological activities to be developed in relation to a stable, although not necessarily large, nuclear program justifies in itself the assigning of important resources to all the above mentioned activities. However, it should be noted that it has been proved that the nuclear industry is completely pervious as regards other fields of activity. In fact, the more stringent quality requirements are quickly transmitted to other industrial processes, and the engineers trained in this area undergo a far from contemptible turnover towards non-nuclear activities. The basic research area in the nuclear field is not in itself a requirement that has to be in parallel with the development of a nuclear program. However, on medium and long-term bases, it may be interesting for a well balanced commercial program that research activities be established realistically and sensibly, even though short-term practical applications are not necessarily derived from this

  11. Software Development for EECU Platform of Turbofan Engine

    Science.gov (United States)

    Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

    2017-04-01

    The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

  12. Development, Validation, and Deployment of an Occupational Test of Color Vision for Air Traffic Control Specialists

    Science.gov (United States)

    2011-05-01

    direct sampling of form and content of critical display data. Evidence of construct validity is provided by correlation with Colour Assessment and...testing resulted in development of tests such as the Colour Assessment and Diagnosis Test (CAD; Rodriguez -Carmona, Harlow, Walker, & Barbur, 2005...Great Lakes Regional PEPC who failed initial screening on the Dvorine PIP test. Volunteers were recruited through advertisements in local

  13. Development of Advanced Carbon Face Seals for Aircraft Engines

    Science.gov (United States)

    Falaleev, S. V.; Bondarchuk, P. V.; Tisarev, A. Yu

    2018-01-01

    Modern aircraft gas turbine engines require the development of seals which can operate for a long time with low leakages. The basic type of seals applied for gas turbine engine rotor supports is face seal. To meet the modern requirements of reliability, leak-tightness and weight, low-leakage gas-static and hydrodynamic seals have to be developed. Dry gas seals use both gas-static and hydrodynamic principles. In dry gas seals microgrooves are often used, which ensure the reverse injection of leakages in the sealed cavity. Authors have developed a calculation technique including the concept of coupled hydrodynamic, thermal and structural calculations. This technique allows to calculate the seal performance taking into account the forces of inertia, rupture of the lubricant layer and the real form of the gap. Authors have compared the efficiency of seals with different forms of microgrooves. Results of calculations show that seal with rectangular form of microgrooves has a little gap leading to both the contact of seal surfaces and the wear. Reversible microgrooves have a higher oil mass flow rate, whereas HST micro-grooves have good performance, but they are difficult to produce. Spiral microgrooves have both an acceptable leakages and a high stiffness of liquid layer that is important in terms of ensuring of sealing performance at vibration conditions. Therefore, the spiral grooves were chosen for the developed seal. Based on calculation results, geometric dimensions were chosen to ensure the reliability of the seal operation by creating a guaranteed liquid film, which eliminates the wear of the sealing surfaces. Seals designed were tested both at the test rig and in the engine.

  14. Laser ignition - Spark plug development and application in reciprocating engines

    Science.gov (United States)

    Pavel, Nicolaie; Bärwinkel, Mark; Heinz, Peter; Brüggemann, Dieter; Dearden, Geoff; Croitoru, Gabriela; Grigore, Oana Valeria

    2018-03-01

    Combustion is one of the most dominant energy conversion processes used in all areas of human life, but global concerns over exhaust gas pollution and greenhouse gas emission have stimulated further development of the process. Lean combustion and exhaust gas recirculation are approaches to improve the efficiency and to reduce pollutant emissions; however, such measures impede reliable ignition when applied to conventional ignition systems. Therefore, alternative ignition systems are a focus of scientific research. Amongst others, laser induced ignition seems an attractive method to improve the combustion process. In comparison with conventional ignition by electric spark plugs, laser ignition offers a number of potential benefits. Those most often discussed are: no quenching of the combustion flame kernel; the ability to deliver (laser) energy to any location of interest in the combustion chamber; the possibility of delivering the beam simultaneously to different positions, and the temporal control of ignition. If these advantages can be exploited in practice, the engine efficiency may be improved and reliable operation at lean air-fuel mixtures can be achieved, making feasible savings in fuel consumption and reduction in emission of exhaust gasses. Therefore, laser ignition can enable important new approaches to address global concerns about the environmental impact of continued use of reciprocating engines in vehicles and power plants, with the aim of diminishing pollutant levels in the atmosphere. The technology can also support increased use of electrification in powered transport, through its application to ignition of hybrid (electric-gas) engines, and the efficient combustion of advanced fuels. In this work, we review the progress made over the last years in laser ignition research, in particular that aimed towards realizing laser sources (or laser spark plugs) with dimensions and properties suitable for operating directly on an engine. The main envisaged

  15. F3 turbofan engine. Overview of research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kozu, Masao

    1986-12-10

    The development of XF3-30 Turbofan Engine (static propulsion 1670 kgf), to be equipped in the next exercise plane (XT-4) of the Air Self-Defense Force, was launched in FY 1975 and completed in FY 1985 in terms of certificate testing. This engine is the second national product after the first J3 in Japan. During the development work, technical gaps are avoided as far as possible while also noting cost control in mass production. Important items, felt during the development work for smoothly proceeding with the plan and early achieving the target, include optimum decision of low-fuel consumption rate, complete testing, careful study on the interface, long-term test run for detecting problems, frank attitude to accept facts, incentive of persons in charge and cooperation of related people. This report describes an outline of the plan from research to development, except for technical details that will be reported separately. (20 refs, 4 figs, 6 tabs, 5 photos)

  16. Development of Nuclear ship Engineering Simulation SYstem (NESSY)

    International Nuclear Information System (INIS)

    Kusunoki, Tsuyoshi; Kyouya, Masahiko; Takahashi, Teruo; Kobayashi, Hideo; Ochiai, Masa-aki; Hashidate, Kouji.

