77 FR 33007 - Submission for Review: Initial Certification of Full-Time School Attendance, RI 25-41

Science.gov (United States)

2012-06-04

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: Initial Certification of Full-Time School... and other federal agencies the opportunity to comment on a revised information collection request (ICR...

77 FR 71200 - Submission for Review: Initial Certification of Full-Time School Attendance, RI 25-41

Science.gov (United States)

2012-11-29

..., mechanical, or other technological collection techniques or other forms of information technology, e.g... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: Initial Certification of Full-Time School... and other federal agencies the opportunity to comment on a revised information collection request (ICR...

Biological timing and the clock metaphor: oscillatory and hourglass mechanisms.

Science.gov (United States)

Rensing, L; Meyer-Grahle, U; Ruoff, P

2001-05-01

Living organisms have developed a multitude of timing mechanisms--"biological clocks." Their mechanisms are based on either oscillations (oscillatory clocks) or unidirectional processes (hourglass clocks). Oscillatory clocks comprise circatidal, circalunidian, circadian, circalunar, and circannual oscillations--which keep time with environmental periodicities--as well as ultradian oscillations, ovarian cycles, and oscillations in development and in the brain, which keep time with biological timescales. These clocks mainly determine time points at specific phases of their oscillations. Hourglass clocks are predominantly found in development and aging and also in the brain. They determine time intervals (duration). More complex timing systems combine oscillatory and hourglass mechanisms, such as the case for cell cycle, sleep initiation, or brain clocks, whereas others combine external and internal periodicities (photoperiodism, seasonal reproduction). A definition of a biological clock may be derived from its control of functions external to its own processes and its use in determining temporal order (sequences of events) or durations. Biological and chemical oscillators are characterized by positive and negative feedback (or feedforward) mechanisms. During evolution, living organisms made use of the many existing oscillations for signal transmission, movement, and pump mechanisms, as well as for clocks. Some clocks, such as the circadian clock, that time with environmental periodicities are usually compensated (stabilized) against temperature, whereas other clocks, such as the cell cycle, that keep time with an organismic timescale are not compensated. This difference may be related to the predominance of negative feedback in the first class of clocks and a predominance of positive feedback (autocatalytic amplification) in the second class. The present knowledge of a compensated clock (the circadian oscillator) and an uncompensated clock (the cell cycle), as well

APPROXIMATION OF THE TIME TO INITIATE THE EVACUATION

Directory of Open Access Journals (Sweden)

Jiří POKORNÝ

2016-06-01

Full Text Available One of the basic prerequisites for securing the safety of people at large group events is to ensure their evacuation in case of emergencies. This article deals with the approximations of time to initiate the evacuation of persons in case of a fire at large group events organized in outdoor spaces. The solution is based on the principles of determining the period to initiate the evacuation of persons in terms of international ISO standards. Considering the specificities of the given outdoor space and possible related security measures, the article recommends the relevant sufficient amount of time to initiate an evacuation.

Time Asymmetric Quantum Mechanics

Directory of Open Access Journals (Sweden)

Arno R. Bohm

2011-09-01

Full Text Available The meaning of time asymmetry in quantum physics is discussed. On the basis of a mathematical theorem, the Stone-von Neumann theorem, the solutions of the dynamical equations, the Schrödinger equation (1 for states or the Heisenberg equation (6a for observables are given by a unitary group. Dirac kets require the concept of a RHS (rigged Hilbert space of Schwartz functions; for this kind of RHS a mathematical theorem also leads to time symmetric group evolution. Scattering theory suggests to distinguish mathematically between states (defined by a preparation apparatus and observables (defined by a registration apparatus (detector. If one requires that scattering resonances of width Γ and exponentially decaying states of lifetime τ=h/Γ should be the same physical entities (for which there is sufficient evidence one is led to a pair of RHS's of Hardy functions and connected with it, to a semigroup time evolution t_0≤t<∞, with the puzzling result that there is a quantum mechanical beginning of time, just like the big bang time for the universe, when it was a quantum system. The decay of quasi-stable particles is used to illustrate this quantum mechanical time asymmetry. From the analysis of these processes, we show that the properties of rigged Hilbert spaces of Hardy functions are suitable for a formulation of time asymmetry in quantum mechanics.

Time as an Observable in Nonrelativistic Quantum Mechanics

Science.gov (United States)

Hahne, G. E.

2003-01-01

The argument follows from the viewpoint that quantum mechanics is taken not in the usual form involving vectors and linear operators in Hilbert spaces, but as a boundary value problem for a special class of partial differential equations-in the present work, the nonrelativistic Schrodinger equation for motion of a structureless particle in four- dimensional space-time in the presence of a potential energy distribution that can be time-as well as space-dependent. The domain of interest is taken to be one of two semi-infinite boxes, one bounded by two t=constant planes and the other by two t=constant planes. Each gives rise to a characteristic boundary value problem: one in which the initial, input values on one t=constant wall are given, with zero asymptotic wavefunction values in all spatial directions, the output being the values on the second t=constant wall; the second with certain input values given on both z=constant walls, with zero asymptotic values in all directions involving time and the other spatial coordinates, the output being the complementary values on the z=constant walls. The first problem corresponds to ordinary quantum mechanics; the second, to a fully time-dependent version of a problem normally considered only for the steady state (time-independent Schrodinger equation). The second problem is formulated in detail. A conserved indefinite metric is associated with space-like propagation, where the sign of the norm of a unidirectional state corresponds to its spatial direction of travel.

Mechanisms and regulation of DNA replication initiation in eukaryotes.

Science.gov (United States)

Parker, Matthew W; Botchan, Michael R; Berger, James M

2017-04-01

Cellular DNA replication is initiated through the action of multiprotein complexes that recognize replication start sites in the chromosome (termed origins) and facilitate duplex DNA melting within these regions. In a typical cell cycle, initiation occurs only once per origin and each round of replication is tightly coupled to cell division. To avoid aberrant origin firing and re-replication, eukaryotes tightly regulate two events in the initiation process: loading of the replicative helicase, MCM2-7, onto chromatin by the origin recognition complex (ORC), and subsequent activation of the helicase by its incorporation into a complex known as the CMG. Recent work has begun to reveal the details of an orchestrated and sequential exchange of initiation factors on DNA that give rise to a replication-competent complex, the replisome. Here, we review the molecular mechanisms that underpin eukaryotic DNA replication initiation - from selecting replication start sites to replicative helicase loading and activation - and describe how these events are often distinctly regulated across different eukaryotic model organisms.

Quantum mechanics with quantum time

International Nuclear Information System (INIS)

Kapuscik, E.

1984-01-01

Using a non-canonical Lie structure of classical mechanics a new algebra of quantum mechanical observables is constructed. The new algebra, in addition to the notion of classical time, makes it possible to introduce the notion of quantum time. A new type of uncertainty relation is derived. (author)

Approximations of time-dependent phenomena in quantum mechanics: adiabatic versus sudden processes

International Nuclear Information System (INIS)

Melnichuk, S V; Dijk, W van; Nogami, Y

2005-01-01

By means of a one-dimensional model of a particle in an infinite square-well potential with one wall moving at a constant speed, we examine aspects of time-dependent phenomena in quantum mechanics such as adiabatic and sudden processes. The particle is assumed to be initially in the ground state of the potential with its initial width. The time dependence of the wavefunction of the particle in the well is generally more complicated when the potential well is compressed than when it is expanded. We are particularly interested in the case in which the potential well is suddenly compressed. The so-called sudden approximation is not applicable in this case. We also study the energy of the particle in the changing well as a function of time for expansion and contraction as well as for expansion followed by contraction and vice versa

Tunneling time in space fractional quantum mechanics

Science.gov (United States)

Hasan, Mohammad; Mandal, Bhabani Prasad

2018-02-01

We calculate the time taken by a wave packet to travel through a classically forbidden region of space in space fractional quantum mechanics. We obtain the close form expression of tunneling time from a rectangular barrier by stationary phase method. We show that tunneling time depends upon the width b of the barrier for b → ∞ and therefore Hartman effect doesn't exist in space fractional quantum mechanics. Interestingly we found that the tunneling time monotonically reduces with increasing b. The tunneling time is smaller in space fractional quantum mechanics as compared to the case of standard quantum mechanics. We recover the Hartman effect of standard quantum mechanics as a special case of space fractional quantum mechanics.

Selection of the initial conditions in the tunneling time definition

International Nuclear Information System (INIS)

Zajchenko, A.K.

2004-01-01

The necessity of changing of the initial conditions in the Olkhovsky - Recami definition of the tunneling time is justified. The new initial conditions are proposed which adequately taking into account the irreversibility of the wave packets spreading. The expression for the tunneling time with the new initial conditions is reduced to the form which is convenient for the performing and controlling the accuracy of calculations

Study on synthesis, application and mechanism of benzophenone/amine initiator

International Nuclear Information System (INIS)

Xiong Wei; Liu Jinshui; Wen Yinjun; Wan Qizhong; Zhou Xianyan; Xiao Hanling; Yang Jianwen

1999-01-01

Through Michael addition reaction of trimethylolpropane triacrylate (TMPTA) with diethylamine (DEA), a new kind of tertiary amine derivative was synthesized and its structure was identified by 'H-NMR. When used in combination with benzophenone, this amine presented excellent curing speed and could be a substitute for initiator Darocur R 1173, which is effective but expensive. If so, the cost of UV-curable coatings can descend apparently. The functioning mechanism of benzophenone/amine bimolecular initiator was studied

Quantum mechanics and stochastic mechanics for compatible observables at different times

International Nuclear Information System (INIS)

Correggi, M.; Morchio, G.

2002-01-01

Bohm mechanics and Nelson stochastic mechanics are confronted with quantum mechanics in the presence of noninteracting subsystems. In both cases, it is shown that correlations at different times of compatible position observables on stationary states agree with quantum mechanics only in the case of product wave functions. By appropriate Bell-like inequalities it is shown that no classical theory, in particular no stochastic process, can reproduce the quantum mechanical correlations of position variables of noninteracting systems at different times

Mechanism of crack initiation and crack growth under thermal and mechanical fatigue loading

Energy Technology Data Exchange (ETDEWEB)

Utz, S.; Soppa, E.; Silcher, H.; Kohler, C. [Stuttgart Univ. (Germany). Materials Testing Inst.

2013-07-01

The present contribution is focused on the experimental investigations and numerical simulations of the deformation behaviour and crack development in the austenitic stainless steel X6CrNiNb18-10 under thermal and mechanical cyclic loading in HCF and LCF regimes. The main objective of this research is the understanding of the basic mechanisms of fatigue damage and the development of simulation methods, which can be applied further in safety evaluations of nuclear power plant components. In this context the modelling of crack initiation and crack growth inside the material structure induced by varying thermal or mechanical loads are of particular interest. The mechanisms of crack initiation depend among other things on the type of loading, microstructure, material properties and temperature. The Nb-stabilized austenitic stainless steel in the solution-annealed condition was chosen for the investigations. Experiments with two kinds of cyclic loading - pure thermal and pure mechanical - were carried out and simulated. The fatigue behaviour of the steel X6CrNiNb18-10 under thermal loading was studied within the framework of the joint research project [4]. Interrupted thermal cyclic tests in the temperature range of 150 C to 300 C combined with non-destructive residual stress measurements (XRD) and various microscopic investigations, e.g. in SEM (Scanning Electron Microscope), were used to study the effects of thermal cyclic loading on the material. This thermal cyclic loading leads to thermal induced stresses and strains. As a result intrusions and extrusions appear inside the grains (at the surface), at which microcracks arise and evolve to a dominant crack. Finally, these microcracks cause a continuous and significant decrease of residual stresses. The fatigue behaviour of the steel X6CrNiNb18-10 under mechanical loading at room temperature was studied within the framework of the research project [5], [8]. With a combination of interrupted LCF tests and EBSD

Mechanism of crack initiation and crack growth under thermal and mechanical fatigue loading

International Nuclear Information System (INIS)

Utz, S.; Soppa, E.; Silcher, H.; Kohler, C.

2013-01-01

The present contribution is focused on the experimental investigations and numerical simulations of the deformation behaviour and crack development in the austenitic stainless steel X6CrNiNb18-10 under thermal and mechanical cyclic loading in HCF and LCF regimes. The main objective of this research is the understanding of the basic mechanisms of fatigue damage and the development of simulation methods, which can be applied further in safety evaluations of nuclear power plant components. In this context the modelling of crack initiation and crack growth inside the material structure induced by varying thermal or mechanical loads are of particular interest. The mechanisms of crack initiation depend among other things on the type of loading, microstructure, material properties and temperature. The Nb-stabilized austenitic stainless steel in the solution-annealed condition was chosen for the investigations. Experiments with two kinds of cyclic loading - pure thermal and pure mechanical - were carried out and simulated. The fatigue behaviour of the steel X6CrNiNb18-10 under thermal loading was studied within the framework of the joint research project [4]. Interrupted thermal cyclic tests in the temperature range of 150 C to 300 C combined with non-destructive residual stress measurements (XRD) and various microscopic investigations, e.g. in SEM (Scanning Electron Microscope), were used to study the effects of thermal cyclic loading on the material. This thermal cyclic loading leads to thermal induced stresses and strains. As a result intrusions and extrusions appear inside the grains (at the surface), at which microcracks arise and evolve to a dominant crack. Finally, these microcracks cause a continuous and significant decrease of residual stresses. The fatigue behaviour of the steel X6CrNiNb18-10 under mechanical loading at room temperature was studied within the framework of the research project [5], [8]. With a combination of interrupted LCF tests and EBSD

Anticipatory Postural Control of Stability during Gait Initiation Over Obstacles of Different Height and Distance Made Under Reaction-Time and Self-Initiated Instructions.

Science.gov (United States)

Yiou, Eric; Artico, Romain; Teyssedre, Claudine A; Labaune, Ombeline; Fourcade, Paul

2016-01-01

Despite the abundant literature on obstacle crossing in humans, the question of how the central nervous system (CNS) controls postural stability during gait initiation with the goal to clear an obstacle remains unclear. Stabilizing features of gait initiation include anticipatory postural adjustments (APAs) and lateral swing foot placement. To answer the above question, 14 participants initiated gait as fast as possible in three conditions of obstacle height, three conditions of obstacle distance and one obstacle-free (control) condition. Each of these conditions was performed with two levels of temporal pressure: reaction-time (high-pressure) and self-initiated (low-pressure) movements. A mechanical model of the body falling laterally under the influence of gravity and submitted to an elastic restoring force is proposed to assess the effect of initial (foot-off) center-of-mass position and velocity (or "initial center-of-mass set") on the stability at foot-contact. Results showed that the anticipatory peak of mediolateral (ML) center-of-pressure shift, the initial ML center-of-mass velocity and the duration of the swing phase, of gait initiation increased with obstacle height, but not with obstacle distance. These results suggest that ML APAs are scaled with swing duration in order to maintain an equivalent stability across experimental conditions. This statement is strengthened by the results obtained with the mechanical model, which showed how stability would be degraded if there was no adaptation of the initial center-of-mass set to swing duration. The anteroposterior (AP) component of APAs varied also according to obstacle height and distance, but in an opposite way to the ML component. Indeed, results showed that the anticipatory peak of backward center-of-pressure shift and the initial forward center-of-mass set decreased with obstacle height, probably in order to limit the risk to trip over the obstacle, while the forward center-of-mass velocity at foot

ANTICIPATORY POSTURAL CONTROL OF STABILITY DURING GAIT INITIATION OVER OBSTACLES OF DIFFERENT HEIGHT AND DISTANCE MADE UNDER REACTION-TIME AND SELF-INITIATED INSTRUCTIONS

Directory of Open Access Journals (Sweden)

Eric Yiou

2016-09-01

Full Text Available Despite the abundant literature on obstacle crossing in humans, the question of how the central nervous system (CNS controls postural stability during gait initiation with the goal to clear an obstacle remains unclear. Stabilizing features of gait initiation include anticipatory postural adjustments (APAs and lateral swing foot placement. To answer the above question, fourteen participants initiated gait as fast as possible in three conditions of obstacle height, three conditions of obstacle distance, and one obstacle-free (control condition. Each of these conditions was performed with two levels of temporal pressure: reaction-time (high-pressure and self-initiated (low-pressure movements. A mechanical model of the body falling laterally under the influence of gravity and submitted to an elastic restoring force is proposed to assess the effect of initial (foot-off center-of-mass position and velocity (or initial center-of-mass set on stability at foot-contact. Results showed that the anticipatory peak of mediolateral center-of-pressure shif, the initial mediolateral center-of-mass velocity and the duration of the swing phase of gait initiation increased with obstacle height, but not with obstacle distance. These results suggest that mediolateral APAs are scaled with swing duration in order to maintain an equivalent stability across experimental conditions. This statement is strengthened by the results obtained with the mechanical model, which showed how stability would be degraded if there was no adaptation of the initial center-of-mass set to swing duration. The anteroposterior component of APAs varied also according to obstacle height and distance, but in an opposite way to the mediolateral component. Indeed, results showed that the anticipatory peak of backward center-of-pressure shift and the initial forward center-of-mass set decreased with obstacle height, probably in order to limit the risk to trip over the obstacle, while the forward

Time-dependent importance sampling in semiclassical initial value representation calculations for time correlation functions.

Science.gov (United States)

Tao, Guohua; Miller, William H

2011-07-14

An efficient time-dependent importance sampling method is developed for the Monte Carlo calculation of time correlation functions via the initial value representation (IVR) of semiclassical (SC) theory. A prefactor-free time-dependent sampling function weights the importance of a trajectory based on the magnitude of its contribution to the time correlation function, and global trial moves are used to facilitate the efficient sampling the phase space of initial conditions. The method can be generally applied to sampling rare events efficiently while avoiding being trapped in a local region of the phase space. Results presented in the paper for two system-bath models demonstrate the efficiency of this new importance sampling method for full SC-IVR calculations.

Time Dependent Quantum Mechanics

OpenAIRE

Morrison, Peter G.

2012-01-01

We present a systematic method for dealing with time dependent quantum dynamics, based on the quantum brachistochrone and matrix mechanics. We derive the explicit time dependence of the Hamiltonian operator for a number of constrained finite systems from this formalism. Once this has been achieved we go on to calculate the wavevector as a function of time, in order to demonstrate the use of matrix methods with respect to several concrete examples. Interesting results are derived for elliptic ...

An investigation of the mechanical behavior of initially curved microplates under electrostatic actuation

KAUST Repository

Saghir, Shahid

2018-03-28

In this article, we investigate the mechanical behavior of initially curved microplates under electrostatic actuation. Microplates are essential components of many Micro-Electro-Mechanical System devices; however, they commonly undergo an initial curvature imperfection, due to the microfabrication process. Initial curvature imperfection significantly affects the mechanical behavior of microplates. In this work, we derive a dynamic analogue of the von Kármán governing equation for such plates. These equations are then used to develop a reduced order model based on the Galerkin procedure to simulate the static and dynamic behavior of the microplate. Two profiles of initial curvature commonly encountered in microfabricated structures are considered, where one assumes a variation in shape along one dimension of the plate only (cylindrical bending shape) while the other assumes a variation in shape along both dimensions of the plate. Their effects on both the static and dynamic responses of the microplates are examined and compared. We validate the reduced order model by comparing the calculated static behavior and the fundamental natural frequency with those computed by a finite element model over a range of the initial plate rise. The static behavior of the microplate is investigated when varying the DC voltage. Then, the dynamic behavior of the microplate is examined under the application of a harmonic AC voltage superimposed to a DC voltage.

Polyhomogeneous expansions from time symmetric initial data

Science.gov (United States)

Gasperín, E.; Valiente Kroon, J. A.

2017-10-01

We make use of Friedrich’s construction of the cylinder at spatial infinity to relate the logarithmic terms appearing in asymptotic expansions of components of the Weyl tensor to the freely specifiable parts of time symmetric initial data sets for the Einstein field equations. Our analysis is based on the assumption that a particular type of formal expansions near the cylinder at spatial infinity corresponds to the leading terms of actual solutions to the Einstein field equations. In particular, we show that if the Bach tensor of the initial conformal metric does not vanish at the point at infinity then the most singular component of the Weyl tensor decays near null infinity as O(\\tilde{r}-3\\ln \\tilde{r}) so that spacetime will not peel. We also provide necessary conditions on the initial data which should lead to a peeling spacetime. Finally, we show how to construct global spacetimes which are candidates for non-peeling (polyhomogeneous) asymptotics.

Determinants of timely initiation of complementary feeding among ...

African Journals Online (AJOL)

2014-05-26

May 26, 2014 ... care, exclusive breastfeeding and no siblings as independent predictors of timely initiation of ... studies[7‑9] conducted in different parts of the developing ..... services provides further benefits of counseling on issues relevant ...

STEREO WAVES Capabilities for Studying Initiation and Early-time Dynamics of Solar Eruptions

Science.gov (United States)

Kaiser, M. L.

2005-01-01

In 2006, NASA will launch the twin STEREO spacecraft from Kennedy Space Center into a pair of heliocentric orbits near 1 AU such that the spacecraft will move away from Earth (ahead and behind) at about 22 degrees per year. The purposes of the STEREO Mission are to understand the causes and mechanisms of coronal mass ejection (CME) initiation and to follow the propagation of CMEs through the heliosphere. Additionally, STEREO will study the mechanisms and sites of solar energetic particle (SEP) acceleration and determine 3-D time-dependent traces of the magnetic topology, temperature, density and velocity of the solar wind between the sun and Earth. To accomplish these goals, each STEREO spacecraft will be equipped with set of optical and particles and fields instruments including the STEREO WAVES (SWAVES) instrument which will use radio waves to track the location of CME-driven shocks (via type I1 bursts) and the 3-D topology of open field lines along which energetic particles flow (via the ubiquitous type I11 bursts). Type 11 bursts very often commence with a series of special type 111 bursts (called SA or type 111-L bursts) that likely coincide with CME liftoff time, thus SWAVES should be able to determine this time to within 15 sec. It is also known that the occurrence of SEP events is usually accompanied by type I1 radio bursts at decametric wavelengths as well as strong type III bursts at all wavelengths. SWAVES will be able to determine the initiation of these bursts to within 15 sec, and from the simultaneous measurements from the two spacecraft, should be able to triangulate their source locations. The utility of radio observations and the capabilities of SWAVES will be illustrated by showing a number of examples using the similar Wind WAVES instrument in combination with SOH0 coronagraph and RHESSI high energy X-ray/gamma ray observations.

Time evolution of some quantum-mechanical systems. Wavefunction cloning in evolving rotating systems. Finite range boundary conditions for time dependent Schroedinger Equation

International Nuclear Information System (INIS)

Arvieu, R.; Carbonell, J.; Gignoux, C.; Mangin-Brinet, M.; Rozmej, P.

1997-01-01

The time evolution of coherent rotational wave packets associated to a diatomic molecule or to a deformed nucleus has been studied. Assuming a rigid body dynamics the J(J+1) law leads to a mechanism of cloning: the way function is divided into wave packets identical to the initial one at specific time. Applications are studied for a nuclear wave packed formed by Coulomb excitation. Exact boundary conditions at finite distance for the solution of the time-dependent Schroedinger equation are derived. A numerical scheme based on Crank-Nicholson method is proposed to illustrate its applicability in several examples. (authors)

Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling

International Nuclear Information System (INIS)

Stolyarov, V.V.; Zhu, Y.T.; Raab, G.I.; Zharikov, A.I.; Valiev, R.Z.

2004-01-01

Ultrafine-grained (UFG) Ti rods were produced via cold rolling UFG and coarse-grained (CG) Ti stocks. The initial UFG stock was produced via equal channel angular pressing. It was found that the initial UFG structure had beneficial influence on the mechanical properties of the cold-rolled Ti rods. Compared with Ti rods with initial CG microstructure, the Ti rods with the initial UFG microstructure have both higher strength and higher ductility after being cold rolled to varying strains. Transmission electron microscopy revealed that the Ti rods with the initial UFG microstructure had finer, more homogeneous microstructures after cold rolling. This study demonstrates the merit of UFG Ti processed by ECAP for further shaping and forming into structural components with superior mechanical properties

Vaginal and Oral Sex Initiation Timing: A Focus on Gender and Race/Ethnicity.

Science.gov (United States)

Holway, Giuseppina Valle

2015-07-01

Most previous studies on sexual initiation timing have examined its effects on a variety of subsequent outcomes without first examining the correlates and predictors of these timing categories. Studies that do exist often do not utilize samples through young adulthood, leading to a misclassified set of sexual timing categories. In addition, the literature does not adequately address the issues of oral sex timing. Therefore, the objectives of this study were 1) to explore age-cutoffs that mark the "normative" and "non-normative" entry into vaginal and oral sex among young women and men in the U.S., creating sexual four sexual initiation timing categories - "early," "normative," "late," and "inexperienced," and; 2) to examine the association between race/ethnicity and sexual initiation timing by gender. The National Longitudinal Study of Adolescent to Adult Health (Add Health) was used in both descriptive and multivariate contexts to determine the net association of gender and race/ethnicity with vaginal and oral sex initiation timing. Age-cutoffs for vaginal sex timing were similar for women and men, yet differed by gender for oral sex timing. Women were more likely than men to initiate vaginal sex (20% vs. 18%) and oral sex (19% vs. 16%) at an early age and less likely than men to initiate these behaviors at a late age (18% vs. 19% for vaginal sex, and 15% vs. 16% for oral sex). Although most respondents initiated these two behaviors by young adulthood, a considerable proportion remained inexperienced, with men more likely than women to report inexperience with vaginal sex (7% vs. 5%), and women more likely than men to report abstaining from oral sex (8% vs. 6%). Race/ethnic differences in sexual initiation timing remained robust in the face of controls for both women and men. Understanding the timing at which adolescents and young adults transition to first vaginal and first oral sex is critical for sex education curriculum and policy makers.

Analysis of compaction initiation in human embryos by using time-lapse cinematography.

Science.gov (United States)

Iwata, Kyoko; Yumoto, Keitaro; Sugishima, Minako; Mizoguchi, Chizuru; Kai, Yoshiteru; Iba, Yumiko; Mio, Yasuyuki

2014-04-01

To analyze the initiation of compaction in human embryos in vitro by using time-lapse cinematography (TLC), with the goal of determining the precise timing of compaction and clarifying the morphological changes underlying the compaction process. One hundred and fifteen embryos donated by couples with no further need for embryo-transfer were used in this study. Donated embryos were thawed and processed, and then their morphological behavior during the initiation of compaction was dynamically observed via time-lapse cinematography (TLC) for 5 days. Although the initiation of compaction occurred throughout the period from the 4-cell to 16-cell stage, 99 (86.1 %) embryos initiated compaction at the 8-cell stage or later, with initiation at the 8-cell stage being most frequent (22.6 %). Of these 99 embryos, 49.5 % developed into good-quality blastocysts. In contrast, of the 16 (13.9 %) embryos that initiated compaction prior to the 8-cell stage, only 18.8 % developed into good-quality blastocysts. Embryos that initiated compaction before the 8-cell stage showed significantly higher numbers of multinucleated blastomeres, due to asynchronism in nuclear division at the third mitotic division resulting from cytokinetic failure. The initiation of compaction primarily occurs at the third mitotic division or later in human embryos. Embryos that initiate compaction before the 8-cell stage are usually associated with aberrant embryonic development (i.e., cytokinetic failure accompanied by karyokinesis).

Life time estimation for irradiation assisted mechanical cracking of PWR RCCA rodlets

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, Takanori; Yamaguchi, Youichirou [Nuclear Development Corp., Tokai, Ibaraki (Japan)

1999-09-01

Intergranular cracks of cladding tubes had been observed at the tips of the rodlets of PWR rod cluster control assemblies (RCCAs). Because RCCAs were important core components, an investigation was carried out to estimate their service lifetime. The reviews on their mechanism and the life time estimation are shown in this paper. The summaries are as follows. (1) The mechanism of the intergranular crack of the cladding tube was not IASCC but irradiation assisted mechanical cracking (IAMC) caused by an increase in hoop strain due to the swelling of the absorber and a decrease in elongation due to neutron irradiation. (2) The crack initiation limit of cylindrical shells made of low ductile material and subjected to internal pressure was determined in relation to the uniform strain of the material and was in accordance with that of the RCCA rodlets in an actual plant. (3) From the above investigation, the method of estimating the lifetime and countermeasures for its extension were obtained. (author)

Time Perception Mechanisms at Central Nervous System.

Science.gov (United States)

Fontes, Rhailana; Ribeiro, Jéssica; Gupta, Daya S; Machado, Dionis; Lopes-Júnior, Fernando; Magalhães, Francisco; Bastos, Victor Hugo; Rocha, Kaline; Marinho, Victor; Lima, Gildário; Velasques, Bruna; Ribeiro, Pedro; Orsini, Marco; Pessoa, Bruno; Leite, Marco Antonio Araujo; Teixeira, Silmar

2016-04-01

The five senses have specific ways to receive environmental information and lead to central nervous system. The perception of time is the sum of stimuli associated with cognitive processes and environmental changes. Thus, the perception of time requires a complex neural mechanism and may be changed by emotional state, level of attention, memory and diseases. Despite this knowledge, the neural mechanisms of time perception are not yet fully understood. The objective is to relate the mechanisms involved the neurofunctional aspects, theories, executive functions and pathologies that contribute the understanding of temporal perception. Articles form 1980 to 2015 were searched by using the key themes: neuroanatomy, neurophysiology, theories, time cells, memory, schizophrenia, depression, attention-deficit hyperactivity disorder and Parkinson's disease combined with the term perception of time. We evaluated 158 articles within the inclusion criteria for the purpose of the study. We conclude that research about the holdings of the frontal cortex, parietal, basal ganglia, cerebellum and hippocampus have provided advances in the understanding of the regions related to the perception of time. In neurological and psychiatric disorders, the understanding of time depends on the severity of the diseases and the type of tasks.

Time perception mechanisms at central nervous system

Directory of Open Access Journals (Sweden)

Rhailana Fontes

2016-04-01

Full Text Available The five senses have specific ways to receive environmental information and lead to central nervous system. The perception of time is the sum of stimuli associated with cognitive processes and environmental changes. Thus, the perception of time requires a complex neural mechanism and may be changed by emotional state, level of attention, memory and diseases. Despite this knowledge, the neural mechanisms of time perception are not yet fully understood. The objective is to relate the mechanisms involved the neurofunctional aspects, theories, executive functions and pathologies that contribute the understanding of temporal perception. Articles form 1980 to 2015 were searched by using the key themes: neuroanatomy, neurophysiology, theories, time cells, memory, schizophrenia, depression, attention-deficit hyperactivity disorder and Parkinson’s disease combined with the term perception of time. We evaluated 158 articles within the inclusion criteria for the purpose of the study. We conclude that research about the holdings of the frontal cortex, parietal, basal ganglia, cerebellum and hippocampus have provided advances in the understanding of the regions related to the perception of time. In neurological and psychiatric disorders, the understanding of time depends on the severity of the diseases and the type of tasks.

Influence of the initial grain size of silicon on microstructure and mechanical properties of reaction-sintered silicon nitride

International Nuclear Information System (INIS)

Heinrich, J.

1977-01-01

The influence of the initial grain size of the silicon powder on the microstructure and the resulting mechanical properties are studied. The smaller the grain size of the silicon powders used, the higher will be the degree of reaction at the beginning of the nitridation reaction and the higher the amount of α-modification in the fully nitridated samples. Moreover, the nitrification time can be considerably shortened when fine-grained silicon powders ( [de

Assessing cardiac preload by the Initial Systolic Time Interval obtained from impedance cardiography

Directory of Open Access Journals (Sweden)

Jan H Meijer

2010-01-01

Full Text Available The Initial Systolic Time Interval (ISTI, obtained from the electrocardiogram (ECG and impedance cardiogram (ICG, is considered to be a measure for the time delay between the electrical and mechanical activity of the heart and reflects an early active period of the cardiac cycle. The clinical relevance of this time interval is subject of study. This paper presents preliminary results of a pilot study investigating the use of ISTI in evaluating and predicting the circulatory response to fluid administration in patients after coronary artery bypass graft surgery, by comparing ISTI with cardiac output (CO responsiveness. Also the use of the pulse transit time (PTT, earlier recommended for this purpose, is investigated. The results show an inverse relationship between ISTI and CO at all moments of fluid administration and also an inverse relationship between the changes ΔISTI and ΔCO before and after full fluid administration. No relationships between PTT and CO or ΔPTT and ΔCO were found. It is concluded that ISTI is dependent upon preload, and that ISTI has the potential to be used as a clinical parameter assessing preload.

Initial mechanical ventilator settings and lung protective ventilation in the ED.

Science.gov (United States)

Wilcox, Susan R; Richards, Jeremy B; Fisher, Daniel F; Sankoff, Jeffrey; Seigel, Todd A

2016-08-01

Mechanical ventilation with low tidal volumes has been shown to improve outcomes for patients both with and without acute respiratory distress syndrome. This study aims to characterize mechanically ventilated patients in the emergency department (ED), describe the initial ED ventilator settings, and assess for associations between lung protective ventilation strategies in the ED and outcomes. This was a multicenter, prospective, observational study of mechanical ventilation at 3 academic EDs. We defined lung protective ventilation as a tidal volume of less than or equal to 8 mL/kg of predicted body weight and compared outcomes for patients ventilated with lung protective vs non-lung protective ventilation, including inhospital mortality, ventilator days, intensive care unit length of stay, and hospital length of stay. Data from 433 patients were analyzed. Altered mental status without respiratory pathology was the most common reason for intubation, followed by trauma and respiratory failure. Two hundred sixty-one patients (60.3%) received lung protective ventilation, but most patients were ventilated with a low positive end-expiratory pressure, high fraction of inspired oxygen strategy. Patients were ventilated in the ED for a mean of 5 hours and 7 minutes but had few ventilator adjustments. Outcomes were not significantly different between patients receiving lung protective vs non-lung protective ventilation. Nearly 40% of ED patients were ventilated with non-lung protective ventilation as well as with low positive end-expiratory pressure and high fraction of inspired oxygen. Despite a mean ED ventilation time of more than 5 hours, few patients had adjustments made to their ventilators. Copyright © 2016 Elsevier Inc. All rights reserved.

Timing of the initiation of parenteral nutrition in critically ill children.

Science.gov (United States)

Jimenez, Lissette; Mehta, Nilesh M; Duggan, Christopher P

2017-05-01

To review the current literature evaluating clinical outcomes of early and delayed parenteral nutrition initiation among critically ill children. Nutritional management remains an important aspect of care among the critically ill, with enteral nutrition generally preferred. However, inability to advance enteral feeds to caloric goals and contraindications to enteral nutrition often leads to reliance on parenteral nutrition. The timing of parenteral nutrition initiation is varied among critically ill children, and derives from an assessment of nutritional status, energy requirements, and physiologic differences between adults and children, including higher nutrient needs and lower body reserves. A recent randomized control study among critically ill children suggests improved clinical outcomes with avoiding initiation of parenteral nutrition on day 1 of admission to the pediatric ICU. Although there is no consensus on the optimal timing of parenteral nutrition initiation among critically ill children, recent literature does not support the immediate initiation of parenteral nutrition on pediatric ICU admission. A common theme in the reviewed literature highlights the importance of accurate assessment of nutritional status and energy expenditure in deciding when to initiate parenteral nutrition. As with all medical interventions, the initiation of parenteral nutrition should be considered in light of the known benefits of judiciously provided nutritional support with the known risks of artificial, parenteral feeding.

Quantum mechanics in curved space-time and its consequences for the theory on the flat space-time

International Nuclear Information System (INIS)

Tagirov, E.A.

1997-01-01

Thus, the structure is extracted from the initial general-relativistic setting of the quantum theory of the scalar field φ that can be considered as quantum mechanics in V 1,3 in the Schroedinger picture, which includes relativistic corrections not only in the Hamiltonian of the Schroedinger equation but also in the operators of primary observables. In the terms pertaining to these corrections the operators differ from their counterparts resulting from quantization of a classical spinless particle. In general, they do not commute at all and thus the quantum phase space loses the feature that half its coordinates retain a manifold structure, which Biedenharn called 'a miracle of quantization'. This non-commutativity expands up to the exact (in the sense 'non-asymptotic in c -2 ') quantum mechanics of a free motion in the Minkowski space-time if curvilinear coordinates are taken as observables, which are necessary if non-inertial frames of references are considered

The influence of initial defects on mechanical stress and deformation distribution in oxidized silicon

Directory of Open Access Journals (Sweden)

Kulinich O. A.

2008-10-01

Full Text Available The near-surface silicon layers in silicon – dioxide silicon systems with modern methods of research are investigated. It is shown that these layers have compound structure and their parameters depend on oxidation and initial silicon parameters. It is shown the influence of initial defects on mechanical stress and deformation distribution in oxidized silicon.

Probe initial parton density and formation time via jet quenching

International Nuclear Information System (INIS)

Wang, Xin-Nian

2002-01-01

Medium modification of jet fragmentation function due to multiple scattering and induced gluon radiation leads directly to jet quenching or suppression of leading particle distribution from jet fragmentation. One can extract an effective total parton energy loss which can be related to the total transverse momentum broadening. For an expanding medium, both are shown to be sensitive to the initial parton density and formation time. Therefore, one can extract the initial parton density and formation time from simultaneous measurements of parton energy loss and transverse momentum broadening. Implication of the recent experimental data on effects of detailed balance in parton energy loss is also discussed

Time-dependent reliability sensitivity analysis of motion mechanisms

International Nuclear Information System (INIS)

Wei, Pengfei; Song, Jingwen; Lu, Zhenzhou; Yue, Zhufeng

2016-01-01

Reliability sensitivity analysis aims at identifying the source of structure/mechanism failure, and quantifying the effects of each random source or their distribution parameters on failure probability or reliability. In this paper, the time-dependent parametric reliability sensitivity (PRS) analysis as well as the global reliability sensitivity (GRS) analysis is introduced for the motion mechanisms. The PRS indices are defined as the partial derivatives of the time-dependent reliability w.r.t. the distribution parameters of each random input variable, and they quantify the effect of the small change of each distribution parameter on the time-dependent reliability. The GRS indices are defined for quantifying the individual, interaction and total contributions of the uncertainty in each random input variable to the time-dependent reliability. The envelope function method combined with the first order approximation of the motion error function is introduced for efficiently estimating the time-dependent PRS and GRS indices. Both the time-dependent PRS and GRS analysis techniques can be especially useful for reliability-based design. This significance of the proposed methods as well as the effectiveness of the envelope function method for estimating the time-dependent PRS and GRS indices are demonstrated with a four-bar mechanism and a car rack-and-pinion steering linkage. - Highlights: • Time-dependent parametric reliability sensitivity analysis is presented. • Time-dependent global reliability sensitivity analysis is presented for mechanisms. • The proposed method is especially useful for enhancing the kinematic reliability. • An envelope method is introduced for efficiently implementing the proposed methods. • The proposed method is demonstrated by two real planar mechanisms.

Atmospheric Oxidation Mechanism of Furfural Initiated by Hydroxyl Radicals.

Science.gov (United States)

Zhao, Xiaocan; Wang, Liming

2017-05-04

Furfural is emitted into the atmosphere because of its potential applications as an intermediate to alkane fuels from biomass, industrial usages, and biomass burning. The kinetic and mechanistic information on the furfural chemistry is necessary to assess the fate of furfural in the atmosphere and its impact on the air quality. Here we studied the atmospheric oxidation mechanisms of furfural initiated by the OH radicals using quantum chemistry and kinetic calculations. The reaction of OH and furfural was initiated mainly by OH additions to C 2 and C 5 positions, forming R2 and R5 adducts, which could undergo rapid ring-breakage to form R2B and R5B, respectively. Our calculations showed that these intermediate radicals reacted rather slowly with O 2 under the atmospheric conditions because the additions of O 2 to these radicals are only slightly exothermic and highly reversible. Alternatively, these radicals would react directly with O 3 , NO 2 , HO 2 /RO 2 , etc. Namely, the atmospheric oxidation of furfural would unlikely result in ozone formation. Under typical atmospheric conditions, the main products in OH-initiated furfural oxidation include 2-oxo-3-pentene-1,5-dialdehyde, 5-hydroxy-2(5H)-furanone, 4-oxo-2- butenoic acid, and 2,5-furandione. These compounds will likely stay in the gas phase and are subject to further photo-oxidation.

Cue-dependent memory-based smooth-pursuit in normal human subjects: importance of extra-retinal mechanisms for initial pursuit.

Science.gov (United States)

Ito, Norie; Barnes, Graham R; Fukushima, Junko; Fukushima, Kikuro; Warabi, Tateo

2013-08-01

Using a cue-dependent memory-based smooth-pursuit task previously applied to monkeys, we examined the effects of visual motion-memory on smooth-pursuit eye movements in normal human subjects and compared the results with those of the trained monkeys. These results were also compared with those during simple ramp-pursuit that did not require visual motion-memory. During memory-based pursuit, all subjects exhibited virtually no errors in either pursuit-direction or go/no-go selection. Tracking eye movements of humans and monkeys were similar in the two tasks, but tracking eye movements were different between the two tasks; latencies of the pursuit and corrective saccades were prolonged, initial pursuit eye velocity and acceleration were lower, peak velocities were lower, and time to reach peak velocities lengthened during memory-based pursuit. These characteristics were similar to anticipatory pursuit initiated by extra-retinal components during the initial extinction task of Barnes and Collins (J Neurophysiol 100:1135-1146, 2008b). We suggest that the differences between the two tasks reflect differences between the contribution of extra-retinal and retinal components. This interpretation is supported by two further studies: (1) during popping out of the correct spot to enhance retinal image-motion inputs during memory-based pursuit, pursuit eye velocities approached those during simple ramp-pursuit, and (2) during initial blanking of spot motion during memory-based pursuit, pursuit components appeared in the correct direction. Our results showed the importance of extra-retinal mechanisms for initial pursuit during memory-based pursuit, which include priming effects and extra-retinal drive components. Comparison with monkey studies on neuronal responses and model analysis suggested possible pathways for the extra-retinal mechanisms.

On fatigue crack growth mechanisms of MMC: Reflection on analysis of 'multi surface initiations'

International Nuclear Information System (INIS)

Mkaddem, A.; El Mansori, M.

2009-01-01

This work attempts to examine the mechanisms of fatigue when cracks synergetically initiate in more than one site at the specimen surface. The metal matrix composites (MMC) i.e. silicon carbide particles reinforced aluminium matrix composites (Al/SiC p -MMC), seem to be good candidates to accelerate fatigue failures following multi surface initiations (MSI). Closure effects of MSI mechanisms on the variation of fatigue behaviour are explored for various stress states. Experiments were carried out using non pre-treated and pre-treated specimens. Using an Equivalent Ellipse Method (EEM), it is shown that the aspect of surface finish of specimen plays an important role on crack growth. Scanning Electron Microscope (SEM) inspections have lead to distinguishing the initiation regions from propagation regions and final separation regions. It is also revealed that the total lifetime of specimens is sensitive to heat treatment. Moreover, it is found that the appearance of MSI in cycled materials is more probable at high level of fatigue loads.

Mechanisms of knowledge flows in bottom-up and top-down cluster initiatives

Directory of Open Access Journals (Sweden)

Wojciech Dyba

2016-01-01

Full Text Available Knowledge flows are widely believed to be a phenomenon of clusters, and inducing them is one of the chief objectives in establishing and promoting cluster initiatives (CI. However, not many studies discuss how these flows and their effects may differ depending on the mode of CI creation and on the role of public authorities in this process. The main aim of this article is to compare mechanisms of knowledge flows in bottom-up and top-down cluster initiatives. The results of an empirical research involving two case studies in western Poland, obtained through the use of Social Network Analysis (SNA, allowed stating that in bottom-up cluster initiatives firms which were innovation leaders played a prime role in disseminating technological and business knowledge, while in the top-down initiatives the most important were representatives of universities and research centres as well as formal coordinators of cooperation. Policy implications stemming from these results were identified.

Thermal chemical-mechanical reactive flow model of shock initiation in solid explosives

International Nuclear Information System (INIS)

Nicholls, A.L. III; Tarver, C.M.

1998-01-01

The three dimensional Arbitrary Lagrange Eulerian hydrodynamic computer code ALE3D with fully coupled thermal-chemical-mechanical material models provides the framework for the development of a physically realistic model of shock initiation and detonation of solid explosives. The processes of hot spot formation during shock compression, subsequent ignition of reaction or failure to react, growth of reaction in individual hot spots, and coalescence of reacting hot spots during the transition to detonation can now be modeled using Arrhenius chemical kinetic rate laws and heat transfer to propagate the reactive flow. This paper discusses the growth rates of reacting hot spots in HMX and TATB and their coalescence during shock to detonation transition. Hot spot deflagration rates are found to be fast enough to consume explosive particles less than 10 mm in diameter during typical shock duration times, but larger particles must fragment and create more reactive surface area in order to be rapidly consumed

Effect of intervention initiation timing of pulsed electromagnetic field on ovariectomy-induced osteoporosis in rats.

Science.gov (United States)

Zhou, Jun; Liao, Yuan; Zeng, Yahua; Xie, Haitao; Fu, Chengxiao; Li, Neng

2017-09-01

The aim of this study is to explore the effect of timing of initiation of pulsed electromagnetic field (PEMF) therapy on bone mass, microarchitecture, and biomechanical properties, and to investigate receptor activator of NF-kB (RANK) expression in ovariectomized (OVX) rats. Sixty female Sprague-Dawley rats were randomly divided into two equal batches of three groups each (10 rats in each group). The first batch comprised of sham-operated (Sham-0 group), ovariectomized (OVX-0 group), and ovariectomized plus treated with PEMF starting from the day of OVX (Early PEMF group). The second batch comprised of sham-operated (Sham-12 group), ovariectomized (OVX-12 group), and ovariectomized plus treated with PEMF starting 12 weeks after OVX (Late PEMF group). Rats (whole body) in the early and late PEMF groups were exposed to PEMF (3.8 mT peak, 8 Hz pulse burst repetition rate). After 12 weeks of PEMF therapy, Early PEMF prevented OVX-induced deterioration in bone mineral density (BMD) and mechanical properties in lumbar vertebral body and femur, and deterioration in bone microarchitecture in lumbar vertebral body and proximal tibia. Late PEMF intervention only inhibited deterioration of BMD, bone microarchitecture, and mechanical properties in lumbar vertebral body. Both early and late PEMF therapy suppressed RANK protein expression in OVX rats without a concomitant effect on RANK mRNA expression. These results demonstrate that timing of initiation of PEMF therapy plays an important role in achieving optimal beneficial effects. The specific PEMF parameters may exert these favorable biological responses, at least partially, via inhibition of protein expression of RANK. Bioelectromagnetics. 38:456-465, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Morphological and mechanical properties of polyamide 6/linear low density polyethylene blend compatibilized by electron-beam initiated mediation process

International Nuclear Information System (INIS)

Shin, Boo Young; Han, Do Hung

2014-01-01

The aim of this study was to compatibilize immiscible polyamide 6 (PA6)/linear low density polyethylene (LLDPE) blend by using electron-beam initiated mediation process. Glycidyl methacrylate (GMA) was chosen as a mediator for cross-copolymerization at the interface between PA6 and LLDPE. The exposure process was carried out to initiate cross-copolymerization by the medium of GMA at the interface between PA and LLDPE. The mixture of the PA6/LLDPE/GMA was prepared by using a twin-screw extruder, and then the mixture was exposed to electron-beam radiation at various doses at room temperature. To investigate the results of this compatibilization strategy, the morphological and mechanical properties of the blend were analyzed. Morphology study revealed that the diameters of the dispersion particles decreased and the interfacial adhesion increased with respect to irradiation doses. The elongation at break of the blends increases significantly with increasing irradiation dose up to 100 kGy while the tensile strength and the modulus increased nonlinearly with increasing irradiation dose. The reaction mechanisms of the mediation process with the GMA mediator at the interface between PA6 and LLDPE were estimated. - Highlights: • PA6/LLDPE blend was compatibilized by the electron-beam initiated mediation process. • Interfacial adhesion was significantly enhanced by the radiation initiated cross-copolymerization. • The elongation at break of blend irradiated at 100 kGy was 4 times higher than PA6. • The GMA as a mediator played a key role in the electron-beam initiated mediation process

Affection mechanism research of initiation crack pressure of perforation parameters of horizontal well

Directory of Open Access Journals (Sweden)

Hua Tong

2016-09-01

Full Text Available Horizontal wells show better affect and higher success rate in low water ratio cement, complex fracture zone, crevice and heavy oil blocks, it is the main measures to expand control area of a single well. Hydraulic fracturing technology is the most financial way to improve the penetration of the reservoir to increase the production. However, compare with the vertical wells, the fracture of Horizontal wells are more complex, and lead to the initiation crack pressure is much higher than vertical wells. In this paper, defined the crack judging basis, and established the finite element model which could compute the initial crack pressure, to research the affection mechanism of perforation azimuth angle, density, diameter and depth, to provide references of perforation project's design and optimize. The research of this paper has significances on further understanding the affection mechanism of perforation parameters.

Numerical modelling of crack initiation and propagation in concrete structure under hydro-mechanical loading

International Nuclear Information System (INIS)

Bian, H.B.; Jia, Y.; Shao, J.F.

2012-01-01

Document available in extended abstract form only. This subject is devoted to numerical analysis of crack initiation and propagation in concrete structures due to hydro-mechanical coupling processes. When the structures subjected to the variation in hydraulic conditions, fractures occur as a consequence of coalescence of diffuse damage. Consequently, the mechanical behaviour of concrete is described by an isotropic damage model. Once the damage reaches a critical value, a macroscopic crack is initiated. In the framework of extended Finite Element Method (XFEM), the propagation of localized crack is studied in this paper. Each crack is then considered as a discontinuity surface of displacement. According to the determination of crack propagation orientations, a tensile stress-based criterion is used. Furthermore, spatial variations of mechanical properties of concrete are also taken into account using the Weibull distribution function. Finally, the proposed model is applied to numerical analysis of a concrete liner in the context of feasibility studies for geological storage of radioactive wastes. The numerical results show that the proposed approach is capable to reproduce correctly the initiation and propagation crack process until the complete failure of concrete structures during hydro-mechanical loading. The concrete is most widely used construction material in many engineering applications. It is generally submitted to various environmental loading: such as the mechanical loading, the variation of relative humidity and the exposure to chemical risk, etc. In order to evaluate the safety and durability of concrete structures, it is necessary to get a good knowledge on the influence of loading path on the concrete behaviour. The objective of this paper is to study numerically the crack propagation in concrete structure under hydro-mechanical loading,.i.e. the mechanical behaviour of concrete subjected to drying process. The drying process leads to desiccation

Comment on ‘Overcoming misconceptions in quantum mechanics with the time evolution operator’

International Nuclear Information System (INIS)

Toyama, F M; Nogami, Y

2013-01-01

In their paper ‘Overcoming misconceptions in quantum mechanics with the time evolution operator’, García Quijas and Arévalo Aguilar (2007 Eur. J. Phys. 28 147) examined the time-dependent wave function of a particle in the one-dimensional harmonic oscillator potential using two different methods. The two wave functions that the authors obtained through the methods have different analytical expressions. The authors showed numerically that the two wave functions lead to the same probability density. When the real parts of the wave functions are compared, however, they are different in their details. That was puzzling because both wave functions are supposed to be solutions of the same time-dependent Schrödinger equation with the same initial condition. We point out that the two wave functions are actually identical. We show this analytically. (letters and comments)

Introduction to quantum mechanics a time-dependent perspective

CERN Document Server

Tannor, David J

2007-01-01

"Introduction to Quantum Mechanics" covers quantum mechanics from a time-dependent perspective in a unified way from beginning to end. Intended for upper-level undergraduate and graduate courses this text will change the way people think about and teach quantum mechanics in chemistry and physics departments.

Relativistic mechanics, time and inertia

International Nuclear Information System (INIS)

Kilmister, C.W.; Tocaci, E.

1985-01-01

This book offers a thought-provoking approach to the fundamentals of relativity, and is structured to provide a clear-cut introduction to the essentials of relativistic mechanics. It seeks to emphasize the sensible content of concepts, to improve on their inherent or often forgotten fuzziness, and to explore prospects for their further exploitation. The work also provides an analysis conducive to a rigorous, normative definition of Time, which is seen as a synthesis of universal motion, instrumental in defining a general measure to transformations, and as a sufficient reason to suppose that the speed of light must be the same in all inertial reference frames - hence showing this cardinal postulate to be a demonstrable truth. Moreover it provides an augmented perception of what inertial vs. non-inertial systems are. In addition, the book offers a natural, time-like interpretation of Space that departs from the usual converse approach; it offers a self-consistent proposal to rationalize the axiomatic grounds of mechanics, based on a single postulate in conjunction with the overall approach developed. (author). refs.; figs.; tabs

Stability of orbits in nonlinear mechanics for finite but very long times

International Nuclear Information System (INIS)

Warnock, R.L.; Ruth, R.D.

1990-07-01

In various applications of nonlinear mechanics, especially in accelerator design, it would be useful to set bounds on the motion for finite but very long times. Such bounds can be sought with the help of a canonical transformation to new action-angle variables (J, Ψ), such that action J is nearly constant while the angle Ψ advances almost linearly with the time. By examining the change in J during a time T 0 from many initial conditions in the open domain Ω of phase space, one can estimate the change in J during a much larger time T, on any orbit starting in a smaller open domain Ω 0 contained-in Ω. A numerical realization of this idea is described. The canonical transformations, equivalent to close approximations to invariant tori, are constructed by an effective new method in which surfaces are fitted to orbit data. In a first application to a model sextupole lattice in a region of strong nonlinearity, we predict stability of betatron motion in two degrees of freedom for a time comparable to the storage time in a proton storage ring (10 8 turns). 10 refs., 6 figs., 1 tab

Stability of orbits in nonlinear mechanics for finite but very long times

Energy Technology Data Exchange (ETDEWEB)

Warnock, R.L.; Ruth, R.D.

1990-07-01

In various applications of nonlinear mechanics, especially in accelerator design, it would be useful to set bounds on the motion for finite but very long times. Such bounds can be sought with the help of a canonical transformation to new action-angle variables (J, {Psi}), such that action J is nearly constant while the angle {Psi} advances almost linearly with the time. By examining the change in J during a time T{sub 0} from many initial conditions in the open domain {Omega} of phase space, one can estimate the change in J during a much larger time T, on any orbit starting in a smaller open domain {Omega}{sub 0} {contained in} {Omega}. A numerical realization of this idea is described. The canonical transformations, equivalent to close approximations to invariant tori, are constructed by an effective new method in which surfaces are fitted to orbit data. In a first application to a model sextupole lattice in a region of strong nonlinearity, we predict stability of betatron motion in two degrees of freedom for a time comparable to the storage time in a proton storage ring (10{sup 8} turns). 10 refs., 6 figs., 1 tab.

Time-dependent importance sampling in semiclassical initial value representation calculations for time correlation functions. II. A simplified implementation.

