Moving into the 21st century - The United States' Research Reactor Spent Nuclear Fuel Acceptance Program

International Nuclear Information System (INIS)

Huizenga, David G.; Mustin, Tracy P.; Saris, Elizabeth C.; Reilly, Jill E.

1999-01-01

Since 1996, when the United States Department of Energy and the Department of State jointly adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel, twelve shipments totaling 2,985 MTR and TRIGA spent nuclear fuel assemblies from research reactors around the world have been accepted into the United States. These shipments have contained approximately 1.7 metric tons of HEU and 0.6 metric tons of LEU. Foreign research reactor operators played a significant role in this success. A new milestone in the acceptance program occurred during the summer of 1999 with the arrival of TRIGA spent nuclear fuel from Europe through the Charleston Naval Weapons Station via the Savannah River Site to the Idaho National Engineering and Environmental Laboratory. This shipment consisted of five casks of TRIGA spent nuclear fuel from research reactors in Germany, Italy, Slovenia, and Romania. These casks were transported by truck approximately 2,400 miles across the United States (one cask packaged in an ISO container per truck). Drawing upon lessons learned in previous shipments, significant technical, legal, and political challenges were addressed to complete this cross-country shipment. Other program activities since the last RERTR meeting have included: formulation of a methodology to determine the quantity of spent nuclear fuel in a damaged condition that may be transported in a particular cask (containment analysis for transportation casks); publication of clarification of the fee policy; and continued planning for the outyears of the acceptance policy including review of reactors and eligible material quantities. The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program continues to demonstrate success due to the continuing commitment between the United States and the research reactor community to make this program work. We strongly encourage all eligible research reactors to decide as soon as possible to

Acceptance of spent nuclear fuel in multiple element sealed canisters by the Federal Waste Management System

International Nuclear Information System (INIS)

1990-03-01

This report is one of a series of eight prepared by E.R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high level waste will be accepted in the following categories: (1) failed fuel; (2) consolidated fuel and associated structural parts; (3) non-fuel-assembly hardware; (4) fuel in metal storage casks; (5) fuel in multi-element sealed canisters; (6) inspection and testing requirements for wastes; (7) canister criteria; (8) spent fuel selection for delivery; and (9) defense and commercial high-level waste packages. 14 refs., 27 figs

A continuing success - The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program

International Nuclear Information System (INIS)

Mustin, Tracy P.; Clapper, Maureen; Reilly, Jill E.

2000-01-01

The United States Department of Energy, in consultation with the Department of State, adopted the Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel in May 1996. To date, the Foreign Research Reactor (FRR) Spent Nuclear Fuel (SNF) Acceptance Program, established under this policy, has completed 16 spent fuel shipments. 2,651 material test reactor (MTR) assemblies, one Slowpoke core containing less than 1 kilogram of U.S.-origin enriched uranium, 824 Training, Research, Isotope, General Atomic (TRIGA) rods, and 267 TRIGA pins from research reactors around the world have been shipped to the United States so far under this program. As the FRR SNF Acceptance Program progresses into the fifth year of implementation, a second U.S. cross country shipment has been completed, as well as a second overland truck shipment from Canada. Both the cross country shipment and the Canadian shipment were safely and successfully completed, increasing our knowledge and experience in these types of shipments. In addition, two other shipments were completed since last year's RERTR meeting. Other program activities since the last meeting included: taking pre-emptive steps to avoid license amendment pitfalls/showstoppers for spent fuel casks, publication of a revision to the Record of Decision allowing up to 16 casks per ocean going vessel, and the issuance of a cable to 16 of the 41 eligible countries reminding their governments and the reactor operators that the U.S.-origin uranium in their research reactors may be eligible for return to the United States under the Acceptance Program and urging them to begin discussions on shipping schedules. The FRR SNF program has also supported the Department's implementation of the competitive pricing policy for uranium and resumption of shipments of fresh uranium for fabrication into assemblies for research reactors. The United States Foreign Research Reactor Spent Nuclear Fuel Acceptance Program continues

SOCIAL INTEGRATION: TESTING ANTECEDENTS OF TIME SPENT ONLINE

Directory of Open Access Journals (Sweden)

Lily Suriani Mohd Arif

2013-07-01

Full Text Available The literature on the relationship of social integration and time spent onlineprovides conflicting evidence of the relationship of social integration with timespent online. The study identifies and highlightsthe controversy and attempts toclarify the relationship of social integration withtime spent online bydecomposing the construct social integration into its affective and behavioraldimensions . Thestudy tests antecedents and effects of time spent online in arandom sample of senior level undergraduate students at a public university inMalaysia. The findings indicated that while self-report measures of behavioralsocial integration did not predict time spent online, and, the affective socialintegration had an inverse relationship with time spent online.

Building on success. The foreign research reactor spent nuclear fuel acceptance program

International Nuclear Information System (INIS)

Huizenga, David G.; Mustin, Tracy P.; Saris, Elizabeth C.; Massey, Charles D.

1998-01-01

The second year of implementation of the research reactor spent nuclear fuel acceptance program was marked by significant challenges and achievements. In July 1998, the Department of Energy completed by significant challenges and achievements. In July 1998, the Department of Energy completed its first shipment of spent fuel from Asia via the Concord Naval Weapons Station in California to the Idaho National Engineering and Environmental (INEEL). This shipment, which consisted of three casks of spent nuclear fuel from two research reactors in the Republic of Korea, presented significant technical, legal, and political challenges in the United States and abroad. Lessons learned will be used in the planning and execution of our next significant milestone, a shipment of TRIGA spent fuel from research reactors in Europe to INEEL, scheduled for the summer of 1999. This shipment will include transit across the United States for over 2,000 miles. Other challenges and advances include: clarification of the fee policy to address changes in the economic status of countries during the life of the program; resolution of issues associated with cask certification and the specific types and conditions of spent fuel proposed for transport; revisions to standard contract language in order to more clearly address unique shipping situations; and priorization and scheduling of shipments to most effectively implement the program. As of this meeting, eight shipments, consisting of nearly 2,000 spent fuel assemblies from fifteen countries, have been successfully completed. With the continued cooperation of the international research reactor community, we are committed to building on this success in the remaining years of the program. (author)

5 CFR 551.425 - Time spent receiving medical attention.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Time spent receiving medical attention... Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for and receiving medical attention for illness or injury shall be considered hours of work if: (1) The...

Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

International Nuclear Information System (INIS)

Taylor, L.L.; Shikashio, R.

1993-09-01

The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms

Spent fuel disassembly hardware and other non-fuel bearing components: characterization, disposal cost estimates, and proposed repository acceptance requirements

Energy Technology Data Exchange (ETDEWEB)

Luksic, A.T.; McKee, R.W.; Daling, P.M.; Konzek, G.J.; Ludwick, J.D.; Purcell, W.L.

1986-10-01

There are two categories of waste considered in this report. The first is the spent fuel disassembly (SFD) hardware. This consists of the hardware remaining after the fuel pins have been removed from the fuel assembly. This includes end fittings, spacer grids, water rods (BWR) or guide tubes (PWR) as appropriate, and assorted springs, fasteners, etc. The second category is other non-fuel-bearing (NFB) components the DOE has agreed to accept for disposal, such as control rods, fuel channels, etc., under Appendix E of the standard utiltiy contract (10 CFR 961). It is estimated that there will be approximately 150 kg of SFD and NFB waste per average metric ton of uranium (MTU) of spent uranium. PWR fuel accounts for approximately two-thirds of the average spent-fuel mass but only 50 kg of the SFD and NFB waste, with most of that being spent fuel disassembly hardware. BWR fuel accounts for one-third of the average spent-fuel mass and the remaining 100 kg of the waste. The relatively large contribution of waste hardware in BWR fuel, will be non-fuel-bearing components, primarily consisting of the fuel channels. Chapters are devoted to a description of spent fuel disassembly hardware and non-fuel assembly components, characterization of activated components, disposal considerations (regulatory requirements, economic analysis, and projected annual waste quantities), and proposed acceptance requirements for spent fuel disassembly hardware and other non-fuel assembly components at a geologic repository. The economic analysis indicates that there is a large incentive for volume reduction.

Optimization of time and location dependent spent nuclear fuel storage capacity

International Nuclear Information System (INIS)

Macek, V.

1977-01-01

A linear spent fuel storage model is developed to identify cost-effective spent nuclear fuel storage strategies. The purpose of this model is to provide guidelines for the implementation of the optimal time-dependent spent fuel storage capacity expansion in view of the current economic and regulatory environment which has resulted in phase-out of the closed nuclear fuel cycle. Management alternatives of the spent fuel storage backlog, which is created by mismatch between spent fuel generation rate and spent fuel disposition capability, are represented by aggregate decision variables which describe the time dependent on-reactor-site and off-site spent fuel storage capacity additions, and the amount of spent fuel transferred to off-site storage facilities. Principal constraints of the model assure determination of cost optimal spent fuel storage expansion strategies, while spent fuel storage requirements are met at all times. A detailed physical and economic analysis of the essential components of the spent fuel storage problem, which precedes the model development, assures its realism. The effects of technological limitations on the on-site spent fuel storage expansion and timing of reinitiation of the spent fuel reprocessing on optimal spent fuel storage capacity expansion are investigated. The principal results of the study indicate that (a) expansion of storage capacity beyond that of currently planned facilities is necessary, and (b) economics of the post-reactor fuel cycle is extremely sensitive to the timing of reinitiation of spent fuel reprocessing. Postponement of reprocessing beyond mid-1982 may result in net negative economic liability of the back end of the nuclear fuel cycle

Photoprotection by sunscreen depends on time spent on application.

Science.gov (United States)

Heerfordt, Ida M; Torsnes, Linnea R; Philipsen, Peter A; Wulf, Hans Christian

2018-03-01

To be effective, sunscreens must be applied in a sufficient quantity and reapplication is recommended. No previous study has investigated whether time spent on sunscreen application is important for the achieved photoprotection. To determine whether time spent on sunscreen application is related to the amount of sunscreen used during a first and second application. Thirty-one volunteers wearing swimwear applied sunscreen twice in a laboratory environment. Time spent and the amount of sunscreen used during each application was measured. Subjects' body surface area accessible for sunscreen application (BSA) was estimated from their height, weight and swimwear worn. The average applied quantity of sunscreen after each application was calculated. Subjects spent on average 4 minutes and 15 seconds on the first application and approximately 85% of that time on the second application. There was a linear relationship between time spent on application and amount of sunscreen used during both the first and the second application (P applications. After the first application, subjects had applied a mean quantity of sunscreen of 0.71 mg/cm 2 on the BSA, and after the second application, a mean total quantity of 1.27 mg/cm 2 had been applied. We found that participants applied a constant amount of sunscreen per minute during both a first and a second application. Measurement of time spent on application of sunscreen on different body sites may be useful in investigating the distribution of sunscreen in real-life settings. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The United States spent fuel acceptance policy - A year in review

International Nuclear Information System (INIS)

Huizenga, David G.

1997-01-01

Through the combined efforts of the United States and many other nations participating in the Reduced Enrichment for Research and Test Reactors (RERTR) program, much progress has been made toward reducing the amount of highly enriched uranium (HEU) in international commerce. A little more than a year ago, the U.S. Department of Energy adopted a new 1 0-year policy to accept research reactor spent nuclear fuel into the United States from other nations. The policy supports U.S. nuclear weapons nonproliferation objectives and demonstrates the continued commitment of the U.S. to the RERTR program. This paper is a review of the past year's activities and addresses the progress made since the policy was implemented

Adolescent Depression and Time Spent with Parents and Siblings

Science.gov (United States)

Desha, Laura N.; Nicholson, Jan M.; Ziviani, Jenny M.

2011-01-01

This study examines adolescent depressive symptoms and the quantity and quality of time spent by adolescents with their parents and siblings. We use measures of the quality of relationships with parents and siblings as proxy indicators for the quality of time spent with these social partners. The study emphasizes the salience of parent…

Time Spent Outdoors, Depressive Symptoms, and Variation by Race and Ethnicity.

Science.gov (United States)

Beyer, Kirsten M M; Szabo, Aniko; Nattinger, Ann B

2016-09-01

Numerous studies have explored neighborhood environmental correlates of mental illnesses, presuming that the time individuals spend in their environment can confer benefit or harm based on environmental characteristics. However, few population-based studies have directly examined the relationship between time spent outdoors and mental health, and little work has been done to explore how experiences differ by race and ethnicity. Though some have proposed "doses of outdoor time" to improve health, the absence of information about the benefits conferred by particular "doses," and expected baseline levels of outdoor time, are needed to inform the development of recommendations and interventions. This study examined the relationship between time spent outdoors and depression among a population-based sample of American adults, characterized current levels of time spent outdoors by race and ethnicity, and examined how the relationship between time spent outdoors and depression varies by race and ethnicity. Descriptive statistics and survey regression models were used to examine data from the National Health and Nutrition Examination Survey for 2009-2012. Findings provide evidence that time spent outdoors is associated with fewer depressive symptoms, but this benefit may not be equally distributed by race and ethnicity. Descriptive analyses also reveal differences in time spent outdoors among different racial and ethnic groups. Study findings support the notion that increasing time spent outdoors may result in mental health benefits. However, this study questions whether that benefit is experienced equally among different groups, particularly given differences in occupational experiences and environmental characteristics of neighborhoods. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Time spent on home food preparation and indicators of healthy eating.

Science.gov (United States)

Monsivais, Pablo; Aggarwal, Anju; Drewnowski, Adam

2014-12-01

The amount of time spent on food preparation and cooking may have implications for diet quality and health. However, little is known about how food-related time use relates to food consumption and spending, either at restaurants or for food consumed at home. To quantitatively assess the associations among the amount of time habitually spent on food preparation and patterns of self-reported food consumption, food spending, and frequency of restaurant use. This was a cross-sectional study of 1,319 adults in a population-based survey conducted in 2008-2009. The sample was stratified into those who spent 2 hours/day on food preparation and cleanup. Descriptive statistics and multivariable regression models examined differences between time-use groups. Analyses were conducted in 2011-2013. Individuals who spent the least amount of time on food preparation tended to be working adults who placed a high priority on convenience. Greater amount of time spent on home food preparation was associated with indicators of higher diet quality, including significantly more frequent intake of vegetables, salads, fruits, and fruit juices. Spending food preparation was associated with significantly more money spent on food away from home and more frequent use of fast food restaurants compared to those who spent more time on food preparation. The findings indicate that time might be an essential ingredient in the production of healthier eating habits among adults. Further research should investigate the determinants of spending time on food preparation. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Final environmental statement: US Spent Fuel Policy. Storage of foreign spent power reactor fuel

International Nuclear Information System (INIS)

1980-05-01

In October 1977, the Department of Energy (DOE) announced a Spent Fuel Storage Policy for nuclear power reactors. Under this policy, as approved by the President, US utilities will be given the opportunity to deliver spent fuel to US Government custody in exchange for payment of a fee. The US Government will also be prepared to accept a limited amount of spent fuel from foreign sources when such action would contribute to meeting nonproliferation goals. Under the new policy, spent fuel transferred to the US Government will be delivered - at user expense - to a US Government-approved site. Foreign spent fuel would be stored in Interim Spent Fuel Storage (ISFS) facilities with domestic fuel. This volume of the environmental impact statement includes effects associated with implementing or not implementing the Spent Fuel Storage Policy for the foreign fuels. The analyses show that there are no substantial radiological health impacts whether the policy is implemented or not. In no case considered does the population dose commitment exceed 0.000006% of the world population dose commitment from natural radiation sources over the period analyzed. Full implementation of the US offer to accept a limited amount of foreign spent fuel for storage provides the greatest benefits for US nonproliferation policy. Acceptance of lesser quantities of foreign spent fuel in the US or less US support of foreign spent fuel storage abroad provides some nonproliferation benefits, but at a significantly lower level than full implementation of the offer. Not implementing the policy in regard to foreign spent fuel will be least productive in the context of US nonproliferation objectives. The remainder of the summary provides a brief description of the options that are evaluated, the facilities involved in these options, and the environmental impacts, including nonproliferation considerations, associated with each option

Time spent in physical activity and sedentary behaviors on the working day: the American time use survey.

Science.gov (United States)

Tudor-Locke, Catrine; Leonardi, Claudia; Johnson, William D; Katzmarzyk, Peter T

2011-12-01

To determine time spent on the working day in sleep, work, sedentary behaviors, and light-, moderate-, and vigorous-intensity behaviors by occupation intensity. Data came from 30,758 working respondents to the 2003 to 2009 American Time Use Survey. Mean ± SEM time spent in work, sedentary behaviors, light-, moderate-, and vigorous-intensity activities, and sleep were computed by occupations classified as sedentary, light, moderate, and vigorous intensity. On average, approximately 32% of the 24-hour day was spent sleeping and approximately 31% was spent at work. Time spent in sedentary behaviors outside of work was higher, and light-intensity time was lower, with higher levels of intensity-defined occupation. Those employed in sedentary occupations were sedentary for approximately 11 hours per day, leaving little time to achieve recommended levels of physical activity for overall health.

Transportation of failed or damaged foreign research reactor spent nuclear fuel

International Nuclear Information System (INIS)

Messick, C.E.; Mustin, T.P.; Massey, C.D.

1998-01-01

Since resuming the Foreign Research Reactor Spent Nuclear Fuel (FRR SNF) Acceptance Program in 1996, the Program has had to deal with difficult issues associated with the transportation of failed or damaged spent fuel. In several instances, problems with failed or damaged fuel have prevented the acceptance of the fuel at considerable cost to both the Department of Energy (DOE) and research reactor operators. In response to the problems faced by the Acceptance Program, DOE has undertaken significant steps to better define the spent fuel acceptance criteria. DOE has worked closely with the U.S. Nuclear Regulatory Commission to address failed or damaged research reactor spent fuel and to identify cask certificate issues which must be resolved by cask owners and foreign regulatory authorities. The specific issues associated with the transport of Materials Testing Reactor (MTR)-type FRR SNF will be discussed. The information presented will include U.S. Nuclear Regulatory Commission regulatory issues, cask certificate issues, technical constraints, and lessons learned. Specific information will also be provided on the latest efforts to revise DOE's Appendix B, Transport Package (Cask) Acceptance Criteria. The information presented in this paper will be important to foreign research reactor operators, shippers, and cask vendors, so that appropriate amendments to the Certificate of Compliance for spent fuel casks can be submitted in a timely manner to facilitate the safe and scheduled transport of FRR SNF

Progress of the United States foreign research reactor spent nuclear fuel acceptance program. Reduced enrichment for research and test reactors conference 2002

International Nuclear Information System (INIS)

Clapper, Maureen

2002-01-01

Foreign Research Reactor Spent nuclear fuel Acceptance Program is actively working with research reactors to accept eligible material before the Acceptance Policy proper expires in 2006. Reactors/governments wishing to participate should contact US immediately if they have not done so already. Program operations are changing to adapt to new challenges. We continue to promote the importance of this Program to senior management in the Department of Energy

Time Spent on Social Network Sites and Psychological Well-Being: A Meta-Analysis.

Science.gov (United States)

Huang, Chiungjung

2017-06-01

This meta-analysis examines the relationship between time spent on social networking sites and psychological well-being factors, namely self-esteem, life satisfaction, loneliness, and depression. Sixty-one studies consisting of 67 independent samples involving 19,652 participants were identified. The mean correlation between time spent on social networking sites and psychological well-being was low at r = -0.07. The correlations between time spent on social networking sites and positive indicators (self-esteem and life satisfaction) were close to 0, whereas those between time spent on social networking sites and negative indicators (depression and loneliness) were weak. The effects of publication outlet, site on which users spent time, scale of time spent, and participant age and gender were not significant. As most included studies used student samples, future research should be conducted to examine this relationship for adults.

TRIGA Mark II Ljubljana - spent fuel transportation

International Nuclear Information System (INIS)

Ravnik, M.; Dimic, V.

2008-01-01

The most important activity in 1999 was shipment of the spent fuel elements back to the United States for final disposal. This activity started already in 1998 with some governmental support. In July 1999 all spent fuel elements (219 pieces) from the TRIGA research reactor in Ljubljana were shipped back to the United Stated by the ship from the port Koper in Slovenia. At the same time shipment of the spent fuel from the research reactor in Pitesti, Romania, and the research reactor in Rome, Italy, was conducted. During the loading the radiation exposure to the workers was rather low. The loading and shipment of the spent nuclear fuel went very smoothly and according the accepted time table. During the last two years the TRIGA research reactor in Ljubljana has been in operation about 1100 hours per year and without any undesired shut-down. (authors)

Implementation plan of the environmental impact statement on a proposed policy for acceptance of foreign research reactor spent nuclear fuel

International Nuclear Information System (INIS)

Matos, J.E.

1996-01-01

This paper provides a summary of selected portions of the United States Department of Energy's ''Implementation Plan for the Environmental Impact Statement on a Proposed Policy for Acceptance of Foreign Research Reactor Spent Nuclear Fuel'', DOE/EIS-0218, October 1994

Estimated time spent on preventive services by primary care physicians

Directory of Open Access Journals (Sweden)

Gradison Margaret

2008-12-01

Full Text Available Abstract Background Delivery of preventive health services in primary care is lacking. One of the main barriers is lack of time. We estimated the amount of time primary care physicians spend on important preventive health services. Methods We analyzed a large dataset of primary care (family and internal medicine visits using the National Ambulatory Medical Care Survey (2001–4; analyses were conducted 2007–8. Multiple linear regression was used to estimate the amount of time spent delivering each preventive service, controlling for demographic covariates. Results Preventive visits were longer than chronic care visits (M = 22.4, SD = 11.8, M = 18.9, SD = 9.2, respectively. New patients required more time from physicians. Services on which physicians spent relatively more time were prostate specific antigen (PSA, cholesterol, Papanicolaou (Pap smear, mammography, exercise counseling, and blood pressure. Physicians spent less time than recommended on two "A" rated ("good evidence" services, tobacco cessation and Pap smear (in preventive visits, and one "B" rated ("at least fair evidence" service, nutrition counseling. Physicians spent substantial time on two services that have an "I" rating ("inconclusive evidence of effectiveness", PSA and exercise counseling. Conclusion Even with limited time, physicians address many of the "A" rated services adequately. However, they may be spending less time than recommended for important services, especially smoking cessation, Pap smear, and nutrition counseling. Future research is needed to understand how physicians decide how to allocate their time to address preventive health.

Full-Scale Cask Testing and Public Acceptance of Spent Nuclear Fuel Shipments - 12254

Energy Technology Data Exchange (ETDEWEB)

Dilger, Fred [Black Mountain Research, Henderson, NV 81012 (United States); Halstead, Robert J. [State of Nevada Agency for Nuclear Projects Carson City, NV 80906 (United States); Ballard, James D. [Department of Sociology, California State University, Northridge Northridge, CA 91330 (United States)

2012-07-01

Full-scale physical testing of spent fuel shipping casks has been proposed by the National Academy of Sciences (NAS) 2006 report on spent nuclear fuel transportation, and by the Presidential Blue Ribbon Commission (BRC) on America's Nuclear Future 2011 draft report. The U.S. Nuclear Regulatory Commission (NRC) in 2005 proposed full-scale testing of a rail cask, and considered 'regulatory limits' testing of both rail and truck casks (SRM SECY-05-0051). The recent U.S. Department of Energy (DOE) cancellation of the Yucca Mountain project, NRC evaluation of extended spent fuel storage (possibly beyond 60-120 years) before transportation, nuclear industry adoption of very large dual-purpose canisters for spent fuel storage and transport, and the deliberations of the BRC, will fundamentally change assumptions about the future spent fuel transportation system, and reopen the debate over shipping cask performance in severe accidents and acts of sabotage. This paper examines possible approaches to full-scale testing for enhancing public confidence in risk analyses, perception of risk, and acceptance of spent fuel shipments. The paper reviews the literature on public perception of spent nuclear fuel and nuclear waste transportation risks. We review and summarize opinion surveys sponsored by the State of Nevada over the past two decades, which show consistent patterns of concern among Nevada residents about health and safety impacts, and socioeconomic impacts such as reduced property values along likely transportation routes. We also review and summarize the large body of public opinion survey research on transportation concerns at regional and national levels. The paper reviews three past cask testing programs, the way in which these cask testing program results were portrayed in films and videos, and examines public and official responses to these three programs: the 1970's impact and fire testing of spent fuel truck casks at Sandia National

Time Spent, Workload, and Student and Faculty Perceptions in a Blended Learning Environment

Science.gov (United States)

Schumacher, Christie; Arif, Sally

2016-01-01

Objective. To evaluate student perception and time spent on asynchronous online lectures in a blended learning environment (BLE) and to assess faculty workload and perception. Methods. Students (n=427) time spent viewing online lectures was measured in three courses. Students and faculty members completed a survey to assess perceptions of a BLE. Faculty members recorded time spent creating BLEs. Results. Total time spent in the BLE was less than the allocated time for two of the three courses by 3-15%. Students preferred online lectures for their flexibility, students’ ability to apply information learned, and congruence with their learning styles. Faculty members reported the BLE facilitated higher levels of learning during class sessions but noted an increase in workload. Conclusion. A BLE increased faculty workload but was well received by students. Time spent viewing online lectures was less than what was allocated in two of the three courses. PMID:27667839

QUALITY AND SHELF LIFE EVALUATION OF NUGGETS PREPARED FROM SPENT DUCK AND SPENT HEN MEAT

Directory of Open Access Journals (Sweden)

Rajesh Kumar

2015-12-01

Full Text Available A study was conducted to compare the quality of nuggets prepared from spent hen and duck meat. The cooked nuggets were analyzed for pH, thiobarbituric acid (TBA, tyrosine value (TV, moisture, fat, protein, total plate count (TPC and sensory evaluations. Nuggets prepared from spent hen meat showed significantly higher (p<0.05 moisture content however pH, fat and protein content were significantly higher (p<0.05 in duck nuggets. TBA values, TVs and (TPC were highest in duck nuggets but were within the acceptable level up to 7th day of refrigerated storage (4±1°C in both types of nuggets. Both nuggets maintain their sensory quality up to 7th day of refrigeration storage but spent hen nuggets were preferred by consumers compared to nuggets prepared from spent duck meat. Result of the study indicated that, despite the comparative differences among these nuggets, spent duck and hen meat could be used for preparation of nutritionally rich and acceptable nuggets.

Teacher Time Spent on Student Health Issues and School Nurse Presence

Science.gov (United States)

Hill, Nina Jean; Hollis, Marianne

2012-01-01

Elementary school teacher time spent on student health issues and the relationship to school nurse services was the focus of this 2-year study. A cross-sectional design was used to survey traditional and exceptional (special needs) classroom teachers about the time they spent on health issues and their perception of school nurse presence. The…

[Problematic Internet use, time spent online and personality traits].

Science.gov (United States)

Laconi, S; Andréoletti, A; Chauchard, E; Rodgers, R F; Chabrol, H

2016-06-01

Internet addiction or problematic Internet use is a recent and increasingly recognized disorder which has been consistently associated with many psychiatric disorders, adding to the documented negative consequences of problematic Internet use. However, very few studies have examined the relationship between problematic Internet use and personality traits and none in a French sample. Moreover, those which have evaluated this relationship have mainly been conducted on small samples. The main goal of our study was to explore the relationship between problematic Internet use, time spent online and personality traits in a French sample, taking into account the presence of depressive symptoms, and gender. A sample of 276 participants aged from 18 to 50 (M=28; SD=8.9) completed a questionnaire assessing problematic Internet use, time spent online, the presence of ten personality traits and depressive symptoms. Our results revealed significant differences between genders. Among men, problematic Internet use was associated with personality clusters A and B while in women no cluster or personality traits were associated. Time spent online was predicted by schizoid personality traits among men and avoidant personality traits among women. Our results indicate that cluster A (schizoid and schizotypal) and cluster B traits (borderline and antisocial) play a more important role in problematic Internet use than cluster C traits among men. Differences between men and women regarding the relationships between personality traits, time online and problematic Internet use may be related to differences in the activities engaged in by men and women online. We observed that communication websites use was more prevalent among women while erotic, gambling and shopping websites use was more prevalent among men suggesting that the characteristics of problematic Internet use may vary according to gender. Few studies have examined the relationship between problematic Internet use, time spent

It takes longer than you think: librarian time spent on systematic review tasks*

Science.gov (United States)

Bullers, Krystal; Howard, Allison M.; Hanson, Ardis; Kearns, William D.; Orriola, John J.; Polo, Randall L.; Sakmar, Kristen A.

2018-01-01

Introduction The authors examined the time that medical librarians spent on specific tasks for systematic reviews (SRs): interview process, search strategy development, search strategy translation, documentation, deliverables, search methodology writing, and instruction. We also investigated relationships among the time spent on SR tasks, years of experience, and number of completed SRs to gain a better understanding of the time spent on SR tasks from time, staffing, and project management perspectives. Methods A confidential survey and study description were sent to medical library directors who were members of the Association of Academic Health Sciences Libraries as well as librarians serving members of the Association of American Medical Colleges or American Osteopathic Association. Results Of the 185 participants, 143 (77%) had worked on an SR within the last 5 years. The number of SRs conducted by participants during their careers ranged from 1 to 500, with a median of 5. The major component of time spent was on search strategy development and translation. Average aggregated time for standard tasks was 26.9 hours, with a median of 18.5 hours. Task time was unrelated to the number of SRs but was positively correlated with years of SR experience. Conclusion The time required to conduct the librarian’s discrete tasks in an SR varies substantially, and there are no standard time frames. Librarians with more SR experience spent more time on instruction and interviews; time spent on all other tasks varied widely. Librarians also can expect to spend a significant amount of their time on search strategy development, translation, and writing. PMID:29632442

Developer’s time spent in a software project part using the SGD framework

OpenAIRE

Ciesluk, Simon

2016-01-01

Resource management is important for software projects to be successful. Time is one of these resources that needs to be managed. To do this you need to know how time resources are spent. Currently the existence of published material on time resources spent in a software project is almost none. In this thesis a research was conducted on how time resources are spent by an individual developer in a software project. The Self-Governance Developer framework was the tool used to gather these resou...

Time spent on television in European countries

NARCIS (Netherlands)

Vergeer, M.R.M.; Coenders, M.T.A.; Scheepers, P.L.H.; Konig, R.P.; Nelissen, P.W.M.; Huysmans, F.J.M.

2009-01-01

This study aims to explain the variation in time spent on watching television in 15 European Union countries, using determinants defined at the individual level, and characteristics defined at the national level, such as the number of channels and nature of the television supply. The results of the

Reevaluation of time spent indoors used for exposure dose assessment

International Nuclear Information System (INIS)

Hirose, Katsumi; Fujimoto, Kenzo

2016-01-01

A time spent indoors of sixteen hours per day (indoor occupancy factor: 0.67) has been used to assess the radiation dose of residents who spend daily life in the area contaminated due to the nuclear accident in Japan. However, much longer time is considered to be spent indoors for recent modern life. United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has been used an indoor occupancy factor of 0.8 since 1977 and a few reports suggested much higher indoor occupancy factors. Therefore it is important to reevaluate the indoor occupancy factor using current available survey data in Japan, such as 'NHK 2010 National Time Use Survey' and 'Survey on Time Use and Leisure Activities' of Statistics Bureau with certain assumption of time spent indoors in each daily activity. The total time spent indoors in a day is calculated to be 20.2 hours and its indoor occupancy factor is 0.84. Much lower indoor occupancy factors were derived from the survey data by Statistics Bureau for 10 to 14 and 15 to 19 years old groups and farmers who spend most of their time outdoors although present estimated indoor occupancy factor of 0.84 is still lower than those found in some of the relevant reports. A rounded indoor occupancy factor of 0.80 might be the appropriate conservative reference value to be used for the dose estimation of people who live in radioactively contaminated areas and for other relevant purposes of exposure assessment, taken into consideration the present results and values reported in United States Environmental Protection Agency (US EPA) and UNSCEAR. (author)

Spent fuel: prediction model development

International Nuclear Information System (INIS)

Almassy, M.Y.; Bosi, D.M.; Cantley, D.A.

1979-07-01

The need for spent fuel disposal performance modeling stems from a requirement to assess the risks involved with deep geologic disposal of spent fuel, and to support licensing and public acceptance of spent fuel repositories. Through the balanced program of analysis, diagnostic testing, and disposal demonstration tests, highlighted in this presentation, the goal of defining risks and of quantifying fuel performance during long-term disposal can be attained

Spent fuel characterization for the commercial waste and spent fuel packaging program

International Nuclear Information System (INIS)

Fish, R.L.; Davis, R.B.; Pasupathi, V.; Klingensmith, R.W.

1980-03-01

This document presents the rationale for spent fuel characterization and provides a detailed description of the characterization examinations. Pretest characterization examinations provide quantitative and qualitative descriptions of spent fuel assemblies and rods in their irradiated conditions prior to disposal testing. This information is essential in evaluating any subsequent changes that occur during disposal demonstration and laboratory tests. Interim examinations and post-test characterization will be used to identify fuel rod degradation mechanisms and quantify degradation kinetics. The nature and behavior of the spent fuel degradation will be defined in terms of mathematical rate equations from these and laboratory tests and incorporated into a spent fuel performance prediction model. Thus, spent fuel characterization is an essential activity in the development of a performance model to be used in evaluating the ability of spent fuel to meet specific waste acceptance criteria and in evaluating incentives for modification of the spent fuel assemblies for long-term disposal purposes

Spent fuel storage for ISER plant

International Nuclear Information System (INIS)

Nakajima, Takasuke; Kimura, Yuzi

1987-01-01

ISER is an intrinsically safe reactor basing its safety only on physical laws, and uses a steel reactor vessel in order to be economical. For such a new type reactor, it is essentially important to be accepted by the society by showing that the reactor is more profitable than conventional reactors to the public in both technical and economic viewpoint. It is also important that the reactor raises no serious problem in the total fuel cycle. Reprocessing seems one of the major worldwide fuel cycle issues. Spent fuel storage is also one of the key technologies for fuel cycle back end. Various systems for ISER spent fuel storages are examined in the present report. Spent fuel specifications of ISER are similar to those of LWR and therefore, most of LWR spent fuel technologies are basically applicable to ISER spent fuel. Design requirements and examples of storage facilities are also discussed. Dry storage seems to be preferable for the relatively long cooling time spent fuel like ISER's one from economical viewpoint. Vault storage will possibly be the most advantageous for large storage capacity. Another point for discussion is the location and international collaboration for spent fuel storages: ISER expected to be a worldwide energy source and therefore, international spent fuel management seems to be fairly attractive way for an energy recipient country. (Nogami, K.)

48 CFR 852.271-72 - Time spent by counselee in counseling process.

Science.gov (United States)

2010-10-01

... counseling process. 852.271-72 Section 852.271-72 Federal Acquisition Regulations System DEPARTMENT OF... Clauses 852.271-72 Time spent by counselee in counseling process. As prescribed in 871.212, insert the following clause: Time Spent by Counselee in Counseling Process (APR 1984) The contractor agrees that no...

Discount rate in the spent fuel storage and disposal fee

International Nuclear Information System (INIS)

Forster, J.D.; Cohen, S.

1980-04-01

After introducing the financial analyses, discount rates, and interest rates involved, the study discusses existing government guidelines for establishing charges for any service provided by the government to be paid by users of those services. Three current government user charges are analyzed including specifically their interest rate policies and how these charges provide precedent for the spent fuel acceptance and disposal fee: uranium enrichment services, the sale of electric power, and the delivery of experiments to orbit by the NASA Space Shuttle. The current DOE policy regarding this storage and disposal fee is stated and discussed. Features of this policy include: the full government cost is borne by users of the services provided; the fee is established and due in full at the time of spent fuel delivery; and the fee is adjusted when spent fuel is transferred from the AFR to the repository. Four evaluation criteria for use in analyzing the applications of discount rates in the spent fuel acceptance fee calculation are discussed. Three outstanding issues are discussed

Age at Menarche and Time Spent in Education: A Mendelian Randomization Study.

Science.gov (United States)

Gill, D; Del Greco M, F; Rawson, T M; Sivakumaran, P; Brown, A; Sheehan, N A; Minelli, C

2017-09-01

Menarche signifies the primary event in female puberty and is associated with changes in self-identity. It is not clear whether earlier puberty causes girls to spend less time in education. Observational studies on this topic are likely to be affected by confounding environmental factors. The Mendelian randomization (MR) approach addresses these issues by using genetic variants (such as single nucleotide polymorphisms, SNPs) as proxies for the risk factor of interest. We use this technique to explore whether there is a causal effect of age at menarche on time spent in education. Instruments and SNP-age at menarche estimates are identified from a Genome Wide Association Study (GWAS) meta-analysis of 182,416 women of European descent. The effects of instruments on time spent in education are estimated using a GWAS meta-analysis of 118,443 women performed by the Social Science Genetic Association Consortium (SSGAC). In our main analysis, we demonstrate a small but statistically significant causal effect of age at menarche on time spent in education: a 1 year increase in age at menarche is associated with 0.14 years (53 days) increase in time spent in education (95% CI 0.10-0.21 years, p = 3.5 × 10 -8 ). The causal effect is confirmed in sensitivity analyses. In identifying this positive causal effect of age at menarche on time spent in education, we offer further insight into the social effects of puberty in girls.

Time Spent in Home Production Activities by Married Couples and Single Adults with Children.

Science.gov (United States)

Douthitt, Robin A.

1988-01-01

A study found that, over time, married women employed full time have not decreased the time spent working in the home. Married men with young children have increased the time spent on home work. Single parents' time most closely resembled that of married women. (JOW)

Waste Acceptance System Requirements document (WASRD)

International Nuclear Information System (INIS)

1993-01-01

This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

1991 Acceptance priority ranking

International Nuclear Information System (INIS)

1991-12-01

The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

Associations between maternal employment and time spent in nutrition-related behaviours among German children and mothers.

Science.gov (United States)

Möser, Anke; Chen, Susan E; Jilcott, Stephanie B; Nayga, Rodolfo M

2012-07-01

To examine associations between maternal employment and time spent engaging in nutrition-related behaviours among mothers and children using a nationally representative sample of households in West and East Germany. A cross-sectional analysis was performed using time-use data for a sample of mother-child dyads. Associations between maternal employment and time spent in nutrition-related activities such as eating at home, eating away from home and food preparation were estimated using a double-hurdle model. German Time Budget Survey 2001/02. The overall sample included 1071 households with a child between 10 and 17 years of age. The time-use data were collected for a 3 d period of observation (two weekdays and one weekend day). Maternal employment was associated with the time children spent on nutrition-related behaviours. In households with employed mothers, children spent more time eating alone at home and less time eating meals with their mothers. Moreover, employed mothers spent less time on meal preparation compared with non-employed mothers. There were regional differences in time spent on nutrition-related behaviours, such that East German children were more likely to eat at home alone than West German children. Maternal employment was associated with less time spent eating with children and preparing food, which may be related to the increasing childhood obesity rates in Germany. Future national surveys that collect both time-use data and health outcomes could yield further insight into mechanisms by which maternal time use might be associated with health outcomes among children.

Time spent in sedentary activities in a pediatric population in Pretoria Central, South Africa.