    1993-11-01

    NESSY has been developed for design studies of advanced marine reactors as a part of nuclear ship research and development since 1987. Engineering simulation model of the Mutsu, which is the first nuclear ship in Japan, was completed in March of 1993. In this report we concentration on detail description of softwares for Mutsu modeling. The aims of development of NESSY are as follows; (1) Assessment and confirmation on plant performance of an advanced marine reactor in each step of nuclear ship design (2) Development of abnormality diagnosis system and operator support system as a part of enhanced automization study, and study of human interface with hardware The characteristics of NESSY are the followings. (1) Total engineering simulation system simulate simultaneously ship motions, propulsion system behavior, and nuclear plant behavior under given weather and sea conditions. (2) Models based on physical theory as far as possible. (3) The simulator has high extensibility and flexibility. It is able to apply to other reactors, as the simulation model consists of the part of basic model and the part of plant data which are easy to change. After completion of Mutsu modeling, we are planning to utilize this system as one of design tools for an advanced marine reactor. (author)

  17. Developing English Communication Expertise for Engineers in the Global Age

    Science.gov (United States)

    Ono, Yoshimasa A.; Morimura, Kumiko

    This paper discusses contents and results of a new graduate course “English for Engineers and Scientists” given at School of Engineering, The University of Tokyo. This course is a new attempt to develop English communication expertise for engineering graduate students: how to write technical papers and how to make technical presentations in English. For these purposes, differences in the writing styles and in the sentence structures of English and Japanese are stressed: conclusions come first in English versus conclusions come last in Japanese; the three-step style of introduction, body, and conclusion in English versus the four-step style of ki-sho-ten-ketsu in Japanese. In addition, proper styles of technical papers (rhetoric) and related grammatical points are discussed. Technical presentation course consists of four-week lecture and seven-week practice session. In the lecture, essential points of technical presentations in English are discussed in detail, and in the practice session students‧ presentation skills are improved through guidance and instructions given by native-speaker moderators. The class evaluation results show that most students have obtained necessary skills of technical presentation, indicating that the combined course of lecture and practice session is essential for training students to make better technical presentations in English.

  18. Developing an Integration Infrastructure for Distributed Engine Control Technologies

    Science.gov (United States)

    Culley, Dennis; Zinnecker, Alicia; Aretskin-Hariton, Eliot; Kratz, Jonathan

    2014-01-01

    Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.

  19. Development of engineering diffractometer at J-PARC

    Energy Technology Data Exchange (ETDEWEB)

    Moriai, Atsushi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan)]. E-mail: atsushi.moriai@jaea.go.jp; Torii, Shuki [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Suzuki, Hiroshi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Harjo, Stefanus [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Morii, Yukio [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Arai, Masatoshi [Quantum Beam Science Directorate, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Tomota, Yo [Ibaraki University, Hitachi-shi, Ibaraki, 316-8511 (Japan); Suzuki, Tetsuya [Ibaraki University, Hitachi-shi, Ibaraki, 316-8511 (Japan); Akiniwa, Yoshiaki [Nagoya University, Nagoya-shi, Aichi, 464-8603 (Japan); Kimura, Hidehiko [Nagoya University, Nagoya-shi, Aichi, 464-8603 (Japan); Akita, Koich [Musashi Institute of Technology, Setagaya-ku, Tokyo, 158-8557 (Japan)

    2006-11-15

    An engineering diffractometer for investigations of stresses and crystallographic structures within engineering components is now being developed at J-PARC project. The diffractometer is designed to view a decoupled-poisoned liquid H{sub 2} moderator providing neutrons with good symmetrical diffraction profiles in the acceptable wavelength range. The diffractometer will have a primary flight path of 40 m and a secondary flight path of 2.0 m for 90{sup o} scattering detector banks, and will include a curved supermirror neutron guide to avoid intensity loss due to the long flight path and to reduce backgrounds from fast neutrons and gamma rays. Therefore, stresses with sufficient accuracies in many engineering studies are quite promising. The diffractometer involves a sample translator which is able to handle large and heavy real industrial-scaled components. Detailed design works are being continuously promoted. The optimization of the diffractometer has been performed with a Monte Carlo simulation, and an appropriate resolution of less than 0.2% in {delta}d/d has been confirmed.

  20. Development of engineering diffractometer at J-PARC

    International Nuclear Information System (INIS)

    Moriai, Atsushi; Torii, Shuki; Suzuki, Hiroshi; Harjo, Stefanus; Morii, Yukio; Arai, Masatoshi; Tomota, Yo; Suzuki, Tetsuya; Akiniwa, Yoshiaki; Kimura, Hidehiko; Akita, Koich

    2006-01-01

    An engineering diffractometer for investigations of stresses and crystallographic structures within engineering components is now being developed at J-PARC project. The diffractometer is designed to view a decoupled-poisoned liquid H 2 moderator providing neutrons with good symmetrical diffraction profiles in the acceptable wavelength range. The diffractometer will have a primary flight path of 40 m and a secondary flight path of 2.0 m for 90 o scattering detector banks, and will include a curved supermirror neutron guide to avoid intensity loss due to the long flight path and to reduce backgrounds from fast neutrons and gamma rays. Therefore, stresses with sufficient accuracies in many engineering studies are quite promising. The diffractometer involves a sample translator which is able to handle large and heavy real industrial-scaled components. Detailed design works are being continuously promoted. The optimization of the diffractometer has been performed with a Monte Carlo simulation, and an appropriate resolution of less than 0.2% in Δd/d has been confirmed

  1. Traffic fatalities and economic growth

    Science.gov (United States)

    2003-04-01

    As countries develop death rates usually fall, especially for diseases that affect the young and result in substantial life-years lost. Deaths due to traffic accidents are a notable exception: the growth in motor vehicles that accompanies economic gr...

