Prevalence and distribution of dental anomalies in orthodontic patients.

Science.gov (United States)

Montasser, Mona A; Taha, Mahasen

2012-01-01

To study the prevalence and distribution of dental anomalies in a sample of orthodontic patients. The dental casts, intraoral photographs, and lateral panoramic and cephalometric radiographs of 509 Egyptian orthodontic patients were studied. Patients were examined for dental anomalies in number, size, shape, position, and structure. The prevalence of each dental anomaly was calculated and compared between sexes. Of the total study sample, 32.6% of the patients had at least one dental anomaly other than agenesis of third molars; 32.1% of females and 33.5% of males had at least one dental anomaly other than agenesis of third molars. The most commonly detected dental anomalies were impaction (12.8%) and ectopic eruption (10.8%). The total prevalence of hypodontia (excluding third molars) and hyperdontia was 2.4% and 2.8%, respectively, with similiar distributions in females and males. Gemination and accessory roots were reported in this study; each of these anomalies was detected in 0.2% of patients. In addition to genetic and racial factors, environmental factors could have more important influence on the prevalence of dental anomalies in every population. Impaction, ectopic eruption, hyperdontia, hypodontia, and microdontia were the most common dental anomalies, while fusion and dentinogenesis imperfecta were absent.

Characterization of closed nickel-titanium orthodontic coil springs

Energy Technology Data Exchange (ETDEWEB)

Langeron, T. [Rene Descartes Univ., Paris V, Pontoise (France). Faculte de Chirurgie Dentaire; Filleul, M.P. [Rene Descartes Univ., Paris V, Pontoise (France). Faculte de Chirurgie Dentaire; ENSCP, Paris (France). Lab. de Metallurgie Structurale; Humbeeck, J. van [Katholieke Univ. Leuven, Heverlee (Belgium). Faculteit Toegepaste Wetenschappen, Metaalkunde en Toegepaste Materialkund

2001-11-01

Nickel-titanium orthodontic coil springs are used to move teeth with low forces and slow deactivation. The present paper provides data on transformation temperatures and on load-deflection rate at buccal temperature of closed Nickel-Titanium coil springs available on the market from ORMCO {sup trademark} and GAC {sup trademark}. All the springs exhibited superelasticity but their properties were not stable in the range of buccal temperatures and varied not only from one manufacturer to the other but they also varied from one batch to the other of each supplier. The need for more stability is stressed. (orig.)

American Association of Dental Schools Curricular Guidelines for Orthodontics.

Science.gov (United States)

Journal of Dental Education, 1980

1980-01-01

Guidelines reviewed and approved by the American Association of Dental Schools and sent to the Council on Dental Education in June 1979 are outlined. Educational goals and objectives and sequence of instruction (including growth and development, preclinical orthodontics, and clinical experience) are discussed. (MLW)

Perception of children and mothers regarding dental aesthetics and orthodontic treatment need: a cross-sectional study.

Science.gov (United States)

de Sousa, Emerson Tavares; da Silva, Beatriz Feitosa; Maia, Fabiana Barros Marinho; Forte, Franklin Delano Soares; Sampaio, Fábio Correia

2016-12-01

The normative orthodontic treatment need, established by dental professionals during the dental appointment, becomes ineffective when it does not evaluate all the factors that influence the decision-making process, including individuals' perception and satisfaction with their dental appearance. Therefore, the purpose of this study was to investigate the perception of children and their mothers as regards orthodontic treatment need and satisfaction with dental aesthetics and test if these variables are associated with the objective orthodontic treatment needs, assessed by the Dental Aesthetic Index (DAI). A cross-sectional study was conducted on 308 children aged 12 years, and their mothers were randomly selected by cluster sampling (primary schools). The variables "orthodontic treatment need," "satisfaction with chewing," and "dental appearance" were assessed by means of a questionnaire. The questions were answered individually at school or home, in cases of children or mothers, respectively. DAI was assessed to make an objective clinical assessment. The variables were dichotomized and statistically analyzed by the chi-square and Fisher's exact tests, contingency coefficient C, and logistic regression. The results of the clinical evaluation (DAI) were statistically associated with the perception of orthodontic treatment need and satisfaction with dental appearance in children (p ≤ 0.01). However, no association was observed with regard to satisfaction with chewing and DAI (p = 0.10). The children's perception of orthodontic treatment need and satisfaction with the appearance of their teeth was statistically associated (p ≤ 0.01) with their mothers' perception. Maxillary overjet, maxillary and mandibular misalignment, and dental crowding were associated with the orthodontic treatment need by children and their mothers, with p value -0.05 and 5 % level of significance. Maxillary overjet was a significant predictor for the perception of orthodontic

Phase transitions in coated nickel titanium arch wires: A differential ...

Indian Academy of Sciences (India)

Division of Orthodontics, Indian Army, 10 Corps Dental Unit, C/O 56 APO, ... Shape memory and super-elastic properties of orthodontic nickel titanium ... test did not show any significant difference in mean values of transition ... Low enthalpy values (0·92–3·59 j/g) compared to conventional ones, implied complete phase.

The impact of dental appearance and anxiety on self-esteem in adult orthodontic patients.

Science.gov (United States)

Romero-Maroto, M; Santos-Puerta, N; González Olmo, M J; Peñacoba-Puente, C

2015-08-01

To analyse the relationship between different dimensions of dental appearance impact and self-esteem in adult patients undergoing orthodontic treatment, with special attention to the possible mediating role of anxiety. A quasi-experimental design was used with a matched control group (without orthodontic treatment). In each group (experimental and control), there were 85 patients. The impact of dental appearance was measured using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ). State anxiety was assessed with the State Anxiety Inventory (STAI-S) and self-esteem with Rosenberg's self-esteem scale. In both groups (experimental and control), self-esteem correlates negatively, ranging between 0.26 and 0.43, with all dimensions of dental appearance impact (except for the positive dental self-confidence dimension, where all correlations were positive). Anxiety correlates positively, ranges between 0.35 and 0.44, with social impact, psychological impact and aesthetic concern, although it maintains no significant correlations with dental self-confidence. Nevertheless, in patients undergoing orthodontic treatment, anxiety plays a mediating role between dental impact dimensions and self-esteem, whilst for the control group anxiety only plays a mediator role between psychological impact and self-esteem. Anxiety plays a fundamental role in the effect of perceived dental impact on self-esteem in adult patients undergoing orthodontic treatment. These results have important practical implications for the design of bio-psycho-social intervention programs that contemplate cognitive-affective variables as an essential part of orthodontic treatment in adults. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Relationship between dental anomalies and orthodontic root resorption of upper incisors

NARCIS (Netherlands)

van Parys, K.; Aartman, I.H.A.; Kuitert, R.; Zentner, A.

2012-01-01

The aim of this study was to examine the potential relationship between the occurrence of orthodontic root resorption and presence of dental anomalies such as tooth agenesis and pipette-shaped roots. Dental anomalies and root resorption were assessed on dental panoramic tomographs (DPT) of 88

Development and evaluation of two PVD-coated β-titanium orthodontic archwires for fluoride-induced corrosion protection.

Science.gov (United States)

Krishnan, Vinod; Krishnan, Anand; Remya, R; Ravikumar, K K; Nair, S Asha; Shibli, S M A; Varma, H K; Sukumaran, K; Kumar, K Jyothindra

2011-04-01

The present research was aimed at developing surface coatings on β titanium orthodontic archwires capable of protection against fluoride-induced corrosion. Cathodic arc physical vapor deposition PVD (CA-PVD) and magnetron sputtering were utilized to deposit thin films of titanium aluminium nitride (TiAlN) and tungsten carbide/carbon (WC/C) coatings on β titanium orthodontic archwires. Uncoated and coated specimens were immersed in a high fluoride ion concentration mouth rinse, following a specially designed cycle simulating daily use. All specimens thus obtained were subjected to critical evaluation of parameters such as electrochemical corrosion behaviour, surface analysis, mechanical testing, microstructure, element release, and toxicology. The results confirm previous research that β titanium archwires undergo a degradation process when in contact with fluoride mouth rinses. The study confirmed the superior nature of the TiAlN coating, evident as many fewer changes in properties after fluoride treatment when compared with the WC/C coating. Thus, coating with TiAlN is recommended in order to reduce the corrosive effects of fluorides on β titanium orthodontic archwires. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Orthodontic treatment need among young Saudis attending public versus private dental practices in Riyadh.

Science.gov (United States)

Al-Jobair, Asma M; Baidas, Laila F; Al-Hamid, Anfal A; Al-Qahtani, Sara G; Al-Najjar, Amani T; Al-Kawari, Huda M

2016-01-01

To assess and compare the severity of malocclusion and orthodontic treatment need among young Saudis receiving free treatment at public dental practices versus those paying for treatment at private practices. This retrospective study evaluated the records of 300 patients (179 females, 121 males; age 13-21 years) treated at orthodontic clinics from 2013 through 2015. The public sample was selected from orthodontic clinics at the College of Dentistry, King Saud University (KSU); the private sample was selected from five private orthodontic clinics in Riyadh, Saudi Arabia. The records were examined for the severity of malocclusion and for orthodontic treatment need using the Dental Health Component of the Index of Orthodontic Treatment Need. The prevalence of each occlusal discrepancy and the Dental Health Component grade were recorded. The severity of malocclusion and orthodontic treatment need were compared between practice types, age groups, and sexes with the chi-square test. Displacement, increased overjet, and Class II and III malocclusion were the most common orthodontic problems in this study. Patients attending public clinics at KSU generally had more severe malocclusion than the patients attending private clinics. Seventy-seven percent of orthodontically treated patients at KSU clinics were in great need of treatment, compared with 58.5% of patients treated at private clinics ( P =0.003). Among the patients with great treatment need, approximately 62% of male patients and 70% of patients ≤16 years of age were treated at KSU clinics, compared with 38% and 48%, respectively, treated at private clinics ( P orthodontic treatment at public clinics at KSU had more severe malocclusion with greater need of orthodontic treatment than the patients paying for treatment at private clinics.

The correlation between pain perception among patients with six different orthodontic archwires and the degree of dental crowding

Directory of Open Access Journals (Sweden)

Marković Evgenija

2015-01-01

Full Text Available Introduction. Forces generated in orthodontic treatment with fixed appliances create tension and compression zones in the periodontal ligament resulting in a painful experience for patients. In the first phase of orthodontic treatment, when leveling of teeth is needed, nickel-titanium (NiTi archwires can be completely engaged in brackets, even in the cases of extreme crowding, exerting small forces. There is a great individual variation in the pain perception related to the application of orthodontic forces. Objective. The aim of this study was to investigate the pain perception among patients with dental crowding after insertion of six different NiTi orthodontic archwires as a part of fixed appliances in the first stage of orthodontic treatment. Methods. The study was conducted on a sample of 189 orthodontic patients receiving one of six different either superelastic or heat activated NiTi archwires, in the first phase of orthodontic treatment. Pain perception was evaluated in groups of patients with different degree of crowding. The modified McGill Pain Questionnaire with Visual Analogue Scale was used to evaluate the quality and intensity of pain. Statistical analysis was performed using simple descriptive statistics, and Pearson`s chi-square test with statistical significance of p<0.05. Results. Majority of patients reported pain as discomfort or pressure of moderate intensity caused by chewing or biting, started within 12 hours, carried on for 3-4 days, and decreased over time without self-medication. Conclusion. No correlation was found between pain perception among patients with different types of NiTi archwires and the degree of crowding.

Surface characterization of nickel titanium orthodontic arch wires

Science.gov (United States)

Krishnan, Manu; Seema, Saraswathy; Tiwari, Brijesh; Sharma, Himanshu S.; Londhe, Sanjay; Arora, Vimal

2015-01-01

Background Surface roughness of nickel titanium orthodontic arch wires poses several clinical challenges. Surface modification with aesthetic/metallic/non metallic materials is therefore a recent innovation, with clinical efficacy yet to be comprehensively evaluated. Methods One conventional and five types of surface modified nickel titanium arch wires were surface characterized with scanning electron microscopy, energy dispersive analysis, Raman spectroscopy, Atomic force microscopy and 3D profilometry. Root mean square roughness values were analyzed by one way analysis of variance and post hoc Duncan's multiple range tests. Results Study groups demonstrated considerable reduction in roughness values from conventional in a material specific pattern: Group I; conventional (578.56 nm) > Group V; Teflon (365.33 nm) > Group III; nitride (301.51 nm) > Group VI (i); rhodium (290.64 nm) > Group VI (ii); silver (252.22 nm) > Group IV; titanium (229.51 nm) > Group II; resin (158.60 nm). It also showed the defects with aesthetic (resin/Teflon) and nitride surfaces and smooth topography achieved with metals; titanium/silver/rhodium. Conclusions Resin, Teflon, titanium, silver, rhodium and nitrides were effective in decreasing surface roughness of nickel titanium arch wires albeit; certain flaws. Findings have clinical implications, considering their potential in lessening biofilm adhesion, reducing friction, improving corrosion resistance and preventing nickel leach and allergic reactions. PMID:26843749

Psychological well-being, dental esthetics, and psychosocial impacts in adolescent orthodontic patients: A prospective longitudinal study.

Science.gov (United States)

Deng, Xiao; Wang, Yun-Ji; Deng, Feng; Liu, Pang-Li; Wu, Yan

2018-01-01

We examined the role of adolescent orthodontic patients' psychological well-being attributes (self-esteem, general body image, and positive and negative affects) and the clinical indicators of dental esthetics (orthodontists' ratings on the Index of Orthodontic Treatment Need-Aesthetic Component [IOTN-AC]), and their changes from pretreatment to posttreatment as predictors of the psychosocial impact of dental esthetics. In this prospective longitudinal study, 1090 adolescent orthodontic patients seeking treatment at the Stomatological Hospital of Chongqing Medical University in China (mean age, 14.25 years; SD, 2.03 years) were assessed before treatment, and 68.99% (n = 752) were assessed after treatment. All subjects completed a questionnaire measuring psychological well-being attributes and 3 components of the Psychosocial Impact of Dental Aesthetics (perceptive, cognitive-affective, and social-functional). Clinical indicators of dental esthetics were measured by 3 orthodontists using the IOTN-AC. Substantial enhancement from pretreatment to posttreatment was found in all 3 Psychosocial Impacts of Dental Aesthetics components, confirming the positive effects of orthodontic treatment on oral health-related quality of life. Psychosocial impact of dental esthetics at baseline and improvement from pretreatment to posttreatment were found to be predicted by the patients' psychological well-being attributes (self-esteem, general body image, and negative affect) and the clinical indicators (orthodontists' rating on the IOTN-AC) at baseline, as well as their pretreatment to posttreatment change. Psychological well-being attributes had comparable or greater contribution to the Psychosocial Impact of Dental Aesthetics at baseline as well as greater improvement after treatment than the clinical indicators. These biopsychological models explained 29% to 43% of the variances in psychosocial impacts of dental esthetics outcome at baseline and about 33% of the variance in

Tooth replacements in young adults with severe hypodontia: Orthodontic space closure, dental implants, and tooth-supported fixed dental prostheses. A follow-up study.

Science.gov (United States)

Hvaring, Christina L; Øgaard, Bjørn; Birkeland, Kari

2016-10-01

Children with severe hypodontia have a substantial impairment of their dental health starting early in life. The purpose of this study was to describe types and locations of substitutes for missing teeth in patients with severe hypodontia and to compare the crown and soft tissue morphologies of orthodontic space closure, dental implants, and tooth-supported fixed dental prostheses for replacing teeth in the anterior region. Fifty patients missing 6 or more teeth and aged 18 years or older (mean age, 25.6 years) took part in a follow-up study. The patients were examined clinically with panoramic radiographs and clinical photographs. Crown and soft tissue variables (mucosal discoloration, crown morphology, color, and papilla index) were compared for orthodontic space closure, dental implant fixtures, and fixed dental prostheses. Dental implants, orthodontic space closure, and retaining deciduous teeth were the most commonly prescribed treatments. Persisting deciduous teeth showed a good survival rate at the follow-up examination. Mucosal discoloration was seen only for implant fixtures and was evident for almost all fixtures in the anterior mandible and two thirds of those in the anterior maxilla. The papilla index scored poorer for both implant fixtures and fixed dental prostheses compared with orthodontic space closure. Dental implants in the anterior region proved to be an inadequate treatment modality in patients with severe hypodontia because of pronounced mucosal discoloration. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics

Directory of Open Access Journals (Sweden)

Roberto Carlos Bodart Brandão

2013-10-01

Full Text Available OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics and its correlation with the periodontium (pink esthetics. Standards of normality are described both in their real dimensions (dental height and width, and in those effectively perceived by the observer, the virtual dimensions. METHODS: The best scientific evidence was sought in the literature to support the clinical procedures that must guide the professional to obtain maximum esthetic quality on their treatments. Therefore, it is necessary to investigate what the other specialties in Dentistry expect from Orthodontics and, specially, what they have to offer. Clinical cases will be used to illustrate the dental movement that might maximize treatment outcome and to confront the ideal standards with the current state of the art. CONCLUSION: Treatment quality is directly related to the amount of procedures implemented by the orthodontist, associated with concepts and resources from Periodontics and Dental Prosthesis. Microesthetics cannot be seen in isolation, but rather as the key to establish a pleasant smile (miniesthetics in addition to a harmonious face (macroesthetics and a human being with high self-esteem (hyper-esthetics.

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

Science.gov (United States)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

Nickel-titanium alloys: stress-related temperature transitional range.

Science.gov (United States)

Santoro, M; Beshers, D N

2000-12-01

The inducement of mechanical stress within nickel-titanium wires can influence the transitional temperature range of the alloy and therefore the expression of the superelastic properties. An analogous variation of the transitional temperature range may be expected during orthodontic therapy, when the archwires are engaged into the brackets. To investigate this possibility, samples of currently used orthodontic nickel-titanium wires (Sentalloy, GAC; Copper Ni-Ti superelastic at 27 degrees C, 35 degrees C, 40 degrees C, Ormco; Nitinol Heat-Activated, 3M-Unitek) were subjected to temperature cycles ranging between 4 degrees C and 60 degrees C. The wires were mounted in a plexiglass loading device designed to simulate clinical situations of minimum and severe dental crowding. Electrical resistivity was used to monitor the phase transformations. The data were analyzed with paired t tests. The results confirmed the presence of displacements of the transitional temperature ranges toward higher temperatures when stress was induced. Because nickel-titanium wires are most commonly used during the aligning stage in cases of severe dental crowding, particular attention was given to the performance of the orthodontic wires under maximum loading. An alloy with a stress-related transitional temperature range corresponding to the fluctuations of the oral temperature should express superelastic properties more consistently than others. According to our results, Copper Ni-Ti 27 degrees C and Nitinol Heat-Activated wires may be considered suitable alloys for the alignment stage.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion.

Science.gov (United States)

Peixoto, Adriano Porto; dos Santos Pinto, Ary; Garib, Daniela Gamba; Gonçalves, João Roberto

2014-01-01

This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between changes in centroid and gingival points suggested that upper and lower premolars buccaly proclined during the pre-surgical period. Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.

The Cardiff dental study: a 20-year critical evaluation of the psychological health gain from orthodontic treatment.

Science.gov (United States)

Kenealy, Pamela M; Kingdon, Anne; Richmond, Stephen; Shaw, William C

2007-02-01

Despite the widespread belief that orthodontics improves psychological well-being and self-esteem, there is little objective evidence to support this (Kenealy et al., 1989a; Shaw, O'Brien, Richmond, & Brook, 1991). A 20 year follow-up study compared the dental and psychosocial status of individuals who received, or did not receive, orthodontics as teenagers. A prospective longitudinal cohort design with four studies of the effect of orthodontic treatment. Secondary analysis of outcome data incorporated orthodontic need at baseline and treatment received in a 2 x 2 factorial design. A multidisciplinary research programme studied a cohort of 1,018, 11-12 year old participants in 1981. Extensive assessment of dental health and psychosocial well-being was conducted; facial and dental photographs and plaster casts of dentition were obtained and rated for attractiveness and pre-treatment need. No recommendations about orthodontic treatment were made, and an observational approach was adopted. At the third follow-up 337 (30-31 year olds) were re-examined in 2001. Participants with a prior need for orthodontic treatment as children who obtained treatment demonstrated better tooth alignment and satisfaction. However when self-esteem at baseline was controlled for, orthodontics had little positive impact on psychological health and quality of life in adulthood. Lack of orthodontic treatment where there was a prior need did not lead to psychological difficulties in later life. Dental status alone was a weak predictor of self-esteem at outcome explaining 8% of the variance. Self-esteem in adulthood was more strongly predicted (65% of the variance) by psychological variables at outcome: perception of quality of life, life satisfaction, self-efficacy, depression, social anxiety, emotional health, and by self-perception of attractiveness. Longitudinal analysis revealed that the observed effect of orthodontic treatment on self esteem at outcome was accounted for by self esteem at

Annual Report on Children's Health Care: Dental and Orthodontic Utilization and Expenditures for Children, 2010-2012.

Science.gov (United States)

Berdahl, Terceira; Hudson, Julie; Simpson, Lisa; McCormick, Marie C

2016-01-01

To examine general dental and orthodontic utilization and expenditures by health insurance status, public health insurance eligibility, and sociodemographic characteristics among children aged 0 to 17 years using data from 2010-2012. Nationally representative data from the Medical Expenditure Panel Survey (2010-2012) provided data on insurance status, public health insurance eligibility, and visits to dental providers for both general dental care and orthodontic care. Overall, 41.9% of US children reported an annual dental office-based visit for general (nonorthodontic) dental care. Fewer Hispanic (34.7%) and non-Latino black children (34.8%) received dental care compared to non-Hispanic whites (47.3%) and Asians (40.3%). Children living in families with the lowest income were also the least likely to have a visit (32.9%) compared to children in the highest-income families (54.7%). Among children eligible for public coverage, Medicaid-eligible children had the lowest percentage of preventive dental visits (29.2%). Socioeconomic and racial/ethnic disparities in use and expenditures for orthodontic care are much greater than those for general and preventive dental care. Average expenditures for orthodontic care were $1,823, of which 56% ($1,023) was paid out of pocket by families. Our findings provide a baseline assessment for examining trends in the future, especially as coverage patterns for children may change as the Affordable Care Act is implemented and the future of the State Child Health Insurance Program remains uncertain beyond 2017. Published by Elsevier Inc.

Dental anomalies in an orthodontic patient population with maxillary lateral incisor agenesis.

Science.gov (United States)

Citak, Mehmet; Cakici, Elif Bahar; Benkli, Yasin Atakan; Cakici, Fatih; Bektas, Bircan; Buyuk, Suleyman Kutalmış

2016-01-01

The purpose of this study was to evaluate the prevalence of dental anomalies in a subpopulation of orthodontic patients with agenesis of maxillary lateral incisors (MLI). The material of the present study included the records of the 1964 orthodontic patients. Panoramic radiographs and dental casts were used to analyze other associated eight dental anomalies, including agenesis of other teeth, dens invaginatus, dens evaginatus, peg shaped MLI, taurodontism, pulp stone, root dilaceration and maxillary canine impaction. Out of the 1964 patients examined, 90 were found to have agenesis of MLI, representing a prevalence of 4.6%. The most commonly found associated-anomalies were agenesis of other teeth (23.3%), peg-shaped MLIs (15.6%), taurodontism (42.2%), and dilacerated teeth (18.9%). Permanent tooth agenesis, taurodontism, peg-shaped maxillary lateral incisor, and root dilacerations are frequently associated with maxillary lateral incisor agenesis.

Estimation of changes in nickel and chromium content in nickel-titanium and stainless steel orthodontic wires used during orthodontic treatment: An analytical and scanning electron microscopic study

Directory of Open Access Journals (Sweden)

Vandana Kararia

2015-01-01

Full Text Available Introduction: The biocompatibility of orthodontic dental alloys has been investigated over the past 20 years, but the results have been inconclusive. The study compares standard 3 M Unitek nickel-titanium (NiTi and stainless steel archwires with locally available JJ orthodontics wires. Scanning electron microscope (SEM study of surface changes and complexometric titration to study compositional change was performed. Materials and Methods: Ten archwires each of group 1-3 M 0.016" NiTi, group 2-JJ 0.016" NiTi, group 3-3 M 0.019" FNx010.025" SS and group 4-JJ SS contributed a 10 mm piece of wire for analysis prior to insertion in the patient and 6 weeks post insertion. SEM images were recorded at Χ2000, Χ4000 and Χ6000 magnification. The same samples were subjected to complexiometric titration using ethylenediaminetetraacetic acid to gauge the actual change in the composition. Observations and Results: The SEM images of all the archwires showed marked changes with deep scratches and grooves and dark pitting corrosion areas post intraoral use. 3M wires showed an uniform criss-cross pattern in as received wires indicating a coating which was absent after intraoral use. There was a significant release of Nickel and Chromium from both group 3 and 4. Group 2 wires released ions significantly more than group 1 (P = 0.0. Conclusion: Extensive and stringent trials are required before certifying any product to be used in Orthodontics.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

Directory of Open Access Journals (Sweden)

Adriano Porto Peixoto

2014-08-01

Full Text Available INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between centroid and gingival changes suggested that upper and lower arch premolars buccaly proclined during the pre-surgical period. CONCLUSIONS: Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

OpenAIRE

Peixoto,Adriano Porto; Pinto,Ary dos Santos; Garib,Daniela Gamba; Gonçalves,João Roberto

2014-01-01

INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the m...

The influence of adding modified zirconium oxide-titanium dioxide nano-particles on mechanical properties of orthodontic adhesive: an in vitro study

OpenAIRE

Felemban, Nayef H.; Ebrahim, Mohamed I.

2017-01-01

Background The purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive. Methods ZrO2-TiO2 (Zirconium oxide, HWNANO, Hongwu International Group Ltd, China) -Titanium dioxide, Nanoshell, USA) nanopowder were incorporated into orthodontic adhesive (Transbond XT, 3?M Unitek, Monrovia, USA) with di...

In vitro biocompatibility of nickel-titanium esthetic orthodontic archwires.

Science.gov (United States)

Rongo, Roberto; Valletta, Rosa; Bucci, Rosaria; Rivieccio, Virginia; Galeotti, Angela; Michelotti, Ambrosina; D'Antò, Vincenzo

2016-09-01

To investigate the cytotoxicity of nickel-titanium (NiTi) esthetic orthodontic archwires with different surface coatings. Three fully coated, tooth-colored NiTi wires (BioCosmetic, Titanol Cosmetic, EverWhite), two ion-implanted wires (TMA Purple, Sentalloy High Aesthetic), five uncoated NiTi wires (BioStarter, BioTorque, Titanol Superelastic, Memory Wire Superelastic, and Sentalloy), one β-titanium wire (TMA), and one stainless steel wire (Stainless Steel) were considered for this study. The wire samples were placed at 37°C in airtight test tubes containing Dulbecco's Modified Eagle's Medium (0.1 mg/mL) for 1, 7, 14, and 30 days. The cell viability of human gingival fibroblasts (HGFs) cultured with this medium was assessed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Data were analyzed by a two-way analysis of variance (α  =  .05). The highest cytotoxic effect was reached on day 30 for all samples. The archwires exhibited a cytotoxicity on HGFs ranging from "none" to "slight," with the exception of the BioTorque, which resulted in moderate cytotoxicity on day 30. Significant differences were found between esthetic archwires and their uncoated pairs only for BioCosmetic (P  =  .001) and EverWhite (P < .001). Under the experimental conditions, all of the NiTi esthetic archwires resulted in slight cytotoxicity, as did the respective uncoated wires. For this reason their clinical use may be considered to have similar risks to the uncoated archwires.

Understanding the shape-memory alloys used in orthodontics.

Science.gov (United States)

Fernandes, Daniel J; Peres, Rafael V; Mendes, Alvaro M; Elias, Carlos N

2011-01-01

Nickel-titanium (NiTi) shape-memory alloys (SMAs) have been used in the manufacture of orthodontic wires due to their shape memory properties, super-elasticity, high ductility, and resistance to corrosion. SMAs have greater strength and lower modulus of elasticity when compared with stainless steel alloys. The pseudoelastic behavior of NiTi wires means that on unloading they return to their original shape by delivering light continuous forces over a wider range of deformation which is claimed to allow dental displacements. The aim of this paper is to discuss the physical, metallurgical, and mechanical properties of NiTi used in Orthodontics in order to analyze the shape memory properties, super-elasticity, and thermomechanical characteristics of SMA.

Assessment of antibacterial and cytotoxic effects of orthodontic stainless steel brackets coated with different phases of titanium oxide: An in-vitro study.

Science.gov (United States)

Baby, Roshen Daniel; Subramaniam, Siva; Arumugam, Ilakkiya; Padmanabhan, Sridevi

2017-04-01

Our objective was to assess the antibacterial and cytotoxic effects of orthodontic stainless steel brackets coated with different phases of photocatalytic titanium oxide. From a total sample of 115 brackets, 68 orthodontic stainless steel brackets were coated with titanium oxide using a radiofrequency magnetron sputtering machine. The coated brackets were then converted into 34 each of the anatase and rutile phases of titanium oxide. These brackets were subdivided into 4 groups for antibacterial study and 3 groups for cytotoxicity study. Brackets for the antibacterial study were assessed against the Streptococcus mutans species using microbiologic tests. Three groups for the cytotoxicity study were assessed using the thiazolyl tetrazolium bromide assay. The antibacterial study showed that both phases were effective, but the rutile phase of photocatalytic titanium oxide had a greater bactericidal effect than did the anatase phase. The cytotoxicity study showed that the rutile phase had a greater decrease in viability of cells compared with the anatase phase. It is recommended that orthodontic brackets be coated with the anatase phase of titanium oxide since they exhibited a significant antibacterial property and were only slightly cytotoxic. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Phase transformation changes in thermocycled nickel-titanium orthodontic wires.

Science.gov (United States)

Berzins, David W; Roberts, Howard W

2010-07-01

In the oral environment, orthodontic wires will be subject to thermal fluctuations. The purpose of this study was to investigate the effect of thermocycling on nickel-titanium (NiTi) wire phase transformations. Straight segments from single 27 and 35 degrees C copper NiTi (Ormco), Sentalloy (GAC), and Nitinol Heat Activated (3M Unitek) archwires were sectioned into 5mm segments (n=20). A control group consisted of five randomly selected non-thermocycled segments. The remaining segments were thermocycled between 5 and 55 degrees C with five randomly selected segments analyzed with differential scanning calorimetry (DSC; -100150 degrees C at 10 degrees C/min) after 1000, 5000, and 10,000 cycles. Thermal peaks were evaluated with results analyzed via ANOVA (alpha=0.05). Nitinol HA and Sentalloy did not demonstrate qualitative or quantitative phase transformation behavior differences. Significant differences were observed in some of the copper NiTi transformation temperatures, as well as the heating enthalpy with the 27 degrees C copper NiTi wires (p<0.05). Qualitatively, with increased thermocycling the extent of R-phase in the heating peaks decreased in the 35 degrees C copper NiTi, and an austenite to martensite peak shoulder developed during cooling in the 27 degrees C copper NiTi. Repeated temperature fluctuations may contribute to qualitative and quantitative phase transformation changes in some NiTi wires. Copyright 2010 Academy of Dental Materials. All rights reserved.

In Vivo Evaluation of Immediately Loaded Stainless Steel and Titanium Orthodontic Screws in a Growing Bone

OpenAIRE

Gritsch, Kerstin; Laroche, Norbert; Bonnet, Jeanne-Marie; Exbrayat, Patrick; Morgon, Laurent; Rabilloud, Muriel; Grosgogeat, Brigitte

2013-01-01

The present work intends to evaluate the use of immediate loaded orthodontic screws in a growing model, and to study the specific bone response. Thirty-two screws (half of stainless steel and half of titanium) were inserted in the alveolar bone of 8 growing pigs. The devices were immediately loaded with a 100 g orthodontic force. Two loading periods were assessed: 4 and 12 weeks. Both systems of screws were clinically assessed. Histological observations and histomorphometric analysis evaluate...

Comparison of mechanical and biological properties of zirconia and titanium alloy orthodontic micro-implants.

Science.gov (United States)

Choi, Hae Won; Park, Young Seok; Chung, Shin Hye; Jung, Min Ho; Moon, Won; Rhee, Sang Hoon

2017-07-01

The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8.0 mm) were inserted perpendicularly in solid polyurethane foam with varying densities of 20 pounds per cubic foot (pcf), 30 pcf, and 40 pcf. Primary stability was measured as maximum insertion torque (MIT) and maximum removal torque (MRT). To investigate clinical applicability, compressive and tensile forces were recorded at 0.01, 0.02, and 0.03 mm displacement of the implants at angles of 0°, 10°, 20°, 30°, and 40°. The biocompatibility of zirconia micro-implants was assessed via an experimental animal study. There were no statistically significant differences between zirconia micro-implants and titanium alloy implants with regard to MIT, MRT, or the amount of movement in the angulated lateral displacement test. As angulation increased, the mean compressive and tensile forces required to displace both types of micro-implants increased substantially at all distances. The average bone-to-implant contact ratio of prototype zirconia micro-implants was 56.88 ± 6.72%. Zirconia micro-implants showed initial stability and clinical applicability for diverse orthodontic treatments comparable to that of titanium micro-implants under compressive and tensile forces.

Antibacterial Activity of Orthodontic Cement Containing Quaternary Ammonium Polyethylenimine Nanoparticles Adjacent to Orthodontic Brackets.

Science.gov (United States)

Sharon, Eldad; Sharabi, Revital; Eden, Adi; Zabrovsky, Asher; Ben-Gal, Gilad; Sharon, Esi; Pietrokovski, Yoav; Houri-Haddad, Yael; Beyth, Nurit

2018-03-27

Enamel demineralization is a common problem found in patients using orthodontic devices, such as orthodontic braces. It was found that Streptoccocus mutans growth increases adjacent to orthodontic devices, which may result in caries development. Incorporated antibacterial quaternary ammonium polyethylenimine (QPEI) nanoparticles were previously shown to be highly efficacious against various bacteria. Combining antibacterial materials in orthodontic cement may be advantageous to prevent bacterial outgrowth adjacent to orthodontic brackets. The aim was to evaluate the efficiency of orthodontic cement containing QPEI nanoparticles in reducing S. mutans and Lactobacillus casei outgrowth adjacent to orthodontic brackets. Orthodontic brackets were bonded to the buccal surfaces of extracted lower incisors. The antibacterial effect on S. mutans and L. casei outgrowth of Neobond bracket adhesive orthodontic cement with and without QPEI nanoparticles was compared. The antibacterial effect was evaluated using crystal violet staining and bacterial count (CFU/mL). The teeth in the experimental group, with the QPEI nanoparticles cement, showed significantly lower optical density (OD) values and CFU counts of S. mutans and L. casei than the teeth in the control group ( p brackets.

Spectrophotometric evaluation of dental bleaching under orthodontic bracket in enamel and dentin

Science.gov (United States)

Correr, Americo-Bortolazzo; Rastelli, Alessandra-Nara-Souza; Lima, Débora-Alves-Nunes-Leite; Consani, Rafael-Leonardo-Xediek

2014-01-01

Aware of the diffusion capacity of bleaching in the dental tissues, many orthodontists are subjecting their patients to dental bleaching during orthodontic treatment for esthetic purposes or to anticipate the exchange of esthetic restorations after the orthodontic treatment. For this purpose specific products have been developed in pre-loaded whitening trays designed to fit over and around brackets and wires, with clinical efficacy proven. Objective: The objective of this study was to evaluate, through spectrophotometric reflectance, the effectiveness of dental bleaching under orthodontic bracket. Material and Methods: Thirty-two bovine incisors crown blocks of 8 mm x 8 mm height lengths were used. Staining of tooth blocks with black tea was performed for six days. They were distributed randomly into 4 groups (1-home bleaching with bracket, 2- home bleaching without bracket, 3- office bleaching with bracket, 4 office bleaching without bracket). The color evaluation was performed (CIE L * a * b *) using color reflectance spectrophotometer. Metal brackets were bonded in groups 1 and 3. The groups 1 and 2 samples were subjected to the carbamide peroxide at 15%, 4 hours daily for 21 days. Groups 3 and 4 were subjected to 3 in-office bleaching treatment sessions, hydrogen peroxide 38%. After removal of the brackets, the second color evaluation was performed in tooth block, difference between the area under the bracket and around it, and after 7 days to verified color stability. Data analysis was performed using the paired t-test and two-way variance analysis and Tukey’s. Results: The home bleaching technique proved to be more effective compared to the office bleaching. There was a significant difference between the margin and center color values of the specimens that were subjected to bracket bonding. Conclusions: The bracket bond presence affected the effectiveness of both the home and office bleaching treatments. Key words:Tooth bleaching, spectrophotometry

[The microbiological aspects of orthodontic treatment of children with dental maxillary anomalies].

Science.gov (United States)

Chesnokov, V A; Chesnokova, M G; Leontiev, V K; Mironov, A Yu; Lomiashvili, L M; Kriga, A S

2015-03-01

The issues of pre-nosologic diagnostic and effectiveness of treatment of diseases of oral cavity is an actual issue in dentistry. The long- duration orthodontic treatment of patients with dentoalveolar anomalies using non-removable devices is followed by such negative consequences as development demineralization of enamel and caries registered during treatment and after remove ofdevices. The level of quantitative content of oral streptococci was analyzed and dental status in children with dentoalveolar anomalies was evaluated during treatment with non-removable devices was evaluated. The caries and inflammation of periodontium of oral cavity were most often detected in children with high level of content of streptococci. In different periods of study the firm tendency of increasing of concentration of Streptococcus mutans and S. sanguis of dental plaque of oral cavity is established. The established index indicators of dental status of patients testify intensity of caries damage, level of poor hygiene of oral cavity, development of average degree of severity of inflammation process of periodontium. The obtained results substantiate involvement ofstreptococci, associates of microbiota of dental plaque of oral cavity in children, in process of development of caries. The characteristics of micro-ecology of dental plaque to evaluate cariesgenic situation that can be used as a basis for constructing diagnostic algorithm under monitoring of patients with dentoalveolar anomalies with purpose of forthcoming planning and implementation of effective orthodontic treatment.

Maxillary hypoplasia in the cleft patient: contribution of orthodontic dental space closure to orthognathic surgery.

Science.gov (United States)

Lee, Justine C; Slack, Ginger C; Walker, Ryann; Graves, Lindsay; Yen, Sandra; Woo, Jessica; Ambaram, Rishal; Martz, Martin G; Kawamoto, Henry K; Bradley, James P

2014-02-01

Cleft lip and palate surgery in the developing child is known to be associated with maxillary hypoplasia. However, the effects of nonsurgical manipulations on maxillary growth have not been well investigated. The authors present the contribution of orthodontic dental space closure with canine substitution to maxillary hypoplasia and the need for orthognathic surgery. Cleft lip/palate and cleft palate patients older than 15 years of age were reviewed for dental anomalies, orthodontic canine substitution, and Le Fort I advancement. Skeletal relationships of the maxilla to the skull base (SNA), mandible (ANB), and facial height were determined on lateral cephalograms. Logistic regression analyses were performed to estimate odds ratios. Ninety-five patients were reviewed (mean age, 18.1 years). In 65 patients with congenitally missing teeth, 55 percent with patent dental spaces required Le Fort I advancement. In contrast, 89 percent who underwent canine substitution required Le Fort I advancement (p = 0.004). Canine substitution is associated with a statistically significant increase in maxillary retrognathia when compared with dental space preservation on lateral cephalograms (mean SNA, 75.2 and 79.0, respectively; p = 0.006). Adjusting for missing dentition, logistic regression analyses demonstrated that canine substitution is an independent predictor for orthognathic surgery (OR, 6.47) and maxillary retrusion defined by SNA orthodontic cleft closure using canine substitution with maxillary hypoplasia and subsequent Le Fort I advancement, and suggest systematic criteria for management of cleft-related dental agenesis. Therapeutic, III.

Expressed needs associated with orthodontic treatment in a private dental college, Mathura

Directory of Open Access Journals (Sweden)

Gaurav Agarwal

2015-01-01

Full Text Available Introduction: The primary goal for most of the patients who seek orthodontic treatment is a discernible improvement in some aspect of their dento-facial appearance. Orthodontic therapy makes people look better and feel better about themselves and perhaps influences their ability for social interaction. Hence, this study was conducted to assess expressed needs and barriers associated with orthodontic treatment. Objectives: To know main motivational factor behind seeking orthodontic treatment and to correlate these factors with other variables such as age, gender, and socioeconomic status. Materials and Methods: The study included 200 orthodontic patients between 12 and 25 years visiting a private dental college, Mathura during July 2014 to September 2014. Structured proforma consisting of closed ended questions was used for assessing social demographic characteristics, factors and the barriers, which were associated with orthodontic treatment. Statistical analysis was performed using SPSS version 22. Results: This study comprised of 120 females. Self-confidence (48% was the main motivating for undergoing treatment among the subjects. Social interaction (44% was the most common area of improvement expected by the patients after orthodontic treatment. Financial constraints were the main barrier for seeking treatment found among 30% patients. Conclusion: Patients seek orthodontic treatment mainly to enhance facial esthetics, self-confidence and social acceptability. The mismatch of need and desire for treatment is a problem for orthodontists.

Magnetic fields from electric toothbrushes promote corrosion in orthodontic stainless steel appliances but not in titanium appliances.

Science.gov (United States)

Kameda, Takashi; Ohkuma, Kazuo; Oda, Hirotake; Sano, Natsuki; Batbayar, Nomintsetseg; Terashima, Yukari; Sato, Soh; Terada, Kazuto

2013-01-01

Electric toothbrushes are widely used, and their electric motors have been reported to produce low-frequency electromagnetic fields that induced electric currents in metallic objects worn by the users. In this study, we showed that electric toothbrushes generated low-frequency magnetic fields (MFs) and induced electric currents in orthodontic appliances in artificial saliva (AS), which accelerated corrosion in stainless steel (SUS) appliances, but not in titanium (Ti) appliances; the corrosion was evaluated by using an inductively coupled plasma-optical emission spectrometer and a three-dimensional laser confocal microscope. The pH of AS used for appliance immersion did not change during or after MF exposure. These results suggested that MF-induced currents from electric toothbrushes could erode SUS appliances, but not Ti appliances, because of their high corrosion potentials. Further studies are required to clarify the mechanisms of metallic corrosion by induced currents in dental fields, which may trigger metal allergies in patients.

Orthodontic evolution: an update for the general dental practitioner. Part 1: recent advances, treatment need and demand, and benefits of treatment.

Science.gov (United States)

McGuinness, Niall J P

2008-01-01

Like all specialties of dentistry, orthodontics has undergone considerable development and improvement in treatment techniques over the past four decades. The two articles in this series aim to inform the general dental practitioner about these developments, together with an update on orthodontics' relationship to dental health, TMJ dysfunction and other aspects.

Effect of titanium dioxide nanoparticle addition into orthodontic adhesive resin on enamel microhardness

Science.gov (United States)

Andriani, A.; Krisnawati; Purwanegara, M. K.

2017-08-01

White spots are an early sign of enamel demineralization, which may lead to development of dental caries. Enamel demineralization can be determined by examining the microhardness number of the enamel. Addition of antibacterial agents such as TiO2 nanoparticles into the orthodontic adhesive (TiO2 nanocomposite) is expected to prevent enamel demineralization. The objective of this study is to evaluate the effect of TiO2 nanocomposites in maintaining enamel microhardness around orthodontic brackets. The bracket was bonded to the premolar using Transbond XT (group 1), 1% TiO2 nanocomposites (group 2), and 2% TiO2 nanocomposites (group 3). Group 4 was the control group, and it was not given any treatment prior to the microhardness test. The samples of groups 1, 2, and 3 were soaked in BHI solution containing Streptococcus mutans, and then stored in an incubator at 37°C for 30 days. Demineralizations were determined on cross-sectioned tooth 100μm and 200μm cervical to the bracket by the Vickers microhardness test. The microhardness values were significantly different between every group, with the highest value obtained for control group, followed by the 2% TiO2 nanocomposite group, 1% TiO2 nanocomposite group, and then the Transbond XT group. The results of this study reveal that 2% TiO2 nanocomposites have the ability to maintain enamel microhardness around the orthodontic bracket.

Comparison of stainless steel and titanium alloy orthodontic miniscrew implants: a mechanical and histologic analysis.

Science.gov (United States)

Brown, Ryan N; Sexton, Brent E; Gabriel Chu, Tien-Min; Katona, Thomas R; Stewart, Kelton T; Kyung, Hee-Moon; Liu, Sean Shih-Yao

2014-04-01

The detailed mechanical and histologic properties of stainless steel miniscrew implants used for temporary orthodontic anchorage have not been assessed. Thus, the purpose of this study was to compare them with identically sized titanium alloy miniscrew implants. Forty-eight stainless steel and 48 titanium alloy miniscrew implants were inserted into the tibias of 12 rabbits. Insertion torque and primary stability were recorded. One hundred grams of tensile force was applied between half of the implants in each group, resulting in 4 subgroups of 24 specimens each. Fluorochrome labeling was administered at weeks 4 and 5. When the rabbits were euthanized at 6 weeks, stability and removal torque were measured in half (ie, 12 specimens) of each of the 4 subgroups. Microdamage burden and bone-to-implant contact ratio were quantified in the other 12 specimens in each subgroup. Mixed model analysis of variance was used for statistical analysis. All implants were stable at insertion and after 6 weeks. The only significant difference was the higher (9%) insertion torque for stainless steel. No significant differences were found between stainless steel and titanium alloy miniscrew implants in microdamage burden and bone-to-implant contact regardless of loading status. Stainless steel and titanium alloy miniscrew implants provide the same mechanical stability and similar histologic responses, suggesting that both are suitable for immediate orthodontic clinical loads. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Titanium dioxide in dental enamel as a trace element and its variation with bleaching.

Science.gov (United States)

Vargas-Koudriavtsev, Tatiana; Durán-Sedó, Randall; Herrera-Sancho, Óscar-Andrey

2018-06-01

Titanium is a less studied trace element in dental enamel. Literature relates an increased Titanium concentration with a decreased enamel crystal domain size, which in turn is related to a higher color value. The aim of our study was to analyze the effect of tooth bleaching agents on its concentration in dental enamel by means of confocal Raman spectroscopy. Human teeth were randomly distributed in six experimental groups (n=10) and submitted to different bleaching protocols according to the manufacturer´s instructions. Confocal Raman spectroscopy was carried out in order to identify and quantify the presence of titanium dioxide molecules in enamel prior to and during whitening. Statistical analysis included repeated measures analysis of variance ( p ≤0.05) and Bonferroni pairwise comparisons. Titanium dioxide concentration was negatively affected by the longer bleaching protocols (at-home bleaching gels). All in-office whitening products increased significantly the studied molecule ( p ≤0,05). All dental specimens depicted the presence of titanium dioxide as a trace element in dental enamel. Bleaching gels that have to be applied at higher concentrations but for shorter periods of time increase the concentration of titanium dioxide, whilst at-home whitening gels used for longer periods of time despite the lower concentration caused a loss in titanium. Key words: Bleaching, whitening, hydrogen peroxide, carbamide peroxide, Raman spectroscopy, titanium dioxide.

Multidisciplinary management including periodontics, orthodontics, implants, and prosthetics for an adult.

Science.gov (United States)

Pinho, Teresa; Neves, Manuel; Alves, Célia

2012-08-01

This article describes the complex dental treatment of an adult patient with multiple missing teeth, mild chronic periodontitis, and a malocclusion with a cant of the occlusal plane. After periodontal treatment, titanium implants and a miniscrew were placed to correct the occlusal plane canting with orthodontic treatment. Prosthodontic treatment was completed by using osseointegrated implants to replace the missing teeth. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Evidence-based quality assessment of 10-year orthodontic clinical trials in 4 major dental journals].

Science.gov (United States)

Sun, Yan-nan; Lei, Fei-fei; Cao, Yan-li; Fu, Min-kui

2010-02-01

To assess the quality of orthodontic clinical trials published in 4 major dental journals in the past 10 years and establish the reference standard for orthodontic clinical trials and quality control of dental journals. All the clinical trials published in Chinese Journal of Stomatology, West China Journal of Stomatology, Journal of Practice Stomatology and Chinese Journal of Orthodontics from 1999 to 2008 were searched. The demographic information of the papers was extracted and the quality of the clinical trials according to the consolidated standards of reporting trials (CONSORT) was assessed. Four hundred and ninety-four clinical trials were retrieved, and 21.3% (105/494) of them were supported by grants. For the study design, only 26.1% (129/494) were prospective studies, and 3.8% (19/494) were randomized clinical trials. It was hard to evaluate precisely due to the lack of information about the details of the study designs. For the randomized clinical trials, the lack of details for randomization, allocation concealment, blinding and intention to treat compromised the quality. The general quality of clinical trials in orthodontics is poor. It needs to be improved both in the clinical study design and the paper writing.

Factors influencing the choice of going to a dental quack practice for orthodontic treatment among the citizen of Bandung

Directory of Open Access Journals (Sweden)

Akhyar Dyni Zakyah

2016-11-01

Full Text Available Introduction: Braces is the treatment of choice for malocclusion. However, in recent years malocclusion no longer serves as the reason behind the orthodontic treatment. Many people use it for the fashion purposes and some of them got it from a dental quack. The purpose of this study was to understand factors that influenced citizen of Bandung to go to dental quack practice for orthodontics treatment. Methods: Cross-sectional study with purposive sampling technique consisting of 30 samples. Inclusion criteria were subject wearing metal braces from dental quack, live within area of Bandung, and willing to participate in the study. Exclusion criteria was subjects that refused to participate in the study. Results: The study showed that 73% of the subjects use the treatment for aligning teeth over getting along with the trend or the perception of beauty from using colorful bracket rubber. 63% chose a dental quack because of the suggestions from friends who had done it before them. Low income combined with the need for orthodontics treatment and inadequate information about dental braces influencing subjects choice to go to a dental quack. The study showed that socioeconomic environment highly influenced the decision to wear braces from a dental quack. Conclusion: The low price factor was the main reason for dental quack braces highly demanded. Common people need to be educated to get proper treatment for malocclusion and to go for improper provider of dental treatment.

Orthodontic treatment with preadjusted appliances and low-friction ligatures: experimental evidence and clinical observations.

Science.gov (United States)

Baccetti, Tiziano; Franchi, Lorenzo; Fortini, Arturo

2008-01-01

To describe the features of low-friction ligatures during the leveling and aligning phase of fixed appliance therapy with preadjusted brackets. Experimental in vitro and in vivo studies were carried out to test the performance of the low-friction system with regard to leveling and aligning of the dental arches, as well as to increasing the transverse dimension of the maxillary arch. The outcomes of experimental testing showed that the combination of the low-friction ligatures with the superelastic nickel-titanium wires produced a significantly smaller amount of binding at the bracket/archwire/ligature unit when compared to conventional elastomeric ligatures. The biomechanical consequences of the use of low-friction ligatures were shorter duration of orthodontic treatment during the leveling and aligning phase, concurrent dentoalveolar expansion of the dental arch, and the possibility of using biologically adequate orthodontic forces.

A novel antibacterial orthodontic cement containing a quaternary ammonium monomer dimethylaminododecyl methacrylate

Science.gov (United States)

Melo, Mary A.S.; Wu, Junling; Weir, Michael D.; Xu, Hockin H. K.

2015-01-01

Demineralized lesions in tooth enamel around orthodontic brackets are caused by acids from cariogenic biofilm. This study aimed to develop a novel antibacterial orthodontic cement by incorporating a quaternary ammonium monomer dimethylaminododecyl methacrylate (DMADDM) into a commercial orthodontic cement, and to investigate the effects on microcosm biofilm response and enamel bond strength. DMADDM, a recently-synthetized antibacterial monomer, was incorporated into orthodontic cement at 0%, 1.5%, 3% and 5% mass fractions. Bond strength of brackets to enamel was measured. A microcosm biofilm model was used to measure metabolic activity, lactic acid production, and colony-forming units (CFU) on orthodontic cements. Shear bond strength was not reduced at 3% DAMDDM (p > 0.1), but was slightly reduced at 5% DMADDM, compared to 0% DMADDM. Biofilm viability was substantially inhibited when in contact with orthodontic cement containing 3% DMADDM. Biofilm metabolic activity, lactic acid production, and CFU were much lower on orthodontic cement containing DMADDM than control cement (p orthodontic cement containing 3% DMADDM inhibited oral biofilms without compromising the enamel bond strength, and is promising to reduce or eliminate demineralization in enamel around orthodontic brackets. PMID:25035230

Corrosion resistance of stainless steel, nickel-titanium, titanium molybdenum alloy, and ion-implanted titanium molybdenum alloy archwires in acidic fluoride-containing artificial saliva: An in vitro study

Directory of Open Access Journals (Sweden)

Venith Jojee Pulikkottil

2016-01-01

Full Text Available Objective: (1 To evaluate the corrosion resistance of four different orthodontic archwires and to determine the effect of 0.5% NaF (simulating high fluoride-containing toothpaste of about 2250 ppm on corrosion resistance of these archwires. (2 To assess whether surface roughness (Ra is the primary factor influencing the corrosion resistance of these archwires. Materials and Methods: Four different archwires (stainless steel [SS], nickel-titanium [NiTi], titanium molybdenum alloy [TMA], and ion-implanted TMA were considered for this study. Surface characteristics were analyzed using scanning electron microscopy, atomic force microscopy (AFM, and energy dispersive spectroscopy. Linear polarization test, a fast electrochemical technique, was used to evaluate the corrosion resistance, in terms of polarization resistance of four different archwires in artificial saliva with NaF concentrations of 0% and 0.5%. Statistical analysis was performed by one-way analysis of variance. Results: The potentiostatic study reveals that the corrosion resistance of low-friction TMA (L-TMA > TMA > NiTi > SS. AFM analysis showed the surface Ra of TMA > NiTi > L-TMA > SS. This indicates that the chemical composition of the wire is the primary influential factor to have high corrosion resistance and surface Ra is only secondary. The corrosion resistance of all wires had reduced significantly in 0.5% acidic fluoride-containing artificial saliva due to formation of fluoride complex compound. Conclusion: The presence of 0.5% NaF in artificial saliva was detrimental to the corrosion resistance of the orthodontic archwires. Therefore, complete removal of residual high-fluorinated toothpastes from the crevice between archwire and bracket during tooth brushing is mandatory.

Galvanic Corrosion of and Ion Release from Various Orthodontic Brackets and Wires in a Fluoride-containing Mouthwash.

Science.gov (United States)

Tahmasbi, Soodeh; Ghorbani, Mohammad; Masudrad, Mahdis

2015-01-01

Background and aims. This study compared the galvanic corrosion of orthodontic wires and brackets from various manufacturers following exposure to a fluoride mouthwash. Materials and methods. This study was conducted on 24 lower central incisor 0.022" Roth brackets of four different commercially available brands (Dentaurum, American Orthodontics, ORJ, Shinye). These brackets along with stainless steel (SS) or nickel-titanium (NiTi) orthodontic wires (0.016", round) were immersed in Oral-B mouthwash containing 0.05% sodium fluoride for 28 days. The electric potential (EP) difference of each bracket-wire couple was measured with a Saturated Calomel Reference Electrode (Ag/AgCl saturated with KCl) via a voltmeter. The ions released in the electrolyte weremeasured with an atomic absorption spectrometer. All the specimens were assessed under a stereomicroscope and specimens with corrosion were analyzed with scanning electron microscopy (SEM). Data were analyzed using ANOVA. Results. The copper ions released from specimens with NiTi wire were greater than those of samples containing SS wire. ORJ brackets released more Cu ions than other samples. The Ni ions released from Shinye brackets were significantly more than those of other specimens (P brackets coupled with NiTi wires was higher than that of brackets coupled with SS wires. Light and electron microscopic observations showed greater corrosion of ORJ brackets. Conclusion. In fluoride mouthwash, Shinye and ORJ brackets exhibited greater corrosion than Dentaurum and American Orthodontics brackets. Stainless steel brackets used with NiTi wires showed greater corrosion and thus caution is recommended when using them.

Dental CT and orthodontic implants: imaging technique and assessment of available bone volume in the hard palate

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, Andre E-mail: andre.gahleitner@univie.ac.at; Podesser, Birgit; Schick, Susanne; Watzek, Georg; Imhof, Herwig

2004-09-01

Purpose: Palatal implants (PI) have been introduced for orthodontic treatment of dental and skeletal dysgnathia. Due to the restricted amount of bone in this region, precise preoperative anatomic information is necessary. The aim of this study was to determine whether dental CT could serve as a tool to locate the optimal size and position for orthodontic implant placement. Materials and methods: In 32 patients, where palatal implant placement was planned, axial CT scans of the maxillary bone were acquired. Using a standard dental software package (Easy Vision dental software package 2.1, Philips; Best, The Netherlands), paracoronal views were reconstructed and measurements of palatal bone height in 3 mm increments, dorsally from the incisive canal, were performed in the median and both paramedian regions. Results: The overall mean bone height was 5.01 mm (S.D. 2.60), ranging from 0 to 16.9 mm. The maximum palatal bone height was 6.17 mm (S.D. 2.81) at 6 mm dorsally from the incisive canal. Due to the lack of adequate bone (less than 4 mm), implant placement was not performed in 3 cases (7%). In the remaining 39 cases (93.0%), primary implant stability was achieved and complications, such as perforation of the palate, could be avoided. Conclusion: The results demonstrate that dental CT promises to be a valuable tool in evaluating the potential and optimal size and site for orthodontic implant placement.

