WorldWideScience

Sample records for tin 131

  1. Tin

    Science.gov (United States)

    Kamilli, Robert J.; Kimball, Bryn E.; Carlin, James F.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    Tin (Sn) is one of the first metals to be used by humans. Almost without exception, tin is used as an alloy. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. The major uses of tin today are for cans and containers, construction materials, transportation materials, and solder. The predominant ore mineral of tin, by far, is cassiterite (SnO2).In 2015, the world’s total estimated mine production of tin was 289,000 metric tons of contained tin. Total world reserves at the end of 2016 were estimated to be 4,700,000 metric tons. China held about 24 percent of the world’s tin reserves and accounted for 38 percent of the world’s 2015 production of tin.The proportion of scrap used in tin production is between 10 and 25 percent. Unlike many metals, tin recycling is relatively efficient, and the fraction of tin in discarded products that get recycled is greater than 50 percent.Only about 20 percent of the world’s identified tin resources occur as primary hydrothermal hard-rock veins, or lodes. These lodes contain predominantly high-temperature minerals and almost invariably occur in close association with silicic, peraluminous granites. About 80 percent of the world’s identified tin resources occur as unconsolidated secondary or placer deposits in riverbeds and valleys or on the sea floor. The largest concentration of both onshore and offshore placers is in the extensive tin belt of Southeast Asia, which stretches from China in the north, through Thailand, Burma (also referred to as Myanmar), and Malaysia, to the islands of Indonesia in the south. Furthermore, tin placers are almost always found closely allied to the granites from which they originate. Other countries with significant tin resources are Australia, Bolivia, and Brazil.Most hydrothermal tin deposits belong to what can be thought of as a superclass of porphyry-greisen deposits. The hydrothermal tin deposits are all characterized by a close spatial

  2. TIN-X

    DEFF Research Database (Denmark)

    Cannon, Daniel C; Yang, Jeremy J; Mathias, Stephen L

    2017-01-01

    between proteins and diseases, based on text mining data processed from scientific literature. In the current implementation, TIN-X supports exploration of data for G-protein coupled receptors, kinases, ion channels, and nuclear receptors. TIN-X supports browsing and navigating across proteins......Motivation: The increasing amount of peer-reviewed manuscripts requires the development of specific mining tools to facilitate the visual exploration of evidence linking diseases and proteins. Results: We developed TIN-X, the Target Importance and Novelty eXplorer, to visualize the association...

  3. Toxicology of inorganic tin

    International Nuclear Information System (INIS)

    Burba, J.V.

    1982-01-01

    Tin(II) or stannous ion as a reducing agent is important in nuclear medicine because it is an essential component and common denominator for many in vivo radiodiagnostic agents, commonly called kits for the preparation of radiopharmaceuticals. This report is intended to alert nuclear medicine community regarding the wide range of biological effects that the stannous ion is capable of producing, and is a review of a large number of selected publications on the toxicological potential of tin(II)

  4. 131I Metaiodobenzylguanidine scintigraphy

    International Nuclear Information System (INIS)

    Izumi, Motomori; Morimoto, Isao; Yamashita, Shunichi; Hirayu, Hideshi; Nagataki, Shigenobu

    1988-01-01

    A newly developed radiopharmaceutical agent, 131 I-metaiodobenzylguanidine ( 131 I-MIBG) has been reported to be very useful for locating pheochromocytoma and to be specific for pheochromocytoma and safe for humans. The first 131 I-MIBG scintiscanning in Japan which has been carried out in our clinic and the analysis of clinical experience of 131 I-MIBG scanning in Japan are presented

  5. Superconducting tin core fiber

    International Nuclear Information System (INIS)

    Homa, Daniel; Liang, Yongxuan; Hill, Cary; Kaur, Gurbinder; Pickrell, Gary

    2015-01-01

    In this study, we demonstrated superconductivity in a fiber with a tin core and fused silica cladding. The fibers were fabricated via a modified melt-draw technique and maintained core diameters ranging from 50-300 microns and overall diameters of 125-800 microns. Superconductivity of this fiber design was validated via the traditional four-probe test method in a bath of liquid helium at temperatures on the order of 3.8 K. The synthesis route and fiber design are perquisites to ongoing research dedicated all-fiber optoelectronics and the relationships between superconductivity and the material structures, as well as corresponding fabrication techniques. (orig.)

  6. Layered tin dioxide microrods

    International Nuclear Information System (INIS)

    Duan Junhong; Huang Hongbo; Gong Jiangfeng; Zhao Xiaoning; Cheng Guangxu; Yang Shaoguang

    2007-01-01

    Single-crystalline layered SnO 2 microrods were synthesized by a simple tin-water reaction at 900 deg. C. The structural and optical properties of the sample were characterized by x-ray powder diffraction, energy-dispersive x-ray spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy, Raman scattering and photoluminescence (PL) spectroscopy. High resolution transmission electron microscopy studies and selected area electron diffraction patterns revealed that the layered SnO 2 microrods are single crystalline and their growth direction is along [1 1 0]. The growth mechanism of the microrods was proposed based on SEM, TEM characterization and thermodynamic analysis. It is deduced that the layered microrods grow by the stacking of SnO 2 sheets with a (1 1 0) surface in a vapour-liquid-solid process. Three emission peaks at 523, 569 and 626 nm were detected in room-temperature PL measurements

  7. Hydrolysis of bis(dimethylamido)tin to tin (II) oxyhydroxide and its selective transformation into tin (II) or tin (IV) oxide

    KAUST Repository

    Khanderi, Jayaprakash; Shi, Lei; Rothenberger, Alexander

    2015-01-01

    Sn6O4(OH)4, a hydrolysis product of Sn(NMe2)2, is transformed to tin (II) or tin (IV) oxide by solid and solution phase processing. Tin (II) oxide is formed by heating Sn6O4(OH)4 at ≤200 °C in air or under inert atmosphere. Tin (IV) oxide

  8. Total β-decay energies and masses of tin, antimony and tellurium isotopes in the vicinity of 50132Sn82

    International Nuclear Information System (INIS)

    Lund, E.; Aleklett, K.; Rudstam, G.

    1977-01-01

    Experimental β-decay energies for short-lived isotopes of tin, antimony and tellurium are presented. Mass-separated sources were produced at the on-line isotope separator OSIRIS. By applying β-γ coincidence methods, total β-decay energies have been determined for the following nuclides: 127-131 Sn, 128 130 131 134 Sb and 134 135 Te. The atomic mass excess has been derived for these nuclei, and comparisons are made with mass formula predictions. (Auth.)

  9. Methods of producing cesium-131

    Science.gov (United States)

    Meikrantz, David H; Snyder, John R

    2012-09-18

    Methods of producing cesium-131. The method comprises dissolving at least one non-irradiated barium source in water or a nitric acid solution to produce a barium target solution. The barium target solution is irradiated with neutron radiation to produce cesium-131, which is removed from the barium target solution. The cesium-131 is complexed with a calixarene compound to separate the cesium-131 from the barium target solution. A liquid:liquid extraction device or extraction column is used to separate the cesium-131 from the barium target solution.

  10. Measuring the sustainability of tin in China.

    Science.gov (United States)

    Yang, Congren; Tan, Quanyin; Zeng, Xianlai; Zhang, Yuping; Wang, Zhishi; Li, Jinhui

    2018-09-01

    Tin is a component of many items used in daily activities, including solder in consumer electronics, tin can containing food and beverages, polyvinyl chloride stabilizers in construction products, catalysts in industrial processes, etc. China is the largest producer and consumer of refined tin, and more than 60% of this refined tin is applied in the electronics sector as solder. China is the leader in global economic growth; simultaneously, China is also a major producer and consumer of electrical and electronic equipment (EEE). Thus, future tin supply and demand in China are forecasted, based on the gross domestic product per capita and the average consumption of refined tin in past five years. Current tin reserves and identified resources in China can meet the future two decades of mine production, but import of tin will also be critical for China's future tin consumption. However, there will be a lot of uncertainty for import of tin from other countries. At the same time, virgin mining of geological ores is a process of high energy consumption and destruction of the natural environment. Hence recycling tin from Sn-bearing secondary resources like tailings and waste electrical and electronic equipment (WEEE) can not only address the shortage of tin mineral resources, but also save energy and protect the ecological environment. Copyright © 2018 Elsevier B.V. All rights reserved.

  11. International strategic minerals inventory summary report; tin

    Science.gov (United States)

    Sutphin, D.M.; Sabin, A.E.; Reed, B.L.

    1990-01-01

    The International Strategic Minerals Inventory tin inventory contains records for 56 major tin deposits and districts in 21 countries. These countries accounted for 98 percent of the 10 million metric tons of tin produced in the period 1934-87. Tin is a good alloying metal and is generally nontoxic, and its chief uses are as tinplate for tin cans and as solder in electronics. The 56 locations consist of 39 lode deposits and 17 placers and contain almost 7.5 million metric tons of tin in identified economic resources (R1E) and another 1.5 million metric tons of tin in other resource categories. Most of these resources are in major deposits that have been known for over a hundred years. Lode deposits account for 44 percent of the R1E and 87 percent of the resources in other categories. Placer deposits make up the remainder. Low-income and middle-income countries, including Bolivia and Brazil and countries along the Southeast Asian Tin Belt such as Malaysia, Thailand, and Indonesia account for 91 percent of the R1E resources of tin and for 61 percent of resources in other categories. The United States has less than 0.05 percent of the world's tin R1E in major deposits. Available data suggest that the Soviet Union may have about 4 percent of resources in this category. The industrial market economy countries of the United States, Japan, Federal Republic of Germany, and the United Kingdom are major consumers of tin, whereas the major tin-producing countries generally consume little tin. The Soviet Union and China are both major producers and consumers of tin. At the end of World War II, the four largest tin-producing countries (Bolivia, the Belgian Congo (Zaire), Nigeria, and Malaysia) produced over 80 percent of the world's tin. In 1986, the portion of production from the four largest producers (Malaysia, Brazil, Soviet Union, Indonesia) declined to about 55 percent, while the price of tin rose from about $1,500 to $18,000 per metric ton. In response to tin shortages

  12. Chemistry of tin compounds and environment

    International Nuclear Information System (INIS)

    Ali, S.; Mazhar, M.; Mahmood, S.; Bhatti, M.H.; Chaudhary, M.A.

    1997-01-01

    Of the large volume of tin compounds reported in the literature, possible only 100 are commercially important. Tin compounds are a wide variety of purposes such as catalysts, stabilizers for many materials including polymer, biocidal agents, bactericides, insecticides, fungicides, wood preservatives, acaricides and anti fouling agents in paints, anticancer and antitumour agents, ceramic opacifiers, as textile additives, in metal finishing operations, as food additives and in electro conductive coating. All these applications make the environment much exposed to tin contamination. The application of organotin compounds as biocides account for about 30% of total tin consumption suggesting that the main environmental effects are likely to originate from this sector. Diorgano tins and mono-organo tins are used mainly in plastic industry which is the next big source for environmental pollution. In this presentation all environmental aspects of the use of tin compounds and the recommended preventive measures are discussed. (author)

  13. The Moessbauer effect in binary tin chalcogenides of tin 119

    International Nuclear Information System (INIS)

    Ortalli, I.; Fano, V.

    1975-01-01

    The values of the isomer shift, quadrupole splitting, Moessbauer coefficient, Debye temperature for the tin chalcogenides SnS. SnSe, SnTe are tabulated for the temperatures 80 and 300 K. Temperature dependences of the Moessbauer coefficient and of the effective Debye temperature for SnS, SnSe and SnTe in a temperature range of 78 to 300 K are presented. (Z.S.)

  14. Studies on Cementation of Tin on Copper and Tin Stripping from Copper Substrate

    Directory of Open Access Journals (Sweden)

    Rudnik E.

    2016-06-01

    Full Text Available Cementation of tin on copper in acid chloride-thiourea solutions leads to the formation of porous layers with a thickness dependent on the immersion time. The process occurs via Sn(II-Cu(I mechanism. Chemical stripping of tin was carried out in alkaline and acid solutions in the presence of oxidizing agents. It resulted in the dissolution of metallic tin, but refractory Cu3Sn phase remained on the copper surface. Electrochemical tin stripping allows complete tin removal from the copper substrate, but porosity and complex phase composition of the tin coating do not allow monitoring the process in unambiguous way.

  15. Tinned fish with radioprotective ingredients

    International Nuclear Information System (INIS)

    Chaneva, M.; Minkova, M.; Zajko, G.

    1992-01-01

    A survey of food ingredients with pronounced radioprotective properties is made. The protective effect of fish proteins and some vegetable oils is mentioned. As suitable additives to tinned fish during the manufacturing process the β carotene, anthocyans and apple pectin are pointed out. β-carotene possesses the ability to absorb radiations. It can be added either as a pure crystalline substance or dissolved in the vegetable oil. Anthocyans have an antimutagen effect due to their ability to inhibit free radical reactions. Some vegetable polyphenols can be added with wine. The Bulgarian anthocyan concentrate Enobagrin (made by extraction of marc and wine) is also proposed. A combination of Enobagrin, β-tocopherol and pyracetam decreases the postradiation hypoplasia. Special attention is paid to the importance of the pectin in intoxication with heavy radioactive metals. It is thought that the pectin forms unsoluble complex compounds with Fe, Zn, Cd, Co, Pb, Hg, Mn, Cr. The binding energy depends on the available carboxylic groups. Some experiments showing the interaction of the pectin with 90 Sr are mentioned. In the tinned fish the pectin can be introduced with tomato paste. Vegetables rich in pectin and carotene - carrots and tomato concentrate - can be added as well. Proposed enriched tinned fish can be used as a preventive radioprotective food under conditions of increased radiation risk. 19 refs

  16. Indium tin oxide surface smoothing by gas cluster ion beam

    CERN Document Server

    Song, J H; Choi, W K

    2002-01-01

    CO sub 2 cluster ions are irradiated at the acceleration voltage of 25 kV to remove hillocks on indium tin oxide (ITO) surfaces and thus to attain highly smooth surfaces. CO sub 2 monomer ions are also bombarded on the ITO surfaces at the same acceleration voltage to compare sputtering phenomena. From the atomic force microscope results, the irradiation of monomer ions makes the hillocks sharper and the surfaces rougher from 1.31 to 1.6 nm in roughness. On the other hand, the irradiation of CO sub 2 cluster ions reduces the height of hillocks and planarize the ITO surfaces as smooth as 0.92 nm in roughness. This discrepancy could be explained by large lateral sputtering yield of the cluster ions and re-deposition of sputtered particles by the impact of the cluster ions on surfaces.

  17. Structural studies of supported tin catalysts

    Science.gov (United States)

    Nava, Noel; Viveros, Tomás

    1999-11-01

    Tin oxide was supported on aluminium oxide, titanium oxide, magnesium oxide and silicon oxide, and the resulting interactions between the components in the prepared samples and after reduction were characterized by Mössbauer spectroscopy. It was observed that in the oxide state, tin is present as SnO2 on alumina, magnesia and silica, but on titania tin occupies Ti sites in the structure. After hydrogen treatment at high temperatures, tin is reduced from Sn(4) to Sn(2) on alumina and titania; it is reduced from Sn(4) to Sn(0) on silica, and is practically not reduced on magnesia. These results reveal the degree of interaction between tin and the different supports studied.

  18. Structural studies of supported tin catalysts

    International Nuclear Information System (INIS)

    Nava, Noel; Viveros, Tomas

    1999-01-01

    Tin oxide was supported on aluminium oxide, titanium oxide, magnesium oxide and silicon oxide, and the resulting interactions between the components in the prepared samples and after reduction were characterized by Moessbauer spectroscopy. It was observed that in the oxide state, tin is present as SnO 2 on alumina, magnesia and silica, but on titania tin occupies Ti sites in the structure. After hydrogen treatment at high temperatures, tin is reduced from Sn(4) to Sn(2) on alumina and titania; it is reduced from Sn(4) to Sn(0) on silica, and is practically not reduced on magnesia. These results reveal the degree of interaction between tin and the different supports studied

  19. On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries

    International Nuclear Information System (INIS)

    Böhme, Solveig; Edström, Kristina; Nyholm, Leif

    2015-01-01

    As tin based electrodes are of significant interest in the development of improved lithium-ion batteries it is important to understand the associated electrochemical reactions. In this work it is shown that the electrochemical behavior of SnO_2 coated tin electrodes can be described based on the SnO_2 and SnO conversion reactions, the lithium tin alloy formation and the oxidation of tin generating SnF_2. The CV, XPS and SEM data, obtained for electrodeposited tin crystals on gold substrates, demonstrates that the capacity loss often observed for SnO_2 is caused by the reformed SnO_2 layer serving as a passivating layer protecting the remaining tin. Capacities corresponding up to about 80 % of the initial SnO_2 capacity could, however, be obtained by cycling to 3.5 V vs. Li"+/Li. It is also shown that the oxidation of the lithium tin alloy is hindered by the rate of the diffusion of lithium through a layer of tin with increasing thickness and that the irreversible oxidation of tin to SnF_2 at potentials larger than 2.8 V vs. Li"+/Li is due to the fact that SnF_2 is formed below the SnO_2 layer. This improved electrochemical understanding of the SnO_2/Sn system should be valuable in the development of tin based electrodes for lithium-ion batteries.

  20. Temperature measurement of tin under shock compression

    International Nuclear Information System (INIS)

    Hereil, Pierre-Louis; Mabire, Catherine

    2002-01-01

    The results of pyrometric measurements performed at the interface of a tin target with a LiF window material are presented for stresses ranging from 38 to 55 GPa. The purpose of the study is to analyze the part of the interface in the temperature measurement by a multi-channel pyrometric device. The results show that the glue used at target/window interface remains transparent under shock. The values of temperature measured at the tin/LiF interface are consistent with the behavior of tin under shock

  1. Tin-antimony oxide oxidation catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Frank J. [Open University, Department of Chemistry (United Kingdom)

    1998-12-15

    Tin-antimony oxide catalysts for the selective oxidation of hydrocarbons have been made by precipitation techniques. The dehydration of the amorphous dried precipitate by calcination at increasingly higher temperatures induces the crystallisation of a rutile-related tin dioxide-type phase and the segregation of antimony oxides which volatilise at elevated temperatures. The rutile-related tin dioxide-type phase contains antimony(V) in the bulk and antimony(III) in the surface. Specific catalytic activity for the oxidative dehydrogenation of butene to butadiene is associated with materials with large concentrations of antimony(III) in the surface.

  2. Electrochemical dissolution of tin in methanesulphonic acid solutions

    NARCIS (Netherlands)

    de Greef, R.A.T.; Janssen, L.J.J.

    2001-01-01

    High-rate electroplating of tin on a moving steel strip is generally carried out in cells with dimensionally stable anodes. To obtain a matt tin deposit a concentrated acidic tin methanesulphonate solution containing a small concentration of sulphuric acid is used. The concentrated tin

  3. Radioactive Iodine (I-131) Therapy for Hyperthyroidism

    Science.gov (United States)

    ... Physician Resources Professions Site Index A-Z Radioactive Iodine (I-131) Therapy Radioiodine therapy is a nuclear ... thyroid cancer. When a small dose of radioactive iodine I-131 (an isotope of iodine that emits ...

  4. Mitigating tin whisker risks theory and practice

    CERN Document Server

    Handwerker, Carol A; Bath, Jasbir

    2016-01-01

    Discusses the growth mechanisms of tin whiskers and the effective mitigation strategies necessary to reduce whisker growth risks. This book covers key tin whisker topics, ranging from fundamental science to practical mitigation strategies. The text begins with a review of the characteristic properties of local microstructures around whisker and hillock grains to identify why these particular grains and locations become predisposed to forming whiskers and hillocks. The book discusses the basic properties of tin-based alloy finishes and the effects of various alloying elements on whisker formation, with a focus on potential mechanisms for whisker suppression or enhancement for each element. Tin whisker risk mitigation strategies for each tier of the supply chain for high reliability electronic systems are also described.

  5. 49 CFR 237.131 - Design.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Design. 237.131 Section 237.131 Transportation... TRANSPORTATION BRIDGE SAFETY STANDARDS Repair and Modification of Bridges § 237.131 Design. Each repair or... component of a bridge shall be designed by a railroad bridge engineer. The design shall specify the manner...

  6. 21 CFR 131.115 - Concentrated milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Concentrated milk. 131.115 Section 131.115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.115...

  7. 21 CFR 131.130 - Evaporated milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Evaporated milk. 131.130 Section 131.130 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.130 Evaporated milk. (a...

  8. 21 CFR 131.110 - Milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Milk. 131.110 Section 131.110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.110 Milk. (a...

  9. 40 CFR 131.40 - Puerto Rico

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Puerto Rico 131.40 Section 131.40... Federally Promulgated Water Quality Standards § 131.40 Puerto Rico (a) Use designations for marine waters. In addition to the Commonwealth's adopted use designations, the following waterbodies in Puerto Rico...

  10. 21 CFR 131.206 - Nonfat yogurt.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Nonfat yogurt. 131.206 Section 131.206 Food and... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.206 Nonfat yogurt. (a) Description. Nonfat yogurt is the food produced by culturing one or more of the optional dairy ingredients...

  11. 21 CFR 131.200 - Yogurt.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Yogurt. 131.200 Section 131.200 Food and Drugs... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.200 Yogurt. (a) Description. Yogurt is the food produced by culturing one or more of the optional dairy ingredients specified...

  12. 21 CFR 131.203 - Lowfat yogurt.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Lowfat yogurt. 131.203 Section 131.203 Food and... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.203 Lowfat yogurt. (a) Description. Lowfat yogurt is the food produced by culturing one or more of the optional dairy ingredients...

  13. 24 CFR 886.131 - Audit.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Audit. 886.131 Section 886.131... Projects With HUD-Insured and HUD-Held Mortgages § 886.131 Audit. (a) Where a State or local government is... assistance under this part, the audit requirements in 24 CFR part 44 shall apply. (b) Where a nonprofit...

  14. 46 CFR 45.131 - Ventilators.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Ventilators. 45.131 Section 45.131 Shipping COAST GUARD....131 Ventilators. (a) Ventilators passing through superstructures other than enclosed superstructures must have coamings of steel or equivalent material at the freeboard deck. (b) Ventilators in position 1...

  15. Therapeutical uses of 131I

    International Nuclear Information System (INIS)

    Lago, Graciela.

    1994-01-01

    Physiology of thyroid gland, pathology of thyroid , papillary, follicular cancer is considered together as differentiated thyroid cancer with very good results under therapy with iodine, invitro determination of calcitonin, search of metastasis, anaplastic carcinoma, as indifferentiated carcinoma with similar results as medullary carcinoma. This work gives a protocol for therapeutical use of 131I , in hyperthyroidism due to Graves-Basedow disease, thyrotoxic adenoma or Plummer disease, toxic multi nodular goiter, subacute thyroiditis. Is studied too the treatment with pharmaceuticals, surgery and radioactive iodine. A recommended use of each and protocol for iodine administration, fixed dose technique, dose estimation,absorbed dose, recommendations about when to use and not use 131I are included in this work

  16. Low-temperature Synthesis of Tin(II) Oxide From Tin(II) ketoacidoximate Precursor

    KAUST Repository

    Alshankiti, Buthainah

    2015-01-01

    Sn (II) oxide finds numerous applications in different fields such as thin film transistors1, solar cells2 and sensors.3 In this study we present the fabrication of tin monoxide SnO by using Sn (II) ketoacid oximate complexes as precursors. Tin (II

  17. IMPEDANCE SPECTROSCOPY OF POLYCRYSTALLINE TIN DIOXIDE FILMS

    Directory of Open Access Journals (Sweden)

    D. V. Adamchuck

    2016-01-01

    Full Text Available The aim of this work is the analysis of the influence of annealing in an inert atmosphere on the electrical properties and structure of non-stoichiometric tin dioxide films by means of impedance spectroscopy method. Non-stoichiometric tin dioxide films were fabricated by two-step oxidation of metallic tin deposited on the polycrystalline Al2O3 substrates by DC magnetron sputtering. In order to modify the structure and stoichiometric composition, the films were subjected to the high temperature annealing in argon atmosphere in temperature range 300–800 °С. AC-conductivity measurements of the films in the frequency range 20 Hz – 2 MHz were carried out. Variation in the frequency dependencies of the real and imaginary parts of the impedance of tin dioxide films was found to occur as a result of high-temperature annealing. Equivalent circuits for describing the properties of films with various structure and stoichiometric composition were proposed. Possibility of conductivity variation of the polycrystalline tin dioxide films as a result of аnnealing in an inert atmosphere was demonstrated by utilizing impedance spectroscopy. Annealing induces the recrystallization of the films, changing in their stoichiometry as well as increase of the sizes of SnO2 crystallites. Variation of electrical conductivity and structure of tin dioxide films as a result of annealing in inert atmosphere was confirmed by X-ray diffraction analysis. Analysis of the impedance diagrams of tin dioxide films was found to be a powerful tool to study their electrical properties. 

  18. Preliminary study of tin slag concrete mixture

    Science.gov (United States)

    Hashim, Mohd Jamil; Mansor, Ishak; Pauzi Ismail, Mohamad; Sani, Suhairy; Azmi, Azhar; Sayuti, Shaharudin; Zaidi Ibrahim, Mohd; Adli Anuar, Abul; Rahim, Abdul Adha Abdul

    2018-01-01

    The study focuses on practices to facilitate tin smelting industry to reduce radioactive waste product (Tin Slag) by diluting its radioactivity to a safe level and turning it to a safer infrastructural building product. In the process the concrete mix which include Portland cement, sand, tin slag, water and plasticizer are used to produce interlocking brick pavements, piles and other infrastructural products. The mixing method follows DOE (UK) standard method of mixing targeted at in selected compressive strength suitable for its function and durability. A batching machine is used in the mixing and six test cubes are produced for the test. The testing equipment used are a compressional machine, ultrasonic measurement and a Geiger Muller counter to evaluate of the concrete mix to find the lowest emission of radiation surface dose without compromising the strength of concrete mix. The result obtained indicated the radioactivity of tin slag in the mixing process has reduced to background level that is 0.5μSv/h while the strength and workability of the concrete has not been severely affected. In conclusion, the concrete mix with tin slag has shown the potential it can be turned into a safe beneficial infrastructural product with good strength.

  19. Comparative assessment of gastrointestinal irritant potency in man of tin(II) chloride and tin migrated from packaging.

    Science.gov (United States)

    Boogaard, Peter J; Boisset, Michel; Blunden, Steve; Davies, Scot; Ong, Teng Jin; Taverne, Jean-Pierre

    2003-12-01

    Tin is present in low concentrations in most canned foods and beverages, the highest levels being found in products packaged in unlacquered or partially lacquered tinplate cans. A limited number of case-reports of acute gastrointestinal disorders after consumption of food containing 100-500 mg/kg tin have been reported, but these reports suffer many insufficiencies. Controlled clinical studies on acute effects of tin migrated from packaging suggest a threshold concentration for adverse effects (AEs) of >730 mg/kg. Two separate randomised, single-centre, double-blind, crossover studies, enabling comparison of the tolerability of tin added as tin(II) chloride at concentrations of soup in 24 volunteers (Study 2) were carried out. Distribution studies were conducted to get insight in the acute AEs of low molecular weight (clear dose-response relationship was only observed when tin was added as tin(II) chloride in tomato juice. No clinically significant AEs were reported in Study 2 and comparison of the incidence of tin-related AEs showed no difference between the dose levels (including control). Tin species of low molecular weight in supernatant represented 31-32% of total tin in canned tomato soup versus 56-61% in juice freshly spiked with tin(II) chloride. Differences in the incidence of AEs following administration of tomato juice with 161 and 264 mg of tin per kg and tomato soup with 201 and 267 mg of tin per kg likely results from differences in the concentration of low molecular weight tin species and in the nature of tin complexes formed. The results of this work demonstrate that tin levels up to 267 mg/kg in canned food cause no AEs in healthy adults and support the currently proposed tin levels of 200 mg/kg and 250 mg/kg for canned beverages and canned foods, respectively, as safe levels for adults in the general population.

  20. Proton transport properties of tin phosphate, chromotropic acid ...

    Indian Academy of Sciences (India)

    The functionalized materials of tin (IV) phosphate (SnP) like chromotropic acid anchored tin ... elemental analysis (ICP–AES), thermal analysis, X-ray analysis and FTIR spectroscopy. .... nal level below 1 V, interfaced to a minicomputer for data.

  1. Microwave plasma CVD of NANO structured tin/carbon composites

    Science.gov (United States)

    Marcinek, Marek [Warszawa, PL; Kostecki, Robert [Lafayette, CA

    2012-07-17

    A method for forming a graphitic tin-carbon composite at low temperatures is described. The method involves using microwave radiation to produce a neutral gas plasma in a reactor cell. At least one organo tin precursor material in the reactor cell forms a tin-carbon film on a supporting substrate disposed in the cell under influence of the plasma. The three dimensional carbon matrix material with embedded tin nanoparticles can be used as an electrode in lithium-ion batteries.

  2. Recurrent thyrotoxicosis after I-131 induced hypothyroidism

    International Nuclear Information System (INIS)

    Liu, L.; Borowski, G.D.; Shtasel, P.; Rose, L.I.

    1984-01-01

    The first clinically and biochemically documented case of recurrent thyrotoxicosis after I-131 induced hypothyroidism in a patient with Graves' disease is reported. Two months after the administration of 9.2 mCi of I-131, the subject developed hypothyroidism. One month later, the patient became euthyroid. Then, nine months following ablation, the patient again developed thyrotoxicosis. A second dose of I-131 of 12.5 mCi was required to finally produce permanent hypothyroidism. This case illustrates the recurrence of hypothyroidism after what had seemed to have been adequate I-131 radiation

  3. Synthesising highly reactive tin oxide using Tin(II2- ethylhexanoate polynucleation as precursor

    Directory of Open Access Journals (Sweden)

    Alejandra Montenegro Hernández

    2009-01-01

    Full Text Available Tin oxide is a widely used compound in technological applications, particularity as a catalyst, gas sensor and in making varistors, transparent conductors, electrocatalytic electrodes and photovoltaic cells. An ethylhexanoate tin salt, a carboxylic acid and poly-esterification were used for synthesising highly reactive tin oxide in the present study. Synthesis was controlled by Fourier transform infrared (FTIR spectroscopy and recording changes in viscosity. The tin oxide characteristics so obtained were determined using FTIR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The SnO2 dust synthesised and heat-treated at 550°C yielded high density aggregates, having greater than 50 μm particle size. This result demonstrates the high reactivity of the ceramic powders synthesised here.

  4. Hydrolysis of bis(dimethylamido)tin to tin (II) oxyhydroxide and its selective transformation into tin (II) or tin (IV) oxide

    KAUST Repository

    Khanderi, Jayaprakash

    2015-03-01

    Sn6O4(OH)4, a hydrolysis product of Sn(NMe2)2, is transformed to tin (II) or tin (IV) oxide by solid and solution phase processing. Tin (II) oxide is formed by heating Sn6O4(OH)4 at ≤200 °C in air or under inert atmosphere. Tin (IV) oxide nanoparticles are formed in the presence of a carboxylic acid and base in air at room temperature. IR spectroscopy, Raman spectroscopy, thermogravimetry (coupled with infrared spectroscopy), powder X-ray diffraction, high temperature X-ray diffraction, scanning electron and transmission electron microscopy are used for the characterization of Sn6O4(OH)4 and the investigation of its selective decomposition into SnO or SnO2. Spectroscopic and X-ray diffraction results indicate that SnO is formed by the removal of water from crystalline Sn6O4(OH)4. SEM shows octahedral morphology of the Sn6O4(OH)4, SnO and SnO2 with particle size from 400 nm-2 μm during solid state conversion. Solution phase transformation of Sn6O4(OH)4 to SnO2 occurs in the presence of potassium glutarate and oxygen. SnO2 particles are 15-20 nm in size.

  5. NMR studies of metallic tin confined within porous matrices

    International Nuclear Information System (INIS)

    Charnaya, E. V.; Tien, Cheng; Lee, M. K.; Kumzerov, Yu. A.

    2007-01-01

    119 Sn NMR studies were carried out for metallic tin confined within synthetic opal and porous glass. Tin was embedded into nanoporous matrices in the melted state under pressure. The Knight shift for liquid confined tin was found to decrease with decreasing pore size. Correlations between NMR line shapes, Knight shift, and pore filling were observed. The melting and freezing phase transitions of tin under confinement were studied through temperature dependences of NMR signals upon warming and cooling. Melting of tin within the opal matrix agreed well with the liquid skin model suggested for small isolated particles. The influence of the pore filling on the melting process was shown

  6. 9 CFR 3.131 - Sanitation.

    Science.gov (United States)

    2010-01-01

    ... Warmblooded Animals Other Than Dogs, Cats, Rabbits, Hamsters, Guinea Pigs, Nonhuman Primates, and Marine... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sanitation. 3.131 Section 3.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL...

  7. Labelling of tung oil with 131I

    International Nuclear Information System (INIS)

    Correia, R.J.; Mitta, A.E.A.

    1975-01-01

    A method for labelling Tung Oil with 131 I is described. The oil is dissolved in peroxide free, dry ethyl ether and then it is treated with 131 ICl. A 2,5% mercuric acetate solution in glacial acetic acid is added as a catalist. A radiochemical yield of 100% is achieved in 20 minutes. (author)

  8. Iodine 131 and 133 as Fission Indicators

    Energy Technology Data Exchange (ETDEWEB)

    Broda, E.

    1944-07-01

    This report was written by E. Broda at the Cavendish Laboratory (Cambridge) in September 1944 and is about the possible use of Iodine 131 and 133 as fission indicators. Additionally, the description of the chemical procedure for I 131 and I 133 and the corresponding results can be found in this report. (nowak)

  9. Malignant disease after iodine-131 therapy

    International Nuclear Information System (INIS)

    Holm, L.E.; Hall, P.; Lundell, G.

    1991-01-01

    Iodine-131 therapy is one of the most common treatments for hyperthyroidism and thyroid cancer. Data on man exposed to 131-I are still scarce, and there is concern as to its possible genetic and carcinogenic effects. No overall increased cancer risk has been observed in patients receiving 131-I therapy for hyperthyroidism. Two studies have reported increased risks for leukemia after 131-I therapy for throid cancer. Different sites have been demonstrated to be at increased cancer risk in different record-linkage studies of thyroid cancer patients, e.g. bone-marrow, breast and kidney, nervous tissue, and connective tissue. However, the findings are not consistent. This article presents results from a Swedish multicenter cohort study analyzing risks of second primary tumors in patients treated with 131-I for hyperthyroidism or thyroid cancer. 10 refs

  10. Radiopharmaceutical potential of I-131 labelled diazepam

    International Nuclear Information System (INIS)

    Yurt, F.; Unek, P.; Asikoglu, M.; Baggi, S.; Erener, G.; Ozkilic, H.; Uluc, F.; Tuglular, I.

    1998-01-01

    In this study, diazepam is a derivative of the 1.4 benzodiazepine family that the most widely used drug as anticonvulsant agent has been labeled with I-131, as a new radiopharmaceutical and its radiopharmaceutical potential has been determined. Labeling of diazepam has been performed by iodogen method and optimum labeling conditions have been determined. Optimum reaction conditions are 1 mg for iodogen amount; 1-5 mg for diazepam amount, 15-20 minutes for reaction time and room temperature for reaction temperature. Specific activity of labeled compound was 0,15 Ci/mmol level. N-octanol/water ratio was found 1.9 for 131 IDZ ( 131 I labeled diazepam). In vivo experiments have been carried out to determine radiopharmaceutical potentials of labeled compound. Biodistribution studies on rats showed that 131 IDZ have accumulated in kidneys, liver, lungs and brain tissues. Scintigraphic results taken with gamma camera on rabbits agree with biodistribution results of rats. (author)

  11. Axillary iodine-131 accumulation due to perspiration

    International Nuclear Information System (INIS)

    Camponovo, E.J.; Goyer, P.F.; Silverman, E.D.; Kistler, A.M.; Yudt, W.M.

    1989-01-01

    A case of spurious axillary uptake of I-131 proven to be caused by perspiration is presented. False-positive localizations of radioiodine, both pathologic and physiologic, are reviewed to avoid confusion of these entities with functioning thyroid carcinoma metastases

  12. 10 CFR 600.131 - Insurance coverage.

    Science.gov (United States)

    2010-01-01

    ... provided to property owned by the recipient. Federally-owned property need not be insured unless required... Nonprofit Organizations Post-Award Requirements § 600.131 Insurance coverage. Recipients shall, at a minimum...

  13. Characterization of tin selenides synthesized by high-energy milling

    Directory of Open Access Journals (Sweden)

    Marcela Achimovičová

    2011-12-01

    Full Text Available Tin selenides SnSeX (x=1,2 were synthesized from tin and selenium powder precursors by high-energy milling in the planetary ballmill Pulverisette 6 (Fritsch, Germany. The orthorhombic tin selenide SnSe and the hexagonal tin diselenide SnSe2 phases were formed after4 min and 5 min of milling, respectively. Specific surface area of both selenides increased with increasing time of mechanochemicalsynthesis. The particle size distribution analysis demonstrated that the synthesized products contain agglomerated selenide particlesconsisting of numerous idiomorphic tin selenide crystals, measuring from 2 to more than 100 nm in diameter, which were also documentedby TEM. UV-Vis spectrophotometry confirmed that tin selenide particles do not behave as quantum dots.

  14. Quality control procedures for iodinated radiopharmaceuticals 131I-Hippuran and 131I-Risa

    International Nuclear Information System (INIS)

    Toledo e Souza, I.T. de; Pereira, N.P.S. de; Silva, C.P.G. da.

    1986-02-01

    A rapid miniaturized chromatography system was developed for fast determination of the proportion of inorganic radioactive iodide from radiopharmaceutical 131 I-Hippuran and 131 I-Risa. The technical parameters associated with miniaturized chromatography system were evaluated. One of the problems found in this system was the movement of the 131 I-Risa from the origin with consequent overestimation of the inorganic iodide. A correct spot placement eliminated this problem. (Author) [pt

  15. Determination of tin in cassiterite ores by colorimetry of iodometry

    International Nuclear Information System (INIS)

    Rodriguez Hernandez, B.

    1972-01-01

    The analytical methods are described far the determination of tin in cassiterite ores. The gallein-colorimetric method is described for determining small amounts of tin, covering the 0,01-0,5 per cent range. The sample is decomposed by heating with ammonium iodide, and tin is analyzed colorimetrically by means of it s complex with gallein. The final measure may be brought about either visually or spectrophotometrically at 525 nm. (Author)

  16. Preparation of textural lamellar tin deposits via electrodeposition

    Science.gov (United States)

    Wen, Xiaoyu; Pan, Xiaona; Wu, Libin; Li, Ruinan; Wang, Dan; Zhang, Jinqiu; Yang, Peixia

    2017-06-01

    Lamellar tin deposits were prepared by galvanostatical electroplating from the aqueous acidic-sulfate bath, with gelatin and benzalacetone dissolved in ethanol (ABA+EtOH) as additive, and their morphologies were investigated by scanning electron microscopy. Cathodic polarization curves revealed that the absorbability of ABA+EtOH on the cathode surface was higher than that of gelatin. X-ray diffraction analysis indicated preferred orientations of tin growth led to the formation of lamellar structure and distortion of tin lattice. The growth mechanism of lamellar tin was also discussed.

  17. Atomic dynamics of tin nanoparticles embedded into porous glass

    Energy Technology Data Exchange (ETDEWEB)

    Parshin, P. P.; Zemlyanov, M. G., E-mail: zeml@isssph.kiae.ru; Panova, G. Kh.; Shikov, A. A. [Russian Research Centre Kurchatov Institute (Russian Federation); Kumzerov, Yu. A.; Naberezhnov, A. A. [Russian Academy of Sciences, Ioffe Physicotechnical Institute (Russian Federation); Sergueev, I.; Crichton, W. [European Synchrotron Radiation Facility (France); Chumakov, A. I. [Russian Research Centre Kurchatov Institute (Russian Federation); Rueffer, R. [European Synchrotron Radiation Facility (France)

    2012-03-15

    The method of resonant nuclear inelastic absorption of synchrotron radiation has been used to study the phonon spectrum for tin nanoparticles (with a natural isotope mixture) embedded into a porous glassy (silica) matrix with an average pore diameter of 7 nm in comparison to the analogous spectrum of bulk tin enriched with {sup 119}Sn isotope. Differences between the spectra have been observed, which are related to both the dimensional effects and specific structural features of the porous glass-tin nanocomposite. Peculiarities in the dynamics of tin atoms embedded into nanopores of glass are interpreted in terms of a qualitative model of the nanocomposite structure.

  18. Atomic dynamics of tin nanoparticles embedded into porous glass

    International Nuclear Information System (INIS)

    Parshin, P. P.; Zemlyanov, M. G.; Panova, G. Kh.; Shikov, A. A.; Kumzerov, Yu. A.; Naberezhnov, A. A.; Sergueev, I.; Crichton, W.; Chumakov, A. I.; Rüffer, R.

    2012-01-01

    The method of resonant nuclear inelastic absorption of synchrotron radiation has been used to study the phonon spectrum for tin nanoparticles (with a natural isotope mixture) embedded into a porous glassy (silica) matrix with an average pore diameter of 7 nm in comparison to the analogous spectrum of bulk tin enriched with 119 Sn isotope. Differences between the spectra have been observed, which are related to both the dimensional effects and specific structural features of the porous glass-tin nanocomposite. Peculiarities in the dynamics of tin atoms embedded into nanopores of glass are interpreted in terms of a qualitative model of the nanocomposite structure.

  19. Hypothyroidism following 131I therapy for hyperthyroidism

    International Nuclear Information System (INIS)

    Kubo, Atsushi; Kondo, Makoto; Kinoshita, Fumio; Maekawa, Akira; Okamoto, Jiro.

    1977-01-01

    Of 890 patients who received 131 I therapy for hyperthyroidism, the results of therapy were examined on 584 who could be followed up. Of these 502 (86%), were sured including 3 patients who had been completely healed after recurrence, 9 patients are still under medical treatment, and 10 died. The incidence of hypothyroidism following 131 I therapy was 1.6% after 1 year, 2.3% after 2 years, 4.7% after 5 years, 15.0% after 10-12 years, 22.1% after 13-15 years and 27.5% after 16-20 years. The incidence increased constantly with the passage of time. Factors influencing the response to treatment have been investigated. As a consequence, the number of rads delivered to the thyroid gland, the gland size, and previous surgery correlated with the incidence of hypothyroidism. The number of doses of 131 I, uptake and half-life of 131 I in the thyroid, previous antithyroid medication, time between the onset of hyperthyroid symptoms and 131 I therapy, and the age or sex of the patients appeared unrelated. The times taken to become euthyroid following a single dose of 131 I were 5.6 months with 2000-4000 rads, 4.4 months with 4001-7000 rads, 4.2 months with 7001-10000 rads and 3.5 months with more than 10001 rads. The time was prolonged with decrease of rads delivered to the thyroid gland. It was found that the patients who passed through a transient hypothyroid phase in the period of three to four months after administration of 131 I had a high incidence of late permanent hypothyroidism. (Evans, J.)

  20. MAGIC NUCLEI: Tin-100 turns up

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    In the same way as the Periodic Table of chemical elements reflects the successive filling of orbital electron shells, in nuclear physics the socalled 'magic' numbers correspond to closed shells of 2, 8, 20, 28, 50, 82, 126,... neutrons and/or protons. More tightly bound than other nuclei, these are the nuclear analogues of the inert gases. 'Doubly magic' nuclei have closed shells of both neutrons and protons. Examples in nature are helium-4 (2 protons and 2 neutrons), oxygen-16 (8 and 8), calcium-40 (20 and 20) and calcium-48 (20 and 28). Radioactive tin-132 (50+82) has been widely studied

  1. Moessbauer effect in superconducting organosol of tin

    International Nuclear Information System (INIS)

    Dekhtyar, I.Ya.; Zhelibo, E.P.; Kushnir, B.G.; Nishchenko, M.M.; Pan, V.M.; Popov, A.G.; Khvorov, M.M.; AN Ukrainskoj SSR, Kiev. Inst. Kolloidnoj Khimii i Khimii Vody)

    1977-01-01

    Structure of disperse particles (approximately 1 μm) of tin organosols have been investigated by means of the Moessbauer effect. A considerable amount of oxides (up to 20%) in amorphous (SnO 2 ) or in metastable crystalline (SnO) states has been discovered. The observed properties of the Moessbauer spectrum of organosols are compared with measurements of their critical temperature. The effect of impurities and of other structural defects on the dynamic and superconducting properties of organosols is observed. Temperature broadening of lines and temperature variation of the Moessbauer effect value for the particle of different dimensions are in a qualitative agreement with the theory of the granular Moessbauer absorbers

  2. Therapy of hyperthyroidism with Na131I

    International Nuclear Information System (INIS)

    Kakehi, Hirotake; Furukawa, Takashi; Fukakusa, Shunichi; Futonaka, Hiroshi; Takahashi, Yuji

    1984-01-01

    Forty one patients of hyperthyroidism were treated with Na 131 I. Men and women are in the ratio 1:3.1. The ages of patients are between twenties and sixties and the forties are the highest in number. The observation period of clinical courses is between 1 and 8 years. The number of patients observed over 5 years are 51% of them and over 2 years are 83%. The treatment frequency is as follows: On 37 cases each one was treated once with Na 131 I. 2 cases twice, 1 case at 4 times in 3 years and 1 case at 5 times in 6 years. The treatment doses are between 4,000-6,000 rad (40-60 Gray). In the cases treated with the irradiation dose of 6,000 rad, we often saw hypothyroidism. In cases aiming 4,000-5,000 rad, there is a tendency of leaving hyperthyroidism unrecovered. In conclusion, the patients should be treated giving 4,000-5,000 rad or with Na 131 I doses of 3-6mCi. If the effects of the treatment are insufficient, the patients should be further treated with anti-thyroid drug or treated again with Na 131 I. As the result, there are at present 25 cases (61.0%) in normal status of the thyroid gland, 12 cases (29.2%) in hyperthyroidism and 4 cases (9.8%) in hypothyroidism totaling 41 cases in all. (author)

  3. Contamination with iodine-131 in metabolic therapy

    International Nuclear Information System (INIS)

    Garcia, R.; Luis, J.; Gomez, A.; Gonzalez, V.; Herrador, M.; Rogriguez, J.R.

    1997-01-01

    High-dose radioactive iodine therapy using 131 I is the treatment of choice for patients with thyroid cancer following thyroidectomy. Because of the large amount of activity which is excreted during hospitalization, contamination harzard from 131 I excretion via perspiration, saliva, breath and urine may arise. In twelve patients treated with doses of 131 I ranging from 1.85-7.4GBq activity levels were measured in room surface, the toilet, patients saliva and skin. Removable activity from skin reached a maximum at 24h post-therapy. Removable activity from room surfaces exceed the level of contamination which requires clean-up in a public area during patient's hospitalization. The relatively high activities present in the saliva and skin of these patients emphasizes the need for all individuals coming in contact with these patients to be made aware of the contamination hazard present. (author)

  4. I-131 and thyroid-associated ophthalmopathy

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, Aase Krogh; Nygaard, Birte; Feldt-Rasmussen, Ulla

    2000-07-01

    Objective: Radioiodine (I-131) used to obtain euthyroidism in thyrotoxic patients is suspected of having a worsening or provoking effect on thyroid-associated ophthalmopathy (TAO), an autoimmune disease closely related to Graves' disease. Design: This review summarises the existing literature and describes risk factors influencing the course of TAO including thyroid function, cigarette smoking and treatment of Graves' hyperthyroidism especially I-131 therapy. Conclusion: It is recommended that patients who may be at a greater risk of worsening ophthalmopathy are considered when choosing the modality of therapy of hyperthyroidism and also in deciding whether prophylactic systemic glucocorticoid treatment is indicated.

  5. Anomalous growth of whisker-like bismuth-tin extrusions from tin-enriched tin-Bi deposits

    International Nuclear Information System (INIS)

    Hu, C.-C.; Tsai, Y.-D.; Lin, C.-C.; Lee, G.-L.; Chen, S.-W.; Lee, T.-C.; Wen, T.-C.

    2009-01-01

    This article shows the first finding that the anomalous growth of Bi-Sn extrusions from tin-enriched alloys (Sn-xBi with x between 20 and 10 wt.%) can be induced by post-plating annealing in N 2 between 145 and 260 deg. C for 10 min although metal whiskers were commonly formed on the surface of pure metals or alloys of the enriched component. From SEM observations, very similar to Sn whiskers, Bi-Sn extrusions vary in size, shape, length, and diameter with changing the annealing temperature, which are highly important in regarding the potential for failure of electronic products. Annealing resulting in thermal expansion of Sn grains is believed to squeeze the Bi-Sn alloys with relatively low melting points to form whisker-like extrusions although the exact mechanism is unclear

  6. Production of Ba-131/Cs-131 for use in radiotherapy implants. Project 3

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The conditions for the irradiation of anhydrous cesium chloride have been determined for 40 MeV proton beam currents up to 5 microamps. A method for the chemical separation of Ba-131 from the irradiated target material has been developed using chelex-100 ion exchange resin. The elution of Cs-131 from the column has been achieved using 0.2M NH 4 Cl solution, which can be evaporated to dryness, the NH 4 Cl sublimed off, and the Cs-131 obtained as a no-carrier added solid free of other ions, suitable for incorporation into glass or ceramic seeds. 3 refs., 2 figs., 1 tab

  7. Source of Iodine-131 in Europe Identified

    International Nuclear Information System (INIS)

    2011-01-01

    Full text: The IAEA has received information from the Hungarian Atomic Energy Authority (HAEA) that the source of the iodine-131 (I-131) detected in Europe was most probably a release to the atmosphere from the Institute of Isotopes Ltd., Budapest. The Institute of Isotopes Ltd. produces radioisotopes for healthcare, research and industrial applications. According to the HAEA, the release occurred from September 8 to November 16, 2011. The cause of the release is under investigation. As previously mentioned, the levels of I-131 that have been detected in Europe are extremely low. There is no health concern to the population. If any member of the public were to breathe iodine for a whole year at the levels measured in European countries, then they would receive a dose in the range of 0.01 microsieverts for the year. To put this into perspective, the average annual background is 2 400 microsieverts per year. The IAEA was first notified of the presence of trace levels of I-131 by authorities from the Czech Republic on 11 November. Since this notification, the IAEA contacted several member states throughout the region to determine the cause and origin. The IAEA also worked with the World Meteorological Organization (WMO) to conduct air dispersion modelling, as part of efforts to determine the source. (IAEA)

  8. 12 CFR 13.1 - Scope.

    Science.gov (United States)

    2010-01-01

    ... COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY GOVERNMENT SECURITIES SALES PRACTICES § 13.1 Scope. This part applies to national banks that have filed notice as, or are required to file notice as.... 78o-5) and Department of the Treasury rules under section 15C (17 CFR 400.1(d) and part 401). ...

  9. 40 CFR 131.34 - Kansas.

    Science.gov (United States)

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Federally Promulgated Water Quality Standards § 131.34 Kansas. (a) In addition to the State-adopted use... Creek 10270102 88 Secondary Contact Recreation Sand Creek 10270102 65 Secondary Contact Recreation...

  10. 21 CFR 131.160 - Sour cream.

    Science.gov (United States)

    2010-04-01

    ... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.160 Sour cream. (a... of analysis. Referenced methods in paragraph (c) (1) and (2) of this section are from “Official Methods of Analysis of the Association of Official Analytical Chemists,” 13th Ed. (1980), which is...

  11. 7 CFR 4279.131 - Credit quality.

    Science.gov (United States)

    2010-01-01

    ... successful financial and management history vs. start-up businesses; personal/corporate guarantees offered... Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Business and Industry Loans § 4279.131...

  12. Iodine-131 therapy for parotid oncocytoma

    Energy Technology Data Exchange (ETDEWEB)

    Kosuda, S.; Ishikawa, M.; Tamura, K.; Mukai, M.; Kubo, A.; Hashimoto, S.

    1988-06-01

    We present a rare case of a patient with coexisting parotid oncocytoma and chronic thyroiditis who received two therapeutic doses of (/sup 131/I)iodide for a recurrent oncocytoma (oxyphilic granular cell adenoma), resulting in a definite reduction in tumor volume. We suggest that radioiodine therapy for a recurrent oncocytoma is an effective form of tumor therapy.

  13. Thyroid cancer following 131I therapy for hyperthyroidism

    International Nuclear Information System (INIS)

    Watanabe, Iwao

    1980-01-01

    A women aged 37 who had thyroid cancer after 131 I therapy for hyperthyroidism was reported. She had received various conservative therapies and surgical treatments for hyperthyroidism for 10 years before 131 I therapy. Similar cases were picked out from many reports, and their clinical characteristics were discussed. The incidence of thyroid cancer after 131 I therapy, age and sex of patients, dosage of 131 I, histological changes after the irradiation of 131 I, sites of thyroid cancer, and the relationship between 131 I therapy and the occurrence time of thyroid cancer were also considered. (Tsunoda, M.)

  14. Tin and tin-titanium as catalyst components for reversible hydrogen storage of sodium aluminium hydride

    Energy Technology Data Exchange (ETDEWEB)

    Qi Jia Fu; Shik Chi Tsang [University of Reading, Reading (United Kingdom). Surface and Catalysis Research Centre, School of Chemistry

    2006-10-15

    This paper is concerned with the effects of adding tin and/or titanium dopant to sodium aluminium hydride for both dehydrogenation and re-hydrogenation reactions during their reversible storage of molecular hydrogen. Temperature programmed decomposition (TPD) measurements show that the dehydrogenation kinetics of NaAlH{sub 4} are significantly enhanced upon doping the material with 2 mol% of tributyltin hydride, Sn(Bu)3H but the tin catalyst dopant is shown to be inferior than titanium. On the other hand, in this preliminary work, a significant synergetic catalytic effect is clearly revealed in material co-doped with both titanium and tin catalysts which shows the highest reversible rates of dehydrogenation and re-hydrogenation (after their hydrogen depletion). The re-hydrogenation rates of depleted Sn/Ti/NaAlH{sub 4} evaluated at both 9.5 and 140 bars hydrogen are also found to be favourable compared to the Ti/NaAlH{sub 4}, which clearly suggest the importance of the catalyst choice. Basing on these results some mechanistic insights for the catalytic reversible dehydrogenation and re-hydrogenation processes of Sn/Ti/NaAlH{sub 4} are therefore made. 31 refs., 8 figs., 2 tabs.

  15. Directly smelted lead-tin alloys: A historical perspective

    Science.gov (United States)

    Dube, R. K.

    2010-08-01

    This paper discusses evidence related to the genesis and occurrence of mixed lead-tin ore deposit consisting of cassiterite and the secondary minerals formed from galena. These evidences belong to a very long time period ranging from pre-historic to as late as the nineteenth century a.d. This type of mixed ore deposits was smelted to prepare lead-tin alloys. The composition of the alloy depended on the composition of the starting ore mixture. A nineteenth century evidence for the production of directly smelted lead-tin alloys in southern Thailand is discussed. A unique and rather uncommon metallurgical terminology in Sanskrit language— Nāgaja—was introduced in India for the tin recovered from impure lead. This suggests that Indians developed a process for recovering tin from lead-tin alloys, which in all probability was based on the general principle of fire refining. It has been shown that in the context of India the possibility of connection between the word Nāgaja and the directly smelted lead-tin alloys cannot be ruled out.

  16. Radioiodine 131I metabolism in human

    International Nuclear Information System (INIS)

    Mori, Toru

    1976-01-01

    Metabolic fate of orally administered 131 I in human was studied. Chronological observations of whole body radioactivity distribution and thyroid 131 I uptake curve revealed that 131 I metabolism was greatly affected by the amount of dietary iodine intake. Under the high iodine intake exceeding 1 mg per day, uptake curve showed biphasic descending type, that is, rapid accumulation during 3 to 6 hours and rapid fall up to 48 hours and gradual decrease afterwards. While, ascending type, monophasic and maximal at 24 hours, was found universary under low iodine intake less than 500 μg per day. Thyroid function should not be affected by the amount of iodine intake, and we analysed 131 I metabolism using a new four compartments which included intrathyroidal inorganic iodine pool. The results, especially hormone production rate, were found quite useful even under high iodine intake. Thyroidal organic iodine contents were calculated as approximately 2.5 mg and this value was much less than previously reported values from other countries. Administered radioiodine were mixed up with stable body iodine and reached equilibration by around 10 days. From seroimmunological, histological (microscopic and electron microscopic) studies, and irradiation studies to the cultured human thyroid cells, we concluded that this unexpected phenomenon was derived from chromosomal damage which induced gradual decrease in cell population because of inability to reproduce. Carcinogenic and genetic effects were not serious, and only three leukemic patients were reported in this country and 484 normal babies were born from 7,500 treated parents. Thus, therapeutic dose of 131 I was proved rather safe, and even when exposed to radioiodine, administration of perchlorate or thiocyanate, excessive iodine and TSH seemed effective to avoid radiation injuries. (auth.)

  17. Electrodeposition of rhenium-tin nanowires

    International Nuclear Information System (INIS)

    Naor-Pomerantz, Adi; Eliaz, Noam; Gileadi, Eliezer

    2011-01-01

    Highlights: → Rhenium-tin nanowires were formed electrochemically, without using a template. → The nanowires consisted of a crystalline-Sn-core/amorphous-Re-shell structure. → The effects of bath composition and operating conditions were investigated. → A mechanism is suggested for the formation of the core/shell structure. → The nanowires may be attractive for a variety of applications. - Abstract: Rhenium (Re) is a refractory metal which exhibits an extraordinary combination of properties. Thus, nanowires and other nanostructures of Re-alloys may possess unique properties resulting from both Re chemistry and the nanometer scale, and become attractive for a variety of applications, such as in catalysis, photovoltaic cells, and microelectronics. Rhenium-tin coatings, consisting of nanowires with a core/shell structure, were electrodeposited on copper substrates under galvanostatic or potentiostatic conditions. The effects of bath composition and operating conditions were investigated, and the chemistry and structure of the coatings were studied by a variety of analytical tools. A Re-content as high as 77 at.% or a Faradaic efficiency as high as 46% were attained. Ranges of Sn-to-Re in the plating bath, applied current density and applied potential, within which the nanowires could be formed, were determined. A mechanism was suggested, according to which Sn nanowires were first grown on top of Sn micro-particles, and then the Sn nanowires reduced the perrhenate chemically, thus forming a core made of crystalline Sn-rich phase, and a shell made of amorphous Re-rich phase. The absence of mutual solubility of Re and Sn may be the driving force for this phase separation.

  18. 131I Metaiodobenzylguanidine (131I MIBG) kinetics in a carcinoid tumor

    International Nuclear Information System (INIS)

    Schiavo, R.; Concolino, G.; Fazi, F.; Iannantuono, P.; Voti, S. Li; Manzara, A.; Pavoni, P.