  2. Developing a Model for Forecasting Road Traffic Accident (RTA Fatalities in Yemen

    Directory of Open Access Journals (Sweden)

    Karim Fareed M. A.

    2017-12-01

    Full Text Available The aim of this paper is to develop a model for forecasting RTA fatalities in Yemen. The yearly fatalities was modeled as the dependent variable, while the number of independent variables included the population, number of vehicles, GNP, GDP and Real GDP per capita. It was determined that all these variables are highly correlated with the correlation coefficient (r ≈ 0.9; in order to avoid multicollinearity in the model, a single variable with the highest r value was selected (real GDP per capita. A simple regression model was developed; the model was very good (R2=0.916; however, the residuals were serially correlated. The Prais-Winsten procedure was used to overcome this violation of the regression assumption. The data for a 20-year period from 1991-2010 were analyzed to build the model; the model was validated by using data for the years 2011-2013; the historical fit for the period 1991 - 2011 was very good. Also, the validation for 2011-2013 proved accurate.

  3. Developing a Model for Forecasting Road Traffic Accident (RTA) Fatalities in Yemen

    Science.gov (United States)

    Karim, Fareed M. A.; Abdo Saleh, Ali; Taijoobux, Aref; Ševrović, Marko

    2017-12-01

    The aim of this paper is to develop a model for forecasting RTA fatalities in Yemen. The yearly fatalities was modeled as the dependent variable, while the number of independent variables included the population, number of vehicles, GNP, GDP and Real GDP per capita. It was determined that all these variables are highly correlated with the correlation coefficient (r ≈ 0.9); in order to avoid multicollinearity in the model, a single variable with the highest r value was selected (real GDP per capita). A simple regression model was developed; the model was very good (R2=0.916); however, the residuals were serially correlated. The Prais-Winsten procedure was used to overcome this violation of the regression assumption. The data for a 20-year period from 1991-2010 were analyzed to build the model; the model was validated by using data for the years 2011-2013; the historical fit for the period 1991 - 2011 was very good. Also, the validation for 2011-2013 proved accurate.

  4. Center Planning and Development Student Engineer at KSC

    Science.gov (United States)

    Jenkins, Kenneth T., Jr.

    2015-01-01

    This summer I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning & Development (CPD) Directorate. CPD works with commercial companies who are interested in using KSC's unique capabilities for spaceflight, spacecraft processing, ground systems and Research & Development (R&D) projects that fall in line with NASA's Mission and Vision. CPD is divided into three (3) groups: (1) AD-A, which works on the Master Planning for the center, (2) AD-B (where I am), which works on project control, management and integration, and (3) AD-C, which works on partnership development. CPD's main goal is to make KSC the world's preeminent multi-user spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group of employees having a wide knowledge of not only the Space Shuttle, but also Expendable Launch Vehicles (ELV). The director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree from ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering documents, weekly notes for CPD and senior management, engineering familiarizations with facilities at KSC, leading a tour for the Embry-Riddle Aeronautical University Career Services office, and working on actual agreements/proposals that will be used in the partnership process with multiple partners, along with other projects. Most of the work I have done is sensitive information and cannot be disclosed.

  5. Development Testing of 1-Newton ADN-Based Rocket Engines

    Science.gov (United States)

    Anflo, K.; Gronland, T.-A.; Bergman, G.; Nedar, R.; Thormählen, P.

    2004-10-01

    With the objective to reduce operational hazards and improve specific and density impulse as compared with hydrazine, the Research and Development (R&D) of a new monopropellant for space applications based on AmmoniumDiNitramide (ADN), was first proposed in 1997. This pioneering work has been described in previous papers1,2,3,4 . From the discussion above, it is clear that cost savings as well as risk reduction are the main drivers to develop a new generation of reduced hazard propellants. However, this alone is not enough to convince a spacecraft builder to choose a new technology. Cost, risk and schedule reduction are good incentives, but a spacecraft supplier will ask for evidence that this new propulsion system meets a number of requirements within the following areas: This paper describes the ongoing effort to develop a storable liquid monopropellant blend, based on AND, and its specific rocket engines. After building and testing more than 20 experimental rocket engines, the first Engineering Model (EM-1) has now accumulated more than 1 hour of firing-time. The results from test firings have validated the design. Specific impulse, combustion stability, blow-down capability and short pulse capability are amongst the requirements that have been demonstrated. The LMP-103x propellant candidate has been stored for more than 1 year and initial material compatibility screening and testing has started. 1. Performance &life 2. Impact on spacecraft design &operation 3. Flight heritage Hereafter, the essential requirements for some of these areas are outlined. These issues are discussed in detail in a previous paper1 . The use of "Commercial Of The Shelf" (COTS) propulsion system components as much as possible is essential to minimize the overall cost, risk and schedule. This leads to the conclusion that the Technology Readiness Level (TRL) 5 has been reached for the thruster and propellant. Furthermore, that the concept of ADN-based propulsion is feasible.

  6. Decline traffic information system

    Energy Technology Data Exchange (ETDEWEB)

    Du Plessis, K [Computer Sciences Corporation (CSC), Sydney (Australia)

    2007-09-06

    BHP Billion (BHPB) Cannington has experienced problems in regards to their traffic flow in the decline at the mine. The problems related to reports on near misses of vehicles moving towards each other in the decline. The decline is also to narrow for trucks to pass each other and the operators need to be aware of oncoming traffic in the decline to ensure they could take early evasive steps to ensure the rules of right of way in the decline are adhered to. BHPB Cannington requested CSC to conduct a problem analysis and to provide a solutions proposal to Cannington. The solution was put forward as an augmentation of their current safety procedures used with in the decline. During this phase of the project CSC developed a solutions architecture which involved the use of Active (Radio Frequency Identification) RFID tagging which will enable vehicle movement tracking on a real time basis after which the appropriate traffic movement can be relayed to the operators in the decline. The primary objective of the DTIS is to provide accurate information of traffic movement in the decline and present that information to the operators of the decline IN THE DECLINE upon which they would make their decisions. (orig.)