Dental CT and orthodontic implants: imaging technique and assessment of available bone volume in the hard palate

International Nuclear Information System (INIS)

Gahleitner, Andre; Podesser, Birgit; Schick, Susanne; Watzek, Georg; Imhof, Herwig

2004-01-01

Purpose: Palatal implants (PI) have been introduced for orthodontic treatment of dental and skeletal dysgnathia. Due to the restricted amount of bone in this region, precise preoperative anatomic information is necessary. The aim of this study was to determine whether dental CT could serve as a tool to locate the optimal size and position for orthodontic implant placement. Materials and methods: In 32 patients, where palatal implant placement was planned, axial CT scans of the maxillary bone were acquired. Using a standard dental software package (Easy Vision dental software package 2.1, Philips; Best, The Netherlands), paracoronal views were reconstructed and measurements of palatal bone height in 3 mm increments, dorsally from the incisive canal, were performed in the median and both paramedian regions. Results: The overall mean bone height was 5.01 mm (S.D. 2.60), ranging from 0 to 16.9 mm. The maximum palatal bone height was 6.17 mm (S.D. 2.81) at 6 mm dorsally from the incisive canal. Due to the lack of adequate bone (less than 4 mm), implant placement was not performed in 3 cases (7%). In the remaining 39 cases (93.0%), primary implant stability was achieved and complications, such as perforation of the palate, could be avoided. Conclusion: The results demonstrate that dental CT promises to be a valuable tool in evaluating the potential and optimal size and site for orthodontic implant placement

Efficacy of Octacalcium Phosphate Collagen Composite for Titanium Dental Implants in Dogs

Directory of Open Access Journals (Sweden)

Tadashi Kawai

2018-02-01

Full Text Available Background: Previous studies showed that octacalcium (OCP collagen composite (OCP/Col can be used to repair human jaw bone defects without any associated abnormalities. The present study investigated whether OCP/Col could be applied to dental implant treatment using a dog tooth extraction socket model. Methods: The premolars of dogs were extracted; each extraction socket was extended, and titanium dental implants were placed in each socket. OCP/Col was inserted in the space around a titanium dental implant. Autologous bone was used to fill the other sockets, while the untreated socket (i.e., no bone substitute material served as a control. Three months after the operation, these specimens were analyzed for the osseointegration of each bone substitute material with the surface of the titanium dental implant. Results: In histomorphometric analyses, the peri-implant bone areas (BA% and bone-implant contact (BIC% were measured. There was no difference in BA% or BIC% between OCP/Col and autologous bone. Conclusion: These results suggested that OCP/Col could be used for implant treatment as a bone substitute.

Betel leaf toothpastes inhibit dental plaque formation on fixed orthodontic patients

Directory of Open Access Journals (Sweden)

Rizka Amelia Mayasari

2011-12-01

Full Text Available Background: Brackets, archwires, ligatures, and other fixed orthodontic appliance components complicate the use of conventional oral-hygiene measures. This often results in significant plaque accumulation around the bracket bases. The addition of betel leaf extract in toothpaste is expected to inhibit the growth of dental plaque. Purpose: The purpose of this study was to evaluate the effect of betel leaf toothpaste in inhibiting plaque formation on the fixed orthodontic patients. Methods: This study was done on dental student of Airlangga University aged 18–24 years, have been wearing fixed orthodontic appliances for 1–2 years, have no systemic diseases. The samples were divided into two groups, consisting of 20 samples. First group of samples brushed their teeth with betel group of samples brushed their teeth with betel brushed their teeth with betel leaf toothpaste and the second using placebo. The subjects were instructed to brush their teeth using Scrub method until reaching zero (0 scor of orthodontic plaque index (OPI. Plaque scores were taken again 4 hours after brushing. The statistical analysis was done by using paired t test. Results: The average of accumulated plaque on group that use betel leaf toothpaste was 25.54 and placebo was 41.09. The result showed that there was significant difference in plaque accumulation between the group with betel leaf toothpaste and placebo 4 hours after brushing (p = 0.001. Conclusion: In conclusion, betel leaf toothpaste is effective in inhibiting the dental plaque formation on the fixed orthodontic patients. Latar belakang: Bracket, kawat busur, kawat ligatur dan komponen peranti ortodonti cekat yang lain mempersulit pembersihan gigi secara konvensional. Hal ini sering menyebabkan terjadinya akumulasi plak di sekitar dasar braket. Penambahan ekstrak daun sirih yang mempunyai efek bakterisid pada pasta gigi diharapkan dapat menghambat pertumbuhan plak. Tujuan: Tujuan penelitian ini adalah untuk

Right wire in orthodontics: a review

OpenAIRE

Ali, Hashim

2015-01-01

Quality of orthodontic wire such as stiffness, hardness, resiliency, elasticity and working range are important determinants of the effectivenes of tooth movement. Commonly used types of orthodontic arch wire:1) stainless steel(ss) wire, 2) conventional nickel- titanium (NiTi)alloy wire,3) improved super elastic NiTi- alloy wire( also called low hysteresis(LH)wire), and titanium molybdenum alloy(TMA) wire.

Dentistry's oldest specialty: orthodontics and dentofacial orthopedics.

Science.gov (United States)

George, Raymond

2009-01-01

The American Association of Orthodontists (AAO) has 15,500 members worldwide and is the oldest and largest of the recognized dental specialties. A strategic planning process has identified six key challenges, and this article describes the progress that is being made in the areas of (a) consumer education, (b) volunteer leadership development, (c) recruitment and retention of orthodontic educators, (d) relationships with ADA and other healthcare organizations, (e) the AAO's role in international orthodontics, and (f) advocacy. The AAO is working for freedom of choice in dental healthcare providers; fee-for-service dental care; orthodontic insurance coverage as a benefit of employment, with direct reimbursement as the preferred plan; self-referred access to specialists; private and public funding that promote quality orthodontic care; and the retention of tax deductibility of dental healthcare benefits, including orthodontic care.

Fixed orthodontic appliances in the management of severe dental trauma in mixed dentition: a case report.

Science.gov (United States)

Ebrahim, Fouad-Hassan; Kulkarni, Gajanan

2013-01-01

We describe a case of complex trauma to the early mixed dentition in which tooth avulsion, intrusion, extrusion and lateral luxation were managed effectively using a fixed, non-rigid orthodontic splint after treatment with a traditional wire-composite splint had failed. The use of orthodontic brackets and flexible wires provided several advantages, such as the ability to splint severely malpositioned teeth; easy assessment without removing the splint; slow, gentle repositioning of traumatized teeth; and gradual reestablishment of the arch form allowing for ease of future prosthodontic rehabilitation. Therefore, orthodontic appliances should be considered as a viable option for managing complex dental trauma.

Scanning electron microscopy analysis of the growth of dental plaque on the surfaces of removable orthodontic aligners after the use of different cleaning methods

Directory of Open Access Journals (Sweden)

Levrini L

2015-12-01

Full Text Available Luca Levrini, Francesca Novara, Silvia Margherini, Camilla Tenconi, Mario Raspanti Department of Surgical and Morphological Sciences, Dental Hygiene School, Research Centre Cranio Facial Disease and Medicine, University of Insubria, Varese, Italy Background: Advances in orthodontics are leading to the use of minimally invasive technologies, such as transparent removable aligners, and are able to meet high demands in terms of performance and esthetics. However, the most correct method of cleaning these appliances, in order to minimize the effects of microbial colonization, remains to be determined. Purpose: The aim of the present study was to identify the most effective method of cleaning removable orthodontic aligners, analyzing the growth of dental plaque as observed under scanning electron microscopy. Methods: Twelve subjects were selected for the study. All were free from caries and periodontal disease and were candidates for orthodontic therapy with invisible orthodontic aligners. The trial had a duration of 6 weeks, divided into three 2-week stages, during which three sets of aligners were used. In each stage, the subjects were asked to use a different method of cleaning their aligners: 1 running water (control condition; 2 effervescent tablets containing sodium carbonate and sulfate crystals followed by brushing with a toothbrush; and 3 brushing alone (with a toothbrush and toothpaste. At the end of each 2-week stage, the surfaces of the aligners were analyzed under scanning electron microscopy. Results: The best results were obtained with brushing combined with the use of sodium carbonate and sulfate crystals; brushing alone gave slightly inferior results. Conclusion: On the basis of previous literature results relating to devices in resin, studies evaluating the reliability of domestic ultrasonic baths for domestic use should be encouraged. At present, pending the availability of experimental evidence, it can be suggested that dental

Dental Hygiene and Orthodontics: Effect of Ultrasonic Instrumentation on Bonding Efficacy of Different Lingual Orthodontic Brackets.

Science.gov (United States)

Scribante, Andrea; Sfondrini, Maria Francesca; Collesano, Vittorio; Tovt, Gaia; Bernardinelli, Luisa; Gandini, Paola

2017-01-01

Dental hygienists are often faced with patients wearing lingual orthodontic therapy, as ultrasonic instrumentation (UI) is crucial for oral health. As the application of external forces can lead to premature bonding failure, the aim of this study was to evaluate the effect of UI on shear bond strength (SBS) and on adhesive remnant index (ARI) of different lingual orthodontic brackets. 200 bovine incisors were divided into 10 groups. Four different lingual (STB, Ormco; TTR, Rocky Mountain Orthodontics; Idea, Leone; 2D, Forestadent) and vestibular control (Victory, 3M) brackets were bonded. UI was performed in half of specimens, whereas the other half did not receive any treatment. All groups were tested with a universal testing machine. SBS and ARI values were recorded. Statistical analysis was performed (significance: P = 0.05). TTR, Idea, and 2D lingual brackets significantly lowered SBS after UI, whereas for other braces no effect was recorded. Appliances with lower mesh area significantly reduced their adhesion capacity after UI. Moreover groups subjected to UI showed higher ARI scores than controls. UI lowered SBS of lingual appliances of small dimensions so particular care should be posed avoiding prolonged instrumentation around bracket base during plaque removal. Moreover, UI influenced also ARI scores.

High-intensity laser application in Orthodontics

Directory of Open Access Journals (Sweden)

Eduardo Franzotti Sant’Anna

Full Text Available ABSTRACT Introduction: In dental practice, low-level laser therapy (LLLT and high-intensity laser therapy (HILT are mainly used for dental surgery and biostimulation therapy. Within the Orthodontic specialty, while LLLT has been widely used to treat pain associated with orthodontic movement, accelerate bone regeneration after rapid maxillary expansion, and enhance orthodontic tooth movement, HILT, in turn, has been seen as an alternative for addressing soft tissue complications associated to orthodontic treatment. Objective: The aim of this study is to discuss HILT applications in orthodontic treatment. Methods: This study describes the use of HILT in surgical treatments such as gingivectomy, ulotomy, ulectomy, fiberotomy, labial and lingual frenectomies, as well as hard tissue and other dental restorative materials applications. Conclusion: Despite the many applications for lasers in Orthodontics, they are still underused by Brazilian practitioners. However, it is quite likely that this demand will increase over the next years - following the trend in the USA, where laser therapies are more widely used.

In vitro biological outcome of laser application for modification or processing of titanium dental implants.

Science.gov (United States)

Hindy, Ahmed; Farahmand, Farzam; Tabatabaei, Fahimeh Sadat

2017-07-01

There are numerous functions for laser in modern implant dentistry including surface treatment, surface coating, and implant manufacturing. As laser application may potentially improve osseointegration of dental implants, we systematically reviewed the literature for in vitro biological responses to laser-modified or processed titanium dental implants. The literature was searched in PubMed, ISI Web, and Scopus, using keywords "titanium dental implants," "laser," "biocompatibility," and their synonyms. After screening the 136 references obtained, 28 articles met the inclusion criteria. We found that Nd:YAG laser was the most commonly used lasers in the treatment or processing of titanium dental implants. Most of the experiments used cell attachment and cell proliferation to investigate bioresponses of the implants. The most commonly used cells in these assays were osteoblast-like cells. Only one study was conducted in stem cells. These in vitro studies reported higher biocompatibility in laser-modified titanium implants. It seems that laser radiation plays a vital role in cell response to dental implants; however, it is necessary to accomplish more studies using different laser types and parameters on various cells to offer a more conclusive result.

Galvanic Corrosion of and Ion Release from Various Orthodontic Brackets and Wires in a Fluoride-containing Mouthwash

Directory of Open Access Journals (Sweden)

Soodeh Tahmasbi

2015-09-01

Full Text Available Background and aims. This study compared the galvanic corrosion of orthodontic wires and brackets from various man-ufacturers following exposure to a fluoride mouthwash. Materials and methods. This study was conducted on 24 lower central incisor 0.022” Roth brackets of four different commercially available brands (Dentaurum, American Orthodontics, ORJ, Shinye. These brackets along with stainless steel (SS or nickel-titanium (NiTi orthodontic wires (0.016", round were immersed in Oral-B mouthwash containing 0.05% sodium fluoride for 28 days. The electric potential (EP difference of each bracket-wire couple was measured with a Satu-rated Calomel Reference Electrode (Ag/AgCl saturated with KCl via a voltmeter. The ions released in the electrolyte weremeasured with an atomic absorption spectrometer. All the specimens were assessed under a stereomicroscope and speci-mens with corrosion were analyzed with scanning electron microscopy (SEM. Data were analyzed using ANOVA. Results. The copper ions released from specimens with NiTi wire were greater than those of samples containing SS wire. ORJ brackets released more Cu ions than other samples. The Ni ions released from Shinye brackets were significantly more than those of other specimens (P < 0.05. Corrosion rate of brackets coupled with NiTi wires was higher than that of brack-ets coupled with SS wires. Light and electron microscopic observations showed greater corrosion of ORJ brackets. Conclusion. In fluoride mouthwash, Shinye and ORJ brackets exhibited greater corrosion than Dentaurum and American Orthodontics brackets. Stainless steel brackets used with NiTi wires showed greater corrosion and thus caution is recom-mended when using them.

The effect of orthodontic bonding materials on dental plaque accumulation and composition in vitro.

Science.gov (United States)

Badawi, H; Evans, R D; Wilson, M; Ready, D; Noar, J H; Pratten, J

2003-08-01

The aim of this study was to investigate the accumulation and composition of microcosm dental plaque on different orthodontic bonding materials using an in vitro model. Microcosm plaques were grown on discs of a range of bonding materials in a constant depth film fermentor. The biofilms were derived from human saliva and supplied with artificial saliva as a source of nutrients. The number of viable bacteria in the biofilms was determined and the streptococci present were identified to species level. The results showed that there was no significant difference in bacterial accumulation between different bonding materials, however, biofilms grown on materials which were fluoride releasing, did not contain Streptococcus mutans. This in vitro study has shown that the use of fluoride-releasing bonding materials may support the growth of supragingival plaque, which does not contain S. mutans.

The prevalence of dental anomalies in orthodontic patients at the State University of New York at Buffalo.

Science.gov (United States)

Al-Amiri, Athari; Tabbaa, Sawsan; Preston, Charles Brian; Al-Jewair, Thikriat

2013-05-01

To determine the prevalence of permanent tooth anomalies in patients attending the graduate orthodontic clinic at the State University of New York at Buffalo. Charts of 496 subjects (310 females and 186 males) met the inclusion criteria for this study. The mean ages were 16 years and 3 months for the combined gender sample that received orthodontic treatment in the graduate orthodontic clinic between 2007 and 2010. Full pretreatment records (intraoral photographs, digital study models, lateral cephalograms and panoramic radiographs) were used for the assessment. Charts were examined for these anomalies: agenesis, supernumerary, impaction and delayed tooth eruption. Subjects were categorized by gender and ethnicity. The percentages of the anomalies were assessed according to type of malocclusion, gender, race, location, tooth class and region in the dental arches. Sixty-four subjects (12.9%) had at least one occurrence of delayed eruption and impaction (DEI), followed by 47 subjects (9.5%) who had at least one occurrence of agenesis, and seven (1.4%) had a supernumerary condition. Approximately 80% of the subjects had no dental anomalies. The presence of more than one anomaly was observed in 61 subjects. Twelve subjects (2.4%) had both agenesis and DEI. Agenesis tended to be more common in class II malocclusions (p=0.012). The prevalence of permanent tooth anomalies was (20.4%). The percentage occurrence of DEI was the highest (12.9%) followed by dental agenesis (9.5%) and supernumerary teeth (1.4%) in the orthodontic patients at the State University of New York at Buffalo.

21 CFR 872.5410 - Orthodontic appliance and accessories.

Science.gov (United States)

2010-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5410 Orthodontic appliance and... device includes the preformed orthodontic band, orthodontic band material, orthodontic elastic band...

Electrochemical removal of biofilms from titanium dental implant surfaces.

Science.gov (United States)

Schneider, Sebastian; Rudolph, Michael; Bause, Vanessa; Terfort, Andreas

2018-06-01

The infection of dental implants may cause severe inflammation of tissue and even bone degradation if not treated. For titanium implants, a new, minimally invasive approach is the electrochemical removal of the biofilms including the disinfection of the metal surface. In this project, several parameters, such as electrode potentials and electrolyte compositions, were varied to understand the underlying mechanisms. Optimal electrolytes contained iodide as well as lactic acid. Electrochemical experiments, such as cyclic voltammetry or measurements of open circuit potentials, were performed in different cell set-ups to distinguish between different possible reactions. At the applied potentials of E species are formed at the anode, such as triiodide and hydrogen peroxide. Ex situ tests with model biofilms of E. coli clearly demonstrated the effectiveness of the respective anolytes in killing the bacteria, as determined by the LIVE/DEAD™ assay. Using optimized electrolysis parameters of 30 s at 7.0 V and 300 mA, a 14-day old wildtype biofilm could be completely removed from dental implants in vitro. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparison of the superelasticity of different nickel?titanium orthodontic archwires and the loss of their properties by heat treatment

OpenAIRE

Bellini, Humberto; Moyano, Javier; Gil, Javier; Puigdollers, Andreu

2016-01-01

The aim of this work is to describe and compare mechanical properties of eight widely used nickel?titanium orthodontic wires under uniform testing conditions and to determine the influence of the heat treatments on the loss of the superelasticity. Ten archwires from two batches from eight different manufacturers were evaluated. A three-point bending test was performed, in accordance with ISO 15841:2006, on 80 round nickel?titanium archwire segments of 0.016?inch. To obtain a load-deflection c...

Regular nicotine intake increased tooth movement velocity, osteoclastogenesis and orthodontically induced dental root resorptions in a rat model

Science.gov (United States)

Kirschneck, Christian; Maurer, Michael; Wolf, Michael; Reicheneder, Claudia; Proff, Peter

2017-01-01

Orthodontic forces have been reported to significantly increase nicotine-induced periodontal bone loss. At present, however, it is unknown, which further (side) effects can be expected during orthodontic treatment at a nicotine exposure corresponding to that of an average European smoker. 63 male Fischer344 rats were randomized in three consecutive experiments of 21 animals each (A/B/C) to 3 experimental groups (7 rats, 1/2/3): (A) cone-beam-computed tomography (CBCT); (B) histology/serology; (C) reverse-transcription quantitative real-time polymerase chain reaction (RT-qPCR)/cotinine serology—(1) control; (2) orthodontic tooth movement (OTM) of the first and second upper left molar (NiTi closed coil spring, 0.25 N); (3) OTM with 1.89 mg·kg−1 per day s.c. of L(−)-nicotine. After 14 days of OTM, serum cotinine and IL-6 concentration as well as orthodontically induced inflammatory root resorption (OIIRR), osteoclast activity (histology), orthodontic tooth movement velocity (CBCT, within 14 and 28 days of OTM) and relative gene expression of known inflammatory and osteoclast markers were quantified in the dental-periodontal tissue (RT–qPCR). Animals exposed to nicotine showed significantly heightened serum cotinine and IL-6 levels corresponding to those of regular European smokers. Both the extent of root resorption, osteoclast activity, orthodontic tooth movement and gene expression of inflammatory and osteoclast markers were significantly increased compared to controls with and without OTM under the influence of nicotine. We conclude that apart from increased periodontal bone loss, a progression of dental root resorption and accelerated orthodontic tooth movement are to be anticipated during orthodontic therapy, if nicotine consumption is present. Thus patients should be informed about these risks and the necessity of nicotine abstinence during treatment. PMID:28960194

[Preprosthetic orthodontic treatments

NARCIS (Netherlands)

Prahl-Andersen, B.; Prahl, C.; Baat, C. de; Creugers, N.H.J.

2014-01-01

The objective of a preprosthetic orthodontic treatment is to position the teeth in such a way that a treatment with (fixed) dental prostheses is made possible or simplified or to affect the result of this treatment positively. Conceivable preprosthetic orthodontic treatments are: correcting primary

Porous Titanium for Dental Implant Applications

Directory of Open Access Journals (Sweden)

Zena J. Wally

2015-10-01

Full Text Available Recently, an increasing amount of research has focused on the biological and mechanical behavior of highly porous structures of metallic biomaterials, as implant materials for dental implants. Particularly, pure titanium and its alloys are typically used due to their outstanding mechanical and biological properties. However, these materials have high stiffness (Young’s modulus in comparison to that of the host bone, which necessitates careful implant design to ensure appropriate distribution of stresses to the adjoining bone, to avoid stress-shielding or overloading, both of which lead to bone resorption. Additionally, many coating and roughening techniques are used to improve cell and bone-bonding to the implant surface. To date, several studies have revealed that porous geometry may be a promising alternative to bulk structures for dental implant applications. This review aims to summarize the evidence in the literature for the importance of porosity in the integration of dental implants with bone tissue and the different fabrication methods currently being investigated. In particular, additive manufacturing shows promise as a technique to control pore size and shape for optimum biological properties.

Type and location of findings in dental panoramic tomographs in 7-12-year-old orthodontic patients.

Science.gov (United States)

Pakbaznejad Esmaeili, Elmira; Ekholm, Marja; Haukka, Jari; Waltimo-Sirén, Janna

2016-01-01

The Radiation and Nuclear Safety Authority in Finland has paid attention to the large numbers of dental panoramic tomographs (DPTs), particularly in 7-12-year-old children. The majority of these radiographs are taken for orthodontic reasons. Because of the high radiosensitivity of children, the size of the irradiated field should be carefully chosen to yield the necessary diagnostic information at the lowest possible dose. The purpose of the present study was, therefore, to assess the outcome of DPTs within this age group in terms of type and location of pathological findings. It was also hypothesized that DPTs of orthodontic patients rarely display unrestored caries. Four hundred and forty-one DPTs, taken of 7-12-year-old children in 2010-2014, were randomly sampled. The 413 of them (94%) that had been taken for orthodontic reasons were analysed. All pathologic findings were restricted to the tooth-bearing area and there was no pathology in the bone structure or any incidental findings in the region of temporomandibular joint. Unlike hypothesized, 27% of the orthodontic DPTs showed caries in deciduous teeth and 16% in permanent teeth. A sub-sample of 229 DPTs, analysed for developmental dental and occlusal problems, most commonly displayed crowding (50%), positional anomalies and local problems with tooth eruption (32%), as well as hyperodontia (15%). Inclusion of only the actual area of interest in the image field should be considered case-specifically as a means to reduce the radiation dose.

Association of Dental Anomalies with Different Types of Malocclusions in Pretreatment Orthodontic Patients.

Science.gov (United States)

Dwijendra, K S; Parikh, Vishal; George, Soja Sara; Kukkunuru, Gururam Tej; Chowdary, Gali Nagarjuna

2015-06-01

The study is planned to correlate the existence of dental anomalies with different types of malocclusion as the occurrence of anomalies is common in malocclusion. The present study was conducted among 430 patients with different types of malocclusion as 161 patients having Class I, 203 with Class II, and 66 with Class III malocclusion. The age of the patients ranged from 12 to 15 years. Diagnosis was done on the basis of history, clinical, cephalometric, radiographs, and dental cast examination. The level of significance was set at P = 0.05. Most common anomaly was rotation of teeth (18.80%), followed by hypodontia (10.90%), and least occurring was gemination, fusion, talon's cusp, and dilacerations. 31.4% showed one dental anomaly, whereas 11.9% exhibited two or more dental anomalies. The highest mean value of all the dental anomalies was seen with severe cases of malocclusion and also significant differences were observed according to gender. The present study investigated various dental anomalies in relation to malocclusion. It was found that 31.4% showed one dental anomaly, whereas 11.9% exhibited two or more dental anomalies. Hence, careful prior investigation of dental anomalies is necessary for better orthodontic treatment planning to reduce the complications.

[Conservative treatment of upper anterior dental discrepancy during orthodontic therapy].

Science.gov (United States)

Messina, G; Verzì, P; Pappalardo, S

1999-06-01

The orthodontic therapeutic sequence used in cases with dento-dental discrepancy for reduced mesiodistal size and congenital absent lateral upper incisors, is described. The importance of correct conoid tooth replacement in the programmed space between the other teeth and its restorative treatment in order to obtain the best biomechanical control is stressed. The contemporaneous presence of the form and volume anomaly of the 12th and the missing 22nd due to agenesia demanded an interdisciplinary approach. For the restoration of the conoid tooth the authors used a microhybrid composite for the alloy properties with the grain size of the inorganic particles. In fact this type of composite responds well to mechanical stress and has a high shining capacity and good aesthetical rendering. Meanwhile the temporary dental prothesis solution of the 22nd in this case has suggested the application of the artificial element on the superior Hawley holding plaque.

The influence of adding modified zirconium oxide-titanium dioxide nano-particles on mechanical properties of orthodontic adhesive: an in vitro study.

Science.gov (United States)

Felemban, Nayef H; Ebrahim, Mohamed I

2017-01-13

The purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive. ZrO2-TiO2 (Zirconium oxide, HWNANO, Hongwu International Group Ltd, China) -Titanium dioxide, Nanoshell, USA) nanopowder were incorporated into orthodontic adhesive (Transbond XT, 3 M Unitek, Monrovia, USA) with different concentrations (0.5% weight nonofiller and 1% weight nanofiller). The size of nanoparticle was 70-80 nm for ZrO2 and less than 50 nm for TiO2. For measuring the shear bond strength of the three groups of orthodontic adhesives [Transbond (control), Transbond mixed with 0.5% weight ZrO2-TiO2, and Transbond mixed with 1% weight ZrO2-TiO2], 30 freshly extracted human first premolars were used and bonded with stainless steel metal brackets (Dentaurum®, Discovery®, Deutschland), using the 3 orthodontic adhesives and 3 M Unitek; Transbond TM Plus Self-Etching Primer (10 samples in each group). The recorded values of compressive strength and tensile strength (measured separately on 10 samples of orthodontic adhesives (add the 3 D size of sample, light cured for 40 s on both sides) of each orthodontic adhesives), as well as the shear bond strength in Mega Pascal unit (MPa) were collected and exposed to one-way analysis of variance (ANOVA) and Tukey's post-hoc tests. orthodontic adhesive with 1% weight ZrO2-TiO2 showed the highest mean compressive (73.42 ± 1.55 MPa, p: 0.003, F: 12.74), tensile strength (8.65 ± 0.74 MPa, p: 0.001, F: 68.20), and shear bond strength (20.05 ± 0.2 MPa, p: 0.001, F: 0.17). Adding ZrO2-TiO2 nanoparticle to orthodontic adhesive increased compressive strength, tensile strength, and shear bond strength in vitro, but in vivo studies and randomized clinical trials are needed to validate the present findings.

Evaluation of dental plaque control in patients wearing fixed orthodontic appliances: a clinical study.

Science.gov (United States)

Ousehal, Lahcen; Lazrak, Laila; Es-Said, Rabia; Hamdoune, Hind; Elquars, Farid; Khadija, Amine

2011-03-01

Multibracket orthodontic appliances increase dental plaque retention and make teethbrushing more difficult for patients. As a result, advice from the orthodontist on oral hygiene along with patient motivation regarding teethbrushing are particularly important. The aim of this study was to compare the efficacy of electric toothbrushes with that of manual brushing associated with mouth-rinses comprising chlorhexidine (0.12%) and 0% alcohol. To this end, 84 patients receiving current orthodontic treatment were randomly selected from patients treated at the Dento-Facial Orthopedics department in the Casablanca Dental Consultation and Treatment Center. Selected patients were divided into three groups: Group 1: manual teethbrushing; Group 2: electric teethbrushing; Group 3: manual brushing combined with mouth rinse. Oral hygiene was assessed using the Loe-Silness plaque and gingival indices. Measurements were made before and 4 weeks after the observation period. Results were subjected to statistical comparison in order to determine the group showing greatest improvement and to deduce the best means of controlling bacterial plaque. The electric toothbrush and the chlorhexidine mouth rinse appear to control dental plaque more effectively than manual teethbrushing alone. Following this study, patients receiving multibracket treatment were invited to combine manual brushing with short clinical mouth-rinsing sessions or to use an electric toothbrush. Copyright © 2011 CEO. Published by Elsevier Masson SAS. All rights reserved.

21 CFR 872.5500 - Extraoral orthodontic headgear.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Extraoral orthodontic headgear. 872.5500 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5500 Extraoral orthodontic headgear. (a) Identification. An extraoral orthodontic headgear is a device intended for use with an orthodontic appliance to...

Periodontic and orthodontic treatment in adults.

Science.gov (United States)

Ong, Marianne M A; Wang, Hom-Lay

2002-10-01

The purpose of this article is to provide an update of the interrelationship between periodontics and orthodontics in adults. Specific areas reviewed are the reaction of periodontal tissue to orthodontic forces, the influence of tooth movement on the periodontium, the effect of circumferential supracrestal fiberotomy in preventing orthodontic relapse, the effect of orthodontic treatment on the periodontium, microbiology associated with orthodontic bands, and mucogingival and esthetic considerations. In addition, the relationship between orthodontics and implants (eg, using dental implants for orthodontic anchorage) is discussed.

Scanning electron microscopy analysis of the growth of dental plaque on the surfaces of removable orthodontic aligners after the use of different cleaning methods.

Science.gov (United States)

Levrini, Luca; Novara, Francesca; Margherini, Silvia; Tenconi, Camilla; Raspanti, Mario

2015-01-01

Advances in orthodontics are leading to the use of minimally invasive technologies, such as transparent removable aligners, and are able to meet high demands in terms of performance and esthetics. However, the most correct method of cleaning these appliances, in order to minimize the effects of microbial colonization, remains to be determined. The aim of the present study was to identify the most effective method of cleaning removable orthodontic aligners, analyzing the growth of dental plaque as observed under scanning electron microscopy. Twelve subjects were selected for the study. All were free from caries and periodontal disease and were candidates for orthodontic therapy with invisible orthodontic aligners. The trial had a duration of 6 weeks, divided into three 2-week stages, during which three sets of aligners were used. In each stage, the subjects were asked to use a different method of cleaning their aligners: 1) running water (control condition); 2) effervescent tablets containing sodium carbonate and sulfate crystals followed by brushing with a toothbrush; and 3) brushing alone (with a toothbrush and toothpaste). At the end of each 2-week stage, the surfaces of the aligners were analyzed under scanning electron microscopy. The best results were obtained with brushing combined with the use of sodium carbonate and sulfate crystals; brushing alone gave slightly inferior results. On the basis of previous literature results relating to devices in resin, studies evaluating the reliability of domestic ultrasonic baths for domestic use should be encouraged. At present, pending the availability of experimental evidence, it can be suggested that dental hygienists should strongly advise patients wearing orthodontic aligners to clean them using a combination of brushing and commercially available tablets for cleaning oral appliances.

Orthodontic treatment in patients with aggressive periodontitis.

Science.gov (United States)

Carvalho, Cássio Volponi; Saraiva, Luciana; Bauer, Flávio Paim Falcão; Kimura, Rui Yoshio; Souto, Maria Luisa Silveira; Bernardo, Carlos Cheque; Pannuti, Cláudio Mendes; Romito, Giuseppe Alexandre; Pustiglioni, Francisco Emílio

2018-04-01

Aggressive periodontitis (AP) is a condition that promotes breakdown of the periodontal tissues in a short time. In severe cases, pathologic migration of teeth and tooth loss can occur, producing esthetic and functional problems for the patient. Orthodontic treatment may be recommended to restore esthetics and masticatory function. We assessed the effects of orthodontic movement in the periodontal tissues of treated patients with AP. Ten subjects (ages 25.0 ± 5.22 years) with AP received periodontal treatment followed by orthodontic treatment. Maintenance sessions were performed monthly under a strict dental biofilm control. They were compared with 10 periodontally healthy subjects (ages 22.9 ± 5.23 years) who received orthodontic treatment. Probing pocket depth, clinical attachment level, bleeding on probing, and dental plaque index were measured at baseline, after orthodontic treatment, and after 4 months. Statistical analysis showed improvement in all clinical parameters between baseline and 4 months after orthodontic treatment: probing pocket depth (0.29 mm), clinical attachment level (0.38 mm), bleeding on probing (4.0%), and dental plaque index (11%). The periodontal parameters of the AP patients remained stable during orthodontic treatment under strict biofilm control. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Non-Destructive Analysis of Basic Surface Characteristics of Titanium Dental Implants Made by Miniature Machining

Science.gov (United States)

Babík, Ondrej; Czán, Andrej; Holubják, Jozef; Kameník, Roman; Pilc, Jozef

2016-12-01

One of the most best-known characteristic and important requirement of dental implant is made of biomaterials ability to create correct interaction between implant and human body. The most implemented material in manufacturing of dental implants is titanium of different grades of pureness. Since most of the implant surface is in direct contact with bone tissue, shape and integrity of said surface has great influence on the successful osseointegration. Among other characteristics of titanium that predetermine ideal biomaterial, it shows a high mechanical strength making precise machining miniature Increasingly difficult. The article is focused on evaluation of the resulting quality, integrity and characteristics of dental implants surface after machining.

Numerical assessment of bone remodeling around conventionally and early loaded titanium and titanium-zirconium alloy dental implants.

Science.gov (United States)

Akça, Kıvanç; Eser, Atılım; Çavuşoğlu, Yeliz; Sağırkaya, Elçin; Çehreli, Murat Cavit

2015-05-01

The aim of this study was to investigate conventionally and early loaded titanium and titanium-zirconium alloy implants by three-dimensional finite element stress analysis. Three-dimensional model of a dental implant was created and a thread area was established as a region of interest in trabecular bone to study a localized part of the global model with a refined mesh. The peri-implant tissues around conventionally loaded (model 1) and early loaded (model 2) implants were implemented and were used to explore principal stresses, displacement values, and equivalent strains in the peri-implant region of titanium and titanium-zirconium implants under static load of 300 N with or without 30° inclination applied on top of the abutment surface. Under axial loading, principal stresses in both models were comparable for both implants and models. Under oblique loading, principal stresses around titanium-zirconium implants were slightly higher in both models. Comparable stress magnitudes were observed in both models. The displacement values and equivalent strain amplitudes around both implants and models were similar. Peri-implant bone around titanium and titanium-zirconium implants experiences similar stress magnitudes coupled with intraosseous implant displacement values under conventional loading and early loading simulations. Titanium-zirconium implants have biomechanical outcome comparable to conventional titanium implants under conventional loading and early loading.

Artefacts in multimodal imaging of titanium, zirconium and binary titanium-zirconium alloy dental implants: an in vitro study.

Science.gov (United States)

Smeets, Ralf; Schöllchen, Maximilian; Gauer, Tobias; Aarabi, Ghazal; Assaf, Alexandre T; Rendenbach, Carsten; Beck-Broichsitter, Benedicta; Semmusch, Jan; Sedlacik, Jan; Heiland, Max; Fiehler, Jens; Siemonsen, Susanne

2017-02-01

To analyze and evaluate imaging artefacts induced by zirconium, titanium and titanium-zirconium alloy dental implants. Zirconium, titanium and titanium-zirconium alloy implants were embedded in gelatin and MRI, CT and CBCT were performed. Standard protocols were used for each modality. For MRI, line-distance profiles were plotted to quantify the accuracy of size determination. For CT and CBCT, six shells surrounding the implant were defined every 0.5 cm from the implant surface and histogram parameters were determined for each shell. While titanium and titanium-zirconium alloy induced extensive signal voids in MRI owing to strong susceptibility, zirconium implants were clearly definable with only minor distortion artefacts. For titanium and titanium-zirconium alloy, the MR signal was attenuated up to 14.1 mm from the implant. In CT, titanium and titanium-zirconium alloy resulted in less streak artefacts in comparison with zirconium. In CBCT, titanium-zirconium alloy induced more severe artefacts than zirconium and titanium. MRI allows for an excellent image contrast and limited artefacts in patients with zirconium implants. CT and CBCT examinations are less affected by artefacts from titanium and titanium-zirconium alloy implants compared with MRI. The knowledge about differences of artefacts through different implant materials and image modalities might help support clinical decisions for the choice of implant material or imaging device in the clinical setting.

In vivo evaluation of immediately loaded stainless steel and titanium orthodontic screws in a growing bone.

Directory of Open Access Journals (Sweden)

Kerstin Gritsch

Full Text Available The present work intends to evaluate the use of immediate loaded orthodontic screws in a growing model, and to study the specific bone response. Thirty-two screws (half of stainless steel and half of titanium were inserted in the alveolar bone of 8 growing pigs. The devices were immediately loaded with a 100 g orthodontic force. Two loading periods were assessed: 4 and 12 weeks. Both systems of screws were clinically assessed. Histological observations and histomorphometric analysis evaluated the percent of "bone-to-implant contact" and static and dynamic bone parameters in the vicinity of the devices (test zone and in a bone area located 1.5 cm posterior to the devices (control zone. Both systems exhibit similar responses for the survival rate; 87.5% and 81.3% for stainless steel and titanium respectively (p = 0.64; 4-week period, and 62.5% and 50.0% for stainless steel and titanium respectively (p = 0.09; 12-week period. No significant differences between the devices were found regarding the percent of "bone-to-implant contact" (p = 0.1 or the static and dynamic bone parameters. However, the 5% threshold of "bone-to-implant contact" was obtained after 4 weeks with the stainless steel devices, leading to increased survival rate values. Bone in the vicinity of the miniscrew implants showed evidence of a significant increase in bone trabecular thickness when compared to bone in the control zone (p = 0.05. In our study, it is likely that increased trabecular thickness is a way for low density bone to respond to the stress induced by loading.

In vivo evaluation of immediately loaded stainless steel and titanium orthodontic screws in a growing bone.

Science.gov (United States)

Gritsch, Kerstin; Laroche, Norbert; Bonnet, Jeanne-Marie; Exbrayat, Patrick; Morgon, Laurent; Rabilloud, Muriel; Grosgogeat, Brigitte

2013-01-01

The present work intends to evaluate the use of immediate loaded orthodontic screws in a growing model, and to study the specific bone response. Thirty-two screws (half of stainless steel and half of titanium) were inserted in the alveolar bone of 8 growing pigs. The devices were immediately loaded with a 100 g orthodontic force. Two loading periods were assessed: 4 and 12 weeks. Both systems of screws were clinically assessed. Histological observations and histomorphometric analysis evaluated the percent of "bone-to-implant contact" and static and dynamic bone parameters in the vicinity of the devices (test zone) and in a bone area located 1.5 cm posterior to the devices (control zone). Both systems exhibit similar responses for the survival rate; 87.5% and 81.3% for stainless steel and titanium respectively (p = 0.64; 4-week period), and 62.5% and 50.0% for stainless steel and titanium respectively (p = 0.09; 12-week period). No significant differences between the devices were found regarding the percent of "bone-to-implant contact" (p = 0.1) or the static and dynamic bone parameters. However, the 5% threshold of "bone-to-implant contact" was obtained after 4 weeks with the stainless steel devices, leading to increased survival rate values. Bone in the vicinity of the miniscrew implants showed evidence of a significant increase in bone trabecular thickness when compared to bone in the control zone (p = 0.05). In our study, it is likely that increased trabecular thickness is a way for low density bone to respond to the stress induced by loading.

Orthodontic treatment in patients with reduced periodontal insertion

Directory of Open Access Journals (Sweden)

Fernanda Labayle Couhat Carraro

2009-12-01

Full Text Available The aim of this study was to conduct a literature review to investigate orthodontic treatment in periodontal patients. Periodontal disease causes loss of attachment that results in pathological dental migration Periodontal disease can affect young persons and adults, with a higher incidence in adults, so that the number of adults seeking orthodontic treatment has increased significantly. The periodontal disease must be controlled before the orthodontic treatment begins, and during the treatment it is important to keep the patient motivated as regards control of oral hygiene, with periodical reviews by the periodontist. With regard to assembly of the fixed appliance, special care is required not to place the accessories close to the gingival margin, in addition to using light forces porportional to the amount of periodontal attachment, and kept within the biological limits of movement. Correction of the poorly positioned teeth and controlled orthodontic movement can favor remodeling of the alveolar process in all directions. After orthodontic treatment it is important plan containment individually. Integrated orthodontic-periodontal teamwork is essential for reestablishing a healthy periodontium and satisfactory occlusion.

An evaluation of willingness to pay for orthodontic treatments in patients of Shiraz Dental School Clinic

Directory of Open Access Journals (Sweden)

Vahid Moshkelgosha DDS, MSc 1

2013-04-01

Full Text Available BACKGROUND AND AIM:Estimation of need and demand for orthodontic treatment is important for both healthprofessionals and health policymakers. Need assessment is traditionally done using experts’ opinions;however, patient-centered evaluation can provide a bigger picture ofpatient’s esthetic and psychological needs. The willingness to pay(WTP technique is a potentially valid tool for assessing the patient views on their needs and for market research inhealthcare.The aim of this study was to evaluate the need anddemand for orthodontic treatment with a patient-centeredapproach using economic analysis.METHODS:A cross-sectional study was designed. Two hundred people attending Shiraz Dental School Clinic wereinterviewed. Their views on the importance and costs of orthodontic treatments and the maximum amountthat theywould pay for such treatments were obtained along with their demographic and socioeconomic factors. Their WTP wasused to elicit values for orthodontic treatment using contingent valuation method (CVM and econometric techniques.RESULTS:The response rate was 95%. Although 53.5% of respondents felt they needed orthodontic treatment, only33.7% had expressed their need, and just 17.5% hadactually gone for such treatment. The main reason for not takingthe treatment was its cost (56.5%. More than 60% of respondents viewed orthodontics as only a luxurytreatment and70% considered beauty and elegant smile as the most, or one of the most, benefit(s of orthodontic treatments. WTPresults showed that orthodontic services have highdemand elasticity. Assuming fixed monthly income of8 millionRials, 61% of subjects were ready to pay 20 millionRials for a course of orthodontic treatment.CONCLUSIONS:The result showed that esthetics and high cost of treatment were respectively the most intriguing andthemain inhibiting factors for getting orthodontic treatment. Economic evaluation showed a high elastic estimation fororthodontic treatment.

Orthodontic exposure of multiple lmpactions: a case report.

Science.gov (United States)

Munda-Lacson, Maridin C; Venugopal, Adith

2014-01-01

There are rare cases of impacted permanent central incisors with dilacerations, a dental deformity characterized by pronounced angulations of the longitudinal tooth axis. Impaction of maxillary canines is an orthodontic anomaly that causes facial and dentoalveolar system problems, both functional and esthetic. A combination of surgery and orthodontics is important in bringing impacted teeth to their ideal position in the dental arch. This is a case report of a 10-year-old patient with impacted and dilacerated right central incisor and impacted left maxillary canine, following surgical exposure and appropriate orthodontic traction, the impacted teeth were surgically exposed and aligned into the dental arch.

Influence of different implant materials on the primary stability of orthodontic mini-implants

OpenAIRE

Chin-Yun Pan; Szu-Ting Chou; Yu-Chuan Tseng; Yi-Hsin Yang; Chao-Yi Wu; Ting-Hsun Lan; Pao-Hsin Liu; Hong-Po Chang

2012-01-01

This study evaluates the influence of different implant materials on the primary stability of orthodontic mini-implants by measuring the resonance frequency. Twenty-five orthodontic mini-implants with a diameter of 2 mm were used. The first group contained stainless steel mini-implants with two different lengths (10 and 12 mm). The second group included titanium alloy mini-implants with two different lengths (10 and 12 mm) and stainless steel mini-implants 10 mm in length. The mini-implants w...

Numerical simulation of the force generated by a superelastic NiTi orthodontic archwire during tooth alignment phase: comparison between different constitutive models

Science.gov (United States)

Gannoun, M.; Laroussi Hellara, M.; Bouby, C.; Ben Zineb, T.; Bouraoui, T.

2018-04-01

Nickel Titanium (NiTi) Superelastic (SE) Shape Memory Alloys (SMAs) are widely considered for applications that need high reversible strain or high recovery forces. In particular, the SE SMAs present a high interest for biomedical applications such as endodontic and orthodontic apparatus. They are available in a large variety of archwires exerting continuum forces to ensure the dental displacement. The purpose of this study is to report the clinical implications of NiTi SE wires for dental treatment in a given configuration. Three main constitutive models of the literature (Lagoudas and Boyd 1996 Int. J. Plast. 12 805–842, Auricchio and Petrini 2004 Int. J. Numer. Meth. Engng. 61 807–836 and Chemisky et al 2011 Mech. Mater. 68 361–376) are considered for the finite element (FE) numerical simulations of the SMA archwires response. Tensile tests had been carried out in order to identify the material parameters of these constitutive models. The FE numerical study allowed to predict the dental displacement and its corresponding orthodontic force level exerted by the wire in similar conditions to those in the oral environment. This work allows to predict the orthodontic generated load by a NiTi SE archwire with a 0.64 × 0.46 mm2 rectangular cross section under prescribed thermomechanical conditions. The effect of the temperature and the alveolar bone stiffness on the orthodontic load level and the tooth displacement degree has been investigated. The performed numerical simulations demonstrate that the orthodontic load is sensitive to the displacement magnitude, to the tooth stiffness and to the temperature variations. The obtained forces applied continuously and at a constant level are within the acceptable orthodontic force level range. Some directives are therefore provided to help orthodontists to select the optimal archwire.

Long-term surgical-orthodontic management of hemimandibular hyperplasia.

Science.gov (United States)

Bennett, Samuel C; Goonewardene, Mithran S

2016-05-01

Hemimandibular hyperplasia (HH), also known as hemimandibular hypertrophy, is characterised by excessive unilateral three-dimensional growth of the mandible after birth. Vertical unilateral elongation of the mandible becomes clinically evident as a rare form of vertical facial asymmetry. Aberrant growth of the facial skeleton affects the developing dentition and the dental compensatory mechanism is usually unable to maintain optimal occlusal relationships. The resulting malocclusion is effectively managed by combined surgical-orthodontic care to address the facial, skeletal and dental problems that confront clinicians. Orthodontists are advised to assess patients with HH during the post-treatment retention stage for continuing mandibular growth and assess the stability of treatment outcomes with long-term follow-up and records as required. To present a case of hemimandibular hyperplasia treated successfully by combined surgical-orthodontic care and evaluated for stability over a seven-year follow-up period. Surgical-orthodontic management was accomplished in four stages: 1) pre-surgical orthodontic; 21 surgical; 3) post-surgical orthodontic; and 4) post-treatment orthodontic retention. Complete orthodontic records, including extra- and intra-oral photographs, study models, and cephalograms plus panoramic radiographs were taken at the pretreatment, post-treatment, and seven-year orthodontic retention time-points. Facial, skeletal and dental goals were achieved in the three planes of space and the long-term stability of the treatment results was shown during a post-treatment orthodontic retention period of seven years. Hemimandibular hyperplasia is a true growth anomaly which may be managed effectively. Clinicians may expect successful long-term correction and stability by utilising a comprehensive surgical-orthodontic treatment approach.

Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V

International Nuclear Information System (INIS)

Souza, Júlio C.M.; Henriques, Bruno; Ariza, Edith; Martinelli, Antonio E.; Nascimento, Rubens M.; Silva, Filipe S.; Rocha, Luís A.; Celis, Jean-Pierre

2014-01-01

The aim of this study was to evaluate the evolution of mechanical properties and chemical variation across veneering dental porcelain fused to different titanium-based substrates. Test samples were synthesized by fusing dental feldspar-based porcelain onto commercially pure titanium grade II or Ti6Al4V alloy. Samples were cross-sectioned at angles of 10 and 90° to the interface plane. Afterwards, nanoindentation tests and Scanning Electron Microscopy (SEM) imaging coupled to an Energy Dispersive Spectroscopy (EDS) system were carried out across interfaces extending from the metal towards the porcelain area. Elemental diffusion profiles across the porcelain-to-metal interfaces were also obtained by EDS analysis. The mismatch in mechanical properties found in porcelain-to-Ti6Al4V interfaces was lower than that of porcelain-to-CP titanium. Cracking was noticed at low-thickness veneering dental porcelain regions after the nanoindentation tests of samples cross-sectioned at low angles to the interface plane. A wide reaction zone between titanium and porcelain as well as higher incidence of defects was noticed at the porcelain-to-CP titanium interfaces. This study confirmed Ti6Al4V as an improved alternative to CP-titanium as it showed to establish a better interface with the veneering dental porcelain considering the slight chemical interaction and the lower mechanical properties mismatch. The elastic modulus of porcelain-to-Ti6Al4V samples showed to be less sensitive to porcelain thickness variations. - Highlights: • This study reveals mechanical and chemical behaviors across porcelain/titanium interfaces. • Cracks were noticed after nanoindentation on thin porcelain layers. • Ti6Al4V/porcelain showed a better mechanical behavior than that at CP-Ti/porcelain

Comparison of Superelasticity of Nickel Titanium Orthodontic Arch wires using Mechanical Tensile Testing and Correlating with Electrical Resistivity

Science.gov (United States)

Sivaraj, Aravind

2013-01-01

Background: Application of light and continuous forces for optimum physiological response and least damage to the tooth supporting structures should be the primary aim of the orthodontist. Nickel titanium alloys with the properties of excellent spring back, super elasticity and wide range of action is one of the natural choices for the clinicians to achieve this goal. In recent periods, various wire manufacturers have come with a variety of wires exhibiting different properties. It is the duty of the clinician to select appropriate wires during various stages of treatment for excellent results. For achieving this evaluation of the properties of these wires is essential. Materials & Methods: This study is focussed on evaluating the super elastic property of eight groups of austenite active nickel titanium wires. Eight groups of archwires bought from eight different manufacturers were studied. These wires were tested through mechanical tensile testing and electrical resistivity methods. Results: Unloading curves were carefully assessed for superelastic behaviour on deactivation. Rankings of the wires tested were based primarily upon the unloading curve’s slope Conclusion: Ortho organisers wires ranked first and superior, followed by American Orthodontics and Ormco A wires. Morelli and GAClowland NiTi wires were ranked last. It can be concluded that the performance of these wires based on rankings should be further evaluated by clinical studies. How to cite this article: Sivaraj A. Comparison of Superelasticity of Nickel Titanium Orthodontic Arch wires using Mechanical Tensile Testing and Correlating with Electrical Resistivity. J Int Oral Health 2013; 5(3):1-12. PMID:24155596

Insertion torque recordings for the diagnosis of contact between orthodontic mini-implants and dental roots: a systematic review

NARCIS (Netherlands)

Meursinge Reynders, Reint; Ladu, Luisa; Ronchi, Laura; Di Girolamo, Nicola; de Lange, Jan; Roberts, Nia; Plüddemann, Annette

2016-01-01

Most orthodontic mini-implants (OMIs) are inserted between dental roots. The prevalence of contacting these structures is high. Such contacts can cause permanent root damage and implant instability. Increased torque levels during implant insertion (the index test) could be a more accurate and

Antimicrobial Effect of Nano-Zinc Oxide and Nano-Chitosan Particles in Dental Composite Used in Orthodontics

Directory of Open Access Journals (Sweden)

AmirHossein Mirhashemi

2015-10-01

Full Text Available Background: Incidence of  white  spots due  to  demineralization of  enamel  and  gingival problems  is  an  unacceptable  result  of  orthodontic  treatment.  Plaque  accumulation  and bacterial biofilm growth are responsible for these phenomena. The resin-based dental composites used as bonding agents in orthodontics play a major role in mentioned problems. As recent researches assert the antimicrobial effects of chitosan (CS and zinc oxide (ZnO nanoparticles  (NPs,  it  seems  that  adding  these  nanoparticles  to  the  composite  can  be beneficial in reducing the number and function of microorganisms. The aim of this study was to  evaluate  the  antimicrobial  effects  of  ZnO-NP  and  CS-NP-containing  orthodontic composite.Methods: Antibacterial effectiveness of ZnO-NPs and CS-NPs was assessed in four groups against Streptococcus mutans, Streptococcus sanguis and Lactobacillus acidophilus grown both planktonic and as a biofilm on composites. One group as the unmodified control group and  three  groups  consisting  of  three  different  concentrations of  ZnO-NPs  and  CS-NPs mixture: 1%, 5% and 10% (1:1 w/w. 108 CFU/ml microorganism suspensions were provided with spectrophotometer. Biofilm formation was quantified by viable counts. Disc agar diffusion (DAD test was carried out to determine antimicrobial effects of nanoparticles by measuring the inhibition diameter on brain heart infusion agar plates. Finally,viable counts of microorganisms on days 3, 15 and 30 were collected for the antimicrobial effects of eluted components from composite discs.Results: In biofilm formation test, a reduction in bacterial counts was observed with 10% nanoparticle-containing composites compared with their unmodified counterpart. In the DAD test only 10% nanoparticle-containing specimens showed statistically significant inhibition. The only noticeable datain eluted component test was on day 30 for 10

Orthodontic treatment need of 9, 12 and 15 year-old children according to the Index of Orthodontic Treatment Need and the Dental Aesthetic Index.

Science.gov (United States)

Boronat-Catalá, Montserrat; Bellot-Arcís, Carlos; Montiel-Company, José María; Catalá-Pizarro, Montserrat; Almerich-Silla, José Manuel

2016-06-01

To assess the differences in occlusal features in three cohorts at 9, 12 and 15 years of age, and compare orthodontic treatment need measured by the Dental Aesthetic Index (DAI) and Index of Orthodontic Treatment Need (IOTN). Cross-sectional study. School of Dentistry, University of Valencia. A total of 1086 children: 321 aged 9, 397 aged 12 and 368 aged 15. Children were examined to measure their orthodontic treatment need according to IOTN and DAI. The main outcome measure was orthodontic treatment need according to the DAI and IOTN indices. Overbite and inter-incisal diastema were the occlusal features that presented significant differences between the three groups, diminishing with age. Treatment need according to the IOTN was 15.4% at 9 years, 20.9% at 12 years and 12.8% at 15 years. Treatment need according to DAI was 44.8% at 9 years, 21.7% at 12 years and 14.1% at 15 years. The diagnostic agreement between the two indices on the treatment need by age group was very low at 9 years (Kappa 0.18) and moderate at 12 and 15 years (Kappa 0.451 and 0.405, respectively). Orthodontic treatment need is greater in the mixed dentition and falls slightly as the child grows. The greatest variation in results between 9 and 15 years were found in relation to the DAI, which is consequently not recommended for use in the mixed dentition.

21 CFR 872.5470 - Orthodontic plastic bracket.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Orthodontic plastic bracket. 872.5470 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5470 Orthodontic plastic bracket. (a) Identification. An orthodontic plastic bracket is a plastic device intended to be bonded to a tooth to apply...

Mechanodynamical analysis of nickel-titanium alloys for orthodontics application

International Nuclear Information System (INIS)

Arruda, Carlos do Canto

2002-01-01

Nickel-titanium alloys may coexist in more than one crystalline structure. There is a high temperature phase, austenite, and a low temperature phase, martensite. The metallurgical basis for the superelasticity and the shape memory effect relies in the ability of these alloys to transform easily from one phase to another. There are three essential factors for the orthodontist to understand nickel-titanium alloys behaviour: stress; deflection; and temperature. These three factors are related to each other by the stress-deflection, stress-temperature and deflection-temperature diagrams. This work was undertaken with the objective to analyse commercial nickel-titanium alloys for orthodontics application, using the dynamical mechanical analyser - DMA. Four NiTi 0,017 X 0,025'' archwires were studied. The archwires were Copper NiTi 35 deg C (Ormco), Neo Sentalloy F200 (GAC), Nitinol Superelastic (Unitek) and NiTi (GAC). The different mechanodynamical properties such as elasticity and damping moduli were evaluated. Each commercial material was evaluated with and without a 1 N static force, aiming to evaluate phase transition temperature variation with stress. The austenitic to martensitic phase ratio, for the experiments without static force, was in the range of 1.59 to 1.85. For the 1 N static force tests the austenitic to martensitic phase ratio, ranged from 1.28 to 1.57 due to the higher martensite elasticity modulus. With elastic modulus variation with temperature behaviour, the orthodontist has the knowledge of the force variation applied in the tooth in relation to the oral cavity temperature change, for nickel-titanium alloys that undergo phase transformation. The damping capacity of the studied alloys depends on the materials state: martensitic phase; austenitic phase or during phase transformation. The martensitic phase shows higher dumping capacity. During phase transformation, an internal friction peak may be observed for the CuNiTi 35 deg C and Neo Sentalloy F

[Effect of body image in adolescent orthodontic treatment].

Science.gov (United States)

Minghui, Peng; Jing, Kang; Xiao, Deng

2017-10-01

This study was designed to probe the psychological factors adolescent orthodontic patients, the role of body image and self-esteem in the whole process of orthodontic treatment and the impact on the efficacy and satisfaction of orthodontic. Five hundred and twenty-eight patients were selected in this study. The Aesthetic Component of the Index of Orthodontic Treatment Need (IOTN-AC) , Rosenberg Self-Esteem Scale (SES), Negative Physical Self-General (NPS-G) and other body analysis scale study after orthodontic lasted 18-24 months were used to investigate the role of body image in adolescent orthodontic treatment. Esthetic evaluation of patients teeth after correction had been significantly improved, patient self-evaluation difference IOTN-AC doctor evaluation, Psychosocial Impact of Dental Aesthetics Questionnaire-tooth confidence, aesthetic concerns, psychological impact and social function were significantly improved. The improvement of the dental aesthetics component (T2 when doctors evaluate IOTN-AC) was positively correlated with the evaluation of the efficacy, and was significantly negatively correlated with the negative emotions of patients at baseline. Negative body image-dental dissatisfied-cognitive component and the affective component, the overall negative body image and negative emotions can predict patient satisfaction with treatment efficacy. Orthodontic treatment not only improves the self-aesthetic evaluation of adolescent patients, but also has a positive effect on the mental health of adolescent patients.

Orthodontic buccal tooth movement by nickel-free titanium-based shape memory and superelastic alloy wire.