    1987-01-01

    The 131 I-MIBG kinetics was studied in vivo in patients with carcinoid tumors and liver metastases. Activity curve analysis showed that the maximum uptake of 131 I-MIBG in a carcinoid tumor occurred after 48 hours, while its biological half time was of 8 days and a half. Although more data are necessary to understand a significant variation in 131 I-MIBG kinetics between the different kinds of APUD neoplasms, it is thought that a dynamic-funtional study allowing the evaluation of the different biological half-time, could be helpful for the selection of these neoplasms, which could be treated with 131 I-MIBG. Radiation doses required for the treatment are also estimated. (M.E.L.) [es

  19. Malign pheochromocytoma: importance of the scintigraphic follow-up with metaiodobenzulguanidine 131I (MIBG-131I)

    International Nuclear Information System (INIS)

    Kato, M.; Velhote, V.V.; Souto, F.J.P.; Long, Y.J.; Costa, P.L.A.

    1989-01-01

    The authors report a case of pheochromocytoma investigated with metaiodobenzylguanidine labeled with 131 I (MIBG- 131 I). The methodology identify primitive lesion, its recurrence and metastasis. The authors mention the advantage of the technique due to the high specificity, sensitivity and because it is harmless, offering optimal information about the morphology and functional nature, concerning diagnosis and follow-up of the disease. (author) [pt

  20. Colorimetric visualization of tin corrosion: A method for early stage corrosion detection on printed circuit boards

    DEFF Research Database (Denmark)

    Verdingovas, Vadimas; Jellesen, Morten Stendahl; Ambat, Rajan

    2017-01-01

    A majority of printed circuit board surfaces are covered with tin, therefore tin corrosion under humid conditions and movement of tin ions under the influence of an electric field plays an important role in the corrosion failure development. Tracking tin corrosion products spread on the printed c...

  1. The influential factors of 131I treatment for hyperthyroidism

    International Nuclear Information System (INIS)

    Tan Benxu

    2003-01-01

    Many factors such as iodine-131 uptake, effective half-life, thyroid volume, and antithyroid drugs affect the iodine-131 dose for every hyperthyroid patient. The outcome of radioiodine therapy in hyperthyroidism is decided by all of these factors

  2. Aplicaciones clínicas del radioyodo 131 (I131 en las enfermedades del tiroides Clinical applications of radioiodine 131 (I131 in the thyroid diseases

    Directory of Open Access Journals (Sweden)

    Levi González Rivero

    2012-12-01

    Full Text Available El radioyodo 131 es un isótopo radioactivo que se emplea exitosamente en el diagnóstico y tratamiento de las enfermedades benignas y malignas del tiroides. Su propiedad de integrarse selectivamente al metabolismo del tiroides y emitir una señal, le permite describir el funcionamiento glandular mediante estudios de captación, y delimitar la morfología y localización de los tejidos que capten yodo, a través de la gammagrafía. Es además una radioterapia sencilla, segura y coste-efectiva, usada como primera línea terapéutica en el control del hipertiroidismo, cuya dosis y momento de aplicación debería individualizarse según la etiología y la clínica de cada paciente. El radioyodo 131 ofrece una alternativa eficaz para reducir el tamaño del bocio no tóxico; además, respalda el tratamiento quirúrgico del carcinoma diferenciado del tiroides, y destruye a dosis ablativa los restos tisulares y las lesiones metastásicas que puede identificar durante el seguimiento gammagráfico. El empleo de radioyodo 131 está sujeto al cumplimiento de regulaciones de protección contra la radioactividad.Radioiodine 131 is a radioactive isotope that is successfully used for the diagnosis and the treatment of benign and malignant thyroid diseases. Its quality of selectively integrating to the thyroid metabolism and emitting a signal allows it to describe the gland functioning through capture studies, and to delimit the morphology and location of the tissues that capture iodine by means of gammagraphy. It is also a simple, safe and cost-effective radiotherapy used as first-line therapeutics in the control of hyperthyroidism. The dose and right time of application should be individualized according to the etiology and the clinic of each patient. Radioiodine 131 offers an efficient alternative to reduce the size of non-toxic goiter in addition to supporting the surgical treatment of the differentiated thyroid carcinoma and destroying with ablative doses

  3. 46 CFR 131.920 - Level of manning.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Level of manning. 131.920 Section 131.920 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS OPERATIONS Miscellaneous § 131.920 Level of manning. Each vessel must carry the personnel required by the Certificate of...

  4. 46 CFR 131.935 - Prevention of oil pollution.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Prevention of oil pollution. 131.935 Section 131.935... Miscellaneous § 131.935 Prevention of oil pollution. Each vessel must be operated in compliance with— (a) Section 311 of the Federal Water Pollution Control Act, as amended (33 U.S.C. 1321); and (b) 33 CFR parts...

  5. 9 CFR 2.131 - Handling of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling of animals. 2.131 Section 2.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.131 Handling of animals. (a) All licensees who maintain wild...

  6. 36 CFR 406.131-406.139 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false [Reserved] 406.131-406.139 Section 406.131-406.139 Parks, Forests, and Public Property AMERICAN BATTLE MONUMENTS COMMISSION... BATTLE MONUMENTS COMMISSION §§ 406.131-406.139 [Reserved] ...

  7. 11 CFR 100.131 - Testing the waters.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Testing the waters. 100.131 Section 100.131 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Expenditures § 100.131 Testing the waters. (a) General exemption. Payments made solely for the purpose of...

  8. 21 CFR 131.147 - Dry whole milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Dry whole milk. 131.147 Section 131.147 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.147 Dry whole milk. (a...

  9. 21 CFR 131.120 - Sweetened condensed milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Sweetened condensed milk. 131.120 Section 131.120 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.120...

  10. 21 CFR 131.125 - Nonfat dry milk.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Nonfat dry milk. 131.125 Section 131.125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.125 Nonfat dry milk. (a...

  11. 46 CFR 131.575 - Yearly inspections and repair.

    Science.gov (United States)

    2010-10-01

    ... repaired as needed at least once a year. This procedure includes emptying and cleaning each fuel tank and... 46 Shipping 4 2010-10-01 2010-10-01 false Yearly inspections and repair. 131.575 Section 131.575..., Drills, and Inspections § 131.575 Yearly inspections and repair. (a) Each lifeboat, rescue boat, rigid...

  12. 33 CFR 25.131 - Delegation of authority.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Delegation of authority. 25.131 Section 25.131 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL CLAIMS General § 25.131 Delegation of authority. (a) The Chief Counsel is delegated the following authority: (1...

  13. 28 CFR 39.131-39.139 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false [Reserved] 39.131-39.139 Section 39.131-39.139 Judicial Administration DEPARTMENT OF JUSTICE ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE DEPARTMENT OF JUSTICE §§ 39.131-39.139 [Reserved] ...

  14. 46 CFR 131.960 - Use of auto-pilot.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Use of auto-pilot. 131.960 Section 131.960 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS OPERATIONS Miscellaneous § 131.960 Use of auto-pilot. When the automatic pilot is used in areas of high traffic density...

  15. 20 CFR 1001.131 - Secretary's annual report to Congress.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Secretary's annual report to Congress. 1001.131 Section 1001.131 Employees' Benefits OFFICE OF THE ASSISTANT SECRETARY FOR VETERANS' EMPLOYMENT... Compliance § 1001.131 Secretary's annual report to Congress. The Secretary shall report, after the end of...

  16. 46 CFR 131.940 - Marine sanitation device.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Marine sanitation device. 131.940 Section 131.940... Miscellaneous § 131.940 Marine sanitation device. Each vessel with installed toilet facilities must have a marine sanitation device in compliance with 33 CFR part 159. ...

  17. 45 CFR 2490.131-2490.139 - [Reserved

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false [Reserved] 2490.131-2490.139 Section 2490.131-2490.139 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON MEMORIAL... CONDUCTED BY THE JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION §§ 2490.131-2490.139 [Reserved] ...

  18. 47 CFR 87.131 - Power and emissions.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Power and emissions. 87.131 Section 87.131... Technical Requirements § 87.131 Power and emissions. The following table lists authorized emissions and... Authorized emission(s) 9 Maximum power 1 Aeronautical advisory VHF A3E 10 watts. 10 Aeronautical multicom VHF...

  19. 46 CFR 131.420 - Manning and supervision.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Manning and supervision. 131.420 Section 131.420 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS OPERATIONS Sufficiency and Supervision of Crew of Survival Craft § 131.420 Manning and supervision. (a) There must be enough trained persons aboard each survival craf...

  20. Merkel cell carcinoma and iodine-131 metaiodobenzylguanidine scan

    International Nuclear Information System (INIS)

    Castagnoli, A.; Biti, G.; De Cristofaro, M.T.R.; Papi, M.G.; Ferri, P.; Magrini, S.M.; Bianchi, S.

    1992-01-01

    Two cases of Merkel cell carcinoma, a neuroendocrine neoplasia of the skin, investigated with iodine, 131 metaiodobenzylguanidine ( 131 I-mIBG) scintigraphy, are reported. Uptake in the tumor was evident only in 1 case. The possible diagnostic and therapeutic role of 131 I-mIBG in patients with this rare neoplasm is discussed. (orig.)

  1. 49 CFR 28.131 - Illegal use of drugs.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Illegal use of drugs. 28.131 Section 28.131 Transportation Office of the Secretary of Transportation ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE DEPARTMENT OF TRANSPORTATION § 28.131 Illegal use of...

  2. Electrodeposition, characterization and corrosion investigations of galvanic tin-zinc layers from pyrophosphate baths

    OpenAIRE

    STOPIC MILENA D.; FRIEDRICH BERND G.

    2016-01-01

    Tin-zinc alloy deposits are recognized as a potential alternative to toxic cadmium as corrosion resistant coatings. Tin-zinc alloy layers offer outstanding corrosion protection for steel by combining the barrier protection of tin with the galvanic protection of zinc. Tin-zinc coatings have been used on the chassis of electrical and electronic apparatus and on critical automotive parts such as fuel and brake line components. In this study, tin-zinc alloy deposits were successfully prepared fro...

  3. Tin electrodeposition from sulfate solution containing a benzimidazolone derivative

    Directory of Open Access Journals (Sweden)

    Said BAKKALI

    2016-11-01

    Full Text Available Tin electrodeposition in an acidic medium in the presence of N,N’-1,3-bis-[N-3-(6-deoxy-3-O-methyl-D-glucopyranose-6-yl-2-oxobenzimidazol-1-yl]-2-tetradecyloxypropane as an additive was investigated in this work. The adequate current density and the appropriate additive concentration were determined by gravimetric measurements. Chronopotentiometric curves showed that the presence of the additive caused an increase in the overpotential of tin reduction. The investigations by cyclic voltammetry technique revealed that, in the presence and in absence of the additive, there were two peaks, one in the cathodic side attributed to the reduction of Sn2+ and the other one in the anodic side assigned to the oxidation of tin previously formed during the cathodic scan. The surface morphology of the tin deposits was studied by scanning electron microscopy (SEM and XRD.

  4. Tin - an unlikely ally for silicon field effect transistors?

    KAUST Repository

    Hussain, Aftab M.; Fahad, Hossain M.; Singh, Nirpendra; Sevilla, Galo T.; Schwingenschlö gl, Udo; Hussain, Muhammad Mustafa

    2014-01-01

    We explore the effectiveness of tin (Sn), by alloying it with silicon, to use SiSn as a channel material to extend the performance of silicon based complementary metal oxide semiconductors. Our density functional theory based simulation shows

  5. Diffuse scattering in metallic tin polymorphs

    International Nuclear Information System (INIS)

    Wehinger, Björn; Bosak, Alexeï; Piccolboni, Giuseppe; Krisch, Michael; Refson, Keith; Chernyshov, Dmitry; Ivanov, Alexandre; Rumiantsev, Alexander

    2014-01-01

    The lattice dynamics of the metallic tin β and γ polymorphs has been studied by a combination of diffuse scattering, inelastic x-ray scattering and density functional perturbation theory. The non-symmorphic space group of the β -tin structure results in unusual asymmetry of thermal diffuse scattering. Strong resemblance of the diffuse scattering intensity distribution in β and γ-tin were observed, reflecting the structural relationship between the two phases and revealing the qualitative similarity of the underlying electronic potential. The strong influence of the electron subsystem on inter-ionic interactions creates anomalies in the phonon dispersion relations. All observed features are described in great detail by the density functional perturbation theory for both β - and γ-tin at arbitrary momentum transfers. The combined approach delivers thus a complete picture of the lattice dynamics in harmonic description. (paper)

  6. Characterization of tin oxide nanoparticles synthesized via oxidation from metal

    International Nuclear Information System (INIS)

    Abruzzi, R.C.; Dedavid, B.A.; Pires, M.J.R.; Streicher, M.

    2014-01-01

    The tin oxide (SnO_2) is a promising material with great potential for applications such as gas sensors and catalysts. This oxide nanostructures show higher activation efficiency due to its larger effective surface. This paper presents the synthesis and characterization of the tin oxide in different conditions, via oxidation of pure tin with nitric acid. Results obtained from the characterization of SnO_2 powder by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX), Particle size by Dynamic Light Scattering (DLS) and Infrared Spectroscopy (FTIR) indicated that the conditions were suitable for the synthesis to obtain manometric tin oxide granules with crystalline structure of rutile. (author)

  7. A Low Temperature Synthetic Route to Nanocrystalline TiN

    African Journals Online (AJOL)

    NICO

    This method may be extended to the synthesis of other metal nitrides. ... direct current magnetron sputtering17, and mechanical mill- ... recent years, autoclaved synthesis of TiN nanomaterials from ... 3.2 XPS Characterization of the Samples.

  8. Radiosensitizers action on Iodine 131 therapeutical effect

    International Nuclear Information System (INIS)

    Agote, Marcos; Kreimann, Erica L.; Bocanera, Laura V.; Dagrosa, Maria A.; Juvenal, Guillermo J.; Pisarev, Mario A.

    1999-01-01

    Present studies were aimed to research the possible application of a radiosensitizer, nicotinamide, to increase the therapeutical effect of radioiodine. There were used goitrous and normal rats with growing dose of Iodine 131, with and without simultaneous treatment with nicotinamide. The obtained results show that the nicotinamide treatment importantly increases the thyroid radio destructive effect induced by radioiodine. Under these experimental conditions, nicotinamide induces to a significant increase of thyroid vascularisation, without changes in the proteins ADP-ribosylation activity. These results show, for the first time, the radiosensitizer effect of nicotinamide in front of Iodine 131 and give the possibility of using it in the treatment of hyperthyroid or thyroid difference cancer patients. (author)

  9. Decreased uptake after fractionated ablative doses of iodine-131

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hurng-Sheng [Show Chwan Memorial Hospital, Department of Surgery, Changhua, Taiwan (Taiwan); Hseu, Huey-Herng [Taichung Veterans General Hospital, Department of Medical Education and Research, Taichung (Taiwan); Lin, Wan-Yu; Wang, Shyh-Jen [Taichung Veterans General Hospital, Department of Nuclear Medicine, Taichung, Taiwan (Taiwan); Liu, Yao-Chi [Department of Surgery, General Surgery, National Defense Medical Center, Taipe (Taiwan)

    2005-02-01

    In an attempt to obviate the necessity for hospitalisation, the ablative dose of {sup 131}I in the treatment of thyroid cancer is divided into two or three fractions at weekly intervals in some hospitals with no special bed for {sup 131}I treatment. Thyroid stunning has been observed in patients receiving a {sup 131}I dose between 74 and 370 MBq (2-10 mCi). However, the influence of {sup 131}I uptake after administration of a higher dose, such as 1,110-1,850 MBq of {sup 131}I, has never been reported. In this study, we evaluated the degree of reduction in {sup 131}I uptake after patients received 1,480 MBq of {sup 131}I and evaluated the clinical value of fractionated ablative doses of {sup 131}I. Thirty-five patients with functional thyroid cancer received a total of 4,440 MBq (120 mCi) of {sup 131}I which was divided into three fractions administered at weekly intervals. In all patients two {sup 131}I whole-body scans were performed. The first scan was performed directly prior to the second dose of {sup 131}I (7 days after the first administration of {sup 131}I), and the second scan was performed 7 days after the second administration of {sup 131}I and directly prior to the third administration. Regions of interest including the neck and lungs were drawn to calculate the uptake of {sup 131}I in the thyroid remnant and possible cervical lymph node and lung metastases. The mean uptake of {sup 131}I was 2.73% 7 days after the first administration, and decreased significantly to 0.26% 7 days after the second administration. The mean decrease was as high as 80.7%. The decrease in {sup 131}I uptake was significant in all patients except the two with lung metastases. In the two patients with lung metastases, no definite evidence of decreased uptake was noted; the uptake of {sup 131}I in the lung metastases even increased on the second {sup 131}I image in one of these patients. After administration of 1,480 MBq of {sup 131}I, the decreased uptake was significant in all

  10. In vivo biological evaluation of 131I radiolabeled-paclitaxel glucuronide (131I-PAC-G)

    International Nuclear Information System (INIS)

    Aslan, O.; Biber Muftuler, F.Z.; Yurt Kilcar, A.; Ichedef, C.; Unak, P.

    2012-01-01

    Paclitaxel (PAC) is a natural occurring diterpene alkoloid originally isolated from the bark of Taxus Brevifolia. It is one of the most important antitumor agents for clinical treatment of ovarian, breast non-small cell lung and prostate cancers. It is known that these types of cancer cells have high β-glucuronidase enzyme which can catalyze the hydrolysis of glucuronides. This is why the synthesis compounds which undergo glucuronidation come into question in the imaging and therapy of these cancer cells. The aim of current study is conjugation of glucuronic acid (G) to the starting substance PAC, labeling with 131 I and to perform its in vivo biological evaluation. Glucuronic acid derived paclitaxel compound [paclitaxel-glucuronide (PAC-G)] was labeled with 131 I using iodogen method. According to thin layer radio chromatography (TLRC) method, the radiochemical yield of 131 I-PAC-G was 84.30 ± 7.40% (n=10). The biodistribution of 131 I-PAC-G in healthy female and male Wistar Albino rats has been investigated. Imaging studies on male Balb-C mice were performed by using the Kodak FX PRO in vivo Imaging System. The range of the breast/blood, breast/muscle; ovary/blood, ovary/muscle ratios is approximately between 1.29 and 11.34 in 240 min, and between 0.71 and 8.24 in 240 min for female rats. The prostate/blood and prostate/muscle ratio is between 1.94 and 6.95 in 30 min for male rats. All these experimental studies indicate that 131 I-PAC-G may potentially be used in breast, ovary and prostate tissues as an imaging agent. Also it is thought that 131 I-PAC-G bears a therapy potential because of the 131 I radionuclide and can be improved with further investigations. (orig.)

  11. 131I-MIBG and neuroendocrine tumours

    International Nuclear Information System (INIS)

    Oliva Gonzalez, Juan Perfecto; Gonzalez Gonzalez, Joaquin Jorge; Calderon Marin, Carlos Fabian

    2012-01-01

    Neuroendocrine tumours are neoplasms that arise from various tissues closely linked to the neural crest by their common embryological origin. These tumours have the ability to synthesize neurotransmitter peptides and hormones, as well as to store catecholamines. Some of these tumours express somatostatin receptors at their membranes, what have allowed nuclear medicine to be involved in their diagnosis, treatment and monitoring. Since they arise from different and varied types of tissues, these tumours have a wide range of signs and symptoms different for every one of them. These signs and symptoms mainly depend on their biochemical characteristics, given by the substances they secrete, as well as by their location, and consequently, they also depend on the place where the tumour appears, its local infiltration, and potential long-distance metastasis resulting from the tumour). Neuroendocrine tumours are diagnosed by means of nuclear medicine images, which are obtained by using different techniques and radiopharmaceuticals such as 99 mTc dimercaptosuccinic acid (DMSA(V)), 99 mTc-methoxy-isobutyl-isonitrile (MIBI), metaiodobenzylguanidine (MIBG) labelled with 131 I or 123 I ( 131 I-MIBG or 123 I -MIBG), 111 In-labelled octreotide, positron emission tomography, using 68 Ga-labelled somatostatin analogues and carcinoembryonic antigen monoclonal antibodies. Nuclear medicine uses mainly somatostatin analogues labelled with 90 Y or 177 Lu for the treatment of these tumours. This paper is aimed at showing our experience in the use of 131 I-MIBG for the diagnosis and treatment of neuroendocrine tumours.(author)

  12. Thyroid cancer following diagnostic iodine-131 administration

    International Nuclear Information System (INIS)

    Hall, P.; Holm, L.-E.; Boice, J.D.

    1996-01-01

    To provide quantitative data on the risk of thyroid cancer following 131 I exposure, 34104 patients administered 131 I for diagnostic purposes were followed for up to 40 years. Mean thyroid dose was estimated as 1.1 Gy, and 67 thyroid cancers occurred in contrast to 49.7 expected [standardized incidence ratio (SIR)=1.35; 95% confidence interval (CI) 1.05-1.71]. Excess cancers were apparent only among patients referred because of a suspected thyroid tumor and no increased risk was seen among those referred for other reasons. Further, risk was not related to radiation dose to the thyroid gland, time since exposure, or age at exposure. The slight excess of thyroid cancer, then appeared due to the underlying thyroid condition and not radiation exposure. Among those under age 20 years when 131 I was administered, a small excess risk (3 cancers vs 1.8 expected) was about 2-10 times lower than that predicted from A-bomb data. These data suggest that protraction of dose may result in a lower risk than acute x-ray exposure of the same total dose

  13. Determination of I-131 in milk samples

    International Nuclear Information System (INIS)

    Fernandez G, I.; Rodriguez C, G.; Quevedo A, J. L.

    1996-01-01

    In our country, in the near future, an isotope center will be in operation, and due to its characteristics, it is possible the discharge of radionuclides to the atmosphere during its normal exploitation, as well as in case of accident. Considering the kind and the concentration of the radioactive material released to the atmosphere, the possible ways of contamination were determined, playing the milk the most significant role, because the Iodine-131 is in the radionuclide inventory of this center, being possible to pass to the food-chain soil-grass-milk, due to the fact that the center is located in a cattle zone. Owing to these facts, it is necessary to rely on a method for determining Iodine-131 that allows to control its presence in milk samples, when the isotope center start to operate. The direct absorption of Iodine-131 in an anionic exchange resin and the subsequent analysis of this resin for gamma spectrometry with a Nal (Tl) detector is a cheap, simple and fast method with a recovery average greater than the 95%. (authors). 5 refs., 3 tabs

  14. Studies in group IV organometallic chemistry XXX. Synthesis of compounds containing tin---titanium and tin---zirconium bonds

    NARCIS (Netherlands)

    Creemers, H.M.J.C.; Verbeek, F.; Noltes, J.G.

    1968-01-01

    Starting from the tetrakis(diethylamino) derivatives of titanium and zirconium and pheyltin hydrides six intermetalic compounds contianing up to nine tin and titanium(or zirconium) atoms have been obtained by hydrostannolysis type reactions.

  15. Analysis of 131I therapy in 71 patients with hyperthyroidism

    International Nuclear Information System (INIS)

    Wang Ping; Chen Zequan; Wang Yuanzhi; Ye Shiqing

    2001-01-01

    Objective: To evaluate the clinical significance of iodine-131 treatment in patients with hyperthyroidism. Methods: The dose of 131 I was determined according to thyroid absorption of 131 I at 24 hrs post administration and thyroid weight estimated in ECT examination. Results: One dose cure rate of 131 I treatment was 96% (68/71). Hypothyroidism occurred in 3 of 71 patients (4%) in one year after administration. No other serious complication was observed. Conclusion: The therapeutic effect of 131 I in treating hyperthyroidism was quite encouraging. The administration regime was also simple

  16. Sodium Iodide-131 (Na131I) AS Gelatin Capsules At TNRC-In Libya

    International Nuclear Information System (INIS)

    Sherief, M. F.; Abudeeb, F. N.; Abudaia, J. A.; Elghanoudy, Y. A.

    2004-01-01

    In this contribution, the production of a capsulated Na 131 I radiopharmaceutical, for treatment of variety of hyperthyroidism diseases, at Tajoura Nuclear Research Center in Tripoli-Libya is described. The process requires the application of a very small volume of iodine-131 (not more than 25μ l in some cases) with radioactivities reaching some 37 GBq per capsule. The application of such volume is necessary to prevent damage to gelatin material. Loading a volume of 100 μ l of radioactive Na 131 I solution containing 37 GBq. radioactivity within a capsule filled with anhydrous sodium hydrogen phosphate as an adsorption material for Na 131 I solution brings such solution into a direct interaction with the gelatin material. This is assumed to have an inadequate effect in therapy. To overcome this problem, the work team has introduced some substantial alterations on the irradiation procedure and the process of the pre-irradiation treatment of the target. As a consequence, that has successfully culminated in production of Na 131 I capsules with proper perspective (e.g. radioactive yield of 74 GBq from 37 GBq previously and radioactive concentration of 37 GBq/ml). (Authors)

  17. Precipitation in a lead calcium tin anode

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Gonzalez, Francisco A., E-mail: fco.aurelio@inbox.com [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon (Mexico); Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, Universidad Autonoma de Nuevo Leon (Mexico); Camurri, Carlos G., E-mail: ccamurri@udec.cl [Departamento de Ingenieria de Materiales, Universidad de Concepcion (Chile); Carrasco, Claudia A., E-mail: ccarrascoc@udec.cl [Departamento de Ingenieria de Materiales, Universidad de Concepcion (Chile); Colas, Rafael, E-mail: rafael.colas@uanl.edu.mx [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon (Mexico); Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, Universidad Autonoma de Nuevo Leon (Mexico)

    2012-02-15

    Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 Degree-Sign C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn{sub 3} particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitates and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: Black-Right-Pointing-Pointer The distance between precipitates in a lead alloy is recorded. Black-Right-Pointing-Pointer The relationship between the distance and the cooling rate is established. Black-Right-Pointing-Pointer It is found that the strengthening of the alloy depends on the distance between precipitates.

  18. Precipitation in a lead calcium tin anode

    International Nuclear Information System (INIS)

    Pérez-González, Francisco A.; Camurri, Carlos G.; Carrasco, Claudia A.; Colás, Rafael

    2012-01-01

    Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 °C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn 3 particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitates and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: ► The distance between precipitates in a lead alloy is recorded. ► The relationship between the distance and the cooling rate is established. ► It is found that the strengthening of the alloy depends on the distance between precipitates.

  19. Liquid tin limiter for FTU tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Vertkov, A., E-mail: avertkov@yandex.ru [JSC “Red Star”, Moscow (Russian Federation); Lyublinski, I. [JSC “Red Star”, Moscow (Russian Federation); NRNU MEPhI, Moscow (Russian Federation); Zharkov, M. [JSC “Red Star”, Moscow (Russian Federation); Mazzitelli, G.; Apicella, M.L.; Iafrati, M. [Associazione EURATOM-ENEA sulla Fusione, C. R. Frascati, Frascati, Rome, Italy, (Italy)

    2017-04-15

    Highlights: • First steady state operating liquid tin limiter TLL is under study on FTU tokamak. • The cooling system with water spray coolant for TLL has been developed and tested. • High corrosion resistance of W and Mo in molten Sn confirmed up to 1000 °C. • Wetting process with Sn has been developed for Mo and W. - Abstract: The liquid Sn in a matrix of Capillary Porous System (CPS) has a high potential as plasma facing material in steady state operating fusion reactor owing to its physicochemical properties. However, up to now it has no experimental confirmation in tokamak conditions. First steady state operating limiter based on the CPS with liquid Sn installed on FTU tokamak and its experimental study is in progress. Several aspects of the design, structural materials and operation parameters of limiter based on tungsten CPS with liquid Sn are considered. Results of investigation of corrosion resistance of Mo and W in Sn and their wetting process are presented. The heat removal for limiter steady state operation is provided by evaporation of flowing gaswater spray. The effectiveness of such heat removal system is confirmed in modelling tests with power flux up to 5 MW/m2.

  20. Tin( ii ) ketoacidoximates: synthesis, X-ray structures and processing to tin( ii ) oxide

    KAUST Repository

    Khanderi, Jayaprakash

    2015-10-21

    Tin(ii) ketoacidoximates of the type [HONCRCOO]Sn (R = Me 1, CHPh 2) and (MeONCMeCOO)Sn] NH·2HO 3 were synthesized by reacting pyruvate- and hydroxyl- or methoxylamine RONH (R = H, Me) with tin(ii) chloride dihydrate SnCl·2HO. The single crystal X-ray structure reveals that the geometry at the Sn atom is trigonal bipyramidal in 1, 2 and trigonal pyramidal in 3. Inter- or intramolecular hydrogen bonding is observed in 1-3. Thermogravimetric (TG) analysis shows that the decomposition of 1-3 to SnO occurs at ca. 160 °C. The evolved gas analysis during TG indicates complete loss of the oximato ligand in one step for 1 whereas a small organic residue is additionally removed at temperatures >400 °C for 2. Above 140 °C, [HONC(Me)COO]Sn (1) decomposes in air to spherical SnO particles of size 10-500 nm. Spin coating of 1 on Si or a glass substrate followed by heating at 200 °C results in a uniform film of SnO. The band gap of the produced SnO film and nanomaterial was determined by diffuse reflectance spectroscopy to be in the range of 3.0-3.3 eV. X-ray photoelectron spectroscopy indicates surface oxidation of the SnO film to SnO in ambient atmosphere.

  1. Determination of inorganic radioiodine in 131I- Rose Bengal and 131I- bromosulphthalein

    International Nuclear Information System (INIS)

    Toledo e Souza, I.T. de; Pereira, N.P.S. de; Silva, C.P.G. da.

    1985-01-01

    A rapid miniaturized chromatographic system was developed for fast determination of the proportion of inorganic radioactive iodide from radiopharmaceuticals 131 I-Rose Bengal and 131 I-Bromosulphthalein. Using 33% W/V aqueous solution of ammonium sulphate pH 7,5 as a solvent Rf values for radiopharmaceuticals, iodide, iodate to Rf 0,0 0,5 0,9 respectively. The chromatographic quality control procedures are easy to use, rapid and can be incorporated in a routine quality control program. (Author) [pt

  2. Treatments of hyperthyroidism with iodine-131

    International Nuclear Information System (INIS)

    Kuniyasu, Yoshio

    1978-01-01

    The results of treatment 131 I were reported, and hypothyroidism as a late disturbance was described. The therapeutic results of a standard dose of 6000 rad and the incidence of hypothyroidism were discussed. Of the 117 patients followed up (80% were 21-50 years of age, and 30% were followed up for more than 10 years), 98 (83.8%) were euthyroid (cured), and 19 (16.2%) had hypothyroidism. Hypothyroidism occurred 6 months and 2 years later in one case each, 5 years later in 9, and more than 10 years later in 6; the onset increased with increasing years. Sixty patients (55%) were cured by the first treatment, and 36 were relieved by the second a total of 96 patients (87.2%) were relieved by two irradiations. Of all hypothyroidism was observed in 12 patients (10%). The incidence of hypothyroidism increased among the patients given more than 3 irradiations. There was no significant difference in the incidence of hypothyroidism between single 131 I treatment and 131 I treatment following the internal use of antithyroid drugs. Hypothyroidism did not occur in cases given less than 5000 rad, but occurred in 8.5% of those given 5000-10000 rad and 18.9% of those given 10000-15000 rad. With a standard dose of 6000 rad, 109 (82%) of the 133 patients followed up for less than 4 years were relieved or cured; hypothyroidism appeared in 13 cases (9.8%) including transient one immediately after recovery and this result is less satisfactory than that obtained with 9000 rad previously. (Chiba, M.)

  3. Adrenal scintigraphy using 131I-Adosterol

    International Nuclear Information System (INIS)

    Fukunaga, Masao; Dokoh, Shigeharu; Yamamoto, Itsuo; Morita, Rikushi; Torizuka, Kanji

    1977-01-01

    131 I-Adosterol (6β-iodomethyl-19-norcholest-5(10)-3β-ol) was administered to evaluate adrenal grand in 20 patients including 9 patients with primary aldosteronism, 5 with Cushing's syndrome, one with pheochromocytoma, one with retroperitoneal tumor, 3 with essential hypertension and one with obesity. Standard scintigraphies were performed at 3rd day and again 6th day after administration of 131 I-adosterol (1-1.5 mCi). Suppression scintigraphies were obtained while the patients were taking dexamethasone 2 to 3 mg daily from 3 days prior to injection of the tracer until adrenal imaging. In the cases with essential hypertension and obesity, both adrenal glands were delineated equally by standard scintigraphy, and in one patient, undergone suppression scintigraphy, the uptake of 131 I-adosterol by both glands were completely inhibited by dexamethasone administration. In primary aldosteronism, six of the 9 patients demonstrated the increased radioactivity in one side, and were diagnosed as aldosteronoma. In 3 cases, failed to show the lesions on standard scintigraphy, the lesions could be detected by suppression scintigraphy, and aldosteronomas measuring 1 x 1 x 0.7, 2 x 2 x 1 and 1.7 x 1.5 x 0.8 cm were confirmed by operation. In Cushing's syndrome, standard scintigraphy could easily distinguish between adenoma (one case) and bilateral hyperplasia (4 cases). Adrenal scintigraphy was also a useful method in order to assess the effect of pituitary irradiation therapy in the case of hyperplasia. In pheochromocytoma and retroperitoneal tumor, the side of the lesion was identified by the absence of a functioning gland. Suppression scintigraphy was particularly useful in detecting the localization of the small tumor in primary aldosteronism. (auth.)

  4. Iodine-131 monitoring in sewage plant outflow

    International Nuclear Information System (INIS)

    McGowan, D R; Crawley, M T; Pratt, B E; Hinton, P J; Peet, D J

    2014-01-01

    Three different hospital sites (Oxford, Sutton and Guildford) have performed sampling of their local sewage plant outflow to determine levels of radioactivity resulting from iodine-131 patients undergoing radionuclide therapies. It was found that a maximum of 20% of activity discharged from the hospitals was present in the sewage plant final effluent channel. This is significantly below the level predicted by mathematical models in current use. The results further show that abatement systems to reduce public exposure are unlikely to be warranted at hospital sites. (paper)

  5. /sup 131/I studies in pulmonary tuberculosis

    Energy Technology Data Exchange (ETDEWEB)

    Yedurappa, K G [K.M. Coll., Hubli (India)

    1975-02-01

    The increased I/sup 131/ uptake in the untreated tuberculous patients is probably due to the complex changes in the entire body metabolic processes as a result of tuberculous infection but not due to thyroid function disorder. Prolonged administration of isoniazid and PAS may depress thyroid hormones production with or without signs of goiter or hypothyroidism when these drugs are commonly used in the treatment of tuberculosis. The blocking effect of INAH and PAS might be in the iodine binding capacity rather than iodide concentrating mechanism.

  6. FUN3D Manual: 13.1

    Science.gov (United States)

    Biedron, Robert T.; Carlson, Jan-Renee; Derlaga, Joseph M.; Gnoffo, Peter A.; Hammond, Dana P.; Jones, William T.; Kleb, Bil; Lee-Rausch, Elizabeth M.; Nielsen, Eric J.; Park, Michael A.; hide

    2017-01-01

    This manual describes the installation and execution of FUN3D version 13.1, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

  7. Selective Recovery of Mushistonite from Gravity Tailings of Copper–Tin Minerals in Tajikistan

    OpenAIRE

    Lei Sun; Yuehua Hu; Wei Sun; Zhiyong Gao; Mengjie Tian

    2017-01-01

    Tajikistan has abundant copper–tin resources. In this study, mineralogical analysis of copper–tin ores from the Mushiston deposit of Tajikistan indicates that tin mainly occurred in mushistonite, cassiterite, and stannite, while copper mainly occurred in mushistonite, malachite, azurite, and stannite. The total grades of tin (Sn) and copper (Cu) were 0.65% and 0.66%, respectively, and the dissemination size of copper–tin minerals ranged from 4 μm to over 200 μm. Coarse particles of copper–tin...

  8. Investigation of Surface Phenomena in Shocked Tin in Converging Geometry

    Energy Technology Data Exchange (ETDEWEB)

    Rousculp, Christopher L. [Los Alamos National Laboratory; Oro, David Michael [Los Alamos National Laboratory; Griego, Jeffrey Randall [Los Alamos National Laboratory; Turchi, Peter John [Los Alamos National Laboratory; Reinovsky, Robert Emil [Los Alamos National Laboratory; Bradley, Joseph Thomas [Los Alamos National Laboratory; Cheng, Baolian [Los Alamos National Laboratory; Freeman, Matthew Stouten [Los Alamos National Laboratory; Patten, Austin Randall [Los Alamos National Laboratory

    2016-03-21

    There is great interest in the behavior of the free surface of tin under shock loading. While it is known that meso-scale surface imperfections can seed the Richtmyer- Meshkov Instability (RMI) for a surface that is melted on release, much less is known about a tin surface that is solid, but plastically deforming. Here material properties such as shear and yield strength come into play especially in converging geometry. Previous experiments have been driven by direct contact HE. Usually a thin, flat target coupon is fielded with various single-mode, sinusoidal, machined, profiles on the free surface. The free surface is adjacent to either vacuum or an inert receiver gas. Most of these previous driver/target configurations have been nominal planer geometry. With modern HE it has been straightforward to shock tin into melt on release. However it has been challenging to achieve a low enough pressure for solid state on release. Here we propose to extend the existing base of knowledge to include the behavior of the free surface of tin in cylindrical converging geometry. By shock loading a cylindrical tin shell with a magnetically driven cylindrical liner impactor, the free surface evolution can be diagnosed with proton radiography. With the PHELIX capacitor bank, the drive can easily be varied to span the pressure range to achieve solid, mixed, and liquid states on release. A conceptual cylindrical liner and target is shown in Figure 1.

  9. Synthesis, characterization and photoluminescence of tin oxide nanoribbons and nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Duraia, El-Shazly M.A., E-mail: duraia_physics@yahoo.co [Suez Canal University, Faculty of Science, Physics Department, Ismailia (Egypt); Al-Farabi Kazakh National University, Almaty (Kazakhstan); Institute of Physics and Technology, 11 Ibragimov Street, 050032 Almaty (Kazakhstan); Mansorov, Z.A. [Al-Farabi Kazakh National University, Almaty (Kazakhstan); Tokmolden, S. [Institute of Physics and Technology, 11 Ibragimov Street, 050032 Almaty (Kazakhstan)

    2009-11-15

    In this work we report the successful formation of tin oxide nanowires and tin oxide nanoribbons with high yield and by using simple cheap method. We also report the formation of curved nanoribbon, wedge-like tin oxide nanowires and star-like nanowires. The growth mechanism of these structures has been studied. Scanning electron microscope was used in the analysis and the EDX analysis showed that our samples is purely Sn and O with ratio 1:2. X-ray analysis was also used in the characterization of the tin oxide nanowire and showed the high crystallinity of our nanowires. The mechanism of the growth of our1D nanostructures is closely related to the vapor-liquid-solid (VLS) process. The photoluminescence PL measurements for the tin oxide nanowires indicated that there are three stable emission peaks centered at wavelengths 630, 565 and 395 nm. The nature of the transition may be attributed to nanocrystals inside the nanobelts or to Sn or O vacancies occurring during the growth which can induce trapped states in the band gap.

  10. Methodology to administer therapeutic dose of I-131; Metodologia para administrar dosis terapeutica de I-131

    Energy Technology Data Exchange (ETDEWEB)

    Basteris M, J.; Gomez D, R. [Universidad Autonoma de Yucatan, Facultad de Medicina, Merida, Yucatan (Mexico)

    2007-07-01

    The present work suggests the use of measures guided to eliminate the resulting chronic sialoadenitis of the treatment of the thyroid cancer with Iodine-131, as well as the use of citric fruits to stimulate the salivation, the post-dose administration of liquids to accelerate the gastric emptying avoiding the secondary effects as the vomit is included. (Author)

  11. Radiation exposure in I-131 iodine therapy

    International Nuclear Information System (INIS)

    Friedrich, W.

    1985-01-01

    In the past five years, the applied I-131 radioactivity quantity has doubled with a constant number of beds. In 1984, it was 925 GBq (25 Ci). Despite this development, no changes in the professional radiation exposure were made out. The evaluation shows a dose smaller than 0.04 man Sv/TBq (0.16 man rem/Ci) of I-131 applied. This value is below the traceability limit of the film badges. The incorporation load of the personnel (27 members) was determined by monthly body counter measurements. Only in one measurement thyroid gland activity of 5 kBq (140 nCi) was detected. Most measurements did not show any incorporation; and the few positive results were below 0.74 kBq (20 nCi). The environmental load due to unfiltered release from patients' rooms was determined at the fence of the nuclear research plant. The maximum was 0.24 mSv/a thyroid gland dose of a small child in 1982 taking into account the measured 90% partion of organic compound iodine. The waste water is decayed following chemical treatment in storage tanks. (orig./HP) [de

  12. Strategies to Reduce Tin and Other Metals in Electronic Cigarette Aerosol.

    Directory of Open Access Journals (Sweden)

    Monique Williams

    Full Text Available Metals are present in electronic cigarette (EC fluid and aerosol and may present health risks to users.The objective of this study was to measure the amounts of tin, copper, zinc, silver, nickel and chromium in the aerosol from four brands of EC and to identify the sources of these metals by examining the elemental composition of the atomizer components.Four brands of popular EC were dissected and the cartomizers were examined microscopically. Elemental composition of cartomizer components was determined using integrated energy dispersive X-ray microanalysis, and the concentrations of the tin, copper, zinc silver, nickel, and chromium in the aerosol were determined for each brand using inductively coupled plasma optical emission spectroscopy.All filaments were made of nickel and chromium. Thick wires were copper coated with either tin or silver. Wires were joined to each other by tin solder, brazing, or by brass clamps. High concentrations of tin were detected in the aerosol when tin solder joints were friable. Tin coating on copper wires also contributed to tin in the aerosol.Tin concentrations in EC aerosols varied both within and between brands. Tin in aerosol was reduced by coating the thick wire with silver rather than tin, placing stable tin solder joints outside the atomizing chamber, joining wires with brass clamps or by brazing rather than soldering wires. These data demonstrate the feasibility of removing tin and other unwanted metals from EC aerosol by altering designs and using materials of suitable quality.

  13. Strategies to Reduce Tin and Other Metals in Electronic Cigarette Aerosol

    Science.gov (United States)

    Williams, Monique; To, An; Bozhilov, Krassimir; Talbot, Prue

    2015-01-01

    Background Metals are present in electronic cigarette (EC) fluid and aerosol and may present health risks to users. Objective The objective of this study was to measure the amounts of tin, copper, zinc, silver, nickel and chromium in the aerosol from four brands of EC and to identify the sources of these metals by examining the elemental composition of the atomizer components. Methods Four brands of popular EC were dissected and the cartomizers were examined microscopically. Elemental composition of cartomizer components was determined using integrated energy dispersive X-ray microanalysis, and the concentrations of the tin, copper, zinc silver, nickel, and chromium in the aerosol were determined for each brand using inductively coupled plasma optical emission spectroscopy. Results All filaments were made of nickel and chromium. Thick wires were copper coated with either tin or silver. Wires were joined to each other by tin solder, brazing, or by brass clamps. High concentrations of tin were detected in the aerosol when tin solder joints were friable. Tin coating on copper wires also contributed to tin in the aerosol. Conclusions Tin concentrations in EC aerosols varied both within and between brands. Tin in aerosol was reduced by coating the thick wire with silver rather than tin, placing stable tin solder joints outside the atomizing chamber, joining wires with brass clamps or by brazing rather than soldering wires. These data demonstrate the feasibility of removing tin and other unwanted metals from EC aerosol by altering designs and using materials of suitable quality. PMID:26406602

  14. Cyclic voltammetric study of tin hexacyanoferrate for aqueous battery applications

    Directory of Open Access Journals (Sweden)

    Denys Gromadskyi

    2016-09-01

    Full Text Available A hybrid composite containing 65 mass % of tin hexacyanoferrate mixed with 35 mass % of carbon nanotubes has been synthesized and its electrochemical behavior as a negative electrode in alkali metal-ion batteries has been studied in 1 mol L-1 aqueous solution of sodium sulfate. The specific capacity of pure tin hexacyanoferrate is 58 mAh g-1, whereas the specific capacity normalized per total electrode mass of the composite studied reaches 34 mAh g-1. The estimated maximal specific power of an aqueous alkali-metal ion battery with a tin hexacyanoferrate electrode is ca. 3.6 kW kg-1 being comparable to characteristics of industrial electric double-layer capacitors. The maximal specific energy accumulated by this battery may reach 25.6 Wh kg-1 at least three times exceeding the specific energy for supercapacitors.

  15. Vanadocene reactions with mixed acylates of silicon, germanium and tin

    International Nuclear Information System (INIS)

    Latyaeva, V.N.; Lineva, A.N.; Zimina, S.V.; Gordetsov, A.S.; Dergunov, Yu.I.

    1981-01-01

    Vanadocene interaction with di-and tri-alkyl (aryl)-derivatives of silicon, tin and germanium is studied. Dibutyltin dibenzoate under mild conditions (20 deg C, toluene) oxidates vanadocene to [CpV(OCOC 6 H 5 ) 2 ] 2 , at that, the splitting off of one Cp group in the form of cyclopentadiene and formation of the products of tin-organic fragment disproportionation (tributyltin benzoate, dibutyltin, metallic tin) take place. Tributyltin benzoate oxidates vanadocene at the mole ratio 2:1 and during prolong heating (120 deg C) in the absence of the solvent, [CpV(OCOC 6 H 5 ) 2 ] 2 and hexabutyldistannate are the products of the reaction. Acetates R 3 SnOCOCH 3 react in the similar way. The reactivity of mono- and diacylates of germanium and silicon decreases in the series of derivatives Sn>Ge>Si [ru

  16. Tin - an unlikely ally for silicon field effect transistors?

    KAUST Repository

    Hussain, Aftab M.

    2014-01-13

    We explore the effectiveness of tin (Sn), by alloying it with silicon, to use SiSn as a channel material to extend the performance of silicon based complementary metal oxide semiconductors. Our density functional theory based simulation shows that incorporation of tin reduces the band gap of Si(Sn). We fabricated our device with SiSn channel material using a low cost and scalable thermal diffusion process of tin into silicon. Our high-κ/metal gate based multi-gate-field-effect-transistors using SiSn as channel material show performance enhancement, which is in accordance with the theoretical analysis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Properties of Polydisperse Tin-doped Dysprosium and Indium Oxides

    Directory of Open Access Journals (Sweden)

    Malinovskaya Tatyana

    2017-01-01

    Full Text Available The results of investigations of the complex permittivity, diffuse-reflectance, and characteristics of crystal lattices of tin-doped indium and dysprosium oxides are presented. Using the methods of spectroscopy and X-ray diffraction analysis, it is shown that doping of indium oxide with tin results in a significant increase of the components of the indium oxide complex permittivity and an appearance of the plasma resonance in its diffuse-reflectance spectra. This indicates the appearance of charge carriers with the concentration of more than 1021 cm−3 in the materials. On the other hand, doping of the dysprosium oxide with the same amount of tin has no effect on its optical and electromagnetic properties.

  18. Trace hydrogen extraction from liquid lithium tin alloy

    International Nuclear Information System (INIS)

    Xie Bo; Hu Rui; Xie Shuxian; Weng Kuiping

    2010-01-01

    In order to finish the design of tritium extraction system (TES) of fusion fission hybrid reactor (FFHR) tritium blanket, involving the dynamic mathematical model of liquid metal in contact with a gaseous atmosphere, approximate mathematical equation of tritium in lithium tin alloy was deduced. Moreover, carrying process used for trace hydrogen extraction from liquid lithium tin alloy was investigated with hydrogen being used to simulate tritium in the study. The study results indicate that carrying process is effective way for hydrogen extraction from liquid lithium tin alloy, and the best flow velocity of carrier gas is about 4 L/min under 1 kg alloy temperatures and carrying numbers are the main influencing factors of hydrogen number. Hydrogen extraction efficiency can reach 85% while the alloy sample is treated 6 times at 823 K. (authors)

  19. Recovery of antimony-125 from tin-124 irradiated by neutrons

    International Nuclear Information System (INIS)

    Baluev, A.V.; Mityakhina, V.S.; Krasnikov, L.V.; Galkin, B.Ya.; Besnosyuk, V.I.

    2003-01-01

    Separation of 125 Sb from tin using highly basic, medium-basic, and weakly basic ion-exchangers was studied. The best results were obtained for AN-31 weakly basic anion exchanger. The yield of 125 Sb was 95 -98 % of the initial activity, the yield of tin, 98 ± 0.5% of the initial amount. The separation coefficient is 10 6 -10 7 for one cycle. A procedure based on ion exchange was developed. Extraction procedures of separation of 125 Sb from tin were studied. Isoamyl alcohol, ethyl acetate, and di-n-butyl ether were used as extracting agents. The most efficient extracting agent is di-n-butyl ether. Carrier-free radiochemically pure sample of 125 Sb was produced. More than 20 mCi of the target product was recovered. The extraction recovery procedure of 125 Sb has been developed. (author)

  20. Low-temperature Synthesis of Tin(II) Oxide From Tin(II) ketoacidoximate Precursor

    KAUST Repository

    Alshankiti, Buthainah

    2015-04-01

    Sn (II) oxide finds numerous applications in different fields such as thin film transistors1, solar cells2 and sensors.3 In this study we present the fabrication of tin monoxide SnO by using Sn (II) ketoacid oximate complexes as precursors. Tin (II) ketoacidoximates of the type [HON=CRCOO]2Sn where R= Me 1, R= CH2Ph 2, and [(MeON=CMeCOO)3Sn]- NH4 +.2H2O 3 were synthesized by in situ formation of the ketoacid oximate ligand. The crystal structures were determined via single crystal X- ray diffraction of the complexes 1-3 revealed square planar and square pyramidal coordination environments for the Sn atom. Intramolecular hydrogen bonding is observed in all the complexes. Furthermore, the complexes were characterized by Infrared (IR), Nuclear Magnetic Resonance (NMR) and elemental analysis. From thermogravimetric analysis of 1-3, it was found that the complexes decomposed in the range of 160 – 165 oC. Analysis of the gases evolved during decomposition indicated complete loss of the oximato ligand in one step and the formation of SnO. Spin coating of 1 on silicon or glass substrate show uniform coating of SnO. Band gaps of SnO films were measured and found to be in the range of 3.0 – 3.3 eV by UV-Vis spectroscopy. X-ray photoelectron spectroscopy indicated surface oxidation of the SnO film. Heating 1 above 140 oC in air gives SnO of size ranging from 10 – 500 nm and is spherical in shape. The SnO nanomaterial is characterized by powder X-ray diffraction(XRD), Raman spectroscopy, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM).

  1. Electrical Properties of Electrospun Sb-Doped Tin Oxide Nanofibers

    International Nuclear Information System (INIS)

    Leon-Brito, Neliza; Melendez, Anamaris; Ramos, Idalia; Pinto, Nicholas J; Santiago-Aviles, Jorge J

    2007-01-01

    Transparent and conducting tin oxide fibers are of considerable interest for solar energy conversion, sensors and in various electrode applications. Appropriate doping can further enhance the conductivity of the fibers without loosing optical transparency. Undoped and antimony-doped tin oxide fibers have been synthesized by our group in previous work using electrospinning and metallorganic decomposition techniques. The undoped tin oxide fibers were obtained using a mixture of pure tin oxide sol made from tin (IV) chloride : water : propanol : isopropanol at a molar ratio of 1:9:9:6, and a viscous solution made from poly(ethylene oxide) (PEO) and chloroform at a ratio of 200 mg PEO/10 mL chloroform. In this work, antimony doped fibers were obtained by adding a dopant solution of antimony trichloride and isopropanol at a ratio of 2.2812 g antimony trichloride/10 ml isopropanol to the original tin oxide precursor solution. The Sb concentration in the precursor solution is 1.5%. After deposition, the fibers were sintered 600deg. C in air for two hours. The electrical conductivity of single fibers measured at room temperature increases by up to three orders of magnitude when compared to undoped fibers prepared using the same method. The resistivity change as a function of the annealing temperature can be attributed to the thermally activated formation of a nearly stoichoimetric solid. The resistivity of the fibers changes monotonically with temperature from 714Ω-cm at 2 K to 0.1Ω-cm at 300 K. In the temperature range from 2 to 8 K the fibers have a positive magnetoresistance (MR) with the highest value of 155 % at 2 K and ±9 T. At temperatures of 10 and 12 K the sign of MR changes to negative values for low magnetic fields and positive for high magnetic fields. For higher temperatures (15 K and above) the MR becomes negative and its magnitude decreases with temperature

  2. Iodine-131 in breast milk following therapy for thyroid carcinoma

    International Nuclear Information System (INIS)

    Robinson, P.S.; Barker, P.; Campbell, A.

    1994-01-01

    This study evaluates breast milk secretion of 131 I following therapeutic adminstration of 4000 MBq of 131 I-iodide during lactation. Breast milk 131 I activity concentration was measured over a 32-day period. Dosimetry calculations were undertaken to estimate the period for discontinuation of breast feeding and the equivalent dose to the breasts. To achieve an infant effective dose 131 I-iodide adminstration is not undertaken during lactation and that breast feeding is discontinued several days prior to administration. 26 refs., 2 figs., 2 tabs

  3. Standardization of 131I therapy for Graves disease

    International Nuclear Information System (INIS)

    Tang Jianlin; Li Yuying; Gao Liuyan; Tang Xiuping; Hu Hongyong

    2011-01-01

    Objective: To establish the normative and standard measures, to ensure medical safety and quality of care of the patients with Graves disease treated by 131 I therapy. Methods: Formulating and strictly implementing the medical organizational and technical measures of 131 I therapy for Graves disease and regular follow-up. Results: Receiving 131 I treatment of 104 patients, follow-up 6-36 months, no adverse events, the cure rate of 59.6%, the efficient rate is 99.9%. Conclusion: It is important guarantee for the medical quality and safety to standardize the 131 I therapy of Graves disease. (authors)

  4. Escherichia coli ST131, an Intriguing Clonal Group

    Science.gov (United States)

    Bertrand, Xavier; Madec, Jean-Yves

    2014-01-01

    SUMMARY In 2008, a previously unknown Escherichia coli clonal group, sequence type 131 (ST131), was identified on three continents. Today, ST131 is the predominant E. coli lineage among extraintestinal pathogenic E. coli (ExPEC) isolates worldwide. Retrospective studies have suggested that it may originally have risen to prominence as early as 2003. Unlike other classical group B2 ExPEC isolates, ST131 isolates are commonly reported to produce extended-spectrum β-lactamases, such as CTX-M-15, and almost all are resistant to fluoroquinolones. Moreover, ST131 E. coli isolates are considered to be truly pathogenic, due to the spectrum of infections they cause in both community and hospital settings and the large number of virulence-associated genes they contain. ST131 isolates therefore seem to contradict the widely held view that high levels of antimicrobial resistance are necessarily associated with a fitness cost leading to a decrease in pathogenesis. Six years after the first description of E. coli ST131, this review outlines the principal traits of ST131 clonal group isolates, based on the growing body of published data, and highlights what is currently known and what we need to find out to provide public health authorities with better information to help combat ST131. PMID:24982321

  5. Obtainment of SnO2 for utilization of sensors by coprecipitation of tin salts

    International Nuclear Information System (INIS)

    Masetto, S.R.; Longo, E.

    1990-01-01

    Niobia doped tin dioxide was prepared by precipitation of tin dioxide II and IV using ammonium hydroxide. The powders were characterized by X-ray diffraction, particle size distribution and infra-red spectroscopy. (author) [pt

  6. Moessbauer and NMR study of novel Tin(IV)-lactames

    Energy Technology Data Exchange (ETDEWEB)

    Kuzmann, Erno; Szalay, Roland; Homonnay, Zoltan, E-mail: homonnay@ludens.elte.hu; Nagy, Sandor [Eoetvoes Lorand University, Institute of Chemistry (Hungary)

    2012-03-15

    N-tributylstannylated 2-pyrrolidinone was reacted with tributyltin triflate in different molar ratios and the complex formation monitored using {sup 1}H-NMR, {sup 13}C-NMR and {sup 119}Sn Moessbauer spectroscopy. Comparing the carbon NMR and tin Moessbauer results, a reaction scheme is suggested for the complexation which assumes the formation of a simultaneously O- and N-tributylstannylated pyrrolidinone cation. The formation of the only O-stannylated pyrrolidinone is also assumed to account for the non-constant Moessbauer parameters of the two tin environments in the distannylated pyrrolidinone cation when the ratio of tributyltin triflate is increased in the reaction.

  7. Thermal interaction for molten tin dropped into water

    Energy Technology Data Exchange (ETDEWEB)

    Arakeri, V.H.; Catton, I.; Kastenberg, W.E.; Plesset, M.S.

    1978-03-01

    Multiflash photography with extremely short duration exposure times per flash was used to observe the interaction of molten tin dropped into a water bath. Detailed photographic evidence is presented which demonstrates that transition, or nucleate boiling, is a possible triggering mechanism for vapor explosions. It was also found that the thermal constraints required to produce vapor explosions could be relaxed by introducing a stable thermal stratification within the coolant. In the present work, the threshold value of the initial tin temperature required for vapor explosion was reduced from about 500 to 343/sup 0/C.

  8. Thermal interaction for molten tin dropped into water

    International Nuclear Information System (INIS)

    Arakeri, V.H.; Catton, I.; Kastenberg, W.E.; Plesset, M.S.

    1978-01-01

    Multiflash photography with extremely short duration exposure times per flash has been used to observe the interaction of molten tin dropped into a water bath. Detailed photographic evidence is presented which demonstrates that transition, or nucleate boiling, is a possible triggering mechanism for vapour explosions. It was also found that the thermal constraints required to produce vapour explosions could be relaxed by introducing a stable thermal stratification within the coolant. In the present work, the threshold value of the initial tin temperature required for vapour explosion was reduced from about 500 to 343 0 C. (author)

  9. Discovery of the calcium, indium, tin, and platinum isotopes

    International Nuclear Information System (INIS)

    Amos, S.; Gross, J.L.; Thoennessen, M.

    2011-01-01

    Currently, twenty-four calcium, thirty-eight indium, thirty-eight tin, and thirty-nine platinum isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented. - Highlights: Documentation of the discovery of all calcium, indium, tin and platinum isotopes. → Summary of author, journal, year, place and country of discovery for each isotope. → Brief description of discovery history of each isotope.

  10. Hydrothermal synthesis of tungsten doped tin dioxide nanocrystals

    Science.gov (United States)

    Zhou, Cailong; Li, Yufeng; Chen, Yiwen; Lin, Jing

    2018-01-01

    Tungsten doped tin dioxide (WTO) nanocrystals were synthesized through a one-step hydrothermal method. The structure, composition and morphology of WTO nanocrystals were characterized by x-ray diffraction, x-ray photoelectron spectroscopy, energy dispersive x-ray spectroscopy, UV-vis diffuse reflectance spectra, zeta potential analysis and high-resolution transmission electron microscopy. Results show that the as-prepared WTO nanocrystals were rutile-type structure with the size near 13 nm. Compared with the undoped tin dioxide nanocrystals, the WTO nanocrystals possessed better dispersity in ethanol phase and formed transparent sol.