Science.gov (United States)

Tao, Guohua; Miller, William H

2012-09-28

An efficient time-dependent (TD) Monte Carlo (MC) importance sampling method has recently been developed [G. Tao and W. H. Miller, J. Chem. Phys. 135, 024104 (2011)] for the evaluation of time correlation functions using the semiclassical (SC) initial value representation (IVR) methodology. In this TD-SC-IVR method, the MC sampling uses information from both time-evolved phase points as well as their initial values, and only the "important" trajectories are sampled frequently. Even though the TD-SC-IVR was shown in some benchmark examples to be much more efficient than the traditional time-independent sampling method (which uses only initial conditions), the calculation of the SC prefactor-which is computationally expensive, especially for large systems-is still required for accepted trajectories. In the present work, we present an approximate implementation of the TD-SC-IVR method that is completely prefactor-free; it gives the time correlation function as a classical-like magnitude function multiplied by a phase function. Application of this approach to flux-flux correlation functions (which yield reaction rate constants) for the benchmark H + H(2) system shows very good agreement with exact quantum results. Limitations of the approximate approach are also discussed.

Using TANF to Finance Out-of-School Time Initiatives

Science.gov (United States)

Relave, Nanette; Flynn-Khan, Margaret

2007-01-01

This report addresses how the Temporary Assistance for Needy Families (TANF) program can be an important source of funding for maintaining, improving, and expanding out-of-school time initiatives. The report is designed to help policymakers and program developers understand the opportunities and challenges of effectively using TANF funding to…

Timing of antiretroviral therapy initiation in adults with HIV ...

African Journals Online (AJOL)

Timing of antiretroviral therapy initiation in adults with HIV-associated tuberculosis: Outcomes of therapy in an urban hospital in KwaZulu-Natal. ... We aimed to compare clinical outcomes of patients with HIV-associated TB who commenced ART at different stages of TB therapy. Methods. A retrospective chart review was ...

Time-dependent efficiency measurements of polymer solar cells with dye additives: unexpected initial increase of efficiency

Science.gov (United States)

Bandaccari, Kyle J.; Chesmore, Grace E.; Bugaj, Mitchel; Valverde, Parisa Tajalli-Tehrani; Barber, Richard P.; McNelis, Brian J.

2018-04-01

We report the effects of the addition of two azo-dye additives on the time-dependent efficiency of polymer solar cells. Although the maximum efficiencies of devices containing different amounts of dye do not vary greatly over the selected concentration range, the time dependence results reveal a surprising initial increase in efficiency in some samples. We observe this effect to be correlated with a leakage current, although a specific mechanism is not yet identified. We also present the measured lifetimes of these solar cells, and find that variations in dye concentrations produce a small effect at most. Characterization of the bulk heterojunction layer (active layer) morphology using atomic-force microscope (AFM) imaging reveals reordering patterns which suggest that the primary effects of the dyes arise via structural, not absorptive, characteristics.

Guarantee of remaining life time. Integrity of mechanical components and control of ageing phenomena

International Nuclear Information System (INIS)

Schuler, X.; Herter, K.H.; Koenig, G.

2012-01-01

The life time of safety relevant systems, structures and components (SSC) of Nuclear Power Plants (NPP) is determined by two main principles. First of all the required quality has to be produced during the design and fabrication process. This means that quality has to be produced and can't be improved by excessive inspections (Basis Safety - quality through production principle). The second one is assigned to the initial quality which has to be maintained during operation. This concerns safe operation during the total life time (life time management), safety against ageing phenomena (AM - ageing management) as well as proof of integrity (e.g. break preclusion or avoidance of fracture for SSC with high safety relevance). Initiated by the Fukushima Dai-ichi event in Japan in spring 2011 for German NPP's Long Term Operation (LTO) is out of question. In June 2011 legislation took decision to phase-out from nuclear by 2022. As a fact safe operation shall be guaranteed for the remaining life time. Within this technical framework the ageing management is a key element. Depending on the safety-relevance of the SSC under observation including preventive maintenance various tasks are required in particular to clarify the mechanisms which contribute systemspecifically to the damage of the components and systems and to define their controlling parameters which have to be monitored and checked. Appropriate continuous or discontinuous measures are to be considered in this connection. The approach to ensure a high standard of quality in operation for the remaining life time and the management of the technical and organizational aspects are demonstrated and explained. The basis for ageing management to be applied to NNPs is included in Nuclear Safety Standard 1403 which describes the ageing management procedures. For SSC with high safety relevance a verification analysis for rupture preclusion (proof of integrity, integrity concept) shall be performed (Nuclear Safety Standard 3206

Stability with respect to initial time difference for generalized delay differential equations

Directory of Open Access Journals (Sweden)

Ravi Agarwal

2015-02-01

Full Text Available Stability with initial data difference for nonlinear delay differential equations is introduced. This type of stability generalizes the known concept of stability in the literature. It gives us the opportunity to compare the behavior of two nonzero solutions when both initial values and initial intervals are different. Several sufficient conditions for stability and for asymptotic stability with initial time difference are obtained. Lyapunov functions as well as comparison results for scalar ordinary differential equations are employed. Several examples are given to illustrate the theory.

Attosecond delays in photoionization: time and quantum mechanics

International Nuclear Information System (INIS)

Maquet, Alfred; Caillat, Jérémie; Taïeb, Richard

2014-01-01

This article addresses topics regarding time measurements performed on quantum systems. The motivation is linked to the advent of ‘attophysics’ which makes feasible to follow the motion of electrons in atoms and molecules, with time resolution at the attosecond (1 as = 10 −18 s) level, i.e. at the natural scale for electronic processes in these systems. In this context, attosecond ‘time-delays’ have been recently measured in experiments on photoionization and the question arises if such advances could cast a new light on the still active discussion on the status of the time variable in quantum mechanics. One issue still debatable is how to decide whether one can define a quantum time operator with eigenvalues associated to measurable ‘time-delays’, or time is a parameter, as it is implicit in the Newtonian classical mechanics. One objective of this paper is to investigate if the recent attophysics-based measurements could shed light on this parameter–operator conundrum. To this end, we present here the main features of the theory background, followed by an analysis of the experimental schemes that have been used to evidence attosecond ‘time-delays’ in photoionization. Our conclusion is that these results reinforce the view that time is a parameter which cannot be defined without reference to classical mechanics. (tutorial)

Time in quantum mechanics. Vol. 1. 2. ed.

International Nuclear Information System (INIS)

Muga, J.G.; Sala Mayato, R.; Egusquiza, I.L.

2008-01-01

The treatment of time in quantum mechanics is still an important and challenging open question in the foundation of the quantum theory. This book describes the problems, and the attempts and achievements in defining, formalizing and measuring different time quantities in quantum theory, such as the parametric (clock) time, tunneling times, decay times, dwell times, delay times, arrival times or jump times. This multi-authored book, written as an introductory guide for newcomers to the subject, as well as a useful source of information for the expert, covers many of the open questions. After the brief historical overview in the introduction, 12 contributions are devoted to conceptual and theoretical investigations as well as experimental issues in quantum-mechanical time measurements. This novel monograph should attract physicists as well as philosophers of science working in the foundations of quantum physics. For this revised second edition, all chapters have been updated and extended where appropriate. (orig.)

STUDIES ON THE INITIATION MECHANISM OF ORGANIC PEROXIDE AND N-METHACRYLOYLOXYETHYL-N-METHYL ANILINE IN METHYL METHACRYLATE POLYMERIZATION

Institute of Scientific and Technical Information of China (English)

QIU Kunyuan; GUO Dajie; GUO Xinqiu; FENG Xinde

1990-01-01

The initiation mechanism of methyl methacrylate (MMA) polymerization by organic peroxide and polymerizable aromatic tertiary amine such as N-methacryloyloxyethyl-N-methyi aniline (MEMA) binary system has been studied. The kinetics of polymerization of MMA and the ESR spectra of organic peroxide/MEMA system were determined. Based on the ESR study and the end-group analysis by UV spectra of the polymer formed, the initiation mechanism is proposed.

Timely binding of IHF and Fis to DARS2 regulates ATP–DnaA production and replication initiation

Science.gov (United States)

Kasho, Kazutoshi; Fujimitsu, Kazuyuki; Matoba, Toshihiro; Oshima, Taku; Katayama, Tsutomu

2014-01-01

In Escherichia coli, the ATP-bound form of DnaA (ATP–DnaA) promotes replication initiation. During replication, the bound ATP is hydrolyzed to ADP to yield the ADP-bound form (ADP–DnaA), which is inactive for initiation. The chromosomal site DARS2 facilitates the regeneration of ATP–DnaA by catalyzing nucleotide exchange between free ATP and ADP bound to DnaA. However, the regulatory mechanisms governing this exchange reaction are unclear. Here, using in vitro reconstituted experiments, we show that two nucleoid-associated proteins, IHF and Fis, bind site-specifically to DARS2 to activate coordinately the exchange reaction. The regenerated ATP–DnaA was fully active in replication initiation and underwent DnaA–ATP hydrolysis. ADP–DnaA formed heteromultimeric complexes with IHF and Fis on DARS2, and underwent nucleotide dissociation more efficiently than ATP–DnaA. Consistently, mutant analyses demonstrated that specific binding of IHF and Fis to DARS2 stimulates the formation of ATP–DnaA production, thereby promoting timely initiation. Moreover, we show that IHF–DARS2 binding is temporally regulated during the cell cycle, whereas Fis only binds to DARS2 in exponentially growing cells. These results elucidate the regulation of ATP–DnaA and replication initiation in coordination with the cell cycle and growth phase. PMID:25378325

Timely binding of IHF and Fis to DARS2 regulates ATP-DnaA production and replication initiation.

Science.gov (United States)

Kasho, Kazutoshi; Fujimitsu, Kazuyuki; Matoba, Toshihiro; Oshima, Taku; Katayama, Tsutomu

2014-12-01

In Escherichia coli, the ATP-bound form of DnaA (ATP-DnaA) promotes replication initiation. During replication, the bound ATP is hydrolyzed to ADP to yield the ADP-bound form (ADP-DnaA), which is inactive for initiation. The chromosomal site DARS2 facilitates the regeneration of ATP-DnaA by catalyzing nucleotide exchange between free ATP and ADP bound to DnaA. However, the regulatory mechanisms governing this exchange reaction are unclear. Here, using in vitro reconstituted experiments, we show that two nucleoid-associated proteins, IHF and Fis, bind site-specifically to DARS2 to activate coordinately the exchange reaction. The regenerated ATP-DnaA was fully active in replication initiation and underwent DnaA-ATP hydrolysis. ADP-DnaA formed heteromultimeric complexes with IHF and Fis on DARS2, and underwent nucleotide dissociation more efficiently than ATP-DnaA. Consistently, mutant analyses demonstrated that specific binding of IHF and Fis to DARS2 stimulates the formation of ATP-DnaA production, thereby promoting timely initiation. Moreover, we show that IHF-DARS2 binding is temporally regulated during the cell cycle, whereas Fis only binds to DARS2 in exponentially growing cells. These results elucidate the regulation of ATP-DnaA and replication initiation in coordination with the cell cycle and growth phase. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Timing reproduction in teleost fish: cues and mechanisms

Science.gov (United States)

Juntti, Scott A; Fernald, Russell D

2016-01-01

Fish comprise half of extant vertebrate species and use a rich variety of reproductive strategies that have yielded insights into the basic mechanisms that evolved for sex. To maximize the chances of fertilization and survival of offspring, fish species time reproduction to occur at optimal times. For years, ethologists have performed painstaking experiments to identify sensory inputs and behavioral outputs of the brain during mating. Here we review known mechanisms that generate sexual behavior, focusing on the factors that govern the timing of these displays. The development of new technologies, including high-throughput sequencing and genome engineering, have the potential to provide novel insights into how the vertebrate brain consummates mating at the appropriate time. PMID:26952366

Supersymmetric mechanics. Vol. 2. The attractor mechanism and space time singularities

International Nuclear Information System (INIS)

Bellucci, S.; Marrani, A.; Ferrara, S.

2006-01-01

This is the second volume in a series of books on the general theme of Supersymmetric Mechanics; the series is based on lectures and discussions held in 2005 and 2006 at the INFN-Laboratori Nazionali di Frascati. The first volume appears as Lect. Notes Physics, Vol. 698 ''Supersymmetric Mechanics, Vol.1: Supersymmetry, Noncommutativity and Matrix Models'' (2006) ISBN: 3-540-33313-4. The present extensive lecture supplies a pedagogical introduction, at the non-expert level, to the attractor mechanism in space-time singularities. In such a framework, supersymmetry seems to be related to dynamical systems with fixed points, describing the equilibrium state and the stability features of the thermodynamics of black holes. After a qualitative overview, explicit examples realizing the attractor mechanism are treated at some length; they include relevant cases of asymptotically flat, maximal and non-maximal, extended supergravities in 4 and 5 dimensions. A number of recent advances along various directions of research on the attractor mechanism are also given. (orig.)

Processing Mechanisms in Hearing-Impaired Listeners: Evidence from Reaction Times and Sentence Interpretation.

Science.gov (United States)

Carroll, Rebecca; Uslar, Verena; Brand, Thomas; Ruigendijk, Esther

The authors aimed to determine whether hearing impairment affects sentence comprehension beyond phoneme or word recognition (i.e., on the sentence level), and to distinguish grammatically induced processing difficulties in structurally complex sentences from perceptual difficulties associated with listening to degraded speech. Effects of hearing impairment or speech in noise were expected to reflect hearer-specific speech recognition difficulties. Any additional processing time caused by the sustained perceptual challenges across the sentence may either be independent of or interact with top-down processing mechanisms associated with grammatical sentence structure. Forty-nine participants listened to canonical subject-initial or noncanonical object-initial sentences that were presented either in quiet or in noise. Twenty-four participants had mild-to-moderate hearing impairment and received hearing-loss-specific amplification. Twenty-five participants were age-matched peers with normal hearing status. Reaction times were measured on-line at syntactically critical processing points as well as two control points to capture differences in processing mechanisms. An off-line comprehension task served as an additional indicator of sentence (mis)interpretation, and enforced syntactic processing. The authors found general effects of hearing impairment and speech in noise that negatively affected perceptual processing, and an effect of word order, where complex grammar locally caused processing difficulties for the noncanonical sentence structure. Listeners with hearing impairment were hardly affected by noise at the beginning of the sentence, but were affected markedly toward the end of the sentence, indicating a sustained perceptual effect of speech recognition. Comprehension of sentences with noncanonical word order was negatively affected by degraded signals even after sentence presentation. Hearing impairment adds perceptual processing load during sentence processing

Effect of closed-loop order processing on the time to initial antimicrobial therapy.

Science.gov (United States)

Panosh, Nicole; Rew, Richardd; Sharpe, Michelle

2012-08-15

The results of a study comparing the average time to initiation of i.v. antimicrobial therapy with closed-versus open-loop order entry and processing are reported. A retrospective cohort study was performed to compare order-to-administration times for initial doses of i.v. antimicrobials before and after a closed-loop order-processing system including computerized prescriber order entry (CPOE) was implemented at a large medical center. A total of 741 i.v. antimicrobial administrations to adult patients during designated five-month preimplementation and postimplementation study periods were assessed. Drug-use reports generated by the pharmacy database were used to identify order-entry times, and medication administration records were reviewed to determine times of i.v. antimicrobial administration. The mean ± S.D. order-to-administration times before and after the implementation of the CPOE system and closed-loop order processing were 3.18 ± 2.60 and 2.00 ± 1.89 hours, respectively, a reduction of 1.18 hours (p Closed-loop order processing was associated with significant reductions in the average time to initiation of i.v. therapy in all patient care areas evaluated (cardiology, general medicine, and oncology). The study results suggest that CPOE-based closed-loop order processing can play an important role in achieving compliance with current practice guidelines calling for increased efforts to ensure the prompt initiation of i.v. antimicrobials for severe infections (e.g., sepsis, meningitis). Implementation of a closed-loop order-processing system resulted in a significant decrease in order-to-administration times for i.v. antimicrobial therapy.

Effect of Cue Timing and Modality on Gait Initiation in Parkinson Disease With Freezing of Gait.

Science.gov (United States)

Lu, Chiahao; Amundsen Huffmaster, Sommer L; Tuite, Paul J; Vachon, Jacqueline M; MacKinnon, Colum D

2017-07-01

To examine the effects of cue timing, across 3 sensory modalities, on anticipatory postural adjustments (APAs) during gait initiation in people with Parkinson disease (PD). Observational study. Biomechanics research laboratory. Individuals with idiopathic PD (N=25; 11 with freezing of gait [FOG]) were studied in the off-medication state (12-h overnight withdrawal). Gait initiation was tested without cueing (self-initiated) and with 3 cue timing protocols: fixed delay (3s), random delay (4-12s), and countdown (3-2-1-go, 1-s intervals) across 3 sensory modalities (acoustic, visual, and vibrotactile). The incidence and spatiotemporal characteristics of APAs during gait initiation were analyzed, including vertical ground reaction forces and center of pressure. All cue timings and modalities increased the incidence and amplitude of APAs compared with self-initiated stepping. Acoustic and visual cues, but not vibrotactile stimulation, improved the timing of APAs. Fixed delay or countdown timing protocols were more effective at decreasing APA durations than random delay cues. Cue-evoked improvements in APA timing, but not amplitude, correlated with the level of impairment during self-initiated gait. Cues did not improve the late push-off phase in the FOG group. External cueing improves gait initiation in PD regardless of cue timing, modality, or clinical phenotype (with and without FOG). Acoustic or visual cueing with predictive timing provided the greatest improvements in gait initiation; therefore, these protocols may provide the best outcomes when applied by caregivers or devices. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Fractional Differential Equations in Terms of Comparison Results and Lyapunov Stability with Initial Time Difference

Directory of Open Access Journals (Sweden)

Coşkun Yakar

2010-01-01

Full Text Available The qualitative behavior of a perturbed fractional-order differential equation with Caputo's derivative that differs in initial position and initial time with respect to the unperturbed fractional-order differential equation with Caputo's derivative has been investigated. We compare the classical notion of stability to the notion of initial time difference stability for fractional-order differential equations in Caputo's sense. We present a comparison result which again gives the null solution a central role in the comparison fractional-order differential equation when establishing initial time difference stability of the perturbed fractional-order differential equation with respect to the unperturbed fractional-order differential equation.

Initial Systolic Time Interval (ISTI) as a Predictor of Intradialytic Hypotension (IDH)

International Nuclear Information System (INIS)

Biesheuvel, J D; Verdaasdonk, R M; Meijer, JH; Vervloet, M G

2013-01-01

In haemodialysis treatment the clearance and volume control by the kidneys of a patient are partially replaced by intermittent haemodialysis. Because this artificial process is performed on a limited time scale, unphysiological imbalances in the fluid compartments of the body occur, that can lead to intradialytic hypotensions (IDH). An IDH endangers the efficacy of the haemodialysis session and is associated with dismal clinical endpoints, including mortality. A diagnostic method that predicts the occurrence of these drops in blood pressure could facilitate timely measures for the prevention of IDH. The present study investigates whether the Initial Systolic Time Interval (ISTI) can provide such a diagnostic method. The ISTI is defined as the time difference between the R-peak in the electrocardiogram (ECG) and the C-wave in the impedance cardiogram (ICG) and is considered to be a non-invasive assessment of the time delay between the electrical and mechanical activity of the heart. This time delay has previously been found to depend on autonomic nervous function as well as preload of the heart. Therefore, it can be expected that ISTI may predict an imminent IDH caused by a low circulating blood volume. This ongoing observational clinical study investigates the relationship between changes in ISTI and subsequent drops in blood pressure during haemodialysis. A registration of a complicated dialysis showed a significant correlation between a drop in blood pressure, a decrease in relative blood volume and a substantial increase in ISTI. An uncomplicated dialysis, in which also a considerable amount of fluid was removed, showed no correlations. Both, blood pressure and ISTI remained stable. In conclusion, the preliminary results of the present study show a substantial response of ISTI to haemodynamic instability, indicating an application in optimization and individualisation of the dialysis process.

Using the Initial Systolic Time Interval to assess cardiac autonomic function in Parkinson’s disease

Directory of Open Access Journals (Sweden)

Jan H. Meijer

2011-12-01

Full Text Available The Initial Systolic Time Interval (ISTI has been defined as the time difference between the peak electrical and peak mechanical activity of the heart. ISTI is obtained from the electro-cardiogram and the impedance cardiogram. The response of ISTI while breathing at rest and to a deep breathing stimulus was studied in a group of patients suffering from Parkinson's disease (PD and a group of healthy control subjects. ISTI showed substantial variability during these manoeuvres. The tests showed that the variability of RR and ISTI was substantially different between PD patients and controls. It is hypothesized that in PD patients the sympathetic system compensates for the loss of regulatory control function of the blood-pressure by the parasympathetic system. It is concluded that ISTI is a practical, additional and independent parameter that can be used to assist other tests in evaluating autonomic control of the heart in PD patients.doi:10.5617/jeb.216 J Electr Bioimp, vol. 2, pp. 98-101, 2011

Effect of curing time on microstructure and mechanical strength ...

Indian Academy of Sciences (India)

The aim of this paper is to study the influence of curing time on the microstructure and mechanical strength development of alkali activated binders based on vitreous calcium aluminosilicate (VCAS). Mechanical strength of alkali activated mortars cured at 65 °C was assessed for different curing times (4–168 h) using 10 ...

Errors in Postural Preparation Lead to Increased Choice Reaction Times for Step Initiation in Older Adults

Science.gov (United States)

Nutt, John G.; Horak, Fay B.

2011-01-01

Background. This study asked whether older adults were more likely than younger adults to err in the initial direction of their anticipatory postural adjustment (APA) prior to a step (indicating a motor program error), whether initial motor program errors accounted for reaction time differences for step initiation, and whether initial motor program errors were linked to inhibitory failure. Methods. In a stepping task with choice reaction time and simple reaction time conditions, we measured forces under the feet to quantify APA onset and step latency and we used body kinematics to quantify forward movement of center of mass and length of first step. Results. Trials with APA errors were almost three times as common for older adults as for younger adults, and they were nine times more likely in choice reaction time trials than in simple reaction time trials. In trials with APA errors, step latency was delayed, correlation between APA onset and step latency was diminished, and forward motion of the center of mass prior to the step was increased. Participants with more APA errors tended to have worse Stroop interference scores, regardless of age. Conclusions. The results support the hypothesis that findings of slow choice reaction time step initiation in older adults are attributable to inclusion of trials with incorrect initial motor preparation and that these errors are caused by deficits in response inhibition. By extension, the results also suggest that mixing of trials with correct and incorrect initial motor preparation might explain apparent choice reaction time slowing with age in upper limb tasks. PMID:21498431

Effect of initial bulk density on high-solids anaerobic digestion of MSW: General mechanism.

Science.gov (United States)

Caicedo, Luis M; Wang, Hongtao; Lu, Wenjing; De Clercq, Djavan; Liu, Yanjun; Xu, Sai; Ni, Zhe

2017-06-01

Initial bulk density (IBD) is an important variable in anaerobic digestion since it defines and optimizes the treatment capacity of a system. This study reveals the mechanism on how IBD might affect anaerobic digestion of waste. Four different IBD values: D 1 (500-700kgm -3 ), D 2 (900-1000kgm -3 ), D 3 (1100-1200kgm -3 ) and D 4 (1200-1400kgm -3 ) were set and tested over a period of 90days in simulated landfill reactors. The main variables affected by the IBD are the methane generation, saturation degree, extraction of organic matter, and the total population of methanogens. The study identified that IBD >1000kgm -3 may have significant effect on methane generation, either prolonging the lag time or completely inhibiting the process. This study provides a new understanding of the anaerobic digestion process in saturated high-solids systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Parent-child communication and marijuana initiation: evidence using discrete-time survival analysis.

Science.gov (United States)

Nonnemaker, James M; Silber-Ashley, Olivia; Farrelly, Matthew C; Dench, Daniel

2012-12-01

This study supplements existing literature on the relationship between parent-child communication and adolescent drug use by exploring whether parental and/or adolescent recall of specific drug-related conversations differentially impact youth's likelihood of initiating marijuana use. Using discrete-time survival analysis, we estimated the hazard of marijuana initiation using a logit model to obtain an estimate of the relative risk of initiation. Our results suggest that parent-child communication about drug use is either not protective (no effect) or - in the case of youth reports of communication - potentially harmful (leading to increased likelihood of marijuana initiation). Copyright © 2012 Elsevier Ltd. All rights reserved.

On the initial condition problem of the time domain PMCHWT surface integral equation

KAUST Repository

Uysal, Ismail Enes; Bagci, Hakan; Ergin, A. Arif; Ulku, H. Arda

2017-01-01

Non-physical, linearly increasing and constant current components are induced in marching on-in-time solution of time domain surface integral equations when initial conditions on time derivatives of (unknown) equivalent currents are not enforced

An Assessment of Dialysis Provider's Attitudes towards Timing of Dialysis Initiation in Canada

Directory of Open Access Journals (Sweden)

Bikaramjit S Mann

2014-04-01

Full Text Available Background: Physicians' perceptions and opinions may influence when to initiate dialysis. Objective: To examine providers' perspectives and opinions regarding the timing of dialysis initiation. Design: Online survey. Setting: Community and academic dialysis practices in Canada. Participants: A nationally-representative sample of dialysis providers. Measurements and Methods: Dialysis providers opinions assessing reasons to initiate dialysis at low or high eGFR. Responses were obtained using a 9-point Likert scale. Early dialysis was defined as initiation of dialysis in an individual with an eGFR greater than or equal to 10.5 ml/min/m 2 . A detailed survey was emailed to all members of the Canadian Society of Nephrology (CSN in February 2013. The survey was designed and pre-tested to evaluate duration and ease of administration. Results: One hundred and forty one (25% response rate physicians participated in the survey. The majority were from urban, academic centres and practiced in regionally administered renal programs. Very few respondents had a formal policy regarding the timing of dialysis initiation or formally reviewed new dialysis starts (N = 4, 3.1%. The majority of respondents were either neutral or disagreed that late compared to early dialysis initiation improved outcomes (85–88%, had a negative impact on quality of life (89%, worsened AVF or PD use (84–90%, led to sicker patients (83% or was cost effective (61%. Fifty-seven percent of respondents felt uremic symptoms occurred earlier in patients with advancing age or co-morbid illness. Half (51.8% of the respondents felt there was an absolute eGFR at which they would initiate dialysis in an asymptomatic patient. The majority of respondents would initiate dialysis for classic indications for dialysis, such as volume overload (90.1% and cachexia (83.7% however a significant number chose other factors that may lead them to early dialysis initiation including avoiding an emergency (28

Individuation in Quantum Mechanics and Space-Time

Science.gov (United States)

Jaeger, Gregg

2010-10-01

Two physical approaches—as distinct, under the classification of Mittelstaedt, from formal approaches—to the problem of individuation of quantum objects are considered, one formulated in spatiotemporal terms and one in quantum mechanical terms. The spatiotemporal approach itself has two forms: one attributed to Einstein and based on the ontology of space-time points, and the other proposed by Howard and based on intersections of world lines. The quantum mechanical approach is also provided here in two forms, one based on interference and another based on a new Quantum Principle of Individuation (QPI). It is argued that the space-time approach to individuation fails and that the quantum approach offers several advantages over it, including consistency with Leibniz’s Principle of Identity of Indiscernibles.

Implementing real-time GNSS monitoring to investigate continental rift initiation processes

Science.gov (United States)

Jones, J. R.; Stamps, D. S.; Wauthier, C.; Daniels, M. D.; Saria, E.; Ji, K. H.; Mencin, D.; Ntambila, D.

2017-12-01

Continental rift initiation remains an elusive, yet fundamental, process in the context of plate tectonic theory. Our early work in the Natron Rift, Tanzania, the Earth's archetype continental rift initiation setting, indicates feedback between volcanic deformation and fault slip play a key role in the rift initiation process. We found evidence that fault slip on the Natron border fault during active volcanism at Ol Doniyo Lengai in 2008 required only 0.01 MPa of Coulomb stress change. This previous study was limited by GPS constraints 18 km from the volcano, rather than immediately adjacent on the rift shoulder. We hypothesize that fault slip adjacent to the volcano creeps, and without the need for active eruption. We also hypothesize silent slip events may occur over time-scales less than 1 day. To test our hypotheses we designed a GNSS network with 4 sites on the flanks of Ol Doinyo Lengai and 1 site on the adjacent Natron border fault with the capability to calculate 1 second, 3-5 cm precision positions. Data is transmitted to UNAVCO in real-time with remote satellite internet, which we automatically import to the EarthCube building block CHORDS (Cloud Hosted Real-time Data Services for the Geosciences) using our newly developed method. We use CHORDS to monitor and evaluate the health of our network while visualizing the GNSS data in real-time. In addition to our import method we have also developed user-friendly capabilities to export GNSS positions (longitude, latitude, height) with CHORDS assuming the data are available at UNAVCO in NMEA standardized format through the Networked Transport of RTCM via Internet Protocol (NTRIP). The ability to access the GNSS data that continuously monitors volcanic deformation, tectonics, and their interactions on and around Ol Doinyo Lengai is a crucial component in our investigation of continental rift initiation in the Natron Rift, Tanzania. Our new user-friendly methods developed to access and post-process real-time GNSS

Overcoming misconceptions in quantum mechanics with the time evolution operator

International Nuclear Information System (INIS)

Garcia Quijas, P C; Arevalo Aguilar, L M

2007-01-01

Recently, there have been many efforts to use the research techniques developed in the field of physics education research to improve the teaching and learning of quantum mechanics. In particular, part of this research is focusing on misconceptions held by students. For instance, a set of misconceptions is associated with the concept of stationary states. In this paper, we argue that a possible way to remove these is to solve the Schroedinger equation using the evolution operator method (EOM), and stress the fact that to find stationary states is only the first step in solving that equation. The EOM consists in solving the Schroedinger equation by direct integration, i.e. Ψ(x, t) = U(t)Ψ(x, 0), where U(t)=e -itH-hat/h is the time evolution operator, and Ψ(x, 0) is the initial state. We apply the evolution operator method in the case of the harmonic oscillator

Real-time observations of mechanical stimulus-induced enhancements of mechanical properties in osteoblast cells

International Nuclear Information System (INIS)

Zhang Xu; Liu Xiaoli; Sun Jialun; He Shuojie; Lee, Imshik; Pak, Hyuk Kyu

2008-01-01

Osteoblast, playing a key role in the pathophysiology of osteoporosis, is one of the mechanical stress sensitive cells. The effects of mechanical load-induced changes of mechanical properties in osteoblast cells were studied at real-time. Osteoblasts obtained from young Wister rats were exposed to mechanical loads in different frequencies and resting intervals generated by atomic force microscopy (AFM) probe tip and simultaneously measured the changes of the mechanical properties by AFM. The enhancement of the mechanical properties was observed and quantified by the increment of the apparent Young's modulus, E * . The observed mechanical property depended on the frequency of applied tapping loads. For the resting interval is 50 s, the mechanical load-induced enhancement of E * -values disappears. It seems that the enhanced mechanical property was recover able under no additional mechanical stimulus

Molecular mechanism of VDE-initiated intein homing in yeast nuclear genome.

Science.gov (United States)

Fukuda, Tomoyuki; Nagai, Yuri; Ohya, Yoshikazu

2004-01-01

In Saccharomyces cerevisiae, VMA1 intein encodes a homing endonuclease termed VDE which is produced by an autocatalytic protein splicing reaction. VDE introduces a DSB at its recognition sequence on intein-minus allele, resulting in the lateral transfer of VMA1 intein. In this review, we summarize a decade of in vitro study on VDE and describe our recent study on the in vivo behavior of both VDE and host proteins involved in intein mobility. Meiotic DSBs caused by VDE are repaired in the similar pathway to that working in meiotic recombination induced by Spo11p-mediated DSBs. Meiosis-specific DNA cleavage and homing is shown to be guaranteed by the two distinct mechanisms, the subcellular localization of VDE and a requirement of premeiotic DNA replication. Based on these lines of evidence, we present the whole picture of molecular mechanism of VDE-initiated homing in yeast cells.

Time Operator in Relativistic Quantum Mechanics

Science.gov (United States)

Khorasani, Sina

2017-07-01

It is first shown that the Dirac’s equation in a relativistic frame could be modified to allow discrete time, in agreement to a recently published upper bound. Next, an exact self-adjoint 4 × 4 relativistic time operator for spin-1/2 particles is found and the time eigenstates for the non-relativistic case are obtained and discussed. Results confirm the quantum mechanical speculation that particles can indeed occupy negative energy levels with vanishingly small but non-zero probablity, contrary to the general expectation from classical physics. Hence, Wolfgang Pauli’s objection regarding the existence of a self-adjoint time operator is fully resolved. It is shown that using the time operator, a bosonic field referred here to as energons may be created, whose number state representations in non-relativistic momentum space can be explicitly found.

Irrigation initiation timing in soybean grown on sandy soils in Northeast Arkansas

Science.gov (United States)

Irrigation initiation timing was evaluated in furrow-irrigated soybean field with sandy soils in Mississippi County, AR. A major objective of this 2015 study was to validate and expand irrigation timing recommendations that pair plant growth measures with weather cues including use of local weather ...

Action simulation: time course and representational mechanisms

Science.gov (United States)

Springer, Anne; Parkinson, Jim; Prinz, Wolfgang

2013-01-01

The notion of action simulation refers to the ability to re-enact foreign actions (i.e., actions observed in other individuals). Simulating others' actions implies a mirroring of their activities, based on one's own sensorimotor competencies. Here, we discuss theoretical and experimental approaches to action simulation and the study of its representational underpinnings. One focus of our discussion is on the timing of internal simulation and its relation to the timing of external action, and a paradigm that requires participants to predict the future course of actions that are temporarily occluded from view. We address transitions between perceptual mechanisms (referring to action representation before and after occlusion) and simulation mechanisms (referring to action representation during occlusion). Findings suggest that action simulation runs in real-time; acting on newly created action representations rather than relying on continuous visual extrapolations. A further focus of our discussion pertains to the functional characteristics of the mechanisms involved in predicting other people's actions. We propose that two processes are engaged, dynamic updating and static matching, which may draw on both semantic and motor information. In a concluding section, we discuss these findings in the context of broader theoretical issues related to action and event representation, arguing that a detailed functional analysis of action simulation in cognitive, neural, and computational terms may help to further advance our understanding of action cognition and motor control. PMID:23847563

Optimal time for initiating extracorporeal membrane oxygenation.

Science.gov (United States)

Haile, Dawit T; Schears, Gregory J

2009-09-01

The technical evolution of extracorporeal membrane oxygenation (ECMO) coincides with the vast improvement in intensive care medicine of the past 4 decades. Extracorporeal circulatory technology substitutes for acutely failed cardiac or pulmonary function until these organs regain sustainable function through goal-oriented intensive care practice. The technology has been validated to improve survival in select patients who would otherwise have 100% mortality. This is by far the most complex life-sustaining technology employed and thus can contribute significant risks such that the decision to institute ECMO requires prompt risk and benefit analysis. Delaying the institution of ECMO may cause irreversible pulmonary and cardiac injuries in addition to other organs. Therefore, the optimal time of initiating ECMO support is crucial to the survival of a critically ill patient.

Theoretical perspectives on the mechanism and kinetics of the OH radical-initiated gas-phase oxidation of PCB126 in the atmosphere

International Nuclear Information System (INIS)

Dang, Juan; Shi, Xiangli; Zhang, Qingzhu; Wang, Wenxing

2015-01-01

Polychlorinated biphenyls (PCBs) primarily exist in the gas phase in air and may undergo atmospheric oxidation degradations, particularly the oxidation reaction initiated by OH radicals. In this work, the mechanism of the OH radical-initiated atmospheric oxidation of the most toxic PCB congener 3,3′,4,4′,5-pentachlorobiphenyl (PCB126) was investigated by using quantum chemistry methods. The rate constants of the crucial elementary reactions were estimated by the Rice–Ramsperger–Kassel–Marcus (RRKM) theory. The oxidation products of the reaction of PCB126 with OH radicals include 3,3′,4,4′,5-pentachlorobiphenyl-ols, chlorophenols, 2,3,4,7,8-pentachlorodibenzofuran, 2,3,4,6,7-pentachlorodibenzofuran, dialdehydes, 3,3′,4,4′,5-pentachloro-5′-nitro-biphenyl, and 4,5-dichloro-2-nitrophenol. Particularly, the formation of polychlorinated dibenzofurans (PCDFs) from the atmospheric oxidation of PCBs is revealed for the first time. The overall rate constant of the OH addition reaction is 2.52 × 10 −13 cm 3 molecule −1 s −1 at 298 K and 1 atm. The atmospheric lifetime of PCB126 determined by OH radicals is about 47.08 days which indicates that PCB126 can be transported long distances from local to global scales. - Highlights: • A comprehensive mechanism of OH-initiated oxidation of PCB126 was investigated. • The formation of PCDFs from the oxidation of PCBs is determined for the first time. • The rate constants for key elementary reactions were estimated by the RRKM theory. • The atmospheric lifetime of PCB126 determined by OH radicals is about 47.08 days

Effect of initialization time on application potentiality of a ZnO thin film based LPG sensor

Directory of Open Access Journals (Sweden)

Parta Mitra

2009-09-01

Full Text Available A prototype electronic LPG (Liquid Petroleum Gas sensor based on zinc oxide (ZnO film has been fabricated. The objective of the present work was to investigate the importance of initialization time (also called warm-up time on the application potentiality of the ZnO based alarm. The role of sensor geometry on initialization time is presented. The electronic circuitry of the prototype LPG device alarm is discussed. It is shown that that the initialization time depends on the switch off time (or the time for which the sensor was kept idle. The resistive mode sensors can be fixed at 40% LEL (Lower Explosive Limit of LPG for safe operation.

Mechanically activated SHS reaction in the Fe-Al system: in-situ time resolved diffraction using synchrotron radiation

International Nuclear Information System (INIS)

Gaffet, E.; Charlot, F.; Klein, D.; Bernard, F.; Niepce, J.C.

1998-01-01

The mechanical activation self propagating high temperature synthesis (M.A.S.H.S.) processing is a new way to produce nanocrystalline iron aluminide intermetallic compounds. This process is maily the combination of two steps; in the one hand, a mechanical activation where the Fe - Al powder mixture was milled during a short time at given energy and frequency of shocks and in the other hand, a self propagating high temperature synthesis (S.H.S.) reaction, for which the exothermicity of the Fe + Al reaction is used. This fast propagated MASHS reaction has been in-situ investigated using the time resolved X-ray diffraction (TRXRD) using a X-ray synchrotron beam and an infrared thermography camera, allowing the coupling of the materials structure and the temperature field. The effects of the initial mean compositions, of the milling conditions as well as of the compaction parameters on the MASHS reaction are reported. (orig.)

On the common mechanism for initiation of different effects of low doses of ionizing radiations

International Nuclear Information System (INIS)

Ehjdus, L.Kh.

1996-01-01

Main regularities of different endpoints of ionizing radiation low dose effects (adaptive response, stimulation of proliferation, special radiosensitivity of lymphoid cells, and others) have been examined. It has been shown that these endpoints have a commonness for the dose interval, the shape of the dose-response curve, the reverse effect of dose rate, non-specificity toward initiating agents, and others. An explanation is suggested for the common mechanism of the initiation of all the studied low dose effects, basing on the theory of the non-specific reaction of cell to external influences. It is concluded that initiation of the low dose effects is conditioned by radiation induced damage of functions of plasmic and internal membranes

Quantum mechanics in chemistry

CERN Document Server

Schatz, George C

2002-01-01

Intended for graduate and advanced undergraduate students, this text explores quantum mechanical techniques from the viewpoint of chemistry and materials science. Dynamics, symmetry, and formalism are emphasized. An initial review of basic concepts from introductory quantum mechanics is followed by chapters examining symmetry, rotations, and angular momentum addition. Chapter 4 introduces the basic formalism of time-dependent quantum mechanics, emphasizing time-dependent perturbation theory and Fermi's golden rule. Chapter 5 sees this formalism applied to the interaction of radiation and matt

Skinner-Rusk approach to time-dependent mechanics

NARCIS (Netherlands)

Cortés, Jorge; Martínez, Sonia; Cantrijn, Frans

2002-01-01

The geometric approach to autonomous classical mechanical systems in terms of a canonical first-order system on the Whitney sum of the tangent and cotangent bundle, developed by Skinner and Rusk, is extended to the time-dependent framework.

[Just-in-time initiation of optimal dialysis].

Science.gov (United States)

Cornelis, Tom; Kooman, Jeroen P; van der Sande, Frank M

2010-01-01

The IDEAL trial shows that the decision to start renal replacement treatment should not depend on GFR alone, but should be taken on the basis of clinical parameters. Quality of Life (QoL) questionnaires and bio-impedance analysis are potential tools for detecting subtle changes in the predialysis clinic. Too early an initiation of dialysis may be deleterious for the patient and the healthcare system. We are convinced that ESRD patients should be informed about intensive haemodialysis (HD), especially nocturnal (home) HD, as the best available dialysis modality. There is substantial evidence which shows that intensive HD improves clinical, biochemical and biological parameters, and may even prolong survival. We believe that 'just-in-time delivery of intensive haemodialysis' may result in optimised QoL and reduced economic burden.

Simulating mixed-phase Arctic stratus clouds: sensitivity to ice initiation mechanisms

Directory of Open Access Journals (Sweden)

G. McFarquhar

2009-07-01

Full Text Available The importance of Arctic mixed-phase clouds on radiation and the Arctic climate is well known. However, the development of mixed-phase cloud parameterization for use in large scale models is limited by lack of both related observations and numerical studies using multidimensional models with advanced microphysics that provide the basis for understanding the relative importance of different microphysical processes that take place in mixed-phase clouds. To improve the representation of mixed-phase cloud processes in the GISS GCM we use the GISS single-column model coupled to a bin resolved microphysics (BRM scheme that was specially designed to simulate mixed-phase clouds and aerosol-cloud interactions. Using this model with the microphysical measurements obtained from the DOE ARM Mixed-Phase Arctic Cloud Experiment (MPACE campaign in October 2004 at the North Slope of Alaska, we investigate the effect of ice initiation processes and Bergeron-Findeisen process (BFP on glaciation time and longevity of single-layer stratiform mixed-phase clouds. We focus on observations taken during 9–10 October, which indicated the presence of a single-layer mixed-phase clouds. We performed several sets of 12-h simulations to examine model sensitivity to different ice initiation mechanisms and evaluate model output (hydrometeors' concentrations, contents, effective radii, precipitation fluxes, and radar reflectivity against measurements from the MPACE Intensive Observing Period. Overall, the model qualitatively simulates ice crystal concentration and hydrometeors content, but it fails to predict quantitatively the effective radii of ice particles and their vertical profiles. In particular, the ice effective radii are overestimated by at least 50%. However, using the same definition as used for observations, the effective radii simulated and that observed were more comparable. We find that for the single-layer stratiform mixed-phase clouds simulated, process

Simulating mixed-phase Arctic stratus clouds: sensitivity to ice initiation mechanisms

Science.gov (United States)

Sednev, I.; Menon, S.; McFarquhar, G.

2009-07-01

The importance of Arctic mixed-phase clouds on radiation and the Arctic climate is well known. However, the development of mixed-phase cloud parameterization for use in large scale models is limited by lack of both related observations and numerical studies using multidimensional models with advanced microphysics that provide the basis for understanding the relative importance of different microphysical processes that take place in mixed-phase clouds. To improve the representation of mixed-phase cloud processes in the GISS GCM we use the GISS single-column model coupled to a bin resolved microphysics (BRM) scheme that was specially designed to simulate mixed-phase clouds and aerosol-cloud interactions. Using this model with the microphysical measurements obtained from the DOE ARM Mixed-Phase Arctic Cloud Experiment (MPACE) campaign in October 2004 at the North Slope of Alaska, we investigate the effect of ice initiation processes and Bergeron-Findeisen process (BFP) on glaciation time and longevity of single-layer stratiform mixed-phase clouds. We focus on observations taken during 9-10 October, which indicated the presence of a single-layer mixed-phase clouds. We performed several sets of 12-h simulations to examine model sensitivity to different ice initiation mechanisms and evaluate model output (hydrometeors' concentrations, contents, effective radii, precipitation fluxes, and radar reflectivity) against measurements from the MPACE Intensive Observing Period. Overall, the model qualitatively simulates ice crystal concentration and hydrometeors content, but it fails to predict quantitatively the effective radii of ice particles and their vertical profiles. In particular, the ice effective radii are overestimated by at least 50%. However, using the same definition as used for observations, the effective radii simulated and that observed were more comparable. We find that for the single-layer stratiform mixed-phase clouds simulated, process of ice phase initiation

Exchange reaction between hydrogen and deuterium. II - Proposal for an heterogeneous initiation mechanism of gaseous phase reactions

Energy Technology Data Exchange (ETDEWEB)

Marteau, Chantal; Gaillard-Cusin, Francoise; James, Henri [Centre National de la Recherche Scientifique, 45 - Orleans-la-Source (France). Centre de Recherches sur la Chimie de Combustion et des Hautes Temperatures

1978-05-01

Investigation of experimental data related to evolution period exhibited by H/sub 2/-D/sub 2/ exchange process requires to take into account the variation against time of every atomic species -adsorbed or not- implied in the reaction mechanism. The formation of first chain carriers involves: - chemisorption of either gaseous reactant on the surface active centres (..sigma..), e.g.: ..sigma.. + 1/2 H/sub 2/ reversible ..sigma..H; - consecutive generation of atomic species through hetero-homogeneous transfer between chemisorbed species (..sigma..H) and gaseous molecules: ..sigma..H+H/sub 2/..--> sigma..+H/sub 2/+H/sup 0/, ..sigma..H+D/sub 2/..--> sigma..+HD+D/sup 0/. Therefore, it can be shown that the heterogeneous initiation process of a gas phase reaction identifies to a chain linear mechanism. Such an heterogeneous sequence conditions the further proceeding of the homogeneous chain reaction; both evolutions being kinematically connected. Rate constant of hydrogen adsorption on silica glass: ksub(a1) approximately 10/sup 14/ exp(-47/RT)Isup(0,5).molesup(-0,5).S/sup -1/ has been evaluated.

AFM and SEM-FEG study on fundamental mechanisms leading to fatigue crack initiation

Czech Academy of Sciences Publication Activity Database

Man, Jiří; Valtr, M.; Petrenec, Martin; Dluhoš, J.; Kuběna, Ivo; Obrtlík, Karel; Polák, Jaroslav

2015-01-01

Roč. 76, JUL (2015), s. 11-18 ISSN 0142-1123 R&D Projects: GA ČR(CZ) GAP108/10/2371; GA MŠk(CZ) ED1.1.00/02.0068; GA ČR(CZ) GA13-23652S Institutional support: RVO:68081723 Keywords : fatigue crack initiation * 316L austenitic steel * atomic force microscopy * extrusion * intrusion Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 2.162, year: 2015

Sensitivity of the Reaction Mechanism of the Ozone Depletion Events during the Arctic Spring on the Initial Atmospheric Composition of the Troposphere

Directory of Open Access Journals (Sweden)

Le Cao

2016-09-01

Full Text Available Ozone depletion events (ODEs during the Arctic spring have been investigated since the 1980s. It was found that the depletion of ozone is highly associated with the release of halogens, especially bromine containing compounds. These compounds originate from various substrates such as the ice/snow-covered surfaces in Arctic. In the present study, the dependence of the mixing ratios of ozone and principal bromine species during ODEs on the initial composition of the Arctic atmospheric boundary layer was investigated by using a concentration sensitivity analysis. This analysis was performed by implementing a reaction mechanism representing the ozone depletion and halogen release in the box model KINAL (KInetic aNALysis of reaction mechanics. The ratios between the relative change of the mixing ratios of particular species such as ozone and the variation in the initial concentration of each atmospheric component were calculated, which indicate the relative importance of each initial species in the chemical kinetic system. The results of the computations show that the impact of various chemical species is different for ozone and bromine containing compounds during the depletion of ozone. It was found that CH3CHO critically controls the time scale of the complete removal of ozone. However, the rate of the ozone loss and the maximum values of bromine species are only slightly influenced by the initial value of CH3CHO. In addition, according to the concentration sensitivity analysis, the reduction of initial Br2 was found to cause a significant retardant of the ODE while the initial mixing ratio of HBr exerts minor influence on both ozone and bromine species. In addition, it is also interesting to note that the increase of C2H2 would significantly raise the amount of HOBr and Br in the atmosphere while the ozone depletion is hardly changed.

Time-varying properties of renal autoregulatory mechanisms

DEFF Research Database (Denmark)

Zou, Rui; Cupples, Will A; Yip, K P

2002-01-01

In order to assess the possible time-varying properties of renal autoregulation, time-frequency and time-scaling methods were applied to renal blood flow under broad-band forced arterial blood pressure fluctuations and single-nephron renal blood flow with spontaneous oscillations obtained from...... normotensive (Sprague-Dawley, Wistar, and Long-Evans) rats, and spontaneously hypertensive rats. Time-frequency analyses of normotensive and hypertensive blood flow data obtained from either the whole kidney or the single-nephron show that indeed both the myogenic and tubuloglomerular feedback (TGF) mechanisms...... have time-varying characteristics. Furthermore, we utilized the Renyi entropy to measure the complexity of blood-flow dynamics in the time-frequency plane in an effort to discern differences between normotensive and hypertensive recordings. We found a clear difference in Renyi entropy between...

Interaction effects between internal governance mechanisms on the components of initial returns during the IPO

Directory of Open Access Journals (Sweden)

Mediha Mezhoud

2012-12-01

Full Text Available Our work provides an analysis of the interaction effects between internal governance mechanisms on the components of initial returns during the listing period. The application of multivariate regressions on a sample of 110 IPO French companies during 2005-2010, has allowed us to conclude that the different interactions between these mechanisms significantly influence the level of under / overpricing. Indeed, the positive relationship between internal governance mechanisms and overpricing reflects a substitutability relationship. In contrast, the complementarity effect comes from the negative relationship characterizing the combination of governance mechanisms and the underpricing. Thus, the interactions effects between institutional ownership, board structure and under / overpricing are not conforming to the existence of a complementarity or substitutability relationship between these variables given the absence of a significant combination between these variables

Student Understanding of Time Dependence in Quantum Mechanics

Science.gov (United States)

Emigh, Paul J.; Passante, Gina; Shaffer, Peter S.

2015-01-01

The time evolution of quantum states is arguably one of the more difficult ideas in quantum mechanics. In this article, we report on results from an investigation of student understanding of this topic after lecture instruction. We demonstrate specific problems that students have in applying time dependence to quantum systems and in recognizing…

Married Thai Working Mothers: Coping with Initial Part-Time Doctoral Study

Science.gov (United States)

Thinnam, Thanit

2011-01-01

Advanced educational attainment can "grow" a career. But acquiring a doctoral qualification adds study to existing work and family responsibilities, especially for women. This phenomenological research explores the experiences of eight Thai working mothers enrolled in the initial stage of part-time doctoral programs in Thailand. A…

Public views on a wait time management initiative: a matter of communication.

Science.gov (United States)

Bruni, Rebecca A; Laupacis, Andreas; Levinson, Wendy; Martin, Douglas K

2010-08-05

Many countries have tried to reduce waiting times for health care through formal wait time reduction strategies. Our paper describes views of members of the public about a wait time management initiative--the Ontario Wait Time Strategy (OWTS) (Canada). Scholars and governmental reports have advocated for increased public involvement in wait time management. We provide empirically derived recommendations for public engagement in a wait time management initiative. Two qualitative studies: 1) an analysis of all emails sent by the public to the (OWTS) email address; and 2) in-depth interviews with members of the Ontario public. Email correspondents and interview participants supported the intent of the OWTS. However they wanted more information about the Strategy and its actions. Interview participants did not feel they were sufficiently made aware of the Strategy and email correspondents requested additional information beyond what was offered on the Strategy's website. Moreover, the email correspondents believed that some of the information that was provided on the Strategy's website and through the media was inaccurate, misleading, and even dishonest. Interview participants strongly supported public involvement in the OWTS priority setting. Findings suggest the public wanted increased communication from and with the OWTS. Effective communication can facilitate successful public engagement, and in turn fair and legitimate priority setting. Based on the study's findings we developed concrete recommendations for improving public involvement in wait time management.

Classical and quantum-mechanical axioms with the higher time derivative formalism

International Nuclear Information System (INIS)

Kamalov, Timur

2013-01-01

A Newtonian mechanics model is essentially the model of a point body in an inertial reference frame. How to describe extended bodies in non-inertial (vibration) reference frames with the random initial conditions? One of the most generalized ways of descriptions (known as the higher derivatives formalism) consists in taking into account the infinite number of the higher temporal derivatives of the coordinates in the Lagrange function. Such formalism describing physical objects in the infinite dimensions space does not contradict to the quantum mechanics and infinite dimensions Hilbert space.

PAH growth initiated by propargyl addition: Mechanism development and computational kinetics

KAUST Repository

Raj, Abhijeet Dhayal

2014-04-24

Polycyclic aromatic hydrocarbon (PAH) growth is known to be the principal pathway to soot formation during fuel combustion, as such, a physical understanding of the PAH growth mechanism is needed to effectively assess, predict, and control soot formation in flames. Although the hydrogen abstraction C2H2 addition (HACA) mechanism is believed to be the main contributor to PAH growth, it has been shown to under-predict some of the experimental data on PAHs and soot concentrations in flames. This article presents a submechanism of PAH growth that is initiated by propargyl (C 3H3) addition onto naphthalene (A2) and the naphthyl radical. C3H3 has been chosen since it is known to be a precursor of benzene in combustion and has appreciable concentrations in flames. This mechanism has been developed up to the formation of pyrene (A4), and the temperature-dependent kinetics of each elementary reaction has been determined using density functional theory (DFT) computations at the B3LYP/6-311++G(d,p) level of theory and transition state theory (TST). H-abstraction, H-addition, H-migration, β-scission, and intramolecular addition reactions have been taken into account. The energy barriers of the two main pathways (H-abstraction and H-addition) were found to be relatively small if not negative, whereas the energy barriers of the other pathways were in the range of (6-89 kcal·mol-1). The rates reported in this study may be extrapolated to larger PAH molecules that have a zigzag site similar to that in naphthalene, and the mechanism presented herein may be used as a complement to the HACA mechanism to improve prediction of PAH and soot formation. © 2014 American Chemical Society.