Science.gov (United States)

Goon, Daniel T; Nsibambi, Constance A; Chebet, Milton

2016-12-01

Scant information exist on screen time behavior of South Africa children and whether they do not meet the recommendation of American Association of Pediatrics (AAP) concerning screen time activity for children is only speculative. Therefore, the purpose of this study was to examine the time spent in sedentary activities, especially screen time of South African children with regard to gender. This cross-sectional study involved a random sample of 1136 school children (548 boys; 588 girls) aged 9-13 years attending public schools in Central Pretoria, South Africa. Questionnaire was used to collect data on the participants' sedentary behaviors. The prevalence estimates for sedentary time activity was based on the guidelines (i.e., <2 or ≥2 hours per day) of AAP. The mean age of the children was 11.1±1.4 years. Sedentary activity data were collected from 548 boys (48.2%) and 588 (51.8%) girls. The majority of children spent more than two hours per day (exceeding the AAP recommendation for sedentary activity) watching TV (3.0%), worked or played on the computer (25.4%), read (1.0%), played music (27.9%), played board games (14.7%), washing clothes (8.0%), floor sweeping (10.5%), art work (18.2%), and spent time on other unspecified activities (28.6%). Boys spent more time (2 hours, 3-4 hours) watching TV (38.3%; P=0.001), playing computer (31.8 %; P=0.024) and board games (17.4%; P=0.012) than girls. The corresponding figures for girls were 35.7%, 19.2% and 12.5% for TV, computer and board games, respectively. However, the proportion of those who spent more time playing music was higher among girls (32.7%) than boys (22.4%) (P=0.002). Overall, the time spent exceeding AAP recommendation (≥ 2 hours) was not statistically (P=0.427) different between boys and girls. The time spent in sedentary activities, particularly in screen time activity among urban primary school children in Pretoria Central is excessively higher than the recommendation (i.e., ≥2 hours per day

Do Workplace Flexibility Policies Influence Time Spent in Domestic Labor?

Science.gov (United States)

Noonan, Mary C.; Estes, Sarah Beth; Glass, Jennifer L.

2007-01-01

Using data from a U.S. midwestern sample of mothers and fathers, the authors examine whether using workplace flexibility policies alters time spent in housework and child care. They hypothesize that an individual's policy use will lead to more time in domestic labor and that his or her spouse's policy use will lead to less time in domestic labor.…

Spent Fuel in Chile

International Nuclear Information System (INIS)

López Lizana, F.

2015-01-01

The government has made a complete and serious study of many different aspects and possible road maps for nuclear electric power with strong emphasis on safety and energy independence. In the study, the chapter of SFM has not been a relevant issue at this early stage due to the fact that it has been left for later implementation stage. This paper deals with the options Chile might consider in managing its Spent Fuel taking into account foreign experience and factors related to safety, economics, public acceptance and possible novel approaches in spent fuel treatment. The country’s distinctiveness and past experience in this area taking into account that Chile has two research reactors which will have an influence in the design of the Spent Fuel option. (author)

Time Spent on the Internet and Adolescent Blood Pressure

Science.gov (United States)

Cassidy-Bushrow, Andrea E.; Johnson, Dayna A.; Peters, Rosalind M.; Burmeister, Charlotte; Joseph, Christine L. M.

2015-01-01

Internet use is nearly ubiquitous among adolescents. Growing evidence suggests heavy Internet use negatively impacts health, yet the relationship between time spent on the Internet and adolescent blood pressure (BP) is unknown. We examined the association between Internet use and elevated BP in a racially diverse cross-sectional sample of 331…

Development of a water boil-off spent-fuel calorimeter system

International Nuclear Information System (INIS)

Creer, J.M.; Shupe, J.W. Jr.

1981-05-01

A calorimeter system was developed to measure decay heat generation rates of unmodified spent fuel assemblies from commercial nuclear reactors. The system was designed, fabricated, and successfully tested using the following specifications: capacity of one BWR or PWR spent fuel assembly; decay heat generation range 0.1 to 2.5 kW; measurement time of < 12 h; and an accuracy of +-10% or better. The system was acceptance tested using a dc reference heater to simulate spent fuel assembly heat generation rates. Results of these tests indicated that the system could be used to measure heat generation rates between 0.5 and 2.5 kW within +- 5%. Measurements of heat generation rates of approx. 0.1 kW were obtained within +- 15%. The calorimeter system has the potential to permit measurements of heat generation rates of spent fuel assemblies and other devices in the 12- to 14-kW range. Results of calorimetry of a Turkey Point spent fuel assembly indicated that the assembly was generating approx. 1.55 kW

Status of the US foreign research reactor spent nuclear fuel program

International Nuclear Information System (INIS)

Chacey, K.A.; Zeitoun, A.; Saris, E.C.

1997-01-01

A significant step was made in 1996 with the establishment of a new nuclear weapons nonproliferation policy concerning foreign research reactor spent nuclear fuel. Specifically the United States will accept over a 13-year period up to 20 tonnes of spent nuclear fuel from 41 countries. Only spent fuel containing uranium enriched in the United States is covered under this policy. Since the acceptance policy took effect on 13 May 1996, the Department of Energy has undertaken a number of steps to effectively implement the policy. An implementation strategy plan, mitigation action plan, and detailed transportation plans have been developed. Other activities include foreign research reactor assessments, and the determination of shipment priorities and schedules. The first shipment under the acceptance policy was received into the United States in September 1996. A second shipment was received from Canada in December 1996. The next shipment of foreign research reactor spent nuclear fuel is expected from Europe in early March 1997. The primary challenge for DOE is to continue to transport this material in a consistent, cost-effective manner over the 13-year duration of the program. This article covers the following topics: background; acceptance policy; implementation of the acceptance policy; next steps/closing. 6 figs

Spent fuel receipt scenarios study

International Nuclear Information System (INIS)

Ballou, L.B.; Montan, D.N.; Revelli, M.A.

1990-09-01

This study reports on the results of an assignment from the DOE Office of Civilian Radioactive Waste Management to evaluate of the effects of different scenarios for receipt of spent fuel on the potential performance of the waste packages in the proposed Yucca Mountain high-level waste repository. The initial evaluations were performed and an interim letter report was prepared during the fall of 1988. Subsequently, the scope of work was expanded and additional analyses were conducted in 1989. This report combines the results of the two phases of the activity. This study is a part of a broader effort to investigate the options available to the DOE and the nuclear utilities for selection of spent fuel for acceptance into the Federal Waste Management System for disposal. Each major element of the system has evaluated the effects of various options on its own operations, with the objective of providing the basis for performing system-wide trade-offs and determining an optimum acceptance scenario. Therefore, this study considers different scenarios for receipt of spent fuel by the repository only from the narrow perspective of their effect on the very-near-field temperatures in the repository following permanent closure. This report is organized into three main sections. The balance of this section is devoted to a statement of the study objective, a summary of the assumptions. The second section of the report contains a discussion of the major elements of the study. The third section summarizes the results of the study and draws some conclusions from them. The appendices include copies of the waste acceptance schedule and the existing and projected spent fuel inventory that were used in the study. 10 refs., 27 figs

Market driven strategy for acquisition of waste acceptance and transportation services for commercial spent fuel in the United States

International Nuclear Information System (INIS)

Lemeshewky, W.; Macaluso, C.; Smith, P.; Teer, B.

1998-05-01

The Department of Energy has the responsibility for the shipment of spent nuclear fuel (SNF) from commercial reactors to a Federal facility for storage and/or disposal. DOE has developed a strategy for a market driven approach for the acquisition of transportation services and equipment which will maximize the participation of private industry. To implement this strategy, DOE is planning to issue a Request for Proposal (RFP) for the provision of the required services and equipment to accept SNF from the utilities and transport the SNF to a Federal facility. The paper discusses this strategy and describes the RFP

Evaluation of daily time spent in transportation and traffic-influenced microenvironments by urban Canadians.

Science.gov (United States)

Matz, Carlyn J; Stieb, David M; Egyed, Marika; Brion, Orly; Johnson, Markey

2018-01-01

Exposure to traffic and traffic-related air pollution is associated with a wide array of health effects. Time spent in a vehicle, in active transportation, along roadsides, and in close proximity to traffic can substantially contribute to daily exposure to air pollutants. For this study, we evaluated daily time spent in transportation and traffic-influenced microenvironments by urban Canadians using the Canadian Human Activity Pattern Survey (CHAPS) 2 results. Approximately 4-7% of daily time was spent in on- or near-road locations, mainly associated with being in a vehicle and smaller contributions from active transportation. Indoor microenvironments can be impacted by traffic emissions, especially when located near major roadways. Over 60% of the target population reported living within one block of a roadway with moderate to heavy traffic, which was variable with income level and city, and confirmed based on elevated NO 2 exposure estimated using land use regression. Furthermore, over 55% of the target population ≤ 18 years reported attending a school or daycare in close proximity to moderate to heavy traffic, and little variation was observed based on income or city. The results underline the importance of traffic emissions as a major source of exposure in Canadian urban centers, given the time spent in traffic-influenced microenvironments.

Continuing battle on the acceptance of spent fuel: Is there an appropriate remedy?

International Nuclear Information System (INIS)

Silberg, J.E.

1999-01-01

This paper is an outline of a presentation delivered by the author at the INMN Spent Fuel Management Seminar XVI. The topics he covers are: (1) Indiana Michigan Power vs DOE; (2) Northern States Power vs DOE; (3) Post-NSP Developments Before Damage Claims Filed; and (4) Spent Fuel Damages Lawsuits

One approach to accepting and transporting spent fuel from early-generation reactors with short fuel assemblies

International Nuclear Information System (INIS)

Peterson, R.W.; Bentz, E.J. Jr.; Bentz, C.B.

1993-01-01

In the early days of development of commercial nuclear power reactors in the U.S., the overall length and uranium loading of the fuel assemblies were considerably less than those of later generation facilities. In turn, some of these early facilities were designed for handling shorter casks than currently-certified casks. The spent fuel assemblies from these facilities are nearly all standard fuel within the definition in the Standard Contract (10 CFR 961) between the utilities and the U.S. Department of Energy (DOE) (the Big Rock Point fuel cross-section is outside the standard fuel dimension), and the utilities involved hold early delivery rights under DOE's oldest-fuel-first (OFF) allocation scenario. However, development of casks suitable for satisfying the acceptance and transportation requirements of some of these facilities is not currently underway in the DOE Cask System Development Program (CSDP). While the total MTU of these fuels is relatively small compared to the total program, the number of assemblies to be transported is significant, especially in the early years of operation according to the OFF allocation scenario. We therefore perceive a need for DOE to develop an approach and to implement plans to satisfy the unique acceptance and transportation requirements of these facilities. One such approach is outlined below. (author)

Predicting Time Spent in Treatment in a Sample of Danish Survivors of Child Sexual Abuse.

Science.gov (United States)

Fletcher, Shelley; Elklit, Ask; Shevlin, Mark; Armour, Cherie

2017-07-01

The aim of this study was to identify significant predictors of length of time spent in treatment. In a convenience sample of 439 Danish survivors of child sexual abuse, predictors of time spent in treatment were examined. Assessments were conducted on a 6-month basis over a period of 18 months. A multinomial logistic regression analysis revealed that the experience of neglect in childhood and having experienced rape at any life stage were associated with less time in treatment. Higher educational attainment and being male were associated with staying in treatment for longer periods of time. These factors may be important for identifying those at risk of terminating treatment prematurely. It is hoped that a better understanding of the factors that predict time spent in treatment will help to improve treatment outcomes for individuals who are at risk of dropping out of treatment at an early stage.

Exorcising spent fuel transportation using comparative hazard assessment methods

International Nuclear Information System (INIS)

Pennington, Charles W.

2003-01-01

Spent fuel transportation has achieved an exemplary safety record over more than three decades within both the United States (U.S.) and the global community at large. Today, many groups are attempting to precipitate fear of spent fuel transportation within the general public by 'demonizing' this proven technology and by creating a highly charged environment of radiation phobia. The actions of these groups within the U.S. result from the confluence of the terrorist acts of September 11, 2001, and the acceptance by the President and Congress of the U.S. Department of Energy's (DOE) recommendation of Yucca Mountain as the repository site for the disposal of the nation's spent fuel. This paper offers a comparative hazard assessment demonstrating the relative safety of spent fuel transportation in the context of currently accepted practices within society to show that there are no 'demons' associated with spent fuel transportation. The paper provides an assessment of potential population exposures based on more than 25 years of transport cask analysis and testing under beyond-design-basis (BDB) event conditions, including missile attacks, with those from current accepted activities within society that produce high dose exposures to the general public. Over the last quarter of a century, several spent fuel cask test programs have produced data that allow calculation of potential releases and population doses resulting from a terrorist attack. The DOE has used this information to develop projected worst-case population exposures as part of the Final Environmental Impact Statement (FEIS) for the Yucca Mountain repository. The paper discusses these potential releases and population exposures. Additionally, the paper identifies current unregulated activities and practices within societies yielding population exposures that exceed significantly those that would result from such highly hypothetical and improbable events as a terrorist missile attack on a spent fuel

Exorcising spent fuel transportation using comparative hazard assessment methods

Energy Technology Data Exchange (ETDEWEB)

Pennington, Charles W. [NAC international, Norcross (United States)

2003-07-01

Spent fuel transportation has achieved an exemplary safety record over more than three decades within both the United States (U.S.) and the global community at large. Today, many groups are attempting to precipitate fear of spent fuel transportation within the general public by 'demonizing' this proven technology and by creating a highly charged environment of radiation phobia. The actions of these groups within the U.S. result from the confluence of the terrorist acts of September 11, 2001, and the acceptance by the President and Congress of the U.S. Department of Energy's (DOE) recommendation of Yucca Mountain as the repository site for the disposal of the nation's spent fuel. This paper offers a comparative hazard assessment demonstrating the relative safety of spent fuel transportation in the context of currently accepted practices within society to show that there are no 'demons' associated with spent fuel transportation. The paper provides an assessment of potential population exposures based on more than 25 years of transport cask analysis and testing under beyond-design-basis (BDB) event conditions, including missile attacks, with those from current accepted activities within society that produce high dose exposures to the general public. Over the last quarter of a century, several spent fuel cask test programs have produced data that allow calculation of potential releases and population doses resulting from a terrorist attack. The DOE has used this information to develop projected worst-case population exposures as part of the Final Environmental Impact Statement (FEIS) for the Yucca Mountain repository. The paper discusses these potential releases and population exposures. Additionally, the paper identifies current unregulated activities and practices within societies yielding population exposures that exceed significantly those that would result from such highly hypothetical and improbable events as a terrorist missile

Spent fuel management in Canada

International Nuclear Information System (INIS)

Khan, A.; Pattantyus, P.

1999-01-01

The current status of the Canadian spent fuel storage is presented. This includes wet and dry interim storage. Extension of wet interim storage facilities is nor planned, as dry technologies have found wide acceptance. The Canadian nuclear program is sustained by commercial Ontario Hydro CANDU type reactors, since 1971, representing 13600 MW(e) of installed capacity, able to produce 9200 spent fuel bundles (1800 tU) every year, and Hydro Quebec and New Brunswick CANDU reactors each producing 685 MW(e) and about 100 tU of spent fuel annually. The implementation of various interim (wt and dry) storage technologies resulted in simple, dense and low cost systems. Economical factors determined that the open cycle option be adopted for the CANDU type reactors rather that recycling the spent fuel. Research and development activities for immobilization and final disposal of nuclear waste are being undertaken in the Canadian Nuclear Fuel Waste Management Program

Disposal of spent fuel

International Nuclear Information System (INIS)

Blomeke, J.O.; Ferguson, D.E.; Croff, A.G.

1978-01-01

Based on preliminary analyses, spent fuel assemblies are an acceptable form for waste disposal. The following studies appear necessary to bring our knowledge of spent fuel as a final disposal form to a level comparable with that of the solidified wastes from reprocessing: 1. A complete systems analysis is needed of spent fuel disposition from reactor discharge to final isolation in a repository. 2. Since it appears desirable to encase the spent fuel assembly in a metal canister, candidate materials for this container need to be studied. 3. It is highly likely that some ''filler'' material will be needed between the fuel elements and the can. 4. Leachability, stability, and waste-rock interaction studies should be carried out on the fuels. The major disadvantages of spent fuel as a disposal form are the lower maximum heat loading, 60 kW/acre versus 150 kW/acre for high-level waste from a reprocessing plant; the greater long-term potential hazard due to the larger quantities of plutonium and uranium introduced into a repository; and the possibility of criticality in case the repository is breached. The major advantages are the lower cost and increased near-term safety resulting from eliminating reprocessing and the treatment and handling of the wastes therefrom

The independent relationship between trouble controlling Facebook use, time spent on the site and distress.

Science.gov (United States)

Muench, Fredrick; Hayes, Marie; Kuerbis, Alexis; Shao, Sijing

2015-09-01

There is an emerging literature base on the relationship between maladaptive traits and "addiction" to social networking sites. These studies have operationalized addiction as either spending excessive amounts of time on social networking sites (SNS) or trouble controlling SNS use, but have not assessed the unique contribution of each of these constructs on outcomes in the same models. Moreover, these studies have exclusively been conducted with younger people rather than a heterogeneous sample. This study examined the independent relationship of a brief Facebook addiction scale, time spent on Facebook, and Facebook checking on positive and negative social domains, while controlling for self-esteem and social desirability. Participants were recruited using e-mail, SNS posts and through Amazon's MTurk system. The sample included 489 respondents ages from 18 to approximately 70, who completed a 10-15 minute survey. Results indicate that neither time spent on Facebook nor Facebook checking was significantly associated with either self-esteem, fear of negative social evaluation or social comparison, while SNS addiction symptoms were each independently associated with Facebook usage. Neither time spent on Facebook nor SNS addiction symptoms were associated with positive social relationships. Overall results suggest that time on SNS and trouble controlling use should be considered independent constructs and that interventions should target underlying loss of control as the primary intervention target above ego syntonic time spent on the site.

U.S. Department of Energy operational experience with shipments of foreign research reactor spent nuclear fuel

International Nuclear Information System (INIS)

Messick, Charles E.; Massey, Charles D.; Mustin, Tracy P.

1998-01-01

On May 13, 1996, the U.S. Department of Energy issued a Record of Decision on a Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel. The goal of the long-term policy is to recover enriched uranium exported from the United States, while giving foreign research reactor operators sufficient time to develop their own long-term solutions for storage and disposal of spent fuel. The spent fuel accepted by the U.S. DOE under the policy must be out of the research reactors by May 12, 2006 and returned to the United States by May 12, 2009. (author)

Transportation of failed or damaged foreign research reactor spent nuclear fuel

International Nuclear Information System (INIS)

Messick, Charles E.; Mustin, Tracy P.; Massey, Charles D.

1999-01-01

Since initiating the Foreign Research Reactor Spent Nuclear Fuel (FRR SNF) Acceptance Program in 1996, the Program has had to deal with difficult issues associated with the transportation of failed or damaged spent fuel. In several instances, problems with failed or damaged fuel have prevented the acceptance of the fuel at considerable cost to both the Department of Energy and research reactor operators. In response to the problems faced by the Acceptance Program, DOE has undertaken significant steps to better define the spent fuel acceptance criteria. DOE has worked closely with the U.S. Nuclear Regulatory Commission to address failed or damaged research reactor spent fuel causing a degradation of the fuel assembly exposing fuel meat and to identify cask certificate issues which must be resolved by cask owners and foreign regulatory authorities. The specific issues and implementation challenges associated with the transport of MTR type FRR SNF will be discussed. The information presented will include U.S. Nuclear Regulatory Commission regulatory issues, cask certificate issues, technical constraints, implementation status, and lessons learned. Specific information will also be provided on the latest efforts to revise DOE's Appendix B, Transport Package (Cask) Acceptance Criteria. The information presented in this paper will be of interest to foreign research reactor operators, shippers, and cask vendors in evaluating the condition of their fuel to ensure it can be transported in accordance with appropriate cask certificate requirements. (author)

Background and planning requirements for spent fuel shipments to DOE

Energy Technology Data Exchange (ETDEWEB)

Ravenscroft, Norman [Edlow International Company, 1666 Connecticut Avenue, NW, Suite 201, Washington, DC 20009 (United States)

1996-10-01

Information is provided on the planning required and the factors that must be included in the planning process for spent fuel shipments to DOE. A summary is also provided on the background concerning renewal of the DOE spent fuel acceptance policy in May 1996. (author)

Identification and understanding the factors affecting the public and political acceptance of long term storage of spent fuel and high-level radioactive wastes

International Nuclear Information System (INIS)

Gorea, Valica

2006-01-01

In the end of 2004, according to the information available to the IAEA, there were 440 nuclear reactors operating worldwide, with a total net capacity of 366.3 GW(e), 6 of them being connected to the grid in 2004 ( 2 in Ukraine, one each in China, Japan and the Russian Federation and a reconnection in Canada) by comparison with 2 connections and 2 re-connections in 2003. Also, in the end of 2004, 26 nuclear power plants were under construction with a total net capacity of 20.8 GW(e). The conclusion accepted by common consent is that the nuclear power is still in progress and represents one of the options for power security on long and middle term. If we refer to the nuclear fusion which will produce commercial electric power, over 30 - 40 years, in practically unlimited quantities, the above underlining becomes even more evident. Fortunately, besides the beneficent characteristics, such as: clean, stable as engendering and price, has also a negative characteristic, which generally breathes fear into the people: radioactive waste. A classification of the radioactive waste is not the target of this presentation. I just want to point that a nuclear power plant produces during the time spent fuel - long life high radioactive, generating heat. Another high radioactive waste have similar characteristics (HLW = High Level Waste) for which reason these two categories of wastes are treated together. The spent fuel and the High Level Waste are interim stored for cooling, for around 50 years, afterwards it is transferred to the final repository where it will be kept for hundreds of years, in the case of an open fuel cycle and this is also the case of Cernavoda NPP. Taking into consideration that the Cernavoda Unit 1 reaches the age of 10 years of commercial running during December 2006, it results that the issue of the final disposal is not such urgent as it looks. The objectives of long term management of radioactive waste are public health and protection of the environment

Waste acceptance and logistics

International Nuclear Information System (INIS)

Carlson, James H.

1992-01-01

There are three major components which are normally highlighted when the Civilian Radioactive Waste Management Program is discussed - the repository, the monitored retrievable storage facility, and the transportation system. These are clearly the major physical system elements and they receive the greatest external attention. However, there will not be a successful, operative waste management system without fully operational waste acceptance plans and logistics arrangements. This paper will discuss the importance of developing, on a parallel basis to the normally considered waste management system elements, the waste acceptance and logistics arrangements to enable the timely transfer of spent nuclear fuel from more than one hundred and twenty waste generators to the Federal government. The paper will also describe the specific activities the Program has underway to make the necessary arrangements. (author)

Effects of alpha-decay on spent fuel corrosion behaviour

International Nuclear Information System (INIS)

Wiss, T.; Rondinella, V.V.; Cobos, J.; Wegen, D.H.; Amme, M.; Ronchi, C.

2004-01-01

An overview of results in the area of spent fuel characterization as nuclear waste is presented. These studies are focused on primary aspects of spent fuel corrosion, by considering different fuel compositions and burn ups, as well as a wide set of environmental conditions. The key parameter is the storage time of the fuel e.g. in view of spent fuel retrieval or in view of its final disposal. To extrapolate data obtainable from a laboratory-acceptable timescale to those expected after storage periods of interest have elapsed (amounting in the extreme case to geological ages) is a tough challenge. Emphasis is put on key aspects of fuel corrosion related to fuel properties at a given age and environmental conditions expected in the repository: e.g. the fuel activity (radiolysis effects), the effects of helium build-up and of groundwater composition. A wide range of techniques, from traditional leaching experiments to advanced electrochemistry, and of materials, including spent fuel with different compositions/burnups and analogues like the so-called alpha-doped UO 2 , are employed for these studies. The results confirm the safety of European underground repository concepts. (authors)

The independent relationship between trouble controlling Facebook use, time spent on the site and distress

Science.gov (United States)

Muench, Fredrick; Hayes, Marie; Kuerbis, Alexis; Shao, Sijing

2015-01-01

Background and Aims There is an emerging literature base on the relationship between maladaptive traits and “addiction” to social networking sites. These studies have operationalized addiction as either spending excessive amounts of time on social networking sites (SNS) or trouble controlling SNS use, but have not assessed the unique contribution of each of these constructs on outcomes in the same models. Moreover, these studies have exclusively been conducted with younger people rather than a heterogeneous sample. This study examined the independent relationship of a brief Facebook addiction scale, time spent on Facebook, and Facebook checking on positive and negative social domains, while controlling for self-esteem and social desirability. Methods Participants were recruited using e-mail, SNS posts and through Amazon’s MTurk system. The sample included 489 respondents ages from 18 to approximately 70, who completed a 10–15 minute survey. Results Results indicate that neither time spent on Facebook nor Facebook checking was significantly associated with either self-esteem, fear of negative social evaluation or social comparison, while SNS addiction symptoms were each independently associated with Facebook usage. Neither time spent on Facebook nor SNS addiction symptoms were associated with positive social relationships. Discussion Overall results suggest that time on SNS and trouble controlling use should be considered independent constructs and that interventions should target underlying loss of control as the primary intervention target above ego syntonic time spent on the site. PMID:26551906

Interim nuclear spent fuel storage facility - From complete refusal to public acceptance

International Nuclear Information System (INIS)

Kacena, Michal

1998-01-01

Full text: As usual in P.R., there was a complicated, politically sensitive situation we had to face at the beginning and it wasn't easy to create the right P.R. programme with the right targets: CEZ needed a new storage facility for the nuclear spent fuel from its two NPPs - Dukovany and Temelin. Firstly, CEZ preferred to build an on-site facility for the Dukovany NPP to last until the year 2004; secondly, a facility for the Temelin NPP several years later. But the Czech Government decided to limit Dukovany's storage capacity during a public discussion in 1992. Therefore, at the end of 1993, CEZ started the site selection process for a central storage facility targeted at ten regions in the country. In P.R. we decided on two main goals: 1. To gain public acceptance of a central storage facility at least at one site, and hopefully at more. 2. To change public opinion (especially around the Dukovany NPP) in order to create the proper atmosphere for changing the government's decision to limit storage capacity. We wanted to prove that we could choose the fight technical and economical solution without political limits. This obviously presented a challenge as it would be problematic for CEZ to be very visible in the campaign: We wanted people to know that the government had made a bad decision, but we also had to make it clear that our objections were based not on questions of momentary corporate advantage but instead on solid technical grounds. Most would only see self interest. We wanted to show them the facts. Of course, some times it wasn't easy to hit both targets at the same time. There was a lot of hard work in the middle. We gained new experience and we learned a lot trying to get public confidence in nuclear safety, in our company's reliability and in some local profits for a storage site: Firstly none of those regions was excited by the idea o a storage facility in its backyard. Most of them were very strongly and actively against it and did not want to

Associations between Parental and Friend Social Support and Children's Physical Activity and Time Spent outside Playing.

Science.gov (United States)

Loucaides, Constantinos A; Tsangaridou, Niki

2017-01-01

The purpose of this study was to examine the structural validity of a parent and a child questionnaire that assessed parental and friends' influences on children's physical activity and investigate the associations between the derived factors, physical activity, and time spent outside. Children ( N = 154, mean age = 11.7) and 144 of their parents completed questionnaires assessing parental and friends' influences on children's physical activity. Children wore a pedometer for six days. Exploratory factor analyses revealed four factors for the parental and five for the child's questionnaire that explained 66.71% and 63.85% of the variance, respectively. Five factors were significantly associated with physical activity and five significantly associated with time spent outside. Higher correlations were revealed between "general friend support," "friends' activity norms," and physical activity ( r = 0.343 and 0.333 resp., p friend support" and time spent outside ( r = 0.460, p parental and friends' influences on physical activity from both parents and children may provide a more complete picture of influences. Parents and friends seem to influence children's physical activity behavior and time spent outside, but friends' influences may have a stronger impact on children's behaviors.

Spent-fuel storage: a private sector option

International Nuclear Information System (INIS)

Thomas, J.A.; Ross, S.R.

1983-01-01

The investigation was performed to delineate the legal and financial considerations for establishing private sector support for the planning and development of an independent spent-fuel storage facility (ISFSF). The preferred institutional structure was found to be one in which a not-for-profit corporation contracts with a limited partnership to handle the spent fuel. The limited partnership acquires the necessary land and constructs the ISFSF facility and then leases the facility to the not-for-profit corporation, which acquires spent-fuel rods from the utilities. The DOE must agree to purchase the spent-fuel rods at the expiration of term and warrant continued operation of the facility if policy changes at the federal level force the removal of the rods prior to completion of the contracted storage cycle. The DOE planning base estimate of spent-fuel storage requirements indicates a market potential adequate to support 10,000 MTU or more of spent-fuel storage prior to the time a government repository is available to accept spent fuel around the turn of the century. The estimated construction cost of a 5000-MTU water basin facility is $552 million. The total capital requirements to finance such a facility are estimated to be $695 million, based on an assumed capital structure of 70 percent debt and 30 percent equity. The estimated total levelized cost of storage, including operating costs, for the assumed 17-year life of the facility is $223 per kilogram of uranium. This is equivalent to a slightly less than one mill per kilowatt-hour increase in nuclear fuel costs at the nuclear power station that was the source of the spent fuel. In conclusion, within the context of the new Nuclear Waste Policy Act of 1982, the study points to both the need for and the advantages of private sector support for one or more ISFSFs and establishes a workable mechanism for the recovery of the costs of owning and operating such facilities. 3 figures, 4 tables

Grey Literature Searching for Health Sciences Systematic Reviews: A Prospective Study of Time Spent and Resources Utilized.

Science.gov (United States)

Saleh, Ahlam A; Ratajeski, Melissa A; Bertolet, Marnie

To identify estimates of time taken to search grey literature in support of health sciences systematic reviews and to identify searcher or systematic review characteristics that may impact resource selection or time spent searching. A survey was electronically distributed to searchers embarking on a new systematic review. Characteristics of the searcher and systematic review were collected along with time spent searching and what resources were searched. Time and resources were tabulated and resources were categorized as grey or non-grey. Data was analyzed using Kruskal-Wallis tests. Out of 81 original respondents, 21% followed through with completion of the surveys in their entirety. The median time spent searching all resources was 471 minutes, and of those a median of 85 minutes were spent searching grey literature. The median number of resources used in a systematic review search was four and the median number of grey literature sources searched was two. The amount of time spent searching was influenced by whether the systematic review was grant funded. Additionally, the number of resources searched was impacted by institution type and whether systematic review training was received. This study characterized the amount of time for conducting systematic review searches including searching the grey literature, in addition to the number and types of resources used. This may aid searchers in planning their time, along with providing benchmark information for future studies. This paper contributes by quantifying current grey literature search patterns and associating them with searcher and review characteristics. Further discussion and research into the search approach for grey literature in support of systematic reviews is encouraged.

Waste acceptance criteria study: Volume 2, Appendixes: Final report

International Nuclear Information System (INIS)

Johnson, E.R.; McLeod, N.B.; McBride, J.A.

1988-09-01

These appendices to the report on Waste Acceptance Criteria have been published as a separate volume for the convenience of the reader. They consist of the text of the 10CFR961 Contract for disposal of spent fuel, estimates of the cost (savings) to the DOE system of accepting different forms of spent fuel, estimates of costs of acceptance testing/inspection of spent fuel, illustrative specifications and procedures, and the resolution of comments received on a preliminary draft of the report. These estimates of costs contained herein preliminary and are intended only to demonstrate the trends in costs, the order of magnitude involved, and the methodology used to develop the costs. The illustrative specifications and procedures included herein have been developed for the purpose of providing a starting point for the development of a consensus on such matters between utilities and DOE

Nuclear mass inventory, photon dose rate and thermal decay heat of spent research reactor fuel assemblies

International Nuclear Information System (INIS)

Pond, R.B.; Matos, J.E.

1996-05-01

As part of the Department of Energy's spent nuclear fuel acceptance criteria, the mass of uranium and transuranic elements in spent research reactor fuel must be specified. These data are, however, not always known or readily determined. It is the purpose of this report to provide estimates of these data for some of the more common research reactor fuel assembly types. The specific types considered here are MTR, TRIGA and DIDO fuel assemblies. The degree of physical protection given to spent fuel assemblies is largely dependent upon the photon dose rate of the spent fuel material. These data also, are not always known or readily determined. Because of a self-protecting dose rate level of radiation (dose rate greater than 100 ren-x/h at I m in air), it is important to know the dose rate of spent fuel assemblies at all time. Estimates of the photon dose rate for spent MTR, TRIGA and DIDO-type fuel assemblies are given in this report

Multinomial model and zero-inflated gamma model to study time spent on leisure time physical activity: an example of ELSA-Brasil.

Science.gov (United States)

Nobre, Aline Araújo; Carvalho, Marilia Sá; Griep, Rosane Härter; Fonseca, Maria de Jesus Mendes da; Melo, Enirtes Caetano Prates; Santos, Itamar de Souza; Chor, Dora

2017-08-17

To compare two methodological approaches: the multinomial model and the zero-inflated gamma model, evaluating the factors associated with the practice and amount of time spent on leisure time physical activity. Data collected from 14,823 baseline participants in the Longitudinal Study of Adult Health (ELSA-Brasil - Estudo Longitudinal de Saúde do Adulto ) have been analysed. Regular leisure time physical activity has been measured using the leisure time physical activity module of the International Physical Activity Questionnaire. The explanatory variables considered were gender, age, education level, and annual per capita family income. The main advantage of the zero-inflated gamma model over the multinomial model is that it estimates mean time (minutes per week) spent on leisure time physical activity. For example, on average, men spent 28 minutes/week longer on leisure time physical activity than women did. The most sedentary groups were young women with low education level and income. The zero-inflated gamma model, which is rarely used in epidemiological studies, can give more appropriate answers in several situations. In our case, we have obtained important information on the main determinants of the duration of leisure time physical activity. This information can help guide efforts towards the most vulnerable groups since physical inactivity is associated with different diseases and even premature death.

The Relationship between Motivation, Learning Approaches, Academic Performance and Time Spent

Science.gov (United States)

Everaert, Patricia; Opdecam, Evelien; Maussen, Sophie

2017-01-01

Previous literature calls for further investigation in terms of precedents and consequences of learning approaches (deep learning and surface learning). Motivation as precedent and time spent and academic performance as consequences are addressed in this paper. The study is administered in a first-year undergraduate course. Results show that the…

Spent fuel management in Canada

International Nuclear Information System (INIS)

Pattantyus, P.

1998-01-01

The current status of the Canadian Spent Fuel Management is described. This includes wet and dry interim storage, transportation issues and future plans regarding final disposal based on deep underground emplacement in stable granite rock. Extension of wet interim storage facilities is not planned, as dry storage technologies have found wide acceptance. (author)

Achieving the timely receipt of foreign research reactor spent nuclear fuel at the Savannah River site

International Nuclear Information System (INIS)

Brizes, C.M.; Clark, W.D; Thomas, J.; Andes, T.

1998-01-01

The May 1996 Record of Decision on a Proposed Nuclear Weapons Nonproliferation Policy Concerning Foreign Research Reactor Spent Nuclear Fuel states that the United States will accept spent nuclear fuel containing uranium of U.S.-origin from foreign research reactors through the year 2009. The best information available indicates that approximately 13,000 assemblies of Material Test Reactor (MTR) spent nuclear fuel from 29 countries are expected to be shipped to the Savannah River Site during the 13 years of the program. As of July 1998, 1,371 spent nuclear fuel assemblies from 12 foreign research reactors have been received at the SRS. That is, after more than two years of the FRR program (approximately 15 percent of the program time), 11 percent of the total assemblies have been received at SRS. Current projections show that most of the assemblies can be received by 2009, however if some of the eligible, non-participating countries decide to rejoin the program, a bottleneck would occur at the end of the program. Also adding to the potential for the bottleneck is a trend of shipments being moved out in the timeline. The Savannah River Site is working to be proactive in avoiding a bottleneck at the end of the program, but cooperation is required from all program participants to be successful. Activities currently in progress include inventory/information questionnaires, verifying fuel against cask(s) certificate of compliance (C. of C.), and collecting Appendix A information well in advance of shipping the SNF. The inventory/information sheets have been distributed to a select number of reactor facilities in the past, but work is in progress to refine the process. Information requested in the questionnaire includes inventory numbers, preferred shipping dates, and cask preferences. This information allows for improved shipment planning and helps to ensure that we are working to meet the needs of the reactor facilities. Current plans are to send the questionnaires to

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 4. Pacific basin spent fuel logistics system

International Nuclear Information System (INIS)

1978-06-01

This report summarizes the conceptual framework for a Pacific Basin Spent Fuel Logistics System (PBSFLS); and preliminarily describes programatic steps that might be taken to implement such a system. The PBSFLS concept is described in terms of its technical and institutional components. The preferred PBSFLS concept embodies the rationale of emplacing a fuel cycle system which can adjust to the technical and institutional non-proliferation solutions as they are developed and accepted by nations. The concept is structured on the basis of initially implementing a regional spent fuel storage and transportation system which can technically and institutionally accommodate downstream needs for energy recovery and long-term waste management solutions

Spent fuel management strategies in eight countries and applicability to Sweden. Final report

International Nuclear Information System (INIS)

1986-01-01

The spent fuel management activities described in volume 1 are compared in three areas. The first section summarizes the spent fuel management options being followed in each country and compares those options with regard to cost, environmental impact and public acceptability. Next section reviews and compares national policies on nuclear power, spent fuel management and high-level waste disposal and assesses their impact on the development and licensing of nuclear power plants. The third section compares the regulatory requirements affecting spent fuel managementin terms of their overall spirit and characteristics and in terms of the responsibilities of the utilities and the regulatory authorities. Finally, the last section addresses the applicability to Sweden of the findings from these comparisons, focusing on cost efficiency, health and safety, environmental impact, public acceptance and licensing procedures

Time's up. descriptive epidemiology of multi-morbidity and time spent on health related activity by older Australians: a time use survey.

Directory of Open Access Journals (Sweden)

Tanisha Jowsey

Full Text Available Most Western health systems remain single illness orientated despite the growing prevalence of multi-morbidity. Identifying how much time people with multiple chronic conditions spend managing their health will help policy makers and health service providers make decisions about areas of patient need for support. This article presents findings from an Australian study concerning the time spent on health related activity by older adults (aged 50 years and over, most of whom had multiple chronic conditions. A recall questionnaire was developed, piloted, and adjusted. Sampling was undertaken through three bodies; the Lung Foundation Australia (COPD sub-sample, National Diabetes Services Scheme (Diabetes sub-sample and National Seniors Australia (Seniors sub-sample. Questionnaires were mailed out during 2011 to 10,600 older adults living in Australia. 2540 survey responses were received and analysed. Descriptive analyses were completed to obtain median values for the hours spent on each activity per month. The mean number of chronic conditions was 3.7 in the COPD sub-sample, 3.4 in the Diabetes sub-sample and 2.0 in the NSA sub-sample. The study identified a clear trend of increased time use associated with increased number of chronic conditions. Median monthly time use was 5-16 hours per month overall for our three sub-samples. For respondents in the top decile with five or more chronic conditions the median time use was equivalent to two to three hours per day, and if exercise is included in the calculations, respondents spent from between five and eight hours per day: an amount similar to full-time work. Multi-morbidity imposes considerable time burdens on patients. Ageing is associated with increasing rates of multi-morbidity. Many older adults are facing high demands on their time to manage their health in the face of decreasing energy and mobility. Their time use must be considered in health service delivery and health system reform.

Birth weight and time spent in outdoor physical activity during adolescence.

Science.gov (United States)

Gopinath, Bamini; Hardy, Louise L; Baur, Louise A; Burlutsky, George; Mitchell, Paul

2013-03-01

We investigated the association between birth parameters (weight, length, and head circumference) and time spent in physical activity (outdoor and indoor) and screen time (TV viewing, computer, and videogame usage) among adolescents. A longitudinal cohort study surveyed 1794 children in 2004-2005 (median age = 12.7 yr), and 752 were resurveyed 5 yr later in 2009-2010 (age = 17-18 yr). Adolescents completed detailed activity questionnaires. Parents extracted birth parameter data from their child's health record booklet. After adjusting for age, sex, ethnicity, gestational age, parental education, home ownership, exposure to passive smoking, and body mass index, 12-yr-old children in the highest compared with the lowest quartile of birth weight spent on average approximately 56 and 62 min more in total (Ptrend = 0.02) and outdoor physical activity (Ptrend = 0.02) per week, respectively. Similarly, 12-yr-old children in the high (>4000 g) versus very low (adolescence. Hence, this could be part of the underlying mechanism between prenatal influences and future disease risk and could have possible clinical implications.