  11. An Empirical Model for Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    Science.gov (United States)

    Courey, Karim; Wright, Clara; Asfour, Shihab; Onar, Arzu; Bayliss, Jon; Ludwig, Larry

    2009-01-01

    In this experiment, an empirical model to quantify the probability of occurrence of an electrical short circuit from tin whiskers as a function of voltage was developed. This empirical model can be used to improve existing risk simulation models. FIB and TEM images of a tin whisker confirm the rare polycrystalline structure on one of the three whiskers studied. FIB cross-section of the card guides verified that the tin finish was bright tin.

  12. Behavior of Na131I and meta(131I) iodobenzylguanidine (MIBG) in municipal sewerage.

    Science.gov (United States)

    Fenner, F D; Martin, J E

    1997-08-01

    Behavior of 131I activity in primary sludge at the Ann Arbor, Michigan, Municipal Waste Water Treatment Plant was studied in relation to known radioiodine therapy events at the University of Michigan Hospital complex. The principal compounds administered are Na131I, which has widespread use, and meta (131I) iodobenzylguanidine (MIBG), which is a compound unique to the University of Michigan, although labeled antibodies and other forms are also used in therapy and research. The objectives of the study were to determine the environmental fate of such discharges and to determine radiation exposures to workers and the public when sludges are incinerated. Approximately 17% of the MIBG activity administered in a therapy was found in the primary sludge, whereas only 1.1% of the Na131I was in sludge. When land applied, the short half life of 131I in the sludge presents few radiological health concerns; however, incineration, which is done in winter months, is assumed to release organically bound 131I to the atmosphere. Radiation doses due to incineration of sludge containing measured concentrations were calculated for a maximally exposed worker to be 1.7 microSv (0.17 mrem) of which 0.48 microSv (0.048 mrem) was due to a 2-d upset condition. For a more typically exposed worker, and a member of the public, the committed effective dose equivalents were 1.2 microSv (0.12 mrem) and 0.06 microSv (0.006 mrem), respectively, for a 22-wk incineration period with release of all radioiodine in the sludge. Transport time to the treatment plant for radioiodine was found to be much longer than that of normal sewage, possibly due to organic material in sewer lines that absorb iodine. The residence time of radioiodine in the sewer also appears to be longer than expected; whether other radioactive materials are held up the same way is not known but chemical form is surely a factor.

  13. Production of 131I gelatin capsules

    International Nuclear Information System (INIS)

    Freud, A.; Hirshfeld, N.; Canfi, A.; Melamud, Y.

    1997-01-01

    Radioiodine ( 131 I) hard-gelatin capsules are widely used for the diagnosis and treatment of various thyroid disorders. Until 1980 radioiodine was supplied by us as a liquid dosage. This proved to be a rather inconvenient form since it resulted in inaccurate dosing by the physicians and caused frequent contamination of the patients and the hospital personnel. In an attempt to overcome these problems we have designed and constructed a production facility for capsules in which 1311 is packaged. Because of the extreme precautions necessary in handling radioactive compounds, encapsulation of radioactive materials requires specifically designed production techniques, special instrumentation and unique quality control procedures that are not encountered in the standard capsule production processes in the pharmaceutical industry

  14. A new anticancer agent--131I BGTP

    International Nuclear Information System (INIS)

    He Jiaheng; Jiang Shubin; Wang Guanquan

    2007-12-01

    A new anticancer precursor, di-peptide[p-Boc-Gly-Tyr-NH(CH 2 ) 2 NH-PO (ONH 4 )-O-PhI*], was synthesized and labelled with 131 I using enveloped-tube technique, the labelling yield could reach 85%. Using cell coalescent method, the biological activity in vitro of the labelled compounds was evaluated, showing that the primary appetency was kept and not damaged obviously during labelling. Results on judgement of their stability, lipophilicity and toxicity demonstrated lower toxicity, higher lipophilicity and lower iodium disassociation percentage (<12% after 72 h); furthermore, a tumour-bearing animal model, was establishd successfully, on which, the biological properties of the labelled agent was studied. (authors)

  15. Telomere dysfunction and cell survival: Roles for distinct TIN2-containing complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sahn-ho; Davalos, Albert R.; Heo, Seok-Jin; Rodier, Francis; Zou, Ying; Beausejour, Christian; Kaminker, Patrick; Yannone, Steven M.; Campisi, Judith

    2007-10-02

    Telomeres are maintained by three DNA binding proteins (TRF1, TRF2 and POT1), and several associated factors. One factor, TIN2, binds TRF1 and TRF2 directly and POT1 indirectly. Along with two other proteins, TPP1 and hRap1, these form a soluble complex that may be the core telomere maintenance complex. It is not clear whether sub-complexes also exist in vivo. We provide evidence for two TIN2 sub-complexes with distinct functions in human cells. We isolated these two TIN2 sub-complexes from nuclear lysates of unperturbed cells and cells expressing TIN2 mutants TIN2-13, TIN2-15C, which cannot bind TRF2 or TRF1, respectively. In cells with wild-type p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere uncapping and eventual growth arrest. In cells lacking p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere dysfunction and cell death. Our findings suggest that distinct TIN2 complexes exist, and that TIN2-15C-sensitive subcomplexes are particularly important for cell survival in the absence of functional p53.

  16. Telomere dysfunction and cell survival: roles for distinctTIN2-containing complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sahn-Ho; Davalos, Albert R.; Heo, Seok-Jin; Rodier, Francis; Beausejour, Christian; Kaminker, Patrick; Campisi, Judith

    2006-11-07

    Telomeres are maintained by three DNA binding proteins, TRF1, TRF2 and POT1, and several associated factors. One factor, TIN2, binds TRF1 and TRF2 directly and POT1 indirectly. These and two other proteins form a soluble complex that may be the core telomere-maintenance complex. It is not clear whether subcomplexes exist or function in vivo. Here, we provide evidence for two TIN2 subcomplexes with distinct functions in human cells. TIN2 ablation by RNA interference caused telomere uncapping and p53-independent cell death in all cells tested. However, we isolated two TIN2 complexes from cell lysates, each selectively sensitive to a TIN2 mutant (TIN2-13, TIN2-15C). In cells with wild-type p53 function, TIN2-15C was more potent than TIN2-13 in causing telomere uncapping and eventual growth arrest. In cells lacking p53 function, TIN215C more than TIN2-13 caused genomic instability and cell death. Thus, TIN2 subcomplexes likely have distinct functions in telomere maintenance, and may provide selective targets for eliminating cells with mutant p53.

  17. The tin mining and heavy mineral processing industry in the Kinta Valley, Perak, Malaysia

    International Nuclear Information System (INIS)

    Lee Swee Ching

    1994-01-01

    Overview of the tin mining and heavy mineral processing in the Kinta Valley, Perak, Malaysia was presented. Amang, a mixture composed of tin ore, sand, ilmenite, monazite, zircon, xenotime, struvite, etc , as a product from tin mining activities was discussed too in this paper

  18. 77 FR 5767 - Certain Tin Mill Products From Japan: Rescission of Antidumping Duty Administrative Review

    Science.gov (United States)

    2012-02-06

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order covering certain tin mill products from Japan. The period of review is August 1, 2010... parties to request an administrative review of the antidumping duty order on certain tin mill products...

  19. 76 FR 14902 - Certain Tin Mill Products From Japan: Rescission of Antidumping Duty Administrative Review

    Science.gov (United States)

    2011-03-18

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order covering certain tin mill products from Japan. The period of review is August 1, 2009... parties to request an administrative review of the antidumping duty order on certain tin mill products...

  20. 77 FR 34938 - Certain Tin Mill Products From Japan: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2012-06-12

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order on certain tin mill products from Japan would likely lead to continuation or recurrence of...: Background On August 28, 2000, the Department published the antidumping duty order on certain tin mill...

  1. NASA Goddard Space Flight Center Tin Whisker (and Other Metal Whisker) Homepage

    Science.gov (United States)

    Brusse, Jay; Sampson, Mike; Leidecker, Henning; Kadesch, Jong

    2004-01-01

    This website provides information about tin whiskers and related research. The independent research performed during the past 50+ years is so vast that it is impractical to cover all aspects of tin whiskers in this one resource. Therefore, the absence of information in this website about a particular aspect of tin whiskers should NOT be construed as evidence of absence.

  2. The analogy research study on gamma radiation dose rate of radioisotopes 131Ba and 131I

    International Nuclear Information System (INIS)

    Hu Youhua; Feng Guangwen

    2013-01-01

    Analogy is a inference method ,according some properties of a class of things to inferring the similar things should also have the similar properties. The analogy of same radionuclides is widely used in radioisotope logging environment impact assessment so far. This paper is to provide fFor future providing a theoretical calculation method and analogy method between different radionuclides in radioisotope logging environment impact assessment. In this paper, using the latest decay scheme, through theoretical modeling, the aim is the the establishment of 131 Ba and 131 I radioisotopes gamma radiation dose rate calculation method, and try to carry out analogy research on gamma radiation dose rate of different radioisotopes with the same activity. The results show that the analogy of different radionuclides is feasible, which provides the new method reference for carrying out such radiation environmental impact assessment in future. (authors)

  3. Clinical applications of radioiodine 131 (I131) in the thyroid diseases

    International Nuclear Information System (INIS)

    Gonzalez Rivero, Levi; Turcios Trista, Silvia Elena; Velasco Mirabal, Milagros

    2012-01-01

    Radioiodine 131 is a radioactive isotope that is successfully used for the diagnosis and the treatment of benign and malignant thyroid diseases. Its quality of selectively integrating to the thyroid metabolism and emitting a signal allows it to describe the gland functioning through capture studies, and to delimit the morphology and location of the tissues that capture iodine by means of scintigraphy. It is also a simple, safe and cost-effective radiotherapy used as first-line therapeutics in the control of hyperthyroidism. The dose and right time of application should be individualized according to the etiology and the clinic of each patient. Radioiodine 131 offers an efficient alternative to reduce the size of non-toxic goiter in addition to supporting the surgical treatment of the differentiated thyroid carcinoma and destroying with ablative doses the tissular remains and the metastatic lesions that can be detected during the gammagraphic follow-up. Radioiodine 131 depends on the fulfillment of safety regulations against radioactivity

  4. Clinical applications of radioiodine 131 (I131) in the thyroid diseases

    International Nuclear Information System (INIS)

    Gonzalez, Rivero Levi; Turcios Trista, Silvia Elena; Velasco Mirabal, Milagros

    2012-01-01

    Radioiodine 131 is a radioactive isotope that is successfully used for the diagnosis and the treatment of benign and malignant thyroid diseases. Its quality of selectively integrating to the thyroid metabolism and emitting a signal allows it to describe the gland functioning through capture studies, and to delimit the morphology and location of the tissues that capture iodine by means of gammagraphy. It is also a simple, safe and cost-effective radiotherapy used as first-line therapeutics in the control of hyperthyroidism. The dose and right time of application should be individualized according to the etiology and the clinic of each patient. Radioiodine 131 offers an efficient alternative to reduce the size of non-toxic goiter in addition to supporting the surgical treatment of the differentiated thyroid carcinoma and destroying with ablative doses the tissular remains and the metastatic lesions that can be detected during the gammagraphic follow-up. Radioiodine 131 depends on the fulfillment of safety regulations against radioactivity

  5. Interesterification of rapeseed oil catalyzed by tin octoate

    International Nuclear Information System (INIS)

    Galia, Alessandro; Centineo, Alessio; Saracco, Guido; Schiavo, Benedetto; Scialdone, Onofrio

    2014-01-01

    The interesterification of rapeseed oil was performed for the first time by using tin octoate as Lewis acid homogeneous catalysts and methyl or ethyl acetate as acyl acceptors in a batch reactor, within the temperature range 393–483 K. The yields in fatty acid ethyl esters (FAEE) and triacetin (TA) after 20 h of reaction time increased from 8% and 2%–to 61% and 22%, respectively, when the reaction temperature increased from 423 to 483 K. An optimum value of 40 for the acyl acceptor to oil molar ratio was found to be necessary to match good fatty acid alkyl ester yields with high enough reaction rate. The rate of generation of esters was significantly higher when methyl acetate was used as acyl acceptor instead of its ethyl homologue. The collected results suggest that tin octoate can be used as effective catalyst for the interesterification of rapeseed oil with methyl or ethyl acetate being highly soluble in the reaction system, less expensive than enzymes and allowing the operator to work under milder conditions than supercritical interesterification processes. - Highlights: • We study the interesterification of rapeseed oil catalyzed by tin(II) octoate. • Tin(II) octoate is an effective homogeneous catalyst at 483 K. • The acyl acceptor to oil molar ratio must be optimized. • Higher rate of reaction is obtained with methyl acetate as acyl acceptor

  6. Chaos in a coulombic muffin-tin potential

    International Nuclear Information System (INIS)

    Brandis, S.

    1994-04-01

    We study the two-dimensional classical scattering dynamics by a Muffin-Tin potential with 3 Coulomb singularities. A complete symbolic dynamics for the periodic orbits is derivd. The classical trajectories are shown to be hyperbolic everywhere in phase space and to carry no conjugate points. (orig.)

  7. Generalized KKR-theory for non-muffin-tin potentials

    NARCIS (Netherlands)

    Molenaar, J.

    1989-01-01

    The author shows that the secular equation in KKR (Korringa, Kohn and Rostoker) theory retains its separable structure also in the case of non-muffin-tin potentials. This generalisation has been extensively discussed recently. During this discussion, in which the possible necessity of so-called near

  8. Variationally-optimized muffin-tin potentials for band calculations

    International Nuclear Information System (INIS)

    Pant, M.M.

    1979-09-01

    A method is suggested to determine the best local periodic crystal potential V(r) by minimizing the Hartree-Fock expectation value of the energy. The explicit form of the integral equation for the local exchange potential is obtained for the special case of the Muffin-tin aproximation. (author)

  9. Highly conducting and transparent sprayed indium tin oxide

    Energy Technology Data Exchange (ETDEWEB)

    Rami, M.; Benamar, E.; Messaoudi, C.; Sayah, D.; Ennaoui, A. (Faculte des Sciences, Rabat (Morocco). Lab. de Physique des Materiaux)

    1998-03-01

    Indium tin oxide (ITO) has a wide range of applications in solar cells (e.g. by controlling the resistivity, we can use low conductivity ITO as buffer layer and highly conducting ITO as front contact in thin films CuInS[sub 2] and CuInSe[sub 2] based solar cells) due to its wide band gap (sufficient to be transparent) in both visible and near infrared range, and high carrier concentrations with metallic conduction. A variety of deposition techniques such as reactive electron beam evaporation, DC magnetron sputtering, evaporation, reactive thermal deposition, and spray pyrolysis have been used for the preparation of undoped and tin doped indium oxide. This latter process which makes possible the preparation of large area coatings has attracted considerable attention due to its simplicity and large scale with low cost fabrication. It has been used here to deposit highly transparent and conducting films of tin doped indium oxide onto glass substrates. The electrical, optical and structural properties have been investigated as a function of various deposition parameters namely dopant concentrations, temperature and nature of substrates. X-ray diffraction patterns have shown that deposited films are polycrystalline without second phases and have preferred orientation [400]. INdium tin oxide layers with small resistivity value around 7.10[sup -5] [omega].cm and transmission coefficient in the visible and near IR range of about 85-90% have been easily obtained. (authors) 13 refs.

  10. On the electrochemical migration mechanism of tin in electronics

    DEFF Research Database (Denmark)

    Minzari, Daniel; Jellesen, Morten Stendahl; Møller, Per

    2011-01-01

    Electrochemical migration (ECM) of tin can result in the growth of a metal deposit with a dendritic structure from cathode to anode. In electronics, such growth can lead to short circuit of biased electrodes, potentially leading to intermittent or complete failure of an electronic device...

  11. Tasmanian tin and tungsten granites - their radiometric characteristics

    International Nuclear Information System (INIS)

    Yeates, A.N.

    1982-01-01

    A radiometric survey of Tasmanian granites has shown, with one exception, that tin and tungsten-bearing granites have high radioactivity, largely owing to increased uranium. Many have a high uranium/thorium ratio as well. Radiometric measurements can also delineate different granite types within composite bodies

  12. Classical and quantum chaotic scattering in a muffin tin potential

    International Nuclear Information System (INIS)

    Brandis, S.

    1995-05-01

    In this paper, we study the classical mechanics, the quantum mechanics and the semi-classical approximation of the 2-dimensional scattering from a muffin tin potential. The classical dynamical system for Coulombic muffin tins is proven to be chaotic by explicit construction of the exponentially increasing number of periodic orbits. These are all shown to be completely unstable (hyperbolic). By methods of the thermodynamic formalism we can determine the Hausdorff dimension, escape rate and Kolmogorov-Sinai-entropy of the system. An extended KKR-method is developed to determine the quantum mechanical S-matrix. We compare a few integrable scattering examples with the results of the muffin tin scattering. Characteristic features of the spectrum of eigenphases turn out to be the level repulsion and long range rigidity as compared to a completely random spectrum. In the semiclassical analysis we can rederive the regularized Gutzwiller trace formula directly from the exact KKR-determinant to prove that no further terms contribute in the case of the muffin tin potential. The periodic orbit sum allows to draw some qualitative conclusions about the effects of classical chaos on the quantum mechanics. In the context of scaling systems the theory of almost periodic functions is discussed as a possible mathematical foundation for the semiclassical periodic orbit sums. Some results that can be obtained from this analysis are developed in the context of autocorrelation functions and distribution functions for chaotic scattering systems. (orig.)

  13. Chemical vapor deposition of tin oxide: fundamentals and applications

    NARCIS (Netherlands)

    Mol, A.M.B. van; Chae, Y.; McDaniel, A.H.; Allendorf, M.D.

    2006-01-01

    Tin oxide thin layers have very beneficial properties such as a high transparency for visible light and electrical conductivity making these coatings suitable for a wide variety of applications, such as solar cells, and low-emissivity coatings for architectural glass windows. Each application

  14. Quadtree of TIN: a new algorithm of dynamic LOD

    Science.gov (United States)

    Zhang, Junfeng; Fei, Lifan; Chen, Zhen

    2009-10-01

    Currently, Real-time visualization of large-scale digital elevation model mainly employs the regular structure of GRID based on quadtree and triangle simplification methods based on irregular triangulated network (TIN). TIN is a refined means to express the terrain surface in the computer science, compared with GRID. However, the data structure of TIN model is complex, and is difficult to realize view-dependence representation of level of detail (LOD) quickly. GRID is a simple method to realize the LOD of terrain, but contains more triangle count. A new algorithm, which takes full advantage of the two methods' merit, is presented in this paper. This algorithm combines TIN with quadtree structure to realize the view-dependence LOD controlling over the irregular sampling point sets, and holds the details through the distance of viewpoint and the geometric error of terrain. Experiments indicate that this approach can generate an efficient quadtree triangulation hierarchy over any irregular sampling point sets and achieve dynamic and visual multi-resolution performance of large-scale terrain at real-time.

  15. Determination of tungsten and tin ions after preconcentration by flotation

    International Nuclear Information System (INIS)

    Dietze, U.; Kunze, S.

    1990-01-01

    A highly sensitive and selective combined method of flotation followed by spectrophotometry/d.c. polarography for the determination of tungsten and tin ions in acid and alkaline waste waters and hydrometallurgical solutions is presented here. Both kinds of ions are coprecipitated in the analyte solution with zirconium hydroxide after addition of ZrOCl 2 solution and ammonia. Afterwards, the collector precipitate is separated from the aqueous phase and preconcentrated by flotation for which sodium oleate and a frother are added. The precipitate is dissolved in a small amount of acid, with the organic reagents being destroyed by oxidation. The enrichment factor of the proposed technique is 100, with variations possible. Recovery is 94 % for tungsten and 99 % for tin. Spectrophotometry of the thiocyanate complex and d.c. polarography are applied as determination techniques for tungsten and tin, respectively. Detection limits attainable by this technique are 6 ng.ml -1 for tungsten and 5 ng.ml -1 for tin for the initial sample. (Authors)

  16. Recent results on neutron rich tin isotopes by laser spectroscopy

    CERN Document Server

    Roussière, B; Crawford, J E; Essabaa, S; Fedosseev, V; Geithner, W; Genevey, J; Girod, M; Huber, G; Horn, R; Kappertz, S; Lassen, J; Le Blanc, F; Lee, J K P; Le Scornet, G; Lettry, Jacques; Mishin, V I; Neugart, R; Obert, J; Oms, J; Ouchrif, A; Peru, S; Pinard, J; Ravn, H L; Sauvage, J; Verney, D

    2001-01-01

    Laser spectroscopy measurements have been performed on neutron rich tin isotopes using the COMPLIS experimental setup. The nuclear charge radii of the even-even isotopes from A=108 to 132 are compared to the results of macroscopic and microscopic calculations. The improvements and optimizations needed to perform the isotope shift measurement on $^{134}$Sn are presented.

  17. Mechanical Properties of Glass Surfaces Coated with Tin Oxide

    DEFF Research Database (Denmark)

    Swindlehurst, W. E.; Cantor, B.

    1978-01-01

    The effect of tin oxide coatings on the coefficient of friction and fracture strength of glass surfaces is studied. Experiments were performed partly on commercially treated glass bottles and partly on laboratory prepared microscope slides. Coatings were applied in the laboratory by decomposition...

  18. Renal 131I-hippuran extraction in man

    DEFF Research Database (Denmark)

    Hutchings, M; Hesse, B; Grønvall, J

    2002-01-01

    This study examined the 131I-hippuran extraction fraction during baseline renal blood flow rates and at high flow rates induced by dopamine.......This study examined the 131I-hippuran extraction fraction during baseline renal blood flow rates and at high flow rates induced by dopamine....

  19. 21 CFR 155.131 - Canned field corn.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Canned field corn. 155.131 Section 155.131 Food... Canned field corn. (a) Identity. (1) Canned field corn conforms to the definition and standard of... corn by § 155.130(a), except that the corn ingredient consists of succulent field corn or a mixture of...

  20. 131I-BSP liver function test by BSP tolerance

    International Nuclear Information System (INIS)

    Kanda, Koichi

    1974-01-01

    131 I-BSP liver function test after BSP intravenous tolerance was discussed, assuming that the reason why measurements of 131 I-BSP retention rate at 30 minutes and 131 I-BSP disappearance rate in blood showed respectable overlapping between normal group and group with slight liver disorders as compared with BSP test and the reason why differential diagnosis was difficult were due to underestimate of tolerance volume of 131 I-BSP. 131 I-BSP was observed with time as to 70 persons with normal liver function and 257 cases of liver diseases, using 5, 3 and 2 mg of non-radioactive BSP tolerance volume per kilogram of body weight. 131 I-BSP retention rate at 30 minutes and 131 I-BSP disappearance rate in blood are possible to separate overlapping over control in each measurement value at 3-5 mg/kg of tolerance, and in comparison of 3 mg and 5 mg, the latter showed a little excellent result. So, it was decided that tolerance of 3 mg/kg was a proper dose, considering tolerance to liver cells. 131 I-BSP retention rate at 30 minutes was a little excellent in accuracy and disappearance rate in blood after BSP tolerance is simple and profitable for practical use because collection of blood was only one time and measurement could be made with whole blood. As mentioned above, this method is seemed to be useful to practice of liver function test. (Kanao, N.)

  1. 45 CFR 96.131 - Treatment services for pregnant women.

    Science.gov (United States)

    2010-10-01

    ... Substance Abuse Prevention and Treatment Block Grant § 96.131 Treatment services for pregnant women. (a) The State is required to, in accordance with this section, ensure that each pregnant woman in the State who... 45 Public Welfare 1 2010-10-01 2010-10-01 false Treatment services for pregnant women. 96.131...

  2. Treatment's results of hyperthyroid patients with Iodine-131

    International Nuclear Information System (INIS)

    Bastan-Hagh, M.H.; Larijani, B.; Rahim-Tabrizi, P.; Khalili-Fard, A.R.; Baradar-Jalili, R.; Saghari, M.

    2004-01-01

    Introduction: radioiodine ( 131 I) is an effective and inexpensive alternative to surgery in the treatment of thyroid hyper function. The debate today concerns the maximum and minimum ablative doses, and factors leading to hypothyroidism. Patients and method: 1035 hyperthyroid patients treated with weight-adjusted ablative doses of 131 I were retrospectively assessed for treatment outcome or correlated with sex, age, underlying pathology, and administrated dose of 131 I . Results: Thyroid hyper function was more common in women. The greatest proportions of patients were in the 31-40 years age group and the smallest proportion over -70. The commonest underlying pathology was Grave's disease. Men had a lower response rate to 131 I therapy, with 2.4-fold greater probability of persistent hyperthyroidism (P 131 I hypothyroidism decreased with increasing age (P 131 I therapy was seen in patients with toxic adenoma, (P=0.0001). The incidence of hypothyroidism did not show a positive correction with increased administered dose of 131 I (P 131 I was effective in reducing thyroid nodule size. There were 18 cases of temporary hyperthyroidism, all of which recovered to euthyroid status within 12 months. Conclusion: one dose of radioiodine was effective in treatment of hyperthyroid patients in 91.2 % of cases. Age, sex and underlying pathology were determining factors. In most cases the average time to hypothyroidism was reasonably short, obviating the need for long time follow up in these patients

  3. 26 CFR 1.3-1 - Application of optional tax.

    Science.gov (United States)

    2010-04-01

    ..., appropriate to his number of exemptions, provided for cases in which a joint return is filed. (c) Use of tax... in the case of a joint return (including the return of a surviving spouse) and lesser income... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Application of optional tax. 1.3-1 Section 1.3-1...

  4. 29 CFR 452.131 - Casting of ballots; delegate elections.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Casting of ballots; delegate elections. 452.131 Section 452... REPORTING AND DISCLOSURE ACT OF 1959 Election Procedures; Rights of Members § 452.131 Casting of ballots; delegate elections. The manner in which the votes of the representatives are cast in the convention is not...

  5. 28 CFR 35.131 - Illegal use of drugs.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Illegal use of drugs. 35.131 Section 35... STATE AND LOCAL GOVERNMENT SERVICES General Requirements § 35.131 Illegal use of drugs. (a) General. (1... an individual based on that individual's current illegal use of drugs. (2) A public entity shall not...

  6. 6 CFR 13.1 - Basis, purpose, scope and effect.

    Science.gov (United States)

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Basis, purpose, scope and effect. 13.1 Section 13.1 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL... Security on or after October 12, 2005. (2) Program fraud cases initiated by any component of the Department...

  7. 12 CFR 410.131-410.139 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false [Reserved] 410.131-410.139 Section 410.131-410.139 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY EXPORT-IMPORT BANK OF THE UNITED STATES §§ 410...

  8. Chemical and physical quality control of the HIPPURAN-131I

    International Nuclear Information System (INIS)

    Morin Zorilla, J.; Olive, E.; Isaac, M.; Cruz, J.

    1989-01-01

    Some physico-chemical methods for analytical control of Hippuran- 131 I are compared. The most convenient to applicate in hospitals and in more specialized quality control laboratories are recommended. The quality of Hippuran- 131 I produced by ISOTOP (USSR) is also evaluated. The product met the requirement of the International Pharmacopeia

  9. 131I therapy of Graves' disease using lithium

    International Nuclear Information System (INIS)

    Sato, Kenshi

    1983-01-01

    Lithium is known to cause goiter and hypothyroidism. In the mechanism of goitrogenesis, there is general agreement that lithium inhibits the release of the thyroid hormones from the thyroid gland without significantly impairing other thyroid functions. The present study was undertaken, therefore, to investigate the usefulness of lithium in the radioiodine treatment of Graves' disease. Nine patients with Graves' disease who were all, except one, previously treated with antithyroid drugs were studied. 600 mg of lithium carbonate were administered daily to investigate the effects on thyroidal 131 I uptake, disappearance rate of 131 I from the prelabeled thyroid and the serum concentrations of thyroid hormones. Lithium showed no significant effect on the thyroidal 131 I uptake when the 24 hour thyroidal 131 I uptakes were determined both before and during lithium treatment in the five cases. On the other hand, lithium clearly prolonged the mean value of effective half-lives of 131 I to approximately 8 days vs. 5.1 days before lithium treatment (p 4 and T 3 levels significantly decreased during lithium treatment, from 21.3 to 12.4μg/dl (n=9, p 131 I for the Graves' disease can be reduced by using lithium, the radiation exposure to the total body is decreased. Moreover, it is possible to perform the 131 I therapy while improving the thyrotoxicosis with lithium. Finally, it is concluded that lithium is a very useful drug to be combined with the 131 I therapy of Graves' disease. (author)

  10. Tin Whisker Formation — A Stress Relieve Phenomenon

    Science.gov (United States)

    Dittes, M.; Oberndorff, P.; Crema, P.; Su, P.

    2006-02-01

    With the move towards lead-free electronics also the solderable finish of electronic components' terminations are converted. While the typical finish was containing 5 % to 20 % lead (Pb) and thus was almost whisker free, lead (Pb)-free finishes such as pure tin or high tin alloys are rather prone to grow whisker. These whiskers are spontaneous protrusions that grow to a significant length of up to millimeters with a typical diameter in the range of few microns and are suspect to cause shorts in electronic assemblies. The latest details of the mechanisms are not yet understood. However it appears to be well established that the driving force for tin whisker growth is a compressive stress in the tin layer and that this stress is released by whisker formation. Besides the mechanism for whisker growth therefore the mechanism of the stress induction is of interest. The origin of that stress may have multiple sources. Among others the most important one is the volume increase within the tin layer due the formation of intermetallics at the interface to the base material. This applies to all copper based material. For base materials with a coefficient of thermal expansion (cte) significantly different from the tin finish another mechanism plays the dominant role. This is the induction of stress during thermal cycling due to the different expansion of the materials with every temperature change. Another mechanism for stress induction may be the oxidation of the finish, which also leads to a local volume increase. Based on the knowledge of stress induction various mitigation strategies can be deducted. Most common is the introduction of a diffusion barrier (e.g. Ni) in order to prevent the growth of the Cu-Sn intermetallics, the controlled growth of Cu-Sn intermetallics in order to prevent their irregularity or the introduction of a mechanical buffer material targeting at the minimisation of the cte mismatch between base and finish material. With respect to the stress

  11. [sup 131]I-metaiodobenzylguanidine therapy for malignant pheochromocytoma

    Energy Technology Data Exchange (ETDEWEB)

    Sakahara, Harumi; Saga, Tsuneo; Hosono, Makoto; Kobayashi, Hisataka; Konishi, Junji (Kyoto Univ. (Japan). Faculty of Medicine); Endo, Keigo

    1994-05-01

    [sup 131]I-metaiodobenzylguanidine (MIBG) therapy was given to five patients with malignant pheochromocytoma. The patients received 1-3 doses of 3.33-4.625 GBq (total dose: 3.7 to 10.73 GBq). Partial tumor regression was observed in two patients, the tumor was unchanged in two patients, and slow progression was noted in one patient. Marked improvement in clinical symptoms was achieved in four patients. The other patients had no symptoms before [sup 131]I-MIBG treatment, but the serum epinephrine and dopamine decreased. There were no severe untoward responses in four patients. However, one patient developed transient but severe orthostatic hypotension, hypertension, and hyperglycemia from 1 week to 1 month after [sup 131]I-MIBG administration. Although complete remission was not obtained, all the patients achieved some benefit from [sup 131]I-MIBG therapy. Thus, [sup 131]I-MIBG appears to be useful for the palliation of malignant pheochromocytoma. (author).

  12. Proton microprobe study of tin-polymetallic deposits

    Energy Technology Data Exchange (ETDEWEB)

    Murao, S. [Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Sie, S.H.; Suter, G.F. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

    1996-12-31

    Tin-polymetallic vein type deposits are a complex mixture of cassiterite and sulfides and they are the main source of technologically important rare metals such as indium and bismuth. Constituent minerals are usually fine grained having wide range of chemical composition and often the elements of interest occur as trace elements not amenable to electron microprobe analysis. PIXE with a proton microprobe can be an effective tool to study such deposits by delineating the distribution of trace elements among carrier minerals. Two representative indium-bearing deposits of tin- polymetallic type, Tosham of India (Cu-ln-Bi-Sn-W-Ag), and Mount Pleasant of Canada (Zn-Cu-In-Bi-Sn-W), were studied to delineate the distribution of medical/high-tech rare metals and to examine the effectiveness of the proton probe analysis of such ore. One of the results of the study indicated that indium and bismuth are present in chalcopyrite in the deposits. In addition to these important rare metals, zinc, copper, arsenic, antimony, selenium, and tin are common in chalcopyrite and pyrite. Arsenopyrite contains nickel, copper, zinc, silver, tin, antimony and bismuth. In chalcopyrite and pyrite, zinc, arsenic, indium, bismuth and lead are richer in Mount Pleasant ore, but silver is higher at Tosham. Also thallium and gold were found only in Tosham pyrite. The Tosham deposit is related to S-type granite, while Mount Pleasant to A-type. It appears that petrographic character of the source magma is one of the factors to determine the trace element distribution in tin-polymetallic deposit. 6 refs., 2 figs.

  13. Proton microprobe study of tin-polymetallic deposits

    Energy Technology Data Exchange (ETDEWEB)

    Murao, S [Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Sie, S H; Suter, G F [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

    1997-12-31

    Tin-polymetallic vein type deposits are a complex mixture of cassiterite and sulfides and they are the main source of technologically important rare metals such as indium and bismuth. Constituent minerals are usually fine grained having wide range of chemical composition and often the elements of interest occur as trace elements not amenable to electron microprobe analysis. PIXE with a proton microprobe can be an effective tool to study such deposits by delineating the distribution of trace elements among carrier minerals. Two representative indium-bearing deposits of tin- polymetallic type, Tosham of India (Cu-ln-Bi-Sn-W-Ag), and Mount Pleasant of Canada (Zn-Cu-In-Bi-Sn-W), were studied to delineate the distribution of medical/high-tech rare metals and to examine the effectiveness of the proton probe analysis of such ore. One of the results of the study indicated that indium and bismuth are present in chalcopyrite in the deposits. In addition to these important rare metals, zinc, copper, arsenic, antimony, selenium, and tin are common in chalcopyrite and pyrite. Arsenopyrite contains nickel, copper, zinc, silver, tin, antimony and bismuth. In chalcopyrite and pyrite, zinc, arsenic, indium, bismuth and lead are richer in Mount Pleasant ore, but silver is higher at Tosham. Also thallium and gold were found only in Tosham pyrite. The Tosham deposit is related to S-type granite, while Mount Pleasant to A-type. It appears that petrographic character of the source magma is one of the factors to determine the trace element distribution in tin-polymetallic deposit. 6 refs., 2 figs.

  14. Characterization of tin films synthesized from ethaline deep eutectic solvent

    International Nuclear Information System (INIS)

    Ghosh, Swatilekha; Roy, Sudipta

    2014-01-01

    Highlights: • Tin deposition was achieved by galvanostatic method on the basic substrates from ethaline deep eutectic solvent without use of any additives. • The current potential behaviour of tin system changes with increase in concentration of hydrated tin chloride in ethaline. • The deposition rate in ethaline display three times lower value compared to aqueous electrolytes. • Fine grained crystals of 62 ± 10 nm were obtained for tin deposits. • The deposition process is economical and can be adapted for industrial applications. - Abstract: Tin (Sn) films were electrodeposited by galvanostatic method from ethaline deep eutectic solvent (DES), without any additives. The effect of various deposition parameters on the microstructure was studied. With increase in metal salt concentration from 0.01 to 0.1 M, changes in current–potential behaviour were observed in the polarization scans. This might be due to the existence of [SnCl 3 ] − , [Sn 2 Cl 5 ] − complexes in ethaline DES. Smooth and homogeneous deposits were obtained on a steel substrate surface by applying current density of 1.57 × 10 −3 A/cm 2 at 25 °C. Under these conditions the deposition rate was found to be 0.1 ± 10% μm/min and current efficiency was obtained as 84 ± 3%. XRD analysis of the deposit confirmed the polycrystalline tetragonal structure with mostly (2 0 0) orientation having a crystallite size about 62 ± 16% nm along with an internal strain of 0.0031 ± 22%. The present deposition method is simple, economical and can be adapted for industrial applications

  15. Proton microprobe study of tin-polymetallic deposits

    International Nuclear Information System (INIS)

    Murao, S.; Sie, S.H.; Suter, G.F.

    1996-01-01

    Tin-polymetallic vein type deposits are a complex mixture of cassiterite and sulfides and they are the main source of technologically important rare metals such as indium and bismuth. Constituent minerals are usually fine grained having wide range of chemical composition and often the elements of interest occur as trace elements not amenable to electron microprobe analysis. PIXE with a proton microprobe can be an effective tool to study such deposits by delineating the distribution of trace elements among carrier minerals. Two representative indium-bearing deposits of tin- polymetallic type, Tosham of India (Cu-ln-Bi-Sn-W-Ag), and Mount Pleasant of Canada (Zn-Cu-In-Bi-Sn-W), were studied to delineate the distribution of medical/high-tech rare metals and to examine the effectiveness of the proton probe analysis of such ore. One of the results of the study indicated that indium and bismuth are present in chalcopyrite in the deposits. In addition to these important rare metals, zinc, copper, arsenic, antimony, selenium, and tin are common in chalcopyrite and pyrite. Arsenopyrite contains nickel, copper, zinc, silver, tin, antimony and bismuth. In chalcopyrite and pyrite, zinc, arsenic, indium, bismuth and lead are richer in Mount Pleasant ore, but silver is higher at Tosham. Also thallium and gold were found only in Tosham pyrite. The Tosham deposit is related to S-type granite, while Mount Pleasant to A-type. It appears that petrographic character of the source magma is one of the factors to determine the trace element distribution in tin-polymetallic deposit. 6 refs., 2 figs

  16. Process for Making a Noble Metal on Tin Oxide Catalyst

    Science.gov (United States)

    Davis, Patricia; Miller, Irvin; Upchurch, Billy

    2010-01-01

    To produce a noble metal-on-metal oxide catalyst on an inert, high-surface-area support material (that functions as a catalyst at approximately room temperature using chloride-free reagents), for use in a carbon dioxide laser, requires two steps: First, a commercially available, inert, high-surface-area support material (silica spheres) is coated with a thin layer of metal oxide, a monolayer equivalent. Very beneficial results have been obtained using nitric acid as an oxidizing agent because it leaves no residue. It is also helpful if the spheres are first deaerated by boiling in water to allow the entire surface to be coated. A metal, such as tin, is then dissolved in the oxidizing agent/support material mixture to yield, in the case of tin, metastannic acid. Although tin has proven especially beneficial for use in a closed-cycle CO2 laser, in general any metal with two valence states, such as most transition metals and antimony, may be used. The metastannic acid will be adsorbed onto the high-surface-area spheres, coating them. Any excess oxidizing agent is then evaporated, and the resulting metastannic acid-coated spheres are dried and calcined, whereby the metastannic acid becomes tin(IV) oxide. The second step is accomplished by preparing an aqueous mixture of the tin(IV) oxide-coated spheres, and a soluble, chloride-free salt of at least one catalyst metal. The catalyst metal may be selected from the group consisting of platinum, palladium, ruthenium, gold, and rhodium, or other platinum group metals. Extremely beneficial results have been obtained using chloride-free salts of platinum, palladium, or a combination thereof, such as tetraammineplatinum (II) hydroxide ([Pt(NH3)4] (OH)2), or tetraammine palladium nitrate ([Pd(NH3)4](NO3)2).

  17. NMR as a tool for kinetic studies: application to the assessment of organo tin reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Fouquet, E.; Roulet, T. [Bordeaux-1 Univ., 33 - Talence (France); Pianet, I. [Bordeaux-1 Univ., 33 -Talence (France) CNRS, Centre d`Etudes Structurales et d`Analyse des Molecules Organiques; Willem, R. [Brussels University (VUB), Brussels (Belgium)

    1998-02-01

    There is a growing interest for the research of an answer to the environmental problems related to the industrial use of tetra organo tins. An interesting alternative would be to develop the chemistry of mono organo tins because of their lower toxicity and of the easy removal of ``inorganic`` tin side products. In this work, halogen exchange rates are measured for various mono organo tins with NMR techniques (EXSY spectra and 1 D {sup 119} Sn NMR), and an exchange mechanism is proposed. A correlation between kinetic data and the reactivity of the mono organo tins is then exemplified with radical allylic transfer and palladium catalyzed coupling reactions. (authors) 14 refs.

  18. The recovery of tin, and the production of niobium pentoxide and potassium tantalum fluoride, from a tin slag

    International Nuclear Information System (INIS)

    Iorio, G.; Tyler, M.S.

    1987-01-01

    This report describes the results of testwork on the recovery of tin, niobium, and tantalum from a tin slag. The slag, which consisted mainly of amorphous silica, with varying amounts of calcuim, magnesium, manganese, iron, and aluminium, contained an average of 8,8 per cent niobium pentoxide and 6,2 per cent tantalum pentoxide. The metallic tin-ion phase was removed from the crushed slag by magnetic separation. The slag was then leached with hydrochloric acid to remove magnesium, calcium, aluminium, iron, manganese, and the remainder of the tin. Leaching with sodium hydroxide for the removal of silica and phosphorous was followed by a final leach with hydrochloric acid for the removal of sodium. The upgraded concentrate thus obtained was purified by leaching with hydrofluoric acid, solvent extraction of niobium and tantalum into tri-n-butyl phosphate and methyl isobutyl ketone, and selective stripping of niobium with sulphuric acid and tantalum with ammonium floride. Niobium pentoxide and potassium tantalum fluoride were then precipitated by the addition of ammonium hydroxide and potassium fluoride to the respective strip liquors. The overall recoveries in the upgraded concentrate were 98 per cent for tantalum and 92 per cent for niobium. Dissolutions and recoveries of over 99 per cent were obtained for both tantalum and niobium in the purification steps. The niobium pentoxide and potassium tantalum fluoride precipitates obtained were of high purity

  19. Effect of Graphene Addition on Mechanical Properties of TiN

    International Nuclear Information System (INIS)

    Shon, In-Jin; Yoon, Jin-Kook; Hong, Kyung-Tae

    2017-01-01

    Despite of many attractive properties of TiN, the current concern about the TiN focuses on its low fracture toughness below the ductile-brittle transition temperature. To improve its mechanical properties, the approach generally utilized has been the addition of a second phase to form composites and to make nanostructured materials. In this respect, highly dense nanostructured TiN and TiN-graphene composites were obtained within two min at 1250 ℃. The grain size of TiN was reduced remarkably by the addition of graphene. The addition of graphene to TiN simultaneously improved the fracture toughness and hardness of TiN-graphene composite due to refinement of TiN and deterring crack propagation by graphene. This study demonstrates that the graphene can be an effective reinforcing agent for improved hardness and fracture toughness of TiN composites.

  20. Effect of Graphene Addition on Mechanical Properties of TiN

    Energy Technology Data Exchange (ETDEWEB)

    Shon, In-Jin [Chonbuk National University, Jeonju (Korea, Republic of); Yoon, Jin-Kook; Hong, Kyung-Tae [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

    2017-03-15

    Despite of many attractive properties of TiN, the current concern about the TiN focuses on its low fracture toughness below the ductile-brittle transition temperature. To improve its mechanical properties, the approach generally utilized has been the addition of a second phase to form composites and to make nanostructured materials. In this respect, highly dense nanostructured TiN and TiN-graphene composites were obtained within two min at 1250 ℃. The grain size of TiN was reduced remarkably by the addition of graphene. The addition of graphene to TiN simultaneously improved the fracture toughness and hardness of TiN-graphene composite due to refinement of TiN and deterring crack propagation by graphene. This study demonstrates that the graphene can be an effective reinforcing agent for improved hardness and fracture toughness of TiN composites.

  1. Synthesis of (131)I-labeled-[(131)I]iodo-17-allylamino-17-demethoxy geldanamycin ([(131)I]iodo-17-AAG) and its biodistribution in mice.

    Science.gov (United States)

    Daozhen, Chen; Lu, Liu; Min, Yang; Xinyu, Jiang; Ying, Huang

    2007-10-01

    The aim of this study was to examine the radioiodinating condition of 17-allylamino-17-demethoxy geldanamycin (17-AAG) and observe its biodistribution in the hepatoma cell line HepA tumorearing ICR mice for understanding the possibility of its application in nuclear medicine. [(131)I]iodo-17-AAG was prepared by the reaction of 17-AAG with Na[(131)I] in the presence of hydrogen peroxide. [(131)I]iodo-17-AAG was purified by high-performance liquid chromatography (HPLC). The stability of [(131)I]iodo-17-AAG was measured by thin-layer chromatography (TLC). The distributions in HepA tumor-bearing ICR mice at 0.5, 1, 4, 8, 24, and 48 hours after injection of [(131)I]iodo-17-AAG were measured. Tumor uptake studies were performed in HepA tumor-bearing ICR mice. The labeling yield was over 83%. The radiochemical purity of [(131)I]iodo-17-AAG was 99.6% after purification. The specific activity was greater than 4 Ci/micromol. The labeled compound was stable for at least 120 hours in saline at 4 degrees C. It was initially in blood at 5 minutes with 4.79% of injected dose per g of tissue (%ID/g), and then dropped 0.33% ID/g at 24 hours. The uptake in liver, lung, and kidney at 4.44% ID/g, 2.03% ID/g, and 2.17% ID/g decreased with time, and less than 1% ID/g was measured after 24 hours in those organs. There was rapid tumor uptake, which reached 1.26% ID/g at 0.5 hours, the highest uptake at 8 hours. Yet, the [(131)I]iodo-17-AAG in the contralateral muscle was at a low level during the 48 hours. The tumor-contralateral muscle (T/CM) radioactivity ratio for [(131)I]iodo-17-AAG remained constant at all time points. [(131)I]iodo-17-AAG can be efficiently radiolabeled at high specific activity, purified by HPLC and stored with little radiolysis at this specific activities. [(131)I]iodo-17-AAG is a promising radiopharmaceutical in nuclear medicine, especially for tumor-targeted radionuclide brachytherapy.

  2. Treatment of hyperthyroidism with /sup 131/I

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, I [Kumamoto Univ. (Japan); Tsuchikame, N; Katayama, K

    1980-05-01

    /sup 131/I therapy for hyperthyroidism is limited to those over middle age, women who do not want to bear a child, those in whom drugs are ineffective, those who relapse after operation, and those with severe complications. As to young patients, this therapy is limited to those in whom drugs of operation is ineffective. Basic line of absorbed doses is 5,000 rad. As to histological and immunological changes in the thyroid gland after this therapy, a relationship between pathogenesis of hypothyroidism and immunological mechanism must be discussed in future. The recovery rate of hyperthyroidism by this therapy was high (60 - 95%). The reported incidences of hypothyroidism after this therapy for 10 years were 12%, 15%, 29% and 67%. The maximum fault in this therapy is to induce hypothyroidism. Though the incidences of thyroid cancer, leukemia, and malformation after this therapy are not different from their spontaneous occurrence rates, clinical cases must be followed and observed strictly in future. Excepting this therapy, antithyroid drugs and operation are effective for this disease. Therefore, the therapy which is the most advantageous for the patients must be performed.

  3. Quality control of 131I treatment of graves' disease

    International Nuclear Information System (INIS)

    Liu Zeng; Liu Guoqiang

    2009-01-01

    To make a preliminary quality control (QC) criteria and apply on the various stages of clinic 131 I treatment of Graves' disease in order to decrease the early happening of hypothyroidism and enhance the onetime 131 I cure rate of Graves' disease, the quality control criteria in the stochastic outpatient with 131 I treatment, such as plan of the indication, contraindication, method of treatment, matters needing attention, follow-up observation and curative effect appraisal, patient selection, RAIU, thyroid gland weight measurement and 131 I dose criteria for the various steps of 131 I medication were determined. The 131 I treatment effects of Graves' disease including the once-cure rate, the improving rate, duplicate cure rate and the early happening rate of hypothyroidism were analyzed in patients with applying QC and without QC ccriteria. The results showed that the oncecure rate in patients with applying QC criteria was increased from 76.6% to 90.9% (P≤0.01); the improving rate was decreased from 12.2% to 7.0% (P≤0.01); the duplicate cure rate was increased from 90.1% to 93.0% (P>0.05); the early happening rate of hypothyroidism was decreased from 11.0% to 2.1% (P≤0.01). The 131 I treatment of Graves' disease applying with QC criteria had tremendously improved the oncecure rate and decreased the early happening of hypothyroidism rate. (authors)

  4. Internal Contamination by 131I in nuclear medicine department

    International Nuclear Information System (INIS)

    Chahed, N.; Mtimet, S.; Hammami, H.; Mhiri, A.

    1998-01-01

    Therapeutic applications in nuclear medicine use high activities of 131 I in sodium iodine liquid from which is volatile at ambient temperature. Besides external exposure there is, for the nuclear medicine personnel, an internal exposure risk induced by 131 iodine inhalation. So we tried to assess this risk among the personnel in a nuclear medicine department. We used direct method for measuring 131 radioactivity in vivo by external counting. Gamma ray detector with a Nal ( TI ) probe positioned near the thyroid gland allows investigation of 131 radioactivity. We realised 34 measurements among the personnel, two times at an interval of one month. The results indicate that an 131 iodine internal contamination is found. Estimated thyroid activities were ranging from 35 to 132 Bq. The highest activities has been found in the thyroid of the technicians involved in the administration of 131 iodine therapy. Therefore this values are lower than norms. This study must lead to the implementation control of the 131 iodine internal contamination in order to optimise the personnel protection in nuclear medicine departments (author)

  5. Effect of 131I therapy on outcomes of Graves' ophthalmopathy

    International Nuclear Information System (INIS)

    Wang Renfei; Tan Jian; Zhang Guizhi; Yin Liang

    2011-01-01

    Objective: To analyze the correlation between the therapeutic effect of Graves' hyperthyroidism and the outcomes of Graves' ophthalmopathy after 131 I therapy, and to explore the effect of 131 I treatment on turnout of Graves' ophthalmopathy. Methods: Six hundreds and fifty-two patients of Graves' disease accompanied with Graves' ophthalmopathy, received one-time 131 I treatment according to routine procedure. We recorded exophthalmometer readings, the signs and symptoms of eyes before therapy. Regular follow-up and appraisal of curative effect were carried out. Results: At least six months after 131 I therapy, the effective rate of Graves' hyperthyroidism and Graves' ophthalmopathy were 94.3% and 73.3% respectively. The total effective rate of hyperthyroidism with ophthalmopathy was 71.2%. There was a significant correlation between the prognosis of Graves' ophthalmopathy and therapeutic efficacy of hyperthyroidism (r=0.302, P 131 I therapy (χ 2 =0.296, P>0.05). Conclusions: The key to treat Graves' ophthalmopathy is the cure of Graves' hyperthyroidism through 131 I therapy. The timely diagnosis and replacement treatment of hypothyroidism can effectively avoid the aggravation of Graves' ophthalmopathy after 131 I therapy. (authors)

  6. Synthesis, labelling and biodistribution of N-isopropyl 131I-p-iodoamhetamine (131IAMP)

    International Nuclear Information System (INIS)

    Godoy, N.; Reveco, P.; Mena, P.; Gil, M.C.

    1986-01-01

    It is possible to synthesize N-isopropyl-p-iodoamphetamine (IAMP) through differents schemes, being the most feasible the iodination of phenylacetic acid. The labelling of this compound with radioidine, by isotope exchange in presence or absence of Cu (II) as catalyst, presents less activity concentration in brain than using Cu (II) with an excess of ascorbic acid as reducing agent of Cu (II). The use of ascorbic acid in excess allow the formation of Cu (I) in-situ, which may form an Ar-Cu-I complex, favouring the isotope nucleophilic substitution reaction, obtaining 131 IAMP higher radiochemical purity and better cerebral uptake. (Author)

  7. The highest spin discrete levels in 131,132Ce

    International Nuclear Information System (INIS)

    Paul, E S; Choy, P T W; Andreoiu, C; Boston, A J; Evans, A O; Fox, C; Gros, S; Nolan, P J; Rainovski, G; Sampson, J A; Scraggs, H C; Walker, A; Appelbe, D E; Joss, D T; Simpson, J; Gizon, J; Astier, A; Buforn, N; Prevost, A; Redon, N; Stezowski, O; Nyako, B M; Sohler, D; Timar, J; Zolnai, L; Bazzacco, D; Lunardi, S; Petrache, C M; Bednarczyk, P; Curien, D; Kintz, N; Ragnarsson, I

    2006-01-01

    The three superdeformed (SD) bands in 132 Ce and the two SD bands in 131 Ce have been extended to higher spin following experiments with the EUROBALL IV spectrometer. The two SD bands in 131 Ce have been linked together. However, despite the relatively high population intensity of the bands (up to 5% of the respective channel), it has not been possible to unambiguously link any of the five SD bands into the low-spin, normally deformed structures of 131,132 Ce

  8. Chapter 5: Measurements of iodine-131 in milk supplies

    International Nuclear Information System (INIS)

    Duggleby, J.C.; Kotler, L.H.; Wilks, M.J.; Wise, K.N.

    1974-01-01

    As with previous series of French nuclear tests in Polynesia, a program was instituted to monitor major milk supplies for iodine-131. This program extended from 25 July to 23 October 1973, and was terminated only after there was no further possibility of iodine-131 reaching the milk supplies. The program covered the nine major population centres and effectively monitored the milk consumed by 80 per cent of the entire Australian population. The method employed for iodine-131 assay of milk supplies is described, and the final results obtained are presented. (author)

  9. Nursing of patients with hyperthyroidism treated by using iodine-131

    International Nuclear Information System (INIS)

    Chen Dongju; Cao Guoxiang

    2002-01-01

    Hyperthyroidism was a common endocrine disease, its clinic treatment mainly include anti thyroid drug treatment, surgical operation and iodine-131 therapy. The latter have unique superiority, which was adapted by clinic doctors. The nursing method was distinguished from that of others because the principle of iodine-131 therapy was different from other therapy in course of the treatment of hyperthyroidism. Combining the nursing experiences with related documents, this article was about to sum up briefly the nursing and matters needing attention in course of treatment of iodine-131 in patients with hyperthyroidism

  10. Current status of radioiodine (131I) treatment of hyperthyroidism

    International Nuclear Information System (INIS)

    Becker, D.V.; Hurley, J.R.

    1982-01-01

    Radioiodine appears to be increasingly selected as the primary form of therapy for most hyperthyroid adults. Some controversy exists concerning the use of I-131 in children and adolescents as well as in some patients with toxic nodular goiter. The technical aspects of radioiodine administration reviewed in this chapter include the biologic basis of I-131 use, dose strategies, measurement and evaluation of radioiodine parameters, and I-125 treatment of hyperthyroidism. The management of patients before and after I-131 treatment is discussed as well as posttreatment hypothyroidism and complications of radioiodine treatment

  11. Migration of radionuclide I-131 through a clayey porous matrix

    International Nuclear Information System (INIS)

    Hamlat, M.S.

    1996-01-01

    The chemical and physical behavior of the radiotracer I-131 through a porous matrix are described. The study was evaluated using the laboratory column, which contains porous soils. The collected activities have been measured by gamma counting with a NaI(Tl) detector. The indicators were observed and analyzed by using the one dimension mass transport equation. The solution was utilized to interpret the obtaining experimental data. The experimental values of I-131 are in agreement with those calculated by the model. However, the utilization of (I-131) in the punctual hydrogeological studies is proved. (author). 5 refs., 2 figs., 2 tabs

  12. Corrosion of steels in molten gallium (Ga), tin (Sn) and tin lithium alloy (Sn–20Li)

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, Masatoshi, E-mail: kondo.masatoshi@nr.titech.ac.jp [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8550 (Japan); Ishii, Masaomi [Department of Nuclear Engineering, School of Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka-shi, Kanagawa 259-1292 (Japan); Muroga, Takeo [Department of Helical Plasma Research, National Institute for Fusion Science, Toki, Gifu 502-5292 (Japan)

    2015-10-15

    Graphical abstract: Corrosion of RAFM steel, JLF-1, in liquid Sn–20Li was caused by the formation of Fe-Sn alloyed layer. - Highlights: • The corrosion tests were performed for the reduced activation ferritic martensitic steel JLF-1 and the austenitic steel SUS316 in liquid Ga, Sn and Sn-20Li at 873 K up to 750 h. • The weight loss of the specimens exposed to liquid Ga, Sn and Sn-20Li was evaluated. • The corrosion of the steels in liquid Ga was caused by the alloying reaction between Ga and Fe on the steel surface. • The corrosion of the steels in liquid Sn was caused by the alloying reaction between Sn and Fe on the steel surface. • The corrosion of the steels in liquid Sn-20Li was caused by the formation of the Fe-Sn alloyed layer and the diffusion of Sn and Li into the steel matrix. - Abstract: The compatibility of steels in liquid gallium (Ga), tin (Sn) and tin lithium alloy (Sn–20Li) was investigated by means of static corrosion tests. The corrosion tests were performed for reduced activation ferritic martensitic steel JLF-1 (JOYO-HEAT, Fe–9Cr–2W–0.1C) and austenitic steel SUS316 (Fe–18Cr–12Ni–2Mo). The test temperature was 873 K, and the exposure time was 250 and 750 h. The corrosion of these steels in liquid Ga, Sn and Sn–20Li alloy was commonly caused by the formation of a reaction layer and the dissolution of the steel elements into the melts. The reaction layer formed in liquid Ga was identified as Fe{sub 3}Ga from the results of metallurgical analysis and the phase diagram. The growth rate of the reaction layer on the JLF-1 steel showed a parabolic rate law, and this trend indicated that the corrosion could be controlled by the diffusion process through the layer. The reaction layer formed in liquid Sn and Sn–20Li was identified as FeSn. The growth rate had a linear function with exposure time. The corrosion in Sn and Sn–20Li could be controlled by the interface reaction on the layer. The growth rate of the layer formed

  13. Corrosion of steels in molten gallium (Ga), tin (Sn) and tin lithium alloy (Sn–20Li)

    International Nuclear Information System (INIS)

    Kondo, Masatoshi; Ishii, Masaomi; Muroga, Takeo

    2015-01-01

    Graphical abstract: Corrosion of RAFM steel, JLF-1, in liquid Sn–20Li was caused by the formation of Fe-Sn alloyed layer. - Highlights: • The corrosion tests were performed for the reduced activation ferritic martensitic steel JLF-1 and the austenitic steel SUS316 in liquid Ga, Sn and Sn-20Li at 873 K up to 750 h. • The weight loss of the specimens exposed to liquid Ga, Sn and Sn-20Li was evaluated. • The corrosion of the steels in liquid Ga was caused by the alloying reaction between Ga and Fe on the steel surface. • The corrosion of the steels in liquid Sn was caused by the alloying reaction between Sn and Fe on the steel surface. • The corrosion of the steels in liquid Sn-20Li was caused by the formation of the Fe-Sn alloyed layer and the diffusion of Sn and Li into the steel matrix. - Abstract: The compatibility of steels in liquid gallium (Ga), tin (Sn) and tin lithium alloy (Sn–20Li) was investigated by means of static corrosion tests. The corrosion tests were performed for reduced activation ferritic martensitic steel JLF-1 (JOYO-HEAT, Fe–9Cr–2W–0.1C) and austenitic steel SUS316 (Fe–18Cr–12Ni–2Mo). The test temperature was 873 K, and the exposure time was 250 and 750 h. The corrosion of these steels in liquid Ga, Sn and Sn–20Li alloy was commonly caused by the formation of a reaction layer and the dissolution of the steel elements into the melts. The reaction layer formed in liquid Ga was identified as Fe 3 Ga from the results of metallurgical analysis and the phase diagram. The growth rate of the reaction layer on the JLF-1 steel showed a parabolic rate law, and this trend indicated that the corrosion could be controlled by the diffusion process through the layer. The reaction layer formed in liquid Sn and Sn–20Li was identified as FeSn. The growth rate had a linear function with exposure time. The corrosion in Sn and Sn–20Li could be controlled by the interface reaction on the layer. The growth rate of the layer formed in

  14. Comparative study of 131I with 131I plus lithium carbonate in the treatment of Graves' hyperthyroidism

    International Nuclear Information System (INIS)

    Kang Yuguo; Kuang Anren; Guan Changtian

    2003-01-01

    Objective: To evaluate the effects of lithium carbonate on serum TSH, FT 3 , FT 4 and thyroid mass volume in patients with Graves' hyperthyroidism treated with 131 I. Methods: Thirty patients with newly diagnosed, untreated Graves' disease (GD) and nonsevere or absent Graves' ophthalmopathy, were randomly assigned to group 1 and group 2. The 1st group was treated with 131 I therapy only, the 2nd group with 131 I plus lithium carbonate. All subjects were evaluated for changes in serum TSH, FT 3 and FT 4 as well as thyroid mass volume at the 7, 14, 30 d after 131 I therapy. Differences between the two groups in thyroid mass volume, serum FT 4 , FT 3 , and TSH levels at each interval were evaluated by ANCOVA. Results: Serum FT 4 and FT 3 levels increased shortly after 131 I therapy only in group 1, and decreased in group 2. The differences of serum FT 3 and FT 4 levels between the two groups were significant. Conclusion: It is important for GD patients to accept lithium carbonate treatment and 131 I therapy simultaneously in order to decrease the serum FT 3 and FT 4 levels caused by 131 I therapy

  15. Combinatorial study of zinc tin oxide thin-film transistors

    Science.gov (United States)

    McDowell, M. G.; Sanderson, R. J.; Hill, I. G.

