NESDIS Blended Total Precipitable Water (TPW) Products

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The blended Total Precipitable Water (TPW) product is derived from multiple sensors/satellites. The Percentage of TPW normal (PCT), or TPW anomaly, shows the...

Demonstration of AIRS Total Ozone Products to Operations to Enhance User Readiness

Science.gov (United States)

Berndt, Emily; Zavodsky, Bradley; Jedlovec, Gary

2014-01-01

cyclogenesis and hurricane force wind events. Currently, forecasters at WPC/OPC are evaluating the Air Mass RGB imagery in conjunction with the AIRS total column ozone to aid forecasting cyclogenesis and high wind forecasts. One of the limitations of the total ozone product is that it is difficult for forecasters to determine whether elevated ozone concentrations are related to stratospheric air or climatologically high values of ozone in certain regions. To address this limitation, SPoRT created an AIRS ozone anomaly product which calculates the percent of normal ozone based on a global stratospheric ozone mean climatology. With the knowledge that ozone values 125 percent of normal and greater typically represent stratospheric air; the anomaly product can be used with the total column ozone product to confirm regions of stratospheric air on the Air Mass RGB. This presentation describes the generation of these products along with forecaster feedback concerning the use of the AIRS ozone products in conjunction with the Air Mass RGB product for the unique forecast challenges WPC/OPC face. Additionally examples of CrIS ozone and anomaly products will be shown to further demonstrate the utility and capability of JPSS in forecasting unique events.

Yeast strains designed for 2. generation bioethanol production. Final report

Energy Technology Data Exchange (ETDEWEB)

Roennow, B.

2013-04-15

The aim of the project was to develop a suitable fermentation organism for 2G bioethanol production that would efficiently ferment all of the sugars in lignocellulosic biomass into ethanol at a commercially viable rate (comparable to yeast based 1G ethanol production). More specifically, a yeast strain would be developed with the ability to ferment also the pentoses in lignocellulosic biomass and thereby increase the ethanol yield of the process by 30-45% with a profound positive effect on the total process economy. The project has succeeded in developing a new industrial yeast strain V1. The yeast strain can transform the difficult C5 sugars to ethanol from waste products such as straw and the like from the agricultural sector. The classic issues relating to industrial uses such as inhibitor and ethanol tolerance and high ethanol production is resolved satisfactorily. The potential of the use of the new strain for 2nd generation bioethanol production is that the ethanol yields increase by 30-45%. With the increased ethanol yield follows a marked improvement in the overall process economics. (LN)

Multiobjective genetic algorithm strategies for electricity production from generation IV nuclear technology

Energy Technology Data Exchange (ETDEWEB)

Gomez, Adrien; Pibouleau, Luc; Azzaro-Pantel, Catherine; Domenech, Serge [Laboratoire de Genie Chimique, 5 rue Paulin Talabot, 31700 Toulouse Cedex 1 (France); Latge, Christian [CEA Cadarache, DEN/DTN/DIR, Bat. 710, 13108 Saint Paul Lez Durance (France); Haubensack, David [CEA Cadarache, DEN/DER/SESI/LCSI, Bat. 212, 13108 Saint Paul Lez Durance (France)

2010-04-15

Development of a technico-economic optimization strategy of cogeneration systems of electricity/hydrogen, consists in finding an optimal efficiency of the generating cycle and heat delivery system, maximizing the energy production and minimizing the production costs. The first part of the paper is related to the development of a multiobjective optimization library (MULTIGEN) to tackle all types of problems arising from cogeneration. After a literature review for identifying the most efficient methods, the MULTIGEN library is described, and the innovative points are listed. A new stopping criterion, based on the stagnation of the Pareto front, may lead to significant decrease of computational times, particularly in the case of problems involving only integer variables. Two practical examples are presented in the last section. The former is devoted to a bicriteria optimization of both exergy destruction and total cost of the plant, for a generating cycle coupled with a Very High Temperature Reactor (VHTR). The second example consists in designing the heat exchanger of the generating turbomachine. Three criteria are optimized: the exchange surface, the exergy destruction and the number of exchange modules. (author)

Multiobjective genetic algorithm strategies for electricity production from generation IV nuclear technology

International Nuclear Information System (INIS)

Gomez, Adrien; Pibouleau, Luc; Azzaro-Pantel, Catherine; Domenech, Serge; Latge, Christian; Haubensack, David

2010-01-01

Development of a technico-economic optimization strategy of cogeneration systems of electricity/hydrogen, consists in finding an optimal efficiency of the generating cycle and heat delivery system, maximizing the energy production and minimizing the production costs. The first part of the paper is related to the development of a multiobjective optimization library (MULTIGEN) to tackle all types of problems arising from cogeneration. After a literature review for identifying the most efficient methods, the MULTIGEN library is described, and the innovative points are listed. A new stopping criterion, based on the stagnation of the Pareto front, may lead to significant decrease of computational times, particularly in the case of problems involving only integer variables. Two practical examples are presented in the last section. The former is devoted to a bicriteria optimization of both exergy destruction and total cost of the plant, for a generating cycle coupled with a Very High Temperature Reactor (VHTR). The second example consists in designing the heat exchanger of the generating turbomachine. Three criteria are optimized: the exchange surface, the exergy destruction and the number of exchange modules.

Exergetic life cycle assessment of cement production process with waste heat power generation

International Nuclear Information System (INIS)

Sui, Xiuwen; Zhang, Yun; Shao, Shuai; Zhang, Shushen

2014-01-01

Highlights: • Exergetic life cycle assessment was performed for the cement production process. • Each system’s efficiency before and after waste heat power generation was analyzed. • The waste heat power generation improved the efficiency of each production system. • It provided technical support for the implementation of energy-saving schemes. - Abstract: The cement industry is an industry that consumes a considerable quantity of resources and energy and has a very large influence on the efficient use of global resources and energy. In this study, exergetic life cycle assessment is performed for the cement production process, and the energy efficiency and exergy efficiency of each system before and after waste heat power generation is investigated. The study indicates that, before carrying out a waste heat power generation project, the objective energy efficiencies of the raw material preparation system, pulverized coal preparation system and rotary kiln system are 39.4%, 10.8% and 50.2%, respectively, and the objective exergy efficiencies are 4.5%, 1.4% and 33.7%, respectively; after carrying out a waste heat power generation project, the objective energy efficiencies are 45.8%, 15.5% and 55.1%, respectively, and the objective exergy efficiencies are 7.8%, 2.8% and 38.1%, respectively. The waste heat power generation project can recover 3.7% of the total input exergy of a rotary kiln system and improve the objective exergy efficiencies of the above three systems. The study can identify degree of resource and energy utilization and the energy-saving effect of a waste heat power generation project on each system, and provide technical support for managers in the implementation of energy-saving schemes

The GOES-R Product Generation Architecture

Science.gov (United States)

Dittberner, G. J.; Kalluri, S.; Hansen, D.; Weiner, A.; Tarpley, A.; Marley, S.

2011-12-01

The GOES-R system will substantially improve users' ability to succeed in their work by providing data with significantly enhanced instruments, higher resolution, much shorter relook times, and an increased number and diversity of products. The Product Generation architecture is designed to provide the computer and memory resources necessary to achieve the necessary latency and availability for these products. Over time, new and updated algorithms are expected to be added and old ones removed as science advances and new products are developed. The GOES-R GS architecture is being planned to maintain functionality so that when such changes are implemented, operational product generation will continue without interruption. The primary parts of the PG infrastructure are the Service Based Architecture (SBA) and the Data Fabric (DF). SBA is the middleware that encapsulates and manages science algorithms that generate products. It is divided into three parts, the Executive, which manages and configures the algorithm as a service, the Dispatcher, which provides data to the algorithm, and the Strategy, which determines when the algorithm can execute with the available data. SBA is a distributed architecture, with services connected to each other over a compute grid and is highly scalable. This plug-and-play architecture allows algorithms to be added, removed, or updated without affecting any other services or software currently running and producing data. Algorithms require product data from other algorithms, so a scalable and reliable messaging is necessary. The SBA uses the DF to provide this data communication layer between algorithms. The DF provides an abstract interface over a distributed and persistent multi-layered storage system (e.g., memory based caching above disk-based storage) and an event management system that allows event-driven algorithm services to know when instrument data are available and where they reside. Together, the SBA and the DF provide a

Total rewards strategy for a multi-generational workforce in a financial institution

Directory of Open Access Journals (Sweden)

Mark Bussin

2014-11-01

Research purpose: This study investigated whether perceptions of reward strategy differed across generations in a large financial institution in South Africa. This context was specifically chosen due to the significant competition to attract and retain staff that exists in the financial sector. To contribute to the practical challenges of reward implementation, the study investigated whether specific reward preferences associated with generation exist, and whether offering rewards based on these preferences would successfully attract and retain staff. Motivation for study: South African businesses are competing for skilled staff and rely heavily on a total reward strategy to compensate all generations of employees. Given the financial incentives to retain and attract the most effective staff, it is essential that reward strategies meet their objectives. All factors impacting the efficacy of reward strategies should be considered, including the impact of generational differences in preference. This is of relevance not only to the financial industry, but to all companies that employ staff across a variety of generations. Research design, approach and method: A quantitative survey design was used. A total of 6316 employees from a financial firm completed a survey investigating their experiences and perceptions of reward strategies. Statistically significant differences across different generations and reward preferences were considered. Main findings: Significant differences in reward preferences were found across generational cohorts. This supports international literature. Practical/managerial implications: The results indicate that there is an opportunity for businesses and managers to link components of the total reward strategy to specific generations in the workforce by offering a wider variety of reward options to employees. Employee perceptions indicate a willingness to have reward strategies tailored to their needs and to have a greater say in their reward

Production function application attempt in electricity generation forecasting

International Nuclear Information System (INIS)

Kamrat, W.; Augusiak, A.

1996-01-01

A modified Cobb-Douglas production function is applied to evaluate level of electricity generation for medium and long term prognosis (up to 2010) in an easy and simple way. The test calculations have been done for hard coal fired power plants, based on generation data supplied in Main Statistical Office of Poland publications.The model of electricity generation is defined using data on capital of a typical productivity power plant and its employment for time series 1980-90. The test calculation results based on the parameters of Rosenbroock's optimization procedure of electricity generation model are presented. The method described is distinguished for its high accuracy as compared to classical methods despite the relatively short time series. It is suitable for studies in electricity generation policy . 1 tab

A moist air condensing device for sustainable energy production and water generation

International Nuclear Information System (INIS)

Ming, Tingzhen; Gong, Tingrui; Richter, Renaud K. de; Wu, Yongjia; Liu, Wei

2017-01-01

Highlights: • A novel device based upon a SCPP system is proposed for electricity production and water generation. • The collector is replaced by black tubes around the chimney. • The overall performance of SCPP for energy production and water generation was analyzed. • The system total energy efficiency of a SCPP with a height of 3000 m can be nearly 7%. - Abstract: A solar chimney power plant (SCPP) is not only a solar thermal application system to achieve output power, but also a device extracting freshwater from the humid air. In this article, we proposed a SCPP with collector being replaced by black tubes around the chimney to warm water and air. The overall performance of SCPP was analyzed by using a one-dimensional compressible fluid transfer model to calculate the system characteristic parameters, such as chimney inlet air velocity, the condensation level, amount of condensed water, output power, and efficiency. It was found that increasing the chimney inlet air temperature is an efficient way to increase chimney inlet air velocity and wind turbine output power. The operating conditions, such as air temperature and air relative humidity, have significant influence on the condensation level. For water generation, chimney height is the most decisive factor, the mass flow rate of condensed water decreases with increasing wind turbine pressure drop. To achieve the optimum peak output power by wind turbine, we should set the pressure drop factor as about 0.7. In addition, increasing chimney height is also an efficient way to improve the SCPP efficiency. Under ideal conditions, the system total efficiency of a SCPP with a height of 3000 m can be up to nearly 7%.

Wind Generators and Market Power

DEFF Research Database (Denmark)

Misir, Nihat

price thresholds are significantly higher when the monopolist at the peakload level owns both types of generators. Furthermore, when producing electricity with the peakload generator, the monopolist can avoid facing prices below marginal cost by owning a certain share of the wind generators.......Electricity production from wind generators holds significant importance in European Union’s 20% renewable energy target by 2020. In this paper, I show that ownership of wind generators affects market outcomes by using both a Cournot oligopoly model and a real options model. In the Cournot...... oligopoly model, ownership of the wind generators by owners of fossil-fueled (peakload) generators decreases total peakload production and increases the market price. These effects increase with total wind generation and aggregate wind generator ownership. In the real options model, start up and shut down...

NOAA NEXt-Generation RADar (NEXRAD) Products

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of Level III weather radar products collected from Next-Generation Radar (NEXRAD) stations located in the contiguous United States, Alaska,...

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

Total Factor Productivity Convergence in German States Since Reunification

DEFF Research Database (Denmark)

Burda, Michael C.; Severgnini, Battista

2018-01-01

A quarter-century after reunification, labor productivity in the states of eastern Germany continues to lag systematically behind the West. Persistent gaps in total factor productivity (TFP) are the proximate cause; conventional and capital-free measurements confirm a sharp slowdown in TFP growth...... of managers, low startup intensity and the distribution of firm size in the East rather than R&D activities....

Dynamics of Total Microcystin LR Concentration in Three Subtropical Hydroelectric Generation Reservoirs in Uruguay, South America.

Science.gov (United States)

González-Piana, Mauricio; Fabián, Daniel; Piccardo, Andrea; Chalar, Guillermo

2017-10-01

This study analyzed the temporal dynamics of total microcystin LR concentrations between the years of 2012 and 2015 in the Bonete, Baygorria and Palmar hydroelectric generation reservoirs in the central region of the Negro River, Uruguay. The three reservoirs showed differents total microcystin LR concentration, with no significant differences among them. Over 20 sampling dates, the three reservoirs exhibited total microcystin LR concentrations on eight occasions that corresponded to a slight to moderate human health risk according to WHO guideline values for recreational waters. By determining the concentration of microcystin LR in cyanobacterial biomass, we identified cyanobacterial populations that occurred over time with varying degrees of toxin production (maximal 85.4 µg/mm 3 ). The microcystin LR concentration in Bonete was positively correlated with temperature (r = 0.587) and cyanobacterial biomass (r = 0.736), in Baygorria with cyanobacterial biomass (r = 0.521), and in Palmar with temperature (r = 0.500) and negatively correlated with ammonia (r = -0.492). Action is needed to reduce the presence of toxic cyanobacteria in these systems. A decrease in the use of agrochemicals and management changes in the reservoir basins could be successful long-term measures.

Health information technology vendor selection strategies and total factor productivity.

Science.gov (United States)

Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

2013-01-01

The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

Energy Technology Data Exchange (ETDEWEB)

González Pericot, N., E-mail: natalia.gpericot@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Villoria Sáez, P., E-mail: paola.villoria@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Del Río Merino, M., E-mail: mercedes.delrio@upm.es [Escuela Técnica Superior de Edificación, Universidad Politécnica de Madrid, Calle Juan de Herrera n°6, 28040 Madrid (Spain); Liébana Carrasco, O., E-mail: oscar.liebana@uem.es [Escuela de Arquitectura, Universidad Europea de Madrid, Calle Tajo s/n, 28670 Villaviciosa de Odón (Spain)

2014-11-15

Highlights: • On-site segregation level: 1.80%; training and motivation strategies were not effective. • 70% Cardboard waste: from switches and sockets during the building services stage. • 40% Plastic waste: generated during structures and partition works due to palletizing. • >50% Wood packaging waste, basically pallets, generated during the envelope works. - Abstract: The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites.

Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

International Nuclear Information System (INIS)

González Pericot, N.; Villoria Sáez, P.; Del Río Merino, M.; Liébana Carrasco, O.

2014-01-01

Highlights: • On-site segregation level: 1.80%; training and motivation strategies were not effective. • 70% Cardboard waste: from switches and sockets during the building services stage. • 40% Plastic waste: generated during structures and partition works due to palletizing. • >50% Wood packaging waste, basically pallets, generated during the envelope works. - Abstract: The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites

Milk production potential of two ryegrass cultivars with different total ...

African Journals Online (AJOL)

The aim of the study was to compare a new Italian ryegrass (Lolium multiflorum) cultivar (Enhancer), bred to contain a high total non-structural carbohydrate content, with the cultivar, Dargle, in terms of dry matter (DM) production, nutritional value, carrying capacity and milk production. The ryegrass cultivars were sown (25 ...

Energy assessment of second generation (2G) ethanol production from wheat straw in Indian scenario.

Science.gov (United States)

Mishra, Archana; Kumar, Akash; Ghosh, Sanjoy

2018-03-01

Impact of second-generation ethanol (2G) use in transportation sector mainly depends upon energy efficiency of entire production process. The objective of present study was to determine energy efficiency of a potential lignocellulosic feedstock; wheat straw and its conversion into cellulosic ethanol in Indian scenario. Energy efficiency was determined by calculating Net energy ratio (NER), i.e. ratio of output energy obtained by ethanol and input energy used in ethanol production. Energy consumption and generation at each step is calculated briefly (11,837.35 MJ/ha during Indian dwarf irrigated variety of wheat crop production and 7.1148 MJ/kg straw during ethanol production stage). Total energy consumption is calculated as 8.2988 MJ/kg straw whereas energy generation from ethanol is 15.082 MJ/kg straw; resulting into NER > 1. Major portion of agricultural energy input is contributed by diesel and fertilisers whereas refining process of wheat straw feedstock to ethanol and by-products require mainly in the form of steam and electricity. On an average, 1671.8 kg water free ethanol, 930 kg lignin rich biomass (for combustion), and 561 kg C5-molasses (for fodder) per hectare are produced. Findings of this study, net energy ratio (1.81) and figure of merit (14.8028 MJ/nil kg carbon) proves wheat straw as highest energy efficient lignocellulosic feedstock for the country.

Does new product growth accelerate across technology generations?

NARCIS (Netherlands)

S. Stremersch (Stefan); E. Muller (Erwin); R. Peres (Renana)

2010-01-01

textabstractThe academic literature on the growth acceleration of new products presents a paradox. On the one hand, the diffusion literature concludes that more recently introduced products show faster diffusion than older ones. On the other hand, technology generation literature argues that growth

Total disintegration of three-nucleon nuclei in charged-pion photo-production

International Nuclear Information System (INIS)

Dzhibuti, R.I.; Kezerashvili, R.Y.

1984-01-01

The total disintegration of three-nucleon nuclei in charged-pion photo-production is studied within the framework of the microscopic approach based on the method of hyperspherical functions. The initial and final nuclear states are described using the same NN potentials. The differential and total cross sections are calculated using various NN potentials. It is shown that the cross sections are sensitive to the form of the NN interaction and to the final-state interaction of the three nucleons. It is found that the cross section for π - meson production is systematically larger than the cross section for π + meson production. The importance of an experimental investigation of these reactions is shown

Non-unique Product Groups on Two Generators

OpenAIRE

Carter, William Paul

2007-01-01

The main purpose of this paper is to better understand groups that do not have the unique product property. In particular, the goal is to better understand Promislow's example, G, of such a group. In doing so, we will develop methods for generating examples of other sets that do not have the unique product property. With these methods we can show that there exists other distinct 14 element, square, non-unique product sets in G that are not inversions or translations. Also, this paper answers ...

European Legal Developments in Product Liability and Product Safety and the Total Quality Management Approach

NARCIS (Netherlands)

Brack, Antoni; Gieskes, J.F.B.

1990-01-01

The purpose of this paper is to show that Product Liability (PL) and Product Safety (PS) are relevant categories in terms of the Total Quality Management literature. From a societal point of view PL and PS are two sides of a coin. The effects of the PL and PS regulation on companies are described

Regional economic development in Europe : the role of total factor productivity

NARCIS (Netherlands)

Beugelsdijk, Sjoerd; Klasing, Mariko J.; Milionis, Petros

2018-01-01

Regional economic development in Europe: the role of total factor productivity. Regional Studies. This paper documents the fact that the large and persistent differences in economic development across subnational regions in European Union countries can largely be attributed to differences in total

R&D, Marketing, and the Success of Next-Generation Products

OpenAIRE

Elie Ofek; Miklos Sarvary

2003-01-01

This paper studies dynamic competition in markets characterized by the introduction of technologically advanced next-generation products. Firms invest in new product effort in an attempt to attain industry leadership, thus securing high profits and benefiting from advantages relevant for the success of future product generations. The analysis reveals that when the current leader possesses higher research and development (R&D) competence, it tends to investin R&D than rivals and to retain its ...

Corrosion products in power generating systems

International Nuclear Information System (INIS)

Lister, D.H.

1980-06-01

The important mechanisms of corrosion and corrosion product movement and fouling in the heat transport systems of thermal electric generating stations are reviewed. Oil- and coal-fired boilers are considered, along with nuclear power systems - both direct and indirect cycle. Thus, the fireside and waterside in conventional plants, and the primary coolant and steam-raising circuits in water-cooled reactors, are discussed. Corrosion products in organic- and liquid-metal-cooled reactors also are shown to cause problems if not controlled, while their beneficial effects on the cooling water side of condensers are described. (auth)

Availability of steam generator against thermal disturbance of hydrogen production system coupled to HTGR

International Nuclear Information System (INIS)

Shibata, Taiju; Nishihara, Tetsuo; Hada, Kazuhiko; Shiozawa, Shusaku

1996-01-01

One of the safety issues to couple a hydrogen production system to an HTGR is how the reactor coolability can be maintained against anticipated abnormal reduction of heat removal (thermal disturbance) of the hydrogen production system. Since such a thermal disturbance is thought to frequently occur, it is desired against the thermal disturbance to keep reactor coolability by means other than reactor scram. Also, it is thought that the development of a passive cooling system for such a thermal disturbance will be necessary from a public acceptance point of view in a future HTGR-hydrogen production system. We propose a SG as the passive cooling system which can keep the reactor coolability during a thermal disturbance of a hydrogen production system. This paper describes the proposed steam generator (SG) for the HTGR-hydrogen production system and a result of transient thermal-hydraulic analysis of the total system, showing availability of the SG against a thermal disturbance of the hydrogen production system in case of the HTTR-steam reforming hydrogen production system. (author)

Trends in hospital labor and total factor productivity, 1981-86

Science.gov (United States)

Cromwell, Jerry; Pope, Gregory C.

1989-01-01

The per-case payment rates of Medicare's prospective payment system are annually updated. As one element of the update factor, Congress required consideration of changes in hospital productivity. In this article, calculations of annual changes in labor and total factor productivity during 1981-86 of hospitals eligible for prospective payment are presented using several output and input variants. Generally, productivity has declined since 1980, although the rates of decline have slowed since prospective payment implementation. According to the series of analyses most relevant for policy, significant hospital productivity gains occurred during 1983-86. This may justify a lower update factor. PMID:10313278

Engineering cyanobacteria to generate high-value products.

Science.gov (United States)

Ducat, Daniel C; Way, Jeffrey C; Silver, Pamela A

2011-02-01

Although many microorganisms have been used for the bioindustrial generation of valuable metabolites, the productive potential of cyanobacterial species has remained largely unexplored. Cyanobacteria possess several advantages as organisms for bioindustrial processes, including simple input requirements, tolerance of marginal agricultural environments, rapid genetics, and carbon-neutral applications that could be leveraged to address global climate change concerns. Here, we review recent research involving the engineering of cyanobacterial species for the production of valuable bioindustrial compounds, including natural cyanobacterial products (e.g. sugars and isoprene), biofuels (e.g. alcohols, alkanes and hydrogen), and other commodity chemicals. Biological and economic obstacles to scaled cyanobacterial production are highlighted, and methods for increasing cyanobacterial production efficiencies are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

JWST Associations overview: automated generation of combined products

Science.gov (United States)

Alexov, Anastasia; Swade, Daryl; Bushouse, Howard; Diaz, Rosa; Eisenhamer, Jonathan; Hack, Warren; Kyprianou, Mark; Levay, Karen; Rahmani, Christopher; Swam, Mike; Valenti, Jeff

2018-01-01

We are presenting the design of the James Webb Space Telescope (JWST) Data Management System (DMS) automated processing of Associations. An Association captures the relationship between exposures and higher level data products, such as combined mosaics created from dithered and tiled observations. The astronomer’s intent is captured within the Proposal Planning System (PPS) and provided to DMS as candidate associations. These candidates are converted into Association Pools and Association Generator Tables that serve as input to automated processing which create the combined data products. Association Pools are generated to capture a list of exposures that could potentially form associations and provide relevant information about those exposures. The Association Generator using definitions on groupings creates one or more Association Tables from a single input Association Pool. Each Association Table defines a set of exposures to be combined and the ruleset of the combination to be performed; the calibration software creates Associated data products based on these input tables. The initial design produces automated Associations within a proposal. Additionally this JWST overall design is conducive to eventually produce Associations for observations from multiple proposals, similar to the Hubble Legacy Archive (HLA).

Production of 99Tc generators with automatic elution

International Nuclear Information System (INIS)

Mengatti, J.; Yanagawa, S.T.I.; Mazzarro, E.; Gasiglia, H.T.; Rela, P.R.; Silva, C.P.G. da; Pereira, N.P.S. de.

1983-10-01

The improvements performed on the routine production of sup(99m) Tc-generators at the Instituto de Pesquisas Energeticas e Nucleares-CNEN/SP, are described. The old model generators (manual elution of sup(99m) Tc) were substituted by automatically eluted generators (Vacuum system). The alumina column, elution system and acessories were modified; the elution time was reduced from 60 to 20-30 seconds. The new generators give 80-90% elution yields using six mililiters of sodium chloride 0,9% as sup(99m) Tc eluant instead of the 10 mililiters necessary to eluate the old generators. So, the radioactive concentrations are now 70% higher. The radioactive, radiochemical, chemical and microbiological criteria were examinated for sup(99m) Tc solutions. Like old generators, automatic generators were considered safe for medical purpose. (Author) [pt

Total internal reflection second-harmonic generation: probing the alkane water interface

International Nuclear Information System (INIS)

Conboy, J.C.; Daschbach, J.L.; Richmond, G.L.

1994-01-01

Total internal reflection Second-Harmonic Generation (SHG) has been used to study a series of neat n-alkane/water interfaces. Polarization and incident angular-dependent measurements of the SH response show good agreement with theoretical predictions. Analysis of the incident and polarization angular-dependent SH response allows for determination of the nonlinear optical properties of molecules comprising the interfacial region. Based on Kleinman symmetry, the measured surface nonlinear susceptibilities suggest a high degree of interfacial order for octane and decane with less order indicated by the odd carbon n-alkanes examined, heptane and nonane. The SH response in reflection and transmission has been measured under a Total Internal Reflection (TIR) of the fundamental. The measured nonlinear susceptibilities in each case are found to be identical. (orig.)

Pathways to agility in the production of neutron generators

Energy Technology Data Exchange (ETDEWEB)

Stoltz, R.E. [Sandia National Labs., Livermore, CA (United States); Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W. [Sandia National Labs., Albuquerque, NM (United States)

1994-02-01

This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

Relativistic total and differential cross section proton--proton electron--positron pair production calculation

International Nuclear Information System (INIS)

Rubinstein, J.E.

1976-01-01

Circle Feynman diagrams for a specific permutation of variables along with their corresponding algebraic expressions are presented to evaluate [H] 2 for proton-proton electron-positron pair production. A Monte Carlo integration technique is introduced and is used to set up the multiple integral expression for the total pair production cross section. The technique is first applied to the Compton scattering problem and then to an arbitrary multiple integral. The relativistic total cross section for proton-proton electron-positron pair production was calculated for eight different values of incident proton energy. A variety of differential cross sections were calculated for the above energies. Angular differential cross section distributions are presented for the electron, positron, and proton. Invariant mass differential cross section distributions are done both with and without the presence of [H] 2 . Both WGHT and log 10 (TOTAL) distributions were also obtained. The general behavioral trends of the total and differential cross sections for proton-proton electron-positron pair production are presented. The range of validity for this calculation is from 0 to about 200 MeV

Total Factor Productivity Convergence in Africa: Panel Unit Root ...

African Journals Online (AJOL)

The study tested absolute and conditional convergence of Total Factor Productivity in Africa using a sample of 23 countries and TFP data covering the period between 1960 and 2003 while deploying the panel unit root methodology. Countries that have experienced sustained economic growth rate are found to have ...

COMPARISON OF PRODUCTION PARAMETERS BETWEEN THE FIRST GENERATION OF A-LINE IMPORTED AND BRED GILTS ON THE NUCLEUS FARM VELIKA BRANJEVINA

Directory of Open Access Journals (Sweden)

Dragica Dubravac

2013-06-01

Full Text Available Comparison of productive parameters of two analyzed groups (the first generation of imported gilts and the gilts born on the domestic farm was conducted on a nucleus farm that imported the gilt lines from the TOPIGS breeding program. For the purposes of the nucleus pig farm, TOPIGS gilts were imported from Netherlands. The nucleus farm where the analysis of the two groups’ productive parameters was conducted imported the ancestral and grandfather lines to produce the parenting generation TOPIGS 40 sows which are bred with a Pietrain line of boars. The TOPIGS 40 sow is an animal based on A-line and B-line characterized by high fertility rate, excellent maternal characteristics, good capacity for growth, and quality meaty body. The analysis of productive parameters of the two observed groups of gilts (the first generation of 105 imported gilts and 88 gilts born on the domestic farm resulted in significantly higher number of total born, born alive and weaned piglets after the first farrowing (P<0.001 as well as significantly higher number of total born and born alive piglets at third farrowing (P<0.05. The results of the observed qualities confirm the fact that, apart from the unquestionable genetic potential, other factors such as adaptation, accommodation conditions, microclimate, nutrition, and management have a significant effect on the increase of production results.

Measurement framework for product service system performance of generator set distributors

Science.gov (United States)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

GPS-TEC Observation of Gravity Waves Generated in the Ionosphere During 21 August 2017 Total Solar Eclipse

Science.gov (United States)

Nayak, Chinmaya; Yiǧit, Erdal

2018-01-01

The present work investigates ionospheric effects of the 21 August 2017 total solar eclipse, particularly targeting eclipse-generated gravity waves in the ionosphere. Ionospheric total electron content (TEC) derived from Global Positioning System (GPS) data obtained from a number of stations located both along and across the path of eclipse totality has been utilized for this purpose. Distinct gravity wave-like signatures with wave periods around 20-90 min (with dominant peak at 25-30 min wave period) have been observed at all locations both in the path of totality and away from it. The observed gravity waves are more intense at locations closer to the path of totality, and the wave amplitudes decrease gradually with increasing distance from the path of totality. Our result highlights the manifestation of eclipse-generated waves in the variability of the terrestrial ionosphere.

Estimation of waste generated by the production of rainbow trout in Lake Tota, Colombia

Directory of Open Access Journals (Sweden)

Nixon Hernán Torres-Barrera

2017-05-01

Full Text Available In this study, the total waste from the production of rainbow trout, Oncorhynchus mykiss ( Wa l b a u m (Salmoniformes: Salmonidae in Lake Tota freshwater ecosystem, located in the Department of Boyacá, Colombia, and its potential impact on the lake was estimated. This economic activity has been carried out intensively since 2005 using submerged cages in the lake. With data obtained from the National Authority for Aquaculture and Fisheries (Aunap, the Autonomous Regional Corporation of Boyacá (Corpoboyacá, and the Chamber of Commerce of Sogamoso, fish farmers, their geographical location on the lake, production by these farms were identified, and with this information the amount of waste produced, including the amounts of nitrogen and phosphorus generated in this process was calculated. The results indicate that the lake is polluted due to intensive trout production. It is recommended to improve or modify trout production methods that will minimize water pollution.

Computationally-generated nuclear forensic characteristics of early production reactors with an emphasis on sensitivity and uncertainty

International Nuclear Information System (INIS)

Redd, Evan M.; Sjoden, Glenn; Erickson, Anna

2017-01-01

Highlights: •X-10 reactor is used as a case study for nuclear forensic signatures. •S/U analysis is conducted to derive statistically relevant markers. •Computationally-generated signatures aid with proliferation pathway identification. •Highest uncertainty in total plutonium production originates from 238 Pu and 242 Pu. -- Abstract: With nuclear technology and analysis advancements, site access restrictions, and ban on nuclear testing, computationally-generated nuclear forensic signatures are becoming more important in gaining knowledge to a reclusive country’s weapon material production capabilities. In particular, graphite-moderated reactors provide an appropriate case study for isotopics relevant in Pu production in a clandestine nuclear program due to the ease of design and low thermal output. We study the production characteristics of the X-10 reactor with a goal to develop statistically-relevant nuclear forensic signatures from early Pu production. In X-10 reactor, a flat flux gradient and low burnup produce exceptionally pure Pu as evident by the 240 Pu/ 239 Pu ratio. However, these design aspects also make determining reactor zone attribution, done with the 242 Pu/ 240 Pu ratio, uncertain. Alternatively, the same ratios produce statistically differentiable results between Manhattan Project and post-Manhattan Project reactor configurations, allowing for attribution conclusions.

Hydrolysis products generated by lipoprotein lipase and endothelial lipase differentially impact THP-1 macrophage cell signalling pathways.

Science.gov (United States)

Essaji, Yasmin; Yang, Yanbo; Albert, Carolyn J; Ford, David A; Brown, Robert J

2013-08-01

Macrophages express lipoprotein lipase (LPL) and endothelial lipase (EL) within atherosclerotic plaques; however, little is known about how lipoprotein hydrolysis products generated by these lipases might affect macrophage cell signalling pathways. We hypothesized that hydrolysis products affect macrophage cell signalling pathways associated with atherosclerosis. To test our hypothesis, we incubated differentiated THP-1 macrophages with products from total lipoprotein hydrolysis by recombinant LPL or EL. Using antibody arrays, we found that the phosphorylation of six receptor tyrosine kinases and three signalling nodes--most associated with atherosclerotic processes--was increased by LPL derived hydrolysis products. EL derived hydrolysis products only increased the phosphorylation of tropomyosin-related kinase A, which is also implicated in playing a role in atherosclerosis. Using electrospray ionization-mass spectrometry, we identified the species of triacylglycerols and phosphatidylcholines that were hydrolyzed by LPL and EL, and we identified the fatty acids liberated by gas chromatography-mass spectrometry. To determine if the total liberated fatty acids influenced signalling pathways, we incubated differentiated THP-1 macrophages with a mixture of the fatty acids that matched the concentrations of liberated fatty acids from total lipoproteins by LPL, and we subjected cell lysates to antibody array analyses. The analyses showed that only the phosphorylation of Akt was significantly increased in response to fatty acid treatment. Overall, our study shows that macrophages display potentially pro-atherogenic signalling responses following acute treatments with LPL and EL lipoprotein hydrolysis products.

NPOESS Interface Data Processing Segment Product Generation

Science.gov (United States)

Grant, K. D.

2009-12-01

The National Oceanic and Atmospheric Administration (NOAA), Department of Defense (DoD), and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation weather and environmental satellite system; the National Polar-orbiting Operational Environmental Satellite System (NPOESS). NPOESS replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the Defense Meteorological Satellite Program (DMSP) managed by the DoD. The NPOESS satellites carry a suite of sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The NPOESS design allows centralized mission management and delivers high quality environmental products to military, civil and scientific users. The ground data processing segment for NPOESS is the Interface Data Processing Segment (IDPS), developed by Raytheon Intelligence and Information Systems. The IDPS processes NPOESS satellite data to provide environmental data products to NOAA and DoD processing centers operated by the United States government. The IDPS will process environmental data products beginning with the NPOESS Preparatory Project (NPP) and continuing through the lifetime of the NPOESS system. Within the overall NPOESS processing environment, the IDPS must process a data volume nearly 1000 times the size of current systems -- in one-quarter of the time. Further, it must support the calibration, validation, and data quality improvement initiatives of the NPOESS program to ensure the production of atmospheric and environmental products that meet strict requirements for accuracy and precision. This paper will describe the architecture approach that is necessary to meet these challenging, and seemingly exclusive, NPOESS IDPS design requirements, with a focus on the processing relationships required to generate the NPP products.

Software module for geometric product modeling and NC tool path generation

International Nuclear Information System (INIS)

Sidorenko, Sofija; Dukovski, Vladimir

2003-01-01

The intelligent CAD/CAM system named VIRTUAL MANUFACTURE is created. It is consisted of four intelligent software modules: the module for virtual NC machine creation, the module for geometric product modeling and automatic NC path generation, the module for virtual NC machining and the module for virtual product evaluation. In this paper the second intelligent software module is presented. This module enables feature-based product modeling carried out via automatic saving of the designed product geometric features as knowledge data. The knowledge data are afterwards applied for automatic NC program generation for the designed product NC machining. (Author)

Suitability Evaluation for Products Generation from Multisource Remote Sensing Data

Directory of Open Access Journals (Sweden)

Jining Yan

2016-12-01

Full Text Available With the arrival of the big data era in Earth observation, the remote sensing communities have accumulated a large amount of invaluable and irreplaceable data for global monitoring. These massive remote sensing data have enabled large-area and long-term series Earth observation, and have, in particular, made standard, automated product generation more popular. However, there is more than one type of data selection for producing a certain remote sensing product; no single remote sensor can cover such a large area at one time. Therefore, we should automatically select the best data source from redundant multisource remote sensing data, or select substitute data if data is lacking, during the generation of remote sensing products. However, the current data selection strategy mainly adopts the empirical model, and has a lack of theoretical support and quantitative analysis. Hence, comprehensively considering the spectral characteristics of ground objects and spectra differences of each remote sensor, by means of spectrum simulation and correlation analysis, we propose a suitability evaluation model for product generation. The model will enable us to obtain the Production Suitability Index (PSI of each remote sensing data. In order to validate the proposed model, two typical value-added information products, NDVI and NDWI, and two similar or complementary remote sensors, Landsat-OLI and HJ1A-CCD1, were chosen, and the verification experiments were performed. Through qualitative and quantitative analysis, the experimental results were consistent with our model calculation results, and strongly proved the validity of the suitability evaluation model. The proposed production suitability evaluation model could assist with standard, automated, serialized product generation. It will play an important role in one-station, value-added information services during the big data era of Earth observation.

IMPLEMENTASI TOTAL PRODUCTIVE MAINTENANCE DI DEPARTEMEN NON JAHIT PT. KERTA RAJASA RAYA

Directory of Open Access Journals (Sweden)

Ronald E. Stok

2001-01-01

Full Text Available The effectivity improvement of production facility in factory is not only on facility manitenance but also on human resources. Total Productive Maintenance (TPM gives an optimal solution to effectivity improvement. A case study of TPM implementation have done in non sewing department of PT Kerta Rajasa Raya. Abstract in Bahasa Indonesia : Peningkatan efektivitas dari fasilitas produksi di suatu perusahaan bukan hanya terbatas pada perawatan fasilitas kerja saja tetapi juga sumber daya manusia. Total Productive Maintenance (TPM memberikan suatu solusi optimal terhadap peningkatan efektivitas dengan melibatkan semua sumber daya manusia yang bertanggung jawab terhadap fasilitas produksi. Suatu studi kasus terhadap pengimplementasian TPM dilakukan di departemen non jahit PT. Kerta Rajasa Raya. Kata kunci : TPM, MTTF, Autonomous Maintenance.

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Directory of Open Access Journals (Sweden)

Feng Tao

2012-01-01

Full Text Available The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X H

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X. H.

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity. PMID:23365517

Towards total productive maintenance in the Eastern European mining industry

Energy Technology Data Exchange (ETDEWEB)

Buck, J.D. [Kepner-Tregoe (United Kingdom) Ltd., Windsor

1999-08-01

An European Union consultancy project was undertaken to install a `best-in-class` maintenance system for the lignite mines of Romania. The project, funded by PHARE, started with a critical analysis of the maintenance and repair systems of equipment in both the open-pit and underground mines operated by RALO (Regia Autonoma a Lignitului Octenia). This study paved the way for the introduction of a computerised maintenance system and the inception of a planned preventative maintenance scheme. A development strategy leading by a structural methodology towards predictive maintenance and total productive maintenance was drawn up and attention was given to multi-skilling, training and further facilitating activities to enable the success of the total productive maintenance strategy. An abridged version of the paper was presented at MAINTE 97, held in Birmingham, UK in 1997. 5 refs., 5 figs., 1 tab.

The impact of embedded total productive maintenance with six ...

African Journals Online (AJOL)

The purpose of the work presented in this paper is to capture the current state of Six Sigma and Total Productive Maintenance (TPM) as well as to propose the embedded approach of Six Sigma and TPM on improving supply chain performance. The approach to this paper is to answer the questions such as “how does TPM ...

NOAA Next Generation Radar (NEXRAD) Level 3 Products

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of Level 3 weather radar products collected from Next-Generation Radar (NEXRAD) stations located in the contiguous United States, Alaska,...

Total and inorganic arsenic in foods of the first Hong Kong total diet study.

Science.gov (United States)

Chung, Stephen Wai-cheung; Lam, Chi-ho; Chan, Benny Tsz-pun

2014-04-01

Arsenic (As) is a metalloid that occurs in different inorganic and organic forms, which are found in the environment from both natural occurrence and anthropogenic activity. The inorganic forms of As (iAs) are more toxic as compared with the organic As, but so far most of the occurrence data in food collected in the framework of official food control are still reported as total As without differentiating the various As species. In this paper, total As and iAs contents of 600 total diet study (TDS) samples, subdivided into 15 different food groups, were quantified by high-resolution inductively coupled plasma mass spectrometry (HR-ICP/MS) and hydride generation (HG) ICP/MS respectively. The method detection limits for both total As and iAs were 3 μg As kg(-1). As the samples were prepared for TDS, food items were purchased directly from the market or prepared as for normal consumption, i.e. table ready, in the manner most representative of and consistent with cultural habits in Hong Kong as far as practicable. The highest total As and iAs content were found in 'fish, seafood and their products' and 'vegetables and their products' respectively. Besides, this paper also presents the ratios of iAs and total As content in different ready-to-eat food items. The highest ratio of iAs to total As was found in 'vegetables and their products'. It is likely that iAs in vegetables maintained its status even after cooking.

Production of radionuclides with generators

International Nuclear Information System (INIS)

Khujaev, S.; Egamediev, S.Kh.

2004-01-01

Full text: The radionuclide generator provides a convenient means for researchers and clinicians to obtain a source of radionuclides without dependence on nuclear facilities (nuclear reactor or cyclotron). It should be noted that radionuclide generator technique yields products of very high purity and it offers moreover the only possible way of obtaining very short-lived radionuclides for practical applications. Therefore at present radionuclide generators have found important uses in nuclear medicine. This talk reviews the development of preparation methods for radionuclide generators of current interest: 99 Mo- 99m Tc, 188 W- 188 Re and 68 Ge- 68 Ga. 99 Mo- 99m Tc generator. 99m Tc is presently the most widely used radionuclide in diagnostic nuclear medicine. The reason for such a preeminent position of 99m Tc in clinical uses is its extremely favorable nuclear properties with γ-energy of 140 keV and short half-life of 6 hours. Chromatographic generator of 99 Mo- 99m Tc based on aluminium oxide using as eluent of isotonic saline solution, containing nitrate-ions has been produced in INP AS RU. However, the main disadvantage of this generator is that the eluent-saline solution contains some amount of nitrate-ions. Nitrate-ions added to maximize and stabilize 99m Tc yields would interfere with the chemical reactions which involve Sn(II) reduction of the pertechnetate ion and which are used subsequently in the preparation of radiopharmaceuticals. Therefore we proposed the new method for preliminary treatment of aluminium oxide by the external gamma (Co-60) irradiation. It is found that the aluminium oxide has got electron-acceptor properties after gamma-irradiation. Adsorption of 99 Mo radionuclide as isopolymolybdate on gamma-irradiated aluminium oxide is very high and molybdenum is firmly retained. Adsorption capacity of gamma-irradiated aluminium oxide at pH 2-4 is 60-80 mg Mo per gram of Al 2 O 3 . The yields of 99m Tc from experimental generators remained high

Second-generation nanofiltered plasma-derived mannan-binding lectin product

DEFF Research Database (Denmark)

Laursen, I.; Houen, G.; Højrup, P.

2007-01-01

infections. Substitution therapy with plasma-derived MBL is a promising treatment of diseases associated with MBL deficiency. A first-generation MBL product has been shown to be safe and well tolerated, and patients have benefited from MBL treatment. Following is a description of the development...... of a nanofiltered second-generation MBL product from Cohn fraction III, with the use of a new affinity matrix for MBL purification and the characteristics of this improved product. MATERIALS AND METHODS: Carbohydrate-based gels were comparatively screened as affinity matrices. MBL was extracted from fraction III......, and affinity purified on a Superdex 200 pg column. The eluted material underwent two virus reduction steps: filtration through Planova 20N and solvent/detergent treatment. It was further purified by anion-exchange and gel-filtration chromatography. The affinity eluate and the final MBL fraction were...

Dual economies and international total factor productivity differences

DEFF Research Database (Denmark)

Chanda, Areendam; Dalgaard, Carl-Johan Lars

2008-01-01

This paper provides a framework that decomposes aggregate total factor productivity (TFP) into a component reflecting relative efficiency across sectors, and another component that reflects the absolute level of efficiency. A development accounting analysis suggests that as much as 85......% of the international variation in aggregate TFP can be attributed to variation in relative efficiency across sectors. Estimation results show that recent findings highlighting the importance of strong protection of property rights, financial development and geographical advantage for the level of TFP, can be explained...

A Revised Production Model of Learner-Generated Comic: Validation through Expert Review

OpenAIRE

Azman Farah Nadia; Zaibon Syamsul Bahrin; Shiratuddin Norshuhada

2018-01-01

Recent advancement of authoring tools has fostered a widespread interest towards using comics as a Digital Storytelling medium. This technology integrated learning approach is known as learner-generated comic production; where learners constructively produce digital stories in a form of educational comics. However, there were concerns towards the obstacles and challenges of producing learner-generated comics. Hence, a conceptual production model of learner-generated comic was proposed to guid...

Total Discharge Estimation in the Korean Peninsula Using Multi-Satellite Products

Directory of Open Access Journals (Sweden)

Jae Young Seo

2017-07-01

Full Text Available Estimation of total discharge is necessary to understand the hydrological cycle and to manage water resources efficiently. However, the task is problematic in an area where ground observations are limited. The North Korea region is one example. Here, the total discharge was estimated based on the water balance using multiple satellite products. They are the terrestrial water storage changes (TWSC derived from the Gravity Recovery and Climate Experiment (GRACE, precipitation from the Tropical Rainfall Measuring Mission (TRMM, and evapotranspiration from the Moderate Resolution Imaging Spectroradiometer (MODIS. The satellite-based discharge was compared with land surface model products of the Global Land Data Assimilation System (GLDAS, and a positive relationship between the results was obtained (r = 0.70–0.86; bias = −9.08–16.99 mm/month; RMSE = 36.90–62.56 mm/month; NSE = 0.01–0.62. Among the four land surface models of GLDAS (CLM, Mosaic, Noah, and VIC, CLM corresponded best with the satellite-based discharge, satellite-based discharge has a tendency to slightly overestimate compared to model-based discharge (CLM, Mosaic, Noah, and VIC in the dry season. Also, the total discharge data based on the Precipitation-Runoff Modeling System (PRMS and the in situ discharge for major five river basins in South Korea show comparable seasonality and high correlation with the satellite-based discharge. In spite of the relatively low spatial resolution of GRACE, and loss of information incurred during the process of integrating three different satellite products, the proposed methodology can be a practical tool to estimate the total discharge with reasonable accuracy, especially in a region with scarce hydrologic data.

GLOBALIZATION OF ECONOMY AND GREATER CYCLES OF THE TOTAL REGIONAL PRODUCT, INFLATION AND UNEMPLOYMENT

Directory of Open Access Journals (Sweden)

V.A. Belkin

2009-06-01

Full Text Available The process of synchronization of greater and small waves of real gross national product of the USA and a total regional product of the Chelyabinsk area is shown on the materials of economic statistics. The conclusion about defining influence of dynamics of real gross national product of the USA on the basic macroeconomic parameters of the Chelyabinsk area owing to high dependence of its economy on export of metal products is done from here. It is evidently shown, that the modern world economic crisis quite keeps within the theory of greater cycles of an economic conjuncture of N.D. Kondratyev. To greater cycles of a total regional product of the Chelyabinsk area there correspond return greater cycles of inflation and unemployment.

Biogenic Methane Generation Potential in the Eastern Nankai Trough, Japan: Effect of Reaction Temperature and Total Organic Carbon

Science.gov (United States)

Aung, T. T.; Fujii, T.; Amo, M.; Suzuki, K.