  7. Genetically engineered plants in the product development pipeline in India.

    Science.gov (United States)

    Warrier, Ranjini; Pande, Hem

    2016-01-02

    In order to proactively identify emerging issues that may impact the risk assessment and risk management functions of the Indian biosafety regulatory system, the Ministry of Environment, Forests and Climate Change sought to understand the nature and diversity of genetically engineered crops that may move to product commercialization within the next 10 y. This paper describes the findings from a questionnaire designed to solicit information about public and private sector research and development (R&D) activities in plant biotechnology. It is the first comprehensive overview of the R&D pipeline for GE crops in India.

  8. Engineering Education Development to Enhance Human Skill in DENSO

    Science.gov (United States)

    Isogai, Emiko; Nuka, Takeji

    Importance of human skills such as communication or instruction capability to their staff members has recently been highlighted in a workplace, due to decreasing opportunity of face-to-face communication between supervisors and their staff, or Instruction capability through OJT (On the Job Training) . Currently, communication skills are being reinforced mainly through OJT at DENSO. Therefore, as part of supplemental support tools, DENSO has established comprehensive engineers training program on off-JT basis for developing human skills, covering from newly employeed enginners up to managerial class since 2003. This paper describes education activities and reports the results.

  9. Development and engineering plan for graphite spent fuels conditioning program

    International Nuclear Information System (INIS)

    Bendixsen, C.L.; Fillmore, D.L.; Kirkham, R.J.; Lord, D.L.; Phillips, M.B.; Pinto, A.P.; Staiger, M.D.

    1993-09-01

    Irradiated (or spent) graphite fuel stored at the Idaho Chemical Processing Plant (ICPP) includes Fort St. Vrain (FSV) reactor and Peach Bottom reactor spent fuels. Conditioning and disposal of spent graphite fuels presently includes three broad alternatives: (1) direct disposal with minimum fuel packaging or conditioning, (2) mechanical disassembly of spent fuel into high-level waste and low-level waste portions to minimize geologic repository requirements, and (3) waste-volume reduction via burning of bulk graphite and other spent fuel chemical processing of the spent fuel. A multi-year program for the engineering development and demonstration of conditioning processes is described. Program costs, schedules, and facility requirements are estimated

  10. Development of biosensors and their application in metabolic engineering

    DEFF Research Database (Denmark)

    Zhang, Jie; Jensen, Michael Krogh; Keasling, Jay

    2015-01-01

    and ease of implementation with high-throughput analysis. Here we describe recent progress in biosensor development and their applications in a metabolic engineering context. We also highlight examples of how biosensors can be integrated with synthetic circuits to exert feedback regulation...... for the desired phenotypes. However, methods available for microbial genome diversification far exceed our ability to screen and select for those variants with optimal performance. Genetically encoded biosensors have shown the potential to address this gap, given their ability to respond to small molecule binding...

  11. Future Emissions from Railway Traffic

    DEFF Research Database (Denmark)

    Sorenson, Spencer C.

    1998-01-01

    In investigation of the expected development in factors which influence railway energy consumption and emissions. Traffic factors such as train speed, load, an occupancy were considered. Tehcnical factors such an emissions factors, fleet composition and train weight were also considered. An estim......In investigation of the expected development in factors which influence railway energy consumption and emissions. Traffic factors such as train speed, load, an occupancy were considered. Tehcnical factors such an emissions factors, fleet composition and train weight were also considered...

  12. Development and Evaluation of a Wide-Bed Former for Vegetable Cultivation in Controlled Tractor Traffic

    Science.gov (United States)

    Dixit, Anoop; Khurana, Rohinish; Verma, Aseem; Singh, Arshdeep; Manes, G. S.

    2018-05-01

    India is the second largest producer of vegetables in the world. For vegetable cultivation, a good seed bed preparation is an important task which involves 6-10 different operations. To tackle the issue of multiple operations, a prototype of tractor operated wide bed former was developed and evaluated. The machine comprises of a rotary tiller and a bed forming setup. It forms bed of 1000 mm top width which is suitable as per the track width of an average sized tractor in India. The height of the beds formed is 130 mm whereas the top and bottom width of channel formed on both sides of the bed is 330 and 40 mm respectively at soil moisture content of 12.5-16% (db). The forward speed of 2.75 km/h was observed to be suitable for proper bed formation. The average fuel consumption of the machine was 5.9 l/h. The average bulk density of soil before and after the bed formation was 1.46 and 1.63 g/cc respectively. Field capacity of the machine was found to be 0.31 ha/h. The machine resulted in 93.8% labour saving and 80.4% saving in cost of bed preparation as compared to conventional farmer practice. Overall performance of wide-bed former was found to be satisfactory.