    2008-01-01

    Groups of thin-film transistors using a zinc tin oxide semiconductor layer have been fabricated via a combinatorial rf sputtering technique. The ZnO :SnO2 ratio of the film varies as a function of position on the sample, from pure ZnO to SnO2, allowing for a study of zinc tin oxide transistor performance as a function of channel stoichiometry. The devices were found to have mobilities ranging from 2to12cm2/Vs, with two peaks in mobility in devices at ZnO fractions of 0.80±0.03 and 0.25±0.05, and on/off ratios as high as 107. Transistors composed predominantly of SnO2 were found to exhibit light sensitivity which affected both the on/off ratios and threshold voltages of these devices.

  16. Electronegativity-dependent tin etching from thin films

    Energy Technology Data Exchange (ETDEWEB)

    Pachecka, M., E-mail: m.pachecka@utwente.nl; Sturm, J. M.; Kruijs, R. W. E. van de; Lee, C. J.; Bijkerk, F. [Industrial Focus Group XUV Optics, MESA+ Institute for Nanotechnology, University of Twente, Drienerlolaan 5, Enschede (Netherlands)

    2016-07-15

    The influence of a thin film substrate material on the etching of a thin layer of deposited tin (Sn) by hydrogen radicals was studied. The amount of remaining Sn was quantified for materials that cover a range of electronegativities. We show that, for metals, etching depends on the relative electronegativity of the surface material and Sn. Tin is chemically etched from surfaces with an electronegativity smaller than Sn, while incomplete Sn etching is observed for materials with an electronegativity larger than Sn. Furthermore, the amount of remaining Sn increases as the electronegativity of the surface material increases. We speculate, that, due to Fermi level differences in the material’s electronic structure, the energy of the two conduction bands shift such that the availability of electrons for binding with hydrogen is significantly reduced.

  17. Gap enhancement in phonon-irradiated superconducting tin films

    International Nuclear Information System (INIS)

    Miller, N.D.; Rutledge, J.E.

    1982-01-01

    We have measured the current-voltage (I-V) characteristics of tin-tin tunnel junctions driven out of equilibrium by a flux of near-thermal phonons from a heater. The reduced ambient temperature was T/T/sub c/ = 0.41. The nonequilibrium I-V curves are compared to equilibrium thermal I-V curves at an elevated temperature chosen to match the total number of quasiparticles. The nonequilibrium curves show a smaller current near zero bias and a larger gap than the thermal curves. This is the first experimental evidence of phonon-induced gap enhancement far below T/sub c/. The results are discussed in terms of the coupled kinetic equations of Chang and Scalapino

  18. TDPAC characterization of tin oxides using 181Ta

    International Nuclear Information System (INIS)

    Moreno, M.S.; Desimoni, J.; Requejo, F.G.; Renteria, M.; Bibiloni, A.G.

    1991-01-01

    In connection with a general study of the evolution of tin-oxygen thin films, we report here on the hyperfine interactions of 181 Ta substitutionally replacing tin in the isolated phases SnO and SnO 2 . For this purpose, pure SnO pressed powder and a thin SnO 2 film were implanted with 181 Hf. In both cases, unique quadrupole frequencies were found after thermal annealing treatments. The results indicate that the following hyperfine parameters: ν Q =740.6(2.1) MHz, η=0.07(2) and ν Q =971.5(1.9) MHz, η=0.72(1) characterize 181 Ta and SnO and SnO 2 , respectively. (orig.)

  19. Direct Reaction Experimental Studies with Beams of Radioactive Tin Ions

    Energy Technology Data Exchange (ETDEWEB)

    Jones, K. L. [University of Tennessee, Knoxville (UTK); Ahn, S.H. [University of Tennessee, Knoxville (UTK); Allmond, James M [ORNL; Ayres, A. [University of Tennessee, Knoxville (UTK); Bardayan, Daniel W [ORNL; Baugher, T. [Michigan State University, East Lansing; Bazin, D. [Michigan State University, National Superconducting Cyclotron Laboratory (NSCL); Beene, James R [ORNL; Berryman, J. S. [Michigan State University, East Lansing; Bey, A. [University of Tennessee, Knoxville (UTK); Bingham, C. R. [University of Tennessee, Knoxville (UTK); Cartegni, L. [University of Tennessee, Knoxville (UTK); Chae, K. Y. [University of Tennessee, Knoxville (UTK)/Sungkyunkwan University, Korea; Cizewski, J. A. [Rutgers University; Gade, A. [Michigan State University, National Superconducting Cyclotron Laboratory (NSCL); Galindo-Uribarri, Alfredo {nmn} [ORNL; Garcia-Ruiz, R.F. [Instituut voor Kernen Stralingsfysica, KU Leuven, B-3001, Leuven, Belgium; Grzywacz, Robert Kazimierz [ORNL; Howard, Meredith E [ORNL; Kozub, R. L. [Tennessee Technological University (TTU); Liang, J Felix [ORNL; Manning, Brett M [ORNL; Matos, M. [Louisiana State University; McDaniel, S. [Michigan State University, East Lansing; Miller, D. [University of Tennessee, Knoxville (UTK); Nesaraja, Caroline D [ORNL; O' Malley, Patrick [Rutgers University; Padgett, S [University of Tennessee, Knoxville (UTK); Padilla-Rodal, Elizabeth [Universidad Nacional Autonoma de Mexico (UNAM); Pain, Steven D [ORNL; Pittman, S. T. [University of Tennessee (UTK) and Oak Ridge National Laboratory (ORNL); Radford, David C [ORNL; Ratkiewicz, Andrew J [ORNL; Schmitt, Kyle [ORNL; Smith, Michael Scott [ORNL; Stracener, Daniel W [ORNL; Stroberg, S. [Michigan State University, East Lansing; Tostevin, Jeffrey A [ORNL; Varner Jr, Robert L [ORNL; Weisshaar, D. [Michigan State University, East Lansing; Wimmer, K. [Michigan State University, National Superconducting Cyclotron Laboratory (NSCL)/Central Michigan University; Winkler, R. [Michigan State University, East Lansing

    2015-01-01

    The tin chain of isotopes provides a unique region in which to investigate the evolution of single-particle structure, spreading from N = 50 at Sn-100, through 10 stable isotopes and the N = 82 shell closure at Sn-132 out into the r-process path. Direct reactions performed on radioactive ion beams are sensitive spectroscopic tools for studying exotic nuclei. Here we present one experiment knocking out neutrons from tin isotopes that are already neutron deficient and two reactions that add a neutron to neutron-rich Sn-130. Both techniques rely on selective particle identification and the measurement of gamma rays in coincidence with charged ions. We present the goals of the two experiments and the particle identification for the channels of interest. The final results will be presented in future publications.

  20. Configuration interaction in charge exchange spectra of tin and xenon

    Science.gov (United States)

    D'Arcy, R.; Morris, O.; Ohashi, H.; Suda, S.; Tanuma, H.; Fujioka, S.; Nishimura, H.; Nishihara, K.; Suzuki, C.; Kato, T.; Koike, F.; O'Sullivan, G.

    2011-06-01

    Charge-state-specific extreme ultraviolet spectra from both tin ions and xenon ions have been recorded at Tokyo Metropolitan University. The electron cyclotron resonance source spectra were produced from charge exchange collisions between the ions and rare gas target atoms. To identify unknown spectral lines of tin and xenon, atomic structure calculations were performed for Sn14+-Sn17+ and Xe16+-Xe20+ using the Hartree-Fock configuration interaction code of Cowan (1981 The Theory of Atomic Structure and Spectra (Berkeley, CA: University of California Press)). The energies of the capture states involved in the single-electron process that occurs in these slow collisions were estimated using the classical over-barrier model.

  1. Analysis of pelvic 131I uptake after 131I whole body scan in patients with thyroid cancer

    International Nuclear Information System (INIS)

    Kou Ying; Liu Jianzhong; Hao Xinzhong; Wu Lixiang; Lu Keyi; Yang Suyun; Shi Xiaoli; Hu Tingting

    2014-01-01

    Objective: To analyze and explore the possible mechanism for pelvic 131 I uptake after 131 I post treatment whole body scan (Rx-WBS)in patients with differentiated thyroid cancer. Methods: (1) Data were retrospectively reviewed from 168 female patients with differentiated thyroid cancer (everyone has a Rx-WBS). (2) 46 patients were accepted by analyzing the characteristics of Rx-WBS and combing with some inclusion criteria,and then followed up. Results: Among the 46 patients (46 positions accumulated 131 I) with significant pelvic 131 I uptake, 6 patients had two reasons leading to pelvic 131 I uptake, and 2 patients had no specific reason. Among the 50 reasons for pelvic 131 I uptake, 41 reasons related with uterus, 3 reasons related to rectum, 5 related to bladder and 1 related to ovarian chocolate cyst. Among the 41 reasons related to uterus, by combining the examinations of SPECT/CT, ultrasound, CT and the follow-up results, 18 were uterine leiomyomas, 9 were intrauterine devices, 2 were endometrial thickening, 3 were uterine cavity effusion, 7 were menstrual periods, 1 were uterine adenomyosis, 1 were gestational sac. Conclusions: (1) In the Rx-WBS of female, the significant pelvic 131 I uptake is generally caused by uterus, but not bladder. And it usually means gynecological disease, especially uterine leiomyomas when excluding physiological factors. (2) It is generally easy to differentiate bladder from rectum because they have different characteristic features of the pelvic 131 I uptake. (3) SPECT/CT plays a very important role in locating 131 I uptake in uterus. (authors)

  2. Conversion electron Moessbauer spectroscopic studies on the chemical states of surface layers of corroded tin plates and tin-coated iron plates

    International Nuclear Information System (INIS)

    Kato, Akinori; Endo, Kazutoyo; Sano, Hirotoshi

    1980-01-01

    By means of the conversion electron Moessbauer spectroscopy (CEMS), we studied surface layers of ''tin'' plates and tin-coated iron plates corroded by various acids. Transmission Moessbauer spectra and X-ray diffraction patterns were also measured. Metastannic acid was formed, when the ''tin'' plate was corroded by nitric acid solution. In corrosion by phosphoric acid solution, the X-ray diffractometry revealed the formation of tin(IV) pyrophosphate. In corrosion by various organic acid solutions, the formation of oxides was identified by the 119 Sn CEMS, but not by the X-ray diffractometry because of the too thin corrosion layer. In corrosion of tin-coated iron plates, maleic acid, malonic acid, formic acid, and oxalic acid were used. It was determined by CEMS that the corrosion products caused by these acids were tin(IV) oxides, although they could not be identified by the X-ray diffractometry. CEMS also confirmed that the surface of uncorroded tin-coated iron plate was already oxidized by air. Colorimetric determinations of Sn and Fe dissolved from tin-coated iron plates to various acid solutions confirmed that maleic acid had the strongest corrosion effect among the organic acids studied. (author)

  3. Diffusion of tin in germanium: A GGA+U approach

    KAUST Repository

    Tahini, H. A.; Chroneos, Alexander; Grimes, R. W.; Schwingenschlö gl, Udo

    2011-01-01

    Density functional theory calculations are used to investigate the formation and diffusion of tin-vacancy pairs (SnV) in germanium(Ge). Depending upon the Fermi energy, SnV pairs can form in neutral, singly negative, or doubly negative charged states. The activation energies of diffusion, also as function of the Fermi energy, are calculated to lie between 2.48-3.65 eV, in agreement with and providing an interpretation of available experimental work.

  4. Tin (Sn) for enhancing performance in silicon CMOS

    KAUST Repository

    Hussain, Aftab M.; Fahad, Hossain M.; Singh, Nirpendra; Sevilla, Galo T.; Schwingenschlö gl, Udo; Hussain, Muhammad Mustafa

    2013-01-01

    We study a group IV element: tin (Sn) by integrating it into silicon lattice, to enhance the performance of silicon CMOS. We have evaluated the electrical properties of the SiSn lattice by performing simulations using First-principle studies, followed by experimental device fabrication and characterization. We fabricated high-κ/metal gate based Metal-Oxide-Semiconductor capacitors (MOSCAPs) using SiSn as channel material to study the impact of Sn integration into silicon. © 2013 IEEE.

  5. Tin (Sn) for enhancing performance in silicon CMOS

    KAUST Repository

    Hussain, Aftab M.

    2013-10-01

    We study a group IV element: tin (Sn) by integrating it into silicon lattice, to enhance the performance of silicon CMOS. We have evaluated the electrical properties of the SiSn lattice by performing simulations using First-principle studies, followed by experimental device fabrication and characterization. We fabricated high-κ/metal gate based Metal-Oxide-Semiconductor capacitors (MOSCAPs) using SiSn as channel material to study the impact of Sn integration into silicon. © 2013 IEEE.

  6. Dynamics of implanted muons at low temperatures in white tin

    International Nuclear Information System (INIS)

    Solt, G.; Zimmermann, U.; Herlach, D.

    2008-01-01

    The low temperature lattice site of the implanted μ + particle and its subsequent delocalization at higher temperatures was investigated in single crystal white tin for 2 + was found to reside at the interstitial sites of type d. With increasing temperature thermally activated hopping sets in at T=48±2K, resulting in complete delocalization near 60 K. The activation energy for hopping, E a =113±15meV, is substantially higher than that found previously for the equally tetragonal indium

  7. Diffusion of tin in germanium: A GGA+U approach

    KAUST Repository

    Tahini, H. A.

    2011-10-18

    Density functional theory calculations are used to investigate the formation and diffusion of tin-vacancy pairs (SnV) in germanium(Ge). Depending upon the Fermi energy, SnV pairs can form in neutral, singly negative, or doubly negative charged states. The activation energies of diffusion, also as function of the Fermi energy, are calculated to lie between 2.48-3.65 eV, in agreement with and providing an interpretation of available experimental work.

  8. Radiodiagnostic complexes employing fluorine-containing tin reducing agents

    International Nuclear Information System (INIS)

    Hill, B.K.; Kubik, V.M.

    1977-01-01

    Radiodiagnostic agents for use in mammalian bodies comprising a radiocomplex which is the reaction product of Tc99m-pertechnetate ion, a diagnostic ligand and a tin (II) reducing agent selected from the group consisting of SnF 2 , MSnF 3 , MSn 2 F 5 and mixtures thereof, wherein M is NH 4 , Na, K, Li, Rb or Cs. Radiocomplex precursor compositions and methods of making the radiocomplex and radiodiagnostic agents are described

  9. 33 CFR 159.131 - Safety: Incinerating device.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.131 Safety.... Unitized incineration devices must completely burn to a dry, inert ash, a simultaneous defecation and...

  10. Resveratrol Sensitizes Selectively Thyroid Cancer Cell to 131-Iodine Toxicity

    Directory of Open Access Journals (Sweden)

    Seyed Jalal Hosseinimehr

    2014-01-01

    Full Text Available Background. In this study, the radiosensitizing effect of resveratrol as a natural product was investigated on cell toxicity induced by 131I in thyroid cancer cell. Methods. Human thyroid cancer cell and human nonmalignant fibroblast cell (HFFF2 were treated with 131I and/or resveratrol at different concentrations for 48 h. The cell proliferation was measured by determination of the percent of the survival cells using 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay. Results. Findings of this study show that resveratrol enhanced the cell death induced by 131I on thyroid cancer cell. Also, resveratrol exhibited a protective effect on normal cells against 131I toxicity. Conclusion. This result indicates a promising effect of resveratrol on improvement of cellular toxicity during iodine therapy.

  11. Transient hypothyroidism after 131I treatment of Graves disease

    International Nuclear Information System (INIS)

    Liu Jianfeng; Fang Yi; Zhang Xiuli; Ye Genyao; Xing Jialiu; Zhang Youren

    2003-01-01

    Objective: To evaluate the results of the transient hypothyroidism after 131 I treatment of Graves disease. Methods: A total of 32 transient hypothyroidism patients treated with 131 I for Graves disease were studied and followed up. Results: Transient hypothyroidism occurred within 2-6 months after 131 I treatment and 19 patients were symptomatic. At diagnosis of transient hypothyroidism, T 3 and T 4 levels were decreased had normal, TSH levels were increased, normal or low. Follow-up examination found that 20 patients were normal and 12 patients had relapse of hyperthyroidism. Conclusions: Therapy of Graves disease with low doses of 131 I causes a high incidence of transient hypothyroidism. After recovery of transient hypothyroidism, some patients have relapse of hyperthyroidism

  12. Guidelines on the management of patients treated with iodine-131

    International Nuclear Information System (INIS)

    1993-03-01

    The purpose of these guidelines is to assist health care institutions establish protocols for the management of patients treated with iodine-131. These guidelines are written primarily for the use of Na 131 I in the treatment of benign and malignant thyroid disease. The principles have some application for the use of complex 131 I-labelled radiopharmaceuticals in that the treated patient will become a temporary radiation source and since contamination with body fluids of treated patients must be guarded against. The document outlines radiation protection and logistical concerns associated with the management of 131 I patients before, during and after therapy. These concerns include the safety of health care personnel, visitors, and any other persons who are at risk; and protection of the environment. (L.L.) 23 refs., 2 tabs

  13. The absorption of iodine-131 on a ceramic matrix

    International Nuclear Information System (INIS)

    Han, H.S.; Park, U.J.; Dash, A.

    2004-01-01

    The retention of 131 I on ceramic rod coated with silver nitrate followed by coating with a polyurethane membrane to be applied in brachytherapy was studied. The concentration of silver nitrate (20 g/l), the volume of 131 I as a sodium iodide solution (100 μl), the pH of the reaction mixture (pH 9) etc., were optimized to get a maximum uptake on the ceramic rod. The concentration of coating solution (5%, polyurethane in tetrahydrofuran) was also optimized to obtain a minimum leaching of 131 I activity in normal saline solution. After coating with a polyurethane membrane, the 131 I absorbed on the ceramic rod exhibited low leachability (0.03%). This method can be applied for the preparation of 125 I interstitial sources to be used in eye and prostate cancer therapy. (author)

  14. Get the Facts About Exposure to I-131 Radiation

    Science.gov (United States)

    ... Data Conducting Clinical Trials Statistical Tools and Data Terminology Resources NCI Data Catalog Cryo-EM NCI's Role ... affected by I-131 fallout from nuclear testing. Medical signs —A lump or nodule that an individual ...

  15. Effficacy of 131I therapy hyperthyroidism in adolescent

    International Nuclear Information System (INIS)

    Qin Lan; Wang Junqi; Feng Xuemin; Yin Le

    2004-01-01

    To investigate the possibility of 131 I therapy hyperthyroidism in adolescent, 117 adolescent patients treated with 131 I are analyzed retrospectively. In the first treatment of 131 I, 76 patients gain with euthyroidism (65.0%), 28 patients have remission (23.9%), 13 patients have hypothyroidism (11.0%), the total efficacy is 88.9%. The administered dose to the patients with younger than 14 years is significantly lower than the patients aged from 15 years to 18 years. There is no significantly difference in cure rate or incidence of hypothyroidism between the two groups. The second treatment may improve the cure rate and not exert any significant impact to the incidence of hypothyroidism. Therefore, 131 I treatment hyperthyroidism in younger is efficacious, inexpensive and safe. The dosages given to patients are different between age groups. (authors)

  16. Clinical evaluation of 131I in treatment hyperthyroidism

    International Nuclear Information System (INIS)

    Wang Jing; Deng Jinglan; Qiao Hongqing

    2001-01-01

    The clinical value of 131 I in the treatment of hyperthyroidism is observed. The weight of the thyroid was evaluated by palpation, 131 I was taken orally by one dose method. The dose was calculated by actual absorption of 131 I/per gram of thyroid. 3 - 6 months after drug administration, the symptom, clinical manifestation and the serum hormone of the pituitary-hypothyroid axis were observed. In 105 cases, 80(76.2%) were nearly recovered, among them 16(15.2%) had hypothyroidism in the early period. The all over recovering rate was 91.4% in one dose, but 9(8.6%) were recurred and can be controlled at a second dose. Therefore 131 I for the hyperthyroidism had a high recovering rate, low recurring rate and was very convenient. If prospect on the Chinese effort the controlled, the occurrence of hypothyroidism can be reduced to the acceptable level

  17. High spin structure in 130,131Ba

    International Nuclear Information System (INIS)

    Kaur, Navneet; Kumar, A.; Singh, Amandeep; Kumar, S.; Kaur, Rajbir; Singh, Varinderjit; Behera, B.R.; Singh, K.P.; Singh, G.; Mukherjee, G.; Sharma, H.P.; Kumar, Suresh; Kumar Raju, M.; Madhusudhan Rao, P.V.; Muralithar, S.; Singh, R.P.; Kumar, Rakesh; Madhvan, N.; Bhowmik, R.K.

    2014-01-01

    High spin states of 130,131 Ba have been investigated via fusion evaporation reactions 122 Sn( 13 C,4n) 131 Ba and 122 Sn( 13 C, 5n) 130 Ba at E beam =65 MeV. The level schemes of 130,131 Ba have been extended by placing several new γ transitions. A few interband transitions connecting two negative-parity bands, which are the experimental fingerprints of signature partners, have been established in 130 Ba. Spin and parity of a side band have been assigned in 131 Ba and this dipole band is proposed to have a three-quasiparticle configuration, νh 11/2 x πh 11/2 x πg 7/2 . The observed band structures and nuclear shape evolution as a function of the angular momentum have been discussed in the light of Total-Routhian-Surface calculations. (orig.)

  18. 12 CFR 225.131 - Activities closely related to banking.

    Science.gov (United States)

    2010-01-01

    ...; operation and management of a trust department; international banking; foreign exchange transactions... specialized lending provisions; marketing operations, including research, market development and advertising... Holding Companies Interpretations § 225.131 Activities closely related to banking. (a) Bank management...

  19. 4 CFR 28.131 - Corrective action proceedings.

    Science.gov (United States)

    2010-01-01

    ... Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES GOVERNMENT ACCOUNTABILITY OFFICE PERSONNEL APPEALS BOARD; PROCEDURES APPLICABLE TO CLAIMS CONCERNING EMPLOYMENT PRACTICES AT THE GOVERNMENT ACCOUNTABILITY OFFICE Corrective Action, Disciplinary and Stay Proceedings § 28.131 Corrective action proceedings...

  20. Evaluation on the characteristics of tin-silver-bismuth solder

    Science.gov (United States)

    Xia, Z.; Shi, Y.; Chen, Z.

    2002-02-01

    Tin-silver-bismuth solder is characterized by its lower melting point, good wetting behavior, and good mechanical property for which it is expected to be a new lead-free solder to replace tin-lead solder. In this article, Sn-3.33Ag-4.83Bi solder was investigated concerning its physical, spreading, and mechanical properties under specific conditions. Cooling curves and DSC results showed that it was close to eutectic composition (m.p. 210° 212 °C). Coefficiency of thermal expansion (CTE) of this solder, between that of PCBs and copper substrates, was beneficial to alleviate the thermal mismatch of the substrates. It was also a good electrical and thermal conductor. Using a rosin-based, mildly activated (RMA) flux, a spreading test indicated that SnAgBi solder paste had good solderability. Meanwhile, the solder had high tensile strength and fracture energy. Its fracture mechanism was a mixture of ductile and brittle fracture morphology. The metallographic and EDAX analyses indicated that it was composed of a tin-based solid solution and some intermetallic compound (IMC) that could strengthen the substrate. However, these large needle-like IMCs would cut the substrate and this resulted in the decreasing of the toughness of the solder.

  1. Acid-catalyzed kinetics of indium tin oxide etching

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae-Hyeok; Kim, Seong-Oh; Hilton, Diana L. [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Centre for Biomimetic Sensor Science, Nanyang Technological University, 50 Nanyang Drive, 637553 (Singapore); Cho, Nam-Joon, E-mail: njcho@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Centre for Biomimetic Sensor Science, Nanyang Technological University, 50 Nanyang Drive, 637553 (Singapore); School of Chemical and Biomedical Engineering, Nanyang Technological University, 62 Nanyang Drive, 637459 (Singapore)

    2014-08-28

    We report the kinetic characterization of indium tin oxide (ITO) film etching by chemical treatment in acidic and basic electrolytes. It was observed that film etching increased under more acidic conditions, whereas basic conditions led to minimal etching on the time scale of the experiments. Quartz crystal microbalance was employed in order to track the reaction kinetics as a function of the concentration of hydrochloric acid and accordingly solution pH. Contact angle measurements and atomic force microscopy experiments determined that acid treatment increases surface hydrophilicity and porosity. X-ray photoelectron spectroscopy experiments identified that film etching is primarily caused by dissolution of indium species. A kinetic model was developed to explain the acid-catalyzed dissolution of ITO surfaces, and showed a logarithmic relationship between the rate of dissolution and the concentration of undisassociated hydrochloric acid molecules. Taken together, the findings presented in this work verify the acid-catalyzed kinetics of ITO film dissolution by chemical treatment, and support that the corresponding chemical reactions should be accounted for in ITO film processing applications. - Highlights: • Acidic conditions promoted indium tin oxide (ITO) film etching via dissolution. • Logarithm of the dissolution rate depended linearly on the solution pH. • Acid treatment increased ITO surface hydrophilicity and porosity. • ITO film etching led to preferential dissolution of indium species over tin species.

  2. Tin Whisker Electrical Short Circuit Characteristics. Part 2

    Science.gov (United States)

    Courey, Karim J.; Asfour, Shihab S.; Onar, Arzu; Bayliss, Jon A.; Ludwig, Lawrence L.; Wright, Maria C.

    2009-01-01

    Existing risk simulations make the assumption that when a free tin whisker has bridged two adjacent exposed electrical conductors, the result is an electrical short circuit. This conservative assumption is made because shorting is a random event that has an unknown probability associated with it. Note however that due to contact resistance electrical shorts may not occur at lower voltage levels. In our first article we developed an empirical probability model for tin whisker shorting. In this paper, we develop a more comprehensive empirical model using a refined experiment with a larger sample size, in which we studied the effect of varying voltage on the breakdown of the contact resistance which leads to a short circuit. From the resulting data we estimated the probability distribution of an electrical short, as a function of voltage. In addition, the unexpected polycrystalline structure seen in the focused ion beam (FIB) cross section in the first experiment was confirmed in this experiment using transmission electron microscopy (TEM). The FIB was also used to cross section two card guides to facilitate the measurement of the grain size of each card guide's tin plating to determine its finish.

  3. Three cases of respiratory failure after I-131 radioiodine therapy

    International Nuclear Information System (INIS)

    Watanabe, Ken; Uchiyama, Masayuki; Fukuda, Kunihiko

    2016-01-01

    We report three cases of respiratory failure after I-131 radioiodine therapy. All cases involved relapsed cervical lesions, and two showed edema of the larynx. Emergency tracheostomy was performed to treat the respiratory failure in one case while the others were treated conservatively. All patients showed improvements without after-effects. Patients who undergo I-131 radioiodine therapy, especially those with cervical lesions, should be carefully monitored for this rare complication after treatment. (author)

  4. {sup 131}I treatment of nodular non-toxic goitre

    Energy Technology Data Exchange (ETDEWEB)

    Nygaard, B.; Faber, J.; Hegdeues, L.; Hansen, J.M. [Herlev Hospital (Denmark)

    1996-01-01

    The traditional treatment of a growing nodular non-toxic goitre has for many years been surgical resection or levothyroxine suppressive treatment. During recent years, several studies have reported promising results of {sup 131}I treatment in terms of thyroid size reduction. This review outlines the different treatment modalities on non-toxic nodular goitre with special emphasis on {sup 131}I treatment. By the term nodular goitre the authors include glands with solitary or multiple thyroid nodules with uptake on a scintiscan. At what point of the natural history of non-toxic multinodular goitre {sup 131}I therapy should be used is not clear. In principle, the best result is obtained in smaller goitres and it is possible that the best effect of {sup 131}I is seen if treatment is given to patients with diffuse goitre before these become nodular. However, then there is a potential risk to swing in the direction to where {sup 131}I is used in an indiscriminate way, since the prevalence of non-toxic multinodular goitre is much higher than that of hyperthyroidism. Although we have data on the long-term hazards of {sup 131}I treatment in hyperthyroidism in terms of risk of cancer, we have only follow-up periods of 5 to 10 years for non-toxic goitres in small groups of patients and no data regarding the long-term risk of high-dose {sup 131}I treatment (>600 MBq) for this condition. Ideally, long term randomized studies comparing the effect, side effect and cost-benefit of surgery as opposed to {sup 131}I treatment should be performed. Awaiting this, it is at present mandatory that each individual patient be given a choice of treatment after proper information. 44 refs.

  5. 131I treatment in patients undergoing renal dialysis: our experience

    International Nuclear Information System (INIS)

    Tobarra, Bonifacio; Campos, Pedro A.; Gonzalez Lopez, Antonio; Palma, Juan D.

    2008-01-01

    Radiation Protection issues concerning patients, public and staff must be considered carefully in hemodialysis for chronic renal failure patients scheduled for 131 I high dose therapy. In order to assess the risks related to this medical procedure, hemodialysis clearance of 131 I and contamination measurements were carried out. We have studied 12 hemodialysis procedures corresponding to 2 cases of hyperthyroidism disease (555MBq of 131 I administered) and 3 patients with carcinoma of the thyroid (5550 MBq of 131 I administered). The arterio-venous difference of 131 I across the artificial kidney and dose rate reduction at one meter of patient were measured. Contamination levels of the dialyser machine, filters and tubes were measured after dialysis with a contamination monitor. Direct read-out dosimeters were used to assess the radiation doses to nursery staff involved. The result obtained for mean 131 I clearance in blood was 75±11%. The mean dose rate reduction at one meter of the patient was 58±18%. We also checked that contamination levels for the dialyser machine, filters, tubes and accessories were lower than 10Bq/cm 2 . For the nursery staff the radiation dose was found to be lower than 0.1mSv. (author)

  6. Breast cancer following 131I therapy for hyperthyroidism

    International Nuclear Information System (INIS)

    Hoffman, D.A.; McConahey, W.M.

    1983-01-01

    A retrospective cohort study of women treated for hyperthyroidism at the Mayo Clinic between 1946 and 1964 was conducted to determine if 1,005 women treated with ( 131 I) were at increased risk of breast cancer compared with 2,141 women traced, and a response (death certificate or questionnaire) was received for 99% of the traced women. The average duration of follow-up was 15 years for the 131 I-treated women and 21 years for women treated surgically. No increased risk of breast cancer was observed in the 131 I-treated women (adjusted relative risk . 0.8). No patterns were found of increased breast cancer risk by age at first treatment, by time since treatment, or by total exposure to 131 I. Failure to detect an increased risk of breast cancer in the 131 I-treated women was attributed to the moderately low doses from 131 I therapy and the relatively small number of exposed women. The study also failed to find any increased risk of breast cancer associated with hyperthyroidism

  7. Additional effective dose by patients undergoing NAI-131 capsules therapy

    Energy Technology Data Exchange (ETDEWEB)

    Orlic, M.; Jovanovic, M.; Spasic Jokic, V.; Cuknic, O.; Ilic, Z.; Vranjes Djuric, S. [VINCA - Institute of Nuclear Sciences, Belgrade, Serbia and Montenegro (Yugoslavia)

    2006-07-01

    Capsules or solutions containing Na{sup 131}I are indicated for the therapy of some thyroid carcinomas such as functioning metastatic papillary or follicular carcinoma of the thyroid; and for the treatment of hyperthyroidism (diffuse toxic goiter and single or multiple toxic nodular goiter). The recommended dosage ranges of Na{sup 131}I capsules or solution for the therapy of the average patient (70 kg) are: (3.7-5.55) GBq for ablation of normal thyroid tissue; (3.7-7.4) GBq for subsequent treatments; a (148-370) MBq for hyperthyroidism. The purpose of this paper is to calculate effective dose as a result of iodine-131 capsules remaining in stomach before absorption starts. This result can determine the disadvantage of capsule versus solution containing sodium iodine-131 (Na{sup 131}I) in radionuclide therapy application from radiation protection point of view. The Monte Carlo code MCNP4b was used to model transport of gamma and beta particles emitted by radionuclide {sup 131}I treated as a point source at the bottom of stomach. Absorbed energy per unit transformation in stomach and surrounding organs has been calculated. (authors)

  8. Management of thyroid carcinoma with radioactive 131I

    International Nuclear Information System (INIS)

    Paryani, Shyam B.; Chobe, Rashmi J.; Scott, Walter; Wells, John; Johnson, Douglas; Kuruvilla, Anand; Schoeppel, Sonja; Deshmukh, Abhijit; Miller, Robert; Dajani, Lorraine; Montgomery, Charles Ted; Puestow, Eric; Purcell, John; Roura, Miguel; Sutton, David; Mallett, Ruth; Peer, Jan

    1996-01-01

    Purpose: To evaluate the role of radioactive 131 I in the management of patients with well differentiated carcinoma of the thyroid. Methods and Materials: Between 1965 and 1995, a total of 117 patients with well-differentiated carcinoma of the thyroid underwent either lobectomy or thyroidectomy followed by 100-150 mCi of 131 I. Results: With a median follow-up of 8 years, only four patients (3%) developed a recurrence of their disease. The 5-year actuarial survival was 97% with a 10-year survival of 91%. There were no severe side effects noted after 131 I therapy. Conclusions: Radioactive 131 I is a safe and effective procedure for the majority of patients with well-differentiated thyroid carcinoma. We currently recommend that all patients undergo a subtotal or total thyroidectomy followed by 131 I thyroid scanning approximately 4 weeks after surgery. If the thyroid scan shows no residual uptake and all disease is confined to the thyroid, we recommend following patients with annual thyroid scans and serum thyroglobulin levels. If there is any residual uptake detected in the neck or if the tumor extends beyond the thyroid, we recommend routine thyroid ablation of 100-150 mCi of radioactive 131 I

  9. Determination of total tin in canned food using inductively coupled plasma atomic emission spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Perring, Loic; Basic-Dvorzak, Marija [Department of Quality and Safety Assurance, Nestle Research Centre, P.O. Box 44, Vers chez-les-Blanc, 1000, Lausanne (Switzerland)

    2002-09-01

    Tin is considered to be a priority contaminant by the Codex Alimentarius Commission. Tin can enter foods either from natural sources, environmental pollution, packaging material or pesticides. Higher concentrations are found in processed food and canned foods. Dissolution of the tinplate depends on the of food matrix, acidity, presence of oxidising reagents (anthocyanin, nitrate, iron and copper) presence of air (oxygen) in the headspace, time and storage temperature. To reduce corrosion and dissolution of tin, nowadays cans are usually lacquered, which gives a marked reduction of tin migration into the food product. Due to the lack of modern validated published methods for food products, an ICP-AES (Inductively coupled plasma-atomic emission spectroscopy) method has been developed and evaluated. This technique is available in many laboratories in the food industry and is more sensitive than atomic absorption. Conditions of sample preparation and spectroscopic parameters for tin measurement by axial ICP-AES were investigated for their ruggedness. Two methods of preparation involving high-pressure ashing or microwave digestion in volumetric flasks were evaluated. They gave complete recovery of tin with similar accuracy and precision. Recoveries of tin from spiked products with two levels of tin were in the range 99{+-}5%. Robust relative repeatabilities and intermediate reproducibilities were <5% for different food matrices containing >30 mg/kg of tin. Internal standard correction (indium or strontium) did not improve the method performance. Three emission lines for tin were tested (189.927, 283.998 and 235.485 nm) but only 189.927 nm was found to be robust enough with respect to interferences, especially at low tin concentrations. The LOQ (limit of quantification) was around 0.8 mg/kg at 189.927 nm. A survey of tin content in a range of canned foods is given. (orig.)

  10. Evaluation of the suitability of tin slag in cementitious materials: Mechanical properties and Leaching behaviour

    Science.gov (United States)

    Rustandi, Andi; Wafa' Nawawi, Fuad; Pratesa, Yudha; Cahyadi, Agung

    2018-01-01

    Tin slag, a by-product of tin production has been used in cementitious application. The present investigation focuses on the suitability of tin slag as primary component in cement and as component that substitute some amount of Portland Cement. The tin slags studied were taken from Bangka, Indonesia. The main contents of the tin slag are SiO2, Al2O3, and Fe2O3 according to the XRF investigation. The aim of this article was to study the mechanical behaviour (compressive strength), microstructure and leaching behaviour of tin slag blended cement. This study used air-cooled tin slag that had been passed through 400# sieve to replace Portland Cement with ratio 0, 10, 20, 30, 40 by weight. Cement pastes and tin slag blended cement pastes were prepared by using water/cement ratio (W/C) of 0.40 by weight and hydrated for various curing ages of 3, 7, 14 days The microstructure of the raw tin slag was investigated using Scanning Electron Microscope (SEM). The phase composition of each cement paste was investigated using X-ray Diffraction (XRD). The aim of the leachability test was to investigate the environmental impacts of tin slag blended cement product in the range 4-8 pH by using static pH-dependent leaching test. The result show that the increase of the tin slag content decreasing the mortar compressive strength at early ages. The use of tin slag in cement provide economic benefits for all related industries.

  11. Tin-Silver Alloys for Flip-Chip Bonding Studied with a Rotating Cylinder Electrode

    DEFF Research Database (Denmark)

    Tang, Peter Torben; Pedersen, E.H.; Bech-Nielsen, G.

    1999-01-01

    Electrodeposition of solder for flip-chip bonding is studied in the form of a pyrophosphate/iodide tin-silver alloy bath. The objective is to obtain a uniform alloy composition, with 3.8 At.% silver, over a larger area. This specific alloy will provide an eutectic solder melting at 221°C (or 10°C...... photoresist, have shown a stable and promising alternative to pure tin and tin-lead alloys for flip-chip bonding applications....

  12. Shanghai Futures Exchange Published Draft of Tin and Nickel Futures Contract

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Shanghai Futures Exchange published draft for soliciting opinions for tin and nickel futures contract on its official website on January 19,which implies the marketing time of the long awaited tin and nickel futures is drawing near.According to the draft for soliciting opinions,the transaction unit of tin futures contract is 1tonne/lot,minimum variation unit is 10 yuan/tonne,daily maximum price fluctuation shall

  13. Reformulation of Business Strategies for Increasing Sales of TIN Product Stabilizer at PT Timah Industri

    OpenAIRE

    Sundoyo, Hadi; Hamsal, Mohammad

    2013-01-01

    PT. Timah Industri (PT TI) is a subsidiary of PT. Timah (Persero) Tbk which exploit comparative advantage of its parent company as the second largest tin producer in the world. With these advantages PT TI entered the downstream PVC stabilizer tin base. Starting from the difficulty of selling their products and then raised the question in inventory management. PT TI should immediately take strategic steps to save the tin chemical business continues to lose money from time to time. From the res...

  14. Evaluation of biological analysis program for iodine 131; Avaliacao do programa de bioanalise para Iodo-131

    Energy Technology Data Exchange (ETDEWEB)

    Gaburo, J.C.; Todo, A.S.; Potiens Junior, A.; Oliveira, E.M.; Sordi, G.M.A.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1997-12-31

    A program for the occupational control of internal contamination for the Radioisotopes Division workers of the IPEN-CNEN/SP has been performed by in vitro and in vivo bioassay techniques, every two weeks. From the assessment of the monitoring program, two groups of workers were identified in accordance with their activities and handling frequency {sup 131} I. The groups A and B are exposed five and three days respectively every week. In this program, urinalysis methods, thyroid and whole body measurements have been evaluated over the year. The sampling scheme, performed every two week, was altered for weekly, in order to minimize the interpretation errors and to get a better estimative of the intake. This study also provides and evaluation of the cost for the weekly urinalysis sampling method. (author) 6 refs., 1 fig.; e-mail: janetegc at net.ipen.br

  15. Studies on Nanocrystalline TiN Coatings Prepared by Reactive Plasma Spraying

    Directory of Open Access Journals (Sweden)

    Dong Yanchun

    2008-01-01

    Full Text Available Titanium nitride (TiN coatings with nanostructure were prepared on the surface of 45 steel (Fe-0.45%C via reactive plasma spraying (denoted as RPS Ti powders using spraying gun with self-made reactive chamber. The microstructural characterization, phases constitute, grain size, microhardness, and wear resistance of TiN coatings were systematically investigated. The grain size was obtained through calculation using the Scherrer formula and observed by TEM. The results of X-ray diffraction and electron diffraction indicated that the TiN is main phase of the TiN coating. The forming mechanism of the nano-TiN was characterized by analyzing the SEM morphologies of surface of TiN coating and TiN drops sprayed on the surface of glass, and observing the temperature and velocity of plasma jet using Spray Watch. The tribological properties of the coating under nonlubricated condition were tested and compared with those of the AISI M2 high-speed steel and Al2O3 coating. The results have shown that the RPS TiN coating presents better wear resistance than the M2 high-speed steel and Al2O3 coating under nonlubricated condition. The microhardness of the cross-section and longitudinal section of the TiN coating was tested. The highest hardness of the cross-section of TiN coating is 1735.43HV100 g.

  16. Estimating the Probability of Electrical Short Circuits from Tin Whiskers. Part 2

    Science.gov (United States)

    Courey, Karim J.; Asfour, Shihab S.; Onar, Arzu; Bayliss, Jon A.; Ludwig, Larry L.; Wright, Maria C.

    2010-01-01

    To comply with lead-free legislation, many manufacturers have converted from tin-lead to pure tin finishes of electronic components. However, pure tin finishes have a greater propensity to grow tin whiskers than tin-lead finishes. Since tin whiskers present an electrical short circuit hazard in electronic components, simulations have been developed to quantify the risk of said short circuits occurring. Existing risk simulations make the assumption that when a free tin whisker has bridged two adjacent exposed electrical conductors, the result is an electrical short circuit. This conservative assumption is made because shorting is a random event that had an unknown probability associated with it. Note however that due to contact resistance electrical shorts may not occur at lower voltage levels. In our first article we developed an empirical probability model for tin whisker shorting. In this paper, we develop a more comprehensive empirical model using a refined experiment with a larger sample size, in which we studied the effect of varying voltage on the breakdown of the contact resistance which leads to a short circuit. From the resulting data we estimated the probability distribution of an electrical short, as a function of voltage. In addition, the unexpected polycrystalline structure seen in the focused ion beam (FIB) cross section in the first experiment was confirmed in this experiment using transmission electron microscopy (TEM). The FIB was also used to cross section two card guides to facilitate the measurement of the grain size of each card guide's tin plating to determine its finish .

  17. Radiological Risk for Patients Treated with 131I

    International Nuclear Information System (INIS)

    Chas, J.; Janiak, M.K.; Kowalczyk, A.; Siekierzynski, M.; Dziuk, E.

    2001-01-01

    Full text: Dose equivalents were measured during the three-day therapy with 131 I in patients treated at the Clinic of Endocrinology and Radioisotope Therapy, Central Clinical Hospital, Military University School of Medicine, Warsaw, Poland, for thyroid cancer (supplementary treatment; 21 cases), hyperthyroidism in the Graves-Basedov's disease (18 cases), and toxic nodular goiter (19 cases). The absorbed doses were measured with thermoluminescent dosimeters placed above the jugular incisure and above the pubic symphysis; the readings were used for calculation of the dose equivalent over the thyroid and in the ovaries. Following the radical treatment of thyroid cancer iodine uptake in the thyroid gland was very low and most of the applied 131 I was excreted within one to three days. In our 21 patients who were given on average 2.8 GBq (76 mCi) 131 I and stimulated with TSH (approx. 60 μIU/mL) the mean dose equivalents over the thyroid and in the ovaries were 115±123 mSv and 56±19 mSv, respectively. In comparison, the calculated dose equivalents in the Graves-Basedov's disease patients (424 MBq mean activity of the applied 131 I) and the goiter patients (544 MBq mean activity of the applied 131 I) were approx. 3.5 times higher over the thyroid and approx. 2.5 times lower in the ovaries. No disfunctions of the ovaries were detected in the treated young women. Based on these results it is recommended to stimulate diuresis during the first two-three days after the injection of 131 I. The results also indicate that exposure to ionising radiation of patients treated for various thyroid disorders with 131 I does not lead to the development of clinically detectable non-stochastic effects. (author)

  18. Testicular effects of 131radioiodine therapy for hyperthyroidism

    International Nuclear Information System (INIS)

    Ceccarelli, Claudia; Canale, Domenico; Carolina, Caglieresi; Moschini, Cecilia; Grasso, Lucia; Pinchera, Aldo; Vitti, Paolo

    2005-01-01

    Full text: Little data is available on possible untoward effects of 131 I therapy for hyperthyroidism on gonad male function. FSH, LH, Total Testosterone(T), Inhibin B and spermiogram were evaluated in 15 hyperthyroid males (mean age 38.5+/-6.7 years, m +/- SD) before, and at day 45, month 3, 6 and 12 after 131 I therapy. Mean basal FSH was 5.6 +/- 3.8 mU/ml. After 131 I, FSH remained unchanged in 13 patients. In two, one of whom with basal FSH in the upper normal limits (16.4 mU/ml), a mild increase was observed after therapy. Basal LH and T were in normal range and did not vary significantly after 131 I, but T/LH ratio significantly decreased at month 3 and 6 (basal: 1.34 +/- 0.6; month 3: 0.85 +/- 0.3, p=0.02, month 6: 0.8 +/- 0.1, p= 0.06). Basal Inhibin B values did not vary significantly after 131 I. Basal mean sperm concentration did not differ from that found in a control group of 20 normal men (51.0 +/- 6.9 x 106 E/ml, vs. 57.6 +/- 7.5 x 106 E/ml) and did not vary significantly after 131 I therapy. Sperm progressive motility (SPM) was 39.1+/-4.7 % in hyperthyroid patients and 54.4 +/- 1.8 % in the controls (p=0.02). Ten patients (67%) were asthenospermic (SPM 131 I treatment of hyperthyroidism may account for a marginal and transient damage of Leydig cells, as highlighted by T/LH ratio. The lower SPM and increased theratospermia observed in patients before treatment could be due to hyperthyroidism per se, as suggested by the normalization of SPM in 5/10 patients after therapy. (author)

  19. Unremitted hyperthyroidism following 131I treatment: an analysis of clinical markers in 48 patients

    International Nuclear Information System (INIS)

    Fang Yi; Zhang Xiuli; Liu Jianfeng; Zhang Youren

    2002-01-01

    Objective: To evaluate changes in clinical markers of unremitted hyperthyroidism patients after the first 131 I treatment. Methods: Forth eight unremitted hyperthyroidism patients were selected. Their thyroid function, the peak of 131 I uptake rate and thyroid weight before and after 131 I treatment were compared. Results: TT 3 , TT 4 , TSH were relatively stable and the peak of 131 I uptake rate and thyroid weight were reduced after 131 I treatment. Conclusions: Thyroid volume was reduced after 131 I treatment even if patients' clinical symptoms still existed; the peak of 131 I uptake rate was reduced after 131 I treatment, suggesting that their sensibility to 131 I decreased, so the absorbed dose should be adjusted when the 131 I dosage of second treatment is calculated

  20. Thyroid cancer from occupational exposures to iodine-131

    International Nuclear Information System (INIS)

    Shore, R.E.

    1983-01-01

    Studies of external irradiation, primarily of children, suggest that the thyroid gland is one of the most radiosensitive sites for carcinogenesis. However, it has generally been thought that 131 I confers much less risk (per rad) than external radiation because of its low dose-rate. A review of the epidemiologic literature indicates that age at irradiation is also an important variable in defining thyroid cancer risk, with a lesser risk at older ages. The available human studies are reasonably consistent in affirming that risks following 131 I are small. However, the data on 131 I exposure are too sparse, particularly for childhood exposure, to determine how much of the observed diminution in risk is due to older ages at exposure and how much is attributable to the characteristics of 131 I exposure per se, such as low dose-rate. Since most of the existing studies have inadequacies in design, dose levels, dosimetry or number of subjects, additional studies are needed before the risk assessment of 131 I at lower dose levels in adult workers can be regarded as definitive

  1. Visualization of adrenocortical carcinoma with 131I-Adosterol

    International Nuclear Information System (INIS)

    Maruoka, Shin; Nakamura, Mamoru

    1987-01-01

    There are very few literatures on successful visualization of adrenocortical carcinoma by means of 131 I-iodocholesterol scintigraphy, although many reports have referred to utility of 131 I-iodocholesterol scintigraphy for adrenal disorders. Since 1976, we have experienced 4 cases of adrenocortical carcinoma which were delineated by 131 I-6β-iodomethyl-19-norcholesterol ( 131 I-Adosterol). Three of 4 cases were adrenocortical carcinoma with Cushing's syndrome, and one was adrenocortical carcinoma with adrenogenital syndrome. In 3 cases of cortisol secreting adrenocortical carcinoma, uptake in the tumor and lack of uptake in the contralateral adrenal gland were seen. Faint to moderate uptakes were observed in the 2 cases, but another one showed as high uptake as seen in adenoma. Patient with androgen secreting adrenocortical carcinoma had increased uptake in the tumor and showed faint uptake in the contralateral adrenal gland. Intensity of 131 I-Adosterol uptake in adrenocortical carcinoma seems to depend on the extent of tumor necrosis, cell differentiation and function. (author)

  2. Visualization of adrenocortical carcinoma with /sup 131/I-Adosterol

    Energy Technology Data Exchange (ETDEWEB)

    Maruoka, Shin; Nakamura, Mamoru

    1987-01-01

    There are very few literatures on successful visualization of adrenocortical carcinoma by means of /sup 131/I-iodocholesterol scintigraphy, although many reports have referred to utility of /sup 131/I-iodocholesterol scintigraphy for adrenal disorders. Since 1976, we have experienced 4 cases of adrenocortical carcinoma which were delineated by /sup 131/I-6US -iodomethyl-19-norcholesterol (/sup 131/I-Adosterol). Three of 4 cases were adrenocortical carcinoma with Cushing's syndrome, and one was adrenocortical carcinoma with adrenogenital syndrome. In 3 cases of cortisol secreting adrenocortical carcinoma, uptake in the tumor and lack of uptake in the contralateral adrenal gland were seen. Faint to moderate uptakes were observed in the 2 cases, but another one showed as high uptake as seen in adenoma. Patient with androgen secreting adrenocortical carcinoma had increased uptake in the tumor and showed faint uptake in the contralateral adrenal gland. Intensity of /sup 131/I-Adosterol uptake in adrenocortical carcinoma seems to depend on the extent of tumor necrosis, cell differentiation and function.

  3. /sup 131/I-meta-iodobenzylguanidine scintigraphy of neuroblastomas

    International Nuclear Information System (INIS)

    Munkner, T.

    1986-01-01

    Sixteen neuroblastoma patients have been studied by /sup 131/I-meta-iodobenzylguanidine scintigraphy. Three patients were possibly cured, and their scintigraphy results were normal. Thirteen patients had tumors and metastases demonstrated by /sup 131/I-MIBG, two of these patients had a normal vanillylmandelic acid excretion levels. One patient has been treated by /sup 131/I-MIBG, but died. /sup 131/I-MIBG was concentrated in other cells too, e.g., in erythrocytes and platelets. Neuroblastoma is the most common solid malignant disease in children. It has a poor prognosis in patients more than one year old. Early detection and a display of the spread of the tumor is of utmost importance for planning and controlling the treatment. Mass screening for neuroblastoma in infants has been suggested and tried in Japan. Scintigraphy after injection of /sup 131/I-meta-iodobenzylguanidine has been used successfully for locating neuroblastomas. An initial study failed to demonstrate neuroblastoma by means of MIBG in two patients. Since the latter part of 1983, MIBG has been used in a number of European centers for imaging neuroblastomas with very promising results, and a multicenter investigation has been initiated. The Ann Arbor group has recently extended its studies to a group of ten patients and has confirmed the European results

  4. In vivo biological evaluation of {sup 131}I radiolabeled-paclitaxel glucuronide ({sup 131}I-PAC-G)

    Energy Technology Data Exchange (ETDEWEB)

    Aslan, O.; Biber Muftuler, F.Z.; Yurt Kilcar, A.; Ichedef, C.; Unak, P. [Ege Univ., Izmir (Turkey). Dept. of Nuclear Applications

    2012-07-01

    Paclitaxel (PAC) is a natural occurring diterpene alkoloid originally isolated from the bark of Taxus Brevifolia. It is one of the most important antitumor agents for clinical treatment of ovarian, breast non-small cell lung and prostate cancers. It is known that these types of cancer cells have high {beta}-glucuronidase enzyme which can catalyze the hydrolysis of glucuronides. This is why the synthesis compounds which undergo glucuronidation come into question in the imaging and therapy of these cancer cells. The aim of current study is conjugation of glucuronic acid (G) to the starting substance PAC, labeling with {sup 131}I and to perform its in vivo biological evaluation. Glucuronic acid derived paclitaxel compound [paclitaxel-glucuronide (PAC-G)] was labeled with {sup 131}I using iodogen method. According to thin layer radio chromatography (TLRC) method, the radiochemical yield of {sup 131}I-PAC-G was 84.30 {+-} 7.40% (n=10). The biodistribution of {sup 131}I-PAC-G in healthy female and male Wistar Albino rats has been investigated. Imaging studies on male Balb-C mice were performed by using the Kodak FX PRO in vivo Imaging System. The range of the breast/blood, breast/muscle; ovary/blood, ovary/muscle ratios is approximately between 1.29 and 11.34 in 240 min, and between 0.71 and 8.24 in 240 min for female rats. The prostate/blood and prostate/muscle ratio is between 1.94 and 6.95 in 30 min for male rats. All these experimental studies indicate that {sup 131}I-PAC-G may potentially be used in breast, ovary and prostate tissues as an imaging agent. Also it is thought that {sup 131}I-PAC-G bears a therapy potential because of the {sup 131}I radionuclide and can be improved with further investigations. (orig.)

  5. Rf reactive sputtering of indium-tin-oxide films

    International Nuclear Information System (INIS)

    Tvarozek, V.; Novotny, I.; Harman, R.; Kovac, J.

    1986-01-01

    Films of indium-tin-oxide (ITO) have been deposited by rf reactive diode sputtering of metallic InSn alloy targets, or ceramic ITO targets, in an Ar and Ar+0 2 atmosphere. Electrical as well as optical properties of ITO films were controlled by varying sputtering parameters and by post-deposition heat-treatment in Ar, H 2 , N 2 , H 2 +N 2 ambients. The ITO films exhibited low resistivity approx. 2 x 10 -4 Ω cm, high transmittance approx. 90% in the visible spectral region and high reflectance approx. 80% in the near infra-red region. (author)

  6. Copper zinc tin sulfide-based thin film solar cells

    CERN Document Server

    Ito, Kentaro

    2014-01-01

    Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and tox

  7. Coating power RF components with TiN

    International Nuclear Information System (INIS)

    Kuchnir, M.; Hahn, E.

    1995-03-01

    A facility for coating RF power components with thin films of Ti and/or TiN has been in operation for some time at Fermilab supporting the Accelerator Division RF development work and the TESLA program. It has been experimentally verified that such coatings improve the performance of these components as far as withstanding higher electric fields. This is attributed to a reduction in the secondary electron emission coefficient of the surfaces when coated with a thin film containing titanium. The purpose of this Technical Memorandum is to describe the facility and the procedure used

  8. Charge radii and moments of tin nuclei by laser spectroscopy

    International Nuclear Information System (INIS)

    Anselment, M.; Bekk, K.; Hanser, A.; Hoeffgen, H.; Meisel, G.; Goering, S.; Rebel, H.; Schatz, G.

    1986-04-01

    The isotope shift and hyperfine structure of the optical Sn I resonance transition 5p 2 3 P 0 ->5p6s 3 P 1 at lambda=286.3 nm have been studied for 18 Sn nuclei including 2 isomers. Laser induced resonance fluorescence from a collimated atomic beam of tin was observed using a tunable cw dye laser with frequency doubler. The electromagnetic nuclear moments and changes of the mean square charge radii of the nuclear charge distributions were determined. The results are discussed with respect to the information they provide on the nuclear structure of the nuclei investigated; they are compared with various theoretical models. (orig.) [de

  9. Pretreatment of Platinum/Tin Oxide-Catalyst

    Science.gov (United States)

    Hess, Robert V.; Paulin, Patricia A.; Miller, Irvin M.; Schryer, David R.; Sidney, Barry D.; Wood, George M.; Upchurch, Billy T.; Brown, Kenneth G.

    1987-01-01

    Addition of CO to He pretreatment doubles catalytic activity. In sealed, high-energy, pulsed CO2 laser, CO and O2 form as decomposition products of CO2 in laser discharge zone. Products must be recombined, because oxygen concentration of more than few tenths of percent causes rapid deterioration of power, ending in unstable operation. Promising low-temperature catalyst for combining CO and O2 is platinum on tin oxide. New development increases activity of catalyst so less needed for recombination process.