2017-12-01

Understanding potential of methane flux from the Pleistocene fore-arc basin filled turbiditic sedimentary formation along the eastern Nankai Trough is important in the quantitative assessment of gas hydrate resources. We considered generated methane could exist in sedimentary basin in the forms of three major components, and those are methane in methane hydrate, free gas and methane dissolved in water. Generation of biomethane strongly depends on microbe activity and microbes in turn survive in diverse range of temperature, salinity and pH. This study aims to understand effect of reaction temperature and total organic carbon on generation of biomethane and its components. Biomarker analysis and cultural experiment results of the core samples from the eastern Nankai Trough reveal that methane generation rate gets peak at various temperature ranging12.5°to 35°. Simulation study of biomethane generation was made using commercial basin scale simulator, PetroMod, with different reaction temperature and total organic carbon to predict how these effect on generation of biomethane. Reaction model is set by Gaussian distribution with constant hydrogen index and standard deviation of 1. Series of simulation cases with peak reaction temperature ranging 12.5°to 35° and total organic carbon of 0.6% to 3% were conducted and analyzed. Simulation results show that linear decrease in generation potential while increasing reaction temperature. But decreasing amount becomes larger in the model with higher total organic carbon. At higher reaction temperatures, >30°, extremely low generation potential was found. This is due to the fact that the source formation modeled is less than 1 km in thickness and most of formation do not reach temperature more than 30°. In terms of the components, methane in methane hydrate and free methane increase with increasing TOC. Drastic increase in free methane was observed in the model with 3% of TOC. Methane amount dissolved in water shows almost

BIG-10 fission product generation and reaction rates

International Nuclear Information System (INIS)

Rogers, J.W.

1976-01-01

Fission product generation rates for high quality fission foils and reaction rates of nonfission foils have been measured by gamma ray activation analyses. These foils were irradiated in the BIG-10 facility and the activities were measured by NaI counting techniques

GENERATION AND COST OF THE MEGAWATTS USING ECONOMETRICS

Directory of Open Access Journals (Sweden)

Raimundo Juan Lora-Freyre

2016-01-01

Full Text Available This work was conducted at the Energy Plant "Antonio Maceo" (Renté, in the province of Santiago de Cuba, under the Ministry of Energy and Mining. Aims to study the improvement of the planning process and as field of action the econometric modeling applied to the production of electricity. The overall objective of this research is to develop estimates of electricity generation and its total costs, and the analysis of the influence of production factors, using econometric techniques. In order to fulfill the above objective was used and perfected the "Information System for the Calculation of Production Estimates" (SICEP, which determines the response functions, considering the main factors influencing the electricity generation and its total costs. The results allow to show that the most influential factor in the generation of electricity is the fuel, it appreciated by analyzing the standardized b coefficient that reflects the highest value (0,39. Furthermore, the most influential factor in the total cost of generation is the additive, which shows a coefficient b standardized 0,51. The estimates given show the standard error values almost coincide with the standard deviation obtained in the reporting of error normality. The results will be useful to the process of production planning and securing materials from it. 

Effect of warm-smoking on total microbial count of meat products

Directory of Open Access Journals (Sweden)

A Javadi

2007-11-01

Full Text Available The frankfurters are amongst the most famous and popular sausages in the world and beef and poultry meat are used in Iran for their preparation. The techniques of warm smoking at 42°c for two hours and then hot smoking together with steam cooking at 8°c for one hour are utilized in proportion of this product. In spite of its carcinogenic properties, smoke is used to create color, flavor and odor and to improve the preservative qualities of sausages. In this study, 14 sausage samples were taken from each of the stages of frankfurter production line including pre-smoking, post- warm smoking and post-hot smoking, their total microbial counts (aerobic mesophiles determined and the means of the three stages compared using the ANOVA statistical test. The results indicated that the total microbial count increased significantly (P

Generating and testing methods for consumer-oriented product development

International Nuclear Information System (INIS)

2001-10-01

In order to obtain a good insight into various design methods that can be used by product developers to enable them to develop and test useful domotics products (domotics: intelligent systems for the home), an inventory has been made of the methods used in the Netherlands. The inventory is directed at two categories of methods: (1) Methods of getting better acquainted with the user and/or the problem, and of generating novel solutions: generative methods; and (2) Methods of assessing solutions (through various phases of the designing process): testing methods. The first category of methods concentrates on the designing process. In other words: how can the designer realise as much as possible of the workability of (domotics) products during the designing process? The second category aims at testing a design (in whatever shape: drawing, prototype, functional computer animation, etc.) through its users. These are methods of assessing a design at various stages of the designing process [nl

Power generation versus fuel production in light water hybrid reactors

International Nuclear Information System (INIS)

Greenspan, E.

1977-06-01

The economic potentials of fissile-fuel-producing light-water hybrid reactors (FFP-LWHR) and of fuel-self-sufficient (FSS) LWHR's are compared. A simple economic model is constructed that gives the capital investment allowed for the hybrid reactor so that the cost of electricity generated in the hybrid based energy system equals the cost of electricity generated in LWR's. The power systems considered are LWR, FSS-LWHR, and FFP-LWHR plus LWR, both with and without plutonium recycling. The economic potential of FFP-LWHR's is found superior to that of FSS-LWHR's. Moreover, LWHR's may compete, economically, with LWR's. Criteria for determining the more economical approach to hybrid fuel or power production are derived for blankets having a linear dependence between F and M. The examples considered favor the power generation rather than fuel production

A review on the current status and production technology for 188W-188Re generator system

International Nuclear Information System (INIS)

Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M.

1998-11-01

The current status of 188 W- 188 Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of 188 W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced 188 W- 188 Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of 188 W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of 186 W enriched sample, 188 W- 188 Re generator production experiments were performed to evaluate the possibility of 188 W- 188 Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical 188 W- 188 Re generator production using of low-specific activity 188 W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs

Characterization of SNARE Cleavage Products Generated by Formulated Botulinum Neurotoxin Type-A Drug Products

Directory of Open Access Journals (Sweden)

Jack Xie

2010-08-01

Full Text Available The study evaluated substrate cleavage product(s generated by three botulinum neurotoxin serotype A (BoNT/A medicinal drug products utilizing a novel and highly specific, light-chain activity, high-performance liquid chromatography (LCA-HPLC method. Samples were reacted with a commercially available BoNT/A fluorescent substrate derived from the SNAP-25 sequence. Reaction products were separated by reversed-phase HPLC. The method detected an atypical cleavage pattern by one of the formulated drug products. IncobotulinumtoxinA produced two cleavage fragments rather than the single fragment typically generated by BoNT/A. Identification confirmed the secondary cleavage at a position corresponding to SNAP-25 Arg198–Ala199 (normal BoNT/A cleavage is Gln197–Arg198. Arg198–Ala199 is also the cleavage site for trypsin and serotype C toxin. Normal cleavage was observed for all other BoNT/A drug product samples, as well as 900-kD and 150-kD bulk toxin BoNT/A. The reason for this unexpected secondary cleavage pattern by one formulated BoNT/A drug product is unknown. Possible explanations include a contaminating protease and/or damage to the 150-kD type-A toxin causing nonspecific substrate recognition and subsequent cleavage uncharacteristic of type-A toxin. The BoNT/A drug products were also analyzed via the LCA-HPLC assay using a commercial BoNT/C fluorescent substrate derived from the syntaxin sequence. Cleavage of the serotype C substrate by incobotulinumtoxinA was also confirmed whilst neither of the other drug products cleaved the syntaxin substrate.

Non-destructive Measurement of Total Carotenoid Content in Processed Tomato Products

NARCIS (Netherlands)

Bicanic, D.; Streza, M.; Dóka, O.; Valinger, D.; Luterotti, S.; Ajtony, Zs; Kurtanjek, Z.; Dadarlat, D.

2015-01-01

Carotenes found in a diversity of fruits and vegetables are among important natural antioxidants. In a study described in this paper, the total carotenoid content (TCC) in seven different products derived from thermally processed tomatoes was determined using laser photoacoustic spectroscopy

Sustainable Production of Second-Generation Biofuels. Potential and perspectives in major economies and developing countries

Energy Technology Data Exchange (ETDEWEB)

Eisentraut, A

2010-02-15

The paper focuses on opportunities and risks presented by second-generation biofuels technologies in eight case study countries: Brazil, Cameroon, China, India, Mexico, South Africa, Tanzania and Thailand. The report begins by exploring the state of the art of second-generation technologies and their production, followed by projections of future demand and a discussion of drivers of that demand. The report then delves into various feedstock options and the global potential for bioenergy production. The final chapter offers a look at the potential for sustainable second-generation biofuel production in developing countries including considerations of economic, social and environmental impacts. Key findings of the report include that: second-generation biofuels produced from agricultural and forestry residues can play a crucial role in the transport sector without competing with food production; the potential for second-generation biofuels should be mobilized in emerging and developing countries where a large share of global residues is produced; less-developed countries will first need to invest in agricultural production and infrastructure in order to improve the framework conditions for the production of second-generation biofuels; financial barriers to production exist in many developing countries; and the suitability of second-generation biofuels against individual developing countries' needs should be evaluated.

Sustainable Production of Second-Generation Biofuels. Potential and perspectives in major economies and developing countries

International Nuclear Information System (INIS)

Eisentraut, A.

2010-02-01

The paper focuses on opportunities and risks presented by second-generation biofuels technologies in eight case study countries: Brazil, Cameroon, China, India, Mexico, South Africa, Tanzania and Thailand. The report begins by exploring the state of the art of second-generation technologies and their production, followed by projections of future demand and a discussion of drivers of that demand. The report then delves into various feedstock options and the global potential for bioenergy production. The final chapter offers a look at the potential for sustainable second-generation biofuel production in developing countries including considerations of economic, social and environmental impacts. Key findings of the report include that: second-generation biofuels produced from agricultural and forestry residues can play a crucial role in the transport sector without competing with food production; the potential for second-generation biofuels should be mobilized in emerging and developing countries where a large share of global residues is produced; less-developed countries will first need to invest in agricultural production and infrastructure in order to improve the framework conditions for the production of second-generation biofuels; financial barriers to production exist in many developing countries; and the suitability of second-generation biofuels against individual developing countries' needs should be evaluated.

Sustainable Production of Second-Generation Biofuels. Potential and perspectives in major economies and developing countries

Energy Technology Data Exchange (ETDEWEB)

Eisentraut, A.

2010-02-15

The paper focuses on opportunities and risks presented by second-generation biofuels technologies in eight case study countries: Brazil, Cameroon, China, India, Mexico, South Africa, Tanzania and Thailand. The report begins by exploring the state of the art of second-generation technologies and their production, followed by projections of future demand and a discussion of drivers of that demand. The report then delves into various feedstock options and the global potential for bioenergy production. The final chapter offers a look at the potential for sustainable second-generation biofuel production in developing countries including considerations of economic, social and environmental impacts. Key findings of the report include that: second-generation biofuels produced from agricultural and forestry residues can play a crucial role in the transport sector without competing with food production; the potential for second-generation biofuels should be mobilized in emerging and developing countries where a large share of global residues is produced; less-developed countries will first need to invest in agricultural production and infrastructure in order to improve the framework conditions for the production of second-generation biofuels; financial barriers to production exist in many developing countries; and the suitability of second-generation biofuels against individual developing countries' needs should be evaluated.

Utilization of hydrogen gas production for electricity generation in ...

African Journals Online (AJOL)

Lecturer

2012-05-03

% total sugar concentration of sugar ... 107 cfu/ml, pH was nearly constant at 6.0, and finally the H2 was drifted to fuel cell to generate electrical power until 4 V ..... hybrid system, reverse micelles and by metabolic engi- neering.

Total Factor Productivity, Demographic Traits and ICT: Empirical Analysis for Asia

Directory of Open Access Journals (Sweden)

Bilal MEHMOOD

2014-01-01

Full Text Available This paper advances a model to explain the total factor productivity in Asian countries, most of which are labor surplus and are endowed with substantial human capital. Such promising demographic potentials are considered as complementary factors to use of Information and Communication Technology (ICT. Population with such favorable demographic traits and access to ICT results in higher Total factor productivity (TFP. We call this as Demo-Tech-TFP Model and is tested by using data for 2000-2010 of 24 Asian countries. Econometric concerns like presence of endogenous and/or predetermined covariates and small time-series and cross-sectional dimensions of panel dataset are tackled by using System Generalized Method of Moments (SYS-GMM. Results show considerable support for the Demo-Tech-TFP hypothesis. Need is to design such models that suit the local demography and patterns of technological diffusion currently taking place in developing countries.

First-Generation Versus Second-Generation Drug-Eluting Stents in Coronary Chronic Total Occlusions: Two-Year Results of a Multicenter Registry.

Directory of Open Access Journals (Sweden)

Jong-Hwa Ahn

Full Text Available Limited data are available regarding the long-term clinical outcomes of second-generation drug-eluting stents (DES versus first-generation DES in patients with coronary chronic total occlusion (CTO who undergo percutaneous coronary intervention (PCI. The aim of this study was to compare the clinical outcomes of second-generation DES with those of first-generation DES for the treatment of CTO.Between March 2003 and February 2012, 1,006 consecutive patients with CTO who underwent successful PCI using either first-generation DES (n = 557 or second-generation DES (n = 449 were enrolled in a multicenter, observational registry. Propensity-score matching was also performed. The primary outcome was cardiac death over a 2-year follow-up period. No significant differences were observed between the two groups regarding the incidence of cardiac death (first-generation DES versus second-generation DES; 2.5% vs 2.0%; hazard ratio [HR]: 0.86; 95% confidence interval [CI]: 0.37 to 1.98; p = 0.72 or major adverse cardiac events (MACE, 11.8% vs 11.4%; HR: 1.00; 95% CI: 0.67 to 1.50; p = 0.99. After propensity score matching, the incidences of cardiac death (HR: 0.86; 95% CI: 0.35 to 2.06; p = 0.86 and MACE (HR: 0.93; 95% CI: 0.63 to 1.37; p = 0.71 were still similar in both groups. Furthermore, no significant differences were observed between sirolimus-eluting, paclitaxel-eluting, zotarolimus-eluting, and everolimus-eluting stents regarding the incidence of cardiac death or MACE.This study shows that the efficacy of second-generation DES is comparable to that of first-generation DES for treatment of CTO over 2 years of follow-up.

Heavy metal, total arsenic, and inorganic arsenic contents of algae food products.

Science.gov (United States)

Almela, C; Algora, S; Benito, V; Clemente, M J; Devesa, V; Súñer, M A; Vélez, D; Montoro, R

2002-02-13

The total arsenic, inorganic arsenic, lead, cadmium, and mercury contents of 18 algae food products currently on sale in Spain were determined. The suitability of the analytical methodologies for this type of matrix was confirmed by evaluating their analytical characteristics. The concentration ranges found for each contaminant, expressed in milligrams per kilogram of dry weight, were as follows: total arsenic, 2.3-141; inorganic arsenic, 0.15-88; lead, mercury, 0.004-0.04. There is currently no legislation in Spain regarding contaminants in algae food products, but some of the samples analyzed revealed Cd and inorganic As levels higher than those permitted by legislation in other countries. Given the high concentrations of inorganic As found in Hizikia fusiforme, a daily consumption of 1.7 g of the product would reach the Provisional Tolerable Weekly Intake recommended by the WHO for an average body weight of 68 kg. A more comprehensive study of the contents and toxicological implications of the inorganic As present in the algae food products currently sold in Spain may be necessary, which might then be the basis for the introduction of specific sales restrictions.

Whey based beverages - new generation of dairy products

Directory of Open Access Journals (Sweden)

Irena Jeličić

2008-08-01

Full Text Available Whey is a by product in the process of cheese production. Composition and characteristics of whey are depending on the production technology, the end product and the quality of used milk. Liquid whey consists of approximately 93% water and contains almost 50% of total solids present in the milk of which lactose is main constituent. Lactose is the main constituent of whey while proteins represent less than 1% of total solids. Minerals and vitamins are present in fewer amounts also. Production of whey based beverages started in 1970's and until today a wide range of different whey based beverages has been developed. They can be produced from native sweet or acid whey, from deproteinised whey, from native whey which was diluted with water, from whey powder or by whey fermentation. Non alcoholic whey beverages include wide range of products obtained by mixing native sweet, diluted or acid whey with different additives like tropical fruits (but also other fruits like apples, pears, strawberries or cranberries, crops and their products (mainly bran, isolates of vegetable proteins, CO2, chocolate, cocoa, vanilla extracts and other aromatizing agents. Special attention is being paid to production of fermented whey beverages with probiotic bacteria where the most important step is the choice of suitable culture of bacteria in order to produce functional beverage with high nutritional value and acceptable sensory characteristics. Non alcoholic whey beverages also include dietetic beverages, drinks with hydrolyzed lactose, milk like drinks and powder drinks. Whey is a very good raw material for production of alcoholic beverages due to the fact that the main constituent of the solid content is lactose (about 70%. Alcoholic whey beverages include drinks with small amount of alcohol (up to 1,5%, whey beer and whey wine. Whey beverages are suitable for wide range of consumers – from children to the elderly ones. They have very high nutritional value and good

Comparative analysis for power generation and ethanol production from sugarcane residual biomass in Brazil

International Nuclear Information System (INIS)

Seabra, Joaquim E.A.; Macedo, Isaias C.

2011-01-01

This work compares the technical, economic and environmental (GHG emissions mitigation) performance of power generation and ethanol production from sugarcane residual biomass, considering conversion plants adjacent to a sugarcane mill in Brazil. Systems performances were simulated for a projected enzymatic saccharification co-fermentation plant (Ethanol option) and for a commercial steam-Rankine power plant (Electricity option). Surplus bagasse from the mill would be used as fuel/raw material for conversion, while cane trash collected from the field would be used as supplementary fuel at the mill. For the Electricity option, the sugarcane biorefinery (mill+adjacent plant) would produce 91 L of ethanol per tonne of cane and export 130 kWh/t of cane, while for the Ethanol option the total ethanol production would be 124 L/t of cane with an electricity surplus of 50 kWh/t cane. The return on investment (ROI) related to the biochemical conversion route was 15.9%, compared with 23.2% for the power plant, for the conditions in Brazil. Considering the GHG emissions mitigation, the environmentally preferred option is the biochemical conversion route: the net avoided emissions associated to the adjacent plants are estimated to be 493 and 781 kgCO 2 eq/t of dry bagasse for the Electricity and Ethanol options, respectively. - Research Highlights: → Power generation would present better profitability than ethanol production from sugarcane residues in Brazil, in the reference scenario adopted here. → The Ethanol option would be able to mitigate more GHG emissions in Brazil. → The economics for the ethanol production technology are more likely to improve in the future.

Second Generation Ethanol Production from Brewers’ Spent Grain

Directory of Open Access Journals (Sweden)

Rossana Liguori

2015-03-01

Full Text Available Ethanol production from lignocellulosic biomasses raises a global interest because it represents a good alternative to petroleum-derived energies and reduces the food versus fuel conflict generated by first generation ethanol. In this study, alkaline-acid pretreated brewers’ spent grain (BSG was evaluated for ethanol production after enzymatic hydrolysis with commercial enzymes. The obtained hydrolysate containing a glucose concentration of 75 g/L was adopted, after dilution up to 50 g/L, for fermentation by the strain Saccharomyces cerevisiae NRRL YB 2293 selected as the best producer among five ethanologenic microorganims. When the hydrolysate was supplemented with yeast extract, 12.79 g/L of ethanol, corresponding to 0.28 g of ethanol per grams of glucose consumed (55% efficiency, was obtained within 24 h, while in the non-supplemented hydrolysate, a similar concentration was reached within 48 h. The volumetric productivity increased from 0.25 g/L·h in the un-supplemented hydrolysate to 0.53 g/L h in the yeast extract supplemented hydrolysate. In conclusion, the strain S. cerevisiae NRRL YB 2293 was shown able to produce ethanol from BSG. Although an equal amount of ethanol was reached in both BSG hydrolysate media, the nitrogen source supplementation reduced the ethanol fermentation time and promoted glucose uptake and cell growth.

Generators, Calorimeter Trigger and J/ψ production at LHCb

CERN Document Server

Robbe, P

This document presents results related to the preparation of the physics program ofLHCb: generator software development, calorimeter trigger commissioning and measurement of J/psi production. A detailed simulation is mandatory to developthe analysis tools needed for this program and a detailed generator framework hasbeen implemented which describes for example B mixing and CP violation in B decays in the LHCb hadronic environment. For hadronic decay modes, the trigger of the experiment is based at the first level on information provided by the calorimeters, and in particular the hadronic calorimeter. The large J/psi production cross-section at the LHC allows to perform, with the first data recorded, a measurement of the J/psi differential cross-section and to confront it with theoretical models to test QCD in the heavy quark sector.

Early Generation Seed Production and Supply in Ethiopia: Status ...

African Journals Online (AJOL)

Karta K. Kalsa

the institutionalization of early generation seed production in Ethiopia. .... (Bishaw and van Gastel, 2007) and cross-pollinated crops (Maize Program, 1999).The .... Louwaars, 1999) have been suggested to address some critical gaps in early ...

Total cross section for Z0 production in electron proton collisions

International Nuclear Information System (INIS)

Salati, P.; Wallet, J.C.

1982-01-01

We present an exact calculation of the total cross section sigmasub(t)sub(o)sub(t) of the Z 0 production in e - +p→e - +Z 0 +X processes. We find a total cross section sigmasub(t)sub(o)sub(t)approx. equal to2.2x10 -36 cm 2 for an energy in the center of mass of 300 GeV and a Z 0 mass of 90 GeV, which is quite a measurable result in some e - proton collider experiments, like HERA or SPS/LEP. (orig.)

Using analogs to generate production forecasts in Faja

Energy Technology Data Exchange (ETDEWEB)

Garcia Lugo, Rolando A. [Repsol (Canada)

2011-07-01

In the Carabobol Block, extra heavy oil will be produced by cold production from Miocene Morical Member sands. Many parameters such as pressure, temperature, solution gas oil ratio and viscosity variation significantly impact well productivity; unfortunately little information is available on the Carabobol Block. The aim of this paper is to provide a new methodology for using analog data to develop fluid properties correlations and a future production profile. Data from the analog neighbour field in the Orinoco oil belt was used. A methodology using scatter data was successfully applied for the Carabobol Block and fluid composition, a complete PVT and an analytical forecast were found and confirmed with actual laboratory data and a gross numerical model. This study showed that analog data can be used as a first approach to assess initial reservoir conditions and fluid properties and to generate production forecasts.

Total greenhouse gas emissions related to the Dutch crop production system

NARCIS (Netherlands)

Kramer, K.J.; Moll, H.C.; Nonhebel, S.

1999-01-01

This article discusses the greenhouse gas emissions (CO2, CH4, N2O) related to Dutch agricultural crop production. Emissions occur during agricultural processes (direct emissions) as well as in the life cycle of the required inputs (indirect emissions). An integrated approach assesses the total

The comparison analysis of total factor productivity and eco-efficiency in China's cement manufactures

International Nuclear Information System (INIS)

Long, Xingle; Zhao, Xicang; Cheng, Faxin

2015-01-01

This paper mainly compares total factor productivity and eco-efficiency in China's cement manufactures from 2005 to 2010. First, we evaluate total factor productivity and eco-efficiency of China's cement manufactures through distance function and directional slack-based measure (DSBM) respectively. Furthermore, we also explore the difference of total factor productivity and eco-efficiency. Last, we investigate the determinants of Malmquist, Mamlquist–Luenberger of China's cement manufactures through random-effect Tobit and bootstrap truncated econometric methods. We find that there are some gaps between Malmquist and Mamlquist–Luenberger of China's cement manufactures. Per labor cement industry value has U-shape relationship with both Malmquist and Malmquist–Luenberger. It is necessary to adopt advanced technology to reduce pollutant emissions. -- Highlights: •Eco-efficiency of cement manufactures is evaluated through slack-based measure. •Eco-efficiency of China's cement manufactures has biases with total factor productivity. •Environmental Kuznets curve is existed for China's cement manufactures

Wind power generation

International Nuclear Information System (INIS)

Anon.

1999-01-01

The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of private wind turbines. The data are arranged according to the size of the turbines. For each wind turbine the name of the site and type of turbine is given as well as the production during the last 3 months in 1998, and the total production in 1997 and 1998. Data on the operation is given

Determination of Total Arsenic in Seaweed Products by Neutron Activation Analysis

International Nuclear Information System (INIS)

Salim, N.; Santoso, M.; Yanuar, A.; Damayanti; Kartawinata, T.G.

2013-01-01

Seaweed products are widely consumed as food nowadays. Seaweeds are known to contain arsenic due to their capability to accumulate arsenic from the environment. Arsenic is a known toxic element which naturally occurs in the environment. Ingestion of high levels of arsenic will cause several adverse health effects. Arsenic in food occurs at trace concentrations which require sensitive and selective analysis methods to perform elemental analysis on. Validated neutron activation analysis was used to determine the arsenic contents in seaweed products namely catoni from domestic product and nori from foreign products. The total arsenic concentration in the samples analyzed ranges from 0.79 mg/kg to 30.14 mg/kg with mean concentration 14.39 mg/kg. The estimated exposure to arsenic contributed by the analyzed products is from 0.07% up to 8.54% of the established provisional tolerable daily intake (PTDI) which is still far below the maximum tolerable level. (author)

Determination of Total Arsenic in Seaweed Products by Neutron Activation Analysis

Directory of Open Access Journals (Sweden)

N. Salim

2013-04-01

Full Text Available Seaweed products are widely consumed as food nowadays. Seaweeds are known to contain arsenic due to their capability to accumulate arsenic from the environment. Arsenic is a known toxic element which naturally occurs in the environment. Ingestion of high levels of arsenic will cause several adverse health effects. Arsenic in food occurs at trace concentrations which require sensitive and selective analysis methods to perform elemental analysis on. Validated neutron activation analysis was used to determine the arsenic contents in seaweed products namely catoni from domestic product and nori from foreign products. The total arsenic concentration in the samples analyzed ranges from 0.79 mg/kg to 30.14 mg/kg with mean concentration 14.39 mg/kg. The estimated exposure to arsenic contributed by the analyzed products is from 0.07% up to 8.54% of the established provisional tolerable daily intake (PTDI which is still far below the maximum tolerable level

Research on the industry environmental total factor productivity in Jiangsu Province based on the SBM-SML

Science.gov (United States)

Lingfang, Sun; Han, Wang; Jian, Gong

2017-03-01

This paper uses the SBM-SML to measure the industry environmental total factor productivity in Jiangsu province of its 13 cities during 2005-2014 with SO2 emissions as the undesirable output, and discomposes the total factor productivity into the pure technical efficiency, the scale efficiency change, the pure technical change and the scale technical change. The research shows that the overall trend of the industry environmental total factor productivity is increasing in Jiangsu province during 2005-2014, the technical change is a main reason pushing up growth rates of economy, and the pure technical change is the intrinsic motivation of the technical change.Introduction.

ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-02-01

Drink (Coca-Cola, Sprite, Fanta and non-carbonated (Frestea,Ades. In effort to maintain quality and improve productivity, one of factor which must be paid attention is maintain problem (maintenance facilities/machine produce.  In this paper study to hit effect and cause generated by breakdown machine of Line 8/Carbonated Soft Drink, specially conveyor, filler machine, and bottle washer machine. For the reason, to get machine which can be awaked by reliability required a good concept. Total Productive Maintenance (TPM represent a concept which is good to realize the mentioned. Because of the concept besides entangling all personnel in company also aim to take care of all production facility owned company. Data used represent data breakdown conveyor, filler machine, and bottle washer machine from ME Monthly Report PT.CCBI during in Januari-Desember 2005 specially for line 8.  In addition this paper also study to performance maintenance PT. Coca-Cola Bottling Indonesia-Central Java, reckonedly assess Mean Time Beetwen Failure (MTBF, Mean Time To Repair (MTTR, and also Availability machine, by using data record Line 8 in May 2006 until July 2006. So that later will be known by the circumstance actual information from company about maintenance system, specially at Line 8/Carbonated Soft Drink whether goodness or ugly. Keywords : Total Production Maintenance, Conveyor, Filler Machine, Bottle Washer Machine, Performance Maintenance

Applying total interpretive structural modeling to study factors affecting construction labour productivity

Directory of Open Access Journals (Sweden)

Sayali Shrikrishna Sandbhor

2014-03-01

Full Text Available Construction sector has always been dependent on manpower. Most of the activities carried out on any construction site are labour intensive. Since productivity of any project depends directly on productivity of labour, it is a prime responsibility of the employer to enhance labour productivity. Measures to improve the same depend on analysis of positive and negative factors affecting productivity. Major attention should be given to factors that decrease the productivity of labour. Factor analysis thus is an integral part of any study aiming to improve productivity.  Interpretive structural modeling is a methodology for identifying and summarizing relationships among factors which define an issue or problem. It provides a means to arrange the factors in an order as per their complexity. This study attempts to use the latest version of interpretive structural modeling i.e. total interpretive structural modeling to analyze factors negatively affecting construction labour productivity. It establishes interpretive relationship among these factors facilitating improvement in the overall productivity of construction site.

A simple biosynthetic pathway for large product generation from small substrate amounts

Science.gov (United States)

Djordjevic, Marko; Djordjevic, Magdalena

2012-10-01

A recently emerging discipline of synthetic biology has the aim of constructing new biosynthetic pathways with useful biological functions. A major application of these pathways is generating a large amount of the desired product. However, toxicity due to the possible presence of toxic precursors is one of the main problems for such production. We consider here the problem of generating a large amount of product from a potentially toxic substrate. To address this, we propose a simple biosynthetic pathway, which can be induced in order to produce a large number of the product molecules, by keeping the substrate amount at low levels. Surprisingly, we show that the large product generation crucially depends on fast non-specific degradation of the substrate molecules. We derive an optimal induction strategy, which allows as much as three orders of magnitude increase in the product amount through biologically realistic parameter values. We point to a recently discovered bacterial immune system (CRISPR/Cas in E. coli) as a putative example of the pathway analysed here. We also argue that the scheme proposed here can be used not only as a stand-alone pathway, but also as a strategy to produce a large amount of the desired molecules with small perturbations of endogenous biosynthetic pathways.

A simple biosynthetic pathway for large product generation from small substrate amounts

Energy Technology Data Exchange (ETDEWEB)

Djordjevic, Marko [Institute of Physiology and Biochemistry, Faculty of Biology, University of Belgrade (Serbia); Djordjevic, Magdalena [Institute of Physics Belgrade, University of Belgrade (Serbia)

2012-10-01

A recently emerging discipline of synthetic biology has the aim of constructing new biosynthetic pathways with useful biological functions. A major application of these pathways is generating a large amount of the desired product. However, toxicity due to the possible presence of toxic precursors is one of the main problems for such production. We consider here the problem of generating a large amount of product from a potentially toxic substrate. To address this, we propose a simple biosynthetic pathway, which can be induced in order to produce a large number of the product molecules, by keeping the substrate amount at low levels. Surprisingly, we show that the large product generation crucially depends on fast non-specific degradation of the substrate molecules. We derive an optimal induction strategy, which allows as much as three orders of magnitude increase in the product amount through biologically realistic parameter values. We point to a recently discovered bacterial immune system (CRISPR/Cas in E. coli) as a putative example of the pathway analysed here. We also argue that the scheme proposed here can be used not only as a stand-alone pathway, but also as a strategy to produce a large amount of the desired molecules with small perturbations of endogenous biosynthetic pathways. (paper)

A simple biosynthetic pathway for large product generation from small substrate amounts

International Nuclear Information System (INIS)

Djordjevic, Marko; Djordjevic, Magdalena

2012-01-01

A recently emerging discipline of synthetic biology has the aim of constructing new biosynthetic pathways with useful biological functions. A major application of these pathways is generating a large amount of the desired product. However, toxicity due to the possible presence of toxic precursors is one of the main problems for such production. We consider here the problem of generating a large amount of product from a potentially toxic substrate. To address this, we propose a simple biosynthetic pathway, which can be induced in order to produce a large number of the product molecules, by keeping the substrate amount at low levels. Surprisingly, we show that the large product generation crucially depends on fast non-specific degradation of the substrate molecules. We derive an optimal induction strategy, which allows as much as three orders of magnitude increase in the product amount through biologically realistic parameter values. We point to a recently discovered bacterial immune system (CRISPR/Cas in E. coli) as a putative example of the pathway analysed here. We also argue that the scheme proposed here can be used not only as a stand-alone pathway, but also as a strategy to produce a large amount of the desired molecules with small perturbations of endogenous biosynthetic pathways. (paper)

Production of syngas and oil at biomass refinery and their application in low speed two stroke engines for combined cycle electric energy generation

Energy Technology Data Exchange (ETDEWEB)

Pinatti, Daltro Garcia [Universidade do Sul de Santa Catarina (UNISUL), Tubarao, SC (Brazil)], E-mail: pinatti@demar.eel.usp.br; Oliveira, Isaias de; Ferreira, Joao Carlos; Romao, Erica Leonor [RM Materiais Refratarios Ltd., Lorena, SP (Brazil)], Emails: isaias@rm-gpc.com.br, joaocarlos@rm-gpc.com.br, ericaromao@rm-gpc.com.br; Conte, Rosa Ana [University of Sao Paulo (DEMAR/EEL/USP), SP (Brazil). Lorena School of Engineering. Dept. of Materials Engineering], E-mail: rosaconte@demar.eel.usp.br

2009-07-01

Low speed two stroke engines burn fuels of medium quality with high efficiency (47%) and allows a flexible use of oil (> 8% of total power) and syngas (< 92%, low heating value-LHV>11.2MJ/m{sup 3}). Biomass refinery (BR) generates oil from sludge and oleaginous biomass by low temperature conversion and syngas from lignocellulosic biomass treated by diluted acidic prehydrolysis. BR has low investment cost (US$1,500.00/kW) compared with hydroelectric plants (US$2,500.00/kW) and both generate electric energy with sales price below US$75.00/MWh. It allows distributed generation from 30 MW up to 170 MW or centralized power of 1 GW with six motor generator sets. BR matrix, mass and energy balance, fuels compositions, modulations and scope of supply will be presented. Besides electric energy BR can be tailored to supply other products such as ethanol, H{sub 2} for fuel cells, biodiesel, fertilizer recycling, char and simultaneously maximizes the production of animal protein. (author)

Utilization of hydrogen gas production for electricity generation in ...

African Journals Online (AJOL)

Utilization of hydrogen gas production for electricity generation in fuel cell by Enterobacter aerogenes ADH 43 with many kinds of carbon sources in batch stirred tank reactor. MA Rachman, LD Eniya, Y Liasari, MM Nasef, A Ahmad, H Saidi ...

Removal of radon decay products with ion generators - comparison of experimental results with theory

International Nuclear Information System (INIS)

Maher, E.F.; Rudnick, S.N.; Moeller, D.W.

1985-01-01

The potential of ion generators to remove radon decay products from the airspace of residences or mines was investigated both experimentally and theoretically. A positive ion generator, producing an air ion current of less than 2 μA and operated in a 78 m 3 chamber with air exchange rates ranging from 0.2 to 0.8-hr -1 and relative humidities ranging from 20 to nearly 100%, reduced the concentrations of airborne radon decay products by as much as 85%. A negative ion generator, operated under the same range of conditions, was less effective, producing airborne radon decay product removals up to 67%. Experimental results compared favorably with a simple theoretical model that hypothesizes a three-part process: 1) radon decay products, as well as aerosol particles to which some of these decay products attach, are charged by diffusion of the air ions produced by the generator; 2) the air ions also produce a nonuniform space charge in the chamber that results in an electric field gradient radially outwards from the generator to the chamber surfaces; and 3) because of the influence of this electric field, the charged decay products and particles migrate toward nearby surfaces where they plate out. The net benefit of unipolar space charging is a substantial decrease in the steady-state radon decay product concentrations in the airspace with a corresponding reduction in the lung dose equivalent to the occupants

MC generator HARDPING 2.0: hadron production in lepton-nuclei interactions at high energies

International Nuclear Information System (INIS)

Berdnikov, Ya.A.; Ivanov, A.E.; Kim, V.T.; Murzin, V.A.

2011-01-01

Hadron production in lepton-nucleus interactions at high-energies is considered in framework of developing Monte Carlo (MC) generator HARDPING (HARD Probe INteraction Generator). Such effects as formation length, energy loss and multiple rescattering for produced hadrons are implemented into the HARPING. Available data from HERMES on hadron production in lepton-nucleus collisions are described by the current version of the HARDPING generator in a reasonable agreement.

Energy consumption and total factor productivity growth in Iranian agriculture

Directory of Open Access Journals (Sweden)

Reza Moghaddasi

2016-11-01

Full Text Available In this study we investigated the relation between energy consumption and growth of total factor productivity (TFP of agriculture in Iran from 1974 to 2012 using Solow residual method. The results from estimated aggregate Cobb–Douglas production function showed that one percent change in the value of labor, capital and energy will lead to 4.07, 0.09 and 0.49 percent change in agriculture value added, respectively. Also in a long term, based on the Johansen cointegration test, there is a negative relation between TFP growth and energy consumption in Iranian agriculture which might be due to cheap and inefficient energy use in this sector. Gradual liberalization of energy price and use of so called green box support policies is recommended.

Selective Sequential Zero-Base Budgeting Procedures Based on Total Factor Productivity Indicators

OpenAIRE

A. Ishikawa; E. F. Sudit

1981-01-01

The authors' purpose in this paper is to develop productivity-based sequential budgeting procedures designed to expedite identification of major problem areas in bugetary performance, as well as to reduce the costs associated with comprehensive zero-base analyses. The concept of total factor productivity is reviewed and its relations to ordinary and zero-based budgeting are discussed in detail. An outline for a selective sequential analysis based on monitoring of three key indicators of (a) i...

Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2016-04-01

Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

Production of 14 MeV neutrons from D-D neutron generators

International Nuclear Information System (INIS)

Cecil, F.E.; Nieschmidt, E.B.

1986-01-01

The production of 14 MeV neutrons from a D-D neutron generator resulting from tritium buildup from the d(d,p)t reaction in the target is discussed. The effect of the 14 MeV neutrons on fast neutron activation analysis with D-D neutron generators is evaluated. (orig.)

Investigation of Productivity of Brown’s (HHO Gas Generator

Directory of Open Access Journals (Sweden)

Andrius Brazdžiūnas

2017-01-01

Full Text Available There were made tests of productivity of Brown’s gas generator using different potassium hydroxide (KOH concentration changing voltage and amperage. It is described experimental stand that is used to do researches and methodology of experiments performance. Brown’s gas production in electrolyser (electrolyser – the device that is going electrolysis to use stainless steel (AISI 316 electrodes. It was determined after researches that increasing the potassium hydroxide (KOH concentration in the solution and using the same amperage and voltage of the all concentration results are similar. The highest productivity 1.429 l/min was obtained by using a 120 A amperage and 15 V voltage.

Total and inelastic cross sections in the PHOJET MC event generator

Energy Technology Data Exchange (ETDEWEB)

Fedynitch, Anatoli [CERN, Geneva (Switzerland); IKP, KIT, Karlsruhe (Germany); Engel, Ralph [IKP, KIT, Karlsruhe (Germany)

2013-07-01

The Monte-Carlo event generator PHOJET 1.12 has been successfully employed in experimental and technical fields of particle and cosmic ray physics for more than a decade. The latest official version, released in 2000, uses the total, elastic and diffractive cross-section data available during the Tevatron era as a basis for the extrapolation to higher energies. The employed model is based on Regge-arguments, typically resulting in reliable and stable predictions. However, recent LHC (min-bias) measurements of charged particle distributions and cross-sections showed, that a major rework of the underlying model is needed for a more accurate description of accelerator data. Here, we present the status of the ongoing work and give an outlook for the upcoming versions.

A study for production simulation model generation system based on data model at a shipyard

Directory of Open Access Journals (Sweden)

Myung-Gi Back

2016-09-01

Full Text Available Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

Fission product retention during faults involving steam generator tube rupture

International Nuclear Information System (INIS)

Rodliffe, R.S.

1983-08-01

In some PWR fault conditions, such as stuck open safety relief valve in the secondary circuit or main steam line break, the release of fission products to the atmosphere may be increased by the leakage of primary coolant into the secondary circuit following steam generator tube rupture. The release may be reduced by retention either within the primary circuit or within the affected steam generator unit (SGU). The mechanisms leading to retention are reviewed and quantified where possible. The parameters on which any analysis will be most critically dependent are identified. Fission product iodine and caesium may be retained in the secondary side of a SGU either by partition to retained water or by droplet deposition on surfaces and subsequent evaporation to dryness. Two extreme simplifications are considered: SGU 'dry', i.e. the secondary side is steam filled, and SGU 'wet', i.e. the tube bundle is covered with water. Consideration is given to: the distribution of fission products between gaseous and aerosol forms; mechanisms for droplet formation, deposition and resuspension; fission product retention during droplet or film evaporation primary coolant mixing and droplet scrubbing in a wet SGU; and the performance of moisture separators and steam driers. (author)

A TRMM/GPM retrieval of the total mean generator current for the global electric circuit

Science.gov (United States)

Peterson, Michael; Deierling, Wiebke; Liu, Chuntao; Mach, Douglas; Kalb, Christina

2017-09-01

A specialized satellite version of the passive microwave electric field retrieval algorithm (Peterson et al., 2015) is applied to observations from the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) satellites to estimate the generator current for the Global Electric Circuit (GEC) and compute its temporal variability. By integrating retrieved Wilson currents from electrified clouds across the globe, we estimate a total mean current of between 1.4 kA (assuming the 7% fraction of electrified clouds producing downward currents measured by the ER-2 is representative) to 1.6 kA (assuming all electrified clouds contribute to the GEC). These current estimates come from all types of convective weather without preference, including Electrified Shower Clouds (ESCs). The diurnal distribution of the retrieved generator current is in excellent agreement with the Carnegie curve (RMS difference: 1.7%). The temporal variability of the total mean generator current ranges from 110% on semi-annual timescales (29% on an annual timescale) to 7.5% on decadal timescales with notable responses to the Madden-Julian Oscillation and El Nino Southern Oscillation. The geographical distribution of current includes significant contributions from oceanic regions in addition to the land-based tropical chimneys. The relative importance of the Americas and Asia chimneys compared to Africa is consistent with the best modern ground-based observations and further highlights the importance of ESCs for the GEC.

Production of Biogas from wastes Blended with CowDung for Electricity generation-A Case study

Science.gov (United States)

Muthu, D.; Venkatasubramanian, C.; Ramakrishnan, K.; Sasidhar, Jaladanki

2017-07-01

The country’s production of solid waste generation is piling up year after year and the generation of Bio-Gas finds a fruitful solution to overcome this problem. This technology can contribute to energy conservation if the economic viability and social acceptance of this technology are favorable. Our campus has a number of hostel buildings which generates large quantum of kitchen waste and sewage per day. This research will have process ofcarrying out survey, characterization of kitchen waste from several kitchens & Canteens and knowing the potential for biogas production. The waste generated from kitchen and sewage from the hostels is given as feedstock to produce 600 m3 of biogas per day with cow dung as byproduct. The methane gas generated from Biogas is purified and this is used for power generation. Two biogas engine generators of 30 kVA and 50 kVA were installed. This power is used for backup power for girl’s hostel lighting load. From this study it is concluded that the generation of Biogas production and its usage for power production is the best option to handle these large quantum of sewage, kitchen waste generated from various buildings and also treated effluent from biogas plant and the biomass generated is a wealth for doing agriculture for any community ultimately it protects the environment.

Second generation bioethanol production from Saccharum spontaneum L. ssp. aegyptiacum (Willd.) Hack.

Science.gov (United States)

Danilo Scordia; Salvatore L. Consentino; Thomas W. Jeffries

2010-01-01

Saccharum (Saccharum spontaneum L. ssp. aegyptiacum (Willd.) Hack.), is a rapidly growing, wide ranging high-yield perennial, suitable for second generation bioethanol production. This study evaluated oxalic acid as a pretreatment for bioconversion. Overall sugar yields, sugar degradation products, enzymatic glucan hydrolysis and ethanol production were studied as...

Second generation biofuels: Economics and policies

International Nuclear Information System (INIS)

Carriquiry, Miguel A.; Du Xiaodong; Timilsina, Govinda R.

2011-01-01

This study reviews economics of production of second generation biofuels from various feedstocks, including crop and wood/forestry residues, lignocellulosic energy crops, jatropha, and algae. The study indicates that while second generation biofuels could significantly contribute to the future energy supply mix, cost is a major barrier to its commercial production in the near to medium term. Depending upon type of biofuels, feedstock prices and conversion costs, the cost of cellulosic ethanol is found to be two to three times higher than the current price of gasoline on an energy equivalent basis. The median cost (across the studies reviewed) of biodiesel produced from microalgae, a prospective feedstock, is seven times higher than the current price of diesel, although much higher cost estimates have been reported. As compared with the case of first generation biofuels, in which feedstock can account for over two-thirds of the total costs, the share of feedstock in the total costs is relatively lower (30-50%) in the case of second generation biofuels. While significant cost reductions are needed for both types of second generation biofuels, the critical barriers are at different steps of the production process. For cellulosic ethanol, the biomass conversion costs needs to be reduced. On the other hand, feedstock cost is the main issue for biodiesel. At present, policy instruments, such as fiscal incentives and consumption mandates have in general not differentiated between the first and second generation biofuels except in the cases of the US and EU. The policy regime should be revised to account for the relative merits of different types of biofuels. - Highlights: → Second generation biofuels could significantly contribute to the future energy supply mix. → Cost is a major barrier to its the commercial production in the near to medium term. → The policy regime should be revised to account for the relative merits of different biofuels.

Second generation biofuels: Economics and policies

Energy Technology Data Exchange (ETDEWEB)

Carriquiry, Miguel A., E-mail: miguelc@iastate.edu [Center for Agricultural and Rural Development, Iowa State University (United States); Du Xiaodong, E-mail: xdu23@wisc.edu [Department of Agricultural and Applied Economics, University of Wisconsin-Madison (United States); Timilsina, Govinda R., E-mail: gtimilsina@worldbank.org [Development Research Group, The World Bank (United States)

2011-07-15

This study reviews economics of production of second generation biofuels from various feedstocks, including crop and wood/forestry residues, lignocellulosic energy crops, jatropha, and algae. The study indicates that while second generation biofuels could significantly contribute to the future energy supply mix, cost is a major barrier to its commercial production in the near to medium term. Depending upon type of biofuels, feedstock prices and conversion costs, the cost of cellulosic ethanol is found to be two to three times higher than the current price of gasoline on an energy equivalent basis. The median cost (across the studies reviewed) of biodiesel produced from microalgae, a prospective feedstock, is seven times higher than the current price of diesel, although much higher cost estimates have been reported. As compared with the case of first generation biofuels, in which feedstock can account for over two-thirds of the total costs, the share of feedstock in the total costs is relatively lower (30-50%) in the case of second generation biofuels. While significant cost reductions are needed for both types of second generation biofuels, the critical barriers are at different steps of the production process. For cellulosic ethanol, the biomass conversion costs needs to be reduced. On the other hand, feedstock cost is the main issue for biodiesel. At present, policy instruments, such as fiscal incentives and consumption mandates have in general not differentiated between the first and second generation biofuels except in the cases of the US and EU. The policy regime should be revised to account for the relative merits of different types of biofuels. - Highlights: > Second generation biofuels could significantly contribute to the future energy supply mix. > Cost is a major barrier to its the commercial production in the near to medium term. > The policy regime should be revised to account for the relative merits of different biofuels.

Generating Community, Generating Justice? The production and circulation of value in community energy initiatives

Directory of Open Access Journals (Sweden)

Taylor Chase Dotson

2016-12-01

Full Text Available In this paper, we explore the potentialities and interconnections between existing and hypothetical community energy systems and the concept of generative justice. New York State’s more recent official energy plan, for instance, includes provisions for community-scale microgrids, and several European nations offer significant financial support to citizens interested in building micro and intermediate-scale renewable energy systems. Such efforts and technologies appear to promise some degree of generative justice, returning much of the value generated by distributed renewable energy back to the community producing it. However, most currently conceived and implemented community energy systems recirculate value in very narrow and limited ways. Building upon an analysis of New York energy policy and on-the-ground cases, we explore community energy’s potential. What kinds of value are being generated by community energy systems and for whom? How could such efforts be more generative of justice across a broad range of values, not just electrons and dollars? Through the attempt to broaden thinking not only about community energy systems but also the concept of generative justice, we connect technological and organizational configurations of community energy systems and the forms of value they have the potential to generate: including, the production of grassroots energy and organizational expertise, the capacity for local and personal autonomy in energy planning and decision-making, and the enhancement of an affective sense and embodied experience of community. Finally, we examine some of the barriers to realizing more generatively just community energy systems. 

Properties of Douglas Point Generating Station heat transport corrosion products

International Nuclear Information System (INIS)

Montford, B.; Rummery, T.E.

1975-09-01

Chemical, radiochemical and structural properties of circulating and fixed corrosion products from the Douglas Point Generating Station are documented. Interaction of Monel-400 and carbon steel corrosion products is described, and the mechanisms of Monel-400 surface deposit release, and activity buildup in the coolant system, are briefly discussed. Efficiencies of filters and ion-exchangers for the removal of released radionuclides are given. (author)

Surgical waste audit of 5 total knee arthroplasties.