  13. Area-wide traffic calming for preventing traffic related injuries.

    Science.gov (United States)

    Bunn, F; Collier, T; Frost, C; Ker, K; Roberts, I; Wentz, R

    2003-01-01

    It is estimated that by 2020 road traffic crashes will have moved from ninth to third in the world disease burden ranking, as measured in disability adjusted life years, and second in developing countries. The identification of effective strategies for the prevention of traffic related injuries is of global health importance. Area-wide traffic calming schemes that discourage through traffic on residential roads is one such strategy. To evaluate the effectiveness of area-wide traffic calming in preventing traffic related crashes, injuries, and deaths. We searched the following electronic databases: Cochrane Injuries Group's Specialised Register, Cochrane Controlled Trials Register, MEDLINE, EMBASE and TRANSPORT (NTIS, TRIS, TRANSDOC). We searched the web sites of road safety organisations, handsearched conference proceedings, checked reference lists of relevant papers and contacted experts in the area. The search was not restricted by language or publication status. Randomised controlled trials, and controlled before-after studies of area-wide traffic calming schemes. Two reviewers independently extracted data on type of study, characteristics of intervention and control areas, and length of data collection periods. Before and after data were collected on the total number of road traffic crashes, all road user deaths and injuries, pedestrian-motor vehicle collisions and road user deaths. The statistical package STATA was used to calculate rate ratios for each study, which were then pooled to give an overall estimate using a random effects model. We found no randomised controlled trials, but 16 controlled before-after trials met our inclusion criteria. Seven studies were done in Germany, six in the UK, two in Australia and one in the Netherlands. There were no studies in low or middle income countries. Eight trials reported the number of road traffic crashes resulting in deaths. The pooled rate ratio was 0.63 (0.14, 2.59 95% CI). Sixteen studies reported the number

  14. Development of engineering scale HLLW vitrification technique at PNC

    International Nuclear Information System (INIS)

    Nagaki, H.; Oguino, N.; Tsunoda, N.; Segawa, T.

    1979-01-01

    Some processes have been investigated to develop the technology of solidification of the high-level radioactive liquid waste generated from the nuclear fuel reprocessing plant operated by the Power Reactor and Nuclear Fuel Development Corporation (PNC) at Tokai-mura. This report covers the present state of development of a Joule-heated ceramic melter and a direct megahertz induction-heated melter. Engineering-scale tests have been performed with both melters. The Joule-heated melter could produce 45 kg or 16 liters of glass per hour. The direct-induction furnace was able to melt 5 kg or 1.8 liters of glass per hour. Both melters were composed of electrofused cast refractory brick. Thus it was possible to melt the glass at above 1200 0 C. Glass produced at higher melting temperatures is generally superior. 3 figures, 2 tables

  15. Human factors in remote control engineering development activities

    International Nuclear Information System (INIS)

    Clarke, M.M.; Hamel, W.R.; Draper, J.V.

    1983-01-01

    Human factors engineering, which is an integral part of the advanced remote control development activities at the Oak Ridge National Laboratory, is described. First, work at the Remote Systems Development Facility (RSDF) has shown that operators can perform a wide variety of tasks, some of which were not specifically designed for remote systems, with a dextrous electronic force-reflecting servomanipulator and good television remote viewing capabilities. Second, the data collected during mock-up remote maintenance experiments at the RSDF have been analyzed to provide guidelines for the design of human interfaces with an integrated advanced remote maintenance system currently under development. Guidelines have been provided for task allocation between operators, remote viewing systems, and operator controls. 6 references, 5 figures, 2 tables

  16. Sublimator Driven Coldplate Engineering Development Unit Test Results

    Science.gov (United States)

    Sheth, Rubik B.; Stephan, Ryan A.; Leimkuehler, Thomas O.

    2010-01-01

    The Sublimator Driven Coldplate (SDC) is a unique piece of thermal control hardware that has several advantages over a traditional thermal control scheme. The principal advantage is the possible elimination of a pumped fluid loop, potentially increasing reliability and reducing complexity while saving both mass and power. Because the SDC requires a consumable feedwater, it can only be used for short mission durations. Additionally, the SDC is ideal for a vehicle with small transport distances and low heat rejection requirements. An SDC Engineering Development Unit was designed and fabricated. Performance tests were performed in a vacuum chamber to quantify and assess the performance of the SDC. The test data was then used to develop correlated thermal math models. Nonetheless, an Integrated Sublimator Driven Coldplate (ISDC) concept is being developed. The ISDC couples a coolant loop with the previously described SDC hardware. This combination allows the SDC to be used as a traditional coldplate during long mission phases and provides for dissimilar system redundancy

  17. TRENDS IN PRODUCT DEVELOPMENT: CONCURRENT ENGINEERING AND MECHATRONICS

    Directory of Open Access Journals (Sweden)

    Stefan IANCU

    2013-05-01

    Full Text Available This paper presents the most significant contemporary trends in new industrial product development:concurrent engineering (CE and mechatronics (M. Author defines what CE and M are, emphasizing whatconnections are between these two concepts, and which are the ways of integration in CE and M. The mainconclusion of this paper is that both these two concepts have known a strongly development in 1975-1985’s,when Information and Communication Technologies (ICT was in full swing of development. The influence ofICT is undoubted, but, from this point of view, there are differences: if M could not be implemented in theabsence of the ICT, communication and computational technologies are not strictly necessary for theimplementation of CE.

  18. Necessity of nuclear power engineering development in Kazakstan

    International Nuclear Information System (INIS)

    Takibaev, Zh.S.; Cherepnin, Yu.S.

    1996-01-01

    Kazakstan is a great land country. Mining and delivery of great coal amount to power facilities will require to rise prices for electrical power. High expenditures for energy will lead to rising prime cost of every industry production unit produced in the country. If all power supply in the country is obtained from solid fuel, than geographical factor would be a heavy weight for it economy that would be not able to produce competition able. There is no doubt, that Kazakstan coal power supply will be prevailing electric power source for a long period of future. But it is urgently necessary consider and develop alternative conceptions for development of young country. There are a number of favourable reasons for atomic power engineering development

  19. Developing engineering design core competences through analysis of industrial products

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Lenau, Torben Anker

    2011-01-01

    Most product development work carried out in industrial practice is characterised by being incremental, i.e. the industrial company has had a product in production and on the market for some time, and now time has come to design a new and upgraded variant. This type of redesign project requires...... that the engineering designers have core design competences to carry through an analysis of the existing product encompassing both a user-oriented side and a technical side, as well as to synthesise solution proposals for the new and upgraded product. The authors of this paper see an educational challenge in staging...... a course module, in which students develop knowledge, understanding and skills, which will prepare them for being able to participate in and contribute to redesign projects in industrial practice. In the course module Product Analysis and Redesign that has run for 8 years we have developed and refined...