  10. Reactivation of a tin oxide-containing catalyst

    Science.gov (United States)

    Upchurch, Billy T. (Inventor); Miller, Irvin M. (Inventor); Brown, Kenneth G. (Inventor); Hess, Robert V. (Inventor); Schryer, David R. (Inventor); Sidney, Barry D. (Inventor); Wood, George M. (Inventor); Paulin, Patricia A. (Inventor)

    1989-01-01

    A method for the reactivation of a tin oxide-containing catalyst of a CO.sub.2 laser is provided. First, the catalyst is pretreated by a standard procedure. When the catalyst experiences diminished activity during usage, the heated zone surrounding the catalyst is raised to a temperature which is the operating temperature of the laser and 400.degree. C. for approximately one hour. The catalyst is exposed to the same laser gas mixture during this period. The temperature of the heated zone is then lowered to the operating temperature of the CO.sub.2 laser.

  11. High dislocation density of tin induced by electric current

    International Nuclear Information System (INIS)

    Liao, Yi-Han; Liang, Chien-Lung; Lin, Kwang-Lung; Wu, Albert T.

    2015-01-01

    A dislocation density of as high as 10 17 /m 2 in a tin strip, as revealed by high resolution transmission electron microscope, was induced by current stressing at 6.5 x 10 3 A/ cm 2 . The dislocations exist in terms of dislocation line, dislocation loop, and dislocation aggregates. Electron Backscattered Diffraction images reflect that the high dislocation density induced the formation of low deflection angle subgrains, high deflection angle Widmanstätten grains, and recrystallization. The recrystallization gave rise to grain refining

  12. Calculated activity incorporated in the therapy with I131

    International Nuclear Information System (INIS)

    Chica, L.G.; Puerta, J.A.

    1998-01-01

    By means of the product S(T→ S).A s (T e ), the absorbed dose to thyroid delivered by I 131 incorporated is calculated. Where S(T→ S) is the absorbed dose in the thyroid per nuclear transformation (tn.) of I 131 localized in the thyroid and as a potential function of the mass is expressed. A s (T e ) is the number of tn. of I 131 in the thyroid since the moment of the incorporation until the time T e (the effective middle time); to find A s (T e ) to normal as different pathological conditions, the metabolic model of the iodo proposed by the ICRP is used. Of the expressions of the doses, the incorporated activity, l o , is obtained

  13. Production of 131 Iodine in research reactors from elementary tellurium

    International Nuclear Information System (INIS)

    Silva, Constancia Pagano Goncalves da

    1970-01-01

    Presents the history of the production of iodine-131 in the Institute of Atomic Energy (IEA), SP, Brazil), the preliminary works for the development of the method, which were done in small scale and it was not necessary protection for the operators, the evolution of these operations until the final assembling of the equipment in shielded cells, the efficiency of operations and product purity. The problems linked to the presence of iodate in the preparations and the changes made for elimination of that ion, harmful to many types and use of iodine-131 are examined. The quality of the product delivered today, an average of 140 departures per month, and the number of departures, per year since the beginning of iodine-131 production were indicated

  14. Clinical discussion of adrenal scan by 131I-adosterol

    International Nuclear Information System (INIS)

    Kubo, Atsushi

    1976-01-01

    131 I-adosterol adrenal scan was conducted to 31 patients. Clear positive images were obtained at the adrenal gland at the side of cortical adenoma on scintigram in all of 5 patients with primary aldosteronism and 5 patients with Cushing's syndrome. It was found that the quantitative measurements of 131 I-adosterol % uptake and of right-to-left uptake ratio do not only make a regional diagnosis of adrenocortical tumor more positive, but also they make the state of adrenocortical function known to an extent. Adrenal scan is easy to be used, and is non-invasive to patients. The obtained results are diagnostically valuable. It is considered that 131 I-Adosterol is an excellent radiopharmaceutical having the sufficient efficacy for adrenal diseases. (Ichikawa, K.)

  15. Synthesis labeling and biological studies of 16-131I

    International Nuclear Information System (INIS)

    Sato, M.K.

    1988-01-01

    The increasing interest in obtaining radiopharmaceuticals for metabolic imaging of heart muscle led us to prepare 16-IODINE HEXADECANOIC ACID by tosilation of the corresponding hydroxy acid, following iodination with NaI and finally, introducing radioiodine (Na 131 I) by isotopic exchange reaction. The reaction products were identified by determination of melting point, elementary and spectroscopic analysis such as infra-red absortion and magnetic nuclear resonance. The radiopharmaceutical after radiochemical and other specific control procedures for injetable such as sterility and apyrogenicity, was firstly utilized in dogs: preferencial uptake by the heart, as well as by the liver was confirmed. Then, studies in patients with or without heart diseases were performed. The biodistribution of 16- 131 I-HEXADECANOIC ACID was carried out in Wistar rats. The scintigraphic images in animals and in humans demonstrated that 16- 131 -HEXADECANOIC ACID is suitable for studying viable areas as well as energetic exchange of heart muscle. (author) [pt

  16. Immunotoxic effects of iodine-131 in prenatally exposed rats

    International Nuclear Information System (INIS)

    Cole, D.A.; Stevens, R.H.; Lindholm, P.A.; Cheng, H.F.

    1985-01-01

    Present results suggest that offspring exposed in utero to radioactive iodine-131 develop a measureable cell-mediated immune (CMI) response. Regnant Fischer F344 inbred rats were exposed to 370 kBg to 3.7 MBg (10 to 100 μCi) Na 131I on 16 to 18 days of gestation and evaluated for CMI responsiveness 2 to 3 months post exposure using an 125I radiolabeled membrane release assay. Current data suggest that not only the F1, but also the F2 pups develop a measureable CMI response. In order to determine whether other immune functions are altered studies have been initiated to evaluate the immunotoxic effect of prenatal exposure to 131I. These studies include the evaluation of the delayed hypersensitivity response and the blastogenic responses to phytoheemagglutinin, concanavalin A, and lipopolysaccharide

  17. Synthesis and shape control of copper tin sulphide nanocrystals and formation of gold-copper tin sulphide hybrid nanostructures

    International Nuclear Information System (INIS)

    Kruszynska, Marta; Parisi, Juergen; Kolny-Olesiak, Joanna

    2014-01-01

    Hexagonal prismatic Cu 3 SnS 4 nanoparticles and nanorods were synthesized by a hot-injection procedure. Changing the reaction conditions leads to the formation of different shapes. When oleylamine is used as a solvent, hexagonal prismatic particles are obtained, while a reaction in octadecene results in the formation of nanorods. The growth process of copper tin sulphide starts with the formation of djurleite copper sulphide seeds. Their reaction with Sn 4+ ions leads to the formation of Cu 3 SnS 4 . These Cu 3 SnS 4 nanocrystals form Au-Cu 3 SnS 4 hybrid nanostructures by reaction with gold seeds.

  18. Experience by the use of /sup 131/I-19-iodocholesterol

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, H; Tsuru, Y; Inazuki, S; Fujimoto, S; Futagawa, S [Nagasaki Univ. (Japan). School of Medicine

    1975-01-01

    Clinical application of /sup 131/I-iodocholesterol to adrenal scintigraphy of the total 50 times was made in 36 patients suggestive of adrenal disease. The index and ratio of bilateral adrenal alands were calculated by ROI processing on the computer scintigram, which was assumed useful for diagnosis of adrenocortical hypofunction as well as its hyperfunction as formerly said. Adrenal scintigraphy with /sup 131/I-iodocholesterol is routine examination which should be positively applied to patients with adrenal cortex disease, because its exposure dose is as small as it matters little except for repeating frequently.

  19. Production technology of 131I-rose bengal

    International Nuclear Information System (INIS)

    Hradilek, P.; Miklik, M.; Kopicka, K.; Kronrad, L.

    1983-01-01

    A detailed description is presented of the production equipment and production process used for Rose Bengal labelled with 131 I designed for use in nuclear medicine. The apparatus was installed in the semi-hot cell laboratory of the Nuclear Research Institute at Rez. The processed activity is around 20 GBq, the average yield of the ion exchange reaction between non-radioactive Rose Bengal and 131 I-labelled sodium iodide is 90%. The unreacted active sodium iodide is separated and the resulting product is diluted and processed into a drug presentation, sterilized and after random control is distributed in 14 days intervals to medical workplaces. (M.D.)

  20. Synthesis and labelling of 19-iodocholesterol 131I

    International Nuclear Information System (INIS)

    Hamada, E.S.

    1979-01-01

    Considering the increasing interest in obtaining agents for vizualization of the adrenal gland with radioisotopic techniques, 19-iodocholesterol was prepared by means of chemical synthesis and radioiodine ( 131 I) introduced by isotopic exchange reaction. The reaction product was identified by determination of the melting point and elementary spectroscopic analysis (infra-red absorption and magnetic nuclear ressonance). Radiochemical analysis of the labelled compound was performed by means of then-layer cromatography in silica-gel. In order to confirm its capacity of concentration in the adrenal gland, the distribution of 19-iodocholesterol 131 I, after intravenous injection, was tested in rats. (Author) [pt

  1. The importance of localisation within 131J-retention measurements

    International Nuclear Information System (INIS)

    Greifeneder, G.; Aiginger, H.; Steger, F.; Flores, J.

    1996-01-01

    A widely used method to investigate thyroid gland carcinomas, but also disorders of the thyroid gland is the measurement of the 131 J-retention behaviour using a high-sensitivity whole-body counter (HWBC). Normally just the retention of oral administered Radioiodine is controlled. However, it is possible to visualize the distribution of 131 J (using a modified profilescantechnique) beside the retention in the human body and this provides much better information on human metabolism as will be demonstrated in the following

  2. Rapid Identification of Different Escherichia coli Sequence Type 131 Clades.

    Science.gov (United States)

    Matsumura, Yasufumi; Pitout, Johann D D; Peirano, Gisele; DeVinney, Rebekah; Noguchi, Taro; Yamamoto, Masaki; Gomi, Ryota; Matsuda, Tomonari; Nakano, Satoshi; Nagao, Miki; Tanaka, Michio; Ichiyama, Satoshi

    2017-08-01

    Escherichia coli sequence type 131 (ST131) is a pandemic clonal lineage that is responsible for the global increase in fluoroquinolone resistance and extended-spectrum-β-lactamase (ESBL) producers. The members of ST131 clade C, especially subclades C2 and C1-M27, are associated with ESBLs. We developed a multiplex conventional PCR assay with the ability to detect all ST131 clades (A, B, and C), as well as C subclades (C1-M27, C1-nM27 [C1-non-M27], and C2). To validate the assay, we used 80 ST131 global isolates that had been fully sequenced. We then used the assay to define the prevalence of each clade in two Japanese collections consisting of 460 ESBL-producing E. coli ST131 (2001-12) and 329 E. coli isolates from extraintestinal sites (ExPEC) (2014). The assay correctly identified the different clades in all 80 global isolates: clades A ( n = 12), B ( n = 12), and C, including subclades C1-M27 ( n = 16), C1-nM27 ( n = 20), C2 ( n = 17), and other C ( n = 3). The assay also detected all 565 ST131 isolates in both collections without any false positives. Isolates from clades A ( n = 54), B ( n = 23), and C ( n = 483) corresponded to the O serotypes and the fimH types of O16-H41, O25b-H22, and O25b-H30, respectively. Of the 483 clade C isolates, C1-M27 was the most common subclade (36%), followed by C1-nM27 (32%) and C2 (15%). The C1-M27 subclade with bla CTX-M-27 became especially prominent after 2009. Our novel multiplex PCR assay revealed the predominance of the C1-M27 subclade in recent Japanese ESBL-producing E. coli isolates and is a promising tool for epidemiological studies of ST131. Copyright © 2017 American Society for Microbiology.

  3. 131I-19-iodocholesterol adrenal scanning in Cushing's syndrome

    International Nuclear Information System (INIS)

    Charbonnel, B.; Chatal, J.F.; Chupin, M.; Guillon, J.

    1976-01-01

    7 patients were investigated: 2 bilateral hyperplasia due to pituitary ACTH excess showed bilateral adrenal activity. 1 post-surgical remnant with recurrent Cushing's syndrome was detected. 1 adenoma showed unilateral intense activity and absent activity in the controlateral gland, even after ACTH treatment. 2 carcinomas were weakly imaged. In 1 case, hepatic metastasis showed 131 I-19-iodocholesterol uptake. Adrenal imaging with 131 I-19-iodocholesterol is not a good procedure for assessing hormonal function. It is a valuable and safe tool in the localization and diagnosis of adrenal lesions causing Cushing's syndrome, perhaps better than radiologic procedures. Radiation dosimetry is acceptable [fr

  4. Radiation exposure estimation from patient treated by I-131

    International Nuclear Information System (INIS)

    Lahfi, Y.; Anjak, O.

    2012-09-01

    Radioactive iodine is the main radiopharmaceutical substance in the nuclear medicine field which used in diagnosis and treatment of patients suffering from thyroid cancer; thus it can be considered as the main source of the public and patient relative exposure. In this study, 192 patients were selected randomly and their radiation dose rate was measured at different levels of the patient's body (thyroid, knee, bladder) after one, twenty four and forty eight hours from availing the prescript quantity of the I-131. The collected data may serve in estimating the worker and public exposure related to the patient treated by I-131. (authors)

  5. Genetic effects of iodine 131 incorporation in mammals

    International Nuclear Information System (INIS)

    Bajrakova, A.

    1988-01-01

    The translocation yield after single treatment of male mice with iodine 131 (55,5 - 222,0 kBq/g b.w.) was investigated. The results of the cytogenetic analysis of the gonad cells revealed the effectiveness only of the highest activity, distroying the thyroid gland. The so-called direct method was also used for determination of the risk coefficients for the expected new carriers of balanced and unbalanced translocations in the first generation - the genetic effects which could be expected from the use of iodine-131-diagnostics in a hypothetic population

  6. Low-lying levels of 129Xe and 131Xe

    International Nuclear Information System (INIS)

    Palmer, D.C.; Irving, A.D.; Forsyth, P.D.; Hall, I.; Martin, D.G.E.; Maynard, M.J.

    1978-01-01

    The nuclei 129 Xe and 131 Xe have been studied by Coulomb excitation and by (α, n) reactions on 126 Te and 128 Te. Eleven new levels for 129 Xe and six for 131 Xe and B(E2) transition values for some of the low-lying states are reported. The present Coulomb excitation experiments together with published β-decay work enable some spin-parity assignments and restrictions to be made. The data are broadly consistent with the predictions of the particle-vibrator coupling model, although a thorough comparison requires further spectroscopic measurements and more detailed theoretical calculation. (author)

  7. Tin dioxide sol-gel derived films doped with platinum and antimony deposited on porous silicon

    NARCIS (Netherlands)

    Savaniu, C.; Arnautu, A.; Cobianu, C.; Craciun, G.; Flueraru, C.; Zaharescu, M.; Parlog, C.; Paszti, F.; van den Berg, Albert

    1999-01-01

    SnO2 sol-gel derived thin films doped simultaneously with Pt and Sb are obtained and reported for the first time. The Sn sources were tin(IV) ethoxide or tin(II) ethylhexanoate, while hexachloroplatinic acid (H2PtCl6) and antimony chloride (SbCl3) were used as platinum and antimony sources,

  8. Occupational irritant contact folliculitis associated with triphenyl tin fluoride (TPTF) exposure

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Petri, M

    1982-01-01

    Triphenyl tin fluoride (TPTF) is a bioactive organo-tin compound used in concentrations 2-12% as anti-foulants in boat paints. The chemical is moderately toxic to the skin. An occupational irritant contact folliculitis from TPTF in a marine paint plant worker is described. Contact allergy...

  9. 77 FR 32998 - Tin- and Chromium-Coated Steel Sheet From Japan

    Science.gov (United States)

    2012-06-04

    ...-Coated Steel Sheet From Japan Determination On the basis of the record \\1\\ developed in the subject five... order on tin- and chromium-coated steel sheet from Japan would be likely to lead to continuation or... USITC Publication 4325 (May 2012), entitled Tin- and Chromium-Coated Steel Sheet from Japan...

  10. Self-consistent approximation for muffin-tin models of random substitutional alloys with environmental disorder

    International Nuclear Information System (INIS)

    Kaplan, T.; Gray, L.J.

    1984-01-01

    The self-consistent approximation of Kaplan, Leath, Gray, and Diehl is applied to models for substitutional random alloys with muffin-tin potentials. The particular advantage of this approximation is that, in addition to including cluster scattering, the muffin-tin potentials in the alloy can depend on the occupation of the surrounding sites (i.e., environmental disorder is included)

  11. Selective Recovery of Mushistonite from Gravity Tailings of Copper–Tin Minerals in Tajikistan

    Directory of Open Access Journals (Sweden)

    Lei Sun

    2017-12-01

    Full Text Available Tajikistan has abundant copper–tin resources. In this study, mineralogical analysis of copper–tin ores from the Mushiston deposit of Tajikistan indicates that tin mainly occurred in mushistonite, cassiterite, and stannite, while copper mainly occurred in mushistonite, malachite, azurite, and stannite. The total grades of tin (Sn and copper (Cu were 0.65% and 0.66%, respectively, and the dissemination size of copper–tin minerals ranged from 4 μm to over 200 μm. Coarse particles of copper–tin minerals were partially recovered by shaking table concentrators with a low recovery rate. Based on the mineralogical analysis, flotation recovery was used for the first time on the fine particles of copper–tin minerals, including mushistonite, from shaking table tailings. Single factor flotation experiments, open circuit flotation tests, and closed circuit flotation tests were performed to determine the optimized flotation conditions. Results indicated that benzohydroxamic acid (C6H5CONHOH and lead nitrate could effectively recover the mushistonite, cooperating with other depressants. The final concentrate contained 13.28% Sn, with a recovery rate of 61.56%, and 18.51% Cu, with a recovery rate of 86.52%. This method proved effective for the exploitation and use of this type of copper–tin resource in Tajikistan.

  12. Moessbauer study of the lattice dynamics of tin atoms in antimony

    International Nuclear Information System (INIS)

    Sitek, J.

    1975-01-01

    The Moessbauer effect probability f was investigated for tin impurity atoms in the SnSb solution (the impurity varied from 3 at% to 15 at%). The absolute value of the Moessbauer effect probability was determined from Moessbauer absorption spectra by the area method using a calibration absorber of a β-tin foil with known f. (Z.S.)

  13. Fast, versatile x-ray fluorescence method for measuring tin in impregnated wood

    DEFF Research Database (Denmark)

    Drabæk, I.; Christensen, Leif Højslet

    1985-01-01

    The present paper describes an energy-dispersive x-ray fluorescence method for measuring tin in bis(tri-n-butyl)tin-oxide impregnated wood. The proposed method is of the backscatter/fundamental parameter type. Its versatility, precision, and accuracy is demonstrated by analyses of eleven samples...

  14. The electrochemical deposition of tin-nickel alloys and the corrosion properties of the coating

    DEFF Research Database (Denmark)

    Jellesen, Morten Stendahl; Møller, Per

    2005-01-01

    The electrodeposition of tin/nickel (65/35 wt%) is a unique coating process because of the deposition of an intermetallic phase of nickel and tin, which cannot be formed by any pyrometallurgical process. From thermodynamic calculations it can be shown that intermetallic phases can be formed throu...

  15. Reversible storage of lithium in a rambutan-like tin-carbon electrode.

    Science.gov (United States)

    Deng, Da; Lee, Jim Yang

    2009-01-01

    Fruity electrodes: A simple bottom-up self-assembly method was used to fabricate rambutan-like tin-carbon (Sn@C) nanoarchitecture (see scheme, green Sn) to improve the reversible storage of lithium in tin. The mechanism of the growth of the pear-like hairs is explored.

  16. Tin- and Lead-Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective

    DEFF Research Database (Denmark)

    Serrano-Luján, Lucía; Espinosa Martinez, Nieves; Larsen-Olsen, Thue Trofod

    2015-01-01

    The effect of substituting lead with tin in perovskite-based solar cells (PSCs) has shows that lead is preferred over tin by a lower cumulative energy demand. The results, which also include end-of-life management, show that a recycling scenario that carefully handles emission of lead enables use...

  17. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Tin-coated lead foil capsules for wine bottles. 189... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES PROHIBITED FROM USE IN HUMAN FOOD... lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one...

  18. Colorimetric properties of TiN coating implanted by aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Q.G. [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)]. E-mail: zhouqg99@mails.tsinghua.edu.cn; Bai, X.D. [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Xue, X.Y. [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Ling, Y.H. [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Chen, X.W. [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Xu, J. [Beijing Great Wall Ti-Gold Corporation, Beijing 100095 (China); Wang, D.R. [Beijing Great Wall Ti-Gold Corporation, Beijing 100095 (China)

    2005-04-05

    TiN coating was prepared by cathodic arc deposition and implanted aluminum using a metal vacuum vapor arc ion source with doses ranging from 5 x 10{sup 16} to 2 x 10{sup 17} ions/cm{sup 2}. The purpose of this work was to determine the dependence of the colorimetric properties of TiN films on the implanting conditions, especially by the aluminum ion implantation. The colorimetry of coatings was evaluated quantitatively in terms of CIE L * a * b *. The color coordinate values L *, a *, and b * provide a numerical representation of the color of the surface. With the dose increasing, the surface color has no obvious change but the surface turns brighter, and a * as well as b * values all decline. The X-ray diffraction patterns showed that the aluminum implantation induced a slight shift of diffraction peaks. X-ray photoemission spectroscopy was employed to analyze the surface valence states. The oxygen in surface top layer does not decrease a * and b * values, it partially combined with nitrogen.

  19. Accommodation of tin in tetragonal ZrO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Bell, B. D. C.; Grimes, R. W.; Wenman, M. R., E-mail: m.wenman@imperial.ac.uk [Department of Materials and Centre for Nuclear Engineering, Imperial College, London SW7 2AZ (United Kingdom); Murphy, S. T. [Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom); Burr, P. A. [Department of Materials and Centre for Nuclear Engineering, Imperial College, London SW7 2AZ (United Kingdom); Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, Menai, New South Wales 2234 (Australia)

    2015-02-28

    Atomic scale computer simulations using density functional theory were used to investigate the behaviour of tin in the tetragonal phase oxide layer on Zr-based alloys. The Sn{sub Zr}{sup ×} defect was shown to be dominant across most oxygen partial pressures, with Sn{sub Zr}{sup ″} charge compensated by V{sub O}{sup ••} occurring at partial pressures below 10{sup −31 }atm. Insertion of additional positive charge into the system was shown to significantly increase the critical partial pressure at which Sn{sub Zr}{sup ″} is stable. Recently developed low-Sn nuclear fuel cladding alloys have demonstrated an improved corrosion resistance and a delayed transition compared to Sn-containing alloys, such as Zircaloy-4. The interaction between the positive charge and the tin defect is discussed in the context of alloying additions, such as niobium and their influence on corrosion of cladding alloys.

  20. Indium tin oxide films prepared via wet chemical route

    International Nuclear Information System (INIS)

    Legnani, C.; Lima, S.A.M.; Oliveira, H.H.S.; Quirino, W.G.; Machado, R.; Santos, R.M.B.; Davolos, M.R.; Achete, C.A.; Cremona, M.

    2007-01-01

    In this work, indium tin oxide (ITO) films were prepared using a wet chemical route, the Pechini method. This consists of a polyesterification reaction between an α-hydroxicarboxylate complex (indium citrate and tin citrate) with a polyalcohol (ethylene glycol) followed by a post annealing at 500 deg. C. A 10 at.% of doping of Sn 4+ ions into an In 2 O 3 matrix was successfully achieved through this method. In order to characterize the structure, the morphology as well as the optical and electrical properties of the produced ITO films, they were analyzed using different experimental techniques. The obtained films are highly transparent, exhibiting transmittance of about 85% at 550 nm. They are crystalline with a preferred orientation of [222]. Microscopy discloses that the films are composed of grains of 30 nm average size and 0.63 nm RMS roughness. The films' measured resistivity, mobility and charge carrier concentration were 5.8 x 10 -3 Ω cm, 2.9 cm 2 /V s and - 3.5 x 10 20 /cm 3 , respectively. While the low mobility value can be related to the small grain size, the charge carrier concentration value can be explained in terms of the high oxygen concentration level resulting from the thermal treatment process performed in air. The experimental conditions are being refined to improve the electrical characteristics of the films while good optical, chemical, structural and morphological qualities already achieved are maintained

  1. The\tutility\tof\tneuroimaging\tin\tthe\tmanagement\tof\tdementia

    Directory of Open Access Journals (Sweden)

    Uduak\tE\tWilliams

    2015-10-01

    Full Text Available Dementia is a syndrome of progressive dysfunction of two or more cognitive\tdomains\tassociated\twith\timpairment\tof\tactivities\tof\tdaily\tliving. An understanding of the pathophysiology of dementia and its early diagnosis\tis\timportant\tin\tthe\tpursuit\tof\tpossible\tdisease\tmodifying\ttherapy for\tdementia.\tNeuroimaging\thas\tgreatly\ttransformed\tthis\tfield\tof\tresearch as its function has changed from a mere tool for diagnosing treatable causes of dementia to an instrument for pre-symptomatic diagnosis of dementia. This\treview\tfocuses\ton\tthe\tdiagnostic\tutility\tof\tneuroimaging\tin the\tmanagement\tof\tprogressive\tdementias.\tStructural\timaging\ttechniques like computerized tomography scan and magnetic resonance imaging highlights the anatomical, structural and volumetric details of the brain; while functional imaging techniques such as positron emission tomography, arterial spin labeling, single photon emission computerized tomography\tand\tblood\toxygen\tlevel-dependent\tfunctional\tmagnetic\tresonance\timaging\tfocuses\ton\tchemistry, circulatory\tstatus\tand\tphysiology\tof\tthe\tdifferent\tbrain\tstructures\tand\tregions.

  2. A variable resolution right TIN approach for gridded oceanographic data

    Science.gov (United States)

    Marks, David; Elmore, Paul; Blain, Cheryl Ann; Bourgeois, Brian; Petry, Frederick; Ferrini, Vicki

    2017-12-01

    Many oceanographic applications require multi resolution representation of gridded data such as for bathymetric data. Although triangular irregular networks (TINs) allow for variable resolution, they do not provide a gridded structure. Right TINs (RTINs) are compatible with a gridded structure. We explored the use of two approaches for RTINs termed top-down and bottom-up implementations. We illustrate why the latter is most appropriate for gridded data and describe for this technique how the data can be thinned. While both the top-down and bottom-up approaches accurately preserve the surface morphology of any given region, the top-down method of vertex placement can fail to match the actual vertex locations of the underlying grid in many instances, resulting in obscured topology/bathymetry. Finally we describe the use of the bottom-up approach and data thinning in two applications. The first is to provide thinned, variable resolution bathymetry data for tests of storm surge and inundation modeling, in particular hurricane Katrina. Secondly we consider the use of the approach for an application to an oceanographic data grid of 3-D ocean temperature.

  3. Amdel on-line analyser at Rooiberg Tin Limited

    International Nuclear Information System (INIS)

    Owen, T.V.

    1987-01-01

    An Amdel on line analysis system was installed on the 'A' mine tin flotation plant at Rooiberg in April 1984. The motivation for the installation was made on account of the large variations in the feed grade to the plant and the resulting need for rapid operational adjustments to control concentrate grades thereby maximising the financial returns. An 'on-line' analyser system presented itself as a suitable alternative to the existing control method of smaller laboratory x-ray fluorescence analysers. On the system as installed at Rooiberg, two probes were fitted in each analysis zone, viz a density probe using high energy gamma radiation from a Cesium 127 source and a specific element absorption probe using low energy gamma radiation from a Americium 241 source. The signals as received from the probes are fed to a line receiver unit in the control room where a micro computer is doing the processing and prints out the information as required. Several advantages of this type of installation were gained at Rooiberg Tin Limited

  4. Electrochemical migration of tin in electronics and microstructure of the dendrites

    DEFF Research Database (Denmark)

    Minzari, Daniel; Grumsen, Flemming Bjerg; Jellesen, Morten Stendahl

    2011-01-01

    The macro-, micro-, and nano-scale morphology and structure of tin dendrites, formed by electrochemical migration on a surface mount ceramic chip resistor having electrodes consisting of tin with small amounts of Pb (∼2wt.%) was investigated by scanning electron microscopy and transmission electr...... by the dehydration of the hydrated oxide originally formed in solution ex-situ in ambient air.......The macro-, micro-, and nano-scale morphology and structure of tin dendrites, formed by electrochemical migration on a surface mount ceramic chip resistor having electrodes consisting of tin with small amounts of Pb (∼2wt.%) was investigated by scanning electron microscopy and transmission electron...... microscopy including Energy dispersive X-ray spectroscopy and electron diffraction. The tin dendrites were formed under 5 or 12V potential bias in 10ppm by weight NaCl electrolyte as a micro-droplet on the resistor during electrochemical migration experiments. The dendrites formed were found to have...

  5. Synthesis of antimony-doped tin oxide (ATO) nanoparticles by the nitrate-citrate combustion method

    International Nuclear Information System (INIS)

    Zhang Jianrong; Gao Lian

    2004-01-01

    Antimony-doped tin oxide (ATO) nanoparticles having rutile structure have been synthesized by the combustion method using citric acid (CA) as fuel and nitrate as an oxidant, the metal sources were granulated tin and Sb 2 O 3 . The influence of citric acid (fuel) to metal ratio on the average crystallite size, specific surface area and morphology of the nanoparticles has been investigated. X-ray diffraction showed the tin ions were reduced to elemental tin during combustion reaction. The average ATO crystallite size increased with the increase of citric acid (fuel). Powder morphology and the comparison of crystallite size and grain size shows that the degree of agglomeration of the powder decreased with an increase of the ratio. The highest specific surface area was 37.5 m 2 /g when the citric acid to tin ratio was about 6

  6. VO2 /TiN Plasmonic Thermochromic Smart Coatings for Room-Temperature Applications.

    Science.gov (United States)

    Hao, Qi; Li, Wan; Xu, Huiyan; Wang, Jiawei; Yin, Yin; Wang, Huaiyu; Ma, Libo; Ma, Fei; Jiang, Xuchuan; Schmidt, Oliver G; Chu, Paul K

    2018-03-01

    Vanadium dioxide/titanium nitride (VO 2 /TiN) smart coatings are prepared by hybridizing thermochromic VO 2 with plasmonic TiN nanoparticles. The VO 2 /TiN coatings can control infrared (IR) radiation dynamically in accordance with the ambient temperature and illumination intensity. It blocks IR light under strong illumination at 28 °C but is IR transparent under weak irradiation conditions or at a low temperature of 20 °C. The VO 2 /TiN coatings exhibit a good integral visible transmittance of up to 51% and excellent IR switching efficiency of 48% at 2000 nm. These unique advantages make VO 2 /TiN promising as smart energy-saving windows. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Numerical Simulation of Wave Propagation and Phase Transition of Tin under Shock-Wave Loading

    International Nuclear Information System (INIS)

    Hai-Feng, Song; Hai-Feng, Liu; Guang-Cai, Zhang; Yan-Hong, Zhao

    2009-01-01

    We undertake a numerical simulation of shock experiments on tin reported in the literature, by using a multiphase equation of state (MEOS) and a multiphase Steinberg Guinan (MSG) constitutive model for tin in the β, γ and liquid phases. In the MSG model, the Bauschinger effect is considered to better describe the unloading behavior. The phase diagram and Hugoniot of tin are calculated by MEOS, and they agree well with the experimental data. Combined with the MEOS and MSG models, hydrodynamic computer simulations are successful in reproducing the measured velocity profile of the shock wave experiment. Moreover, by analyzing the mass fraction contour as well as stress and temperature profiles of each phase for tin, we further discuss the complex behavior of tin under shock-wave loading. (condensed matter: structure, mechanical and thermal properties)

  8. Assessment of organotin and tin-free antifouling paints contamination in the Korean coastal area.

    Science.gov (United States)

    Lee, Mi-Ri-Nae; Kim, Un-Jung; Lee, In-Seok; Choi, Minkyu; Oh, Jeong-Eun

    2015-10-15

    Twelve organotins (methyl-, octyl-, butyl-, and phenyl-tin), and eight tin-free antifouling paints and their degradation products were measured in marine sediments from the Korean coastal area, and Busan and Ulsan bays, the largest harbor area in Korea. The total concentration of tin-free antifouling paints was two- to threefold higher than the total concentration of organotins. Principal component analysis was used to identify sites with relatively high levels of contamination in the inner bay area of Busan and Ulsan bays, which were separated from the coastal area. In Busan and Ulsan bays, chlorothalonil and DMSA were more dominant than in the coastal area. However, Sea-Nine 211 and total diurons, including their degradation products, were generally dominant in the Korean coastal area. The concentrations of tin and tin-free compounds were significantly different between the east and west coasts. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Research into tin and arsenical copper artefacts using nuclear analytical techniques

    International Nuclear Information System (INIS)

    Grant, M.R.

    1995-01-01

    This study includes the chemical analysis, sourcing and historical metallurgy of tin and arsenical copper artefacts discovered at Rooiberg and elsewhere in the Northern Transvaal and at Great Zimbabwe. A complete chemical analysis method for tin and cassiterite is presented, based on INAA (instrumental neutron activation analysis) and supplemented by PIXE or AAS for elements such as lead, bismuth and niobium. This is apparently the first study in which tin artefacts were analysed by INAA without chemical processing of the samples. INAA and PIXE returned the same results when a homogenized tin alloy block was analysed, but the structure and distribution of hardhead phases appear to produce an iron quantification problem in ancient tin. Ores and slags were analysed for light matrix elements by XRF or PIXE and INAA for the heavy trace metals. 108 refs., 24 figs., 130 tabs

  10. NASA GSFC Tin Whisker Homepage http://nepp.nasa.gov/whisker

    Science.gov (United States)

    Shaw, Harry

    2000-01-01

    The NASA GSFC Tin Whisker Homepage provides general information and GSFC Code 562 experimentation results regarding the well known phenomenon of tin whisker formation from pure tin plated substrates. The objective of this www site is to provide a central repository for information pertaining to this phenomenon and to provide status of the GSFC experiments to understand the behavior of tin whiskers in space environments. The Tin Whisker www site is produced by Code 562. This www site does not provide information pertaining to patented or proprietary information. All of the information contained in this www site is at the level of that produced by industry and university researchers and is published at international conferences.

  11. Effects on stress rupture life and tensile strength of tin additions to Inconel 718

    Science.gov (United States)

    Dreshfield, R. L.; Johnson, W.

    1982-01-01

    Because Inconel 718 represents a major use of columbium and a large potential source of columbium for aerospace alloys could be that of columbium derived from tin slags, the effects of tin additions to Inconel 718 at levels which might be typical of or exceed those anticipated if tin slag derived columbium were used as a melting stock were investigated. Tin was added to 15 pound Inconel 718 heats at levels varying from none added to approximately 10,000 ppm (1 wt%). Limited 1200 F stress rupture testing was performed at stresses from 68,000 to 115,000 psi and a few tensile tests were performed at room temperature, 800 and 1200 F. Additions of tin in excess of 800 ppm were detrimental to ductility and stress rupture life.

  12. Stability studies of therapeutic 131I-meta-iodobenzylguanidine (131I-mIBG) using high performance liquid chromatography

    International Nuclear Information System (INIS)

    Murhekar, V.V.; Mathur, Anupam; Pilkhwal, Neelam S.; Prabhakar, G.; Padmanabhan, D.; Sachdev, S.S.

    2014-01-01

    BRIT is a manufacturer and supplier of therapeutic doses (100 mCi) of the radiopharmaceutical 131 I-mIBG to various nuclear medicine centers in India. The therapeutic formulation is of high radioactive concentration (>10 mCi/ml) and is thus prone to radiolytic damage during transport, storage until administration. Earlier stability studies at this laboratory were done using conventional methods like Thin Layer Chromatography (TLC) which has an inherent limitation in terms of resolution. In view of this, a suitable HPLC method has been developed and the stability of therapeutic 131 I-mIBG was monitored at various conditions

  13. 76 FR 58536 - Tin- and Chromium-Coated Steel Sheet From Japan; Notice of Commission Determination To Conduct a...

    Science.gov (United States)

    2011-09-21

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-860 (Second Review)] Tin- and Chromium... Concerning the Antidumping Duty Order on Tin- and Chromium-Coated Steel Sheet From Japan AGENCY: United.... 1675(c)(5)) to determine whether revocation of the antidumping duty order on tin- and chromium-coated...

  14. Stress analysis and microstructure of PVD monolayer TiN and multilayer TiN/(Ti,Al)N coatings

    NARCIS (Netherlands)

    Carvalho, NJM; Zoestbergen, E; Kooi, BJ; De Hosson, JTM

    2003-01-01

    Two PVD titanium nitride based coatings; monolayer TiN and multilayer resulting from the stacking of TiN and (Ti,Al)N layers were evaluated with respect to their stress state and microstructure. The TiN was deposited by triode evaporation ion plating, whereas the TiN/(Ti,AI)N was deposited using a

  15. 76 FR 60001 - Certain Tin Mill Products From Japan; Final Results of the Second Expedited Sunset Review of the...

    Science.gov (United States)

    2011-09-28

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-588-854] Certain Tin Mill Products... duty order on certain tin mill products from Japan, pursuant to section 751(c) of the Tariff [[Page... on certain tin mill products from Japan pursuant to section 751(c) of the Act. See Initiation of Five...

  16. A High Current Density Low Cost Niobium 3 Tin Titanium Doped Conductor Utilizing A Novel Internal Tin Process

    International Nuclear Information System (INIS)

    Bruce A Zeitlin

    2005-01-01

    An internal tin conductor has been developed using a Mono Element Internal Tin (MEIT) with an integral Nb barrier surrounding the Nb filaments. High current densities of 3000 A/mm2+ at 12 T and 1800 A/mm2 at 15 T have been achieved in conductors as small as 0.152 mm with the use of Nb7.5Ta filaments and Ti in the Sn core. In contrast, conductors with pure Nb and Ti in the Sn achieved 2700 A/mm2 at 12 T. Two internal fins, developed and patented on the project, were introduced into the filament array and reduced the effective filament diameter (Deff) by 38%. Additional fins will further reduce Deff The conductor was produced from 152.4 mm diameter billets to produce wire as small as 0.152 mm. The process promises be scaleable to 304 mm diameter billets yielding wire of 0.304 mm diameter. The MEIT process wire was easy to draw with relatively few breaks. The cost of this conductor in large production quantities based on the cost model presented could meet the 1.5 $/kilo amp meter(KAM) target of the HEP community

  17. Sources and historical record of tin and butyl-tin species in a Mediterranean bay (Toulon Bay, France).

    Science.gov (United States)

    Pougnet, Frédérique; Schäfer, Jörg; Dutruch, Lionel; Garnier, Cédric; Tessier, Erwan; Dang, Duc Huy; Lanceleur, Laurent; Mullot, Jean-Ulrich; Lenoble, Véronique; Blanc, Gérard

    2014-05-01

    Concentrations of inorganic tin (Sn(inorg)), tributyltin (TBT) and its degradation products dibutyltin (DBT) and monobutyltin (MBT) were measured in surface sediments and in two cores from the Toulon Bay, hosting the major French military harbour. Anticipating planned dredging, the aim of the present work is to map and evaluate for the first time the recent and historic contamination of these sediments by inorganic and organic Sn species derived from antifouling paints used for various naval domains including military, trade, tourism and leisure. Tin and butyl-Sn concentrations in the bay varied strongly (4 orders of magnitude), depending on the site, showing maximum values near the shipyards. The concentrations of total Sn (1.3-112 μg g(-1)), TBT (product Sn(inorgBT) is by far the dominant species after 10-12 half-life periods and (c) using recent data to reliably assess former TBT contamination requires the use of a modified butyl-Sn degradation index BDI(mod). Resuspension of extremely contaminated subsurface sediments by the scheduled dredging will probably result in mobilization of important amounts of butyl-Sn species.

  18. Preparation of transparent conductive indium tin oxide thin films from nanocrystalline indium tin hydroxide by dip-coating method

    International Nuclear Information System (INIS)

    Koroesi, Laszlo; Papp, Szilvia; Dekany, Imre

    2011-01-01

    Indium tin oxide (ITO) thin films with well-controlled layer thickness were produced by dip-coating method. The ITO was synthesized by a sol-gel technique involving the use of aqueous InCl 3 , SnCl 4 and NH 3 solutions. To obtain stable sols for thin film preparation, as-prepared Sn-doped indium hydroxide was dialyzed, aged, and dispersed in ethanol. Polyvinylpyrrolidone (PVP) was applied to enhance the stability of the resulting ethanolic sols. The transparent, conductive ITO films on glass substrates were characterized by X-ray diffraction, scanning electron microscopy and UV-Vis spectroscopy. The ITO layer thickness increased linearly during the dipping cycles, which permits excellent controllability of the film thickness in the range ∼ 40-1160 nm. After calcination at 550 o C, the initial indium tin hydroxide films were transformed completely to nanocrystalline ITO with cubic and rhombohedral structure. The effects of PVP on the optical, morphological and electrical properties of ITO are discussed.

  19. Synthesis and labelling of 131-I 19-iodocholesterol

    International Nuclear Information System (INIS)

    Barberio, J.C.

    1978-10-01

    The technique for the preparation of ( 131 I)-19-Iodocholesterol is described. The identification of the synthesized compound was made by spectroscopic, chemical and radiochemical techniques. Biological distribution studies in mice demonstrate that the compound can be used for the diagnosis of tumours and hyperplasia of suprarenal glands

  20. Therapeutic Effect of 131I for 230 Patients with Hyperthyroidism

    International Nuclear Information System (INIS)

    He Yujie; Zhang Chengxi; Hu Jiqing; Guo Sihui; Yuan Hui; Li Jing

    2009-01-01

    To evaluate the therapeutic effect of 131 I in treatment of patients with hyperthyroidism and analysis the factors that influence the effect, 230 cases of hyperthyroidism were treated with 131 I, and were followed-up at 1.5, 3, 6, 12 months and even longer time after 131 I radiotherapy. The serum levels of FT3, FT4 and TSH were detected in all cases. The results showed that 181 patients were cured (78.6%), 22 patients were improved (9.5%), 23 cases developed early hypothyroidism(10.0%),and 4 cases developed later hypothyroidism. 12 cases in 27 patients with hypothyroidism treated with thyroxin were recovered, but the other 15 cases need to be given permanent treatment. The factors which influence 131 I radiotherapeutic effect include the patient age, course of disease,application of ATD, size and quality of thyroid, and the level of thyroid hormone. The patients should be followed up to prevent occurrence of hypothyroidism. The early hypothyroidism should be treated in order to decrease the permanent hypothyroidism rate. (authors)

  1. The Relative Frequency of Persistent Hyperthyroidism After I131Therapy

    International Nuclear Information System (INIS)

    Al-EID, M.A.

    1998-01-01

    517 patients with different types of hyperthyroidism who had treated by I 131 therapy were studied. The study demonstrated that diffuse toxic goiter was the most common type of hyperthyroidism. The relative frequency of persistent hyperthyroidism in all types after the first dose of I 131 utilizing our empirical regimen in estimation of therapy doses was low (9.5%). While high frequency of persistent hyperthyroidism among diffuse toxic goiter patients (14%), probably was due to many factors discussed in this paper. Some of these factors are impossible to be estimated precisely and therefore, can not be avoided. But careful dose estimation for each case with diffuse toxic goiter may reduce the rate of retreatment by I 131 . Antithyroid medication prior to I 131 therapy might be another factor resulted in increasing of retreatment of retreatment rate diffuse toxic goiter cases. Longer time interval (more than 5 days) of ceasing antithyroid medication prior therapy is suggested to avoid the effects of these drugs. Patients with other types of hyperthyroidism were not frequently required more than one dose and the frequency of persistent hyperthyroidism was almost negligible

  2. 40 CFR 92.131 - Smoke, data analysis.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Smoke, data analysis. 92.131 Section... analysis. The following procedure shall be used to analyze the smoke test data: (a) Locate each throttle... performed by direct analysis of the recorder traces, or by computer analysis of data collected by automatic...

  3. Methodology for management of therapeutic dose of I-131

    International Nuclear Information System (INIS)

    Basteris M, J.; Gomez D, R.

    2007-01-01

    The present work suggests the use of measures guided to eliminate the resulting chronic sialoadenitis of the treatment previously described with a therapeutic dose bigger than ablative of Iodine 131, as well as the use of citric fruits to stimulate the salivation, the administration of liquid post-dose is included to accelerate the gastric emptying avoiding the secondary effects as the vomit. (Author)

  4. Methodology to administer therapeutic dose of I-131

    International Nuclear Information System (INIS)

    Basteris M, J.; Gomez D, R.

    2007-01-01

    The present work suggests the use of measures guided to eliminate the resulting chronic sialoadenitis of the treatment of the thyroid cancer with Iodine-131, as well as the use of citric fruits to stimulate the salivation, the post-dose administration of liquids to accelerate the gastric emptying avoiding the secondary effects as the vomit is included. (Author)

  5. 40 CFR 86.131-00 - Vehicle preparation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Vehicle preparation. 86.131-00 Section... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles and New Light-Duty Trucks and New Otto-Cycle Complete...

  6. 40 CFR 86.131-96 - Vehicle preparation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Vehicle preparation. 86.131-96 Section... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles and New Light-Duty Trucks and New Otto-Cycle Complete...

  7. Determination of 131I and thorium in urine

    International Nuclear Information System (INIS)

    Tomida, Rute Miwa

    1978-01-01

    Methods for the determination of 131 I and Thorium in urine have been developed taking into account the monitoring needs for people who handle with these radioisotopes. The method for determining 131 I is based in the use of silver chloride to separate iodine by precipitation from the sample; the detection was carried out in a Nal (Tl) well type scintillator connected to a single channel analyser. This method has the following advantages; it is easy and relatively fast as well as selective, showing a separation yield higher than 80%. Thorium in urine was determined by colorimetry after the mineralization of the sample using nitric acid, and sulphuric acid, and then oxygen peroxide. The chromophore reagent used was Thoron (disodium salt of 2-(2-hydroxy-3,6-disulfo-l-naphthylazo) benzenearsonic acid).The absorbance was measured in a spectro colorimeter at a fixed wavelength (530 nm). The method proved to be simple allowing a separation yield of about 80%. The most representative sample for a monitoring program in a 131 I production laboratory has been established. The 131 I concentration in urine of individuals with chronic contamination have also been measured; an interpretation of these results is discussed. (author)

  8. 21 CFR 131.162 - Acidified sour cream.

    Science.gov (United States)

    2010-04-01

    ... HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.162.... (c) Methods of analysis. Referenced methods in paragraphs (c) (1) and (2) of this section are from “Official Methods of Analysis of the Association of Official Analytical Chemists,” 13th Ed. (1980), which is...

  9. 10 CFR 455.131 - State ranking of grant applications.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false State ranking of grant applications. 455.131 Section 455... State ranking of grant applications. (a) Except as provided by § 455.92 of this part, all eligible... audit or energy use evaluation pursuant to § 455.20(k). Each State shall develop separate rankings for...

  10. 30 CFR 816.131 - Cessation of operations: Temporary.

    Science.gov (United States)

    2010-07-01

    ..., revegetation, environmental monitoring, and water treatment activities that will continue during the temporary... Section 816.131 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PERMANENT PROGRAM PERFORMANCE STANDARDS PERMANENT PROGRAM PERFORMANCE STANDARDS-SURFACE MINING...

  11. Experimental radioimmunotherapy with I-131-antibody against a differentiation antigen

    International Nuclear Information System (INIS)

    Badger, C.C.; Krohn, K.A.; Bernstein, I.D.

    1985-01-01

    The authors have previously shown that I-131-labeled antibodies (Ab) against the Thyl.l antigen can care AKR/Cu (Thyl.2+) mice bearing the AKR/J (Thy 1l.1+) SL2 T-cell lymphoma. The authors have now extended these studies to therapy with I-131-anti-Thyl.1 of SL2 lymphoma in AKR/J mice where Ab reacts with both tumor and normal cells. A 25 μg bolus was rapidly cleared from serum by binding to spleen cells (75% with Tl/2 <60 min.) and only low concentrations of Ab(<2% ID/gm) were present in tumor after infusion. Therapy of AKR/J mice bearing established s.c. lymphoma nodules with 1500 μCi I-131-anti-Thyl.1 resulted in complete regression of the nodule in 6/6 animals although tumor eventually regrew and all animals died of metastatic lymphoma. In contrast, I-131-irrelevant Ab given to produce the same amount of whole body radiation (750 μCi) did not affect tumor growth. These studies suggest that radiolabeled-AB against differentiation antigens may be useful for therapy in spite of binding to normal cell populations

  12. Mortality in patients treated for hyperthyroidism with iodine-131

    Energy Technology Data Exchange (ETDEWEB)

    Hall, P.; Lundell, G.; Holm, L.E. (Karolinska Hospital, Stockholm (Sweden))

    1993-03-01

    Causes of death were studied in 10552 Swedish hyperthyroid patients treated with [sup 131]I diagnosed between 1950 and 1975. The patients were followed for an average of 15 years and were matched with the Swedish cause of death register. A total of 5400 deaths were observed and the overall standardized mortality ratio was 1.47. The standardized mortality ratio for females was 1.50 compared to 1.31 in males. The most common cause of death was from cardiovascular diseases. Significantly elevated risks were also seen for tumours, diseases of the endocrine system, respiratory system, gastro-intenstinal system, and congenital malformations. In all causes of death, except tumours and trauma, decreasing standardized mortality ratios over time were seen. Patients followed for more than 10 years had significantly elevated risks for tumours, diseases of the endocrine, respiratory, and cardiovascular systems. Patients given higher [sup 131]I activity and younger patients had higher standardized mortality ratios than those given lower activity and older patients. The hyperthyroidism per se, rather than the [sup 131]I treatment, appeared to be the major explanation for the elevated mortality. 20 refs., 3 tabs.

  13. Mortality in patients treated for hyperthyroidism with iodine-131

    International Nuclear Information System (INIS)

    Hall, P.; Lundell, G.; Holm, L.E.

    1993-01-01

    Causes of death were studied in 10552 Swedish hyperthyroid patients treated with 131 I diagnosed between 1950 and 1975. The patients were followed for an average of 15 years and were matched with the Swedish cause of death register. A total of 5400 deaths were observed and the overall standardized mortality ratio was 1.47. The standardized mortality ratio for females was 1.50 compared to 1.31 in males. The most common cause of death was from cardiovascular diseases. Significantly elevated risks were also seen for tumours, diseases of the endocrine system, respiratory system, gastro-intenstinal system, and congenital malformations. In all causes of death, except tumours and trauma, decreasing standardized mortality ratios over time were seen. Patients followed for more than 10 years had significantly elevated risks for tumours, diseases of the endocrine, respiratory, and cardiovascular systems. Patients given higher 131 I activity and younger patients had higher standardized mortality ratios than those given lower activity and older patients. The hyperthyroidism per se, rather than the 131 I treatment, appeared to be the major explanation for the elevated mortality. 20 refs., 3 tabs

  14. 46 CFR 131.340 - Recommended placard for emergency instructions.

    Science.gov (United States)

    2010-10-01

    ... weathertight door, hatch, and air-port to prevent taking water aboard or further flooding in the vessel. (2) Keep bilges dry to prevent loss of stability from water in bilges. Use power-driven bilge pump, hand... Section 131.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS...

  15. Microdeletion in distal 17p13.1

    DEFF Research Database (Denmark)

    Zeesman, Susan; Kjaergaard, Susanne; Hove, Hanne Buciek

    2012-01-01

    Array comparative genomic hybridization has led to the identification of new syndromes by identifying genomic imbalances not detectable by standard karyotyping methods and by allowing correlations with physical findings. Deletions in the 17p13.1 region have been reported in patients with dysmorphic...

  16. Iodine-131: optimal therapy for hyperthyrodism in children and adolescents

    International Nuclear Information System (INIS)

    Freitas, J.E.; Swanson, D.P.; Gross, M.D.; Sisson, J.C.

    1979-01-01

    To assess the medium- to long-term effects of I-131 therapy of hyperthyroidism in children and adolescents, we studied 51 patients (age range 6 to 18; 8 boys, 43 girls) treated with I-131 for Graves' disease with hyperthyroidism at the University of Michigan Medical Center (1951 to 1972). Patients received total doses ranging from 3 to 81.6 mCi. The mean followup period was 14.6 +- 7.9 yr. Hyperthyroidism was effectively treated in 49 within 1 to 12 months. One patient failed to respond to three treatment doses, and hyperthyroidism recurred in two patients: 2 and 11 yr after initial therapy. Of these three patients, two were treated by thyroidectomy and was retreated successfully with I-131. There were no cases of thyroid cancer, other malignancies or leukemia. The patients' reproductive histories and the health of their offspring were as in the general population. At the time of study, the prevalence of hypothyroidism was 92%, with no recurrent goiters or thyroid nodules. Iodine-131 is found to be safe and effective treatment of hyperthyroidism in children and adolescents and should be the preferred mode of therapy

  17. Longterm results of 131I treatment of hyperthyroidism

    International Nuclear Information System (INIS)

    Hamada, Noboru; Ito, Kunihiko; Mimura, Takashi; Nishikawa, Yoshihiko; Momotani, Naoko

    1979-01-01

    The results of 131 I treatment were analyzed in 512 out of 1,620 cases of hyperthyroid patients treated with 131 I from 1963 to 1967 at Ito Hospital, Tokyo. The incidence of hypothyroidism, diagnosed clinically referring serum T 3 , T 4 and metabolic index, was 28.5%, euthyroidism 66.4% and hyperthyroidism 5.1%. Fourty one percent of euthyroid cases had high levels of serum TSH. While TRH tests were performed in 11 euthyroid cases with normal TSH levels, TSH response was normal in only 3 of the cases. Since there was no difference in the incidence of hypothyroidism among patients receiving a single dose of 6,001 - 7,000, 7,001 - 8,000 and 8,001 - 9,000 rads, relationship between the results of therapy and various factors which might influence the outcome of therapy was investigated in these cases. The incidence of hypothyroidism was higher in patients with shorter period between the onset of hyperthyroid symptoms and 131 I therapy, previous therapy with external irradiation, small goiter, severe exophthalmus, and shorter effective half life of 131 I at the time of treatment. Three cases of thyroid cancer and 2 cases of leukemia were observed in 823 patients which included 311 cases followed up only by inquiry. (author)

  18. 40 CFR 131.10 - Designation of uses.

    Science.gov (United States)

    2010-07-01

    ... must specify appropriate water uses to be achieved and protected. The classification of the waters of..., industrial, and other purposes including navigation. In no case shall a State adopt waste transport or waste... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Designation of uses. 131.10 Section...

  19. 12 CFR 19.131 - Notice of charges and answer.

    Science.gov (United States)

    2010-01-01

    ... PROCEDURE Disciplinary Proceedings Involving the Federal Securities Laws § 19.131 Notice of charges and... associated person. The notice must indicate the type of disciplinary action being contemplated and the... representative shall be deemed to have consented to the issuance of a disciplinary order. (b) All proceedings...

  20. Fixed dose 131-I treatment in Basedow patients

    International Nuclear Information System (INIS)

    Klisarova, A; Bochev, P.; Hristosov, K.

    2003-01-01

    The choice of a treatment for Basedow patients is still unsolved problem. The treatment with 131-I has certain advantages but the determination of the individual therapeutic dose is impossible. The aim of the study is to assess the efficiency of the treatment with a fixed dose. 23 patient have been treated, 30 women and 3 men, age between 48 and 78. All patients are with chronic disease with relapses (1 to 4 relapses). 5 of the patients are with a thyrotoxic heart, 3 - with ophtalmopatia, 2 - with toxic medicamentous hepatitis and 2 with allergies to thyreostatics. Before the treatment with 131-I all patients have been in euthyroid state with normal levels of the peripheral hormones. All patients have received initial doses of 5 mCi 131-I. The hormone levels have been followed on 3rd, 6th, 12th and 24th month after the uptake. From a total of 23 patients, in 3 cases a transitional hypothyroidism has been found between 3th and 6th month, in 3 patients - permanent hypothyroidism. In 5 patients after the 6th month an additional dose of 5 mCi 131-I is given (in one woman a permanent hypothyroidism is reached). Four of the patients have been with a significant thyroid hyperplasia with volume above 60 ml. In three patients in the period between 6th and 12th month a slight hyperthyroidism is registered, which have been suppressed by a low dose thyreostatic. A year after the treatment they have been found euthyroid. The decision for giving a second dose have been based on the evident heptahydrate symptomatic s and the persisting increased thyroid volume. In one case it is observed an acute thyrotoxicosis for 3-5 days after the 131 I uptake. No cases of worsening of the eye symptoms are observed. In conclusion, the treatment with 131 I is a appropriate method for patients with cardiovascular complications, contraindication for surgery or side effects of the thyreostatic treatment. the dose od 5 mCi is sufficient for patients with mild to medium form of Basedow disease and a

  1. 131I therapy for hyperthyroidism with large goitre

    International Nuclear Information System (INIS)

    Zhang Chenggang

    2002-01-01

    Objective: This retrospective analysis is to study the effects of radioiodine in hyperthyroidism with large goitre and observe the possibility to take the place of surgery. Methods: 82 patients (pts) with hyperthyroidism including 51 female and 31 male, age ranging from 11 to 75 years old (mean 35.43 ± 12.14), were treated with 131 I. All patients presented with typical clinical and biochemical hyperthyroidism and were followed up for 3-38 months after 131 I treatment. Patients were categorized into 2 diagnostic groups: Graves disease (43 pts) and toxic multinodular goitres (39 pts). Gland weights were estimated by palpation and scintigraphy. Cold nodule had not been found in scintigraphy in all pts. The dose in mCi administered were determined according to therapeutic history, thyroid weight (g), rate of uptake 131 I, patient's symptoms and course of disease, etc. 76 pts (92.7%) had iII degree goitre. Goitre weight was stratified into 150-200 g (67 pts), 201-300 g (13 pts) and 400-500 g (2pts). 71 pts (86.6%) were given one dose of 131 I, 10 pts (12.2%) two doses, one patient had three doses. The mean first dose was 39.26 ± 19.63 mCi (14-130 mCi). The mean first μCi/g was 142.89±32.29 μCi (59-200). Results: 24 pts (29.3%) had complete remission (euthyroid), 19 pts (23.2%) had partial resolution. 39 (47.6%) pts had hypothyroidism (HP) including 8 permanent HP, 11 transient HP, 3 subclinical HP and 17 indeterminate HP. The later group had HP that could not be decided to be transient or permanent because the time of following up was less than one year. After 131 I therapy, goitres of 43 pts (52.4%) became 0 degree, 34 pts (41.5%) became I degree, 4 pts (4.9%) had II degree and only one pt still had a III degree goitre. Conclusions: 131 I therapy is a safe and effective method for treating hyperthyroidism with large goitre. If the large goitre does not have cold nodule in scintigraphy, 131 I treatment may replace surgery

  2. Comparative biodistribution profile of [131I]VIP and [131I]VIP10-28

    Directory of Open Access Journals (Sweden)

    Maria Tereza Colturato

    2005-10-01

    Full Text Available Various tumor cells express significantly higher amounts of VIP receptors (VIPR that provided the basis for the clinical use of radiolabeled VIP for the in vivo localization of tumors. This work studied the labeling of VIP and VIP10-28 with iodine-131 to compare the biological distribution of the labeled compounds in Nuce mice and the affinity for tumor cells. Both VIP and VIP10-28 peptides contain two tyrosine residues, in positions 10 and 22, that are theoretically equally susceptible to radioiodination employing oxidative electrophilic substitution using oxidizing agents like Chloramine T. Radiochemical purity of the reaction mixture was determined by electrophoresis and HPLC. The VIP peptide and the fragment were labeled with radioiodine with good radiochemical yield (above 96%. Suitable, but important differences can be observed in biological distribution studies. Comparatively, blood clearance was faster for labeled VIP and perhaps because of this, the uptake in tumor was lower, especially during the first hour. These differences observed in the biological distribution of the compounds can be related to the lipophilicity of the labeled compounds.Várias células tumorais expressam significantemente uma alta quantidade de receptores VIP (VIPR que determinam a base para o uso clínico de VIP radiomarcado para localização de tumores in vivo. Foi estudado neste trabalho a marcação do VIP e do fragmento VIP10-28 com iodo-131 comparando a distribuição biológica dos compostos marcados em camundongos Nude e sua afinidade pelas células tumorais. Ambos os peptídeos, VIP e VIP10-28. contém dois resíduos de tirosina nas posições 10 e 22, que teoricamente são igualmente susceptíveis pela substituição eletrofílica oxidativa do radioiodo utilizando Cloramina T como agente oxidante. A pureza radioquímica da mistura de reação foi determinada por eletroforese e cromatografia líquida de alta eficiência (CLAE. O VIP e fragmento foram

  3. Microstructure and growth mechanism of tin whiskers on RESn3 compounds

    International Nuclear Information System (INIS)

    Li Caifu; Liu Zhiquan

    2013-01-01

    Graphical abstract: Large amount of intact tin whiskers were firstly prepared without post handling, and their microstructures were investigated systematically with TEM. A growth model was proposed to explain the observed growth characteristics from Sn–RE alloys. - Abstract: An exclusive method was developed to prepare intact tin whiskers as transmission electron microscope specimens, and with this technique in situ observation of tin whisker growth from RESn 3 (RE = Nd, La, Ce) film specimen was first achieved. Electron irradiation was discovered to have an effect on the growth of a tin whisker through its root. Large quantities of tin whiskers with diameters from 20 nm to 10 μm and lengths ranging from 50 nm to 500 μm were formed at a growth rate of 0.1–1.8 nm s −1 on the surface of RESn 3 compounds. Most (>85%) of these tin whiskers have preferred growth directions of 〈1 0 0〉, 〈0 0 1〉, 〈1 0 1〉 and 〈1 0 3〉, as determined by statistics. This kind of tin whisker is single-crystal β-Sn even if it has growth striations, steps and kinks, and no dislocations or twin or grain boundaries were observed within the whisker body. RESn 3 compounds undergo selective oxidation during whisker growth, and the oxidation provides continuous tin atoms for tin whisker growth until they are exhausted. The driving force for whisker growth is the compressive stress resulting from the restriction of the massive volume expansion (38–43%) during the oxidation by the surface RE(OH) 3 layer. Tin atoms diffuse and flow to feed the continuous growth of tin whiskers under a compressive stress gradient formed from the extrusion of tin atoms/clusters at weak points on the surface RE(OH) 3 layers. A growth model was proposed to discuss the characteristics and growth mechanism of tin whiskers from RESn 3 compounds.