Science.gov (United States)

Suzuki, Akihiro; Kanetaka, Hiroyasu; Shimizu, Yoshinaka; Tomizuka, Ryo; Hosoda, Hideki; Miyazaki, Shuichi; Okuno, Osamu; Igarashi, Kaoru; Mitani, Hideo

2006-11-01

To examine the mechanical properties and the usefulness of titanium-niobium-aluminum (Ti-Nb-Al) wire in orthodontic tooth movement as compared with nickel-titanium (Ni-Ti) wire. The load deflection of expansion springs was gauged with an original jig. The gradient of the superelastic region was measured during the unloading process. Expansion springs comprising the two types of alloy wires were applied to upper first molars of rats. The distance between the first molars was measured with micrometer calipers. The force magnitude of the Ti-Nb-Al expansion spring was lower than that of the Ni-Ti expansion spring over the entire deflection range. The initial force magnitude and the gradient in the superelastic region of the Ti-Nb-Al expansion springs were half those of the Ni-Ti expansion springs. Thus, Ti-Nb-Al expansion springs generated lighter and more continuous force. Tooth movement in the Ni-Ti group proceeded in a stepwise fashion. On the other hand, tooth movement in the Ti-Nb-Al group showed relatively smooth and continuous progression. At 17 days after insertion of expansion springs, there were no significant differences between the Ti-Nb-Al and Ni-Ti groups in the amount of tooth movement. These results indicate that Ti-Nb-Al wire has excellent mechanical properties for smooth, continuous tooth movement and suggest that Ti-Nb-Al wire may be used as a practical nickel-free shape memory and superelastic alloy wire for orthodontic treatment as a substitute for Ni-Ti wire.

Clinicians' Choices in Selecting Orthodontic Archwires

Directory of Open Access Journals (Sweden)

Silvia-Izabella Pop

2013-08-01

Full Text Available Objective: The aim of this study was to assess the choices made by clinicians in selecting archwires during the initial, intermediate and final stages of orthodontic treatment with fixed appliances. Methods: We carried out a questionnaire-based study at the Orthodontics and Pedodontics Clinic Târgu Mureș, between March 2012 and September 2012. The questionnaires consisted of two parts: the first included questions related to the dimension, alloy used in fabrication, section (round or rectangular and manufacturer of the archwires used by the orthodontists in their orthodontic practice, the second part was concerned with their personal opinion about the physical properties and disadvantages of the archwires. Results: From a total number of 90 distributed questionnaires, 62 were returned. The majority of clinicians are using stainless steel (SS and nickel-titanium alloy (NiTi wires in their fixed orthodontic treatments, very few are using beta-titanium (Beta Ti, copper nickel-titanium (Co- NiTi and esthetic archwires. The preferred dimension seem to be 0.022 inches in the appliance system. Regarding the wire dimensions, 0.014, 0.016 inch wires are mostly used from the round section group and 0.016 × 0.022 inch, 0.017 × 0.025 inch from the rectangular ones. Conclusions: There is a general lack of agreement between the clinicians surveyed regarding the properties of an ideal archwire and the disadvantages of the used wires. The most frequently used alloys seemed to be the SS and NiTi

Direct Metal Laser Sintering Titanium Dental Implants: A Review of the Current Literature

Science.gov (United States)

Mangano, F.; Chambrone, L.; van Noort, R.; Miller, C.; Hatton, P.; Mangano, C.

2014-01-01

Statement of Problem. Direct metal laser sintering (DMLS) is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D) computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs); to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS) was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed. PMID:25525434

Direct metal laser sintering titanium dental implants: a review of the current literature.

Science.gov (United States)

Mangano, F; Chambrone, L; van Noort, R; Miller, C; Hatton, P; Mangano, C

2014-01-01

Statement of Problem. Direct metal laser sintering (DMLS) is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D) computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs); to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS) was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed.

Direct Metal Laser Sintering Titanium Dental Implants: A Review of the Current Literature

Directory of Open Access Journals (Sweden)

F. Mangano

2014-01-01

Full Text Available Statement of Problem. Direct metal laser sintering (DMLS is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs; to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed.

Optimizing Maxillary Aesthetics of a Severe Compromised Tooth through Orthodontic Movement and Dental Implants

Directory of Open Access Journals (Sweden)

Rafael Scaf de Molon

2014-01-01

Full Text Available Treatment of severe compromised tooth in the maxillary anterior area still poses great challenge to the clinicians. Several treatment modalities have been proposed to restore the function and aesthetics in teeth with advanced periodontal disease. The present study aims to report a case of traumatic injury of a left-maxillary central incisor with ridge preservation, orthodontic movement, and implant therapy. A 45-year-old woman underwent the proposed treatment for her left central incisor: basic periodontal therapy, xenogenous bone graft, and guided bone regeneration (GBR. Six months after the graft procedure, orthodontic movement by means of alignment and leveling was made and a coronal displacement of the gingival margin and vertical bone apposition could be observed after 13 months of active movement. Afterwards, a dental implant was placed followed by a connective tissue graft and immediate provisionalization of the crown. In conclusion, orthodontic movement was effective to improve the gingival tissue and alveolar bone prior to implant placement favoring the aesthetic results. Six years postoperatively, the results revealed height and width alveolar bone gain indicating that the treatment proposed was able to restore all the functional and aesthetic parameters.

Evaluation of the new TAMZ titanium alloy for dental cast application.

Science.gov (United States)

Zhang, Y M; Guo, T W; Li, Z C

2000-12-01

To reveal the potential of the new titanium alloy as dental prosthodontic materials. Dental castings of TAMZ alloy were investigated in the casting machine specially designed for titanium. A mesh pattern was used to count the castability value. The mechanical properties were measured by means of a universal testing machine. Optical micrography was done on the exposed cross-section of TAMZ alloy casting. From the surface to the inner part the Knoop hardness in reacted layer of TAMZ alloy casting was measured. The structure and elemental analyses of the reacted layer were made by SEM and element line scanning observation. The castability value (Cv = 98%) and the tensile test (sigma b = 850 Mpa, sigma 0.2 = 575 Mpa, delta = 7.33%) data were collected. The castings microstructure showed main alpha phase and small beta phase. Knoop hardness in the surface reacted layer was greater than that in the inner part. From the SEM and element line scanning observation, there are three different layers in the surface reacted layer of the TAMZ alloy castings, and higher level of element of O, Al, Si and Zr were found in the reacted layer while the Si permeated deeper than others. TAMZ alloy can be accepted as a material for dental alloy in prosthodontics.

[Orthodontic treatment of Class III patients with mandibular asymmetry].

Science.gov (United States)

Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

2008-12-01

To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

Children's orthodontic utilization in the United States: Socioeconomic and surveillance considerations.

Science.gov (United States)

Laniado, Nadia; Oliva, Stephanie; Matthews, Gregory J

2017-11-01

There has been no epidemiologic study of malocclusion prevalence and treatment need in the United States since the Third National Health and Nutrition Examination Survey, conducted from 1988 to 1991. In this descriptive study, the authors sought to estimate orthodontic treatment prevalence by examining a nationally representative survey to assess current pediatric dental and orthodontic utilization. The 2009 and 2013 Medical Expenditure Panel Surveys were used to categorize and compare all types of pediatric dental and orthodontic procedures in children and adolescents up to 20 years old. Descriptive variables included dental insurance, poverty level, and racial/ethnic background. Visits for orthodontic procedures constituted the third largest treatment category (14.5%) and were greatest among the uninsured and higher income populations. Children with public insurance had the fewest orthodontic visits (9.4%). Racial/ethnic disparities were most pronounced among orthodontic visits, with black and Hispanic children receiving the fewest orthodontic procedures (8.89% and 10.56%, respectively). Orthodontic treatment prevalence data suggest that significant disparities exist in orthodontic utilization based on race/ethnicity, poverty level, and insurance status. To establish the burden of malocclusion, describe populations in greatest need of interventions, and craft appropriate programs and policies, an active orthodontic surveillance system is essential. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

X-ray diffraction study of low-temperature phase transformations in nickel-titanium orthodontic wires.

Science.gov (United States)

Iijima, M; Brantley, W A; Guo, W H; Clark, W A T; Yuasa, T; Mizoguchi, I

2008-11-01

Employ conventional X-ray diffraction (XRD) to analyze three clinically important nickel-titanium orthodontic wire alloys over a range of temperatures between 25 and -110 degrees C, for comparison with previous results from temperature-modulated differential scanning calorimetry (TMDSC) studies. The archwires selected were 35 degrees C Copper Ni-Ti (Ormco), Neo Sentalloy (GAC International), and Nitinol SE (3M Unitek). Neo Sentalloy, which exhibits superelastic behavior, is marketed as having shape memory in the oral environment, and Nitinol SE and 35 degrees C Copper Ni-Ti also exhibit superelastic behavior. All archwires had dimensions of 0.016in.x0.022in. (0.41 mm x 0.56 mm). Straight segments cut with a water-cooled diamond saw were placed side-by-side to yield a 1 cm x 1cm test sample of each wire product for XRD analysis (Rint-Ultima(+), Rigaku) over a 2theta range from 30 degrees to 130 degrees and at successive temperatures of 25, -110, -60, -20, 0 and 25 degrees C. The phases revealed by XRD at the different analysis temperatures were in good agreement with those found in previous TMDSC studies of transformations in these alloys, in particular verifying the presence of R-phase at 25 degrees C. Precise comparisons are not possible because of the approximate nature of the transformation temperatures determined by TMDSC and the preferred crystallographic orientation present in the wires. New XRD peaks appear to result from low-temperature transformation in martensite, which a recent transmission electron microscopy (TEM) study has shown to arise from twinning. While XRD is a useful technique to study phases in nickel-titanium orthodontic wires and their transformations as a function of temperature, optimum insight is obtained when XRD analyses are combined with complementary TMDSC and TEM study of the wires.

Satisfaction with Dental Appearance and Attitude toward improving Dental Esthetics among Patients attending a Dental Teaching Center.

Science.gov (United States)

Maghaireh, Ghada A; Alzraikat, Hanan; Taha, Nessrin A

2016-01-01

The aim of this study was to evaluate the factors influencing the satisfaction of dental appearance and attitude toward treatments to improve dental esthetics among patients attending a dental teaching center. A questionnaire was used to collect data of four background variables among 450 patients attended a dental teaching center in the city of Irbid in Jordan. The questionnaire enclosed self-reported questions about the appearance of anterior teeth, received esthetic treatment and desired treatment for improving esthetics. Descriptive, multiple logistic regression and Chi-square tests were used for data analysis (p ≤ 0.05). The 450 participants consisted of (66.2%) male and (33.8%) female. Of these, 69.3% were satisfied with their dental appearance and 58.0% with the color of their teeth. Esthetic restorations were the most received treatment (39.8%) and whitening of teeth was the most desired treatment (55.3%). The patients' satisfaction with dental appearance was influenced by teeth color, crowding and receiving whitening (p < 0.05. r = 0.561, r(2) = 0.315). The most desired esthetic treatments influenced by the satisfaction with dental appearance were esthetic restorations and orthodontics (p < 0.05. r = 0.223, r(2) = 0.05). Significantly more female reported having esthetic restorations and orthodontics (p = 0.008, 0.000) and desired to have orthodontic, crowns or veneers and esthetic restorations (p = 0.000, 0.015, 0.028). Satisfaction with dental appearance was affected by teeth color, feeling teeth are crowded, desire for esthetic restorations and orthodontic treatment. A high percentage of patients were not satisfied with the color of their teeth. Recognizing the factors that affect patients' satisfaction with their present dental appearance and attitude toward treatments to improve dental esthetic can guide clinicians to strategies to improve esthetics.

An update on periodontic-orthodontic interrelationships

OpenAIRE

Dannan, Aous

2010-01-01

Talking about periodontic-orthodontic interrelationships is related primarily to the 1960s, where a generalized increase in salivary bacterial counts, especially Lactobacillus, had been shown after orthodontic band placement. The purpose of this article is to provide the dental practitioner with basic understanding of the interrelationship between periodontics and orthodontics by means of representing classical studies, and, to give an update on this topic by demonstrating the most recent opi...

Review Article: A Review Of Adult Orthodontics – Role Of The ...

African Journals Online (AJOL)

Adjunctive and comprehensive orthodontic treatments are the main types of orthodontic therapy recommended for adult malocclusion. The orthodontic therapy and refer to the specialist appropriately. KEY WORDS: Review, Adult Orthodontics, General Dental Practitioner. Nigerian Journal of Clinical Practice Vol.7(1) 2004: ...

Mechanical equilibrium of forces and moments applied on orthodontic brackets of a dental arch: Correlation with literature data on two and three adjacent teeth.

Science.gov (United States)

Wagner, Delphine; Bolender, Yves; Rémond, Yves; George, Daniel

2017-01-01

Although orthodontics have greatly improved over the years, understanding of its associated biomechanics remains incomplete and is mainly based on two dimensional (2D) mechanical equilibrium and long-time clinical experience. Little experimental information exists in three dimensions (3D) about the forces and moments developed on orthodontic brackets over more than two or three adjacent teeth. We define here a simplified methodology to quantify 3D forces and moments applied on orthodontic brackets fixed on a dental arch and validate our methodology using existing results from the literature by means of simplified hypotheses.

Patterns of third-molar agenesis and associated dental anomalies in an orthodontic population.

Science.gov (United States)

Celikoglu, Mevlut; Bayram, Mehmet; Nur, Metin

2011-12-01

The aim of this study was to investigate the frequency of dental anomalies in orthodontic patients with different patterns of third-molar agenesis, comparing them with patients without third-molar agenesis. A sample of 374 patients with agenesis of at least 1 third molar was divided into 4 groups according to the third-molar agenesis pattern, and a control group of 98 patients without third-molar agenesis was randomly selected from the patient archives. Panoramic radiographs and cast models were used to determine the associated dental anomalies, such as hypodontia, hyperdontia, impaction, dilaceration, microdontia, ectopic eruption, transposition, and transmigration. The Pearson chi-square and Fisher exact tests were used to determine the differences in the distribution of the associated dental anomalies among the groups. The prevalence of agenesis of other teeth (11.2%, n = 42) was significantly greater in our study sample (groups 1-4) than in the control group (group 5) (4.1%, n = 4; P dental anomalies in patients with agenesis of 3 and 4 third molars compared with the control group. Permanent tooth agenesis, microdontia of maxillary lateral incisors, and total dental anomalies are more frequently associated with agenesis of 4 third molars than with the presence of third molars. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Antibacterial Activity of Orthodontic Cement Containing Quaternary Ammonium Polyethylenimine Nanoparticles Adjacent to Orthodontic Brackets

OpenAIRE

Eldad Sharon; Revital Sharabi; Adi Eden; Asher Zabrovsky; Gilad Ben-Gal; Esi Sharon; Yoav Pietrokovski; Yael Houri-Haddad; Nurit Beyth

2018-01-01

Enamel demineralization is a common problem found in patients using orthodontic devices, such as orthodontic braces. It was found that Streptoccocus mutans growth increases adjacent to orthodontic devices, which may result in caries development. Incorporated antibacterial quaternary ammonium polyethylenimine (QPEI) nanoparticles were previously shown to be highly efficacious against various bacteria. Combining antibacterial materials in orthodontic cement may be advantageous to prevent bacter...

Insertion torque recordings for the diagnosis of contact between orthodontic mini implants and dental roots: protocol for a systematic review

NARCIS (Netherlands)

Meursinge Reynders, R.; Ladu, L.; Ronchi, L.; Di Girolama, N.; de Lange, J.; Roberts, N.; Plüddemann, A.

2015-01-01

Background Hitting a dental root during the insertion of orthodontic mini-implants (OMIs) is a common adverse effect of this intervention. This condition can permanently damage these structures and can cause implant instability. Increased torque levels (index test) recorded during the insertion of

Cellular and Molecular Changes in Orthodontic Tooth Movement

Science.gov (United States)

Zainal Ariffin, Shahrul Hisham; Yamamoto, Zulham; Zainol Abidin, lntan Zarina; Megat Abdul Wahab, Rohaya; Zainal Ariffin, Zaidah

2011-01-01

Tooth movement induced by orthodontic treatment can cause sequential reactions involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structures. To better understand the biological processes involved in orthodontic treatment, improve treatment, and reduce adverse side effects, several of these substances have been proposed as biomarkers. Potential biological markers can be collected from different tissue samples, and suitable sampling is important to accurately reflect biological processes. This paper covers the tissue changes that are involved during orthodontic tooth movement such as at compression region (involving osteoblasts), tension region (involving osteoclasts), dental root, and pulp tissues. Besides, the involvement of stem cells and their development towards osteoblasts and osteoclasts during orthodontic treatment have also been explained. Several possible biomarkers representing these biological changes during specific phenomenon, that is, bone remodelling (formation and resorption), inflammation, and root resorption have also been proposed. The knowledge of these biomarkers could be used in accelerating orthodontic treatment. PMID:22125437

Clear aligners in orthodontic treatment.

Science.gov (United States)

Weir, T

2017-03-01

Since the introduction of the Tooth Positioner (TP Orthodontics) in 1944, removable appliances analogous to clear aligners have been employed for mild to moderate orthodontic tooth movements. Clear aligner therapy has been a part of orthodontic practice for decades, but has, particularly since the introduction of Invisalign appliances (Align Technology) in 1998, become an increasingly common addition to the orthodontic armamentarium. An internet search reveals at least 27 different clear aligner products currently on offer for orthodontic treatment. The present paper will highlight the increasing popularity of clear aligner appliances, as well as the clinical scope and the limitations of aligner therapy in general. Further, the paper will outline the differences between the various types of clear aligner products currently available. © 2017 Australian Dental Association.

Unmet dental and orthodontic need of children with special healthcare needs in West Virginia.

Science.gov (United States)

Wiener, R C; Wiener, M A

2012-01-01

Of children aged 0-17 years in the USA, an estimated 11 203 616 (15.1%; 95% CI: 14.8, 15.3) are Children with Special Health Care Needs (CSHCN). The state of West Virginia, the heart of Appalachia, has a land mass which is 97.65% rural with previously identified high overall dental need and oral health disparities. It is home to an estimated 70 609 CSHCN, or 18.5% (95% CI: 17.0, 19.9) of the state's children in 2009-2010. The purpose of this study was to determine the parent/guardian's perceived unmet dental care need of CSHCN in West Virginia. Data from the National Survey of Children with Special Health Care Needs was used to determine prevalence. A telephone survey of 59 941 parents/guardians of CSHCN (1149 from West Virginia) for the dental interview was conducted in 2009-2010. Nationwide, 26.7% (25.9, 27.5) of parents/guardians reported their CSHCN had dental care or orthodontia needs other than preventive care. In West Virginia, the perceived dental care or orthodontia needs other than preventive dental care need was 26.5% (22.2, 30.0). Unmet national dental care need other than preventive dental care was 5.4% (5.0, 5.9) and in West Virginia 5.0% (2.4, 7.5). CSHCN have significant unmet dental needs. Parents/guardians in West Virginia reported similar unmet need compared with national reporting. Policies to address the health care of CSHCN should include dental needs. The clinical implications are that CSHCN have a variety of needs, including orthodontia. The benefits of orthodontic referrals should be considered in treatment planning options for CSHCN.

Orthodontic Consideration in Patients with Beta-Thalassemia Major: Case Report and Literature Review.

Science.gov (United States)

Einy, Shmuel; Hazan-Molina, Hagai; Ben-Barak, Ayelet; Aizenbud, Dror

Beta Thalassemia (βT) patients present a unique facial appearance and specific craniofacial, jaw and dental patterns. Although this anomaly often requires orthodontic management, βT patients have received scant attention in the orthodontic and dental literature over the past 50 years. The aim of this article is to review the characteristic craniofacial and dental manifestation pattern of βT patients and to emphasize their preferred orthodontic management protocol by presenting a βT orthodontic treated patient. A 10 year old patient presented with a complaint of severe esthetic and functional disorders due to her diagnosis of βT. We initiated orthodontic treatment including a combined orthopedic and functional treatment modality to improve facial appearance. Maxillary restraint and increased mandibular size during treatment along with an increase in the vertical dimension were achieved. The patient presented with Angle class I molar relationship, with reduction of the excessive overjet and deep overbite. Orthodontic treatment comprised of maxillary orthopedic treatment directed especially toward premaxilla with light forces, and mandibular modification by functional appliance along with fixed orthodontic treatment is recommended in βT patients.

Iatrogenic orthodontic dental trauma: a case report.

Science.gov (United States)

Gencay, Koray; Tuna, Elif Bahar; Yaman, Duygu; Ozgen, Mehmet; Demirel, Korkud

2013-01-01

Iatrogenic trauma can be defined as any adverse condition in a patient resulting from treatment by a physician or dentist. Orthodontic treatment carries with it the risks of tissue damage and treatment failure. The aim of this article is to present traumatic oral tissue lesions resulting from iatrogenic orthodontic origin with a 2-year follow-up period based on orthodontic intervention followed by periodontal surgery. The management of traumatic injuries is dependent on the severity of the involvement of the periodontal tissues. While, in most cases, the elimination of the offending agent and symptomatic therapy is sufficient, in severe cases, or when the injury resulted in permanent defects, periodontal/regenerative therapy may be necessary. The dentist must be aware of these risks in order to help the patient make a fully informed choice whether to proceed with orthodontic treatment. The skill, experience, and up-to-date knowledge of dentists are the main factors to prevent possible iatrogenic traumas.

Effect of moisture on dental enamel in the interaction of two orthodontic bonding systems.

Science.gov (United States)

Bertoz, André Pinheiro de Magalhães; de Oliveira, Derly Tescaro Narcizo; Gimenez, Carla Maria Melleiro; Briso, André Luiz Fraga; Bertoz, Francisco Antonio; Santos, Eduardo César Almada

2013-01-01

The purpose of this study was to assess by means of scanning electron microscopy (SEM) the remaining adhesive interface after debonding orthodontic attachments bonded to bovine teeth with the use of hydrophilic and hydrophobic primers under different dental substrate moisture conditions. Twenty mandibular incisors were divided into four groups (n = 5). In Group I, bracket bonding was performed with Transbond MIP hydrophilic primer and Transbond XT adhesive paste applied to moist substrate, and in Group II a bonding system comprising Transbond XT hydrophobic primer and adhesive paste was applied to moist substrate. Brackets were bonded to the specimens in Groups III and IV using the same adhesive systems, but on dry dental enamel. The images were qualitatively assessed by SEM. The absence of moisture in etched enamel enabled better interaction between bonding materials and the adamantine structure. The hydrophobic primer achieved the worst micromechanical interlocking results when applied to a moist dental structure, whereas the hydrophilic system proved versatile, yielding acceptable results in moist conditions and excellent interaction in the absence of contamination. The authors assert that the best condition for the application of primers to dental enamel occurs in the absence of moisture.

Prevention and treatment of white spot lesions in orthodontic patients

Directory of Open Access Journals (Sweden)

Maryam Khoroushi

2017-01-01

Full Text Available Decalcification of enamel, appearing as white spot lesions (WSLs, around fixed orthodontic appliances is a major challenge during and after fixed orthodontic treatment by considering the fact that the goal of orthodontic treatment is to enhance facial and dental esthetic appearance. Banded or bonded teeth exhibit a significantly higher rate of WSLs compared to the controls with no braces as fixed appliances and the bonding materials promote retention of biofilms. These lesions are managed in the first step by establishing good oral hygiene habits and prophylaxis with topical fluorides, including high-fluoride toothpastes, fluoride mouthwashes, gels, varnishes, fluoride-containing bonding materials, and elastic ligatures. Recently, other materials and methods have been recommended, including the application of casein phosphopeptides-amorphous calcium phosphate, antiseptics, probiotics, polyols, sealants, laser, tooth bleaching agents, resin infiltration, and microabrasion. This article reviews the currently used methods to manage enamel demineralization during and after orthodontic treatment and the risk factors and preventive measures based on the latest evidence.

Effect of nitriding surface treatment on the corrosion resistance of dental nickel-titanium files in 5.25% sodium hypochlorite solution

Energy Technology Data Exchange (ETDEWEB)

Liu, J.-F. [Department of Dentistry, National Yang-Ming University, Taipei, Taiwan (China); Department of Dentistry, Taichung Veterans General Hospital, Taichung, Taiwan (China); Lin, M.-C. [Department of Dentistry, National Yang-Ming University, Taipei, Taiwan (China); Department of Dental Laboratory Technology, Central Taiwan University of Science and Technology, Taichung, Taiwan (China); Hsu, M.-L. [Department of Dentistry, National Yang-Ming University, Taipei, Taiwan (China); Li, U.-M. [Dental Department, Cardinal Tien Hospital, Hsintien, Taiwan (China); Lin, C.-P. [Department of Dentistry, National Taiwan University, Taipei, Taiwan (China); Tsai, W.-F.; Ai, C.-F. [Institute of Nuclear Energy Research, Atomic Energy Council, Taoyuan, Taiwan (China); Chen, L.-K. [Department of Dentistry, Taipei City Hospital, Taipei, Taiwan (China); Huang, H.-H. [Department of Dentistry, National Yang-Ming University, Taipei, Taiwan (China); Department of Dentistry, Taipei City Hospital, Taipei, Taiwan (China); Institute of Oral Biology, National Yang-Ming University, Taipei, Taiwan (China)], E-mail: hhhuang@ym.edu.tw

2009-05-05

This study investigated the effect of nitriding surface treatment on the corrosion resistance of commercial dental alloy, in the form of helical nickel-titanium (Ni-Ti) files, when treated with 5.25% sodium hypochlorite (NaOCl) solution. The surface of dental helical Ni-Ti files was modified using nitriding treatment at 200 deg. C, 250 deg. C and 300 deg. C in an NH{sub 3}-containing environment. The surface morphology and chemical composition of the Ni-Ti files were analyzed using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), respectively. The corrosion resistance of the Ni-Ti files when treated with a clinical solution of 5.25% NaOCl was evaluated using the linear polarization method and by potentiodynamic polarization curve measurement. The nitriding treatments at different temperatures created titanium nitride (TiN) on the surface of the helical Ni-Ti files. The Ni-Ti files nitrided at 200 deg. C and 250 deg. C showed higher polarization resistance and higher passive film breakdown potential together with a lower passive current than untreated files. The presence of TiN on dental Ni-Ti files significantly increased the corrosion resistance of the files in the presence of 5.25% NaOCl solution.

Effect of nitriding surface treatment on the corrosion resistance of dental nickel-titanium files in 5.25% sodium hypochlorite solution

International Nuclear Information System (INIS)

Liu, J.-F.; Lin, M.-C.; Hsu, M.-L.; Li, U.-M.; Lin, C.-P.; Tsai, W.-F.; Ai, C.-F.; Chen, L.-K.; Huang, H.-H.

2009-01-01

This study investigated the effect of nitriding surface treatment on the corrosion resistance of commercial dental alloy, in the form of helical nickel-titanium (Ni-Ti) files, when treated with 5.25% sodium hypochlorite (NaOCl) solution. The surface of dental helical Ni-Ti files was modified using nitriding treatment at 200 deg. C, 250 deg. C and 300 deg. C in an NH 3 -containing environment. The surface morphology and chemical composition of the Ni-Ti files were analyzed using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), respectively. The corrosion resistance of the Ni-Ti files when treated with a clinical solution of 5.25% NaOCl was evaluated using the linear polarization method and by potentiodynamic polarization curve measurement. The nitriding treatments at different temperatures created titanium nitride (TiN) on the surface of the helical Ni-Ti files. The Ni-Ti files nitrided at 200 deg. C and 250 deg. C showed higher polarization resistance and higher passive film breakdown potential together with a lower passive current than untreated files. The presence of TiN on dental Ni-Ti files significantly increased the corrosion resistance of the files in the presence of 5.25% NaOCl solution.

Insertion torque recordings for the diagnosis of contact between orthodontic mini-implants and dental roots: protocol for a systematic review

NARCIS (Netherlands)

Meursinge Reynders, Reint; Ladu, Luisa; Ronchi, Laura; Di Girolamo, Nicola; de Lange, Jan; Roberts, Nia; Plüddemann, Annette

2015-01-01

Hitting a dental root during the insertion of orthodontic mini-implants (OMIs) is a common adverse effect of this intervention. This condition can permanently damage these structures and can cause implant instability. Increased torque levels (index test) recorded during the insertion of OMIs may

Effect of coating on properties of esthetic orthodontic nickel-titanium wires.

Science.gov (United States)

Iijima, Masahiro; Muguruma, Takeshi; Brantley, William; Choe, Han-Cheol; Nakagaki, Susumu; Alapati, Satish B; Mizoguchi, Itaru

2012-03-01

To determine the effect of coating on the properties of two esthetic orthodontic nickel-titanium wires. Woowa (polymer coating; Dany Harvest) and BioForce High Aesthetic Archwire (metal coating; Dentsply GAC) with cross-section dimensions of 0.016 × 0.022 inches were selected. Noncoated posterior regions of the anterior-coated Woowa and uncoated Sentalloy were used for comparison. Nominal coating compositions were determined by x-ray fluorescence (JSX-3200, JOEL). Cross-sectioned and external surfaces were observed with a scanning electron microscope (SEM; SSX-550, Shimadzu) and an atomic force microscope (SPM-9500J2, Shimadzu). A three-point bending test (12-mm span) was carried out using a universal testing machine (EZ Test, Shimadzu). Hardness and elastic modulus of external and cross-sectioned surfaces were obtained by nanoindentation (ENT-1100a, Elionix; n  =  10). Coatings on Woowa and BioForce High Aesthetic Archwire contained 41% silver and 14% gold, respectively. The coating thickness on Woowa was approximately 10 µm, and the coating thickness on BioForce High Aesthetic Archwire was much smaller. The surfaces of both coated wires were rougher than the noncoated wires. Woowa showed a higher mean unloading force than the noncoated Woowa, although BioForce High Aesthetic Archwire showed a lower mean unloading force than Sentalloy. While cross-sectional surfaces of all wires had similar hardness and elastic modulus, values for the external surface of Woowa were smaller than for the other wires. The coating processes for Woowa and BioForce High Aesthetic Archwire influence bending behavior and surface morphology.

Enhanced M1/M2 macrophage ratio promotes orthodontic root resorption.

Science.gov (United States)

He, D; Kou, X; Luo, Q; Yang, R; Liu, D; Wang, X; Song, Y; Cao, H; Zeng, M; Gan, Y; Zhou, Y

2015-01-01

Mechanical force-induced orthodontic root resorption is a major clinical challenge in orthodontic treatment. Macrophages play an important role in orthodontic root resorption, but the underlying mechanism remains unclear. In this study, we examined the mechanism by which the ratio of M1 to M2 macrophage polarization affects root resorption during orthodontic tooth movement. Root resorption occurred when nickel-titanium coil springs were applied on the upper first molars of rats for 3 to 14 d. Positively stained odontoclasts or osteoclasts with tartrate-resistant acid phosphatase were found in resorption areas. Meanwhile, M1-like macrophages positive for CD68 and inducible nitric oxide synthase (iNOS) persistently accumulated on the compression side of periodontal tissues. In addition, the expressions of the M1 activator interferon-γ and the M1-associated pro-inflammatory cytokine tumor necrosis factor (TNF)-α were upregulated on the compression side of periodontal tissues. When the coil springs were removed at the 14th day after orthodontic force application, root resorption was partially rescued. The number of CD68(+)CD163(+) M2-like macrophages gradually increased on the compression side of periodontal tissues. The levels of M2 activator interleukin (IL)-4 and the M2-associated anti-inflammatory cytokine IL-10 also increased. Systemic injection of the TNF-α inhibitor etanercept or IL-4 attenuated the severity of root resorption and decreased the ratio of M1 to M2 macrophages. These data imply that the balance between M1 and M2 macrophages affects orthodontic root resorption. Root resorption was aggravated by an enhanced M1/M2 ratio but was partially rescued by a reduced M1/M2 ratio. © International & American Associations for Dental Research 2014.

Mechanical properties of a new thermoplastic polymer orthodontic archwire

Energy Technology Data Exchange (ETDEWEB)

Varela, Juan Carlos; Velo, Marcos [Grupo de investigación en Ortodoncia, Facultad de Odontología, Universidad Santiago de Compostela, Santiago de Compostela (Spain); Espinar, Eduardo; Llamas, Jose Maria [Grupo de investigación en Ortodoncia, Facultad de Odontología, Universidad de Sevilla (Spain); Rúperez, Elisa; Manero, Jose Maria [Dept. C. Materiales e Ing. Metalúrgica, Universitat Politècnica de Catalunya, Centre de Recerca Nanoenginyeria, Member of Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (Spain); Javier Gil, F., E-mail: francesc.xavier.gil@upc.edu [Dept. C. Materiales e Ing. Metalúrgica, Universitat Politècnica de Catalunya, Centre de Recerca Nanoenginyeria, Member of Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (Spain)

2014-09-01

A new thermoplastic polymer for orthodontic applications was obtained and extruded into wires with round and rectangular cross sections. We evaluated the potential of new aesthetic archwire: tensile, three point bending, friction and stress relaxation behaviour, and formability characteristics were assessed. Stresses delivered were generally slightly lower than typical beta-titanium and nickel-titanium archwires. The polymer wire has good instantaneous mechanical properties; tensile stress decayed about 2% over 2 h depending on the initial stress relaxation for up to 120 h. High formability allowed shape bending similar to that associated with stainless steel wires. The friction coefficients were lower than the metallic conventional archwires improving the slipping with the brackets. This new polymer could be a good candidate for aesthetic orthodontic archwires. - Highlights: • A new thermoplastic polymer for orthodontic applications was obtained. • This polymer could be a good candidate for aesthetic orthodontic archwires. • The polymer has good mechanical properties as orthodontic wire coating. • The friction coefficients were lower than the metallic archwires improving the slipping with the brackets. • High formability allowed shape bending similar to that associated with stainless steel wires.

Mechanical properties of a new thermoplastic polymer orthodontic archwire

International Nuclear Information System (INIS)

Varela, Juan Carlos; Velo, Marcos; Espinar, Eduardo; Llamas, Jose Maria; Rúperez, Elisa; Manero, Jose Maria; Javier Gil, F.

2014-01-01

A new thermoplastic polymer for orthodontic applications was obtained and extruded into wires with round and rectangular cross sections. We evaluated the potential of new aesthetic archwire: tensile, three point bending, friction and stress relaxation behaviour, and formability characteristics were assessed. Stresses delivered were generally slightly lower than typical beta-titanium and nickel-titanium archwires. The polymer wire has good instantaneous mechanical properties; tensile stress decayed about 2% over 2 h depending on the initial stress relaxation for up to 120 h. High formability allowed shape bending similar to that associated with stainless steel wires. The friction coefficients were lower than the metallic conventional archwires improving the slipping with the brackets. This new polymer could be a good candidate for aesthetic orthodontic archwires. - Highlights: • A new thermoplastic polymer for orthodontic applications was obtained. • This polymer could be a good candidate for aesthetic orthodontic archwires. • The polymer has good mechanical properties as orthodontic wire coating. • The friction coefficients were lower than the metallic archwires improving the slipping with the brackets. • High formability allowed shape bending similar to that associated with stainless steel wires

The prevalence of malocclusion and orthodontic treatment needs in school going children of Nalagarh, Himachal Pradesh, India

Directory of Open Access Journals (Sweden)

Sarabjeet Singh

2016-01-01

Conclusions: There seems a discrepancy in the proportion of children needing orthodontic treatment on esthetic and dental health grounds. This study provides baseline data on the need and demand for orthodontic treatment among the sample which is important for planning public orthodontic and dental services.

Perception of orthodontic treatment need among Swedish children, adolescents and young adults.

Science.gov (United States)

Salih, Firas Nafi; Lindsten, Rune; Bågesund, Mats

2017-08-01

Perceptions of orthodontic treatment need and perceptions of dental aesthetics was investigated among subjects ages 10, 15 and 19. A total of 489 subjects completed a questionnaire after inspecting 10 photographs in the Aesthetic Component scale of the Index of Orthodontic Treatment Need to (i) reveal the lower limit for orthodontic treatment need and (ii) rate their dental aesthetics by selecting the most similar photo. The mean lower limit for orthodontic treatment need was significantly higher (and closer to literature-based standards) among subjects, age 10 (4.2 ± 1.5), than among subjects, age 15 (3.6 ± 1.2) (p = .0009), and subjects, age 19 (3.5 ± 1.2) (p = .00002). Among subjects ages 15 and 19, the lower limit for orthodontic treatment need was lower in groups with (i) self-perceived orthodontic treatment need (p = .002 and .001, respectively) and (ii) previous orthodontic treatment (p = .005 and .035, respectively). Self-perceived orthodontic treatment need was present in more than one-third of subjects, age 19, who had previously received orthodontic treatment. Subjects of foreign origin reported that their dental aesthetics were worse (p = .002) and those same subjects, age 19, set the lower limit for orthodontic treatment lower (p = .047) than Swedes, age 19. The lower limit for orthodontic treatment need among subjects, age 10, was higher - compared to subjects, ages 15 and 19 - and closer to literature-based standards. Subjects with self-perceived orthodontic treatment need, subjects with previous orthodontic treatment, and subjects age 19 of foreign origin, have higher aesthetic demands.

Endodontic Shaping Performance Using Nickel–Titanium Hand and Motor ProTaper Systems by Novice Dental Students

OpenAIRE

Tu, Ming-Gene; Chen, San-Yue; Huang, Heng-Li; Tsai, Chi-Cheng

2008-01-01

Preparing a continuous tapering conical shape and maintaining the original shape of a canal are obligatory in root canal preparation. The purpose of this study was to compare the shaping performance in simulated curved canal resin blocks of the same novice dental students using hand-prepared and engine-driven nickel–titanium (NiTi) rotary ProTaper instruments in an endodontic laboratory class. Methods: Twenty-three fourth-year dental students attending China Medical University Dental Schoo...

Clinical evidence on titanium-zirconium dental implants: a systematic review and meta-analysis.

Science.gov (United States)

Altuna, P; Lucas-Taulé, E; Gargallo-Albiol, J; Figueras-Álvarez, O; Hernández-Alfaro, F; Nart, J

2016-07-01

The use of titanium implants is well documented and they have high survival and success rates. However, when used as reduced-diameter implants, the risk of fracture is increased. Narrow diameter implants (NDIs) of titanium-zirconium (Ti-Zr) alloy have recently been developed (Roxolid; Institut Straumann AG). Ti-Zr alloys (two highly biocompatible materials) demonstrate higher tensile strength than commercially pure titanium. The aim of this systematic review was to summarize the existing clinical evidence on dental NDIs made from Ti-Zr. A systematic literature search was performed using the Medline database to find relevant articles on clinical studies published in the English language up to December 2014. Nine clinical studies using Ti-Zr implants were identified. Overall, 607 patients received 922 implants. The mean marginal bone loss was 0.36±0.06mm after 1 year and 0.41±0.09mm after 2 years. The follow-up period ranged from 3 to 36 months. Mean survival and success rates were 98.4% and 97.8% at 1 year after implant placement and 97.7% and 97.3% at 2 years. Narrow diameter Ti-Zr dental implants show survival and success rates comparable to regular diameter titanium implants (>95%) in the short term. Long-term follow-up clinical data are needed to confirm the excellent clinical performance of these implants. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Dental anomalies: prevalence and associations between them in a large sample of non-orthodontic subjects, a cross-sectional study.

Science.gov (United States)

Laganà, G; Venza, N; Borzabadi-Farahani, A; Fabi, F; Danesi, C; Cozza, P

2017-03-11

To analyze the prevalence and associations between dental anomalies detectable on panoramic radiographs in a sample of non-orthodontic growing subjects. For this cross-sectional study, digital panoramic radiographs of 5005 subjects were initially screened from a single radiographic center in Rome. Inclusion criteria were: subjects who were aged 8-12 years, Caucasian, and had good diagnostic quality radiographs. Syndromic subjects, those with craniofacial malformation, or orthodontic patients were excluded and this led to a sample of 4706 subjects [mean (SD) age = 9.6 (1.2) years, 2366 males and 2340 females]. Sample was subsequently divided into four subgroups (8, 9, 10, and 11-12 year-old groups). Two operators examined panoramic radiographs to observe the presence of common dental anomalies. The prevalence and associations between dental anomalies were also investigated. The overall prevalence of dental anomalies was 20.9%. Approximately, 17.9% showed only one anomaly, 2.7% two anomalies, while only 0.3% had more than two anomalies. The most frequent anomalies were the displacement of maxillary canine (7.5%), hypodontia (7.1%), impacted teeth (3.9%), tooth ankylosis (2.8%), and tooth transposition (1.4%). The lower right second premolar was the most frequent missing teeth; 3.7% had only one tooth agenesis, and 0.08% had six or more missing tooth (Oligodontia). Mesiodens was the most common type of supernumerary tooth (0.66%). Two subjects had taurodontic tooth (0.04%). Tooth transpositions and displacement of maxillary canine were seen in 1.4 and 7.5%, retrospectively (approximately 69 and 58% were in the 8 and 9 year-old groups, retrospectively). Significant associations were detected between the different dental anomalies (P dental anomalies and provide further evidences to support common etiological factors.

Adult orthodontics: a quality assessment of Internet information.

Science.gov (United States)

McMorrow, Siobhán Mary; Millett, Declan T

2016-09-01

This study evaluated the quality, reliability and readability of information on the Internet on adult orthodontics. A quality assessment of adult orthodontic websites. Postgraduate Orthodontic Unit, Cork University Dental School and Hospital, Cork, Ireland. An Internet search using three search engines (Google, Yahoo and Bing) was conducted using the terms ('adult orthodontics' and 'adult braces'). The first 50 websites from each engine and under each search term were screened and exclusion criteria applied. Included websites were then assessed for quality using four methods: the HON seal, JAMA benchmarks, the DISCERN instrument and the LIDA tool. Readability of included websites was assessed using the Flesch Reading Ease Score (FRES). Only 13 websites met the inclusion criteria. Most were of US origin (n = 8; 61%). The authors of the websites were dentists (n = 5; 39%), professional organizations (n = 2; 15%), past patients (n = 2; 15%) and unspecified (n = 4; 31%). Only 1 website displayed the HON seal and three websites contained all JAMA benchmarks. The mean overall score for DISCERN was 3.9/5 and the mean total LIDA score was 115/144. The average FRES score was 63.1/100. The number of informative websites on adult orthodontics is low and these are of moderate quality. More accurate, high-quality Internet resources are required on adult orthodontics. Recommendations are made as to how this may be achieved.

Digital dental surface registration with laser scanner for orthodontics set-up planning

Science.gov (United States)

Alcaniz-Raya, Mariano L.; Albalat, Salvador E.; Grau Colomer, Vincente; Monserrat, Carlos A.

1997-05-01

We present an optical measuring system based on laser structured light suitable for its diary use in orthodontics clinics that fit four main requirements: (1) to avoid use of stone models, (2) to automatically discriminate geometric points belonging to teeth and gum, (3) to automatically calculate diagnostic parameters used by orthodontists, (4) to make use of low cost and easy to use technology for future commercial use. Proposed technique is based in the use of hydrocolloids mould used by orthodontists for stone model obtention. These mould of the inside of patient's mouth are composed of very fluent materials like alginate or hydrocolloids that reveal fine details of dental anatomy. Alginate mould are both very easy to obtain and very low costly. Once captured, alginate moulds are digitized by mean of a newly developed and patented 3D dental scanner. Developed scanner is based in the optical triangulation method based in the projection of a laser line on the alginate mould surface. Line deformation gives uncalibrated shape information. Relative linear movements of the mould with respect to the sensor head gives more sections thus obtaining a full 3D uncalibrated dentition model. Developed device makes use of redundant CCD in the sensor head and servocontrolled linear axis for mould movement. Last step is calibration to get a real and precise X, Y, Z image. All the process is done automatically. The scanner has been specially adapted for 3D dental anatomy capturing in order to fulfill specific requirements such as: scanning time, accuracy, security and correct acquisition of 'hidden points' in alginate mould. Measurement realized on phantoms with known geometry quite similar to dental anatomy present errors less than 0,1 mm. Scanning of global dental anatomy is 2 minutes, and generation of 3D graphics of dental cast takes approximately 30 seconds in a Pentium-based PC.

Treatment outcomes in 4 modes of orthodontic practice.

Science.gov (United States)

Poulton, Donald; Vlaskalic, Vicki; Baumrind, Sheldon

2005-03-01

This study is a continuation of a previously published report on the outcome of orthodontic treatment provided in offices representing different modes of practice. The sample consisted of duplicate pretreatment (T1) and posttreatment (T2) dental casts of 348 patients from traditional private orthodontic practices (5 offices, 134 patients), company-owned practices (5 offices, 107 patients), offices associated with practice-management organizations (2 offices, 60 patients), and general dental practices (2 offices, 47 patients). Methods were used to obtain random, representative samples from each office, starting with lists of patients who were treated consecutively with full fixed orthodontic appliances. The dental casts were measured by 2 independent judges who used the unweighted PAR score. Good interjudge agreement was shown on the initial casts, but the agreement was not as strong on the final casts. The measurements showed that treatment outcomes were generally satisfactory, although some significant differences between offices and management modes were shown.

Macrophage proinflammatory response to the titanium alloy equipment in dental implantation.

Science.gov (United States)

Chen, X; Li, H S; Yin, Y; Feng, Y; Tan, X W

2015-08-07

Titanium alloy and stainless steel (SS) had been widely used as dental implant materials because of their affinity with epithelial tissue and connective tissue, and good physical, chemical, biological, mechanical properties and processability. We compared the effects of titanium alloy and SS on macrophage cytokine expression as well as their biocompatibility. Mouse macrophage RAW264.7 cells were cultured on titanium alloy and SS surfaces. Cells were counted by scanning electron microscopy. A nitride oxide kit was used to detect released nitric oxide by macrophages on the different materials. An enzyme linked immunosorbent assay was used to detect monocyte chemoattractant protein-1 levels. Scanning electron microscopy revealed fewer macrophages on the surface of titanium alloy (48.2 ± 6.4 x 10(3) cells/cm(2)) than on SS (135 ± 7.3 x 10(3) cells/cm(2)). The nitric oxide content stimulated by titanium alloy was 22.5 mM, which was lower than that stimulated by SS (26.8 mM), but the difference was not statistically significant (P = 0.07). The level of monocyte chemoattractant protein-1 released was significantly higher in the SS group (OD value = 0.128) than in the titanium alloy group (OD value = 0.081) (P = 0.024). The transforming growth factor-b1 mRNA expression levels in macrophages after stimulation by titanium alloy for 12 and 36 h were significantly higher than that after stimulation by SS (P = 0.31 and 0.25, respectively). Macrophages participate in the inflammatory response by regulating cytokines such as nitric oxide, monocyte chemoattractant protein-1, and transforming growth factor-b1. There were fewer macrophages and lower inflammation on the titanium alloy surface than on the SS surface. Titanium alloy materials exhibited better biological compatibility than did SS.

Influence of noble metals alloying additions on the corrosion behaviour of titanium in a fluoride-containing environment.

Science.gov (United States)

Rosalbino, F; Delsante, S; Borzone, G; Scavino, G

2012-05-01

Titanium alloys exhibit excellent corrosion resistance in most aqueous media due to the formation of a stable oxide film, and some of these alloys (particularly Ti-6Al-7Nb) have been chosen for surgical and odontological implants for their resistance and biocompatibility. Treatment with fluorides (F(-)) is known to be the main method for preventing plaque formation and dental caries. Toothpastes, mouthwashes, and prophylactic gels can contain from 200 to 20,000 ppm F(-) and can affect the corrosion behaviour of titanium alloy devices present in the oral cavity. In this work, the electrochemical corrosion behaviour of Ti-1M alloys (M = Ag, Au, Pd, Pt) was assessed in artificial saliva of pH = 3.0 containing 910 ppm F(-) (0.05 M NaF) through open circuit potential, E(OC), and electrochemical impedance spectroscopy (EIS) measurements. The corrosion behaviour of the Ti-6Al-7Nb commercial alloy was also evaluated for comparison. E (OC) measurements show an active behaviour for all the titanium alloys in fluoridated acidified saliva due to the presence of significant concentrations of HF and HF(2) (-) species that dissolve the spontaneous air-formed oxide film giving rise to surface activation. However, an increase in stability of the passive oxide layer and consequently a decrease in surface activation is observed for the Ti-1M alloys. This behaviour is confirmed by EIS measurements. In fact, the Ti-6Al-7Nb alloy exhibits lower impedance values as compared with Ti-1M alloys, the highest values being measured for the Ti-1Au alloy. The experimental results show that the corrosion resistance of the studied Ti-1M alloys is similar to or better than that of Ti-6Al-7Nb alloy currently used as biomaterial, suggesting their potential for dental applications.

Plaque, caries level and oral hygiene habits in young patients receiving orthodontic treatment

DEFF Research Database (Denmark)

Martignon, S; Ekstrand, K R; Lemos, M I

2010-01-01

To assess plaque, caries, and oral hygiene habits amongst patients receiving fixed-orthodontic treatment at the Dental-Clinic, Universidad-El-Bosque, Bogotá, Colombia.......To assess plaque, caries, and oral hygiene habits amongst patients receiving fixed-orthodontic treatment at the Dental-Clinic, Universidad-El-Bosque, Bogotá, Colombia....

Early orthognathic surgery with three-dimensional image simulation during presurgical orthodontics in adults.

Science.gov (United States)

Kang, Sang-Hoon; Kim, Moon-Key; Park, Sun-Yeon; Lee, Ji-Yeon; Park, Wonse; Lee, Sang-Hwy

2011-03-01

To correct dentofacial deformities, three-dimensional skeletal analysis and computerized orthognathic surgery simulation are used to facilitate accurate diagnoses and surgical plans. Computed tomography imaging of dental occlusion can inform three-dimensional facial analyses and orthognathic surgical simulations. Furthermore, three-dimensional laser scans of a cast model of the predetermined postoperative dental occlusion can be used to increase the accuracy of the preoperative surgical simulation. In this study, we prepared cast models of planned postoperative dental occlusions from 12 patients diagnosed with skeletal class III malocclusions with mandibular prognathism and facial asymmetry that had planned to undergo bimaxillary orthognathic surgery during preoperative orthodontic treatment. The data from three-dimensional laser scans of the cast models were used in three-dimensional surgical simulations. Early orthognathic surgeries were performed based on three-dimensional image simulations using the cast images in several presurgical orthodontic states in which teeth alignment, leveling, and space closure were incomplete. After postoperative orthodontic treatments, intraoral examinations revealed that no patient had a posterior open bite or space. The two-dimensional and three-dimensional skeletal analyses showed that no mandibular deviations occurred between the immediate and final postoperative states of orthodontic treatment. These results showed that early orthognathic surgery with three-dimensional computerized simulations based on cast models of predetermined postoperative dental occlusions could provide early correction of facial deformities and improved efficacy of preoperative orthodontic treatment. This approach can reduce the decompensation treatment period of the presurgical orthodontics and contribute to efficient postoperative orthodontic treatments.

Retrospective study to determine the change in referral pattern to St George's Hospital Orthodontic Department before and after the 2006 NHS Dental Contract changes.

Science.gov (United States)

Izadi, Maryam; Gill, Daljit S; Naini, Farhad B

2010-07-01

The aim of this study was to determine the possible effects of the 2006 National Health Service General Dental Services contract changes on the referral pattern to the orthodontic department at St George's Hospital, South West London. This study was carried out on a retrospective basis. The notes of consecutive patients referred between 1st May and 30th September in 2005 and 2008 were assessed, and the patient's Index of Orthodontic Treatment Need (IOTN) and the source of referral noted. The total numbers of referrals increased from 260 in 2005 to 405 in 2008. The number of referrals from general dental practitioners decreased slightly from 165 to 156, as did the numbers of referrals from other sources, such as tertiary referrals. The number of referrals made by specialist practitioners increased from 41 in 2005 to 207 in 2008, representing an increase from 16% to 51% of overall referrals. Overall, the number of patients being referred with an IOTN dental health component grade of 5 increased from 27% to 55%. The increase in referrals from specialist practitioners may be partly due to the changes brought to the commissioning of orthodontic services for specialist practitioners. Overall, the number of cases being referred with IOTN grades 4 and 5 remains high at St George's Hospital, indicating that appropriate referrals are being made.

Objectification of Orthodontic Treatment Needs: Does the Classification of Malocclusions or a History of Orthodontic Treatment Matter?

Science.gov (United States)

Kozanecka, Anna; Sarul, Michał; Kawala, Beata; Antoszewska-Smith, Joanna

2016-01-01

Orthodontic classifications make it possible to give an accurate diagnosis but do not indicate an objective orthodontic treatment need. In order to evaluate the need for treatment, it is necessary to use such indicators as the IOTN. The aim of the study was to find (i) relationships between individual diagnosis and objective recommendations for treatment and (ii) an answer to the question whether and which occlusal anomalies play an important role in the objectification of treatment needs. Two hundred three 18-year-old adolescents (104 girls, 99 boys) were examined. In order to recognize occlusal anomalies, the classifications proposed by Orlik-Grzybowska and Ackerman-Proffit were used. The occlusal anomalies were divided into three categories: belonging to both classifications, typical of OrlikGrzybowska classification and typical of Ackerman-Proffit classification. In order to determine the objective need for orthodontic treatment, the Dental Health Component (DHC) of the IOTN was used. The occurrence of the following malocclusions covered by both classifications, namely abnormal overjet, crossbite and Angle's class, had a statistically significant (p 3). As for the classification by Orlik-Grzybowska, dental malpositions and canine class significantly affected the need for orthodontic treatment, while in the case of the Ackerman-Proffit scheme, it was asymmetry and crowding. There was no statistically significant correlation between past orthodontic treatment and current orthodontic treatment need. IOTN may be affected by a greater number of occlusal anomalies than it was assumed. Orthodontic treatment received in the past slightly reduces the need for treatment in 18-year-olds.

Surface analysis of titanium dental implants with different topographies

Directory of Open Access Journals (Sweden)

Silva M.H. Prado da

2000-01-01

Full Text Available Cylindrical dental implants made of commercially pure titanium were analysed in four different surface finishes: as-machined, Al2O3 blasted with Al2O3 particles, plasma-sprayed with titanium beads and electrolytically coated with hydroxyapatite. Scanning electron microscopy (SEM with Energy Dispersive X-ray Analysis (EDX revealed the topography of the surfaces and provided qualitative results of the chemical composition of the different implants. X-ray Photoelectron Spectroscopy (XPS was used to perform chemical analysis on the surface of the implants while Laser Scanning Confocal Microscopy (LSM produced topographic maps of the analysed surfaces. Optical Profilometry was used to quantitatively characterise the level of roughness of the surfaces. The implant that was plasma-sprayed and the hydroxyapatite coated implant showed the roughest surface, followed by the implant blasted with alumina and the as-machined implant. Some remnant contamination from the processes of blasting, coating and cleaning was detected by XPS.

Miniscrew implant applications in contemporary orthodontics

Directory of Open Access Journals (Sweden)

Hong-Po Chang

2014-03-01

Full Text Available The need for orthodontic treatment modalities that provide maximal anchorage control but with minimal patient compliance requirements has led to the development of implant-assisted orthodontics and dentofacial orthopedics. Skeletal anchorage with miniscrew implants has no patient compliance requirements and has been widely incorporated in orthodontic practice. Miniscrew implants are now routinely used as anchorage devices in orthodontic treatment. This review summarizes recent data regarding the interpretation of bone data (i.e., bone quantity and quality obtained by preoperative diagnostic computed tomography (CT or by cone-beam computed tomography (CBCT prior to miniscrew implant placement. Such data are essential when selecting appropriate sites for miniscrew implant placement. Bone characteristics that are indications and contraindications for treatment with miniscrew implants are discussed. Additionally, bicortical orthodontic skeletal anchorage, risks associated with miniscrew implant failure, and miniscrew implants for nonsurgical correction of occlusal cant or vertical excess are reviewed. Finally, implant stability is compared between titanium alloy and stainless steel miniscrew implants.

Fluoride influences nickel-titanium orthodontic wires′ surface texture and friction resistance

Directory of Open Access Journals (Sweden)

Mona Aly Abbassy

2016-01-01

Full Text Available Objectives: The aim of this study was to investigate the effects exerted by the acidulated fluoride gel on stainless steel and nickel-titanium (Ni-Ti orthodontic wires. Materials and Methods: Sixty stainless steel and Ni-Ti orthodontic archwires were distributed into forty archwires used for in vitro study and twenty for in situ study. Fluoride was applied for 1 h in the in vitro experiment while it was applied for 5 min in the in situ experiment. The friction resistance of all wires with ceramic brackets before/after topical fluoride application was measured using a universal testing machine at 1 min intervals of moving wire. Moreover, surface properties of the tested wires before/after fluoride application and before/after friction test were examined by a scanning electron microscope (SEM. Dunnett′s t-test was used to compare frictional resistance of as-received stainless steel wires and Ni-Ti wires to the wires treated by fluoride in vitro and in situ (P < 0.05. Two-way ANOVA was used to compare the effect of fluoride application and type of wire on friction resistance in vitro and in situ (P < 0.05. Results: Ni-Ti wires recorded significantly high friction resistance after fluoride application when compared to stainless steel wires in vitro, P < 0.05. Fluoride application did not significantly affect the friction resistance of the tested wires in situ, P < 0.05. SEM observation revealed deterioration of the surface texture of the Ni-Ti wires after fluoride application in vitro and in situ. Conclusions: The in vitro fluoride application caused an increase in friction resistance of Ni-Ti wires when compared to stainless steel wires. In vitro and in situ fluoride application caused deterioration in surface properties of Ni-Ti wires.

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies

OpenAIRE

Lara,Tulio Silva; Lancia,Melissa; Silva Filho,Omar Gabriel da; Garib,Daniela Gamba; Ozawa,Terumi Okada

2013-01-01

OBJECTIVE: To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. MATERIAL AND METHODS: Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender ; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment pl...

An update on periodontic-orthodontic interrelationships.