Piezoelectrically Initiated Pyrotechnic Igniter

Science.gov (United States)

Quince, Asia; Dutton, Maureen; Hicks, Robert; Burnham, Karen

2013-01-01

This innovation consists of a pyrotechnic initiator and piezoelectric initiation system. The device will be capable of being initiated mechanically; resisting initiation by EMF, RF, and EMI (electromagnetic field, radio frequency, and electromagnetic interference, respectively); and initiating in water environments and space environments. Current devices of this nature are initiated by the mechanical action of a firing pin against a primer. Primers historically are prone to failure. These failures are commonly known as misfires or hang-fires. In many cases, the primer shows the dent where the firing pin struck the primer, but the primer failed to fire. In devices such as "T" handles, which are commonly used to initiate the blowout of canopies, loss of function of the device may result in loss of crew. In devices such as flares or smoke generators, failure can result in failure to spot a downed pilot. The piezoelectrically initiated ignition system consists of a pyrotechnic device that plugs into a mechanical system (activator), which on activation, generates a high-voltage spark. The activator, when released, will strike a stack of electrically linked piezo crystals, generating a high-voltage, low-amperage current that is then conducted to the pyro-initiator. Within the initiator, an electrode releases a spark that passes through a pyrotechnic first-fire mixture, causing it to combust. The combustion of the first-fire initiates a primary pyrotechnic or explosive powder. If used in a "T" handle, the primary would ramp the speed of burn up to the speed of sound, generating a shock wave that would cause a high explosive to go "high order." In a flare or smoke generator, the secondary would produce the heat necessary to ignite the pyrotechnic mixture. The piezo activator subsystem is redundant in that a second stack of crystals would be struck at the same time with the same activation force, doubling the probability of a first strike spark generation. If the first

Comparative genomic analysis of translation initiation mechanisms for genes lacking the Shine–Dalgarno sequence in prokaryotes

KAUST Repository

Nakagawa, So

2017-02-15

In prokaryotes, translation initiation is believed to occur through an interaction between the 3\\' tail of a 16S rRNA and a corresponding Shine-Dalgarno (SD) sequence in the 5\\' untranslated region (UTR) of an mRNA. However, some genes lack SD sequences (non-SD genes), and the fraction of non-SD genes in a genome varies depending on the prokaryotic species. To elucidate non-SD translation initiation mechanisms in prokaryotes from an evolutionary perspective, we statistically examined the nucleotide frequencies around the initiation codons in non-SD genes from 260 prokaryotes (235 bacteria and 25 archaea). We identified distinct nucleotide frequency biases upstream of the initiation codon in bacteria and archaea, likely because of the presence of leaderless mRNAs lacking a 5\\' UTR. Moreover, we observed overall similarities in the nucleotide patterns between upstream and downstream regions of the initiation codon in all examined phyla. Symmetric nucleotide frequency biases might facilitate translation initiation by preventing the formation of secondary structures around the initiation codon. These features are more prominent in species\\' genomes that harbor large fractions of non-SD sequences, suggesting that a reduced stability around the initiation codon is important for efficient translation initiation in prokaryotes.

Comparative genomic analysis of translation initiation mechanisms for genes lacking the Shine–Dalgarno sequence in prokaryotes

KAUST Repository

Nakagawa, So; Niimura, Yoshihito; Gojobori, Takashi

2017-01-01

In prokaryotes, translation initiation is believed to occur through an interaction between the 3' tail of a 16S rRNA and a corresponding Shine-Dalgarno (SD) sequence in the 5' untranslated region (UTR) of an mRNA. However, some genes lack SD sequences (non-SD genes), and the fraction of non-SD genes in a genome varies depending on the prokaryotic species. To elucidate non-SD translation initiation mechanisms in prokaryotes from an evolutionary perspective, we statistically examined the nucleotide frequencies around the initiation codons in non-SD genes from 260 prokaryotes (235 bacteria and 25 archaea). We identified distinct nucleotide frequency biases upstream of the initiation codon in bacteria and archaea, likely because of the presence of leaderless mRNAs lacking a 5' UTR. Moreover, we observed overall similarities in the nucleotide patterns between upstream and downstream regions of the initiation codon in all examined phyla. Symmetric nucleotide frequency biases might facilitate translation initiation by preventing the formation of secondary structures around the initiation codon. These features are more prominent in species' genomes that harbor large fractions of non-SD sequences, suggesting that a reduced stability around the initiation codon is important for efficient translation initiation in prokaryotes.

On time in quantum mechanics

International Nuclear Information System (INIS)

Vona, Nicola

2014-01-01

Although time measurements are routinely performed in laboratories, their theoretical description is still an open problem. Similarly, also the validity and the status of the energy-time uncertainty relation is unsettled. In the first part of this work the necessity of positive operator valued measures (POVM) as descriptions of every quantum experiment is reviewed, as well as the suggestive role played by the probability current in time measurements. Furthermore, it is shown that no POVM exists, which approximately agrees with the probability current on a very natural set of wave functions; nevertheless, the choice of the set is crucial, and on more restrictive sets the probability current does provide a good arrival time prediction. Some ideas to experimentally detect quantum effects in time measurements are discussed. In the second part of the work the energy-time uncertainty relation is considered, in particular for a model of alpha decay for which the variance of the energy can be calculated explicitly, and the variance of time can be estimated. This estimate is tight for systems with long lifetimes, in which case the uncertainty relation is shown to be satisfied. Also the linewidth-lifetime relation is shown to hold, but contrary to the common expectation, it is found that the two relations behave independently, and therefore it is not possible to interpret one as a consequence of the other. To perform the mentioned analysis quantitative scattering estimates are necessary. To this end, bounds of the form parallel 1 R e -iHt ψ parallel (2)/(2)≤Ct -3 have been derived, where ψ denotes the initial state, H the Hamiltonian, R a positive constant, and C is explicitly known. As intermediate step, bounds on the derivatives of the S-matrix in the form parallel 1 K S (n) parallel ∞ ≤C n,K have been established, with n=1,2,3, and the constants C n,K explicitly known.

Antiretroviral treatment initiation does not differentially alter neurocognitive functioning over time in youth with behaviorally acquired HIV.

Science.gov (United States)

Nichols, Sharon L; Bethel, James; Kapogiannis, Bill G; Li, Tiandong; Woods, Steven P; Patton, E Doyle; Ren, Weijia; Thornton, Sarah E; Major-Wilson, Hanna O; Puga, Ana M; Sleasman, John W; Rudy, Bret J; Wilson, Craig M; Garvie, Patricia A

2016-04-01

Although youth living with behaviorally acquired HIV (YLWH) are at risk for cognitive impairments, the relationship of impairments to HIV and potential to improve with antiretroviral therapy (ART) are unclear. This prospective observational study was designed to examine the impact of initiation and timing of ART on neurocognitive functioning in YLWH in the Adolescent Medicine Trials Network for HIV/AIDS Interventions. Treatment naïve YLWH age 18-24 completed baseline and four additional assessments of attention/working memory, complex executive, and motor functioning over 3 years. Group 1 co-enrolled in an early ART initiation study and initiated ART at enrollment CD4 >350 (n = 56); group 2 had CD4 >350 and were not initiating ART (n = 66); group 3 initiated ART with CD4 treatment guidelines at the time. Treatment was de-intensified to boosted protease inhibitor monotherapy at 48 weeks for those in group 1 with suppressed viral load. Covariates included demographic, behavioral, and medical history variables. Analyses used hierarchical linear modeling. All groups showed improved performance with peak at 96 weeks in all three functional domains. Trajectories of change were not significantly associated with treatment, timing of treatment initiation, or ART de-intensification. Demographic variables and comorbidities were associated with baseline functioning but did not directly interact with change over time. In conclusion, YLWH showed improvement in neurocognitive functioning over time that may be related to practice effects and nonspecific impact of study participation. Neither improvement nor decline in functioning was associated with timing of ART initiation or therapy de-intensification.

Student understanding of time dependence in quantum mechanics

Directory of Open Access Journals (Sweden)

Paul J. Emigh

2015-09-01

Full Text Available [This paper is part of the Focused Collection on Upper Division Physics Courses.] The time evolution of quantum states is arguably one of the more difficult ideas in quantum mechanics. In this article, we report on results from an investigation of student understanding of this topic after lecture instruction. We demonstrate specific problems that students have in applying time dependence to quantum systems and in recognizing the key role of the energy eigenbasis in determining the time dependence of wave functions. Through analysis of student responses to a set of four interrelated tasks, we categorize some of the difficulties that underlie common errors. The conceptual and reasoning difficulties that have been identified are illustrated through student responses to four sets of questions administered at different points in a junior-level course on quantum mechanics. Evidence is also given that the problems persist throughout undergraduate instruction and into the graduate level.

Public views on a wait time management initiative: a matter of communication

Directory of Open Access Journals (Sweden)

Laupacis Andreas

2010-08-01

Full Text Available Abstract Background Many countries have tried to reduce waiting times for health care through formal wait time reduction strategies. Our paper describes views of members of the public about a wait time management initiative - the Ontario Wait Time Strategy (OWTS (Canada. Scholars and governmental reports have advocated for increased public involvement in wait time management. We provide empirically derived recommendations for public engagement in a wait time management initiative. Methods Two qualitative studies: 1 an analysis of all emails sent by the public to the (OWTS email address; and 2 in-depth interviews with members of the Ontario public. Results Email correspondents and interview participants supported the intent of the OWTS. However they wanted more information about the Strategy and its actions. Interview participants did not feel they were sufficiently made aware of the Strategy and email correspondents requested additional information beyond what was offered on the Strategy's website. Moreover, the email correspondents believed that some of the information that was provided on the Strategy's website and through the media was inaccurate, misleading, and even dishonest. Interview participants strongly supported public involvement in the OWTS priority setting. Conclusions Findings suggest the public wanted increased communication from and with the OWTS. Effective communication can facilitate successful public engagement, and in turn fair and legitimate priority setting. Based on the study's findings we developed concrete recommendations for improving public involvement in wait time management.

Modelling time-dependent mechanical behaviour of softwood using deformation kinetics

DEFF Research Database (Denmark)

Engelund, Emil Tang; Svensson, Staffan

2010-01-01

The time-dependent mechanical behaviour (TDMB) of softwood is relevant, e.g., when wood is used as building material where the mechanical properties must be predicted for decades ahead. The established mathematical models should be able to predict the time-dependent behaviour. However, these models...... are not always based on the actual physical processes causing time-dependent behaviour and the physical interpretation of their input parameters is difficult. The present study describes the TDMB of a softwood tissue and its individual tracheids. A model is constructed with a local coordinate system that follows...... macroscopic viscoelasticity, i.e., the time-dependent processes are to a significant degree reversible....

On the definition of time operator in quantum mechanics

International Nuclear Information System (INIS)

Nowicki, A.A.

1974-01-01

Different approaches to the quantum-mechanical definition of time operator T are briefly discussed. In particular we define the analytic continuation of the time operator and show that one can construct its exact eigenstates. We consider also the case of a relativistic free scalar particle and discuss the notion of proper time operator S. (author)

Determinants of timely initiation of breastfeeding among mothers in Goba Woreda, South East Ethiopia: A cross sectional study

Directory of Open Access Journals (Sweden)

Belachew Tefera

2011-04-01

Full Text Available Abstract Background Although breastfeeding is universal in Ethiopia, ranges of regional differences in timely initiation of breastfeeding have been documented. Initiation of breastfeeding is highly bound to cultural factors that may either enhance or inhibit the optimal practices. The government of Ethiopia developed National Infant and Young Child Feeding Guideline in 2004 and behavior change communications on breast feeding have been going on since then. However, there is a little information on the practice of timely initiation of breast feeding and factors that predict these practices after the implementation of the national guideline. The objective of this study is to determine the prevalence and determinant factors of timely initiation of breastfeeding among mothers in Bale Goba District, South East Ethiopia. Methods A community based cross sectional study was carried out from February to March 2010 using both quantitative and qualitative methods of data collection. A total of 608 mother infant pairs were selected using simple random sampling method and key informants for the in-depth interview were selected conveniently. Descriptive statistics, bivariate analysis and multivariable logistic regression analyses were employed to identify factors associated with timely initiation of breast feeding. Results The prevalence of timely initiation of breastfeeding was 52.4%. Bivariate analysis showed that attendance of formal education, being urban resident, institutional delivery and postnatal counseling on breast feeding were significantly associated with timely initiation of breastfeeding (P Conclusions The practice of timely initiation of breast feeding is low as nearly half the mothers did not start breastfeeding with one hour after delivery. The results suggest that breast feeding behavior change communication especially during the post natal period is critical in promoting optimal practice in the initiation of breast feeding. Rural mothers

Metabolic profiles of flooding-tolerant mechanism in early-stage soybean responding to initial stress.

Science.gov (United States)

Wang, Xin; Zhu, Wei; Hashiguchi, Akiko; Nishimura, Minoru; Tian, Jingkui; Komatsu, Setsuko

2017-08-01

Metabolomic analysis of flooding-tolerant mutant and abscisic acid-treated soybeans suggests that accumulated fructose might play a role in initial flooding tolerance through regulation of hexokinase and phosphofructokinase. Soybean is sensitive to flooding stress, which markedly reduces plant growth. To explore the mechanism underlying initial-flooding tolerance in soybean, mass spectrometry-based metabolomic analysis was performed using flooding-tolerant mutant and abscisic-acid treated soybeans. Among the commonly-identified metabolites in both flooding-tolerant materials, metabolites involved in carbohydrate and organic acid displayed same profile at initial-flooding stress. Sugar metabolism was highlighted in both flooding-tolerant materials with the decreased and increased accumulation of sucrose and fructose, respectively, compared to flooded soybeans. Gene expression of hexokinase 1 was upregulated in flooded soybean; however, it was downregulated in both flooding-tolerant materials. Metabolites involved in carbohydrate/organic acid and proteins related to glycolysis/tricarboxylic acid cycle were integrated. Increased protein abundance of phosphofructokinase was identified in both flooding-tolerant materials, which was in agreement with its enzyme activity. Furthermore, sugar metabolism was pointed out as the tolerant-responsive process at initial-flooding stress with the integration of metabolomics, proteomics, and transcriptomics. Moreover, application of fructose declined the increased fresh weight of plant induced by flooding stress. These results suggest that fructose might be the critical metabolite through regulation of hexokinase and phosphofructokinase to confer initial-flooding stress in soybean.

RecO protein initiates DNA recombination and strand annealing through two alternative DNA binding mechanisms.

Science.gov (United States)

Ryzhikov, Mikhail; Gupta, Richa; Glickman, Michael; Korolev, Sergey

2014-10-17

Recombination mediator proteins (RMPs) are important for genome stability in all organisms. Several RMPs support two alternative reactions: initiation of homologous recombination and DNA annealing. We examined mechanisms of RMPs in both reactions with Mycobacterium smegmatis RecO (MsRecO) and demonstrated that MsRecO interacts with ssDNA by two distinct mechanisms. Zinc stimulates MsRecO binding to ssDNA during annealing, whereas the recombination function is zinc-independent and is regulated by interaction with MsRecR. Thus, different structural motifs or conformations of MsRecO are responsible for interaction with ssDNA during annealing and recombination. Neither annealing nor recombinase loading depends on MsRecO interaction with the conserved C-terminal tail of single-stranded (ss) DNA-binding protein (SSB), which is known to bind Escherichia coli RecO. However, similarly to E. coli proteins, MsRecO and MsRecOR do not dismiss SSB from ssDNA, suggesting that RMPs form a complex with SSB-ssDNA even in the absence of binding to the major protein interaction motif. We propose that alternative conformations of such complexes define the mechanism by which RMPs initiate the repair of stalled replication and support two different functions during recombinational repair of DNA breaks. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

Soft Time-Suboptimal Controlling Structure for Mechanical Systems

DEFF Research Database (Denmark)

Kulczycki, Piotr; Wisniewski, Rafal; Kowalski, Piotr

2004-01-01

The paper presents conception of a soft control structure based on the time-optimal approach. Its parameters are selected in accordance with the rules of the statistical decision theory and additionally it allows to eliminate rapid changes in control values. The object is a basic mechanical system......, with uncertain (also non-stationary) mass treated as a stochastic process. The methodology proposed here is of a universal nature and may easily be applied with respect to other uncertainty elements of timeoptimal controlled mechanical systems....

Incidence and timing of cancer in HIV-infected individuals following initiation of combination antiretroviral therapy.

Science.gov (United States)

Yanik, Elizabeth L; Napravnik, Sonia; Cole, Stephen R; Achenbach, Chad J; Gopal, Satish; Olshan, Andrew; Dittmer, Dirk P; Kitahata, Mari M; Mugavero, Michael J; Saag, Michael; Moore, Richard D; Mayer, Kenneth; Mathews, W Christopher; Hunt, Peter W; Rodriguez, Benigno; Eron, Joseph J

2013-09-01

Cancer is an important cause of morbidity and mortality in individuals infected with human immunodeficiency virus (HIV), but patterns of cancer incidence after combination antiretroviral therapy (ART) initiation remain poorly characterized. We evaluated the incidence and timing of cancer diagnoses among patients initiating ART between 1996 and 2011 in a collaboration of 8 US clinical HIV cohorts. Poisson regression was used to estimate incidence rates. Cox regression was used to identify demographic and clinical characteristics associated with cancer incidence after ART initiation. At initiation of first combination ART among 11 485 patients, median year was 2004 (interquartile range [IQR], 2000-2007) and median CD4 count was 202 cells/mm(3) (IQR, 61-338). Incidence rates for Kaposi sarcoma (KS) and lymphomas were highest in the first 6 months after ART initiation (P cancers combined increased from 416 to 615 cases per 100 000 person-years from 1 to 10 years after ART initiation (average 7% increase per year; 95% confidence interval, 2%-13%). Lower CD4 count at ART initiation was associated with greater risk of KS, lymphoma, and human papillomavirus-related cancer. Calendar year of ART initiation was not associated with cancer incidence. KS and lymphoma rates were highest immediately following ART initiation, particularly among patients with low CD4 cell counts, whereas other cancers increased with time on ART, likely reflecting increased cancer risk with aging. Our results underscore recommendations for earlier HIV diagnosis followed by prompt ART initiation along with ongoing aggressive cancer screening and prevention efforts throughout the course of HIV care.

Regional changes over time in initial virological response rates to combination antiretroviral therapy across Europe

DEFF Research Database (Denmark)

Bannister, W; Kirk, O; Gatell, J

2006-01-01

BACKGROUND: Changes in virologic response to initial combination antiretroviral therapy (cART) over calendar time may indicate improvements in cART or emergence of primary resistance. Regional variations may identify differences in available antiretroviral drugs or patient management. METHODS.......026) and time (P changes were observed (south, P = 0.061; central west, P ....001; north: P = 0.070; east, P = 0.001). CONCLUSIONS: There was some evidence of regional differences in initial virologic response to cART. Improvements over time were observed, suggesting that so far, the effect of primary resistance has not been of sufficient magnitude to prevent increasing suppression...

Controlled time of arrival windows for already initiated energy-neutral continuous descent operations

OpenAIRE

Dalmau Codina, Ramon; Prats Menéndez, Xavier

2017-01-01

Continuous descent operations with controlled times of arrival at one or several metering fixes could enable environmentally friendly procedures without compromising terminal airspace capacity. This paper focuses on controlled time of arrival updates once the descent has been already initiated, assessing the feasible time window (and associated fuel consumption) of continuous descent operations requiring neither thrust nor speed-brake usage along the whole descent (i.e. only elevator control ...

Interdependence of initial cell density, drug concentration and exposure time revealed by real-time impedance spectroscopic cytotoxicity assay

DEFF Research Database (Denmark)

Caviglia, Claudia; Zor, Kinga; Canepa, Silvia

2015-01-01

We investigated the combined effect of the initial cell density (12 500, 35 000, 75 000, and 100 000 cells cm−2) and concentration of the anti-cancer drug doxorubicin on HeLa cells by performing timedependent cytotoxicity assays using real-time electrochemical impedance spectroscopy. A correlation...... between the rate of cell death and the initial cell seeding density was found at 2.5 μM doxorubicin concentration, whereas this was not observed at 5 or 100 μM. By sensing the changes in the cell–substrate interaction using impedance spectroscopy under static conditions, the onset of cytotoxicity...... was observed 5 h earlier than when using a standard colorimetric end-point assay (MTS) which measures changes in the mitochondrial metabolism. Furthermore, with the MTS assay no cytotoxicity was observed after 15 h of incubation with 2.5 μM doxorubicin, whereas the impedance showed at this time point cell...

The initial time-course of headache in patients with spontaneous subarachnoid hemorrhage

NARCIS (Netherlands)

Čomić, Hata; Rinkel, Gabriel J.E.; Vergouwen, Mervyn D.I.

2017-01-01

Background If acute severe headache disappears early after its onset, the question arises whether subarachnoid hemorrhage (SAH) should still be ruled out. We studied the initial time-course and minimal duration of headache in a consecutive series of neurologically intact patients with spontaneous

Initial deposition mechanism of electroless nickel plating on AZ91D magnesium alloys

International Nuclear Information System (INIS)

Song, Y.; Shan, D.; Han, E.

2006-01-01

The pretreatment processes and initial deposition mechanism of electroless nickel plating on AZ91D magnesium alloy were investigated by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The results showed that alkaline cleaning could remove the greases and oils from the substrate surface. Acid etching could wipe off the metal chippings and oxides. The hydrofluoric acid activating process which could improve the adhesion of coating to substrate played a key role in the subsequent process of electroless nickel plating. The nickel coating was deposited preferentially on the primary α phase and then spread to the eutectic α phase and β phase. The nickel initially nucleated on the primary α phase by a replacement reaction, then grew depending on the autocatalysis function of nickel. The coating on the β phase displayed better adhesion than that on the α phase due to the nails fixing effect. (author)

Perceptions of Pediatric Nephrologists regarding Timing of Dialysis Initiation in Children in Canada

Directory of Open Access Journals (Sweden)

Jeremy A. Saban

2016-07-01

Full Text Available Background: Significant practice variation exists in Canada with respect to timing of dialysis initiation in children. In the absence of evidence to guide practice, physicians' perceptions may significantly influence decision-making. Objective: The objectives of this study are to (1 evaluate Canadian pediatric nephrologists' perceptions regarding dialysis initiation in children with chronic kidney disease (CKD and (2 determine the factors guiding practice that may contribute to practice variation across Canada. Design: This study was a cross-sectional online survey. Setting: This study was done in academic pediatric nephrology centers in Canada. Participants: The participants of this study are pediatric nephrologists. Measurements and methods: An anonymous web-based survey was administered to pediatric nephrologists in Canada to evaluate perspectives and practice patterns regarding timing of dialysis initiation. We also explored the importance of estimated glomerular filtration rate (eGFR vs. symptoms and the role of patient and provider factors influencing decisions. Results: Thirty-five nephrologists (59 % completed the survey. Most respondents care for advanced CKD patients in a multidisciplinary clinic (86 % and no centers have a formal policy on timing of dialysis initiation. Seventy-five percent of centers follow 30 patients. Discussions about dialysis initiation are generally informal (75 % and the decision to start is made by the nephrologist (37 % or a team (57 %. Fifty percent agreed GFR was important when deciding when to initiate dialysis, 41 % were neutral, and 9 % disagreed. Variability exists in the threshold that nephrologists considered early (vs. late dialysis initiation: >20 (21 %, >15 (38 %, >12 (26 %, and >10 ml/min/1.73 m 2 (12 %. Practitioners however typically start dialysis in asymptomatic patients at eGFRs of 7–9 (9 %, 10–11 (41 %, 12–14 (38 %, and 15–19 (6 % ml/min/1.73 m 2 . Patient factors important in the

Quantum mechanics, stochasticity and space-time

International Nuclear Information System (INIS)

Ramanathan, R.

1986-04-01

An extended and more rigorous version of a recent proposal for an objective stochastic formulation of quantum mechanics along with its extension to the relativistic case without spin is presented. The relativistic Klein-Gordon equation is shown to be a particular form of the relativistic Kolmogorov-Fokker-Planck equation which is derived from a covariant formulation of the Chapman-Kolmogorov condition. Complexification of probability amplitudes is again achieved only through a conformal rotation of Minkowski space-time M 4 . (author)

Initiation Processes of the Tropical Intraseasonal Variability Simulated in an Aqua-Planet Experiment: What is the Intrinsic Mechanism for MJO Onset?

Science.gov (United States)

Takasuka, Daisuke; Satoh, Masaki; Miyakawa, Tomoki; Miura, Hiroaki

2018-04-01

To understand the intrinsic onset mechanism of the Madden-Julian Oscillation (MJO), we simulated a set of initiation processes of MJO-like disturbances in 10 year aqua-planet experiments using a global atmospheric model with a 56 km horizontal mesh and an explicit cloud scheme. Under a condition with a zonally nonuniform sea surface temperature (SST) in the tropics, we reproduced MJO-like disturbances over the western warm pool region. The lagged-composite analysis of detected MJO-like disturbances clarifies the time sequence of three-dimensional dynamic and moisture fields prior to the onset. We found that midtropospheric moistening, a condition that is favorable for deep convection, is particularly obvious in the initiation region 5-9 days before onset. The moistening is caused by two-dimensional horizontal advection due to cross-equatorial shallow circulations associated with mixed Rossby-gravity waves, as well as anomalous poleward flows of a negative Rossby response to suppressed convection. When the midtroposphere is sufficiently moistened, lower tropospheric signals of circumnavigating Kelvin waves trigger active convection. The surface latent heat flux (LHF) feedback contributes to the initial stages of convective organization, while the cloud-radiation feedback contributes to later stages. Sensitivity experiments suggest that circumnavigating Kelvin waves regulate the period of MJO-like disturbances because of efficient convective triggering and that the LHF feedback contributes to rapid convective organization. However, the experiments also reveal that both conditions are not necessary for the existence of MJO-like disturbances. Implications for the relevance of these mechanisms for MJO onset are also discussed.

Initial value problem for plasma oscillations

International Nuclear Information System (INIS)

Li, J.; Spies, G.O.

1991-01-01

The solution of the initial value problem for the linearized one-dimensional electron Vlasov--Poisson equations in a field-free homogeneous equilibrium is examined for small and for large ratios κ of Debye length and wavelength, assuming initial perturbing distribution functions varying on the same velocity scale as the equilibrium. Previously known approximations of the initial evolution (which, unlike the time-asymptotic one, does not depend on analyticity assumptions) are extended to longer times, and to arbitrary stable or unstable equilibria: In the quasifluid regime (small κ), the electric field, within an additive error O(κ 2 ), and independently of the initial data, performs an oscillation near the plasma frequency that corresponds to an eigenmode if it is unstable or marginal, but to an approximate eigenmode arising from the continuous spectrum otherwise. If other unstable or marginal modes are present, these influence only the time-asymptotic behavior because their amplitudes are O(κ 2 ) initially. In the ballistic regime (large κ), there are no instabilities and the perturbing density, now within an error O(κ -2 ), is the Fourier transform of the initial perturbing distribution function, thus following an arbitrary decay law that is independent of the equilibrium. The errors are shown to be time-independent, implying that either approximation is relevant at least until the perturbing density has essentially damped out. Hence the dominating damping mechanism (in the stable case) is Landau damping if κ much-lt 1, but ballistic particle mixing if κ much-gt 1

Predictors of Timely Prenatal Care Initiation and Adequate Utilization in a Sample of Late Adolescent Texas Latinas.

Science.gov (United States)

Torres, Rosamar; Kehoe, Priscilla; Heilemann, MarySue V

2018-03-01

Little is known of late adolescent Texas Latinas' prenatal care perceptions or how these perceptions predict timely prenatal care initiation or adequate utilization. Hence, the purpose of this study is to describe and compare these perceptions between participants with timely versus late prenatal care initiation and adequate, intermediate, and inadequate prenatal care utilization; and to determine predictors of timely prenatal care initiation and adequate utilization. Fifty-four postpartum Latinas were recruited through social media. Eligibility criteria were 18 to 21 years old, Texas-born, primiparous, uncomplicated pregnancy/delivery, and English literate. Prenatal care perceptions were measured with the Revised Better Babies Survey and Access Barriers to Care Index. Participants had favorable views of prenatal care benefits; however, not living with the baby's father predicted inadequate prenatal care, Wald χ 2 (1) = 4.93, p = .026. Perceived benefits of timely and adequate prenatal care predicted timely prenatal care initiation, χ 2 (1) = 7.47, p = .006. Self-reported depression during pregnancy predicted timely entry into prenatal care, χ 2 (1) = 4.73, p = .03. Participants' positive prenatal care perceptions did not predict adequate prenatal care utilization, indicating that barriers serve as powerful obstacles in late adolescent Texas Latinas.

Physical mechanism of initial breakdown pulses and narrow bipolar events in lightning discharges

Science.gov (United States)

Silva, Caitano L.; Pasko, Victor P.

2015-05-01

To date the true nature of initial breakdown pulses (IBPs) and narrow bipolar events (NBEs) in lightning discharges remains a mystery. Recent experimental evidence has correlated IBPs to the initial development of lightning leaders inside the thundercloud. NBE wideband waveforms resemble classic IBPs in both amplitude and duration. Most NBEs are quite peculiar in the sense that very frequently they occur in isolation from other lightning processes. The remaining fraction, 16% of positive polarity NBEs, according to Wu et al. (2014), happens as the first event in an otherwise regular intracloud lightning discharge. These authors point out that the initiator type of NBEs has no difference with other NBEs that did not start lightning, except for the fact that they occur deeper inside the thunderstorm (i.e., at lower altitudes). In this paper, we propose a new physical mechanism to explain the source of both IBPs and NBEs. We propose that IBPs and NBEs are the electromagnetic transients associated with the sudden (i.e., stepwise) elongation of the initial negative leader extremity in the thunderstorm electric field. To demonstrate our hypothesis a novel computational/numerical model of the bidirectional lightning leader tree is developed, consisting of a generalization of electrostatic and transmission line approximations found in the literature. Finally, we show how the IBP and NBE waveform characteristics directly reflect the properties of the bidirectional lightning leader (such as step length, for example) and amplitude of the thunderstorm electric field.

Time and prediction in quantum cosmology

International Nuclear Information System (INIS)

Hartle, J.B.

1989-01-01

In this paper a generalized quantum mechanics for cosmological spacetimes is suggested in which no variable plays the special role of the time of familiar quantum mechanics. In this generalization the central role of time in familiar quantum mechanics arises, not at a fundamental aspect of the formalism, but rather as an approximation appropriate to those initial conditions of the universe which lead to classical spacetime when it is large

On the initial conditions of time-dependent mean-field equations of evolution. Pt. 2

International Nuclear Information System (INIS)

Troudet, T.; Paris-11 Univ., 91 - Orsay

1986-01-01

We analyze the problem so far untouched of determining the initial mean-field wavefunction in the context of zero-temperature mean-field descriptions of time-dependent expectation values and quantum fluctuations of nuclear observables. The nucleus, at zero temperature, is taken to be in a low-lying excited many-body eigenstate and is approximated by the corresponding RPA wavefunction as a continuous superposition of coherent states (i.e. Slater determinants). A generating function Gsub(A)(lambda) for time-dependent expectation values and quantum fluctuations is constructed within the formalism of functional integration. By applying the saddle-point method to the functional action of Gsub(A)(lambda) and then taking its lambda-derivatives, we recover the well-known TDHF theory and propose a simple determination of the initial Slater determinant for an appropriate mean-field description of time-dependent expectation values. The analog mean-field description of quadratic-quantum fluctuations proceeds similarly and in addition includes the contribution of the uncorrelated TDHF-RPA phonons coupled to collective excitations of the initial (static) mean-field configuration. When the collective TDHF-RPA excitations are solely taken into account, we obtain an improved version of the Balian-Veneroni dispersion formula by showing how to determine the initial mean-field wavefunction. By first taking the lambda-derivatives of Gsub(A)(lambda) before applying the saddle-point method, the initial mean-field wavefunction is found to be non-linearly coupled to the mean-field dynamics themselves. In return, and in contrast to the first quantization scheme, these both depend non-trivially upon the observable A being measured so that approximations must be proposed to simplify the resulting mean-field equations. (orig.)

On the role of time in nonrelativistic quantum mechanics

International Nuclear Information System (INIS)

Chattaraj, P.K.; Sannigrahi, A.B.

1994-01-01

It has been didactically analysed that time appears as a parameter in nonrelativistic quantum mechanics. Corresponding Heisenberg's uncertainty principle is discussed. Dynamical behaviour of time and its operator equivalence are generally obtained from analogy and should not be treated at par with other dynamical observables, e.g. momentum. (author). 8 refs

Resolving nanoparticle growth mechanisms from size- and time-dependent growth rate analysis

Science.gov (United States)

Pichelstorfer, Lukas; Stolzenburg, Dominik; Ortega, John; Karl, Thomas; Kokkola, Harri; Laakso, Anton; Lehtinen, Kari E. J.; Smith, James N.; McMurry, Peter H.; Winkler, Paul M.

2018-01-01

Atmospheric new particle formation occurs frequently in the global atmosphere and may play a crucial role in climate by affecting cloud properties. The relevance of newly formed nanoparticles depends largely on the dynamics governing their initial formation and growth to sizes where they become important for cloud microphysics. One key to the proper understanding of nanoparticle effects on climate is therefore hidden in the growth mechanisms. In this study we have developed and successfully tested two independent methods based on the aerosol general dynamics equation, allowing detailed retrieval of time- and size-dependent nanoparticle growth rates. Both methods were used to analyze particle formation from two different biogenic precursor vapors in controlled chamber experiments. Our results suggest that growth rates below 10 nm show much more variation than is currently thought and pin down the decisive size range of growth at around 5 nm where in-depth studies of physical and chemical particle properties are needed.

Effect of Initiation Time of Hydrostatic Pressure Shock on Chromosome Set Doubling of Tetraploidization in Turbot Scophthalmus maximus.

Science.gov (United States)

Zhu, Xiangping; Lin, Zhengmei; Wu, Zhihao; Li, Jiandong; You, Feng

2017-10-01

three-cell stage and cytokinesis only occurred in the blastomere containing DNA. The result of chromosome counting showed that the tetraploidization rate of B group was only 7%. To summarize what had been mentioned above, mechanisms on chromosome set doubling of tetraploid induction would be different with different initiation time of hydrostatic pressure treatment. Chromosome set doubling was mainly due to inhibition of the second mitosis when hydrostatic pressure treatment was performed at prometaphase. Otherwise, chromosome set doubling was mainly due to inhibition of the first nuclear division when hydrostatic pressure treatment was performed at anaphase. Induction efficiency of tetraploidization resulted from inhibition of the second cleavage was higher than which resulted from inhibition of the first nuclear division. This study was the first to reveal biological mechanisms on the two viewpoints of chromosome set doubling through effect of initiation time of hydrostatic pressure treatment on chromosome set doubling in tetraploid induction.

Strain-rate effect on initial crush stress of irregular honeycomb under dynamic loading and its deformation mechanism

Science.gov (United States)

Wang, Peng; Zheng, Zhijun; Liao, Shenfei; Yu, Jilin

2018-02-01

The seemingly contradictory understandings of the initial crush stress of cellular materials under dynamic loadings exist in the literature, and a comprehensive analysis of this issue is carried out with using direct information of local stress and strain. Local stress/strain calculation methods are applied to determine the initial crush stresses and the strain rates at initial crush from a cell-based finite element model of irregular honeycomb under dynamic loadings. The initial crush stress under constant-velocity compression is identical to the quasi-static one, but less than the one under direct impact, i.e. the initial crush stresses under different dynamic loadings could be very different even though there is no strain-rate effect of matrix material. A power-law relation between the initial crush stress and the strain rate is explored to describe the strain-rate effect on the initial crush stress of irregular honeycomb when the local strain rate exceeds a critical value, below which there is no strain-rate effect of irregular honeycomb. Deformation mechanisms of the initial crush behavior under dynamic loadings are also explored. The deformation modes of the initial crush region in the front of plastic compaction wave are different under different dynamic loadings.

The Timing of Initiating Complementary Feeding in Preterm Infants and Its Effect on Overweight

NARCIS (Netherlands)

Vissers, K.M.; Feskens, E.J.M.; Goudoever, van J.B.; Janse, A.

2018-01-01

Background:
What is the appropriate time to start complementary feeding for preterm infants? The answer to this question is yet under debate. The timing of initiating complementary feeding may be associated with overweight in
term infants. This systematic review aimed to study the effect

The Jigsaw Puzzle of mRNA Translation Initiation in Eukaryotes: A Decade of Structures Unraveling the Mechanics of the Process.

Science.gov (United States)

Hashem, Yaser; Frank, Joachim

2018-03-01

Translation initiation in eukaryotes is a highly regulated and rate-limiting process. It results in the assembly and disassembly of numerous transient and intermediate complexes involving over a dozen eukaryotic initiation factors (eIFs). This process culminates in the accommodation of a start codon marking the beginning of an open reading frame at the appropriate ribosomal site. Although this process has been extensively studied by hundreds of groups for nearly half a century, it has been only recently, especially during the last decade, that we have gained deeper insight into the mechanics of the eukaryotic translation initiation process. This advance in knowledge is due in part to the contributions of structural biology, which have shed light on the molecular mechanics underlying the different functions of various eukaryotic initiation factors. In this review, we focus exclusively on the contribution of structural biology to the understanding of the eukaryotic initiation process, a long-standing jigsaw puzzle that is just starting to yield the bigger picture. Expected final online publication date for the Annual Review of Biophysics Volume 47 is May 20, 2018. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

On the problem of time in quantum mechanics

Science.gov (United States)

Bauer, M.

2017-05-01

The problem of time in quantum mechanics (QM) concerns the fact that in the Schrödinger equation time is a parameter, not an operator. Pauli's objection to a time-energy uncertainty relation analogue to the position-momentum one, conjectured by Heisenberg early on, seemed to exclude the existence of such an operator. However Dirac's formulation of an electron's relativistic QM does allow the introduction of a dynamical time operator that is self-adjoint. Consequently, it can be considered as the generator of a unitary transformation of the system, as well as an additional system observable subject to uncertainty. In the present paper these aspects are examined within the standard framework of relativistic QM.

Mechanism of fatigue crack initiation in austenitic stainless steels in light water reactor environments

International Nuclear Information System (INIS)

Chopra, O.K.; Shack, W.J.; Muscara, J.

2003-01-01

This paper examines the mechanism of fatigue crack initiation in austenitic stainless steels (SSs) in light water reactor (LWR) coolant environments. The effects of key material and loading variables on the fatigue lives of wrought and cast austenitic SSs in air and LWR environments have been evaluated. The influence of reactor coolant environments on the formation and growth of fatigue cracks in polished smooth SS specimens is discussed. The results indicate that the fatigue lives of these steels are decreased primarily by the effects of the environment on the growth of cracks <200 μm and, to a lesser extent, on enhanced growth rates of longer cracks. The fracture morphology in the specimens has been characterized. Exploratory fatigue tests were conducted to study the effects of surface micropits or minor differences in the surface oxide on fatigue crack initiation. (author)

Proper-time quantum-mechanics and the Klein paradox

International Nuclear Information System (INIS)

Thaller, B.

1981-01-01

Scattering at high potential-steps is treated in the framework of relativistic proper-time theory. No paradox arises in contrast to Dirac's wavemechanics (''Klein's paradox''); pair creation may happen with a certain probability and may be described as a scattering process with ordinary quantum-mechanical methods. (author)

Sensory-specific clock components and memory mechanisms: investigation with parallel timing.

Science.gov (United States)

Gamache, Pierre-Luc; Grondin, Simon

2010-05-01

A challenge for researchers in the time-perception field is to determine whether temporal processing is governed by a central mechanism or by multiple mechanisms working in concert. Behavioral studies of parallel timing offer interesting insights into the question, although the conclusions fail to converge. Most of these studies focus on the number-of-clocks issue, but the commonality of memory mechanisms involved in time processing is often neglected. The present experiment aims to address a straightforward question: do signals from different modalities marking time intervals share the same clock and/or the same memory resources? To this end, an interval reproduction task involving the parallel timing of two sensory signals presented either in the same modality or in different modalities was conducted. The memory component was tested by manipulating the delay separating the presentation of the target intervals and the moment when the reproduction of one of these began. Results show that there is more variance when only visually marked intervals are presented, and this effect is exacerbated with longer retention delays. Finally, when there is only one interval to process, encoding the interval with signals delivered from two modalities helps to reduce variance. Taken together, these results suggest that the hypothesis stating that there are sensory-specific clock components and memory mechanisms is viable.

Grain boundary defects initiation at the outer surface of dissimilar welds: corrosion mechanism studies

International Nuclear Information System (INIS)

De Bouvier, O.; Yrieix, B.

1995-11-01

Dissimilar welds located on the primary coolant system of the French PWR I plants exhibit grain boundary defects in the true austenitic zones of the first buttering layer. If grain boundaries reach the interface, they can extend to the martensitic band. Those defects are filled with compact oxides. In addition, the ferritic base metal presents some pits along the interface. Nowadays, three mechanisms are proposed to explain the initiation of those defects: stress corrosion cracking, intergranular corrosion and high temperature intergranular oxidation. This paper is dealing with the study of the mechanisms involved in the corrosion phenomenon. Intergranular corrosion tests performed on different materials show that only the first buttering layer, even with some δ ferrite, is sensitized. The results of stress corrosion cracking tests in water solutions show that intergranular cracking is possible on a bulk material representative of the first buttering layer. It is unlikely on actual dissimilar welds where the ferritic base metal protects the first austenitic layer by galvanic coupling. Therefore, the stress corrosion cracking assumption cannot explain the initiation of the defects in aqueous environment. The results of the investigations and of the corrosion studies led to the conclusion that the atmosphere could be the only possible aggressive environment. This conclusion is based on natural atmospheric exposure and accelerated corrosion tests carried out with SO 2 additions in controlled atmosphere. They both induce a severe intergranular corrosion on true sensitized austenitic materials. This corrosion studies cannot conclude definitively on the causes of the defect initiation on field, but they show that the atmospheric corrosion could produce intergranular attacks in the pure austenitic zones of the first buttering layer of the dissimilar welds and that this corrosion is stress assisted. (author). 1 ref., 6 figs., 4 tabs

Mechanism and kinetic properties for the OH-initiated atmospheric oxidation degradation of 9,10-Dichlorophenanthrene

Energy Technology Data Exchange (ETDEWEB)

Dang, Juan; Shi, Xiangli; Zhang, Qingzhu, E-mail: zqz@sdu.edu.cn; Hu, Jingtian; Wang, Wenxing

2015-02-01

Chlorinated polycyclic aromatic hydrocarbons (ClPAHs) have become a serious environmental concern due to their widespread occurrence and dioxin-like toxicities. In this work, the mechanism of the OH-initiated atmospheric oxidation degradation of 9,10-dichlorophenanthrene (9,10-Cl{sub 2}Phe) was investigated by using high-accuracy quantum chemistry calculations. The rate constants of the crucial elementary reactions were determined by the Rice–Ramsperger–Kassel–Marcus (RRKM) theory. The theoretical results were compared with the available experimental data. The main oxidation products are a group of ring-retaining and ring-opening compounds including chlorophenanthrols, 9,10-dichlorophenanthrene-3,4-dione, dialdehydes, chlorophenanthrenequinones, nitro-9,10-Cl{sub 2}Phe and epoxides et al. The overall rate constant of the OH addition reaction is 2.35 × 10{sup −12} cm{sup 3} molecule{sup −1} s{sup −1} at 298 K and 1 atm. The atmospheric lifetime of 9,10-Cl{sub 2}Phe determined by OH radicals is about 5.05 days. This study provides a comprehensive investigation of the OH-initiated oxidation degradation of 9,10-Cl{sub 2}Phe and should contribute to clarifying its atmospheric fate. - Highlights: • We studied a comprehensive mechanism of OH-initiated degradation of 9,10-Cl{sub 2}Phe. • The atmospheric lifetime of 9,10-Cl{sub 2}Phe determined by OH radical is about 5.05 d. • The rate constants of the crucial elementary steps were evaluated. • Water plays an important role in the formation of nitro-9,10-Cl{sub 2}Phe.

Randomised Controlled Trial to determine the appropriate time to initiate peritoneal dialysis after insertion of catheter to minimise complications (Timely PD study

Directory of Open Access Journals (Sweden)

Fassett Robert G

2010-06-01

Full Text Available Abstract Background The most appropriate time to initiate dialysis after surgical insertion of Tenckhoff catheters is not clear in the literature. There is the possibility of peritoneal dialysis (PD complications such as leakage and infection if dialysis is started too soon after insertion. However, much morbidity and expense could be saved by reducing dependency on haemodialysis (HD by earlier initiation of PD post catheter insertion. Previous studies are observational and mostly compare immediate with delayed use. The primary objective is to determine the safest and shortest time interval between surgical placement of a Tenckhoff catheter and starting PD. Methods/Design This is a randomised controlled trial of patients who will start PD after insertion of Tenckhoff catheter at Royal Brisbane and Women's Hospital (RBWH or Rockhampton Base Hospital (RBH who meet the inclusion criteria. Patients will be stratified by site and diabetic status. The patients will be randomised to one of three treatment groups. Group 1 will start PD one week after Tenckhoff catheter insertion, group 2 at two weeks and group 3 at four weeks. Nurses and physicians will be blinded to the randomised allocation. The primary end point is the complication rate (leaks and infection after initiation of PD. Discussion The study will determine the most appropriate time to initiate PD after placement of a Tenckhoff catheter. Trial Registration ACTRN12610000076077

Time correlation between mononucleosis and initial symptoms of MS

Science.gov (United States)

Endriz, John; Ho, Peggy P.

2017-01-01

Objective: To determine the average age of MS onset vs the age at which Epstein-Barr infection has previously occurred and stratify this analysis by sex and the blood level of Epstein-Barr nuclear antigen 1 (EBNA1) antibody. Methods: Using infectious mononucleosis (IM) as a temporal marker in data from the Swedish epidemiologic investigation of MS, 259 adult IM/MS cases were identified and then augmented to account for “missing” childhood data so that the average age of MS onset could be determined for cases binned by age of IM (as stratified by sex and EBNA1 titer level). Results: Mean age of IM vs mean age of MS reveals a positive time correlation for all IM ages (from ∼5 to ∼30 years), with IM-to-MS delay decreasing with increased age. When bifurcated by sex or EBNA1 blood titer levels, males and high-titer subpopulations show even stronger positive time correlation, while females and low-titer populations show negative time correlation in early childhood (long IM/MS delay). The correlation becomes positive in females beyond puberty. Conclusions: IM/MS time correlation implies causality if IM is time random. Alternative confounding models seem implausible, in light of constraints imposed by time-invariant delay observed here. Childhood infection with Epstein-Barr virus (EBV) in females and/or those genetically prone to low EBNA1 blood titers will develop MS slowly. Males and/or high EBNA1-prone develop MS more rapidly following IM infection at all ages. For all, postpubescent EBV infection is critical for the initiation and rapid development of MS. PMID:28271078

Natural time analysis and Tsallis non-additive entropy statistical mechanics.

Science.gov (United States)

Sarlis, N. V.; Skordas, E. S.; Varotsos, P.

2016-12-01

Upon analyzing the seismic data in natural time and employing a sliding natural time window comprising a number of events that would occur in a few months, it has been recently uncovered[1] that a precursory Seismic Electric Signals activity[2] initiates almost simultaneously with the appearance of a minimum in the fluctuations of the order parameter of seismicity [3]. Such minima have been ascertained [4] during periods of the magnitude time series exhibiting long range correlations [5] a few months before all earthquakes of magnitude 7.6 or larger that occurred in the entire Japanese area from 1 January 1984 to 11 March 2011 (the day of the M9 Tohoku-Oki earthquake). Before and after these minima, characteristic changes of the temporal correlations between earthquake magnitudes are observed which cannot be captured by Tsallis non-additive entropy statistical mechanics in the frame of which it has been suggested that kappa distributions arise [6]. Here, we extend the study concerning the existence of such minima in a large area that includes Aegean Sea and its surrounding area which exhibits in general seismo-tectonics [7] different than that of the entire Japanese area. References P. A. Varotsos et al., Tectonophysics, 589 (2013) 116. P. Varotsos and M. Lazaridou, Tectonophysics 188 (1991) 321. P.A. Varotsos et al., Phys Rev E 72 (2005) 041103. N. V. Sarlis et al., Proc Natl Acad Sci USA 110 (2013) 13734. P. A. Varotsos, N. V. Sarlis, and E. S. Skordas, J Geophys Res Space Physics 119 (2014), 9192, doi: 10.1002/2014JA0205800. G. Livadiotis, and D. J. McComas, J Geophys Res 114 (2009) A11105, doi:10.1029/2009JA014352. S. Uyeda et al., Tectonophysics, 304 (1999) 41.

Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics

Institute of Scientific and Technical Information of China (English)

Duan Yao-Yong; Guo Yong-Hui; Wang Wen-Sheng; Qiu Ai-Ci

2005-01-01

A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z-pinch on the Qiangguang-Ⅰ generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power.

Mechanisms of the initial stage of fuel elements degradation of BN reactor fuel assemblies

International Nuclear Information System (INIS)

Zagorul'ko, Yu.I.; Kashcheev, M.V.; Ganichev, N.S.

2015-01-01

On the base of developed calculational technique numerical evaluation is carried out to the time of fuel element fracture in conditions of loss of sodium flow through fuel element jacket. Data on mechanical properties of steel EhK-164 is used in calculations. Calculations are carried out for different conditions of jacket outer surface cooling: by sodium of 1073 K temperature, by boiling sodium and by sodium in condition of film boiling. It is shown that time to jacket fracture under considered rupture mechanisms essentially depends on fuel element cooling conditions [ru

Upland cotton growth and yield response to timing the initial postplant irrigation

International Nuclear Information System (INIS)

Steger, A.J.; Silvertooth, J.C.; Brown, P.W.

1998-01-01

Cotton (Gossypium spp.) production in arid and semiarid regions depends on well-managed irrigation systems for optimum yield and production efficiency. Water deficit stress early in the growing season can affect the subsequent growth and development of short-season cotton. A 2-yr field study was conducted in southern Arizona to determine the optimum timing of the initial postplant irrigation for a short-season upland cotton variety based on midday leaf water potential (LWP) measurements, and to evaluate the season-long effects of delayed irrigation on subsequent plant growth patterns. In both years, the short-season upland variety, DPL 20, was planted into a Pima clay loam soil [fine-silty, mixed (calcareous), thermic Typic Torrifluvent] that had received a preplant irrigation of 152 (1993) or 254 mm (1994) approximately 3 wk prior to planting. Treatments, designated T1, T2, and T3, received the initial postplant irrigation when the average midday LWP of the uppermost, fully expanded leaf measured −1.5, −1.9, and −2.3 MPa, respectively. Daily midday LWP measurements were taken using the pressure chamber technique. Soil water was measured at 25-cm depth increments using neutron attenuation. Plant height, number of mainstem nodes, nodes above white flower (NAWF), and canopy closure were measured at weekly intervals. All treatments reached maturity, as measured by NAWF ≤ 5, at approximately the same time during the growing season. Complete canopy closure was delayed in the T3 plots resulting in reduced interception and utilization of available solar radiation early in the growing season. When treatments were initiated, approximately 84% (T1), 62% (T2), and 32% (T3) of the total plant-available water (field capacity less permanent wilting point) was present in the upper 1.5 of the soil profile. Yields were 1263, 1244, and 1110 kg lint ha−1 in 1993 and 1229, 1176, and 1095 kg lint ha −1 in 1994 for T1, T2, and T3, respectively. Lint yields were significantly

SCC Initiation Testing of Alloy 600 in High Temperature Water

Science.gov (United States)

Etien, Robert A.; Richey, Edward; Morton, David S.; Eager, Julie

Stress corrosion cracking (SCC) initiation tests have been conducted on Alloy 600 at temperatures from 304 to 367°C. Tests were conducted with in-situ monitored smooth tensile specimens under a constant load in hydrogenated environments. A reversing direct current electric potential drop (EPD) system was used for all of the tests to detect SCC initiation. Tests were conducted to examine the effects of stress (and strain), coolant hydrogen, and temperature on SCC initiation time. The thermal activation energy of SCC initiation was measured as 103 ± 18 kJ/mol in hydrogenated water, which is similar to the thermal activation energy for SCC growth. Results suggest that the fundamental mechanical parameter which controls SCC initiation is plastic strain not stress. SCC initiation was shown to have a different sensitivity than SCC growth to dissolved hydrogen level. Specifically, SCC initiation time appears to be relatively insensitive to hydrogen level in the nickel stability region.

The criterion for time symmetry of probabilistic theories and the reversibility of quantum mechanics

International Nuclear Information System (INIS)

Holster, A T

2003-01-01

Physicists routinely claim that the fundamental laws of physics are 'time symmetric' or 'time reversal invariant' or 'reversible'. In particular, it is claimed that the theory of quantum mechanics is time symmetric. But it is shown in this paper that the orthodox analysis suffers from a fatal conceptual error, because the logical criterion for judging the time symmetry of probabilistic theories has been incorrectly formulated. The correct criterion requires symmetry between future-directed laws and past-directed laws. This criterion is formulated and proved in detail. The orthodox claim that quantum mechanics is reversible is re-evaluated. The property demonstrated in the orthodox analysis is shown to be quite distinct from time reversal invariance. The view of Satosi Watanabe that quantum mechanics is time asymmetric is verified, as well as his view that this feature does not merely show a de facto or 'contingent' asymmetry, as commonly supposed, but implies a genuine failure of time reversal invariance of the laws of quantum mechanics. The laws of quantum mechanics would be incompatible with a time-reversed version of our universe

On the initial condition problem of the time domain PMCHWT surface integral equation

KAUST Repository

Uysal, Ismail Enes

2017-05-13

Non-physical, linearly increasing and constant current components are induced in marching on-in-time solution of time domain surface integral equations when initial conditions on time derivatives of (unknown) equivalent currents are not enforced properly. This problem can be remedied by solving the time integral of the surface integral for auxiliary currents that are defined to be the time derivatives of the equivalent currents. Then the equivalent currents are obtained by numerically differentiating the auxiliary ones. In this work, this approach is applied to the marching on-in-time solution of the time domain Poggio-Miller-Chan-Harrington-Wu-Tsai surface integral equation enforced on dispersive/plasmonic scatterers. Accuracy of the proposed method is demonstrated by a numerical example.

Comparison Between Individually and Group-Based Insulin Pump Initiation by Time-Driven Activity-Based Costing.

Science.gov (United States)

Ridderstråle, Martin

2017-07-01

Depending on available resources, competencies, and pedagogic preference, initiation of insulin pump therapy can be performed on either an individual or a group basis. Here we compared the two models with respect to resources used. Time-driven activity-based costing (TDABC) was used to compare initiating insulin pump treatment in groups (GT) to individual treatment (IT). Activities and cost drivers were identified, timed, or estimated at location. Medical quality and patient satisfaction were assumed to be noninferior and were not measured. GT was about 30% less time-consuming and 17% less cost driving per patient and activity compared to IT. As a batch driver (16 patients in one group) GT produced an upward jigsaw-shaped accumulative cost curve compared to the incremental increase incurred by IT. Taking the alternate cost for those not attending into account, and realizing the cost of opportunity gained, suggested that GT was cost neutral already when 5 of 16 patients attended, and that a second group could be initiated at no additional cost as the attendance rate reached 15:1. We found TDABC to be effective in comparing treatment alternatives, improving cost control and decision making. Everything else being equal, if the setup is available, our data suggest that initiating insulin pump treatment in groups is far more cost effective than on an individual basis and that TDABC may be used to find the balance point.

On the mechanism of high-voltage discharge initiation in high-voltage accelerator accelerating tubes

International Nuclear Information System (INIS)

Zheleznikov, F.G.