Multinomial model and zero-inflated gamma model to study time spent on leisure time physical activity: an example of ELSA-Brasil

Directory of Open Access Journals (Sweden)

Aline Araújo Nobre

2017-08-01

Full Text Available ABSTRACT OBJECTIVE To compare two methodological approaches: the multinomial model and the zero-inflated gamma model, evaluating the factors associated with the practice and amount of time spent on leisure time physical activity. METHODS Data collected from 14,823 baseline participants in the Longitudinal Study of Adult Health (ELSA-Brasil – Estudo Longitudinal de Saúde do Adulto have been analysed. Regular leisure time physical activity has been measured using the leisure time physical activity module of the International Physical Activity Questionnaire. The explanatory variables considered were gender, age, education level, and annual per capita family income. RESULTS The main advantage of the zero-inflated gamma model over the multinomial model is that it estimates mean time (minutes per week spent on leisure time physical activity. For example, on average, men spent 28 minutes/week longer on leisure time physical activity than women did. The most sedentary groups were young women with low education level and income CONCLUSIONS The zero-inflated gamma model, which is rarely used in epidemiological studies, can give more appropriate answers in several situations. In our case, we have obtained important information on the main determinants of the duration of leisure time physical activity. This information can help guide efforts towards the most vulnerable groups since physical inactivity is associated with different diseases and even premature death.

Storage of LWR spent fuel in air: Volume 1: Design and operation of a spent fuel oxidation test facility

International Nuclear Information System (INIS)

Thornhill, C.K.; Campbell, T.K.; Thornhill, R.E.

1988-12-01

This report describes the design and operation and technical accomplishments of a spent-fuel oxidation test facility at the Pacific Northwest Laboratory. The objective of the experiments conducted in this facility was to develop a data base for determining spent-fuel dry storage temperature limits by characterizing the oxidation behavior of light-water reactor (LWR) spent fuels in air. These data are needed to support licensing of dry storage in air as an alternative to spent-fuel storage in water pools. They are to be used to develop and validate predictive models of spent-fuel behavior during dry air storage in an Independent Spent Fuel Storage Installation (ISFSI). The present licensed alternative to pool storage of spent fuel is dry storage in an inert gas environment, which is called inerted dry storage (IDS). Licensed air storage, however, would not require monitoring for maintenance of an inert-gas environment (which IDS requires) but does require the development of allowable temperature limits below which UO 2 oxidation in breached fuel rods would not become a problem. Scoping tests at PNL with nonirradiated UO 2 pellets and spent-fuel fragment specimens identified the need for a statistically designed test matrix with test temperatures bounding anticipated maximum acceptable air-storage temperatures. This facility was designed and operated to satisfy that need. 7 refs

Market driven strategy for acquisition of waste acceptance and transportation services for commercial spent fuel in the united states

International Nuclear Information System (INIS)

Lemeshewsky, W.; Macaluso, C.; Smith, P.; Teer, B.

1998-01-01

The Office of Civilian Radioactive Waste Management (OCRWM) in the United States Department of Energy (DOE) has the responsibility under the Nuclear Waste Policy Act of 1982 (the Act) for the shipment of spent nuclear fuel (SNF) from commercial reactors to a Federal facility for storage and/or disposal. The Act requires the use of private industry to the 'fullest extent possible' in the transportation of spent fuels. An OCRWM goal is to develop a safe, efficient and effective transportation system while meeting the mandate of the Act. OCRWM has then develop a strategy for a market driven approach for the acquisition of transportation services and equipment. To implement this strategy, OCRWM is planning to issue a Request for Proposal (RPF) for the provision of the required services and equipment to accept SNF from the utilities and transport the SNF to a Federal facility. Two draft RPFs have been issued with the second draft incorporating comments on the first draft from potential contractors and other interested parties. The overall strategy as outlined in the draft RPF relies on private industry to use the innovative powers of the marketplace to help DOE accomplish its mission objectives. DOE intends to pursue this procurement strategy whether or not the OCRWM program includes interim storage. The concept described in the draft RPF provides for DOE to purchase services and equipment from a contractor-operated waste acceptance and transportation organization. The contractor is expected to provide initial financing for the project including that necessary for initial acquisition of operational equipment, establish the necessary management organization, and mobilize the necessary resources and capabilities to provide the SNF delivery services at a fixed rate. DOE will retain final approval on all routes and maintain primary responsibility to the States, tribes, and local units of government for assuring appropriate interaction and consideration of their input on

Associations between Parental and Friend Social Support and Children’s Physical Activity and Time Spent outside Playing

Directory of Open Access Journals (Sweden)

Constantinos A. Loucaides

2017-01-01

Full Text Available The purpose of this study was to examine the structural validity of a parent and a child questionnaire that assessed parental and friends’ influences on children’s physical activity and investigate the associations between the derived factors, physical activity, and time spent outside. Children (N=154, mean age = 11.7 and 144 of their parents completed questionnaires assessing parental and friends’ influences on children’s physical activity. Children wore a pedometer for six days. Exploratory factor analyses revealed four factors for the parental and five for the child’s questionnaire that explained 66.71% and 63.85% of the variance, respectively. Five factors were significantly associated with physical activity and five significantly associated with time spent outside. Higher correlations were revealed between “general friend support,” “friends’ activity norms,” and physical activity (r=0.343 and 0.333 resp., p<0.001 and between “general friend support” and time spent outside (r=0.460, p<0.001. Obtaining information relating to parental and friends’ influences on physical activity from both parents and children may provide a more complete picture of influences. Parents and friends seem to influence children’s physical activity behavior and time spent outside, but friends’ influences may have a stronger impact on children’s behaviors.

MANAGEMENT OF RESEARCH AND TEST REACTOR ALUMINUM SPENT NUCLEAR FUEL - A TECHNOLOGY ASSESSMENT

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

2010-07-11

The Department of Energy's Environmental Management (DOE-EM) Program is responsible for the receipt and storage of aluminum research reactor spent nuclear fuel or used fuel until ultimate disposition. Aluminum research reactor used fuel is currently being stored or is anticipated to be returned to the U.S. and stored at DOE-EM storage facilities at the Savannah River Site and the Idaho Nuclear Technology and Engineering Center. This paper assesses the technologies and the options for safe transportation/receipt and interim storage of aluminum research reactor spent fuel and reviews the comprehensive strategy for its management. The U.S. Department of Energy uses the Appendix A, Spent Nuclear Fuel Acceptance Criteria, to identify the physical, chemical, and isotopic characteristics of spent nuclear fuel to be returned to the United States under the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program. The fuel is further evaluated for acceptance through assessments of the fuel at the foreign sites that include corrosion damage and handleability. Transport involves use of commercial shipping casks with defined leakage rates that can provide containment of the fuel, some of which are breached. Options for safe storage include wet storage and dry storage. Both options must fully address potential degradation of the aluminum during the storage period. This paper focuses on the various options for safe transport and storage with respect to technology maturity and application.

Nuclear nonproliferation: Concerns with US delays in accepting foregin research reactors' spent fuel

International Nuclear Information System (INIS)

1994-01-01

One key US nonproliferation goal is to discourage use of highly enriched uranium fuel (HEU), which can be used to make nuclear bombs, in civilian nuclear programs worldwide. DOE's Off-Site Fuels Policy for taking back spent HEU from foreign research reactors was allowed to expire due to environmental reasons. This report provides information on the effects of delays in renewing the Off-Site Fuels Policy on US nonproliferation goals and programs (specifically the reduced enrichment program), DOE's efforts to renew the fuels policy, and the price to be charged to the operators of foreign reactors for DOE's activities in taking back spent fuel

Spent fuels program

International Nuclear Information System (INIS)

Shappert, L.B.

1983-01-01

The goal of this task is to support the Domestic Spent Fuel Storage Program through studies involving the transport of spent fuel. A catalog was developed to provide authoritative, timely, and accessible transportation information for persons involved in the transport of irradiated reactor fuel. The catalog, drafted and submitted to the Transportation Technology Center, Sandia National Laboratories, for their review and approval, covers such topics as federal, state, and local regulations, spent fuel characteristics, cask characteristics, transportation costs, and emergency response information

Automated methods for real-time analysis of spent-fuel measurement data

International Nuclear Information System (INIS)

Bosler, G.E.; Rinard, P.M.; Klosterbuer, S.F.; Painter, J.

1988-01-01

Software has been developed for ''real-time'' analysis of neutron and gamma data from GRAND-1/fork measurements on spent-fuel assemblies. Three modules compose the software package. The modules are linked through a database system of files. The first module is part of a general data-base processing code. This module prepares input data files with inventory and correction-factor information for the second module. The second module, called OLAF, operates on a computer attached to the GRAND-1 electronics unit. In this second module, neutron and gamma data from spent-fuel assemblies are analyzed to verify consistency in the facility operator declarations for exposure (burnup) and cooling time. From the analysis, potential discrepancies in the measurement data are questioned while equipment is still installed at the facility and is available for additional measurements. During the measurements, data are written to an output file, called a results file, which can be processed by the third module of the software package. In the third module, printed reports summarizing the data and results are prepared, and neutron and gamma data are written to files that are process by the Deming curve-fitting code

Encapsulating spent nuclear fuel

International Nuclear Information System (INIS)

Fleischer, L.R.; Gunasekaran, M.

1979-01-01

A system is described for encapsulating spent nuclear fuel discharged from nuclear reactors in the form of rods or multi-rod assemblies. The rods are completely and contiguously enclosed in concrete in which metallic fibres are incorporated to increase thermal conductivity and polymers to decrease fluid permeability. This technique provides the advantage of acceptable long-term stability for storage over the conventional underwater storage method. Examples are given of suitable concrete compositions. (UK)

The Effect of Prior Knowledge on Price Acceptability and the Type of Information Examined.

OpenAIRE

Rao, Akshay R; Sieben, Wanda A

1992-01-01

This article assesses whether differences in prior knowledge result in differences in (1) price acceptability and (2) the extent to which different types of information are examined. Using a personal computer-based methodology, subjects who varied in their prior product knowledge provided price responses, and the time they spent examining various kinds of information was measured. Acceptable price-range and points (price limits) were found to be lowest for low-knowledge subjects. Further, the...

Memorandum of Understanding Completion and Acceptance of the Spent Nuclear Fuel Project

International Nuclear Information System (INIS)

NISHIKAWA, L.D.

1999-01-01

This Memorandum of Understanding (MOU) is written to provide clear direction with respect to roles, responsibilities, obligations, and expectations of each organization identified. It functions as an agreement between the Operations, Construction Projects and Startup Organizations within the Spent Nuclear Fuels Project

Spent fuel reprocessing options

International Nuclear Information System (INIS)

2008-08-01

The objective of this publication is to provide an update on the latest developments in nuclear reprocessing technologies in the light of new developments on the global nuclear scene. The background information on spent fuel reprocessing is provided in Section One. Substantial global growth of nuclear electricity generation is expected to occur during this century, in response to environmental issues and to assure the sustainability of the electrical energy supply in both industrial and less-developed countries. This growth carries with it an increasing responsibility to ensure that nuclear fuel cycle technologies are used only for peaceful purposes. In Section Two, an overview of the options for spent fuel reprocessing and their level of development are provided. A number of options exist for the treatment of spent fuel. Some, including those that avoid separation of a pure plutonium stream, are at an advanced level of technological maturity. These could be deployed in the next generation of industrial-scale reprocessing plants, while others (such as dry methods) are at a pilot scale, laboratory scale or conceptual stage of development. In Section Three, research and development in support of advanced reprocessing options is described. Next-generation spent fuel reprocessing plants are likely to be based on aqueous extraction processes that can be designed to a country specific set of spent fuel partitioning criteria for recycling of fissile materials to advanced light water reactors or fast spectrum reactors. The physical design of these plants must incorporate effective means for materials accountancy, safeguards and physical protection. Section four deals with issues and challenges related to spent fuel reprocessing. The spent fuel reprocessing options assessment of economics, proliferation resistance, and environmental impact are discussed. The importance of public acceptance for a reprocessing strategy is discussed. A review of modelling tools to support the

Maternal employment, acculturation, and time spent in food-related behaviors among Hispanic mothers in the United States. Evidence from the American Time Use Survey.

Science.gov (United States)

Sliwa, Sarah A; Must, Aviva; Peréa, Flavia; Economos, Christina D

2015-04-01

Employment is a major factor underlying im/migration patterns. Unfortunately, lower diet quality and higher rates of obesity appear to be unintended consequences of moving to the US. Changes in food preparation practices may be a factor underlying dietary acculturation. The relationships between employment, acculturation, and food-related time use in Hispanic families have received relatively little attention. We used cross-sectional data collected from Hispanic mothers (ages 18-65) with at least one child employment, acculturation (US-born vs. im/migrant), and time spent in food preparation and family dinner. Regression models were estimated separately for the employed and the non-working and were adjusted for Hispanic origin group, socio-demographic and household characteristics. Working an eight-hour day was associated with spending 38 fewer minutes in food preparation (-38.0 ± SE 4.8, p < 001). Although being US-born was associated with spending fewer minutes in food preparation, this relationship varied by origin group. Acculturation did not appear to modify the relationship between hours worked and time spent in food preparation or family dinner. Mothers who worked late hours spent less time eating the evening meal with their families (-9.8 ± SE 1.3). Although an eight-hour workday was associated with a significant reduction in food preparation time, an unexpected result is that, for working mothers, additional time spent in paid work is not associated with the duration of family dinner later that day. Copyright © 2014 Elsevier Ltd. All rights reserved.

How do passion for video games and needs frustration explain time spent gaming?

Science.gov (United States)

Mills, Devin J; Milyavskaya, Marina; Mettler, Jessica; Heath, Nancy L; Derevensky, Jeffrey L

2018-04-01

Research applying self-determination theory and the dualistic model of passion (DMP) has shown video games may satisfy basic psychological needs (i.e., competence, autonomy, and relatedness) and be identified as a passion. The DMP distinguishes between healthy or harmonious passion and problematic or obsessive passion (OP), with the latter reflecting an overreliance towards one's passion to obtain needs satisfaction. The experience of daily obstructions to needs satisfaction, or needs frustration (NF), may facilitate such an overreliance. This study explored how NF and both types of passion explain the amount of time that university students spend gaming. The overall association between NF and time spent gaming was not significant. However, for video game users with low levels of OP for gaming, there was a significant negative association between NF and time spent gaming. Additionally, evidence of a mutually reinforcing association between NF and OP for gaming indicates that a vicious cycle exists, whereby a strong OP for gaming predicts and is reinforced by greater NF. The theoretical implications are discussed. © 2018 The British Psychological Society.

Development of a water boil-off spent-fuel calorimeter system. [To measure decay heat generation rate

Energy Technology Data Exchange (ETDEWEB)

Creer, J.M.; Shupe, J.W. Jr.

1981-05-01

A calorimeter system was developed to measure decay heat generation rates of unmodified spent fuel assemblies from commercial nuclear reactors. The system was designed, fabricated, and successfully tested using the following specifications: capacity of one BWR or PWR spent fuel assembly; decay heat generation range 0.1 to 2.5 kW; measurement time of < 12 h; and an accuracy of +-10% or better. The system was acceptance tested using a dc reference heater to simulate spent fuel assembly heat generation rates. Results of these tests indicated that the system could be used to measure heat generation rates between 0.5 and 2.5 kW within +- 5%. Measurements of heat generation rates of approx. 0.1 kW were obtained within +- 15%. The calorimeter system has the potential to permit measurements of heat generation rates of spent fuel assemblies and other devices in the 12- to 14-kW range. Results of calorimetry of a Turkey Point spent fuel assembly indicated that the assembly was generating approx. 1.55 kW.

Advancing the Fork detector for quantitative spent nuclear fuel verification

Science.gov (United States)

Vaccaro, S.; Gauld, I. C.; Hu, J.; De Baere, P.; Peterson, J.; Schwalbach, P.; Smejkal, A.; Tomanin, A.; Sjöland, A.; Tobin, S.; Wiarda, D.

2018-04-01

The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations. A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This paper describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms

Factors impacting time to acceptance and publication for peer-reviewed publications.

Science.gov (United States)

Toroser, Dikran; Carlson, Janice; Robinson, Micah; Gegner, Julie; Girard, Victoria; Smette, Lori; Nilsen, Jon; O'Kelly, James

2017-07-01

Timely publication of data is important for the medical community and provides a valuable contribution to data disclosure. The objective of this study was to identify and evaluate times to acceptance and publication for peer-reviewed manuscripts, reviews, and letters to the editor. Key publication metrics for published manuscripts, reviews, and letters to the editor were identified by eight Amgen publications professionals. Data for publications submitted between 1 January 2013 and 1 November 2015 were extracted from a proprietary internal publication-tracking database. Variables included department initiating the study, publication type, number of submissions per publication, and the total number of weeks from first submission to acceptance, online publication, and final publication. A total of 337 publications were identified, of which 300 (89%) were manuscripts. Time from submission to acceptance and publication was generally similar between clinical and real-world evidence (e.g. observational and health economics studies) publications. Median (range) time from first submission to acceptance was 23.4 (0.2-226.2) weeks. Median (range) time from first submission to online (early-release) publication was 29.7 (2.4-162.6) weeks. Median (range) time from first submission to final (print) publication was 36.2 (2.8-230.8) weeks. Time from first submission to acceptance, online publication, and final publication increased accordingly with number of submissions required for acceptance, with similar times noted between each subsequent submission. Analysis of a single-company publication database showed that the median time for manuscripts to be fully published after initial submission was 36.2 weeks, and time to publication increased accordingly with the number of submissions. Causes for multiple submissions and time from clinical trial completion to first submission were not assessed; these were limitations of the study. Nonetheless, publication planners should consider

Parent Perceptions of Time Spent Meaningfully by Young Adults with Pervasive Support Needs

Science.gov (United States)

Rossetti, Zachary; Lehr, Donna; Lederer, Leslie; Pelerin, Dana; Huang, Shuoxi

2015-01-01

This article describes a qualitative study that examined how 23 young adults with pervasive support needs and limited functional communication spent their time and how their parents (n = 23) and direct support professionals (DSPs; n = 2) defined meaningfulness in relation to the young adults' experiences. Data were collected through…

Spent nuclear fuel discharges from US reactors 1993

International Nuclear Information System (INIS)

1995-02-01

The Energy Information Administration (EIA) of the U.S. Department of Energy (DOE) administers the Nuclear Fuel Data Survey, Form RW-859. This form is used to collect data on fuel assemblies irradiated at commercial nuclear reactors operating in the United States, and the current inventories and storage capacities of those reactors. These data are important to the design and operation of the equipment and facilities that DOE will use for the future acceptance, transportation, and disposal of spent fuels. The data collected and presented identifies trends in burnup, enrichment, and spent nuclear fuel discharged form commercial light-water reactor as of December 31, 1993. The document covers not only spent nuclear fuel discharges; but also site capacities and inventories; canisters and nonfuel components; and assembly type characteristics

Transportation 2000. Spent fuel transportation trends in the new millenium

International Nuclear Information System (INIS)

Blee, David; Viebrock, James; Patterson, John

1999-01-01

The paper will provide a comparison of foreign research reactor spent fuel transportation today verses the assumptions used by the Department of Energy in the Environmental Impact Statement. In addition, it will suggest changes that are likely to occur in transportation logistics through the remainder of the U.S. spent fuel returns program. Cask availability, certification status, shipment strategy, cost issues, and public acceptance are among the topical areas that will be examined. Transportation requirements will be assessed in light of current participation in the returns program and the tendency for shipment plans to shift toward spent fuel return toward the end of the 13 year period of eligibility. (author)

Determination of burnup, cooling time and initial enrichment of PWR spent fuel by use of gamma-ray activity ratios

International Nuclear Information System (INIS)

Min, D.K.; Park, H.J.; Park, K.J.; Ro, S.G.; Park, H.S.

1999-01-01

The Korea Atomic Energy Institute has been developing the algorithms for sequential determination of cooling time, initial enrichment and burnup of the PWR spent fuel assembly by use of gamma ratio measurements, i.e. 134 Cs/ 137 Cs, 154 Eu/ 137 Cs and 106 Ru 137 Cs/( 134 Cs) 2 . Calculations were performed by applying the ORIGEN-S code. This method has advantages over combination techniques of neutron and gamma measurement, because of its simplicity and insensitivity to the measurement geometry. For verifying the algorithms an experiment for determining the cooling time, initial enrichment and burnup of the two PWR spent fuel rods was conducted by use of high-resolution gamma detector (HPGe) system only. This paper describes the method used and interim results of the experiment. This method can be applied for spent fuel characterization, burnup credit and safeguards of the spent fuel management facility

Dissolution rates of aluminum-based spent fuels relevant to geological disposal

International Nuclear Information System (INIS)

Mickalonis, J.I.

2000-01-01

The Department of Energy is pursuing the option of direct disposal of a wide variety of spent nuclear fuels under its jurisdiction. Characterization of the various types of spent fuel is required prior to licensing by the Nuclear Regulatory Commission and acceptance of the fuel at a repository site. One category of required data is the expected rate of radionuclide and fissile release to the environment as a result of exposure to groundwater after closure of the repository. To provide this type of data for four different aluminum-based spent fuels, tests were conducted using a flow through method that allows the dissolution rate of the spent fuel matrix to be measured without interference by secondary precipitation reactions that would muddle interpretation of the results. Similar tests had been conducted earlier with light water reactor spent fuel, thereby allowing direct comparisons

Spent fuel storage capacities. An update of DOE/RL-84-1

International Nuclear Information System (INIS)

1985-10-01

Spent fuel storage capacities at some commercial light water reactors (LWRs) are inadequate to handle projected spent fuel discharges. This report presents estimates of potential near-term requirements for additional LWR spent fuel storage capacity, based on information supplied by utilities operating commercial nuclear power plants. These estimates provide information needed for planning the Department of Energy's (DOE) activities to be carried out under the DOE's Commercial Spent Fuel Management (CSFM) Program, in conjunction with the requirements of the Nuclear Waste Policy Act of 1982. The estimates in this report cover the period from the present through the year 2000. Although the DOE objective is to begin accepting spent fuel for final disposal in 1998, types of fuel and the receipt rates to be shipped are not yet known. Hence, this report makes no assumption regarding such fuel shipments. The resport also assesses the possible impacts of increased fuel exposure and spent fuel transhipment on the requirements for additional storage capacity

A study on the frequency of participation and time spent on sport in different organisational settings

NARCIS (Netherlands)

Borgers, J.; Breedveld, K.; Tienen-Raaphorst, A.; Thibaut, E.; Vandermeerschen, H.; Vos, S.B.; Scheerder, J.

2016-01-01

Research question: As a result of the expansion of opportunities for leisure-time sport participation (LTSP), the question arises if differing organisational settings relate to differences in participation behaviour. This paper compares participation frequency and time spent on sport between

Synthetic seismic acceleration time-histories and their acceptance criteria

International Nuclear Information System (INIS)

Xu Hong

1996-01-01

In seismic dynamic response analysis of structures and equipment, time-history analysis is now widely used. The 3-D seismic acceleration time-histories or 3-D seismic displacement time-histories are required in the 3-D seismic dynamic response analysis as the seismic excitation input data. Because of the lack of actual acceleration time-histories for the field where the structures or equipment are installed, the general practice is to use the synthetic seismic acceleration time-histories, which are derived from the design seismic response spectra of the field, as the seismic excitation input data. However, from one specified design response spectrum indefinite solutions of acceleration time-histories can be derived depending on the values of the input parameters. Not all the derived synthetic time-histories can be used as seismic excitation input data. Only those which meet the acceptance criteria can be used. The factors (input parameters), which will affect the time-history solution from a specified seismic response spectrum, and the acceptance criteria are discussed

Spent nuclear fuel storage - Basic concept

International Nuclear Information System (INIS)

Krempel, Ascanio; Santos, Cicero D. Pacifici dos; Sato, Heitor Hitoshi; Magalhaes, Leonardo de

2009-01-01

According to the procedures adopted in others countries in the world, the spent nuclear fuel elements burned to produce electrical energy in the Brazilian Nuclear Power Plant of Angra do Reis, Central Nuclear Almirante Alvaro Alberto - CNAAA will be stored for a long time. Such procedure will allow the next generation to decide how they will handle those materials. In the future, the reprocessing of the nuclear fuel assemblies could be a good solution in order to have additional energy resource and also to decrease the volume of discarded materials. This decision will be done in the future according to the new studies and investigations that are being studied around the world. The present proposal to handle the nuclear spent fuel is to storage it for a long period of time, under institutional control. Therefore, the aim of this paper is to introduce a proposal of a basic concept of spent fuel storage, which involves the construction of a new storage building at site, in order to increase the present storage capacity of spent fuel assemblies in CNAAA installation; the concept of the spent fuel transportation casks that will transfer the spent fuel assemblies from the power plants to the Spent Fuel Complementary Storage Building and later on from this building to the Long Term Intermediate Storage of Spent Fuel; the concept of the spent fuel canister and finally the basic concept of the spent fuel long term storage. (author)

The Effects of Employment Status and Daily Stressors on Time Spent on Daily Household Chores in Middle-Aged and Older Adults

Science.gov (United States)

Wong, Jen D.; Almeida, David M.

2013-01-01

Purpose of the study: This study examines how employment status (worker vs. retiree) and life course influences (age, gender, and marital status) are associated with time spent on daily household chores. Second, this study assesses whether the associations between daily stressors and time spent on daily household chores differ as a function of…

BR-100 spent fuel shipping cask development

International Nuclear Information System (INIS)

McGuinn, E.J.; Childress, P.C.

1990-01-01

Continued public acceptance of commercial nuclear power is contingent to a large degree on the US Department of Energy (DOE) establishing an integrated waste management system for spent nuclear fuel. As part of the from-reactor transportation segment of this system, the B ampersand W Fuel Company (BWFC) is under contract to the DOE to develop a spent-fuel cask that is compatible with both rail and barge modes of transportation. Innovative design approaches were the keys to achieving a cask design that maximizes payload capacity and cask performance. The result is the BR-100, a 100-ton rail/barge cask with a capacity of 21 PWR or 52 BWR ten-year cooled, intact fuel assemblies. 3 figs

Research reactor spent fuel management in Argentina

International Nuclear Information System (INIS)

Audero, M.A.; Bevilacqua, A.M.; Mehlich, A.M.; Novara, O.

2002-01-01

The research reactor spent fuel (RRSF) management strategy will be presented as well as the interim storage experience. Currently, low-enriched uranium RRSF is in wet interim storage either at reactor site or away from reactor site in a centralized storage facility. High-enriched uranium RRSF from the centralized storage facility has been sent to the USA in the framework of the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program. The strategy for the management of the RRSF could implement the encapsulation for interim dry storage. As an alternative to encapsulation for dry storage some conditioning processes are being studied which include decladding, isotopic dilution, oxidation and immobilization. The immobilized material will be suitable for final disposal. (author)

Heart rate biofeedback fails to enhance children's ability to identify time spent in moderate to vigorous physical activity.

Science.gov (United States)

Conley, Marguerite M; Gastin, Paul B; Brown, Helen; Shaw, Christine

2011-03-01

Physical activity recommendations for children in several countries advise that all young people should accumulate at least 60 min of moderate to vigorous physical activity every day. Perceiving physical activity intensity, however, can be a difficult task for children and it is not clear whether children can identify their levels of moderate to vigorous physical activity in accordance with the recommended guidelines. This study aimed to (1) explore whether children can identify time spent in moderate to vigorous physical activity; and (2) investigate whether heart rate biofeedback would improve children's ability to estimate time spent in moderate to vigorous physical activity. Thirty seven children (15 boys and 22 girls, mean age 12.6 years) wore data recording Polar E600 heart rate monitors during eight physical education lessons. At the end of each lesson children's estimated time in zone was compared to their actual time in zone. During a six lesson Intervention phase, one class was assigned to a biofeedback group whilst the other class acted as the control group and received no heart rate biofeedback. Post-Intervention, students in the biofeedback group were no better than the control group at estimating time spent in zone (mean relative error of estimation biofeedback group: Pre-Intervention 41±32% to Post-Intervention 28±26%; control group: Pre-Intervention 40±39% to Post-Intervention 31±37%). Thus it seems that identifying time spent in moderate to vigorous physical activity remains a complex task for children aged 11-13 even with the help of heart rate biofeedback. Copyright © 2010 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Status of spent fuel storage facilities in Switzerland

International Nuclear Information System (INIS)

Beyeler, P.C.; Lutz, H.R.; Heesen, W. von

1999-01-01

Planning of a dry spent fuel storage facility in Switzerland started already 15 years ago. The first site considered for a central interim storage facility was the cavern of the decommissioned pilot nuclear plant at Lucens in the French-speaking part of Switzerland. This project was terminated in the late eighties because of lack of public acceptance. The necessary acceptance was found in the small town of Wuerenlingen which has hosted for many years the Swiss Reactor Research Centre. The new project consists of centralised interim storage facilities for all types of radioactive waste plus a hot cell and a conditioning and incinerating facility. It represents a so-called integrated storage solution. In 1990, the new company 'ZWILAG Zwischenlager Wuerenlingen AG' (ZWILAG) was founded and the licensing procedures according to the Swiss Atomic law were initiated. On August 26, 1996 ZWILAG got the permit for construction of the whole facility including the operating permit for the storage facilities. End of construction and commissioning are scheduled for autumn 1999. The nuclear power station Beznau started planning a low level waste and spent fuel storage facility on its own, because in 1990 its management thought that by 1997 the first high active waste from the reprocessing facilities in France would have to be taken back. This facility at the Beznau site, called ZWIBEZ, was licensed according to a shorter procedure so its construction was finished by 1997. The two facilities for high level waste and spent fuel provide space for a total of 278 casks, which is sufficient for the waste and spent fuel of the four Swiss nuclear power stations including their life extension programme. (author)

Eye movements discriminate fatigue due to chronotypical factors and time spent on task--a double dissociation.

Directory of Open Access Journals (Sweden)

Dario Cazzoli

Full Text Available Systematic differences in circadian rhythmicity are thought to be a substantial factor determining inter-individual differences in fatigue and cognitive performance. The synchronicity effect (when time of testing coincides with the respective circadian peak period seems to play an important role. Eye movements have been shown to be a reliable indicator of fatigue due to sleep deprivation or time spent on cognitive tasks. However, eye movements have not been used so far to investigate the circadian synchronicity effect and the resulting differences in fatigue. The aim of the present study was to assess how different oculomotor parameters in a free visual exploration task are influenced by: a fatigue due to chronotypical factors (being a 'morning type' or an 'evening type'; b fatigue due to the time spent on task. Eighteen healthy participants performed a free visual exploration task of naturalistic pictures while their eye movements were recorded. The task was performed twice, once at their optimal and once at their non-optimal time of the day. Moreover, participants rated their subjective fatigue. The non-optimal time of the day triggered a significant and stable increase in the mean visual fixation duration during the free visual exploration task for both chronotypes. The increase in the mean visual fixation duration correlated with the difference in subjectively perceived fatigue at optimal and non-optimal times of the day. Conversely, the mean saccadic speed significantly and progressively decreased throughout the duration of the task, but was not influenced by the optimal or non-optimal time of the day for both chronotypes. The results suggest that different oculomotor parameters are discriminative for fatigue due to different sources. A decrease in saccadic speed seems to reflect fatigue due to time spent on task, whereas an increase in mean fixation duration a lack of synchronicity between chronotype and time of the day.

Effects of actinide compositional variability in the US spent fuel inventory on partitioning-transmutation systems

International Nuclear Information System (INIS)

Ludwig, S.B.; Michaels, G.E.; Hanson, B.D.

1992-01-01

Partitioning and transmutation (P-T) is an advanced waste management concept by which certain undesirable nuclides in spent fuel are first isolated (partitioned) and later destroyed (transmuted) in a nuclear reactor or other transmutation device. There are wide variabilities in the nuclide composition of spent fuel. This implies that there will also be wide variabilities in the transmutation device feed. As a waste management system, P-T must be able to accept (all) spent fuel. Variability of nuclide composition (i.e., the feed material for transmutation devices) may be important because virtually all transmutation systems propose to configure transuranic (TRU) nuclides recovered from discharged lightwater reactor (LWR) spent fuel in critical or near-critical cores. To date, all transmutation system core analyses assume invariant nuclide concentrations for startup and recycle cores. Using the US Department of Energy's (DOE's) Characteristics Data Base (CDB) and the ORIGEN2 computer code, the current and projected spent fuel discharges until the year 2016 have been categorized according to combinations of fuel burnup, initial enrichment, fuel age (cooling time) and reactor type (boiling-water or pressurized-water reactors). The variability of the infinite multiplication factor (k ∞ ) is calculated for both fast (ALMR) and thermal (accelerator-based) transmuter systems

Spent fuel storage requirements. An update of DOE/RL-85-2

International Nuclear Information System (INIS)

1986-10-01

Utility projections of spent fuel storage capacities indicate that some commercial light water reactors (LWRs) have inadequate capacity to handle projected spent fuel discharges. This report presents estimates of potential near-term requirements for additional LWR spent fuel storage capacity, based on information supplied by utilities operating commercial nuclear power plants. These estimates provide information needed for planning the Department of Energy's (DOE) activities to be carried out under the DOE's Commercial Spent Fuel Management (CSFM) Program, in conjunction with the requirements of the Nuclear Waste Policy Act of 1982. This report is the latest in a series published by the DOE on LWR spent fuel storage requirements. The estimates in this report cover the period from the present through the year 2000. Although the DOE objective is to begin accepting spent fuel for final disposal in 1998, types of fuel and the receipt rates to be shipped are not yet known. Hence, this report makes no assumption regarding such fuel shipments. The report also assesses the possible impacts of increased fuel exposure and spent fuel transshipment on the requirements for additional storage capacity

Spent Fuel and Waste Management Technology Development Program. Annual progress report

Energy Technology Data Exchange (ETDEWEB)

Bryant, J.W.

1994-01-01

This report provides information on the progress of activities during fiscal year 1993 in the Spent Fuel and Waste Management Technology Development Program (SF&WMTDP) at the Idaho Chemical Processing Plant (ICPP). As a new program, efforts are just getting underway toward addressing major issues related to the fuel and waste stored at the ICPP. The SF&WMTDP has the following principal objectives: Investigate direct dispositioning of spent fuel, striving for one acceptable waste form; determine the best treatment process(es) for liquid and calcine wastes to minimize the volume of high level radioactive waste (HLW) and low level waste (LLW); demonstrate the integrated operability and maintainability of selected treatment and immobilization processes; and assure that implementation of the selected waste treatment process is environmentally acceptable, ensures public and worker safety, and is economically feasible.

Re-Examining Gender Differences in Video Game Play: Time Spent and Feelings of Success

Science.gov (United States)

Hamlen, Karla R.

2010-01-01

Research has shown that, among children, boys tend to play video games more than girls do. There are several theories addressing this phenomenon, including that stereotypes and lack of opportunity leave girls feeling inadequate with certain types of technology. No research has yet examined the interactive relationships between time spent playing…

Feeding in full-time public schools: Do students adhere and accept?

Directory of Open Access Journals (Sweden)

Nágila Araújo de CARVALHO

Full Text Available ABSTRACT Objective Identifying adherence to, and acceptance of school feeding, and analyzing the factors associated with non-adherence/non-acceptance in full-time public schools in Goiânia, Goiás, Brazil. Methods Cross-sectional study with students of both sexes aged 6-14 years. Issues regarding the consumption of meals, food distribution, food eaten outside the school and socioeconomic data, including nutritional assessment of students, were investigated. Adherence to meals was defined as the consumption of school meals four to five times/week, and acceptance was defined as meal approval, using the facial hedonic scale. Results A total of 359 students participated in this study and it was observed that adherence was high for lunch (95% and afternoon snacks (78%, and low for morning snacks (44%. Acceptance did not reach the required minimum percentage of 85% for any of the meals. Factors associated with non-adherence were the presence of >4 people in a household, having meals in a refectory, the meal location being considered uncomfortable and a negative evaluation of utensils used in eating meals. Factors associated with non-acceptance were age >10 years, female sex, the negative evaluation of utensils used in eating meals and inadequate food temperature. Conclusion Lunch and afternoon snacks showed the highest adherence, but the stipulated acceptance was not reached. Non-adherence and non-acceptance were mainly associated with aspects related to school feeding. This study allowed the evaluation of feeding in full-time public schools, in order to influence its improvement.

Time Spent on the Internet and Adolescent Blood Pressure.

Science.gov (United States)

Cassidy-Bushrow, Andrea E; Johnson, Dayna A; Peters, Rosalind M; Burmeister, Charlotte; Joseph, Christine L M

2015-10-01

Internet use is nearly ubiquitous among adolescents. Growing evidence suggests heavy Internet use negatively impacts health, yet the relationship between time spent on the Internet and adolescent blood pressure (BP) is unknown. We examined the association between Internet use and elevated BP in a racially diverse cross-sectional sample of 331 healthy adolescents (ages 14-17 years). Heavy Internet use was defined as ≥ 2 hr/day, moderate use as Internet users had statistically significantly higher odds of elevated BP compared to light Internet users. School nurses can play an important role in preventing high BP through assessment of BP and other health behaviors including Internet use, and health teaching to individuals, student groups, faculty, and parents to increase awareness of the relationship between Internet use and health. © The Author(s) 2014.

Surveillance instrumentation for spent-fuel safeguards

International Nuclear Information System (INIS)

McKenzie, J.M.; Holmes, J.P.; Gillman, L.K.; Schmitz, J.A.; McDaniel, P.J.

1978-01-01

The movement, in a facility, of spent reactor fuel may be tracked using simple instrumentation together with a real time unfolding algorithm. Experimental measurements, from multiple radiation monitors and crane weight and position monitors, were obtained during spent fuel movements at the G.E. Morris Spent-Fuel Storage Facility. These data and a preliminary version of an unfolding algorithm were used to estimate the position of the centroid and the magnitude of the spent fuel radiation source. Spatial location was estimated to +-1.5 m and source magnitude to +-10% of their true values. Application of this surveillance instrumentation to spent-fuel safeguards is discussed

Measurement of informal care: an empirical study into the valid measurement of time spent on informal caregiving.

NARCIS (Netherlands)

Berg, Bernard van den; Spauwen, Pol

2006-01-01

The incorporation of informal care into economic evaluations of health care is troublesome. The debate focuses on the valuation of time spent on informal caregiving, while time measurement, a related and may be even a more important issue, tends to be neglected. Valid time measurement is a necessary

DOE-owned spent nuclear fuel program plan

International Nuclear Information System (INIS)

1995-11-01

The Department of Energy (DOE) has produced spent nuclear fuel (SNF) for many years as part of its various missions and programs. The historical process for managing this SNF was to reprocess it whereby valuable material such as uranium or plutonium was chemically separated from the wastes. These fuels were not intended for long-term storage. As the need for uranium and plutonium decreased, it became necessary to store the SNF for extended lengths of time. This necessity resulted from a 1992 DOE decision to discontinue reprocessing SNF to recover strategic materials (although limited processing of SNF to meet repository acceptance criteria remains under consideration, no plutonium or uranium extraction for other uses is planned). Both the facilities used for storage, and the fuel itself, began experiencing aging from this extended storage. New efforts are now necessary to assure suitable fuel and facility management until long-term decisions for spent fuel disposition are made and implemented. The Program Plan consists of 14 sections as follows: Sections 2--6 describe objectives, management, the work plan, the work breakdown structure, and the responsibility assignment matrix. Sections 7--9 describe the program summary schedules, site logic diagram, SNF Program resource and support requirements. Sections 10--14 present various supplemental management requirements and quality assurance guidelines

DOE-owned spent nuclear fuel program plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

The Department of Energy (DOE) has produced spent nuclear fuel (SNF) for many years as part of its various missions and programs. The historical process for managing this SNF was to reprocess it whereby valuable material such as uranium or plutonium was chemically separated from the wastes. These fuels were not intended for long-term storage. As the need for uranium and plutonium decreased, it became necessary to store the SNF for extended lengths of time. This necessity resulted from a 1992 DOE decision to discontinue reprocessing SNF to recover strategic materials (although limited processing of SNF to meet repository acceptance criteria remains under consideration, no plutonium or uranium extraction for other uses is planned). Both the facilities used for storage, and the fuel itself, began experiencing aging from this extended storage. New efforts are now necessary to assure suitable fuel and facility management until long-term decisions for spent fuel disposition are made and implemented. The Program Plan consists of 14 sections as follows: Sections 2--6 describe objectives, management, the work plan, the work breakdown structure, and the responsibility assignment matrix. Sections 7--9 describe the program summary schedules, site logic diagram, SNF Program resource and support requirements. Sections 10--14 present various supplemental management requirements and quality assurance guidelines.