Science.gov (United States)

Dannan, Aous

2010-01-01

Talking about periodontic-orthodontic interrelationships is related primarily to the 1960s, where a generalized increase in salivary bacterial counts, especially Lactobacillus, had been shown after orthodontic band placement. The purpose of this article is to provide the dental practitioner with basic understanding of the interrelationship between periodontics and orthodontics by means of representing classical studies, and, to give an update on this topic by demonstrating the most recent opinions concerning periodontic-orthodontic interrelationships. Specific areas reviewed are the ability of orthodontic treatment to afford some degree of protection against periodontal breakdown, short-term and long-term effects of orthodontic treatment on the periodontium, and some mucogingival considerations. Topics considering orthodontic treatment in periodontally compromised patients were not included in this review. While past studies have shown that orthodontic treatment can positively affect the periodontal health, recent reviews indicate an absence of reliable evidence for the positive effects of orthodontic therapy on patients' periodontal status. Periodontic-orthodontic interrelationships are still controversial issues. However, a standard language between the periodontist and the orthodontist must always be established to eliminate the existing communications barrier, and to improve the outcomes of the whole treatment.

An update on periodontic-orthodontic interrelationships

Directory of Open Access Journals (Sweden)

Dannan Aous

2010-01-01

Full Text Available Talking about periodontic-orthodontic interrelationships is related primarily to the 1960s, where a generalized increase in salivary bacterial counts, especially Lactobacillus, had been shown after orthodontic band placement. The purpose of this article is to provide the dental practitioner with basic understanding of the interrelationship between periodontics and orthodontics by means of representing classical studies, and, to give an update on this topic by demonstrating the most recent opinions concerning periodontic-orthodontic interrelationships. Specific areas reviewed are the ability of orthodontic treatment to afford some degree of protection against periodontal breakdown, short-term and long-term effects of orthodontic treatment on the periodontium, and some mucogingival considerations. Topics considering orthodontic treatment in periodontally compromised patients were not included in this review. While past studies have shown that orthodontic treatment can positively affect the periodontal health, recent reviews indicate an absence of reliable evidence for the positive effects of orthodontic therapy on patients′ periodontal status. Periodontic-orthodontic interrelationships are still controversial issues. However, a standard language between the periodontist and the orthodontist must always be established to eliminate the existing communications barrier, and to improve the outcomes of the whole treatment.

Evolution of flexural rigidity according to the cross-sectional dimension of a superelastic nickel titanium orthodontic wire.

Science.gov (United States)

Garrec, Pascal; Tavernier, Bruno; Jordan, Laurence

2005-08-01

The choice of the most suitable orthodontic wire for each stage of treatment requires estimation of the forces generated. In theory, the selection of wire sequences should initially utilize a lower flexural rigidity; thus clinicians use smaller round cross-sectional dimension wires to generate lighter forces during the preliminary alignment stage. This assessment is true for conventional alloys, but not necessarily for superelastic nickel titanium (NiTi). In this case, the flexural rigidity dependence on cross-sectional dimension differs from the linear elasticity prediction because of the martensitic transformation process. It decreases with increasing deflection and this phenomenon is accentuated in the unloading process. This behaviour should lead us to consider differently the biomechanical approach to orthodontic treatment. The present study compared bending in 10 archwires made from NiTi orthodontics alloy of two cross-sectional dimensions. The results were based on microstructural and mechanical investigations. With conventional alloys, the flexural rigidity was constant for each wire and increased largely with the cross-sectional dimension for the same strain. With NiTi alloys, the flexural rigidity is not constant and the influence of size was not as important as it should be. This result can be explained by the non-constant elastic modulus during the martensite transformation process. Thus, in some cases, treatment can begin with full-size (rectangular) wires that nearly fill the bracket slot with a force application deemed to be physiologically desirable for tooth movement and compatible with patient comfort.

Interactive effects of periodontitis and orthodontic tooth movement on dental root resorption, tooth movement velocity and alveolar bone loss in a rat model.

Science.gov (United States)

Kirschneck, Christian; Fanghänel, Jochen; Wahlmann, Ulrich; Wolf, Michael; Roldán, J Camilo; Proff, Peter

2017-03-01

Many adult orthodontic patients suffer from chronic periodontitis with recurrent episodes of active periodontal inflammation. As their number is steadily increasing, orthodontists are more and more frequently challenged by respective treatment considerations. However, little is currently known regarding interactive effects on undesired dental root resorption (DRR), tooth movement velocity, periodontal bone loss and the underlying cellular and tissue reactions. A total of 63 male Fischer344 rats were used in three consecutive experiments employing 21 animals each (A/B/C), randomly assigned to 3 experimental groups (n=7, 1/2/3), respectively: (A) CBCT; (B) histology/serology; (C) RT-qPCR-(1) control; (2) orthodontic tooth movement (OTM) of the first/second upper left molars (NiTi coil spring, 0.25N); (3) OTM with experimentally induced periodontitis (cervical silk ligature). After 14days of OTM, we quantified blood leukocyte level, DRR, osteoclast activity and relative gene expression of inflammatory and osteoclast marker genes within the dental-periodontal tissue as well as tooth movement velocity and periodontal bone loss after 14 and 28 days. The experimentally induced periodontal bone loss was significantly increased by concurrent orthodontic force application. Periodontal inflammation during OTM on the other hand significantly augmented the extent of DRR, relative expression of inflammatory/osteoclast marker genes, blood leukocyte level and periodontal osteoclast activity. In addition, contrary to previous studies, we observed a significant increase in tooth movement velocity. Although accelerated tooth movement would be favourable for orthodontic treatment, our results suggest that orthodontic interventions should only be performed after successful systematic periodontal therapy and paused in case of recurrent active inflammation. Copyright © 2016 Elsevier GmbH. All rights reserved.

Assessment of the hardness of different orthodontic wires and brackets produced by metal injection molding and conventional methods.

Science.gov (United States)

Alavi, Shiva; Kachuie, Marzie

2017-01-01

This study was conducted to assess the hardness of orthodontic brackets produced by metal injection molding (MIM) and conventional methods and different orthodontic wires (stainless steel, nickel-titanium [Ni-Ti], and beta-titanium alloys) for better clinical results. A total of 15 specimens from each brand of orthodontic brackets and wires were examined. The brackets (Elite Opti-Mim which is produced by MIM process and Ultratrimm which is produced by conventional brazing method) and the wires (stainless steel, Ni-Ti, and beta-titanium) were embedded in epoxy resin, followed by grinding, polishing, and coating. Then, X-ray energy dispersive spectroscopy (EDS) microanalysis was applied to assess their elemental composition. The same specimen surfaces were repolished and used for Vickers microhardness assessment. Hardness was statistically analyzed with Kruskal-Wallis test, followed by Mann-Whitney test at the 0.05 level of significance. The X-ray EDS analysis revealed different ferrous or co-based alloys in each bracket. The maximum mean hardness values of the wires were achieved for stainless steel (SS) (529.85 Vickers hardness [VHN]) versus the minimum values for beta-titanium (334.65 VHN). Among the brackets, Elite Opti-Mim exhibited significantly higher VHN values (262.66 VHN) compared to Ultratrimm (206.59 VHN). VHN values of wire alloys were significantly higher than those of the brackets. MIM orthodontic brackets exhibited hardness values much lower than those of SS orthodontic archwires and were more compatible with NiTi and beta-titanium archwires. A wide range of microhardness values has been reported for conventional orthodontic brackets and it should be considered that the manufacturing method might be only one of the factors affecting the mechanical properties of orthodontic brackets including hardness.

Antibacterial and remineralizing orthodontic adhesive containing quaternary ammonium resin monomer and amorphous calcium phosphate nanoparticles.

Science.gov (United States)

Liu, Yan; Zhang, Ling; Niu, Li-Na; Yu, Tao; Xu, Hockin H K; Weir, Michael D; Oates, Thomas W; Tay, Franklin R; Chen, Ji-Hua

2018-05-01

To evaluate the bonding performance, antibacterial activity, and remineralization effect on enamel of the orthodontic adhesive containing MAE-DB and NACP. Eighty non-carious human premolars were divided into 3 groups: Transbond XT (TB), PEHB + 5% MAE-DB (PD), and PEHB + 40% NACP + 5% MAE-DB (PND). Premolars were bonded with orthodontic brackets, the first subgroup (n = 10) and the second subgroup (n = 10) were subjected to shear bond strength testing after immersed in water for 1 day and in demineralization solution for 28 days respectively and then tested surface roughness, while the third subgroup (n = 6) was used for microhardness evaluation after aged in demineralization solution for 28 days. For each adhesive, fifty disk samples were prepared for antibacterial study. Specimens measuring 12 mm × 2 mm × 2 mm were fabricated for ion release test. Bond strengths were in the order TB = PND > PND = PD for "1-day in water", and in the order TB = PND > PD for "28-days in pH 4 solution". No significant difference in the ARI scores for the three adhesive. Numerous bacteria adhered to TB surface, while PD and PND had minimal bacterial growth and activity. PND showed high levels of Ca and P ions release and enamel hardness. The surface roughness of enamel in PND was much lower than TB and PD and showed no significant difference with the sound, control enamel. PND adhesive with 5% MAE-DB and 40% NACP exhibits antibacterial and remineralizing capabilities, and did not adversely affect bond strength compared to commercial adhesive. Novel adhesive containing quaternary ammonium monomer and nano-amorphous calcium phosphate represents a promising candidate in combating enamel white spot lesions and even dental caries. Copyright © 2018 Elsevier Ltd. All rights reserved.

OBJECTIVE AND SUBJECTIVE EVALUATION OF ADOLESCENT'S ORTHODONTIC TREATMENT NEEDS AND THEIR IMPACT ON SELF-ESTEEM.

Science.gov (United States)

Sharma, Anshika; Mathur, Anmol; Batra, Manu; Makkar, Diljot Kaur; Aggarwal, Vikram Pal; Goyal, Nikita; Kaur, Puneet

2017-01-01

To investigate the presence of association between objective and subjective evaluation of orthodontic treatment needs in adolescents and their impact on their self-esteem. Cross-sectional study with adolescents aged 10-17 years old in Sri Ganganagar city, Rajasthan, India. The objective index of orthodontic treatment need (IOTN) dental health component (DHC) and the subjective aesthetic component (AC) were used to determine the normative and the self-perception need for orthodontic treatment, respectively. The selected students were further examined for dental trauma, tooth loss, and dental caries. Rosenberg Self-Esteem Scale was applied for self-esteem level determination. Linear regression analysis was executed to test the individual association of different independent clinical variables with self-esteem scores. Among 1,140 studied adolescents, the prevalence of dental normative orthodontic treatment need was in 56.9% of individuals, whereas 53.3% of individuals considered themselves as needy for the treatment. Multivariate analyses revealed that out of all dental disorders, DHC followed by AC of IOTN had maximum impact on the self-esteem of the adolescence. Dissatisfaction with dental appearance is a strong predictor for low self-esteem in adolescence.

A study of the bone healing kinetics of plateau versus screw root design titanium dental implants.

LENUS (Irish Health Repository)

Leonard, Gary

2009-03-01

This study was designed to compare the bone healing process around plateau root from (PRF) and screw root from (SRF) titanium dental implants over the immediate 12 week healing period post implant placement.

Effect of the probiotic bacterium Lactobacillus reuteri on white spot lesion development in orthodontic patients

DEFF Research Database (Denmark)

Gizani, Sotiria; Petsi, Georgia; Twetman, Svante

2016-01-01

BACKGROUND/OBJECTIVES: The purpose of the study is to evaluate the effect of daily intake of lozenges containing probiotic bacteria on white spot lesion (WSL) formation as well as on salivary lactobacilli (LB) and mutans streptococci (MS) counts, in patients undergoing orthodontic treatment...... and randomly allocated to a test or placebo group. Subjects in the test group were instructed to take one probiotic lozenge containing two strains of Lactobacillus reuteri once daily. An identical lozenge without active bacteria was used in the placebo group. Dental plaque, WSL, and salivary MS and LB levels....../CLINICAL IMPLICATIONS: Daily intake of probiotic lozenges did not seem to affect the development of WSL during orthodontic treatment with fixed appliances....

ASSESSMENT OF ROOT RESORPTION DEGREE OF INCISORS AFTER ORTHODONTIC TREATMENT IN ADULTS

Directory of Open Access Journals (Sweden)

I. Luchian

2012-03-01

Full Text Available The main iatrogenic effects associated with orthodontic treatment refer to: influence of orthodontic rings on the periodontal tissue; gum retractions; the effect of the orthodontic treatment on dental root (root resorption; the effect of the orthodontic treatment on alveolar bone height; mobility and pain associated with orthodontic treatment. AIM of the study: To assess the degree of root resorption of incisors, after orthodontic treatment, on a group of 48 adults with dental-maxillary abnormalities. Materials and method: The study included 48 young adult patients, 35 women and 13 men aged 18 to 30 years, who had received fixed orthodontic treatment. To assess the degree of root resorption (changes at root level and apical contour length, apical radiographies were taken in the maxillary incisors and jaw both at the beginning and end of the orthodontic treatment. Results: Out of the 239 incisors examined at the beginning of orthodontic treatment, 163 showed code 0, meaning 88.1%, and 50 showed a slight squash apex (code 1, respectively 10.9%. Only 1% of all incisors assessed presented mild and severe root resorption. Conclusions: The results of the study show that, generally, an adult orthodontic treatment, applied for functional and aesthetic objectives, may have clinically acceptable iatrogenic effects.

Application of orthodontic treatment for the periodontal and restorative goals in adults

Directory of Open Access Journals (Sweden)

Hiroshi Kamioka

2016-06-01

Full Text Available There are increasing number of adult patients who started orthodontic treatment in the last decade. As for the patient with the age of 40 years or older in our clinic, it increases 4 times as much as ten years ago. It seems that orthodontic treatment for the elderly person gradually recognized in our society. At the same time, it is considered as one of the factors that the introduction from a dentist increased to facilitate their dental procedures necessary to control dental disease, restore function, and/or enhance appearance. Therefore, in this lecture, I would like to think about how we can make use of orthodontic treatment for adults to have ideal periodontal and restorative goals. In addition, the benefits and risks of adjunctive orthodontic treatment and comprehensive orthodontic treatment would be discussed with the presenting case reports.

The combined action of UV irradiation and chemical treatment on the titanium surface of dental implants

Energy Technology Data Exchange (ETDEWEB)

Spriano, Silvia [Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi, 24-10129 Torino (Italy); Ferraris, Sara, E-mail: sara.ferraris@polito.it [Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi, 24-10129 Torino (Italy); Bollati, Daniele; Morra, Marco; Cassinelli, Clara [Nobil Bio Ricerche, Portacomaro (Italy); Lorenzon, Giorgio [Centro Chirurgico, Via Mallonetto, 47, 10032, Brandizzo Torino (Italy)

2015-09-15

Highlights: • A combined UV irradiation and H{sub 2}O{sub 2} treatment was applied to titanium surfaces. • A thin, homogeneous, not porous, crack-free and bioactive oxide layer was obtained. • The process significantly improves the biological response of titanium surfaces. • A clinical case demonstrates the effectiveness of the proposed treatment. - Abstract: The purpose of this paper is to describe an innovative treatment for titanium dental implants, aimed at faster and more effective osteointegration. The treatment has been performed with the use of hydrogen peroxide, whose action was enhanced by concomitant exposure to a source of ultraviolet light. The developed surface oxide layer was characterized from the physical and chemical points of view. Moreover osteoblast-like SaOS2 cells were cultured on treated and control titanium surfaces and cell behavior investigated by scanning electron microscope observation and gene expression measurements. The described process produces, in only 6 min, a thin, homogeneous, not porous, free of cracks and bioactive (in vitro apatite precipitation) oxide layer. High cell density, peculiar morphology and overexpression of several genes involved with osteogenesis have been observed on modified surfaces. The proposed process significantly improves the biological response of titanium surfaces, and is an interesting solution for the improvement of bone integration of dental implants. A clinical application of the described surfaces, with a 5 years follow-up, is reported in the paper, as an example of the effectiveness of the proposed treatment.

Computer-Based Oral Hygiene Instruction versus Verbal Method in Fixed Orthodontic Patients

Science.gov (United States)

Moshkelgosha, V.; Mehrvarz, Sh.; Saki, M.; Golkari, A.

2017-01-01

Statement of Problem: Fixed orthodontic appliances in the oral cavity make tooth cleaning procedures more complicated. Objectives: This study aimed to compare the efficacy of computerized oral hygiene instruction with verbal technique among fixed orthodontic patients referred to the evening clinic of Orthodontics of Shiraz Dental School. Materials and Methods: A single-blind study was performed in Orthodontic Department of Shiraz, Islamic Republic of Iran, from January to May 2015 following the demonstrated exclusion and inclusion criteria. The sample size was considered 60 patients with 30 subjects in each group. Bleeding on probing and plaque indices and dental knowledge were assessed in the subjects to determine pre-intervention status. A questionnaire was designed for dental knowledge evaluation. The patients were randomly assigned into the computerized and verbal groups. Three weeks after the oral hygiene instruction, indices of bleeding on probing and plaque index and the dental knowledge were evaluated to investigate post-intervention outcome. The two groups were compared by chi-square and student t tests. The pre- and post-intervention scores in each group were compared using paired t-test. Results: In the computerized group, the mean score for plaque index and bleeding on probing index was significantly decreased while dental health knowledge was significantly increased after oral hygiene instruction, in contrast to the verbal group. Conclusions: Within the limitations of the current study, computerized oral hygiene instruction is proposed to be more effective in providing optimal oral health status compared to the conventional method in fixed orthodontic patients. PMID:28959765

Conservative reconstruction of the smile by orthodontic, bleaching, and restorative procedures

Science.gov (United States)

Sundfeld, Renato Herman; Machado, Lucas Silveira; de Oliveira, Fernanda Garcia; Santos, Eduardo Almada; Lugato, Isabel Cristina Prado Torres; Sundfeld Neto, Daniel

2012-01-01

The following is a clinical case report of a patient whose chief complaint was the presence of generalized spacing in the maxillary anterior segment following orthodontic treatment. After meticulous clinical analyses and discussions of the clinical procedures to be adopted, dental bleaching was performed in both arches with 10% hydrogen peroxide (Opalescence Trèswhite Supreme 10% Hydrogen Peroxide - Ultradent Products, Inc., South Jordan, USA) after the conclusion and stabilization of orthodontic treatment. Then, the orthodontic appliance was removed and the diastemas in the maxillary anterior teeth were closed with Amelogen Plus (Ultradent Products, Inc., South Jordan, USA) resin composite. It was observed that the association of orthodontic, bleaching, and restorative procedures was capable of restoring dental shape, function, and esthetics, allowing the patient to smile without hesitation. PMID:22229015

Copper, Aluminum and Nickel: A New Monocrystalline Orthodontic Alloy

Science.gov (United States)

Wierenga, Mark

Introduction: This study was designed to evaluate, via tensile and bend testing, the mechanical properties of a newly-developed monocrystalline orthodontic archwire comprised of a blend of copper, aluminum, and nickel (CuAlNi). Methods: The sample was comprised of three shape memory alloys; CuAlNi, copper nickel titanium (CuNiTi), and nickel titanium (NiTi); from various orthodontic manufacturers in both 0.018" round and 0.019" x 0.025" rectangular dimensions. Additional data was gathered for similarly sized stainless steel and beta-titanium archwires as a point of reference for drawing conclusions about the relative properties of the archwires. Measurements of loading and unloading forces were recorded in both tension and deflection testing. Repeated-measure ANOVA (alpha= 0.05) was used to compare loading and unloading forces across wires and one-way ANOVA (alpha= 0.05) was used to compare elastic moduli and hysteresis. To identify significant differences, Tukey post-hoc comparisons were performed. Results: The modulus of elasticity, deflection forces, and hysteresis profiles of CuAlNi were significantly different than the other superelastic wires tested. In all tests, CuAlNi had a statistically significant lower modulus of elasticity compared to the CuNiTi and NiTi wires (P orthodontic metallurgy.

Multi-disciplinary approach for enhancing orthodontic esthetics – case report

Directory of Open Access Journals (Sweden)

Kalia A

2015-08-01

Full Text Available Ajit Kalia, Nasim Mirdehghan, Sonali Khandekar, Wasu Patil Department of Orthodontics, MA Rangoonwala Dental College, Pune, IndiaBackground: In contemporary dental care, an increasing number of adult patients are now seeking orthodontic treatment with the primary motive of improvement in appearance and achievement of esthetic smile. Proper recognition of the dental and facial defects at the outset of treatment is the most important key to esthetic success and is essential in satisfying the patient's needs. By following the rules of Golden proportion smiles can be made attractive, harmonious, symmetrical, and proportionate. Methodology: Consisted of 22-year-old girl who came for treatment of crowding in maxillary and mandibular arches, abnormal overjet and overbite and had unaesthetic peg lateral.Results: Non-extraction therapy was carried out since the patient had good soft tissue drape, alignment was achieved by expanding the arches and moving teeth in ideal axial inclination. Esthetic smile was attained using composite buildup of upper right peg lateral and minor adjunctive surgery (full thickness periodontal graft on lower right central incisor.Conclusion: The present case report orchestrates interrelationship between various branches of dentistry and orthodontics. It exhibits how multidisciplinary approach can be used to achieve ideal dental esthetics in a 22-year-old girl who was successfully treated for peg shaped lateral incisor, gingival recession, and unaesthetic smile. Keywords: adult orthodontics, peg lateral, gingival recession, golden proportion

A combined prosthodontic and orthodontic treatment approach in a case of growth inhibition induced by dental implants: a case report.

Science.gov (United States)

Krieger, Elena; Wegener, Joachim; Wagner, Wilfried; Hornikel, Sandra; Wehrbein, Heinrich

2012-01-01

Functional and esthetic results can improve significantly when a combined prosthodontic-orthodontic treatment approach is employed in cases requiring extensive oral rehabilitation. The patient presented in this case report was treated in his late teens with dental implants as a replacement for his maxillary incisors. Ten years later, the entire maxillary anterior segment was in infraocclusion compared to the rest of the dentition and lip line. Since prosthodontic follow-up treatment alone could not achieve an optimal functional and esthetic outcome, the patient was treated orthodontically prior to renewing the restoration. A fixed appliance was used to intrude the mandibular anterior teeth as well as vertically align the infrapositioned maxillary lateral incisors.

Effectiveness of an audience response system on orthodontic knowledge retention of undergraduate dental students--a randomised control trial.

Science.gov (United States)

Robson, Nicholas; Popat, Hashmat; Richmond, Stephen; Farnell, Damian J J

2015-01-01

To determine the effect of an audience response system (ARS) on knowledge retention of dental students and to gauge student perceptions of using the ARS. Randomised control study. School of Dentistry, Cardiff University. Seventy four second-year dental students were stratified by gender and randomised anonymously to one of two groups. One group received a lecture on orthodontic terminology and diagnosis in a traditional didactic format and the other received the same lecture integrated with ARS slides. Students completed an assessment of multiple-choice questions (MCQs) scored out of 20, before and immediately after the lecture. Students were also asked to complete a self-reported questionnaire on their perceptions of ARS. Both groups had statistically significant increases in MCQ scores post-lecture (ARS mean increase 3.6 SD2.0, 95% CI 2.2-3.5 and Didactic mean increase 2.9 SD2.3, 95% CI 2.8-4.3). A mixed-design analysis of variance showed that ARS led to an improved MCQ score (by 0.8 or 25%) compared to the didactic group, although this effect was not significant (P = 0.15). The effect of gender at baseline (P = 0.49), post-lecture (P = 0.73) and increase in MCQ score split by group (P = 0.46) was also not significant. Students reported that the ARS was easy to use, helped them engage with the lecture and encouraged them to work harder. The ARS did not lead to a significant increase in short-term orthodontic knowledge recall of students compared with didactic teaching. However, the use of ARS within orthodontic teaching could make lectures more interactive and engaging.

A Novel Method of Coating Orthodontic Archwires with Nanoparticles

Science.gov (United States)

Syed, Shibli S; Kulkarni, Dinraj; Todkar, Rohit; Bagul, Ravikiran S; Parekh, Kreena; Bhujbal, Nikita

2015-01-01

Background: The major hazard to the orthodontic tooth movement is the friction developing at the bracket wire interface. In the past, there have been various attempts to reduce this friction. We believe that coating the commercially available orthodontic wires with nanoparticles can result in a successful reduction of this friction. The objective of this study is to develop a novel method of coating orthodontic archwires with nanoparticles. Materials and Methods: Stainless steel (Ormco, CA, USA), titanium molybdenum alloy (Ormco, CA, USA) and nickel-titanium (G and H Wire Company, USA) orthodontic wires with a rectangular cross-section dimension of 0.019”× 0.025”, were selected. The wires were later coated with a uniform and smooth nanoparticle film using 100 ml nanocremics. The coating procedure described in this article is a sol-gel thin film dip coating method. Results: The coating procedure was verified by comparing the surface topography of nanocoated archwires with the commercially available archwires in an environmental scanning electron microscope (ESEM). The ESEM images prove that the surface topography of the coated wires was found to be smoother with less surface deteriorations as compared to the commercially available wires. Conclusion: Commercially available orthodontic wires can be successfully coated using a novel method of sol-gel thin film dip coating method. PMID:26028899

ORTHODONTIC DEVICES VS. ALLERGIC REACTIONS IN CHILDREN AND YOUNG ADULTS

Directory of Open Access Journals (Sweden)

Alina Sodor

2012-09-01

Full Text Available Scope. The scope of the study was to evaluate the adverse reactions upon the intra- and extraoral tissues, produced by the insertion of orthodontic devices, on a populational group of Romania, for determining the frequencies of the allergic reactions and for comparing them with the sex, age, urban/rural background, malocclusion, orthodontic device, oral hygiene prior to and during the orthodontic treatment. Materials and method. The observation sheets of 621 patients (255 boys and 366 girls with ages between 6 and 29 years, from the Orthodontics Clinics of the Policlinics of the “Sf. Spiridon” Urgency Hospital and from a private orthodontic consulting room of Iaşi, have been statistically evaluated with the SPSS 17.0 for Windows program. Results. Pearson correlation and linear regression evidenced the relations between the adverse reactions produced during the orthodontic treatment, on one side, and the age, dental hygiene and types of orthodontic devices, on the other. The results obtained put into evidence significant relations between the adolescent age and the allergy to nickel manifested in antecedents, between the scarce oral hygiene of the patients prior to the orthodontic treatment and gingival enlargement, between the scarce oral hygiene of the patients during the orthodontic treatment and the localized or generalized gingivitis and the bleedings and gingival overgrowths, between the mobile orthodontic devices and the allergic reactions to acrylic resins (p and t = 0.000. Relevant connections have been also evidenced between the fixed orthodontic devices and the allergic reactions to the polymeric biomaterials from the orthodontic devices (p = 0.005 and t = 0.034. Conclusions. Statistical evaluation of the adverse effects induced by orthodontic devices may be used for stating the development of allergic reactions to the substances entering the composition of orthodontic devices, with reference to the cytotoxicology and

The indications of polyethylene in the orthodontic field

Directory of Open Access Journals (Sweden)

Grigore Adelina

2016-12-01

Full Text Available OBJECTIVES AND BACKGROUND Our study aims to find multiple applications of the PETG foils in the orthodontic field and to evaluate the efficiency of aligner foils regarding strain values among different thickness categories. MATERIALS AND METHODS In office set-ups were fabricated for different orthodontic malocclusions. PETG foils, multi-layer foils, Clear Aligner expansion screws and acrylic components were used for the manufacturing of invisible appliances. Foil thickness and heat behavior, strain values, using special strain gauges and esthetics were taken into account. A 4 week recall was scheduled in order to observe the treatment progress regarding PETG appliances. Measurements were performed to determine to optimal foil thickness. RESULTS Dental alignment and expansion were observed in all cases. Regarding behavior to heat, the 1 mm foil presented only a small reduction in thickness compared to other foils and the strain values seem to be higher for the thinner aligners. CONCLUSIONS The orthodontic appliances made out of polyethylene provide good results due to rigidity and dimensional stability. We are still conducting continuous research in this area in order to obtain further data. Graphical abstract: The thermoplastic aligner with a Clear Aligner screw for dental expansion (an in-office set-up was used for the manufacturing of the aligner REFERENCES 1.Thukral R., Gupta A. Invisalign: Invisible Orthodontic Treatment- A Review. Journal of Advanced Medical and Dental Sciences Research. 2015;3:42-44 2. Hyo WA. A new type of clear orthodontic retainer incorporating multi-layer hybrid materials. Korean J Orthod. 2015;45: 268–272. 3. Szuhanek C, Grigore A, Fleser T. The applications of thermoplastic materials in the fabrication of orthodontic aligners. Materiale plastic. 2015;52:385- 387.

Knowledge of Orthodontics as a Dental Specialty: A Preliminary ...

African Journals Online (AJOL)

% correctly answered that orthodontics involves malocclusion and its management. Concerning the treatment procedures used in orthodontic clinics, 54.1% of them selected rearrangement of teeth. When asked to identify the appliances used in ...

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

Science.gov (United States)

Ikeda, Yuhei; Kokai, Satoshi; Ono, Takashi

2018-01-01

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Finite element modeling of superelastic nickel-titanium orthodontic wires.

Science.gov (United States)

Naceur, Ines Ben; Charfi, Amin; Bouraoui, Tarak; Elleuch, Khaled

2014-11-28

Thanks to its good corrosion resistance and biocompatibility, superelastic Ni–Ti wire alloys have been successfully used in orthodontic treatment. Therefore, it is important to quantify and evaluate the level of orthodontic force applied to the bracket and teeth in order to achieve tooth movement. In this study, three dimensional finite element models with a Gibbs-potential-based-formulation and thermodynamic principles were used. The aim was to evaluate the influence of possible intraoral temperature differences on the forces exerted by NiTi orthodontic arch wires with different cross sectional shapes and sizes. The prediction made by this phenomenological model, for superelastic tensile and bending tests, shows good agreement with the experimental data. A bending test is simulated to study the force variation of an orthodontic NiTi arch wire when it loaded up to the deflection of 3 mm, for this task one half of the arch wire and the 3 adjacent brackets were modeled. The results showed that the stress required for the martensite transformation increases with the increase of cross-sectional dimensions and temperature. Associated with this increase in stress, the plateau of this transformation becomes steeper. In addition, the area of the mechanical hysteresis, measured as the difference between the forces of the upper and lower plateau, increases.

OBJECTIVE AND SUBJECTIVE EVALUATION OF ADOLESCENT’S ORTHODONTIC TREATMENT NEEDS AND THEIR IMPACT ON SELF-ESTEEM

Science.gov (United States)

Sharma, Anshika; Mathur, Anmol; Batra, Manu; Makkar, Diljot Kaur; Aggarwal, Vikram Pal; Goyal, Nikita; Kaur, Puneet

2017-01-01

ABSTRACT Objective: To investigate the presence of association between objective and subjective evaluation of orthodontic treatment needs in adolescents and their impact on their self-esteem. Methods: Cross-sectional study with adolescents aged 10-17 years old in Sri Ganganagar city, Rajasthan, India. The objective index of orthodontic treatment need (IOTN) dental health component (DHC) and the subjective aesthetic component (AC) were used to determine the normative and the self-perception need for orthodontic treatment, respectively. The selected students were further examined for dental trauma, tooth loss, and dental caries. Rosenberg Self-Esteem Scale was applied for self-esteem level determination. Linear regression analysis was executed to test the individual association of different independent clinical variables with self-esteem scores. Results: Among 1,140 studied adolescents, the prevalence of dental normative orthodontic treatment need was in 56.9% of individuals, whereas 53.3% of individuals considered themselves as needy for the treatment. Multivariate analyses revealed that out of all dental disorders, DHC followed by AC of IOTN had maximum impact on the self-esteem of the adolescence. Conclusions: Dissatisfaction with dental appearance is a strong predictor for low self-esteem in adolescence. PMID:28977320

Creation of 3D Multi-Body Orthodontic Models by Using Independent Imaging Sensors

Directory of Open Access Journals (Sweden)

Armando Viviano Razionale

2013-02-01

Full Text Available In the field of dental health care, plaster models combined with 2D radiographs are widely used in clinical practice for orthodontic diagnoses. However, complex malocclusions can be better analyzed by exploiting 3D digital dental models, which allow virtual simulations and treatment planning processes. In this paper, dental data captured by independent imaging sensors are fused to create multi-body orthodontic models composed of teeth, oral soft tissues and alveolar bone structures. The methodology is based on integrating Cone-Beam Computed Tomography (CBCT and surface structured light scanning. The optical scanner is used to reconstruct tooth crowns and soft tissues (visible surfaces through the digitalization of both patients’ mouth impressions and plaster casts. These data are also used to guide the segmentation of internal dental tissues by processing CBCT data sets. The 3D individual dental tissues obtained by the optical scanner and the CBCT sensor are fused within multi-body orthodontic models without human supervisions to identify target anatomical structures. The final multi-body models represent valuable virtual platforms to clinical diagnostic and treatment planning.

Assessment of psychosocial impact of dental aesthetics.

Science.gov (United States)

Khan, Munizeh; Fida, Mubassar

2008-09-01

To assess the psychosocial impact of dental aesthetics using the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ) and self-rated Aesthetic Component (AC) of the Index of Orthodontic Treatment Need (IOTN). Cross-sectional study. Dental Section, the Aga Khan University Hospital, Karachi, from August to September 2006. Adults with no prior orthodontic treatment were asked to complete a modified version of the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ). A total of four variables including 'Dental Self-confidence', 'Social impact', 'Psychological impact' and 'Perceived orthodontic treatment need' were assessed by a series of statements, whereas dental aesthetics were assessed by the respondents using the IOTN Aesthetic Component (self-rated IOTN-AC). Kruskal-Walli's test was applied to determine significance. The respondents were 120 adults (70 females and 50 males; mean age 25.8 years), all four of the above-mentioned variables measuring psychosocial impact showed positive and significant correlations with the perceived severity of malocclusion as depicted by the Aesthetic Component (AC) of Index of Orthodontic Treatment Need (IOTN), with p-value of less than 0.01 for all variables. The results indicate the strong psychosocial impact of altered dental aesthetics on the emotional state of an individual. The association between self-rated IOTN-AC grading with psychosocial well-being stands established, indicating that the perceived aesthetics of malocclusion may be as significant a factor in determining treatment need as the degree of malocclusion.

Effect of Sodium Fluoride Mouthwash on the Frictional Resistance of Orthodontic Wires

Directory of Open Access Journals (Sweden)

Allahyar Geramy

2017-12-01

Full Text Available Objectives: The friction between the brackets and orthodontic wire during sliding mechanics inflicts difficulties such as decreasing the applied force and tooth movement and also the loss of anchorage. Therefore, many studies have focused on the factors that affect the friction. The purpose of this study was to assess the effect of 0.05% sodium fluoride mouthwash on the friction between orthodontic brackets and wire.Materials and Methods: Four types of orthodontic wires including rectangular standard stainless steel (SS, titanium molybdenum alloy (TMA, nickel-titanium (NiTi and copper-nickel-titanium (Cu-NiTi were selected. In each group, half of the samples were immersed in 0.05% sodium fluoride mouthwash and the others were immersed in artificial saliva for 10 hours. An elastomeric ligature was used for ligating the wires to brackets. The frictional test was performed in a universal testing machine at the speed of 10 mm/minute. Two-way ANOVA was used for statistical analysis of the friction rate.Results: The friction rate was significantly higher after immersion in 0.05% sodium fluoride mouthwash in comparison with artificial saliva (P=0.00. Cu-NiTi wire showed the highest friction value followed by TMA, NiTi and SS wires.  Conclusions: According to the results of the current study, 0.05% sodium fluoride mouthwash increased the frictional characteristics of all the evaluated orthodontic wires.

Partial pulp necrosis caused by excessive orthodontic force

Directory of Open Access Journals (Sweden)

Min-Young Kim

2011-03-01

Full Text Available As the dental pulp is encased with a rigid, noncompliant shell, changes in pulpal blood flow or vascular tissue pressure can have serious implication for the health of pulp. Numerous studies have demonstrated that orthodontic force application may influence both blood flow and cellular metabolism, leading degenerative and/or inflammatory responses in the dental pulp. The aim of this case report is to present a case about tooth with chronic periapical abscess which showed normal vital responses. Excessive orthodontic force is thought to be the prime cause of partial pulp necrosis. Owing to remaining vital tissue, wrong dianosis can be made, and tooth falsely diagnosed as vital may be left untreated, causing the necrotic tissue to destroy the supporting tissuses. Clinician should be able to utilize various diagnostic tools for the precise diagnosis, and be aware of the endodontic-orthodontic inter-relationship.

Orthodontic and surgical approach to the treatment of bilaterally impacted maxillary canines: a case report.

Science.gov (United States)

Ertan Erdinc, Aslihan M

2008-01-01

Impaction of maxillary canines is a common orthodontic anomaly that causes facial and dentoalveolar system problems, both functional and esthetic. A combination of surgery and orthodontics is important in bringing impacted canines to their ideal position in the dental arch. In this case report of a 14-year-old patient with impacted right and left maxillary canines, the crowns of these teeth were surgically exposed, brackets were bonded, and light orthodontic forces were delivered for 2 years to align the teeth in the dental arch.

Novel Dental Cement to Combat Biofilms and Reduce Acids for Orthodontic Applications to Avoid Enamel Demineralization

Directory of Open Access Journals (Sweden)

Ning Zhang

2016-05-01

Full Text Available Orthodontic treatments often lead to biofilm buildup and white spot lesions due to enamel demineralization. The objectives of this study were to develop a novel bioactive orthodontic cement to prevent white spot lesions, and to determine the effects of cement compositions on biofilm growth and acid production. 2-methacryloyloxyethyl phosphorylcholine (MPC, nanoparticles of silver (NAg, and dimethylaminohexadecyl methacrylate (DMAHDM were incorporated into a resin-modified glass ionomer cement (RMGI. Enamel shear bond strength (SBS was determined. Protein adsorption was determined using a micro bicinchoninic acid method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate metabolic activity, colony-forming units (CFU and lactic acid production. Incorporating 3% of MPC, 1.5% of DMAHDM, and 0.1% of NAg into RMGI, and immersing in distilled water at 37 °C for 30 days, did not decrease the SBS, compared to control (p > 0.1. RMGI with 3% MPC + 1.5% DMAHDM + 0.1% NAg had protein amount that was 1/10 that of control. RMGI with triple agents (MPC + DMAHDM + NAg had much stronger antibacterial property than using a single agent or double agents (p < 0.05. Biofilm CFU on RMGI with triple agents was reduced by more than 3 orders of magnitude, compared to commercial control. Biofilm metabolic activity and acid production were also greatly reduced. In conclusion, adding MPC + DMAHDM + NAg in RMGI substantially inhibited biofilm viability and acid production, without compromising the orthodontic bracket bond strength to enamel. The novel bioactive cement is promising for orthodontic applications to hinder biofilms and plaque buildup and enamel demineralization.

Evaluation of effects of ionizing radiation on the titanium used in dental restorations

International Nuclear Information System (INIS)

Maio, Mireia Florencio; Santos, Adimir dos; Fernandes, Marco A.R.

2009-01-01

The purpose of this work consisted of quantitative studies of the effects caused by ionizing radiation on titanium, a material used in dental restorations. Titanium is used to mitigate the deleterious effects of radiotherapy when patients with tumors in head and neck, seen when the teeth are restored within in the field of radiation. Samples were submitted to X-radiation beams from 6 and 10 Mega - Volt (MV) from a linear accelerator, VARIAN 2100C model. The samples were analyzed by X-ray fluorescence techniques to compare the chemical composition before and after the irradiation. Sample dose measurements were performed employing Geiger-Mueller detectors and the ionization chamber in order to verify any residual radiation in the samples. The samples were also analyzed by gamma spectrometry by a HPGe detector. These tests were performed to determine small changes in the composition in the samples due to the radiation interaction. The results of this study may encourage the development of new research for alternative materials in dental restorations that can contribute to improve the quality of life of those patients with tumors of the mouth. (author)

Comparison between probiotic lozenges and drinks towards periodontal status improvement of orthodontic patients

Directory of Open Access Journals (Sweden)

Natasia Melita Kohar

2015-09-01

Full Text Available Background: Fixed orthodontic appliances may interfere with daily oral hygiene procedure, causing more abundant plaque accumulation, therefore increasing the risk of periodontal disease. Probiotic methods represent a breakthrough approach in maintaining oral health and preventing periodontal disease. Purpose: The aim of this study was to compare the effect between probiotic lozenges containing Lactobacillus reuteri and probiotic drinks containing Lactobacillus casei strain Shirota towards periodontal status of orthodontic patients. Method: Fixed orthodontic patients (n=30 from Faculty of Dentistry, Trisakti University Dental Hospital were included in this clinical trial. Periodontal status consisting of Plaque Index (PlI, Interdental Hygiene Index (HYG, and Papillary Bleeding Index (PBI were then recorded from each patient. All patients received the phase one of periodontal treatment, as well as plaque control instruction. The subjects (n=10/gp were randomly assigned to one of three groups; control group; probiotic lozenges group (Biogaia®; and probiotic drinks group (Yakult®. For 14 days, the probiotic groups were instructed to use the probiotic. Periodontal index improvement (PlI, HYG, and PBI was found in all groups after 14 days research periode. These indices were then analyzed using Kruskal-Wallis analysis test. Result: It was found that L. reuteri and L. casei strain Shirota may improve periodontal status in fixed orthodontic patients. The best results were obtained from probiotic lozenges group. However, the results were not statistically significant (p>0.05. Conclusion: It was concluded that probiotics consumption containing L. reuteri and L. casei strain Shirota may slightly improve periodontal status in fixed orthodontic patients.

Efficient free-form surface representation with application in orthodontics

Science.gov (United States)

Yamany, Sameh M.; El-Bialy, Ahmed M.

1999-03-01

Orthodontics is the branch of dentistry concerned with the study of growth of the craniofacial complex. The detection and correction of malocclusion and other dental abnormalities is one of the most important and critical phases of orthodontic diagnosis. This paper introduces a system that can assist in automatic orthodontics diagnosis. The system can be used to classify skeletal and dental malocclusion from a limited number of measurements. This system is not intended to deal with several cases but is aimed at cases more likely to be encountered in epidemiological studies. Prior to the measurement of the orthodontics parameters, the position of the teeth in the jaw model must be detected. A new free-form surface representation is adopted for the efficient and accurate segmentation and separation of teeth from a scanned jaw model. THe new representation encodes the curvature and surface normal information into a 2D image. Image segmentation tools are then sued to extract structures of high/low curvature. By iteratively removing these structures, individual teeth surfaces are obtained.

Orthodontics at a Pivotal Point of Transformation

Science.gov (United States)

Mao, Jeremy J.

2014-01-01

The profession of orthodontics is projected to face a multitude of challenges. Do cyclic forces accelerate the rate of tooth movement and hence the speed of orthodontic treatment? Would bioengineered cementum and dentine be a solution to root resorption? What would orthodontics be like when bioengineered periodontal ligament and alveolar bone become clinical practice, or one day, entire teeth are bioengineered? Would it be possible to selectively differentiate stem cells into osteoblasts or osteoclasts by either static or cyclic forces? What is the new demand on orthodontic expertise with increasingly automated appliances? What will be the impact of the next generation of dental implants or rapid prototyped crowns on orthodontics? A century ago, Edward Angle’s practice of fixed appliances, along with other seminal contributions, such as functional appliances, established the profession of orthodontics. Today, the biophysical principles of orthodontics remain largely unchanged from Angle’s era, despite incremental refinements of brackets and wires. The paucity of fundamental innovations in orthodontics for decades presents intrinsic risks for the profession. This review will identify challenges for contemporary orthodontics and delineate strategies for the profession to evolve in an era of unprecedented scientific and technological advances, and serve as a call to action for the orthodontic profession. PMID:25018618

Cone Beam Computed Tomographic imaging in orthodontics.

Science.gov (United States)

Scarfe, W C; Azevedo, B; Toghyani, S; Farman, A G

2017-03-01

Over the last 15 years, cone beam computed tomographic (CBCT) imaging has emerged as an important supplemental radiographic technique for orthodontic diagnosis and treatment planning, especially in situations which require an understanding of the complex anatomic relationships and surrounding structures of the maxillofacial skeleton. CBCT imaging provides unique features and advantages to enhance orthodontic practice over conventional extraoral radiographic imaging. While it is the responsibility of each practitioner to make a decision, in tandem with the patient/family, consensus-derived, evidence-based clinical guidelines are available to assist the clinician in the decision-making process. Specific recommendations provide selection guidance based on variables such as phase of treatment, clinically-assessed treatment difficulty, the presence of dental and/or skeletal modifying conditions, and pathology. CBCT imaging in orthodontics should always be considered wisely as children have conservatively, on average, a three to five times greater radiation risk compared with adults for the same exposure. The purpose of this paper is to provide an understanding of the operation of CBCT equipment as it relates to image quality and dose, highlight the benefits of the technique in orthodontic practice, and provide guidance on appropriate clinical use with respect to radiation dose and relative risk, particularly for the paediatric patient. © 2017 Australian Dental Association.

Frequency of dentofacial asymmetries: a cross-sectional study on orthodontic patients.

Science.gov (United States)

Bhateja, Nita Kumari; Fida, Mubassar; Shaikh, Attiya

2014-01-01

Correction of orthodontic asymmetries is crucial to achieve functional occlusion, aesthetics and stability of post orthodontic treatment results. To date valid frequency data of dentofacial asymmetries in Pakistani orthodontic patients do not exist to document orthodontic treatment need. The objectives of this study were to determine frequency of dento-facial asymmetries, severity of dental asymmetries and to determine difference in frequency of dentofacial asymmetries in mixed and permanent dentition. The sample of this cross-sectional study comprised of 280 patients (177 females and 103 males) with no history of previous orthodontic treatment having no craniofacial anomalies. Dento-facial asymmetries were assessed from pre-treatment records of patients. Descriptive statistics were used to determine frequency of dentofacial asymmetries and severity of dental asymmetries. Chi-square test was used to determine difference in frequency of dentofacial asymmetries in mixed and permanent dentition. Seventy eight percent (219) of patients had noncoincident midlines, 67.5% (189) had mandibular midline asymmetry, 43.2% (122) had molar asymmetry, 15.7% (44) had mandibular arch asymmetry, 14.3% (40) had maxillary midline asymmetry, 13.6% (38) had maxillary arch asymmetry, 6.1% (17) had nose deviation, and 12.1% (34) had facial asymmetry and chin deviation. In most patients dental midlines were deviated from one another and from facial midline by ¼ lower incisor widths, while molar asymmetry was found in most patients by ¼ cusp width. Mandibular arch asymmetry was more frequent in permanent than mixed dentition (p = 0.054). Non-coincident dental midline is most commonly seen. Nose deviation is least commonly observed. Mandibular arch asymmetry is more frequent in permanent than mixed dentition.

Multifunctions of dual Zn/Mg ion co-implanted titanium on osteogenesis, angiogenesis and bacteria inhibition for dental implants.

Science.gov (United States)

Yu, Yiqiang; Jin, Guodong; Xue, Yang; Wang, Donghui; Liu, Xuanyong; Sun, Jiao

2017-02-01

In order to improve the osseointegration and long-term survival of dental implants, it is urgent to develop a multifunctional titanium surface which would simultaneously have osteogeneic, angiogeneic and antibacterial properties. In this study, a potential dental implant material-dual Zn/Mg ion co-implanted titanium (Zn/Mg-PIII) was developed via plasma immersion ion implantation (PIII). The Zn/Mg-PIII surfaces were found to promote initial adhesion and spreading of rat bone marrow mesenchymal stem cells (rBMSCs) via the upregulation of the gene expression of integrin α1 and integrin β1. More importantly, it was revealed that Zn/Mg-PIII could increase Zn 2+ and Mg 2+ concentrations in rBMSCs by promoting the influx of Zn 2+ and Mg 2+ and inhibiting the outflow of Zn 2+ , and then could enhance the transcription of Runx2 and the expression of ALP and OCN. Meanwhile, Mg 2+ ions from Zn/Mg-PIII increased Mg 2+ influx by upregulating the expression of MagT1 transporter in human umbilical vein endothelial cells (HUVECs), and then stimulated the transcription of VEGF and KDR via activation of hypoxia inducing factor (HIF)-1α, thus inducing angiogenesis. In addition to this, it was discovered that zinc in Zn/Mg-PIII had certain inhibitory effects on oral anaerobic bacteria (Pg, Fn and Sm). Finally, the Zn/Mg-PIII implants were implanted in rabbit femurs for 4 and 12weeks with Zn-PIII, Mg-PIII and pure titanium as controls. Micro-CT evaluation, sequential fluorescent labeling, histological analysis and push-out test consistently demonstrated that Zn/Mg-PIII implants exhibit superior capacities for enhancing bone formation, angiogenesis and osseointegration, while consequently increasing the bonding strength at bone-implant interfaces. All these results suggest that due to the multiple functions co-produced by zinc and magnesium, rapid osseointegration and sustained biomechanical stability are enhanced by the novel Zn/Mg-PIII implants, which have the potential

Thermotransduction and heat stress in dental structures during orthodontic debonding : Effectiveness of various cooling strategies.

Science.gov (United States)

Kley, Philipp; Frentzen, Matthias; Küpper, Katharina; Braun, Andreas; Kecsmar, Susann; Jäger, Andreas; Wolf, Michael

2016-05-01

Recent studies have indicated possible thermal damage to pulpal tissue during orthodontic debonding. This study aimed to analyze the thermal loads acting upon dental structures and their transfer to the pulp during orthodontic debonding. Specific goals were to analyze temperature changes in local dental tissues, thermotransduction to the pulp cavity, and the effectiveness of common cooling strategies and of simulated intrapulpal circulation. Metal brackets were bonded to five extracted human molars and subsequently removed. While a carbide bur was applied to debond the residual composite from the tooth surface, various cooling strategies (no/air/water cooling) were employed with or without simulated intrapulpal circulation, accompanied by temperature measurements with a thermographic infrared camera on the enamel surface and with measuring probes in the pulp cavity. Appropriate evaluation software was used to calculate the enamel-to-pulp temperature gradients and for statistical analysis. Significant differences in temperature rise and heat development over time, both on the enamel surfaces and in the pulp cavities were found. The mean temperature rises associated with no/air/water cooling were 90.7/46.6/9.2 °C on the enamel surface versus 9/8/4.6 °C inside the pulp. However, thermotransduction from enamel to pulp remained below 10 % of the surface measurements in all groups. Simulated intrapulpal microcirculation was found to significantly reduce intrapulpal temperature levels. During debonding of residual bracket adhesives, provided that a carbide bur is properly used, our data indicate a low risk of reaching critical intrapulpal temperatures even in the absence of dedicated cooling and no risk if the instrumentation is accompanied by air or water cooling.

Factors associated with the desire for orthodontic treatment among Brazilian adolescents and their parents

Science.gov (United States)

2009-01-01

Background In the period of adolescence physical appearance takes on significant importance in the construction of personal identity, including one's relationship with one's own body. A variety of social, cultural, psychological and personal factors influences the self-perception of dental appearance and the decision to undergo orthodontic treatment. Adolescents who seek orthodontic treatment are concerned with improving their appearance and social acceptance. The aim of the present study was to determine factors associated to the desire for orthodontic treatment among Brazilian adolescents and their parents. Methods The sample consisted of 403 subjects aged 14 to 18 years, selected randomly from a population of 182,291 schoolchildren in the same age group. The outcome variable "desire for orthodontic treatment" was assessed through a questionnaire. Self-perception of dental aesthetics was assessed using the Oral Aesthetic Subjective Impact Scale (OASIS) and the Dental Aesthetic Index (DAI) was used for clinical assessment. Statistical analysis involved the chi-square test as well as both simple and multiple logistic regression analyses. Results The majority (78%) of the Brazilian adolescents desired orthodontic treatment and 69% of the parents reported that their children were not in orthodontic treatment due to the high costs involved. There was significant association (p ≤ 0.05) between the desire for orthodontic treatment and most types of malocclusion. However, there was no significant association between the desire for orthodontic treatment and the variables gender and age. Conclusions The following were considered factors associated to the desire for treatment: upper anterior crowding ≥ 2 mm and parents' perception of their child's need for treatment. PMID:20021649

Authorship characteristics of orthodontic randomized controlled trials, systematic reviews, and meta-analyses in non-orthodontic journals with impact factor.

Science.gov (United States)

Alqaydi, Ahlam R; Kanavakis, Georgios; Naser-Ud-Din, Shazia; Athanasiou, Athanasios E

2017-12-08

This study was conducted to explore authorship characteristics and publication trends of all orthodontic randomized controlled trials (RCTs), systematic reviews (SRs), and meta-analyses (MAs) published in non-orthodontic journals with impact factor (IF). Appropriate research strategies were developed to search for all articles published until December 2015, without restrictions regarding language or publication status. The initial search generated 4524 results, but after application of the inclusion criteria, the final number of articles was reduced to 274 (SRs: 152; MAs: 36; and RCTs: 86). Various authorship characteristics were recorded for each article. Frequency distributions for all parameters were explored with Pearson chi-square for independence at the 0.05 level of significance. More than half of the included publications were SRs (55.5 per cent), followed by RCTs (31.4 per cent) and MAs (13.1 per cent); one hundred seventy-eight (65 per cent) appeared in dental journals and 96 (35 per cent) were published in non-dental journals. The last decade was significantly more productive than the period before 2006, with 236 (86.1 per cent) articles published between 2006 and 2015. European countries produced 51.5 per cent of the total number of publications, followed by Asia (18.6 per cent) and North America (USA and Canada; 16.8 per cent). Studies published in journals without IF were not included. Level-1 evidence orthodontic literature published in non-orthodontic journals has significantly increased during 2006-15. This indicates a larger interest of other specialty journals in orthodontic related studies and a trend for orthodontic authors to publish their work in journals with impact in broader fields of dentistry and medicine. © The Author(s) 2017. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

Assessment of the hardness of different orthodontic wires and brackets produced by metal injection molding and conventional methods

Directory of Open Access Journals (Sweden)

Shiva Alavi

2017-01-01

Conclusion: MIM orthodontic brackets exhibited hardness values much lower than those of SS orthodontic archwires and were more compatible with NiTi and beta-titanium archwires. A wide range of microhardness values has been reported for conventional orthodontic brackets and it should be considered that the manufacturing method might be only one of the factors affecting the mechanical properties of orthodontic brackets including hardness.

Periodontal Intervention in Speedy Orthodontics-A Case Report

Science.gov (United States)

Srivastava, Amitabh; Sharma, Ashish; Garg, Aarti; Kumar, Surubhi

2016-01-01

The use of orthodontic treatment in adult patients is becoming more common and these patients have more specific objectives and concerns related to facial and dental aesthetics, specially regarding duration of treatment. Dentists are on the lookout for techniques for increased efficiency in orthodontic treatment. Alveolar Corticotomy-assisted orthodontic treatment is a recent orthodontic technique that is recently gaining wide acceptance and is recorded as effective means of accelerating orthodontic treatment. A 17-year-old female patient was undergoing orthodontic treatment for the past one year but during her space closure, a visual examination confirmed a buccal thickening that was encountered in the buccal plate between premolars and canine. Periodontal intervention involved elective alveolar decortication in the form of dots performed around the teeth that were to be moved. This was carried out to induce a state of increased tissue turnover and a transient osteopenia, which further helps in faster rate of orthodontic tooth movement. Its main advantages are reduction of treatment time and post-orthodontic stability. PMID:26894189

Alignment Strategy for Constricted Maxillary Dental Arch in Patients With Unilateral Cleft Lip and Palate Using Fixed Orthodontic Appliance.

Science.gov (United States)

Park, Yoon-Hee; Park, Sumin; Baek, Seung-Hak

2018-03-01

The purpose of this study was to compare the alignment pattern of the constricted maxillary dental arch by fixed orthodontic treatment (FOT) in the well-aligned and constricted arches of unilateral cleft lip and palate (UCLP) patients. 19 UCLP patients were divided into Group 1 (well-aligned arch, n = 9) and Group 2 (constricted arch, n = 10). After the cephalometric and maxillary dental arch variables before (T1) and after FOT (T2) were measured, statistical analysis was performed. There were no significant differences in the surgical timing of cheiloplasty, palatoplasty, and secondary alveolar bone grafting and in the surgical method of cheiloplasty between the 2 groups. However, Group 2 had a higher percentage of palatoplasty method, which could leave the denuded bone for secondary healing than Group 1 (P dental arch compared to Group 1 at the T1 stage (inter-second premolar width, greater segment angle [GSA], and lesser segment angle [LSA], all P dental arch shape, different strategy is necessary to obtain proper alignment by FOT.

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies.

Science.gov (United States)

Lara, Tulio Silva; Lancia, Melissa; da Silva Filho, Omar Gabriel; Garib, Daniela Gamba; Ozawa, Terumi Okada

2013-01-01

To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment plan accomplished; and associated dental anomalies. The frequency of dental anomalies in the sample was compared to reference values for the general population using the chi-square test, with a significance level set at 5%. The prevalence of mesiodens was 1.5% more common among males (1.5:1). Most of the mesiodens were non-erupted (75%) and in a vertical position, facing the oral cavity. Extraction of the mesiodens was the most common treatment. The main complications associated with mesiodens were: delayed eruption of permanent incisors (34.28%) and midline diastema (28.57%). From all the dental anomalies analyzed, only the prevalence of maxillary lateral incisor agenesis was higher in comparison to the general population. There was a low prevalence of mesiodens (1.5%) in deciduous and mixed dentition and the condition was not associated with other dental anomalies, except for the maxillary lateral incisor agenesis.

Corrosion of orthodontic brackets in different spices: in vitro study.