  20. Development of Engineering Design Education in the Department of Mechanical Engineering at Kanazawa Technical College

    Science.gov (United States)

    Yamada, Hirofumi; Ten-Nichi, Michio; Mathui, Hirosi; Nakamura, Akizi

    This paper introduces a method of the engineering design education for college of technology mechanical engineering students. In order to teach the practical engineering design, the MIL-STD-499A process is adapted and improved upon for a Mechatronics hands-on lesson used as the MOT method. The educational results in five years indicate that knowledge of the engineering management is useful for college students in learning engineering design. Portfolio for lessons and the hypothesis method also have better effects on the understanding of the engineering specialty.

  1. Simulation of traffic control signal systems

    Science.gov (United States)

    Connolly, P. J.; Concannon, P. A.; Ricci, R. C.

    1974-01-01

    In recent years there has been considerable interest in the development and testing of control strategies for networks of urban traffic signal systems by simulation. Simulation is an inexpensive and timely method for evaluating the effect of these traffic control strategies since traffic phenomena are too complex to be defined by analytical models and since a controlled experiment may be hazardous, expensive, and slow in producing meaningful results. This paper describes the application of an urban traffic corridor program, to evaluate the effectiveness of different traffic control strategies for the Massachusetts Avenue TOPICS Project.

  2. Developing an Onboard Traffic-Aware Flight Optimization Capability for Near-Term Low-Cost Implementation

    Science.gov (United States)

    Wing, David J.; Ballin, Mark G.; Koczo, Stefan, Jr.; Vivona, Robert A.; Henderson, Jeffrey M.

    2013-01-01

    The concept of Traffic Aware Strategic Aircrew Requests (TASAR) combines Automatic Dependent Surveillance Broadcast (ADS-B) IN and airborne automation to enable user-optimal in-flight trajectory replanning and to increase the likelihood of Air Traffic Control (ATC) approval for the resulting trajectory change request. TASAR is designed as a near-term application to improve flight efficiency or other user-desired attributes of the flight while not impacting and potentially benefiting ATC. Previous work has indicated the potential for significant benefits for each TASAR-equipped aircraft. This paper will discuss the approach to minimizing TASAR's cost for implementation and accelerating readiness for near-term implementation.

  3. Traffic signal synchronization.

    Science.gov (United States)

    Huang, Ding-wei; Huang, Wei-neng

    2003-05-01

    The benefits of traffic signal synchronization are examined within the cellular automata approach. The microsimulations of traffic flow are obtained with different settings of signal period T and time delay delta. Both numerical results and analytical approximations are presented. For undersaturated traffic, the green-light wave solutions can be realized. For saturated traffic, the correlation among the traffic signals has no effect on the throughput. For oversaturated traffic, the benefits of synchronization are manifest only when stochastic noise is suppressed.

  4. Development of a Gas-Fed Pulse Detonation Research Engine

    Science.gov (United States)

    Litchford, Ron J.; Hutt, John (Technical Monitor)

    2001-01-01

    In response to the growing need for empirical data on pulse detonation engine performance and operation, NASA Marshall Space Flight Center has developed and placed into operation a low-cost gas-fed pulse detonation research engine. The guiding design strategy was to achieve a simple and flexible research apparatus, which was inexpensive to build and operate. As such, the engine was designed to operate as a heat sink device, and testing was limited to burst-mode operation with run durations of a few seconds. Wherever possible, maximum use was made of standard off-the-shelf industrial or automotive components. The 5-cm diameter primary tube is about 90-cm long and has been outfitted with a multitude of sensor and optical ports. The primary tube is fed by a coaxial injector through an initiator tube, which is inserted directly into the injector head face. Four auxiliary coaxial injectors are also integrated into the injector head assembly. All propellant flow is controlled with industrial solenoid valves. An automotive electronic ignition system was adapted for use, and spark plugs are mounted in both tubes so that a variety of ignition schemes can be examined. A microprocessor-based fiber-optic engine control system was developed to provide precise control over valve and ignition timing. Initial shakedown testing with hydrogen/oxygen mixtures verified the need for Schelkin spirals in both the initiator and primary tubes to ensure rapid development of the detonation wave. Measured pressure wave time-of-flight indicated detonation velocities of 2.4 km/sec and 2.2 km/sec in the initiator and primary tubes, respectively. These values implied a fuel-lean mixture corresponding to an H2 volume fraction near 0.5. The axial distribution for the detonation velocity was found to be essentially constant along the primary tube. Time-resolved thrust profiles were also acquired for both underfilled and overfilled tube conditions. These profiles are consistent with previous time

  5. Hydraulic modeling development and application in water resources engineering

    Science.gov (United States)

    Simoes, Francisco J.; Yang, Chih Ted; Wang, Lawrence K.

