Heavy metal content of combustible municipal solid waste in Denmark.

Science.gov (United States)

Riber, Christian; Fredriksen, Gry S; Christensen, Thomas H

2005-04-01

Data on the heavy metal composition of outlets from Danish incinerators was used to estimate the concentration of Zn, Cu, Pb, Cr, Ni, Cd, As and Hg in combustible waste (wet as received) at 14 Danish incinerators, representing about 80% of the waste incinerated in Denmark. Zn (1020 mg kg(-1)), Cu (620 mg kg(-1)) and Pb (370 mg kg(-1)) showed the highest concentration, whereas Hg (0.6 mg kg(-1)) showed the lowest concentration. The variation among the incinerators was in most cases within a factor of two to three, except for Cr that in two cases showed unexplained high concentrations. The fact that the data represent many incinerators and, in several cases, observations from a period of 4 to 5 years provides a good statistical basis for evaluating the content of heavy metals in combustible Danish waste. Such data may be used for identifying incinerators receiving waste with high concentrations of heavy metals suggesting the introduction of source control, or, if repeated in time, the data must also be used for monitoring the impacts of national regulation controlling heavy metals. It is recommended that future investigations consider the use of sample digestion methods that ensure complete digestion in order to use the data for determining the total heavy metal content of waste.

Effect of extraction solvent on total phenol content, total flavonoid content, and antioxidant activity of Limnophila aromatica

Directory of Open Access Journals (Sweden)

Quy Diem Do

2014-09-01

Full Text Available Limnophila aromatica is commonly used as a spice and a medicinal herb in Southeast Asia. In this study, water and various concentrations (50%, 75%, and 100% of methanol, ethanol, and acetone in water were used as solvent in the extraction of L. aromatica. The antioxidant activity, total phenolic content, and total flavonoid content of the freeze-dried L. aromatica extracts were investigated using various in vitro assays. The extract obtained by 100% ethanol showed the highest total antioxidant activity, reducing power and DPPH (2,2-diphenyl-1-picrylhydrazyl radical scavenging activity. The same extract also exhibited the highest phenolic content (40.5 mg gallic acid equivalent/g of defatted L. aromatica and the highest flavonoid content (31.11 mg quercetin equivalent/g of defatted L. aromatica. The highest extraction yield was obtained by using 50% aqueous acetone. These results indicate that L. aromatica can be used in dietary applications with a potential to reduce oxidative stress.

Wide-scale utilization of MSWI fly ashes in cement production and its impact on average heavy metal contents in cements: The case of Austria.

Science.gov (United States)

Lederer, Jakob; Trinkel, Verena; Fellner, Johann

2017-02-01

A number of studies present the utilization of fly ashes from municipal solid waste incineration (MSWI) in cement production as a recycling alternative to landfilling. While there is a lot of research on the impact of MSWI fly ashes utilization in cement production on the quality of concrete or the leaching of heavy metals, only a few studies have determined the resulting heavy metal content in cements caused by this MSWI fly ashes utilization. Making use of the case of Austria, this study (1) determines the total content of selected heavy metals in cements currently produced in the country, (2) designs a scenario and calculates the resulting heavy metal contents in cements assuming that all MSWI fly ashes from Austrian grate incinerators were used as secondary raw materials for Portland cement clinker production and (3) evaluates the legal recyclability of demolished concretes produced from MSWI fly ash amended cements based on their total heavy metal contents. To do so, data from literature and statistics are combined in a material flow analysis model to calculate the average total contents of heavy metals in cements and in the resulting concretes according to the above scenario. The resulting heavy metal contents are then compared (i) to their respective limit values for cements as defined in a new technical guideline in Austria (BMLFUW, 2016), and (ii) to their respective limit values for recycling materials from demolished concrete. Results show that MSWI fly ashes utilization increases the raw material input in cement production by only +0.9%, but the total contents of Cd by +310%, and Hg, Pb, and Zn by +70% to +170%. However these and other heavy metal contents are still below their respective limit values for Austrian cements. The same legal conformity counts for recycling material derived from concretes produced from the MSWI fly ash cements. However, if the MSWI fly ash ratio in all raw materials used for cement production were increased from 0.9% to 22

The heavy metals content in wild growing mushrooms from burdened Spiš area

Directory of Open Access Journals (Sweden)

Marek Slávik

2016-05-01

Full Text Available In this work, we evaluated the rate of entry of heavy metals into the edible parts of wild mushrooms, from central Spiš area. The area is characterized by extremely high content of heavy metals particularly mercury in abiotic and biotic components of ecosystems. The toxicity of heavy metals is well known and described. Known is also the ability of fungi to accumulate contaminants from substrates in which mushrooms grow. We have collected commonly consumed species of mushrooms (Russula vesca., Macrolepiota procera, Lycoperdon pyriforme, Lecinum piceinum, Boletus reticulatus. Sampling was conducted for two years 2012 and 2013. The samples taken mushrooms and substrates on which to grow, we determined heavy metal content (Cd, Pb, Cu, including total mercury content modified by atomic absorption spectrometry (AMA - 254. In the substrate, we determined the humus content and pH value. The heavy metal content in soils were evaluated according to Law no. 220/2004 Z.z The exceedance limit values of Cd, Pb, Cu and Hg was recorded. Most significantly the respective limit was recorded in soil samples in the case of mercury. The determined concentration Hg was 39.01 mg.kg-1. From the results, we evaluated the degree of ability to bioaccumulate heavy metals different kinds of fungi. We also evaluated the health safety of the consumption of these fungi on the comparison with the limit values provided in the food code of SR. We recorded a high rate of accumulation of mercury in the species Boletus reticulatus and Macrolepiota procera. For these types we recorded the most significant than allowed concentrations of mercury in mushrooms. The highest recorded concentration reached 17.64 mg.kg-1 Hg in fresh matter. The limit value was exceeded also in the case of copper. We do not recommend to increased consumption of wild mushrooms in the reference area.

Mineral Composition, Total Phenol Content and Antioxidant Activity of a Macrolichen Everniastrum cirrhatum (Fr. Hale (Parmeliaceae

Directory of Open Access Journals (Sweden)

T. R. Prashith Kekuda

2011-01-01

Full Text Available In the present study, we investigated for the first time mineral composition, total phenol content and antioxidant activity of a foliose macrolichen Everniastrum cirrhatum (Fr. Hale (Parmeliaceae from Bhadra wildlife sanctuary, Karnataka, India. Mineral content of the lichen was estimated by Atomic absorption spectrophotometer after acid digestion. The secondary metabolites were detected by thin layer chromatography (TLC and phytochemical assays. The lichen material was extracted with methanol in soxhlet apparatus. Total phenol content was estimated by folin ciocalteu method. Antioxidant activity was determined by DPPH, Ferric reducing and metal chelating assays. Among the principal elements, calcium was found in high concentration followed by magnesium, potassium and phosphorus. Among trace elements, iron was detected in high amount followed by zinc, manganese and copper. The DPPH radical scavenging activity was found to be dose dependent with an IC50 of 6.73 μg/mL. In ferric reducing assay, the absorbance increased with the concentration of extract suggesting reducing power. The extract exhibited good metal chelating activity with an IC50 value of 29.28 μg/mL. Total phenol content was 101.2 mg tannic acid equivalents per gram of extract. Phytochemical analysis revealed the presence of alkaloids, saponins, tannins and terpenoids. TLC revealed atranorin, salazinic acid and protolichesterinic acid. The lichen can be consumed as a source of minerals required for the body as appreciable amount of minerals has been detected. The marked antioxidant activity may be attributed to the presence of phenol content in the extract. Further studies on isolation of metabolites and their bioactivities are under investigation.

Plasma trace metals during total parenteral alimentation.

Science.gov (United States)

Solomons, N W; Layden, T J; Rosenberg, I H; Vo-Khactu, K; Sandstead, H H

1976-06-01

The plasma concentrations of the trace metals zinc and copper were studied prospectively in 13 patients with gastrointestinal diseases treated with parenteral alimentation (TPA) for periods of from 8 days to 7 1/2 weeks. Plasma copper levels fell rapidly and consistently in all patients, with an overall rate of - 11 mug per 100 ml per week. Zinc concentrations declined in 10 of 13 patients at a more gradual rate. Analysis of the standard parenteral alimentation fluids revealed zinc content equivalent to 50% of the daily requirement and a negligible content of copper. From combined analysis of plasma zinc, hair zinc, and taste acuity, there is evidence that increased utilization or redistribution within the body may effect plasma concentrations in some patients. Neither an increase in urinary excretion nor a primary decrease in plasma binding proteins appeared to be a major factor in lowering plasma trace metal concentrations. These findings indicate that a marked decrease in plasma copper is regular and a decline in plasma zinc is common during TPA using fluids unsupplemented with trace metals. Supplementation of parenteral alimentation fluids with the trace metals zinc and copper is recommended.

Correlation between heavy metal contents and antioxidants in medicinal plants grown in mining areas

International Nuclear Information System (INIS)

Maharia, R.; Dutta, R.K.; Acharya, R.; Reddy, A.V.R.

2010-01-01

Full texts: Medicinal plants are widely used as alternate therapeutic agents for various diseases. Three medicinal plants grown in copper mining regions of Khetri in Rajasthan was analyzed for heavy metal contents by instrumental neutron activation analysis. The copper levels were found to be two to three folds higher in these plant leaves as compared to the reported copper levels in the medicinal plants grown in environmentally friendly regions. In our previous study on heavy metals in soil and medicinal plant of Khetri region we have shown bioaccumulation of Cu in the medicinal plants. In addition, the levels of Cr, Fe and Zn were also higher. Antioxidant properties of medicinal plants are one of their major therapeutic functionalities. The role of elevated levels of heavy metals in the medicinal plants was studied with respect to their antioxidant properties. Standard procedures were used for measuring total phenols, flavanoids and DPPH assay of these medicinal plants which were correlated with the heavy metals contents of these plants

Heavy metals content in degraded agricultural soils of a mountain region related to soil properties

Science.gov (United States)

Navarro-Pedreño, José; Belén Almendro-Candel, María; Gómez, Ignacio; Jordán, Manuel M.; Bech, Jaume; Zorpas, Antonis

2017-04-01

Agriculture has been practiced for long time in Mediterranean regions. Intensive agriculture and irrigation have developed mainly in the valleys and coastal areas. In the mountainous areas, dry farming has been practiced for centuries. Soils have been fertilized using mainly organic amendments. Plants extracted nutrients and other elements like heavy metals presented in soils and agricultural practices modified soil properties that could favor the presence of heavy metals. In this work, it has been checked the content of heavy metals in 100 agricultural soils samples of the NorthWest area of the province of Alicante (Spain) which has been long cultivated with cereals and olive trees, and now soils are abandoned and degraded because of the low agricultural yields. European policy has the aim to improve the sustainable agriculture and recover landscapes of mountain regions. So that, it is important to check the state of the soils (Marques et al. 2007). Soils samples (arable layer) were analyzed determining: pH (1:5, w/v, water extract), equivalent calcium carbonate content, organic matter by Walkley-Black method (Nelson and Sommers 1996), micronutrients (Cu, Fe, Mn, Zn) extracted with DTPA (Lindsay and Norvell, 1978) and measured by atomic absorption spectrometry, and total content of metals (Cd, Cr, Ni, Pb) measured in soil samples after microwave acid digestion (Moral et al. 1996), quantifying the content of metals by ICP analysis. The correlation between soil properties and metals. The results indicated that pH and carbonates are the most important properties of these soils correlated with the metals (both micronutrients and heavy metals). The available micronutrients (all of them) are close correlated with the pH and carbonates in soils. Moreover, heavy metals like Pb and Ni are related to available Mn and Zn. Keywords: pH, carbonates, heavy metals, abandoned soils. References: Lindsay,W.L., andW.A. Norvell. 1978. "Development of a DTPA Soil Test for Zinc, Iron

Heavy metal contents and other physical quality indices of sewerage, canal and drinking water

International Nuclear Information System (INIS)

Mahmood, S.; Sattar, A.; Ihsanullash; Atta, S.; Arif, S. University of Engineering and Technology, Peshawar

2001-01-01

Analysis of Cd, Pb and Cu in canal, sewerage and drinking water by potentiometric stripping analysis (PSA) is described. Other quality indices of water such as temperature, pH, EC and total solid were also determined. The levels of heavy metal contents of sewerage, canal and drinking water revealed marked differences and wide coefficient of variability (CV). Generally Cd and Pb contents were higher in sewerage than canal and drinking water. However, Cu content of drinking waters was higher than other water tested. The total solids were found to be generally higher in sewerage and canal water than drinking water tested. The total solids were found to be generally higher in sewerage and canal water than drinking water The variations in temperature, pH and EC were marginal to marked depending upon the source and the location. (author)

Lead-210 and heavy metal contents in dated ombrotrophic peat hummocks from Finland

International Nuclear Information System (INIS)

El-Daoushy, F.; Tolonen, K.

1984-01-01

Two Sphagnum fuscum hummock cores, core 1, Kaerpaensuo bog and core F9, Kunonniemensuo bog. from Finland were used in this study. The peats are ombrotrophic and were dated using the moss-increment method. The mosses in both cores were carefully examined for their botanical composition, degree of humification, ash percentage and bulk density. The total accumulated dry peat-matter in the Kunonniemensuo core was almost double that in the Kaerpaensuo core. The total 210 Pb and the supported 210 Pb were measured by isotope dilution and the radon emanation technique. Materials in the same peat samples were analysed for their 210 Pb content at the Institute of Physics, Uppsala, Sweden and the Technical Research Centre of Finland, Espoo, Finland. The annual content of unsupported 210 Pb in the dated peat-layers shows that peat materials are effective traps which could yield information on atmospheric-fluxes both chronologically and regionally. Lead, copper, zinc, iron and manganese were also measured by flame atomic absorption spectrometry (AAS). The total accumulated amounts over the past 150 y of the heavy metals investigated are almost identical for both cores apart from manganese which is considerably higher in the Kunonniemensuo core. However, the metal profiles studied exhibit discontinuity zones more pronounced in the Kunonniemensuo core. The 210 Pb data indicate that growth rate and bulk density variations in ombrotrophic peat bogs affects the accumulation of 210 Pb and similar trace metals. (orig.)

The research of a method for determination of total carbon, combination carbon and free carbon in beryllium metal

International Nuclear Information System (INIS)

Yang Xingzhong; Zhu Xiaohong

1996-02-01

A method for determination of total carbon, combination carbon and free carbon in beryllium metal with LECO CS-344 carbon/sulphur determinant has been studied. Tungsten-copper mixed pellets are used as flux to the determination of total carbon. Ratio of weight of the flux to the sample is greater than 20:1. Good analytical results are got. By this method the relative standard deviation is <10% when the content of total carbon in the range of 0.050%∼0.080% in beryllium. A standard steel sample of carbon is added into beryllium, the recoveries are 94%∼106%. For determination of free carbon, the sample are decomposed with 3 mol/L HCl, filtered and followed determination. By this method the relative standard deviation is ≤10% when the content of free carbon in the range of 0.006%∼0.020% in beryllium. the balance of total carbon and free carbon is equal to combination carbon. The method is used to determine the sample of content of total carbon in the range of 0.050%∼1.00%, free carbon in the range of 0.006%∼0.500% in metal beryllium. (6 refs., 1 fig., 13 tabs.)

Total phenolic contents and free-radical scavenging activities of grape (Vitis vinifera L.) and grape products.

Science.gov (United States)

Keser, Serhat; Celik, Sait; Turkoglu, Semra

2013-03-01

Grape is one of the world's largest fruit crops, with an approximate annual production of 58 million metric tons, and it is well known that the grape skins, seeds and stems, waste products generated during wine and grape juice processing, are rich sources of polyphenols. It contains flavonoids, phenolic acids and stilbenes. In this study, we tried to determine antioxidant properties and phenolic contents of grape and grape products (fresh fruit, seed, dried fruit, molasses, pestil, vinegar) of ethanol and water extracts. Antioxidant properties of extracts were investigated by DPPH(√), ABTS(√+), superoxide, H(2)O(2) scavenging, reducing power, metal chelating activity and determination of total phenolic contents. The seed extracts revealed highest ABTS(√+), DPPH(√), H(2)O(2) scavenging and reducing power activities. Furthermore, these extracts showed higher total phenolic contents than other grape product extracts.

Impact of the Prestige oil spill on marsh soils: Relationship between heavy metal, sulfide and total petroleum hydrocarbon contents at the Villarrube and Lires marshes (Galicia, Spain); Impacto de la marea negra del Prestige en suelos de marisma: relacion entre los contenidos de metales pesados, sulfuros e hidrocarburos en las marismas de Villarrube y Lires (Galicia, Espana)

Energy Technology Data Exchange (ETDEWEB)

Andrade, L.; Marcet, P.; Covelo, E.F.; Vega, F.A. [Department of Vegetable Biology and Soil Science, Vigo (Spain); Fernandez-Feal, L.; Fernandez-Feal, C. [Escuela Politecnica Superior, Universidad de la Coruna, Ferrol (Spain)

2004-09-15

The objectives of this study were to determine the effect of the Prestige oil spill on the total petroleum hydrocarbons and heavy metal contents of soils in two marshes (Lires and Villarrube, Galicia, Spain) and the relationship between their oxidation-reduction potential and the solubility of heavy metals with sulfide and sulfate contents. Soil samples were taken from polluted and unpolluted areas and their petroleum hydrocarbon contents, heavy metal contents and other chemical characteristics were measured. The soils affected by the oil spill show remarkable contents of Cr, Cu, Ni, Pb and V. The Lires marsh soils are more affected by fuel oil than Villarrube marsh. The effects of the contaminating agents on the soils reach distances of up to 500 m from the coastline. In the first 400 m, there are important spatial variations because the fuel oil penetrated into the soils through tidal action and not directly. The Cr, Cu, Ni, Pb and V contents of polluted soils were between 50 and 200 times higher than those of their unpolluted counterparts and the background concentrations in Galician coastal sediments. In the case of Cr, Cu, Ni, Pb and V, their origin through the fuel oil was corroborated by the high correlation (r > 0.90) between the concentrations of these metals and the total petroleum hydrocarbon content of the polluted soils, which shows the combined addition of these metals through the fuel oil. [Spanish] Los objetivos de este trabajo fueron determinar el efecto de la marea negra del buque tanque Prestige en el contenido total de hidrocarburos y de metales pesados en suelos de dos marismas (Lires y Villarrube, Galicia, Espana) y la relacion entre el potencial de oxidacion-reduccion y la solubilidad de los metales pesados con los contenidos de sulfuros y de sulfatos. Se tomaron muestras de suelos de las zonas contaminadas y no contaminadas y se determinaron diversas caracteristicas quimicas, el contenido total de hidrocarburos y de metales pesados. Los

Total and soluble oxalate content of some Indian spices.

Science.gov (United States)

Ghosh Das, Sumana; Savage, G P

2012-06-01

Spices, such as cinnamon, cloves, cardamom, garlic, ginger, cumin, coriander and turmeric are used all over the world as flavouring and colouring ingredients in Indian foods. Previous studies have shown that spices contain variable amounts of total oxalates but there are few reports of soluble oxalate contents. In this study, the total, soluble and insoluble oxalate contents of ten different spices commonly used in Indian cuisine were measured. Total oxalate content ranged from 194 (nutmeg) to 4,014 (green cardamom) mg/100 g DM, while the soluble oxalate contents ranged from 41 (nutmeg) to 3,977 (green cardamom) mg/100 g DM. Overall, the percentage of soluble oxalate content of the spices ranged from 4.7 to 99.1% of the total oxalate content which suggests that some spices present no risk to people liable to kidney stone formation, while other spices can supply significant amounts of soluble oxalates and therefore should be used in moderation.

Heavy metals content in acid mine drainage at abandoned and active mining area

Science.gov (United States)

Hatar, Hazirah; Rahim, Sahibin Abd; Razi, Wan Mohd; Sahrani, Fathul Karim

2013-11-01

This study was conducted at former Barite Mine, Tasik Chini and former iron mine Sungai Lembing in Pahang, and also active gold mine at Lubuk Mandi, Terengganu. This study was conducted to determine heavy metals content in acid mine drainage (AMD) at the study areas. Fourteen water sampling stations within the study area were chosen for this purpose. In situ water characteristic determinations were carried out for pH, electrical conductivity (EC), redox potential (ORP) and total dissolved solid (TDS) using multi parameter YSI 556. Water samples were collected and analysed in the laboratory for sulfate, total acidity and heavy metals which follow the standard methods of APHA (1999) and HACH (2003). Heavy metals in the water samples were determined directly using Inductive Coupled Plasma Mass Spectrometry (ICP-MS). Data obtained showed a highly acidic mean of pH values with pH ranged from 2.6 ± 0.3 to 3.2 ± 0.2. Mean of electrical conductivity ranged from 0.57 ± 0.25 to 1.01 ± 0.70 mS/cm. Redox potential mean ranged from 487.40 ± 13.68 to 579.9 ± 80.46 mV. Mean of total dissolved solids (TDS) in AMD ranged from 306.50 ± 125.16 to 608.14 ± 411.64 mg/L. Mean of sulfate concentration in AMD ranged from 32.33 ± 1.41 to 207.08 ± 85.06 mg/L, whereas the mean of total acidity ranged from 69.17 ± 5.89 to 205.12 ± 170.83 mgCaCO3/L. Heavy metals content in AMD is dominated by Fe, Cu, Mn and Zn with mean concentrations range from 2.16 ± 1.61 to 36.31 ± 41.02 mg/L, 0.17 ± 0.13 to 11.06 ± 2.85 mg/L, 1.12 ± 0.65 to 7.17 ± 6.05 mg/L and 0.62 ± 0.21 to 6.56 ± 4.11 mg/L, respectively. Mean concentrations of Ni, Co, As, Cd and Pb were less than 0.21, 0.51, 0.24, 0.05 and 0.45 mg/L, respectively. Significant correlation occurred between Fe and Mn, Cu, Zn, Co and Cd. Water pH correlated negatively with all the heavy metals, whereas total acidity, sulfate, total dissolved solid, and redox potential correlated positively. The concentration of heavy metals in the AMD

[Contents of total flavonoids in Rhizoma Arisaematis].

Science.gov (United States)

Du, S S; Lin, H Y; Zhou, Y X; Wei, L X

2001-06-01

Comparing the contents of total flavonoides of Rhizoma Arisaematis, which collected in different time, regions, different varieties and processed. Determining the contents by ultraviolet spectro-photometry. The contents were found in the following sequence: 1. the end of July, the begin of July, August, September; 2. Beijing, Shanxi, Sichuan, Anhui; 3. Arisaema erubenscens, A. heterophyllum, A. amurense; 4. unprocessed product, processed product.

Total arsenic, mercury, lead, and cadmium contents in edible dried seaweed in Korea.

Science.gov (United States)

Hwang, Y O; Park, S G; Park, G Y; Choi, S M; Kim, M Y

2010-01-01

Total arsenic, mercury, lead, and cadmium contents were determined in 426 samples of seaweed sold in Korea in 2007-08. The average concentrations, expressed in mg kg(-1), dry weight, were: total arsenic 17.4 (less than the limit of detection [LOD] to 88.8), Hg 0.01 (from 0.001 to 0.050), lead 0.7 (less than the LOD to 2.7), and cadmium 0.50 (less than the LOD to 2.9). There were differences in mercury, cadmium, and arsenic content in seaweed between different kinds of products and between coastal areas. The intakes of total mercury, lead, and cadmium for Korean people from seaweed were estimated to be 0.11, 0.65, and 0.45 µg kg(-1) body weight week(-1), respectively. With respect to food safety, consumption of 8.5 g day(-1) of the samples analysed could represent up to 0.2-6.7% of the respective provisional tolerable weekly intakes established by the World Health Organization (WHO). Therefore, even if Korean people have a high consumption of seaweed, this study confirms the low probability of health risks from these metals via seaweed consumption.

Selected Heavy Metals Content in Soil and Arundina graminifolia from Pelepah Kanan Mine, Kota Tinggi, Johor, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Zulfahmi Ali Rahman; Wan Mohd Razi Idris; Azman Hashim; Tukimat Lihan; Muhd Barzani Gasim; Jumaat Adam; Lim, F.N.

2009-01-01

Heavy metals composition of Cd, Co, Cr, Ni, Pb and Zn in Arundina graminifolia collected from mining area at Lombong Pelepah Kanan, Kota Tinggi, Johor were determined. The heavy metal content was also analysed in their soil substrates. The plants were separated into different portions for example root, stem and leaf and extracted for their heavy metal content by digestion method whereas the soils heavy metal content was extracted by sequential extraction. Heavy metal content in soil and plant extract was determined using the Flame Atomic Absorption Spectrophotometer. Heavy metal contents of Cd, Cr, Ni and Pb in plants were compared with their content in the control plant, whereas the Co and Zn contents were three to five folds higher. As for heavy metal content in different plant parts, it was found that Cd concentration was high in roots (2.03 mg/ kg) followed by leaf (1.67 mg/ kg) and stem (1.49 mg/ kg). Co concentration was high in leaf (9.26 mg/ kg) followed by root (9.18 mg/ kg) and stem (6.94 mg/ kg). For Cr, the concentration in decreasing sequence was root (0.46 mg/ kg) > leaf (0.19 mg/ kg) > stem (0.08 mg/ kg). Ni concentration was higher in leaf (2.78 mg/ kg) followed by root (2.71 mg/ kg) and stem (1.66 mg/ kg). Concentration in decreasing order was root (10.34 mg/ kg) > leaf (4.18 mg/ kg) > stem (3.75 mg/ kg). Zn concentration was higher in leaf (44.03 mg/ kg) followed by root (32.30 mg/ kg) and stem (13.21 mg/ kg). Total heavy metal content in soil was 2.07 - 5.59 mg/ kg, 8.72 - 39.93 mg/ kg, 1.81 - 2.14 mg/ kg, 2.66 - 6.87 mg/ kg, 23.02 - 51.56 mg/ kg and 0.64 - 2.61 mg/ kg for Ni, Zn, Cd, Pb, Co and Cr, respectively. The available fraction of heavy metals in soil was 21.9 % for Ni, 15.3 % for Zn, 49.9 % for Cd, 19.3 % for Pb, 45.7 % for Co and nil percent for Cr. Biological adsorption coefficient for the heavy metals studied was very low except for Zn where BAC value slightly higher than 1. This plant was not suitable to be used as a phyto

Assessment and genetic analysis of heavy metal content in rice grain using an Oryza sativa × O. rufipogon backcross inbred line population.

Science.gov (United States)

Huang, De-Run; Fan, Ye-Yang; Hu, Biao-Lin; Xiao, Ye-Qing; Chen, Da-Zhou; Zhuang, Jie-Yun

2018-03-01

Heavy metal accumulation in rice is a growing concern for public health. Backcross inbred lines derived from an interspecific cross of Oryza sativa × O. rufipogon were grown in two distinct ecological locations (Hangzhou and Lingshui, China). The objective of this study was to characterise the contents of heavy metal in rice grains, and to identify quantitative trait loci (QTLs) for heavy metal contents. The contents of Ni, As, Pb, Cr and Hg in milled rice showed a significant decline as compared with those in brown rice, whereas the content of Cd showed little change. The concentration of heavy metal in rice grain varied greatly between the two environments. A total of 24 QTLs responsible for heavy metal contents were detected, including two for both the brown and milled rice, 13 for brown rice only, and nine for milled rice only. All the QTLs except two had the enhancing alleles derived from O. rufipogon. Sixteen QTLs were clustered in six chromosomal regions. Environmental variation plays an important role in the heavy metal contents in rice grain. QTLs detected in this study might be useful for breeding rice varieties with low heavy metal content. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Flavonoid, hesperidine, total phenolic contents and antioxidant ...

African Journals Online (AJOL)

Additionally, the antioxidant activities were also determined by ferric reducing antioxidant power (FRAP) and 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical scavenging activity. C. hystrix had the highest flavonoid and total phenolic contents while C. aurantifolia had the highest hesperidine content. The antioxidant activity of ...

Determining Total Phenolics, Anthocyanin Content and Ascorbic Acid Content in Some Plum Genotypes Grown in Ardahan Ecological Conditions

Directory of Open Access Journals (Sweden)

Z. T. ABACI

2014-06-01

Full Text Available In this study, total phenol content, total anthocyanin content, brix, pH, titrable acidity and total ascorbic acid content in the five plum genotypes cultivated in Ardahan City are determined and sustenance of the plums are revealed. Total phenol content was determined with folin-ciocalteu’s method, total anthocyanin content was determined with pH differential method and total ascorbic acid was determined with 2,6-dichlorophenolindophenol method.It is detected that the genotype with the highest brix content (%13.9 and lowest acidity (%0.98 is cancur, the genotype with the lowest brix content (%11 and highest acidity (%2.06 is wild plum, the genotype with the highest content of total anthocyanin, total phenolic substance and ascorbic acid is the wild plum and the genotype with the least content of these is the water plum. As a result of the study, it is revealed that the plum fruit has high levels of phenolic substance, anthocyanin and ascorbic acid content, so it has a high sustenance.

Heavy metal content of tinned soup as a function of storage time

Energy Technology Data Exchange (ETDEWEB)

Stelte, W.

1983-01-01

Samples were taken from soups prior to their preservation in tins. None of the samples showed an increased content of the investigated heavy metals lead and mercury exceeding the amounts normally found in food. Thus it may be considered as certain that the heavy metal content of soups is not adversely affected by technical processes during their preparation. Increase in heavy metal content by metallic residues from tin manufacture is slight and mainly due to tin, whose content is on average increased in the soup by 0.4 mg/kg. For lead the influence is smaller and for mercury it is not significantly demonstrable. The metallic residues from tin manufacture are an irrelevant quantity in terms of nutrition physiology. Within the investigated 4-year storage-period the lead content shows a tendency to increase towards saturation. Cadmium remains essentially constant, the content of mercury has a downward tendency and reaches zero after 2 to 4 years. Consumers' exposure is in a range known for the consumption of other foodstuffs as well. The use of varnished tins to package industrial soups involves no exposure of consumers to heavy metals justifying any apprehension even after prolonged storage.

Trace metals content (contaminants) as initial indicator in the quality of heat treated palm oil whole extract

Energy Technology Data Exchange (ETDEWEB)

Mohd Fauzi, Noor Akhmazillah bt [Chemical and Bioprocess Department, Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor (Malaysia); Sarmidi, Mohd Roji [Chemical Engineering Pilot Plant, Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor (Malaysia)

2011-07-01

An investigation was carried out on the effect of different sterilization time on the trace metals concentration of palm oil whole extract. Palm fruits were collected, cleaned and sterilized for 0, 20, 40 and 60 minutes. The kernels were then stripped from the sterilized fruits to get the pulp and later the pulp was pressed using small scale expeller. The resulting puree was centrifuge at 4000 rpm for 20 minutes. The palm oil whole extract were then collected and trace metals analysis was conducted using Inductively Couple Plasma-Mass Spectrometry (ICP-MS). The result showed that the highest yield was obtained at 40 minutes of sterilization with 19.9 {+-} 0.21 % (w/w). There was no significant different (p < 0.5) in total trace metals content between the degrees of the heat treatment. Na+ was found as the highest trace metals content in the extract with mean concentration ranging from 1.05 {+-} 0.03 ppm to 2.36 {+-} 0.01 ppm. 40 minutes of heating time was predicted to have good oil quality due to higher content in trace metals that inhibit the lipase enzyme activity.

Classification of Plants According to Their Heavy Metal Content ...

African Journals Online (AJOL)

Plants like other living organisms respond differently under different environmental conditions. An elevated level of heavy metals is one of the stresses which results into three classes of plants depending on their heavy metal content. The classes of plant species according to their accumulated heavy metals around North ...

[Determination of total mass and morphology analysis of heavy metal in soil with potassium biphthalate-sodium hydroxide by ICP-AES].

Science.gov (United States)

Qu, Jiao; Yuan, Xing; Cong, Qiao; Wang, Shuang

2008-11-01

Blank soil was used as quality controlling samples, soil sample dealt by potassium biphthalate-sodium hydroxide buffer solution was used as check sample, mixed acid HNO3-HF-HClO4 was chosen to nitrify soil samples, and plasma emission spectrometer (ICP-AES) was used as detecting method. The authors determined the total metal mass of Mo, Pb, As, Hg, Cr, Cd, Zn, Cu and Ni in the extracted and dealt soil samples, and determined the mass of Mo, Pb, As, Hg, Cr, Cd, Zn, Cu and Ni in the three chemical morphologies, including acid extractable morphology, oxide associated morphology, and organics associated modality. The experimental results indicated that the different pH of potassium biphthalate-sodium hydroxide buffer solution had obvious influence on the total mass of heavy metal and morphology transformation. Except for metal element Pb and Zn, the addition of different pH potassium dihydrogen phosphate-sodium hydroxide buffer solution could accelerate the soil samples nitrification and the total mass determination of heavy metal in the soil samples. The potassium biphthalate-sodium hydroxide buffer solution could facilitate the acid extractable morphology of Cr, Cu, Hg and Pb, oxidation associated morphology of As, Hg, Pb and Zn and the organic associated morphology transforming of As and Hg. At pH 5.8, the maximum acid extractable morphology contents of Cu and Hg were 2.180 and 0.632 mg x kg(-1), respectively; at pH 6.2, the maximal oxidation associated morphology content of Pb could achieve 27.792 mg x kg(-1); at pH 6.0, the maximum organic associated morphology content of heavy metal Hg was 4.715 mg x kg(-1).

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

International Nuclear Information System (INIS)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte

2016-01-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

Energy Technology Data Exchange (ETDEWEB)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte, E-mail: b.helmreich@tum.de

2016-08-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples.

Subcellular partitioning of metals in Aporrectodea caliginosa along a gradient of metal exposure in 31 field-contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Beaumelle, Léa [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France); Gimbert, Frédéric [Laboratoire Chrono-Environnement, UMR 6249 University of Franche-Comté/CNRS Usc INRA, 16 route de Gray, 25030 Besançon Cedex (France); Hedde, Mickaël [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France); Guérin, Annie [INRA, US 0010 LAS Laboratoire d' analyses des sols, 273 rue de Cambrai, 62000 Arras (France); Lamy, Isabelle, E-mail: lamy@versailles.inra.fr [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France)

2015-07-01

Subcellular fractionation of metals in organisms was proposed as a better way to characterize metal bioaccumulation. Here we report the impact of a laboratory exposure to a wide range of field-metal contaminated soils on the subcellular partitioning of metals in the earthworm Aporrectodea caliginosa. Soils moderately contaminated were chosen to create a gradient of soil metal availability; covering ranges of both soil metal contents and of several soil parameters. Following exposure, Cd, Pb and Zn concentrations were determined both in total earthworm body and in three subcellular compartments: cytosolic, granular and debris fractions. Three distinct proxies of soil metal availability were investigated: CaCl{sub 2}-extractable content dissolved content predicted by a semi-mechanistic model and free ion concentration predicted by a geochemical speciation model. Subcellular partitionings of Cd and Pb were modified along the gradient of metal exposure, while stable Zn partitioning reflected regulation processes. Cd subcellular distribution responded more strongly to increasing soil Cd concentration than the total internal content, when Pb subcellular distribution and total internal content were similarly affected. Free ion concentrations were better descriptors of Cd and Pb subcellular distribution than CaCl{sub 2} extractable and dissolved metal concentrations. However, free ion concentrations and soil total metal contents were equivalent descriptors of the subcellular partitioning of Cd and Pb because they were highly correlated. Considering lowly contaminated soils, our results raise the question of the added value of three proxies of metal availability compared to soil total metal content in the assessment of metal bioavailability to earthworm. - Highlights: • Earthworms were exposed to a wide panel of historically contaminated soils • Subcellular partitioning of Cd, Pb and Zn was investigated in earthworms • Three proxies of soil metal availability were

[Relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii].

Science.gov (United States)

Zhu, Hua; Teng, Jianbei; Cai, Yi; Liang, Jie; Zhu, Yilin; Wei, Tao

2011-12-01

To find out the relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii. Microscopy-counting process was applied to starch quantity statistics, sulfuric acid-anthrone colorimetry was used to assay polysaccharides content and bromocresol green colorimetry was used to assay alkaloid content. Pearson product moment correlation analysis, Kendall's rank correlation analysis and Spearman's concordance coefficient analysis were applied to study their relativity. Extremely significant positive correlation was found between starch quantity and polysaccharides content, and significant negative correlation between alkaloid content and starch quantity was discovered, as well was between alkaloid content and polysaccharides content.

78 FR 63517 - Control of Ferrite Content in Stainless Steel Weld Metal

Science.gov (United States)

2013-10-24

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0231] Control of Ferrite Content in Stainless Steel Weld... Ferrite Content in Stainless Steel Weld Metal.'' This guide (Revision 4) describes a method that the NRC staff considers acceptable for controlling ferrite content in stainless steel weld metal. It updates the...

US-Total Electron Content Product (USTEC)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The US Total Electron Content (US-TEC) product is designed to specify TEC over the Continental US (CONUS) in near real-time. The product uses a Kalman Filter data...

THE STUDIES OF METAL CONTENT IN PRECIPITATION WATER IN LUBELSKIE AND LUBUSKIE VOIVODESHIPS IN 2013

Directory of Open Access Journals (Sweden)

Agnieszka Malec

2015-09-01

Full Text Available This paper presents the results of the studies of metal content in precipitation water in 2013, recorded at measuring points within Lubelskie and Lubuskie Voivodeships. It provides a detailed description of the method of collecting and analysing water samples in respect of light- and heavy-metal determination. Based on the results, a general assessment was made of the condition of the environment in the areas in question. Also, the sources of pollution in wet precipitation, and the effects of their introduction into the environment, were determined. It was found that the main pollution elements of precipitation water were linked to anthropogenic sources. The study also established that precipitation water, especially in the sparsely industrialised Włodawa region in the Lubelskie Voivodeship, had generally low pollution levels. It was also noted that in 2013, due to low total precipitation, the environmental impact of metal content was lower than in the preceding years.

Heavy metals content in plant-growing products as the results of agroecological monitoring

International Nuclear Information System (INIS)

Kuznetsov, A.V.; Lunev, M.I.; Pavlikhina, A.V.; Lobas, N.V.

2008-01-01

The generalised data on the heavy metals and arsenic contents in grain and vegetable cultures, green mass and hay of various grasses are presented. The dependence of heavy metal accumulation factors in plant-growing products on soil properties is shown. The estimation of levels of the heavy metals contents in accordance with the admissible content standards is given.

Total and Available Heavy Metal Concentrations and Assessment of Soil Pollution Indices in Selected Soils of Zanjan

Directory of Open Access Journals (Sweden)

M. Taheri

2017-01-01

Full Text Available Introduction: Soil is a hardly renewable natural resource. Although soil degradation, caused by either human activities and natural processes is a relatively slow procedure, but its effects are long lasting and most often, irreversible in the time scale of man's life. Among the most significant soil contaminants resulting from both natural and human sources, heavy metals are more important due to their long- term toxicity effects. For evaluating soil's enrichment rate by heavy metals, a wide and full study of soils background values, including total and available fractions of heavy metal contents should be done. Zanjan province has some great mines and concentrating industries of lead and zinc especially in Angoran, Mahneshan. Unfortunately produced waste materials of these industries spread over the adjacent areas. Investigations showed that accumulation of some heavy metals in vegetables and crops planted in this region had occurred. Therefore, performing some investigations in these polluted areas and assessing pollution rate and heavy metals distribution in arable lands had prime importance. Our goals were: 1 determining the total and available amounts of Cu, Pb, Zn and Cd in the soils of arable lands in polluted areas of Zanjan city, 2 producing the distribution map for the metals mentioned above and 3 calculating pollution indices in the soils. Materials and Methods: The study area was in south west of Zanjan city. For soil sampling, a 1 Km by 1 Km grid defined in ArcGIS software on landuse layer and totally 144 points that placed on agricultural lands, due to our goals, were sampled. For sampling, in a 5m radius around the point we collected some subsamples from depth of 0 - 15 cm, and after mixing the subsamples, finally a 1Kg soil sample prepared and sent to the laboratory. Sampled soils were air dried and were passed through a 2mm sieve. Soils organic matter (OM content and texture were determined by Walkely-Black and Bouyoucos

Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh

Directory of Open Access Journals (Sweden)

Nandita Sarker

2015-01-01

Full Text Available The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC, and ash, moisture, and total sugar content of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum, mustard (Brassica juncea, and litchi (Litchi chinensis honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.

Adsorption of acid-extractable organics from oil sands process-affected water onto biomass-based biochar: Metal content matters.

Science.gov (United States)

Bhuiyan, Tazul I; Tak, Jin K; Sessarego, Sebastian; Harfield, Don; Hill, Josephine M

2017-02-01

The impact of biochar properties on acid-extractable organics (AEO) adsorption from oil sands process-affected water (OSPW) was studied. Biochar from wheat straw with the highest ash content (14%) had the highest adsorption capacity (0.59 mg/g) followed by biochar from pulp mill sludge, switchgrass, mountain pine, hemp shives, and aspen wood. The adsorption capacity had no obvious trend with surface area, total pore volume, bulk polarity and aromaticity. The large impact of metal content was consistent with the carboxylates (i.e., naphthenate species) in the OSPW binding to the metals (mainly Al and Fe) on the carbon substrate. Although the capacity of biochar is still approximately two orders of magnitude lower than that of a commercial activated carbon, confirming the property (i.e., metal content) that most influenced AEO adsorption, may allow biochar to become competitive with activated carbon after normalizing for cost, especially if this cost includes environmental impacts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Phytochemical, Proximate and Metal Content Analysis of the Leaves ...

African Journals Online (AJOL)

Methods: The phytochemical analysis of Psidium guajava was carried out by using a standard procedure. Ash, fat, protein, carbohydrate and fibre contents were determined using proximate analysis while the metal contents were determined using Pearson's method. Results: The phytochemical analysis revealed the ...

Calcium availability but not its content modulates metal toxicity in Scenedesmus quadricauda.

Science.gov (United States)

Kováčik, Jozef; Dresler, Sławomir

2018-01-01

Impact of calcium nutrition (pre-culture on solid medium with standard or elevated Ca dose, i. e. 0.17 and 4.40mM marked as low and high Ca) on acute metal toxicity (Cd, Mn and Pb, 24h of exposure to 10µM) in freshwater green alga Scenedesmus quadricauda was studied. Surprisingly, Ca content differed only slightly between low and high Ca samples and applied metals rather suppressed its amount. Na content was higher in metal-exposed high Ca samples, indicating that Ca/Na ratio may affect accumulation of metals. Content of heavy metals increased in order Cd < Mn < Pb and high Ca samples contained less metal than low Ca samples at least in absorbed fraction. Accumulation of ascorbic acid and thiols (GSH - glutathione and PC2 - phytochelatin 2) was affected mainly by Cd, GSH also by Mn and PC2 by Pb with often significant differences between low Ca and high Ca samples. Calcium nutrition also affected responses of algae to metals at the level of antioxidative enzyme activities (SOD, APX, and CAT) and elevated values were typically found in high Ca samples while ROS (hydrogen peroxide and superoxide radical) were mainly depleted in Mn treatment. These data confirm that Ca nutrition affects accumulation of metals in algae and metabolic parameters as observed in vascular plants but, unlike them, rather Ca/Na ratio than absolute Ca content seems to regulate the uptake of metals. Copyright © 2017 Elsevier Inc. All rights reserved.

Total concentration and speciation of heavy metals in biosolids from urban origin; Concentracion total y especiacion de metales pesados en biosolidos de origen urbano origin

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Flores, Eduardo [Laboratorio de Ingenieria Ambiental, Instituto Tecnologico de Puebla, Puebla, Puebla (Mexico)]. E-mail: egonz1962@yahoo.com.mx; Tornero Campante, Mario Alberto [Colegio de Postgraduados - Campus Puebla, San Pedro Cholula, Puebla (Mexico); Angeles Cruz, Yolanda [Laboratorio de Ingenieria Ambiental, Instituto Tecnologico de Puebla, Puebla, Puebla (Mexico); Bonilla y Fernandez, Noemi [Departamento de Agroecologia y Ambiente, Instituto de Ciencias - Benemerita Universidad Autonoma de Puebla, Puebla, Puebla (Mexico)

2009-02-15

The analysis of heavy metals is a very important task to asses the potential environmental and health risk associated with biosolids deposition in agricultural soil. However, it is widely accepted that determination of total concentration of heavy metals does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply speciation studies to obtain suitable information about their bioavailability. This study was carried out on sewage sludge samples collected in a municipal waste-water treatment plant, located in Puebla City (Mexico). They are used for amendment agricultural soil. The speciation of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) was made using a sequential extraction procedure. The aim was to determine their concentration in bioavailability fractions. It was got the total concentration of heavy metals using acid digestion in a closed system and was determined with atomic absorption spectrometry. The total concentrations of heavy metals were lower than that established by Mexican legislation. The heavy metals are mainly associated with the mineral fraction and organic matter and consequently they show low bioavailability. [Spanish] El analisis de metales pesados es una actividad importante cuando se quiere valorar el potencial riesgo ambiental y de salud asociado con la utilizacion de biosolidos en suelos agricolas. Sin embargo, es ampliamente aceptado que la determinacion del contenido total no da una valoracion apropiada del impacto ambiental causado. Por lo tanto, es necesario realizar estudios de especiacion para obtener informacion mas detallada sobre su biodisponibilidad. Este estudio se llevo a cabo con muestras de lodos residuales producidos en una planta de tratamiento de aguas residuales ubicada en la ciudad de Puebla (Mexico). Estos biosolidos son utilizados para enmendar suelos agricolas. La especiacion de metales pesados (Cd, Cr, Cu, Ni, Pb y Zn) se realizo usando un procedimiento de extraccion secuencial

Determination of heavy metal content and physico-chemical properties of soils in the vicinity of Tasik Chini, Pahang

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Muhd Barzani Gasim; Mohd Nizam Mohd Said; Wan Mohd Razi Idris; Azman Hashim; Sharilnizam Yusof; Masniyana Jamil

2008-01-01

This study was carried out to determine heavy metal content and physico-chemical properties of soils influencing heavy metal accumulation in some series surrounding the Chini Lakes. A total of 15 topsoil sample were collected randomly from 6 stations. The physical properties that were analyzed include particle size distribution and soil organic matter. Meanwhile, the chemical characteristics determined were pH, electrical conductivity and cation exchange capacity. It was found that heavy metal content of Cd, Cr, Cu, Co, Pb, Zn and Mn were low whereas Fe content was high. The textures of soil studied were clay, loamy sand, sandy loam, clay loam and silty clay loam. The mean of organic matter ranged from 2.68 to 11.46 %. The soil pH showed that the soil studied was acidic with values ranged between 3.36 to 3.72. The range of electrical conductivity mean was between 2150 μScm -1 to 2403 μScm -1 . Cation exchange capacity mean ranged from 2.85 until 8.59 cmol/ kg. Correlation analysis showed that there were positive and negative significant correlations between soils parameters heavy metal concentration. Analysis of variance (ANOVA) showed that there were significant differences in organic matter percentage, pH, cation exchange capacity and heavy metals except cadmium between sampling station. (author)

Interspecific variation in total phenolic content in temperate brown algae

Directory of Open Access Journals (Sweden)

Anna Maria Mannino

2017-09-01

Full Text Available Marine algae synthesize secondary metabolites such as polyphenols that function as defense and protection mechanisms. Among brown algae, Fucales and Dictyotales (Phaeophyceae contain the highest levels of phenolic compounds, mainly phlorotannins, that play multiple roles. Four temperate brown algae (Cystoseira amentacea, Cystoseira compressa, Dictyopteris polypodioides and Padina pavonica were studied for total phenolic contents. Total phenolic content was determined colorimetrically with the Folin-Ciocalteu reagent. Significant differences in total phenolic content were observed between leathery and sheetlike algae and also within each morphological group. Among the four species, the sheet-like alga D. polypodioides, living in the upper infralittoral zone, showed the highest concentration of phenolic compounds. These results are in agreement with the hypothesis that total phenolic content in temperate brown algae is influenced by a combination of several factors, such as growth form, depth, and exposition to solar radiation.

Heavy metal content (Cd, Ni, Cr and Pb) in soil amendment with a low polluted biosolid

Science.gov (United States)

Gomez Lucas, Ignacio; Lag Brotons, Alfonso; Navarro-Pedreño, Jose; Belén Almendro-Candel, Maria; Jordán, Manuel M.; Bech, Jaume; Roca, Nuria

2016-04-01

The progressively higher water quality standards in Europe has led to the generation of large quantities of sewage sludge derived from wastewater treatment (Fytili and Zabaniotou 2008). Composting is an effective method to minimize these risks, as pathogens are biodegraded and heavy metals are stabilized as a result of organic matter transformations (Barker and Bryson 2002; Noble and Roberts 2004). Most of the studies about sewage sludge pollution are centred in medium and high polluted wastes. However, the aim of this study was to assess the effects on soil heavy metal content of a low polluted sewage sludge compost in order to identify an optimal application rate based in heavy metal concentration under a period of cultivation of a Mediterranean horticultural plant (Cynara carducnculus). The experiment was done between January to June: rainfall was 71 mm, the volume of water supplied every week was 10.5 mm, mean air temperatures was 14.2, 20.4 (maximum), and 9.2◦C (minimum). The soil was a clay-loam anthrosol (WRB 2006). The experimental plot (60 m2) was divided into five subplots with five treatments corresponding to 0, 2, 4, 6, and 8 kg compost/m2. Three top-soil (first 20 cm) samples from each treatment were taken (January, April and June) and these parameters were analysed: pH, electrical conductivity, organic matter and total content of heavy metals (microwave acid digestion followed by AAS-spectrometry determination). The results show that sewage sludge compost treatments increase the organic matter content and salinity (electrical conductivity of the soils) and diminish the pH. Cd and Ni total content in top-soil was affected and both slightly reduce their concentration. Pb and Cr show minor changes. In general, the application of this low polluted compost may affect the mobility of Cd and Ni due to the pH modification and the water added by irrigation along time but Pb and Cr remain their content in the top-soil. References Barker, A.V., and G.M. Bryson

metal content determination of some sexual dysfunction medicine

African Journals Online (AJOL)

userpc

METAL CONTENT DETERMINATION OF SOME SEXUAL DYSFUNCTION. MEDICINE ... motivation for sexual desire, functioning and response .... generated and optimization of the equipment ... by the users' have to be moderate otherwise it.

Comparison of total phenolic content and composition of individual ...

African Journals Online (AJOL)

A successful peanut breeding to obtain genotypes with greater phenolic content requires information on type and content of phenolic compounds in parental peanut genotypes. The aim of this study was to investigate the total phenolic contents and phenolic acid profiles of 15 Valencia-type peanut genotypes both in peanut ...

Acetabular bone density and metal ions after metal-on-metal versus metal-on-polyethylene total hip arthroplasty; short-term results

NARCIS (Netherlands)

Zijlstra, Wierd P.; van der Veen, Hugo C.; van den Akker-Scheek, Inge; Zee, Mark J. M.; Bulstra, Sjoerd K.; van Raay, Jos J. A. M.

Information on periprosthetic acetabular bone density is lacking for metal-on-metal total hip arthroplasties. These bearings use cobalt-chromium instead of titanium acetabular components, which could lead to stress shielding and hence periprosthetic bone loss. Cobalt and chromium ions have

A REVIEW ON HEAVY METALS CONTENTS IN HIDE, SKIN AND PROCESSED LEATHERS

Directory of Open Access Journals (Sweden)

KOIZHAIGANOVA Meruyert

2016-05-01

Full Text Available Heavy metals are metals with high atomic weight which can be deposited in soil, water, plants and animals. It is generally known that mammal tissues are good bioindicators of trace elements, including heavy metals. Heavy metal analysis serves to identify and quantify the elements that are a potential hazard to the consumer after varying levels of contact. Usage area of leather is increasingly expanding in these days and it has also become a material requested and demanded by effect of fashion. Leather must protect its appearance and physical stability and also be problem-free in ecological terms and harmless to human health. There is a lack of data concerning the content of toxic elements in raw hide and skin of animals. Mainly information concerning metals content, including toxic ones, in processed leathers may be found in the literature. The aim of the present study was to review and compare the content of some heavy metals in raw hide, skin and the processed leathers in order to evaluate their accumulation and transition to the end-up product.

Estimation of Total Body Fat from Potassium-40 Content

International Nuclear Information System (INIS)

Taha Mohamed Taha Ahmed, T.M.T.

2010-01-01

This paper concerns on estimation of total body fat from potassium 40 content using total body counting technique. The work performed using fast scan whole body counter. Calibration of that system for K-40 was carried out under assumption that uniformity distribution of radioactivity of potassium was distributed in 10 polyethylene bottles phantom. Different body sizes were represented by 2, 4, 6, 8 and 10 polyethylene bottles; each bottle has a volume of 0.04 m3. The counting efficiency for each body size was determined. Lean body weight (LBW) was calculated for ten males and ten females using appropriate mathematical equation. Total Body Potassium, TBK for the same selected group was measured using whole body counter. A mathematical relationship between lean body weight and potassium content was deduced .Fat contents for some individuals were calculated and weight/height ratio was indicated for fatness.