Science.gov (United States)

Chaturvedi, T P

2014-01-01

Moist environment in the mouth varies and causes variable amounts of corrosion of dental materials. This is of concern particularly when metallic implants, metallic fillings, orthodontic appliances are placed in the hostile electrolytic environment in the human mouth. Components of diet rich in salt and spices are important factors influencing the corrosion of metallic appliances placed in the oral cavity. To study in vitro corrosion of orthodontic metallic brackets immersed in solutions of salt and spices in artificial saliva. Orthodontic brackets were used for corrosion studies in artificial saliva, salt, and spices using electrochemical technique and surface analysis. Electrochemical studies using different parameters were done in solutions of artificial saliva containing salt and spices. Photomicrographs from the optical microscope were also obtained. RESULTS of corrosion studies have clearly demonstrated that certain spices such as turmeric and coriander are effective in reducing corrosion, whereas salt and red chili have been found to enhance it. Surface analysis of small pits present on the surface of the as-received bracket will initiate corrosion which leads to more pitting.

Factors affecting dental biofilm in patients wearing fixed orthodontic appliances.

Science.gov (United States)

Mei, Li; Chieng, Joyce; Wong, Connie; Benic, Gareth; Farella, Mauro

2017-12-01

The aim of this study is to investigate the amount and the distribution of biofilm in patients wearing fixed appliances and its relation with age, gender, frequency of tooth brushing, and patient motivation. The sample comprised 52 patients (15.5 ± 3.6 years old, 30 females and 22 males) wearing fixed orthodontic appliances. Dental biofilm was assessed using a modified plaque index (PI). A questionnaire was used to collect patient's information, including gender, age, treatment motivation, and frequency of tooth brushing. Gingival (PI score = 0.9 ± 0.7), mesial (0.8 ± 0.6), and distal (0.8 ± 0.5) areas accumulated more biofilm than occlusal areas (0.3 ± 0.3) (P appliances have the highest biofilm accumulation on the maxillary lateral incisors and maxillary canines, particularly in the gingival area and areas behind arch wires. Less biofilm was observed in female and adult patients and in those who were self-motivated and brushed their teeth more often.

SURGICAL ORTHODONTICS: LITERATURE REVIEW AND CASE REPORT

OpenAIRE

Piyush HEDA; Babita RAGHUWANSHI; Amit PRAKASH; Kishore SONAWANE

2013-01-01

Orthognathic surgery is a surgical procedure largely practiced throughout the world for the correction of various maxillofacial deformities. The procedure for correcting a particular deformity will be done after proper evaluation, which includes cephalometric, dental model analysis and photographs. The patient undergoes pre-surgical orthodontic correction for dental compensation, after which surgery is planned. During the last few decades, the profession has witnessed ...

[Orthodontic treatment of patients medicated with bisphosphonates-a clinical case report].

Science.gov (United States)

Krieger, Elena; d'Hoedt, Bernd; Scheller, Herbert; Jacobs, Collin; Walter, Christian; Wehrbein, Heinrich

2013-01-01

Bisphosphonates (BP) are an established medication, e.g., for the prevention/therapy of osteoporosis. The effects of the changed bone metabolism for orthodontic treatments are unknown. A 66-year-old woman underwent a total oral rehabilitation. The therapy included (1) tooth extractions, (2) periodontal treatment, (3) insertion of dental implants, (4) provisional implant restorations, (5) orthodontic treatment, and (6) definite implant restorations. The orthodontic tooth movements were in- and retrusion of the upper frontal teeth, intrusion of the lower front teeth, using the dental implants as skeletal anchorage. After implant insertion and one month before beginning the orthodontic treatment, osteoporosis was diagnosed in this patient and, without notification to our facility, BP treatment was initiated by her general practitioner (alendronate oral, 70 mg/week), with an overall duration of intake of 7 months. After 13 months, the orthodontic treatment was successfully accomplished; however enlarged periodontal gaps, sclerotic bone areas, and mild apical root resorptions of the upper frontal teeth were found in this patient. Currently, there are no recommendations for orthodontic patients undergoing BP therapy. Orthodontic tooth movement in this low-risk patient with a short duration of intake and a low-dose BP medication was possible. Because of the reduced bone metabolism and the higher amount of side effects, the treatment should be performed with extremely light forces and frequent monitoring.

Periodontal ligament formation around different types of dental titanium implants. I. The self-tapping screw type implant system

DEFF Research Database (Denmark)

Warrer, K; Karring, T; Gotfredsen, K

1993-01-01

The aim of this study was to determine if a periodontal ligament can form around self-tapping, screw type titanium dental implants. Implants were inserted in contact with the periodontal ligament of root tips retained in the mandibular jaws of 7 monkeys. In each side of the mandible, 1 premolar......, a periodontal ligament can form on self-tapping, screw type titanium dental implants in areas where a void is present between the surrounding bone and the implant at the time of insertion....... and 2 molars were removed in such a manner that in approximately half the cases, the root tips were retained. Following healing, the experimental areas were examined on radiographs, and sites were selected for the insertion of the implants, so that every second implant would have a close contact...

Normative and self-perceived orthodontic treatment need in Nigerian school children.

Science.gov (United States)

Ajayi, Emmanuel Olubusayo

2015-07-01

The aim of this study was to assess the normative and self-perceived need for orthodontic treatment in Nigerian children, and to evaluate distribution of orthodontic treatment need according to gender and age. The sample consisted of 441 randomly selected school children, aged 11-18 years in Benin City, Nigeria. The subjects were further sub-grouped according to gender (229 males and 212 females) and age (246 11-13 years old and 195 14-18 years old). The Dental health Component (DHC) and Aesthetic Component (AC) of Index of Orthodontic Treatment Need (IOTN) were used to assess orthodontic treatment need normatively. Self-perceived need was evaluated by asking the subjects to rate their dental aesthetics on the Aesthetic Component scale of IOTN. Chi-square tests were used to evaluate gender and age differences in distribution of treatment need. A definite need for orthodontic treatment was found among 21.5% (grades 4-5 of DHC) and 6.3% (grades 8-10 of AC) of the subjects; 3.9% of the subjects perceived a definite need for orthodontic treatment (grades 8-10 of AC). There were no statistically significant gender and age differences in distribution of orthodontic treatment need among the subjects (p > 0.05). The study revealed a need for orthodontic treatment in slightly more than one fifth (21.5%) of this sample of Nigerian children. The sample population has a lower need on aesthetic grounds and their normative and self-perceived orthodontic treatment needs were not influenced by gender and age.

Clinical bending of nickel titanium wires

Directory of Open Access Journals (Sweden)

Stephen Chain

2015-01-01

Full Text Available Since the evolution and the involvement of Nickel Titanium wires in the field of Orthodontics. The treatment plan has evolved with the use of low force Nickel Titanium wires. Because of their high springback, low stiffness, they are the key initial wires in leveling and alignment but have poor formability. Since poor formability limits its ability to create variable arch forms thus; limits the form of treatment. We have devised a method to bend the Nickel Titanium wires to help in our inventory but also customized the wire according to the treatment.

The management of traumatic ankylosis during orthodontics: a case report.

LENUS (Irish Health Repository)

McNamara, T G

2000-01-01

Dental ankylosis may be a significant complication in orthodontic clinical practice. This case report describes the management of a malocclusion, complicated by an ankylosed maxillary central incisor, which arose during orthodontic treatment, following an acute traumatic injury. The use of the ankylosed incisor in successfully managing the significant Class II division 1 malocclusion is described.

Cytokines and VEGF Induction in Orthodontic Movement in Animal Models

Directory of Open Access Journals (Sweden)

M. Di Domenico

2012-01-01

Full Text Available Orthodontics is a branch of dentistry that aims at the resolution of dental malocclusions. The specialist carries out the treatment using intraoral or extraoral orthodontic appliances that require forces of a given load level to obtain a tooth movement in a certain direction in dental arches. Orthodontic tooth movement is dependent on efficient remodeling of periodontal ligament and alveolar bone, correlated with several biological and mechanical responses of the tissues surrounding the teeth. A periodontal ligament placed under pressure will result in bone resorption whereas a periodontal ligament under tension results in bone formation. In the primary stage of the application of orthodontic forces, an acute inflammation occurs in periodontium. Several proinflammatory cytokines are produced by immune-competent cells migrating by means of dilated capillaries. In this paper we summarize, also through the utilization of animal models, the role of some of these molecules, namely, interleukin-1β and vascular endothelial growth factor, that are some proliferation markers of osteoclasts and osteoblasts, and the macrophage colony stimulating factor.

The Role of Hypoxia in Orthodontic Tooth Movement

Directory of Open Access Journals (Sweden)

A. Niklas

2013-01-01

Full Text Available Orthodontic forces are known to have various effects on the alveolar process, such as cell deformation, inflammation, and circulatory disturbances. Each of these conditions affecting cell differentiation, cell repair, and cell migration, is driven by numerous molecular and inflammatory mediators. As a result, bone remodeling is induced, facilitating orthodontic tooth movement. However, orthodontic forces not only have cellular effects but also induce vascular changes. Orthodontic forces are known to occlude periodontal ligament vessels on the pressure side of the dental root, decreasing the blood perfusion of the tissue. This condition is accompanied by hypoxia, which is known to either affect cell proliferation or induce apoptosis, depending on the oxygen gradient. Because upregulated tissue proliferation rates are often accompanied by angiogenesis, hypoxia may be assumed to fundamentally contribute to bone remodeling processes during orthodontic treatment.

Interlot variations of transition temperature range and force delivery in copper-nickel-titanium orthodontic wires.

Science.gov (United States)

Pompei-Reynolds, Renée C; Kanavakis, Georgios

2014-08-01

The manufacturing process for copper-nickel-titanium archwires is technique sensitive. The primary aim of this investigation was to examine the interlot consistency of the mechanical properties of copper-nickel-titanium wires from 2 manufacturers. Wires of 2 sizes (0.016 and 0.016 × 0.022 in) and 3 advertised austenite finish temperatures (27°C, 35°C, and 40°C) from 2 manufacturers were tested for transition temperature ranges and force delivery using differential scanning calorimetry and the 3-point bend test, respectively. Variations of these properties were analyzed for statistical significance by calculating the F statistic for equality of variances for transition temperature and force delivery in each group of wires. All statistical analyses were performed at the 0.05 level of significance. Statistically significant interlot variations in austenite finish were found for the 0.016 in/27°C (P = 0.041) and 0.016 × 0.022 in/35°C (P = 0.048) wire categories, and in austenite start for the 0.016 × 0.022 in/35°C wire category (P = 0.01). In addition, significant variations in force delivery were found between the 2 manufacturers for the 0.016 in/27°C (P = 0.002), 0.016 in/35.0°C (P = 0.049), and 0.016 × 0.022 in/35°C (P = 0.031) wires. Orthodontic wires of the same material, dimension, and manufacturer but from different production lots do not always have similar mechanical properties. Clinicians should be aware that copper-nickel-titanium wires might not always deliver the expected force, even when they come from the same manufacturer, because of interlot variations in the performance of the material. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Orthodontic treatment for a patient with hereditary angiodema: a case report.

Science.gov (United States)

Waldon, Kate; Barber, Sophy Kathleen; Spencer, Richard James

2015-05-01

Hereditary angiodema (HAE), also known as C1 esterase inhibitor deficiency, causes sufferers to experience episodic subcutaneous and submucosal oedema. These episodes can be triggered by dental treatment and manifest as life-threatening oedematous swelling in the head and neck region. This case report reviews an adolescent with hereditary angiodema whose malocclusion required orthodontic intervention. Due to her complex and unpredictable reaction to dental treatment, various options were explored before determining the appropriate care pathway for this patient. Trial placement of a sectional fixed appliance tested the tissue reaction prior to comprehensive treatment including extractions and fixed orthodontic appliances. This report demonstrates successful interdisciplinary management facilitating orthodontic care in a patient with HAE. © 2014 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Factors associated with the desire for orthodontic treatment among Brazilian adolescents and their parents

Directory of Open Access Journals (Sweden)

Filogônio Cintia B

2009-12-01

Full Text Available Abstract Background In the period of adolescence physical appearance takes on significant importance in the construction of personal identity, including one's relationship with one's own body. A variety of social, cultural, psychological and personal factors influences the self-perception of dental appearance and the decision to undergo orthodontic treatment. Adolescents who seek orthodontic treatment are concerned with improving their appearance and social acceptance. The aim of the present study was to determine factors associated to the desire for orthodontic treatment among Brazilian adolescents and their parents. Methods The sample consisted of 403 subjects aged 14 to 18 years, selected randomly from a population of 182,291 schoolchildren in the same age group. The outcome variable "desire for orthodontic treatment" was assessed through a questionnaire. Self-perception of dental aesthetics was assessed using the Oral Aesthetic Subjective Impact Scale (OASIS and the Dental Aesthetic Index (DAI was used for clinical assessment. Statistical analysis involved the chi-square test as well as both simple and multiple logistic regression analyses. Results The majority (78% of the Brazilian adolescents desired orthodontic treatment and 69% of the parents reported that their children were not in orthodontic treatment due to the high costs involved. There was significant association (p ≤ 0.05 between the desire for orthodontic treatment and most types of malocclusion. However, there was no significant association between the desire for orthodontic treatment and the variables gender and age. Conclusions The following were considered factors associated to the desire for treatment: upper anterior crowding ≥ 2 mm and parents' perception of their child's need for treatment.

Tooth angulation and dental arch perimeter-the effect of orthodontic bracket prescription.

Science.gov (United States)

Pontes, Luana F; Cecim, Rodolpho L; Machado, Sissy M; Normando, David

2015-08-01

The aim of this study was to evaluate the effects of upper incisors and canine angulations introduced by different bracket prescriptions on dental arch perimeter. Cone beam computerized tomography scans collected using I-Cat (Imaging Sciences International, Hatfield, PA, USA) were selected conveniently from a database of routine exams of a clinical radiology center. Crown and radicular measurements of upper incisors and canines were made and exported to the Autocad 2011 software to create a virtual dental model. The virtual teeth were positioned with an angulation of zero; thereafter, a reference value for the perimeter of the arch was measured. Furthermore, teeth angulations were applied according to the standards of the Edgewise bracket system and the Straight-wire systems: MBT, Capelozza, Andrews, and Roth. The largest linear distances for tooth crown (anterior arch perimeter) and root (radicular distance) were obtained for each bracket prescription. The anterior perimeter for well-aligned incisors and canines without angulation was used as reference (crown: 47.34mm; root: 39.13mm). An increase in the arch perimeter was obtained for all bracket prescriptions evaluated, which ranged from 0.28 and 3.19mm in the Edgewise technique, for the crown and root measurements, respectively, to 1.09 and 11.28mm for the Roth prescription. Bracket prescriptions with greater angulation led to an increased use of space within the dental arch, mainly in the radicular region. The consequence of this radicular angular displacement will need to be further investigated. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up.

Science.gov (United States)

Tunchel, Samy; Blay, Alberto; Kolerman, Roni; Mijiritsky, Eitan; Shibli, Jamil Awad

2016-01-01

This prospective 3-year follow-up clinical study evaluated the survival and success rates of 3DP/AM titanium dental implants to support single implant-supported restorations. After 3 years of loading, clinical, radiographic, and prosthetic parameters were assessed; the implant survival and the implant-crown success were evaluated. Eighty-two patients (44 males, 38 females; age range 26-67 years) were enrolled in the present study. A total of 110 3DP/AM titanium dental implants (65 maxilla, 45 mandible) were installed: 75 in healed alveolar ridges and 35 in postextraction sockets. The prosthetic restorations included 110 single crowns (SCs). After 3 years of loading, six implants failed, for an overall implant survival rate of 94.5%; among the 104 surviving implant-supported restorations, 6 showed complications and were therefore considered unsuccessful, for an implant-crown success of 94.3%. The mean distance between the implant shoulder and the first visible bone-implant contact was 0.75 mm (±0.32) and 0.89 (±0.45) after 1 and 3 years of loading, respectively. 3DP/AM titanium dental implants seem to represent a successful clinical option for the rehabilitation of single-tooth gaps in both jaws, at least until 3-year period. Further, long-term clinical studies are needed to confirm the present results.

3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up

Directory of Open Access Journals (Sweden)

Samy Tunchel

2016-01-01

Full Text Available This prospective 3-year follow-up clinical study evaluated the survival and success rates of 3DP/AM titanium dental implants to support single implant-supported restorations. After 3 years of loading, clinical, radiographic, and prosthetic parameters were assessed; the implant survival and the implant-crown success were evaluated. Eighty-two patients (44 males, 38 females; age range 26–67 years were enrolled in the present study. A total of 110 3DP/AM titanium dental implants (65 maxilla, 45 mandible were installed: 75 in healed alveolar ridges and 35 in postextraction sockets. The prosthetic restorations included 110 single crowns (SCs. After 3 years of loading, six implants failed, for an overall implant survival rate of 94.5%; among the 104 surviving implant-supported restorations, 6 showed complications and were therefore considered unsuccessful, for an implant-crown success of 94.3%. The mean distance between the implant shoulder and the first visible bone-implant contact was 0.75 mm (±0.32 and 0.89 (±0.45 after 1 and 3 years of loading, respectively. 3DP/AM titanium dental implants seem to represent a successful clinical option for the rehabilitation of single-tooth gaps in both jaws, at least until 3-year period. Further, long-term clinical studies are needed to confirm the present results.

Influence of metal dental materials on MR imaging

Energy Technology Data Exchange (ETDEWEB)

Tsuchihashi, Toshio; Chiba, Michiko; Yoshizawa, Satoshi; Sasaki, Sadayuki; Maki, Toshio; Kitagawa, Matsuo; Suzuki, Takeshi [Nippon Medical School, Tokyo (Japan). Main Hospital; Nakata, Minoru; Fujita, Isao

1998-11-01

Differences in magnetic susceptibility produce artifacts and signal loss in magnetic resonance imaging (MRI). This study was undertaken to compare the degree of artifacts on MRI caused by metallic dental materials. The influence on MRI of six types of dental alloys, a dental implant, orthodontic appliance, and magnetic attachment was investigated. Among the dental metals, nickel-chromium alloy and cobalt-chromium alloy, which have ferromagnetism, caused significant metal artifacts. Gold-platinum alloy, gold-silver-palladium alloy, silver alloy, and amalgam alloy produced slight metal artifacts. The orthodontic appliance mainly consisted of iron, and the keeper for its magnetic attachment was made of stainless steel. For these reasons, marked metal artifacts and signal loss could be seen in both of them owing to their ferromagnetism. These results suggest that orthodontic appliances and magnetic attachments impair evaluation of the GRE and EPI techniques. It is therefore preferable to use predominantly diamagnetic or paramagnetic dental materials for MRI of the head and neck. Removable keepers should be used more widely to prevent metal artifacts and enhance safety on MRI. (author)

Influence of metal dental materials on MR imaging

International Nuclear Information System (INIS)

Tsuchihashi, Toshio; Chiba, Michiko; Yoshizawa, Satoshi; Sasaki, Sadayuki; Maki, Toshio; Kitagawa, Matsuo; Suzuki, Takeshi; Nakata, Minoru; Fujita, Isao

1998-01-01

Differences in magnetic susceptibility produce artifacts and signal loss in magnetic resonance imaging (MRI). This study was undertaken to compare the degree of artifacts on MRI caused by metallic dental materials. The influence on MRI of six types of dental alloys, a dental implant, orthodontic appliance, and magnetic attachment was investigated. Among the dental metals, nickel-chromium alloy and cobalt-chromium alloy, which have ferromagnetism, caused significant metal artifacts. Gold-platinum alloy, gold-silver-palladium alloy, silver alloy, and amalgam alloy produced slight metal artifacts. The orthodontic appliance mainly consisted of iron, and the keeper for its magnetic attachment was made of stainless steel. For these reasons, marked metal artifacts and signal loss could be seen in both of them owing to their ferromagnetism. These results suggest that orthodontic appliances and magnetic attachments impair evaluation of the GRE and EPI techniques. It is therefore preferable to use predominantly diamagnetic or paramagnetic dental materials for MRI of the head and neck. Removable keepers should be used more widely to prevent metal artifacts and enhance safety on MRI. (author)

Cytocompatibility, cytotoxicity and genotoxicity analysis of dental implants

Science.gov (United States)

Reigosa, M.; Labarta, V.; Molinari, G.; Bernales, D.

2007-11-01

Several types of materials are frequently used for dental prostheses in dental medicine. Different treatments with titanium are the most used. The aim of the present study was to analyze by means of cytotoxicity and cytocompatibility techniques the capacity of dental implants to integrate to the bone tissue. Cultures of UMR 106 cell line derived from an osteosarcoma were used for bioassays mainly because they show many of the properties of osteoblasts. Dental implant samples provided by B&W company were compared with others of recognized trademarks. The first ones contain ASTM titanium (8348 GR2) with acid printing. Cytotoxicity was analyzed by means of lysosome activity, using the neutral red technique and alkaline phosphatase enzyme activity. Cell variability was determined by means of the acridine ethidium-orange bromide technique. One-way ANOVA and Bonferroni and Duncan post-ANOVA tests were used for the statistical analysis. The assays did not show significant differences among the dental implants analyzed. Our findings show that the dental prostheses studied present high biocompatibility, quantified by the bioassays performed. The techniques employed revealed that they can be a useful tool for the analysis of other materials for dental medicine use.

Cytocompatibility, cytotoxicity and genotoxicity analysis of dental implants

International Nuclear Information System (INIS)

M, Reigosa; V, Labarta; G, Molinari; D, Bernales

2007-01-01

Several types of materials are frequently used for dental prostheses in dental medicine. Different treatments with titanium are the most used. The aim of the present study was to analyze by means of cytotoxicity and cytocompatibility techniques the capacity of dental implants to integrate to the bone tissue. Cultures of UMR 106 cell line derived from an osteosarcoma were used for bioassays mainly because they show many of the properties of osteoblasts. Dental implant samples provided by B and W company were compared with others of recognized trademarks. The first ones contain ASTM titanium (8348 GR2) with acid printing. Cytotoxicity was analyzed by means of lysosome activity, using the neutral red technique and alkaline phosphatase enzyme activity. Cell variability was determined by means of the acridine ethidium-orange bromide technique. One-way ANOVA and Bonferroni and Duncan post-ANOVA tests were used for the statistical analysis. The assays did not show significant differences among the dental implants analyzed. Our findings show that the dental prostheses studied present high biocompatibility, quantified by the bioassays performed. The techniques employed revealed that they can be a useful tool for the analysis of other materials for dental medicine use

Interdisciplinary Treatment of an Adult Patient Using an Adjunctive Orthodontic Approach. Case Report

Directory of Open Access Journals (Sweden)

Rugina Roxana

2017-03-01

Full Text Available The aim of this case presentation is to outline some of the advantages that an adjunct orthodontic treatment can offer in a comprehensive oral rehabilitation of an adult patient. Adjunctive orthodontic treatment is usually limited to a dental arch or to a group of teeth within an arch. The purpose of dental movements in this case will be to position the teeth in a way that makes the restoration or replacement of damaged or missing teeth as easy as possible and with minimal dental tissue sacrifice. In addition, the improved position of the teeth will create a healthier periodontal environment that is easier to maintain over time.

Differences of protein profile before and after orthodontic treatment

Science.gov (United States)

Nasri, Farah Amirah Mohd; Wahab, Rohaya Megat Abdul; Karsani, Saiful Anuar; Ariffin, Shahrul Hisham Zainal

2016-11-01

Mechanical forces in orthodontic treatment used to treat malocclusion can cause inflamed gingival tissue and the process of tooth movement may resorb dental root. Root resorption is an iatrogenic effect of orthodontic treatment but it can be monitored using protein biomarker. This study aims to investigate the differences of protein profile before and after orthodontic treatment using different staining methods. Human gingival crevicular fluid and saliva were collected from orthodontic patients before and after treatment. Protein profile were observed using SDS-PAGE. Our study shows down regulation of proteins after 3 months of treatment. Hence, there are potential values from this study to aid in investigation for specific biomarkers for root resorption.

Eastern Health Board Regional Orthodontic Service: an initial audit.

LENUS (Irish Health Repository)

Dowling, P A

1997-01-01

This initial audit of 600 recently assessed Eastern Health Board orthodontic patients suggests that a large number of them (47 per cent) requires referral for routine restorative and preventive dental care. Closer links are needed with general dental practitioners and community dental surgeons to resolve these needs. The trend for a high referral of females and Class 11 Division 1 malocclusion type correlated well with studies in other countries.

Enhancement of Orthodontic Anchor Screw Stability Under Immediate Loading by Ultraviolet Photofunctionalization Technology.

Science.gov (United States)

Takahashi, Maiko; Motoyoshi, Mitsuru; Inaba, Mizuki; Hagiwara, Yoshiyuki; Shimizu, Noriyoshi

Ultraviolet (UV)-mediated photofunctionalization technology is intended to enhance the osseointegration capability of titanium implants. There are concerns about orthodontic anchor screws loosening under immediate loading protocols in adolescent orthodontic treatment. The purpose of this in vivo study was to evaluate the effects of photofunctionalization on the intrabony stability of orthodontic titanium anchor screws and bone-anchor screw contact under immediate loading in growing rats. Custom-made titanium anchor screws (1.4 mm in diameter and 4.0 mm in length) with or without photofunctionalization pretreatment were placed on the proximal epiphysis of the tibial bone in 6-week-old male Sprague-Dawley rats and were loaded immediately after placement. After 2 weeks of loading, the stability of the anchor screws was evaluated using a Periotest device, and the bone-anchor screw contact ratio (BSC) was assessed by a histomorphometric analysis using field-emission scanning electron microscopy. In the unloaded group, Periotest values (PTVs) were ~25 for UV-untreated screws and 13 for UVtreated screws (P < .01), while in the immediate-loading group, PTVs were 28 for UV-untreated screws and 16 for UV-treated screws (P < .05). Significantly less screw mobility was observed in both UV-treated groups regardless of the loading protocol. The BSC was increased ~1.8 fold for UV-treated screws, compared with UV-untreated screws, regardless of the loading protocol. Photofunctionalization enhanced the intrabony stability of orthodontic anchor screws under immediate loading in growing rats by increasing bone-anchor screw contact.

Characterization and coating stability evaluation of nickel-titanium orthodontic esthetic wires: an in vivo study.

Science.gov (United States)

Argalji, Nina; Silva, Eduardo Moreira da; Cury-Saramago, Adriana; Mattos, Claudia Trindade

2017-08-21

The objective of this study was to compare coating dimensions and surface characteristics of two different esthetic covered nickel-titanium orthodontic rectangular archwires, as-received from the manufacturer and after oral exposure. The study was designed for comparative purposes. Both archwires, as-received from the manufacturer, were observed using a stereomicroscope to measure coating thickness and inner metallic dimensions. The wires were also exposed to oral environment in 11 orthodontic active patients for 21 days. After removing the samples, stereomicroscopy images were captured, coating loss was measured and its percentage was calculated. Three segments of each wire (one as-received and two after oral exposure) were observed using scanning electron microscopy for a qualitative analysis of the labial surface of the wires. The Lilliefors test and independent t-test were applied to verify normality of data and statistical differences between wires, respectively. The significance level adopted was 0.05. The results showed that the differences between the wires while comparing inner height and thickness were statistically significant (p wire presented a coating thickness twice that of the control wire, which was also a statistically significant difference. The coating loss percentage was also statistically different (p = 0.0346) when the latest launched wire (13.27%) was compared to the control (29.63%). In conclusion, the coating of the most recent wire was thicker and more uniform, whereas the control had a thinner coating on the edges. After oral exposure, both tested wires presented coating loss, but the most recently launched wire exhibited better results.

The prevalence of malocclusion and orthodontic treatment needs in school going children of Nalagarh, Himachal Pradesh, India.

Science.gov (United States)

Singh, Sarabjeet; Sharma, Abhishek; Sandhu, Navreet; Mehta, Kavita

2016-01-01

The aim of this study was to determine the prevalence of malocclusion and orthodontic treatment need in 13-18-year-old schoolchildren of Nalagarh, Himachal Pradesh, India using the Index of Orthodontic Treatment need (IOTN) and to analyze the treatment needs between males and females and correlation between the esthetic component (AC) and dental health component (DHC) of IOTN. The sample comprised 2000 school children (1125 females and 875 males) who had not undergone orthodontic treatment. No radiographs, study casts, were used; IOTN was calculated from clinical examination. DHC results showed that little need for orthodontic treatment was found in 31.6% and moderate need in 30.85%. A great need was estimated at 37.55%. Severe contact point displacement of more than 4 mm was the most common occlusal feature in the definite treatment need group, followed by increased overjet, impeded eruption of teeth, and anterior or posterior cross bite. AC results showed that little need for orthodontic treatment was in 86.15%, moderate need in 8.90%, and great need in 4.95%. Index does not consider midline discrepancy, soft tissue abnormalities, and AC does not include Class III and Class II div 2 malocclusion photographs. There seems a discrepancy in the proportion of children needing orthodontic treatment on esthetic and dental health grounds. This study provides baseline data on the need and demand for orthodontic treatment among the sample which is important for planning public orthodontic and dental services.

Myths and realities in orthodontics.

Science.gov (United States)

Fleming, P S; Springate, S D; Chate, R A C

2015-02-16

Comprehensive orthodontic treatment typically comprises an initial phase of alignment over a period of four to six months, followed by vertical, transverse and antero-posterior corrections, space closure, finishing and detailing to enhance dental and facial aesthetics and function. Each course of treatment involves a series of decisions and alternatives relating to objectives, appliance design and treatment mechanics. In recent years there has been increasing interest in short-term approaches to treatment with more limited objectives and the avoidance of phases traditionally considered integral to successful treatment. In this review the veracity of accepted truths in orthodontics are discussed; specifically, the importance of initial molar relationship, final incisor relationship, the merits of orthodontic extractions, anticipated treatment times, the value of modern fixed appliance systems, the importance of torque expression and the relative merits of bonded retainers and inter-proximal reduction are considered.

Gender equality in orthodontic literature and leadership in the United States.

Science.gov (United States)

Dragstrem, Kristina G; Yuan, Judy Chia-Chun; Lee, Damian J; Sukotjo, Cortino; Galang, Maria Therese

2012-01-01

The objective of this study was to evaluate gender equality in orthodontics by reviewing the authorship in three orthodontic journals in addition to the involvement of women in leadership roles within orthodontic organizations and academia in the United States. Three journals representing orthodontics were selected to analyze the author demographics for the years 1986, 1990, 1995, 2000, 2005, and 2008. Inclusion criteria were at least one first or last author with a dental degree whose primary affiliation was in the United States. Female leadership was assessed in three orthodontic organizations as well as orthodontic program directorship. Overall, the percentage of female first authors increased significantly from 0% to 18% in the years studied (P = .004). The change of the percentage of female last authors was not statistically significant (P = .719). The participation of women in leadership roles within orthodontic organizations and in orthodontic program director positions has been limited. Within the limitations of this study, it was concluded that women are underrepresented in orthodontic authorship and leadership.

Orthodontics-surgical combination therapy for Class III skeletal malocclusion

Directory of Open Access Journals (Sweden)

M S Ravi

2012-01-01

Full Text Available The correction of skeletal Class III malocclusion with severe mandibular prognathism in an adult individual requires surgical and Othodontic combination therapy. The inter disciplinary approach is the treatment of choice in most of the skeletal malocclusions. A case report of an adult individual with Class III malocclusion, having mandibular excess in sagittal and vertical plane and treated with orthodontics,, bilateral sagittal split osteotomy and Le - Forte I osteotomy for the correction of skeletal, dental and soft tissue discrepancies is herewith presented. The surgical-orthodontic combination therapy has resulted in near-normal skeletal, dental and soft tissue relationship, with marked improvement in the facial esthetics in turn, has helped the patient to improve the self-confidence level.

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies

Directory of Open Access Journals (Sweden)

Tulio Silva Lara

2013-12-01

Full Text Available OBJECTIVE: To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. MATERIAL AND METHODS: Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender ; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment plan accomplished; and associated dental anomalies. The frequency of dental anomalies in the sample was compared to reference values for the general population using the chi-square test (c², with a significance level set at 5%. RESULTS: The prevalence of mesiodens was 1.5% more common among males (1.5:1. Most of the mesiodens were non-erupted (75% and in a vertical position, facing the oral cavity. Extraction of the mesiodens was the most common treatment. The main complications associated with mesiodens were: delayed eruption of permanent incisors (34.28% and midline diastema (28.57%. From all the dental anomalies analyzed, only the prevalence of maxillary lateral incisor agenesis was higher in comparison to the general population. CONCLUSION: There was a low prevalence of mesiodens (1.5% in deciduous and mixed dentition and the condition was not associated with other dental anomalies, except for the maxillary lateral incisor agenesis.

21 CFR 872.3640 - Endosseous dental implant.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Endosseous dental implant. 872.3640 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3640 Endosseous dental implant. (a) Identification. An endosseous dental implant is a device made of a material such as titanium or titanium alloy, that...

Use of miniplates as a method for orthodontic anchorage: a case report.

Science.gov (United States)

Peres, Fernando Gianzanti; Padovan, Luis Eduardo Marques; Kluppel, Leandro Eduardo; Albuquerque, Gustavo Calvalcanti; Souza, Paulo Cesar Ulson de; Claudino, Marcela

2016-01-01

Temporary anchorage devices (TADs) have been developed to be used as direct adjuncts in orthodontic treatment and have facilitated treatment of more complex orthodontic cases, including patients with dental impaction. This clinical case reports the applicability of TADs in the orthodontic treatment of a patient with impacted mandibular second molars. Surgical and orthodontic procedures related to the use of miniplates were also discussed in this study. The use of temporary anchorage devices, such as miniplates, can be suggested as an alternative to treat patients with impacted mandibular second molars.

Quality of life and psychosocial outcomes after fixed orthodontic treatment: a 17-year observational cohort study.

Science.gov (United States)

Arrow, Peter; Brennan, David; Spencer, A John

2011-12-01

There is little evidence to suggest that orthodontic treatment can prevent or reduce the likelihood of dental caries or of periodontal disease or dental trauma and temporomandibular disorders, but there is a modest association between the presence of malocclusion/orthodontic treatment need and quality of life. However, little is known of the long-term outcomes of orthodontic treatment. This study reports on the longitudinal follow-up of quality of life and psychosocial outcomes of orthodontic treatment among a cohort of adults who were examined as adolescents in 1988/1989. Children who were examined in 1988/1989 were invited to a follow-up in 2005/2006. Respondents completed a questionnaire, which collected information on quality of life, receipt of orthodontic treatment and psychosocial factors, and were invited for a clinical examination. Oral health conditions including occlusal status using the Dental Aesthetic Index were recorded. Analysis of variance and multiple linear regression were used to examine the relationship between the measured factors. There was no statistically significant association between occlusal status at adolescence and quality of life at adulthood. Those individuals who had orthodontic treatment but did not need orthodontic treatment had higher self-esteem (23.1, SD 5.2) and were more satisfied with life (18.5, SD 3.7) than other treatment groups (self-esteem range, 20.0-22.7; life satisfaction range, 16.4-18.1), anovaP life, P life. Orthodontic treatment was negatively associated with psychosocial factors (life satisfaction; fixed orthodontic treatment (FOT) β = -0.91, P = 0.02 and self-esteem; FOT β = -1.39, P life and psychosocial factors. Receipt of fixed orthodontic treatment does not appear to be associated with oral health-related quality of life but appears to be negatively associated with self-esteem and satisfaction with life. © 2011 John Wiley & Sons A/S.

Titanium dioxide enrichment of sialic acid-containing glycopeptides

DEFF Research Database (Denmark)

Palmisano, Giuseppe; Lendal, Sara E; Larsen, Martin Røssel

2011-01-01

the glycosylation site of N-linked sialylated glycoproteins. The method relies on the specificity of titanium dioxide affinity chromatography to isolate sialic acid-containing glycopeptides. After enzymatic release of the glycans, the enriched sialylated glycopeptides are analyzed by mass spectrometry...

Development and evaluation of a patient decision aid for young people and parents considering fixed orthodontic appliances.

Science.gov (United States)

Marshman, Zoe; Eddaiki, Abdussalam; Bekker, Hilary L; Benson, Philip E

2016-12-01

To develop and evaluate a child-centred patient decision aid for young people, and their parents, supporting shared decision making about fixed orthodontic appliance treatment with dental health professionals, namely the Fixed Appliance Decision Aid (FADA). The studies were undertaken in a UK teaching dental hospital orthodontic department in 2013-2014. The development phase involved an interview study with: (a) 10 patients (12-16 years old), and their parents, receiving orthodontic care to investigate treatment decision making and inform the content of the FADA and (b) 23 stakeholders critiquing the draft decision aid's content, structure and utility. The evaluation phase employed a pre-/post-test study design, with 30 patients (12-16 years old) and 30 parents. Outcomes included the Decisional Conflict Scale; measures of orthodontic treatment expectations and knowledge. Qualitative analysis identified two informational needs: effectiveness of treatment on orthodontic outcomes and treatment consequences for patients' lives. Quantitative analysis found decisional conflict reduced in both patients (mean difference -12.3, SD 15.3, 95% CI 6.6-17.9; p orthodontic treatment increased; expectations about care were unchanged. Using the FADA may enable dental professionals to support patients and their parents, decisions about fixed appliance treatments more effectively, ensuring young people's preferences are integrated into care planning.

Are claims made in orthodontic journal advertisements evidence-supported?

Science.gov (United States)

Livas, Christos; Kouskoura, Thaleia; Ren, Yijin; Katsaros, Christos; Pandis, Nikolaos

2015-03-01

To examine the supporting evidence of advertisements published in six leading orthodontic journals. The 2012-2013 printed issues of American Journal of Orthodontics and Dentofacial Orthopedics, Australian Orthodontic Journal, Journal of Orthodontics, European Journal of Orthodontics, Journal of Clinical Orthodontics, and Journal of Orofacial Orthopedics were screened for advertisements implying superior performance compared with competitor products. Advertisements were classified according to type of product, availability, and currency of supporting references. A total of 99 unique advertisements claiming clinical benefit or superiority were identified. The overwhelming majority of the identified advertisements promoted appliance products (62.6%), orthodontic materials (14.1%), and dental operatory equipment, including imaging systems (12.1%). Advertisements were found to provide references or not regardless of the product type. Half of the advertisements referred to at least one peer-reviewed publication, whereas unpublished studies were cited by 25% of the advertisements. Most of the referenced articles were published within the past 5 years. The scientific background of advertisements in the orthodontic literature appears limited. While surveillance of journal advertising needs to be regulated, clinicians are urged to critically appraise the claims being made in orthodontic print advertisements by consulting the associated existing evidence.

Development of a container failure function for titanium

International Nuclear Information System (INIS)

Ikeda, B.M.; Shoesmith, D.W.

1990-01-01

Any prediction of container failure times will be based on measurements of crevice corrosion rates under conditions that simulate those anticipated in a waste vault. Since there is a good mechanistic understanding of crevice corrosion in titanium alloys, this is a reasonable approach. Some containers are assumed to fail immediately because of undetected fabrication defects. Experiments designed to measure corrosion penetration rates are under way. Uniform corrosion rates will be determined from weight-gain measurements and estimated from measurements of oxide thickness using Auger spectroscopy. Crevice corrosion can be estimated by counting the number of pits and corroded areas within the crevice using an image analyzer. By performing such analyses on a wide range of specimens under a variety of conditions the authors hope to determine the susceptibilities of titanium alloys to crevice corrosion; measure the uniform and crevice corrosion rates as a function of temperature and chloride concentration; measure the extent of hydrogen pickup as a function of temperature and chloride concentration; and predict the lifetime of containers under Canadian waste vault conditions

High energy X-ray diffraction study of a dental ceramics–titanium functional gradient material prepared by field assisted sintering technique

International Nuclear Information System (INIS)

Witte, K.; Bodnar, W.; Schell, N.; Lang, H.; Burkel, E.

2014-01-01

A functional gradient material with eleven layers composed of a dental ceramics and titanium was successfully consolidated using field assisted sintering technique in a two-step sintering process. High energy X-ray diffraction studies on the gradient were performed at High Energy Material Science beamline at Desy in Hamburg. Phase composition, crystal unit edges and lattice mismatch along the gradient were determined applying Rietveld refinement procedure. Phase analysis revealed that the main crystalline phase present in the gradient is α-Ti. Crystallinity increases stepwisely along the gradient with a decreasing increment between every next layer, following rather the weight fraction of titanium. The crystal unit edge a of titanium remains approximately constant with a value of 2.9686(1) Å, while c is reduced with increasing amount of titanium. In the layer with pure titanium the crystal unit edge c is constant with a value of 4.7174(2) Å. The lattice mismatch leading to an internal stress was calculated over the whole gradient. It was found that the maximal internal stress in titanium embedded in the studied gradient is significantly smaller than its yield strength, which implies that the structure of titanium along the whole gradient is mechanically stable. - Highlights: • High energy XRD studies of dental ceramics–Ti gradient material consolidated by FAST. • Phase composition, crystallinity and lattice parameters are determined. • Crystallinity increases stepwisely along the gradient following weight fraction of Ti. • Lattice mismatch leading to internal stress is calculated over the whole gradient. • Internal stress in α-Ti embedded in the gradient is smaller than its yield strength

A Rare Case of Apical Root Resorption during Orthodontic Treatment of Patient with Multiple Aplasia.

Science.gov (United States)

Agrawal, Chintan M; Mahida, Khyati; Agrawal, Charu C; Bothra, Jitendrakumar; Mashru, Ketan

2015-07-01

External apical root resorption is an adverse effect of orthodontic treatment. It reduces the length of root and breaks the integrity of teeth and dental arch. Orthodontics is the only dental specialty that clinically uses the inflammatory process to correct the mal-aligned teeth. Hence, it is necessary to know the risk factors of root resorption and do everything to reduce the rate of root resorption. Hence, all predisposing factors which are systemic as well as local should be considered before treatment begins. This case report describes the incidence of root resorption following orthodontic treatment and the teeth affected in the patient with multiple aplasia.

Distraction osteogenesis of ankylosed front teeth with subsequent orthodontic fine adjustment.

Science.gov (United States)

Huck, Lothar; Korbmacher, Heike; Niemeyer, Karsten; Kahl-Nieke, Bärbel

2006-07-01

Conventional therapeutic approaches to correct ankylosed anterior teeth in infraposition require compromises involving esthetics and function. The combined approach of distraction and early orthodontic fine adjustment, not yet established as a routine, promises better results concerning the bone conditions and gingival development. Both female patients had suffered a trauma to the front teeth during early mixed dentition resulting in ankylosed central incisors in infraposition. At the ages of 14 years and 2 months and 15 years and 2 months, respectively, we carried out segment distraction by means of a bone-supported internal distractor followed by orthodontic fine adjustment after having shortened the consolidation phase. Both ankylosed front teeth could be successfully aligned, leading to an increase in bone and harmonization of the gingival margin in the dental arch. At ten and 14 months after the conclusion of treatment, we observed only few deviations in the dental situation compared to posttherapeutic findings. From a functional and esthetic point of view, therapy involving combined orthodontics and surgery is superior to conventional therapy. Orthodontic fine adjustment should be considered as a continuation of the distraction procedure.

Paresthesia during orthodontic treatment: case report and review.

Science.gov (United States)

Monini, André da Costa; Martins, Renato Parsekian; Martins, Isabela Parsekian; Martins, Lídia Parsekian

2011-10-01

Paresthesia of the lower lip is uncommon during orthodontic treatment. In the present case, paresthesia occurred during orthodontic leveling of an extruded mandibular left second molar. It was decided to remove this tooth from the appliance and allow it to relapse. A reanatomization was then performed by grinding. The causes and treatment options of this rare disorder are reviewed and discussed. The main cause of paresthesia during orthodontic treatment may be associated with contact between the dental roots and inferior alveolar nerve, which may be well observed on tomography scans. Treatment usually involves tooth movement in the opposite direction of the cause of the disorder.

A novel pre-surgical maxillary orthodontic device using β-titanium wire for wide unilateral cleft lip and palate patients: preliminary study of its efficacy and impact for the maxillary formation.

Science.gov (United States)

Taniguchi, Maki; Oyama, Tomoki; Kiya, Koichiro; Sone, Yumiko; Ishii, Nobuyuki; Hosokawa, Ko

2014-02-01

For patients with a wide, complete, unilateral cleft lip and palate, pre-surgical maxillary orthodontic treatments have been used to reduce the alveolar gap before cheiloplasty. However, most of these treatments are complicated and laborious for patients and for medical professionals. Thus, we developed an original pre-surgical orthodontic device made with two separate acrylic resin plates connected with a spring-shaped β-titanium wire (β-TW). When the device was applied on the palate, each segment of the maxilla was automatically aligned for our target formation with the elastic force of β-titanium alloy. This study aimed to evaluate the efficacy of the new device and the size of the maxilla in comparison with the conventional Hotz procedures. A total of 47 patients with a wide unilateral cleft lip and palate were retrospectively evaluated; 33 patients were treated with our new device (β-TW plate group) and 14 were treated with a Hotz plate (HP group). We evaluated the alveolar gap reduction and the size of the maxilla between the two groups, obtaining intraoral maxillary impressions at birth, at 3 months and 1 year. The width of the alveolar gap in the β-TW plate group was significantly reduced compared with that in the HP group 1 month after the treatment (p pre-surgical orthodontic treatments. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Antibacterial Titanium Produced Using Selective Laser Melting

Science.gov (United States)

Macpherson, Andrew; Li, Xiaopeng; McCormick, Paul; Ren, Ling; Yang, Ke; Sercombe, Timothy B.

2017-12-01

Titanium and titanium alloys used in current medical and dental applications do not possess antibacterial properties, and therefore, postoperative infection remains a significant risk. Recently, the addition of silver and copper to conventional biomaterials has been shown to produce a material with good antibacterial properties. In this article, we investigate selective laser melting as a method of producing antibacterial Ti-6Al-4V containing elemental additions of Cu or Ag. The addition of Ag had no effect on the microstructure or strength, but it did result in a 300% increase in the ductility of the alloy. In contrast, the addition of Cu resulted in an increase in strength but in a decrease in ductility, along with a change in the structure of the material. The Cu-containing alloy also showed moderate antibacterial properties and was superior to the Ag-containing alloy.

Surgically facilitated orthodontic treatment : A systematic review

NARCIS (Netherlands)

Hoogeveen, Eelke J.; Jansma, Johan; Ren, Yijin

INTRODUCTION: Corticotomy and dental distraction have been proposed as effective and safe methods to shorten orthodontic treatment duration in adolescent and adult patients. A systematic review was performed to evaluate the evidence supporting these claims. METHODS: PubMed, Embase, and Cochrane

Genotoxicity of corrosion eluates obtained from orthodontic brackets in vitro.

Science.gov (United States)

Angelieri, Fernanda; Marcondes, Joao Paulo C; de Almeida, Danielle Cristina; Salvadori, Daisy M F; Ribeiro, Daniel A

2011-04-01

The purpose of this study was to evaluate whether corrosion eluates obtained from commercially available orthodontic brackets are able to induce genetic damage in vitro. Genotoxicity was assessed by the single cell gel (comet) assay using Chinese hamster ovary (CHO) cells. The following orthodontic metallic brackets were used: Morelli (Sorocaba, Brazil); Abzil (São José do Rio Preto, Brazil); Dentaurum (Pforzheim, Germany); and 3M Unitek (Puchheim, Germany). Each dental bracket was submitted to a corrosion process in a solution containing equal amounts of acetic acid and sodium chloride at 0.1 M concentration for 1, 3, 7, 14, 21, 35, and 70 days. CHO cells were exposed to eluates for 30 minutes at 37°C. The negative control was treated with the same solution used for corrosion process for 30 minutes at 37°C. Independent positive control was performed with methyl methanesulfonate (MMS) (Sigma Aldrich, St. Louis, Mo) at 1 ug/mL for 1 hour. None of the eluates was found to exhibit genotoxicity, regardless of the different commercial brands of orthodontic appliance used. In summary, our results indicate corrosion eluates obtained from orthodontic brackets do not induce genetic damage as assessed by single cell gel (comet) assay. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The human capital crisis in orthodontics.

Science.gov (United States)

Ackerman, Marc Bernard

2012-01-01

The economics of dental practice are changing. The author reflects on the loss of a long-term, highly effective, and dedicated assistant in an orthodontic practice. Changes in technology, numbers of dentists, expected benefit levels, and a competitive workplace environment are combining to put pressures on the traditional model of oral health care. Whatever the solution turns out to be, the profession should take the lead in actively developing alternatives, and these will necessarily involve development of human capital in the dental practice.

Orthodontics in the "Art" of Aesthetics.

Science.gov (United States)

Thomas, Mayuri

2015-01-01

Aesthetics in dentistry has of late become an awakening/actor among patients and often serves as a major reason for seeking dental treatment and care. Ever since the introduction of orthodontics as a separate specialty branch in dentistry, a variety of techniques have evolved, and methods developed both in the type of devices/instruments used and treatments planned. The discipline of orthodontic aesthetics involves micro and macro aesthetics, gingival, and facial aesthetics. This article helps focus on the artistic part of the orthodontic science. It brings out various important factors involved in customizing aesthetic orthodontic treatment planning according to the individual needs of the patient. Through this kind of treatment planning not only are the functional and biological needs of the patient met, they also provide a stable and durable results. Less invasive treatment planning makes it easier for the patient to select future treatment options as new technologies keep evolving. The review was selected by typing aesthetic orthodontics in the Google search engine, Pubmed, and Pubmed Central. Literature review of articles reflecting history, different analysis, factors responsible, and the latest technique was conducted.

Osseointegration of a 3D Printed Stemmed Titanium Dental Implant: A Pilot Study

OpenAIRE

James Tedesco; Bryan E. J. Lee; Alex Y. W. Lin; Dakota M. Binkley; Kathleen H. Delaney; Jacek M. Kwiecien; Kathryn Grandfield

2017-01-01

In this pilot study, a 3D printed Grade V titanium dental implant with a novel dual-stemmed design was investigated for its biocompatibility in vivo. Both dual-stemmed (n = 12) and conventional stainless steel conical (n = 4) implants were inserted into the tibial metaphysis of New Zealand white rabbits for 3 and 12 weeks and then retrieved with the surrounding bone, fixed, dehydrated, and embedded into epoxy resin. The implants were analyzed using correlative histology, microcomputed tomogra...

Expression and Function of Hypoxia Inducible Factor-1α and Vascular Endothelial Growth Factor in Pulp Tissue of Teeth under Orthodontic Movement

Directory of Open Access Journals (Sweden)

Fulan Wei

2015-01-01

Full Text Available Orthodontic force may lead to cell damage, circulatory disturbances, and vascular changes of the dental pulp, which make a hypoxic environment in pulp. In order to maintain the homeostasis of dental pulp, hypoxia will inevitably induce the defensive reaction. However, this is a complex process and is regulated by numerous factors. In this study, we established an experimental animal model of orthodontic tooth movement to investigate the effects of mechanical force on the expression of VEGF and HIF-1α in dental pulp. Histological analysis of dental pulp and expressions of HIF-1α and VEGF proteins in dental pulp were examined. The results showed that inflammation and vascular changes happened in dental pulp tissue in different periods. Additionally, there were significant changes in the expression of HIF-1α and VEGF proteins under orthodontic force. After application of mechanical load, expression of HIF-1α and VEGF was markedly positive in 1, 3, 7 d, and 2 w groups, and then it weakened in 4 w group. These findings suggested that the expression of HIF-1α and VEGF was enhanced by mechanical force. HIF-1α and VEGF may play an important role in retaining the homeostasis of dental pulp during orthodontic tooth movement.

Comparing esthetic smile perceptions among laypersons with and without orthodontic treatment experience and dentists

Science.gov (United States)

An, Seong-Mu; Choi, Sun-Young; Chung, Young-Wook; Jang, Tae-Ho

2014-01-01

Objective The purpose of this study was to examine whether orthodontic treatment experience affects the individual's perception of smile esthetics and to evaluate differences among orthodontically treated laypersons, non-treated laypersons, and dentists by using computerized image alterations. Methods A photograph of a woman's smile was digitally altered using a software image editing program. The alterations involved gingival margin height, crown width and length, incisal plane canting, and dental midline of the maxillary anterior teeth. Three groups of raters (orthodontically treated laypersons, non-treated laypersons, and dentists) evaluated the original and altered images using a visual analog scale. Results The threshold for detecting changes in maxillary central incisor gingival margin height among laypersons was 1.5 mm; the threshold of dentists, who were more perceptive, was 1.0 mm. For maxillary lateral incisor crown width and height, the threshold of all three groups was 3.0 mm. Canting of the incisal plane was perceived when the canting was 3.0 mm among non-treated laypersons, 2.0 mm among treated laypersons, and 1.0 mm among dentists. Non-treated laypersons could not perceive dental midline shifts; however, treated laypersons and dentists perceived them when the shift was ≥ 3.0 mm. Conclusions Laypersons with and without orthodontic treatment experience and dentists have different perceptions of smile esthetics. Orthodontically treated laypersons were more critical than non-treated laypersons regarding incisal plane canting and dental midline shifts. Based on these findings, it is suggested that orthodontic treatment experience improved the esthetic perceptions of laypersons. PMID:25473645

The effect of using an audience response system on learning, motivation and information retention in the orthodontic teaching of undergraduate dental students: a cross-over trial.

Science.gov (United States)

Dhaliwal, Harmeet Kaur; Allen, Mark; Kang, Jing; Bates, Claire; Hodge, Trevor

2015-06-01

New methods of teaching and learning are constantly being sought in the adult learning environment. Audience Response Systems (ARS) have been used in many different learning environments, especially in the field of medical education. The objective of this investigation was to ascertain the effect of ARS use in undergraduate teaching in a UK dental school. A cross-over clustered randomized educational trial. Leeds Dental Institute. Year 4 undergraduate dental students in orthodontics. Students at Leeds Dental Institute were taught two different topics within the curriculum to test the use of ARS in a cross-over trial. A questionnaire was delivered to the test (ARS) and control (non-ARS) groups. The response rate to the questionnaires was 89·5% (test group) and 82·9% (control group). The ARS enabled students to perform better as shown by knowledge retention (P = 0·013). Students found the seminar more interesting (P = 0·013), easier to concentrate (P = 0·025) and easier to participate in (P = 0·020) when ARS was used. When ARS was used, students were more able to answer questions (P<0·0001), were more likely to prepare for the seminar (P<0·0001) and significantly preferred using ARS (P<0·0001). ARS was found to significantly improve student concentration and participation in small group seminar teaching and significantly improved knowledge retention. ARS may be useful in facilitating orthodontic teaching in the future.

Characterization and coating stability evaluation of nickel-titanium orthodontic esthetic wires: an in vivo study

Directory of Open Access Journals (Sweden)

Nina ARGALJI

2017-08-01

Full Text Available Abstract The objective of this study was to compare coating dimensions and surface characteristics of two different esthetic covered nickel-titanium orthodontic rectangular archwires, as-received from the manufacturer and after oral exposure. The study was designed for comparative purposes. Both archwires, as-received from the manufacturer, were observed using a stereomicroscope to measure coating thickness and inner metallic dimensions. The wires were also exposed to oral environment in 11 orthodontic active patients for 21 days. After removing the samples, stereomicroscopy images were captured, coating loss was measured and its percentage was calculated. Three segments of each wire (one as-received and two after oral exposure were observed using scanning electron microscopy for a qualitative analysis of the labial surface of the wires. The Lilliefors test and independent t-test were applied to verify normality of data and statistical differences between wires, respectively. The significance level adopted was 0.05. The results showed that the differences between the wires while comparing inner height and thickness were statistically significant (p < 0.0001. In average, the most recently launched wire presented a coating thickness twice that of the control wire, which was also a statistically significant difference. The coating loss percentage was also statistically different (p = 0.0346 when the latest launched wire (13.27% was compared to the control (29.63%. In conclusion, the coating of the most recent wire was thicker and more uniform, whereas the control had a thinner coating on the edges. After oral exposure, both tested wires presented coating loss, but the most recently launched wire exhibited better results.

The Validity of Subjects in Korean Dental Technicians' Licensing Examination

Directory of Open Access Journals (Sweden)

Woong-chul Kim

2005-06-01

Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

A randomized clinical trial to compare three methods of orthodontic space closure.

Science.gov (United States)

Dixon, V; Read, M J F; O'Brien, K D; Worthington, H V; Mandall, N A

2002-03-01

To compare the rates of orthodontic space closure for: Active ligatures, polyurethane powerchain (Rocky Mountain Orthodontics, RMO Europe, Parc d'Innovation, Rue Geiler de Kaysersberg, 67400 Illkirch-Graffenstaden, Strasbourg, France) and nickel titanium springs. Patients entering the space closure phase of fixed orthodontic treatment attending six orthodontic providers. Twelve patients received active ligatures (48 quadrants), 10 patients received powerchain (40 quadrants) and 11 patients, nickel-titanium springs (44 quadrants). Patients were randomly allocated for treatment with active ligatures, powerchain or nickel titanium springs. Upper and lower study models were collected at the start of space closure (T(o)) and 4 months later (T(1)). We recorded whether the patient wore Class II or Class III elastics. Space present in all four quadrants was measured, by a calibrated examiner, using Vernier callipers at T(o) and T(1.) The rate of space closure, in millimetres per month (4 weeks) and a 4-monthly rate, was then calculated. Examiner reliability was assessed at least 2 weeks later. Mean rates of space closure were 0.35 mm/month for active ligatures, 0.58 mm/month for powerchain, and 0.81 mm/month for NiTi springs. No statistically significant differences were found between any methods with the exception of NiTi springs showing more rapid space closure than active ligatures (P space closure. NiTi springs gave the most rapid rate of space closure and may be considered the treatment of choice. However, powerchain provides a cheaper treatment option that is as effective. The use of inter-arch elastics does not appear to influence rate of space closure.

Micro-computerised tomography optimisation for the measurement of bone mineral density around titanium dental implants

International Nuclear Information System (INIS)

Park, C.; Swain, M.; Duncan, W.

2010-01-01

Titanium dental implants (screws) are commonly used to replace missing teeth by forming a biological union with bone ('osseointegration'). Micro-computerised tomography (μCT) may be useful for measuring bone mineral density around dental implants. Major issues arise because of various artefacts that occur with polychromatic X-rays associated bench type instruments that may compromise interpretation of the observations. In this study various approaches to minimise artefacts such as; beam hardening, filtering and edge effects are explored with a homogeneous polymeric material, Teflon, with and without an implant present. The implications of the limitations of using such polychromatic μCT systems to quantify bone mineral density adjacent to the implant are discussed. (author)

Effects of Low-Intensity Pulsed Ultrasound on Orthodontic Tooth Movement and Orthodontically Induced Inflammatory Root Resorption in Ovariectomized Osteoporotic Rats.