1983-01-01

Experimental investigation into physical natupe of discharge processes in high-voltage accelerator accelerating tubes in the absence of the accelerated particle beam are conducted. The installation for the study of the mechanism of initiating vacuum isolation conductivity is used in the experiments. The vacuum chamber of the installation is made of steel and sealed with rubber packings. Electrodes 300-360 mm in diameter are made of stainless steel. Two variants of cleaning technology were used before electrode assembling: 1) degreasing by organic solvents; 2) cleaning by fine grinding cloth with successive washing by rectificated alcohol. Analysis of the obtained data shows that forma. tion of background flux of charged particles in interelectrode gap is caused by external photoelectric effect, excited by X radiation, which initiates the formation of intensive internal field in microfilms of non-conducting impurities on the electrode surfaces. The secondary electron emission plays the minor role at that

Mechanisms of initial endplate failure in the human vertebral body.

Science.gov (United States)

Fields, Aaron J; Lee, Gideon L; Keaveny, Tony M

2010-12-01

Endplate failure occurs frequently in osteoporotic vertebral fractures and may be related to the development of high tensile strain. To determine whether the highest tensile strains in the vertebra occur in the endplates, and whether such high tensile strains are associated with the material behavior of the intervertebral disc, we used micro-CT-based finite element analysis to assess tissue-level strains in 22 elderly human vertebrae (81.5 ± 9.6 years) that were compressed through simulated intervertebral discs. In each vertebra, we compared the highest tensile and compressive strains across the different compartments: endplates, cortical shell, and trabecular bone. The influence of Poisson-type expansion of the disc on the results was determined by compressing the vertebrae a second time in which we suppressed the Poisson expansion. We found that the highest tensile strains occurred within the endplates whereas the highest compressive strains occurred within the trabecular bone. The ratio of strain to assumed tissue-level yield strain was the highest for the endplates, indicating that the endplates had the greatest risk of initial failure. Suppressing the Poisson expansion of the disc decreased the amount of highly tensile-strained tissue in the endplates by 79.4 ± 11.3%. These results indicate that the endplates are at the greatest risk of initial failure due to the development of high tensile strains, and that such high tensile strains are associated with the Poisson expansion of the disc. We conclude that initial failure of the vertebra is associated with high tensile strains in the endplates, which in turn are influenced by the material behavior of the disc. Copyright © 2010 Elsevier Ltd. All rights reserved.

The Clinical Utilisation of Respiratory Elastance Software (CURE Soft): a bedside software for real-time respiratory mechanics monitoring and mechanical ventilation management.

Science.gov (United States)

Szlavecz, Akos; Chiew, Yeong Shiong; Redmond, Daniel; Beatson, Alex; Glassenbury, Daniel; Corbett, Simon; Major, Vincent; Pretty, Christopher; Shaw, Geoffrey M; Benyo, Balazs; Desaive, Thomas; Chase, J Geoffrey

2014-09-30

Real-time patient respiratory mechanics estimation can be used to guide mechanical ventilation settings, particularly, positive end-expiratory pressure (PEEP). This work presents a software, Clinical Utilisation of Respiratory Elastance (CURE Soft), using a time-varying respiratory elastance model to offer this ability to aid in mechanical ventilation treatment. CURE Soft is a desktop application developed in JAVA. It has two modes of operation, 1) Online real-time monitoring decision support and, 2) Offline for user education purposes, auditing, or reviewing patient care. The CURE Soft has been tested in mechanically ventilated patients with respiratory failure. The clinical protocol, software testing and use of the data were approved by the New Zealand Southern Regional Ethics Committee. Using CURE Soft, patient's respiratory mechanics response to treatment and clinical protocol were monitored. Results showed that the patient's respiratory elastance (Stiffness) changed with the use of muscle relaxants, and responded differently to ventilator settings. This information can be used to guide mechanical ventilation therapy and titrate optimal ventilator PEEP. CURE Soft enables real-time calculation of model-based respiratory mechanics for mechanically ventilated patients. Results showed that the system is able to provide detailed, previously unavailable information on patient-specific respiratory mechanics and response to therapy in real-time. The additional insight available to clinicians provides the potential for improved decision-making, and thus improved patient care and outcomes.

Solutions Stability of Initial Boundary Problem, Modeling of Dynamics of Some Discrete Continuum Mechanical System

Directory of Open Access Journals (Sweden)

D. A. Eliseev

2015-01-01

Full Text Available The solution stability of an initial boundary problem for a linear hybrid system of differential equations, which models the rotation of a rigid body with two elastic rods located in the same plane is studied in the paper. To an axis passing through the mass center of the rigid body perpendicularly to the rods location plane is applied the stabilizing moment proportional to the angle of the system rotation, derivative of the angle, integral of the angle. The external moment provides a feedback. A method of studying the behavior of solutions of the initial boundary problem is proposed. This method allows to exclude from the hybrid system of differential equations partial differential equations, which describe the dynamics of distributed elements of a mechanical system. It allows us to build one equation for an angle of the system rotation. Its characteristic equation defines the stability of solutions of all the system. In the space of feedback-coefficients the areas that provide the asymptotic stability of solutions of the initial boundary problem are built up.

Associations between timing of corticosteroid treatment initiation and clinical outcomes in Duchenne muscular dystrophy.

Science.gov (United States)

Kim, Sunkyung; Zhu, Yong; Romitti, Paul A; Fox, Deborah J; Sheehan, Daniel W; Valdez, Rodolfo; Matthews, Dennis; Barber, Brent J

2017-08-01

The long-term efficacy of corticosteroid treatment and timing of treatment initiation among Duchenne muscular dystrophy (DMD) patients is not well-understood. We used data from a longitudinal, population-based DMD surveillance program to examine associations between timing of treatment initiation (early childhood [before or at age 5 years], late childhood [after age 5 years], and naïve [not treated]) and five clinical outcomes (age at loss of ambulation; ages at onset of cardiomyopathy, scoliosis, and first fracture; and pulmonary function). Hazard ratios (HRs) and 95% confidence intervals (CIs) were estimated using survival analysis. DMD patients who initiated corticosteroid treatment in early childhood had a higher risk of earlier onset cardiomyopathy compared to cases who initiated treatment in late childhood (HR = 2.0, 95% CI = [1.2, 3.4]) or treatment naïve patients (HR = 1.9, 95% CI = [1.1, 3.2]), and higher risk of suffering a fracture (HR = 2.3, 95% CI = [1.4, 3.7] and HR = 2.6, 95% CI = [1.6, 4.2], respectively). Patients with early childhood treatment had slightly decreased respiratory function compared with those with late childhood treatment. Ages at loss of ambulation or scoliosis diagnosis did not differ statistically among treatment groups. We caution that the results from our study are subject to several limitations, as they were based on data abstracted from medical records. Further investigations using improved reporting of disease onset and outcomes are warranted to obtain a more definitive assessment of the association between the timing of corticosteroid treatment and disease severity. Published by Elsevier B.V.

‘Initiative-Decision’ Typology of New Product Launching (NPL into Local Market: Toward Interaction Mechanism

Directory of Open Access Journals (Sweden)

Firmanzah

2009-12-01

Full Text Available New product launching (NPL process in subsidiaries is very complex, expensive and risky. This process is marked by the problem of role partition between headquarter and subsidiaries. This research emphasizes the quality of relation between subsidiaries and headquarter which determines the qualities of NPL process into local market. Typology of initiative-decision during NPL process has been documented. Using cluster analysis, three clusters of ‘initiative-decision’ during NPL are found in this research: ‘headquarters domination’, ‘mix-initiative’ and ‘interaction’. Using ANOVA analysis, this research found that interaction between subsidiary and headquarter managers positively increases the effectiveness of marketing-strategy during NPL process. This finding suggests that interaction mechanism between subsidiary and headquarter is the best solution to launch a new product to the local market.

Very High Cycle Fatigue Crack Initiation Mechanism in Nugget Zone of AA 7075 Friction Stir Welded Joint

Directory of Open Access Journals (Sweden)

Chao He

2017-01-01

Full Text Available Very high cycle fatigue behavior of nugget zone in AA 7075 friction stir welded joint was experimentally investigated using ultrasonic fatigue testing system (20 kHz to clarify the crack initiation mechanism. It was found that the fatigue strength of nugget zone decreased continuously even beyond 107 cycles with no traditional fatigue limits. Fatigue cracks initiated from the welding defects located at the bottom side of the friction stir weld. Moreover, a special semicircular zone could be characterized around the crack initiation site, of which the stress intensity factor approximately equaled the threshold of fatigue crack propagation rate. Finally, a simplified model was proposed to estimate the fatigue life by correlating the welding defect size and applied stress. The predicted results are in good agreement with the experimental results.

What is optimal timing for trauma team alerts? A retrospective observational study of alert timing effects on the initial management of trauma patients

Directory of Open Access Journals (Sweden)

Lillebo B

2012-08-01

Full Text Available Borge Lillebo,1 Andreas Seim,2 Ole-Petter Vinjevoll,3 Oddvar Uleberg31Norwegian EHR Research Centre, Department of Neuroscience, Faculty of Medicine, Norwegian University of Science and Technology, Trondheim, Norway; 2Department of Computer and Information Science, Faculty of Information Technology, Mathematics and Electrical Engineering, NTNU, Trondheim, Norway; 3Department of Anaesthesia and Emergency Medicine, St Olav's University Hospital, Trondheim, NorwayBackground: Trauma teams improve the initial management of trauma patients. Optimal timing of trauma alerts could improve team preparedness and performance while also limiting adverse ripple effects throughout the hospital. The purpose of this study was to evaluate how timing of trauma team activation and notification affects initial in-hospital management of trauma patients.Methods: Data from a single hospital trauma care quality registry were matched with data from a trauma team alert log. The time from patient arrival to chest X-ray, and the emergency department length of stay were compared with the timing of trauma team activations and whether or not trauma team members received a preactivation notification.Results: In 2009, the trauma team was activated 352 times; 269 times met the inclusion criteria. There were statistically significant differences in time to chest X-ray for differently timed trauma team activations (P = 0.003. Median time to chest X-ray for teams activated 15–20 minutes prearrival was 5 minutes, and 8 minutes for teams activated <5 minutes before patient arrival. Timing had no effect on length of stay in the emergency department (P = 0.694. We found no effect of preactivation notification on time to chest X-ray (P = 0.474 or length of stay (P = 0.684.Conclusion: Proactive trauma team activation improved the initial management of trauma patients. Trauma teams should be activated prior to patient arrival.Keywords: emergency medical service communication systems

Spiral Wave Initiation in Reaction-Diffusion-Mechanics Systems: A Model for the Onset of Reentrant Cardiac Arrhythmia

NARCIS (Netherlands)

Weise, L.D.

2012-01-01

Heart failure due to cardiac arrhythmias is a major cause of death in the industrialized world. Cardiac arrhythmia is often caused by spi- ral waves of electrical activity in the cardiac muscle. Therefore, it is a major task in cardiology to understand the mechanisms of spiral wave initiation in the

Mechanics and Newton-Cartan-like gravity on the Newton-Hooke space-time

International Nuclear Information System (INIS)

Tian Yu; Guo Hanying; Huang Chaoguang; Xu Zhan; Zhou Bin

2005-01-01

We focus on the dynamical aspects on Newton-Hooke space-time NH + mainly from the viewpoint of geometric contraction of the de Sitter spacetime with Beltrami metric. (The term spacetime is used to denote a space with non-degenerate metric, while the term space-time is used to denote a space with degenerate metric.) We first discuss the Newton-Hooke classical mechanics, especially the continuous medium mechanics, in this framework. Then, we establish a consistent theory of gravity on the Newton-Hooke space-time as a kind of Newton-Cartan-like theory, parallel to the Newton's gravity in the Galilei space-time. Finally, we give the Newton-Hooke invariant Schroedinger equation from the geometric contraction, where we can relate the conservative probability in some sense to the mass density in the Newton-Hooke continuous medium mechanics. Similar consideration may apply to the Newton-Hooke space-time NH - contracted from anti-de Sitter spacetime

A mechanical nanomembrane detector for time-of-flight mass spectrometry.

Science.gov (United States)

Park, Jonghoo; Qin, Hua; Scalf, Mark; Hilger, Ryan T; Westphall, Michael S; Smith, Lloyd M; Blick, Robert H

2011-09-14

We describe here a new principle for ion detection in time-of-flight (TOF) mass spectrometry in which an impinging ion packet excites mechanical vibrations in a silicon nitride (Si(3)N(4)) nanomembrane. The nanomembrane oscillations are detected by means of time-varying field emission of electrons from the mechanically oscillating nanomembrane. Ion detection is demonstrated in the MALDI-TOF analysis of proteins varying in mass from 5729 (insulin) to 150,000 (Immunoglobulin G) daltons. The detector response agrees well with the predictions of a thermomechanical model in which the impinging ion packet causes a nonuniform temperature distribution in the nanomembrane, exciting both fundamental and higher order oscillations.

High temperature crack initiation in an austenitic stainless steel

International Nuclear Information System (INIS)

Laiarinandrasana, Lucien

1994-01-01

The study deals with crack initiation at 600 deg. C and 650 deg. C, on an austenitic stainless steel referenced by Z2 CND 17 12. The behaviour laws of the studied plate were updated in comparison with existing data. Forty tests were carried out on CT specimens, with continuous fatigue with load or displacement controlled, pure creep, pure relaxation, creep-fatigue and creep-relaxation loadings. The practical initiation definition corresponds to a small crack growth of about the grain size, monitored by electrical potential drop technique. The time necessary for the crack to initiate is predicted with fracture mechanics global and local approaches, with the help of microstructural observations and finite element results. An identification of a 'Paris' law' for continuous cyclic loading and of a unique correlation between the initiation time and C h * for creep tests was established. For the local approach, crack initiation by creep can be interpreted as the reaching of a critical damage level, by using a damage incremental rule. For creep-fatigue tests, crack growth rates at initiation are greater than those of Paris' law for continuous fatigue. A calculation of a transition time between elastic-plastic and creep domains shows that crack initiation can be interpreted whether by providing Paris' law with an acceleration term when the dwell period is less than the transition time, or by calculating a creep contribution which relies on C h * parameter when the dwell period and/or the initiation times are greater than the transition time. Creep relaxation tests present crack growth rates at initiation which are less than those for 'equivalent' creep-fatigue tests. These crack growth rates decrease when increasing hold time, but also when temperature decreases. Though, for hold times which are important enough and at lower temperature, there is no effect of the dwell period insofar as crack growth rate is equal to continuous fatigue

Unsaturated Zone Effects in Predicting Landslide and Debris-Flow Initiation

Science.gov (United States)

Baum, R. L.; Godt, J. W.; Savage, W. Z.

2006-12-01

Many destructive debris flows begin as shallow landslides induced by direct infiltration of intense rainfall and storm runoff into hillside materials. Predicting the timing and location of debris-flow initiation is needed to assess the debris-flow hazard of an area. Theoretical models and real-time monitoring of rainfall infiltration into unsaturated hillside materials provide useful insights into the mechanisms and timing of rainfall-induced landslides. We modeled the infiltration process using a two-layer system that consists of an unsaturated zone above a saturated zone, and then implemented this model in a GIS framework. The model couples analytical solutions for transient, unsaturated, vertical infiltration above the water table to pressure-diffusion solutions for pressure changes below the water table. The solutions are coupled through a transient water table that rises as water accumulates at the base of the unsaturated zone. This scheme, though limited to simplified soil- water characteristics and moist initial conditions, greatly improves computational efficiency over numerical models in spatially distributed modeling applications. Pore pressures computed by these coupled models are subsequently used in slope-stability computations to estimate the timing and locations of slope failures. Preliminary model results indicate that the unsaturated layer attenuates and delays the rainfall-induced pore- pressure response at depth, consistent with observations at an instrumented hillside near Edmonds, Washington. This attenuation reduces the area of false-positive predictions (when compared with results of linear models for suction-saturated initial conditions) in distributed application of the model over an area. Modeling indicates that initial wetness of the hillside materials affects the intensity and duration of rainfall required to trigger shallow landslides and consequently the timing of their occurrence, a result that is also consistent with observations of

Mechanical energy yields and pressure volume and pressure time curves for whole core fuel-coolant interactions

Energy Technology Data Exchange (ETDEWEB)

Coddington, P [United Kingdom Atomic Energy Authority, Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

1979-10-15

In determining the damage consequences of a whole core Fuel-Coolant Interaction (FCI), one measure of the strength of a FCI that can be used and is independent of the system geometry is the constant volume mixing mechanical yield (often referred to as the Hicks-Menzies yield), which represents a near upper limit to the mechanical work of a FCI. This paper presents a recalculation of the Hicks-Menzies yields for UO{sub 2} and sodium for a range of initial fuel temperatures and fuel to coolant mass ratios, using recently published UO{sub 2} and sodium equation of state data. The work presented here takes a small number of postulated FCIs with as wide range as possible of thermal interaction parameters and determines their pressure-volume P(V) and pressure-time P(t) relations, using geometrical constraints representative of the reactor. Then by examining these P(V) and P(t) curves a representative pressure-relative volume curve or range of possible curves, for use in containment analysis, is recommended

Non-linear effects of initial melt temperatures on microstructures and mechanical properties during quenching process of liquid Cu{sub 46}Zr{sub 54} alloy

Energy Technology Data Exchange (ETDEWEB)

Mo, Yun-Fei [School of Physics and Microelectronics Science, Hunan University, Changsha, 410082 (China); Liu, Rang-Su, E-mail: liurangsu@sina.com [School of Physics and Microelectronics Science, Hunan University, Changsha, 410082 (China); Tian, Ze-An; Liang, Yong-Chao [School of Physics and Microelectronics Science, Hunan University, Changsha, 410082 (China); Zhang, Hai-Tao [School of Physics and Microelectronics Science, Hunan University, Changsha, 410082 (China); Department of Electronic and Communication Engineering, Changsha University, Changsha 410003 (China); Hou, Zhao-Yang [Department of Applied Physics, Chang’an University, Xi’an 710064 (China); Liu, Hai-Rong [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Zhang, Ai-long [College of Physics and Electronics, Hunan University of Arts and Science, Changde 415000 (China); Zhou, Li-Li [Department of Information Engineering, Gannan Medical University, Ganzhou 341000 (China); Peng, Ping [College of Materials Science and Engineering, Hunan University, Changsha 410082 (China); Xie, Zhong [School of Physics and Microelectronics Science, Hunan University, Changsha, 410082 (China)

2015-05-15

A MD simulation of liquid Cu{sub 46}Zr{sub 54} alloys has been performed for understanding the effects of initial melt temperatures on the microstructural evolution and mechanical properties during quenching process. By using several microstructural analyzing methods, it is found that the icosahedral and defective icosahedral clusters play a key role in the microstructure transition. All the final solidification structures obtained at different initial melt temperatures are of amorphous structures, and their structural and mechanical properties are non-linearly related to the initial melt temperatures, and fluctuated in a certain range. Especially, there exists a best initial melt temperature, from which the glass configuration possesses the highest packing density, the optimal elastic constants, and the smaller extent of structural softening under deforming.

Detecting method for crude oil price fluctuation mechanism under different periodic time series

International Nuclear Information System (INIS)

Gao, Xiangyun; Fang, Wei; An, Feng; Wang, Yue

2017-01-01

Highlights: • We proposed the concept of autoregressive modes to indicate the fluctuation patterns. • We constructed transmission networks for studying the fluctuation mechanism. • There are different fluctuation mechanism under different periodic time series. • Only a few types of autoregressive modes control the fluctuations in crude oil price. • There are cluster effects during the fluctuation mechanism of autoregressive modes. - Abstract: Current existing literatures can characterize the long-term fluctuation of crude oil price time series, however, it is difficult to detect the fluctuation mechanism specifically under short term. Because each fluctuation pattern for one short period contained in a long-term crude oil price time series have dynamic characteristics of diversity; in other words, there exhibit various fluctuation patterns in different short periods and transmit to each other, which reflects the reputedly complicate and chaotic oil market. Thus, we proposed an incorporated method to detect the fluctuation mechanism, which is the evolution of the different fluctuation patterns over time from the complex network perspective. We divided crude oil price time series into segments using sliding time windows, and defined autoregressive modes based on regression models to indicate the fluctuation patterns of each segment. Hence, the transmissions between different types of autoregressive modes over time form a transmission network that contains rich dynamic information. We then capture transmission characteristics of autoregressive modes under different periodic time series through the structure features of the transmission networks. The results indicate that there are various autoregressive modes with significantly different statistical characteristics under different periodic time series. However, only a few types of autoregressive modes and transmission patterns play a major role in the fluctuation mechanism of the crude oil price, and these

ATLAS Level-1 Calorimeter Trigger: Initial Timing and Energy Calibration

CERN Document Server

Childers, J T; The ATLAS collaboration

2010-01-01

The ATLAS Level-1 Calorimeter Trigger identifies high-pT objects in the Liquid Argon and Tile Calorimeters with a fixed latency of ~2.0 µs using a hardware-based, pipelined system built with custom electronics. The Preprocessor Module conditions and digitizes about 7200 pre-summed analogue signals from the calorimeters at the LHC bunch-crossing frequency of 40 MHz, and performs bunch-crossing identification (BCID) and deposited energy measurement for each input signal. This information is passed to further processors for object classification and total energy calculation, and the results used to make the Level-1 trigger decision for the ATLAS detector. The BCID and energy measurement in the trigger depend on precise timing adjustment to achieve correct sampling of the input signal peak. Test pulses from the calorimeters were analysed to derive the initial timing and energy calibration, and first data from the LHC restart in autumn 2009 and early 2010 were used for validation and further optimization. The res...

Public involvement in the priority setting activities of a wait time management initiative: a qualitative case study.

Science.gov (United States)

Bruni, Rebecca A; Laupacis, Andreas; Levinson, Wendy; Martin, Douglas K

2007-11-16

As no health system can afford to provide all possible services and treatments for the people it serves, each system must set priorities. Priority setting decision makers are increasingly involving the public in policy making. This study focuses on public engagement in a key priority setting context that plagues every health system around the world: wait list management. The purpose of this study is to describe and evaluate priority setting for the Ontario Wait Time Strategy, with special attention to public engagement. This study was conducted at the Ontario Wait Time Strategy in Ontario, Canada which is part of a Federal-Territorial-Provincial initiative to improve access and reduce wait times in five areas: cancer, cardiac, sight restoration, joint replacements, and diagnostic imaging. There were two sources of data: (1) over 25 documents (e.g. strategic planning reports, public updates), and (2) 28 one-on-one interviews with informants (e.g. OWTS participants, MOHLTC representatives, clinicians, patient advocates). Analysis used a modified thematic technique in three phases: open coding, axial coding, and evaluation. The Ontario Wait Time Strategy partially meets the four conditions of 'accountability for reasonableness'. The public was not directly involved in the priority setting activities of the Ontario Wait Time Strategy. Study participants identified both benefits (supporting the initiative, experts of the lived experience, a publicly funded system and sustainability of the healthcare system) and concerns (personal biases, lack of interest to be involved, time constraints, and level of technicality) for public involvement in the Ontario Wait Time Strategy. Additionally, the participants identified concern for the consequences (sustainability, cannibalism, and a class system) resulting from the Ontario Wait Times Strategy. We described and evaluated a wait time management initiative (the Ontario Wait Time Strategy) with special attention to public

Public involvement in the priority setting activities of a wait time management initiative: a qualitative case study

Directory of Open Access Journals (Sweden)

Laupacis Andreas

2007-11-01

Full Text Available Abstract Background As no health system can afford to provide all possible services and treatments for the people it serves, each system must set priorities. Priority setting decision makers are increasingly involving the public in policy making. This study focuses on public engagement in a key priority setting context that plagues every health system around the world: wait list management. The purpose of this study is to describe and evaluate priority setting for the Ontario Wait Time Strategy, with special attention to public engagement. Methods This study was conducted at the Ontario Wait Time Strategy in Ontario, Canada which is part of a Federal-Territorial-Provincial initiative to improve access and reduce wait times in five areas: cancer, cardiac, sight restoration, joint replacements, and diagnostic imaging. There were two sources of data: (1 over 25 documents (e.g. strategic planning reports, public updates, and (2 28 one-on-one interviews with informants (e.g. OWTS participants, MOHLTC representatives, clinicians, patient advocates. Analysis used a modified thematic technique in three phases: open coding, axial coding, and evaluation. Results The Ontario Wait Time Strategy partially meets the four conditions of 'accountability for reasonableness'. The public was not directly involved in the priority setting activities of the Ontario Wait Time Strategy. Study participants identified both benefits (supporting the initiative, experts of the lived experience, a publicly funded system and sustainability of the healthcare system and concerns (personal biases, lack of interest to be involved, time constraints, and level of technicality for public involvement in the Ontario Wait Time Strategy. Additionally, the participants identified concern for the consequences (sustainability, cannibalism, and a class system resulting from the Ontario Wait Times Strategy. Conclusion We described and evaluated a wait time management initiative (the Ontario

Time-dependent mechanical behavior of human amnion: Macroscopic and microscopic characterization

OpenAIRE

2014-01-01

© 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. Characterizing the mechanical response of the human amnion is essential to understand and to eventually prevent premature rupture of fetal membranes. In this study a large set of macroscopic and microscopic mechanical tests have been carried out on fresh unfixed amnion to gain insight into the time dependent material response and the underlying mechanisms. Creep and relaxation responses of amnion were characterized in...

Age at the time of sulfonylurea initiation influences treatment outcomes in KCNJ11-related neonatal diabetes.

Science.gov (United States)

Thurber, Brian W; Carmody, David; Tadie, Elizabeth C; Pastore, Ashley N; Dickens, Jazzmyne T; Wroblewski, Kristen E; Naylor, Rochelle N; Philipson, Louis H; Greeley, Siri Atma W

2015-07-01

Individuals with heterozygous activating mutations of the KCNJ11 gene encoding a subunit of the ATP-sensitive potassium channel (KATP) can usually be treated with oral sulfonylurea (SU) pills in lieu of insulin injections. The aim of this study was to test our hypothesis that younger age at the time of initiation of SU therapy is correlated with lower required doses of SU therapy, shorter transition time and decreased likelihood of requiring additional diabetes medications. We performed a retrospective cohort study using data on 58 individuals with neonatal diabetes due to KCNJ11 mutations identified through the University of Chicago Monogenic Diabetes Registry ( http://monogenicdiabetes.uchicago.edu/registry ). We assessed the influence of age at initiation of SU therapy on treatment outcomes. HbA1c fell from an average of 8.5% (69 mmol/mol) before transition to 6.2% (44 mmol/mol) after SU therapy (p < 0.001). Age of initiation of SU correlated with the dose (mg kg(-1) day(-1)) of SU required at follow-up (r = 0.80, p < 0.001). Similar associations were observed across mutation subtypes. Ten participants required additional glucose-lowering medications and all had initiated SU at age 13 years or older. No serious adverse events were reported. Earlier age at initiation of SU treatment is associated with improved response to SU therapy. Declining sensitivity to SU may be due to loss of beta cell mass over time in those treated with insulin. Our data support the need for early genetic diagnosis and appropriate personalised treatment in all cases of neonatal diabetes.

Distinct timing mechanisms produce discrete and continuous movements.

Directory of Open Access Journals (Sweden)

Raoul Huys

2008-04-01

Full Text Available The differentiation of discrete and continuous movement is one of the pillars of motor behavior classification. Discrete movements have a definite beginning and end, whereas continuous movements do not have such discriminable end points. In the past decade there has been vigorous debate whether this classification implies different control processes. This debate up until the present has been empirically based. Here, we present an unambiguous non-empirical classification based on theorems in dynamical system theory that sets discrete and continuous movements apart. Through computational simulations of representative modes of each class and topological analysis of the flow in state space, we show that distinct control mechanisms underwrite discrete and fast rhythmic movements. In particular, we demonstrate that discrete movements require a time keeper while fast rhythmic movements do not. We validate our computational findings experimentally using a behavioral paradigm in which human participants performed finger flexion-extension movements at various movement paces and under different instructions. Our results demonstrate that the human motor system employs different timing control mechanisms (presumably via differential recruitment of neural subsystems to accomplish varying behavioral functions such as speed constraints.

A simple method to calculate first-passage time densities with arbitrary initial conditions

Science.gov (United States)

Nyberg, Markus; Ambjörnsson, Tobias; Lizana, Ludvig

2016-06-01

Numerous applications all the way from biology and physics to economics depend on the density of first crossings over a boundary. Motivated by the lack of general purpose analytical tools for computing first-passage time densities (FPTDs) for complex problems, we propose a new simple method based on the independent interval approximation (IIA). We generalise previous formulations of the IIA to include arbitrary initial conditions as well as to deal with discrete time and non-smooth continuous time processes. We derive a closed form expression for the FPTD in z and Laplace-transform space to a boundary in one dimension. Two classes of problems are analysed in detail: discrete time symmetric random walks (Markovian) and continuous time Gaussian stationary processes (Markovian and non-Markovian). Our results are in good agreement with Langevin dynamics simulations.

Analysis of chemical degradation mechanism of phosphorescent organic light emitting devices by laser-desorption/ionization time-of-flight mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Rabelo de Moraes, Ines; Scholz, Sebastian; Luessem, Bjoern; Leo, Karl [Institut fuer Angewandte Photophysik, Technische Universitaet Dresden (Germany)

2010-07-01

Phosphorescent organic light emitting diodes (OLEDs) have attracted much interest for their potential application in full color flat-panel displays and as an alternative lighting source. However, low efficiency, and the short operation lifetime, in particular in the case of blue emitting devices, are the major limitations for the current OLEDs commercialization. In order to overcome these limitations, a deep knowledge about the aging and the degradation mechanism is required. Our work focuses on the chemical degradation mechanism of different iridium based emitter materials like FIrpic (light blue) and Ir(ppy)3 (green), commonly used in OLEDs. For this purpose, the devices were aged by electrical driving until the luminance reached 6% of the initial luminance. The laser-desorption/ionization time-of-flight mass spectrometry was used to determine specific degradation pathways.

Structure-to-property relationships in addition cured polymers. II - Resin Tg and composite initial mechanical properties of norbornenyl cured polyimide resins

Science.gov (United States)

Alston, William B.

1986-01-01

PRM (polymerization of monomeric reactants) methodology was used to prepare thirty different polyimide oligomeric resins. Monomeric composition as well as chain length between sites of crosslinks were varied to examine their effects on glass transition temperature (Tg) of the cured/postcured resins. An almost linear correlation of Tg versus molecular distance between the crosslinks was observed. An attempt was made to correlate Tg with initial mechanical properties (flexural strength and interlaminar shear strength) of unidirectional graphite fiber composites prepared with these resins. However, the scatter in mechanical strength data prevented obtaining as clear a correlation as was observed for the structural modification/crosslink distance versus Tg. Instead, only a range of composite mechanical properties was obtained at the test temperatures studied (room temperature, 288 and 316 C). Perhaps more importantly, what did become apparent during the attempted correlation study was: (1) that PMR methodology could be used to prepare composites from resins that contain a wide variety of monomer modifications, and (2) that these composites almost invariably provided satisfactory initial mechanical properties as long as the resins selected were melt processable.

Timing of initiation of antiretroviral therapy in human immunodeficiency virus (HIV)--associated tuberculous meningitis

NARCIS (Netherlands)

Török, M. Estee; Yen, Nguyen Thi Bich; Chau, Tran Thi Hong; Mai, Nguyen Thi Hoang; Phu, Nguyen Hoan; Mai, Pham Phuong; Dung, Nguyen Thi; Chau, Nguyen Van Vinh; Bang, Nguyen Duc; Tien, Nguyen Anh; Minh, N. H.; Hien, Nguyen Quang; Thai, Phan Vuong Khac; Dong, Doan The; Anh, Do Thi Tuong; Thoa, Nguyen Thi Cam; Hai, Nguyen Ngoc; Lan, Nguyen Ngoc; Lan, Nguyen Thi Ngoc; Quy, Hoang Thi; Dung, Nguyen Huy; Hien, Tran Tinh; Chinh, Nguyen Tran; Simmons, Cameron Paul; de Jong, Menno; Wolbers, Marcel; Farrar, Jeremy James

2011-01-01

The optimal time to initiate antiretroviral therapy (ART) in human immunodeficiency virus (HIV)-associated tuberculous meningitis is unknown. We conducted a randomized, double-blind, placebo-controlled trial of immediate versus deferred ART in patients with HIV-associated tuberculous meningitis to

Timing of First Antenatal Care (ANC) and Inequalities in Early Initiation of ANC in Nepal.

Science.gov (United States)

Paudel, Yuba Raj; Jha, Trishna; Mehata, Suresh

2017-01-01

The provision and uptake of quality and timely antenatal care (ANC) is an essential element of efforts to improve health outcomes for women and newborn babies. Antenatal consultations assist in early identification and treatment of complications during pregnancy. This study aimed to provide an information on distribution and inequalities in early initiation of ANC in Nepal. The distribution and inequalities in the early initiation of ANC were examined using Nepal Demographic and Health Surveys 2011. Bivariate and multivariate logistic regression was used to assess inequalities. Overall, 70% of the women had started their first ANC at 4 month or earlier. Among participants who had never attended school, just more than half (52%) received first ANC at 4 months or earlier, while majority of participants (97%) who had received higher education received first ANC at recommended time. Similarly, 89% of those from richest quintile and 48% of those from poorest quintile received first ANC at recommended time. In adjusted analysis, women from richest wealth quintile were significantly more likely to initiate ANC early (AOR: 3.74, 95% CI: 2.31-6.05) compared to the poorest. Similarly, women with higher level education were significantly more likely (AOR: 11.40, 95% CI: 5.05-25.73) to initiate ANC early compared to women who had never attended school. A significantly lower odds of early ANC take up was observed among madhesi other caste (AOR: 0.56, 95% CI: 0.35-0.90) compared to brahmin/chhetri women. Women whose pregnancy was unwanted were significantly less likely to attend first ANC at 4 months or early (AOR: 0.73, 95% CI: 0.58-0.93) in comparison to women whose pregnancy was wanted. The differences in the recommended timing of initiation of ANC were evident among women with different educational, economic levels, and caste/ethnic groups. Rural women were less likely to have checkups as per guidelines. The findings suggest to a need of interventions to raise female

Timing of First Antenatal Care (ANC and Inequalities in Early Initiation of ANC in Nepal

Directory of Open Access Journals (Sweden)

Yuba Raj Paudel

2017-09-01

Full Text Available BackgroundThe provision and uptake of quality and timely antenatal care (ANC is an essential element of efforts to improve health outcomes for women and newborn babies. Antenatal consultations assist in early identification and treatment of complications during pregnancy. This study aimed to provide an information on distribution and inequalities in early initiation of ANC in Nepal.MethodsThe distribution and inequalities in the early initiation of ANC were examined using Nepal Demographic and Health Surveys 2011. Bivariate and multivariate logistic regression was used to assess inequalities.FindingsOverall, 70% of the women had started their first ANC at 4 month or earlier. Among participants who had never attended school, just more than half (52% received first ANC at 4 months or earlier, while majority of participants (97% who had received higher education received first ANC at recommended time. Similarly, 89% of those from richest quintile and 48% of those from poorest quintile received first ANC at recommended time. In adjusted analysis, women from richest wealth quintile were significantly more likely to initiate ANC early (AOR: 3.74, 95% CI: 2.31–6.05 compared to the poorest. Similarly, women with higher level education were significantly more likely (AOR: 11.40, 95% CI: 5.05–25.73 to initiate ANC early compared to women who had never attended school. A significantly lower odds of early ANC take up was observed among madhesi other caste (AOR: 0.56, 95% CI: 0.35–0.90 compared to brahmin/chhetri women. Women whose pregnancy was unwanted were significantly less likely to attend first ANC at 4 months or early (AOR: 0.73, 95% CI: 0.58–0.93 in comparison to women whose pregnancy was wanted.ConclusionThe differences in the recommended timing of initiation of ANC were evident among women with different educational, economic levels, and caste/ethnic groups. Rural women were less likely to have checkups as per guidelines. The findings

Time to rethink the neural mechanisms of learning and memory.

Science.gov (United States)

Gallistel, Charles R; Balsam, Peter D

2014-02-01

Most studies in the neurobiology of learning assume that the underlying learning process is a pairing - dependent change in synaptic strength that requires repeated experience of events presented in close temporal contiguity. However, much learning is rapid and does not depend on temporal contiguity, which has never been precisely defined. These points are well illustrated by studies showing that the temporal relations between events are rapidly learned- even over long delays- and that this knowledge governs the form and timing of behavior. The speed with which anticipatory responses emerge in conditioning paradigms is determined by the information that cues provide about the timing of rewards. The challenge for understanding the neurobiology of learning is to understand the mechanisms in the nervous system that encode information from even a single experience, the nature of the memory mechanisms that can encode quantities such as time, and how the brain can flexibly perform computations based on this information. Copyright © 2013 Elsevier Inc. All rights reserved.

Influence of temperature on patch residence time in parasitoids: physiological and behavioural mechanisms

Science.gov (United States)

Moiroux, Joffrey; Abram, Paul K.; Louâpre, Philippe; Barrette, Maryse; Brodeur, Jacques; Boivin, Guy

2016-04-01

Patch time allocation has received much attention in the context of optimal foraging theory, including the effect of environmental variables. We investigated the direct role of temperature on patch time allocation by parasitoids through physiological and behavioural mechanisms and its indirect role via changes in sex allocation and behavioural defences of the hosts. We compared the influence of foraging temperature on patch residence time between an egg parasitoid, Trichogramma euproctidis, and an aphid parasitoid, Aphidius ervi. The latter attacks hosts that are able to actively defend themselves, and may thus indirectly influence patch time allocation of the parasitoid. Patch residence time decreased with an increase in temperature in both species. The increased activity levels with warming, as evidenced by the increase in walking speed, partially explained these variations, but other mechanisms were involved. In T. euproctidis, the ability to externally discriminate parasitised hosts decreased at low temperature, resulting in a longer patch residence time. Changes in sex allocation with temperature did not explain changes in patch time allocation in this species. For A. ervi, we observed that aphids frequently escaped at intermediate temperature and defended themselves aggressively at high temperature, but displayed few defence mechanisms at low temperature. These defensive behaviours resulted in a decreased patch residence time for the parasitoid and partly explained the fact that A. ervi remained for a shorter time at the intermediate and high temperatures than at the lowest temperature. Our results suggest that global warming may affect host-parasitoid interactions through complex mechanisms including both direct and indirect effects on parasitoid patch time allocation.

Conformal quantum mechanics and holography in noncommutative space-time

Science.gov (United States)

Gupta, Kumar S.; Harikumar, E.; Zuhair, N. S.

2017-09-01

We analyze the effects of noncommutativity in conformal quantum mechanics (CQM) using the κ-deformed space-time as a prototype. Up to the first order in the deformation parameter, the symmetry structure of the CQM algebra is preserved but the coupling in a canonical model of the CQM gets deformed. We show that the boundary conditions that ensure a unitary time evolution in the noncommutative CQM can break the scale invariance, leading to a quantum mechanical scaling anomaly. We calculate the scaling dimensions of the two and three point functions in the noncommutative CQM which are shown to be deformed. The AdS2 / CFT1 duality for the CQM suggests that the corresponding correlation functions in the holographic duals are modified. In addition, the Breitenlohner-Freedman bound also picks up a noncommutative correction. The strongly attractive regime of a canonical model of the CQM exhibit quantum instability. We show that the noncommutativity softens this singular behaviour and its implications for the corresponding holographic duals are discussed.

Initiation of delayed hydride cracking in zirconium-2.5 wt% niobium

International Nuclear Information System (INIS)

Shalabi, A.F.; Meneley, D.A.

1990-01-01

Delayed hydride cracking in zirconium alloys is caused by the repeated precipitation and cracking of brittle hydrides. The growth kinetic of the hydrides have been measured to evaluate the critical hydride length for crack initiation. Hydride growth leading to crack initiation follows an approximate (time) 1/3 law on the average; crack propagation proceeds in a stepwise fashion. The critical length of hydride for crack initiation increases with stress and temperature. The fracture criterion for crack initiation predicts the critical hydride length at a give stress level and temperature. The fracture initiation mechanism of the hydride confirms the temperature effects for heating and cooling cycles under services loads. (orig.)

Quantum mechanics of time travel through post-selected teleportation

International Nuclear Information System (INIS)

Lloyd, Seth; Garcia-Patron, Raul; Maccone, Lorenzo; Giovannetti, Vittorio; Shikano, Yutaka

2011-01-01

This paper discusses the quantum mechanics of closed-timelike curves (CTCs) and of other potential methods for time travel. We analyze a specific proposal for such quantum time travel, the quantum description of CTCs based on post-selected teleportation (P-CTCs). We compare the theory of P-CTCs to previously proposed quantum theories of time travel: the theory is inequivalent to Deutsch's theory of CTCs, but it is consistent with path-integral approaches (which are the best suited for analyzing quantum-field theory in curved space-time). We derive the dynamical equations that a chronology-respecting system interacting with a CTC will experience. We discuss the possibility of time travel in the absence of general-relativistic closed-timelike curves, and investigate the implications of P-CTCs for enhancing the power of computation.

TRACnet Internet and Short Message Service Technology Improves Time to Antiretroviral Therapy Initiation Among HIV-infected Infants in Rwanda.

Science.gov (United States)

Kayumba, Kizito; Nsanzimana, Sabin; Binagwaho, Agnes; Mugwaneza, Placidie; Rusine, John; Remera, Eric; Koama, Jean Baptiste; Ndahindwa, Vedaste; Johnson, Pamela; Riedel, David J; Condo, Jeanine

2016-07-01

Delays in testing HIV-exposed infants and obtaining results in resource-limited settings contribute to delays for initiating antiretroviral therapy (ART) in infants. To overcome this challenge, Rwanda expanded its national mobile and Internet-based HIV/AIDS informatics system, called TRACnet, to include HIV polymerase chain reaction (PCR) results in 2010. This study was performed to evaluate the impact of TRACnet technology on the time to delivery of test results and the subsequent initiation of ART in HIV-infected infants. A retrospective cohort study was conducted on 380 infants who initiated ART in 190 health facilities in Rwanda from March 2010 to June 2013. Program data collected by the TRACnet system were extracted and analyzed. Since the introduction of TRACnet for processing PCR results, the time to receive results has significantly decreased from a median of 144 days [interquartile range (IQR): 121-197 days] to 23 days (IQR: 17-43 days). The number of days between PCR sampling and health facility receipt of results decreased substantially from a median of 90 days (IQR: 83-158 days) to 5 days (IQR: 2-8 days). After receiving PCR results at a health facility, it takes a median of 44 days (IQR: 32-77 days) before ART initiation. Result turnaround time was significantly associated with time to initiating ART (P technology for communication of HIV PCR results, coupled with well-trained and skilled personnel, can reduce delays in communicating results to providers. Such reductions may improve timely ART initiation in resource-limited settings.

Effect of initial porosity on mechanical properties of C/SiC composites fabricated by silicon melt infiltration process

Energy Technology Data Exchange (ETDEWEB)

Bae, D.S.; Son, D.Y. [Dept. of Materials and Metallurgical Eng., Dong-Eui Univ., Busan (Korea); Lee, S.P. [Dept. of Mechanical Eng., Dong-Eui Univ., Busan (Korea); Park, H.S.; Kim, K.S. [Dreaming and Challenging Co., Changwon (Korea); Jeon, J.H. [Korea Inst. of Machinery and Materials, Changwon (Korea)

2004-07-01

Four kinds of raw C/C composites with a density between 1.25{proportional_to}1.66 g/cm{sup 3} were used in order to investigate the effect of the initial porosity of C/C composites on mechanical properties of liquid silicon infiltrated C/SiC composites. The microstructure observation, image analysis and flexural strength test of the composites were performed. The density and microstructural changes with the variation of the initial porosity was discussed in the terms of the infiltration behavior of liquid silicon and the reaction between liquid silicon and matrix carbon. (orig.)

Maitra-Burke example of initial-state dependence in time-dependent density-functional theory

International Nuclear Information System (INIS)

Holas, A.; Balawender, R.

2002-01-01

In a recent paper, Maitra and Burke [Phys. Rev. A 63, 042501 (2001); 64, 039901(E) (2001)] have given an interesting and instructive example that illustrates a specific feature of the time-dependent density-functional theory--the dependence of the reconstructed time-dependent potential not only on the electron density, but also on the initial state of the system. However, a concise form of its presentation by these authors is insufficient to reveal all its peculiarities. Our paper represents a very detailed study of this valuable example, intended to facilitate a better understanding and appreciation

Measuring the value of process improvement initiatives in a preoperative assessment center using time-driven activity-based costing.

Science.gov (United States)

French, Katy E; Albright, Heidi W; Frenzel, John C; Incalcaterra, James R; Rubio, Augustin C; Jones, Jessica F; Feeley, Thomas W

2013-12-01

The value and impact of process improvement initiatives are difficult to quantify. We describe the use of time-driven activity-based costing (TDABC) in a clinical setting to quantify the value of process improvements in terms of cost, time and personnel resources. Difficulty in identifying and measuring the cost savings of process improvement initiatives in a Preoperative Assessment Center (PAC). Use TDABC to measure the value of process improvement initiatives that reduce the costs of performing a preoperative assessment while maintaining the quality of the assessment. Apply the principles of TDABC in a PAC to measure the value, from baseline, of two phases of performance improvement initiatives and determine the impact of each implementation in terms of cost, time and efficiency. Through two rounds of performance improvements, we quantified an overall reduction in time spent by patient and personnel of 33% that resulted in a 46% reduction in the costs of providing care in the center. The performance improvements resulted in a 17% decrease in the total number of full time equivalents (FTE's) needed to staff the center and a 19% increase in the numbers of patients assessed in the center. Quality of care, as assessed by the rate of cancellations on the day of surgery, was not adversely impacted by the process improvements. © 2013 Published by Elsevier Inc.

Real-time observation of the initiation of RNA polymerase II transcription.

Science.gov (United States)

Fazal, Furqan M; Meng, Cong A; Murakami, Kenji; Kornberg, Roger D; Block, Steven M

2015-09-10

Biochemical and structural studies have shown that the initiation of RNA polymerase II transcription proceeds in the following stages: assembly of the polymerase with general transcription factors and promoter DNA in a 'closed' preinitiation complex (PIC); unwinding of about 15 base pairs of the promoter DNA to form an 'open' complex; scanning downstream to a transcription start site; synthesis of a short transcript, thought to be about 10 nucleotides long; and promoter escape. Here we have assembled a 32-protein, 1.5-megadalton PIC derived from Saccharomyces cerevisiae, and observe subsequent initiation processes in real time with optical tweezers. Contrary to expectation, scanning driven by the transcription factor IIH involved the rapid opening of an extended transcription bubble, averaging 85 base pairs, accompanied by the synthesis of a transcript up to the entire length of the extended bubble, followed by promoter escape. PICs that failed to achieve promoter escape nevertheless formed open complexes and extended bubbles, which collapsed back to closed or open complexes, resulting in repeated futile scanning.

Time evolution of one-dimensional gapless models from a domain wall initial state: stochastic Loewner evolution continued?

International Nuclear Information System (INIS)

Calabrese, Pasquale; Hagendorf, Christian; Doussal, Pierre Le

2008-01-01

We study the time evolution of quantum one-dimensional gapless systems evolving from initial states with a domain wall. We generalize the path integral imaginary time approach that together with boundary conformal field theory allows us to derive the time and space dependence of general correlation functions. The latter are explicitly obtained for the Ising universality class, and the typical behavior of one- and two-point functions is derived for the general case. Possible connections with the stochastic Loewner evolution are discussed and explicit results for one-point time dependent averages are obtained for generic κ for boundary conditions corresponding to stochastic Loewner evolution. We use this set of results to predict the time evolution of the entanglement entropy and obtain the universal constant shift due to the presence of a domain wall in the initial state

Mammalian poly(A)-binding protein is a eukaryotic translation initiation factor, which acts via multiple mechanisms.

Science.gov (United States)

Kahvejian, Avak; Svitkin, Yuri V; Sukarieh, Rami; M'Boutchou, Marie-Noël; Sonenberg, Nahum

2005-01-01

Translation initiation is a multistep process involving several canonical translation factors, which assemble at the 5'-end of the mRNA to promote the recruitment of the ribosome. Although the 3' poly(A) tail of eukaryotic mRNAs and its major bound protein, the poly(A)-binding protein (PABP), have been studied extensively, their mechanism of action in translation is not well understood and is confounded by differences between in vivo and in vitro systems. Here, we provide direct evidence for the involvement of PABP in key steps of the translation initiation pathway. Using a new technique to deplete PABP from mammalian cell extracts, we show that extracts lacking PABP exhibit dramatically reduced rates of translation, reduced efficiency of 48S and 80S ribosome initiation complex formation, and impaired interaction of eIF4E with the mRNA cap structure. Supplementing PABP-depleted extracts with wild-type PABP completely rectified these deficiencies, whereas a mutant of PABP, M161A, which is incapable of interacting with eIF4G, failed to restore translation. In addition, a stronger inhibition (approximately twofold) of 80S as compared to 48S ribosome complex formation (approximately 65% vs. approximately 35%, respectively) by PABP depletion suggests that PABP plays a direct role in 60S subunit joining. PABP can thus be considered a canonical translation initiation factor, integral to initiation complex formation at the 5'-end of mRNA.

Analysis of grain growth process in melt spun Fe-B alloys under the initial saturated grain boundary segregation condition

International Nuclear Information System (INIS)

Chen, Z.; Liu, F.; Yang, X.Q.; Fan, Y.; Shen, C.J.

2012-01-01

Highlights: → We compared pure kinetic, pure thermodynamic and extended thermo-kinetic models. → An initial saturated GB segregation condition of nanoscale Fe-B alloys was determined. → The controlled-mechanism was proposed using two characteristic times (t 1 and t 2 ). - Abstract: A grain growth process in the melt spun low-solid-solubility Fe-B alloys was analyzed under the initial saturated grain boundary (GB) segregation condition. Applying melt spinning technique, single-phase supersaturated nanograins were prepared. Grain growth behavior of the single-phase supersaturated nanograins was investigated by performing isothermal annealing at 700 deg. C. Combined with the effect of GB segregation on the initial GB excess amount, the thermo-kinetic model [Chen et al., Acta Mater. 57 (2009) 1466] was extended to describe the initial GB segregation condition of nanoscale Fe-B alloys. In comparison of pure kinetic model, pure thermodynamic model and the extended thermo-kinetic model, an initial saturated GB segregation condition was determined. The controlled-mechanism of grain growth under initial saturated GB segregation condition was proposed using two characteristic annealing times (t 1 and t 2 ), which included a mainly kinetic-controlled process (t ≤ t 1 ), a transition from kinetic-mechanism to thermodynamic-mechanism (t 1 2 ) and pure thermodynamic-controlled process (t ≥ t 2 ).

Crack initiation at high temperature on an austenitic stainless steel

International Nuclear Information System (INIS)

Laiarinandrasana, L.

1994-01-01

The study deals with crack initiation at 600 degrees Celsius and 650 degrees Celsius, on an austenitic stainless steel referenced by Z2 CND 17 12. The behaviour laws of the studied plate were update in comparison with existing data. Forty tests were carried out on CT specimens, with continuous fatigue with load or displacement controlled, pure creep, pure relaxation, creep-fatigue and creep-relaxation loadings. The practical initiation definition corresponds to a small crack growth of about the grain size, monitored by electrical potential drop technique. The time necessary for the crack to initiate is predicted with fracture mechanics global and local approaches, with the helps of microstructural observations and finite elements results. An identification of a 'Paris'law' for continuous cyclic loading and of a unique correlation between the initiation time and C * k for creep tests was established. For the local approach, crack initiation by creep can be interpreted as the reaching of a critical damage level, by using a damage incremental rule. For creep-fatigue tests, crack growth rates at initiation are greater than those of Paris'law for continuous fatigue. A calculation of a transition time between elastic-plastic and creep domains shows that crack initiation can be interpreted whether by providing Paris'law with an acceleration term when the dwell period is less than the transition time, or by calculating a creep contribution which relies on C * k parameter when the dwell period and/or the initiation times are greater than the transition time. Creep relaxation tests present crack growth rates at initiation which are less than those for 'equivalent' creep-fatigue tests. These crack growth rates when increasing hold time, but also when temperature decreases. Though, for hold times which are important enough and at lower temperature, there is no effect of the dwell period insofar as crack growth rate is equal to continuous fatigue Paris law predicted ones

Quantum arrival time formula from decoherent histories

International Nuclear Information System (INIS)

Halliwell, J.J.; Yearsley, J.M.

2009-01-01

We use the decoherent histories approach to quantum mechanics to compute the probability for a wave packet to cross the origin during a given time interval. We define class operators (sums of strings of projectors) characterizing quantum-mechanical crossing and simplify them using a semiclassical approximation. Using these class operators we find that histories crossing the origin during different time intervals are approximately decoherent for a variety of initial states. Probabilities may therefore be assigned and coincide with the flux of the wave packet (the standard semiclassical formula), and are positive. The known initial states for which the flux is negative (backflow states) are shown to correspond to non-decoherent sets of histories, so probabilities may not be assigned.

Nonlinear Variation of Parameters Formula for Impulsive Differential Equations with Initial Time Difference and Application

Directory of Open Access Journals (Sweden)

Peiguang Wang

2014-01-01

Full Text Available This paper establishes variation of parameters formula for impulsive differential equations with initial time difference. As an application, one of the results is used to investigate stability properties of solutions.

Time to HAART Initiation after Diagnosis and Treatment of Opportunistic Infections in Patients with AIDS in Latin America.

Directory of Open Access Journals (Sweden)

Brenda Crabtree-Ramírez

Full Text Available Since 2009, earlier initiation of highly active antiretroviral therapy (HAART after an opportunistic infection (OI has been recommended based on lower risks of death and AIDS-related progression found in clinical trials. Delay in HAART initiation after OIs may be an important barrier for successful outcomes in patients with advanced disease. Timing of HAART initiation after an OI in "real life" settings in Latin America has not been evaluated.Patients in the Caribbean, Central and South America network for HIV Epidemiology (CCASAnet ≥18 years of age at enrolment, from 2001-2012 who had an OI before HAART initiation were included. Patients were divided in an early HAART (EH group (those initiating within 4 weeks of an OI and a delayed HAART (DH group (those initiating more than 4 weeks after an OI. All patients with an AIDS-defining OI were included. In patients with more than one OI the first event reported was considered. Calendar trends in the proportion of patients in the EH group (before and after 2009 were estimated by site and for the whole cohort. Factors associated with EH were estimated using multivariable logistic regression models.A total of 1457 patients had an OI before HAART initiation and were included in the analysis: 213 from Argentina, 686 from Brazil, 283 from Chile, 119 from Honduras and 156 from Mexico. Most prevalent OI were Tuberculosis (31%, followed by Pneumocystis pneumonia (24%, Invasive Candidiasis (16% and Toxoplasmosis (9%. Median time from OI to HAART initiation decreased significantly from 5.7 (interquartile range [IQR] 2.8-12.1 weeks before 2009 to 4.3 (IQR 2.0-7.1 after 2009 (p<0.01. Factors associated with starting HAART within 4 weeks of OI diagnosis were lower CD4 count at enrolment (p-<0.001, having a non-tuberculosis OI (p<0.001, study site (p<0.001, and more recent years of OI diagnosis (p<0.001.The time from diagnosis of an OI to HAART initiation has decreased in Latin America coinciding with the

Time Delay for the Initiation of an Emergency Shutdown at the Peruvian Nuclear Reactor RP-10

International Nuclear Information System (INIS)

Ramon, A.; Ovalle, E.; Canaza, D.; Salazar, A.; Zapata, A.; Felix, J.; Arrieta, R.; Vela, M.

