Matter-Wave Tractor Beams

DEFF Research Database (Denmark)

Gorlach, Alexey A.; Gorlach, Maxim A.; Lavrinenko, Andrei

2017-01-01

Optical and acoustic tractor beams are currently the focus of intense research due to their counterintuitive property of exerting a pulling force on small scattering objects. In this Letter we propose a matter-wave tractor beam and utilize the de Broglie waves of nonrelativistic matter particles...... are compared, and the matter-wave pulling force is found to have exclusive properties of dragging slow particles in short-range potentials. We envisage that the use of tractor beams could lead to the unprecedented precision in manipulation with atomic-scale quantum objects....

Mechanical Design of Downhole Tractor Based on Two-Way Self-locking Mechanism

Science.gov (United States)

Fang, Delei; Shang, Jianzhong; Luo, Zirong; Wu, Guoheng; Liu, Yiying

2018-03-01

Based on the technology of horizontal well tractor, a kind of downhole tractor was developed which can realize Two-Way self-locking function. Aiming at the needs of horizontal well logging to realize the target of small size, high traction and high reliability, the tractor selects unique heart-shaped CAM as the locking mechanism. The motion principle of telescopic downhole tractor, the design of mechanical structure and locking principle of the locking mechanism are all analyzed. The mathematical expressions of traction are obtained by mechanical analysis of parallel support rod in the locking mechanism. The force analysis and contour design of the heart-shaped CAM are performed, which can lay the foundation for the development of tractor prototype.

Research and Implementation of Tractor Power Shift Clutch Control System

OpenAIRE

Li Chengjun; Ke Meicong; Wu Youyu

2018-01-01

Applying power shift control technology on tractor can improve the power, economy and driving comfort of tractor. The separation and engagement control of clutch in tractor power shift transmission system is the key factor to optimize the quality of shift. Through many experiments and tests, an electronic control unit based on MC9S12 was developed, and an effective clutch control strategy was put forward, which improved the jerk of power shift and shortened the gear shift time.

Design and Development of A Three-Point Auto Hitch Dynamometer for An Agricultural Tractor

Directory of Open Access Journals (Sweden)

A. F. Kheiralla

2017-12-01

Full Text Available This paper describes the design, development and calibration of a three-point auto hitch dynamometer for measuring the horizontal and vertical forces that existed at the three-point hitch of an agricultural tractor.  The design concept of the dynamometer was based on an instrumented inverted U frame assembly that was mounted between tractor links and implement. The design incorporates for both lower point hitch spread and mast height adjustments, and quick hitch capability in accordance with category 1 and II three-point hitch system.  The force sensing elements were comprised of three steel extended octagonal ring transducers that were located between the inverted U frame and hook brackets.  Electrical resistance strain gauges were mounted on the extended octagonal ring transducer at strain angle nodes to independently monitor strains that were proportional to the horizontal and vertical forces at the ring center. Each transducer was designed for maximum horizontal and vertical forces of 25 kN and 10 kN at measurement mean sensitivities of 25.19 µStrain/kN and 25.60 µStrain/kN, respectively. However, the complete dynamometer has been designed to measure the maximum resultant horizontal and vertical forces of 50 kN and 20 kN, respectively.  Field demonstration tests on the dynamometer and data acquisition system showed that they were able to function effectively as intended.  The data acquisition system was able to successfully scan and record the dynamometer signals as programmed.  This dynamometer was part of the complete instrumentation system to be developed onboard a Massey Ferguson 3060 tractor for the generation of a comprehensive database on the power and energy requirements of the tractor and its working implement in the field.

Ergonomic assessment of some commonly used tractors in Iran

Directory of Open Access Journals (Sweden)

M. A Rostami

2015-09-01

Full Text Available Introduction: Different models of tractors have been imported from foreign countries or assembled in Iran for many years. Consistency of foreign manufactured products with native specifications and the improvement of locally manufactured tractors are important problems that must be considered. Moreover, tractor dimensions, sitting space and some other important factors such as the ability of Iranian users to operate them must be taken into consideration. In this study, we surveyed the proper proportion of tractors dimension, location of control tools and driver’s work space, with Iranian users’ anthropometric data of drivers from five provinces. Human factors are of paramount importance in developing farm machinery given that these machines will often be operated by persons with minimum skills. Therefore, farm machinery should be made simple to operate and as free from hazards as possible. Materials and methods: Firstly, the anthropometric data for 250 users 20-60 years old was calculated. The drivers were selected randomly. Then the specifications of 4 tractors including: Ferguson 285, Ferguson 399, Valtra and New Holland were compared with the anthropometric data of user in 5th and 95th percentile value and their adaptation was studied. Anthropometric Data of subjects consisted of: standing height, full hand length, popliteal length, seat pan width, seat pan depth, elbow height, seat back support height, hand pan width, hand grip and full-leg length. Getting on the tractor is the first contact of an operator with a tractor. In assessing the suitability of the provision made for getting on the tractor, an experiment was arranged in which operators tried to get on 3 tractors. The mode of getting on the tractors, the agony on the operator’s face, the muscular reactions and individual opinion on the difficulties or comfort while undertaking the task were observed and recorded. The specifications of tractors compared with Anthropometric Data

Field Tests of a Tractor Rollover Detection and Emergency Notification System.

Science.gov (United States)

Liu, B; Koc, A B

2015-04-01

The objective of this research was to assess the feasibility of a rollover detection and emergency notification system for farm tractors using field tests. The emergency notification system was developed based on a tractor stability model and implemented on a mobile electronic device with the iOS operating system. A complementary filter was implemented to combine the data from the accelerometer and gyroscope sensors to improve their accuracies in calculating the roll and pitch angles and the roll and pitch rates. The system estimates a stability index value during tractor operation, displays feedback messages when the stability index is lower than a preset threshold value, and transmits emergency notification messages when an overturn happens. Ten tractor rollover tests were conducted on a field track. The developed system successfully monitored the stability of the tractor during all of the tests. The iOS application was able to detect rollover accidents and transmit emergency notifications in the form of a phone call and email when an accident was detected. The system can be a useful tool for training and education in safe tractor operation. The system also has potential for stability monitoring and emergency notification of other on-road and off-road motorized vehicles.

Optical tractor Bessel polarized beams

International Nuclear Information System (INIS)

Mitri, F.G.; Li, R.X.; Guo, L.X.; Ding, C.Y.

2017-01-01

Axial and transverse radiation force cross-sections of optical tractor Bessel polarized beams are theoretically investigated for a dielectric sphere with particular emphasis on the beam topological charge (or order), half-cone angle and polarization. The angular spectrum decomposition method (ASDM) is used to derive the non-paraxial electromagnetic (EM) field components of the Bessel beams. The multipole expansion method using vector spherical harmonics is utilized and appropriate beam-shape coefficients are derived in order to compute the radiation force cross-sections. The analysis has no limitation to a particular range of frequencies such that the Rayleigh, Mie or geometrical optics regimes can all be considered effectively using the present rigorous formalism. The focus of this investigation is to identify some of the tractor beam conditions so as to achieve retrograde motion of a dielectric sphere located arbitrarily in space. Numerical computations for the axial and transverse radiation force cross-sections are presented for linear, right-circular, radial, azimuthal and mixed polarizations of the individual plane waves forming the Bessel beams of zeroth- and first-order (with positive or negative helicity), respectively. As the sphere shifts off the beam's axis, the axial pulling (tractor) force is weakened. Moreover, the transverse radiation force cross-section field changes with the sphere's size factor ka (where k is the wavenumber and a is the sphere radius). Both stable and unstable equilibrium regions around the beam's axis are found, depending on the choice of ka and the half-cone angle α_0. These results are particularly important in the development of emergent technologies for the photophoretic assembly of optically-engineered (meta)materials with designed properties using optical tractor (vortex) beams, particle manipulation, levitation and positioning, and other applications. - Highlights: • Optical tractor Bessel polarized beams are

Vibration analysis on driver’s seat of agricultural tractors during tillage tests

International Nuclear Information System (INIS)

Gialamas, T.; Gravalos, I.; Kateris, D.; Xyradakis, P.; Dimitriadis, C.

2016-01-01

The vibration of the driver’s seat of agricultural tractors was investigated during three alternative tillage operations. Three tractors including a range of specifications were considered, at a range of forward speeds. The interactions between the tractors, implements and speeds were examined using the SPSS program and the GLM-ANOVA method. The results analysis indicated that the tractors played the first major role in vibration development in the lateral axis and was followed by the implements. In contrast, the implements played the first major role in the development of vibration in the horizontal axis and are followed by factor tractors. The statistically significant effect in vertical and horizontal axes shows the factor implements. In addition, the statistically significant effect in the vertical and lateral axes shows again the implements to be the most significant factor. Of the implements, the plough shows the highest vibration and displays statistically significant difference in comparison with the other implements.

Vibration analysis on driver’s seat of agricultural tractors during tillage tests

Energy Technology Data Exchange (ETDEWEB)

Gialamas, T.; Gravalos, I.; Kateris, D.; Xyradakis, P.; Dimitriadis, C.

2016-07-01

The vibration of the driver’s seat of agricultural tractors was investigated during three alternative tillage operations. Three tractors including a range of specifications were considered, at a range of forward speeds. The interactions between the tractors, implements and speeds were examined using the SPSS program and the GLM-ANOVA method. The results analysis indicated that the tractors played the first major role in vibration development in the lateral axis and was followed by the implements. In contrast, the implements played the first major role in the development of vibration in the horizontal axis and are followed by factor tractors. The statistically significant effect in vertical and horizontal axes shows the factor implements. In addition, the statistically significant effect in the vertical and lateral axes shows again the implements to be the most significant factor. Of the implements, the plough shows the highest vibration and displays statistically significant difference in comparison with the other implements.

Monitoring of the tractor working parameters from the CAN-Bus

Directory of Open Access Journals (Sweden)

Giovannni Molari

2013-09-01

Full Text Available The analysis of the tractor mission profile is one of the main objectives for tractor manufacturers. The mission profile has usually been estimated through the use of questionnaires submitted to consumers. This procedure is time-consuming and not totally reliable due to the trustworthiness in the questionnaire compilation. In all the high power tractors numerous transducers are fitted to monitor some parameters to optimise the operation of the machines. All of these transducers are connected to an electronic central unit or with the tractor CAN-Bus. In this context, a system able to monitor the working parameters of the machines capitalising the existing transducers could represent the optimal solution for monitoring tractors distributed in different regions. The high number of signals are in any case difficult to memorise without a high quantity of memory. The goal of the paper is to define a methodology to memorise the operation parameters useful to define the mission profile of a tractor using a small memory. A tractor of a nominal power of 230 kW was selected and a system able to measure the signals acquired by the transducers fitted on the tractor was connected to the CAN Bus of the tractor. After a detailed analysis of the parameters measured on the tractor, the useful parameters were defined and acquired in different working conditions. The analysis of the parameters stored in the memory has allowed a detailed analysis of the operational parameters of the tractor in different applications. These parameters could be used by engineers to design tractors with a higher quality and reliability and also to define predictive maintenance criteria and reduce unexpected tractor failures.

Wireline tractor production logging experience in Australian horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Local, E.; Searight, T. L.

1998-12-31

Australian experiences with the development of new wireline tractor technology and its successful application to deploy production logging tools in horizontal wells was discussed. Dynamics of the tractor operations have been modelled and the model was validated with field data. The field data was also used to quantify borehole friction coefficients. Successful application in the field indicates that the tough tubing capability of the tractor, combined with its capacity to drive in large casing sizes, makes wireline deployment possible in a wide range of well completions. Work on a number of new applications such as the capability to negotiate complex downhole hardware, and to intervene in completions with widely differing tubing diameters, is in progress. 5 refs., 1 tab., 10 figs.

Optical tractor Bessel polarized beams

Science.gov (United States)

Mitri, F. G.; Li, R. X.; Guo, L. X.; Ding, C. Y.

2017-01-01

Axial and transverse radiation force cross-sections of optical tractor Bessel polarized beams are theoretically investigated for a dielectric sphere with particular emphasis on the beam topological charge (or order), half-cone angle and polarization. The angular spectrum decomposition method (ASDM) is used to derive the non-paraxial electromagnetic (EM) field components of the Bessel beams. The multipole expansion method using vector spherical harmonics is utilized and appropriate beam-shape coefficients are derived in order to compute the radiation force cross-sections. The analysis has no limitation to a particular range of frequencies such that the Rayleigh, Mie or geometrical optics regimes can all be considered effectively using the present rigorous formalism. The focus of this investigation is to identify some of the tractor beam conditions so as to achieve retrograde motion of a dielectric sphere located arbitrarily in space. Numerical computations for the axial and transverse radiation force cross-sections are presented for linear, right-circular, radial, azimuthal and mixed polarizations of the individual plane waves forming the Bessel beams of zeroth- and first-order (with positive or negative helicity), respectively. As the sphere shifts off the beam's axis, the axial pulling (tractor) force is weakened. Moreover, the transverse radiation force cross-section field changes with the sphere's size factor ka (where k is the wavenumber and a is the sphere radius). Both stable and unstable equilibrium regions around the beam's axis are found, depending on the choice of ka and the half-cone angle α0. These results are particularly important in the development of emergent technologies for the photophoretic assembly of optically-engineered (meta)materials with designed properties using optical tractor (vortex) beams, particle manipulation, levitation and positioning, and other applications.

Tractor Safety. Unit A-9.

Science.gov (United States)

Luft, Vernon D.; Backlund, Paul

This document is a teacher's guide for a unit in tractor and machinery safety for college freshmen. It is intended to be used for 10 hours of instruction for freshmen who are intending to work on or around machinery. Safety hazards directly and indirectly related to many types of machinery are covered in addition to tractors. The objectives of the…

The Influence of Tractor-Seat Height above the Ground on Lateral Vibrations

Directory of Open Access Journals (Sweden)

Jaime Gomez-Gil

2014-10-01

Full Text Available Farmers experience whole-body vibrations when they drive tractors. Among the various factors that influence the vibrations to which the driver is exposed are terrain roughness, tractor speed, tire type and pressure, rear axle width, and tractor seat height above the ground. In this paper the influence of tractor seat height above the ground on the lateral vibrations to which the tractor driver is exposed is studied by means of a geometrical and an experimental analysis. Both analyses show that: (i lateral vibrations experienced by a tractor driver increase linearly with tractor-seat height above the ground; (ii lateral vibrations to which the tractor driver is exposed can equal or exceed vertical vibrations; (iii in medium-size tractors, a feasible 30 cm reduction in the height of the tractor seat, which represents only 15% of its current height, will reduce the lateral vibrations by around 20%; and (iv vertical vibrations are scarcely influenced by tractor-seat height above the ground. The results suggest that manufacturers could increase the comfort of tractors by lowering tractor-seat height above the ground, which will reduce lateral vibrations.

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

IMPROVEMENT OF ROAD-HOLDING ABILITY FOR “BELARUS” TRACTORS

Directory of Open Access Journals (Sweden)

V. P. Boikov

2016-01-01

Full Text Available Introduction of new efficient braking systems for energy-packed tractors is of great importance for agricultural production. Foreign tractor manufacturing companies are implementing brake systems and in addition to their main function they fulfil function for holding of the given driving direction. The paper considers achievements in the field of electronic systems for tractor road-holding ability. A diagram on proportion of high-power tractors in total export volume of tractors and machinery manufactured in Belarus in the period of 2007–2010 has been drawn in the paper. The paper also proposes a comparative diagram on tractor speeds of international manufacturers which can serve as indicators of speed and road-holding ability of tractors with special electronic systems and without them. The paper contains an analysis of various braking mechanisms of planetary gears and detailed description of their design. A scheme of a laboratory facility for investigation of planetary gear usage as a breaking mechanism while changing conditions of jamming has been presented in the paper. The paper provides description on graph dependencies of current strength and voltage on as a function of the braking torque which is applied to a planetary gear. Nowadays energy-packed “Belarus”-tractors of Class 5 do not have a separate braking for each of four wheels. Therefore, it is proposed to use planetary gearbox of the rear-axle drive being available in every wheel as the basis of a service brake with the purpose to implement the described design. Using such scheme it is possible to execute an introduction of electronic systems for road-holding ability. A generalized scheme of an electronic system for tractor road-holding ability which can ensure separate breaking of all tractor wheels has been drawn out on the basis of the existing automotive electronic systems.

System-wide electrification and appropriate functions of tractor and implement

Directory of Open Access Journals (Sweden)

Sebastian Tetzlaff

2015-10-01

Full Text Available The advantages of electric drive technology in industrial applications have been known for a long time. In addition to the flexibility and variability for the system integration, the very good controllability and the overload capacity should be mentioned. To increase the effectiveness of agricultural machinery and equipment crucially, the different electrical/electronic systems, drives and functions have to be interconnected machine internally and also externally, based on a system-wide approach. Thereby single machinery, machinery combinations and finally complete harvest chains can be used in a smarter and more efficient way. Using the example of a tractor-swather combination the suitability of electric drives itself and of the hybrid and interface concept is proven. Newly developed functions for overload protection and prediction of the working process are presented and their integration into the machine overarching energy and operational management is described. The transferability of the results and solutions to cognate applications is ensured. Keywords

Harvesting a short rotation forest

Energy Technology Data Exchange (ETDEWEB)

Perttu, K L [ed.

1984-12-01

Willow and Sallow, considered of great interest for Swedish conditions, present new problems in harvesting. Traditional logging techniques offer few elements of equipment or methods. Light whips may be comminuted to a bulk product, easy to handle, difficult to store, requiring a hot logging system - and requiring a heavy, powerful harvester. Aggregating the material introduces an intermediate wood-fuel unit, suitable for storing, transport and infeed into any comminuter. If the harvester produced billets it would require less energy for its operation and it may be used for other purposes such as pre-commercial thinning or row thinning during the growing season. A few groups of designers have worked on analyses of requirements and possible solutions. Test rigs for severing and bundling were built and evaluated. Public funding was made available for design work on harvesters. Five groups were selected to produce layout designs of large and small harvesters. An evaluation procedure was performed, leading to selection of two concepts, slightly reworked from their original shapes. One is a large self-propelled front-sutting harvester, the other is a harvesting unit to be mounted on a suitable farm tractor. With 3 refs.

Preliminary design of a coffee harvester

Directory of Open Access Journals (Sweden)

Raphael Magalhães Gomes Moreira

2016-10-01

Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

A fuel cell driven aircraft baggage tractor

Energy Technology Data Exchange (ETDEWEB)

Sterkenburg, Stefan van [HAN Univ. of Applied Sciences (Netherlands); Rijs, Aart van; Hupkens, Huib [Silent Motor Company, Arnhem (Netherlands)

2010-07-01

Silent Motor Company and the HAN University of Applied Science collaborate in the development of an aircraft baggage tractor. The baggage tractor is equipped with an 8kW fuel cell stack connected to a 26kWh battery-pack. The control system implemented minimizes the start-up time of the fuel cell system, protects the fuel cell against overload and underload and controls the State of Charge (SOC) of the battery to its optimum value. A practical SOC-determination method is implemented which does not need detailed knowledge about the batteries applied. This paper presents a description of the fuel cell system, its energy management system and SOC-determination method and the results of first test measurements. (orig.)

Chores at Times of Fatal or Serious Injuries Associated with Tractor Overturns with and without Rollover Protection

Directory of Open Access Journals (Sweden)

Henry P. Cole

2016-09-01

Full Text Available This study describes chores when farmers were either fatally or seriously injured and required emergency medical treatment as a result of overturns of tractors with or without rollover protective structures (ROPS. Data from the 2002 Kentucky Farm Tractor Overturn Survey were used for this study. The data were collected by a telephone survey of a population-based random sample of 6063 (7.98% of Kentucky’s 76,017 farm operators as listed in the Kentucky Agricultural Statistics Service database. Of farm operators interviewed, 551 (9.1% reported 603 overturns and 5512 (90.9% reported no overturns in the history of their farm, covering a period from 1925 to February 2002. Only the latest overturn was considered to improve recall accuracy. In addition, since the 1925 to 1959 time period had only 49 (8.1% of the overturns reported, (14 farmers did not provide the year of most recent overturn; only data from the 1960 to 2002 period (approximately 41 years were used. After making these adjustments, incidents evaluated included 25 cases (one fatal and four serious nonfatal injuries that involved ROPS-equipped tractor overturns and 88 cases (24 fatal and 64 serious nonfatal injuries that involved non-ROPS tractor overturns. Chores at highest risk for tractor overturns were identified for which educational and ROPS retrofit interventions could be emphasized. The highest frequency of overturn-related fatalities and nonfatal injuries were associated with hay harvesting, rotary mowing, and on-farm travel chores. These three chores represented 68.2% of fatal events and 50.0% of permanent and 56.6% of temporary disability overturn incidents. Tragically, in countries such as India and China with emerging mechanization, a large majority of tractors are produced without ROPS that can be expected to result in the same overturn-related epidemic of deaths experienced in highly mechanized countries, despite evidence of the protection provided by ROPS.

Depreciation Rates for Australian Tractors and Headers - Is Machinery Depreciation a Fixed or Variable Cost?

OpenAIRE

Tozer, Peter R.

2005-01-01

Seven different remaining value functions for tractors and harvesters were estimated using data from advertised prices for used farm equipment. The generalised Box-Cox model was used to nest six of the seven functions. The more complex Box- Cox function explained the data better, but simpler models such as the sum-of-theyears- digits, or double-square root models were no different and were easier to manipulate to estimate depreciation rates and costs. There were up to three components of depr...

Filtration Systems Design for Universal Oils in Agricultural Tractors

Directory of Open Access Journals (Sweden)

R. Majdan

2017-12-01

Full Text Available Three filtration systems using the tractor hydraulic circuit were proposed and verified during the tractors operation. Using the tractor-implement hydraulic system and filter body with accessories the universally useful filtration systems were designed. The designed filtration systems are the second stage of universal oil filtration whereas the first stage is the standard tractor filter. The decrease in the content of iron reached the values 25.53 %, 32.95 % and 41.55 % and the average decrease in oil contamination characterized by average value of decrease in content of iron, copper and silicium reached values 24.3 %, 24.7 % and 35.53 % in dependence on the filtration system and an oil contamination level. The decrease in contamination level verified the ability of designed filtration systems for agricultural tractors.

Conceptual design of a chickpea harvesting header

Directory of Open Access Journals (Sweden)

H. Golpira

2013-07-01

Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

Realization of compact tractor beams using acoustic delay-lines

Science.gov (United States)

Marzo, A.; Ghobrial, A.; Cox, L.; Caleap, M.; Croxford, A.; Drinkwater, B. W.

2017-01-01

A method for generating stable ultrasonic levitation of physical matter in air using single beams (also known as tractor beams) is demonstrated. The method encodes the required phase modulation in passive unit cells into which the ultrasonic sources are mounted. These unit cells use waveguides such as straight and coiled tubes to act as delay-lines. It is shown that a static tractor beam can be generated using a single electrical driving signal, and a tractor beam with one-dimensional movement along the propagation direction can be created with two signals. Acoustic tractor beams capable of holding millimeter-sized polymer particles of density 1.25 g/cm3 and fruit-flies (Drosophila) are demonstrated. Based on these design concepts, we show that portable tractor beams can be constructed with simple components that are readily available and easily assembled, enabling applications in industrial contactless manipulation and biophysics.

Accidents with tractors and agricultural machinery in public transport of Republic of Serbia without provinces

OpenAIRE

Gliogrevic, Kosta; Oljaca, Mico; Ruzicic, Lazar; Dimitrovski, Zoran

2012-01-01

Working processes in agriculture nowadays cannot be imagined without the use of modern agricultural mechanization, especially primary power unit, tractor. Along with the tractor unit development and the benefits induced by its application, according to the author’s research, these machines are one of the main causes of accidents with different types of violations of the participants, and the tragic consequences. The great number of those accidents with tractors and other agricultural machiner...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Science.gov (United States)

2010-10-01

.... Exception. If air and electrical connections necessary to couple or uncouple a truck-tractor from a trailer... 49 Transportation 5 2010-10-01 2010-10-01 false Truck and truck-tractor access requirements. 399... Vehicles § 399.207 Truck and truck-tractor access requirements. (a) General rule. Any person entering or...

Design, development, and evaluation of an automatic guidance system for tractor tracking along the contour line on inclined surfaces

Directory of Open Access Journals (Sweden)

S Dehghani

2016-04-01

Full Text Available Introduction: Automatic guidance of tractors in the mechanized farming practice has taken the attention of agricultural engineers in the last two decades. For this to be truly practical on the farm, it should be economical, simple to operate and entirely contained on the vehicle. Different types of steering systems such as leader- cable, laser- controlled, radio- operated and contactor- type have been developed for automatic guidance. The automatic leveling system is used on hillside machines to keep the separator level when operating on hillsides. This system has three parts: fluid level system, electrical system and hydraulic system. The fluid level system consists of fluid reservoir and a leveling control switch box. The fluid level system actuates the electrical system of the leveling unit. The electrical system which actuated by the fluid system consist of four micro switches in the leveling control switch box, two micro switches in the limit control box, a solenoid in the hydraulic control level, manual leveling control switch, and a leveling limit warning light. The hydraulic system maintains the level of the separator when the machine is operating on a hillside. The present study was aimed to develop a reliable, versatile and easy to maintain system to fit our economy and low technology level of farmers for hillside- range development or fallow farming. The automatic guidance system has been implemented successfully on agricultural vehicles on the basis of three components, i.e. sensors, processors and actuator elements. The study site (N, latitude; E, longitude; and 1810 m above sea level was located at the Agricultural Research Center, Shiraz University, 15 km northwest of Shiraz, Fars Province, Iran. MF-399 agricultural tractor manufactured by ITMCO, Tabriz, Iran was used for doing the experiments. Materials and Methods:The Level Sensing System: The biaxial tilt industrial sensor (ZCT245AL- China with digital output can be connected

The evaluations regarding tractor usage in farms in Eskişehir province

Directory of Open Access Journals (Sweden)

Neşe ALTINTAŞ

2014-12-01

Full Text Available Farmers’ demand of tractor, buying attitudes and satisfaction of tractor use are very important determinant for the decision makers in the sector. It is necessary that to be research of conditions of tractor use in farms and to be achieved certain data for efficient use of tractor in agricultural production. The survey forms which were prepared for this purpose have been filled in 2013 with 122 farmers which tractor owner and have been evaluated.

An experimental investigation of exhaust emission from agricultural tractors

Energy Technology Data Exchange (ETDEWEB)

Gholami, Rashid; Rabbani, Hekmat; Lorestani, Ali Nejat; Javadikia, Payam; Jaliliantabar, Farzad [Mechanics of Agricultural Machinery Department, Razi University of Kermanshah (Iran, Islamic Republic of)

2013-07-01

Agricultural machinery is an important source of emission of air pollutant in rural locations. Emissions of a specific tractor engine mainly depend on engine speed. Various driving methods and use of implements with different work capacities can affect the engine load. This study deals with the effects of types of tractors and operation conditions on engine emission. In this study two types of agricultural tractors (MF285 and U650) and some tillage implements such as centrifugal type spreader, boom type sprayer and rotary tiller were employed. Some of the exhausted gases from both tractors in each condition were measured such as, hydrocarbon (HC), carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2) and nitrogen oxide (NO). Engine oil temperature was measured at every step for both types of tractors. Difference between steady-state condition and operation conditions was evaluated. The results showed all exhaust gases that measured and engine oil temperature at every operation conditions are higher than steady-state condition. A general conclusion of the work was that, using various implements and employing different types of tractors effect on engine emissions. The results of variance analysis showed all exhausted gases had a significant relationship with types of implements used at 1%. Also, all exhausted gases except CO had a significant relationship with types of tractors. A further conclusion was that NO emission increased as engine oil temperature increased. The final conclusion was about the difference between MF285 and U650; using U650 at operation conditions is better than MF285 in terms of pollution.

A spatial cluster analysis of tractor overturns in Kentucky from 1960 to 2002.

Directory of Open Access Journals (Sweden)

Daniel M Saman

Full Text Available Agricultural tractor overturns without rollover protective structures are the leading cause of farm fatalities in the United States. To our knowledge, no studies have incorporated the spatial scan statistic in identifying high-risk areas for tractor overturns. The aim of this study was to determine whether tractor overturns cluster in certain parts of Kentucky and identify factors associated with tractor overturns.A spatial statistical analysis using Kulldorff's spatial scan statistic was performed to identify county clusters at greatest risk for tractor overturns. A regression analysis was then performed to identify factors associated with tractor overturns.The spatial analysis revealed a cluster of higher than expected tractor overturns in four counties in northern Kentucky (RR = 2.55 and 10 counties in eastern Kentucky (RR = 1.97. Higher rates of tractor overturns were associated with steeper average percent slope of pasture land by county (p = 0.0002 and a greater percent of total tractors with less than 40 horsepower by county (p<0.0001.This study reveals that geographic hotspots of tractor overturns exist in Kentucky and identifies factors associated with overturns. This study provides policymakers a guide to targeted county-level interventions (e.g., roll-over protective structures promotion interventions with the intention of reducing tractor overturns in the highest risk counties in Kentucky.

Costs of Tractor Ownership under Different Management Systems in ...

African Journals Online (AJOL)

Costs of Tractor Ownership under Different Management Systems in Nigeria. ... It requires high initial capital investment. ... making management plans and decisions especially in comparing different tractor types and models thereby assisting ...

30 CFR 77.409 - Shovels, draglines, and tractors.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shovels, draglines, and tractors. 77.409... COAL MINES Safeguards for Mechanical Equipment § 77.409 Shovels, draglines, and tractors. (a) Shovels... the operator prior to starting operation. (b) Shovels and draglines shall be equipped with handrails...

Agricultural Tractor Safety on Public Roads and Farms.

Science.gov (United States)

Department of Transportation, Washington, DC.

This study investigated the extent, causes, and means of preventing agricultural tractor accidents. The report includes an estimate of annual tractor-related deaths, an identification of the primary causes of such accidents with consideration of the major hazards causing death or injury, and recommendations or means for preventing the occurrence…

DETERMINATION OF TRANSMISSION GEAR RATIO IN MECHANICAL PART OF TRACTOR ELECTRO-MECHANICAL TRANSMISSION

Directory of Open Access Journals (Sweden)

Ch. I. Zhdanovich

2016-01-01

Full Text Available A methodology has been developed for selection of gear number and transmission gear ratios in mechanical part of a wheel-type tractor with electro-mechanical transmission containing a propulsion asynchronous electric motor with variablefrequency control. The paper proposes to determine a transmission gear ratio on the basis of the following: provision of wheel torque dependence on tractor speed which is the best one for a traction process and during transfer from one gear to the other; provision of nominal operational mode of the electric motor for all tractor operations where it is working for a long period of time; provision of minimum possible number of gears; complete realization of internal combustion engine power on the tractor wheels at limit operational mode of the electric motor. As a characteristic of the asynchronous electric motor with variable-frequency control contains various portions which can be used either completely or partially due to operating conditions, the gear number is determined in the process of transmission gear ration finding but not prior to this. A wheel torque of the tractor with electro-mechanical transmission can be limited according to the following factors: grip of wheel with supporting surface; maximum power of an internal combustion engine which can be transferred to the wheels and a torque which is developed by a propulsion electric motor. It is not proposed to exceed nominal operational mode of the propulsion electric motor for all the operations of the tractor if it is working for a long period of time because in the case of significant excess of the nominal operational mode of the asynchronous electric motor its rather long operation leads to low efficiency and high losses in power, large heat liberation and consequently requires to develop more complicated system for electric motor cooling. An excess of nominal electric motor torque can be justified for short-term operational modes because in this case

Social and Individual Influences on Tractor Operating Practices of Young Adult Agricultural Workers.

Science.gov (United States)

Rudolphi, Josie M; Campo, Shelly; Gerr, Fred; Rohlman, Diane S

2018-05-01

Tractor-related incidents are the leading cause of agricultural-related fatalities in the United States. Injuries from rollovers can be prevented by equipping tractors with rollover protective structures (ROPS, an engineering approach) and by using seatbelts (a behavior-based approach). While adult farmers report low seatbelt use and frequent use of tractors without ROPS, it is unknown whether the young adult population has adopted similar tractor driving practices. This study was designed to identify tractor operating practices among young adult agricultural workers and the influence of supervisors, peers, and parents on their safety behaviors. An online survey was conducted among college students enrolled in agricultural science classes in four Midwestern colleges and universities. Participants answered questions about their tractor operating practices, the influence of supervisors, peers, parents, and individual risk taking tendencies on their workplace practices. A tractor operation safety score was estimated from participants' responses. Linear regression was used to examine the association of these influences and the tractor operation safety score. Of the 193 respondents, most (78.8%) reported that they never or rarely wear a seatbelt when operating a tractor with a ROPS. Supervisory influences, such as being negatively evaluated by a supervisor, were found to be more strongly associated with tractor operating behaviors than peer or parent influence. Young adult agricultural workers frequently reported unsafe tractor operating behaviors. Supervisors were found to have the most influence over reported behaviors of young adult agricultural workers. Copyright © 2017 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Pulling cylindrical particles using a soft-nonparaxial tractor beam

DEFF Research Database (Denmark)

Novitsky, Andrey; Ding, Weiqiang; Wang, Maoyan

2017-01-01

In order to pull objects towards the light source a single tractor beam inevitably needs to be strongly nonparaxial. This stringent requirement makes such a tractor beam somewhat hypothetical. Here we reveal that the cylindrical shape of dielectric particles can effectively mitigate the nonparaxi......In order to pull objects towards the light source a single tractor beam inevitably needs to be strongly nonparaxial. This stringent requirement makes such a tractor beam somewhat hypothetical. Here we reveal that the cylindrical shape of dielectric particles can effectively mitigate...... the nonparaxiality requirements, reducing the incidence angle of the partial plane waves of the light beam down to 45 degrees and even to 30 degrees for respectively dipole and dipole-quadrupole objects. The optical pulling force attributed to the interaction of magnetic dipole and magnetic quadrupole moments...... and sorting of targeted particles....

performance (assessment) of two- wheel tractors for small holder

African Journals Online (AJOL)

CHIKA

and easy operation and maintenance; reasonably rugged ... whole the professional two- wheel tractor is expected to have ... in order to achieve reasonable productivity in developing .... producers of both food and cash crops in. Nigeria, power ...

WORK PRECARIOUSNESS: ERGONOMIC RISKS TO OPERATORS OF MACHINES ADAPTED FOR FOREST HARVESTING

Directory of Open Access Journals (Sweden)

Stanley Schettino

Full Text Available ABSTRACT This study aimed to assess different types of machines adapted for mechanized forest harvesting activities in order to quantify the degree of compliance with ergonomic principles applicable to forest machines, as well as the ergonomic risks to which workers are exposed. The following machines were evaluated: a feller buncher adapted into a wheel loader; a mini skidder coupled to an agricultural tractor; and a forest loader adapted to an agricultural tractor; operating in the states of Paraná and Minas Gerais. Biomechanical working conditions were assessed by applying a checklist for simplified assessment of the workplace biomechanical conditions. The forced postures assessment was performed using the REBA - "Rapid Entire Body Assessment" method. In turn, ergonomic classification was through guidelines contained in the ergonomic classification manual "Ergonomic Guidelines for Forest Machines". Moreover, the environmental factors noise, temperature and vibration to which the operators of these machines were exposed were assessed. The results showed all assessed machines had ergonomic standards below those indicated in all assessed aspects, mainly related to access and dimensions of the workplace, need to adopt forced postures during working hours, and exposure to environmental factors assessed above tolerance limits. It is concluded that machines adapted for use in forest harvesting processes have shown significant gaps in relation to ergonomic aspects, presenting high and imminent risk of development of occupational diseases in their operators.

Tractor performance monitor based on a single-chip microcomputer

Energy Technology Data Exchange (ETDEWEB)

Bedri, A.R.; Marley, S.J.; Buchelle, W.F.; Smay, T.A.

1981-01-01

A tractor performance monitor based on a single-chip microcomputer was developed to measure ground speed, slip, fuel consumption (rate and total), total area, theoretical time, and total time. Transducers used are presented in detail. 5 refs.

EFFICIENCY ANALYSIS OF ENERGY ACCUMULATING MECHANISM FOR TRACTOR WITH ELECTROMECHANICAL TRANSMISSION

Directory of Open Access Journals (Sweden)

Ch. I. Zhdanovich

2017-01-01

Full Text Available Dependence of tractor wheel torque on theoretical tractor motion speed has been used for comparison of tractor operation with electromechanical transmission with installation of energy accumulating mechanism and without its installation. In this case a traction asynchronous electric motor is operating under nominal and limit conditions. The paper also considers dependence diagrams of actual input power for the traction asynchronous electric motor and its losses due to theoretical tractor motion speed. Tractor wheel torque is limited during the operation of the traction asynchronous electric motor with energy accumulating mechanisms by the following factors: maximum electric motor torque at the given frequency of supply voltage; maximum value of internal combustion motor output which can be transferred to the traction asynchronous electric motor; grip of the wheels. During the operation of the traction asynchronous electric motor with energy accumulating mechanisms there is a possibility for short power consumption without regard to the second limitation because it is possible to use power not only of internal combustion motor but also the power which is stored in the energy accumulating mechanisms. Comparison of characteristics has been made when a tractor is operating at high gear and when it is operating at all gears (that is two gears. Operation of the 5th class tractors has been analyzed for all possible cases (operation with energy accumulating mechanisms and without the mechanisms while being operated at all gears and various types of work: tilling, sowing, cultivation, bulldozing work, transport mode. In this case equipment has been used which is aggregated with the 5th class tractor. 

Investigation of UK Farmer Go/No-Go Decisions in Response to Tractor-Based Risk Scenarios.

Science.gov (United States)

Irwin, Amy; Poots, Jill

2018-01-01

Tractors are a source of injury and fatality in agriculture. Despite this farmers continue to engage in risk-taking behaviors, including operating tractors without appropriate equipment. In order to change behaviors and attitudes toward safety, it is important to understand how farmers approach different types of risk relevant to tractor use. The current study used a qualitative approach to investigate farmer perception of four types of tractor-based risk related to self, equipment, lack of safety features, and environment. A sample of 148 farmers from the United Kingdom and Ireland was recruited from farming forums to take part in an online scenario-based qualitative study. Participants were presented with 12 tractor-based scenarios, three from each category of risk, and asked to indicate if they would proceed to use the tractor (go) or not (no-go), then report their reasoning. Thematic analysis was used to identify data patterns. Farmers appeared to assess the consequences of risk in broader terms than the risk of injury to themselves; they also evaluated risk in terms of potential costs (e.g., repair bill) and losses (e.g., delay). Analysis indicated that financial risk was considered with more caution than personal risk in many cases. Farmers also considered usability, such as the functionality of tractor seat belts, indicating the importance of ensuring all safety equipment is fit for purpose. The management of agricultural risk should consider farmer priorities (such as financial costs) in order to develop effective messaging that focuses on those priorities, with the aim of reducing risk-taking behaviors.

Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method

Directory of Open Access Journals (Sweden)

A Nikkhah

2016-04-01

Full Text Available Introduction: Too many people are working in the agricultural sector and therefore, pay more attention to the safety and health at work in the agricultural sector is important. This issue is more important in developing industrial countries where the level of the ergonomic working condition is less than that of developed countries. Attention to ergonomic condition of agricultural machinery drivers is one of the goals of agricultural mechanization. Therefore, in this study the ergonomic conditions of brake and accelerator mechanisms for MF285 and MF399 tractor's drivers were investigated using a new method. Materials and Methods: 25 people were selected for experiment. The electrical activity of Medialis gastrocnemius, Lateralis gastrocnemius, Vastus medialis, Vastus lateralis, Quadratus Lumborum and Trapezius muscles of drivers before and during pressing the pedal and after rest time were recorded using Biovision device. Measurements were performed for each person on each muscle 30 seconds before pressing the pedal, 60 seconds after pressing the pedal and after 60 seconds of rest. For all drivers, the muscles on the right side (brake and accelerator side have been selected and tested. The measurements were performed in compliance with appropriate time intervals between the measurements. Results and Discussion: Ergonomic assessment of brake pedal: The results showed that the RMS electrical activity of muscles of Vastus medialis and Medial gastrocnemius, during 60 seconds braking were 2.47 and 1.97. So, Vastus medialis and Medial gastrocnemius had the highest stress during pressing the MF399 tractor's brake pedal. Moreover, the Medial gastrocnemius and Lateral gastrocnemius with RMS electrical activity ratio of 2.47 and 1.74 had the highest RMS electrical activity ratio respectively, during 60 seconds braking compared to before braking of MF285 tractor. The comparison of results showed that the Vastus medialis and Trapezius had the higher stress

Investigation of Tractor Base Bleeding for Heavy Vehicle Aerodynamic Drag Reduction

Energy Technology Data Exchange (ETDEWEB)

Ortega, J; Salari, K; Storms, B

2007-10-25

One of the main contributors to the aerodynamic drag of a heavy vehicle is tractor-trailer gap drag, which arises when the vehicle operates within a crosswind. Under this operating condition, freestream flow is entrained into the tractor-trailer gap, imparting a momentum exchange to the vehicle and subsequently increasing the aerodynamic drag. While a number of add-on devices, including side extenders, splitter plates, vortex stabilizers, and gap sealers, have been previously tested to alleviate this source of drag, side extenders remain the primary add-on device of choice for reducing tractor-trailer gap drag. However, side extenders are not without maintenance and operational issues. When a heavy vehicle pivots sharply with respect to the trailer, as can occur during loading or unloading operations, the side extenders can become crushed against the trailer. Consequently, fleet operators are forced to incur additional costs to cover the repair or replacement of the damaged side extenders. This issue can be overcome by either shortening the side extenders or by devising an alternative drag reduction concept that can perform just as effectively as side extenders. To explore such a concept, we investigate tractor base bleeding as a means of reducing gap drag. Wind tunnel measurements are made on a 1:20 scale heavy vehicle model at a vehicle width-based Reynolds number of 420,000. The tractor bleeding flow, which is delivered through a porous material embedded within the tractor base, is introduced into the tractor-trailer gap at bleeding coefficients ranging from 0.0-0.018. To determine the performance of tractor base bleeding under more realistic operating conditions, computational fluid dynamics simulations are performed on a full-scale heavy vehicle within a crosswind for bleeding coefficients ranging from 0.0-0.13.

Whole-Body Vibration in Farming: Background Document for Creating a Simplified Procedure to Determine Agricultural Tractor Vibration Comfort

Directory of Open Access Journals (Sweden)

Maurizio Cutini

2017-09-01

Full Text Available Operator exposure to high levels of whole-body vibration (WBV presents risks to health and safety and it is reported to worsen or even cause back injuries. Work activities resulting in operator exposure to whole-body vibration have a common onset in off-road work such as farming. Despite the wide variability of agricultural surface profiles, studies have shown that with changing soil profile and tractor speed, the accelerations resulting from ground input present similar spectral trends. While on the one hand such studies confirmed that tractor WBV emission levels are very dependent upon the nature of the operation performed, on the other, irrespective of the wide range of conditions characterizing agricultural operations, they led researchers to set up a possible and realistic simplification and standardization of tractor driver comfort testing activities. The studies presented herewith indicate the usefulness, and the possibility, of developing simplified procedures to determine agricultural tractor vibration comfort. The results obtained could be used effectively to compare tractors of the same category or a given tractor when equipped with different seats, suspension, tyres, etc.

Quantum coherent tractor beam effect for atoms trapped near a nanowaveguide

Science.gov (United States)

Sadgrove, Mark; Wimberger, Sandro; Nic Chormaic, Síle

2016-01-01

We propose several schemes to realize a tractor beam effect for ultracold atoms in the vicinity of a few-mode nanowaveguide. Atoms trapped near the waveguide are transported in a direction opposite to the guided mode propagation direction. We analyse three specific examples for ultracold 23Na atoms trapped near a specific nanowaveguide (i.e. an optical nanofibre): (i) a conveyor belt-type tractor beam effect, (ii) an accelerator tractor beam effect, and (iii) a quantum coherent tractor beam effect, all of which can effectively pull atoms along the nanofibre toward the light source. This technique provides a new tool for controlling the motion of particles near nanowaveguides with potential applications in the study of particle transport and binding as well as atom interferometry. PMID:27440516

Action Learning: A New Method to Increase Tractor Rollover Protective Structure (ROPS) Adoption

Science.gov (United States)

Biddle, Elyce Anne; Keane, Paul R.

2016-01-01

Action Learning is a problem-solving process that is used in various industries to address difficult problems. This project applied Action Learning to a leading problem in agricultural safety. Tractor overturns are the leading cause of fatal injury to farmworkers. This cause of injury is preventable using rollover protective structures (ROPS), protective equipment that functions as a roll bar structure to protect the operator in the event of an overturn. For agricultural tractors manufactured after 1976 and employee operated, Occupational Safety and Health Administration (OSHA) regulation requires employers to equip them with ROPS and seat belts. By the mid-1980s, US tractor manufacturers began adding ROPS on all farm tractors over 20 horsepower sold in the United States (http://www.nasdonline.org/document/113/d001656/rollover-protection-for-farm-tractor-operators.html). However, many older tractors remain in use without ROPS, putting tractor operators at continued risk for traumatic injury and fatality. For many older tractor models ROPS are available for retrofit, but for a variety of reasons, tractor owners have not chosen to retrofit those ROPS. The National Institute for Occupational Safety and Health (NIOSH) attempted various means to ameliorate this occupational safety risk, including the manufacture of a low-cost ROPS for self-assembly. Other approaches address barriers to adoption. An Action Learning approach to increasing adoption of ROPS was followed in Virginia and New York, with mixed results. Virginia took action to increase the manufacturing and adoption of ROPS, but New York saw problems that would be insurmountable. Increased focus on team composition might be needed to establish effective Action Learning teams to address this problem. PMID:22994641

Agricultural Tractor Selection: A Hybrid and Multi-Attribute Approach

Directory of Open Access Journals (Sweden)

Jorge L. García-Alcaraz

2016-02-01

Full Text Available Usually, agricultural tractor investments are assessed using traditional economic techniques that only involve financial attributes, resulting in reductionist evaluations. However, tractors have qualitative and quantitative attributes that must be simultaneously integrated into the evaluation process. This article reports a hybrid and multi-attribute approach to assessing a set of agricultural tractors based on AHP-TOPSIS. To identify the attributes in the model, a survey including eighteen attributes was given to agricultural machinery salesmen and farmers for determining their importance. The list of attributes was presented to a decision group for a case of study, and their importance was estimated using AHP and integrated into the TOPSIS technique. In this case, one tractor was selected from a set of six alternatives, integrating six attributes in the model: initial cost, annual maintenance cost, liters of diesel per hour, safety of the operator, maintainability and after-sale customer service offered by the supplier. Based on the results obtained, the model can be considered easy to apply and to have good acceptance among farmers and salesmen, as there are no special software requirements for the application.

Harvest and logistics for better profitability from small cultivations of Short Rotation Willow Coppice; Skoerdeteknik och logistik foer baettre loensamhet fraan smaa odlingar av Salix

Energy Technology Data Exchange (ETDEWEB)

Baky, Andras; Forsberg, Maya; Rosenqvist, Haakan; Jonsson, Nils; Sundberg, Martin

2010-06-15

In Sweden, the political desire to increase the amount of short rotation willow coppice (Salix) plantations has been expressed. However, for various reasons interest from farmers has been low. The hypothesis of this study is that the total area of Salix cultivation can be increased by also cultivating fields smaller than those generally considered economic today. In order to lower production costs, machine systems adapted for harvest of smaller fields are required. The possibility of using farmers' existing tractors and more convenient machines, as well as achieving lower machine costs for smaller fields, may increase farmers' interest. The long-term objective is to achieve large-scale deliveries of willow with small-scale solutions at farm level, as an option and complement to today's more large-scale systems for harvesting willow. Costs, energy use and climatic impact (CO{sub 2} emissions) for two harvest and logistical chains suitable for small fields have been calculated from field to energy plant, and methods for minimizing these costs have been analyzed. Comparison is made with the direct chipping system, the most commonly used in Sweden today. The systems studied comprised: 1. Direct bundling harvest system with a tractor-towed harvester, collection of bundles in the field with a trailer-mounted crane, and storage in a pile before delivery. Chipping is performed at the energy plant. 2. Direct billeting with a tractor-towed harvester accompanied simultaneously by a tractor and trailer for collection, and storage in a pile before delivery. 3. Direct chipping with a self-propelled modified forage harvester accompanied simultaneously by a tractor and container for collection, and direct delivery to plant. Both the billet and bundle systems show higher costs than the direct chipping system, irrespective of field size. The analysis of different scenarios and conditions shows possibilities of lowering the costs through certain measures. Furthermore

Involving fathers in teaching youth about farm tractor seatbelt safety--a randomized control study.

Science.gov (United States)

Jinnah, Hamida Amirali; Stoneman, Zolinda; Rains, Glen

2014-03-01

Farm youth continue to experience high rates of injury and deaths as a result of agricultural activities. Farm machinery, especially tractors, is the most common cause of casualties to youth. A Roll-Over Protection Structure (ROPS) along with a fastened seatbelt can prevent almost all injuries and fatalities from tractor overturns. Despite this knowledge, the use of seatbelts by farmers on ROPS tractors remains low. This study treats farm safety as a family issue and builds on the central role of parents as teachers and role models of farm safety for youth. This research study used a longitudinal, repeated-measures, randomized-control design in which youth 10-19 years of age were randomly assigned to either of two intervention groups (parent-led group and staff-led group) or the control group. Fathers in the parent-led group were less likely to operate ROPS tractors without a seatbelt compared with other groups. They were more likely to have communicated with youth about the importance of wearing seatbelts on ROPS tractors. Consequently, youth in the parent-led group were less likely to operate a ROPS tractor without a seatbelt than the control group at post-test. This randomized control trial supports the effectiveness of a home-based, father-led farm safety intervention as a promising strategy for reducing youth as well as father-unsafe behaviors (related to tractor seatbelts) on the farm. This intervention appealed to fathers' strong motivation to practice tractor safety for the sake of their youth. Involving fathers helped change both father as well as youth unsafe tractor-seatbelt behaviors. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Fuzzy Logic Based Control of the Lateral Stability of Tractor Semitrailer Vehicle

Directory of Open Access Journals (Sweden)

Xiujian Yang

2015-01-01

Full Text Available A novel control scheme is proposed to improve the yaw stability of a tractor semitrailer vehicle in critical situations. The control scheme is a two-layer structure consisting of an upper yaw moment controller and a lower brake force distributor. The tractor and the trailer are, respectively, stabilized by two independent fuzzy logic based yaw moment controllers. The controllers for the tractor and the trailer are, respectively, designed to track the reference yaw rate of the tractor and the hitch angle between the tractor and the trailer while considering the variation of the hitch angular rate at the same time. The corrective yaw moments determined by the corresponding upper fuzzy yaw moment controllers are realized by active wheel braking. The performance of the proposed control scheme is evaluated by simulations on a nonlinear vehicle model. The results demonstrate that the proposed control scheme is robust and effective in stabilizing the severe instabilities such as jackknife and trailer oscillation in the chosen simulation scenarios. It is believed that this control scheme is robust to the variation of road adhesion conditions.

Conformal superalgebras via tractor calculus

Science.gov (United States)

Lischewski, Andree

2015-01-01

We use the manifestly conformally invariant description of a Lorentzian conformal structure in terms of a parabolic Cartan geometry in order to introduce a superalgebra structure on the space of twistor spinors and normal conformal vector fields formulated in purely algebraic terms on parallel sections in tractor bundles. Via a fixed metric in the conformal class, one reproduces a conformal superalgebra structure that has been considered in the literature before. The tractor approach, however, makes clear that the failure of this object to be a Lie superalgebra in certain cases is due to purely algebraic identities on the spinor module and to special properties of the conformal holonomy representation. Moreover, it naturally generalizes to higher signatures. This yields new formulas for constructing new twistor spinors and higher order normal conformal Killing forms out of existing ones, generalizing the well-known spinorial Lie derivative. Moreover, we derive restrictions on the possible dimension of the space of twistor spinors in any metric signature.

Development and Evaluation of a Wide-Bed Former for Vegetable Cultivation in Controlled Tractor Traffic

Science.gov (United States)

Dixit, Anoop; Khurana, Rohinish; Verma, Aseem; Singh, Arshdeep; Manes, G. S.

2018-05-01

India is the second largest producer of vegetables in the world. For vegetable cultivation, a good seed bed preparation is an important task which involves 6-10 different operations. To tackle the issue of multiple operations, a prototype of tractor operated wide bed former was developed and evaluated. The machine comprises of a rotary tiller and a bed forming setup. It forms bed of 1000 mm top width which is suitable as per the track width of an average sized tractor in India. The height of the beds formed is 130 mm whereas the top and bottom width of channel formed on both sides of the bed is 330 and 40 mm respectively at soil moisture content of 12.5-16% (db). The forward speed of 2.75 km/h was observed to be suitable for proper bed formation. The average fuel consumption of the machine was 5.9 l/h. The average bulk density of soil before and after the bed formation was 1.46 and 1.63 g/cc respectively. Field capacity of the machine was found to be 0.31 ha/h. The machine resulted in 93.8% labour saving and 80.4% saving in cost of bed preparation as compared to conventional farmer practice. Overall performance of wide-bed former was found to be satisfactory.

The Tractor and Semitrailer Routing Considering Carbon Dioxide Emissions

Directory of Open Access Journals (Sweden)

Hongqi Li

2013-01-01

Full Text Available The incorporation of the minimization of carbon dioxide (CO2 emissions in the VRP is important to logistics companies. The paper deals with the tractor and semitrailer routing problem with full truckload between any two depots of the network; an integer programming model with the objective of minimizing CO2 emissions per ton-kilometer is proposed. A two-stage approach with the same core steps of the simulated annealing (SA in both stages is designed. The number of tractors is provided in the first stage and the CO2 emissions per ton-kilometer are then optimized in the second stage. Computational experiments on small-scale randomly generated instances supported the feasibility and validity of the heuristic algorithm. To a practical-scale problem, the SA algorithm can provide advice on the number of tractors, the routes, and the location of the central depot to realize CO2 emissions decrease.

Ergonomic assessment of drivers in MF285 and MF399 tractors during clutching using algometer

Directory of Open Access Journals (Sweden)

Hossein Fallahi

2016-03-01

The results showed that the clutching forces for MF285 and MF399 tractors were 340 N and 290 N, respectively. The knee angle of the drivers of the two tractors was statistically different at the one percent level of significance. The reduction of pain threshold after 30 and 60 s clutching and also 60 s rest after clutching in MF285 tractor, for all three muscles, were more than those of MF399 tractor. The impact of clutching on the average decreases of pain threshold, for all drivers and all clutching periods, during and after clutching, in the Quadratus lumborum muscle was more than the other two muscles, in both tractors. In order to reduce the clutching force for MF285 tractor some modifications is suggested. In this regard the force transfer joint between the pedal and the clutch release linkage may be replaced with one made of cast iron.