  4. Design and construction of a shielded process box for the production of radiopharmaceuticals labelled with 131I

    International Nuclear Information System (INIS)

    Bonetto, O.; Goso, R.; Guerrero, G.; Huala, H.E.; Logusso, N.A.; Marques, R.; Mitta, A.E.A.

    1976-07-01

    A leakproof process box, shielded with a 5 mm lead wall, for the labelling, purification, pH adjutment and dispensing of Rose Bengal 131 I, Hippuran 131 I, Diprocon 131 I, Hipaque 131 I, Bromosuphthalein 131 I, etc. is described. (author) [es

  5. Defect Engineering and Interface Phenomena in Tin Oxide

    KAUST Repository

    Albar, Arwa

    2017-04-05

    The advance in transparent electronics requires high-performance transparent conducting oxide materials. The microscopic properties of these materials are sensitive to the presence of defects and interfaces and thus fundamental understanding is required for materials engineering. In this thesis, first principles density functional theory is used to investigate the possibility of tuning the structural, electronic and magnetic properties of tin oxide by means of defects and interfaces. Our aim is to reveal unique properties and the parameters to control them as well as to explain the origin of unique phenomena in oxide materials. The stability of native defect in tin monoxide (SnO) under strain is investigated using formation energy calculations. We find that the conductivity (which is controlled by native defects) can be switched from p-type to either n-type or undoped semiconducting by means of applied pressure. We then target inducing magnetism in SnO by 3d transition metal doping. We propose that V doping is efficient to realize spin polarization at high temperature. We discuss different tin oxide interfaces. Metallic states are found to form at the SnO/SnO2 interface with electronic properties that depend on the interface terminations. The origin of these states is explained in terms of charge transfer caused by chemical bonding and band alignment. For the SnO/SnO2 heterostructure, we observe the formation of a two dimensional hole gas at the interface, which is surprising as it cannot be explained by the standard polar catastrophe model. Thus, we propose a charge density discontinuity model to explain our results. The model can be generalized to other polar-polar interfaces. Motivated by technological applications, the electronic and structural properties of the MgO (100)/SnO2 (110) interface are investigated. Depending on the interface termination, we observe the formation of a two dimensional electron gas or spin polarized hole gas. Aiming to identify further

  6. Evaluation of {sup 131}I retention in several adsorbers

    Energy Technology Data Exchange (ETDEWEB)

    Catanoso, Marcela F.; Osso Junior, Joao Alberto, E-mail: marcela.forli@gmail.co, E-mail: jaosso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Diretoria de Radiofarmacia

    2011-07-01

    Several iodine radioisotopes are used in nuclear medicine for treatment and diagnostic purposes. The radioisotope {sup 131}I is used both in diagnosis and therapy due to its physical characteristics of decay by {beta}{sup -} and its {gamma}-ray emissions suitable for diagnosis. It is routinely produced at IPEN through the irradiation of TeO{sub 2} targets in the IEA-R1m nuclear reactor. After the irradiation, the {sup 131}I is separated by dry distillation, where the targets are put in an oven, heated at 760 deg C for 2 hours and the {sup 131}I, volatile, is carried by an O{sub 2} gas stream. The aim of this work was to evaluate the retention and elution of {sup 131}I samples produced at IPEN in several adsorbers as part of a project aiming the purification of these radioisotopes, allowing the labeling of biomolecules. Samples of {sup 131}I were used for retention and elution studies with the following adsorbers: commercial cartridges, anionic resin columns and cationic resin column. The results showed that Ag cartridges and anionic resins Dowex 1X8, Dowex 3 and IRA 400 had a great iodine retention but no elution after using specific eluents. The QMA light, acid alumina, neutral alumina and cationic resin Dowex 50WX4 showed high retention and elution and QMA plus and cationic resin Dowex 50WX8 and Dowex 50WX12 had a good retention but lower elution. Regarding to the better retention and elution, Ag cartridges and resins showed a higher percentage of iodine retention but lower elution yield and QMA light, acid and neutral alumina cartridges showed better results. (author)

  7. Evaluation of 131I retention in several adsorbers

    International Nuclear Information System (INIS)

    Catanoso, Marcela F.; Osso Junior, Joao Alberto

    2011-01-01

    Several iodine radioisotopes are used in nuclear medicine for treatment and diagnostic purposes. The radioisotope 131 I is used both in diagnosis and therapy due to its physical characteristics of decay by β - and its γ-ray emissions suitable for diagnosis. It is routinely produced at IPEN through the irradiation of TeO 2 targets in the IEA-R1m nuclear reactor. After the irradiation, the 131 I is separated by dry distillation, where the targets are put in an oven, heated at 760 deg C for 2 hours and the 131 I, volatile, is carried by an O 2 gas stream. The aim of this work was to evaluate the retention and elution of 131 I samples produced at IPEN in several adsorbers as part of a project aiming the purification of these radioisotopes, allowing the labeling of biomolecules. Samples of 131 I were used for retention and elution studies with the following adsorbers: commercial cartridges, anionic resin columns and cationic resin column. The results showed that Ag cartridges and anionic resins Dowex 1X8, Dowex 3 and IRA 400 had a great iodine retention but no elution after using specific eluents. The QMA light, acid alumina, neutral alumina and cationic resin Dowex 50WX4 showed high retention and elution and QMA plus and cationic resin Dowex 50WX8 and Dowex 50WX12 had a good retention but lower elution. Regarding to the better retention and elution, Ag cartridges and resins showed a higher percentage of iodine retention but lower elution yield and QMA light, acid and neutral alumina cartridges showed better results. (author)

  8. Treatment of hyperthyroidism by 131-iodine; Traitement des hyperthyroidies par l'iode 131: dose calculee versus dose fixe

    Energy Technology Data Exchange (ETDEWEB)

    Fieffe, S.; Cuif-Joba, A.; Testard, A.; Fortuna, I.; Pocharta, J.M.; Papathanassioua, D.; Schvartz, C. [Service d' endocrinologie et medecine nucleaires, institut Jean-Godinot, 1, rue du General Koeing, 51056 Reims, (France)

    2009-05-15

    In a first time, we chose to modify the dose to be administered, on using always the Marinelli formula but on increasing the absorbed dose. In a second time, we wanted to simplify the determination of the dose to be administered by modulating it only in function of the thyroid volume. Two groups of patients were managed for hyperthyroidism recurrence. In a first group the iodine dose ({sup 131}I) was determined with the help of the simplified Marinelli formula: chosen absorbed dose was 150 Gy, gland volume determined by echography, measurement of the fixation at the sixth hour. In the second group, the thyroid volume was determined by echography. The patients with a thyroid from 5 to 30 g received 185 MBq, from 30 to 50 g 370 MBq and superior to 50 g 555 MBq of iodine 131. The two groups of patients have the same characteristics. the results of treatment by iodine 131, evaluated on the dosages of T4L and TSH at three and six months, show the preservation of euthyroidism or the passage in hypothyroidism among 94% of patients in the group 1 and 80% of patients in the group 2. These results are not significantly different. The easiness of the realisation of the treatment in the group 2 lead us to continue this simplified therapy scheme that allows equally to improve the radiation protection of medical personnel by avoiding the use of iodine 131. (N.C.)

  9. Determination of {sup 131}I and thorium in urine; Determinacao de iodo-131 e torio em urina

    Energy Technology Data Exchange (ETDEWEB)

    Tomida, Rute Miwa

    1978-07-01

    Methods for the determination of {sup 131}I and Thorium in urine have been developed taking into account the monitoring needs for people who handle with these radioisotopes. The method for determining {sup 131}I is based in the use of silver chloride to separate iodine by precipitation from the sample; the detection was carried out in a Nal (Tl) well type scintillator connected to a single channel analyser. This method has the following advantages; it is easy and relatively fast as well as selective, showing a separation yield higher than 80%. Thorium in urine was determined by colorimetry after the mineralization of the sample using nitric acid, and sulphuric acid, and then oxygen peroxide. The chromophore reagent used was Thoron (disodium salt of 2-(2-hydroxy-3,6-disulfo-l-naphthylazo) benzenearsonic acid).The absorbance was measured in a spectro colorimeter at a fixed wavelength (530 nm). The method proved to be simple allowing a separation yield of about 80%. The most representative sample for a monitoring program in a {sup 131}I production laboratory has been established. The {sup 131}I concentration in urine of individuals with chronic contamination have also been measured; an interpretation of these results is discussed. (author)

  10. Methodology for management of therapeutic dose of I-131; Metodologia para administrar dosis terapeutica de I-131

    Energy Technology Data Exchange (ETDEWEB)

    Basteris M, J.; Gomez D, R. [Universidad Autonoma de Yucatan, Facultad de Medicina, Merida, Yucatan (Mexico)

    2007-07-01

    The present work suggests the use of measures guided to eliminate the resulting chronic sialoadenitis of the treatment previously described with a therapeutic dose bigger than ablative of Iodine 131, as well as the use of citric fruits to stimulate the salivation, the administration of liquid post-dose is included to accelerate the gastric emptying avoiding the secondary effects as the vomit. (Author)

  11. Effective Half-life of I-131 in Patients with Differentiated Thyroid Cancer Treated by Radioactive I-131

    Energy Technology Data Exchange (ETDEWEB)

    Park, Seok Gun [Dankook University, Cheonan (Korea, Republic of)

    2008-12-15

    Effective half life of I-131 (T{sub eff}) in patients with differentiated thyroid cancer treated by I-131 is must-know value for dose calculation and determination of release time from isolation room. There has been no report about T{sub eff} in Koreans. Thus, author tried to measure dose rate without radiation exposure to faculty members and calculated T{sub eff}. Probe of radiation survey meter was fixed at the wall of isolation room, and body of survey meter was placed outside the room. With this simple arrangement, author could measure radiation frequently without radiation exposure to faculty members in 68 patient (F=55, M=13, age=47{+-}13.7) treated by I-131 (3.7{approx}7.4 GBq) for differentiated thyroid cancer from Jan 2006 to Dec 2006. From this data, T{sub eff}, 48 hr retention rate, and the time necessary to whole body retention of I-131 become less than 1.1 GBq were calculated. Serum creatinine levels were measured before and after thyroid hormone withdrawal. T{sub eff} was 15.4{+-}4.3 hr (9.4{approx}32.5 hr). There was a loose correlation between T{sub eff} and serum creatinine concentration (r=0.45). 48hr retention was 4.9{+-}4.2% (1{approx}23%). Time necessary to whole body retention of I-131 become less than 1.1 GBq was calculated as 47.1{+-}13.2 hr for 9.25 GBq, 42.1{+-}11.9 hr for 7.4 GBq, 35.7{+-}10.0 hr for 5.55 GBq, and 26.7{+-}7.5 hr for 3.7 GBq dose of I-131. Author successfully measured radiation dose rates in isolated patients treated by high dose of I-131 without radiation exposure to the faculty members with simple arrangement of survey meter probe. Using those data, T{sub eff} and some other indices were calculated.

  12. Characterization of tin dioxide film for chemical vapors sensor

    International Nuclear Information System (INIS)

    Hafaiedh, I.; Helali, S.; Cherif, K.; Abdelghani, A.; Tournier, G.

    2008-01-01

    Recently, oxide semiconductor material used as transducer has been the central topic of many studies for gas sensor. In this paper we investigated the characteristic of a thick film of tin dioxide (SnO 2 ) film for chemical vapor sensor. It has been prepared by screen-printing technology and deposited on alumina substrate provided with two gold electrodes. The morphology, the molecular composition and the electrical properties of this material have been characterized respectively by Atomic Force Spectroscopy (AFM), Fourier Transformed Infrared Spectroscopy (FTIR) and Impedance Spectroscopy (IS). The electrical properties showed a resistive behaviour of this material less than 300 deg. C which is the operating temperature of the sensor. The developed sensor can identify the nature of the detected gas, oxidizing or reducing

  13. Molybdenum-tin as a solar cell metallization system

    Science.gov (United States)

    Boyd, D. W.; Radics, C.

    1981-01-01

    The operations of solar cell manufacture are briefly examined. The formation of reliable, ohmic, low-loss, and low-cost metal contacts on solar cells is a critical process step in cell manufacturing. In a commonly used process, low-cost metallization is achieved by screen printing a metal powder-glass frit ink on the surface of the Si surface and the conductive metal powder. A technique utilizing a molybdenum-tin alloy for the metal contacts appears to lower the cost of materials and to reduce process complexity. The ink used in this system is formulated from MoO3 with Sn powder and a trace amount of titanium resonate. Resistive losses of the resulting contacts are low because the ink contains no frit. The MoO3 is finally melted and reduced in forming gas (N2+H2) to Mo metal. The resulting Mo is highly reactive which facilitates the Mo-Si bonding.

  14. Genotoxicity of indium tin oxide by comet test

    Directory of Open Access Journals (Sweden)

    İbrahim Hakkı Ciğerci

    2015-06-01

    Full Text Available Indium tin oxide (ITO is used for liquid crystal display (LCDs, electrochromic displays, flat panel displays, field emission displays, touch or laptop computer screens, cell phones, energy conserving architectural windows, defogging aircraft and automobile windows, heat-reflecting coatings to increase light bulb efficiency, gas sensors, antistatic window coatings, wear resistant layers on glass, nanowires and nanorods because of its unique properties of high electrical conductivity, transparency and mechanical resistance.Genotoxic effects of ITO were investigated on the root cells of Allium cepa by Comet assay. A. cepa roots were treated with the aqueous dispersions of ITO at 5 different concentrations (12.5, 25, 50, 75, and 100 ppm for 4 h. A significant increase in DNA damage was a observed at all concentrations of ITO by Comet assay. These result indicate that ITO exhibit genotoxic activity in A. cepa root meristematic cells.

  15. Chemical Thermodynamics Vol. 12 - Chemical Thermodynamics of tin

    International Nuclear Information System (INIS)

    Gamsjaeger, Heinz; GAJDA, Tamas; Sangster, James; Saxena, Surendra K.; Voigt, Wolfgang; Perrone, Jane

    2012-01-01

    This is the 12th volume of a series of expert reviews of the chemical thermodynamics of key chemical elements in nuclear technology and waste management. This volume is devoted to the inorganic species and compounds of tin. The tables contained in Chapters III and IV list the currently selected thermodynamic values within the NEA TDB Project. The database system developed at the NEA Data Bank, see Section II.6, assures consistency among all the selected and auxiliary data sets. The recommended thermodynamic data are the result of a critical assessment of published information. The values in the auxiliary data set, see Tables IV-1 and IV-2, have been adopted from CODATA key values or have been critically reviewed in this or earlier volumes of the series

  16. Determination of stannous tin in radiopharmaceutical cold kits

    International Nuclear Information System (INIS)

    Farrant, A.J.

    1979-01-01

    Two methods for determining stannous tin in 'cold kits', used for the preparation of Tc-99m labelled radiopharmaceuticals, have been developed. Both are based on the direct titration of the Sn2 in solution. In the first method titration is with N-bromosuccinimide. Of the materials commonly used as cold kits only albumin has been found to interfere with the determination. The second method is a standard iodometric titration in which starch is used as indicator. None of the materials tested interfere with this procedure. The N-bromosuccinimide method is the method of choice as the re-agent, a solid, can be used without prior standardization. Iodine solution must be standardized daily. The paper describes in detail the methods used and gives examples of kits in which the Sn2 levels have been determined using the described procedures

  17. Gas Sensing Properties of Indium Tin Oxide Nanofibers

    Directory of Open Access Journals (Sweden)

    Shiyou Xu

    2009-11-01

    Full Text Available Indium Tin Oxide (ITO nanofibers were fabricated by the electrospinning process. The morphology and crystal structure of ITO nanofibers were studied by SEM, XRD, and TEM respectively. The results showed that polycrystalline ITO nanofibers with an average diameter of 80 nm were obtained. Sensors based on these nanofibers were fabricated by collecting these nanofibers on the integrated sensor platforms. The ITO nanofiber-based sensors showed very fast and high sensor responses at both room and elevated temperatures for NO2. The ratios of resistance in NO2 over that in air were 5 at room temperature and 34 at the optimal working temperature, respectively. The ITO nanofiber-based sensor can be repeatedly used. The details for the fast, enhanced sensor responses and the optimal temperature were discussed.

  18. Etiology of lung cancer at the Gejiu tin mine, China

    International Nuclear Information System (INIS)

    Sun, S.Q.

    1987-01-01

    There were 1,724 lung cancer cases registered at the Yunnan Tin Corporation in the period 1954-1986, of which 90% had a history of working underground. Previous exposure to radon, and radon daughters and arsenic is considered to be responsible for the high incidence of lung cancer in these miners. Arsenic may come from inhalation of arsenic-containing ore dust or other environmental arsenic pollution. It appears that radon exposure accounts to a greater extent than arsenic for the increase of lung cancer in these miners. Pathological study was made of 100 surgically resected lung cancer specimens. In this way the distribution and composition of dust retention was determined in relation to peripheral lung cancer

  19. Surface modification of commercial tin coatings by carbon ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, L J; Sood, D K; Manory, R R [Royal Melbourne Inst. of Tech., VIC (Australia)

    1994-12-31

    Commercial TiN coatings of about 2 {mu}m thickness on high speed steel substrates were implanted at room temperature with 95 keV carbon ions at nominal doses between 1 x 10{sup 17} - 8x10{sup 17} ions cm{sup -2}. Carbon ion implantation induced a significant improvement in ultramicrohardness, friction coefficient and wear properties. The surface microhardness increases monotonically by up to 115% until a critical dose is reached. Beyond this dose the hardness decreases, but remains higher than that of unimplanted sample. A lower friction coefficient and a longer transition period towards a steady state condition were obtained by carbon ion implantation. The changes in tribomechanical properties are discussed in terms of radiation damage and possible formation of a second phase rich in carbon. 6 refs., 3 figs.

  20. Modeling dynamic beta-gamma polymorphic transition in Tin

    Science.gov (United States)

    Chauvin, Camille; Montheillet, Frank; Petit, Jacques; CEA Gramat Collaboration; EMSE Collaboration

    2015-06-01

    Solid-solid phase transitions in metals have been studied by shock waves techniques for many decades. Recent experiments have investigated the transition during isentropic compression experiments and shock-wave compression and have highlighted the strong influence of the loading rate on the transition. Complementary data obtained with velocity and temperature measurements around the polymorphic transition beta-gamma of Tin on gas gun experiments have displayed the importance of the kinetics of the transition. But, even though this phenomenon is known, modeling the kinetic remains complex and based on empirical formulations. A multiphase EOS is available in our 1D Lagrangian code Unidim. We propose to present the influence of various kinetic laws (either empirical or involving nucleation and growth mechanisms) and their parameters (Gibbs free energy, temperature, pressure) on the transformation rate. We compare experimental and calculated velocities and temperature profiles and we underline the effects of the empirical parameters of these models.

  1. Coordination compounds of titanium, zirconium, tin, thorium and uranium

    International Nuclear Information System (INIS)

    Deshpande, S.G.; Jain, S.C.

    1990-01-01

    Reactions of isatin, furoic acid and picolinic acid have been carried out with titanium tetrachloride, tin tetrachloride, thorium tetrachloride, zirconyl chloride and uranyl nitrate. While 2:3(metal:ligand) type compounds of isatin have been obtained with Ti(IV) and Sn(IV), zirconium(IV), thorium(IV), and uranium(VI) do not react with the ligand under similar experimental conditions. Furoic acid (FAH) and picolinic acid(PicH) form various chloro furoates and picolinates when reacted with TiCl 4 , ZrOCl 2 and ThCl 4 , but do not react with SnCl 4 . The various compounds synthesised have been characterised on the basis of elemental analysis, infrared studies, conductivity and thermogravimetric measurements. (author). 1 tab., 10 refs

  2. Light emission from silicon with tin-containing nanocrystals

    Directory of Open Access Journals (Sweden)

    Søren Roesgaard

    2015-07-01

    Full Text Available Tin-containing nanocrystals, embedded in silicon, have been fabricated by growing an epitaxial layer of Si1−x−ySnxCy, where x = 1.6 % and y = 0.04 % on a silicon substrate, followed by annealing at various temperatures ranging from 650 ∘C to 900 ∘C. The nanocrystal density and average diameters are determined by scanning transmission-electron microscopy to ≈1017 cm−3 and ≈5 nm, respectively. Photoluminescence spectroscopy demonstrates that the light emission is very pronounced for samples annealed at 725 ∘C, and Rutherford back-scattering spectrometry shows that the nanocrystals are predominantly in the diamond-structured phase at this particular annealing temperature. The origin of the light emission is discussed.

  3. Determination of tin(II) in reagents for radiopharmaceuticals

    International Nuclear Information System (INIS)

    Morosanova, E.I.; Loginova, K. A.; Epstein, N.B.

    2003-01-01

    The goal of this work is to elaborate a procedure for rapid and simple determination of tin(II) in reagents for preparation of radiopharmaceuticals based on a system albumin-Tc-99m. Original test tools for the determination of various analytes have been suggested in our lab based on the use of small glass tubes (1-2 mm i.d. - 50-70 mm) filled with indicator powders containing suitable immobilized chromogenic reagents. An analytical signal (a length of colored zone which is proportional to the concentration of an analyte) is detected after a sample passing through the indicator tube. Heteropoly compounds are well-known analytical reagents for a photometric determination of various reductants. For elaboration of indicator tubes abilities of Mo,P-heteropoly compounds to give deeply colored blue compounds after reduction were used. (authors)

  4. Surface modification of commercial tin coatings by carbon ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, L.J.; Sood, D.K.; Manory, R.R. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Commercial TiN coatings of about 2 {mu}m thickness on high speed steel substrates were implanted at room temperature with 95 keV carbon ions at nominal doses between 1 x 10{sup 17} - 8x10{sup 17} ions cm{sup -2}. Carbon ion implantation induced a significant improvement in ultramicrohardness, friction coefficient and wear properties. The surface microhardness increases monotonically by up to 115% until a critical dose is reached. Beyond this dose the hardness decreases, but remains higher than that of unimplanted sample. A lower friction coefficient and a longer transition period towards a steady state condition were obtained by carbon ion implantation. The changes in tribomechanical properties are discussed in terms of radiation damage and possible formation of a second phase rich in carbon. 6 refs., 3 figs.

  5. Surface modification of commercial tin coatings by carbon ion implantation

    International Nuclear Information System (INIS)

    Liu, L.J.; Sood, D.K.; Manory, R.R.

    1993-01-01

    Commercial TiN coatings of about 2 μm thickness on high speed steel substrates were implanted at room temperature with 95 keV carbon ions at nominal doses between 1 x 10 17 - 8x10 17 ions cm -2 . Carbon ion implantation induced a significant improvement in ultramicrohardness, friction coefficient and wear properties. The surface microhardness increases monotonically by up to 115% until a critical dose is reached. Beyond this dose the hardness decreases, but remains higher than that of unimplanted sample. A lower friction coefficient and a longer transition period towards a steady state condition were obtained by carbon ion implantation. The changes in tribomechanical properties are discussed in terms of radiation damage and possible formation of a second phase rich in carbon. 6 refs., 3 figs

  6. Construction of an open tin cell at Inmetro

    Science.gov (United States)

    da Silva, R.; Teixeira, R. N.

    2013-09-01

    For the last decade, the Thermometry Laboratory of the National Institute of Metrology, Quality and Technology (INMETRO) has been developing its own primary standards. In late 2010, a brand new fixed point cell containing high purity tin (99.9999 %) was constructed as the continuation of a project for constructing metal fixed-point cells in the positive range, in accordance with the temperature fixed-points described by the International Temperature Scale of 1990 (ITS-90) [1]. This is the fourth temperature fixed-point constructed by the laboratory team, which enables the performance of some calibrations without having to rely solely on commercially available cells. The materials and their preparation, the design, the procedures for the construction of the cell, the equipment, the investigation on its performance and its results will be detailed in the present paper. In addition, it is worth mentioning that this cell has recently taken part in a bilateral comparison with the National Physical Laboratory - NPL.

  7. Systematics of the electric dipole response in stable tin isotopes

    Science.gov (United States)

    Bassauer, Sergej; von Neumann-Cosel, Peter; Tamii, Atsushi

    2018-05-01

    The electric dipole is an important property of heavy nuclei. Precise information on the electric dipole response provides information on the electric dipole polarisability which in turn allows to extract important constraints on neutron-skin thickness in heavy nuclei and parameters of the symmetry energy. The tin isotope chain is particularly suited for a systematic study of the dependence of the electric dipole response on neutron excess as it provides a wide mass range of accessible isotopes with little change of the underlying structure. Recently an inelastic proton scattering experiment under forward angles including 0º on 112,116,124Sn was performed at the Research Centre for Nuclear Physics (RCNP), Japan with a focus on the low-energy dipole strength and the polarisability. First results are presented here. Using data from an earlier proton scattering experiment on 120Sn the gamma strength function and level density are determined for this nucleus.

  8. Systematics of the electric dipole response in stable tin isotopes

    Directory of Open Access Journals (Sweden)

    Bassauer Sergej

    2018-01-01

    Full Text Available The electric dipole is an important property of heavy nuclei. Precise information on the electric dipole response provides information on the electric dipole polarisability which in turn allows to extract important constraints on neutron-skin thickness in heavy nuclei and parameters of the symmetry energy. The tin isotope chain is particularly suited for a systematic study of the dependence of the electric dipole response on neutron excess as it provides a wide mass range of accessible isotopes with little change of the underlying structure. Recently an inelastic proton scattering experiment under forward angles including 0º on 112,116,124Sn was performed at the Research Centre for Nuclear Physics (RCNP, Japan with a focus on the low-energy dipole strength and the polarisability. First results are presented here. Using data from an earlier proton scattering experiment on 120Sn the gamma strength function and level density are determined for this nucleus.

  9. The electric dipole response of neutron rich tin isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Horvat, Andrea; Aumann, Thomas; Rossi, Dominic; Schindler, Fabia [Institut fuer Kernphysik, TU Darmstadt (Germany); Boretzky, Konstanze [GSI Helmholzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Johansen, Jacob [Aarhus University (Denmark); Schrock, Philipp [The University of Tokyo (Japan); Collaboration: R3B-Collaboration

    2016-07-01

    Studies of the dipole response in medium heavy and heavy neutron rich nuclei reveal valuable information about the isospin dependence of the nuclear equation of state. Therefore an experimental campaign investigating both the electric dipole response via Coulomb excitation and neutron removal along the tin isotope chain ({sup 124-134}Sn) has been carried out at the R3B (Reactions with Relativistic Radioactive Beams) setup at GSI (Helmholtzzentrum fuer Schwerionenforschung) for which the analysis is ongoing. The E1 response was induced via relativistic Coulomb scattering by a lead target in inverse kinematics, and calls for a kinematically complete determination of all reaction products in order to reconstruct the excitation energy by means of the invariant mass method. The goal is to obtain the Coulomb excitation cross section up to the adiabatic cut-off energy, covering the giant dipole resonance (GDR) range.

  10. Influence of Microstructure on the Electrical Properties of Heteroepitaxial TiN Films

    Science.gov (United States)

    Xiang, Wenfeng; Liu, Yuan; Zhang, Jiaqi

    2018-03-01

    Heteroepitaxial TiN films were deposited on Si substrates by pulse laser deposition at different substrate temperature. The microstructure and surface morphology of the films were investigated by X-ray diffraction (θ-2θ scan, ω-scan, and ϕ-scan) and atomic force microscopy. The electrical properties of the prepared TiN films were studied using a physical property measurement system. The experimental results showed that the crystallinity and surface morphology of the TiN films were improved gradually with increasing substrate temperature below 700 °C. Specially, single crystal TiN films were prepared when substrate temperature is above 700 °C; However, the quality of TiN films gradually worsened when the substrate temperature was increased further. The electrical properties of the films were directly correlated to their crystalline quality. At the optimal substrate temperature of 700 °C, the TiN films exhibited the lowest resistivity and highest mobility of 25.7 μΩ cm and 36.1 cm2/V s, respectively. In addition, the mechanism concerning the influence of substrate temperature on the microstructure of TiN films is discussed in detail.

  11. Determination of total tin in silicate rocks by graphite furnace atomic absorption spectrometry

    Science.gov (United States)

    Elsheimer, H.N.; Fries, T.L.

    1990-01-01

    A method is described for the determination of total tin in silicate rocks utilizing a graphite furnace atomic absorption spectrometer with a stabilized-temperature platform furnace and Zeeman-effect background correction. The sample is decomposed by lithium metaborate fusion (3 + 1) in graphite crucibles with the melt being dissolved in 7.5% hydrochloric acid. Tin extractions (4 + 1 or 8 + 1) are executed on portions of the acid solutions using a 4% solution of tricotylphosphine oxide in methyl isobutyl ketone (MIBK). Ascorbic acid is added as a reducing agent prior to extraction. A solution of diammonium hydrogenphosphate and magnesium nitrate is used as a matrix modifier in the graphite furnace determination. The limit of detection is > 10 pg, equivalent to > 1 ??g l-1 of tin in the MIBK solution or 0.2-0.3 ??g g-61 in the rock. The concentration range is linear between 2.5 and 500 ??g l-1 tin in solution. The precision, measured as relative standard deviation, is < 20% at the 2.5 ??g l-1 level and < 7% at the 10-30 ??g l-1 level of tin. Excellent agreement with recommended literature values was found when the method was applied to the international silicate rock standards BCR-1, PCC-1, GSP-1, AGV-1, STM-1, JGb-1 and Mica-Fe. Application was made to the determination of tin in geological core samples with total tin concentrations of the order of 1 ??g g-1 or less.

  12. Technical problems associated with the production of technetium Tc 99m tin(II) pyrophosphate kits

    International Nuclear Information System (INIS)

    Kowalsky, R.J.; Dalton, D.R.

    1981-01-01

    The amount of tin(II) required for adequate reduction, complexation, and stability of technetium Tc 99m pertechnetate in radiopharmaceutical kits, and methods of preventing the loss of tin(II) during formulation of these lyophilized kits are investigated. Tin(II) loss from stannous chloride solutions was studied under several conditions, including room air versus nitrogen atmospheres, during vial filling in a laminar-flow hood with samples frozen on dry ice versus samples at room temperature, during lyophilization, and during storage under refrigerated, ambient, and elevated temperatures. Various amounts of stannous chloride, ranging from 5 to 1000 microgram/ml, were used in formulating sodium pertechnetate Tc 99m kits containing 100 mCi technetium Tc 99m and 0.4 microgram total technetium. Samples were removed at various times; hydrolyzed technetium, pertechnetate, and technetium Tc 99m pyrophosphate were isolated on instant thin-layer chromatography-silica gel and quantified with a scintillation counter. The time necessary to deoxygenate distilled water by nitrogen purging was measured. Several sources of stannous chloride were assayed for tin(II) content. Tin(II) loss occurs rapidly in solution (15% in one hour) unless continuously protected with nitrogen, and during vial filling in a laminar-flow hood unless frozen with dry ice. No substantial loss of tin(II) was detected during lyophilization or during storage of lyophilized product at any of the three temperatures. A minimum of 400 microgram tin(II) was required to provide 90% technetium Tc 99m pyrophosphate at six hours after preparation. Adequate deoxygenation of small quantities (450 ml) of water was accomplished in less than one hour. Some stannous chloride salts were highly oxidized in the dry state, and only high-purity elemental tin wire gave acceptable yields of tin

  13. Radiation levels and countermeasure research on radiological protection in tin mine in china

    International Nuclear Information System (INIS)

    Yang Fengfang; Yuan Yongling

    2010-01-01

    Objective: To study the distribution of radiation level in our nation's tin mine, therefore comes up with proposals on radiological protection and provide scientific evidence on how to protect lives and health of worker underground in tin mine. Methods: To get the radiation level of the underground workplaces in tin mine by analysis of research papers and the measuring results from on-scene investigations. Results: Majority of the absorbed dose rates of γ radiation in the air of underground workplaces in tin mine falls within the range of radiation levels of normal background. Earlier, the typical values of radon concentration and potential alpha energy concentration of radon daughters in the air of underground workplaces in tin mine are 3.12 kBq/m 3 and 5.61 μJ/m 3 respectively. Now, radon concentration and potential alpha energy concentration of radon daughters in the air of underground workplaces in majority of tin mine are lower than 1000 Bq/m 3 and 3.57 μJ/m 3 . Conclusion: For these tin mine workers with an average of annual effective dose greater than 1 mSv or these of their specific activity for natural uranium in materials are greater than 1 Bq/g need to have regulation of radiological protection. The control limits for the radon concentration and the potential alpha energy concentration of radon daughters and the absorbed dose rates of γ radiation in the air of underground workplaces in tin mine are 1000 Bq/m3, 3.57 μJ/m 3 and 1 μGy/h respectively. The administrative individual dose for workers working under the ground of tin mine is 10 mSv/a. If a worker's total annual effective dose is greater than 10 mSv, he/she should be considered as radioactive worker. (authors)

  14. Sulfates, Clouds and Radiation Brazil (SCAR-B) University of Washington C131A Data

    Data.gov (United States)

    National Aeronautics and Space Administration — SCAR_B_UWC131A data are Smoke/Sulfates, Clouds and Radiation Experiment in Brazil data from instruments on board the University of Washington C131A aircraft in...

  15. Distribution and Bioaccumulation of I-131 Within The Water-Fish System

    International Nuclear Information System (INIS)

    Darussalam, M; Wijaya, DGO; Sutrisno

    1996-01-01

    Distribution and Bioaccumulation of I-131 Within The Water-Fish System. As one of fission products, radioiodine I-131 potentially become a pollutant either resulted froma fallout or radioactive waste. Therefore, special interest has been given to handle I-131 starting from its production implementation and its waste management. The observations in this research have been focussed on distribution and bio accumulation of I-131 within the water-fish systems. Some number of Tilapia fish were put in aquaria containing I-131 contamined water with certain radioactivity concentration. Within time interval of 0, 6, 24, 48 and 72 hours after treatment the radioactivities of water media. fish and their organs have been measured. The results show that the radioactivity percentage different water media containing different I-131 concentration tend to have similar patterns. Meanwhile, the I-131 concentrations of fish and their organs were varied with similar patterns for different I-131 content in water media

  16. A facile way to control phase of tin selenide flakes by chemical vapor deposition

    Science.gov (United States)

    Wang, Zhigang; Pang, Fei

    2018-06-01

    Although two-dimensional (2D) tin selenides are attracting intense attentions, studies on its phase transition are still relatively few. Here we report a facile way to control the phase growth of tin selenide flakes on mica and SiO2/Si by only adjusting nominal Sn:Se ratio, which refers to the amount of loaded SnO2 and Se precursors. High normal Sn:Se ratio induced SnSe flakes, conversely SnSe2 flakes formed. It could be used as a practical guide to selectively synthesize pure phase of single crystalline 2D layered chalcogenide materials similar to tin selenides.

  17. Effect of pulsed voltage on electrochemical migration of tin in electronics

    DEFF Research Database (Denmark)

    Verdingovas, Vadimas; Jellesen, Morten Stendahl; Ambat, Rajan

    2015-01-01

    formation and increases the charge transferred between the electrodes over time. With increase of duty cycle, increases the anodic dissolution of tin, which was visualized using a tin ion indicator applied on the components prior to applying the voltage. The anodic dissolution of tin significantly...... respectively at 10 and 5 V, while the duty cycle and the pulse width were varied in the range of ms. The results showed that varying of pulse width at fixed duty cycle has a minor effect under investigated conditions, whereas increasing duty cycle significantly reduces the time to short due to dendrite...

  18. Recovery Of Valuable Metals In Tin-Based Anodic Slimes By Carbothermic Reaction

    OpenAIRE

    Han Chulwoong; Kim Young-Min; Son Seong Ho; Choi Hanshin; Kim Tae Bum; Kim Yong Hwan

    2015-01-01

    This study investigated the recovery of anodic slimes by carbothermic reaction in the temperature range of 973~1,273K and amount of carbon as a function of time. Tin anodic slime samples were collected from the bottom of the electrolytic cells during the electro-refining of tin. The anodic slimes are consisted of high concentrated tin, silver, copper and lead oxides. The kinetics of reduction were determined by means of the weight-loss measurement technique. In order to understand in detail o...

  19. Separation of substandard tin ores by x-ray fluorescence method

    International Nuclear Information System (INIS)

    Kotler, N.I.; Konovalov, V.M.; Kamenskij, Yu.V.; Neverov, A.D.; Ogorodnikov, Yu.V.

    1987-01-01

    Analysis of pure tin ores on X-ray fluorescence separation (XFS) is carried out. The volumes of lump sampling are substantiated; several variants of technical and economical efficiency of XFS application have been calculated. It is shown that at XFS of -400+25 mm classes conditional as to tin content intermediate product with high efficiency factor may be prepared. Separation of -25+10 mm class is unsuitable, as it doesn't allow to increase tin content to conditional, and the process efficiency is low

  20. Modification of structure and properties of tin – fullerite films irradiated by boron ions

    International Nuclear Information System (INIS)

    Baran, L.V.

    2013-01-01

    By methods of raster electronic, atomic force and electronic force microscopy and X-ray diffraction the research of change of structure, phase composition and local electronic properties of the tin - fullerite films, subjected to implantation by B + ions (E = 80 keV, F = 5×10 17 ions/cm 2 ) are submitted. It is established, that as a result of boron ion implantation of two-layered tin - fullerite films, tin and fullerite interfusion on sues, that is the solid-phase interaction and as a result of which forms the heterophase with heterogeneous local electric properties. (authors)

  1. Synthesis and electrochemical properties of tin oxide-based composite by rheological technique

    International Nuclear Information System (INIS)

    He Zeqiang; Li Xinhai; Xiong Lizhi; Wu Xianming; Xiao Zhuobing; Ma Mingyou

    2005-01-01

    Novel rheological technique was developed to synthesize tin oxide-based composites. The microstructure, morphology, and electrochemical performance of the materials were investigated by X-ray diffraction, scanning electron microscopy and electrochemical methods. The particles of tin oxide-based materials form an inactive matrix. The average size of the particles is about 150 nm. The material delivers a charge capacity of more than 570 mAh g -1 . The capacity loss per cycle is about 0.15% after being cycled 30 times. The good electrochemical performance indicates that this kind of tin oxide-based material is promising anode for lithium-ion battery

  2. The development and current status of 131I treatment for hyperthyroidism

    International Nuclear Information System (INIS)

    Wang Chunmei; Wang Xuemei

    2010-01-01

    Hyperthyroidism is an autoimmune diseasein which excessive amounts of thyroid hormones circulate in the blood. The treatments for hyperthyroidism mainly include antithyroid drugs, 131 I treatment, and surgery. 131 I had been verified as an effective, safe, simple method to treat adult and children hyperthyroidism. Current research trends of 131 I treatment mainly are problems of 131 I treatment of hyperthyroidism and its long-term security. (authors)

  3. Comparison of thallium-201, Tc-99m MIBI and I-131 scan in the follow-up assessment after I-131 ablative therapy in differentiated thyroid cancer

    International Nuclear Information System (INIS)

    Kwon, Jae Sung; Lee, Sung Keun; Kim, Doe Min; Park, Sae Jong; Jang, Kyong Sun; Kim, Eun Sil; Kim, Chong Soon

    1999-01-01

    We conducted a comparative study to evaluate the diagnostic values of Tl-201, Tc-99m MIBI and I-131 scans in the follow-up assessment after ablative I-131 therapy in differentiated thyroid cancer. The study population consisted of 20 patients who underwent surgical removal of thyroid cancer and ablative radioactive iodine therapy, and followed by one or more times of I-131 retreatment (33 cases). In all patients, Tl-201, Tc-99m MIBI, diagnostic and therapeutic I-131 scans were performed and the results were analyzed retrospectively. Also serum thyroglobulin levels were measured in all patients. The final diagnosis of recurrent or metastatic thyroid cancer was determined by clinical, biochemical, radiologic and/or biopsy findings. Positive rates (PR) of Tc-99m MIBI, Tl-201, diagnostic and therapeutic I-131 scans in detecting malignant thyroid tissue lesions were 70% (19/27), 54% (15/28), 35% (17/48) and 63% (30/48), respectively. The PR in the group of 20 cases (28 lesions) who underwent concomitant Tl-201 and I-131 scans were in the order of therapeutic 131 scan 71%, Tl-201 scan 54% and diagnostic I-131 scan 36%. There was no statistically significant difference between Tl-201 and diagnostic I-131 scans (p>0.05). In the group of 20 cases (27 lesions) who underwent concomitant Tc-99m MIBI and I-131 scans, the PR were in the order of Tc-99m MIBI scan 70%, I-131 therapeutic scan 52% and I-131 diagnostic scan 33%. The PR of Tc-99m MIBI was significantly higher than that of diagnostic I-131 scan (p<0.05). Tc-99m MIBI scan is superior to diagnostic I-131 scan in detecting recurrent or metastatic thyroid cancer following ablation therapy in patients with differentiated thyroid cancer. Tl-201 scan did not showed significantly higher positive rate than diagnostic I-131 scan. Instead of diagnostic I-131 scan before the I-131 retreatment, Tc-99m MIBI scan without discontinuing thyroid hormone replacement would be a prudent and effective approach in the management of these

  4. Indium--tin oxide films radio frequency sputtered from specially formulated high density indium--tin oxide targets

    International Nuclear Information System (INIS)

    Kulkarni, S.; Bayard, M.

    1991-01-01

    High density ITO (indium--tin oxide) targets doped with Al 2 O 3 and SiO 2 manufactured in the Tektronix Ceramics Division have been used to rf sputter ITO films of various thicknesses on borosilicate glass substrates. Sputtering in an oxygen--argon gas mixture and annealing in forming gas, resulted in ITO films exhibiting 90% transmission at 550 nm and a sheet resistance of 15 Ω/sq for a thickness of 1100 A. Sputtering in an oxygen--argon gas mixture and annealing in air increased sheet resistance without a large effect on the transmission. Films sputtered in argon gas alone were transparent in the visible and the sheet resistance was found to be 100--180 Ω/sq for the same thickness, without annealing

  5. Synthesis and shape control of copper tin sulphide nanocrystals and formation of gold-copper tin sulphide hybrid nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Kruszynska, Marta; Parisi, Juergen; Kolny-Olesiak, Joanna [Oldenburg Univ. (Germany). Inst. of Physics, Energy and Semiconductor Research Lab.

    2014-08-15

    Hexagonal prismatic Cu{sub 3}SnS{sub 4} nanoparticles and nanorods were synthesized by a hot-injection procedure. Changing the reaction conditions leads to the formation of different shapes. When oleylamine is used as a solvent, hexagonal prismatic particles are obtained, while a reaction in octadecene results in the formation of nanorods. The growth process of copper tin sulphide starts with the formation of djurleite copper sulphide seeds. Their reaction with Sn{sup 4+} ions leads to the formation of Cu{sub 3}SnS{sub 4}. These Cu{sub 3}SnS{sub 4} nanocrystals form Au-Cu{sub 3}SnS{sub 4} hybrid nanostructures by reaction with gold seeds.

  6. Self-assembly of tin wires via phase transformation of heteroepitaxial germanium-tin on germanium substrate

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei; Li, Lingzi; Yeo, Yee-Chia, E-mail: yeo@ieee.org [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Tok, Eng Soon [Department of Physics, National University of Singapore, Singapore 117551 (Singapore)

    2015-06-14

    This work demonstrates and describes for the first time an unusual strain-relaxation mechanism by the formation and self-assembly of well-ordered tin wires during the thermal annealing of epitaxial Ge{sub 0.83}Sn{sub 0.17}-on-Ge(001) substrate. Fully strained germanium-tin alloys (Ge{sub 0.83}Sn{sub 0.17}) were epitaxially grown on Ge(001) substrate by molecular beam epitaxy. The morphological and compositional evolution of Ge{sub 0.83}Sn{sub 0.17} during thermal annealing is studied by atomic force microscopy, X-ray diffraction, transmission electron microscopy. Under certain annealing conditions, the Ge{sub 0.83}Sn{sub 0.17} layer decomposes into two stable phases, and well-defined Sn wires that are preferentially oriented along two orthogonal 〈100〉 azimuths are formed. The formation of the Sn wires is related to the annealing temperature and the Ge{sub 0.83}Sn{sub 0.17} thickness, and can be explained by the nucleation of a grain with Sn islands on the outer front, followed by grain boundary migration. The Sn wire formation process is found to be thermally activated, and an activation enthalpy (E{sub c}) of 0.41 eV is extracted. This thermally activated phase transformation, i.e., 2D epitaxial layer to 3D wires, occurs via a mechanism akin to “cellular precipitation.” This synthesis route of Sn wires opens new possibilities for creation of nanoscale patterns at high-throughput without the need for lithography.

  7. The clinical significance of measuring the thyroid 131I uptake rate to identify the type of premature hypothyroidism for hyperthyroid after 131I treatment

    International Nuclear Information System (INIS)

    Deng Bo; Chen Huaming; Zhu Tianfeng

    2001-01-01

    The 3 h thyroid 131 I uptake rate and the content of serum TT 3 , TT 4 , TSH are measured in 63 patients of premature hypothyroidism (consisting of 33 provisional hypothyroids and 30 perpetual hypothyroidism) before and after thyroxine substitutes treatment for six moths. The results show that there is obvious difference in 131 I uptake rate compared provisional hypothyroidism with perpetual hypothyroidism, and no difference in the content of serum TT 3 , TT 4 , TSH before the treatment. Compared with normal conditions, there is no difference in 131 I uptake rate of provisional hypothyroidism, but the 131 I uptake rate of perpetual hypothyroidism has obvious decrease before and after the treatment. Therefore the type of patients who suffer from premature hypothyroidism can be distinguished according to the 131 I uptake rate: if the 3 h thyroid 131 I uptake rate is normal, it is provisional hypothyroidism; if not, it is perpetual hypothyroidism

  8. Vocal cord paralysis following I-131 ablation of a postthyroidectomy remnant

    International Nuclear Information System (INIS)

    Lee, T.C.; Harbert, J.C.; Dejter, S.W.; Mariner, D.R.; VanDam, J.

    1985-01-01

    Vocal cord paralysis has been reported following I-131 therapy of thyrotoxicosis and following ablation of the whole thryoid. However, this rare complication has not previously been described following I-131 ablation of a postthyroidectomy remnant. The authors report a patient who required tracheostomy for bilateral vocal cord paralysis following I-131 ablation after near-total thyroidectomy for papillary thyroid carcinoma

  9. 40 CFR 131.8 - Requirements for Indian Tribes to administer a water quality standards program.

    Science.gov (United States)

    2010-07-01

    ... administer a water quality standards program. 131.8 Section 131.8 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.8 Requirements for Indian Tribes to administer a water quality standards program. (a) The Regional Administrator, as...

  10. 47 CFR 25.131 - Filing requirements for receive-only earth stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Filing requirements for receive-only earth stations. 25.131 Section 25.131 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses Earth Stations § 25.131 Filing...

  11. 20 CFR 220.131 - Work which exists in the national economy.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Work which exists in the national economy. 220.131 Section 220.131 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT DETERMINING DISABILITY Vocational Considerations § 220.131 Work which exists in the national economy. (a) General. The Board considers...

  12. 30 CFR 250.131 - Will MMS notify me before conducting an inspection?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Will MMS notify me before conducting an inspection? 250.131 Section 250.131 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR... § 250.131 Will MMS notify me before conducting an inspection? MMS conducts both scheduled and...

  13. 13 CFR 120.131 - Leasing part of new construction or existing building to another business.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Leasing part of new construction or existing building to another business. 120.131 Section 120.131 Business Credit and Assistance... § 120.131 Leasing part of new construction or existing building to another business. (a) If the SBA...

  14. Differentiated thyroid cancer following radioiodide 131I therapy of hyperthyroidism: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, J; Soumar, J; Zeman, V; Nahodil, V; Zamrazil, V; Smejkal, V Jr

    1978-01-01

    Differentiated (papillary) thyroid cancer was detected 17 years following radioiodide 131I treatment for toxic multinodular goiter. Twenty-one cases of thyroid cancers with previous 131I therapy for hyperthyroidism were summarized. This combination is rare compared to the incidence of thyroid cancers following external irradiation. This may be due to higher absorbed dose to thyroid in 131I treatment.

  15. 26 CFR 1.381(c)(13)-1 - Involuntary conversions.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Involuntary conversions. 1.381(c)(13)-1 Section 1.381(c)(13)-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.381(c)(13)-1 Involuntary conversions...

  16. Hypothyroidism caused by 131I treatment for Graves disease

    International Nuclear Information System (INIS)

    Deng Shouzhen; Lin Xiangtong; He Wanting; Zhang Kaili; Zhang Jinming; Kuai Dayu

    1991-01-01

    The refollow-up has been carried out in hypothyroidism caused by 131 I treatment for Graves disease. The serum HS-TSH(IRMA), FT3, TSH(RIA), TT3, TT4, FT4I, MCA, TGA, Cholesterol and Triglyceride has been measured in 26 patient after 131 I treatment for 9.5 years in average. At the same time TRH stimulation test was also performed, and the clinical symptoms and signs assessed. The results showed that TSH is the most sensitive criterion for hypothyroidism, followed by Cholesterol and FT 4 I. The occurence of hypothyroidism may be related to the presence of thyroid antibody as demonstrated by the elevation of serum MCA, TGA. Therefore measurement of serum TSH, FT 4 I and Cholesterol during long term follow-up is beneficial for early diagnosis of hypothyroidism and evaluating the effect of substitution treatment

  17. Hypothyroidism in patients after thyroid elimination by 131I

    International Nuclear Information System (INIS)

    Vana, S.; Nemec, J.; Reisenauer, R.

    1979-01-01

    Patients after elimination of the thyroid gland with radioiodine 131 I develop hypothyroidism only slowly, the peripheral parameters lagging behind the protein bound iodine especially till the fiftieth day after elimination. In young patients the Achilles tendon reflex and the preejection period lag behind symmetrically, in older patients the effect of the supply of thyroid hormones to the skeletal muscles disappear faster, whereas the heart retains the reserves of the thyroid hormones or systems dependent on thyroid hormones affecting the rapidity of myocardial contraction for a relatively longer period of time. Thus, in older patients after elimination of the thyroid gland with radioiodine 131 I the Achilles tendon reflex is a better criterion of hypothyroidism than the preejection period of heart contraction. (author)

  18. Microwave assistance of labeling hippuric acid by I-131

    International Nuclear Information System (INIS)

    Sherlock Huang, Lin-Chiang; Wu, Kou-Hung; Ko, Pi-Wen; Hsieh, Cheng-Ying; Pao, Kuan-Chuan; Chou, Shih-Ching; Shieh, Fa-Kuen; Sureshbabu, Radhakrishnan; Hsu, Ming-Hua

    2014-01-01

    This work presents a novel approach for labeling hippuric acid with I-131 using microwaves. It utilizes copper(II) acetate as a catalyst of the labeling. The process involves the use of this catalytic copper(II) acetate at low dilutions that were nevertheless sufficient to produce labeled hippuric acid with high radiochemical purity in a short time. Therefore, the novel technique overcomes the limitations of previously reported conventional methods that involve heating. - Highlights: • We report the microwave assisted radiochemical labeling of hippuric acid by I-131. • Cu(OAc) 2 can be used as catalyst to get labeled product in lower dilution condition. • Advantages of our method are lesser time scale and high radiochemical purity.

  19. Iodine-131 releases from the Hanford Site, 1944--1947

    International Nuclear Information System (INIS)

    Heeb, C.M.

    1992-10-01

    Detailed results of the Hanford Environmental Dose Reconstruction (HEDR) iodine-131 release reconstruction are presented in this volume. Included are daily data on B, D, and F Plant, reactor operations from the P-Department Daily Reports (General Electric Company 1947). Tables of B and T Plant material processed from the three principal sources on separations plant operations: The Jaech report (Jaech undated), the 200 Area Report (Acken and Bird 1945; Bird and Donihee 1945), and the Metal History Reports (General Electric Company 1946). A transcription of the Jaech report is also provided because it is computer-generated and is not readily readable in its original format. The iodine-131 release data are from the STRM model. Cut-by-cut release estimates are provided, along with daily, monthly, and yearly summations. These summations are based on the hourly release estimates. The hourly data are contained in a 28 megabyte electronic file. Interested individuals may request a copy

  20. Improved monitoring procedure for Iodine -131 in radiochemical process laboratory

    International Nuclear Information System (INIS)

    Singh, Pratap; Yadav, R.K.B.; Anilkumar, S.; Gopalakrishnan, R.K.; Chakraborty, S.

    2016-01-01

    Radiation Hazard Control Unit at Isotope wing provides radiological safety support and advises for safe processing and production of radiopharmaceuticals. Tellurium Oxide (TeO 2 ), irradiated in a nuclear reactor, is processed in a process laboratory for separating 131 I using dry distillation technique. The workplace environment is being assessed for airborne radioactivity using installed Static Air Samplers (SASs). SASs contains two filter media (glass fibre and charcoal impregnated paper) to collect airborne 131 I radioactivity and laboratory air sampled at 50 litres per minutes (lpm). Personal Air Sampler (PAS) consists of three types of filters viz. a glass fibre, charcoal impregnated paper and cartridges containing activated charcoal granules. Three combinations were studied at a sampling rate of 5 lpm

  1. 131I release from a HTGR during the LOFC accident

    International Nuclear Information System (INIS)

    Foley, J.E.

    1975-03-01

    The time-dependent release of 131 I from both the core and the containment building of a high temperature gas-cooled (HTGR) reactor during the loss of forced coolant (LOFC) accident is studied. A simplified core release model is combined with a containment building release model so that the total amount of the isotope released to the environment can be calculated. The time-dependent release of 131 I from the core during the LOFC accident is primarily a function of the time-dependent core temperatures and the failed fuel release constants. The most important factor in calculating the amount of the isotope released to the environment is the total amount released into the containment building. (U.S.)

  2. 131I metabolism in the study of antithyroid drug

    International Nuclear Information System (INIS)

    Gagliardi, R.P.; Santalla de Pirovano, M. del C.; Kramar de Valmaggia, E.P.; Valsecchi, R.; Pisarev, Mario; Altschuler, Noe

    1977-11-01

    The main purpose of the present report was to study the action of antithyroid drugs on different parameters of thyroid activity utilizing 131 I, in the offsprings of rats treated during pregnancy and the perinatal period. Both PTU and MMI caused alterations in growth and thyroid activity, but they were more dramatic with the former. A significative increase in 131 I thyroid uptake and in circulating radioactivity was observed. When % uptake was expressed as a function of thyroidal and body weights, a significative decrease was noticed. The ratio T/S and the percentage of labelled iodothyronines in pancreatin digests were also decreased. Neuromuscular maturation was evaluated, by means of the test of Schapiro. A group of animals treated with PTU plus T 4 had a significant delay, reaching normal developement later than the controls or those treated with MMI. (author) [es

  3. I-131 metaiodobenzylguanidine: diagnostic use in neuroblastoma patients in relapse

    International Nuclear Information System (INIS)

    Heyman, S.; Evans, A.E.; D'Angio, G.J.

    1988-01-01

    Metaiodobenzylguanidine (MIBG) has been used for the detection and treatment of neuroectodermal tumors, including neuroblastoma. We report our experience with 131 I-MIBG used diagnostically in neuroblastoma patients with relapse. Thirty-eight studies were performed in 26 patients. There were 24 children (range 3 months-14 years) and two adults. While the study was found to be both sensitive and specific for the presence of disease, there are instances of discordance. False-negative studies were found with a markedly anaplastic tumor and with two mature ganglioneuromas. A bone lesion was negative with 131 I-MIBG, but positive on bone scan. A biopsy confirmed the presence of neuroblastoma. Caution should be exercised when scanning pretreated patients, and perhaps with newly diagnosed patients as well

  4. Cancer of the thyroid and 131I fallout in Norway

    International Nuclear Information System (INIS)

    Oftedal, P.; Lund, E.