Heavy Metal Contents in Some Commonly Consumed Vegetables

African Journals Online (AJOL)

dell

This work reports on the levels of cadmium, lead, copper, manganese and ... source of both heavy metals and essential trace elements due to their ... content, clay mineral and other soil chemical ... addition, the interactions of soil-plant root-.

Relationship between metal speciation in soil solution and metal adsorption at the root surface of ryegrass

NARCIS (Netherlands)

Kalis, E.J.J.; Temminghoff, E.J.M.; Town, R.M.; Unsworth, E.R.; Riemsdijk, van W.H.

2008-01-01

Received for publication October 12, 2007. The total metal content of the soil or total metal concentration in the soil solution is not always a good indicator for metal availability to plants. Therefore, several speciation techniques have been developed that measure a defined fraction of the total

Phytochemical screening, total phenolic, total flavonoids contents and antioxidant activity of cinchona ledgeriana leaves ethanol extract

Science.gov (United States)

Sundowo, Andini; Artanti, Nina; Hanafi, M.; Minarti, Primahana, Gian

2017-11-01

C ledgeriana is a medicinal plant that contains alkaloids, especially on the barks for commercial production of quinine as antimalarial. The main alkaloids in this plant are cinchonine, cinchonidine, quinine and quinidine. Besides for antiamalarial this plant is also commonly used to treat whooping cough, influenza and dysentery. Compare to other medicinal plants, nowadays only very few studies were conducted in Cinchona species. Our current study aims to determine the content of phytochemical, total phenol and total flavonoids from C. ledgeriana leaves 70% ethanol extract. The extraction was performed by maceration method using 70% ethanol solvent and then fractionated into hexane, ethylacetate and butanol. Phytochemical screening was performed to determine the content of alkaloids, flavonoids, terpenoids, tannins and saponins. Total phenol and flavonoid contents of the extract were determined by Folin-Ciocalteu and alumunium chloride colorimetric methods using gallic acid and quercetin as standards. The antioxidant activity was determined by using 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity. The results of phytochemical screening showed that the 70% ethanol extract of C. ledgeriana leaves contained alkaloids, flavonoids, terpenoids, tannins and saponins. The total phenol and total flavonoids analysis showed that ethyl acetate fraction had the highest total phenol (40.23%) and total flavonoids (65.34%).

Metal-on-Metal Total Hip Resurfacing Arthroplasty

Science.gov (United States)

2006-01-01

Executive Summary Objective The objective of this review was to assess the safety and effectiveness of metal on metal (MOM) hip resurfacing arthroplasty for young patients compared with that of total hip replacement (THR) in the same population. Clinical Need Total hip replacement has proved to be very effective for late middle-aged and elderly patients with severe degenerative diseases of the hips. As indications for THR began to include younger patients and those with a more active life style, the longevity of the implant became a concern. Evidence suggests that these patients experience relatively higher rates of early implant failure and the need for revision. The Swedish hip registry, for example, has demonstrated a survival rate in excess of 80% at 20 years for those aged over 65 years, whereas this figure was 33% by 16 years in those aged under 55 years. Hip resurfacing arthroplasty is a bone-conserving alternative to THR that restores normal joint biomechanics and load transfer. The technique has been used around the world for more than 10 years, specifically in the United Kingdom and other European countries. The Technology Metal-on-metal hip resurfacing arthroplasty is an alternative procedure to conventional THR in younger patients. Hip resurfacing arthroplasty is less invasive than THR and addresses the problem of preserving femoral bone stock at the initial operation. This means that future hip revisions are possible with THR if the initial MOM arthroplasty becomes less effective with time in these younger patients. The procedure involves the removal and replacement of the surface of the femoral head with a hollow metal hemisphere, which fits into a metal acetabular cup. Hip resurfacing arthroplasty is a technically more demanding procedure than is conventional THR. In hip resurfacing, the femoral head is retained, which makes it much more difficult to access the acetabular cup. However, hip resurfacing arthroplasty has several advantages over a

The Effect of Organism Size on the Content of Certain Trace Metals in Marine Zooplancton

International Nuclear Information System (INIS)

Fowler, S.W.

1976-01-01

Individual species of euphausiids and pelagic shrimp, collected at the same time and place, were sorted into different size groups and analyzed for several biologically important trace metals by atomic absorption spectrophotometry and neutron activation. Other specimens from these samples were dissected into gross anatomical parts and analyzed in the same way. Molts collected from zooplankters maintained live in the laboratory were also analyzed for metals. Results for the different size-group experiments showed that in general the concentrations of zinc, iron, and manganese were inversely correlated with dry body weight. Depending upon the crustacean species, metal concentrations in smaller individuals ranged from 1.2 to 4.1 times greater than those in larger individuals of the same species. Copper concentration on the other hand, tended to be a direct function of dry weight. Concentrations of zinc, iron, and manganese were generally higher in molts and dissected exoskeletons than in muscle tissue, however, the opposite was true for copper. The amount of material shed by euphausiids in molting ranged from 4.7 to 10.9% of dry body weight with smaller animals tending to lose a greater percentage of body weight than the larger specimens. These molts, in which ash accounted for about 40-50% of the dry weight, contained 15-20, 19-45, 28-40, and 15% of the total body zinc, iron, cobalt and manganese, respectively. Only 5% of the total body copper content was associated with the molt. In addition, molts from smaller crustaceans had higher concentrations of zinc and iron than those from larger species. With the exception of copper, it appears that a relatively large fraction of the animal's metal content is associated with the older inert chitin, indicating that much of the trace metal measured in small planktonic crustaceans is merely sorbed to the surface and is not physiologically necessary. In an ecological sense, the rapid molting frequency of these Crustacea

Fatal Cobalt Toxicity after a Non-Metal-on-Metal Total Hip Arthroplasty

Directory of Open Access Journals (Sweden)

Rinne M. Peters

2017-01-01

Full Text Available This case illustrates the potential for systemic cobalt toxicity in non-metal-on-metal bearings and its potentially devastating consequences. We present a 71-year-old male with grinding sensations in his right hip following ceramic-on-ceramic total hip arthroplasty (THA. After diagnosing a fractured ceramic liner, the hip prosthesis was revised into a metal-on-polyethylene bearing. At one year postoperatively, X-rays and MARS-MRI showed a fixed reversed hybrid THA, with periarticular densities, flattening of the femoral head component, and a pattern of periarticular metal wear debris and pseudotumor formation. Before revision could take place, the patient was admitted with the clinical picture of systemic cobalt toxicity, supported by excessively high serum cobalt and chromium levels, and ultimately died. At autopsy dilated cardiomyopathy as cause of death was hypothesized. A third body wear reaction between ceramic remnants and the metal femoral head very likely led to excessive metal wear, which contributed systemic cobalt toxicity leading to neurotoxicity and heart failure. This case emphasizes that fractured ceramic-on-ceramic bearings should be revised to ceramic-on-ceramic or ceramic-on-polyethylene bearings, but not to metal-on-polyethylene bearings. We aim to increase awareness among orthopedic surgeons for clinical clues for systemic cobalt intoxication, even when there is no metal-on-metal bearing surface.

Minerals and Total Polyphenolic Content of Some Vegetal Powders

Directory of Open Access Journals (Sweden)

Roxana E. TUFEANU

2017-11-01

Full Text Available The total polyphenolic content and minerals were determined for chia seeds, Psyllium husks and watermelon rind powder. The minerals content was performed by using the Inductively Coupled Plasma Optical Emissions Spectrometer and Atomic Absorption Spectrometer, technique FIAS-Furnace (for Se. The sample with the highest content of polyphenols was chia (2.69 mg GAE/g s. followed by the watermelon rind powder. Reduced amounts of polyphenols were found in the Psyllium husks. Also, the total polyphenol concentration increased with the increase of the extraction time on the ultrasonic water bath. Minerals analysis indicated that powders obtained from chia seeds and watermelon rind contained large amounts of potassium, calcium, phosphorus and magnesium. The most abundant mineral in the Psyllium husks powder was found potassium, followed by calcium. In conclusion, these powders can be used as ingredients for functional food and food supplements production due to the high nutritional content and bioactive properties.

HEAVY METAL CONTENT OF AYURVEDIC HERBAL MEDICINE PRODUCTS

Science.gov (United States)

Case reports of individuals taking Ayurvedic herbal medicine products (HMPs) suggest that they may contain lead, mercury, and/or arsenic. We analyzed the heavy metal content of Ayurvedic HMPs manufactured in India and Pakistan, available in South Asian grocery stores in the Bost...

Heavy Metal Content in Terraced Rice Fields at Sruwen Tengaran Semarang - Indonesia

Science.gov (United States)

Hindarwati, Yulis; Soeprobowati, Tri Retnaningsih; Sudarno

2018-02-01

The presence of heavy metal on agricultural soils can be caused not only natural factors but also due to human intervention. Differences in management and lack of understanding of farmers in the production input of fertilizers and pesticides ensued in land ravaged. Periodic testing of paddy fields is necessary to minimize the contaminants from being absorbed by plants that will have an impact on health decline. The purpose of the assessment was to identify the heavy metal content in the terraced rice field in Sruwen Village, Tengaran District, Semarang Regency. Survey was conducted in February 2017. Sampling on terraced rice fields of different heights consisted of upper, middle, and upper down. Taken as many as eight single points and composed at a depth of 0-20 cm and 20-40 cm. The identification results showed that heavy metal content of Pb, Cd, and Cu were present at all altitudes. Heavy Metals Pb and Cd at a depth of 0-20 cm were higher from 20-40 cm in the upper and lower rice fields but lower in the middle rice field. Cu heavy metal at a depth of 0-20 cm was higher than 20-40 cm in all altitude land. The heavy metal content of Pb, Cd, and Cu was still below the heavy metal standard set by the European Union and India.

Comparative total phenolic content, anti-lipase and antioxidant ...

African Journals Online (AJOL)

Total phenol values are expressed in terms of Gallic acid equivalent (w/w of dry mass). Aframomum melegueta exhibited the highest phenolic content of 60.4 ± 2.36 mgGAE/g, a percentage antioxidant activity of 86.6 % at 200μg/ml and percentage lipase inhibition of 89% at 1mg/ml while Aframomum danielli revealed a total ...

Chlorophyll meter reading and total nitrogen content applied as ...

African Journals Online (AJOL)

Ana Mascarello

The present study was aimed to assess the relationship between the reading of the chlorophyll meter and the total nitrogen (N) content ... devices to measure chlorophyll index (SPAD) and N content in the leaf. The nitrogen levels were found ... absorption of other nutrients and the production of carbohydrates. The methods ...

Red cabbage yield, heavy metal content, water use and soil chemical characteristics under wastewater irrigation.

Science.gov (United States)

Tunc, Talip; Sahin, Ustun

2016-04-01

The objective of this 2-year field study was to evaluate the effects of drip irrigation with urban wastewaters reclaimed using primary (filtration) and secondary (filtration and aeration) processes on red cabbage growth and fresh yield, heavy metal content, water use and efficiency and soil chemical properties. Filtered wastewater (WW1), filtered and aerated wastewater (WW2), freshwater and filtered wastewater mix (1:1 by volume) (WW3) and freshwater (FW) were investigated as irrigation water treatments. Crop evapotranspiration decreased significantly, while water use efficiency increased under wastewater treatments compared to FW. WW1 treatment had the lowest value (474.2 mm), while FW treatments had the highest value (556.7 mm). The highest water use efficiency was found in the WW1 treatment as 8.41 kg m(-3), and there was a twofold increase with regard to the FW. Wastewater irrigation increased soil fertility and therefore red cabbage yield. WW2 treatment produced the highest total fresh yield (40.02 Mg ha(-1)). However, wastewater irrigation increased the heavy metal content in crops and soil. Cd content in red cabbage heads was above the safe limit, and WW1 treatment had the highest value (0.168 mg kg(-1)). WW3 treatment among wastewater treatments is less risky in terms of soil and crop heavy metal pollution and faecal coliform contamination. Therefore, WW3 wastewater irrigation for red cabbage could be recommended for higher yield and water efficiency with regard to freshwater irrigation.

Early results of metal on metal articulation total hip arthroplasty in young patients.

Science.gov (United States)

Mohamad, J A; Kwan, M K; Merican, A M; Abbas, A A; Kamari, Z H; Hisa, M K; Ismail, Z; Idrus, R M

2004-12-01

We report our early experience of 20 cases of metal on metal articulation total hip arthroplasty in 19 young patients. Avascular necrosis of the femoral head (63%) was the commonest diagnosis for patients undergoing this procedure, followed by osteoarthritis (21%). In general, most of the patients were young and physically active with an average age of 43.1 years (range, 25 to 58 years). The average follow-up period was 18 months (range, 7 to 46 months). The mean total Harris Hip Score preoperatively and at final follow-up was 31 points and 89 points respectively. The mean total Pain Score improved from an average of 11.5 to 41.1 points at final follow-up. Sixteen (84%) of the patients had a good to excellent hip score. There was one dislocation, which stabilized after reduction and conservative management. One case of early infection underwent a two-staged revision.

[Seasonal changes and response to stress of total flavonoids content of Farfugium japonicum].

Science.gov (United States)

Cui, Dalian; Ma, Yuxin

2013-05-01

To investigate the seasonal variation of total flavonoid content of Farfugium japonicum and its response to stress. The total flavonoids of Farfugium japonicum were determined by spectrophotometry in different seasons and under various stressful factors. The total flavonoid content in Farfugium japonicum leaves was the highest, followed by the petiole, and rhizomes (Pseasons (Pwater stress, the total flavonoid content in Farfugium japonicum leaves gradually increased, that in petiole first increased and then decreased,while that in rhizomes decreased (Pstress, the total flavonoid content in leaves, petioles and rhizomes of Farfugium japonicum showed a decreasing trend (Pseasons and that in different parts of the plant has different responses to ecological stressful factors.

CAMEX-4 DC-8 NEVZOROV TOTAL CONDENSED WATER CONTENT SENSOR V1

Data.gov (United States)

National Aeronautics and Space Administration — The CAMEX-4 DC-8 Nevzorov Total Condensed Water Content Sensor dataset was collected by the Nevzorov total condensed water content sensor which was used to measure...

Changes in fatty acid content and composition between wild type and CsHMA3 overexpressing Camelina sativa under heavy-metal stress.

Science.gov (United States)

Park, Won; Feng, Yufeng; Kim, Hyojin; Suh, Mi Chung; Ahn, Sung-Ju

2015-09-01

Under heavy-metal stress, CsHMA3 overexpressing transgenic Camelina plants displayed not only a better quality, but also a higher quantity of unsaturated fatty acids in their seeds compared with wild type. Camelina sativa L. belongs to the Brassicaceae family and is frequently used as a natural vegetable oil source, as its seeds contain a high content of fatty acids. In this study, we observed that, when subjected to heavy metals (Cd, Co, Zn and Pb), the seeds of CsHMA3 (Heavy-Metal P1B-ATPase 3) transgenic lines retained their original golden yellow color and smooth outline, unlike wild-type seeds. Furthermore, we investigated the fatty acids content and composition of wild type and CsHMA3 transgenic lines after heavy metal treatments compared to the control. The results showed higher total fatty acid amounts in seeds of CsHMA3 transgenic lines compared with those in wild-type seeds under heavy-metal stresses. In addition, the compositions of unsaturated fatty acids-especially 18:1 (oleic acid), 18:2 (linoleic acid; only in case of Co treatment), 18:3 (linolenic acid) and 20:1 (eicosenoic acid)-in CsHMA3 overexpressing transgenic lines treated with heavy metals were higher than those of wild-type seeds under the same conditions. Furthermore, reactive oxygen species (ROS) contents in wild-type leaves and roots when treated with heavy metal were higher than in CsHMA3 overexpressing transgenic lines. These results indicate that overexpression of CsHMA3 affects fatty acid composition and content-factors that are responsible for the fuel properties of biodiesel-and can alleviate ROS accumulation caused by heavy-metal stresses in Camelina. Due to these factors, we propose that CsHMA3 transgenic Camelina can be used for phytoremediation of metal-contaminated soil as well as for oil production.

Revision rates for metal-on-metal hip resurfacing and metal-on-metal total hip arthroplasty – a systematic review

DEFF Research Database (Denmark)

Ras Sørensen, Sofie-amalie L.; Jørgensen, Henrik L.; Sporing, Sune L.

2016-01-01

Purpose To compare revision rates of metal-on-metal (MoM) hip resurfacing (HRS) and MoM total hip arthroplasty (THA), as well as the primary causes for revisions. Methods The PubMed database was queried for potentially relevant articles addressing MoMTHA and MoMHRS, a total of 51 articles were....... The odds ratio was 1.25 (1.03:1.53) 95% CI (p = 0.03) (MoMHRS vs. MoMTHA). The studies of hip prostheses were separated into 2 categories of short- and long-term (more or less than 5 years). Short-term revision rate for MoMTHA was 4.5% after 4.8 years, and for MoMHRS 4.0% after 4.2 years. The odds ratio...

Failure of total hip implants: metals and metal release in 52 cases

DEFF Research Database (Denmark)

Jakobsen, Stig Storgaard; Lidén, Carola; Søballe, Kjeld

2014-01-01

Background . The pathogenesis of total joint replacement failure is multifactorial. One hypothesis suggests that corrosion and wear of alloys result in metal ion release, which may then cause sensitization and even implant failure, owing to the acquired immune reactivity. Objectives . To assess c...

77 FR 60478 - Control of Ferrite Content in Stainless Steel Weld Metal

Science.gov (United States)

2012-10-03

... NUCLEAR REGULATORY COMMISSION [[NRC-2012-0231] Control of Ferrite Content in Stainless Steel Weld... draft regulatory guide (DG), DG-1279, ``Control of Ferrite Content in Stainless Steel Weld Metal.'' This guide describes a method that the NRC staff considers acceptable for controlling ferrite content in...

Total phenol content and antioxidant activity of water solutions of plant extracts

Directory of Open Access Journals (Sweden)

Mirela Kopjar

2009-01-01

Full Text Available Water solutions of extracts were investigated for total phenol content, flavonoid content and antioxidant activity. Susceptibility to degradation of water solutions of plant extracts, under light and in the dark, during storage at room temperature was investigated in order to determine their stability prior to their application for fortification of food products. Large dispersion of total phenol (TP content in the investigated model solutions of selected extracts (olive leaves, green tea, red grape, red wine, pine bark PE 5:1, pine bark PE 95 %, resveratrol, ranging from 11.10 mg GAE/100 mL to 92.19 mg GAE/100 mL was observed. Consequently, large dispersion of total flavonoids (TF content (8.89 mg to 61.75 mg CTE/100 mL was also observed. Since phenols have been mostly responsible for antioxidant activity of extracts, in most cases, antioxidant activity followed the TP content. That was proven by estimation of correlation coefficient between the total phenol content and antioxidant activity. Correlation coefficients between investigated parameters ranged from 0.5749 to 0.9604. During storage of 5 weeks at room temperature loss of phenols and flavonoids occurred. Antioxidant activity decreased with the decrease of TP and TF content. Degradations of phenols and flavonoids were more pronounced in samples stored at light.

Effects of residues from municipal solid waste landfill on corn yield and heavy metal content

International Nuclear Information System (INIS)

Prabpai, S.; Charerntanyarak, L.; Siri, B.; Moore, M.R.; Noller, Barry N.

2009-01-01

The effects of residues from municipal solid waste landfill, Khon Kaen Municipality, Thailand, on corn (Zea mays L.) yield and heavy metal content were studied. Field experiments with randomized complete block design with five treatments (0, 20, 40, 60 and 80% v/v of residues and soil) and four replications were carried out. Corn yield and heavy metal contents in corn grain were analyzed. Corn yield increased by 50, 72, 85 and 71% at 20, 40, 60 and 80% treatments as compared to the control, respectively. All heavy metals content, except cadmium, nickel and zinc, in corn grain were not significantly different from the control. Arsenic, cadmium and zinc in corn grain were strongly positively correlated with concentrations in soil. The heavy metal content in corn grain was within regulated limits for human consumption.

Comparison of the Proximate Composition, Total Carotenoids and Total Polyphenol Content of Nine Orange-Fleshed Sweet Potato Varieties Grown in Bangladesh

Directory of Open Access Journals (Sweden)

Mohammad Khairul Alam

2016-09-01

Full Text Available In an attempt to develop the food composition table for Bangladesh, the nutritional composition of nine varieties of orange-fleshed sweet potato was analyzed together with total carotenoids (TCC and total polyphenol content (TPC. Each variety showed significant variation in different nutrient contents. The quantification of the TCC and TPC was done by spectrophotometric measurement, and the proximate composition was done by the AOAC method. The obtained results showed that total polyphenol content varied from 94.63 to 136.05 mg gallic acid equivalent (GAE/100 g fresh weight. Among the selected sweet potatoes, Bangladesh Agricultural Research Institute (BARI Sweet Potato 7 (SP7 contained the highest, whereas BARI SP6 contained the lowest amount of total polyphenol content. The obtained results also revealed that total carotenoids content ranged from 0.38 to 7.24 mg/100 g fresh weight. BARI SP8 showed the highest total carotenoids content, whereas BARI SP6 showed the lowest. Total carotenoids content was found to be higher in dark orange-colored flesh varieties than their light-colored counterparts. The results of the study indicated that selected sweet potato varieties are rich in protein and carbohydrate, low in fat, high in polyphenol and carotenoids and, thus, could be a good source of dietary antioxidants to prevent free radical damage, which leads to chronic diseases, and also to prevent vitamin A malnutrition.

Comparison of the Proximate Composition, Total Carotenoids and Total Polyphenol Content of Nine Orange-Fleshed Sweet Potato Varieties Grown in Bangladesh.

Science.gov (United States)

Alam, Mohammad Khairul; Rana, Ziaul Hasan; Islam, Sheikh Nazrul

2016-09-14

In an attempt to develop the food composition table for Bangladesh, the nutritional composition of nine varieties of orange-fleshed sweet potato was analyzed together with total carotenoids (TCC) and total polyphenol content (TPC). Each variety showed significant variation in different nutrient contents. The quantification of the TCC and TPC was done by spectrophotometric measurement, and the proximate composition was done by the AOAC method. The obtained results showed that total polyphenol content varied from 94.63 to 136.05 mg gallic acid equivalent (GAE)/100 g fresh weight. Among the selected sweet potatoes, Bangladesh Agricultural Research Institute (BARI) Sweet Potato 7 (SP7) contained the highest, whereas BARI SP6 contained the lowest amount of total polyphenol content. The obtained results also revealed that total carotenoids content ranged from 0.38 to 7.24 mg/100 g fresh weight. BARI SP8 showed the highest total carotenoids content, whereas BARI SP6 showed the lowest. Total carotenoids content was found to be higher in dark orange-colored flesh varieties than their light-colored counterparts. The results of the study indicated that selected sweet potato varieties are rich in protein and carbohydrate, low in fat, high in polyphenol and carotenoids and, thus, could be a good source of dietary antioxidants to prevent free radical damage, which leads to chronic diseases, and also to prevent vitamin A malnutrition.

Effect of climate change on phytochemical diversity, total phenolic content and in vitro antioxidant activity of Aloe vera (L.) Burm.f.

Science.gov (United States)

Kumar, Sandeep; Yadav, Amita; Yadav, Manila; Yadav, Jaya Parkash

2017-01-25

The aim of the present study was to analyse the effect of climate change on phytochemicals, total phenolic content (TPC) and antioxidant potential of methanolic extracts of Aloe vera collected from different climatic zones of the India. Crude methanolic extracts of A. vera from the different states of India were screened for presence of various phytochemicals, total phenolic content and in vitro antioxidant activity. Total phenolic content was tested by Folin-Ciocalteau reagent based assay whilst DPPH free radical scavenging assay, metal chelating assay, hydrogen peroxide scavenging assay, reducing power assay and β carotene-linoleic assay were used to assess the antioxidant potential of A. vera methanolic leaf extracts. Alkaloids, phenols, flavonoids, saponins, and terpenes were the main phytochemicals presents in all accessions. A significant positive correlation was found between TPC and antioxidant activity of different accessions. Extracts of highland and semi-arid zones possessed maximum antioxidant potential. Accessions from tropical zones showed the least antioxidant activity in all assays. It could be concluded that different agro-climatic conditions have effects on the phytochemicals, total phenolic content (TPC) and antioxidant potential of the A. vera plant. The results reveal that A. vera can be a potential source of novel natural antioxidant compounds.

Diagnostic value of lipids, total antioxidants, and trace metals in ...

African Journals Online (AJOL)

Materials and Methods: Anthropometric characteristics, total prostate specific antigen (tPSA), serum lipids (total cholesterol, LDL cholesterol, HDL cholesterol, and triglycerides), Vit. E, total antioxidant status (TAS), and trace metals (Se, Cu, Fe, Zn, and Mn) were determined in 40 patients with histopathological diagnosis of ...

ASSESSMENT OF HEAVY METALS CONTENTS IN BOTTOM SEDIMENTS OF BUG RIVER

Directory of Open Access Journals (Sweden)

Elżbieta Skorbiłowicz

2014-07-01

Full Text Available The development of industry, agriculture, and transport contributes to an increased environmental pollution by heavy metals. The aim of the study was preliminary assessment of the contents of selected metals (lead, cobalt, copper, chromium, cadmium and nickel in the sediments of Bug river. The study comprised part of the river flowing through Poland. It was found that the Bug river sediments are not contaminated in respect to the content of tested metals. Based on the analysis of the study results, these metals can be lined up in the following order: Cr > Pb > Cu > Ni > Co > Cd. Statistical analysis showed that copper and chromium occur in Bug river sediments in forms bindings with organic matter in majority of cases. The granulometric analysis of sediments from Bug river revealed the largest percentage of two fractions: 1.0–0.2 mm with average of 47.7 ± 19.77% and 0.2–0.1 mm with average of 20.6 ± 7.7%. These are the dominant fractions with the accumulation of metals in river sediments, which has been confirmed by statistical analysis.

Content Heavy Metal Pb, Cd In Perna viridis And Sediments In Semarang Bay

Science.gov (United States)

Suprapto, D.; Suryanti, S.; Latifah, N.

2018-02-01

Waste disposal from human activities, generally contain heavy metals such as Pb and Cd which derived from industrial activities. The aims of the study were to know the concentration of Pb and Cd heavy metals contained in Perna viridis tissue, sediment and water at Semarang Bay. This study was conducted in May 2017 at Semarang Bay. - Samples were collected using purposive sampling method. The heavy metal content in the water and clam was observed using- APHA method and was analyzed using AAS (Atomic Absorption Spectrophotometer). The results showed that concentration of heavy metal of Pb in the water was 0.00-50.5mg/L and the Cd content was of 26.9-51.7 mg/L, whereas the concentration of Pb in the sediment is 445.5-2.053.0mg/L and Cd 963.3-2,150.0 mg/L. Pb content in soft tissue of Perna viridis - is 67.1-1.933.9 mg/L and the concentration of Cd was 203.5-5.787.3 mg/L. The analysis of Pb and Cd in seawater, sediment and soft tissue of Perna viridis according to Enviroment Ministerial decree (KepMenLH ) number 51 of 2004 and applied by NOAA 1999 does not exceed the quality standard, that meant that the Perna viridis has been contaminated by metal Pb it is controversial with the above sentence and Cd. It concluded that the metal content of Pb and Cd in Perna viridis tissue exceeds the quality standard, so it is not suitable to be consumed, especially in high quantity

Metal ions released from fixed orthodontic appliance affect hair mineral content.

Science.gov (United States)

Mikulewicz, Marcin; Wołowiec, Paulina; Loster, Bartłomiej; Chojnacka, Katarzyna

2015-02-01

The objective was to evaluate metal ion accumulation in hair of patients undergoing orthodontic treatment with fixed appliances in time. The patients (N = 47) participated in a questionnaire survey. Hair sampling was performed at the beginning and in the 4th, 8th, and 12th month of the treatment. The content of metals (Cr, Ni, Fe) in hair was analyzed by ICP-OES equipped with USN nebulizer. The peak release of Cr and Fe occurred after 4 months of the treatment, and the peak release of Ni gradually increased throughout the whole year of the therapy. During 1 year treatment, an average accumulation of metals in hair tissue was 7.42 ± 14.19 μg of Ni, 8.94 ± 13.1 μg of Cr, and 131 ± 279 μg of Fe. The mean content of Cr was higher than the 90th percentile value for this element. The upper limit of literature reference ranges for Cr, Ni, and Fe in hair was not exceeded. The value of exposure (kinetics and dose) of orthodontic patients to metal ions released from orthodontic appliances can be assessed by hair mineral analysis. The content of Cr was statistically significantly higher during the treatment than before the beginning of therapy.

[Contents of total anthocyanins and total saponins as well as composition of saponin monomers of Purple and Green Notoginseng Radix et Rhizoma].

Science.gov (United States)

Zhao, Chang-ling; Yang, Sheng-chao; Chen, Zhong-jian; Shen, Yong; Wei, Fu-gang; Wang, Wu; Long, Ting-ju

2014-10-01

The contents of total anthocyanins and total saponins as well as the composition of saponin monomers of Purple and Green Notoginseng Radix et Rhizoma were studied to compare the medicinal quality and commercial values. Three-year-old Notoginseng Radix et Rhizoma was selected as the research materials. The contents of total anthocyanins and total saponins were determined by spectrophotometry. The compositions of saponin monomers were monitored by HPLC. The significance of content differences was determined by variance analysis. The contents of total anthocyanins and total saponins of Purple Notoginseng Radix et Rhizomawere about 204.85% and 33.86% higher than those of Green Notoginseng Radix et Rhizoma respectively. The Purple and Green Notoginseng Radix et Rhizoma both contained five saponin monomers whose contents were as follows: ginsenoside Rg1 > ginsenoside Rb1 > notoginsenoside R1 > ginsenoside Rd > ginsenoside Re. The contents of notoginsenoside R1, ginsenoside Rd and ginsenoside Re of Purple Notoginseng Radix et Rhizoma were about 16.03%, 10.83% and 5.39% higher than those of Green Notoginseng Radix et Rhizoma respectively. However, the contents of ginsenoside Rg1 and ginsenoside Rb1 of Green Notoginseng Radix et Rhizoma were about 0.93% and 3.33% higher than those of Purple Notoginseng Radix et Rhizoma respectively. With respect to Green Notoginseng Radix et Rhizoma, the increase of the total anthocyanins in Purple Notoginseng Radix et Rhizoma reached a significant level, but the increases of total saponins, notoginsenoside R1, ginsenoside Rd and ginsenoside Re and the decreases of ginsenoside Rg1 and ginsenoside Rb1 did not. The total anthocyanins accumulation in Notoginseng Radix et Rhizoma implies the content increases of the total saponins, notoginsenoside R1, ginsenoside Rd and ginsenoside Re, and the slight decreases of ginsenoside Rg1 and ginsenoside Rb1 contents; but the type and relative contents of saponin monomers remain unchanged. The medicinal

EVALUATION OF TOTAL MERCURY CONTENT IN MUSCLE TISSUE OF MARINE FISH AND ANIMALS

Directory of Open Access Journals (Sweden)

Daniel Bajčan

2013-02-01

Full Text Available Nowdays, a degree of contamination by heavy metals can be observed in the environment. Heavy metals have serious effects on all living organisms because they can accumulate in lethal or sublethal concentrations in the various parts of food chain and so they can cause different health problems like cardiovascular and cancer diseases. Marine fish and animals are one of the bigges source of mercury in human food. Therefore this work is focused to the rate of mercury content in muscle tisuues of marine fish and animals. We analyzed mainly frozen or otherwise preserved marine fish and animals that were purchased in retail network in Slovakia. Mercury content in samples was analyzed by cold vapor AAS with mercury analyser AMA254. The contents of mercury in analysed samples were in the interval 0.0057 – 0,697 mg.kg-1. Our results shows, that no analyzed samples of marine fish and animals had over-limit concetration of Hg, so they are safe for human nutrition.

Total and Free Sugar Content of Canadian Prepackaged Foods and Beverages

Science.gov (United States)

Bernstein, Jodi T.; Schermel, Alyssa; Mills, Christine M.; L’Abbé, Mary R.

2016-01-01

A number of recommendations for policy and program interventions to limit excess free sugar consumption have emerged, however there are a lack of data describing the amounts and types of sugar in foods. This study presents an assessment of sugar in Canadian prepackaged foods including: (a) the first systematic calculation of free sugar contents; (b) a comprehensive assessment of total sugar and free sugar levels; and (c) sweetener and free sugar ingredient use, using the University of Toronto’s Food Label Information Program (FLIP) database 2013 (n = 15,342). Food groups with the highest proportion of foods containing free sugar ingredients also had the highest median total sugar and free sugar contents (per 100 g/mL): desserts (94%, 15 g, and 12 g), sugars and sweets (91%, 50 g, and 50 g), and bakery products (83%, 16 g, and 14 g, proportion with free sugar ingredients, median total sugar and free sugar content in Canadian foods, respectively). Free sugar accounted for 64% of total sugar content. Eight of 17 food groups had ≥75% of the total sugar derived from free sugar. Free sugar contributed 20% of calories overall in prepackaged foods and beverages, with the highest at 70% in beverages. These data can be used to inform interventions aimed at limiting free sugar consumption. PMID:27657125

Total and Free Sugar Content of Canadian Prepackaged Foods and Beverages

Directory of Open Access Journals (Sweden)

Jodi T. Bernstein

2016-09-01

Full Text Available A number of recommendations for policy and program interventions to limit excess free sugar consumption have emerged, however there are a lack of data describing the amounts and types of sugar in foods. This study presents an assessment of sugar in Canadian prepackaged foods including: (a the first systematic calculation of free sugar contents; (b a comprehensive assessment of total sugar and free sugar levels; and (c sweetener and free sugar ingredient use, using the University of Toronto’s Food Label Information Program (FLIP database 2013 (n = 15,342. Food groups with the highest proportion of foods containing free sugar ingredients also had the highest median total sugar and free sugar contents (per 100 g/mL: desserts (94%, 15 g, and 12 g, sugars and sweets (91%, 50 g, and 50 g, and bakery products (83%, 16 g, and 14 g, proportion with free sugar ingredients, median total sugar and free sugar content in Canadian foods, respectively. Free sugar accounted for 64% of total sugar content. Eight of 17 food groups had ≥75% of the total sugar derived from free sugar. Free sugar contributed 20% of calories overall in prepackaged foods and beverages, with the highest at 70% in beverages. These data can be used to inform interventions aimed at limiting free sugar consumption.

Physico-chemical parameters and heavy metal contents of Ibuya ...

African Journals Online (AJOL)

The physico-chemical parameters and heavy metal contents of Ibuya River were investigated between September 2012 and August 2013 from four stations using standard methods to etermine acceptable water quality standards and evaluate possible sustainability of a thriving fisheries cum tourist sport fishing venture.

Total protein and lipid contents of canned fish on the Serbian market

OpenAIRE

Marković Goran; Mladenović Jelena; Cvijović Milica; Miljković Jelena

2015-01-01

Total protein and lipid contents were analysed in 5 samples of canned fish (sardines, Atlantic mackerel fillets, tuna in olive oil, smoked Baltic sprat and herring fillets) available on the Serbian market. Standard methods for the determination of protein (Kjeldahl method) and lipid (Soxhlet method) contents were used on drained samples. The protein content was 21.31% on average, with a range of 18.59% - 24.17%. Total lipids showed considerably large variations (5.49% - 35.20%), and averaged ...

THE EFFECT OF SEDIMENT GRAIN SIZE ON HEAVY METAL CONTENT

Directory of Open Access Journals (Sweden)

Svetlana Maslennikova

2012-06-01

Full Text Available In the natural surroundings tectonical, climatological, dynamic and physico-chemical conditions of sedimentation are the crucial factors in the process of sediment composition formation. Grain size is one of the most investigated reasons of space and temporary variability in heavy metal concentration. In general, the data on grain size measurement afford to appreciate sorption capacity of sediments and arrange them. The dependence heavy metal content on grain size of sediments has been examined in the enormous amount of research works. The main conclusion is that if grain size decreases, metal content increases.We have carried out sediment grain size measurement of two lakes (Chebachje Lake, Piketnoye Lake located in the South of Western Siberia, Russia. To define grain size of these sediments the sorting of samples collected layer-by-layer has been conducted by nest of sieves (from 43 to 1000 µm. Accomplished examinations allow to state that layer-by-layer grain size measurement of sediments has significant importance in reconstruction of paleoecologic peculiarities and also influences organic and inorganic matter concentrating in the sediments in dynamics

The relationship of heavy metals contents in soils to their content in legume seeds used in famous traditional food in kurdistan region-iraq

Directory of Open Access Journals (Sweden)

Dalaram Sullaiman Ismael

2016-11-01

Full Text Available In this work the level of risk heavy metals contents in Cowpea seeds comparison with heavy metal content in soil was studied. For the experiment three cowpea cultivars (brown, red, white were used. Cowpeas were harvested at full ripeness in Kalak location in Erbil city. The flame AAS (AAS Varian AA Spectr. DUO 240 FS/240Z/UltrAA was used for the determination of heavy metal contents in soil and plant materials. The soil which cultivated Cowpea, characterized neutral to slit alkali, with a typical content of cations K, Mg and P. Beans and the seeds of faba bean, cowpea and chickpeas boiled with salt eaten in the form of Lablabe, traditionly used heavy sweets such as knafa. Ful, which is fava beans cooked with chickpeas (garbanzo beans or make soup from fresh cowpea, fresh faba bean, fresh fasoulia, as well as lentil soup (shorbat adas and different kinds of salad after boiled. Cowpea grain legumes occupy an important place in human nutrition, especially in the dietary pattern of low income groups of people in developing countries. The level risk heavy metal contents in the soil determined was only Cd content was on the level of limit value given for the soil extract by aqua regia as well as Co content was higher than the limit value given for the relationship between soil and plant. All of determined values were lower than critical value extracted by NH4NO3 only the maximal available soil content of mobile Pb forms was exceeded but cowpea accumulated seeds in amounts the risky elements contents, with the exception of Ni, did not exceed limit for the maximum levels of chosen risk elements in studied legume. The content of the metals studied with the exception of cadmium, not exceed the maximum permissible value in legumes, as defined in the Codex Alimentarius. The aim of this research, to study or determine the content of risky heavy metals (Cu, Ni, Cr, Pb, and Cd in the soil and their relationship in selected varieties cowpea seeds cultivar. Faba

TOXICITY OF INDUSTRIAL EFFLUENT ON TOTAL CHLOROPHYLL CONTENT OF CERTAIN AQUATIC MACROPHYTES

OpenAIRE

Singh Priti; Vishen Ashish; Wadhwani R; Pandey Y.N

2012-01-01

To assess the toxicity of industrial effluents on certain macrophytes, the total chlorophyll content of free floating, submerged and emergent macrophytes were estimated in concentrations of industrial effluents at varying exposure duration. The result revealed reduction in total chlorophyll content of exposed macrophytes at higher concentrations of industrial effluents on prolonged duration.

Heavy metal content of selected African leafy vegetables planted in ...

African Journals Online (AJOL)

Heavy metal content of selected African leafy vegetables planted in urban and peri-urban Nairobi, Kenya. ... African Journal of Environmental Science and Technology ... Government clean-up activities and monitoring of waste disposal is ...

Studies of heavy metal contents and microbial composition of ...

African Journals Online (AJOL)

This study investigated the heavy metal content and microbial composition of rhizosphere of Panicum maximum obtained from some auto mechanic workshops in Benin City, Nigeria. The grass was uprooted and soil sample was taken from its rhizosphere. The sample were labeled appropriately and immediately transported ...

CT-based quantification of bone stock in large head metal-on-metal unilateral total hip replacements

NARCIS (Netherlands)

Boomsma, Martijn F.; Slouwerhof, Inge; van Lingen, Christiaan; Pakvis, Dean F. M.; van Dalen, Jorn A.; Edens, Mireille A.; Ettema, Harmen B.; Verheyen, Cees C. P. M.; Maas, Mario

2016-01-01

To explore ipsilateral and contralateral acetabular roof bone stock density in unilateral large head MoM THA whether there is a significant lower acetabular bone stock in the hip with a metal-on-metal (MoM) total hip replacement compared to the contralateral side. Second part of this study is to

Analysis of Metal Content of Samples of Gloriosa Superba L ...

African Journals Online (AJOL)

Purpose: To determine the metallic content of different parts of Gloriosa superba collected ... Results: Of the detected micronutrients, high concentrations of Zn, Fe and Mn were noted for samples ... Hitachi 2000) and flame photometer (Jenway.

Total alkaloid content in various fractions of Tabernaemonata sphaerocarpa Bl. (Jembirit) leaves

Science.gov (United States)

Salamah, N.; Ningsih, D. S.

2017-11-01

Tabernaemontana sphaerocarpa Bl. (Jembirit) is one of the Apocynaceae family plants containing alkaloid compound. Traditionally, it is used as an anti-inflammatory medicine. It is found to have a new bisindole alkaloid compound that shows a potent cytotoxic activity in human cancer. This study aimed to know the total alkaloid content in some fractions of ethanolic extract of T. sphaerocarpa Bl. leaf powder was extracted by maceration method in 70% ethanol solvent. Then, the extract was fractionated in a separatory funnel using water, ethyl acetate, and hexane. The total alkaloid content in each fraction was analyzed with visible spectrophotometric methods based on the reaction with Bromocresol Green (BCG). The total alkaloids in water fraction and ethyl acetate fraction were (0.0312±0.0009)% and (0.0281±0.0014)%, respectively. Meanwhile, the total alkaloid content in hexane was not detected. The statistical analysis, performed in SPSS, resulted in a significant difference between the total alkaloids in water fraction and ethyl acetate fraction. The total alkaloid in water fraction of T. sphaerocarpa Bl. was higher than the one in ethyl acetate fraction.

A study on compound contents for plastic injection molding products of metallic resin pigment

International Nuclear Information System (INIS)

Park, Young Whan; Kwak, Jae Seob; Lee, Gyu Sang

2016-01-01

Injection molding process is widely used for producing most plastic products. In order to make a metal-colored plastic product especially in modern luxury home alliances, metallic pigments which are mixed to a basic resin material for injection molding are available. However, the process control for the metal-colored plastic product is extremely difficult due to non-uniform melt flow of the metallic resin pigments. To improve the process efficiency, a rapid mold cooling method by a compressed cryogenic fluid and electricity mold are also proposed to decrease undesired compound contents within a molded plastic product. In this study, a quality of the metal-colored plastic product is evaluated with process parameters; injection speed, injection pressure, and pigment contents, and an influence of the rapid cooling and heating system is demonstrated

A study on compound contents for plastic injection molding products of metallic resin pigment

Energy Technology Data Exchange (ETDEWEB)

Park, Young Whan; Kwak, Jae Seob [Dept. of Mechanical Engineering, Pukyong National University, Busan (Korea, Republic of); Lee, Gyu Sang [Alliance Molding Engineering TeamLG Electronics Inc., Osan (Korea, Republic of)

2016-12-15

Injection molding process is widely used for producing most plastic products. In order to make a metal-colored plastic product especially in modern luxury home alliances, metallic pigments which are mixed to a basic resin material for injection molding are available. However, the process control for the metal-colored plastic product is extremely difficult due to non-uniform melt flow of the metallic resin pigments. To improve the process efficiency, a rapid mold cooling method by a compressed cryogenic fluid and electricity mold are also proposed to decrease undesired compound contents within a molded plastic product. In this study, a quality of the metal-colored plastic product is evaluated with process parameters; injection speed, injection pressure, and pigment contents, and an influence of the rapid cooling and heating system is demonstrated.

Total content and bioavailability of plant essential nutrients and heavy metals in top-soils of an industrialized area of Northwestern Greece

Science.gov (United States)

Barouchas, Pantelis; Avramidis, Pavlos; Salachas, Georgios; Koulopoulos, Athanasios; Christodoulopoulou, Kyriaki; Liopa-Tsakalidi, Aglaia

2017-04-01

Thirty surface soil samples from northwestern Greece in the Ptolemais-Kozani basin, were collected and analyzed for their total content in thirteen elements (Al, Ca, Fe, K, Mg, Mn, Na, P, Cd, Cr, Cu, Ni, Pb, Zn) by ICP-AES and bioavailable content from a plant nutrition scope of view for (Ca, Fe, K, Mg, Mn, Na, P, Zn) by AAS and colorimetric techniques. Particle size distribution, Cation Exchange Capacity (CEC) and the magnetic susceptibility, in a low and a high frequency (at 47kHz and 0.47kHz), of soil samples were measured also in order to correlate the results. Total carbonates were tested by the pressure technique (BD Inventions, FOGII digital soil calcimeter). The concentrations of these elements were compared with international standards and guidelines. The results indicated that Cu, Cd, Zn and Pb are found enriched in the top soils of the study area, mainly as a consequence of natural processes from the surrounding rocks. Moreover, the bioavailability of some of these elements with a plant nutrition interest was tested and results indicate that they do not pose an immediate threat to the environment or crops as it all demonstrated values in an adequate range. Magnetic susceptibility in low and high frequency was correlated with clay content.

The association between metal allergy, total knee arthroplasty, and revision

DEFF Research Database (Denmark)

Münch, Henrik J; Jakobsen, Stig Storgaard; Olesen, Jens T

2015-01-01

BACKGROUND AND PURPOSE: It is unclear whether delayed-type hypersensitivity reactions against implanted metals play a role in the etiopathogenesis of malfunctioning total knee arthroplasties. We therefore evaluated the association between metal allergy, defined as a positive patch test reaction...... to common metal allergens, and revision surgery in patients who underwent knee arthroplasty. PATIENTS AND METHODS: The nationwide Danish Knee Arthroplasty Register, including all knee-implanted patients and revisions in Denmark after 1997 (n = 46,407), was crosslinked with a contact allergy patch test......, the prevalence of cobalt and chromium allergy was markedly higher. Metal allergy that was diagnosed before implant surgery appeared not to increase the risk of implant failure and revision surgery. INTERPRETATION: While we could not confirm that a positive patch test reaction to common metals is associated...

Possible source and pattern distribution of heavy metals content in urban soil at Kuala Terengganu town center

International Nuclear Information System (INIS)

Foo, Toon Fong; Poh, Seng Chee; Asrul Azani Mahmood; Norhayati Mohd Tahir

2008-01-01

Total concentration of five trace metals (Cu, Mn, Cd, Pb and Zn) and two major elements (Al and Fe) as well as soil parameters (soil organic matter, pH and cation exchange capacity) were measured in soils of Kuala Terengganu town center. 40 surface soils (0-20 cm) were collected during the month of August, 2005. The soil samples (< 600 μm) were subjected to acid digestion and the concentration of total metal was measured using Atomic Absorption Spectrometer. Results show that the range of metals observed were 4.16-40.90 mg/ kg, 83.70 - 380.80 mg/ kg, 2940.00 - 28600.00 mg/ kg below detection limit (BDL) - 4.88 mg/ kg, 20.00 - 219.00 mg/ kg, 7.47 - 171.00 mg/ kg and 8840.00 - 62500.00 mg/ kg for Cu, Mn, Fe, Cd, Pb, Zn and Al, respectively. Factor and Pearsons correlation analyses suggest that the Fe, Mn and Al originates from the parent materials, whereas the possible sources of Cu, Cd, Pb and Zn are due to anthropogenic input such as vehicular traffic and metal corrosion since there are no major industrial activities in Kuala Terengganu. In addition, calculation of enrichment factors (Efs) for trace metals showed that Pb, Cd and Zn were significantly enriched, providing additional support to the contention that Pb, Cd and Zn level in Kuala Terengganu town center soils are due to human related activities. (author)

The effects of heavy metal ions on the chlorophyll content and cell membrane permeability of charophytes

International Nuclear Information System (INIS)

Fu Hualong; Chen Hao; Dong Bin; Qing Renwei

2001-01-01

The authors studied the effects of several heavy metal ions in different concentrations (Cd 2+ , Hg 2+ , Pb 2+ , Cr 6+ ) on the chlorophyll content and cell membrane permeability of Chara vulgaris L. It was discovered that the effects of heavy metal ions on the chlorophyll content and cell membrane permeability of Chara vulgaris L. changed with their different concentration. The trend was that the chlorophyll content and cell membrane permeability were decreased with the increase of the heavy metal ions. The degree of chlorophyll content affected was Cr 6+ , Cd 2+ , Hg 2+ , Pb 2+ , and that of cell membrane permeability affected was Cd 2+ , Cr 6+ , Hg 2+ , Pb 2+

Visualizing Metal Content and Intracellular Distribution in Primary Hippocampal Neurons with Synchrotron X-Ray Fluorescence.

Directory of Open Access Journals (Sweden)

Robert A Colvin

Full Text Available Increasing evidence suggests that metal dyshomeostasis plays an important role in human neurodegenerative diseases. Although distinctive metal distributions are described for mature hippocampus and cortex, much less is known about metal levels and intracellular distribution in individual hippocampal neuronal somata. To solve this problem, we conducted quantitative metal analyses utilizing synchrotron radiation X-Ray fluorescence on frozen hydrated primary cultured neurons derived from rat embryonic cortex (CTX and two regions of the hippocampus: dentate gyrus (DG and CA1. Comparing average metal contents showed that the most abundant metals were calcium, iron, and zinc, whereas metals such as copper and manganese were less than 10% of zinc. Average metal contents were generally similar when compared across neurons cultured from CTX, DG, and CA1, except for manganese that was larger in CA1. However, each metal showed a characteristic spatial distribution in individual neuronal somata. Zinc was uniformly distributed throughout the cytosol, with no evidence for the existence of previously identified zinc-enriched organelles, zincosomes. Calcium showed a peri-nuclear distribution consistent with accumulation in endoplasmic reticulum and/or mitochondria. Iron showed 2-3 distinct highly concentrated puncta only in peri-nuclear locations. Notwithstanding the small sample size, these analyses demonstrate that primary cultured neurons show characteristic metal signatures. The iron puncta probably represent iron-accumulating organelles, siderosomes. Thus, the metal distributions observed in mature brain structures are likely the result of both intrinsic neuronal factors that control cellular metal content and extrinsic factors related to the synaptic organization, function, and contacts formed and maintained in each region.

Heavy Metal Content in Selected Flavouring Plants and in Ultra-Basic Soil of Felda Rokan Barat, Negeri Sembilan, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Wan Mohd Razi Idris; Zulfahmi Ali Rahman; Tukimat Lihan; Ramlan Omar; Yan, L.K.

2012-01-01

A study was carried out at an ultra basic soil area in Felda Rokan Barat (FRB), Negeri Sembilan. Twenty plants of samples namely chili, turmeric, pandan and lemon grass were collected randomly for the determination of heavy metal contents such as Fe, Cd, Co, Cu, Mn, Ni, Pb, Cr and Zn. Heavy metals in plants were extracted by wet digestion method, whereas available and resistant heavy metals in soil were extracted by sequential extraction. Total heavy metals content in the soil were obtained by summation of resistant and available heavy metals. Heavy metals content in soil and plant extract were determined by using the Flame Atomic Absorption Spectrophotometer (FAAS). Results showed that Fe was the dominant composition in soil in the study area while Cd concentration was very low with values of < 10 mg/ kg. The range of heavy metals concentration in soils were Fe (2618.4 to 4248 mg/ kg), Mn (240.9 to 741.9 mg/ kg), Zn (81.9 to 324.8 mg/ kg), Cr (46.8 to 438.7 mg/ kg), Cu (15.7 to 81.7 mg/ kg), Pb (14.9 to 116.8 mg/ kg), Ni (10.1 to 545.6 mg/ kg), Cd (5.6 to 10.6 mg/ kg) dan Co (0.8 to 126.1 mg/ kg). Available Fe recorded the highest value in all of the plant substrates followed by Mn, Zn, Pb, Ni, Cr, Cu, Co and Cd. Based on percentage of availability Mn, Pb and Zn are considered most available by plant with availability percentage of 8 to 10 %. Concentration of Fe, Mn, Ni and Zn were high in all parts of plants compared to the other metals. The value of biological absorption coefficient (BAC) in chili, turmeric, pandan and lemon grass were in the range of 0.02-0.36, 0.03-0.41, 0.03-0.63 and 0.03-1.15, respectively. It can be concluded that the uptake of heavy metals by plants were normal even though the heavy metals concentration in the ultra basic soil was high. (author)

EVALUATION OF TOTAL MERCURY CONTENT IN MUSCLE TISSUE OF MARINE FISH AND ANIMALS

OpenAIRE

Daniel Bajčan; Július Árvay; Janette Musilová

2013-01-01

Nowdays, a degree of contamination by heavy metals can be observed in the environment. Heavy metals have serious effects on all living organisms because they can accumulate in lethal or sublethal concentrations in the various parts of food chain and so they can cause different health problems like cardiovascular and cancer diseases. Marine fish and animals are one of the bigges source of mercury in human food. Therefore this work is focused to the rate of mercury content in muscle tisuues of ...

Study on optimal fat content in total parenteral nutrition in partially hepatectomized rats.