Transportation of spent nuclear fuels

International Nuclear Information System (INIS)

Meguro, Toshiichi

1976-01-01

The spent nuclear fuel taken out of reactors is cooled in the cooling pool in each power station for a definite time, then transported to a reprocessing plant. At present, there is no reprocessing plant in Japan, therefore the spent nuclear fuel is shipped abroad. In this paper, the experiences and the present situation in Japan are described on the transport of the spent nuclear fuel from light water reactors, centering around the works in Tsuruga Power Station, Japan Atomic Power Co. The spent nuclear fuel in Tsuruga Power Station was first transported in Apr. 1973, and since then, about 36 tons were shipped to Britain by 5 times of transport. The reprocessing plant in Japan is expected to start operation in Apr. 1977, accordingly the spent nuclear fuel used for the trial will be transported in Japan in the latter half of this year. Among the permission and approval required for the transport of spent nuclear fuel, the acquisition of the certificate for transport casks and the approval of land and sea transports are main tasks. The relevant laws are the law concerning the regulations of nuclear raw material, nuclear fuel and reactors and the law concerning the safety of ships. The casks used in Tsuruga Power Station and EXL III type, and the charging of spent nuclear fuel, the decontamination of the casks, the leak test, land transport with a self-running vehicle, loading on board an exclusive carrier and sea transport are briefly explained. The casks and the ship for domestic transport are being prepared. (Kato, I.)

International safeguards for spent fuel storage

International Nuclear Information System (INIS)

Kratzer, M.; Wonder, E.; Immerman, W.; Crane, F.

1981-08-01

This report analyzes the nonproliferation effectiveness and political and economic acceptability of prospective improvements in international safeguard techniques for LWR spent fuel storage. Although the applicability of item accounting considerably eases the safeguarding of stored spent fuel, the problem of verification is potentially serious. A number of simple gamma and neutron nondestructive assay techniques were found to offer considerable improvements, of a qualitative rather than quantitative nature, in verification-related data and information, and possess the major advantage of intruding very little on facility operations. A number of improved seals and monitors appear feasible as well, but improvements in the timeliness of detection will not occur unless the frequency of inspection is increased or a remote monitoring capability is established. Limitations on IAEA Safeguards resources and on the integration of results from material accounting and containment and surveillance remain problems

Acceptance of non-fuel assembly hardware by the Federal Waste Management System

International Nuclear Information System (INIS)

1990-03-01

This report is one of a series of eight prepared by E. R. Johnson Associates, Inc. (JAI) under ORNL's contract with DOE's OCRWM Systems Integration Program and in support of the Annual Capacity Report (ACR) Issue Resolution Process. The report topics relate specifically to the list of high-priority technical waste acceptance issues developed jointly by DOE and a utility-working group. JAI performed various analyses and studies on each topic to serve as starting points for further discussion and analysis leading eventually to finalizing the process by which DOE will accept spent fuel and waste into its waste management system. The eight reports are concerned with the conditions under which spent fuel and high-level waste will be accepted in the following categories: failed fuel; consolidated fuel and associated structural parts; non-fuel-assembly hardware; fuel in metal storage casks; fuel in multi-element sealed canisters; inspection and testing requirements for wastes; canister criteria; spent fuel selection for delivery; and defense and commercial high-level waste packages. 14 refs., 12 figs., 43 tabs

Time spent sitting during and outside working hours in bus drivers: A pilot study.

Science.gov (United States)

Varela-Mato, Veronica; Yates, Thomas; Stensel, David J; Biddle, Stuart J H; Clemes, Stacy A

2016-06-01

This cross-sectional pilot study objectively measured sedentary and non-sedentary time in a sample of bus drivers from the East Midlands, United Kingdom. Participants wore an activPAL3 inclinometer for 7 days and completed a daily diary. Driver's blood pressure, heart rate, waist circumference and body composition were measured objectively at the outset. The proportions of time spent sedentary and non-sedentary were calculated during waking hours on workdays and non-workdays and during working-hours and non-working-hours on workdays. 28 (85% of those enrolled into the study) provided valid objective monitoring data (89.3% male, [median ± IQR] age: 45.2 ± 12.8 years, BMI 28.1 ± 5.8 kg/m(2)). A greater proportion of time was spent sitting on workdays than non-workdays (75% [724 ± 112 min/day] vs. 62% [528 ± 151 min/day]; p working-hours than non-working-hours (83% [417 ± 88 min/day] vs. 68% [307 ± 64 min/day]; p less than 3% of their overall time stepping. Bus drivers accumulate high levels of sitting time during working-hours and outside working-hours. Interventions are urgently needed in this at-risk group, which should focus on reducing sitting and increasing movement during breaks and increasing physical activity during leisure time to improve cardiovascular health.

Situation and perspective of spent fuel management in Spain

International Nuclear Information System (INIS)

Lopez Garcia, A.

2009-01-01

Between september 2006 and september 2007, the Foundation for Energy Studies carried out the study Radioactive Waste Management: Situation, Analysis and Perspectives. This study focuses specially on spent fuel and high level radioactive waste management. The different aspects covered in this study are as follows: -Description of the different applicable technologies -Analysis and comparison of the different options of spent fuel management, including the strategic and economic aspects. - Situation, strategies and forecasts in the main countries. -Analysis of the situation and alternatives for the spent fuel management in spain. Although the report focuses principally pn the technological and environmental aspects other issues related with the management of these materials were considered, such as the strategic, economic and institutional aspects as well as the social acceptation. In answer to the request of the SNE publication, the article enclosed is a summary of one of the chapters of this study, and more particularly the one dedicated to the situation of spent fuel and high level radioactive waste management in Spain. (Author)

Spent fuel dissolution studies FY 1991 to 1994

International Nuclear Information System (INIS)

Gray, W.J.; Wilson, C.N.

1995-12-01

Dissolution and transport as a result of groundwater flow are generally accepted as the primary mechanisms by which radionuclides from spent fuel placed in a geologic repository could be released to the biosphere. To help provide a source term for performance assessment calculations, dissolution studies on spent fuel and unirradiated uranium oxides have been conducted over the past few years at Pacific Northwest National Laboratory (PNNL) in support of the Yucca Mountain Site Characterization Project. This report describes work for fiscal years 1991 through 1994. The objectives of these studies and the associated conclusions, which were based on the limited number of tests conducted so far, are described in the following subsections

Optimization of the Spent Fuel Attribute Tester using radiation transport calculations

International Nuclear Information System (INIS)

Laub, T.W.; Dupree, S.A.; Arlt, R.

1993-01-01

The International Atomic Energy Agency uses the Spent Fuel Attribute Tester (SFAT) to measure gamma signatures from fuel assemblies stored in spent fuel pools. It consists of a shielded, collimated NaI(Tl) detector attached to an air-filled pipe. The purpose of the present study was to define design changes, within operational constraints, that would improve the target assembly 137 Cs signal relative to the background signals from adjacent assemblies. This improvement is essential to reducing to an acceptable level the measurement time during an inspection. Monte Carlo calculations of the entire geometry were impractical, therefore, a hybrid method was developed that combined one-dimensional discrete ordinates models of the spent fuel pool, three-dimensional Monte Carlo calculations of the SFAT, and detector response calculations. The method compared well with measurements taken with the existing baseline SFAT. Calculations predicted significant improvements in signal-to-noise ratio. Recommended changes included shortening the pipe and increasing its wall thickness, placing low-Z filters in the crystal line of sight, reducing the thickness of shielding around the collimator aperture and adding shielding around the crystal, and reducing the diameter of the crystal. An instrument incorporating these design changes is being fabricated in Finland and will be tested this year

Spent nuclear fuel and high level radioactive waste transportation. White paper

International Nuclear Information System (INIS)

1985-06-01

The High-Level Radioactive Waste Committee of the Western Interstate Energy Board has been involved in a year-long cooperative project with the US Department of Energy (DOE) to develop an information base on the transportation of spent nuclear fuel and high-level radioactive waste (HLW) so that western states can be constructive and informed participants in the repository program under the Nuclear Waste Policy Act (NWPA). The historical safety record of transportation of HLW and spent fuel is excellent; no release of these radioactive materials has ever occurred during transportation. Projected shipments under the NWPA will, however, greatly exceed current shipments in the US. For example, over the past five years, 119 metric tons of civilian spent fuel have been shipped in this country, while shipments to the first and second repository are each expected to peak at 3000 metric tons per year. The Committee believes that the successful development and operation of a national HLW/spent fuel transportation system can best be accomplished through an open process based on the common sense approach of taking all reasonable measures to minimize public risk and performing whatever actions are reasonably required to promote public acceptance. Therefore, the Committee recommends that the Department of Energy further the goals of the NWPA by developing a Comprehensive Transportation Plan which adopts a systematic, comprehensive, and integrated approach to resolving all spent fuel and HLW transportation issues in a timely manner. The suggested scope of such a plan is discussed in this White paper. Many of the suggested elements of such a plan are similar to those being developed by the Department of energy for inclusion in the Department's Transportation Institutional Plan

High-burnup/low-cooling-time fuel carrying capacity of the GA-4 and GA-9 spent fuel shipping casks

International Nuclear Information System (INIS)

Boshoven, J.K.; Hopf, J.E.

1994-01-01

In response to utilities' projected needs to ship higher burnup spent fuel, General Atomics (GA) has performed shielding and thermal analysis for the GA-4 and GA-9 legal weight shipping casks to determine the minimum cooling times for various burnup levels for fully loaded GA-4 and GA-9 casks and reduced payloads for the casks. Tables are provided in the paper which show the minimum cooling time for a given burnup and payload for each of the casks. The analyses show that the GA-4 and GA-9 casks can carry at least as many high-burnup and/or short-cooling-time spent fuel assemblies as present day shipping casks. In addition, the GA casks are able to carry at least twice as many assemblies as the present day shipping casks if the spent fuel burnup levels and/or cooling times are open-quotes coolerclose quotes or open-quotes as coolclose quotes as their design basis fuels. The increased shipping capacity for these more common open-quotes coolerclose quotes assemblies allows fewer shipments and therefore increases the efficiency and lowers predicted risks of the transport system

HFIR spent fuel management alternatives

International Nuclear Information System (INIS)

Begovich, J.M.; Green, V.M.; Shappert, L.B.; Lotts, A.L.

1992-01-01

The High Flux Isotope Reactor (HFIR) at Martin Marietta Energy Systems' Oak Ridge National Laboratory (ORNL) has been unable to ship its spent fuel to Savannah River Site (SRS) for reprocessing since 1985. The HFIR storage pools are expected to fill up in the February 1994 to February 1995 time frame. If a management altemative to existing HFIR pool storage is not identified and implemented before the HFIR pools are full, the HFIR will be forced to shut down. This study investigated several alternatives for managing the HFIR spent fuel, attempting to identify options that could be implemented before the HFIR pools are full. The options investigated were: installing a dedicated dry cask storage facility at ORNL, increasing HFIR pool storage capacity by clearing the HFIR pools of debris and either close-packing or stacking the spent fuel elements, storing the spent fuel at another ORNL pool, storing the spent fuel in one or more hot cells at ORNL, and shipping the spent fuel offsite for reprocessing or storage elsewhere

DESIGN VERIFICATION REPORT SPENT NUCLEAR FUEL (SNF) PROJECT CANISTER STORAGE BUILDING (CSB)

International Nuclear Information System (INIS)

BAZINET, G.D.

2003-01-01

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. Revision 1 documented verification actions that were pending at the time the initial report was prepared. Revision 3 of this document incorporates MCO Cover Cap Assembly welding verification activities. Verification activities for the installed and operational SSCs have been completed

Time spent for activation of non-profit studies in oncology in Italy.

Directory of Open Access Journals (Sweden)

Gianfranco De Feo

Full Text Available AIM: The aim of this paper is to describe the time spent to activate oncological non-profit clinical trials promoted in Italy by the National Cancer Institute of Naples, following the implementation of recent European laws. METHODOLOGY: Data about the process of activation of 5 non-profit multicentre clinical trials were prospectively collected through a web-based system. The impact of European guidelines was assessed by comparing the efficiency of the process between applications started before and after the decree introducing in Italy the Clinical Trial Application form (MD-CTA. Outcomes of the descriptive analyses were the time to EC opinion, the time to administrative agreement signature after a positive EC opinion, and the cumulative percentage of submissions that came to closure (either positive or negative within four subsequent time cohorts. PRINCIPAL FINDINGS: From March 2007 to October 2009, 202 applications were submitted to 107 centres. Forty-four (59% applications of those submitted before were successful, compared to 71 (55% of those submitted after MD-CTA. Most of the failures were due to missing EC response (27% and 22% or administrative reasons (10% and 16%, before and after, respectively; very few (4% and 7% were due to EC refusal. The impact of the MD-CTA on time to EC opinion looked positive (median 4.1 vs 2.4 months, before and after, respectively but a subgroup analysis revealed that the impact was limited to a comparison biased by the selection of EC. After a positive EC opinion, there was no difference before and after MD-CTA in the time to administrative agreement signature (median 3.6 and 3.8 months, respectively. A trend to shortening time to closure of the whole submission process over the time was evident, with 58% of the applications coming to closure within 6 months from submission in the most recent cohort. CONCLUSIONS: In our experience there is reassuring evidence of a trend toward shortening the time spent to

Radiation shielding at interim storage facility for CANDU-type nuclear spent fuel

International Nuclear Information System (INIS)

Mateescu, S.; Radu, M. Pantazi D.; Stanciu, M.

1997-01-01

Technical measures in radiological protection are taken in the interim storage facility design to ensure that, during normal operation, exposures of workers and members of public to ionizing radiation are limited to levels lower than regulatory limits. The spent fuel storage design provides for radiation exposure to be as low as reasonable achievable (ALARA principles). The evaluation of radiation shields includes the most conservative provisions: - all locations which may contain spent fuel are full; - the spent fuel has reached the maximum burnup; - the post irradiation cooling period should be the minimum reasonable; - equipment for handling contains the maximum amount of spent fuel. Radiation shields should ensure that external radiation fields do not exceed limits accepted by the Regulatory Body Module. The evaluation has been performed with two computer codes, QAD-5K and MICROSHIELD-4. (authors)

A comparison of radiation doses and risks between spent fuel transport/storage and selected non-nuclear activities

International Nuclear Information System (INIS)

Pennington, C.W.

2003-01-01

Spent fuel transport and storage have achieved an exemplary safety record over four decades within both the United States (US) and the global community at large. This paper offers an assessment demonstrating the safety of spent fuel transport and storage packagings relative to currently accepted but unregulated non-nuclear activities and practices within society. Over the last quarter of a century, several spent fuel transport and storage packaging test programmes have produced data that allow calculation of potential releases and population doses resulting from a terrorist attack. The US Department of Energy (DOE) has used this information to develop projected worst-case, low probability population exposures as part of the Final Environmental Impact Statement (FEIS) for the Yucca Mountain repository. The paper discusses potential population exposures from these packagings based on analysis and testing under beyond-design-basis (BDB) events, including missile attacks, and then defines and defends an acceptance criterion for the bounding outcomes of these events, based upon current accepted activities within society that produce high radiation doses to the general public. These activities involve unregulated technologies and practices within society that yield population doses significantly exceeding those that would result from such hypothetical and highly improbable events as a terrorist missile attack on a spent fuel transport or storage packaging. In particular, technologically enhanced natural radiation (TENR) exposures from building materials, farming, and masonry construction are highlighted. Recent landmark work by the US National Academy of Sciences (NAS) and by the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) are cited in support of this assessment, along with work from the US Environmental Protection Agency (EPA). From this compelling evidence, it is concluded that spent fuel transport and storage represent a low

Nonproliferation impacts assessment for the management of the Savannah River Site aluminum-based spent nuclear fuel

International Nuclear Information System (INIS)

1998-12-01

On May 13, 1996, the US established a new, 10-year policy to accept and manage foreign research reactor spent nuclear fuel containing uranium enriched in the US. The goal of this policy is to reduce civilian commerce in weapons-usable highly enriched uranium (HEU), thereby reducing the risk of nuclear weapons proliferation. Two key disposition options under consideration for managing this fuel include conventional reprocessing and new treatment and packaging technologies. The Record of Decision specified that, while evaluating the reprocessing option, ''DOE will commission or conduct an independent study of the nonproliferation and other (e.g., cost and timing) implications of chemical separation of spent nuclear fuel from foreign research reactors.'' DOE's Office of Arms Control and Nonproliferation conducted this study consistent with the aforementioned Record of Decision. This report addresses the nonproliferation implications of the technologies under consideration for managing aluminum-based spent nuclear fuel at the Savannah River Site. Because the same technology options are being considered for the foreign research reactor and the other aluminum-based spent nuclear fuels discussed in Section ES.1, this report addresses the nonproliferation implications of managing all the Savannah River Site aluminum-based spent nuclear fuel, not just the foreign research reactor spent nuclear fuel. The combination of the environmental impact information contained in the draft EIS, public comment in response to the draft EIS, and the nonproliferation information contained in this report will enable the Department to make a sound decision regarding how to manage all aluminum-based spent nuclear fuel at the Savannah River Site

Effect of the time spent by the photon in the absorbed state on the time-dependent transfer of radiation

International Nuclear Information System (INIS)

Rao, D.M.; Rangarajan, K.E.; Peraiah, A.

1990-01-01

The time-dependent transfer equation is derived for a two-level atomic model which takes both bound-bound and bound-free transitions into account. A numerical scheme is proposed for solving the monochromatic time-dependent transfer equation when the time spent by the photon in the absorbed state is significant. The method can be easily extended to solve the problem of time-dependent line formation of the bound-free continuum. It is used here to study three types of boundary conditions of the incident radiation incident on a scattering atmosphere. The quantitative results show that the relaxation of the radiation field depends on the optical depth of the medium and on the ray's angle of emergence. 21 refs

Determinants of Children's Use of and Time Spent in Fast-Food and Full-Service Restaurants

Science.gov (United States)

McIntosh, Alex; Kubena, Karen S.; Tolle, Glen; Dean, Wesley; Kim, Mi-Jeong; Jan, Jie-Sheng; Anding, Jenna

2011-01-01

Objective: Identify parental and children's determinants of children's use of and time spent in fast-food (FF) and full-service (FS) restaurants. Design: Analysis of cross-sectional data. Setting: Parents were interviewed by phone; children were interviewed in their homes. Participants: Parents and children ages 9-11 or 13-15 from 312 families…

Standard format and content for a license application to store spent fuel and high-level radioactive waste

International Nuclear Information System (INIS)

1989-09-01

Subpart B, ''License Application, Form, and Contents,'' of 10 CFR Part 72, ''Licensing Requirements for the Independent Storage of Spent Nuclear Fuel and High-Level Radioactive Waste,'' specifies the information to be covered in an application for a license to store spent fuel in an independent spent fuel storage installation (ISFSI) or to store spent fuel and high-level radioactive waste in a monitored retrievable storage facility (MRS). However, Part 72 does not specify the format to be followed in the license application. This regulatory guide suggests a format acceptable to the NRC staff for submitting the information specified in Part 72 for license application to store spent fuel in an ISFSI or to store spent fuel and high-level radioactive waste in an MRS

Intermodal transportation of spent fuel

International Nuclear Information System (INIS)

Elder, H.K.

1983-09-01

Concepts for transportation of spent fuel in rail casks from nuclear power plant sites with no rail service are under consideration by the US Department of Energy in the Commercial Spent Fuel Management program at the Pacific Northwest Laboratory. This report identifies and evaluates three alternative systems for intermodal transfer of spent fuel: heavy-haul truck to rail, barge to rail, and barge to heavy-haul truck. This report concludes that, with some modifications and provisions for new equipment, existing rail and marine systems can provide a transportation base for the intermodal transfer of spent fuel to federal interim storage facilities. Some needed land transportation support and loading and unloading equipment does not currently exist. There are insufficient shipping casks available at this time, but the industrial capability to meet projected needs appears adequate

Rethinking the economics of centralized spent fuel storage

International Nuclear Information System (INIS)

Wood, T.W.; Short, S.M.; Dippold, D.G.; Rod, S.R.; Williams, J.W.

1991-01-01

The technology for extended storage of spent nuclear fuel (SNF), either at-reactor or in a centralized facility such as a monitored retrievable storage (MRS) facility, is well-developed and proven from an engineering and safety perspective. The question of whether spent fuel should await its final geologic disposal while at a reactor site or in an MRS facility is essentially an economic one. While intuition and previous results suggest that centralized storage will be more economical than at-reactor storage beyond some break-even quantity of SNF, the incremental costs of pool storage at-reactor are close to zero as long as pool capacity is generally available. Thus, if economics is the prime motivator, the quantity of spent fuel required to warrant centralized storage could be quite large. The economics of centralizing the storage of spent fuel at a single site, as opposed to continued storage at over 100 reactor sites, has been the subject of several recent analyses. Most of these analyses involved calculating the benefits of an MRS facility (in terms of avoided utility costs) with a pre-defined MRS operating scenario (e.g., spent fuel acceptance schedule, storage capacity, and typical storage cycle). While these analyses provided some insight into the economic justification for an MRS facility, even the most favorable scenarios resulted in net costs of hundreds of millions of dollars when evaluated on a discounted cash flow basis

Spent-fuel storage - MRS and/or on-site?

International Nuclear Information System (INIS)

Fuierer, A.A.

1991-01-01

The US government through the Office of Civilian Radioactive Waste Management (OCRWM) is seeking by the use of an authorized negotiator a site for a monitored retrievable storage (MRS) facility. Based on a public information document provided by the office of the negotiator, the MRS will be an integral part of the federal system for safe and permanent disposal of the nation's high-level radioactive wastes. It is planned that the MRS will accept and store spent fuel above ground until a repository opens and spent fuel that has been stored is shipped from the MRS to the repository. Additional spent fuel stored at reactor sites will be shipped to the MRS, which will be used as a staging area to assemble dedicated trains for shipment to the repository. The intent of the MRS is to reduce utilities' needs to expand on-site storage of spent fuel. A utility viewpoint may emphasize an alternate set of priorities. The waste management system must be considered as an overall system involving both the utility and DOE that begins with the first discharge of spent nuclear fuel from a commercial reactor and ends with high-level waste in a final repository. Many studies have been made on individual components of a waste system. This study, with the benefit of past hands-on experience as a guide, looks at costs and reliability for a total system concept with particular emphasis on the interface between the utility and Department of Energy

European experience with spent fuel transport

International Nuclear Information System (INIS)

Hunter, I.A.

1995-01-01

Nuclear Transport Ltd has transported 5000 tonnes of spent fuel from 35 reactors in 8 European countries since 1972. Transport management is governed by the Quality Plan for: transport administration, packaging and shipment procedures at the shipping plant, operations at the power plant, and packaging and shipment organization at the power plant. Selection of a suitable carrier device is made with regard to the shipping plant requirements, physical limitations of the reactor, fuel characteristics, and transport route constraints. The transport plan is set up taking into account exploitation of the casks, reactor shut-down requirements, fuel acceptance plans at the reprocessing plant, and cask maintenance periods. A transport cycle involving spent fuel shipment to La Hague or to Sellafield takes typically two or four weeks, respectively. Most transports through Europe are by rail. A special-design railway ferry boat serves transports to the United Kingdom. Both wet or dry casks are employed. Modern casks are designed for high burnups and for oxide fuels. (J.B.)

Software to improve spent fuel measurements using the FDET

International Nuclear Information System (INIS)

Staples, P.; Beddingfield, D.; Lestone, J.; Pelowitz, D.; Sprinkle, J.; Bytchkov, V.; Starovich, Z.; Harizanov, I.; Vellejo-Luna, J.; Lavender, C.

2001-01-01

Full text: Vast quantities of spent fuel are available for safeguard measurements, primarily in Commonwealth of Independent States (CIS) of the former Soviet Union. This spent fuel, much of which consists of long cooling time material, is going to become less unique in the world safeguards arena as reprocessing projects or permanent repositories continue to be delayed or postponed. The long cooling time of many of the spent fuel assemblies in the CIS countries being prepared for intermediate term storage promotes the possibility of increased accuracy in spent fuel assays. An important point to consider for the future that could advance safeguards measurements for re-verification and inspection measurements would be to determine what safeguards requirements should be imposed upon this 'new' class of spent fuel. Improvements in measurement capability will obviously affect the safeguards requirements. What most significantly enables this progress in spent fuel measurements is the improvement in computer processing power and software enhancements leading to user-friendly Graphical User Interfaces (GUI's). The software used for these projects significantly reduces the IAEA inspector's time both learning and operating computer and data acquisition systems. While at the same time by standardizing the spent fuel measurements it is possible to increase reproducibility and reliability of the measurement data. The inclusion of various analysis algorithms into the operating environment, which can be performed in real time upon the measurement data, can also lead to increases in safeguard reliability and improvements in efficiency to plant operations. (author)

DESIGN VERIFICATION REPORT SPENT NUCLEAR FUEL (SNF) PROJECT CANISTER STORAGE BUILDING (CSB)

Energy Technology Data Exchange (ETDEWEB)

BAZINET, G.D.

2003-02-12

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. Revision 1 documented verification actions that were pending at the time the initial report was prepared. Revision 3 of this document incorporates MCO Cover Cap Assembly welding verification activities. Verification activities for the installed and operational SSCs have been completed.

Intermodal transfer of spent fuel

International Nuclear Information System (INIS)

Neuhauser, K.S.; Weiner, R.F.

1991-01-01

As a result of the international standardization of containerized cargo handling in ports around the world, maritime shipment handling is particularly uniform. Thus, handier exposure parameters will be relatively constant for ship-truck and ship-rail transfers at ports throughout the world. Inspectors' doses are expected to vary because of jurisdictional considerations. The results of this study should be applicable to truck-to-rail transfers. A study of the movement of spent fuel casks through ports, including the loading and unloading of containers from cargo vessels, afforded an opportunity to estimate the radiation doses to those individuals handling the spent fuels with doses to the public along subsequent transportation routes of the fuel. A number of states require redundant inspections and for escorts over long distances on highways; thus handlers, inspectors, escort personnel, and others who are not normally classified as radiation workers may sustain doses high enough to warrant concern about occupational safety. This paper addresses the question of radiation safety for these workers. Data were obtained during, observation of the offloading of reactor spent fuel (research reactor spent fuel, in this instance) which included estimates of exposure times and distances for handlers, inspectors and other workers during offloading and overnight storage. Exposure times and distance were also for other workers, including crane operators, scale operators, security personnel and truck drivers. RADTRAN calculational models and parameter values then facilitated estimation of the dose to workers during incident-free ship-to-truck transfer of spent fuel

Technical, economic and institutional aspects of regional spent fuel storage facilities

International Nuclear Information System (INIS)

2005-11-01

A particular challenge facing countries with small nuclear programmes is the preparation for extended interim storage and then disposal of their spent nuclear fuel. The costs and complications of providing for away-from-reactor storage facilities and/or geological repositories for relatively small amounts of spent fuel may be prohibitively high, motivating interest in regional solutions. This publication addresses the technical, economic and institutional aspects of regional spent fuel storage facilities (RSFSF) and is based on the results of a series of meetings on this topic with participants from IAEA Member States. Topics discussed include safety criteria and standards, safeguards and physical protection, fuel acceptance criteria, long term stability of systems and stored fuel, selection of site, infrastructure aspects, storage technology, licensing, operations, transport, decommissioning, as well as research and development. Furthermore the publication comprises economic, financial and institutional considerations including organizations and legal aspects followed by political and public acceptance and ethical considerations. Approaches and processes for implementation are discussed, as well as the overall benefits and risks of implementing a regional facility. It is illustrated that implementing a RSFSF facility would involve simultaneously addressing a wide range of diverse challenges. The appendix to this report tabulates the numerous issues that have been touched upon in the study. It appears, however, from the discussions that the challenges can in principle be met; the RSFSF concept is technically feasible and potentially economically viable. The technical committees producing this report did not identify any obvious institutional deficiencies that would prevent completion of such a project. Storing spent fuel in a few safe, reliable, secure facilities could enhance safeguards, physical protection and non-proliferation benefits. The committee also

S. 699: This Act may be cited as the Independent Spent Nuclear Fuel Storage Act of 1991, introduced in the Senate of the United States, One Hundred Second Congress, First Session, March 20, 1991

International Nuclear Information System (INIS)

Anon.

1991-01-01

This bill would amend the Nuclear Waste Policy Act of 1982 to allow commercial nuclear utilities that have contracts with the US DOE under section 302 of that Act to receive credits to offset the cost of storing spent fuel that the DOE is unable to accept for storage on and after January 31, 1998. The amount of the credit will be 0.56 mil per kilowatt-hour for electricity generated by the civilian nuclear power reactor and sold during the period the facility is eligible for the credit. The credit will end for a particular nuclear power plant at the time the DOE first accepts spent fuel from that facility

Comparison of the Transportation Risks Resulting from Accidents during the Transportation of the Spent Fuel

International Nuclear Information System (INIS)

Jeong Jong Tae; Cho, Dong Kuen; Choi, Heui Joo; Choi, Jong Won

2007-01-01

The safe, environmentally sound and publicly acceptable disposal of high level wastes and spent fuels is becoming a very important issue. The operational safety assessment of a repository including a transportation safety assessment is a fundamental part in order to achieve this goal. According to the long term management strategy for spent fuels in Korea, they will be transported from the spent fuel pools in each nuclear power plant to the central interim storage facility (CISF) which is to start operation in 2016. Therefore, we have to determine the safe and economical logistics for the transportation of these spent fuels by considering their transportation risks and costs. In this study, we developed four transportation scenarios by considering the type of transportation casks and transport means in order to suggest safe and economical transportation logistics for spent fuels. Also, we estimated and compared the transportation risks resulting from the accidents during the transportation of spent fuels for these four transportation scenarios

Gamma spectrometric characterization of short cooling time nuclear spent fuels using hemispheric CdZnTe detectors

CERN Document Server

Lebrun, A; Szabó, J L; Arenas-Carrasco, J; Arlt, R; Dubreuil, A; Esmailpur-Kazerouni, K

2000-01-01

After years of cooling, nuclear spent fuel gamma emissions are mainly due to caesium isotopes which are emitters at 605, 662 and 796-801 keV. Extensive work has been done on such fuels using various CdTe or CdZnTe probes. When fuels have to be measured after short cooling time (during NPP outage) the spectrum is much more complex due to the important contributions of niobium and zirconium in the 700 keV range. For the first time in a nuclear power plant, four spent fuels of the Kozloduy VVER reactor no 4 were measured during outage, 37 days after shutdown of the reactor. In such conditions, good resolution is of particular interest, so a 20 mm sup 3 hemispheric crystal was used with a resolution better than 7 keV at 662 keV. This paper presents the experimental device and analyzes the results which show that CdZnTe commercially available detectors enabled us to perform a semi-quantitative determination of the burn-up after a short cooling time. In addition, it is discussed how a burn-up evolution code (CESAR)...

KE basin recirculation/skimmer/IX systems restart acceptance test report

International Nuclear Information System (INIS)

Derosa, D.C.

1996-01-01

The 105 KE Basin Recirculation System and Skimmer Loop have been upgraded to provide the flexibility to run the Ion Exchange Modules on either system to support spent fuel removal for the Spent Nuclear Fuel Project. This Acceptance Test Report Provides the documentation of the leak Testing for the construction work associated with the IXM inlet and outlet piping, places the cartridge filters back in service and provides the functional testing of the IXM's on the recirculation and skimmer systems

Time Spent by Calliphora Spp. Blowflies on Standard Traps Baited with Liver and Ammonia

Directory of Open Access Journals (Sweden)

Florica Morariu

2010-10-01

Full Text Available The larvae of blowflies from the Calliphoridae family cause fly strikes in sheep and other species of economic importance. Impaired wool, decrease of ewe fertility, and even death can occur in heavy infestations. This paper describes the Calliphora spp. blowflies’ behavior on and around a trap baited with liver and ammonia before they entered in. More than half of Calliphora spp. blowflies (50.88% stayed a medium time (eight to fourteen seconds on the standard trap, while only 1.79% of them spent a longer time (26 to 30 seconds before entering the trap.

Spent nuclear fuel transport problems

International Nuclear Information System (INIS)

Kondrat'ev, A.N.; Kosarev, Yu.A.; Yulikov, E.I.

1977-01-01

The paper considers the problems of shipping spent fuel from nuclear power stations to reprocessing plants and also the principal ways of solving these problems with a view to achieving maximum economy and safety in transport. The increase in the number of nuclear power plants in the USSR will entail an intensification of spent-fuel shipments. Higher burnup and the need to reduce cooling time call for heavier and more complex shipping containers. The problem of shipping spent fuel should be tackled comprehensively, bearing in mind the requirements of safety and economy. One solution to these problems is to develop rational and cheap designs of such containers. In addition, the world-wide trend towards more thorough protection of the environment against pollution and of the health of the population requires the devotion of constant attention to improving the reliability and safety of shipments. The paper considers the prospects for nuclear power development in the USSR and in other member countries of the CMEA (1976-1980), the composition and design of some Soviet packaging assemblies, the appropriate cooling time for spent fuel from thermal reactor power stations, procedures for reducing fuel-shipping costs, some methodological problems of container calculation and design, and finally problems of testing and checking containers on test rigs. (author)

Deployment evaluation methodology for the electrometallurgical treatment of DOE-EM spent nuclear fuel

International Nuclear Information System (INIS)

Dahl, C.A.; Adams, J.P.; Ramer, R.J.

1998-07-01

Part of the Department of Energy (DOE) spent nuclear fuel (SNF) inventory may require some type of treatment to meet acceptance criteria at various disposition sites. The current focus for much of this spent nuclear fuel is the electrometallurgical treatment process under development at Argonne National Laboratory. Potential flowsheets for this treatment process are presented. Deployment of the process for the treatment of the spent nuclear fuel requires evaluation to determine the spent nuclear fuel program need for treatment and compatibility of the spent nuclear fuel with the process. The evaluation of need includes considerations of cost, technical feasibility, process material disposition, and schedule to treat a proposed fuel. A siting evaluation methodology has been developed to account for these variables. A work breakdown structure is proposed to gather life-cycle cost information to allow evaluation of alternative siting strategies on a similar basis. The evaluation methodology, while created specifically for the electrometallurgical evaluation, has been written such that it could be applied to any potential treatment process that is a disposition option for spent nuclear fuel. Future work to complete the evaluation of the process for electrometallurgical treatment is discussed

Reprocessing of spent fuel and public acceptance

International Nuclear Information System (INIS)

Imai, Ryukichi

1977-01-01

The public acceptance has to be considered regarding whole atomic power rather than the reprocessing of nuclear fuel separately, and the problems concerned are as follows; the release of radioactive materials in the normal and abnormal operations of reprocessing plants, the disposal of wastes with high level radioactivity, the transportation of high level radioactive material, the relation to the economic activity near nuclear plants, the environmental effect of 85 Kr. and 3 H, etc., and the physical protection for reprocessing facility itself, the special handling of the materials of very high radioactivity level such as fission products and plutonium, the radiation exposure of operators, and the demonstration of reprocessing techniques of commercial base, etc., as a part of the nuclear fuel cycle, and the relation between atomic power and other technologies in energy supply, the evalution of atomic power as the symbol of huge scale science, and the energy problem within the confrontation of economic development and the preservation of environment and resources regarding whole nuclear energy. The situations of fuel reprocessing in USA, UK, France, Germany and Japan are explained from the viewpoint of the history. The general background for the needs of nuclear energy in Japan, the image of nuclear energy and fuel reprocessing entertained by the general public, and the special feature of reprocessing techniques are described. (Nakai, Y.)

Relationship of Near-Crash/Crash Risk to Time Spent on a Cell Phone While Driving.

Science.gov (United States)

Farmer, Charles M; Klauer, Sheila G; McClafferty, Julie A; Guo, Feng

2015-01-01

The objective of this study was to examine in a naturalistic driving setting the dose-response relationship between cell phone usage while driving and risk of a crash or near crash. How is the increasing use of cell phones by drivers associated with overall near-crash/crash risk (i.e., during driving times both on and off the phone)? Day-to-day driving behavior of 105 volunteer subjects was monitored over a period of 1 year. A random sample was selected comprised of 4 trips from each month that each driver was in the study, and in-vehicle video was used to classify driver behavior. The proportion of driving time spent using a cell phone was estimated for each 3-month period and correlated with overall crash and near-crash rates for each period. Thus, it was possible to test whether changes in an individual driver's cell phone use over time were associated with changes in overall near-crash/crash risk. Drivers in the study spent 11.7% of their driving time interacting with a cell phone, primarily talking on the phone (6.5%) or simply holding the phone in their hand or lap (3.7%). The risk of a near-crash/crash event was approximately 17% higher when the driver was interacting with a cell phone, due primarily to actions of reaching for/answering/dialing, which nearly triples risk (relative risk = 2.84). However, the amount of driving time spent interacting with a cell phone did not affect a driver's overall near-crash/crash risk. Vehicle speeds within 6 s of the beginning of each call on average were 5-6 mph lower than speeds at other times. Results of this naturalistic driving study are consistent with the observation that increasing cell phone use in the general driving population has not led to increased crash rates. Although cell phone use can be distracting and crashes have occurred during this distraction, overall crash rates appear unaffected by changes in the rate of cell phone use, even for individual drivers. Drivers compensate somewhat for the distraction

Emerging effortful control in toddlerhood: the role of infant orienting/regulation, maternal effortful control, and maternal time spent in caregiving activities.

Science.gov (United States)

Bridgett, David J; Gartstein, Maria A; Putnam, Samuel P; Lance, Kate Oddi; Iddins, Erin; Waits, Robin; Vanvleet, Jessica; Lee, Lindsay

2011-02-01

Latent growth modeling (LGM) was used to examine the contribution of changes in infant orienting/regulation (O/R) to the emergence of toddler effortful control (EC), the contributions of maternal EC to the development of infant O/R and the emergence of toddler EC, the influence of maternal time spent in caregiving activities on toddler EC and the slope of infant O/R, and the contribution of maternal EC to subsequent maternal time spent in caregiving activities. Mothers from 158 families completed a self-report measure of EC when their infants were 4 months of age, a measure of infant O/R when their infants were 4, 6, 8, 10, and 12 months of age, and a measure of toddler EC when their children reached 18 months of age. Information concerning maternal time spent in various interactive caregiving activities was collected when infants were 6 months old. Results indicated higher maternal EC predicted interindividual differences in the intercept (i.e., higher intercepts), but not slope, of infant O/R and that higher maternal EC, higher infant O/R intercept, and higher infant O/R slope contributed to higher toddler EC. Furthermore, higher maternal EC predicted greater maternal time spent in interactive caregiving activities with their infants and greater maternal time in interactive caregiving with infants also contributed to higher toddler EC after controlling for maternal EC. These findings contribute to the understanding of the influence of maternal EC, directly and through caregiving, on toddler EC. Additional implications as they are related to early developing regulatory aspects of temperament are discussed. Copyright © 2010 Elsevier Inc. All rights reserved.

Automatic spent fuel ID number reader (I)

International Nuclear Information System (INIS)

Tanabe, S.; Kawamoto, H.; Fujimaki, K.; Kobe, A.