The influence of the tire inflation on pull properties of agriculture tractors

Directory of Open Access Journals (Sweden)

Jakub Katrenčík

2013-01-01

Full Text Available Agricultural tractors are robust and versatile machines, which must comply with the basic requirements of users under various conditions. The main requirements include economical and reliable operation and high performance. Fuel economy could be improved using multiple methods, for example a well trained operator, adequate farming conditions and optimal tire inflation. Tractor tires transmit engine power to the surface and as such they are crucial to tractor operation. In the first part of the field measurement, all tires were inflated to 180kPa, while in the second part of the field measurements the tire pressure was set to 75kPa in front tires and to 65 kPa in rear tires. The results of the field measurement of the John Deere 6920S tractor with different tire inflation shows that pull performance increased by 9.9% and wheel slip decreased by 9.7%.

Simulated stability tests of a small articulated tractor designed for extreme-sloped vineyards

Directory of Open Access Journals (Sweden)

F. Mazzetto

2013-09-01

Full Text Available A new reversible wheeled articulated tractor, designed to work in terraced vineyards trained with “pergola” system, common in mountain areas, is here described in its latest version and analysed through numerical simulations. This tractor has small dimensions, necessary to operate in that environment, and its central articulation has two rotational degrees-offreedom. The described features are surely strong design points but could be critical for vehicle’s stability, as affecting the supporting base’s dimensions and shape. Therefore, the tractor was equipped with a new automatic safety system: a self-locking articulation activated by contact sensors on the wheels. This device makes the vehicle partially-rigid in case of lateral unbalancing, so that rollover can happen only by overcoming the whole vehicle mass. A mathematical description of vehicle-ground interactions was implemented to deeply inquiry the tractor behaviour in different configurations (straight, angled at increasing values of ground slope; roll and pitch stability indexes were then computed and used for comparisons with conventional tractors. Thanks to the low centre-of-gravity, the resulting rollover angle with the vehicle in straight configuration is promising (43.8°→96%: it is greater than the maximum lateral (20°→36% and frontal (38°→78% slope angle ever recorded on terraced vineyards. The same rollover angle is lower when the tractor turns.

Evaluation of a Commercial Tractor Safety Monitoring System Using a Reverse Engineering Procedure.

Science.gov (United States)

Casazza, Camilla; Martelli, Roberta; Rondelli, Valda

2016-10-17

There is a high rate of work-related deaths in agriculture. In Italy, despite the obligato-ry installation of ROPS, fatal accidents involving tractors represent more than 40% of work-related deaths in agriculture. As death is often due to an overturn that the driver is incapable of predicting, driver assistance devices that can signal critical stability conditions have been studied and marketed to prevent accidents. These devices measure the working parameters of the tractor through sensors and elaborate the values using an algorithm that, taking into account the geometric characteristics of the tractor, pro-vides a risk index based on models elaborated on a theoretical basis. This research aimed to verify one of these stability indexes in the field, using a commercial driver as-sistance device to monitor five tractors on the University of Bologna experimental farm. The setup of the device involved determining the coordinates of the center of gravity of the tractor and the implement mounted on the tractor. The analysis of the stability in-dex, limited to events with a significant risk level, revealed a clear separation into two groups: events with high values of roll or pitch and low speeds, typical of a tractor when working, and events with low values of roll and pitch and high steering angle and forward speed, typical of travel on the road. The equation for calculating the critical speed when turning provided a significant contribution only for events that were typi-cal of travel rather than field work, suggesting a diversified calculation approach ac-cording to the work phase. Copyright© by the American Society of Agricultural Engineers.

Design and implementation of a GPS guidance system for agricultural tractors using augmented reality technology.

Science.gov (United States)

Santana-Fernández, Javier; Gómez-Gil, Jaime; del-Pozo-San-Cirilo, Laura

2010-01-01

Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor's position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR) technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems.

PARAMETER MATCHING OF INTERNAL COMBUSTION ENGINE AND ELECTROMECHANICAL POWER TRAIN OF WHEEL TRACTOR

Directory of Open Access Journals (Sweden)

A. V. Kliuchnikov

2012-01-01

Full Text Available The paper considers stepless electromechanical power train of a wheel tractor. Methodology for parameter matching of electromechanical transmission and internal combustion engine for their optimum performance as part of a power wheel tractor unit. 

Avaliação de alguns fatores ergonômicos nos tratores "Feller-buncher" e "Skidder" utilizados na colheita de madeira Evaluation of some ergonomic factors in Feller-buncher and Skidder tractors used in wood harvesting

Directory of Open Access Journals (Sweden)

Julião Soares de Souza Lima

2005-04-01

Full Text Available Este trabalho foi realizado com tratores florestais utilizados em um sistema mecanizado de colheita de madeira em povoamento de eucalipto, tendo como objetivo avaliar quantiqualitativamente as dimensões de acesso, assento, comandos, campo visual, condições térmicas e vibração no posto dos operadores. O acesso ao posto do operador no trator "Feller-buncher" apresentou um grau de dificuldade, sendo classificado, na avaliação qualitativa, como médio e, no "Skidder", como bom. A abertura das portas de acesso apresenta ângulo menor que 90º, dificultando, assim, a entrada e saída do operador. O posto do operador do trator "Feller-buncher" foi classificado como médio na avaliação qualitativa, em virtude de o espaço livre da plataforma de apoio ser de 30% da área total e, no "Skidder", de 55% da área total, sendo classificado como bom. O campo visual frontal do "Feller-buncher", mesmo tendo uma área do pára-brisa maior, é limitado pela presença do cabeçote, tanto em operações diurnas quanto noturnas, sendo, portanto, inferior ao do "Skidder".This work was carried out in forest tractors used in a mechanized system for wood harvesting in a stand of eucalyptus, to evaluate quanti-qualitatively the dimensions of access, seat, commands, field view, thermal conditions and vibration in the operators' station. The access to the operator's station in the Feller-Buncher tractor presented a degree of difficulty classified in the qualitative evaluation as average and the Skidder as good. The opening of the access doors presents an angle smaller than 90º, thus rendering the entrance and exit of the operator more difficult. The operators station of the Feller-Buncher tractor was classified as medium in the qualitative evaluation, due to the free space of the support platform being 30% of the total area, and in the Skidder 55%, therefore being classified as good. The front field view in Feller-Buncher, even having a wider windscreen area, is

High voltage electrification of tractor and agricultural machinery – A review

International Nuclear Information System (INIS)

Moreda, G.P.; Muñoz-García, M.A.; Barreiro, P.

2016-01-01

Highlights: • CO_2 emission reduction calls for energy-efficient mobile work machines. • Energy recovery could be possible in some agricultural machinery operations. • Owning and operating costs of electrified tractor-implement pairs should be analyzed. • Plug-in hybrid electric tractors running along tramlines make sense. • Electrification allows for precise speed control, noise reduction and flexible design. - Abstract: Reduction of both pollutant emissions and fossil fuel dependency is an objective of energy policies worldwide. In many countries, governments promote the use of efficient vehicles like the hybrid electric vehicle. Incorporation of electric drives in tractor and agricultural machinery presents advantages in terms of increased energy efficiency and expanded functionalities. Higher efficiency means reduction in fuel consumption and subsequent decrease in CO_2 emission. New functionalities improve work quality and increase operator comfort. Tractor electrification takes advantage of decoupling loads and drives from the engine, which allows operating the latter at its highest efficiency point. Major advantages of machinery electrification are torque and speed control, noise reduction, and a more flexible design. In this paper, a review of the state-of-the-art of agricultural machinery high voltage electrification is presented.

Evaluation Of Onion Production On Sandy Soils By Use Of Reduced Tillage And Controlled Traffic Farming With Wide Span Tractors

Directory of Open Access Journals (Sweden)

Pedersen Hans Henrik

2015-09-01

Full Text Available Growing of vegetables is often characterised by intensive field traffic and use of heavy machines. By implementing controlled traffic farming (CTF, compaction of the growth zone can be avoided. An experiment was established in an onion field on a coarse sandy loam. Treatments were applied in the field that for five years had been managed by seasonal CTF (SCTF, where harvest is performed by random traffic due to lack of suitable harvest machines. The main treatment was compaction with a fully loaded potato harvester. The split treatment in the crossed split plot design was mechanical loosening. Bulk density, macroporosity, penetration resistance, water retention characteristics and yield were measured. Mechanical loosening caused improvements in the physical soil measurements and more roots were found in the upper soil layers. The highest yield was however found in the CTF simulation plots (19% higher than in the SCTF simulated plots. Using wide span tractors as a harvest platform will enable CTF in vegetable production. Avoidance of compaction will enable reduced tillage intensity and productivity can be improved both through higher yield of the area that is cropped and by a larger percentage of fields can be cropped area as less area will be needed for tracks.

Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch

Directory of Open Access Journals (Sweden)

Daekyung Noh

2017-04-01

Full Text Available Owing to the high power requirements of tractors, their low-power transmission gears often experience durability problems such as burning of the clutch. The operation of tractors under high load conditions also causes clutch slip, with the consequent longer operation duration exacerbating the burning of the friction plate. Solving this problem requires effective lubricant distribution. This was achieved in the present study by the development of an analysis model for predicting the lubricant flow rate. The reliability of the model was verified by comparing its predictions for various operation conditions with experimental measurements. Using the model, it was determined that effective distribution of the lubricant could be achieved without significant modification of the system, by only adjusting the gaps between the clutch piston and the housing, and between the separation plates and the case. Keywords: Mechanical engineering

Dynamic-energetic balance of agricultural tractors: active systems for the measurement of the power requirements in static tests and under field conditions

Directory of Open Access Journals (Sweden)

Daniele Pochi

2013-09-01

Full Text Available Modern tractors are characterized by the introduction of devices designed to increase the operative performances of the machines, such as systems for monitoring and controlling various functions (through a massive use of electronics and hydraulics, or deputed to improve the comfort of the driver (paying more attention to ergonomics, air-conditioning, noise and vibration. Such devices need energy to be operated, affecting the energetic balance of the tractor. In this context, the availability of suitable methodologies and instrumental systems could be useful to provide objective, accurate and reliable measurements of the performances of the tractors under different conditions, also considering the power requirements from ancillary services and/or simulating the coupling with operating machines. The tests on the performances of tractors are now made using different methods, including the trial codes issued by the OECD Codes. Beyond their undoubted validity, they fix standard test conditions that often do not adequately represent the operative reality, so that, much remains to investigate on the actual performances provided by the tractors. From this point of view and with reference to fixed point tests, a test bench was developed for the measurement of the power required by various devices, such as transmission and air conditioning. It was used in experimental tests on a tracked tractor and on a wheeled tractor, aimed at validating the test device, measuring the power absorption related to the rotational speed of the organs of propulsion and to the characteristics curves, in order to quantify the power drawn by the transmission and by the air conditioning and assess the residual power for other tractor functions. As to field conditions, a study is being conducted at CRA-ING, within the project PTO (Mi.P.A.A.F., to develop a mobile test bench aimed at evaluating the power required by different operations, such as self displacement, traction, use of

SmartWay Mark Signature Page: Tractors & Trailers

Science.gov (United States)

This SmartWay agreement is for companies and organizations who wish to comply with the SmartWay Graphic Standards and Usage Guide guidelines and requirements for using the SmartWay logos on SmartWay designated Tractors and Trailers.

Process Approach for Modeling of Machine and Tractor Fleet Structure

Science.gov (United States)

Dokin, B. D.; Aletdinova, A. A.; Kravchenko, M. S.; Tsybina, Y. S.

2018-05-01

The existing software complexes on modelling of the machine and tractor fleet structure are mostly aimed at solving the task of optimization. However, the creators, choosing only one optimization criterion and incorporating it in their software, provide grounds on why it is the best without giving a decision maker the opportunity to choose it for their enterprise. To analyze “bottlenecks” of machine and tractor fleet modelling, the authors of this article created a process model, in which they included adjustment to the plan of using machinery based on searching through alternative technologies. As a result, the following recommendations for software complex development have been worked out: the introduction of a database of alternative technologies; the possibility for a user to change the timing of the operations even beyond the allowable limits and in that case the calculation of the incurred loss; the possibility to rule out the solution of an optimization task, and if there is a necessity in it - the possibility to choose an optimization criterion; introducing graphical display of an annual complex of works, which could be enough for the development and adjustment of a business strategy.

Ergonomic assessment of drivers in MF285 and MF399 tractors during clutching using algometer

OpenAIRE

Hossein Fallahi; Mohammad Hossein Abbaspour-Fard; Amin Azhari; Mehdi Khojastehpour; Amin Nikkhah

2016-01-01

Tractor as one of the most widely used agricultural machinery should be considered from different aspects. The frequent application of clutch and brake pedals and also the steering wheel within farms, along with the unfavorable working conditions, cause negative effects on the occupational health of the tractor drivers. Thus, in this research, the imposed forces on three engaged muscles including: Gastrocnemius, Trapezius and Quadrate’s lumborum of the tractor drivers during clutching have be...

Non-Diffractive Tractor Beams

DEFF Research Database (Denmark)

Novitsky, Andrey; Gao, Dongliang; Gorlach, Alexey A.

2017-01-01

Pulling optical force discovered recently in the theory and experiment has drawn great attention owing to its counterintuitive nature and promising applications. Pulling force originates from the enhanced forward light scattering that in accordance with the momentum conservation conveys light...... demonstrate how to ease the conditions required in experiment for realization of the optical tractor beams using the cylindrical objects. We pay a particular attention to the case of the pulling optical force due to the interaction of magnetic dipole and quadrupole moments....

Risk exposure to vibration and noise in the use of agricultural track-laying tractors

Directory of Open Access Journals (Sweden)

Mariangela Vallone

2016-09-01

Full Text Available Human exposure to mechanical vibration may represent a significant risk factor for exposed workers in the agricultural sector. Also, noise in agriculture is one of the risk factors to be taken into account in the evaluation of workers’ health and safety. One of the major sources of discomfort for the workers operating a tractors is the noise to which they are exposed during work. The aim of this study was to evaluate the risk of exposure to whole-body vibration for the operator driving track-laying tractors in vineyard orchard and the noise level. The experimental tests were performed with six different track-laying tractors coupled with the same rototilling machine. The results showed that the vibration values of track-laying tractors coupled to rototilling machine, referred to the 8-hour working day, were always higher than 0.5 m s -2 , the daily exposure action value established by Directive 2002/44/EC of the European Parliament. The daily noise exposure levels always exceeded the exposure limit value of 87 dB(A established by Directive 2003/10/EC of the European Parliament. The ANOVA repeated measures model showed that the factor ‘site’, namely, the soil characteristics, did not influence the vibration level on the X and Y-axes of the tractors measured, regardless of their age. In the Z-axis, the vibration level was enhanced as the soil structure increased. As tractor age increased, the influence of soil characteristics was less important. In term of the age of the tractor and the number of hours worked, it was possible to identify three risk classes, which were up to 3,000 hours worked and offered a low risk; from 3,000 – 6,000 hours worked with a medium risk, and over 6,000 hours with a high risk level.

Risk exposure to vibration and noise in the use of agricultural track-laying tractors.

Science.gov (United States)

Vallone, Mariangela; Bono, Filippa; Quendler, Elisabeth; Febo, Pierluigi; Catania, Pietro

2016-12-23

Human exposure to mechanical vibration may represent a significant risk factor for exposed workers in the agricultural sector. Also, noise in agriculture is one of the risk factors to be taken into account in the evaluation of workers' health and safety. One of the major sources of discomfort for the workers operating a tractors is the noise to which they are exposed during work. The aim of this study was to evaluate the risk of exposure to whole-body vibration for the operator driving track-laying tractors in vineyard orchard and the noise level. The experimental tests were performed with six different track-laying tractors coupled with the same rototilling machine. The results showed that the vibration values of track-laying tractors coupled to rototilling machine, referred to the 8-hour working day, were always higher than 0.5 m s -2 , the daily exposure action value established by Directive 2002/44/EC of the European Parliament. The daily noise exposure levels always exceeded the exposure limit value of 87 dB(A) established by Directive 2003/10/EC of the European Parliament. The ANOVA repeated measures model showed that the factor 'site', namely, the soil characteristics, did not influence the vibration level on the X and Y-axes of the tractors measured, regardless of their age. In the Z-axis, the vibration level was enhanced as the soil structure increased. As tractor age increased, the influence of soil characteristics was less important. In term of the age of the tractor and the number of hours worked, it was possible to identify three risk classes, which were up to 3,000 hours worked and offered a low risk; from 3,000 - 6,000 hours worked with a medium risk, and over 6,000 hours with a high risk level.

IMPACT OF THE REPEATED TRACTOR PASSES ON SOME PHYSICAL PROPERTIES OF SILTY LOAM SOIL

Directory of Open Access Journals (Sweden)

Dubravko Filipović

2011-12-01

Full Text Available The aim of this paper was to quantify soil compaction induced by tractor traffic on untilled wet silty loam soil (Mollic Fluvisol. Changes in penetration resistance, bulk density and total porosity were measured for detecting the soil compaction. Treatments include ten passes of a four-wheel drive tractor with the engine power of 54.0 kW and weight of 3560 kg (1580 kg on the front axle and 1980 kg on the rear axle, 2.41 m distance between axles. The tyres on the tractor were cross-ply, front 11.2-24 and rear 16.9-30, with the inflation pressure of 160 kPa and 100 kPa, respectively. The speed of tractor during passes over experimental plots was 5.0 km h-1. In comparison to control, each tractor pass induced an increase in soil penetration resistance at all depths, and the average increment ratios, determined as the average of all layers, were 9.8, 18.5 and 26.1% after one, five and ten passes, respectively. The bulk density also increased with number of tractor passes, but with less percentage increasing. The increment ratios comparison to the control were 3.6, 9.5 and 12.9% after one, five and ten passes, respectively. The total porosity decreased with the number of passes, and the decrement ratios were 4.5, 16.5 and 20.8% after one, five and ten passes, respectively.

A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

Science.gov (United States)

Kunze, Joel P.

1991-01-01

Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

Enhanced Gravity Tractor Technique for Planetary Defense

Science.gov (United States)

Mazanek, Daniel D.; Reeves, David M.; Hopkins, Joshua B.; Wade, Darren W.; Tantardini, Marco; Shen, Haijun

2015-01-01

Given sufficient warning time, Earth-impacting asteroids and comets can be deflected with a variety of different "slow push/pull" techniques. The gravity tractor is one technique that uses the gravitational attraction of a rendezvous spacecraft to the impactor and a low-thrust, high-efficiency propulsion system to provide a gradual velocity change and alter its trajectory. An innovation to this technique, known as the Enhanced Gravity Tractor (EGT), uses mass collected in-situ to augment the mass of the spacecraft, thereby greatly increasing the gravitational force between the objects. The collected material can be a single boulder, multiple boulders, regolith or a combination of different sources. The collected mass would likely range from tens to hundreds of metric tons depending on the size of the impactor and warning time available. Depending on the propulsion system's capability and the mass collected, the EGT approach can reduce the deflection times by a factor of 10 to 50 or more, thus reducing the deflection times of several decades to years or less and overcoming the main criticism of the traditional gravity tractor approach. Additionally, multiple spacecraft can orbit the target in formation to provide the necessary velocity change and further reduce the time needed by the EGT technique to divert hazardous asteroids and comets. The robotic segment of NASA's Asteroid Redirect Mission (ARM) will collect a multi-ton boulder from the surface of a large Near-Earth Asteroid (NEA) and will provide the first ever demonstration of the EGT technique and validate one method of collecting in-situ mass on an asteroid of hazardous size.

Design and Implementation of a GPS Guidance System for Agricultural Tractors Using Augmented Reality Technology

Directory of Open Access Journals (Sweden)

Laura del-Pozo-San-Cirilo

2010-11-01

Full Text Available Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor’s position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems.

Bifurcation of Lane Change and Control on Highway for Tractor-Semitrailer under Rainy Weather

Directory of Open Access Journals (Sweden)

Tao Peng

2017-01-01

Full Text Available A new method is proposed for analyzing the nonlinear dynamics and stability in lane changes on highways for tractor-semitrailer under rainy weather. Unlike most of the literature associated with a simulated linear dynamic model for tractor-semitrailers steady steering on dry road, a verified 5DOF mechanical model with nonlinear tire based on vehicle test was used in the lane change simulation on low adhesion coefficient road. According to Jacobian matrix eigenvalues of the vehicle model, bifurcations of steady steering and sinusoidal steering on highways under rainy weather were investigated using a numerical method. Furthermore, based on feedback linearization theory, taking the tractor yaw rate and joint angle as control objects, a feedback linearization controller combined with AFS and DYC was established. The numerical simulation results reveal that Hopf bifurcations are identified in steady and sinusoidal steering conditions, which translate into an oscillatory behavior leading to instability. And simulations of urgent step and single-lane change in high velocity show that the designed controller has good effects on eliminating bifurcations and improving lateral stability of tractor-semitrailer, during lane changing on highway under rainy weather. It is a valuable reference for safety design of tractor-semitrailers to improve the traffic safety with driver-vehicle-road closed-loop system.

A Kalman Filter Implementation for Precision Improvement in Low-Cost GPS Positioning of Tractors

Science.gov (United States)

Gomez-Gil, Jaime; Ruiz-Gonzalez, Ruben; Alonso-Garcia, Sergio; Gomez-Gil, Francisco Javier

2013-01-01

Low-cost GPS receivers provide geodetic positioning information using the NMEA protocol, usually with eight digits for latitude and nine digits for longitude. When these geodetic coordinates are converted into Cartesian coordinates, the positions fit in a quantization grid of some decimeters in size, the dimensions of which vary depending on the point of the terrestrial surface. The aim of this study is to reduce the quantization errors of some low-cost GPS receivers by using a Kalman filter. Kinematic tractor model equations were employed to particularize the filter, which was tuned by applying Monte Carlo techniques to eighteen straight trajectories, to select the covariance matrices that produced the lowest Root Mean Square Error in these trajectories. Filter performance was tested by using straight tractor paths, which were either simulated or real trajectories acquired by a GPS receiver. The results show that the filter can reduce the quantization error in distance by around 43%. Moreover, it reduces the standard deviation of the heading by 75%. Data suggest that the proposed filter can satisfactorily preprocess the low-cost GPS receiver data when used in an assistance guidance GPS system for tractors. It could also be useful to smooth tractor GPS trajectories that are sharpened when the tractor moves over rough terrain. PMID:24217355

ENHANCEMENT OF DURABILITY OF TRACTOR SUSPENSION AXLES

Directory of Open Access Journals (Sweden)

I. Doshchechkina

2017-12-01

Full Text Available The ‘soft’ nitriding of the suspension axle surface of the T150K tractor at the depth of 0.08 mm enables us to enhance its constructive strength, to increase its service life by 25 % and have a considerable economic effect.

Evaluation of Massey Ferguson Model 165 Tractor Drivers exposed to whole-body vibration

Directory of Open Access Journals (Sweden)

P. Nassiri

2013-12-01

Conclusion: This study shows that the need to provide intervention , controlling and managing measures to eliminate or reduce exposure to whole body vibration among tractor drivers its necessary. And, preventing main disorder Including musculoskeletal disorders, discomfort and early fatigue is of circular importance. More studies are also necessary to identify the sources of vibration among various of tractors.

A mission planner for an autonomous tractor

DEFF Research Database (Denmark)

Bochtis, Dionysis; Vougioukas, S.G.; Griepentrog, Hans W.

2009-01-01

. Using the tree hierarchy of the mission file, several actions are determined, including the sequence of points the tractor has to follow, the type of motion between successive points (e.g.,straight motion or maneuvering), the type of predefined turning routine used in maneuvering, and the actions...

INTEGRAL ASSESSMENT OF EFFICIENCY OF A FLEET OF AGRICULTURAL MACHINERY AND TRACTORS

Directory of Open Access Journals (Sweden)

V. M. Korotchenya

2015-01-01

Full Text Available An indicator for an integral assessment of efficiency of a fleet of agricultural machinery and tractors is proposed. Its calculating consists in multiplying partial efficiencies together: technical and price efficiency of agricultural production, and eco-efficiency of a fleet of agricultural machinery and tractors. Using an axiomatic method, the concept of efficiency of fleet was studied within broader category of productivity and in wider scales - within agriculture. The most general and obvious statements according to which efficiency of machine and tractor fleet is considered as indirectly settlement size counted proceeding from efficiency of agricultural production, were accepted as axioms. In general, efficiency is a ratio between productivity of an object in question and that of the theoretical ideal or an object with maximum productivity efficiency of which is accepted equal to unity or 100%. Technical efficiency of agricultural production characterizes the ability of an agricultural sector to produce the technically maximum output of agricultural produce obtained from the available resources (land, labor, machines, etc.. Price efficiency evaluates the ability of an agricultural sector to produce output of agricultural produce with regard to employing the optimal mix of resources given their prices. Because the theoretical ideal does not exist, efficiency of an agricultural sector, e.g. in Russia and of its fleet of agricultural machinery and tractors, is measured against agriculture of another country with maximum productivity efficiency of which is accepted as equal to unity or 100 percent. The calculation can be made on the basis of the Data Envelopment Analysis method. It is possible to calculate price and economic efficiency of Russian agriculture (fleet of agricultural machinery and tractors due to use its domestic prices.

Ranking provinces based on development scale in agriculture sector using taxonomy technique

Directory of Open Access Journals (Sweden)

Shahram Rostampour

2012-08-01

Full Text Available The purpose of this paper is to determine comparative ranking of agricultural development in different provinces of Iran using taxonomy technique. The independent variables are amount of annual rainfall amount, the number of permanent rivers, the width of pastures and forest, cultivated level of agricultural harvests and garden harvests, number of beehives, the number of fish farming ranches, the number of tractors and combines, the number of cooperative production societies, the number of industrial cattle breeding and aviculture. The results indicate that the maximum development coefficient value is associated with Razavi Khorasan province followed by Mazandaran, East Azarbayjan while the minimum ranking value belongs to Bushehr province.

Development of energy harvesting modules based on piezoceramics

Energy Technology Data Exchange (ETDEWEB)

Kulkarni, V.; Waechter, D.; Ben Mrad, R. [Toronto Univ., ON (Canada). Dept. of Mechanical and Industrial Engineering; El-Diraby, T. [Toronto Univ., ON (Canada). Dept. of Civil Engineering; Somayajula, N.; Nemana, S.; Prasad, E. [Sensor Technology Ltd., Collingwood, ON (Canada)

2009-07-01

Self-powered devices can overcome the current reliance and limitations of finite-supply batteries. They have potential in developing next-generation wireless electronics for a wide variety of applications such as health monitoring in civil infrastructure, micro-electro-mechanical system (MEMS) sensor arrays for automotive and aerospace applications, and sensor arrays for environmental control. These energy harvesting devices capture the ambient energy surrounding a system and convert it into usable electrical energy. A common method of power harvesting is to convert ambient mechanical vibrations into electricity through the use of piezoelectric materials such as piezoceramics (PZT). This paper highlighted some of the recent developments in piezoceramic energy harvesting along with proposed circuits that can improve the performance of energy harvesters. The successful storage and use of energy generated by various harvesting devices requires the use of specific circuitry to optimize the output from the devices. Energy harvesting circuitry was characterized in terms of energy storage; AC/DC converter; DC-DC step down converter; and non-linear voltage processing. The patent activity and applications on piezoceramic energy harvesting was also summarized. It was concluded that despite significant research, piezoceramic energy harvesting remains an emerging technology that requires considerable advancement before it can be commercially viable. The power generated by current piezoelectric harvesters is too low for many applications. Alternative piezoceramic materials and their characteristics must be investigated. 31 refs., 1 tab., 4 figs.

Implementation of Virtual Reality in the Conceptual Design of a Tractor Trailer

OpenAIRE

Arunesh Chandra; Pankaj Chandna

2014-01-01

Virtual reality (VR) is a rapidly emerging computer interface that attempts to immerse the user completely within an experimental recreation; thereby, greatly enhancing the overall impact and providing a much more intuitive link between the computer and the human participants. The main objective of this study is to design tractor trailer capable of meeting the customers’ requirements and suitable for rough conditions to be used in combination with a farm tractor in India....

System automated for evaluation of the consuption of biodiesel in agricola tractor

OpenAIRE

Ivair Marchetti

2006-01-01

This work had as objective the assembly of a system automated for evaluation of the consumption of fuel in agricultural tractors, in the utilization of biodiesel in diverse mixtures diesel/biodiesel for the accomplishment of testing, without the utilization of the tank of the tractor. The system was projected and mounted on the UNIOESTE Cascavel - PR in partnership with the UTFPR Medianeira â PR. The system is composed for two auxiliary tanks confectioned in stainless steel ...

Artificial neural network applying for justification of tractors undercarriages parameters

Directory of Open Access Journals (Sweden)

V. A. Kuz’Min

2017-01-01

Full Text Available One of the most important properties that determine undercarriage layout on design stage is the soil compaction effect. Existing domestic standards of undercarriages impact to soil do not meet modern agricultural requirements completely. The authors justify the need for analysis of traction and transportation machines travel systems and recommendations for these parameters applied to machines that are on design or modernization stage. The database of crawler agricultural tractors particularly in such parameters as traction class and basic operational weight, engine power rating, average ground pressure, square of track basic branch surface area was modeled. Meanwhile the considered machines were divided into two groups by producing countries: Europe/North America and Russian Federation/CIS. The main graphical dependences for every group of machines are plotted, and the conforming analytical dependences within the ranges with greatest concentration of machines are generated. To make the procedure of obtaining parameters of the soil panning by tractors easier it is expedient to use the program tool - artificial neural network (or perceptron. It is necessary to apply to the solution of this task multilayered perceptron - neutron network of direct distribution of signals (without feedback. To carry out the analysis of parameters of running systems taking into account parameters of the soil panning by them and to recommend the choice of these parameters for newly created machines. The program code of artificial neural network is developed. On the basis of the created base of tractors the artificial neural network was created and tested. Accumulated error was not more than 5 percent. These data indicate the results accuracy and tool reliability. It is possible by operating initial design-data base and using the designed artificial neural network to define missing parameters.

Performance of an agricultural tractor in no tillage as a function of displacement speed and the seeders' tire inflation pressure

Energy Technology Data Exchange (ETDEWEB)

Furlani, Carlos Eduardo Angeli; Cortez, Jorge Wilson; Silva, Rouverson Pereira da; Grotta, Danilo Cesar Checchio; Toledo, Anderson de [Universidade Estadual Paulista (UNESP), Jaboticabal, SP (Brazil)], E-mail: furlani@fcav.unesp.br

2008-07-01

The performance of an agricultural tractor under field conditions results from the tire wheel interaction together with its displacement speed. This work was developed to assess the performance of an agricultural tractor under the (75, 70, and 60 psi) tire inflation pressure conditions of a seeder and in two different gears providing speeds of 3.0 and 6.0 km h{sup -1}. The experiment took place at Sao Paulo State University (UNESP), at the Jaboticabal Campus, and was conducted by Laboratory of Machines and Agricultural Mechanization (LAMMA) at the Department of Rural Engineering. The delineation used was entirely randomized in a 2-factor factorial scheme (3 x 2) with 4 repetitions. We also observed that fuel consumption was influenced only by the tractor gear. Energy consumption was greater as speed increased, caused by gear shifting. The displacement speed was greater for the 75-psi pressure due to a lesser slippage in the seeder when under this pressure. Tractor slippage and initial stand did not change with the tested factors. (author)

Comparison between ISO 5008 and field whole body vibration tractor values

Directory of Open Access Journals (Sweden)

Roberto Deboli

2012-09-01

Full Text Available The exposure to whole body vibration (WBV of tractor drivers during field operations is a problem that has never been solved. WBV values are quite difficult to predict because of the high number of variables, such as mass and geometry of the vehicle, forward speed, tire pressure, type of ground, operation cycle, and environmental factors. The use of an artificial track is useful to limit the variability of some field parameters, such as the path followed, fluctuations in speed, weather, temperature, and soil conditions. For comparative purposes, these variables need to be maintained as constant as possible in order to obtain the most useful data. An analysis of the literature provoked the question: Is there a lower forward speed on artificial track that can generate the same vibration response on tractors working in the same field? In this paper, we analyze the available literature and provide some WBV values and frequency analysis of acceleration measured on agricultural tractors traveling on an artificial test track and on different types of ground.

A New Skid Trail Pattern Design for Farm Tractors Using Linear Programing and Geographical Information Systems

Directory of Open Access Journals (Sweden)

Selcuk Gumus

2016-12-01

Full Text Available Farm tractor skidding is one of the common methods of timber extraction in Turkey. However, the absence of an optimal skidding plan covering the entire production area can result in time loss and negative environmental impacts. In this study, the timber extraction by farm tractors was analyzed, and a new skid trail pattern design was developed using Linear Programming (LP and Geographical Information Systems (GIS. First, a sample skidding operation was evaluated with a time study, and an optimum skidding model was generated with LP. Then, the new skidding pattern was developed by an optimum skidding model and GIS analysis. At the end of the study, the developed new skid trail pattern was implemented in the study area and tested by running a time study. Using the newly developed “Direct Skid Trail Pattern (DSTP” model, a 16.84% increase in working time performance was observed when the products were extracted by farm tractors compared to the existing practices. On the other hand, the average soil compaction value measured in the study area at depths of 0–5 cm and 5–10 cm was found to be greater in the sample area skid trails than in the control points. The average density of the skid trails was 281 m/ha, while it decreased to 187 m/ha by using the developed pattern. It was also found that 44,829 ton/ha of soil losses were prevented by using the DSTP model; therefore, environmental damages were decreased.

Pulsed Nonlinear Automatic Control System for Guidance of a Caterpillar Tractor Unit in Vineyards

Directory of Open Access Journals (Sweden)

Sit M.L.

2018-04-01

Full Text Available The automatic guidance systems of tractors for soil cultivation in vineyards have attracted the attention of researchers since the second half of the twentieth century. The purpose of this paper is to investigate the driving quality of an automatic guidance system (AGS for a caterpillar tractor unit (CTU consisting of a crawler tractor and a vineyard plow and having the orientation system by grapes stamps. Compared with the known works (in which GPS, LIDAR, and video cameras are used for orientation, the proposed system is the least expensive. For this, the existence of stability of the AGS as a whole in the range of operating speeds of the unit was proved. The dynamic model of the vineyard plow was verified on a three-point hitching system of the tractor, field tests of the AGS were carried out, which confirmed the results of theoretical studies, and suggested directions for further research. The shape and parameters of the modulation characteristic (MC of the pulse-width modulator (PWM of the AGS control system, the rational values of the hydraulic drive speeds of the sequential control mechanism of the clutch of the turn and the crawler tractor belt brake, were established, depending on the slope angle and the speed of the unit, ensuring agrotechnical requirements for driving. New solutions, in comparison with the known ones, are the ways of forming the MC of PWM using a new design probe and the associated driver MC of PWM.

A SURVEY OF FARM TRACTOR MANAGEMENT IN ZAMFARA STATE

African Journals Online (AJOL)

2013-03-01

Mar 1, 2013 ... farm tractor, maintenance, management, mechanization, survey study. 1. Introduction ... demand for agricultural operations, there is an ever .... 3rd Ed., AVI Publishing. Company, Inc., Westport, Connecticut, 1978. 8. Apollos ...

Operational comparison of two types of tractor sprayers (microner and boom-type against wheat crop weeds

Directory of Open Access Journals (Sweden)

M Hamid

2015-09-01

Full Text Available Introduction: Nowadays, the tractor mounted boom sprayer is used in many agricultural fields. These sprayers have many advantages compared to other sprayers, but in Iran, their field efficiency is much lower than that of the developed countries, because the tank volume and consumption of pesticides per hectare is often so highthat spraying per hectare takesa long time for handling the solutions and transporting the sprayers. Also spray droplet size is ordinarily high and its distribution is unknot uniform. So, often spraying and dropping top parts of plants on the earth is inevitable. According to studies carried out in the country during the years 2005-2008 in the agricultural research centers in several provinces such as Khuzestan, four types of sprayers including tractor mounted sprayer, atomizer, microner, and electrostatic atomizer were studied and some of the results obtained include the following. From the point of view of percentage of crash crop, tractor mounted sprayer has the highest percentage, but microner sprayer had the lowest. From the point of view of the solution of consumption amount and spraying cost per hectare, the operation of the tractor mounted sprayer and electrostatic sprayer had the highest and the lowest ranks, respectively. Atomizer sprayer had the highest effect on the percentage amount of weed control, but it requires a high amount of water consumption, high drift and low operation (Safari and Lovaimi, 2010. Materials and Methods: The experiment was carried out during 2012-2013 in the field of agricultural research located in the Mollasani city located 20 km near Ahvaz. In this study, tractor mounted spinning disk sprayer (mounted microner sprayer was evaluated in comparison with conventional boom sprayer on weeds control. The treatments included medium (3500 rpm and low (2000 rpm speed rotation disk sprayer and two types of nozzle in conventional boom sprayer. One of them was an Italian tee jet nozzle and the

Towing Asteroids with Gravity Tractors Enhanced by Tethers and Solar Sails

Science.gov (United States)

Shen, Haijun; Roithmayr, Carlos M.

2015-01-01

Material collected from an asteroid's surface can be used to increase gravitational attraction between the asteroid and a Gravity Tractor (GT); the spacecraft therefore operates more effectively and is referred to as an Enhanced Gravity Tractor (EGT). The use of tethers and solar sails to further improve effectiveness and simplify operations is investigated. By employing a tether, the asteroidal material can be placed close to the asteroid while the spacecraft is stationed farther away, resulting in a better safety margin and improved thruster efficiency. A solar sail on a spacecraft can naturally provide radial offset and inter-spacecraft separation required for multiple EGTs.

Effect of using GPS autosteer guidance systems on the eye-glance behavior and posture of tractor operators.

Science.gov (United States)

Karimi, D; Henry, J; Mann, D D

2012-10-01

Tractor operators are prone to neck and back discomfort and disorders. It is well known that awkward posture is a major contributor to this problem. Previous studies have investigated the prevalence of awkward posture and the resulting discomfort and disorders among tractor operators. They have also suggested various ways to mitigate this problem. With the introduction of new autosteer guidance systems, the tractor operator is relieved from the task of steering the tractor for most of the time during field work. Therefore, it is expected that the operator's posture will change. The goal of this study was to investigate the changes in the eye-glance behavior and posture of tractor operators as a result of using autosteer guidance systems. An eye-tracking system and a camcorder were used to record the eye-glance behavior and posture of 13 tractor operators as they performed seeding operations. The experiment with each operator consisted of two sessions. In one session, the operator used an autosteer system, while in the other session the operator steered the tractor manually. Analysis of the data showed that the eye-glance behavior and posture of the operators were significantly different between the autosteer and manual steering sessions. With the autosteer system, the operators spent less time in an awkward posture, and they changed their posture less frequently. However, even with the autosteer system, the operators spent 1/3 of their time in an awkward posture. Subjective feedback from the operators indicated that more than half of them experienced back or neck/shoulder discomfort during or after seeding. It is essential that the recommendations of the previous studies, such as using large rear-view mirrors or a rotating tractor seat, be evaluated when the operator is using an autosteer system. Other tools, such as video cameras that show the attached equipment, should also be tested to evaluate their effectiveness in reducing the operator's exposure to awkward

Emission and operating performance of a biomethane tractor with dual fuel engine

International Nuclear Information System (INIS)

Mautner, Sebastian; Emberger, Peter; Thuneke, Klaus; Remmele, Edgar

2016-01-01

The use of biomethane as fuel for agricultural machinery with dual fuel technology is contributing to climate protection and ensures safe fuel supply. So far, hardly any documented operational experiences are known. The aim of the project, funded by the Bavarian Ministry of Economic Affairs and Media, Energy and Technology, was to investigate practicability for daily use and the emission behaviour of a Valtra N101 prototype tractor (exhaust stage IIIA). The retrofitted dual-fuel technology of the former conventional diesel tractor simultaneously uses biomethane or natural gas and diesel as ignition fuel. During the field test over 590 working hours, the tractor showed overall high reliability. On average the operating range in dual-fuel mode with one complete filling of the gas tanks was about 11.5 hours. On the tractor test bench a significant improvement of the exhaust emissions could be observed, since the gas ECU had been optimized and changed by the manufacturer. For dual-fuel operation, nitrogen oxides (NO x ) are lower, whereas carbon monoxide (CO), hydrocarbons (HC) and particulate matter emissions (PM) are higher compared to solely diesel operation. In particular, HC emissions exceed the proposed limiting value, submitted by the European Commission. This is due to incomplete gas combustion and insufficient conversion by the exhaust after-treatment-system (methane slip). A big potential for optimization is expected by adjusting the operating point-specific gasdiesel ratio and improving the exhaust gas aftertreatment system.

Sex differences in principal farm operators' tractor driving safety beliefs and behaviors.

Science.gov (United States)

Cole, H P; Westneat, S C; Browning, S R; Piercy, L R; Struttmann, T

2000-01-01

To examine the widely accepted hypothesis that farm women are more concerned with safety issues and behaviors than their male counterparts are. A telephone survey was administered to a random sample of Kentucky principal farm operators, 90 of whom were women. Participants were questioned about their tractor safety beliefs and practices. No significant sex differences in tractor safety perceptions and behavior were observed. Socialization of women to the role of principal farm operator may override their typically greater sensitivity to safety issues, an important consideration when designing safety campaigns for this population.

Design, Construction and Evaluation of an Interchangeable Digital System to Measure Slip and Ground Speed of Existing 2WD Tractors in Iran

Directory of Open Access Journals (Sweden)

M Khosravi

2012-05-01

Full Text Available The majority of existing tractors in Iran are not equipped with any tools to measure and display slip and ground speed. This is mainly due to the lack of national standards for measuring tools and instruments of tractors. In current research, an interchangeable system for two wheel drive tractors has been designed. Furthermore, it has been assessed after construction. To measure actual and theoretical ground speed, four rotary encoders for sensing the rotation of front and rear wheels have been utilized. Slip and ground speed were measured by means of software which has been developed in an ATmega16PU microprocessor. The measured slip and speed are digitally displayed on tractor dashboard. To evaluate the performance of the system, the measured values of ground speed and slip were compared with their calculated values obtained from conventional method. The Micro-controller has been programmed in such a way that the effect of front wheel sliding on slip is eliminated. In all evaluation conditions (in field and on asphalt, the maximum difference between system measurements for slip and speed and calculated slip and speed via conventional method was 2.4% and 0.2 km h-1, respectively. With slight alteration this system can be fitted on any kind of exiting two wheel drive tractors in the country.

Development of new all-terrain chip harvester

International Nuclear Information System (INIS)

Helevirta, K.

2001-01-01

The objective of the project is to develop a new, efficient, reliable and profitable wood harvesting machine for serial production, which could be applied for chipping of logging residues and forest energy from thinnings at the lot, and which would fit into the harvesting chain. The project has been carried out by developing first a method prototype. Biowatti Oy, mastering the harvesting chains of forest energy, has tested the method and the concept, and approved it to be operable. The machine has been delivered to an experienced forest entrepreneur for testing in actual field conditions. Final productivity tests have not been finished yet, and the results have not been analyzed. Preliminary results show that when chipping the residues at the lot, using 300-m haulage distance and unloading into a chip lorry, the productivity to be about 60 bulk-m 3 /h, and the fuel consumption to be 1,1 liters/bulk m 3 . The machine can be fueled by tax-free fuel oil. The PIKA LOCH 2000 chipper, developed in the project, will first be marketed in Finland, Sweden and other parts of Europe. In Finland there is a need for lot- chippers and employment of them so they can get investment subsidies from the Finnish Ministry of Trade and Industry, which is expected to increase the share of lot-chippers in harvesting of wood energy. (orig.)

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

2005-12-01

Details are given of a project to develop a harvesting system that can produce fuel economically in a single pass to a required specification at a cost that is profitable for the grower while minimising the cost of the product. The project objectives listed include the development of a harvester drive chain and feeding systems to allow harvesting of the higher yielding crops now produced in the UK, determination of the most economic harvesting cycle for SRC crops, and production of fuels suitable for co-firing with coal in pulverised fuel systems or for gasification. The work programme and project conclusions are discussed

TractoR: Magnetic Resonance Imaging and Tractography with R

Directory of Open Access Journals (Sweden)

Chris A. Clark

2011-10-01

Full Text Available Statistical techniques play a major role in contemporary methods for analyzing magnetic resonance imaging (MRI data. In addition to the central role that classical statistical methods play in research using MRI, statistical modeling and machine learning techniques are key to many modern data analysis pipelines. Applications for these techniques cover a broad spectrum of research, including many preclinical and clinical studies, and in some cases these methods are working their way into widespread routine use. In this manuscript we describe a software tool called TractoR (for “Tractography with R”, a collection of packages for the R language and environment, along with additional infrastructure for straightforwardly performing common image processing tasks. TractoR provides general purpose functions for reading, writing and manipulating MR images, as well as more specific code for fitting signal models to diffusion MRI data and performing tractography, a technique for visualizing neural connectivity.

Harvester development for new high yielding SRC crops and markets

Energy Technology Data Exchange (ETDEWEB)

Paulson, Mark

2005-07-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented.

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

Paulson, Mark

2005-01-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented

Analysis of fatal accidents with tractors in the Centre of Portugal: Ten years analysis.

Science.gov (United States)

Antunes, Soraia M; Cordeiro, Cristina; Teixeira, Helena M

2018-06-01

Tractors have been described as one of the deadliest farming implements concerning agricultural activity. In Portugal, the scientific investigations about this problem are practically non-existent, with only statistical studies performed by entities related to road traffic safety, not in accordance to the study now performed, pinpointing the possibility of an underreporting of these accidents. This work aims to characterize the fatal tractor accidents in Portugal, autopsied at the Forensic Pathology Department of the Centre Branch of the National Institute of Legal Medicine and Forensic Sciences of Portugal, analysing several variables: gender, age, occupation, survival time, the victim position in the tractor, cause of death, toxicological and histological exams, year/month/day of the week, type of agricultural machine, existence of rollover protective structures (ROPS), type of accident, ground conditions, circumstantial information and geographic distribution of the accidents. All the autopsies between 2005 and 2014 were analysed. The victim profile corresponded to a man (89.5%), between 61 and 70 years old (33.3%), retired (43.9%), being the tractor driver (45.6%). In most of the cases, death occurred in less than 24h after the accident. These fatalities arose mainly in May and October. Rollover in sloping land was the most common type of accident, and cranioencephalic, thoracic and abdominal traumatic injuries were the main cause of death. In 16.2% of the cases, blood alcohol concentration was above the lower limit established in our road traffic law (accidents, and the corresponding circumstances that contributed to the death. Many barriers remain about this matter, but the Portuguese government begin to design several laws to prevent this type of accidents. Future investigations should be performed to understand the real dimension of tractor accidents in Portugal, and to comprehend the efficiency of laws implemented by the government. Copyright © 2018

The mathematical model for the investigation of different influence factors on the economic and ecological indicators of a wheel tractor

Directory of Open Access Journals (Sweden)

Zakharchuk V.I.

2016-08-01

Full Text Available To solve the problem of oil deficit and reduce emissions of harmful substances from exhaust gases of vehicles alternative motor fuels, including biodiesel may by used. Most of wheel tractors are used as technological transport in agriculture, industry and municipal services. The article aims to clarify the mathematical model to determine the effect of the type of fuel used wheeled tractors on its performance. The mathematical model of the system "operator-wheel tractor-road" for the design research impact type of fuel on harmful emissions and fuel consumption wheeled tractor, is used as technological transport during its movement for driving cycle. Driving cycle showed main modes of motion there are acceleration, motion with constant speed and deceleration. The mathematical model allows to accurately consider peculiarities of the wheel tractor as the vehicle and engine describing its characteristics by polinomial dependencies. In mathematical models specified polynomial dependences that describe the fuel supply cycle indicated torque, fuel consumption and concentrations of main harmful substances in the exhaust gases of diesel during operation on diesel and biodiesel.

Simulação da estabilidade de tratores agrícolas 4x2 Simulation of the stability of 2wd agricultural tractors

Directory of Open Access Journals (Sweden)

Joseph Kalil Khoury Junior

2009-01-01

Full Text Available O objetivo do trabalho foi simular computacionalmente a estabilidade de tratores agrícolas 4x2. Experimentos de simulação foram realizados visando analisar o comportamento dinâmico de um trator agrícola 4x2 trabalhando em diferentes condições de operação e de terreno. Nas simulações em que se variaram as posições do trator sobre uma pista inclinada até o tombamento lateral, o ângulo de posição igual a 60º foi o de pior situação, o que corresponde ao trator descer por uma diagonal em pista inclinada para a esquerda. A bitola e a localização do centro de gravidade na vertical foram os fatores que mais afetaram a estabilidade do trator em tombamentos laterais. Já, a localização do centro de gravidade na longitudinal e a distância entre eixos afetaram mais a estabilidade do trator em tombamentos para trás. O trator deslizou os rodados do lado do tombamento ou perdeu a dirigibilidade dos pneus frontais com ângulos inferiores aos limites de estabilidade para tombamento.The objective of this work was to predict the loss of 2WD tractors stability. Simulations were done to analyze the dynamic behavior of an agricultural tractor working in different operation and surface conditions. Simulating different tractor positions on an inclined track until its side overturn, the tractor angle position of 60º presented the worst situation, what represented a tractor moving diagonally down on a left inclined track. Changing the tractor geometry and weight in the simulations, the vertical position of tractor central mass and its tread width were the parameters that most affected the tractor stability to side overturn. The longitudinal position of tractor central mass and the distance between its axes influenced on the tractor stability to rearward overturning. The tractor either slip the wheels at the side overturning or lost the front tire controlling at angles less than the overturning limits.

Gravity, two times, tractors, Weyl invariance, and six-dimensional quantum mechanics

International Nuclear Information System (INIS)

Bonezzi, R.; Latini, E.; Waldron, A.

2010-01-01

Fefferman and Graham showed some time ago that four-dimensional conformal geometries could be analyzed in terms of six-dimensional, ambient, Riemannian geometries admitting a closed homothety. Recently, it was shown how conformal geometry provides a description of physics manifestly invariant under local choices of unit systems. Strikingly, Einstein's equations are then equivalent to the existence of a parallel scale tractor (a six-component vector subject to a certain first order covariant constancy condition at every point in four-dimensional spacetime). These results suggest a six-dimensional description of four-dimensional physics, a viewpoint promulgated by the 2 times physics program of Bars. The Fefferman-Graham construction relies on a triplet of operators corresponding, respectively, to a curved six-dimensional light cone, the dilation generator and the Laplacian. These form an sp(2) algebra which Bars employs as a first class algebra of constraints in a six-dimensional gauge theory. In this article four-dimensional gravity is recast in terms of six-dimensional quantum mechanics by melding the 2 times and tractor approaches. This parent formulation of gravity is built from an infinite set of six-dimensional fields. Successively integrating out these fields yields various novel descriptions of gravity including a new four-dimensional one built from a scalar doublet, a tractor-vector multiplet and a conformal class of metrics.

Optical pulling force on a magneto-dielectric Rayleigh sphere in Bessel tractor polarized beams

International Nuclear Information System (INIS)

Mitri, F.G.; Li, R.X.; Yang, R.P.; Guo, L.X.; Ding, C.Y.

2016-01-01

The optical radiation force induced by Bessel (vortex) beams on a magneto-dielectric subwavelength sphere is investigated with particular emphasis on the beam polarization and order l (or topological charge). The analysis is focused on identifying the regions and some of the conditions to achieve retrograde motion of the sphere centered on the axis of wave propagation of the incident beam, or shifted off-axially. Exact non-paraxial analytical solutions are established, and computations for linear, circular, radial, azimuthal and mixed polarizations of the individual plane wave components forming the Bessel (vortex) beams by means of the angular spectrum decomposition method (ASDM) illustrate the theory with particular emphasis on the tractor (i.e. reversal) behavior of the force. This effect results in the pulling of the magneto-dielectric sphere against the forward linear momentum density flux associated with the incoming waves. Should some conditions related to the choice of the beam parameters as well as the permittivity and permeability of the sphere be met, the optical force vanishes and reverses sign. Moreover, the beam polarization is shown to affect differently the axial negative pulling force for either the zeroth- or the first-order Bessel beam. When the sphere is centered on the beam′s axis, the axial force component is always negative for the zeroth-order Bessel beam except for the radial and azimuthal polarization configurations. Nonetheless, for the first-order Bessel beam, the axial force is negative for the radial polarization case only. Additional tractor beam effects arise when the sphere departs from the center of the beam. It is also demonstrated that the tractor beam effect arises from the force component originating from the cross-interaction between the electric and magnetic dipoles. Potential applications are in particle manipulation, optical levitation, tractor beam tweezers, and other emergent technologies using polarized Bessel beams on

MATHEMATICAL MODEL AND METHODOLOGY FOR CALCULATION OF MINIMIZATION ON TURNING RADIUS OF TRACTOR UNIT WITH REPLACEABLE SUPPORTING AND MANEUVERING DEVICE

Directory of Open Access Journals (Sweden)

P. V. Zeleniy

2016-01-01

Full Text Available Smooth plowing with the help of reversible plows has replaced an enclosure method of soil treatment. The method may cause a formation of back ridges or open furrows. Due to this fact turnings of a tractor unit with a minimum radius required in order to ensure shuttle movements each time in the furrow of the preceding operating stroke have become a dominant type of turnings. Non-productive shift time is directly dependent on them and it is on the average 10–12 %, and it is up to 40 % in small contour areas with short run. Large non-productive time is connected with the desire to reduce headland width at field edges, and then a turning is made in several stages while using a complicated maneuvering. Therefore, an increase in efficiency of a plowing unit by means of minimization on its turning radius and execution of turning at one stage in the shortest possible time are considered as relevant objectives. In such a case it is necessary to take into account the fact that potential capabilities of universal tractors having established time-proved designs in respect of reduction of turning radius are practically at the end. So it is expedient to solve the matter at the expense of additional removable devices that ensure transformation of tractor wheel formula at the run end in order to reorient its position. Finally high quality plowing ensured by future-oriented reversible plows will be accompanied not only by output increase per shift, but also by decrease in headland width, their compaction and abrasion due to suspension systems and increase in productivity. The developed design having a novelty which proved by an invention patent and representing an additional supporting and maneuvering device significantly minimizes all the above-mentioned disadvantages and does not require any changes in tractor production design. Investigations have been carried on the following topic: “Minimization of turning radius for universal tractors by transformation

Identifying and prioritizing customer requirements from tractor production by QFD method

Directory of Open Access Journals (Sweden)

H Taghizadeh

2017-05-01

of AHP method for determining primary priorities of perceived customers needs and demands revealed as follows respectively: quality of parts, warranty and maintenance, low price, fuel consumption, comfort and peace, life and durability, smooth moving, fast respond of brakes, creating operator cabin and easy access to spare components. Finally, the main demands and related technical requirements have been identified and prioritized with QFD method; the Final results of customer demands and needs by QFD method revealed this prioritization: Quality of Parts, Warranty And Maintenance, low price, Fuel Consumption, Peace and Comfort, Life and Durability, Smooth Movement and lower engine knocking, Fast Respond of Braking System, Creating Operator Room and Easy Access to Components. Conclusions Without any doubt it is obvious that the obtaining customer satisfaction is the most important strategic tool for having successful and highly developed industry in this era. Knowing the customer demands and needs can lead the organization to enhance competitive advantages. This research showed that how could use structured QFD method for identifying prioritization of tractor customer demands and needs for maintain their satisfaction, and identifying importance of each demands, considering the production techniques.