    1983-01-01

    From 1953 to 1962 Norway received relatively high levels of radioactive fallout. On the basis of extensive measurements in air, precipitation, food and humans, the dose to the thyroid due to 131 I has been calculated. Cancer registration in Norway is practically completely efficient because of obligatory notification of the Cancer Registry by physicians, pathology laboratories, and the Central Bureau of Statistics of all cases or death certificates concerning cancer. Analysis of the Cancer Registry data from 1953 to 1980 concerning birth cohorts 1936 to 1961 indicates an overall increasing trend in thyroid cancer morbidity, most pronounced in female cohorts born 1930-50. The highest, most abrupt irregularities reveal a coincidence of high numbers with high 131 I content in milk consumed during the years of prepuberty and puberty. Possible interpretations are discussed. (author)

  5. Radionuclide therapy of Sipple syndrome using iodine-131 metaiodobenzylguanidine

    International Nuclear Information System (INIS)

    Furusawa, Mitsuhiro; Shimomura, Osamu; Tomiguchi, Seiji; Hirota, Yoshihisa; Takahashi, Mutsumasa; Yamauchi, Jyoji; Iwaoka, Daisuke; Satoh, Tatsuo

    1992-01-01

    A 40-years-old female who had lung and liver metastases from malignant pheochromocytoma was treated with 3.7 GBq 131 I-MIBG (metaiodobenzylguanidine). After the treatment, 131 I-MIBG showed increased uptake in the metastatic lesions of the lung and liver. The size of tumor was no significant change on CT and MRI, but the intensity of liver metastases decreased gradually on MRI. Prior to the treatment, the levels of adrenaline and noradrenaline were high. One to three days after treatment, the level of these laboratory data further increased, but they gradually decreased in 1 to 3 months. These changes may be due to necrosis of tumor tissue. (author)

  6. Present state of the I-131-MIBG therapy

    International Nuclear Information System (INIS)

    Fischer, M.

    1986-01-01

    Treatment of malignant pheochromocytoma and neuroblastoma stage III and IV is unsatisfactory. Locally invasive tumors may be cured by radical extirpation. The role of irradiation and/or chemotherapy in malignant pheochromocytoma is disappointing, in neuroblastoma in many cases debatable. From 1981 to the present we studied more than 250 patients by MIBG scintigraphy. 5 patients with malignant pheochromocytoma, one female patient with an intra-adrenal, probably benign pheochromocytoma and 3 children with neuroblastoma stage IV were treated with I-131-MIBG

  7. Preparation of Labelled I131 Rose-Bengal

    International Nuclear Information System (INIS)

    Mayani, Mbutyabo; Chabouri, Galaal.

    1978-01-01

    Rose bengal purified on a Sephadex G-25 column has been labelled with iodine-131. The exchange reaction has been undertaken in an ether - alcohol medium. The influence of different factors (iodine concentration, Psup(h), purity and chemical form of the substratum, reaction rate) on the labelling yield has been studied. Radiochemical yield of 90% have been obtained in some conditions instead of the normal 80% reported in the literature

  8. Iodine 131 therapy patients: radiation dose to staff

    International Nuclear Information System (INIS)

    Castronovo, F.P. Jr.; Beh, R.A.; Veilleux, N.M.

    1986-01-01

    Metastasis to the skeletal system from follicular thyroid carcinoma may be treated with an oral dose of 131 I-NaI. Radiation exposures to hospital personnel attending these patients were calculated as a function of administered dose, distance from the patient and time after administration. Routine or emergency patient handling tasks would not exceed occupational radiation protection guidelines for up to 30 min immediately after administration. The emergency handling of several patients presents the potential for exceeding these guidelines. (author)

  9. Quadrupole moment of the superdeformed band in 131Ce

    International Nuclear Information System (INIS)

    He, Y.; Godfrey, M.J.; Jenkins, I.; Kirwan, A.J.; Nolan, P.J.

    1990-01-01

    A mean lifetime measurement has been carried out on the states in the superdeformed band found in 131 Ce using the Doppler shift attenuation method (DSAM). The measured intrinsic nuclear quadrupole moment is Q o approx= 6 eb, assuming constant deformation, which corresponds to a quadrupole deformation β 2 approx= 0.35. This is considerably smaller than the value deduced for 132 Ce. (author)

  10. Hypertension complicating 131I-meta-iodobenzylguanidine therapy for neuroblastoma

    International Nuclear Information System (INIS)

    Kosmin, Michael A.; Cork, Nicholas J.; Gaze, Mark N.; Bomanji, Jamshed B.; Shankar, Ananth

    2012-01-01

    Radiolabelled meta-iodobenzylguanidine (mIBG), used as targeted therapy for neuroblastoma, is known to have effects on blood pressure (BP). In this study we audited BP changes in patients receiving 131 I-mIBG therapy for neuroblastoma to identify BP-related adverse events (AE) and possible predictive factors. Between 2003 and 2010, 50 patients with neuroblastoma received 110 131 I-mIBG administrations. BP measurements before and after administration were compared with age- and sex-matched centile values. AE were analysed, and possible predisposing factors identified. This population had a baseline BP distribution higher than that of their age- and sex-matched peers, with 16% of preadministration systolic BP values above the 95th centile. Changes in BP after administration showed an approximately normal distribution with similar numbers of reduced and increased values. Four AE, all related to hypertension, occurred with one patient having generalized seizures. One AE was immediate, others occurred between 20 and 25 h after administration. No significant association between AE and patient age or sex was demonstrated. However, a significant association between AE and high preadministration BP was shown, both above the 90th centile (p = 0.0022) and above the 95th centile (p = 0.0135). Clinically relevant hypertension following 131 I-mIBG therapy affected less than 5% of administrations, but was more common in those patients with preexisting hypertension. As hypertensive episodes may occur many hours after treatment, close monitoring of BP needs to be continued for at least 48 h after administration of 131 I-mIBG. (orig.)

  11. 131I albumin of patients carrying progressive systemic sclerosis study

    International Nuclear Information System (INIS)

    Cossermelli, W.; Carvalho, N.; Papaleo Netto, M.

    1974-01-01

    131 I albumin metabolic changes were studied in 14 female patients with progressive systemic sclerosis. A statistical study of the gathered data disclosed increased distribution and turnover half-life and diminished turnover rate of radioactive substance. Since T/2 of turnover and turnover rate are the result produced by the albumin synthesis and degradation, they are probably lowered during active disease causing hypoalbuminemia. The aminoacids also are probably absorbed by other protein like the gammaglobuline synthesis [pt

  12. 131I-19-iodocholesterol scintigraphy and suprarenal pathology

    International Nuclear Information System (INIS)

    Leger, F.A.; Baulieu, J.L.; Plouin, P.F.

    The methods used and results obtained by 131 I-19-iodocholesterol scintigraphy (dose 2mCi) are given for 24 patients with various kinds of suprarenal hyperactivity (primary hyperaldosteronism, Cushing's syndrome, malignant adrenocortical tumour, pheochromocytoma). The morphological and quantitative aspects of suprarenal scintigraphy are examined. A technique to determine the iodocholesterol uptake ratio of the two adrenal glands, considered more important than the fixation rate of each is described [fr

  13. Treatment of Graves' disease with I131: Case Report

    International Nuclear Information System (INIS)

    Sanchez Povis, J.E.; Sandoval Okuma, J.C.; Contreras Carreno, S.E.; Cabello Morales, E.

    2006-01-01

    Objective: To describe the response and complications in children and teenagers suffering Graves' disease who received radioactive iodine therapy. Material and Methods: The clinical records of the patients attended at Paediatric Endocrinology Unit of Hospital Nacional Cayetano Heredia who received therapy with I 131 were reviewed. Demographic characteristics, thyroid weight, radioactive iodine uptake, I 131 dose and clinical and thyroid function evolution were registered. Results: We include thirteen patients: 1 male and 12 females. The mean thyroid weight obtained was 47.56 ± 10.70 gr. Initial calculated dose was 3.92 ± 0.95 mCi, with a total dose of 4.47 ± 1.66 mCi, and mean following period of 2.76 years. Ten patients received only one dose, 2 patients received two doses and one patient received three doses; all cases remitted. Patients who received only 1 dose showed disease remission at 13.13 weeks and mean remission period of the population was 24.62 weeks. Hypothyroidism prevalence up to six months from initiating treatment was 66.66%, and up to 257 weeks 83.33%. Conclusions: We conclude that I 131 was 100% effective in the treatment of children and adolescents suffering Graves' disease in this small series. (author)

  14. Efficacy of different I-131 doses for thyroid remnant ablation

    International Nuclear Information System (INIS)

    Nguyen, X.C.; Thiep, T.V.; Hung, N.C.

    2007-01-01

    Full text: Radioactive iodine 131 I has been widely used as a treatment modality of differentiated thyroid carcinoma. The need for high dose radioiodine ablation of thyroid remnant is still in question. The aim of this prospective study was to assess the efficacy of 131 I different single and fractionated doses in ablation of post-operative thyroid remnant. Patients and methods: One hundred-twelve patients were included in this study. Sixty-one patients with TSH≥30 μU/ml were treated 30 mCi in group 1 (36 patients) or 100 mCi in group 2 (25 patients). Fifty one patients with TSH 131 I high dose of 100 mCi and no severe adverse effect in the other groups. Conclusion: Single high dose (100 mCi) may be more efficient than single low dose (30 mCi) for post-operative remnant ablation with serum TSH≥30 μU/ml and the efficacy of low fractionated doses (30+30 mCi) was comparable with high-fractionated dose (30+100 mCi) for post-operative remnant ablation with low serum TSH in differentiated thyroid carcinoma. (author)

  15. Radiation doses by therapeutical practices with iodine 131

    International Nuclear Information System (INIS)

    Di Trano, J.L.; Rojo, A.M.; Gomez Parada, I.M.; Grassi, E.; Gatica, N.; Kunst, J.J.; Gonzalez, M.

    1998-01-01

    The aim of this document is to estimate the doses to workers and public due to therapeutical practices with iodine 131. Environmental and personal doses by external irradiation were determined using thermoluminescent dosimeters (TLD). The environmental dosimetry resulted in an equivalent dose H * (10) of approximately 0,1 mSv. The calculated personal equivalent dose Hp (10) was of the order of 0,1 mSv. The exposition rate was measured, being the values obtained in the range of 0,20 and 0,35 mSv/h. (1m from the abdominal wall). Concentrations of iodine 131 were determinate in the air of the room, during the first day in the hospital. Values obtained were between 0,04 Bq/l and 0,20 Bq/l. Surface samples were taken in the service, obtaining levels of contamination in the range of 0,001 and 0,4 Bq/cm 2 . The surface samples obtained in the hospital room were about 0,15 Bq/cm 2 . Urine samples were collected resulting in an eliminated activity of iodine 131, during the first 24 hours, of about 60 % of the administered activity. Samples of sweat of different cutaneous regions were obtained, the maximum values of the activity measured reached 200 Bq/cm 2 . According to the obtained results it is important to elaborate guides to be given to patients as an instrument to reduce the external exposure and to avoid internal contamination. (author)

  16. Iodine-131 therapy for the treatment of hyperthyroidism

    International Nuclear Information System (INIS)

    Enkhtuya, B.; Tsevelmaa, L.; Erdenechimeg, S.

    2005-01-01

    Full text: Since 1997, radioactive iodine (I-131) has become the most widely used therapy for patients with hyperthyroidism cased by Graves' disease in the Mongolia. Our seven years clinical experience was reviewed to evaluate the efficacy of the therapy. We treated 150 patients (119 female and 31 male) with hyperthyroidism with I-131 (mean dose 8.2 mCi) between 1997 and 2004. The dose calculation was based on 24 hours thyroid uptake, thyroid gland size and degree of toxicity. We determined their thyroid status after 1 year in relation to age, pretreatment with an antithyroid drug, pretreatment thyroid size and whether or not there are thyroid nodules. Out of the 150 patients, 87(58%) were euthyroid, 30 (20%) hypothyroid at 1 year after treatment, and 33 patients (22%) had persistent hyperthyroidism and required second treatment. The patients who had persistent hyperthyroidism were younger in age, had larger thyroid glands, some of them had thyroid nodules and 27 patients (81%) pretreatment with anti-thyroid drugs for more than 6 months. Our results showed that the majority of patients with Graves' hyperthyroidism had a effective treatment. However, 22% of patients with younger age, larger thyroid glands, patients with thyroid nodules and who had anti-thyroid drugs for more than 6 months had undergone repeated treatment. A higher dose of I-131 maybe advisable in such patients. In order to establish correct treatment dose we may need more precise dosimetry study. (author)

  17. 131I-m IBG preparation and clinical applications

    International Nuclear Information System (INIS)

    Yassine, T.; Bakeir, M. A.; Al-Shnan, S.; Al-Asad, M.

    2001-12-01

    The factors affecting the preparation of 131 I-mIBG were studied and the optimal labelling and preparation conditions were determined in a manner that the requirements of GRP and GMP are satisfied. The m-IBG was labeled by isotopic exchange method where in situ produced Cu (II) was used as a catalyst. The Cu (II) was in situ produced by the effect of thiosulfate on Cu(II) ions in the presence of acetic acid. The optimal conditions were determined as: (The ratio of acetic acid to the iodide-131 solution is 0.5-1.5, the reaction temperature is (160 Centigrade), the reaction period is 60 minutes, and the quantity of m-IBG must be more than 1mg). At these conditions, high labelling yield of 98% was obtained. Further purification lead to an increase in the RCP to more than 99%. All preparations produced sterile and Pyrogen free solutions. The biodistribution studies in rats showed random distribution, which were slightly higher than that were shown in literature. These differences were attributed to the absence of stable iodine saturation of the rats prior to the injection of 131 I-mIBG in this study. Clinical studies using our products showed high localization in the tumors in case of neuroblastoma patients and in adrenal gland in case of pheochromocytoma patients. (author)

  18. Micronucleus induction as a measure of I-131 exposure

    Energy Technology Data Exchange (ETDEWEB)

    Kasuba, V; Horvat, D [Inst. for Medical Recearch and Occupational Health, Zagreb (Croatia). Laboratory for Mutagenesis; Kusic, Z [Clinical Hospital Sestre Milosrdnice, Zagreb (Croatia). Dept. of Oncology and Nuclear Medicine; Vlatkovic, M [Clinical Hospital Centre, Zagreb (Croatia). Dept. of Nuclear Medicine and Radiation Protection

    1994-10-01

    The change of cell numbers in the peripheral blood following irradiation has been studied for many years, particularly in patients undergoing radiotherapy. Recently, attention is directed towards the use of cytogenetic-mutagenetic methods to estimate the biological effects of received radiation dose. The aim of our study was to identify the difference in number and distribution of micronucleus, depending of applied therapeutic dose of iodine-131. According to their diagnosis, six patients have received iodine-131 in range from 80 to 140 mCi, while in the other group of patients the dose values varied from 7 to 32 mCi. On in vitro peripheral blood lymphocyte cultures micronucleus test was applied. Micronucleus analyses were carried out before the treatment, 24, 48 and 96 hours after the oral application of radiopharmaceutical. The number of micronucleus is showing increase, depending on applied radioactivity of iodine-131 and duration of exposition. The clear dose response relationship was never found. These results illustrate the problem associated with the inhomogeneous distribution of dose which results from the concentration of incorporated radionuclide into thyroid or other tissues. (author).

  19. Cancer risk after iodine-131 therapy for hyperthyroidism

    International Nuclear Information System (INIS)

    Holm, L.E.; Hall, P.; Wiklund, K.; Lundell, G.; Berg, G.; Bjelkengren, G.; Cederquist, E.; Ericsson, U.B.; Hallquist, A.; Larsson, L.G.

    1991-01-01

    Cancer incidence was studied in 10,552 patients (mean age, 57 years) who received 131I therapy (mean dose, 506 MBq) for hyperthyroidism between 1950 and 1975. Follow-up on these patients was continued for an average of 15 years. Record linkage with the Swedish Cancer Register for the period 1958-1985 identified 1543 cancers occurring 1 year or more after 131I treatment, and the standardized incidence ratio (SIR) was 1.06 (95% confidence interval = 1.01-1.11). Significantly increased SIRs were observed for cancers of the lung (SIR = 1.32; n = 105) and kidney (SIR = 1.39; n = 66). Among 10-year survivors, significantly elevated risks were seen for cancers of the stomach (SIR = 1.33; n = 58), kidney (SIR = 1.51; n = 37), and brain (SIR = 1.63; n = 30). Only the risk for stomach cancer, however, increased over time (P less than .05) and with increasing activity administered (P = not significant). The risk for malignant lymphoma was significantly below expectation (SIR = 0.53; n = 11). Overall cancer risk did not increase with administered 131I dose or with time since exposure. The absence of any increase in leukemia adds further support to the view that a radiation dose delivered gradually over time is less carcinogenic than the same total dose received over a short time. Only for stomach cancer was a possible radiogenic excess suggested

  20. Radiation safety considerations for post-iodine-131 hyperthyroid therapy

    International Nuclear Information System (INIS)

    Culver, C.M.; Dworkin, H.J.

    1991-01-01

    The purpose of this study was to develop guidelines based on patient measurements as to when iodine-131- (131I) treated hyperthyroid patients may resume close personal contact. External exposure rates were measured on 59 patients using an ionization survey meter in the upright position. The initial measurement was recorded within 20 min post-dose administration at one meter. Exposure rates were measured 2-11 days post-dose administration at 1, 0.6, and 0.3 meters from the patient's thyroid. In the administered dose range of 3 to less than 12 mCi of 131I, all 40 patients measured less than or equal to 2.0 mR/hr at one meter on Day 0, and 25 patients (25/29) were less than or equal to 2.0 mR/hr at 0.6 meter on Days 2-4. Guidelines can be prepared based on the administered dose that are rational and in conformity with existing radiologic health standards

  1. Study of thyroid function, using iodine 131, in leprosy patients

    International Nuclear Information System (INIS)

    Tatit, E.D.; Carvalho, N.

    1973-01-01

    A study was made in a group of 117 leprosy patients in differents clinical conditions, under treatment, in drug rest or virgins of treatment. They were divided in sub-groups for the following tests: the radioiodine uptake of 2-24 hours; neck-thigh ratio; thyrobinding index; protein-bound radioiodine (PB 131 I) levels of plasma. The results led to the following conclusions: 1) Leprosy patients present a low uptake in conjunction with a decrease in the velocity of thyroid clearance in the majority of the cases. Even the remaining presented values within the low limit of normality; 2) In view of these results, the tests were repeated after thyroid stimulating hormone (TSH) with exogenous TSH, in the sub-group of patients virgin of treatment. With the positive response observed (increase in the uptake, in the neck-thigh ratio and the PB 131 I) the low uptake was considered secondary with regard to a deficit of the endogenous TSH; 3) The TBI and PB 131 I tests were not in sufficient agreement for an appraisal of the phase of organic binding and release of hormone [pt

  2. Epidemiology and Characteristics of Escherichia coli Sequence Type 131 (ST131) from Long-Term Care Facility Residents Colonized Intestinally with Fluoroquinolone-Resistant Escherichia coli

    Science.gov (United States)

    Han, Jennifer H.; Garrigan, Charles; Johnston, Brian; Nachamkin, Irving; Clabots, Connie; Bilker, Warren B.; Santana, Evelyn; Tolomeo, Pam; Maslow, Joel; Myers, Janice; Carson, Lesley; Lautenbach, Ebbing; Johnson, James R.

    2016-01-01

    The objective of this study was to evaluate molecular and epidemiologic factors associated with Escherichia coli sequence type 131 (ST131) among long-term care facility (LTCF) residents who acquired gastrointestinal tract colonization with fluoroquinolone-resistant E. coli (FQREC). Colonizing isolates from 37 residents who newly developed FQREC colonization at three LTCFs from 2006–2008 were evaluated. Twenty-nine (78%) of 37 total FQREC colonizing isolates were ST131. Most ST131 isolates had a distinctive combination of gyrA and parC replacement mutations. The ST131 and non-ST131 isolates differed significantly for the prevalence of many individual virulence factors but not for the proportion that qualified molecularly as extraintestinal pathogenic E. coli (ExPEC) or aggregate virulence factor scores. E. coli ST131 was highly prevalent among LTCF residents with FQREC colonization. Future studies should determine the risk factors for infection among ST131-colonized residents, and assess the potential for increased transmissibility of ST131 in the long-term care setting. PMID:27939288

  3. Surface characterization of sol–gel derived indium tin oxide films on ...

    Indian Academy of Sciences (India)

    Unknown

    , India ... 1. Introduction. Indium tin oxide (ITO) coating on glass is an important item in the field ..... In addition, contamination of carbon from environment cannot be ruled ..... processing of ceramics, glasses and composites (eds) L L. Hench and ...

  4. THE INFLUENCE OF NANOSECOND ELECTROMAGNETIC PULSES TO OBTAIN TIN AND THE PROPERTIES OF ITS ALLOYS

    Directory of Open Access Journals (Sweden)

    V. G. Komkov

    2012-01-01

    Full Text Available Experimentally found that the effect of nanosecond electromagnetic pulses to melt the charge, while the carbon thermal recovery of the tin ore, accelerates the formation of the metallic phase.

  5. Formation of Ti-N graded bioceramic layer by DC hollow-cathode plasma nitriding

    Institute of Scientific and Technical Information of China (English)

    ZHENG Chuan-lin

    2004-01-01

    Ti-N graded ceramic layer was formed on titanium by using DC hollow-cathode plasma nitriding technique. The structure of Ti-N layer was analyzed using X-ray diffractometry(XRD) with Cu Kα radiation, and the microhardness( HV0.1) was measured from the surface to inner along the cross section of Ti-N layer. The results indicate that the Ti-N graded layer is composed of ε-Ti2 N, δ-TiN and α-Ti(N) phases. Mechanism discussion shows that hollow-cathode discharge can intensify gas ionization, increase current density and enhance the nitriding potential, which directly increases the thickness of the diffusion coatings compared with traditional nitriding methods.

  6. Tribological characterization of TiN coatings prepared by magnetron sputtering

    Science.gov (United States)

    Makwana, Nishant S.; Chauhan, Kamlesh V.; Sonera, Akshay L.; Chauhan, Dharmesh B.; Dave, Divyeshkumar P.; Rawal, Sushant K.

    2018-05-01

    Titanium nitride (TiN) coating deposited on aluminium and brass pin substrates using RF reactive magnetron sputtering. The structural properties and surface morphology were characterized by X-ray diffraction (XRD), atomic force microscope (AFM) and field emission scanning electron microscope (FE-SEM). There was formation of (101) Ti2N, (110) TiN2 and (102) TiN0.30 peaks at 3.5Pa, 2Pa and 1.25Pa sputtering pressure respectively. The tribological properties of coating were inspected using pin on disc tribometer equipment. It was observed that TiN coated aluminium and brass pins demonstrated improved wear resistance than uncoated aluminium and brass pins.

  7. Tin (Sn) - An Unlikely Ally to Extend Moore's Law for Silicon CMOS?

    KAUST Repository

    Hussain, Aftab M.

    2012-01-01

    growth in device performance. To overcome this problem, novel channel materials are being developed to enhance carrier mobility and hence increase device performance. This work explores a novel semiconducting alloy - Silicon-tin (SiSn) as a channel

  8. Filtrates & Residues: Experimental Work with Tin (II) Chloride in a High School.

    Science.gov (United States)

    Sanchez, Manuela Martin

    1988-01-01

    Presents a high school chemistry lab experiment using tin (II) chloride to explore the concepts of hydrolysis, Le Chatelier's principle, and electrolysis. Presents methodology and the chemistry involved. Offers questions for the students. (MVL)

  9. Separation of methyltin species from inorganic tin, and their interactions with humates in natural waters

    International Nuclear Information System (INIS)

    Omar, M.; Bowen, H.J.M.

    1982-01-01

    Tin(II) and tin(IV) are absorbed from aqueous solutions by Sephadex G-25 gel, from which they can be eluted by humates or fulvates, with which they interact more strongly. Methyltin species are not absorbed by Sephadex G-25, and so can be separated from inorganic tin. Both inorganic tin and methyltin species in natural waters at pH 7.4 can be quantitatively retained by passing through small columns of Chelex-100 resin: the methyltin species can then be washed off the resin with 4M nitric acid. Trimethyltin chloride 113 Sn in water scarcely interacts with fulvates, humates, kaolinite or montmorillonite but is absorbed by Sphagnum peat. Dimethyltin dichloride- 113 Sn reacts significantly with all the above materials after 2 hours equilibration. Methyltin trichloride- 113 Sn interacts weakly in alkaline solutions. (author)

  10. PCBs with immersion tin finish - some experiences with lead-free reflow process

    Energy Technology Data Exchange (ETDEWEB)

    Bukat, K.; Koziol, G.; Sitek, J.; Borecki, J.; Hackiewicz, H. [Tele and Radio Research Inst., Warsaw (Poland); Merkle, H.; Schroeder, S. [Ormecon Chemie GmbH and Co. KG, Ammersbek (Germany); Girulska, A.; Gardela, K. [Eldos Sp. z o.o., Wroclaw (Poland)

    2004-07-01

    Substitution of lead-free solders in electronic assemblies requires changes in the conventional SnPb finishes of PCBs. The Craft project ''PRINT'' objectives respond to this challenge. Its main goal is to develop and implement the new technology of high solderability immersion tin for printed circuit boards at small and medium enterprises. The subject of the research was organic based immersion tin coating which would fulfil demands of SMT. In the paper the results of reflow soldering process on PCBs covered by Ormecon registered immersion tin finish with using lead-free solder pastes will be described. Solderability of tin coating as well as wettability of lead-free solder paste will be presented. (orig.)

  11. Preparation of tin -heparin complex to be applied for myocardial infarct diagnosis

    International Nuclear Information System (INIS)

    Badi, J. M.; Al-Azzawi, H. A.; Resen, H. M.; Abed, I. G.; Owiad, H.; Manji, A. N.

    2012-12-01

    Tin-heparin complex has been prepared (liquid form) to be labeled with technetium-99 can be applied for diagnosis of myocardial infarcts vascular diseases and deep vein thrombosis. The preparation contents are 0.1mg tin chloride dehydrate and 1250 1.U of heparin. The results of the pH effect on the labeling yield indicated that high percentage of labeling yield (96.1%) was obtained in the optimal pH (5.50). The obtained results showed that the quantity of reducing agent (tin chloride dehydrate) and chelating agent (heparin) has no effect on the labeling yield. Results of radio analytical studies by paper chromatography technique wear confirmed by data obtained by Gel chromatography column scanning techniques. These techniques showed the high labeling yield of the tin-heparin complex. The persistence of high labeling yield for 8 hours is a good indication for its stability and efficiency for radio diagnosis examination in nuclear medicine centers. (Author)

  12. Amphibolites in the Rare Metal- and Tin-bearing Bastar – Malkangiri ...

    Indian Academy of Sciences (India)

    33

    21-10-284/1, Begumpet, Brahmanwadi Lane no. ... Odisha states of India, is well known for primary and secondary commercial deposits of tin .... carried out using the rapid wet chemical methods, essentially after Shapiro and Brannock. (1955).

  13. Effect of successful 131I treatment on the peripheral blood picture in hyperthyroid patients

    International Nuclear Information System (INIS)

    Li Xiaoping; He Yunnan; Hu Qingwu

    2004-01-01

    Objective: To investigate the effect of successful 131 I therapy on the levels peripheral blood picture in hyperthyroid patients. Methods: Serum T 3 , T 4 , TSH (with ACCESS microparticle chemiluminescence immunoassay) and blood Hb, RBC, WBC and DC, Plt (with COULTER three assortments) counts were determined in 110 controls and 210 hyperthyroid patients both before and after 131 I therapy. Results: 131 I treatment of hyperthyroidism in this group of patients was very successful (P 131 I therapy. Conclusion: The application of 131 I to treat hyperthyroidism was very successful with no remarkable effect on peripheral blood picture. (authors)

  14. Studies on the radiation burden using I-131 for thyroid therapy

    International Nuclear Information System (INIS)

    Krzesniak, J.W.; Chomicki, O.A.

    1980-01-01

    The exposure to personnel from 131 I inhaled from open sources during laboratory procedures and that exhaled by patients treated with 131 I was estimated. The method and the apparatus used to detect airborne 131 I are described. It was found that the ratio of the activity absorbed through the lungs to that permissible for a given category of exposure is not higher than 10%. The kinetics of the 131 I exhaled by patients seems to be complementary to that of 131 I concentration changes in the blood. (H.K.)

  15. The C-terminal extension unique to the long isoform of the shelterin component TIN2 enhances its interaction with TRF2 in a phosphorylation- and dyskeratosis congenita-cluster-dependent fashion.

    Science.gov (United States)

    Nelson, Nya D; Dodson, Lois M; Escudero, Laura; Sukumar, Ann T; Williams, Christopher L; Mihalek, Ivana; Baldan, Alessandro; Baird, Duncan M; Bertuch, Alison A

    2018-03-26

    TIN2 is central to the shelterin complex, linking the telomeric proteins TRF1 and TRF2 with TPP1/POT1. Mutations in TINF2 , which encodes TIN2, that are found in dyskeratosis congenita (DC) result in very short telomeres and cluster in a region shared by the two TIN2 isoforms, TIN2S (short) and TIN2L (long). Here we show that TIN2L, but not TIN2S, is phosphorylated. TRF2 interacts more with TIN2L than TIN2S, and both the DC-cluster and phosphorylation promote this enhanced interaction. The binding of TIN2L, but not TIN2S, is affected by TRF2-F120, which is also required for TRF2's interaction with end processing factors such as Apollo. Conversely, TRF1 interacts more with TIN2S than with TIN2L. A DC-associated mutation further reduces TIN2L-TRF1, but not TIN2S-TRF1, interaction. Cells overexpressing TIN2L or phosphomimetic-TIN2L are permissive to telomere elongation, whereas cells overexpressing TIN2S or phosphodead-TIN2L are not. Telomere lengths are unchanged in cell lines in which TIN2L expression has been eliminated by CRISPR/Cas9-mediated mutation. These results indicate that TIN2 isoforms are biochemically and functionally distinguishable, and that shelterin composition could be fundamentally altered in patients with TINF2 mutations. Copyright © 2018 Nelson et al.

  16. Intercomparison of 131I activity measurements in nuclear medicine

    International Nuclear Information System (INIS)

    Kim, G. Y.; Yang, H. K.; Lim, C. I.; Lee, H. K.; Jeong, H. K.

    2004-01-01

    Activity measurements in nuclear medicine using a dose calibrator have been performed for several decades and their reliability has varied. To minimise the radiation dose to patients with radionuclides, it is necessary to ensure that the sample administered is accurately assayed. Recognizing the importance of intercomparison in nuclear medicine and the need to make access to activity standards traceable to the international measurement system, the KFDA, as a national secondary standard dosimetry laboratory (SSDL), started an intercomparison program in 2002. This program was initiated by survey to all nuclear medicine centres regarding general information about their dose calibrators, radioisotopes etc. 71 nuclear medicine centres (79 dose calibrators) participated in the intercomparison program with 131 I isotope. To assess the accuracy of clinical measurements of the activity of 131 I solutions and to determine the reason for the disagreement, an intercomparison was conducted using 4 ml aliquots in 10 ml P6 vial with a total activity in the region of 10 -20 MBq. The reference time of decay for all solutions was 0:00 on 25 September 2002. The half-life used was 8.04 days. For the evaluation of solution in KFDA, a sealed, high pressure and re-entrant ionisation chamber, NPL-CRC radionuclide calibrators were used. The verification of our calibration quality was by means of a comparison with the Korea Primary Standard Laboratory (KRISS). The activity ratio of KFDA to KRISS for the 131 I solutions is 1.011. The difference between the value quoted by the clinic, A hospital and the value obtained by the KFDA, A KFDA , is expressed as a percent deviation, i.e. DEV(%) 100x(A hospital -A KFDA )/A KFDA . From the data obtained it was found that 61% of the calibrators showed a deviation within +/-5%; 23% had a deviation in the range 5% 131 I solution activity measurements, using dose calibrators in Koreas, and also to provide the participants with a traceable standard to

  17. Fabrication of heterojunction solar cells by improved tin oxide deposition on insulating layer

    Science.gov (United States)

    Feng, Tom; Ghosh, Amal K.

    1980-01-01

    Highly efficient tin oxide-silicon heterojunction solar cells are prepared by heating a silicon substrate, having an insulating layer thereon, to provide a substrate temperature in the range of about 300.degree. C. to about 400.degree. C. and thereafter spraying the so-heated substrate with a solution of tin tetrachloride in a organic ester boiling below about 250.degree. C. Preferably the insulating layer is naturally grown silicon oxide layer.

  18. Determination of tin, chromium, cadmium and lead in canned fruits from the Czech market

    Directory of Open Access Journals (Sweden)

    Pavel Diviš

    2017-01-01

    Full Text Available The global production of metal cans is more than 300 billion cans. Benefits of metal packaging consist mainly from the great strenght, excellent barrier properties and good thermal conductivity. The main problem of used metal packaging are the corrosion processes. The corrosion of metal container causes dissolution of tin which is used as a protective layer of the steel shell of the can and other metallic elements used in the manufacture of cans. In this work 31 samples of canned fruit was analysed and the concentration of tin, chromium, cadmium and lead was determined in fruit and in syrup using ICP-OES and ICP-MS techniques. The results showed no difference between the concentration of analysed elements in fruit and in syrup. In none of the analyzed samples the permitted maximum concentration of tin 200 mg.kg-1 was exceeded. Maximum concentration of tin was measured in canned grepfruit (59.8 ±1.9 mg.kg-1. The age of cans had no significant effect on the concentration of tin in canned fruit. The concentration of tin in fruit packaged in cans with protective layer of lacquer was significantly lower than the concentration of tin in fruit packaged in cans without protective layer of lacquer. Concentration of chromium, cadmium and lead in the analysed samples was very low at the natural levels of occurrence of these metals in fruit and it was impossible to determine unequivocally that the measured concentrations of these metals in canned fruit originate from the corrosion of can. The corrosion of the tinplate was studied using scanning electron microscopy with an energy dispersive spectrometer. By analyzing the SEM pictures and EDS spectra, critical areas of tin plate corrosion were observed. Based on the measured results it can be concluded that the consumption of fresh canned fruit is not a major problem for the inhabitants of the Czech Republic in terms of intake of potentially hazardous metals.

  19. Preparation of 99mTc- Tin colloid: a freeze-dried kit for liver imaging

    International Nuclear Information System (INIS)

    Hamada, E.S.; Muramoto, E.; Barbosa, M.R.F. de; Colturato, M.T.; Herrerias, R.

    1988-07-01

    99m Tc-tin-colloid was formulated as a useful agent for liver imaging. The radiochemical purity and stability of the labeled colloid were determined by paper chromatography and 85% methanol solvent, the labelling efficiency was > 95%. The comparative studies of the biological distribution of 99m Tc-tin-colloid and 99 Tc-Sulphur-colloid were made with Wistar rats. The results of organ distribution were similar in both products; > 90% liver uptake. (author) [pt

  20. Hydrothermal treatment for TiN as abrasion resistant dental implant coating and its fibroblast response

    International Nuclear Information System (INIS)

    Shi, Xingling; Xu, Lingli; Munar, Melvin L.; Ishikawa, Kunio

    2015-01-01

    Dental implant made of pure titanium (Ti) is prone to scratch and abrasion during routine oral hygiene procedures. This results an increase in surface roughness and therefore, facilitates the adhesion of bacteria. In severe cases, this could lead to peri-implantitis. To overcome this problem, surface modification of Ti is necessary to improve its abrasion resistance. Besides, a strong implant–gingiva interface should also be guaranteed to prevent the adhesion of bacteria. In this study, titanium nitride (TiN) coating was first prepared with gas nitriding to increase surface hardness of pure the substrate. Then, the TiN was hydrothermally treated in CaCl 2 solution in order to improve its soft tissue biocompatibility. The effect of hydrothermal treatment temperature on surface properties of TiN was investigated and its biocompatibility was assessed in vitro using NIH3T3 fibroblast cell. It was determined that 120 °C was the critical temperature for the hydrothermal treatment condition. Treatment below 120 °C could incorporate Ca into TiN surface, oxidize TiN surface partially and then improve the wettability while preserving its morphology and hardness. Fibroblast cell attachment and proliferation were improved and cell spreading was enhanced on hydrothermally treated specimens compared with untreated ones. Improved wettability, Ca incorporation and negative surface due to interstitial N were believed to be the main reasons. Hydrothermal treatment is expected to make TiN a promising dental implant coating with excellent abrasion resistance and good soft tissue affinity. - Highlights: • Ca was incorporated into TiN surface while not sacrificing its hardness. • Interstitial N due to oxidation promoted Ca adsorption and cell adhesion. • Hydrothermal treatment makes TiN a promising coating for dental implant

  1. RF measurements of a traveling-wave muffin-tin accelerating structure at 90 GHz

    International Nuclear Information System (INIS)

    Chou, P.J.; Bowden, G.B.; Copeland, M.R.; Menegat, A.; Pritzkau, D.P.; Siemann, R.H.

    1997-05-01

    A measuring system at the table-top scale was developed for RF measurements of a muffin-tin accelerating structure operating at 32 times the SLAC frequency (2.856 GHz). Both perturbation and non-perturbation methods are employed to characterize the RF properties of a muffin-tin structure. Conventional bead pull measurements are extended to millimeter wavelengths. Design of the measuring system and preliminary results of RF measurements are presented

  2. Hydrothermal treatment for TiN as abrasion resistant dental implant coating and its fibroblast response

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Xingling, E-mail: shixingling1985@hotmail.com [School of Material Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Department of Biomaterials, Faculty of Dental Science, Kyushu University, Fukuoka 812-8582 (Japan); Jiangsu Provincial Key Laboratory for Interventional Medical Devices, Huaiyin Institute of Technology, Huaian 223003 (China); Xu, Lingli [School of Material Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Munar, Melvin L.; Ishikawa, Kunio [Department of Biomaterials, Faculty of Dental Science, Kyushu University, Fukuoka 812-8582 (Japan)

    2015-04-01

    Dental implant made of pure titanium (Ti) is prone to scratch and abrasion during routine oral hygiene procedures. This results an increase in surface roughness and therefore, facilitates the adhesion of bacteria. In severe cases, this could lead to peri-implantitis. To overcome this problem, surface modification of Ti is necessary to improve its abrasion resistance. Besides, a strong implant–gingiva interface should also be guaranteed to prevent the adhesion of bacteria. In this study, titanium nitride (TiN) coating was first prepared with gas nitriding to increase surface hardness of pure the substrate. Then, the TiN was hydrothermally treated in CaCl{sub 2} solution in order to improve its soft tissue biocompatibility. The effect of hydrothermal treatment temperature on surface properties of TiN was investigated and its biocompatibility was assessed in vitro using NIH3T3 fibroblast cell. It was determined that 120 °C was the critical temperature for the hydrothermal treatment condition. Treatment below 120 °C could incorporate Ca into TiN surface, oxidize TiN surface partially and then improve the wettability while preserving its morphology and hardness. Fibroblast cell attachment and proliferation were improved and cell spreading was enhanced on hydrothermally treated specimens compared with untreated ones. Improved wettability, Ca incorporation and negative surface due to interstitial N were believed to be the main reasons. Hydrothermal treatment is expected to make TiN a promising dental implant coating with excellent abrasion resistance and good soft tissue affinity. - Highlights: • Ca was incorporated into TiN surface while not sacrificing its hardness. • Interstitial N due to oxidation promoted Ca adsorption and cell adhesion. • Hydrothermal treatment makes TiN a promising coating for dental implant.

  3. Elaboration and test of the method of separation of alkaline metals ions with tin phosphate

    International Nuclear Information System (INIS)

    Smirnov, G.I.; Chernyak, A.S.; Kostromina, O.N.; Kachur, N.Ya.; Shpeyzer, B.G.

    1986-01-01

    Present work is devoted to elaboration and test of the method of separation of alkaline metals ions with tin phosphate. Thus, the isotherms of sorption of lithium, sodium, potassium, rubidium and cesium ions with amorphous tin phosphate depending on their concentration, ph of solution, sorbent quantity are obtained. The parameters of extraction of potassium microquantities from sodium salts are defined. Ultra pure sodium chloride, sodium iodide, sodium sulphate, sodium nitrate, sodium nitrite, sodium phosphate are synthesized.

  4. Restoration of Soil Physical and Chemical Properties of Abandoned Tin- Mining in Bangka Belitung Islands

    OpenAIRE

    Ishak Yuarsah; Etik Puji Handayani; Rakhmiati; Yatmin

    2017-01-01

    The practices of tin mining that remove all soil layers on top of the mineral deposit layers have caused serious environmental problems, i.e. degradation of soil physical and chemical properties and disappearance of vegetation, flora and fauna in ecosystems, which further can change the local microclimate. The tailing area of tin mining have unstable soil structure and low organic matter content, so it is vulnerable to land slides and erosion. The characteristics of the soils in the tailing a...

  5. Metalorganic atomic layer deposition of TiN thin films using TDMAT and NH3

    International Nuclear Information System (INIS)

    Kim, Hyo Kyeom; Kim, Ju Youn; Park, Jin Yong; Kim, Yang Do; Kim, Young Do; Jeon, Hyeong Tag; Kim, Won Mok

    2002-01-01

    TiN films were deposited by using the metalorganic atomic layer deposition (MOALD) method using tetrakis-dimethyl-amino-titanium (TDMAT) as the titanium precursor and ammonia (NH 3 ) as the reactant gas. Two saturated TiN film growth regions were observed in the temperature ranges from 175 and 190 .deg. C and from 200 and 210 .deg. C. TiN films deposited by the MOALD technique showed relatively lower carbon content than films deposited by metalorganic chemical vapor deposition (MOCVD) method. TiN films deposited at around 200 .deg. C under standard conditions showed the resistivity values as low as 500 μΩ-cm, which is about one order lower than the values for TiN films deposited by MOCVD using TDMAT or TDMAT with NH 3 . Also, the carbon incorporation and the resistivity were further decreased with increasing Ar purge time and flow rate. TiN films deposited at temperature below 300 .deg. C showed amorphous characteristics. TiN film deposited on contact holes, about 0.4-μm wide and 0.8-μm deep, by using the MOALD method showed excellent conformal deposition with almost 100% step coverage. This study demonstrates that the processing parameters need to be carefully controlled to optimize the film properties that the processing parameters need to be carefully controlled to optimize the film properties when using the ALD technique and that TiN films deposited by using the MOALD method exhibited excellent film properties compared to those of films deposited by using other CVD methods

  6. Computing LS factor by runoff paths on TIN

    Science.gov (United States)

    Kavka, Petr; Krasa, Josef; Bek, Stanislav

    2013-04-01

    The article shows results of topographic factor (the LS factor in USLE) derivation enhancement focused on detailed Airborne Laser Scanning (ALS) based DEMs. It describes a flow paths generation technique using triangulated irregular network (TIN) for terrain morphology description, which is not yet established in soil loss computations. This technique was compared with other procedures of flow direction and flow paths generation based on commonly used raster model (DEM). These overland flow characteristics together with therefrom derived flow accumulation are significant inputs for many scientific models. Particularly they are used in all USLE-based soil erosion models, from which USLE2D, RUSLE3D, Watem/Sedem or USPED can be named as the most acknowledged. Flow routing characteristics are also essential parameters in physically based hydrological and soil erosion models like HEC-HMS, Wepp, Erosion3D, LISEM, SMODERP, etc. Mentioned models are based on regular raster grids, where the identification of runoff direction is problematic. The most common method is Steepest descent (one directional flow), which corresponds well with the concentration of surface runoff into concentrated flow. The Steepest descent algorithm for the flow routing doesn't provide satisfying results, it often creates parallel and narrow flow lines while not respecting real morphological conditions. To overcome this problem, other methods (such as Flux Decomposition, Multiple flow, Deterministic Infinity algorithm etc.) separate the outflow into several components. This approach leads to unrealistic diffusion propagation of the runoff and makes it impossible to be used for simulation of dominant morphological features, such as artificial rills, hedges, sediment traps etc. The modern methods of mapping ground elevations, especially ALS, provide very detailed models even for large river basins, including morphological details. New algorithms for derivation a runoff direction have been developed as

  7. Antimony Doped Tin Oxides and Their Composites with Tin pyrophosphates as Catalyst Supports for Oxygen Evolution Reaction in Proton Exchange Membrane Water Electrolysis

    DEFF Research Database (Denmark)

    Xu, Junyuan; Li, Qingfeng; Christensen, Erik

    2012-01-01

    Proton exchange membrane water electrolysers operating at typically 80 °C or at further elevated temperatures suffer from insufficient catalyst activity and durability. In this work, antimony doped tin oxide nanoparticles were synthesized and further doped with an inorganic proton conducting phase...... based on tin pyrophosphates as the catalyst support. The materials showed an overall conductivity of 0.57 S cm−1 at 130 °C under the water vapor atmosphere with a contribution of the proton conduction. Using this composite support, iridium oxide nanoparticle catalysts were prepared and characterized...

  8. Corrosion Behavior of Carbon Steel in Concrete Material Composed of Tin Slag Waste in Aqueous Chloride Solution

    Science.gov (United States)

    Rustandi, Andi; Cahyadi, Agung; Taruli Siallagan, Sonia; Wafa' Nawawi, Fuad; Pratesa, Yudha

    2018-01-01

    Tin slag is a byproduct of tin ore smelting process which is rarely utilized. The main purpose of this work is to investigate the use of tin slag for concrete cement material application compared to the industrial Ordinary Portland Cement (OPC). Tin slag composition was characterized by XRD and XRF analysis. The characterization results showed the similar chemical composition of tin slag and OPC. It also revealed the semi crystalline structure of tin slag sample. Several electrochemical tests were performed to evaluate corrosion behavior of tin slag, OPC and various mixed composition of both materials and the addition of CaO. The corrosion behavior of OPC and tin slag were evaluated by using Cyclic Polarization, Electrochemical Impedance Spectroscopy (EIS) and Electrochemical Frequency Modulation (EFM) methods. Aqueous sodium chloride (NaCl) solution with 3.5% w.t concentration which similar to seawater was used as the electrolyte in this work. The steel specimen used as the reinforce bar (rebar) material of the concrete was carbon steel AISI 1045. The rebar was embedded in the concrete cement which composed of OPC and the various composition of tin slag including slag without addition of CaO and slag mixed with addition of 50 % CaO. The electrochemical tests results revealed that tin slag affected its corrosion behavior which becoming more active and increasing the corrosion rate as well as decreasing the electrochemical impedance.

  9. Organic derivatives of tin (II/IV): Investigation of their structure

    Energy Technology Data Exchange (ETDEWEB)

    Szirtes, L., E-mail: szirtes@iki.kfki.h [Institute of Isotopes of the Hungarian Academy of Sciences, Budapest H-1525, P.O. Box 77 (Hungary); Megyeri, J., E-mail: megyeri@iki.kfki.h [Institute of Isotopes of the Hungarian Academy of Sciences, Budapest H-1525, P.O. Box 77 (Hungary); Kuzmann, E. [Laboratory of Nuclear Chemistry, CRC of the Hungarian Academy of Science at Eoetvoes University, H-1518 Budapest, P.O. Box 32 (Hungary); Beck, A. [Institute of Isotopes of the Hungarian Academy of Sciences, Budapest H-1525, P.O. Box 77 (Hungary)

    2011-07-15

    The structures of tin(II)-oxalate, tin(IV)Na-EDTA and tin(IV)Na{sub 8}-inositol hexaphosphate were investigated using XRD analysis. Samples were identified using the Moessbauer study, thermal analysis and FTIR spectrometry. The Moessbauer study determined two different oxidation states of tin atoms, and consequently two different tin surroundings in the end products. The tin oxalate was found to be orthorhombic with space group Pnma, a=9.2066(3) A, b=9.7590(1) A, c=13.1848(5) A, V=1184.62 A{sup 3} and Z=8. SnNa-EDTA was found to be monoclinic with space group P2{sub 1}/c{sub 1}, a=10.7544(3) A, b=10.1455(3) A, c=16.5130(6) A, {beta}=98.59(2){sup o}, V=1781.50(4) A{sup 3} and Z=4. Sn(C{sub 6}H{sub 6}Na{sub 8}O{sub 24}P{sub 6}) was found to be amorphous.

  10. Stability of tinned food from pigs radiated with various doses of ionizing rays

    International Nuclear Information System (INIS)

    Kossakowska, A.; Kossakowski, S.; Widenska, T.; Wojton, B.

    1978-01-01

    The examinations were carried out on 347 tinned food made of meat from pigs exposed to radiation of 300 and 600 R. The animals were irradiated with 60 Co. The pigs irradiated with 300 R were slaughtered after 7 and 14 days, and these with 600 R after 7 and 12 days; the control animals were killed after 14 days. Post-slaughter visual and microbiological examinations were performed by seeding the samples of the blood, muscles, lymphnodes and internal organs for the presence of Salmonella sp. Meat was pickled and heated up to 67-68 0 C (in the center of tinned food). The lowest stability showed the tinned food made of pigs irradiated with 600 R and killed after 12 days. Chemical examinations of the tinned food stored at 6 0 C revealed the prevalence of oxydative processes in fat over hydrolitic ones. The difference in acid number between tinned food under test and controls appeared after 6 months. Peroxides occurred in the control after 6 months and in these under examination after 3 months, and the level was 4.00-5.80 apart from the tins made of meat of pigs irradiated with 300 R and slaughtered after 7 days. (author)

  11. Isotope Dilution - Thermal Ionisation Mass Spectrometric Analysis for Tin in a Fly Ash Material

    International Nuclear Information System (INIS)

    Hernandez, C.; Fernandez, M.; Quejido, A. L.

    2006-01-01

    Isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) analysis has been applied to the determination of tin in a fly ash sample supplied by the EC Joint Research Centre (Ispra, Italy). The proposed procedure includes the silica gel/phosphoric acid technique for tin thermal ionisation activation and a strict heating protocol for isotope ratio measurements. Instrumental mass discrimination factor has been previously determined measuring a natural tin standard solution. Spike solutions has been prepared from 112Sn-enriched metal and quantified by reverse isotope dilution analysis. Two sample aliquots were spiked and tin was extracted with 4,5 M HCI during 25 min ultrasound esposure time. Due to the complex matrix of this fly ash material, a two-steps purification stage using ion-exchange chromatography was required prior TIMS analysis. Obtained results for the two sample-spike blends (10,10 + - 0,55 y 10,50 + - 0,64 imolg-1) are comprarable, both value and uncertainty. Also a good reproducibility is observed between measurements. The proposed ID-TIMS procedure, as a primary method and due to the lack of fly ash reference material certified for tin content, can be used to validate more routine methodologies applied to tin determination in this kind of materials. (Author) 75 refs

  12. Hierarchical TiN nanoparticles-assembled nanopillars for flexible supercapacitors with high volumetric capacitance.

    Science.gov (United States)

    Qin, Ping; Li, Xingxing; Gao, Biao; Fu, Jijiang; Xia, Lu; Zhang, Xuming; Huo, Kaifu; Shen, Wenli; Chu, Paul K

    2018-05-10

    Titanium nitride (TiN) is an attractive electrode material in fast charging/discharging supercapacitors because of its excellent conductivity. However, the low capacitance and mechanical brittleness of TiN restricts its further application in flexible supercapacitors with high energy density. Thus, it is still a challenge to rationally design TiN electrodes with both high electrochemical and mechanical properties. Herein, the hierarchical TiN nanoparticles-assembled nanopillars (H-TiN NPs) array as binder free electrodes were obtained by nitriding of hierarchical titanium dioxide (TiO2) nanopillars, which was produced by a simple hydrothermal treatment of anodic TiO2 nanotubes (NTs) array in water. The porous TiN nanoparticles connected to each other to form ordered nanopillar arrays, effectively providing larger specific surface area and more active sites for charge storage. The H-TiN NPs delivered a high volumetric capacitance of 120 F cm-3 at 0.83 A cm-3, which is better than that of TiN NTs arrays (69 F cm-3 at 0.83 A cm-3). After assembling into all-solid-state devices, the H-TiN NPs based supercapacitors exhibited outstanding volumetric capacitance of 5.9 F cm-3 at 0.02 A cm-3 and a high energy density of 0.53 mW h cm-3. Our results reveal a new strategy to optimize the supercapacitive performance of metal nitrides.

  13. Inductively coupled plasma atomic emission spectrometric determination of tin in canned food.

    Science.gov (United States)

    Sumitani, H; Suekane, S; Nakatani, A; Tatsuka, K

    1993-01-01

    Various canned foods were digested sequentially with HNO3 and HCl, diluted to 100 mL, and filtered, and then tin was determined by inductively coupled plasma atomic emission spectrometry (ICP/AES). Samples of canned Satsuma mandarin, peach, apricot, pineapple, apple juice, mushroom, asparagus, evaporated milk, short-necked clam, spinach, whole tomato, meat, and salmon were evaluated. Sample preparations did not require time-consuming dilutions, because ICP/AES has wide dynamic range. The standard addition method was used to determine tin concentration. Accuracy of the method was tested by analyzing analytical standards containing tin at 2 levels (50 and 250 micrograms/g). The amounts of tin found for the 50 and 250 micrograms/g levels were 50.5 and 256 micrograms/g, respectively, and the repeatability coefficients of variation were 4.0 and 3.8%, respectively. Recovery of tin from 13 canned foods spiked at 2 levels (50 and 250 micrograms/g) ranged from 93.9 to 109.4%, with a mean of 99.2%. The quantitation limit for tin standard solution was about 0.5 microgram/g.

  14. Wear of tin coating and Al-Si alloy substrate against carburized steel under mixed lubrication

    Science.gov (United States)

    Wang, Q.; Cheng, H. S.; Fine, M. E.

    1994-04-01

    Tin coatings on Al-Si alloys are widely used in the automotive industries. The soft tin coating and the harder substrate alloy form a tribological system with the advantages of low friction and reasonably high load-bearing capacity. Wear tests of tin coated Al-Si Z332 alloy in conformal contact against carburized 1016 steel have been carried out under mixed lubrications with SAE 10W30 oil to study the wear mechanisms. Two major wear mechanisms, uniform wear of the tin coating due to micro-plowing and spall pitting related to the substrate are found to contribute to the bearing material loss when the fluid lubrication film is relatively thick (Lambda about 1.6). Under conditions of thinner films (Lambda approximately = 0.8), some local coating debonding occurs. The pitting and local coating debounding are closely related to fracture in the substrate. The bonding between silicon and tin seems to be weaker than between aluminum and tin. During wear, oxidation occurs.

  15. Study on the removal of iron impurities in methanesulfonic acid tin plating bath

    Science.gov (United States)

    Hou-li, LIU; Jian-Jun, CHEN; Hong-Liang, PAN

    2018-03-01

    This thesis investigated the the influence of sodium sulfite as reducing agent on the recovery rate of tin ion. The approach is that HZ016 type cation exchange resin was used to adsorb Sn2+ and Fe2+ in electroplated tin solution first. After adsorption, the resin was removed by sulfuric acid, which was added with NaOH to adjust pH value to form precipitation and separate tin. X-ray diffraction (XRD) and energy spectrum (EDS) method were used to analyze the composition of the precipitates adjusted by pH. The results show that when the mass ratio of resin to bath is 1:2, the adsorption efficiency of resin reaches 98.3% and 97.1% respectively, and the elution efficiency of tin and iron reaches 95.1% and 94% respectively when the mass ratio of resin to eluent sulfuric acid is 1:4. Sodium sulfite was added to increase the efficiency of tin recovery by 8.1%. EDS and XRD atlas showed that after pH regulation, the main composition of the filtration precipitation was the hydroxides of tin.

  16. Studies on tin based inorganic ion exchangers for fission products separation

    International Nuclear Information System (INIS)

    Dash, A.; Balasubramanian, K.R.; Murthy, T.S.

    1993-01-01

    Tin(IV) antimonate and hydrous tin(IV) oxide have been prepared and their characteristics are evaluated. A new method has been finalized for the separation of 95 Zr- 95 Nb from irradiated uranium using hydrous tin(IV) oxide. In this process, the irradiated sample is dissolved in concentrated HNO 3 , evaporated to near dryness and taken up in 0.5 M HNO 3 . The solution is passed over tin(IV) oxide column and the isotope eluted with 10 M HNO 3 . The product is obtained in pure nitrate form which is generally preferred for different applications. A method has been finalized for the separation of 106 Ru from fission product solution using tin(IV) antimonate. In this method fission product solution is adjusted to 2 M with respect to nitric acid, 137 Cs is separated on a column of ammonium phosphomolybdate, the effluent after adjustment of acidity to 0.2 M is then passed over a column of tin(IV) antimonate where the effluent contains pure 106 Ru. (author). 14 refs., 6 figs., 2 tabs

  17. Multi - pulse tea CO2 laser beam interaction with the TiN thin films

    International Nuclear Information System (INIS)

    Gakovic, B.; Trtica, M.; Nenadovic, T.; Pavlicevic, B.

    1998-01-01

    The interaction of various types of energetic beams including a laser beam with the high-hardness coatings is of great fundamental and technological interest. The Nd:YAG, excimer and CO 2 are frequently used laser beams for this purpose. The interaction of a laser beam with low thickness coatings, deposited on austenitic stainless steel, is insufficiently known in the literature. Titanium nitride (TiN) possess the excellent physico-chemical characteristics. For this reason TiN films/coatings are widely used. The purpose of this article is a consideration of the effect of TEA C0 2 laser radiation on the TiN film deposited on austenitic stainless steel substrate (AISI 316). Investigation of TiN morphological changes, after multipulse laser irradiation, shown dependence on laser fluence, number of laser pulses and the laser pulse shape. Subsequently fast heating and cooling during multi-pulse laser bombardment cause the grain growth of TiN layer. Both laser pulses (pulses with tail and tail-free pulses) produced periodical wave like structure on polished substrate material. Periodicity is observed also on AISI 316 protected with TiN layer, but only with laser pulse with tail. (author)

  18. Nuclear decay scheme studies of 30-h 131Te/sup m/, 25-min 131Te/sup g/, and 55.5-min 105Cd

    International Nuclear Information System (INIS)

    Jackson, S.V.