2008-01-01

In this paper we show the measurement of the time delay for the initiation of an emergency shutdown state at the RP-10 Reactor. This time delay is the one corresponding to the delay between the detection of a signal of any fixed limit and the start of a protective action to get the reactor in a safety state. The experimental method used is based on monitoring two signals in an oscilloscope, one signal is the elected initiate event and the other is the de-energizing of electromagnets of the security bars. The time delay for each safety and control rods, was measured for seven energizing current values in a range of 36 - 52 mA. The results showed that the minimum value is (84 ± 1.26) ms and the maximum is (108 ± 1.60) ms. In all cases it is noted that, the delay time is less than the limit values prefixed down in the reactor safety report. (authors)

Time dependency of the prediction skill for the North Atlantic subpolar gyre in initialized decadal hindcasts

Science.gov (United States)

Brune, Sebastian; Düsterhus, André; Pohlmann, Holger; Müller, Wolfgang A.; Baehr, Johanna

2017-11-01

We analyze the time dependency of decadal hindcast skill in the North Atlantic subpolar gyre within the time period 1961-2013. We compare anomaly correlation coefficients and temporal interquartile ranges of total upper ocean heat content and sea surface temperature for three differently initialized sets of hindcast simulations with the global coupled model MPI-ESM. All initializations use weakly coupled assimilation with the same full value nudging in the atmospheric component and different assimilation techniques for oceanic temperature and salinity: (1) ensemble Kalman filter assimilating EN4 observations and HadISST data, (2) nudging of anomalies to ORAS4 reanalysis, (3) nudging of full values to ORAS4 reanalysis. We find that hindcast skill depends strongly on the evaluation time period, with higher hindcast skill during strong multiyear trends, especially during the warming in the 1990s and lower hindcast skill in the absence of such trends. Differences between the prediction systems are more pronounced when investigating any 20-year subperiod within the entire hindcast period. In the ensemble Kalman filter initialized hindcasts, we find significant correlation skill for up to 5-8 lead years, albeit along with an overestimation of the temporal interquartile range. In the hindcasts initialized by anomaly nudging, significant correlation skill for lead years greater than two is only found in the 1980s and 1990s. In the hindcasts initialized by full value nudging, correlation skill is consistently lower than in the hindcasts initialized by anomaly nudging in the first lead years with re-emerging skill thereafter. The Atlantic meridional overturning circulation reacts on the density changes introduced by oceanic nudging, this limits the predictability in the subpolar gyre in the first lead years. Overall, we find that a model-consistent assimilation technique can improve hindcast skill. Further, the evaluation of 20 year subperiods within the full hindcast period

Initial time singularities and admissible initial states for a system of coupled scalar fields

Energy Technology Data Exchange (ETDEWEB)

Baacke, Juergen [Technische Univ. Dortmund (Germany). Fakultaet Physik; Kevlishvili, Nina [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); GAS, Tbilisi (Georgia). Andronikashvili Inst. of Physics

2009-10-15

We discuss the problem of initial states for a system of coupled scalar fields out of equilibrium in the one-loop approximation. The fields consist of classical background fields, taken constant in space, and quantum fluctuations. If the initial state is the adiabatic vacuum, i.e., the ground state of a Fock space of particle excitations that diagonalize the mass matrix, the energy-momentum tensor is infinite at t=0, its most singular part behaves as 1/t. When the system is coupled to gravity this presents a problem that we solve by a Bogoliubov transformation of the naive initial state. As a side result we also discuss the canonical formalism and the adiabatic particle number for such a system. Most of the formalism is presented for Minkowksi space. Embedding the system and its dynamics into a flat FRW universe is straightforward and we briefly address the essential modifications. (orig.)

Initial time singularities and admissible initial states for a system of coupled scalar fields

International Nuclear Information System (INIS)

Baacke, Juergen; Kevlishvili, Nina; GAS, Tbilisi

2009-10-01

We discuss the problem of initial states for a system of coupled scalar fields out of equilibrium in the one-loop approximation. The fields consist of classical background fields, taken constant in space, and quantum fluctuations. If the initial state is the adiabatic vacuum, i.e., the ground state of a Fock space of particle excitations that diagonalize the mass matrix, the energy-momentum tensor is infinite at t=0, its most singular part behaves as 1/t. When the system is coupled to gravity this presents a problem that we solve by a Bogoliubov transformation of the naive initial state. As a side result we also discuss the canonical formalism and the adiabatic particle number for such a system. Most of the formalism is presented for Minkowksi space. Embedding the system and its dynamics into a flat FRW universe is straightforward and we briefly address the essential modifications. (orig.)

Stress-corrosion mechanisms in silicate glasses

International Nuclear Information System (INIS)

Ciccotti, Matteo

2009-01-01

The present review is intended to revisit the advances and debates in the comprehension of the mechanisms of subcritical crack propagation in silicate glasses almost a century after its initial developments. Glass has inspired the initial insights of Griffith into the origin of brittleness and the ensuing development of modern fracture mechanics. Yet, through the decades the real nature of the fundamental mechanisms of crack propagation in glass has escaped a clear comprehension which could gather general agreement on subtle problems such as the role of plasticity, the role of the glass composition, the environmental condition at the crack tip and its relation to the complex mechanisms of corrosion and leaching. The different processes are analysed here with a special focus on their relevant space and time scales in order to question their domain of action and their contribution in both the kinetic laws and the energetic aspects.

Alternate capping mechanisms for transcription of spring viremia of carp virus: evidence for independent mRNA initiation.

Science.gov (United States)

Gupta, K C; Roy, P

1980-01-01

Two alternate mechanisms of mRNA capping for spring viremia of carp virus have been observed. Under normal reaction conditions, a ppG residue of the capping GTP is transferred to a pA moiety of the 5' termini of mRNA transcripts. However, in reaction conditions where GppNHp is used instead of GTP, an alternate capping mechanism occurs whereby a pG residue of the capping GTP is transferred to a ppA moiety of the transcripts. The first mechanism is identical to that described previously for vesicular stomatitis virus (G. Abraham, D. P. Rhodes, and A. K. Banerjee, Nature [London] 255:37-40, 1975; A. K. Banerjee, S. A. Moyer, and D. P. Rhodes, Virology 61:547-558, 1974), and thus appears to be a conserved function during the evolution of rhabdoviruses. The alternate mechanism of capping indicates not only that capping can take place by two procedures, but also that the substrate termini have di- or triphosphate 5' ends, indicating that they are probably independently initiated. An analog of ATP, AppNHp, has been found to completely inhibit the initiation of transcription by spring viremia of carp virus, suggesting that a cleavage between the beta and gamma phosphates of ATP is essential for the initiation of transcription. However, in the presence of GppNHp, uncapped (ppAp and pppAp), capped (GpppAp), and capped methylated (m7GpppAmpAp and GpppAmpAp) transcripts are detected. Size analyses of oligodeoxythymidylic acid-cellulose-bound transcripts resolved by formamide gel electrophoresis demonstrated that full-size mRNA transcripts are synthesized as well as larger RNA species. The presence of GppNHp and S-adenosylhomocysteine in reaction mixtures did not have any effect on the type of unmethylated transcription products. Our results favor a transcription model postulated previously (D. H. L. Bishop, in H. Fraenkel-Conrat and R. R. Wagner, ed., Comprehensive Virology, vol. 10, Plenum Press, New York, 1977; D. H. L. Bishop and A. Flamand, in D. C. Burke and W. C. Russell

Relationship between transit time and mechanical properties of a cell through a stenosed microchannel.

Science.gov (United States)

Ye, Ting; Shi, Huixin; Phan-Thien, Nhan; Lim, Chwee Teck; Li, Yu

2018-01-24

The changes in the mechanical properties of a cell are not only the cause of some diseases, but can also be a biomarker for some disease states. In recent times, microfluidic devices with built-in constrictions have been widely used to measure these changes. The transit time in such devices, defined as the time that a cell takes to pass through a constriction, has been found to be a crucial factor associated with the cell mechanical properties. Here, we use smoothed dissipative particle dynamics (SDPD), a particle-based numerical method, to explore the relationship between the transit time and mechanical properties of a cell. Three expressions of the transit time are developed from our simulation data, with respect to the stenosed size of constrictions, the shear modulus and bending modulus of cells, respectively. We show that a convergent constriction (the inlet is wider than the outlet), and a sharp-corner constriction (the constriction outlet is narrow) are better in identifying the differences in the transit time of cells. Moreover, the transit time increases and gradually approaches a constant as the shear modulus of cells increases, but increases first and then decreases as the bending modulus increases. These results suggest that the mechanical properties of cells can indeed be measured by analyzing their transit time, based on the recommended microfluidic device.

Initial results from the NSTX Real-Time Velocity diagnostic

Science.gov (United States)

Podesta, M.; Bell, R. E.

2011-10-01

A new diagnostic for fast measurements of plasma rotation through active charge-exchange recombination spectroscopy (CHERS) was installed on NSTX. The diagnostic infers toroidal rotation from carbon ions undergoing charge-exchange with neutrals from a heating Neutral Beam (NB). Each of the 4 channels, distributed along the outer major radius, includes active views intercepting the NB and background views missing the beam. Estimated uncertainties in the measured velocity are system. Signals are acquired on 2 CCD detectors, each controlled by a dedicated PC. Spectra are fitted in real-time through a C++ processing code and velocities are made available to the Plasma Control System for future implementation of feedback on velocity. Results from the initial operation during the 2011 run are discussed, emphasizing the fast dynamics of toroidal rotation, e . g . during L-H mode transition and breaking caused by instabilities and by externally-imposed magnetic perturbations. Work supported by USDOE Contract No. DE-AC02-09CH11466.

Real-time virtual sonography (RVS)-guided vacuum-assisted breast biopsy for lesions initially detected with breast MRI.

Science.gov (United States)

Uematsu, Takayoshi

2013-12-01

To report on our initial experiences with a new method of real-time virtual sonography (RVS)-guided 11-gauge vacuum-assisted breast biopsy for lesions that were initially detected with breast MRI. RVS-guided 11-gauge vacuum-assisted biopsy is performed when a lesion with suspicious characteristics is initially detected with breast MRI and is occult on mammography, sonography, and physical examination. Live sonographic images were co-registered to the previously loaded second-look spine contrast-enhanced breast MRI volume data to correlate the sonography and MR images. Six lesions were examined in six consecutive patients scheduled to undergo RVS-guided 11-gauge vacuum-assisted biopsy. One patient was removed from the study because of non-visualization of the lesion in the second-look spine contrast-enhanced breast MRI. Five patients with non-mass enhancement lesions were biopsied. The lesions ranged in size from 9 to 13 mm (mean 11 mm). The average procedural time, including the sonography and MR image co-registration time, was 25 min. All biopsies resulted in tissue retrieval. One was fibroadenomatous nodules, and those of four were fibrocystic changes. There were no complications during or after the procedures. RVS-guided 11-gauge vacuum-assisted breast biopsies provide a safe and effective method for the examination of suspicious lesions initially detected with MRI.

Reducing the time until psychotherapy initiation reduces sick leave duration in participants diagnosed with anxiety and mood disorders.

Science.gov (United States)

Alonso, Sandra; Marco, José H; Andani, Joaquín

2018-01-01

Sick leave in patients with a mental disorder is characterized by having a long duration. Studies suggest that the time until a patient on sick leave for a common mental health disorder initiates evaluation and treatment by a healthcare professional is an important factor in the duration of the sick leave. However, in these studies, the intervention was not performed by a mental health specialist. The aim of this study was to find out whether the length of sick leave was associated with the time before initiating psychotherapy, age, time until returning to work after psychotherapy ends, and duration of psychotherapy. In a further analysis, we examined whether the model composed of age, duration of psychotherapy, and time before initiating psychotherapy predicted the length of sick leave. The sample consisted of 2,423 participants, 64.1% (n = 1,554) women and 35.9% (n = 869) men, who were on sick leave for anxiety disorders or depressive disorder. The total duration of the sick leave of participants diagnosed with depression and anxiety was positively associated with the time before beginning psychotherapy. Time before beginning psychotherapy predicted the length of sick leave when the variables age and duration of psychotherapy were controlled. It is necessary to reduce the time until beginning psychotherapy in people on sick leave for common mental disorders. Copyright © 2017 John Wiley & Sons, Ltd.

Mammalian poly(A)-binding protein is a eukaryotic translation initiation factor, which acts via multiple mechanisms

OpenAIRE

Kahvejian, Avak; Svitkin, Yuri V.; Sukarieh, Rami; M'Boutchou, Marie-Noël; Sonenberg, Nahum

2005-01-01

Translation initiation is a multistep process involving several canonical translation factors, which assemble at the 5′-end of the mRNA to promote the recruitment of the ribosome. Although the 3′ poly(A) tail of eukaryotic mRNAs and its major bound protein, the poly(A)-binding protein (PABP), have been studied extensively, their mechanism of action in translation is not well understood and is confounded by differences between in vivo and in vitro systems. Here, we provide direct evidence for ...

Generic mechanism of optimal energy transfer efficiency: a scaling theory of the mean first-passage time in exciton systems.

Science.gov (United States)

Wu, Jianlan; Silbey, Robert J; Cao, Jianshu

2013-05-17

An asymptotic scaling theory is presented using the conceptual basis of trapping-free subspace (i.e., orthogonal subspace) to establish the generic mechanism of optimal efficiency of excitation energy transfer in light-harvesting systems. A quantum state orthogonal to the trap will exhibit noise-assisted transfer, clarifying the significance of initial preparation. For such an initial state, the efficiency is enhanced in the weak damping limit (⟨t⟩ ∼ 1/Γ), and suppressed in the strong damping limit (⟨t⟩ ∼ Γ), analogous to Kramers turnover in classical rate theory. An interpolating expression ⟨t⟩ = A/Γ + B + CΓ quantitatively describes the trapping time over the entire range of the dissipation strength, and predicts the optimal efficiency at Γ(opt) ∼ J for homogenous systems. In the presence of static disorder, the scaling law of transfer time with respect to dephasing rate changes from linear to square root, suggesting a weaker dependence on the environment. The prediction of the scaling theory is verified in a symmetric dendrimer system by numerically exact quantum calculations. Though formulated in the context of excitation energy transfer, the analysis and conclusions apply in general to open quantum processes, including electron transfer, fluorescence emission, and heat conduction.

General aspects of the mechanical integrity of canisters

International Nuclear Information System (INIS)

Saario, Timo

2007-01-01

This paper attempts to introduce a new point of view to the mechanical integrity of the canisters, 'mechanical integrity evolutionary path'. The mechanical integrity evolutionary path is a description of development of the critical parameters involved in the prevailing degradation modes as a function of time. The degradation mechanisms considered are: mechanical overload; creep; and stress corrosion cracking. For each degradation mechanism one may consider two different states; initial state; critical state. The initial state considered will be different for different degradation mechanisms. For example stress corrosion cracking (SCC), which involves electrochemical steps is not possible without a surface covering aqueous phase. Thus, potentially, the initial state for SCC is that existing after saturation. On the other hand, the initial state for a possible mechanical overload can be different in different periods during the mechanical integrity evolutionary path. During the handling and transport stages the initial state is 'ex works', while during a glaciation the initial state has been altered due to creep, corrosion and possible SCC processes. The canister will go through mechanical overload during saturation and bentonite swelling phases and it will deform to fit the form of the insert. The initial state for this period is 'ex works', with e.g. manufacturing defects. The insert is designed to bear the load after closing the gap. In the 'ex works' state directionality of the mechanical properties has been raised lately as a new issue worth checking. Within the projected evolutionary path two events have been especially considered; seismic events and glaciation. A glacier 2 km thick would increase the hydrostatic pressure with 20 MPa if there were a mechanism transmitting the load into the aqueous phase. Remembering what makes ice skating possible such a mechanism seems plausible. For mechanical overload the critical state is relatively straightforward to

General aspects of the mechanical integrity of canisters

Energy Technology Data Exchange (ETDEWEB)

Saario, Timo [VTT Materials and Building (Finland)

2007-09-15

This paper attempts to introduce a new point of view to the mechanical integrity of the canisters, 'mechanical integrity evolutionary path'. The mechanical integrity evolutionary path is a description of development of the critical parameters involved in the prevailing degradation modes as a function of time. The degradation mechanisms considered are: mechanical overload; creep; and stress corrosion cracking. For each degradation mechanism one may consider two different states; initial state; critical state. The initial state considered will be different for different degradation mechanisms. For example stress corrosion cracking (SCC), which involves electrochemical steps is not possible without a surface covering aqueous phase. Thus, potentially, the initial state for SCC is that existing after saturation. On the other hand, the initial state for a possible mechanical overload can be different in different periods during the mechanical integrity evolutionary path. During the handling and transport stages the initial state is 'ex works', while during a glaciation the initial state has been altered due to creep, corrosion and possible SCC processes. The canister will go through mechanical overload during saturation and bentonite swelling phases and it will deform to fit the form of the insert. The initial state for this period is 'ex works', with e.g. manufacturing defects. The insert is designed to bear the load after closing the gap. In the 'ex works' state directionality of the mechanical properties has been raised lately as a new issue worth checking. Within the projected evolutionary path two events have been especially considered; seismic events and glaciation. A glacier 2 km thick would increase the hydrostatic pressure with 20 MPa if there were a mechanism transmitting the load into the aqueous phase. Remembering what makes ice skating possible such a mechanism seems plausible. For mechanical overload the critical

Barriers to timely initiation of breastfeeding among mothers of ...

African Journals Online (AJOL)

Routine labour ward and delivery table, specific assignment to the staff in the delivery/ labour rooms help newly delivered mothers initiate breastfeeding early, and empowering the to request for babies are recommended. Keywords: breastfeeding, initiation, barriers. Nigerian Journal of Clinical Practice Vol. 9(1) 2006: 57-64 ...

Time evolution of distribution functions in dissipative environments

International Nuclear Information System (INIS)

Hu Li-Yun; Chen Fei; Wang Zi-Sheng; Fan Hong-Yi

2011-01-01

By introducing the thermal entangled state representation, we investigate the time evolution of distribution functions in the dissipative channels by bridging the relation between the initial distribution function and the any time distribution function. We find that most of them are expressed as such integrations over the Laguerre—Gaussian function. Furthermore, as applications, we derive the time evolution of photon-counting distribution by bridging the relation between the initial distribution function and the any time photon-counting distribution, and the time evolution of R-function characteristic of nonclassicality depth. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

The problem of time quantum mechanics versus general relativity

CERN Document Server

Anderson, Edward

2017-01-01

This book is a treatise on time and on background independence in physics. It first considers how time is conceived of in each accepted paradigm of physics: Newtonian, special relativity, quantum mechanics (QM) and general relativity (GR). Substantial differences are moreover uncovered between what is meant by time in QM and in GR. These differences jointly source the Problem of Time: Nine interlinked facets which arise upon attempting concurrent treatment of the QM and GR paradigms, as is required in particular for a background independent theory of quantum gravity. A sizeable proportion of current quantum gravity programs - e.g. geometrodynamical and loop quantum gravity approaches to quantum GR, quantum cosmology, supergravity and M-theory - are background independent in this sense. This book's foundational topic is thus furthermore of practical relevance in the ongoing development of quantum gravity programs. This book shows moreover that eight of the nine facets of the Problem of Time already occur upon ...

Vibrant times for mechanical metamaterials

DEFF Research Database (Denmark)

Christensen, Johan; Kadic, Muamer; Kraft, Oliver

2015-01-01

Metamaterials are man-made designer matter that obtains its unusual effective properties by structure rather than chemistry. Building upon the success of electromagnetic and acoustic metamaterials, researchers working on mechanical metamaterials strive at obtaining extraordinary or extreme...... mass density, negative modulus, pentamode, anisotropic mass density, Origami, nonlinear, bistable, and reprogrammable mechanical metamaterials....

ATLAS level-1 calorimeter trigger hardware: initial timing and energy calibration

CERN Document Server

Childers, JT; The ATLAS collaboration

2010-01-01

The ATLAS Level-1 Calorimeter Trigger identifies high-pT objects in the Liquid Argon and Tile Calorimeters with a fixed latency of up to 2.4 microseconds using a hardware-based, pipelined system built with custom electronics. The Preprocessor Module conditions and digitizes about 7200 pre-summed analogue signals from the calorimeters at the LHC bunch-crossing frequency of 40 MHz, and performs bunch-crossing identification (BCID) and deposited energy measurement for each input signal. This information is passed to further processors for object classification and total energy calculation, and the results are used to make the Level-1 trigger decision for the ATLAS detector. The BCID and energy measurement in the trigger depend on precise timing adjustments to achieve correct sampling of the input signal peak. Test pulses from the calorimeters were analysed to derive the initial timing and energy calibration, and first data from the LHC restart in autumn 2009 and early 2010 were used for validation and further op...

Experiments on microsecond conduction time plasma opening switch mechanisms

International Nuclear Information System (INIS)

Rix, W.; Coleman, M.; Miller, A.R.; Parks, D.; Robertson, K.; Thompson, J.; Waisman, E.; Wilson, A.

1993-01-01

The authors describe a series of experiments carried out on ACE 2 and ACE 4 to elucidate the mechanisms controlling the conduction and opening phases on plasma opening switches in a radial geometry with conduction times on the order of a microsecond. The results indicate both conduction and opening physics are similar to that observed on lower current systems in a coaxial geometry

Exacerbation of Brain Injury by Post-Stroke Exercise Is Contingent Upon Exercise Initiation Timing

Directory of Open Access Journals (Sweden)

Fengwu Li

2017-10-01

Full Text Available Accumulating evidence has demonstrated that post-stroke physical rehabilitation may reduce morbidity. The effectiveness of post-stroke exercise, however, appears to be contingent upon exercise initiation. This study assessed the hypothesis that very early exercise exacerbates brain injury, induces reactive oxygen species (ROS generation, and promotes energy failure. A total of 230 adult male Sprague-Dawley rats were subjected to middle cerebral artery (MCA occlusion for 2 h, and randomized into eight groups, including two sham injury control groups, three non-exercise and three exercise groups. Exercise was initiated after 6 h, 24 h and 3 days of reperfusion. Twenty-four hours after completion of exercise (and at corresponding time points in non-exercise controls, infarct volumes and apoptotic cell death were examined. Early brain oxidative metabolism was quantified by examining ROS, ATP and NADH levels 0.5 h after completion of exercise. Furthermore, protein expressions of angiogenic growth factors were measured in order to determine whether post-stroke angiogenesis played a role in rehabilitation. As expected, ischemic stroke resulted in brain infarction, apoptotic cell death and ROS generation, and diminished NADH and ATP production. Infarct volumes and apoptotic cell death were enhanced (p < 0.05 by exercise that was initiated after 6 h of reperfusion, but decreased by late exercise (24 h, 3 days. This exacerbated brain injury at 6 h was associated with increased ROS levels (p < 0.05, and decreased (p < 0.05 NADH and ATP levels. In conclusion, very early exercise aggravated brain damage, and early exercise-induced energy failure with ROS generation may underlie the exacerbation of brain injury. These results shed light on the manner in which exercise initiation timing may affect post-stroke rehabilitation.

ATMOSPHERIC CIRCULATION OF HOT JUPITERS: INSENSITIVITY TO INITIAL CONDITIONS

International Nuclear Information System (INIS)

Liu Beibei; Showman, Adam P.

2013-01-01

The ongoing characterization of hot Jupiters has motivated a variety of circulation models of their atmospheres. Such models must be integrated starting from an assumed initial state, which is typically taken to be a wind-free, rest state. Here, we investigate the sensitivity of hot-Jupiter atmospheric circulation to initial conditions with shallow-water models and full three-dimensional models. Those models are initialized with zonal jets, and we explore a variety of different initial jet profiles. We demonstrate that, in both classes of models, the final, equilibrated state is independent of initial condition—as long as frictional drag near the bottom of the domain and/or interaction with a specified planetary interior are included so that the atmosphere can adjust angular momentum over time relative to the interior. When such mechanisms are included, otherwise identical models initialized with vastly different initial conditions all converge to the same statistical steady state. In some cases, the models exhibit modest time variability; this variability results in random fluctuations about the statistical steady state, but we emphasize that, even in these cases, the statistical steady state itself does not depend on initial conditions. Although the outcome of hot-Jupiter circulation models depend on details of the radiative forcing and frictional drag, aspects of which remain uncertain, we conclude that the specification of initial conditions is not a source of uncertainty, at least over the parameter range explored in most current models.

Importance of the time of initiation of mineralocorticoid receptor antagonists on risk of mortality in patients with heart failure.

Science.gov (United States)

Rossi, Rosario; Crupi, Nicola; Coppi, Francesca; Monopoli, Daniel; Sgura, Fabio

2015-03-01

Several studies have definitively shown the benefit of mineralocorticoid receptor antagonists (MRAs) in patients with heart failure (HF). However, very few prior studies examined the relationship between the timing of initiation of MRAs and prognosis. In addition, on this topic, there is no information regarding the specific population of patients suffering a first episode of decompensated congestive HF. We studied a homogenous cohort of patients discharged alive from our hospital after a first episode of decompensated congestive HF, in order to clarify the association between time of aldosterone receptor antagonist (ARA) initiation (within the first 90 days after hospital discharge) and mortality. Our population was composed of a series of consecutive patients. All-cause mortality was compared between patients who initiated MRAs at discharge (early group) and those who initiated MRAs one month later and up to 90 days after discharge (delayed group). We used prescription time distribution matching to control for survival difference between groups. The early and delayed groups consisted of 365 and 320 patients, respectively. During the one-year follow-up, a significant difference in mortality was demonstrated between groups. Adjusted hazard ratios (HRs) for early versus delayed initiation were 1.72 (95% confidence interval (CI) 0.96 to 2.84) at six months, and 1.93 (95% CI 1.18 to 3.14) at one year. Delay of MRA initiation up to 30 to 90 days after discharge implies a significant increase in mortality compared with MRA initiation at discharge, after a first episode of decompensate congestive HF. © The Author(s) 2013.

Numerical modelling of the time-dependent mechanical behaviour of softwood

DEFF Research Database (Denmark)

Engelund, Emil Tang

2010-01-01

When using wood as a structural material it is important to consider its time-dependent mechanical behaviour and to predict this behaviour for decades ahead. For this purpose, several rheological mathematical models, spanning from fairly simple to very complex ones, have been developed over...

The timing and role of initiation rites in preparing young people for adolescence and responsible sexual and reproductive behaviour in Malawi.

Science.gov (United States)

Munthali, Alister C; Zulu, Eliya M

2007-12-01

This paper examines timing of puberty and mechanisms through which society prepares adolescents to understand and deal with it in Malawi. Data from a national representative survey of adolescents and in-depth interviews also conducted with adolescents are used. SPSS was used to analyse survey data while N6 was used to analyse qualitative data. Results show that the onset of menarche in girls and various pubertal body changes in boys can be a cause of joy, excitement, or distress depending on how adolescents understand what this means to them at this critical stage when they start defining and comprehending their sexuality. Much more emphasis is put on educating girls about reproductive implications of menarche than on what is expected of boys as sexual beings, which may contribute to boys' greater indulgence in risky sexual behaviors than girls. The significance of initiation ceremonies in some communities provides an important platform through which programs can reach many adolescents and intervene, particularly in addressing the widely held notion among initiates that attending these ceremonies symbolizes that one is not a child anymore and can have sex.

Time-dependent chemo-electro-mechanical behavior of hydrogel-based structures

Science.gov (United States)

Leichsenring, Peter; Wallmersperger, Thomas

2018-03-01

Charged hydrogels are ionic polymer gels and belong to the class of smart materials. These gels are multiphasic materials which consist of a solid phase, a fluid phase and an ionic phase. Due to the presence of bound charges these materials are stimuli-responsive to electrical or chemical loads. The application of electrical or chemical stimuli as well as mechanical loads lead to a viscoelastic response. On the macroscopic scale, the response is governed by a local reversible release or absorption of water which, in turn, leads to a local decrease or increase of mass and a respective volume change. Furthermore, the chemo-electro-mechanical equilibrium of a hydrogel depends on the chemical composition of the gel and the surrounding solution bath. Due to the presence of bound charges in the hydrogel, this system can be understood as an osmotic cell where differences in the concentration of mobile ions in the gel and solution domain lead to an osmotic pressure difference. In the present work, a continuum-based numerical model is presented in order to describe the time-dependent swelling behavior of hydrogels. The numerical model is based on the Theory of Porous Media and captures the fluid-solid, fluid-ion and ion-ion interactions. As a direct consequence of the chemo-electro-mechanical equilibrium, the corresponding boundary conditions are defined following the equilibrium conditions. For the interaction of the hydrogel with surrounding mechanical structures, also respective jump condtions are formulated. Finaly, numerical results of the time-dependent behavior of a hydrogel-based chemo-sensor will be presented.

The effect warming time of mechanical properties and structural phase aluminum alloy nickel

International Nuclear Information System (INIS)

Husna Al Hasa, M.; Anwar Muchsin

2011-01-01

Ferrous aluminum alloys as fuel cladding will experience the process of heat treatment above the recrystallization temperature. Temperature and time of heat treatment will affect the nature of the metal. Heating time allows will affect change in mechanical properties, thermal and structure of the metal phase. This study aims to determine the effect of time of heat treatment on mechanical properties and phase metal alloys. Testing the mechanical properties of materials, especially violence done by the method of Vickers. Observation of microstructural changes made by metallographic-optical and phase structure were analyzed Based on the x-ray diffraction patterns Elemental analysis phase alloy compounds made by EDS-SEM. Test results show the nature of violence AlFeNiMg alloy by heating at 500°C with a warm-up time 1 hour, 2 hours and 3 hours respectively decreased range 94.4 HV, 87.6 HV and 85.1 HV. The nature of violence AlFeNi alloy showed a decrease in line with the longer heating time. Metallographic-optical observations show the microstructural changes with increasing heating time. Microstructure shows the longer the heating time trend equi axial shaped grain structure of growing and the results showed a trend analyst diffraction pattern formation and phase θ α phase (FeAl3) in the alloy. (author)

Regulatory T cells predict the time to initial treatment in early stage chronic lymphocytic leukemia.

Science.gov (United States)

Weiss, Lukas; Melchardt, Thomas; Egle, Alexander; Grabmer, Christoph; Greil, Richard; Tinhofer, Inge

2011-05-15

Early stage chronic lymphocytic leukemia is characterized by a highly variable course of disease. Because it is believed that regulatory T cells (T(regs) ) are potent suppressors of antitumor immunity, the authors hypothesized that increased T(regs) may favor disease progression. T(reg) levels (cluster of differentiation 3 [CD3]-positive, [CD4]-positive, CD25-positive, and CD127-negative) in peripheral blood from 102 patients were analyzed by flow cytometry. Statistical analysis was used to evaluate correlations with clinical data. The relative T(reg) numbers in CD4-positive T cells were significantly greater in patients with chronic lymphocytic leukemia compared with the numbers in a control group of 170 healthy individuals (P = .001). Patients were divided into 2 groups using a median T(reg) value of 9.7% (the percentage of CD4-positive T cells). Patients with higher T(reg) levels had a significantly shorter time to initial treatment (median, 5.9 years) compared with patients who had lower T(reg) levels (median, 11.7 years; log-rank P = .019). Furthermore, T(reg) levels (the percentage of CD4-positive T cells) had significant prognostic power to predict the time to initial treatment in univariate analysis (P = .023) and in multivariate Cox regression analysis that included the variables Rai stage, immunoglobulin heavy-chain variable region gene mutational status, chromosomal aberrations, and CD38 expression (P = .028). Higher T(reg) levels had significant and independent prognostic power for predicting the time to initial treatment in patients with low to intermediate stage chronic lymphocytic leukemia. 2010 American Cancer Society.

Co-culture microorganisms with different initial proportions reveal the mechanism of chalcopyrite bioleaching coupling with microbial community succession.

Science.gov (United States)

Ma, Liyuan; Wang, Xingjie; Feng, Xue; Liang, Yili; Xiao, Yunhua; Hao, Xiaodong; Yin, Huaqun; Liu, Hongwei; Liu, Xueduan

2017-01-01

The effect of co-culture microorganisms with different initial proportions on chalcopyrite bioleaching was investigated. Communities were rebuilt by six typical strains isolated from the same habitat. The results indicated, by community with more sulfur oxidizers at both 30 and 40°C, the final copper extraction rate was 19.8% and 6.5% higher, respectively, than that with more ferrous oxidizers. The variations of pH, redox potential, ferrous and copper ions in leachate also provided evidences that community with more sulfur oxidizers was more efficient. Community succession of free and attached cells revealed that initial proportions played decisive roles on community dynamics at 30°C, while communities shared similar structures, not relevant to initial proportions at 40°C. X-ray diffraction analysis confirmed different microbial functions on mineral surface. A mechanism model for chalcopyrite bioleaching was established coupling with community succession. This will provide theoretical basis for reconstructing an efficient community in industrial application. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Neuro-Mechanical Processes That Underlie Goal-Directed Medio-Lateral APA during Gait Initiation.

Science.gov (United States)

Honeine, Jean-Louis; Schieppati, Marco; Crisafulli, Oscar; Do, Manh-Cuong

2016-01-01

Gait initiation (GI) involves passing from bipedal to unipedal stance. It requires a rapid movement of the center of foot pressure (CoP) towards the future swing foot and of the center of mass (CoM) in the direction of the stance foot prior to the incoming step. This anticipatory postural adjustment (APA) allows disengaging the swing leg from the ground and establishing favorable conditions for stepping. This study aimed to describe the neuro-mechanical process that underlies the goal-directed medio-lateral (ML) APA. We hypothesized that controlled knee flexion of the stance leg contributes to the initial ML displacement of the CoP and to the calibration of the first step. Fourteen subjects initiated gait starting from three different initial stance widths of 15 cm (Small), 30 cm (Medium), and 45 cm (Large). Optoelectronic, force platform and electromyogram (EMG) measurements were performed. During APA, soleus activity diminished bilaterally, while tibialis anterior (TA) activity increased, more so in the stance leg than in the swing leg, and to a larger extent with increasing initial stance width. Knee flexion of the stance leg was observed during APA and correlated with the ML CoP displacement towards the swing leg. ML CoP and CoM displacements during APA increased with increasing stance width. The activity of stance-leg TA was correlated with the degree of knee flexion. Swing-leg tensor fasciae latae (TFL) was also active during APA. Across subjects, when stance-leg tibialis activity was low, TFL activity was large and vice versa. The modulation of the ML CoP position during APA allowed the gravity-driven torque to place the CoM just lateral to the stance foot during step execution. Accordingly, the gravity-driven torque, the ML CoM velocity during step execution, and the step width at foot contact (FC) were lower in the Small and greater in the Large condition. Consequently, the position of the stepping foot at FC remained close to the sagittal plane in all

Communication: importance sampling including path correlation in semiclassical initial value representation calculations for time correlation functions.

Science.gov (United States)

Pan, Feng; Tao, Guohua

2013-03-07

Full semiclassical (SC) initial value representation (IVR) for time correlation functions involves a double phase space average over a set of two phase points, each of which evolves along a classical path. Conventionally, the two initial phase points are sampled independently for all degrees of freedom (DOF) in the Monte Carlo procedure. Here, we present an efficient importance sampling scheme by including the path correlation between the two initial phase points for the bath DOF, which greatly improves the performance of the SC-IVR calculations for large molecular systems. Satisfactory convergence in the study of quantum coherence in vibrational relaxation has been achieved for a benchmark system-bath model with up to 21 DOF.

Regional changes over time in initial virologic response rates to combination antiretroviral therapy across Europe

DEFF Research Database (Denmark)

Bannister, Wendy P; Kirk, Ole; Gatell, Jose M

2006-01-01

BACKGROUND: Changes in virologic response to initial combination antiretroviral therapy (cART) over calendar time may indicate improvements in cART or emergence of primary resistance. Regional variations may identify differences in available antiretroviral drugs or patient management. METHODS: Vi...... rates Udgivelsesdato: 2006/6...

Pricing mechanism for real-time balancing in regional electricity markets

NARCIS (Netherlands)

De Weerdt, M.M.; Ketter, W.; Collins, J.

2011-01-01

We consider the problem of designing a pricing mechanism for precisely controlling the real-time balance in electricity markets, where retail brokers aggregate the supply and demand of a number of individual customers, and must purchase or sell power at the wholesale level such that the total supply

Respiratory system dynamical mechanical properties: modeling in time and frequency domain.

Science.gov (United States)

Carvalho, Alysson Roncally; Zin, Walter Araujo

2011-06-01

The mechanical properties of the respiratory system are important determinants of its function and can be severely compromised in disease. The assessment of respiratory system mechanical properties is thus essential in the management of some disorders as well as in the evaluation of respiratory system adaptations in response to an acute or chronic process. Most often, lungs and chest wall are treated as a linear dynamic system that can be expressed with differential equations, allowing determination of the system's parameters, which will reflect the mechanical properties. However, different models that encompass nonlinear characteristics and also multicompartments have been used in several approaches and most specifically in mechanically ventilated patients with acute lung injury. Additionally, the input impedance over a range of frequencies can be assessed with a convenient excitation method allowing the identification of the mechanical characteristics of the central and peripheral airways as well as lung periphery impedance. With the evolution of computational power, the airway pressure and flow can be recorded and stored for hours, and hence continuous monitoring of the respiratory system mechanical properties is already available in some mechanical ventilators. This review aims to describe some of the most frequently used models for the assessment of the respiratory system mechanical properties in both time and frequency domain.

The coordination between mechanical and chemical subsystems initiates locomotion of Physarum plasmodial fragments

Science.gov (United States)

Zhang, Shun; Guy, Robert; Del Alamo, Juan Carlos

2017-11-01

Physarum polycephalum is a multinucleated slime mold whose endoplasm flows periodically driven by the contraction of its ectoplasm, a dense shell of F-actin cross-linked by myosin molecular motors and attached to the cell membrane. We find that physarum fragments smaller than 100 microns remain round and stay in place. However, larger fragments break symmetry leading to sustained forward locomotion, in process that is reminiscent of an interfacial instability that seems to settle around two different limit cycles (traveling waves and standing waves). We use both theory and experiments to study how coordination emerges between the different mechanical and chemical subsystems of the fragment to initiate locomotion. The role of many involved factors, such as fragment size, substratum adhesiveness, rheological properties, actin polymerization and traction stresses are investigated, and we find they agree well with our predictive model.

Modeling of SCC initiation and propagation mechanisms in BWR environments

Energy Technology Data Exchange (ETDEWEB)

Hoffmeister, Hans, E-mail: Hans.Hoffmeister@hsu-hh.de [Institute for Failure Analysis and Failure Prevention ISSV e.V., c/o Helmut Schmidt University of the Federal Armed Forces, D-22039 Hamburg (Germany); Klein, Oliver [Institute for Failure Analysis and Failure Prevention ISSV e.V., c/o Helmut Schmidt University of the Federal Armed Forces, D-22039 Hamburg (Germany)

2011-12-15

Highlights: Black-Right-Pointing-Pointer We show that SSC in BWR environments includes anodic crack propagation and hydrogen assisted cracking. Black-Right-Pointing-Pointer Hydrogen cracking is triggered by crack tip acidification following local impurity accumulations and subsequent phase precipitations. Black-Right-Pointing-Pointer We calculate effects of pH, chlorides, potentials and stress on crack SCC growth rates at 288 Degree-Sign C. - Abstract: During operation of mainly BWRs' (Boiling Water Reactors) excursions from recommended water chemistries may provide favorite conditions for stress corrosion cracking (SCC). Maximum levels for chloride and sulfate ion contents for avoiding local corrosion are therefore given in respective water specifications. In a previously published deterministic 288 Degree-Sign C - corrosion model for Nickel as a main alloying element of BWR components it was demonstrated that, as a theoretically worst case, bulk water chloride levels as low as 30 ppb provide local chloride ion accumulation, dissolution of passivating nickel oxide and precipitation of nickel chlorides followed by subsequent local acidification. In an extension of the above model to SCC the following work shows that, in a first step, local anodic path corrosion with subsequent oxide breakdown, chloride salt formation and acidification at 288 Degree-Sign C would establish local cathodic reduction of accumulated hydrogen ions inside the crack tip fluid. In a second step, local hydrogen reduction charges and increasing local crack tip strains from increasing crack lengths at given global stresses are time stepwise calculated and related to experimentally determined crack critical cathodic hydrogen charges and fracture strains taken from small scale SSRT tensile tests pieces. As a result, at local hydrogen equilibrium potentials higher than those of nickel in the crack tip solution, hydrogen ion reduction initiates hydrogen crack propagation that is enhanced with

Initial-boundary value problems for multi-term time-fractional diffusion equations with x-dependent coefficients

OpenAIRE

Li, Zhiyuan; Huang, Xinchi; Yamamoto, Masahiro

2018-01-01

In this paper, we discuss an initial-boundary value problem (IBVP) for the multi-term time-fractional diffusion equation with x-dependent coefficients. By means of the Mittag-Leffler functions and the eigenfunction expansion, we reduce the IBVP to an equivalent integral equation to show the unique existence and the analyticity of the solution for the equation. Especially, in the case where all the coefficients of the time-fractional derivatives are non-negative, by the Laplace and inversion L...

Stochastic mechanics of mixed states

International Nuclear Information System (INIS)

Jaekel, M.T.; Pignon, D.

1984-01-01

Nelson's stochastic interpretation of quantum mechanics is extended from the case of pure states to that of mixed states. It is shown that a pure probabilistic formalism, which applies the Newton-Nelson Law to the initial position and velocity distributions, does not reproduce the time evolution predicted by quantum mechanics. In order to recover the latter, a new notion must be introduced, that of pure quantum states, over which the mixture has to be decomposed, and which then satisfy the Newton-Nelson Law independently. (author)

Single-molecule packaging initiation in real time by a viral DNA packaging machine from bacteriophage T4.

Science.gov (United States)

Vafabakhsh, Reza; Kondabagil, Kiran; Earnest, Tyler; Lee, Kyung Suk; Zhang, Zhihong; Dai, Li; Dahmen, Karin A; Rao, Venigalla B; Ha, Taekjip

2014-10-21

Viral DNA packaging motors are among the most powerful molecular motors known. A variety of structural, biochemical, and single-molecule biophysical approaches have been used to understand their mechanochemistry. However, packaging initiation has been difficult to analyze because of its transient and highly dynamic nature. Here, we developed a single-molecule fluorescence assay that allowed visualization of packaging initiation and reinitiation in real time and quantification of motor assembly and initiation kinetics. We observed that a single bacteriophage T4 packaging machine can package multiple DNA molecules in bursts of activity separated by long pauses, suggesting that it switches between active and quiescent states. Multiple initiation pathways were discovered including, unexpectedly, direct DNA binding to the capsid portal followed by recruitment of motor subunits. Rapid succession of ATP hydrolysis was essential for efficient initiation. These observations have implications for the evolution of icosahedral viruses and regulation of virus assembly.

A time-based admission control mechanism for IEEE 802.11 ad Hoc networks

OpenAIRE

Costa, Luís Henrique M. K.; Cerveira, Carlos Rodrigo

2006-01-01

This paper presents a time-based admission control mechanism (TAC) for IEEE 802.11 ad hoc networks. The proposed mechanism was adapted to the QoS AODV routing protocol, which takes the quality of service requirements of the data flow into account in the route discovery process. TAC-AODV estimates the idle time of the physical medium based on the frames listened. The incoming traffic is admitted according to the offered load as well as the intra-flow interference, calculated based on the numbe...

ATLAS level-1 calorimeter trigger hardware: initial timing and energy calibration

International Nuclear Information System (INIS)

Childers, J T

2011-01-01

The ATLAS Level-1 Calorimeter Trigger identifies high-pT objects in the Liquid Argon and Tile Calorimeters with a fixed latency of up to 2.5μs using a hardware-based, pipelined system built with custom electronics. The Preprocessor Module conditions and digitizes about 7200 pre-summed analogue signals from the calorimeters at the LHC bunch-crossing frequency of 40 MHz, and performs bunch-crossing identification (BCID) and deposited energy measurement for each input signal. This information is passed to further processors for object classification and total energy calculation, and the results are used to make the Level-1 trigger decision for the ATLAS detector. The BCID and energy measurement in the trigger depend on precise timing adjustments to achieve correct sampling of the input signal peak. Test pulses from the calorimeters were analysed to derive the initial timing and energy calibration, and first data from the LHC restart in autumn 2009 and early 2010 were used for validation and further optimization. The results from these calibration measurements are presented.

Fabrication of thin SU-8 cantilevers: initial bending, release and time stability

International Nuclear Information System (INIS)

Keller, Stephan; Boisen, Anja; Haefliger, Daniel

2010-01-01

SU-8 cantilevers with a thickness of 2 µm were fabricated using a dry release method and two steps of SU-8 photolithography. The processing of the thin SU-8 film defining the cantilevers was experimentally optimized to achieve low initial bending due to residual stress gradients. In parallel, the rotational deformation at the clamping point allowed a qualitative assessment of the device release from the fluorocarbon-coated substrate. The change of these parameters during several months of storage at ambient temperature was investigated in detail. The introduction of a long hard bake in an oven after development of the thin SU-8 film resulted in reduced cantilever bending due to removal of residual stress gradients. Further, improved time-stability of the devices was achieved due to the enhanced cross-linking of the polymer. A post-exposure bake at a temperature T PEB = 50 °C followed by a hard bake at T HB = 90 °C proved to be optimal to ensure low cantilever bending and low rotational deformation due to excellent device release and low change of these properties with time. With the optimized process, the reproducible fabrication of arrays with 2 µm thick cantilevers with a length of 500 µm and an initial bending of less than 20 µm was possible. The theoretical spring constant of these cantilevers is k = 4.8 ± 2.5 mN m −1 , which is comparable to the value for Si cantilevers with identical dimensions and a thickness of 500 nm.

Time to ART Initiation among Patients Treated for Rifampicin-Resistant Tuberculosis in Khayelitsha, South Africa: Impact on Mortality and Treatment Success.

Science.gov (United States)

Daniels, Johnny Flippie; Khogali, Mohammed; Mohr, Erika; Cox, Vivian; Moyo, Sizulu; Edginton, Mary; Hinderaker, Sven Gudmund; Meintjes, Graeme; Hughes, Jennifer; De Azevedo, Virginia; van Cutsem, Gilles; Cox, Helen Suzanne

2015-01-01

Khayelitsha, South Africa, with high burdens of rifampicin-resistant tuberculosis (RR-TB) and HIV co-infection. To describe time to antiretroviral treatment (ART) initiation among HIV-infected RR-TB patients initiating RR-TB treatment and to assess the association between time to ART initiation and treatment outcomes. A retrospective cohort study of patients with RR-TB and HIV co-infection not on ART at RR-TB treatment initiation. Of the 696 RR-TB and HIV-infected patients initiated on RR-TB treatment between 2009 and 2013, 303 (44%) were not on ART when RR-TB treatment was initiated. The median CD4 cell count was 126 cells/mm3. Overall 257 (85%) patients started ART during RR-TB treatment, 33 (11%) within 2 weeks, 152 (50%) between 2-8 weeks and 72 (24%) after 8 weeks. Of the 46 (15%) who never started ART, 10 (21%) died or stopped RR-TB treatment within 4 weeks and 16 (37%) had at least 4 months of RR-TB treatment. Treatment success and mortality during treatment did not vary by time to ART initiation: treatment success was 41%, 43%, and 50% among patients who started ART within 2 weeks, between 2-8 weeks, and after 8 weeks (p = 0.62), while mortality was 21%, 13% and 15% respectively (p = 0.57). Mortality was associated with never receiving ART (adjusted hazard ratio (aHR) 6.0, CI 2.1-18.1), CD4 count ≤100 (aHR 2.1, CI 1.0-4.5), and multidrug-resistant tuberculosis (MDR-TB) with second-line resistance (aHR 2.5, CI 1.1-5.4). Despite wide variation in time to ART initiation among RR-TB patients, no differences in mortality or treatment success were observed. However, a significant proportion of patients did not initiate ART despite receiving >4 months of RR-TB treatment. Programmatic priorities should focus on ensuring all patients with RR-TB/HIV co-infection initiate ART regardless of CD4 count, with special attention for patients with CD4 counts ≤ 100 to initiate ART as soon as possible after RR-TB treatment initiation.

Initial clinical experience with a 64-MDCT whole-body scanner in an emergency department: better time management and diagnostic quality?

Science.gov (United States)

Rieger, Michael; Czermak, Benedikt; El Attal, Rene; Sumann, Günther; Jaschke, Werner; Freund, Martin

2009-03-01

The objective of this study was to assess time management and diagnostic quality when using a 64-multidetector-row computed tomography (MDCT) whole-body scanner to evaluate polytraumatized patients in an emergency department. Eighty-eight consecutive polytraumatized patients with injury severity score (ISS) > or = 18 (mean ISS = 29) were included in this study. Documented and evaluated data were crash history, trauma mechanism, number and pattern of injuries, injury severity, diagnostics, time flow, and missed diagnoses. Data were stored in our hospital information system. Seven time intervals were evaluated. In particular, attention was paid to the "acquisition interval," the "reformatting and evaluation time" as well as the "CT time" (time from CT start to preliminary diagnosis). A standardized whole-body CT was performed. The acquired CT data together with automatically generated multiplanar reformatted images ("direct MPR") were transferred to a 3D rendering workstation. Diagnostic quality was determined on the basis of missed diagnoses. Head-to-toe scout images were possible because volume coverage was up to 2 m. Experienced radiologists at an affiliated workstation performed radiologic evaluation of the acquired datasets immediately after acquisition. The "acquisition interval" was 12 minutes +/- 4.9 minutes, the "reformatting and evaluation interval" 7.0 minutes +/- 2.1 minutes, and the "CT time" 19 minutes +/- 6.1 minutes. Altogether, 7 of 486 lesions were recognized but not communicated in the "reformatting and evaluation interval", and 10 injuries were initially missed and detected during follow-up. This study indicates that 64-MDCT saves time, especially in the "reformatting and evaluation interval." Diagnostic quality is high, as reflected by the small number of missed diagnoses.

Correlations of norbornenyl crosslinked polyimide resin structures with resin thermo-oxidative stability, resin glass transition temperature and composite initial mechanical properties

Science.gov (United States)

Alston, William B.

1988-01-01

PMR (polymerization of monomeric reactants) methodology was used to prepare 70 different polyimide oligomeric resins and 30 different unidirectional graphite fiber/polyimide composites. Monomeric composition as well as chain length between sites of crosslinks were varied to examine their effects on resin thermo-oxidative stability and glass transition temperature (Tg) of the cured/postcured resins. A linear correlation of decreasing 316 C resin weight loss/surface area versus (1) decreasing aliphatic content, or (2) increasing benzylic/aliphatic content stoichiometry ratio over a wide range of resin compositions was observed. An almost linear correlation of Tg versus molecular distance between the crosslinks was also observed. An attempt was made to correlate Tg with initial composite mechanical properties (flexural strength and interlaminar shear strength). However, the scatter in mechanical strength data prevented obtaining a clear correlation. Instead, only a range of composite mechanical properties was obtained at 25, 288, and 316 C. Perhaps more importantly, what did become apparent during the correlation study was (1) the PMR methodology could be used to prepare composites from resins containing a wide variety of monomer modifications, (2) that these composites almost invariably provided satisfactory initial mechanical properties as long as the resins formulated exhibited satisfactory processing flow, and (3) that PMR resins exhibited predictable rates of 316 C weight loss/surface area based on their benzylic/aliphatic stoichiometery ratio.

Patterns and Timing of Initial Relapse in Patients Subsequently Undergoing Transplantation for Hodgkin's Lymphoma

International Nuclear Information System (INIS)

Dhakal, Sughosh; Biswas, Tithi; Liesveld, Jane L.; Friedberg, Jonathan W.; Phillips, Gordon L.; Constine, Louis S.

2009-01-01

Purpose: To evaluate the patterns and timing of initial recurrence in patients with Hodgkin's lymphoma (HL) who subsequently underwent high-dose chemotherapy with autologous stem cell transplantation to enhance our understanding of the natural history of this disease and its modern treatment strategies and to direct approaches to disease surveillance. Methods and Materials: The records of 69 patients with HL who had undergone high-dose chemotherapy with autologous stem cell transplantation in our center between May 1992 and June 2006 were analyzed. The initial diagnosis had been made between April 1982 and January 2005 at a median patient age of 33 years (range, 19-65). The patients were segregated according to the initial stage (Stage I-II vs. III-IV). Results: Early-stage HL patients developed a relapse at a median of 2.1 years (range, 0.5-10.3), with 91% of relapses at the initial disease site, 71% of which (65% overall) were only in previously involved sites. Advanced-stage HL patients developed a relapse at a median of 1.5 years (range, 0.6-10.5), with 97% at the initial site, 71% of which (69% overall) were only in previously involved sites. Single-site relapses occurred in 47% of early- vs. 26% of advanced-stage patients, and extranodal relapses occurred in 12% of early- vs. 31% of advanced-stage patients. Conclusions: Almost all patients with HL who develop relapse and subsequently undergo high-dose chemotherapy with autologous stem cell transplantation initially developed recurrence in previously involved disease sites. Early-stage HL relapses often occurred in single sites, and advanced-stage disease relapses were more likely in multiple and extranodal sites. The interval to recurrence was brief, suggesting that the frequency of screening should be the greatest in the early post-therapy years.

A time relay

Energy Technology Data Exchange (ETDEWEB)

Yosimura, K.; Sudzuki, Y.

1981-06-18

The synchronous micromotor of the time relay by means of a two staged cylindrical gear drive drives the gear wheel and the shaft of an actuating mechanism. The shaped drum of a cam mechanism, equipped with a vertical groove, which interacts in its upper part with a lever for driving the first commutating subassembly and in the lower, with a bent sector of a spring and plate movable contact of the second commutating subassembly, is attached to the lower end of the mechanism's shaft (V). The L-shaped lever of the second commutating subassembly's drive rests on a vertical rocking axle, located parallel to the shaft. Both pairs of spring and plate contacts are bracketed in two dielectric brackets which provide for a plane parallel disposition of the cited contacts. The operational time setting for the unit is a function of the initial angular position of the shaft, which is provided for by the attachment of a handle on its upper end.