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

Energy Technology Data Exchange (ETDEWEB)

Dogan, Oguz; Karpat, Fatih; Yuce, Celalettin; Kaya, Necmettin; Yavuz, Nurettin [Uludag University, Gorukle (Turkmenistan); Sen, Hasan [Valeo A. S., Bursa (Turkmenistan)

2016-06-15

This paper presents a methodology for re-designing a failed tractor transmission component subjected to cyclic loading. Unlike other vehicles, tractors cope with tough working conditions. Thus, it is necessary to re-design components by using modern optimization techniques. To extend their service life, we present a design methodology for a failed tractor clutch power take-off finger. The finger was completely re-designed using topology and shape optimization approach. Stress-life based fatigue analyses were performed. Shape optimization and response surface methodology were conducted to obtain optimum dimensions of the finger. Two design parameters were selected for the design of experiment method and 15 cases were analyzed. By using design of the experiment method, three responses were obtained: Maximum stresses, mass, and displacement depending on the selected the design parameters. After solving the optimization problem, we achieved a maximum stress and mass reduction of 14% and 6%, respectively. The stiffness was improved up to 31.6% compared to the initial design.

Retrofitting tractors with rollover protective structures: perspective of equipment dealers.

Science.gov (United States)

Tonelli, S M; Donham, K J; Leedom-Larson, K; Sanderson, W; Purschwitz, M

2009-10-01

This study was one of a cluster of studies that originated via requests for proposals from the NIOSH National Agricultural Tractor Safety Initiative. The present study design consisted of several steps: (1) formation of an advisory group, (2) development and testing of a standard paper self-responding survey instrument, (3) sample selection of farm equipment dealers, (4) administration of the survey, (5) assessment and analysis of the survey, and (6) in-person response panel of dealers (n = 80) to review results of the questionnaire for further definition and sharpening of the recommendations from the survey. A key finding is that most dealers do not currently sell or install ROPS retrofit kits. Barriers cited by dealers included (1) actual or perceived lack of farmer demand, (2) injury liability, (3) expensive freight for ordering ROPS, (4) lack of dealer awareness of the magnitude of deaths from tractor overturns and the high life-protective factor of ROPS, and (5) difficulty and incursion of non-recoverable expenses in locating and obtaining specific ROPS. Despite not currently selling or installing ROPS, dealers responded favorably about their future potential role in ROPS promotion and sales. Dealers were willing to further promote, sell, and install ROPS if there was demand from farmers. Recommendations include establishing a ROPS "clearing house" that dealers could contact to facilitate locating and obtaining ROPS orders from customers. Additional recommendations include education and social marketing targeting farm machinery dealers as well farmers, manufacturers, and policy makers.

Development of multi-functional combine harvester with grain harvesting and straw baling

International Nuclear Information System (INIS)

Tang, Z.; Li, Y.; Cheng, C.

2017-01-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

Development of multi-functional combine harvester with grain harvesting and straw baling

Energy Technology Data Exchange (ETDEWEB)

Tang, Z.; Li, Y.; Cheng, C.

2017-09-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT)

Energy Technology Data Exchange (ETDEWEB)

Caffaro, F.; Bisaglia, C.; Cutini, M.; Cremasco, M.M.; Cavallo, E.

2017-07-01

At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT) was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI) of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts). During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT

Directory of Open Access Journals (Sweden)

Federica Caffaro

2018-02-01

Full Text Available At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts. During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT)

International Nuclear Information System (INIS)

Caffaro, F.; Bisaglia, C.; Cutini, M.; Cremasco, M.M.; Cavallo, E.

2017-01-01

At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT) was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI) of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts). During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

Effect of Tractor Forward Speed on Sandy Loam Soil Physical ...

African Journals Online (AJOL)

Results indicate significant differences in soil physical conditions arising from different levels of tractor forward speed. A forward speed of approximately 7km/h resulted in appreciable amelioration of soil structure as reflected in improvements in the soil strength properties and maximum reduction in clod mean weight ...

Characteristics of paddy operations with biodiesel fuelled tractor

Energy Technology Data Exchange (ETDEWEB)

Kim, Y.; Park, S.H.; Kim, C.K.; Im, D.H.; Kim, H.J.; Chung, S.C. [National Academy of Agricultural Science, Seodundong, Suwon (Korea, Democratic People' s Republic of); Kim, S.S. [Daedong Industrial Co., Chang Nyong-Kun, Kyungnam (Korea, Democratic People' s Republic of)

2010-07-01

This paper reported on a study in which biofuels were tested for their power and competitiveness in various paddy operations, such as plowing and rotary tilling of paddy fields. The study considered the use of diesel fuel as well as 20 per cent biodiesel (BD20) and 100 per cent biodiesel (BD100) as an alternative fuel for tractors. Ignition problems or abrupt stopping were not monitored during operations of plowing, rotary tilling and travelling on the road. According to tractor power take-off (PTO) test codes, there was no considerable power difference between the 3 fuels. However, fuel consumption rates were quite different between the biodiesels and diesel fuel in the paddy works. Fuel consumption increased when biodiesel content increased. Approximately 35 to 40 per cent more fuel was needed for rotary tilling operations than plowing operations. Within the operations, the maximum difference occurred during the rotary tilling of wet paddy fields. This difference was as high as 20 per cent , between BD100 and diesel fuel. In terms of exhaust gases, more carbon dioxide was discharged from diesel fuel than biodiesels, but more nitrous oxide was discharged with biodiesels. It was difficult to differentiate quantities of carbon monoxide between the 3 different fuels.

Noise levels of a track-laying tractor during field operations in the vineyard

Directory of Open Access Journals (Sweden)

Pietro Catania

2013-09-01

Full Text Available Noise in agriculture is one of the risk factors to be taken into account in the assessment of the health and safety of workers; in particular, it is known that the tractor is a source of high noise. The Italian Low Decree 81/2008 defined the requirements for assessing and managing noise risk identifying a number of procedures to be adopted at different noise levels to limit workers exposure. This paper concerns the analysis of the noise risk arising from the use of a tracklaying tractor during field operations carried out in the vineyard. The objective of this study was to evaluate the noise level that comes close to the ear of the operator driving the tractor measuring the values of equivalent sound level (Leq(A and peak sound pressure (LCpk. We considered four options related to the same tractor coupled with the following tools to perform some farming operations: rototilling, chisel plough, flail mowers and vibro farmer. We considered three test conditions: T1 in flat (slope 0%, T2 uphill and T3 downhill (both 30% slope. The instrument used for the measurements is a precision integrating portable sound level meter, class 1, model HD2110L by Delta OHM, Italy. Each survey lasted 2 minutes, with an interval of measurement equal to 0.5 s. The tests were performed in compliance with the standards ISO 9612 and ISO 9432. The results show that the measured sound levels exceed the limits allowed by the regulations in almost all the test conditions; values exceeding the threshold limit of 80 dB(A were recorded coming up to a maximum value of 92.8 dB(A for flail mowers in test T1. When limits imposed by the regulations are exceeded, the operator is obliged to wear the appropriate Personal Protective Equipment.

Levels of vibration transmitted to the operator of the tractor equipped with front axle suspension

Directory of Open Access Journals (Sweden)

Daniele Pochi

2013-09-01

Full Text Available In recent years the comfort and the preservation of the health of the operators became central issues in the evolution of agricultural machinery and led to the introduction of devices aimed at improving working conditions. Thereby, for instance, the presence of air conditioner, soundproof cab and driver seat suspension became normal on agricultural tractors. The vibrations are one of the most complex issues to deal with, being determined by the characteristics and interaction of elements such as tyres, axles, mainframe, cab and seat suspension. In this respect, manufacturers are trying to improve their products, even integrating these elements with new devices such as the suspension on the front axle of the tractor, aimed at reducing the level of vibrations during the transfers at high speed. One of these underwent tests at CRA-ING. Since its purpose is to reduce the level of vibration transmitted to the driver, their measurements in different points of the tractor and in different operating conditions, were compared in order to evaluate the effectiveness of the device, expressed as time of exposure. The suspension system of the front axle is designed to absorb the oscillations (especially pitching determined by irregularities in the road surface, allowing an increased control of the vehicle at high speed, as demonstrated by the test results and confirmed by the driving impressions outlined by the operator. The action of the device under these conditions results in an increase of the exposure time, important fact because of the relevance of the road transfer operations of tractors with mounted implements or trailers to tow and of the tendency to increase the speed limit for the road tractors (in Germany were brought to 50 km h–1 for several years. The action just described is less evident with increasing irregularity of the road surface and with the decrease of the travel speed. Nevertheless, in such conditions, the device appears to

Organizational and technological compatibility of the technological processes of second and third line maintenance of KhTZ-3522 tractors

Directory of Open Access Journals (Sweden)

Kyzminskyj Roman

2018-01-01

Full Text Available The work is devoted to systematic substantiation of productivity, production structure and specialization of service stations of KhTZ-3522 tractors. Based on the technical and economic comparative analysis of the results of the technological processes modeling of the second and third line maintenance of KhTZ-3522 tractors, the parametrical series of production structures of service stations both mono- and polytechnological specialization, which can work effectively in a wide range of the general annual program of orders, and in the conditions of seasonal fluctuations of orders for the maintenance of these tractors, are found. The results of calculations of the indicators system for organizational and technological compatibility of technological processes of the second and third line maintenance of KhTZ-3522 tractors in the joint technological flow are presented. The dependencies of these indicators on the total annual program of orders for service stations of different productivity are analyzed. According to the results of the analysis, the polytechnological specialization of such service stations is substantiated.

Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month Final Report

Energy Technology Data Exchange (ETDEWEB)

Walkowicz, K.; Lammert, M.; Curran, P.

2012-08-01

This 13-month evaluation used five Kenworth T370 hybrid tractors and five Freightliner M2106 standard diesel tractors at a Coca Cola Refreshments facility in Miami, Florida. The primary objective was to evaluate the fuel economy, emissions, and operational field performance of hybrid electric vehicles when compared to similar-use conventional diesel vehicles. A random dispatch system ensures the vehicles are used in a similar manner. GPS logging, fueling, and maintenance records and laboratory dynamometer testing are used to evaluate the performance of these hybrid tractors. Both groups drive similar duty cycles with similar kinetic intensity (0.95 vs. 0.69), average speed (20.6 vs. 24.3 mph), and stops per mile (1.9 vs. 1.5). The study demonstrated the hybrid group had a 13.7% fuel economy improvement over the diesel group. Laboratory fuel economy and field fuel economy study showed similar trends along the range of KI and stops per mile. Hybrid maintenance costs were 51% lower per mile; hybrid fuel costs per mile were 12% less than for the diesels; and hybrid vehicle total cost of operation per mile was 24% less than the cost of operation for the diesel group.

Life-cycle assessment of a Solar Assist Plug-in Hybrid electric Tractor (SAPHT) in comparison with a conventional tractor

International Nuclear Information System (INIS)

Mousazadeh, Hossein; Keyhani, Alireza; Javadi, Arzhang; Mobli, Hossein; Abrinia, Karen; Sharifi, Ahmad

2011-01-01

The most well-known reason of global warming is equivalent carbon dioxide (CO 2equ ) emitted from fossil fuels combustion in on-road and off-road vehicles. An appreciable portion of off-road pollution is allocated to farm implements. All cited studies have shown that renewable based electric vehicles (EVs) decrease petroleum consumption and consequently reduce criteria emissions under nearly all circumstances. Considering this, a Solar Assist Plug-in Hybrid electric Tractor (SAPHT) was designed, constructed and evaluated. This research evaluated the life cycle analysis of SAPHT project and compared the results with that of an internal combustion engine tractor (ICET). The life cycle was analyzed based on economical cost and environmental emissions. The externality of environmental pollutions was calculated to derive the life-cycle costs (LCC). The results showed that substituting each ICET by SAPHT can prevent 14 ton CO 2equ emission to atmosphere annually. Also it prevents a high volume of other emissions such as CO, NO x and PM 10 entering the atmosphere. LCC assessment emphasizes on economical effectiveness of SAPHT rather than ICET at any diesel fuel price, therefore, increasing fuel unit prices leads to more effectiveness. It is concluded that levelized cost of energy (LCE) in Euro /kW h for ICET is almost twice as that of SAPHT. Some of these advantages for SAPHT are offset in part by high purchase costs, heavy and massive batteries and low operating range.

Performance of Single Axle Tractors in the Semi-Arid Central Part of ...

African Journals Online (AJOL)

user1

Performance evaluation of three single axle tractors namely Dongfeng15 hp and 12 hp ... On average the agricultural sector accounts for 42.9% gross domestic product and ..... a and b are constant(coefficient) with (+) or (-) sign shown table ...

Wind energy harvesting with a piezoelectric harvester

International Nuclear Information System (INIS)

Wu, Nan; Wang, Quan; Xie, Xiangdong

2013-01-01

An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

La normalización y certificación de tractores agrícolas en México

OpenAIRE

Alma Velia Ayala Garay; Rocío Cervantes Osornio; Marco Antonio Audelo Benítez; Noé Velázquez López; José Manuel Vargas Sállago

2013-01-01

El tractor agrícola es la principal fuente de potencia dentro de una unidad de producción. Por lo tanto para los usuarios de maquinaria agrícola, resulta una prioridad contar con mecanismos que permitan dar seguridad al usuario final o productor agrícola en el funcionamiento y calidad de los tractores, para esto el objetivo del presente es dar a conocer la evolución de la normalización y certificación de la maquinaria agrícola en México, sus impactos y tendencias, por medio de una descripción...

Modelling and Simulation of a Hydrostatic Steering System for Agricultural Tractors

Directory of Open Access Journals (Sweden)

Barbara Zardin

2018-01-01

Full Text Available The steering system of a vehicle impacts on the vehicle performance, safety and on the driver’s comfort. Moreover, in off-road vehicles using hydrostatic steering systems, the energy dissipation also becomes a critical issue. These aspects push and motivate innovation, research and analysis in the field of agricultural tractors. This paper proposes the modelling and analysis of a hydrostatic steering system for an agricultural tractor to calculate the performance of the system and determine the influence of its main design parameters. The focus here is on the driver’s steering feel, which can improve the driver’s behavior reducing unnecessary steering corrections during the working conditions. The hydrostatic steering system is quite complex and involves a hydraulic circuit and a mechanical mechanism to transmit the steering to the vehicle tires. The detailed lumped parameters model here proposed allows to simulate the dynamic behavior of the steering system and to both enhance the understanding of the system and to improve the design through parameters sensitivity analysis.

DETERMINATION OF AGRICULTURAL MACHINERY OPERATORS’ OPINIONS ABOUT THE CABIN COMFORT IN ESKİŞEHİR

Directory of Open Access Journals (Sweden)

Özge ACARBAŞ BALTACI

2015-08-01

Full Text Available Comfort has a great importance in the interior design of tractor and agricultural machinery cabins. Operators are exposed to muscoskeletal system disorders since they spend long time periods during the day in these vehicles. There is a few work in the literature reporting operators’ opinions about cabin comfort of these machineries. In this study, a questionnaire was conducted in order to get information about agricultural machinery operators’ opinions about the comfort of their vehicles. Tractor cabins and combine harvester machine cabins were selected as machineries. The study was conducted in Eskişehir in Turkey. Questionnaire was composed of four groups of questions and five ordered response levels were used in the Likert's scale. Demographic questions, general questions about the machine, personal evaluation questions and open ended questions were asked to the operators. After the questionnaire completed, collected data were classified according to the machine type. Frequency tables were used to present the results. Visibility and the accessibility were the most satisfied issues for the tractor operators with 55.9% and 55.4% percentages, respectively. Seat comfort has the highest satisfaction degree with 43.7% for the combine harvester operators. Cronbach Alpha reliability coefficient was used for the satisfaction questions in the applied questionnaire. The reliability of the study was high with coefficients of 0.878 and 0.940 for the tractor and combine harvester questionnaires, respectively. This study will support design and development process of new products by considering operator opinions.

A three-stage heuristic for harvest scheduling with access road network development

Science.gov (United States)

Mark M. Clark; Russell D. Meller; Timothy P. McDonald

2000-01-01

In this article we present a new model for the scheduling of forest harvesting with spatial and temporal constraints. Our approach is unique in that we incorporate access road network development into the harvest scheduling selection process. Due to the difficulty of solving the problem optimally, we develop a heuristic that consists of a solution construction stage...

Eficiência energética de tratores agrícolas fabricados no Brasil Energy efficiency of Brazilian agricultural tractors

Directory of Open Access Journals (Sweden)

Gastão M. da Silveira

2010-04-01

Full Text Available Atualmente, cresce o interesse global na economia de combustível fóssil e na redução das emissões de gases, por motivos econômicos e ecológicos. Neste trabalho se aplicou um método para classificação de tratores agrícolas, com base na sua eficiência energética, usando-se o consumo específico (em L kWh-1 como termo de comparação. O fator energético mais importante para essa máquina é o seu motor, seguido da transmissão. O trabalho se baseia no resultado dos ensaios de tratores realizados segundo normas brasileiras, tendo como modelo o código OECD, além de ser uma classificação de modelos de tratores fabricados no País. Os tratores movidos a álcool apresentaram consumo elevado de combustível. A metodologia permite a idéia de como os tratores se comportam, no que diz respeito à eficiência energética.Nowadays there is a growing global interest in saving fossil fuel and reducing gas emissions for economical and ecological reasons. This research applied a method of classification of agricultural tractors depending on their energy efficiency, using the specific fuel consumption (in L kWh-1 as a comparison. The most important energy factor in these machines is the engine, followed by the transmission. This research is based on results of the OECD tractor test and classifies tractor models, which have been principally sold in Brazil. The tractors fueled by ethanol presented a high level of fuel consumption. The methodology allows us to understand how tractors perform in terms of energy efficiency.

Designing A General Deep Web Harvester by Harvestability Factor

NARCIS (Netherlands)

Khelghati, Mohammadreza; van Keulen, Maurice; Hiemstra, Djoerd

2014-01-01

To make deep web data accessible, harvesters have a crucial role. Targeting different domains and websites enhances the need of a general-purpose harvester which can be applied to different settings and situations. To develop such a harvester, a large number of issues should be addressed. To have

A History of the Caterpillar Tractor Company's Use of Motion Pictures.

Science.gov (United States)

Veeder, Gerry A.

Film historians have tended to overlook the industrial film even though it has been widely used as a sales tool since early in this century. The Caterpillar Tractor Company was one of the first to adopt this medium as a means of demonstrating what its machines could do in a variety of situations. While other types of films have been made by…

Harvest: a web-based biomedical data discovery and reporting application development platform.

Science.gov (United States)

Italia, Michael J; Pennington, Jeffrey W; Ruth, Byron; Wrazien, Stacey; Loutrel, Jennifer G; Crenshaw, E Bryan; Miller, Jeffrey; White, Peter S

2013-01-01

Biomedical researchers share a common challenge of making complex data understandable and accessible. This need is increasingly acute as investigators seek opportunities for discovery amidst an exponential growth in the volume and complexity of laboratory and clinical data. To address this need, we developed Harvest, an open source framework that provides a set of modular components to aid the rapid development and deployment of custom data discovery software applications. Harvest incorporates visual representations of multidimensional data types in an intuitive, web-based interface that promotes a real-time, iterative approach to exploring complex clinical and experimental data. The Harvest architecture capitalizes on standards-based, open source technologies to address multiple functional needs critical to a research and development environment, including domain-specific data modeling, abstraction of complex data models, and a customizable web client.

Development of an adaptive harvest management program for Taiga bean geese

Science.gov (United States)

Johnson, Fred A.; Alhainen, Mikko; Fox, Anthony D.; Madsen, Jesper

2016-01-01

harvest rate is more practical, but our matrix model does not permit one to calculate an exact harvest associated with a specific harvest rate. Approximate harvests for current population size in the Central Management Unit are 0, 1,200, 2,300, and 3,500 for the 5, 10, 15, and 20-year time horizons, respectively. Populations of taiga bean geese in the Western and Eastern Units would require at least 10 and 13 years, respectively, to reach their minimum goals under the most optimistic of scenarios. The presence of harvest, density dependence, or environmental variation could extend these time frames considerably. Finally, we stress that development and implementation of internationally coordinated monitoring programs will be essential to further development and implementation of an adaptive harvest management program.

Impact on food productivity by fossil fuel independence - A case study of a Swedish small-scale integrated organic farm

Energy Technology Data Exchange (ETDEWEB)

Johansson, Sheshti [Dept. of Energy and Technology, Swedish Univ. of Agricultural Sciences, Uppsala (Sweden); Belfrage, Kristina [Centre for Sustainable Agriculture, Swedish Univ. of Agricultural Sciences, Uppsala (Sweden); Olsson, Mats [Dept. of Soil and Environment, Swedish Univ. of Agricultural Sciences, Uppsala (Sweden)

2013-02-15

The large-scale industrial agriculture that provides the majority of food at present is dependent upon fossil fuels in the form of tractor fuel, mineral fertilizers, pesticides, and irrigation. Yet, the age of cheap and abundant fossil fuels will likely come to an end within the coming decades. In this case study, the productivity of a small-scale farm (8 ha arable land, 5.5 ha meadow, 3.5 ha pasture and 18 ha forest) independent on fossil fuels by using organic methods and draught horse power was investigated. The aim was to quantify its productivity when the animal composition and possible alternatives to tractive power were varied. After an analysis of possible solutions, three scenarios for tractive power were selected: draught horse power, diesel tractor, and combination of draught horse power and rapeseed oil fueled tractor. A model that calculates the amount of food available at the farm in terms of meat, milk egg, and crops, converts it into energy units and calculates how many people can be supplied from the farm was developed. The most reasonable of the scenarios studied was when draught horse power was combined with tractor (and combine harvester) driven on locally produced rapeseed oil. Then the farm will have access to all advantages with the tractor and harvester, e.g., timeliness in harvest and lifting heavy loads, and the renewability and efficiency of draught horse power on smaller fields, and lighter operations. This system was able to support between 66 and 82 persons depending on crop yields, milk yields, meat production, fuel demand for the tractor, and availability of forest grazing. Most likely the production capacity lands on ability to support approximately 68 - 70 persons, and the farm may require fossil fuels to support more than 80 persons. If all farmland globally was to be operated with the same productivity, this would be enough for supplying the global population with food at present.

Development of Vibration-Based Piezoelectric Raindrop Energy Harvesting System

Science.gov (United States)

Wong, Chin Hong; Dahari, Zuraini

2017-03-01

The trend of finding new means to harvest energy has triggered numerous researches to explore the potential of raindrop energy harvesting. This paper presents an investigation on raindrop energy harvesting which compares the performance of polyvinylidene fluoride (PVDF) cantilever and bridge structure transducers and the development of a raindrop energy harvesting system. The parameters which contribute to the output voltage such as droplet size, droplets released at specific heights and dimensions of PVDF transducers are analyzed. Based on the experimental results, the outcomes have shown that the bridge structure transducer generated a higher voltage than the cantilever. Several dimensions have been tested and it was found that the 30 mm × 4 mm × 25 μm bridge structure transducer generated a relatively high AC open-circuit voltage, which is 4.22 V. The power generated by the bridge transducer is 18 μW across a load of 330 kΩ. The transducer is able to drive up a standard alternative current (AC) to direct current (DC) converter (full-wave bridge rectifier). It generated a DC voltage, V DC of 8.7 mV and 229 pW across a 330 kΩ resistor per drop. It is also capable to generate 9.3 nJ in 20 s from an actual rain event.

Analysis of swirl recovery vanes for increased propulsive efficiency in tractor propeller aircraft

NARCIS (Netherlands)

Veldhuis, L.L.M.; Stokkermans, T.C.A.; Sinnige, T.; Eitelberg, G.

2016-01-01

In this paper we address a preliminary assessment of the performance effects of swirl recovery vanes (SRVs) in a installed and uninstalled tractor propeller arrangement. A numerical analysis was performed on a propeller and a propeller-wing configuration after the SRVs were optimized first in a

Design Issues and in Field Tests of the New Sustainable Tractor LOCOSTRA

Directory of Open Access Journals (Sweden)

Emanuela Elisa Cepolina

2014-03-01

Full Text Available This paper presents a robotized small tractor designed to perform humanitarian demining operations and agricultural operations when demining is accomplished. This dual use makes this system unique. The focus is on the design of the machine, including the modeling for design and control, the characteristics of the tools operated by the machine, the motion control at tele-operated, and semi-autonomous levels. The mechatronic design process applied uses sustainable design strategies. Technical contributions are in the tractor architecture, designed to make automation easier, and in the control functions implemented on this architecture. Extensive field tests were performed in different sites; first, in Italy, focusing on the agricultural application of the machine, in natural scenarios with different ground and vegetation; then, in two real mine fields in Jordan focusing on the performance for technical survey in humanitarian demining. The tests have confirmed the performance for both task categories (agricultural and demining, confirming the correctness of the statement. For the demining application, the machine has been assessed by professional users confirming the acceptance to field use and the novelty of the concept.

Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil

International Nuclear Information System (INIS)

Al-lwayzy, Saddam H; Yusaf, Talal; Jensen, Troy

2012-01-01

Alternative fuels for diesel engines, such as biodiesel, have attracted much attention recently due to increasing fuel prices and the imperative to reduce emissions. The exhaust gas emissions from tractors and other agricultural machinery make a significant contribution to these emissions. The use of biodiesel in internal combustion engines (ICE) has been reported to give comparable performance to conventional diesel (CD), but with generally lower emissions. There is however, contradictory evidence of NO emissions being both higher and lower from the use of biodiesel. In this work, agriculture tractor engine performance and its emission using both CD and biodiesel from cotton seed oil (CSO-B20) mixed at a 20% blend ration has been evaluated and compared. The PTO test results showed comparable exhaust emissions between CD and CSO-B20. However, the use of CSO-B20 led to reductions in the thermal efficiency and exhaust temperature and an increase in the brake specific fuel consumption (BSFC), when compared to CD.

Harvest: an open platform for developing web-based biomedical data discovery and reporting applications.

Science.gov (United States)

Pennington, Jeffrey W; Ruth, Byron; Italia, Michael J; Miller, Jeffrey; Wrazien, Stacey; Loutrel, Jennifer G; Crenshaw, E Bryan; White, Peter S

2014-01-01

Biomedical researchers share a common challenge of making complex data understandable and accessible as they seek inherent relationships between attributes in disparate data types. Data discovery in this context is limited by a lack of query systems that efficiently show relationships between individual variables, but without the need to navigate underlying data models. We have addressed this need by developing Harvest, an open-source framework of modular components, and using it for the rapid development and deployment of custom data discovery software applications. Harvest incorporates visualizations of highly dimensional data in a web-based interface that promotes rapid exploration and export of any type of biomedical information, without exposing researchers to underlying data models. We evaluated Harvest with two cases: clinical data from pediatric cardiology and demonstration data from the OpenMRS project. Harvest's architecture and public open-source code offer a set of rapid application development tools to build data discovery applications for domain-specific biomedical data repositories. All resources, including the OpenMRS demonstration, can be found at http://harvest.research.chop.edu.

EVALUATION OF COSTS OF HARVESTER IN CUT AND PROCESSING OF EUCALYPTUS WOOD1

Directory of Open Access Journals (Sweden)

Larissa Nunes dos Santos

2017-11-01

Full Text Available ABSTRACT Before performing any financial analysis costs must be calculated. These costs should allow the planning and control over the use of the machines as well as the comparison between different investments alternatives since this is easily calculated. Generally the operating costs of forest harvesting machines are estimated until the maximum of 25,000 hours of work, and it is not possible to know whether the activity remains profitable thereafter or not. For this reason the objective of this study was to evaluate the costs from cutting activities and wood processing carried out by a forestry tractor harvester up to approximately 30,000 hours of work. Ten forest machines composed of two models of harvester (John Deere, model 1270D and 1470D were used. A spreadsheet provided by a forestry company located in the state of Minas Gerais, containing the necessary data to estimate the operating cost of the machines and subsequent achievement of the sensitivity analysis was used. The operating cost was obtained by the sum of the fixed and variable costs. For sensitivity analysis the variation ± 20% of the most representative elements of the total cost of the machine was performed. The results for the operating cost of the harvester and forwarder was U.S. $ 190.85 h-1. Costs for repairs and maintenance, labor, fuel, and depreciation represented approximately 90% of the total cost of the machine. Despite the fact that the age of the machine has a direct influence on its operating cost, the costs did not behave in a linear fashion over the years.

Distribution of MCA-coated grits in maize fields after high wheel tractor application for disrupting orientation of Diabrotica virgifera virgifera LeConte.

Science.gov (United States)

Wennemann, Ludger; Hummel, Hans E

2002-01-01

High wheel tractor applications of 4-methoxycinnamaldehyde (MCA)-coated corn granules ('grits') were conducted in Ruski Krstur (Serbia) in summer 2001 in a 5 ha corn field. Grits are a by-product after corn is harvested and separated from the cob and used as a carrier medium to disseminate MCA into the corn field. MCA is a kairomone mimic derived form Cucurbita maxima (Duchesne) used to disrupt orientation of Diabrotica virgifera virgifera LeConte towards different MCA and pheromone baited traps. The ultimate goal is to investigate the use of MCA as a mating disruptant. MCA was dissolved in an organic solvent and mixed in a cement machine with the grits. Grits were applied at rates of 17.39, 17.1 and 12.45 kg/ha on July 4th, July 19th and August 3rd. Before the impact of MCA as a disruptant can be addressed, the distribution patterns of MCA coated grits have to be thoroughly investigated. They were evaluated by counting girts deposited in 16 or 20 plastic dishes of 30-cm diameter positioned along 2 rows through the field directly after the grit application by tractor. Additionally, grits deposited on corn plant surface such as leaves, leaf axils and corn cobs were counted. Total number of grits collected in plastic dishes revealed even application rates at the first and second application but not on the third application date. Number of grits collected on plant surfaces were significantly different from each other regarding each application date. Altogether, grit distribution in the dishes as well as on the plant surface was variable. However, distribution patterns achieved so far hold promise to disseminate MCA coated grits into corn fields for orientation disruption or mating disruption of D. virgifera virgifera.

Analysis of the means of forest harvesting in the Federation of Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Halilović Velid

2015-01-01

Full Text Available The development of technology and the means of labour in the technological process of forest harvesting in FBiH mainly depends on the factors related to the specific manner of forest management. The dominant share of mixed tall forests with natural regeneration, the selective manner of management and rather difficult natural conditions have resulted in the application of the cut-to-length method and to a lesser extent, the tree-length and semi-tree-length methods. On the basis of expert classification of the development phases in forest harvesting, it can be noted that wood assortment production in FBiH is currently partially mechanised. With the aim of defining measures for increasing productivity, lowering the costs and a greater humanisation of work, there has been an analysis of the current state of the means of work in all three phases of forest harvesting. The analysis included the following parameters: number of means in different phases, the type, the average age, ownership and technical planned obsolescence. All the data were collected through a survey which included all stakeholders (cantonal forest companies and private contractors. The results showed a satisfactory state only when chainsaws are concerned, i.e. the rather cheap tools. Other equipment (adapted tractors, skidders, trucks, etc. has largely reached planned obsolescence. Their old age results in a low level of utilisation, i.e. an insufficient amount of working hours per year which eventually leads to a decrease in productivity and increase in expenses. Based on the data, it can be concluded that it is necessary to begin the process of new mechanisation procurement and the replacement of existing, time-worn and technologically obsolete machines with new ones. At the same time, it is clear that, in the conditions of low availability of investment capital and cheap labour force, this has to be a gradual process. In relation with this, the process should start in the most

Energy harvesting from high-rise buildings by a piezoelectric harvester device

International Nuclear Information System (INIS)

Xie, X.D.; Wang, Q.; Wang, S.J.

2015-01-01

A novel piezoelectric technology of harvesting energy from high-rise buildings is developed. While being used to harness vibration energy of a building, the technology is also helpful to dissipate vibration of the building by the designed piezoelectric harvester as a tuned mass damper. The piezoelectric harvester device is made of two groups of series piezoelectric generators connected by a shared shaft. The shaft is driven by a linking rod hinged on a proof mass on the tip of a cantilever fixed on the roof of the building. The influences of some practical considerations, such as the mass ratio of the proof mass to the main structure, the ratios of the length and flexural rigidity of the cantilever to those of the main structure, on the root mean square (RMS) of the generated electric power and the energy harvesting efficiency of the piezoelectric harvester device are discussed. The research provides a new method for an efficient and practical energy harvesting from high-rise buildings by piezoelectric harvesters. - Highlights: • A new piezoelectric technology in energy harvesting from high-rise buildings is introduced. • A new mathematics model to calculate the energy harvested by the piezoelectric device is developed. • A novel efficient design of the piezoelectric harvester device in provided. • An electric power up to 432 MW under a seismic excitation at a frequency of 30 rad/s is achieved.

Evaluation of the agricultural tractor using biofuel and diesel oil; Avaliacao de um trator agricola utilizando biocombustivel e oleo diesel

Energy Technology Data Exchange (ETDEWEB)

Lopes, Reny Adilmar Prestes; Pinheiro Neto, Raimundo; Meyer, Wagner; Mendonca, Elton Costa de; Roberti, Marcelo [Universidade Estadual de Maringa (UEM), PR (Brazil)], Emails: raplopes@uem.br, rpneto@uem.br

2009-07-01

Test with alternative fuels is essential to evaluate the performance of machines and engines. In this paper, the performance of a tractor in chiseling operation was evaluated using oil diesel and biofuel (oil diesel + soybean vegetable oil mixture). Speed of displacement, slip wheels, force traction bar and fuel consumption was evaluated in areas under tillage and no-tillage. The speed of displacement of the set presented similar behavior in tillage and no-tillage. Bigger values mean force in the bar of traction, slip and fuel consumptions had been observed for no-tillage with the tractor operating with diesel. Bigger values mean consumption the biofuel had been observed in areas under tillage. The coverings of the soil had influenced in the values of force bar traction, slip wheels, speed of displacement and fuel consumption. In the studied conditions, the tests demonstrate that the mixture oil diesel + soybean vegetable oil had not influenced in the performance of the tractor. (author)

Evaluation of the use of low-cost GPS receivers in the autonomous guidance of agricultural tractors

Energy Technology Data Exchange (ETDEWEB)

Alonso-Garcia, S.; Gomez-Gil, J.; Arribas, J. I.

2011-07-01

This paper evaluates the use of low-cost global positioning system (GPS) receivers in the autonomous guidance of agricultural tractors. An autonomous guidance system was installed in a 6400 John Deere agricultural tractor. A low cost GPS receiver was used as positioning sensor. Three different control laws were implemented in order to evaluate the autonomous guidance of the tractor with the low-cost receiver. The guidance was experimentally tested with the tracking of straight trajectories and with the step response. The total guidance error was obtained from the receiver accuracy and from the guidance error. For the evaluation of the receivers accuracy, positioning data from several low cost receivers were recorded and analyzed. For the evaluation of the guidance error, tests were performed with each control law at three different speeds. The conclusions obtained were that relative accuracy of low-cost receivers decreases with the time; that for an interval lower than 15 min, the error usually remains below 1 m; that all the control laws have a similar behavior and it is conditioned by the control law adjustment; that automatic guidance with low cost receivers is possible with speeds that went up to 9 km h{sup -}1; and finally, that the total error in the guidance is mainly determined by the receivers accuracy. (Author) 46 refs.

Design and development of a parametrically excited nonlinear energy harvester

International Nuclear Information System (INIS)

Yildirim, Tanju; Ghayesh, Mergen H.; Li, Weihua; Alici, Gursel

2016-01-01

Highlights: • A parametrically broadband energy harvester was fabricated. • Strong softening-type nonlinear behaviour was observed. • Experiments were conducted showing the large bandwidth of the device. - Abstract: An energy harvester has been designed, fabricated and tested based on the nonlinear dynamical response of a parametrically excited clamped-clamped beam with a central point-mass; magnets have been used as the central point-mass which pass through a coil when parametrically excited. Experiments have been conducted for the energy harvester when the system is excited (i) harmonically near the primary resonance; (ii) harmonically near the principal parametric resonance; (iii) by means of a non-smooth periodic excitation. An electrodynamic shaker was used to parametrically excite the system and the corresponding displacement of the magnet and output voltages of the coil were measured. It has been shown that the system displays linear behaviour at the primary resonance; however, at the principal parametric resonance, the motion characteristic of the magnet substantially changed displaying a strong softening-type nonlinearity. Theoretical simulations have also been conducted in order to verify the experimental results; the comparison between theory and experiment were within very good agreement of each other. The energy harvester developed in this paper is capable of harvesting energy close to the primary resonance as well as the principal parametric resonance; the frequency-band has been broadened significantly mainly due to the nonlinear effects as well as the parametric excitation.

Emission and operating performance of a biomethane tractor with dual fuel engine; Emissions- und Betriebsverhalten eines Biomethan-Traktors mit Zuendstrahlmotor

Energy Technology Data Exchange (ETDEWEB)

Mautner, Sebastian [Technologie- und Foerderzentrum (TFZ), Straubing (Germany); Emberger, Peter; Thuneke, Klaus; Remmele, Edgar

2016-08-01

The use of biomethane as fuel for agricultural machinery with dual fuel technology is contributing to climate protection and ensures safe fuel supply. So far, hardly any documented operational experiences are known. The aim of the project, funded by the Bavarian Ministry of Economic Affairs and Media, Energy and Technology, was to investigate practicability for daily use and the emission behaviour of a Valtra N101 prototype tractor (exhaust stage IIIA). The retrofitted dual-fuel technology of the former conventional diesel tractor simultaneously uses biomethane or natural gas and diesel as ignition fuel. During the field test over 590 working hours, the tractor showed overall high reliability. On average the operating range in dual-fuel mode with one complete filling of the gas tanks was about 11.5 hours. On the tractor test bench a significant improvement of the exhaust emissions could be observed, since the gas ECU had been optimized and changed by the manufacturer. For dual-fuel operation, nitrogen oxides (NO{sub x}) are lower, whereas carbon monoxide (CO), hydrocarbons (HC) and particulate matter emissions (PM) are higher compared to solely diesel operation. In particular, HC emissions exceed the proposed limiting value, submitted by the European Commission. This is due to incomplete gas combustion and insufficient conversion by the exhaust after-treatment-system (methane slip). A big potential for optimization is expected by adjusting the operating point-specific gasdiesel ratio and improving the exhaust gas aftertreatment system.

Generating a stationary infinite range tractor force via a multimode optical fibre

Science.gov (United States)

Ebongue, C. A.; Holzmann, D.; Ostermann, S.; Ritsch, H.

2017-06-01

Optical fibres confine and guide light almost unattenuated and thus convey light forces to polarizable nano-particles over very long distances. Radiation pressure forces arise from scattering of guided photons into free space while gradient forces are based on coherent scattering between different fibre modes or propagation directions. Interestingly, even scattering between co-propagating modes induces longitudinal forces as the transverse confinement of the light modes creates mode dependent longitudinal wave-vectors and photon momenta. We generalize a proven scattering matrix based approach to calculate single as well as inter-particle forces to include several forward and backward propagating modes. We show that an injection of the higher order mode only in a two mode fibre will induce a stationary tractor force against the injection direction, when the mode coupling to the lower order mode dominates against backscattering and free space losses. Generically this arises for non-absorbing particles at the centre of a waveguide. The model also gives improved predictions for inter-particle forces in evanescent nanofibre fields as experimentally observed recently. Surprisingly strong tractor forces can also act on whole optically bound arrays.

The use of fuzzy logic in quality control testing of automotive and tractor equipment

Directory of Open Access Journals (Sweden)

Korobko А.

2016-08-01

Full Text Available The article analyzes the relevance of the research topics, defines goals and objectives, subject and object of research. On the basis of the literature analysis, the following eduction was made: not all the test methods in road and agricultural vehicles (tractors contribute to the effective implementation of the requirements of normative documents including international, inter-laboratory comparative tests. The approach in laboratory testing to the synthesis adaptive system of metrological assurance the use of fuzzy logic is proposed. These labs conduct testing of automotive and tractor equipment. The decision is under risk. The scheme of metrological assurance system covers all parties to ensure the necessary accuracy of measurements and tests; the necessary normative-technical documentation is provided; availability of measuring instruments and test equipment, standards and reference measures; availability of qualified personnel; the assurance that test results are accurate (correct and precision; provides effective decisions based on objective information.

Design and development of polyamine polymer for harvesting microalgae for biofuels production

International Nuclear Information System (INIS)

Gupta, S.K.; Kumar, M.; Guldhe, A.; Ansari, F.A.; Rawat, I.; Kanney, K.; Bux, F.

2014-01-01

Highlights: • A low cost, high molecular weight cationic polymer was designed and developed for microalgal harvesting. • The polyamine polymer showed high flocculation efficiency for Scenedesmus sp. in comparison with chitosan and alum. • Such polymers could be preferred over other flocculants for microalgal harvesting for low value products such as biodiesel. • The polymer has not shown any deteriorating effect on lipid recovery and FAME profile of Scenedesmus sp. • Polyamine flocculant could be a cost effective option for harvesting of microalgal biomass for sustainable energy production. - Abstract: Research findings of the past few decades on the cultivation of microalgae for biodiesel production from laboratory to pilot scale microalgal cultivation have translated into empirical hope of developing an eco-friendly biofuel from algae. As far as economic sustainability is concerned, harvesting of microalgae is one of the most energy extensive processes and thus a major challenge, being faced by this industry. In our study, we designed and developed a quaternary ammonium salt based cationic polymer and evaluated its effectiveness for freshwater microalgae harvesting. An epichlorohydrin-n,n-diisopropylamine-dimethylamine polymer with high viscosity (1040 cps) was synthesized. The flocculation performance of this polyamine polymer was evaluated in terms of biomass recovery efficiency of microalgae (Scenedesmus sp.), its effect on lipid yield and composition. The results revealed that due to high molecular weight, the biomass recovery efficiency of the polymer was achieved >90% at a very small dose of 8 mg/L whereas similar biomass recovery efficiency of chitosan and alum were achieved at 80 and 250 mg/L respectively. The presence of functional quaternary amine and hydroxyl groups played an important role in electric charge neutralization of microalgal cells, hence the improved microalgal flocculation performance in comparison to the natural flocculants but

[Accident prevention in agriculture in the ASL1 Abruzzo Local Health Service: protection facilities for tractors].

Science.gov (United States)

Pompei, Domenico; Rossi, Roberta; Vecchiola, Rita; Angelone, Anna Maria; Fabiani, Leila

2015-07-08

The ASL1 workplace prevention and safety service in Abruzzo has been conducting workplace inspections on agricultural and livestock farms in the province of L'Aquila since 2011, mainly in the areas of Avezzano, Sulmona and L'Aquila. The agricultural sector in Abruzzo is characterized by high rates of accidents and the ratio of fatal injuries/total injuries is higher than the industry and services sector. To evaluate the presence or absence of safety devices , i.e. compliance or otherwise with regulations for tractors, and of any variable factor that could be associated with the safety of the vehicle. Between 2011 and 2013, 98 farms in the province of L'Aquila were inspected. The data resulting from the inspections was collected by the use of a checklist. An univariate logistic regression analysis was conducted in which the vehicles that complied with regulations were considered as the dependant variable, and the age of the tractor owner, the acres of worked land and the type of farm were considered as explanatory variables. Statistical elaboration was carried out using the Stata 12 programme. Out of a total of 298 tractors that were checked, 64.8% did not comply with regulations due to absence or unsuitability of one or more safety devices such as: a protective device in case of overturning; retention system of the driver; mounting and dismounting from the vehicle; protection of moving parts and hot parts; PTO (Power Take Off) protection device. A significant association between non-compliance of vehicles and the age of the owner and acres worked was observed, whereas no statistical significance was observed for the association with the farm type variable. Our study showed that farms where the owner's age is between 50 and 64 years and where more acres of land are worked are those where the agricultural or forestry tractors had lower levels of compliance with regulations.

Design and development of broadband piezoelectric vibration energy harvester based on compliant orthoplanar spring

Science.gov (United States)

Dhote, Sharvari

With advancement in technology, power requirements are reduced drastically for sensor nodes. The piezoelectric vibration energy harvesters generate sufficient power to low-powered sensor nodes. The main requirement of energy harvester is to provide a broad bandwidth. A conventional linear harvester does not satisfy this requirement. Therefore, the research focus is shifted to exploiting nonlinearity to widen the bandwidth of the harvester. Although nonlinear techniques are promising for broadening a bandwidth, reverse sweep shows reduced response as compared to the forward sweep. To overcome this issue, this thesis presents the design and development of a broadband piezoelectric vibration energy harvester based on a nonlinear multi-frequency compliant orthoplanar spring. This thesis is divided into three parts. The first part presents the design and experimental study of a tri-leg compliant orthoplanar spring for a broadband energy harvesting. The harvester performance is enhanced through the use of lightweight masses, which bring nonlinear vibration modes closer. The performance of the harvester is analyzed through development of a mathematical model based on the Duffing oscillator. The experimental and numerical results are in good agreement. The parametric study shows that an optimum performance is achieved by further reducing a gap in between the vibration modes using different weight masses. In the second part of the research, multiple (bi, quad and pent) leg compliant orthoplanar springs are designed to understand their role in expanding the bandwidth and reducing gap between vibration modes. The designed harvesters are compared by calculating the figure of merits. The quad-leg design provides a better performance in terms of power density and bandwidth among all the designs. The reverse sweep response is comparable to the forward sweep in terms of bandwidth. In the final part, a magnetic force is applied to the tri-leg harvester, which enhanced the voltage

Piezoelectric-based actuators for improved tractor-trailer performance (Conference Presentation)

Science.gov (United States)

Menicovich, David; Amitay, Michael; Gallardo, Daniele

2017-04-01

The application of piezo-electrically-driven synthetic-jet-based active flow control to reduce drag on tractor-trailers and to improve thermal mixing in refrigerated trailers was explored on full-scale tests. The active flow control technique that is being used relies on a modular system comprised of distributed, small, highly efficient actuators. These actuators, called synthetic jets, are jets that are synthesized at the edge of an orifice by a periodic motion of a piezoelectric diaphragm(s) mounted on one (or more) walls of a sealed cavity. The synthetic jet is zero net mass flux (ZNMF), but it allows momentum transfer to flow. It is typically driven near diaphragm and/or cavity resonance, and therefore, small electric input [O(10W)] is required. Another advantage of this actuator is that no plumbing is required. The system doesn't require changes to the body of the truck, can be easily reconfigured to various types of vehicles, and consumes small amounts of electrical power from the existing electrical system of the truck. The actuators are operated in a closed feedback loop based on inputs received from the tractor's electronic control unit, various system components and environmental sensors. The data are collected and processed on-board and transmitted to a cloud-based data management platform for further big data analytics and diagnostics. The system functions as a smart connected product through the interchange of data between the physical truck-mounted system and its cloud platform.

Dynamics calculation with variable mass of mountain self-propelled chassis

Directory of Open Access Journals (Sweden)

R.M. Makharoblidze

2016-12-01

Full Text Available Many technological processes in the field of agricultural production mechanization, such as a grain crop, planting root-tuber fruits, fertilizing, spraying and dusting, pressing feed materials, harvesting of various cultures, etc. are performed by the machine-tractor units with variable mass of links or processed media and materials. In recent years, are also developing the systems of automatic control, adjusting and control of technological processes and working members in agriculture production. Is studied the dynamics of transition processes of mountain self-propelled chassis with variable mass at real change disconnect or joining masses that is most often used in the function of movement (m(t = ctm(t = ct. Are derived the formulas of change of velocity of movement on displacement of unit and is defined the dependence of this velocity on the tractor and technological machine performance, with taking into account the gradual increase or removing of agricultural materials masses. According to the equation is possible to define a linear movement of machine-tractor unit. According to the obtained expressions we can define the basic operating parameters of machine-tractor unit with variable mass. The results of research would be applied at definition of characteristics of units, at development of new agricultural tractors.

Operational performance of the mechanized and semi-mechanized potato harvest Desempenho operacional da colheita mecanizada e semimecanizada de batata

Directory of Open Access Journals (Sweden)

João P. A. R. da Cunha

2011-01-01

Full Text Available Potato is an important crop plant throughout the world. Harvesting is a fundamental step in its production system. Maybe, it is the most complex and expensive operation. Thus, the objective of this work was to compare the cost of the mechanized and semi-mechanized harvest, the operational capacity and the production losses during the potato harvest process. The work was accomplished in a commercial farming, cultivated under pivot system, in the municipal district of Perdizes - MG, Brazil. A completely randomized design with two treatments was used: mechanized and semi-mechanized harvest. The mechanized harvest used a self-propelled harvester. In the semi-automated harvest, a digger mounted on tractor was used and the potato was manually harvested. It was concluded that the cost of mechanized harvest was 49.03% lower than the cost of semi-mechanized harvest. On average, the harvester had a work for 23 workers in manual harvest. Mechanized harvest showed losses of 2.35% of potato yield, while the semi-mechanized harvest showed losses of 6.32%.A batata é a cultura olerácea mais importante em todo o mundo. Dentre os processos que compõem seu sistema de produção, a colheita apresenta-se como etapa essencial, sendo uma das operações com maior custo agregado. O objetivo deste trabalho foi comparar a colheita mecanizada e semimecanizada da cultura da batata no que diz respeito aos custos, capacidade operacional e perdas de produção. O trabalho foi realizado em lavoura comercial, cultivada em área sob sistema de pivô central, no município de Perdizes-MG. O delineamento experimental utilizado foi o inteiramente casualizado, com dois tratamentos: colheita mecanizada e semimecanizada. A colheita mecanizada foi realizada utilizando-se de uma colhedora autopropelida. Na colheita semimecanizada, empregou-se um arrancador tratorizado seguido de catação manual. De acordo com os resultados, pôde-se concluir que o custo da colheita mecanizada foi 49

Harvest Date Influences Superficial Scald Development in Granny Smith Apples During Long Term Storage

OpenAIRE

ERKAN, Mustafa; PEKMEZCİ, Mustafa

2014-01-01

The effects of harvest dates on superficial scald development and postharvest quality in 'Granny Smith' apples (Malus domestica Borkh.) were investigated. Apples were harvested at 15-day intervals during 2 consecutive years (2000-2001) and stored at 0 °C with 90% relative humidity for 8 months. At the end of the 8 - month storage period plus an additional 1 week at 20 °C the percentage of superficial scald was lower (24.4%) in late harvested (November 15) apples than in ap...

Developing index maps of water-harvest potential in Africa

Science.gov (United States)

Senay, G.B.; Verdin, J.P.

2004-01-01

The food security problem in Africa is tied to the small farmer, whose subsistence farming relies heavily on rain-fed agriculture. A dry spell lasting two to three weeks can cause a significant yield reduction. A small-scale irrigation scheme from small-capacity ponds can alleviate this problem. This solution would require a water harvest mechanism at a farm level. In this study, we looked at the feasibility of implementing such a water harvest mechanism in drought prone parts of Africa. A water balance study was conducted at different watershed levels. Runoff (watershed yield) was estimated using the SCS curve number technique and satellite derived rainfall estimates (RFE). Watersheds were delineated from the Africa-wide HYDRO-1K digital elevation model (DEM) data set in a GIS environment. Annual runoff volumes that can potentially be stored in a pond during storm events were estimated as the product of the watershed area and runoff excess estimated from the SCS Curve Number method. Estimates were made for seepage and net evaporation losses. A series of water harvest index maps were developed based on a combination of factors that took into account the availability of runoff, evaporation losses, population density, and the required watershed size needed to fill a small storage reservoir that can be used to alleviate water stress during a crop growing season. This study presents Africa-wide water-harvest index maps that could be used for conducting feasibility studies at a regional scale in assessing the relative differences in runoff potential between regions for the possibility of using ponds as a water management tool. ?? 2004 American Society of Agricultural Engineers.

Development and Validation of an Enhanced Coupled-Field Model for PZT Cantilever Bimorph Energy Harvester

Directory of Open Access Journals (Sweden)

Long Zhang

2013-01-01

Full Text Available The power source with the limited life span has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means of converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, two previous models in the literatures for predicting the open-circuit and close-circuit voltages of a piezoelectric cantilever bimorph (PCB energy harvester are first described, that is, the mechanical equivalent spring mass-damper model and the electrical equivalent circuit model. Then, the development of an enhanced coupled field model for the PCB energy harvester based on another previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit and close-circuit voltages of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy-harvesting level of the system.

Contributed Review: Recent developments in acoustic energy harvesting for autonomous wireless sensor nodes applications

Science.gov (United States)

Khan, Farid Ullah; Khattak, Muhammad Umair

2016-02-01

Rapid developments in micro electronics, micro fabrication, ultra-large scale of integration, ultra-low power sensors, and wireless technology have greatly reduced the power consumption requirements of wireless sensor nodes (WSNs) and make it possible to operate these devices with energy harvesters. Likewise, other energy harvesters, acoustic energy harvesters (AEHs), have been developed and are gaining swift interest in last few years. This paper presents a review of AEHs reported in the literature for the applications of WSNs. Based on transduction mechanism, there are two types of AEHs: piezoelectric acoustic energy harvesters (PEAEHs) and electromagnetic acoustic energy harvesters (EMAEHs). The reported AEHs are mostly characterized under the sound pressure level (SPL) that ranges from 45 to 161 dB. The range for resonant frequency of the produced AEHs is from 146 Hz to 24 kHz and these produced 0.68 × 10-6 μW to 30 mW power. The maximum power (30 mW) is produced by a PEAEH, when the harvester is subjected to a SPL of 161 dB and 2.64 kHz frequency. However, for EMAEHs, the maximum power reported is about 1.96 mW (at 125 dB and 143 Hz). Under the comparable SPLs, the power production by the reported EMAEHs is relatively better than that of PEAEHs, moreover, due to lower resonant frequency, the EMAEHs are more feasible for the low frequency band acoustical environment.

Design, Fabrication and Performance Evaluation of an Inter-Row Cultivator for Sugarcane Fields

Directory of Open Access Journals (Sweden)

Yuttana Khaehanchanpong

2017-09-01

Full Text Available The aims of this research were to design and fabricate an inter-row cultivator for mounting on a medium-sized tractor (25.3 or 37.3 kW for sugarcane fields, and to assess the performance of the cultivator when harvesting is conducted either by hand or with a sugarcane harvester. Moreover, this study was also designed to assess the performance of the cultivator in mixing sugarcane residues in the field. The inter-row cultivator has a working width of 80 cm, a rotor shaft speed of 500 rpm, and a total weight of 518 kg. The cultivator comprises 18 European C-type blades attached to three disk holder flanges arranged in a spiral formation. Two notch-cutting discs were mounted on the front to cut and press the sugarcane leaves before they were chopped and mixed by the inter-row cultivator. The working performance test was conducted for different thicknesses of trash blankets while using the inter-row cultivator mounted on 25.3 kW- and 37.3 kW-size tractors. The effective field capacity for trash incorporation of the inter-row cultivator was 0.30 ha·h−1 when trash was left through harvesting by hand. On the other hand, effective field capacity was 0.31 ha·h−1 when a sugarcane harvester was used. Moreover, the field efficiency exceeded 90% in all tested fields, with greater soil inversion. The results also showed that the fuel consumption of both tractors was higher when harvesting by hand compared with harvesting using a harvester.