Science.gov (United States)

Stall, Nathan M; Kagoma, Yoan M; Bondy, Jennifer N; Naudie, Douglas

2013-04-01

Operating rooms (ORs) are estimated to generate up to one-third of hospital waste. At the London Health Sciences Centre, prosthetics and implants represent 17% of the institution's ecological footprint. To investigate waste production associated with total knee arthroplasties (TKAs), we performed a surgical waste audit to gauge the environmental impact of this procedure and generate strategies to improve waste management. We conducted a waste audit of 5 primary TKAs performed by a single surgeon in February 2010. Waste was categorized into 6 streams: regular solid waste, recyclable plastics, biohazard waste, laundered linens, sharps and blue sterile wrap. Volume and weight of each stream was quantified. We used Canadian Joint Replacement Registry data (2008-2009) to estimate annual weight and volume totals of waste from all TKAs performed in Canada. The average surgical waste (excluding laundered linens) per TKA was 13.3 kg, of which 8.6 kg (64.5%) was normal solid waste, 2.5 kg (19.2%) was biohazard waste, 1.6 kg (12.1%) was blue sterile wrap, 0.3 kg (2.2%) was recyclables and 0.3 kg (2.2%) was sharps. Plastic wrappers, disposable surgical linens and personal protective equipment contributed considerably to total waste. We estimated that landfill waste from all 47 429 TKAs performed in Canada in 2008-2009 was 407 889 kg by weight and 15 272 m3 by volume. Total knee arthroplasties produce substantial amounts of surgical waste. Environmentally friendly surgical products and waste management strategies may allow ORs to reduce the negative impacts of waste production without compromising patient care. Level IV, case series.

Optimal localisation of next generation Biofuel production in Sweden

Energy Technology Data Exchange (ETDEWEB)

Wetterlund, Elisabeth [Linkoeping Univ., Linkoeping (Sweden); Pettersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden); Mossberg, Johanna [SP Technical Research Inst. of Sweden, Boraas (Sweden)] [and others

2013-09-01

With a high availability of lignocellulosic biomass and various types of cellulosic by-products, as well as a large number of industries, Sweden is a country of great interest for future large scale production of sustainable, next generation biofuels. This is most likely also a necessity as Sweden has the ambition to be independent of fossil fuels in the transport sector by the year 2030 and completely fossil free by 2050. In order to reach competitive biofuel production costs, plants with large production capacities are likely to be required. Feedstock intake capacities in the range of about 1-2 million tonnes per year, corresponding to a biomass feed of 300-600 MW, can be expected, which may lead to major logistical challenges. To enable expansion of biofuel production in such large plants, as well as provide for associated distribution requirements, it is clear that substantial infrastructure planning will be needed. The geographical location of the production plant facilities is therefore of crucial importance and must be strategic to minimise the transports of raw material as well as of final product. Competition for the available feedstock, from for example forest industries and CHP plants (combined heat and power) further complicates the localisation problem. Since the potential for an increased biomass utilisation is limited, high overall resource efficiency is of great importance. Integration of biofuel production processes in existing industries or in district heating systems may be beneficial from several aspects, such as opportunities for efficient heat integration, feedstock and equipment integration, as well as access to existing experience and know-how. This report describes the development of Be Where Sweden, a geographically explicit optimisation model for localisation of next generation biofuel production plants in Sweden. The main objective of developing such a model is to be able to assess production plant locations that are robust to varying

THE ROMANIAN YOUNG GENERATION'S WILLINGNESS TO CONSUME GREEN HOSPITALITY PRODUCTS

Directory of Open Access Journals (Sweden)

CODRUȚA ADINA BĂLTESCU

2017-06-01

Full Text Available The hospitality industry generates environmental degradation through the construction of buildings, waste disposal, and water usage. Nowadays, a large number of customers show increased environmental awareness, being willing to pay more for environmentally friendly products/services. In Romania institutional arrangements to generate awareness of the necessity of sustainable development were numerous, exemplifying in this respect the actions carried out by the Ministry of Environment and Sustainable Development for introducing the european eco-label for tourist accommodation services and the camping services, as well as for promoting the use of the eco-label in Romania among interested hotels and guesthouses. Based on these aspects, the article presents the results of a quantitative marketing research conducted among the young generation from Brașov county. The main objectives of the research consist in identifying the level of information among Romanian young consumers of accommodation services from Brasov county regarding the eco-certification and environmental management systems applied in the Romanian hospitality industry and, also, to identify their intentions to consume the green accommodation products.

The Live Access Server Scientific Product Generation Through Workflow Orchestration

Science.gov (United States)

Hankin, S.; Calahan, J.; Li, J.; Manke, A.; O'Brien, K.; Schweitzer, R.

2006-12-01

The Live Access Server (LAS) is a well-established Web-application for display and analysis of geo-science data sets. The software, which can be downloaded and installed by anyone, gives data providers an easy way to establish services for their on-line data holdings, so their users can make plots; create and download data sub-sets; compare (difference) fields; and perform simple analyses. Now at version 7.0, LAS has been in operation since 1994. The current "Armstrong" release of LAS V7 consists of three components in a tiered architecture: user interface, workflow orchestration and Web Services. The LAS user interface (UI) communicates with the LAS Product Server via an XML protocol embedded in an HTTP "get" URL. Libraries (APIs) have been developed in Java, JavaScript and perl that can readily generate this URL. As a result of this flexibility it is common to find LAS user interfaces of radically different character, tailored to the nature of specific datasets or the mindset of specific users. When a request is received by the LAS Product Server (LPS -- the workflow orchestration component), business logic converts this request into a series of Web Service requests invoked via SOAP. These "back- end" Web services perform data access and generate products (visualizations, data subsets, analyses, etc.). LPS then packages these outputs into final products (typically HTML pages) via Jakarta Velocity templates for delivery to the end user. "Fine grained" data access is performed by back-end services that may utilize JDBC for data base access; the OPeNDAP "DAPPER" protocol; or (in principle) the OGC WFS protocol. Back-end visualization services are commonly legacy science applications wrapped in Java or Python (or perl) classes and deployed as Web Services accessible via SOAP. Ferret is the default visualization application used by LAS, though other applications such as Matlab, CDAT, and GrADS can also be used. Other back-end services may include generation of Google

Forecast of power generation and heat production from renewable energy sources

Directory of Open Access Journals (Sweden)

Pydych Tadeusz

2017-01-01

Full Text Available The share of renewable energy sources (RES in the end use of energy in the UE will increase from the present level of about 25% to 50 % in 2030 according to the assumptions of the European Commission. In Poland the RES Act was passed in 2015. The act defines mechanisms and instruments for supporting the production of electricity and heat from renewable energy sources. Statistics (2003–2014 of electricity generation and heat production from RES in Poland were used in the research. Because of amendments to regulations connected with promoting RES and the emissions trading system (ETS as well as the uncertainty associated with further directions of the energy and environmental policy, generation of electricity and heat based on the use of RES must be modelled while taking risk into account. A number of dynamic processes incorporating random events may be modelled by stochastic equations using Ito calculus. By applying Euler’s method to solve stochastic differential equations (SDE, it is possible to simulate the development of the use of renewable energy carriers in electricity generation and heat production in the future.

IRREVERSIBILITY GENERATION IN SUGAR, ALCOHOL AND BIOGAS INTEGRATED PRODUCTIONS

Directory of Open Access Journals (Sweden)

Meilyn González Cortés

2017-01-01

Full Text Available In this work, the stages of losses and lower exergetic efficiency are determined when the sugar production process is integrated with others for the production of products such as biogas, torula yeast and electricity. The study is carried out in three scenarios of integrated processes for obtaining the indicated products. A sugar factory in which sugar and electricity are produced is considered as the base scenario and from this; a second scenario is inferred in which alcohol is produced from the molasses of the sugar process and biogas from the vinasse of the alcohol distillation process. Finally, a third scenario is exergetically evaluated in which sugar, electricity, biogas and alcohol are produced, but this last one from juices and molasses of the sugar process. For the exergetic analysis the integrated scheme was divided into 8 subsystems. From the analysis of results, the major subsystems that generate irreversibilities are: cogeneration (64.36-65.98%, juice extraction (8.85-9.85%, crystallization and cooking, (8.48 -9.02%, fermentation (4.12-4.94% and distillation (2.74-3.2%. Improvements are proposed to minimize irreversibilities, including the thermal integration of processes, technological modifications in the fermentation process and the introduction of more efficient equipment for the generation of electricity. The exergetic efficiency is between 78.95-81.10%, obtaining greater exergetic efficiency in the scheme of joint operation to produce sugar, alcohol and biogas.

DWBA differential and total pair production cross sections for intermediate energy photons

International Nuclear Information System (INIS)

Selvaraju, C.; Bhullar, A.S.; Sud, K.K.

2001-01-01

We present in this communication the theoretical differential and total cross section for electron-positron pair creation by intermediate energy photons (5.0-10.0 MeV) on different targets (Z=1, 30, 50, 68, 82 and 92). The computed cross sections are in distorted wave Born approximation (DWBA) in point Coulomb potential. The database of the differential and total pair production cross sections is presented in tabulated as well as in graphical form and the interpolation of differential cross sections for different atomic numbers, positron and photon energies is discussed

The Impact of the Subsidy Policy on Total Factor Productivity: An Empirical Analysis of China's Cotton Production

Directory of Open Access Journals (Sweden)

Yanwen Tan

2013-01-01

Full Text Available This paper develops one model to explore the relationship between the subsidy policy and the agricultural total factor productivity (TFP. It indicates that the agricultural TFP will be lower after the subsidy policy is implemented and there exists a negative relation between the subsidy and TFP, if subsidies are associated with the acreage. Using Malmquist index, this paper measures the changes of TFP in China's cotton production before and after the subsidy policy is implemented. The results verify that the subsidy policy could not increase but decrease the TFP of China's cotton production, not only in the whole country but also in major provinces of China. Based on the positive study, some policy implications are provided in the end of this paper.

Ethanol generation, oxidation and energy production in a cooperative bioelectrochemical system.

Science.gov (United States)

Pagnoncelli, Kamila C; Pereira, Andressa R; Sedenho, Graziela C; Bertaglia, Thiago; Crespilho, Frank N

2018-08-01

Integrating in situ biofuel production and energy conversion into a single system ensures the production of more robust networks as well as more renewable technologies. For this purpose, identifying and developing new biocatalysts is crucial. Herein, is reported a bioelectrochemical system consisting of alcohol dehydrogenase (ADH) and Saccharomyces cerevisiae, wherein both function cooperatively for ethanol production and its bioelectrochemical oxidation. Here, it is shown that it is possible to produce ethanol and use it as a biofuel in a tandem manner. The strategy is to employ flexible carbon fibres (FCF) electrode that could adsorb both the enzyme and the yeast cells. Glucose is used as a substrate for the yeast for the production of ethanol, while the enzyme is used to catalyse the oxidation of ethanol to acetaldehyde. Regarding the generation of reliable electricity based on electrochemical systems, the biosystem proposed in this study operates at a low temperature and ethanol production is proportional to the generated current. With further optimisation of electrode design, we envision the use of the cooperative biofuel cell for energy conversion and management of organic compounds. Copyright © 2018 Elsevier B.V. All rights reserved.

The production of *sp81m*Kr generators at the Oslo cyclotron

International Nuclear Information System (INIS)

Bjroenstad, T.; Holtebekk, T.; Ruud, A.

1984-01-01

The techniques developed for the production of *sp81m*Kr(13s) ventilation generators at the Oslo cyclotron are described. The procedure is based on the reaction *sp82*Kr(p,2n)*sp81*Rb using krypton gas of natural composition as target. The target chamber is designed for a gas pressure of 10 bar. The production unit is dimensioned for a parallel production of five generators, but this number may easily be increased. Attention is drawn to the fact that *sp81m*Rb(31 min) is produced in about the same amount as the *sp81*Rb (4.57 h) ground state. The consequences for the calibration procedure is discussed. Routine production has been exerted without major difficulties for nearly 1.5 years. The procedure has proven to be inexpensive and reliable. (Auth.)

RESULTS OF THE TECHNICAL AND ECONOMIC FEASIBILITY ANALYSIS FOR A NOVEL BIOMASS GASIFICATION-BASED POWER GENERATION SYSTEM FOR THE FOREST PRODUCTS INDUSTRY

Energy Technology Data Exchange (ETDEWEB)

Bruce Bryan; Joseph Rabovitser; Sunil Ghose; Jim Patel

2003-11-01

In 2001, the Gas Technology Institute (GTI) entered into Cooperative Agreement DE-FC26-01NT41108 with the U.S. Department of Energy (DOE) for an Agenda 2020 project to develop an advanced biomass gasification-based power generation system for near-term deployment in the Forest Products Industry (FPI). The advanced power system combines three advanced components, including biomass gasification, 3-stage stoker-fired combustion for biomass conversion, and externally recuperated gas turbines (ERGTs) for power generation. The primary performance goals for the advanced power system are to provide increased self-generated power production for the mill and to increase wastewood utilization while decreasing fossil fuel use. Additional goals are to reduce boiler NOx and CO{sub 2} emissions. The current study was conducted to determine the technical and economic feasibility of an Advanced Power Generation System capable of meeting these goals so that a capital investment decision can be made regarding its implementation at a paper mill demonstration site in DeRidder, LA. Preliminary designs and cost estimates were developed for all major equipment, boiler modifications and balance of plant requirements including all utilities required for the project. A three-step implementation plan was developed to reduce technology risk. The plant design was found to meet the primary objectives of the project for increased bark utilization, decreased fossil fuel use, and increased self-generated power in the mill. Bark utilization for the modified plant is significantly higher (90-130%) than current operation compared to the 50% design goal. For equivalent steam production, the total gas usage for the fully implemented plant is 29% lower than current operation. While the current average steam production from No.2 Boiler is about 213,000 lb/h, the total steam production from the modified plant is 379,000 lb/h. This steam production increase will be accomplished at a grate heat release rate

Introduction of total productive maintenance in steelworks plants

Directory of Open Access Journals (Sweden)

B. Gajdzik

2009-04-01

Full Text Available The paper presents the concept of TPM - Total Productive Maintenance and its basic method 5S (sort, systematize, sweep, sanitize, self-discipline. The new management concept is realized in Japanese and USA companies. On the Polish market the methods was adopted in the first years of 21st century by car manufacturers and household equipment producers. Nowadays the concept is tested by steelworks in Polish steel industry. The process of introduction of these methods is long, difficult and requires organizational and technical changes. The companies which realize Awareness Management Project of workers in Health and Safety System use other methods whose primary goal is to ensure objectivity and comparability of results and skill assessment of particular employees (the Current and Periodic Assessment System for worker and supervision positions.

A review on the current status and production technology for {sup 188}W-{sup 188}Re generator system

Energy Technology Data Exchange (ETDEWEB)

Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M

1998-11-01

The current status of {sup 188}W-{sup 188}Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of {sup 188}W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced {sup 188}W-{sup 188}Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of {sup 188}W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of {sup 186}W enriched sample, {sup 188}W-{sup 188}Re generator production experiments were performed to evaluate the possibility of {sup 188}W-{sup 188}Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical {sup 188}W-{sup 188}Re generator production using of low-specific activity {sup 188}W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs.

DATA ISSUES IN TOTAL FACTOR PRODUCTIVITY BENCHMARKING: A CENTRAL EUROPEAN PERSPECTIVE

Directory of Open Access Journals (Sweden)

Machek Ondrej

2012-12-01

Full Text Available Total factor productivity is a method of measuring overall productivity of businesses, industries or economies. It is an approach which is recently becoming popular among government regulatory agencies when applying the so-called performance-based regulation. This principle induces regulated companies (for instance, electricity or natural gas distributors to behave efficiently even if their industries are not exposed to competitive pressures, since they are rewarded for being more productive than other firms in the industry, and penalized in the opposite case. The aim of this article is to deal with the question what are the main data issues when comparing total factor productivity among firms or industries with focus on the Central European region, which is very heterogeneous in terms of geographic, social, economic and historic conditions. In the first part, we introduce total factor productivity and the most common methods of its measurement � Malmquist and T�rnqvist indexes. Consequently, we divide the data issues into separate categories and discuss them more in detail. The first category of issues is related to defining the set of comparable firms. Many factors, such as the degree of competition in the market, the extent of government regulation, economies of scale, firm size, geographical conditions and historic development have to be taken into consideration. The second category is associated with specifying the time period. TFP estimates should be based on long time series and the period should include the whole business cycle and be representative and exclude extraordinary events. The third group of issues is related to defining and measuring the inputs and outputs. Since a number of difficulties are associated with labor input measurement, it is often included into operating expenditures along with materials and services. The measurement of capital is even more contentious. The outputs should reflect performance

Multi-generation chemical aging of α-pinene ozonolysis products by reactions with OH

Directory of Open Access Journals (Sweden)

N. Wang

2018-03-01

Full Text Available Secondary organic aerosol (SOA formation from volatile organic compounds (VOCs in the atmosphere can be thought of as a succession of oxidation steps. The production of later-generation SOA via continued oxidation of the first-generation products is defined as chemical aging. This study investigates aging in the α-pinene ozonolysis system with hydroxyl radicals (OH through smog chamber experiments. The first-generation α-pinene ozonolysis products were allowed to react further with OH formed via HONO photolysis. After an equivalent of 2–4 days of typical atmospheric oxidation conditions, homogeneous OH oxidation of the α-pinene ozonolysis products resulted in a 20–40 % net increase in the SOA for the experimental conditions used in this work. A more oxygenated product distribution was observed after aging based on the increase in aerosol atomic oxygen-to-carbon ratio (O : C by up to 0.04. Experiments performed at intermediate relative humidity (RH of 50 % showed no significant difference in additional SOA formation during aging compared to those performed at a low RH of less than 20 %.

Estimating and decomposing productivity growth of the electricity generation industry in Malaysia: A stochastic frontier analysis

International Nuclear Information System (INIS)

See, Kok Fong; Coelli, Tim

2013-01-01

This study examines the total factor productivity (TFP) growth of the Malaysian electricity generation industry over the 1998 to 2005 period. The stochastic frontier analysis (SFA) approach is used to measure TFP change and decompose TFP growth into efficiency change and technical progress. We find that it achieved average annual TFP growth of 2.34%, with technical change contributing the most to the TFP growth over the eight year period. We hence hypothesise that the new power plants with their newer capital-embodied technologies commencing during the sample period are likely to be the main reason for this strong technical change. In addition, it is also noted that this estimate for the Malaysian electricity generation industry is larger than the estimate obtained for the electricity sector as a whole, where we obtain 1.34% per year for a comparable period. -- Highlights: •This is the first empirical study that examines the TFP growth of the Malaysian electricity generation industry using the SFA method. •An average annual TFP change of the Malaysian electricity generation industry over eight years (1998-2005) has been achieved at 2.34% per year. •The technical progress contributing the most to the TFP growth and technical efficiency change and scale change making small contributions over the sample period

Evaluation of Bacteriological Quality of Ready-to-eat Chicken Products by Total Viable Count Method

OpenAIRE

Ramiz Raja; Asif Iqbal; Yasir Hafiz; Mehboob Willayet; Shakoor Bhat; Mudasir Rather

2012-01-01

The present investigation describes the total viable count of ready-to-eat chicken products (chicken patties and chicken rolls) in Srinagar city during two seasons viz. autumn and winter. A total of 120 ready-to-eat chicken products comprising of 60 chicken patties and 60 chicken rolls were tested. The mean bacterial count of 60 chicken patties and 60 chicken rolls was 5.1281 and 4.9395 log10 cfu/g. Bacillus cereus strains were isolated from 25 of chicken patties and 22 of the chicken rolls r...

Effects of marine and freshwater macroalgae on in vitro total gas and methane production.

Science.gov (United States)

Machado, Lorenna; Magnusson, Marie; Paul, Nicholas A; de Nys, Rocky; Tomkins, Nigel

2014-01-01

This study aimed to evaluate the effects of twenty species of tropical macroalgae on in vitro fermentation parameters, total gas production (TGP) and methane (CH4) production when incubated in rumen fluid from cattle fed a low quality roughage diet. Primary biochemical parameters of macroalgae were characterized and included proximate, elemental, and fatty acid (FAME) analysis. Macroalgae and the control, decorticated cottonseed meal (DCS), were incubated in vitro for 72 h, where gas production was continuously monitored. Post-fermentation parameters, including CH4 production, pH, ammonia, apparent organic matter degradability (OMd), and volatile fatty acid (VFA) concentrations were measured. All species of macroalgae had lower TGP and CH4 production than DCS. Dictyota and Asparagopsis had the strongest effects, inhibiting TGP by 53.2% and 61.8%, and CH4 production by 92.2% and 98.9% after 72 h, respectively. Both species also resulted in the lowest total VFA concentration, and the highest molar concentration of propionate among all species analysed, indicating that anaerobic fermentation was affected. Overall, there were no strong relationships between TGP or CH4 production and the >70 biochemical parameters analysed. However, zinc concentrations >0.10 g x kg(-1) may potentially interact with other biochemical components to influence TGP and CH4 production. The lack of relationship between the primary biochemistry of species and gas parameters suggests that significant decreases in TGP and CH4 production are associated with secondary metabolites produced by effective macroalgae. The most effective species, Asparagopsis, offers the most promising alternative for mitigation of enteric CH4 emissions.

Effects of marine and freshwater macroalgae on in vitro total gas and methane production.

Directory of Open Access Journals (Sweden)

Lorenna Machado

Full Text Available This study aimed to evaluate the effects of twenty species of tropical macroalgae on in vitro fermentation parameters, total gas production (TGP and methane (CH4 production when incubated in rumen fluid from cattle fed a low quality roughage diet. Primary biochemical parameters of macroalgae were characterized and included proximate, elemental, and fatty acid (FAME analysis. Macroalgae and the control, decorticated cottonseed meal (DCS, were incubated in vitro for 72 h, where gas production was continuously monitored. Post-fermentation parameters, including CH4 production, pH, ammonia, apparent organic matter degradability (OMd, and volatile fatty acid (VFA concentrations were measured. All species of macroalgae had lower TGP and CH4 production than DCS. Dictyota and Asparagopsis had the strongest effects, inhibiting TGP by 53.2% and 61.8%, and CH4 production by 92.2% and 98.9% after 72 h, respectively. Both species also resulted in the lowest total VFA concentration, and the highest molar concentration of propionate among all species analysed, indicating that anaerobic fermentation was affected. Overall, there were no strong relationships between TGP or CH4 production and the >70 biochemical parameters analysed. However, zinc concentrations >0.10 g x kg(-1 may potentially interact with other biochemical components to influence TGP and CH4 production. The lack of relationship between the primary biochemistry of species and gas parameters suggests that significant decreases in TGP and CH4 production are associated with secondary metabolites produced by effective macroalgae. The most effective species, Asparagopsis, offers the most promising alternative for mitigation of enteric CH4 emissions.

A draft plan for the routine production of PZC based 99mTc generator in the Vietnam

International Nuclear Information System (INIS)

Duong Van Dong

2007-01-01

This is an outline of the radioisotope production programme using a research reactor of 500 kW in Vietnam. Under the framework of Forum for Nuclear Cooperation in Asia (FNCA) cooperation program, the PZC based technology for production of 99m Tc-generator has been studied at Dalat Nuclear Research Institute (DNRI) as well as FNCA members countries in the past several years. The FNCA project has shown the feasibility of using a PZC column-reactor 99 Mo- 99m Tc-generator for commercial applications, citing mainly the cheaper cost of the PZC generator than the imported alumina column-fission 99 Mo generator and excellent technology achievement has been established and optimized by close cooperation between FNCA country members and KAKEN, JAERI. DNRI proposes in this draft business plan, the commercial production of PZC generator through the establishment of national project stage 2006-2008 for the routine production of 99 Mo- 99m Tc generator. In this national project the 99m Tc-generator will use PZC coming from KAKEN - Japan or locally synthesis as the column material, 99 Mo sourced from neighboring countries or irradiated at or reactor and the semi-automatic loading and adsorption machine will be studied, designed and installed in the hot cells available. Because the DNRI have facility 99m Tc-generator production line with two hot cells used production of the 99m Tc generator by using fission 99 Mo. The generator assembly will be designed and fabricated. (author)

Total Synthesis of Natural Products Using Hypervalent Iodine Reagents

Directory of Open Access Journals (Sweden)

Gaetan eMaertens

2015-01-01

Full Text Available We present a review of natural product syntheses accomplished in our laboratory during the last five years. Each synthetic route features a phenol dearomatization promoted by an environmentally benign hypervalent iodine reagent. The dearomatizations demonstrate the aromatic ring umpolung concept, and involve stereoselective remodeling of the inert unsaturations of a phenol into a highly functionalized key intermediate that may contain a quaternary carbon center and a prochiral dienone system. Several new oxidative strategies were employed, including transpositions (1,3-alkyl shift and Prins-pinacol, a polycyclization, an ipso rearrangement, and direct nucleophilic additions at the phenol para position. Several alkaloids, heterocyclic compounds, and a polycyclic core have been achieved, including sceletenone (a serotonin reuptake inhibitor, acetylaspidoalbidine (an antitumor agent, fortucine (antiviral and antitumor, erysotramidine (curare-like effect, platensimycin (an antibiotic, and the main core of a kaurane diterpene (immunosuppressive agent and stimulator of apoptosis. These concise and in some cases enantioselective syntheses effectively demonstrate the importance of hypervalent iodine reagents in the total synthesis of bioactive natural products.

Microbial production of next-generation stevia sweeteners

DEFF Research Database (Denmark)

Olsson, Kim; Carlsen, Simon; Semmler, Angelika

2016-01-01

BACKGROUND: The glucosyltransferase UGT76G1 from Stevia rebaudiana is a chameleon enzyme in the targeted biosynthesis of the next-generation premium stevia sweeteners, rebaudioside D (Reb D) and rebaudioside M (Reb M). These steviol glucosides carry five and six glucose units, respectively......, and have low sweetness thresholds, high maximum sweet intensities and exhibit a greatly reduced lingering bitter taste compared to stevioside and rebaudioside A, the most abundant steviol glucosides in the leaves of Stevia rebaudiana. RESULTS: In the metabolic glycosylation grid leading to production....... This screen made it possible to identify variants, such as UGT76G1Thr146Gly and UGT76G1His155Leu, which diminished accumulation of unwanted side-products and gave increased specific accumulation of the desired Reb D or Reb M sweeteners. This improvement in a key enzyme of the Stevia sweetener biosynthesis...

Minimising generation of acid whey during Greek yoghurt manufacturing.

Science.gov (United States)

Uduwerella, Gangani; Chandrapala, Jayani; Vasiljevic, Todor

2017-08-01

Greek yoghurt, a popular dairy product, generates large amounts of acid whey as a by-product during manufacturing. Post-processing treatment of this stream presents one of the main concerns for the industry. The objective of this study was to manipulate initial milk total solids content (15, 20 or 23 g/100 g) by addition of milk protein concentrate, thus reducing whey expulsion. Such an adjustment was investigated from the technological standpoint including starter culture performance, chemical and physical properties of manufactured Greek yoghurt and generated acid whey. A comparison was made to commercially available products. Increasing protein content in regular yoghurt reduced the amount of acid whey during whey draining. This protein fortification also enhanced the Lb. bulgaricus growth rate and proteolytic activity. Best structural properties including higher gel strength and lower syneresis were observed in the Greek yoghurt produced with 20 g/100 g initial milk total solid compared to manufactured or commercially available products, while acid whey generation was lowered due to lower drainage requirement.

Process Alternatives for Second Generation Ethanol Production from Sugarcane Bagasse

DEFF Research Database (Denmark)

F. Furlan, Felipe; Giordano, Roberto C.; Costa, Caliane B. B.

2015-01-01

on the economic feasibility of the process. For the economic scenario considered in this study, using bagasse to increase ethanol production yielded higher ethanol production costs compared to using bagasse for electric energy production, showing that further improvements in the process are still necessary.......In ethanol production from sugarcane juice, sugarcane bagasse is used as fuel for the boiler, to meet the steam and electric energy demand of the process. However, a surplus of bagasse is common, which can be used either to increase electric energy or ethanol production. While the first option uses...... already established processes, there are still many uncertainties about the techno-economic feasibility of the second option. In this study, some key parameters of the second generation ethanol production process were analyzed and their influence in the process feasibility assessed. The simulated process...

Supply chain optimization of sugarcane first generation and eucalyptus second generation ethanol production in Brazil

NARCIS (Netherlands)

Jonker, J. G G; Junginger, H. M.; Verstegen, J. A.; Lin, T.; Rodríguez, L. F.; Ting, K. C.; Faaij, A. P C; van der Hilst, F.

2016-01-01

The expansion of the ethanol industry in Brazil faces two important challenges: to reduce total ethanol production costs and to limit the greenhouse gas (GHG) emission intensity of the ethanol produced. The objective of this study is to economically optimize the scale and location of ethanol

Energy management for cost reduction in the production. TEEM - Total Energy Efficiency Management; Energiemanagement zur Kostensenkung in der Produktion. TEEM - Total Energy Efficiency Management

Energy Technology Data Exchange (ETDEWEB)

Westkaemper, Engelbert; Verl, Alexander (eds.)

2009-07-01

Within the workshop of the Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Stuttgart, Federal Republic of Germany) at 6th October, 2009, in Stuttgart the following lectures were held: (1) Presentation of Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Engelbert Westkaemper); (2) TEEM - Total Energy Efficiency Management - ''With energy management to an energy efficient production'' (Alexander Schloske); (3) DIN EN 16001 Introduction of an energy management system - utilization and advantages for companies (Sylvia Wahren); (4) Analysis of the energy efficiency with power flow - Support and implementation at factory planning and optimization of production (Klaus Erlach); (5) Total Energy Efficiency Management - Approaches at the company Kaercher in injection moulding for example (Axel Leschtar); (6) Modelling the embodied product energy (Shahin Rahimifard); (7) Acquisition of energy data in the production - Technologies and possibilities (Joachim Neher); (8) Active energy management by means of an ''energy control centre'' - Analysis of the real situation and upgrading measures in the production using coating plants as an example (Wolfgang Klein); (9) Visualisation and simulation of energy values in the digital factory (Carmen Constantinescu, Axel Bruns).

Thermodynamic analysis of a solar-based multi-generation system with hydrogen production

International Nuclear Information System (INIS)

Ozturk, Murat; Dincer, Ibrahim

2013-01-01

Thermodynamic analysis of a renewable-based multi-generation energy production system which produces a number of outputs, such as power, heating, cooling, hot water, hydrogen and oxygen is conducted. This solar-based multi-generation system consists of four main sub-systems: Rankine cycle, organic Rankine cycle, absorption cooling and heating, and hydrogen production and utilization. Exergy destruction ratios and rates, power or heat transfer rates, energy and exergy efficiencies of the system components are carried out. Some parametric studies are performed in order to examine the effects of varying operating conditions (e.g., reference temperature, direct solar radiation and receiver temperature) on the exergy efficiencies of the sub-systems as well as the whole system. The solar-based multi-generation system which has an exergy efficiency of 57.35%, is obtained to be higher than using these sub-systems separately. The evaluation of the exergy efficiency and exergy destruction for the sub-systems and the overall system show that the parabolic dish collectors have the highest exergy destruction rate among constituent parts of the solar-based multi-generation system, due to high temperature difference between the working fluid and collector receivers. -- Highlights: ► Development of a new multi-generation system for solar-based hydrogen production. ► Investigation of exergy efficiencies and destructions in each process of the system. ► Evaluation of varying operating conditions on the exergy destruction and efficiency

Wind electric power generation

International Nuclear Information System (INIS)

Koch, M. K.; Wind, L.; Canter, B.; Moeller, T.

2002-01-01

The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 2000 and 2001. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (SM)

Wind electric power generation

International Nuclear Information System (INIS)

Koch, M.K.; Wind, L.; Canter, B.; Moeller, T.

2001-01-01

The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1999 and 2000. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (CLS)

A blueprint paradox: Successful but unintended cross-national translation of total productive maintenance

OpenAIRE

Rolfsen, Monica

2014-01-01

Purpose – The purpose of this paper is to investigate if a manufacturing concept such as total productive maintenance (TPM) can be copied from one location to another. Design/methodology/approach – Qualitative data were gathered from a single case. This includes interviews, participatory observation and document collection. Findings – The authors present a company with an intention to make a pure copy from one location to another, and with identical technology, production equ...

Production of the next-generation library virtual tour

Science.gov (United States)

Duncan, James M.; Roth, Linda K.

2001-01-01

While many libraries offer overviews of their services through their Websites, only a small number of health sciences libraries provide Web-based virtual tours. These tours typically feature photographs of major service areas along with textual descriptions. This article describes the process for planning, producing, and implementing a next-generation virtual tour in which a variety of media elements are integrated: photographic images, 360-degree “virtual reality” views, textual descriptions, and contextual floor plans. Hardware and software tools used in the project are detailed, along with a production timeline and budget, tips for streamlining the process, and techniques for improving production. This paper is intended as a starting guide for other libraries considering an investment in such a project. PMID:11837254

Determination of total mercury and methylmercury in biological samples by photochemical vapor generation

Energy Technology Data Exchange (ETDEWEB)

Vieira, Mariana A.; Ribeiro, Anderson S.; Curtius, Adilson J. [Universidade Federal de Santa Catarina, Departamento de Quimica, Florianopolis, SC (Brazil); Sturgeon, Ralph E. [National Research Council Canada, Institute for National Measurement Standards, Ottawa, ON (Canada)

2007-06-15

Cold vapor atomic absorption spectrometry (CV-AAS) based on photochemical reduction by exposure to UV radiation is described for the determination of methylmercury and total mercury in biological samples. Two approaches were investigated: (a) tissues were digested in either formic acid or tetramethylammonium hydroxide (TMAH), and total mercury was determined following reduction of both species by exposure of the solution to UV irradiation; (b) tissues were solubilized in TMAH, diluted to a final concentration of 0.125% m/v TMAH by addition of 10% v/v acetic acid and CH{sub 3}Hg{sup +} was selectively quantitated, or the initial digests were diluted to 0.125% m/v TMAH by addition of deionized water, adjusted to pH 0.3 by addition of HCl and CH{sub 3}Hg{sup +} was selectively quantitated. For each case, the optimum conditions for photochemical vapor generation (photo-CVG) were investigated. The photochemical reduction efficiency was estimated to be {proportional_to}95% by comparing the response with traditional SnCl{sub 2} chemical reduction. The method was validated by analysis of several biological Certified Reference Materials, DORM-1, DORM-2, DOLT-2 and DOLT-3, using calibration against aqueous solutions of Hg{sup 2+}; results showed good agreement with the certified values for total and methylmercury in all cases. Limits of detection of 6 ng/g for total mercury using formic acid, 8 ng/g for total mercury and 10 ng/g for methylmercury using TMAH were obtained. The proposed methodology is sensitive, simple and inexpensive, and promotes ''green'' chemistry. The potential for application to other sample types and analytes is evident. (orig.)

Influence of organic loading rate on methane production in a CSTR from physicochemical sludge generated in a poultry slaughterhouse.

Science.gov (United States)

López-Escobar, Luis A; Martínez-Hernández, Sergio; Corte-Cano, Grisel; Méndez-Contreras, Juan M

2014-01-01

The influence of the increase of the organic loading rate (OLR) on methane production in a continuous stirred-tank reactor (CSTR) from physicochemical sludge generated in a poultry slaughterhouse was evaluated. Total solid (TS) to obtain OLR of 1, 5, 10 and 15 g VS L(-1) day(-1), with hydraulic retention times of 29, 6, 6 and 4, respectively, were conditioned. The results showed a decrease in pH levels and an increase in the theoretical volatile fatty acids (VFA). While the yield of methane production decreased from 0.48 to 0.10 LCH4/g VSremoved, respectively, the OLR-10 managed on average 38% removal of volatile solids (VS) and a yield biogas production of 0.81 Lbiogas g(-1) VSremoved and 1.35 L day(-1). This suggests that the OLR increases in an anaerobic system from physicochemical sludge only inhibits the methanogenic metabolism, because there is still substrate consumption and biogas production.

Threshold resummation and the total cross section for top quark production

International Nuclear Information System (INIS)

Berger, E.L.; Contopanagos, H.

1997-01-01

We discuss the motivation for resummation of the effects of initial-state soft gluon radiation, to all orders in the strong coupling strength, for processes in which the near-threshold region in the partonic subenergy is important. We summarize our calculation of the total cross section for top quark production at hadron colliders. Comments are included on the differences between our treatment of subleading logarithmic terms and other methods

Total 2004 results

International Nuclear Information System (INIS)

2005-02-01

This document presents the 2004 results of Total Group: consolidated account, special items, number of shares, market environment, adjustment for amortization of Sanofi-Aventis merger-related intangibles, 4. quarter 2004 results (operating and net incomes, cash flow), upstream (results, production, reserves, recent highlights), downstream (results, refinery throughput, recent highlights), chemicals (results, recent highlights), Total's full year 2004 results (operating and net income, cash flow), 2005 sensitivities, Total SA parent company accounts and proposed dividend, adoption of IFRS accounting, summary and outlook, main operating information by segment for the 4. quarter and full year 2004: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refined product sales by region, chemicals), Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

Penerapan Total Productive Maintenance dengan menggunakan metode OEE pada turbin uap Type C5 DS II – GVS

Directory of Open Access Journals (Sweden)

Joel Bastanta Perangin Angin

2018-01-01

Full Text Available Abstrak Secara harfiah, tidak ada barang ataupun benda buatan manusia yang tidak dapat rusak, mesin turbin uap misalnya. Namun kerusakan tersebut dapat dicegah dengan metode perawatan yang tepat demi masa pakai yang lebih lama. Penelitian ini menganalisis tentang penerapan Total Productive Maintenace (TPM pada mesin turbin uap untuk peningkatan produktivitas dengan menggunakan metode Overall Equipment Efectiveness (OEE di PT PP London Sumatera Indonesia, tbk. Didalam analisis TPM dengan menggunakan metode OEE ini ada terdapat enam penyebab kerugian yang disebut dengan Six Big Losses yaitu diantaranya : kerusakan peralatan, persiapan peralatan, gangguan kecil dan waktu nganggur, kecepatan rendah, cacat produk dalam proses, hasil rendah.Kesimpulan yang didapat adalah nilai rata – rata OEE selama tahun 2015 adalah 65,08 % masih dibawah standar. Nilai gangguan kecil dan waktu nganggur 85,44 % dengan total waktu 2449,54 jam, hasilCacat produk dalam proses2,52 % dengan total waktu 72,12 jam, hasilKecepatan rendah 11,58 % dengan total waktu 331,88 jam, hasil Kerusakan peralatan0,38 % dengan total waktu 11 jam, hasil Persiapan peralatan 0,08 % dengan total waktu 2,41 jam, hasil Hasil rendah 0. Kata kunci: Total Productive Maintenance, Overall Equipment Effectiveness, Six Big Losses,Maintenance, Turbin Uap Abstract Generally, there is nothing properties hand made without damaging, steam turbine engines as an example. But the damage can be prevent by the precise method maintenance in the machines for the long life time. This study analyzes the application of Total Productive Maintenance (TPM at the steam turbine machinery to increase productivity by using the method Overall Equipment Effectiveness (OEE. In the analysis of TPM using OEE there are six causes of loss called Six Big Losses, such as: damage to equipment ( breakdown losses , preparation of equipment ( set- up and adjustment , disorders of the small and idle time ( idling and minor stoppages

A comparative study of Swedish generation Y decision-making style between high involvement and low involvement products.

OpenAIRE

Pakdeejirakul, Warangkhana; Agosi, Micheal

2013-01-01

Title A comparative study of Swedish generation Y decision-making style between high involvement and low involvement products. Research questions  How does product involvement influence consumer decision-making styles in Generation Y of Swedish nationals for the two selected products?  To what level does the model proposed by Sproles and Kendall in 1986 now apply to the modern-day Generation Y in Sweden as they decide on both of the selected products? Purpose The purpose of this research unde...

Second generation γ-secretase modulators exhibit different modulation of Notch β and Aβ production.

Science.gov (United States)

Wanngren, Johanna; Ottervald, Jan; Parpal, Santiago; Portelius, Erik; Strömberg, Kia; Borgegård, Tomas; Klintenberg, Rebecka; Juréus, Anders; Blomqvist, Jenny; Blennow, Kaj; Zetterberg, Henrik; Lundkvist, Johan; Rosqvist, Susanne; Karlström, Helena

2012-09-21

The γ-secretase complex is an appealing drug target when the therapeutic strategy is to alter amyloid-β peptide (Aβ) aggregation in Alzheimer disease. γ-Secretase is directly involved in Aβ formation and determines the pathogenic potential of Aβ by generating the aggregation-prone Aβ42 peptide. Because γ-secretase mediates cleavage of many substrates involved in cell signaling, such as the Notch receptor, it is crucial to sustain these pathways while altering the Aβ secretion. A way of avoiding interference with the physiological function of γ-secretase is to use γ-secretase modulators (GSMs) instead of inhibitors of the enzyme. GSMs modify the Aβ formation from producing the amyloid-prone Aβ42 variant to shorter and less amyloidogenic Aβ species. The modes of action of GSMs are not fully understood, and even though the pharmacology of GSMs has been thoroughly studied regarding Aβ generation, knowledge is lacking about their effects on other substrates, such as Notch. Here, using immunoprecipitation followed by MALDI-TOF MS analysis, we found that two novel, second generation GSMs modulate both Notch β and Aβ production. Moreover, by correlating S3-specific Val-1744 cleavage of Notch intracellular domain (Notch intracellular domain) to total Notch intracellular domain levels using immunocytochemistry, we also demonstrated that Notch intracellular domain is not modulated by the compounds. Interestingly, two well characterized, nonsteroidal anti-inflammatory drugs (nonsteroidal anti-inflammatory drug), R-flurbiprofen and sulindac sulfide, affect only Aβ and not Notch β formation, indicating that second generation GSMs and nonsteroidal anti-inflammatory drug-based GSMs have different modes of action regarding Notch processing.

Modeling Woody Biomass Procurement for Bioenergy Production at the Atikokan Generating Station in Northwestern Ontario, Canada

Directory of Open Access Journals (Sweden)

Thakur Upadhyay

2012-12-01

Full Text Available Efficient procurement and utilization of woody biomass for bioenergy production requires a good understanding of biomass supply chains. In this paper, a dynamic optimization model has been developed and applied to estimate monthly supply and procurement costs of woody biomass required for the Atikokan Generating Station (AGS in northwestern Ontario, based on its monthly electricity production schedule. The decision variables in the model are monthly harvest levels of two types of woody biomass, forest harvest residues and unutilized biomass, from 19,315 forest depletion cells (each 1 km2 for a one year planning horizon. Sixteen scenarios are tested to examine the sensitivity of the cost minimization model to changing economic and technological parameters. Reduction in moisture content and improvement of conversion efficiency showed relatively higher reductions in monthly and total costs of woody biomass feedstock for the AGS. The results of this study help in understanding and designing decision support systems for optimal biomass supply chains under dynamic operational frameworks.

Total 2004 results

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-02-01

This document presents the 2004 results of Total Group: consolidated account, special items, number of shares, market environment, adjustment for amortization of Sanofi-Aventis merger-related intangibles, 4. quarter 2004 results (operating and net incomes, cash flow), upstream (results, production, reserves, recent highlights), downstream (results, refinery throughput, recent highlights), chemicals (results, recent highlights), Total's full year 2004 results (operating and net income, cash flow), 2005 sensitivities, Total SA parent company accounts and proposed dividend, adoption of IFRS accounting, summary and outlook, main operating information by segment for the 4. quarter and full year 2004: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refined product sales by region, chemicals), Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance

Directory of Open Access Journals (Sweden)

B. Gajdzik

2014-04-01

Full Text Available The content of this publication consists of notions connected with Total Productive Maintenance (TPM in metallurgical enterprise. The basic areas of devices condition management through Autonomous and Professional Maintenance are described here. Mentioned areas of activities are performed in metallurgical enterprise ArcelorMittal Poland within pillars of World Class Manufacturing (WCM. The aims of UR programs are to maintain the basic functionality of the devices and decrease the number of failures in order to reach improvement of production efficiency.

The influence of total solids content and initial pH on batch biohydrogen production by solid substrate fermentation of agroindustrial wastes.

Science.gov (United States)

Robledo-Narváez, Paula N; Muñoz-Páez, Karla M; Poggi-Varaldo, Hector M; Ríos-Leal, Elvira; Calva-Calva, Graciano; Ortega-Clemente, L Alfredo; Rinderknecht-Seijas, Noemí; Estrada-Vázquez, Carlos; Ponce-Noyola, M Teresa; Salazar-Montoya, J Alfredo

2013-10-15

Hydrogen is a valuable clean energy source, and its production by biological processes is attractive and environmentally sound and friendly. In México 5 million tons/yr of agroindustrial wastes are generated; these residues are rich in fermentable organic matter that can be used for hydrogen production. On the other hand, batch, intermittently vented, solid substrate fermentation of organic waste has attracted interest in the last 10 years. Thus the objective of our work was to determine the effect of initial total solids content and initial pH on H2 production in batch fermentation of a substrate that consisted of a mixture of sugarcane bagasse, pineapple peelings, and waste activated sludge. The experiment was a response surface based on 2(2) factorial with central and axial points with initial TS (15-35%) and initial pH (6.5-7.5) as factors. Fermentation was carried out at 35 °C, with intermittent venting of minireactors and periodic flushing with inert N2 gas. Up to 5 cycles of H2 production were observed; the best treatment in our work showed cumulative H2 productions (ca. 3 mmol H2/gds) with 18% and 6.65 initial TS and pH, respectively. There was a significant effect of TS on production of hydrogen, the latter decreased with initial TS increase from 18% onwards. Cumulative H2 productions achieved in this work were higher than those reported for organic fraction of municipal solid waste (OFMSW) and mixtures of OFMSW and fruit peels waste from fruit juice industry, using the same process. Specific energetic potential due to H2 in our work was attractive and fell in the high side of the range of reported results in the open literature. Batch dark fermentation of agrowastes as practiced in our work could be useful for future biorefineries that generate biohydrogen as a first step and could influence the management of this type of agricultural wastes in México and other countries and regions as well. Copyright © 2013 Elsevier Ltd. All rights reserved.

Assessment of productivity at four generating plants

International Nuclear Information System (INIS)

Saarlas, M.; Nelson, M.

1976-01-01

The 1975 FEA study of power plant reliability was undertaken as a first step in improving the productivity of large (larger than 400 MW) generating units by attempting to trace outages to their root causes so that meaningful corrective action can be taken at the root of the problem. Trident Engineering Associates studied the operation, maintenance, management, and manning of two fossil-fueled and two nuclear-fueled units, one each of above average and one below average reliability (high availability and low forced outage rate). It was expected that the differences between a highly reliable unit and a less reliable unit would lead to recommendations which would be useful for improving productivity of units throughout the country. The findings are of two basic types: (1) general concepts covering problem areas, fundamental reasons and immediate symptoms behind the problems, methods used to eliminate or alleviate the problems, and proposed solutions; (2) details which provide statistics that establish the relative lost productivity by fundamental causes. Eight root causes (fundamental reasons for failures or outages) were established into which most failures and outages could be assigned. Twenty nine cause factors (causes of failure) were established which assisted in assigning the failures and outages to a root cause

THIRD GENERATION BIODIESEL PRODUCTION FROM MICROALGAE Phormidium autumnale

Directory of Open Access Journals (Sweden)

S. F. Siqueira

Full Text Available Abstract The aim of this work was to evaluate third generation biodiesel production by the microalgae Phormidium autumnale using sucrose as exogenous carbon source. The study focused on optimization of the different C/N ratios and on the analysis of biofuel quality. The results indicate that a C/N ratio of 40 improved the performance of the system, reaching single-cell oil productivities of 18.9 mg/L in steady-state conditions. This oil has a composition predominantly saturated (45.2% and monounsaturated (34.7% suitable for biodiesel synthesis (ester content of 99.8%, cetane number of 58.5%, iodine value of 67.2 gI2/100 g, unsaturation degree of 71.3% and a cold filter plugging point of 6.7 ºC.

Total energy consumption in Finland increased by one percent

International Nuclear Information System (INIS)

Timonen, L.