Science.gov (United States)

Abe, S; Sakabe, S; Hirata, M; Kamuro, H; Asahara, N; Watanabe, M

1997-04-01

In order to investigate the optimal fat content for total parenteral nutrition (TPN) solutions, male Wistar rats were subjected to 70% hepatectomy and then placed, for five days, on one of five TPN regimens in which fat represented 0%, 10%, 20%, 30% and 40%, respectively, of the total calorie content. As serum triglyceride levels in the fat-treated groups were lower than those in the non-treated normal rats, it was concluded that the administered fat was sufficiently hydrolyzed. The greater the fat content, the higher the regeneration rate of the remnant liver. Significant differences were found between the 0%-fat group and 20%-plus fat groups. Hepatic triglyceride level was significantly lower in the 20%-fat group. Hepatic protein level was significantly elevated in all fat-treated groups. Serum phospholipids and total cholesterol due to the lecithin contained in fat emulsion were significantly elevated in the 30 and 40%-fat groups, indicating that fat content of 30 and 40% was excessive. The results suggest that TPN containing fat is superior to fat-free TPN for liver regeneration after partial hepatectomy, and that optimal fat content is estimated to be about 20% of total calorie content in the case of this fat emulsion.

[Radiographic appraisal between metal and bone interosculate backfill after total hip arthroplasty with trabecular metal cup].

Science.gov (United States)

Li, Wei; Zhou, Yi-Xin; Wu, Jian; Xu, Hui; Ji, Song-Jie

2009-02-15

To evaluate the bone refilling in the interface between the trabecular metal (TM) acetabular shell and the bone surface according to consecutive X film measuring after surgery. From July 2006 to July 2007, 35 patients (40 hips) accepted total hip replacement using trabecular metal monoblock acetabular cup system (TM). The cup was made of a ellipse shaped press fit Tantalum shell and high cross-linked PE liner (Longevity) with 28 mm inner diameter. The patients demography was: 16 male (20 hips), 19 female (20 hips), 5 bilateral hip replacements, age from 41 - 71 (mean 53), including 18 avascular necrosis hips, 16 osteoarthritis hips (including those secondary to a dysplasia hip), 4 avascular necrosis hips after femoral neck fracture, 2 Ankylosis Spondylitis. All the 40 total hip replacements used posterior approach, using hemispherical acetabular reamer and 2 mm press fit of final metal shell without screw fixation. The consecutive X film was taken at the end time of surgery and 2, 6, 12, 24 weeks, and 12 months. The clinical results was evaluate according to Harris scoring system, and the standard pelvis AP X film was measured at the interface between metal shell and the acetabular bone surface, witch was divided into five regions (A, B, C, D, E). Totally 32 patients (37 hips) were followed with average 8.7 months (7 - 12 months). The Harris before surgery was 50.5 (32 - 85), promoted to 91.0 (72 - 100), including 29 excellent, 6 good, 2 fair, and the total excellent and good rate was 94.6%. Complications include 4 patients leg length discrepancy from 1 - 2 cm, 3 patients moderate thigh pain and released after conservative therapy. No infection and dislocation was found. Twenty-one patients (23 hips) were found lucent line at the bone-metal interface from 1 - 5 mm, most common in B region and BC boundary than C, D, and CD boundary. All the patients followed was found the lucent line disappeared and refilled with bone at X film 24 weeks after surgery, however, no

Assessment of total flavonoid content and antioxidant activity of Mullein (Verbascum songaricum ecotypes

Directory of Open Access Journals (Sweden)

2017-11-01

Full Text Available Background and objectives: The Mullein genus is the largest genus of Scrophulariaceae family which has extensive natural habitat in southwest of Iran. Mullein contains compounds such as phenolic compounds, mucilage, saponins and anthocyanin. The aim of this study was to evaluate the total flavonoid content and antioxidant activity of mullein ecotypes in Iran. Methods: Six ecotypes of the Verbascum songaricum were evaluated. Determination of total flavonoid content was performed bythealuminium chloride colourimetric method. The antioxidant activity of the flower extracts was measured using the DPPH method. Results: The results showed that total flavonoid content and antioxidant activity were different among ecotypes.  The highest and lowest amounts of total flavonoidwas obtained  from Shermard ecotype (13.42 mg rutin /g DW and Klar ecotypes(10.10 mg rutin /g DW, respectively. The highest amounts of antioxidant activity were obtained from the Shermard ecotype (IC50 246.35 μg/mL. The correlation analysis showed that a significant relation between flavonoid, antioxidant activity and habitat elevation. Conclusion: Total flavonoid content and antioxidant activity of the samples were affected by habitat climatic.  The present data indicated that the highest antioxidant activity may be due to higher flavonoid content and the habitat elevation was effective on the flavonoid content. Due to the high amounts of flavonoid and antioxidant activity of mullein extract, it seems to be a good herbal option as an antioxidant in complementary therapies.

Heavy Metal Contents in Spices from Markets in Sarajevo, Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Huremović, J.

2014-05-01

Full Text Available Spices are some of the most common foods in the human diet around the world. Spices are dried parts of plants used often as diet components to improve aroma and acceptability of food. The aim of this work was to determine the contents of seven heavy metals (Cr, Cu, Fe, Mn, Ni, Pb and Zn in spices available at local markets in Sarajevo. Metal concentrations in six spice samples (black pepper (Piper nigrum, basil (Ocimum basilicum, oregano (Oreganum vulgaris, paprika (Capsicum annuum, parsley (Petroselinum crispum and rosemary (Rosmarinus officinalis were determined by flame atomic absorption spectrometry. The content of chromium and nickel in all samples was below 5 mg kg-1 . Copper levels were in the range of 2.36-19.47 mg kg-1 , iron 6.80-785.56 mg kg-1 , manganese 6.14-59.36 mg kg-1 , lead 0.74-20.35 and zinc 6.93-85.44 mg kg-1 . These results were in agreement with other published data except in the case of Pb which content was slightly higher. Daily intake of different metals was calculated and compared with the MRL values given by ATSDR (2013. The content of lead in most of the samples was above the maximum permitted concentrations recommended by WHO and national regulations of Bosnia and Herzegovina.  

Particulate metallic debris in cemented total hip arthroplasty.

Science.gov (United States)

Salvati, E A; Betts, F; Doty, S B

1993-08-01

Several studies conducted by the authors in the last six years demonstrate that the generation of metallic debris is more severe with titanium alloy than with cobalt-chrome alloy femoral components in cemented total hip arthroplasty (THA). The debris is generated from the articulating surface, particularly if entrapped acrylic debris produces three-body wear, and from the stem surface when the component loosens and abrades against fragmented cement. In selected cases in which the titanium metallic debris is copious, premature failure and severe progressive bone loss occurs. Electron microscopy demonstrates that the particles of metallic debris can be extremely small (a few hundredths of 1 micron). They are phagocytized by the macrophages and transported to the phagolysosomes. In this highly corrosive environment, the very high surface area of the particles may release toxic concentrations of the constituents of the alloy intracellularly, probably leading to progressive cell degeneration and death, with subsequent release of intracellular enzymes and ingested metallic debris. This cycle most likely repeats itself, leading to tissue necrosis. The results presented do not support the use of titanium alloy femoral components for cemented THA, particularly for the articulating surface.

Contents and localization of heavy metals in human placentae

Energy Technology Data Exchange (ETDEWEB)

Reichrtova, E.; Ursinyova, M.; Palkovicova, L.; Wsolova, L. [Institute of Preventive and Clinical Medicine, Bratislava (Slovakia)

1998-06-01

The placenta was used as an exposure index for the risk evaluation of prenatal fetal chemical exposure. Full-term placenta samples collected at maternity hospitals in 4 regions of different environmental pollutants and traffic density were examined for lead and cadmium contents using atomic absorption spectrometry (AAS). The results showed similar lead contents in placental samples from all selected regions, except for a small town with a lower traffic density. The findings may implicate traffic-related environmental lead pollution, rather than industrial sources. The highest concentration of cadmium was shown to be in the samples collected from the region with the highest proportion of smoking mothers (including passive smoking). Simultaneously, the placental samples were processed histochemically to determine the location of lead in the placental tissue (using light microscopy). The degree of placental metal contamination was done semiquantitatively, and the difference between the rural and industrial region was statistically compared. Parallel quantitative AAS analyses and semiquantitative histochemical lead analyses of human placental samples revealed analogous results regarding the level of placental contamination with metals. (orig.) (orig.) With 4 figs., 12 refs.

Long-term trends in the total electron content

Czech Academy of Sciences Publication Activity Database

Laštovička, Jan; Urbář, Jaroslav; Kozubek, Michal

2017-01-01

Roč. 44, č. 16 (2017), s. 8186-8172 ISSN 0094-8276 R&D Projects: GA ČR(CZ) GA15-03909S Institutional support: RVO:68378289 Keywords : total electron content * long-term trend * solar control Subject RIV: DG - Athmosphere Sciences, Meteorology OBOR OECD: Climatic research Impact factor: 4.253, year: 2016 http://onlinelibrary.wiley.com/doi/10.1002/2017GL075063/full

Antioxidant capacity and total polyphenol content in different apple varieties cultivated in Chile

OpenAIRE

Quitral, Vilma; Sepulveda, Marcela; Schwartz, Marco; Kern, Werther

2014-01-01

Three apple varieties cultivated in Chile were studied in total polyphenol content by Folin Ciocalteu method and antioxidant capacity by FRAP method: Granny Smith, Royal Gala and Fuji (whole and peeled apples). The total polyphenol content in whole and peeled apples do not show significant differences. The antioxidant capacity of the Granny Smith variety is significantly higher than Royal Gala and Fuji. Apple dehydration at 60 oC for 4 hours to obtain flakes keeps polyphenol content high. The...

Effect of heavy metals on the level of vitamin E, total lipid and glycogen reserves in the liver of common carp (Cyprinus carpio L.

Directory of Open Access Journals (Sweden)

Vinodhini Rajamanickam

2008-06-01

Full Text Available The aim of this study is to examine some changes in the biochemical profile of the liver tissue of common carp (Cyprinus carpio L. exposed to a sublethal concentration of heavy metal mixture (cadmium, chromium, nickel and lead. The biochemical profile, specifically glycogen, total lipid and vitamin E content in the liver tissue was examined and compared to that of the control group. The exposed group showed a marked decline in glycogen and vitamin E reserves. Conversely an increase in total lipid in comparison to control was observed. The result reflects the sensitivity of these biochemical parameters to the effects of sublethal levels of combined heavy metals for this the widely consumed freshwater fish.

Source of Global Scale Variations in the Midday Vertical Content of Ionospheric Metal Ions

Science.gov (United States)

Joiner, J.; Grebowsky, J. M.; Pesnell, W. D.; Aikin, A. C.; Goldberg, Richard A.

1999-01-01

An analysis of long baseline NIMBUS 7 SBUV (Solar Backscatter UV Spectrometer) observations of the latitudinal variation of the noontime vertical Mg' content above approx. 70 km have revealed seasonal, solar activity and magnetic activity dependencies in the Mg+ content. The distributions were categorized in terms of magnetic coordinates partially because transport processes lifting metallic ions from the main meteor ionization layer below 100 km up into the F- region and down again are controlled by electrodynamical processes. Alternatively, the Nimbus Mg+ distributions may simply be a result of ion/neutral chemistry changes resulting from atmospheric changes and not dynamics. In such a case magnetic control would not dominate the distributions. Using in situ satellite measurements of metal ions from the Atmosphere Explorer satellites in the region above the main meteor layer and published sounding rocket measurements of the main metallic ion layers, the effects of the dynamics on the vertical content are delineated. The consequences of atmospheric changes on the vertical content are explored by separating the Nimbus measurements in a geodetic frame of reference.

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment-A Case Study of Yanta District in Xi'an.

Science.gov (United States)

Shao, Tianjie; Pan, Lihuan; Chen, Zhiqing; Wang, Ruiyuan; Li, Wenjing; Qin, Qing; He, Yuran

2018-02-25

Taking Yanta District in Xi'an as the research object, the present study measures the contents of Cadmium (Cd), Lead (Pb), Copper (Cu), Nickel (Ni), and Chromium (Cr) in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi'an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi'an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower.

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment—A Case Study of Yanta District in Xi’an

Directory of Open Access Journals (Sweden)

Tianjie Shao

2018-02-01

Full Text Available Taking Yanta District in Xi’an as the research object, the present study measures the contents of Cadmium (Cd, Lead (Pb, Copper (Cu, Nickel (Ni, and Chromium (Cr in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi’an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi’an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower.

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment—A Case Study of Yanta District in Xi’an

Science.gov (United States)

Shao, Tianjie; Pan, Lihuan; Chen, Zhiqing; Wang, Ruiyuan; Li, Wenjing; Qin, Qing; He, Yuran

2018-01-01

Taking Yanta District in Xi’an as the research object, the present study measures the contents of Cadmium (Cd), Lead (Pb), Copper (Cu), Nickel (Ni), and Chromium (Cr) in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi’an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi’an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower. PMID:29495319

Correlation between heavy metal contents and antioxidant activities in medicinal plants grown in copper mining areas

International Nuclear Information System (INIS)

Maharia, R.S.; Dutta, R.K.; Acharya, R.; Reddy, A.V.R.

2012-01-01

Three commonly used medicinal plants, e.g., Adhatoda vasica, Cassia fistula, and Withania somnifera grown in two contrasting environmental conditions, namely from copper mining site and from control site corresponding to soil not contaminated with Cu, to understand correlations between high Cu bioaccumulation in medicinal plants on their antioxidant activities. Concentrations of some essential metals, e.g., Cr, Mn, Fe, Cu, Zn, and Se in the leaves of these plants were measured by instrumental neutron activation analysis. The Cu levels in the samples from mining site were in the range of 32.6 to 57.2 mg/kg, which were 5-7 folds higher than the control samples, while Cr levels were about 2-folds higher in the mining site. Speciation studies of Cr revealed negligible content of toxic hexavalent Cr. Antioxidant assay of these plants from both the sampling sites, measured as total phenolic content, total flavonoid content, 2,2'-diphenyl-1-picrylhydrazyl, free radical scavenging ability, and chelating ability with ferrous ions exhibited maximum activity for A. vasica, while that of W. somnifera was minimum. However, the variations in the antioxidant activities for each medicinal plant species from mining site and control site did not reveal significant differences. (author)

Effect of heavy metals on growth and heavy metal content of Allium porrum L. and Pisum sativum L

Energy Technology Data Exchange (ETDEWEB)

Gruenhage, L.; Jaeger, H.J.

1985-01-01

The effects of cadmium, lead, zinc and copper, singly and in combination, on yield, heavy metal content and the mineral composition of Allium porrum L. and Pisum sativum L. have been investigated. The Cd, Pb, Zn and Cu concentrations of shoots and roots of Allium porrum increased with increasing heavy metal contamination of soil. However, no visible symptoms of heavy metal toxicity were recognized. The dry matter production was reduced as a function of heavy metal concentration and combination. The mechanisms of combinations were mostly synergistic. The correlation between pollutant contents (nmol/shoot) and yield was higher than the correlation between heavy metal concentrations of soil or shoots (ppm) and yield. Results of regression analyses showed that the inhibition of copper translocation caused by Cd, Pb and Zn was responsible for the yield depressions. The antagonism between Cd and N-deficiency showed that the level of N-supply was without negative effects on yield depressions of Pisum sativum caused by Cd. In contrast to this, the N-form played an important role in Cd-toxicity as the synergism between Cd and NH4 illustrated. K-deficiency as well as acidic nutrient solution (pH=4) diminished the root/shoot-barrier for Cd and therefore Cd-translocation from roots to shoots increased. Concerning calcium, magnesium and iron the decrease of ion uptake caused by Cd was statistically significant higher than yield depression.

Revision total knee arthroplasty with the use of trabecular metal cones

DEFF Research Database (Denmark)

Jensen, Claus L; Petersen, Michael Mygind; Schrøder, Henrik

2012-01-01

"Trabecular Metal Cone" (TM Cone) (Zimmer, Inc, Warsaw, Ind) for reconstruction of bone loss in the proximal tibia during revision total knee arthroplasty is now optional. Forty patients were randomized to receive revision total knee arthroplasty with or without TM Cone (No TM Cone). The Anderson...

Quantitative analysis of orthopedic metal artefact reduction in 64-slice computed tomography scans in large head metal-on-metal total hip replacement, a phantom study

NARCIS (Netherlands)

Boomsma, Martijn F.; Warringa, Niek; Edens, Mireille A.; Mueller, Dirk; Ettema, Harmen B.; Verheyen, Cees C. P. M.; Maas, Mario

2016-01-01

Purpose: Quantification of the effect of O-MAR on decreasing metal artefacts caused by large head metal on metal total hip arthroplasty (MoM THA) in a dedicated phantom setup of the hip. Background: Pathological reactions of the hip capsule on Computed tomography (CT) can be difficult to diagnose

Cytotoxicity, Total Phenolic Contents and Antioxidant Activity of the ...

African Journals Online (AJOL)

The leaves of Annona muricata were extracted using ethanol and the extracts were evaluated for cytotoxicity using Brine Shrimp Lethality Assay, total phenolic content (TPC) and antioxidant activity using DPPH radical scavenging assay. The crude extract showed 73.33 % mortality at 1000 μg/mL concentration and its ...

Increases of equatorial total electron content (TEC) during magnetic storms

International Nuclear Information System (INIS)

Yeboah-Amankwah, D.

1976-01-01

This paper is a report on the analysis of equatorial electron content, TEC, during magnetic storms. Storms between 1969 and 1972 have been examined as part of an on-going study of TEC morphology during magnetically disturbed days. The published magnetic Ksup(p) indices and TEC data from the Legon abservatory have been employed. The general picture arising from the analysis is that the total electron content of the ionosphere is significantly enhanced during magnetic storms. (author)

The association between metal allergy, total hip arthroplasty, and revision

DEFF Research Database (Denmark)

Thyssen, Jacob Pontoppidan; Jakobsen, Stig Storgaard; Engkilde, Kåre

2009-01-01

BACKGROUND AND PURPOSE: It has been speculated that the prevalence of metal allergy may be higher in patients with implant failure. We compared the prevalence and cause of revisions following total hip arthroplasty (THA) in dermatitis patients suspected to have contact allergy and in patients...... in general with THA. Furthermore, we compared the prevalence of metal allergy in dermatitis patients with and without THA. MATERIALS AND METHODS: The Danish Hip Arthroplasty Registry (DHAR) contained detailed information on 90,697 operations. The Gentofte patch-test database contained test results...... was similar in cases (12%) and in patients from the DHAR (13%). The prevalence of metal allergy was similar in cases and controls. However, the prevalence of metal allergy was lower in cases who were patch-tested after operation (6%) than in those who were patch-tested before operation (16%) (OR = 2.9; 95% CI...

Bulk metal concentrations versus total suspended solids in rivers: Time-invariant & catchment-specific relationships.

Science.gov (United States)

Nasrabadi, Touraj; Ruegner, Hermann; Schwientek, Marc; Bennett, Jeremy; Fazel Valipour, Shahin; Grathwohl, Peter

2018-01-01

Suspended particles in rivers can act as carriers of potentially bioavailable metal species and are thus an emerging area of interest in river system monitoring. The delineation of bulk metals concentrations in river water into dissolved and particulate components is also important for risk assessment. Linear relationships between bulk metal concentrations in water (CW,tot) and total suspended solids (TSS) in water can be used to easily evaluate dissolved (CW, intercept) and particle-bound metal fluxes (CSUS, slope) in streams (CW,tot = CW + CSUS TSS). In this study, we apply this principle to catchments in Iran (Haraz) and Germany (Ammer, Goldersbach, and Steinlach) that show differences in geology, geochemistry, land use and hydrological characteristics. For each catchment, particle-bound and dissolved concentrations for a suite of metals in water were calculated based on linear regressions of total suspended solids and total metal concentrations. Results were replicable across sampling campaigns in different years and seasons (between 2013 and 2016) and could be reproduced in a laboratory sedimentation experiment. CSUS values generally showed little variability in different catchments and agree well with soil background values for some metals (e.g. lead and nickel) while other metals (e.g. copper) indicate anthropogenic influences. CW was elevated in the Haraz (Iran) catchment, indicating higher bioavailability and potential human and ecological health concerns (where higher values of CSUS/CW are considered as a risk indicator).

No association between pseudotumors, high serum metal-ion levels and metal hypersensitivity in large-head metal-on-metal total hip arthroplasty at 5-7-year follow-up

DEFF Research Database (Denmark)

Hjorth, Mette Holm; Stilling, Maiken; Soballe, Kjeld

2015-01-01

-ion concentrations were measured, metal allergy and atopic dermatitis were evaluated, and the questionnaires of the Oxford Hip Score (OHS), Harris Hip Score (HHS) and the Short-Form Health Survey (SF-36) were completed. RESULTS: Pseudotumors were found in eight patients, but they were asymptomatic and their serum...... pseudotumor formation, serum metal-ion levels, metal patch test reactivity, and atopic dermatitis. However, clinicians should be aware of asymptomatic pseudotumors, and we advise further exploration into the mechanisms involved in the pathogenesis of pseudotumors.......OBJECTIVE: The relationship between metal wear debris, pseudotumor formation and metal hypersensitivity is complex and not completely understood. The purpose of this study was to assess the prevalence of pseudotumor formation in a consecutive series of metal-on-metal (MoM) total hip arthroplasty...

AAS determination of total mercury content in environmental samples

International Nuclear Information System (INIS)

Moskalova, M.; Zemberyova, M.

1997-01-01

Two methods for determination of total mercury content in environmental samples soils, and sediments, were compared. Dissolution procedure of soils, sediments, and biological material under elevated pressure followed by determination of mercury by cold vapour atomic absorption spectrometry using a MHS-1 system and direct total mercury determination without any chemical pretreatment from soil samples using a Trace Mercury Analyzer TMA-254 were compared. TMA-254 was also applied for the determination of mercury in various further standard reference materials. Good agreement with certified values of environmental reference materials was obtained. (authors)

The effect of carbon content on mechanical properties, failure and corrosion resistance of deposited chromium metal

Directory of Open Access Journals (Sweden)

Леонід Кімович Лещинськiй

2017-06-01

Full Text Available It has been shown that if choosing a metal composition for surfacing rolls and rollers of continuous casting machines, both the carbon impact on the mechanical and functional properties and the critical values of the chromium concentration, which determine the corrosion resistance of the metal with regard to electrochemical corrosion theory, should be considered as well. The paper studied the effect of chromium and carbon steel the X5-X12 type on the structure, technological strength, mechanical properties, fracturing resistance and corrosion resistance of the weld metal. The composition of chromium tool steels (deposited metal (X5-used for the rolls of hot rolling mills and (X12-used for continuous casting machines rollers correspond to these values. The impact of carbon on the properties of the deposited metal containing chromium was considered by comparing the data for both types of the deposited metal. It was found that for both types of the deposited metal (X5 and X12, the limiting value of the carbon content, providing an optimal combination of strength, ductility, failure resistance is the same. If the carbon content is more than the limiting value – (0,25% the technological strength and failure resistance of the deposited metal significantly reduce. With increasing carbon content from 0,18 to 0,25% the martensite structure has a mixed morphology – lath and plate. The strength and toughness of the deposited metal grow. Of particular interest is simultaneous increase in the specific work of failure resulted from crack inhibition at the boundary with far less solid and more ductile ferrite. As for the 5% chromium metal, the X12 type composition with 0,25% C, is borderline. With a further increase in the carbon content of the metal both ductility and failure resistance sharply decrease and with 0,40% C the growth rate of fatigue crack increases by almost 1,5 times

Estimation of trace metal contents in locally-baked breads

International Nuclear Information System (INIS)

Khalid, N.; Rehman, S.

2013-01-01

In order to establish base line levels, estimation of some essential trace metals (Cu, Fe, Mn and Zn) has been conducted in four brands of fifteen locally baked breads of Rawalpindi /Islamabad area employing Atomic Absorption Spectrophotometry (AAS). The samples were digested in a mixture of nitric acid and perchloric acid and the analysis was done with air-acetylene flame. The reliability of the procedure employed was verify by analyzing Standard Reference Material, i.e., wheat flour (NBS-SRM-1567) for its Cu, Fe, Mn and Zn contents which were in good agreement with the certified values. The results revealed that brown breads contained higher amount of Fe 177.3 micro g g/sup -1/and Zn 19.27 micro g g/sup -1/while levels of Cu 21.90 micro g g/-sup 1/was found higher in the samples of plain bread. The determined metal concentrations in the bread samples were compared with the reported values for other countries. The effect of kneading/baking/slicing processes on the concentration levels of these metals was also studied. The daily intake of these metals through this source was calculated and compared with the recommended dietary allowance. (author)

Antioxidant Capacity and Metal Content of Physalis Peruviana L. Fruit Sold in Markets

Directory of Open Access Journals (Sweden)

Ayse Eken

2014-12-01

Full Text Available Aim: The dietary intake of medicinal food with antioxidant activity and required amounts of trace elements is important to pursue good healthy life. In our study, we aimed to determine the antioxidant capacity and metal content of goldenberry (Physalis peruviana L. fruit sold in markets in Kayseri. Material and Method: The antioxidant capacity of P. peruviana fruit was determined by the 2,2-diphenyl-1-picrylhydrazyl (DPPH free radical scavenging assay. The DPPH radical scavenger capacity of the methanol extract of fruit was compared with known antioxidants such as ascorbic acid, gallic acid, and butylated hydroxytoluene (BHT as references. The metal content of P. peruviana fruit was measured by using atomic absorption spectrometer (AAS. Results: The fruit of P. peruviana was found to possess DPPH free radical scavenging activity but the antioxidant capacity was lower than the standard substances. Inhibitory concentration 50% (IC50 values of P. peruviana, ascorbic acid, gallic acid, and BHT were determined as 32 mg/ml, 3.8 mg/ml, 3.51 mg/ml, and 1.21 mg/ml, respectively. As a result of the analysis by AAS, it was observed that P. peruviana fruit contented plentiful trace elements and the content of heavy metal was small amount or not detected. Discussion: These observations suggest that the fruit of P. peruviana has a potential source of antioxidant and trace elements of natural origin.

Assessment of arsenic and heavy metal contents in cockles (Anadara granosa) using multivariate statistical techniques

International Nuclear Information System (INIS)

Abbas Alkarkhi, F.M.; Ismail, Norli; Easa, Azhar Mat

2008-01-01

Cockles (Anadara granosa) sample obtained from two rivers in the Penang State of Malaysia were analyzed for the content of arsenic (As) and heavy metals (Cr, Cd, Zn, Cu, Pb, and Hg) using a graphite flame atomic absorption spectrometer (GF-AAS) for Cr, Cd, Zn, Cu, Pb, As and cold vapor atomic absorption spectrometer (CV-AAS) for Hg. The two locations of interest with 20 sampling points of each location were Kuala Juru (Juru River) and Bukit Tambun (Jejawi River). Multivariate statistical techniques such as multivariate analysis of variance (MANOVA) and discriminant analysis (DA) were applied for analyzing the data. MANOVA showed a strong significant difference between the two rivers in term of As and heavy metals contents in cockles. DA gave the best result to identify the relative contribution for all parameters in discriminating (distinguishing) the two rivers. It provided an important data reduction as it used only two parameters (Zn and Cd) affording more than 72% correct assignations. Results indicated that the two rivers were different in terms of As and heavy metal contents in cockle, and the major difference was due to the contribution of Zn and Cd. A positive correlation was found between discriminate functions (DF) and Zn, Cd and Cr, whereas negative correlation was exhibited with other heavy metals. Therefore, DA allowed a reduction in the dimensionality of the data set, delineating a few indicator parameters responsible for large variations in heavy metals and arsenic content. Taking into account of these results, it can be suggested that a continuous monitoring of As and heavy metals in cockles be performed in these two rivers

THE STUDY OF HEAVY METALS CONTENT IN THE CATCHMENT AREA OF THE BIEBRZA RIVER AND THREE TRIBUTARIES

Directory of Open Access Journals (Sweden)

Zuzanna Kazimierowicz

2014-11-01

Full Text Available Sediment samples were taken in 11 measuring points of the Biebrza River and determined the contents of six metals (Cu, Cr, Co, Ni, Cd and Zn. Arithmetic mean, median and standard deviation were calculated. The sources of heavy metals in bottom sediments are: pollutants of fieldsand meadows (admixtures of plant protection products and fertilizers, discharges of domestic sewage and municipal from local wastewater treatment plants, wastewater di-scharges from rural buildings and pollutions of anthropogenic origin. Research of pollution of bottom sediments with heavy metals are needed tool for monitoring the aquatic environ-ment. Continuous monitoring metal content of the sediments will counteract the effects of the threat of biological life in the water reservoir, which may occur in the case of notorious exceeded permissible content of harmful substances.

Are trends in total electron content (TEC) really positive?

Czech Academy of Sciences Publication Activity Database

Laštovička, Jan

2013-01-01

Roč. 118, č. 6 (2013), s. 3831-3835 ISSN 2169-9380 R&D Projects: GA ČR GAP209/10/1792 Institutional support: RVO:68378289 Keywords : Long-term trends * total electron content Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 3.440, year: 2013 http://onlinelibrary.wiley.com/doi/10.1002/jgra.50261/abstract

[Analysis of effect of topographical conditions on content of total alkaloid in Coptidis Rhizoma in Chongqin, China].

Science.gov (United States)

Liu, Xin; Huang, He; Yang, Yan-fang; Wu, He-zhen

2014-12-01

To study ecology suitability rank dividing of the total alkaloid content of Coptis Rhizoma for selecting artificial planting base and high-quality industrial raw material in Chongqing province. Based on the investigation of PCB and DEM data of Chongqing province, the relationship between the total alkaloid content in Coptis Rhizoma and topographical conditions was analyzed by statistical analysis. The geographic information systems (GIS)-based assessment and landscape ecological principles were applied to assess eco logy suitability areas of Coptis Rhizoma in Chongqing. slope, aspect and altitude are main topographical factors that affect the content of the total alkaloid content in Coptis Rhizoma The total alkaloid content in Coptis Rhizoma is higher in the lower altitude, shady slope and bigger slope areas. The total alkaloid content is higher in the south areas of Chongqing province and lower in the northeast. Terrain conditions of the southern region of Chongqing are most suitable for The accumulated of total alkaloid Coptis Rhizoma content.

Short-term changes of metal availability in soil. Part I: Comparing sludge-amended with metal-spiked soils.

NARCIS (Netherlands)

Natal-da-Luz, T.; Ojeda, G.; Costa, D.M.; Pratas, J.; Lanno, R.P.; van Gestel, C.A.M.; Sousa, J.P.

2012-01-01

Sewage sludge application to soils is regulated by its total metal content. However, the real risk of metals is determined by the fraction that is biologically available. The available fraction is highly related to the strength of metal binding by the matrix, which is a dynamic process. The

Chlorophyll meter reading and total nitrogen content applied as ...

African Journals Online (AJOL)

The present study was aimed to assess the relationship between the reading of the chlorophyll meter and the total nitrogen (N) content in the leaf in different parts of the crambe plant, depending on the doses of nitrogen applied to the canopy. Randomized block design in a split plot experimental design was used. The plots ...

Studies of Radioactive Contaminations and heavy metal contents in vegetables and fruit from Lublin, Poland

International Nuclear Information System (INIS)

Chibowski, S.

2000-01-01

This paper presents studies of the level of some gamma radioactive elements and heavy metals in fruits, vegetables and plants from Lublin. Potassium 40 K isotope was most prevalent element in the examined samples. It concentrated mainly in aboveground parts of some vegetables, for example in parsley and carrots haulm and in leaves of red beet and leek (from 1135 to 1940 Bq/kg). considerably lower concentrations of this element were noticed in the roots of the vegetables, running from 210 to 448 Bq/kg of dry matter. In examined fruit, the 40 K contents ranged from 490 to 510 Bq/kg. Transfer factors of 40 K, from the soil to the vegetables and fruit, ranged from 0.3 to 2.9. The natural isotopes of uranium series account for 17% of total activity, whereas thorium series was 19-20% of its activity. In fact, in examined fruit (raspberry, red and black currants) and roots of vegetables caesium 137 Cs was not detected, whereas some amounts of it were noticed in green parts of vegetables, from 4.0 to 8.4 Bq/kg of dry matter. The transfer factor of 137 Cs from the soil to examined samples ranged from 0.03 to 0.4. in all studied samples examined on heavy metal contents no valid safety standards for these elements were exceeded. (author)

Total antioxidant content of alternatives to refined sugar.

Science.gov (United States)

Phillips, Katherine M; Carlsen, Monica H; Blomhoff, Rune

2009-01-01

Oxidative damage is implicated in the etiology of cancer, cardiovascular disease, and other degenerative disorders. Recent nutritional research has focused on the antioxidant potential of foods, while current dietary recommendations are to increase the intake of antioxidant-rich foods rather than supplement specific nutrients. Many alternatives to refined sugar are available, including raw cane sugar, plant saps/syrups (eg, maple syrup, agave nectar), molasses, honey, and fruit sugars (eg, date sugar). Unrefined sweeteners were hypothesized to contain higher levels of antioxidants, similar to the contrast between whole and refined grain products. To compare the total antioxidant content of natural sweeteners as alternatives to refined sugar. The ferric-reducing ability of plasma (FRAP) assay was used to estimate total antioxidant capacity. Major brands of 12 types of sweeteners as well as refined white sugar and corn syrup were sampled from retail outlets in the United States. Substantial differences in total antioxidant content of different sweeteners were found. Refined sugar, corn syrup, and agave nectar contained minimal antioxidant activity (sugar had a higher FRAP (0.1 mmol/100 g). Dark and blackstrap molasses had the highest FRAP (4.6 to 4.9 mmol/100 g), while maple syrup, brown sugar, and honey showed intermediate antioxidant capacity (0.2 to 0.7 mmol FRAP/100 g). Based on an average intake of 130 g/day refined sugars and the antioxidant activity measured in typical diets, substituting alternative sweeteners could increase antioxidant intake an average of 2.6 mmol/day, similar to the amount found in a serving of berries or nuts. Many readily available alternatives to refined sugar offer the potential benefit of antioxidant activity.

Antioxidant activity and total phenolic content in Red Ginger (Zingiber officinale) based drinks

Science.gov (United States)

Widayat; Cahyono, B.; Satriadi, H.; Munfarida, S.

2018-01-01

Indonesia is a rich spices country, both as a cooking spice and medicine. One of the most abundant commodities is red ginger, where it still less in application. On the other hand, the level of pollution is higher, so antioxidants are needed to protect the body cells from the bad effects of free radicals. The body can not naturally produce antioxidants as needed, so we need to consume foods with high antioxidant content. The purpose of this study is to know the antioxidant activity and total phenolic content in red ginger (Zingiber officinale) based drinks. Research design with complete randomized design (RAL) with factorial pattern 3 x 3, as the first factor is red ginger extract and water ratio (1: 1, 1: 2 and 1: 3) and second factor is the type of sugar used (cane sugar, palm sugar and mixed sugar). The results of this study indicate that red ginger extract and water ratio of 1: 3 give higher antioxidant. The highest antioxidant obtained in red ginger extract and water ratio of 1: 3 and using mixed sugar. That antioxidants value is 88.56%, it is not significant decreased compared to the antioxidant of pure ginger extract that is 91.46%. For higher phenol total content obtained on syrup that uses palm sugar. The highest phenol total content obtained in red ginger extract and water ratio of 1: 1 and using palm sugar. That total phenol content value is 6299 ppm.

FeNbB bulk metallic glass with high boron content

Energy Technology Data Exchange (ETDEWEB)

Stoica, M.; Das, Jayanta; Eckert, Juergen [IFW Dresden, Institute for Complex Materials, P.O. Box 270016, D-01171 Dresden (Germany); Hajlaoui, Khalil; Yavari, Alain Reza [LTPCM-CNRS, I.N.P. Grenoble, 1130 Rue de la Piscine, BP 75, F-38402 University Campus (France)

2007-07-01

Fe-based alloys able to form magnetic bulk metallic glasses (BMGs) are of the type transition metal - metalloid and often contain 5 or more elements. Usually, the metalloid content is around 20 atomic %. Very recently, the Fe{sub 66}Nb{sub 4}B{sub 30} alloy was found to be able to form BMG by copper mold casting technique, despite its high metalloid content. Several composition with boron contents around 30 at. % or even higher were calculated since 1993 as possible compositions of the remaining amorphous matrix after the first stage of nanocrystallization of Finemet-type Fe{sub 77}Si{sub 14}B{sub 9} glassy ribbons with 0.5 to 1 atomic % Cu and a few percent Nb addition. Melt-spun ribbons of all calculated compositions were found to be glassy. The composition of the ternary Fe-based BMG investigated in the present study resulted as an optimization of all possibilities. The alloy is ferromagnetic with glass transition temperature T{sub g}=845 K, crystallisation temperature T{sub x}=876 K, liquidus temperature T{sub liq}=1451 K and mechanical strength of 4 GPa. The coercivity of as-cast samples is very low, around 1.5 A/m. The present contribution aims at discussing the thermal stability, mechanical and magnetic properties of the Fe{sub 66}Nb{sub 4}B{sub 30} BMG.

What fraction of the total metal flux into lakes is retained in the sediments

Energy Technology Data Exchange (ETDEWEB)

Nriagu, J O; Wong, H K.T.

1986-12-01

The concentrations of, and deposition rates for, the pollutant metals (Pb, Cu, Zn, Ni, and Cd) and the rare earth elements are reported for the sediments and settling particulates in a large, remote lake (Lake Opeongo) in the Algonquin Provincial Park, Ontario. Using a mass conservation model based on the rare earth elements, it is estimated that only 40 to 60% of pollutant metals getting into the lake is retained by the sediments. The low retention rate may explain the widely reported intrabasin and intra-lake differences in metal contents of sediments and casts some doubt on the use of pollutant metal profiles in retrospective assessment of the human contribution to the metal flux into many lake basins. 22 references.

Effects of nitrogen enrichment on heavy metals content of cattle ...

African Journals Online (AJOL)

The research was carried out at John Ker Nigeria Organo-Mineral Company site at Ikot Ekpene, Akwa Ibom State, Nigeria, to investigate the effect of nitrogen enrichment on contents of heavy metals in cattle dung/poultry manure compost and the growth of maize. Cattle dung was mixed with poultry manure in the ratio of 3:1 ...

Effect of the edaphic factors and metal content in soil on the diversity of Trichoderma spp.

Science.gov (United States)

Racić, Gordana; Körmöczi, Péter; Kredics, László; Raičević, Vera; Mutavdžić, Beba; Vrvić, Miroslav M; Panković, Dejana

2017-02-01

Influence of edaphic factors and metal content on diversity of Trichoderma species at 14 different soil sampling locations, on two depths, was examined. Forty-one Trichoderma isolates from 14 sampling sites were determined as nine species based on their internal transcribed spacer (ITS) sequences. Our results indicate that weakly alkaline soils are rich sources of Trichoderma strains. Also, higher contents of available K and P are connected with higher Trichoderma diversity. Increased metal content in soil was not inhibiting factor for Trichoderma species occurrence. Relationship between these factors was confirmed by locally weighted sequential smoothing (LOESS) nonparametric smoothing analysis. Trichoderma strain (Szeged Microbiology Collection (SZMC) 22669) from soil with concentrations of Cr and Ni above remediation values should be tested for its potential for bioremediation of these metals in polluted soils.

Antioxidant properties, total phenolic and total flavonoid content of the Slovak white wines – welschriesling and chardonnay

Directory of Open Access Journals (Sweden)

Daniel Bajčan

2017-01-01

Full Text Available The biologically active compounds in wines, especially phenolics, are responsible for reduced risk of developing chronic diseses (cardiovascular diseases, cancer, diabetes, Alzheimer disease, etc., due to their antioxidant activities. Twenty six Slovak white wines, produced from different geographical origins, were examined in this study. The antioxidant activity, total phenolic and flavonoid contents of two types monovarietal wines - Welschriesling and Chardonnay were evaluated. All three mentioned parameters were determined by UV-VIS absorption spectrometry. The results showed that both types of Slovak white wines were high in polyphenols (average content was 303.2 mg GAE.L-1 in Welschriesling, resp. 355.6 mg GAE.L-1 in Chardonnay and flavonoids (average content was 51.9 mg CE.L-1 in Welschriesling, resp. 60.1 mg CE.L-1 in Chardonnay, as well as a high antioxidant activity (average value was 35.0% inhibition of DPPH in Welschriesling, resp. 43.3% inhibition of DPPH in Chardonnay, comparable to the wines produced in other regions in the world. Among the white wines, Chardonnay had higher content of total polyphenols, as well as flavonoids and higher values of antioxidant activity. Our results confirmed very strong linear correlations between all three analysed parameters (TPC, TFC and AA: TPC and TFC (r = 0.818, AA and TPC (r = 0.699, resp. TFC and AA (r = 0.693.

Trace metal content in aspirin and women's cosmetics via proton induced x-ray emission (PIXE)

International Nuclear Information System (INIS)

Hichwa, B.P.; Pun, D.D.; Wang, D.

1981-01-01

A multielemental analysis to determine the trace metal content of generic and name-brand aspirins and name-brand lipsticks was done via proton induced x-ray (PIXE) measurements. The Hope College PIXE system is described as well as the target preparation methods. The trace metal content of twelve brands of aspirin and aspirin substitutes and fourteen brands of lipstick are reported. Detection limits for most elements are in the range of 100 parts per billion (ppb) to 10 parts per million

Metal-on-Metal Total Hip Resurfacing Arthroplasty: An Evidence-Based Analysis.

Science.gov (United States)

2006-01-01

The objective of this review was to assess the safety and effectiveness of metal on metal (MOM) hip resurfacing arthroplasty for young patients compared with that of total hip replacement (THR) in the same population. Total hip replacement has proved to be very effective for late middle-aged and elderly patients with severe degenerative diseases of the hips. As indications for THR began to include younger patients and those with a more active life style, the longevity of the implant became a concern. Evidence suggests that these patients experience relatively higher rates of early implant failure and the need for revision. The Swedish hip registry, for example, has demonstrated a survival rate in excess of 80% at 20 years for those aged over 65 years, whereas this figure was 33% by 16 years in those aged under 55 years. Hip resurfacing arthroplasty is a bone-conserving alternative to THR that restores normal joint biomechanics and load transfer. The technique has been used around the world for more than 10 years, specifically in the United Kingdom and other European countries. Metal-on-metal hip resurfacing arthroplasty is an alternative procedure to conventional THR in younger patients. Hip resurfacing arthroplasty is less invasive than THR and addresses the problem of preserving femoral bone stock at the initial operation. This means that future hip revisions are possible with THR if the initial MOM arthroplasty becomes less effective with time in these younger patients. The procedure involves the removal and replacement of the surface of the femoral head with a hollow metal hemisphere, which fits into a metal acetabular cup. Hip resurfacing arthroplasty is a technically more demanding procedure than is conventional THR. In hip resurfacing, the femoral head is retained, which makes it much more difficult to access the acetabular cup. However, hip resurfacing arthroplasty has several advantages over a conventional THR with a small (28 mm) ball. First, the large

The influence of pH and organic matter content in paddy soil on heavy metal availability and their uptake by rice plants

Energy Technology Data Exchange (ETDEWEB)

Zeng Fanrong; Ali Shafaqat; Zhang Haitao [Department of Agronomy, College of Agriculture and Biotechnology, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China); Ouyang Younan [China National Rice Research Institute, Fuyang 310041 (China); Qiu Boyin; Wu Feibo [Department of Agronomy, College of Agriculture and Biotechnology, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China); Zhang Guoping, E-mail: zhanggp@zju.edu.c [China National Rice Research Institute, Fuyang 310041 (China)

2011-01-15

The experiments were done to investigate the effect of soil pH and organic matter content on EDTA-extractable heavy metal contents in soils and heavy metal concentrations in rice straw and grains. EDTA-extractable Cr contents in soils and concentrations in rice tissues were negatively correlated with soil pH, but positively correlated with organic matter content. The combination of soil pH and organic matter content would produce the more precise regression models for estimation of EDTA-Cu, Pb and Zn contents in soils, demonstrating the distinct effect of the two factors on the availability of these heavy metals in soils. Soil pH greatly affected heavy metal concentrations in rice plants. Furthermore, inclusion of other soil properties in the stepwise regression analysis improved the regression models for predicting straw Fe and grain Zn concentrations, indicating that other soil properties should be taken into consideration for precise predicting of heavy metal concentrations in rice plants. - Soil pH and organic matter content significantly affect heavy metal availability and accumulation in rice plants.

Results and Conclusions from the NASA Isokinetic Total Water Content Probe 2009 IRT Test

Science.gov (United States)

Reehorst, Andrew; Brinker, David

2010-01-01

The NASA Glenn Research Center has developed and tested a Total Water Content Isokinetic Sampling Probe. Since, by its nature, it is not sensitive to cloud water particle phase nor size, it is particularly attractive to support super-cooled large droplet and high ice water content aircraft icing studies. The instrument comprises the Sampling Probe, Sample Flow Control, and Water Vapor Measurement subsystems. Results and conclusions are presented from probe tests in the NASA Glenn Icing Research Tunnel (IRT) during January and February 2009. The use of reference probe heat and the control of air pressure in the water vapor measurement subsystem are discussed. Several run-time error sources were found to produce identifiable signatures that are presented and discussed. Some of the differences between measured Isokinetic Total Water Content Probe and IRT calibration seems to be caused by tunnel humidification and moisture/ice crystal blow around. Droplet size, airspeed, and liquid water content effects also appear to be present in the IRT calibration. Based upon test results, the authors provide recommendations for future Isokinetic Total Water Content Probe development.

THE RESEARCH OF TOTAL POLYPHENOLS CONTENT AND THEIR CHANGES IN DIFFERENT VARIETIES OF POTATOES

Directory of Open Access Journals (Sweden)

Beáta Volnová

2015-02-01

Full Text Available Polyphenols are secondary metabolites of plants with antioxidant properties. In this work we research the changes in the content of total polyphenols in five varieties of potatoes (Rumelia, Arwen, Megan, Malvína, Erídia. Potatoes were grown at the stage of full maturity from Matejovce nad Hornádom, region of Poprad. Total polyphenols we determined in whole peeled potatoes; in the outside part of peeled potato tubers (1 cm; in inside part of potato tubers (mean 2 cm and in the whole peel-boiled potatoes. The total polyphenols content was determined by spectrophotometry (λ = 765 nm and it was used lyophilized samples in ethanol extracts. In whole peeled potatoes was the content of total polyphenols in the range from 243.34 mg.kg-1 DM (cv. Rumelia to 446.38 mg.kg-1 DM (cv. Megan, in the outside part of peeled potato tubers was content in the range from 190.45 mg.kg-1 (cv. Rumelia to 446.84 mg.kg-1 DM (cv. Malvína and in inside part of potato tubers from 245.51 mg.kg-1 to 446.26 mg.kg-1 DM (Arwen < Rumelia < Megan < Erídia < Malvína. In the whole peel-boiled potatoes was the lowest content of total polyphenols in variety Rumelia (252.5 mg.kg-1 DM and the highest content in variety Megan (440.54 mg.kg-1 DM. Results were statistically evaluated by the Analysis of Variance (ANOVA – Multiple Range Tests, Method: 95.0 percent LSD using statistical software STATGRAPHICS (Centurion XVI.I, USA and the regression and correlation analysis (Microsoft Excel was used.

Study on the prediction of soil heavy metal elements content based on visible near-infrared spectroscopy

Science.gov (United States)

Liu, Jinbao; Zhang, Yang; Wang, Huanyuan; Du, Yichun

2018-06-01

The estimation of soils heavy metal content can reflect the impending surroundings of surface, which lays theoretical foundation for using covered vegetation to monitor environment and investigate resource. In this study, the contents of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb in 44 soil samples were collected from Fufeng County, Yangling County and Wugong County, Shaanxi Province and were used as data sources. ASD FieldSpec HR (350-2500 nm), and then the NOR, MSC and SNV of the reflectance were pretreated, the first deviation, second deviation and reflectance reciprocal logarithmic transformation were carried out. The optimal spectroscopy estimation model of nine heavy metal elements of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb was established by regression method. Comparing the diffuse reflectance characteristics of different heavy metal contents and the effect of different pretreatment methods on the establishment of soil heavy metal spectral inversion model. The results of chemical analysis show that there was a serious Hg pollution in the study area, and the Cd content was close to the critical value. The results show that: (1) NOR, MSC and SNV were adopted for the acquisition of visible near-infrared. Combining differential transformation can improve the information of heavy metal elements in the soil, and use the correlation band energy Significantly improve the stability and predictability of the model. (2) The modeling accuracy of the optimal model of nine heavy metal spectra of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb by PLSR method were 0.70, 0.79, 0.69, 0.81, 0.86, 0.58, 0.55, 0.99, 0.62. (3) The optimal estimation model of different elements using different treatment methods has better stability and higher precision, and can realize the rapid prediction of nine kinds of heavy metal elements in this region.

Evaluation of total polyphenol content and antioxidant capacity of different verity lupin seeds

Directory of Open Access Journals (Sweden)

Ismael Sulaiman Dalaram

2017-01-01

Full Text Available Legumes, including lupins, beans, lentil and chickpea, are one of the most important crops in the world because of their nutritional quality. Lupin seeds have been used as human food and animal feed since ancient times. It was known that antioxidant photochemical in foods have many health benefits including prevention of various diseases associated with oxidative stress such as cancer, cardiovascular disease, neuro-degeneration and diabetes. Lupin grains are rich sources of complex carbohydrates, protein, vitamins and minerals. Antioxidants can be found naturally in foods. Total polyphenols content and antioxidant activity were measured in four varieties of lupin, namely in white lupin, blue lupin, yellow lupin and Mutabilis lupin species. A majority of antioxidants naturally present in foods occur in phenolic structures and especially in flavonoid structures. The content of the total polyphenols was determined by using the Folin-Ciocalteu reagent (FCR. Antioxidant activity was measured by using a compound DPPH˙ (2.2-diphenyl-1-picrylhydrazyl. In the present experiment according to the average contents of total polyphenols (TPC in dry matter of lupin seeds there was the following line: L. Angustifolius (blue lupin (696.212 mg GAE.100g-1 > L. Albus (white lupin (614.13 mg GAE.100g-1 > L. Luteus (yellow lupin (467.78 mg GAE.100g-1 > L. Mutabilis (pearl lupin (367.36 mg GAE.100g-1. Based on the measured values of total antioxidant capacity (TAC of lupin samples can be classified as follows: L. Albus (white lupin (43.44% >L. Angustifolius (blue lupin (38.27% >L. Luteus (yellow lupin (22.29% >L. Mutabilis (Pearl lupin (20.80%. The relationship of antioxidant capacity with total polyphenolic was discussed. According to used statistical analyzes. Correlation between the phenolic contents and antioxidant capacity was significantly positive (r = 0.88. Our results confirmed that legumes can be a good source of bioactive compounds in the human nutrition

Antioxidant Capacities and Total Phenolic Contents of 56 Wild Fruits from South China

Directory of Open Access Journals (Sweden)

Hua-Bin Li

2010-11-01

Full Text Available In order to identify wild fruits possessing high nutraceutical potential, the antioxidant activities of 56 wild fruits from South China were systematically evaluated. The fat-soluble components were extracted with tetrahydrofuran, and the water-soluble ones were extracted with a 50:3.7:46.3 (v/v methanol-acetic acid-water mixture. The antioxidant capacities of the extracts were evaluated using the ferric reducing antioxidant power (FRAP and Trolox equivalent antioxidant capacity (TEAC assays, and their total phenolic contents were measured by the Folin-Ciocalteu method. Most of these wild fruits were analyzed for the first time for their antioxidant activities. Generally, these fruits had high antioxidant capacities and total phenolic contents. A significant correlation between the FRAP value and the TEAC value suggested that antioxidant components in these wild fruits were capable of reducing oxidants and scavenging free radicals. A high correlation between antioxidant capacity and total phenolic content indicated that phenolic compounds could be the main contributors to the measured antioxidant activity. The results showed that fruits of Eucalyptus robusta, Eurya nitida, Melastoma sanguineum, Melaleuca leucadendron, Lagerstroemia indica, Caryota mitis, Lagerstroemia speciosa and Gordonia axillaris possessed the highest antioxidant capacities and total phenolic contents among those tested, and could be potential rich sources of natural antioxidants and functional foods. The results obtained are very helpful for the full utilization of these wild fruits.