A new harvest operation cost model to evaluate forest harvest layout alternatives

Science.gov (United States)

Mark M. Clark; Russell D. Meller; Timothy P. McDonald; Chao Chi Ting

1997-01-01

The authors develop a new model for harvest operation costs that can be used to evaluate stands for potential harvest. The model is based on felling, extraction, and access costs, and is unique in its consideration of the interaction between harvest area shapes and access roads. The scientists illustrate the model and evaluate the impact of stand size, volume, and road...

Vibration energy absorption in the whole-body system of a tractor operator

OpenAIRE

Jan Szczepaniak; Wojciech Tanaś; Jacek Kromulski

2014-01-01

Many people are exposed to whole-body vibration (WBV) in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primari...

Bundling of harvesting residues and whole-trees and the treatment of bundles; Hakkuutaehteiden ja kokopuiden niputus ja nippujen kaesittely

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H; Seppaenen, V; Rinne, S

1997-12-31

The conditions on which the bundling of the harvesting residues from spruce regeneration fellings would become profitable were studied. The calculations showed that one of the most important features was sufficient compaction of the bundle, so that the portion of the wood in the unit volume of the bundle has to be more than 40 %. The tests showed that the timber grab loader of farm tractor was insufficient for production of dense bundles. The feeding and compression device of the prototype bundler was constructed in the research and with this device the required density was obtained.The rate of compaction of the dry spruce felling residues was about 40 % and that of the fresh residues was more than 50 %. The comparison between the bundles showed that the calorific value of the fresh bundle per unit volume was nearly 30 % higher than that of the dry bundle. This means that the treatment of the bundles should be done of fresh felling residues. Drying of the bundles succeeded well, and the crushing and chipping tests showed that the processing of the bundles at the plant is possible. The treatability of the bundles was also excellent. By using the prototype, developed in the research, it was possible to produce a bundle of the fresh spruce harvesting residues, the diameter of which was about 50 cm and the length about 3 m, and the rate of compaction over 50 %. By these values the reduction target of the costs is obtainable

Bundling of harvesting residues and whole-trees and the treatment of bundles; Hakkuutaehteiden ja kokopuiden niputus ja nippujen kaesittely

Energy Technology Data Exchange (ETDEWEB)

Kaipainen, H.; Seppaenen, V.; Rinne, S.

1996-12-31

The conditions on which the bundling of the harvesting residues from spruce regeneration fellings would become profitable were studied. The calculations showed that one of the most important features was sufficient compaction of the bundle, so that the portion of the wood in the unit volume of the bundle has to be more than 40 %. The tests showed that the timber grab loader of farm tractor was insufficient for production of dense bundles. The feeding and compression device of the prototype bundler was constructed in the research and with this device the required density was obtained.The rate of compaction of the dry spruce felling residues was about 40 % and that of the fresh residues was more than 50 %. The comparison between the bundles showed that the calorific value of the fresh bundle per unit volume was nearly 30 % higher than that of the dry bundle. This means that the treatment of the bundles should be done of fresh felling residues. Drying of the bundles succeeded well, and the crushing and chipping tests showed that the processing of the bundles at the plant is possible. The treatability of the bundles was also excellent. By using the prototype, developed in the research, it was possible to produce a bundle of the fresh spruce harvesting residues, the diameter of which was about 50 cm and the length about 3 m, and the rate of compaction over 50 %. By these values the reduction target of the costs is obtainable

Harvested wood products : basis for future methodological development

Science.gov (United States)

Kenneth E. Skog

2003-01-01

The IPCC Guidelines (IPCC 1997) provide an outline of how harvested wood could be treated in national greenhouse gas (GHG) inventories. This section shows the relation of that outline to the approaches and estimation methods to be presented in this Appendix. Wood and paper products are referred to as harvested wood products (HWP). It does not include carbon in...

A statistical description of the types and severities of accidents involving tractor semi-trailers

International Nuclear Information System (INIS)

Clauss, D.B.; Wilson, R.K.; Blower, D.F.; Campbell, K.L.

1994-06-01

This report provides a statistical description of the types and severities of tractor semi-trailer accidents involving at least one fatality. The data were developed for use in risk assessments of hazardous materials transportation. Several accident databases were reviewed to determine their suitability to the task. The TIFA (Trucks Involved in Fatal Accidents) database created at the University of Michigan Transportation Research Institute was extensively utilized. Supplementary data on collision and fire severity, which was not available in the TIFA database, were obtained by reviewing police reports for selected TIFA accidents. The results are described in terms of frequencies of different accident types and cumulative distribution functions for the peak contact velocity, rollover skid distance, fire temperature, fire size, fire separation, and fire duration

The Effects of the Tractor and Semitrailer Routing Problem on Mitigation of Carbon Dioxide Emissions

Directory of Open Access Journals (Sweden)

Hongqi Li

2013-01-01

Full Text Available The incorporation of CO2 emissions minimization in the vehicle routing problem (VRP is of critical importance to enterprise practice. Focusing on the tractor and semitrailer routing problem with full truckloads between any two terminals of the network, this paper proposes a mathematical programming model with the objective of minimizing CO2 emissions per ton-kilometer. A simulated annealing (SA algorithm is given to solve practical-scale problems. To evaluate the performance of the proposed algorithm, a lower bound is developed. Computational experiments on various problems generated randomly and a realistic instance are conducted. The results show that the proposed methods are effective and the algorithm can provide reasonable solutions within an acceptable computational time.

Operational performance of agricultural tractor in function of interior and metropolitano diesel mixture in mamona biodiesel

Energy Technology Data Exchange (ETDEWEB)

Tabile, Rubens Andre [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia; Lopes, Afonso; Toledo, Anderson de; Reis, Gustavo Naves dos; Silva, Rouverson Pereira da [Universidade Estadual Paulista (DER/UNESP), Jaboticabal, SP (Brazil). Dept. de Engenharia Rural

2008-07-01

The great demand for energy sources by production systems allied to scarcity of fossil fuels has motivated the development and production of biodiesel, this is a fuel produced from renewable sources. Given that, the objective of this study was to compare the operating performance of an agricultural tractor, operating with interior and metropolitano diesel mixed to mamona biodiesel, in seven proportions. The tests were conducted in the Departamento de Engenharia Rural of UNESP/Jaboticabal - SP. The results showed that the kind of diesel did influence fuel consumption, and diesel metropolitano showed best quality. It was also observed that as biodiesel proportion increased, fuel consumption increased as well. (author)

Development of a machine combination for harvesting of small wood first thinnings; Yhdistelmaekoneen kehittaeminen pienpuun korjuuseen sekae ensi- harvennukseen

Energy Technology Data Exchange (ETDEWEB)

Nevalainen, P [Outokummun Metalli Oy, Outokumpu (Finland)

1997-12-01

The aim of the project is to build combined machine for the harvesting of the first thinning, which makes both harvesting and forwarding. Original purpose has been extended to concern also the harvesting head itself, which is connected to the base machine and which is able to perform cutting, delimbing and transportation. This method is only meant to be used to harvest energy wood. It should be developed the crown cutting method for this device. The basic idea of this harvesting head is usable, but technical solutions of functions should be reconstructed. The `guillotine-cutting` is usable. The diameter of cut stem should be 250-300 mm. In the future we will try to develop a device, which is able to make also delimbing if needed. This head is proper for first thinning harvesting. (orig.)

Sistema de sincronismo entre a colhedora de cana-de-açúcar e o veículo de transbordo System of synchronism between sugar cane harvest machine and infield wagon

Directory of Open Access Journals (Sweden)

Paulo S. G. Magalhães

2008-06-01

Full Text Available Um dos problemas encontrados na colheita mecanizada da cana-de-açúcar é a falta de sincronismo entre a colhedora e o transbordo, ocasionando perdas tanto de material como de capacidade operacional. A presente pesquisa teve como objetivo desenvolver um sistema capaz de auxiliar no sincronismo entre a colhedora e o veículo de transbordo por meio de comunicação sem fio. Dois sensores de ultra-som acoplados ao elevador e um microprocessador gerenciam tais informações, gerando correta sincronia entre as máquinas. O sistema foi testado em laboratório e em campo, cumprindo corretamente a função de manter as máquinas em sincronia, indicando e alertando aos operadores as suas posições relativas. O sistema desenvolvido reduziu as perdas de rebolo em cerca de 60 kg ha-1, comparado com a colheita realizada com o sistema desligado.One of the problems found in mechanical harvest of sugar cane is the lack of synchronism between the harvest machine and the infield wagon, causing crop losses as well as operational capacity. The objective of the present research was to design a system capable of helping to synchronize the sugar cane harvest machine with the wagon. The communication between tractor and harvest machine is wireless. Two ultrasound sensors coupled to the elevator and a microprocessor manage such information, generating a correct synchronization among the machines. The system was tested in laboratory and on field performing its function adequately, maintaining the two machines in synchronization, indicating and alerting the operators their relative positions. The developed system reduced the sugar cane lost in 60 kg ha-1 comparing to the harvest with the system turned off.

Development and implementation of a dustfree and efficient pneumatic harvesting method; Poelyttoemaen ja tehokkaan imukokoamismenetelmaen kehittaeminen ja kaeyttoeoenotto

Energy Technology Data Exchange (ETDEWEB)

Nurminen, T; Ruokolainen, O; Rytkoenen, P.; Saastamoinen, V. [Vapo Oy, Jyvaeskylae (Finland); Kallio, M.; Aalto, J.; Leinonen, A.; Mehto, M. [VTT Energy, Jyvaeskylae (Finland)

1997-12-01

The overall aim of the research work (1995 - 1998) is to develop dust separators of the pneumatic harvester, to eliminate dust emissions and to plan and implement a more efficient pneumatic harvesting method. New JIK-35/96 pneumatic harvesters equipped with four secondary separating cyclones (17 units) were taken into use in spring 1996. In addition, 15 JIK-35 pneumatic harvesters constructed earlier were modified dustfree. The mechanical strength of the harvesters was improved by after-installations and by changing the drive method during harvesting. JIK-35/96 pneumatic harvester (test unit) was developed further during summertime. The greatest modification was testing of three secondary cyclones with a larger diameter. Dust separation of the larger cyclones was poorer than that of cyclones with a smaller diameter. In test runs, the test unit collected peat about 10 % more than the other harvesters of JIK-35 type. The fuel consumption of the test unit was about a fifth higher than that of the conventional JIK-35 harvester (20 vs 25 l/h). The larger pneumatic harvester, a prototype of 45 m{sup 3}, operated as a whole as expected. Exhaust air from the settling chamber of the harvester, and dust distributed well to the four parallel cyclones. Problems were high power demand and low pressure in the harvesting bin compared to those of JIK-35/96. The peat harvesting efficiency of the prototype was less than 2 kg/s m(m = nozzle of 1 m width), while the corresponding value of JIK-35/96 ranged 2.5 - 4 kg/s m. In continuation, the aim is to eliminate problems of the prototype and to construct a more efficient version, i.e., by enlarging the width

The use of fuzzy logic in quality control testing of automotive and tractor equipment

OpenAIRE

Korobko А.; Mykhailova О.; Nazarko О.; Radchenko Yu.

2016-01-01

The article analyzes the relevance of the research topics, defines goals and objectives, subject and object of research. On the basis of the literature analysis, the following eduction was made: not all the test methods in road and agricultural vehicles (tractors) contribute to the effective implementation of the requirements of normative documents including international, inter-laboratory comparative tests. The approach in laboratory testing to the synthesis adaptive system of metrological a...

Smoke opacity in agricultural tractor in function of interior and metropolitano diesel mixture in mamona biodiesel

Energy Technology Data Exchange (ETDEWEB)

Tabile, Rubens Andre [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia; Lopes, Afonso; Camara, Felipe Thomas da; Grotta, Danilo Cesar Checchio; Furlani, Carlos Eduardo Angeli [Universidade Estadual Paulista (DER/UNESP), Jaboticabal, SP (Brazil). Dept. de Engenharia Rural

2008-07-01

The great demand for energy sources by production systems allied to scarcity of fossil fuels has motivated the development and production of biodiesel, which is a fuel produced from renewable sources. Given that, the aim of this study was to compare smoke opacity of an agricultural tractor engine, working with metropolitano and interior diesel mixed to mamona biodiesel, in seven proportions. The tests were conducted in the Departamento de Engenharia Rural of UNESP/Jaboticabal - SP. The results showed that the diesel type did influence opacity of smoke, and metropolitano diesel showed best quality. It was also observed that, as biodiesel proportion increased, smoke opacity decreased until B75, turning to increase to B100. (author)

Matching design and performance analysis for driving system of solar garden tractor%太阳能园艺拖拉机驱动系统匹配设计与性能分析

Institute of Scientific and Technical Information of China (English)

张超; 朱思洪; 王军洋; 高辉松; 邓晓亭

2015-01-01

2 976 and 1 536 W⋅h in summer and winter, respectively. Taking the design of solar garden tractor as an example, and combined with the Nanjing regional hourly meteorological variation, the daily generating capacity was predicted using photovoltaic panels in different seasons, and the relationships between the speed of tractor and accumulated operation time throughout day were calculated under the ramp transportation operation, ramp grass cutting operation, horizontal transportation operation and horizontal grass cutting operation working conditions. The results showed that, with the increase of operating speed, the trend of cumulative operation time throughout day was shortened, which was due to the decrease of the actual battery discharge capacity with the increase of discharge current. Under the same conditions, the cumulative operation time throughout the day in summer was longer than in winter. When the speed was 3 km/h, for tractor horizontal grass cutting operation with solar, the accumulated operation time throughout day was 14.5 h, and for without solar the time was 9.5 h. When the speed was 3 km/h, for tractor ramp grass cutting operation with solar, the accumulated operation time throughout day was 5.9 h, and under the same speed without solar, the accumulated operation time throughout day was 3.8 h. It was obvious that using photovoltaic panels greatly extended the tractor’s accumulated operation time throughout day, which indicated that photovoltaic cell as garden tractor energy was feasible and also could meet the need of gardening works. The research results can be used for solar garden tractor driving system design and optimization, and provide the basis for the development of solar garden tractor.%针对太阳能园艺拖拉机驱动系统的独特需求，提出了一种太阳能园艺拖拉机驱动系统匹配设计方法，包括总体方案设计和主要参数的理论计算，并提出以全天累计作业时间为太阳能拖拉机�

Auxiliary brakes for trucks : research into the behaviour of a tractor-semi-trailer combination during emergency breaking.

NARCIS (Netherlands)

Dijks, A. Blijswijk, W.A.M. van Genugten, J. van Meeke, G.J.M. & Schlösser, L.H.M.

1976-01-01

The purpose of the research was to obtain an insight into various secondary braking systems for goods vehicles. Practical tests were carried out with a tractor- semi-trailer combination. The performance of various split braking systems as well as spring brake actuators are shown. With nearly all of

Tractor-mounted, GPS-based spot fumigation system manages Prunus replant disease

Directory of Open Access Journals (Sweden)

V. Udompetaikul

2013-10-01

Full Text Available Our research goal was to use recent advances in global positioning system (GPS and computer technology to apply just the right amount of fumigant where it is most needed (i.e., in a small target treatment zone in and around each tree replanting site to control Prunus replant disease (PRD. We developed and confirmed the function of (1 GPS-based software that can be used on cleared orchard land to flexibly plan and map all of an orchard's future tree sites and associated spot fumigation treatment zones and 2 a tractor-based GPS-controlled spot fumigation system to quickly and safely treat the targeted tree site treatment zones. In trials in two almond orchards and one peach orchard, our evaluations of the composite mapping and application system, which examined spatial accuracy of the spot treatments, delivery rate accuracy of the spot treatments, and tree growth responses to the spot treatments, all indicated that GPS spot fumigation has excellent potential to greatly reduce fumigant usage while adequately managing the PRD complex.

First investigation on the applicability of an active noise control system on a tracked tractor without cab

Directory of Open Access Journals (Sweden)

Daniele Pochi

2013-09-01

Full Text Available In last years, several research teams pointed their attention on the application of active noise control systems (ANC inside the cabs of agricultural tractor, with the purpose of reducing the driver exposition to noise, that is only partially controlled by the frame of the cab. This paper reports the results of a first experience that aimed at verifying the applicability of an ANC on a medium-high power, tracked tractor without cab. The tested tractor was a Fiat Allis 150 A, equipped with rear power take off, used in the execution of deep primary tillage in compact soils. It is a tracked tractor without cab, with maximum power of 108.8 kW at 1840 min–1 of the engine. The ANC consists of a control unit box based on a digital signal processor (DPS, two microphones, two speakers and a power amplifier. The instrumentation used in noise data collecting and processing consisted of a multichannel signal analyzer (Sinus - Soundbook, a ½” microphone capsule and an acoustic calibrator, both Bruel & Kjaer. The study aimed at evaluating the behaviour of the ANC by means of tests carried out under repeatable conditions, characterized by pre-defined engine speed values. Three replications have been made for each engine speed. The sampling time was 30 s. Two series of tests were performed in order to compare the results observed with the ANC on and off. The engine speed adopted in the study ranged from 600 min– 1, up to 2000 min–1 (maximum speed with steps of 100 min–1. The ANC proved to be effective in the interval of speed between 1400 and 1700 min–1, where the samplings have been intensified, adopting steps of 50 min–1. In such an interval, the attenuation observed with the ANC system on appeared evident both as weighed A sound pressure level (from 1.29 up to 2.46 dB(A and linear (from 4.54 up to 8.53 dB. The best performance has been observed at the engine speed of 1550 min–1, with attenuations, respectively of 2.46 dB(A and 7.67 d

An agricultural tractor test with different proportions of biodiesel; Ensaio de um trator agricola com diferentes proporcoes de biodiesel

Energy Technology Data Exchange (ETDEWEB)

Silva, Breno Alves; Castro, Douglas Lourenco de Souza; Volpato, Carlos Eduardo Silva; Barbosa, Jackson Antonio [Universidade Federal de Lavras (UFLA), MG (Brazil)

2009-07-01

The globalization of the economy bring as consequence the entry of new equipment and machinery highly competitive in terms of cost. This is the same reality of the Brazilian agricultural sector which today has new options for machines and implements very interesting from the standpoint of cost of acquisition. However, such equipment, due to its recent inclusion in the market, yet do not have parameters that relate to reliability. This work aimed to demonstrated the dynamometer test of an agricultural tractor, recently introduced in the market, to obtain their torque curves and specific fuel consumption using the fuel B{sub 2}, B{sub 5}, B{sub 2}0 and B{sub 1}00. The results showed that the tractor had satisfactory performance for all motor fuels, presenting the best performance with the use of B{sub 5} fuel. (author)

Harvesting of short rotation coppice. Harvesting trials with a cut and storage system in Germany

Energy Technology Data Exchange (ETDEWEB)

Schweier, J.; Becker, G.

2012-11-01

Short rotation coppice (SRC) harvesting techniques are available in Germany, but broad experience and knowledge about machine performance and the related effective costs of harvesting operations are still missing. This information is crucial, as harvesting costs strongly influence the economic performance of the overall supply chain. Therefore, it was the aim of this study to collect and analyze productivity data of different harvesting systems for SRC. The combined cut and chip system on the one hand and the cut and storage system on the other hand were studied by literature review. Several studies analyze the combined cut and chip systems and the reported machine productivities showed great variations. The average was 30 green tons per scheduled machine hour (gt smh{sup -1}). Few studies are analysing the cut and storage system. They report that machines still are under development and that further research is needed. Therefore, time studies of harvesting operations using the cut and storage system were carried out. Five trials were performed with the harvesting machine 'Stemster MK III' developed by Nordic Biomass. The share of productive working time was 85% and the average productivity was 21 gt smh{sup -1}. These results were compared with values from the literature. Resulting harvesting costs were calculated per oven dry ton (Euro odt{sup -1}). The advantages and disadvantages of both harvesting systems are highlighted. (orig.)

Heavy and Overweight Vehicle Brake Testing: Five-Axle Combination Tractor-Flatbed Final Report

Energy Technology Data Exchange (ETDEWEB)

Lascurain, Mary Beth [ORNL; Capps, Gary J [ORNL; Franzese, Oscar [ORNL

2013-10-01

The Federal Motor Carrier Safety Administration, in coordination with the Federal Highway Administration, sponsored the Heavy and Overweight Vehicle Brake Testing (HOVBT) program in order to provide information about the effect of gross vehicle weight (GVW) on braking performance. Because the Federal Motor Carrier Safety Regulations limit the number of braking system defects that may exist for a vehicle to be allowed to operate on the roadways, the examination of the effect of brake defects on brake performance for increased loads is also relevant. The HOVBT program seeks to provide relevant information to policy makers responsible for establishing load limits, beginning with providing test data for a combination tractor/trailer. This testing was conducted on a five-axle combination vehicle with tractor brakes meeting the Reduced Stopping Distance requirement rulemaking. This report provides a summary of the testing activities, the results of various analyses of the data, and recommendations for future research. Following a complete brake rebuild, instrumentation, and brake burnish, stopping tests were performed from 20 and 40 mph with various brake application pressures (15 psi, 25 psi, 35 psi, 45 psi, 55 psi, and full system pressure). These tests were conducted for various brake conditions at the following GVWs: 60,000, 80,000, 91,000, 97,000, 106,000, and 116,000 lb. The 80,000-lb GVWs included both balanced and unbalanced loads. The condition of the braking system was also varied. To introduce these defects, brakes (none, forward drive axle, or rear trailer axle) were made inoperative. In addition to the stopping tests, performance-based brake tests were conducted for the various loading and brake conditions. Analysis of the stopping test data showed the stopping distance to increase with load (as expected) and also showed that more braking force was generated by the drive axle brakes than the trailer axle brakes. The constant-pressure stopping test data

An automatic driving system for a Baker's garlic [Allium chinense] planter: Development of the infrared beam guidance system

International Nuclear Information System (INIS)

Tanaka, H.; Iwasaki, M.; Takeda, H.

2002-01-01

We have developed a tractor attachment type semi-automatic Baker's garlic (shallot) planter to save hard labor requirement during planting. The velocity of the tractor in operation is so slow (2 to 3m/min) that the tractor driver is forced to tie his hands for a long time. This is an obstacle to its diffusion, because farm managers have to drive their own tractors by themselves in most Japanese farmhouses, yet they have to do other jobs during the planting season. We designed a new automatic driving system that consists of one infrared beam radiator and two infrared beam receivers to solve this problem. The infrared radiator is located in front of the tractor and shows the infrared guideline of tractor path. The infrared receivers are equipped on the front of the tractor and detect the infrared from the radiator. The receivers are arranged symmetrically at 4.5 degree from the center of the tractor. So the misalignment of the tractor creates a difference in sensitivity and it is possible to distinguish the tractor direction against the infrared beam. This system was tested under the sand dune field conditions with the tractor that was converted to automatic driving. The results show the system can effectively steer about 80 m automatically with an almost straight path, and the error from the starting point is within 0.1 m

Development of post-harvest protocol of okra for export marketing.

Science.gov (United States)

Dhall, R K; Sharma, S R; Mahajan, B V C

2014-08-01

The study was carried out on the harvesting and handling methods of okra with the objective to maintain the best quality of pods from harvesting to end consumer especially for export marketing. For that purpose okra cv. 'Punjab-8' pods were harvested with minimum handling (least injuries to the pubescence on the ridges of pod) and normal handling (no safety taken to prevent injuries on pods). Pods were precooled at 15 ± 1ºC, 90-95% RH; jumble packed in the CFB boxes of 2.0 Kg capacity and than stored at 8 ± 1ºC, 90-95% RH. The quality parameters of okra namely texture, chlorophyll content, physiological loss in weight, rotting percentage and general appearance were studied. The pods harvested with minimum handling and field packaging can retain their green colour, crisp texture (maximum force to puncture pod = 500.2 g) with minimum rotting (3.0%) and physiological loss in weight (15.8%) and good appearance upto 13 days of cold storage whereas normal handled pods can be stored upto 5 days at 8 ± 1ºC, 90-95% RH and thereafter lost their general appearance on the 7th day of storage and were discarded. Therefore, in order to maintain high quality of okra from harvesting to the final destination (consumer), the okra pods should be harvested with minimum handling followed by field packaging in CFB boxes.

Design, Realization and First Tests of a Prototype of Mower-Conditioner to Harvest Fibre Sorghum through Haymaking

Energy Technology Data Exchange (ETDEWEB)

Assirelli, A.; Pari, L. (Consiglio per la Ricerca e la Sperimentazione in Agricoltura, Unita di Ricerca per l' Ingegneria Agraria, Monterotondo, RM (Italy))

2008-10-15

The baling of dried fibre sorghum introduces some specific problems due mostly to stalk development, height and rigidity and to the volume of green biomass to process. To improve storage and to reduce transport cost, the main aspect to consider is the achievement of a satisfactory natural drying of the plant on the ground. Previous tests with mowers and mower-conditioners pointed out operational problems: the mowers, in relation to height and rigidity of the stalks, showed low working capacity, while the mower-conditioners, both with rolls or spokes, were not able to obtain a conditioning level good enough to achieve sufficient natural drying. The structure of the plant, particularly of its stalk, is such that without a continuous cleavage along the whole length, water content decreases slower than it would be suitable for harvesting period in Italy. Following these considerations, CRA-ING developed a back mounted harvester prototype, connected to the rear three-point linkage of a reversible drive tractor. Such equipment permits the cutting and conditioning of the whole plant, leaving it spread on the ground, without forming windrows, so to make full use of the solar radiation for drying. When the water contents drops to the optimum value for storing, the product can be collected in windrow and then baled with existing round balers or big balers. The adopted conditioning system is formed by six couples of longitudinal rolls, similar to those used in corn harvesting, because also the fibre sorghum is a row cultivation; each roll is provided with alternate blades and pads to press and cleave all along the stalk while pulling down the plant. Rolls dimensions and rotational speed are such to hit the stalk every 5 cm. Under the rolls, next to the ground, a saw cuts the plants. During the first year tests in Central Italy, the idea was confirmed successful: it was possible, working at 5 km/h speed, corresponding to 1,5 ha/h effective working capacity, to windrow and to

Logging in hardwood stands established on farm land

International Nuclear Information System (INIS)

Bjoerheden, R.

1992-01-01

Performance and costs for different harvesting systems in broad leaf stands established on former tillage is presented. The calculations, combined with a forecast of the market development, shows that it is risky to aim production exclusively at bulk products as fibre or fibre/energy. The harvest of fibre or energy wood can, however, be used as a means to increase profitability of a silvicultural programme aimed at production of high quality hardwood lumber. Management and logging in these stands will be carried out with small scale technology, often by the private forest owner. Todays large scale systems are not competitive in these stands. The cost calculations show that we lack economically sound systems for harvesting stands in the interval up to 5 cm DBH. The lowest logging cost for these stands was calculated for motor manual felling and chipping with a chipper/dumper mounted on a farm tractor. This alternative is competitive also in the interval 5-10 cm DBH but there is a number of other feasible systems, e.g. off-road chippers processing motor manually felled and piled trees. Tree section systems with extraction by forwarder or a farm tractor with grapple loader and a bogic trailer operates at low costs to roadside but costs for processing and, maybe, a more expensive secondary transportation must then be added. For thinnings in the interval 10-25 cm DBH tree chipping is the most cost efficient if only energy assortments is to be harvested. However, at the current price relations between energy wood and pulpwood tree section systems are preferable also in stands over 10 cm since it allows a combined harvest of fibre and energy. For the same reason, the seemingly most interesting system in later thinnings is a system with differentiated processing. The term denotes a system where pulpwood is cut motor manually down to 12.5 cm and extracted by forwarder or farm tractor. The remaining tops and branches are processed by an off-road chipper. (36 refs., 11 figs.)

Vibration parameters assessment to develop a continuous lateral canopy shaker for mechanical harvesting of traditional olive trees

Energy Technology Data Exchange (ETDEWEB)

Sola-Guirado, R.R.; Jimenez-Jimenez, F.; Blanco-Roldan, G.L.; Castro-Garcia, S.; Castillo-Ruiz, F.J.; Gil Ribes, J.A.

2016-11-01

The fruit harvesting is a key factor involving both product quality and profitability. Particularly, mechanical harvesting of traditional oil olive orchards is hint by tree training system for manual harvesting, tree size and several and slanted trunks which makes difficult trunk shaker work. Therefore, canopy shaker technology could be a feasible alternative to develop an integral harvester able to work on irregular canopies. The aim of this research was to determine vibration parameters applied to the olive tree for efficient mechanical harvesting by canopy shaker measuring fruit removal efficiency and debris. In this work, a continuous lateral canopy shaker harvester has been developed and tested on large olive trees in order to analyse the operating harvester parameters and tree properties to improve mutual adaptation. Vibration amplitude and frequency, rod density and ground speed were assessed. Vibration amplitude and frequency beside ground speed were decisive factors on fruit removal efficiency. Increasing rod density has not influenced on removal efficiency although it increased significantly debris. Promising results has been reached with 77.3% of removal efficiency, applying a 28 s shaking duration, 0.17 m amplitude vibration and 12 rod drum. This result was obtained reporting 0.26 s of accumulative shaking time over 200 m/s2 resultant acceleration. The canopy shaker mechanism enabled more than 65% of detached fruits to fall vertically, facilitating catch fruit. In order to improve removal efficiency it is advisable to adapt trees, set high amplitude in the shaker mechanism, and enhance the contact time between rods and tree. (Author)

Design of a New Sensor for Determination of the Effects of Tractor Field Usage in Southern Spain: Soil Sinkage and Alterations in the Cone Index and Dry Bulk Density

Directory of Open Access Journals (Sweden)

Diego L. Valera

2012-10-01

Full Text Available Variations in sinkage and cone index are of crucial importance when planning fieldwork, and for determining the trafficability of farm machinery. Many studies have highlighted the link between higher values of these parameters and dramatic decreases in crop yield. Variations in the dry bulk density and cone index of clayey soil in Southern Spain were measured following each of five successive passes over the same land with the three types of tractor most widely used in the area (tracked, two-wheel drive and four-wheel drive. In addition, sinkage (rut depth of the running gear was measured using a laser microrelief profile meter. This device, which integrates three sensors, was specifically designed for these experiments, as was an electrical penetrometer to determine the cone index, and both instruments proved reliable and accurate in the field. The main goal of this study was to design, manufacture and test these new devices. The first pass caused most soil alteration when compared to successive passes for all types of tractor tested and soil conditions prevailing during the tests. (Heavier four-wheel drive tractors were found to cause greater soil damage (sinkage, cone index and dry bulk density than two-wheel drive and track tractors. There was no statistically significant difference between the two latter types. The greatest alterations were recorded in the top 10 cm of the soil. The results show that soil compaction should be avoided as much as possible. This can be achieved by ensuring that tractors always travel along the same tracks, especially in the wet season. At present these aspects are not considered by farmers in this area.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-06-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-02-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Influence of biofuels usage in internal combustion engines of agricultural tractors on output parametrs

Directory of Open Access Journals (Sweden)

Tomáš Šmerda

2010-01-01

Full Text Available Application of alternative fuels brings the social benefits in terms of reducing dependence on oil industry and its products as well as decreasing of damage of the environment together with using of na­tu­ral resources, especially in field of renewable energy resources. The use of biofuels is the most important part of energy strategy in European Union, whose member states have agreed the content of biofuels will achieve 5.75% of the total energy sum of fuel for transport purposes in 2010. Operation of internal combustion engine fueled by RME brings environmental benefits as described several authors in analysis of the life cycle. The contribution deals with technical difficulties of the RME usage in internal combustion engine used in agricultural tractors. Different fuel causes different process of combustion which means changes in output power and pollution. The aim of this experiment was to determine these effects. Experimental work was divided into two parts according to various fuel systems. The first tractor was equipped with mechanical injection system, the second one was provided with common-rail fuel system. The test procedures consisted of measurement of power- torque curves where the engine load was created by Eddy current dynamometer. Exhaust gas analyzer sampled the pollution of carbon monoxide, carbon dioxide and hydrocarbons as the most important indicators of combustion process.

Dust emissions eliminated in pneumatic harvesting

International Nuclear Information System (INIS)

Kallio, M.

1998-01-01

Pneumatic harvesting is the most efficient milled peat production method in unsteady weather conditions. In good summers, the best contractors harvest more than 1 000 m 3 /ha milled peat from suitable production fields. The greatest problem of the method is caused by dust emissions, in particular in fields close to settled areas. About 15 % of Finland's present peat production is collected using pneumatic harvesters. A pneumatic harvester with smaller dust emissions has been developed by VTT Energy and Vapo Oy. The wagon is based on two-stage separation of peat. The main part of the coarser milled peat is first separated, e.g. in a settling chamber, and fine dry peat dust in correctly dimensioned side by side cyclones. The first series of pneumatic harvesters based on the new separation technology was employed in summer 1996. Besides decreasing the dust emissions the harvesting capacity of the new equipment was increased. The collection capacity of the pneumatic harvester can be made more effective by enlarging the container size, be decreasing the weight, by increasing the driving speed and by developing the suction capacity. Using lighter and durable construction materials combined with advanced design lighter and stronger pneumatic harvesters have been constructed. Nozzles and their mounting have also been developed. In the improvement of nozzles, the former studies with pneumatic simulator of VTT Energy, have been of great help. Studies with the pneumatic simulator and field conditions have been made in collaboration with Turveruukki Oy, Turvemetalli Oy, Raussin Metalli Oy and Vapo Oy, as well as VNIITP of St. Petersburg, Russia

Approaches to automated protein crystal harvesting

Energy Technology Data Exchange (ETDEWEB)

Deller, Marc C., E-mail: mdeller@scripps.edu; Rupp, Bernhard, E-mail: mdeller@scripps.edu

2014-01-28

Approaches to automated and robot-assisted harvesting of protein crystals are critically reviewed. While no true turn-key solutions for automation of protein crystal harvesting are currently available, systems incorporating advanced robotics and micro-electromechanical systems represent exciting developments with the potential to revolutionize the way in which protein crystals are harvested.

Rainwater harvesting potential for farming system development in a hilly watershed of Bangladesh

Science.gov (United States)

Tariqul Islam, Md.; Mohabbat Ullah, Md.; Mostofa Amin, M. G.; Hossain, Sahadat

2017-09-01

Water resources management is an important part in farming system development. Agriculture in Chittagong Hill Tracts of Bangladesh is predominantly rainfed with an average 2210 mm monsoonal rain, but rainfall during dry winter period (December-February) is inadequate for winter crop production. The natural soil water content (as low as 7 %) of hillslope and hilltop during the dry season is not suitable for shallow-rooted crop cultivation. A study was conducted to investigate the potential of monsoonal rainwater harvesting and its impact on local cropping system development. Irrigation facilities provided by the managed rainwater harvesting reservoir increased research site's cropping intensity from 155 to 300 %. Both gravity flow irrigation of valley land and low lift pumping to hillslope and hilltop from rainwater harvesting reservoir were much more economical compared to forced mode pumping of groundwater because of the installation and annual operating cost of groundwater pumping. To abstract 7548 m3 of water, equivalent to the storage capacity of the studied reservoirs, from aquifer required 2174 kWh energy. The improved water supply system enabled triple cropping system for valley land and permanent horticultural intervention at hilltop and hillslope. The perennial vegetation in hilltop and hillslope would also conserve soil moisture. Water productivity and benefit-cost ratio analysis show that vegetables and fruit production were more profitable than rice cultivation under irrigation with harvested rainwater. Moreover, the reservoir showed potentiality of integrated farming in such adverse area by facilitating fish production. The study provides water resource managers and government officials working with similar problems with valuable information for formulation of plan, policy, and strategy.

Computational Flow Modeling of a Simplified Integrated Tractor-Trailer Geometry

International Nuclear Information System (INIS)

Salari, K.; McWherter-Payne, M.

2003-01-01

For several years, Sandia National Laboratories and Lawrence Livermore National Laboratory have been part of a consortium funded by the Department of Energy to improve fuel efficiency of heavy vehicles such as Class 8 trucks through aerodynamic drag reduction. The objective of this work is to demonstrate the feasibility of using the steady Reynolds-Averaged Navier-Stokes (RANS) approach to predict the flow field around heavy vehicles, with special emphasis on the base region of the trailer, and to compute the aerodynamic forces. In particular, Sandia's computational fluid dynamics code, SACCARA, was used to simulate the flow on a simplified model of a tractor-trailer vehicle. The results are presented and compared with NASA Ames experimental data to assess the predictive capability of RANS to model the flow field and predict the aerodynamic forces

Development and application of remote video monitoring system for combine harvester based on embedded Linux

Science.gov (United States)

Chen, Jin; Wang, Yifan; Wang, Xuelei; Wang, Yuehong; Hu, Rui

2017-01-01

Combine harvester usually works in sparsely populated areas with harsh environment. In order to achieve the remote real-time video monitoring of the working state of combine harvester. A remote video monitoring system based on ARM11 and embedded Linux is developed. The system uses USB camera for capturing working state video data of the main parts of combine harvester, including the granary, threshing drum, cab and cut table. Using JPEG image compression standard to compress video data then transferring monitoring screen to remote monitoring center over the network for long-range monitoring and management. At the beginning of this paper it describes the necessity of the design of the system. Then it introduces realization methods of hardware and software briefly. And then it describes detailedly the configuration and compilation of embedded Linux operating system and the compiling and transplanting of video server program are elaborated. At the end of the paper, we carried out equipment installation and commissioning on combine harvester and then tested the system and showed the test results. In the experiment testing, the remote video monitoring system for combine harvester can achieve 30fps with the resolution of 800x600, and the response delay in the public network is about 40ms.

Review of magnetostrictive vibration energy harvesters

Science.gov (United States)

Deng, Zhangxian; Dapino, Marcelo J.

2017-10-01

The field of energy harvesting has grown concurrently with the rapid development of portable and wireless electronics in which reliable and long-lasting power sources are required. Electrochemical batteries have a limited lifespan and require periodic recharging. In contrast, vibration energy harvesters can supply uninterrupted power by scavenging useful electrical energy from ambient structural vibrations. This article reviews the current state of vibration energy harvesters based on magnetostrictive materials, especially Terfenol-D and Galfenol. Existing magnetostrictive harvester designs are compared in terms of various performance metrics. Advanced techniques that can reduce device size and improve performance are presented. Models for magnetostrictive devices are summarized to guide future harvester designs.

Development of a piezoelectric energy harvesting system for implementing wireless sensors on the tires

International Nuclear Information System (INIS)

Lee, Jaeyun; Choi, Bumkyoo

2014-01-01

Highlights: • This study is focused on a stable energy source independent of vehicle speed. • It is ascertained that the use of a strain field is suitable for this purpose. • A piezo patch generates 380.2 μJ per revolution under 500 kgf load and 60 km/h. • A self-powered wireless sensor system is manufactured for application and tested during vehicle driving. • The system is applicable to intelligent tire sensor systems. - Abstract: The need for energy harvesting technology is steadily growing in the field of self-powered wireless sensor systems for intelligent tires. The purpose of this study is to mount an energy harvester inside the tire. In order to achieve this, we focus on a stable energy source almost independent of vehicle speed. It is ascertained that the use of a strain field is suitable for this purpose. In order to develop the energy harvester for the tire, modeling of tire behavior has been performed and verified through comparing with experimental results. From the results, a piezoelectric energy harvester generates 380.2 μJ per revolution under 500 kgf load and 60 km/h. A self-powered wireless sensor system is manufactured for application and tested during vehicle driving. The result of this study presents 1.37 μW/mm 3 of power generation from the performance of the energy harvester. This study concludes that the system is applicable to wireless tire sensor systems after making minor improvements

Engineering developments for small-scale harvest, storage and combustion of woody crops in Canada

Energy Technology Data Exchange (ETDEWEB)

Savoie, P.; Ouellet-Plamondon, C.; Morissette, R.; Preto, F. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

2010-07-01

Although wood remains an important source of energy for cooking and heating in developing countries, it has been largely replaced by fossil fuels, nuclear energy and hydroelectric power in developed countries. Given the need to diversify sources of energy, wood energy is being revitalized in developed countries. This paper reported on a current research program on woody crops at Agriculture and Agri-Food Canada. The research involves the development of a woody crop harvester to collect small size trees in plantations as well as in natural growth. The harvested package is a small round bale that enables natural drying from about 50 per cent moisture at harvest, down to 30 and 20 per cent after 4 to 6 months of storage outside and under shelter, respectively. The combustion value of woody crops averaged 19.4 GJ/t on a dry matter basis with little variation. The woody crops can be pulverized into fine particles, dried artificially to 10 per cent moisture content and processed into pellets for combustion. In a practical trial, more than 7.5 MJ/t DM were needed to produce pellets without providing more energy than coarse wood chips. The rural applications for this biomass include heating community and farm buildings and drying crops. These applications can use locally grown woody crops such as willow, or forest residues such as branches and bark in the form of chips to replace fossil energy sources.

Compaction of loamy soils due to tractor traffic in vineyards and orchards and its effect on infiltration in southern France

NARCIS (Netherlands)

Dijck, van S.J.E.; Asch, van T.W.J.

2002-01-01

Viticulture and fruit culture in Mediterranean areas demand frequent tractor traffic in vineyards and orchards for tillage and for the application of herbicides and pesticides, resulting in soil compaction. The aim of this study was to investigate theextent of soil compaction and its effect on

Development of multi-functional nano-paint for energy harvesting applications

Directory of Open Access Journals (Sweden)

Bir B. Bohara

2018-02-01

Full Text Available The multi-functionality of lead magnesium niobate-lead titanate/paint (PMN-PT/paint nanocomposite films for energy harvesting via piezoelectric and pyroelectric effects is described. PMN-PT/paint films have been fabricated by a conventional paint-brushing technique to provide a low-cost, low-temperature and low–energy route to create multi-functional films. The properties investigated included dielectric constants, ε' and ε'', as a function of temperature, frequency and composition. From these parameters, it is indicated that the dielectric constants and AC conductivity (σAC increase with an increase of filler content and temperature, implying an improvement of the functionality of the films. The results revealed that σAC obeyed the relation σAC = Aωs, and exponent s, was found to decrease by increasing the temperature. The correlated barrier hopping was the dominant conduction mechanism in the nanocomposite films. The efforts were made to investigate the performance of nanocomposite films to mechanical vibrations and thermal variations. A cantilever system was designed and examined to assess its performance as energy harvesters. The highest output voltage and power for a PMN-PT/paint based harvester with a broad frequency response operating in the -31-piezoelectric mode were 65 mV and 1 nW, respectively. Voltage and power were shown to be enhanced by application of thermal variations. Thus, films could be utilized for combined energy harvesting via piezoelectric and pyroelectric characteristics. Keywords: Dielectric, Pyroelectricity, Piezoelectricity, Nanocomposites, PMN-PT, Energy harvesting

Computer Vision for Timber Harvesting

DEFF Research Database (Denmark)

Dahl, Anders Lindbjerg

The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

Power harvesting in helicopter rotorblades

NARCIS (Netherlands)

de Jong, Pieter; de Boer, Andries; Loendersloot, Richard; van der Hoogt, Peter

2010-01-01

Current power harvesting research has focused on bending beams and determining power output under a given excitation. For the European CleanSky – Green Rotor Craft project a tool is being developed which optimizes the piezoelectric material and placement thereof for power harvesting. It focuses on

Cantilever piezoelectric energy harvester with multiple cavities

International Nuclear Information System (INIS)

S Srinivasulu Raju; M Umapathy; G Uma

2015-01-01

Energy harvesting employing piezoelectric materials in mechanical structures such as cantilever beams, plates, diaphragms, etc, has been an emerging area of research in recent years. The research in this area is also focused on structural tailoring to improve the harvested power from the energy harvesters. Towards this aim, this paper presents a method for improving the harvested power from a cantilever piezoelectric energy harvester by introducing multiple rectangular cavities. A generalized model for a piezoelectric energy harvester with multiple rectangular cavities at a single section and two sections is developed. A method is suggested to optimize the thickness of the cavities and the number of cavities required to generate a higher output voltage for a given cantilever beam structure. The performance of the optimized energy harvesters is evaluated analytically and through experimentation. The simulation and experimental results show that the performance of the energy harvester can be increased with multiple cavities compared to the harvester with a single cavity. (paper)

The U.S. Department of Labor's Tractor and Machinery Certification Program: management styles and perceptions held by community stakeholders and instructors.

Science.gov (United States)

Jepsen, S D

2012-07-01

A mixed-mode, descriptive study was conducted on the U.S. Department of Labor's (DOL) Tractor and Machinery Certification Program. Legislated by the Fair Labors Standards Act, the Hazardous Occupations Order in Agriculture (HOOA) was enacted in 1968 as a public policy measure to reduce the number of injuries to youth on farms. An educational exemption allows youth 14 and 15 years of age to work for hire after they successfully complete a training program. In the 40+ years since the legislation went into effect prescribing such training exemptions, deficiencies and variations have occurred in the quality of the educational program and the system by which agencies certify young people. To gain a better understanding of the DOL Tractor and Machinery Certification program, community stakeholders were asked to identify management practices, curriculum resources, and perceptions of the DOL program. The study design used qualitative data from 49 agricultural representatives participating in regional focus groups and quantitative data from 330 community instructors responding to an electronic-formatted questionnaire (representing a 70.7% response rate) in an effort to answer the question: "What is the current status of the DOL Tractor and Machinery Certification program in the United States?" The findings revealed that 55.2% of the instructors taught a qualifying DOL program. Of these, the certification was administered through an Extension or 4-H program (68.7%), an agricultural education program (24.7%), or as a combination of Extension and agricultural education (6.0%). Course instructors believed the training was beneficial to students and had opportunity to attract more students than currently enrolled These instructors placed a higher value on standardized teaching materials than on standardized testing procedures; they also supported the need for additional teaching aids, which included hands-on activities, videotapes, student workbooks, and DVDs. Study participants

Nano/microscale pyroelectric energy harvesting: challenges and opportunities

Directory of Open Access Journals (Sweden)

Devashish Lingam

2013-12-01

Full Text Available With the ever-growing demand for renewable energy sources, energy harvesting from natural resources has gained much attention. Energy sources such as heat and mechanical motion could be easily harvested based on pyroelectric, thermoelectric, and piezoelectric effects. The energy harvested from otherwise wasted energy in the environment can be utilized in self-powered micro and nano devices, and wearable electronics, which required only µW–mW power. This article reviews pyroelectric energy harvesting with an emphasis on recent developments in pyroelectric energy harvesting and devices at micro/nanoscale. Recent developments are presented and future challenges and opportunities for more efficient materials and devices with higher energy conversion efficiency are also discussed.

Steering a Tractor by Means of an EMG-Based Human-Machine Interface

Directory of Open Access Journals (Sweden)

Sergio Alonso-Garcia

2011-07-01

Full Text Available An electromiographic (EMG-based human-machine interface (HMI is a communication pathway between a human and a machine that operates by means of the acquisition and processing of EMG signals. This article explores the use of EMG-based HMIs in the steering of farm tractors. An EPOC, a low-cost human-computer interface (HCI from the Emotiv Company, was employed. This device, by means of 14 saline sensors, measures and processes EMG and electroencephalographic (EEG signals from the scalp of the driver. In our tests, the HMI took into account only the detection of four trained muscular events on the driver’s scalp: eyes looking to the right and jaw opened, eyes looking to the right and jaw closed, eyes looking to the left and jaw opened, and eyes looking to the left and jaw closed. The EMG-based HMI guidance was compared with manual guidance and with autonomous GPS guidance. A driver tested these three guidance systems along three different trajectories: a straight line, a step, and a circumference. The accuracy of the EMG-based HMI guidance was lower than the accuracy obtained by manual guidance, which was lower in turn than the accuracy obtained by the autonomous GPS guidance; the computed standard deviations of error to the desired trajectory in the straight line were 16 cm, 9 cm, and 4 cm, respectively. Since the standard deviation between the manual guidance and the EMG-based HMI guidance differed only 7 cm, and this difference is not relevant in agricultural steering, it can be concluded that it is possible to steer a tractor by an EMG-based HMI with almost the same accuracy as with manual steering.

Characterization of Piezoelectric Energy Harvesting MEMS

Science.gov (United States)

2015-12-01

of previously fabricated MEMS piezoelectric energy harvesters and use the results to optimize an advanced finite element model to be used in...possibilities of using solar power and the piezoelectric effect to harvest energy [12]. The design goal was to develop an energy harvester with a resonant... The piezoelectric properties of AlN are also relatively constant over a wide range of temperatures [7]. AlN was further characterized

Fuel consumption of tractor for different soil types in semi-arid regions; Consumo de combustivel de um trator agricola para diferentes tipos de solo em regioes semi-aridas

Energy Technology Data Exchange (ETDEWEB)

Montanha, Gustavo K. [Universidade Estadual Paulista (FAC/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural], E-mail: gmontanha@fca.unesp.br; Guerra, Saulo P.S. [Universidade Estadual Paulista (UNESP), Botucatu, SP (Brazil). Dept. de Gestao e Tecnologia Agroindustrial; Andrade-Sanchez, Pedro; Heun, John [The University of Arizona, Maricopa, AZ (United States); Monteiro, Leonardo A. [The University of Arizona (MAC/UA), Maricopa, AZ (United States). Maricopa Agricultural Center

2010-07-01

The appropriate use of agricultural machinery enables greater operational efficiency and higher productivity for the farmer. Some factors such as soil type can influence the fuel consumption, one of the biggest costs. This study aimed to compare the fuel consumption of a tractor operating in two different conditions of soil in semi-arid regions. The area used for testing is located in the city of Maricopa, in Arizona, belonging to 'The University of Arizona'. The area 1 is classified as sandy clay loam soil (52% sand, 35% clay, 13% silt). The area 2 is classified as a sandy loam soil (71% sand, 12% clay and 17% silt). The tractor 4 x 2 TDA, with 88 kw (120 hp) engine power equipped with auto pilot system and an implement for tillage were used in the experiment. A data acquisition system was installed in the tractor to collect the data generated by the GPS and fuel consumption sensor. The results showed significant statistical difference in fuel consumption between soil textures. (author)

Desenvolvimento de equipamento motorizado para aplicação líquida de produtos fitossanitários na cultura do café Development of a walk behind tractor for spraying coffee trees

Directory of Open Access Journals (Sweden)

Tomás K. Matuo

2008-09-01

Full Text Available O trabalho teve como objetivo desenvolver um protótipo aplicador de líquidos na superfície do solo para cafezais localizados em regiões de topografia acidentada ou cultivados em sistema de plantio adensado. O protótipo do aplicador construído é um trator de rabiças acionado por um motor de dois tempos a gasolina, de 2,61 kW (3,5 cv, com duas rodas motrizes com bitola de 0,60 m e uma terceira roda direcional, equipado com sistema de pulverização dotado de depósito de 40 L, bomba centrífuga, filtros de linha, regulador de pressão, manômetro, mangueiras, válvulas e suporte de bicos. Para avaliar a eficiência do protótipo, foram instalados dois experimentos de campo em São Sebastião do Paraíso - MG (2003 e 2004, onde foram aplicados inseticidas sistêmicos para o controle da cigarra. Os métodos de aplicação avaliados foram: aplicação em faixa, filete, "drench" contínuo e "drench" intermitente. O protótipo aplicador de líquidos à superfície do solo atendeu aos objetivos propostos, visto que conseguiu realizar o controle químico de cigarras com destaque para a aplicação em "drench" contínuo. O protótipo, se equipado para aplicar simultaneamente nos dois lados da planta, apresentará capacidade de campo operacional semelhante à do equipamento tratorizado.The present research aimed to develop a motorized sprayer for coffee plantations located in sloping areas or planted in a high density planting system. The equipment developed is a walk behind tractor powered by a 2.61 kW (3.5 cv two-stroke engine, clearance of 0.60 m between two driving wheels, having a third directional wheel, equipped with spray system composed by a 40 L hopper, centrifugal pump, line filters, pressure regulator and gauge, hoses, valves and nozzles. Evaluations of the prototype were made in two field tests in São Sebastião do Paraíso - MG, Brazil (2003 and 2004, applying systemic insecticides to control the coffee cicadas. The application

Presentation of the Well Tractor Concept and practical experience in extreme conditions; Vorstellung des Well Tractor Konzepts mit Erfahrungen bei Einsaetzen unter Extrembedingungen

Energy Technology Data Exchange (ETDEWEB)

Kater, H.; Preiss, F. [Preussag Wireline- und Messservice, Edemissen (Germany)

1998-12-31

So-called extended reach boreholes with horizontal sections of more than 2000 m, short radius drilling, multilaterals and other variations are common enough. Problems occur when this type of borehole needs to be surveyed or modified. The contribution describes the newly developed ``Well Tracotor{sup circledR}`` technology and outlines its potential. (orig.) [Deutsch] Sogenannte Extended Reach Bohrungen mit Horizontalsektionen von mehr als 2.000 Meter Laenge, Short Radius Drilling, Multilaterals und andere Variationen sind bohrtechnisch einwandfrei durchfuehrbar und gehoeren zum gaengigen Repertoire der Bohrfirmen. Grosse Probleme entstehen jedoch wenn dieser Bohrungstyp vermessen, komplettiert oder aufgewaeltigt werden soll. Insbesondere Bohrlochmessfirmen haben es in den letzten ca. 20 Jahren versaeumt Innovationen zwecks oekonomischen Einsatzes ihrer Technologie in diesen Bohrungen bereitzustellen. Die Durchfuehrung von Perforationen und Bohrlochmessungen, das Setzen von Stopfen, Schneiden von Rohren und auch einfachste Slickline-Operationen sind bei einer Bohrlochneigung beginnend bei ca. 60 bis 80 nur unter Anwendung von kosten- und zeitintensiven Verfahren moeglich. Eine guenstige Alternative zu diesen Verfahren bietet der Well Tractor. Diese Technologie ermoeglicht das Einfahren von Geraeten, die ueblicherweise am Kabel oder Draht eingesetzt werden, in Horizontalbohrungen. Im Folgenden werden das technische Konzept, ein Vergleich mit alternativen Verfahren, und verschiedene Referenzen des Well Tracotors {sup trademark} dargestellt. Weiterhin wird auf die Modifikationen eingegangen, die noetig waren, um dieses Geraet den Gegebenheiten in tiefen, heissen Gasbohrungen anzupassen. Abschliessend soll durch einen Ausblick auf zum Teil schon im Feldtest befindliche Weiterentwicklungen das weitere Potential dieser Technologie aufgezeichnet werden. (orig.)

The development of two Broadband Vibration Energy Harvesters (BVEH) with adaptive conversion electronics

Science.gov (United States)

Clingman, Dan J.; Thiesen, Jack

2017-04-01

Historically, piezoelectric vibration energy harvesters have been limited to operation at a single, structurally resonant frequency. A piezoceramic energy harvester, such as a bimorph beam, operating at structural resonance exchanges energy between dynamic and strain regimes. This energy exchange increases the coupling between piezoceramic deformation and electrical charge generation. Two BVEH mechanisms are presented that exploit strain energy management to reduce inertial forces needed to deform the piezoceramic, thus increasing the coupling between structural and electrical energy conversion over a broadband vibration spectrum. Broadband vibration excitation produces a non-sinusoidal electrical wave form from the BVEH device. An adaptive energy conversion circuit was developed that exploits a buck converter to capture the complex waveform energy in a form easily used by standard electrical components.

Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header

Energy Technology Data Exchange (ETDEWEB)

Eisenbies, Mark [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Volk, Timothy [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Abrahamson, Lawrence [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Shuren, Richard [GreenWood Resources, Inc., Portland, OR (United States); Stanton, Brian [GreenWood Resources, Inc., Portland, OR (United States); Posselius, John [Case New Holland, New Holland, PA (United States); McArdle, Matt [Mesa Reduction Engineering and Processing, Inc., Auburn, NY (United States); Karapetyan, Samvel [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Patel, Aayushi [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Shi, Shun [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States); Zerpa, Jose [State Univ. of New York College of Environmental Science and Forestry (SUNY-ESF), Syracuse, NY (United States)

2014-10-03

Biomass for biofuels, bioproducts and bioenergy can be sourced from forests, agricultural crops, various residue streams, and dedicated woody or herbaceous crops. Short rotation woody crops (SRWC), like willow and hybrid poplar, are perennial cropping systems that produce a number of environmental and economic development benefits in addition to being a renewable source of biomass that can be produced on marginal land. Both hybrid poplar and willow have several characteristics that make them an ideal feedstock for biofuels, bioproducts, and bioenergy; these include high yields that can be obtained in three to four years, ease of cultivar propagation from dormant cuttings, a broad underutilized genetic base, ease of breeding, ability to resprout after multiple harvests, and feedstock composition similar to other sources of woody biomass. Despite the range of benefits associated with SRWC systems, their deployment has been restricted by high costs, low market acceptance associated with inconsistent chip quality (see below for further explanation), and misperceptions about other feedstock characteristics (see below for further explanation). Harvesting of SRWC is the largest single cost factor (~1/3 of the final delivered cost) in the feedstock supply system. Harvesting is also the second largest input of primary fossil energy in the system after commercial N fertilizer, accounting for about one third of the input. Therefore, improving the efficiency of the harvesting system has the potential to reduce both cost and environmental impact. At the start of this project, we projected that improving the overall efficiency of the harvesting system by 25% would reduce the delivered cost of SRWC by approximately $0.50/MMBtu (or about $7.50/dry ton). This goal was exceeded over the duration of this project, as noted below.

Evaluation of the biological methane potential of various feedstock for the production of biogas to supply agricultural tractors

International Nuclear Information System (INIS)

Matuszewska, Anna; Owczuk, Marlena; Zamojska-Jaroszewicz, Anna; Jakubiak-Lasocka, Joanna; Lasocki, Jakub; Orliński, Piotr

2016-01-01

Highlights: • Biochemical methane potential for mixtures of whey, manures and silages was tested. • High impact of feedstock type on composition and yield of biogas was observed. • Simple mathematical model of methanogenic fermentation was proposed. • Exhaust emissions from dual fuel (biogas and diesel oil) engine were investigated. • Using biogas in engine reduces particulate matter and nitrogen oxides emissions. - Abstract: This work is divided into three parts. The first one presents results of biological methane potential of agriculture raw materials available in Poland. In the second part the simple mathematical model of methanogenic fermentation is proposed. The data for this model were obtained from experimental digestion process of chosen mixtures. Last part includes the results of research of exhaust emissions generated by dual dual-fuel engine of agricultural tractor powered by mixture of model biogas (60% and 70% of methane) and diesel oil. The obtained results revealed that there was a significant difference in chemical composition and yield of biogas between considered feedstock types. The highest biogas and methane production was obtained for mixtures in ratio of 6:4 for swine manure/maize silage and whey/grass silage. Due to agriculture conditions in Poland and obtain results, the maize silage and swine manure were chosen to development of mathematical model of fermentation process. It showed a satisfactory match to the experimental results. Results of emission tests on dual-fuel tractor engine supplied with biogas and diesel oil showed the higher concentrations of hydrocarbons and carbon oxide and lower concentrations of particulate matter in exhaust gases. Level of emission of particular components depends on the biogas composition.

Analytical evaluation of the protection offered by sealed tractor cabins during crop pulverization with fenitrothion.

Science.gov (United States)

Barcellos, Michelle; Faletti, Milena Michele; Madureira, Luiz Augusto Dos Santos; Bauer, Fernando Cesar

2016-12-01

The practice of large-scale agriculture requires the use of pesticides in order to maximize production. This activity has gained increasing attention in recent years, especially from rural workers, due to the risks associated with long-term exposure to pesticides. To minimize these risks, personal protection equipment (e.g., covers, gloves, and goggles) and collective protection equipment (e.g., agricultural tractors with sealed cabins) have been developed. In general, these approaches are intended to reduce the contact of farmers and agricultural machinery operators with the more toxic and stable compounds, an example of which is fenitrothion. In this study, fenitrothion was used as a marker to evaluate the protection afforded inside a sealed tractor cabin. To simulate the pesticide exposure, tests were performed using artificial cotton targets as passive adsorptive agents inside the cabin during the pesticide application. Samples were extracted according to the US Environmental Protection Agency (USEPA) procedure using ultrasonic extraction and as proposed by the Brazilian Standard for Solid Waste Classification (NBR 10004). The extracts were analyzed by high-performance liquid chromatography with diode array detection (HPLC-DAD). The chromatographic method was optimized using a factorial design. The combined results indicated that the best conditions were achieved using a mobile phase with a water/acetonitrile ratio of 35:65, a column temperature of 40 °C, and a flow rate of 1.0 mL/min, with a total analysis time of <10 min. The method was evaluated in the linear range of 0.50 to 2.01 mg/kg, with a determination coefficient of 0.9886. The precision was evaluated on different days and the relative standard deviations were between 0.17 and 3.41 %. In relation to the accuracy, recovery values of 95 to 104 % were obtained. The detection and quantification limits were 0.18 and 0.50 mg/kg, respectively. None of the target cottons showed concentrations of

Características ergonômicas dos tratores agrícolas utilizados na região central do Rio Grande do Sul Ergonomic characteristics of agricultural tractors used in central region of Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Henrique Debiasi

2004-12-01

Full Text Available A utilização de tratores agrícolas com boas condições ergonômicas reduz a probabilidade de ocorrência de acidentes e doenças ocupacionais, aumentando a eficiência dos trabalhadores. Neste trabalho, objetivou-se verificar a presença de itens relacionados à ergonomia de tratores agrícolas usados, bem como avaliar o comportamento destas características em função do tempo de uso das referidas máquinas. Foram analisados 175 tratores agrícolas pertencentes às microrregiões gaúchas de Santa Maria, Restinga Seca e Cachoeira do Sul, presentes em 114 propriedades aleatoriamente amostradas. Os resultados mostraram que apenas 3% dos espécimes avaliados eram equipados com cabina, sendo que a maior parte dos mesmos não apresentava isolamento do calor gerado pelo motor e transmissão. Com relação à ergonomia dos comandos, mais de 70% dos tratores tinham alavancas de câmbio centrais, enquanto que apenas 8% eram equipados com volante de direção regulável. Da mesma forma, mais de 20% dos exemplares amostrados possuíam bancos sem estofamento. Além disso, a presença dos itens avaliados foi menor para os tratores mais antigos.It is possible to reduce the probability of work accidents, diseases occurrence and increase the work efficiency using agricultural tractors with good ergonomic conditions. The objective of this research was to verify the presence of ergonomic items in used agricultural tractors and also to evaluate the influence of tractor age in these characteristics. 175 agricultural tractors belonging to 3 regions of Rio Grande do Sul State (Santa Maria, Restinga Seca and Cachoeira do Sul, Brazil, present in 114 farms randomly sampled, were evaluated. The results showed that only 3% of sampled specimens were equipped with a cab, and most part of the tractors did not have protection against the heat produced by tractor transmission and engine. With regard to ergonomics of commands, more than 70% of the tractors had gear levers

Evaluation of tractive performance of four agricultural tractors in laterally inclined terrain Avaliação do desempenho operacional de quatro tratores agrícolas em terreno inclinado lateralmente

Directory of Open Access Journals (Sweden)

Fabricio Leite

2011-10-01

Full Text Available The present work aimed to evaluate the tractive performance of four agricultural tractors with auxiliary front traction in function of six lateral inclinations in a lateral track of trials, which belongs to the Agronomic Sciences Faculty from the São Paulo State University, Campus of Botucatu. The lateral inclinations were 0; 5; 10; 15; 20 and 25 degrees. In all of these situations, the tractors operated with predetermined load of an imposed traction to the pulled tractor of 40 kN in the inclination of 0 degrees. Hence a delineation in random blocks was used, considering six inclinations and four tractors, and with three repetitions for each treatment. The analyzed variables were slippage, tractive force, hourly fuel consumption, and speed. It was concluded that the pneumatic tire configurations influenced in the tractive performance of the tractors, as they increased the lateral inclinations of the terrain.O presente trabalho teve como objetivo avaliar o desempenho operacional de quatro tratores agrícolas com tração dianteira auxiliar, em função de seis inclinações laterais, em uma pista lateral de ensaios, pertencente à Faculdade de Ciências Agronômicas da Universidade Estadual Paulista, Câmpus de Botucatu. As inclinações laterais foram 0; 5; 10; 15; 20 e 25 graus. Em todas estas situações, os tratores operaram com carga predeterminada de tração imposta ao trator tracionado de 40 kN na inclinação de 0 grau. Portanto, foi utilizado um delineamento em blocos casualizados (DBC, sendo seis inclinações e quatro tratores, e com três repetições para cada tratamento. As variáveis analisadas foram patinhagem, força de tração, consumo horário de combustível e velocidade de deslocamento. Concluiu-se que a configuração dos rodados pneumáticos influenciaram no desempenho operacional dos tratores, conforme aumentaram as inclinações laterais do terreno.

Physical and Mechanical Properties of Palm Oil Frond and Stem Bunch for Developing Pruner and Harvester Machinery Design

Directory of Open Access Journals (Sweden)

Yazid Ismi Intara

2013-06-01

Full Text Available A development of oil palm pruner and harvester machinery design implemented in the field still faces a problem due to the lack of effective and efficient design which is need to be solved. It was noted that in order to develop the design, an early data and information of physical and mechanical properties of palm oil frond and stem fruits is critically important. The objective of the research was to obtain the physical and mechanical properties of palm oil frond and stem in order to develop the design of pruner and harvester machinery. The result showed that tool machinery was been advantageous by the physical properties of the plant i.e. the total weight of frond and leaf which enable to support the cutting process. The average of total weight of frond and leaf was 16.8 kg. The diagonal cutting trajectory was been more advantageous because of total weight and frond shape toward to the different of the plant tissue area. The measurement result shows that cutting curve follows the time required for cutting. The comparison among cutting curve shows differences in cutting thickness or length. In this case, the thickness is linear with cutting time. Besides, those curves show differences at the height which determine the maximum value of tested material cutting resistance. Alternative solution for machinery development design is pruner-harvester for height plant below 6 m and among 6 to 12 m. For below 6 m, pruner-harvester was designed by incorporating motor as power source and cutter-disc as the knife cutter. That condition was relied on that estate which was maintenance intensively commonly used cutter-disc. Pruner-harvester above 6 m and up to 12 m was improved based on manual egrek-designed by adding fresh fruit bunch alley supply glide in order to keep the fruits still in intact form. The consideration was based on affectivity and efficiency. It also considers homogenous ecological of palm oil plant which should be maintained to reduce global

High-efficiency integrated piezoelectric energy harvesting systems

Science.gov (United States)

Hande, Abhiman; Shah, Pradeep

2010-04-01

This paper describes hierarchically architectured development of an energy harvesting (EH) system that consists of micro and/or macro-scale harvesters matched to multiple components of remote wireless sensor and communication nodes. The micro-scale harvesters consist of thin-film MEMS piezoelectric cantilever arrays and power generation modules in IC-like form to allow efficient EH from vibrations. The design uses new high conversion efficiency thin-film processes combined with novel cantilever structures tuned to multiple resonant frequencies as broadband arrays. The macro-scale harvesters are used to power the collector nodes that have higher power specifications. These bulk harvesters can be integrated with efficient adaptive power management circuits that match transducer impedance and maximize power harvested from multiple scavenging sources with very low intrinsic power consumption. Texas MicroPower, Inc. is developing process based on a composition that has the highest reported energy density as compared to other commercially available bulk PZT-based sensor/actuator ceramic materials and extending it to thin-film materials and miniature conversion transducer structures. The multiform factor harvesters can be deployed for several military and commercial applications such as underground unattended sensors, sensors in oil rigs, structural health monitoring, supply chain management, and battlefield applications such as sensors on soldier apparel, equipment, and wearable electronics.

Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network.

Science.gov (United States)

Lee, Dasheng

2008-12-02

In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV) measurement. The energy harvesting wireless sensor network (WSN) was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR) is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an energy efficient

Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

Science.gov (United States)

Lee, Dasheng

2008-01-01

In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV) measurement. The energy harvesting wireless sensor network (WSN) was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR) is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an energy efficient

Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

Directory of Open Access Journals (Sweden)

Dasheng Lee

2008-12-01

Full Text Available In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV measurement. The energy harvesting wireless sensor network (WSN was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an

Harvest Regulations and Implementation Uncertainty in Small Game Harvest Management

Directory of Open Access Journals (Sweden)

Pål F. Moa

2017-09-01

Full Text Available A main challenge in harvest management is to set policies that maximize the probability that management goals are met. While the management cycle includes multiple sources of uncertainty, only some of these has received considerable attention. Currently, there is a large gap in our knowledge about implemention of harvest regulations, and to which extent indirect control methods such as harvest regulations are actually able to regulate harvest in accordance with intended management objectives. In this perspective article, we first summarize and discuss hunting regulations currently used in management of grouse species (Tetraonidae in Europe and North America. Management models suggested for grouse are most often based on proportional harvest or threshold harvest principles. These models are all built on theoretical principles for sustainable harvesting, and provide in the end an estimate on a total allowable catch. However, implementation uncertainty is rarely examined in empirical or theoretical harvest studies, and few general findings have been reported. Nevertheless, circumstantial evidence suggest that many of the most popular regulations are acting depensatory so that harvest bag sizes is more limited in years (or areas where game density is high, contrary to general recommendations. A better understanding of the implementation uncertainty related to harvest regulations is crucial in order to establish sustainable management systems. We suggest that scenario tools like Management System Evaluation (MSE should be more frequently used to examine robustness of currently applied harvest regulations to such implementation uncertainty until more empirical evidence is available.

A Galloping Energy Harvester with Attached Flow

Science.gov (United States)

Denissenko, Petr; Khovanov, Igor; Tucker-Harvey, Sam

2017-11-01

Aeroelastic energy harvesters are a promising technology for the operation of wireless sensors and microelectromechanical systems, as well as providing the possibility of harvesting wind energy in applications were conventional wind turbines are ineffective, such as in highly turbulent flows, or unreliable, such as in harsh environmental conditions. The development of aeroelastic energy harvesters to date has focused on the flutter of airfoils, the galloping of prismatic structures, and the vortex induced vibrations. We present a novel type of galloping energy harvester with the flow becoming attached when the oscillation amplitude is high enough. With the flow attached, the harvester blade acts closer to an aerofoil than a bluff body, which results in a higher efficiency. The dynamics of a prototype device has been characterised experimentally with the use of a motion tracking system. The flow structure in the vicinity of the device has been studied using smoke visualisation and PIV measurements. A lumped parameter mathematical model has been developed and related to the experimental results.

Tropical forest harvesting and taxation: a dynamic model of harvesting behavior under selective extraction systems

Science.gov (United States)

Robert F. Conrad; Malcolm Gillis; D. Evan Mercer

2005-01-01

A dynamic model of selective harvesting in multi-species,multi-age tropical forests is developed. Forests are predicted to exhibit different optimal harvesting profiles depending on the nature of their joint cost functions and own or cross-species stock effects. The model is applied to the controversy about incentives produced by various taxes. The impacts of specific...

A nanoscale bio-inspired light-harvesting system developed from self-assembled alkyl-functionalized metallochlorin nano-aggregates

Science.gov (United States)

Ocakoglu, Kasim; Joya, Khurram S.; Harputlu, Ersan; Tarnowska, Anna; Gryko, Daniel T.

2014-07-01

Self-assembled supramolecular organization of nano-structured biomimetic light-harvesting modules inside solid-state nano-templates can be exploited to develop excellent light-harvesting materials for artificial photosynthetic devices. We present here a hybrid light-harvesting system mimicking the chlorosomal structures of the natural photosynthetic system using synthetic zinc chlorin units (ZnChl-C6, ZnChl-C12 and ZnChl-C18) that are self-aggregated inside the anodic aluminum oxide (AAO) nano-channel membranes. AAO nano-templates were modified with a TiO2 matrix and functionalized with long hydrophobic chains to facilitate the formation of supramolecular Zn-chlorin aggregates. The transparent Zn-chlorin nano-aggregates inside the alkyl-TiO2 modified AAO nano-channels have a diameter of ~120 nm in a 60 μm length channel. UV-Vis studies and fluorescence emission spectra further confirm the formation of the supramolecular ZnChl aggregates from monomer molecules inside the alkyl-functionalized nano-channels. Our results prove that the novel and unique method can be used to produce efficient and stable light-harvesting assemblies for effective solar energy capture through transparent and stable nano-channel ceramic materials modified with bio-mimetic molecular self-assembled nano-aggregates.Self-assembled supramolecular organization of nano-structured biomimetic light-harvesting modules inside solid-state nano-templates can be exploited to develop excellent light-harvesting materials for artificial photosynthetic devices. We present here a hybrid light-harvesting system mimicking the chlorosomal structures of the natural photosynthetic system using synthetic zinc chlorin units (ZnChl-C6, ZnChl-C12 and ZnChl-C18) that are self-aggregated inside the anodic aluminum oxide (AAO) nano-channel membranes. AAO nano-templates were modified with a TiO2 matrix and functionalized with long hydrophobic chains to facilitate the formation of supramolecular Zn-chlorin aggregates. The

Sustainability of Mangrove Harvesting: How do Harvesters' Perceptions Differ from Ecological Analysis?

Directory of Open Access Journals (Sweden)

Laura López-Hoffman

2006-12-01

Full Text Available To harvest biological resources sustainably, it is first necessary to understand what "sustainability" means in an ecological context, and what it means to the people who use the resources. As a case study, we examined the extractive logging of the mangrove Rhizophora mangle in the Río Limón area of Lake Maracaibo, in western Venezuela. The ecological definition of sustainable harvesting is harvesting that allows population numbers to be maintained or to increase over time. In interviews, the harvesters defined sustainable harvesting as levels permitting the maintenance of the mangrove population over two human generations, about 50 yr. In Río Limón, harvesters extract a combination of small adult and juvenile trees. Harvesting rates ranged from 7-35% of small adult trees. These harvesting levels would be sustainable according to the harvester's definition as long as juvenile harvesting was less than 40%. However, some harvesting levels that would be sustainable according to the harvesters were ecologically unsustainable, i.e., eventually causing declines in mangrove population numbers. It was also determined that the structure of mangrove forests was significantly affected by harvesting; even areas harvested at low, ecologically sustainable intensities had significantly fewer adult trees than undisturbed sites. Western Venezuela has no organized timber industry, so mangrove logs are used in many types of construction. A lagging economy and a lack of alternative construction materials make mangrove harvesting inevitable, and for local people, an economic necessity. This creates a trade-off between preserving the ecological characteristics of the mangrove population and responding to human needs. In order to resolve this situation, we recommended a limited and adaptive mangrove harvesting regime. We also suggest that harvesters could participate in community-based management programs as harvesting monitors.

POLISH FARM MACHINERY MARKET AFTER ACCESSION TO THE EUROPEAN UNION – PRODUCTION AND SUPPLY OF MEANS OF AGRICULTURAL MECHANIZATION

Directory of Open Access Journals (Sweden)

Jan Pawlak

2014-09-01

Full Text Available After accession to the EU in 2004 the demand for tractors and agricultural implements has grown, followed by increasing supply of them. In 2012, the supply of brand-new agricultural tractors was by 185.4% higher than in 2003. In 2012 the value of renovation index of tractor fleet in agriculture was by 149.3% higher than in 2003. In spite of significant increase of demand for tractors, their production in 2012 was by 39.2% lower than in 2003. The downfall in number of tractors produced in Poland caused that imported tractors achieved more and more important share in supplies on Polish market. In 2003 the share of imports amounted to 64.0% and in 2012 – 91.4%. Production of most other means of agricultural mechanization was in 2012 higher than in 2003. The increase in a case of manure spreaders amounted to 704.3%; self loading or unloading agricultural tractor trailers – 362.1%; fertilizer spreader – 335.2%; field sowing machines – 245.3%; pick-up balers – 222.1% and harvester threshers – 194.8. Decreases were noted in cases of steamers – by 73.3%; potato planters – by 49.7%; harrows other than disc ones – by 42.2%; potato diggers – by 31.2% and rototillers – by 22.8%.

Cost, energy use and GHG emissions for forest biomass harvesting operations

International Nuclear Information System (INIS)

Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

2016-01-01

For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

Post-harvest treatments in smooth-stalked meadow grass (Poa pratensis L.) - effect on carbohydrates and tiller development

DEFF Research Database (Denmark)

Boelt, Birte

2007-01-01

Temperate grass species require a period of short days/low temperature to respond to flower induction stimuli. The same environmental conditions stimulate the increase in carbohydrate concentration in aboveground biomass and the accumulation of reserve carbohydrates in the basal plant parts....... The present investigation was initiated to investigate the effect of post-harvest treatments on dry matter production in autumn, carbohydrate content, the number of reproductive tillers and seed yield in a turf-type cultivar ‘Conni' of smooth-stalked meadow grass. The results show that post-harvest treatments...... harvest and all residues removed. The results from plant samples in autumn indicate that decreasing aboveground biomass production leads to a higher carbohydrate concentration which may stimulate the reproductive development in smooth-stalked meadow grass....

Nyala and Bushbuck II: A Harvesting Model.

Science.gov (United States)

Fay, Temple H.; Greeff, Johanna C.

1999-01-01

Adds a cropping or harvesting term to the animal overpopulation model developed in Part I of this article. Investigates various harvesting strategies that might suggest a solution to the overpopulation problem without actually culling any animals. (ASK)

Development of a Compendium of Local, Wild-Harvested Species Used in the Informal Economy Trade, Cape Town, South Africa

Directory of Open Access Journals (Sweden)

L. M. Petersen

2012-06-01

Full Text Available Wild harvesting has taken place over millennia in Africa. However urbanization and cash economies have effectively altered harvesting from being cultural, traditional, and subsistence activities that are part of a rural norm, to being a subculture of commonly illicit activities located primarily within the urban, cash-based, informal economy. This paper focuses on Cape Town, South Africa where high levels of poverty and extensive population growth have led to a rapidly growing informal industry based on the cultural, subsistence, and entrepreneurial harvesting and consumption of products obtained from the local natural environment. Through a process of literature reviews, database analysis, and key informant interviews, a compendium of harvested species was developed, illustrating the breadth of illicit harvesting of products from nature reserves, public open space, and other commonage within the City. The compendium records 448 locally occurring species (198 animals and 250 plants that are extracted for medicinal, energy, ornamental, sustenance, nursery, and other uses. The sustainability of harvesting is questionable; nearly 70% of all harvested flora and 100% of all collected fauna are either killed or reproductively harmed through the harvesting processes. Furthermore, for the 183 indigenous flora species currently recorded on the International Union for Conservation of Nature (IUCN Red List, 28% (51 hold assessments ranging from Declining through to Critically Endangered. With respect to the more poorly assessed fauna (46 spp., approximately 24% (11 have Declining or Threatened status.

Terra Harvest software architecture

Science.gov (United States)

Humeniuk, Dave; Klawon, Kevin

2012-06-01

Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

Energy harvesting for microsystems

Energy Technology Data Exchange (ETDEWEB)

Ruichao Xu

2012-05-15

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 {mu}m silicon layer and 10-30 {mu}m screen printed PZT layer, anchored on a silicon frame at one end and attached to a silicon proof mass at the other. Electrodes will cover both side of the PZT layer, so the harvested energy can be collected electrically. The second archetype has a bimorph cantilever beam, which consists of two 15-35 {mu}m PZT layers, anchored on a silicon frame at the one end and attached to a silicon proof mass at the other. Electrodes are deposited below, between and above the two PZT layers. The root mean square (RMS) power output measured on this type of harvesters is as high as 37.1{mu}W at 1 g. The third archetype is similar to the first one, the screen printed PZT layer is replaced by a lead free piezoelectric material, (KxNa1-x)NbO3 (KNN). Some of the major challenges encountered during the development processes are bad adhesion, fragile structures and short circuiting through the PZT layer. All of which have being fully or partially solved in this project. The final energy harvesters are designed to be used in an energy harvester powered wireless sensing system. (Author)

MEMS-based thick film PZT vibrational energy harvester

DEFF Research Database (Denmark)

Lei, Anders; Xu, Ruichao; Thyssen, Anders

2011-01-01

We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using a mechan......We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using...... a mechanical front side protection of an SOI wafer with screen printed PZT thick film. The fabricated harvester device produces 14.0 μW with an optimal resistive load of 100 kΩ from 1g (g=9.81 m s-2) input acceleration at its resonant frequency of 235 Hz....

Palm biodiesel: performance of a agricultural tractor in function of differents storage periods; Biodiesel de dende: desempenho de trator agricola em funcao de diferentes periodos de armazenamento

Energy Technology Data Exchange (ETDEWEB)

Lopes, Afonso; Oliveira, Melina C.J. [Universidade Estadual Paulista Julio de Mesquita Filho (FCAV/UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural], email: fonso@fcav.unesp.br; Lima, Leomar P. [Instituto Federal do Triangulo Mineiro (IFTM), Uberlandia, MG (Brazil); Camara, Felipe P. [Universidade Federal do Ceara (UFC), Cariri, CE (Brazil)

2011-07-01

The use of biofuel for replacement of oil in internal combustion engines is an alternative to seek the reduction of harmful effects that the use of these fuels question to the environment. The objective of this work was to evaluate the performance of a tractor in the light of storage time of the biodiesel of palm oil. The experiment was conducted in the Laboratory of machinery and agricultural mechanization of Rural Engineering Department of UNESP, Jaboticabal, SP. In this study, -if a tractor Valtra BM 110 4x2 TDA 74 kW (100 cv) in engine 2.350 rpm. The experimental design was completely randomized, in factorial scheme 5x3, with 3 repetitions. The first factor represents 5 proportions of mixing biodiesel for diesel (B0, B5, B25, B 50 and B100, that the number indicates the percentage of biodiesel for diesel) and three storage times in condition storage environment in a rural property (0, 3 and 6 months). The mixtures were prepared hours before the test. The results showed that the storage time did not influence the performance of the tractor, occurring biodiesel specific increase in consumption from the proportion of 25% (B25) mixture of biodiesel for diesel. (author)

Applying New Technologies to Transform Blueberry Harvesting

Directory of Open Access Journals (Sweden)

Fumiomi Takeda

2017-05-01

Full Text Available The growth of the blueberry industry in the past three decades has been remarkably robust. However, a labor shortage for hand harvesting, increasingly higher labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study, we evaluated semi-mechanical harvesting systems consisting of a harvest-aid platform with soft fruit catching surfaces that collected the fruit detached by portable, hand-held, pneumatic shakers. The softer fruit catching surfaces were not glued to the hard sub-surfaces of the harvest-aid platform, but suspended over them. Also, the ergonomic aspect of operating powered harvesting equipment was determined. The pneumatic shakers removed 3.5 to 15 times more fruit (g/min than by hand. Soft fruit catching surfaces reduced impact force and bruise damage. Fruit firmness was higher in fruit harvested by hand compared to that by pneumatic shakers in some cultivars. The bruise area was less than 8% in fruit harvested by hand and with semi-mechanical harvesting system. The percentage of blue, packable fruit harvested by pneumatic shakers comprised as much as 90% of the total, but less than that of hand-harvested fruit. The ergonomic analysis by electromyography showed that muscle strain in the back, shoulders, and forearms was low in workers operating the light-weight, pneumatic shakers that were tethered to the platform with a tool balancer. The new harvesting method can reduce the labor requirement to about 100 hour/hectare/year and help to mitigate the rising labor cost and shortage of workers for harvesting fresh-market quality blueberries.

Ultrasound acoustic wave energy transfer and harvesting

Science.gov (United States)

Shahab, Shima; Leadenham, Stephen; Guillot, François; Sabra, Karim; Erturk, Alper

2014-04-01

This paper investigates low-power electricity generation from ultrasound acoustic wave energy transfer combined with piezoelectric energy harvesting for wireless applications ranging from medical implants to naval sensor systems. The focus is placed on an underwater system that consists of a pulsating source for spherical wave generation and a harvester connected to an external resistive load for quantifying the electrical power output. An analytical electro-acoustic model is developed to relate the source strength to the electrical power output of the harvester located at a specific distance from the source. The model couples the energy harvester dynamics (piezoelectric device and electrical load) with the source strength through the acoustic-structure interaction at the harvester-fluid interface. Case studies are given for a detailed understanding of the coupled system dynamics under various conditions. Specifically the relationship between the electrical power output and system parameters, such as the distance of the harvester from the source, dimensions of the harvester, level of source strength, and electrical load resistance are explored. Sensitivity of the electrical power output to the excitation frequency in the neighborhood of the harvester's underwater resonance frequency is also reported.

Applying new technologies to transform blueberry harvesting

Science.gov (United States)

The growth of the blueberry industry in the past three decades has been remarkable. However, labor shortage for hand harvesting, increasingly high labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study ...

IMPROVEMENT OF WEAR-RESISTANCE AND SERVICE LIFE OF MULTI-DISK BRAKE MECHANISMS OF «BELARUS» TRACTOR BY LASER THERMAL HARDENING OF FAST WEARING PARTS

Directory of Open Access Journals (Sweden)

O. S. Kobjakov

2008-01-01

Full Text Available Problems concerning wear resistance improvement of «Belarus» tractor brake mechanism parts are considered in the paper. Properties of ВЧ-50-pig iron are investigated as a result of laser thermal hardening by various technological methods.

Triboelectric effect in energy harvesting

Science.gov (United States)

Logothetis, I.; Vassiliadis, S.; Siores, E.

2017-10-01

With the development of wearable technology, much research has been undertaken in the field of flexible and stretchable electronics for use in interactive attire. The challenging problem wearable technology faces is the ability to provide energy whilst keeping the endproduct comfortable, light, ergonomic and nonintrusive. Energy harvesting, or energy scavenging as it is also known, is the process by which ambient energy is captured and converted into electric energy. The triboelectric effect converts mechanical energy into electrical energy based on the coupling effect of triboelectrification and electrostatic induction and is utilized as the basis for triboelectric generators (TEG). TEG’s are promising for energy harvesting due their high output power and efficiency in conjunction with simple and economical production. Due to the wide availability of materials and ease of integration, in order to produce the triboelectric effect such functional materials are effective for wearable energy harvesting systems. Flexible TEG’s can be built and embedded into attire, although a thorough understanding of the underlying principle of how TEG’s operate needs to be comprehended for the development and in incorporation in smart technical textiles. This paper presents results associated with TEG’S and discusses their suitability for energy harvesting in textiles structures.

Microelectronic circuit design for energy harvesting systems

CERN Document Server

Di Paolo Emilio, Maurizio

2017-01-01

This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design. Provides a single-source reference to energy harvesting and its applications; Serves as a practical guide to microelectronics design for energy harvesting, with application to mobile power supplies; Enables readers to develop energy harvesting systems for wearable/mobile electronics.

The Effect of Plant Cultivar, Growth Media, Harvest Method and Post Harvest Treatment on the Microbiology of Edible Crops

Science.gov (United States)

Hummerick, Mary P.; Gates, Justin R.; Nguyen, Bao-Thang; Massa, Gioia D.; Wheeler, Raymond M.

2011-01-01

Systems for the growth of crops in closed environments are being developed and tested for potential use in space applications to provide a source of fresh food. Plant growth conditions, growth media composition and harvest methods can have an effect on the microbial population of the plant, and therefore should be considered along with the optimization of plant growth and harvest yields to ensure a safe and palatable food crop. This work examines the effect of plant cultivar, growth media, and harvest method on plant microbial populations. Twelve varieties of leafy greens and herbs were grown on a mixture of Fafard #2 and Arcillite in the pillow root containment system currently being considered for the VEGGIE plant growth unit developed by Orbitec. In addition, ,Sierra and Outredgeous lettuce varieties were grown in three different mixtures (Fafard #2, Ardllite, and Perlite/Vermiculite). The plants were analyzed for microbial density. Two harvest methods, "cut and come again" (CACA) and terminal harvest were also compared. In one set ofexpe'riments red leaf lettuce and mizuna were grown in pots in a Biomass Production System for education. Plants were harvested every two weeks by either method. Another set of experiments was performed using the rooting pillows to grow 5 varieties of leafy greens and cut harvesting at different intervals. Radishes were harvested and replanted at two-week intervals. Results indicate up to a 3 IOglO difference in microbial counts between some varieties of plants. Rooting medium resulted in an approximately 2 IOglO lower count in the lettuce grown in arscillite then those grown in the other mixtures. Harvest method and frequency had less impact on microbial counts only showing a significant increase in one variety of plant. Post harvest methods to decrease the bacterial counts on edible crops were investigated in these and other experiments. The effectiveness of PRO-SAN and UV-C radiation is compared.

Analisis dan Perancangan Aplikasi Pendukung Erp Sap R/3 Modul Sales And Distribution PT. United Tractors, Tbk

OpenAIRE

Johan, Johan; Susanto, Yokie; Joe, Yusmin; Robby, Robby

2010-01-01

The purpose of this research is to analyse sales process having been implementing Sales and Distribution module of ERP SAP R/3 and also to design a supporting application for sales process at PT United Tractor, Tbk. The benefit of this application is to help sales person and customer in doing inquiries, quotation and sales order also material information through short message. The method of this research is data capturing, literature review, object oriented analysis and design and Rational Un...

Anderson introduces a new biomass baler

Energy Technology Data Exchange (ETDEWEB)

D' amour, L.; Lavoie, F. [Anderson Group Co., Chesterville, PQ (Canada)

2010-07-01

Canadian-based Anderson Group Company has developed an innovative round baler for harvesting a large variety of woody biomass. The baler was initially developed in 2005 in collaboration with the University Laval and Agriculture and Agri-Food Canada. The third generation BIOBALER{sup TM} is currently built, engineered and commercialized by Anderson. It can produce up to 40 bales/hr in short rotations woody crops such as willow and hybrid poplar. The unit can harvest brushes up to 125 mm in diameter. A standard tractor can pull the BIOBALER in fallow or abandoned land, under power transmission lines, and between planted trees. The patented BIOBALER includes a mulcher head attachment, a choice of long or short swivel tongue, a fixed chamber and an undercarriage frame.

A nanoscale bio-inspired light-harvesting system developed from self-assembled alkyl-functionalized metallochlorin nano-aggregates

KAUST Repository

Ocakoǧlu, Kasim; Joya, Khurram Saleem; Harputlu, Ersan; Tarnowska, Anna; Gryko, Daniel T.

2014-01-01

Self-assembled supramolecular organization of nano-structured biomimetic light-harvesting modules inside solid-state nano-templates can be exploited to develop excellent light-harvesting materials for artificial photosynthetic devices. We present here a hybrid light-harvesting system mimicking the chlorosomal structures of the natural photosynthetic system using synthetic zinc chlorin units (ZnChl-C6, ZnChl-C12 and ZnChl-C 18) that are self-aggregated inside the anodic aluminum oxide (AAO) nano-channel membranes. AAO nano-templates were modified with a TiO2 matrix and functionalized with long hydrophobic chains to facilitate the formation of supramolecular Zn-chlorin aggregates. The transparent Zn-chlorin nano-aggregates inside the alkyl-TiO2 modified AAO nano-channels have a diameter of ∼120 nm in a 60 μm length channel. UV-Vis studies and fluorescence emission spectra further confirm the formation of the supramolecular ZnChl aggregates from monomer molecules inside the alkyl-functionalized nano-channels. Our results prove that the novel and unique method can be used to produce efficient and stable light-harvesting assemblies for effective solar energy capture through transparent and stable nano-channel ceramic materials modified with bio-mimetic molecular self-assembled nano-aggregates. © 2014 the Partner Organisations.

Risk factors of musculoskeletal disorders among oil palm fruit harvesters during early harvesting stage

Directory of Open Access Journals (Sweden)

Yee Guan Ng

2015-05-01

Full Text Available This cross-sectional study intends to investigate the associations of musculoskeletal disorders (MSDs among foreign labourers on a socio-economic background, occupational exposure, social lifestyle, and postures adopted during harvesting tasks. A total of 446 male respondents (263 FFB cutters; 183 FFB collectors were studied using an interview-assisted questionnaire. OWAS was used to determine the severity of awkward posture based on videos of harvesting tasks recorded for each respondent. Analysis found that increasingly educated respondents had higher risk of developing MSDs. Shorter daily work duration and longer resting duration appear to increase the risk of neck and shoulder disorders among harvesters, which may be attributable to organizational work design. Awkward posture was a particularly significant risk factor of MSDs among FFB collectors. Among the results of the study, occupational exposure, postures and certain socio-demographic backgrounds explained some, but not all, the risk factor of MSDs among harvesters. An in-depth investigation, preferably a longitudinal study investigating the dynamic of work activities and other risk factors, such as psychosocial risk factors, are recommended.

Piezoelectric energy harvesting from flow-induced vibration

International Nuclear Information System (INIS)

Wang, D-A; Ko, H-H

2010-01-01

A new piezoelectric energy harvester for harnessing energy from flow-induced vibration is developed. It converts flow energy into electrical energy by piezoelectric conversion with oscillation of a piezoelectric film. A finite element model is developed in order to estimate the generated voltage of the piezoelectric laminate subjected to a distributed load. Prototypes of the energy harvester are fabricated and tested. Experimental results show that an open circuit output voltage of 2.2 V pp and an instantaneous output power of 0.2 µW are generated when the excitation pressure oscillates with an amplitude of 1.196 kPa and a frequency of about 26 Hz. The solution of the generated voltage based on the finite element model agrees well with the experiments. Based on the finite element model, the effects of the piezoelectric film dimensions, the fluid pressure applied to the harvester and types of piezoelectric layer on the output voltage of the harvester can be investigated.

Effect of the load of drive axles and high of the curtain on stress-strain properties of the tractor

Directory of Open Access Journals (Sweden)

Tomáš Šmerda

2007-01-01

Full Text Available The goal of the experimental measurement was determination of relation among weight load of the tractor together, hitch height changes and drawbar characteristic. The measurement was realized on chassis dynamometer at MUAF in Brno. The first step consisted of rated speed characteristics measurement in conformity with OECD demands. The drawbar characteristic was measured under two selected gears. Adding 980 kg to the nominal wight of the tractor brought increasing maximal drawbar power and drawbar force together with decreasing of slip. The highest differences were observed during the mesurement of fifth gear shifted. The drawbar force grew up to 18.9% as well as the maximal drawbar power (15.2%. The maximal drawbar power at ninth gear gave 62.8 kW. The hitch height was setting to 0.54 m; 0.64 m and 0.74 m. When the hitch height was set from 0.54 m to 0.74 m the drawbar force an power on front axle was lower by reason of load reduction. As can be noticed from the final drawbar characteristics, both curves are identical up to border of maximal drawbar power. Small differences in the area of the highest slips can be ascribed to the rolling resistance.

Truck Rollover Characterization for Class-8 Tractor-Trailers Utilizing Standard Dual Tires and New-Generation Single Tires

Energy Technology Data Exchange (ETDEWEB)

Capps, Gary [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Knee, Bill [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Franzese, Oscar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Pollock, Paul [Dana Corporation, Kalamazoo, MI (United States). Commercial Vehicle Systems Division; Coleman, Daniel [Dana Corporation, Kalamazoo, MI (United States). Commercial Vehicle Systems Division; Janajreh, Ibrahim [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Haas, Steven [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Frey, Norm [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Law, Harry [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Johnson, Eric [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Lawson, Robert [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Petrolino, Joe [National Transportation Research Center, Inc., Knoxville, TN (United States); Rice, Dave [National Transportation Research Center, Inc., Knoxville, TN (United States)

2005-07-30

The Heavy Truck Rollover Characterization Project is a major research effort conducted by the National Transportation Research Center, Inc. (NTRCI) in partnership with Oak Ridge National Laboratory (ORNL), Dana Corporation (Dana), Michelin Americas Research and Development Corporation (Michelin) and Clemson University (Clemson), under the NTRCIs Heavy Vehicle Safety Research Center (HVSRC) for the Federal Highway Administration (FHWA). ORNL provided the day-to-day management of the project. The expertise mix of this team coupled with complementary research needs and interests, and a positive can-do attitude provided an extremely positive experimental research opportunity for all involved. Furthermore, this team supplied significant and valuable resources that provided a strong positive benchmark regarding the ability to conduct research within a public-private partnership. The work conducted by this team focused on initial efforts to generate data and information on heavy truck rollover not currently available in the industry. It reflects efforts within Phases 1 and 2 of a longer-term four-phase research program. A 1999 Peterbilt 379 class-8 tractor and 2004 Wabash dry freight van trailer were the test vehicles utilized in this effort. Both were instrumented with a number of sensors to capture the dynamics of the tractor and trailer as it engaged in various testing maneuvers that included: an evasive maneuver, swept sine, constant radius, and a run-off-the-road maneuver. The run-off-the-road maneuver was discontinued because the test track could not safety accommodate such a maneuver. These maneuvers were carried out utilizing both standard dual tires and new-generation dual tires in six test series. Two test series also included the use of a wider-slider suspension. Outriggers were placed on the test vehicle to assure that an actual rollover would not occur, however, the tests were designed to generate lift-off of tires during the tests. One of the main objectives

Combine Harvester Simulator

DEFF Research Database (Denmark)

Vilmann, Ole; Sørlie, James Arnold

1999-01-01

A simulator for training pilots in the operation of a modern high-tech combine harvester is presented. The new simulator application is based on DMI´s well-known DMS maritime simulator architecture. Two major challenges have been encountered in the development of the simulator: 1) interfacing the...

Smoke opacity of agricultural tractor using biodiesel in function of weather conditions in the time of testing; Opacidade da fumaca de trator agricola utilizando biodiesel em funcao das condicoes climaticas no horario de execucao do ensaio

Energy Technology Data Exchange (ETDEWEB)

Lopes, Afonso; Camara, Felipe T. da; Oliveira, Melina Cais Jejcic de; Furlani, Carlos E.A.; Silva, Rouverson Pereira da; Mello Junior, Jose G.S. [Universidade Estadual Paulista (FCAV/UNESP), SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural], E-mail: afonso@fcav.unesp.br

2009-07-01

The biodiesel highlights as an alternative fuel to petroleum diesel, due its similar diesel properties, allowing the biodiesel replace the diesel without engine's alterations. The present work aimed measure the tractor's smoke opacity running with biodiesel in three proportions (B0, B50, and B100), in function of environment temperature and moisture in eight times (1h, 4h, 7h, 10h, 13h, 16h, 19h, and 22h). The experiment was conducted in the Rural Engineering Department of UNESP, Jaboticabal, Brazil, it was used a Valtra BM100 4x2 TDA (74kW - 100 cv) tractor, in the engine at 2350 rpm, and a soybean's distillated ethylic Biodiesel produced by USP - Laboratory of Development of Clean Technologies, in Ribeirao Preto, Brazil. The results evidence smoke opacity reduction in order to environment temperature reduction and when increased the moisture. (author)

An upper limb mathematical model of an oil palm harvester

Science.gov (United States)

Tumit, N. P.; Rambely, A. S.; BMT, Shamsul; Shahriman A., B.; Ng Y., G.; Deros, B. M.; Zailina, H.; Goh, Y. M.; Arumugam, Manohar; Ismail, I. A.; Abdul Hafiz A., R.

2014-09-01

The main purpose of this article is to develop a mathematical model of human body during harvesting via Kane's method. In this paper, a 2-D closed-kinematic biomechanical model that represents a harvesting movement is developed. The model of six segments consisted of upper right arm, right forearm, harvesting equipment, left forearm, upper left arm, and upper part of trunk. Finally, the inverse dynamic equations are represented in matrix form.

Post-harvest physiology

Science.gov (United States)

Weather and management constraints, as well as the intended use of the harvested forage, all influence the forage harvest system selected by the producer. Generally, maximum retention of dry matter from harvested forage crops is achieved at moistures intermediate between the standing fresh crop and ...

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

International Nuclear Information System (INIS)

Matova, S P; Elfrink, R; Vullers, R J M; Van Schaijk, R

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with adjustable resonance frequencies have been designed—one with a solid bottom and one with membrane on the bottom. The resonance frequencies of the resonators were matched to the complementing piezoelectric harvesters during harvesting. The aim of the presented work is a feasibility study on using packaged piezoelectric energy harvesters with Helmholtz resonators for airflow energy harvesting. The maximum energy we were able to obtain was 42.2 µW at 20 m s −1

Nanoscale piezoelectric vibration energy harvester design

Science.gov (United States)

Foruzande, Hamid Reza; Hajnayeb, Ali; Yaghootian, Amin

2017-09-01

Development of new nanoscale devices has increased the demand for new types of small-scale energy resources such as ambient vibrations energy harvesters. Among the vibration energy harvesters, piezoelectric energy harvesters (PEHs) can be easily miniaturized and fabricated in micro and nano scales. This change in the dimensions of a PEH leads to a change in its governing equations of motion, and consequently, the predicted harvested energy comparing to a macroscale PEH. In this research, effects of small scale dimensions on the nonlinear vibration and harvested voltage of a nanoscale PEH is studied. The PEH is modeled as a cantilever piezoelectric bimorph nanobeam with a tip mass, using the Euler-Bernoulli beam theory in conjunction with Hamilton's principle. A harmonic base excitation is applied as a model of the ambient vibrations. The nonlocal elasticity theory is used to consider the size effects in the developed model. The derived equations of motion are discretized using the assumed-modes method and solved using the method of multiple scales. Sensitivity analysis for the effect of different parameters of the system in addition to size effects is conducted. The results show the significance of nonlocal elasticity theory in the prediction of system dynamic nonlinear behavior. It is also observed that neglecting the size effects results in lower estimates of the PEH vibration amplitudes. The results pave the way for designing new nanoscale sensors in addition to PEHs.

Professional risk of developing diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production

Directory of Open Access Journals (Sweden)

G.A. Bezrukova

2015-09-01

Full Text Available Based on the results of the hygienic assessment of working conditions in the domestic agricultural machinery of old and new models when performing the main types of seasonal agricultural work during the annual production cycle and analysis of accumulated occupational diseases’ nosology structure in agricultural workers of the Saratov region over the period from 2004 to 2014, the estimation of professional risk diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production is given. Professional risk assessment carried out under the procedure set forth in P2.2.1766-03 has shown that the category of a priori risk to their health during an annual production cycle ranged from high to very high (unbearable. It was revealed that the most important factors shaping the harmful working conditions when working on agricultural machinery that can act as a trigger in the formation of vertebral diseases of the peripheral nervous system, are general and local vibration, adverse micro-climatic conditions, long uncomfortable static working posture and physical stress. The risk of diseases in the peripheral uneven system in machine operators of agriculture was attributed to the high risk category with an index of professional diseases (IPD equal to 0,5 %.

Conformidade de acessos e de saídas de postos de operação em tratores agrícolas segundo norma NBR/ISO 4252 Conformity of the accesses and exits of agricultural tractors workplaces according to NBR/ISO 4252 STANDARD

Directory of Open Access Journals (Sweden)

Danielle M. P. Mattar

2010-02-01

Full Text Available Este trabalho teve como objetivo avaliar a conformidade dos acessos e de saídas dos postos de operação em tratores agrícolas, por meio de população amostral dos tratores fabricados no Brasil. Para a avaliação, diversos itens referentes aos acessos e às saídas dos postos de operação foram analisados qualitativa e quantitativamente com base nos padrões da Norma NBR/ISO 4252. Ao final do trabalho, foi observado que os tratores classificados na Classe III, quanto à potência nominal do motor, atendem ao maior número de requisitos da Norma em comparação a tratores da Classe II. Dentre os itens avaliados, a altura da plataforma até o teto dos postos de operação foi atendida por todos os modelos. As presenças de batentes de proteção sobre os degraus e de corrimão para o operador foram os itens em maior desconformidade sobre os tratores. Como resultado médio, a população amostral foi conforme em 66% dos itens analisados. Os tratores dotados de motores de maior potência apresentaram, em geral, acessos e saídas dos postos de operação mais ergonômicos e seguros. De maneira geral, conclui-se pela baixa conformidade dos itens de ergonomia e de segurança dispostos ao operador sobre os postos de operação em tratores agrícolas nacionais.This work had as objective to evaluate the conformity of agricultural tractors workplaces accesses and exits made in Brazil. For this evaluation, the workplaces were analyzed according to NBR/ISO 4252 Standard. It was observed that the tractors classified in Class III, in relation to power engine, was better then tractors in Class II. Among the parameters evaluated, the platform weight of operator workplace was attended by all the tractors. The items in less conformoty in agricultural tractors are the doorpost of protection on the steps and the handrail to the operator. As results, the sampling population was conformed in 66% of the analyzed items. The tractors with more powerful engines

Tests of Nacelle-Propeller Combinations in Various Positions with Reference to Wings V : Clark Y Biplane Cellule - NACA Cowled Nacelle - Tractor Propeller

Science.gov (United States)

Valentine, E Floyd

1935-01-01

This report is the fifth of a series giving the results obtained from wind tunnel tests on the interference drag and propulsive efficiency of nacelle-propeller-wing combinations. This report gives results of tests of an NACA cowled air-cooled engine nacelle with tractor propeller located in 12 positions with reference to a Clark Y biplane cellule.

Helical Piezoelectric Energy Harvester and Its Application to Energy Harvesting Garments

Directory of Open Access Journals (Sweden)

Minsung Kim

2017-04-01

Full Text Available In this paper, we propose a helical piezoelectric energy harvester, examine its application to clothes in the form of an energy harvesting garment, and analyze its design and characteristics. The helical harvester is composed of an elastic core and a polymer piezoelectric strap twining the core. The fabricated harvester is highly elastic and can be stretched up to 158% of its initial length. Following the experiments using three different designs, the maximum output power is measured as 1.42 mW at a 3 MΩ load resistance and 1 Hz motional frequency. The proposed helical harvesters are applied at four positions of stretchable tight-fitting sportswear, namely shoulder, arm joint, knee, and hip. The maximum output voltage is measured as more than 20 V from the harvester at the knee position during intended body motions. In addition, electric power is also generated from this energy harvesting garment during daily human motions, which is about 3.9 V at the elbow, 3.1 V at the knee, and 4.4 V at the knee during push-up, walking, and squatting motions, respectively.

Determination of the curves, torque harnesses of performance of an agricultural tractor Massey Ferguson MF 275

Energy Technology Data Exchange (ETDEWEB)

Paula, Vanderson Rabelo de [Universidade de Sao Paulo (ESALQ/USP), Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz; Silva, Breno Alves; Santos, Thiago Castro Vidal dos; Porto, Rodrigo Padovani; Volpato, Carlos Eduardo Silva; Barbosa, Jackson Antonio [Universidade Federal de Lavras (UFLA), MG (Brazil)

2008-07-01

The globalization of the economy has approached the markets and one of the consequences of this approach is the entrance of new equipment and highly competitive machines in cost terms. This is the same reality of the Brazilian agricultural sector that today counts on new options of machines and very interesting implements of the point of view of the acquisition cost. In this context, this work aimed at the dynamometric assay of an agricultural tractor for attainment of its curves of torque, power using the B100 soybean fuels, B100 olive, B100 diesel. (author)

Overview of approaches to sustain forest productivity during forest road development and timber harvesting activities

Science.gov (United States)

Charles R. Blinn; Rick Dahlamn; James A. Mattson; Michael A. Thompson

1999-01-01

Various approaches are available to minimize impacts on forest productivity during forest road building and timber harvesting activities. These approaches include a variety of practices and technologies. They include practices such as reducing road and trail development, using designated trails, and leaving slash at the stump on nutrient deficient sites. Technology...

Fuel efficiency of conventional design tractors diesel engines in relation to new design

Directory of Open Access Journals (Sweden)

Jevtić Jeremija

2006-01-01

Full Text Available Total consumption of all types of energies is rather high nowadays with constant tendency of increasing. Transport section is one of the highest consumers of energy obtained from fossil fuels. It is absolutely clear that the reduction of energy consumption and the protection of environment - exhaust emission reduction, i. e. cleaner air, will be one of the main tasks of automotive industry in the first decades of the 21st century. In spite of its superiority over the petrol engine in respect of the fuel consumption, a diesel engine "suffers" from the increased exhaust emission, particles and NOx first of all and also from the noise and vibrations. The paper gives a review of fuel efficiency of conventional design tractors diesel engines in relation to new design. .

Compactação causada pelo tráfego de trator em diferentes manejos de solo = Soil compaction induced by tractor traffic in different soil managements

Directory of Open Access Journals (Sweden)

João Paulo Arantes Rodrigues da Cunha

2009-07-01

Full Text Available O objetivo deste trabalho foi avaliar a compactação do solo causada pelo tráfego de trator, em um Latossolo Vermelho distroférrico submetido a diferentes tipos de preparo. O delineamento experimental utilizado foi o de blocos casualizados, com arranjo de parcelassubdivididas, considerando os tipos de preparo de solo como tratamentos principais e o número de passadas do trator como tratamentos secundários. Como tratamentos de preparo de solo, além de uma testemunha sem movimentação, foram avaliados: aração com 18 cmde profundidade, aração com 18 cm de profundidade, seguida de gradagem a 10 cm e subsolagem a 40 cm de profundidade. Após o preparo, foi avaliada a resistência do solo à penetração, por meio de um penetrômetro eletrônico, antes da passagem do trator e apósuma, três, cinco e sete vezes a passagem do trator na mesma linha de tráfego. Também se realizou a avaliação de densidade do solo. Concluiu-se que quanto maior a pulverização do solo, maior foi o potencial de compactação. Solos recentemente arados e gradeados forammais susceptíveis à compactação do que solos somente arados ou subsolados. O efeito do tráfego do trator concentrou-se principalmente na camada superficial, e a primeira passada foi a que mais provocou compactação do solo.The objective of this work was to evaluate soil compaction induced bytractor traffic in a Red Latosol (Typic Acrustox, submitted to different soil managements. The experiment was arranged in a subdivided parcel scheme, with types of soil tillage as theprimary soil treatments and the number of tractor passes as secondary treatments. In addition to a control treatment without soil tillage, the treatments were: tilling to a depth of 18 cm, a tilling to a depth of 18 cm followed by harrow use at a depth of 10 cm, and a 40-cm deep subsoil tilling. After preparing the parcels, soil penetration resistance was measured with an electronic penetrometer, before tractor passes and

Energy harvesting autonomous sensor systems design, analysis, and practical implementation

CERN Document Server

Tan, Yen Kheng

2013-01-01

This book is the considered the first to describe sensor-oriented energy harvesting issues. Its content is derived from the author's research on the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). This network harvests energy from a variety of ambient energy sources and converts it into electrical energy to power batteries. The book discusses various types of energy harvesting (EH) systems and their respective main components.