2000-01-01

The total energy consumption in Finland increased by less than a percent in 1999. The total energy consumption in 1999 was 1310 PJ corresponding to about 31 million toe. The electric power consumption increased moderately by 1.6%, which is less than the growth of the gross national product (3.5%). The final consumption of energy grew even less, only by 0.5%. Import of electric power increased by 19% in 1999. The import of electric power was due to the availability of low-priced electric power on the Nordic electricity markets. Nuclear power generation increased by 5% and the consumption of wood-based fuels by 3%. The increment of the nuclear power generation increased because of the increased output capacity and good operability of the power plants. Wind power production doubles, but the share of it in the total energy consumption is only about 0.01%. The peat consumption decreased by 12% and the consumption of hydroelectric power by 15%. The decrease in production of hydroelectric power was compensated by an increase import of electric power. The consumption of fossil fuels, coal, oil and natural gas remained nearly the same as in 1998. The gasoline consumption, however, decreased, but the consumption of diesel oil increased due to the increased road transport. The share of the fossil fuels was nearly half of the total energy consumption. The consumption of renewable energy sources remained nearly the same, in 23% if the share of peat is excluded, and in 30% if the share of peat is included. Wood-based fuels are the most significant type of renewable fuels. The share of them in 1999 was over 80% of the total usage of the renewable energy sources. The carbon dioxide emissions in Finland decreased in 1999 by 1.0 million tons. The total carbon dioxide emissions were 56 million tons. The decrease was mainly due to the decrease of the peat consumption. The final consumption of energy increased by 0.5%, being hence about 1019 PJ. Industry is the main consumer of energy

The neutron production rate measurement of an indigenously developed compact D-D neutron generator

Directory of Open Access Journals (Sweden)

Das Basanta Kumar

2013-01-01

Full Text Available One electrostatic accelerator based compact neutron generator was developed. The deuterium ions generated by the ion source were accelerated by one accelerating gap after the extraction from the ion source and bombarded to a target. Two different types of targets, the drive - in titanium target and the deuteriated titanium target were used. The neutron generator was operated at the ion source discharge potential at +Ve 1 kV that generates the deuterium ion current of 200 mA at the target while accelerated through a negative potential of 80 kV in the vacuum at 1.3×10-2 Pa filled with deuterium gas. A comparative study for the neutron yield with both the targets was carried out. The neutron flux measurement was done by the bubble detectors purchased from Bubble Technology Industries. The number of bubbles formed in the detector is the direct measurement of the total energy deposited in the detector. By counting the number of bubbles the total dose was estimated. With the help of the ICRP-74 neutron flux to dose equivalent rate conversion factors and the solid angle covered by the detector, the total neutron flux was calculated. In this presentation the operation of the generator, neutron detection by bubble detector and estimation of neutron flux has been discussed.

The role of safe practices in hospitals’ total factor productivity

Directory of Open Access Journals (Sweden)

Timothy R Huerta

2011-01-01

Full Text Available Timothy R Huerta1, Mark A Thompson2, Eric W Ford31Center for Health Innovation, Education, and Research, 2Rawls College of Business, Texas Tech University, Lubbock, TX, USA; 3Forsyth Medical Center Distinguished Professor of Health Care, The University of North Carolina Greensboro, Greensboro, NC, USAAbstract: The dual aims of improving safety and productivity are a major part of the health care reform movement hospital leaders must manage. Studies exploring the two phenomena conjointly and over time are critical to understanding how change in one dimension influences the other over time. A Malmquist approach is used to assess hospitals’ relative productivity levels over time. Analysis of variance (ANOVA algorithms were executed to assess whether or not the Malmquist Indices (MIs correlate with the safe practices measure. The American Hospital Association’s annual survey and the Centers for Medicare and Medicaid Services’ Case Mix Index for fiscal years 2002–2006, along with Leapfrog Group’s annual survey for 2006 were used for this study. Leapfrog Group respondents have significantly higher technological change (TC and total factor productivity (TFP than nonrespondents without sacrificing technical efficiency changes. Of the three MIs, TC (P < 0.10 and TFP (P < 0.05 had significant relationships with the National Quality Forum’s Safe Practices score. The ANOVA also indicates that the mean differences of TFP measures progressed in a monotonic fashion up the Safe Practices scale. Adherence to the National Quality Forum’s Safe Practices recommendations had a major impact on hospitals’ operating processes and productivity. Specifically, there is evidence that hospitals reporting higher Safe Practices scores had above average levels of TC and TFP gains over the period assessed. Leaders should strive for increased transparency to promote both quality improvement and increased productivity.Keywords: safety, productivity, quality, safe

Universal Generating Function Based Probabilistic Production Simulation Approach Considering Wind Speed Correlation

Directory of Open Access Journals (Sweden)

Yan Li

2017-11-01

Full Text Available Due to the volatile and correlated nature of wind speed, a high share of wind power penetration poses challenges to power system production simulation. Existing power system probabilistic production simulation approaches are in short of considering the time-varying characteristics of wind power and load, as well as the correlation between wind speeds at the same time, which brings about some problems in planning and analysis for the power system with high wind power penetration. Based on universal generating function (UGF, this paper proposes a novel probabilistic production simulation approach considering wind speed correlation. UGF is utilized to develop the chronological models of wind power that characterizes wind speed correlation simultaneously, as well as the chronological models of conventional generation sources and load. The supply and demand are matched chronologically to not only obtain generation schedules, but also reliability indices both at each simulation interval and the whole period. The proposed approach has been tested on the improved IEEE-RTS 79 test system and is compared with the Monte Carlo approach and the sequence operation theory approach. The results verified the proposed approach with the merits of computation simplicity and accuracy.

Conceptual design and system analysis of a poly-generation system for power and olefin production from natural gas

International Nuclear Information System (INIS)

Qian Yu; Liu Jingyao; Huang Zhixian; Kraslawski, Andrzej; Cui Jian; Huang Yinlun

2009-01-01

In this paper, a novel poly-generation system for olefin and power production from natural gas is proposed, which integrates hydrocarbon production and the combined cycle power generation. Economic and technological evaluation based on the internal rate of return (IRR) and exergy efficiency is performed. The energy integration results in the proposed poly-generation system for simultaneous production of chemical products (ethylene and propylene) and electricity being more thermodynamically efficient and economically viable than single purpose power generation and chemical products production plants. IRR and exergy efficiency of the proposed poly-generation system are higher than that of natural gas methanol to olefin (NGMTO) system, 18.9% and 49.9%, respectively. The biggest exergy destruction segments, their causes, and possible measures for improvement are investigated simulation and thermodynamic analysis. To analyze the effect of unreacted syngas recycle on the exergy efficiency and economic gains from the proposed poly-generation system, its thermoeconomic optimization model is built by combining economic with thermodynamic analysis. Optimization analysis shows that when 78% of the unreacted syngas is recycled back to the reactor in the methanol synthesization process, the thermoeconomic performance of the poly-generation system is at its optimum.

Status of Tc-99m and 99Mo/99mTc generator production in Bangladesh

International Nuclear Information System (INIS)

Abedin, Md. Zainul; Haque, Md. Azizul; Ali, Md. Ramjan; Hossain, Md. Anwar; Razzaque, Md. Abdur; Yasmin, Lyzu; Waheed, M. Fatima; Akhter, Rabeya; Mondal, Rafiuddin

2007-01-01

Radioisotope Production Division (RIPD) produced instant technetium-99m by solvent extraction method for several years. On R and D basis, the division produced portable sterile Tc-99m sublimation generator by irradiating titanium molybdate in the reactor. The division produced (4/batch) from imported fission Mo-99 till June 2005. Since August 2005, as per demand of the government hospitals, the division have been producing 12-14 pieces of 15 GBq chromatographic 99m Tc-generators weekly by using the new generator production plant installed last year having online Mo-99 loading system with the of producing 50 generator per batch. Development of PZC and (n,γ) 99 Mo based generator holds potential in Bangladesh. (author)

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

Science.gov (United States)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux

Science.gov (United States)

Bowman, Charles D.

1992-01-01

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux. High thermal neutron fluxes generated from the action of a high power proton accelerator on a spallation target allows the efficient burn-up of higher actinide nuclear waste by a two-step process. Additionally, rapid burn-up of fission product waste for nuclides having small thermal neutron cross sections, and the practicality of small material inventories while achieving significant throughput derive from employment of such high fluxes. Several nuclear technology problems are addressed including 1. nuclear energy production without a waste stream requiring storage on a geological timescale, 2. the burn-up of defense and commercial nuclear waste, and 3. the production of defense nuclear material. The apparatus includes an accelerator, a target for neutron production surrounded by a blanket region for transmutation, a turbine for electric power production, and a chemical processing facility. In all applications, the accelerator power may be generated internally from fission and the waste produced thereby is transmuted internally so that waste management might not be required beyond the human lifespan.

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux

Science.gov (United States)

Bowman, C.D.

1992-11-03

Apparatus for nuclear transmutation and power production using an intense accelerator-generated thermal neutron flux. High thermal neutron fluxes generated from the action of a high power proton accelerator on a spallation target allows the efficient burn-up of higher actinide nuclear waste by a two-step process. Additionally, rapid burn-up of fission product waste for nuclides having small thermal neutron cross sections, and the practicality of small material inventories while achieving significant throughput derive from employment of such high fluxes. Several nuclear technology problems are addressed including 1. nuclear energy production without a waste stream requiring storage on a geological timescale, 2. the burn-up of defense and commercial nuclear waste, and 3. the production of defense nuclear material. The apparatus includes an accelerator, a target for neutron production surrounded by a blanket region for transmutation, a turbine for electric power production, and a chemical processing facility. In all applications, the accelerator power may be generated internally from fission and the waste produced thereby is transmuted internally so that waste management might not be required beyond the human lifespan.

Wind electric power generation

International Nuclear Information System (INIS)

Groening, B.; Koch, M.; Canter, B.; Moeller, T.

1995-01-01

The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1988 and 1989. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. The statistics for December 1994 comprise 2328 wind turbines

A study of charm quark production in the NOMAD event generator

International Nuclear Information System (INIS)

Boyd, S.

1995-01-01

Although constructed primarily to aid in the search for neutrino oscillations, NOMAD, a counter experiment exposed to a ν m beam at the CERN SPS, is capable of making significant contributions to the study of charm quark production in ν m Deep Inelastic Scattering (DIS) processes. The analysis of such events, however, is dependent upon Monte Carlo simulations of the event kinematics and hence it is essential to understand the behaviour of such simulations. This talk compares data on charm production in the dimuon channel generated by the NOMAD Event Generator (NEGLIB) for an anti-neutrino beam with data collected in the CDHS experiment which ran at CERN in the period 1977-1980. Overall the two sets of data compare well, although some marked differences are observed. Several possible reasons are proposed and discussed

Small phytoplankton contribution to the standing stocks and the total primary production in the Amundsen Sea

Directory of Open Access Journals (Sweden)

S. H. Lee

2017-08-01

Full Text Available Small phytoplankton are anticipated to be more important in a recently warming and freshening ocean condition. However, little information on the contribution of small phytoplankton to overall phytoplankton production is currently available in the Amundsen Sea. To determine the contributions of small phytoplankton to total biomass and primary production, carbon and nitrogen uptake rates of total and small phytoplankton were obtained from 12 productivity stations in the Amundsen Sea. The daily carbon uptake rates of total phytoplankton averaged in this study were 0.42 g C m−2 d−1 (SD  =  ± 0.30 g C m−2 d−1 and 0.84 g C m−2 d−1 (SD  =  ± 0.18 g C m−2 d−1 for non-polynya and polynya regions, respectively, whereas the daily total nitrogen (nitrate and ammonium uptake rates were 0.12 g N m−2 d−1 (SD  =  ± 0.09 g N m−2 d−1 and 0.21 g N m−2 d−1 (SD  =  ± 0.11 g N m−2 d−1, respectively, for non-polynya and polynya regions, all of which were within the ranges reported previously. Small phytoplankton contributed 26.9 and 27.7 % to the total carbon and nitrogen uptake rates of phytoplankton in this study, respectively, which were relatively higher than the chlorophyll a contribution (19.4 % of small phytoplankton. For a comparison of different regions, the contributions for chlorophyll a concentration and primary production of small phytoplankton averaged from all the non-polynya stations were 42.4 and 50.8 %, which were significantly higher than those (7.9 and 14.9 %, respectively in the polynya region. A strong negative correlation (r2 = 0. 790, p<0. 05 was found between the contributions of small phytoplankton and the total daily primary production of phytoplankton in this study. This finding implies that daily primary production decreases as small phytoplankton contribution increases, which is

Exploration and production environment. Preserving the future our responsibility; Exploration et production environnement. Preserver l'avenir: notre responsabilite

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This document presents the Total Group commitments to manage natural resources in a rational way, to preserve biodiversity for future generations and protect the environment. It contains the health, safety, environment and quality charter of Total, the 12 exploration and production health, safety and environment rules and the exploration and production environmental policy. (A.L.B.)

Corrosion Product Measurements to ensure integrity of the Steam Generators in Beznau NPP

International Nuclear Information System (INIS)

Mailand, Irene; Franz, Patrick; Venz, Hartmut

2012-09-01

The Nuclear Power Plant Beznau comprises two identical 380 MWe PWR units with two loops each, commissioned in 1969 and 1971. Westinghouse was responsible for the primary part of the plant and BBC/ABB for the secondary circuit. The original materials used in the secondary systems were made of several copper-based alloys, such as for the Condensers, the Low Pressure Pre-heaters and the Moisture Separator Re-heater. The original Steam Generator Tubes were made of Inconel 600 MA. Regarding its age, the NPP Beznau has to be qualified as an old plant. However, in fact particularly in the last 20 years the plant has undergone an extensive modernisation programme in which about 1.5 billion Swiss Francs have been invested. Important measures were the replacements of the Steam Generators with tubes comprising Inconel 690 TT which was realized at unit 1 in 1993 and at unit 2 in 1999. Copper was completely banished from the secondary system and replaced by stainless and chromium steel. The Condensers were fitted with titanium tubes. The secondary water chemistry had to be changed by these replacements and moved step by step from Low-AVT with a pH of about 9.3 to High-AVT with a pH of 9.8 to 9.9, currently. To ensure the integrity of the new Steam Generators as well as of the whole Secondary System a corrosion product programme was introduced at the end of the Nineties. Several investigations which are performed periodically are represented by analyses of corrosion products, measurements of sludge mass and composition in the Steam Generators, Hide-Out-Return- and mass balance measurements of corrosion products in the whole circuit. Objectives of these investigations are assessments of the efficiency of the water chemistry and trend considerations regarding to the transport of corrosion products and pollutants into the Steam Generator, as well as of the potential danger of deposits and stored or absorbed pollutants. The main target of all measures is to avoid any chemical

Gaseous products and smoke generation on combustion of the insulation materials of nuclear cables

International Nuclear Information System (INIS)

Noguchi, Isamu; Takami, Hiroshi; Ueyama, Michio; Fujimura, Shun-ichi.

1976-01-01

Serious requirements have been introduced to the cables used for nuclear power plants on their flame retardation in the IEEE Standard 383-1974. The movements that the users prescribe the quantity of corrosive gas generated from cables are also observed. This report describes on the measured results of the gaseous products generated by burning polyethylene, polyvinyl-chloride (PVC) and their flame-resistant products, and a part of the covering materials of the cables for nuclear power plants (flame-resistant, crosslinking polyethylene, flame-resistant, low hydrochloric acid PVC, flame-resistant jute) in the infra-red rapid heating combustion test facility designed by the Furukawa Electric Co. Ltd. In addition, the report introduces the test method for the smoke generation evaluation of polymers and a part of the measured results. The gaseous products of combustion were collected and determined quantitatively by gas chromatographic method. Since smoke generation is affected greatly by the kinds, shape, atmosphere, temperature, ignition procedure and others of burnt matters, the establishment of the evaluation test method is difficult, and a number of methods have been proposed. As the measured results showed, it is clear that smoke generation increases with the increase of flame resistant reagent addition. The smoke generation of PVC was of course great in quantity because it contains considerable amount of chlorine for its molecular structure. Flame-resistant polyethylene generates smoke much more than polyethylene without flame-resisting treatment because of its flame resistivity, but less than that of PVC. (Wakatsuki, Y.)

The interaction between EU biofuel policy and first- and second-generation biodiesel production

NARCIS (Netherlands)

Boutesteijn, C.; Drabik, D.; Venus, T.J.

2017-01-01

We build a tractable partial equilibrium model to study the interactions between the EU biofuel policies (mandate and double-counting of second-generation biofuels) and first- and second-generation biodiesel production. We find that increasing the biodiesel mandate results in a higher share of

Total factor productivity (TFP) growth agriculture in pakistan: trends in different time horizons

International Nuclear Information System (INIS)

Ali, A.; Mushtaq, K.; Ashfaq, M.

2008-01-01

The present study estimated total factor productivity (TFP) growth of agriculture sector of Pakistan for the period 1971-2006 by employing Tornqvist-Theil (T-T) index number methodology. Most of the conventional inputs were used in constructing the input index. The output index includes major crops, minor crops, important fruits and vegetables and four categories of livestock products. The study estimated TFP growth rates for different decades. The results showed that TFP growth rate was lowest during the decade of 70s (0.96 percent) and highest during the last six years of the study period (2.86 percent). The decade of 80s and 90s registered TFP growth rate of 2.24 percent and 2.46 percent, respectively. The results also explained that TFP growth contributed about 33 percent to total agricultural output growth during the decade of 70s and this contribution increased up to 83 percent during the last six years of the study period. The contribution of TFP growth to total agricultural output growth was 53 and 81 percent during the decades of 80s and 90s, respectively. The study observed that macro level government policies, institutional factors and weather conditions are the major key factors that influenced TFP growth. (author)

PCS a code system for generating production cross section libraries

International Nuclear Information System (INIS)

Cox, L.J.

1997-01-01

This document outlines the use of the PCS Code System. It summarizes the execution process for generating FORMAT2000 production cross section files from FORMAT2000 reaction cross section files. It also describes the process of assembling the ASCII versions of the high energy production files made from ENDL and Mark Chadwick's calculations. Descriptions of the function of each code along with its input and output and use are given. This document is under construction. Please submit entries, suggestions, questions, and corrections to (ljc at sign llnl.gov) 3 tabs

S-Nitroglutathione, a product of the reaction between peroxynitrite and glutathione that generates nitric oxide.

Science.gov (United States)

Balazy, M; Kaminski, P M; Mao, K; Tan, J; Wolin, M S

1998-11-27

Peroxynitrite (ONOO-) has been shown in studies on vascular relaxation and guanylate cyclase activation to react with glutathione (GSH), generating an intermediate product that promotes a time-dependent production of nitric oxide (NO). In this study, reactions of ONOO- with GSH produced a new substance, which was characterized by liquid chromatography, ultraviolet spectroscopy, and electrospray tandem mass spectrometry. The mass spectrometric data provided evidence that the product of this reaction was S-nitroglutathione (GSNO2) and that S-nitrosoglutathione (GSNO) was not a detectable product of this reaction. Further evidence was obtained by comparison of the spectral and chromatographic properties with synthetic standards prepared by reaction of GSH with nitrosonium or nitronium borofluorates. Both the synthetic and ONOO-/GSH-derived GSNO2 generated a protonated ion, GSNO2H+, at m/z 353, which was unusually resistant to decomposition under collision activation, and no fragmentation was observed at collision energy of 25 eV. In contrast, an ion at m/z 337 (GSNOH+), generated from the synthetic GSNO, readily fragmented with the abundant loss of NO at 9 eV. Reactions of ONOO- with GSH resulted in the generation of NO, which was detected by the head space/NO-chemiluminescence analyzer method. The generation of NO was inhibited by the presence of glucose and/or CO2 in the buffers employed. Synthetic GSNO2 spontaneously generated NO in a manner that was not significantly altered by glucose or CO2. Thus, ONOO- reacts with GSH to form GSNO2, and GSNO2 decomposes in a manner that generates NO.

Total synthesis of the putative structure of the novel triquinane natural product isocapnellenone

OpenAIRE

Mehta, Goverdhan; Murthy, Sai Krishna A; Umarye, Jayant D

2002-01-01

A total synthesis of the ‘putative structure’ 7, attributed to the novel triquinane sesquiterpene isolated recently from two Buddelia species has been accomplished. The spectral data for 7 is a complete mismatch with those reported for the natural product and warrants a revision of the assigned structure.

Automated system for generation of soil moisture products for agricultural drought assessment

Science.gov (United States)

Raja Shekhar, S. S.; Chandrasekar, K.; Sesha Sai, M. V. R.; Diwakar, P. G.; Dadhwal, V. K.

2014-11-01

Drought is a frequently occurring disaster affecting lives of millions of people across the world every year. Several parameters, indices and models are being used globally to forecast / early warning of drought and monitoring drought for its prevalence, persistence and severity. Since drought is a complex phenomenon, large number of parameter/index need to be evaluated to sufficiently address the problem. It is a challenge to generate input parameters from different sources like space based data, ground data and collateral data in short intervals of time, where there may be limitation in terms of processing power, availability of domain expertise, specialized models & tools. In this study, effort has been made to automate the derivation of one of the important parameter in the drought studies viz Soil Moisture. Soil water balance bucket model is in vogue to arrive at soil moisture products, which is widely popular for its sensitivity to soil conditions and rainfall parameters. This model has been encoded into "Fish-Bone" architecture using COM technologies and Open Source libraries for best possible automation to fulfill the needs for a standard procedure of preparing input parameters and processing routines. The main aim of the system is to provide operational environment for generation of soil moisture products by facilitating users to concentrate on further enhancements and implementation of these parameters in related areas of research, without re-discovering the established models. Emphasis of the architecture is mainly based on available open source libraries for GIS and Raster IO operations for different file formats to ensure that the products can be widely distributed without the burden of any commercial dependencies. Further the system is automated to the extent of user free operations if required with inbuilt chain processing for every day generation of products at specified intervals. Operational software has inbuilt capabilities to automatically

Towards a better understanding of flood generation and surface water inundation mechanisms using NASA remote sensing data products

Science.gov (United States)

Lucey, J.; Reager, J. T., II; Lopez, S. R.

2017-12-01

Floods annually cause several weather-related fatalities and financial losses. According to NOAA and FEMA, there were 43 deaths and 18 billion dollars paid out in flood insurance policies during 2005. The goal of this work is to improve flood prediction and flood risk assessment by creating a general model of predictability of extreme runoff generation using various NASA products. Using satellite-based flood inundation observations, we can relate surface water formation processes to changes in other hydrological variables, such as precipitation, storage and soil moisture, and understand how runoff generation response to these forcings is modulated by local topography and land cover. Since it is known that a flood event would cause an abnormal increase in surface water, we examine these underlying physical relationships in comparison with the Dartmouth Flood Observatory archive of historic flood events globally. Using ground water storage observations (GRACE), precipitation (TRMM or GPCP), land use (MODIS), elevation (SRTM) and surface inundation levels (SWAMPS), an assessment of geological and climate conditions can be performed for any location around the world. This project utilizes multiple linear regression analysis evaluating the relationship between surface water inundation, total water storage anomalies and precipitation values, grouped by average slope or land use, to determine their statistical relationships and influences on inundation data. This research demonstrates the potential benefits of using global data products for early flood prediction and will improve our understanding of runoff generation processes.

Aquatic weeds as the next generation feedstock for sustainable bioenergy production.

Science.gov (United States)

Kaur, Manpreet; Kumar, Manoj; Sachdeva, Sarita; Puri, S K

2018-03-01

Increasing oil prices and depletion of existing fossil fuel reserves, combined with the continuous rise in greenhouse gas emissions, have fostered the need to explore and develop new renewable bioenergy feedstocks that do not require arable land and freshwater resources. In this regard, prolific biomass growth of invasive aquatic weeds in wastewater has gained much attention in recent years in utilizing them as a potential feedstock for bioenergy production. Aquatic weeds have an exceptionally higher reproduction rates and are rich in cellulose and hemicellulose with a very low lignin content that makes them an efficient next generation biofuel crop. Considering their potential as an effective phytoremediators, this review presents a model of integrated aquatic biomass production, phytoremediation and bioenergy generation to reduce the land, fresh water and fertilizer usage for sustainable and economical bioenergy. Copyright © 2017. Published by Elsevier Ltd.

Exploration and production environment. Preserving the future our responsibility; Exploration et production environnement. Preserver l'avenir: notre responsabilite

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This document presents the Total Group commitments to manage natural resources in a rational way, to preserve biodiversity for future generations and protect the environment. It contains the health, safety, environment and quality charter of Total, the 12 exploration and production health, safety and environment rules and the exploration and production environmental policy. (A.L.B.)

Experience with modular steam generator production and application of new testing methods

International Nuclear Information System (INIS)

Olesovsky

Experience is reviewed gained at the Trebic IBZKG plant with the production of modular steam generators. The plant started producing steam generators for the Jaslovske Bohunice nuclear power plant in 1965. In addition to the steam generator for the A-1, the plant also produced a loop for the Melekess power plant and a steam generator for the BOR-60 reactor. Operating experience gained so far allowed improving the quality of the BOR steam generator, especially in the tube-tube plate joint. A double tube plate was used and the welded joint shape was changed. As a result of high requirements on the quality of welded joints, the steam generator has successfully been in operation for more then 10,000 hours. The existing experience was utilized in designing a new steam generator named Nadya. Many design and technological requirements were presented concerning the Nadya generator and many new checking operations have been included in technology. (Kr)

Vector Production in an Academic Environment: A Tool to Assess Production Costs

Science.gov (United States)

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

Supply chain optimization of sugarcane first generation and eucalyptus second generation ethanol production in Brazil

International Nuclear Information System (INIS)

Jonker, J.G.G.; Junginger, H.M.; Verstegen, J.A.; Lin, T.; Rodríguez, L.F.; Ting, K.C.; Faaij, A.P.C.; Hilst, F. van der

2016-01-01

Highlights: • Optimal location & scale of ethanol plants for expansion in Goiás until 2030. • Ethanol costs from sugarcane vary between 710 and 752 US$/m"3 in 2030. • For eucalyptus-based ethanol production costs vary between 543 and 560 US$/m"3 in 2030. • System-wide optimization has a marginal impact on overall production costs. • The overall GHG emission intensity is mainly impacted by former land use. - Abstract: The expansion of the ethanol industry in Brazil faces two important challenges: to reduce total ethanol production costs and to limit the greenhouse gas (GHG) emission intensity of the ethanol produced. The objective of this study is to economically optimize the scale and location of ethanol production plants given the expected expansion of biomass supply regions. A linear optimization model is utilized to determine the optimal location and scale of sugarcane and eucalyptus industrial processing plants given the projected spatial distribution of the expansion of biomass production in the state of Goiás between 2012 and 2030. Three expansion approaches evaluated the impact on ethanol production costs of expanding an existing industry in one time step (one-step), or multiple time steps (multi-step), or constructing a newly emerging ethanol industry in Goiás (greenfield). In addition, the GHG emission intensity of the optimized ethanol supply chains are calculated. Under the three expansion approaches, the total ethanol production costs of sugarcane ethanol decrease from 894 US$/m"3 ethanol in 2015 to 752, 715, and 710 US$/m"3 ethanol in 2030 for the multi-step, one step and greenfield expansion respectively. For eucalyptus, ethanol production costs decrease from 635 US$/m"3 in 2015 to 560 and 543 US$/m"3 in 2030 for the multi-step and one-step approach. A general trend is the use of large scale industrial processing plants, especially towards 2030 due to increased biomass supply. We conclude that a system-wide optimization as a marginal

Evaluation of the total gamma-ray production cross-sections for nonelastic interaction of fast neutrons with iron nuclei

International Nuclear Information System (INIS)

Savin, M.V.; Nefedov, Yu.Ya; Livke, A.V.; Zvenigorodskij, A.G.

2001-01-01

Experimental data on the total gamma-ray production cross-sections for inelastic interaction of fast neutrons with iron nuclei were analysed. The total gamma-ray production cross-sections, grouped according to E γ , were evaluated in the neutron energy range 0.5-19 MeV. The statistical spline approximation method was used to evaluate the experimental data. Evaluated data stored in the ENDF, JENDL, BROND, and other libraries on gamma-ray production spectra and cross-sections for inelastic interaction of fast neutrons with iron nuclei, were analysed. (author)

Summary Report of the Seventh Annual NASA/Contractors Conference on Quality and Productivity: "Total Quality Leadership"

Science.gov (United States)

1991-01-01

More than 750 NASA, government, contractor, and academic representatives attended the Seventh Annual NASA/Contractors Conference on Quality and Productivity on October 12-13, 1990, in Grenelefe, Florida. The panel presentations and keynote speeches revolving around the theme of 'Total Quality Leadership" provided a solid base of understanding of the importance, benefits, and principles of total quality management. The implementation of these strategies is critical if we are to effectively pursue our mission of continuous quality improvement and reliability in our products, processes, and services. The annual NASA/contractors conferences serve as catalysts for achieving success in this mission.

Production inefficiency of electricity markets with hydro generation

International Nuclear Information System (INIS)

Philpott, Andy; Guan, Ziming; Khazaei, Javad; Zakeri, Golbon

2010-01-01

Electricity market designs that decentralize decision making for participants can lead to inefficiencies in the presence of nonconvexity or missing markets. This has been shown in the case of unit-commitment problems that can make a decentralized market equilibrium less efficient than a centrally planned solution. Less attention has been focused on systems with large amounts of hydro-electric generation. We describe the results of an empirical study of the New Zealand wholesale electricity market that attempts to quantify production efficiency losses by comparing market outcomes with a counterfactual central plan. (author)

Symptoms of mothers and infants related to total volatile organic compounds in household products

OpenAIRE

Farrow, A; Taylor, H; Northstone, K; Golding, J

2003-01-01

The authors sought to determine whether reported symptoms of mothers and infants were associated significantly with the use of household products that raised indoor levels of total volatile organic compounds (TVOCs). Data collected from 170 homes within the Avon Longitudinal Study of Parents and Children (ALSPAC: a large birth cohort of more than 10,000) had determined which household products were associated with the highest levels of TVOCs. The latter data were collected over a period that ...

Emergency product generation for disaster management using RISAT and DMSAR quick look SAR processors

Science.gov (United States)

Desai, Nilesh; Sharma, Ritesh; Kumar, Saravana; Misra, Tapan; Gujraty, Virendra; Rana, SurinderSingh

2006-12-01

generate full-swath (6 to 75 Kms) DMSAR images in 1m / 3m / 5m / 10m / 30m resolution SAR operating modes. For RISAT mission, this generic Quick Look SAR Processor will be mainly used for browse product generation at NRSA-Shadnagar (SAN) ground receive station. RISAT QLP/NRTP is also proposed to provide an alternative emergency SAR product generation chain. For this, the S/C aux data appended in Onboard SAR Frame Format (x, y, z, x', y', z', roll, pitch, yaw) and predicted orbit from previous days Orbit Determination data will be used. The QLP / NRTP will produce ground range images in real / near real time. For emergency data product generation, additional Off-line tasks like geo-tagging, masking, QC etc needs to be performed on the processed image. The QLP / NRTP would generate geo-tagged images from the annotation data available from the SAR P/L data itself. Since the orbit & attitude information are taken as it is, the location accuracy will be poorer compared to the product generated using ADIF, where smoothened attitude and orbit are made available. Additional tasks like masking, output formatting and Quality checking of the data product will be carried out at Balanagar, NRSA after the image annotated data from QLP / NRTP is sent to Balanagar. The necessary interfaces to the QLP/NRTP for Emergency product generation are also being worked out. As is widely acknowledged, QLP/NRTP for RISAT and DMSAR is an ambitious effort and the technology of future. It is expected that by the middle of next decade, the next generation SAR missions worldwide will have onboard SAR Processors of varying capabilities and generate SAR Data products and Information products onboard instead of SAR raw data. Thus, it is also envisaged that these activities related to QLP/NRTP implementation for RISAT ground segment and DMSAR will be a significant step which will directly feed into the development of onboard real time processing systems for ISRO's future space borne SAR missions. This paper

Neutron generator production mission in a national laboratory.

Energy Technology Data Exchange (ETDEWEB)

Pope, Larry E.

2007-08-01

In the late 1980's the Department of Energy (DOE) faced a future budget shortfall. By the spring of 1991, the DOE had decided to manage this problem by closing three production plants and moving production capabilities to other existing DOE sites. As part of these closings, the mission assignment for fabrication of War Reserve (WR) neutron generators (NGs) was transferred from the Pinellas Plant (PP) in Florida to Sandia National Laboratories, New Mexico (SNL/NM). The DOE directive called for the last WR NG to be fabricated at the PP before the end of September 1994 and the first WR NG to be in bonded stores at SNL/NM by October 1999. Sandia National Laboratories successfully managed three significant changes to project scope and schedule and completed their portion of the Reconfiguration Project on time and within budget. The PP was closed in October 1995. War Reserve NGs produced at SNL/NM were in bonded stores by October 1999. The costs of the move were recovered in just less than five years of NG production at SNL/NM, and the annual savings today (in 1995 dollars) is $47 million.

The development of environmental productivity

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha T.

the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

Evaluating the Total Factor Productivity Growth in Manufacturing Industries of Iran (Data Envelopment Analysis Approach

Directory of Open Access Journals (Sweden)

Vahideh Ahmadi

2014-01-01

Full Text Available This paper examines the total factor productivity changes for 23 main manufacturing industries (2-digit ISIC group and country's provinces using data envelopment analysis during 2005 to 2007. The results show 2.3% increase in the productivity of the whole sector (average over the studied period, while the productivity of the country's provinces decreases by 7.3%, in the same period. We find Food and Beverage products and Khuzestan province having the highest productivity growth. Non-optimal allocation of resources and using of old equipments are the most important drawbacks of productivity growth for 23 main ISIC groups and provinces. Finally estimation of the regression models by panel data method reveals the privatization and increasing of labor’s available capital having a significant effect on productivity growth.

Analyzing the requirements for mass production of small wind turbine generators

Science.gov (United States)

Anuskiewicz, T.; Asmussen, J.; Frankenfield, O.

Mass producibility of small wind turbine generators to give manufacturers design and cost data for profitable production operations is discussed. A 15 kW wind turbine generator for production in annual volumes from 1,000 to 50,000 units is discussed. Methodology to cost the systems effectively is explained. The process estimate sequence followed is outlined with emphasis on the process estimate sheets compiled for each component and subsystem. These data enabled analysts to develop cost breakdown profiles crucial in manufacturing decision-making. The appraisal also led to various design recommendations including replacement of aluminum towers with cost effective carbon steel towers. Extensive cost information is supplied in tables covering subassemblies, capital requirements, and levelized energy costs. The physical layout of the plant is depicted to guide manufacturers in taking advantage of the growing business opportunity now offered in conjunction with the national need for energy development.

A Theory of Information Genetics: How Four Subforces Generate Information and the Implications for Total Quality Knowledge Management.

Science.gov (United States)

Tsai, Bor-sheng

2002-01-01

Proposes a model called information genetics to elaborate on the origin of information generating. Explains conceptual and data models; and describes a software program that was developed for citation data mining, infomapping, and information repackaging for total quality knowledge management in Web representation. (Contains 112 references.)…

Optimalization of production inside logistics chain for 21st century

Directory of Open Access Journals (Sweden)

Drago Pupavac

2006-12-01

Full Text Available In today’s world numerous logistics chains exist, competing for similar jobs in different markets throughout the world. By connecting the supply and demand, i.e. production and consumption, logistics chains create national, regional and global logistics network which task is to maximise total generated value. Generated valueis defined as the difference between the price of finished product or service and the input necessary to create such products. The chain profitability is shown by the difference between the income obtained through sale of products or services and total expenditure in that chain. Accordingly, this scientific debate researches the possibilityof production optimisation within logistic chain by application of dynamic programming method with emphasis on information technologies.

Variability in the reported energy, total fat and saturated fat contents in fast-food products across ten countries.

Science.gov (United States)

Ziauddeen, Nida; Fitt, Emily; Edney, Louise; Dunford, Elizabeth; Neal, Bruce; Jebb, Susan A

2015-11-01

Fast foods are often energy dense and offered in large serving sizes. Observational data have linked the consumption of fast foods to an increased risk of obesity and related diseases. We surveyed the reported energy, total fat and saturated fat contents, and serving sizes, of fast-food items from five major chains across ten countries, comparing product categories as well as specific food items available in most countries. MRC Human Nutrition Research, Cambridge, UK. Data for 2961 food and drink products were collected, with most from Canada (n 550) and fewest from the United Arab Emirates (n 106). There was considerable variability in energy and fat contents of fast foods across countries, reflecting both the portfolio of products and serving size variability. Differences in total energy between countries were particularly noted for chicken dishes (649-1197 kJ/100 g) and sandwiches (552-1050 kJ/100g). When comparing the same product between countries variations were consistently observed in total energy and fat contents (g/100 g); for example, extreme variation in McDonald's Chicken McNuggets with 12 g total fat/100 g in Germany compared with 21·1 g/100 g in New Zealand. These cross-country variations highlight the possibility for further product reformulation in many countries to reduce nutrients of concern and improve the nutritional profiles of fast-food products around the world. Standardisation of serving sizes towards the lower end of the range would also help to reduce the risk of overconsumption.

Variability in the reported energy, total fat and saturated fat content in fast food products across ten countries

Science.gov (United States)

Ziauddeen, Nida; Fitt, Emily; Edney, Louise; Dunford, Elizabeth; Neal, Bruce; Jebb, Susan A.

2016-01-01

Objective Fast foods are often energy dense and offered in large serving sizes. Observational data has linked the consumption of fast food to an increased risk of obesity and related diseases. Design We surveyed the reported energy, total fat and saturated fat contents, and serving sizes, of fast food items from five major chains across 10 countries, comparing product categories as well as specific food items available in most countries. Setting MRC Human Nutrition Research (HNR), Cambridge Subjects Data for 2961 food and drink products were collected, with most from Canada (n=550) and fewest from United Arab Emirates (n=106). Results There was considerable variability in energy and fat content of fast food across countries, reflecting both the portfolio of products, and serving size variability. Differences in total energy between countries were particularly noted for chicken dishes (649-1197kJ/100g) and sandwiches (552-1050kJ/100g). When comparing the same product between countries variations were consistently observed in total energy and fat content (g/100g) with extreme variation in McDonald’s Chicken McNuggets with 12g total fat (g/100g) in Germany compared to 21.1g in New Zealand. Conclusions These cross-country variations highlight the possibility for further product reformulation in many countries to reduce nutrients of concern and improve the nutritional profiles of fast food products around the world. Standardisation of serving sizes towards the lower end of the range would also help to reduce the risk of overconsumption. PMID:25702788

Statistical model of hadrons multiple production in space of total angular momentum and isotopic spin

International Nuclear Information System (INIS)

Gridneva, S.A.; Rus'kin, V.I.

1980-01-01

Basic features of the statistical model of multiple hadron production based on microcanonical distribution and taking into account the laws of conservation of total angular momentum, isotopic spin, p-, G-, C-eveness and Bose-Einstein statistics requirements are given. The model predictions are compared with experimental data on anti NN annihilation at rest and e + e - annihilation in hadrons at annihilation total energy from 2 to 3 GeV [ru

Bakery products as a source of total dietary fiber in young adults.

Science.gov (United States)

Markiewicz-Żukowska, Renata; Moskwa, Justyna; Gromkowska-Kępka, Krystyna; Laskowska, Emilia; Laskowska, Jolanta; Tomczuk, Justyna; Borawska, Maria Halina

2016-01-01

Bakery products are a source of bioactive compounds, such as dietary fibre (DF), whose proper supply plays an important role in prevention of civilisation diseases. The aim of the present study was to determine total dietary fibre (TDF) content in bakery products and their contribution to TDF supply. The determination of TDF content was performed using enzymatic-gravimetric method in 72 samples of six types of bakery products (wholemeal rye bread, wheat-rye bread, wheat-rye bread with grains, toast bread, crispbread, rolls) included in the young adults diet. Simultaneously, frequency of bakery products consumption and their contribution to TDF supply were assessed based on dietary interview questionnaires carried out among 224 students from Poland. Index of nutritional quality (INQ) of examined bakery products was calculated. Our data indicate that average TDF content depended on the type of bakery products and ranged from 2.19 g/100 g in rolls to 11.80 g/100 g in wholemeal rye bread. All of the tested types of bakery products, except rolls, were a good source of fibre (INQ≥1), but the richest were wholemeal rye and wheat-rye with grains breads. Analysis of questionnaires data showed that bakery products were regularly consumed by 80% of young adults; however, most of whom preferred rolls. Consumption of bakery products covered current recommendations for dietary fibre in 27%. Daily intake of bakery products and TDF was not correlated with student's BMI, however, women frequently consuming bread had a lower BMI than those who rarely ate it. Wholemeal rye and wheat-rye with grains breads are the rich source of TDF and they should be consumed by young adults in order to achieve the recommended TDF values.

Reference costs for power generation; Couts de reference de la production electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-12-01

The first part of the 2003 study of reference costs for power generation has been completed. It was carried out by the General Directorate for Energy and Raw Materials (DGEMP) of the French Ministry of the Economy, Finance and Industry, with the collaboration of power-plant operators, construction firms and many other experts. A Review Committee of experts including economists (Forecasting Department, French Planning Office), qualified public figures, representatives of power-plant construction firms and operators, and non-governmental organization (NGO) experts, was consulted in the final phase. The study examines the costs of power generated by different methods (i.e. nuclear and fossil-fuel [gas-, coal-, and oil-fired] power plants) in the context of an industrial operation beginning in the year 2015. - The second part of the study relating to decentralized production methods (wind, photovoltaic, combined heat and power) is still in progress and will be presented at the beginning of next year. - 1. Study approach: The study is undertaken mainly from an investor's perspective and uses an 8% discount rate to evaluate the expenses and receipts from different years. In addition, the investment costs are considered explicitly in terms of interest during construction. - 2. Plant operating on a full-time basis (year-round): The following graph illustrates the main conclusions of the study for an effective operating period of 8000 hours. It can be seen that nuclear is more competitive than the other production methods for a year-round operation with an 8% discount rate applied to expenses. This competitiveness is even better if the costs related to greenhouse-gas (CO{sub 2}) emission are taken into account in estimating the MWh cost price. Integrating the costs resulting from CO{sub 2} emissions by non-nuclear fuels (gas, coal), which will be compulsory as of 2004 with the transposition of European directives, increases the total cost per MWh of these power generation

Reference costs for power generation; Couts de reference de la production electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-12-01

The first part of the 2003 study of reference costs for power generation has been completed. It was carried out by the General Directorate for Energy and Raw Materials (DGEMP) of the French Ministry of the Economy, Finance and Industry, with the collaboration of power-plant operators, construction firms and many other experts. A Review Committee of experts including economists (Forecasting Department, French Planning Office), qualified public figures, representatives of power-plant construction firms and operators, and non-governmental organization (NGO) experts, was consulted in the final phase. The study examines the costs of power generated by different methods (i.e. nuclear and fossil-fuel [gas-, coal-, and oil-fired] power plants) in the context of an industrial operation beginning in the year 2015. - The second part of the study relating to decentralized production methods (wind, photovoltaic, combined heat and power) is still in progress and will be presented at the beginning of next year. - 1. Study approach: The study is undertaken mainly from an investor's perspective and uses an 8% discount rate to evaluate the expenses and receipts from different years. In addition, the investment costs are considered explicitly in terms of interest during construction. - 2. Plant operating on a full-time basis (year-round): The following graph illustrates the main conclusions of the study for an effective operating period of 8000 hours. It can be seen that nuclear is more competitive than the other production methods for a year-round operation with an 8% discount rate applied to expenses. This competitiveness is even better if the costs related to greenhouse-gas (CO{sub 2}) emission are taken into account in estimating the MWh cost price. Integrating the costs resulting from CO{sub 2} emissions by non-nuclear fuels (gas, coal), which will be compulsory as of 2004 with the transposition of European directives, increases the total cost per MWh of these power

Efficiency analysis of hydroelectric generating plants: A case study for Portugal

International Nuclear Information System (INIS)

Barros, Carlos Pestana

2008-01-01

This paper estimates changes in total productivity, breaking this down into technically efficient change and technological change, by means of data envelopment analysis (DEA) applied to the hydroelectric energy generating plants of EDP - the Portugal Electricity Company. The aim of this procedure is to seek out those best practices that will lead to improved performance in the energy market. We rank the plants according to their change in total productivity for the period 2001-2004, concluding that some plants experienced productivity growth while others experienced a decrease in productivity. The implications arising from the study are that EDP should adopt an internal benchmark management procedure in order to evaluate the relative position of each hydroelectric generating plant and to adopt managerial strategies designed to catch up with the frontier of 'best practices'. As the frontier is shifting along the time, constant efforts are needed in this respect along the time. (author)

Generating functional analysis of minority games with inner product strategy definitions

Science.gov (United States)

Coolen, A. C. C.; Shayeghi, N.

2008-08-01

We use generating functional methods to solve the so-called inner product versions of the minority game (MG), with fake and/or real market histories, by generalizing the theory developed recently for look-up table MGs with real histories. The phase diagrams of the look-up table and inner product MG versions are generally found to be identical, with the exception of inner product MGs where histories are sampled linearly, which are found to be structurally critical. However, we encounter interesting differences both in the theory (where the role of the history frequency distribution in look-up table MGs is taken over by the eigenvalue spectrum of a history covariance matrix in inner product MGs) and in the static and dynamic phenomenology of the models. Our theoretical predictions are supported by numerical simulations.

Generating functional analysis of minority games with inner product strategy definitions

Energy Technology Data Exchange (ETDEWEB)

Coolen, A C C; Shayeghi, N [Department of Mathematics, King' s College London, The Strand, London WC2R 2LS (United Kingdom)], E-mail: ton.coolen@kcl.ac.uk, E-mail: nima@mth.kcl.ac.uk

2008-08-15

We use generating functional methods to solve the so-called inner product versions of the minority game (MG), with fake and/or real market histories, by generalizing the theory developed recently for look-up table MGs with real histories. The phase diagrams of the look-up table and inner product MG versions are generally found to be identical, with the exception of inner product MGs where histories are sampled linearly, which are found to be structurally critical. However, we encounter interesting differences both in the theory (where the role of the history frequency distribution in look-up table MGs is taken over by the eigenvalue spectrum of a history covariance matrix in inner product MGs) and in the static and dynamic phenomenology of the models. Our theoretical predictions are supported by numerical simulations.

Generating functional analysis of minority games with inner product strategy definitions

International Nuclear Information System (INIS)

Coolen, A C C; Shayeghi, N

2008-01-01

We use generating functional methods to solve the so-called inner product versions of the minority game (MG), with fake and/or real market histories, by generalizing the theory developed recently for look-up table MGs with real histories. The phase diagrams of the look-up table and inner product MG versions are generally found to be identical, with the exception of inner product MGs where histories are sampled linearly, which are found to be structurally critical. However, we encounter interesting differences both in the theory (where the role of the history frequency distribution in look-up table MGs is taken over by the eigenvalue spectrum of a history covariance matrix in inner product MGs) and in the static and dynamic phenomenology of the models. Our theoretical predictions are supported by numerical simulations

Estimating generation costs for wind power production in France

International Nuclear Information System (INIS)

Benazet, J.F.; Probert, E.J.

1997-01-01

Wind power is being exploited in several European countries as one of a possible number of sources of renewable energy. However, in France there is a heavy reliance on nuclear and hydro-electric power and the potential of wind power as part of the energy mix has been virtually ignored. One of the reasons advanced for the under utilisation of this technology is that it is financially unattractive. In this paper the contribution which wind power could potentially make to overall power production levels in France is examined. A cost estimate model is developed which derives electricity generation costs and determines realistic levels of production for the future. The model automatically determines the associated number of wind turbines required and the geographical areas in which they should be located. (author)

A neutron detector for measurement of total neutron production cross sections

International Nuclear Information System (INIS)

Sekharan, K.K.; Laumer, H.; Kern, B.D.; Gabbard, F.

1976-01-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight 10 BF 3 counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from 7 Li(p, n) 7 Be. By adjusting the radial positions of the BF 3 counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from 51 V(p, n) 51 Cr and 57 Fe(p, n) 57 Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given. (Auth.)

Mass flow discharge and total temperature characterisation of a pyrotechnic gas generator formulation for airbag systems

Energy Technology Data Exchange (ETDEWEB)

Neutz, Jochen; Koenig, Andreas [Fraunhofer Institut fuer Chemische Technologie ICT, Pfinztal (Germany); Knauss, Helmut; Jordan, Sebastian; Roediger, Tim; Smorodsky, Boris [Universitaet Stuttgart (Germany). Institut fuer Aerodynamik und Gasdynamik; Bluemcke, Erich Walter [AUDI AG, Department I/EK-523, Ingolstadt (Germany)

2009-06-15

The mass flow characteristics of gas generators for airbag applications have to comply with a number of requirements for an optimal deployment of the airbag itself. Up to now, the mass flow was determined from pressure time histories of so-called can tests. This procedure suffers from the missing knowledge on the temperature of the generated gas entering the can. A new test setup described in this paper could overcome this problem by providing highly time resolved information on the gas's total temperature and the mass flow of the generator. The test setup consisted of a combustion chamber with a specially designed Laval nozzle in combination with a temperature sensor of high time resolution. The results showed a high time resolved temperature signal, which was disturbed by the formation of a slag layer on the sensor. Plausibility considerations with experimentally and thermodynamically determined combustion temperatures led to satisfying results for the overall temperature as characteristic parameter of airbag inflating gases flows from pyrotechnics. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Chemical cleaning of nuclear (PWR) steam generators

International Nuclear Information System (INIS)

Welty, C.S. Jr.; Mundis, J.A.