1991-01-01

An effective and efficient technique has been developed for facilitating identification works of LWR spent fuel stored in large scale spent fuel storage pools of such as processing plants. Experience shows that there are often difficulties in the implementation of operator's nuclear material accountancy and control works as well as safeguards inspections conducted on spent fuel assemblies stored in deep water pool. This paper reports that the technique is realized as an automatic spent fuel ID number reader system installed on fuel handling machine. The ID number reader system consists of an optical sub-system and an image processing sub-system. Thousands of spent fuel assemblies stored in under water open racks in each storage pool could be identified within relatively short time (e.g. within several hours) by using this combination. Various performance tests were carried out on image processing sub-system in 1990 using TV images obtained from different types of spent fuel assemblies stored in various storage pools of PWR and BWR power stations

Daily time spent indoors in German homes--baseline data for the assessment of indoor exposure of German occupants.

Science.gov (United States)

Brasche, Sabine; Bischof, Wolfgang

2005-01-01

Comprehensive time-activity studies, for use as a basis for estimates of personal exposure, are not readily available in Germany. This analysis of time spent indoors at home is based on data from "Dampness and mould in homes" (2000/ 2001)--a study of about 12,000 persons living in 5530 randomly selected apartments and houses in Germany. The results show the mean times per day people in Germany spend in their homes, classified by gender, age group, building location, city size, region, building type, owner-occupier status, number of people at home, smoking and ventilation habits, moisture emission and ill health factors such as asthma, allergy and number of acute respiratory infections per year. The overall mean time spent at home, 15.7 h per, is in accordance with results from US-American (15.6 h/day) and Canadian (15.8 h/day) human activity surveys carried out in the nineties, as well as being consistent with the German Environmental Survey (1990/92) and a small German study in 1987.

Time Spent on Dedicated Patient Care and Documentation Tasks Before and After the Introduction of a Structured and Standardized Electronic Health Record.

Science.gov (United States)

Joukes, Erik; Abu-Hanna, Ameen; Cornet, Ronald; de Keizer, Nicolette F

2018-01-01

Physicians spend around 35% of their time documenting patient data. They are concerned that adopting a structured and standardized electronic health record (EHR) will lead to more time documenting and less time for patient care, especially during consultations. This study measures the effect of the introduction of a structured and standardized EHR on documentation time and time for dedicated patient care during outpatient consultations. We measured physicians' time spent on four task categories during outpatient consultations: documentation, patient care, peer communication, and other activities. Physicians covered various specialties from two university hospitals that jointly implemented a structured and standardized EHR. Preimplementation, one hospital used a legacy-EHR, and one primarily paper-based records. The same physicians were observed 2 to 6 months before and 6 to 8 months after implementation.We analyzed consultation duration, and percentage of time spent on each task category. Differences in time distribution before and after implementation were tested using multilevel linear regression. We observed 24 physicians (162 hours, 439 consultations). We found no significant difference in consultation duration or number of consultations per hour. In the legacy-EHR center, we found the implementation associated with a significant decrease in time spent on dedicated patient care (-8.5%). In contrast, in the previously paper-based center, we found a significant increase in dedicated time spent on documentation (8.3%) and decrease in time on combined patient care and documentation (-4.6%). The effect on dedicated documentation time significantly differed between centers. Implementation of a structured and standardized EHR was associated with 8.5% decrease in time for dedicated patient care during consultations in one center and 8.3% increase in dedicated documentation time in another center. These results are in line with physicians' concerns that the introduction

Probabilistic safety analysis of transportation of spent fuel

International Nuclear Information System (INIS)

Subramaniam, Chitra

1999-11-01

The report presents the results of the study carried out to estimate the accident risk involved in the transport of spent fuel from Rajasthan Atomic Power Station near Kota to the fuel reprocessing plant at Tarapur. The technique of probabilistic safety analysis is used. The fuel considered is the Indian pressurised heavy water reactor fuel with a minimum cooling period of 485 days. The spent fuel is transported in a cuboidal, naturally-cooled shipping cask over a distance of 822 km by rail. The Indian rail accident statistics are used to estimate the basic rail accident frequency. The possible ways in which a release of radioactive material can occur from the spent fuel cask are identified by the fault tree analysis technique. The release sequences identified are classified into eight accident severity categories, and release fractions are assigned to each. The consequences resulting from the release are estimated by the computer code RADTRAN 4. Results of the risk analysis indicate that the accident risk values are very low and hence acceptable. Parametric studies show that the risk would continue to be small even if the controlling parameters were to simultaneously take extreme adverse values. (author)

Spent fuel dry storage in Hungary

International Nuclear Information System (INIS)

Buday, G.; Szabo, B.; Oerdoegh, M.; Takats, F.

1999-01-01

Paks Nuclear Power Plant is the only NPP in Hungary. It has four WWER-440 type reactor units. Since 1989, approximately 40-50% of the total annual electricity generation of the country has been supplied by this plant. The fresh fuel is imported from Russia. Most of the spent fuel assemblies have been shipped back to Russia. Difficulties with spent fuel transportation to Russia have begun in 1992. Since that time, some of the shipments were delayed, some of them were completely cancelled, thus creating a backlog of spent fuel filling all storage positions of the plant. To provide assurance of the continued operation, Paks NPPs management decided to implement an independent spent fuel storage facility and chose GEC-Althom's MVDS design. The construction of the facility started in February 1995 and the first spent fuel assembly was placed in the store in September 1997. The paper gives an overview of the situation, describing the conditions leading to the construction of the dry storage facility at Paks and its implementation. Finally, some information is given about the new Public Agency for Radioactive Waste Management established this year and responsible for managing the issues related to spent fuel management. (author)

Spent nuclear fuel storage: Legal, technical and political considerations

International Nuclear Information System (INIS)

Blake, E.L. Jr.; Buren, M.A.

1994-01-01

In 1982, Congress enacted the Nuclear Waste Policy Act (NWPA), assigning responsibility to the Department of Energy (DOE) for the development and implementation of a comprehensive national nuclear waste management program. The NWPA makes clear that the generators and owners of commercially-generated spent nuclear fuel (SNF) have the primary responsibility to provide for, and pay the costs of, the interim storage of such SNF until it is accepted by the DOE under the provisions of the NWPA. The shift in responsibility was expected to begin in 1998, the date specified in the NWPA and the DOE's contracts with the utilities, at which time the NWPA anticipated commencement of operations of a geologic repository and/or a monitored retrievable storage facility (MRS). Unfortunately, despite a mid-course correction to the NWPA mandated by Congress in 1987 in an effort to streamline and accelerate the program, DOE is way behind schedule. DOE's last published program schedule indicates the commencement of repository operations in 2010, a date many feel is overly optimistic. In repeated statements during the early 1990s, DOE sought to reassure utility companies and their regulatory commissions that it could still commence SNF acceptance in 1998 for storage at an MRS if such a facility were sited through a voluntary process by the end of 1992. That date has now come and gone. Although DOE is still nominally seeking a voluntary MRS host jurisdiction, the prospects for MRS operation by 1998 are dim. Putting aside for the moment the question of DOE's ability to bring the repository on line, the immediate problem facing domestic utilities is the need to augment their onsite SNF storage capacity. In addition to providing a brief overview of the Federal independent spent fuel storage installation (ISFSI) licensing process, the author provides some insight of what the real issues are in ISFSI licensing

DISPOSABLE CANISTER WASTE ACCEPTANCE CRITERIA

Energy Technology Data Exchange (ETDEWEB)

R.J. Garrett

2001-07-30

The purpose of this calculation is to provide the bases for defining the preclosure limits on radioactive material releases from radioactive waste forms to be received in disposable canisters at the Monitored Geologic Repository (MGR) at Yucca Mountain. Specifically, this calculation will provide the basis for criteria to be included in a forthcoming revision of the Waste Acceptance System Requirements Document (WASRD) that limits releases in terms of non-isotope-specific canister release dose-equivalent source terms. These criteria will be developed for the Department of Energy spent nuclear fuel (DSNF) standard canister, the Multicanister Overpack (MCO), the naval spent fuel canister, the High-Level Waste (HLW) canister, the plutonium can-in-canister, and the large Multipurpose Canister (MPC). The shippers of such canisters will be required to demonstrate that they meet these criteria before the canisters are accepted at the MGR. The Quality Assurance program is applicable to this calculation. The work reported in this document is part of the analysis of DSNF and is performed using procedure AP-3.124, Calculations. The work done for this analysis was evaluated according to procedure QAP-2-0, Control of Activities, which has been superseded by AP-2.21Q, Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities. This evaluation determined that such activities are subject to the requirements of DOE/RW/0333P, Quality Assurance Requirements and Description (DOE 2000). This work is also prepared in accordance with the development plan titled Design Basis Event Analyses on DOE SNF and Plutonium Can-In-Canister Waste Forms (CRWMS M&O 1999a) and Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages (CRWMS M&O 2000d). This calculation contains no electronic data applicable to any electronic data management system.

Factors Influencing Acceptability and Perceived Impacts of a Mandatory ePortfolio Implemented by an Occupational Therapy Regulatory Organization.

Science.gov (United States)

Vachon, Brigitte; Foucault, Marie-Lyse; Giguère, Charles-Édouard; Rochette, Annie; Thomas, Aliki; Morel, Martine

2018-01-01

The use of ePortfolios has been implemented in several regulatory organizations to encourage clinicians' engagement in continuing professional development (CPD). However, their use has achieved mixed success, and multiple personal and contextual factors can influence their impacts on practice change. The aim of this study was to identify which factors influence the acceptability and perceived impacts of an ePortfolio implemented by an occupational therapy regulatory organization in one Canadian province. A cross-sectional online survey design was used. The survey was sent to registered occupational therapists in Quebec. Multiple regression analyses were conducted to identify factors influencing acceptability and outcomes: ease of use, satisfaction, impact on implementation of the CPD plan, and competence improvement. The survey was fully completed by 546 participants. Factors significantly influencing the ePortfolio acceptability and perceived impacts were attitude toward and familiarity with the portfolio, confidence in reflective skills, engagement in the CPD plan, and desire for feedback. Time spent completing the ePortfolio and the fact of completing it in teams were negatively associated with the outcomes. Shaping more favorable user attitudes, helping users recognize and experience the tool's benefits for their practice, and fostering confidence in their reflective skills are important factors that can be addressed to improve ePortfolio acceptability and outcomes. Contextual factors, such as time spent completing the ePortfolio and completing it in teams, seem to reflect greater difficulty with using the tool. Study findings can contribute to improving ePortfolio implementation in the CPD context.

Spent fuel behaviour during dry storage - a review

International Nuclear Information System (INIS)

Shivakumar, V.; Anantharaman, K.

1997-09-01

One of the strategies employed for management of spent fuel prior to their final disposal/reprocessing is their dry storage in casks, after they have been sufficiently cooled in spent fuel pools. In this interim storage, one of the main consideration is that the fuel should retain its integrity to ensure (a) radiological health hazard remains minimal and (b) the fuel is retrievable for down steam fuel management processes such as geological disposal or reprocessing. For dry storage of spent fuel in air, oxidation of the exposed UO 2 is the most severe of phenomena affecting the integrity of fuel. This is kept within acceptable limits for desired storage time by limiting the fuel temperature in the storage cask. The limit on the fuel temperature is met by having suitable limits on maximum burn-up of fuel, minimum cooling period in storage pool and optimum arrangement of fuel bundles in the storage cask from heat removal considerations. The oxidation of UO 2 by moist air has more deleterious effects on the integrity of fuel than that by dry air. The removal of moisture from the storage cask is therefore a very important aspect in dry storage practice. The kinetics of the oxidation phenomena at temperatures expected during dry storage in air is very slow and therefore the majority of the existing data is based on extrapolation of data obtained at higher fuel temperatures. This and the complex effects of factors like fission products in fuel, radiolysis of storage medium etc. has necessitated in having a conservative limiting criteria. The data generated by various experimental programmes and results from the on going programmes have shown that dry storage is a safe and economical practice. (author)

Breast Intensity-Modulated Radiation Therapy Reduces Time Spent With Acute Dermatitis for Women of All Breast Sizes During Radiation

International Nuclear Information System (INIS)

Freedman, Gary M.; Li Tianyu; Nicolaou, Nicos; Chen Yan; Ma, Charlie C.-M.; Anderson, Penny R.

2009-01-01

Purpose: To study the time spent with radiation-induced dermatitis during a course of radiation therapy for breast cancer in women treated with conventional or intensity-modulated radiation therapy (IMRT). Methods and Materials: The study population consisted of 804 consecutive women with early-stage breast cancer treated with breast-conserving surgery and radiation from 2001 to 2006. All patients were treated with whole-breast radiation followed by a boost to the tumor bed. Whole-breast radiation consisted of conventional wedged photon tangents (n = 405) earlier in the study period and mostly of photon IMRT (n = 399) in later years. All patients had acute dermatitis graded each week of treatment. Results: The breakdown of the cases of maximum acute dermatitis by grade was as follows: 3%, Grade 0; 34%, Grade 1; 61%, Grade 2; and 2%, Grade 3. The breakdown of cases of maximum toxicity by technique was as follows: 48%, Grade 0/1, and 52%, Grade 2/3, for IMRT; and 25%, Grade 0/1, and 75%, Grade 2/3, for conventional radiation therapy (p < 0.0001). The IMRT patients spent 82% of weeks during treatment with Grade 0/1 dermatitis and 18% with Grade 2/3 dermatitis, compared with 29% and 71% of patients, respectively, treated with conventional radiation (p < 0.0001). Furthermore, the time spent with Grade 2/3 toxicity was decreased in IMRT patients with small (p = 0.0015), medium (p < 0.0001), and large (p < 0.0001) breasts. Conclusions: Breast IMRT is associated with a significant decrease both in the time spent during treatment with Grade 2/3 dermatitis and in the maximum severity of dermatitis compared with that associated with conventional radiation, regardless of breast size.

Is time spent playing video games associated with mental health, cognitive and social skills in young children?

NARCIS (Netherlands)

Kovess-Masfety, V.; Keyes, K.M.; Hamilton, A.; Hanson, G.; Bitfoi, A.; Golitz, D.; Koç, C.; Kuijpers, R.C.W.M.; Lesinskiene, S.; Mihova, Z.; Otten, R.; Fermanian, C.; Pez, O.

2016-01-01

Video games are one of the favourite leisure activities of children; the influence on child health is usually perceived to be negative. The present study assessed the association between the amount of time spent playing video games and children mental health as well as cognitive and social skills.

Containing method for spent fuel and spent fuel containing vessel

International Nuclear Information System (INIS)

Maekawa, Hiromichi; Hanada, Yoshine.

1996-01-01

Upon containing spent fuels, a metal vessel main body and a support spacer having fuel containing holes are provided. The support spacer is disposed in the inside of the metal vessel main body, and spent fuel assemblies are loaded in the fuel containing holes. Then, a lid is welded at the opening of the metal vessel main body to provide a sealing state. In this state, heat released from the spent fuel assemblies is transferred to the wall of the metal vessel main body via the support spacer. Since the support spacer has a greater heat conductivity than gases, heat of the spent fuel assemblies tends to be released to the outside, thereby capable of removing heat of the spent fuel assemblies effectively. In addition, since the surfaces of the spent fuel assemblies are in contact with the inner surface of the fuel containing holes of the support spacer, impact-resistance and earthquake-resistance are ensured, and radiation from the spent fuel assemblies is decayed by passing through the layer of the support spacer. (T.M.)

The development of spent fuel storage process equipment

International Nuclear Information System (INIS)

Yoon, Wan Ki; Kim, Ho Dong; Kim, Ki Joon; Kim, Bum Hoe

1992-02-01

A nuclear material accounting system were designed to track the transitions of nuclear materials at the spent-fuel technology research facility. It is embedded in a distributed control system real-time structure of the system gives timely on-line accountancy. And performance of AC servo motor with fuzzy logic control and its applicability to spent fuel management were experimentally evaluated. (Author)

Experimental program to determine maximum temperatures for dry storage of spent fuel

International Nuclear Information System (INIS)

Knox, C.A.; Gilbert, E.R.; White, G.D.

1985-02-01

Although air is used as a cover gas in some dry storage facilities, other facilities use inert cover gases which must be monitored to assure inertness of the atmosphere. Thus qualifying air as a cover gas is attractive for the dry storage of spent fuels. At sufficiently high temperatures, air can react with spent fuel (UO 2 ) at the site of cladding breaches that formed during reactor irradiation or during dry storage. The reaction rate is temperature dependent; hence the rates can be maintained at acceptable levels if temperatures are low. Tests with spent fuel are being conducted at Pacific Northwest Laboratory (PNL) to determine the allowable temperatures for storage of spent fuel in air. Tests performed with nonirradiated UO 2 pellets indicated that moisture, surface condition, gamma radiation, gadolinia content of the fuel pellet, and temperature are important variables. Tests were then initiated on spent fuel to develop design data under simulated dry storage conditions. Tests have been conducted at 200 and 230 0 C on spent fuel in air and 275 0 C in moist nitrogen. The results for nonirradiated UO 2 and published data for irradiated fuel indicate that above 230 0 C, oxidation rates are unacceptably high for extended storage in air. The tests with spent fuel will be continued for approximately three years to enable reliable extrapolations to be made for extended storage in air and inert gases with oxidizing constituents. 6 refs., 6 figs., 3 tabs

Is time spent playing video games associated with mental health, cognitive and social skills in young children?

Science.gov (United States)

Kovess-Masfety, Viviane; Keyes, Katherine; Hamilton, Ava; Hanson, Gregory; Bitfoi, Adina; Golitz, Dietmar; Koç, Ceren; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy; Fermanian, Christophe; Pez, Ondine

2016-01-01

Background Video games are one of the favourite leisure activities of children; the influence on child health is usually perceived to be negative. The present study assessed the association between the amount of time spent playing video games and children mental health as well as cognitive and social skills. Methods Data were drawn from the School Children Mental Health Europe project conducted in six European Union countries (youth ages 6–11, n = 3195). Child mental health was assessed by parents and teachers using the Strengths and Difficulties Questionnaire and by children themselves with the Dominic Interactive. Child video game usage was reported by the parents. Teachers evaluated academic functioning. Multivariable logistic regressions were used. Results 20 % of the children played video games more than 5 h per week. Factors associated with time spent playing video games included being a boy, being older, and belonging to a medium size family. Having a less educated, single, inactive, or psychologically distressed mother decreased time spent playing video games. Children living in Western European countries were significantly less likely to have high video game usage (9.66 vs 20.49 %) though this was not homogenous. Once adjusted for child age and gender, number of children, mothers age, marital status, education, employment status, psychological distress, and region, high usage was associated with 1.75 times the odds of high intellectual functioning (95 % CI 1.31–2.33), and 1.88 times the odds of high overall school competence (95 % CI 1.44–2.47). Once controlled for high usage predictors, there were no significant associations with any child self-reported or mother- or teacher-reported mental health problems. High usage was associated with decreases in peer relationship problems [OR 0.41 (0.2–0.86) and in prosocial deficits (0.23 (0.07, 0.81)]. Conclusions Playing video games may have positive effects on young children. Understanding the mechanisms

Is time spent playing video games associated with mental health, cognitive and social skills in young children?

Science.gov (United States)

Kovess-Masfety, Viviane; Keyes, Katherine; Hamilton, Ava; Hanson, Gregory; Bitfoi, Adina; Golitz, Dietmar; Koç, Ceren; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy; Fermanian, Christophe; Pez, Ondine

2016-03-01

Video games are one of the favourite leisure activities of children; the influence on child health is usually perceived to be negative. The present study assessed the association between the amount of time spent playing video games and children mental health as well as cognitive and social skills. Data were drawn from the School Children Mental Health Europe project conducted in six European Union countries (youth ages 6-11, n = 3195). Child mental health was assessed by parents and teachers using the Strengths and Difficulties Questionnaire and by children themselves with the Dominic Interactive. Child video game usage was reported by the parents. Teachers evaluated academic functioning. Multivariable logistic regressions were used. 20 % of the children played video games more than 5 h per week. Factors associated with time spent playing video games included being a boy, being older, and belonging to a medium size family. Having a less educated, single, inactive, or psychologically distressed mother decreased time spent playing video games. Children living in Western European countries were significantly less likely to have high video game usage (9.66 vs 20.49 %) though this was not homogenous. Once adjusted for child age and gender, number of children, mothers age, marital status, education, employment status, psychological distress, and region, high usage was associated with 1.75 times the odds of high intellectual functioning (95 % CI 1.31-2.33), and 1.88 times the odds of high overall school competence (95 % CI 1.44-2.47). Once controlled for high usage predictors, there were no significant associations with any child self-reported or mother- or teacher-reported mental health problems. High usage was associated with decreases in peer relationship problems [OR 0.41 (0.2-0.86) and in prosocial deficits (0.23 (0.07, 0.81)]. Playing video games may have positive effects on young children. Understanding the mechanisms through which video game use may stimulate

Management of super-grade plutonium in spent nuclear fuel

International Nuclear Information System (INIS)

McFarlane, H. F.; Benedict, R. W.

2000-01-01

This paper examines the security and safeguards implications of potential management options for DOE's sodium-bonded blanket fuel from the EBR-II and the Fermi-1 fast reactors. The EBR-II fuel appears to be unsuitable for the packaging alternative because of DOE's current safeguards requirements for plutonium. Emerging DOE requirements, National Academy of Sciences recommendations, draft waste acceptance requirements for Yucca Mountain and IAEA requirements for similar fuel also emphasize the importance of safeguards in spent fuel management. Electrometallurgical treatment would be acceptable for both fuel types. Meeting the known requirements for safeguards and security could potentially add more than $200M in cost to the packaging option for the EBR-II fuel

Appeals Court: DOE must take spent fuel or pay the consequences

International Nuclear Information System (INIS)

Bauser, M.A.

1996-01-01

The US District of Columbia Circuit Court of Appeals ruled that the Nuclear Waste Policy Act of 1982 (NWPA) unconditionally obligated the US DOE to commence accepting spent nuclear fuel (SNF) from utilities on or before 31 January 1998. This article describes the background and history of the case and the court decision and the reasons for it

Reactivity and isotopic composition of spent PWR [pressurized-water-reactor] fuel as a function of initial enrichment, burnup, and cooling time

International Nuclear Information System (INIS)

Cerne, S.P.; Hermann, O.W.; Westfall, R.M.

1987-10-01

This study presents the reactivity loss of spent PWR fuel due to burnup in terms of the infinite lattice multiplications factor, k/sub ∞/. Calculations were performed using the SAS2 and CSAS1 control modules of the SCALE system. The k/sub ∞/ values calculated for all combinations of six enrichments, seven burnups, and five cooling times. The results are presented as a primary function of enrichment in both tabular and graphic form. An equation has been developed to estimate the tabulated values of k/sub ∞/'s by specifying enrichment, cooling time, and burnup. Atom densities for fresh fuel, and spent fuel at cooling times of 2, 10, and 20 years are included. 13 refs., 8 figs., 8 tabs

Studies on certain quality attributes of meat pickle prepared from spent chicken

Directory of Open Access Journals (Sweden)

Dilip Ranjan Nath

2013-06-01

Full Text Available Aim: An attempt was made to develop a desirable meat pickle from the less tender and low demand spent chicken meat with the prime objective of its better marketability and wider acceptability amongst the non-vegetarian masses. Materials and Methods: Lean of culled spent meat was marinated for overnight and then pressure cooked and fried with spices and condiments to prepare a shelf stable meat pickle. Proximate composition, pH, TBA Values, Total viable plate count, Counts for yeast and moulds and sensory quality of the pickles were studied as per standard procedure. Results: The mean per cent moisture, crude protein, ether extract and total ash contents were 61.89±0.12, 17.28±0.56, 14.65±0.16 and 3.35±0.17 respectively. The product pH and the yeast and mould counts though did not differ significantly amongst the storage periods, yet there were significant differences (p<0.01 in TBA and total viable plate count amongst the storage periods. Organoleptic studies with score card method recorded a progressive decrease in the mean panel scores along with the increased storage periods. Conclusion: The spent chicken meat pickle was found to be acceptable for consumption up-to 90 days of storage at room temperature. [Vet World 2013; 6(3.000: 156-158

Pyrochemical processing of DOE spent nuclear fuel

International Nuclear Information System (INIS)

Laidler, J.J.

1995-01-01

A compact, efficient method for conditioning spent nuclear fuel is under development. This method, known as pyrochemical processing, or open-quotes pyroprocessing,close quotes provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the United States Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (>99.9%) separation of transuranics. The resultant waste forms from the pyroprocess, are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and avoid the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory

Characteristics of spent nuclear fuel

International Nuclear Information System (INIS)

Notz, K.J.

1988-04-01

The Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the spent fuels and other wastes that will, or may, eventually be disposed of in a geological repository. The two major sources of these materials are commercial light-water reactor (LWR) spent fuel and immobilized high-level waste (HLW). Other wastes that may require long-term isolation include non-LWR spent fuels and miscellaneous sources such as activated metals. This report deals with spent fuels, but for completeness, the other sources are described briefly. Detailed characterizations are required for all of these potential repository wastes. These characteristics include physical, chemical, and radiological properties. The latter must take into account decay as a function of time. In addition, the present inventories and projected quantities of the various wastes are needed. This information has been assembled in a Characteristics Data Base which provides data in four formats: hard copy standard reports, menu-driven personal computer (PC) data bases, program-level PC data bases, and mainframe computer files. 5 refs., 3 figs., 4 tabs

Studies and research concerning BNFP. Nuclear spent fuel transportation studies

International Nuclear Information System (INIS)

Anderson, R.T.; Maier, J.B.

1979-11-01

Currently, there are a number of institutional problems associated with the shipment of spent fuel assemblies from commercial nuclear power plants: new and conflicting regulations, embargoing of certain routes, imposition of transport safeguards, physical security in-transit, and a lack of definition of when and where the fuel will be moved. This report presents a summary of these types and kinds of problems. It represents the results of evaluations performed relative to fuel receipt at the Barnwell Nuclear Fuel Plant. Case studies were made which address existing reactor sites with near-term spent fuel transportation needs. Shipment by either highway, rail, water, or intermodal water-rail was considered. The report identifies the impact of new regulations and uncertainty caused by indeterminate regulatory policy and lack of action on spent fuel acceptance and storage. This stagnant situation has made it impossible for industry to determine realistic transportation scenarios for business planning and financial risk analysis. A current lack of private investment in nuclear transportation equipment is expected to further prolong the problems associated with nuclear spent fuel and waste disposition. These problems are expected to intensify in the 1980's and in certain cases will make continuing reactor plant operation difficult or impossible

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

Energy Technology Data Exchange (ETDEWEB)

BAZINET, G.D.

2001-05-15

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. Revision 1 documented verification actions that were pending at the time the initial report was prepared. Verification activities for the installed and operational SSCs have been completed. Verification of future additions to the CSB related to the canister cover cap and welding fixture system and MCO Internal Gas Sampling equipment will be completed as appropriate for those components. The open items related to verification of those requirements are noted in section 3

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

Energy Technology Data Exchange (ETDEWEB)

BAZINET, G.D.

2000-11-03

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. The purpose of this revision is to document completion of verification actions that were pending at the time the initial report was prepared. Verification activities for the installed and operational SSCs have been completed. Verification of future additions to the CSB related to the canister cover cap and welding fixture system and MCO Internal Gas Sampling equipment will be completed as appropriate for those components. The open items related to verification of those

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

International Nuclear Information System (INIS)

BAZINET, G.D.

2001-01-01

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. Revision 1 documented verification actions that were pending at the time the initial report was prepared. Verification activities for the installed and operational SSCs have been completed. Verification of future additions to the CSB related to the canister cover cap and welding fixture system and MCO Internal Gas Sampling equipment will be completed as appropriate for those components. The open items related to verification of those requirements are noted in section 3.1.5 and will be

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

International Nuclear Information System (INIS)

BAZINET, G.D.

2000-01-01

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. The original version of this document was prepared by Vista Engineering for the SNF Project. The purpose of this revision is to document completion of verification actions that were pending at the time the initial report was prepared. Verification activities for the installed and operational SSCs have been completed. Verification of future additions to the CSB related to the canister cover cap and welding fixture system and MCO Internal Gas Sampling equipment will be completed as appropriate for those components. The open items related to verification of those requirements are noted

The Public Sphere and the Conflict-Structure in Spent Nuclear Fuel Management

International Nuclear Information System (INIS)

Cho, Seong Kyung

2009-01-01

Social Acceptance is important to decide policy of spent nuclear fuel management. The idea of a public sphere as a receptacle of dynamic process is the core in this discussion. The purpose of this study is to examine the concept, participants, the conflict-structure and agreeable conditions of a public sphere. A public sphere means in this paper, mechanism and systems that various stakeholders' and public's participation with spontaneous will can affect decision-making process. For good designing and implementing a public sphere, it is necessary to analysis and cope with political, foreign and security, economic, sociocultural environments, the law and systems around spent nuclear fuel management.

Integrated monitoring and reviewing systems for the Rokkasho Spent Fuel Receipt and Storage Facility

International Nuclear Information System (INIS)

Yokota, Yasuhiro; Ishikawa, Masayuki; Matsuda, Yuji

1998-01-01

The Rokkasho Spent Fuel Receipt and Storage (RSFS) Facility at the Rokkasho Reprocessing Plant (RRP) in Japan is expected to begin operations in 1998. Effective safeguarding by International Atomic Energy Agency (IAEA) and Japan Atomic Energy Bureau (JAEB) inspectors requires monitoring the time of transfer, direction of movement, and number of spent fuel assemblies transferred. At peak throughput, up to 1,000 spent fuel assemblies will be accepted by the facility in a 90-day period. In order for the safeguards inspector to efficiently review the resulting large amounts of inspection information, an unattended monitoring system was developed that integrates containment and surveillance (C/S) video with radiation monitors. This allows for an integrated review of the facility's radiation data, C/S video, and operator declaration data. This paper presents an outline of the integrated unattended monitoring hardware and associated data reviewing software. The hardware consists of a multicamera optical surveillance (MOS) system radiation monitoring gamma-ray and neutron detector (GRAND) electronics, and an intelligent local operating network (ILON). The ILON was used for time synchronization and MOS video triggers. The new software consists of a suite of tools, each one specific to a single data type: radiation data, surveillance video, and operator declarations. Each tool can be used in a stand-alone mode as a separate ion application or configured to communicate and match time-synchronized data with any of the other tools. A data summary and comparison application (Integrated Review System [IRS]) coordinates the use of all of the data-specific review tools under a single-user interface. It therefore automates and simplifies the importation of data and the data-specific analyses

Social acceptance of high school students in classroom and on Facebook

Directory of Open Access Journals (Sweden)

Tanja Špes

2017-03-01

Full Text Available The aim of the present study was to examine the relationship between social acceptance in classroom and social acceptance on Facebook. In this study social acceptance was operationalized as social preference and as sociometric status. First, we examined whether intensity of Facebook usage, time spent on Facebook, and social preference in classroom predict social preference on Facebook. Second, we examined the relationship between sociometric status in classroom and sociometric status on Facebook. We used Facebook intensity scale (FBI and two versions of sociometric test (with regard to peer relations in the classroom and on Facebook. The participants were 188 high school students, 117 females (57.4% and 71 males (34.8%, between 16 and 19 years of age. The results have shown that social preference in classroom significantly predicts social preference on Facebook and that there is a positive moderate correlation between sociometric status in classroom and sociometric status on Facebook. These results are important for implementation of preventive strategies for students, who are rejected and are victims of bullying.

The acceptability of waiting times for elective general surgery and the appropriateness of prioritising patients

Directory of Open Access Journals (Sweden)

Knol Dirk L

2007-02-01

Full Text Available Abstract Background Problematic waiting lists in public health care threaten the equity and timeliness of care provision in several countries. This study assesses different stakeholders' views on the acceptability of waiting lists in health care, their preferences for priority care of patients, and their judgements on acceptable waiting times for surgical patients. Methods A questionnaire survey was conducted among 257 former patients (82 with varicose veins, 86 with inguinal hernia, and 89 with gallstones, 101 surgeons, 95 occupational physicians, and 65 GPs. Judgements on acceptable waiting times were assessed using vignettes of patients with varicose veins, inguinal hernia, and gallstones. Results Participants endorsed the prioritisation of patients based on clinical need, but not on ability to benefit. The groups had significantly different opinions (p Acceptable waiting times ranged between 2 and 25 weeks depending on the type of disorder (p Conclusion The explicit prioritisation of patients seems an accepted means for reducing the overall burden from waiting lists. The disagreement about appropriate prioritisation criteria and the need for uniformity, however, raises concern about equity when implementing prioritisation in daily practice. Single factor waiting time thresholds seem insufficient for securing timely care provision in the presence of long waiting lists as they do not account for the different consequences of waiting between patients.

Psychological, interpersonal, and clinical factors predicting time spent on physical activity among Mexican patients with hypertension.

Science.gov (United States)

Ybarra Sagarduy, José Luis; Camacho Mata, Dacia Yurima; Moral de la Rubia, José; Piña López, Julio Alfonso; Yunes Zárraga, José Luis Masud

2018-01-01

It is widely known that physical activity is the key to the optimal management and clinical control of hypertension. This research was conducted to identify factors that can predict the time spent on physical activity among Mexican adults with hypertension. This cross-sectional study was conducted among 182 Mexican patients with hypertension, who completed a set of self-administered questionnaires related to personality, social support, and medical adherence and health care behaviors, body mass index, and time since the disease diagnosis. Several path analyses were performed in order to test the predictors of the study behavior. Lower tolerance to frustration, more tolerance to ambiguity, more effective social support, and less time since the disease diagnosis predicted more time spent on physical activity, accounting for 13.3% of the total variance. The final model shows a good fit to the sample data ( p BS =0.235, χ 2 / gl =1.519, Jöreskog and Sörbom's Goodness of Fit Index =0.987, adjusted modality =0.962, Bollen's Incremental Fit Index =0.981, Bentler-Bonett Normed Fit Index =0.946, standardized root mean square residual =0.053). The performance of physical activity in patients with hypertension depends on a complex set of interactions between personal, interpersonal, and clinical variables. Understanding how these factors interact might enhance the design of interdisciplinary intervention programs so that quality of life of patients with hypertension improves and they might be able to manage and control their disease well.

Time spent in housework and leisure: links with parents' physiological recovery from work.

Science.gov (United States)

Saxbe, Darby E; Repetti, Rena L; Graesch, Anthony P

2011-04-01

Spouses' balancing of housework and leisure activities at home may affect their recovery from work. This paper reports on a study of everyday family life in which 30 dual-earner couples were tracked around their homes by researchers who recorded their locations and activities every 10 min. For women, the most frequently pursued activities at home were housework, communication, and leisure; husbands spent the most time in leisure activities, followed by communication and housework. Spouses differed in their total time at home and their proportion of time devoted to leisure and housework activities, with wives observed more often in housework and husbands observed more often in leisure activities. Both wives and husbands who devoted more time to housework had higher levels of evening cortisol and weaker afternoon-to-evening recovery. For wives, husbands' increased housework time also predicted stronger evening cortisol recovery. When both spouses' activities were entered in the same model, leisure predicted husbands' evening cortisol, such that husbands who apportioned more time to leisure, and whose wives apportioned less time to leisure, showed stronger after-work recovery. These results suggest that the division of labor within couples may have implications for physical health.

Storing the world's spent nuclear fuel

International Nuclear Information System (INIS)

Barkenbus, J.N.; Weinberg, A.M.; Alonso, M.

1985-01-01

Given the world's prodigious future energy requirements and the inevitable depletion of oil and gas, it would be foolhardy consciously to seek limitations on the growth of nuclear power. Indeed, the authors continue to believe that the global nuclear power enterprise, as measured by installed reactor capacity, can become much larger in the future without increasing proliferation risks. To accomplish this objective will require renewed dedication to the non-proliferation regime, and it will require some new initiatives. Foremost among these would be the establishment of a spent fuel take-back service, in which one or a few states would retrieve spent nuclear fuel from nations generating it. The centralized retrieval of spent fuel would remove accessible plutonium from the control of national leaders in non-nuclear-weapons states, thereby eliminating the temptation to use this material for weapons. The Soviets already implement a retrieval policy with the spent fuel generated by East European allies. The authors believe that it is time for the US to reopen the issue of spent-fuel retrieval, and thus to strengthen its non-proliferation policies and the nonproliferation regime in general. 7 references

77 FR 21277 - Customer Clearing Documentation, Timing of Acceptance for Clearing, and Clearing Member Risk...

Science.gov (United States)

2012-04-09

..., 23, 37, et al. Customer Clearing Documentation, Timing of Acceptance for Clearing, and Clearing..., 38, and 39 RIN 3038-0092, -0094 Customer Clearing Documentation, Timing of Acceptance for Clearing... implement new statutory provisions enacted by Title VII of the Dodd-Frank Wall Street Reform and Consumer...

Radioactive spent resins conditioning by the hot super-compaction process

International Nuclear Information System (INIS)

Roth, Andreas; Centner, Baudouin; Lemmens, Alain

2007-01-01

Spent ion exchanger media are considered to be problematic waste that, in many cases, requires special approaches and precautions during its immobilization to meet the acceptance criteria for disposal. The waste acceptance criteria define, among others, the quality of waste forms for disposal, and therefore will sometimes define appropriate treatment options. The selection of treatment options for spent ion exchange materials must consider their physical and chemical characteristics. Basically, the main methods for the treatment of spent organic ion exchange materials, following to pretreatment methods are: - Direct immobilization, producing a stable end product by using Cement, Bitumen, Polymer or High Integrity Containers, - The destruction of the organic compounds by using Thermochemical processes or Oxidation to produce an inorganic intermediate product that may or may not be further conditioned for storage and/or disposal, - The complete removal of the resin inner structural water by a thermal process. After a thorough technical economical analysis, Tractebel Engineering selected the Resin Hot Compaction Process to be installed at Tihange Nuclear Power Plant. The Resin Hot Compaction Process is used to make dense homogenous organic blocks from a wide range of particulate waste. In this process spent resins are first dewatered and dried to remove the inner structural water content. The drying takes place in a drying vessel that holds the contents of two 200 L drums (Figure). In the oil heated drying and mixing unit, the resins are heated to the necessary process temperature for the hot pressing step and then placed into special metal drums, which are automatically lidded and immediately transferred to a high force compactor. After high force compaction the pellets are transferred to a measuring unit, where the dose rate, height and weight are automatically measured and recorded. A volume reduction factor of approximately up to four (depending on the type of

Changes in time spent walking and the risk of incident dementia in older Japanese people: the Ohsaki Cohort 2006 Study.