Science.gov (United States)

Dahhas, Feras Y; El-Bialy, Tarek; Afify, Ahmed R; Hassan, Ali H

2016-03-01

This study investigated the effects of low-intensity pulsed ultrasound (LIPUS) on orthodontic tooth movement (OTM) and orthodontically induced inflammatory root resorption (OIRR) in ovariectomized osteoporotic rats. Forty-eight 28-d-old female Wistar rats were divided into ovariectomized and intact groups. In both groups, animals were left untreated; treated with 50 g mesially directed orthodontic force on the maxillary first molars using nickel-titanium closed-coil springs for 28 d; or treated with the same orthodontic protocol along with a 20-min LIPUS application on alternate days for 28 d. Extent of OTM and amount of OIRR of mesial roots were measured on three-dimensionally reconstructed micro-computed tomography images. Ovariectomy increased OIRR (p root volumetric loss regardless of ovariectomy status (p < 0.05); only ovariectomized animals had decreased OTM (p < 0.05). LIPUS normalizes OTM and attenuates OIRR in ovariectomized osteoporotic rats. It may therefore be beneficial in women with postmenopausal osteoporosis. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

A Rare Case of Apical Root Resorption during Orthodontic Treatment of Patient with Multiple Aplasia

OpenAIRE

Agrawal, Chintan M; Mahida, Khyati; Agrawal, Charu C; Bothra, Jitendrakumar; Mashru, Ketan

2015-01-01

External apical root resorption is an adverse effect of orthodontic treatment. It reduces the length of root and breaks the integrity of teeth and dental arch. Orthodontics is the only dental specialty that clinically uses the inflammatory process to correct the mal-aligned teeth. Hence, it is necessary to know the risk factors of root resorption and do everything to reduce the rate of root resorption. Hence, all predisposing factors which are systemic as well as local should be considered be...

Effect of drugs on orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Siti Sarah Aulia Amrullah

2016-06-01

Full Text Available Orthodontic tooth movement is basically a biological response to mechanical forces given to the teeth in orthodontic treatment, which involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structure. Remodeling changes in periodontal tissues are considered to be essential in effecting orthodontic tooth movement which is the base of orthodontic correction. Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can influence mechanically stressed periodontal tissue through the circulation and interact with target cell combination of which may be inhibitory, additive or synergize. Medications might have an important influence on the rate of tooth movement, and information on their consumption is essential to adequately discuss treatment planning with patients. Therefore it is imperative to the practitioners being in medical profession, must pay close attention to the drug consumption history of every patient before and during the course of treatment.

Osseointegration of titanium, titanium alloy and zirconia dental implants: current knowledge and open questions.

Science.gov (United States)

Bosshardt, Dieter D; Chappuis, Vivianne; Buser, Daniel

2017-02-01

Bone healing around dental implants follows the pattern and sequence of intramembraneous osteogenesis with formation of woven bone first of all followed later by formation of parallel-fibered and lamellar bone. Bone apposition onto the implant surface starts earlier in trabecular bone than in compact bone. While the first new bone may be found on the implant surface around 1 week after installation, bone remodeling starts at between 6 and 12 weeks and continues throughout life. Bone remodeling also involves the bone-implant interface, thus transiently exposing portions of the implant surface. Surface modifications creating micro-rough implant surfaces accelerate the osseointegration process of titanium implants, as demonstrated in numerous animal experiments. Sandblasting followed by acid-etching may currently be regarded as the gold standard technique to create micro-rough surfaces. Chemical surface modifications, resulting in higher hydrophilicity, further increase the speed of osseointegration of titanium and titanium-zirconium implants in both animals and humans. Surface modifications of zirconia and alumina-toughened zirconia implants also have an influence on the speed of osseointegration, and some implant types reach high bone-to-implant contact values in animals. Although often discussed independently of each other, surface characteristics, such as topography and chemistry, are virtually inseparable. Contemporary, well-documented implant systems with micro-rough implant surfaces, placed by properly trained and experienced clinicians, demonstrate high long-term survival rates. Nevertheless, implant failures do occur. A low percentage of implants are diagnosed with peri-implantitis after 10 years in function. In addition, a low number of implants seem to be lost for primarily reasons other than biofilm-induced infection. Patient factors, such as medications interfering with the immune system and bone cells, may be an element contributing to continuous bone

Emergencies in Orthodontics. Part 2: Management of Removable Appliances, Functional Appliances and other Adjuncts to Orthodontic Treatment.

Science.gov (United States)

Dowsing, Paul; Murray, Alison; Sandler, Jonathan

2015-04-01

In the second of two papers, management of orthodontic emergencies involving appliances other than Fixed appliances will be detailed. Problems relating to removable appliances, as well as other orthodontic adjuncts, will be discussed. Unfortunately, orthodontic appliance breakage does occur, despite the clinicians giving clear and concise instructions to the patients and their parents at fitting. If general dental practitioners have a practical knowledge of how to diagnose problems and to provide appropriate advice or timely 'emergency' treatment, this will significantly reduce the inconvenience for all parties concerned. It should also ensure that treatment progresses in the most efficient and comfortable manner for their patients. In specific situations the early, accurate identification of the problem and instigation of its appropriate management can avoid more serious consequences. Clinical Relevance: Appropriate handling of an orthodontic 'emergency' by the dentist can, on many occasions, provide immediate relief to the patient. This will, in turn, allow treatment to continue in the right direction, thus allowing more efficient and effective use of valuable resources.

A discerning approach to simple aesthetic orthodontics.

Science.gov (United States)

Noar, J H; Sharma, S; Roberts-Harry, D; Qureshi, T

2015-02-16

There is currently considerable interest from general dental practitioners (GDPs) in the use of simple orthodontics to treat adult malocclusions. There is controversy in this, particularly in relation to 'quick fixes', simple orthodontics and 'straight teeth in six months' as opposed to more conventional treatment where the whole malocclusion is treated. This article will present a case for the use of simple aesthetic adult orthodontics in a measured and planned way. It will discuss the processes, planning and the importance of consent. It will also highlight how digital technology is used to preview, consent and execute an aesthetic result. Many of the recent systems emerging, have been as a result of the demand and supply of cosmetic dentistry. This, to a degree, has not helped since the implication of a 'quick-fix' is associated with this field. There has also been discussion on what the limits of GDP orthodontics should be. There is variability in how GDPs approach orthodontics, their experience, skill and ability to treat to an acceptable standard. Short courses may be one way of delivering orthodontic training but some of these courses are not regulated and the amount of internal mentoring is variable. This article highlights some of the systems in use, and potential upsides and downsides of this approach.

Frequency and distribution of developmental anomalies in the permanent teeth of a Turkish orthodontic patient population

Directory of Open Access Journals (Sweden)

Fatih Kazanci

2011-06-01

Conclusion: The prevalence of developmental dental anomalies was higher in females than males. Impacted teeth were the most common developmental dental anomaly in this Turkish orthodontic population, followed by hypodontia.

Temporomandibular disorders and orthodontic treatment need in orthodontically untreated children and adolescents.

Science.gov (United States)

Špalj, Stjepan; Šlaj, Martina; Athanasiou, Athanasios E; Žak, Irena; Šimunović, Martina; Šlaj, Mladen

2015-03-01

The aim of this study was to explore the association between signs and symptoms of temporomandibular disorders (TMD) and orthodontic treatment need in orthodontically untreated children and adolescents. One thousand five hundred and ninety-seven subjects aged 11-19 years, without previous orthodontic history, from sixteen randomly selected public schools in Zagreb, Croatia, were examined. Malocclusion characteristics were assessed by using the criteria proposed by Bjork et al., the Dental Aesthetic Index, and the Aesthetic Component of Index of Orthodontic Treatment Need. Data on TMD signs/symptoms and parafunctional behaviour were obtained by means of questionnaire and clinical examination, respectively. Multiple logistic regression models were used for analysis. Twenty-two percent of children and young adolescents had one or more signs of TMD, ranging from 17% in age of 11 years up to 24% in age of 19. There was poor correlation between presence of TMD and orthodontic treatment need. Multiple logistic regression models showed that Class III, crowding and spacing were related to mandibular deflection on opening. Ectopic eruption was related to TMJ clicking, and severely tipped teeth with reduced mouth opening. Headaches presented a positive relationship with reverse overjet and severe rotations, and tooth wear with crowding, spacing and lateral openbite. Age, female gender and parafunctional habits were related to several TMD signs. Although logistic regression models were statistically significant (p < 0.05) malocclusions, parafunctional behaviours, age and gender accounted for less than 20% of the variability in TMD signs/symptoms. TMD signs and symptoms seemed to be poorly related to malocclusions or treatment needs.

Orthodontic Elastic Embedded in Gingiva for 7 Years

Directory of Open Access Journals (Sweden)

Shruti Tandon

2013-01-01

Full Text Available Dental materials especially orthodontic elastics often get embedded in gingival tissues due to iatrogenic factors. If retained for a long time, inflammatory response starts as asymptomatic crestal bone loss and may progress to severe periodontal abscess. Unsupported orthodontic elastics used for diastema closure may result in exfoliation of teeth, while elastic separators may get embedded in interdental gingiva if banding is performed without removing it. These cases of negligence are detrimental for survival of affected teeth. This paper highlights a case of orthodontic elastic embedded in interproximal gingiva of a 23-year-old healthy female for 7 years after completion of fixed orthodontic treatment. Surprisingly, there was no clinical sign of inflammation around elastic band and it was removed easily without any local anaesthesia. However, mild crestal bone loss was observed on periapical radiograph. The gingiva healed completely after sub gingival debridement.

Can we close large prosthetic space with orthodontics?

Science.gov (United States)

Mesko, Mauro Elias; Skupien, Jovito Adiel; Valentini, Fernanda; Pereira-Cenci, Tatiana

2013-01-01

For years, the treatment for the replacement of a missing tooth was a fixed dental prosthesis. Currently, implants are indicated to replace missing teeth due to high clinical success and with the advantage of not performing preparations in the adjacent tooth. Another option for space closure is the use of orthodontics associated to miniscrews for anchorage allowing better control of the orthodontic biomechanics and especially making possible closure of larger prosthetic spaces. Thus, this article describes two cases with indications and discussion of the advantages and disadvantages of using orthodontics for prosthetic spaces closure. The cases herein presented show that it is possible to close an space when there are available teeth in the adjacent area. It can be concluded that when a malocclusion is present there will be a strong trend to indicate space closure by orthodontic movement as it preserves natural teeth and seems a more physiological approach.

Comparison of changes in the transverse dental axis between patients with skeletal Class III malocclusion and facial asymmetry treated by orthognathic surgery with and without presurgical orthodontic treatment.

Science.gov (United States)

Song, Han-Sol; Choi, Sung-Hwan; Cha, Jung-Yul; Lee, Kee-Joon; Yu, Hyung-Seog

2017-07-01

To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, -1.8° ± 2.8°, p = 0.044; nondeviated side, -3.7° ± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0° ± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

Dental extrusion with orthodontic miniscrew anchorage: a case report describing a modified method.

Science.gov (United States)

Horliana, Ricardo Fidos; Horliana, Anna Carolina Ratto Tempestini; Wuo, Alexandre do Vale; Perez, Flávio Eduardo Guillin; Abrão, Jorge

2015-01-01

In recent years, the skeletal anchorage through miniscrews has expanded the treatment options in orthodontics (Yamaguchi et al., 2012). We hereby present a modified method for tooth extrusion for cases where crown-lengthening surgery is contraindicated for aesthetic reasons. This modified method uses three orthodontic appliances: a mini-implant, an orthodontic wire, and a bracket. The aim of this case report was to increase the length of the clinical crown of a fractured tooth (tooth 23) by means of an orthodontic extrusion with the modified method of Roth and Diedrich.

Integrating orthodontics for the optimal smile.

Science.gov (United States)

Yorita, Frank K

2008-08-01

With the rapid and complex advancements in materials and technology in dentistry today, it has become difficult for the dental practitioner to stay current in one field, let alone more than one. In order to increase patient benefits and decrease the dentist's frustration, today's dental practice requires an interdisciplinary approach that integrates the knowledge, skills, and experience of all the disciplines of dentistry and its associated fields. This article highlights the advantage of an interdisciplinary treatment approach and how knowledge of basic orthodontic techniques can help in producing a more comprehensive treatment plan.

Influence of different implant materials on the primary stability of orthodontic mini-implants.

Science.gov (United States)

Pan, Chin-Yun; Chou, Szu-Ting; Tseng, Yu-Chuan; Yang, Yi-Hsin; Wu, Chao-Yi; Lan, Ting-Hsun; Liu, Pao-Hsin; Chang, Hong-Po

2012-12-01

This study evaluates the influence of different implant materials on the primary stability of orthodontic mini-implants by measuring the resonance frequency. Twenty-five orthodontic mini-implants with a diameter of 2 mm were used. The first group contained stainless steel mini-implants with two different lengths (10 and 12 mm). The second group included titanium alloy mini-implants with two different lengths (10 and 12 mm) and stainless steel mini-implants 10 mm in length. The mini-implants were inserted into artificial bones with a 2-mm-thick cortical layer and 40 or 20 lb/ft(3) trabecular bone density at insertion depths of 2, 4, and 6 mm. The resonance frequency of the mini-implants in the artificial bone was detected with the Implomates(®) device. Data were analyzed by two-way analysis of variance followed by the Tukey honestly significant difference test (α = 0.05). Greater insertion depth resulted in higher resonance frequency, whereas longer mini-implants showed lower resonance frequency values. However, resonance frequency was not influenced by the implant materials titanium alloy or stainless steel. Therefore, the primary stability of a mini-implant is influenced by insertion depth and not by implant material. Insertion depth is extremely important for primary implant stability and is critical for treatment success. Copyright © 2012. Published by Elsevier B.V.

Influence of different implant materials on the primary stability of orthodontic mini-implants

Directory of Open Access Journals (Sweden)

Chin-Yun Pan

2012-12-01

Full Text Available This study evaluates the influence of different implant materials on the primary stability of orthodontic mini-implants by measuring the resonance frequency. Twenty-five orthodontic mini-implants with a diameter of 2 mm were used. The first group contained stainless steel mini-implants with two different lengths (10 and 12 mm. The second group included titanium alloy mini-implants with two different lengths (10 and 12 mm and stainless steel mini-implants 10 mm in length. The mini-implants were inserted into artificial bones with a 2-mm-thick cortical layer and 40 or 20 lb/ft3 trabecular bone density at insertion depths of 2, 4, and 6 mm. The resonance frequency of the mini-implants in the artificial bone was detected with the Implomates® device. Data were analyzed by two-way analysis of variance followed by the Tukey honestly significant difference test (α = 0.05. Greater insertion depth resulted in higher resonance frequency, whereas longer mini-implants showed lower resonance frequency values. However, resonance frequency was not influenced by the implant materials titanium alloy or stainless steel. Therefore, the primary stability of a mini-implant is influenced by insertion depth and not by implant material. Insertion depth is extremely important for primary implant stability and is critical for treatment success.

Interruption of Electrical Conductivity of Titanium Dental Implants Suggests a Path Towards Elimination Of Corrosion.

Science.gov (United States)

Pozhitkov, Alex E; Daubert, Diane; Brochwicz Donimirski, Ashley; Goodgion, Douglas; Vagin, Mikhail Y; Leroux, Brian G; Hunter, Colby M; Flemmig, Thomas F; Noble, Peter A; Bryers, James D

2015-01-01

Peri-implantitis is an inflammatory disease that results in the destruction of soft tissue and bone around the implant. Titanium implant corrosion has been attributed to the implant failure and cytotoxic effects to the alveolar bone. We have documented the extent of titanium release into surrounding plaque in patients with and without peri-implantitis. An in vitro model was designed to represent the actual environment of an implant in a patient's mouth. The model uses actual oral microbiota from a volunteer, allows monitoring electrochemical processes generated by biofilms growing on implants and permits control of biocorrosion electrical current. As determined by next generation DNA sequencing, microbial compositions in experiments with the in vitro model were comparable with the compositions found in patients with implants. It was determined that the electrical conductivity of titanium implants was the key factor responsible for the biocorrosion process. The interruption of the biocorrosion current resulted in a 4-5 fold reduction of corrosion. We propose a new design of dental implant that combines titanium in zero oxidation state for osseointegration and strength, interlaid with a nonconductive ceramic. In addition, we propose electrotherapy for manipulation of microbial biofilms and to induce bone healing in peri-implantitis patients.

Interruption of Electrical Conductivity of Titanium Dental Implants Suggests a Path Towards Elimination Of Corrosion.

Directory of Open Access Journals (Sweden)

Alex E Pozhitkov

Full Text Available Peri-implantitis is an inflammatory disease that results in the destruction of soft tissue and bone around the implant. Titanium implant corrosion has been attributed to the implant failure and cytotoxic effects to the alveolar bone. We have documented the extent of titanium release into surrounding plaque in patients with and without peri-implantitis. An in vitro model was designed to represent the actual environment of an implant in a patient's mouth. The model uses actual oral microbiota from a volunteer, allows monitoring electrochemical processes generated by biofilms growing on implants and permits control of biocorrosion electrical current. As determined by next generation DNA sequencing, microbial compositions in experiments with the in vitro model were comparable with the compositions found in patients with implants. It was determined that the electrical conductivity of titanium implants was the key factor responsible for the biocorrosion process. The interruption of the biocorrosion current resulted in a 4-5 fold reduction of corrosion. We propose a new design of dental implant that combines titanium in zero oxidation state for osseointegration and strength, interlaid with a nonconductive ceramic. In addition, we propose electrotherapy for manipulation of microbial biofilms and to induce bone healing in peri-implantitis patients.

Bacterial colonization on coated and uncoated orthodontic wires: A prospective clinical trial.

Science.gov (United States)

Raji, Seyed Hamid; Shojaei, Hasan; Ghorani, Parinaz Saeidi; Rafiei, Elahe

2014-11-01

The advantages of coated orthodontic wires such as esthetic and their effects on reduced friction, corrosion and allergic reaction and the significant consequences of plaque accumulation on oral health encouraged us to assess bacterial colonization on these wires. A total of 18 (9 upper and 9 lower) epoxy resin coated 16 × 22 nickel-titanium wires (Spectra, GAC, USA) and 18 (9 upper and 9 lower) non-coated 16 × 22 nickel-titanium wires (Sentalloy, GAC, USA) with isolated packages were selected and sterilized before application. The samples were divided randomly between upper and lower arches in 18 patients and hence that every patient received one coated and one uncoated wire at the same time. Samples were removed and cut in equal lengths after 3 weeks and placed in phosphate buffered saline buffer. After separation of bacteria in trypsin and ethylenediaminetetraacetic acid solution, the diluted solution was cultured in blood agar and bacterial colony forming units were counted. Finally, the data was analyzed using the paired t-test and the significance was set at 0.05. Mean of bacterial colonization on uncoated wires was more than that of coated wires (P < 0.001). Bacterial plaque accumulation on epoxy resin coated nickel-titanium orthodontic wires is significantly lower than uncoated nickel-titanium wires.

Evaluation of Effects of Sterilization on Mechanical Properties of Orthodontic Wires

Directory of Open Access Journals (Sweden)

Sridhar Kannan

2012-01-01

Results: Dry heat sterilization, autoclave, 2% glutaraldehyde solution had no effect on ultimate tensile strength, 0.1% yield strength, modulus of elasticity and percentage elongation of stainless steel and elgiloy wires. Tensile strength and yield strength of Nitinol and b-titanium wires together with percentage elongation of b-titanium wires significantly increased following dry heat sterilization and autoclave. No detrimental effects on properties of wires were observed. These sterilization procedures could be safely recommended for sterilization of orthodontic wires.

Fibrotic encapsulation of orthodontic appliance in palate.

Science.gov (United States)

Muthu, Jananni; Muthanandam, Sivaramakrishnan; Umapathy, Gubernath; Kannan, Anitha Logaranjani

2017-01-01

Iatrogenic trauma though not serious is very common in dental practice. Orthodontic treatment can inflict such injuries as they are prolonged over a long period of time. Ill-fabricated orthodontic appliances, such as wires and brackets, or the patients' habits such as application of constant pressure over the appliance can traumatize the adjacent oral soft tissues. In rare cases, these appliances can get embedded into the mucosa and gingival tissues. This case report describes one such case of iatrogenic trauma to the palatal mucosa due to entrapment of a tongue spike appliance and its surgical management.

Application of micro beam PIXE to detection of titanium ion release from dental and orthopaedic implants

International Nuclear Information System (INIS)

Ektessabi, A.M.; Otsuka, T.; Tsuboi, Y.; Yokoyama, K.; Albrektsson, T.; Sennerby, L.; Johansson, C.

1994-01-01

In the past two decades the utilization of dental and orthopaedic implants in reconstructive surgery has been spread widely. Most of these implants are inserted in the corrosive environment of the human body for long periods of time. The level of dissolution, release, and transport of metal ions as a result of corrosion of these materials are not fully known at present. We report the results of application of micro ion beam PIXE spectroscopy to detect release of titanium from titanium and titanium alloy implants inserted in the tibiae of rabbits for three months. It was found that titanium ions could be detected in the surrounding tissues, with high precision, as a gradient from the implant surface and in higher amounts in the bone tissue as compared with the soft tissues. It is concluded that application of micro ion beam PIXE spectroscopy for detection of metal ion release, and distribution of the released material around the implants with high special resolution and accuracy may be used to further investigate the mechanism of metal release, and the relation between surface micromorphology and corrosion resistance of the implant materials. (author)

Lactam inhibiting Streptococcus mutans growth on titanium

International Nuclear Information System (INIS)

Xavier, J.G.; Geremias, T.C.; Montero, J.F.D.; Vahey, B.R.; Benfatti, C.A.M.; Souza, J.C.M.; Magini, R.S.; Pimenta, A.L.

2016-01-01

The aim of this work was to analyze the activity of novel synthetic lactams on preventing biofilm formation on titanium surfaces. Titanium (Ti6Al4V) samples were exposed to Streptococcus mutans cultures in the presence or absence of a synthetic lactam. After 48 h incubation, planktonic growth was determined by spectrophotometry. Biofilm was evaluated by crystal violet staining and colony forming units (CFU·ml −1 ), followed by scanning electron microscopy (SEM). Results showed that the average of adhered viable cells was approximately 1.5 × 10 2 CFU/ml in the presence of lactam and 4 × 10 2 CFU/ml in its absence. This novel compound was considerable active in reducing biofilm formation over titanium surfaces, indicating its potential for the development of antimicrobial drugs targeting the inhibition of the initial stages of bacterial biofilms on dental implants abutments. - Highlights: • A novel synthetic compound is tested on preventing biofilm formation on titanium surfaces • Biofilm inhibition has been achieved on titanium surfaces containing the novel compound. • Planktonic growth of S. mutans was not affected by the presence of lactams on titanium.

Lactam inhibiting Streptococcus mutans growth on titanium

Energy Technology Data Exchange (ETDEWEB)

Xavier, J.G.; Geremias, T.C.; Montero, J.F.D. [Center for Research on Dental Implants (CEPID), School of Dentistry (ODT), Federal University of Santa Catarina - UFSC, Florianópolis/SC, 88040-900 (Brazil); Vahey, B.R. [Herman Ostrow School of Dentistry of USC, 925 W 34 St, Los Angeles, CA 90089 (United States); Benfatti, C.A.M.; Souza, J.C.M.; Magini, R.S. [Center for Research on Dental Implants (CEPID), School of Dentistry (ODT), Federal University of Santa Catarina - UFSC, Florianópolis/SC, 88040-900 (Brazil); Pimenta, A.L., E-mail: andrea@intelab.ufsc.br [Department of Biologia, ERRMECe, Université de Cergy Pontoise, 2, Av. Adolphe Chauvin 95302 Cergy, Pontoise (France); Integrated Laboratories Technologies (InteLab), Dept. Chemical and Food Engineering (EQA), Federal University of Santa Catarina - UFSC, Florianópolis/SC, 88040-970 (Brazil)

2016-11-01

The aim of this work was to analyze the activity of novel synthetic lactams on preventing biofilm formation on titanium surfaces. Titanium (Ti6Al4V) samples were exposed to Streptococcus mutans cultures in the presence or absence of a synthetic lactam. After 48 h incubation, planktonic growth was determined by spectrophotometry. Biofilm was evaluated by crystal violet staining and colony forming units (CFU·ml{sup −1}), followed by scanning electron microscopy (SEM). Results showed that the average of adhered viable cells was approximately 1.5 × 10{sup 2} CFU/ml in the presence of lactam and 4 × 10{sup 2} CFU/ml in its absence. This novel compound was considerable active in reducing biofilm formation over titanium surfaces, indicating its potential for the development of antimicrobial drugs targeting the inhibition of the initial stages of bacterial biofilms on dental implants abutments. - Highlights: • A novel synthetic compound is tested on preventing biofilm formation on titanium surfaces • Biofilm inhibition has been achieved on titanium surfaces containing the novel compound. • Planktonic growth of S. mutans was not affected by the presence of lactams on titanium.

USE OF ORTHODONTIC TREATMENT NEEDS INDICES FOR ORAL HEALTH SURVEY.

Science.gov (United States)

Nakas, Enita; Tiro, Alisa; Vrazalica, Lejla Redzepagic; Hadzihasanovic, Dzana; Dzemidzic, Vildana

2016-04-01

The aim of our study is to compare incidence of orthodontic malocclusion based on occlusal indices and Index of Orthodontic Treatment Need (IOTN), and to evaluate the most commonly used method among the dentists for orthodontic treatment in Sarajevo. The sample consisted of 110 (31 female and 79 male)subjects older than 16 years with complete permanent dentition. Subjects were examined according to Occlusal Index (Angle classification of malocclusion, overjet, overbite, dental arch crowding and tooth rotation) and IOTN index. We conduct survey regarding which indexes are used in deciding on orthodontic treatment need, among primary health care and Orthodontist. The present study show differences between the presence of malocclusion and treatment need as assessed by these two used indices. Based on the survey that we conduct all primary health care doctors use Occlusal Index to decide need for orthodontic treatment, more than 95% of orthodontic specialist use Occlusal Index for treatment need estimation. When measuring and grading treatment needs we should rely on Index of orthodontic treatment need. In such high demand for orthodontic treatment need it is necessary to establish need for the orthodontic treatment as fundamental, so that individuals with greatest treatment need can be assigned priority.

Effect of fluoride mouthwash on tensile strength of stainless steel orthodontic archwires

Science.gov (United States)

Fatimah, D. I.; Anggani, H. S.; Ismah, N.

2017-08-01

Patients with orthodontic treatment are commonly recommended to use a fluoride mouthwash for maintaining their oral hygiene and preventing dental caries. However, fluoride may affect the characteristics of stainless steel orthodontic archwires used during treatment. The effect of fluoride mouthwash on the tensile strength of stainless steel orthodontic archwires is still unknown. The purpose of this study is to know the effect of fluoride mouthwash on the tensile strength of stainless steel orthodontic archwires. Examine the tensile strength of 0.016 inch stainless steel orthodontic archwires after immersion in 0.05%, 100 ml fluoride mouthwash for 30, 60, and 90 min. There is no statistically significant difference in the tensile strength of stainless steel orthodontic archwires after immersed in fluoride mouthwash. The p-values on immersion fluoride mouthwash for 30, 60, and 90 min consecutively are 0.790; 0.742; and 0.085 (p > 0.05). The use of fluoride mouthwash did not have an effect on the tensile strength of stainless Steel orthodontic archwires.

A Case-Based Learning Model in Orthodontics.

Science.gov (United States)

Engel, Francoise E.; Hendricson, William D.

1994-01-01

A case-based, student-centered instructional model designed to mimic orthodontic problem solving and decision making in dental general practice is described. Small groups of students analyze case data, then record and discuss their diagnoses and treatments. Students and instructors rated the seminars positively, and students reported improved…

The orthodontic-periodontic interrelationship in integrated treatment challenges: a systematic review.

Science.gov (United States)

Gkantidis, N; Christou, P; Topouzelis, N

2010-05-01

Orthodontic treatment aims at providing an acceptable functional and aesthetic occlusion with appropriate tooth movements. These movements are strongly related to interactions of teeth with their supportive periodontal tissues. In recent years, because of the increased number of adult patients seeking orthodontic treatment, orthodontists frequently face patients with periodontal problems. Aesthetic considerations, like uneven gingival margins or functional problems resulting from inflammatory periodontal diseases should be considered in orthodontic treatment planning. Furthermore, in cases with severe periodontitis, orthodontics may improve the possibilities of saving and restoring a deteriorated dentition. In modern clinical practice, the contribution of the orthodontist, the periodontist and the general dentist is essential for optimized treatment outcomes. The purpose of this systematic review is to highlight the relationship between orthodontics and periodontics in clinical practice and to improve the level of cooperation between dental practitioners. Potentials and limitations that derive from the interdisciplinary approach of complex orthodontic-periodontal clinical problems are discussed.

Distortion of CAD-CAM-fabricated implant-fixed titanium and zirconia complete dental prosthesis frameworks.

Science.gov (United States)

Al-Meraikhi, Hadi; Yilmaz, Burak; McGlumphy, Edwin; Brantley, William A; Johnston, William M

2018-01-01

Computer-aided design and computer-aided manufacturing (CAD-CAM)-fabricated titanium and zirconia implant-supported fixed dental prostheses have become increasingly popular for restoring patients with complete edentulism. However, the distortion level of these frameworks is not well known. The purpose of this in vitro study was to compare the 3-dimensional (3D) distortion of CAD-CAM zirconia and titanium implant-fixed screw-retained complete dental prostheses. A master edentulous model with 4 implants at the positions of the maxillary first molars and canines was used. Multiunit abutments (Nobel Biocare) secured to the model were digitally scanned using scan bodies and a laboratory scanner (S600 ARTI; Zirkonzahn). Titanium (n=5) and zirconia (n=5) frameworks were milled using a CAD-CAM system (Zirkonzahn M1; Zirkonzahn). All frameworks were scanned using an industrial computed tomography (CT) scanner (Nikon/X-Tek XT H 225kV MCT Micro-Focus). The direct CT scans were reconstructed to generate standard tessellation language (STL) files. To calculate the 3D distortion of the frameworks, STL files of the CT scans were aligned to the CAD model using a sum of the least squares best-fit algorithm. Surface comparison points were placed on the CAD model on the midfacial aspect of all teeth. The 3D distortion of each direct scan to the CAD model was calculated. In addition, color maps of the scan-to-CAD comparison were constructed using a ±0.500 mm color scale range. Both materials exhibited distortion; however, no significant difference was found in the amount of distortion from the CAD model between the materials (P=.747). Absolute values of deviations from the CAD model were evident in the x and y plane and less so in the z direction. Zirconia and titanium frameworks showed similar 3D distortion compared with the CAD model for the tested CAD-CAM and implant systems. The distortion was more pronounced in the horizontal and sagittal plane than in the vertical plane

THE EFFECTIVNESS OF CHRONIC GINGIVITES TREATMENT IN PATIENTS WITH NON-REMOVABLE ORTHODONTIC APPARATUS ACCORDING TO THE RESULTS OF PERIODONTAL TISSUES INDEX ASSESSMENT

Directory of Open Access Journals (Sweden)

Ye. Ya. Kostenko

2017-07-01

Full Text Available Background. The risk of chronic gingivitis is increased in patients who undergo orthodontic treatment. It is known that the gingivitis is closely correlated with the level of hygiene. Objective. The study involved 123 orthodontic patients with chronic catarrhal and hypertrophic gingivitis that developed during the first two months of active orthodontic treatment. We chose VITIS ORTНODONTIС (DENTAID INTERNATIONAL, Spain that contains active ingredients we need to support healthy state of oral cavity. All studied patients were 12-15 years old. Methods. For dental examination we used health indices OHI-S according to Greene-Vermillion (1964. Gums bleeding was determined according to a modified SBI index by Muhlemann (1971, inflammation of the gingival margin was assessed by PMA index Parma (1960. Results. Therapeutic treatment consisted of the following: all patients underwent correction of oral hygiene, removal of dental plaque. Vitis ORTHODONTIC was prescribed due to the manufacturer's recommendations: rinse 15 ml for 30 seconds after normal procedures of oral hygiene. Eating or drinking is not recommended during the next 30 minutes after using this product. The results proved a high anti-inflammatory efficacy of the treatment schemes. Conclusions. The complex therapy of early manifestations of inflammation in periodontal had a positive effect on the subjective feelings of patients and health performance rate, gum inflammation and bleeding.

Artefacts in multimodal imaging of titanium, zirconium and binary titanium–zirconium alloy dental implants: an in vitro study

Science.gov (United States)

Schöllchen, Maximilian; Aarabi, Ghazal; Assaf, Alexandre T; Rendenbach, Carsten; Beck-Broichsitter, Benedicta; Semmusch, Jan; Sedlacik, Jan; Heiland, Max; Fiehler, Jens; Siemonsen, Susanne

2017-01-01

Objectives: To analyze and evaluate imaging artefacts induced by zirconium, titanium and titanium–zirconium alloy dental implants. Methods: Zirconium, titanium and titanium–zirconium alloy implants were embedded in gelatin and MRI, CT and CBCT were performed. Standard protocols were used for each modality. For MRI, line–distance profiles were plotted to quantify the accuracy of size determination. For CT and CBCT, six shells surrounding the implant were defined every 0.5 cm from the implant surface and histogram parameters were determined for each shell. Results: While titanium and titanium–zirconium alloy induced extensive signal voids in MRI owing to strong susceptibility, zirconium implants were clearly definable with only minor distortion artefacts. For titanium and titanium–zirconium alloy, the MR signal was attenuated up to 14.1 mm from the implant. In CT, titanium and titanium–zirconium alloy resulted in less streak artefacts in comparison with zirconium. In CBCT, titanium–zirconium alloy induced more severe artefacts than zirconium and titanium. Conclusions: MRI allows for an excellent image contrast and limited artefacts in patients with zirconium implants. CT and CBCT examinations are less affected by artefacts from titanium and titanium–zirconium alloy implants compared with MRI. The knowledge about differences of artefacts through different implant materials and image modalities might help support clinical decisions for the choice of implant material or imaging device in the clinical setting. PMID:27910719

Titanium exposure and yellow nail syndrome

Directory of Open Access Journals (Sweden)

Ali Ataya

2015-01-01

Full Text Available Yellow nail syndrome is a rare disease of unclear etiology. We describe a patient who develops yellow nail syndrome, with primary nail and sinus manifestations, shortly after amalgam dental implants. A study of the patient's nail shedding showed elevated nail titanium levels. The patient had her dental implants removed and had complete resolution of her sinus symptoms with no change in her nail findings. Since the patient's nail findings did not resolve we do not believe titanium exposure is a cause of her yellow nail syndrome but perhaps a possible relationship exists between titanium exposure and yellow nail syndrome that requires further studies.

Surgical-orthodontic treatment of patients suffering from severe periodontal disorders - a clinical case study.

Science.gov (United States)

Halimi, Abdelali; Zaoui, Fatima

2013-09-01

Orthodontic or, more precisely, surgico-orthodontic treatment of patients suffering from periodontal disorders generally requires a multidisciplinary approach by a qualified dental team. Periodontal bone healing is an essential factor for successful orthodontic treatment in a compromised periodontal situation. We report on the case of an adult patient suffering from severe chronic periodontitis; he was a hyperdivergent skeletal Class III with dento-alveolar compensation, esthetic problems and a significant lack of dental material. A multidisciplinary approach was adopted. First of all, periodontal treatment was undertaken (root scaling and planing) accompanied by appropriate medical treatment and a bone graft to strengthen the area of the lower incisors. After that, surgical and orthodontic treatment to correct the malocclusion was begun. The difficulty lay in the significant absence of dental material to ensure proper intercuspation. A surgical repositioning splint was constructed on an articulator to ensure adequate mandibular retraction after maxillary advancement surgery. After treatment, the missing teeth were replaced by a prosthesis. Following treatment, the periodontal bone resorption was stabilized; the bone deficit was improved and the malocclusion had been corrected; the missing teeth were replaced by appropriate dentures. Short- and medium-term follow-up confirmed the stability of the results obtained, which will be discussed. The right combination of properly managed orthodontic, periodontal and prosthetic treatment can contribute to effective elimination of chronic periodontitis, even at an advanced stage in an adult patient, while at the same time improving esthetic and functional parameters. Copyright © 2013. Published by Elsevier Masson SAS.

Kinetics of salivary pH after acidic beverage intake by patients undergoing orthodontic treatment.

Science.gov (United States)

Turssi, Cecilia P; Silva, Carolina S; Bridi, Enrico C; Amaral, Flavia Lb; Franca, Fabiana Mg; Basting, Roberta T

2015-01-01

The saliva of patients undergoing orthodontic treatment with fixed appliances can potentially present a delay in the diluting, clearing, and buffering of dietary acids due to an increased number of retention areas. The aim of this clinical trial was to compare salivary pH kinetics of patients with and without orthodontic treatment, following the intake of an acidic beverage. Twenty participants undergoing orthodontic treatment and 20 control counterparts had their saliva assessed for flow rate, pH, and buffering capacity. There was no significant difference between salivary parameters in participants with or without an orthodontic appliance. Salivary pH recovery following acidic beverage intake was slower in the orthodontic subjects compared to controls. Patients with fixed orthodontic appliances, therefore, seem to be at higher risk of dental erosion, suggesting that dietary advice and preventive care need to be implemented during orthodontic treatment.

How Do Patients and Parents Decide for Orthodontic Treatment-Effects of Malocclusion, Personal Expectations, Education and Media.

Science.gov (United States)

Tuncer, C; Canigur Bavbek, N; Balos Tuncer, B; Ayhan Bani, A; Çelik, B

2015-01-01

To examine patients' and parents' perceptions and expectations from orthodontic treatment. 491 patients (274 female, 217 male) aged 14-22 years, and 399 parents (245 female, 154 male) completed a questionnaire about preferences, needs and expectations about orthodontic treatment, and scored the present problem. Continuous variables were compared by Mann-Whitney U and Kruskal-Wallis tests, whereas Chi-square test was used for categorical variables. Patients'(77.1%) and parents'(84.6%), decision about orthodontic treatments were influenced by suggestion of dentists. Patients who decided to attend to clinic by themselves were higher than parents (p=0.006). Dental aesthetics was the determinant factor for treatment demand for patients(61.0%) and parents(57.3%). Improvement in oral functions was more important for Class III patients than Class I patients (p=0.040). Adult patients/parents with higher education gave more importance to oral functions as well as dental aesthetics (p=0.031). There was no difference among Angle classifications regarding orthodontic problem scores. Parents found media sources valuable (p=0.018) but majority expected dentists for information about orthodontic treatments. Education degree of adult patients/parents effected this decision(p=0.002). Desire to have better dental aesthetics was the primary motivating factor for all participants. Clinicians should consider concerns of Class III patients about oral functions during treatment planning.

Patients knowledge about side effects of orthodontic treatment

Directory of Open Access Journals (Sweden)

Mia Amalia

2011-07-01

Full Text Available Disharmonious of dental arrangement can possibly create problems for the patient, such as the masticatory function, esthetical, psychosocial, and also the increased risk of trauma and periodontal disease. These are reasons for a patient to seek orthodontic treatment. The aim of this study was to know the patient’s knowledge about the side effects possibility that they receive during orthodontic treatment. The side effects include pain experience during orthodontic treatment, the possibility of soft tissue damage, email demineralization, loss of tooth vitality, periodontal problem, root resorption, temporomandibular joint disorders, and relapse. A cross-sectional study was conducted in patients who registered at Orthodontic Department, Faculty of Dentistry, Universitas Indonesia on March-June 2009. The participants of this study were 100 patients, consist of 86 women and 14 men respectively. Twenty-seven questions about the side-effects of orthodontic treatment were used to obtain the patient’s knowledge and the result was categorized into 3 groups, good, average and poor. The result of the study showed that patient’s knowledge about the side effect of pain experience during orthodontic treatment was average and the patient’s knowledge about the possibility of soft tissue damage due to orthodontic treatment was good. However, the patient’s knowledge about the possibility of email demineralization, loss of tooth vitality, periodontal problem, root resorption, temporomandibular joint disorders and relapse due to orthodontic treatment was low.

Highly cited orthodontic articles from 2000 to 2015.

Science.gov (United States)

Prevezanos, Panagiotis; Tsolakis, Apostolos I; Christou, Panagiotis

2018-01-01

Identification of highly cited articles based on the h-index and its properties is important for the evaluation of the past, present, and future of any research discipline. In this study, we aimed to identify the h-classic articles in orthodontics. One search on the Web of Science identified all articles from 2000 to 2015 in the 89 journals indexed by the 2015 InCites Journal Citation Reports in the scientific area "dentistry, oral surgery, and medicine." A second search was performed in the Web of Science using all mesh terms related to orthodontics. Then, we applied the h-classic method to select the recent articles with the greatest scientific impact in orthodontics. Eighty articles were considered as h-classic articles. They were published in 20 of the 89 dental journals of the 2015 InCites Journal Citation Reports list. Only 36 articles appeared in orthodontic journals: 23 in the American Journal of Orthodontics & Dentofacial Orthopedics (28.8%), 7 in The Angle Orthodontist (8.8%), and 6 in European Journal of Orthodontics (7.5%). Thirty-eight articles originated from Europe, 28 from the Americas, and 14 from the Middle East and Asia. More than half of fundamental orthodontic research is published in nonorthodontic journals showing that our field is currently limited, and interactions with other research fields should be sought to increase orthodontic research importance and appeal. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Effect of membranes and porous hydroxyapatite on healing in bone defects around titanium dental implants. An experimental study in monkeys

DEFF Research Database (Denmark)

Gotfredsen, K; Warrer, K; Hjørting-Hansen

1991-01-01

The purpose of the present study was to examine the effect of treating bony craters around titanium dental implant with polytetrafluoroethylene membranes (PTFE), with and without grafting of hydroxyapatite (HA), and with HA alone. 4 standardized bone defects were prepared in the alveolar ridge...

Orthodontic treatment considerations in Down syndrome patients

Directory of Open Access Journals (Sweden)

Sianiwati Goenharto

2012-03-01

Full Text Available Background: Down syndrome is an easily recognized congenital disease anomaly, a common autosomal chromosomal anomaly with high prevalence of malocclusion. Orthodontic treatment demand should be high but it seems difficult to be done because of specific condition of disability. Purpose: The purpose of this literature review was to discribe the orthodontic problems found in Down syndrome patients and several consideration that shoud be done to treat them. Reviews: Many studies report the high prevalence of malocclusion among people with Down syndrome. There is a greater frequency of clas III relationship, crossbite, crowding and also open bite. Several problems might appear in the treatment because of dental, medical, mental, and behavioural factor. Conclusion: It is concluded that orthodonic treatment can be performed in Down syndrome patient, although several difficulties may appear. Good consideration in mental, behavior, medical and also dental condition will influence whether the treatment will success or not. Special care and facilities will support the orthodontic treatment.Latar belakang: Sindroma Down adalah suatu kelainan congenital yang mudah dikenali, merupakan kelaian kromosom autosomal yang cukup banyak terjadi, dengan prevalensi maloklusi cukup tinggi. Seharusnya permintaan akan perawatan ortodonti juga tinggi meskipun tampaknya sulit dilakukan karena adanya kondisi ketidakmampuan/cacat yang spesifik. Tujuan: Tujuan studi pustaka ini adalah untuk menggambarkan problem perawatan ortodonti pada penderita sindroma Down dan pertimbangan apa yang sebaiknya diambil untuk mengatasi masalah tersebut. Tinjauan pustaka: Banyak penelitian melaporkan tentang prevalensi maloklusi yang tinggi pada penderita sindroma Down. Maloklusi yang sering dijumpai adalah relasi klas III, gigitan silang, berdesakan dan juga gigitan terbuka. Problem dapat terjadi saat perawatan ortodonti karena adanya faktor dental, medis, mental dan tingkah laku penderita

Orthodontic treatment of an unerupted mandibular canine tooth in a patient with mixed dentition: a case report.

Science.gov (United States)

Dinoi, Maria Teresa; Marchetti, Enrico; Garagiola, Umberto; Caruso, Silvia; Mummolo, Stefano; Marzo, Giuseppe

2016-06-10

The aim of this case report was to describe the surgical-orthodontic treatment of an unerupted mandibular canine tooth in a 9-year-old girl. A 9-year-old white girl presented with an unerupted right mandibular canine tooth. Combined surgical-orthodontic treatment was performed to correct dental impaction and to achieve good aesthetic and functional results. Orthodontic treatment achieved all of the required objectives.

Laser Applications in Orthodontics

Science.gov (United States)

Heidari, Somayeh; Torkan, Sepideh

2013-01-01

A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

Synthesis of Titanium Oxycarbide from Titanium Slag by Methane-Containing Gas

Science.gov (United States)

Dang, Jie; Fatollahi-Fard, Farzin; Pistorius, Petrus Christiaan; Chou, Kuo-Chih

2018-02-01

In this study, reaction steps of a process for synthesis of titanium oxycarbide from titanium slag were demonstrated. This process involves the reduction of titanium slag by a methane-hydrogen-argon mixture at 1473 K (1200 °C) and the leaching of the reduced products by hydrofluoric acid near room temperature to remove the main impurity (Fe3Si). Some iron was formed by disproportionation of the main M3O5 phase before gaseous reduction started. Upon reduction, more iron formed first, followed by reduction of titanium dioxide to suboxides and eventually oxycarbide.

Nickel titanium springs versus stainless steel springs: A randomized clinical trial of two methods of space closure.

Science.gov (United States)

Norman, Noraina Hafizan; Worthington, Helen; Chadwick, Stephen Mark

2016-09-01

To compare the clinical performance of nickel titanium (NiTi) versus stainless steel (SS) springs during orthodontic space closure. Two-centre parallel group randomized clinical trial. Orthodontic Department University of Manchester Dental Hospital and Orthodontic Department Countess of Chester Hospital, United Kingdom. Forty orthodontic patients requiring fixed appliance treatment were enrolled, each being randomly allocated into either NiTi (n = 19) or SS groups (n = 21). Study models were constructed at the start of the space closure phase (T0) and following the completion of space closure (T1). The rate of space closure achieved for each patient was calculated by taking an average measurement from the tip of the canine to the mesiobuccal groove on the first permanent molar of each quadrant. The study was terminated early due to time constraints. Only 30 patients completed, 15 in each study group. There was no statistically significant difference between the amounts of space closed (mean difference 0.17 mm (95%CI -0.99 to 1.34; P = 0.76)). The mean rate of space closure for NiTi coil springs was 0.58 mm/4 weeks (SD 0.24) and 0.85 mm/4 weeks (SD 0.36) for the stainless steel springs. There was a statistically significant difference between the two groups (P = 0.024), in favour of the stainless steel springs, when the mean values per patient were compared. Our study shows that stainless steel springs are clinically effective; these springs produce as much space closure as their more expensive rivals, the NiTi springs.

Cytocompatibility of a free machining titanium alloy containing lanthanum.

Science.gov (United States)

Feyerabend, Frank; Siemers, Carsten; Willumeit, Regine; Rösler, Joachim

2009-09-01

Titanium alloys like Ti6Al4V are widely used in medical engineering. However, the mechanical and chemical properties of titanium alloys lead to poor machinability, resulting in high production costs of medical products. To improve the machinability of Ti6Al4V, 0.9% of the rare earth element lanthanum (La) was added. The microstructure, the mechanical, and the corrosion properties were determined. Lanthanum containing alloys exhibited discrete particles of cubic lanthanum. The mechanical properties and corrosion resistance were slightly decreased but are still sufficient for many applications in the field of medical engineering. In vitro experiments with mouse macrophages (RAW 264.7) and human bone-derived cells (MG-63, HBDC) were performed and revealed that macrophages showed a dose response below and above a LaCl3 concentration of 200 microM, while MG-63 and HBDC tolerated three times higher concentrations without reduction of viability. The viability of cells cultured on disks of the materials showed no differences between the reference and the lanthanum containing alloy. We therefore propose that lanthanum containing alloy appears to be a good alternative for biomedical applications, where machining of parts is necessary.

Effect of material variation on the biomechanical behaviour of orthodontic fixed appliances: a finite element analysis.

Science.gov (United States)

Papageorgiou, Spyridon N; Keilig, Ludger; Hasan, Istabrak; Jäger, Andreas; Bourauel, Christoph

2016-06-01

Biomechanical analysis of orthodontic tooth movement is complex, as many different tissues and appliance components are involved. The aim of this finite element study was to assess the relative effect of material alteration of the various components of the orthodontic appliance on the biomechanical behaviour of tooth movement. A three-dimensional finite element solid model was constructed. The model consisted of a canine, a first, and a second premolar, including the surrounding tooth-supporting structures and fixed appliances. The materials of the orthodontic appliances were alternated between: (1) composite resin or resin-modified glass ionomer cement for the adhesive, (2) steel, titanium, ceramic, or plastic for the bracket, and (3) β-titanium or steel for the wire. After vertical activation of the first premolar by 0.5mm in occlusal direction, stress and strain calculations were performed at the periodontal ligament and the orthodontic appliance. The finite element analysis indicated that strains developed at the periodontal ligament were mainly influenced by the orthodontic wire (up to +63 per cent), followed by the bracket (up to +44 per cent) and the adhesive (up to +4 per cent). As far as developed stresses at the orthodontic appliance are concerned, wire material had the greatest influence (up to +155 per cent), followed by bracket material (up to +148 per cent) and adhesive material (up to +8 per cent). The results of this in silico study need to be validated by in vivo studies before they can be extrapolated to clinical practice. According to the results of this finite element study, all components of the orthodontic fixed appliance, including wire, bracket, and adhesive, seem to influence, to some extent, the biomechanics of tooth movement. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Medical emergencies in a dental office: inhalation and ingestion of orthodontic objects.

Science.gov (United States)

Bilder, Leon; Hazan-Molina, Hagai; Aizenbud, Dror

2011-01-01

The authors reviewed the literature regarding inhalation and ingestion of orthodontic appliances and suggest ways to manage and prevent these events. The authors conducted literature searches of free text and Medical Subject Headings terms by using PubMed and Embase databases and selected appropriate studies. They analyzed retrieved articles according to several parameters: inhalation or ingestion event, number of cases, patient's sex and age, type of orthodontic appliance, in-office event or out-of-office event, and medical treatment. The authors found a total of 2,279 articles in their preliminary search. Eighteen reports of 24 cases from this search met all of the search criteria (that is, clinical studies, case reports or reviews limited to English, Hebrew or Arabic on any form of aspiration or inhalation of orthodontic appliances). Most cases (67 percent) involved ingested objects, and of those cases, the majority (57 percent) occurred in female patients. Most cases (85 percent) occurred outside the orthodontist's office. Seventeen patients (71 percent) had been treated with a fixed orthodontic appliance. In 60 percent of cases, the maxilla was involved. With one exception, no severe complications were reported (only seven patients were examined in a hospital emergency department), and patients were discharged uneventfully from the orthodontic office or emergency department. Orthodontists and team members should participate in medical emergency management courses that emphasize the use of guidelines in cases of inhalation or ingestion of orthodontic objects. Each orthodontist's office should develop written emergency protocols for out-of-office events and present them to patients and their parents at the start of treatment.

Correlations between the changes in patients' dental-facial morphology at the end of the orthodontic treatment and the psychological variables.

Science.gov (United States)

Vaida, Ligia; Pirte, Adriana; Corega, Claudia; Slăvescu, D; Muţiu, Gabriela

2009-01-01

The purpose of this research was to assess the impact that the improvement of patients' dental-facial morphology has at the end of the orthodontic treatment upon the following psychological variables: self-esteem, current self-related thoughts as well as upon the variables of social self-esteem and performance. The number of patients included in the study was of 168 (82 children and 86 adolescents) who carried out the orthodontic treatment. At the end of the active treatment, we applied to all patients the assessment instruments for the level of self- esteem and self-related current thoughts: the Rosenberg's Self-Esteem Scale and the Heatherton & Polivy Current Thoughts Scale. As far as the patients in the study are concerned, the improvement of their facial aspect at the end of the treatment showed a significantly positive correlation with the variables of global self-esteem, self-related current thoughts, social self-esteem and performance, with the exception of the girls in children study group who showed no correlations between physical aspect and the performance variable.

Structure and properties of Titanium for dental implants

Directory of Open Access Journals (Sweden)

M. Greger

2009-10-01

Full Text Available This paper describes manufacture of nano-structural titanium, its structure and properties. Nano-titanium has higher specific strength properties than ordinary (coarse-grained titanium. Nano-titanium was produced by the equal-channel angular pressing (ETAP process. The research it self was focused on physical base of strengthening and softening processes and developments occurring at the grain boundaries during the ECAP process at half-hot temperature. Strength of nano-titanium varies around 960 MPa, grain size around 300 nm.

Management of impacted all canines with surgical exposure and alignment by orthodontic treatment

Directory of Open Access Journals (Sweden)

Radha Katiyar

2013-01-01

Full Text Available Canine impaction is a dental problem very often encountered in orthodontic practice. After the third molar, the canine is the most frequently impacted tooth. Bringing the impacted canine into a normal position is important for functional occlusion and the final esthetics of the orthodontic treatment. This article illustrates a peculiar case, in which all four permanent canines maintained their unerupted status at age of 16 years. All four impacted canines were surgically exposed, attachment bonded, traction given with K-9 spring and ideally positioned with fixed orthodontic mechanotherapy.

the orthodontic management of an adult with sickle cell disease

African Journals Online (AJOL)

2015-09-01

Sep 1, 2015 ... a patient with Sickle Cell Disease (SCD) needs ortho- dontic treatment ... Orthodontic Management. 215. Measures ... under strict control by the Dental Hygienists to avoid ... Ghana. Pediatrics 2008; 121 (suppl 2): 120-121. 2.

Deflection and Flexural Strength Effects on the Roughness of Aesthetic-Coated Orthodontic Wires

OpenAIRE

Albuquerque, Cibele Gonçalves de; Correr, Américo Bortolazzo; Venezian, Giovana Cherubini; Santamaria Jr, Milton; Tubel, Carlos Alberto; Vedovello, Silvia Amélia Scudeler

2017-01-01

Abstract The aim was to evaluate the flexural strength and the effects of deflection on the surface roughness of esthetic orthodontic wires. The sample consisted of 70 archwire 0.014-inch: polytetrafluorethylene (PTFE)-coated Nickel-Titanium (Niti) archwires (Titanol Cosmetic-TC, Flexy Super Elastic Esthetic-FSE, esthetic Nickel Titanium Wire-ANT); epoxy resin-coated Niti archwires (Spectra-S, Niticosmetic-TEC); gold and rhodium coated Niti (Sentalloy-STC) and a control group (superelastic Ni...

Quality assessment of orthodontic radiography in children.

Science.gov (United States)

Pakbaznejad Esmaeili, Elmira; Ekholm, Marja; Haukka, Jari; Waltimo-Sirén, Janna

2016-02-01

Numbers of dental panoramic tomographs (DPTs) and lateral cephalometric radiographs (LCRs) outweigh other radiographic examinations in 7- to 12-year-old Finns. Orthodontists and general practitioners (GPs) involved in orthodontics hold therefore the highest responsibility of the exposure of children to ionising radiation with its risks. Against this background, lack of reports on the quality of orthodontic radiography is surprising. The purpose of our study was to shed some light and draw the awareness of the orthodontic community on the subject by analyzing the quality of orthodontic radiography in Oral Healthcare Department of City of Helsinki, in the capital of Finland. We analyzed randomly selected 241 patient files with DPTs and 118 patient files with LCRs of 7- to 12-year-olds for the indications of radiography, quality of referrals, status of interpretation, and number of failed radiographs. The majority of DPTs (95%) and all LCRs had been ordered for orthodontic reasons. Of the DPTs, 60% were ordered by GPs, and of the LCRs, 64% by orthodontists. The referrals were adequate for most DPTs (78%) and LCRs (73%), orthodontists being responsible for the majority of inadequate referrals. Of the DPTs, 80% had been interpreted. Of the LCRs, 65% lacked interpretation, but 67% had been analysed cephalometrically. Failed radiographs, leading to repeated exposure, were found in 2-3%. The quality assessment revealed that orthodontic radiography may not completely fulfill the criteria of good practice. Our results stress further need of continuing education in radiation protection among both orthodontists and GPs involved in orthodontics. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Orthodontic mechanics using mini-implant measured by FBG

Science.gov (United States)

Trannin, Pamela G.; Milczewski, Maura S.; de Oliveira, Walmir; Guariza Filho, Odilon; Lopes, Stephani C. P. S.; Kalinowski, Hypolito J.

2015-07-01

The magnitude of the force generated during orthodontic mechanics anchored in mini-implant in a maxilla model was analyzed. Data was collected during the insertion of the mini-implant and at the moment of applying forces to the structure of the maxilla and dentition. To obtain quantitative results, the Fibre Bragg Gratings (FBG) were inserted in an elastomeric material reproducing a maxilla model. It was observed levels of forces of approximately 3,78N next to the root of first premolar by the insertion of the mini-implant and different levels of the force to different orthodontic mechanics applied on the dental system.