Dynamics of Al/Fe{sub 2}O{sub 3} MIC combustion from short single-pulse photothermal initiation and time-resolved spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Stiegman, Albert E.; Park, Chi-Dong; Mileham, Melissa; Van de Burgt, Lambertus J. [Department of Chemistry and Biochemistry, Florida State University Tallahassee, FL (United States); Kramer, Michael P. [AFRL/MNME Eglin AFB, FL (United States)

2009-08-15

Time-resolved spectroscopy was used to study the dynamics of the photothermal ignition of Al/Fe{sub 2}O{sub 3} metastable intermolecular composites after single short-pulse laser initiation. The dynamics were recorded in several time domains from nanosecond to microsecond to quantify the dynamics from initial laser excitation to combustion. Time-averaged spectral data were also collected for the overall emission occurring during combustion. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Time evolution of the quark-gluon plasma

International Nuclear Information System (INIS)

Cooper, F.; New Hampshire Univ., Durham, NH

1993-01-01

We review progress in our understanding the production and time evolution of the quark gluon plasma starting with boost invariant initial conditions in a filed theory model based on the Schwinger mechanism of particle production via tunneling

Mechanisms of mechanical strain memory in airway smooth muscle.

Science.gov (United States)

Kim, Hak Rim; Hai, Chi-Ming

2005-10-01

We evaluated the hypothesis that mechanical deformation of airway smooth muscle induces structural remodeling of airway smooth muscle cells, thereby modulating mechanical performance in subsequent contractions. This hypothesis implied that past experience of mechanical deformation was retained (or "memorized") as structural changes in airway smooth muscle cells, which modulated the cell's subsequent contractile responses. We termed this phenomenon mechanical strain memory. Preshortening has been found to induce attenuation of both force and isotonic shortening velocity in cholinergic receptor-activated airway smooth muscle. Rapid stretching of cholinergic receptor-activated airway smooth muscle from an initial length to a final length resulted in post-stretch force and myosin light chain phosphorylation that correlated significantly with initial length. Thus post-stretch muscle strips appeared to retain memory of the initial length prior to rapid stretch (mechanical strain memory). Cytoskeletal recruitment of actin- and integrin-binding proteins and Erk 1/2 MAPK appeared to be important mechanisms of mechanical strain memory. Sinusoidal length oscillation led to force attenuation during oscillation and in subsequent contractions in intact airway smooth muscle, and p38 MAPK appeared to be an important mechanism. In contrast, application of local mechanical strain to cultured airway smooth muscle cells induced local actin polymerization and cytoskeletal stiffening. It is conceivable that deep inspiration-induced bronchoprotection may be a manifestation of mechanical strain memory such that mechanical deformation from past breathing cycles modulated the mechanical performance of airway smooth muscle in subsequent cycles in a continuous and dynamic manner.

Discretization of space and time in wave mechanics: the validity limit

OpenAIRE

Roatta , Luca

2017-01-01

Assuming that space and time can only have discrete values, it is shown that wave mechanics must necessarily have a specific applicability limit: in a discrete context, unlike in a continuous one, frequencies can not have arbitrarily high values.

Impact of OH Radical-Initiated H2CO3 Degradation in the Earth's Atmosphere via Proton-Coupled Electron Transfer Mechanism.

Science.gov (United States)

Ghoshal, Sourav; Hazra, Montu K

2016-02-04

The decomposition of isolated carbonic acid (H2CO3) molecule into CO2 and H2O (H2CO3 → CO2 + H2O) is prevented by a large activation barrier (>35 kcal/mol). Nevertheless, it is surprising that the detection of the H2CO3 molecule has not been possible yet, and the hunt for the free H2CO3 molecule has become challenging not only in the Earth's atmosphere but also on Mars. In view of this fact, we report here the high levels of quantum chemistry calculations investigating both the energetics and kinetics of the OH radical-initiated H2CO3 degradation reaction to interpret the loss of the H2CO3 molecule in the Earth's atmosphere. It is seen from our study that proton-coupled electron transfer (PCET) and hydrogen atom transfer (HAT) are the two mechanisms by which the OH radical initiates the degradation of the H2CO3 molecule. Moreover, the PCET mechanism is potentially the important one, as the effective barrier, defined as the difference between the zero point vibrational energy (ZPE) corrected energy of the transition state and the total energy of the isolated starting reactants in terms of bimolecular encounters, for the PCET mechanism at the CCSD(T)/6-311++G(3df,3pd) level of theory is ∼3 to 4 kcal/mol lower than the effective barrier height associated with the HAT mechanism. The CCSD(T)/6-311++G(3df,3pd) level predicted effective barrier heights for the degradations of the two most stable conformers of H2CO3 molecule via the PCET mechanism are only ∼2.7 and 4.3 kcal/mol. A comparative reaction rate analysis at the CCSD(T)/6-311++G(3df,3pd) level of theory has also been carried out to explore the potential impact of the OH radical-initiated H2CO3 degradation relative to that from water (H2O), formic acid (FA), acetic acid (AA) and sulfuric acid (SA) assisted H2CO3 → CO2 + H2O decomposition reactions in both the Earth's troposphere and stratosphere. The comparison of the reaction rates reveals that, although the atmospheric concentration of the OH radical is

Absolute estimation of initial concentrations of amplicon in a real-time RT-PCR process

Directory of Open Access Journals (Sweden)

Kohn Michael

2007-10-01

Full Text Available Abstract Background Since real time PCR was first developed, several approaches to estimating the initial quantity of template in an RT-PCR reaction have been tried. While initially only the early thermal cycles corresponding to exponential duplication were used, lately there has been an effort to use all of the cycles in a PCR. The efforts have included both fitting empirical sigmoid curves and more elaborate mechanistic models that explore the chemical reactions taking place during each cycle. The more elaborate mechanistic models require many more parameters than can be fit from a single amplification, while the empirical models provide little insight and are difficult to tailor to specific reactants. Results We directly estimate the initial amount of amplicon using a simplified mechanistic model based on chemical reactions in the annealing step of the PCR. The basic model includes the duplication of DNA with the digestion of Taqman probe and the re-annealing between previously synthesized DNA strands of opposite orientation. By modelling the amount of Taqman probe digested and matching that with the observed fluorescence, the conversion factor between the number of fluorescing dye molecules and observed fluorescent emission can be estimated, along with the absolute initial amount of amplicon and the rate parameter for re-annealing. The model is applied to several PCR reactions with known amounts of amplicon and is shown to work reasonably well. An expanded version of the model allows duplication of amplicon without release of fluorescent dye, by adding 1 more parameter to the model. The additional process is helpful in most cases where the initial primer concentration exceeds the initial probe concentration. Software for applying the algorithm to data may be downloaded at http://www.niehs.nih.gov/research/resources/software/pcranalyzer/ Conclusion We present proof of the principle that a mechanistically based model can be fit to observations

Reliability of video-based identification of footstrike pattern and video time frame at initial contact in recreational runners

DEFF Research Database (Denmark)

Damsted, Camma; Larsen, L H; Nielsen, R.O.

2015-01-01

and video time frame at initial contact during treadmill running using two-dimensional (2D) video recordings. METHODS: Thirty-one recreational runners were recorded twice, 1 week apart, with a high-speed video camera. Two blinded raters evaluated each video twice with an interval of at least 14 days....... RESULTS: Kappa values for within-day identification of footstrike pattern revealed intra-rater agreement of 0.83-0.88 and inter-rater agreement of 0.50-0.63. Corresponding figures for between-day identification of footstrike pattern were 0.63-0.69 and 0.41-0.53, respectively. Identification of video time...... in 36% of the identifications (kappa=0.41). The 95% limits of agreement for identification of video time frame at initial contact may, at times, allow for different identification of footstrike pattern. Clinicians should, therefore, be encouraged to continue using clinical 2D video setups for intra...

Mechanism and kinetic properties for the OH-initiated atmospheric oxidation degradation of 9,10-Dichlorophenanthrene.

Science.gov (United States)

Dang, Juan; Shi, Xiangli; Zhang, Qingzhu; Hu, Jingtian; Wang, Wenxing

2015-02-01

Chlorinated polycyclic aromatic hydrocarbons (ClPAHs) have become a serious environmental concern due to their widespread occurrence and dioxin-like toxicities. In this work, the mechanism of the OH-initiated atmospheric oxidation degradation of 9,10-dichlorophenanthrene (9,10-Cl₂Phe) was investigated by using high-accuracy quantum chemistry calculations. The rate constants of the crucial elementary reactions were determined by the Rice-Ramsperger-Kassel-Marcus (RRKM) theory. The theoretical results were compared with the available experimental data. The main oxidation products are a group of ring-retaining and ring-opening compounds including chlorophenanthrols, 9,10-dichlorophenanthrene-3,4-dione, dialdehydes, chlorophenanthrenequinones, nitro-9,10-Cl₂Phe and epoxides et al. The overall rate constant of the OH addition reaction is 2.35 × 10(-12)cm(3) molecule(-1)s(-1) at 298 K and 1 atm. The atmospheric lifetime of 9,10-Cl₂Phe determined by OH radicals is about 5.05 days. This study provides a comprehensive investigation of the OH-initiated oxidation degradation of 9,10-Cl₂Phe and should contribute to clarifying its atmospheric fate. Copyright © 2014 Elsevier B.V. All rights reserved.

OCA-P, PWR Vessel Probabilistic Fracture Mechanics

International Nuclear Information System (INIS)

Cheverton, R.D.; Ball, D.G.

2001-01-01

1 - Description of program or function: OCA-P is a probabilistic fracture-mechanics code prepared specifically for evaluating the integrity of pressurized-water reactor vessels subjected to overcooling-accident loading conditions. Based on linear-elastic fracture mechanics, it has two- and limited three-dimensional flaw capability, and can treat cladding as a discrete region. Both deterministic and probabilistic analyses can be performed. For deterministic analysis, it is possible to conduct a search for critical values of the fluence and the nil-ductility reference temperature corresponding to incipient initiation of the initial flaw. The probabilistic portion of OCA-P is based on Monte Carlo techniques, and simulated parameters include fluence, flaw depth, fracture toughness, nil-ductility reference temperature, and concentrations of copper, nickel, and phosphorous. Plotting capabilities include the construction of critical-crack-depth diagrams (deterministic analysis) and a variety of histograms (probabilistic analysis). 2 - Method of solution: OAC-P accepts as input the reactor primary- system pressure and the reactor pressure-vessel downcomer coolant temperature, as functions of time in the specified transient. Then, the wall temperatures and stresses are calculated as a function of time and radial position in the wall, and the fracture-mechanics analysis is performed to obtain the stress intensity factors as a function of crack depth and time in the transient. In a deterministic analysis, values of the static crack initiation toughness and the crack arrest toughness are also calculated for all crack depths and times in the transient. A comparison of these values permits an evaluation of flaw behavior. For a probabilistic analysis, OCA-P generates a large number of reactor pressure vessels, each with a different combination of the various values of the parameters involved in the analysis of flaw behavior. For each of these vessels, a deterministic fracture

Tunneling time distribution by means of Nelson's quantum mechanics and wave-particle duality

International Nuclear Information System (INIS)

Hara, Koh'ichiro; Ohba, Ichiro

2003-01-01

We calculate a tunneling time distribution by means of Nelson's quantum mechanics and investigate its statistical properties. The relationship between the average and deviation of tunneling time suggests the existence of 'wave-particle duality' in the tunneling phenomena

Quantum-mechanical treatment of an electron undergoing synchrotron radiation.

Science.gov (United States)

White, D.

1972-01-01

The problem of an electron moving perpendicular to an intense magnetic field is approached from the framework of quantum mechanics. A numerical solution to the related rate equations describing the probabilities of occupation of the electron's energy states is put forth along with the expected errors involved. The quantum-mechanical approach is found to predict a significant amount of energy broadening with time for an initially monoenergetic electron beam entering a region of an intense magnetic field as long as the product of initial energy and magnetic field is of order 50 MG BeV or larger.

Mathematical sense-making in quantum mechanics: An initial peek

Science.gov (United States)

Dreyfus, Benjamin W.; Elby, Andrew; Gupta, Ayush; Sohr, Erin Ronayne

2017-12-01

Mathematical sense-making—looking for coherence between the structure of the mathematical formalism and causal or functional relations in the world—is a core component of physics expertise. Some physics education research studies have explored what mathematical sense-making looks like at the introductory physics level, while some historians and "science studies" have explored how expert physicists engage in it. What is largely missing, with a few exceptions, is theoretical and empirical work at the intermediate level—upper division physics students—especially when they are learning difficult new mathematical formalism. In this paper, we present analysis of a segment of video-recorded discussion between two students grappling with a quantum mechanics question to illustrate what mathematical sense-making can look like in quantum mechanics. We claim that mathematical sense-making is possible and productive for learning and problem solving in quantum mechanics. Mathematical sense-making in quantum mechanics is continuous in many ways with mathematical sense-making in introductory physics. However, in the context of quantum mechanics, the connections between formalism, intuitive conceptual schema, and the physical world become more compound (nested) and indirect. We illustrate these similarities and differences in part by proposing a new symbolic form, eigenvector eigenvalue, which is composed of multiple primitive symbolic forms.

Reversibility and irreversibility from an initial value formulation

International Nuclear Information System (INIS)

Muriel, A.

2013-01-01

From a time evolution equation for the single particle distribution function derived from the N-particle distribution function (A. Muriel, M. Dresden, Physica D 101 (1997) 297), an exact solution for the 3D Navier–Stokes equation – an old problem – has been found (A. Muriel, Results Phys. 1 (2011) 2). In this Letter, a second exact conclusion from the above-mentioned work is presented. We analyze the time symmetry properties of a formal, exact solution for the single-particle distribution function contracted from the many-body Liouville equation. This analysis must be done because group theoretic results on time reversal symmetry of the full Liouville equation (E.C.G. Sudarshan, N. Mukunda, Classical Mechanics: A Modern Perspective, Wiley, 1974). no longer applies automatically to the single particle distribution function contracted from the formal solution of the N-body Liouville equation. We find the following result: if the initial momentum distribution is even in the momentum, the single particle distribution is reversible. If there is any asymmetry in the initial momentum distribution, no matter how small, the system is irreversible.

An objective interpretation of Lagrangian quantum mechanics

International Nuclear Information System (INIS)

Roberts, K.V.

1978-01-01

Unlike classical mechanics, the Copenhagen interpretation of quantum mechanics does not provide an objective space-time picture of the actual history of a physical system. This paper suggests how the conceptual foundations of quantum mechanics can be reformulated, without changing the mathematical content of the theory or its detailed agreement with experiment and without introducing any hidden variables, in order to provide an objective, covariant, Lagrangian description of reality which is deterministic and time-symmetric on the microscopic scale. The basis of this description can be expressed either as an action functional or as a summation over Feynman diagrams or paths. The probability laws associated with the quantum-mechanical measurement process, and the asymmetry in time of the principles of macroscopic causality and of the laws of statistical mechanics, are interpreted as consequences of the particular boundary conditions that apply to the actual universe. The objective interpretation does not include the observer and the measurement process among the fundamental concepts of the theory, but it does not entail a revision of the ideas of determinism and of time, since in a Lagrangian theory both initial and final boundary conditions on the action functional are required. (author)

Time Interval to Initiation of Contraceptive Methods Following ...

African Journals Online (AJOL)

2018-01-30

Jan 30, 2018 ... interval between a woman's last childbirth and the initiation of contraception. Materials and ..... DF=Degree of freedom; χ2=Chi‑square test ..... practice of modern contraception among single women in a rural and urban ...

OpenGeoSys: An open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media

DEFF Research Database (Denmark)

Kolditz, O.; Bauer, S.; Bilke, L.

In this paper we describe the OpenGeoSys (OGS) project, which is a scientific open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical processes in porous media. The basic concept is to provide a flexible numerical framework (using primarily the Finite Element Method (FEM...

Pretreatment costs of care and time to initial treatment for patients with cancer of unknown primary.

Science.gov (United States)

Walker, Mark S; Weinstein, Laura; Luo, Roger; Marino, Ingrid

2018-06-01

Time to treatment and pretreatment costs may be affected by unknown primary tumor site. This retrospective study used electronic medical record data from patients in ten US community oncology practices. Eligible patients were ≥18 years, diagnosed with cancer of unknown primary (CUP) or known metastatic solid tumor, and presented between 1 January 2012 and 30 June 2014. Patients with CUP (n = 294) had a longer interval than non-CUP patients (n = 92) from presentation to treatment initiation (1.18 vs 0.49 months, p < 0.0001), and had higher pretreatment costs (US$27,882 vs US$20,449, p = 0.0075). When analyzed as monthly cost, the difference between groups in log-cost per month was nonsignificant. Higher pretreatment costs in CUP patients appeared attributable to significantly longer time to initiation of therapy.

Time expenditure in computer aided time studies implemented for highly mechanized forest equipment

Directory of Open Access Journals (Sweden)

Elena Camelia Mușat

2016-06-01

different results, a fact that should trigger other studies based on variations of these parameters. However, the results of this study give an initial overview on the time resources needed in processing and analyzing the data, and may help researchers in allocating their resources.

Initial value gravitational quadrupole radiation theorem

International Nuclear Information System (INIS)

Winicour, J.

1987-01-01

A rigorous version of the quadrupole radiation formula is derived using the characteristic initial value formulation of a general relativistic fluid space-time. Starting from initial data for a Newtonian fluid, an algorithm is presented that determines characteristic initial data for a one-parameter family of general relativistic fluid space-times. At the initial time, a one-parameter family of space-times with this initial data osculates the evolution of the Newtonian fluid and has leading order news function equal to the third time derivative of the transverse Newtonian quadrupole moment

Timely initiation of breastfeeding and associated factors among mothers in Motta town, East Gojjam zone, Amhara regional state, Ethiopia, 2015: a cross-sectional study.

Science.gov (United States)

Tewabe, Tilahun

2016-10-19

Timely initiation of breastfeeding within one hour after birth and exclusive breastfeeding is recommended for the first six months of infant life along with continuation of breastfeeding up to two years. Timely initiation of breastfeeding has the potential to prevent 22 % of neonatal deaths. The objective of this study was to assess timely initiation of breastfeeding and associated factors among mothers who have infants less than six months of age in Motta town, East Gojjam, Amhara Regional State, Ethiopia. Community based quantitative cross-sectional study was conducted from April 7, 2015 to May 7, 2015. Simple random sampling technique was applied after taking all registered mothers who have infants less than 6 months old from local health extension workers of each kebele. A total of 423 mothers with infant less than six month old were included in this study. The data was collected from all four Kebeles using interviewer administered questionnaire. Descriptive and inferential statistics were used to present the data. Both bivariate and multivariate logistic regression analyses were used to identify factors associated with timely initiation breastfeeding. Prevalence of timely initiation of breastfeeding was78.8 % [95 % CL: 74.88 %, 82.72 %]. Mothers who gave birth to their infant in a health institution [AOR = 3.486(1.253, 9.700)], birthed vaginally [AOR = 5.722(3.134, 11.246)] and didn't give prelacteal food [AOR = 4.627(2.095, 10.220)] were more likely to initiate breastfeeding early than their counterparts. Prevalence of timely initiation of breastfeeding in the study area was 78.8 %. Place of delivery, mode of delivery and prelactal feeding were the independent predictors of timely initiation of breastfeeding. Recommendations to increase timely initiation of breastfeeding were: encouraging mothers to deliver their child in a health institution, minimizing caesarean delivery as much as possible and educating mothers and community as a whole

An energy saving mechanism of EPON networks for real time video transmission

Science.gov (United States)

Liu, Chien-Ping; Wu, Ho-Ting; Chiang, Yun-Ting; Chien, Shieh-Chieh; Ke, Kai-Wei

2015-07-01

Modern access networks are constructed widely by passive optical networks (PONs) to meet the growing bandwidth demand. However, higher bandwidth means more energy consumption. To save energy, a few research works propose the dual-mode energy saving mechanism that allows the ONU to operate between active and sleep modes periodically. However, such dual-mode energy saving design may induce unnecessary power consumption or packet delay increase in the case where only downstream data exist for most of the time. In this paper, we propose a new tri-mode energy saving scheme for Ethernet PON (EPON). The new tri-mode energy saving design, combining the dual-mode saving mechanism with the doze mode, allows the ONU to switch among these three modes alternatively. In the doze mode, the ONU may receive downstream data while keeping its transmitter close. Such scenario is often observed for real time video downstream transmission. Furthermore, the low packet delay of high priority upstream data can be attained through the use of early wake-up mechanism employed in both energy saving modes. The energy saving and system efficiency can thus be achieved jointly while maintaining the differentiated QoS for data with various priorities. Performance results via simulation have demonstrated the effectiveness of such mechanism.

Evaluation of different fracture-mechanical J-integral initiation values with regard to their usability in the safety assessment of components

International Nuclear Information System (INIS)

Eisele, U.; Roos, E.

1991-01-01

Determining fracture-mechanical material characteristic values on the basis of the J-integral is described and stipulated in a variety of standards and guidelines. The individual specifications differ in terms of procedure when determining the characteristic values and, therefore, also in terms of the meaningfulness of the results. This paper presents the different procedures, suggested in the course of the development of test methods in the field of elastic-plastic fracture mechanics, used to characterize crack initiation behaviour with regard to their features as material characteristic values and their usability in the safety assessment of components. (orig.)

Divergent series and memory of the initial condition in the long-time solution of some anomalous diffusion problems.

Science.gov (United States)

Yuste, S Bravo; Borrego, R; Abad, E

2010-02-01

We consider various anomalous d -dimensional diffusion problems in the presence of an absorbing boundary with radial symmetry. The motion of particles is described by a fractional diffusion equation. Their mean-square displacement is given by r(2) proportional, variant t(gamma)(0divergent series appear when the concentration or survival probabilities are evaluated via the method of separation of variables. While the solution for normal diffusion problems is, at most, divergent as t-->0 , the emergence of such series in the long-time domain is a specific feature of subdiffusion problems. We present a method to regularize such series, and, in some cases, validate the procedure by using alternative techniques (Laplace transform method and numerical simulations). In the normal diffusion case, we find that the signature of the initial condition on the approach to the steady state rapidly fades away and the solution approaches a single (the main) decay mode in the long-time regime. In remarkable contrast, long-time memory of the initial condition is present in the subdiffusive case as the spatial part Psi1(r) describing the long-time decay of the solution to the steady state is determined by a weighted superposition of all spatial modes characteristic of the normal diffusion problem, the weight being dependent on the initial condition. Interestingly, Psi1(r) turns out to be independent of the anomalous diffusion exponent gamma .

Divergent regeneration-competent cells adopt a common mechanism for callus initiation in angiosperms.

Science.gov (United States)

Hu, Bo; Zhang, Guifang; Liu, Wu; Shi, Jianmin; Wang, Hua; Qi, Meifang; Li, Jiqin; Qin, Peng; Ruan, Ying; Huang, Hai; Zhang, Yijing; Xu, Lin

2017-06-01

In tissue culture, the formation of callus from detached explants is a key step in plant regeneration; however, the regenerative abilities in different species are variable. While nearly all parts of organs of the dicot Arabidopsis thaliana are ready for callus formation, mature regions of organs in monocot rice ( Oryza sativa ) and other cereals are extremely unresponsive to tissue culture. Whether there is a common molecular mechanism beyond these different regenerative phenomena is unclear. Here we show that the Arabidopsis and rice use different regeneration-competent cells to initiate callus, whereas the cells all adopt WUSCHEL-RELATED HOMEOBOX 11 ( WOX11 ) and WOX5 during cell fate transition. Different from Arabidopsis which maintains regeneration-competent cells in mature organs, rice exhausts those cells during organ maturation, resulting in regenerative inability in mature organs. Our study not only explains this old perplexity in agricultural biotechnology, but also provides common molecular markers for tissue culture of different angiosperm species.

Time dependency of the prediction skill for the North Atlantic subpolar gyre in initialized decadal hindcasts with MPI-ESM

Science.gov (United States)

Brune, Sebastian; Düsterhus, Andre; Pohlmann, Holger; Müller, Wolfgang; Baehr, Johanna

2017-04-01

We analyze the time dependency of decadal hindcast skill in the North Atlantic subpolar gyre within the time period 1961-2013. We compare anomaly correlation coefficients and interquartile ranges of total upper ocean heat content and sea surface temperature for three differently initialized sets of hindcast simulations with the global coupled model MPI-ESM. All initializations use weakly coupled assimilation with the same full-field nudging in the atmospheric component and different assimilation techniques for oceanic temperature and salinity: (1) ensemble Kalman filter assimilating EN4 and HadISST observations, (2) nudging of anomalies to ORAS4 reanalysis, (3) nudging of full values to ORAS4 reanalysis. We find that hindcast skill depends strongly on the evaluation time period, with higher hindcast skill during strong multiyear trends and lower hindcast skill in the absence of such trends. While there may only be small differences between the prediction systems in the analysis focusing on the entire hindcast period, these differences between the hindcast systems are much more pronounced when investigating any 20-year subperiod within the entire hindcast period. For the ensemble Kalman filter high skill in the assimilation experiment is generally linked to high skill in the initialized hindcasts. Such direct link does not seem to exist in the hindcasts initialized by either nudged system. In the ensemble Kalman filter initialized hindcasts, we find significant hindcast skill for up to 5 to 8 lead years, except for the 1970s. In the nudged system initialized hindcasts, hindcast skill is consistently diminished in lead years 2 and 3 with lowest skill in the 1970s as well. Overall, we find that a model-consistent assimilation technique can improve hindcast skill. Further, the evaluation of 20 year subperiods within the full hindcast period provides essential insights to judge the success of both the assimilation and the subsequent hindcast skill.

Study of initiation and growth of stress corrosion cracks. Quantitative characterization and modeling

International Nuclear Information System (INIS)

Peyrat, Christine

1997-01-01

A phenomenological study of Stress Corrosion Cracking (SCC) cracks initiation and growth was carried out on a Z 2 CN 18.10 stainless steel in a boiling aqueous magnesium chloride solution at 153 deg. C. The characterization method exploits the morphological information (cracks shape and size distribution) available on a specimen after SCC test. This method, independent of any mechanistic hypothesis, led to the analytical representation of the growth rate of a given crack as a function of its depth and of the density of deeper cracks. The presence of this last parameter could be the expression of a 'shielding effect' of mechanical origin, exerted by the cracks of large size. A 'true initiation' rate was calculated by an extrapolation based on the analytical expression of the growth rate. This analytical representation of cracks initiation and growth accounts for the saturation observed in the experimental determination of the 'apparent initiation'. As time goes, the number of cracks deeper than a given threshold depth tends towards a limit which depends very strongly on the chosen threshold. This saturation effect can be interpreted as exclusively due to the way the small cracks propagate, as the 'true initiation' rate can be expressed versus time by a simple power law. In the case of slow strain rate tests, it is shown that the kinetic parameters characteristic of initiation and growth depend on the applied elongation rate. In particular, the initial crack growth rate increases with elongation rate. The validity domains of the proposed expressions have been specified by means of SCC tests carried out under different types of mechanical loading. (author) [fr

The effect of complete integration of HIV and TB services on time to initiation of antiretroviral therapy: a before-after study.

Directory of Open Access Journals (Sweden)

Bernhard Kerschberger

Full Text Available Studies have shown that early ART initiation in TB/HIV co-infected patients lowers mortality. One way to implement earlier ART commencement could be through integration of TB and HIV services, a more efficient model of care than separate, vertical programs. We present a model of full TB/HIV integration and estimate its effect on time to initiation of ART.We retrospectively reviewed TB registers and clinical notes of 209 TB/HIV co-infected adults with a CD4 count <250 cells/µl and registered for TB treatment at one primary care clinic in a South African township between June 2008 and May 2009. Using Kaplan-Meier and Cox proportional hazard analysis, we compared time between initiation of TB treatment and ART for the periods before and after full, "one-stop shop" integration of TB and HIV services (in December 2009. Potential confounders were determined a priori through directed acyclic graphs. Robustness of assumptions was investigated by sensitivity analyses. The analysis included 188 patients (100 pre- and 88 post-integration, yielding 56 person-years of observation. Baseline characteristics of the two groups were similar. Median time to ART initiation decreased from 147 days (95% confidence interval [CI] 85-188 before integration of services to 75 days (95% CI 52-119 post-integration. In adjusted analyses, patients attending the clinic post-integration were 1.60 times (95% CI 1.11-2.29 more likely to have started ART relative to the pre-integration period. Sensitivity analyses supported these findings.Full TB/HIV care integration is feasible and led to a 60% increased chance of co-infected patients starting ART, while reducing time to ART initiation by an average of 72 days. Although these estimates should be confirmed through larger studies, they suggest that scale-up of full TB/HIV service integration in high TB/HIV prevalence settings may shorten time to ART initiation, which might reduce excess mortality and morbidity.

Gradient plasticity for thermo-mechanical processes in metals with length and time scales

Science.gov (United States)

Voyiadjis, George Z.; Faghihi, Danial

2013-03-01

A thermodynamically consistent framework is developed in order to characterize the mechanical and thermal behavior of metals in small volume and on the fast transient time. In this regard, an enhanced gradient plasticity theory is coupled with the application of a micromorphic approach to the temperature variable. A physically based yield function based on the concept of thermal activation energy and the dislocation interaction mechanisms including nonlinear hardening is taken into consideration in the derivation. The effect of the material microstructural interface between two materials is also incorporated in the formulation with both temperature and rate effects. In order to accurately address the strengthening and hardening mechanisms, the theory is developed based on the decomposition of the mechanical state variables into energetic and dissipative counterparts which endowed the constitutive equations to have both energetic and dissipative gradient length scales for the bulk material and the interface. Moreover, the microstructural interaction effect in the fast transient process is addressed by incorporating two time scales into the microscopic heat equation. The numerical example of thin film on elastic substrate or a single phase bicrystal under uniform tension is addressed here. The effects of individual counterparts of the framework on the thermal and mechanical responses are investigated. The model is also compared with experimental results.

Timing of initial arrival at the breeding site predicts age at first reproduction in a long-lived migratory bird

Science.gov (United States)

Becker, Peter H.; Dittmann, Tobias; Ludwigs, Jan-Dieter; Limmer, Bente; Ludwig, Sonja C.; Bauch, Christina; Braasch, Alexander; Wendeln, Helmut

2008-01-01

In long-lived vertebrates, individuals generally visit potential breeding areas or populations during one or more seasons before reproducing for the first time. During these years of prospecting, they select a future breeding site, colony, or mate and improve various skills and their physical condition to meet the requirements of reproduction. One precondition of successful reproduction is arrival in time on the breeding grounds. Here, we study the intricate links among the date of initial spring arrival, body mass, sex, and the age of first breeding in the common tern Sterna hirundo, a long-lived migratory colonial seabird. The study is based on a unique, individual-based, long-term dataset of sexed birds, marked with transponders, which allow recording their individual arrival, overall attendance, and clutch initiation remotely and automatically year by year over the entire lifetime at the natal colony site. We show that the seasonal date of initial arrival at the breeding grounds predicts the individual age at first reproduction, which mostly occurs years later. Late first-time arrivals remain delayed birds throughout subsequent years. Our findings reveal that timing of arrival at the site of reproduction and timing of reproduction itself are coherent parameters of individual quality, which are linked with the prospects of the breeding career and may have consequences for fitness. PMID:18711134

Age of initiation, psychopathology, and other substance use are associated with time to use disorder diagnosis in persons using opioids nonmedically.

Science.gov (United States)

Schepis, Ty S; Hakes, Jahn K

2017-01-01

Nonmedical use of prescription opioids (NMUPO) is an ongoing public health challenge, as NMUPO is associated with psychopathology, other drug use, and fatal overdose. These concomitant risks are greatest in those with opioid use disorder (OUD), but the development of NMUPO-related use disorder is poorly understood. The primary aim of this study was to establish factors associated with the development of and time to OUD among persons engaged in NMUPO. Data were from wave 1 of the National Epidemiologic Study on Alcohol and Related Conditions, with 1755 participants endorsing lifetime NMUPO. Analyses used sequential design-based logistic regression for DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) opioid dependence correlates, followed by Cox regression of proportional hazards for correlates (e.g., sociodemographics, age of NMUPO initiation, and psychopathology) of time to dependence in those who developed DSM-IV dependence. Earlier age of NMUPO initiation increased OUD odds (adjusted odds ratio [AOR] = 0.95, 95% confidence interval [CI] = 0.94-0.96) but slowed OUD development (adjusted hazard ratio [AHR] = 1.05, 95% CI = 1.04-1.06) in those who developed OUD (n = 118), after controlling for sociodemographics, psychopathology, and ages of other drug use initiation. Psychopathology and earlier other drug use initiation were associated with higher OUD odds, but only having an alcohol use disorder was associated with shorter time to OUD. Earlier NMUPO initiation is associated with increased odds of OUD, although those with early initiation had a slower progression to OUD. Programs that prevent early NMUPO initiation, which might lower rates of OUD, and/or identify the later initiators at highest risk for rapid OUD development could have great public health benefits.

Biological mechanisms, one molecule at a time

Science.gov (United States)

Tinoco, Ignacio; Gonzalez, Ruben L.

2011-01-01

The last 15 years have witnessed the development of tools that allow the observation and manipulation of single molecules. The rapidly expanding application of these technologies for investigating biological systems of ever-increasing complexity is revolutionizing our ability to probe the mechanisms of biological reactions. Here, we compare the mechanistic information available from single-molecule experiments with the information typically obtained from ensemble studies and show how these two experimental approaches interface with each other. We next present a basic overview of the toolkit for observing and manipulating biology one molecule at a time. We close by presenting a case study demonstrating the impact that single-molecule approaches have had on our understanding of one of life's most fundamental biochemical reactions: the translation of a messenger RNA into its encoded protein by the ribosome. PMID:21685361

Time dependency in the mechanical properties of crystalline rocks. A literature survey

International Nuclear Information System (INIS)

Hagros, A.; Johansson, E.; Hudson, J.A.

2008-09-01

Because of the long design life, elevated temperatures, and the location at depth (high stresses), time-dependent aspects of the mechanical properties of crystalline rock are potentially important for the design and the long term safety of the radioactive waste repository at Olkiluoto. However, time-dependent effects in rock mechanics are still one of the least understood aspects of the physical behaviour of rock masses, this being partly due to the fact that it is difficult to conduct long-term experimental tests - either in the laboratory or in situ. Yet, the time-dependent mechanical behaviour needs to be characterised so that it can be included in the modelling studies supporting repository design. The Introduction explains the background to the literature survey and includes definitions of the terms 'creep' (increasing strain at constant stress) and 'stress relaxation' (decreasing stress at constant strain). Moreover, it is noted that the rock around an in situ excavation is loaded by the adjacent rock elements and so the timedependent behaviour will depend on the unloading stiffness of these and hence will not actually be either pure creep or pure stress relaxation. The Appendix contains the results of the literature survey of reported time-dependent research as it applies to crystalline rock. A summary of each of the 38 literature items is presented in tabular form covering document number, subject area, document reference, subject matter, objectives, methodology, highlighted figures, conclusions and comments. It is concluded that the time-dependent failure strength of all rocks observed may be interpreted by sub-critical crack growth assisted by the stress corrosion mechanism. Also, certain parameters are known to affect the long-term properties: mineralogy, grain size, water/water chemistry, confining stress and loading history. At some point in the loading history of rock, the state of crack development reaches a point whereby the continued generation of

Non‐Canonical Replication Initiation: You’re Fired!

Directory of Open Access Journals (Sweden)

Bazilė Ravoitytė

2017-01-01

Full Text Available The division of prokaryotic and eukaryotic cells produces two cells that inherit a perfect copy of the genetic material originally derived from the mother cell. The initiation of canonical DNA replication must be coordinated to the cell cycle to ensure the accuracy of genome duplication. Controlled replication initiation depends on a complex interplay of cis‐acting DNA sequences, the so‐called origins of replication (ori, with trans‐acting factors involved in the onset of DNA synthesis. The interplay of cis‐acting elements and trans‐acting factors ensures that cells initiate replication at sequence‐specific sites only once, and in a timely order, to avoid chromosomal endoreplication. However, chromosome breakage and excessive RNA:DNA hybrid formation can cause breakinduced (BIR or transcription‐initiated replication (TIR, respectively. These non‐canonical replication events are expected to affect eukaryotic genome function and maintenance, and could be important for genome evolution and disease development. In this review, we describe the difference between canonical and non‐canonical DNA replication, and focus on mechanistic differences and common features between BIR and TIR. Finally, we discuss open issues on the factors and molecular mechanisms involved in TIR.

Knowledge Translation Interventions to Improve the Timing of Dialysis Initiation: Protocol for a Cluster Randomized Trial.

Science.gov (United States)

Chau, Elaine M T; Manns, Braden J; Garg, Amit X; Sood, Manish M; Kim, S Joseph; Naimark, David; Nesrallah, Gihad E; Soroka, Steven D; Beaulieu, Monica; Dixon, Stephanie; Alam, Ahsan; Tangri, Navdeep

2016-01-01

Early initiation of chronic dialysis (starting dialysis with higher vs lower kidney function) has risen rapidly in the past 2 decades in Canada and internationally, despite absence of established health benefits and higher costs. In 2014, a Canadian guideline on the timing of dialysis initiation, recommending an intent-to-defer approach, was published. The objective of this study is to evaluate the efficacy and safety of a knowledge translation intervention to promote the intent-to-defer approach in clinical practice. This study is a multicenter, 2-arm parallel, cluster randomized trial. The study involves 55 advanced chronic kidney disease clinics across Canada. Patients older than 18 years who are managed by nephrologists for more than 3 months, and initiate dialysis in the follow-up period are included in the study. Outcomes will be measured at the patient-level and enumerated within a cluster. Data on characteristics of each dialysis start will be determined by linkages with the Canadian Organ Replacement Register. Primary outcomes include the proportion of patients who start dialysis early with an estimated glomerular filtration rate greater than 10.5 mL/min/1.73 m 2 and start dialysis in hospital as inpatients or in an emergency room setting. Secondary outcomes include the rate of change in early dialysis starts; rates of hospitalizations, deaths, and cost of predialysis care (wherever available); quarterly proportion of new starts; and acceptability of the knowledge translation materials. We randomized 55 multidisciplinary chronic disease clinics (clusters) in Canada to receive either an active knowledge translation intervention or no intervention for the uptake of the guideline on the timing of dialysis initiation. The active knowledge translation intervention consists of audit and feedback as well as patient- and provider-directed educational tools delivered at a comprehensive in-person medical detailing visit. Control clinics are only exposed to guideline

Time in Quantum Mechanics

International Nuclear Information System (INIS)

Reznik, B.

1999-01-01

Time plays an unusual role in quantum theory, and the measurement of time is very different from the measurement of other physical qualities associated with a particle. As an example, the measurability of when something occurred is conceptually fraught with difficulties within the theory. Time must be measured by clocks, and one must somehow cause the occurrence of the event of interest to interact with a clock to record when that event occurred. But that interaction carries with it an inevitable perturbation of the event itself. I will argue that in addition to the usual ΔtΔE > ℎ associated with the accuracy of any clock, there is an additional ΔtE > ℎ uncertainty in the measurement of the time of arrival of a particle. Furthermore this constraint arises because the timing device can itself prevent the event from ever occurring at all. I will compare time measurements involving physical clocks, with attempts to construct a time operator and describe new difficulties associated with the latter approach

Time Interval to Initiation of Contraceptive Methods Following ...

African Journals Online (AJOL)

Objectives: The objectives of the study were to determine factors affecting the interval between a woman's last childbirth and the initiation of contraception. Materials and Methods: This was a retrospective study. Family planning clinic records of the Barau Dikko Teaching Hospital Kaduna from January 2000 to March 2014 ...

Spacetime alternatives in the quantum mechanics of a relativistic particle

International Nuclear Information System (INIS)

Whelan, J.T.

1994-01-01

Hartle's generalized quantum mechanics formalism is used to examine spacetime coarse grainings, i.e., sets of alternatives defined with respect to a region extended in time as well as space, in the quantum mechanics of a free relativistic particle. For a simple coarse graining and suitable initial conditions, tractable formulas are found for branch wave functions. Despite the nonlocality of the positive-definite version of the Klein-Gordon inner product, which means that nonoverlapping branches are not sufficient to imply decoherence, some initial conditions are found to give decoherence and allow the consistent assignment of probabilities

Coherent exciton transport in dendrimers and continuous-time quantum walks

Science.gov (United States)

Mülken, Oliver; Bierbaum, Veronika; Blumen, Alexander

2006-03-01

We model coherent exciton transport in dendrimers by continuous-time quantum walks. For dendrimers up to the second generation the coherent transport shows perfect recurrences when the initial excitation starts at the central node. For larger dendrimers, the recurrence ceases to be perfect, a fact which resembles results for discrete quantum carpets. Moreover, depending on the initial excitation site, we find that the coherent transport to certain nodes of the dendrimer has a very low probability. When the initial excitation starts from the central node, the problem can be mapped onto a line which simplifies the computational effort. Furthermore, the long time average of the quantum mechanical transition probabilities between pairs of nodes shows characteristic patterns and allows us to classify the nodes into clusters with identical limiting probabilities. For the (space) average of the quantum mechanical probability to be still or to be again at the initial site, we obtain, based on the Cauchy-Schwarz inequality, a simple lower bound which depends only on the eigenvalue spectrum of the Hamiltonian.

New mechanism under International Flood Initiative toward robustness for flood management in the Asia Pacific region

Science.gov (United States)

Murase, M.; Yoshitani, J.; Takeuchi, K.; Koike, T.

2015-12-01

Climate change is likely to result in increases in the frequency or intensity of extreme weather events. It is imperative that a good understanding is developed of how climate change affects the events that are reflected in hydrological extremes such as floods and how practitioners in water resources management deal with them. Since there is still major uncertainty as to how the impact of climate change affect actual water resources management, it is important to build robustness into management schemes and communities. Flood management under such variety of uncertainty favors the flexible and adaptive implementation both in top-down and bottom-up approaches. The former uses projections of global or spatially downscaled models to drive resource models and project resource impacts. The latter utilizes policy or planning tools to identify what changes in climate would be most threatening to their long-range operations. Especially for the bottom-up approaches, it is essential to identify the gap between what should be done and what has not been achieved for disaster risks. Indicators or index are appropriate tools to measure such gaps, but they are still in progress to cover the whole world. The International Flood Initiative (IFI), initiated in January 2005 by UNESCO and WMO in close cooperation with UNU and ISDR, IAHS and IAHR, has promoted an integrated approach to flood management to take advantage of floods and use of flood plains while reducing the social, environmental and economic risks. Its secretariat is located in ICHARM. The initiative objective is to support national platforms to practice evidence-based disaster risk reduction through mobilizing scientific and research networks at national, regional and international levels. The initiative is now preparing for a new mechanism to facilitate the integrated approach for flood management on the ground regionally in the Asia Pacific (IFI-AP) through monitoring, assessment and capacity building.

Time in Science: Reversibility vs. Irreversibility

Science.gov (United States)

Pomeau, Yves

To discuss properly the question of irreversibility one needs to make a careful distinction between reversibility of the equations of motion and the choice of the initial conditions. This is also relevant for the rather confuse philosophy of the wave packet reduction in quantum mechanics. The explanation of this reduction requires also to make precise assumptions on what initial data are accessible in our world. Finally I discuss how a given (and long) time record can be shown in an objective way to record an irreversible or reversible process. Or: can a direction of time be derived from its analysis? This leads quite naturally to examine if there is a possible spontaneous breaking of the time reversal symmetry in many body systems, a symmetry breaking that would be put in evidence objectively by looking at certain specific time correlations.

Linearized semiclassical initial value time correlation functions with maximum entropy analytic continuation.

Science.gov (United States)

Liu, Jian; Miller, William H

2008-09-28

The maximum entropy analytic continuation (MEAC) method is used to extend the range of accuracy of the linearized semiclassical initial value representation (LSC-IVR)/classical Wigner approximation for real time correlation functions. LSC-IVR provides a very effective "prior" for the MEAC procedure since it is very good for short times, exact for all time and temperature for harmonic potentials (even for correlation functions of nonlinear operators), and becomes exact in the classical high temperature limit. This combined MEAC+LSC/IVR approach is applied here to two highly nonlinear dynamical systems, a pure quartic potential in one dimensional and liquid para-hydrogen at two thermal state points (25 and 14 K under nearly zero external pressure). The former example shows the MEAC procedure to be a very significant enhancement of the LSC-IVR for correlation functions of both linear and nonlinear operators, and especially at low temperature where semiclassical approximations are least accurate. For liquid para-hydrogen, the LSC-IVR is seen already to be excellent at T=25 K, but the MEAC procedure produces a significant correction at the lower temperature (T=14 K). Comparisons are also made as to how the MEAC procedure is able to provide corrections for other trajectory-based dynamical approximations when used as priors.

Socio-economic status and time trends associated with early ART initiation following primary HIV infection in Montreal, Canada: 1996 to 2015.

Science.gov (United States)

Mehraj, Vikram; Cox, Joseph; Lebouché, Bertrand; Costiniuk, Cecilia; Cao, Wei; Li, Taisheng; Ponte, Rosalie; Thomas, Réjean; Szabo, Jason; Baril, Jean-Guy; Trottier, Benoit; Côté, Pierre; LeBlanc, Roger; Bruneau, Julie; Tremblay, Cécile; Routy, Jean-Pierre

2018-02-01

Guidelines regarding antiretroviral therapy (ART) initiation in HIV infection have varied over time, with the 2015 World Health Organization recommendation suggesting ART initiation at the time of diagnosis regardless of CD4 T-cell counts. Herein, we investigated the influence of socio-demographic and clinical factors in addition to time trends on early ART initiation among participants of the Montreal Primary HIV Infection Study. The Montreal Primary HIV Infection Study is a prospective cohort established in three community medical centres (CMCs) and two university medical centres (UMCs). Recently diagnosed HIV-infected adults were categorized as receiving early (vs. delayed) ART if ART was initiated within 180 days of the baseline visit. Associations between early ART initiation and socio-demographic, socio-economic and behavioural information were examined. Independent associations of factors linked with early ART initiation were determined using multivariable binary logistic regression analysis. A total of 348 participants had a documented date of HIV acquisition of age of participants was 35 (28; 42) years and the majority were male (96%), having paid employment (63%), men who have sex with men (MSM) (78%) and one to four sexual partners in the last three months (70%). Participants presented with a median IQR HIV plasma viral load of 4.6 (3.7; 5.3) log 10 copies/ml, CD4 count of 510 (387; 660) cells/μl and were recruited in CMCs (52%) or UMCs (48%). Early ART initiation was observed in 47% of the participants and the trend followed a V-shaped curve with peaks in 1996 to 1997 (89%) and 2013 to 2015 (88%) with a dip in 2007 to 2009 (22%). Multivariable analyses showed that having a paid employment adjusted odds ratio (aOR: 2.43; 95% CI: 1.19, 4.95), lower CD4 count (aOR per 50 cell increase: 0.93; 95% CI: 0.87, 0.99) and care at UMCs (aOR: 2.03; 95% CI: 1.06 to 3.90) were independently associated with early ART initiation. Early ART initiation during primary

Noether symmetries and integrability in time-dependent Hamiltonian mechanics

Directory of Open Access Journals (Sweden)

Jovanović Božidar

2016-01-01

Full Text Available We consider Noether symmetries within Hamiltonian setting as transformations that preserve Poincaré-Cartan form, i.e., as symmetries of characteristic line bundles of nondegenerate 1-forms. In the case when the Poincaré-Cartan form is contact, the explicit expression for the symmetries in the inverse Noether theorem is given. As examples, we consider natural mechanical systems, in particular the Kepler problem. Finally, we prove a variant of the theorem on complete (non-commutative integrability in terms of Noether symmetries of time-dependent Hamiltonian systems.

Corrective response times in a coordinated eye-head-arm countermanding task.

Science.gov (United States)

Tao, Gordon; Khan, Aarlenne Z; Blohm, Gunnar

2018-06-01

Inhibition of motor responses has been described as a race between two competing decision processes of motor initiation and inhibition, which manifest as the reaction time (RT) and the stop signal reaction time (SSRT); in the case where motor initiation wins out over inhibition, an erroneous movement occurs that usually needs to be corrected, leading to corrective response times (CRTs). Here we used a combined eye-head-arm movement countermanding task to investigate the mechanisms governing multiple effector coordination and the timing of corrective responses. We found a high degree of correlation between effector response times for RT, SSRT, and CRT, suggesting that decision processes are strongly dependent across effectors. To gain further insight into the mechanisms underlying CRTs, we tested multiple models to describe the distribution of RTs, SSRTs, and CRTs. The best-ranked model (according to 3 information criteria) extends the LATER race model governing RTs and SSRTs, whereby a second motor initiation process triggers the corrective response (CRT) only after the inhibition process completes in an expedited fashion. Our model suggests that the neural processing underpinning a failed decision has a residual effect on subsequent actions. NEW & NOTEWORTHY Failure to inhibit erroneous movements typically results in corrective movements. For coordinated eye-head-hand movements we show that corrective movements are only initiated after the erroneous movement cancellation signal has reached a decision threshold in an accelerated fashion.

Factors influencing timely initiation and completion of gestational diabetes mellitus screening and diagnosis - a qualitative study from Tamil Nadu, India.

Science.gov (United States)

Nielsen, Karoline Kragelund; Rheinländer, Thilde; Kapur, Anil; Damm, Peter; Seshiah, Veerasamy; Bygbjerg, Ib C

2017-08-01

In 2007, universal screening for gestational diabetes mellitus (GDM) was introduced in Tamil Nadu, India. To identify factors hindering or facilitating timely initiation and completion of the GDM screening and diagnosis process, our study investigated how pregnant women in rural and urban Tamil Nadu access and navigate different GDM related health services. The study was carried out in two settings: an urban private diabetes centre and a rural government primary health centre. Observations of the process of screening and diagnosis at the health centres as well as semi-structured interviews with 30 pregnant women and nine health care providers were conducted. Data was analysed using qualitative content analysis. There were significant differences in the process of GDM screening and diagnosis in the urban and rural settings. Several factors hindering or facilitating timely initiation and completion of the process were identified. Timely attendance required awareness, motivation and opportunity to attend. Women had to attend the health centre at the right time and sometimes at the right gestational age to initiate the test, wait to complete the test and obtain the test report in time to initiate further action. All these steps and requirements were influenced by factors within and outside the health system such as getting right information from health care providers, clinic timings, characteristics of the test, availability of transport, social network and support, and social norms and cultural practices. Minimising and aligning complex stepwise processes of prenatal care and GDM screening delivery and attention to the factors influencing it are important for further improving and expanding GDM screening and related services, not only in Tamil Nadu but in other similar low and middle income settings. This study stresses the importance of guidelines and diagnostic criteria which are simple and feasible on the ground.

One-parameter family of time-symmetric initial data for the radial infall of a particle into a Schwarzschild black hole

International Nuclear Information System (INIS)

Martel, Karl; Poisson, Eric

2002-01-01

A one-parameter family of time-symmetric initial data for the radial infall of a particle into a Schwarzschild black hole is constructed within the framework of black-hole perturbation theory. The parameter measures the amount of gravitational radiation present on the initial spacelike surface. These initial data sets are then evolved by integrating the Zerilli-Moncrief wave equation in the presence of the particle. Numerical results for the gravitational waveforms and their power spectra are presented; we show that the choice of initial data strongly influences the waveforms, both in their shapes and their frequency content. We also calculate the total energy radiated by the particle-black-hole system, as a function of the initial separation between the particle and the black hole, and as a function of the choice of initial data. Our results confirm that for large initial separations, a conformally flat initial three-geometry minimizes the initial gravitational-wave content, so that the total energy radiated is also minimized. For small initial separations, however, we show that the conformally flat solution no longer minimizes the energy radiated

Enhancement mechanisms of short-time aerobic digestion for waste activated sludge in the presence of cocoamidopropyl betaine.

Science.gov (United States)

Xia, Siqing; Zhou, Yun; Eustance, Everett; Zhang, Zhiqiang

2017-10-18

Cocoamidopropyl betaine (CAPB), which is a biodegradable ampholytic surfactant, has recently been found to dramatically enhance the aerobic digestion of waste activated sludge (WAS) in short-time aerobic digestion (STAD) systems. Therefore, it is important to understand the mechanisms in which CAPB enhances WAS aerobic digestion performance. Results showed that CAPB could dramatically enhance the solubilization of soluble proteins (PN), polysaccharides (PS), nucleic acids (NA) and humic-like substances (HS) in the STAD system within the initial 2 h. Then PN, PS and NA gradually decreased, while HS showed only minor decease. In addition, CAPB increased the proportion of low MW fractions (biodegradable. Specific oxygen uptake rates and dehydrogenase enzyme activity results indicated that CAPB markedly improved the aerobic microorganism activities. Microbial community analyses and principle coordinate analyses (PCoA) revealed that CAPB increased the proportion of some functional microorganisms, including Proteobacteria, Planctomycetales, Acinetobacter, Pseudomonas and Aeromonas. The changes driven by CAPB could explain the enhanced performance of the STAD system for WAS aerobic treatment.

Factorizing the time evolution operator

International Nuclear Information System (INIS)

Garcia Quijas, P C; Arevalo Aguilar, L M

2007-01-01

There is a widespread belief in the quantum physical community, and textbooks used to teach quantum mechanics, that it is a difficult task to apply the time evolution operator e itH-hat/h on an initial wavefunction. Because the Hamiltonian operator is, generally, the sum of two operators, then it is not possible to apply the time evolution operator on an initial wavefunction ψ(x, 0), for it implies using terms like (a-hat + b-hat). A possible solution is to factorize the time evolution operator and then apply successively the individual exponential operator on the initial wavefunction. However, the exponential operator does not directly factorize, i.e. e a-hat+b-hat ≠ e a-hat e b-hat . In this study we present a useful procedure for factorizing the time evolution operator when the argument of the exponential is a sum of two operators, which obey specific commutation relations. Then, we apply the exponential operator as an evolution operator for the case of elementary unidimensional potentials, like a particle subject to a constant force and a harmonic oscillator. Also, we discuss an apparent paradox concerning the time evolution operator and non-spreading wave packets addressed previously in the literature

Setting up tunneling conditions by means of Bohmian mechanics

Energy Technology Data Exchange (ETDEWEB)

Sanz, A S; Miret-Artes, S, E-mail: asanz@iff.csic.es, E-mail: s.miret@iff.csic.es [Instituto de Fisica Fundamental-CSIC, Serrano 123, 28006 Madrid (Spain)

2011-12-02

Usually tunneling is established after imposing some matching conditions on the (time-independent) wavefunction and its first derivative at the boundaries of a barrier. Here an alternative scheme is proposed to determine tunneling and estimate transmission probabilities in time-dependent problems, which takes advantage of the trajectory picture provided by Bohmian mechanics. From this theory, a general functional expression for the transmission probability in terms of the system initial state can be reached. This expression is used here to analyze tunneling properties and estimate transmissions in the case of initial Gaussian wave packets colliding with ramp-like barriers. (paper)

Habituation of the initial responses to cold water immersion in humans: a central or peripheral mechanism?