1982-01-01

This paper reports on a significant research program sponsored by a group of utilities (the Steam Generator Owners Group), which was undertaken to develop a process to chemically remove corrosion product deposits from the secondary side of pressurized water reactor (PWR) power plant steam generators. Results of this work have defined a process (solvent system and application methods) that is capable of removing sludge and tube-to-tube support plate crevice corrosion products generated during operation with all-volatile treatment (AVT) water chemistry. Considers a plant-specific test program that includes all materials in the steam generator to be cleaned and accounts for the physical locations (proximity and contact) of those materials. Points out that prior to applying the process in an operational unit, the utility, with the participation of the NSSR vendor, must define allowable total corrosion to the materials of construction of the unit

Modernity of parts in casting machines and coefficients of total productive maintenance

Directory of Open Access Journals (Sweden)

S. Borkowski

2010-10-01

Full Text Available The goal of this study is to investigate the impact of equipment efficiency in casting machines on the quality of die castings made of Al-Si alloys in consideration of their modernity. Analysis focused on two cold-chamber die-casting machines. The assessment of modernity ofthe equipment was made based on ABC analysis of technology and Parker’s scale. Then, the coefficients of total productive maintenance(TPM were employed for assessment of the efficiency of both machines. Using correlation coefficients r allowed authors to demonstrate the relationships between individual TPM coefficients and the number of non-conforming products. The finding of the study is pointing to the differences between the factors which determine the quality of castings resulting from the level of modernity of machines.

Total Content of Phenolics and Antioxidant Activity in Crispbreads with Plant By-product addition

Directory of Open Access Journals (Sweden)

Konrade Daiga

2017-11-01

Full Text Available Vegetable processing in food industry results in significant amount of by-products – peel, mark, bark, seeds still rich in bioactive compounds. Apple, carrot and pumpkin peel and mark may be used for production of crispbreads as functional ingredients. The objective of this study is to investigate the stability of total phenolic content (TPC and antioxidant activity after high temperature and short time (HTST extrusion cooking of a wheat and rice-based crispbreads with addition of apple, carrot and pumpkin by-products obtained after juice extraxtion and dried. Raw materials for crispbread production were wheat flour, rice flour, wheat bran (72%, 24% and 4% respectively with addition of microwave–vacuum dried by-product powder in different amount (5%, 10%, 15%, 20%. Extrusion process was performed by using a laboratory singlescrew extruder GÖTTFERT 1 screw Extrusiometer L series (Germany. Total phenolic content (TPC was determined using the Folin Ciocalteu method. Antioxidant activity was evaluated by free radical 2, 2-diphenyl-1-picrylhydrazyl (DPPH antioxidant scavenging activity using a modified colorimetric method. Comparing different raw formulations, it was observed that the TPC of the apple by-product flour was significantly higher (p < 0.05 than in carrot and pumpkin flour. TPC in cereal-based crispbread was 36.06±1.15 before extrusion and 13.90±1.01 mg GAEg-1 DW (milligram Gallic acid equivalent per 100 g of dry weight (mg GAE 100 g−1 DW after extrusion. Addition of apple BPF increased TPC in crispbreads to 106.25±2.08, carrot BPF 84.73±3.45 and pumpkin BPF to 108.82±1.04 mg GAEg−1 DW. Antioxidant activity of control sample was 1.07±0.01mg TE (Trolox equivalents g−1 DW but in samples with addition of 20% apple by-products, it reached 3.77±0.02 TE g−1 DW for samples wih 20% carrot by-products reached 2.52±0.03TE g−1 DW and for samples wih 20% pumpkin by-products reached 3.77±0.02 TE g−1 DW.

Nuclear power generation and fuel cycle report 1997

International Nuclear Information System (INIS)

1997-09-01

Nuclear power is an important source of electric energy and the amount of nuclear-generated electricity continued to grow as the performance of nuclear power plants improved. In 1996, nuclear power plants supplied 23 percent of the electricity production for countries with nuclear units, and 17 percent of the total electricity generated worldwide. However, the likelihood of nuclear power assuming a much larger role or even retaining its current share of electricity generation production is uncertain. The industry faces a complex set of issues including economic competitiveness, social acceptance, and the handling of nuclear waste, all of which contribute to the uncertain future of nuclear power. Nevertheless, for some countries the installed nuclear generating capacity is projected to continue to grow. Insufficient indigenous energy resources and concerns over energy independence make nuclear electric generation a viable option, especially for the countries of the Far East

Nuclear power generation and fuel cycle report 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Nuclear power is an important source of electric energy and the amount of nuclear-generated electricity continued to grow as the performance of nuclear power plants improved. In 1996, nuclear power plants supplied 23 percent of the electricity production for countries with nuclear units, and 17 percent of the total electricity generated worldwide. However, the likelihood of nuclear power assuming a much larger role or even retaining its current share of electricity generation production is uncertain. The industry faces a complex set of issues including economic competitiveness, social acceptance, and the handling of nuclear waste, all of which contribute to the uncertain future of nuclear power. Nevertheless, for some countries the installed nuclear generating capacity is projected to continue to grow. Insufficient indigenous energy resources and concerns over energy independence make nuclear electric generation a viable option, especially for the countries of the Far East.

Mining consumer reviews to generate ratings of different product attributes while producing feature-based review-summary

Science.gov (United States)

Kangale, Akshay; Krishna Kumar, S.; Arshad Naeem, Mohd; Williams, Mark; Tiwari, M. K.

2016-10-01

With the massive growth of the internet, product reviews increasingly serve as an important source of information for customers to make choices online. Customers depend on these reviews to understand users' experience, and manufacturers rely on this user-generated content to capture user sentiments about their product. Therefore, it is in the best interest of both customers and manufacturers to have a portal where they can read a complete comprehensive summary of these reviews in minimum time. With this in mind, we arrived at our first objective which is to generate a feature-based review-summary. Our second objective is to develop a predictive model to know the next week's product sales based on numerical review ratings and textual features embedded in the reviews. When it comes to product features, every user has different priorities for different features. To capture this aspect of decision-making, we have designed a new mechanism to generate a numerical rating for every feature of the product individually. The data have been collected from a well-known commercial website for two different products. The validation of the model is carried out using a crowd-sourcing technique.

The new scientific generation: a directory of thesis according to product types

International Nuclear Information System (INIS)

1995-12-01

A compilation of all masters theses and doctoral dissertations completed since 1993, or currently in progress in Quebec universities in the field of biomass research, or exploitation, was presented. Entries totaled 597 projects. Each entry provided the name of the student, the title of the thesis or dissertation, the name of the institution and the name of the principal supervisor, and a series of keywords characterizing the project. The theses were divided into six biomass-related sectors, i. e. chemical products and industrial materials, food products, health products, phytosanitary products, energy products and environmental products. The compilation was meant to foster an appreciation for the importance and diversity of biomass-related expertise and research in the Province of Quebec. tabs

Implementation of Total Productive Maintenance (TPM to Improve Sheeter Machine Performance

Directory of Open Access Journals (Sweden)

Candra Nofri Eka

2017-01-01

Full Text Available This paper purpose is an evaluation of TPM implementation, as a case study at sheeter machine cut size line 5 finishing department, PT RAPP, Indonesia. Research methodology collected the Overall Equipment Effectiveness (OEE data of sheeter machine and computed its scores. Then, OEE analysis big losses, statistical analysis using SPSS 20 and focused maintenance evaluation of TPM were performed. The data collected to machine sheeter’s production for 10 months (January-October 2016. The data analyses was resulted the OEE average score of 82.75%. This score was still below the world class OEE (85% and the company target (90%. Based the big losses of OEE analysis was obtained the reduce speed losses, which most significant losses of OEE scores. The reduce speed losses value was 44.79% of total losses during the research period. The high score of these losses due to decreasing of machine production speed by operators, which intended to improve the quality of resulting products. The OEE scores statistical analysis was found breakdown losses and reduces speed losses, which significantly affected to OEE scores. Implementations of focused maintenance of TPM in the case study may need to improve because there were still occurred un-expecting losses during the research period.

7th Annual NASA/Contractors Conference on Quality and Productivity: "Total Quality Leadership"

Science.gov (United States)

1991-01-01

More than 750 NASA, government, contractor, and academic representatives attended the Seventh Annual NASA/Contractors Conference on Quality and Productivity on October 12-13, 1990, in Grenelefe, Florida. The panel presentations and keynote speeches revolving around the theme of 'Total Quality Leadership' provided a solid base of understanding of the importance, benefits, and principles of total quality management. The implementation of these strategies is critical if we are to effectively pursue our mission of continuous quality improvement and reliability in our products, processess, and services. The annual NASA/contractors conferences serve as catalysts for achieving success in this mission. The conference was highlighted by the announcement of the first recipients of the George M. Low Trophy: NASA's Quality and Excellence Award. My congratulations go out to all nine finalist organizations and to the two recipients of this prestigious honor: Rockwell Space Systems Division and Marotta Scientific Controls, Inc. (the first small business to achieve this honor). These organizations have demonstrated a commitment to quality that is unsurpassed in the aerospace industry. This report summarizes the presentations and is not intended to be a verbatim proceedings document. You are encouraged to contact the speakers with any requests for further information.

Feasibility study on medical isotope production using a compact neutron generator.

Science.gov (United States)

Leung, Ka-Ngo; Leung, James K; Melville, Graeme

2018-07-01

Compact neutron generators can provide high flux of neutrons with energies ranging from thermal (0.025 eV) to 14 MeV. Recent measurements demonstrated high neutron yields from the D- 7 Li fusion reaction at an interaction energy of 500 keV. Using the D- 7 Li reaction and applying new advancements in high flux neutron generator technology along with the commercial availability of high voltage DC power supplies enables the production of useful quantities of radioisotopes for medical applications. Using the known neutron reaction cross-sections, it has been estimated that hundreds-to-thousands MBq (or tens-to-hundreds mCi) of 99 Mo, 225 Ac, 64 Cu and 67 Cu can be obtained from a compact high flux neutron generator. Copyright © 2018 Elsevier Ltd. All rights reserved.

Project Management and Total Quality Management : Complementary or confused?

Directory of Open Access Journals (Sweden)

Selma KATLANE BEN MLOUKA

2009-01-01

Full Text Available Quality management and project management appear as themes of strategic management today. The adoption of the project management constitutes a new way in organizing the production. It helps to cope with the complexity of the environment, to reduce the product life cycles and to make working arrangements more flexible. It should also adapt to the ICT revolution and restructuring of enterprises due to the dematerialisation of structures and transactions. Quality management, applied to more operations and strongly influenced by the quantitative approach seems compatible with project management. Indeed, the two paradigms emphasize the importance of customer satisfaction, teamwork, the role of leadership and the continuous improvement of processes and products. This paper aims to revisit the principles of relationship between total quality management and project management. Having shown the importance of incorporating fine patterns and project quality in business organization, we will explain how the ability to generate, select and conduct projects in an oriented accountability of management is able to enroll in a total quality.

Experimental study of a sustainable hybrid system for thermoelectric generation and freshwater production

Science.gov (United States)

de Souza, Gabriel Fernandes; Tan, Lippong; Singh, Baljit; Ding, Lai Chet; Date, Abhijit

2017-04-01

The paper presents a sustainable hybrid system, which is capable of generating electricity and producing freshwater from seawater using low grade heat source. This proposed system uses low grade heat that can be supplied from solar radiation, industrial waste heat or any other waste heat sources where the temperature is less than 150°C. The concept behind this system uses the Seebeck effect for thermoelectricity generation via incorporating the low boiling point of seawater under sub-atmospheric ambient pressure. A lab-test prototype of the proposed system was built and experimentally tested in RMIT University. The prototype utilised four commercial available thermoelectric generators (Bi2Te3) and a vacuum vessel to achieve the simultaneous production of electricity and freshwater. The temperature profiles, thermoelectric powers and freshwater productions were determined at several levels of salinity to study the influence of different salt concentrations. The theoretical description of system design and experimental results were analysed and discussed in detailed. The experiment results showed that 0.75W of thermoelectricity and 404g of freshwater were produced using inputs of 150W of simulated waste heat and 500g of 3% saline water. The proposed hybrid concept has demonstrated the potential to become the future sustainable system for electricity and freshwater productions.

Monte Carlo efficiency calibration of a neutron generator-based total-body irradiator

International Nuclear Information System (INIS)

Shypailo, R.J.; Ellis, K.J.

2009-01-01

Many body composition measurement systems are calibrated against a single-sized reference phantom. Prompt-gamma neutron activation (PGNA) provides the only direct measure of total body nitrogen (TBN), an index of the body's lean tissue mass. In PGNA systems, body size influences neutron flux attenuation, induced gamma signal distribution, and counting efficiency. Thus, calibration based on a single-sized phantom could result in inaccurate TBN values. We used Monte Carlo simulations (MCNP-5; Los Alamos National Laboratory) in order to map a system's response to the range of body weights (65-160 kg) and body fat distributions (25-60%) in obese humans. Calibration curves were constructed to derive body-size correction factors relative to a standard reference phantom, providing customized adjustments to account for differences in body habitus of obese adults. The use of MCNP-generated calibration curves should allow for a better estimate of the true changes in lean tissue mass that many occur during intervention programs focused only on weight loss. (author)

Developmental toward achieving the routine production of poly-zirconium chloride (PZC) 99mTC generator for domestic use

International Nuclear Information System (INIS)

Zulkifli Mohamed Hashim; Wan Anuar Wan Awang

2007-01-01

Radioisotope 99m Tc still dominates about 80% applications of nuclear technology in nuclear medicine field, and mainly used when labeled with pharmaceutical ligands to diagnose various types of cancerous diseases. This radioisotope now a day is obtained routinely from a radionuclide alumina types chromatographic column generator using a parent molybdenum-99 ( 99 Mo) radionuclide produced by (n,γ) or (n, fission) nuclear reaction. But recently, newly developed polymer of poly-zirconium chloride (PZC) has been proposed to be used as an alternative adsorbent column for the production of technetium generator. A PZC chromatographic column 99m Tc generator uses 99 Mo radioisotope obtained from 98 Mo(n,γ) 99 Mo method instead of 235 U(n,fission) 99 Mo method. The feasibility and practical studies of such generator has been extensively performed by the collaboration research between Japan Atomic Energy Research Institute (JAERI), KAKEN Co., and Forum for Nuclear Cooperation in Asia (FNCA) member state countries. The production procedure has been established and the conception design of the generator has been proposed at the previous series of FNCA workshop, and furthermore, a series of clinical test has been performed in a participating country. Prior to commercialization, a test run for routine production should be started immediately in a least one or two selected FNCA member countries. At a later stage, the PZC technetium generator is produced in a Good Manufacturing Practice (GMP) production laboratory for the purpose of data compilation and registration with the local drug control authority. In this paper, we propose to cooperate with participating organizations to perform the trial production of the generator by utilizing our present radioisotope production facilities and set-up. If this step is successful, then commercialize and marketing of PZC- 99m Tc-generator for domestic use looks more promising. (author)

Multi-Product Total Cost of Function for Higher Education: A Case of Bible Colleges.

Science.gov (United States)

Koshal, Rajindar K.; Koshal, Manjulika; Gupta, Ashok

2001-01-01

This study empirically estimates a multiproduct total cost function and output relationship for comprehensive U.S. universities. Statistical results for 184 Bible colleges suggest that there are both economies of scale and of scope in higher education. Additionally, product-specific economies of scope exist for all output levels and activities.…

Research on the perception of Skechers brand product design viewed by generation Y

OpenAIRE

Nováková, Michaela

2016-01-01

Title: Research on the perception of Skechers brand product design viewed by generation Y Goals: The main goal of the bachelor thesis is to find how generation Y perceives the sports shoes design of Skechers brand. To determine, which design factors are the most important during the selection of a sports shoes. An integral part of the thesis is to choose the most popular types of sports shoes, in the eyes of generation Y and also to find out how they perceive stoles of those shoes and their t...

Use of extremophilic bacteria for second generation bioethanol production

DEFF Research Database (Denmark)

Tomás, Ana Faria; Karakashev, Dimitar Borisov; Angelidaki, Irini

production from food crops, such as corn (starch) or sugar cane (sucrose) is already an established process, with the USA and Brazil supplying 86% of the market. The major challenge remains in the use of different waste sources – agricultural, forestry, animal and household waste - as a feedstock....... The recalcitrance of these materials and their diverse sugar composition make the industrial yeast strains currently used unsuitable for a second generation bioethanol production process. One of the alternative strategies is the use of extreme thermophilic microorganisms. Currently, selected members from the genera...... Clostridium, Thermoanaerobacter, Geobacillus and Thermoanaerobacterium are among the best candidates. A new strain of Thermoanaerobacter, closely related to T. italicus and T. mathranii, has achieved 0.43 gethanol/gxylose, which is 83% of the theoretical yield of ethanol based on xylose and the highest value...

Analysis of integrated animal-fish production system under subtropical hill agro ecosystem in India: growth performance of animals, total biomass production and monetary benefit.

Science.gov (United States)

Kumaresan, A; Pathak, K A; Bujarbaruah, K M; Vinod, K

2009-03-01

The present study assessed the benefits of integration of animals with fish production in optimizing the bio mass production from unit land in subtropical hill agro ecosystem. Hampshire pigs and Khaki Campbell ducks were integrated with composite fish culture. The pig and duck excreta were directly allowed into the pond and no supplementary feed was given to fish during the period of study. The average levels of N, P and K in dried pig and duck manure were 0.9, 0.7 and 0.6 per cent and 1.3, 0.6 and 0.5 per cent, respectively. The average body weight of pig and duck at 11 months age was 90 and 1.74 kg with an average daily weight gain of 333.33 and 6.44 g, respectively. The fish production in pig-fish and duck-fish systems were 2209 and 2964 kg/ha, respectively while the fish productivity in control pond was only 820 kg/ha. The total biomass (animal and fish) production was higher (pfeeding system compared to the traditional system, however the input/output ratio was 1:1.2 and 1:1.55 for commercial and traditional systems, respectively. It was inferred that the total biomass production per unit land was high (pfish were integrated together.

Exploration and production environment. Preserving the future our responsibility

International Nuclear Information System (INIS)

2004-01-01

This document presents the Total Group commitments to manage natural resources in a rational way, to preserve biodiversity for future generations and protect the environment. It contains the health, safety, environment and quality charter of Total, the 12 exploration and production health, safety and environment rules and the exploration and production environmental policy. (A.L.B.)

Gamma ray NDA assay system for total plutonium and isotopics in plutonium product solutions

International Nuclear Information System (INIS)

Cowder, L.R.; Hsue, S.T.; Johnson, S.S.; Parker, J.L.; Russo, P.A.; Sprinkle, J.K.; Asakura, Y.; Fukuda, T.; Kondo, I.

1979-01-01

A LASL-designed gamma-ray NDA instrument for assay of total plutonium and isotopics of product solutions at Tokai-Mura is currently installed and operating. The instrument is, optimally, a densitometer that uses radioisotopic sources for total plutonium measurements at the K absorption edge. The measured transmissions of additional gamma-ray lines from the same radioisotopic sources are used to correct for self-attenuation of passive gamma rays from plutonium. The corrected passive data give the plutonium isotopic content of freshly separated to moderately aged solutions. This off-line instrument is fully automated under computer control, with the exception of sample positioning, and operates routinely in a mode designed for measurement control. A one-half percent precision in total plutonium concentration is achieved with a 15-minute measurement

Organizational Culture Influence on Total Productive Maintenance (TPM) and Operational Performance Using RASCH Model Analysis

OpenAIRE

Mohd Asaad, Mohd Norhasni; Yusoff, Rushami Zien

2013-01-01

Abstract. Market globalization, competitive product and services, high economic crises are the most critical factors that influence the success of the manufacturing companies in global market. Therefore it is critical to the manufacturing companies to be efficient in production and lean tool may used to achieve that.  The most frequently used is the Total Preventive Maintenance (TPM), even though there are many studies have been conducted in relation to the TPM but there is limited research i...

Landsat Data Continuity Mission (LDCM) Standard Product Generation and Characteristics

Science.gov (United States)

Micijevic, E.; Hayes, R.

2012-12-01

The LDCM's Landsat 8 (L8), planned for launch in February 2013, is the latest satellite in the 40 year history of the Landsat program. The satellite will have two imagers: the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS). The data from both sensors will be processed and combined into the final Level 1 Terrain (L1T) standard product by the Landsat Product Generation System (LPGS) at the USGS Earth Resources Observation and Science (EROS). Landsat 8 products will nominally have 11 image bands; however, products will still be created if OLI only, or TIRS only collections are acquired. The LPGS is designed to create L1T products from Level 0 data by merging OLI and TIRS outputs and performing systematic radiometric and geometric corrections, followed by precision and terrain corrections that include Ground Control Points (GCP), and a Digital Elevation Model (DEM) for topographic accuracy. Scenes that have a quality score of 9 or greater and a percent cloud cover less than 40 will be automatically processed. In addition, any archived scene, regardless of cloud cover, can be requested for processing through USGS EROS clients, GloVis or Earth Explorer. While most data will be processed as Level L1T, some scenes will not have ground control or elevation data necessary for precision or terrain correction, respectively. In these cases, the best level of correction will be applied (Level 1G-systematic or Level 1Gt-systematic terrain). The standard Level 1T products will contain scaled Top of Atmosphere (TOA) reflectance data, only for OLI. The conversion between radiance and reflectance within radiometric processing (L1R) will be performed using the band specific coefficients that are proportional to the respective exoatmospheric solar irradiances and the Earth-Sun distance for the scene's acquisition day. The TIRS data will contain scaled at-sensor radiances and no at-sensor brightness temperature or emissivity conversions are planned. For users that

A Column-Generation Approach for a Short-Term Production Planning Problem in Closed-Loop Supply Chains

Directory of Open Access Journals (Sweden)

Florian Sahling

2013-05-01

Full Text Available We present a new model formulation for a multi-product lot-sizing problem with product returns and remanufacturing subject to a capacity constraint. The given external demand of the products has to be satisfied by remanufactured or newly produced goods. The objective is to determine a feasible production plan, which minimizes production, holding, and setup costs. As the LP relaxation of a model formulation based on the well-known CLSP leads to very poor lower bounds, we propose a column-generation approach to determine tighter bounds. The lower bound obtained by column generation can be easily transferred into a feasible solution by a truncated branch-and-bound approach using CPLEX. The results of an extensive numerical study show the high solution quality of the proposed solution approach.

Total Productivity Management in Small Industries

OpenAIRE

FARAJPOUR-KHANAPOSHTANI, Ghassem; HAYATI, Seyyed Iman

2015-01-01

Abstract. The importance of small businesses and SME's has been well established in the literature of the world economy. Thus, both industrialized and developing countries, development, support of small businesses as part and parcel of their productivity strategies have. Small industries are a major driver of employment, economic growth and productivity. About 80% of all companies in the world are less than 10 cases of human resources, so 95% of industries in the UK, Spain and Finland and 94 ...

Ozone pretreatment of process waste water generated in course of fluoroquinolone production.

Science.gov (United States)

Daoud, Fares; Pelzer, David; Zuehlke, Sebastian; Spiteller, Michael; Kayser, Oliver

2017-10-01

During production of active pharmaceutical ingredients, process waste water is generated at several stages of manufacturing. Whenever possible, the resulting waste water will be processed by conventional waste water treatment plants. Currently, incineration of the process waste water is the method to eliminate compounds with high biological activity. Thus, ozone treatment followed by biological waste water treatment was tested as an alternative method. Two prominent representatives of the large group of fluoroquinolone antibiotics (ciprofloxacin and moxifloxacin) were investigated, focussing on waste water of the bulk production. Elimination of the target compounds and generation of their main transformation products were determined by liquid chromatography - high resolution mass spectrometry (LC-HRMS). The obtained results demonstrated, that the concentration of moxifloxacin and its metabolites can be effectively reduced (>99.7%) prior entering the receiving water. On the contrary, the concentration of ciprofloxacin and its metabolites remained too high for safe discharge, necessitating application of prolonged ozonation for its further degradation. The required ozonation time can be estimated based on the determined kinetics. To assure a low biological activity the ecotoxicity of the ozonated waste water was investigated using three trophic levels. By means of multiple-stage mass spectrometry (MS n ) experiments several new transformation products of the fluoroquinolones were identified. Thus, previously published proposed structures could be corrected or confirmed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quantitative Analysis of Language Production in Parkinson's Disease Using a Cued Sentence Generation Task

Science.gov (United States)

Vanhoutte, Sarah; De Letter, Miet; Corthals, Paul; Van Borsel, John; Santens, Patrick

2012-01-01

The present study examined language production skills in Parkinson's disease (PD) patients. A unique cued sentence generation task was created in order to reduce demands on memory and attention. Differences in sentence production abilities according to disease severity and cognitive impairments were assessed. Language samples were obtained from 20…

Evaluation of Rambouillet, Polypay, and Romanov-White Dorper x Rambouillet ewes mated to terminal sires in an extensive rangeland production system: Lamb production

Science.gov (United States)

Ewe productivity (i.e., total numbers or weight of lamb weaned ÷ number of breeding ewes) is a key indicator of lamb production efficiency. This second-generation study compared various measures of ewe productivity and ewe and lamb performance in an extensive rangeland production system of ewes of 3...

Gel Generator Technology Viability for Small Scale Production - Indian Experience [Country report: India - GEL Gen.

International Nuclear Information System (INIS)

Sarkar, S.K.; Kothalkar, C.; Naskar, P.; Sneha, P.; Saraswathy, P.; Dey, A.C.; Venkatesh, Meera

2015-01-01

The radioisotope 99m Tc is used in nearly 80% of all diagnostic imaging procedures in nuclear medicine and hence ensuring its uninterrupted availability is of prime importance to the nuclear medicine industry. Of the various options available for accessing 99m Tc from its precursor 99 Mo through a generator system, the 99m Tc generator using a bed of acidic alumina column for column chromatographic separation of 99m Tc from 99 Mo remains the most popular procedure world over. The uninterrupted availability of high specific activity (n,f) 99 Mo, an essential requirement for the alumina column generators and produced by few large scale commercial suppliers, needs to be ensured to avoid frequent disruption in 99m Tc supplies. Alternate technologies that could use (n,γ) 99 Mo to meet partial/complete domestic demands are worth exploring to reduce import dependency/foster self-sufficiency particularly in countries having the necessary infrastructure in place. The Indian pursuit of gel generator technology for 99m Tc was driven mainly by three considerations, namely, (i) reliable, well-established and ease of production of (n,γ) 99 Mo in TBq quantities in the research reactors in Trombay/Mumbai, India, (ii) need for relatively low-cost alternate technology to replace the solvent (MEK) extraction generator system in use in India since 1970s and (iii) minimize dependency on weekly import of fission-produced 99 Mo raw material required for alumina column generator. The development of column type 99m Tc generator based on conversion of (n,γ) 99 Mo as zirconium molybdate- 99 Mo (ZrM) gel matrix and subsequent separation of 99m Tc by elution in normal saline was an important development in this direction, as this combines the advantages of using (n,γ) 99 Mo and a column based separation technique. A considerable volume of work was carried out at the Board of Radiation and Isotope Technology (BRIT) both independently and as a part of IAEA’s CRP [4,9] for standardization

A neutron detector for measurement of total neutron production cross sections

Energy Technology Data Exchange (ETDEWEB)

Sekharan, K K; Laumer, H; Kern, B D; Gabbard, F [Kentucky Univ., Lexington (USA). Dept. of Physics and Astronomy

1976-03-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight /sup 10/BF/sub 3/ counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from /sup 7/Li(p, n)/sup 7/Be. By adjusting the radial positions of the BF/sub 3/ counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from /sup 51/V(p, n)/sup 51/Cr and /sup 57/Fe(p, n)/sup 57/Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given.

Organic, inorganic and total mercury determination in fish by chemical vapor generation with collection on a gold gauze and electrothermal atomic absorption spectrometry

International Nuclear Information System (INIS)

Duarte, Fabio Andrei; Bizzi, Cezar Augusto; Goldschmidt Antes, Fabiane; Dressler, Valderi Luiz; Flores, Erico Marlon de Moraes

2009-01-01

A method for organic, inorganic and total mercury determination in fish tissue has been developed using chemical vapor generation and collection of mercury vapor on a gold gauze inside a graphite tube and further atomization by electrothermal atomic absorption spectrometry. After drying and cryogenic grinding, potassium bromide and hydrochloric acid solution (1 mol L - 1 KBr in 6 mol L - 1 HCl) was added to the samples. After centrifugation, total mercury was determined in the supernatant. Organomercury compounds were selectively extracted from KBr solution using chloroform and the resultant solution was back extracted with 1% m/v L-cysteine. This solution was used for organic Hg determination. Inorganic Hg remaining in KBr solution was directly determined by chemical vapor generation electrothermal atomic absorption spectrometry. Mercury vapor generation from extracts was performed using 1 mol L - 1 HCl and 2.5% m/v NaBH 4 solutions and a batch chemical vapor generation system. Mercury vapor was collected on the gold gauze heated resistively at 80 deg. C and the atomization temperature was set at 650 deg. C. The selectivity of extraction was evaluated using liquid chromatography coupled to chemical vapor generation and determination by inductively coupled plasma mass spectrometry. The proposed method was applied for mercury analysis in shark, croaker and tuna fish tissues. Certified reference materials were used to check accuracy and the agreement was better than 95%. The characteristic mass was 60 pg and method limits of detection were 5, 1 and 1 ng g - 1 for organic, inorganic and total mercury, respectively. With the proposed method it was possible to analyze up to 2, 2 and 6 samples per hour for organic, inorganic and total Hg determination, respectively.

Status and trends in the development of Total Productive Maintenance (TPM) - a review of international articles

DEFF Research Database (Denmark)

Andreassen, Mads; Gertsen, Frank; Christiansen, Thomas Bøhm

2004-01-01

Corporate continuous innovation efforts are often guided by (more or less) customized standard management concepts such as "TQM", "BPR" or "Lean". The focus of this article, Total Productive Maintenance (TPM), is a contemporary example of such a concept. Although the concept first appeared more...... maintenance and high efficiency of the production facilities. However, during the last ten years, the concepthas been developed into a company wide (management)concept, also compromising efficiency in the administrative part of a company, safety and environmental aspects, as well as product quality. Based...

Ribosome display: next-generation display technologies for production of antibodies in vitro.

Science.gov (United States)

He, Mingyue; Khan, Farid

2005-06-01

Antibodies represent an important and growing class of biologic research reagents and biopharmaceutical products. They can be used as therapeutics in a variety of diseases. With the rapid expansion of proteomic studies and biomarker discovery, there is a need for the generation of highly specific binding reagents to study the vast number of proteins encoded by the genome. Display technologies provide powerful tools for obtaining antibodies. Aside from the preservation of natural antibody repertoires, they are capable of exploiting diversity by DNA recombination to create very large libraries for selection of novel molecules. In contrast to in vivo immunization processes, display technologies allow selection of antibodies under in vitro-defined selection condition(s), resulting in enrichment of antibodies with desired properties from large populations. In addition, in vitro selection enables the isolation of antibodies against difficult antigens including self-antigens, and this can be applied to the generation of human antibodies against human targets. Display technologies can also be combined with DNA mutagenesis for antibody evolution in vitro. Some methods are amenable to automation, permitting high-throughput generation of antibodies. Ribosome display is considered as representative of the next generation of display technologies since it overcomes the limitations of cell-based display methods by using a cell-free system, offering advantages of screening larger libraries and continuously expanding new diversity during selection. Production of display-derived antibodies can be achieved by choosing one of a variety of prokaryotic and eukaryotic cell-based expression systems. In the near future, cell-free protein synthesis may be developed as an alternative for large-scale generation of antibodies.

A draft business plan for the production of PZC 99Mo-99mTc generator in the Philippines

International Nuclear Information System (INIS)

Sombrito, Elvira Z.; Cabalfin, Estelita G.; Calix, Virginia S.; Dela Rosa, Alumanda M.; Borras, Ma. Teresa L.; Bulos, Adelina dM.

2007-01-01

Technetium-99m ( 99m Tc) remains as the main workhorse of nuclear medicine in the country. Alone or conjugated with other ligands, it is being used to show the function of major organs and other tissues such as the lung, brain, kidney, liver and bone. It is imported to the country as 99 Mo- 99m Tc generator. These commercial generators use fission molybdenum adsorbed onto alumina column. The FNCA project has shown the feasibility of using a PZC column-reactor 99 Mo generator for commercial applications, citing mainly the cheaper cost of the PZC generator than the imported alumina column-fission 99 Mo generator. PNRI proposes in this draft business plan, the commercial production of PZC generator through the establishment of a facility for the in-house production of 99 Mo- 99m Tc generator. The generator will use PZC coming from Japan as the column material, 99 Mo sourced from neighboring countries and an automatic loading and adsorption machine. Because the PNRI has no local production of the generator, the requirements for successfully venturing into this business activity may differ from the other FNCA members. A careful assessment based on verified data will be needed to refine the business plan. (author)

Characteristics of products generated by selective sintering and stereolithography rapid prototyping processes

Science.gov (United States)

Cariapa, Vikram

1993-01-01

The trend in the modern global economy towards free market policies has motivated companies to use rapid prototyping technologies to not only reduce product development cycle time but also to maintain their competitive edge. A rapid prototyping technology is one which combines computer aided design with computer controlled tracking of focussed high energy source (eg. lasers, heat) on modern ceramic powders, metallic powders, plastics or photosensitive liquid resins in order to produce prototypes or models. At present, except for the process of shape melting, most rapid prototyping processes generate products that are only dimensionally similar to those of the desired end product. There is an urgent need, therefore, to enhance the understanding of the characteristics of these processes in order to realize their potential for production. Currently, the commercial market is dominated by four rapid prototyping processes, namely selective laser sintering, stereolithography, fused deposition modelling and laminated object manufacturing. This phase of the research has focussed on the selective laser sintering and stereolithography rapid prototyping processes. A theoretical model for these processes is under development. Different rapid prototyping sites supplied test specimens (based on ASTM 638-84, Type I) that have been measured and tested to provide a data base on surface finish, dimensional variation and ultimate tensile strength. Further plans call for developing and verifying the theoretical models by carefully designed experiments. This will be a joint effort between NASA and other prototyping centers to generate a larger database, thus encouraging more widespread usage by product designers.

A cross-country analysis of total factor productivity using micro-level data

Directory of Open Access Journals (Sweden)

Murat Şeker

2018-03-01

Full Text Available Total factor productivity (TFP is a crucial measure of efficiency and thus an important tool for policymakers. However, research on comparison of TFP performances using micro-level data across developing countries has been limited due to the unavailability of homogenous data sources. This study aims to fill this crucial gap by using a data set which has been collected through a large body of surveys conducted across 69 developing countries following the same methodology. The homogenous nature of the data and the diverse set of questions included in the surveys provide unique opportunity to compare average productivity performances of firms across a large set of characteristics and business environment factors. The analysis performed here provides the groundwork for testing various stylized facts about TFP and its related factors such as exporting, innovation, access to finance, foreign ownership, and regulations across developing countries.

Use of disposable reactors to generate inoculum cultures for E. coli production fermentations.

Science.gov (United States)

Mahajan, Ekta; Matthews, Timothy; Hamilton, Ryan; Laird, Michael W

2010-01-01

Disposable technology is being used more each year in the biotechnology industry. Disposable bioreactors allow one to avoid expenses associated with cleaning, assembly and operations, as well as equipment validation. The WAVE bioreactor is well established for Chinese Hamster Ovary (CHO) production, however, it has not yet been thoroughly tested for E. coli production because of the high oxygen demand and temperature maintenance requirements of that platform. The objective of this study is to establish a robust process to generate inoculum for E. coli production fermentations in a WAVE bioreactor. We opted not to evaluate the WAVE system for production cultures because of the high cell densities required in our current E. coli production processes. Instead, the WAVE bioreactor 20/50 system was evaluated at laboratory scale (10-L) to generate inoculum with target optical densities (OD(550)) of 15 within 7-9 h (pre-established target for stainless steel fermentors). The maximum settings for rock rate (40 rpm) and angle (10.5) were used to maximize mass transfer. The gas feed was also supplemented with additional oxygen to meet the high respiratory demand of the culture. The results showed that the growth profiles for the inoculum cultures were similar to those obtained from conventional stainless steel fermentors. These inoculum cultures were subsequently inoculated into 10-L working volume stainless steel fermentors to evaluate the inocula performance of two different production systems during recombinant protein production. The results of these production cultures using WAVE inocula showed that the growth and recombinant protein production was comparable to the control data set. Furthermore, an economic analysis showed that the WAVE system would require less capital investment for installation and operating expenses would be less than traditional stainless steel systems. (c) 2010 American Institute of Chemical Engineers

A novel automated direct measurement method for total antioxidant capacity using a new generation, more stable ABTS radical cation.

Science.gov (United States)

Erel, Ozcan

2004-04-01

To develop a novel colorimetric and automated direct measurement method for total antioxidant capacity (TAC). A new generation, more stable, colored 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid radical cation (ABTS(*+)) was employed. The ABTS(*+) is decolorized by antioxidants according to their concentrations and antioxidant capacities. This change in color is measured as a change in absorbance at 660 nm. This process is applied to an automated analyzer and the assay is calibrated with Trolox. The novel assay is linear up to 6 mmol Trolox equivalent/l, its precision values are lower than 3%, and there is no interference from hemoglobin, bilirubin, EDTA, or citrate. The method developed is significantly correlated with the Randox- total antioxidant status (TAS) assay (r = 0.897, P total antioxidant capacity.

Very High Efficiency Reactor (VHER) Concepts for Electrical Power Generation and Hydrogen Production

International Nuclear Information System (INIS)

PARMA JR, EDWARD J.; PICKARD, PAUL S.; SUO-ANTTILA, AHTI JORMA

2003-01-01

The goal of the Very High Efficiency Reactor study was to develop and analyze concepts for the next generation of nuclear power reactors. The next generation power reactor should be cost effective compared to current power generation plant, passively safe, and proliferation-resistant. High-temperature reactor systems allow higher electrical generating efficiencies and high-temperature process heat applications, such as thermo-chemical hydrogen production. The study focused on three concepts; one using molten salt coolant with a prismatic fuel-element geometry, the other two using high-pressure helium coolant with a prismatic fuel-element geometry and a fuel-pebble element design. Peak operating temperatures, passive-safety, decay heat removal, criticality, burnup, reactivity coefficients, and material issues were analyzed to determine the technical feasibility of each concept

Feeding of Total Mixed Ration on the Productivity of Friesian Holstein Cross-Grade Cattle

Science.gov (United States)

Sunarso; Christiyanto, M.; Nuswantara, L. K.

2018-02-01

An experiment was conducted to evaluate feeding of total mixed ration (TMR) on the productivity of Friesian Holstein (FH) male cross-grade cattle at Semarang Municipality. TMR was a ration formulated with agricultural and agro-industrial by-product (no grass and/or green forage were used) to fulfilled the nutrient requirement of beef cattle. Total mixed ration were formulated on iso-energy of 66% of total digestible nutrients (TDN) and different level of crude protein (CP) content of 11%, 12%, 13%, and 14%. Twenty (20) heads of FH male cross-grade cattle with initial body weight of 292.40+33.06 kg were used in this experiment, and were arranged into 5 treatments T0, T1, T2, T3, and T4), and 4 replications. Data collected were analysed statistically using analyses of variance (Anova) based on the completely randomized design (CRD), then followed by Duncan’s Multiple Range Test (DMRT) for different among treatments. Results of the experiment showed significantly different effect (P0.05) on feed conversion ratio (FCR), and feed efficiency. Others parameter showed that there were no significantly different (P>0.05) effect on the dry matter and organic matter digestibility in vitro, rumen ammonia concentration, and volatile fatty acid’s rumen concentration. It was concluded that feeding TMR was potentially prospected for fattening of beef cattle, particularly as feeding strategy when there was no grass and/or green forage anymore.

Increasing the total productivity of a land by combining mobile photovoltaic panels and food crops

International Nuclear Information System (INIS)

Valle, B.; Simonneau, T.; Sourd, F.; Pechier, P.; Hamard, P.; Frisson, T.; Ryckewaert, M.; Christophe, A.

2017-01-01

Highlights: •Combining solar panels and crops on the same land increases the total productivity. •Use of solar trackers permits to balance or promote food/energy production. •Controlling mode of trackers strongly affect the total production per unit area. •Dynamic agrivoltaic systems increases productivity without competing with food. -- Abstract: Agrivoltaic systems, consisting of the combination of photovoltaic panels (PVPs) with crops on the same land, recently emerged as an opportunity to resolve the competition for land use between food and energy production. Such systems have proved efficient when using stationary PVPs at half their usual density. Dynamic agrivoltaic systems improved the concept by using orientable PVPs derived from solar trackers. They offer the possibility to intercept the variable part of solar radiation, as well as new means to increase land productivity. The matter was analysed in this work by comparing fixed and dynamic systems with two different orientation policies. Performances of the resulting agrivoltaic systems were studied for two varieties of lettuce over three different seasons. Solar tracking systems placed all plants in a new microclimate where light and shade bands alternated several times a day at any plant position, while stationary systems split the land surface into more stable shaded and sunlit areas. In spite of these differences, transient shading conditions increased plant leaf area in all agrivoltaic systems compared to full-sun conditions, resulting in a higher conversion of the transmitted radiation by the crop. This benefit was lower during seasons with high radiation and under controlled tracking with more light transmitted to the crop. As expected, regular tracking largely increased electric production compared to stationary PVPs but also slightly increased the transmitted radiation, hence crop biomass. A large increase in transmitted radiation was achieved by restricting solar tracking around midday

Impact-parameter dependence of the total probability for electromagnetic electron-positron pair production in relativistic heavy-ion collisions

International Nuclear Information System (INIS)

Hencken, K.; Trautmann, D.; Baur, G.

1995-01-01

We calculate the impact-parameter-dependent total probability P total (b) for the electromagnetic production of electron-positron pairs in relativistic heavy-ion collisions in lowest order. We study expecially impact parameters smaller than the Compton wavelength of the electron, where the equivalent-photon approximation cannot be used. Calculations with and without a form factor for the heavy ions are done; the influence is found to be small. The lowest-order results are found to violate unitarity and are used for the calculation of multiple-pair production probabilities with the help of the approximate Poisson distribution already found in earlier publications

Cassava processing wastewater as a platform for third generation biodiesel production

Directory of Open Access Journals (Sweden)

Cristina Neves

Full Text Available ABSTRACT This study aimed to evaluate third generation biodiesel production by microalgae Phormidium autumnale using cassava processing wastewater as a platform. Experiments were performed in a heterotrophic bubble column bioreactor. The study focused on the evaluation of the bioreactor (batch and fed-batch of different operational modes and the analysis of biofuel quality. Results indicate that fed-batch cultivations improved system performance, elevating biomass and oil productions to 12.0 g L−1 and 1.19 g L−1, respectively. The composition of this oil is predominantly saturated (60 % and monounsaturated (39 %, resulting in a biodiesel that complys with U.S., European and Brazilian standards. The technological route developed indicates potential for sustainable production of bulk oil and biodiesel, through the minimization of water and chemical demands required to support such a process.

Effect of pH buffering capacity and sources of dietary sulfur on rumen fermentation, sulfide production, methane production, sulfate reducing bacteria, and total Archaea in in vitro rumen cultures.

Science.gov (United States)

Wu, Hao; Meng, Qingxiang; Yu, Zhongtang

2015-06-01

The effects of three types of dietary sulfur on in vitro fermentation characteristics, sulfide production, methane production, and microbial populations at two different buffer capacities were examined using in vitro rumen cultures. Addition of dry distilled grain with soluble (DDGS) generally decreased total gas production, degradation of dry matter and neutral detergent fiber, and concentration of total volatile fatty acids, while increasing ammonia concentration. High buffering capacity alleviated these adverse effects on fermentation. Increased sulfur content resulted in decreased methane emission, but total Archaea population was not changed significantly. The population of sulfate reducing bacteria was increased in a sulfur type-dependent manner. These results suggest that types of dietary sulfur and buffering capacity can affect rumen fermentation and sulfide production. Diet buffering capacity, and probably alkalinity, may be increased to alleviate some of the adverse effects associated with feeding DDGS at high levels. Copyright © 2015 Elsevier Ltd. All rights reserved.

Production statistics of gas turbines and superchargers in Japan in 1992

Energy Technology Data Exchange (ETDEWEB)

Honma, T [Toshiba Corp., Tokyo (Japan)

1994-03-01

Production of gas turbines and superchargers in Japan in 1992 was summarized giving various production statistics. In land and marine gas turbines, the total production decreased by 2% in unit, however, increased rapidly by 84% in total power output due to a remarkable increase in large unit over and including 30,000 PS, exceeding the total power output of 5,000 MW. The production of small units less than 1,000 PS decreased in both unit and power output, and all the units were for private use of which 96% were emergency power generation use. The production of medium units decreased in both unit and power output, including a remarkable decrease in unit by 26% and in power output by 38% for base load generation use. In aircraft gas turbines, the production in 1992 decreased by 0-10%, however, 89 fan modules of V2500 turbofan engine were produced, summing up into 273 units since 1988. Most of superchargers produced in 1992 were of class 1 below 100 mm in impeller diameter, reaching 1,720,000 units. 10 figs., 9 tabs.

Guiding New Product Idea Generation

Science.gov (United States)

Park, Y.

2003-01-01

The creation of innovative ideas is the initial step in entrepreneurial practice and venture management. As the management of technology is now on the priority agenda of higher education institutions, there is a need to develop pedagogic schemes for idea generation. Despite its importance, the idea generation process is hard to systematize or to…

BEEC: An event generator for simulating the Bc meson production at an e+e- collider

Science.gov (United States)

Yang, Zhi; Wu, Xing-Gang; Wang, Xian-You

2013-12-01

The Bc meson is a doubly heavy quark-antiquark bound state and carries flavors explicitly, which provides a fruitful laboratory for testing potential models and understanding the weak decay mechanisms for heavy flavors. In view of the prospects in Bc physics at the hadronic colliders such as Tevatron and LHC, Bc physics is attracting more and more attention. It has been shown that a high luminosity e+e- collider running around the Z0-peak is also helpful for studying the properties of Bc meson and has its own advantages. For this purpose, we write down an event generator for simulating Bc meson production through e+e- annihilation according to relevant publications. We name it BEEC, in which the color-singlet S-wave and P-wave (cb¯)-quarkonium states together with the color-octet S-wave (cb¯)-quarkonium states can be generated. BEEC can also be adopted to generate the similar charmonium and bottomonium states via the semi-exclusive channels e++e-→|(QQ¯)[n]>+Q+Q¯ with Q=b and c respectively. To increase the simulation efficiency, we simplify the amplitude as compact as possible by using the improved trace technology. BEEC is a Fortran program written in a PYTHIA-compatible format and is written in a modular structure, one may apply it to various situations or experimental environments conveniently by using the GNU C compiler make. A method to improve the efficiency of generating unweighted events within PYTHIA environment is proposed. Moreover, BEEC will generate a standard Les Houches Event data file that contains useful information of the meson and its accompanying partons, which can be conveniently imported into PYTHIA to do further hadronization and decay simulation. Catalogue identifier: AEQC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEQC_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in

Exponentiation for products of Wilson lines within the generating function approach

International Nuclear Information System (INIS)

Vladimirov, A.A.

2015-01-01

We present the generating function approach to the perturbative exponentiation of correlators of a product of Wilson lines and loops. The exponentiated expression is presented in closed form as an algebraic function of correlators of known operators, which can be seen as a generating function for web diagrams. The expression is naturally split onto two parts: the exponentiation kernel, which accumulates all non-trivial information about web diagrams, and the defect of exponentiation, which reconstructs the matrix exponent and is a function of the exponentiation kernel. The detailed comparison of the presented approach with existing approaches to exponentiation is presented as well. We also give examples of calculations within the generating function exponentiation, namely, we consider different configurations of light-like Wilson lines in the multi-gluon-exchange-webs (MGEW) approximation. Within this approximation the corresponding correlators can be calculated exactly at any order of perturbative expansion by only algebraic manipulations. The MGEW approximation shows violation of the dipole formula for infrared singularities at three-loop order.

Radioactive Waste Management Produced from the Generator Tc-99m Products

International Nuclear Information System (INIS)

Suhaedi Muhammad; Rimin Sumantri; Affan Ahmad; Tuyono

2012-01-01

Generator Tc-99m product is used in hospitals will result in radioactive waste both solid waste in the form of a column compacted Tc-99m Generator, bottles vials and bottles of saline fluid path series: burning of solid waste in the form of paper straw, hand gloves, and cardboard (vial packing boxes and wrapping Generator) and liquid waste form leaching results lead pot and enclosure. So that these wastes pose no radiological consequences for both humans and the environment, it must be properly managed in accordance with the provisions. In order to realize these expectations should be made so that the radioactive waste management system can be handled effectively, optimal, economical, safe and secure and in accordance with applicable regulations. Management system is in it include: procedures for handling radioactive waste, solid waste compacted, burning of solid waste management, liquid waste handling, shipment of radioactive waste and determination of the amount of radiation doses received by workers who handle radioactive waste. (author)

In vitro degradability and total gas production of biodiesel chain byproducts used as a replacement for cane sugar feed

Directory of Open Access Journals (Sweden)

Milenna Nunes Moreira

2014-09-01

Full Text Available This study aimed to determine the in vitro degradability of dry matter and the total gas production of oil seed press cake from biodiesel production (Gossypium hirsutum L., Helianthus annuus L., Ricinus communis, Moringa oleífera L. and Pinhão manso curcas L. at four different levels of replacement (0, 30, 50, and 70% for cane sugar (Saccharum officinarum RB. in ruminant feed. Inocula were prepared using the ruminal fluid of three Holstein cows, and data were collected after 48 hours of incubation. The byproducts of Moringa had the highest degradability, and castor presented the lowest values at all evaluated levels of replacement. Castor bean byproduct showed the highest total gas production, cotton showed the lowest production, and the byproduct of Moringa at the 70% level showed the best ruminal fermentation results. These results demonstrate that the use of oil seed press cake from biodiesel production (Helianthus annuus L. and Ricinus communis can replace cane sugar in ruminant feed.