Oral health with fixed appliances orthodontics

Directory of Open Access Journals (Sweden)

Konta, Brigitte

2008-03-01

Full Text Available Orthodontic treatment represents an important fraction in dental interventions. According to other medical methods the question for scientific evidence for the effectiveness of these treatments arises. The question of the effectiveness is connected with the question what is understood as an effect. In principle, the effect of the intervention is understood on the basis of the occlusion or dental health, what disregards further functions of oral health. The generalization to oral health is therefore a necessary consideration in science now. If one appreciates this further development, then there is no one single randomised study available which examines the long-term effect of the orthodontic intervention or for the effects on the oral health. The question, whether the application of a fixed appliance in an orthodontic treatment causes a long-term improvement in oral health, cannot be answered at the present time. The scientific status is the definition of oral health at present. Also the question, whether in the long run the dental health can be improved by fixed appliances cannot be answered with a quality usually achieved by evidence-based medicine. Whether correction of a dental malposition is an effective prerequisite for the preservation of the natural teeth, cannot be answered. There is no generalizing study with sufficient scientific background for Europe or Germany to this topic. The risk for caries cannot be quantified. Caries is identified as a central topic in general but due to numerous factors influencing the risk it is not quantified. The question of the indications is completely open from the scientific literature. For the question of the therapy need or therapy priority some indexes were developed, which lead to a quantification. These indices however are fundamentally criticised by recent research in their meaning and the empirical relevance. There is an impression that there exists a big gap between the practical application

Dental and skeletal changes in mild to moderate Class II malocclusions treated by either a Twin-block or Xbow appliance followed by full fixed orthodontic treatment.

Science.gov (United States)

Ehsani, Sayeh; Nebbe, Brian; Normando, David; Lagravere, Manuel O; Flores-Mir, Carlos

2015-11-01

To compare the short-term skeletal and dental effects of two-phase orthodontic treatment including either a Twin-block or an XBow appliance. This was a retrospective clinical trial of 50 consecutive Class II cases treated in a private practice with either a Twin-block (25) or XBow (25) appliance followed by full fixed orthodontic treatment. To factor out growth, an untreated Class II control group (25) was considered. A MANOVA of treatment/observation changes followed by univariate pairwise comparisons showed that the maxilla moved forward less in the treatment groups than in the control group. As for mandibular changes, the corpus length increase was larger in the Twin-block group by 3.9 mm. Dentally, mesial movement of mandibular molars was greater in both treatment groups. Although no distalization of maxillary molars was found in either treatment group, restriction of mesial movement of these teeth was seen in both treatment groups. Both treatment groups demonstrated increased mandibular incisor proclination with larger increases for the XBow group by 3.3°. The Wits value was decreased by 1.6 mm more in the Twin-block group. No sex-related differences were observed. Class II correction using an XBow or Twin-block followed by fixed appliances occurs through a relatively similar combination of dental and skeletal effects. An increase in mandibular incisor inclination for the XBow group and an increased corpus length for the Twin-block group were notable exceptions. No overall treatment length differences were seen.

[Exploring a new method for superimposition of pre-treatment and post-treatment mandibular digital dental casts in adults].

Science.gov (United States)

Dai, F F; Liu, Y; Xu, T M; Chen, G

2018-04-18

To explore a cone beam computed tomography (CBCT)-independent method for mandibular digital dental cast superimposition to evaluate three-dimensional (3D) mandibular tooth movement after orthodontic treatment in adults, and to evaluate the accuracy of this method. Fifteen post-extraction orthodontic treatment adults from the Department of Orthodontics, Peking University School and Hospital of Stomatology were included. All the patients had four first premolars extracted, and were treated with straight wire appliance. The pre- and post-treatment plaster dental casts and craniofacial CBCT scans were obtained. The plaster dental casts were transferred to digital dental casts by 3D laser scanning, and lateral cephalograms were created from the craniofacial CBCT scans by orthogonal projection. The lateral cephalogram-based mandibular digital dental cast superimposition was achieved by sequential maxillary dental cast superimposition registered on the palatal stable region, occlusal transfer, and adjustment of mandibular rotation and translation obtained from lateral cephalogram superimposition. The accuracy of the lateral cephalogram-based mandibular digital dental cast superimposition method was evaluated with the CBCT-based mandibular digital dental cast superimposition method as the standard reference. After mandibular digital dental cast superimposition using both methods, 3D coordinate system was established, and 3D displacements of the lower bilateral first molars, canines and central incisors were measured. Differences between the two superimposition methods in tooth displacement measurements were assessed using the paired t-test with the level of statistical significance set at Pdigital dental cast superimposition methods in 3D displacements of the lower first molars, and sagittal and vertical displacements of the canines and central incisors; transverse displacements of the canines and central incisors differed by (0.3±0.5) mm with statistical significance

Effect of saliva contamination on cementation of orthodontic brackets using different adhesive systems.

Science.gov (United States)

Robaski, Aliden-Willian; Pamato, Saulo; Tomás-de Oliveira, Marcelo; Pereira, Jefferson-Ricardo

2017-07-01

The enamel condition and the quality of surface are points that need to be considered for achieving optimal efficiency in the treatment with orthodontic brackets. The aim of this study was to assess the immediate bond strength of metallic brackets cemented to dental. Forty human premolars were double-sectioned, placed in PVC matrices and randomly divided into 10 groups (n=8). They received artificial saliva contamination before or after the application of adhesive systems, except for the control groups. The metallic brackets were cemented using two orthodontic cements (Transbond™ Plus Color Change, 3M Unitek e Transbond™ XT Light, 3M Unitek). The specimens were subjected to mechanical shear bond strength testing and classified according to the fracture pattern. The results were analyzed using a two-way ANOVA and Tukey's test for multiple comparisons ( p brackets cemented on the dental enamel. Key words: Bonding, orthodontic brackets, shear bond strength, saliva, adhesive systems.

Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients.

Science.gov (United States)

Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

2018-01-01

The objective of the present study was to compare patients' acceptability, comfort and stress with conventional and digital impressions. Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum ® , Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600 ® , Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients' acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques.

Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients

Science.gov (United States)

Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

2018-01-01

Objective: The objective of the present study was to compare patients’ acceptability, comfort and stress with conventional and digital impressions. Materials and Methods: Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum®, Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600®, Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients’ acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Results: Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Conclusions: Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques. PMID:29492177

Fatigue of orthodontic nickel-titanium (NiTi) wires in different fluids under constant mechanical stress

International Nuclear Information System (INIS)

Prymak, O.; Klocke, A.; Kahl-Nieke, B.; Epple, M.

2003-01-01

The aim of this study was to analyze in vitro the fatigue resistance of nickel-titanium (NiTi) and CuNiTi orthodontic wires when subjected to forces and fluids which are present intraorally. The wires were subjected to dynamic mechanical analysis (DMA) while they were immersed into different fluids with mechanical loading parameters similar to those that are subjected in the mouth. The characteristic temperatures of transitions and a rough surface structure on the perimeter of the wires were determined by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively, before and after the DMA experiments. Stainless steel wires were used for comparison. In general, NiTi wires fractured earlier than the stainless steel specimens. Survival times were lower for the NiTi wires when immersed in fluids (water, citric acid, NaCl solution, artificial saliva, and fluoridated artificial saliva) than in air. SEM surface analysis showed that the NiTi and CuNiTi wires had a rougher surface than steel wires. The fracture occurred within a short number of loading cycles. Until fracture occurred, the mechanical properties remained mostly constant

Fatigue of orthodontic nickel-titanium (NiTi) wires in different fluids under constant mechanical stress

Energy Technology Data Exchange (ETDEWEB)

Prymak, O.; Klocke, A.; Kahl-Nieke, B.; Epple, M

2003-07-25

The aim of this study was to analyze in vitro the fatigue resistance of nickel-titanium (NiTi) and CuNiTi orthodontic wires when subjected to forces and fluids which are present intraorally. The wires were subjected to dynamic mechanical analysis (DMA) while they were immersed into different fluids with mechanical loading parameters similar to those that are subjected in the mouth. The characteristic temperatures of transitions and a rough surface structure on the perimeter of the wires were determined by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively, before and after the DMA experiments. Stainless steel wires were used for comparison. In general, NiTi wires fractured earlier than the stainless steel specimens. Survival times were lower for the NiTi wires when immersed in fluids (water, citric acid, NaCl solution, artificial saliva, and fluoridated artificial saliva) than in air. SEM surface analysis showed that the NiTi and CuNiTi wires had a rougher surface than steel wires. The fracture occurred within a short number of loading cycles. Until fracture occurred, the mechanical properties remained mostly constant.

Orthodontic treatment of an unerupted mandibular canine tooth in a patient with mixed dentition: a case report

OpenAIRE

Dinoi, Maria Teresa; Marchetti, Enrico; Garagiola, Umberto; Caruso, Silvia; Mummolo, Stefano; Marzo, Giuseppe

2016-01-01

Background The aim of this case report was to describe the surgical?orthodontic treatment of an unerupted mandibular canine tooth in a 9-year-old girl. Case presentation A 9-year-old white girl presented with an unerupted right mandibular canine tooth. Combined surgical?orthodontic treatment was performed to correct dental impaction and to achieve good aesthetic and functional results. Conclusion Orthodontic treatment achieved all of the required objectives.

Dental Extrusion with Orthodontic Miniscrew Anchorage: A Case Report Describing a Modified Method

OpenAIRE

Horliana, Ricardo Fidos; Horliana, Anna Carolina Ratto Tempestini; Wuo, Alexandre do Vale; Perez, Fl?vio Eduardo Guillin; Abr?o, Jorge

2015-01-01

In recent years, the skeletal anchorage through miniscrews has expanded the treatment options in orthodontics (Yamaguchi et al., 2012). We hereby present a modified method for tooth extrusion for cases where crown-lengthening surgery is contraindicated for aesthetic reasons. This modified method uses three orthodontic appliances: a mini-implant, an orthodontic wire, and a bracket. The aim of this case report was to increase the length of the clinical crown of a fractured tooth (tooth 23) by m...

Study on the perception of orthodontic treatment according to age: A questionnaire survey.

Science.gov (United States)

Kim, Yoonji

2017-07-01

This questionnaire study aimed to estimate the overall frequencies of positive perception towards orthodontic treatment among adults categorized according to age, sex, and area of living, and to identify barriers or negative perceptions preventing them from receiving orthodontic treatment. The participants included 598 adults aged over 20 years (230 men and 368 women) who visited the Dental Hospital of Seoul St. Mary's Hospital. The participants' opinions regarding their consideration of receiving orthodontic treatment were recorded using a specially designed questionnaire. The overall rate of positive perception towards orthodontic treatment was 48.5%. Compared to adults in their 20s (63.2%), those in their 40s and 50s had a lower percentage of interest in orthodontic treatment (46.2% and 45.1%, respectively; p orthodontic treatment. The middle-aged had a relatively high percentage of interest (above 45%) in orthodontic treatment. However, demographic characteristics were not significantly associated with the positive interest. These results highlight the need for educating the middle-aged about the limitations and possibilities of orthodontic treatment to increase its acceptance.

Critical evaluation of incidence and prevalence of white spot lesions during fixed orthodontic appliance treatment: A meta-analysis.

Science.gov (United States)

Sundararaj, Dhinahar; Venkatachalapathy, Sudhakar; Tandon, Akshay; Pereira, Aaron

2015-01-01

Development of dental caries, specifically, white spot lesions (WSLs), continues to be a well-recognized and troubling side effect of orthodontic fixed appliance therapy, despite vast improvement in preventive dental techniques and procedures. The aim of this meta-analysis is to evaluate, determine, and summarize the incidence and prevalence rates of WSLs during orthodontic treatment that have been published in the literature. According to predetermined criteria, databases were searched for appropriate studies. References of the selected articles and relevant reviews were searched for any missed publications. In the 14 studies evaluated for WSLs, the incidence of new carious lesions formed during orthodontic treatment in patients was 45.8% and the prevalence of lesions in patients undergoing orthodontic treatment was 68.4%. The incidence and prevalence rates of WSLs in patients undergoing orthodontic treatment are quite high and significant. This widespread problem of WSL development is an alarming challenge and warrants significant attention from both patients and providers, which should result in greatly increased emphasis on effective caries prevention.

Bacterial colonization on coated and uncoated orthodontic wires: A prospective clinical trial

OpenAIRE

Seyed Hamid Raji; Hasan Shojaei; Parinaz Saeidi Ghorani; Elahe Rafiei

2014-01-01

Background: The advantages of coated orthodontic wires such as esthetic and their effects on reduced friction, corrosion and allergic reaction and the significant consequences of plaque accumulation on oral health encouraged us to assess bacterial colonization on these wires. Materials and Methods: A total of 18 (9 upper and 9 lower) epoxy resin coated 16 × 22 nickel-titanium wires (Spectra, GAC, USA) and 18 (9 upper and 9 lower) non-coated 16 × 22 nickel-titanium wires (Sentalloy, GAC, U...

Fabrication of titanium removable dental prosthesis frameworks with a 2-step investment coating method.

Science.gov (United States)

Koike, Mari; Hummel, Susan K; Ball, John D; Okabe, Toru

2012-06-01

Although pure titanium is known to have good biocompatibility, a titanium alloy with better strength is needed for fabricating clinically acceptable, partial removable dental prosthesis (RDP) frameworks. The mechanical properties of an experimental Ti-5Al-5Cu alloy cast with a 2-step investment technique were examined for RDP framework applications. Patterns for tests for various properties and denture frameworks for a preliminary trial casting were invested with a 2-step coating method using 2 types of mold materials: a less reactive spinel compound (Al(2)O(3)·MgO) and a less expensive SiO(2)-based material. The yield and tensile strength (n=5), modulus of elasticity (n=5), elongation (n=5), and hardness (n=8) of the cast Ti-5Al-5Cu alloy were determined. The external appearance and internal porosities of the preliminary trial castings of denture frameworks (n=2) were examined with a conventional dental radiographic unit. Cast Ti-6Al-4V alloy and commercially pure titanium (CP Ti) were used as controls. The data for the mechanical properties were statistically analyzed with 1-way ANOVA (α=.05). The yield strength of the cast Ti-5Al-5Cu alloy was 851 MPa and the hardness was 356 HV. These properties were comparable to those of the cast Ti-6Al-4V and were higher than those of CP Ti (PAl-5Cu frameworks was found to have been incompletely cast. The cast biocompatible experimental Ti-5Al-5Cu alloy exhibited high strength when cast with a 2-step coating method. With a dedicated study to determine the effect of sprue design on the quality of castings, biocompatible Ti-5Al-5Cu RDP frameworks for a clinical trial can be produced. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Endodontic complications of root canal therapy performed by dental students with stainless-steel K-files and nickel-titanium hand files.

Science.gov (United States)

Pettiette, M T; Metzger, Z; Phillips, C; Trope, M

1999-04-01

Straightening of curved canals is one of the most common procedural errors in endodontic instrumentation. This problem is commonly encountered when dental students perform molar endodontics. The purpose of this study was to compare the effect of the type of instrument used by these students on the extent of straightening and on the incidence of other endodontic procedural errors. Nickel-titanium 0.02 taper hand files were compared with traditional stainless-steel 0.02 taper K-files. Sixty molar teeth comprised of maxillary and mandibular first and second molars were treated by senior dental students. Instrumentation was with either nickel-titanium hand files or stainless-steel K-files. Preoperative and postoperative radiographs of each tooth were taken using an XCP precision instrument with a customized bite block to ensure accurate reproduction of radiographic angulation. The radiographs were scanned and the images stored as TIFF files. By superimposing tracings from the preoperative over the postoperative radiographs, the degree of deviation of the apical third of the root canal filling from the original canal was measured. The presence of other errors, such as strip perforation and instrument breakage, was established by examining the radiographs. In curved canals instrumented by stainless-steel K-files, the average deviation of the apical third of the canals was 14.44 degrees (+/- 10.33 degrees). The deviation was significantly reduced when nickel-titanium hand files were used to an average of 4.39 degrees (+/- 4.53 degrees). The incidence of other procedural errors was also significantly reduced by the use of nickel-titanium hand files.

Multi-disciplinary approach for enhancing orthodontic esthetics - case report.

Science.gov (United States)

Kalia, Ajit; Mirdehghan, Nasim; Khandekar, Sonali; Patil, Wasu

2015-01-01

In contemporary dental care, an increasing number of adult patients are now seeking orthodontic treatment with the primary motive of improvement in appearance and achievement of esthetic smile. Proper recognition of the dental and facial defects at the outset of treatment is the most important key to esthetic success and is essential in satisfying the patient's needs. By following the rules of Golden proportion smiles can be made attractive, harmonious, symmetrical, and proportionate. Consisted of 22-year-old girl who came for treatment of crowding in maxillary and mandibular arches, abnormal overjet and overbite and had unesthetic peg lateral. Non-extraction therapy was carried out since the patient had good soft tissue drape, alignment was achieved by expanding the arches and moving teeth in ideal axial inclination. Esthetic smile was attained using composite buildup of upper right peg lateral and minor adjunctive surgery (full thickness periodontal graft) on lower right central incisor. The present case report orchestrates interrelationship between various branches of dentistry and orthodontics. It exhibits how multidisciplinary approach can be used to achieve ideal dental esthetics in a 22-year-old girl who was successfully treated for peg shaped lateral incisor, gingival recession, and unesthetic smile.

Adverse reactions to orthodontic appliances in nickel-allergic patients.

Science.gov (United States)

Volkman, Kristen K; Inda, Michael J; Reichl, Peter G; Zacharisen, Michael C

2007-01-01

Nickel allergy (NA) is common and causes more cases of allergic contact dermatitis (ACD) than all other metals combined. Many orthodontic appliances (ODAs) contain nickel but their clinical relevance in nickel-allergic patients is unclear. We aimed to characterize the relationship between NA and ODAs because the medical literature investigating this is controversial. A survey concerning adverse reactions to ODAs in patients with NA was distributed to members of the Wisconsin Society of Orthodontics. Forty-three surveys were analyzed. The surveyed group was experienced, representing a mean of 21.2 years in practice and averaging 242 appliances placed per year per orthodontist. Most new patients with orthodontia were 10-18 years old. Most wires used were nickel-titanium alloy. Although 76% of orthodontists inquired about NA at initial evaluation, 37% still placed nickel-containing ODAs in known nickel-allergic patients. Fifty percent placed a single intraoral appliance, observing for reactions. Three orthodontists applied ODAs to the skin similar to patch testing. Only 8 patients with reactions to ODAs were described in detail, 6 were female patients and 6 were aged 13-14 years. Intraoral and extraoral reactions were mild; diffuse urticaria was reported in one patient. Treatment included removing the appliances or changing to nonnickel alternatives with favorable outcomes. These cases, which included >33,000 patients, suggest a prevalence of 0.03%. Adverse reactions to ODAs in patients with NA have been observed but are uncommon. Using suitable alternatives, patients usually can be accommodated.

Present status of titanium removable dentures--a review of the literature.

Science.gov (United States)

Ohkubo, C; Hanatani, S; Hosoi, T

2008-09-01

Although porcelain and zirconium oxide might be used for fixed partial dental prostheses instead of conventional dental metals in the near future, removable partial denture (RPD) frameworks will probably continue to be cast with biocompatible metals. Commercially pure (CP) titanium has appropriate mechanical properties, it is lightweight (low density) compared with conventional dental alloys, and has outstanding biocompatibility that prevents metal allergic reactions. This literature review describes the laboratory conditions needed for fabricating titanium frameworks and the present status of titanium removable prostheses. The use of titanium for the production of cast RPD frameworks has gradually increased. There are no reports about metallic allergy apparently caused by CP titanium dentures. The laboratory drawbacks still remain, such as the lengthy burn-out, inferior castability and machinability, reaction layer formed on the cast surface, difficulty of polishing, and high initial costs. However, the clinical problems, such as discoloration of the titanium surfaces, unpleasant metal taste, decrease of clasp retention, tendency for plaque to adhere to the surface, detachment of the denture base resin, and severe wear of titanium teeth, have gradually been resolved. Titanium RPD frameworks have never been reported to fail catastrophically. Thus, titanium is recommended as protection against metal allergy, particularly for large-sized prostheses such as RPDs or complete dentures.

An orthodontic bracket embedded in the medial pterygoid surface: a case report.

Science.gov (United States)

Wilmott, Sheryl E; Ikeagwuani, Okechukwu; McLeod, Niall M H

2016-03-01

There is a potential risk that orthodontic brackets can become dislodged into the aerodigestive tract. This case illustrates the management of an orthodontic bracket, which became embedded in the deep tissues of the oropharynx. We aim to highlight the potential risk misplaced dental instruments and materials pose, including that they may become embedded in the soft tissues of the throat and suggest that that this possibility should be considered when they cannot be localized.

Caries risk and orthodontic treatment.

Science.gov (United States)

Opsahl Vital, Sibylle; Haignere-Rubinstein, Claire; Lasfargues, Jean-Jacques; Chaussain, Catherine

2010-03-01

It is now established that orthodontic treatment increases the risk of carious lesions, with consequent harm to the patient and a high risk of compromising treatment outcome. This risk is related to the appliances, which increase the number of sites where plaque can accumulate as well as to changes in the bacterial flora and the age of the patient. A thorough evaluation of the risk of caries is therefore needed before any appliance is put in place and further evaluations should then be performed regularly throughout the course of treatment. In addition, preventive measures should be taken, involving first and foremost educating and motivating patients regarding the need for good oral hygiene. Prevention also implies adequate usage of the various sources of local fluoride administration, notably the application of fluoride-rich varnish. Other prophylactic measures such as using chlorhexidine varnish and sealing dental grooves are also recommended. Finally, the orthodontist can reduce to a minimum the use of items likely to retain dental plaque such as bands and elastomeric ties. The aim of this article is to suggest a specific diagnostic approach and to present the scientifically validated prevention measures, which need to be applied throughout orthodontic treatment. Copyright 2010 CEO. Published by Elsevier Masson SAS. All rights reserved.

Prevention and management of accidental foreign body ingestion and aspiration in orthodontic practice

Directory of Open Access Journals (Sweden)

Umesan UK

2012-05-01

Full Text Available Uday Kumar Umesan,1 Kui Lay Chua,1 Priya Balakrishnan21National Dental Centre, 2Kg Kiarong, Bandar Seri Begawan, Brunei DarussalamAbstract: Among the myriad emergencies that could arise in the dental clinical setting there are a few that occur occasionally despite being entirely preventable. Ingestion or aspiration of dental materials, appliances, or instruments comprises this category. Regardless of incidence, foreign body ingestion or aspiration episodes are recognized as potential complications in the specialty of orthodontics. Despite their infrequent occurrence, the morbidity from a single incident and the amount of specialty medical care that may be needed to manage such incidents is too high to ignore. There is also the associated risk of malpractice litigation given the fact that these incidents are preventable. At present, no clear guidelines exist regarding prevention of this emergency in practice. This article attempts to review relevant literature and aims to formulate certain recommendations based on best available evidence to minimize the incidence of such events, while also suggesting guidelines toward making their management more effective. A flow chart outlining management options and strategies to aid the clinician in the event of such an emergency is also presented.Keywords: foreign bodies, ingestion, orthodontics, respiratory aspiration, orthodontic appliances

Apicotomy as Treatment for Failure of Orthodontic Traction

Directory of Open Access Journals (Sweden)

Leandro Berni Osório

2013-01-01

Full Text Available Objective. The purpose of this study was to present a case report that demonstrated primary failure in a tooth traction that was subsequently treated with apicotomy technique. Case Report. A 10-year-old girl had an impacted upper right canine with increased pericoronal space, which was apparent on a radiographic image. The right maxillary sinus showed an opacity suggesting sinusitis. The presumptive diagnosis was dentigerous cyst associated with maxillary sinus infection. The plan for treatment included treatment of the sinus infection and cystic lesion and orthodontic traction of the canine after surgical exposure and bonding of an orthodontic appliance. The surgical procedure, canine position, root dilaceration, and probably apical ankylosis acted in the primary failure of the orthodontic traction. Surgical apical cut of the displaced teeth was performed, and tooth position in the dental arch was possible, with a positive response to the pulp vitality test. Conclusion. Apicotomy is an effective technique to treat severe canine displacement and primary orthodontic traction failure of palatally displaced canines.

Orthodontic space closure versus prosthetic replacement of missing upper lateral incisors in patients with bilateral cleft lip and palate.

Science.gov (United States)

Oosterkamp, Barbara C M; Dijkstra, Pieter U; Remmelink, Hendrik J; van Oort, Robert P; Sandham, Andrew

2010-11-01

To compare dental aesthetics and function of orthodontic space closure versus prosthetic replacement of upper lateral incisors in patients with bilateral cleft lip and palate. The predominant mode of prosthetic replacement was resin-bonded bridges. The retrospective study group consisted of 17 patients treated with orthodontic space closure (13 men, four women; median age, 27.1 years; interquartile range, 20.6 to 33.3 years) and 10 patients treated with prosthetic replacement (five men, five women; median age, 27.7 years; interquartile range, 20.9 to 39.7 years). Dental aesthetics were evaluated by the patients and by a professional panel. Mandibular function was evaluated by means of the mandibular function impairment questionnaire. The level of mandibular impairment was calculated using the Function Impairment Rating Scale. With respect to dental aesthetics, no significant differences between patients treated with orthodontic space closure and prosthetic replacement were found. With respect to function, the level of mandibular impairment was significantly higher in patients treated with prosthetic replacement compared with patients treated with orthodontic space closure, as indicated by high scores on specific masticatory functions. Orthodontic space closure and prosthetic replacement in bilateral cleft lip and palate patients produce similar results in terms of aesthetics. In terms of function, prosthetic replacement results in significantly more impairment of specific masticatory functions.

ALGORITHM FOR TREATMENT OF PATIENTS WITH MESIAL OCCLUSION USING PROPRIETARY ORTHODONTIC DEVICE.

Science.gov (United States)

Flis, P; Filonenko, V; Doroshenko, N

2017-10-01

Early elimination of dentoalveolar apparatus orthodontic disorders is the dominant concept in the treatment technique. to present a sagittal anomalies treatment algorithm, of Class III particularly, in the transitional bite period by the proposed design of individual orthodontic devices with a movable ramp. The treatment algorithm consisted of several blocks: the motivation, the etiological factors establishment, the plan and treatment tactics creation basing on careful diagnosis, the stages of the active period of treatment and the patient management in the retention period. Anthropometric measurements of the maxilla and mandible models were performed to determine the degree of dental arches development. The length of the dental arches was determined on the models by the Nance method in combination with the Huckaba method and the sagital dimensions by the Mirgasizov's method. The leading role in the patients examination was taken by lateral cephalograms analyzing using the Sassouni Plus method. The proposed construction of an orthodontic appliance consists of a plastic base, a vestibular arc, retaining clasps and a ramp, which is connected with a base with two torsion springs. To demonstrate the effectiveness of the proposed construction, an example of the patient Y. treatment of at the age of 6 years 9 months is presented. After the treatment, positive morphological, functional and aesthetic changes were established. The usage of proposed orthodontic appliance with movable ramp allows to start orthodontic treatment at early age, increases its effectiveness and reduce the number of complications. The expediency of stage-by-stage treatment is approved by a positive results of such method. To achieve stable results, it is important to individualize their prognosis even at the planning stage of orthodontic treatment.

A Surgery-first approach in surgical-orthodontic treatment of mandibular prognathism--a case report.

Science.gov (United States)

Yu, Chung-Chih; Chen, Po-Hsun; Liou, Eric J W; Huang, Chiung-Shing; Chen, Yu-Ray

2010-01-01

The conventional approach in orthodontic surgery treatment of dentofacial anomalies requires a varied period of pre-surgical orthodontic treatment. This presurgical period is considered to be important for adequate surgical treatment and stable results. This period is usually long bothersome for patients because dental decompensation is required and there is consequent deterioration of aesthetics and function, especially in cases of skeletal Class III occlusion. At Chang Gung Craniofacial Center, a surgery-first approach (SFA), i.e. minimal pre-surgical orthodontics, is one of the treatment choices for Class III patients. In this report, we present a 19-year-old man with mandibular prognathism, an anterior open bite and severe dental crowding treated with SFA. The patient received orthognathic surgery a week after bracing of the teeth. The operation and recovery were uneventful as well as the following orthodontic treatment. The total treatment time was only four months, much shorter than with the conventional approach. The patient benefitted from immediate improvement of the facial profile after surgery, and a much shorter total treatment, and the results were not compromised. We believe in selected cases, SFA is a good and effective treatment alternative.

Comparison of changes in irregularity and transverse width with nickel-titanium and niobium-titanium-tantalum-zirconium archwires during initial orthodontic alignment in adolescents: A double-blind randomized clinical trial.

Science.gov (United States)

Nordstrom, Barrett; Shoji, Toshihiro; Anderson, W Cameron; Fields, Henry W; Beck, F Michael; Kim, Do-Gyoon; Takano-Yamamoto, Teruko; Deguchi, Toru

2018-05-01

The purpose of this prospective, double-blind, randomized clinical trial was to compare the clinical efficiency of nickel-titanium (NiTi) and niobium-titanium-tantalum-zirconium (TiNbTaZr) archwires during initial orthodontic alignment. All subjects (ages between 12 and 20 years) underwent nonextraction treatment using 0.022-inch brackets. All patients were randomized into two groups for initial alignment with 0.016-inch NiTi archwires (n = 14), or with 0.016-inch TiNbTaZr archwires (n = 14). Digital scans were taken during the course of treatment and were used to compare the improvement in Little's Irregularity Index and the changes in intercanine and intermolar widths. There was approximately a 27% reduction in crowding during the first month with the use of 0.016-inch TiNbTaZr (Gummetal) wire, and an additional 25% decrease in crowding was observed during the next month. There was no significant difference between the two treatment groups in the decrease in irregularity over time ( P = .29). There was no significant difference between the two groups in the changes in intercanine and intermolar width ( P = .80). It can be concluded that Gummetal wires and conventional NiTi wires possess a similar ability to align teeth, and Gummetal wires have additional advantages over conventional NiTi, such as formability and use in patients with nickel allergy.

Fractal Structures on Silica Aerogels Containing Titanium: A Small Angle Neutron Scattering Study

International Nuclear Information System (INIS)

Widya Sari; Dian Fitriyani; Abdul Aziz Mohamed; Noordin Ibrahim

2009-01-01

Full text: The fractal structure of silica aerogels containing titanium has been investigated by means of small-angle neutron scattering (SANS) technique. The SANS experiments were conducted using a 36 meter SANS BATAN spectrometer (SMARTer) in Serpong, Indonesia in the range of momentum transfer Q, 0.006 -1 ) < 0.3. The power-law for a fractal object scattering Q-D observed from all measured samples. The Fourier transform of pattern I(Q) a pair correlation model function was implemented in analyzing the structure factor from the power-law scattering profiles. The results are showing that the silica aerogels containing titanium has a mass fractal where its dimension DM is larger than the pure silica aerogels. The mass fractal dimension of silica aerogels containing titanium is relatively constant between 2.23 to 2.40 with the decrease of acid concentrations during a sol-gel process and formed a nanometer size of aggregate. Those fractal structures were simulated using a Delphi language and the results are presented in this paper. (author)

Biocompatibility of dental alloys

Energy Technology Data Exchange (ETDEWEB)

Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

2001-10-01

Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

Novel diamond-coated tools for dental drilling applications.

Science.gov (United States)

Jackson, M J; Sein, H; Ahmed, W; Woodwards, R

2007-01-01

The application of diamond coatings on cemented tungsten carbide (WC-Co) tools has been the subject of much attention in recent years in order to improve cutting performance and tool life in orthodontic applications. WC-Co tools containing 6% Co metal and 94% WC substrate with an average grain size of 1 - 3 microm were used in this study. In order to improve the adhesion between diamond and WC substrates it is necessary to etch cobalt from the surface and prepare it for subsequent diamond growth. Alternatively, a titanium nitride (TiN) interlayer can be used prior to diamond deposition. Hot filament chemical vapour deposition (HFCVD) with a modified vertical filament arrangement has been employed for the deposition of diamond films to TiN and etched WC substrates. Diamond film quality and purity has been characterized using scanning electron microscopy (SEM) and micro Raman spectroscopy. The performances of diamond-coated WC-Co tools, uncoated WC-Co tools, and diamond embedded (sintered) tools have been compared by drilling a series of holes into various materials such as human tooth, borosilicate glass, and acrylic tooth materials. Flank wear has been used to assess the wear rates of the tools when machining biomedical materials such as those described above. It is shown that using an interlayer such as TiN prior to diamond deposition provides the best surface preparation for producing dental tools.

Prosthetic considerations for orthodontic implant site development in the adult patient.

Science.gov (United States)

Holst, Alexandra I; Nkenke, Emeka; Blatz, Markus B; Geiselhöringer, Hans; Holst, Stefan

2009-11-01

Proper site development is a key factor for long-term clinical success of dental implants. Whereas surgical and restorative techniques have been refined to ensure predictable functional and esthetic outcome, individual clinical prerequisites do not always allow proper placement of implants when prosthetic and material properties are considered. Orthodontic tooth movement may be a viable and nonsurgical site development treatment option. With the introduction and advancements of minimal invasive and less visible orthodontic appliances, a growing number of adult patients are willing to obtain orthodontic treatment. The spectrum of modern appliances is broad and ranges from clear aligners to lingual brackets. Skeletal anchorage devices such as orthodontic mini-implants often eliminate unpopular external anchorage devices (ie, headgear) in adult patients, This article discusses the selection of an appropriate pretreatment approach by taking patient-specific criteria into account.

[Orthodontics--periodontics: yesterday and today; a review of the literature].

Science.gov (United States)

Reichert, Christoph; Kasaj, Adrian; Willershausen, Brita

2009-01-01

The dental disciplines of orthodontics and periodontics keep a variety of contact points. The development of new treatment options in periodontics and orthodontics, e.g., guided tissue regeneration or orthodontic implants for temporary skeletal anchorage, offer new ways in treatment of periodontally affected patients. The present work is a review of studies and treatment plans in the past thirty years and scrutinises their topicality and evidence. The performance of a systematic review of literature led to a low number of resulting articles. For this reason and their heterogeneity it was not possible to perform a quantifying review. Our results lead to the conclusion that this certain scope of interdisciplinary therapy has further demand for studies with high quality standards and evidence.

Efficacy of fluoride varnish for preventing white spot lesions and gingivitis during orthodontic treatment with fixed appliances-a prospective randomized controlled trial.

Science.gov (United States)

Kirschneck, Christian; Christl, Jan-Joachim; Reicheneder, Claudia; Proff, Peter

2016-12-01

The development of white spot lesions around orthodontic brackets and gingivitis is a common problem during orthodontic treatment with fixed appliances. This prospective randomized double-blind controlled clinical trial investigated the preventive efficacy of a one-time application of two commonly used fluoride varnishes in patients with low to moderate caries risk. Ninety adolescent orthodontic patients with a low to moderate caries risk were prospectively randomized to three groups of 30 patients each: (1) standardized dental hygiene with fluoride toothpaste and one-time application of placebo varnish (control) or (2) of elmex® fluid or (3) of Fluor Protector S on all dental surfaces at the start of fixed therapy. The extent of enamel demineralization and gingivitis was determined with the ICDAS and the gingivitis index (GI) at baseline and after 4, 12, and 20 weeks. Each treatment group showed a significant increase of the ICDAS index, but not of the GI over the course of time with no significant intergroup differences detectable. A one-time application of fluoride varnish at the start of orthodontic treatment did not provide any additional preventive advantage over sufficient dental hygiene with fluoride toothpaste with regard to formation of white spots and gingivitis in patients with a low to moderate caries risk. In dental practice, patients often receive an application of fluoride varnish at the start of orthodontic treatment with fixed appliances. However, the efficacy of this procedure is still unclear.

Occlusal features and need for orthodontic treatment in persons with osteogenesis imperfecta

Science.gov (United States)

Binh, Ho Duy; Nguyen, Khac Minh; Maasalu, Katre; Kõks, Sulev; Märtson, Aare; Saag, Mare; Jagomägi, Triin

2017-01-01

Abstract The aim of the study was to (a) analyse dental occlusion and determine the need for orthodontic treatment of persons with osteogenesis imperfecta (OI) in comparison with the healthy population and (b) investigate the associations between OI and malocclusion. A case‐control study included 26 OI persons and 400 healthy participants (control group). Occlusal features and the need for orthodontic treatment were defined according to Dental Health Component‐Index of Orthodontic Treatment Need and Dental Aesthetic Index. Results showed that Angle Class I, II, and III relationship was found in 23.1%, 3.8%, and 73.1% of OI group, and in the control group, it was 67%, 17.5%, and 15.5%, respectively. OI group had significantly higher prevalence of reverse overjet >1 mm (76.9%), missing teeth (42.3%), posterior crossbite (34.6%), and open bite >2 mm (19.2%) compared to the control group (8.5%, 2.2%, 6.2%, and 3.5%, respectively). OI group had less incisal segment crowding and more incisal segment spacing than the control group (p  1 mm (OR = 13.3, 95% CI = 3.9–44.7, p < .001), Angle Class III malocclusion (OR = 8.0, 95% CI = 2.0–30.8, p = .003), and missing teeth (OR = 4.7, 95% CI = 1.0–22.4, p = .049). In conclusion, there is the high probability of malocclusion in OI persons. Persons with OI require early orthodontic treatment because of significant correlation of OI disease with Angle Class III malocclusion, reverse overjet, and missing teeth. PMID:29744175

Orthodontic applications of a superelastic shape-memory alloy model

International Nuclear Information System (INIS)

Glendenning, R.W.; Enlow, R.L.

2000-01-01

During orthodontic treatment, dental appliances (braces) made of shape memory alloys have the potential to provide nearly uniform low level stresses to dentitions during tooth movement over a large range of tooth displacement. In this paper we model superelastic behaviour of dental appliances using the finite element method and constitutive equations developed by F. Auricchio et al. Results of the mathematical model for 3-point bending and several promising 'closing loop' designs are compared with laboratory results for the same configurations. (orig.)

Surgical, Orthodontic and Prosthodontic Rehabilitation of a Patient with Follicular Ameloblastoma: A Case Report

Science.gov (United States)

Sailer, Herman F.; Tarawneh, Fadi; Fourkas, Panagiotis; Antoniades, Dimitrios Z.; Athanasiou, Athanasios E.

2010-01-01

This case report describes the combined surgical, orthodontic and prosthodontic rehabilitation of an adult female patient with a previous history of follicular ameloblastoma, which was treated through partial mandibulectomy and an immediate replacement of missing bone with an autologous calvarial bone graft. Orthodontic treatment was undertaken in order to restore occlusal disturbances and obtain sufficient space for two dental implants and an optimum prosthodontic rehabilitation. PMID:20396452

Oral health: orthodontic treatment.

Science.gov (United States)

Martonffy, Andrea Ildiko

2015-01-01

Improper tooth alignment due to crowding, malocclusion, and missing teeth can cause difficulties with eating and speech, and premature wear. It is estimated that more than 20% of children would benefit from orthodontic treatment to correct these conditions, many of which will persist into adulthood if not corrected. Orthodontic care is gaining popularity among adults for similar concerns, as well as for correction of cosmetic issues. The psychological effects of malocclusion should not be ignored. The American Association of Orthodontists recommends that all children undergo evaluation at the first recognition of an orthodontic condition and no later than age 7 years. Some children will need early treatment to help eliminate developing conditions and improve the foundations of the bite, which can ease later treatment in adolescence. For others, treatment in adolescence without early treatment is recommended. Standard cemented braces or clear, removable aligners may be used, depending on the patient's corrective needs. Average treatment time is approximately 2 years; this may be shortened by the use of accelerative techniques. Routine preventive dental care should be continued during the treatment period. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Dental pulp stone formation during orthodontic treatment: A ...

African Journals Online (AJOL)

2015-06-21

Jun 21, 2015 ... the presence of dental pulp stone, gender, age, tooth type and arches. Results: Dental pulp ... primary and permanent dentition.[1] Dental pulp stones .... interpretation provided training to familiarize the other observer with the ...

Lingual mandibular osteonecrosis after dental impressions for orthodontic study models.

Science.gov (United States)

Cerruto, Carmen; Ugolini, Alessandro; Cozzani, Mauro

2018-03-01

A 43-year-old man sought orthodontic treatment to close anterior diastemas. During the impression procedure for routine documentation, the orthodontic assistant exerted excessive pressure on the metallic tray; 2 days later, the patient reported the detachment of a small piece of mucosa overlying the mylohyoid crest and was referred to a maxillofacial surgeon with a diagnosis of lingual mandibular osteonecrosis. The etiology of bony osteonecrosis is discussed, together with the anatomic variations that can be present in the basal bone and that must be carefully checked before an impression is taken. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

The Rise of Indian Orthodontics: A Historical Perspective

Directory of Open Access Journals (Sweden)

Meha Verma Teja

2013-01-01

Full Text Available This article presents the evolution of dentistry and in particular orthodontics, in India. We have come a long way since dental education was first introduced to us Indians, the wave of change brought about by the most esteemed and respectable pioneers of our profession, have led us to form a strong dental community in this world of tough competition. This article also presents the work of the great achievers of orthodontia, who have helped us raise the level of ′Indian Orthodontics′ and have enabled us to soar to greater heights.

Systemic levels of metallic ions released from orthodontic mini-implants.

Science.gov (United States)

de Morais, Liliane Siqueira; Serra, Glaucio Guimarães; Albuquerque Palermo, Elisabete Fernandes; Andrade, Leonardo Rodrigues; Müller, Carlos Alberto; Meyers, Marc André; Elias, Carlos Nelson

2009-04-01

Orthodontic mini-implants are a potential source of metallic ions to the human body because of the corrosion of titanium (Ti) alloy in body fluids. The purpose of this study was to gauge the concentration of Ti, aluminum (Al), and vanadium (V), as a function of time, in the kidneys, livers, and lungs of rabbits that had Ti-6Al-4V alloy orthodontic mini-implants placed in their tibia. Twenty-three New Zealand rabbits were randomly divided into 4 groups: control, 1 week, 4 weeks, and 12 weeks. Four orthodontic mini-implants were placed in the left proximal tibia of 18 rabbits. Five control rabbits had no orthodontic mini-implants. After 1, 4, and 12 weeks, the rabbits were killed, and the selected tissues were extracted and prepared for analysis by graphite furnace atomic absorption spectrophotometry. Low amounts of Ti, Al, and V were detectable in the 1-week, 4-weeks, and 12-weeks groups, confirming that release of these metals from the mini-implants occurs, with diffusion and accumulation in remote organs. Despite the tendency of ion release when using the Ti alloy as orthodontic mini-implants, the amounts of metals detected were significantly below the average intake of these elements through food and drink and did not reach toxic concentrations.

[Orthodontic and oral surgery therapy in cleidocranial dysplasia].

Science.gov (United States)

Balaton, Gergely; Tarján, Ildikó; Balaton, Péter; Barabási, Zoltán; Gyulai Gál, Szabolcs; Nagy, Katalin; Vajó, Zoltán

2007-02-01

A cleidocranial dysplasia is an autosomal dominant inherited condition consisting of generalized skeletal disorder. Associated dental signs are present in 93,5%; failure of tooth eruption with multiple supernumerary teeth, dilaceration of roots, crown germination, microdontia, high arched palate, midface hypoplasia, high gonion angle. The molecular- genetic analysis revealed a missense mutation in the CBFA1 gene located on chromosome 6p21, which is considered to be etiological factor for CCD. Orthodontic and oral surgery therapy of a 13 year-old child with CCD was performed due to aesthetic and functional problems. The supernumerary germs were removed and the teeth were aligned with orthodontic appliances. Temporary functional rehabilitation was solved with partial denture. The presented case and the literature data support the importance of early diagnosis of CCD. The good collaboration of the orthodontic and maxillo-facial surgery specialists help achieve the correct rehabilitation of the patient.

Treating dental crowding with mandibular incisor extraction in an Angle Class I patient

Directory of Open Access Journals (Sweden)

Gislana Braga Machado

2015-06-01

Full Text Available Mandibular dental crowding often encourages patients to seek orthodontic treatment. The orthodontist should decide between protrusion of incisors or decrease in dental volume so as to achieve proper alignment and leveling. The present study reports the treatment of an Angle Class I malocclusion adolescent female brachyfacial patient with severe mandibular dental crowding, increased curve of Spee and deep overbite. The patient was treated with extraction of a mandibular incisor. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

Extraction protocols for orthodontic treatment: A retrospective study

Directory of Open Access Journals (Sweden)

Vaishnevi N Thirunavukkarasu

2016-01-01

Full Text Available Background and Objectives: Various extraction protocols have been followed for successful orthodontic treatment. The purpose of this study was to evaluate the extraction protocols in patients who had previously undergone orthodontic treatment and also who had reported for continuing orthodontic treatment from other clinics. Materials and Methods: One hundred thirty eight patients who registered for orthodontic treatment at the Faculty of Dentistry were divided into 10 extraction protocols based on the Orthodontic treatment protocol given by Janson et al. and were evaluated for statistical significance. Results: The descriptive statistics of the study revealed a total of 40 (29% patients in protocol 1, 43 (31.2% in protocol 2, 18 (13% in protocol 3, 16 (11.6% in protocol 5, and 12 (8.7% in Type 3 category of protocol 9. The Type 3 category in protocol 9 was statistically significant compared to other studies. Midline shift and collapse of the arch form were noticed in these individuals. Conclusion: Extraction of permanent teeth such as canine and lateral incisors without rational reasons could have devastating consequences on the entire occlusion. The percentage of cases wherein extraction of permanent teeth in the crowded region was adopted as a treatment option instead of orthodontic treatment is still prevalent in dental practice. The shortage of orthodontists in Malaysia, the long waiting period, and lack of subjective need for orthodontic treatment at an earlier age group were the reasons for the patient's to choose extraction of the mal-aligned teeth such as the maxillary canine or maxillary lateral incisors.

Acid Neutralizing Ability and Shear Bond Strength Using Orthodontic Adhesives Containing Three Different Types of Bioactive Glass

Directory of Open Access Journals (Sweden)

Song-Yi Yang

2016-02-01

Full Text Available The objective of the study was to compare the acid neutralizing ability and shear bond strength (SBS of three different types of orthodontic adhesives containing bioactive glasses (BAGs. 45S5, 45S5F and S53P4 BAGs were prepared using the melting technique and ground to fine particles. Orthodontic adhesives containing three types of BAGs were prepared as follows: 52.5% 45S5 BAG + 17.5% glass (45S5_A; 61.25% 45S5 BAG + 8.75% glass (45S5_B; 52.5% 45S5F BAG + 17.5% glass (45S5F_A; 61.25% 45S5F BAG + 8.75% glass (45S5F_B; 52.5% S53P4 BAG + 17.5% glass (S53P4_A; 61.25% S53P4 BAG + 8.75% glass (S53P4_B; and 70.0% glass (BAG_0. To evaluate the acid neutralizing properties, specimens were immersed in lactic acid solution, and pH changes were measured. SBS was measured with a universal testing machine. For all of the BAG-containing adhesives, the one with 61.25% of BAG showed a significantly greater increase of pH than the one with 52.5% of BAG (p < 0.05. Groups with 61.25% of BAG showed lower SBS than samples with 52.5% of BAG. 45S5F_A showed no significant difference of SBS compared to BAG_0 (p > 0.05. The adhesive containing 61.25% of 45S5F BAG exhibited clinically acceptable SBS and acid neutralizing properties. Therefore, this composition is a suitable candidate to prevent white spot lesions during orthodontic treatment.

Patients' expectations of orthodontic treatment: part 2--findings from a questionnaire survey.

Science.gov (United States)

Sayers, M S; Newton, J T

2007-03-01

To describe patients' and their parents' expectations of orthodontic treatment. A questionnaire survey of 100 patients and their primary care-givers attending a new patient orthodontic consultant clinic, at a teaching hospital. GKT Orthodontic Department, King's College Dental Hospital, London, UK. The sample consisted of 100 participants who completed the questionnaire, including 50 patients aged 12-14 years who had been referred to the orthodontic department for treatment. One parent of each patient was also invited to participate. Participants completed a valid questionnaire measure of orthodontic expectations that was tested for reliability and validity. Descriptive analysis of the responses was undertaken, and comparisons of children's and parents' expectations, in addition to ethnicity, were made. Patients and parents have similar expectations of treatment, with the exception of expectations of duration of orthodontic treatment (Pexpectations of the initial orthodontic assessment visit, the likelihood of wearing headgear, the impact of orthodontic treatment on diet, and the reaction of peers to treatment (Pexpectations regarding the initial visit, headgear and dietary restrictions (Pparents share similar expectations of orthodontic treatment for most aspects of care, although parents are more realistic in their estimation of the duration of treatment and the initial visit. The expectations of patients differ from those of their parents with regard to dietary and drink restrictions in relation to orthodontic treatment. Ethnicity significantly influences expectations of orthodontic treatment, and this may relate to differences in the patients' and their parents' assessed outcome of care.

Orthodontic treatment need in a Spanish young adult population

Science.gov (United States)

Montiel-Company, José M.; Manzanera-Pastor, David; Almerich-Silla, José M.

2012-01-01

Objectives: Orthodontic treatment need has often been assessed in child populations, but few studies employing internationally-recognized indices have been conducted in adult or young adult populations. The aim of this study was to determine the orthodontic treatment need of a young adult population in Spain by means of the Dental Aesthetic Index (DAI), the Index of Orthodontic Treatment Need (IOTN) and the need perceived by the patients. Study design: A cross-sectional epidemiological study was conducted in a broad, representative sample of 671 adults aged between 35 and 44 years using health centers in the Valencia Region of Spain, following the recommendations of the World Health Organization (WHO). Results: Orthodontic treatment was required by 31.3% of the sample according to the DAI and 19.2% according to the IOTN (DHC). The orthodontic treatment need perceived by the patients was 21.1%. On relating treatment need to different variables, significant differences in patient perception were encountered by gender, as women perceived a greater need (23.9%) than men (14.4%). Significant differences in previous orthodontic treatment history were found between middle/high (15%) and low (9%) social class and between secondary/tertiary (14%) and primary (3.3%) education. Conclusions: There was no agreement between the treatment need assessed objectively by the indices and that perceived by the patient, or between the indices themselves. The decision to undergo orthodontic treatment can depend on socioeconomic and psychological factors and on values and principles that do not easily lend themselves to objective measurement. Key words:Orthodontics, epidemiology, adult, malocclusion. PMID:22322504

Anterior mandibular apical base augmentation in the surgical orthodontic treatment of mandibular retrusion.

Science.gov (United States)

Brusati, R; Giannì, A B

2005-12-01

The authors describe a surgical technique alternative to traditional pre-surgical orthodontics in order to increase the apical base in mandibular retrusion (class II, division I). This subapical osteotomy, optimizing inferior incisal axis without dental extractions and a long orthodontic treatment, associated to genioplasty permits to obtain an ideal labio-dento-mental morphology. This procedure avoids in some cases the need of a mandibular advancement and, if necessary, it reduces his entity with obvious advantages.

Deep bite malocclusion: exploration of the skeletal and dental factors

International Nuclear Information System (INIS)

Bhateja, N.K.; Fida, M.; Shaikh, A.

2016-01-01

Correction of deep bite is crucial for maintenance of dental hard and soft tissue structures and for prevention of temporomandibular joint disorders. Exploration of underlying skeletal and dental factors is essential for efficient and individualized treatment planning. To date etiological factors of dental and skeletal deep bite have not been explored in Pakistani orthodontic patients. The objectives of this study were to explore frequencies of dental and skeletal etiological factors in deep bite patients and to determine correlations amongst dental and skeletal etiological factors of deep bite. Methods: The study included a total of 113 subjects (males=35; females=78) with no craniofacial syndromes or prior orthodontic treatment. Pre-treatment orthodontic records were used to evaluate various dental and skeletal parameters. Descriptive statistics of each parameter were calculated. The various study parameters were correlated using Pearson's Correlation. Results: Deep curve of Spee was most frequently seen factor of dental deep bite (72.6%), followed by increased coronal length of upper incisors (28.3%), retroclined upper incisors (17.7%), retroclined lower incisors (8%) and increased coronal length of lower incisors (5.3%). Decreased gonial angle was most commonly found factor of skeletal deep bite (43.4%), followed by decreased mandibular plane angle (27.4%) and maxillary plane's clockwise rotation (26.5%). Frankfort mandibular plane angle and gonial angle showed a strong positive correlation (r=0.66, p=0.000). Conclusions: Reduced gonial angle is most frequently seen skeletal factor, signifying the importance of angulation and growth of ramus in development of deep bite. Deep curve of Spee is most frequently seen dental etiological component in deep bite subjects, hence signifying the importance of intruding the lower anterior teeth. (author)

Quality Assurance in Custom Dental Devices: A Technologist's Perspective.

Science.gov (United States)

Griffin, Anthony

2017-12-01

Manufacturing of custom-made dental devices such as removable dentures, fixed prosthodontics and orthodontics are subject to the requirements of the Medical Devices Directive (MDD). Many dental laboratories often enhance these requirements by implementing quality assurance procedures that then provide enhanced consistency. this paper provides a dental technologist's view of some of the systems currently being used in dental laboratories to provide a quality assured product and associated issues.

Psychosocial predictors of affect in adult patients undergoing orthodontic treatment.

Science.gov (United States)

Peñacoba, Cecilia; González, M José; Santos, Noelia; Romero, Martín

2014-02-01

In this paper we propose to study the role of psychosocial variables in affect in adult patients undergoing orthodontic treatment, considering that affect is a key variable in treatment adherence. Seventy-four patients (average age 33,24 ± 10,56) with metal multibracket-fixed orthodontic treatment were included. Patients were assessed twice. The first stage, at the beginning of treatment, included assessment of dental impact (Psychosocial Impact of Dental Aesthetics Questionnaire), trait anxiety (State-Trait Anxiety Inventory), self-esteem (Rosenberg's self-esteem scale), and self-efficacy (General Self-efficacy Scale). In the second stage, 6 months later, positive and negative affect towards treatment was assessed using the Positive and Negative Affect Scale. Dental social impact differentiates between patients with high and low negative affect, while self-efficacy differentiates between patients with high and low positive affect. Trait anxiety and self-esteem differentiate between both types of affect (positive and negative). Trait anxiety and self-esteem (when trait anxiety weight is controlled) are significant predictor variables of affective balance. These results have important practical implications, because it seems essential to adopt a bio-psychosocial model incorporating assessment methods focusing on day-to-day changes in mood and well-being.

A clinical investigation of force delivery systems for orthodontic space closure.

Science.gov (United States)

Nightingale, C; Jones, S P

2003-09-01

To investigate the force retention, and rates of space closure achieved by elastomeric chain and nickel titanium coil springs. Randomized clinical trial. Eastman Dental Hospital, London and Queen Mary's University Hospital, Roehampton, 1998-2000. Twenty-two orthodontic patients, wearing the pre-adjusted edgewise appliance undergoing space closure in opposing quadrants, using sliding mechanics on 0.019 x 0.025-inch posted stainless steel archwires. Medium-spaced elastomeric chain [Durachain, OrthoCare (UK) Ltd., Bradford, UK] and 9-mm nickel titanium coil springs [OrthoCare (UK) Ltd.] were placed in opposing quadrants for 15 patients. Elastomeric chain only was used in a further seven patients. The initial forces on placement and residual forces at the subsequent visit were measured with a dial push-pull gauge [Orthocare (UK) Ltd]. Study models of eight patients were taken before and after space closure, from which measurements were made to establish mean space closure. The forces were measured in grammes and space closure in millimetres. Fifty-nine per cent (31/53) of the elastomeric sample maintained at least 50 per cent of the initial force over a time period of 1-15 weeks. No sample lost all its force, and the mean loss was 47 per cent (range: 0-76 per cent). Nickel titanium coil springs lost force rapidly over 6 weeks, following that force levels plateaued. Forty-six per cent (12/26) maintained at least 50 per cent of their initial force over a time period of 1-22 weeks, and mean force loss was 48 per cent (range: 12-68 per cent). The rate of mean weekly space closure for elastomeric chain was 0.21 mm and for nickel titanium coil springs 0.26 mm. There was no relationship between the initial force applied and rate of space closure. None of the sample failed during the study period giving a 100 per cent response rate. In clinical use, the force retention of elastomeric chain was better than previously concluded. High initial forces resulted in high force decay

Risk factors for tobacco susceptibility in an orthodontic population: An exploratory study.

Science.gov (United States)

Jashinsky, Jared Michael; Liles, Sandy; Schmitz, Katy; Ding, Ding; Hovell, Melbourne

2017-08-01

Tobacco use is related to increased periodontal disease, tooth loss, and decreased success of orthodontic appliances, and it may inhibit orthodontic tooth movement. Most smokers start during adolescence. Since most cessation attempts fail, prevention appears necessary. A cross-sectional sample of orthodontic patients reported hypothesized risk factors for smoking and susceptibility to tobacco use initiation. Exploratory analyses regressed susceptibility to tobacco initiation on each hypothesized predictor variable in a separate logistic model that included a standard set of covariates. Significant odds ratios (OR) were found for the presence of a smoker in the home (OR, 2.168; 95% confidence interval [CI], 1.144-4.107), a friend having no-smoking rules in his or her home and car (OR, 0.337; 95% CI, 0.128-0.886), having been offered a cigarette (OR, 4.526; 95% CI, 1.190-17.207), and exposure to tobacco advertisements (OR, 1.910; 95% CI, 1.044-3.496). Peer, family, and environmental factors appear to increase children's susceptibility to smoking in orthodontic populations. Attention to such factors could help dental clinicians to more effectively identify susceptible young patients in need of antismoking advice. Prospective and experimental studies are required to confirm the role that dental clinicians might play in youth smoking prevention. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties

Science.gov (United States)

Rueggeberg, Frederick A.; Niu, Li-na; Mettenberg, Donald; Yiu, Cynthia K. Y.; Blizzard, John D.; Wu, Christine D.; Mao, Jing; Drisko, Connie L.; Pashley, David H.; Tay, Franklin R.

2012-01-01

Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances. PMID:22870322

Orthodontic applications of a superelastic shape-memory alloy model

Energy Technology Data Exchange (ETDEWEB)

Glendenning, R.W.; Enlow, R.L. [Otago Univ., Dunedin (New Zealand). Dept. of Math. and Stat.; Hood, J.A.A. [Dept. of Oral Sciences and Orthodontics, Univ. of Otago, Dunedin (New Zealand)

2000-07-01

During orthodontic treatment, dental appliances (braces) made of shape memory alloys have the potential to provide nearly uniform low level stresses to dentitions during tooth movement over a large range of tooth displacement. In this paper we model superelastic behaviour of dental appliances using the finite element method and constitutive equations developed by F. Auricchio et al. Results of the mathematical model for 3-point bending and several promising 'closing loop' designs are compared with laboratory results for the same configurations. (orig.)