    1975-01-01

    High-resolution Ge(Li) detectors have been used to observe γ-ray singles and coincidence spectra of 30-h 11 / 2 - , /sup 131m/Te, 25-min 3 / 2 + , and 55.5-min 5 / 2 + 105 Cd. Sources of /sup 131m/Te and /sup 131g/Te were produced by neutron irradiation of enriched 130 Te metal, and, in the case of /sup 131m/Te, were chemically purified to remove the 131 I daughter. A total of 190 and 80 γ-rays are attributed to the decays of /sup 131m/Te and /sup 131g/Te, respectively; and 174 and 77 of these transitions have been placed in a 131 I level scheme involving 52 excited states. Absolute β group intensities were determined for the transitions to 131 I levels. Spin and parity assignments were made for all observed levels. The β feeding from the 11 / 2 - /sup 131m/Te to the 7 / 2 + 131 I ground state was determined to be (5.2 +- 3.0) percent (log ft = 10.5). The isomeric transition of 11 / 2 - /sup 131m/Te to 3 / 2 + /sup 131g/Te was determined to be (22.2 +- 1.6) percent. The 6-nsec isomer in 131 I at 1797 keV has been assigned as 15 / 2 - and interpreted as a πν 1 ν 2 three quasi-particle state. Sources of 105 Cd were produced via the 106 Cd(n,2n) reaction on enriched 106 CdO using 14 MeV neutrons. A total of 274 γ-rays are attributed to the decay of 105 Cd, and 248 of these have been placed in a 105 Ag level scheme involving 50 excited states. Absolute values for the β + /EC transition intensities to 105 Ag levels were determined. The β + /EC feeding from the 5 / 2 + 105 Cd to the 7 / 2 + 25.5-keV isomeric state in 105 Ag was determined to be (51.4 +- 4.0) percent (log ft = 5.4). The experimentally determined level structures of 131 I and 105 Cd are interpreted in terms of the shell model and core excitation considerations with emphasis placed on the core coupling model and the three-particle models. (U.S.)

  19. A Comparative Study of 131I-Hippuran Renogram, 131I-Hippuran Urinary Excretion Test and Intravenous Pyelogram in Obstructive Uropathy due to Cancerous Invasion

    International Nuclear Information System (INIS)

    Park, Kee Bok; Rhee, Chong Heon; Hong, Chang Gi; Park, Soo Seong; Koh, Chang Soon

    1968-01-01

    A comparative study of 131 I-hippuran renogram, 131 I-hippuran excretion test and intravenous pyelogram were performed in 61 cases of gynecological cancer. The following were the results: 1) Among 40 cases of cervix cancer showing normal excretory urography 7 cases (17.5%) were found to have unilateral or bilateral delayed excretory pattern on 131 I-hippuran renogram and on the contrary only 2 cases (5.7%) showed a mild caliectatic change on excretory urography among 35 cases of gynecological cancer showing normal pattern of 131 I-hippuran renogram. 2) In the group showing unilateral of bilateral delayed excretory pattern of 131 I-hippuran renogram there was a reduction of 131 I-hippuran excretion in the first 20 minutes, but there was no significant difference of 131 I-hippuran excretion in 60 minutes compared with that of normal renogram group. 3) In the group showing unilateral non-functioning pattern of 131 I-hippuran renogram in one side and normal pattern in the other side there was found to be no difference in 131 I-hippuran excretion amount compared with that of normal renogram group. 4) It was evident from these experimental study that 131 I-hippuran renogram was considered as a good examination method for the evaluation of obstructive uropathy, and if one side kidney was intact it might compensate for the other diseased kidney so far as to renal excretory function. It was also shown that the more severe the cancerous spread in the pelvic wall the more changes on 131 I-hippuran renogram.

  20. Toxicity of upfront {sup 131}I-metaiodobenzylguanidine ({sup 131}I-MIBG) therapy in newly diagnosed neuroblastoma patients: a retrospective analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bleeker, Gitta; Schoot, Reineke A.; Caron, Huib N.; Kraker, Jan de; Tytgat, Godelieve A. [Emma Children' s Hospital, Academic Medical Centre (AMC), Department of Paediatric Oncology, PO Box 22700, Amsterdam (Netherlands); Hoefnagel, Cees A. [National Cancer Institute (NKI-AvL), Department of Nuclear Medicine, Amsterdam (Netherlands); Eck, Berthe L. van [Academic Medical Centre (AMC), Department of Nuclear Medicine, Amsterdam (Netherlands)

    2013-10-15

    In the treatment of patients with high-risk neuroblastoma, different doses of {sup 131}I-metaiodobenzylguanidine ({sup 131}I-MIBG) are administered at different time points during treatment. Toxicity, mainly haematological (thrombocytopenia), from {sup 131}I-MIBG therapy is known to occur in extensively chemotherapy pretreated neuroblastoma patients. Up to now, acute toxicity from {sup 131}I-MIBG as initial treatment has never been studied in a large cohort. The aim of this retrospective study was to document acute toxicity related to upfront {sup 131}I-MIBG. All neuroblastoma patients (stages 1-4 and 4S) treated upfront with {sup 131}I-MIBG at the Emma Children's Hospital, Academic Medical Centre (1992 - 2008) were included in this retrospective analysis. The acute toxicity (during therapy) and short-term toxicity (1st month following therapy) of the first two {sup 131}I-MIBG therapies were studied. Of 66 patients (34 boys, 32 girls; median age 2.2 years, range 0.1 - 9.4 years), 49 had stage 4 disease, 5 stage 4S, 6 stage 3, 1 stage 2 and 5 stage 1. The median first dose was 441 MBq/kg (range 157 - 804 MBq/kg). The median second dose was 328 MBq/kg (range 113 - 727 MBq/kg). The most frequently observed symptoms were nausea and vomiting (21 %, maximum grade II). The main toxicity was grade IV haematological, occurring only in stage 4 patients, after the first and second {sup 131}I-MIBG therapies: anaemia (5 % and 4 %, respectively), leucocytopenia (3 % and 4 %) and thrombocytopenia (2 % and 4 %). No stem cell rescue was needed. The main acute toxicity observed was haematological followed by nausea and vomiting. One patient developed posterior reversible encephalopathy syndrome during {sup 131}I-MIBG therapy, possibly related to {sup 131}I-MIBG. We consider {sup 131}I-MIBG therapy to be a safe treatment modality. (orig.)

  1. A Comparative Study of {sup 131}I-Hippuran Renogram, {sup 131}I-Hippuran Urinary Excretion Test and Intravenous Pyelogram in Obstructive Uropathy due to Cancerous Invasion

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kee Bok; Rhee, Chong Heon; Hong, Chang Gi; Park, Soo Seong; Koh, Chang Soon [Radiological Research Institue, Seoul (Korea, Republic of)

    1968-03-15

    A comparative study of {sup 131}I-hippuran renogram, {sup 131}I-hippuran excretion test and intravenous pyelogram were performed in 61 cases of gynecological cancer. The following were the results: 1) Among 40 cases of cervix cancer showing normal excretory urography 7 cases (17.5%) were found to have unilateral or bilateral delayed excretory pattern on {sup 131}I-hippuran renogram and on the contrary only 2 cases (5.7%) showed a mild caliectatic change on excretory urography among 35 cases of gynecological cancer showing normal pattern of {sup 131}I-hippuran renogram. 2) In the group showing unilateral of bilateral delayed excretory pattern of {sup 131}I-hippuran renogram there was a reduction of {sup 131}I-hippuran excretion in the first 20 minutes, but there was no significant difference of {sup 131}I-hippuran excretion in 60 minutes compared with that of normal renogram group. 3) In the group showing unilateral non-functioning pattern of {sup 131}I-hippuran renogram in one side and normal pattern in the other side there was found to be no difference in {sup 131}I-hippuran excretion amount compared with that of normal renogram group. 4) It was evident from these experimental study that {sup 131}I-hippuran renogram was considered as a good examination method for the evaluation of obstructive uropathy, and if one side kidney was intact it might compensate for the other diseased kidney so far as to renal excretory function. It was also shown that the more severe the cancerous spread in the pelvic wall the more changes on {sup 131}I-hippuran renogram.

  2. Polycrystalline Mn-alloyed indium tin oxide films

    International Nuclear Information System (INIS)

    Scarlat, Camelia; Schmidt, Heidemarie; Xu, Qingyu; Vinnichenko, Mykola; Kolitsch, Andreas; Helm, Manfred; Iacomi, Felicia

    2008-01-01

    Magnetic ITO films are interesting for integrating ITO into magneto-optoelectronic devices. We investigated n-conducting indium tin oxide (ITO) films with different Mn doping concentration which have been grown by chemical vapour deposition using targets with the atomic ratio In:Sn:Mn=122:12:0,114:12:7, and 109:12:13. The average film roughness ranges between 30 and 50 nm and XRD patterns revealed a polycrystalline structure. Magnetotransport measurements revealed negative magnetoresistance for all the samples, but high field positive MR can be clearly observed at 5 K with increasing Mn doping concentration. Spectroscopic ellipsometry (SE) has been used to prove the existence of midgap states in the Mn-alloyed ITO films revealing a transmittance less than 80%. A reasonable model for the ca. 250 nm thick Mn-alloyed ITO films has been developed to extract optical constants from SE data below 3 eV. Depending on the Mn content, a Lorentz oscillator placed between 1 and 2 eV was used to model optical absorption below the band gap

  3. Surface energy for electroluminescent polymers and indium-tin-oxide

    International Nuclear Information System (INIS)

    Zhong Zhiyou; Yin Sheng; Liu Chen; Zhong Youxin; Zhang Wuxing; Shi Dufang; Wang Chang'an

    2003-01-01

    The contact angles on the thin films of poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and indium-tin-oxide (ITO) were measured by the sessile-drop technique. The surface energies of the films were calculated using the Owens-Wendt (OW) and van Oss-Chaudhury-Good (vOCG) approaches. The overall total surface energies of MEH-PPV and the as-received ITO were 30.75 and 30.07 mJ/m 2 , respectively. Both approaches yielded almost the same surface energies. The surface energies were mainly contributed from the dispersion interactions or Lifshitz-van der Waals (LW) interactions for both MEH-PPV and ITO. The changes in the contact angles and surface energies of the ITO films, due to different solvent cleaning processes and oxygen plasma treatments, were analyzed. Experimental results revealed that the total surface energy of the ITO films increased after various cleaning processes. In comparison with different solvents used in this study, we found that methanol is an effective solvent for ITO cleaning, as a higher surface energy was observed. ITO films treated with oxygen plasma showed the highest surface energy. This work demonstrated that contact angle measurement is a useful method to diagnose the cleaning effect on ITO films

  4. Extreme ultraviolet patterning of tin-oxo cages

    Science.gov (United States)

    Haitjema, Jarich; Zhang, Yu; Vockenhuber, Michaela; Kazazis, Dimitrios; Ekinci, Yasin; Brouwer, Albert M.

    2017-07-01

    We report on the extreme ultraviolet (EUV) patterning performance of tin-oxo cages. These cage molecules were already known to function as a negative tone photoresist for EUV radiation, but in this work, we significantly optimized their performance. Our results show that sensitivity and resolution are only meaningful photoresist parameters if the process conditions are optimized. We focus on contrast curves of the materials using large area EUV exposures and patterning of the cages using EUV interference lithography. It is shown that baking steps, such as postexposure baking, can significantly affect both the sensitivity and contrast in the open-frame experiments as well as the patterning experiments. A layer thickness increase reduced the necessary dose to induce a solubility change but decreased the patterning quality. The patterning experiments were affected by minor changes in processing conditions such as an increased rinsing time. In addition, we show that the anions of the cage can influence the sensitivity and quality of the patterning, probably through their effect on physical properties of the materials.

  5. Manufacturing of glass from tin mining tailings in Bolivia

    International Nuclear Information System (INIS)

    Arancibia, J. r. H.; Alfonso, P.; Garcia-Valles, M.; Martinez, S.; Parcerisa, D.; Canet, C.; Romero, F. M.

    2013-01-01

    Tailings from mining activities in Bolivia represent an environmental problem. In the vicinity of the tin mines of Llallagua, Potosi department, there are large dumps and tailings. We present a study of the use of these wastes as raw materials for the manufacture of glass. This procedure aims to contribute to environmental remediation of mining areas through the vitrification, a process which offers an alternative for stabilization of hazardous waste. In addition, the marketing of the obtained product would provide an additional income to the mining areas. For this study three samples of mining waste, with grain size between sand and silt, were used. The chemical composition of these raw materials, determined by X-ray fluorescence, is granitic, with high contents of heavy metals. On the basis of its composition, glass were made from silica glass by adding CaCO 3 and Na 2 CO 3 . The thermal cycle has been determined from TDA. Tg values of glass range from 626 degree centigrade to 709 degree centigrade. Leaching tests of the obtained glasses confirm their capacity to retain heavy metals. (Author)

  6. Indoor guided evacuation: TIN for graph generation and crowd evacuation

    Directory of Open Access Journals (Sweden)

    Mengchao Xu

    2016-05-01

    Full Text Available This paper presents two complementary methods: an approach to compute a network data-set for indoor space of a building by using its two-dimensional (2D floor plans and limited semantic information, combined with an optimal crowd evacuation method. The approach includes three steps: (1 generate critical points in the space, (2 connect neighbour points to build up the network, and then (3 run the optimal algorithm for optimal crowd evacuation from a room to the exit gates of the building. Triangulated Irregular Network (TIN is used in the first two steps. The optimal evacuation crowd is not based on the nearest evacuation gate for a person but relies on optimal sorting of the waiting lists at each gate of the room to be evacuated. As an example case, a rectangular room with 52 persons with two gates is evacuated in 102 elementary interval times (one interval corresponds to the time for one step for normal velocity walking, whereas it would have been evacuated in not less than 167 elementary steps. The procedure for generating the customized network involves the use of 2D floor plans of a building and some common Geographic Information System (GIS functions. This method combined with the optimal sorting lists will be helpful for guiding crowd evacuation during any emergency.

  7. Scintigraphic study of gastric emptying with colloidal tin

    International Nuclear Information System (INIS)

    Rodríguez Paleo, Lester; Nuez Vilar, Maricela; Machado Lois, Marisel; López González, María Karla; Torres Leyva, Oscar; Izquierdo Izquierdo, Yimel; García González, Idelsy; Conesa Gonzalez, Ana Ibis

    2016-01-01

    Gastroparesis is defined as a delay in gastric emptying in the absence of mechanical obstruction, associated with symptoms such as nausea and / or vomiting, feeling of postprandial gastric fullness, early satiety or epigastric pain for more than 3 months. The gold standard in the diagnosis of delayed gastric emptying scintigraphy is gastric emptying and radiopharmaceutical has been used more 99m Tc-sulfur colloid not available in the country. In order to evaluate the usefulness of colloidal tin in the scintigraphic gastric emptying study, a descriptive study was conducted in 64 patients over 18 years using as radiopharmaceutical 99m Tc-Sn colloid. 31% of patients had symptoms. The emptying time was normal in 50 cases and the association of gastroparesis symptoms was observed in 20 (15 diabetic and 5 non-diabetic), 9 patients had a delayed emptying, but reported no symptoms. Gastroparesis was more frequent in women than in men (35% versus 21%). 21% of patients had a moderate delayed gastric emptying. Conclusions: The results obtained with 99m Tc-Sn colloid are comparable to those reported by other authors using 99m Tc-SC in the scintigraphic assessment of gastric emptying. (author)

  8. Spray Pyrolyzed Polycrystalline Tin Oxide Thin Film as Hydrogen Sensor

    Directory of Open Access Journals (Sweden)

    Ganesh E. Patil

    2010-09-01

    Full Text Available Polycrystalline tin oxide (SnO2 thin film was prepared by using simple and inexpensive spray pyrolysis technique (SPT. The film was characterized for their phase and morphology by X-ray diffraction (XRD and scanning electron microscopy (SEM, respectively. The crystallite size calculated from the XRD pattern is 84 nm. Conductance responses of the polycrystalline SnO2 were measured towards gases like hydrogen (H2, liquefied petroleum gas (LPG, ethanol vapors (C2H5OH, NH3, CO, CO2, Cl2 and O2. The gas sensing characteristics were obtained by measuring the sensor response as a function of various controlling factors like operating temperature, operating voltages (1 V, 5 V, 10 V 15 V, 20 V and 25 V and concentration of gases. The sensor response measurement showed that the SnO2 has maximum response to hydrogen. Furthermore; the SnO2 based sensor exhibited fast response and good recovery towards hydrogen at temperature 150 oC. The result of response towards H2 reveals that SnO2 thin film prepared by SPT would be a suitable material for the fabrication of the hydrogen sensor.

  9. Samarium (III Selective Membrane Sensor Based on Tin (IV Boratophosphate

    Directory of Open Access Journals (Sweden)

    Ashok S. K. Kumar

    2004-08-01

    Full Text Available Abstract: A number of Sm (III selective membranes of varying compositions using tin (IV boratophosphate as electroactive material were prepared. Polyvinyl chloride, polystyrene and epoxy resin were used as binding materials. Membrane having composition of 40% exchanger and 60% epoxy resin exhibited best performance. This membrane worked well over a wide concentration range of 1x10-5M to 1x10-1 M of samarium ions with a Super-Nernstian slope of 40 mV/decade. It has a fast response time of less than 10 seconds and can be used for at least six months without any considerable divergence in potentials. The proposed sensor revealed good selectivities with respect to alkali, alkaline earth, some transition and rare earth metal ions and can be used in the pH range of 4.0-10.0. It was used as an indicator electrode in the potentiometric titration of Sm (III ions against EDTA. Effect of internal solution was studied and the electrode was successfully used in non-aqueous media, too.

  10. Synthesis and magnetic properties of tin spinel ferrites doped manganese

    Science.gov (United States)

    El Moussaoui, H.; Mahfoud, T.; Habouti, S.; El Maalam, K.; Ben Ali, M.; Hamedoun, M.; Mounkachi, O.; Masrour, R.; Hlil, E. K.; Benyoussef, A.

    2016-05-01

    In this work we report the synthesis, the microstructural characterization and the magnetic properties of tin spinel ferrites doped manganese (Sn1-xMnxFe2O4 with x=0.25, 0.5, 0.75, and 1) nanoparticles prepared by co-precipitation method. The effect of annealing temperature on the structure, morphology and magnetic properties of Sn0.5Mn0.5Fe2O4 has been investigated. The synthesized nanoparticle sizes have been controlled between 4 and 9 nm, with uniform spherical morphology as confirmed by transmission electron microscopy (TEM). All the samples prepared possess single domain magnetic. The nanoparticles of Sn0.5Mn0.5Fe2O4 with 4 nm in diameter have a blocking temperature close to 100 K. In addition, the cation distribution obtained from the X-ray diffraction of this sample was confirmed by magnetic measurement. For the Sn1-xMnxFe2O4; (0≤x≤1) samples, the magnetization and coercive fields increase when the augmentation of Mn content increases. For x=0.5, such parameters decrease when the calcination temperature increases.

  11. Highly efficient and durable TiN nanofiber electrocatalyst supports.

    Science.gov (United States)

    Kim, Hyun; Cho, Min Kyung; Kwon, Jeong An; Jeong, Yeon Hun; Lee, Kyung Jin; Kim, Na Young; Kim, Min Jung; Yoo, Sung Jong; Jang, Jong Hyun; Kim, Hyoung-Juhn; Nam, Suk Woo; Lim, Dong-Hee; Cho, EunAe; Lee, Kwan-Young; Kim, Jin Young

    2015-11-28

    To date, carbon-based materials including various carbon nanostructured materials have been extensively used as an electrocatalyst support for proton exchange membrane fuel cell (PEMFC) applications due to their practical nature. However, carbon dissolution or corrosion caused by high electrode potential in the presence of O2 and/or water has been identified as one of the main failure modes for the device operation. Here, we report the first TiN nanofiber (TNF)-based nonwoven structured materials to be constructed via electrospinning and subsequent two-step thermal treatment processes as a support for the PEMFC catalyst. Pt catalyst nanoparticles (NPs) deposited on the TNFs (Pt/TNFs) were electrochemically characterized with respect to oxygen reduction reaction (ORR) activity and durability in an acidic medium. From the electrochemical tests, the TNF-supported Pt catalyst was better and more stable in terms of its catalytic performance compared to a commercially available carbon-supported Pt catalyst. For example, the initial oxygen reduction performance was comparable for both cases, while the Pt/TNF showed much higher durability from an accelerated degradation test (ADT) configuration. It is understood that the improved catalytic roles of TNFs on the supported Pt NPs for ORR are due to the high electrical conductivity arising from the extended connectivity, high inertness to the electrochemical environment and strong catalyst-support interactions.

  12. Contribution to the aluminum-tin-zinc ternary system

    Science.gov (United States)

    Drápala, J.; Kostiuková, G.; Losertová, M.

    2017-11-01

    The Sn-Zn-Al alloys are one of significant candidates in the proposal of alternative lead-free solders for higher temperature soldering. This paper deals with the study of the aluminum-tin-zinc system. Twenty Sn-Zn-Al alloys together with six binary Sn-Zn alloys were prepared and studied experimentally. Alloys were prepared from pure Sn, Zn and Al (melting and cooling in a vacuum resistance furnace). The specimens were studied metallographically including the micro-hardness measurements, complete chemical analysis (ICP-AES, OES), X-ray micro-analysis of alloys by SEM and EDX in order to determine the composition and identification of individual phases. Significant temperatures and enthalpies of phase transformations were determined by DTA. After long-term annealing of selected alloys in vacuum followed by quenching the structural and chemical microanalyses of the present phases and their limit concentrations were carried out. The achieved results were compared with the thermodynamic modelling of the ternary Sn-Zn-Al system (computer programs THERMOCALC, MTDATA, PANDAT and databases CALPHAD, COST). Electrical resistivity, density, magnetic susceptibility and wettability of Sn-Zn-Al solders were measured as well.

  13. TiN coating on steel by pulsed capillary discharge

    International Nuclear Information System (INIS)

    Avaria, G; Favre, M; Bhuyan, H; Wyndham, E; Kelly, H; Grondona, D; Marquez, A

    2006-01-01

    The characteristic geometry of a pulsed capillary discharge (PCD)[1] establishes natural conditions for the formation of plasma jets, which expand in the chamber's neutral gas. A locally stored capacitor, coaxial with the capillary, is pulse charged to a maximum of -10kV, giving a current pulse of ∼10ns, ∼2kA. The discharge is operated in nitrogen, in a continuous pulsing mode, at a frequency of 50 Hz and pressures of 0.3 to 1 Torr. The coating produced by these plasma jets on substrates of AISI 304 stainless steel have been studied. The chamber's anode is made of titanium, which interacts with the nitrogen plasma producing TiN coatings on the substrates. The results are presented for the plasma characterization at different discharge pressures and times, as well as SEM, EDS and AFM analysis of deposits made. This characterization was carried out using Langmuir double probes, which provide data on the electronic temperature and density in the plasma jet. At the same time spectrographic studies of the plasma were carried out, and the presence of ionized atoms of titanium and nitrogen were observed. An inverse relation between the pressure of nitrogen present in the chamber and the thickness of the coating over steel was found, as well as a direct relationship between the temperature and plasma densities with the thickness of the deposit (CW)

  14. Novel phases and superconductivity of tin sulfide compounds

    Science.gov (United States)

    Gonzalez, Joseph M.; Nguyen-Cong, Kien; Steele, Brad A.; Oleynik, Ivan I.

    2018-05-01

    Tin sulfides, SnxSy, are an important class of materials that are actively investigated as novel photovoltaic and water splitting materials. A first-principles evolutionary crystal structure search is performed with the goal of constructing the complete phase diagram of SnxSy and discovering new phases as well as new compounds of varying stoichiometry at ambient conditions and pressures up to 100 GPa. The ambient phase of SnS2 with P 3 ¯ m 1 symmetry remains stable up to 28 GPa. Another ambient phase, SnS, experiences a series of phase transformations including α-SnS to β-SnS at 9 GPa, followed by β-SnS to γ-SnS at 40 GPa. γ-SnS is a new high-pressure metallic phase with P m 3 ¯ m space group symmetry stable up to 100 GPa, which becomes a superconductor with a maximum Tc = 9.74 K at 40 GPa. Another new metallic compound, Sn3S4 with I 4 ¯ 3 d space group symmetry, is predicted to be stable at pressures above 15 GPa, which also becomes a superconductor with relatively high Tc = 21.9 K at 30 GPa.

  15. Etching of germanium-tin using ammonia peroxide mixture

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Yuan; Ong, Bin Leong; Wang, Wei; Gong, Xiao; Liang, Gengchiau; Yeo, Yee-Chia, E-mail: yeo@ieee.org [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Zhang, Zheng; Pan, Jisheng [Institute of Material Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, #08-03, Innovis, Singapore 138634 (Singapore); Tok, Eng-Soon [Department of Physics, National University of Singapore, Singapore 117551 (Singapore)

    2015-12-28

    The wet etching of germanium-tin (Ge{sub 1-x}Sn{sub x}) alloys (4.2% < x < 16.0%) in ammonia peroxide mixture (APM) is investigated. Empirical fitting of the data points indicates that the etch depth of Ge{sub 1-x}Sn{sub x} is proportional to the square root of the etch time t and decreases exponentially with increasing x for a given t. In addition, X-ray photoelectron spectroscopy results show that increasing t increases the intensity of the Sn oxide peak, whereas no obvious change is observed for the Ge oxide peak. This indicates that an accumulation of Sn oxide on the Ge{sub 1-x}Sn{sub x} surface decreases the amount of Ge atoms exposed to the etchant, which accounts for the decrease in etch rate with increasing etch time. Atomic force microscopy was used to examine the surface morphologies of the Ge{sub 0.918}Sn{sub 0.082} samples. Both root-mean-square roughness and undulation periods of the Ge{sub 1-x}Sn{sub x} surface were observed to increase with increasing t. This work provides further understanding of the wet etching of Ge{sub 1-x}Sn{sub x} using APM and may be used for the fabrication of Ge{sub 1-x}Sn{sub x}-based electronic and photonic devices.

  16. Tin Whisker Growth and Mitigation with a Nanocrysytalline Nickel Coating

    Science.gov (United States)

    Janiuk, Szymon

    Tin whiskers are a problem in the electronics industry since the EU banned the use of lead in Pb-Sn solders as part of the Restriction of Hazardous Substances (RoHS). The biggest concern with Sn whiskers is their ability to short-circuit electronics. High reliability applications such as the aerospace, defense, healthcare, and automotive industries are at most risk. This project explores Sn whisker mitigation and prevention with the use of nanocrystalline nickel coating over Sn surfaces. Sn was plated onto a pure Cu substrate using electroplating. A high temperature and high humidity condition, at 85°C and 85% RH, was effective at growing whiskers. A nNi coating was plated over Sn/Cu coupons. After subjecting the nNi/ Sn/Cu samples through 85°C/85% RH testing conditions, no whiskers were observed penetrating the surface. These results make nNi a viable material to use as a coating to prevent the growth of Sn whiskers in electronic assemblies.

  17. Search for technetium in natural tin metallurgical residues

    Energy Technology Data Exchange (ETDEWEB)

    Parker, C.W.

    1996-07-01

    Possible instability of baryons inside the nuclei might result in accumulation of rare isotopes in natural ores. In this respect, isotopes of technetium have certain advantages that can be useful in the search for technetium in nonradioactive ores by chemical methods. In this paper, we review the history of technetium research and discuss a new approach to the search for natural technetium associated with tin ores which appears to offer a rare possibility of discovering a smelting operation by-product such as flue dust, in which the volatile technetium heptoxide (Tc{sub 2}O{sub 7}), like rhenium heptoxide (Re{sub 2}O{sub 7}), would be expected to concentrate. Our concept of a search for technetium in these materials would be based on the assumption that traces of rhenium could occur in the ore and could be traced most easily by neutron activation of small samples. Such a procedure would confirm that an enrichment from the ore to the flue dust actually occurs with the rhenium and therefore should occur with technetium. Furthermore, this occurrence should identify the best location to search for technetium.

  18. The acidic properties of mixed tin and antimony oxide catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Irving, E.A.; Taylor, D.

    1978-01-01

    The acidic properties of mixed tin + antimony oxide catalysts were studied in the isomerization of 3,3-dimethyl-1-butene, cyclopropane, 1-butene, and cis-2-butene and the dehydration of isopropanol over the mixed oxides outgassed at room temperature and 698/sup 0/K. Only the zero-order portions of the reaction were used for calculations. With catalysts outgassed at room temperature, weakly acidic sites were present, and all the reactions probably occurred by a carbonium ion mechanism with Broensted acid sites as a source of protons. The rates increased with increasing antimony content to a maximum at approx. 50 at. % and then decreased with further increase in the antimony content. Outgassing of the catalysts at 698/sup 0/K increased the isomerization rate of 3,3-dimethyl-1-butene, but decreased those for cyclopropane and isopropanol due to poisoning by the propylene produced. For 1-butene and cis-2-butene and catalysts outgassed at 698/sup 0/K, only catalysts with less than 50Vertical Bar3< antimony were active. The catalysts were poisoned by treatment with bases or with sodium acetate. A proposed correlation between rates and acidity led to the conclusion that the catalyst composition corresponding to maximum acidity differs from that for maximum selective oxidation activity. Graphs and 10 references.

  19. 188Re radiopharmaceuticals for radiosynovectomy: evaluation and comparison of tin colloid, hydroxyapatite and tin-ferric hydroxide macroaggregates

    International Nuclear Information System (INIS)

    Savio, Eduardo; Ures, María Cristina; Zeledón, Patricia; Trindade, Victoria; Paolino, Andrea; Mockford, Virginia; Malanga, Antonio; Fernández, Marcelo; Gaudiano, Javier

    2004-01-01

    Radiosynovectomy is a therapy used to relieve pain and inflammation from rheumatoid arthritis and related diseases. In this study three 188 Re particulate compounds were characterized according to their physico-chemical properties and their biological behavior in rabbits. The results were compared in order to establish which was the radiopharmaceutical that better fits the requirements of this kind of radiotherapy. Three radiopharmaceutical formulations, tin colloid, hydroxyapatite particles (HA) and ferric hydroxide macroaggregates coated with tin colloid (FHMA), were physically characterized (number, volume and surface of the particles). For this purpose laser diffraction methodology was used. To evaluate cavity leakage of activity the following studies in New Zealand rabbits were performed: scintigraphic images for 48 hr after intraarticular injection of each radiopharmaceutical, biodistribution at 48 hr and urine samples collection during the first 24 hr post-radiopharmaceutical administration. Labeling procedures for 188 Re-HA and 188 Re-Sn-FHMA were labour intensive while 188 Re-Sn was easily prepared. Furthermore, 188 Re-Sn colloid offered the greatest surface area in the 2–10 microm range and was obtained with a radiochemical purity over 95%, while percentage of bound activity for 188 Re-HA and 188 Re-Sn-FHMA were 55% and 92% respectively. Stability was verified for the three radiopharmaceuticals for 24 hr. Scintigraphic studies and biodistribution in rabbits after intraarticular administration of the radiopharmaceuticals showed relevant activity only in the knee, this being over 90% of the residual activity in the whole body at 48 hr in every case. Renal elimination of 188 Re-Sn colloid and 188 Re-Sn-FHMA was detected by activity measurements in urine samples, during the first 12 hr post-radiopharmaceutical injection. The percentage of activity retained in the knee was 69.1% for 188 Re-Sn colloid, 55.1% for 188 Re-Sn-FHMA and 33.6% for 188 Re-HA. The 188

  20. Calibration of filters for detection of airborne I-131 in the environment of nuclear power plant; Kalibracija filtrov za detekcijo I-131 v zraku okolja jedrske elektrarne

    Energy Technology Data Exchange (ETDEWEB)

    Zupan, M; Miklavzic, U; Pucelj, B [Institut Jozef Stefan, Ljubljana (Yugoslavia)

    1982-07-01

    A simple and clean method for efficiency calibration of filters for collection of airborne I and corresponding Ge(Li) spectrometer is described. As the calibrated source of gaseous I-131 the radiopharmaceutical water solution of NaI is used. As calibration example the absolute activity distribution of I-131 measured in a charcoal filter is shown. (author)

  1. XPS investigations of tribolayers formed on TiN and (Ti,Re)N coatings

    Energy Technology Data Exchange (ETDEWEB)

    Oktay, Serkan; Kahraman, Zafer; Urgen, Mustafa; Kazmanli, Kursat, E-mail: kursat@itu.edu.tr

    2015-02-15

    Graphical abstract: - Highlights: • The (Ti,Re)N coating (8 ± 1.9 at.% Re) consisted of TiN and ReNx (x > 1.33) phases. • TiO{sub 2} provided low friction coefficient to TiN coating at 150 °C. • Re addition to TiN drastically dropped the friction coefficients to 0.17–0.22. • Re{sub 2}O{sub 7} provided very low friction coefficient to (Ti,Re)N coating. • Re addition to TiN improved the wear behavior. - Abstract: TiN and (Ti,Re)N coatings were deposited on high-speed-steel substrates by a hybrid coating system composed of cathodic arc PVD and magnetron sputtering techniques. In order to keep rhenium content low (8 ± 1.9 at.%) in the coating, magnetron sputtering technique was utilized to evaporate rhenium. The (Ti,Re)N coating consisted of TiN and ReN{sub x} (x > 1.33) phases. The hardness of TiN and (Ti,Re)N were 31 GPa and 29 GPa ( ± 2 GPa), respectively. Tribological behaviors of the samples were tested against Al{sub 2}O{sub 3} balls at 21 °C (RT) and 150 °C (HT) by reciprocating wear technique. The tribolayers were analyzed by XPS technique. Friction coefficients of TiN were 0.56, 0.35 for 21 °C and 150 °C tests, respectively. Rhenium addition to TiN drastically dropped the friction coefficients to 0.22 and 0.17 for RT and HT samples. Rhenium addition also improved the wear resistance of the coating at both test temperatures. For TiN, main oxide component of the tribolayers was Ti{sub 2}O{sub 3} for RT tests and TiO{sub 2} for HT tests. The oxide layer formed on (Ti,Re)N were the mixture of TiO{sub 2}, Ti−O−N, ReO{sub 2} and Re{sub 2}O{sub 7} for both test temperatures. Re{sub 2}O{sub 7} provided very low friction coefficient to (Ti,Re)N. The findings are consistent with the crystal chemistry approach.

  2. [Prevention of recurrent amiodarone-induced hyperthyroidism by iodine-131].

    Science.gov (United States)

    Hermida, J S; Jarry, G; Tcheng, E; Moullart, V; Arlot, S; Rey, J L; Schvartz, C

    2004-03-01

    Amioradone-induced hyperthyroidism is a common complication of amiodarone therapy. Although definitive interruption of amiodarone is recommended because of the risks of aggravation of the arrhythmias, some patients may require the reintroduction of amiodarone several months after normalisation of thyroid function. The authors undertook a retrospective study of the effects of preventive treatment of recurrences of amiodarone-induced hyperthyroidism with I131. The indication of amiodarone therapy was recurrent, symptomatic, paroxysmal atrial fibrillation in 13 cases and ventricular tachycardia in 5 cases (M = 14, average age 64 +/- 13 years). The underlying cardiac disease was dilated cardiomyopathy (N = 5), ischaemic heart disease (N = 3), hypertensive heart disease (N = 2), arrhythmogenic right ventricular dysplasia (N = 2) or valvular heart disease (N = 2). Two patients had idiopathic atrial fibrillation. An average dose of 576 +/- 184 MBq of I131 was administered 34 +/- 37 months after an episode of amiodarone-induced hyperthyroidism. Amiodarone was reintroduced in 16 of the 18 patients after a treatment-free period of 98 +/- 262 days. Transient post-radioiodine hyperthyroidism was observed in 3 cases (17%). Sixteen patients (89%) developed hypothyroidism requiring replacement therapy with L-thyroxine. There were no recurrences of amiodarone-induced hyperthyroidism. After 24 +/- 17 months follow-up, the arrhythmias were controlled in 13 of the 16 patients (81%) who underwent the whole treatment sequence. The authors conclude that preventive treatment with I131 is an effective alternative to prevent recurrence of amiodarone-induced hyperthyroidism in patients requiring reintroduction of amiodarone to control their arrhythmias.

  3. Single dose planning for radioiodine-131 therapy of Graves' disease

    International Nuclear Information System (INIS)

    Kita, Tamotsu; Yokoyama, Kunihiko; Kinuya, Seigo; Taki, Junichi; Michigishi, Takatoshi; Tonami, Norihisa

    2004-01-01

    Patients with Graves' disease were studied one year after radioiodine-131 therapy to assess the relationship between the effectiveness of the therapy and the radioiodine doses used. Patients were classified into three groups according to thyroid function as hyperthyroidism, euthyroidism and hypothyroidism at one year after I-131 therapy. In these groups we compared the mean values of dose, dose per thyroid weight calculated with I-123 uptake before the therapy (pre D/W), dose per thyroid weight calculated with therapeutic I-131 uptake (post D/W), and absorbed dose. No significant differences were found between the three groups in terms of dose or pre D/W. The mean values of post D/W and absorbed dose in the non-hyperthyroid (euthyroid and hypothyroid) group were significantly greater than those in the hyperthyroid group. Post D/W of 6.3 MBq/g was a threshold separating the non-hyperthyroid group from the hyperthyroid group. There was no correlation between pre D/W and post D/W; however, the mean post D/W was significantly greater than the mean pre D/W. All patients with pre D/W above 6.3 MBq/g showed non-hyperthyroidism at one year after the radioiodine treatment. No indicators before the radioiodine therapy had significant relationships with the effectiveness of the therapy at one year after the treatment. However, the single therapy planned for setting the pre D/W above 6.3 MBq/g will certainly make the patients non-hyperthyroid. As this proposal of dose planning is based on a small number of patients, further study is needed. (author)

  4. Iodine-131 therapy for the treatment of multinodular goitre

    International Nuclear Information System (INIS)

    Akerman, R.L.; Howarth, D.M.

    1997-01-01

    Full text: The purpose of this study was to investigate the effectiveness of 131 l therapy for toxic and non-toxic multinodular goitre (MNG)in the patients treated with the standard dose of 4 x 555 MBq (total 2.2 Bq) and therefore give some indication as to the adequacy of this therapy. This was a retrospective study using information from patients' notes. All patients with large multinodular goitres who had radioiodine therapy for treatment of MNG since 1991 were selected. Data obtained included age, gender, pre, peri and post therapy symptoms and serial biochemical thyroid function results. Each patient was followed for a minimum of six months. The subjects were 35 patients (32 female, three male) with an age range of 37 - 87 years. 26 patients had non-toxic MNG, nine patients had toxic MNG, 24 patients had retrosternal or obstructive symptoms and five patients had had previous thyroid therapy. The patients with retrosternal or obstructive symptoms experienced a reduction in those symptoms. 8.6 per cent of the patients experienced no change at all in symptoms. 2.8 per cent of the patients experienced non-transient side effects (sore throat). 32.8 per cent of the patients experienced transient hyperthyroidism during 131 I therapy. In the toxic group, 77.8 per cent became euthyroid. 11.1 per cent became hypothyroid and 11.1 per cent remained hyperthyroid and required additional treatment. In the non-toxic group, 42.3 per cent became hypothyroid and 57.7 per cent remained euthyroid. The overall incidence of hypothyoidism was 34.4 per cent. The results of this study suggests 131 l therapy in the form of 4 x 555 MBq oral doses (one dose per month for four months) is effective, efficient, relatively risk-free, easy and generally well-tolerated treatment for toxic and non-toxic multinodular goitre

  5. Iodine-131 therapy for the treatment of multinodular goitre

    Energy Technology Data Exchange (ETDEWEB)

    Akerman, R.L.; Howarth, D.M. [John Hunter Hospital, Newcastle, NSW, (Australia). Department of Nuclear Medicine

    1997-09-01

    Full text: The purpose of this study was to investigate the effectiveness of {sup 131}l therapy for toxic and non-toxic multinodular goitre (MNG)in the patients treated with the standard dose of 4 x 555 MBq (total 2.2 Bq) and therefore give some indication as to the adequacy of this therapy. This was a retrospective study using information from patients` notes. All patients with large multinodular goitres who had radioiodine therapy for treatment of MNG since 1991 were selected. Data obtained included age, gender, pre, peri and post therapy symptoms and serial biochemical thyroid function results. Each patient was followed for a minimum of six months. The subjects were 35 patients (32 female, three male) with an age range of 37 - 87 years. 26 patients had non-toxic MNG, nine patients had toxic MNG, 24 patients had retrosternal or obstructive symptoms and five patients had had previous thyroid therapy. The patients with retrosternal or obstructive symptoms experienced a reduction in those symptoms. 8.6 per cent of the patients experienced no change at all in symptoms. 2.8 per cent of the patients experienced non-transient side effects (sore throat). 32.8 per cent of the patients experienced transient hyperthyroidism during {sup 131}I therapy. In the toxic group, 77.8 per cent became euthyroid. 11.1 per cent became hypothyroid and 11.1 per cent remained hyperthyroid and required additional treatment. In the non-toxic group, 42.3 per cent became hypothyroid and 57.7 per cent remained euthyroid. The overall incidence of hypothyoidism was 34.4 per cent. The results of this study suggests {sup 131}l therapy in the form of 4 x 555 MBq oral doses (one dose per month for four months) is effective, efficient, relatively risk-free, easy and generally well-tolerated treatment for toxic and non-toxic multinodular goitre.

  6. Tin in canned food: a review and understanding of occurrence and effect.

    Science.gov (United States)

    Blunden, Steve; Wallace, Tony

    2003-12-01

    Tinplate is light gauge, steel sheet or strip, coated on both sides with commercially pure tin and has been used for well over a hundred years as a robust form of food packaging. Altogether, about 25,000 million food cans are produced and filled in Europe per annum, about 20% of these having plain internal (unlacquered) tin-coated steel bodies. Worldwide, the total for food packaging is approximately 80,000 million cans. Tinplate is also extensively used for the production of beverage cans. Europe produces and fills over 15,000 million tinplate beverage cans per annum all of which are internally lacquered. The use of tinplate for food and beverage packaging, will result in some tin dissolving into the food content, particularly when plain uncoated internal surfaces are used. The Provisional Tolerable Weekly Intake for tin is 14 mg/kg body weight and recommended maximum permissible levels of tin in food are typically 250 mg/kg (200 mg/kg UK) for solid foods and 150 mg/kg for beverages. However, the question arises as to whether evidence exists that such elevated levels of tin in food in any way constitute a risk to human health. This review considers the factors affecting the dissolution of tin, the reported measurements/surveys of actual levels of tin in canned foods and the studies and reports of acute (short term) toxicity relating to the ingestion of elevated levels of tin in food products. Chronic studies are mentioned, but are not covered in detail, since the review is mainly concerned with possible effects from the ingestion of single high doses. From published data, there appears to be a small amount of evidence suggesting that consumption of food or beverages containing tin at concentrations at or below 200 ppm has caused adverse gastrointestinal effects in an unknown but possibly small proportion of those exposed. However, the evidence supporting this assertion is derived from reports of adverse effects which offer data that are limited, incomplete or of

  7. Preparation of 131I-asialo-α1-acid glycoprotein

    International Nuclear Information System (INIS)

    Rijk, P.P. van

    1975-01-01

    α 1 -Acid glycoprotein (orosomucoid) was prepared from a byproduct of the ethanol plasma fractionation by means of ion-exchange procedures. Immunoelectrophoresis suggested a high degree of purity; the purified protein contained 13.5% sialic acid and 17.8% hexose. The α 1 -acid glycoprotein was modified by removal of sialic acid with neurominidase (E.C. 3.2.1.18) followed by iodination with 131 I. The purpose of the preparation, its potential use as a pharmacon for liver-function studies in nuclear medicine, is the subject of further study

  8. Treatment of hyperthyroidism: use of 131I and 125I

    International Nuclear Information System (INIS)

    Atkins, H.L.

    1977-01-01

    Factors related to late hypothyroidism following the use of 131 I for treatment of hyperthyroidism are discussed with regard to age of patient, size of dose, previous surgery, immune status, and others. Possible reasons for the post-therapeutic hypothyroidism are discussed with regard to effects of radiation on the reproductive capacity of thyroid cells, effects of radiation on blood vessels, and dose distribution of radioiodine. The following therapeutic strategies are discussed: reduction of initial dose; multiple small doses; high dose radioiodine followed by replacement therapy; the use of external beam irradiation; and the use of 125 I

  9. Effects of oral contraceptives on thyroid tests using 131I

    International Nuclear Information System (INIS)

    Carvalho, N.; Silva, W.N. da; Papaleo Netto, M.

    1973-01-01

    The effect of oral contraceptives on 131 I uptake, the depuration rate of this isotope and the PBI was studied in 24 euthyroid female patients. The dose administered was of 2.5 mg of norestinodrel and 0.05 mg of ethynil estradiol. The data were submitted to a statistical study applying analysis of variance, comparison of the means, determination of the standard deviations and the confidence interval. It is concluded that drug does affect thyroid function and that these effects may cause certain disturbances, as arterial hypertension, thrombosis, etc., in patients under prolonged contraceptive treatment [pt

  10. Treatments with radioactive iodine, 131 I. How, when and where?

    International Nuclear Information System (INIS)

    Ruiz J, A.; Gonzalez T, O.

    2006-01-01

    A great variety of approaches exists in the application of the treatments with radioactive materials, as the 131 I, but it is necessary to standardize them for the patient's benefit, because their doctor doesn't always know the principle that it bases this therapy, called metabolic therapy or radioiodine therapy (RYT). In this work the experience that was acquired by more of 50 years of RYT management in the Thyroid and Nuclear Medicine Clinic in patients with thyroid pathologies is informed, so that their management fulfills its function and it was carried out inside the corresponding juridical frame and the physicochemical and endocrinological principles that should take implicit. (Author)

  11. Distribution of 131 I- labeled Bothrops erythromelas venom in mice

    International Nuclear Information System (INIS)

    Vasconcelos, C.M.L.; Valenca, R.C.; Araujo, E.A.; Modesto, J.C.A.; Pontes, M.M.; Guarnieri, M.C.; Brazil, T.K.

    1998-01-01

    Bothrops erythromelas is responsible for many snake bites in northeastern Brazil. In the present study we determined the in vivo distribution of the venom following its subcutaneous injection into mice. B. erythromelas venom and albumin were labeled individually with 131 I by the chloramine T method, and separated in a Sephacryl S-200 column. The efficiency of labeling was 68%.Male Swiss mice (40-45 g), which had been provided with drinking water containing 0.05% KI over a period of 10 days prior to the experiment, were inoculated dorsally (sc) with 0.3 ml (2.35 x 10 5 cpm/mouse) of 131 I-venom (N = 42), 131 -albumin or 131 I (controls, N = 28 each). Thirty minutes and 1,3, 6, 12, 18 and 24 h after inoculation, the animals were perfused with 0.85% Na Cl and skin and various organs were collected in order to determine radioactivity content. There was a high rate of venom absorption int he skin (51%) within the first 30 min compared to albumin (20.1%) and free iodine (8.2%). Up to the third hour after injection there was a tendency for venom and albumin to concentrate in the stomach ( 3 rd h),small intestine (3 rd h) and large intestine (6th h). Both control groups had more radioactivity in the digestive tract, especially in the stomach, but these levels decreased essentially to baseline by 12-18 h postinjection. In the kidneys, the distribution profiles of venom, albumin and iodine were similar. Counts at 30 min postinjection were low in all three groups (1.37, 1.86 and 0.77, respectively), and diminished to essentially 0% by 12-18 h. Albumin tended to concentrate in muscle until the 3 rd h postinjection (1.98%).There was a low binding of labeled venom in the liver (B. erythromelas venom does not specifically target most internal organs. That is, the systemic effects of envenomation ar mainly due to an indirect action. (author)

  12. Dosimetry prior to I-131-therapy of benign thyroid disease

    International Nuclear Information System (INIS)

    Haenscheid, Heribert; Lassmann, Michael; Reiners, Christoph

    2011-01-01

    The activity to be administered in I-131 therapy of benign thyroid disease is determined by the radiation absorbed dose necessary to cure the disease, the target mass, and the residence time of the I-131 in the target volume. Data from 73 patients with complete sets of uptake measurements 2, 6, 24, 48, and 96 (n = 53) or 120 (n = 20) hours after oral administration of 1 MBq I-131 were used to deduce residence times from subsets of 3, 2, or only 1 measurement for each individual. The values were compared to those obtained with the reference method, i.e. a fit of an uptake function based on a 2-compartment model to all 5 measurements, to quantify the errors introduced by the less demanding assessments. Deviations are less than 10% if the 2- compartment uptake function is fitted to only 3 values measured after 6, 24, and 96-120 h. Use of 2, 24, and 96-120 h data results in errors > 20% in individual patients. The effective half-lives as determined from 2 measurements after 24 and 96-120 h correlate well with those deduced from the reference method with larger deviations in individuals with slow iodine kinetics and late maximal uptake. Residence times determined from the 24 h uptake, assuming linear increase during the first day, and the effective half-life limited to maximum 8 days underestimate the actual values systematically in patients with long and short half-lives. These errors can be eliminated by a modification of the calculation method resulting in deviations less than 14% in all but one individual for this procedure. The accuracy of methods based on only one retention value increases with the time of measurement after the administration of I-131. While systematic errors up to a factor of two occur if the 24 h uptake is used for the estimate, deviations are less than 18% for measurements after 120 h. The results suggest that only one late uptake assessment warrants residence time estimates with an acceptable error. Given the high inherent uncertainties in the

  13. Treatment of hyperthyroidism with fixed dose form Iodine 131

    International Nuclear Information System (INIS)

    Pacheco Torres, P.; Cerquera, A.M.; Acosta, F.; Sierra, M.

    2007-01-01

    Full text: Objective: Evaluation of the response to therapy with fixed dose of Iodine-131 in patients with hyperthyroidism. One hundred seventeen patients with hyperthyroidism were tested and sent for treatment with Iodine-131. The dose of the therapy was calculated according to the pathology (Diffuser goiter (DG): Multinodular goiter (MNG) and Single toxic nodule (NST). Values of TSH confirmed hyperthyroidism by laboratory methods. The thyroid-blocking agents were discontinued: methimazole for five days and propylthiouracil two days prior to therapy. The pregnancy tests were routinely conducted in females of reproductive age group. Patients reported fasting for therapy. The doses were administered in capsule form after obtaining informed consent from the patients. The patients were normally instructed to eat only after two hours after administration of iodine to promote gastric absorption of the radionuclide. Normally a post therapy thyroid scan is performed four days after treatment. Patients are usually followed up by the endocrinologists. A three- month post therapy evaluation is done by the nuclear medicine physician by telephone. The demographic data of our patients treated are as follows: Total number of patients: 117 Female: 88 (75.21%) Male: 29 (24.79%) Age average: 45 years. Diffuse Goiter= 94 (80.34%), Multinodular Goiter= 17 (14.52%) and Toxic Adenoma (NST) = 6 (5.12%). The average administered dose was 22.5 mCi to DG, 41.8 mCi to MNG and 37.5 mCi to NST. 102 (87.14%) patients at the control at 2 years after treatment presented stable response to therapy, 15 (12.86%) required a second therapy, 11 (11.70%) with BD and 4 (23.52%) with BMN; and any patient with NST required a second therapy. 83 (88.29%) of the patients with BD; 13 (76.48%) with BMN and 6 (100%) with NST the therapy was successful. Conclusion: Fixed dose of I-131 in hyperthyroidism is useful in patients with DG (11.70%). In patients with MNG whom a fixed dose is supplied, 23.52% require a

  14. Evaluation of irradiation in patient's environment receiving 131I therapy

    International Nuclear Information System (INIS)

    Husar, J.; Fueriova, A.; Borovicova, F.

    1998-01-01

    This article describes measurements made in the bed station of Clinic of Nuclear Medicine in St. Elizabeth Oncological Institute in Bratislava. There are treated thyroid cancer and thyrotoxicosis with the use of 131 I. The aim of the measurements was to determine the possibility of the ambulation treatment of thyrotoxicosis or the possibility of shortening of the patient;s stay in the bed station that the effective dose would not be exceeded suggestions according to the publication of EURATOM. The measurements were made also with thyroid cancer patients but owing to clinical reasons the ambulation treating in this case is not permissible. Therefore this article does not describe the results of these measurements.The effective dose rates were measured in 0.25 m; 0.5 m; 1 m and 2 m distances from the patient's thyroid so the effective dose in the patient's surroundings could be determined. To the present time the results of effective dose rates measurements for 17 patients were evaluated by described way. The age of the patients was from 41 to 82 years, the administered quantity of 131 I was from 259 to 481 MBq, in fractions 37 MBq, 74 MBq, or 111 MBq. The calculated effective half-life of 131 I excretion from the patients body is crucial for the length of patient's necessary staying in the bed station, were from 4.2 days to 8 days. This great extend of values is given by by the different clinical parameters of the treated patients. After the analyse of them can be said that the effective half-life increases, when the patient is elder, has greater mass of thyroid and the accumulation is higher. At the present time authors don't suggest using the ambulation treatment of thyrotoxicosis by 131 I. For discharging the patient from the hospital authors suggest to think criteria according to the model of behaviour D with the effective dose limit 0.5 mSv. For the households with children up to 2 years and/or pregnant women according to the model B with effective dose limit 0

  15. Deposition Rate and Energy Enhancements of TiN Thin-Film in a Magnetized Sheet Plasma Source

    OpenAIRE

    Hamdi Muhyuddin D. Barra; Henry J. Ramos

    2011-01-01

    Titanium nitride (TiN) has been synthesized using the sheet plasma negative ion source (SPNIS). The parameters used for its effective synthesis has been determined from previous experiments and studies. In this study, further enhancement of the deposition rate of TiN synthesis and advancement of the SPNIS operation is presented. This is primarily achieved by the addition of Sm-Co permanent magnets and a modification of the configuration in the TiN deposition process. The ...

  16. Photocatalytic activity of tin-doped TiO{sub 2} film deposited via aerosol assisted chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Chua, Chin Sheng, E-mail: cschua@simtech.a-star.edu.sg [School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, 638075 (Singapore); Tan, Ooi Kiang; Tse, Man Siu [School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 (Singapore); Ding, Xingzhao [Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, 638075 (Singapore)

    2013-10-01

    Tin-doped TiO{sub 2} films are deposited via aerosol assisted chemical vapor deposition using a precursor mixture composing of titanium tetraisopropoxide and tetrabutyl tin. The amount of tin doping in the deposited films is controlled by the volume % concentration ratio of tetrabutyl tin over titanium tetraisopropoxide in the mixed precursor solution. X-ray diffraction analysis results reveal that the as-deposited films are composed of pure anatase TiO{sub 2} phase. Red-shift in the absorbance spectra is observed attributed to the introduction of Sn{sup 4+} band states below the conduction band of TiO{sub 2}. The effect of tin doping on the photocatalytic property of TiO{sub 2} films is studied through the degradation of stearic acid under UV light illumination. It is found that there is a 10% enhancement on the degradation rate of stearic acid for the film with 3.8% tin doping in comparison with pure TiO{sub 2} film. This improvement of photocatalytic performance with tin incorporation could be ascribed to the reduction of electron-hole recombination rate through charge separation and an increased amount of OH radicals which are crucial for the degradation of stearic acid. Further increase in tin doping results in the formation of recombination site and large anatase grains, which leads to a decrease in the degradation rate. - Highlights: ► Deposition of tin-doped TiO{sub 2} film via aerosol assisted chemical vapor deposition ► Deposited anatase films show red-shifted in UV–vis spectrum with tin-dopants. ► Photoactivity improves at low tin concentration but reduces at higher concentration. ► Improvement in photoactivity due to bandgap narrowing from Sn{sup 4+} band states ► Maximum photoactivity achieved occurs for films with 3.8% tin doping.

  17. Determination of tin in cassiterite ores by colorimetry of iodometry; Determinacion de Estano en minerales y productos de concentracion

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Hernandez, B

    1972-07-01

    The analytical methods are described far the determination of tin in cassiterite ores. The gallein-colorimetric method is described for determining small amounts of tin, covering the 0,01-0,5 per cent range. The sample is decomposed by heating with ammonium iodide, and tin is analyzed colorimetrically by means of it s complex with gallein. The final measure may be brought about either visually or spectrophotometrically at 525 nm. (Author)

  18. Moessbauer study of the composition and corrosion behaviour of electrodeposited and cast brass containing 1-4 m% tin

    International Nuclear Information System (INIS)

    Vertes, A.; Suba, M.; Varsanyi-Lakatos, M.; Czako-Nagy, I.; Pchelnikov, A.P.; Losev, V.V.

    1982-01-01

    Moessbauer measurements on electrodeposited and cast brass containing 1-4 m% tin were carried out using conversion electron detector. It was found that the tin formed phases with copper but not with zinc. The identified phases were β, γ, epsilon and eta and their ratio depended on the tin concentration and on the preparation process of the brass. The corrosion behaviour of the samples was also studied. (author)

  19. Application of an imaging plate system to in vivo thyroid 131I monitoring

    International Nuclear Information System (INIS)

    Hirota, M.; Saze, T.; Nishizawa, K.

    2002-01-01

    An imaging plate (IP) system was applied to in vivo thyroid radioactive iodine 131 ( 131 I) monitoring. Thyroid contamination by 131 I occurs when medical staffs and patient's families take in 131 I used as treatment agent for thyroid cancer and hyperthyroidism in nuclear medicine, inhabitants take in 131 I released into environment by an accident of nuclear facilities, or worker take in 131 I used by experiment of research. The IP system is a two-dimensional integrating radiation detector which is a plate thinly coated plastic sheet with a kind of phosphore. The IP was exposed to a neck-thyroid phantom loaded 131 I aqueous solution. The IP system displayed a thyroid image that reflects a unique shape characteristic of the thyroid gland. A 131 I thyroid imaging allows visual confirmation of thyroid contamination by 131 I. The counting efficiency was approximately constant when neck diameter, thyroid volume and prethyroid tissue thickness varied within the normal adult. The detection limit of 450Bq was about 1/65 of the screening level of 30kBq. The IP system is applicable for thyroid 131 I monitoring

  20. Hydrochlorothiazide-induced 131I excretion facilitated by salt and water

    International Nuclear Information System (INIS)

    Beyer, K.H. Jr.; Fehr, D.M.; Gelarden, R.T.; White, W.J.; Lang, C.M.; Vesell, E.S.

    1981-01-01

    Salt intake is restricted under clinical conditions for which thiazide diuretics are customarily used. Dietary iodide intake offsets any effect of thiazide on iodide loss. However, our correlation coefficients relating Na+ to Cl- to I- excretion indicate that as thiazide administration or sodium chloride intake increases renal Na+ and Cl- excretion, I- reabsorption by the nephron coordinately decreases. Increased sodium chloride and water intake by the dog doubled I-excretion rates. Hydrochlorothiazide increased the sodium chloride and water enhanced I-excretion rate as much as eight-fold. Without added NaCl, hydrochlorothiazide increased the excretion rate of 131I by three- to eightfold, acutely. Within five to seven days after 131I oral administration, hydrochlorothiazide (1 or 2 mg/kg twice daily) doubled the rate of 131I disappearance from plasma, reduced the fecal output of 131I, and increased its rate of renal excretion. When hydrochlorothiazide was administered, as much 131I was excreted in the first 24 hours as occurred in 48 hours when sodium chloride and water were given without hydrochlorothiazide. Thiazide administration in customary clinical dosage twice a day with substantial sodium chloride and water for the first two days after exposure to 131I, should therefore facilitate the safe excretion of 131I. This accelerated removal of 131I might be enhanced even more if thyroid uptake of 131I is blocked by administration of potassium iodide, as judged by the greater 131I recovery from thyroidectomized dogs