The case for energy harvesting on wildlife in flight

International Nuclear Information System (INIS)

Shafer, Michael W; MacCurdy, Robert; Garcia, Ephrahim; Shipley, J Ryan; Winkler, David; Guglielmo, Christopher G

2015-01-01

The confluence of advancements in microelectronic components and vibrational energy harvesting has opened the possibility of remote sensor units powered solely from the motion of their hosts. There are numerous applications of such systems, including the development of modern wildlife tracking/data-logging devices. These ‘bio-logging’ devices are typically mass-constrained because they must be carried by an animal. Thus, they have historically traded scientific capability for operational longevity due to restrictions on battery size. Recently, the precipitous decrease in the power requirements of microelectronics has been accompanied by advancements in the area of piezoelectric vibrational energy harvesting. These energy harvesting devices are now capable of powering the type of microelectronic circuits used in bio-logging devices. In this paper we consider the feasibility of employing these vibrational energy harvesters on flying vertebrates for the purpose of powering a bio-logging device. We show that the excess energy available from birds and bats could be harvested without adversely affecting their overall energy budget. We then present acceleration measurements taken on flying birds in a flight tunnel to understand modulation of flapping frequency during steady flight. Finally, we use a recently developed method of estimating the maximum power output from a piezoelectric energy harvester to determine the amount of power that could be practically harvested from a flying bird. The results of this analysis show that the average power output of a piezoelectric energy harvester mounted to a bird or bat could produce more than enough power to run a bio-logging device. We compare the power harvesting capabilities to the energy requirements of an example system and conclude that vibrational energy harvesting on flying birds and bats is viable and warrants further study, including testing. (paper)

The role of the Business Environment in Harvesting Strategies

Directory of Open Access Journals (Sweden)

Deidré van Rooyen

2010-12-01

Full Text Available Harvesting is made up of many different strategies that can be used by entrepreneurs to exit their business. This is a long-term ambition to create real value to the business. In Beaufort West, a uranium mining development is going to take place and thus create opportunities for existing and new businesses. This study investigates how the changing business environment will influence this harvesting choice made by the entrepreneur. Recommendations indicate that entrepreneurs need more information and training regarding the specific harvesting concept and strategies that are available, because no specific harvesting strategy was noted as important by the entrepreneurial respondents. Keywords and phrases: business environment; harvesting; exit; business; entrepreneur; uranium

Survival models for harvest management of mourning dove populations

Science.gov (United States)

Otis, D.L.

2002-01-01

Quantitative models of the relationship between annual survival and harvest rate of migratory game-bird populations are essential to science-based harvest management strategies. I used the best available band-recovery and harvest data for mourning doves (Zenaida macroura) to build a set of models based on different assumptions about compensatory harvest mortality. Although these models suffer from lack of contemporary data, they can be used in development of an initial set of population models that synthesize existing demographic data on a management-unit scale, and serve as a tool for prioritization of population demographic information needs. Credible harvest management plans for mourning dove populations will require a long-term commitment to population monitoring and iterative population analysis.

The effects of harvest on waterfowl populations

Science.gov (United States)

Cooch, Evan G.; Guillemain, Matthieu; Boomer, G Scott; Lebreton, Jean-Dominique; Nichols, James D.

2014-01-01

Change in the size of populations over space and time is, arguably, the motivation for much of pure and applied ecological research. The fundamental model for the dynamics of any population is straightforward: the net change in the abundance is the simple difference between the number of individuals entering the population and the number leaving the population, either or both of which may change in response to factors intrinsic and extrinsic to the population. While harvest of individuals from a population constitutes a clear extrinsic source of removal of individuals, the response of populations to harvest is frequently complex, reflecting an interaction of harvest with one or more population processes. Here we consider the role of these interactions, and factors influencing them, on the effective harvest management of waterfowl populations. We review historical ideas concerning harvest and discuss the relationship(s) between waterfowl life histories and the development and application of population models to inform harvest management. The influence of population structure (age, spatial) on derivation of optimal harvest strategies (with and without explicit consideration of various sources of uncertainty) is considered. In addition to population structure, we discuss how the optimal harvest strategy may be influenced by: 1) patterns of density-dependence in one or more vital rates, and 2) heterogeneity in vital rates among individuals within an age-sex-size class. Although derivation of the optimal harvest strategy for simple population models (with or without structure) is generally straightforward, there are several potential difficulties in application. In particular, uncertainty concerning the population structure at the time of harvest, and the ability to regulate the structure of the harvest itself, are significant complications. We therefore review the evidence of effects of harvest on waterfowl populations. Some of this evidence has

Piezoelectric energy harvesting

International Nuclear Information System (INIS)

Howells, Christopher A

2009-01-01

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed.

Development project of contraction, semi-contraction and owner`s-line firewood harvesting; Urakointi-, puoliurakointi- ja isaennaenlinjan polttopuunkorjuun kehittaemisprojekti

Energy Technology Data Exchange (ETDEWEB)

Reponen, K [Tume Oy, Muurame (Finland)

1997-12-31

The objective of the project was to develop a chopwood production method, in which the long length trees are felled, delimbed, cut and if necessary also chopped within the same processing stage. If the conditions so require, the chain has to be possible to change so, that cutting and chopping of stems are centralized and made in the same place, as done usually. A part of the project was focused on transportation and storage of chopwood at drying and utilization site. Available methods and equipment were surveyed in the beginning of the project. The machine and equipment needs of the project were listed. Following machines and equipment were needed: a grapple-loader, a forest trailer, a firewood harvester, a chopwood harvester, and drying, transportation and storage containers. The grapple-loader was designed, constructed in 1994, and testing started at the end of 1994. Testing of the loader continued in 1995. The chopwood harvester, based either on squeeze-cutting or spiral cutting, were tested and appeared to be operational. The operation of the chopwood harvester is based on pulsed feeding. The operation of the harvester can be changed, if needed, to suit for felling of the stem and delimbing, or a device cutting the stems into desired length or a splitting device can be mounted to it. The implementation of the pulsed feeding and delimbing are made traditionally. The construction of the pulsed chopwood harvester was done by a forest owner/inventor entrepreneur. The prototype was ready for testing in summer 1995. Felling and delimbing tests were started immediately. Splitting action has not been constructed yet. Drying/transportation/storage contained will be constructed later

Development project of contraction, semi-contraction and owner`s-line firewood harvesting; Urakointi-, puoliurakointi- ja isaennaenlinjan polttopuunkorjuun kehittaemisprojekti

Energy Technology Data Exchange (ETDEWEB)

Reponen, K. [Tume Oy, Muurame (Finland)

1996-12-31

The objective of the project was to develop a chopwood production method, in which the long length trees are felled, delimbed, cut and if necessary also chopped within the same processing stage. If the conditions so require, the chain has to be possible to change so, that cutting and chopping of stems are centralized and made in the same place, as done usually. A part of the project was focused on transportation and storage of chopwood at drying and utilization site. Available methods and equipment were surveyed in the beginning of the project. The machine and equipment needs of the project were listed. Following machines and equipment were needed: a grapple-loader, a forest trailer, a firewood harvester, a chopwood harvester, and drying, transportation and storage containers. The grapple-loader was designed, constructed in 1994, and testing started at the end of 1994. Testing of the loader continued in 1995. The chopwood harvester, based either on squeeze-cutting or spiral cutting, were tested and appeared to be operational. The operation of the chopwood harvester is based on pulsed feeding. The operation of the harvester can be changed, if needed, to suit for felling of the stem and delimbing, or a device cutting the stems into desired length or a splitting device can be mounted to it. The implementation of the pulsed feeding and delimbing are made traditionally. The construction of the pulsed chopwood harvester was done by a forest owner/inventor entrepreneur. The prototype was ready for testing in summer 1995. Felling and delimbing tests were started immediately. Splitting action has not been constructed yet. Drying/transportation/storage contained will be constructed later

Microfabrication and integration of a sol-gel PZT folded spring energy harvester.

Science.gov (United States)

Lueke, Jonathan; Badr, Ahmed; Lou, Edmond; Moussa, Walied A

2015-05-26

This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy harvesters, such as the diagnosis and rectification of sol-gel PZT film quality and adhesion issues. A packaging and integration methodology was developed to allow for the characterizing the harvesters under a base vibration. The conditioning circuitry developed allowed for a complete energy harvesting system, consisting a harvester, a voltage doubler, a voltage regulator and a NiMH battery. A feasibility study was undertaken with the designed conditioning circuitry to determine the effect of the input parameters on the overall performance of the circuit. It was found that the maximum efficiency does not correlate to the maximum charging current supplied to the battery. The efficiency and charging current must be balanced to achieve a high output and a reasonable output current. The development of the complete energy harvesting system allows for the direct integration of the energy harvesting technology into existing power management schemes for wireless sensing.

Rainwater harvesting - An investigation into the potential for rainwater harvesting in Bradford

OpenAIRE

Doncaster, S.; Blanksby, J.; Shepherd, W.

2012-01-01

This report provides a brief review of rainwater harvesting and rainwater harvesting tools, which are then used in case study examples for domestic, office block and warehouse rain water harvesting scenarios. Rainwater harvesting is placed in an historical context as a source of water supply and in a modern context as being complementary to centralised water distribution networks with benefits for wider water management including flood risk treatment as well as providing environmental and eco...

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K [Eko-Log Oy, Kuopio (Finland)

1997-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K. [Eko-Log Oy, Kuopio (Finland)

1996-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

A knee-mounted biomechanical energy harvester with enhanced efficiency and safety

Science.gov (United States)

Chen, Chao; Chau, Li Yin; Liao, Wei-Hsin

2017-06-01

Energy harvesting is becoming a major limiting issue for many portable devices. When undertaking any activity, the human body generates a significant amount of biomechanical energy, which can be collected by means of a portable energy harvester. This energy provides a method of powering portable devices such as prosthetic limbs. In this paper, a knee-mounted energy harvester with enhanced efficiency and safety is proposed and developed to convert mechanical energy into electricity during human motion. This device can change the bi-directional knee input into uni-directional rotation for an electromagnetic generator using a specially designed transmission system. Without the constraint of induced impact on the human body, this device can harvest biomechanical energy from both knee flexion and extension, improving the harvesting efficiency over previous single-direction energy harvesters. It can also provide protection from device malfunction, and increase the safety of current biomechanical energy harvesters. A highly compact and light prototype is developed taking into account human kinematics. The biomechanical energy harvesting system is also modeled and analyzed. The prototype is tested under different conditions including walking, running and climbing stairs, to evaluate the energy harvesting performance and effect on the human gait. The experimental results show that the prototype can harvest an average power of 3.6 W at 1.5 m s-1 walking speed, which is promising for portable electronic devices.

Procedure and layout for the development of a fatigue test on an agricultural implement by a four poster test bench

Directory of Open Access Journals (Sweden)

M. Cutini

2013-09-01

Full Text Available The increasing demand in agricultural vehicles’ power requirements, payloads and driving speeds increases issues related to tractors and farm implements exposure to solicitations. One of the main factors to be taken into account for fatigue test developing on agricultural machines is the heterogeneity of the environment and activity in which the tractor operates. In particular, for contractors the use in transport conditions both on terrain and road becomes important. As far as transport is concerned. factors mainly affecting solicitations on carried implement are soil profile roughness, tractor settings and forward speed. In this paper, CRA-ING laboratory of Treviglio, Italy, together with Frandent Group s.r.l. (Osasco, Italy, analyse the possibility of creating a solicitation profile by means of one four poster test bench for fatigue test on a carried implement simulating transport conditions. Accelerations at the hubs of the tractor were acquired during transport on terrain and reproduced with one electro-hydraulic four posters test bench on one dummy of a tractor developed for carrying the implement. Artificial bumps were mathematically created and introduced in the time history to simulate squares solicitations. Twelve hours of test were carried out. This experience confirmed the possibility of carrying out laboratory fatigue test on agricultural implements by reproducing specific field conditions solicitations with four poster test bench.

Challenges with mechanical harvesting of blueberries for the fresh market

Science.gov (United States)

Southern highbush blueberries (SHB) (Vaccinium corymbosum L.) are mostly hand harvested for the fresh market. Hand harvesting of blueberry is labor intensive and costly. Efforts are under way to develop blueberry genotypes that will develop less bruising after impact with hard surfaces on the harv...

Fluid flow nozzle energy harvesters

Science.gov (United States)

Sherrit, Stewart; Lee, Hyeong Jae; Walkemeyer, Phillip; Winn, Tyler; Tosi, Luis Phillipe; Colonius, Tim

2015-04-01

Power generation schemes that could be used downhole in an oil well to produce about 1 Watt average power with long-life (decades) are actively being developed. A variety of proposed energy harvesting schemes could be used to extract energy from this environment but each of these has their own limitations that limit their practical use. Since vibrating piezoelectric structures are solid state and can be driven below their fatigue limit, harvesters based on these structures are capable of operating for very long lifetimes (decades); thereby, possibly overcoming a principle limitation of existing technology based on rotating turbo-machinery. An initial survey [1] identified that spline nozzle configurations can be used to excite a vibrating piezoelectric structure in such a way as to convert the abundant flow energy into useful amounts of electrical power. This paper presents current flow energy harvesting designs and experimental results of specific spline nozzle/ bimorph design configurations which have generated suitable power per nozzle at or above well production analogous flow rates. Theoretical models for non-dimensional analysis and constitutive electromechanical model are also presented in this paper to optimize the flow harvesting system.

PROTOCOL FOR HARVESTING ‘BRS PRINCESS’ BANANA FRUITS

Directory of Open Access Journals (Sweden)

LUIZ FERNANDO GANASSALI DE OLIVEIRA JUNIOR

Full Text Available ABSTRACT The aim of this study was to develop a protocol to determine the ideal harvest time for ‘BRS Princess’ banana, using the number of aborted bracts. The bananas were selected according to the number of aborted bracts since the flowering until the time of harvest, yield clusters with 90, 95, 100 and 105 aborted bracts. The physical and chemical analyzes were performed every 3 days on fruits: soluble solids, titratable acidity, weight loss, length and diameter, pH, firmness, skin color (CIELab and pectin enzyme activity. The statistical design was completely randomized in a 4x5 factorial, with 4 points and 5 periods of harvest analysis and data were evaluated using analysis of variance and regression. For all parameters, fruits harvested at 90 and 105 aborted bracts had unwanted changes in its metabolism when compared to the other treatments, while fruits harvested at 95 and 100 aborted bracts had the best post-harvest characteristics. This method was effective in determining the point of harvest in ‘BRS Princess’ banana fruits, since it allows to obtain fruit quality after storage, and is a simple and objective method.

Statistical-QoS Guaranteed Energy Efficiency Optimization for Energy Harvesting Wireless Sensor Networks.

Science.gov (United States)

Gao, Ya; Cheng, Wenchi; Zhang, Hailin

2017-08-23

Energy harvesting, which offers a never-ending energy supply, has emerged as a prominent technology to prolong the lifetime and reduce costs for the battery-powered wireless sensor networks. However, how to improve the energy efficiency while guaranteeing the quality of service (QoS) for energy harvesting based wireless sensor networks is still an open problem. In this paper, we develop statistical delay-bounded QoS-driven power control policies to maximize the effective energy efficiency (EEE), which is defined as the spectrum efficiency under given specified QoS constraints per unit harvested energy, for energy harvesting based wireless sensor networks. For the battery-infinite wireless sensor networks, our developed QoS-driven power control policy converges to the Energy harvesting Water Filling (E-WF) scheme and the Energy harvesting Channel Inversion (E-CI) scheme under the very loose and stringent QoS constraints, respectively. For the battery-finite wireless sensor networks, our developed QoS-driven power control policy becomes the Truncated energy harvesting Water Filling (T-WF) scheme and the Truncated energy harvesting Channel Inversion (T-CI) scheme under the very loose and stringent QoS constraints, respectively. Furthermore, we evaluate the outage probabilities to theoretically analyze the performance of our developed QoS-driven power control policies. The obtained numerical results validate our analysis and show that our developed optimal power control policies can optimize the EEE over energy harvesting based wireless sensor networks.

Analysis of factors affecting the mechanical olive harvesting in Guilan province

Directory of Open Access Journals (Sweden)

H Abedi

2017-05-01

Full Text Available Introduction Olive is one of the most valuable worldwide trees that produces useful products having high nutritional values. It is widely grown in many parts of world. The cost of olives hand picking is estimated to be about two-thirds of the total gross return of olive production. Therefore, various types of olive harvesting machineries were developed in the world. Guilan Province of Iran is one of the leading regions for olives production in Iran. At the present time, almost all olives produced in Guilan province of Iran are manually harvested. Review of the reports showed that no research was performed to study the factors affecting the development of mechanized olive picking in Guilan Province, Iran. Due to the complexity of using the olive harvest machineries, identifying the factors affecting of their application is essential. Therefore, a Delphi study were conducted to identify and analysis the drivers and barriers for mechanized olive harvest in Guilan province, Iran. Materials and Methods This research was conducted using the Delphi technique in Guilan Province, Northern Iran. Delphi technique is a structured process to gather and classify the knowledge of a group of experts. Through consultation with professors and researchers in related institutions, 22 experts from the subsidiary offices of agricultural organization of Guilan Province were selected for the study. In the first round of the study, the participants were asked to answer to two open questions about the driving factors and barriers of mechanical olive harvest in Guilan Province. Nineteen items were found as driving factors and seventeen as barriers for developing the mechanical olive harvesting in Guilan Province. In the second phase of the study, the respondents were asked to answer to the all items written in the form of a five-level Likert scale, and finally, experts of panel were asked to answer to the top 10 items of driving factors and barriers in percent form. The

Harvest time and post-harvest quality of Fuyu persimmon treated before harvest with gibberellic acid and aminoetoxyvinilglycine

Directory of Open Access Journals (Sweden)

Ricardo Antonio Ayub

2008-12-01

Full Text Available The aim of this work was to evaluate the effects of gibberellic acid (GA3 and aminoetoxyvinilglycine (AVG applied in preharvest spraying, on the retardation of the harvest and on the quality of persimmon fruits cv. Fuyu. The experiment was carried in randomized complete block design. The treatments were: control, 136mgL-1 of AVG, 272 mgL-1 of AVG, 36mgL-1 of GA3, 72mgL-1 of GA3 and 136mgL-1 of AVG + 36mgL-1 of GA3, spraying 30 days before the first harvest. The fruits were harvested twice and stored at 4ºC. The chemical and physical evaluations of the fruits were carried out the date of the harvest and at intervals of 15 days followed by four days at 20ºC. In conclusion, the application of AVG (136mgL-1 or GA3 (72mgL-1 maintained the firmness of the fruits and delayed harvest by twenty days. However, fruits harvested in the initial state of ripening were more sensitive to chilling injury and were unable to support 15 days of storage at 4ºC. The plant growth regulators were not efficient in prolonged storage due to the fact that the concentration of sugars was lower in the treatments than in the control.

Analytical coupled modeling of a magneto-based acoustic metamaterial harvester

Science.gov (United States)

Nguyen, H.; Zhu, R.; Chen, J. K.; Tracy, S. L.; Huang, G. L.

2018-05-01

Membrane-type acoustic metamaterials (MAMs) have demonstrated unusual capacity in controlling low-frequency sound transmission, reflection, and absorption. In this paper, an analytical vibro-acoustic-electromagnetic coupling model is developed to study MAM harvester sound absorption, energy conversion, and energy harvesting behavior under a normal sound incidence. The MAM harvester is composed of a prestressed membrane with an attached rigid mass, a magnet coil, and a permanent magnet coin. To accurately capture finite-dimension rigid mass effects on the membrane deformation under the variable magnet force, a theoretical model based on the deviating acoustic surface Green’s function approach is developed by considering the acoustic near field and distributed effective shear force along the interfacial boundary between the mass and the membrane. The accuracy and capability of the theoretical model is verified through comparison with the finite element method. In particular, sound absorption, acoustic-electric energy conversion, and harvesting coefficient are quantitatively investigated by varying the weight and size of the attached mass, prestress and thickness of the membrane. It is found that the highest achievable conversion and harvesting coefficients can reach up to 48%, and 36%, respectively. The developed model can serve as an efficient tool for designing MAM harvesters.

heteroHarvest: Harvesting Information from Heterogeneous Sources

DEFF Research Database (Denmark)

Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversity...... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. Finally we describe the results of experimental evaluation. The results are found promising with an overall error rate equal to 6.5% across heterogeneous formats....

The Effect of Urban Sprawls on Timber Harvesting

Science.gov (United States)

Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

1998-01-01

In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

Toward a semi-mechanical harvesting platform system for harvesting blueberries with fresh-market quality

Science.gov (United States)

Major concerns related to harvesting blueberries for fresh market with over-the-row (OTR) harvesters are that the quality of the fruit harvested with OTR machines is generally low and ground loss is excessive. Machine-harvested blueberries have more internal bruise and usually soften rapidly in col...

Using value stream mapping technique through the lean production transformation process: An implementation in a large-scaled tractor company

Directory of Open Access Journals (Sweden)

Mehmet Rıza Adalı

2017-04-01

Full Text Available Today’s world, manufacturing industries have to continue their development and continuity in more competitive environment via decreasing their costs. As a first step in the lean production process transformation is to analyze the value added activities and non-value adding activities. This study aims at applying the concepts of Value Stream Mapping (VSM in a large-scaled tractor company in Sakarya. Waste and process time are identified by mapping the current state in the production line of platform. The future state was suggested with improvements for elimination of waste and reduction of lead time, which went from 13,08 to 4,35 days. Analysis are made using current and future states to support the suggested improvements and cycle time of the production line of platform is improved 8%. Results showed that VSM is a good alternative in the decision-making for change in production process.

Piezoelectric energy harvesting

Energy Technology Data Exchange (ETDEWEB)

Howells, Christopher A [Power Technology Branch, US Army, CERDEC, C2D, Ft. Belvoir, VA 22060-5816 (United States)

2009-07-15

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed. (author)

Microfabrication and Integration of a Sol-Gel PZT Folded Spring Energy Harvester

Directory of Open Access Journals (Sweden)

Jonathan Lueke

2015-05-01

Full Text Available This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy harvesters, such as the diagnosis and rectification of sol-gel PZT film quality and adhesion issues. A packaging and integration methodology was developed to allow for the characterizing the harvesters under a base vibration. The conditioning circuitry developed allowed for a complete energy harvesting system, consisting a harvester, a voltage doubler, a voltage regulator and a NiMH battery. A feasibility study was undertaken with the designed conditioning circuitry to determine the effect of the input parameters on the overall performance of the circuit. It was found that the maximum efficiency does not correlate to the maximum charging current supplied to the battery. The efficiency and charging current must be balanced to achieve a high output and a reasonable output current. The development of the complete energy harvesting system allows for the direct integration of the energy harvesting technology into existing power management schemes for wireless sensing.

Analisi delle vibrazioni su trattori agricoli in normali condizioni di lavoro e in condizioni predefinite - Vibration analysis on agricultural tractors in normal working conditions and in predetermined conditions

Directory of Open Access Journals (Sweden)

Alessandro Peretti

2015-10-01

Full Text Available Commentata la diffusione dei trattori agricoli in Italia e svolta una rassegna degli effetti delle vibrazioni sui trattoristi, sono riportati i valori delle accelerazioni riscontrati nel nostro Paese, nonché i livelli di esposizione degli operatori. Individuati i parametri che determinano le vibrazioni, sono illustrati gli interventi in grado di contenerle. Sono inoltre riportati i risultati di una ricerca su tre trattori agricoli: i rilievi delle vibrazioni triassiali sul piano e sul basamento del sedile e le misure del rumore in prossimità di ambedue gli orecchi dell’operatore sono stati eseguiti durante l’aratura, l’erpicatura e la traslazione su strada sterrata e asfaltata, a diverse velocità di avanzamento e a differenti valori di pressione di gonfiaggio degli pneumatici. ------ After the assessment of the agricultural tractors fleet characteristics in Italy and a review of the effects of vibration on tractor drivers, the typical acceleration values and consequent operators’ exposure levels in carrying out agricultural operations are reported. Once having ascertained the parameters that produce the vibrations, the actions more suitable to reduce the risk factors are shown. The results of a series of comparative tests on three used tractors of different age are then reported: the levels of tri-axial vibrations on the seat cushion and base and of the noise at both operator’s ears were recorded during ploughing, harrowing and driving on farm and paved roads, at different speeds and varying the tyres inflation pressure.

Engineered Nanomaterials for Energy Harvesting and Storage Applications

Science.gov (United States)

Gullapalli, Hemtej

Energy harvesting and storage are independent mechanisms, each having their own significance in the energy cycle. Energy is generally harvested from temperature variations, mechanical vibrations and other phenomena which are inherently sporadic in nature, harvested energy stands a better chance of efficient utilization if it can be stored and used later, depending on the demand. In essence a comprehensive device that can harness power from surrounding environment and provide a steady and reliable source of energy would be ideal. Towards realizing such a system, for the harvesting component, a piezoelectric nano-composite material consisting of ZnO nanostructures embedded into the matrix of 'Paper' has been developed. Providing a flexible backbone to a brittle material makes it a robust architecture. Energy harvesting by scavenging both mechanical and thermal fluctuations using this flexible nano-composite is discussed in this thesis. On the energy storage front, Graphene based materials developed with a focus towards realizing ultra-thin lithium ion batteries and supercapacitors are introduced. Efforts for enhancing the energy storage performance of such graphitic carbon are detailed. Increasing the rate capability by direct CVD synthesis of graphene on current collectors, enhancing its electrochemical capacity through doping and engineering 3D metallic structures to increase the areal energy density have been studied.

Reaping a Harvest of Hope - Continuum Magazine | NREL

Science.gov (United States)

Reaping a Harvest of Hope On May 4, 2007, an EF-5 tornado-the highest rating of tornados-tore Reaping a Harvest of Hope Five years after a devastating tornado, Greensburg, Kansas, has new energy and a city also relied on NREL's life-cycle cost analysis and its extensive energy project development and

Sustained operation of sensor nodes with energy harvesters and supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Renner, Bernd-Christian

2013-06-01

Sensor nodes powered by energy harvesters and supercapacitors open the door to unlimited and uninterrupted operation. This dissertation closes the persistent gap of system integration w.r.t. holistic online energy assessment, develops a new concept for harvest forecasting while assessing the behavior and quality of known approaches, and proposes a novel load adaptation scheme to achieve sustained and uniform sensor node operation with low complexity and computational overhead. For this purpose, a prototype of an energy harvester with a supercapacitor for off-the-shelf sensor nodes is developed and used for practical evaluation.

Do biomass harvesting guidelines influence herpetofauna following harvests of logging residues for renewable energy?.

Science.gov (United States)

Fritts, Sarah; Moorman, Christopher; Grodsky, Steven; Hazel, Dennis; Homyack, Jessica; Farrell, Chris; Castleberry, Steven

2016-04-01

Forests are a major supplier of renewable energy; however, gleaning logging residues for use as woody biomass feedstock could negatively alter habitat for species dependent on downed wood. Biomass Harvesting Guidelines (BHGs) recommend retaining a portion of woody biomass on the forest floor following harvest. Despite BHGs being developed to help ensure ecological sustainability, their contribution to biodiversity has not been evaluated experimentally at operational scales. We compared herpetofauanal evenness, diversity, and richness and abundance of Anaxyrus terrestris and Gastrophryne carolinensis among six treatments that varied in volume and spatial arrangement of woody biomass retained after clearcutting loblolly pine (Pinus taeda) plantations in North Carolina, USA (n = 4), 2011-2014 and Georgia (n = 4), USA 2011-2013. Treatments were: (1) biomass harvest with no BHGs, (2) 15% retention with biomass clustered, (3) 15% retention with biomass dispersed, (4) 30% retention with biomass clustered, (5) 30% retention with biomass dispersed, and (6) no biomass harvest. We captured individuals with drift fence arrays and compared evenness, diversity, and richness metrics among treatments with repeated-measure, linear mixed-effects models. We determined predictors of A. terrestris and G. carolinensis abundances using a priori candidate N-mixture models with woody biomass volume, vegetation structure, and groundcover composition as covariates. We had 206 captures of 25 reptile species and 8710 captures of 17 amphibian species during 53690 trap nights. Herpetofauna diversity, evenness, and richness were similar among treatments. A. terrestris abundance was negatively related to volume of retained woody biomass in treatment units in North Carolina in 2013. G. carolinensis abundance was positively related with volume of retained woody debris in treatment units in Georgia in 2012. Other relationships between A. terrestris and G. carolinensis abundances and habitat metrics

Stand, Harvest, and Equipment Interactions in Simulated Harvesting Prescriptions

Science.gov (United States)

Jingxin Wang; W. Dale Greene; Bryce J. Stokes

1998-01-01

We evaluated potential interactions of stand type, harvesting method, and equipment in an experiment using interactive simulation. We examined three felling methods (chain saw, feller-buncher, harvester) and two extraction methods (grapple skidder and forwarder) performing clearcuts, sheltenvood cuts, and single-tree selection cuts in both an uneven-aged natural stand...

Effect of time of harvest, stage of fruit ripening, and post-harvest ...

African Journals Online (AJOL)

Seeds were extracted from half of the fruits harvested from each stage immediately after harvest while the other halves were stored at room temperature to ripen to the soft-red stage before seed extraction. Fruit weight in both cultivars decreased with plant age. Fruits harvested at the yellow-ripe stage produced the highest ...

Impact of mechanized logging operations on wet and dry soils of ...

African Journals Online (AJOL)

Mechanization of timber harvesting operations in Tanzania involves use of machinery such as feller bunchers, skidders and tractors which are generally heavy in weight ranging from 12 to 16 tones in unloaded state. The movements of these machines induce soil compaction owing to the exerted normal pressure, vibrations ...

Energy harvesting solar, wind, and ocean energy conversion systems

CERN Document Server

Khaligh, Alireza

2009-01-01

Also called energy scavenging, energy harvesting captures, stores, and uses ""clean"" energy sources by employing interfaces, storage devices, and other units. Unlike conventional electric power generation systems, renewable energy harvesting does not use fossil fuels and the generation units can be decentralized, thereby significantly reducing transmission and distribution losses. But advanced technical methods must be developed to increase the efficiency of devices in harvesting energy from environmentally friendly, ""green"" resources and converting them into electrical energy.Recognizing t

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

NARCIS (Netherlands)

Matova, S.P.; Elfrink, R.; Vullers, R.J.M.; Schaijk, R. van

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with

Fog Harvesting with Harps.

Science.gov (United States)

Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

2018-04-11

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

A seesaw-type approach for enhancing nonlinear energy harvesting

Science.gov (United States)

Deng, Huaxia; Wang, Zhemin; Du, Yu; Zhang, Jin; Ma, Mengchao; Zhong, Xiang

2018-05-01

Harvesting sustainable mechanical energy is the ultimate objective of nonlinear energy harvesters. However, overcoming potential barriers, especially without the use of extra excitations, poses a great challenge for the development of nonlinear generators. In contrast to the existing methods, which typically modify the barrier height or utilize additional excitations, this letter proposes a seesaw-type approach to facilitate escape from potential wells by transfer of internal energy, even under low-intensity excitation. This approach is adopted in the design of a seesaw-type nonlinear piezoelectric energy harvester and the energy transfer process is analyzed by deriving expressions for the energy to reveal the working mechanism. Comparison experiments demonstrate that this approach improves energy harvesting in terms of an increase in the working frequency bandwidth by a factor of 60.14 and an increase in the maximum output voltage by a factor of 5.1. Moreover, the output power is increased by a factor of 51.3, which indicates that this approach significantly improves energy collection efficiency. This seesaw-type approach provides a welcome boost to the development of renewable energy collection methods by improving the efficiency of harvesting of low-intensity ambient mechanical energy.

Pen harvester for powering a pulse rate sensor

International Nuclear Information System (INIS)

Bedekar, Vishwas; Oliver, Josiah; Priya, Shashank

2009-01-01

Rapid developments in the area of micro-sensors for various applications such as structural health monitoring, bio-chemical sensors and pressure sensors have increased the demand for portable, low cost, high efficiency energy harvesting devices. In this paper, we describe the scheme for powering a pulse rate sensor with a vibration energy harvester integrated inside a pen commonly carried by humans in the pocket close to the heart. Electromagnetic energy harvesting was selected in order to achieve high power at lower frequencies. The prototype pen harvester was found to generate 3 mW at 5 Hz and 1 mW at 3.5 Hz operating under displacement amplitude of 16 mm (corresponding to an acceleration of approximately 1.14 g rms at 5 Hz and 0.56 g rms at 3.5 Hz, respectively). A comprehensive mathematical modelling and simulations were performed in order to optimize the performance of the vibration energy harvester. The integrated pen harvester prototype was found to generate continuous power of 0.46-0.66 mW under normal human actions such as jogging and jumping which is enough for a small scale pulse rate sensor.

Finite element modeling of nonlinear piezoelectric energy harvesters with magnetic interaction

International Nuclear Information System (INIS)

Upadrashta, Deepesh; Yang, Yaowen

2015-01-01

Piezoelectric energy harvesting from ambient vibrations is a potential technology for powering wireless sensors and low power electronic devices. The conventional linear harvesters suffer from narrow operational bandwidth. Many attempts have been made especially using the magnetic interaction to broaden the bandwidth of harvesters. The finite element (FE) modeling has been used only for analyzing the linear harvesters in the literature. The main difficulties in extending the FE modeling to analyze the nonlinear harvesters involving magnetic interaction are developing the mesh needed for magnetic interaction in dynamic problems and the high demand on computational resource needed for solving the coupled electrical–mechanical–magnetic problem. In this paper, an innovative method is proposed to model the magnetic interaction without inclusion of the magnetic module. The magnetic force is modeled using the nonlinear spring element available in ANSYS finite element analysis (FEA) package, thus simplifying the simulation of nonlinear piezoelectric energy harvesters as an electromechanically coupled problem. Firstly, an FE model of a monostable nonlinear harvester with cantilever configuration is developed and the results are validated with predictions from the theoretical model. Later, the proposed technique of FE modeling is extended to a complex 2-degree of freedom nonlinear energy harvester for which an accurate analytical model is difficult to derive. The performance predictions from FEA are compared with the experimental results. It is concluded that the proposed modeling technique is able to accurately analyze the behavior of nonlinear harvesters with magnetic interaction. (paper)

Flotation: A promising microalgae harvesting and dewatering technology for biofuels production.

Science.gov (United States)

Ndikubwimana, Theoneste; Chang, Jingyu; Xiao, Zongyuan; Shao, Wenyao; Zeng, Xianhai; Ng, I-Son; Lu, Yinghua

2016-03-01

Microalgal biomass as renewable energy source is believed to be of great potential for reliable and sustainable biofuels production. However, microalgal biomass production is pinned by harvesting and dewatering stage thus hindering the developing and growing microalgae biotechnology industries. Flotation technology applied in mineral industry could be potentially applied in microalgae harvesting and dewatering, however substantial knowledge on different flotation units is essential. This paper presents an overview on different flotation units as promising cost-effective technologies for microalgae harvesting thus bestowing for further research in development and commercialization of microalgae based biofuels. Dispersed air flotation was found to be less energy consuming. Moreover, Jameson cell flotation and dispersed ozone flotation are believed to be energy efficient microalgae flotation approaches. Microalgae harvesting and dewatering by flotation is still at embryonic stage, therefore extended studies with the focus on life cycle assessment, sustainability of the flotation unit, optimization of the operating parameters using different algal species is imperative. Though there are a number of challenges in microalgae harvesting and dewatering, with well designed and developed cultivation, harvesting/dewatering, extraction and conversion technologies, progressively, microalgae technology will be of great potential for biological carbon sequestration, biofuels and biochemicals production. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Protocol and Practice in the Adaptive Management of Waterfowl Harvests

Directory of Open Access Journals (Sweden)

Fred Johnson

1999-06-01

Full Text Available Waterfowl harvest management in North America, for all its success, historically has had several shortcomings, including a lack of well-defined objectives, a failure to account for uncertain management outcomes, and inefficient use of harvest regulations to understand the effects of management. To address these and other concerns, the U.S. Fish and Wildlife Service began implementation of adaptive harvest management in 1995. Harvest policies are now developed using a Markov decision process in which there is an explicit accounting for uncontrolled environmental variation, partial controllability of harvest, and structural uncertainty in waterfowl population dynamics. Current policies are passively adaptive, in the sense that any reduction in structural uncertainty is an unplanned by-product of the regulatory process. A generalization of the Markov decision process permits the calculation of optimal actively adaptive policies, but it is not yet clear how state-specific harvest actions differ between passive and active approaches. The Markov decision process also provides managers the ability to explore optimal levels of aggregation or "management scale" for regulating harvests in a system that exhibits high temporal, spatial, and organizational variability. Progress in institutionalizing adaptive harvest management has been remarkable, but some managers still perceive the process as a panacea, while failing to appreciate the challenges presented by this more explicit and methodical approach to harvest regulation. Technical hurdles include the need to develop better linkages between population processes and the dynamics of landscapes, and to model the dynamics of structural uncertainty in a more comprehensive fashion. From an institutional perspective, agreement on how to value and allocate harvests continues to be elusive, and there is some evidence that waterfowl managers have overestimated the importance of achievement-oriented factors in

Adaptive learning algorithms for vibration energy harvesting

International Nuclear Information System (INIS)

Ward, John K; Behrens, Sam

2008-01-01

By scavenging energy from their local environment, portable electronic devices such as MEMS devices, mobile phones, radios and wireless sensors can achieve greater run times with potentially lower weight. Vibration energy harvesting is one such approach where energy from parasitic vibrations can be converted into electrical energy through the use of piezoelectric and electromagnetic transducers. Parasitic vibrations come from a range of sources such as human movement, wind, seismic forces and traffic. Existing approaches to vibration energy harvesting typically utilize a rectifier circuit, which is tuned to the resonant frequency of the harvesting structure and the dominant frequency of vibration. We have developed a novel approach to vibration energy harvesting, including adaptation to non-periodic vibrations so as to extract the maximum amount of vibration energy available. Experimental results of an experimental apparatus using an off-the-shelf transducer (i.e. speaker coil) show mechanical vibration to electrical energy conversion efficiencies of 27–34%

Have we to harvest the contaminated wheats?

International Nuclear Information System (INIS)

Tannenberg, P. de

1997-01-01

The institute of nuclear protection and safety (IPSN) has just developed a calculation method allowing to evaluate the radioactive contamination of harvesting. This tool would allow, in case of nuclear accident, to determine if the contaminated lands under cultivation are eatable or not. Two radionuclides have been chosen: cesium 137 and strontium 90. The experiments are conclusive: the experimental releases of cesium and strontium were comparable to these ones of the Chernobyl forbidden zone (between 10 and 40 millions of becquerels/m 2 ): the foliar contamination is proportional to the plants development. Wheats ready to be harvested capture more than 80% of the radioactivity that contaminates them. Leaves of young plants keep only 20 to 40 %. Second result: cesium is more easily washable than strontium. Third results: more late is the contamination more the plant will be irradiated; then,the wheats contaminated when they are just out of ground are nine times less contaminated than cereals contaminated just before the harvest. (N.C.)

Canadian peat harvesting and the environment

International Nuclear Information System (INIS)

Keys, D.

1992-01-01

In 1990, ca 749,000 tonnes of peat were sold by Canadian producers, a small volume in comparison to the estimated 50 million tonnes or more that accumulate naturally each year in Canada. Most of the harvested peat was used for horticultural purposes. The relationship between peatlands and the peat industry is examined, and issues related to the environment and sustainable resource use are discussed. Case studies are used to examine several specific situations where peatland development proposals have undergone environmental assessments. The present status of peatland conservation in Canada is reviewed. To date, developed peatlands are primarily situated in the boreal wetland regions and consist mainly of the bog wetland class. Environmental issues related to peatland development include the need for conservation of flora, fauna, and other ecological values or functions. The potential for release of carbon gases due to Canadian peat harvesting is considered to be insignificant in relation to other uses of carbon sources such as the combustion of fossil fuel, and is unlikely to influence global warming at the present or projected levels of peatland development in Canada. The influence and mitigation of the effects of drainage of peatlands for peat production on water quality and flow regime are being addressed on a site-specific basis through existing regulatory procedures and research. Reclamation and restoration options are being incorporated during design and operational development of new peat harvesting areas. 39 refs., 15 figs., 3 tabs

Microalgae harvesting techniques: A review.

Science.gov (United States)

Singh, Gulab; Patidar, S K

2018-07-01

Microalgae with wide range of commercial applications have attracted a lot of attention of the researchers in the last few decades. However, microalgae utilization is not economically sustainable due to high cost of harvesting. A wide range of solid - liquid separation techniques are available for microalgae harvesting. The techniques include coagulation and flocculation, flotation, centrifugation and filtration or a combination of various techniques. Despite the importance of harvesting to the economics and energy balance, there is no universal harvesting technique for microalgae. Therefore, this review focuses on assessing technical, economical and application potential of various harvesting techniques so as to allow selection of an appropriate technology for cost effectively harvesting of microalgae from their culture medium. Various harvesting and concentrating techniques of microalgae were reviewed to suggest order of suitability of the techniques for four main microalgae applications i.e biofuel, human and animal food, high valued products, and water quality restoration. For deciding the order of suitability, a comparative analysis of various harvesting techniques based on the six common criterions (i.e biomass quality, cost, biomass quantity, processing time, species specific and toxicity) has been done. Based on the order of various techniques vis-a-vis various criteria and preferred order of criteria for various applications, order of suitability of harvesting techniques for various applications has been decided. Among various harvesting techniques, coagulation and flocculation, centrifugation and filtration were found to be most suitable for considered applications. These techniques may be used alone or in combination for increasing the harvesting efficiency. Copyright © 2018 Elsevier Ltd. All rights reserved.

Architectures for wrist-worn energy harvesting

Science.gov (United States)

Rantz, R.; Halim, M. A.; Xue, T.; Zhang, Q.; Gu, L.; Yang, K.; Roundy, S.

2018-04-01

This paper reports the simulation-based analysis of six dynamical structures with respect to their wrist-worn vibration energy harvesting capability. This work approaches the problem of maximizing energy harvesting potential at the wrist by considering multiple mechanical substructures; rotational and linear motion-based architectures are examined. Mathematical models are developed and experimentally corroborated. An optimization routine is applied to the proposed architectures to maximize average power output and allow for comparison. The addition of a linear spring element to the structures has the potential to improve power output; for example, in the case of rotational structures, a 211% improvement in power output was estimated under real walking excitation. The analysis concludes that a sprung rotational harvester architecture outperforms a sprung linear architecture by 66% when real walking data is used as input to the simulations.

Manufacturing of Proteins and Antibodies: Chapter Downstream Processing Technologies : Harvest Operations.

Science.gov (United States)

Turner, Richard; Joseph, Adrian; Titchener-Hooker, Nigel; Bender, Jean

2017-08-04

Cell harvesting is the separation or retention of cells and cellular debris from the supernatant containing the target molecule Selection of harvest method strongly depends on the type of cells, mode of bioreactor operation, process scale, and characteristics of the product and cell culture fluid. Most traditional harvesting methods use some form of filtration, centrifugation, or a combination of both for cell separation and/or retention. Filtration methods include normal flow depth filtration and tangential flow microfiltration. The ability to scale down predictably the selected harvest method helps to ensure successful production and is critical for conducting small-scale characterization studies for confirming parameter targets and ranges. In this chapter we describe centrifugation and depth filtration harvesting methods, share strategies for harvest optimization, present recent developments in centrifugation scale-down models, and review alternative harvesting technologies.

Tree regeneration and future stand development after bark beetle infestation and harvesting in Colorado lodgepole pine stands

Science.gov (United States)

Byron J. Collins; Charles C. Rhoades; Robert M. Hubbard; Michael A. Battaglia

2011-01-01

In the southern Rocky Mountains, current mountain pine beetle (Dendroctonus ponderosae Hopkins) outbreaks and associated harvesting have set millions of hectares of lodgepole pine (Pinus contorta var. latifolia Engelm. ex Wats.) forest onto new stand development trajectories. Information about immediate, post-disturbance tree regeneration will provide insight on...

Balance de potencia del conjunto formado por el tractor New Holland 6610s y la sembradora v-20

OpenAIRE

Pedro R. Mayans-Céspedes; José R. Soca-Cabrera; Gilberto López Canteñs

2009-01-01

En el presente trabajo se reflejan los resultados de la prueba de tracción y potencia a la toma de fuerza de la sembradora V-204, formando conjunto con el tractor New Holland 6610s4. Para las pruebas se contó con los instrumentos, medios de medición e instalaciones del Centro Nacional de Estandarización de Maquinaria Agrícola, utilizándose la NMX "Método de evaluación de sembradoras y/o fertilizadoras de tracción mecánica con dosificador de disco" y la NC Máquinas agropecuarias y forestales, ...

Energy harvesting from low frequency applications using piezoelectric materials

International Nuclear Information System (INIS)

Li, Huidong; Tian, Chuan; Deng, Z. Daniel

2014-01-01

In an effort to eliminate the replacement of the batteries of electronic devices that are difficult or impractical to service once deployed, harvesting energy from mechanical vibrations or impacts using piezoelectric materials has been researched over the last several decades. However, a majority of these applications have very low input frequencies. This presents a challenge for the researchers to optimize the energy output of piezoelectric energy harvesters, due to the relatively high elastic moduli of piezoelectric materials used to date. This paper reviews the current state of research on piezoelectric energy harvesting devices for low frequency (0–100 Hz) applications and the methods that have been developed to improve the power outputs of the piezoelectric energy harvesters. Various key aspects that contribute to the overall performance of a piezoelectric energy harvester are discussed, including geometries of the piezoelectric element, types of piezoelectric material used, techniques employed to match the resonance frequency of the piezoelectric element to input frequency of the host structure, and electronic circuits specifically designed for energy harvesters

Modeling ground-based timber harvesting systems using computer simulation

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux

2001-01-01

Modeling ground-based timber harvesting systems with an object-oriented methodology was investigated. Object-oriented modeling and design promote a better understanding of requirements, cleaner designs, and better maintainability of the harvesting simulation system. The model developed simulates chainsaw felling, drive-to-tree feller-buncher, swing-to-tree single-grip...

Solar Power for Post Harvest Losses - A Sensible Solution for Developing Countries!

Energy Technology Data Exchange (ETDEWEB)

Maheshwar, C.; Chilukuri, Snigdha

2010-09-15

About 30% of horticultural crops grown in developing countries like India (38.77 million tonnes amounting to US $13 billion), get wasted annually due to gaps in Cold Chain like insufficient cold storage capacity, unavailability of cold storages in close proximity to farms, poor transportation infrastructure etc. With solar energy availability (Insolation) averaging 5.0 KWh/sq. m/day with 3000 hours of sunshine every year, about 30-35% of these losses can be reduced by transporting the freshly harvested produce to the cold storages in 40,000 TEUs of refrigerated containers with 5 million sq. ft. of solar PV panels fixed on their rooftops and sides.

An optimal staggered harvesting strategy for herbaceous biomass energy crops

Energy Technology Data Exchange (ETDEWEB)

Bhat, M.G.; English, B.C. [Univ. of Tennessee, Knoxville, TN (United States)

1993-12-31

Biofuel research over the past two decades indicates lignocellulosic crops are a reliable source of feedstock for alternative energy. However, under the current technology of producing, harvesting and converting biomass crops, the cost of biofuel is not competitive with conventional biofuel. Cost of harvesting biomass feedstock is a single largest component of feedstock cost so there is a cost advantage in designing a biomass harvesting system. Traditional farmer-initiated harvesting operation causes over investment. This study develops a least-cost, time-distributed (staggered) harvesting system for example switch grass, that calls for an effective coordination between farmers, processing plant and a single third-party custom harvester. A linear programming model explicitly accounts for the trade-off between yield loss and benefit of reduced machinery overhead cost, associated with the staggered harvesting system. Total cost of producing and harvesting switch grass will decline by 17.94 percent from conventional non-staggered to proposed staggered harvesting strategy. Harvesting machinery cost alone experiences a significant reduction of 39.68 percent from moving from former to latter. The net return to farmers is estimated to increase by 160.40 percent. Per tonne and per hectare costs of feedstock production will decline by 17.94 percent and 24.78 percent, respectively. These results clearly lend support to the view that the traditional system of single period harvesting calls for over investment on agricultural machinery which escalates the feedstock cost. This social loss to the society in the form of escalated harvesting cost can be avoided if there is a proper coordination among farmers, processing plant and custom harvesters as to when and how biomass crop needs to be planted and harvested. Such an institutional arrangement benefits producers, processing plant and, in turn, end users of biofuels.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

Science.gov (United States)

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Harvesting options of small-diameter wood from early thinnings

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Petty, A. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), e-mail: arto.mutikainen@tts.fi

2010-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased steadily in young forests in Finland during the last three years. The studies carried out by Metsaeteho Oy and TTS Research (i) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (ii) clarified the development of the total removal in integrated harvesting operation, and (iii) investigated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increase significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerable, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a weight scale attached to the crane of the forwarder. As the studies indicated very promising results with integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinnings in Finland. (orig.)

Timber harvest as the predominant disturbance regime in northeastern U.S. forests: Effects of harvest intensification

Science.gov (United States)

Brown, Michelle L.; Canham, Charles D.; Murphy, Lora; Donovan, Therese M.

2018-01-01

Harvesting is the leading cause of adult tree mortality in forests of the northeastern United States. While current rates of timber harvest are generally sustainable, there is considerable pressure to increase the contribution of forest biomass to meet renewable energy goals. We estimated current harvest regimes for different forest types and regions across the U.S. states of New York, Vermont, New Hampshire, and Maine using data from the U.S. Forest Inventory and Analysis Program. We implemented the harvest regimes in SORTIE‐ND, an individual‐based model of forest dynamics, and simulated the effects of current harvest regimes and five additional harvest scenarios that varied by harvest frequency and intensity over 150 yr. The best statistical model for the harvest regime described the annual probability of harvest as a function of forest type/region, total plot basal area, and distance to the nearest improved road. Forests were predicted to increase in adult aboveground biomass in all harvest scenarios in all forest type and region combinations. The magnitude of the increase, however, varied dramatically—increasing from 3% to 120% above current landscape averages as harvest frequency and intensity decreased. The variation can be largely explained by the disproportionately high harvest rates estimated for Maine as compared with the rest of the region. Despite steady biomass accumulation across the landscape, stands that exhibited old‐growth characteristics (defined as ≥300 metric tons of biomass/hectare) were rare (8% or less of stands). Intensified harvest regimes had little effect on species composition due to widespread partial harvesting in all scenarios, resulting in dominance by late‐successional species over time. Our analyses indicate that forest biomass can represent a sustainable, if small, component of renewable energy portfolios in the region, although there are tradeoffs between carbon sequestration in forest biomass and sustainable

Least limiting water range in assessing compaction in a Brazilian Cerrado latosol growing sugarcane

Directory of Open Access Journals (Sweden)

Wainer Gomes Gonçalves

2014-04-01

Full Text Available In the south-central region of Brazil, there is a trend toward reducing the sugarcane inter-harvest period and increasing traffic of heavy harvesting machinery on soil with high water content, which may intensify the compaction process. In this study, we assessed the structural changes of a distroferric Red Latosol (Oxisol by monitoring soil water content as a function of the Least Limiting Water Range (LLWR and quantified its effects on the crop yield and industrial quality of the first ratoon crop of sugarcane cultivars with different maturation cycles. Three cultivars (RB 83-5054, RB 84-5210 and RB 86-7515 were subjected to four levels of soil compaction brought about by a differing number of passes of a farm tractor (T0 = soil not trafficked, T2 = 2 passes, T10 = 10 passes, and T20 = 20 passes of the tractor in the same place in a 3 × 4 factorial arrangement with three replications. The deleterious effects on the soil structure from the farm machinery traffic were limited to the surface layer (0-10 cm of the inter-row area of the ratoon crop. The LLWR dropped to nearly zero after 20 tractor passes between the cane rows. We detected differences among the cultivars studied; cultivar RB 86-7515 stood out for its industrial processing quality, regardless of the level of soil compaction. Monitoring of soil moisture in the crop showed exposure to water stress conditions, although soil compaction did not affect the production variables of the sugarcane cultivars. We thus conclude that the absence of traffic on the plant row maintained suitable soil conditions for plant development and may have offset the harmful effects of soil compaction shown by the high values for bulk density between the rows of the sugarcane cultivars.

The Impact of Industrial Context on Procurement, Management and Development of Harvesting Services: A Comparison of Two Swedish Forest Owners Associations

Directory of Open Access Journals (Sweden)

Emanuel Erlandsson

2013-12-01

Full Text Available Increasing demands to harvesting production and quality require improved management practices. This study’s purpose was to analyze the impact of industrial context on procurement, management, and development of harvesting services. Using interviews, functions were modeled at two forest owners associations (FOAs with outsourced harvesting services. One FOA had its own sawmills, requiring frequent harvesting production adjustments to meet varying volume demand in the short-term. The long-term uncertainty was however low because of good visibility of future demand (>6 months. The other FOA did not own mills and produced wood according to fixed six-month delivery contracts. This meant few short-term production adjustments, but long-term uncertainty due to low visibility of future demand. Demand uncertainty resulted in corresponding needs for harvesting capacity flexibility. This could have been met by a corresponding proportion of short-term contracts for capacity. In this study, however, a large proportion (>90% of long-term contracts was found, motivated by a perceived contractor shortage. It was also noted that although contractor investment cycles (4–6 years matched the FOAs’ strategic horizons (3–5 years, contractors’ investment plans were not considered in the FOAs’ strategic planning. The study concludes with a characterization of different FOA contexts and their corresponding needs for capacity flexibility.

Multiple Input Energy Harvesting Systems for Autonomous IoT End-Nodes

Directory of Open Access Journals (Sweden)

Johan J. Estrada-López

2018-03-01

Full Text Available The Internet-of-Things (IoT paradigm is under constant development and is being enabled by the latest research work from both industrial and academic communities. Among the many contributions in such diverse areas as sensor manufacturing, network protocols, and wireless communications, energy harvesting techniques stand out as a key enabling technology for the realization of batteryless IoT end-node systems. In this paper, we give an overview of the recent developments in circuit design for ultra-low power management units (PMUs, focusing mainly in the architectures and techniques required for energy harvesting from multiple heterogeneous sources. The paper starts by discussing a general structure for IoT end-nodes and the main characteristics of PMUs for energy harvesting. Then, an overview is given of different published works for multisource power harvesting, observing their main advantages and disadvantages and comparing their performance. Finally, some open areas of research in multisource harvesting are observed and relevant conclusions are given.