Dentoalveolar Segmental Osteotomy Combined with Orthodontic Treatment for an Impacted and Ankylosed Upper Canine

DEFF Research Database (Denmark)

Aludden, Hanna Cecilia; Jensen, Thomas

2016-01-01

Ankylosis is the abnormal adhesion of alveolar bone to dentin or cementum and commonly seen after traumatic dental injuries. Treatment of impacted and ankylosed teeth solely by orthodontics alignment may be challenging. Consequently, several treatment alternatives have been proposed for the manag....... A dentoalveolar segmental osteotomy with immediate repositioning of an upper canine was performed. One year after final orthodontic treatment a satisfying occlusal and esthetic treatment outcome was obtained....

Characterization of biodegradable polycaprolactone containing titanium dioxide micro and nanoparticles

Czech Academy of Sciences Publication Activity Database

Govorčin Bajsić, E.; Ocelić Bulatović, V.; Šlouf, Miroslav; Šitum, Ana

2014-01-01

Roč. 8, č. 7 (2014), s. 536-540 ISSN 2010-376X R&D Projects: GA TA ČR TE01020118 Institutional support: RVO:61389013 Keywords : morphology * polycaprolactone * thermal properties Subject RIV: EA - Cell Biology http://waset.org/Publication/characterization-of-biodegradable-polycaprolactone-containing-titanium-dioxide-micro-and-nanoparticles/9998694

DNA damage in oral mucosa cells of patients with fixed orthodontic appliances.

Directory of Open Access Journals (Sweden)

Farzin Heravi

2013-12-01

Full Text Available The release of toxic metal ions from orthodontic alloys has induced concerns regarding the biocompatibility of fixed appliances. This study investigated the genotoxic effect of metal appliances in a sample of patients undergoing fixed orthodontic treatment.The study included twenty-five healthy individuals requiring orthodontic therapy in both jaws. The patients were treated by stainless steel orthodontic brackets and nickel-titanium or stainless steel arch wires. The oral mucosa cells were gathered just before the appliance placement and 9 months later. The cells were centrifuged, fixed and dropped onto slides. After staining, the micronucleus (MN assay was used to determine genome alteration. The data were analyzed by paired sample t-test.The mean micronuclei frequency in the buccal mucosa was 10.6 ± 5.7 per 1000 cells before the appliance placement and 9.2 ± 6.37 per 1000 cells 9 months later. No significant difference was found in the MN count before and 9 months after therapy (p=0.336.Under the conditions used in this study, application of fixed orthodontic appliances did not expose healthy individuals to increased risk of DNA damage in oral mucosa cells.

[Pre- and post-surgical orthodontic treatment of mandibular asymmetry and prognathism].

Science.gov (United States)

Chen, Song; Chen, Yang-xi; Hu, Jing

2005-01-01

The purpose of this study was to analyze the pre- and post surgical orthodontic treatment of mandibular asymmetry and prognathism in our hospital, and to summarize some helpful experiences for future clinical work. The data were derived from 21 adults aged from 19 - 28 years who had severe mandibular asymmetry and prognathism. The ANB angle of all patients is from -3 degrees to -8 degrees. The value of wits of all patients is from -7 mm to -14 mm. The deviation of chin point of all patients is from 3 mm to 7 mm. The duration of pre- and post-surgical orthodontic treatment was 10-20 months (mean 18 months) and 5-10 months (mean 7.5 months), respectively. The keys in pre-surgical orthodontic treatment include (1) three dimensional dental decompensation; (2) arch form and transverse discrepancy correction; (3) model surgery and the splint making. The main objective of post surgical orthodontic treatment is to detail the occlusion. Pre- and post surgical orthodontic treatment is essential for the orthognathic treatment of patients with mandibular asymmetry and prognathism.

Special considerations for orthodontic treatment in patients with root resorption

Directory of Open Access Journals (Sweden)

Haru S. Anggani

2010-03-01

Full Text Available Background: Orthodontic treatment needs good consideration especially when there are unfavorable conditions for orthodontic treatment, such as periodontal diseases or tooth with root resorption. Root resorption should not become worse due to orthodontic treatment., All risk factors should be eliminated before orthodontic treatment is started. Otherwise, the goal of orthodontic treatment could be difficult to achieve because of poor dental and or oral health. Purpose: The purpose of this study was to learn more about mechanical factors that could worsen the root resorption that has already been there or even provoke root resorption to develop during orthodontic treatment. Reviews: Resorption of dental root surface is the condition in which cementum is depraved and the damage could also include dentin of dental root. It can occur either physiologically or pathologically due to some causes. The occurrence of the root resorption is suspected because of the biological factor, the tooth condition, the supportive tissue and the mechanical factors. Panoramic x-ray which routinely used to support diagnose in orthodontic cases, can detect root resorption in general, although sometimes periapical x-ray with parallel technique is needed to enhance the diagnosis. Before starting a treatment, the risk factors that suspected as the causes of root resorption should be eliminated, thus the mechanical treatment can be calculated. Conclusion: Orthodontic treatment in patient with root resorption should not escalate the root resorption which already occurs. The treatment should be done effectively by using optimal forces. Giving discontinued forces and avoiding intrusion and torque movements could reduce the risk factors of root resorption.Latar belakang: Keadaan gigi dan jaringan pendukung yang kurang menguntungkan bagi perawatan ortodontik hendaknya membutuhkan perhatian ekstra para klinisi. Kondisi tersebut misalnya adanya penyakit periodontal ataupun adanya

Mechanical properties of orthodontic wires on ceramic brackets associated with low friction ligatures

Directory of Open Access Journals (Sweden)

Fernando KOIKE

2017-03-01

Full Text Available Abstract Introduction Few studies investigated the mechanical properties of orthodontic wires on ceramic brackets associated the ligatures. Objective This study aimed to compare the load-deflection of orthodontic wires with round section of 0.016” made of stainless steel (SS, nickel-titanium (NiTi and glass fiber-reinforced polymer composite (GFRPC. Material and method Sixty specimens obtained from 10 sectioned pre-contoured arches (TP Orthodontics, were divided into 3 groups of 20 according to each type of material (1 esthetic-type wire and 2 not esthetic and length of 50 mm. The methodology consisted of a 3-point bending test using esthetic ceramic brackets (INVU, TP Orthodontics, Edgewise, 0.022”x 0.025” as points of support. The tensile tests were performed on a mechanical test machine, at a speed of 10 mm/min, deflection of 1 mm, 2 mm and 3 mm. Friedman’s Non Parametric Multiple comparisons test was used (P<0.05. Result The nickel-titanium wire presented smaller load/ deflection compared with stainless steel. GFRPC wires had lower strength values among all groups evaluated (P<.05. The steel wire showed permanent deformation after 3 mm deflection, NiTi wire demonstrated memory effect and the esthetic type had fractures with loss of strength. Conclusion It can be concluded that steel wires have high strength values, requiring the incorporation of loops and folds to reduce the load / deflection. NiTi and GFRPC wires produced low levels of force, however the esthetic wire was shown to fracture and break.

Effect of Boron and Titanium Addition on the Hot Ductility of Low-Carbon Nb-Containing Steel

Science.gov (United States)

Liu, Wei-Jian; Li, Jing; Shi, Cheng-Bin; Huo, Xiang-Dong

2015-12-01

The effect of boron and titanium addition on the hot ductility of Nb-containing steel was investigated using hot tensile tests. The fracture surface and the quenched longitudinal microstructure were examined by optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results showed that both steel samples had the similar change from 1,100°C to 700°C. The hot ductility of Nb-containing steel with boron and titanium addition was higher than the steel without boron and titanium in the temperature range of 900-750°C. Because the formation of intergranular ferrite was inhibited by solute boron segregating on the grain boundary, the formation of TiN changed the distribution of Nb- and boron-containing precipitates and improved the amount of intragranular ferrite.

The effects of natural compounds-containing mouthrinses on patients with fixed orthodontic appliance treatment: clinical and microbiological outcomes.

Science.gov (United States)

Chen, Yong; Wong, Ricky W K; Seneviratne, Chaminda Jayampath; Hagg, Urban; McGrath, Colman; Samaranayake, Lakshman P

2013-11-01

To investigate the effects of two natural compounds-containing mouthrinses (NCCMs) (a fructus mume (FM) extract-containing mouthrinse and an essential oil (EO)-containing mouthrinse) on gingival health and microbial profiles in young orthodontic patients. This 6-month randomized, single-blinded, parallel-controlled clinical trial consists of 90 patients with fixed appliance treatment. The subjects were allocated to (1) negative control group: oral hygiene instruction (OHI) alone; (2) test group 1: OHI plus EO mouthrinse; and (3) test group 2: OHI plus FM mouthrinse. Clinical examinations included plaque index (PI), bleeding index (BI) and modified gingival index (MGI). Salivary microbial quantifications included total aerobic and anaerobic bacteria, Streptococci and Lactobacilli counts. Clinical and microbiological examinations were conducted at baseline, 3rd and 6th months (T1, T2, and T3). BI was significantly reduced in both the FM mouthrinse and EO mouthrinse groups compared with the negative control group at T3 (P 0.05). Both NCCMs effectively reduced gingival bleeding without causing significant alterations of microbial profile in young orthodontic patients. © 2012 John Wiley & Sons Ltd, BSPD and IAPD.

New therapeutic modalities to modulate orthodontic tooth movement

Directory of Open Access Journals (Sweden)

Ildeu Andrade Jr

2014-12-01

Full Text Available Modulation of orthodontic tooth movement (OTM is desirable not only to patients because it shortens treatment time, but also to orthodontists, since treatment duration is associated with increased risk of gingival inflammation, decalcification, dental caries, and root resorption. The increased focus on the biological basis of tooth movement has rendered Orthodontics a more comprehensive specialty that incorporates facets of all fields of medicine. Current knowledge raises the possibility of using new therapeutic modalities for modulation of OTM, such as corticotomy, laser therapy, vibration (low-intensity pulsed ultrasound, local injections of biomodulators and gene therapy; with the latter being applicable in the near future. They are intended to enhance or inhibit recruitment, differentiation and/or activation of bone cells, accelerate or reduce OTM, increase stability of orthodontic results, as well as assist with the prevention of root resorption. This article summarizes recent studies on each one of these therapeutic modalities, provides readers with information about how they affect OTM and points out future clinical perspectives.

Full 3-dimensional digital workflow for multicomponent dental appliances: A proof of concept.

Science.gov (United States)

van der Meer, W Joerd; Vissink, Arjan; Ren, Yijin

2016-04-01

The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. The authors scanned a volunteer's dentition with an intraoral scanner (Lava Chairside Oral Scanner C.O.S., 3M). A digital impression was used to design 2 multicomponent orthodontic appliances. Biocompatible acrylic baseplates were produced with the aid of a 3D printer. The metal springs and clasps were produced by a bending robot. The fit of the 2 appliances was assessed by 2 experienced orthodontists. The authors assessed both orthodontic appliances with the volunteer's dentition and found the fit to be excellent. Clinicians can fully produce a multicomponent dental appliance consisting of both an acrylic baseplate and other parts, such as clasps, springs, or screws, using a digital workflow process without the need for a physical model of the patient's dentition. Plaster models can be superfluous for orthodontic treatment as digital models can be used in all phases of a full digital workflow in orthodontics. The arduous task of making a multicomponent dental appliance that involves bending wires can possibly be replaced by a computer, design software, a 3D printer, and a bending robot. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Osteoblastic differentiating potential of dental pulp stem cells in vitro cultured on a chemically modified microrough titanium surface.

Science.gov (United States)

DE Colli, Marianna; Radunovic, Milena; Zizzari, Vincenzo L; DI Giacomo, Viviana; DI Nisio, Chiara; Piattelli, Adriano; Calvo Guirado, José L; Zavan, Barbara; Cataldi, Amelia; Zara, Susi

2018-03-30

Titanium surface modification is critical for dental implant success. Our aim was to determine surfaces influence on dental pulp stem cells (DPSCs) viability and differentiation. Implants were divided into sandblasted/acid-etched (control) and sandblasted/acid-etched coated with calcium and magnesium ions (CaMg), supplied as composite (test). Proliferation was evaluated by MTT, differentiation checking osteoblastic gene expression, PGE2 secretion and matrix formation, inflammation by Interleukin 6 (IL-6) detection. MTT and IL-6 do not modify on test. A PGE2 increase on test is recorded. BMP2 is higher on test at early experimental points, Osterix and RUNX2 augment later. Alizarin-red S reveals higher matrix production on test. These results suggest that test surface is more osteoinductive, representing a start point for in vivo studies aiming at the construction of more biocompatible dental implants, whose integration and clinical performance are improved and some undesired effects, such as implant stability loss and further surgical procedures, are reduced.

Digital models: How can dental arch form be verified chairside?

Directory of Open Access Journals (Sweden)

Alana Tavares

Full Text Available ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05. Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001, the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires.

Digital models: How can dental arch form be verified chairside?

Science.gov (United States)

Tavares, Alana; Braga, Emanuel; de Araújo, Telma Martins

2017-01-01

ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05). Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001), the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires. PMID:29364382

Peripheral Mechanisms of Dental Pain: The Role of Substance P

Directory of Open Access Journals (Sweden)

Paola Sacerdote

2012-01-01

Full Text Available Current evidence supports the central role of neuropeptides in the molecular mechanisms underlying dental pain. In particular, substance P, a neuropeptide produced in neuron cell bodies localised in dorsal root and trigeminal ganglia, contributes to the transmission and maintenance of noxious stimuli and inflammatory processes. The major role of substance P in the onset of dental pain and inflammation is increasingly being recognised. Well-grounded experimental and clinical observations have documented an increase in substance P concentration in patients affected by caries, pulpitis, or granulomas and in those undergoing standard orthodontic or orthodontic/dental care procedures. This paper focuses on the role of substance P in the induction and maintenance of inflammation and dental pain, in order to define future lines of research for the evaluation of therapeutic strategies aimed at modulating the complex effects of this mediator in oral tissues.

[Markers of dental children`s health in the application of therapeutic orthodontic equipment].

Science.gov (United States)

Пачевська, Аліса В; Білошицька, Аліна В

Treatment of teeth anomalies using removable and non-removable orthodontic devices in children leads to complications such as caries, gingivitis, periodontitis, oral mucosa hyperplasia. Etiopathogenetical of these diseases can be associated with biochemical changes in the composition of saliva. To determine the activity of lysozyme and amylase in oral fluid in children when using a fixed and removable orthodontic devices. Amylase and lysozyme were studied in oral fluid. Analyzed the biochemical composition of the freshly samples of oral fluid that was obtained in the control, experimental group 1 and 2 (children ages 7-18 years, which were used medical non-removable and removable orthodontic devices). Saliva was collected at the beginning of the therapeutic use of orthodontic devices (the first day of treatment), on 3 and 6 months of treatment. Assessment of lysozyme activity was carried nephelometric method on the ability of lysozyme to dissolve indicator organism Micrococcus lysodeicticus. To construct a calibration graph using dry lysozyme company Sigma. Salivary amylase activity was determined by hydrolysis of starch. The results were subjected to statistical analysis by standard methods. Data processed using software packages applied statistical analysis Statistica 6.0, Microsoft Excel, 2003. The use of a fixed and removable orthodontic equipment led to a decrease in saliva amylase, major changes are observed on the 6th month of treatment. The activity of lysozyme in saliva decreased the mostin patients with a permanent equipment. Major changes were also recorded on the 6th month of treatment. Complications of orthodontic treatment teeth anomalies in children (caries, gingivitis, periodontitis) caused by changes in the biochemical composition of saliva. For the prevention of the emergence and development of these complications is necessary to control the level of amylase and lysozyme in the mouth.

Assessment of skeletal maturation with permanent mandibular second molar calcification stages among a group of Nepalese orthodontic patients

Directory of Open Access Journals (Sweden)

Giri J

2016-03-01

Full Text Available Jamal Giri,1 Basanta Kumar Shrestha,2 Rajiv Yadav,2 Tika Ram Ghimire21Department of Orthodontics, BP Koirala Institute of Health Sciences, Dharan, 2Department of Dentistry, Institute of Medicine, Kathmandu, Nepal Background: Assessment of growth status of a patient is a key component in orthodontic diagnosis and treatment planning for growing patients with skeletal discrepancy. Skeletal maturation based on hand-wrist radiograph and cervical vertebral maturation (CVM are commonly used methods of growth assessment. Studies have shown that stages of dental calcification can also be used to assess skeletal maturation status of an individual, whereas other studies have suggested that the relationship between dental calcification and skeletal maturation should be interpreted with caution owing to racial variation. Objective: To evaluate the relationship between permanent mandibular second molar calcification stages and skeletal maturity assessed by CVM among a group of Nepalese orthodontic patients. Materials and methods: One hundred and sixty-eight digital radiographs (84 orthopantomograms and 84 lateral cephalograms were obtained from the records of 84 patients who sought orthodontic treatment in Orthodontic and Dentofacial Orthopaedic Unit, Department of Dentistry, Institute of Medicine, Kathmandu. Two parameters were used in this study, namely, CVM stages from lateral cephalogram and Demirjian index (DI stages from orthopantomogram. The evaluation of digital radiographs was carried out on a computer screen with a resolution of 1,280×800 pixels. The association between DI stages of permanent mandibular second molar and CVM stages was assessed. Results: A statistically significant association was found between DI and CVM stages for both male and female subjects with Pearson's contingency coefficient value of 0.751 and 0.766 for male and female subjects, respectively. Conclusion: Skeletal maturation can be reliably assessed with dental calcification

Apical root resorption due to orthodontic treatment detected by cone beam computed tomography.

Science.gov (United States)

Castro, Iury O; Alencar, Ana H G; Valladares-Neto, José; Estrela, Carlos

2013-03-01

To determine the frequency of apical root resorption (ARR) due to orthodontic treatment using cone beam computed tomography (CBCT) in a sample of 1256 roots from 30 patients. All patients had Class I malocclusion with crowding. Of the 30 patients evaluated, 11 were boys and 19 were girls; their mean age was 13 years (11 to 16 years). Orthodontic treatment followed the nonextraction treatment. CBCT images were obtained before and after orthodontic treatment, and ARR was determined using Axial Guided Navigation of CBCT images. All patients had ARR. No statistically significant association was found between resorption frequency, gender, and age. ARR was detected using CBCT in 46% of all roots that underwent orthodontic treatment. CBCT was effective for detecting in vivo even minimal degrees of ARR due to orthodontic treatment and allowed three-dimensional evaluation of dental roots and visualization of palatine roots of maxillary molars. The highest frequencies and the most significant ARR occurred in incisors and distal roots of first maxillary and mandibular molars.

Bioactivity and Osseointegration of PEEK Are Inferior to Those of Titanium: A Systematic Review.

Science.gov (United States)

Najeeb, Shariq; Bds, Zohaib Khurshid; Bds, Sana Zohaib; Bds, Muhammad Sohail Zafar

2016-12-01

Polyetheretherketone (PEEK) has been suggested as an alternative to replace titanium as a dental implant material. However, PEEK's bioactivity and osseointegration are debatable. This review has systematically analyzed studies that have compared PEEK (or PEEK-based) implants with titanium implants so that its feasibility as a possible replacement for titanium can be determined. The focused question was: "Are the bioactivity and osseointegration of PEEK implants comparable to or better than titanium implants?" Using the key words "dental implant," "implant," "polyetheretherketone," "PEEK," and "titanium" in various combinations, the following databases were searched electronically: PubMED/MEDLINE, Embase, Google Scholar, ISI Web of Knowledge, and Cochrane Database. 5 in vitro and 4 animal studies were included in the review. In 4 out of 5 in vitro studies, titanium exhibited more cellular proliferation, angiogenesis, osteoblast maturation, and osteogenesis compared to PEEK; one in vitro study observed comparable outcomes regardless of the implant material. In all animal studies, uncoated and coated titanium exhibited a more osteogenic behavior than did uncoated PEEK, while comparable bone-implant contact was observed in HA-coated PEEK and coated titanium implants. Unmodified PEEK is less osseoconductive and bioactive than titanium. Furthermore, the majority of studies had multiple sources of bias; hence, in its unmodified form, PEEK is unsuitable to be used as dental implant. Significantly more research and long-term trials must focus on improving the bioactivity of PEEK before it can be used as dental implant. More comparative animal and clinical studies are warranted to ascertain the potential of PEEK as a viable alternative to titanium.

Some comments on clinical studies in orthodontics and their applications to orthodontic treatment.

Science.gov (United States)

Baumrind, S

1999-06-01

This article indicates the origins and background of the current series of National Institute of Dental and Craniofacial Research-funded, university-based clinical studies of orthodontic treatment. It suggests that future studies should be less focused on refining our estimates of mean changes during treatment and concentrate research on the systematic analysis of individual differences among patients' responses to treatment, and study how skilled clinicians make in-course corrections in response to unexpected changes in treatment conditions. Finally, some suggestions are made concerning optimization of decision making in the presence of uncertainty.

[Orthodontic treatment need in school-age children in the Leningrad region].

Science.gov (United States)

Bagnenko, N M; Bagnenko, A S; Grebnev, G A; Madai, D Y

2016-01-01

Epidemiology of dentoalveolar anomalies is undoubtedly important, but in terms of the organization of orthodontic care, greater interest are data on the needs in this type of treatment. In a situation of limited manpower and resources for the provision of orthodontic care information about needs in orthodontic treatment allows you to define a group of patients with the primary need for orthodontic treatment, and to identify priorities to optimize the organization of orthodontic care in the region. Such data can be obtained by using the Dental Aesthetics Index (DAI) and Index of Orthodontic Treatment Need (IOTN). The aim of the study was to analyze the epidemiology of various forms of dentoalveolar anomalies school-age children of Kirishi district of Leningrad region, as well as their needs in orthodontic treatment in accordance with objective evaluation indices. The study involved 734 pupils of Kirishi lyceum №1 of Leningrad region. Analysis of the prevalence of dentoalveolar anomalies, as well as needs in the orthodontic treatment was conducted in three age groups: I mixed dentition period (6-9 years), II mixed dentition period (10-13 years), and permanent dentition (14-17). To determine the needs in the orthodontic treatment were used two most common international index (DAI and IOTN). In Kirishi district of Leningrad region dentoalveolar anomalies were found in 88.8% of children of school age, which is in accordance with the indices and IOTN DAI needs in orthodontic treatment is 38.8% and 54.5%, respectively. In order to reduce unnecessarily high load volume medical institutions orthodontic profile, optimize utilization of financial resources, as well as reducing social tension it is recommended to introduce the practice of doctors-orthodontists methodology for determining the needs in orthodontic treatment by objective indices.

Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

Science.gov (United States)

Dianiskova, Simona; Calzolari, Chiara; Migliorati, Marco; Silvestrini-Biavati, Armando; Isola, Gaetano; Savoldi, Fabio; Dalessandri, Domenico; Paganelli, Corrado

2016-01-01

The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of “a substantial risk for irreparable damage” from a new trend called “do-it-yourself” orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment. PMID:27672645

Tantalum, Niobium and Titanium Coatings for Biocompatibility Improvement of Dental Implants

Directory of Open Access Journals (Sweden)

Vajihesadat Mortazavi

2007-01-01

Full Text Available Introduction: Metals have a wide range of applications in implant and prosthetic materials in dentistry.Corrosion resistance and biocompatibility of metals should be improved in order to utilizethem as biomaterials. The aim of this work was to prepare metallic coatings on 316L stainless steel dental implants, to evaluate the corrosion characteristics of the uncoated and metallic coated dentalimplants as an indication of biocompatibility and, to compare the effect of the type of the coatings on biocompatibility.Materials and Methods: In this in vitro evaluation, three types of metallic coatings including tantalum, niobium and titanium coatings were compared using a physical vapor deposition process on 316L stainless steel dental implants. Structural characterization techniques including X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis were utilized to investigatethe microstructure and morphology of the coatings. Electrochemical potentiodynamic tests were performed in two types of physiological solutions at 37±1°C in order to determine and compare the corrosioncurrent density and corrosion potential characteristics. The mean values were statistically compared by ANOVA at a 95% level of confidence.Results: the findings showed that all of the three types of metallic coatings had a positive effect on improvement of the corrosion behavior. The coatings could increase the corrosion resistance of 316L stainless steel and this trend was independent of the type of physiological environment.Conclusion: The biocompatible metallic coatings could decrease the corrosion current density and is a distinct advantage for prevention of ion release. Decreasing ion release can improve the biocompatibility of the dental implant, and consequently can prevent tissue damage, tissue inflammation and irritation, and can also lead to obtaining a desirable histopathological response.

Adhesives for fixed orthodontic bands.

Science.gov (United States)

Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

2016-10-25

Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

Orthodontic treatment of the transposition of a maxillary canine and a first premolar: a case report.

Science.gov (United States)

Teresa, Dinoi Maria; Stefano, Mummolo; Annalisa, Monaco; Enrico, Marchetti; Vincenzo, Campanella; Giuseppe, Marzo

2015-03-01

Transposition is an anomaly of tooth position, the most frequent of which involves the canine and the first maxillary premolar. We describe the orthodontic treatment of a unilateral transposition of an upper canine and an upper right first premolar in the permanent dentition. A 12-year-old Caucasian boy presented with transposition of his upper right canine and upper right first premolar. He had combined surgical-orthodontic treatment to correct the transposition and to obtain a Class I relationship between the molar and canine. This treatment resolved the dental crowding and achieved good functional and aesthetic results. In transposition, the choice of the most suitable treatment depends on the occlusion, level of dental crowding, aesthetics, position of the radicular apices, and the specific needs of the patient. In this case, orthodontic alignment of the transposed teeth into their physiological position achieved all of our objectives and our patient was satisfied with the aesthetic results obtained.

Corrosion of Nickel-Titanium Orthodontic Archwires in Saliva and Oral Probiotic Supplements

Directory of Open Access Journals (Sweden)

Gianluca Turco

2017-01-01

Full Text Available Objectives: The aim of the study was to examine how probiotic supplements affect the corrosion stability of orthodontic archwires made of nickel-titanium alloy (NiTi. Materials and Methods: Ni-Ti archwires (0.508x0.508 and having the length of 2.5 cm were tested. The archwires (composition Ni=50.4%, Ti=49.6% were uncoated, nitrified and rhodium coated. Surface microgeometry was observed by using scanning electron microscope and surface roughness was measured by profilometer through these variables: roughness average, maximum height and maximum roughness depth. Corrosion was examined by electrochemical method of cyclic polarisation. Results: Rhodium coated alloy in saliva has significantly higher general corrosion in saliva than nitrified alloy and uncoated alloy, with large effect size (p=0.027; η2=0.700. In the presence of probiotics, the result was even more pronounced (p<0.001; η2=0.936. Probiotic supplement increases general and localised corrosion of rhodium coated archwire and slightly decreases general corrosion and increases localised corrosion in uncoated archwire , while in the case of nitrified archwire the probability of corrosion is very low. The differences in surface roughness between NiTi wires before corrosion are not significant. Exposure to saliva decreases roughness average in rhodium coated wire (p=0.015; η2=0.501. Media do not significantly influence surface microgeometry in nitrified and uncoated wires. Conclusion: Probiotic supplement affects corrosion depending on the type of coating of the NiTi archwire. It increases general corrosion of rhodium coated wire and causes localised corrosion of uncoated and rhodium coated archwire. Probiotic supplement does not have greater influence on surface roughness compared to that of saliva.

Myofunctional orthodontic for growth child

Directory of Open Access Journals (Sweden)

Harun Achmad

2016-06-01

Full Text Available Normal growth and development is a concern for every parent! If your child’s teeth are not straight, facial growth and development could also be affected. Current orthodontic treatment can damage teeth, restrict jaw growth and usually is not a stable result. Most importantly, braces and extractions do not address the real causes of crooked teeth and quite often once they are removed, the teeth crowd up again. Studies have shown that teeth will have a tendency to change their positions after treatment hence the potential need for lifetime retainers with traditional orthodontics. Our orthodontic treatment uses myofunctional techniques to address the poor oral habits (known as myofunctional habits that are the real, underlying causes of crooked teeth and uses light, intermittent forces to align the teeth. Myofunctional orthodontic techniques have been practiced by Orthodontists and Dentists around the world for over 25 years. This is done through the use of a series of removable dental appliances that are worn for just 1-2 hours each day and overnight while sleeping. In traditional adult orthodontic treatment, certain factors can contribute to less stable results and likely long term or permanent retainers being required if poor oral habits have not been corrected. Orofacial Myofunctional therapy is a profound process used to address the improper function of the tongue and facial muscles used at rest. Treatment may help address the symptoms of a a wide variety of health issues, ranging from opening airways, to treating headaches, Temporomandibular Joint Disorders (TMD, and poor digestion just to name a few. Myofunctional therapy is the “neuromuscular re-education or re-patterning of the oral and facial muscles”. The therapy includes facial and tongue exercises and techniques that modify the poor habits that affect proper tongue position, improved breathing, chewing, and swallowing.

Orthodontic treatment of a patient with cleidocranial dysplasia: A case report.

Science.gov (United States)

Li, Zi-Jian; Wang, Jun-Yan; Gao, Ming-Fei; Wu, Da-Lei; Chang, Xin

2016-08-01

Cleidocranial dysplasia (CCD) is a rare autosomal dominant condition that affects ossification. The dental abnormalities associated with CCD present an obstacle to orthodontic treatment planning. Early diagnosis is crucial to provide the patient with different treatment modalities that will suit the particular patient. In the present case, combined surgical and orthodontic treatment were performed to guide multiple impacted teeth. A single nucleotide missense variation was identified in exon 3 of runt-related transcription factor 2 ( RUNX2 ) in this patient. The current results suggest a correlation between dental alterations and mutations in the runt domain of RUNX2 in CCD patients. Further clinical and genetic studies may required to confirm the association between phenotypes and genotypes in CCD and to identify other factors that may influence the clinical features of this disease. Patients with cleidocranial dysplasia require a team approach which demands good communication and cooperation from the patient. Timing of the intervention is critical, and numerous surgeries may be required. The patient in the present case report was treated by a team of practitioners, which involved several dental specialties to achieve an optimal result.

Combined Orthodontic and Surgical Approach in the Correction of a Class III Skeletal Malocclusion with Mandibular Prognathism and Vertical Maxillary Excess Using Bimaxillary Osteotomy

OpenAIRE

George Jose Cherackal; Eapen Thomas; Akhilesh Prathap

2013-01-01

For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment. Surgery is not a substitute for orthodontics in these patients. Instead, it must be properly coordinated with orthodontics and other dental treatments to achieve good overall results. Dramatic progress in recent years has made it possible for combined surgical orthodontic treatm...

The effect of mechanical vibration on orthodontically induced root resorption.

Science.gov (United States)

Yadav, Sumit; Dobie, Thomas; Assefnia, Amir; Kalajzic, Zana; Nanda, Ravindra

2016-09-01

To investigate the effect of low-frequency mechanical vibration (LFMV) on orthodontically induced root resorption. Forty male CD1, 12-week-old mice were used for the study. The mice were randomly divided into five groups: group 1 (baseline)-no spring and no mechanical vibration, group 2-orthodontic spring but no vibration, group 3-orthodontic spring and 5 Hz of vibration applied to the maxillary first molar, group 4-orthodontic spring and 10 Hz of vibration applied to maxillary first molar, and group 5-orthodontic spring and 20 Hz of vibration applied to maxillary first molar. In the different experimental groups, the first molar was moved mesially for 2 weeks using a nickel-titanium coil spring delivering 10 g of force. LFMVs were applied at 5 Hz, 10 Hz, and 20 Hz. Microfocus X-ray computed tomography imaging was used to analyze root resorption. Additionally, to understand the mechanism, we applied LFMV to MC3T3 cells, and gene expression analyses were done for receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG). Orthodontic tooth movement leads to decreased root volume (increased root resorption craters). Our in vivo experiments showed a trend toward increase in root volume with different frequencies of mechanical vibration. In vitro gene expression analyses showed that with 20 Hz of mechanical vibration, there was a significant decrease in RANKL and a significant increase in OPG expression. There was a trend toward decreased root resorption with different LFMVs (5 Hz, 10 Hz, and 20 Hz); however, it was not more statistically significant than the orthodontic-spring-only group.

Introducing Scenario Based Learning interactive to postgraduates in UQ Orthodontic Program.

Science.gov (United States)

Naser-ud-Din, S

2015-08-01

E-learning has gained momentum in health sciences and seems to have great potential in specialist dental education. Higher acceptability by learners is particularly associated with the surge of smart devices. Currently, there are limited number of e-learning modules available for dental education, particularly in Orthodontics. Scenario Based Learning interactive (SBLi(®)) software was used for the first time in Orthodontics Postgraduate training at the University of Queensland. Nine interactive modules were created embedded with clinical procedure videos, web-links, evidence-based literature, along with opportunity for self-assessment and evaluation. Qualitative data were collected before and after the administration of the SBLi(®) for Orthodontics. The purpose of this data was to investigate learning styles and the acceptance of e-modules as part of postgraduate training. Advantages of the package included high acceptance rate, greater confidence in the application of clinical skills covered in the modules and reduced contact time particularly with limited academic staff. E-modules demonstrated high compatibility with the learning styles of the participants and were considered engaging. It seems apparent that e-learning is most effective in a blended learning environment, supplemented with the traditional classroom approach, rather than as a sole mechanism for postgraduate training. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Awareness of orthodontists regarding oral hygiene performance during active orthodontic treatment.

Science.gov (United States)

Berlin-Broner, Y; Levin, L; Ashkenazi, M

2012-09-01

The aim of the present study was orthodontist's awareness for maintenance of several home and professional prevention measures during active orthodontic treatment according to patients' report. A structured questionnaire was distributed to 122 patients undergoing active orthodontic treatment with fixed appliances. Patients were treated by 38 different orthodontists. The questionnaire accessed information regarding instructions patients received from their orthodontist concerning maintenance of their oral hygiene during orthodontic treatment. Most of the patients (94%) reported that their orthodontists informed them at least once about the importance of tooth-brushing, and 74.5% received instructions for correct performance of tooth brushing or alternatively were referred to dental hygienist. However, only 24.5% of the patients reported that their orthodontist instructed them to use the correct fluoride concentration in their toothpaste, to use daily fluoride mouthwash (31.5%) and to brush their teeth once a week with high concentration of fluoride gel (Elmex gel; 10.2%). Only 13.8% received application of high concentration of fluoride gel or varnish at the dental office, and 52% of the patients reported that their orthodontist verified that they attend regular check-ups by their dentist. A significant positive correlation was found between explaining the patients the importance of tooth brushing and the following variables: instructing them on how to brush their teeth correctly (p<0.0001), explaining them which type of toothbrush is recommended for orthodontic patients (p=0.002), recommending to perform daily fluoride oral rinse (p=0.036) and referring them to periodic check-ups (p=0.024). Orthodontists should increase their awareness and commitment for instructing their patient on how to maintain good oral hygiene in order to prevent caries and periodontal disease during orthodontic treatment.

Orthodontic treatment for oral rehabilitation after multiple maxillofacial bone fractures.

Science.gov (United States)

Nakamura, Yoshiki; Ogino, Tomoko Kuroiwa; Hirashita, Ayao

2008-09-01

We present the orthodontic treatment of a patient with occlusal dysfunction after plastic surgery for multiple maxillofacial bone fractures caused by a traffic accident. The patient had mandibular deviation to the right because of inappropriate repositioning and fixation of the fractured bone and complete avulsion of both mandibular central incisors. The bilateral mandibular incisors, canines, and premolars were also suspected of partial avulsion or alveolar bone fracture. Several tests, including percussion and dental computed tomography, were performed on these teeth to rule out ankylosis and confirm tooth movement. Camouflage orthodontic treatment was carried out with expansion of the maxillary arch, alignment of both arches, and space closure between the mandibular lateral incisors to improve the occlusion. Good occlusion and interdigitation were obtained. Orthodontic treatment is useful for the rehabilitation of occlusal dysfunction caused by multiple maxillofacial bone fractures.

Role of Orthodontics in Forensic Odontology- A Social Responsibility.

Science.gov (United States)

Reddy, Giridhar; Reddy, Vinay P; Sharma, Meenakshi; Aggarwal, Monika

2016-04-01

Orthodontics like any other specialty has much to offer law enforcement in the detection and solution of crime or in civil proceedings. Forensic odontology often requires an interdisciplinary approach towards dentistry for the purpose of proper diagnosis of cases. In cases where the forensic odontologist has to establish a person's identity, an orthodontist can be of great help at times. Teeth, with their anatomic/physiologic variations and therapy such as orthodontic treatment, restorations and prosthesis may record information that remains throughout life and beyond. The teeth may also be used as weapons for defense or offense and as such may leave information about the identity of the biter at the time of crime. Forensic odontology also plays an important role in the recognition of crime and abuse among people of all ages. Orthodontists like all other dental professionals can play a major role by maintaining proper dental records and thus providing important or vital information or clues to the legal authorities in order to help them in their search.

Minimally invasive corticotomy in orthodontics using a three-dimensional printed CAD/CAM surgical guide.

Science.gov (United States)

Cassetta, M; Giansanti, M; Di Mambro, A; Calasso, S; Barbato, E

2016-09-01

The aim of this prospective study was to evaluate the effectiveness of an innovative, minimally invasive, flapless corticotomy procedure in orthodontics. The STROBE guidelines were followed. Ten patients with severe dental crowding and a class I molar relationship were selected to receive orthodontic treatment with clear aligners and corticotomy-facilitated orthodontics. The mean age of these patients was 21 years (range 17-28, standard deviation 6.08 years); the male to female ratio was 2:1. The main outcome was a reduction in the total treatment time to correct dental crowding. The secondary outcomes were periodontal index changes, the degree of root resorption, and patient perceptions of the method used, assessed using the short-form Oral Health Impact Profile (OHIP-14). The occurrence of early surgical complications or unexpected events was also recorded. All patients completed the treatment to correct dental crowding. The average treatment time was reduced by two-thirds. The procedure did not significantly modify the periodontal indices or oral health-related quality of life. No early surgical complications or unexpected events were observed. In short, the results indicate that this new procedure is safe and accelerates tooth movement without periodontal complications or discomfort. However, the efficacy of this procedure must be confirmed in controlled clinical trials. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Repercussion of noni mouthwash on surface characterization of Nickel-Titanium archwire

Directory of Open Access Journals (Sweden)

Dhivya Dilipkumar

2017-01-01

Full Text Available Objective: Maintaining oral hygiene is very important during orthodontic therapy mouthwashes are prescribed as an adjunct to improve patient's oral hygiene. Commercially available mouthwashes e.g. Chlorhexidine, Listerine, fluoride containing mouthwashes have shown to alter the surface characteristics of orthodontic wires. Hence the purpose of the study was to evaluate the effect of Noni mouthwash on surface quality and compositional changes of Nickel Titanium orthodontic wires. Materials and Methods: In this in vitro study pre-formed 0.014 inch NiTi arch wire was used. The study comprised of two samples, one control and one test sample which were 25mm in length. Control sample was stored at room temperature without any manipulation while test sample was immersed in Noni mouthwash solution for 1.5 hours, after which the test specimen was removed from the mouthwash solution and rinsed with distilled water. Both control and test samples were sent for scanning electron microscopy analysis, to qualitatively characterize the topography of the wire surface. Electron dispersion spectrum analysis was done to evaluate the various components of both the wires. Results: No significant difference in the average surface roughness for both wire samples was observed. There was no significant difference seen in the composition of wire after immersion in Noni mouthwash. Conclusion: Noni mouthwash did not have significant influence on the surface roughness or altered the composition of the Ni-Ti wire. Hence Noni mouthwash may be prescribed as a natural, non-destructive prophylactic agent for orthodontic patients.

Cytotoxic, allergic and genotoxic activity of a nickel-titanium alloy

NARCIS (Netherlands)

Veldhuizen, AG; Sanders, MM; Schakenraad, JM; vanHorn, [No Value

The nearly equiatomic nickel-titanium (NiTi) alloy is known for its shape memory properties. These properties can be put to excellent use in various biomedical applications, such as wires for orthodontic tooth alignment and osteosynthesis staples. The aim of this study was to evaluate the short-term

Comprehensive dental management in a Hallermann–Streiff ...

African Journals Online (AJOL)

2014-09-24

Sep 24, 2014 ... During the follow‑up period, rapidly progressive root resorption was ... progressive root resorption was detected in the primary maxillary anterior ... dental literature shows that orthodontic/orthognathic, surgical, prosthetic ...

Effectiveness of nickel-titanium springs vs elastomeric chains in orthodontic space closure: A systematic review and meta-analysis.

Science.gov (United States)

Mohammed, H; Rizk, M Z; Wafaie, K; Almuzian, M

2018-02-01

The aim of this study is to explore the effectiveness of nickel titanium closing springs (NiTi-CS) and elastomeric power chains (EPC) in orthodontic space closure and to assess the adverse periodontal effects, cost efficiency and patient-centred outcomes between both of these methods. An electronic search of online databases (Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, Scopus, LILACS and Web of Science), reference lists and grey literature as well as hand search were conducted without language restriction up to November/2017. Two authors blindly and in duplicate were involved in study selection, quality assessment and the extraction of data. Only randomized clinical trials (RCTs) were included. The quality of the studies was assessed using the Cochrane Collaboration's risk of bias tool. 95% confidence intervals and mean difference for continuous data were calculated. A meta-analysis that generated a random-effect model for the comparable outcomes was conducted, and heterogeneity was measured using I 2 statistic. Of 187 records, 4 RCTs met the criteria and were included in the quantitative synthesis featuring 290 test quadrants. Faster space closure with NiTi-CS was observed with a mean difference of (0.20 mm/month, 95% CI: 0.12 to 0.28). Loss of anchorage appears to be similar within both groups when synthesized qualitatively. With exception to anchorage loss, secondary outcomes could not be investigated in the included trials. There is a moderate quality of evidence suggesting a faster orthodontic space closure with the NiTi-CS when compared to EPC. A comparable amount of anchorage loss was observed regardless of the utilized method of space closure. Further high-quality RCTs with parallel-groups, reporting on the adverse effects and patient-centred values, are recommended. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Rough surfaces of titanium and titanium alloys for implants and prostheses

International Nuclear Information System (INIS)

Conforto, E.; Aronsson, B.-O.; Salito, A.; Crestou, C.; Caillard, D.

2004-01-01

Titanium and titanium alloys for dental implants and hip prostheses were surface-treated and/or covered by metallic or ceramic rough layers after being submitted to sand blasting. The goal of these treatments is to improve the surface roughness and consequently the osteointegration, the fixation, and the stability of the implant. The microstructure of titanium and titanium alloys submitted to these treatments has been studied and correlated to their mechanical behavior. As-treated/covered and mechanically tested surfaces were characterized by scanning electron microscopy (SEM). Structural analyses performed by transmission electron microscopy (TEM), mainly in cross-section, reveal the degree of adherence and cohesion between the surface layer and the substrate (implant). We observed that, although the same convenient surface roughness was obtained with the two types of process, many characteristics as structural properties and mechanical behavior are very different

Removable orthodontic appliance with nickel-titanium spring to reposition the upper incisors in an autistic patient.

Science.gov (United States)

Saito, Kan; Jang, Insan; Kubota, Kazumi; Hoshino, Tomonori; Hotokezaka, Hitoshi; Yoshida, Noriaki; Fujiwara, Taku

2013-01-01

A newly designed removable appliance with a shape-memory wire was used for the orthodontic treatment of the anterior teeth in an 11-year-old child who had autism and intellectual disability. The device was designed to reduce the lateral incisor crossbite and the central incisors' labial rotation. The child was treated for 1 year with this removable appliance. Tooth movement was analyzed using cephalograms and surface data were derived from study models. This device proved to be very durable. The lateral incisor crossbite was corrected, and the inclination of the upper central incisors and the interincisal angle were improved. This appliance exerts light and continuous orthodontic force, without requiring any adjustments of the spring wire. The appliance also facilitated orthodontic treatment in a child with intellectual disability in whom treatment with a standard orthodontic device would be unsuitable. ©2012 Special Care Dentistry Association and Wiley Periodicals, Inc.

Adhesives for orthodontic bracket bonding

Directory of Open Access Journals (Sweden)

Déborah Daniella Diniz Fonseca

2010-04-01

Full Text Available The advent of acid etching, introduced by Buonocore in 1955, brought the possibility of bonding between the bracket base and enamel, contributing to more esthetic and conservative orthodontics. This direct bracket bonding technique has brought benefits such as reduced cost and time in performing the treatment, as well as making it easier to perform oral hygiene. The aim of this study was to conduct a survey of published studies on orthodontic bracket bonding to dental enamel. It was verified that resin composites and glass ionomer are the most studied and researched materials for this purpose. Resin-modified glass ionomer, with its biocompatibility, capacity of releasing fluoride and no need for acid etching on the tooth structure, has become increasingly popular among dentists. However, due to the esthetic and mechanical properties of light polymerizable resin composite, it continues to be one of the adhesives of choice in the bracket bonding technique and its use is widely disseminated.

The increased number of osteoblasts and capillaries in orthodontic tooth movement post-administration of Robusta coffee extract

Directory of Open Access Journals (Sweden)

H. Herniyati

2017-06-01

Full Text Available Background: The application of orthodontic forces subjects blood capillaries to considerable pressure, resulting in hypoxia on the pressure side. Vascular endothelial growth factor (VEGF, expressed in osteoblasts represents an important mitogen that induces angiogenesis. Osteoblasts and blood capillaries play an important role in bone formation. Robusta coffee contains chlorogenic acid and caffeic acid both of which produce antioxidant effects capable of reducing oxidative stress in osteoblasts. Purpose: The aim of this study was to analyze the effects of Robusta coffee extract on the number of osteoblasts and blood capillaries in orthodontic tooth movement. Methods: This research constituted a laboratory-based experimental study involving the use of sixteen male rodents divided into two groups, namely; control group (C consisting of eight mice given orthodontic mechanical force (OMF and a treatment group (T containing eight mice administered OMF and dried Robusta coffee extract at a dose of 20mg/ 100 g BW. The OMF was performed by installing a ligature wire on the maxillary right first molar and both maxillary incisors. In the following stage, the maxillary right first molar was moved to the mesial using Tension Gauze with a Nickel Titanium Orthodontic closed coil spring. Observation was subsequently undertaken on the 15th day by extracting the maxillary right first and second molar with their periodontal tissues. Thereafter, histological examination was performed using hematoxylin-eosin (HE staining technique to measure the number of osteoblasts and blood capillaries on the mesial and distal periodontal ligaments of the maxillary right first molar. Results: The administration of Robusta coffee extract increases the number of blood capillaries and osteoblasts on both the pressure and tension sides were found to be significantly higher in the T group compared to the C group (p<0,05. Conclusion: Robusta coffee extract increase the number of

Recent research and development in titanium alloys for biomedical applications and healthcare goods

Directory of Open Access Journals (Sweden)

Mitsuo Niinomi

2003-01-01

Full Text Available Nb, Ta and Zr are the favorable non-toxic alloying elements for titanium alloys for biomedical applications. Low rigidity titanium alloys composed of non-toxic elements are getting much attention. The advantage of low rigidity titanium alloy for the healing of bone fracture and the remodeling of bone is successfully proved by fracture model made in tibia of rabbit. Ni-free super elastic and shape memory titanium alloys for biomedical applications are energetically developed. Titanium alloys for not only implants, but also dental products like crowns, dentures, etc. are also getting much attention in dentistry. Development of investment materials suitable for titanium alloys with high melting point is desired in dental precision castings. Bioactive surface modifications of titanium alloys for biomedical applications are very important for achieving further developed biocompatibility. Low cost titanium alloys for healthcare goods, like general wheel chairs, etc. has been recently proposed.

Prospective Evaluation of Psychosocial Impact after One Year of Orthodontic Treatment Using PIDAQ Adapted for Indian Population.

Science.gov (United States)

Garg, Kanika; Tripathi, Tulika; Rai, Priyank; Sharma, Nandini; Kanase, Anup

2017-08-01

The impact of dental appearance, malocclusion and treatment for the same on psychological and functional well-being has drawn increasing attention over the past decade. Various psychometric instruments alongside normative indices have been used to predict orthodontic concerns. Evaluating the patients' experience during the orthodontic treatment can help us understand the true benefits and advantages of orthodontic therapy. The aim of the present study was to evaluate the change in the psychosocial impact of malocclusion using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) adapted for the Indian population after one year of fixed orthodontic treatment. This interventional study was conducted on 93 patients requiring fixed orthodontic treatment. Brazilian, Chinese, Spanish, Nepali and Moroccan versions of the PIDAQ have been published but the questionnaire is not available in Hindi. In the present study, the original PIDAQ was translated into Hindi language to adapt it for the Indian population and was validated by back translation and pretest. All the subjects answered the Hindi version of the questionnaire at pretreatment (T1) and at one year of orthodontic treatment (T2). Additionally, the Index of Orthodontic Treatment Need (IOTN) was applied to measure the severity and self-perception of malocclusion. The data were analysed using paired t-test, Wilcoxon signed rank test and Kruskal-Wallis test. Significant reduction was found in the total PIDAQ score and each factor's score (porthodontic treatment. There was a positive association of the psychosocial impact of malocclusion with the IOTN-AC (IOTN-Aesthetic Component). Adolescent females were found to be most concerned with their dentofacial appearance. Results showed significant improvement in the psychosocial impact of malocclusion with a reduction in the self-perceived needs of patients with orthodontic treatment. The psychometric instrument used may be recommended as an Oral Health Related

Treatment outcomes in 3 modes of orthodontic practice.

Science.gov (United States)

Poulton, Donald R; Baumrind, Sheldon; Vlaskalic, Vicki

2002-02-01

This study examined differences in pretreatment severity and treatment outcome among orthodontic patients treated in 3 different practice-management modes. Samples of pretreatment (T1) and end of treatment (T2) study casts were selected from traditional private practices (TPP, 3 offices, 81 cases), a dental corporation (COMP, 2 offices, 53 cases), and a dental management service organization (DMSO, 1 office, 36 cases). Orthodontic specialists had treated all patients. Cases were initially selected on a consecutive start basis. From each practice, the first 30 cases satisfying the study criteria were included in the sample. The T1 and T2 study casts were evaluated with the PAR and HLD indexes. The PAR and HLD indexes showed a high level of agreement on T1 cast scores but not on the T2 casts. Mean T1 scores were highest in the COMP cases, followed by the DMSO and the TPP cases. T2 scores were lowest in the TPP cases, followed by the DMSO and the COMP cases. The percentage of PAR score reduction showed that, in all 3 modes, patients were treated to a high standard.

Orthodontic treatment plan changed by 3D images

International Nuclear Information System (INIS)

Yordanova, G.; Stanimirov, P.

2014-01-01

Clinical application of CBCT is most often enforced in dental phenomenon of impacted teeth, hyperodontia, transposition, ankyloses or root resorption and other pathologies in the maxillofacial area. The goal, we put ourselves, is to show how the information from 3D images changes the protocol of the orthodontic treatment. The material, we presented six our clinical cases and the change in the plan of the treatment, which has used after analyzing the information carried on the three planes of CBCT. These cases are casuistic in the orthodontic practice and require individual approach to each of them during their analysis and decision taken. The discussion made by us is in line with reveal of the impacted teeth, where we need to evaluate their vertical depth and mediodistal ratios with the bond structures. At patients with hyperodontia, the assessment is of outmost importance to decide which of the teeth to be extracted and which one to be arranged into the dental arch. The conclusion we make is that diagnostic information is essential for decisions about treatment plan. The exact graphs will lead to better treatment plan and more predictable results. (authors) Key words: CBCT. IMPACTED CANINES. HYPERODONTIA. TRANSPOSITION

Orthodontic Protocol Using Mini-Implant for Class II Treatment in Patient with Special Needs

Directory of Open Access Journals (Sweden)

Fernando Pedrin Carvalho Ferreira

2016-01-01

Full Text Available Improving facial and dental appearance and social interaction are the main factors for special needs (SN patients to seek orthodontic treatment. The cooperation of SN patients and their parents is crucial for treatment success. Objective. To show through a case report the satisfactory results, both functional and esthetic, in patients with intellectual disability, congenital nystagmus, and severe scoliosis. Materials Used. Pendulum device with mini-implants as anchorage unit. Results. Improvement of facial and dental esthetics, correction of Class II malocclusion, and no root resorption shown in the radiographic follow-up. Conclusion. Knowing the limitations of SN patients, having a trained team, motivating and counting on the cooperation of parents and patients, and employing quick and low-cost orthodontic therapy have been shown to be the essential factors for treatment success.

The effect of ligation on the load deflection characteristics of nickel titanium orthodontic wire.

Science.gov (United States)

Kasuya, Shugo; Nagasaka, Satoshi; Hanyuda, Ai; Ishimura, Sadao; Hirashita, Ayao

2007-12-01

This study examined the effect of ligation on the load-deflection characteristics of nickel-titanium (NiTi) orthodontic wire. A modified three-point bending system was used for bending the NiTi round wire, which was inserted and ligated in the slots of three brackets, one of which was bonded to each of the three bender rods. Three different ligation methods, stainless steel ligature (SSL), slot lid (SL), and elastomeric ligature (EL), were employed, as well as a control with neither bracket nor ligation (NBL). The tests were repeated five times under each condition. Comparisons were made of load-deflection curve, load at maximum deflection of 2,000 microm, and load at a deflection of 1,500 microm during unloading. Analysis of Variance (ANOVA) and Dunnett's test were conducted to determine method difference (alpha = 0.05). The interaction between deflection and ligation was tested, using repeated-measures ANOVA (alpha = 0.05). The load values of the ligation groups were two to three times greater than the NBL group at a deflection of 1,500 microm during unloading: 4.37 N for EL, 3.90 N for SSL, 3.02 N for SL, and 1.49 N for NBL (P wire may make NiTi wire exhibit a significantly heavier load than that traditionally expected. NiTi wire exhibited the majority of its true superelasticity with SL, whereas EL may act as a restraint on its superelasticity.

Prevalence of orthodontic treatment need in permanent dentition of Iranian population: A systematic review and meta-analysis of observational studies.

Science.gov (United States)

Eslamipour, Faezeh; Afshari, Zohreh; Najimi, Arash

2018-01-01

Malocclusion is a common oral health problem and can affect the psychosocial well-being in the long term. Therefore, in the recent decades, demand for orthodontic treatment to correct malocclusion has greatly increased worldwide. This systematic review and meta-analysis was undertaken to assess existing evidence on the prevalence of orthodontic treatment need in Iran. National and international databases were searched for articles on the prevalence of orthodontic treatment need using index of orthodontic treatment need (IOTN) and dental aesthetic index (DAI). The required data were completed by hand-searching. After applying the inclusion and exclusion criteria, the quality of articles was checked by a professional checklist. Data extraction and meta-analysis were performed. A random effects model was employed, and publication bias was checked. From a total of 443 articles that reported orthodontic treatment need in Iran, 24 articles were included in the meta-analysis process. Meta-analysis was performed on components of IOTN and DAI. The pooled prevalence of orthodontic treatment need based on Dental Health Component and Aesthetic Component of IOTN and DAI was 23.8% (19.5%-28.7%), 4.8% (3.3%-7%), and 16.1% (12.3%-20.8%). The results were found to be heterogeneous ( P orthodontic treatment need was not high in the Iranian population. Considering the differing prevalence of orthodontic treatment need based on normative index and self-perceived index, it is essential to improve the people's awareness of malocclusion and its side effects on their oral and general health.

Readability of websites containing information on dental implants.

Science.gov (United States)

Jayaratne, Yasas S N; Anderson, Nina K; Zwahlen, Roger A

2014-12-01

It is recommended that health-related materials for patients be written at sixth grade level or below. Many websites oriented toward patient education about dental implants are available, but the readability of these sites has not been evaluated. To assess readability of patient-oriented online information on dental implants. Websites containing patient-oriented information on dental implants were retrieved using the Google search engine. Individual and mean readability/grade levels were calculated using standardized formulas. Readability of each website was classified as easy (≤ 6th-grade level) or difficult (≥ 10th grade level). Thirty nine websites with patient-oriented information on dental implant were found. The average readability grade level of these websites was 11.65 ± 1.36. No website scored at/below the recommended 6th grade level. Thirty four of 39 websites (87.18%) were difficult to read. The number of characters, words, and sentences on these sites varied widely. All patient-oriented websites on dental implants scored above the recommended grade level, and majority of these sites were "difficult" in their readability. There is a dire need to create patient information websites on implants, which the majority can read. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

SURGICAL ORTHODONTICS: LITERATURE REVIEW AND CASE REPORT

Directory of Open Access Journals (Sweden)

Piyush HEDA

2013-03-01

Full Text Available Orthognathic surgery is a surgical procedure largely practiced throughout the world for the correction of various maxillofacial deformities. The procedure for correcting a particular deformity will be done after proper evaluation, which includes cephalometric, dental model analysis and photographs. The patient undergoes pre-surgical orthodontic correction for dental compensation, after which surgery is planned. During the last few decades, the profession has witnessed intense interest for the treatment of facial deformities, being widely practiced throughout the world. Orthognathic surgery has become an acceptable treatment plan for patients with various maxillofacial deformities, giving pleasing results. The present study reports the successful treatment method of Class II division 1 malocclusion through orthognathic surgery.

Revisiting the stability of mini-implants used for orthodontic anchorage

Directory of Open Access Journals (Sweden)

Chung-Chen Jane Yao

2015-11-01

Conclusion: This study revealed that once the dental surgeon becomes familiar with the procedure, the stability of orthodontic mini-implants depends on the type of mini-implant, age of the patient, implantation site, and the healing time of the mini-implant. Miniplates are a more feasible anchorage system when miniscrews fail repeatedly.

Mechanical evaluation of space closure loops in Orthodontics

OpenAIRE

Rodrigues, Eduardo Uggeri; Maruo, Hiroshi; Guariza Filho, Odilon; Tanaka, Orlando; Camargo, Elisa Souza

2011-01-01