Total petroleum hydrocarbons and trace metals in tropical estuary of Todos os Santos Bay, Brazil

Energy Technology Data Exchange (ETDEWEB)

Celino, Joil Jose; Oliveira, Olivia Maria Cordeiro de; Queiroz, Antonio Fernando de Souza [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil); Trigueis, Jorge Alberto [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacazes, RJ (Brazil); Garcia, Karina Santos [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2008-07-01

As part of the environmental assessment within Todos os Santos Bay, State of Bahia - Brazil, in summer of 2005, superficial water and sediments samples of the mangrove were collected at five locations to determine the spatial distribution of anthropogenic pollutants in the Dom Joao estuary at the Sao Francisco do Conde Region. Sandy sediments with low organic matter content dominate the studied area. Trace metal levels indicated that sediments were moderately polluted with Cu (overall mean: 21.48 +/- 4.76 {mu}g.g-1 dry sediment), but not with Pb (15 +/- 8), Zn (38 +/- 10), Cr (15 +/- 7), Ni (13 +/- 6) and Cd (0.4 +/- 0.2). Depending on location, total petroleum hydrocarbons ranged from 1.6 to 10.6 {mu}g.g-1. To discriminate pattern differences and similarities among samples, principal component analysis (PCA) was performed using a correlation matrix. PCA revealed the latent relationships among all the stations investigated and confirmed our analytical results. Principal components analysis confirmed two regions according to their environmental quality. The results pointed out that almost all the area presented some substances that can cause adverse biological effects, especially in the outermost region where some metals are above TEL level. (author)

Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry

Energy Technology Data Exchange (ETDEWEB)

Zarazua, G. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico)]. E-mail: gzo@nuclear.inin.mx; Avila-Perez, P. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Tejeda, S. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Barcelo-Quintal, I. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico); Martinez, T. [Universidad Nacional Autonoma de Mexico, Facultad de Quimica, Mexico, D.F. (Mexico)

2006-11-15

The present area of study is located in the Upper Course of the Lerma River (UCLR). The Lerma is one of the most important rivers of Mexico, where it drains highly populated and industrialized regions. The aim of the present study is to determine the heavy metal concentration of Cr, Mn, Fe, Cu and Pb in dissolved and total phases of the UCLR by means of Total Reflection X-ray Fluorescence Spectrometry (TXRF). The surface water samples were collected at 8 sites distributed following the stream flow direction of the river. Four sampling campaigns were carried out in each site in a 1-year period. A sample preparation method was applied in order to obtain the total and dissolved fraction and to destroy the organic matter. The total heavy metal average concentration decrease in the following order: Fe (2566 {mu}g/L) > Mn (300 {mu}g/L) > Cu (66 {mu}g/L) > Cr (21 {mu}g/L) > Pb (15 {mu}g/L). In general, the heavy metal concentrations in water of the UCLR are below the maximum permissible limits.

Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry

Science.gov (United States)

Zarazua, G.; Ávila-Pérez, P.; Tejeda, S.; Barcelo-Quintal, I.; Martínez, T.

2006-11-01

The present area of study is located in the Upper Course of the Lerma River (UCLR). The Lerma is one of the most important rivers of Mexico, where it drains highly populated and industrialized regions. The aim of the present study is to determine the heavy metal concentration of Cr, Mn, Fe, Cu and Pb in dissolved and total phases of the UCLR by means of Total Reflection X-ray Fluorescence Spectrometry (TXRF). The surface water samples were collected at 8 sites distributed following the stream flow direction of the river. Four sampling campaigns were carried out in each site in a 1-year period. A sample preparation method was applied in order to obtain the total and dissolved fraction and to destroy the organic matter. The total heavy metal average concentration decrease in the following order: Fe (2566 μg/L) > Mn (300 μg/L) > Cu (66 μg/L) > Cr (21 μg/L) > Pb (15 μg/L). In general, the heavy metal concentrations in water of the UCLR are below the maximum permissible limits.

Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry

International Nuclear Information System (INIS)

Zarazua, G.; Avila-Perez, P.; Tejeda, S.; Barcelo-Quintal, I.; Martinez, T.

2006-01-01

The present area of study is located in the Upper Course of the Lerma River (UCLR). The Lerma is one of the most important rivers of Mexico, where it drains highly populated and industrialized regions. The aim of the present study is to determine the heavy metal concentration of Cr, Mn, Fe, Cu and Pb in dissolved and total phases of the UCLR by means of Total Reflection X-ray Fluorescence Spectrometry (TXRF). The surface water samples were collected at 8 sites distributed following the stream flow direction of the river. Four sampling campaigns were carried out in each site in a 1-year period. A sample preparation method was applied in order to obtain the total and dissolved fraction and to destroy the organic matter. The total heavy metal average concentration decrease in the following order: Fe (2566 μg/L) > Mn (300 μg/L) > Cu (66 μg/L) > Cr (21 μg/L) > Pb (15 μg/L). In general, the heavy metal concentrations in water of the UCLR are below the maximum permissible limits

Total antioxidant capacity, total phenolic content and mineral elements in the fruit peel of Myrciaria cauliflora

Directory of Open Access Journals (Sweden)

Clináscia Rodrigues Rocha Araújo

2013-12-01

Full Text Available The in vitro antioxidant capacity, total phenolic content and mineral elements of the fruit peel of Myrciaria cauliflora were investigated. The antioxidant capacity was analyzed by the diphenylpicrylhydrazyl (DPPH, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS, ferric reducing antioxidant power (FRAP and β-carotene methods. The assays based on the DPPH (EC50 = 3.18 g sample/g DPPH, ABTS•+ (1017 μmol Trolox/g sample, FRAP (1676 µM Fe2SO4/g sample and β-carotene/linoleic acid (70% of oxidation inhibition methods indicated a high antioxidant capacity of the fruit peel extract of the plant. The Folin-Denis method was more efficient in determining the total phenolic compound contents in the different solvents than the Folin-Ciocalteu one. Extractions made with 4:1 methanol-water, 4:1 ethanol-water, 3:2 ethanol-water and 3:2 acetone-water solutions using the Folin-Denis method exhibited high contents of phenolic compounds (18.95, 14.06, 12.93 and 11.99 mg GAE/g, respectively. Potassium was the major element found in the fruit peel, followed by phosphorus, calcium, magnesium and iron, in that order. As a result, the fruit peel of M. cauliflora can be considered as an important source of natural antioxidants and essential elements of easy access for the population and for application in the food industry.

Total Phenolic Content and Antioxidant Capacity of Radish as Influenced by the Variety and Vegetative Stage

Directory of Open Access Journals (Sweden)

Maria Doinița Borș

2015-05-01

Full Text Available This study investigates the influence of the variety and vegetative stage on the total phenolic content and antioxidant capacity of radish. Samples of seeds, sprouts (day-3, day-5 and day-7 and roots of three varieties (red, white and black of radish (Raphanussativus were collected and tested for the above-mentioned parameters. Determination of total phenolic content was performed by Folin-Ciocalteau assay and antioxidant activity by DPPH assay. The total phenolic content ranged between 4.75 and 19.44 mg GAE/g DW and the antioxidant capacity between 12 and 75%. The highest total phenolic content and antioxidant capacity was found in radish sprouts and the lowest in radish roots, and among samples in the black radish variety. 

Response of total phenolic content and antioxidant activities of bush ...

African Journals Online (AJOL)

The positive health benefits associated with tea are made possible by the antioxidant activity of phenolic compounds present in tea. The total phenolic content and antioxidant activity of bush tea (Athrixia phylicoides DC.) and special tea (Monsonia burkeana) were studied. The extractions were done in triplicate using cold ...

Comparing heavy metal contents in crops receiving mineral fertilisers and animal manure

DEFF Research Database (Denmark)

Christensen, Bent Tolstrup; Elsgaard, Lars

2014-01-01

Spring barley (grain, straw), grass-clover (two cuts), winter wheat (grain, straw) and silage maize grown in the Askov long-term experiment with different levels (0, ½, 1, 1½, 2) of mineral fertiliser (NPK) and animal manure (AM) had concentrations of As, Pb, Cd and Hg below the EC maximum permis...... of NPK and AM does not pose a threat in terms of feed quality. However, the long-term accumulation of heavy metals added with mineral fertilisers and animal manure is essentially irreversible and may threaten soil quality....... in the analysed metal contents between crops grown with NPK and AM. Crop contents of uranium and thallium were below the analytical detection limits regardless of nutrient source and addition rate. Thus in a farming context similar to that of the Askov experiment, the long-term application of standard rates...

Influence of metals on essential oil content and composition of lemongrass (Cymbopogon citratus (D.C.) Stapf.) grown under different levels of red mud in sewage sludge amended soil.

Science.gov (United States)

Gautam, Meenu; Agrawal, Madhoolika

2017-05-01

Lemongrass is a commercially important perennial herb with medicinal value and ability to tolerate high alkaline and saline conditions. Essential oil bearing plants can grow safely in soil contaminated with heavy metals without severe effects on morphology and oil yield. The present study was aimed to assess the essential oil content and composition in lemongrass in response to elevated metals in above-ground plant parts. Pot experiment was conducted for six months using sewage sludge as soil amendment (soil: sludge: 2:1 w/w) followed by red mud treatments (0, 5, 10 and 15% w/w). Garden soil without sludge and red mud was control and there were ten replicates of each treatment. Oil content in leaves was differently affected due to presence of metals in soil under different treatments. Oil content under S RM5 (5% red mud) treatment was raised by 42.9 and 11.5% compared to the control and S RM0 treatment, respectively. Among identified compounds in oil under red mud treatments, 17 compounds contributed more than 90% of total volatiles (citral contributing approximately 70%). Under S RM10 treatment, essential oil showed maximum citral content (75.3%). Contents of Fe, Zn, Cu, Cd, Ni and Pb in above-ground plant parts exceeded, whereas Mn was detected within WHO permissible limits for medicinal plants. However, metal contents in essential oil were well within FSSAI limits for food. The study suggests utilization of 5 and 10% red mud in sludge amended soil for lemongrass cultivation to have better oil yield and quality, without metal contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

Geographical variation in total and inorganic arsenic content of polished (white) rice.

Science.gov (United States)

Meharg, Andrew A; Williams, Paul N; Adomako, Eureka; Lawgali, Youssef Y; Deacon, Claire; Villada, Antia; Cambell, Robert C J; Sun, Guoxin; Zhu, Yong-Guan; Feldmann, Joerg; Raab, Andrea; Zhao, Fang-Jie; Islam, Rafiqul; Hossain, Shahid; Yanai, Junta

2009-03-01

An extensive data set of total arsenic analysis for 901 polished (white) grain samples, originating from 10 countries from 4 continents, was compiled. The samples represented the baseline (i.e., notspecifically collected from arsenic contaminated areas), and all were for market sale in major conurbations. Median total arsenic contents of rice varied 7-fold, with Egypt (0.04 mg/kg) and India (0.07 mg/kg) having the lowest arsenic content while the U.S. (0.25 mg/kg) and France (0.28 mg/kg) had the highest content. Global distribution of total arsenic in rice was modeled by weighting each country's arsenic distribution by that country's contribution to global production. A subset of 63 samples from Bangladesh, China, India, Italy, and the U.S. was analyzed for arsenic species. The relationship between inorganic arsenic contentversus total arsenic contentsignificantly differed among countries, with Bangladesh and India having the steepest slope in linear regression, and the U.S. having the shallowest slope. Using country-specific rice consumption data, daily intake of inorganic arsenic was estimated and the associated internal cancer risk was calculated using the U.S. Environmental Protection Agency (EPA) cancer slope. Median excess internal cancer risks posed by inorganic arsenic ranged 30-fold for the 5 countries examined, being 0.7 per 10,000 for Italians to 22 per 10,000 for Bangladeshis, when a 60 kg person was considered.

Micro-EDXRF surface analyses of a bronze spear head: Lead content in metal and corrosion layers

International Nuclear Information System (INIS)

Figueiredo, E.; Valerio, P.; Araujo, M.F.; Senna-Martinez, J.C.

2007-01-01

A bronze spear head from Central Portugal dated to Late Bronze Age has been analyzed by non-destructive micro-EDXRF in the metal surface and corrosion layers. The artifact had previously been analyzed using a conventional EDXRF spectrometer having a larger incident beam. The quantification of the micro-EDXRF analyses showed that lead content in corrosion layers can reach values up to four times higher than the content determined in the metal surface. Results obtained with the higher energy incident beam from the EDXRF equipment, although referring mainly to the corrosion layers, seem to suffer some influence from the surface composition of the metallic alloy

ANTIOXIDANT ACTIVITY, TOTAL PHENOLIC AND FLAVONOID CONTENT OF MORINDA CITRIFOLIA FRUIT EXTRACTS FROM VARIOUS EXTRACTION PROCESSES

Directory of Open Access Journals (Sweden)

PRAVEEN K. RAMAMOORTHY

2007-04-01

Full Text Available Soxhlet, Ultrasonic extract of Morinda citrifolia L. fruit and four extracts from high pressure extraction at 10 MPa using ethanol, ethyl acetate as solvent and dried by vacuum oven and spray dryer were analyzed for their antioxidant activity by peroxide value method and diphenylpicrylhydrazyl radical scavenging method. The five extracts along with the reference samples, butylated hydroxyl toluene and tannic acid were further analyzed to determine their total phenolic content by Folin-Ciocalteau method and total flavonoid content by Dowd method. The M. citrifolia extract by high pressure extraction with ethyl acetate as solvent and spray dried was found to exhibit highest antioxidant activity and total flavonoid content. High total phenolic content was determined in the high pressure extract using ethyl acetate as solvent and vacuum dried. It was interesting to note that ultrasonic extract exhibited significant antioxidant activity, total phenolic and flavonoid content. High pressure extracted M. citrifolia in ethanol was found to express lesser values comparatively. The significant difference in activity among the high pressure extracts was found to be due to the polarity of the solvents used for extraction as M. citrifolia fruit contains relatively larger quantity of non-polar antioxidant compounds. It was also found that the drying methods had significant impact on the antioxidant activity, total phenolic and flavonoid content of the extracts.

The Addition of White Turmeric (Curcuma zedoaria Concentrated Base on Quality Antioxidant Activity, Total Phenol, Protein Content and Salt Content of Salted Egg

Directory of Open Access Journals (Sweden)

Mu’addimah Mu’addimah

2017-03-01

Full Text Available The purposes of this research was to determine the effect of Curcuma zedoaria concentrated addition on quality antioxidant activity, total phenols, protein content and salt content of salted egg. The materials were duck’s egg, water, salt, and essence of white turmeric. The method was experiment using Complete Randomized Design (CRD with five treatments and three for replications. The Curcuma zedoaria juice research were divided into P0 (0%, P1 (10%, P2 (20%, P3 (30% and P4 (40%. Data was analyzed using Analysis of Variance (ANOVA and then continued by Duncan’s Multiple Range Test (DMRT, if it was found significant effect among treatmeants. The result showed that the addition of Curcuma zedoaria juice indicated highly significant different effect (P<0.01 on antioxidant activity, protein content and salt content, but significantly effect (P<0.05 on total phenol. The best treatment was the addition of Curcuma zedoaria juice 40% were indicated of antioxidant activity, total phenol, protein content and the salt content was 99.80 mg/g, 0.16%, 9.96%, 2.43% respectively.

Total Phenol amd Flavonoid contents of Crude Extract and Fractions ...

African Journals Online (AJOL)

Phenolic compounds are numerous in plants and are essential part of human diet. Picralima nitida has been extensively used in African folk medicine especially in West Africa. The present study evaluated the total phenolic and flavonoid contents of the extract and fractions of Picralima nitida. The methanol extracts of P.

Relations between variously available fractions of trace metals in the soil and their actual plant-uptake

International Nuclear Information System (INIS)

Bujtas, K.; Csillag, J.

1999-01-01

In a pot experiment, availabilities of Cd, Cr, Ni, Pb, and Zn added to the soil as metal nitrates or as enrichment of sewage sludge were evaluated by comparing concentrations of their total potentially available, presumably plant-available and directly plant-available forms in the soil. At excessively increasing soil contamination, the plant-available concentrations increased more than the total soil contents, thus the relative availabilities of the metals increased. This was reflected in the amounts taken up by the young maize test plants and in the plant/soil transfer factors. Transfer factors calculated for the 'plant-available' soil metal contents depended less on the contamination level than those based on total soil metal contents. Refs. 8 (author)

Water quality in the Tibetan Plateau: Metal contents of four selected rivers

International Nuclear Information System (INIS)

Huang Xiang; Sillanpaeae, Mika; Duo Bu; Gjessing, Egil T.

2008-01-01

The water used by 85% of the Asian population originates in Tibetan Plateau. During April and May of 2006, water samples were collected from four major Asian rivers in the Plateau (i.e. the Salween, Mekong, Yangtze River and Yarlung Tsangpo) and analyzed for Cu, Pb, Zn, Ag, Mo, Cd, Co, Cr, Ni, Li, Mn, Al, Fe, Mg and Hg. The results showed that elements such as Mg were rather high in Tibetan rivers, giving a mean electrical conductance of 36 mS/m. In a few locations, the results also showed relatively high concentrations of Al and Fe (>1 mg/L). However, the concentrations of Cu, Zn, Ag, Cd, and Cr were generally low. Contamination with Pb was identified at a few locations in the Salween and Ni at a few sites in the Yangtze River. - For the first time, total dissolved metal contents in source water of four major Asian rivers were evaluated at the same time

Chromium in marine sediment samples from the Ria de Arousa (Galicia, NW of Spain): analysis of the total content in slurries by ETAAS

International Nuclear Information System (INIS)

Pazos-Capeans, P.; Barciela-Alonso, M.C.; Bermejo-Barrera, A.; Bermejo-Barrera, P.

2004-01-01

The study attempts to measure the total chromium content in sediments of all the Ria de Arousa (Galicia, NW Spain). The method was developed by analysing slurries by electrothermal atomic absorption spectrometry. The metal determination was carried out optimising the electrothermal programme and the concentration of magnesium nitrate as a chemical modifier. What was aimed to be achieved is a general explanation of the chromium content along the estuary because there could be a chromium sink in this marine environment. Results obtained were between 43.4±1.7 μg g -1 and 184.6±26.9 μg g -1 from the end of the Ulla river to the Atlantic Ocean, most of them higher than the background reference levels

Chromium in marine sediment samples from the Ria de Arousa (Galicia, NW of Spain): analysis of the total content in slurries by ETAAS

Energy Technology Data Exchange (ETDEWEB)

Pazos-Capeans, P.; Barciela-Alonso, M.C.; Bermejo-Barrera, A.; Bermejo-Barrera, P

2004-10-25

The study attempts to measure the total chromium content in sediments of all the Ria de Arousa (Galicia, NW Spain). The method was developed by analysing slurries by electrothermal atomic absorption spectrometry. The metal determination was carried out optimising the electrothermal programme and the concentration of magnesium nitrate as a chemical modifier. What was aimed to be achieved is a general explanation of the chromium content along the estuary because there could be a chromium sink in this marine environment. Results obtained were between 43.4{+-}1.7 {mu}g g{sup -1} and 184.6{+-}26.9 {mu}g g{sup -1} from the end of the Ulla river to the Atlantic Ocean, most of them higher than the background reference levels.

Seasonal determination of trace and ultra-trace content in Macrocystis pyrifera from San Jorge Gulf (Patagonia) by Total Reflection X-ray Fluorescence

Science.gov (United States)

Salomone, Vanesa N.; Riera, Marina; Cerchietti, Luciana; Custo, Graciela; Muniain, Claudia

2017-05-01

Seaweed have a great capacity to accumulate heavy metals in their tissues. The chemical characterization of seaweed is important due to their use in environmental monitoring and human or animal food. The aim of the present study was to evaluate the multi-elemental composition of seaweed from San Jorge Gulf (Patagonia, Argentina) by Total Reflection X-ray Fluorescence (TXRF). The elements As, Br, Cu, Cr, Fe, Mn, Ni, Pb, Rb, Sr, V and Zn were seasonally analyzed and quantified in blades of Macrocystis pyrifera. TXRF showed to be a suitable technique for simultaneous multi-element analysis in this kind of samples. The results revealed seasonal variations in the chemical content for some elements; arsenic content was maximum in summer and autumn, iron concentration increased to the winter and zinc concentration was maximum in autumn. The sum of principal micronutrients (Fe + Zn + Mn + Cu) varied between 114 and 171 mg k- 1 g dw. The total As concentration ranged between 36 and 66 mg kg- 1. Lead, nickel and copper were not detected.

Microbial and trace metal content of well water in three rural ...

African Journals Online (AJOL)

Microbial and trace metal content of well water in three rural communities in Bauchi State, Nigeria*. E Ikeh, PN Durfee, RH Glew, R Amato, FJ Frost, DJ Vanderjagt. Abstract. No Abstract. Nigerian Journal of Health and Biomedical Sciences Vol. 5 (2) 2006: 66-70. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT

The Content of Toxic Metals in Agricultural Produce near a Coal Mine: Case Study KCB in Lazarevac, Serbia

Directory of Open Access Journals (Sweden)

Ana Koprivica

2018-03-01

Full Text Available The monitoring and analysis of concentrations of toxic metals (lead and cadmium in soils and crops indicate that farmland in Serbia is generally not polluted, and the quality of soils is naturally good. Such soils are therefore suitable for organic farming. All noted instances of contamination by toxic metals are of a local nature only, and the result of fertilizers and pesticides, municipal waste, exhaust gases, nearby production facilities, smelting plants, mines, tailings ponds, etc. Locations of this type need to be monitored regularly, and the status of the soil and crops assessed. The results presented in this paper place special emphasis on lead and cadmium. In this regard, the sampling of 67 plant foodstuffs that are being grown in Baroševac village, located in the immediate vicinity of the Kolubara coal mine, was carried out. Fruit samples represented 14.9% and vegetable samples 85.1% of the total sample. The heavy metal content (lead/cadmium in seven samples was above the limits prescribed by the Regulations. Overall exposure of the adult population of Baroševac, calculated on the basis of all samples (67 in total, was 0.89 µg lead per kg of body weight per week, representing only 3.5% provisional tolerable weekly intake (PTWI, and 0.46 cadmium per kg of body weight, which amounts to 6.7% PTWI. Both values point to the fact that the risk is low, even in the case of populations with high exposure to these toxic metals. This suggests that sustainable development may be possible in the near future.

Determination of metals by total reflection X-ray fluorescence and evaluation of toxicity of a river impacted by coal mining in the south of Brazil.

Science.gov (United States)

Lattuada, R M; Menezes, C T B; Pavei, P T; Peralba, M C R; Dos Santos, J H Z

2009-04-30

Metal (Fe, Mn, Zn, Ni, Cd, and Pb) concentrations in the region of Criciuma (Brazil), a region impacted by coal mining, were determined in water and sediments using total reflection X-ray fluorescence (TXRF) spectroscopy. Samples were collected from the Mãe Luzia River (south Brazil) at five different stations, from the source down to the river mouth (Ararangua estuary). Water and sediment toxicity were also evaluated using bioassays with Daphnia magna as the bioindicator. The metal present in the highest concentrations both in water (1.3-11 mg L(-1)) and in sediments (34-142 mg L(-1)) was iron. Results suggest an influence of coal mining on the aquatic receptors, showing a clear relationship between metal content (mostly Fe) and ecotoxicity.

The effect of bottom sediment supplement on heavy metals content in plants (Zea mays and soil

Directory of Open Access Journals (Sweden)

Baran A.

2013-04-01

Full Text Available Important aspect of bottom sediments is the problem of their management or disposal after their extraction from the bottom of rivers, dam reservoirs, ports, channels or ponds. The research aimed at an assessment of potential environmental management of bottom sediment used as an admixture to light soil basing on its effect on contents of heavy metals in plants and soil. The research was conducted on light soil with granulometric structure of weakly loamy sand. The bottom sediment was added to light soil in the amount of 0 (control 5, 10, 30 i 50%. The test plant was maize (Zea mays, “Bora” c.v. The sediment applied in the presented research revealed high share of silt and clay fractions, alkaline pH and low contents of heavy metals, therefore it may be used as an admixture to the above mentioned soils to improve their productivity. The applied bottom sediment to the soil affected a decreased in Zn, Cd and Pb content in maize in comparison with the treatment without the deposit whereas increased content of Cu, Cr and Ni. No exceeded permissible content of heavy metals concerning plant assessment in view of their forage usability were registered in maize biomass.

A study on total phenolics and vitamin c contents of kalecik karasi (vitis vinifera l.) clones

International Nuclear Information System (INIS)

Keskin, N.; Keskin, S.

2014-01-01

In this study total phenolic and vitamin C contents of the fully ripe berries of 23 clones of Kalecik Karasi which is one of the leading Turkish local red-wine grape cultivar originally grown in Kizilirmak valley near Kalecik/Ankara region were examined under the clone selection project supported by TUBTAK (Project Nr: 107 O 731). High-pressure liquid chromatography (HPLC) was used for vitamin C and spectrophotometer for total phenolics estimation. One way ANOVA was used to compare means of clone for their total phenolic and vitamin C contents. In addition to this univariate method, hierarchical cluster analysis was performed to identify similarity levels among the clones by considering total phenolics and vitamin C content together. Differences among the clones were found statistically significant for both characteristics. Total phenolic contents of the clones varied from 3.310 mg (clone 21) to 3.389 mg (clone 6) as GAE g fw. Vitamin C content ranged from 14.010 mg (clone 6) to 16.500 mg (clone 19) in 100g fw. Furthermore, similarity level for all clones was 83.1% that means variation rate is about 17% among the clones. As a summary of whole data, the first three performing clones are 6 (3.389 mg), 10 (3.374 mg) and 1 (3.365 mg) for total phenolics, and 19 (16.500 mg), 9 (16.020 mg), and 21 (16.015 mg) for vitamin C contents of the berries. (author)

Quantitative analysis of total starch content in wheat flour by reaction headspace gas chromatography.

Science.gov (United States)

Xie, Wei-Qi; Gong, Yi-Xian; Yu, Kong-Xian

2017-09-01

This paper proposed a new reaction headspace gas chromatographic (HS-GC) method for efficiently quantifying the total starch content in wheat flours. A certain weight of wheat flour was oxidized by potassium dichromate in an acidic condition in a sealed headspace vial. The results show that the starch in wheat flour can be completely transferred to carbon dioxide at the given conditions (at 100 °C for 40 min) and the total starch content in wheat flour sample can be indirectly quantified by detecting the CO 2 formed from the oxidation reaction. The data showed that the relative standard deviation of the reaction HS-GC method in the precision test was less than 3.06%, and the relative differences between the new method and the reference method (titration method) were no more than 8.90%. The new reaction HS-GC method is automated, accurate, and can be a reliable tool for determining the total starch content in wheat flours in both laboratory and industrial applications. Graphical abstract The total starch content in wheat flour can be indirectly quantified by the GC detection of the CO 2 formed from the oxidation reaction between wheat flour and potassium dichromate in an acidic condition.

Total polyphenols contents in different grapevine varieties in highlands of southern brazil

Directory of Open Access Journals (Sweden)

Brighenti Emilio

2017-01-01

Full Text Available Phenolic compounds are one of the main parameters of wine quality and contribute to the organoleptic characteristics, particularly color, astringency and body. In the highlands of southern Brazil, low temperatures and high accumulation of global solar radiation favor the synthesis of total polyphenols in grapes. The objective of this work was to evaluate the concentration of total polyphenols of 10 white varieties and 13 red varieties produced in high altitude regions of southern Brazil. The vineyard is located in the Experimental Station of Santa Catarina State Agricultural Research and Rural Extension Agency (EPAGRI, in the city of São Joaquim (28° 16′30″S, 49° 56′09″W, Altitude 1,400 m, the evaluations occurred in 2015/2016 growing season. The content of total polyphenols was determined as proposed by Singleton & Rossi (1965, using the Folin-Ciocalteu method, with spectrophotometer readings. Polyphenol content ranged from 283.56 to 1,387.31 mg/L for white varieties, the varieties with the highest concentrations were Greco di Tufo (1,378.31 mg/L, Trebbiano Toscano (995.59 mg/L and Ribola Gialla (737.48 mg/L. For the red varieties, the total polyphenol content ranged from 523.87 to 4,929.57 mg/L, Ancellotta (4,929.57 mg/L, Uva di Troia (2,722.27 mg/L and Croatina (2,410 mg/L stood out for presenting the highest levels.

Heavy metals in fish tissues/stomach contents in four marine wild commercially valuable fish species from the western continental shelf of South China Sea.

Science.gov (United States)

Gu, Yang-Guang; Lin, Qin; Huang, Hong-Hui; Wang, Liang-Gen; Ning, Jia-Jia; Du, Fei-Yan

2017-01-30

The concentrations of heavy metals (Cd, Pb, Cr, Ni, Cu and Zn) were determined in four commercially valuable fish species (Thunnus obesus, Decapterus lajang, Cubiceps squamiceps and Priacanthus macracanthus), collected in the western continental shelf of the South China Sea. Concentrations of Cd, Pb, Cr, Ni, Cu, and Zn in fish muscles were 0.006-0.050, 0.13-0.68, 0.18-0.85, 0.11-0.25, 0.12-0.77, and 2.41-4.73μg/g, wet weight, respectively. Concentrations of heavy metals in all species were below their acceptable daily upper limit, suggesting human consumption of these wild fish species may be safe, with health risk assessment based on the target hazard quotients (THQ) and total THQ, indicating no significant adverse health effects with consumption. The average concentrations of Zn were higher in gills than in stomach contents, backbones or muscle, while conversely, the other heavy metals had higher concentrations in stomach contents than in other tissues. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pseudotumor from Metal-on-Metal Total Hip Arthroplasty Causing Unilateral Leg Edema: Case Presentation and Literature Review

Directory of Open Access Journals (Sweden)

Caleb W. Grote

2018-03-01

Full Text Available Metal-on-metal (MoM total hip arthroplasty (THA can be associated with adverse metal reactions, including pseudotumors. This case report describes a 58-year-old female with an MoM THA-related pseudotumor that caused unilateral leg edema from compression of her external iliac vein. After thorough preoperative workup to rule out infection and deep vein thrombosis and consultation with a vascular surgeon, the patient underwent revision THA and excision of her pseudotumor. She had complete resolution of her swelling at 4 years after surgery. Review of all available case reports for this rare complication revealed that almost all patients were female. All patients underwent revision THA, with resolution of their symptoms. Literature review demonstrates that women are disproportionally affected by complications associated with MoM THA. We recommend close monitoring of patients with MoM THA, particularly women, for development of adverse metal reactions.

Effect of nickel content on mechanical properties and fracture toughness of weld metal of WWER-1000 reactor vessel welded joints

International Nuclear Information System (INIS)

Zubchenko, A.S.; Vasilchenko, G.S.; Starchenko, E.G.; Nosov, S.I.

2004-01-01

Welding of WWER-1000 reactor vessel of steel 15X2HMPHIA is performed using the C B -12X2H2MAA wire and PHI-16 or PHI-16A flux. Nickel content in the weld metal usually lays within the limits 1.2-1.9%. The experimental data is shown on the weld metal with the nickel contents 1.28-2.45% after irradiation with fluence up to 260.10 22 n/m 2 at energy more than 0.5 MEV. The embrittlement was measured by shift of critical brittleness temperature. Has appeared, that the weld metal with the low nickel content is the least responsive to irradiation embrittlement. The mechanical properties and fracture toughness of the weld metal with the contents of a nickel less than 1.3% are studied. Specimens CT-1T are tested, the 'master-curve', and its confidence bounds with probability of destruction 5 and 95% is built. 'Master-curve' in the specified confidence interval is affirmed by CT-4T specimens test data. Is shown, that the mechanical properties and fracture toughness of the weld metal with the contents of nickel less than 1.3% satisfy the normative requirements

Study on the prediction of soil heavy metal elements content based on visible near-infrared spectroscopy.

Science.gov (United States)

Liu, Jinbao; Zhang, Yang; Wang, Huanyuan; Du, Yichun

2018-06-15

The estimation of soils heavy metal content can reflect the impending surroundings of surface, which lays theoretical foundation for using covered vegetation to monitor environment and investigate resource. In this study, the contents of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb in 44 soil samples were collected from Fufeng County, Yangling County and Wugong County, Shaanxi Province and were used as data sources. ASD FieldSpec HR (350-2500nm), and then the NOR, MSC and SNV of the reflectance were pretreated, the first deviation, second deviation and reflectance reciprocal logarithmic transformation were carried out. The optimal spectroscopy estimation model of nine heavy metal elements of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb was established by regression method. Comparing the diffuse reflectance characteristics of different heavy metal contents and the effect of different pretreatment methods on the establishment of soil heavy metal spectral inversion model. The results of chemical analysis show that there was a serious Hg pollution in the study area, and the Cd content was close to the critical value. The results show that: (1) NOR, MSC and SNV were adopted for the acquisition of visible near-infrared. Combining differential transformation can improve the information of heavy metal elements in the soil, and use the correlation band energy Significantly improve the stability and predictability of the model. (2) The modeling accuracy of the optimal model of nine heavy metal spectra of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb by PLSR method were 0.70, 0.79, 0.69, 0.81, 0.86, 0.58, 0.55, 0.99, 0.62. (3) The optimal estimation model of different elements using different treatment methods has better stability and higher precision, and can realize the rapid prediction of nine kinds of heavy metal elements in this region. Copyright © 2018 Elsevier B.V. All rights reserved.

Examinations of content of heavy metals in municipal solid waste and produced compost

International Nuclear Information System (INIS)

Golimowski, J.; Tykarska, A.; Orzechowska, K.

1993-01-01

The basic methods of utilization of municipal solid waste are biothermic and aerobic methods to compost. The content of heavy metals in composts depends on the initial their content in wastes as well as on the compost process. The voltammetric method has been applied for measurement of concentration of Zn, Cd, Pb, Cu, Cr, Ni and Hg in the waste and composts samples. (author). 24 refs, 2 figs, 3 tabs

Pseudotumour incidence, cobalt levels and clinical outcome after large head metal-on-metal and conventional metal-on-polyethylene total hip arthroplasty MID-TERM RESULTS OF A RANDOMISED CONTROLLED TRIAL

NARCIS (Netherlands)

van der Veen, H. C.; Reininga, I. H. F.; Zijlstra, W. P.; Boomsma, M. F.; Bulstra, S. K.; van Raay, J. J. A. M.

2015-01-01

We compared the incidence of pseudotumours after large head metal-on-metal (MoM) total hip arthroplasty (THA) with that after conventional metal-on-polyethylene (MoP) THA and assessed the predisposing factors to pseudotumour formation. From a previous randomised controlled trial which compared large

Total Oil Content and Fatty Acid Profile of some Almond (Amygdalus Communis L. Cultivars

Directory of Open Access Journals (Sweden)

Yildirim Adnan Nurhan

2016-07-01

Full Text Available This study was conducted to determine the total oil contents and fatty acid compositions of some commercial almond cultivars. The total oil contents changed significantly (p<0.05 by year in all cultivars with the exception of cultivar Ferrastar. Total oil contents were changed from 50.90% (Picantili to 62.01% (Supernova in 2008 and from 52.44% (Lauranne to 63.18% (Cristomorto in 2009. While predominant unsaturated fatty acids were oleic and linoleic acids, predominant saturated fatty acid was palmitic acid. The highest amount of oleic acid was obtained in Glorieta in both 2008 (83.35% and 2009 (72.74%. Linoleic acid content varied by year and the highest content was recorded in Picantili (26.08% in 2008 and Yaltinski (30.01% in 2009. The highest amount of palmitic acid was detected in cultivar Sonora in both years, i.e. as 7.76% in 2008 and 10.11% in 2009. The mean UFA:SFA ratio was 11.73 in 2008 but 7.59 in 2009. Principal component (PC analysis indicated that palmitic acid, palmitoleic acid, stearic acid, oleic acid, arachidic acid, unsaturated fatty acid (UFA, saturated fatty acid (SFA and UFA:SFA ratio were primarily responsible for the separation on PC1

Content and the forms of heavy metals in bottom sediments in the zone of industrial pollution sources ,

Directory of Open Access Journals (Sweden)

Voytyuk Y.Y.

2014-12-01

Full Text Available Regularities in the distribution of heavy metals in sediments in the zone of influence of the steel industry in Mariupol are installed. The study results of the forms of occurrence of Zn, Pb, Cu, Cr, Ni are represented. Ecological and geochemical assessment of sediment contamination by heavy metals is performed. The main sources of pollution of bottom sediments are air borne emissions from industrial plants, hydrogenous pollution in industrial sewage entering the water, sewage sludge, ash dumps, slag, ore, sludge, oil spills and salt solutions. Pollution hydrogenous sediments may be significant, contaminated sediments are a source of long-term contamination of water, even after cessation of discharges into rivers untreated wastewater. The environmental condition of bottom sediments in gross content of heavy metals is little information because they do not reflect the transformation and further migration to adjacent environment. The study forms of giving objective information for ecological and geochemical evaluation. The study forms of heavy metals in the sediments carried by successive extracts. Concentrations of heavy metals in the extracts determined by atomic absorption spectrometer analysis CAS-115. It was established that a number of elements typical of exceeding their content in bottom sediments of the background values, due likely to their technogenic origin. Man-made pollution of bottom sediments. Mariupol has disrupted the natural form of the ratio of heavy metals. In the studied sediments form ion exchange increased content of heavy metals, which contributes to their migration in the aquatic environment.

40 CFR 60.4360 - How do I determine the total sulfur content of the turbine's combustion fuel?

Science.gov (United States)

2010-07-01

... content of the turbine's combustion fuel? 60.4360 Section 60.4360 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Monitoring § 60.4360 How do I determine the total sulfur content of the turbine's combustion fuel? You must monitor the total sulfur content of the...

Effect of organosolv and soda pulping processes on the metals content of non-woody pulps.

Science.gov (United States)

González, M; Cantón, L; Rodríguez, A; Labidi, J

2008-09-01

In this work the effect of different pulping processes (ethyleneglycol, diethyleneglycol, ethanolamine and soda) of tow abounded raw materials (empty fruit bunches - EFB and rice straw) on the ash, silicates and metals (Fe, Zn, Cu, Pb, Mn, Ni and Cd) content of the obtained pulps have been studied. Results showed that pulps obtained by diethyleneglycol pulping process presented lower metals content (756 microg/g and 501 microg/g for EFB and rice straw pulp, respectively) than soda pulps (984 microg/g and 889 microg/g). Ethanolamine pulps presented values of holocellulose (74% and 77% for EFB and rice straw pulp, respectively), alpha-cellulose (74% and 69%), kappa number (18.7 and 18.5) and viscosity (612 and 90 6ml/g) similar to those of soda pulp, and lower lignin contents (11% and 12%).

Glassy slags as novel waste forms for remediating mixed wastes with high metal contents

International Nuclear Information System (INIS)

Feng, X.; Wronkiewicz, D.J.; Bates, J.K.; Brown, N.R.; Buck, E.C.; Gong, M.; Ebert, W.L.

1994-01-01

Argonne National Laboratory (ANL) is developing a glassy slag final waste form for the remediation of low-level radioactive and mixed wastes with high metal contents. This waste form is composed of various crystalline and metal oxide phases embedded in a silicate glass phase. This work indicates that glassy slag shows promise as final waste form because (1) it has similar or better chemical durability than high-level nuclear waste (HLW) glasses, (2) it can incorporate large amounts of metal wastes, (3) it can incorporate waste streams having low contents of flux components (boron and alkalis), (4) it has less stringent processing requirements (e.g., viscosity and electric conductivity) than glass waste forms, (5) its production can require little or no purchased additives, which can result in greater reduction in waste volume and overall treatment costs. By using glassy slag waste forms, minimum additive waste stabilization approach can be applied to a much wider range of waste streams than those amenable only to glass waste forms

Study of aluminum content in a welding metal by thermoelectric measurements

Science.gov (United States)

Carreón, H.; Ramirez, S.; Coronado, C.; Salazar, M.

2018-03-01

This work investigates the effect caused by the aluminum content in a welding metal and its variation in mechanical properties through the use of a non-destructive thermoelectric technique. It is known that aluminum has positive effects as deoxidizer in low percentages and alloying element together with Niobium and Vanadium. Aluminum has a positive and negative effect, initially improves the mechanical properties of the metal, as it acts as a grain refiner, increasing the yield strength, but in larger quantities, important mechanical properties such as hardness and toughness are seriously affected. For this purpose, HSLA ASTM 572 Gr. 50 steel was used as the base metal, where the weld metal was deposited, after which the specimens were fabricated and the mechanical tests and non-destructive tests were carried out. The sensitivity of the thermoelectric potential technique to microstructural and chemical composition changes was confirmed. The evolution of absolute thermoelectric potential (TEP) values with respect to the percentage of aluminum added to the weld was observed, being also quite sensitive to defects such as micro-cracks.

Evaluation of Wet Digestion Methods for Quantification of Metal Content in Electronic Scrap Material

Directory of Open Access Journals (Sweden)

Subhabrata Das

2017-11-01

Full Text Available Recent advances in the electronics sector and the short life-span of electronic products have triggered an exponential increase in the generation of electronic waste (E-waste. Effective recycling of E-waste has thus become a serious solid waste management challenge. E-waste management technologies include pyrometallurgy, hydrometallurgy, and bioleaching. Determining the metal content of an E-waste sample is critical in evaluating the efficiency of a metal recovery method in E-waste recycling. However, E-waste is complex and of diverse origins. The lack of a standard digestion method for E-waste has resulted in difficulty in comparing the efficiencies of different metal recovery processes. In this study, several solid digestion protocols including American Society for Testing and Materials (ASTM-D6357-11, United States Environment Protection Agency Solid Waste (US EPA SW 846 Method 3050b, ultrasound-assisted, and microwave digestion methods were compared to determine the metal content (Ag, Al, Au, Cu, Fe, Ni, Pb, Pd, Sn, and Zn of electronic scrap materials (ESM obtained from two different sources. The highest metal recovery (mg/g of ESM was obtained using ASTM D6357-11 for most of the metals, which remained mainly bound to silicate fractions, while a microwave-assisted digestion protocol (MWD-2 was more effective in solubilizing Al, Pb, and Sn. The study highlights the need for a judicious selection of digestion protocol, and proposes steps for selecting an effective acid digestion method for ESM.

Heavy metal contents in the sediments of astatic ponds: Influence of geomorphology, hydroperiod, water chemistry and vegetation.

Science.gov (United States)

Gołdyn, Bartłomiej; Chudzińska, Maria; Barałkiewicz, Danuta; Celewicz-Gołdyn, Sofia

2015-08-01

The contents of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn) were analysed in the bottom sediments of 30 small, astatic ponds located in the agricultural landscape of Western Poland. The samples were collected from 118 stations located in patches of four vegetation types. Relationships between the contents of particular elements and four groups of factors (geomorphology, hydroperiod, water quality and vegetation) were tested using Redundancy Analysis (RDA). The most important factors influencing the heavy metal contents were the maximum depth and area of the pond, its hydroperiod, water pH and conductivity values. In general, low quantities of heavy metals were recorded in the sediments of kettle-like ponds (small but located in deep depressions) and high in water bodies of the shore-bursting type (large but shallow). Moreover, quantities of particular elements were influenced by the structure of the vegetation covering the pond. Based on the results, we show which types of astatic ponds are most exposed to contamination and suggest some conservation practices that may reduce the influx of heavy metals. Copyright © 2015 Elsevier Inc. All rights reserved.

Non-destructive Measurement of Total Carotenoid Content in Processed Tomato Products

NARCIS (Netherlands)

Bicanic, D.; Streza, M.; Dóka, O.; Valinger, D.; Luterotti, S.; Ajtony, Zs; Kurtanjek, Z.; Dadarlat, D.

2015-01-01

Carotenes found in a diversity of fruits and vegetables are among important natural antioxidants. In a study described in this paper, the total carotenoid content (TCC) in seven different products derived from thermally processed tomatoes was determined using laser photoacoustic spectroscopy

Effect of cold storage on total phenolics content, antioxidant activity and vitamin C level of selected potato clones.

Science.gov (United States)

Külen, Oktay; Stushnoff, Cecil; Holm, David G

2013-08-15

Twelve Colorado-grown specialty potato clones were evaluated for total phenolic content, antioxidant activity and ascorbic acid content at harvest and after 2, 4, 6 and 7 months cold storage at 4 °C. Potato clones were categorized as pigmented ('CO97226-2R/R', 'CO99364-3R/R', 'CO97215-2P/P', 'CO97216-3P/P', 'CO97227-2P/P', 'CO97222-1R/R', 'Purple Majesty', 'Mountain Rose' and 'All Blue'), yellow ('Yukon Gold') and white fleshed ('Russet Nugget', 'Russet Burbank'). Folin-Ciocalteu reagent was used to estimate total phenolic content, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS(•+) ) and 2,2-diphenyl-1-picrylhydrazyl (DPPH(•) ) radical scavenging assays were used to estimate antioxidant capacity. Pigmented potato genotypes had significantly higher total phenolic content and antioxidant activity at all data points than yellow- and white-fleshed cultivars. Vitamin C content was higher in 'Yukon Gold' than in the other clones. The highest level of vitamin C in all clones was at harvest and after 2 months in cold storage. Vitamin C content in all potato clones dropped rapidly with longer intervals of cold storage. Although total phenolic content and antioxidant activity fluctuated during cold storage, after 7 months of cold storage their levels were slightly higher than at harvest. Total phenolic content was better correlated with Trolox equivalent antioxidant capacity (TEAC)/ABTS(•+) than the TEAC/DPPH(•) radical scavenging assay. Pigmented potato clones had significantly higher total phenolic content and antioxidant activity, while the yellow-fleshed potato cultivar 'Yukon Gold' had significantly higher vitamin C content. Vitamin C content decreased in all potato clones during cold storage, while total phenolics increased in pigmented clones. © 2013 Society of Chemical Industry.

Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals

Science.gov (United States)

Mao, Gaojun; Cao, Rui; Yang, Jun; Jiang, Yong; Wang, Shuai; Guo, Xili; Yuan, Junjun; Zhang, Xiaobo; Chen, Jianhong

2017-05-01

Multi-pass weld metals were deposited on Q345 base steel using metal powder-flux-cored wire with various Ni contents to investigate the effects of the Ni content on the weld microstructure and property. The types of the microstructures were identified by optical microscope, scanning electron microscope, transmission electron microscope, and micro-hardness tests. As a focusing point, the lath bainite and lath martensite were distinguished by their compositions, morphologies, and hardness. In particular, a number of black plane facets appearing between lath bainite or lath martensite packets were characterized by laser scanning confocal microscope. The results indicated that with the increase in Ni contents in the range of 0, 2, 4, and 6%, the microstructures in the weld-deposited metal were changed from the domination of the granular bainite to the majority of the lath bainite and/or the lath martensite and the micro-hardness of the weld-deposited metal increased. Meanwhile, the average width of columnar grain displays a decreasing trend and prior austenite grain size decreases while increases with higher Ni content above 4%. Yield strength and ultimate tensile strength decrease, while the reduction in fracture area increases with the decreasing Ni mass fraction and the increasing test temperature, respectively. And poor yield strength in Ni6 specimen can be attributed to elements segregation caused by weld defect. Finally, micro-hardness distribution in correspondence with specimens presents as a style of cloud-map.

Heavy metal content of lichens in relation to distance from a nickel smelter in Sudbury, Ontario

Energy Technology Data Exchange (ETDEWEB)

Nieboer, E; Ahmed, H M; Puckett, K J; Richardson, D H.S.

1972-01-01

The Sudbury region of Ontario has large deposits of nickel, iron, and copper, and thus a number of smelting plants which produce sulfur dioxide and heavy metal pollution. Since lichens are good indicators of SO/sub 2/ pollution levels, the pattern of heavy metal content in lichen species in the area of a copper smelter in Sudbury was correlated with distance from the smelter to ascertain whether lichens might also be good indicators of the amount of heavy metal fallout. The lichens were analyzed qualitatively and quantitatively. All seven species of lichens contained copper, iron, zinc, nickel, manganese, and lead. Cadmium and cobalt were detected in two species. Neither gold nor silver could be identified in lichen material with the tests used. A pollution model was developed and compared to field results. The simple dilution of the stack effluent was consistent with the fact that the lichen metal content was related to the reciprocal of the distance from the pollution source. The lichens from the area could tolerate simultaneously high concentrations of several heavy metals that are known to be toxic to other plants. The mechanism of metal uptake was not clearly established. The study showed that lichens and other epiphytes are potentially the most useful indicators of heavy metal fallout around industrial plants.

A city scale study on the effects of intensive groundwater heat pump systems on heavy metal contents in groundwater.

Science.gov (United States)

García-Gil, Alejandro; Epting, Jannis; Garrido, Eduardo; Vázquez-Suñé, Enric; Lázaro, Jesús Mateo; Sánchez Navarro, José Ángel; Huggenberger, P; Calvo, Miguel Ángel Marazuela

2016-12-01

As a result of the increasing use of shallow geothermal resources, hydraulic, thermal and chemical impacts affecting groundwater quality can be observed with ever increasing frequency (Possemiers et al., 2014). To overcome the uncertainty associated with chemical impacts, a city scale study on the effects of intensive geothermal resource use by groundwater heat pump systems on groundwater quality, with special emphasis on heavy metal contents was performed. Statistical analysis of geochemical data obtained from several field campaigns has allowed studying the spatiotemporal relationship between temperature anomalies in the aquifer and trace element composition of groundwater. The relationship between temperature and the concentrations of trace elements resulted in weak correlations, indicating that temperature changes are not the driving factor in enhancing heavy metal contaminations. Regression models established for these correlations showed a very low reactivity or response of heavy metal contents to temperature changes. The change rates of heavy metal contents with respect to temperature changes obtained indicate a low risk of exceeding quality threshold values by means of the exploitation regimes used, neither producing nor enhancing contamination significantly. However, modification of pH, redox potential, electrical conductivity, dissolved oxygen and alkalinity correlated with the concentrations of heavy metals. In this case, the change rates of heavy metal contents are higher, with a greater risk of exceeding threshold values. Copyright © 2016 Elsevier B.V. All rights reserved.

Selected Heavy Metal Content in Ultra basic Soil and Mengkudu (Morinda citrifolia) from Kuala Pilah, Negeri Sembilan, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Wan Mohd Razi Idris; Zulfahmi Ali Rahman; Kadderi Mohd Desa; Tukimat Lihan; Azman Hashim; Sharilnizam Yusof; Kuan, L.H.

2009-01-01

This study was carried out at an ultra basic area, Selaru (S1 and S2) dan Felda Rokan Barat (S3), Kuala Pilah, Negeri Sembilan. Eighteen samples of plant and their substrates were collected from study area. The purpose of this study was to determine heavy metal such as Ni, Cr, Mn, Co, Fe and Zn contents in soils and different parts of the plant, such as leaf, stem, root and fruit. Biologal Absorption Coefficient (BAC) of the plant was obtained by calculation. Heavy metals content in the plant were extracted by digestion method whereas in soil the heavy metals were extracted by sequential extraction. Heavy metals content in soil and plant extract was determined using Flame Atomic Absorption Spectrophotometer. It was found that heavy metal concentrations in soil substrate for mengkudu (Morinda citrifolia) were high for Fe followed by Cr, Ni, Mn, Zn and Co with average concentration of 1208.5, 583.4, 352.4, 352.4, 70.7 and 53.6 mg.kg -1 , respectively. Available Mn and Zn concentrations were higher than the other heavy metals in term of percentage. Fe and Mn were dominant in all parts of plants however in terms of BAC average, Co showed the highest enrichment value in all parts of the plants. (author)

Riboflavin content of coelomocytes in earthworm (Dendrodrilus rubidus) field populations as a molecular biomarker of soil metal pollution

International Nuclear Information System (INIS)

Plytycz, Barbara; Lis-Molenda, Urszula; Cygal, Malgorzata; Kielbasa, Edyta; Grebosz, Anna; Duchnowski, Michal; Andre, Jane; Morgan, A. John

2009-01-01

The effect of Pb + Zn on coelomocyte riboflavin content in the epigeic earthworm Dendrodrilus rubidus inhabiting three metalliferous soils and one reference soil was measured by flow cytometry and spectrofluorimetry. A reciprocal polluted↔unpolluted worm transfer experiment (4-week exposure) was also performed. High proportions of autofluorescent eleocytes were counted in worms from all localities, but intense riboflavin-derived autofluorescence was detectable only in reference worm eleocytes. Other findings were: (i) fluorophore(s) other than riboflavin is/are responsible for eleocyte autofluorescence in residents of metalliferous soils; (ii) riboflavin content was reduced in the eleocytes of worms transferred from unpolluted to metal-polluted soil; (iii) the riboflavin content of D. rubidus eleocytes is a promising biomarker of exposure; (iv) COII mitochondrial genotyping revealed that the reference population is genetically distinct from the three mine populations; (v) metal exposure rather than genotype is probably the main determinant of inter-population differences in eleocyte riboflavin status. - Soil metal pollution reduces riboflavin content of earthworm eleocytes.

Riboflavin content of coelomocytes in earthworm (Dendrodrilus rubidus) field populations as a molecular biomarker of soil metal pollution

Energy Technology Data Exchange (ETDEWEB)

Plytycz, Barbara, E-mail: barbara.plytycz@uj.edu.p [Institute of Zoology, Jagiellonian University, Ingardena 6, PL 30-060 Krakow (Poland); Lis-Molenda, Urszula; Cygal, Malgorzata; Kielbasa, Edyta; Grebosz, Anna [Institute of Zoology, Jagiellonian University, Ingardena 6, PL 30-060 Krakow (Poland); Duchnowski, Michal [Institute of Environmental Sciences, Jagiellonian University, Krakow (Poland); Andre, Jane; Morgan, A. John [Cardiff School of Biosciences, Main Building, Cardiff University, Cardiff CF10 3TL, Wales (United Kingdom)

2009-11-15

The effect of Pb + Zn on coelomocyte riboflavin content in the epigeic earthworm Dendrodrilus rubidus inhabiting three metalliferous soils and one reference soil was measured by flow cytometry and spectrofluorimetry. A reciprocal pollutedreversibleunpolluted worm transfer experiment (4-week exposure) was also performed. High proportions of autofluorescent eleocytes were counted in worms from all localities, but intense riboflavin-derived autofluorescence was detectable only in reference worm eleocytes. Other findings were: (i) fluorophore(s) other than riboflavin is/are responsible for eleocyte autofluorescence in residents of metalliferous soils; (ii) riboflavin content was reduced in the eleocytes of worms transferred from unpolluted to metal-polluted soil; (iii) the riboflavin content of D. rubidus eleocytes is a promising biomarker of exposure; (iv) COII mitochondrial genotyping revealed that the reference population is genetically distinct from the three mine populations; (v) metal exposure rather than genotype is probably the main determinant of inter-population differences in eleocyte riboflavin status. - Soil metal pollution reduces riboflavin content of earthworm eleocytes.