Graft Product for Autologous Peripheral Blood Stem Cell Transplantation Enhances Thrombin Generation and Expresses Procoagulant Microparticles and Tissue Factor.

Science.gov (United States)

Sidibe, Fatoumata; Spanoudaki, Anastasia; Vanneaux, Valerie; Mbemba, Elisabeth; Larghero, Jerome; Van Dreden, Patrick; Lotz, Jean-Pierre; Elalamy, Ismail; Larsen, Annette K; Gerotziafas, Grigoris T

2018-05-01

The beneficial effect of autologous peripheral blood stem cell transplantation (APBSCT) may be compromised by acute vascular complications related to hypercoagulability. We studied the impact of graft product on thrombin generation of normal plasma and the expression of tissue factor (TF) and procoagulant platelet-derived procoagulant microparticles (Pd-MPs) in samples of graft products. Graft products from 10 patients eligible for APBSCT were mixed with platelet-poor plasma (PPP) or platelet-rich plasma (PRP) from healthy volunteers and assessed for in vitro thrombin generation. In control experiments, thrombin generation was assessed in (1) PPP and PRP without any exogenous TF and/or procoagulant phospholipids, (2) PPP with the addition of TF (5 pM) and procoagulant phospholipids (4 μM), (3) in PRP with the addition of TF (5 pM). Graft products were assessed with Western blot assay for TF expression, with a specific clotting assay for TF activity and with flow cytometry assay for Pd-MPs. The graft product enhanced thrombin generation and its procoagulant activity was related to the presence of Pd-MPs and TF. The concentration of Pd-MPs in the graft product was characterized by a significant interindividual variability. The present study reveals the need for a thorough quality control of the graft products regarding their procoagulant potential.

Total peroxy nitrates and ozone production : analysis of forest fire plumes during BORTAS campaign

Science.gov (United States)

Busilacchio, Marcella; Di Carlo, Piero; Aruffo, Eleonora; Biancofiore, Fabio; Giammaria, Franco; Bauguitte, Stephane; Lee, James; Moller, Sarah; Lewis, Ally; Parrington, Mark; Palmer, Paul; Dari Salisburgo, Cesare

2014-05-01

The goal of this work is to investigate the connection between PNS and ozone within plumes emitted from boreal forest fires and the possible perturbation to oxidant chemistry in the troposphere. During the Aircraft campaign in Canada called BORTAS (summer 2011 ) were carried out several profiles from ground up to 10 km with the BAe-146 aircraft to observe the atmospheric composition inside and outside fire plumes. The BORTAS flights have been selected based on the preliminary studies of 'Plume identification', selecting those effected by Boreal forest fire emissions (CO > 200 ppbv). The FLAMBE fire counts were used concertedly with back trajectory calculations generated by the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model to locate the sources of Boreal biomass burning.Profiles measured on board the BAe-146 aircraft are used to calculate the productions of PNs and O3 within the biomass burning plume. By selecting the flights that intercept the biomass burning plume, we evaluate the ratio between the ozone production and the PNs production within the plume. Analyzing this ratio it is possible to determine whether O3 production or PNs production is the dominant process in the biomass burning boreal plume detected during BORTAS campaign.

Total 2003 Results

International Nuclear Information System (INIS)

2003-01-01

This document presents the 2003 results of Total Group: consolidated account, special items, number of shares, market environment, 4. quarter 2003 results, full year 2003 results, upstream (key figures, proved reserves), downstream key figures, chemicals key figures, parent company accounts and proposed dividends, 2004 sensitivities, summary and outlook, operating information by segment for the 4. quarter and full year 2003: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refinery throughput by region, refined product sales by region, chemicals), impact of allocating contribution of Cepsa to net operating income by business segment: equity in income (loss) and affiliates and other items, Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

Condition-Based Maintenance Strategy for Production Systems Generating Environmental Damage

Directory of Open Access Journals (Sweden)

L. Tlili

2015-01-01

Full Text Available We consider production systems which generate damage to environment as they get older and degrade. The system is submitted to inspections to assess the generated environmental damage. The inspections can be periodic or nonperiodic. In case an inspection reveals that the environmental degradation level has exceeded the critical level U, the system is considered in an advanced deterioration state and will have generated significant environmental damage. A corrective maintenance action is then performed to renew the system and clean the environment and a penalty has to be paid. In order to prevent such an undesirable situation, a lower threshold level L is considered to trigger a preventive maintenance action to bring back the system to a state as good as new at a lower cost and without paying the penalty. Two inspection policies are considered (periodic and nonperiodic. For each one of them, a mathematical model and a numerical procedure are developed to determine simultaneously the preventive maintenance (PM threshold L∗ and the inspection sequence which minimize the average long-run cost per time unit. Numerical calculations are performed to illustrate the proposed maintenance policies and highlight their main characteristics with respect to relevant input parameters.

Neutron generator based on adiabatic trap

International Nuclear Information System (INIS)

Golovin, I.N.; Zhil'tsov, V.A.; Panov, D.A.; Skovoroda, A.A.; Shatalov, G.E.; Shcherbakov, A.G.

1988-01-01

A possibility of 14 MeV neutron generator (NG) production on the basis of axial-symmetric adiabatic trap with MHD cusped armature for the testing of materials and elements of the DT reactor first wall and blanket structure is discussed. General requirements to NG are formulated. It is shown that the NG variant discussed meets the requirements formulated. Approximate calculation of the NG parameters has shown that total energy consumption by the generator does not exceed 220 MW at neutron flux specific capacity of 2.5 MW/m 2 and radiation test area of 5-6 m 2

Current status of production and supply of molybdenum-99 and 99Mo/99mTc generators in Indonesia

International Nuclear Information System (INIS)

Mutalib, A.

2003-01-01

Production of high-specific activity molybdenum-99 and 99 Mo/ 99m Tc Generators in Indonesia commenced when a new production facility supported by the presence of a 30 MW multipurpose reactor (RSG-GAS) was established in Serpong in 1990. This report describes the current production and supply of molybdenum-99m devoted mainly to fulfill the domestic demands in supplying 99 Mo/ 99m Tc Generators. Recent development on the use of LEU (Low Enriched Uranium) targets for replacing current HEU (High Enriched Uranium) targets in the production of 99 Mo will be reviewed briefly. (author)

DEVELOPMENT OF THE MODEL OF AN AUTOMATIC GENERATION OF TOTAL AMOUNTS OF COMMISSIONS IN INTERNATIONAL INTERBANK PAYMENTS

Directory of Open Access Journals (Sweden)

Dmitry N. Bolotov

2013-01-01

Full Text Available The article deals with the main form of international payment - bank transfer and features when it is charging by banks correspondent fees for transit funds in their correspondent accounts. In order to optimize the cost of expenses for international money transfers there is a need to develop models and toolkit of automatic generation of the total amount of commissions in international interbank settlements. Accordingly, based on graph theory, approach to the construction of the model was developed.

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Anders, John Kenneth; The ATLAS collaboration

2017-01-01

An overview of the most recent searches for third generation squark production is presented for a variety of stop/sbottom decays and mass hierarchy scenarios, using either 13.3fb"^{-1}" or 36.1fb"^{-1}" of Run 2 data.

DPLFW: a Framework for the Product-Line-Based Generation of Variable Content Documents

OpenAIRE

Gómez , Abel; Martí , Pau; Penadés , M. Carmen; Canós , José H.

2014-01-01

International audience; Document Product Lines (DPL) is a document engineering methodology that applies product-line engineering principles to the gen-eration of documents in high variability contexts and with high reuse of components. Instead of standalone documents, DPL promotes the defi-nition of families of documents where the members share some common content while differ in other parts. The key for the definition is the avail-ability of a collection of content assets which can be parame...

Omalizumab decreases IgE production in patients with allergic (IgE-mediated) asthma; PKPD analysis of a biomarker, total IgE

Science.gov (United States)

Lowe, Philip J; Renard, Didier

2011-01-01

AIM To determine whether excessive IgE production by patients with atopic allergic asthma decreases with omalizumab therapy. METHODS Omalizumab, free and total IgE data were obtained from an epidemiological study and six randomized, double-blind, placebo-controlled trials in patients with allergic asthma. The binding between omalizumab and IgE together with the production and elimination of IgE were modelled as previously, except that, in order to explain why total IgE was decreasing over a period of 5 years, the expression of IgE was allowed to change. RESULTS The prior constant IgE production model failed to converge on the data once long-term observations were included, whereas models allowing IgE production to decrease fitted. A feedback model indicated that, on average, IgE production decreased by 54% per year. This model was further developed with covariate searches indicating clinically small but statistically significant effects of age, gender, body mass index and race on some parameters. Model predictions were checked internally and externally against 3–5 year data from paediatric and adult atopic asthmatic patients and externally against extensive total IgE data from a long-duration (>1 year) phase 1 study which was not used in the model building. CONCLUSIONS A pharmacokinetic–pharmacodynamic model incorporating omalizumab–IgE binding and feedback for control of IgE production indicates that omalizumab reduces production of IgE. This raises the possibility that indefinite treatment may not be required, only for perhaps a few years. After the initial accumulation, total IgE should provide a means to monitor IgE production and guide individual treatment decisions. PMID:21392073

Effect of total solids content on methane and volatile fatty acid production in anaerobic digestion of food waste.

Science.gov (United States)

Liotta, Flavia; d'Antonio, Giuseppe; Esposito, Giovanni; Fabbricino, Massimiliano; van Hullebusch, Eric D; Lens, Piet N L; Pirozzi, Francesco; Pontoni, Ludovico

2014-10-01

This work investigates the role of the moisture content on anaerobic digestion of food waste, as representative of rapidly biodegradable substrates, analysing the role of volatile fatty acid production on process kinetics. A range of total solids from 4.5% to 19.2% is considered in order to compare methane yields and kinetics of reactors operated under wet to dry conditions. The experimental results show a reduction of the specific final methane yield of 4.3% and 40.8% in semi-dry and dry conditions compared with wet conditions. A decreasing trend of the specific initial methane production rate is observed when increasing the total solids concentration. Because of lack of water, volatile fatty acids accumulation occurs during the first step of the process at semi-dry and dry conditions, which is considered to be responsible for the reduction of process kinetic rates. The total volatile fatty acids concentration and speciation are proposed as indicators of process development at different total solids content. © The Author(s) 2014.

Charging generators for waste management costs

International Nuclear Information System (INIS)

Berry, J.B.; Homan, F.J.

1988-01-01

The Department of Energy (DOE) has recognized the need for waste management that incorporates improved waste-handling techniques and more stringent regulatory requirements to prevent future liabilities such as Superfund sites. DOE-Oak Ridge Operations (DOE-ORO) has recognized that an effective waste management program focuses on control at the source and that the burden for responsible waste management can be placed on generators by charging for waste management costs. The principle of including the waste management costs in the total cost of the product, even when the product is research and development, is being implemented at Oak Ridge National Laboratory (ORNL). This paper summarizes a plan to charge waste generators, the administrative structure of the plan, a comparison between the rate structure and changes in waste disposal operations, and issues that have surfaced as the plan is implemented

Organizational Culture Influence On Total Productive Maintenance (TPM and Operational Performance Using RASCH Model Analysis

Directory of Open Access Journals (Sweden)

Mohd Norhasni Mohd Asaad

2014-02-01

Full Text Available Abstract. Market globalization, competitive product and services, high economic crises are the most critical factors that influence the success of the manufacturing companies in global market. Therefore it is critical to the manufacturing companies to be efficient in production and lean tool may used to achieve that.  The most frequently used is the Total Preventive Maintenance (TPM, even though there are many studies have been conducted in relation to the TPM but there is limited research in investigating the effects of the TPM on operational performance. However, the result of the studies was not consistent, where TPM practice may have positive and negative impact on operational performance. Among the reason is the culture of the organization that influenced the implementation of TPM and operational performance. Due to that this study attempts to investigate the influence of organizational culture on the TPM implementation and operational performance.  Rasch model is used in this study due to its ability in interpreting and analyzing the ability of respondents in performing the difficult items. The online questionnaires were distributed to 63 randomly selected automotive companies located at Northern Region of Malaysia.  Results of the study revealed that the organizational culture has influenced on the successful implementation of TPM and operational performance. Therefore by the implementation of TPM in outstanding organizational culture can improve operational performance.   Keyword: Total Preventive Maintenance (TPM, Lean manufacturing, Operational performance, Organizational culture, Rasch modeldoi:10.12695/ajtm.2013.6.2.2How to cite this article:Mohd Asaad, M.N and Yusoff, R.Z. (2013. Organizational Culture Influence On Total Productive Maintenance (TPM and Operational Performance Using RASCH Model Analysis . The Asian Journal of Technology Management 6 (2: 72-81. Print ISSN: 1978-6956; Online ISSN: 2089-791X.  doi:10.12695/ajtm

Effects of aspirin on distortion product fine structure: interpreted by the two-source model for distortion product otoacoustic emissions generation.

Science.gov (United States)

Rao, Aparna; Long, Glenis R

2011-02-01

Distortion product otoacoustic emission (DPOAE) fine structure is due to the interaction of two major components coming from different places in the cochlea. One component is generated from the region of maximal overlap of the traveling waves generated by the two primaries and is attributed to nonlinear distortion (nonlinear component). The other component arises predominantly from the tonotopic region of the distortion product and is attributed to linear coherent reflection (reflection component). Aspirin (salicylate) ototoxicity can cause reversible hearing loss and reduces otoacoustic emission generation in the cochlea. The two components are expected to be affected differentially by cochlear health. Changes in DPOAE fine structure were recorded longitudinally in three subjects before, during, and after aspirin consumption. Full data sets were analyzed for two subjects, but only partial data could be analyzed from the third subject. Resulting changes in the two components of DPOAE fine structure revealed variability among subjects and differential effects on the two components. For low-intensity primaries, both components were reduced with the reflection component being more vulnerable. For high-intensity primaries, the nonlinear component showed little or no change, but the reflection component was always reduced.

Exploiting hidden symmetry in natural products: total syntheses of amphidinolides C and F.

Science.gov (United States)

Mahapatra, Subham; Carter, Rich G

2013-07-24

The total synthesis of amphidinolide C and a second-generation synthesis of amphidinolide F have been accomplished through the use of a common intermediate to access both the C1-C8 and the C18-C25 sections. The development of a Ag-catalyzed cyclization of a propargyl benzoate diol is described to access both trans-tetrahydrofuran rings. The evolution of a Felkin-controlled, 2-lithio-1,3-dienyl addition strategy to incorporate C9-C11 diene as well as C8 stereocenter is detailed. Key controlling aspects in the sulfone alkylation/oxidative desulfurization to join the major subunits, including the exploration of the optimum masking group for the C18 carbonyl motif, are discussed. A Trost asymmetric alkynylation and a stereoselective cuprate addition to an alkynoate have been developed for the rapid construction of the C26-C34 subunit. A Tamura/Vedejs olefination to introduce the C26 side arm of amphidnolides C and F is employed. The late-stage incorporation of the C15, C18 diketone motif proved critical to the successful competition of the total syntheses.

Analysis of an Improved Solar-Powered Hydrogen Generation System for Sustained Renewable Energy Production

Science.gov (United States)

2017-12-01

hydrogen gas by electrolysis. In LT Aviles’ design , distilled water was collected from the ambient air using Peltier dehumidifiers, manufactured by...Figure 13 shows the shelfing along with the entire system. Figure 13. Reconfigured Hydrogen Production Facility Because the system was designed for...POWERED HYDROGEN GENERATION SYSTEM FOR SUSTAINED RENEWABLE ENERGY PRODUCTION by Sen Feng Yu December 2017 Thesis Advisor: Garth V. Hobson Co

Product Plan of New Generation System Camera "OLYMPUS PEN E-P1"

Science.gov (United States)

Ogawa, Haruo

"OLYMPUS PEN E-P1", which is new generation system camera, is the first product of Olympus which is new standard "Micro Four-thirds System" for high-resolution mirror-less cameras. It continues good sales by the concept of "small and stylish design, easy operation and SLR image quality" since release on July 3, 2009. On the other hand, the half-size film camera "OLYMPUS PEN" was popular by the concept "small and stylish design and original mechanism" since the first product in 1959 and recorded sale number more than 17 million with 17 models. By the 50th anniversary topic and emotional value of the Olympus pen, Olympus pen E-P1 became big sales. I would like to explain the way of thinking of the product plan that included not only the simple functional value but also emotional value on planning the first product of "Micro Four-thirds System".

Influence of oil pollution to the total biological productivity of the Caspian sea

International Nuclear Information System (INIS)

Salmanov, M.A.

2005-01-01

Full text : As a result of a numerous researches it was defined that among all the species of pollutants polluting water reservoirs, oil and its components has a leading role. In this respect the Caspian Sea is in a special condition, as it exists as an isolated water reservoirs it had a direct relation with oil and oil products earlier than others and more than the rest. For this reason the oil in the Caspian Sea in its turn has become a permanent substrate. The main reservoirs of contamination of environmental medium of the Caspian Sea by oil and oil products are oil industries, oil pipelines, oil processing ventures, oil transportation, oil-gas service and oil drilling. At the same time oil components due to dried lands appear in the sea by river floods that are a heavy showers. Oil is a complex environmental compound of carbohydrogenes and distributed in environmental medium. Its characteristic that no other pollutant as dangerous it hasn't been and cannot be compared with oil according to the range of distribution, amount of pollutant resources and range of pressure to all the compounds of environmental medium. During the involvement of oil in the hydrosphere deep, often inattentive changes of its chemical, physiological and microbiological features and even reconstruction of all the hydrospheric profile take place. Being dynamic and mobile it penetrates toxic metals increasing their emigrational ability, subsides to the bottom and oppresses benthofauna. At the same time oil products in water reservoirs in common negatively influence to the balance of oxygen and position of biocenoses in the surface layers of sea water. In the given information the results of many years and monitoring character of researches about the influence of pollution in the base of total biological productivity of the Caspian Sea are presented (as well as oil pollution). It was defined that in the basins of the North (Makachkala - from Berbash, Bautina, Shevchenko fleet), Middle (Sand

Projections of NH3 emissions from manure generated by livestock production in China to 2030 under six mitigation scenarios.

Science.gov (United States)

Xu, Peng; Koloutsou-Vakakis, Sotiria; Rood, Mark J; Luan, Shengji

2017-12-31

China's rapid urbanization, large population, and increasing consumption of calorie-and meat-intensive diets, have resulted in China becoming the world's largest source of ammonia (NH 3 ) emissions from livestock production. This is the first study to use provincial, condition-specific emission factors based on most recently available studies on Chinese manure management and environmental conditions. The estimated NH 3 emission temporal trends and spatial patterns are interpreted in relation to government policies affecting livestock production. Scenario analysis is used to project emissions and estimate mitigation potential of NH 3 emissions, to year 2030. We produce a 1km×1km gridded NH 3 emission inventory for 2008 based on county-level activity data, which can help identify locations of highest NH 3 emissions. The total NH 3 emissions from manure generated by livestock production in 2008 were 7.3TgNH 3 ·yr -1 (interquartile range from 6.1 to 8.6TgNH 3 ·yr -1 ), and the major sources were poultry (29.9%), pigs (28.4%), other cattle (27.9%), and dairy cattle (7.0%), while sheep and goats (3.6%), donkeys (1.3%), horses (1.2%), and mules (0.7%) had smaller contributions. From 1978 to 2008, annual NH 3 emissions fluctuated with two peaks (1996 and 2006), and total emissions increased from 2.2 to 7.3Tg·yr -1 increasing on average 4.4%·yr -1 . Under a business-as-usual (BAU) scenario, NH 3 emissions in 2030 are expected to be 13.9TgNH 3 ·yr -1 (11.5-16.3TgNH 3 ·yr -1 ). Under mitigation scenarios, the projected emissions could be reduced by 18.9-37.3% compared to 2030 BAU emissions. This study improves our understanding of NH 3 emissions from livestock production, which is needed to guide stakeholders and policymakers to make well informed mitigation decisions for NH 3 emissions from livestock production at the country and regional levels. Copyright © 2017 Elsevier B.V. All rights reserved.

Estimation of the heat generation in vitrified waste product and shield thickness of the cask for the transportation of vitrified waste product using Monte Carlo technique

International Nuclear Information System (INIS)

Deepa, A.K.; Jakhete, A.P.; Mehta, D.; Kaushik, C.P.

2011-01-01

High Level Liquid waste (HLW) generated during reprocessing of spent fuel contains most of the radioactivity present in the spent fuel resulting in the need for isolation and surveillance for extended period of time. Major components in HLW are the corrosion products, fission products such as 137 Cs, 90 Sr, 106 Ru, 144 Ce, 125 Sb etc, actinides and various chemicals used during reprocessing of spent fuel. Fresh HLW having an activity concentration of around 100Ci/l is to be vitrified into borosilicate glass and packed in canisters which are placed in S.S overpacks for better confinement. These overpacks contain around 0.7 Million Curies of activity. Characterisation of activity in HLW and activity profile of radionuclides for various cooling periods sets the base for the study. For transporting the vitrified waste product (VWP), two most important parameters is the shield thickness of the transportation cask and the heat generation in the waste product. This paper describes the methodology used in the estimation of lead thickness for the transportation cask using the Monte Carlo Technique. Heat generation due to decay of fission products results in the increase in temperature of the vitrified waste product during interim storage and disposal. Glass being the material, not having very high thermal conductivity, temperature difference between the canister and surrounding bears significance in view of the possibility of temperature based devitrification of VWP. The heat generation in the canister and the overpack containing vitrified glass is also estimated using MCNP. (author)

A system for accurate on-line measurement of total gas consumption or production rates in microbioreactors

NARCIS (Netherlands)

van Leeuwen, Michiel; Heijnen, Joseph J.; Gardeniers, Johannes G.E.; Oudshoorn, Arthur; Noorman, Henk; Visser, Jan; van der Wielen, Luuk A.M.; van Gulik, Walter M.

2009-01-01

A system has been developed, based on pressure controlled gas pumping, for accurate measurement of total gas consumption or production rates in the nmol/min range, applicable for on-line monitoring of bioconversions in microbioreactors. The system was validated by carrying out a bioconversion with

Some nuclear chemical aspects of medical generator nuclide production at the Los Alamos hot cell facility

CERN Document Server

Fassbender, M; Heaton, R C; Jamriska, D J; Kitten, J J; Nortier, F M; Peterson, E J; Phillips, D R; Pitt, L R; Salazar, L L; Valdez, F O; 10.1524/ract.92.4.237.35596

2004-01-01

Generator nuclides constitute a convenient tool for applications in nuclear medicine. In this paper, some radiochemical aspects of generator nuclide parents regularly processed at Los Alamos are introduced. The bulk production of the parent nuclides /sup 68/Ge, /sup 82/Sr, /sup 109/Cd and /sup 88/Zr using charged particle beams is discussed. Production nuclear reactions for these radioisotopes, and chemical separation procedures are presented. Experimental processing yields correspond to 80%-98% of the theoretical thick target yield. Reaction cross sections are modeled using the code ALICE-IPPE; it is observed that the model largely disagrees with experimental values for the nuclear processes treated. Radionuclide production batches are prepared 1-6 times yearly for sales. Batch activities range from 40MBq to 75 GBq.

Some nuclear chemical aspects of medical generator nuclide production at the Los Alamos hot cell facility

International Nuclear Information System (INIS)

Fassbender, M.; Nortier, F.M.; Phillips, D.R.; Hamilton, V.T.; Heaton, R.C.; Jamriska, D.J.; Kitten, J.J.; Pitt, L.R.; Salazar, L.L.; Valdez, F.O.; Peterson, E.J.

2004-01-01

Generator nuclides constitute a convenient tool for applications in nuclear medicine. In this paper, some radiochemical aspects of generator nuclide parents regularly processed at Los Alamos are introduced. The bulk production of the parent nuclides 68 Ge, 82 Sr, 109 Cd and 88 Zr using charged particle beams is discussed. Production nuclear reactions for these radioisotopes, and chemical separation procedures are presented. Experimental processing yields correspond to 80%-98% of the theoretical thick target yield. Reaction cross sections are modeled using the code ALICE-IPPE; it is observed that the model largely disagrees with experimental values for the nuclear processes treated. Radionuclide production batches are prepared 1-6 times yearly for sales. Batch activities range from 40 MBq to 75 GBq. (orig.)

STEAM GENERATOR TUBE INTEGRITY ANALYSIS OF A TOTAL LOSS OF ALL HEAT SINKS ACCIDENT FOR WOLSONG NPP UNIT 1

Directory of Open Access Journals (Sweden)

HEOK-SOON LIM

2014-02-01

Full Text Available A total loss of all heat sinks is considered a severe accident with a low probability of occurrence. Following a total loss of all heat sinks, the degasser/condenser relief valves (DCRV become the sole means available for the depressurization of the primary heat transport system. If a nuclear power plant has a total loss of heat sinks accident, high-temperature steam and differential pressure between the primary heat transport system (PHTS and the steam generator (SG secondary side can cause a SG tube creep rupture. To protect the PHTS during a total loss of all heat sinks accident, a sufficient depressurization capability of the degasser/condenser relief valve and the SG tube integrity is very important. Therefore, an accurate estimation of the discharge through these valves is necessary to assess the impact of the PHTS overprotection and the SG tube integrity of the primary circuit. This paper describes the analysis of DCRV discharge capacity and the SG tube integrity under a total loss of all heat sink using the CATHENA code. It was found that the DCRV's discharge capacity is enough to protect the overpressure in the PHTS, and the SG tube integrity is maintained in a total loss of all heat accident.

Steam Generator Tube Integrity Analysis of A Total Loss of all Heat Sinks Accident for Wolsong NPP Unit 1

Energy Technology Data Exchange (ETDEWEB)

Lim, Heoksoon; Song, Taeyoung; Chi, Moongoo [Korea Htydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of); Kim, Seoungrae [Nuclear Engineering Service and Solution, Daejeon (Korea, Republic of)

2014-02-15

A total loss of all heat sinks is considered a severe accident with a low probability of occurrence. Following a total loss of all heat sinks, the degasser/condenser relief valves (DCRV) become the sole means available for the depressurization of the primary heat transport system. If a nuclear power plant has a total loss of heat sinks accident, high-temperature steam and differential pressure between the primary heat transport system (PHTS) and the steam generator (SG) secondary side can cause a SG tube creep rupture. To protect the PHTS during a total loss of all heat sinks accident, a sufficient depressurization capability of the degasser/condenser relief valve and the SG tube integrity is very important. Therefore, an accurate estimation of the discharge through these valves is necessary to assess the impact of the PHTS overprotection and the SG tube integrity of the primary circuit. This paper describes the analysis of DCRV discharge capacity and the SG tube integrity under a total loss of all heat sink using the CATHENA code. It was found that the DCRV's discharge capacity is enough to protect the overpressure in the PHTS, and the SG tube integrity is maintained in a total loss of all heat accident.

Steam Generator Tube Integrity Analysis of A Total Loss of all Heat Sinks Accident for Wolsong NPP Unit 1

International Nuclear Information System (INIS)

Lim, Heoksoon; Song, Taeyoung; Chi, Moongoo; Kim, Seoungrae

2014-01-01

A total loss of all heat sinks is considered a severe accident with a low probability of occurrence. Following a total loss of all heat sinks, the degasser/condenser relief valves (DCRV) become the sole means available for the depressurization of the primary heat transport system. If a nuclear power plant has a total loss of heat sinks accident, high-temperature steam and differential pressure between the primary heat transport system (PHTS) and the steam generator (SG) secondary side can cause a SG tube creep rupture. To protect the PHTS during a total loss of all heat sinks accident, a sufficient depressurization capability of the degasser/condenser relief valve and the SG tube integrity is very important. Therefore, an accurate estimation of the discharge through these valves is necessary to assess the impact of the PHTS overprotection and the SG tube integrity of the primary circuit. This paper describes the analysis of DCRV discharge capacity and the SG tube integrity under a total loss of all heat sink using the CATHENA code. It was found that the DCRV's discharge capacity is enough to protect the overpressure in the PHTS, and the SG tube integrity is maintained in a total loss of all heat accident

An Assessment of Three Northeast Asian Economies’ Total Factor Productivity

Directory of Open Access Journals (Sweden)

Dana GÂRDU

2011-07-01

Full Text Available East Asian economies have achieved spectacular growth rates in a relatively short timespan outstripping the rest of the developing world. Hence the concern of both scholarly and policymaking circles for their peculiar development strategies. Both their spectacular rise and provisional decline after the Asian financial crisis (AFC were explained from three major perspectives: statism, neoliberalism, and neoconfucianism.The paper purports to quantify and interpret the pre-crisis total factor productivity (TFP of three Northeast Asian economies by using the Solow Model. The interdependencies between their TFP dynamics were investigated via a VAR Model. The findings suggest that labour contribution has decreased over time in favour of capital inputs and/or TFP as speedy industrialisation, and a gradual refinement of international specialisation proceeded. However low or even negative TFP during the 1990s signal the emergence of structural problems that decelerate growth, and increase these economies’ vulnerability to exogenous shocks.

Criterion 6, indicator 28 : total and per capita consumption of wood and wood products in round wood equivalents

Science.gov (United States)

James L. Howard; Rebecca Westby; Kenneth E. Skog

2010-01-01

Total consumption of wood and paper products and fuelwood, in roundwood equivalents, increased between 1965 and 1988 from 13.2 to 18.9 billion cubic feet. Since 1988, it has been about 20 billion cubic feet per year. Total per capita consumption increased between 1965 and 1987, from 68 to 83 ft3 per year. Since 1987 through 2006, per capita...

Next-Generation Aura/OMI NO2 and SO2 Products

Science.gov (United States)

Krotkov, Nickolay; Yang, Kai; Bucsela, Eric; Lamsal, Lok; Celarier, Edward; Swartz, William; Carn, Simon; Bhartia, Pawan; Gleason, James; Pickering, Ken;

Long-term influence of alternative forest management treatments on total ecosystem and wood product carbon storage

Science.gov (United States)

Joshua J. Puhlick; Aaron R. Weiskittel; Ivan J. Fernandez; Shawn Fraver; Laura S. Kenefic; Robert S. Seymour; Randall K. Kolka; Lindsey E. Rustad; John C. Brissette

2016-01-01

Developing strategies for reducing atmospheric CO2 is one of the foremost challenges facing natural resource professionals today. The goal of this study was to evaluate total ecosystem and harvested wood product carbon (C) stocks among alternative forest management treatments (selection cutting, shelterwood cutting, commercial clearcutting, and...

Economic evaluation of technology for a new generation biofuel production using wastes.

Science.gov (United States)

Koutinas, Athanasios; Kanellaki, Maria; Bekatorou, Argyro; Kandylis, Panagiotis; Pissaridi, Katerina; Dima, Agapi; Boura, Konstantina; Lappa, Katerina; Tsafrakidou, Panagiota; Stergiou, Panagiota-Yiolanda; Foukis, Athanasios; Gkini, Olga A; Papamichael, Emmanuel M

2016-01-01

An economic evaluation of an integrated technology for industrial scale new generation biofuel production using whey, vinasse, and lignocellulosic biomass as raw materials is reported. Anaerobic packed-bed bioreactors were used for organic acids production using initially synthetic media and then wastes. Butyric, lactic and acetic acid were predominately produced from vinasse, whey, and cellulose, respectively. Mass balance was calculated for a 16,000L daily production capacity. Liquid-liquid extraction was applied for recovery of the organic acids using butanol-1 as an effective extraction solvent which serves also as the alcohol for the subsequent enzyme-catalyzed esterification. The investment needed for the installation of the factory was estimated to about 1.7million€ with depreciation excepted at about 3months. For cellulosics, the installation investment was estimated to be about 7-fold higher with depreciation at about 1.5years. The proposed technology is an alternative trend in biofuel production. Copyright © 2015. Published by Elsevier Ltd.

Exact and Heuristic Solutions to Minimize Total Waiting Time in the Blood Products Distribution Problem

Directory of Open Access Journals (Sweden)

Amir Salehipour

2012-01-01

Full Text Available This paper presents a novel application of operations research to support decision making in blood distribution management. The rapid and dynamic increasing demand, criticality of the product, storage, handling, and distribution requirements, and the different geographical locations of hospitals and medical centers have made blood distribution a complex and important problem. In this study, a real blood distribution problem containing 24 hospitals was tackled by the authors, and an exact approach was presented. The objective of the problem is to distribute blood and its products among hospitals and medical centers such that the total waiting time of those requiring the product is minimized. Following the exact solution, a hybrid heuristic algorithm is proposed. Computational experiments showed the optimal solutions could be obtained for medium size instances, while for larger instances the proposed hybrid heuristic is very competitive.

New capabilities for Monte Carlo simulation of deuteron transport and secondary products generation

International Nuclear Information System (INIS)

Sauvan, P.; Sanz, J.; Ogando, F.

2010-01-01

Several important research programs are dedicated to the development of facilities based on deuteron accelerators. In designing these facilities, the definition of a validated computational approach able to simulate deuteron transport and evaluate deuteron interactions and production of secondary particles with acceptable precision is a very important issue. Current Monte Carlo codes, such as MCNPX or PHITS, when applied for deuteron transport calculations use built-in semi-analytical models to describe deuteron interactions. These models are found unreliable in predicting neutron and photon generated by low energy deuterons, typically present in those facilities. We present a new computational tool, resulting from an extension of the MCNPX code, which improve significantly the treatment of problems where any secondary product (neutrons, photons, tritons, etc.) generated by low energy deuterons reactions could play a major role. Firstly, it handles deuteron evaluated data libraries, which allow describing better low deuteron energy interactions. Secondly, it includes a reduction variance technique for production of secondary particles by charged particle-induced nuclear interactions, which allow reducing drastically the computing time needed in transport and nuclear response calculations. Verification of the computational tool is successfully achieved. This tool can be very helpful in addressing design issues such as selection of the dedicated neutron production target and accelerator radioprotection analysis. It can be also helpful to test the deuteron cross-sections under development in the frame of different international nuclear data programs.

GHG emissions from primary aluminum production in China: Regional disparity and policy implications

International Nuclear Information System (INIS)

Hao, Han; Geng, Yong; Hang, Wen

2016-01-01

Highlights: • GHG emissions from primary aluminum production in China were accounted. • The impact of regional disparity of power generation was considered for this study. • GHG emissions factor of China’s primary aluminum production was 16.5 t CO_2e/t Al ingot in 2013. • Total GHG emissions from China’s primary aluminum production were 421 mt CO_2e in 2013. - Abstract: China is the world-leading primary aluminum production country, which contributed to over half of global production in 2014. Primary aluminum production is power-intensive, for which power generation has substantial impact on overall Greenhouse Gas (GHG) emissions. In this study, we explore the impact of regional disparity of China’s power generation system on GHG emissions for the sector of primary aluminum production. Our analysis reveals that the national GHG emissions factor (GEF) of China’s primary aluminum production was 16.5 t CO_2e/t Al ingot in 2013, with province-level GEFs ranging from 8.2 to 21.7 t CO_2e/t Al ingot. There is a high coincidence of provinces with high aluminum productions and high GEFs. Total GHG emissions from China’s primary aluminum production were 421 mt CO_2e in 2013, approximately accounting for 4% of China’s total GHG emissions. Under the 2020 scenario, GEF shows a 13.2% reduction compared to the 2013 level, but total GHG emissions will increase to 551 mt CO_2e. Based on our analysis, we recommend that the government should further promote energy efficiency improvement, facilitate aluminum industry redistribution with low-carbon consideration, promote secondary aluminum production, and improve aluminum industry data reporting and disclosure.

Hydrogen production by the iodine-sulphur thermochemical cycle. Total and partial pressure measurements

International Nuclear Information System (INIS)

D Doizi; V Dauvois; J L Roujou; V Delanne; P Fauvet; B Larousse; O Hercher; P Carles; C Moulin

2006-01-01

The iodine sulphur thermochemical cycle appears to be one of the most promising candidate for the massive production of hydrogen using nuclear energy. The key step in this cycle is the HI distillation section which must be optimized to get a good efficiency of the overall cycle. The concept of reactive versus extractive distillation of HI has been proposed because of its potentiality. The design and the optimization of the reactive distillation column requires the knowledge of the liquid vapour equilibrium over the ternary HI-I 2 -H 2 O mixtures up to 300 C and 100 bars. A general methodology based on three experimental devices imposed by the very corrosive and concentrated media will be described: 1) I1 for the total pressure measurement versus different ternary compositions. 2) I2 for the partial and total pressure measurements around 130 C and 2 bars to validate the choice of the analytical optical 'online' techniques we have proposed. 3) I3 for the partial and total pressures measurements in the process domain. The results obtained on pure samples, binary mixtures HI-H 2 O and ternary mixtures using an experimental design analysis in the experimental device I2 will be discussed. (authors)

Third generation design solar cell module LSA task 5, large scale production

Science.gov (United States)

1980-01-01

A total of twelve (12) preproduction modules were constructed, tested, and delivered. A concept to the frame assembly was designed and proven to be quite reliable. This frame design, as well as the rest of the assembly, was designed with future high volume production and the use of automated equipment in mind.

Curing Ingredients, Characteristics, Total Phenolic, and Antioxidant Activity of Commercial Indonesian Dried Meat Product (Dendeng

Directory of Open Access Journals (Sweden)

T. Suryati

2012-08-01

Full Text Available Dendeng is Indonesian dried meat product that used spices rich in antioxidant component as ingredient. In addition, commercial dendeng usually use saltpeter (nitrate/nitrite salt as curing ingredient to inhibit rancidity and to produce stable red color. The aims of this study were to investigate composition of spices and saltpeter added, characteristic, total phenolic, and antioxidant activity of commercial dendeng. This research was conducted through interview with some dendeng producers to get information about saltpeter adding and spices composition used in their products. Then the interview results were verified by laboratory analysis. The results showed that spices and saltpeter adding from some producers varied. The saltpeter added in curing process produced inconsistent red color on commercial dendeng in this investigation. Total phenolic of dendeng from producers ranged from 42.47 to 102.0 mg GAE/100 g DM for raw dendeng, and 36.51 to 95.49 mg GAE/100 g DM for fried dendeng. Antioxidant capacity against DPPH ranged from 79.35 to 379.40 mg VCE/100 g DM for raw dendeng, and 94.30 to 559.40 mg VCE/100 g DM for fried dendeng. Antioxidant capacity of raw dendeng was influenced by phenolic content about 87.2%, but in fried dendeng was only 59.0%. In conclusion, dendeng has a significant antioxidant activity, even after frying, and saltpeter addition was not effective to maintain stable red color in dendeng products.

Three generation production biotechnology of biomass into bio-fuel

Science.gov (United States)

Zheng, Chaocheng

2017-08-01

The great change of climate change, depletion of natural resources, and scarcity of fossil fuel in the whole world nowadays have witnessed a sense of urgency home and abroad among scales of researchers, development practitioners, and industrialists to search for completely brand new sustainable solutions in the area of biomass transforming into bio-fuels attributing to our duty-that is, it is our responsibility to take up this challenge to secure our energy in the near future with the help of sustainable approaches and technological advancements to produce greener fuel from nature organic sources or biomass which comes generally from organic natural matters such as trees, woods, manure, sewage sludge, grass cuttings, and timber waste with a source of huge green energy called bio-fuel. Biomass includes most of the biological materials, livings or dead bodies. This energy source is ripely used industrially, or domestically for rather many years, but the recent trend is on the production of green fuel with different advance processing systems in a greener. More sustainable method. Biomass is becoming a booming industry currently on account of its cheaper cost and abundant resources all around, making it fairly more effective for the sustainable use of the bio-energy. In the past few years, the world has witnessed a remarkable development in the bio-fuel production technology, and three generations of bio-fuel have already existed in our society. The combination of membrane technology with the existing process line can play a vital role for the production of green fuel in a sustainable manner. In this paper, the science and technology for sustainable bio-fuel production will be introduced in detail for a cleaner world.

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Mitrevski, Jovan; The ATLAS collaboration

2018-01-01

Naturalness arguments for weak-scale supersymmetry favour supersymmetric partners of the third generation quarks with masses not too far from those of their Standard Model counterparts. Top or bottom squarks with masses less than or around one TeV can also give rise to direct pair production rates at the LHC that can be observed in the data sample recorded by the ATLAS detector. The talk presents recent ATLAS results from searches for direct stop and sbottom pair production, using the data collected during the LHC Run 2.

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Mitrevski, Jovan; The ATLAS collaboration

2018-01-01

Naturalness arguments for weak-scale supersymmetry favour supersymmetric partners of the third generation quarks with masses not too far from those of their Standard Model counterparts. Top or bottom squarks with masses less than or around one TeV can also give rise to direct pair production rates at the LHC that can be observed in the data sample recorded by the ATLAS detector. The paper presents recent ATLAS results from searches for direct stop and sbottom pair production, using the data collected during the LHC Run 2.

Global Navigation Satellite System (GNSS) Final Clock Product (5 minute resolution, daily files, generated weekly) from NASA CDDIS

Data.gov (United States)

National Aeronautics and Space Administration — This derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (5-minute granularity, daily files, generated...

A small capacity co generative gas-turbine plant in factory AD 'Komuna' - Skopje (Macedonia)

International Nuclear Information System (INIS)

Dimitrov, Konstantin; Armenski, Slave; Tashevski, Done

2000-01-01

The factory AD 'Komuna' -Skopje (Macedonia), has two steam block boilers, type ST 800 for steam production for process and space heating. The factory satisfies the electricity needs from the national grid. By the use of natural gas like fuel it is possible to produce electrical energy in its own co generative gas turbine plant. In this article, a co generative plant with small-scale gas turbine for electricity production is analyzed . The gas from gas turbine have been introduce in the steam block boiler. Also, a natural gas consumption, the electricity production, total investment and payback period of investment are determined. (Authors)

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Meloni, Federico; The ATLAS collaboration

2018-01-01

This document summarises recent ATLAS results for searches for third generation squarks using 36.1 fb$^{-1}$ of LHC proton-proton collision data collected at $\\sqrt{s}=13$ TeV. Despite the absence of experimental evidence, weak scale supersymmetry remains one of the best motivated and studied Standard Model extensions. Supersymmetry can naturally solve the Standard Model hierarchy problem by preventing a large fine-tuning in the Higgs sector: a typical natural SUSY spectrum contains light third generation squarks (stops and sbottoms). Both R-Parity conserving and R-Parity violating scenarios are considered. The searches involve final states including jets, missing transverse momentum, electrons or muons. Simplified models predicting pair production of third generation squarks have been excluded at 95% CL up to about one TeV in the most favourable scenarios.

Total Factor Productivity and Energy Intensity in Indian Manufacturing: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Santosh Kumar Sahu

2011-01-01

Full Text Available The objective of the paper is to estimate the transcendental logarithmic production function and further study the determinants of total factor productivity (TFP of Indian manufacturing industries. The estimation of TFP is based on four inputs model, where apart from labour and capital, material and energy are the other two inputs. The findings of the paper suggest that labour and material inputs play major role as compared to the capital and energy input. Age of the firm, ownership, energy intensity, embodied and disembodied technology imports, research and development and exports were considered as the possible determinants of the TFP in the second stage regression. The finding of the estimates suggest that age of the firm, export intensity and disembodied technology import are positively related to the TFP, where ownership, energy intensity, embodied technology import and R&D intensity are negatively related to the TFP of the firms for Indian manufacturing.

Next Generation Hydrogen Station Composite Data Products: Retail Stations, Data through Quarter 4 of 2016

Energy Technology Data Exchange (ETDEWEB)

Sprik, Sam [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Chris [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Peters, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-05-31

This publication includes 86 composite data products (CDPs) produced for next generation hydrogen stations, with data through the fourth quarter of 2016. These CDPs include data from retail stations only.

Next Generation Hydrogen Station Composite Data Products: Retail Stations, Data through Quarter 2 of 2017

Energy Technology Data Exchange (ETDEWEB)

Sprik, Samuel [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Jennifer M [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Christopher D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Peters, Michael C. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-12-05

This publication includes 92 composite data products (CDPs) produced for next generation hydrogen stations, with data through the second quarter of 2017. These CDPs include data from retail stations only.

A Preliminary Examination of the Second Generation CMORPH Real-time Production

Science.gov (United States)

Joyce, R.; Xie, P.; Wu, S.

2017-12-01

The second generation CMORPH (CMORPH2) has started test real-time production of 30-minute precipitation estimates on a 0.05olat/lon grid over the entire globe, from pole-to-pole. The CMORPH2 is built upon the Kalman Filter based CMORPH algorithm of Joyce and Xie (2011). Inputs to the system include rainfall and snowfall rate retrievals from passive microwave (PMW) measurements aboard all available low earth orbit (LEO) satellites, precipitation estimates derived from infrared (IR) observations of geostationary (GEO) and LEO platforms, and precipitation simulations from the NCEP operational global forecast system (GFS). Inputs from the various sources are first inter-calibrated to ensure quantitative consistencies in representing precipitation events of different intensities through PDF calibration against a common reference standard. The inter-calibrated PMW retrievals and IR-based precipitation estimates are then propagated from their respective observation times to the target analysis time along the motion vectors of the precipitating clouds. Motion vectors are first derived separately from the satellite IR based precipitation estimates and the GFS precipitation fields. These individually derived motion vectors are then combined through a 2D-VAR technique to form an analyzed field of cloud motion vectors over the entire globe. The propagated PMW and IR based precipitation estimates are finally integrated into a single field of global precipitation through the Kalman Filter framework. A set of procedures have been established to examine the performance of the CMORPH2 real-time production. CMORPH2 satellite precipitation estimates are compared against the CPC daily gauge analysis, Stage IV radar precipitation over the CONUS, and numerical model forecasts to discover potential shortcomings and quantify improvements against the first generation CMORPH. Special attention has been focused on the CMORPH behavior over high-latitude areas beyond the coverage of the first

Total integrated energy system (TIES) feasibility analysis for the downtown redevelopment project, Pasadena, California

Energy Technology Data Exchange (ETDEWEB)

None

1977-04-01

The purpose of this study is to determine the most desirable method of serving the energy needs of a commercial development to be constructed in Pasadena, California. The factors that determine maximum desirability consist of the following: (1) maximum economic benefit to the energy user and to the surrounding community; (2) minimum usage of energy by both the energy user and the surrounding community; and (3) minimum introduction of pollutants into the community. The methods studied were the Total Integrated Energy System (TIES) concept in several configurations. The TIES concept differs from the ''total energy concept'' in the respect that the electric power output of the local power generation plant goes into the utility company distribution grid, rather than to the user. The user is served power from the grid, as with a conventional system, but also receives heating and cooling media produced from power generation by-product heat from the TIES plant. The effect of this concept is that a very large source-sink for electric energy is provided by the utility company grid. This, in turn, permits the plant to operate in response to instantaneous thermal demand, rather than instantaneous power demand. No auxiliary firing is ever required. No waste of unneeded by-product energy to atmosphere ever occurs. Balance is achieved by either delivering excess power into the grid or by withdrawing power production deficiency from the grid. Near-optimum efficiency is achieved during all operating conditions. There is no need whatsoever for the power-generating plant to be sized to meet the power demand, since it seldom, if ever, tracks the power demand. Sizing of the electric generation is solely a function of economics and the demand for waste heat.

ESOL facility for the generation and radiochemical separation of short half-life fission products

International Nuclear Information System (INIS)

Gehrke, R.J.; Meikrantz, D.H.; Baker, J.D.; Anderl, R.A.; Novick, V.J.; Greenwood, R.C.

1988-01-01

A facility has been developed at the Idaho National Engineering Laboratory (INEL) for the generation and rapid radiochemical separation of short half-life mixed fission products. This facility, referred to as the Idaho Elemental Separation On Line (ESOL), consists of electro-plated sources of spontaneously fissioning 252 Cf with a helium jet transport arrangement to continuously deliver short half-life, mixed fission products to the radiochemistry laboratory for rapid, computer controlled, radiochemical separations. 18 refs., 13 figs

Distributed generation induction and permanent magnet generators

CERN Document Server

Lai, L

2007-01-01

Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generators (IGs) are the cheapest and most commonly used technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples o better demonstrate how the integration of energy sources can be accomplished. The book also provides the ...