    2015-01-01

    The use of modeling has become widespread in water resources engineering and science to study rivers, lakes, estuaries, and coastal regions. For example, computer models are commonly used to forecast anthropogenic effects on the environment, and to help provide advanced mitigation measures against catastrophic events such as natural and dam-break floods. Linking hydraulic models to vegetation and habitat models has expanded their use in multidisciplinary applications to the riparian corridor. Implementation of these models in software packages on personal desktop computers has made them accessible to the general engineering community, and their use has been popularized by the need of minimal training due to intuitive graphical user interface front ends. Models are, however, complex and nontrivial, to the extent that even common terminology is sometimes ambiguous and often applied incorrectly. In fact, many efforts are currently under way in order to standardize terminology and offer guidelines for good practice, but none has yet reached unanimous acceptance. This chapter provides a view of the elements involved in modeling surface flows for the application in environmental water resources engineering. It presents the concepts and steps necessary for rational model development and use by starting with the exploration of the ideas involved in defining a model. Tangible form of those ideas is provided by the development of a mathematical and corresponding numerical hydraulic model, which is given with a substantial amount of detail. The issues of model deployment in a practical and productive work environment are also addressed. The chapter ends by presenting a few model applications highlighting the need for good quality control in model validation.

  6. Using the Tools in TRADE I: A Decision Support System for Traffic Light maintenance

    NARCIS (Netherlands)

    van Vlijmen, S.F.M.; Wieringa, Roelf J.

    1997-01-01

    In this report we develop a specification of requirements and conceptual design of a decision support system for maintenance of the lamps in traffic regulation systems. Requirements and design are both specified using semi-formal techniques in TRADE (Toolkit for Requirements and Design Engineering).

  7. Search Engine Optimization

    CERN Document Server

    Davis, Harold

    2006-01-01

    SEO--short for Search Engine Optimization--is the art, craft, and science of driving web traffic to web sites. Web traffic is food, drink, and oxygen--in short, life itself--to any web-based business. Whether your web site depends on broad, general traffic, or high-quality, targeted traffic, this PDF has the tools and information you need to draw more traffic to your site. You'll learn how to effectively use PageRank (and Google itself); how to get listed, get links, and get syndicated; and much more. The field of SEO is expanding into all the possible ways of promoting web traffic. This

  8. 76 FR 10403 - Hewlett Packard (HP), Global Product Development, Engineering Workstation Refresh Team, Working...

    Science.gov (United States)

    2011-02-24

    ...), Global Product Development, Engineering Workstation Refresh Team, Working On-Site at General Motors..., Non-Information Technology Business Development Team and Engineering Application Support Team, working... Hewlett Packard, Global Product Development, Engineering Workstation Refresh Team, working on-site at...

  9. 75 FR 48411 - Research, Engineering and Development Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-08-10

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development.... 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development (R, E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: September...

  10. How Congested Jakarta is? Perception of Jakarta’s Citizen on Traffic Congestion

    Directory of Open Access Journals (Sweden)

    Muhammad Halley Yudhistira

    2017-11-01

    Full Text Available This paper aims to reveal the behavior and perception of Jakarta’s citizens on traffic congestion in Jakarta. Although this approach is somewhat well-developed in behavioral science, its utilization in urban economics study, is still limited. Detecting the traffic congestion and its cause mainly relies on physical (engineering methods, i.e V/C ratio. Here, we define the traffic congestion through two variables; ordinal traffic congestion perception and proportion of expected travel time to perceived travel time. Using a non-probabilistic sampling survey held in one of densest business district in Jakarta called Sudirman-Thamrin Golden Triangle Area; the estimation results show that travel behavior plays a major role in affecting travel time perceptions.

  11. Development of security engineering curricula at US universities

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.

    1998-06-01

    The Southwest Surety Institute was formed in 1996 to create unique, science-based educational programs in security engineering. The programs will integrate business, technology, and criminal justice elements to educate a new generation of security professionals. Graduates of the programs will better understand basic security system design and evaluation and contribute to strengthening of the body of knowledge in the area of security. A systematic approach incorporating people, procedures, and equipment will be taught that will emphasize basic security principles and establish the science of security engineering. The use of performance measures in the analysis of designed systems will enable effective decisions by an enterprise and provide the rationale for investment in security systems. Along with educational programs, Institute members will conduct original research and development built on existing relationships with sponsors from government and industry in areas such as counterterroism, microelectronics, banking, aviation, and sensor development. Additional information and updates on the Southwest Surety Institute are available via the Institute home page at www.emrtc.nmt.edu/ssi.

  12. Developing Smartphone Apps for Education, Outreach, Science, and Engineering

    Science.gov (United States)

    Weatherwax, A. T.; Fitzsimmons, Z.; Czajkowski, J.; Breimer, E.; Hellman, S. B.; Hunter, S.; Dematteo, J.; Savery, T.; Melsert, K.; Sneeringer, J.

    2010-12-01

    The increased popularity of mobile phone apps provide scientists with a new avenue for sharing and distributing data and knowledge with colleagues, while also providing meaningful education and outreach products for consumption by the general public. Our initial development of iPhone and Android apps centered on the distribution of exciting auroral images taken at the South Pole for education and outreach purposes. These portable platforms, with limited resources when compared to computers, presented a unique set of design and implementation challenges that we will discuss in this presentation. For example, the design must account for limited memory; screen size; processing power; battery life; and potentially high data transport costs. Some of these unique requirements created an environment that enabled undergraduate and high-school students to participate in the creation of these apps. Additionally, during development it became apparent that these apps could also serve as data analysis and engineering tools. Our presentation will further discuss our plans to use apps not only for Education and Public Outreach, but for teaching, science and engineering.

  13. Advanced tendencies in development of photovoltaic cells for power engineering

    Science.gov (United States)

    Strebkov, D. S.