Science.gov (United States)

Tomata, Yasutake; Zhang, Shu; Sugiyama, Kemmyo; Kaiho, Yu; Sugawara, Yumi; Tsuji, Ichiro

2017-09-01

the impact of long-term changes in physical activity during adulthood in the context of primary prevention of dementia has not been addressed previously. to study the relationship between changes in time spent walking after middle age and incident dementia in older Japanese individuals. we conducted a cohort study of 6,909 disability-free Japanese individuals aged ≥65 years who lived in Ohsaki City, Japan. In both 1994 and 2006, the individual amount of time spent walking per day was assessed using a self-reported questionnaire (dementia were retrieved from the public Long-term Care Insurance (LTCI) Database, in which participants were followed up for 5.7 years (between April 2007 and November 2012). The Cox model was used for estimating the multivariate-adjusted hazard ratios (HRs) of incident dementia. the 5.7-year incidence of dementia was 9.2%. Compared with persons who remained in the lowest category of time spent walking (dementia: the multivariate-adjusted HR (95% confidence intervals) was 0.72 (0.53 and 0.97). these results suggest that maintaining a higher level of physical activity after middle age may be a key strategy for prevention of dementia in older age. © The Author 2017. Published by Oxford University Press on behalf of the British Geriatrics Society.All rights reserved. For permissions, please email: journals.permissions@oup.com

Aceitação sensorial de reestruturados empanados elaborados com filé de peito de galinhas matrizes de corte e poedeiras comerciais Sensory acceptance of nuggets prepared with broiler breeder and spent layer hens breast meat

Directory of Open Access Journals (Sweden)

Tatiana Pacheco Nunes

2006-12-01

Full Text Available Em 2005, no Brasil, o alojamento de galinhas poedeiras comerciais e de matrizes de corte somados foi de 109 milhões de cabeças, sendo que um número próximo a este deve ter sido descartado no mesmo período. Este grande número de galinhas descartadas contrasta com a falta de mercado consumidor e o baixo valor comercial alcançado por estas aves. A utilização da carne de galinhas na elaboração de produtos de conveniência poderia agregar valor e ampliar o consumo desta matéria-prima. Diante do exposto, o objetivo deste trabalho foi elaborar produtos empanados tipo nuggets, utilizando carne de galinhas de descarte (matrizes de corte e poedeiras comercias brancas e avaliar a aceitação pelo consumidor destes produtos, em comparação com nuggets elaborados com carne de frango. Os produtos desenvolvidos foram avaliados por análise sensorial, utilizando testes de aceitação e de intenção de compra em localização central (400 provadores. Não foram encontradas diferenças (p > 0,05 na aceitação sensorial nem na intenção de compra entre os três diferentes produtos avaliados. Concluiu-se que a elaboração de produtos empanados pode representar uma boa alternativa para a utilização de filés de peito de galinhas, agregando maior valor a estas aves ao final do ciclo de postura.In Brazil, the flock size of layer and broiler breeder hens housed in 2005 was 109 million. A similar number of hens might be spent in this period. This great number of spent hens contrasts with the absence of consumer market and the low commercial value reached by these birds. The manufacture of convenience products using spent hens meat could add value and elevate the consumption of this raw material. Thus, the purpose of this study was to develop nuggets made with spent hens (white layers and broiler breeders meat and evaluate the consumer acceptance of these products in comparison to nuggets elaborated with broiler meat. Sensory evaluation of acceptance

The effect of wheelchair propulsion style on changes in time spent in extreme wrist orientations after a bout of fatiguing propulsion.

Science.gov (United States)

Zukowski, Lisa A; Hass, Chris J; Shechtman, Orit; Christou, Evangelos A; Tillman, Mark D

2017-10-01

This study compared how wheelchair propulsion styles affect changes in percentage of time spent in extreme wrist orientations, which have been associated with median nerve injury, after a fatiguing bout of propulsion. Twenty novice, non-disabled adult males learned arcing (ARC) and semicircular (SEMI) propulsion styles and utilised each to perform a wheelchair fatigue protocol. ARC and SEMI did not significantly differ in terms of changes after the fatigue protocol in percentage of time spent in extreme flexion/extension or radial/ulnar deviation at the push phase beginning or end. A pattern was observed, although not significant, of greater increases in percentage of time spent in extreme wrist extension and ulnar deviation during the push phase beginning and ulnar deviation during the push phase end while utilising SEMI relative to ARC. This study evinces that individual differences are greater than observed changes in extreme wrist orientations for both propulsion styles. Practitioner Summary: How wheelchair propulsion styles change with fatigue in terms of extreme wrist orientations was examined. This study evinces that individual differences are greater than observed changes in extreme wrist orientations for both propulsion styles and point towards the need for future research on individual differences utilising propulsion styles.

Impact of rivastigmine on costs and on time spent in caregiving for families of patients with Alzheimer's disease.

Science.gov (United States)

Marin, Deborah; Amaya, Karine; Casciano, Roman; Puder, Katherine L; Casciano, Julian; Chang, Sobin; Snyder, Edward H; Cheng, Isaac; Cuccia, Anthony J

2003-12-01

Alzheimer's disease (AD) places a significant burden on health care systems worldwide. As new treatments are developed, their cost-effectiveness is often assessed to help health care professionals make informed decisions. In addition to the more common practice of assessing direct medical costs, indirect costs, including time spent in caregiving, should be evaluated. This study examined the potential effects of the dual cholinesterase inhibitor rivastigmine (Exelon) on caregivers of patients with AD. Results from two 26-week, placebo-controlled trials have demonstrated the clinically relevant and statistically significant efficacy of rivastigmine (6-12 mg/day) compared to placebo, on cognition, activities of daily living, and global functioning. By delaying progression of AD, significant savings in caregiver burden are anticipated, as measured by time spent caregiving and its related costs. Data collected in a prospective, observational study of AD patients and their caregivers were used to establish the relationship between disease severity (based on Mini-Mental State Examination [MMSE] score) and time spent caregiving (according to the 5-item Caregivers Activity Survey score). A significant correlation was observed between the two scores (N = 43, r = -.56, p patients with mild AD (MMSE score 21-30), resulting in a total savings of approximately 11,253 dollars. Treatment of patients with moderately severe AD was also evaluated. The trend was similar but the impact was less, suggesting an economic benefit to early therapy. Early diagnosis and a pharmacologic intervention that allows the patients to remain at home longer by delaying disease progression would have a beneficial impact on patients, caregivers, and payers, and should therefore be encouraged through initiatives designed to identify and treat patients early in the course of disease.

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

International Nuclear Information System (INIS)

PICKETT, W.W.

2000-01-01

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. Because this sub-project is still in the construction/start-up phase, all verification activities have not yet been performed (e.g., canister cover cap and welding fixture system verification, MCO Internal Gas Sampling equipment verification, and As-built verification.). The verification activities identified in this report that still are to be performed will be added to the start-up punchlist and tracked to closure

Design Verification Report Spent Nuclear Fuel (SNF) Project Canister Storage Building (CSB)

Energy Technology Data Exchange (ETDEWEB)

PICKETT, W.W.

2000-09-22

The Sub-project W379, ''Spent Nuclear Fuel Canister Storage Building (CSB),'' was established as part of the Spent Nuclear Fuel (SNF) Project. The primary mission of the CSB is to safely store spent nuclear fuel removed from the K Basins in dry storage until such time that it can be transferred to the national geological repository at Yucca Mountain Nevada. This sub-project was initiated in late 1994 by a series of studies and conceptual designs. These studies determined that the partially constructed storage building, originally built as part of the Hanford Waste Vitrification Plant (HWVP) Project, could be redesigned to safely store the spent nuclear fuel. The scope of the CSB facility initially included a receiving station, a hot conditioning system, a storage vault, and a Multi-Canister Overpack (MCO) Handling Machine (MHM). Because of evolution of the project technical strategy, the hot conditioning system was deleted from the scope and MCO welding and sampling stations were added in its place. This report outlines the methods, procedures, and outputs developed by Project W379 to verify that the provided Structures, Systems, and Components (SSCs): satisfy the design requirements and acceptance criteria; perform their intended function; ensure that failure modes and hazards have been addressed in the design; and ensure that the SSCs as installed will not adversely impact other SSCs. Because this sub-project is still in the construction/start-up phase, all verification activities have not yet been performed (e.g., canister cover cap and welding fixture system verification, MCO Internal Gas Sampling equipment verification, and As-built verification.). The verification activities identified in this report that still are to be performed will be added to the start-up punchlist and tracked to closure.

Comparison of spent fuel management fee collection alternatives

International Nuclear Information System (INIS)

White, M.K.; Engel, R.L.

1979-01-01

Five alternative methods for recovering the costs of spent fuel management were evaluated. These alternatives consist of collecting the fee for various components of spent fuel management cost (AFR basin storage, transportation from AFR basin to the repository, packaging, repository, R and D, and government overhead) at times ranging from generation of power to delivery of the spent fuel to the government. The five fee collection mechanisms were analyzed to determine how well they serve the interests of the public and the electricity ratepayer

Plan for characterization of K Basin spent nuclear fuel and sludge

International Nuclear Information System (INIS)

Lawrence, L.A.; Marschman, S.C.

1995-06-01

This plan outlines a characterization program that supports the accelerated Path Forward scope and schedules for the Spent Nuclear Fuel stored in the Hanford K Basins. This plan is driven by the schedule to begin fuel transfer by December 1997. The program is structured for 4 years and is limited to in-situ and laboratory examinations of the spent nuclear fuel and sludge in the K East and K West Basins. The program provides bounding behavior of the fuel, and verification and acceptability for three different sludge disposal pathways. Fuel examinations are based on two shipping campaigns for the K West Basin and one from the K East Basin. Laboratory examinations include physical condition, hydride and oxide content, conditioning testing, and dry storage behavior

A report on the transport of MTR-type spent fuel assemblies of the Philippine Research Reactor (PRR-1)

International Nuclear Information System (INIS)

Yoshisaki, Magno B.; Leopando, Leonardo S.

1999-03-01

Fifty one (51) fuel assemblies of mixed enrichment from the Philippine Research Reactor (PRR-1), consisting of 50 spent and 1 fresh, were shipped to the United States last 14 March 1999 under the U.S. Return of Foreign Research Reactor (FRR) fuel policy. The shipment was in line with the U.S. initiative to implement its Record of Decision (ROD) which took effect on 13 May 1996 to accept and manage all FRR uranium fuel of U.S. origin and enriched in the United States. The shipment program would last10 years, ending midnight of 13 May 2006. The ROD provided a 3 year extension period within which to accept FRR spent nuclear fuel (SNF) withdrawn from reactors after 2006. The U.S. policy gave priority to the NPT significance of high enriched U, as the prime target of the return of FRR policy. Classified as a developing country, the Philippines, through the PNRI, signed a contract with the U.S. Department of Energy for the cost-free shipment of PRR-1 spent fuel to the United States. Spent fuel loading and transport operations to the port area lasted seven (7) days, from 8 to 14 March 1999. (Author)

The role of spent fuel test facilities in the fuel cycle strategy

International Nuclear Information System (INIS)

Huang, S. T.; Gross, D. L.; Snyder, N. W.; Woods, W. D.

1988-01-01

Disposal of commercial spent nuclear fuels in the major industrialized countries may be categorized into two broad approaches: a once-through policy which will dispose of spent fuels and recycle fissile materials. Within reprocess spent fuels and recycle fissile materials. Within each policy, various technical, licensing, institutional and public issues exist. These issues tend to complicate the formulation of an effective and acceptable fuel cycle strategy which will meet various cost, schedule, and legislative constraints. This paper examines overall fuel cycle strategies from the viewpoint of these underlying technical issues and assesses the roles of spent fuel test facilities in the overall fuel cycles steps. Basic functions of such test facilities are also discussed. The main emphasis is placed on the once-through policy although the reprocessing / recycle policy is also discussed. Benefits of utilizing test facilities in the fuel cycle strategies are explored. The results indicate that substantial benefits may be obtained in terms of minimizing programmatic risks, increasing public confidence, and more effective utilization of overall budgetary resources by structuring and highlighting the test facilities as an important element in the overall strategy

Simulating thermal behavior of AECL's spent fuel dry storage system with CATHENA

International Nuclear Information System (INIS)

Sabourin, G.

1998-01-01

This paper documents the comparisons between CATHENA predictions and temperature measurements taken at the Gentilly-2 NPP spent fuel dry storage facility and in a mock--up of a storage basket placed inside a storage cylinder. It also presents CATHENA temperature predictions related to the storage of spent fuel in MACSTOR modules as planned for Ignalina NPP, Lithuania. CATHENA has been chosen because it can simulate many noncondensable gases including air and helium, and because of its great flexibility in the representation of the MACSTOR module geometry. The results of the simulations show good agreement with the experimental measurements. The two comparisons indicate that CATHENA can be used to simulate heat transfer from the fuel to the external air circuit of the spent fuel dry storage system. For the Ignalina MACSTOR module, containing RBMK fuel having higher heat release than typical CANDU fuel, CATHENA predicts that the maximum fuel temperature is expected to be around 240 deg C, giving an acceptable margin below the maximum allowed temperature of 300 deg C. In conclusion, this paper shows that the thermalhydraulic code CATHENA can accurately predict the thermal behavior AECL's air cooled spent fuel dry storage system. (author)

Cost analysis of spent nuclear fuel management

International Nuclear Information System (INIS)

Robertson, D.L.M.; Ford, L.M.

1993-01-01

The Department of Energy Civilian Radioactive Waste Management System (CRWMS) is chartered to develop a waste management system for the safe disposal of spent nuclear fuel (SNF) from the 131 nuclear power reactors in the United States and a certain amount of high level waste (HLW) from reprocessing operations. The current schedule is to begin accepting SNF in 1998 for storage at a Monitored Retrievable Storage (MRS) facility. Subsequently, beginning in 2010, the system is scheduled to begin accepting SNF at a permanent geologic repository in 2010 and HLW in 2015. At this time, a MRS site has not been selected. Yucca Mountain, Nevada is currently being evaluated as the candidate site for the repository for permanent geologic disposal of SNF. All SNF, with the possible exception of the SNF from the western reactors, is currently planned to be shipped to or through the MRS site en route to the repository. The repository will operate in an acceptance and performance confirmation phase for a 50 year period beginning in 2010 with an additional nine year closure and five year decontamination and decommissioning period. The MRS has a statutory maximum capacity of 15,000 Metric Tons Uranium (MTU), with a further restriction that it may not store more than 10,000 MTU until the repository begins accepting waste. The repository is currently scheduled to store 63,000 MTU of SNF and an additional 7,000 MTU equivalent of HLW for a total capacity of 70,000 MTU. The amended act specified the MRS storage limits and identified Yucca Mountain as the only site to be characterized. Also, an Office of the Nuclear Waste Negotiator was established to secure a voluntary host site for the MRS. The MRS, the repository, and all waste containers/casks will go through a Nuclear Regulatory Commission licensing process much like the licensing process for a nuclear power plant. Environmental assessments and impact statements will be prepared for both the MRS and repository

Comparative analysis of LWR and FBR spent fuels for nuclear forensics evaluation

International Nuclear Information System (INIS)

Permana, Sidik; Suzuki, Mitsutoshi; Su'ud, Zaki

2012-01-01

Some interesting issues are attributed to nuclide compositions of spent fuels from thermal reactors as well as fast reactors such as a potential to reuse as recycled fuel, and a possible capability to be manage as a fuel for destructive devices. In addition, analysis on nuclear forensics which is related to spent fuel compositions becomes one of the interesting topics to evaluate the origin and the composition of spent fuels from the spent fuel foot-prints. Spent fuel compositions of different fuel types give some typical spent fuel foot prints and can be estimated the origin of source of those spent fuel compositions. Some technics or methods have been developing based on some science and technological capability including experimental and modeling or theoretical aspects of analyses. Some foot-print of nuclear forensics will identify the typical information of spent fuel compositions such as enrichment information, burnup or irradiation time, reactor types as well as the cooling time which is related to the age of spent fuels. This paper intends to evaluate the typical spent fuel compositions of light water (LWR) and fast breeder reactors (FBR) from the view point of some foot prints of nuclear forensics. An established depletion code of ORIGEN is adopted to analyze LWR spent fuel (SF) for several burnup constants and decay times. For analyzing some spent fuel compositions of FBR, some coupling codes such as SLAROM code, JOINT and CITATION codes including JFS-3-J-3.2R as nuclear data library have been adopted. Enriched U-235 fuel composition of oxide type is used for fresh fuel of LWR and a mixed oxide fuel (MOX) for FBR fresh fuel. Those MOX fuels of FBR come from the spent fuels of LWR. Some typical spent fuels from both LWR and FBR will be compared to distinguish some typical foot-prints of SF based on nuclear forensic analysis.

Comparative analysis of LWR and FBR spent fuels for nuclear forensics evaluation

Energy Technology Data Exchange (ETDEWEB)

Permana, Sidik; Suzuki, Mitsutoshi; Su' ud, Zaki [Department of Science and Technology for Nuclear Material Management (STNM), Japan Atomic Energy Agency (JAEA), 2-4 Shirane, Shirakata, Tokai Mura, Naka-gun, Ibaraki 319-1195 Nuclear Physics and Bio (Indonesia); Department of Science and Technology for Nuclear Material Management (STNM), Japan Atomic Energy Agency (JAEA), 2-4 Shirane, Shirakata, Tokai Mura, Naka-gun, Ibaraki 319-1195 (Japan); Nuclear Physics and Bio Physics Research Group, Department of Physics, Bandung Institute of Technology, Gedung Fisika, Jl. Ganesha 10, Bandung 40132 (Indonesia)

2012-06-06

Some interesting issues are attributed to nuclide compositions of spent fuels from thermal reactors as well as fast reactors such as a potential to reuse as recycled fuel, and a possible capability to be manage as a fuel for destructive devices. In addition, analysis on nuclear forensics which is related to spent fuel compositions becomes one of the interesting topics to evaluate the origin and the composition of spent fuels from the spent fuel foot-prints. Spent fuel compositions of different fuel types give some typical spent fuel foot prints and can be estimated the origin of source of those spent fuel compositions. Some technics or methods have been developing based on some science and technological capability including experimental and modeling or theoretical aspects of analyses. Some foot-print of nuclear forensics will identify the typical information of spent fuel compositions such as enrichment information, burnup or irradiation time, reactor types as well as the cooling time which is related to the age of spent fuels. This paper intends to evaluate the typical spent fuel compositions of light water (LWR) and fast breeder reactors (FBR) from the view point of some foot prints of nuclear forensics. An established depletion code of ORIGEN is adopted to analyze LWR spent fuel (SF) for several burnup constants and decay times. For analyzing some spent fuel compositions of FBR, some coupling codes such as SLAROM code, JOINT and CITATION codes including JFS-3-J-3.2R as nuclear data library have been adopted. Enriched U-235 fuel composition of oxide type is used for fresh fuel of LWR and a mixed oxide fuel (MOX) for FBR fresh fuel. Those MOX fuels of FBR come from the spent fuels of LWR. Some typical spent fuels from both LWR and FBR will be compared to distinguish some typical foot-prints of SF based on nuclear forensic analysis.

Conditioning of spent nuclear fuel for permanent disposal

International Nuclear Information System (INIS)

Laidler, J.J.

1994-01-01

A compact, efficient method for conditioning spent nuclear fuel is under development This method, known as pyrochemical processing, or open-quotes pyroprocessing,close quotes provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the United States Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (99.9%) separation of transuranics. The resultant waste forms from the pyroprocess are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and preclude the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory

Conditioning of spent nuclear fuel for permanent disposal

International Nuclear Information System (INIS)

Laidler, J.J.

1994-01-01

A compact, efficient method for conditioning spent nuclear fuel is under development. This method, known as pyrochemical processing, or pyroprocessing, provides a separation of fission products from the actinide elements present in spent fuel and further separates pure uranium from the transuranic elements. The process can facilitate the timely and environmentally-sound treatment of the highly diverse collection of spent fuel currently in the inventory of the US Department of Energy (DOE). The pyroprocess utilizes elevated-temperature processes to prepare spent fuel for fission product separation; that separation is accomplished by a molten salt electrorefining step that provides efficient (> 99.9%) separation of transuranics. The resultant waste forms from the pyroprocess are stable under envisioned repository environment conditions and highly leach-resistant. Treatment of any spent fuel type produces a set of common high-level waste forms, one a mineral and the other a metal alloy, that can be readily qualified for repository disposal and that avoid the substantial costs that would be associated with the qualification of the numerous spent fuel types included in the DOE inventory

Protective effect of time spent walking on risk of stroke in older men.

Science.gov (United States)

Jefferis, Barbara J; Whincup, Peter H; Papacosta, Olia; Wannamethee, S Goya

2014-01-01

Older adults have the highest risks of stroke and the lowest physical activity levels. It is important to quantify how walking (the predominant form of physical activity in older age) is associated with stroke. A total of 4252 men from a UK population-based cohort reported usual physical activity (regular walking, cycling, recreational activity, and sport) in 1998 to 2000. Nurses took fasting blood samples and made anthropometric measurements. Among 3435 ambulatory men free from cardiovascular disease and heart failure in 1998 to 2000, 195 first strokes occurred during 11-year follow-up. Men walked a median of 7 (interquartile range, 3-12) hours/wk; walking more hours was associated with lower heart rate, D-dimer, and higher forced expiratory volume in 1 second. Compared with men walking 0 to 3 hours/wk, men walking 4 to 7, 8 to 14, 15 to 21, and >22 hours had age- and region-adjusted hazard ratios (95% confidence intervals) for stroke of 0.89 (0.60-1.31), 0.63 (0.40-1.00), 0.68 (0.35-1.32), and 0.36 (0.14-0.91), respectively, P (trend)=0.006. Hazard ratios were somewhat attenuated by adjustment for established and novel risk markers (inflammatory and hemostatic markers and cardiac function [N-terminal pro-brain natriuretic peptide]) and walking pace, but linear trends remained. There was little evidence for a dose-response relationship between walking pace and stroke; comparing average pace or faster to a baseline of slow pace, the hazard ratio for stroke was 0.65 (95% confidence interval, 0.44-0.97), which was fully mediated by time spent walking. Time spent walking was associated with reduced risk of onset of stroke in dose-response fashion, independent of walking pace. Walking could form an important part of stroke-prevention strategies in older people.

ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

Energy Technology Data Exchange (ETDEWEB)

Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2015-10-15

The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management.

ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

International Nuclear Information System (INIS)

Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo

2015-01-01

The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management

Economics of spent LWR fuel storage

International Nuclear Information System (INIS)

Clark, H.J.

1980-01-01

A low cost option for spent fuel inventories would be to ship excess fuel from the overburdened reactor to another reactor in the utility's system that has available space. The only cost would be for cask leasing and shipping. Three other alternatives all require considerable capital expenditures: reracking, new at-reactor (AR) storage facilities, and away-from-reactor (AFR) storage facilities. Fuel storage requirements will be met best by transfer of fuel or by re-racking existing reactor basins whenever these options are available. These alternatives represent not only the lowest cost storage options but also the most timely. Fuel can be shipped to other storage pools for about $10/kg depending on the distance, while costs for reracking range from $18 to 25/kg depending on the approach. These alternatives are recognized to face environmental and regulatory obstacles. However, such obstacles should be less severe than similar issues that would be encountered with AR or AFR basin storage. When storage requirements cannot be met by the first two options, the next least costly alternative for most utilities will be use of a Federal AFR. Storage cost of about $137/kg at an AFR are less costly than charges of up to $350/kg that could be incurred by the use of AR basins. AR basins are practical only when a utility requires storage capacity to accommodate annual additions of 100 MT or more of spent fuel. The large reactor complexes discharging this much feul are not currently those that require relief from fuel storage problems. A recent development in Germany may offer an AR alternative of dry storage in transportation/storage casks at a cost of $200/kg; however, this method has not yet been accepted and licensed for use in the US

Time perception and illness acceptance among remitting-relapsing multiple sclerosis patients under treatment.

Science.gov (United States)

Król, Joanna; Szcześniak, Małgorzata; Koziarska, Dorota; Rzepa, Teresa

2015-01-01

The aim of the study was to determine temporal orientation in patients diagnosed with RR-MS as compared with that of healthy individuals; to analyse self-evaluated acceptance levels in terms of physical and psychological condition and self-reliance; an attempt to identify factors of illness acceptance in patients with RR-MS including temporal perspective. Acceptance of Illness Scale (AIS, adapted into Polish by Z. Juczyński), Zimbardo Time Perspective Inventory (ZTPI, adapted into Polish by M. Mażewski), and original interview aimed to assess socio-demographic data and self-evaluated physical as well as psychological condition and self-reliance of patients with MS (referred to the neurological testing according to the EDSS). Patients with RR-MS focus on fatalistic and hedonistic present more than healthy individuals. They also tend to reflect on their negative past experience. Acceptance of illness correlated positively with subjective assessment of physical and psychological condition as well as self-reliance, and negatively with objective disability score (measured with the use of EDSS) and a factor considering time of disease duration. Avoiding contemplation of negative past and concentrating on hedonistic future constitute significant predictors of illness acceptance. These results may be of importance in terms of holistic approach to treatment of RR-MS patients. In the initial stage of the disease progression, patients might benefit from psychological support due to change in temporal orientation.

MTR radiological database for SRS spent nuclear fuel facilities

International Nuclear Information System (INIS)

Blanchard, A.

2000-01-01

A database for radiological characterization of incoming Material Test Reactor (MTR) fuel has been developed for application to the Receiving Basin for Offsite Fuels (RBOF) and L-Basin spent fuel storage facilities at the Savannah River Site (SRS). This database provides a quick quantitative check to determine if SRS bound spent fuel is radiologically bounded by the Reference Fuel Assembly used in the L-Basin and RBOF authorization bases. The developed database considers pertinent characteristics of domestic and foreign research reactor fuel including exposure, fuel enrichment, irradiation time, cooling time, and fuel-to-moderator ratio. The supplied tables replace the time-consuming studies associated with authorization of SRS bound spent fuel with simple hand calculations. Additionally, the comprehensive database provides the means to overcome resource limitations, since a series of simple, yet conservative, hand calculations can now be performed in a timely manner and replace computational and technical staff requirements

Spent fuel management in Japan

International Nuclear Information System (INIS)

Shirahashi, K.; Maeda, M.; Nakai, T.

1996-01-01

Japan has scarce energy resources and depends on foreign resources for 84% of its energy needs. Therefore, Japan has made efforts to utilize nuclear power as a key energy source since mid-1950's. Today, the nuclear energy produced from 49 nuclear power plants is responsible for about 31% of Japan's total electricity supply. The cumulative amount of spent fuel generated as of March 1995 was about 11,600 Mg U. Japan's policy of spent fuel management is to reprocess spent nuclear fuel and recycle recovered plutonium and uranium as nuclear fuel. The Tokai reprocessing plant continues stable operation keeping the annual treatment capacity or around 90 Mg U. A commercial reprocessing plant is under construction at Rokkasho, northern part of Japan. Although FBR is the principal reactor to use plutonium, LWR will be a major power source for some time and recycling of the fuel in LWRs will be prompted. (author). 3 figs

The associations between self-reported sleep duration and adolescent health outcomes: what is the role of time spent on Internet use?

Science.gov (United States)

Do, Young Kyung; Shin, Eunhae; Bautista, Mary Ann; Foo, Kelvin

2013-02-01

This study aimed to examine the associations of self-reported sleep duration with adolescent health outcomes, taking into account time spent on Internet use. We used data from the 2008-2009 Korea Youth Behavioral Risk Factor Survey, a cross-sectional online survey of middle and high school students aged 13-18years in South Korea (N=136,589) to examine the associations of self-reported sleep duration with four mental and physical health measures, e.g. self-report of depressive symptoms, suicidal ideation, weight status, and self-rated health. The binary logit and generalized ordered logit models controlled for time spent on Internet use for non-study purposes and other factors. Shorter self-reported sleep duration was associated with a higher likelihood of reporting depressive symptoms, suicidal ideation, and overweight or obese status, and a lower likelihood of reporting better self-rated health, even after accounting for time spent on Internet use. Excessive Internet use was found to be an independent risk factor for these outcomes. Among in-school adolescents in South Korea, shorter sleep duration and excessive Internet use are independently and additively associated with multiple indicators of adverse health status. Excessive Internet use may have not only direct adverse health consequences, but also have indirect negative effects through sleep deprivation. Copyright © 2012 Elsevier B.V. All rights reserved.

Corrosion of Spent Nuclear Fuel: The Long-Term Assessment

International Nuclear Information System (INIS)

Ewing, Rodney C.

2003-01-01

The successful disposal of spent nuclear fuel (SNF) is one of the most serious challenges to the successful completion of the nuclear fuel cycle and the future of nuclear power generation. In the United States, 21 percent of the electricity is generated by 107 commercial nuclear power plants (NPP), each of which generates 20 metric tons of spent nuclear fuel annually. In 1996, the total accumulation of spent nuclear fuel was 33,700 metric tons of heavy metal (MTHM) stored at 70 sites around the country. The end-of-life projection for current nuclear power plants (NPP) is approximately 86,000 MTHM. In the proposed nuclear waste repository at Yucca Mountain over 95% of the radioactivity originates from spent nuclear fuel. World-wide in 1998, approximately 130,000 MTHM of SNF have accumulated, most of it located at 236 NPP in 36 countries. Annual production of SNF is approximately 10,000 MTHM, containing about 100 tons of ''reactor grade'' plutonium. Any reasonable increase in the proportion of energy production by NPP, i.e., as a substitute for hydrocarbon-based sources of energy, will significantly increase spent nuclear fuel production. Spent nuclear fuel is essentially UO 2 with approximately 4-5 atomic percent actinides and fission product elements. A number of these elements have long half-lives hence, the long-term behavior of the UO 2 is an essential concern in the evaluation of the safety and risk of a repository for spent nuclear fuel. One of the unique and scientifically most difficult aspects of the successful disposal of spent nuclear fuel is the extrapolation of short-term laboratory data (hours to years) to the long time periods (10 3 to 10 5 years) as required by the performance objectives set in regulations, i.e. 10 CFR 60. The direct verification of these extrapolations or interpolations is not possible, but methods must be developed to demonstrate compliance with government regulations and to satisfy the public that there is a reasonable basis for

Spent fuel management

International Nuclear Information System (INIS)

2005-01-01

The production of nuclear electricity results in the generation of spent fuel that requires safe, secure and efficient management. Appropriate management of the resulting spent fuel is a key issue for the steady and sustainable growth of nuclear energy. Currently about 10,000 tonnes heavy metal (HM) of spent fuel are unloaded every year from nuclear power reactors worldwide, of which 8,500 t HM need to be stored (after accounting for reprocessed fuel). This is the largest continuous source of civil radioactive material generated, and needs to be managed appropriately. Member States have referred to storage periods of 100 years and even beyond, and as storage quantities and durations extend, new challenges arise in the institutional as well as in the technical area. The IAEA gives high priority to safe and effective spent fuel management. As an example of continuing efforts, the 2003 International Conference on Storage of Spent Fuel from Power Reactors gathered 125 participants from 35 member states to exchange information on this important subject. With its large number of Member States, the IAEA is well-positioned to gather and share information useful in addressing Member State priorities. IAEA activities on this topic include plans to produce technical documents as resources for a range of priority topics: spent fuel performance assessment and research, burnup credit applications, cask maintenance, cask loading optimization, long term storage requirements including records maintenance, economics, spent fuel treatment, remote technology, and influence of fuel design on spent fuel storage. In addition to broader topics, the IAEA supports coordinated research projects and technical cooperation projects focused on specific needs

Need for Asian regional spent fuel recycle center (ARRC)

International Nuclear Information System (INIS)

Yamamura, Osamu

2009-01-01

Energy demand is increasing rapidly in the Asia-Pacific region. From the viewpoint of preventing global warming, countries in the region are expected to introduce more nuclear power plants (NPPs) which do not emit greenhouse gases (GHGs). At the end of this century, the capacity for NPPs is estimated to reach around 1600 GWe and around 300,000 tons of uranium (TU) as spent fuel will be accumulated. The spent fuel from the NPPs should be reprocessed and fabricated into MOX fuel to decrease the amounts of radioactive wastes and future fuel recycling should be supported in the Asian Regional Spent Fuel Recycle Center (ARRC) under international regulation. The ARRC will include a reprocessing plant, an MOX fuel fabrication plant, a high-activity vitrified solid waste storage facility, and sea discharge pipes for extremely low activity liquid wastes etc. Furthermore, the ARRC should be operated as a component in an international organization scheme, an ASIATOM and it should accept the full scope of IAEA safeguards to verify the nonproliferation of nuclear materials. When the ARRC is designed, knowledge obtained through experiences in the Tokai and the Rokkasho reprocessing plants in Japan, which is a non-nuclear weapons country, will be used. (author)

The Question of Queue: Implications for -Best Practice- in Cross-country Transport of Commercial Spent Nuclear Fuel

International Nuclear Information System (INIS)

Williams, J.M.

2009-01-01

The 'Standard Contract' authorized by the Nuclear Waste Policy Act of 1982 (Section 302(a)) provides that priority for acceptance of spent nuclear fuel (SNF) shall be based on the date of its discharge from civilian nuclear reactors. Through 2007, about 2,100 discharges of about 58,000 metric tons have created a priority ranking (or 'queue') for US DOE spent fuel acceptance and transport. Since 1982, consideration of the task of large-scale, cross-country SNF transport (by the National Academies and others) has led to several recommendations for 'best practice' in such an unprecedented campaign. Many of these recommendations, however, are inconsistent with the acceptance priority established by the Standard Contract, and in fact cannot be implemented under its provisions. This paper considers the SNF acceptance rankings established by the Standard Contract, and the barrier these place on best practice cross-country transport of the nation's inventory of SNF. Using a series of case studies, the paper explores the challenge of best practice transport from selected shipment origins under current arrangements. The case studies support preliminary conclusions regarding the inconsistency between best practice SNF transport and the Standard Contract acceptance queue, with reference to particular origins sites and their utility owners. The paper concludes with a suggestion for resolving the inconsistencies, and recommended next steps in the inquiry. (authors)

Canadian Public and Stake holder Engagement Approach to a Spent Nuclear Fuel Management

Energy Technology Data Exchange (ETDEWEB)

Hwang, Yong Soo; Kim, Youn Ok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Whang, Joo Ho [Kyunghee University, Yongin (Korea, Republic of)

2008-09-15

has been also having a hard time in dealing with spent nuclear fuel management, all of these efforts that Canada has made with a PSE program would give good lessons and implications to the Korean case. In conclusion, as a deliberative participation program, PSE could be a possible breakthrough approach for the Korean spent nuclear fuel management.

Canadian Public and Stake holder Engagement Approach to a Spent Nuclear Fuel Management

International Nuclear Information System (INIS)

Hwang, Yong Soo; Kim, Youn Ok; Whang, Joo Ho

2008-01-01

has been also having a hard time in dealing with spent nuclear fuel management, all of these efforts that Canada has made with a PSE program would give good lessons and implications to the Korean case. In conclusion, as a deliberative participation program, PSE could be a possible breakthrough approach for the Korean spent nuclear fuel management.

Spent fuel workshop'2002

International Nuclear Information System (INIS)

Poinssot, Ch.

2002-01-01

This document gathers the transparencies of the presentations given at the 2002 spent fuel workshop: Session 1 - Research Projects: Overview on the IN CAN PROCESSES European project (M. Cowper), Overview on the SPENT FUEL STABILITY European project (C. Poinssot), Overview on the French R and D project on spent fuel long term evolution, PRECCI (C. Poinssot); Session 2 - Spent Fuel Oxidation: Oxidation of uranium dioxide single crystals (F. Garrido), Experimental results on SF oxidation and new modeling approach (L. Desgranges), LWR spent fuel oxidation - effects of burn-up and humidity (B. Hanson), An approach to modeling CANDU fuel oxidation under dry storage conditions (P. Taylor); Session 3 - Spent Fuel Dissolution Experiments: Overview on high burnup spent fuel dissolution studies at FZK/INE (A. Loida), Results on the influence of hydrogen on spent fuel leaching (K. Spahiu), Leaching of spent UO 2 fuel under inert and reducing conditions (Y. Albinsson), Fuel corrosion investigation by electrochemical techniques (D. Wegen), A reanalysis of LWR spent fuel flow through dissolution tests (B. Hanson), U-bearing secondary phases formed during fuel corrosion (R. Finch), The near-field chemical conditions and spent fuel leaching (D. Cui), The release of radionuclides from spent fuel in bentonite block (S.S. Kim), Trace actinide behavior in altered spent fuel (E. Buck, B. Hanson); Session 4 - Radiolysis Issues: The effect of radiolysis on UO 2 dissolution determined from electrochemical experiments with 238 Pu doped UO 2 M. Stroess-Gascoyne (F. King, J.S. Betteridge, F. Garisto), doped UO 2 studies (V. Rondinella), Preliminary results of static and dynamic dissolution tests with α doped UO 2 in Boom clay conditions (K. Lemmens), Studies of the behavior of UO 2 / water interfaces under He 2+ beam (C. Corbel), Alpha and gamma radiolysis effects on UO 2 alteration in water (C. Jegou), Behavior of Pu-doped pellets in brines (M. Kelm), On the potential catalytic behavior of

The psychosocial consequences of spent fuel disposal

International Nuclear Information System (INIS)

Paavola, J.; Eraenen, L.

1999-03-01

In this report the potential psychosocial consequences of spent fuel disposal to inhabitants of a community are assessed on the basis of earlier research. In studying the situation, different interpretations and meanings given to nuclear power are considered. First, spent fuel disposal is studied as fear-arousing and consequently stressful situation. Psychosomatic effects of stress and coping strategies used by an individual are presented. Stress as a collective phenomenon and coping mechanisms available for a community are also assessed. Stress reactions caused by natural disasters and technological disasters are compared. Consequences of nuclear power plant accidents are reviewed, e.g. research done on the accident at Three Mile Island power plant. Reasons for the disorganising effect on a community caused by a technological disaster are compared to the altruistic community often seen after natural disasters. The potential reactions that a spent fuel disposal plant can arouse in inhabitants are evaluated. Both short-term and long-term reactions are evaluated as well as reactions under normal functioning, after an incident and as a consequence of an accident. Finally an evaluation of how the decision-making system and citizens' opportunity to influence the decision-making affect the experience of threat is expressed. As a conclusion we see that spent fuel disposal can arouse fear and stress in people. However, the level of the stress is probably low. The stress is at strongest at the time of the starting of the spent fuel disposal plant. With time people get used to the presence of the plant and the threat experienced gets smaller. (orig.)

Preliminary Calculation on a Spent Fuel Pool Accident using GOTHIC

Energy Technology Data Exchange (ETDEWEB)

Park, Jaehwan; Choi, Yu Jung; Hong, Tae Hyub; Kim, Hyeong-Taek [KHNP-CRI, Daejeon (Korea, Republic of)

2015-10-15

The probability of an accident happening at the spent fuel pool was believed to be quite low until the 2011 Fukushima accident occurred. Notably, large amount of spent fuel are normally stored in the spent fuel pool for a long time compared to the amount of fuel in the reactor core and the total heat released from the spent fuel is high enough to boil the water of the spent fuel pool when the cooling system does not operate. In addition, the enrichment and the burnup of the fuel have both increased in the past decade and heat generation from the spent fuel thereby has also increased. The failure of the cooling system at the spent fuel pool (hereafter, a loss-of-cooling accident) is one of the principal hypothetical causes of an accident that could occur at the spent fuel pool. In this paper, the preliminary calculation of a loss-of-cooling accident was performed. In this paper, the preliminary calculation of a loss-of cooling accident was performed with GOTHIC. The calculation results show boiling away of water in the spent fuel pool due to the loss-of-cooling accident and similar thermal performance of the spent fuel pool with previous research results.

The impact of a Critical Care Information System (CCIS) on time spent charting and in direct patient care by staff in the ICU: a review of the literature.

Science.gov (United States)

Mador, Rebecca L; Shaw, Nicola T

2009-07-01

The introduction of a Critical Care Information System (CCIS) into an intensive care unit (ICU) is purported to reduce the time health care providers (HCP) spend on documentation and increase the time available for direct patient care. However, there is a paucity of rigorous empirical research that has investigated these assertions. Moreover, those studies that have sought to elucidate the relationship between the introduction of a CCIS and the time spent by staff on in/direct patient care activities have published contradictory findings. The objective of this literature review is to establish the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. Five electronic databases were searched including PubMed Central, EMBASE, CINAHL, IEEE Xplore, and the Cochrane Database of Systematic Reviews. Reference lists of all published papers were hand searched, and citations reviewed to identify extra papers. We included studies that were empirical articles, published in English, and provided original data on the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. In total, 12 articles met the inclusion criteria. Workflow analysis (66%) and time-and-motion analysis (25%) were the most common forms of data collection. Three (25%) studies found an increase in time spent charting, five (42%) found no difference, and four (33%) studies reported a decrease. Results on the impact of a CCIS on direct patient care were similarly inconclusive. Due to the discrepant findings and several key methodological issues, the impact of a CCIS on time spent charting and in direct patient care remains unclear. This review highlights the need for an increase in rigorous empirical research in this area and provides recommendations for the design and implementation of future studies.