Science.gov (United States)

Tipton, M J; Eglin, C M; Golden, F S

1998-10-15

1. The initial respiratory and cardiac responses to cold water immersion are thought to be responsible for a significant number of open water deaths each year. Previous research has demonstrated that the magnitude of these responses can be reduced by repeated immersions in cold waterwhether the site of habituation is central or peripheral. 2. Two groups of subjects undertook two 3 min head-out immersions in stirred water at 10 C of the right-hand side of the body (R). Between these two immersions (3 whole days) the control group (n = 7) were not exposed to cold water, but the habituation group (n = 8) undertook a further six 3 min head-out immersions in stirred water at 10 C of the left-hand side of the body (L). 3. Repeated L immersions reduced (P immersion a reduction (P < 0.05) in the magnitude of the responses evoked was seen in the habituation group but not in the control group, despite both groups having identical skin temperature profiles. 4. It is concluded that the mechanisms involved in producing habituation of the initial responses are located more centrally than the peripheral receptors.

Stress corrosion cracking of Alloy 82 in hydrogenated steam at 400 C: influence of microstructural and mechanical parameters on initiation of SCC cracks

International Nuclear Information System (INIS)

Chaumun, Elizabeth

2016-01-01

In Pressurize Water Reactors (PWR), Stress Corrosion Cracking (SCC) is the mean degradation mode of components pieced together by welding. Nickel based alloys are, among others, used in dissimilar metal welding (DMW). International report showed only 3 cracking cases in Alloy 82 out of 300 cracking cases concerned on nickel based alloys DMW in primary water circuit. The aim of this study is to identify which microstructural and local mechanism parameters at microstructure scale provide the initiation of SCC cracks. Characterizations performed on specimen surface to identify those parameters are composed of chemical composition analysis and EBSD analysis (Electron Back-Scattered Diffraction) to know the morphology and the crystallography of grains for microstructure features on one hand, and experimental strain fields measured by Digital Imaging Correlation (DIC) of gold micro-grids deposed by electronic lithography on U-bend specimen surface and stress fields calculated along grains boundaries by finite element for local mechanical features on the other hand. The correlation between those characterizations and localization of initiation sites of SCC cracks, obtained on U-bend specimens tested in autoclave in hydrogen steam water at 400 C and 188 bar for 3500 hours, confirmed the susceptibility of the Alloy 82 in SCC conditions with intergranular SCC cracks. The perpendicular position to the loading direction (mode I) is the worst conditions for grains boundary in SCC. The others points concern the chemical composition (precipitation, impurities) around grain boundary and the grain boundary type which is more susceptible when it is a High Angle Grain Boundary. It is following by the mechanical characterization (stress and strain gradient) along grain boundary. This methodology can be used to other material and helped to define which microstructural and mechanical parameter can be define the initiation of SCC cracks. (author) [fr

Time to insulin initiation can not be used in defining Latent Autoimmune Diabetes in Adults [LADA

DEFF Research Database (Denmark)

Brophy, S; Yderstræde, K; Mauricio, D

2007-01-01

and clinicians reported on criteria for initiating insulin. All patients were tested for glutamic acid decarboxylase autoantibodies (GADA) in a central laboratory. We examined time to insulin treatment for GADA positive patients in 6 participating centres. Results: There was inter-centre variation......Objective: Latent Autoimmune Diabetes in Adults [LADA] is type 1 diabetes presenting as non-insulin dependent diabetes. One feature of the selection criteria is time independent of insulin treatment. We examine the validity of this criterion. Methods: Patients were recruited in 9 European centres...

Role of hormones in controlling vascular differentiation and the mechanism of lateral root initiation.

Science.gov (United States)

Aloni, Roni

2013-11-01

The vascular system in plants is induced and controlled by streams of inductive hormonal signals. Auxin produced in young leaves is the primary controlling signal in vascular differentiation. Its polar and non-polar transport pathways and major controlling mechanisms are clarified. Ethylene produced in differentiating protoxylem vessels is the signal that triggers lateral root initiation, while tumor-induced ethylene is a limiting and controlling factor of crown gall development and its vascular differentiation. Gibberellin produced in mature leaves moves non-polarly and promotes elongation, regulates cambium activity and induces long fibers. Cytokinin from the root cap moves upward to promote cambial activity and stimulate shoot growth and branching, while strigolactone from the root inhibits branching. Furthermore, the role of the hormonal signals in controlling the type of differentiating vascular elements and gradients of conduit size and density, and how they regulate plant adaptation and have shaped wood evolution are elucidated.

Timing of Initiating Glycopeptide Therapy for Methicillin-Resistant Staphylococcus aureus Bacteremia: The Impact on Clinical Outcome

Directory of Open Access Journals (Sweden)

Chen-Hsiang Lee

2013-01-01

Full Text Available When a Staphylococcus-like organism (SLO is microscopically found in Gram staining of blood culture (BC specimen, it seems reasonable to administrate a glycopeptide (GP for empirical therapy. The paper investigates the risk factors for 14-day mortality in patients with methicillin-resistance Staphylococcus aureus bacteremia (MRSAB and clarifies the impact of the timing for initiating GP therapy. A retrospective study identifies patients with MRSAB (endocarditis was excluded between 2006 and 2009. Patients were categorized as receiving GP at the interval before a preliminary BC report indicating the growth of SLO and the onward 24 hours or receiving GP 24 h after a preliminary BC report indicating the growth of SLO. Total 339 patients were enrolled. There was no difference on the 14-day overall or infection-related mortality rates at the time to administer GP. Multivariate analysis disclosed pneumonia (OR = 4.47; of 95% CI; of 2.09–9.58; and high APACHE II score (OR, 2.81, with 95% CI, 1.19–6.65; were independent risk factors for infection-related mortality. The mortality rate did not decrease following administrating GP immediately after a preliminary BC indicating SLO growth. An additional research for the optimal timing for initiating GP treatment is warranted.

From interatomic interaction potentials via Einstein field equation techniques to time dependent contact mechanics

International Nuclear Information System (INIS)

Schwarzer, N

2014-01-01

In order to understand the principle differences between rheological or simple stress tests like the uniaxial tensile test to contact mechanical tests and the differences between quasistatic contact experiments and oscillatory ones, this study resorts to effective first principles. This study will show how relatively simple models simulating bond interactions in solids using effective potentials like Lennard-Jones and Morse can be used to investigate the effect of time dependent stress-induced softening or stiffening of these solids. The usefulness of the current study is in the possibility of deriving relatively simple dependences of the bulk-modulus B on time, shear and pressure P with time t. In cases where it is possible to describe, or at least partially describe a material by Lennard-Jones potential approaches, the above- mentioned dependences are even completely free of microscopic material parameters. Instead of bond energies and length, only specific integral parameters like Young’s modulus and Poisson’s ratio are required. However, in the case of time dependent (viscose) material behavior the parameters are not constants anymore. They themselves depend on time and the actual stress field, especially the shear field. A body completely consisting of so called standard linear solid interacting particles will then phenomenologically show a completely different and usually much more complicated mechanical behavior. The influence of the time dependent pressure-shear-induced Young’s modulus change is discussed with respect to mechanical contact experiments and their analysis in the case of viscose materials. (papers)

INITIATORS AND TRIGGERING CONDITIONS FOR ADAPTIVE AUTOMATION IN ADVANCED SMALL MODULAR REACTORS

Energy Technology Data Exchange (ETDEWEB)

Katya L Le Blanc; Johanna h Oxstrand

2014-04-01

It is anticipated that Advanced Small Modular Reactors (AdvSMRs) will employ high degrees of automation. High levels of automation can enhance system performance, but often at the cost of reduced human performance. Automation can lead to human out-of the loop issues, unbalanced workload, complacency, and other problems if it is not designed properly. Researchers have proposed adaptive automation (defined as dynamic or flexible allocation of functions) as a way to get the benefits of higher levels of automation without the human performance costs. Adaptive automation has the potential to balance operator workload and enhance operator situation awareness by allocating functions to the operators in a way that is sensitive to overall workload and capabilities at the time of operation. However, there still a number of questions regarding how to effectively design adaptive automation to achieve that potential. One of those questions is related to how to initiate (or trigger) a shift in automation in order to provide maximal sensitivity to operator needs without introducing undesirable consequences (such as unpredictable mode changes). Several triggering mechanisms for shifts in adaptive automation have been proposed including: operator initiated, critical events, performance-based, physiological measurement, model-based, and hybrid methods. As part of a larger project to develop design guidance for human-automation collaboration in AdvSMRs, researchers at Idaho National Laboratory have investigated the effectiveness and applicability of each of these triggering mechanisms in the context of AdvSMR. Researchers reviewed the empirical literature on adaptive automation and assessed each triggering mechanism based on the human-system performance consequences of employing that mechanism. Researchers also assessed the practicality and feasibility of using the mechanism in the context of an AdvSMR control room. Results indicate that there are tradeoffs associated with each

Effect of a Disintegration Mechanism on Wetting, Water Absorption, and Disintegration Time of Orodispersible Tablets

OpenAIRE

Pabari, RM; Ramtoola, Z

2012-01-01

The aim of this study was to evaluate the influence of disintegration mechanism of various types of disintegrants on the absorption ratio (AR), wetting time (WT), and disintegration time (DT) of orodispersible tablets (ODTs). ODTs were prepared by direct compression using mannitol as filler and disintegrants selected from a range of swellable, osmotic, and porous disintegrants. Tablets formed were characterized for their water AR, WT, and DT. The porosity and mechanical strength of the tablet...

Initial design process of the repository

International Nuclear Information System (INIS)

Osmanlioglu, A.E.

2001-01-01

The concept of the final disposal of high level wastes is to isolate the waste from the biosphere for extremely long periods of time by emplacement of wastes into deep stable geological formations. Several geological formations have been considered as candidate host environments for high level waste disposal and several techniques have been developed for repository design. In this study, interrelationships of main parameters of a general repository design have been defined and effective parameters are shown at each step. Initial design process is based on the long term stability of underground openings as disposal galleries. For this reason, this design process includes two main analyses: mechanical analysis and thermal analysis. Each of the analysis systems is directly related to each other by technical precautions. As a result of this design process, general information about the acceptable depth of the repository, layout and emplacement pattern can be taken. Final design study can be established on the result of initial design process. (author)

Predictors of nonfunctional arteriovenous access at hemodialysis initiation and timing of access creation: A registry-based study.

Directory of Open Access Journals (Sweden)

Natalia Alencar de Pinho

Full Text Available Determinants of nonfunctional arteriovenous (AV access, including timing of AV access creation, have not been sufficiently described. We studied 29 945 patients who had predialysis AV access placement and were included in the French REIN registry from 2005 through 2013. AV access was considered nonfunctional when dialysis began with a catheter. We estimated crude and adjusted odds ratio (OR with 95% confidence intervals (CI of nonfunctional versus functional AV access associated with case-mix, facility characteristics, and timing of AV access creation. Analyses were stratified by dialysis start condition (planned or as an emergency and comorbidity profile. Overall, 18% patients had nonfunctional AV access at hemodialysis initiation. In the group with planned dialysis start, female gender (OR 1.43, 95% CI 1.32-1.56, diabetes (OR 1.28, 95% CI 1.15-1.44, and a higher number of cardiovascular comorbidities (OR 1.27, 95% CI 1.09-1.49, and 1.31, 1.05-1.64, for 3 and >3 cardiovascular comorbidities versus none, respectively were independent predictors of nonfunctional AV access. A higher percentage of AV access creation at the region level was associated with a lower rate of nonfunctional AV access (OR 0.98, 95% CI 0.98-0.99 per 1% increase. The odds of nonfunctional AV access decreased as time from creation to hemodialysis initiation increased up to 3 months in nondiabetic patients with fewer than 2 cardiovascular comorbidities and 6 months in patients with diabetes or 2 or more such comorbidities. In conclusion, both patient characteristics and clinical practices may play a role in successful AV access use at hemodialysis initiation. Adjusting the timing of AV access creation to patients' comorbidity profiles may improve functional AV access rates.

On the Definition Mechanism of Initial Water Rights%初始水权界定机制的比较与选择

Institute of Scientific and Technical Information of China (English)

王丙毅

2015-01-01

水权界定即水权的初次分配及其权利主体的清晰化，是水权配置过程中的首要环节，也是水权交易和水市场形成的基础和前提。水权配置机制主要包括行政机制、市场机制和自主协商机制。利用完全信息静态博弈模型和动态重复博弈模型对水权界定机制进行分析所得出的结论是：私人之间以竞争的方式来界定初始水权，会造成“公地悲剧”，甚至分水冲突的发生；自主协商机制虽然能够在小规模人群之间实现初始水权的分配，但其分水协议不具有强制性约束力，特别是在人数较多的情况下，分水协议更不具有约束力。唯有民主协商基础上的政府行政机制才是水权界定的最佳选择。%To definite the initial water rights means the first allocation of water rights and the clear of water rights owner witch is not only the first step in the process of water rights allocation, but also the basis and premise of water rights trading and water market.The mechanisms of allocation of Water rights generally include administrative mechanism, market mechanism and independent negotiation mechanism.Through the analysis by u-sing the complete information static game model and dynamic game model for water rights distribution mechanism , we concluded that:the competi-tion between private to the way to define the initial water rights , will cause the"tragedy of the commons", even the water conflict;autonomous ne-gotiation mechanism can realize the initial allocation of water rights in small groups , but the water diversion agreement is not mandatory and bind-ing, especially in a large number of cases, the water protocol is not binding.Only on the basis of deliberative democracy, government administrative mechanism is the best choice of the definition of water rights .

The mechanism of suppression of quantum transitions (quantum whirligig)

International Nuclear Information System (INIS)

Buts, V.A.

2010-01-01

The mechanism allowing to stabilize of a state of quantum systems is considered. And, the initial condition can correspond both for excited state and for not excited, stationary state. The considered mechanism for the first time was offered for the excited states, and has received the name as quantum whirligig (QWE). In this work the close connection of the considered mechanism with Zeno effect is shown. The considerations are stated, that many experimental results, which are interpreted as observation of Zeno effect, apparently, correspond to QWE.

Fenton-like initiation of a toluene transformation mechanism

Science.gov (United States)

In Fenton-driven oxidation treatment systems, reaction intermediates derived from parent compounds can play a significant role in the overall treatment process. Fenton-like reactions in the presence of toluene or benzene, involved a transformation mechanism that was highly effici...

Evaluation of the MOST (Making the Most of Out-of-School Time) Initiative: Final Report. Summary of Findings. Discussion Paper.

Science.gov (United States)

Halpern, Robert; Spielberger, Julie; Robb, Sylvan

The University of Chicago's Chapin Hall Center for Children conducted an evaluation of the first phase (1995-1998) of the MOST (Making the Most of Out-of-School Time) Initiative of the Wallace-Reader's Digest Funds. The objectives of this initiative were to contribute to the supply, accessibility, affordability, and quality of after-school…

The impact of ART initiation on household food security over time.

Science.gov (United States)

Patenaude, Bryan N; Chimbindi, Natsayi; Pillay, Deenan; Bärnighausen, Till

2018-02-01

While evidence suggests that adequate nutrition contributes to the efficacy of ART, the potential causal impact of ART initiation on household food security has not been thoroughly examined. In this study, we present some of the first causal evidence of the impact of ART initiation on household food security. We employ a quasi-experimental design, regression discontinuity, over 5540 individuals from an ongoing population cohort study in KwaZulu-Natal, South Africa, by utilizing the CD4 count-based ART eligibility threshold to examine the impact of ART initiation on household food security. We find that ART initiation causes a significant increase in the probability of food insecurity in the first year, which diminishes to zero within three years of initiation. Within the first year, ART initiation was found to significantly increase the probabilities that (1) the surveyed adult had missed any food in the past month by 10.2 percentage points (coefficient = 0.102, 95%CI = [0.039, 0.166]); (2) any adult in the household had missed a meal in the past month by 15.2 percentage points (coefficient = 0.152, 95%CI = [0.073, 0.231]); and (3) any child in the household had missed a meal in the past month by 8.9 percentage points (coefficient = 0.0898, 95%CI = [0.0317, 0.148]). While we cannot definitively isolate the mechanistic pathways from ART to household food security, our results are consistent with ART affecting food security through household resource strain and patient appetite recovery. Several policies could mitigate the negative impact of ART on food security, in particular food parcels or food vouchers for ART patients in the first two years after treatment initiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The assessment of creep-fatigue initiation and crack growth

International Nuclear Information System (INIS)

Priest, R.H.; Miller, D.A.

1991-01-01

An outline of Nuclear Electric's Assessment Procedure for the High Temperature Response of Structures ('R5') for creep-fatigue initiation and crack growth is given. A unified approach is adopted for both regimes. For initiation, total damage is described in terms of separate creep and fatigue components. Ductility exhaustion is used for estimating creep damage whilst continuous cycling endurance data are used to evaluate the fatigue damage term. Evidence supporting this approach is given through the successful prediction of creep-fatigue endurances for a range of materials, cycle types, dwell period times, etc. Creep-fatigue crack growth is similarly described in terms of separated creep and fatigue components. Crack growth rates for each component are characterised in terms of fracture mechanics parameters. It is shown that creep crack growth rates can be rationalised on a ductility basis. Creep-fatigue interactions are accommodated in the cyclic growth component through the use of materials coefficients which depend on dwell time. (orig.)

Lightning initiation mechanism based on the development of relativistic runaway electron avalanches triggered by background cosmic radiation: Numerical simulation

International Nuclear Information System (INIS)

Babich, L. P.; Bochkov, E. I.; Kutsyk, I. M.

2011-01-01

The mechanism of lightning initiation due to electric field enhancement by the polarization of a conducting channel produced by relativistic runaway electron avalanches triggered by background cosmic radiation has been simulated numerically. It is shown that the fields at which the start of a lightning leader is possible even in the absence of precipitations are locally realized for realistic thundercloud configurations and charges. The computational results agree with the in-situ observations of penetrating radiation enhancement in thunderclouds.

Lightning initiation mechanism based on the development of relativistic runaway electron avalanches triggered by background cosmic radiation: Numerical simulation

Energy Technology Data Exchange (ETDEWEB)

Babich, L. P., E-mail: babich@elph.vniief.ru; Bochkov, E. I.; Kutsyk, I. M. [All-Russian Research Institute of Experimental Physics, Russian Federal Nuclear Center (Russian Federation)

2011-05-15

The mechanism of lightning initiation due to electric field enhancement by the polarization of a conducting channel produced by relativistic runaway electron avalanches triggered by background cosmic radiation has been simulated numerically. It is shown that the fields at which the start of a lightning leader is possible even in the absence of precipitations are locally realized for realistic thundercloud configurations and charges. The computational results agree with the in-situ observations of penetrating radiation enhancement in thunderclouds.

The complexity of simplifications in the teaching of mechanics at the university initial cycle: the case of the treatment of pulleys in textbooks

Directory of Open Access Journals (Sweden)

Silvia María Giorgi

2017-08-01

Full Text Available We present a study on mechanics textbooks widely used in physics courses of the university initial cycle of scientific and technological careers that form part of Spanish-speaking universities. Through a content analysis, we investigated the explanations given by the authors of the textbooks about the "simplifying" hypotheses adopted to address the study of the behavior of pulleys in the initial mechanics topics. Those consist in considering pulleys massless and frictionless. On the other hand, we analyzed if these assumptions are reconsidered in the study of solids in rotation. We concluded  that, although simplifying assumptions are included in teaching to facilitate the understanding of physics phenomena by students, they are not always clarifying, leading to hinder, rather than simplify, the conceptualization applied to the behavior of physical systems when they study from textbooks. Issues that could be useful to teachers are warned.

Optimal timing of renal replacement therapy initiation in acute kidney injury: the elephant felt by the blindmen?

Science.gov (United States)

Shiao, Chih-Chung; Huang, Tao-Min; Spapen, Herbert D; Honore, Patrick M; Wu, Vin-Cent

2017-06-20

Renal replacement therapy (RRT) is a key component in the management of severe acute kidney injury (AKI) in critically ill patients. Many cohort studies, meta-analyses, and two recent large randomized prospective trials which evaluated the relationship between the timing of RRT initiation and patient outcome remain inconclusive due to substantial differences in study design, patient population, AKI definition, and RRT indication. A cause-specific diagnosis of AKI based on current staging criteria plus a sensitive biomarker (panel) that allows creating a homogeneous study population is definitely needed to assess the impact of early versus late initiation of RRT on patient outcome.

Inflation with generalized initial conditions

International Nuclear Information System (INIS)

Albrecht, A.; Brandenberger, R.; Matzner, R.

1987-01-01

In many current models of the early Universe a scalar field phi which is only very weakly coupled to other quantum fields is used to generate inflation. In such models there are no forces which could thermalize the scalar field, and previous assumptions about its preinflation ''initial'' conditions must be abandoned. In this paper the onset of inflation is studied classically for more general initial conditions of the scalar field configuration. In particular, initial conditions with a nonvanishing spatial average of phi, with phi chosen at random in each initial horizon volume, and with random initial momenta are considered. We identify and discuss several mechanisms that can drive these more general initial conditions toward an inflationary state. The analysis is done in one spatial dimension

Open Source Initiative Powers Real-Time Data Streams

Science.gov (United States)

2014-01-01

Under an SBIR contract with Dryden Flight Research Center, Creare Inc. developed a data collection tool called the Ring Buffered Network Bus. The technology has now been released under an open source license and is hosted by the Open Source DataTurbine Initiative. DataTurbine allows anyone to stream live data from sensors, labs, cameras, ocean buoys, cell phones, and more.

Thermal behaviors of mechanically activated pyrites by thermogravimetry (TG)

International Nuclear Information System (INIS)

Hu Huiping; Chen Qiyuan; Yin Zhoulan; Zhang Pingmin

2003-01-01

The thermal decompositions of mechanically activated and non-activated pyrites were studied by thermogravimetry (TG) at the heating rate of 10 K min -1 in argon. Results indicate that the initial temperature of thermal decomposition (T di ) in TG curves for mechanically activated pyrites decreases gradually with increasing the grinding time. The specific granulometric surface area (S G ), the structural disorder of mechanically activated pyrites were analyzed by X-ray diffraction laser particle size analyzer, and X-ray powder diffraction analysis (XRD), respectively. The results show that the S G of mechanically activated pyrites remains almost constant after a certain grinding time, and lattice distortions (ε) rise but the crystallite sizes (D) decrease with increasing the grinding time. All these results imply that the decrease of T di in TG curves of mechanically activated pyrites is mainly caused by the increase of lattice distortions ε and the decrease of the crystallite sizes D of mechanically activated pyrite with increasing the grinding time. The differences in the reactivity between non-activated and mechanically activated pyrites were observed using characterization of the products obtained from 1 h treatment of non-activated and mechanically activated pyrites at 713 K under inert atmosphere and characterization of non-activated and mechanically activated pyrites exposed to ambient air for a certain period

Effect of mechanical activation on structure and thermal decomposition of aluminum sulfate

International Nuclear Information System (INIS)

Ghasri-Khouzani, M.; Meratian, M.; Panjepour, M.

2009-01-01

The thermal decompositions of both non-activated and mechanically activated aluminum sulfates were studied by thermogravimetry (TG). The structural disorder, the specific surface area (SSA) and the morphology of mechanically activated aluminum sulfates were analyzed by X-ray diffraction (XRD), laser particle-size analyzer, and scanning electron microscopy (SEM), respectively. Thermal analyses results indicated that the initial temperature of thermal decomposition (T i ) in TG curves for mechanically activated aluminum sulfates decreased gradually with increasing the milling time. It was also found that the SSA of mechanically activated aluminum sulfates remained almost constant after a certain milling time, and lattice strains (ε) rose but the crystallite sizes (D) decreased with increasing the milling time. These results showed that the decrease of T i in TG curves of mechanically activated aluminum sulfates was mainly caused by the increase of lattice distortions and decrease of the crystallite sizes with increasing the milling time

Mechanism by which BMI influences leisure-time physical activity behavior.

Science.gov (United States)

Godin, Gaston; Bélanger-Gravel, Ariane; Nolin, Bertrand

2008-06-01

The objective of this prospective study was to clarify the mechanism by which BMI influences leisure-time physical activity. This was achieved in accordance with the assumptions underlying the Theory of Planned Behavior (TPB), considered as one of the most useful theories to predict behavior adoption. At baseline, a sample of 1,530 respondents completed a short questionnaire to measure intention and perceived behavioral control (PBC), the two proximal determinants of behavior of TPB. Past behavior, sociodemographic variables, and weight and height were also assessed. The dependent variable, leisure-time physical activity was assessed 3 months later. Hierarchical multiple regression analyses revealed that BMI is a direct predictor of future leisure-time physical activity, not mediated by the variables of TPB. Additional hierarchical analyses indicated that BMI was not a moderator of the intention-behavior and PBC-behavior relationships. The results of this study suggest that high BMI is a significant negative determinant of leisure-time physical activity. This observation reinforces the importance of preventing weight gain as a health promotion strategy for avoiding a sedentary lifestyle.

A Time-Space Symmetry Based Cylindrical Model for Quantum Mechanical Interpretations

Science.gov (United States)

Vo Van, Thuan

2017-12-01

Following a bi-cylindrical model of geometrical dynamics, our study shows that a 6D-gravitational equation leads to geodesic description in an extended symmetrical time-space, which fits Hubble-like expansion on a microscopic scale. As a duality, the geodesic solution is mathematically equivalent to the basic Klein-Gordon-Fock equations of free massive elementary particles, in particular, the squared Dirac equations of leptons. The quantum indeterminism is proved to have originated from space-time curvatures. Interpretation of some important issues of quantum mechanical reality is carried out in comparison with the 5D space-time-matter theory. A solution of lepton mass hierarchy is proposed by extending to higher dimensional curvatures of time-like hyper-spherical surfaces than one of the cylindrical dynamical geometry. In a result, the reasonable charged lepton mass ratios have been calculated, which would be tested experimentally.

Initiation precursors and initiators in laser-induced copolymerization of styrene and maleic anhydride in acetone

Science.gov (United States)

Miner, Gilda A.; Meador, Willard E.; Chang, C. Ken

1990-01-01

The initiation step of photopolymerized styrene/maleic anhydride copolymer was investigated at 365 nm. UV absorption measurements provide decisive evidence that the styrene/maleic anhydride charge transfer complex is the sole absorbing species; however, key laser experiments suggest intermediate reactions lead to a monoradical initiating species. A mechanism for the photoinitiation step of the copolymer is proposed.

Dynamic mechanical thermal analysis of composite resins with CQ and PPD as photo-initiators photoactivated by QTH and LED units.

Science.gov (United States)

Brandt, William Cunha; Silva, Cristina Gomes; Frollini, Elisabete; Souza-Junior, Eduardo Jose Carvalho; Sinhoreti, Mário Alexandre Coelho

2013-08-01

The aim of this study was to evaluate the thermal and mechanical properties of the composite resins containing the photo-initiators camphorquinone (CQ) and/or phenyl-propanodione (PPD) when photoactivated with halogen lamp (XL2500/3M-ESPE), monowave (UltraBlueIS/DMC) and polywave (UltraLume5/Ultradent) LED units. A blend of BisGMA, UDMA, BisEMA and TEGDMA was prepared with the same wt% of photo-initiators CQ and/or PPD and 65wt% of silaneted filler particles. Compression strength (CS), diametral tensile strength (DTS) and diametral modulus (DM) were tested. Thermogravimetric analysis (TGA) was made and the lost residual monomer were verified. Dynamic mechanical thermal analysis (DMTA) was used for to analyze the glass transition temperature (Tg) and the storage modulus in 37°C. Degree of conversion (DC) was accomplished in the same samples of DMA using middle-infrared spectroscopy (mid-IR). CQ, CQ/PPD and PPD obtained the same results for all mechanical properties (CS, DTS and DM), lost residual monomer and storage modulus in 37°C, regardless LCU used. The results of Tg showed that the combination PPD-UltraLume5 produced the highest values. DC showed that the combination CQ-UltraLume5 resulted in the highest values and PPD-XL2500 in the lowest DC values. The study shows that PPD is not only effective photosensitizers, but also photocrosslinking agents for dental composite resins with a similar efficiency to CQ. Copyright © 2013 Elsevier Ltd. All rights reserved.

Patient satisfaction and barriers to initiating real-time continuous glucose monitoring in early pregnancy in women with diabetes

DEFF Research Database (Denmark)

Secher, A L; Madsen, A B; Nielsen, Lene Ringholm

2012-01-01

of initial monitoring). Ten women (15%) did not wish to use continuous glucose monitoring again in pregnancy. Main causes behind early removal of continuous glucose monitoring were self-reported skin irritation, technical problems and continuous glucose monitoring inaccuracy. No differences were found......Aim: To evaluate self-reported satisfaction and barriers to initiating real-time continuous glucose monitoring in early pregnancy among women with pregestational diabetes. Methods: Fifty-four women with Type 1 diabetes and 14 women with Type 2 diabetes were offered continuous glucose monitoring...

Mechanisms of time-based figure-ground segregation.

Science.gov (United States)

Kandil, Farid I; Fahle, Manfred

2003-11-01

Figure-ground segregation can rely on purely temporal information, that is, on short temporal delays between positional changes of elements in figure and ground (Kandil, F.I. & Fahle, M. (2001) Eur. J. Neurosci., 13, 2004-2008). Here, we investigate the underlying mechanisms by measuring temporal segregation thresholds for various kinds of motion cues. Segregation can rely on monocular first-order motion (based on luminance modulation) and second-order motion cues (contrast modulation) with a high temporal resolution of approximately 20 ms. The mechanism can also use isoluminant motion with a reduced temporal resolution of 60 ms. Figure-ground segregation can be achieved even at presentation frequencies too high for human subjects to inspect successive frames individually. In contrast, when stimuli are presented dichoptically, i.e. separately to both eyes, subjects are unable to perceive any segregation, irrespective of temporal frequency. We propose that segregation in these displays is detected by a mechanism consisting of at least two stages. On the first level, standard motion or flicker detectors signal local positional changes (flips). On the second level, a segregation mechanism combines the local activities of the low-level detectors with high temporal precision. Our findings suggest that the segregation mechanism can rely on monocular detectors but not on binocular mechanisms. Moreover, the results oppose the idea that segregation in these displays is achieved by motion detectors of a higher order (motion-from-motion), but favour mechanisms sensitive to short temporal delays even without activation of higher-order motion detectors.

iTRAQ-Based Quantitative Proteomic Analysis of the Initiation of Head Regeneration in Planarians.

Directory of Open Access Journals (Sweden)

Xiaofang Geng

Full Text Available The planarian Dugesia japonica has amazing ability to regenerate a head from the anterior ends of the amputated stump with maintenance of the original anterior-posterior polarity. Although planarians present an attractive system for molecular investigation of regeneration and research has focused on clarifying the molecular mechanism of regeneration initiation in planarians at transcriptional level, but the initiation mechanism of planarian head regeneration (PHR remains unclear at the protein level. Here, a global analysis of proteome dynamics during the early stage of PHR was performed using isobaric tags for relative and absolute quantitation (iTRAQ-based quantitative proteomics strategy, and our data are available via ProteomeXchange with identifier PXD002100. The results showed that 162 proteins were differentially expressed at 2 h and 6 h following amputation. Furthermore, the analysis of expression patterns and functional enrichment of the differentially expressed proteins showed that proteins involved in muscle contraction, oxidation reduction and protein synthesis were up-regulated in the initiation of PHR. Moreover, ingenuity pathway analysis showed that predominant signaling pathways such as ILK, calcium, EIF2 and mTOR signaling which were associated with cell migration, cell proliferation and protein synthesis were likely to be involved in the initiation of PHR. The results for the first time demonstrated that muscle contraction and ILK signaling might played important roles in the initiation of PHR at the global protein level. The findings of this research provide a molecular basis for further unraveling the mechanism of head regeneration initiation in planarians.

Application of Mathematica Software for Estimate the Fatigue Life Time Duration of Mechanical System

Directory of Open Access Journals (Sweden)

Petru Florin Minda

2010-10-01

Full Text Available The paper present how we can use Mathematica to solve the equations types usually used to determinate the maximum stress cycles that can be support by a mechanical system until he will be out of use. To illustrate the type of equations used in specialized literature to estimate fatigue life time duration was chosen a specific case of mechanical structure applied to fatigue. It is about lever button of runner blade mechanism of Kaplan turbine, that in function support a very intensive alternative strain.

Programmed Fetal Membrane Senescence and Exosome-Mediated Signaling: A Mechanism Associated With Timing of Human Parturition

Directory of Open Access Journals (Sweden)

Ramkumar Menon

2017-08-01

Full Text Available Human parturition is an inflammatory process that involves both fetal and maternal compartments. The precise immune cell interactions have not been well delineated in human uterine tissues during parturition, but insights into human labor initiation have been informed by studies in animal models. Unfortunately, the timing of parturition relative to fetal maturation varies among viviparous species—indicative of different phylogenetic clocks and alarms—but what is clear is that important common pathways must converge to control the birth process. Herein, we hypothesize a novel signaling mechanism initiated by human fetal membrane aging and senescence-associated inflammation. Programmed events of fetal membrane aging coincide with fetal growth and organ maturation. Mechanistically, senescence involves in telomere shortening and activation of p38 mitogen-activated signaling kinase resulting in aging-associated phenotypic transition. Senescent tissues release inflammatory signals that are propagated via exosomes to cause functional changes in maternal uterine tissues. In vitro, oxidative stress causes increased release of inflammatory mediators (senescence-associated secretory phenotype and damage-associated molecular pattern markers that can be packaged inside the exosomes. These exosomes traverse through tissues layers, reach maternal tissues to increase overall inflammatory load transitioning them from a quiescent to active state. Animal model studies have shown that fetal exosomes can travel from fetal to the maternal side. Thus, aging fetal membranes and membrane-derived exosomes cargo fetal signals to the uterus and cervix and may trigger parturition. This review highlights a novel hypothesis in human parturition research based on data from ongoing research using human fetal membrane model system.

A relational solution to the problem of time in quantum mechanics and quantum gravity: a fundamental mechanism for quantum decoherence

International Nuclear Information System (INIS)

Gambini, Rodolfo; Porto, Rafael A; Pullin, Jorge

2004-01-01

The use of a relational time in quantum mechanics is a framework in which one promotes to quantum operators all variables in a system, and later chooses one of the variables to operate like a 'clock'. Conditional probabilities are computed for variables of the system to take certain values when the 'clock' specifies a certain time. This framework is attractive in contexts where the assumption of usual quantum mechanics of the existence of an external, perfectly classical clock, appears unnatural, as in quantum cosmology. Until recently, there were problems with such constructions in ordinary quantum mechanics with additional difficulties in the context of constrained theories like general relativity. A scheme we recently introduced to consistently discretize general relativity removed such obstacles. Since the clock is now an object subject to quantum fluctuations, the resulting evolution in time is not exactly unitary and pure states decohere into mixed states. Here we work out in detail the type of decoherence generated, and we find it to be of Lindblad type. This is attractive since it implies that one can have loss of coherence without violating the conservation of energy. We apply the framework to a simple cosmological model to illustrate how a quantitative estimate of the effect could be computed. For most quantum systems it appears to be too small to be observed, although certain macroscopic quantum systems could in the future provide a testing ground for experimental observation

Impact of generic antiretroviral therapy (ART) and free ART programs on time to initiation of ART at a tertiary HIV care center in Chennai, India.

Science.gov (United States)

Solomon, Sunil S; Lucas, Gregory M; Kumarasamy, Nagalingeswaran; Yepthomi, Tokugha; Balakrishnan, Pachamuthu; Ganesh, Aylur K; Anand, Santhanam; Moore, Richard D; Solomon, Suniti; Mehta, Shruti H

2013-08-01

Antiretroviral therapy (ART) access in the developing world has improved, but whether increased access has translated to more rapid treatment initiation among those who need it is unknown. We characterize time to ART initiation across three eras of ART availability in Chennai, India (1996-1999: pregeneric; 2000-2003: generic; 2004-2007: free rollout). Between 1996 and 2007, 11,171 patients registered for care at the YR Gaitonde Centre for AIDS Research and Education (YRGCARE), a tertiary HIV referral center in southern India. Of these, 5726 patients became eligible for ART during this period as per Indian guidelines for initiation of ART. Generalized gamma survival models were used to estimate relative times (RT) to ART initiation by calendar periods of eligibility. Time to initiation of ART among patients in Chennai, India was also compared to an HIV clinical cohort in Baltimore, USA. Median age of the YRGCARE patients was 34 years; 77% were male. The median CD4 at presentation was 140 cells/µl. After adjustment for demographics, CD4 and WHO stage, persons in the pregeneric era took 3.25 times longer (95% confidence interval [CI]: 2.53-4.17) to initiate ART versus the generic era and persons in the free rollout era initiated ART more rapidly than the generic era (RT: 0.73; 95% CI: 0.63-0.83). Adjusting for differences across centers, patients at YRGCARE took longer than patients in the Johns Hopkins Clinical Cohort (JHCC) to initiate ART in the pregeneric era (RT: 4.90; 95% CI: 3.37-7.13) but in the free rollout era, YRGCARE patients took only about a quarter of the time (RT: 0.31; 95% CI: 0.22-0.44). These data demonstrate the benefits of generic ART and government rollouts on time to initiation of ART in one developing country setting and suggests that access to ART may be comparable to developed country settings.

Universal entrainment mechanism controls contact times with motile cells

Science.gov (United States)

Mathijssen, Arnold J. T. M.; Jeanneret, Raphaël; Polin, Marco

2018-03-01

Contact between particles and motile cells underpins a wide variety of biological processes, from nutrient capture and ligand binding to grazing, viral infection, and cell-cell communication. The window of opportunity for these interactions depends on the basic mechanism determining contact time, which is currently unknown. By combining experiments on three different species—Chlamydomonas reinhardtii, Tetraselmis subcordiforms, and Oxyrrhis marina—with simulations and analytical modeling, we show that the fundamental physical process regulating proximity to a swimming microorganism is hydrodynamic particle entrainment. The resulting distribution of contact times is derived within the framework of Taylor dispersion as a competition between advection by the cell surface and microparticle diffusion, and predicts the existence of an optimal tracer size that is also observed experimentally. Spatial organization of flagella, swimming speed, and swimmer and tracer size influence entrainment features and provide tradeoffs that may be tuned to optimize the estimated probabilities for microbial interactions like predation and infection.

A Solution of Time Dependent Schrodinger Equation by Quantum Walk

International Nuclear Information System (INIS)

Sekino, Hideo; Kawahata, Masayuki; Hamada, Shinji

2012-01-01

Time Dependent Schroedinger Equation (TDSE) with an initial Gaussian distribution, is solved by a discrete time/space Quantum Walk (QW) representing consecutive operations corresponding to a dot product of Pauli matrix and momentum operators. We call it as Schroedinger Walk (SW). Though an Hadamard Walk (HW) provides same dynamics of the probability distribution for delta-function-like initial distributions as that of the SW with a delta-function-like initial distribution, the former with a Gaussian initial distribution leads to a solution for advection of the probability distribution; the initial distribution splits into two distinctive distributions moving in opposite directions. Both mechanisms are analysed by investigating the evolution of the both amplitude components. Decoherence of the oscillating amplitudes in central region is found to be responsible for the splitting of the probability distribution in the HW.

Data forwarding mechanism for supporting real-time services during relocations in UMTS systems

Science.gov (United States)

Cai, Wei; Liao, Xianglong; Zheng, Liang; Liu, Zehong

2004-04-01

To minimize the interruption during the handovers or relocations invoked by subscribers moving is a very critical factor to enhance the performance of the UMTS systems. We know that the 2G systems have been optimized to minimize the interruption of speech during handovers by two main technologies: one is the bi-casting for the DL traffic and the other is the fast radio resynchronization by the UE for the UL traffic. In the UMTS systems, we have also implemented lossless relocations for non real-time services with high reliability by data buffering in the source RNC and target RNC for the UE. However, the UMTS systems support four QoS classes traffic flow: conversational class, streaming class, interactive class and background class. The main distinguishing factor between these QoS classes is how delay sensitive the traffic is: Conversational and Streaming classes are mainly used to carry real-time traffic flows, like video telephony, interactive and background classes are mainly used by traditional Internet applications like WWW, E-mail and FTP. It"s essential to provide the solutions for supporting real-time services to meet the requirement for QoS in UMTS systems. Apparently, the Data buffering mechanism is not adapted to real-time services because of it"s delay may exceed the basic requirement for real-time services. Under this background, the paper discussed two data forwarding solutions for real-time services from the PS domain in the UMTS systems: packet duplication and Core Network bi-casting. The former mechanism does not require any new procedures, messages nor information elements. The later mechanism requires that the GGSN or SGSN is able to bi-cast the DL traffic to the target RNC according to the relocations involving two SGSNs or just involving one SGSN. It also implicitly shows that we need change procedures at the nodes SGSN, GGSN and RNC which are involved in the relocation procedure based on existing procedures that we have already designed if

Timing of Initiation of Antiretroviral Therapy in Human Immunodeficiency Virus (HIV)–Associated Tuberculous Meningitis

Science.gov (United States)

Török, M. Estee; Yen, Nguyen Thi Bich; Chau, Tran Thi Hong; Mai, Nguyen Thi Hoang; Phu, Nguyen Hoan; Mai, Pham Phuong; Dung, Nguyen Thi; Van Vinh Chau, Nguyen; Bang, Nguyen Duc; Tien, Nguyen Anh; Minh, N. H.; Hien, Nguyen Quang; Thai, Phan Vuong Khac; Dong, Doan The; Anh, Do Thi Tuong; Thoa, Nguyen Thi Cam; Hai, Nguyen Ngoc; Lan, Nguyen Ngoc; Lan, Nguyen Thi Ngoc; Quy, Hoang Thi; Dung, Nguyen Huy; Hien, Tran Tinh; Chinh, Nguyen Tran; Simmons, Cameron Paul; de Jong, Menno; Wolbers, Marcel; Farrar, Jeremy James

2015-01-01

Background The optimal time to initiate antiretroviral therapy (ART) in human immunodeficiency virus (HIV)–associated tuberculous meningitis is unknown. Methods We conducted a randomized, double-blind, placebo-controlled trial of immediate versus deferred ART in patients with HIV-associated tuberculous meningitis to determine whether immediate ART reduced the risk of death. Antiretroviral drugs (zidovudine, lamivudine, and efavirenz) were started either at study entry or 2 months after randomization. All patients were treated with standard antituberculosis treatment, adjunctive dexamethasone, and prophylactic co-trimoxazole and were followed up for 12 months. We conducted intention-to-treat, per-protocol, and prespecified subgroup analyses. Results A total of 253 patients were randomized, 127 in the immediate ART group and 126 in the deferred ART group; 76 and 70 patients died within 9 months in the immediate and deferred ART groups, respectively. Immediate ART was not significantly associated with 9-month mortality (hazard ratio [HR], 1.12; 95% confidence interval [CI], .81–1.55; P = .50) or the time to new AIDS events or death (HR, 1.16; 95% CI, .87–1.55; P = .31). The percentage of patients with severe (grade 3 or 4) adverse events was high in both arms (90% in the immediate ART group and 89% in the deferred ART group; P = .84), but there were significantly more grade 4 adverse events in the immediate ART arm (102 in the immediate ART group vs 87 in the deferred ART group; P = .04). Conclusions Immediate ART initiation does not improve outcome in patients presenting with HIV-associated tuberculous meningitis. There were significantly more grade 4 adverse events in the immediate ART arm, supporting delayed initiation of ART in HIV-associated tuberculous meningitis. Clinical Trials Registration ISRCTN63659091. PMID:21596680

Time-dependent Taylor–Aris dispersion of an initial point concentration

DEFF Research Database (Denmark)

Vedel, Søren; Hovad, Emil; Bruus, Henrik

2014-01-01

-specific theoretical results, and furthermore predict new phenomena. In particular, for the transient phase before the well-described steady Taylor–Aris limit is reached, we find anomalous diffusion with a dependence of the temporal scaling exponent on the initial release point, generalizing this finding in specific...... cases. During this transient we furthermore identify maxima in the values of the dispersion coefficient which exceed the Taylor–Aris value by amounts that depend on channel geometry, initial point release position, velocity profile and Péclet number. We show that these effects are caused by a difference...

Transcriptome profiling reveals regulatory mechanisms underlying Corolla Senescence in Petunia

Science.gov (United States)

Genetic regulatory mechanisms that govern petal natural senescence in petunia is complicated and unclear. To identify key genes and pathways that regulate the process, we initiated a transcriptome analysis in petunia petals at four developmental time points, including petal opening without anthesis ...

Initiation of the microgene polymerization reaction with non-repetitive homo-duplexes

International Nuclear Information System (INIS)

Itsko, Mark; Zaritsky, Arieh; Rabinovitch, Avinoam; Ben-Dov, Eitan

2008-01-01

Microgene Polymerization Reaction (MPR) is used as an experimental system to artificially simulate evolution of short, non-repetitive homo-duplex DNA into multiply-repetitive products that can code for functional proteins. Blunt-end ligation by DNA polymerase is crucial in expansion of homo-duplexes (HDs) into head-to-tail multiple repeats in MPR. The propagation mechanism is known, but formation of the initial doublet (ID) by juxtaposing two HDs and polymerization through the gap has been ambiguous. Initiation events with pairs of HDs using Real-Time PCR were more frequent at higher HD concentrations and slightly below the melting temperature. A process molecularity of about 3.1, calculated from the amplification efficiency and the difference in PCR cycles at which propagation was detected at varying HD concentrations, led to a simple mechanism for ID formation: the gap between two HDs is bridged by a third. Considering thermodynamic aspects of the presumed intermediate 'nucleation complex' can predict relative propensity for the process with other HDs

Analysis of integrated multiple 'omics' datasets reveals the mechanisms of initiation and determination in the formation of tuberous roots in Rehmannia glutinosa.

Science.gov (United States)

Li, Mingjie; Yang, Yanhui; Li, Xinyu; Gu, Li; Wang, Fengji; Feng, Fajie; Tian, Yunhe; Wang, Fengqing; Wang, Xiaoran; Lin, Wenxiong; Chen, Xinjian; Zhang, Zhongyi

2015-09-01

All tuberous roots in Rehmannia glutinosa originate from the expansion of fibrous roots (FRs), but not all FRs can successfully transform into tuberous roots. This study identified differentially expressed genes and proteins associated with the expansion of FRs, by comparing the tuberous root at expansion stages (initiated tuberous root, ITRs) and FRs at the seedling stage (initiated FRs, IFRs). The role of miRNAs in the expansion of FRs was also explored using the sRNA transcriptome and degradome to identify miRNAs and their target genes that were differentially expressed between ITRs and FRs at the mature stage (unexpanded FRs, UFRs, which are unable to expand into ITRs). A total of 6032 genes and 450 proteins were differentially expressed between ITRs and IFRs. Integrated analyses of these data revealed several genes and proteins involved in light signalling, hormone response, and signal transduction that might participate in the induction of tuberous root formation. Several genes related to cell division and cell wall metabolism were involved in initiating the expansion of IFRs. Of 135 miRNAs differentially expressed between ITRs and UFRs, there were 27 miRNAs whose targets were specifically identified in the degradome. Analysis of target genes showed that several miRNAs specifically expressed in UFRs were involved in the degradation of key genes required for the formation of tuberous roots. As far as could be ascertained, this is the first time that the miRNAs that control the transition of FRs to tuberous roots in R. glutinosa have been identified. This comprehensive analysis of 'omics' data sheds new light on the mechanisms involved in the regulation of tuberous roots formation. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Initial and final estimates of the Bilinear seasonal time series model ...

African Journals Online (AJOL)

In getting the estimates of the parameters of this model special attention was paid to the problem of having good initial estimates as it is proposed that with good initial values of the parameters the estimates obtaining by the Newton-Raphson iterative technique usually not only converge but also are good estimates.

Crack embryo formation before crack initiation and growth in high temperature water

International Nuclear Information System (INIS)

Arioka, Koji; Yamada, Takuyo; Terachi, Takumi; Miyamoto, Tomoki

2008-01-01

Crack growth measurements were performed in high temperature water and in air to examine the role of creep on IGSCC growth using cold rolled non-sensitized Type316(UNS S31600), TT690 alloy, MA600 alloy, and Carbon steel (STPT42). In addition, crack initiation tests were performed also in high temperature water and in air using specially designed CT specimen. The obtained major results are as follows: (1) TT690 did crack in intergranularly in hydrogenated high temperature water if material is cold worked in heavily. (2) Cold worked carbon steel also cracked in intergranularly in dearated high temperature water. (3) Intergranular crack growth was recognized on cold worked 316, TT690, MA600, and carbon steel even in air which might be crack embryo of IGSCC. (4) Simple Arrhenius type temperature dependence was observed on IGSCC in high temperature water and creep crack growth in air. This suggested that intergranular crack growth rate was determined by some thermal activated reaction. (5) Vacancy condensation was recognized at just ahead of the crack tips of IGSCC and creep crack of cold worked steel. This showed that IGSCC and creep crack growth was controlled by same mechanism. (6) Clear evidence of vacancies condensation was recognized at just beneath the surface before crack initiation. This proved that crack did initiate as the result of diffusion of vacancies in the solid. And the incubation time seems to be controlled by the required time for the condensation of vacancies to the stress concentrated zone. (7) Diffusion of subsituational atoms was also driven by stress gradient. This is the important knowledge to evaluate the SCC initiation after long term operation in LWR's. Based on the observed results, IGSCC initiation and growth mechanism were proposed considering the diffusion process of cold worked induced vacancies. (author)

Allyl borates: a novel class of polyhomologation initiators

KAUST Repository

Wang, De

2016-12-24

Allyl borates, a new class of monofunctional polyhomologation initiators, are reported. These monofunctional initiators are less sensitive and more effective towards polymethylene-based architectures. As an example, the synthesis of α-vinyl-ω-hydroxypolymethylenes is given. By designing/synthesizing different allylic borate initiators, and using 1H and 11B NMR spectroscopy, the initiation mechanism was elucidated.

Horizons and non-local time evolution of quantum mechanical systems

International Nuclear Information System (INIS)

Casadio, Roberto

2015-01-01

According to general relativity, trapping surfaces and horizons are classical causal structures that arise in systems with sharply defined energy and corresponding gravitational radius. The latter concept can be extended to a quantum mechanical matter state simply by means of the spectral decomposition, which allows one to define an associated ''horizon wave-function''. Since this auxiliary wave-function contains crucial information about the causal structure of space-time, a new proposal is formulated for the time evolution of quantum systems in order to account for the fundamental classical property that outer observers cannot receive signals from inside a horizon. The simple case of a massive free particle at rest is used throughout the paper as a toy model to illustrate the main ideas. (orig.)

Initiation disruptor systems and methods of initiation disruption

Science.gov (United States)

Baum, Dennis W

2014-09-23

A system that may be used as an initiation disruption system (IDS) according to one embodiment includes an explosive charge; a plurality of particles in a layer at least partially surrounding the explosive charge; and a fire suppressant adjacent the plurality of particles. A method for disabling an object according to one embodiment includes placing the system as recited above near an object; and causing the explosive charge to initiate, thereby applying mechanical loading to the object such that the object becomes disabled. Additional systems and methods are also presented. A device according to another embodiment includes a plurality of particles bound by a binder thereby defining a sidewall having an interior for receiving an explosive; and a fire suppressant adjacent the plurality of particles and binder. Additional systems and methods are also presented.

Rotation stability of high speed neutron time-of-flight mechanical chopper

International Nuclear Information System (INIS)

Habib, N.; Adib, M.

1998-01-01

A modified rotation stabilization system has been designed to maintain the stability of a neutron time-of-flight (TOF) mechanical chopper rates from 460 rpm to 16000 rpm. The main principle of the system is based on comparing the chopper's rotation period with the preselected one from a quartz timer. The result of comparison is used to control the current driver of the chopper's motor. A 600 Hz three phase generator controlled by a magnetic amplifier was used as a current driver. The stability of the chopper's rotation rate at 16000 rpm was 0.02%. An improved method precise time scale calibration of the TOF spectrometer is applied

Non-canonical transcription initiation: the expanding universe of transcription initiating substrates.

Science.gov (United States)

Barvík, Ivan; Rejman, Dominik; Panova, Natalya; Šanderová, Hana; Krásný, Libor

2017-03-01

RNA polymerase (RNAP) is the central enzyme of transcription of the genetic information from DNA into RNA. RNAP recognizes four main substrates: ATP, CTP, GTP and UTP. Experimental evidence from the past several years suggests that, besides these four NTPs, other molecules can be used to initiate transcription: (i) ribooligonucleotides (nanoRNAs) and (ii) coenzymes such as NAD+, NADH, dephospho-CoA and FAD. The presence of these molecules at the 5΄ ends of RNAs affects the properties of the RNA. Here, we discuss the expanding portfolio of molecules that can initiate transcription, their mechanism of incorporation, effects on RNA and cellular processes, and we present an outlook toward other possible initiation substrates. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The aims of initiation ceremonies at universities: Comparisons in time and space1

Directory of Open Access Journals (Sweden)

N. S. Jansen van Rensburg

1990-03-01

Full Text Available In this article initiation practices at South African universities are analysed and compared with initiation ceremonies described in anthropological literature. It is argued that any initiation ceremony has at least the partial aim of preparing initiates for the roles and functions in society or specific organizations. Naturally a reasonable degree of harmony between the intent of initiation on the one hand and the values of an institution on the other hand can be expected. The intention of initiation usually is to prepare one for a position or rote by means of the expression of certain values. On the question whether this harmony between ideas and actions is found in the case of existent initiation ceremonies at South African universities, the answer is negative. These ceremonies do not aim to convey and develop attitudes and values essential to a university and in fact do not prepare first-year students for their new environment and a community of scholars. The way in which universities transcend their authority by condoning and officially allowing the demeaning initiation practices is also questioned.