Hybrid Test Bed of Wind Electric Generator with Photovoltaic Panels

OpenAIRE

G.D.Anbarasi Jebaselvi; S.Paramasivam

2014-01-01

Driven by the increasing costs of power production and decreasing fossil fuel reserves with the addition of global environmental concerns, renewable energy is now becoming significant fraction of total electricity production in the world. Advancements in the field of wind electric generator technology and power electronics help to achieve rapid progress in hybrid power system which mainly involves wind, solar and diesel energy with a good battery back-up. Here the discussion brings about the ...

A Covariance Generation Methodology for Fission Product Yields

Directory of Open Access Journals (Sweden)

Terranova N.

2016-01-01

Full Text Available Recent safety and economical concerns for modern nuclear reactor applications have fed an outstanding interest in basic nuclear data evaluation improvement and completion. It has been immediately clear that the accuracy of our predictive simulation models was strongly affected by our knowledge on input data. Therefore strong efforts have been made to improve nuclear data and to generate complete and reliable uncertainty information able to yield proper uncertainty propagation on integral reactor parameters. Since in modern nuclear data banks (such as JEFF-3.1.1 and ENDF/BVII.1 no correlations for fission yields are given, in the present work we propose a covariance generation methodology for fission product yields. The main goal is to reproduce the existing European library and to add covariance information to allow proper uncertainty propagation in depletion and decay heat calculations. To do so, we adopted the Generalized Least Square Method (GLSM implemented in CONRAD (COde for Nuclear Reaction Analysis and Data assimilation, developed at CEA-Cadarache. Theoretical values employed in the Bayesian parameter adjustment are delivered thanks to a convolution of different models, representing several quantities in fission yield calculations: the Brosa fission modes for pre-neutron mass distribution, a simplified Gaussian model for prompt neutron emission probability, theWahl systematics for charge distribution and the Madland-England model for the isomeric ratio. Some results will be presented for the thermal fission of U-235, Pu-239 and Pu-241.

Multicurie, transportable, integrally shielded 123Xe → 123I generator and processing system for high-purity iodine-123 production

International Nuclear Information System (INIS)

Lagunas-Solar, M.C.; Thibeau, H.L.; Goodart, C.E.; Little, F.E.; Navarro, N.J.; Hartnett, D.E.

1985-01-01

An integrally shielded 123 Xe → 123 I generator system has been designed and tested under production conditions for its suitability as a multicurie handling device from which to produce radiopharmaceutical-quality high-purity no-carrier-added (NCA) 123 I. The 123 Xe → 123 I generator system is expected to provide an alternative to current techniques and to increase the availability and reliability of high-purity 123 I made via the 127 I(p,5n) 123 Xe → 123 I nuclear reaction. The generator system is based on the Crocker Nuclear Laboratory's continuous-flow production system which has been operating since 1974 for the multicurie production of 123 I. The generator system, which consists of an integrally shielded xenon trap and separate loading and processing apparatuses, is simple and reliable to operate, can be adapted to computerized control, and provides a safe working environment for the repeated handling of multicurie amounts of Xe-I radioactivities

Next-Generation Satellite Precipitation Products for Understanding Global and Regional Water Variability

Science.gov (United States)

Hou, Arthur Y.

2011-01-01

A major challenge in understanding the space-time variability of continental water fluxes is the lack of accurate precipitation estimates over complex terrains. While satellite precipitation observations can be used to complement ground-based data to obtain improved estimates, space-based and ground-based estimates come with their own sets of uncertainties, which must be understood and characterized. Quantitative estimation of uncertainties in these products also provides a necessary foundation for merging satellite and ground-based precipitation measurements within a rigorous statistical framework. Global Precipitation Measurement (GPM) is an international satellite mission that will provide next-generation global precipitation data products for research and applications. It consists of a constellation of microwave sensors provided by NASA, JAXA, CNES, ISRO, EUMETSAT, DOD, NOAA, NPP, and JPSS. At the heart of the mission is the GPM Core Observatory provided by NASA and JAXA to be launched in 2013. The GPM Core, which will carry the first space-borne dual-frequency radar and a state-of-the-art multi-frequency radiometer, is designed to set new reference standards for precipitation measurements from space, which can then be used to unify and refine precipitation retrievals from all constellation sensors. The next-generation constellation-based satellite precipitation estimates will be characterized by intercalibrated radiometric measurements and physical-based retrievals using a common observation-derived hydrometeor database. For pre-launch algorithm development and post-launch product evaluation, NASA supports an extensive ground validation (GV) program in cooperation with domestic and international partners to improve (1) physics of remote-sensing algorithms through a series of focused field campaigns, (2) characterization of uncertainties in satellite and ground-based precipitation products over selected GV testbeds, and (3) modeling of atmospheric processes and

Symptoms of mothers and infants related to total volatile organic compounds in household products.

Science.gov (United States)

Farrow, Alexandra; Taylor, Hazel; Northstone, Kate; Golding, Jean

2003-10-01

The authors sought to determine whether reported symptoms of mothers and infants were associated significantly with the use of household products that raised indoor levels of total volatile organic compounds (TVOCs). Data collected from 170 homes within the Avon Longitudinal Study of Parents and Children (ALSPAC: a large birth cohort of more than 10,000) had determined which household products were associated with the highest levels of TVOCs. The latter data were collected over a period that approximated 6 mo of pregnancy and the infants' first 6 mo of life. This paper presents (a) the mothers' self-reports of the use of these products in their homes and (b) self-reported medical symptoms of mothers and infants postnatally. Higher TVOC levels were associated with air freshener and aerosol use. Infant diarrhea and earache were statistically significantly associated with air freshener use, and diarrhea and vomiting were significantly associated with aerosol use. Headache experienced by mothers 8 mo after birth was significantly associated with the use of air fresheners and aerosols; maternal depression was significantly associated with the use of air fresheners. The results of the study suggest a link between the use of products that raise indoor levels of TVOCs and an increased risk of certain symptoms among infants and their mothers.

Charging generators for waste management costs

International Nuclear Information System (INIS)

Berry, J.B.; Homan, F.J.

1987-01-01

DOE-Oak Ridge Operations (DOE-ORO) has recognized that an effective waste management program focuses on control at the source and that the burden for responsible waste management can be placed on generators by charging for waste management costs. The principle of including the waste management costs in the total cost of the product, even when the product is research and development, is being implemented at Oak Ridge National Laboratory (ORNL). Charging waste management costs to the pollutor creates an incentive to optimize processes so that less waste is produced and provides a basis for determining the cost effectiveness. 2 refs., 1 fig., 1 tab

Generation, characterization and reuse of solid wastes from a biodiesel production plant.

Science.gov (United States)

Oliveira, Fernando Jorge Santos; Santana, Daniele Dos Santos; Costa, Simone Soraya Brito; Oliveira, Lenise Diniz; Liduino, Vitor Silva; Servulo, Eliana Flávia Camporese

2017-03-01

The aim of this study was to identify and characterize industrial solid wastes generated by a biodiesel production plant in Brazil, as well as to present strategies for the management of these materials. This plant produces every year around 100,000tons of biodiesel from vegetable oils and animal fats. The methodology of the study included technical visits, interviews with the operational and environmental management staff as well as analysis of documents, reports and computerized data systems. An approach to reduce the generation of hazardous waste was investigated. It was take into account the amount of raw material that was processed, reduction of landfill disposal, and the maximization of the their recycling and reuse. The study also identified the sources of waste generation and accordingly prepared an evaluation matrix to determine the types of waste with the higher potential for minimization. The most important residue of the process was the filter material impregnated with oil and biodiesel, requiring, therefore, measures for its minimization. The use of these residues in the production of ceramic artefacts (light bricks) was considered to be very promising, since no significant effect on the physico-chemical and mechanical properties of the artefacts produced was observed. Phytotoxicity test using seeds of Lactuva sativa (lettuce), Brassica juncea (mustard), Abelmoschus esculentus (okra), Chrysanthemum leucanthemum (daisy), Dendranthema grandiflorum (chrysanthemum) and Allium porrum (leek) were carried out. The results clearly show incorporation of the waste material into bricks did not influence relative germination and relative root elongation in comparison to control tests. Copyright © 2016 Elsevier Ltd. All rights reserved.

For which option is credit risk more representative on China banks' total factor productivity Efficiency change or technological progress?

Institute of Scientific and Technical Information of China (English)

Fadzlan Sufian

2012-01-01

Purpose-The purpose of this paper is to provide new empirical evidence on the impact of credit risk on China banks' total factor productivity.Design/methodology/approach-The paper employs the Malmquist Productivity Index (MP1) which allows for the examination of five different indices:total factor productivity change (TFPCH);technological change (TECHCH);efficiency change (EFFCH);pure technical efficiency change (PEFFCH);and scale efficiency change (SECH) indices.Findings-The empirical findings indicate that the State Owned Commercial Banks (SOCB),Joint Stock Commercial Banks (JSCB),and City Commercial Banks (CCB) have exhibited lower TFPCH levels with the inclusion of risk factor.It was found that the JSCB and CCB have exhibited lower TFPCH due to TECHCH,while the SOCB have exhibited lower TFPCH due to EFFCH.The empirical findings suggest that the inclusion of credit risk factor has resulted in a higher JSCB EFFCH levels.On the other hand,the SOCB and CCB have exhibited a lower EFFCH levels due to SECH and PEFFCH,respectively.Research limitations/implications-The results clearly highlight the importance of credit risk and lending quality in determining the total factor productivity change of banks operating in the China banking sector.The author demonstrates that the inclusion of credit risk factor has resulted in a lower TFPCH level of all banks operating in the China banking sector.Thus,excluding the credit risk factor from the analysis on the China banking sector may potentially bias the result upwards.Practical impIications-In an environment of heavy government influence over the lending process,a large proportion of loans extended by Chinese banks over the years have gone bad.Policymakers should prevent the flow of new non-performing loans by separating bad clients from banks that are being restructured and recapitalized in the reform of the banking sector.Originality/value-By employing the Malmquist Productivity Index (MPI),the present paper contributes to

Formal total syntheses of classic natural product target molecules via palladium-catalyzed enantioselective alkylation

Directory of Open Access Journals (Sweden)

Yiyang Liu

2014-10-01

Full Text Available Pd-catalyzed enantioselective alkylation in conjunction with further synthetic elaboration enables the formal total syntheses of a number of “classic” natural product target molecules. This publication highlights recent methods for setting quaternary and tetrasubstituted tertiary carbon stereocenters to address the synthetic hurdles encountered over many decades across multiple compound classes spanning carbohydrate derivatives, terpenes, and alkaloids. These enantioselective methods will impact both academic and industrial settings, where the synthesis of stereogenic quaternary carbons is a continuing challenge.

ECF2: A pulsed power generator based on magnetic flux compression for K-shell radiation production

International Nuclear Information System (INIS)

L'Eplattenier, P.; Lassalle, F.; Mangeant, C.; Hamann, F.; Bavay, M.; Bayol, F.; Huet, D.; Morell, A.; Monjaux, P.; Avrillaud, G.; Lalle, B.

2002-01-01

The 3 MJ energy stored ECF2 generator is developed at Centre d'Etudes de Gramat, France, for K-shell radiation production. This generator is based on microsecond LTD stages as primary generators, and on the magnetic flux compression scheme for power amplification from the microsecond to the 100ns regime. This paper presents a general overview of the ECF2 generator. The flux compression stage, a key component, will be studied in details. We will present its advantages and drawbacks. We will then present the first experimental and numerical results which show the improvements that have already been made on this scheme

Gaseous products generated by radiation degradation of N,N-diethylhydroxylamine aqueous solution

International Nuclear Information System (INIS)

Wang Jinhua; Wang Shengxiu; Bao Borong; Li Zhen; Li Chun; Zheng Weifang; Zhang Shengdong

2008-01-01

In this paper, gaseous products generated by radiation degradation of N,N-diethylhydroxylamine (DEHA) in aqueous solution are studied. The results show that by 10-1000 kGy irradiation of the solution in DEHA concentration of 0.1-0.5 mol·L -1 , the gaseous products were mainly hydrogen, methane, ethane and ethene. The volume fraction of hydrogen did not change much with different concentrations of DEHA. The volume fraction of methane and ethane decreased, but that of ethene increased, with increasing DEHA concentration. The volume fraction of hydrogen, methane and ethane increased with the dose. The relationship of the volume fraction of ethene with the dose had something to do with the DEHA concentration. (authors)

The Influence Of Highway Transportation Infrastructure Condition Toward Commodity Production Generation for The Resilience Needs at Regional Internal Zone

Science.gov (United States)

Akbardin, Juang; Parikesit, Danang; Riyanto, Bambang; Mulyono, Agus Taufik

2018-02-01

The poultry commodity consumption and requirement is one of the main commodities that must be fulfilled in a region to maintain the availability of meat from poultry. Poultry commodity production is one of the production sectors that have a clean environment resistance. An increasing of poultry commodity generation production requires a smooth distribution to arrive at the processing. The livestock location as a commodity production is placed at a considerable far distance from residential and market locations. Zones that have poultry commodity production have an excess potential to supply other zones that are lacking in production to the consumption of these commodities. The condition of highway transportation infrastructure that is very diverse with the damage level availability in a zone has an influence in the supply and demand of poultry commodity requirement in the regional internal of Central Java province. In order to know the effect of highway transportation infrastructure condition toward the poultry commodity movement, demography factor and availability of freight vehicles will be reviewed to estimate the amount of poultry commodity movement generation production. Thus the poultry commodity consumption requirement that located in the internal - regional zone of central java province can be adequated from the zone. So it can be minimized the negative impacts that affect the environment at the zone in terms of comparison of the movement attraction and generation production at poultry commodity in Central Java.

THE FACTORS AFFECTING ON THE SUCCESS OF IMPLEMENTING TOTAL PRODUCTIVE MAINTENANCE IN THE MANUFACTURING COMPANY (NS BLUESCOPE VIETNAM)

OpenAIRE

Pham Van Tai (PhD)*, Dean of International Trade, College of Foreign Economic Relations Phan Cao Huy (MBA), Technical Manager, Bosch Vietnam

2017-01-01

The competition in business environment becomes more strictly, manufacturers must introduce lots of new products on the high quality level with suitable price. Thus, new technologies have been applied, manufacturing systems become more complex. Therefore, a new strategy for maintenance such as Total productive maintenance (TPM) becomes really necessary. Many organizations have implemented TPM to increase the effectiveness of manufacturing system. However, implementation of TPM still meets a l...

Production of knock-in mice in a single generation from embryonic stem cells.

Science.gov (United States)

Ukai, Hideki; Kiyonari, Hiroshi; Ueda, Hiroki R

2017-12-01

The system-level identification and analysis of molecular networks in mammals can be accelerated by 'next-generation' genetics, defined as genetics that does not require crossing of multiple generations of animals in order to achieve the desired genetic makeup. We have established a highly efficient procedure for producing knock-in (KI) mice within a single generation, by optimizing the genome-editing protocol for KI embryonic stem (ES) cells and the protocol for the generation of fully ES-cell-derived mice (ES mice). Using this protocol, the production of chimeric mice is eliminated, and, therefore, there is no requirement for the crossing of chimeric mice to produce mice that carry the KI gene in all cells of the body. Our procedure thus shortens the time required to produce KI ES mice from about a year to ∼3 months. Various kinds of KI ES mice can be produced with a minimized amount of work, facilitating the elucidation of organism-level phenomena using a systems biology approach. In this report, we describe the basic technologies and protocols for this procedure, and discuss the current challenges for next-generation mammalian genetics in organism-level systems biology studies.

Single/total-economy aspects of production and utilization of energy from renewable raw materials

Energy Technology Data Exchange (ETDEWEB)

Meinhold, K

1982-01-01

''Biosprit (biologically produced gasohol) can compete with synthetically produced ethanol for use in commerce and industries but not fully so with petrol due to the present refinery selling prices. Nevertheless, a 10% admixture will increase the price of one litre of petrol only slightly. If the consumer is not meant to cover this price increase, it could be covered by a small proportion of those expenditures which will be saved through a changeover to biogasohol production and which have been payed for necessary export refunding so far. Even at present, there is a considerable benefit involved for the overall national economy if there was a changeover to biogasohol production. In terms of total economy, transitional or initial subsidization would be just as justified as it is with initial promotion by the government with the introduction of new technologies.

Studies of a Diazo Cyclopropanation Strategy for the Total Synthesis of (-)-Lundurine A.

Science.gov (United States)

Huang, Hong-Xiu; Jin, Shuai-Jiang; Gong, Jin; Zhang, Dan; Song, Hao; Qin, Yong

2015-09-14

The bioactive Kopsia alkaloids lundurines A-D are the only natural products known to contain indolylcyclopropane. Achieving their syntheses can provide important insights into their biogenesis, as well as novel synthetic routes for complex natural products. Asymmetric total synthesis of (-)-lundurine A has previously been achieved through a Simmons-Smith cyclopropanation strategy. Here, the total synthesis of (-)-lundurine A was carried out using a metal-catalyzed diazo cyclopropanation strategy. In order to avoid a carbene CH insertion side reaction during cyclopropanation of α-diazo- carboxylates or cyanides, a one-pot, copper-catalyzed Bamford-Stevens diazotization/diazo decomposition/cyclopropanation cascade was developed, involving hydrazone. This approach simultaneously generates the C/D/E ring system and the two chiral quaternary centers at C2 and C7. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fermentation strategy for second generation ethanol production from sugarcane bagasse hydrolyzate by Spathaspora passalidarum and Scheffersomyces stipitis.

Science.gov (United States)

Nakanishi, Simone C; Soares, Lauren B; Biazi, Luiz Eduardo; Nascimento, Viviane M; Costa, Aline C; Rocha, George Jackson M; Ienczak, Jaciane L

2017-10-01

Alcoholic fermentation of released sugars in pretreatment and enzymatic hydrolysis of biomass is a central feature for second generation ethanol (E2G) production. Saccharomyces cerevisiae used industrially in the production of first generation ethanol (E1G) convert sucrose, fructose, and glucose into ethanol. However, these yeasts have no ability to ferment pentose (xylose). Therefore, the present work has focused on E2G production by Scheffersomyces stipitis and Spathaspora passalidarum. The fermentation strategy with high pitch, cell recycle, fed-batch mode, and temperature decrease for each batch were performed in a hydrolyzate obtained from a pretreatment at 130°C with NaOH solution (1.5% w/v) added with 0.15% (w/w) of anthraquinone (AQ) and followed by enzymatic hydrolysis. The process strategy has increased volumetric productivity from 0.35 to 0.38 g · L -1  · h -1 (first to third batch) for S. stipitis and from 0.38 to 0.81 g · L -1  · h -1 for S. passalidarum (first to fourth batch). Mass balance for the process proposed in this work showed the production of 177.33 kg ethanol/ton of sugar cane bagasse for S. passalidarum compared to 124.13 kg ethanol/ton of sugar cane bagasse for S. stipitis fermentation. The strategy proposed in this work can be considered as a promising strategy in the production of second generation ethanol. Biotechnol. Bioeng. 2017;114: 2211-2221. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Production and availability of 99mTc generators and of 99Mo: technology considerations and the IAEA's contributions

International Nuclear Information System (INIS)

Ramamoorthy, N.; )

2007-01-01

The serendipitous discovery of 99m T c generator at the BNL, USA in 1957 laid the foundation for the subsequent revolution of in vivo imaging of physiological functions in humans to aid diagnostic decisions and patient management. The widespread use of diagnostic imaging in nuclear medicine would not have attained a pre-eminent status world over but for the 99m T c generator and 99m T c labelled products. In order to sustain the nearly 20 million studies annually performed using 99m T c , it is of utmost importance to assure access to appropriate technologies for continued, reliable availability of 99m T c generators and in turn, that of the raw material radionuclide 99 Mo required in extremely large quantities. A walk down the path of their production technologies to trace the trends and issues reveals several major milestones. The IAEA has been involved for well over three decades in fostering developments in 99m T c generator systems through (i) implementation of a number of CRPs including an on-going one related to the production of 99 Mo using LEU targets, (ii) arranging expert reviews through Technical/Consultancy Meetings and (iii) publication of various technical documents, e.g. IAEA-TECDOC: 515 (1989), 852, (1995), 1051 (1998) and 1065 (1999). The IAEA has also supported a number of interested Member States in establishing and/or operating 99m T c generator production facilities, as for example in Bangladesh, China, Indonesia, Iran, Pakistan and Syria. The author has been involved in several of the above initiatives of the IAEA and was also an active participant in the Indian programmes on 99m T c generators during 1972 to 2003. The present review is accordingly tailored as a narration, interspersed with the IAEA's important contributions and glimpses of the Indian scenario. (author)

Total Quality Leadership

Science.gov (United States)

1991-01-01

More than 750 NASA, government, contractor, and academic representatives attended the Seventh Annual NASA/Contractors Conference on Quality and Productivity. The panel presentations and Keynote speeches revolving around the theme of total quality leadership provided a solid base of understanding of the importance, benefits, and principles of total quality management (TQM). The presentations from the conference are summarized.

Importance of Dissolved Neutral Hg-Sulfides, Energy Rich Organic Matter and total Hg Concentrations for Methyl Mercury Production in Sediments

Science.gov (United States)

Drott, A.; Skyllberg, U.

2007-12-01

Methyl mercury (MeHg) is the mercury form that biomagnifies to the greatest extent in aquatic food webs. Therefore information about factors determining MeHg concentrations is critical for accurate risk assessment of contaminated environments. The concentration of MeHg in wetlands and sediments is the net result of: 1) methylation rates, 2) demethylation rates, and 3) input/output processes. In this study, the main controls on Hg methylation rates and total concentrations of MeHg, were investigated at eight sites in Sweden with sediments that had been subjected to local Hg contamination either as Hg(0), or as phenyl-Hg. Sediments were selected to represent a gradient in total Hg concentration, temperature climate, salinity, primary productivity, and organic C content and quality. Most sediments were high in organic matter content due to wood fibre efflux from pulp and paper industry. The pore water was analysed for total Hg, MeHg, DOC, H2S(aq), pH, DOC, Cl and Br. The chemical speciation of Hg(II) and MeHg in pore water was calculated using equilibrium models. Potential methylation and demethylation rates in sediments were determined in incubation experiments at 23° C under N2(g) for 48 h, after addition of isotopically enriched 201Hg(II) and Me204Hg. In all surface (0-20 cm) sediments there was a significant (pdetermined specific potential methylation rate constant (Km, day-1) and % MeHg (concentrations of MeHg normalized to total Hg) in the sediment. This indicates that MeHg production overruled degradation and input/output processes of MeHg in surface sediments, and that % MeHg in surface sediments may be used as a proxy for net production of MeHg. To our knowledge, these are the first data showing significant positive relationships between short term (48 h) MeHg production and longer term accumulation of MeHg, across a range of sites with different properties (1). If MeHg was not normalized to total Hg, the relationship was not significant. For sub-sets of

Generation and Evaluation of a Global Land Surface Phenology Product from Suomi-NPP VIIRS Observations

Science.gov (United States)

Zhang, X.; Liu, L.; Yan, D.; Moon, M.; Liu, Y.; Henebry, G. M.; Friedl, M. A.; Schaaf, C.

2017-12-01

Land surface phenology (LSP) datasets have been produced from a variety of coarse spatial resolution satellite observations at both regional and global scales and spanning different time periods since 1982. However, the LSP product generated from NASA's MODerate Resolution Imaging Spectroradiometer (MODIS) data at a spatial resolution of 500m, which is termed Land Cover Dynamics (MCD12Q2), is the only global product operationally produced and freely accessible at annual time steps from 2001. Because MODIS instrument is aging and will be replaced by the Visible Infrared Imaging Radiometer Suite (VIIRS), this research focuses on the generation and evaluation of a global LSP product from Suomi-NPP VIIRS time series observations that provide continuity with the MCD12Q2 product. Specifically, we generate 500m VIIRS global LSP data using daily VIIRS Nadir BRDF (bidirectional reflectance distribution function)-Adjusted reflectances (NBAR) in combination with land surface temperature, snow cover, and land cover type as inputs. The product provides twelve phenological metrics (seven phenological dates and five phenological greenness magnitudes), along with six quality metrics characterizing the confidence and quality associated with phenology retrievals at each pixel. In this paper, we describe the input data and algorithms used to produce this new product, and investigate the impact of VIIRS data time series quality on phenology detections across various climate regimes and ecosystems. As part of our analysis, the VIIRS LSP is evaluated using PhenoCam imagery in North America and Asia, and using higher spatial resolution satellite observations from Landsat 8 over an agricultural area in the central USA. We also explore the impact of high frequency cloud cover on the VIIRS LSP product by comparing with phenology detected from the Advanced Himawari Imager (AHI) onboard Himawari-8. AHI is a new geostationary sensor that observes land surface every 10 minutes, which increases

The Development of Environmental Productivity: the Case of Danish Energy Plants

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

2015-01-01

the environmental productivity of individual generator units based on a paneldata set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total environmental energy conversion productivity into conversion efficiency, best conversion practice ratio......, and conversion scale efficiency and use a global Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over...... the fourteen years. Furthermore, we find that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high...

Total aerobic destruction of azo contaminants with nanoscale zero-valent copper at neutral pH: promotion effect of in-situ generated carbon center radicals.

Science.gov (United States)

Dong, Guohui; Ai, Zhihui; Zhang, Lizhi

2014-12-01

In this study, nanoscale zero-valent copper (nZVC) was synthesized with a facile solvothermal method and used for the aerobic removal of azo contaminants at neutral pH for the first time. We found that both Cu(I) and OH generated during the nZVC induced molecular oxygen activation process accounted for the rapid total destruction of azo contaminants in the nZVC/Air system, where nZVC could activate molecular oxygen to produce H2O2, and also release Cu(I) to break the -NN- bond of azo contaminants via the sandmeyer reaction for the generation of carbon center radicals. The in-situ generated carbon center radicals would then react with OH produced by the Cu(I) catalyzed decomposition of H2O2, resulting in the generation of low molecular weight organic acids and their subsequent mineralization. The indispensible role of Cu(I) catalyzed sandmeyer reaction and the promotion effect of in-situ generated carbon center radicals on the rapid total destruction of azo contaminants in the nZVC/Air system were confirmed by gas chromatography-mass spectrometry analysis. This study can deepen our understanding on the degradation of organic pollutant with molecular oxygen activated by zero valent metal, and also provide a new method to remove azo contaminants at neutral pH. Copyright © 2014 Elsevier Ltd. All rights reserved.

Solar energy for steam generation in Brazil

Energy Technology Data Exchange (ETDEWEB)

De Carvalho, Jr, A V; Orlando, A DeF; Magnoli, D

1979-05-01

Steam generation is a solar energy application that has not been frequently studied in Brazil, even though for example, about 10% of the national primary energy demand is utilized for processing heat generation in the range of 100 to 125/sup 0/C. On the other hand, substitution of automotive gasoline by ethanol, for instance, has received much greater attention even though primary energy demand for process heat generation in the range of 100 to 125/sup 0/C is of the same order of magnitude than for total automotive gasoline production. Generation of low-temperature steam is analyzed in this article using distributed systems of solar collectors. Main results of daily performance simulation of single flat-plate collectors and concentrating collectors are presented for 20/sup 0/S latitude, equinox, in clear days. Flat plate collectors considered are of the aluminum roll-bond absorber type, selective surface single or double glazing. Considering feedwater at 20/sup 0/C, saturated steam at 120/sup 0/C and an annual solar utilization factor of 50%, a total collector area of about 3,000 m/sup 2/ is necessary for the 10 ton/day plant, without energy storage. A fuel-oil back-up system is employed to complement the solar steam production, when necessary. Preliminary economic evaluation indicates that, although the case-study shows today a long payback period relative to subsidized fuel oil in the domestic market (over 20 years in the city of Rio de Janeiro), solar steam systems may be feasible in the medium term due to projected increase of fuel oil price in Brazil.

Production of 81Rb/sup 81m/Kr generators with 60-MeV protons at BLIP

International Nuclear Information System (INIS)

Mausner, L.F.; Richards, P.

1983-01-01

By bombarding natural krypton gas with approx. 63 MeV protons, 81 Rb is formed by (p,4n) reaction from high abundance 84 Kr (57%) as well as some additional contribution from 83 Kr (11.5%) and 82 Kr (11.6%) by (p,3n) and (p,2n) reactions, respectively. The production rate of 81 Rb is typically 1.5 mCi/μAh. This production rate is sufficient to create up to several hundred millicuries per run if necessary, enough for several high activity 81 Rb/sup 81m/Kr generators. Presently generators that deliver 10 to 20 mCi to the lungs are produced weekly for on-site use. The only other important activity in the solution is Rb-82m (6.4 hr). Small amounts of Br-76 (16.1 hr), Br-77 (57 hr), Br-82 (35.5 hr), Rb-83 (86.2 d), and Rb-84 (33 d) were also present. The bromine impurities pose no problem since they are not trapped on the generator. Rb-82m and Rb-84 decay to stable Kr-82 and Kr-84 in the generator and do not interfere with Kr-81m studies

Analysis the Impact of Technology Spillovers on Total Factor Productivity of Agricultural Sector in Iran

Directory of Open Access Journals (Sweden)

Mostafa Baniasadi

2016-09-01

Full Text Available Introduction: The growth of agricultural production and natural resources are from primary objectives of any political system, because this section has a vital role in providing food security. According to the production theories, production growth will come from two sources; more use of production factors within the framework of existing technologies and second, with using more advanced and more efficient production methods and effective use of production factors. In fact, the second one is tied to the concept of productivity. New and efficient technologies are the most important factor for productivity growth. Technology was enhanced through internal and external sources. External sources include spillover technology from developed countries into another country. Empirical evidence on the impact of spillover technology on productivity growth of indigenous producer is vague. One perspective proposes that FDI, technology transferred from developed countries has positive effects on developing countries and another perspective is against it. This paper explores the role of technological spillover on total factor productivity (TFP growth in agricultural sectors of Iran uses time series data during 1971-2011. Materials and Methods: In this study, Kendrick model was used to calculate total factor productivity. After calculating productivity, affective factors on it, were examined through ARDL model. The aim of this study is examination of technology spillover on the productivity of agricultural sectors. The degree of technology diffusion grows with increase in technology distance between the hosts and the foreign countries. The greater the technology distance, the more difficult it becomes for developing countries to boost independent innovation. To calculate the index of technology spillover, commercial partners should be considered that are more advanced in science and technology than Iran. For this purpose, commercial partners in this study are

Saccharomyces cerevisiae strains for second-generation ethanol production: from academic exploration to industrial implementation

Science.gov (United States)

Jansen, Mickel L. A.; Bracher, Jasmine M.; Papapetridis, Ioannis; Verhoeven, Maarten D.; de Bruijn, Hans; de Waal, Paul P.; van Maris, Antonius J. A.; Klaassen, Paul

2017-01-01

Abstract The recent start-up of several full-scale ‘second generation’ ethanol plants marks a major milestone in the development of Saccharomyces cerevisiae strains for fermentation of lignocellulosic hydrolysates of agricultural residues and energy crops. After a discussion of the challenges that these novel industrial contexts impose on yeast strains, this minireview describes key metabolic engineering strategies that have been developed to address these challenges. Additionally, it outlines how proof-of-concept studies, often developed in academic settings, can be used for the development of robust strain platforms that meet the requirements for industrial application. Fermentation performance of current engineered industrial S. cerevisiae strains is no longer a bottleneck in efforts to achieve the projected outputs of the first large-scale second-generation ethanol plants. Academic and industrial yeast research will continue to strengthen the economic value position of second-generation ethanol production by further improving fermentation kinetics, product yield and cellular robustness under process conditions. PMID:28899031

Effect of initial total solids concentration on volatile fatty acid production from food waste during anaerobic acidification.

Science.gov (United States)

Wang, Quan; Jiang, Jianguo; Zhang, Yujing; Li, Kaimin

2015-01-01

The effect of initial total solids (TS) concentration on volatile fatty acid (VFAs) production from food waste under mesophilic conditions (35 °C) was determined. VFAs concentration and composition, biogas production, soluble chemical oxygen demand concentration, TS and volatile solids (VS) reduction, and ammonia nitrogen [Formula: see text] release were investigated. The VFAs concentrations were 26.10, 39.68, 59.58, and 62.64 g COD/L at TS contents of 40, 70, 100, and 130 g/L, respectively. While the VFAs' yields ranged from 0.467 to 0.799 g COD/g VSfed, decreased as initial TS increased. The percentage of propionate was not affected by TS concentration, accounting for 30.19-34.86% of the total VFAs, while a higher percentage of butyrate and lower percentage of acetate was achieved at a higher TS concentration. Biogas included mainly hydrogen and carbon dioxide and the maximum hydrogen yield of 148.9 ml/g VSfed was obtained at 130 g TS/L. [Formula: see text] concentration, TS and VS reductions increased as initial TS increased. Considering the above variables, we conclude that initial TS of 100 g/L shall be the most appropriate to VFAs production.

Expanding the Role of Systems Modeling: Considering Byproduct Generation from Biofuel Production

Directory of Open Access Journals (Sweden)

Kurt A. Rosentrater

2006-06-01

Full Text Available The bioethanol industry has been experiencing rapid growth over the past several years, and is expected to continue to increase production for the foreseeable future. A vital component to the success of this industry is the sales and marketing of processing residues, which are primarily sold as dried distillers grains with solubles (DDGS. Systems modeling, a technique that has been used to predict future demand for bioethanol, can also be used to determine potential byproduct generation rates. This paper discusses the development of one such model, and presents predicted generation of DDGS as well as carbon dioxide emissions from this industry through 2100. These simulation results underscore the growing need to actively pursue research focused on value-added alternatives for the use of bioethanol byproduct streams.

Bioactive Properties of Maillard Reaction Products Generated From Food Protein-derived Peptides.

Science.gov (United States)

Arihara, K; Zhou, L; Ohata, M

Food protein-derived peptides are promising food ingredients for developing functional foods, since various bioactive peptides are released from food proteins. The Maillard reaction, which plays an important role in most processed foods, generates various chemical components during processing. Although changes of amino acids or proteins and reduced sugars by the Maillard reaction have been studied extensively, such changes of peptides by the Maillard reaction are still not resolved enough. Since food protein-derived peptides are widely utilized in many processed foods, it deserves concern and research on the changes of peptides by the Maillard reaction in foods during processing or storage. This chapter initially overviewed food protein-derived bioactive peptides. Then, Maillard reaction products generated from peptides are discussed. We focused particularly on their bioactivities. © 2017 Elsevier Inc. All rights reserved.

An analysis of sodium, total fat and saturated fat contents of packaged food products advertised in Bronx-based supermarket circulars.

Science.gov (United States)

Samuel, L; Basch, C H; Ethan, D; Hammond, R; Chiazzese, K

2014-08-01

Americans' consumption of sodium, fat, and saturated fat exceed federally recommended limits for these nutrients and has been identified as a preventable leading cause of hypertension and cardiovascular disease. More than 40% of the Bronx population comprises African-Americans, who have increased risk and earlier onset of hypertension and are also genetically predisposed to salt-sensitive hypertension. This study analyzed nutrition information for packaged foods advertised in Bronx-based supermarket circulars. Federally recommended limits for sodium, saturated fat and total fat contents were used to identify foods that were high in these nutrients. The proportion of these products with respect to the total number of packaged foods was calculated. More than a third (35%) and almost a quarter (24%) of the 898 advertised packaged foods were high in saturated fat and sodium respectively. Such foods predominantly included processed meat and fish products, fast foods, meals, entrees and side dishes. Dairy and egg products were the greatest contributors of high saturated fat. Pork and beef products, fast foods, meals, entrees and side dishes had the highest median values for sodium, total fat and saturated fat content. The high proportion of packaged foods that are high in sodium and/or saturated fat promoted through supermarket circulars highlights the need for nutrition education among consumers as well as collaborative public health measures by the food industry, community and government agencies to reduce the amounts of sodium and saturated fat in these products and limit the promotion of foods that are high in these nutrients.

Differential and total M-shell X-ray production cross-sections of some selected elements between Au and U at 5.96 keV

International Nuclear Information System (INIS)

Ozdemir, Yueksel

2007-01-01

Differential M-shell X-ray production (MXRP) cross-sections for selected heavy elements between Au and U have been measured at 5.59 keV incident photon energy, respectively at seven angles varying from 120 o to 150 o a Si(Li) detector. The differential M-shell X-ray production cross-sections have been derived, using M-shell fluorescence yields, experimental total M X-ray production cross-sections and theoretical M-shell photoionization cross-sections. The differential M-shell X-ray production cross-sections have been compared with the semi-empirical fits. The measured differential M X-ray production cross-sections have been found within experimental error. Differential M X-ray production cross-section can be fitted to the Σ n a n Z n (n = 2) as a function of cos θ. Total M X-ray production cross-sections have been derived using the fitted values

Total Productive Maintenance And Role Of Interpretive Structural Modeling And Structural Equation Modeling In Analyzing Barriers In Its Implementation A Literature Review

OpenAIRE

Prasanth S. Poduval; Dr. Jagathy Raj V. P.; Dr. V. R. Pramod

2015-01-01

Abstract - The aim of the authors is to present a review of literature of Total Productive Maintenance and the barriers in implementation of Total Productive Maintenance TPM. The paper begins with a brief description of TPM and the barriers in implementation of TPM. Interpretive Structural Modeling ISM and its role in analyzing the barriers in TPM implementation is explained in brief. Applications of ISM in analyzing issues in various fields are highlighted with special emphasis on TPM. T...

TOTAL PRODUCTIVE MAINTENANCE, A CENTRAL PREOCCUPATION OF THE MANAGERS

Directory of Open Access Journals (Sweden)

Daniela POPESCU

2013-06-01

Full Text Available This present study demonstrates that the role of the mangers in the productive maintenance is currently becoming more important. This assessment is formulated starting from the daily realities regarding the growth of the proportions of productions and along with these the growth of the volume of equipments which need a better care and maintenance for a proper operation. The productive maintenance has developed and emerged out of this necessity. Therefore, the productive maintenance in the economic theory represents the maintenance of the equipments and fabric at the highest productive level by cooperating with all departments related to production. This aspect points out that the maintenance and repair works of the equipments have to be the main preoccupation of the personnel and especially of the managers.

Applicability of Sol-Gel Derived Adsorbent for the Production of (n,f) 99Mo Generator

International Nuclear Information System (INIS)

Lee, Jun-Sig; Lee, Jong-Sup; Park, Ul-Jae; Son, Kwang-Jae; Han, Hyon-Soo; Kim, Myung Sic; Koo, Sung Chan; Chung, Young-Ju

2007-01-01

High performance adsorbents as the column material for (n,γ) 99 Mo/ 99 mTc and 188 W/ 188 Re generators have been developed at KAERI. These adsorbents should have enough loading capacities to produce such generators with high activities as the loading isotopes are not carrier-free. In this regard, the adsorbents are synthesized by sol-gel processing in which the ligand density can easily be adjusted and maximized. The marginal capacity of such adsorbents should be higher than 200 mg/g for molybdenum. From the previous works, the sol-gel processing techniques are adequately applied to meet the criteria. Further studies are being undertaken to employ the adsorbents for the production of high capacity (n,f) 99 Mo/ 99 mTc. Domestically, a private company has lined up the production facility of the molybdenum generator in the activity range of 300 ∼ 1,000 mCi/ea. The column elements are composed of manganese oxide doped on silica and alumina at the backup layer. In this column, the manganese oxide is the main reactive layer to retain (n,f) 99 Mo. The sol-gel derived adsorbent, in this study, is employed as the replacement of the manganese oxide doped silica in the column and tested for the loading efficiency of (n,f) 99 Mo, elution of 99 mTc, labeling property of the eluted 99 mTc. The same loading and elution procedures as the commercial production are applied for the tests and quality controls

Study on the green total factor productivity in main cities of China

Directory of Open Access Journals (Sweden)

Zhang Jiansheng

2016-06-01

Full Text Available The aim of this research is to investigate China’s urban green total factor productivity (TFP under the background of progressing urbanization and intensifying environmental pollution, and found out its main influencing factors. In this paper, green TFP of 285 prefecture-level cities in China from 2005 to 2012 was estimated through Malmquist productivity index. Results showed that the annual growth of green TFP in main cities in China is 3.5% and the overall growth declines gradually. Viewed from decomposition of green TFP, technical progress is the main contributor of green TFP growth. Furthermore, the northern coastal region has achieved the highest annual growth of green TFP (4.5% and the northwest region achieved the lowest growth of green TFP (1.24%, indicating the great regional differences of green TFP and economic growth quality in China. According to analysis on influencing factors of green TFP in main cities, it has been concluded that per-capita urban road area, number of Internet users, proportion of fiscal expenditures, environmental regulation level and technical input are significantly positively correlated with green TFP, while industrial structure and foreign direct investment (FDI are significantly negatively correlated. Finally, policy suggestions to improve urban green TFP in China were proposed.

Strategies toward the commercialization PZC-based Tc-99m generator in the Philippines

International Nuclear Information System (INIS)

Borras, Ma. Teresa L.; Sombrito, Elvira Z.; Dela Rosa, Alumanda M.; Osorio, Rizalina G.; Bulos, Adelina DM.

2007-01-01

Technetium-99m ( 99m Tc) is the most widely used radioisotope in nuclear medicine. It accounts for more than 80% of the total demand for radioisotopes. Alone or conjugated with other ligands, it is very useful in the imaging and scanning of various organs such as the brain, lungs, kidneys, liver, thyroid and bone and in the diagnosis of metabolic disorders. It is imported to the country as 99 Mo- 99m Tc generators. These commercial generators use fission molybdenum adsorbed onto alumina column. A Draft Business Plan for the Production of PZC 99 Mo- 99m Tc Generator in the Philippines was presented during the FNCA 2005 Workshop on the Utilization of Research Reactors, August 08-12, 2005. The Philippine Nuclear Research Institute (PNRI) proposed in the draft business plan, the commercial production of PZC generator through the establishment of a facility for the in-house production of 99 Mo- 99m Tc generators. The radioisotope laboratory of the Irradiation Services Unit will be renovated to house the PZC based 99 Mo- 99m Tc generator experiment/production facility. Since the research reactor is on extended shutdown, the supply of 99 Mo will be sourced out from neighboring countries. Information dissemination and promotions will be made in order to bring this PZC based 99 Mo- 99m Tc generator to the nuclear medicine users. (author)

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Anders, John Kenneth; The ATLAS collaboration

2015-01-01

Naturalness arguments for weak-scale supersymmetry favour supersymmetric partners of the third generation quarks with masses not too far from those of their Standard Model counterparts. Top or bottom squarks with masses less than a few hundred GeV can also give rise to direct pair production rates at the LHC that can be observed in the data sample recorded by the ATLAS detector. The talk presents a summary of the ATLAS results from searches for direct stop and sbottom pair production, using the data collected during LHC run1, as well as sensitivity projections for the data that will be collected in 2015.

FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

Studies and Investigation about the Attitude towards Sustainable Production, Consumption and Waste Generation in Line with Circular Economy in Romania

Directory of Open Access Journals (Sweden)

Elena Simina Lakatos

2018-03-01

Full Text Available With a rapidly growing world population and the need to address the issue of consumption of global resource and its associated environmental impacts and other social and economic issues, the demand for a responsible consumption, production and prevention of waste generation become increasingly crucial. With this broad characterization of Sustainable Consumption and Production (SCP, businesses based on circular economy should become the norm. With this goal in mind, an online questionnaire survey was performed on a nationwide scale, to explore consumers’ behaviors and attitudes. It was distributed in all four of Romania’s macro-regions and reached 642 respondents. The purpose of the study has been to better understand consumers’ behavior regarding sustainable consumption and production and examine whether generations play a role in responsible consumer attitudes toward the products. Three generations (X, Y, and Z have been examined and compared. The results show that what extent those three generation agree with the environment and the benefits of reducing resource consumption, also waste generation, selective collection, recycling and reuse. However, most of them have not adopted and do not intend to adopt consumer patterns based on the circular economy. The findings provide empirical evidence and directions that could help marketers identify their consumer’s characteristics and market segments and develop consumer empowerment strategies on the Romanian market.

The Development of Environmental Productivity: the Case of Danish Energy Plants

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

TOTAL PRODUCTIVE MAINTENANCE, A CENTRAL PREOCCUPATION OF THE MANAGERS

OpenAIRE

Daniela POPESCU; Adriana SCRIOŞTEANU; ANDREI POPESCU

2013-01-01

This present study demonstrates that the role of the mangers in the productive maintenance is currently becoming more important. This assessment is formulated starting from the daily realities regarding the growth of the proportions of productions and along with these the growth of the volume of equipments which need a better care and maintenance for a proper operation. The productive maintenance has developed and emerged out of this necessity. Therefore, the productive maintenance in the eco...

Land availability for biofuel production.

Science.gov (United States)

Cai, Ximing; Zhang, Xiao; Wang, Dingbao

2011-01-01

Marginal agricultural land is estimated for biofuel production in Africa, China, Europe, India, South America, and the continental United States, which have major agricultural production capacities. These countries/regions can have 320-702 million hectares of land available if only abandoned and degraded cropland and mixed crop and vegetation land, which are usually of low quality, are accounted. If grassland, savanna, and shrubland with marginal productivity are considered for planting low-input high-diversity (LIHD) mixtures of native perennials as energy crops, the total land availability can increase from 1107-1411 million hectares, depending on if the pasture land is discounted. Planting the second generation of biofuel feedstocks on abandoned and degraded cropland and LIHD perennials on grassland with marginal productivity may fulfill 26-55% of the current world liquid fuel consumption, without affecting the use of land with regular productivity for conventional crops and without affecting the current pasture land. Under the various land use scenarios, Africa may have more than one-third, and Africa and Brazil, together, may have more than half of the total land available for biofuel production. These estimations are based on physical conditions such as soil productivity, land slope, and climate.

Quantitative study of the production rate of droplets in a T-junction microdroplet generator

Science.gov (United States)

Fu, Hai; Zeng, Wen; Li, Songjing

2017-12-01

In a T-junction microdroplet generator, a mathematical model which can quantify the production rate of droplets is demonstrated. The experiments of droplet formation are performed for different geometries of the T-junction microchannels, and good agreements are shown between the predicted and the measured values of the droplet production rates. From both theoretical and experimental study, the production rate of droplets varies nonlinearly with the flow-rate ratio of the two phases during droplet formation, and by fixing the flow-rate ratio, the production rate of droplets is approximately a linear function of the flow rate of the fluids. In particular, the coefficients of the linear relation are only determined by the geometrical parameters of the T-junction microchannel. As a result, our model can be validated experimentally, and especially for a specific geometry of the T-junction, the production rate of droplets can be precisely predicted and controlled based on the flow rate of the fluids.

Total productivity; strategy report in 2003

International Nuclear Information System (INIS)

2004-01-01

This book gives KMA message, the actual conditions and results of manufacturing competitiveness and maintenance management in 2003, a good illustration of success strategies and best practice report. It has column, special edition and success strategy. Also it presents chage of manufacturing processes and customized production, new paradime 'preservation business management' acording to informationization. And it covers secore energy policy fit for world trend and high grade suggestion of correct objective.

Self generation, small generation, and embedded generation issues

International Nuclear Information System (INIS)

2001-01-01

The New Brunswick Market Design Committee for electric power restructuring has been directed to examine issues regarding cogeneration and small-scale, on-site generation and how they will fit within the framework of the bilateral contract market. The Committee will also have to deal with issues of generation embedded in a distribution system. The Committee has defined cogeneration as the simultaneous production of electricity and useful thermal energy. Self-generation has been defined as small-scale power generation by an end-user, while embedded generation has been defined as a generation facility that is located within a distribution utility but is not directly connected to the transmission system. The Committee has postponed its decision on whether embedded generation will be eligible to participate under the bilateral contract market for electricity. This report discusses general issues such as the physical support of generation, market support of generation, transition issues and policy issues. It also discusses generation support issues such as operating reserves, transmission tariff issues, and distribution tariffs. Market support issues such as transmission access for generation sales were also considered, along with market access for generation sales, and net metering for behind the meter generation. 7 refs., 1 tab

Developing SyrinOX total antioxidant capacity assay for measuring antioxidants in humans.