Use of classifier to determine coffee harvest time by detachment force

Directory of Open Access Journals (Sweden)

Murilo M. de Barros

Full Text Available ABSTRACT Coffee quality is an essential aspect to increase its commercial value and for the Brazilian coffee business to remain prominent in the world market. Fruit maturity stage at harvest is an important factor that affects the quality and commercial value of the product. Therefore, the objective of this study was to develop a classifier using neural networks to distinguish green coffee fruits from mature coffee fruits, based on the detachment force. Fruit detachment force and the percentage value of the maturity stage were measured during a 75-day harvest window. Collections were carried out biweekly, resulting in five different moments within the harvest period. A classifier was developed using neural networks to distinguish green fruits from mature fruits in the harvest period analyzed. The results show that, in the first half of June, the supervised classified had the highest success percentage in differentiating green fruits from mature fruits, and this period was considered as ideal for a selective harvest under these experimental conditions.

Hybrid energy harvesting using active thermal backplane

Science.gov (United States)

Kim, Hyun-Wook; Lee, Dong-Gun

2016-04-01

In this study, we demonstrate the concept of a new hybrid energy harvesting system by combing solar cells with magneto-thermoelectric generator (MTG, i.e., thermal energy harvesting). The silicon solar cell can easily reach high temperature under normal operating conditions. Thus the heated solar cell becomes rapidly less efficient as the temperature of solar cell rises. To increase the efficiency of the solar cell, air or water-based cooling system is used. To surpass conventional cooling devices requiring additional power as well as large working space for air/water collectors, we develop a new technology of pairing an active thermal backplane (ATB) to solar cell. The ATB design is based on MTG technology utilizing the physics of the 2nd order phase transition of active ferromagnetic materials. The MTG is cost-effective conversion of thermal energy to electrical energy and is fundamentally different from Seebeck TEG devices. The ATB (MTG) is in addition to being an energy conversion system, a very good conveyor of heat through both conduction and convection. Therefore, the ATB can provide dual-mode for the proposed hybrid energy harvesting. One is active convective and conductive cooling for heated solar cell. Another is active thermal energy harvesting from heat of solar cell. These novel hybrid energy harvesting device have potentially simultaneous energy conversion capability of solar and thermal energy into electricity. The results presented can be used for better understanding of hybrid energy harvesting system that can be integrated into commercial applications.

Power Control Optimization of an Underwater Piezoelectric Energy Harvester

Directory of Open Access Journals (Sweden)

Iñigo Aramendia

2018-03-01

Full Text Available Over the past few years, it has been established that vibration energy harvesters with intentionally designed components can be used for frequency bandwidth enhancement under excitation for sufficiently high vibration amplitudes. Pipelines are often necessary means of transporting important resources such as water, gas, and oil. A self-powered wireless sensor network could be a sustainable alternative for in-pipe monitoring applications. A new control algorithm has been developed and implemented into an underwater energy harvester. Firstly, a computational study of a piezoelectric energy harvester for underwater applications has been studied for using the kinetic energy of water flow at four different Reynolds numbers Re = 3000, 6000, 9000, and 12,000. The device consists of a piezoelectric beam assembled to an oscillating cylinder inside the water of pipes from 2 to 5 inches in diameter. Therefore, unsteady simulations have been performed to study the dynamic forces under different water speeds. Secondly, a new control law strategy based on the computational results has been developed to extract as much energy as possible from the energy harvester. The results show that the harvester can efficiently extract the power from the kinetic energy of the fluid. The maximum power output is 996.25 µW and corresponds to the case with Re = 12,000.

Development of model for analysing respective collections of intended hematopoietic stem cells and harvests of unintended mature cells in apheresis for autologous hematopoietic stem cell collection.

Science.gov (United States)

Hequet, O; Le, Q H; Rodriguez, J; Dubost, P; Revesz, D; Clerc, A; Rigal, D; Salles, G; Coiffier, B

2014-04-01

Hematopoietic stem cells (HSCs) required to perform peripheral hematopoietic autologous stem cell transplantation (APBSCT) can be collected by processing several blood volumes (BVs) in leukapheresis sessions. However, this may cause granulocyte harvest in graft and decrease in patient's platelet blood level. Both consequences may induce disturbances in patient. One apheresis team's current purpose is to improve HSC collection by increasing HSC collection and prevent increase in granulocyte and platelet harvests. Before improving HSC collection it seemed important to know more about the way to harvest these types of cells. The purpose of our study was to develop a simple model for analysing respective collections of intended CD34+ cells among HSC (designated here as HSC) and harvests of unintended platelets or granulocytes among mature cells (designated here as mature cells) considering the number of BVs processed and factors likely to influence cell collection or harvest. For this, we processed 1, 2 and 3 BVs in 59 leukapheresis sessions and analysed corresponding collections and harvests with a referent device (COBE Spectra). First we analysed the amounts of HSC collected and mature cells harvested and second the evolution of the respective shares of HSC and mature cells collected or harvested throughout the BV processes. HSC collections and mature cell harvests increased globally (pcollections and harvests, which showed that only pre-leukapheresis blood levels (CD34+cells and platelets) influenced both cell collections and harvests (CD34+cells and platelets) (pcollections and mature unintended cells harvests (pcollections or unintended mature cell harvests were pre-leukapheresis blood cell levels. Our model was meant to assist apheresis teams in analysing shares of HSC collected and mature cells harvested with new devices or with new types of HSC mobilization. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of outcomes of permanently closed and periodically harvested coral reef reserves.

Science.gov (United States)

Bartlett, C Y; Manua, C; Cinner, J; Sutton, S; Jimmy, R; South, R; Nilsson, J; Raina, J

2009-12-01

In many areas of the developing world, the establishment of permanent marine reserves is inhibited by cultural norms or socioeconomic pressures. Community conserved areas that are periodically harvested are increasingly being implemented as fisheries management tools, but few researchers have empirically compared them with permanently closed reserves. We used a hierarchical control-impact experimental design to compare the abundance and biomass of reef fishes, invertebrates, and substrate composition in periodically harvested and permanent reserves and in openly fished (control sites) of the South Pacific island country of Vanuatu. Fished species had significantly higher biomass in periodically harvested reserves than in adjacent openly fished areas. We did not detect differences in substratum composition between permanent reserves and openly fished areas or between permanent reserves and periodically harvested reserves. Giant clams (tridacnids) and top shells (Trochus niloticus) were vulnerable to periodic harvest, and we suggest that for adequate management of these species, periodically harvested community conservation areas be used in conjunction with other management strategies. Periodic harvest within reserves is an example of adaptive and flexible management that may meet conservation goals and that is suited to the social, economic, and cultural contexts of many coastal communities in the developing world.

An evaluation of harvesting machinery for short rotation coppice willow in Denmark

Energy Technology Data Exchange (ETDEWEB)

Kofman, P.D.; Spinelli, R.

1997-12-31

During the harvesting seasons 1994-1995 and 1995-1996 several harvesting trials were carried out within the EU project on harvesting and storage of Short Rotation Crops and within a national project. During this period the following machines were investigated: Diemelstadt poplar harvester, cut and chip; Claas forage harvester with SRF header, cut and chip; Austoft sugarcane harvester, adapted to SRF, cut and chip; Bender II, cut and chip; Hvidsted Energy Allrounder, whole shoot harvester; Dansalix whole shoot harvester. In the 1994-1995 season the intention was to harvest 300 tonnes of whole shoots, chunks and chips for a storage trial. The main conclusions of the 1994-1995 harvesting season must be that harvesting willow with the existing machines in wet winters without frozen ground is very difficult. The machines will have to be developed further and special interest should be given to developing shuttle vehicles with the same flotation as the tracked harvester. Several of the problems encountered with the machines in Denmark were confirmed by the experience in the other trials. Road transportation of chips from SRF plantations is just as expensive as transporting energy chips from the forest at about Dkr 50 per tonne over 48 km. Transporting whole shoots is very expensive due to the low bulk density. Transportation of whole shoots over 48 km costs on the average Dkr 133 per tonne fresh. A very short pilot study into chipping of whole shoots from a three metre high pile indicated that this comminution with a normal forest chipper has a low productivity (8.9 tonnes fresh per work place hour) and is very expensive at Dkr 157 per tonne. This productivity can be improved by equipping the chipper with a special feeding table and better feed rollers for the SRF crop. (EG)

Soybean biodiesel consumption in agricultural tractor submitted the two forces in the traction bar; Consumo de biodiesel de soja em trator agricola submetido a duas forcas na barra de tracao

Energy Technology Data Exchange (ETDEWEB)

Camara, Felipe T. da [Universidade Federal do Ceara (UFC), Juazeiro do Norte, CE (Brazil)], E-mail: felipe.camara@cariri.ufc.br; Lopes, Afonso; Silva, Rouverson P. da; Oliveira, Melina C.J. de; Torres, Luma S. [Universidade Estadual Paulista (FCAV/UNESP), SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural

2009-07-01

Due to the great development occurred in the world after the Second World War and the establishment of patterns of increasingly intense, the energy demand amounted to the point, putting at risk the non-renewable energy sources such as oil, coal minerals, among others, with growing interest in renewable energies, among which the biodiesel has been detached. In this sense, the present work had for objective to evaluate the fuel consumption of a tractor Valtra BM100 4x2 TDA, running with ethyl biodiesel from soybean filtered in seven mixture proportions mixed with the diesel, subject to two forces in the traction bar. The work was conducted in the Department of Rural Engineering of the Paulista State University (UNESP), Jaboticabal Campus, in an entirely randomized designed, in a factorial diagram 2 x 7, with three repetitions. The treatments were a combination for two forces in the traction bar (10 and 22 kN) and seven mixture proportions (B{sub 0}, B{sub 5}, B{sub 1}5, B{sub 2}5, B{sub 5}0, B{sub 7}5 e B{sub 1}00). The results showed that the addition of up to 25% biodiesel to diesel has not changed the fuel consumption, and the greatest force resulted in greater consumption volume and weight, and lower specific consumption, by better use of the power of the tractor. (author)

Population Modeling Approach to Optimize Crop Harvest Strategy. The Case of Field Tomato.

Science.gov (United States)

Tran, Dinh T; Hertog, Maarten L A T M; Tran, Thi L H; Quyen, Nguyen T; Van de Poel, Bram; Mata, Clara I; Nicolaï, Bart M

2017-01-01

In this study, the aim is to develop a population model based approach to optimize fruit harvesting strategies with regard to fruit quality and its derived economic value. This approach was applied to the case of tomato fruit harvesting under Vietnamese conditions. Fruit growth and development of tomato (cv. "Savior") was monitored in terms of fruit size and color during both the Vietnamese winter and summer growing seasons. A kinetic tomato fruit growth model was applied to quantify biological fruit-to-fruit variation in terms of their physiological maturation. This model was successfully calibrated. Finally, the model was extended to translate the fruit-to-fruit variation at harvest into the economic value of the harvested crop. It can be concluded that a model based approach to the optimization of harvest date and harvest frequency with regard to economic value of the crop as such is feasible. This approach allows growers to optimize their harvesting strategy by harvesting the crop at more uniform maturity stages meeting the stringent retail demands for homogeneous high quality product. The total farm profit would still depend on the impact a change in harvesting strategy might have on related expenditures. This model based harvest optimisation approach can be easily transferred to other fruit and vegetable crops improving homogeneity of the postharvest product streams.

On the Modeling of a MEMS Based Capacitive Accelerometer for Measurement of Tractor Seat Vibration

Directory of Open Access Journals (Sweden)

M. Alidoost

2010-04-01

Full Text Available Drivers of heavy vehicles often face with higher amplitudes of frequencies range between 1-80 Hz. Hence, this range of frequency results in temporary or even sometimes permanent damages to the health of drivers. Examples for these problems are damages to the vertebral column and early tiredness, which both reduce the driver’s performance significantly. One solution to this problem is to decrease the imposed vibration to the driver’s seat by developing an active seat system. These systems require an online measuring unit to sense vibrations transferred to the seat. The measuring unit can include a capacitive micro-accelerometer on the basis of MEMS which measure online vibrations on the seat. In this study, the mechanical behavior of a capacitive micro-accelerometer for the vibration range applied to a tractor seat has been simulated. The accelerometer is capable to measure step, impact and harmonic external excitations applied to the system. The results of the study indicate that, with increasing the applied voltage, the system sensitivity also increases, but the measuring range of vibrations decreases and vice versa. The modeled accelerometer, at damping ratio of 0.67 is capable to measure accelerations within the frequency range of lower than 130 Hz.

Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic

Directory of Open Access Journals (Sweden)

Muhammad Yazid Muhammad Ammar Faris

2017-01-01

Full Text Available Harvesting energy from ambient vibrations is a highly required method because of the wide range of available sources that produce vibration energy application from industrial machinery to human motion application. In this paper, the implementation of harvesting energy from two technologies to form a hybrid energy harvester system was analyzed. These two technologies involve the piezoelectric harvesting energy and the electromagnetic harvesting energy. A finite element model was developed using the Ansys software with the harmonic analysis solver to analyze and examine hybrid harvesting energy system. Both power output generated from the magnet and the piezoelectric is then combined to form one unit of energy. Further, it was found that the result shows the system generate the maximum power output of 14.85 μW from 100 Hz, 4.905 m/s2, and 0.6 cm3 for resonance frequency, acceleration, and the volume respectively from the optimal energy harvester design. Normalized Power Density (NPD result of 10.29 kgs/m3 comparable with other literature also can be used in energy harvesting system for vibration application.

Antropometria aplicada aos operadores de tratores agrícolas Anthropometrics applied to the agricultural tractors operators

Directory of Open Access Journals (Sweden)

José Fernando Schlosser

2002-12-01

Full Text Available O objetivo deste trabalho foi determinar o padrão antropométrico dos operadores de tratores agrícolas da Depressão Central do Rio Grande do Sul. Os operadores de tratores agrícolas foram medidos por meio de um painel constituído por duas chapas metálicas, permanecendo durante as medições em pé, eretos, com o mínimo de roupa possível e em contato com o painel. As variáveis medidas foram as seguintes: altura do corpo; altura ao nível dos olhos; altura ao nível dos olhos sentado; altura do cotovelo; alcance do braço; alcance da mão; distância pé-patela; apoio do assento. Os dados obtidos demonstram que há diferenças entre o biótipo do operador utilizado pela indústria de tratores agrícolas e o do operador da região, de forma que este último apresentou, para todas as medidas, à exceção do apoio do assento, uma média maior. Observa-se também que, para cada medida, os limites inferior e superior do intervalo onde se encontram 90% dos operadores avaliados foram, respectivamente, menores e maiores que o padrão utilizado pela indústria, caracterizando uma maior variação. Levando-se em consideração as diferenças existentes entre o perfil antropométrico dos operadores de tratores agrícolas da Depressão Central do Rio Grande do Sul e os parâmetros utilizados pela indústria, pode-se confirmar a hipótese de que os tratores agrícolas que se encontram atualmente em comercialização no Brasil podem não oferecer o conforto necessário ao operador desta região .The objective of this work was to evaluate the anthropometric measures of the agricultural tractor operators of the Central Region of Rio Grande do Sul State. The agricultural tractor operators were measured through a panel that was made of two metallic plates. During the measurement, they were standing, wearing the minimum amount clothes possible, and touching the panel. The measures body height, eyes level height (standing, eyes level height (sitting, elbow

Wireless Underwater Monitoring Systems Based on Energy Harvestings

Directory of Open Access Journals (Sweden)

Sea-Hee HWANGBO

2013-01-01

Full Text Available One of the important research fields for aquatic exploitation and conservation is underwater wireless sensor network. Since limited energy source for underwater nodes and devices is a main open problem, in this paper, we propose wireless underwater monitoring systems powered by energy harvester which resolves the energy constraint. The target system generates renewable energy from energy harvester and shares the energy with underwater sensor nodes. For the realization of the system, key components to be investigated are discriminated as follows: acoustic modem, actuator, smart battery charge controller, energy harvester and wireless power transfer module. By developing acoustic modem, actuator and smart battery charge controller and utilizing off-the-shelf energy harvester and wireless power transfer module, we design and implement a prototype of the system. Also, we verify the feasibility of concept of target system by conducting indoor and outdoor experiments.

Energy harvesting with functional materials and microsystems

CERN Document Server

Bhaskaran, Madhu; Iniewski, Krzysztof

2013-01-01

For decades, people have searched for ways to harvest energy from natural sources. Lately, a desire to address the issue of global warming and climate change has popularized solar or photovoltaic technology, while piezoelectric technology is being developed to power handheld devices without batteries, and thermoelectric technology is being explored to convert wasted heat, such as in automobile engine combustion, into electricity. Featuring contributions from international researchers in both academics and industry, Energy Harvesting with Functional Materials and Microsystems explains the growi

Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

International Nuclear Information System (INIS)

Walsh, D.; Strandgard, M.

2014-01-01

Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

Energy Harvesting Research: The Road from Single Source to Multisource.

Science.gov (United States)

Bai, Yang; Jantunen, Heli; Juuti, Jari

2018-06-07

Energy harvesting technology may be considered an ultimate solution to replace batteries and provide a long-term power supply for wireless sensor networks. Looking back into its research history, individual energy harvesters for the conversion of single energy sources into electricity are developed first, followed by hybrid counterparts designed for use with multiple energy sources. Very recently, the concept of a truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains in detail a wide scope to give an overview of energy harvesting research. It covers single-source devices including solar, thermal, kinetic and other types of energy harvesters, hybrid energy harvesting configurations for both single and multiple energy sources and single material, and multisource energy harvesters. It also includes the energy conversion principles of photovoltaic, electromagnetic, piezoelectric, triboelectric, electrostatic, electrostrictive, thermoelectric, pyroelectric, magnetostrictive, and dielectric devices. This is one of the most comprehensive reviews conducted to date, focusing on the entire energy harvesting research scene and providing a guide to seeking deeper and more specific research references and resources from every corner of the scientific community. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design optimization of harvester head and actuation system of forest harvester

DEFF Research Database (Denmark)

Andersen, Torben Ole; Hansen, Michael R.; Mouritsen, Ole Ø.

2005-01-01

This paper is on the analysis and subsequent efficiency optimization of a forrest harvester. As basis for the optimization the existing machine has undergone substantial experimental testing with a view to determine the loading that the harvester head is subjected to and also the corresponding...

Harvest of table olives by mechanical harvesting equipment

Directory of Open Access Journals (Sweden)

Filippo Gambella

2013-09-01

Full Text Available In this work, we have evaluated the performance, of an electric comb equipped with five undulated fingers used for mechanized the harvesting of table olives. The first aim of the work was to test three different types of coating materials used for covering the fingers: Silicon (S, Vulcanized rubber (VR and Natural rubber (NR. The diameter of the coating materials tested were 7mm (D1, 14 mm (D2, 19 mm (D3 in order to evaluate the damage of different working conditions on the intact olives. During harvesting, silicon at 7mm and 14mm resulted in the largest percentage of undamaged the fruit (67% and 65%, natural rubber 63% and vulcanized rubber at the 54%. The second aim was to evaluate the combination, in terms of the best performance, of the machines used for mechanized harvesting of table olives. Several factors have been examined: undulating fingers variation thickness, different rotational speeds and different coating materials used to reduce the impact damage on olives. From the tests on olive tree we have determined that while plastic materials (S and (NR appear to have a positive role in harvest quality, the vibration transmitted to the operator’s hand is great from 6.48 m/s2 for S to 6.31 m/ s2 for NR and 2.92 m/s2 for VR, respect to the materials used.

FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. Third year report. Development of precision farming system combined with the autonomous vehicle for large scale agriculture; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy bun'ya. Daikibo nogyo muke seimitsu jiritsu soko sagyo shien system no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A farming supporting system that enables autonomous driving was developed from a viewpoint that the development of super manpower saving technology including automation helps sustainable development of the Japanese agriculture. The following were conducted: development of autonomous driving vehicle, development of automated operation unit, field space mapping for precision agriculture and development of groups of PF (precision farming) work machine (weeder, controller, fertilizer applicator, harvesting machine), development of groups of field work sensor (simple soil analytical system, crop growing sensor, glass yield sensor), development of field information managing database, development of work optimized application software. The operation test on the integration system was made at the model production field. The operation experiment using fertilizer applicator, controller and autonomous driving tractor was carried out at a beet field of 2ha in the farming zone in Tokachi, Hokkaido, and the results were obtained as expected. Further, as to the precision agriculture introduced with developmental equipment, etc., 20% of the energy consumption is expected to be reduced. (NEDO)

FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy field. Third year report. Development of precision farming system combined with the autonomous vehicle for large scale agriculture; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy bun'ya. Daikibo nogyo muke seimitsu jiritsu soko sagyo shien system no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A farming supporting system that enables autonomous driving was developed from a viewpoint that the development of super manpower saving technology including automation helps sustainable development of the Japanese agriculture. The following were conducted: development of autonomous driving vehicle, development of automated operation unit, field space mapping for precision agriculture and development of groups of PF (precision farming) work machine (weeder, controller, fertilizer applicator, harvesting machine), development of groups of field work sensor (simple soil analytical system, crop growing sensor, glass yield sensor), development of field information managing database, development of work optimized application software. The operation test on the integration system was made at the model production field. The operation experiment using fertilizer applicator, controller and autonomous driving tractor was carried out at a beet field of 2ha in the farming zone in Tokachi, Hokkaido, and the results were obtained as expected. Further, as to the precision agriculture introduced with developmental equipment, etc., 20% of the energy consumption is expected to be reduced. (NEDO)

Features of harvesting machinery operation on weak soils in the Far East Region

Directory of Open Access Journals (Sweden)

A. N. Panasyuk

2017-01-01

Full Text Available The authors based on own researches established actual problems of harvesting in the Amur region: ensuring passability of machines on the waterlogged soil, need of machines adaptivising to technologies of soybean harvesting, transfer of a part of the combine fleet to a caterpillar track, implementation of reloading reducing impact on the soil technologies of harvesting, increase in cost efficiency of mashines use and postharvest drying of grain and corn.Perspective solutions of problems are shown: design development of caterpillar end trucks of combines with the rubber-reinforced tracks (RRT; engineering and production of the soybean-grain harvester with RRT or a set of devices for the grain harvester with RRT as the option transferring it to the category the soybean-grain ones; process development to provide harvesting of soybean heap by the machine with RRT which crush and spread straw across the field simultaneous, to deliver soybean heap to stationary point of postharvest handling for the subsequent separation into seeds, marketable soybean and a soy chaff as valuable protein feed for livestock production, ready for feeding and storage; engineering of the forage harvester with RRT on a block and modular basis, that is based on the multipurpose power mean on RRT with the 4-machine scheme of a hydrostatic power drive of a undercarriager; development of a design of caterpillar blocks with triangular shape of contour; implementation of reloading technologies of harvest operations on system VIMLIFT.Production of harvest transport vehicles should be performed on a block and modular basis - in the form of a complex of self-propelled agricultural machines based on the released multipurpose power module with a set of the replaceable technological adapters providing its loading within a year. The agroterm of corn on grain harvesting should be delayed to later time when grain reaches standard humidity naturally.

Radio Frequency Energy Harvesting Sources

Directory of Open Access Journals (Sweden)

Action NECHIBVUTE

2017-12-01

Full Text Available This radio frequency (RF energy harvesting is an emerging technology and research area that promises to produce energy to run low-power wireless devices. The great interest that has recently been paid to RF harvesting is predominantly driven by the great progress in both wireless communication systems and broadcasting technologies that have availed a lot of freely propagating ambient RF energy. The principle aim of an RF energy harvesting system is to convert the received ambient RF energy into usable DC power. This paper presents a state of the art concise review of RF energy harvesting sources for low power applications, and also discusses open research questions and future research directions on ambient RF energy harvesting.

Finite element modeling of electrically rectified piezoelectric energy harvesters

International Nuclear Information System (INIS)

Wu, P H; Shu, Y C

2015-01-01

Finite element models are developed for designing electrically rectified piezoelectric energy harvesters. They account for the consideration of common interface circuits such as the standard and parallel-/series-SSHI (synchronized switch harvesting on inductor) circuits, as well as complicated structural configurations such as arrays of piezoelectric oscillators. The idea is to replace the energy harvesting circuit by the proposed equivalent load impedance together with the capacitance of negative value. As a result, the proposed framework is capable of being implemented into conventional finite element solvers for direct system-level design without resorting to circuit simulators. The validation based on COMSOL simulations carried out for various interface circuits by the comparison with the standard modal analysis model. The framework is then applied to the investigation on how harvested power is reduced due to fabrication deviations in geometric and material properties of oscillators in an array system. Remarkably, it is found that for a standard array system with strong electromechanical coupling, the drop in peak power turns out to be insignificant if the optimal load is carefully chosen. The second application is to design broadband energy harvesting by developing array systems with suitable interface circuits. The result shows that significant broadband is observed for the parallel (series) connection of oscillators endowed with the parallel-SSHI (series-SSHI) circuit technique. (paper)

Finite element modeling of electrically rectified piezoelectric energy harvesters

Science.gov (United States)

Wu, P. H.; Shu, Y. C.

2015-09-01

Finite element models are developed for designing electrically rectified piezoelectric energy harvesters. They account for the consideration of common interface circuits such as the standard and parallel-/series-SSHI (synchronized switch harvesting on inductor) circuits, as well as complicated structural configurations such as arrays of piezoelectric oscillators. The idea is to replace the energy harvesting circuit by the proposed equivalent load impedance together with the capacitance of negative value. As a result, the proposed framework is capable of being implemented into conventional finite element solvers for direct system-level design without resorting to circuit simulators. The validation based on COMSOL simulations carried out for various interface circuits by the comparison with the standard modal analysis model. The framework is then applied to the investigation on how harvested power is reduced due to fabrication deviations in geometric and material properties of oscillators in an array system. Remarkably, it is found that for a standard array system with strong electromechanical coupling, the drop in peak power turns out to be insignificant if the optimal load is carefully chosen. The second application is to design broadband energy harvesting by developing array systems with suitable interface circuits. The result shows that significant broadband is observed for the parallel (series) connection of oscillators endowed with the parallel-SSHI (series-SSHI) circuit technique.

Innovative thermal energy harvesting for future autonomous applications

Science.gov (United States)

Monfray, Stephane

2013-12-01

As communicating autonomous systems market is booming, the role of energy harvesting will be a key enabler. As example, heat is one of the most abundant energy sources that can be converted into electricity in order to power circuits. Harvesting systems that use wasted heat open new ways to power autonomous sensors when the energy consumption is low, or to create systems of power generators when the conversion efficiency is high. The combination of different technologies (low power μ-processors, μ-batteries, radio, sensors...) with new energy harvesters compatible with large varieties of use-cases with allow to address this booming market. Thanks to the conjunction of ultra-low power electronic development, 3D technologies & Systems in Package approaches, the integration of autonomous sensors and electronics with ambient energy harvesting will be achievable. The applications are very wide, from environment and industrial sensors to medical portable applications, and the Internet of things may also represent in the future a several billions units market.

Innovative thermal energy harvesting for future autonomous applications

International Nuclear Information System (INIS)

Monfray, Stephane

2013-01-01

As communicating autonomous systems market is booming, the role of energy harvesting will be a key enabler. As example, heat is one of the most abundant energy sources that can be converted into electricity in order to power circuits. Harvesting systems that use wasted heat open new ways to power autonomous sensors when the energy consumption is low, or to create systems of power generators when the conversion efficiency is high. The combination of different technologies (low power μ-processors, μ-batteries, radio, sensors...) with new energy harvesters compatible with large varieties of use-cases with allow to address this booming market. Thanks to the conjunction of ultra-low power electronic development, 3D technologies and Systems in Package approaches, the integration of autonomous sensors and electronics with ambient energy harvesting will be achievable. The applications are very wide, from environment and industrial sensors to medical portable applications, and the Internet of things may also represent in the future a several billions units market

Metallic particles into mechanical and hydraulic systems in agricultural and construction machines

Energy Technology Data Exchange (ETDEWEB)

Silva, Jair Rosas da; Silva, Deise Paula da [Instituto Agronomico de Campinas (IAC), Campinas, SP (Brazil). Centro de Engenharia Agricola; Bormio, Marcos Roberto [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia

2008-07-01

The lubricant oil analysis are an indicator of the conditions how the lubricant is, may to allow the prevision of damages that occurred into machine due to the internal abrasion of hydraulic and mechanical components of the machines. The present study had the objective to determine the kind and quantity of the metallic particles that occurred into the lubricant oil of the mechanical and hydraulic compartments of the energy transmission systems of three kinds of machines: a tracked-tractor, a sugarcane harvester and a group of power-shovels. The metallic particles presents into these compartments were determined under laboratory tests and concerning to the following elements: iron, copper, chromium, lead, nickel, aluminum, silex, tin and molybdenum. About to the tracked-tractor, the metallic contaminators into to the oil charges surpasses the tolerate levels, considering the technical standards adopted in this evaluation. In the sugarcane harvester only a metallic element in excess was identified and, in a power-shovel group it was showed the need to correct air false entrances in the hydraulic or mechanical systems due the high presence of silex element. (author)

Development of a new bin filler for apple harvesting and infield sorting with a review of existing technologies

Science.gov (United States)

The bin filler, which receives apples from the sorting system and then places them in the bin evenly without causing bruise damage, plays a critical role for the self-propelled apple harvest and infield sorting (HIS) machine that is being developed in our laboratory. Two major technical challenges ...

High relative humidity pre-harvest reduces post-harvest proliferation of Salmonella in tomatoes.

Science.gov (United States)

Devleesschauwer, Brecht; Marvasi, Massimiliano; Giurcanu, Mihai C; Hochmuth, George J; Speybroeck, Niko; Havelaar, Arie H; Teplitski, Max

2017-09-01

Outbreaks of human illness caused by enteric pathogens such as Salmonella are increasingly linked to the consumption of fruits and vegetables. Knowledge on the factors affecting Salmonella proliferation on fresh produce therefore becomes increasingly important to safeguard public health. Previous experiments showed a limited impact of pre-harvest production practices on Salmonella proliferation on tomatoes, but suggested a significant effect of harvest time. We explored the data from two previously published and one unpublished experiment using regression trees, which allowed overcoming the interpretational difficulties of classical statistical models with higher order interactions. We assessed the effect of harvest time by explicitly modeling the climatic conditions at harvest time and by performing confirmatory laboratory experiments. Across all datasets, regression trees confirmed the dominant effect of harvest time on Salmonella proliferation, with humidity-related factors emerging as the most important underlying climatic factors. High relative humidity the week prior to harvest was consistently associated with lower Salmonella proliferation. A controlled lab experiment confirmed that tomatoes containing their native epimicrobiota supported significantly lower Salmonella proliferation when incubated at higher humidity prior to inoculation. The complex interactions between environmental conditions and the native microbiota of the tomato crop remain to be fully understood. Copyright © 2017 Elsevier Ltd. All rights reserved.

Machinery management data for willow harvest with a bio-baler

Energy Technology Data Exchange (ETDEWEB)

Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada); Hebert, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Robert, F.S. [Laval Univ., Quebec City, PQ (Canada). Sols et environnement

2010-07-01

Willow harvested in 2-to-3-year rotations has been touted as a reliable source of biomass. A newly designed harvester based on a round baler was developed in 2006. The third generation biobaler was evaluated in 2009 at 2 willow plantations in Quebec. The first site at Godmanchester was a three-year old regrowth with an estimated 52,000 stems/ha of large diameter willow. The biobaler with a flail cutter harvested three plots totalling 4,136 m{sup 2}. Total harvested biomass was 10.36 t DM in 42 bales. The harvest rate averaged 29 bale/h with an average bale size of 1.22 m wide by 1.30 m in diameter. Diesel fuel consumption averaged 0.81 L/bale. Measured losses averaged 11 per cent of the yield. The second site at Saint-Roch-del'Achigan was a two-year old growth with an estimated 49,000 stems/ha of large stem willow. The biobaler harvested seven plots totalling 15,740 m{sup 2}. Total harvest was 30.70 t DM in 148 bales. The first 14 bales were harvested with a saw blade header. All other bales were harvested with the flail cutter at a faster rate. Bale density averaged 129 kg DM/m{sup 3}. Fuel consumption averaged 0.72 L/bale. Losses averaged 20 per cent of the yield with the saw blade header.

Reduced-order modeling of piezoelectric energy harvesters with nonlinear circuits under complex conditions

Science.gov (United States)

Xiang, Hong-Jun; Zhang, Zhi-Wei; Shi, Zhi-Fei; Li, Hong

2018-04-01

A fully coupled modeling approach is developed for piezoelectric energy harvesters in this work based on the use of available robust finite element packages and efficient reducing order modeling techniques. At first, the harvester is modeled using finite element packages. The dynamic equilibrium equations of harvesters are rebuilt by extracting system matrices from the finite element model using built-in commands without any additional tools. A Krylov subspace-based scheme is then applied to obtain a reduced-order model for improving simulation efficiency but preserving the key features of harvesters. Co-simulation of the reduced-order model with nonlinear energy harvesting circuits is achieved in a system level. Several examples in both cases of harmonic response and transient response analysis are conducted to validate the present approach. The proposed approach allows to improve the simulation efficiency by several orders of magnitude. Moreover, the parameters used in the equivalent circuit model can be conveniently obtained by the proposed eigenvector-based model order reduction technique. More importantly, this work establishes a methodology for modeling of piezoelectric energy harvesters with any complicated mechanical geometries and nonlinear circuits. The input load may be more complex also. The method can be employed by harvester designers to optimal mechanical structures or by circuit designers to develop novel energy harvesting circuits.

Tractor perfomance as a function of speed and seeder’s tire inflation pressure Desempenho de trator em função da velocidade e da pressão de inflação dos pneus da semeadora

Directory of Open Access Journals (Sweden)

Carlos Eduardo Angeli Furlani

2010-08-01

Full Text Available The performance of agricultural tractors under field conditions results from the interaction between tire and wheel affected by displacement speed. This work was developed to assess the performance of an agricultural tractor under different seeder's tire inflation pressure (518; 483 and 414kPa and in two different gears providing speeds of 3.0 and 6.0km h-1. The experiment was performed at Jaboticabal Campus of São Paulo State University (UNESP. The experimental design used was entirely randomized in a 2-factor factorial design (3x2 with four replications. The draft force was influenced by the gear as well as by the required power; however, tire inflation pressure in the seeder did not change these parameters. Also, fuel consumption was influenced only by the tractor gear. Energy consumption was greater as speed increased, caused by gear shifting. The displacement speed was greater for the 518kPa pressure due to a lesser slippage in the seeder under this pressure. Tractor slippage did not change.O desempenho de tratores agrícolas em condições de campo resulta da interação entre pneu e rodado, influenciado pela velocidade de deslocamento. O objetivo deste trabalho foi avaliar o desempenho de um trator agrícola sob diferentes pressões de inflação dos pneus da semeadora (518, 483, and 414kPa e em duas marchas que proporcionaram velocidades de 3,0 e 6,0km h-1. O experimento foi realizado no campus de Jaboticabal da Universidade Estadual Paulista (UNESP. O delineamento experimental utilizado foi fatorial inteiramente casualizado (3x2, com quatro repetições. A força de tração foi influenciada pela marcha e pela potência exigida; no entanto, a pressão de inflação do pneu da semeadora não alterou esses parâmetros. Além disso, o consumo de combustível foi influenciado apenas pela marcha do trator. O consumo de energia foi maior com o aumento da velocidade, ocasionada pela mudança de marcha. A velocidade de deslocamento foi maior

Impulse-Excited Energy Harvester based on Potassium-Ion- Electret

Science.gov (United States)

Ashizawa, H.; Mitsuya, H.; Ishibashi, K.; Ishikawa, T.; Fujita, H.; Hashiguchi, G.; Toshiyoshi, H.

2015-12-01

We have developed an energy harvester that is specifically desired for impulse acceleration of infrastructure vibrations such as sudden motion at railway bridges. The energy harvester based on potassium-ion-electret on the sidewalls of 1.8- μm-gap comb electrodes generated a 64 μAp-p current during low impulse acceleration, which was large enough to light a green LED.

Modelling piezoelectric energy harvesting potential in an educational building

International Nuclear Information System (INIS)

Li, Xiaofeng; Strezov, Vladimir

2014-01-01

Highlights: • Energy harvesting potential of commercialized piezoelectric tiles is analyzed. • The parameters which will affect the energy harvesting efficiency are determined. • The potential could cover 0.5% of the total energy usage of the library building. • A simplified evaluation indicator is proposed to test the considered paving area. - Abstract: In this paper, potential application of a commercial piezoelectric energy harvester in a central hub building at Macquarie University in Sydney, Australia is examined and discussed. Optimization of the piezoelectric tile deployment is presented according to the frequency of pedestrian mobility and a model is developed where 3.1% of the total floor area with the highest pedestrian mobility is paved with piezoelectric tiles. The modelling results indicate that the total annual energy harvesting potential for the proposed optimized tile pavement model is estimated at 1.1 MW h/year. This potential energy generation may be further increased to 9.9 MW h/year with a possible improvement in piezoelectric energy conversion efficiency integrated into the system. This energy harvesting potential would be sufficient to meet close to 0.5% of the annual energy needs of the building. The study confirms that locating high traffic areas is critical for optimization of the energy harvesting efficiency, as well as the orientation of the tile pavement significantly affects the total amount of the harvested energy. A Density Flow evaluation is recommended in this study to qualitatively evaluate the piezoelectric power harvesting potential of the considered area based on the number of pedestrian crossings per unit time

Prioridades de requisitos para projeto de postos de operação de tratores quanto à ergonomia e segurança Requirement priorities for the design of tractor workplaces related to ergonomics and safety

Directory of Open Access Journals (Sweden)

Paula Machado dos Santos

2008-07-01

which are assisted by the manufacturers of agricultural tractors, the tools for the development of design Mudge diagram and the first head office of Quality Function Deployment where used. The marks of national agricultural tractors present the same priority related to requirements for ergonomics and safety designs in of workplace operation. The seat represent a larger order priority, followed by commands and, in the last position, the accesses.

Integrated energy wood and pulpwood harvesting in first-thinning stands

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Pajuoja, H. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: heikki.pajuoja@metsateho.fi; Hoegnaes, T. (Metsaehallitus, Kajaani (Finland)), Email: tore.hognas@metsa.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), Email: arto.mutikainen@tts.fi

2009-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased strongly in young forests in Finland during the last two years. The studies carried out by Metsaeteho Oy, Metsaehallitus and TTS Research (I) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (II) clarified the development of the total removal in integrated harvesting operation, and (III) investigated the quality of pulpwood poles when using integrated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increases significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerably, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a grapple scale attached to the boom of the forwarder. As the studies indicated very promising experiences in integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinning in Finland. (orig.)

A vibration energy harvesting device with bidirectional resonance frequency tunability

International Nuclear Information System (INIS)

Challa, Vinod R; Prasad, M G; Shi Yong; Fisher, Frank T

2008-01-01

Vibration energy harvesting is an attractive technique for potential powering of wireless sensors and low power devices. While the technique can be employed to harvest energy from vibrations and vibrating structures, a general requirement independent of the energy transfer mechanism is that the vibration energy harvesting device operate in resonance at the excitation frequency. Most energy harvesting devices developed to date are single resonance frequency based, and while recent efforts have been made to broaden the frequency range of energy harvesting devices, what is lacking is a robust tunable energy harvesting technique. In this paper, the design and testing of a resonance frequency tunable energy harvesting device using a magnetic force technique is presented. This technique enabled resonance tuning to ± 20% of the untuned resonant frequency. In particular, this magnetic-based approach enables either an increase or decrease in the tuned resonant frequency. A piezoelectric cantilever beam with a natural frequency of 26 Hz is used as the energy harvesting cantilever, which is successfully tuned over a frequency range of 22–32 Hz to enable a continuous power output 240–280 µW over the entire frequency range tested. A theoretical model using variable damping is presented, whose results agree closely with the experimental results. The magnetic force applied for resonance frequency tuning and its effect on damping and load resistance have been experimentally determined

Modelling of a bridge-shaped nonlinear piezoelectric energy harvester

International Nuclear Information System (INIS)

Gafforelli, G; Corigliano, A; Xu, R; Kim, S G

2013-01-01

Piezoelectric MicroElectroMechanical Systems (MEMS) energy harvesting is an attractive technology for harvesting small magnitudes of energy from ambient vibrations. Increasing the operating frequency bandwidth of such devices is one of the major issues for real world applications. A MEMS-scale doubly clamped nonlinear beam resonator is designed and developed to demonstrate very wide bandwidth and high power density. In this paper a first complete theoretical discussion of nonlinear resonating piezoelectric energy harvesting is provided. The sectional behaviour of the beam is studied through the Classical Lamination Theory (CLT) specifically modified to introduce the piezoelectric coupling and nonlinear Green-Lagrange strain tensor. A lumped parameter model is built through Rayleigh-Ritz Method and the resulting nonlinear coupled equations are solved in the frequency domain through the Harmonic Balance Method (HBM). Finally, the influence of external load resistance on the dynamic behaviour is studied. The theoretical model shows that nonlinear resonant harvesters have much wider power bandwidth than that of linear resonators but their maximum power is still bounded by the mechanical damping as is the case for linear resonating harvesters

Energy harvesting: small scale energy production from ambient sources

Science.gov (United States)

Yeatman, Eric M.

2009-03-01

Energy harvesting - the collection of otherwise unexploited energy in the local environment - is attracting increasing attention for the powering of electronic devices. While the power levels that can be reached are typically modest (microwatts to milliwatts), the key motivation is to avoid the need for battery replacement or recharging in portable or inaccessible devices. Wireless sensor networks are a particularly important application: the availability of essentially maintenance free sensor nodes, as enabled by energy harvesting, will greatly increase the feasibility of large scale networks, in the paradigm often known as pervasive sensing. Such pervasive sensing networks, used to monitor buildings, structures, outdoor environments or the human body, offer significant benefits for large scale energy efficiency, health and safety, and many other areas. Sources of energy for harvesting include light, temperature differences, and ambient motion, and a wide range of miniature energy harvesters based on these sources have been proposed or demonstrated. This paper reviews the principles and practice in miniature energy harvesters, and discusses trends, suitable applications, and possible future developments.

Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester

Science.gov (United States)

Nammari, Abdullah; Caskey, Logan; Negrete, Johnny; Bardaweel, Hamzeh

2018-03-01

This article presents a non-resonant magneto-mechanical vibration energy harvester. When externally excited, the energy harvester converts vibrations into electric charge using a guided levitated magnet oscillating inside a multi-turn coil that is fixed around the exterior of the energy harvester. The levitated magnet is guided using four oblique mechanical springs. A prototype of the energy harvester is fabricated using additive manufacturing. Both experiment and model are used to characterize the static and dynamic behavior of the energy harvester. Measured restoring forces show that the fabricated energy harvester retains a mono-stable potential energy well with desired stiffness nonlinearities. Results show that magnetic spring results in hardening effect which increases the resonant frequency of the energy harvester. Additionally, oblique mechanical springs introduce geometric, negative, nonlinear stiffness which improves the harvester's response towards lower frequency spectrum. The unique design can produce a tunable energy harvester with multi-well potential energy characteristics. A finite element model is developed to estimate the average radial flux density experienced by the multi-turn coil. Also, a lumped parameter model of the energy harvester is developed and validated against measured data. Both upward and downward frequency sweeps are performed to determine the frequency response of the harvester. Results show that at higher excitation levels hardening effects become more apparent, and the system dynamic response turns into non-resonant. Frequency response curves exhibit frequency jump phenomena as a result of coexistence of multiple energy states at the frequency branch. The fabricated energy harvester is hand-held and measures approximately 100.5 [cm3] total volume. For a base excitation of 1.0 g [m/s2], the prototype generates a peak voltage and normalized power density of approximately 3.5 [V] and 0.133 [mW/cm3 g2], respectively, at 15.5 [Hz].

Development of a technique of the rapid analysis for forecasting of possible radionuclides accumulation in the harvest of agricultural crops

International Nuclear Information System (INIS)

Yadgarov, Kh.T.; Pugachev, V.V.; Kim, A.A.

2005-01-01

One of the main ways of pollution of plants by radionuclides is the receipt of radionuclides in plants from ground through root system and direct uptake of radionuclides by underground parts of plants. Therefore receipt of radioisotopes in rhizosphere of plants plays the main role in radionuclides accumulation in the plants. For plants cultivation in conditions of radioactive pollution of region it is necessary to estimate the value of possible radionuclides accumulation in a harvest of plants. Such forecasts are necessary at planning of growing of agricultural crops for the food, forage or technical purposes depending on a degree of their pollution by radionuclides. We investigated correlation between the content of strontium - 90 in plants in early phases of their development (20 days time) and in a harvest of plants at a soil way of radionuclide receipt. Our results of study of dependence of strontium - 90 accumulation in a harvest from its content in 20 days time sprouts show, that with reduction of the content of strontium - 90 in 20 days time sprouts, its quantity in a harvest of agriculture cultures is reduced. The correlation analysis of the received data has confirmed positive connection between accumulation of radionuclide in young and adult plants. So, correlation coefficients for a cotton, wheat and barley are 0,89; 0,91 and 0,91 correspondingly. Thus, the direct connection between the contents of strontium - 90 in plants of young age and its accumulation in a harvest of adult plants is established. It enables to predict pollution of' harvest by strontium - 90 under its contents in young plants. Using the received data, with the help of the least- squares method, we have calculated coefficients of the regression equation of a kind: y = a + bx, Where: y - the predicted contents of radionuclide in the harvest; x - the content of radionuclide in 20 days time sprouts; a, b - the empirical coefficients. Rather good coincidence of theoretical calculations and

Logging damage using an individual tree selection practice in Appalachian hardwood stands

Science.gov (United States)

Neil I. Lamson; H. Clay Smith; Gary W. Miller

1985-01-01

Four West Virginia hardwood stands, managed using individual-tree selection for the past 30 years, were examined after the third and, in one instance, the fourth periodic harvest to determine the severity of logging damage. On existing skid roads, trees were removed with a rubber-tired skidder or a crawler tractor with a rubber-tired arch. Logging damage reduced...

Vibration energy harvesting in railway tunnels with a wireless sensor node application

Energy Technology Data Exchange (ETDEWEB)

Wischke, Martin

2012-07-01

Vibration harvesting is a promising concept to prolong the lifetime of batterypowered stand-alone systems, or even to enable their energy-autonomy. This thesis focuses on ambient vibrations converted by electromechanical transducers into electricity. The final goal is energy scavenging from train-induced vibrations in railway tunnels. This is achieved via the development of a suitable harvester for this environment and the practical demonstration of a vibrationpowered wireless sensor node (WSN). At the beginning of this thesis, extensive vibration measurements were performed in several traffic tunnels. The obtained unique data set formed the basis for the design and test of several harvesters. The railway sleeper was chosen as usable harvester location. A shock-resistant double-side suspended piezoelectric cantilever was developed. Several cantilevers with different eigenfrequencies are combined in an array, creating a robust harvester with a broad bandwidth. A field test of 7 days in the Loetschbergbasis-tunnel verified that, on average the sufficient energy for powering a virtual wireless sensor node was scavenged. For application in a real WSN, the harvester array was scaled up to 10 cantilevers. The power management for the sensor node was developed concurrently. The central component is a power switch that monitors the energy level in the system's storage capacitor and only triggers the wireless interface when sufficient energy is available. Combined with a train detection circuit, the presented energy-autonomous WSN reliably reports every passing vehicle. In addition to the development of an energy-autonomous fully integrated WSN, this work investigates nonlinear properties of PZT ceramics. Consideration of the elastostriction and the electrostriction enables a more precises prediction of the tip displacement of a piezoelectric cantilever actuator. Further, the elastostriction is exploited to modify the resonance frequency of a bimorph cantilever. Basing

Comparison of Postoperative Pain Relief by Intercostal Block Between Pre-rib Harvest and Post-rib Harvest Groups

International Nuclear Information System (INIS)

Bashir, M. M.; Shahzad, M. A.; Yousaf, M. N.; Khan, B. A.; Khan, F. A.

2014-01-01

Objective: To compare intercostal nerve block before and after rib harvest in terms of mean postoperative pain score and mean postoperative tramadol usage. Study Design: Randomized controlled trial. Place and Duration of Study: Department of Plastic Surgery, Mayo Hospital, KEMU, Lahore, from January 2011 to July 2012. Methodology: Patients (n = 120) of either gender with ASA class-I and II requiring autogenous costal cartilage graft were inducted. Patients having history of local anaesthetic hypersensitivity and age 60 years were excluded. Subjects were randomly assigned to pre-rib harvest (group-1) and post-rib harvest (group-2). Local anaesthetic mixture was prepared by adding 10 milliliters 2% lidocaine to 10 milliliters 0.5% bupivacaine to obtain a total 20 ml solution. Group-1 received local anaesthetic infiltration along the proposed incision lines and intercostals block before the rib harvest. Group-2 received the infiltration and block after rib harvest. Postoperative consumption of tramadol and pain scores were measured at 6 and 12 hours postoperatively using VAS. Results: Mean age was 31.43 A +- 10.78 years. The mean pain scores at 6 hours postoperatively were 1.033 A +- 0.609 and 2.4667 A +- 0.812 in pre-rib harvest and post-rib harvest groups respectively (p < 0.0001). The mean pain scores at 12 hours postoperatively were 1.45 A +- 0.565 and 3.65 A +- 0.633 in pre-rib harvest and post-rib harvest groups respectively (p < 0.0001). The mean tramadol used postoperatively in first 24 hours was 169 A +- 29.24 mg and 255 A +- 17.70 mg in prerib harvest and post-rib harvest groups respectively (p < 0.0001). Conclusion: Intercostal block administered before rib harvest as preemptive strategy result in decreased postoperative pain scores and narcotic use. (author)

Desempenho de um trator em função do tipo de pneu, da lastragem e da velocidade de trabalho Performance of an tractor as a function of tire type, ballasting and forward speed

Directory of Open Access Journals (Sweden)

Afonso Lopes

2005-04-01

Full Text Available O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv em função do tipo de pneus (radial, diagonal e de baixa pressão, a condição de lastragem (com e sem água nos pneus e quatro velocidades [V1 (1,84km h-1, V2 (3,18km h-1, V3 (4,57km h-1, V4 (5,04km h-1]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30 diagonal (dianteiros-14.9-26, traseiros-23.1-30 e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.The objective of this study was to compare the performance of the FWD agricultural tractor, equipped with three types of tires (bias ply, radial and low pressure, with and without tire water ballasting, operating in four forward speed. The research was carried out at UNESP, SP, Brazil, with the tractor pulling a chisel plow. A tractor with 89kW (121cv engine power equipped with FWD, was used in the experiment, and the tires used had the following characteristics: radial (front: 14.9R26 and rear: 620/75R30, bias ply (front: 14.9-26 and rear: 23.1-30 and low pressure (front: 500/60-26.5 and rear: 700/55-34. The experiment was conducted in a completely randomized block, design (3x2x4, with 24 treatments and three replications. The results evidenced advantages for the tractor equipped with radial tires.

Nonlinear vibration analysis of the high-efficiency compressive-mode piezoelectric energy harvester

Science.gov (United States)

Yang, Zhengbao; Zu, Jean

2015-04-01

Power source is critical to achieve independent and autonomous operations of electronic mobile devices. The vibration-based energy harvesting is extensively studied recently, and recognized as a promising technology to realize inexhaustible power supply for small-scale electronics. Among various approaches, the piezoelectric energy harvesting has gained the most attention due to its high conversion efficiency and simple configurations. However, most of piezoelectric energy harvesters (PEHs) to date are based on bending-beam structures and can only generate limited power with a narrow working bandwidth. The insufficient electric output has greatly impeded their practical applications. In this paper, we present an innovative lead zirconate titanate (PZT) energy harvester, named high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH), to enhance the performance of energy harvesters. A theoretical model was developed analytically, and solved numerically to study the nonlinear characteristics of the HC-PEH. The results estimated by the developed model agree well with the experimental data from the fabricated prototype. The HC-PEH shows strong nonlinear responses, favorable working bandwidth and superior power output. Under a weak excitation of 0.3 g (g = 9.8 m/s2), a maximum power output 30 mW is generated at 22 Hz, which is about ten times better than current energy harvesters. The HC-PEH demonstrates the capability of generating enough power for most of wireless sensors.

Energy Harvesting for Structural Health Monitoring Sensor Networks

Energy Technology Data Exchange (ETDEWEB)

Park, G.; Farrar, C. R.; Todd, M. D.; Hodgkiss, T.; Rosing, T.

2007-02-26

This report has been developed based on information exchanges at a 2.5-day workshop on energy harvesting for embedded structural health monitoring (SHM) sensing systems that was held June 28-30, 2005, at Los Alamos National Laboratory. The workshop was hosted by the LANL/UCSD Engineering Institute (EI). This Institute is an education- and research-focused collaboration between Los Alamos National Laboratory (LANL) and the University of California, San Diego (UCSD), Jacobs School of Engineering. A Statistical Pattern Recognition paradigm for SHM is first presented and the concept of energy harvesting for embedded sensing systems is addressed with respect to the data acquisition portion of this paradigm. Next, various existing and emerging sensing modalities used for SHM and their respective power requirements are summarized, followed by a discussion of SHM sensor network paradigms, power requirements for these networks and power optimization strategies. Various approaches to energy harvesting and energy storage are discussed and limitations associated with the current technology are addressed. This discussion also addresses current energy harvesting applications and system integration issues. The report concludes by defining some future research directions and possible technology demonstrations that are aimed at transitioning the concept of energy harvesting for embedded SHM sensing systems from laboratory research to field-deployed engineering prototypes.

Managing harvest and habitat as integrated components

Science.gov (United States)

Osnas, Erik; Runge, Michael C.; Mattsson, Brady J.; Austin, Jane E.; Boomer, G. S.; Clark, R. G.; Devers, P.; Eadie, J. M.; Lonsdorf, E. V.; Tavernia, Brian G.

2014-01-01

In 2007, several important initiatives in the North American waterfowl management community called for an integrated approach to habitat and harvest management. The essence of the call for integration is that harvest and habitat management affect the same resources, yet exist as separate endeavours with very different regulatory contexts. A common modelling framework could help these management streams to better understand their mutual effects. Particularly, how does successful habitat management increase harvest potential? Also, how do regional habitat programmes and large-scale harvest strategies affect continental population sizes (a metric used to express habitat goals)? In the ensuing five years, several projects took on different aspects of these challenges. While all of these projects are still on-going, and are not yet sufficiently developed to produce guidance for management decisions, they have been influential in expanding the dialogue and producing some important emerging lessons. The first lesson has been that one of the more difficult aspects of integration is not the integration across decision contexts, but the integration across spatial and temporal scales. Habitat management occurs at local and regional scales. Harvest management decisions are made at a continental scale. How do these actions, taken at different scales, combine to influence waterfowl population dynamics at all scales? The second lesson has been that consideration of the interface of habitat and harvest management can generate important insights into the objectives underlying the decision context. Often the objectives are very complex and trade-off against one another. The third lesson follows from the second – if an understanding of the fundamental objectives is paramount, there is no escaping the need for a better understanding of human dimensions, specifically the desires of hunters and nonhunters and the role they play in conservation. In the end, the compelling question is

MECHANIZED HARVESTING TESTS PERFORMED BY GRAPE HARVESTERS IN SUPER INTENSIVE OLIVE ORCHARD CULTIVATION IN SPAIN

Directory of Open Access Journals (Sweden)

Gennaro Giametta

2009-06-01

Full Text Available Today also those countries boasting a century-old olive growing tradition have to look at the latest, most dynamic, non labour-intensive olive growing systems to abate production (notably, harvesting operations costs and remain competitive in a globalized market. This is why over the last few years super intensive olive orchard cultivation has been attracting a lot of interest on the part of olive growers all over the world as it accounts for an innovative model whereby olive groves are tailored to the special needs of grape harvesters. This paper reports the first results of experimental mechanical harvesting tests in a super-intensive olive cultivation. The study is intended to explore both productivity and work capacity of two of the most commonly used grape harvesters, Grégoire G120SW and New Holland Braud VX680, in a view to assessing their harvesting performance by a series of tests conducted in Spain. On the basis of the tests it was possible to verify that the machines are able to detach the almost all the drupes (more than 90%, with one only passage, and this independently of both size and location of drupes on the tree crown and of their maturity stage. Using these machines, two people can often carry out the whole harvest process: an operator driving the harvester and another person transferring the fruit from the harvester in the field to the olive oil mill for processing. With this system, the work speed is usually, in the best working conditions, about 1.7 km/hour and the average harvesting time is about 2.5-3 hours/ha. For the time being it is however impossible to draw definitive conclusions in terms of performance of the above cultivation systems and harvesting machines. Additional key observational studies are needed in the years to come to assess the efficiency of the entire model.