Impacts of the use of spent nuclear fuel burnup credit on DOE advanced technology legal weight truck cask GA-4 fleet size

International Nuclear Information System (INIS)

Mobasheran, A.S.; Boshoven, J.; Lake, B.

1995-01-01

The object of this paper is to study the impact of full and partial spent fuel burnup credit on the capacity of the Legal Weight Truck Spent Fuel Shipping Cask (GA-4) and to determine the numbers of additional spent fuel assemblies which could be accommodated as a result. The scope of the study comprised performing nuclear criticality safety scoping calculations using the SCALE-PC software package and the 1993 spent fuel database to determine logistics for number of spent fuel assemblies to be shipped. The results of the study indicate that more capacity than 2 or 3 pressurized water reactor assemblies could be gained for GA-4 casks when burnup credit is considered. Reduction in GA-4 fleet size and number of shipments are expected to result from the acceptance of spent fuel burnup credit

Main attributes influencing spent nuclear fuel management

International Nuclear Information System (INIS)

Andreescu, N.; Ohai, D.

1997-01-01

All activities regarding nuclear fuel, following its discharge from the NPP, constitute the spent fuel management and are grouped in two possible back end variants, namely reprocessing (including HLW vitrification and geological disposal) and direct disposal of spent fuel. In order to select the appropriate variant it is necessary to analyse the aggregate fulfillment of the imposed requirements, particularly of the derived attributes, defined as distinguishing characteristics of the factors used in the decision making process. The main identified attributes are the following: - environmental impact, - availability of suitable sites, - non-proliferation degree, -strategy of energy, - technological complexity and technical maturity, -possible further technical improvements, - size of nuclear programme, - total costs, - public acceptance, - peculiarity of CANDU fuel. The significance of the attributes in the Romanian case, taking into consideration the present situation, as a low scenario and a high scenario corresponding to an important development of the nuclear power, after the year 2010, is presented. According to their importance the ranking of attributes is proposed . Subsequently, the ranking could be used for adequate weighing of attributes in order to realize a multi-criteria analysis and a relevant comparison of back end variants. (authors)

Neutron absorber qualification and acceptance testing from the designer's perspective

International Nuclear Information System (INIS)

Bracey, W.; Chiocca, R.

2004-01-01

Starting in the mid 1990's, the USNRC began to require less than 100% credit for the 10B present in fixed neutron absorbers spent fuel transport packages. The current practice in the US is to use only 75% of the specified 10B in criticality safety calculations unless extensive acceptance testing demonstrates both the presence of the 10B and uniformity of its distribution. In practice, the NRC has accepted no more than 90% credit for 10B in recent years, while other national competent authorities continue to accept 100%. More recently, with the introduction of new neutron absorber materials, particularly aluminum / boron carbide metal matrix composites, the NRC has also expressed expectations for qualification testing, based in large part on Transnuclear's successful application to use a new composite material in the TN-68 storage / transport cask. The difficulty is that adding more boron than is really necessary to a metal has some negative effects on the material, reducing the ductility and the thermal conductivity, and increasing the cost. Excessive testing requirements can have the undesired effect of keeping superior materials out of spent fuel package designs, without a corresponding justification based on public safety. In European countries and especially in France, 100% credit has been accepted up to now with materials controls specified in the Safety Analysis Report (SAR): Manufacturing process approved by qualification testing Materials manufacturing controlled under a Quality Assurance system. During fabrication, acceptance testing directly on products or on representative samples. Acceptance criteria taking into account a statistical uncertainty corresponding to 3σ. The original and current bases for the reduced 10 B credit, the design requirements for neutron absorber materials, and the experience of Transnuclear and Cogema Logistics with neutron absorber testing are examined. Guidelines for qualification and acceptance testing and process controls

A proposal for an international program to develop dry recycle of spent nuclear fuel

International Nuclear Information System (INIS)

Feinroth, H.

1999-01-01

The dry oxidation-reduction process (called OREOX for Oxidation Reduction of Oxide Fuel) being developed by Korea and Canada, in cooperation with IAEA and the US State Department, is limited to recycle of spent LWR fuel into CANDU reactors (DUPIC). When first conceived and demonstrated via irradiation of test elements by Atomics International in 1965, (the process was called AIROX at that time) a wider range of applications was intended, including recycle of spent LWR fuel into LWRs. Studies sponsored by DOE's Idaho Office in 1992 confirmed the applicability of this technology to regions containing LWR's only, and described the potential advantages of such recycle from an environmental, waste management and economic point of view, as compared to the direct disposal option. Recent analyses conducted by the author indicates that such dry recycle may be one of the few acceptable paths remaining for resolution of the US spent fuel storage dilemma that remains consistent with US non-proliferation policy. It is proposed that a new US program be established to develop AIROX dry recycle for use in the US, and this become part of an international cooperative program, including the current Canadian - Korean program, and possibly including participation of other countries wishing to pursue alternatives to the once through cycle, and wet reprocessing. With shared funding of major project elements, such international cooperation would accelerate the demonstration and commercial deployment of dry recycle technology, as compared to separate and independent programs in each country. (author)

Evaluation of potential for MSRE spent fuel and flush salt storage and treatment at the INEL

International Nuclear Information System (INIS)

Ougouag, A.M.; Ostby, P.A.; Nebeker, R.L.

1996-09-01

The potential for interim storage as well as for treatment of the Molten Salt Reactor Experiment spent fuel at INEL has been evaluated. Provided that some minimal packaging and chemical stabilization prerequisites are satisfied, safe interim storage of the spent fuel at the INEL can be achieved in a number of existing or planned facilities. Treatment by calcination in the New Waste Calcining Facility at the INEL can also be a safe, effective, and economical alternative to treatment that would require the construction of a dedicated facility. If storage at the INEL is chosen for the Molten Salt Reactor Experiment (MSRE) spent fuel salts, their transformation to the more stable calcine solid would still be desirable as it would result in a lowering of risks. Treatment in the proposed INEL Remote-Handled Immobilization Facility (RHIF) would result in a waste form that would probably be acceptable for disposal at one of the proposed national repositories. The cost increment imputable to the treatment of the MSRE salts would be a small fraction of the overall capital and operating costs of the facility or the cost of building and operating a dedicated facility. Institutional and legal issues regarding shipments of fuel and waste to the INEL are summarized. The transfer of MSRE spent fuel for interim storage or treatment at the INEL is allowed under existing agreements between the State of idaho and the Department of energy and other agencies of the Federal Government. In contrast, current agreements preclude the transfer into Idaho of any radioactive wastes for storage or disposal within the State of Idaho. This implies that wastes and residues produced from treating the MSRE spent fuel at locations outside Idaho would not be acceptable for storage in Idaho. Present agreements require that all fuel and high-level wastes stored at the INEL, including MSRE spent fuel if received at the INEL, must be moved to a location outside Idaho by the year 2035

Control system design specification of advanced spent fuel management process units

Energy Technology Data Exchange (ETDEWEB)

Ahn, S. H.; Kim, S. H.; Yoon, J. S

2003-06-01

In this study, the design specifications of instrumentation and control system for advanced spent fuel management process units are presented. The advanced spent fuel management process consists of several process units such as slitting device, dry pulverizing/mixing device, metallizer, etc. In this study, the control and operation characteristics of the advanced spent fuel management mockup process devices and the process devices developed in 2001 and 2002 are analysed. Also, a integral processing system of the unit process control signals is proposed, which the operation efficiency is improved. And a redundant PLC control system is constructed which the reliability is improved. A control scheme is proposed for the time delayed systems compensating the control performance degradation caused by time delay. The control system design specification is presented for the advanced spent fuel management process units. This design specifications can be effectively used for the detail design of the advanced spent fuel management process.

Partial Defect Verification of Spent Fuel Assemblies by PDET: Principle and Field Testing in Interim Spent Fuel Storage Facility (CLAB) in Sweden

Energy Technology Data Exchange (ETDEWEB)

Ham, Y.S.; Kerr, P.; Sitaraman, S.; Swan, R. [Global Security Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); Rossa, R. [SCK-CEN, Mol (Belgium); Liljenfeldt, H. [SKB in Oskarshamn (Sweden)

2015-07-01

The need for the development of a credible method and instrument for partial defect verification of spent fuel has been emphasized over a few decades in the safeguards communities as the diverted spent fuel pins can be the source of nuclear terrorism or devices. The need is increasingly more important and even urgent as many countries have started to transfer spent fuel to so called 'difficult-to-access' areas such as dry storage casks, reprocessing or geological repositories. Partial defect verification is required by IAEA before spent fuel is placed into 'difficult-to-access' areas. Earlier, Lawrence Livermore National Laboratory (LLNL) has reported the successful development of a new, credible partial defect verification method for pressurized water reactor (PWR) spent fuel assemblies without use of operator data, and further reported the validation experiments using commercial spent fuel assemblies with some missing fuel pins. The method was found to be robust as the method is relatively invariant to the characteristic variations of spent fuel assemblies such as initial fuel enrichment, cooling time, and burn-up. Since then, the PDET system has been designed and prototyped for 17x17 PWR spent fuel assemblies, complete with data acquisition software and acquisition electronics. In this paper, a summary description of the PDET development followed by results of the first successful field testing using the integrated PDET system and actual spent fuel assemblies performed in a commercial spent fuel storage site, known as Central Interim Spent fuel Storage Facility (CLAB) in Sweden will be presented. In addition to partial defect detection initial studies have determined that the tool can be used to verify the operator declared average burnup of the assembly as well as intra-assembly burnup levels. (authors)

Feasibility of safe terminal disposal of spent nuclear fuel

International Nuclear Information System (INIS)

Nilsson, B.; Papp, T.

1980-01-01

The results of the KBS study indicate that safe terminal storage of spent nuclear fuel in crystalline rock is feasible with the technology available today and at a safety level that is well within the limitations recommended by the ICRP. This statement is not only based on the fact that the doses calculated in the KBS study were acceptably low, but even more on the freedom to choose the dimensions of the engineered barriers as well as depth of the repository and to some degree the quality of the host rock

Thermal hydraulic feasibility assessment of the spent nuclear fuel project

International Nuclear Information System (INIS)

Heard, F.J.

1996-01-01

A series of analyses have been completed investigating the thermal-hydraulic performance and feasibility of the Spent Nuclear Fuel Project (SNFP) Integrated Process Strategy (IPS). The goal was to develop a series of thermal-hydraulic models that could respond to all process and safety related issues that may arise pertaining to the SNFP, as well as provide a basis for validation of the results. Results show that there is a reasonable envelope for process conditions and requirements that are thermally and hydraulically acceptable

Standard review plan for reviewing safety analysis reports for dry metallic spent fuel storage casks

International Nuclear Information System (INIS)

1988-01-01

The Cask Standard Review Plan (CSRP) has been prepared as guidance to be used in the review of Cask Safety Analysis Reports (CSARs) for storage packages. The principal purpose of the CSRP is to assure the quality and uniformity of storage cask reviews and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. The CSRP also sets forth solutions and approaches determined to be acceptable in the past by the NRC staff in dealing with a specific safety issue or safety-related design area. These solutions and approaches are presented in this form so that reviewers can take consistent and well-understood positions as the same safety issues arise in future cases. An applicant submitting a CSAR does not have to follow the solutions or approaches presented in the CSRP. However, applicants should recognize that the NRC staff has spent substantial time and effort in reviewing and developing their positions for the issues. A corresponding amount of time and effort will probably be required to review and accept new or different solutions and approaches

Spent nuclear fuel transportation: public issues and answers

International Nuclear Information System (INIS)

Hoffman, W.D.

1986-01-01

The court-ordered shipping of 750 spent nuclear fuel assemblies from West Valley, New York back to their utility owners has generated considerable public and media interest. This paper discusses the specific concerns of the general public over the West Valley shipments, the issues raised by opposition groups, the interest of public officials and emergency preparedness teams as well as the media coverage generated. An analysis is performed on the effectiveness of the West Valley and utility public information programs utilized in addressing these issues, concerns and interests. Emphasis is placed on communications which work to facilitate the shipments and generate fuel transport acceptance. Information programs are discussed which increase preparedness for nuclear shipments by emergency response teams and build public confidence in their safety. The paper also examines communications which could have further enhanced the shipping campaign to date. Finally, plans are discussed for media preparation with interview training and press conferences. Emphasis is placed on materials provided for the media which have served to generate more favorable print and air time

Spent nuclear fuel transportation: Public issues and answers

International Nuclear Information System (INIS)

Hoffman, W.D.

1986-01-01

The court-ordered shipping of 750 spent nuclear fuel assemblies from West Valley, New York back to their utility owners has generated considerable public and media interest. This paper discusses the specific concerns of the general public over the West Valley shipments, the issues raised by opposition groups, the interests of public officials and emergency preparedness teams as well as the media coverage generated. An analysis is performed on the effectiveness of the West Valley and utility public information programs utilized in addressing these issues, concerns and interests. Emphasis is placed on communications which work to facilitate the shipments and generate fuel transport acceptance. Information programs are discussed which increase preparedness for nuclear shipments by emergency response teams and build public confidence in their safety. The paper also examines communications which could have further enhanced the shipping campaigns to date. Finally, plans are discussed for media preparation with interview training and press conferences. Emphasis is placed on materials provided for the media which has served to generate more favorable print and air time

Associations between Parental and Friend Social Support and Children’s Physical Activity and Time Spent outside Playing

OpenAIRE

Constantinos A. Loucaides; Niki Tsangaridou

2017-01-01

The purpose of this study was to examine the structural validity of a parent and a child questionnaire that assessed parental and friends' influences on children's physical activity and investigate the associations between the derived factors, physical activity, and time spent outside. Children (N = 154, mean age = 11.7) and 144 of their parents completed questionnaires assessing parental and friends' influences on children's physical activity. Children wore a pedometer for six days. Explorat...

Guidebook on spent fuel storage

International Nuclear Information System (INIS)

1984-01-01

The Guidebook summarizes the experience and information in various areas related to spent fuel storage: technological aspects, the transport of spent fuel, economical, regulatory and institutional aspects, international safeguards, evaluation criteria for the selection of a specific spent fuel storage concept, international cooperation on spent fuel storage. The last part of the Guidebook presents specific problems on the spent fuel storage in the United Kingdom, Sweden, USSR, USA, Federal Republic of Germany and Switzerland

The preliminary design and feasibility study of the spent fuel and high level waste repository in the Czech Republic

International Nuclear Information System (INIS)

Valvoda, Z.; Holub, J.; Kucerka, M.

1996-01-01

In the year 1993, began the Program of Development of the Spent Fuel and High Level Waste Repository in the Conditions of the Czech Republic. During the first phase, the basic concept and structure of the Program has been developed, and the basic design criteria and requirements were prepared. In the conditions of the Czech Republic, only an underground repository in deep geological formation is acceptable. Expected depth is between 500 to 1000 meters and as host rock will be granites. A preliminary variant design study was realized in 1994, that analyzed the radioactive waste and spent fuel flow from NPPs to the repository, various possibilities of transportation in accordance to the various concepts of spent fuel conditioning and transportation to the underground structures. Conditioning and encapsulation of spent fuel and/or radioactive waste is proposed on the repository site. Underground disposal structures are proposed at one underground floor. The repository will have reserve capacity for radioactive waste from NPPs decommissioning and for waste non acceptable to other repositories. Vertical disposal of unshielded canisters in boreholes and/or horizontal disposal of shielded canisters is studied. As the base term of the start up of the repository operation, the year 2035 has been established. From this date, a preliminary time schedule of the Project has been developed. A method of calculating leveled and discounted costs within the repository lifetime, for each of selected 5 variants, was used for economic calculations. Preliminary expected parametric costs of the repository are about 0,1 Kc ($0.004) per MWh, produced in the Czech NPPs. In 1995, the design and feasibility study has gone in more details to the technical concept of repository construction and proposed technologies, as well as to the operational phase of the repository. Paper will describe results of the 1995 design work and will present the program of the repository development in next period

Application of spent fuel treatment technology to plutonium immobilization

International Nuclear Information System (INIS)

McPheeters, C.C.; Ackerman, J.P.; Gay, E.C., Johnson, G.K.

1996-01-01

The purpose of the electrometallurgical treatment technology being developed at Argonne National Laboratory (ANL) is to convert certain spent nuclear fuels into waste forms that are suitable for disposal in a geological repository for nuclear waste. The spent fuels of interest are those that cannot be safely stored for a long time in their current condition, and those that cannot be qualified for repository disposal. This paper explores the possibility of applying this electrometallurgical treatment technology to immobilization of surplus fissile materials, primarily plutonium. Immobilization of surplus fissile materials by electrometallurgical treatment could be done in the same facilities, at the same time. and in the same equipment as the proposed treatment of the present inventory of spent nuclear fuel. The cost and schedule savings of this simultaneous treatment scheme would be significant

76 FR 47529 - Customer Clearing Documentation and Timing of Acceptance for Clearing; Correction

Science.gov (United States)

2011-08-05

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Parts 1, 23, and 39 RIN 3038-AD51 Customer Clearing Documentation and Timing of Acceptance for Clearing; Correction AGENCY: Commodity Futures Trading Commission... published in the Federal Register of August 1, 2011, regarding Customer Clearing Documentation and Timing of...

Spent nuclear fuel storage

International Nuclear Information System (INIS)

Romanato, Luiz Sergio

2005-01-01

When a country becomes self-sufficient in part of the nuclear cycle, as production of fuel that will be used in nuclear power plants for energy generation, it is necessary to pay attention for the best method of storing the spent fuel. Temporary storage of spent nuclear fuel is a necessary practice and is applied nowadays all over the world, so much in countries that have not been defined their plan for a definitive repository, as well for those that already put in practice such storage form. There are two main aspects that involve the spent fuels: one regarding the spent nuclear fuel storage intended to reprocessing and the other in which the spent fuel will be sent for final deposition when the definitive place is defined, correctly located, appropriately characterized as to several technical aspects, and licentiate. This last aspect can involve decades of studies because of the technical and normative definitions at a given country. In Brazil, the interest is linked with the storage of spent fuels that will not be reprocessed. This work analyses possible types of storage, the international panorama and a proposal for future construction of a spent nuclear fuel temporary storage place in the country. (author)

A safety study on the wet storage of spent fuel

International Nuclear Information System (INIS)

Chun, Kwan Sik; Whang, Joo Ho; Lee, Hoo Kun; Choi, Jong Won; Lee, Jong Geun

1989-02-01

This study is to provide data related with a basic design of the spent fuel storage facility in the field of radiation and to establish the safety assessment methodology of away from reactor spent fuel storage facility. This is in progress and continue upto the year of 1991. The mathematical model which predict the quantity of environmental release of fission and corrosion products from spent fuel received and stored in wet storage facility operated in normal conditions was prepared. The decay characteristic of domestic spent fuels are analysed and then the coefficients for the prediction of the decay heat by simple formular was determined. This correlations could predict decay heat of spent fuel with ±10% difference from ORIGEN2 results. The release factor of cobalt out of PWR spent fuel in PIE pool is 7.97 x 10-12∼8.49 x 10-11 Ci/ sec-rod, which appears to be linear without being connected with the types of fuel defects, but that of cesium varies with the defect type and the exposure time in water. In water condition, release factor of uranium out of CANDU fuel pellets appears to be about 5 x 10-8/day, whose tendency is similar to that of cesium of the latter half of the exposure time of water. (Author)

Simulating thermal behavior of AECL's spent fuel dry storage system with CATHENA

Energy Technology Data Exchange (ETDEWEB)

Sabourin, G. [Atomic Energy of Canada Limited, Montreal, PQ (Canada)

1998-07-01

This paper documents the comparisons between CATHENA predictions and temperature measurements taken at the Gentilly-2 NPP spent fuel dry storage facility and in a mock--up of a storage basket placed inside a storage cylinder. It also presents CATHENA temperature predictions related to the storage of spent fuel in MACSTOR modules as planned for Ignalina NPP, Lithuania. CATHENA has been chosen because it can simulate many noncondensable gases including air and helium, and because of its great flexibility in the representation of the MACSTOR module geometry. The results of the simulations show good agreement with the experimental measurements. The two comparisons indicate that CATHENA can be used to simulate heat transfer from the fuel to the external air circuit of the spent fuel dry storage system. For the Ignalina MACSTOR module, containing RBMK fuel having higher heat release than typical CANDU fuel, CATHENA predicts that the maximum fuel temperature is expected to be around 240 deg C, giving an acceptable margin below the maximum allowed temperature of 300 deg C. In conclusion, this paper shows that the thermalhydraulic code CATHENA can accurately predict the thermal behavior AECL's air cooled spent fuel dry storage system. (author)

Status of spent fuel shipping cask development

International Nuclear Information System (INIS)

Hall, I.K.; Hinschberger, S.T.

1989-01-01

This paper discusses how several new-generation shopping cask systems are being developed for safe and economical transport of commercial spent nuclear fuel and other radioactive wastes for the generating sites to a federal geologic repository or monitored retrievable storage (MRS) facility. Primary objectives of the from-reactor spent fuel cask development work are: to increase cask payloads by taking advantage of the increased at-reactor storage time under the current spent fuel management scenario, to facilitate more efficient cask handling operations with reduced occupational radiation exposure, and to promote standardization of the physical interfaces between casks and the shipping and receiving facilities. Increased cask payloads will significantly reduce the numbers of shipments, with corresponding reductions in transportation costs and risks to transportation workers, cask handling personnel, and the general public

Long time storage containers for spent fuels and vitrified wastes: synthesis of the studies

International Nuclear Information System (INIS)

Beziat, A.

2004-01-01

This report presents a synthesis of the studies relatives to the containers devoted to the long time spent fuels storage and vitrified wastes packages. These studies were realized in the framework of the axis 3 of the law of 1991 on the radioactive wastes management. The first part is devoted to the presentation of the studies. The container sizing studies which constitute the first containment barrier are then presented. The material choice and the closed system are also detailed. The studies were validate by the realization of containers models and an associated demonstration program is proposed. A synthesis of the technical and economical studies allowed to determine the components and operation costs. (A.L.B.)

Long Term Management of Spent Fuel from NEK

International Nuclear Information System (INIS)

Kegel, L.; Zeleznik, N.; Lokner, V.

2012-01-01

In 2008 Slovenian national agency for radioactive waste management ARAO started together with Croatian sister organization APO elaboration of a new revision of Decommissioning, Radioactive waste and Spent fuel management program for NPP Krsko. In scope of this work also new studies for spent fuel storage and disposal were prepared in which technical solutions were analyzed and proposed for specific spent fuel (SF) from NPP Krsko. Time schedules for main activities of SF disposal development were elaborated for two alternative scenarios which correspond to normal NPP Krsko operation and 20 - year lifetime extension. All technical activities were financially assessed and costs estimates of SF storage and geological disposal development provided. The prepared studies were verified by international experts in order to confirm the correctness of technical inputs, proposed solutions, time schedules of activities and costs evaluations. The calculated nominal and discounted costs of spent fuel management served for the recalculation of annuities in the integral scenarios of interrelated activities on NPP Krsko decommissioning, LILW and SF management. Besides new first proposal of long-term management of spent fuel from NPP Krsko the joint work also opened additional questions. One of this is time schedule of proposed activities for long term SF management - what were the criteria used in the determination of actions and are they optimal for both countries. How the process of site selection for SF storage or disposal should be prepared having in mind that it will bring many questions in both countries? Is direct disposal of SF still the best solution in current development of nuclear prospects? The paper will present the current development and solutions for SF management from NPP Krsko and will try to answer questions which need to be solved and future development in the SF management.(author).

An economic analysis of spent fuel management and storage

International Nuclear Information System (INIS)

Nagano, Koji

1998-01-01

Spent fuel management is becoming a key issue not only in the countries that have already experienced years of nuclear operation but also in the Asian countries that started nuclear utilization rather lately. This paper summarizes the key aspects that essentially determine optimal conditions for desired spent fuel management strategies from the engineering-economic point of view, in both national and regional perspectives. The term 'desired' is intended to highlight positive and beneficial aspects of such strategies, namely mobile and timely exploitation of spent fuel storage. Among all, the economy of scale, the economy of scope, the learning-by-doing effect, and benefits of R and D are reviewed theoretically and empirically, and the paper overviews to what extent these factors are implemented in solving spent fuel management strategy optimization problem. (author)

Evaluation of the Compressive Strength of Cement-Spent Resins Matrix Mixed with Bio char

International Nuclear Information System (INIS)

Zalina Laili; Muhamad Samudi Yasir; Zalina Laili; Mohd Abdul Wahab; Nur Azna Mahmud; Nurfazlina Zainal Abidin

2015-01-01

The evaluation of compressive strength of cement-spent resins matrix mixed with bio char was investigated. In this study, bio char with different percentage (5 %, 8 %, 11 % 14 % and 18 %) was used as alternative admixture material for cement solidification of spent resins. Some properties of the physical and chemical of spent resins and bio char were also investigated. The performance of cemented spent resins with the addition of bio char was evaluated based on their compressive strength and the water resistance test. The compressive strength was evaluated at three different curing periods of 7, 14 and 28 days, while 4 weeks of immersion in distilled water was chosen for water resistance test. The result indicated that the compressive strength at 7, 14 and 28 days of curing periods were above the minimum criterion for example > 3.45 MPa of acceptable level for cemented waste form. Statistical analysis showed that there was no significant relationship between the compressive strength of the specimen and the percentage of bio char content. Result from the water resistance test showed that only one specimen that contained of 5 % of bio char failed the water resistance test due to the high of spent resins/ bio char ratio. The compressive strength of cement solidified spent resins was found increased after the water resistance test indicating further hydration occurred after immersed in water. The results of this study also suggest that the specimen with 8 %, 11 %, 14 % and 18 % of bio char content were resistance in water and suitable for the leaching study of radionuclides from cement-bio char-spent resins matrix. (author)

Current status of the first interim spent fuel storage facility in Japan

International Nuclear Information System (INIS)

Shinbo, Hitoshi; Kondo, Mitsuru

2008-01-01

In Japan, storage of spent fuels outside nuclear power plants was enabled as a result of partial amendments to the Nuclear Reactor Regulation Law in June 2000. Five months later, Mutsu City in Aomori Prefecture asked the Tokyo Electric Power Company (TEPCO) to conduct technical surveys on siting of the interim spent fuel storage facility (we call it 'Recyclable-Fuel Storage Center'). In April 2003, TEPCO submitted the report on siting feasibility examination, concluded that no improper engineering data for siting, construction of the facility will be possible from engineering viewpoint. Siting Activities for publicity and public acceptance have been continued since then. After these activities, Aomori Prefecture and Mutsu City approved siting of the Recyclable Fuel Storage Center in October 2005. Aomori Prefecture, Mutsu City, TEPCO and Japan Atomic Power Company (JAPC) signed an agreement on the interim spent fuel storage Facility. A month later, TEPCO and JAPC established Recyclable-Fuel Storage Company (RFS) in Mutsu City through joint capital investment, specialized in the first interim spent fuel storage Facility in Japan. In May 2007, we made an application for establishment permit, following safety review by regulatory authorities. In March 2008, we started the preparatory construction. RFS will safely store of spent fuels of TEPCO and JAPC until they will be reprocessed. Final storage capacity will be 5,000 ton-U. First we will construct the storage building of 3,000 ton-U to be followed by second building. We aim to start operation by 2010. (author)

Sorption of lead from aqueous solutions by spent tea leaf | Yoshita ...

African Journals Online (AJOL)

Pb) from solution. The Pb removal by the spent tea leaf adsorbent depended on pretreatment of spent tea leaf, adsorption contact time and adsorbent dosage. The optimum pretreatment conditions were confirmed to be that tea leaf was ground ...

Spent fuel storage facility, Kalpakkam

International Nuclear Information System (INIS)

Shreekumar, B.; Anthony, S.

2017-01-01

Spent Fuel Storage Facility (SFSF), Kalpakkam is designed to store spent fuel arising from PHWRs. Spent fuel is transported in AERB qualified/authorized shipping cask by NPCIL to SFSF by road or rail route. The spent fuel storage facility at Kalpakkam was hot commissioned in December 2006. All systems, structures and components (SSCs) related to safety are designed to meet the operational requirements

Spent fuel storage and isolation

International Nuclear Information System (INIS)

Bensky, M.S.; Kurzeka, W.J.; Bauer, A.A.; Carr, J.A.; Matthews, S.C.

1979-02-01

The principal spent fuel activities conducted within the commercial waste and spent fuel within the Commercial Waste and Spent Fuel Packaging Program are: simulated near-surface (drywell) storage demonstrations at Hanford and the Nevada Test Site; surface (sealed storage cask) and drywell demonstrations at the Nevada Test Site; and spent fuel receiving and packaging facility conceptual design. These investigations are described

Corrosion of Spent Nuclear Fuel: The Long-Term Assessment

Energy Technology Data Exchange (ETDEWEB)

Ewing, Rodney C.

2003-09-14

The successful disposal of spent nuclear fuel (SNF) is one of the most serious challenges to the successful completion of the nuclear fuel cycle and the future of nuclear power generation. In the United States, 21 percent of the electricity is generated by 107 commercial nuclear power plants (NPP), each of which generates 20 metric tons of spent nuclear fuel annually. In 1996, the total accumulation of spent nuclear fuel was 33,700 metric tons of heavy metal (MTHM) stored at 70 sites around the country. The end-of-life projection for current nuclear power plants (NPP) is approximately 86,000 MTHM. In the proposed nuclear waste repository at Yucca Mountain over 95% of the radioactivity originates from spent nuclear fuel. World-wide in 1998, approximately 130,000 MTHM of SNF have accumulated, most of it located at 236 NPP in 36 countries. Annual production of SNF is approximately 10,000 MTHM, containing about 100 tons of ''reactor grade'' plutonium. Any reasonable increase in the proportion of energy production by NPP, i.e., as a substitute for hydrocarbon-based sources of energy, will significantly increase spent nuclear fuel production. Spent nuclear fuel is essentially UO{sub 2} with approximately 4-5 atomic percent actinides and fission product elements. A number of these elements have long half-lives hence, the long-term behavior of the UO{sub 2} is an essential concern in the evaluation of the safety and risk of a repository for spent nuclear fuel. One of the unique and scientifically most difficult aspects of the successful disposal of spent nuclear fuel is the extrapolation of short-term laboratory data (hours to years) to the long time periods (10{sup 3} to 10{sup 5} years) as required by the performance objectives set in regulations, i.e. 10 CFR 60. The direct verification of these extrapolations or interpolations is not possible, but methods must be developed to demonstrate compliance with government regulations and to satisfy the

iBEST: a program for burnup history estimation of spent fuels based on ORIGEN-S

International Nuclear Information System (INIS)

Kim, Do Yeon; Hong, Ser Gi; Ahn, Gil Hoon

2015-01-01

In this paper, we describe a computer program, iBEST (inverse Burnup ESTimator), that we developed to accurately estimate the burnup histories of spent nuclear fuels based on sample measurement data. The burnup history parameters include initial uranium enrichment, burnup, cooling time after discharge from reactor, and reactor type. The program uses algebraic equations derived using the simplified burnup chains of major actinides for initial estimations of burnup and uranium enrichment, and it uses the ORIGEN-S code to correct its initial estimations for improved accuracy. In addition, we newly developed a stable bisection method coupled with ORIGEN-S to correct burnup and enrichment values and implemented it in iBEST in order to fully take advantage of the new capabilities of ORIGEN-S for improving accuracy. The iBEST program was tested using several problems for verification and well-known realistic problems with measurement data from spent fuel samples from the Mihama-3 reactor for validation. The test results show that iBEST accurately estimates the burnup history parameters for the test problems and gives an acceptable level of accuracy for the realistic Mihama-3 problems

Multinational approaches relevant to spent fuel management

International Nuclear Information System (INIS)

Pellaud, B.

2007-01-01

The storage of spent fuel is a suitable candidate for a multilateral approach, primarily at the regional level. Small countries with only a few nuclear power plants would benefit economically from large joint facilities. The storage of special nuclear materials in a few safe and secure facilities would also enhance safeguards and physical protection. However, the final disposal of spent fuel and high level radioactive waste is the best candidate for a multilateral approach. It would offer major economic benefits and substantial non-proliferation benefits in spite of the legal, political and public acceptance challenges to be expected in most countries. The transfer of nuclear waste from the exporting country to the host country of an interim storage facility or of a final repository would be done under bilateral or multilateral agreements at the commercial and governmental levels, in accordance with the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. Bilateral or international oversight of joint facilities should be arranged, as needed, to achieve the confidence of the partners as to the safety and physical security of the proposed facility. Such monitoring should cover the adequacy of the technical design, its safety features, its environmental impact, the physical security of nuclear materials and possibly the financial management of the joint venture. After the initial choice of bilateral arrangements, some kind of international monitoring may become appropriate. Various organizations could fulfil such a function, in particular, the IAEA. Such monitoring would have nothing to do with nuclear safeguards; repository monitoring would be a parallel but independent activity of the IAEA. (author)

Handling of TRIGA spent fuel at the Medical University of Hanover and its return to the United States

International Nuclear Information System (INIS)

Hampel, Gabriele; Harke, Heinrich; Kelm, Wieland; Klaus, Uwe

2008-01-01

The Medical University of Hannover (MHH) was taking part in the US Department of Energy's (DOE) 'Research Reactor Spent Fuel Acceptance Program' to return its 76 spent TRIGA fuel elements to the United States in the middle of 1999. The fuel elements have been moved to the Idaho National Engineering and Environmental Laboratory (INEEL) in Idaho. This paper describes the technical facilities for handling the fuel elements at the MHH and the various steps in removing the fuel elements from the reactor, transferring them to the transport cask and shipping them to the INEEL. (authors)

Behaviour of spent fuel assemblies during extended storage

International Nuclear Information System (INIS)

1987-04-01

This report is the final report of the IAEA Co-ordinated Research Programme on Behaviour of Spent Fuel Assemblies During Extended Storage (BEFAST, Phase I, 1981-86). It contains the results on wet and dry spent fuel storage technologies obtained from 11 institutes (10 countries: Austria, Canada, Czechoslovakia, Finland, German Democratic Republic, Hungary, Japan, Sweden, USA and USSR) participating in the BEFAST CRP during the time period 1981-86. Names of participating institutes and chief investigators are given. The interim spent fuel storage has been recognized as an important independent step in the nuclear fuel cycle. Due to the delay in commercial reprocessing of spent fuel in some cases it should be stored up to 30-50 years or more before reprocessing or final disposal. This programme was evaluated by all its participants and observers as very important and helpful for the nuclear community and it was decided to continue it further (1986-91) as BEFAST, Phase II

The velocity dependent dissolution of spent nuclear fuel in a geologic repository

International Nuclear Information System (INIS)

Nutt, W.M.

1990-02-01

A model describing the dissolution of fission products and transuranic isotopes from spent nuclear fuel into flowing ground water has been developed. This model is divided into two parts. The first part of the model calculates the temperature within a consolidated spent fuel waste form at a given time and ground water velocity. This model was used to investigate whether water flowing at rates representative of a geological repository located at Yucca Mountain, Nevada, will cool a wasteform consisting of consolidated spent nuclear fuel pins. Time and velocity dependent temperature profiles were generated. These profiles were input into the second model, which calculates the dissolution rate of waste isotopes from a spent fuel pin. Two dissolution limiting processes were modeled; the processes are dissolution limited by the solubility limit of an isotopes in the ground water, and dissolution limited by the diffusion of waste isotopes from the interior of a spent fuel pin to the surface where dissolution can occur

Decay heat power of spent nuclear fuel of power reactors with high burnup at long-term storage

Directory of Open Access Journals (Sweden)

Ternovykh Mikhail

2017-01-01

Full Text Available Decay heat power of actinides and fission products from spent nuclear fuel of power VVER-1000 type reactors at long-term storage is calculated. Two modes of storage are considered: mode in which single portion of actinides or fission products is loaded in storage facility, and mode in which actinides or fission products from spent fuel of one VVER reactor are added every year in storage facility during 30 years and then accumulated nuclides are stored without addition new nuclides. Two values of fuel burnup 40 and 70 MW·d/kg are considered for the mode of storage of single fuel unloading. For the mode of accumulation of spent fuel with subsequent storage, one value of burnup of 70 MW·d/kg is considered. Very long time of storage 105 years accepted in calculations allows to simulate final geological disposal of radioactive wastes. Heat power of fission products decreases quickly after 50-100 years of storage. The power of actinides decreases very slow. In passing from 40 to 70 MW·d/kg, power of actinides increases due to accumulation of higher fraction of 244Cm. These data are important in the back end of fuel cycle when improved cooling system of the storage facility will be required along with stronger radiation protection during storage, transportation and processing.

Decay heat power of spent nuclear fuel of power reactors with high burnup at long-term storage

Science.gov (United States)

Ternovykh, Mikhail; Tikhomirov, Georgy; Saldikov, Ivan; Gerasimov, Alexander

2017-09-01

Decay heat power of actinides and fission products from spent nuclear fuel of power VVER-1000 type reactors at long-term storage is calculated. Two modes of storage are considered: mode in which single portion of actinides or fission products is loaded in storage facility, and mode in which actinides or fission products from spent fuel of one VVER reactor are added every year in storage facility during 30 years and then accumulated nuclides are stored without addition new nuclides. Two values of fuel burnup 40 and 70 MW·d/kg are considered for the mode of storage of single fuel unloading. For the mode of accumulation of spent fuel with subsequent storage, one value of burnup of 70 MW·d/kg is considered. Very long time of storage 105 years accepted in calculations allows to simulate final geological disposal of radioactive wastes. Heat power of fission products decreases quickly after 50-100 years of storage. The power of actinides decreases very slow. In passing from 40 to 70 MW·d/kg, power of actinides increases due to accumulation of higher fraction of 244Cm. These data are important in the back end of fuel cycle when improved cooling system of the storage facility will be required along with stronger radiation protection during storage, transportation and processing.

Spent fuel transportation in the United States: commercial spent fuel shipments through December 1984

International Nuclear Information System (INIS)

1986-04-01

This report has been prepared to provide updated transportation information on light water reactor (LWR) spent fuel in the United States. Historical data are presented on the quantities of spent fuel shipped from individual reactors on an annual basis and their shipping destinations. Specifically, a tabulation is provided for each present-fuel shipment that lists utility and plant of origin, destination and number of spent-fuel assemblies shipped. For all annual shipping campaigns between 1980 and 1984, the actual numbers of spent-fuel shipments are defined. The shipments are tabulated by year, and the mode of shipment and the casks utilized in shipment are included. The data consist of the current spent-fuel inventories at each of the operating reactors as of December 31, 1984. This report presents historical data on all commercial spent-fuel transportation shipments have occurred in the United States through December 31, 1984

Maternal Time Use and Nurturing: Analysis of the Association Between Breastfeeding Practice and Time Spent Interacting with Baby.

Science.gov (United States)

Smith, Julie P; Forrester, Robert

2017-06-01

Breastfeeding supports child development through complex mechanisms that are not well understood. Numerous studies have compared how well breastfeeding and nonbreastfeeding mothers interact with their child, but few examine how much interaction occurs. Our study of weekly time use among 156 mothers of infants aged 3-9 months investigated whether lactating mothers spend more time providing emotional support or cognitive stimulation of their infants than nonbreastfeeding mothers, and whether the amount of such interactive time is associated with breastfeeding intensity. Mothers were recruited via mother's and baby groups, infant health clinics, and childcare services, and used an electronic device to record their 24-hour time use for 7 days. Sociodemographic and feeding status data were collected by questionnaire. Statistical analysis using linear mixed modeling and residual maximum likelihood analysis compared maternal time use for those giving "some breastfeeding" and those "not breastfeeding." Analysis was also conducted for more detailed feeding subgroups. Breastfeeding and nonbreastfeeding mothers had broadly similar socioeconomic and demographic characteristics. Breastfeeding was found to be associated with more mother-child interaction time, a difference only partially explained by weekly maternal employment hours or other interactive care activities such as play or reading. This study presents data suggesting that lactating mothers spent significantly more hours weekly on milk feeding and on carrying, holding, or soothing their infant than nonlactating mothers; and on providing childcare. Understanding the mechanisms by which child mental health and development benefits from breastfeeding may have important implications for policies and intervention strategies, and could be usefully informed by suitably designed time use studies.