    2015-01-01

    Development of solar power engineering must be based on original innovative Russian and world technologies. It is necessary to develop promising Russian technologies of manufacturing of photovoltaic cells and semiconductor materials: chlorine-free technology for obtaining solar silicon; matrix solar cell technology with an efficiency of 25-30% upon the conversion of concentrated solar, thermal, and laser radiation; encapsulation technology for high-voltage silicon solar modules with a voltage up to 1000 V and a service life up to 50 years; new methods of concentration of solar radiation with the balancing illumination of photovoltaic cells at 50-100-fold concentration; and solar power systems with round-the-clock production of electrical energy that do not require energy storage devices and reserve sources of energy. The advanced tendency in silicon power engineering is the use of high-temperature reactions in heterogeneous modular silicate solutions for long-term (over one year) production of heat and electricity in the autonomous mode.

  14. Systems engineering identification and control of mixed waste technology development

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1997-01-01

    The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department's commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper

  15. Complex approach in telecommunication engineering education: develop engineering skills by a team project

    Directory of Open Access Journals (Sweden)

    Scripcariu Luminița

    2017-01-01

    Full Text Available This paper provides an overview of the educational process of telecommunication engineering students by presenting the preparation of a team project focused on information security. Our educational approach combines basic knowledge such as mathematics with specialized engineering notions and various skills. The project theme is to design, implement and test an encryption algorithm. Students are provided with online courses, specific software programs and Internet access. They have to choose an encryption algorithm, to study its details and to write the script of the encryption algorithm in MATLAB program. The algorithm is implemented in C/C++ programming language and tested. Finally, a concurrent team tries to break the algorithm by finding the decryption key. It is an interactive approach which combines various education methods including gaming concepts. The covered topics provide students professional outcomes such as knowledge and use of specific mathematical tools and software environments (C/C ++ programming languages, MATLAB, abilities to design, develop, implement and test software algorithms. The project also provides transversal outcomes such as ability to team work, skills of computer use and information technology and capability to take responsibilities. Creativity is also encouraged by extending the algorithm to other encryption key lengths than the usual ones.

  16. An Integrated Surface Engineering Technology Development for Improving Energy Efficiency of Engine Components

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Hsu; Liming Chang; Huan Zhan

    2009-05-31

    Frictional losses are inherent in most practical mechanical systems. The ability to control friction offers many opportunities to achieve energy conservation. Over the years, materials, lubricants, and surface modifications have been used to reduce friction in automotive and diesel engines. However, in recent years, progress in friction reduction technology has slowed because many of the inefficiencies have been eliminated. A new avenue for friction reduction is needed. Designing surfaces specifically for friction reduction with concomitant enhanced durability for various engine components has emerged recently as a viable opportunity due to advances in fabrication and surface finishing techniques. Recently, laser ablated dimples on surfaces have shown friction reduction properties and have been demonstrated successfully in conformal contacts such as seals where the speed is high and the load is low. The friction reduction mechanism in this regime appears to depend on the size, patterns, and density of dimples in the contact. This report describes modeling efforts in characterizing surface textures and understanding their mechanisms for enhanced lubrication under high contact pressure conditions. A literature survey is first presented on the development of descriptors for irregular surface features. This is followed by a study of the hydrodynamic effects of individual micro-wedge dimples using the analytical solution of the 1-D Reynolds equation and the determination of individual components of the total friction resistance. The results obtained provide a better understanding of the dimple orientation effects and the approach which may be used to further compare the friction reduction provided by different texture patterns.

  17. Update of development on the new Audi NSU rotary engine generation. [for application to aircraft engines

    Science.gov (United States)

    Vanbasshuysen, R.

    1978-01-01

    Rotary engines with a chamber volume of 750 cc as a two rotor automotive powerplant, called KKM 871 are described. This engine is compared to a 3 liter or 183 cubic inch, six-cylinder reciprocating engine. Emphasis is placed on exhaust emission control and fuel economy.

  18. Examining perimeter gating control of urban traffic networkswith locally adaptive traffic signals

    NARCIS (Netherlands)

    Keyvan Ekbatani, M.; Gao, X.; Gayah, V.V.; Knoop, V.L.

    2015-01-01

    Traditionally, urban traffic is controlled by traffic lights. Recent findings of the Macroscopic or Network Fundamental Diagram (MFD or NFD) have led to the development of novel traffic control strategies that can be applied at a networkwide level. One pertinent example is perimeter flow control

  19. TECHNOLOGICAL CONTRIBUTIONS OF THE MILITARY ENGINEERING TO THE NATIONAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    RODRIGO CARO DE KARTZOW

    2018-01-01

    Full Text Available The development of the Chilean military industry is closely related to the growing of the national industry. Similarly to the way the history of the Army and the country are tightly related, the history of the military engineering is an example of organic growth when compared to its civilian counterpart. Collaboration instead of competition is the distinctive seal that best shows the development of weaponry, explosives, cartography and nuclear power. This collaboration have lasted with the years and we can afirm today that the relationship within civilian professionals and technicians and their military counterparts has reached an state that has never seen before. The governmental policies that fund R&D of initiatives that facilitate the science and technology study and research, come of a futuristic vision, born in the rim of the independent movements, driven naturally by the need of self sustain as sovereign nations.

  20. Engineering development studies for integrated evacuated CPC arrays

    Science.gov (United States)

    Winston, R.

    1982-04-01

    An evacuated tube concentrator which achieves respectable high temperature performance (100 C to 300 C) was developed. The design concept utilizes nonimaging CPC type concentration integrated into each tube by shaping the outer glass vacuum envelope. The detailed design, prototype fabrication and preliminary test measurements are reviewed. In addition the results of this first study specifically devoted to engineering development questions related to practical applications of this collector concept are summarized. Questions having to do with the deployment of medium to large area arrays, optimizations of the manifolding of individual tube panels, selected near term applications (with an emphasis on residential cooling based on Rankine driven chillers) and long term performance projections are addressed.