Design, Development, and Performance Evaluation of Solar Heating System for Disinfection of Domestic Roof-Harvested Rainwater.

Science.gov (United States)

Akintola, O A; Sangodoyin, A Y

2015-01-01

A box-type solar heater was designed, constructed, and used to determine the effect of solar heating on quality of domestic roof-harvested rainwater (DRHRW). During testing, naturally contaminated DRHRW was harvested in Ibadan, Nigeria, and released into the system at 93.96 Lh(-1) (2.61 × 10(-5) m(3) s(-1)) in a continuous flow process. Water temperatures at inlet, within the heating chamber, and at outlet from the heating chamber and solar radiation were monitored at 10 min interval. Samples were collected at both inlet to and outlet from the heating chamber at 10 min interval for microbiological analysis. The highest plate stagnation temperature, under no-load condition, was 100°C. The solar water heater attained a maximum operational temperature of 75°C with 89.6 and 94.4% reduction in total viable count and total coliform count, respectively, while Escherichia coli and Staphylococcus aureus were completely eradicated at this temperature. The solar heater developed proved to be effective in enhancing potability of DRHRW in Ibadan, Nigeria. This may be an appropriate household water treatment technology for developing countries, hence, a way of resolving problem of low quality water for potable uses.

Feasibility of Energy Harvesting Using a Piezoelectric Tire

Science.gov (United States)

Malotte, Christopher

While the piezoelectric effect has been around for some time, it has only recently caught interest as a potential sustainable energy harvesting device. Piezoelectric energy harvesting has been developed for shoes and panels, but has yet to be integrated into a marketable bicycle tire. For this thesis, the development and feasibility of a piezoelectric tire was done. This includes the development of a circuit that incorporates piezoceramic elements, energy harvesting circuitry, and an energy storage device. A single phase circuit was designed using an ac-dc diode rectifier. An electrolytic capacitor was used as the energy storage device. A financial feasibility was also done to determine targets for manufacturing cost and sales price. These models take into account market trends for high performance tires, economies of scale, and the possibility of government subsidies. This research will help understand the potential for the marketability of a piezoelectric energy harvesting tire that can create electricity for remote use. This study found that there are many obstacles that must be addressed before a piezoelectric tire can be marketed to the general public. The power output of this device is minuscule compared to an alkaline battery. In order for this device to approach the power output of an alkaline battery the weight of the device would also become an issue. Additionally this device is very costly compared to the average bicycle tire. Lastly, this device is extreme fragile and easily broken. In order for this device to become marketable the issues of power output, cost, weight, and durability must all be successfully overcome.

Energy-Harvesting Wireless Sensor Networks

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

2012-01-01

Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....... without any needs for battery recharge or replacement. However, energy harvesting introduces a change to the fundamental principles based on which WSNs are designed and realized. In this poster we sketch some of the key research challenges as well as our ongoing work in designing and realizing Wireless...

Piezoelectric energy harvesting for powering low power electronics

Energy Technology Data Exchange (ETDEWEB)

Leinonen, M.; Palosaari, J.; Hannu, J.; Juuti, J.; Jantunen, H. (Univ. of Oulu, Dept. of Electrical and Information Engineering (Finland)). email: jajuu@ee.oulu.fi

2009-07-01

Although wireless data transmission techniques are commonly used in electronic devices, they still suffer from wires for the power supply or from batteries which require charging, replacement and other maintenance. The vision for the portable electronics and industrial measurement systems of the future is that they are intelligent and independent on their energy supply. The major obstacle in this path is the energy source which enables all other functions and 'smartness' of the systems as the computing power is also restricted by the available energy. The development of long-life energy harvesters would reduce the need for batteries and wires thus enabling cost-effective and environment friendlier solutions for various applications such as autonomous wireless sensor networks, powering of portable electronics and other maintenance-free systems. One of the most promising techniques is mechanical energy harvesting e.g. by piezoelectric components where deformations produced by different means is directly converted to electrical charge via direct piezoelectric effect. Subsequently the electrical energy can be regulated or stored for further use. The total mechanical energy in vibration of machines can be very large and usually only a fraction of it can be transformed to electrical energy. Recently, piezoelectric vibration based energy harvesters have been developed widely for different energy consumption and application areas. As an example for low energy device an piezoelectric energy harvester based on impulse type excitations has been developed for active RFID identification. Moreover, piezoharvester with externally leveraged mechanism for force amplification was reported to be able to generate mean power of 0.4 mW from backpack movement. Significantly higher power levels are expected from larger scale testing in Israel, where piezoelectric material is embedded under active walking street, road, airport or railroad. The energy is harvested from human or

From tectonics to tractors: New insight into Earth's changing surface

Science.gov (United States)

Larsen, I. J.

2017-12-01

Weathering and erosion of rock and the transport of sediment continually modify Earth's surface. The transformation and transfer of material by both natural and anthropogenic processes drives global cycles and influences the habitability of our planet. By quantitatively linking erosional and depositional landforms to the processes that form them, we better understand how Earth's surface will evolve in the future, and gain the ability to look into the past to recognize how planetary surfaces evolved when environments were drastically different than today. Many of the recent advances in our understanding of the processes that influence landscape evolution have been driven by the development and application of tools such as cosmogenic nuclides, computational models, and digital topographic data. Here I present results gleaned from applying these tools to a diverse set of landscapes, where erosion is driven by factors ranging from tectonics to tractors, to provide insight into the mechanics, chemistry, and history of Earth's changing surface. I will first examine the landslide response of hillslopes in the Himalaya to spatial gradients in tectonic forcing to assess the paradigm of threshold hillslopes. Second, I will present soil production and chemical weathering rates measured in the Southern Alps of New Zealand to determine the relationship between physical erosion and chemical weathering in one of Earth's most rapidly uplifting landscapes, and discuss the implications for proposed links between mountain uplift and global climate. Third, I will discuss results from numerical flood simulations used to explore the interplay between outburst flood hydraulics and canyon incision in the Channeled Scablands of eastern Washington, and explore the implications for reconstructing discharge in flood-carved canyons on Earth and Mars. Finally, I will present new work that couples high resolution spectral and topographic data to estimate the spatial extent of agriculturally

A survey of silage management practices on California dairies.

Science.gov (United States)

Heguy, J M; Meyer, D; Silva-Del-Río, N

2016-02-01

The aim of the present study was to gather baseline information on corn silage-management practices to develop an outreach curriculum for dairy producers and growers. In spring 2013, dairy producers in the San Joaquin Valley (California) were surveyed on their silage-management practices. Response rate was 14.5% (n=160) and herd size averaged 1,512 milking cows. Harvest date was set solely by the dairy producer (53.4%) or with the assistance of the crop manager, custom chopper, or nutritionist (23.3%). On some dairies (23.3%), the dairy producer delegated the harvest date decision. Most dairies (75.0%) estimated crop dry matter before harvest, and the preferred method was milk line evaluation. Dairy producers were mostly unfamiliar with harvest rate but the number [1 (35.9%), 2 (50.3%), or 3 to 5 (13.8%)] and size [6-row (17.7%), 8-row (67.3%), or 10-row (15.0%)] of choppers working simultaneously was reported. Most dairies used a single packing tractor (68.8%) and weighed every load of fresh chopped corn delivered to the silage pit (62%). During harvest, dry matter (66.9%), particle length (80.4%), and kernel processing (92.5%) were monitored. Most dairies completed filling their largest silage structure in less than 3 d (48.5%) or in 4 to 7 d (30.9%). Silage covering was completed no later than 7 2h after structure completion in all dairies, and was often completed within 24 h (68.8%). Packed forage was covered as filled in 19.6% of dairies. Temporary covers were used on some dairies (51.0%), with filling durations of 1 to 60 d. When temporary covers were not used, structures were filled in no more than 15 d. After structure closure, silage feedout started in 1 to 3 wk (44.4%), 4 to 5 wk (31.4%), or 8 or more wk (24.2%). Future considerations included increasing the silage storage area (55.9%), increasing the number of packing tractors (37.0%), planting brown mid-rib varieties (34.4%), buying a defacer to remove silage (33.1%), and creating drive-over piles (32

EHRA: Specification and Analysis of Energy-Harvesting Wireless Sensor Networks

DEFF Research Database (Denmark)

Dung, Phan Anh; Hansen, Michael Reichhardt; Madsen, Jan

2014-01-01

Although energy consumption of wireless sensor network has been studied extensively, we are far behind in understanding the dynamics of the power consumption along with energy production using harvesters. We introduce Energy Harvesting Routing Analysis (EHRA) as a formal modelling framework...... to study wireless sensor networks (WSN) with energy-harvesting capabilities. The purpose of the framework is to analyze WSNs at a high level of abstraction, that is, before the protocols are implemented and before the WSN is deployed. The conceptual basis of EHRA comprises the environment, the medium...... is developed as a simulator implemented using the functional programming language F#. This simulator is used to analyze global properties of WSNs such as network fragmentation,routing trends, and energy profiles for the nodes. Three routing protocols, with a progression in the energy-harvesting awareness...

Human exhaled air energy harvesting with specific reference to PVDF film

Directory of Open Access Journals (Sweden)

Manisha Rajesh Mhetre

2017-02-01

Full Text Available Spirometer is a medical equipment used to measure lung capacity of a human being. It leads to diagnosis of several diseases. The researchers worked on harvesting energy from human exhalation while carrying out measurements using spirometer. A prototype has been developed using piezoelectric material i.e. PVDF (polyvinylidene fluoride film as sensor. This paper presents the methodology and experimentation carried out for exhaled air energy harvesting using PVDF film. Experimental results obtained are encouraging. Measurements are also carried out on various subjects having different height, weight, age and gender. Data analysis shows variation in the energy harvested with different physical parameters and gender. Experimentation shows that voltage generated due to exhaled air is promising for harvesting.

Chronic Wasting Disease: Transmission Mechanisms and the Possibility of Harvest Management

Science.gov (United States)

Potapov, Alex; Merrill, Evelyn; Pybus, Margo; Lewis, Mark A.

2016-01-01

We develop a model of CWD management by nonselective deer harvest, currently the most feasible approach available for managing CWD in wild populations. We use the model to explore the effects of 6 common harvest strategies on disease prevalence and to identify potential optimal harvest policies for reducing disease prevalence without population collapse. The model includes 4 deer categories (juveniles, adult females, younger adult males, older adult males) that may be harvested at different rates, a food-based carrying capacity, which influences juvenile survival but not adult reproduction or survival, and seasonal force of infection terms for each deer category under differing frequency-dependent transmission dynamics resulting from environmental and direct contact mechanisms. Numerical experiments show that the interval of transmission coefficients β where the disease can be controlled is generally narrow and efficiency of a harvest policy to reduce disease prevalence depends crucially on the details of the disease transmission mechanism, in particular on the intensity of disease transmission to juveniles and the potential differences in the behavior of older and younger males that influence contact rates. Optimal harvest policy to minimize disease prevalence for each of the assumed transmission mechanisms is shown to depend on harvest intensity. Across mechanisms, a harvest that focuses on antlered deer, without distinguishing between age classes reduces disease prevalence most consistently, whereas distinguishing between young and older antlered deer produces higher uncertainty in the harvest effects on disease prevalence. Our results show that, despite uncertainties, a modelling approach can determine classes of harvest strategy that are most likely to be effective in combatting CWD. PMID:26963921

Energy harvesting for microsystems

DEFF Research Database (Denmark)

Xu, Ruichao

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has...... the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate...... power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 µm silicon layer and 10-30 µm screen printed...

Post-harvest Proteomics and Food Security

NARCIS (Netherlands)

Pedreschi Plasencia, R.P.; Lurie, S.; Hertog, W.; Nicolai, B.; Mes, J.J.; Woltering, E.J.

2013-01-01

To guarantee sufficient food supply for a growing world population, efforts towards improving crop yield and plant resistance should be complemented with efforts to reduce postharvest losses. Post-harvest losses are substantial and occur at different stages of the food chain in developed and

Bistable energy harvesting enhancement with an auxiliary linear oscillator

Science.gov (United States)

Harne, R. L.; Thota, M.; Wang, K. W.

2013-12-01

Recent work has indicated that linear vibrational energy harvesters with an appended degree-of-freedom (DOF) may be advantageous for introducing new dynamic forms to extend the operational bandwidth. Given the additional interest in bistable harvester designs, which exhibit a propitious snap through effect from one stable state to the other, it is a logical extension to explore the influence of an added DOF to a bistable system. However, bistable snap through is not a resonant phenomenon, which tempers the presumption that the dynamics induced by an additional DOF on bistable designs would inherently be beneficial as for linear systems. This paper presents two analytical formulations to assess the fundamental and superharmonic steady-state dynamics of an excited bistable energy harvester to which is attached an auxiliary linear oscillator. From an energy harvesting perspective, the model predicts that the additional linear DOF uniformly amplifies the bistable harvester response magnitude and generated power for excitation frequencies less than the attachment’s resonance while improved power density spans a bandwidth below this frequency. Analyses predict bandwidths having co-existent responses composed of a unique proportion of fundamental and superharmonic dynamics. Experiments validate key analytical predictions and observe the ability for the coupled system to develop an advantageous multi-harmonic interwell response when the initial conditions are insufficient for continuous high-energy orbit at the excitation frequency. Overall, the addition of an auxiliary linear oscillator to a bistable harvester is found to be an effective means of enhancing the energy harvesting performance and robustness.

Nonlinear analysis and characteristics of inductive galloping energy harvesters

Science.gov (United States)

Dai, H. L.; Yang, Y. W.; Abdelkefi, A.; Wang, L.

2018-06-01

This paper presents an investigation on analysis and characteristics of aerodynamic electromagnetic energy harvesters. The source of aeroelastic oscillations results from galloping of a prismatic structure. A nonlinear distributed-parameter model is developed representing the dynamics of the transverse degree of freedom and the electric current induced in the coil. Firstly, we perform a linear analysis to study the impacts of the external electrical resistance, magnet placement, electromagnetic coupling coefficient, and internal resistance in the coil on the cut-in speed of instability of the coupled electroaeroelastic system. It is demonstrated that these parameters have significant impacts on cut-in speed of instability of the harvester system. Subsequently, a nonlinear analysis is implemented to explore the influences of these parameters on the output property of the energy harvester. The results show that there exists an optimal external electrical resistance which maximizes the output power of the harvester, and this optimal value varies with the magnet's placement, wind speed, electromagnetic coupling coefficient and internal resistance of the coil. It is also demonstrated that an increase in the distance between the clamped end and the magnet, an increase in the electromagnetic coupling coefficient, and/or a decrease in the internal resistance of the coil are accompanied by an increase in the level of the harvested power and a decrease in the tip displacement of the bluff body which is associated with a resistive-shunt damping effect in the harvester. The implemented studies give a constructive guidance to design and enhance the output performance of aerodynamic electromagnetic energy harvesters.

Micro energy harvesting

CERN Document Server

Briand, Danick; Roundy, Shad

2015-01-01

With its inclusion of the fundamentals, systems and applications, this reference provides readers with the basics of micro energy conversion along with expert knowledge on system electronics and real-life microdevices. The authors address different aspects of energy harvesting at the micro scale with a focus on miniaturized and microfabricated devices. Along the way they provide an overview of the field by compiling knowledge on the design, materials development, device realization and aspects of system integration, covering emerging technologies, as well as applications in power management, e

Review on energy harvesting for structural health monitoring in aeronautical applications

Science.gov (United States)

Le, Minh Quyen; Capsal, Jean-Fabien; Lallart, Mickaël; Hebrard, Yoann; Van Der Ham, Andre; Reffe, Nicolas; Geynet, Lionel; Cottinet, Pierre-Jean

2015-11-01

This paper reviews recent developments in energy harvesting technologies for structural health monitoring (SHM) in aeronautical applications. Aeronautical industries show a great deal of interest in obtaining technologies that can be used to monitor the health of machinery and structures. In particular, the need for self-sufficient monitoring of structures has been ever-increasing in recent years. Autonomous SHM systems typically include embedded sensors, and elements for data acquisition, wireless communication, and energy harvesting. Among all of these components, this paper focuses on energy harvesting technologies. Actually, low-power sensors and wireless communication components are used in newer SHM systems, and a number of researchers have recently investigated such techniques to extract energy from the local environment to power these stand-alone systems. The first part of the paper is dedicated to the different energy sources available in aeronautical applications, i.e., for airplanes and helicopters. The second part gives a presentation of the various devices developed for converting ambient energy into electric power. The last part is dedicated to a comparison of the different technologies and the future development of energy harvesting for aeronautical applications.

Control of electro-chemical processes using energy harvesting materials and devices.

Science.gov (United States)

Zhang, Yan; Xie, Mengying; Adamaki, Vana; Khanbareh, Hamideh; Bowen, Chris R

2017-12-11

Energy harvesting is a topic of intense interest that aims to convert ambient forms of energy such as mechanical motion, light and heat, which are otherwise wasted, into useful energy. In many cases the energy harvester or nanogenerator converts motion, heat or light into electrical energy, which is subsequently rectified and stored within capacitors for applications such as wireless and self-powered sensors or low-power electronics. This review covers the new and emerging area that aims to directly couple energy harvesting materials and devices with electro-chemical systems. The harvesting approaches to be covered include pyroelectric, piezoelectric, triboelectric, flexoelectric, thermoelectric and photovoltaic effects. These are used to influence a variety of electro-chemical systems such as applications related to water splitting, catalysis, corrosion protection, degradation of pollutants, disinfection of bacteria and material synthesis. Comparisons are made between the range harvesting approaches and the modes of operation are described. Future directions for the development of electro-chemical harvesting systems are highlighted and the potential for new applications and hybrid approaches are discussed.

Acidentes de trabalho envolvendo conjuntos tratorizados em propriedades rurais do Rio Grande do Sul, Brasil Work accidents involving tractor-implement systems in farms of Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Henrique Debiasi

2004-06-01

Full Text Available O presente trabalho teve como objetivo determinar as causas genéricas e específicas dos acidentes de trabalho envolvendo conjuntos tratorizados, no intuito de subsidiar a tomada de medidas mais efetivas de prevenção dos mesmos. A pesquisa foi executada em 21 municípios pertencentes a três microregiões geográficas do Rio Grande do Sul: Santa Maria, Restinga Seca e Cachoeira do Sul. Foram amostradas aleatoriamente 114 propriedades, dentro das quais 141 operadores foram entrevistados. Os acidentes analisados foram tanto aqueles ocorridos com o proprietário ou empregados da propriedade amostrada como aqueles ocorridos com operadores não pertencentes à propriedade, mas dos quais os entrevistados tinham conhecimento. 82% dos acidentes de trabalho envolvendo conjuntos tratorizados foram causados por atitudes inseguras e 18% por condições inseguras. As principais causas específicas de acidentes foram a operação do trator em condições para as quais não foi projetado, a perda de controle em aclives/declives, a permissão de carona e o consumo excessivo de álcool. Com base nestes resultados, pode-se concluir que as ações visando à prevenção dos acidentes de trabalho envolvendo conjuntos tratorizados devem dar ênfase à eliminação das causas específicas apuradas.The objective of this work was to determine generic and specific causes of work accidents involving tractor-implement systems, to help taking more effective prevetion measures. The research was carried out in twenty-one municipal districts belonging to three regions of Rio Grande do Sul State, Brazil: Santa Maria, Restinga Seca e Cachoeira do Sul. 114 farms were randomly sampled in these regions, in which 141 operators were evaluated. The accidents analyzed were both te ones that occurred with the owner or employees of the same farm and the ones that occured with operators not belonging that farm - but whose cases were known by the interwiees - 82% of the work accidents

Estimating and validating ground-based timber harvesting production through computer simulation

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux

2003-01-01

Estimating ground-based timber harvesting systems production with an object oriented methodology was investigated. The estimation model developed generates stands of trees, simulates chain saw, drive-to-tree feller-buncher, swing-to-tree single-grip harvester felling, and grapple skidder and forwarder extraction activities, and analyzes costs and productivity. It also...

Design and test on 4B-1200 type bulbus fritillariae ussuriensis medicinal material harvester%4B-1200型平贝母药材收获机的设计与试验

Institute of Scientific and Technical Information of China (English)

宋江; 邱胜蓝; 王新忠

2015-01-01

at the above problems, the research team has been dedicated to the research on the fritillaria mechanical harvesting, focusing on the two key technologies containing level screening and mining technology of bulbus fritillariae ussuriensis. Sectional terms of mechanized harvesting method had been proposed in the past, and correspondingly level screening machinery and excavator of bulbus fritillariae ussuriensis had been developed, but the efficiency was low and the production cost was relatively high, so in order to solve these problems above, the fritillaria harvester matched with a walking tractor is designed in this study. The machine mainly consists of a scraping mechanism, a digging shovel, a vibration screen, below-sift separate shellfish and soil mechanism, bagging apparatus, transmission system, frame, land wheels and other key components. It is obtained by formula derivation that the width of bulldozing shovel is 1400 mm, the height of bulldozing shovel wing is 500 mm, the shovel wing surface radius is 400 mm, the shovel wing plane width is 120 mm, the shovel wing angle is 120°, the breaking ground angle is 65°, and the forward turning angle is 75°;and the shovel surface width of digging shovel is 1200 mm, the level inclination of shovel surface is 26°, the shovel surface is 140 mm long, the spacing of digging shovel’s end grid is 8 mm, and the grid length is 40 mm. By analyzing the four-bar mechanism based on analytical graphic method, it is determined that the speed range of vibration sieve crank is 240-535 rad/min and within this range the mixture of bulbus fritillariae ussuriensis and soil can pass successfully. It is shown by the force analysis of the reverse spiral blade that the spiral blade speed of soil separating part below sieve is less than 4 m/s. By means of UG (Unigraphics NX) software, the three-dimensional model of bulbus fritillariae ussuriensis medicinal materials harvester is programmed to assemble the parts and analyze the

Post-harvest technologies for various crops of pakistan: status quo, employment generation and prospects

International Nuclear Information System (INIS)

Ahmad, M.

2005-01-01

The climatic conditions of Pakistan vary from tropical to temperate, allow 40 different kinds of vegetables, 21 type of fruit, and 5 major crops (wheat, cotton, rice, sugarcane, and maize) to grow. During the peak harvest-season, a great proportion of fresh agricultural/horticultural produce is lost, due to unavailability of suitable post-harvest technologies. An effort was made to present the status quo, constraints, Government policies and possible post-harvest technologies that can be developed/adopted in the country to generate employment in the rural areas. Secondary processing-industry (flour mills, sugar mills, oil mills etc.) is fairly developed in the country. However. primary processing of agricultural produce is poorly developed in the country. The higher cost of the processed products, consumers habits of eating fresh commodities, seasonability of fresh fruit and vegetables, and low quality of the processed products are the key-constraints for the slow growth of post-harvest processing industry. By removing these constraints, and by developing/adopting various technologies, identified in this paper, we may help to establish post-harvest processing industry on sound footings. Consequently, the employment-opportunities will increase in the rural areas of the country. (author)

Performance evaluation of prototype mechanical cassava harvester ...

African Journals Online (AJOL)

Large-scale cassava harvesting, especially during the dry season, is a major constraint to its industrial demand and commercial production. Manual harvesting is slow and ... Results from field trials showed prototype harvesters weighing 268 – 310 kg can achieve optimum performance on ridged landforms. When harvested ...

Flow Energy Piezoelectric Bimorph Nozzle Harvester

Science.gov (United States)

Sherrit, Stewart (Inventor); Walkemeyer, Phillip E. (Inventor); Hall, Jeffrey L. (Inventor); Lee, Hyeong Jae (Inventor); Colonius, Tim (Inventor); Tosi, Phillipe (Inventor); Kim, Namhyo (Inventor); Sun, Kai (Inventor); Corbett, Thomas Gary (Inventor); Arrazola, Alvaro Jose (Inventor)

2016-01-01

A flow energy harvesting device having a harvester pipe includes a flow inlet that receives flow from a primary pipe, a flow outlet that returns the flow into the primary pipe, and a flow diverter within the harvester pipe having an inlet section coupled to the flow inlet, a flow constriction section coupled to the inlet section and positioned at a midpoint of the harvester pipe and having a spline shape with a substantially reduced flow opening size at a constriction point along the spline shape, and an outlet section coupled to the constriction section. The harvester pipe may further include a piezoelectric structure extending from the inlet section through the constriction section and point such that the fluid flow past the constriction point results in oscillatory pressure amplitude inducing vibrations in the piezoelectric structure sufficient to cause a direct piezoelectric effect and to generate electrical power for harvesting.

Systems for harvesting and handling cotton plant residue

Energy Technology Data Exchange (ETDEWEB)

Coates, W. [Univ. of Arizona, Tucson, AZ (United States)

1993-12-31

In the warmer regions of the United States, cotton plant residue must be buried to prevent it from serving as an overwintering site for insect pests such as the pink bollworm. Most of the field operations used to bury the residue are high energy consumers and tend to degrade soil structure, thereby increasing the potential for erosion. The residue is of little value as a soil amendment and consequently is considered a negative value biomass. A commercial system to harvest cotton plant residue would be of both economic and environmental benefit to cotton producers. Research has been underway at the University of Arizona since the spring of 1991 to develop a commercially viable system for harvesting cotton plant residue. Equipment durability, degree of densification, energy required, cleanliness of the harvested material, and ease of product handling and transport are some of the performance variables which have been measured. Two systems have proven superior. In both, the plants are pulled from the ground using an implement developed specifically for the purpose. In one system, the stalks are baled using a large round baler, while in the other the stalks are chopped with a forage harvester, and then made into packages using a cotton module maker. Field capacities, energy requirements, package density and durability, and ease of handling with commercially available equipment have been measured for both systems. Selection of an optimum system for a specific operation depends upon end use of the product, and upon equipment availability.

Response of Biomass Development, Essential Oil, and Composition of Plectranthus amboinicus (Lour.) Spreng. to Irrigation Frequency and Harvest Time.

Science.gov (United States)

Sabra, Ali S; Astatkie, Tessema; Alataway, Abed; Mahmoud, Abeer A; Gendy, Ahmed S H; Said-Al Ahl, Hussein A H; Tkachenko, Kirill G

2018-03-01

A greenhouse experiment was conducted to study the effects of four irrigation intervals (4, 8, 12, and 16 days) and six harvests (2, 4, 6, 8, 10, and 12 months after transplanting) on biomass, essential oil content, and composition of Plectranthus amboinicus (Lour.) Spreng. Fresh weight and essential oil yield decreased with increasing irrigation interval; whereas, essential oil content was stimulated by water stress and increased as the irrigation interval increased. Fresh weight of Plectranthus amboinicus irrigated every 4 days peaked when harvested at 6 months, but essential oil content peaked when irrigated every 16 days and harvested at 2 months after transplantation. On the other hand, essential oil yield peaked when irrigated every 8 days and harvested at 6 months. Thymol, p-cymene, γ-terpinene, and β-caryophyllene were the major compounds, and they peaked at different irrigation intervals and harvest times. This study showed biomass, essential oil content, and yield as well as the major and minor constituents of Plectranthus amboinicus are influenced by irrigation interval and the timing of harvest. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Firmness at Harvest Impacts Postharvest Fruit Softening and Internal Browning Development in Mechanically Damaged and Non-damaged Highbush Blueberries (Vaccinium corymbosum L.).

Science.gov (United States)

Moggia, Claudia; Graell, Jordi; Lara, Isabel; González, Guillermina; Lobos, Gustavo A

2017-01-01

Fresh blueberries are very susceptible to mechanical damage, which limits postharvest life and firmness. Softening and susceptibility of cultivars "Duke" and "Brigitta" to developing internal browning (IB) after mechanical impact and subsequent storage was evaluated during a 2-year study (2011/2012, 2012/2013). On each season fruit were carefully hand-picked, segregated into soft (<1.60 N), medium (1.61-1.80 N), and firm (1.81-2.00 N) categories, and then either were dropped (32 cm) onto a hard plastic surface or remained non-dropped. All fruit were kept under refrigerated storage (0°C and 85-88% relative humidity) to assess firmness loss and IB after 7, 14, 21, 28, and 35 days. In general, regardless of cultivar or season, high variability in fruit firmness was observed within each commercial harvest, and significant differences in IB and softening rates were found. "Duke" exhibited high softening rates, as well as high and significant r 2 between firmness and IB, but little differences for dropped vs. non-dropped fruit. "Brigitta," having lesser firmness rates, exhibited almost no relationships between firmness and IB (especially for non-dropped fruit), but marked differences between dropping treatments. Firmness loss and IB development were related to firmness at harvest, soft and firm fruit being the most and least damaged, respectively. Soft fruit were characterized by greater IB development during storage along with high soluble solids/acid ratio, which could be used together with firmness to estimate harvest date and storage potential of fruit. Results of this work suggest that the differences in fruit quality traits at harvest could be related to the time that fruit stay on the plant after turning blue, soft fruit being more advanced in maturity. Finally, the observed differences between segregated categories reinforce the importance of analyzing fruit condition for each sorted group separately.

Social-Ecological Soundscapes: Examining Aircraft-Harvester-Caribou Conflict in Arctic Alaska

Science.gov (United States)

Stinchcomb, Taylor R.

As human development expands across the Arctic, it is crucial to carefully assess the impacts to remote natural ecosystems and to indigenous communities that rely on wild resources for nutritional and cultural wellbeing. Because indigenous communities and wildlife populations are interdependent, assessing how human activities impact traditional harvest practices can advance our understanding of the human dimensions of wildlife management. Indigenous communities across Arctic Alaska have expressed concern over the last four decades that low-flying aircraft interfere with their traditional harvest practices. For example, communities often have testified that aircraft disturb caribou (Rangifer tarandus) and thereby reduce harvest opportunities. Despite this longstanding concern, little research exists on the extent of aircraft activity in Arctic Alaska and on how aircraft affect the behavior and perceptions of harvesters. Therefore, the overarching goal of my research was to highlight the importance of aircraft-harvester conflict in Arctic Alaska and begin to address the issue using a scientific and community-driven approach. In Chapter 1, I demonstrated that conflict between aircraft and indigenous harvesters in Arctic Alaska is a widespread, understudied, and complex issue. By conducting a meta-analysis of the available literature, I quantified the deficiency of scientific knowledge about the impacts of aircraft on rural communities and traditional harvest practices in the Arctic. My results indicated that no peer-reviewed literature has addressed the conflict between low-flying aircraft and traditional harvesters in Arctic Alaska. I speculated that the scale over which aircraft, rural communities, and wildlife interact limits scientists' ability to determine causal relationships and therefore detracts from their interest in researching the human dimension of this social-ecological system. Innovative research approaches like soundscape ecology could begin to

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency

DEFF Research Database (Denmark)

Kandel, Tanka Prasad; Sutaryo, Sutaryo; Møller, Henrik Bjarne

2013-01-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn...... as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kg VS)-1 for leaf and stem, respectively. Approximately 45% more methane...... was produced by the TC-F management (5430 Nm3 ha-1) as by the OC management (3735 Nm3 ha-1). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass...

Complex epsilon-near-zero metamaterials for broadband light harvesting systems

KAUST Repository

Bonifazi, Marcella; Tian, Yi; Fratalocchi, Andrea

2018-01-01

We engineered an epsilon-near-zero (ENZ) material from suitably disordered metallic nanostructures. We create a new class of dispersionless composite materials that efficiently harnesses white light. By means of Atomic Force Microscopy (AFM) and Photoluminescence (PLE) measurements we experimentally demonstrate that this nanomaterial increases up to a record value the absorption of ultra-thin light harvesting films at visible and infrared wavelengths. Moreover, we obtained a 170% broadband increase of the external quantum efficiency (EQE) when these ENZ materials are inserted in an energy-harvesting module. We developed an inexpensive electrochemical deposition process that enables large-scale production of this material for energy-harvesting applications.

Complex epsilon-near-zero metamaterials for broadband light harvesting systems

KAUST Repository

Bonifazi, Marcella

2018-02-17

We engineered an epsilon-near-zero (ENZ) material from suitably disordered metallic nanostructures. We create a new class of dispersionless composite materials that efficiently harnesses white light. By means of Atomic Force Microscopy (AFM) and Photoluminescence (PLE) measurements we experimentally demonstrate that this nanomaterial increases up to a record value the absorption of ultra-thin light harvesting films at visible and infrared wavelengths. Moreover, we obtained a 170% broadband increase of the external quantum efficiency (EQE) when these ENZ materials are inserted in an energy-harvesting module. We developed an inexpensive electrochemical deposition process that enables large-scale production of this material for energy-harvesting applications.

Assessment of pre-harvest aflatoxin and fumonisin contamination of ...

African Journals Online (AJOL)

Assessment of pre-harvest aflatoxin and fumonisin contamination of maize in Babati District, Tanzania. ... African Journal of Food, Agriculture, Nutrition and Development ... As well as participating in a development program, Africa Research in ...

Analisis dan Perancangan Aplikasi Pendukung Erp Sap R/3 Modul Sales and Distribution PT. United Tractors, Tbk

Directory of Open Access Journals (Sweden)

Johan Johan

2010-12-01

Full Text Available The purpose of this research is to analyse sales process having been implementing Sales and Distribution module of ERP SAP R/3 and also to design a supporting application for sales process at PT United Tractor, Tbk. The benefit of this application is to help sales person and customer in doing inquiries, quotation and sales order also material information through short message. The method of this research is data capturing, literature review, object oriented analysis and design and Rational Unified process including UML ( Unified Modeling Language for application design. Based on the problem, we designed a web based and sms gateway application to support Sales and Distribution module ERP SAP R/3 to help customer and sales person in doing sales transaction and information inquiry. 

Wireless energy transmission to supplement energy harvesters in sensor network applications

Energy Technology Data Exchange (ETDEWEB)

Farinholt, Kevin M [Los Alamos National Laboratory; Taylor, Stuart G [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Farrar, Charles R [Los Alamos National Laboratory

2010-01-01

In this paper we present a method for coupling wireless energy transmission with traditional energy harvesting techniques in order to power sensor nodes for structural health monitoring applications. The goal of this study is to develop a system that can be permanently embedded within civil structures without the need for on-board power sources. Wireless energy transmission is included to supplement energy harvesting techniques that rely on ambient or environmental, energy sources. This approach combines several transducer types that harvest ambient energy with wireless transmission sources, providing a robust solution that does not rely on a single energy source. Experimental results from laboratory and field experiments are presented to address duty cycle limitations of conventional energy harvesting techniques, and the advantages gained by incorporating a wireless energy transmission subsystem. Methods of increasing the efficiency, energy storage medium, target applications and the integrated use of energy harvesting sources with wireless energy transmission will be discussed.

Still special? Harvesting procedures for industrial hemp

Directory of Open Access Journals (Sweden)

Hans-Jörg Gusovius

2016-01-01

Full Text Available A multitude of different harvesting procedures is available after the re-approval of hemp growing in Germany about 20 years ago. Established, but as well recent machine developments enable the supply of raw materials for further processing or as food and feed materials. The necessary specialization level results in high but, compared to other established crops, not exceeding procedural costs. In this study, harvesting procedures and technologies are analyzed that are currently used under Northern European cultivation conditions. However, technological enhancements are still needed in order to improve the competitiveness of fibre hemp in the crop rotation as well as of hemp-based semi-finished and finished products.

Freeze cast porous barium titanate for enhanced piezoelectric energy harvesting

Science.gov (United States)

Roscow, J. I.; Zhang, Y.; Kraśny, M. J.; Lewis, R. W. C.; Taylor, J.; Bowen, C. R.

2018-06-01

Energy harvesting is an important developing technology for a new generation of self-powered sensor networks. This paper demonstrates the significant improvement in the piezoelectric energy harvesting performance of barium titanate by forming highly aligned porosity using freeze casting. Firstly, a finite element model demonstrating the effect of pore morphology and angle with respect to poling field on the poling behaviour of porous ferroelectrics was developed. A second model was then developed to understand the influence of microstructure-property relationships on the poling behaviour of porous freeze cast ferroelectric materials and their resultant piezoelectric and energy harvesting properties. To compare with model predictions, porous barium titanate was fabricated using freeze casting to form highly aligned microstructures with excellent longitudinal piezoelectric strain coefficients, d 33. The freeze cast barium titanate with 45 vol.% porosity had a d 33  =  134.5 pC N‑1 compared to d 33  =  144.5 pC N‑1 for dense barium titanate. The d 33 coefficients of the freeze cast materials were also higher than materials with uniformly distributed spherical porosity due to improved poling of the aligned microstructures, as predicted by the models. Both model and experimental data indicated that introducing porosity provides a large reduction in the permittivity () of barium titanate, which leads to a substantial increase in energy harvesting figure of merit, , with a maximum of 3.79 pm2 N‑1 for barium titanate with 45 vol.% porosity, compared to only 1.40 pm2 N‑1 for dense barium titanate. Dense and porous barium titanate materials were then used to harvest energy from a mechanical excitation by rectification and storage of the piezoelectric charge on a capacitor. The porous barium titanate charged the capacitor to a voltage of 234 mV compared to 96 mV for the dense material, indicating a 2.4-fold increase that was similar to that

Nonlinear analysis and enhancement of wing-based piezoaeroelastic energy harvesters

KAUST Repository

Abdelkefi, Abdessattar

2014-01-01

We investigate the level of harvested power from aeroelastic vibrations for an elastically mounted wing supported by nonlinear springs. The energy is harvested by attaching a piezoelectric transducer to the plunge degree of freedom. The considered wing has a low-aspect ratio and hence three dimensional aerodynamic effects cannot be neglected. To this end, the three dimensional unsteady vortex lattice method for the prediction of the unsteady aerodynamic loads is developed. A strong coupling scheme that is based on Hamming\\'s fourth-order predictor-corrector method and accounts for the interaction between the aerodynamic loads and the motion of the wing is employed. The effects of the electrical load resistance, nonlinear torsional spring and eccentricity between the elastic axis and the gravity axis on the level of the harvested power, pitch and plunge amplitudes are investigated for a range of operating wind speeds. The results show that there is a specific wind speed beyond which the pitch motion does not pick any further energy from the incident flow. As such, the displacement in the plunge direction grows significantly and causes enhanced energy harvesting. The results also show that the nonlinear torsional spring plays an important role in enhancing the level of the harvested power. Furthermore, the harvested power can be increased by an order of magnitude by properly choosing the eccentricity and the load resistance. This analysis is helpful in designing piezoaeroelastic energy harvesters that can operate optimally at specific wind speeds. © 2013 Elsevier Ltd.

Magnetic Nanocomposite Cilia Energy Harvester

KAUST Repository

Khan, Mohammed Asadullah; Alfadhel, Ahmed; Kosel, Jü rgen

2016-01-01

An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized

1970 Oregon timber harvest.

Science.gov (United States)

Brian R. Wall

1971-01-01

The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

Evaluation of chips quality by the analysis of two different harvesting methodologies

Energy Technology Data Exchange (ETDEWEB)

Pari, L.; Civitarese, V.; Del Giudice, A. [Council for Research in Agriculture, Agricultural Engineering Research Unit, Rome (Italy)

2010-07-01

The Council for Research in Agriculture, Agricultural Engineering Research Unit (CRA-ING) in Rome, Italy has developed an innovative short-rotation forestry (SRF) harvesting system. The system involves a 2 step operation, notably the tree felling and inter-row windrowing performed by a feller windrower equipment; and subsequent chipping performed by a harvester equipped with a pick-up device. The low moisture content of the windrowed trees at harvesting time affects their physical qualities and mechanical strength throughout the chipping operation. The purpose of this study was to analyze the moisture losses of windrowed trees, in relation to the windrow location, on field storage and weather condition. In addition, the study characterized chips quality changes during on field storage by the 2 different harvesting systems. The innovative 2-step system was compared with the traditional 1-step harvesting system.

A Hip Implant Energy Harvester

Science.gov (United States)

Pancharoen, K.; Zhu, D.; Beeby, S. P.

2014-11-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω.

A Hip Implant Energy Harvester

International Nuclear Information System (INIS)

Pancharoen, K; Zhu, D; Beeby, S P

2014-01-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω

Human Motion Energy Harvester for Biometric Data Monitoring

International Nuclear Information System (INIS)

Hoffmann, D; Folkmer, B; Manoli, Y

2013-01-01

In this paper we present an energy autonomous sensor system fully integrated into the heel of a shoe for biometric data monitoring. For powering the wireless sensor system a pulse-driven energy harvester was developed, which uses the acceleration-impulses from heel-strike during walking. In preparation of the device development acceleration measurements were carried out. The pulse-driven energy harvester is based on the electromagnetic conversion principle and incorporates a 4×4 coil matrix. A beam fixed at both ends is used for suspending the magnetic circuit. The geometric parameters of coil and magnetic circuit were optimized for maximum power output. For an idealized acceleration pulse with a width of 5 ms and a height of 200 m/s 2 an average power output of 0.7 mW was generated using a step frequency of 1 Hz. The functionality of the self-sustained sensor system is demonstrated by measuring the temperature and step-frequency of a walking person and transmitting the data to a base station. We also found that the implementation of the suspension can have a significant impact on the harvester performance reducing the power output

Desempenho operacional de um trator agrícola equipado alternadamente com pneus radiais e diagonais Operational performance of an agricultural tractor equipped alternately with radial and diagonal tires

Directory of Open Access Journals (Sweden)

Jackson A. Barbosa

2005-08-01

Full Text Available A utilização de pneu radial em tratores agrícolas na década de 1950 resultou em redução das perdas de potência oriundas da resistência ao rolamento e patinagem, com conseqüente melhoria no desenvolvimento da tração. Este trabalho teve como objetivo comparar o desempenho operacional de um trator agrícola equipado alternadamente com pneus radiais e diagonais. A avaliação foi realizada a partir de análises de parâmetros indicadores do desempenho dos referidos pneus sob condições específicas de trabalho. O uso de pneus radiais proporcionou incrementos nos valores de capacidade de tração e potência na barra, diminuição nos valores de consumo específico de combustível e não causou variações no consumo horário de combustível.The use of radial tire in agricultural tractors in the decade of 1950 resulted in the reduction of the potency losses originated from the rolling resistance and slippage, with consequent improvement in the traction development. This work had as objective to compare the operational performance of an agricultural tractor, equipped alternately with radial and diagonal tires. The evaluation was accomplished, starting from analyses of indicative parameters of the performance of the referred tires under specific conditions of work. The use of radial tires provided increments in the values of traction capacity and drawbar pull, decrease in values of specific consumption of fuel, and didn't cause variations in the hourly consumption of fuel.

Monsoon Harvests: Assessing the Impact of Rainwater Harvesting Ponds on Subsistence-Level Agriculture in the Gundar Basin, Tamil Nadu, India

Science.gov (United States)

Steiff, M.; Van Meter, K. J.; Basu, N. B.

2013-12-01

Lack of consistent water availability for irrigated agriculture is recognized as one of the primary constraints to meeting the UN Millennium Development Goals to alleviate hunger, and in semi-arid landscapes such as those of southern India, which are characterized by high intra-annual variability in rainfall, provision of capabilities for seasonal storage is recognized to be one of the key strategies towards alleviating water scarcity problems and ensuring food security. Although the issue of increased storage can be addressed by centralized infrastructure projects such as large-scale irrigation systems and dams, an alternative is the "soft path" approach, in which existing large-scale projects are complemented by small-scale, decentralized solutions. Such a decentralized approach has been utilized in southern India for thousands of years in the form of village rainwater harvesting tanks or ponds, providing a local and inherently sustainable approach to providing sufficient water for rice cultivation. Over the last century, however, large-scale canal projects and groundwater pumping have replaced rainwater harvesting as the primary source of irrigation water. But with groundwater withdrawals now exceeding recharge in many areas and water tables continuing to drop, many NGOs and government agencies are advocating for a revival of the older rainwater harvesting systems. Questions remain, however, regarding the limits to which rainwater harvesting can provide a solution to decades of water overexploitation. In the present work, we have utilized secondary data sources to analyze the linkages between the tank irrigation systems and the village communities that depend on them within the Gundar Basin of southern Tamil Nadu. Combining socioeconomic data with information regarding climate, land use, groundwater depletion, and tank density, we have developed indicators of sustainability for these systems. Using these indicators, we have attempted to unravel the close

Studies on optimum harvest time for hybrid rice seed.

Science.gov (United States)

Fu, Hong; Cao, Dong-Dong; Hu, Wei-Min; Guan, Ya-Jing; Fu, Yu-Ying; Fang, Yong-Feng; Hu, Jin

2017-03-01

Timely harvest is critical for hybrid rice to achieve maximum seed viability, vigor and yield. However, how to predict the optimum harvest time has been rarely reported so far. The seed vigor of Zhuliangyou 06 (ZLY06) increased and reached the highest level at 20 days after pollination (DAP), when seed moisture content had a lower value, which was maintained until final seed maturation. For Chunyou 84 (CY84), seed vigor, fresh and dry weight had relatively high values at 25 DAP, when seed moisture content reached the lowest value and changed slightly from 25 to 55 DAP. In both hybrid rice varieties, seed glume chlorophyll content declined rapidly from 10 to 30 DAP and remained at a very low level after 35 DAP. Starch content exhibited an increasing trend during seed maturation, while both soluble sugar content and amylase activity decreased significantly at the early stages of seed development. Moreover, correlation analyses showed that seed dry weight, starch content and superoxide dismutase activity were significantly positively correlated with seed vigor. In contrast, chlorophyll content, moisture content, soluble sugar, soluble protein, abscisic acid, gibberellin content, electrical conductivity, catalase and ascorbate peroxidase activities were significantly negatively correlated with seed vigor. Physiological and biochemical parameters were obviously more closely related with seed vigor than with seed germinability during seed development. Seed vigor could be better used as a comprehensive factor to predict the optimum seed harvest time. It is suggested that for ZLY06 seeds could be harvested as early as 20 DAP, whereas for CY84 the earliest optimum harvest time was 25 DAP. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Universal machine ''Shtrek'' and the tractor-lifter with pneumatic-equipment control. [Auxiliary multipurpose materials handling equipment

Energy Technology Data Exchange (ETDEWEB)

Bal' bert, B M; Borumenskiy, V A; Lishenko, A P; Mitchenko, G A

1982-01-01

The machine ''Shtrek'' is described. It makes it possible to mechanize over 20 auxiliary operations: loading-unloading operations: extraction of old and deformed timbering; dissmantling of obstructions; erection of different types of timbering; making and restoring of drainage channels; laying and straightening of a drift and its leveling; assembly and disassembly of pipelines and mine equipment, etc. Depending on the type of operation, the machine has the corresponding suspended equipment. The elementary variant has a limited area of application at mines of the central region of the Dunbass. Currently a pneumatic variant of the machine ''Shtrek'' has been developed. The electric motor and the starter of the pumping equipment of the machine have been replaced by a pneumatic motor and pneumatically controlled valve KTM-50. In this case there was significant reduction in the weight of the pumping equipment and in its overall dimensions; the electric drive of the hydraulic distributors for controlling the mechanisms were replaced by simpler pneumatic ones; the logical circuit of the control system was constructed on the USEPPA elements. A specialized tractor-lifter designed for moving suspended loads is described for auxiliary operations in the near-face zone of the preparatory drifts. The machine also lifts and lowers the boom, rotates the boom by 270/sup 0/ and additionally lifts and lowers the weight-lifting hook.

Sustainable harvest of waterbirds: a global review

DEFF Research Database (Denmark)

Kanstrup, Niels

ABSTRACT Waterbirds have a long tradition of being harvested in various ways. In many countries, the harvest takes place as a primary food source, but recreational hunting is also very popular. Various methods are used. Subsistence hunting of waterbirds has a history that dates back to the dawn...... and the degree of stability in local communities obtained through nature conservation. In many countries there is a long tradition of detailed wildlife harvest management including programmes for bag surveys and monitoring of harvest levels. In most countries, however, the management of waterbird harvests...

An Integrated Hybrid Energy Harvester for Autonomous Wireless Sensor Network Nodes

Directory of Open Access Journals (Sweden)

Mukter Zaman

2014-01-01

Full Text Available Profiling environmental parameter using a large number of spatially distributed wireless sensor network (WSN NODEs is an extensive illustration of advanced modern technologies, but high power requirement for WSN NODEs limits the widespread deployment of these technologies. Currently, WSN NODEs are extensively powered up using batteries, but the battery has limitation of lifetime, power density, and environmental concerns. To overcome this issue, energy harvester (EH is developed and presented in this paper. Solar-based EH has been identified as the most viable source of energy to be harvested for autonomous WSN NODEs. Besides, a novel chemical-based EH is reported as the potential secondary source for harvesting energy because of its uninterrupted availability. By integrating both solar-based EH and chemical-based EH, a hybrid energy harvester (HEH is developed to power up WSN NODEs. Experimental results from the real-time deployment shows that, besides supporting the daily operation of WSN NODE and Router, the developed HEH is capable of producing a surplus of 971 mA·hr equivalent energy to be stored inside the storage for NODE and 528.24 mA·hr equivalent energy for Router, which is significantly enough for perpetual operation of autonomous WSN NODEs used in environmental parameter profiling.

Adaptive harvest management for the Svalbard population of Pink-Footed Geese: 2014 progress summary

Science.gov (United States)

Johnson, Fred A.; Madsen, J.

2015-01-01

This document describes progress to date on the development of an adaptive harvest-management strategy for maintaining the Svalbard population of pink-footed geese (Anser brachyrhynchus) near their agreed target level (60 thousand) by providing for sustainable harvests in Norway and Denmark.  Specifically, this report provides an assessment of the most recent monitoring information and its implications for the harvest management strategy.

Piezoelectric energy harvesting through shear mode operation

International Nuclear Information System (INIS)

Malakooti, Mohammad H; Sodano, Henry A

2015-01-01

Piezoelectric materials are excellent candidates for use in energy harvesting applications due to their high electromechanical coupling properties that enable them to convert input mechanical energy into useful electric power. The electromechanical coupling coefficient of the piezoelectric material is one of the most significant parameters affecting energy conversion and is dependent on the piezoelectric mode of operation. In most piezoceramics, the d 15 piezoelectric shear coefficient is the highest coefficient compared to the commonly used axial and transverse modes that utilize the d 33 and the d 31 piezoelectric strain coefficients. However, complicated electroding methods and challenges in evaluating the performance of energy harvesting devices operating in the shear mode have slowed research in this area. The shear deformation of a piezoelectric layer can be induced in a vibrating sandwich beam with a piezoelectric core. Here, a model based on Timoshenko beam theory is developed to predict the electric power output from a cantilever piezoelectric sandwich beam under base excitations. It is shown that the energy harvester operating in the shear mode is able to generate ∼50% more power compared to the transverse mode for a numerical case study. Reduced models of both shear and transverse energy harvesters are obtained to determine the optimal load resistance in the system and perform an efficiency comparison between two models with fixed and adaptive resistances. (paper)

Light-Harvesting Organic Nanocrystals Capable of Photon Upconversion.

Science.gov (United States)

Li, Li; Zeng, Yi; Yu, Tianjun; Chen, Jinping; Yang, Guoqiang; Li, Yi

2017-11-23

Harvesting and converting low energy photons into higher ones through upconversion have great potential in solar energy conversion. A light-harvesting nanocrystal assembled from 9,10-distyrylanthracene and palladium(II) meso-tetraphenyltetrabenzoporphyrin as the acceptor and the sensitizer, respectively effects red-to-green upconversion under incoherent excitation of low power density. An upconversion quantum yield of 0.29±0.02 % is obtained upon excitation with 640 nm laser of 120 mW cm -2 . The well-organized packing of acceptor molecules with aggregation-induced emission in the nanocrystals dramatically reduces the nonradiative decay of the excited acceptor, benefits the triplet-triplet annihilation (TTA) upconversion and guides the consequent upconverted emission. This work provides a straightforward strategy to develop light-harvesting nanocrystals based on TTA upconversion, which is attractive for energy conversion and photonic applications. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mechanical harvesting of pumpkin seeds

OpenAIRE

Sito, Stjepan; Ivančan, Stjepan; Barković, Edi; Mucalo, Ana

2009-01-01

One of the key problems in production technology of pumpkin seed for oil production is mechanized harvesting and losses of seed during mechanical harvesting. The losses of pumpkin seed during mechanical harvesting at peripheral velocity of 1.57 m/s (optimally adjusted machine) were 4.4% for Gleisdorf species, 5.2% for Slovenska species and 7.8% for pumpkin with husk. The higher average losses of pumpkin seed with husk were caused by tight connection of seed and pumpkin fruit.

Maple Sugar Harvesting/Wild Rice Harvesting.

Science.gov (United States)

Minneapolis Public Schools, MN.

Comprised of two separate booklets, this resource unit assists elementary teachers in explaining how the Ojibwe people harvest maple sugar and wild rice. The first booklet explains the procedure of tapping the maple trees for sap, preparation for boiling the sap, and the three forms the sugar is made into (granulated, "molded," and…

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Broadband energy harvesting using acoustic black hole structural tailoring

International Nuclear Information System (INIS)

Zhao, Liuxian; Semperlotti, Fabio; Conlon, Stephen C

2014-01-01

This paper explores the concept of an acoustic black hole (ABH) as a main design framework for performing dynamic structural tailoring of mechanical systems for vibration energy harvesting applications. The ABH is an integral feature embedded in the host structure that allows for a smooth reduction of the phase velocity, theoretically approaching zero, while minimizing the reflected energy. This mechanism results in structural areas with high energy density that can be effectively exploited to develop enhanced vibration-based energy harvesting. Fully coupled electro-mechanical models of an ABH tapered structure with surface mounted piezo-transducers are developed to numerically simulate the response of the system to both steady state and transient excitations. The design performances are numerically evaluated using structural intensity data as well as the instantaneous voltage/power and energy output produced by the piezo-transducer network. Results show that the dynamically tailored structural design enables a drastic increase in the harvested energy as compared to traditional structures, both under steady state and transient excitation conditions. (papers)

Dielectric loss against piezoelectric power harvesting

Science.gov (United States)

Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

2014-09-01