Effect of nickel content on mechanical properties and fracture toughness of weld metal of WWER-1000 reactor vessel welded joints

Energy Technology Data Exchange (ETDEWEB)

Zubchenko, A.S.; Vasilchenko, G.S.; Starchenko, E.G.; Nosov, S.I

2004-08-01

Welding of WWER-1000 reactor vessel of steel 15X2HMPHIA is performed using the C{sub B}-12X2H2MAA wire and PHI-16 or PHI-16A flux. Nickel content in the weld metal usually lays within the limits 1.2-1.9%. The experimental data is shown on the weld metal with the nickel contents 1.28-2.45% after irradiation with fluence up to 260.10{sup 22}n/m{sup 2} at energy more than 0.5 MEV. The embrittlement was measured by shift of critical brittleness temperature. Has appeared, that the weld metal with the low nickel content is the least responsive to irradiation embrittlement. The mechanical properties and fracture toughness of the weld metal with the contents of a nickel less than 1.3% are studied. Specimens CT-1T are tested, the 'master-curve', and its confidence bounds with probability of destruction 5 and 95% is built. 'Master-curve' in the specified confidence interval is affirmed by CT-4T specimens test data. Is shown, that the mechanical properties and fracture toughness of the weld metal with the contents of nickel less than 1.3% satisfy the normative requirements.

Determination of total Betta-activity and heavy metals in biomonitor species (phytomonitors) from the area of ITR-Sofia

International Nuclear Information System (INIS)

Dimitrov, S.; Yovchev, M.; Geleva, E.

2010-01-01

For the purposes of environmental assessment of the area around the Research reactor in Sofia, species from monitored control points, selected in a certain way (habitat, population, air and hydrogeological parameters) are examined. Samples from following phytomonitored species: Betula pendula (silver birch) popullus canadensis (Canadian populus), Quercus sp. (Oak), Dactilus glomerata (Cock's-foot), Abies alba (Silver Fir) and Sequoia sempervirens (Coast Redwood) were analyzed. The total beta activity was determined by radiometric analysis and heavy metals content was measured using X-ray fluorescence analysis. The results are discussed in terms of radiation monitoring program of INRNE (gamma-background, aerosols, surface and groundwater, soil, plants) and obtained values are compared with reference points in the country

Metal Content and Stable Isotope Determination in Some Commercial Beers from Romanian Markets

Directory of Open Access Journals (Sweden)

Cezara Voica

2015-01-01

Full Text Available Characterization of beer samples is of interest because their compositions affect the taste and stability of beer and, also, consumer health. In this work, the characterizations of 20 Romanian beers were performed by mean of Inductively Coupled Plasma Mass Spectrometry (ICP-MS and Isotope Ratio Mass Spectrometry (IRMS in order to trace heavy metals and isotopic content of them. Major, minor, and trace metals are important in beer fermentation since they supply the appropriate environment for yeast growth and influence yeast metabolism. Beside this, the presence of the C4 plants in the brewing process was followed. Our study has shown that the analyzed beers indicated the presence of different plant types used in brewing: C3, C3-C4 mixtures, and also C4, depending on producers. Also the trace metal content of each sample is presented and discussed in this study. A comparison of the beers quality manufactured by the same producer but bottled in different type of packaging like glass, dose, or PET was made; our results show that no compositional differences among the same beer type exist.

Measurement of thyroid volume, iodine concentration and total iodine content by CT and its clinical significance

International Nuclear Information System (INIS)

Nakaji, Shunsuke; Imanishi, Yoshimasa; Okamoto, Kyouko; Shinagawa, Toshihito

2007-01-01

Recently, Imanishi et al have developed new CT software for quantitative in vivo measurement of thyroid iodine. Using a CT system with the software, we measured volume, iodine concentration and total iodine content of thyroids in 63 controls and 435 patients with various diffuse thyroid diseases and thyroid nodules. In controls, all of them showed no difference between the sexes. Although the iodine concentration of the thyroid showed no difference among children, adults and seniles, the volume and total iodine content of the thyroid appeared smaller in children and seniles than in adults. In addition, although the volume and iodine concentration of the thyroid had two peaks in distribution, the total iodine content had almost normal distribution. Normal range of volume, iodine concentration and total iodine content in adults were 5.2-15.5 cm 3 , 0.28831-0.85919 mg/cm 3 and 2.35-11.69 mg, respectively. In thyroid nodule, there is no significant difference in volume, iodine concentration and total iodine content between benign and malignant nodules. All nodules with iodine concentration of less than 0.00007 mg/cm 3 were benign. No thyroid was higher in iodine concentration than the normal range although the thyroid was lower in 78.7% of patients with diffuse thyroid diseases. In all thyroids with increasing iodine concentration and total iodine content in medication course, thyroidal symptoms and signs were uncontrollable by the medication. In 43.8% of patients with long-period systemic diseases, the thyroid showed abnormality in any of the three. We concluded that quantitative in vivo measurement of thyroid iodine by CT could assist the diagnosis of thyroid diseases and decision of therapeutic methods. (author)

Content of heavy metals and naturally occurring radioactive material in Leucaena leucocaphala (Lam.) de wit

International Nuclear Information System (INIS)

Nurul Sareeza Azidin

2012-01-01

This research was done to determine the content of heavy metals in Leucaena leucocaphala (Lam.) de Wit (Petai Belalang) at 5 different areas. Those areas were in the middle of city, former mining area, industrial area, domestic waste disposal area, and on expressway roadside. Heavy metal poisoning can happen if the concentration is too high and will cause severe damage to human health. For instance, it may cause gene mutation, cancer and damage to the human body systems. This plant was selected for the study of heavy metals and radionuclide content in the soil. The reason of selecting this plant is because this plant can live in extreme conditions, and perhaps able to absorb those elements better than other legumes. The aim of this study was to determine the content of toxic heavy metals in leaves, stems and roots of Leucaena leucocaphala including the soil where it is grown. The second objective was determine NORM in the soil where the plant grew and the last objective was to determine the transfer factor of heavy metals by the plant. The content analysis of toxic heavy metals for example Cu, Zn, Cd, Hg and Pb were determined by using the Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Gamma ray spectrometry on the other hand, was used to determine K-40, Ra-226, U-238 and Th-232 in the soil where the plant was sampled. The activity concentration of Ra-226, K-40, U-238 and Th-232 determined were 7.47 ± 3.03 Bq/ kg - 256.92 ± 164.36 Bq/ kg, 95.55 ± 72.62 Bq/ kg - 435.60 ± 88.32 Bq/ kg, 21.83 ± 8.83 Bq/ kg - 165.28 ± 109.61 Bq/ kg dan 43.41 ± 7.06 Bq/ kg - 91.19 ± 11.13 Bq/ kg respectively. In general, the former mining area recorded the highest heavy metal concentration for Cu (28.20 ± 32.54 mg/ kg), Zn (114.67 ± 75,61 mg/ kg), Cd (0.31 ± 0.11 mg/ kg) and Pb (48.08 ± 33.60 mg/ kg). Whereas the highest concentration of As recorded was on the roadside (261.92 ± 132.64) and Hg (0.44 ± 0.36 mg/kg) in the middle of the city. (author)

Method to determine the contents of economically interesting metals in manganese nodules

International Nuclear Information System (INIS)

Michaelis, W.; Fanger, U.; Pepelnik, R.; Mueller, A.

1977-01-01

Metals which are economically important (as copper, nickel) can be determined in manganese nodules by analysing the activating gamma spectra which are measured after neutron irradiation of the samples. Irradiating the samples with fast neutrons and analysing the activity thus reduced with the help of a gamma detector is expected to improve the method. This serves to obtain the ratio of the radiation intensities of two main components (Mu, Fe) and using this, the percental metal content can be determined through known geo-chemical correlation tables and curves. The method is described in detail. (RB) [de

Trace metal depositional patterns from an open pit mining activity as revealed by archived avian gizzard contents.

Science.gov (United States)

Bendell, L I

2011-02-15

Archived samples of blue grouse (Dendragapus obscurus) gizzard contents, inclusive of grit, collected yearly between 1959 and 1970 were analyzed for cadmium, lead, zinc, and copper content. Approximately halfway through the 12-year sampling period, an open-pit copper mine began activities, then ceased operations 2 years later. Thus the archived samples provided a unique opportunity to determine if avian gizzard contents, inclusive of grit, could reveal patterns in the anthropogenic deposition of trace metals associated with mining activities. Gizzard concentrations of cadmium and copper strongly coincided with the onset of opening and the closing of the pit mining activity. Gizzard zinc and lead demonstrated significant among year variation; however, maximum concentrations did not correlate to mining activity. The archived gizzard contents did provide a useful tool for documenting trends in metal depositional patterns related to an anthropogenic activity. Further, blue grouse ingesting grit particles during the time of active mining activity would have been exposed to toxicologically significant levels of cadmium. Gizzard lead concentrations were also of toxicological significance but not related to mining activity. This type of "pulse" toxic metal exposure as a consequence of open-pit mining activity would not necessarily have been revealed through a "snap-shot" of soil, plant or avian tissue trace metal analysis post-mining activity. Copyright © 2010 Elsevier B.V. All rights reserved.

Content of heavy metals and chemical composition of the hydraulic cement marketed in Costa Rica

International Nuclear Information System (INIS)

Venegas Padilla, Jimmy; Calderon Jimenez, Bryan; Sibaja Brenes, Jose Pablo; Salazar Delgado, Jorge; Rodriguez Castro, Ellen

2017-01-01

The concentration of heavy metals, specifically lead (Pb), chromium (Cr), and mercury (Hg), and also the chemical composition (CaO, SiO 2 , Al 2 O 3 , Fe 2 O 3 among others) were quantified of the hydraulic cement marketed in Costa Rica. The physical parameters of density and fineness confirmed the homogeneity of the samples to determinate accurately the content of the major components and heavy metals in the cements. The mineralogical constitution was determined by X-ray Fluorescence (XRF). Specifically, the cements showed a mass fraction in the range of (61.22 - 63.12) % of CaO, (18.10 - 26.14) % of SiO 2 , (3.70 - 6.05) % of Al 2 O 3 , (2.57 - 3.36) % Fe 2 O 3 and (0.60 - 4.09) % de MgO. Other components such as MgO, TiO 2 , K 2 O, P 2 O 5 , Na 2 O and Mn 2 O 3 were found on an average mass fraction lower than 1%. Moreover, using the ignition test results and assuming a complete decomposition of the limestone, it was possible to estimate (indirectly) the content of CaCO 3 and CaO given by the raw materials. The metal content of the heavy metals was determined using Flame Atomic Absorption Spectroscopy (FAAS), Electrothermal Atomic Absorption Spectroscopy (ETAAS), and Cold Vapor Atomic Absorption Spectroscopy (CVAAS). The analysis demonstrated that the Pb in cements is present in different concentrations ranging the (2.45 ± 0.72) mg kg -1 to the (8.95 ± 1.34) mg kg -1 . Chromium (Cr) was presented in higher concentrations of (10.69 ± 0.92) mg kg-1. The Hg concentration was below 0.141 ± 0.021 mg kg -1 . In general terms, the hydraulic cements marketed and used in Costa Rica have a suitable chemical composition compared with some cements marketed in Germany. The results of the content of heavy metals presented in this study provide significant information for future studies in the area of toxicology, ecotoxicology, standardization and national regulation. (author) [es

RESEARCH ON THE QUAIL EGGS ALBUMEN CONTENT IN SOME HEAVY METALS

Directory of Open Access Journals (Sweden)

I. VIZITIU

2015-12-01

Full Text Available Out of a sample batch of 20 Japanese quails, Pharaoh race, with an age of 100 days and weighing 245 g, approximately 200 eggs were collected at the peak phase of the laying period. The eggs were measured, weighed and broken, separating the albumen from the other components. The data obtained served to calculate the physical and morphological indices. Primary chemical composition, caloricity, heavy metals content were first determined, the following data being obtained: quail eggs albumen has an average weight of 7.1025±0.061g, an average volume of 7.158±0.09cm3, an average density of 1.0168±0.0139 g/cm3 and an index (of freshness of 0.0797±0.0015. The albumen contains: 86.76% water, 13.24% dry matter, 0.835% mineral matter, 11.37% protein, 1.03% non-nitrogenous extractive substances and a caloricity of 289.498 kJ for 100 g product. The average content of heavy metals in albumen was: 1.33*10-3 ppm, for cadmium; 8.83*10-2 ppm, for zinc; 1.005 ppm, for cooper and 0.0 ppm, respectively, for lead.

Effect of increasing total solids contents on anaerobic digestion of food waste under mesophilic conditions: performance and microbial characteristics analysis.

Directory of Open Access Journals (Sweden)

Jing Yi

Full Text Available The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies.

Effect of Increasing Total Solids Contents on Anaerobic Digestion of Food Waste under Mesophilic Conditions: Performance and Microbial Characteristics Analysis

Science.gov (United States)

Jin, Jingwei; Dai, Xiaohu

2014-01-01

The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies. PMID:25051352

Effect of increasing total solids contents on anaerobic digestion of food waste under mesophilic conditions: performance and microbial characteristics analysis.

Science.gov (United States)

Yi, Jing; Dong, Bin; Jin, Jingwei; Dai, Xiaohu

2014-01-01

The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste with different total solids contents from 5% to 20% were compared and the microbial communities in reactors were investigated using 454 pyrosequencing technology. Three stable anaerobic digestion processes were achieved for food waste biodegradation and methane generation. Better performances mainly including volatile solids reduction and methane yield were obtained in the reactors with higher total solids content. Pyrosequencing results revealed significant shifts in bacterial community with increasing total solids contents. The proportion of phylum Chloroflexi decreased obviously with increasing total solids contents while other functional bacteria showed increasing trend. Methanosarcina absolutely dominated in archaeal communities in three reactors and the relative abundance of this group showed increasing trend with increasing total solids contents. These results revealed the effects of the total solids content on the performance parameters and the behavior of the microbial communities involved in the anaerobic digestion of food waste from wet to dry technologies.

Optimization of heavy metals total emission, case study: Bor (Serbia)

Science.gov (United States)

Ilić, Ivana; Bogdanović, Dejan; Živković, Dragana; Milošević, Novica; Todorović, Boban

2011-07-01

The town of Bor (Serbia) is one of the most polluted towns in southeastern Europe. The copper smelter which is situated in the centre of the town is the main pollutant, mostly because of its old technology, which leads to environmental pollution caused by higher concentrations of SO 2 and PM 10. These facts show that the word is about a very polluted region in Europe which, apart from harming human health in the region itself, poses a particular danger for wider area of southeastern Europe. Optimization of heavy metal's total emission was undertaken because years of long contamination of the soil with heavy metals of anthropogenic origin created a danger that those heavy metals may enter the food chains of animals and people, which can lead to disastrous consequences. This work represents the usage of Geographic Information System (GIS) for establishing a multifactor assessment model to quantitatively divide polluted zones and for selecting control sites in a linear programming model, combined with PROMETHEE/GAIA method, Screen View modeling system, and linear programming model. The results show that emissions at some control sites need to be cut for about 40%. In order to control the background of heavy metal pollution in Bor, the ecological environment must be improved.

PIGMENT CONTENT OF Chlorella vulgaris BEIJ. UNDER INFLUENCE OF THE SODIUM SELENITE AND METALS IONS

Directory of Open Access Journals (Sweden)

O. I.

2016-02-01

Full Text Available The aim of the research was to determine the conditions obtaining in the aquaculture of Chlorella vulgaris Beij. algosubstantion enriched with selenium and bioactive metals. For this purpose, the content of seaweed pigments studied by the action of sodium selenite in a concentration based on Se4+: 0.5, 5.0, 10.0 and 20.0 mg / dm3 for 1, 3 and 7 days and while exposed 10.0 mg Se4 +/dm3 and Zn2+, Mn2 +, Co2 +, Cu2 +, Fe3 + in concentrations of 5.0 mg/dm 3, 0.25, 0.002, 0.008 and 0.05 mg/dm3, respectively, within 7 days of culturing. The content of pigments was determined spectrophotometrically, the cellular walls were given off in the percoll gradient and investigated microscopically. The pigments content in Ch. vulgaris increase by 1,5–2,5 times in comparison with control sample under the influence of 10 mg Se(IV/dm3 with and without metal ions. In the same condition a ratio of chlorophylls a/b increased, that accompanied by the formation in cells of the second cell wall as the sign of successful adaptation process in the Chlorella cells under the influence of these factors. Thus, the cultivation of chlorella, enriched with selenium and bioactive metals, is possible within 7 days under the influence of 10 mg Se (IV/dm3 and mentioned concentration of these metal ions.

Content and distribution of trace metals in pristine permafrost environments of Northeastern Siberia, Russia

Science.gov (United States)

Antcibor, I.; Eschenbach, A.; Kutzbach, L.; Bolshiyanov, D.; Pfeiffer, E.-M.

2012-04-01

Arctic regions are one of the most sensitive areas with respect to climatic changes and human impacts. Research is required to discover how the function of permafrost soils as a buffering system for metal pollutants could change in response to the predicted changes. The goal of this work is to determine the background levels of trace metals in the pristine arctic ecosystems of the Lena River Delta in Northeastern Siberia and to evaluate the possible effect of human impacts on this arctic region. The Lena River Delta represents areas with different dominating geomorphologic processes that can generally be divided between accumulation and erosion sites. Frequent changes of the river water level create different periods of sedimentation and result in the formation of stratified soils and sediment layers which are dominated either by mineral substrates with allochthonous organic matter or pure autochthonous peat. The deposited sediments that have formed the delta islands are mostly composed of sand fractions; therefore the buffering effects of clay materials can be neglected. Samoylov Island is representative of the south-central and eastern modern delta surfaces of the Lena River Delta and is selected as a pilot study site. We determined total element contents of Fe, Mn, Zn, Cd, Ni, Cu, As, Pb, Co and Hg in soil horizons from different polygonal elevated rims, polygonal depressed centers and the middle floodplain. High gravimetric concentrations (related to dry mass of soil material) of Mn and Fe are found within all soil profiles and vary from 0.14 to 1.39 g kg-1 and from 10.7 to 41.2 g kg-1, respectively. While the trace element concentrations do not exceed typical crustal abundances, the maximum values of most of the metals are observed within the soil profile situated at the middle floodplain. This finding suggests that apart from the parent material the second potential source of trace metals is due to allochthonous substance input during annual flooding of the

Species variation of Aegilops genus and heavy metal content in plant habitat soil at southern Adriatic localities

Directory of Open Access Journals (Sweden)

Dimitrijević Miodrag

2014-01-01

Full Text Available The Aegilops genus is a wild relative to the bread wheat, having chromosomes homologous to wheat chromosomes. That genus could be the source of many usefull abiotic stress tolerance genes. Facing a global climate changes, as well as, environmental erosion, it is important to create a desirable genetic variability that could correspond to environmental challenges. Heavy metals in soil could cause soil pollution, could lead to different phenotypic changes in plants, and could enter food chain. Assessment of Aegilops sp. population variation, as well as, heavy metal content in their habitat was the main goal in this research. Aegilops population composition was examined and samples were taken from 55 localities of South Adriatic coastal and littoral areas. Topsoil samples from all the localities were taken and heavy metal content, namely Cr, Pb, Zn, Ni, Cd and Cu, was analyzed,. Manganese content was measured, as well. Value of pH was established.

Ecological risk assessment of a coastal zone in Southern Vietnam: Spatial distribution and content of heavy metals in water and surface sediments of the Thi Vai Estuary and Can Gio Mangrove Forest.

Science.gov (United States)

Costa-Böddeker, Sandra; Hoelzmann, Philipp; Thuyên, Lê Xuân; Huy, Hoang Duc; Nguyen, Hoang Anh; Richter, Otto; Schwalb, Antje

2017-01-30

Enrichment of heavy metals was assessed in the Thi Vai Estuary and in the Can Gio Mangrove Forest (SE, Vietnam). Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn contents in water and in sediments were measured. Total organic carbon, nitrogen, phosphorus and C/N ratios were determined. Cu and Cr values were higher than threshold effect level of toxicity, while Ni exceeded probable effect level, indicating the risk of probable toxicity effects. Enrichment factors (EF), contamination factor (CF) and Geo-accumulation index (I-geo) were determined. CF reveals moderate to considerable pollution with Cr and Ni. EF suggests anthropogenic sources of Cr, Cu and Ni. I-geo indicates low contamination with Co, Cu and Zn and moderate contamination with Cr and Ni. Overall metal contents were lower than expected for this highly industrialized region, probably due to dilution, suggesting that erosion rates and hydrodynamics may also play a role in metal contents distribution. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of antibacterial and anthelmintic activities with total phenolic contents of Piper betel leaves

Directory of Open Access Journals (Sweden)

Kazi Akter

2014-09-01

Full Text Available Objective: The study was conducted to investigate the antibacterial and anthelmintic activities and to determine total phenolic contents of methanolic extract of Piper betel leaves. Materials and Methods: The extract was subjected to assay for antibacterial activity using both gram positive and gram negative bacterial strains through disc diffusion method; anthelmintic activity with the determination of paralysis and death time using earthworm (Pheritima posthuma at five different concentrations and the determination of total phenolic contents using the Folin-ciocalteau method. Results: The extract showed significant (p

Optimization of supercritical carbon dioxide extraction of Piper Betel Linn leaves oil and total phenolic content

Science.gov (United States)

Aziz, A. H. A.; Yunus, M. A. C.; Arsad, N. H.; Lee, N. Y.; Idham, Z.; Razak, A. Q. A.

2016-11-01

Supercritical Carbon Dioxide (SC-CO2) Extraction was applied to extract piper betel linn leaves. The piper betel leaves oil was used antioxidant, anti-diabetic, anticancer and antistroke. The aim of this study was to optimize the conditions of pressure, temperature and flowrate for oil yield and total phenolic content. The operational conditions of SC-CO2 studied were pressure (10, 20, 30 MPa), temperature (40, 60, 80 °C) and flowrate carbon dioxide (4, 6, 8 mL/min). The constant parameters were average particle size and extraction regime, 355pm and 3.5 hours respectively. First order polynomial expression was used to express the extracted oil while second order polynomial expression was used to express the total phenolic content and the both results were satisfactory. The best conditions to maximize the total extraction oil yields and total phenolic content were 30 MPa, 80 °C and 4.42 mL/min leading to 7.32% of oil and 29.72 MPa, 67.53 °C and 7.98 mL/min leading to 845.085 mg GAE/g sample. In terms of optimum condition with high extraction yield and high total phenolic content in the extracts, the best operating conditions were 30 MPa, 78 °C and 8 mL/min with 7.05% yield and 791.709 mg gallic acid equivalent (GAE)/g sample. The most dominant condition for extraction of oil yield and phenolic content were pressure and CO2 flowrate. The results show a good fit to the proposed model and the optimal conditions obtained were within the experimental range with the value of R2 was 96.13% for percentage yield and 98.52% for total phenolic content.

AKTIVITAS ANTIOKSIDAN DAN KADAR FENOLIK TOTAL DARI GANGGANG MERAH (Gracilaria verrucosa L. [Antioxidant Activity and Total Phenolic Content of Red Sea Weed (Gracilaria verrucosa L.

Directory of Open Access Journals (Sweden)

Lydia Ninan Lestario*

2008-12-01

Full Text Available The aims of this study were to compare the antioxidant activity and the total phenolic content of red sea weed (Gracilaria verrucosa L. from extract of methanol, ethanol, acetone, chloroform and hexane; and the correlation between total phenolic content and the antioxidant activity of each extract; then to determine the chlorophyll a, chlorophyll b, and carotene content of each extract and their correlation with the free radical scavenging activity as well. The antioxidant activity were measured by free radical scavenging method with DPPH and by reducing power method with K4Fe(CN6 as standard, whereas the total phenolic content was measured by Folin Ciocalteu method with gallic acid as standard. Chlorophyll a, chlorophyll b, and carotene were determined by spectrophotometric method based on Lambert-Beer law. The data of antioxidant activity and total phenolic content were statistically analyzed by Randomized Completely Block Design (RCBD with five kinds of solvents as treatments and five replications. Honestly Significant Difference Test (HSDT was used to compare the difference of treatments; whereas the chlorophyll a, chlorophyll b, and carotene content were not statistically analyzed since they were only supplement data. The results showed that the highest of the antioxidant activity by free radical scavenging method was found in acetone extract : 43.43% (BHT: 84.15%; whereas by reducing power method was found in chloroform extract : 0.1756 meq K4Fe(CN6/g extract (BHT : 6.1767 meq K4Fe(CN6/g extract; and the highest of the total phenolic content was also found in acetone extract : 45.29 mg /g extract. There were close correlation between phenolic content and antioxidant activity both by free radical scavenging method and by reducing power method with r (coefficient correlation respectivelly 0.89 and 0.91.Chlorophyll a and carotene had also close correlation with the free radical scaveging activity, but not for chlorophyll b.

Evaluation of heavy metal content in irradiated sludge, chicken manure and fertilized soil in Indonesia

International Nuclear Information System (INIS)

Hilmy, N.; Suwirma, S.; Surtipanti, S.; Harsojo

1997-01-01

The contents of heavy metals, Hg, Cd, Cr, Cu, Ni, Pb, Zn and Co, were determined in two irradiated sludges, chicken manure and fertilized soil. Sludge I was collected from a treatment plant in Jakarta city, Sludge II from a sludge reservoir in a Jakarta suburb, chicken manure was obtained from a farm south of Jakarta, and the soil had been treated with phosphate fertilizer since 1967. The sludges and chicken manure were collected during the rainy and dry seasons, and the heavy-metal contents were determined by atomic-absorption spectrometry and neutron-activation analysis. The results obtained are compared with data from Canada, and are discussed in terms of permissible limits in the environment. (author)

CAMEX-4 DC-8 NEVZOROV TOTAL CONDENSED WATER CONTENT SENSOR V1

Data.gov (United States)

National Aeronautics and Space Administration — The Nevzorov probe is an instrument that measures the total water content of the sample of air which passes through it. It flew on the NASA DC-8 during the CAMEX-4...

[Heavy metals and hydrocarbons content in soils of settlements of the Yamal-Nenets autonomous region].

Science.gov (United States)

Alekseev, I I; Abakumov, E V; Shamilishvili, G A; Lodygin, E D

In August 2015 there were executed investigations on the study of the soils diversity of the Yamal-Nenets Autonomous Okrug. One of the directions of this work got be the study of urban soils of settlements of the Yamal-Nenents Autonomous Okrug. The sectors for the observation were settlement of Harsaim, village Aksarka, city of Salekhard, settlement Harp and city of Labytnangi. About 20 soil samples were collected during the field work. Samples were collected from a depth of 0-5 cm and 5-20 cm. Heavy metals (HM) were detected with the use of X-ray fluorescent analyzer “Spectroscan-MAX”. The HM content values were compared with the corresponding Approxible Permissible Concentrations and Maximum Allowable Concentrations (MAC) adopted in Russia. Hydrocarbons content was determined by gravimetric method. Values of the hydrocarbons content in studied soils were compared with the existing regulations of the Russian Federation. The levels of soil contamination by hydrocarbons were determined. The study of soil samples from different settlements allowed to reveal characteristic features of soil contamination of separate settlements by HM and hydrocarbons and to compare them against each other. The vast majority of samples are characterized by arsenic exceedance of MAC, which should indicate to a high regional background of this element. For a more adequate assessment of the Zc meaning as the value of the total pollution index of soils there were used not only arithmetical average values of the coefficients of the chemical composition concentration (Kc), but also their average geometric values. According to levels of total soil contamination most of soil samples are characterized as non-hazardous (Zc<16). Calculation of soil pollution index showed that the most of soil samples have values less than 1. It characterizes soils as unpolluted. Statistical processing of obtained data in the media of the analytical software interface STATISTICA 10 showed a statistically

Flow analysis of metals in a municipal solid waste management system

International Nuclear Information System (INIS)

Jung, C.H.; Matsuto, T.; Tanaka, N.

2006-01-01

This study aimed to identify the metal flow in a municipal solid waste (MSW) management system. Outputs of a resource recovery facility, refuse derived fuel (RDF) production facility, carbonization facility, plastics liquefaction facility, composting facility, and bio-gasification facility were analyzed for metal content and leaching concentration. In terms of metal content, bulky and incombustible waste had the highest values. Char from a carbonization facility, which treats household waste, had a higher metal content than MSW incinerator bottom ash. A leaching test revealed that Cd and Pb in char and Pb in RDF production residue exceeded the Japanese regulatory criteria for landfilling, so special attention should be paid to final disposal of these substances. By multiplying metal content and the generation rate of outputs, the metal content of input waste to each facility was estimated. For most metals except Cr, the total contribution ratio of paper/textile/plastics, bulky waste, and incombustible waste was over 80%. Approximately 30% of Cr originated from plastic packaging. Finally, several MSW management scenarios showed that most metals are transferred to landfills and the leaching potential of metals to the environment is quite small

Total body and regional bone mineral content in hemodialysis patients

International Nuclear Information System (INIS)

Hagiwara, Satoshi; Aratani, Hideyui; Miki, Takami; Nishizawa, Yoshiki; Okamura, Terue; Koizumi, Yoshiko; Ochi, Hironobu; Morii, Hirotoshi

1994-01-01

Bone mineral content (BMC) in the total body and lumbar spine was evaluated in 126 hemodialysis patients (60 males, 66 females) by dual photon absorptiometry with the Norland DBD 2600. Measurements of: 1) total body BMC divided by lean body mass (BMC TB /LBM), 2) bone mineral density (BMD) of total body, 3) BMD of four regional sections (head, trunk, pelvis, and legs), and 4) BMD of lumbar spine, generally showed a significant decrease in the hemodialysis patients compared to the reference population. However, arm BMD did not show a significant difference between patients and control populations. The z-score of BMC TB /LBM declined significantly throughout the duration of hemodialysis, although that of the lumbar spine BMD did not. It should be noted that the degree of decrease in BMC was more prominent in the total body measurement than in the lumbar spine measurement. There was preferential osteopenia of the total body in the hemodialysis patients. Although the lumbar spine BMD showed a lower value than the control population, the lumbar spine is not the recommended region to monitor the BMD change in hemodialysis patients. (author)

Variations in atmospheric PM trace metal content in Spanish towns: Illustrating the chemical complexity of the inorganic urban aerosol cocktail

Science.gov (United States)

Moreno, Teresa; Querol, Xavier; Alastuey, Andrés; Viana, Mar; Salvador, Pedro; Sánchez de la Campa, Ana; Artiñano, Begoña; de la Rosa, Jesús; Gibbons, Wes

The majority of the Spanish urban population breathe air containing inhalable ambient airborne particles at average concentrations of 30-46 μg m -3 (PM 10) and 20-30 μg m -3 (PM 2.5). Even though the average weight of inhaled urban aerosol is commonly similar, however, there can be large chemical differences between the ambient dusts from different towns, including the more bioreactive elements such as some metals. In this context, we compare the source-apportioned trace metal content of airborne PM 10 and PM 2.5 collected daily over a 1-year period from six population centres in Spain: Barcelona, Alcobendas, Llodio, Huelva, Tarragona and Las Palmas de Gran Canaria. Total average trace metal (ΣTM) PM 10 and PM 2.5 contents vary by up to a factor of around 3, reaching a maximum of ΣTM 10 811 ng m -3 and ΣTM 2.5 503 ng m -3 at Llodio, an industrial but humid site with the lowest PM 10 mass levels but high contamination by Zn, Pb, Mn, Sn, Ni and Cr. In contrast, pollution at Huelva, although another industrially influenced site, instead emphasises Cu and As, whereas Barcelona, where traffic emissions and resuspension contribute to some of the highest average PM 10 levels in Spain, has unusually raised levels of Ti, V and Ba. Such variations in both daily and annual average PM bulk chemistry, particularly in potentially toxic trace metals concentrated in the finer aerosols (such as Cd, As, Pb, Hg and Ni), predict that PM health effects on resident populations from different towns are unlikely to be the same.

Solid fat content as a substitute for total polar compound analysis in edible oils

Science.gov (United States)

The solid fat contents (SFC) of heated edible oil samples were measured and found to correlate positively with total polar compounds (TPC) and inversely with triglyceride concentration. Traditional methods for determination of total polar compounds require a laboratory setting and are time intensiv...

Unusual presentation of failed metal-on-metal total hip arthroplasty with features of neoplastic process

Directory of Open Access Journals (Sweden)

Robert P. Runner, MD

2017-06-01

Full Text Available Metal-on-metal (MoM total hip arthroplasty (THA is associated with increased incidence of failure from metallosis, adverse tissue reactions, and the formation of pseudotumors. This case highlights a 53-year-old female with an enlarging painful thigh mass 12 years status post MoM THA. Radiographs and advanced imaging revealed an atypical mass with cortical bone destruction and spiculation, concerning for periprosthetic malignancy. Open frozen section biopsy was performed before undergoing revision THA in a single episode of care. This case illustrates that massive pseudotumors can be locally aggressive causing significant femoral bone destruction and may mimic malignancy. It is important that orthopaedic surgeons, radiologists and pathologists understand the relative infrequency of periprosthetic malignancy in MoM THA to mitigate patient concerns, misdiagnosis, and allow for an evidence based discussion when treating massive pseudotumors.

Procyanidin content of grape seed and pomace, and total anthocyanin content of grape pomace as affected by extrusion processing.

Science.gov (United States)

Khanal, R C; Howard, L R; Prior, R L

2009-08-01

Grape juice processing by-products, grape seed and pomace are a rich source of procyanidins, compounds that may afford protection against chronic disease. This study was undertaken to identify optimal extrusion conditions to enhance the contents of monomers and dimers at the expense of large molecular weight procyanidin oligomers and polymers in grape seed and pomace. Extrusion variables, temperature (160, 170, and 180 degrees C in grape seed, and 160, 170, 180, and 190 degrees C in pomace) and screw speed (100, 150, and 200 rpm in both) were tested using mixtures of grape seed as well as pomace with decorticated white sorghum flour at a ratio of 30 : 70 and moisture content of 45%. Samples of grape seed and pomace were analyzed for procyanidin composition before and after extrusion, and total anthocyanins were determined in pomace. Additionally, chromatograms from diol and normal phase high-performance liquid chromatography were compared for the separation of procyanidins. Extrusion of both grape by-products increased the biologically important monomer and dimers considerably across all temperature and screw speeds. Highest monomer content resulted when extruded at a temperature of 170 degrees C and screw speed of 200 rpm, which were 120% and 80% higher than the unextruded grape seed and pomace, respectively. Increases in monomer and dimer contents were apparently the result of reduced polymer contents, which declined by 27% to 54%, or enhanced extraction facilitated by disruption of the food matrix during extrusion. Extrusion processing reduced total anthocyanins in pomace by 18% to 53%. Extrusion processing can be used to increase procyanidin monomer and dimer contents in grape seed and pomace. Procyanidins in grape by-products have many health benefits, but most are present as large molecular weight compounds, which are poorly absorbed. Extrusion processing appears to be a promising technology to increase levels of the bioactive low molecular weight

Using total suspended solids (TSS) and turbidity as proxies for evaluation of metal transport in river water

International Nuclear Information System (INIS)

Nasrabadi, T.; Ruegner, H.; Sirdari, Z.Z.; Schwientek, M.; Grathwohl, P.

2016-01-01

The present study was carried out in Haraz basin (Iran) that is located in south of the Caspian Sea. The goal of this study was to establish correlations amongst total suspended solids concentration (TSS) and turbidity with total pollutant concentrations to evaluate the dissolved and particle-bound concentrations of major toxic metals. It also aimed to validate TSS and/or turbidity measurements as proxies to monitor pollutant fluxes. Eight metals, namely nickel, lead, cadmium, copper, zinc, cobalt, arsenic and strontium were analyzed for dissolved and total concentrations in water at ten locations within the catchment. TSS and turbidity were also measured. Sampling campaigns were designed to cover both the rainy (December) and the dry (May) season within the basin. The robust relationship between TSS (202–1212 mg/l) and turbidity (63–501 NTUs) in both seasons warranted their interchangeable potential as proxies within the observed ranges. Total element concentrations were plotted in separate attempts versus TSS and turbidity for all locations and both events. Very good linear correlations were attained where the slopes represent the metals concentration on suspended solids and the intercept the dissolved concentration in water. The results achieved by these linear regressions were in very good agreement with independently measured values for dissolved concentration and concentrations on river bed sediments taken at the same locations. This demonstrates that turbidity and/or TSS measurements may be used for monitoring of metal loads if once calibrated against total concentration of metals. The results also revealed that in the lower Haraz catchment metal concentrations on suspended and river bed sediment were homogeneously distributed along the investigated river stretch. This is assumed to be due to intensive gravel and sand mining activities in the upper and middle part of the catchment. - Highlights: • Turbidity is evaluated as a feasible proxy to predict

Contents of heavy metals in urban parks and university campuses

Science.gov (United States)

Zhang, Yong; Chen, Qian

2018-01-01

Because the city park has become an important place for people's daily leisure, and the university campus is one of the most densely populated areas of the city, their environmental pollution is critical for the health and safety of the residents. In this paper, two kinds of evaluation methods were used to evaluate the content of Cu, Zn, As and Pb in soils of city parks and university campus in Xiangtan. The results showed that only Juhuatang Park was a non-polluted area, and the other 7 sampling sites were lightly polluted; Analysis shows the heavy metal contents of soil in city parks are closely related to vehicle emissions, agriculture and irrigation, combustion of household waste, living area and commercial shops, the use of fossil fuels, industrial waste gas and waste residue and other human activities.

Evaluation of antibacterial and anthelmintic activities with total phenolic contents of Piper betel leaves

Science.gov (United States)

Akter, Kazi Nahid; Karmakar, Palash; Das, Abhijit; Anonna, Shamima Nasrin; Shoma, Sharmin Akter; Sattar, Mohammad Mafruhi

2014-01-01

Objective: The study was conducted to investigate the antibacterial and anthelmintic activities and to determine total phenolic contents of methanolic extract of Piper betel leaves. Materials and Methods: The extract was subjected to assay for antibacterial activity using both gram positive and gram negative bacterial strains through disc diffusion method; anthelmintic activity with the determination of paralysis and death time using earthworm (Pheritima posthuma) at five different concentrations and the determination of total phenolic contents using the Folin-ciocalteau method. Results: The extract showed significant (pbetel leaves extract, therefore it may be processed for further drug research. PMID:25386394

The Total Electron Content From InSAR and GNSS: A Midlatitude Study

DEFF Research Database (Denmark)

Musico, Elvira; Cesaroni, Claudio; Spogli, Luca

2018-01-01

The total electron content (TEC) measured from the interferometric synthetic aperture radar (InSAR) and froma dense network of global navigation satellite system (GNSS) receivers are used to assess the capability of InSAR to retrieve ionospheric information, when the tropospheric contribution...

Potentially toxic metals in ombrotrophic peat along a 400 km English-Scottish transect

Energy Technology Data Exchange (ETDEWEB)

Smith, E.J. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Hughes, S. [Centre for Ecology and Hydrology (Bangor), Deiniol Road, Bangor, Gwynedd LL57 2UP (United Kingdom); Lawlor, A.J. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Lofts, S. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Simon, B.M. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Stevens, P.A. [Centre for Ecology and Hydrology (Bangor), Deiniol Road, Bangor, Gwynedd LL57 2UP (United Kingdom); Stidson, R.T. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Tipping, E. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom)]. E-mail: et@ceh.ac.uk; Vincent, C.D. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom)

2005-07-15

Four samples of ombrotrophic peat were collected from each of 10 upland locations in a transect from the southern Pennines to the Highland Boundary Fault, a total distance of ca. 400 km. Bulk compositions and other properties were determined. Total contents of Al and heavy metals (Ni, Cu, Zn, Cd, Pb) were determined following digestion with hydrofluoric acid, and concentrations of metals extractable with dilute nitric acid were also measured. Supernatants obtained from aqueous extractions of the peat samples were analysed for pH, major cations and anions, dissolved organic carbon and dissolved metals, and concentrations of free metal ions (Al{sup 3+}, Ni{sup 2+}, etc.) were estimated by applying a chemical speciation model. Both total and HNO{sub 3}-extractable metal concentrations varied along the transect, the highest values being found at locations close to industrial and former mining areas. The HNO{sub 3}-extractable soil metal contents of Ni, Cu and Cd were appreciably lower than lowest-observed-effect-concentrations (LOEC) for toxicity towards microorganisms in acid, organic rich soils. However, the contents of Zn at two locations, and of Pb at five locations exceeded LOECs, suggesting that they may be exerting toxic effects in the peats. Soil solution concentrations of free heavy metal ions (Cu{sup 2+}, Zn{sup 2+}, Cd{sup 2+}, Pb{sup 2+}) were substantially lower than LOECs for toxicity towards vascular plants, whereas concentrations of Al{sup 3+} were near to toxic levels at two locations. - P eat metal contents depend upon proximity to industrial and mining areas; the metals may be exerting toxic effects in some places.

Relationship between metal speciation in soil solution and metal adsorption at the root surface of ryegrass.

Science.gov (United States)

Kalis, Erwin J J; Temminghoff, Erwin J M; Town, Raewyn M; Unsworth, Emily R; van Riemsdijk, Willem H

2008-01-01

The total metal content of the soil or total metal concentration in the soil solution is not always a good indicator for metal availability to plants. Therefore, several speciation techniques have been developed that measure a defined fraction of the total metal concentration in the soil solution. In this study the Donnan Membrane Technique (DMT) was used to measure free metal ion concentrations in CaCl(2) extractions (to mimic the soil solution, and to work under standardized conditions) of 10 different soils, whereas diffusive gradients in thin-films (DGT) and scanning chronopotentiometry (SCP) were used to measure the sum of free and labile metal concentrations in the CaCl(2) extracts. The DGT device was also exposed directly to the (wetted) soil (soil-DGT). The metal concentrations measured with the speciation techniques are related to the metal adsorption at the root surface of ryegrass (Lolium perenne L.), to be able to subsequently predict metal uptake. In most cases the metal adsorption related pH-dependently to the metal concentrations measured by DMT, SCP, and DGT in the CaCl(2) extract. However, the relationship between metal adsorption at the root surface and the metal concentrations measured by the soil-DGT was not-or only slightly-pH dependent. The correlations between metal adsorption at the root surface and metal speciation detected by different speciation techniques allow discussion about rate limiting steps in biouptake and the contribution of metal complexes to metal bioavailability.

Trabecular metal acetabular components in primary total hip arthroplasty

DEFF Research Database (Denmark)

Laaksonen, Inari; Lorimer, Michelle; Gromov, Kirill

2018-01-01

Background and purpose - Trabecular metal (TM) cups have demonstrated favorable results in acetabular revision and their use in primary total hip arthroplasty (THA) is increasing. Some evidence show that TM cups might decrease periprosthetic infection (PPI) incidence. We compared the survivorship...... of TM cups with that of other uncemented cups in primary THA, and evaluated whether the use of TM cups is associated with a lower risk of PPI. Patients and methods - 10,113 primary THAs with TM cup and 85,596 THAs with other uncemented cups from 2 high-quality national arthroplasty registries were...

Comparative Analysis of Total Phenolic Content in Sea Buckthorn Wine and Other Selected Fruit Wines

OpenAIRE

Bharti Negi; Gargi Dey

2009-01-01

This is the first report from India on a beverage resulting from alcoholic fermentation of the juice of sea buckthorn (Hippophae rhamnoides L) using lab isolated yeast strain. The health promoting potential of the product was evaluated based on its total phenolic content. The most important finding was that under the present fermentation condition, the total phenolic content of the wine product was 689 mg GAE/L. Investigation of influence of bottle ageing on the sea buckthorn wine showed a sl...

Fruit quality, anthocyanin and total phenolic contents, and antioxidant activities of 45 blueberry cultivars grown in Suwon, Korea

OpenAIRE

Kim, Jin Gook; Kim, Hong Lim; Kim, Su Jin; Park, Kyo-Sun

2013-01-01

Blueberry fruits from 45 commercial cultivars (39 northern highbush and 6 half highbush blueberry) grown in Suwon, Korea were analyzed for fruit size, soluble solids content, titratable acidity, total anthocyanin content, total phenolic content, and antioxidant activity. Fruit characteristics varied widely among the 45 blueberry cultivars. Fruit weight ranged from 0.9 to 3.6 g, soluble solids content from 8.3 to 14.3 °Brix, and titratable acidity from 0.8% to 3.6%. Antioxidant activity ranged...

NUTRITIONAL VALUE AND HEAVY METALS CONTENTS OF THE DRIED SEA CUCUMBER Stichopus vastus FROM SALEMO ISLAND, INDONESIA

Directory of Open Access Journals (Sweden)

Abdullah Rasyid

2018-01-01

Full Text Available The dried sea cucumber Stichopus vastus is one of the commercially species harvested in Indonesian waters. This study aims to highlight the nutritional value and heavy metals content of dried sea cucumber S. vastus. Proximate (moisture, ash, protein, fat and carbohydrate, mineral (sodium, calcium, potassium and iron and heavy metal (mercury, cadmium, arsenic and lead were determined by standard method of AOAC, while phosphorous was determined by spectrophotometric method. Chondroitin sulphate was determined by UPLC method, glucosamine sulphate and vitamin (A, B1, B2 and E by HPLC method. Results show that protein was the major component in proximate analysis of dried sea cucumber S. vastus in the present study. The protein content was 38.70%. Moisture, ash, fat and carbohydrate content were 19.46%, 34.04%, 0.38% and 7.42% respectively. All vitamins and heavy metals examined in this study were not detected. The sodium content was 8054.36 mg/100 g higher than other minerals. Calcium, potassium, phosphorus and iron content were 2449.9 mg/100 g, 159.77 mg/100 g, 5085.2 mg/100 g and 520.8 mg/100 g respectively. Glucosamine sulphate content was found to be 2.429 g/100 g, whereas chondroitin sulphate was found to be 1.115 g/100 g. It can therefore, be concluded that the dried sea cucumber S. vastus from Salemo Island is safe for human consumption and hence can be used as a source of food supplement in the future. Keywords: food supplement, Salemo island, Stichopus vastus

Heavy metals and metalloids in egg contents and eggshells of passerine birds from Arizona

Science.gov (United States)

Mora, Miguel A.

2003-01-01

Concentrations of inorganic elements were determined in eggs of passerine birds including the endangered southwestern willow flycatcher (Empidonax traillii extimus) from four regions in Arizona. The main aim of the study was to determine the distribution of metals in egg contents and eggshells, with emphasis on the deposition of Sr in eggshells. Seventy eggs of 11 passerine species were collected at four nesting locations during 2000. Aluminum, Ba, Cr, Cu, Mn, Se, Sr, and Zn, were detected primarily in egg contents of all bird species. Arsenic, Ni, Pb, and V were detected primarily in eggshells. A proportion of most inorganic elements accumulated in the eggshell. Concentrations of Ba, Cu, Mn, Se, Sr, and Zn in egg contents and As, Ba, Cu, and V in eggshells of yellow-breasted chats (Icteria virens) were similar among locations. However, concentrations of Mn, Ni, Sr, and Zn in eggshells were significant different among locations. Except for Cu, Mn, Se, and Zn, concentrations of inorganic elements were 2–35 times greater in eggshells than in eggs. Most concentrations of metals and metalloids in eggs and eggshells of all the bird species were below levels known to affect reproduction or that have other deleterious effects. However, I found somewhat elevated concentrations of Sr in eggshells (highest mean=1505 μg/g dw, n=3) of yellow-breasted chats and willow flycatchers, and in egg contents of yellow warblers (Dendroica petechia) and song sparrows (Melospiza melodia). Whether current observed concentrations of Sr in eggshells are affecting nesting birds in Arizona remains to be determined. Strontium and other metals could be associated with lower hatching success in some areas. This study shows that a proportion of many inorganic elements accumulates in the eggshell and that the potential effects on the proper structure and functioning of the eggshell should not be ignored.

Trace metal depositional patterns from an open pit mining activity as revealed by archived avian gizzard contents

Energy Technology Data Exchange (ETDEWEB)

Bendell, L.I., E-mail: bendell@sfu.ca

2011-02-15

Archived samples of blue grouse (Dendragapus obscurus) gizzard contents, inclusive of grit, collected yearly between 1959 and 1970 were analyzed for cadmium, lead, zinc, and copper content. Approximately halfway through the 12-year sampling period, an open-pit copper mine began activities, then ceased operations 2 years later. Thus the archived samples provided a unique opportunity to determine if avian gizzard contents, inclusive of grit, could reveal patterns in the anthropogenic deposition of trace metals associated with mining activities. Gizzard concentrations of cadmium and copper strongly coincided with the onset of opening and the closing of the pit mining activity. Gizzard zinc and lead demonstrated significant among year variation; however, maximum concentrations did not correlate to mining activity. The archived gizzard contents did provide a useful tool for documenting trends in metal depositional patterns related to an anthropogenic activity. Further, blue grouse ingesting grit particles during the time of active mining activity would have been exposed to toxicologically significant levels of cadmium. Gizzard lead concentrations were also of toxicological significance but not related to mining activity. This type of 'pulse' toxic metal exposure as a consequence of open-pit mining activity would not necessarily have been revealed through a 'snap-shot' of soil, plant or avian tissue trace metal analysis post-mining activity. - Research Highlights: {yields} Archived gizzard samples reveals mining history. {yields} Grit ingestion exposes grouse to cadmium and lead. {yields} Grit selection includes particles enriched in cadmium. {yields} Cadmium enriched particles are of toxicological significance.

The Investigation of Heavy Metal Content (Cu, Cd, Pb in Sapu-Sapu Fish (Hypostomus plecostomus in Bengawan Solo River

Directory of Open Access Journals (Sweden)

Ristiyana Eko Setyarini

2016-12-01

Full Text Available A study had been carried out to investigate heavy metal (Cu, Cd, Pb content in sapu-sapu fish (hypostomus plecostomus in Bengawan Solo river. The type of this research was observational research, with sapu-sapu fish inhabit Bengawan Solo River as the population. The samples were taken with purposive random sampling. Nine sapu-sapu fishes taken from 3 places, i.e.: Nguter Sukoharjo area, Premulung river outlet and Anyar river, 3 fishes from each palce, and then take examined the content of heavy metal. The result of study showed that the average content of Cu: 0.027 mg/100gr, Cd: 0.005 mg/100gr and Pb: 0.042 mg/100gr. Hence, sapu-sapu fish in Be3ngawan Solo had been contaminated with heavy metal (Cu, Cd, and Pb and should not be consumed.

Complexities of the storm-time characteristics of ionospheric total electron content

International Nuclear Information System (INIS)

Kane, R.P.

1982-01-01

The complexities of the storm-time variations of the ionospheric total electron content are briefly reviewed. It is suggested that large variations from storm to storm may be due to irregular flows from the auroral region towards equator. A proper study of such flows needs an elaborate network of TEC measuring instruments. The need of planning and organizing such a network is emphasized

Competition effects in cation binding to humic acid: Conditional affinity spectra for fixed total metal concentration conditions

Science.gov (United States)

David, Calin; Mongin, Sandrine; Rey-Castro, Carlos; Galceran, Josep; Companys, Encarnació; Garcés, José Luis; Salvador, José; Puy, Jaume; Cecilia, Joan; Lodeiro, Pablo; Mas, Francesc

2010-09-01

Information on the Pb and Cd binding to a purified Aldrich humic acid (HA) is obtained from the influence of different fixed total metal concentrations on the acid-base titrations of this ligand. NICA (Non-Ideal Competitive Adsorption) isotherm has been used for a global quantitative description of the binding, which has then been interpreted by plotting the Conditional Affinity Spectra of the H + binding at fixed total metal concentrations (CAScTM). This new physicochemical tool, here introduced, allows the interpretation of binding results in terms of distributions of proton binding energies. A large increase in the acidity of the phenolic sites as the total metal concentration increases, especially in presence of Pb, is revealed from the shift of the CAScTM towards lower affinities. The variance of the CAScTM distribution, which can be used as a direct measure of the heterogeneity, also shows a significant dependence on the total metal concentration. A discussion of the factors that influence the heterogeneity of the HA under the conditions of each experiment is provided, so that the smoothed pattern exhibited by the titration curves can be justified.

Recycled scrap metal and soils/debris with low radioactive contents

International Nuclear Information System (INIS)

Carriker, A.W.