A Review of the Factors Associated With the Timely Initiation of Breastfeeding and Exclusive Breastfeeding in the Middle East

Science.gov (United States)

Alzaheb, Riyadh A

2017-01-01

Background: Breastfeeding supplies all the nutrients that infants need for their healthy development. Breastfeeding practice is multifactorial, and numerous variables influence mothers’ decisions and ability to breastfeed. This review identifies the factors potentially affecting the timely initiation of breastfeeding within an hour after birth and exclusive breastfeeding in the first 6 months in Middle Eastern countries. Methods: The Medline, ScienceDirect, and Web of Science databases were keyword-searched for primary studies meeting the following inclusion criteria: (1) publication in the English language between January 2001 and May 2017, (2) original research articles reporting primary data on the factors influencing the timely initiation of breastfeeding and/or exclusive breastfeeding, (3) the use of World Health Organization definitions, and (4) Middle Eastern research contexts. A random effect model was used to establish the average prevalence of the timely initiation of breastfeeding and exclusive breastfeeding in the Middle East. Results: The review identified 19 studies conducted in Saudi Arabia (7), Iran (3), Egypt (2), Turkey (2), Kuwait (1), the United Arab Emirates (1), Qatar (1), Lebanon (1), and Syria (1). The meta-analysis established that 34.3% (confidence interval [CI]: 20.2%-51.9%) of Middle Eastern newborns received breastfeeding initiated within an hour of birth, and only 20.5% (CI: 14.5%-28.2%) were fed only breast milk for the first 6 months. The 8 studies exploring breastfeeding initiation most commonly associated it with the following: delivery mode, maternal employment, rooming-in, and prelacteal feeding. The 17 studies investigating exclusive breastfeeding most frequently linked it to the following: maternal age, maternal education, maternal employment, and delivery mode. Conclusions: Middle Eastern health care organizations should fully understand all the determinants of breastfeeding identified by this review to provide suitable

A Review of the Factors Associated With the Timely Initiation of Breastfeeding and Exclusive Breastfeeding in the Middle East

Directory of Open Access Journals (Sweden)

Riyadh A Alzaheb

2017-12-01

Full Text Available Background: Breastfeeding supplies all the nutrients that infants need for their healthy development. Breastfeeding practice is multifactorial, and numerous variables influence mothers’ decisions and ability to breastfeed. This review identifies the factors potentially affecting the timely initiation of breastfeeding within an hour after birth and exclusive breastfeeding in the first 6 months in Middle Eastern countries. Methods: The Medline, ScienceDirect, and Web of Science databases were keyword-searched for primary studies meeting the following inclusion criteria: (1 publication in the English language between January 2001 and May 2017, (2 original research articles reporting primary data on the factors influencing the timely initiation of breastfeeding and/or exclusive breastfeeding, (3 the use of World Health Organization definitions, and (4 Middle Eastern research contexts. A random effect model was used to establish the average prevalence of the timely initiation of breastfeeding and exclusive breastfeeding in the Middle East. Results: The review identified 19 studies conducted in Saudi Arabia (7, Iran (3, Egypt (2, Turkey (2, Kuwait (1, the United Arab Emirates (1, Qatar (1, Lebanon (1, and Syria (1. The meta-analysis established that 34.3% (confidence interval [CI]: 20.2%-51.9% of Middle Eastern newborns received breastfeeding initiated within an hour of birth, and only 20.5% (CI: 14.5%-28.2% were fed only breast milk for the first 6 months. The 8 studies exploring breastfeeding initiation most commonly associated it with the following: delivery mode, maternal employment, rooming-in, and prelacteal feeding. The 17 studies investigating exclusive breastfeeding most frequently linked it to the following: maternal age, maternal education, maternal employment, and delivery mode. Conclusions: Middle Eastern health care organizations should fully understand all the determinants of breastfeeding identified by this review to provide

An experimental and theoretical investigation of the mechanical behavior of multilayer initially curved microplates under electrostatic actuation

KAUST Repository

Saghir, Shahid

2017-04-07

We investigate the static and dynamic behavior of a multilayer clamped-free-clamped-free (CFCF) microplate, which is made of polyimide, gold, chromium, and nickel. The microplate is slightly curved away from a stationary electrode and is electrostatically actuated. The free and forced vibrations of the microplate are examined. First, we experimentally investigate the variation of the first natural frequency under the electrostatic DC load. Then, the forced dynamic behavior is investigated by applying a harmonic AC voltage superimposed to a DC voltage. Results are shown demonstrating the transition of the dynamic response of the microplate from hardening to softening as the DC voltage is changed as well the dynamic pull-in phenomenon. For theoretical model, we adopt a dynamic analog of the von-Karman governing equations accounting for initial curvature imperfection. These equations are then used to develop a reduced order model based on the Galerkin procedure to simulate the mechanical behavior of the microplate. We compare the theoretical results with experimental data and show excellent agreement among the results. We also examine the effect of the initial rise on the natural frequencies of first three symmetric-symmetric modes of the plate.

Autoregressive Prediction with Rolling Mechanism for Time Series Forecasting with Small Sample Size

Directory of Open Access Journals (Sweden)

Zhihua Wang

2014-01-01

Full Text Available Reasonable prediction makes significant practical sense to stochastic and unstable time series analysis with small or limited sample size. Motivated by the rolling idea in grey theory and the practical relevance of very short-term forecasting or 1-step-ahead prediction, a novel autoregressive (AR prediction approach with rolling mechanism is proposed. In the modeling procedure, a new developed AR equation, which can be used to model nonstationary time series, is constructed in each prediction step. Meanwhile, the data window, for the next step ahead forecasting, rolls on by adding the most recent derived prediction result while deleting the first value of the former used sample data set. This rolling mechanism is an efficient technique for its advantages of improved forecasting accuracy, applicability in the case of limited and unstable data situations, and requirement of little computational effort. The general performance, influence of sample size, nonlinearity dynamic mechanism, and significance of the observed trends, as well as innovation variance, are illustrated and verified with Monte Carlo simulations. The proposed methodology is then applied to several practical data sets, including multiple building settlement sequences and two economic series.

Control of Initiation of DNA Replication in Bacillus subtilis and Escherichia coli

Directory of Open Access Journals (Sweden)

Katie H. Jameson

2017-01-01

Full Text Available Initiation of DNA Replication is tightly regulated in all cells since imbalances in chromosomal copy number are deleterious and often lethal. In bacteria such as Bacillus subtilis and Escherichia coli, at the point of cytokinesis, there must be two complete copies of the chromosome to partition into the daughter cells following division at mid-cell during vegetative growth. Under conditions of rapid growth, when the time taken to replicate the chromosome exceeds the doubling time of the cells, there will be multiple initiations per cell cycle and daughter cells will inherit chromosomes that are already undergoing replication. In contrast, cells entering the sporulation pathway in B. subtilis can do so only during a short interval in the cell cycle when there are two, and only two, chromosomes per cell, one destined for the spore and one for the mother cell. Here, we briefly describe the overall process of DNA replication in bacteria before reviewing initiation of DNA replication in detail. The review covers DnaA-directed assembly of the replisome at oriC and the multitude of mechanisms of regulation of initiation, with a focus on the similarities and differences between E. coli and B. subtilis.

Control of Initiation of DNA Replication in Bacillus subtilis and Escherichia coli

Science.gov (United States)

Jameson, Katie H.; Wilkinson, Anthony J.

2017-01-01

Initiation of DNA Replication is tightly regulated in all cells since imbalances in chromosomal copy number are deleterious and often lethal. In bacteria such as Bacillus subtilis and Escherichia coli, at the point of cytokinesis, there must be two complete copies of the chromosome to partition into the daughter cells following division at mid-cell during vegetative growth. Under conditions of rapid growth, when the time taken to replicate the chromosome exceeds the doubling time of the cells, there will be multiple initiations per cell cycle and daughter cells will inherit chromosomes that are already undergoing replication. In contrast, cells entering the sporulation pathway in B. subtilis can do so only during a short interval in the cell cycle when there are two, and only two, chromosomes per cell, one destined for the spore and one for the mother cell. Here, we briefly describe the overall process of DNA replication in bacteria before reviewing initiation of DNA replication in detail. The review covers DnaA-directed assembly of the replisome at oriC and the multitude of mechanisms of regulation of initiation, with a focus on the similarities and differences between E. coli and B. subtilis. PMID:28075389

Speculations on the initiation of chromosome replication in Escherichia coli: the dualism hypothesis.

Science.gov (United States)

Norris, Vic

2011-05-01

The exact nature of the mechanism that triggers initiation of chromosome replication in the best understood of all organisms, Escherichia coli, remains mysterious. Here, I suggest that this mechanism evolved in response to the problems that arise if chromosome replication does not occur. E. coli is now known to be highly structured. This leads me to propose a mechanism for initiation of replication based on the dynamics of large assemblies of molecules and macromolecules termed hyperstructures. In this proposal, hyperstructures and their constituents are put into two classes, non-equilibrium and equilibrium, that spontaneously separate and that are appropriate for life in either good or bad conditions. Maintaining the right ratio(s) of non-equilibrium to equilibrium hyperstructures is therefore a major challenge for cells. I propose that this maintenance entails a major transfer of material from equilibrium to non-equilibrium hyperstructures once per cell and I further propose that this transfer times the cell cycle. More specifically, I speculate that the dialogue between hyperstructures involves the structuring of water and the condensation of cations and that one of the outcomes of ion condensation on ribosomal hyperstructures and decondensation from the origin hyperstructure is the separation of strands at oriC responsible for triggering initiation of replication. The dualism hypothesis that comes out of these speculations may help integrate models for initiation of replication, chromosome segregation and cell division with the 'prebiotic ecology' scenario of the origins of life. Copyright © 2011 Elsevier Ltd. All rights reserved.

Non-Vacuum Initial States for Cosmological Perturbations of Quantum-Mechanical Origin

CERN Document Server

Martín, J; Sakellariadou, M; Martin, Jerome; Riazuelo, Alain; Sakellariadou, Mairi

2000-01-01

In the context of inflation, non-vacuum initial states for cosmological perturbations that possess a built in scale are studied. It is demonstrated that this assumption leads to a falsifiable class of models. The question of whether they lead to conflicts with the available observations is addressed. For this purpose, the power spectrum of the Bardeen potential operator is calculated and compared with the CMBR anisotropies measurements and the redshift surveys of galaxies and clusters of galaxies. Generic predictions of the model are: a high first acoustic peak, the presence of a bump in the matter power spectrum and non-Gaussian statistics. The details are controlled by the number of quanta in the non-vacuum initial state. Comparisons with observations show that there exists a window for the free parameters such that good agreement between the data and the theoretical predictions is possible. However, in the case where the initial state is a state with a fixed number of quanta, it is shown that this number c...

Hard and soft sub-time-optimal controllers for a mechanical system with uncertain mass

DEFF Research Database (Denmark)

Kulczycki, P.; Wisniewski, Rafal; Kowalski, P.

2004-01-01

An essential limitation in using the classical optimal control has been its limited robustness to modeling inadequacies and perturbations. This paper presents conceptions of two practical control structures based on the time-optimal approach: hard and soft ones. The hard structure is defined...... by parameters selected in accordance with the rules of the statistical decision theory; however, the soft structure allows additionally to eliminate rapid changes in control values. The object is a basic mechanical system, with uncertain (also non-stationary) mass treated as a stochastic process....... The methodology proposed here is of a universal nature and may easily be applied with respect to other elements of uncertainty of time-optimal controlled mechanical systems....

Hard and soft Sub-Time-Optimal Controllers for a Mechanical System with Uncertain Mass

DEFF Research Database (Denmark)

Kulczycki, P.; Wisniewski, Rafal; Kowalski, P.

2005-01-01

An essential limitation in using the classical optimal control has been its limited robustness to modeling inadequacies and perturbations. This paper presents conceptions of two practical control structures based on the time-optimal approach: hard and soft ones. The hard structure is defined...... by parameters selected in accordance with the rules of the statistical decision theory; however, the soft structure allows additionally to eliminate rapid changes in control values. The object is a basic mechanical system, with uncertain (also non-stationary) mass treated as a stochastic process....... The methodology proposed here is of a universal nature and may easily be applied with respect to other elements of uncertainty of time-optimal controlled mechanical systems....

Impact of Interlayer Dwell Time on Microstructure and Mechanical Properties of Nickel and Titanium Alloys

Science.gov (United States)

Foster, B. K.; Beese, A. M.; Keist, J. S.; McHale, E. T.; Palmer, T. A.

2017-09-01

Path planning in additive manufacturing (AM) processes has an impact on the thermal histories experienced at discrete locations in simple and complex AM structures. One component of path planning in directed energy deposition is the time required for the laser or heat source to return to a given location to add another layer of material. As structures become larger and more complex, the length of this interlayer dwell time can significantly impact the resulting thermal histories. The impact of varying dwell times between 0 and 40 seconds on the microstructural and mechanical properties of Inconel® 625 and Ti-6Al-4V builds has been characterized. Even though these materials display different microstructures and solid-state phase transformations, the addition of an interlayer dwell generally led to a finer microstructure in both materials that impacted the resulting mechanical properties. With the addition of interlayer dwell times up to 40 seconds in the Inconel® 625 builds, finer secondary dendrite arm spacing values, produced by changes in the thermal history, correspond to increased yield and tensile strengths. These mechanical properties did not appear to change significantly, however, for dwell times greater than 20 seconds in the Inconel® 625 builds, indicating that longer dwell times have a minimal impact. The addition of interlayer dwell times in Ti-6Al-4V builds resulted in a slight decrease in the measured alpha lath widths and a much more noticeable decrease in the width of prior beta grains. In addition, the yield and tensile values continued to increase, nearly reaching the values observed in the rolled plate substrate material with dwell times up to 40 seconds.

Study on a new type variable valve lift timing mechanism with a three dimensional cam; Sanjigen cam ni yoru shinkahen valve lift timing kiko ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Ogura, M; Song, C [Nippon Institute of Technology, Saitama (Japan)

1997-10-01

The variable valve timing mechanism was invented to get a torque band at wide engine speed, and to reduce a compression job and pumping loss by a miler cycle at partial load. In this paper, the new type variable valve timing mechanism applying a three dimensional cam was proposed. Also, the feature of mechanism and the control system was done obviously. Further, about a miler cycle, a thermodynamics -like consideration was described. 5 refs., 8 figs.

Analytical Method to Estimate Fatigue Life Time Duration in Service for Runner Blade Mechanism of Kaplan Turbines

Directory of Open Access Journals (Sweden)

Ana – Maria Budai

2010-10-01

Full Text Available The paper present an analytical method that can be used to determianted fatigue life time duration in service for runner blade mechanism of Kaplan turbines. The study was made for lever button of runer blade mechanism using two analytical relation to calculate the maximum number of stress cycles whereupon the mechanism work without any damage. To estimate fatigue life time duration will be used a formula obtained from one of most comon cumulative damage methodology taking in consideration the real exploatation conditions of a specified Kapaln turbine.

Atmospheric Oxidation Mechanism and Kinetic Studies for OH and NO3 Radical-Initiated Reaction of Methyl Methacrylate

Directory of Open Access Journals (Sweden)

Rui Gao

2014-03-01

Full Text Available The mechanism for OH and NO3 radical-initiated oxidation reactions of methyl methacrylate (MMA was investigated by using density functional theory (DFT molecular orbital theory. Geometrical parameters of the reactants, intermediates, transition states, and products were fully optimized at the B3LYP/6-31G(d,p level. Detailed oxidation pathways were presented and discussed. The rate constants were deduced by the canonical variational transition-state (CVT theory with the small-curvature tunneling (SCT correction and the multichannel Rice-Ramspergere-Kassele-Marcus (RRKM theory, based on the potential energy surface profiles over the general atmospheric temperature range of 180–370 K. The calculated results were in reasonable agreement with experimental measurement.

Vadose zone process that control landslide initiation and debris flow propagation

Science.gov (United States)

Sidle, Roy C.

2015-04-01

Advances in the areas of geotechnical engineering, hydrology, mineralogy, geomorphology, geology, and biology have individually advanced our understanding of factors affecting slope stability; however, the interactions among these processes and attributes as they affect the initiation and propagation of landslides and debris flows are not well understood. Here the importance of interactive vadose zone processes is emphasized related to the mechanisms, initiation, mode, and timing of rainfall-initiated landslides that are triggered by positive pore water accretion, loss of soil suction and increase in overburden weight, and long-term cumulative rain water infiltration. Both large- and small-scale preferential flow pathways can both contribute to and mitigate instability, by respectively concentrating and dispersing subsurface flow. These mechanisms are influenced by soil structure, lithology, landforms, and biota. Conditions conducive to landslide initiation by infiltration versus exfiltration are discussed relative to bedrock structure and joints. The effects of rhizosphere processes on slope stability are examined, including root reinforcement of soil mantles, evapotranspiration, and how root structures affect preferential flow paths. At a larger scale, the nexus between hillslope landslides and in-channel debris flows is examined with emphasis on understanding the timing of debris flows relative to chronic and episodic infilling processes, as well as the episodic nature of large rainfall and related stormflow generation in headwater streams. The hydrogeomorphic processes and conditions that determine whether or not landslides immediately mobilize into debris flows is important for predicting the timing and extent of devastating debris flow runout in steep terrain. Given the spatial footprint of individual landslides, it is necessary to assess vadose zone processes at appropriate scales to ascertain impacts on mass wasting phenomena. Articulating the appropriate

On the definition of the time evolution operator for time-independent Hamiltonians in non-relativistic quantum mechanics

Science.gov (United States)

Amaku, Marcos; Coutinho, Francisco A. B.; Masafumi Toyama, F.

2017-09-01

The usual definition of the time evolution operator e-i H t /ℏ=∑n=0∞1/n ! (-i/ℏHt ) n , where H is the Hamiltonian of the system, as given in almost every book on quantum mechanics, causes problems in some situations. The operators that appear in quantum mechanics are either bounded or unbounded. Unbounded operators are not defined for all the vectors (wave functions) of the Hilbert space of the system; when applied to some states, they give a non-normalizable state. Therefore, if H is an unbounded operator, the definition in terms of the power series expansion does not make sense because it may diverge or result in a non-normalizable wave function. In this article, we explain why this is so and suggest, as an alternative, another definition used by mathematicians.

Lightning-Discharge Initiation as a Noise-Induced Kinetic Transition

Science.gov (United States)

Iudin, D. I.

2017-10-01

The electric fields observed in thunderclouds have the peak values one order of magnitude smaller than the electric strength of air. This fact renders the issue of the lightning-discharge initiation one of the most intriguing problems of thunderstorm electricity. In this work, the lightning initiation in a thundercloud is considered as a noise-induced kinetic transition. The stochastic electric field of the charged hydrometeors is the noise source. The considered kinetic transition has some features which distinguish it from other lightning-initiation mechanisms. First, the dynamic realization of this transition, which is due to interaction of the electron and ion components, is extended for a time significantly exceeding the spark-discharge development time. In this case, the fast attachment of electrons generated by supercritical bursts of the electric field of hydrometeors is balanced during long-term time intervals by the electron-release processes when the negative ions are destroyed. Second, an important role in the transition kinetics is played by the stochastic drift of electrons and ions caused by the small-scale fluctuations of the field of charged hydrometeors. From the formal mathematical viewpoint, this stochastic drift is indistinguishable from the scalar-impurity advection in a turbulent flow. In this work, it is shown that the efficiency of "advective mixing" is several orders of magnitude greater than that of the ordinary diffusion. Third, the considered transition leads to a sharp increase in the conductivity in the exponentially rare compact regions of space against the background of the vanishingly small variations in the average conductivity of the medium. In turn, the spots with increased conductivity are polarized in the mean field followed by the streamer initiation and discharge contraction.

Effect of milling time on the structure, micro-hardness, and thermal behavior of amorphous/nanocrystalline TiNiCu shape memory alloys developed by mechanical alloying

International Nuclear Information System (INIS)

Alijani, Fatemeh; Amini, Rasool; Ghaffari, Mohammad; Alizadeh, Morteza; Okyay, Ali Kemal

2014-01-01

Highlights: • Potential to produce B1′ (thermal- and stress-induced) and B2 was established. • Martensitic transformation occurred without the formation of intermediate R-phase. • Formation of unwanted intermetallics during heating was hindered by milling. • During milling, microhardness was increased, then reduced, and afterward re-increased. • By milling evolution, thermal crystallization steps changed from 3 to 2. - Abstract: In the present paper, the effect of milling process on the chemical composition, structure, microhardness, and thermal behavior of Ti–41Ni–9Cu compounds developed by mechanical alloying was evaluated. The structural characteristic of the alloyed powders was evaluated by X-ray diffraction (XRD). The chemical composition homogeneity and the powder morphology and size were studied by scanning electron microscopy coupled with electron dispersive X-ray spectroscopy. Moreover, the Vickers micro-indentation hardness of the powders milled for different milling times was determined. Finally, the thermal behavior of the as-milled powders was studied by differential scanning calorimetery. According to the results, at the initial stages of milling (typically 0–12 h), the structure consisted of a Ni solid solution and amorphous phase, and by the milling evolution, nanocrystalline martensite (B19′) and austenite (B2) phases were initially formed from the initial materials and then from the amorphous phase. It was found that by the milling development, the composition uniformity is increased, the inter-layer thickness is reduced, and the powders microhardness is initially increased, then reduced, and afterward re-increased. It was also realized that the thermal behavior of the alloyed powders and the structure of heat treated samples is considerably affected by the milling time

Study of n-Butyl Acrylate Self-Initiation Reaction Experimentally and via Macroscopic Mechanistic Modeling

Directory of Open Access Journals (Sweden)

Ahmad Arabi Shamsabadi

2016-04-01

Full Text Available This paper presents an experimental study of the self-initiation reaction of n-butyl acrylate (n-BA in free-radical polymerization. For the first time, the frequency factor and activation energy of the monomer self-initiation reaction are estimated from measurements of n-BA conversion in free-radical homo-polymerization initiated only by the monomer. The estimation was carried out using a macroscopic mechanistic mathematical model of the reactor. In addition to already-known reactions that contribute to the polymerization, the model considers a n-BA self-initiation reaction mechanism that is based on our previous electronic-level first-principles theoretical study of the self-initiation reaction. Reaction rate equations are derived using the method of moments. The reaction-rate parameter estimates obtained from conversion measurements agree well with estimates obtained via our purely-theoretical quantum chemical calculations.

Characterizing time-dependent mechanics in metallic MEMS

Directory of Open Access Journals (Sweden)

Geers M.G.D.

2010-06-01

Full Text Available Experiments for characterization of time-dependent material properties in free-standing metallic microelectromechanical system (MEMS pose challenges: e.g. fabrication and handling (sub-μm sized specimens, control and measurement of sub-μN loads and sub-μm displacements over long periods and various temperatures [1]. A variety of experimental setups have been reported each having their pros and cons. One example is a micro-tensile tester with an ingenious electro-static specimen gripping system [2] aiding simple specimen design giving good results at μN and sub-μm levels, but without in-situ full-field observations. Other progressive examples assimilate the specimen, MEMS actuators and load cells on a single chip [3,4] yielding significant results at nN and nm levels with in-situ TEM/SEM observability, though not without complications: complex load actuator/sensor calibration per chip, measures to reduce fabrication failure and unfeasible cofabrication on wafers with commercial metallic MEMS. This work aims to overcome these drawbacks by developing experimental methods with high sensitivity, precision and in-situ full-field observation capabilities. Moreover, these should be applicable to simple free-standing metallic MEMS that can be co-fabricated with commercial devices. These methods will then serve in systematic studies into size-effects in time-dependent material properties. First a numeric-experimental method is developed. It characterizes bending deformation of onwafer μm-sized aluminum cantilevers. A specially designed micro-clamp is used to mechanically apply a constant precise deflection of the beam (zres <50 nm for a prolonged period, see fig. 1. After this period, the deflection by the micro-clamp is removed. Full-field height maps with the ensuing deformation are measured over time with confocal optical profilometry (COP. This yields the tip deflection as function of time with ~3 nm precision, see fig.2. To extract material

Initial Study

DEFF Research Database (Denmark)

Torp, Kristian

2009-01-01

increased. In the initial study presented here, the time it takes to pass an intersection is studied in details. Two major signal-controlled four-way intersections in the center of the city Aalborg are studied in details to estimate the congestion levels in these intersections, based on the time it takes...

Characterization of fibrillation process of α-synuclein at the initial stage

International Nuclear Information System (INIS)

Tashiro, Mitsuru; Kojima, Masaki; Kihara, Hiroshi; Kasai, Kouki; Kamiyoshihara, Tomoaki; Ueda, Kenji; Shimotakahara, Sakurako

2008-01-01

α-Synuclein is the major component of the filamentous Lewy bodies and Lewy-related neurites, neuropathological hallmarks of Parkinson's disease. Although numerous studies on α-synuclein fibrillation have been reported, the molecular mechanisms of aggregation and fibrillation at the initial stage are still unclear. In the present study, structural properties and propensities to form fibrils of α-synuclein at the initial stage were investigated using 2D 1 H- 15 N NMR spectroscopy, electron microscope, and small angle X-ray scattering (SAXS). Observation of the 2D 1 H- 15 N HSQC spectra indicated significant attenuation of many cross peak intensities in the regions of KTKEGV-type repeats and the non-Aβ component of Alzheimer's disease amyloid (NAC), suggesting that these regions contributed fibril formation. Oligomerization comprising heptamer was successfully monitored at the initial stage using the time-dependent SAXS measurements

From Discrete Space-Time to Minkowski Space: Basic Mechanisms, Methods and Perspectives

Science.gov (United States)

Finster, Felix

This survey article reviews recent results on fermion systems in discrete space-time and corresponding systems in Minkowski space. After a basic introduction to the discrete setting, we explain a mechanism of spontaneous symmetry breaking which leads to the emergence of a discrete causal structure. As methods to study the transition between discrete space-time and Minkowski space, we describe a lattice model for a static and isotropic space-time, outline the analysis of regularization tails of vacuum Dirac sea configurations, and introduce a Lorentz invariant action for the masses of the Dirac seas. We mention the method of the continuum limit, which allows to analyze interacting systems. Open problems are discussed.

Breastfeeding Initiation and Duration in First-Time Mothers: Exploring the Impact of Father Involvement in the Early Post-Partum Period

Directory of Open Access Journals (Sweden)

Theresa Hunter

2014-12-01

Full Text Available Background: The early post-partum period is a crucial time for breastfeeding support. Mothers who have physical and emotional support during this period are more likely to be successful in breastfeeding. This study examined the relationship between father involvement and support for breast feeding initiation and duration in first-time mothers. Methods: Overall, 146 women who attended a childbirth education class or breastfeeding course at BABS were asked to fill out the Childbirth Experiences Survey, which explored key topics such as (1 breastfeeding initiation, (2 early post-partum breastfeeding, (3 breastfeeding plan, (4 post-partum breastfeeding support and (5 breast feeding duration. This was a voluntary self-reported questionnaire. The surveys were completed by the mothers during the post-partum period. Results: 45.9% (n=67 of mothers received helped from their husband or partner with breastfeeding while in the hospital, while 54.1% (n=79 of mothers did not receive support from their partners. Mothers who received early post-partum breastfeeding support were more likely to continue breastfeeding after leaving the hospital. Conclusion: First-time mothers who identified as having breastfeeding support from their partners, the infant’s father, during the early post-partum period were more likely to initiate breastfeeding and had longer breastfeeding durations.

Collecting response times using Amazon Mechanical Turk and Adobe Flash.

Science.gov (United States)

Simcox, Travis; Fiez, Julie A

2014-03-01

Crowdsourcing systems like Amazon's Mechanical Turk (AMT) allow data to be collected from a large sample of people in a short amount of time. This use has garnered considerable interest from behavioral scientists. So far, most experiments conducted on AMT have focused on survey-type instruments because of difficulties inherent in running many experimental paradigms over the Internet. This study investigated the viability of presenting stimuli and collecting response times using Adobe Flash to run ActionScript 3 code in conjunction with AMT. First, the timing properties of Adobe Flash were investigated using a phototransistor and two desktop computers running under several conditions mimicking those that may be present in research using AMT. This experiment revealed some strengths and weaknesses of the timing capabilities of this method. Next, a flanker task and a lexical decision task implemented in Adobe Flash were administered to participants recruited with AMT. The expected effects in these tasks were replicated. Power analyses were conducted to describe the number of participants needed to replicate these effects. A questionnaire was used to investigate previously undescribed computer use habits of 100 participants on AMT. We conclude that a Flash program in conjunction with AMT can be successfully used for running many experimental paradigms that rely on response times, although experimenters must understand the limitations of the method.

Time-symmetric initial data for binary black holes in numerical relativity

International Nuclear Information System (INIS)

Blanchet, Luc

2003-01-01

We look for physically realistic initial data in numerical relativity which are in agreement with post-Newtonian approximations. We propose a particular solution of the time-symmetric constraint equation, appropriate to two momentarily static black holes, in the form of a conformal decomposition of the spatial metric. This solution is isometric to the post-Newtonian (PN) metric up to the 2PN order. It represents a nonlinear deformation of the solution of Brill and Lindquist, i.e. an asymptotically flat region is connected to two asymptotically flat (in a certain weak sense) sheets that are the images of the two singularities through appropriate inversion transformations. The total Arnowitt-Deser-Misner mass M as well as the individual masses m 1 and m 2 (when they exist) are computed by surface integrals performed at infinity. Using second order perturbation theory on the Brill-Lindquist background, we prove that the binary's interacting mass-energy M-m 1 -m 2 is well defined at the 2PN order and in agreement with the known post-Newtonian result

Impact of Vestibular Lesions on Allocentric Navigation and Interval Timing: The Role of Self-Initiated Motion in Spatial-Temporal Integration

Czech Academy of Sciences Publication Activity Database

Dallal, N. L.; Yin, B.; Nekovářová, Tereza; Stuchlík, Aleš; Meck, W. H.

2015-01-01

Roč. 3, 3-4 (2015), s. 269-305 ISSN 2213-445X R&D Projects: GA MŠk(CZ) LH14053 Institutional support: RVO:67985823 Keywords : peak-interval procedure * interval timing * radial-arm maze * magnitude representation * dorsolateral striatum * self-initiated movement * hippocampus * cerebellum * time perception * allocentric navigation Subject RIV: FH - Neurology

Experimental Study on Mechanical and Acoustic Emission Characteristics of Rock-Like Material Under Non-uniformly Distributed Loads

Science.gov (United States)

Wang, Xiao; Wen, Zhijie; Jiang, Yujing; Huang, Hao

2018-03-01

The mechanical and acoustic emission characteristics of rock-like materials under non-uniform loads were investigated by means of a self-developed mining-induced stress testing system and acoustic emission monitoring system. In the experiments, the specimens were divided into three regions and different initial vertical stresses and stress loading rates were used to simulate different mining conditions. The mechanical and acoustic emission characteristics between regions were compared, and the effects of different initial vertical stresses and different stress loading rates were analysed. The results showed that the mechanical properties and acoustic emission characteristics of rock-like materials can be notably localized. When the initial vertical stress and stress loading rate are fixed, the peak strength of region B is approximately two times that of region A, and the maximum acoustic emission hit value of region A is approximately 1-2 times that of region B. The effects of the initial vertical stress and stress loading rate on the peck strain, maximum hit value, and occurrence time of the maximum hit are similar in that when either of the former increase, the latter all decrease. However, peck strength will increase with the increase in loading rate and decrease with the increase in initial vertical stress. The acoustic emission hits can be used to analyse the damage in rock material, but the number of acoustic emission hits cannot be used alone to determine the degree of rock damage directly.

Extending a real-time operating system with a mechanism for criticality-level changes

NARCIS (Netherlands)

Gupta, T.

2015-01-01

Systems robustness, cost reduction and certification play an important role in the automotive domain. If there is a fault, e.g. task overshooting its allocated execution time, sufficient mechanisms should be available to safeguard the system against those. Applications of different criticalities

Variational data assimilation for the optimized ozone initial state and the short-time forecasting

Directory of Open Access Journals (Sweden)

S.-Y. Park

2016-03-01

Full Text Available In this study, we apply the four-dimensional variational (4D-Var data assimilation to optimize initial ozone state and to improve the predictability of air quality. The numerical modeling systems used for simulations of atmospheric condition and chemical formation are the Weather Research and Forecasting (WRF model and the Community Multiscale Air Quality (CMAQ model. The study area covers the capital region of South Korea, where the surface measurement sites are relatively evenly distributed. The 4D-Var code previously developed for the CMAQ model is modified to consider background error in matrix form, and various numerical tests are conducted. The results are evaluated with an idealized covariance function for the appropriateness of the modified codes. The background error is then constructed using the NMC method with long-term modeling results, and the characteristics of the spatial correlation scale related to local circulation are analyzed. The background error is applied in the 4D-Var research, and a surface observational assimilation is conducted to optimize the initial concentration of ozone. The statistical results for the 12 h assimilation periods and the 120 observatory sites show a 49.4 % decrease in the root mean squared error (RMSE, and a 59.9 % increase in the index of agreement (IOA. The temporal variation of spatial distribution of the analysis increments indicates that the optimized initial state of ozone concentration is transported to inland areas by the clockwise-rotating local circulation during the assimilation windows. To investigate the predictability of ozone concentration after the assimilation window, a short-time forecasting is carried out. The ratios of the RMSE (root mean squared error with assimilation versus that without assimilation are 8 and 13 % for the +24 and +12 h, respectively. Such a significant improvement in the forecast accuracy is obtained solely by using the optimized initial state. The potential

Fabrication of thin SU-8 cantilevers: initial bending, release and time stability

DEFF Research Database (Denmark)

Keller, Stephan Urs; Haefliger, D.; Boisen, Anja

2010-01-01

SU-8 cantilevers with a thickness of 2 mu m were fabricated using a dry release method and two steps of SU-8 photolithography. The processing of the thin SU-8 film defining the cantilevers was experimentally optimized to achieve low initial bending due to residual stress gradients. In parallel......, the rotational deformation at the clamping point allowed a qualitative assessment of the device release from the fluorocarbon-coated substrate. The change of these parameters during several months of storage at ambient temperature was investigated in detail. The introduction of a long hard bake in an oven after...... development of the thin SU-8 film resulted in reduced cantilever bending due to removal of residual stress gradients. Further, improved time-stability of the devices was achieved due to the enhanced cross-linking of the polymer. A post-exposure bake at a temperature T-PEB = 50 degrees C followed by a hard...

Out-of pile mechanical test: simulating reactivity initiated accident (RIA) of zircaloy-4 cladding tube

Energy Technology Data Exchange (ETDEWEB)

Lee, Myung Ho; Kim, Jun Hwan; Choi, Byoung Kwon; Jeong, Young Hwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2004-07-01

The ejection or drop of a control rod in a reactivity initiated accident (RIA) causes a sudden increase in reactor power and in turn deposits a large amount of energy into the fuel. In a RIA, cladding tubes bear thermal expansion due to sudden reactivity and may fail from the resulting mechanical damage. Thus, RIA can be one of the safety margin reducers because the oxide on the tubes makes their thickness to support the load less as well as hydrides from the corrosion reduce the ductility of the tubes. In a RIA, the peak of reactor power from reactivity change is about 0.1m second and the temperature of the cladding tubes increases up to 1000 .deg. C in several seconds. Although it is hard to fully simulate the situation, several attempts to measure the change of mechanical properties under a RIA situation has done using a reduction coil, ring tension tests with high speed. This research was done to see the effect of oxide on the change of circumferential strength and ductility of Zircaloy-4 tubes in a RIA. The ring stretch tensile tests were performed with the strain rate of 1/sec and 0.01/s to simulate a transient of the cladding tube under a RIA. Since the test results of the ring tensile test are very sensitive to the lubricant, the tests were also carried out to select a suitable lubricant before the test of oxided specimens.

Attention: Reaction Time and Accuracy Reveal Different Mechanisms

Science.gov (United States)

Prinzmetal, William; McCool, Christin; Park, Samuel

2005-01-01

The authors propose that there are 2 different mechanisms whereby spatial cues capture attention. The voluntary mechanism is the strategic allocation of perceptual resources to the location most likely to contain the target. The involuntary mechanism is a reflexive orienting response that occurs even when the spatial cue does not indicate the…

Spinorial space-time and the origin of Quantum Mechanics. The dynamical role of the physical vacuum

International Nuclear Information System (INIS)

Gonzalez-Mestres, Luis

2016-01-01

Is Quantum Mechanics really and ultimate principle of Physics described by a set of intrinsic exact laws? Are standard particles the ultimate constituents of matter? The two questions appear to be closely related, as a preonic structure of the physical vacuum would have an influence on the properties of quantum particles. Although the first preon models were just « quark-like » and assumed preons to be direct constituents of the conventional « elementary » particles, we suggested in 1995 that preons could instead be constituents of the physical vacuum (the superbradyon hypothesis). Standard particles would then be excitations of the preonic vacuum and have substantially different properties from those of preons themselves (critical speed…). The standard laws of Particle Physics would be approximate expressions generated from basic preon dynamics. In parallel, the mathematical properties of space-time structures such as the spinoral space-time (SST) we introduced in 1996-97 can have strong implications for Quantum Mechanics and even be its real origin. We complete here our recent discussion of the subject by pointing out that: i) Quantum Mechanics corresponds to a natural set of properties of vacuum excitations in the presence of a SST geometry ; ii) the recently observed entanglement at long distances would be a logical property if preons are superluminal (superbradyons), so that superluminal signals and correlations can propagate in vacuum ; iii) in a specific description, the function of space-time associated to the extended internal structure of a spin-1/2 particle at very small distances may be incompatible with a continuous motion at space and time scales where the internal structure of vacuum can be felt. In the dynamics associated to iii), and using the SST approach to space-time, a contradiction can appear between macroscopic and microscopic space-times due to an overlap in the time variable directly related to the fact that a spinorial function takes

The differences in delay times for air showers initiated by 100 TeV gamma rays and protons

International Nuclear Information System (INIS)

Mikocki, S.; Poirier, J.; Linsley, J.; Consiglio Nazionale delle Ricerche, Palermo; Wrotniak, A.; Maryland Univ., College Park

1987-01-01

The purpose of this study is to investigate whether there are any differences in the time delay distributions between showers initiated by gamma rays and by protons. The results of Monte Carlo calculations of atmospheric showers initiated by gamma rays and protons at an energy of 100 TeV show systematic differences. These differences are negligible at small distances from the core of the showers; at larger distances the effects become large. However, at large distances the particle densities are small at an energy of 100 TeV and the subsequent statistical fluctuations would make an identification of gamma-ray showers unreliable. However, these large effects should be included in corrections for the curvature of gamma-ray and proton shower fronts. (author)

Predicting Reactive Transport Dynamics in Carbonates using Initial Pore Structure

Science.gov (United States)

Menke, H. P.; Nunes, J. P. P.; Blunt, M. J.

2017-12-01

Understanding rock-fluid interaction at the pore-scale is imperative for accurate predictive modelling of carbon storage permanence. However, coupled reactive transport models are computationally expensive, requiring either a sacrifice of resolution or high performance computing to solve relatively simple geometries. Many recent studies indicate that initial pore structure many be the dominant mechanism in determining the dissolution regime. Here we investigate how well the initial pore structure is predictive of distribution and amount of dissolution during reactive flow using particle tracking on the initial image. Two samples of carbonate rock with varying initial pore space heterogeneity were reacted with reservoir condition CO2-saturated brine and scanned dynamically during reactive flow at a 4-μm resolution between 4 and 40 times using 4D X-ray micro-tomography over the course of 1.5 hours using μ-CT. Flow was modelled on the initial binarized image using a Navier-Stokes solver. Particle tracking was then run on the velocity fields, the streamlines were traced, and the streamline density was calculated both on a voxel-by-voxel and a channel-by-channel basis. The density of streamlines was then compared to the amount of dissolution in subsequent time steps during reaction. It was found that for the flow and transport regimes studied, the streamline density distribution in the initial image accurately predicted the dominant pathways of dissolution and gave good indicators of the type of dissolution regime that would later develop. This work suggests that the eventual reaction-induced changes in pore structure are deterministic rather than stochastic and can be predicted with high resolution imaging of unreacted rock.

Statistical mechanics of cellular automata

International Nuclear Information System (INIS)

Wolfram, S.

1983-01-01

Cellular automata are used as simple mathematical models to investigate self-organization in statistical mechanics. A detailed analysis is given of ''elementary'' cellular automata consisting of a sequence of sites with values 0 or 1 on a line, with each site evolving deterministically in discrete time steps according to p definite rules involving the values of its nearest neighbors. With simple initial configurations, the cellular automata either tend to homogeneous states, or generate self-similar patterns with fractal dimensions approx. =1.59 or approx. =1.69. With ''random'' initial configurations, the irreversible character of the cellular automaton evolution leads to several self-organization phenomena. Statistical properties of the structures generated are found to lie in two universality classes, independent of the details of the initial state or the cellular automaton rules. More complicated cellular automata are briefly considered, and connections with dynamical systems theory and the formal theory of computation are discussed

Hydraulic mechanism and time-dependent characteristics of loose gully deposits failure induced by rainfall

Directory of Open Access Journals (Sweden)

Yong Wu

2015-12-01

Full Text Available Failure of loose gully deposits under the effect of rainfall contributes to the potential risk of debris flow. In the past decades, researches on hydraulic mechanism and time-dependent characteristics of loose deposits failure are frequently reported, however adequate measures for reducing debris flow are not available practically. In this context, a time-dependent model was established to determine the changes of water table of loose deposits using hydraulic and topographic theories. In addition, the variation in water table with elapsed time was analyzed. The formulas for calculating hydrodynamic and hydrostatic pressures on each strip and block unit of deposit were proposed, and the slope stability and failure risk of the loose deposits were assessed based on the time-dependent hydraulic characteristics of established model. Finally, the failure mechanism of deposits based on infinite slope theory was illustrated, with an example, to calculate sliding force, anti-sliding force and residual sliding force applied to each slice. The results indicate that failure of gully deposits under the effect of rainfall is the result of continuously increasing hydraulic pressure and water table. The time-dependent characteristics of loose deposit failure are determined by the factors of hydraulic properties, drainage area of interest, rainfall pattern, rainfall duration and intensity.

Movement initiation in groups of feral horses

NARCIS (Netherlands)

Krueger, Konstanze; Flauger, Birgit; Farmer, Kate; Hemelrijk, Charlotte

Herds of ungulates, flocks of birds, swarms of insects and schools of fish move in coordinated groups. Computer models show that only one or very few animals are needed to initiate and direct movement. To investigate initiation mechanisms further, we studied two ways in which movement can be

U-curve association between timing of renal replacement therapy initiation and in-hospital mortality in postoperative acute kidney injury.

Directory of Open Access Journals (Sweden)

Chih-Chung Shiao

Full Text Available BACKGROUND: Postoperative acute kidney injury (AKI is associated with poor outcomes in surgical patients. This study aims to evaluate whether the timing of renal replacement therapy (RRT initiation affects the in-hospital mortality of patients with postoperative AKI. METHODOLOGY: This multicenter retrospective observational study, which was conducted in the intensive care units (ICUs in a tertiary hospital (National Taiwan University Hospital and its branch hospitals in Taiwan between January, 2002, and April, 2009, included adult patients with postoperative AKI who underwent RRT for predefined indications. The demographic data, comorbid diseases, types of surgery and RRT, and the indications for RRT were documented. Patients were categorized according to the period of time between the ICU admission and RRT initiation as the early (EG, ≦1 day, intermediate (IG, 2-3 days, and late (LG, ≧4 days groups. The in-hospital mortality rate censored at 180 day was defined as the endpoint. RESULTS: Six hundred forty-eight patients (418 men, mean age 63.0±15.9 years were enrolled, and 379 patients (58.5% died during the hospitalization. Both the estimated probability of death and the in-hospital mortality rates of the three groups represented U-curves. According to the Cox proportional hazard method, LG (hazard ratio, 1.527; 95% confidence interval, 1.152-2.024; P = 0.003, compared with IG group, age (1.014; 1.006-1.021, diabetes (1.279; 1.022-1.601; P = 0.031, cirrhosis (2.147; 1.421-3.242, extracorporeal membrane oxygenation support (1.811; 1.391-2.359, initial neurological dysfunction (1.448; 1.107-1.894; P = 0.007, pre-RRT mean arterial pressure (0.988; 0.981-0.995, inotropic equivalent (1.006; 1.001-1.012; P = 0.013, APACHE II scores (1.055; 1.037-1.073, and sepsis (1.939; 1.536-2.449 were independent predictors of the in-hospital mortality (All P<0.001 except otherwise stated. CONCLUSIONS: The current study found a U

Initiation of DNA replication: functional and evolutionary aspects

Science.gov (United States)

Bryant, John A.; Aves, Stephen J.

2011-01-01

Background The initiation of DNA replication is a very important and highly regulated step in the cell division cycle. It is of interest to compare different groups of eukaryotic organisms (a) to identify the essential molecular events that occur in all eukaryotes, (b) to start to identify higher-level regulatory mechanisms that are specific to particular groups and (c) to gain insights into the evolution of initiation mechanisms. Scope This review features a wide-ranging literature survey covering replication origins, origin recognition and usage, modification of origin usage (especially in response to plant hormones), assembly of the pre-replication complex, loading of the replisome, genomics, and the likely origin of these mechanisms and proteins in Archaea. Conclusions In all eukaryotes, chromatin is organized for DNA replication as multiple replicons. In each replicon, replication is initiated at an origin. With the exception of those in budding yeast, replication origins, including the only one to be isolated so far from a plant, do not appear to embody a specific sequence; rather, they are AT-rich, with short tracts of locally bent DNA. The proteins involved in initiation are remarkably similar across the range of eukaryotes. Nevertheless, their activity may be modified by plant-specific mechanisms, including regulation by plant hormones. The molecular features of initiation are seen in a much simpler form in the Archaea. In particular, where eukaryotes possess a number of closely related proteins that form ‘hetero-complexes’ (such as the origin recognition complex and the MCM complex), archaeans typically possess one type of protein (e.g. one MCM) that forms a homo-complex. This suggests that several eukaryotic initiation proteins have evolved from archaeal ancestors by gene duplication and divergence. PMID:21508040

Factors Associated with Timing of Initiation of Antiretroviral Therapy among HIV-1 Infected Adults in the Niger Delta Region of Nigeria

Science.gov (United States)

Ogoina, Dimie

2015-01-01

Introduction Based on growing evidence mainly from countries outside Sub-Saharan Africa, the World Health Organisation (WHO) now recommends initiation of antiretroviral therapy (ART) in HIV-infected individuals in developing countries when CD4 cell count (CD4+) is ≤ 500cells/ul. Nigeria accounts for about 14% of the estimated HIV/AIDS burden in Sub-Saharan Africa. We evaluated the factors associated with timing of initiation of ART among treatment-ineligible HIV-infected adults from Nigeria. Methods We retrospectively reviewed the hospital records of ART ineligible HIV-infected adults who enrolled into HIV care between January 2008 and December 2012 at two major tertiary hospitals in Bayelsa State, South-South Nigeria. Demographic, clinical and laboratories data were obtained at presentation, at each subsequent visit at 6 monthly intervals and at time of initiation of ART. Cox proportional regression and Kaplan-Meier survival analysis were used to evaluate independent predictors of time to initiation of ART. Results Amongst the 280 study participants, 70.6% were females, 62.6% had CD4+ ≥500cells/ul, 48.4% had WHO HIV Stage 1 disease and 34.3% were lost to follow up. In a cohort of 180 participants followed up for ≥3months, participants with CD4+ of 351-500cells/ul and stage 2 disease were more likely to start ART earlier than those with CD4+ > 500cells/ul (Hazard ratio [HR]-1.7, 95% confidence interval [CI] of 1.0-2.9) and stage 1 disease (HR-2.3 (95% CI-1.3-4.2) respectively. HIV-infected adults with faster CD4+ decay required earlier ART initiation, especially in the first year of follow up. Conclusion ART-ineligible HIV-infected adults on follow up in South-South Nigeria are more likely to require earlier initiation of ART if they have stage 2 HIV disease or CD4+ ≤500cells/ul at presentation. Our findings suggest faster progression of HIV-disease in these groups of individuals and corroborate the growing evidence in support for earlier initiation of ART

Classical particle limit of non-relativistic quantum mechanics

International Nuclear Information System (INIS)

Zucchini, R.

1984-01-01

We study the classical particle limit of non-relativistic quantum mechanics. We show that the unitary group describing the evolution of the quantum fluctuation around any classical phase orbit has a classical limit as h → 0 in the strong operator topology for a very large class of time independent scalar and vector potentials, which in practice covers all physically interesting cases. We also show that the mean values of the quantum mechanical position and velocity operators on suitable states, obtained by time evolution of the product of a Weyl operator centred around the large coordinates and momenta and a fixed n-independent wave function, converge to the solution of the classical equations with initial data as h → 0 for a broad class of repulsive interactions

Curcumin homing to the nucleolus: mechanism for initiation of an apoptotic program.

Science.gov (United States)

Ghosh, Mistuni; Ryan, Robert O

2014-11-01

Curcumin is a plant-derived polyphenol that displays antitumor properties. Incubation of cultured SF-767 glioma cells with curcumin gave rise to intense intranuclear foci of curcumin fluorescence. In vitro studies revealed that nuclear homing by curcumin is not a result of DNA/chromatin binding. On the other hand, curcumin fluorescence colocalized with nucleophosmin, a nucleolus marker protein. To determine the temporal relationship between curcumin-induced apoptosis and nucleolar homing, confocal live cell imaging was performed. The data show that curcumin localization to the nucleolus occurs prior to cell surface exposure of phosphatidylserine. In studies of the mechanism of curcumin-induced apoptosis in SF-767 cells, its effect on the subcellular location of p14(ARF) was determined. Whereas p14(ARF) was confined to the nucleolus in untreated cells, 2 h following incubation with curcumin, it displayed a diffuse nuclear distribution. Given the role of nuclear p14(ARF) in binding the E3 ubiquitin ligase, mouse double minute 2 homolog (MDM2), the effect of curcumin treatment on cellular levels of the tumor suppressor protein, p53, was examined. Between 2 and 4 h following curcumin treatment, p53 levels increased with maximum levels reached by 8 h. Thus, curcumin homing to the nucleolus induces redistribution of p14(ARF) to the nucleoplasm where interaction with MDM2 leads to stabilization of p53, with subsequent initiation of apoptosis. Copyright © 2014 Elsevier Inc. All rights reserved.

Development of a personal obligation to shift electricity use: Initial determinants and maintenance over time

Energy Technology Data Exchange (ETDEWEB)

Linz, D.; Heberlein, T.

1984-03-01

The present study is an attempt to determine if the beliefs which underly the formation of an obligation to shift electricity use among household consumers also contribute to maintenance of the obligation over time. Utility customer beliefs about and obligation toward shifting electricity use in their households from on-peak to off-peak times were examined in 1977, when the customers had no behavioral experience with electricity shifting. In 1979, after two years of experience with shifting appliance use from on-peak to off-peak times, customers were again surveyed and the same variables measured. The results indicated that the formation of a feeling of obligation to shift electricity in 1977 use was marginally dependent on other beliefs. By 1979, these variables were completely supplanted by the subjects' self-perception of their shifting behavior. While cognitive variables are important in the initial formation of a personal obligation to engage in shifting electricity use, the perpetuation of a feeling of obligation to shift over a period of years depends on perception of how often electricity shifting was undertaken and how much electricity had been shifted from on- to off-peak times.

The Effects of Reducing Preparation Time on the Execution of Intentionally Curved Trajectories: Optimization and Geometrical Analysis

Directory of Open Access Journals (Sweden)

Dovrat Kohen

2017-06-01

Full Text Available When subjects are intentionally preparing a curved trajectory, they are engaged in a time-consuming trajectory planning process that is separate from target selection. To investigate the construction of such a plan, we examined the effect of artificially shortening preparation time on the performance of intentionally curved trajectories using the Timed Response task that enforces initiation of movements prematurely. Fifteen subjects performed obstacle avoidance movements toward one of four targets that were presented 25 or 350 ms before the “go” signal, imposing short and long preparation time conditions with mean values of 170 ms and 493 ms, respectively. While trajectories with short preparation times showed target specificity at their onset, they were significantly more variable and showed larger angular deviations from the lines connecting their initial position and the target, compared to the trajectories with long preparation times. Importantly, the trajectories of the short preparation time movements still reached their end-point targets accurately, with comparable movement durations. We hypothesize that success in the short preparation time condition is a result of an online control mechanism that allows further refinement of the plan during its execution and study this control mechanism with a novel trajectory analysis approach using minimum jerk optimization and geometrical modeling approaches. Results show a later agreement of the short preparation time trajectories with the optimal minimum jerk trajectory, accompanied by a later initiation of a parabolic segment. Both observations are consistent with the existence of an online trajectory planning process.Our results suggest that when preparation time is not sufficiently long, subjects execute a more variable and less optimally prepared initial trajectory and exploit online control mechanisms to refine their actions on the fly.

The Effects of Reducing Preparation Time on the Execution of Intentionally Curved Trajectories: Optimization and Geometrical Analysis

Science.gov (United States)

Kohen, Dovrat; Karklinsky, Matan; Meirovitch, Yaron; Flash, Tamar; Shmuelof, Lior

2017-01-01

When subjects are intentionally preparing a curved trajectory, they are engaged in a time-consuming trajectory planning process that is separate from target selection. To investigate the construction of such a plan, we examined the effect of artificially shortening preparation time on the performance of intentionally curved trajectories using the Timed Response task that enforces initiation of movements prematurely. Fifteen subjects performed obstacle avoidance movements toward one of four targets that were presented 25 or 350 ms before the “go” signal, imposing short and long preparation time conditions with mean values of 170 ms and 493 ms, respectively. While trajectories with short preparation times showed target specificity at their onset, they were significantly more variable and showed larger angular deviations from the lines connecting their initial position and the target, compared to the trajectories with long preparation times. Importantly, the trajectories of the short preparation time movements still reached their end-point targets accurately, with comparable movement durations. We hypothesize that success in the short preparation time condition is a result of an online control mechanism that allows further refinement of the plan during its execution and study this control mechanism with a novel trajectory analysis approach using minimum jerk optimization and geometrical modeling approaches. Results show a later agreement of the short preparation time trajectories with the optimal minimum jerk trajectory, accompanied by a later initiation of a parabolic segment. Both observations are consistent with the existence of an online trajectory planning process.Our results suggest that when preparation time is not sufficiently long, subjects execute a more variable and less optimally prepared initial trajectory and exploit online control mechanisms to refine their actions on the fly. PMID:28706478

General-Covariant Quantum Mechanics of Dirac Particle in Curved Space-Times

International Nuclear Information System (INIS)

Tagirov, Eh.A.

1994-01-01

A general covariant analog of the standard non-relativistic Quantum Mechanics with relativistic corrections in normal geodesic frames in the general Riemannian space-time is constructed for the Dirac particle. Not only the Pauli equation with hermitian Hamiltonian and the pre-Hilbert structure of space of its solutions but also the matrix elements of hermitian operators of momentum, (curvilinear) spatial coordinates and spin of the particle are deduced as general-covariant asymptotic approximation in c -2 , c being the velocity of light, to their naturally determined general-relativistic pre images. It is shown that the Hamiltonian in the Pauli equation originated by the Dirac equation is unitary equivalent to the operator of energy, originated by the metric energy-momentum tensor of the spinor field. Commutation and other properties of the observables connected with the considered change of geometrical background of Quantum Mechanics are briefly discussed. 7 refs

Interactive relationship between the mechanical properties of food and the human response during the first bite.

Science.gov (United States)

Dan, Haruka; Kohyama, Kaoru

2007-05-01

Biting is an action that results from interplay between food properties and the masticatory system. The mechanical factors of food that cause biting adaptation and the recursive effects of modified biting on the mechanical phenomena of food are largely unknown. We examined the complex interaction between the bite system and the mechanical properties. Nine subjects were each given a cheese sample and instructed to bite it once with their molar teeth. An intra-oral bite force-time profile was measured using a tactile pressure-measurement system with a sheet sensor inserted between the molars. Time, force, and impulse for the first peak were specified as intra-oral parameters of the sample fracture. Mechanical properties of the samples were also examined using a universal testing machine at various test speeds. Besides fracture parameters, initial slope was also determined as a mechanical property possibly sensed shortly after bite onset. The bite profile was then examined based on the mechanical parameters. Sample-specific bite velocities were identified as characteristic responses of a human bite. A negative correlation was found between bite velocity and initial slope of the sample, suggesting that the initial slope is the mechanical factor that modifies the consequent bite velocity. The sample-specific bite velocity had recursive effects on the following fracture event, such that a slow velocity induced a low bite force and high impulse for the intra-oral fracture event. We demonstrated that examination of the physiological and mechanical factors during the first bite can provide valuable information about the food-oral interaction.