Science.gov (United States)

Prasetyo, Endry N; Knes, Otto; Nyanhongo, Gibson S; Guebitz, Georg M

2013-02-01

Accurate monitoring of the antioxidant status or of oxidative stress in patients is still a big challenge in clinical laboratories. This study investigates the possibility of applying a newly developed total antioxidant capacity assay method based on laccase or peroxidase oxidized syringaldazine [Tetramethoxy azobismethylene quinone (TMAMQ)] which is referred to here as SyrinOX, as a diagnostic tool for monitoring both oxidative stress and antioxidant status in patients. Attempts to adapt the Randox total antioxidant procedure [simultaneous incubation of the radical generating system (metmyoglobin and H(2) O(2) ) and antioxidant sample] for SyrinOX were abandoned after it was discovered that the H(2) O(2) reacted with enzymatically generated TMAMQ and ABTS radicals at a rate of 6.4 × 10(-2) /μM/s and 5.7 × 10(-3) /μM/s respectively. Thus this study for the first time demonstrates the negative effects of H(2) O(2) in the Randox system. This leads to erroneous results because the total antioxidant values obtained are the sum of radicals reduced by antioxidants plus those reacting with the radical generating system. Therefore they should be avoided not only for this particular method but also when using other similar methods. Consequently, SyrinOX is best applied using a three-step approach involving, production of TMAMQ, recovery and purification (free from enzyme and other impurities) and then using TMAMQ for measuring the total antioxidant capacity of samples. Using this approach, the reaction conditions for application of SyrinOX when measuring the total antioxidant capacity of plasma sample were determined to be 50% (v/v) ethanol/50 mM sodium succinate buffer pH 5.5, between 20 and 25 °C for at least 1 h. © 2012 The Authors. International Journal of Experimental Pathology © 2012 International Journal of Experimental Pathology.

Diagnostic and Therapeutic RI Generators

International Nuclear Information System (INIS)

Lee, Jong-Sup; Lee, Jun-Sig; Park, Ul-Jae; Han, Hyon-Soo

2006-01-01

Different types of generators have been developed for the convenient use of 99m Tc as the demand for this radioisotope is strong. Currently, the demand for 99m Tc is more than 80 % of the total demand for medical isotopes in the world. A 99m Tc generator, in general, is composed of a column packed with ceramic adsorbent, tubing, eluent reservoir or vials, collection vials, and shielding. The key technology to develop a good generator is how to load 99 Mo as much as possible while maintaining the quality of eluted 99 mTc as good as possible. The technology is well developed and already available commercially for the case of the fission 99 Mo/ 99 mTc because loading of few curries of 99 Mo on a conventional adsorbent, i.e. alumina is not a serious task in the chemical point of view. However, the current infrastructure of the supply of 99 Mo to the world market is sturdy as the research reactors are getting aged. In this regard, alternative research activities to develop generators with (n,γ) 99 Mo have been performed by different groups. To develop commercially viable (n,γ) 99 Mo/ 99 mTc generator, the generator column should have high adsorption capacity for molybdenum at least several fold higher than the fission 99 Mo generator column. To achieve such high adsorption capacity, gel generator, PZC, and other technologies have been developed. However, there are still many restrictions to apply these technologies for the commercial production. As one of the latter approaches, several candidate adsorbents have been developed. One of the new adsorbents developed at Korea Atomic Energy Research Institute shows a high adsorption capacity for Mo (∼200 mg/g) and reasonable elution efficiency for 99 mTc (60 (∼ 80%). In addition, (n,γ 99 Mo can be loaded by a column operation just like fission Mo generator production

Total water production capacity inversion phenomenon in multi-stage direct contact membrane distillation: A theoretical study

KAUST Repository

Lee, Jung Gil

2017-09-09

The low thermal efficiency and low water production are among the major challenges that prevent membrane distillation (MD) process from being commercialized. In an effort to design an efficient multi-stage direct contact MD (DCMD) unit through mathematical simulation, a new phenomenon that we refer to as total water production capacity inversion (WPI) has been detected. It is represented by a decrease in the total water production beyond a number of stages or a certain module length. WPI phenomenon, which was confirmed by using two different mathematical models validated experimentally, was found to take place due to the decrease in water vapor flux across the membrane as well as the increase in heat loss by conduction as the membrane length increases. Therefore, WPI should be considered as a critical MD design-criterion, especially for large scale units. Investigations conducted for a simulated multi-stage DCMD process showed that inlet feed and permeate temperatures difference, feed and permeate flow rates, and feed salinity have different effects on WPI. The number of stages (or module length at constant width) that leads to a maximum water production has been determined for different operating parameters. Decreasing inlet feed and permeate temperatures difference, or inlet feed and permeate flow rates and increasing inlet feed temperature at constant temperature difference or inlet feed salinity cause the WPI to take place at lower number of stages. Even though the feed salinity affects negligibly the mean permeate flux, it was clearly shown that it can affect WPI. The results presented herein unveil a hidden phenomenon that is likely to occur during process scale-up procedures and should be considered by process engineers for a proper choice of system design and operating conditions.

Effect of feed supplement on Milk Production, Fat % Total Serum Protein and Minerals in Lactating Buffalo

Directory of Open Access Journals (Sweden)

R.K. Verma

2009-10-01

Full Text Available A study was carried out to see the effect of feed supplement “Khurak” on milk yielding buffalo. The buffaloes were divided in two group. One group was offered “Khurak” as feed supplement for 7 days. Significant increase was observed in milk production, Total serum protein and calcium in khurak supplemented group (Treatment group. [Vet. World 2009; 2(5.000: 193-194

Stochastic Frontier Approach and Data Envelopment Analysis to Total Factor Productivity and Efficiency Measurement of Bangladeshi Rice

Science.gov (United States)

Hossain, Md. Kamrul; Kamil, Anton Abdulbasah; Baten, Md. Azizul; Mustafa, Adli

2012-01-01

The objective of this paper is to apply the Translog Stochastic Frontier production model (SFA) and Data Envelopment Analysis (DEA) to estimate efficiencies over time and the Total Factor Productivity (TFP) growth rate for Bangladeshi rice crops (Aus, Aman and Boro) throughout the most recent data available comprising the period 1989–2008. Results indicate that technical efficiency was observed as higher for Boro among the three types of rice, but the overall technical efficiency of rice production was found around 50%. Although positive changes exist in TFP for the sample analyzed, the average growth rate of TFP for rice production was estimated at almost the same levels for both Translog SFA with half normal distribution and DEA. Estimated TFP from SFA is forecasted with ARIMA (2, 0, 0) model. ARIMA (1, 0, 0) model is used to forecast TFP of Aman from DEA estimation. PMID:23077500

Financial results achieved in short-day strawberry production

Directory of Open Access Journals (Sweden)

Galić Dragan

2014-01-01

Full Text Available In South-western Ontario's continental climate (short days, hot summers and very cold winters the matted-row system was the dominant production system to grow short-day strawberries. Varieties-staggered production (planting a combination of early, mid and late-season varieties provides strawberry harvest from five to seven weeks. Short-day strawberries are vegetative grown in the first year, and harvested for two consecutive years. The total cost of short-day strawberry production was 54,370 $CAD/ha. The production and harvest costs in the first and second years were 20,812 $CAD/ha and 16,930 $CAD/ ha, respectively, and accounted for 69.42% of the total. Pre-plans operations were the least expensive procedures costing 8.13%, while planting and care of young plants made up 22.45% of the total costs. The total income of growing short-day strawberries under a matted-row system was 76,671 $CAD/ha (the first and second production years 41,330 $CAD/ha and 35,341 $CAD/ha, respectively. The short-day strawberries in matted-row system, with average yield of 15,722 kg/ha, generated a net revenue of 22,300 $CAD/ha.

Total 2004 annual report; TOTAL 2004 rapport annuel

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This annual report of the Group Total brings information and economic data on the following topics, for the year 2004: the corporate governance, the corporate social responsibility, the shareholder notebook, the management report, the activities, the upstream (exploration and production) and downstream (refining and marketing) operating, chemicals and other matters. (A.L.B.)

Hydrogen-oxygen steam generator applications for increasing the efficiency, maneuverability and reliability of power production

Science.gov (United States)

Schastlivtsev, A. I.; Borzenko, V. I.

2017-11-01

The comparative feasibility study of the energy storage technologies showed good applicability of hydrogen-oxygen steam generators (HOSG) based energy storage systems with large-scale hydrogen production. The developed scheme solutions for the use of HOSGs for thermal power (TPP) and nuclear power plants (NPP), and the feasibility analysis that have been carried out have shown that their use makes it possible to increase the maneuverability of steam turbines and provide backup power supply in the event of failure of the main steam generating equipment. The main design solutions for the integration of hydrogen-oxygen steam generators into the main power equipment of TPPs and NPPs, as well as their optimal operation modes, are considered.

Next-Generation Bio-Products Sowing the Seeds of Success for Sustainable Agriculture

Directory of Open Access Journals (Sweden)

Henry Müller

2013-10-01

Full Text Available Plants have recently been recognized as meta-organisms due to a close symbiotic relationship with their microbiome. Comparable to humans and other eukaryotic hosts, plants also harbor a “second genome” that fulfills important host functions. These advances were driven by both “omics”-technologies guided by next-generation sequencing and microscopic insights. Additionally, these new results influence applied fields such as biocontrol and stress protection in agriculture, and new tools may impact (i the detection of new bio-resources for biocontrol and plant growth promotion, (ii the optimization of fermentation and formulation processes for biologicals, (iii stabilization of the biocontrol effect under field conditions, and (iv risk assessment studies for biotechnological applications. Examples are presented and discussed for the fields mentioned above, and next-generation bio-products were found as a sustainable alternative for agriculture.

Combining the catalytic enantioselective reaction of visible-light-generated radicals with a by-product utilization system.

Science.gov (United States)

Huang, Xiaoqiang; Luo, Shipeng; Burghaus, Olaf; Webster, Richard D; Harms, Klaus; Meggers, Eric

2017-10-01

We report an unusual reaction design in which a chiral bis-cyclometalated rhodium(iii) complex enables the stereocontrolled chemistry of photo-generated carbon-centered radicals and at the same time catalyzes an enantioselective sulfonyl radical addition to an alkene. Specifically, employing inexpensive and readily available Hantzsch esters as the photoredox mediator, Rh-coordinated prochiral radicals generated by a selective photoinduced single electron reduction are trapped by allyl sulfones in a highly stereocontrolled fashion, providing radical allylation products with up to 97% ee. The hereby formed fragmented sulfonyl radicals are utilized via an enantioselective radical addition to form chiral sulfones, which minimizes waste generation.

Optimization of Protein Extraction from Spirulina platensis to Generate a Potential Co-Product and a Biofuel Feedstock with Reduced Nitrogen Content

Energy Technology Data Exchange (ETDEWEB)

Parimi, Naga Sirisha; Singh, Manjinder; Kastner, James R.; Das, Keshav C., E-mail: kdas@engr.uga.edu [College of Engineering, The University of Georgia, Athens, GA (United States); Forsberg, Lennart S.; Azadi, Parastoo [Complex Carbohydrate Research Center, The University of Georgia, Athens, GA (United States)

2015-06-23

The current work reports protein extraction from Spirulina platensis cyanobacterial biomass in order to simultaneously generate a potential co-product and a biofuel feedstock with reduced nitrogen content. S. platensis cells were subjected to cell disruption by high-pressure homogenization and subsequent protein isolation by solubilization at alkaline pH followed by precipitation at acidic pH. Response surface methodology was used to optimize the process parameters – pH, extraction (solubilization/precipitation) time and biomass concentration for obtaining maximum protein yield. The optimized process conditions were found to be pH 11.38, solubilization time of 35 min and biomass concentration of 3.6% (w/w) solids for the solubilization step, and pH 4.01 and precipitation time of 60 min for the precipitation step. At the optimized conditions, a high protein yield of 60.7% (w/w) was obtained. The protein isolate (co-product) had a higher protein content [80.6% (w/w)], lower ash [1.9% (w/w)] and mineral content and was enriched in essential amino acids, the nutritious γ-linolenic acid and other high-value unsaturated fatty acids compared to the original biomass. The residual biomass obtained after protein extraction had lower nitrogen content and higher total non-protein content than the original biomass. The loss of about 50% of the total lipids from this fraction did not impact its composition significantly owing to the low lipid content of S. platensis (8.03%).

Optimization of Protein Extraction from Spirulina platensis to Generate a Potential Co-Product and a Biofuel Feedstock with Reduced Nitrogen Content

International Nuclear Information System (INIS)

Parimi, Naga Sirisha; Singh, Manjinder; Kastner, James R.; Das, Keshav C.; Forsberg, Lennart S.; Azadi, Parastoo

2015-01-01

The current work reports protein extraction from Spirulina platensis cyanobacterial biomass in order to simultaneously generate a potential co-product and a biofuel feedstock with reduced nitrogen content. S. platensis cells were subjected to cell disruption by high-pressure homogenization and subsequent protein isolation by solubilization at alkaline pH followed by precipitation at acidic pH. Response surface methodology was used to optimize the process parameters – pH, extraction (solubilization/precipitation) time and biomass concentration for obtaining maximum protein yield. The optimized process conditions were found to be pH 11.38, solubilization time of 35 min and biomass concentration of 3.6% (w/w) solids for the solubilization step, and pH 4.01 and precipitation time of 60 min for the precipitation step. At the optimized conditions, a high protein yield of 60.7% (w/w) was obtained. The protein isolate (co-product) had a higher protein content [80.6% (w/w)], lower ash [1.9% (w/w)] and mineral content and was enriched in essential amino acids, the nutritious γ-linolenic acid and other high-value unsaturated fatty acids compared to the original biomass. The residual biomass obtained after protein extraction had lower nitrogen content and higher total non-protein content than the original biomass. The loss of about 50% of the total lipids from this fraction did not impact its composition significantly owing to the low lipid content of S. platensis (8.03%).

A prototype data assimilation framework for generating spatiotemporally continuous SWOT data products

Science.gov (United States)

Andreadis, K.; Margulis, S. A.; Li, D.; Lettenmaier, D. P.

2017-12-01

The Surface Water and Ocean Topography (SWOT) satellite will provide critical surface water observations for the hydrologic community. However, production of key SWOT variables, such as river discharge and surface inundation, as well as lake, reservoir, and wetland storage change will be complicated by the discontinuity of the observations in space and time. A methodology that generates products with spatially and temporally continuous fields based on SWOT observables would be highly desirable. Data assimilation provides a mechanism for merging observations from SWOT with model predictions in order to produce estimates of quantities such as river discharge, storage change, and water heights for locations and times when there is no satellite overpass or other constraints (such as layover) render the measurement unusable. We describe here a prototype assimilation system with application to the Upper Mississippi basin, implemented using synthetic SWOT observations. We use a hydrologic model (VIC) coupled with a hydrodynamic model (LISFLOOD-FP) which generates "true" fields of surface water variables. The true fields are then used to generate synthetic SWOT observations using the SWOT Instrument Simulator. We also perform a "first-guess" (or open-loop) simulation with the coupled model using a configuration that contains errors representative of the imperfect knowledge of parameters and input data, including channel topography, bankfull widths and depths, and inflows, to create an ensemble of 20 model trajectories. Subsequently we assimilate the synthetic SWOT observations into the open-loop model results to estimate water surface elevation, discharge, and storage change. Our preliminary results using three data assimilation strategies show that all improve the water surface elevation estimate accuracy by 25% - 35% for a river reach of the upper Mississippi River. Ongoing work is examining whether the improved water surface elevation estimates propagate to improvements

Product analysis and initial reliability testing of the total mesorectal excision-quality assessment instrument.

Science.gov (United States)

Simunovic, Marko R; DeNardi, Franco G; Coates, Angela J; Szalay, David A; Eva, Kevin W

2014-07-01

Product analysis of rectal cancer resection specimens before specimen fixation may provide an immediate and relevant evaluation of surgical performance. We tested the interrater reliability (IRR) of a product analysis tool called the Total Mesorectal Excision-Quality Assessment Instrument (TME-QA). Participants included two gold standard raters, five pathology assistants, and eight pathologists. Domains of the TME-QA reflect total mesorectal excision principles including: (1) completeness of mesorectal margin; (2) completeness of mesorectum; (3) coning of distal mesorectum; (4) physical defects; and (5) overall specimen quality. Specimens were scored independently. We used the generalizability theory to assess the tool's internal consistency and IRR. There were 39 specimens and 120 ratings. Mean overall specimen quality scores for the gold standard raters, pathologists, and assistants were 4.43, 4.43, and 4.50, respectively (p > 0.85). IRR for the first nine items was 0.68 for the full sample, 0.62 for assistants alone, 0.63 for pathologists alone, and 0.74 for gold standard raters alone. IRR for the item overall specimen quality was 0.67 for the full sample, 0.45 for assistants, 0.80 for pathologists, and 0.86 for gold standard raters. IRR increased for all groups when scores were averaged across two raters. Assessment of surgical specimens using the TME-QA may provide rapid and relevant feedback to surgeons about their technical performance. Our results show good internal consistency and IRR when the TME-QA is used by pathologists. However, for pathology assistants, multiple ratings with the averaging of scores may be needed.

Determination of thermal characteristics of combustion products of fire-tube heat generator with flow turbulator

OpenAIRE

Lukjanov Alexander V.; Ostapenko Dmitry V.; Basist Dmitry V.

2014-01-01

Boiler construction is one of the major industries of any state. The aim is to determine the effect of the turbulator on the intensity of heat transfer in the convective part of the fire-tube heat generator of domestic production. The improvement of convective heating surfaces is one of the ways to increase the energy efficiency of the fire-tube heat generator. Since model of the process of heat transfer of gas flow in the convective tubes is multifactorial and does not have clear analytical ...

Corrosion-product inventory: the Bruce-B secondary system

International Nuclear Information System (INIS)

Sawicki, J.A.; Price, J.; Brett, M.E.

1995-01-01

Corrosion inspection and corrosion-product characterization in water and steam systems are important for component and systems maintenance in nuclear power stations. Corrosion products are produced, released and redeposited at various sites in the secondary system. Depending on the alloys used in the condenser and feedwater heaters, particulate iron oxides and hydroxides can account for about 95-99% of the total corrosion-product transport. Where brass or cupro-nickel alloys are present, copper and zinc contribute significantly to the total transport and deposition. Particulates are transported by the feedwater to the steam generators, where they accumulate and can cause a variety of problems, such as loss of heat transfer capability through deposition on boiler tubes, blockage of flow through boiler-tube support plates and accelerated corrosion in crevices, either in deep sludge piles or at blocked tube supports. The influx of oxidized corrosion products may have a particularly adverse effect on the redox environment of steam generator tubing, thereby increasing the probability of localized corrosion and other degradation mechanisms. In this paper, there is a description of a survey of general corrosion deposits in Bruce-B, Units 5-8, which helps to identify the origin, evolution and inventory of corrosion products along the secondary system of Candu reactors

Investigation of the radionuclide inventory and the production yields of the target stacks at the PEFP radioisotope production facility

International Nuclear Information System (INIS)

Yoon, Sang-Pil; Hong, In-Seok; Cho, Yong-Sub

2010-01-01

The Proton Engineering Frontier Project (PEFP) will construct a radioisotope production facility by using the nuclear reaction between the 100-MeV proton beam and the solid target. For investigating the radionuclide inventory and the production yield of the radioisotope production facility, we have optimized the thickness of the prototype target stacks by using a SRIM calculation. The target stacks consist of RbCl encapsulated in inconel alloy, Zn metal, and Ga metal encapsulated in niobium. Typical beam parameters were 300 μA and 95 hours. An inventory of all generated radionuclide activities is mandatory in order to prepare the operation scenario and design the hot cell. The Monte Carlo code MCNPX was used to investigate what radionuclide is generated. The obtained radionuclide inventory indicated that about 100 radionuclides were generated and that the total radioactivity of the irradiated target stacks was 1324.1 Ci at the end of the bombardment. The production yields of Sr-82, Cu-67, and Ge-68 were 3.79 Ci, 2.74 Ci, and 1.23 Ci at the end of the bombardment.

Effects of zilpaterol hydrochloride on methane production, total body oxygen consumption, and blood metabolites in finishing beef steers

Science.gov (United States)

An indirect calorimetry experiment was conducted to determine the effects of feeding zilpaterol hydrochloride (ZH) for 20 d on total body oxygen consumption, respiratory quotient, methane production, and blood metabolites in finishing beef steers. Sixteen Angus steers (initial BW = 555 ± 12.7 kg) w...

Have Market-oriented Reforms Decoupled China’s CO2 Emissions from Total Electricity Generation? An Empirical Analysis

Directory of Open Access Journals (Sweden)

Wei Shang

2016-05-01

Full Text Available Achieving the decoupling of electric CO2 emissions from total electricity generation is important in ensuring the sustainable socioeconomic development of China. To realize this, China implemented market-oriented reforms to its electric power industry at the beginning of 2003. This study used the Tapio decoupling index, the Laspeyres decomposition algorithm, and decoupling-related data from 1993 to 2012 to evaluate the effect of these reforms. Several conclusions can be drawn based on the empirical analysis. (1 The reforms changed the developmental trend of the decoupling index and facilitated its progress towards strong decoupling. (2 The results forecasted through fitting the curve to the decoupling index indicate that strong decoupling would be realized by 2030. (3 Limiting the manufacturing development and upgrading the generation equipment of the thermal power plants are essential for China to achieve strong decoupling at an early date. (4 China should enhance regulatory pressures and guidance for appropriate investment in thermal power plants to ensure the stable development of the decoupling index. (5 Transactions between multiple participants and electricity price bidding play active roles in the stable development of the decoupling index.

Energetic and exergoeconomic assessment of a multi-generation energy system based on indirect use of geothermal energy

International Nuclear Information System (INIS)

Akrami, Ehsan; Chitsaz, Ata; Nami, Hossein; Mahmoudi, S.M.S.

2017-01-01

In this paper, a geothermal based multi-generation energy system, including organic Rankine cycle, domestic water heater, absorption refrigeration cycle and proton exchange membrane electrolyzer, is developed to generate electricity, heating, cooling and hydrogen. For this purpose, energetic, exergetic and exergoeconomic analysis are undertaken upon proposed system. Also, the effects of some important variables, i.e. geothermal water temperature, turbine inlet temperature and pressure, generator temperature, geothermal water mass flow rate and electrolyzer current density on the several parameters such as energy and exergy efficiencies of the proposed system, heating and cooling load, net electrical output power, hydrogen production, unit cost of each system products and total unit cost of the products are investigated. For specified conditions, the results show that energy and exergy efficiencies of the proposed multi-generation system are calculated about 34.98% and 49.17%, respectively. The highest and lowest total unit cost of the products estimated approximately 23.18 and 22.73 $/GJ, respectively, by considering that geothermal water temperature increases from 185 °C to 215 °C. - Highlights: • A multigeneration energy system based on geothermal energy is developed. • The energetic, exergetic and exergoeconomic analysis are undertaken upon proposed system. • The influences of several significant parameters are investigated. • The energy and exergy efficiencies of the entire system are calculated around 34.98% and 49.17%.

Differences among total and in vitro digestible phosphorus content of meat and milk products.

Science.gov (United States)

Karp, Heini; Ekholm, Päivi; Kemi, Virpi; Hirvonen, Tero; Lamberg-Allardt, Christel

2012-05-01

Meat and milk products are important sources of dietary phosphorus (P) and protein. The use of P additives is common both in processed cheese and meat products. Measurement of in vitro digestible phosphorus (DP) content of foods may reflect absorbability of P. The objective of this study was to measure both total phosphorus (TP) and DP contents of selected meat and milk products and to compare amounts of TP and DP and the proportion of DP to TP among different foods. TP and DP contents of 21 meat and milk products were measured by inductively coupled plasma optical emission spectrometry (ICP-OES). In DP analysis, samples were digested enzymatically, in principle, in the same way as in the alimentary canal before the analyses. The most popular national brands of meat and milk products were chosen for analysis. The highest TP and DP contents were found in processed and hard cheeses; the lowest, in milk and cottage cheese. TP and DP contents in sausages and cold cuts were lower than those in cheeses. Chicken, pork, beef, and rainbow trout contained similar amounts of TP, but slightly more variation was found in their DP contents. Foods containing P additives have a high content of DP. Our study confirms that cottage cheese and unenhanced meats are better choices than processed or hard cheeses, sausages, and cold cuts for chronic kidney disease patients, based on their lower P-to-protein ratios and sodium contents. The results support previous findings of better P absorbability in foods of animal origin than in, for example, legumes. Copyright © 2012 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

A viable technology to generate third-generation biofuel

DEFF Research Database (Denmark)

Singh, Anoop; Olsen, Stig Irving; Nigam, Poonam Singh

2011-01-01

First generation biofuels are commercialized at large as the production technologies are well developed. However, to grow the raw materials, there is a great need to compromise with food security, which made first generation biofuels not so much promising. The second generation of biofuels does...

Control-oriented modeling of the energy-production of a synchronous generator in a nuclear power plant

International Nuclear Information System (INIS)

Fodor, Attila; Magyar, Attila; Hangos, Katalin M.

2012-01-01

Nuclear Power Plant (Hungary) is developed in this paper based on first engineering principles that is able to describe the time-varying active and reactive power output of the generator. These generators are required to take part in the reactive power support of the power grid following the demand of a central dispatch center, and also contribute to the frequency control of the grid. The developed model has been verified under the usual controlled operating conditions when the frequency and the active power are controlled. Static and dynamic sensitivity analysis has been applied to determine the model parameters to be estimated. The model parameters have been estimated applying the asynchronous parallel pattern search method using real measured data from the nuclear power plant. The confidence regions in the parameter space have been analyzed by investigating the geometry of the estimation error function. The developed model can serve as a basis for controlling the optimal energy production of the generator using both the active and reactive power components. -- Highlights: ► A dynamic model of a synchronous generator in a Nuclear Power Plant is developed. ► The model has been verified under the usual controlled operating conditions. ► The sensitivity analysis has been applied to determine the model parameters. ► The parameters have been estimated applying the APPS method using measured data. ► The model serves as a basis for controlling the optimal energy production of the generator.

Chemical control and design considerations for CANDU-PHW steam generators

International Nuclear Information System (INIS)

Frost, C.R.; Churchill, B.R.

1978-01-01

Ontario Hydro presently operates eight nuclear power units with a total capacitiy of about 4000 MW(e) net. Operating experience has been with Monel-400 and with Inconel-600 tubed steam generators using sodium phosphate or all volatile control of the boiler steam and water system. With a heavy water Heat Transport System, steam generator tube integrity is an essential ingredient of economical power production. Only three steam generator tube failures have occurred so far in about 40 unit-years operation. None was attributable to corrosion. Factors in the good reliability are, careful engineering design, good quality control at all stages of tubing and steam generator manufacture and close chemical control. The continuing evolution of our steam generator design means that future requirements will be more stringent. (author)

A radionuclide generator for the production of 211Pb and its daughters

International Nuclear Information System (INIS)

Atcher, R.W.; Friedman, A.M.; Huizenga, J.R.

1989-01-01

211 Pb and its daughters are produced in a generator system which utilizes the distillation of the intermediate daughter 219 Rn from 223 Ra. The radium is precipitated as the stearate to isolate the parent while allowing the gaseous daughter to emanate. While the yield of the system is low, approximately 10%, the radionuclidic purity is extremely high. No measurable 223 Ra is found in the product. 223 Ra is separated from its parent, 227 Ac, by cation exchange. (author) 7 refs

Conceptualisation for implementing total productive maintenance throught the ISO 9001:2008 standard-based quality management system

Directory of Open Access Journals (Sweden)

Sivaram, N. M.

2013-08-01

Full Text Available his paper conceptualises the integration of total productive maintenance (TPM and ISO 9001 certification by contributing a model called TPM 9001:2008. Through this conceptualisation, the eight TPM pillars are amended to the five major clauses of the ISO 9001:2008 standard. To illustrate this conceptualisation, the contents of a sub-clause of the TPM 9001:2008 model are presented, and the rationale behind its designation is appraised.

Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

International Nuclear Information System (INIS)

Walsh, D.; Strandgard, M.

2014-01-01

Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

Pulmonary function in relation to total dust exposure at a bauxite refinery and alumina-based chemical products plant.

Science.gov (United States)

Townsend, M C; Enterline, P E; Sussman, N B; Bonney, T B; Rippey, L L

1985-12-01

A cross-sectional study of 1,142 male employees at the Arkansas Operations of a large aluminum production company examined the effect on pulmonary function of chronic exposure to total dust produced in the mining and refining of bauxite and the production of alumina chemicals. Never smokers, ex-smokers, and current smokers were analyzed separately. Among never smokers, a pattern of decreasing FEV1 was observed in relation to increasing duration and cumulative total dust exposure. Among never smokers with cumulative total dust exposures of greater than or equal to 100 mg/m3 yr and greater than or equal to 20 yr of exposure, there was a mean reduction from the predicted FEV1 of 0.29 to 0.39 L, in addition to a 3- to 4-fold excess of observed/expected numbers of subjects with FEV1 less than 80% of predicted. These results were observed relative to an external and an internal comparison group. Among current smokers, the deviations from predicted and the excess numbers of subjects with FEV1 less than 80% of predicted were larger in all exposure groups than for the never smokers. However, the quality of the smoking data was inadequate to allow separation of the effects of smoking and dust exposure.

Determination of total inorganic arsenic in potable water through spectroscopy of atomic absorption with generation of hydride

International Nuclear Information System (INIS)

Rodriguez Roman, S.

1997-01-01

This study developed a method for the cuantitative analysis of arsenic in potable water , through the spectrophotometric technique of atomic absorption. It used an automatic system of injection of flux for the generation of hydrides. It studied the effect produced by reducer agents, in the prereduction of arsenic in water, obtaining the best result with the use of potasium iodide 1.5% and ascorbic acid 0.25% in hydrochloric acid 3.7%, for the direct determination of total inorganic arsenic. It observed the effect produced by cadmium and selenium to the half of the concentration of arsenic, chromium, lead and silver at the same concentration, and barium at a ten times higher concentration, in the recuperation of total inorganic arsenic. It also used sodium borohydride 0.3% in sodium hydroxide 0.05% (5mL/min), for the formation of the volatile hydrides. It used hydrochloric acid 3.7% (12 mL/min) as disolution of transport; argon as inert gas, and a flame air-acetylene, for the atomization of the hydrides. This method was applied to 19 samples of potable water, and the result was no detectable for all of them. (S. Grainger)

Estimation of regional building-related C&D debris generation and composition: case study for Florida, US.

Science.gov (United States)

Cochran, Kimberly; Townsend, Timothy; Reinhart, Debra; Heck, Howell

2007-01-01

Methodology for the accounting, generation, and composition of building-related construction and demolition (C&D) at a regional level was explored. Six specific categories of debris were examined: residential construction, nonresidential construction, residential demolition, nonresidential demolition, residential renovation, and nonresidential renovation. Debris produced from each activity was calculated as the product of the total area of activity and waste generated per unit area of activity. Similarly, composition was estimated as the product of the total area of activity and the amount of each waste component generated per unit area. The area of activity was calculated using statistical data, and individual site studies were used to assess the average amount of waste generated per unit area. The application of the methodology was illustrated using Florida, US approximately 3,750,000 metric tons of building-related C&D debris were estimated as generated in Florida in 2000. Of that amount, concrete represented 56%, wood 13%, drywall 11%, miscellaneous debris 8%, asphalt roofing materials 7%, metal 3%, cardboard 1%, and plastic 1%. This model differs from others because it accommodates regional construction styles and available data. The resulting generation amount per capita is less than the US estimate - attributable to the high construction, low demolition activity seen in Florida.

Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification

International Nuclear Information System (INIS)

Lu, W L; Jiang, X; Liu, X J; Xu, Z G

2008-01-01

Compliance uncertainty is one of the most important elements in the next-generation geometrical product specifications and verification (GPS). It consists of specification uncertainty, method uncertainty and implementation uncertainty, which are three of the four fundamental uncertainties in the next-generation GPS. This paper analyzes the key factors that influence compliance uncertainty and then proposes a procedure to manage the compliance uncertainty. A general model on evaluation of compliance uncertainty has been devised and a specific formula for diameter characteristic has been derived based on this general model. The case study was conducted and it revealed that the completeness of currently dominant diameter characteristic specification needs to be improved

Variation in excess oxidant factor in combustion products of MHD generator. [Natural gas fuel

Energy Technology Data Exchange (ETDEWEB)

Pinkhasik, M S; Mironov, V D; Zakharko, Yu A; Plavinskii, A I

1977-12-01

Methods and difficulties associated with determining the excess oxidant factor for natural gas-fired MHD generators are discussed. The measurement of this factor is noted to be essential for the optimization of the combustion chamber and operation of MHD generators. A gas analyzer of electrochemical type is considered as a quick - response sensor capable of analyzing the composition of the combustion products and thus determining accurately the excess oxidant factor. The principle of operation of this sensor is discussed and the dependence of the electrochemical sensor emf on excess oxidant factor is shown. Three types of sensors are illustrated and tables of test results are provided.

Searches for direct pair production of third generation squarks with the ATLAS detector

CERN Document Server

Gonski, Julia Lynne; The ATLAS collaboration

2018-01-01

Searches for supersymmetry are a key focus of the LHC experimental program. In particular, natural SUSY models motivate third generation squarks with masses light enough to be produced at the LHC. As a result, the ATLAS experiment has a variety of analyses devoted to stop/sbottom direct production. In this talk, recent results from these searches for are discussed, and the current stop/sbottom mass exclusion limits are presented.

Radiolytic gas generation in plutonium contaminated waste materials

International Nuclear Information System (INIS)

Kazanjian, A.R.

1976-01-01

Many plutonium contaminated waste materials decompose into gaseous products because of exposure to alpha radiation. The gases generated (usually hydrogen) over long-storage periods may create hazardous conditions. To determine the extent of such hazards, knowing the gas generation yields is necessary. These yields were measured by contacting some common Rocky Flats Plant waste materials with plutonium and monitoring the enclosed atmospheres for extensive periods of time. The materials were Plexiglas, polyvinyl chloride, glove-box gloves, machining oil, carbon tetrachloride, chlorothene VG solvent, Kimwipes (dry and wet), polyethylene, Dowex-1 resin, and surgeon's gloves. Both 239 Pu oxide and 238 Pu oxide were used as radiation sources. The gas analyses were made by mass spectrometry and the results obtained were the total gas generation, the hydrogen generation, the oxygen consumption rate, and the gas composition over the entire storage period. Hydrogen was the major gas produced in most of the materials. The total gas yields varied from 0.71 to 16 cm 3 (standard temperature pressure) per day per curie of plutonium. The oxygen consumption rates varied from 0.0088 to 0.070 millimoles per day per gram of plutonium oxide-239 and from 0.0014 to 0.0051 millimoles per day per milligram 238 Pu

Assessment of the Potential of Biomass Gasification for Electricity Generation in Bangladesh

Directory of Open Access Journals (Sweden)

Barun Kumar Das

2014-01-01

Full Text Available Bangladesh is an agriculture based country where more than 65 percent of the people live in rural areas and over 70% of total primary energy consumption is covered by biomass, mainly agricultural waste and wood. Only about 6% of the entire population has access to natural gas, primarily in urban areas. Electricity production in Bangladesh largely depends on fossil fuel whose reserve is now under threat and the government is now focusing on the alternating sources to harness electricity to meet the continuous increasing demand. To reduce the dependency on fossil fuels, biomass to electricity could play a vital role in this regard. This paper explores the biomass based power generation potential of Bangladesh through gasification technology—an efficient thermochemical process for distributed power generation. It has been estimated that the total power generation from the agricultural residue is about 1178 MWe. Among them, the generation potential from rice husk, and bagasses is 1010 MWe, and 50 MWe, respectively. On the other hand, wheat straw, jute stalks, maize residues, lentil straw, and coconut shell are also the promising biomass resources for power generation which counted around 118 MWe. The forest residue and municipal solid waste could also contribute to the total power generation 250 MWe and 100 MWe, respectively.

A prototype on-line work procedure system for radioisotope thermoelectric generator production

International Nuclear Information System (INIS)

Kiebel, G.R.

1991-09-01

An on-line system to manage work procedures is being developed to support radioisotope thermoelectric generator (RTG) assembly and testing in a new production facility. This system implements production work procedures as interactive electronic documents executed at the work site with no intermediate printed form. It provides good control of the creation and application of work procedures and provides active assistance to the worker in performing them and in documenting the results. An extensive prototype of this system is being evaluated to ensure that it will have all the necessary features and that it will fit the user's needs and expectations. This effort has involved the Radioisotope Power Systems Facility (RPSF) operations organization and technology transfer between Westinghouse Hanford Company (Westinghouse Hanford) and EG ampersand G Mound Applied Technologies Inc. (Mound) at the US Department of Energy (DOE) Mound Site. 1 ref

Total cross sections for heavy flavour production at HERA

CERN Document Server

Frixione, Stefano; Nason, P; Ridolfi, G; Frixione, S; Mangano, M L; Nason, P; Ridolfi, G

1995-01-01

We compute total cross sections for charm and bottom photoproduction at HERA energies, and discuss the relevant theoretical uncertainties. In particular we discuss the problems arising from the small-x region, the uncertainties in the gluon parton density, and the uncertainties in the hadronic component of the cross section. Total electroproduction cross sections, calculated in the Weizs\\"acker-Williams approximation, are also given.

Determinants of urea nitrogen production in sepsis. Muscle catabolism, total parenteral nutrition, and hepatic clearance of amino acids.

Science.gov (United States)

Pittiruti, M; Siegel, J H; Sganga, G; Coleman, B; Wiles, C E; Placko, R

1989-03-01

The major determinants of urea production were investigated in 26 patients with multiple trauma (300 studies). The body clearances (CLRs) of ten amino acids (AAs) were estimated as a ratio of muscle-released AAs plus total parenteral nutrition-infused AAs to their extracellular pool. While clinically septic trauma (ST) patients without multiple-organ failure syndrome (MOFS) had a higher level of urea nitrogen production (25.6 +/- 13.4 g of N per day) compared with nonseptic trauma (NST) patients (14 +/- 7.5 g of N per day) and with ST patients with MOFS (4.28 +/- 1.5 g of N per day), in all groups urea N production was found to be a function of muscle protein degradation (catabolism), total parenteral nutrition-administered AAs, and the ratio between leucine CLR and tyrosine CLR (L/T) (r2 = .82, P less than .0001). Since tyrosine is cleared almost exclusively by the liver, the L/T ratio may be regarded as an index of hepatic function. The significant differences between urea N production in ST and NST patients lay in an increased positive dependence on muscle catabolism and increased negative correlation with L/T in the ST group. At any L/T ratio, urea N production was increased in ST patients over NST patients, but in ST patients with MOFS, it fell to or below levels of NST patients. These data show that the ST process is associated with enhancement of ureagenesis, due to increased hepatic CLR of both exogenous and endogenous AAs. In sepsis with MOFS, a marked inhibition of urea synthesis occurs, partially explained by a decreased hepatic CLR of non-branched-chain AAs.

Total Hip Intraoperative Femur Fracture: Do the Design Enhancements of a Second-Generation Tapered-Wedge Stem Reduce the Incidence?

Science.gov (United States)

Colacchio, Nicholas D; Robbins, Claire E; Aghazadeh, Mehran S; Talmo, Carl T; Bono, James V

2017-10-01

Intraoperative femur fracture (IFF) is a well-known complication in primary uncemented total hip arthroplasty (THA). Variations in implant instrumentation design and operative technique may influence the risk of IFF. This study investigates IFF between a standard uncemented tapered-wedge femoral stem and its second-generation successor with the following design changes: size-specific medial curvature, proportional incremental stem growth, modest reduction in stem length, and distal lateral relief. A single experienced surgeon's patient database was retrospectively queried for IFF occurring during primary uncemented THA using a standard tapered-wedge femoral stem system or a second-generation stem. All procedures were performed using soft tissue preserving anatomic capsule repair and posterior approach. The primary outcome measure was IFF. A z-test of proportions was performed to determine significant difference between the 2 stems with respect to IFF. Patient demographics, Dorr classification, and implant characteristics were also examined. Forty-one of 1510 patients (2.72%) who received a standard tapered-wedge femoral stem sustained an IFF, whereas 5 of 800 patients (0.63%) using the second-generation stem incurred an IFF. No other significant associations were found. A standard tapered-wedge femoral stem instrumentation system resulted in greater than 4 times higher incidence of IFF than its second-generation successor used for primary uncemented THA. Identifying risk factors for IFF is necessary to facilitate implant system improvements and thus maximize patient outcomes. Copyright © 2017. Published by Elsevier Inc.

Secondary organic aerosol production from pinanediol, a semi-volatile surrogate for first-generation oxidation products of monoterpenes

Science.gov (United States)

Ye, Penglin; Zhao, Yunliang; Chuang, Wayne K.; Robinson, Allen L.; Donahue, Neil M.

2018-05-01

We have investigated the production of secondary organic aerosol (SOA) from pinanediol (PD), a precursor chosen as a semi-volatile surrogate for first-generation oxidation products of monoterpenes. Observations at the CLOUD facility at CERN have shown that oxidation of organic compounds such as PD can be an important contributor to new-particle formation. Here we focus on SOA mass yields and chemical composition from PD photo-oxidation in the CMU smog chamber. To determine the SOA mass yields from this semi-volatile precursor, we had to address partitioning of both the PD and its oxidation products to the chamber walls. After correcting for these losses, we found OA loading dependent SOA mass yields from PD oxidation that ranged between 0.1 and 0.9 for SOA concentrations between 0.02 and 20 µg m-3, these mass yields are 2-3 times larger than typical of much more volatile monoterpenes. The average carbon oxidation state measured with an aerosol mass spectrometer was around -0.7. We modeled the chamber data using a dynamical two-dimensional volatility basis set and found that a significant fraction of the SOA comprises low-volatility organic compounds that could drive new-particle formation and growth, which is consistent with the CLOUD observations.

Determination of the total $c\\overline{c}$ production cross section in 340 GeV/c $\\Sigma^{-}$ - nucleus interactions

CERN Document Server

Adamovich, M.I.; Barberis, D.; Beck, M.; Berat, C.; Beusch, W.; Boss, M.; Brons, S.; Bruckner, W.; Buenerd, M.; Busch, C.; Buscher, C.; Charignon, F.; Chauvin, J.; Chudakov, E.A.; Dersch, U.; Dropmann, F.; Engelfried, J.; Faller, F.; Fournier, A.; Gerassimov, S.G.; Godbersen, M.; Grafstrom, P.; Haller, T.; Heidrich, M.; Hubbard, E.; Hurst, R.B.; Konigsmann, Kay; Konorov, I.; Keller, N.; Martens, K.; Martin, P.; Masciocchi, S.; Michaels, R.; Muller, U.; Neeb, H.; Newbold, D.; Newsom, C.; Paul, S.; Pochodzalla, J.; Potashnikova, I.; Povh, B.; Ransome, R.; Ren, Z.; Rey-Campagnolle, M.; Rosner, G.; Rossi, L.; Rudolph, H.; Scheel, C.; Schmitt, L.; Siebert, H.W.; Simon, A.; Smith, V.J.; Thilmann, O.; Trombini, A.; Vesin, E.; Volkemer, B.; Vorwalter, K.; Walcher, T.; Walder, G.; Werding, R.; Wittmann, E.; Zavertyaev, M.V.

2000-01-01

The production of charmed particles by Sigma- of 340 Gev/c momentum was studied in the hyperon beam experiment WA89 at the CERN-SPS, using the Omega-spectrometer. In two data-taking periods in 1993 and 1994 an integrated luminosity of 1600 microb^-1 on copper and carbon targets was recorded. From the reconstruction of 930 +- 90 charm particle decays in 10 decay channels production cross sections for D, antiD, Ds and Lambdac were determined in the region xF>0. Assuming an A^1 dependence of the cross section on the nucleon number, we calculate a total ccbar production cross section of sigma(x_F > 0) = 5.3+- 0.4(stat)+-1.0(syst)+1.0(Xi_c) microb per nucleon. The last term is an upper limit on the unknown contribution from charmed-strange baryon production.

Seasonal to hour variation scales in abundance and production of total and particle-attached bacteria in the open NW Mediterranean Sea (0–1000 m

Directory of Open Access Journals (Sweden)

G. Mével

2008-11-01

Full Text Available We present the vertical and temporal dynamics of total vs. particle-attached bacterial abundance and activity over a 5 week period under summer to autumn transition in NW Mediterranean Sea. At a weekly time scale, total bacterial biomass and production in the euphotic layers was significantly correlated with phytoplanktonic biomass. At an hourly time scale, total bacterial biomass responded very rapidly to chlorophyll a fluctuations, suggesting a tight coupling between phytoplankton and bacteria for resource partitioning during the summer-autumn transition. In contrast, no influence of diel changes on bacterial parameters was detected. Episodic events such as coastal water intrusions had a significant positive effect on total bacterial abundance and production, whereas we could not detect any influence of short wind events whatever the magnitude. Finally, we show that particle-attached bacteria can represent a large proportion (up to 49% of the total bacterial activity in the euphotic layer but display rapid and sporadic changes at hourly time scales. In the mesopelagic layers, bacterial abundance and production linearly decreased with depth, except some production peaks at 400–750 m. This study underlines the value of large datasets covering different temporal scales to clarify the biogeochemical role of bacteria in the cycling of organic matter in open seawater.

Generation of Plausible Hurricane Tracks for Preparedness Exercises

Science.gov (United States)

2017-04-25

product kernel. KDE with a beta kernel gene- rates maximum sustained winds, and linear regression simulates minimum central pressure. Maximum significant...the Storm level models the number of waypoints M , birth and death locations w1 and wM , and total number of steps L. The Stage level models the...MATLAB and leverages HURDAT2 to construct data-driven statistical models that can generate plausible yet never-before-seen storm behaviors. For a

The precise and accurate production of millimetric water droplets using a superhydrophobic generating apparatus

Science.gov (United States)

Wood, Michael J.; Aristizabal, Felipe; Coady, Matthew; Nielson, Kent; Ragogna, Paul J.; Kietzig, Anne-Marie

2018-02-01

The production of millimetric liquid droplets has importance in a wide range of applications both in the laboratory and industrially. As such, much effort has been put forth to devise methods to generate these droplets on command in a manner which results in high diameter accuracy and precision, well-defined trajectories followed by successive droplets and low oscillations in droplet shape throughout their descents. None of the currently employed methods of millimetric droplet generation described in the literature adequately addresses all of these desired droplet characteristics. The reported methods invariably involve the cohesive separation of the desired volume of liquid from the bulk supply in the same step that separates the single droplet from the solid generator. We have devised a droplet generation device which separates the desired volume of liquid within a tee-apparatus in a step prior to the generation of the droplet which has yielded both high accuracy and precision of the diameters of the final droplets produced. Further, we have engineered a generating tip with extreme antiwetting properties which has resulted in reduced adhesion forces between the liquid droplet and the solid tip. This has yielded the ability to produce droplets of low mass without necessitating different diameter generating tips or the addition of surfactants to the liquid, well-defined droplet trajectories, and low oscillations in droplet volume. The trajectories and oscillations of the droplets produced have been assessed and presented quantitatively in a manner that has been lacking in the current literature.

EOSCUBE: A Constraint Database System for High-Level Specification and Efficient Generation of EOSDIS Products. Phase 1; Proof-of-Concept

Science.gov (United States)

Brodsky, Alexander; Segal, Victor E.

1999-01-01

The EOSCUBE constraint database system is designed to be a software productivity tool for high-level specification and efficient generation of EOSDIS and other scientific products. These products are typically derived from large volumes of multidimensional data which are collected via a range of scientific instruments.

Event generation for next to leading order chargino production at the international linear collider

Energy Technology Data Exchange (ETDEWEB)

Robens, T.

2006-10-15

At the International Linear Collider (ILC), parameters of supersymmetry (SUSY) can be determined with an experimental accuracy matching the precision of next-to-leading order (NLO) and higher-order theoretical predictions. Therefore, these contributions need to be included in the analysis of the parameters. We present a Monte-Carlo event generator for simulating chargino pair production at the ILC at next-to-leading order in the electroweak couplings. We consider two approaches of including photon radiation. A strict fixed-order approach allows for comparison and consistency checks with published semianalytic results in the literature. A version with soft- and hard-collinear resummation of photon radiation, which combines photon resummation with the inclusion of the NLO matrix element for the production process, avoids negative event weights, so the program can simulate physical (unweighted) event samples. Photons are explicitly generated throughout the range where they can be experimentally resolved. In addition, it includes further higher-order corrections unaccounted for by the fixed-order method. Inspecting the dependence on the cutoffs separating the soft and collinear regions, we evaluate the systematic errors due to soft and collinear approximations for NLO and higher-order contributions. In the resummation approach, the residual uncertainty can be brought down to the per-mil level, coinciding with the expected statistical uncertainty at the ILC. We closely investigate the two-photon phase space for the resummation method. We present results for cross sections and event generation for both approaches. (orig.)

Seaweed utilization for integrated bioenergy and fish feed production

DEFF Research Database (Denmark)

Seghetta, Michele

2016-01-01

and processing of seaweed compared to other energies and protein production technologies. Optimization of cultivation design could reduce externalities generated by the materials use. Optimization of storage methods, e.g. drying, is necessary to reduce the total energy consumption. Improvement......Linear production systems are not environmentally sustainable since they produce waste at a higher rate than nature is able to absorb. Creation of closed-loop production processes aiming at generating zero-waste is the foundation for a circular economy. Offshore seaweed cultivation can play a key...... role to transform linear production systems into biobased circular flows. Seaweed can absorb manmade emissions to water, while producing valuable compounds that can re-enter the economic system. In the thesis, Life Cycle Assessment (LCA) methodology is used to analyze the environmental performance...

High purity heavy water production: need for total organic carbon determination in process water streams