1996-01-01

Two types of large volume bulk shipments of materials with low radioactivity have characteristics that complicate compliance with normal transport regulations. Scrap metal for recycling sometimes contains radioactive material that was not known or identified by the shipper prior to it being offered for transport to a scrap recycle processor. If the radioactive material is not detected before the scrap is processed, radiological and economic problems may occur. If detected before processing, the scrap metal will often be returned to the shipper. Uranium mill-tailings and contaminated soils and debris have created potential public health problems that required the movement of large volumes of bulk material to isolated safe locations. Similarly, old radium processing sites have created contamination problems needing remediation. The US Department of Transportation has issued exemptions to shippers and carriers for returning rejected scrap metal to original shippers. Other exemptions simplify transport of mill-tailings and debris from sites being remediated. These exemptions provide relief from detailed radioassay of the radioactive content in each conveyance as well as relief from the normal requirements for packaging, shipping documents, marking, labelling, and placarding which would be required for some of the shipments if the exemptions were not issued. (Author)

Heavy metal movement in metal-contaminated soil profiles

Energy Technology Data Exchange (ETDEWEB)

Li, Zhenbin; Shuman, L.M. [Univ. of Georgia, Griffin, GA (United States)

1996-10-01

Heavy metal movement in soil profiles is a major environmental concern because even slow transport through the soil may eventually lead to deterioration of groundwater quality. In this study, three metal-contaminated soil (Fuquay, Dothan, and Clarendon) were selected from cropland were a high-metal flue dust had been applied annually for 6 years to raise soil pH, with application ending 4 years before sampling. One uncontaminated soil (Tifton) from the same physiographic area was also sampled as a control. Soil samples were collected in 15-cm increments from the surface to 105 cm in depth. Total contents of Zn, Cd, and Pb in the soils samples were determined. To better understand metal movement in relation to metal fractions in the soil profile, soil samples were also extracted sequentially for exchangeable (EXC), organic matter (OM), Mn oxide (MNO), amorphous Fe oxide (AFEO), crystalline Fe oxide (CFEO), and residual (RES) fractions. 35 refs., 6 figs., 2 tabs.

[Heavy metals contents and Hg adsorption characteristics of mosses in virgin forest of Gongga Mountain].

Science.gov (United States)

Liang, Peng; Yang, Yong-Kui; He, Lei; Wang, Ding-Yong

2008-06-01

Seven main moss species in the Hailuogou virgin forest of Gongga Mountain were sampled to determine their heavy metals (Hg, Cr, Cd, Ni, Pb, Cu, Mn, Zn and Fe) content, and two widely distributed species, Pleurozium schreberi (Brid.) Mitt. and Racomitrium laetum Besch., were selected to study their Hg adsorption characteristics. The results showed that the heavy metals contents in the mosses were lower than the background values in Europe and America, except that the Cd had a comparable value, which indicated that the atmosphere in study area was not polluted by heavy metals and good in quality. The Hg adsorption by P. schreberi and R. laetum was an initiative and rapid process, with the equilibrium reached in about two hours, and could be well fitted by Freundlich and Langmuir equations. Based on Langmuir equation, the maximum Hg adsorption capacities of P. schreberi and R. laetum were 15.24 and 8.19 mg x g(-1), respectively, suggesting that the two mosses had a good capacity of Hg adsorption, and could be used as the bio-monitors of atmospheric Hg pollution.

Heavy metals contamination of soils in response to wastewater irrigation in Rawalpindi region

International Nuclear Information System (INIS)

Mushtaq, N.; Khan, K.S.

2010-01-01

The study was conducted to evaluate the quality of effluents/ waste water samples from Rawalpindi region for irrigation purpose and to elucidate effects of their application on heavy metal contents in soils of area. Results indicated that the EC, SAR, RSC and TDS of most effluent/ waste water samples were above the critical limits. Cadmium and Cr were above the critical limits in almost all the effluent samples, whereas Ni was high in 14, Pb was high in 10, Cu was high in 5 and the Fe was high in 3 effluent samples as compared to critical limits. Regarding heavy metals contents of soils irrigated by these effluents/ waste water, total Fe, total Cd and total Ni were higher in almost all the sampled sites, whereas total Cr was high at 7 sampled sites. AB-DTPA extractable Fe and Zn were higher at all the sampled sites, while the extractable Cd was higher at 2 sampled sites. Overall, the effluent samples collected from Adiala showed high concentrations of heavy metals, whereas soils of Wah factory and Islamabad area had higher heavy metal contents (total and AB-DTPA extractable). On the basis of results it is concluded that quality of effluents/ waste water samples collected from different locations of Rawalpindi is not good for irrigation and the long term use of these effluents for crop production caused accumulation of some toxic metals in soils above critical limits which is harmful for soil health and may lead to elevated levels of heavy metals in crop plants. (author)

Rare earth elements and critical metal content of extracted landfilled material and potential recovery opportunities

Energy Technology Data Exchange (ETDEWEB)

Gutiérrez-Gutiérrez, Silvia C.; Coulon, Frédéric; Jiang, Ying; Wagland, Stuart, E-mail: s.t.wagland@cranfield.ac.uk

2015-08-15

Highlights: • Samples from multiple core drills were obtained from 4× landfill sites in the UK. • Each sample analysed for rare earth elements, critical metals and valuable metals. • Two stage microwave digestion method ensuring high yield. • High quantities of copper and aluminium were observed in the soil layers of landfill. • Across 4× landfills aluminium and copper present has a value of around $400 million. - Abstract: Rare earth elements (REEs), Platinum group metals (PGMs) and other critical metals currently attract significant interest due to the high risks of supply shortage and substantial impact on the economy. Their uses in many applications have made them present in municipal solid waste (MSW) and in commercial and industrial waste (C&I), since several industrial processes produce by-products with high content of these metals. With over 4000 landfills in the UK alone, the aim of this study was to assess the existence of these critical metals within landfills. Samples collected from four closed landfills in UK were subjected to a two-step acid digestion to extract 27 metals of interest. Concentrations across the four landfill sites were 58 ± 6 mg kg{sup −1} for REEs comprising 44 ± 8 mg kg{sup −1} for light REEs, 11 ± 2 mg kg{sup −1} for heavy REEs and 3 ± 1 mg kg{sup −1} for Scandium (Sc) and 3 ± 1.0 mg kg{sup −1} of PGMs. Compared to the typical concentration in ores, these concentrations are too low to achieve a commercially viable extraction. However, content of other highly valuable metals (Al and Cu) was found in concentrations equating to a combined value across the four landfills of around $400 million, which increases the economic viability of landfill mining. Presence of critical metals will mainly depend on the type of waste that was buried but the recovery of these metals through landfill mining is possible and is economically feasible only if additional materials (plastics, paper, metallic items and other) are

Mineral and heavy metal contents of the outer and inner tissues of commonly used fruits.

Science.gov (United States)

Özcan, Mehmet Musa; Harmankaya, Mustafa; Gezgin, Sait

2012-01-01

The rate of heavy metal pollution in some minor fruit samples growing at roadsides in Turkey were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The mineral contents of samples were found to be different depending on the several parts Citrus fruits. The highest minor and heavy metal levels for Citrus fruits were determined between 17.24 and 45.30 mg/kg boron, 2.08 and 15.05 mg/kg copper, 1.01 and 16.00 mg/kg iron and 2.35 and 9.87 mg/kg zinc. Boron content ranged from 16.54 mg/kg (Deveci pear inner pulp) to 89.89 mg/kg (Arjantin apple outer skin). The level of Fe ranged from 1.49 mg/kg (quince pulp) to 25.05 mg/kg (Ankara pear pulp). Cu content of fruits ranged between 2.52 mg/kg (Fuji apple skin) and 25.93 mg/kg quince skin). Zn content was found between 0.46 mg/kg (Golden apple pulp) and 14.34 mg/kg (quince skin). P contents ranged from 651 mg/kg (Golden apple pulp) to 1269 mg/kg (quince skin). Na was found between 500 mg/kg (Fuji apple skin) and 907 mg/kg (Arjantin apple skin).

Effect of polyphenol oxidase (PPO and air treatments on total phenol and tannin content of cocoa nibs

Directory of Open Access Journals (Sweden)

Brito Edy Sousa de

2002-01-01

Full Text Available Cocoa flavour is greatly influenced by polyphenols. These compounds undergo a series of transformations during cocoa processing leading to the characteristic cocoa flavour. The use of exogenous polyphenol oxidase (PPO proved to be useful to reduce polyphenol content in cocoa nibs. The effect of a PPO associated or not with air over total phenol and tannin content was evaluated. Cocoa nibs were autoclaved and treated with a PPO or water in the absence or presence of an air flow for 0.5, 1, 2 and 3 hours. Total phenol content was reduced in PPO or water treatments, but when associated with air there was an increase in phenol content. Tannin content was reduced only by the treatment with water and air.

The impact of sewage sludge treatment on the content of selected heavy metals and their fractions.

Science.gov (United States)

Ignatowicz, Katarzyna

2017-07-01

The aim of the study was to assess the physicochemical properties of compost made of municipal sewage sludge from selected Municipal Sewage Treatment Plant. Content of basic macroelements and heavy metals (Zn, Cu, Cr, Cd, Ni, Pb, Hg, Mg, Ca, N, P, K, Na) and their fractions was determined by means of BCR method. Based on the analyzes, it was found that the content of heavy metals in compost did not exceed the limits set by natural land management of sewage sludge; the compost is very abundant in biogenic elements - nitrogen and phosphorus - and it can be also considered a significant source of calcium and magnesium. The analysis of results obtained from the three-stage chemical extraction revealed that deposits subjected to aerobic stabilization and composting accumulate metals (in descending sequence) in fractions III and II, i.e. fractions virtually inaccessible to the ecosystem in optimal conditions of use. Copyright © 2017 Elsevier Inc. All rights reserved.

Characterization of metal and trace element contents of particulate matter (PM10) emitted by vehicles running on Brazilian fuels-hydrated ethanol and gasoline with 22% of anhydrous ethanol.

Science.gov (United States)

Ferreira da Silva, Moacir; Vicente de Assunção, João; de Fátima Andrade, Maria; Pesquero, Célia R

2010-01-01

Emission of fine particles by mobile sources has been a matter of great concern due to its potential risk both to human health and the environment. Although there is no evidence that one sole component may be responsible for the adverse health outcomes, it is postulated that the metal particle content is one of the most important factors, mainly in relation to oxidative stress. Data concerning the amount and type of metal particles emitted by automotive vehicles using Brazilian fuels are limited. The aim of this study was to identify inhalable particles (PM(10)) and their trace metal content in two light-duty vehicles where one was fueled with ethanol while the other was fueled with gasoline mixed with 22% of anhydrous ethanol (gasohol); these engines were tested on a chassis dynamometer. The elementary composition of the samples was evaluated by the particle-induced x-ray emission technique. The experiment showed that total emission factors ranged from 2.5 to 11.8 mg/km in the gasohol vehicle, and from 1.2 to 3 mg/km in the ethanol vehicle. The majority of particles emitted were in the fine fraction (PM(2.5)), in which Al, Si, Ca, and Fe corresponded to 80% of the total weight. PM(10) emissions from the ethanol vehicle were about threefold lower than those of gasohol. The elevated amount of fine particulate matter is an aggravating factor, considering that these particles, and consequently associated metals, readily penetrate deeply into the respiratory tract, producing damage to lungs and other tissues.

Total phosphorus, phytate phosphorus contents and the correlation of phytates with amylose in selected edible beans in Sri Lanka

Directory of Open Access Journals (Sweden)

Keerthana Sivakumaran

2018-02-01

Full Text Available Phytate a major anti nutritional factors in legumes and it accounts for larger portion of the total phosphorus, while limiting the bioavailablity of certain divalent cations to the human body. Legumes of eleven varieties cultivated in Sri Lanka, Mung bean (MI5, MI6, Cowpea (Waruni, MICP1, Bombay, Dhawala, ANKCP1, Soybean (MISB1, Pb1 and Horse gram (ANKBlack, ANKBrown were analyzed for phosphorus content and phytate content. Total phosphorus content was quantified by dry ashing followed by spectrophotometrical measurement of the blue colour intensity of acid soluble phosphate with sodium molybdate in the presence of ascorbic acid while phytate phosphorus using anion exchange chromatographic technique followed by spectrometrical measurement of the digested organic phosphorus and amylose content by Simple Iodine-Colourimetric method. Where the least value for phosphorus was observed 275.04 ±1.44 mg.100g-1 in ANKBlack (Horse gram and the highest in MISB1 (Soyabean with 654.94 ±0.05 mg.100g-1. The phytate phosphorus content (which is a ratio of phyate to total phosphorus was highest in Dhawala (Cowpea. The phytate phosphorus (which is a ratio of phyate to total phosphorus was highest in Dhawala with 67.42% and least in Bombay (Cowpea with 24.87%. The amylose content of the legumes was least in Pb1 with 8.71 ±0.13 mg.100mg-1 and the highest in MI6 22.58 ±0.71 mg.100mg-1. The correlation between phyate and total phosphorus was significant (p <0.05 and positive (r = 0.62. Similarly the correlation coefficient for phytate phosphorus and total phosphorus was significant (p <0.05 and positive (r = 0.63. Amylose content of legumes was significantly correlated negatively (p <0.05 with the total phytates content (r = -0.82.

Assessment of metals content in dandelion (Taraxacum officinale) leaves grown on mine tailings

Science.gov (United States)

Levei, Levente; Andrei, Mariana Lucia; Hoaghia, Maria Alexandra; Ozunu, Alexandru

2017-12-01

Dandelion (Taraxacum officinale) is one of the plant species that has the ability to spontaneously grow on mine tailings, due to its high tolerance for harsh environmental conditions (low nutrients level, high metal contents). The concentrations of Cd, Cu, Pb and Zn were determined in tailings and dandelion leaves grown on nonferrous mine tailings from Romania, while the metal accumulation was assessed by transfer factors (TFs) calculated as the ratio between the metal concentration in plant leaves and in tailings underneath. The results showed that the metal concentrations in tailings ranged between 0.4-8.0 mg/kg Cd, 20-1300 mg/kg Cu, 27-570 mg/kg Pb and 48-800 mg/kg Zn, while the metal concentrations in dandelion ranged between 0.2-4.8 mg/kg Cd, 6.2-17 mg/kg Cu, 0.5-75 mg/kg Pb and 27-260 mg/kg Zn. The TFs were below 0.8 for Cd and Zn and below 0.4 for Cu and Pb and decreased in the following order Cd≥Zn>Cu≥Pb, suggesting the Cd and Zn accumulation capability of dandelion.

Natural Remission of Major Periprosthetic Osteolysis following Total Hip Arthroplasty with Metal-on-Metal Bearings

Directory of Open Access Journals (Sweden)

Tatsuya Tamaki

2017-01-01

Full Text Available The natural course of adverse events following the use of metal-on-metal (MoM bearings in total hip arthroplasty (THA is not well known. In this article, we report the case of a patient with asymptomatic major acetabular osteolysis following MoM THA that diminished gradually without any surgical intervention. A 58-year-old male underwent one-stage bilateral MoM THA for bilateral osteoarthritis. Four years after THA, major acetabular osteolysis developed in his right hip without any local or systemic symptoms. The patient underwent a careful radiographic and clinical observation without any surgical intervention because he did not want to undergo revision surgery. The lesion gradually diminished after 7 years, and most of the osteolytic area was replaced by newly formed bone at 10 years. He continues to be followed with no evidence of cup loosening or migration. Our observation suggests that a periprosthetic osteolytic change related to the use of MoM bearings has the potential for natural remission.

Evaluation of heavy metals content in dietary supplements in Lebanon

Directory of Open Access Journals (Sweden)

Korfali Samira

2013-01-01

Full Text Available Abstract Background The consumption of dietary supplements is widely spread and on the rise. These dietary supplements are generally used without prescriptions, proper counseling or any awareness of their health risk. The current study aimed at analyzing the metals in 33 samples of imported dietary supplements highly consumed by the Lebanese population, using 3 different techniques, to ensure the safety and increase the awareness of the citizen to benefit from these dietary supplements. Results Some samples had levels of metals above their maximum allowable levels (Fe: 24%, Zn: 33%, Mn: 27%, Se: 15%, Mo: 12% of samples, but did not pose any health risk because they were below permitted daily exposure limit and recommended daily allowance except for Fe in 6% of the samples. On the other hand, 34% of the samples had Cu levels above allowable limit where 18% of them were above their permitted daily exposure and recommended daily allowance. In contrast, all samples had concentration of Cr, Hg, and Pb below allowable limits and daily exposure. Whereas, 30% of analyzed samples had levels of Cd above allowable levels, and were statistically correlated with Ca, and Zn essential minerals. Similarly 62% of the samples had levels of As above allowable limits and As levels were associated with Fe and Mn essential minerals. Conclusion Dietary supplements consumed as essential nutrients for their Ca, Zn, Fe and Mn content should be monitored for toxic metal levels due to their natural geochemical association with these essential metals to provide citizens the safe allowable amounts.

Evaluation of heavy metals content in dietary supplements in Lebanon.

Science.gov (United States)

Korfali, Samira Ibrahim; Hawi, Tamer; Mroueh, Mohamad

2013-01-18

The consumption of dietary supplements is widely spread and on the rise. These dietary supplements are generally used without prescriptions, proper counseling or any awareness of their health risk. The current study aimed at analyzing the metals in 33 samples of imported dietary supplements highly consumed by the Lebanese population, using 3 different techniques, to ensure the safety and increase the awareness of the citizen to benefit from these dietary supplements. Some samples had levels of metals above their maximum allowable levels (Fe: 24%, Zn: 33%, Mn: 27%, Se: 15%, Mo: 12% of samples), but did not pose any health risk because they were below permitted daily exposure limit and recommended daily allowance except for Fe in 6% of the samples. On the other hand, 34% of the samples had Cu levels above allowable limit where 18% of them were above their permitted daily exposure and recommended daily allowance. In contrast, all samples had concentration of Cr, Hg, and Pb below allowable limits and daily exposure. Whereas, 30% of analyzed samples had levels of Cd above allowable levels, and were statistically correlated with Ca, and Zn essential minerals. Similarly 62% of the samples had levels of As above allowable limits and As levels were associated with Fe and Mn essential minerals. Dietary supplements consumed as essential nutrients for their Ca, Zn, Fe and Mn content should be monitored for toxic metal levels due to their natural geochemical association with these essential metals to provide citizens the safe allowable amounts.

Heavy metal and trace element contents in edible muscle of three commercial fish species, and assessment of possible risks associated with their human consumption in Saudi Arabia

Directory of Open Access Journals (Sweden)

Sabry Mohamed El-Bahr

2015-09-01

Full Text Available Three different highly consumed fish species from Al-Ahsa market, Saudi Arabia namely Spangled emporer (Lethriuns nebulosus, Red striped seabream (Pagrus major and Black seabream (Spondyliosoma cantharus were evaluated for their muscle contents of heavy metals (e.g., Cd and Pb and trace elements (e.g., Cu, Zn, Fe and Mn. The possible risks associated with their human consumption were also studied. A total of 60 fresh fish samples comprising of 20 samples from each above mentioned fish were collected, and were subjected for determination of heavy metal and trace element contents by Atomic Absorption Spectrophotometry after Microwave Wet Digestion. The results showed that, accumulation patterns of the heavy metals and trace elements followed the order: Fe > Zn > Cu > Mn > Pb > Cd. There were variations among metal contents in the muscles of the three fish species; S. cantharus accumulated the highest levels of Cu, Zn and Mn, while the highest level of Fe could be detected in the muscles of P. major. The concentration of Cd and Pb remained comparable in the muscles of all three fish species. The calculated maximum daily intake (MDI values were found as 0.0003, 0.0009, 0.0035, 0.0001, 0.0000, 0.0000 mg/day/person for Cu, Zn, Fe, Mn, Cd and Pb, respectively. Conclusively, the present study indicated that, fish muscles contain relatively less burden of heavy metals and trace elements, and no health problem can be raised from human consumption of the examined commercial fishes at Al-Ahsa market, Saudi Arabia. [J Adv Vet Anim Res 2015; 2(3.000: 271-278

Phytochemical screening, antioxidant activity, total phenolic and total flavonoid contents of seven local varieties of Rosa indica L.

Science.gov (United States)

Zahid, Kiran; Ahmed, Maqsood; Khan, Farah

2018-05-01

Rosa indica symbol of godness and beauty known for various healing power, has astringent, sedative, anti-inflammatory and antidepressant qualities. Standard methods were used for qualitative detection of phyto-compounds, and quantitative detection of antioxidants was done using DPPH radical scavenging assay, total phenolics and total flavonoids content were expressed in mg GAE/g dry weight and mg QE/g dry weight. Results revealed phyto-compounds presence in all varieties under study however maximum % inhibition was observed by R. indica var pink perfume (94 ± 0.6) with IC50 value 0.3376 ± 0.01 mg/mL. Highest phenolic and flavonoid content was observed in the leaves extract of R. indica var cardinal red, i.e. 3.3553 ± 0.11 (ethanol) mg of Gallic acid equivalents (GAE)/g dry weight and 3.736 ± 0.001(ethanol) mg of quercetin equivalents (QE)/g dry weight, respectively, at conc. 0.125 mg/mL. Our finding provides evidence that all varieties of rose contain medicinally important bioactive compounds and justifies their use for treatment of different diseases.

Study of total phenol, flavonoids contents and phytochemical screening of various leaves crude extracts of locally grown Thymus vulgaris.

Science.gov (United States)

Hossain, Mohammad Amzad; AL-Raqmi, Khulood Ahmed Salim; AL-Mijizy, Zawan Hamood; Weli, Afaf Mohammed; Al-Riyami, Qasim

2013-09-01

To prepare various crude extracts using different polarities of solvent and to quantitatively evaluate their total phenol, flavonoids contents and phytochemical screening of Thymus vulgaris collected from Al Jabal Al Akhdar, Nizwa, Sultanate of Oman. The leave sample was extracted with methanol and evaporated. Then it was defatted with water and extracted with different polarities organic solvents with increasing polarities. The prepare hexane, chloroform, ethyl acetate, butanol and methanol crude extracts were used for their evaluation of total phenol, flavonoids contents and phytochemical screening study. The established conventional methods were used for quantitative determination of total phenol, flavonoids contents and phytochemical screening. Phytochemical screening for various crude extracts were tested and shown positive result for flavonoids, saponins and steroids compounds. The result for total phenol content was the highest in butanol and the lowest in methanol crude extract whereas the total flavonoids contents was the highest in methanol and the lowest hexane crude extract. The crude extracts from locally grown Thymus vulgaris showed high concentration of flavonoids and it could be used as antibiotics for different curable and uncurable diseases.

Antioxidant Contents and Antioxidant Activities of White and Colored Potatoes (Solanum tuberosum L.).

Science.gov (United States)

Lee, Sang Hoon; Oh, Seung Hee; Hwang, In Guk; Kim, Hyun Young; Woo, Koan Sik; Woo, Shun Hee; Kim, Hong Sig; Lee, Junsoo; Jeong, Heon Sang

2016-06-01

This study was performed to evaluate and compare the antioxidant substance content and antioxidant activities of white (Superior) and colored (Hongyoung, Jayoung, Jasim, Seohong, and Jaseo) potatoes. The potatoes were extracted with 80% ethanol and were evaluated for the total polyphenol, flavonoid, and anthocyanin contents and for 1,1-diphenyl- 2-picrylhydrazyl (DPPH)/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activity, reducing power, and ferrous metal ion chelating effect. The total polyphenol, flavonoid, and anthocyanin contents of Hongyoung and Jayoung were higher than white and other colored potatoes. All colored potato extracts, except for Jaseo and Seohong, showed higher ABTS radical scavenging activities than the general white potato extract. Hongyoung and Jayoung had the highest ABTS and DPPH radical scavenging activities. Optical density values for the reducing power of Jayoung and Jaseo at concentration of 2 mg/mL were 0.148 and 0.090, respectively. All colored potato extracts had lower ferrous metal ion chelating effect than the white potato. A significant (P<0.05) positive correlation was observed between total polyphenol content and total flavonoid content (r=0.919), anthocyanin content (r=0.992), and ABTS radical scavenging activity (r=0.897). Based on these results, this research may be useful in developing the Hongyoung and Jayoung cultivars with high antioxidant activities.

Beacon satellite studies and modelling of total electron contents of the ionosphere

International Nuclear Information System (INIS)

Tyagi, T.R.

1990-01-01

An attempt is made to highlight some of the beacon satellite studies, particularly those relating to total electron content (TEC) and scintillations, with special attention to Indian subcontinent observations. The modelling of TEC is described. The scope of new experiments for specific problem is indicated. (author). 78 refs., 12 figs

Total Phenolics, Flavonoids, Tannin Contents and Antioxidant Properties of Pleurotus ostreatus Cultivated on Different Wastes and Sawdust

Directory of Open Access Journals (Sweden)

Ayşenur Yılmaz

2017-01-01

Full Text Available In this study, the usage possibilities of some agro-industrial wastes such as; peanut wastes, potatoes farm wastes, walnut and orange tree sawdust in Pleurotus ostreatus cultivation were investigated and total phenolic, flavonoid, condensed tannin content and antioxidant properties of these methanolic mushroom extracts were examined. For the determination of the total phenolic contents, the Folin-Ciocalteau procedure was used. The content of total flavonoid present in the methanolic extracts was measured using a spectrophotometric assay. Condensed tannins were determined according to the method by Julkunen-Tıtto. The antioxidant capacity was determined using ferric reducing antioxidant power (FRAP and free radical scavenging activity of DPPH. The highest total phenolic content (2.672 ± 0.003 mg GAE/g was found in mushroom cultivated on walnut sawdust. The highest condensed tannin (1.011 ± 0.088 CE mg/g and ferric reducing antioxidant power (FRAP (12.332 ± 0.017 μmol FeSO4.7H2O/g were observed in the same mushroom extract. The highest total flavonoid and free radical scavenging activity of DPPH were found in extract of mushroom cultivated on potatoes handle. Bioactive properties of P. ostreatus cultivated on walnut tree sawdust were generally exhibited remarkable results.

Study of heavy metal in sewage sludge and in Chinese cabbage ...

African Journals Online (AJOL)

The study was performed to investigate the heavy metal content and availability for crops in sewage sludge and its accumulation in Chinese cabbage grown in sewage sludge amended soil. We determined the total and chemical fraction of As, Cr, Cd, Pb, Ni, Cu, Zn, Fe, Mg and Mn in sewage sludge and the total content of ...

Supercritical water treatment of heavy metal and arsenic metalloid-bioaccumulating-biomass.

Science.gov (United States)

Li, Jianxin; Chen, Jinbo; Chen, Shan

2018-08-15

Hyperaccumulator biomass, as a promising resource for renewable energy that can be converted into valuable fuel productions with high conversion efficiency, must be considered as hazardous materials and be carefully treated before further reuse due to the high contents of heavy metals. In this study, Pteris vittata L., an As-hyperaccumulator biomass was treated by an effective and environmental friendly method-supercritical water gasification (SCWG) using a bench-scale batch reactor. The contents of heavy metals (Cd, Pb and Zn) and arsenic metalloid in solid, liquid and gaseous products during SCWG process were thoroughly investigated. The speciation fractions including exchangeable, reducible, oxidizable and residual fractions of each heavy metal as the proportion of the total contents in solid residue were presented and the transformations trend of these heavy metals during the SCWG process was especially demonstrated. The significant operating parameters, including reaction temperature (395-445 °C), pressure (21-27 MPa) and residence time (0-40 min) were varied to explore their effects on the contents and forms. Moreover, the environmental risks of heavy metals in solid residues were evaluated based on risk assessment code, taking into consideration the speciation fractions and bioavailability. It was highlighted that although heavy metals particularly Pb and Zn tended to accumulate in solid residues with a maximum increment of about 50% in the total content, they were mostly converted to more stable oxidizable and residual fractions, and thus the ecotoxicity and bioavailability were greatly mitigated with no obvious increase in direct toxicity fractions. Each tested heavy metal presented no or low risk to the environments after SCWG treatments, meaning that the environmental pollution levels were markedly reduced with no or low risk to the environment. This study highlights the remarkable ability of SCWG for the heavy metal stabilization. Copyright �

Preliminary observations on the metal content in some milk samples from an acid geoenvironment

Directory of Open Access Journals (Sweden)

Alhonen, P.

1997-12-01

Full Text Available The metal content of some milk samples was analyzed from areas of acid sulphate soils along the course of the river Kyrönjoki in western Finland. Comparative analyses were made with samples from the Artjärvi-Porlammi area. The variations of analyzed metals AI, Ba, Ca, Cr, Cu, Fe, K, Mg, Mo, Na, Sr and Zn are not great in both areas except that of Al, which is clearly associated with the acid environment in the Kyrönjoki valley. The portions of these elements in milk are relatively high as compared with data from literature. It is obvious that they show environmental contamination. Under acid circumstances the metals in milk may create serious geomedical problems.

Nitrogen content determinations in different stages of thermal treatment involved in conversion of ammonium diuranate to uranium metal

International Nuclear Information System (INIS)

Shrivastava, K.C.; Shelke, G.P.

2017-01-01

Determination of nitrogen content in the uranium metal and uranium oxide based reactor fuels is important to meet the requirement of specifications given by fuel designer. Therefore, a systematic study was carried out to determine the variations in nitrogen content during the conversion of ammonium diuranate (ADU) to uranium oxides (UO 3 and UO 2 ), and finally to uranium metal by inert gas fusion-thermal conductivity detection (IGF-TCD) technique. To understand the measured nitrogen content variations, the thermal decomposition study of ADU was carried out using thermogravimetry (TG)/differential thermogravimetry (DTG) and differential thermal analysis (DTA) in the temperature range of 25-1073 K. Powder X-ray diffraction (XRD) technique was used to confirm the formation of uranium oxide precursors at different temperature. (author)

Clinical and radiological evolution of Intervened patients of total arthroplasty of hip with prostheses of resuperficialization metal-metal - Preliminary report

International Nuclear Information System (INIS)

Galvan Villamarin, Fernando; Bernal Torres, Fabio A; Paez, Jose Mauricio and others

2006-01-01

The articular degeneration of the hip in young patients requires including therapeutical alternatives for the management of this population. The resurfacing prostheses with metal-metal surfaces is an alternative for this type of patients. Reports with short and medium follow up are very promising, besides the different studies of laboratory that bear, the theoretical bases for their success. In this descriptive study, observational cases series type is described the radiological and clinical evolution of patients intervened of total arthroplasty of hip with resurfacing prostheses metal-metal in the hospital el Tunal of Bogota. The results of 31 hips are presented (27 patients) with an age average of 50 years old and a medium follow up of 16 months, with a good post surgical functional result with a median of 96 in the Harris Scores. The complications presented in the patient series are described and their relation with the different factors analyzed

Real life experimental determination of platinum group metals content in automotive catalytic converters

Science.gov (United States)

Yakoumis, I.; Moschovi, A. M.; Giannopoulou, I.; Panias, D.

2018-03-01

The real life experimental protocol for the preparation of spent automobile catalyst samples for elemental analysis is thoroughly described in the following study. Collection, sorting and dismantling, homogenization and sample preparation for X-Ray fluorescence spectroscopy and Atomic Adsorption Spectroscopy combined with Inductive coupled plasma mass spectrometry are discussed in detail for both ceramic and metallic spent catalysts. The concentrations of Platinum Group Metals (PGMs) in spent catalytic converters are presented based on typical consignments of recycled converters (more than 45,000 pieces) from the Greek Market. The conclusions clearly denoted commercial metallic catalytic foil contains higher PGMs loading than ceramic honeycombs. On the other hand, the total PGMs loading in spent ceramic catalytic converters has been found higher than the corresponding value for the metallic ones.

Total Phenolics and Total Flavonoids Contents and Hypnotic Effect in Mice of Ziziphus mauritiana Lam. Seed Extract

Directory of Open Access Journals (Sweden)

Aye Moh Moh San

2013-01-01

Full Text Available The seeds of Ziziphus mauritiana Lam. have been traditionally used for treatment of various complications including insomnia and anxiety. They are popularly used as sedative and hypnotic drugs in China, Korea, Myanmar, Vietnam, and other Asian countries. However, no scientific proof on hypnotic activity of Z. mauritiana seeds (ZMS was reported. In this study, the hypnotic activity of 50% ethanolic extract from ZMS was observed on the loss of righting reflex in mice using pentobarbital-induced sleep mice method. The contents of total phenolics and total flavonoids in the extract were also determined. The results showed that the 50% ethanolic extract from ZMS contained total phenolics  mg gallic acid equivalent (GAE/g extract and total flavonoids  mg quercetin equivalent (QE/g extract. Oral administration of the extract at the dose of 200 mg/kg significantly increased the sleeping time in mice intraperitoneally administered with sodium pentobarbital (50 mg/kg body weight. These results supported the traditional use of ZMS for the treatment of insomnia. The seeds of Z. mauritiana should be further developed as an alternative sedative and/or hypnotic product.

The Antioxidant Capacities and Total Phenolic Contents of Some Medicinal Plants in Iran

Directory of Open Access Journals (Sweden)

Ali Mirzaei

2011-12-01

Full Text Available Background & Objectives: Free radicals are highly reactive molecules may cause great damage to cell membranes and DNA and Result in inducing oxidation DNA mutations leading to cancer, degenerative, and other diseases. Plant antioxidant derived may be preventive of free radical damages. Methods & Materials: The Stems and flower sample of plants air-dried, finely ground and were extracted by ethanol: water (70:30 for 48 h. Extracts were filtered and dried under vacuum. The antioxidant activity of five ethanolic extract of medicinal plants (Descurainia Sophia, Plantago major, Trachyspermum copticum L, Coriandrum sativum and Trigonella foenum-graecum from Iran were analysed by five different methods [1,1-diphenyl-2-picrylhydrazyl (DPPH radical, 2,2,azinobis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS radical cation, Ferric-reducing antioxidant power assay (FRAP, phosphomolybdenum (PMB and reducing power (RP]. In addition, for determination of antioxidant components total phenolic content was also analyzed. Results: The total phenolic content of medicinal plant ranges from 74 to 154.3 mg Gallic acid/g extract as measured by the Folin–Ciocalteau method. Values of DPPH varied from 15.5 to 19.6 µmol trolex/g. FRAP ranged from 124.2 to 753 µmol of Fe(II/g extract. Antioxidant activity of the Plantago major was always higher compared to the other plants extracts values of total phenols content and antioxidant capacity by DPPH, ABTS, FRAP, (154.33 mg GAE/g, 1856 µmol trolox, 750 µmol trolox and 1169 µmol of Fe(II/g, extract respectively. The range of total antioxidant activity by phosphomolybdenum method was 513.3 to 870 µmol trolox/g. The reducing ability of the tested extracts was between 0.31-1.26. Plantago majorwas also highest activity in both tests. Conclusion: This study clearly demonstrated that Plantago major crude extract exhibit significant antioxidant activity.

Influence of Heavy Metal Stress on Antioxidant Status and DNA Damage in Urtica dioica

Directory of Open Access Journals (Sweden)

Darinka Gjorgieva

2013-01-01

Full Text Available Heavy metals have the potential to interact and induce several stress responses in the plants; thus, effects of heavy metal stress on DNA damages and total antioxidants level in Urtica dioica leaves and stems were investigated. The samples are sampled from areas with different metal exposition. Metal content was analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES, for total antioxidants level assessment the Ferric-Reducing Antioxidant Power (FRAP assay was used, and genomic DNA isolation from frozen plant samples was performed to obtain DNA fingerprints of investigated plant. It was found that heavy metal contents in stems generally changed synchronously with those in leaves of the plant, and extraneous metals led to imbalance of mineral nutrient elements. DNA damages were investigated by Random Amplified Polymorphic DNA (RAPD technique, and the results demonstrated that the samples exposed to metals yielded a large number of new fragments (total 12 in comparison with the control sample. This study showed that DNA stability is highly affected by metal pollution which was identified by RAPD markers. Results suggested that heavy metal stress influences antioxidant status and also induces DNA damages in U. dioica which may help to understand the mechanisms of metals genotoxicity.

Influence of heavy metal stress on antioxidant status and DNA damage in Urtica dioica.

Science.gov (United States)

Gjorgieva, Darinka; Kadifkova Panovska, Tatjana; Ruskovska, Tatjana; Bačeva, Katerina; Stafilov, Trajče

2013-01-01

Heavy metals have the potential to interact and induce several stress responses in the plants; thus, effects of heavy metal stress on DNA damages and total antioxidants level in Urtica dioica leaves and stems were investigated. The samples are sampled from areas with different metal exposition. Metal content was analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), for total antioxidants level assessment the Ferric-Reducing Antioxidant Power (FRAP) assay was used, and genomic DNA isolation from frozen plant samples was performed to obtain DNA fingerprints of investigated plant. It was found that heavy metal contents in stems generally changed synchronously with those in leaves of the plant, and extraneous metals led to imbalance of mineral nutrient elements. DNA damages were investigated by Random Amplified Polymorphic DNA (RAPD) technique, and the results demonstrated that the samples exposed to metals yielded a large number of new fragments (total 12) in comparison with the control sample. This study showed that DNA stability is highly affected by metal pollution which was identified by RAPD markers. Results suggested that heavy metal stress influences antioxidant status and also induces DNA damages in U. dioica which may help to understand the mechanisms of metals genotoxicity.

Radionuclides and heavy metal contents in phosphogypsum samples in comparison to cerrado soils

Energy Technology Data Exchange (ETDEWEB)

Jacomino, Vanusa Maria Feliciano; Oliveira, Kerley Alberto Pereira de, E-mail: vmfj@cdtn.b, E-mail: kapo@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Taddei, Maria Helena Tirollo; Nascimento, Marcos Roberto Lopes, E-mail: mhtaddei@cnen.gov.b, E-mail: pmarcos@cnen.gov.b [Laboratorio de Pocos de Caldas (LAPOC/CNEN-MG), MG (Brazil); Siqueira, Maria Celia, E-mail: mc.ufscar@gmail.co [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Quimica; Carneiro, Maria Eleonora Deschamps Pires, E-mail: eleonora.deschamps@meioambiente.mg.gov.b [Fundacao Estadual do Meio Ambiente (FEAM), Belo Horizonte, MG (Brazil). Gestao de Residuos Solidos; Silva, David Faria da; Mello, Jaime Wilson Vargas de, E-mail: davidf.agro@hotmail.co, E-mail: jwvmello@ufv.b [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Solos

2009-09-15

Phosphogypsum (PG) or agricultural gypsum, a solid waste from the phosphate fertilizer industry, is used as soil amendment, especially on soils in the Cerrado region, in Brazil. This material may however contain natural radionuclides and metals which can be transferred to soils, plants and water sources. This paper presents and discusses the results of physical and chemical analyses that characterized samples of PG and compares them to the results found in two typical soils of the Cerrado, a clayey and sandy one. These analyses included: solid waste classification, evaluation of organic matter content and of P, K, Ca, Mg, and Al concentrations and of the mineralogical composition. Natural radionuclides and metal concentrations in PG and soil samples were also measured. Phosphogypsum was classified as Class II A - not dangerous, not inert, not corrosive and not reactive. The organic matter content in the soil samples was low and potential acidity high. In the mean, the specific {sup 226}Ra activity in the phosphogypsum samples (252 Bq kg{sup -1}) was below the maximum level recommended by USEPA, which is 370 Bq kg{sup -1} for agricultural use. In addition, this study verified that natural radionuclides and metals concentrations in PG were lower than in the clayey Oxisol of Sete Lagoas, Minas Gerais, Brazil. These results indicated that the application of phosphogypsum as soil amendment in agriculture would not cause a significant impact on the environment. (author)

Radionuclides and heavy metal contents in phosphogypsum samples in comparison to cerrado soils

International Nuclear Information System (INIS)

Jacomino, Vanusa Maria Feliciano; Oliveira, Kerley Alberto Pereira de; Taddei, Maria Helena Tirollo; Nascimento, Marcos Roberto Lopes; Siqueira, Maria Celia; Carneiro, Maria Eleonora Deschamps Pires; Silva, David Faria da; Mello, Jaime Wilson Vargas de

2009-01-01

Phosphogypsum (PG) or agricultural gypsum, a solid waste from the phosphate fertilizer industry, is used as soil amendment, especially on soils in the Cerrado region, in Brazil. This material may however contain natural radionuclides and metals which can be transferred to soils, plants and water sources. This paper presents and discusses the results of physical and chemical analyses that characterized samples of PG and compares them to the results found in two typical soils of the Cerrado, a clayey and sandy one. These analyses included: solid waste classification, evaluation of organic matter content and of P, K, Ca, Mg, and Al concentrations and of the mineralogical composition. Natural radionuclides and metal concentrations in PG and soil samples were also measured. Phosphogypsum was classified as Class II A - not dangerous, not inert, not corrosive and not reactive. The organic matter content in the soil samples was low and potential acidity high. In the mean, the specific 226 Ra activity in the phosphogypsum samples (252 Bq kg -1 ) was below the maximum level recommended by USEPA, which is 370 Bq kg -1 for agricultural use. In addition, this study verified that natural radionuclides and metals concentrations in PG were lower than in the clayey Oxisol of Sete Lagoas, Minas Gerais, Brazil. These results indicated that the application of phosphogypsum as soil amendment in agriculture would not cause a significant impact on the environment. (author)

In vitro anthelmintic activity of Barleria buxifolia on Indian adult earthworms and estimation of total flavonoid content

Directory of Open Access Journals (Sweden)

Purna A. Chander

2014-02-01

Full Text Available Objective: To study the anthelmintic activity of Barleria buxifolia leaf and to estimate the total flavonoid content. Methods: The aqueous and ethanolic leaf extracts were prepared and these were analyzed for total flavonoid content by aluminium chloride colorimetric method and Pheretima posthuma was used for anthelmintic activity by using the different concentrations (10, 20, 40, 80 and 100 mg/mL. Results: All the investigational extracts showed an anthelmintic activity at concentration of 10 mg/mL. The ethanolic extract of 100 mg/mL has produced an significant effect (P<0.001 when compared to aqueous extract. The total flavonoid content was found to be 5.67 mg QE/100 g. Conclusions: From the above study, the leaf extract has shown a good anthelmintic activity.

Phytochemical constituents, antioxidant activity, total phenolic and flavonoid contents of Arisarum vulgare seeds

OpenAIRE

Hadjer Kadri; Salah Eddine Djilani; Abdelouaheb Djilani

2013-01-01

Background.Arisarum vulgare is screened and its total phenolic compounds and total flavonoid contents were measured. In addition, the antioxidant capacity of the methanol-water (7:3) extract of this plant is evalu- ated by DPPH (2,2-diphenyl-1 picrylhydrazyl) and ABTS (2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfon- ic)) tests expressed by Vitamin C Equivalent Antioxidant Capacity (VCEAC). HPLC analyses are carried out to identify some polyphenols. The aim of this study is to identify, ...

Heavy metals and metalloids in egg contents and eggshells of passerine birds from Arizona

International Nuclear Information System (INIS)

Mora, Miguel A.

2003-01-01

High concentrations of Sr in eggshells may be associated with lower hatching success of some passerine birds. - Concentrations of inorganic elements were determined in eggs of passerine birds including the endangered southwestern willow flycatcher (Empidonax traillii extimus) from four regions in Arizona. The main aim of the study was to determine the distribution of metals in egg contents and eggshells, with emphasis on the deposition of Sr in eggshells. Seventy eggs of 11 passerine species were collected at four nesting locations during 2000. Aluminum, Ba, Cr, Cu, Mn, Se, Sr, and Zn, were detected primarily in egg contents of all bird species. Arsenic, Ni, Pb, and V were detected primarily in eggshells. A proportion of most inorganic elements accumulated in the eggshell. Concentrations of Ba, Cu, Mn, Se, Sr, and Zn in egg contents and As, Ba, Cu, and V in eggshells of yellow-breasted chats (Icteria virens) were similar among locations. However, concentrations of Mn, Ni, Sr, and Zn in eggshells were significant different among locations. Except for Cu, Mn, Se, and Zn, concentrations of inorganic elements were 2-35 times greater in eggshells than in eggs. Most concentrations of metals and metalloids in eggs and eggshells of all the bird species were below levels known to affect reproduction or that have other deleterious effects. However, I found somewhat elevated concentrations of Sr in eggshells (highest mean=1505 μg/g dw, n=3) of yellow-breasted chats and willow flycatchers, and in egg contents of yellow warblers (Dendroica petechia) and song sparrows (Melospiza melodia). Whether current observed concentrations of Sr in eggshells are affecting nesting birds in Arizona remains to be determined. Strontium and other metals could be associated with lower hatching success in some areas. This study shows that a proportion of many inorganic elements accumulates in the eggshell and that the potential effects on the proper structure and functioning of the eggshell

Sediment matrix characterization as a tool for evaluating the environmental impact of heavy metals in metal mining, smelting, and ore processing areas.

Science.gov (United States)

Ružičková, Silvia; Remeteiová, Dagmar; Mičková, Vladislava; Dirner, Vojtech

2018-02-21

In this work, the matrix characterization (mineralogy, total and local chemical composition, and total organic (TOC) and inorganic carbon (TIC) contents) of different types of sediments from mining- and metallurgy-influenced areas and the assessment of the impact of the matrix on the association of potentially hazardous metals with the mineral phases of these samples, which affect their mobility in the environment, are presented. For these purposes, sediment samples with different origins and from different locations in the environment were analyzed. Anthropogenic sediments from metal-rich post-flotation tailings (Lintich, Slovakia) represent waste from ore processing, natural river sediments from the Hornád River (Košice, Slovakia) represent areas influenced predominantly by the metallurgical industry, and lake sediments from a water reservoir Ružín (inflow from the Hornád and Hnilec Rivers, Slovakia) represent the impact of the metallurgical and/or mining industries. The total metal contents were determined by X-ray fluorescence (XRF) analysis, the local chemical and morphological microanalysis by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and the TOC and TIC contents by infrared (IR) spectrometry. The mobility/bioavailability of Cu, Pb, and Zn in/from sediments at the studied areas was assessed by ethylenediaminetetraacetic acid (EDTA) and acetic acid (AA) extraction and is discussed in the context of the matrix composition. The contents of selected potentially hazardous elements in the extracts were determined by the high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS).

Analysis of total hydrogen content in palm oil and palm kernel oil ...

African Journals Online (AJOL)

A fast and non-destructive technique based on thermal neutron moderation has been used for determining the total hydrogen content in two types of red palm oil (dzomi and amidze) and palm kernel oil produced by traditio-nal methods in Ghana. An equipment consisting of an 241Am-Be neutron source and 3He neutron ...

Dynamic re-weighted total variation technique and statistic Iterative reconstruction method for x-ray CT metal artifact reduction

Science.gov (United States)

Peng, Chengtao; Qiu, Bensheng; Zhang, Cheng; Ma, Changyu; Yuan, Gang; Li, Ming

2017-07-01

Over the years, the X-ray computed tomography (CT) has been successfully used in clinical diagnosis. However, when the body of the patient to be examined contains metal objects, the image reconstructed would be polluted by severe metal artifacts, which affect the doctor's diagnosis of disease. In this work, we proposed a dynamic re-weighted total variation (DRWTV) technique combined with the statistic iterative reconstruction (SIR) method to reduce the artifacts. The DRWTV method is based on the total variation (TV) and re-weighted total variation (RWTV) techniques, but it provides a sparser representation than TV and protects the tissue details better than RWTV. Besides, the DRWTV can suppress the artifacts and noise, and the SIR convergence speed is also accelerated. The performance of the algorithm is tested on both simulated phantom dataset and clinical dataset, which are the teeth phantom with two metal implants and the skull with three metal implants, respectively. The proposed algorithm (SIR-DRWTV) is compared with two traditional iterative algorithms, which are SIR and SIR constrained by RWTV regulation (SIR-RWTV). The results show that the proposed algorithm has the best performance in reducing metal artifacts and protecting tissue details.

Metal release and metal allergy after total hip replacement with resurfacing versus conventional hybrid prosthesis 5-year follow-up of 52 patients

DEFF Research Database (Denmark)

Gustafson, Klas; Jakobsen, Stig S; Lorenzen, Nina D

2014-01-01

to an increased incidence of metal allergy. METHODS: 52 hips in 52 patients (median age 60 (51-64) years, 30 women) were randomized to either a MOM hip resurfacing system (ReCap) or a standard MOP total hip arthoplasty (Mallory Head/Exeter). Spot urine samples were collected preoperatively, postoperatively, after....... RESULTS: A statistically significant 10- to 20-fold increase in urinary levels of cobalt and chromium was observed throughout the entire follow-up in the MOM group. The prevalence of metal allergy was similar between groups. INTERPRETATION: While we observed significantly increased levels of metal ions...

Heavy metal (Pb, Cu, Zn and Cd content in wine produced from grape cultivar Mavrud, grown in an industrially polluted region

Directory of Open Access Journals (Sweden)

Violina Angelova

1999-09-01

Full Text Available The investigation was carried out in the period 1991-1993 with cv. Mavrud, grown in the region with a major industrial pollutant the Non-Ferrous-Metal Works (NFMW and a region with no industrial pollutants (as a control. The heavy metal content in soil, grapes and wine was determined. Most of the heavy metals in the grapes precipitate during fermentation into the sediments, which is the reason for their significantly lower content in the wine. Water washing of grape before processing leads to about 2 time decrease in the Pb, Cu, Zn and Cd contents of wine. The pre-washing of grapes does not lead to any quality deterioration in the wine produced. The amounts of Cu, Zn and Cd in the wine from cv. Mavrud, grown in the region of the NFMW-Plovdiv, are lower than the maximum admissible levels, while the Pb content exceeds them about two times.

Trace Metal Content of Sediments Close to Mine Sites in the Andean Region

Directory of Open Access Journals (Sweden)

Cristina Yacoub

2012-01-01

Full Text Available This study is a preliminary examination of heavy metal pollution in sediments close to two mine sites in the upper part of the Jequetepeque River Basin, Peru. Sediment concentrations of Al, As, Cd, Cu, Cr, Fe, Hg, Ni, Pb, Sb, Sn, and Zn were analyzed. A comparative study of the trace metal content of sediments shows that the highest concentrations are found at the closest points to the mine sites in both cases. The sediment quality analysis was performed using the threshold effect level of the Canadian guidelines (TEL. The sediment samples analyzed show that potential ecological risk is caused frequently at both sites by As, Cd, Cu, Hg, Pb, and Zn. The long-term influence of sediment metals in the environment is also assessed by sequential extraction scheme analysis (SES. The availability of metals in sediments is assessed, and it is considered a significant threat to the environment for As, Cd, and Sb close to one mine site and Cr and Hg close to the other mine site. Statistical analysis of sediment samples provides a characterization of both subbasins, showing low concentrations of a specific set of metals and identifies the main characteristics of the different pollution sources. A tentative relationship between pollution sources and possible ecological risk is established.

Safety of Potato Consumption in Slovak Region Contaminated by Heavy Metals due to Previous Mining Activity

Directory of Open Access Journals (Sweden)

Janette Musilova

2017-01-01

Full Text Available Heavy metals are among the most serious environmental contaminants in mining districts. Soil, as one of the main components of the environment, is the place of heavy metal entry into plants and consequently into the food chain, too. Potatoes grown in the region of Middle Spis (Slovakia may be a source of increased content of heavy metals and pose a health risk to the consumer. The contents of heavy metals (Cd, Pb, and Ni in potato and soil samples were determined using the AAS method and compared with limit values set by the Slovak Republic and the European Union. The content of heavy metals was determined in 12 potato cultivars with different length of vegetation period (mid-early, very early, and early, resp., which were grown in three localities with a highly disturbed environment. Total contents and mobile forms of heavy metals as well as physical and chemical properties were determined in soil samples which were collected from the same sampling sites. Only Pb content in potato tubers was higher than the hygienic limit value (0.1 mg kg−1 FM in 15 sampling sites (interval was n.d. –0.2298 mg kg−1 FM. The contents of exchangeable forms (total content of heavy metals in soil were ranged between the intervals: Cd 0.004–0.055 (0.94–1 56, Pb 0.023–0.295 (17.00–26.80, and Ni 0.019–0.475 (30.80–71.00 mg kg−1. At current average consumption levels of potatoes, tolerable weekly intake (TWI or tolerable daily intake (TDI for observed heavy metals was not exceeded.

[Contents mensuration of total alkaloid in Uncaria rhynchophylla by acid dye colorimetry].

Science.gov (United States)

Zeng, Chang-qing; Luo, Bei-liang

2007-08-01

To investigate the method of determination of total alkaloids Uncaria rhynchophylla. The Contents of total Alkaloid were determined by Acid dye Colorimetry. Acid dye color conditions: pH3.6 buffer 5.0 ml, bromocresol green liquid 5.0 ml; chloroform extraction three times, each time was exeracted for 2 minutes, put it aside for at least 5 minutes for the determination of the best method. Rhynchophylline 6.018 microg - 108.324 microg in the linear range, Recoveriys rate was 97.19%, RSD was 1.34% (n = 6). The method is simple, highly sensitive and reproducible.

Validation of Transfer Functions Predicting Cd and Pb Free Metal Ion Activity in Soil Solution as a Function of Soil Characteristics and Reactive Metal Content

NARCIS (Netherlands)

Pampura, T.; Groenenberg, J.E.; Lofts, S.; Priputina, I.

2007-01-01

According to recent insight, the toxicity of metals in soils is better related to the free metal ion (FMI) activity in the soil solution than to the total metal concentration in soil. However, the determination of FMI activities in soil solution is a difficult and time-consuming task. An alternative

Determination of Heavy Metals in Raw Milk Produced in Tangshan City, China

Directory of Open Access Journals (Sweden)

Li Aijun

2016-01-01

Full Text Available The objective of this study was to investigate the content of heavy metals (Arsenic, Lead, Chromium and Mercury in raw milk of Tangshan. Samples were obtained directly from dairy farms in Tangshan City. A total of 55 raw milk samples were collected in 2012, a total of 150 raw milk samples and 150 in 2013 and 2014 respectively. All the samples were analyzed by ICP-MS (Inductively Coupled Plasma Mass Spectrometry method-based on China National Standard. In general, heavy metals (Arsenic, Lead, Chromium and Mercury of raw milk in Tangshan were relatively safe for people’s health because none of those heavy metals (Arsenic, Lead, Chromium and Mercury contents exceeded the Maximum Limit set by China.

Effects of preparation method and active metal content on of Ni/kieselguhr catalyst activity

International Nuclear Information System (INIS)

Galuh Widiyarti; Wuryaningsih Sri Rahayu

2010-01-01

The preparation and the active metal content influence the activity of catalyst. Study has been conducted to see the activity of Ni/kieselguhr based on preparation method and Nickel (Ni) contents in the catalyst in the laboratory scale. The Ni/kieselguhr catalyst were prepared by impregnation and precipitation methods, with Ni active contents of 10, 20, and 30 % by weight. The catalysts characterization was analyzed using X-Ray Diffraction (XRD). Catalysts activities were analyzed based on decreasing of iodine number from hydrogenation of crude palm oil for 2 hours. The activity tests results show that precipitation catalysts are more active than impregnation catalysts. The decreasing in iodine number of fatty acid after 2 hours of hydrogenation process using precipitation catalysts and impregnation catalysts are 51.53 and 21.85 %, respectively. In addition, the catalysts are more active with increasing Ni contents. (author)

TRACE METAL CONTENT (Cu, Zn, Mn AND Fe) IN URTICA DIOICA L. AND PLANTAGO MAJOR L.

Science.gov (United States)

Krolak, Elzbieta; Raczuk, Jolanta; Borkowska, Lidia

2016-11-01

The aim of the study was to compare the contents of Cu, Zn, Mn and Fe in the washed and unwashed leaves and roots of two plant species: Urica dioica L. and Plantago major L., used in herbal medicine. These two herb species occur in the same environmental habitats, yet their morphological structure is different. The soil and plant samples for analyses were collected from an uncontaminated area in Eastern Poland. In each habitat location, the samples were taken from sandy soils with slightly acidic and neutral pH values. The obtained results showed that U. dioica and P. major accumulated similar amounts of trace metals, such as: Cu, Zn and Fe, in leaves, despite the differences in the morphological structure of their overground parts. The content of Mn in leaves U. dioica was about twice as much as in P. major. Also, no differences in the metal content were observed between washed and unwashed leaves of both species. However, in the same habitat conditions, a significantly higher content of Cu, Zn and Mn was found in the roots of P. major than U. dioica. The content of Fe in the roots was similar in both species. P. major and U. dioica may be a valuable source of microelements, if they are obtained from unpolluted habitats.

ANTIOXIDANT ACTIVITY AND TOTAL PHENOLIC CONTENT OF GRAPE SEEDS AND PEELS FROM ROMANIAN VARIETIES

Directory of Open Access Journals (Sweden)

Mădălina IUGA

2017-12-01

Full Text Available Grape seeds and peels are valuable by-products from wine production industry that can be valorized in food production. Both grape seeds and peels have a great amount of antioxidants and polyphenolic compounds. The aim of this study was to investigate the total phenolic content of red and white grape seeds and peels and to establish the optimal solvent concentration for highest extraction yield. For this purpose, Folin Ciocâlteu method was used to achieve the phenols content and the antioxidant activity was estimated using 2,2 – diphenyl-1-1picrylhydrazyl (DPPH reagent. The total phenolic content ranged from 81.13 mg GAE/g for red peels, 93.47 mg GAE/g for white peels, to 128.47 mg GAE/g for red seeds and 164.70 mg GAE/g for white seeds. The One-Way ANOVA method was used to see if there are differences between the antioxidant activities depending on the solvent concentration. The results showed that the methanol concentration significantly (p < 0.05 influences the antioxidants extraction. The inhibition percent IC50 ranged from 0,24 to 4,37 μg/mL for white peels, from 3,12 to 6,29 μg/mL for red peels, from 5,53 to 5,90 μg/mL for white seeds and from 4,59 to 6,14 μg/mL for red seeds. This study highlighted the possibility to use grape seeds and peels as food ingredients or natural antioxidant to extend the shelf life of food, especial of lipids and lipid-containing foods because of their high antioxidant activity and total phenolic content.

Tailored plasmon-induced transparency in attenuated total reflection response in a metal-insulator-metal structure.

Science.gov (United States)

Matsunaga, Kouki; Hirai, Yusuke; Neo, Yoichiro; Matsumoto, Takahiro; Tomita, Makoto

2017-12-19

We demonstrated tailored plasmon-induced transparency (PIT) in a metal (Au)-insulator (SiO 2 )-metal (Ag) (MIM) structure, where the Fano interference between the MIM waveguide mode and the surface plasmon polariton (SPP) resonance mode induced a transparency window in an otherwise opaque wavenumber (k) region. A series of structures with different thicknesses of the Ag layer were prepared and the attenuated total reflection (ATR) response was examined. The height and width of the transparency window, as well as the relevant k-domain dispersion, were controlled by adjusting the Ag layer thickness. To confirm the dependency of PIT on Ag layer thickness, we performed numerical calculations to determine the electric field amplitude inside the layers. The steep k-domain dispersion in the transparency window is capable of creating a lateral beam shift known as the Goos-Hänchen shift, for optical device and sensor applications. We also discuss the Fano interference profiles in a ω - k two-dimensional domain on the basis of Akaike information criteria.

Effect of Increasing Total Solids Contents on Anaerobic Digestion of Food Waste under Mesophilic Conditions: Performance and Microbial Characteristics Analysis

OpenAIRE

Yi, Jing; Dong, Bin; Jin, Jingwei; Dai, Xiaohu

2014-01-01

The total solids content of feedstocks affects the performances of anaerobic digestion and the change of total solids content will lead the change of microbial morphology in systems. In order to increase the efficiency of anaerobic digestion, it is necessary to understand the role of the total solids content on the behavior of the microbial communities involved in anaerobic digestion of organic matter from wet to dry technology. The performances of mesophilic anaerobic digestion of food waste...

Heavy metal pollution in vegetables grown in the vicinity of a multi-metal mining area in Gejiu, China: total concentrations, speciation analysis, and health risk.

Science.gov (United States)

Li, Yanyan; Wang, Hongbin; Wang, Haijuan; Yin, Fei; Yang, Xiaoyan; Hu, Yongjun

2014-11-01

A field survey was conducted to investigate the present situation and health risk of arsenic (As), lead (Pb), cadmium (Cd), copper (Cu), and zinc (Zn) in soils and vegetables in a multi-metal mining area, Gejiu, China. Furthermore, three vegetables (water spinach, potato, and summer squash) containing high metal concentrations were selected to further analyze metal speciation. The results showed that the average concentrations of five metals in soil exceeded the limiting values, and their bioavailable concentrations were significantly positively correlated to the total ones. Heavy metals in the edible parts of vegetables also exceeded the corresponding standards. The leaves of pakchoi, peppermint, and coriander had a strong metal-accumulative ability and they were not suitable for planting. Except the residue forms, the main forms of metals in the edible parts of three selected vegetables were ethanol-, NaCl-, and HAc-extractable fractions for As, Pb, and Cd, respectively; however, Cu was mainly presented as NaCl-extractable and Zn as HAc-extractable fractions. A high proportion of ethanol-extractable As showed that As bioactivity and toxic effects were the highest. Although the total and bioavailable Cd were high in soil, its speciation in vegetables was mainly presented as HAc-extractable fraction, which has a relatively low bioactivity. Lead and arsenic were imposing a serious threat on the local residents via vegetable consumption.

Soil fertility and plant diversity enhance microbial performance in metal-polluted soils.

Science.gov (United States)

Stefanowicz, Anna M; Kapusta, Paweł; Szarek-Łukaszewska, Grażyna; Grodzińska, Krystyna; Niklińska, Maria; Vogt, Rolf D

2012-11-15

This study examined the effects of soil physicochemical properties (including heavy metal pollution) and vegetation parameters on soil basal respiration, microbial biomass, and the activity and functional richness of culturable soil bacteria and fungi. In a zinc and lead mining area (S Poland), 49 sites were selected to represent all common plant communities and comprise the area's diverse soil types. Numerous variables describing habitat properties were reduced by PCA to 7 independent factors, mainly representing subsoil type (metal-rich mining waste vs. sand), soil fertility (exchangeable Ca, Mg and K, total C and N, organic C), plant species richness, phosphorus content, water-soluble heavy metals (Zn, Cd and Pb), clay content and plant functional diversity (based on graminoids, legumes and non-leguminous forbs). Multiple regression analysis including these factors explained much of the variation in most microbial parameters; in the case of microbial respiration and biomass, it was 86% and 71%, respectively. The activity of soil microbes was positively affected mainly by soil fertility and, apparently, by the presence of mining waste in the subsoil. The mining waste contained vast amounts of trace metals (total Zn, Cd and Pb), but it promoted microbial performance due to its inherently high content of macronutrients (total Ca, Mg, K and C). Plant species richness had a relatively strong positive effect on all microbial parameters, except for the fungal component. In contrast, plant functional diversity was practically negligible in its effect on microbes. Other explanatory variables had only a minor positive effect (clay content) or no significant influence (phosphorus content) on microbial communities. The main conclusion from this study is that high nutrient availability and plant species richness positively affected the soil microbes and that this apparently counteracted the toxic effects of metal contamination. Copyright © 2012 Elsevier B.V. All rights

Applications of Total Scattering & Pair Distribution Function Analysis in Metal-Organic Framework Materials

DEFF Research Database (Denmark)

Xu, Hui; Birgisson, Steinar; Sommer, Sanna

structure. At the same time, there is an ongoing debate on whether the SBU is present prior, or during MOF crystallization in MOF chemistry. However, little is known about MOFs formation mechanism. Currently techniques to study the in situ MOF formation process mainly focused on after......-crystallization process, for example in situ XRD and SAXS/WAXS study on MOF formation. However, the pre-crystallization process in the early stage of MOF formation is still unexplored. In this project, total scattering and PDF study will be carried out to explore the MOF formation process in early stage. This includes......Metal-Organic Frameworks (MOFs) is constructed by metal-oxide nodes and organic ligands. The formation of different structures of metal-oxide nodes (also called secondary building units, SBU) is crucial for MOF final structures, because the connectivity of SBU greatly influence the final MOF...

Analysis of caffeine and heavy metal contents in branded and unbranded tea available in Pakistan

International Nuclear Information System (INIS)

Khan, S.R.; Inayat, A.; Chowdhry, M.N.; Waheed, A.

2010-01-01

In the investigation of caffeine and heavy metal contents in four branded and six unbranded tea samples collected from local markets of Lahore, Faisalabad and Peshawar, the amount of caffeine and heavy metals in all the branded tea samples were in agreement with the international standards. In unbranded tea samples, though the amount of caffeine was within standard limits but two of the samples collected from Peshawar had high concentrations of lead being, 13.69 and 15.78 mg/kg, consumption of which can lead to serious problems. (author)

Suspended matter and heavy metal content of the Elbe Estuary

International Nuclear Information System (INIS)

Vollbrecht, K.

1980-01-01

(1) In the River Elbe estuary there is a turbidity zone which is closely bound to the region of brackish waters. Its suspended matter content changes strongly with the tidal rhythm. Suspended matter and river bed sediments influence each other by exchanging their particles. Owing to that mechanism, the heavy metal ions bound or taken up by the suspended matter (sorption) enter the sediments. To obtain an estimation of the estuary's ability to cope with ( self purify ) a strong burden of industrial wastes, it is neccessary to take into consideration the absorbing capacity of both the mean suspension load and the sediments. (2) The concentration of nearly all heavy metal ions investigated in the suspension load decreases remarkably at the very beginning of the turbid zone already, in the Hamburg region. It indicates that the binding process are going on very rapidly and that the metal ion absorbing capacity of the Elbe estuary still requires only the first few miles of this self purification system. The results gained indicate that the suspended matter in Hamburg waters could bind or take up more heavy metal ions than are discharged into this area. (3) The concentration of most ions bound to the suspension material correlates very well with the grain size distribution of the (anorganic) particles. The concentration values decrease along the estuary and lead to a continuous transition to the values of the open sea. Cu, Ni and Cd appear to be captured preferably by organic suspended matter. This behaviour, however, is solely restricted to the turbid zone. In the open sea, after oxidation of the binding organic material, Cu and Ni correspond to the anorganic grain size distribution. (orig./HP) [de

Antioxidant, Cytotoxic Activities and Total Phenolic Content of Four Indonesian Medicinal Plants

Directory of Open Access Journals (Sweden)

Waras Nurcholis

2017-03-01

Full Text Available The crude ethanol extracts of four Indonesian medicinal plants namely Curcuma xanthorrhiza Roxb.,Phyllanthus niruri Linn., Andrographis paniculata Ness., and Curcuma aeruginosa Roxb. wereexamined for their antioxidant (radical scavenging activity using 2, 2-diphenyl-2-picrylhydrazyl(DPPH free radical and cytotoxicity using brine shrimp lethality test (BSLT. The total phenoliccontent was used the Folin-Ciocalteu method. IC50 values for DPPH radical scavenging activityranged from 14.5 to 178.5 μg/ml, with P. niruri having the lowest value and therefore the mostpotent, and C. aeruginosa having the highest value. LC50 values for BSLT ranged from 210.3 to593.2 μg/ml, with C. xanthorrhiza and A. paniculata having the lowest and highest values,respectively. The total phenolic content of the Indonesian plants ranged from 133.0 ±3.7 to863.3±54.7 mg tannic acid equivalent per 1 g extract, with C. aeruginosa and P. niruri having thelowest and highest values, respectively. A positive correlation between free radical scavengingactivity and the content of phenolic compounds was found in the four of Indonesian medicinal plants.

Composición elemental y contenido de metales en sedimentos marinos de la bahía Mejillones del Sur, Chile: evaluación ambiental de la zona costera Elemental composition and metal contents in the marine sediments of Mejillones del Sur Bay, Chile: an environmental assessment of the coastal zone

Directory of Open Access Journals (Sweden)

Jorge Valdés

2009-01-01

Full Text Available Se midió la concentración de carbono total, nitrógeno total, azufre total, materia orgánica, Ni, Cd, Pb, Cu y Zn en sedimentos costeros (10 m de profundidad de columna de agua de ocho sectores de la bahía Mejillones. La composición elemental de los sedimentos sería el resultado de la abundante materia orgánica autóctona presente en este sistema costero. El orden de abundancia de los metales analizados fue: Zn > Cu > Ni > Pb > Cd. La concentración de metales no se explicaría por el contenido de materia orgánica ni la composición granulométrica de los sedimentos costeros. La evaluación del contenido de metales en los sedimentos, mostró que el Ni, Zn y Pb estarían levemente enriquecidos en la actualidad, aún cuando los valores se mantienen dentro de un rango cercano a los niveles preindustriales. El análisis del dendrograma de similitud de los sectores de estudio separó la línea de costa de Mejillones en dos grandes zonas; una asociada a la actividad industrial desarrollada en la bahía, y otra correspondiente al área de desarrollo urbano de Mejillones con características similares a aquellos ambientes libres de actividad antrópica directa.The total carbon, total nitrogen, total sulphur, organic matter, Ni, Cd, Pb, Cu, and Zn concentrations were measured in coastal sediments (10 m water depth at eight stations in Mejillones Bay. The elemental composition of these sediments is a function of the autochthonous organic matter generated in this coastal system. The order of abundance for the metals was: Zn > Cu > Ni > Pb > Cd. The metal content is not explained by the organic matter content or grain size of these coastal sediments. The evaluation of the concentration metals in the sediments showed that Ni, Zn, and Pb are slightly enriched at the present, although with values that are similar to preindustrial concentrations. A cluster analysis of the similarity in the study area separated the Mejillones coast into two main zones

Modeling of the Ionospheric Scintillation and Total Electron Content Observations during the 21 August 2017 Total Solar Eclipse

Science.gov (United States)

Datta-Barua, S.; Gachancipa, J. N.; Deshpande, K.; Herrera, J. A.; Lehmacher, G. A.; Su, Y.; Gyuk, G.; Bust, G. S.; Hampton, D. L.

2017-12-01

High concentration of free electrons in the ionosphere can cause fluctuations in incoming electromagnetic waves, such as those from the different Global Navigation Satellite Systems (GNSS). The behavior of the ionosphere depends on time and location, and it is highly influenced by solar activity. The purpose of this study is to determine the impact of a total solar eclipse on the local ionosphere in terms of ionospheric scintillations, and on the global ionosphere in terms of TEC (Total Electron Content). The studied eclipse occurred on 21 August 2017 across the continental United States. During the eclipse, we expected to see a decrease in the scintillation strength, as well as in the TEC values. As a broader impact part of our recently funded NSF proposal, we temporarily deployed two GNSS receivers on the eclipse's totality path. One GNSS receiver was placed in Clemson, SC. This is a multi-frequency GNSS receiver (NovAtel GPStation-6) capable of measuring high and low rate scintillation data as well as TEC values from four different GNSS systems. We had the receiver operating before, during, and after the solar eclipse to enable the comparison between eclipse and non-eclipse periods. A twin receiver collected data at Daytona Beach, FL during the same time, where an 85% partial solar eclipse was observed. Additionally, we set up a ground receiver onsite in the path of totality in Perryville, Missouri, from which the Adler Planetarium of Chicago launched a high-altitude balloon to capture a 360-degree video of the eclipse from the stratosphere. By analyzing the collected data, this study looks at the effects of partial and total solar eclipse periods on high rate GNSS scintillation data at mid-latitudes, which had not been explored in detail. This study also explores the impact of solar eclipses on signals from different satellite constellations (GPS, GLONASS, and Galileo). Throughout the eclipse, the scintillation values did not appear to have dramatic changes

TOTAL PHENOLIC CONTENT, ANTIOXIDANT AND ANTIBACTERIAL ACTIVITIES OF THE EXTRACT OF EPHEDRA PROCERA FISCH. ET MEY.

Science.gov (United States)

Dehkordi, Naser Vahed; Kachouie, Mehrdad Ataie; Pirbalouti, Abdollah Ghasemi; Malekpoor, Fatemeh; Rabei, Mohammad

2015-01-01

Ephedra prcera belonging to the family Ephedraceae is a poison and medicinal plant. The main aim of present study was to determine total phenolic content and antioxidant and antibacterial activities of ethanolic extract from the aerial parts of E. procera collected from a natural habitat in Chaharmahal va Bakhtiari province, Southwestern Iran. The total phenolic content of the extract by Folin-Ciocalteu method and the antioxidant activity using DPPH assay were determined. The antibacterial activity, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) of the extract were evaluated against five bacteria, including Proteus vulgaris, Pseudomonas aeruginosa, Enteobacter aeogenes, Bacillus ceirus and Staphylococcus aureus. Total phenolic content in the extract of E. procera was 0.718 mg tannic acid/g dry weight extract. The results indicated that the ethanolic extract of E. piocera exhibited radical scavenging activity. In addition, the results of this study confirmed that the ethanolic extract of E. procera exhibited antibacterial activity. In conclusion, the extract of E. piocera could be an important source of phenolic components with antioxidant capacity and antibacterial activity.

A study of heavy metal content and NORM in soil sample outside Lynas Malaysia Sdn. Bhd. Gebeng, Kuantan

International Nuclear Information System (INIS)

Nur Azera Izzati Mohammad

2012-01-01

Lynas Malaysia Sdn. Bhd. is established to build a processing plant of the rare earth lanthanides elements used to produce the starting material for manufacturing high-tech products analysed as cell phones, magnets, computer memory and many more. Analysis of soil samples was carried out outside the Lynas Malaysia Sdn. Bhd. The purpose of this study was to determine the contents of radionuclide activity concentration of natural elements in soil samples of 40 K, 232 Th and 238 U. A total of five heavy metals As, Cd, Cr, Cu and Pb were analysed for concentrations of heavy metals in soil samples. The analysis was performed and analysed using X-ray Fluorescence Spectrometer for the composition and concentration of heavy metals and Gamma Ray Spectrometer is to determine the radionuclide activity concentration of natural elements. Results showed that the concentrations of radionuclides activities for 40 K, 232 Th and 238 U are different at all stations. 40 K radionuclide has the highest radioactivity in the Station 3, which is 385 ± 4 Bq/ kg. For 232 Th and 238 U radionuclides have a high concentration of activity at Station 2 which are 102 ± 3 Bq/ kg and 105 ± 4 Bq/ kg, respectively. According to UNSCEAR 2000 average value, the value obtained exceeds the prescribed level. For heavy metal analysis showed there were only three heavy metals which could be found, namely As, Cr and Cu. For the highest concentration of As element has found at Station 5, which is 25.5 ± 2.1 ppm. For Cr and Cu element, high concentrations has found at Station 5 and Station 1, which are 225 ± 35 ppm and 95 ± ppm, respectively. (author)

Self-Expandable Metal Stent for Closure of a Large Leak after Total Gastrectomy

Directory of Open Access Journals (Sweden)

G. Curcio

2010-08-01

Full Text Available In recent years, self-expandable metallic stents (SEMSs have emerged as a promising treatment alternative for the bridging and sealing of esophageal perforations and extensive anastomotic leaks after esophageal resection or total gastrectomy. A 56-year-old woman underwent a total gastrectomy with Roux-en-Y end-to-side esophagojejunostomy for a gastric signet ring cell carcinoma. Ten days later, esophagogastroduodenoscopy showed a 2 cm fistula in the distal end of the Roux limb of the anastomosis. This was confirmed by gastrografin esophagography. The patient was started on total parenteral nutrition. Having deemed clipping treatment for this fistula unfeasible, we decided to insert a partially silicone-coated SEMS (Evolution Controlled Release Esophageal Stent System, Cook Medical, Winston-Salem, N.C., USA. The stent was removed after ten days. Gastrografin esophagography showed no further contrast extravasation, and esophagogastroduodenoscopy showed closure of the fistula. No clinical complications were observed, and the patient was able to start normal per os nutrition. In conclusion, the treatment of symptomatic leaks in patients who have undergone esophagojejunostomy is challenging, and leakage from the jejunal stump can be a potentially serious complication. In the treatment of leakage after total gastrectomy, plastic stents (which are either too light or exercise too little radial force and totally covered metallic stents may not adhere sufficiently to the esophagojeujunal walls and, as a result, migrate beyond the anastomosis. The promising results of this report suggest that early stenting, using a partially silicone-coated SEMS, is a feasible alternative to surgical treatment in this category of patients.

HEAVY METAL CONTENT OF FLOOD SEDIMENTS AND PLANTS NEAR THE RIVER TISZA

Directory of Open Access Journals (Sweden)

SZILÁRD SZABÓ

2008-12-01

Full Text Available The River Tisza is Hungary’s especially important river. It is significant not only because of the source of energy and the value insured by water (hydraulical power, shipping route, stock of fish,aquatic environment etc. but the active floodplain between levees as well. Ploughlands, orchards, pastures, forests and oxbow lakes can be found here. They play a significant role in the life of the people living near the river and depend considerably on the quality of the sediments settled by the river. Several sources of pollution can be found in the catchment area of the River Tisza and some of them significantly contribute to the pollution of the river and its active floodplain. In this paper we study the concentration of zinc, copper, nickel and cobalt in sediments settled in the active floodplain and the ratio of these metals taken up by plants. Furthermore, our aim was to study the vertical distribution of these elements by the examination of soil profiles. The metal content of the studiedarea does not exceed the critical contamination level, except in the case of nickel, and the ratio of metals taken up by plants does not endanger the living organisms. The vertical distribution of metals in the soil is heterogeneous, depending on the ratio of pollution coming from abroad and the quality of flood.

Evaluation of the isoflavone and total phenolic contents of kefir-fermented soymilk storage and after the in vitro digestive system simulation.

Science.gov (United States)

da Silva Fernandes, Meg; Sanches Lima, Fernando; Rodrigues, Daniele; Handa, Cintia; Guelfi, Marcela; Garcia, Sandra; Ida, Elza Iouko

2017-08-15

This study aimed to evaluate the isoflavone and total phenolic contents in kefir-fermented soymilk storage and after the in vitro digestive system simulation (DSS). Soymilk was fermented with kefir culture (0.02UC/L) at 25°C for 15h and stored at 4°C for 4days. After the fermentation and storage, the isoflavone and total phenolic contents were quantified by high performance liquid chromatography and spectrophotometry, respectively. The cell viability of lactic acid bacteria and yeast was evaluated. Fermentation promoted an increase of approximately 3log CFU/g cycles of the microorganisms and the storage process did not alter the aglycone isoflavones and total phenolic contents. The content of aglycone isoflavones increased 2-fold, and the total phenolic content increased 9-fold. Therefore, kefir-fermented soymilk is a good source of aglycone isoflavones and phenolics, since the content of these substances was increased significantly after the in vitro digestive system simulation of the product. Copyright © 2017 Elsevier Ltd. All rights reserved.

Metal Load of the Crops Depending on Land Use, Land Management and Soil Characteristics

Science.gov (United States)

Oeztan, Sezin; Duering, Rolf-Alexander

2010-05-01

The increase of pollutant concentrations in soil and in the food chain became very important in the past few decades. Metals of different toxicities (Cd, Zn, As, Cr, Cu, Pb, Ni, Co, V, Tl) occur in soils as a result of weathering, industrial processes, fertilization and atmospheric deposition. Some of them can be absorbed by the plants due to their mobility. The transfer of metals from soil into the plants can be explained by the physicochemical characteristics of the soil such as pH-value, organic matter and clay content. Badly adapted cultivation of the agricultural soils (declining pH-value, application of unsuitable fertilizers) can enhance the mobility of the metals and by the way increase their concentrations in agricultural products. With this study, a field experiment was established and the aim is to test the relations between available metal concentrations in the soil and metal load of the plants depending on the fertilization techniques. The plants and soil samples of the reference sites were taken, heavy metal contents of the soil samples identified by Microwave Assisted Extraction (MAE) and compared to the Aqua Regia Digestion Method for confirming the methodology. For the determination of the metal content in plants, MAE was executed to the selected plant samples and for that procedure, the samples were digested with HNO3 and H2O2 in the microwave oven. Quantation of the metals in soil and in plants was done by ICP-OES Methodology. The evaluation of the first results confirmed that the metal content of the soil is strongly dependent on the properties of different fertilization variants (N,P,K) used and physicochemical characteristics of the soils. According to the fertilization variants, total metal contents of the soil are increased in the soil samples which have high amounts of N, P, K fertilization. Soils which were enforced with high P fertilization degrees had significantly higher total Cd content. Results on the Cd content of the plant samples

JUICE EXTRACTION FOR TOTAL SOLUBLE SOLIDS CONTENT DETERMINATION IN MELON

Directory of Open Access Journals (Sweden)

Paulo Sérgio Lima e Silva

2006-01-01

Full Text Available The total soluble solids content (TSSC shows high positive correlation with sugars content, and therefore is generally accepted as an important quality trait of fruits. In melon, this evaluation is usually done by grinding a slice of the fruit's pulp in a household food processor, straining the ground material and then proceeding the TSSC determination in the resulting juice. This evaluation is labor-intensive and takes a long time to complete. An alternative process was delineated for obtaining the juice: the pulp of the fruit slice would be transversally cut one or more times, and longitudinally pressed by hand to obtain the juice. The objective of this work was to compare processes for obtaining juice to evaluate TSSC in melons. Fifty, 15, and 15 fruits of the Galia, Yellow, and Cantaloupe type melons were evaluated, respectively. Each fruit was considered as a block, and was longitudinally split into six fractions with similar sizes, which corresponded to the plots. The following treatments were evaluated: fraction without cuts, fractions with one, three, five, or seven transversal cuts, and the fraction treated by the conventional process. It was concluded that the procedure by which the melon slices of Galia, Yellow and Cantaloupe types are pressed for obtaining the juice to evaluate TSSC can overestimate this content. This would probably be due to the fact that the most internal section of the mesocarp presents greater TSSC than the portions closer to the epicarp.

Some metals in aboveground biomass of Scots pine in Lithuania

DEFF Research Database (Denmark)

Varnagiryte-Kabašinskiene, Iveta; Armolaitis, Kestutis; Stupak, Inge

2014-01-01

with stemwood and living branches. However, metal export with aboveground biomass represented relatively small proportion of metals in mineral sandy soil. The annual inputs of Fe and Zn with atmospheric deposition were over 10 times higher than the mean annual removals with total aboveground biomass....... The content of metals in forest biomass fuel ash was relatively small to compare with their total removals. The findings of this study have an important implications for future practice, i.e. the recommended maximum forest biomass fuel ash dose for the compensating fertilising could be increased with respect...... to balanced output - input in Lithuania....

Evaluation and comparison of the content of total polyphenols and antioxidant activity of selected species of the genus Allium

Directory of Open Access Journals (Sweden)

Marianna LENKOVÁ

2016-12-01

Full Text Available The species of the genus Allium are very important crops for human health. They contain many health beneficial substances, such as polyphenols (especially flavonoids, sulphur compounds, vitamins, mineral substances and substances with antioxidant activity. This work has focused on the comparison of total phenolic content and antioxidant activity of selected species of the genus Allium – garlic (Allium sativum L., chives (Allium schoenoprasum L., ramson (Allium ursinum L. and red, yellow and white onion (Allium cepa L.. Samples of plant material were collected at the stage of full maturity in the area of Nitra. Total polyphenols content was determined using the spectrophotometric method of Folin-Ciocalteu agents. Determined the content of total polyphenols were in the range 444.3 - 1591 mg*kg-1. Total polyphenols content in the observed crops declined in the following order: chives > red onion > garlic > yellow onion > ramson > white onion. Antioxidant activity was measured by the spectrophotometric method using a compound DPPH (2.2-diphenyl-1-picryhydrazyl. Determined the value of antioxidant activity ranged 12.29 – 76.57%. Antioxidant activity observed in crops declined in the following order: chives > ramson > red onion > yellow onion > garlic > white onion. In all the analysed crop plants was confirmed by the strong dependence of the antioxidant activity and the total content of polyphenolic substances.

Total mercury and methyl-mercury contents and accumulation in polar microbial mats.

Science.gov (United States)

Camacho, Antonio; Rochera, Carlos; Hennebelle, Raphaëlle; Ferrari, Christophe; Quesada, Antonio

2015-03-15

Although polar regions are considered isolated and pristine areas, the organisms that inhabit these zones are exposed to global pollution. Heavy metals, such as mercury, are global pollutants and can reach almost any location on Earth. Mercury may come from natural, volcanic or geological sources, or result from anthropogenic sources, in particular industrial or mining activities. In this study, we have investigated one of the most prominent biological non-marine communities in both polar regions, microbial mats, in terms of their Hg and methyl-mercury (MeHg) concentrations and accumulation capacities. The main hypotheses posed argued on the importance of different factors, and to test them, we have measured Hg concentrations in microbial mats that were collected from 6 locations in different ecological situations. For this purpose, the direct anthropogenic impacts, volcanic influences, proximity to the seashore, latitudinal gradients and C contents were investigated. Our results show that, other than the direct anthropogenic influence, none of the other hypotheses alone satisfactorily explains the Hg content in microbial mats. In contrast, the MeHg contents were noticeably different between the investigated locations, with a higher proportion of MeHg on the McMurdo Ice Shelf (Antarctica) and a lower proportion on Ward Hunt Island (High Arctic). Furthermore, our results from in situ experiments indicated that the microbial mats from South Shetland Islands could quickly accumulate (48 h) Hg when Hg dissolved salts were supplied. Over short-term periods, these mats do not transform Hg into MeHg under field conditions. Copyright © 2014 Elsevier B.V. All rights reserved.

Coagulation / flocculation process in the removal of trace metals ...

African Journals Online (AJOL)

Attempts were made in this study to examine the effectiveness of polymer addition to coagulation process during treatment of a beverage industrial wastewater to remove some of its trace metals content such as lead, cadmium, total iron, total chromium, nickel and zinc. Experiments were conducted using the standard Jar ...

Fermentation and complex enzyme hydrolysis for improving the total soluble phenolic contents, flavonoid aglycones contents and bio-activities of guava leaves tea.

Science.gov (United States)

Wang, Lu; Luo, You; Wu, Yanan; Liu, Yan; Wu, Zhenqiang

2018-10-30

There are both soluble and insoluble-bound forms of phenolics in tea-leaf products. In order to increase total soluble phenolics contents, guava leaves tea (GLT) was first fermented with Monascus anka and Saccharomyces cerevisiae, and then hydrolyzed with complex enzymes. The changes in phenolics profiles, antioxidant activities and inhibitory effect on α-glucosidase in processed GLT were investigated. Compared with the un-fermented GLT, fermentation and complex enzymatic processing (FE) significantly increased the total phenolics, total flavonoids, quercetin and kaempferol contents by 2.1, 2.0, 13.0 and 6.8 times, respectively. After the FE, a major proportion of phenolics existed in the soluble form. Quercetin was released in the highest amount among different phenolics. In addition, soluble phenolic extracts from GLT following FE exhibited a highest antioxidant activity and inhibitory effect on α-glucosidase. The paper suggested an improved method for processing GLT into high-value products rich in phenolics and flavonoids aglycones with enhanced health benefits. Copyright © 2018 Elsevier Ltd. All rights reserved.

Pigments content in Сhlorella vulgaris under the influence of the sodium selenite and the ions of metals

Directory of Open Access Journals (Sweden)

O. I. Bodnar

2016-01-01

Full Text Available We investigated the content of pigments in Chlorella vulgaris Beij. (Chlorophyta under the influence of sodium selenite in concentrations based on Se4+ 0.5, 5.0, 10.0 and 20.0 mg/dm3 during one, three and seven days and under the influence of the simultaneous action of selenite in concentrations 10 mg Se4+/dm3 and ions of Zn2+, Mn2+, Co2+,Cu2+, Fe3+ in concentrations 5.00, 0.25, 0.05, 0.008 and 0.002 mg/dm3over seven days. This research was carried out to establish the conditions for obtaining algal lipidis substance enriched with selenium and biogenic metals in the aquaculture. The content of pigments was determined spectrophotometrically, the cellular walls were separatedby centrifuge in the percoll gradient and investigated microscopically. The pigments content in the Ch. vulgaris increased by 1.5–2.5 times in comparison with the control sample under the influence of 10 mg Se4+/dm3 with and without metal ions, in all variants of experimental influence due to binding of SeО32– with proteins and lipids. We found that selenium was included in all lipid fractions (triacylglycerols, dyacylglycerols, phospholipids, nonetherified fatty acids; the maximum amount of selenium-containing lipids wasrecorded in chloroplasts. The increase in the contents of carotenoids caused by the actions of experimental factors played an exceptional role in the mechanism of antioxidant protection that prevents destruction of chlorophyll and, accordingly, increases its amount in cells. Changes in the functioning of the photosynthetic apparatus of Ch. vulgaris affect the whole complex of metabolic transformation. Thus, the successful cultivation of chlorella, enriched with selenium and biogenic metals, is possible within seven days under the influence of 10 mg Se4+/dm3 and the above-mentioned concentration of metal ions.

Fruit quality, anthocyanin and total phenolic contents, and antioxidant activities of 45 blueberry cultivars grown in Suwon, Korea.

Science.gov (United States)

Kim, Jin Gook; Kim, Hong Lim; Kim, Su Jin; Park, Kyo-Sun

2013-09-01

Blueberry fruits from 45 commercial cultivars (39 northern highbush and 6 half highbush blueberry) grown in Suwon, Korea were analyzed for fruit size, soluble solids content, titratable acidity, total anthocyanin content, total phenolic content, and antioxidant activity. Fruit characteristics varied widely among the 45 blueberry cultivars. Fruit weight ranged from 0.9 to 3.6 g, soluble solids content from 8.3 to 14.3 °Brix, and titratable acidity from 0.8% to 3.6%. Antioxidant activity ranged from 0.7 to 2.1 mg of quercetin equivalents per gram of fresh berries in different blueberry cultivars. Among the 45 blueberry cultivars, high amounts of anthocyanins and polyphenols, and high antioxidant activity were observed in 'Elliott', 'Rubel', 'Rancocas', and 'Friendship'.

Total Hydrocarbon Content (THC) Testing in Liquid Oxygen (LOX)

Science.gov (United States)

Meneghelli, B. J.; Obregon, R. E.; Ross, H. R.; Hebert, B. J.; Sass, J. P.; Dirschka, G. E.

2016-01-01

The measured Total Hydrocarbon Content (THC) levels in liquid oxygen (LOX) systems at Stennis Space Center (SSC) have shown wide variations. Examples of these variations include the following: 1) differences between vendor-supplied THC values and those obtained using standard SSC analysis procedures; and 2) increasing THC values over time at an active SSC test stand in both storage and run vessels. A detailed analysis of LOX sampling techniques, analytical instrumentation, and sampling procedures will be presented. Additional data obtained on LOX system operations and LOX delivery trailer THC values during the past 12-24 months will also be discussed. Field test results showing THC levels and the distribution of the THC's in the test stand run tank, modified for THC analysis via dip tubes, will be presented.

Determination of fat and total protein content in milk using conventional digital imaging.

Science.gov (United States)

Kucheryavskiy, Sergey; Melenteva, Anastasiia; Bogomolov, Andrey

2014-04-01

The applicability of conventional digital imaging to quantitative determination of fat and total protein in cow's milk, based on the phenomenon of light scatter, has been proved. A new algorithm for extracting features from digital images of milk samples has been developed. The algorithm takes into account spatial distribution of light, diffusely transmitted through a sample. The proposed method has been tested on two sample sets prepared from industrial raw milk standards, with variable fat and protein content. Partial Least-Squares (PLS) regression on the features calculated from images of monochromatically illuminated milk samples resulted in models with high prediction performance when analysed the sets separately (best models with cross-validated R(2)=0.974 for protein and R(2)=0.973 for fat content). However when analysed the sets jointly with the obtained results were significantly worse (best models with cross-validated R(2)=0.890 for fat content and R(2)=0.720 for protein content). The results have been compared with previously published Vis/SW-NIR spectroscopic study of similar samples. Copyright © 2013 Elsevier B.V. All rights reserved.

Total phenolic content and antioxidant activities of pomegranate juice and whey based novel beverage fermented by kefir grains.

Science.gov (United States)

Sabokbar, Nayereh; Khodaiyan, Faramarz

2016-01-01

Mixture of pomegranate juice and whey was evaluated as a potential substrate for production of a novel beverage by kefir grains. The effects of two different variables, fermentation, temperature (19 and 25 °C) and kefir grain amount (5 %w/v and 8 %w/v), on total phenolic content (TPC) and antioxidant activities of beverage were examined during a fermentation time of 32 h. TPC and antioxidant activities including 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, reducing power, inhibition effect upon linoleic acid autoxidation and inhibition effect upon ascorbate autoxidation increased significantly (p < 0.05) during fermentation, but metal chelating effect showed no significant difference. The highest increases were observed when the temperature of 25 °C and kefir grain amount of 8 %w/v were applied. Results proved antioxidant activities of beverages were desirable and fermentation by kefir grains has the ability to enhance these antioxidant activities, as compared with unfermented beverage. Also pomegranate juice and whey were suitable media for producing a novel dairy-juice beverage.

What Are Normal Metal Ion Levels After Total Hip Arthroplasty? A Serologic Analysis of Four Bearing Surfaces.

Science.gov (United States)

Barlow, Brian T; Ortiz, Philippe A; Boles, John W; Lee, Yuo-Yu; Padgett, Douglas E; Westrich, Geoffrey H

2017-05-01

The recent experiences with adverse local tissue reactions have highlighted the need to establish what are normal serum levels of cobalt (Co), chromium (Cr), and titanium (Ti) after hip arthroplasty. Serum Co, Cr, and Ti levels were measured in 80 nonconsecutive patients with well-functioning unilateral total hip arthroplasty and compared among 4 bearing surfaces: ceramic-on-ceramic (CoC); ceramic-on-polyethylene (CoP); metal-on-polyethylene (MoP), and dual mobility (DM). The preoperative and most recent University of California, Los Angeles (UCLA) and Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores were compared among the different bearing surfaces. No significant difference was found among serum Co and Cr levels between the 4 bearing surface groups (P = .0609 and P = .1577). Secondary analysis comparing metal and ceramic femoral heads demonstrated that the metal group (MoP, modular dual mobility (Stryker Orthopedics, Mahwah, NJ) [metal]) had significant higher serum Co levels compared with the ceramic group (CoC, CoP, MDM [ceramic]) (1.05 mg/L ± 1.25 vs 0.59 mg/L ± 0.24; P = .0411). Spearman coefficient identified no correlation between metal ion levels and patient-reported outcome scores. No serum metal ion level differences were found among well-functioning total hip arthroplasty with modern bearing couples. Significantly higher serum Co levels were seen when comparing metal vs ceramic femoral heads in this study and warrants further investigation. Metal ion levels did not correlate with patient-reported outcome measures. Copyright © 2016 Elsevier Inc. All rights reserved.

Bran data of total flavonoid and total phenolic contents, oxygen radical absorbance capacity, and profiles of proanthocyanidins and whole grain physical traits of 32 red and purple rice varieties

Directory of Open Access Journals (Sweden)

Ming-Hsuan Chen

2016-09-01

Full Text Available Phytochemicals in red and purple bran rice have potential health benefit to humans. We determined the phytochemicals in brans of 32 red and purple global rice varieties. The description of the origin and physical traits of the whole grain (color, length, width, thickness and 100-kernel weight of this germplasm collection are provided along with data of total flavonoid and total phenolic contents, oxygen radical absorbance capacity and total proanthocyanidin contents. The contents and proportions of individual oligomers, from degree of polymerization of monomers to 14-mers, and polymers in bran of these 32 rice varieties are presented (DOI: http://dx.doi.org/10.1016/j.foodchem.2016.04.004 [1]. Keywords: Purple rice, Red rice, Black rice, Proanthocyanidins, Tannins, Flavonoids, Rice bran

Assessment of the characteristic of nutrients, total metals, and fecal coliform in Sibu Laut River, Sarawak, Malaysia

Science.gov (United States)

Soo, Chen-Lin; Ling, Teck-Yee; Lee, Nyanti; Apun, Kasing

2016-03-01

The concentrations of nutrients (nitrogen and phosphorus), total metals, and fecal coliform (FC) coupling with chlorophyll- a (chl- a), 5-day biochemical oxygen demand (BOD5) and other general environmental parameters were evaluated at the sub-surface and near-bottom water columns of 13 stations in the Sibu Laut River during low and high slack waters. The results indicated that inorganic nitrogen (mainly nitrate) was the primary form of nitrogen whereas organic phosphorus was the major form of phosphorus. The abundance of total heavy metals in Sibu Laut River and its tributaries was in the order of Pb < Cu < Zn < Cd. Fecal coliform concentration was relatively low along Sibu Laut River. The shrimp farm effluents contributed a substantial amount of chl- a, BOD5, nutrients, and FC to the receiving creek except for total metals. Nevertheless, the influence was merely noticeable in the intake creek and amended rapidly along Selang Sibu River and brought minimal effects on the Sibu Laut River. Besides, the domestic sewage effluents from villages nearby also contributed a substantial amount of pollutants.

Determination of total phenolic compound contents and antioxidant capacity of persimmon skin

Directory of Open Access Journals (Sweden)

M Mohamadi

2012-05-01

Full Text Available Due to the adverse side effects of synthetic antioxidants, the search for natural and safe antioxidants has become crucial. In this study, the total phenolic compound contents and antioxidants activity of persimmon skin was investigated. The extraction was carried out by means of maceration method using ethanol and methanol solvents with ratio of 1 part persimmon skin to 5 parts of solvents. Afterwards, the total phenolic compounds and antioxidants activity was measured. According to the results, ethanolic and methanolic extracts contained 255.6 and 214.15 mg gallic acid per 100 g of persimmon skin, respectively. Moreover, ethanolic extracts showed a higher activity for scavenging free radicals compared to methanolic extracts.

Airborne concentrations of metals and total dust during solid catalyst loading and unloading operations at a petroleum refinery.

Science.gov (United States)

Lewis, Ryan C; Gaffney, Shannon H; Le, Matthew H; Unice, Ken M; Paustenbach, Dennis J

2012-09-01

Workers handle catalysts extensively at petroleum refineries throughout the world each year; however, little information is available regarding the airborne concentrations and plausible exposures during this type of work. In this paper, we evaluated the airborne concentrations of 15 metals and total dust generated during solid catalyst loading and unloading operations at one of the largest petroleum refineries in the world using historical industrial hygiene samples collected between 1989 and 2006. The total dust and metals, which included aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, molybdenum, nickel, platinum, silicon, silver, vanadium, and zinc, were evaluated in relation to the handling of four different types of solid catalysts associated with three major types of catalytic processes. Consideration was given to the known components of the solid catalysts and any metals that were likely deposited onto them during use. A total of 180 analytical results were included in this analysis, representing 13 personal and 54 area samples. Of the long-term personal samples, airborne concentrations of metals ranged from refinery and perhaps other modern refineries during the timeframe examined. Copyright © 2011 Elsevier GmbH. All rights reserved.

Determining total sulfur content in coal by MSC radiometric sulfur meter

Energy Technology Data Exchange (ETDEWEB)

Czerw, B; Sikora, T; Golebiowski, W

1976-01-01

The MSC radiometric sulfur meter is used to determine total sulfur content in brown and black coals. Sulfur content is determined by measuring intensity of radiation beam which has travelled through a coal sample with the optimum constant surface mass. Construction of the MSC, consisting of a measuring head and the electronic measuring system, is shown in a scheme. AM-241 (with activity of 50 mCi) is the source of radiation. Energy of 25.3 keV (tin disc) is selected as the optimum. The SSU-70 probe with NaJ/Tl crystal is the radiation detector. The black coal sample weighs 10 g and the brown coal sample weighs 18 g. Duration of sulfur determination is 10 min. Error of sulfur determination ranges from plus or minus 0.2% to 0.3%. The results of operational tests of MSC radiometric sulfur meters in black and brown coal mines are discussed. Accuracy of measurement is shown in 5 tables. (8 refs.)

The effects of irradiated chicken manure as feed supplement on the growth and heavy metals content of common carp (cyprinus carpio L.)

International Nuclear Information System (INIS)

Haryoso; L S Andini; S Suwirma; Sinaga, R

1998-01-01

An experiment was conducted to study the use of irradiated chicken manure as feed supplement for common for carp raised in ponds. The three composition A consisted chicken manure, B consisted of shrimp waste mixed with the other materials, composition C was commercial pellet as a control. the feeding with the amount of 3% from total body weight was given to the fishes three time per day. The quality of food measured with the conversion value (amount of feed needed for 1 kg body weight gain) and the quality of water i.e. pH, temperature, and oxygen concentration were also measured. Determination of heavy metal content in fish meat and water were carried out using the atomic absorption spectrometer (AAS). Results of the experiment showed that fed of composition A (irradiated chicken manure) at 10th and 14th weeks had lowest conversion value than the fed composition B (mixed with shrimp waste) and feed of composition C (commercial pellet). The content of heavy metals in all fish meat and water were under permissible limit, except for Fe content in water before and experiment were found 5,92 and 1.92 and 1.01 ppm which higher than permissible limit for fish raised. there were no Salmonella found in the chicken manure. This means that irradiated chicken manure can be used safely as feed supplement for fish and has almost the same effect compared to the commercial feed. the water quality was found suitable for the growth of fish. (author)

Biosolids and heavy metals in soils

Directory of Open Access Journals (Sweden)

Silveira Maria Lucia Azevedo

2003-01-01

Full Text Available The application of sewage sludge or biosolids on soils has been widespread in agricultural areas. However, depending on their characteristics, they may cause increase in heavy metal concentration of treated soils. In general, domestic biosolids have lower heavy metal contents than industrial ones. Origin and treatment method of biosolids may markedly influence their characteristics. The legislation that controls the levels of heavy metal contents in biosolids and the maximum concentrations in soils is still controversial. In the long-term, heavy metal behavior after the and of biosolid application is still unknown. In soils, heavy metals may be adsorbed via specific or non-specific adsorption reactions. Iron oxides and organic matter are the most important soil constituents retaining heavy metals. The pH, CEC and the presence of competing ions also affect heavy metal adsorption and speciation in soils. In solution, heavy metals can be present either as free-ions or complexed with organic and inorganic ligands. Generally, free-ions are more relevant in environmental pollution studies since they are readily bioavailable. Some computer models can estimate heavy metal activity in solution and their ionic speciation. Thermodynamic data (thermodynamic stability constant, total metal and ligand concentrations are used by the GEOCHEM-PC program. This program allows studying heavy metal behavior in solution and the effect of changes in the conditions, such as pH and ionic strength and the application of organic and inorganic ligands caused by soil fertilization.

Antiproliferative activity in tumor cell lines, antioxidant capacity and total phenolic, flavonoid and tannin contents of Myrciaria floribunda

Directory of Open Access Journals (Sweden)

LUIS A.C. TIETBOHL

Full Text Available ABSTRACT Myrciaria floribunda (H. West ex Willd. O. Berg, Myrtaceae, is a native plant species of the Atlantic Rain Forest, from north to south of Brazil. The lyophilized ethyl acetate extract from the leaves of M. floribunda was investigated for its antiproliferative activity in tumor cell lines, antioxidant capacity and its total phenolic, flavonoid and tannin contents. Antiproliferative activity was tested in vitro against seven human cancer cells and against immortalized human skin keratinocytes line (HaCat, no cancer cell. Antioxidant activity was determined using 1-diphenyl-2-picrylhydrazyl (DPPH radical scavenging and oxygen radical absorbing capacity (ORAC assays and total phenolic, flavonoid and tannin contents were determined by spectrophotometric techniques. Ethyl acetate extract of M. floribunda exhibited antiproliferative activity against cancer cell lines with total growth inhibition (TGI between 69.70 and 172.10 µg/mL. For HaCat cell, TGI value was 213.60 µg/mL. M. floribunda showed a strong antioxidant potential: EC50 of 45.89±0.42 µg/mL and 0.55±0.05 mmol TE/g for DPPH and ORAC, respectively. Total phenolic content was 0.23±0.013g gallic acid equivalents (GAE/g extract and exhibited 13.10±1.60% of tannins content. The content of flavonoid was 24.08±0.44% expressed as rutin equivalents. These results provide a direction for further researches about the antitumoral potential of M. floribunda.

Enrichment of marsh soils with heavy metals by effect of anthropic pollution

International Nuclear Information System (INIS)

Vega, Flora A.; Covelo, Emma F.; Cerqueira, Beatriz; Andrade, Maria Luisa

2009-01-01

The impact of waste disposal on marsh soils was assessed in topsoil samples collected at eight randomly selected points in the salt marsh in Ramallosa (Pontevedra, Spain) at 4-month intervals for 2 years. Polluted soil samples were characterized in physico-chemical terms and their heavy metal contents determined by comparison with control, unpolluted samples. The results revealed a marked effect of waste discharges on the soils in the area, which have low contents in heavy metals under normal environmental conditions. In fact, the studied soils were found to contain substantial amounts of total and DTPA-extractable Cd, Cu, Pb and Zn. Based on the relationship of the redox potential with the DTPA-extractable Cd, Cu, Pb, and Zn contents of the soils, strongly reductive conditions raised the total contents in these elements by effect of their remaining in the soils as precipitated sulphides. Such contents, however, decreased as oxidative conditions gradually prevailed. The contents in DTPA-extractable metals increased with increasing Eh through the release of the metals in ionic form to the soil solution under oxidative conditions. The contents in heavy metals concentrating in the polluted soils were several times higher than those in the control soils (viz. 2 vs. 6 for Cd, 4 vs. 6 for Cu, 4 vs. 20 for Pb, and 2 vs. 15 for Zn, all in mg kg -1 ). This can be expected to influence the amounts of available heavy metals present in the soils, and hence the environmental quality of the area, in the near future. Based on its geoaccumulation index (Class ≥3 for Cd and Cu, and 1-4 for Pb and Zn), the Ramallosa marsh is highly polluted with Cd and moderately to highly polluted with Cu, Pb and Zn. The enrichment factors obtained confirm that the salt marsh is highly polluted (especially with Cd) as the primary result of anthropic activity.

Accumulation of heavy metals in Medicago sativa L. and Trifolium pratense L. at the contaminated fluvisol

Directory of Open Access Journals (Sweden)

Jakšić Snežana P.

2013-01-01

Full Text Available Recently, heavy metals concentrations increased in some agricultural areas due to the consequences of anthropogenic impacts. The aim of this study was to determine the level of heavy metals (As, Cr, Ni and Pb in Medicago sativa L. and Trifolium pratense L. grown on fluvisol, in order to obtain information on safety of these nutrients. The total content of Pb, As, Cr and Ni in the samples of fluvisol was above the maximum allowable amount. The content of heavy metals in Medicago sativa L. and Trifolium pratense L. was below the critical and toxic concentrations in all samples originating from contaminated soil. It was concluded that the accumulation of heavy metals in plants did not depend only on the total content in soil, but also the affinity of the plant, and individual and interactive effects of various soil properties. No statistically significant differences in the accumulation of heavy metals between Medicago sativa L. and Trifolium pratense L were observed. It is necessary to further control of heavy metals in the investigated area, in order to prevent their entry into the food chain and provide healthy food.

Effects of Xe Gas Content and Total Gas Pressure on the Discharge Characteristics of Colour Plasma Display Panels

International Nuclear Information System (INIS)

Hu Wenbo; Han Mengju; Liang Zhihu

2006-01-01

The effects of the Xe gas content and total gas pressure on the discharge characteristics of colour plasma display panels including the sustaining voltage margin, white-field chromaticity, discharge time lag (DTL), discharge current peak, and full-width-at-half-maximum (FWHM) of the discharge current pulse, are experimentally studied. The results indicate that as the Xe gas content in the He-Ne-Xe gas mixture or total pressure increases, the sustaining voltage margin increases, the white-field chromaticity improves, and the discharge current peak has a maximum value, while DTL and FWHM have a minimum value. The mean electron energy in the gas mixture discharge is also calculated through a numerical solution of Boltzmann equation. The experimental results are explained from a view of the mean electron energy variations with the Xe gas content and total gas pressure

A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources

International Nuclear Information System (INIS)

Oguchi, Masahiro; Murakami, Shinsuke; Sakanakura, Hirofumi; Kida, Akiko; Kameya, Takashi

2011-01-01

Highlights: → End-of-life electrical and electronic equipment (EEE) as secondary metal resources. → The content and the total amount of metals in specific equipment are both important. → We categorized 21 EEE types from contents and total amounts of various metals. → Important equipment types as secondary resources were listed for each metal kind. → Collectability and possible collection systems of various EEE types were discussed. - Abstract: End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection

Effect of artichoke (Cynara scolymus L. by-product on the quality and total phenol content of bread

Directory of Open Access Journals (Sweden)

Maroua Boubaker

2016-06-01

Full Text Available Legume flours, due to their phenol and fibre content, are ideal ingredients for improving the nutritional value of bakery products. In this study, artichoke stem powder (ASP was used to substitute 0%, 2.5%, 5%, 7.5% and 10% of wheat flour for making breads. Proximate composition of wheat flour and ASP were determined. Bread qualities and total phenols content were analyzed and compared with those of wheat bread. Results show that ASP contained 10.37% moisture, 10.28% ash, 11.53% protein, 0.86% fat, 51.29% fibre and 1350 mg EAG/100g d.m. ASP addition considerably modified the bread quality: altered appearance and texture, darker crumb and more intense odour were observed. From the sensory evaluation, tastes of bread with higher content of ASP (7.5 and 10% were the most acceptable for assessors. Total phenol contents of breads significantly increased with the addition of ASP. Therefore ASP may be considered as valuable ingredients for industrial manufacture of functional foods.

Bioaccumulation of heavy metals in the earthworms Lumbricus rubellus and Aporrectodea caliginosa in relation to total and available metal concentrations in field soils

International Nuclear Information System (INIS)

Hobbelen, P.H.F.; Koolhaas, J.E.; Gestel, C.A.M. van

2006-01-01

The aim of this study was to determine important metal pools for bioaccumulation by the earthworms Lumbricus rubellus and Aporrectodea caliginosa in soils with high binding capacity. Cd, Cu and Zn concentrations in soil, pore water and CaCl 2 extracts of soil, in leaves of the plant species Urtica dioica and in earthworms were determined at 15 field sites constituting a gradient in metal pollution. Variations in the Cu and Cd concentrations in L. rubellus and Cu concentrations in A. caliginosa were best explained by total soil concentrations, while variation in Cd concentration in A. caliginosa was best explained by pore water concentrations. Zn concentrations in L. rubellus and A. caliginosa were not significantly correlated to any determined variable. It is concluded that despite low availability, earthworms in floodplain soils contain elevated concentrations of Cu and Cd, suggesting that uptake takes place not only from the soluble metal concentrations. - Earthworms in floodplain soils not only accumulate heavy metals from soluble metal pools

Bioaccumulation of heavy metals in the earthworms Lumbricus rubellus and Aporrectodea caliginosa in relation to total and available metal concentrations in field soils

Energy Technology Data Exchange (ETDEWEB)

Hobbelen, P.H.F. [Department of Animal Ecology, Faculty of Earth and Life Sciences, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands)]. E-mail: phobbelen@usgs.gov; Koolhaas, J.E. [Department of Animal Ecology, Faculty of Earth and Life Sciences, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Gestel, C.A.M. van [Department of Animal Ecology, Faculty of Earth and Life Sciences, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands)

2006-11-15

The aim of this study was to determine important metal pools for bioaccumulation by the earthworms Lumbricus rubellus and Aporrectodea caliginosa in soils with high binding capacity. Cd, Cu and Zn concentrations in soil, pore water and CaCl{sub 2} extracts of soil, in leaves of the plant species Urtica dioica and in earthworms were determined at 15 field sites constituting a gradient in metal pollution. Variations in the Cu and Cd concentrations in L. rubellus and Cu concentrations in A. caliginosa were best explained by total soil concentrations, while variation in Cd concentration in A. caliginosa was best explained by pore water concentrations. Zn concentrations in L. rubellus and A. caliginosa were not significantly correlated to any determined variable. It is concluded that despite low availability, earthworms in floodplain soils contain elevated concentrations of Cu and Cd, suggesting that uptake takes place not only from the soluble metal concentrations. - Earthworms in floodplain soils not only accumulate heavy metals from soluble metal pools.

Evaluation and comparison of the content of total polyphenols and antioxidant activity in garlic (Allium sativum L.

Directory of Open Access Journals (Sweden)

Marianna Lenková

2017-01-01

Full Text Available Garlic (Allium sativum L. is one of the oldest cultivated plants in the world and highly valued throughout the ages as a culinary spice. It is a hardy perennial belonging to the Alliaceae family. The garlic bulb is the most commonly used portion of the plant, composed of 5 - 20 individual. It is a very good source of manganese, selenium, vitamin C and vitamin B6 (pyridoxine. In addition, garlic is a good source of other minerals, including phosphorous, calcium, potassium, iron and copper. Many of the perceived therapeutic effects of garlic are thought to be due to its active ingredient allicin. This sulphur-containing compound gives garlic its distinctive pungent smell and taste. Garlic possesses antiviral, antibacterial, anti-fungal properties allowing it to stand against all infections. This work has focused on the evaluation and comparison of total content of polyphenols and antioxidant activity in five varieties of garlic - Mojmír, Záhorský, Lukan, Havran and Makoi. Samples of plant material were collected at the stage of full maturity in the area of Nitra. The total content of polyphenols was determined using the spectrophotometric method of Folin-Ciocalteu agents. Determined the content of total polyphenols in garlic were in the range 621.13 mg.kg-1 (Záhorský to 763.28 mg.kg-1 (Havran. Total polyphenols content in garlic declined in the following order: Havran >Mojmír >Makoi >Lukan >Záhorský. Antioxidant activity was measured by the spectrophotometric method using a compound DPPH (2.2-diphenyl-1-picryhydrazyl. Statistically significant highest value of antioxidant was recorded in 20.22% (Mojmír and the lowest value was in 13.61% (Záhorský. The values of antioxidant activity observed in the varieties of garlic may be arranged as follows: Mojmír >Havran >Lukan >Makoi >Záhorský. In all the analysed varieties of garlic was confirmed by the strong dependence of the antioxidant activity and the total content of polyphenols.

Measurements of the total-body potassium contents. Application of reference value with the whole-body counter

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, Tetsuo [Chiba Univ. (Japan). Inst. for Training Radiological Technicians; Saegusa, Kenji; Arimizu, Noboru; Kuniyasu, Yoshio; Itoh, Hisao

2001-08-01

The total-body potassium contents were measured in 405 healthy volunteers and 186 patients with whole body counter in Chiba University Hospital. The total-body potassium contents was expressed by the reference value (R value). The R value was calculated as measured potassium contents (g) divided by the body surface area (m{sup 2}) and adjusted by age and sex of healthy persons. The R value was 100.65{+-}9.22% in 405 healthy volunteers. Those of each disease were as follows: liver cirrhosis; 94.24{+-}11.22%, chronic hepatitis; 95.74{+-}11.24%, hyperthyroidism; 99.37{+-}10.8%, periodic paralysis; 82.0{+-}9.01%, Barter's syndrome; 93.99{+-}9.86%, myasthenia gravis; 97.34{+-}6.42% and hypo-potassemia; 90.64{+-}11.76%, respectively. The R values of other diseases such as uterine cancer, breast cancer, anemia, hypertension were 97.78{+-}11.5%, 99.22{+-}8.88%, 96.64{+-}12.73%, 98.5{+-}9.63% respectively. Fourteen patients showed especially lower R values under 75%. These were 1 liver cirrhosis, 3 hypertension, 1 diabetes mellitus, 3 hypo-potassemia, 1 periodic paralysis, 2 Barter's syndrome, 2 chemical poisoning, and 1 breast cancer. Follow-up study was performed in some patients with the lower R values. The result of follow-up study showed that there was a relationship between improvement of symptoms and increase of total body potassium contents. (author)

Measurements of the total-body potassium contents. Application of reference value with the whole-body counter

International Nuclear Information System (INIS)

Yamamoto, Tetsuo; Saegusa, Kenji; Arimizu, Noboru; Kuniyasu, Yoshio; Itoh, Hisao

2001-01-01

The total-body potassium contents were measured in 405 healthy volunteers and 186 patients with whole body counter in Chiba University Hospital. The total-body potassium contents was expressed by the reference value (R value). The R value was calculated as measured potassium contents (g) divided by the body surface area (m 2 ) and adjusted by age and sex of healthy persons. The R value was 100.65±9.22% in 405 healthy volunteers. Those of each disease were as follows: liver cirrhosis; 94.24±11.22%, chronic hepatitis; 95.74±11.24%, hyperthyroidism; 99.37±10.8%, periodic paralysis; 82.0±9.01%, Barter's syndrome; 93.99±9.86%, myasthenia gravis; 97.34±6.42% and hypo-potassemia; 90.64±11.76%, respectively. The R values of other diseases such as uterine cancer, breast cancer, anemia, hypertension were 97.78±11.5%, 99.22±8.88%, 96.64±12.73%, 98.5±9.63% respectively. Fourteen patients showed especially lower R values under 75%. These were 1 liver cirrhosis, 3 hypertension, 1 diabetes mellitus, 3 hypo-potassemia, 1 periodic paralysis, 2 Barter's syndrome, 2 chemical poisoning, and 1 breast cancer. Follow-up study was performed in some patients with the lower R values. The result of follow-up study showed that there was a relationship between improvement of symptoms and increase of total body potassium contents. (author)

Uranium metal and uranium dioxide powder and pellets - Determination of nitrogen content - Method using ammonia-sensing electrode. 1. ed.

International Nuclear Information System (INIS)

1994-01-01

This International Standard specifies an analytical method for determining the nitrogen content in uranium metal and uranium dioxide powder and pellets. It is applicable to the determination of nitrogen, present as nitride, in uranium metal and uranium dioxide powder and pellets. The concentration range within which the method can be used is between 9 μg and 600 μg of nitrogen per gram. Interference can occur from metals which form complex ammines, but these are not normally present in significant amounts

The impact of drying techniques on phenolic compound, total phenolic content and antioxidant capacity of oat flour tarhana.

Science.gov (United States)

Değirmencioğlu, Nurcan; Gürbüz, Ozan; Herken, Emine Nur; Yıldız, Aysun Yurdunuseven

2016-03-01

In this study, the changes in phenolic composition, total phenolic content, and antioxidant capacity of tarhanas supplemented with oat flour (OF) at the levels of 20-100% (w/w) after three drying treatments (sun-, oven-, and microwave drying) were investigated. A total of seventeen phenolic standards have been screened in tarhanas, and the most abundant flavonol and phenolic acid compounds were kaempferol (23.62mg/g) and 3-hydroxy-4-metoxy cinnamic acid (9.60mg/g). The total phenolic content amount gradually increased with the addition of OF to tarhana, but decidedly higher total phenolic content was found in samples oven dried at 55°C as compared with other methods. The microwave- and oven dried tarhana samples showed higher TEACDPPH and TEACABTS values than those dried with the other methods, respectively, in higher OF amounts. Consequently, oven- and microwave-drying can be recommended to retain the highest for phenolic compounds as well as maximal antioxidant capacity in OF supplemented tarhana samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

Determination of phytochemicals, antioxidant activity and total phenolic content in Andrographis paniculata using chromatographic methods.

Science.gov (United States)

Kurzawa, Marzanna; Filipiak-Szok, Anna; Kłodzińska, Ewa; Szłyk, Edward

2015-07-15

Antioxidant activity, total phenolics content and selected phytochemicals (alkaloids and andrographolides) were determined in Andrographis paniculata and in dietary supplements containing this plant. Antioxidant activity was measured by FRAP, CUPRAC and DPPH procedures and ranged from 503.36 to 6164.09μmol TE/100g d.m. depending on methods, part of plant and kind of dietary supplement. The total phenolics (175.13-1723.79mg GAE/100g) and andrographolides content (19.44-85.13mg/g) in the studied samples were correlated with antioxidant activities determined by CUPRAC, FRAP and DPPH (r>0.95, ppaniculata leaves, whereas the lowest in dietary supplement Pn. Moreover principal component analysis, cluster analysis and one-way ANOVA follow by Duncan's tests were also performed. Copyright © 2015. Published by Elsevier B.V.

Amelioration of iron mine soils with biosolids: Effects on plant tissue metal content and earthworms.

Science.gov (United States)

Cele, Emmanuel Nkosinathi; Maboeta, Mark

2016-11-01

The achievement of environmentally sound and economically feasible disposal strategies for biosolids is a major issue in the wastewater treatment industry around the world, including Swaziland. Currently, an iron ore mine site, which is located within a wildlife sanctuary, is being considered as a suitable place where controlled disposal of biosolids may be practiced. Therefore, this study was conducted to investigate the effects of urban biosolids on iron mine soils with regard to plant metal content and ecotoxicological effects on earthworms. This was done through chemical analysis of plants grown in biosolid-amended mine soil. Earthworm behaviour, reproduction and bioaccumulation tests were also conducted on biosolid-amended mine soil. According to the results obtained, the use of biosolids led to creation of soil conditions that were generally favourable to earthworms. However, plants were found to have accumulated Zn up to 346 mg kg -1 (in shoots) and 462 mg kg -1 (in roots). This was more than double the normal Zn content of plants. It was concluded that while biosolids can be beneficial to mine soils and earthworms, they can also lead to elevated metal content in plant tissues, which might be a concern to plant-dependant wildlife species. Nonetheless, it was not possible to satisfactorily estimate risks to forage quality since animal feeding tests with hyperaccumulator plants have not been reported. Quite possibly, there may be no cause for alarm since the uptake of metals from soil is greater in plants grown in pots in the greenhouse than from the same soil in the field since pot studies fail to mimic field conditions where the soil is heterogeneous and where the root system possesses a complex topology. It was thought that further field trials might assist in arriving at more satisfactory conclusions.

Contents and retentions of free and total purine bases in lamb meat cooked by several household methods

Directory of Open Access Journals (Sweden)

P. Anfossi

2011-03-01

Full Text Available Concerns about the content of total and free purine bases in muscle foods and their retentions upon cooking have been since long established (Brulé et al., 1988. Recently, though, an important rôle has been acknowledged to dietary sources of preformed purines for the growth of tissues with a rapid turnover and for optimal function of the cellular immune response, up to the point that the positive features of these nutrients seem to outweigh by far the negative ones (ILSI, 1998. Scanty information exists about the total purine content of raw ovine meat, the only available sources of data being a survey by Herbel and Montag (1987 on purine and pyrimidine contents of protein-rich foods and the comprehensive collection of food composition tables compiled by Scherz and Senser (1994...

Determination of metals content from wines by inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Iordache, Andreea-Maria; Geana, Elisabeta-Irina

2009-01-01

Full text: Wine is a widely consumed beverage with thousands of years of tradition. Wine composition strongly determines its quality besides having a great relevance on wine characterization, tipyfication and frauds detection. Wine composition is influenced by many and diverse factors corresponding to the specific production area, such as grape variety, soil and climate, culture, yeast, winemaking practices, transport and storage. Daily consumption of wine in moderate quantities contributes significantly to the requirements of the human organism for essential elements such as Cr, Cu, Zn, Fe, Mn, Co, Ni and Sr. On the other hand, several metals, such as Pb and Cd , are known to be potentially toxic. The objective of this work was to develop a method to determine the metals content in wine samples from Romania. Three samples of difference white wines available in the supermarket was analyzed for identify the presence of: Cr, Cu, Zn, Fe, Mn, Pb, Cd, Co, Ni and Sr by inductively coupled plasma mass spectrometry (ICP-MS). (authors)

Reverse osmosis influence over the content of metals and organic acids in low alcoholic beverages

Directory of Open Access Journals (Sweden)

Andrieş Mitică Tiberiu

2017-01-01

Full Text Available Wine is defined as an alcoholic beverage resulted from fermentation of grape must, having ethanol content higher than 8.5% (v/v. Wine consumption has health benefits related to the high concentration of polyphenolic compounds with antioxidant activity and cardiovascular protection effects. However, the alcohol content restricts wine consumption, but wines with low-alcohol content can be obtained with the help of the dealcoholisation process, after it was produced through alcoholic fermentation. The purpose of this work is to evaluate the organic acid concentration, metal content and other physical-chemical parameters of low alcoholic beverages obtained from grape must by a process which involves reverse osmosis, mixing in a variable ratio the permeate and concentrate and then fermentation. For the experiments, a Muscat Ottonel grape must from Iaşi vineyard was used. There were ten variants of beverages (wines with low alcoholic concentration, by mixing known quantities of the two phases resulting from the reverse osmosis process. These beverages (wines had an alcoholic concentration starting from 2.5% (v/v in the first variant, up to 7% (v/v in the tenth variant. Alcoholic concentration varies for each variant by 0.5% (v/v. After fermentation in 50 L stainless steel tanks, the samples were filtered with 0.45μm sterile membrane and bottled in 0.75 L glass bottles. After 2 months of storage at constant temperature, the beverage samples were analyzed to determine the metal content (AAS method, organic acids concentration (HPLC method, and other physical-chemical characteristics (OIV standard methods. The results obtained indicate that the very complex physical-chemical composition of the low alcoholic beverages analyzed is influenced by the specific chemical composition of a given grape must, as well as by the use of products obtained from reverse osmosis.

MINERALS, MICROELEMENTS AND POLYPHENOLS CONTENT IN THE SOYBEAN VARIETIES GROWN IN DIFFERENT LOCALITIES OF SLOVAKIA

Directory of Open Access Journals (Sweden)

Mária Timoracká

2015-02-01

Full Text Available The aim of this study was to evaluate the influence of the grown locality on minerals and risky metal intake from the soil and on polyphenols formation in the soybean seeds. The research was realised in five localities of Slovakia using the seven soybean varieties. From the point of the soil hygiene, all determined values of heavy metals content in soils were lower than given hygienic limits, with the exception of Cd. Minerals and heavy metals contents in the soybean samples show significant differences between cultivars and localities. The values show imbalance between the potassium contents and other minerals. The order of the elements levels was determined as following: Fe > Zn > Mn > Cu > Ni > Pb > Cr ≈ Co > Cd. The risky elements contents, with exception of Cd, Cu, Pb and Ni content (only in some localities, did not exceed a limit for legumes by Food Codex SR. The total polyphenols content ranged from 817.6 to 1281.0 μg eq. tannic acid/g and suggest the variety dependence, but the locality influence was not significantly confirmed.

Blackberry wines mineral and heavy metal content determination after dry ashing: multivariate data analysis as a tool for fruit wine quality control.

Science.gov (United States)

Amidžić Klarić, Daniela; Klarić, Ilija; Mornar, Ana; Velić, Darko; Velić, Natalija

2015-08-01

This study brings out the data on the content of 21 mineral and heavy metal in 15 blackberry wines made of conventionally and organically grown blackberries. The objective of this study was to classify the blackberry wine samples based on their mineral composition and the applied cultivation method of the starting raw material by using chemometric analysis. The metal content of Croatian blackberry wine samples was determined by AAS after dry ashing. The comparison between an organic and conventional group of investigated blackberry wines showed statistically significant difference in concentrations of Si and Li, where the organic group contained higher concentrations of these compounds. According to multivariate data analysis, the model based on the original metal content data set finally included seven original variables (K, Fe, Mn, Cu, Ba, Cd and Cr) and gave a satisfactory separation of two applied cultivation methods of the starting raw material.

Biomaterial Hypersensitivity: Is It Real? Supportive Evidence and Approach Considerations for Metal Allergic Patients following Total Knee Arthroplasty

Directory of Open Access Journals (Sweden)

Andrew J. Mitchelson

2015-01-01

Full Text Available The prospect of biomaterial hypersensitivity developing in response to joint implant materials was first presented more than 30 years ago. Many studies have established probable causation between first-generation metal-on-metal hip implants and hypersensitivity reactions. In a limited patient population, implant failure may ultimately be related to metal hypersensitivity. The examination of hypersensitivity reactions in current-generation metal-on-metal knee implants is comparatively limited. The purpose of this study is to summarize all available literature regarding biomaterial hypersensitivity after total knee arthroplasty, elucidate overall trends about this topic in the current literature, and provide a foundation for clinical approach considerations when biomaterial hypersensitivity is suspected.

Influence of growing conditions on heavy metals content in cultivated mushrooms

International Nuclear Information System (INIS)

Kmitene, L.

1997-01-01

The aim of the research was to investigate the influence of growing terms, microclimate conditions and growing medium on the mushroom harvest and quality. Champignons were grown according to the Polish technology. Pleurotus ostreatus was grown in perforate sacks using chopped wheat straw. Mycelium was sowed in different terms. It was established that the harvest of mushrooms, especially their quality, depends not only on growing conditions, but also on the kind of mushrooms, composte quality, mushroom size (diameter of cap), picking of mushrooms, storage time and other conditions. The technology of mushroom growing will be developed after studying all the factors determining the content of heavy metals and radiation in mushrooms

THE CONTENT OF HEAVY METALS IN BOTTOM SEDIMENTS OF THE WATERCOURSE IN AGRICULTURAL CATCHMENT ON THE EXAMPLE OF THE RIVER GOWIENICA

Directory of Open Access Journals (Sweden)

Kamil Szydłowski

2017-08-01

Full Text Available Bottom sediments samples for chemical analysis were derived from Gowienica river and its tributaries. Samples were taken at 2014 and 2015 years from established sampling points on differently managed and utilized adjacent areas. Total content of heavy metals, i.e.: Cd, Co, Cr, Ni, Pb and Hg were measured in collected material. The results indicate that concentrations of lead, nickel, chromium and mercury exceeded level below which no harmful impact of pollution (TEL is noted, but none of the analyzed heavy metals exceeded the limit (PEL above which harmful effects of pollution on organisms can be observed. However, according to other classification (LAW analyzed sediments were located between two classes (deposits unpolluted - Class I, and deposits unpolluted / moderately polluted (class I-II. However, chemical analysis showed the various points exceeded the natural cobalt concentration (geochemical background; 2.0 mg⋅kg-1 for aquatic sediments in Poland. The reasons of cobalt concentration exceedance in natural sediments, among others, were surface runoff from fields and meadows in the form of fertilizers, plant protection products and the domestic waste water.

HEAVY METALS (Ni, Cu, Zn AND Cd CONTENT IN SERUM OF RAT FED GREEN MUSSELS

Directory of Open Access Journals (Sweden)

Muhammad Yudhistira Azis

2015-11-01

Full Text Available Green mussel (Perna viridis can playing role as bio-indicator or biomonitoring agent for heavy-metalcontaminations in the sea. In this research, the concentrations of four elements Ni, Cu, Zn and Cd in P. viridis and in the serum of rat which orally feed by P. viridis were determined by Atomic Absorption Spectrometry (AAS following dry acid digestion. Parameter analysis was evaluated by determining confidence limit for the obtained results. The result showed that there was a sequence of heavy-metal content in green mussels sample and laboratory rats serum, such as Ni < Cd < Cu < Zn. Keywords: heavy metals, green mussels, laboratory rats serum, AAS

IN VITRO ANTIOXIDANT, TOTAL PHENOLIC AND FLAVONOID CONTENTS OF SIX ALLIUM SPECIES GROWING IN EGYPT

Directory of Open Access Journals (Sweden)

Mahfouz Abdel-Gawad

2014-02-01

Full Text Available This study was designated to determine the total phenolic and flavonoid contents as well as evaluation the in vitro antioxidant activity of the defatted methanolic extracts of six Allium species growing in Egypt. Three of them are subspecies of Allium cepa L. (ssp. red onion, ssp. white onion and ssp. green onion, the other three species are Allium sativum L. (garlic, Allium porrum L. (leek and Allium kurrat L. (kurrat baladi. The results exhibited that A. cepa (ssp. red onion and A. porrum have the highest phenolic contents. On the other hand, in vitro antioxidant activity using three methods, 1, 1-diphenyl-2-picrylhydrazyl (DPPH radical, phosphomolybdate and reducing power assays revealed that A. cepa (ssp. red onion and A. porrum have high antioxidant activities. Moreover, there was positive correlation between the antioxidant activity and total phenolic contents of the tested Allium species. Therefore, the two plant species A. cepa (ssp. red onion and A. porrum were submitted to fractionation process using chloroform, ethyl acetate and n-butanol. The results showed that the ethyl acetate fractions of the two plants have high phenolic and flavonoid contents as well as have high antioxidant activities. Also, the preliminary phytochemical screening of the tested Allium species showed that A. cepa (ssp. red onion and A. porrum have high quantities of flavonoids, steroids, terpenoids and saponins.

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

Energy Technology Data Exchange (ETDEWEB)

Karahan, Aydin, E-mail: karahan@mit.edu [Center for Advanced Nuclear Energy Systems, Nuclear Science and Engineering Department, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge MA 24-204 (United States)

2011-07-15

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

Science.gov (United States)

Karahan, Aydın

2011-07-01

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

International Nuclear Information System (INIS)

Karahan, Aydin

2011-01-01

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Metal ion complex formation in small lakes of the Western Siberian Arctic zone

Science.gov (United States)

Kremleva, Tatiana; Dinu, Marina

2017-04-01

The paper is based on joint investigation of the Tyumen State University (Russia, Tyumen) and the Geochemistry and Analytical Chemistry Vernadsky Institute of Russian Academy of Sciences (Moscow, Russia) during 2012-2014 period. It presents the results of research of chemical composition of about 70 small lakes located in the area of tundra and northern taiga of West Siberia (Russia, Yamal-Nenets and Khanty-Mansi Autonomous Districts of the Tyumen region). The investigation includes determination of different parameters of natural water samples: • content of trace elements (Al, Fe, Mn, Cr, Cu, Ni, Zn, Cd, Co, Pb, etc., total more than 60 elements) by emission method with an inductively coupled plasma (ICP-MS) using mass spektrometrometre Element 2 equipment; • content of inorganic and total carbon (TIC and TC) by elemental analysis and the difference between the total and inorganic carbon gives the organic carbon content (TOC); • pH value by potentiometric method; • content of basic ions (Na+, Ca2+, K+, Mg2+, NH4+, Cl-, SO42-, NO3-, PO43-) by ion chromatography. Determination of the chemical composition of samples was conducted in the accredited laboratory according to standard procedures with regular quality control of results. Heavy metals in natural waters can exist in various forms: free (hydrated) ions bound in complexes with organic or inorganic ligands, as well as in the form of suspensions. The form of metal existence has a significant influence on their availability to transport in aquatic organisms. Metal ions associated in stable complexes with organic substances are considered less toxic. From the previous investigations state that the most stable complexes are ligands with organic ions Fe3+, Al3+. The main conclusion of the present research states that if the total content of aluminum, iron and manganese ions (meq/dm3) is equal to or greater than the concentration of dissolved organic carbon (TOC, mg/dm3) in lakes water other heavy metals will

Model evaluation of plant metal content and biomass yield for the phytoextraction of heavy metals by switchgrass.

Science.gov (United States)

Chen, Bo-Ching; Lai, Hung-Yu; Juang, Kai-Wei

2012-06-01

To better understand the ability of switchgrass (Panicum virgatum L.), a perennial grass often relegated to marginal agricultural areas with minimal inputs, to remove cadmium, chromium, and zinc by phytoextraction from contaminated sites, the relationship between plant metal content and biomass yield is expressed in different models to predict the amount of metals switchgrass can extract. These models are reliable in assessing the use of switchgrass for phytoremediation of heavy-metal-contaminated sites. In the present study, linear and exponential decay models are more suitable for presenting the relationship between plant cadmium and dry weight. The maximum extractions of cadmium using switchgrass, as predicted by the linear and exponential decay models, approached 40 and 34 μg pot(-1), respectively. The log normal model was superior in predicting the relationship between plant chromium and dry weight. The predicted maximum extraction of chromium by switchgrass was about 56 μg pot(-1). In addition, the exponential decay and log normal models were better than the linear model in predicting the relationship between plant zinc and dry weight. The maximum extractions of zinc by switchgrass, as predicted by the exponential decay and log normal models, were about 358 and 254 μg pot(-1), respectively. To meet the maximum removal of Cd, Cr, and Zn, one can adopt the optimal timing of harvest as plant Cd, Cr, and Zn approach 450 and 526 mg kg(-1), 266 mg kg(-1), and 3022 and 5000 mg kg(-1), respectively. Due to the well-known agronomic characteristics of cultivation and the high biomass production of switchgrass, it is practicable to use switchgrass for the phytoextraction of heavy metals in situ. Copyright © 2012 Elsevier Inc. All rights reserved.

Nitrogen fertilization of Cabernet Sauvignon grapevines: yield, total nitrogen content in the leaves and must composition

Directory of Open Access Journals (Sweden)

Felipe Lorensini

2015-08-01

Full Text Available Grapevines grown on sandy soils are subjected to the application of supplemental nitrogen (N; however, there is little information available regarding the impact of these applications on yield, plant nutritional state and must composition. The aim of this study was to evaluate the yield, nutritional state and must composition of grapevines subjected to N fertilization. Cabernet Sauvignon grapevines were subjected to annual applications of 0, 10, 15, 20, 40, 80 and 120 kg N ha-1 in 2008, 2009 and 2010. During the 2008/09, 2009/10 and 2010/11 harvest seasons, leaves were collected during full flowering and when the berries changed color, and the total N content was analyzed. The grape yield and the enological characteristics of the must were evaluated. The response to applied N was low, and the highest Cabernet Sauvignon grape yield was obtained in response to an application of 20 kg N ha-1 year-1. The application of N increased the nutrient content in the leaf collected at full flowering, but it had little effect on the total nutrient content in the must, and it did not affect the enological characteristics of the must, such as soluble solids, pH, total acidity, malic acid and tartaric acid.

Total and available heavy metal concentrations in soils of the Thriassio plain (Greece) and assessment of soil pollution indexes.

Science.gov (United States)

Massas, Ioannis; Kalivas, Dionisios; Ehaliotis, Constantions; Gasparatos, Dionisios

2013-08-01

The Thriassio plain is located 25 km west of Athens city, the capital of Greece. Two major towns (Elefsina and Aspropyrgos), heavy industry plants, medium to large-scale manufacturing, logistics plants, and agriculture comprise the main land uses of the studied area. The aim of the present study was to measure the total and available concentrations of Cr, Zn, Ni, Pb, Co, Mn, Ba, Cu, and Fe in the top soils of the plain, and to asses soil contamination by these metals by using the geoaccumulation index (I geo), the enrichment factor (EF), and the availability ratio (AR) as soil pollution indexes. Soil samples were collected from 90 sampling sites, and aqua regia and DTPA extractions were carried out to determine total and available metal forms, respectively. Median total Cr, Zn, Ni, Pb, Co, Mn, Ba, Cu, and Fe concentrations were 78, 155, 81, 112, 24, 321, 834, 38, and 16 × 10(3) mg kg(-1), respectively. The available fractions showed much lower values with medians of 0.4, 5.6, 1.7, 6.9, 0.8, 5.7, 19.8, 2.1, and 2.9 mg kg(-1). Though median total metal concentrations are not considered as particularly high, the I geo and the EF values indicate moderate to heavy soil enrichment. For certain metals such as Cr, Ni, Cu, and Ba, the different distribution patterns between the EFs and the ARs suggest different origin of the total and the available metal forms. The evaluation of the EF and AR data sets for the soils of the two towns further supports the argument that the EFs can well demonstrate the long-term history of soil pollution and that the ARs can adequately portray the recent history of soil pollution.

Total phenolic and flavonoid contents and biological activities of Cachrys cristata DC. extracts

Directory of Open Access Journals (Sweden)

Matejić Jelena S.

2014-01-01

Full Text Available The total phenolic/flavonoid contents and antioxidant potential of the methanol, ethyl-acetate, acetone and water extracts obtained from the aerial parts and fruits of Cachrys cristata DC.(Apiaceae were compared. The total phenolic contents of the tested extracts were determined using Folin-Ciocalteu’s reagent. The amounts per g of dry plant extract of gallic acid (GA and quercetin (Qu ranged between 22.60-166.97 mg, and 8.91-46.02 mg, respectively. The antioxidant activity, expressed as IC50, ranged from 1.784-17.621 mg/mL and from 1.01-3.42 mg L(+-ascorbic acid (Vitamin C/g when tested with 2,2-diphenyl-1-picrylhydrazyl (DPPH and ABTS, respectively. The antimicrobial activity of the extracts was investigated by the microwell dilution assay, for the most common human gastrointestinal pathogenic bacterial strains: Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 9027, Salmonella enteritidis ATCC 13076, Bacillus cereus ATCC 10876, Listeria monocytogenes ATCC15313, Staphylococcus aureus ATCC 25923 and yeast Candida albicans ATCC 10231. The results indicate that C. cristata can be regarded as a potential source of antioxidant and antimicrobial agents. [Projekat Ministarstva nauke Republike Srbije, br. 173029

Formation of a pseudotumor in total hip arthroplasty using a tribological metal-polyethylene pair

Directory of Open Access Journals (Sweden)

Lorenzo Fagotti

2015-12-01

Full Text Available ABSTRACT The aim here was to report a case of a young adult patient who evolved with tumor formation in the left thigh, 14 years after revision surgery on hip arthroplasty. Davies in 2005 made the first description of this disease in patients undergoing metal-on-metal hip arthroplasty. Over the last decade, however, pseudotumors around metal-on-polyethylene surfaces have become more prevalent. Our patient presented with increased volume of the left thigh 8 years after hip arthroplasty revision surgery. Two years before the arising of the tumor in the thigh, a nodule in the inguinal region was investigated to rule out a malignant neoplastic process, but the results were inconclusive. The main preoperative complaints were pain, functional limitation and marked reduction in the range of motion of the left hip. Plain radiographs showed loosening of acetabular and femoral, and a large mass between the muscle planes was revealed through magnetic resonance imaging of the left thigh. The surgical procedure consisted of resection of the lesion and removal of the components through lateral approach. In respect of total hip arthroplasty, pseudotumors are benign neoplasms in which the bearing surface consists of metal-on-metal, but they can also occur in different tribological pairs, as presented in this case.

Optimization of metal artefact reduction (MAR) sequences for MRI of total hip prostheses

Energy Technology Data Exchange (ETDEWEB)

Toms, A.P., E-mail: andoni.toms@nnuh.nhs.u [Department of Radiology, Norfolk and Norwich University Hospital Trust, Norwich, Norfolk NR4 7UY (United Kingdom); Smith-Bateman, C.; Malcolm, P.N.; Cahir, J. [Department of Radiology, Norfolk and Norwich University Hospital Trust, Norwich, Norfolk NR4 7UY (United Kingdom); Graves, M. [University Department of Radiology, Addenbrooke' s Hospital, Cambridge (United Kingdom)

2010-06-15

Aim: To describe the relative contribution of matrix size and bandwidth to artefact reduction in order to define optimal sequence parameters for metal artefact reduction (MAR) sequences for MRI of total hip prostheses. Methods and materials: A phantom was created using a Charnley total hip replacement. Mid-coronal T1-weighted (echo time 12 ms, repetition time 400 ms) images through the prosthesis were acquired with increasing bandwidths (150, 300, 454, 592, and 781 Hz/pixel) and increasing matrixes of 128, 256, 384, 512, 640, and 768 pixels square. Signal loss from the prosthesis and susceptibility artefact was segmented using an automated tool. Results: Over 90% of the achievable reduction in artefacts was obtained with matrixes of 256 x 256 or greater and a receiver bandwidth of approximately 400 Hz/pixel or greater. Thereafter increasing the receiver bandwidth or matrix had little impact on reducing susceptibility artefacts. Increasing the bandwidth produced a relative fall in the signal-to-noise ratio (SNR) of between 49 and 56% for a given matrix, but, in practice, the image quality was still satisfactory even with the highest bandwidth and largest matrix sizes. The acquisition time increased linearly with increasing matrix parameters. Conclusion: Over 90% of the achievable metal artefact reduction can be realized with mid-range matrices and receiver bandwidths on a clinical 1.5 T system. The loss of SNR from increasing receiver bandwidth, is preferable to long acquisition times, and therefore, should be the main tool for reducing metal artefact.

CONTENT OF SELECTED HEAVY METALS IN NI-CONTAMINATED SOIL FOLLOWING THE APPLICATION OF HALLOYSITE AND ZEOLITE

Directory of Open Access Journals (Sweden)

Maja Radziemska

2016-07-01

Full Text Available Nickel has been listed as a priory control pollutant by the United States Environmental Protection Agency (US EPA. Compared with other methods, the combination of vegetation and the addition of mineral sorbents to heavy metal-contaminated soils can be readily applied on a large scale because of the simplicity of technology and low cost. Halloysite and zeolite, among others, can be used for this purpose. A greenhouse study was performed to evaluate the feasibility of using natural zeolite, as well as raw and modified halloysite for the remediation of simulated Ni-contaminated soil. The soil was spiked with five doses of nickel, i.e. 0 (control, 80, 160, 240 and 320 mg Ni kg-1 soil. The average accumulation of heavy metals in nickel-contaminated soil was found to follow the decreasing order of Ni>Zn>Cr>Cu>Pb. The highest reduction of Pb content was observed in soil samples taken from pots containing 80 and 160 mg.kg-1 of Ni along with the addition of modified halloysite. The strongest effects were caused by natural zeolite, which significantly reduced the average content of chromium. Contamination at 320 mg Ni.kg-1 of soil led to the highest increases in the Ni, Pb and Cr contents of soil.

Comparative study of the total phenol content and antioxidant activity of some medicinal herbal extracts

Directory of Open Access Journals (Sweden)

H. Hajimehdipoor

2014-08-01

Full Text Available Herbal medicines can be used as the potential sources of anti-oxidative compounds to help the treatment of diseases associated to oxidative stress. In this paper, the Ferric Reducing Antioxidant Power (FRAP activity of four Lamiaceae herbal extracts, which traditionally applied in oxidative stress related diseases, has been evaluated and total phenolics contents of these extracts determined by using Folin-Ciocalteu reagent. The aqueous methanol extracts were prepared by percolation method and investigated for antioxidant properties and total phenolics content evaluation. All the extracts showed antioxidant effect from 123.6±4.6 mmol of FeSO4.7H2Oequivalent/100 g dried extract in Scutellaria tornefortii to 551.5±16.0 mmol of FeSO4.7H2Oequivalent/100 g dried extract in Satureja sahendica. Interestingly, although Satureja sahendica exhibited the most antioxidant activity, the highest content of polyphenolics belonged to Stachys byzantina. Taking together, antioxidant activity of the mentioned medicinal plants is not necessarily associated with polyphenolic compounds and might be partially due to the presence of other polar constituents like terpenoid-glycosides in aqueous extracts that traditionally used as decoction.

Development of a method for determination of metallic iron content within hot briquette iron (HBI for steelmaking

Directory of Open Access Journals (Sweden)

Morcali M.H.

2016-01-01

Full Text Available The growing use of metallic iron in metallurgy and industrial chemical applications requires a fast, easy and cheap method for the determination of metallic iron, not merely in recyclable materials, such as iron pellets, reduced iron mill scale dust, electric arc furnace dust and pig iron, but from hot briquette iron (HBI as well. This study investigates a new method for determination of metallic iron within HBI used for steel-making materials. The effects of reaction time, temperature, and stirring rate were studied. The concentration of iron was determined via Atomic Absorption Spectroscopy (AAS. After the optimization study, high-purity metallic iron powder (Sigma-Aldrich, PubChem Substance ID 24855469 was used to compare efficiencies and identify the optimum conditions; The present study was matched with international standard methods (BS ISO 5416:2006, IS 15774:2007. Results were consistent with certified values and metallic iron content could be determined within the 95% confidence level. The purposed method is easy, straightforward, and cheap.

Total phenolic content, antioxidant and antimicrobial activities of Blepharis edulis extracts

Directory of Open Access Journals (Sweden)

Mohaddese Mahboubi

2013-02-01

Full Text Available Blepharis edulis is traditionally used as an antiseptic, purgative, aphrodisiac and anti-inflammatory agent. The extractsof plant aerial parts were screened for total phenolic content (TPC gallic acid equivalents (GAE, total flavonoid compound(TFC quercetin equivalents (QE, antioxidant capacity and its antimicrobial activity by micro broth dilution assay. The 50%-inhibition values of BHT and 70% (v/v aqueous ethanol, 70% (v/v aqueous methanol, methanol, and water extracts of B.edulis according to the DPPH method were found to be 19.6, 71.2, 73.7, 81.4, and 218.4 g/ml, respectively. TPC ranged from38.9 to 102.7 mg GAE/g dry extracts. The antimicrobial activity showed that yeast and fungi were sensitive and resistantmicroorganisms to the extracts. The 70%-methanol extract showed more drastic antimicrobial activity than the others. Theantimicrobial activity of ethanolic extract is the same as of the methanolic extract; water extract had the weakest antimicrobialactivity.

INFLUENCE OF ILLEGAL WASTE DUMPING SITES OF NORTH-WEST PART OF BARLINEK COMMUNITY ON HEAVY METALS CONTENT IN SOILS

Directory of Open Access Journals (Sweden)

Kamil Szydłowski

2017-02-01

Full Text Available The in-depth analysis of the soil samples study included 6 from 17 catalogued illegal waste dumps localized in the Barlinek Commune (Gmina Barlinek area. The samples were taken from the middle part of each waste dump and at 5 meter distance toward north and south directions. In the collected material the pH values and concentration of lead, zinc, cadmium, cobalt, manganese, nickel, chromium, iron, copper and mercury were determined. The results of laboratory analysis were compared with current standards (Regulation of the Minister of Environment from 9th September 2002 on soil quality standards and quality standards of soil - Journal of Laws 2002 No 165, item 1359 and with the soils classification by the content of trace elements, according to Kabata-Pendias et al. The reason of diversified content of heavy metals in the collected soils samples from different waste dumps is various morphological composition of deposited waste. Nonetheless, waste landfilled on illegal dumps were not significantly influencing the levels of soil contamination with heavy metals. The concentration of Hg, Cd, Co, Cr, Cu, Mn, Ni, Pb, Zn, Fe qualifies those soils to geochemical natural levels of heavy metals content. Nevertheless, cadmium was the element, which concentration were most often (21 times exceeded.

New Approach for Fractioning Metal Compounds Studies in Soils

Science.gov (United States)

Minkina, Tatiana; Motuzova, Galina; Mandzhieva, Saglara; Bauer, Tatiana; Burachevskaya, Marina; Sushkova, Svetlana; Nevidomskaya, Dina; Kalinitchenko, Valeriy

2016-04-01

A combined approach for fractioning metal compounds in soils on the basis of sequential (Tessier, 1979) and parallel extractions (1 N NH4Ac, pH 8; 1% EDTA in NH4Ac; and 1N HCl) is proposed. Metal compounds in sequential and parallel extracts are grouped according to the strength of their bonds with soil components. A given group includes metal compounds with similar strengths of bonds and, hence, with similar migration capacities. The groups of firmly and loosely bound metal compounds can be distinguished. This approach has been used to assess the group composition of Zn, Cu, and Pb compounds in an ordinary chernozem and its changes upon the soil contamination with metals. Contamination of an ordinary chernozem from Rostov oblast with heavy metals caused a disturbance of the natural ratios between the metal compounds. In the natural soil, firmly bound metals predominate (88-95%of the total content), which is mainly caused by the fixation of metals in lattices of silicate minerals (56-83%of the total content). The mobility of the metals in the natural soil is low (5-12%) and is mainly related to metal compounds loosely bound with the soil carbonates. Upon the soil contamination with metals (application rates of 100-300 mg/kg), the content of all the metal compounds increases, but the ratio between them shifts towards a higher portion of the potentially mobile metal compounds (up to 30-40% of the bulk contents of the metals). Organic substances and non-silicate Fe, Al, and Mn minerals become the main carriers of the firmly and loosely bound metals. The strengths of their bonds with Cu, Pb, and Zn differ. Lead in the studied chernozems is mainly fixed in a loosely bound form with organic matter, whereas copper and zinc are fixed both by the organic matter and by the non-silicate Fe, Al, and Mn compounds. Firm fixation of the applied Cu and Pb is mainly ensured by the soil organic matter and non-silicate minerals, whereas firm fixation of Zn is mainly due to non

Considering bioavailability in the remediation of heavy metal contaminated sites

Directory of Open Access Journals (Sweden)

Leita L.

2013-04-01

Full Text Available Many years of research have demonstrated that instead of the total concentration of metals in soil, bioavailability is the key to understand the environmental risk derived by metals, since adverse effects are related only to the biologically available forms of these elements. The knowledge of bioavailability can decrease the uncertainties in evaluating exposure in human and ecological risk assessment. At the same time, the efficiency of remediation treatments could be greatly influenced by availability of the contaminants. Consideration of the bioavailability processes at contaminated sites could be useful in site-specific risk assessment: the fraction of mobile metals, instead of total content should be provided as estimates of metal exposure. Moreover, knowledge of the chemical forms of heavy metals in soils is a critical component in the evaluation of applicability of different remediation technologies such as phytoremdiation or soil washing.

Metal accumulation by stream bryophytes, related to chemical speciation

Energy Technology Data Exchange (ETDEWEB)

Tipping, E. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom)], E-mail: et@ceh.ac.uk; Vincent, C.D.; Lawlor, A.J.; Lofts, S. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA1 4AP (United Kingdom)

2008-12-15

Metal accumulation by aquatic bryophytes was investigated using data for headwater streams of differing chemistry. The Windermere Humic Aqueous Model (WHAM) was applied to calculate chemical speciation, including competitive proton and metal interactions with external binding sites on the plants. The speciation modelling approach gives smaller deviations between observed and predicted bryophyte contents of Cu, Zn, Cd and Pb than regressions based on total filtered metal concentrations. If all four metals, and Ni, are considered together, the WHAM predictions are superior at the 1% level. Optimised constants for bryophyte binding by the trace metals are similar to those for humic substances and simple carboxylate ligands. Bryophyte contents of Na, Mg and Ca are approximately explained by binding at external sites, while most of the K is intracellular. Oxide phases account for some of the Al, and most of the Mn, Fe and Co. - Speciation modelling can be used to interpret the accumulation of Ni, Cu, Zn, Cd and Pb by bryophytes, supporting its use to quantify trace metal bioavailability in the field.

Optimization and validation of Folin-Ciocalteu method for the determination of total polyphenol content of Pu-erh tea.

Science.gov (United States)

Musci, Marilena; Yao, Shicong

2017-12-01

Pu-erh tea is a post-fermented tea that has recently gained popularity worldwide, due to potential health benefits related to the antioxidant activity resulting from its high polyphenolic content. The Folin-Ciocalteu method is a simple, rapid, and inexpensive assay widely applied for the determination of total polyphenol content. Over the past years, it has been subjected to many modifications, often without any systematic optimization or validation. In our study, we sought to optimize the Folin-Ciocalteu method, evaluate quality parameters including linearity, precision and stability, and then apply the optimized model to determine the total polyphenol content of 57 Chinese teas, including green tea, aged and ripened Pu-erh tea. Our optimized Folin-Ciocalteu method reduced analysis time, allowed for the analysis of a large number of samples, to discriminate among the different teas, and to assess the effect of the post-fermentation process on polyphenol content.

Effect of different cooking methods on total phenolic contents and antioxidant activities of four Boletus mushrooms.

Science.gov (United States)

Sun, Liping; Bai, Xue; Zhuang, Yongliang

2014-11-01

The influences of cooking methods (steaming, pressure-cooking, microwaving, frying and boiling) on total phenolic contents and antioxidant activities of fruit body of Boletus mushrooms (B. aereus, B. badius, B. pinophilus and B. edulis) have been evaluated. The results showed that microwaving was better in retention of total phenolics than other cooking methods, while boiling significantly decreased the contents of total phenolics in samples under study. Effects of different cooking methods on phenolic acids profiles of Boletus mushrooms showed varieties with both the species of mushroom and the cooking method. Effects of cooking treatments on antioxidant activities of Boletus mushrooms were evaluated by in vitro assays of hydroxyl radical (OH·) -scavenging activity, reducing power and 1, 1-diphenyl-2-picrylhydrazyl radicals (DPPH·) -scavenging activity. Results indicated the changes of antioxidant activities of four Boletus mushrooms were different in five cooking methods. This study could provide some information to encourage food industry to recommend particular cooking methods.

Thioacetamide-induced changes in the body weight, kidney weight and the total nucleic acids content of kidney of mouse

International Nuclear Information System (INIS)

Shakoori, Abdul Rauf; Ashraf, Fauzia.

1976-01-01

Effects of thioacetamide (TAA) on the body weight, kidney weight and the total nucleic acids content of kidney of mouse were studied. TAA 1% and 2% solutions were injected intraperitoneally, twice with an interval of 24 hours in two different batches of male mice. In this way one batch received a total dose of 100 mg TAA/Kg body wt. while the other got a total dose of 200 mg TAA/Kg. Both the body as well as kidney weights decrease after TAA treatment. A total dose of 200 mg/Kg is a stronger inhibitor of growth as compared with that of 100 mg/Kg. The nucleic acids content show an increase after the drug treatment. The ribonucleic acid content of kidney increased from an average value of 4.30+0.14 mg/g kidney to 4.60+-0.22 mg/g kidney after 1% TAA treatment. The increase in 2% TAA treated mice is slightly more prominent. The deoxyribonucleic acid (DNA) content of kidney are likewise affected. After an initial increase in 1% TAA-treated animals, the DNA content gradually fall down to normal control values. Administration of 2% TAA solution causes an average increase of 21% i.e. from 1.93+-0.19 mg/g kidney wt to 2.26+-0.23 mg/g kidney wt. The size of cell, nucleus and nucleolus also increased after drug treatment, which mainly occurred during the first 24 hours of the post-treatment period

Bioavailability and bioaccumulation characterization of essential and heavy metals contents in R. acetosa, S. oleracea and U. dioica from copper polluted and referent areas.

Science.gov (United States)

Balabanova, Biljana; Stafilov, Trajče; Bačeva, Katerina

2015-01-01

Bioavailability of metals occurring in soil is the basic source of its accumulation in vegetables and herbs. The impact of soil pollution (due to urban and mining areas) on the food chain presents a challenge for many investigations. Availability of metals in a potentially polluted soil and their possible transfer and bioaccumulation in sorrel (Rumex acetosa), spinach (Spinacia oleracea) and common nettle (Urtica dioica), were examined. Microwave digestion was applied for total digestion of the plant tissues, while on the soil samples open wet digestion with a mixture of acids was applied. Three extraction methods were implemented for the bioavailable metals in the soil. Atomic emission spectrometry with inductively coupled plasma was used for determination of the total contents of 21 elements. Significant enrichments in agricultural soil for As, Pb and Zn (in urban area), Cd, Cu and Ni (in a copper mine area), compared with the respective values from European standards were detected. On the basis of three different extraction methods, higher availability was assumed for both lithogenic and anthropogenic elements. Translocation values >1 were obtained for As, Cd, Cu, Ni, Pb and Zn. Higher bioconcentrating value was obtained only for Cd, while the bioaccumulation values vary from 0.17 for Cd to 0.82 for Zn. The potential availability of hazardous metals in urban and mining soils is examined using DTPA-TEA-CaCl2 (urban) and HCl (Cu-mines areas). Our results suggested that S. oleracea and R. acetosa have a phytostabilization potential for Cd, Cu, Ni and Pb, while U. dioica only for Cu. R. acetosa has a potential for phytoextraction of Cd in urban and copper polluted areas.

Recent temporal variations of trace metal content in an Italian white wine.

Science.gov (United States)

Illuminati, Silvia; Annibaldi, Anna; Truzzi, Cristina; Scarponi, Giuseppe

2014-09-15

For the first time in Italy, the temporal variations of Cd, Pb and Cu content in an Italian white wine were studied over the period 1995-2010. A previously set up and optimized Square-Wave Anodic Stripping Voltammetric technique was used. Cd showed a first decrease (∼30%) due to the use of pesticides with progressively low Cd residues. Since 2000 Cd had constant and extremely low values (0.17±0.07 μg L(-1)). A significant decrease (∼74%) from 1995 to 2010 was observed for Pb (mean concentration, 18±10 μg L(-1)) probably due to the recent decrease in Pb emissions in the atmosphere following the phasing out of metal from gasoline (in Italy since 2002). The Cu reduction (mean value, 32±15 μg L(-1)) of ∼74% from 1995 to 2010 was related to the use of phytoiatric products with a progressively low Cu content. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effect of MoSi2 Content on Dry Sliding Tribological Properties of Zr-Based Bulk Metallic Glass Composites

Science.gov (United States)

Liu, Longfei; Yang, Jun