Estimated risk contribution for dry spent fuel storage cask

International Nuclear Information System (INIS)

Santos, C.; Kirk, M.T.; Abramson, L.; Guttmann, J.; Hackett, E.; Simonen, F.A.

2001-01-01

The U.S. Nuclear Regulatory Commission (NRC) is pursuing means to risk-inform its regulations and programs for dry storage of spent nuclear fuel. In pursuit of this objective, the NRC will develop safety goals and probabilistic risk assessments for implementing risk-informed programs. This paper provides one example method for calculating the risk of a dry spent fuel storage cask under normal and accident conditions. The example is on the HI-STORM 100 cask at a proposed site containing four thousand such casks. The paper evaluates the risk to the public by determining the likelihood a welded stainless steel container will leak. In addition, the study addresses the risk at a site where 4,000 casks may be stored until the U.S. Department of Energy accepts the casks for placement in a repository. The methods used employ the PRODIGAL computer code to assess the probability of a faulty weld on a stainless steel-welded canister. These analyses are only the initial stages of a comprehensive risk study that the NRC is performing in support of its regulatory initiatives. (author)

Significance of campaigned spent fuel shipments

International Nuclear Information System (INIS)

Doman, J.W.; Tehan, T.E.

1993-01-01

Operational experience associated with spent fuel or irradiated hardware shipments to or from the General Electric Morris Facility is presented. The following specific areas are addressed: Problems and difficulties associated with meeting security and safeguard requirements of 10 CFR Part 73; problems associated with routing via railroad; problems associated with scheduling and impact on affected parties when a shipment is delayed or cancelled; and impact on training when shipments spread over many years. The lessons learned from these experiences indicate that spent fuel shipments are best conducted in dedicated open-quotes campaignsclose quotes that concentrate as much consecutive shipping activity as possible into one continuous time frame

Capabilities for processing shipping casks at spent fuel storage facilities

International Nuclear Information System (INIS)

Baker, W.H.; Arnett, L.M.

1978-01-01

Spent fuel is received at a storage facility in heavily shielded casks transported either by rail or truck. The casks are inspected, cooled, emptied, decontaminated, and reshipped. The spent fuel is transferred to storage. The number of locations or space inside the building provided to perform each function in cask processing will determine the rate at which the facility can process shipping casks and transfer spent fuel to storage. Because of the high cost of construction of licensed spent fuel handling and storage facilities and the difficulty in retrofitting, it is desirable to correctly specify the space required. In this paper, the size of the cask handling facilities is specified as a function of rate at which spent fuel is received for storage. The minimum number of handling locations to achieve a given throughput of shipping casks has been determined by computer simulation of the process. The simulation program uses a Monte Carlo technique in which a large number of casks are received at a facility with a fixed number of handling locations in each process area. As a cask enters a handling location, the time to process the cask at that location is selected at random from the distribution of process time. Shipping cask handling times are based on experience at the General Electric Storage Facility, Morris, Illinois. Shipping cask capacity is based on the most recent survey available of the expected capability of reactors to handle existing rail or truck casks

Impact of axial burnup profile on criticality safety of ANPP spent fuel cask

International Nuclear Information System (INIS)

Bznuni, S.

2006-01-01

Criticality safety assessment for WWER-440 NUHOMS cask with spent nuclear fuel from Armenian NPP has been performed. The cask was designed in such way that the neutron multiplication factor k eff must be below 0,95 for all operational modes and accident conditions. Usually for criticality analysis, fresh fuel approach with the highest enrichment is taken as conservative assumption as it was done for ANPP. NRSC ANRA in order to improve future fuel storage efficiency initiated research with taking into account burn up credit in the criticality safety assessment. Axial burn up profile (end effect) has essential impact on criticality safety justification analysis. However this phenomenon was not taken into account in the Safety Analysis Report of NUHOMS spent fuel storage constructed on the site of ANPP. Although ANRA does not yet accept burn up credit approach for ANPP spent fuel storage, assessment of impact of axial burnup profile on criticality of spent fuel assemblies has important value for future activities of ANRA. This paper presents results of criticality calculations of spent fuel assemblies with axial burn up profile. Horizontal burn up profile isn't taken account since influence of the horizontal variation of the burn up is much less than the axial variation. The actinides and actinides + fission products approach are discussed. The calculations were carried out with STARBUCS module of SCALE 5.0 code package developed at Oak Ridge National laboratory. SCALE5.0 sequence CSAS26 (KENO-VI) was used for evaluation the k eff for 3-D problems. Obtained results showed that criticality of ANPP spent fuel cask is very sensitive to the end effect

Proposed nuclear weapons nonproliferation policy concerning foreign research reactor spent nuclear fuel. Summary

International Nuclear Information System (INIS)

1995-03-01

The United States Department of Energy and United States Department of State are jointly proposing to adopt a policy to manage spent nuclear fuel from foreign research reactors. Only spent nuclear fuel containing uranium enriched in the United States would be covered by the proposed policy. The purpose of the proposed policy is to promote U.S. nuclear weapons nonproliferation policy objectives, specifically by seeking to reduce highly-enriched uranium from civilian commerce. This is a summary of the Draft Environmental Impact Statement. Environmental effects and policy considerations of three Management Alternative approaches for implementation of the proposed policy are assessed. The three Management Alternatives analyzed are: (1) acceptance and management of the spent nuclear fuel by the Department of Energy in the United States, (2) management of the spent nuclear fuel at one or more foreign facilities (under conditions that satisfy United States nuclear weapons nonproliferation policy objectives), and (3) a combination of components of Management Alternatives 1 and 2 (Hybrid Alternative). A No Action Alternative is also analyzed. For each Management Alternative, there are a number of alternatives for its implementation. For Management Alternative 1, this document addresses the environmental effects of various implementation alternatives such as varied policy durations, management of various quantities of spent nuclear fuel, and differing financing arrangements. Environmental impacts at various potential ports of entry, along truck and rail transportation routes, at candidate management sites, and for alternate storage technologies are also examined. For Management Alternative 2, this document addresses two subalternatives: (1) assisting foreign nations with storage; and (2) assisting foreign nations with reprocessing of the spent nuclear fuel

Method of processing spent fuel cladding tubes

International Nuclear Information System (INIS)

Nakatsuka, Masafumi; Ouchi, Atsuhiro; Imahashi, Hiromichi.

1986-01-01

Purpose: To decrease the residual activity of spent fuel cladding tubes in a short period of time and enable safety storage with simple storage equipments. Constitution: Spent fuel cladding tubes made of zirconium alloys discharged from a nuclear fuel reprocessing step are exposed to a grain boundary embrittling atmosphere to cause grain boundary destruction. This causes grain boundary fractures to the zirconium crystal grains as the matrix of nuclear fuels and then precipitation products precipitated to the grain boundary fractures are removed. The zirconium constituting the nuclear fuel cladding tube and other ingredient elements contained in the precipitation products are separated in this removing step and they are separately stored respectively. As a result, zirconium constituting most part of the composition of the spent nuclear fuel cladding tubes can be stored safely at a low activity level. (Takahashi, M.)

Present status of JMTR spent fuel shipment

International Nuclear Information System (INIS)

Miyazawa, Masataka; Watanabe, Masao; Yokokawa, Makoto; Sato, Hiroshi; Ito, Haruhiko

2002-01-01

The Japan Atomic Energy Research Institute (JAERI) has been consistently making the enrichment reduction of reactor fuels in cooperation with RERTR Program and FRR SNF Acceptance Program both conducted along with the U.S. Nuclear Non-Proliferation Policy and JMTR, 50 MW test reactor in Oarai Research Establishment, has achieved core conversion, from its initial 93% enriched UAl alloy to 45% enriched uranium-aluminide fuel, and then to the current 19.8% enriched uranium-silicide fuel. In order to return all of JMTR spent fuels, to be discharged from the reactor by May 12, 2006, to the U.S.A. by May 12, 2009, JAERI is planning the transportation schedule based on one shipment per year. The sixth shipment of spent fuels to U.S. was carried out as scheduled this year, where the total number of fuels shipped amounts to 651 elements. All of the UAl alloy elements have so far been shipped and now shipments of 45% enriched uranium-aluminide type fuels are in progress. Thus far the JMTR SFs have been transported on schedule. From 2003 onward are scheduled more then 850 elements to be shipped. In this paper, we describe our activities on the transportation in general and the schedule for the SFs shipments. (author)

Spent fuel workshop'2002

Energy Technology Data Exchange (ETDEWEB)

Poinssot, Ch

2002-07-01

This document gathers the transparencies of the presentations given at the 2002 spent fuel workshop: Session 1 - Research Projects: Overview on the IN CAN PROCESSES European project (M. Cowper), Overview on the SPENT FUEL STABILITY European project (C. Poinssot), Overview on the French R and D project on spent fuel long term evolution, PRECCI (C. Poinssot); Session 2 - Spent Fuel Oxidation: Oxidation of uranium dioxide single crystals (F. Garrido), Experimental results on SF oxidation and new modeling approach (L. Desgranges), LWR spent fuel oxidation - effects of burn-up and humidity (B. Hanson), An approach to modeling CANDU fuel oxidation under dry storage conditions (P. Taylor); Session 3 - Spent Fuel Dissolution Experiments: Overview on high burnup spent fuel dissolution studies at FZK/INE (A. Loida), Results on the influence of hydrogen on spent fuel leaching (K. Spahiu), Leaching of spent UO{sub 2} fuel under inert and reducing conditions (Y. Albinsson), Fuel corrosion investigation by electrochemical techniques (D. Wegen), A reanalysis of LWR spent fuel flow through dissolution tests (B. Hanson), U-bearing secondary phases formed during fuel corrosion (R. Finch), The near-field chemical conditions and spent fuel leaching (D. Cui), The release of radionuclides from spent fuel in bentonite block (S.S. Kim), Trace actinide behavior in altered spent fuel (E. Buck, B. Hanson); Session 4 - Radiolysis Issues: The effect of radiolysis on UO{sub 2} dissolution determined from electrochemical experiments with {sup 238}Pu doped UO{sub 2} M. Stroess-Gascoyne (F. King, J.S. Betteridge, F. Garisto), doped UO{sub 2} studies (V. Rondinella), Preliminary results of static and dynamic dissolution tests with {alpha} doped UO{sub 2} in Boom clay conditions (K. Lemmens), Studies of the behavior of UO{sub 2} / water interfaces under He{sup 2+} beam (C. Corbel), Alpha and gamma radiolysis effects on UO{sub 2} alteration in water (C. Jegou), Behavior of Pu-doped pellets in brines

Spent fuel strategy for the BR2 reactor

International Nuclear Information System (INIS)

Gubel, P.; Collard, G.

1998-01-01

The Belgian MTR reactor is fuelled with HEU UAl x elements and the fuel cycle was normally closed by reprocessing consecutively in Belgium (Eurochemic), France (Marcoule) and finally in the U.S.A. (Idaho Falls and Savannah River). When the acceptance of spent fuel by the U.S. was terminated, the facility was left with a huge backlog of used elements stored under water. After a few years, urgent and mandatory actions were required to maintain the BR2 facility operating. Later the accent was put on the evaluation of an optimum long term solution for the BR2 spent fuel during the projected 15 years life extension after the refurbishment executed between 1995 and 1997. The paper gives an overview of these successive actions taken during the last years as well as the handled various criteria for comparing and evaluating the available long-term alternatives. After commitment to reprocessing in existing facilities operated for aluminum fuels the focus of the BR2 fuel cycle strategy is now moving to the procurement of the necessary HEU fuel for securing the long-term operation of the facility. (author)

The Spent Fuel Management in Finland and Modifications of Spent Fuel Storages

International Nuclear Information System (INIS)

Maaranen, Paeivi

2014-01-01

The objective of this presentation is to share the Finnish regulator's (STUK) experiences on regulatory oversight of the enlargement of a spent fuel interim storage. An overview of the current situation of spent fuel management in Finland will also be given. In addition, the planned modifications and requirements set for spent fuel storages due to the Fukushima accident are discussed. In Finland, there are four operating reactors, one under construction and two reactors that have a Council of State's Decision-in-Principle to proceed with the planning and licensing of a new reactor. In Olkiluoto, the two operating ASEA-Atom BWR units and the Areva EPR under construction have a shared interim storage for the spent fuel. The storage was designed and constructed in 1980's. The option for enlarging the storage was foreseen in the original design. Considering three operating units to produce their spent fuel and the final disposal to begin in 2022, extra space in the spent fuel storage is estimated to be needed in around 2014. The operator decided to double the number of the spent fuel pools of the storage and the construction began in 2010. The capacity of the enlarged spent fuel storage is considered to be sufficient for the three Olkiluoto units. The enlargement of the interim storage was included in Olkiluoto NPP 1 and 2 operating license. The licensing of the enlargement was conducted as a major plant modification. The operator needed the approval from STUK to conduct the enlargement. Prior to the construction of this modification, the operator was required to submit the similar documentation as needed for applying for the construction license of a nuclear facility. When conducting changes in an old nuclear facility, the new safety requirements have to be followed. The major challenge in the designing the enlargement of the spent fuel storage was to modify it to withstand a large airplane crash. The operator chose to cover the pools with protecting slabs and also to

Recent advances in hardware and software are to improve spent fuel measurements

International Nuclear Information System (INIS)

Staples, P.; Beddingfield, D.H.; Lestone, J.P.; Pelowitz, D.G.; Bytchkov, M.; Starovich, Z.; Harizanov, I.; Luna-Vellejo, J.; Lavender, C.

2001-01-01

Vast quantities of spent fuel are available for safeguard measurements, primarily in Commonwealth of Independent States (CIS) of the former Soviet Union. This spent fuel, much of which consists of long-cooling-time material, is going to become less unique in the world safeguards arena as reprocessing projects or permanent repositories continue to be delayed or postponed. The long cooling time of many of the spent fuel assemblies being prepared for intermediate term storage in the CIS countries promotes the possibility of increased accuracy in spent fuel assays. This improvement is made possible through the process of decay of the Curium isotopes and of fission products. An important point to consider for the future that could advance safeguards measurements for reverification and inspection would be to determine what safeguards requirements should be imposed upon this 'new' class of spent fuel, Improvements in measurement capability will obviously affect the safeguards requirements. What most significantly enables this progress in spent fuel measurements is the improvement in computer processing power and software enhancements leading to user-friendly Graphical User Interfaces (GUT's). The software used for these projects significantly reduces the IAEA inspector's time expenditure for both learning and operating computer and data acquisition systems, At the same time, by standardizing the spent fuel measurements, it is possible to increase reproducibility and reliability of the measurement data. Hardware systems will be described which take advantage of the increased computer control available to enable more complex measurement scenarios. A specific example of this is the active regulation of a spent fuel neutron coincident counter's 3 He tubes high voltage, and subsequent scaling of measurement results to maintain a calibration for direct assay of the plutonium content of Fast Breeder Reactor spent fuel. The plutonium content has been successfully determined for

Case histories of West Valley spent fuel shipments: Final report

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

In 1983, NRC/FC initiated a study on institutional issues related to spent fuel shipments originating at the former spent fuel processing facility in West Valley, New York. FC staff viewed the shipment campaigns as a one-time opportunity to document the institutional issues that may arise with a substantial increase in spent fuel shipping activity. NRC subsequently contracted with the Aerospace Corporation for the West Valley Study. This report contains a detailed description of the events which took place prior to and during the spent fuel shipments. The report also contains a discussion of the shipment issues that arose, and presents general findings. Most of the institutional issues discussed in the report do not fall under NRC's transportation authority. The case histories provide a reference to agencies and other institutions that may be involved in future spent fuel shipping campaigns. 130 refs., 7 figs., 19 tabs.

Case histories of West Valley spent fuel shipments: Final report

International Nuclear Information System (INIS)

1987-01-01

In 1983, NRC/FC initiated a study on institutional issues related to spent fuel shipments originating at the former spent fuel processing facility in West Valley, New York. FC staff viewed the shipment campaigns as a one-time opportunity to document the institutional issues that may arise with a substantial increase in spent fuel shipping activity. NRC subsequently contracted with the Aerospace Corporation for the West Valley Study. This report contains a detailed description of the events which took place prior to and during the spent fuel shipments. The report also contains a discussion of the shipment issues that arose, and presents general findings. Most of the institutional issues discussed in the report do not fall under NRC's transportation authority. The case histories provide a reference to agencies and other institutions that may be involved in future spent fuel shipping campaigns. 130 refs., 7 figs., 19 tabs

Redesign of the spent fuel storage racks at the Trojan Nuclear Plant

International Nuclear Information System (INIS)

Stump, K.

1987-01-01

The spent fuel pool (SFP) at the Trojan Nuclear Plant located near Prescott, Oregon, was originally designed to hold 1.33 cores worth of spent fuel assemblies. Due to the delay in the site selection and preparation process for the spent fuel repository, the SFP storage capacity was increased in 1978 from 260 assemblies to 651 assemblies and in 1983 was increased again from 651 to 1408 assemblies to allow Trojan to continue operations through the year 2003 with a full core reserve in the SFP. Now it appears unlikely that a high level waste repository will be in operation before 2010. This indicates that a further capacity increase in the SFP is required to allow commercial operation until 2010, at which time the repository should be open to receive spent fuel. To accomplish this, an increase of seven times the original SFP capacity of 260 assemblies is needed. This paper presents a spent fuel assembly rack design that enables the required capacity increase in the SFP to be met. By the use of a boron carbide - silicon polymer inside a titanium/vanadium honeycomb as a neutron absorber between the fuel assemblies and by increasing the metal to water ratio of the spent fuel pool to harden the neutron energy spectrum the capacity of the SFP is increased to 1880 assemblies for an increase of 7.23 times the original spent fuel pool capacity. The multiplication factor for the pool with every fuel assembly slot filled in the new rack system is 0.62; well below the NRC regulatory limit of keff < 0.95. The capacity increase with allow the commercial operation of the Trojan Nuclear Plant through 2010 with a full core reserve in the spent fuel pool

The influence of evaluation protocol on time spent exercising at a high level of oxygen uptake during continuous cycling.

Science.gov (United States)

Merry, K L; Glaister, M; Howatson, G; Van Someren, K

2015-10-01

This study evaluated the effects of protocol variation on the time spent exercising at ≥95% V̇O2max during cycle ergometer trials performed at the exercise intensity associated with V̇O2max (iV̇O2max). Nine male triathletes (age: 32±10 years; body mass: 73.3±6.1 kg; stature: 1.79±0.07 m; V̇O2max: 3.58±0.45 L.min(-1)) performed four exercise tests. During tests 1 and 2, participants performed a maximal incremental cycle ergometer test using different stage durations (1 min and 3 min) for the determination of iV̇O2max (1 min) and iV̇O2max (3 min). During tests 3 and 4, participants performed a continuous bout of exhaustive cycling at iV̇O2max (1 min) (CONT1) and iV̇O2max (3 min) (CONT3). iV̇O2max (1 min) was significantly greater (Pexercising continuously at iV̇O2max, time spent at ≥95% V̇O2max is influenced by the initial measurement of iV̇O2max.

Status of US program for disposal of spent nuclear fuel

International Nuclear Information System (INIS)

Smith, R.I.

1991-04-01

In this paper, a brief history of the United States' program for the disposal of spent nuclear fuel (SNF) and the legislative acts that have guided the program are discussed. The current plans and schedules for beginning acceptance of SNF from the nuclear utilities for disposal are described, and some of the development activities supporting the program are discussed. And finally, the viability of the SNF disposal fee presently paid into the Nuclear Waste Fund by the owners/generators of commercial SNF and high-level waste (HLW) is examined. 12 refs., 9 figs

Associations Between Waiting Times, Service Times, and Patient Satisfaction in an Endocrinology Outpatient Department: A Time Study and Questionnaire Survey.

Science.gov (United States)

Xie, Zhenzhen; Or, Calvin

2017-01-01

The issue of long patient waits has attracted increasing public attention due to the negative effects of waiting on patients' satisfaction with health care. The present study examined the associations between actual waiting time, perceived acceptability of waiting time, actual service time, perceived acceptability of service time, actual visit duration, and the level of patient satisfaction with care. We conducted a cross-sectional time study and questionnaire survey of endocrinology outpatients visiting a major teaching hospital in China. Our results show that actual waiting time was negatively associated with patient satisfaction regarding several aspects of the care they received. Also, patients who were less satisfied with the sociocultural atmosphere and the identity-oriented approach to their care tended to perceive the amounts of time they spent waiting and receiving care as less acceptable. It is not always possible to prevent dissatisfaction with waiting, or to actually reduce waiting times by increasing resources such as increased staffing. However, several improvements in care services can be considered. Our suggestions include providing clearer, more transparent information to keep patients informed about the health care services that they may receive, and the health care professionals who are responsible for those services. We also suggest that care providers are encouraged to continue to show empathy and respect for patients, that patients are provided with private areas where they can talk with health professionals and no one can overhear, and that hospital staff treat the family members or friends who accompany patients in a courteous and friendly way.

Developing Spent Fuel Assembly for Advanced NDA Instrument Calibration - NGSI Spent Fuel Project

Energy Technology Data Exchange (ETDEWEB)

Hu, Jianwei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gauld, Ian C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Banfield, James [GE Hitachi Nuclear Energy, Wilmington, NC (United States); Skutnik, Steven [Univ. of Tennessee, Knoxville, TN (United States)

2014-02-01

This report summarizes the work by Oak Ridge National Laboratory to investigate the application of modeling and simulation to support the performance assessment and calibration of the advanced nondestructive assay (NDA) instruments developed under the Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) Project. Advanced NDA instrument calibration will likely require reference spent fuel assemblies with well-characterized nuclide compositions that can serve as working standards. Because no reference spent fuel standard currently exists, and the practical ability to obtain direct measurement of nuclide compositions using destructive assay (DA) measurements of an entire fuel assembly is prohibitive in the near term due to the complexity and cost of spent fuel experiments, modeling and simulation will be required to construct such reference fuel assemblies. These calculations will be used to support instrument field tests at the Swedish Interim Storage Facility (Clab) for Spent Nuclear Fuel.

Adding value to the meat of spent laying hens manufacturing sausages with a healthy appeal

Directory of Open Access Journals (Sweden)

KMR de Souza

2011-03-01

Full Text Available The aim of this study was to evaluate the viability of the use of spent laying hens' meat in the manufacturing of mortadella-type sausages with healthy appeal by using vegetable oil instead of animal fat. 120 Hy-line® layer hens were distributed in a completely randomized design into two treatments of six replicates with ten birds each. The treatments were birds from light Hy-line® W36 and semi-heavy Hy-line® Brown lines. Cold carcass, wing, breast and leg fillets yields were determined. Dry matter, protein, and lipid contents were determined in breast and leg fillets. The breast and legg fillets of three replicates per treatment were used to manufacture mortadella. After processing, sausages were evaluated for proximal composition, objective color, microbiological parameters, fatty acid profile and sensory acceptance. The meat of light and semi-heavy spent hens presented good yield and composition, allowing it to be used as raw material for the manufacture of processed products. Mortadellas were safe from microbiological point of view, and those made with semi-heavy hens fillets were redder and better accepted by consumers. Values for all sensory attributes were evaluated over score 5 (neither liked nor disliked. Both products presented high polyunsaturated fatty acid contents and good polyunsaturated to saturated fatty acid ratio. The excellent potential for the use of meat from spent layer hens of both varieties in the manufacturing of healthier mortadella-type sausage was demonstrated.

Spent fuel management in Japan

International Nuclear Information System (INIS)

Mineo, H.; Nomura, Y.; Sakamoto, K.

1998-01-01

In Japan 52 commercial nuclear power units are now operated, and the total power generation capacity is about 45 GWe. The cumulative amount of spent fuel arising is about 13,500 tU as of March 1997. Spent fuel is reprocessed, and recovered nuclear materials are to be recycled in LWRs and FBRs. In February 1997 short-term policy measures were announced by the Atomic Energy Commission, which addressed promotion of reprocessing programme in Rokkasho, plutonium utilization in LWRs, spent fuel management, backend measures and FBR development. With regard to the spent fuel management, the policy measures included expansion of spent fuel storage capacity at reactor sites and a study on spent fuel storage away from reactor sites, considering the increasing amount of spent fuel arising. Research and development on spent fuel storage has been carried out, particularly on dry storage technology. Fundamental studies are also conducted to implement the burnup credit into the criticality safety design of storage and transportation casks. Rokkasho reprocessing plant is being constructed towards its commencement in 2003, and Pu utilization in LWRs will be started in 1999. Research and development of future recycling technology are also continued for the establishment of nuclear fuel cycle based on FBRs and LWRs. (author)

Advances in flaw evaluation procedures and acceptance criteria for reactor piping

International Nuclear Information System (INIS)

Gamble, R.M.; Zahoor, A.; Norris, D.M.

1986-01-01

During the past several years, intergranular stress corrosion cracks (IGSCC) have been detected in stainless steel piping in boiling water reactors (BWRs) and have resulted in an increased number of flaw evaluations. To reduce the outage time associated with evaluating IGSCC, various research and ASME code groups have spent significant effort to provide utility personnel with efficient means to detect, classify, and size flaws, and to determine suitability for return to service for flawed stainless steel piping. One of the several nondestructive evaluation technologies that has received considerable attention is fracture mechanics, the discipline that considers the failure of flawed material. Fracture mechanics can be used to answer two key questions concerning return to service of flawed pipe: (a) what is the largest flaw size that can be returned to service and still maintain adequate safety margins at the applied loads, and (b) how much operating time remains before the crack reaches the largest allowable size? The purpose of this paper is to provide an overview of the recently developed ASME code Section XI flaw size evaluation procedure and acceptance criteria for stainless steel piping and their application by BWR owners to efficiently determine if flaws found by nondestructive examination are acceptable for continued service

Advances in flaw evaluation procedures and acceptance criteria for reactor piping

Energy Technology Data Exchange (ETDEWEB)

Gamble, R.M.; Zahoor, A.; Norris, D.M.

1986-01-01

During the past several years, intergranular stress corrosion cracks (IGSCC) have been detected in stainless steel piping in boiling water reactors (BWRs) and have resulted in an increased number of flaw evaluations. To reduce the outage time associated with evaluating IGSCC, various research and ASME code groups have spent significant effort to provide utility personnel with efficient means to detect, classify, and size flaws, and to determine suitability for return to service for flawed stainless steel piping. One of the several nondestructive evaluation technologies that has received considerable attention is fracture mechanics, the discipline that considers the failure of flawed material. Fracture mechanics can be used to answer two key questions concerning return to service of flawed pipe: (a) what is the largest flaw size that can be returned to service and still maintain adequate safety margins at the applied loads, and (b) how much operating time remains before the crack reaches the largest allowable size. The purpose of this paper is to provide an overview of the recently developed ASME code Section XI flaw size evaluation procedure and acceptance criteria for stainless steel piping and their application by BWR owners to efficiently determine if flaws found by nondestructive examination are acceptable for continued service.

Application of ALARA principles to shipment of spent nuclear fuel

International Nuclear Information System (INIS)

Greenborg, J.; Brackenbush, L.W.; Murphy, D.W.; Burnett, R.A.; Lewis, J.R.

1980-05-01

The public exposure from spent fuel shipment is very low. In view of this low exposure and the perfect safety record for spent fuel shipment, existing systems can be considered satisfactory. On the other hand, occupational exposure reduction merits consideration and technology improvement to decrease dose should concentrate on this exposure. Practices that affect the age of spent fuel in shipment and the number of times the fuel must be shipped prior to disposal have the largest impact. A policy to encourage a 5-year spent fuel cooling period prior to shipment coupled with appropriate cask redesign to accommodate larger loads would be consistent with ALARA and economic principles. And finally, bypassing high population density areas will not in general reduce shipment dose

Spent nuclear fuels project: FY 1995 multi-year program plan, WBS {number_sign}1.4

Energy Technology Data Exchange (ETDEWEB)

Denning, J.L.

1994-09-01

The mission of the Spent Nuclear Fuel (SNF) program is to safely, reliably, and efficiently manage, condition, transport, and store Department of Energy (DOE)-owned SNF, so that it meets acceptance criteria for disposal in a permanent repository. The Hanford Site Spent Nuclear Fuel strategic plan for accomplishing the project mission is: Establish near-term safe storage in the 105-K Basins; Complete national Environmental Policy Act (NEPA) process to obtain a decision on how and where spent nuclear fuel will be managed on the site; Define and establish alternative interim storage on site or transport off site to support implementation of the NEPA decision; and Define and establish a waste package qualified for final disposition. This report contains descriptions of the following: Work Breakdown Structure; WBS Dictionary; Responsibility Assignment Matrix; Program Logic Diagrams; Program Master Baseline Schedule; Program Performance Baseline Schedule; Milestone List; Milestone Description Sheets; Cost Baseline Summary by Year; Basis of Estimate; Waste Type Data; Planned Staffing; and Fiscal Year Work Plan.

Spent nuclear fuels project: FY 1995 multi-year program plan, WBS number-sign 1.4

International Nuclear Information System (INIS)

Denning, J.L.

1994-09-01

The mission of the Spent Nuclear Fuel (SNF) program is to safely, reliably, and efficiently manage, condition, transport, and store Department of Energy (DOE)-owned SNF, so that it meets acceptance criteria for disposal in a permanent repository. The Hanford Site Spent Nuclear Fuel strategic plan for accomplishing the project mission is: Establish near-term safe storage in the 105-K Basins; Complete national Environmental Policy Act (NEPA) process to obtain a decision on how and where spent nuclear fuel will be managed on the site; Define and establish alternative interim storage on site or transport off site to support implementation of the NEPA decision; and Define and establish a waste package qualified for final disposition. This report contains descriptions of the following: Work Breakdown Structure; WBS Dictionary; Responsibility Assignment Matrix; Program Logic Diagrams; Program Master Baseline Schedule; Program Performance Baseline Schedule; Milestone List; Milestone Description Sheets; Cost Baseline Summary by Year; Basis of Estimate; Waste Type Data; Planned Staffing; and Fiscal Year Work Plan

Safety aspects of dry spent fuel storage and spent fuel management

International Nuclear Information System (INIS)

Botsch, W.; Smalian, S.; Hinterding, P.; Voelzke, H.; Wolff, D.; Kasparek, E.

2014-01-01

The storage of spent nuclear fuel (SF) and high-level radioactive waste (HLW) must conform to safety requirements. Safety aspects like safe enclosure of radioactive materials, safe removal of decay heat, nuclear criticality safety and avoidance of unnecessary radiation exposure must be achieved throughout the storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. In Germany dual purpose casks for SF or HLW are used for safe transportation and interim storage. TUV and BAM, who work as independent experts for the competent authorities, present the storage licensing process including sites and casks and inform about spent nuclear fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields (authors)

Time Spent With Children and Working Parents’ Willingness to Medicate ADHD-Like Behaviors

Directory of Open Access Journals (Sweden)

Bora Pajo

2013-11-01

Full Text Available How much time parents spend with their children is likely to influence their judgments of children’s behaviors and the behaviors themselves. In the diagnosis of children with attention-deficit/hyperactivity disorder (ADHD, parents are key informants and decide whether their children should receive medication. This exploratory study investigates the relationship between working parents’ willingness to medicate ADHD-like behaviors and the time they can spend with their children during a regular workday. The participants (409 parents of 5- to 17- year-old children reporting having no child with emotional or behavioral problems and 87 reporting having such a child were drawn from a population-based telephone survey of parents stratified by race and ethnicity in two urban Florida counties. Path analysis models, controlling for selected sociodemographic and household variables, showed that spending more time with one’s children during a regular workday and self-identifying as African American were negatively related to willingness to medicate among parents of children with problems. Among parents reporting no children with problems, only the number of children in the household and the parent-type household showed relationships to willingness to medicate, while mothers were more likely than fathers to spend more time with children. These observed relationships were of moderate effect but underscore the importance to initiate studies using valid measures of quantity and quality of parental time spent with ADHD children, and to query parents on these points when assessing the information they provide to clinicians.

The spent fuel safety experiment

International Nuclear Information System (INIS)

Harmms, G.A.; Davis, F.J.; Ford, J.T.

1995-01-01

The Department of Energy is conducting an ongoing investigation of the consequences of taking fuel burnup into account in the design of spent fuel transportation packages. A series of experiments, collectively called the Spent Fuel Safety Experiment (SFSX), has been devised to provide integral benchmarks for testing computer-generated predictions of spent fuel behavior. A set of experiments is planned in which sections of unirradiated fuel rods are interchanged with similar sections of spent PWR fuel rods in a critical assembly. By determining the critical size of the arrays, one can obtain benchmark data for comparison with criticality safety calculations. The integral reactivity worth of the spent fuel can be assessed by comparing the measured delayed critical fuel loading with and without spent fuel. An analytical effort to model the experiments and anticipate the core loadings required to yield the delayed critical conditions runs in parallel with the experimental effort

Teen worker safety training: methods used, lessons taught, and time spent.

Science.gov (United States)

Zierold, Kristina M

2015-05-01

Safety training is strongly endorsed as one way to prevent teens from performing dangerous tasks at work. The objective of this mixed methods study was to characterize the safety training that teenagers receive on the job. From 2010 through 2012, focus groups and a cross-sectional survey were conducted with working teens. The top methods of safety training reported were safety videos (42 percent) and safety lectures (25 percent). The top lessons reported by teens were "how to do my job" and "ways to spot hazards." Males, who were more likely to do dangerous tasks, received less safety training than females. Although most teens are getting safety training, it is inadequate. Lessons addressing safety behaviors are missing, training methods used are minimal, and the time spent is insignificant. More research is needed to understand what training methods and lessons should be used, and the appropriate safety training length for effectively preventing injury in working teens. In addition, more research evaluating the impact of high-quality safety training compared to poor safety training is needed to determine the best training programs for teens. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Evaluation of potential food applications of dried distillers spent grain (DSG). Final research report

Energy Technology Data Exchange (ETDEWEB)

1981-02-06

Results from experimental test bakes indicate that dried distillers spent grain (DSG) can be used to replace up to 15% of the flour for the production of an acceptable variety bread, provided that the DSG is processed under optimum conditions for a satisfactory flavor and color development. The raw materials used for the mash bill may also affect the taste of the finished product. (MHR)

Neutron absorber qualification and acceptance testing from the designer's perspective

Energy Technology Data Exchange (ETDEWEB)

Bracey, W. [Transnuclear, Inc, Hawthorne, NY (United States); Chiocca, R. [Cogema Logistics, St. Quentin en Yvelines (France)

2004-07-01

Starting in the mid 1990's, the USNRC began to require less than 100% credit for the 10B present in fixed neutron absorbers spent fuel transport packages. The current practice in the US is to use only 75% of the specified 10B in criticality safety calculations unless extensive acceptance testing demonstrates both the presence of the 10B and uniformity of its distribution. In practice, the NRC has accepted no more than 90% credit for 10B in recent years, while other national competent authorities continue to accept 100%. More recently, with the introduction of new neutron absorber materials, particularly aluminum / boron carbide metal matrix composites, the NRC has also expressed expectations for qualification testing, based in large part on Transnuclear's successful application to use a new composite material in the TN-68 storage / transport cask. The difficulty is that adding more boron than is really necessary to a metal has some negative effects on the material, reducing the ductility and the thermal conductivity, and increasing the cost. Excessive testing requirements can have the undesired effect of keeping superior materials out of spent fuel package designs, without a corresponding justification based on public safety. In European countries and especially in France, 100% credit has been accepted up to now with materials controls specified in the Safety Analysis Report (SAR): Manufacturing process approved by qualification testing Materials manufacturing controlled under a Quality Assurance system. During fabrication, acceptance testing directly on products or on representative samples. Acceptance criteria taking into account a statistical uncertainty corresponding to 3{sigma}. The original and current bases for the reduced {sup 10}B credit, the design requirements for neutron absorber materials, and the experience of Transnuclear and Cogema Logistics with neutron absorber testing are examined. Guidelines for qualification and acceptance testing and

Disposal of spent nuclear fuel

International Nuclear Information System (INIS)

1979-12-01

This report addresses the topic of the mined geologic disposal of spent nuclear fuel from Pressurized Water Reactors (PWR) and Boiling Water Reactors (BWR). Although some fuel processing options are identified, most of the information in this report relates to the isolation of spent fuel in the form it is removed from the reactor. The characteristics of the waste management system and research which relate to spent fuel isolation are discussed. The differences between spent fuel and processed HLW which impact the waste isolation system are defined and evaluated for the nature and extent of that impact. What is known and what needs to be determined about spent fuel as a waste form to design a viable waste isolation system is presented. Other waste forms and programs such as geologic exploration, site characterization and licensing which are generic to all waste forms are also discussed. R and D is being carried out to establish the technical information to develop the methods used for disposal of spent fuel. All evidence to date indicates that there is no reason, based on safety considerations, that spent fuel should not be disposed of as a waste

Neutron intensity of fast reactor spent fuel

Energy Technology Data Exchange (ETDEWEB)

Takamatsu, Misao; Aoyama, Takafumi [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

1998-03-01

Neutron intensity of spent fuel of the JOYO Mk-II core with a burnup of 62,500 MWd/t and cooling time of 5.2 years was measured at the spent fuel storage pond. The measured data were compared with the calculated values based on the JOYO core management code system `MAGI`, and the average C/E approximately 1.2 was obtained. It was found that the axial neutron intensity didn`t simply follow the burnup distribution, and the neutron intensity was locally increased at the bottom end of the fuel region due to an accumulation of {sup 244}Cm. (author)

Collective processing device for spent fuel

International Nuclear Information System (INIS)

Irie, Hiroaki; Taniguchi, Noboru.

1996-01-01

The device of the present invention comprises a sealing vessel, a transporting device for transporting spent fuels to the sealing vessel, a laser beam cutting device for cutting the transported spent fuels, a dissolving device for dissolving the cut spent fuels, and a recovering device for recovering radioactive materials from the spent fuels during processing. Reprocessing treatments comprising each processing of dismantling, shearing and dissolving are conducted in the sealing vessel can ensure a sealing barrier for the radioactive materials (fissionable products and heavy nuclides). Then, since spent fuels can be processed in a state of assemblies, and the spent fuels are easily placed in the sealing vessel, operation efficiency is improved, as well as operation cost is saved. Further, since the spent fuels can be cut by a remote laser beam operation, there can be prevented operator's exposure due to radioactive materials released from the spent fuels during cutting operation. (T.M.)

IAEA activities related to research reactor fuel conversion and spent fuel return programmes

International Nuclear Information System (INIS)

Ritchie, I.G.; Adelfang, P.; Goldman, I.N.

2004-01-01

Full text: The IAEA has been involved for more than twenty years in supporting international nuclear non-proliferation efforts associated with reducing the amount of highly enriched uranium (HEU) in international commerce. IAEA projects and activities have directly supported the Reduced Enrichment for Research and Test Reactors (RERTR) programme, as well as directly associated efforts to return research reactor fuel to the country of origin where it was originally enriched. IAEA efforts have included the development and maintenance of several data bases with information related to research reactors and research reactor spent fuel inventories that have been essential in planning and managing both RERTR and spent fuel return programmes. Other IAEA regular budget programmes have supported research reactor fuel conversion from HEU to low enriched uranium, and in addressing issues common to many member states with spent fuel management problems and concerns. The paper briefly describes IAEA involvement since the early 1980's in these areas, including regular budget and Technical Co-operation programme activities, and focuses on efforts in the past five years to continue to support and accelerate U.S. and Russian research reactor spent fuel return programmes. It is hoped that an announcement of the extension of the U.S. Acceptance Programme, which is expected in the very near future, will facilitate the life extensions of many productive TRIGA reactors around the world. (author)

Time and dose assessment of barge shipment and at-reactor handling of a CASTOR V/21 spent fuel storage cask

Energy Technology Data Exchange (ETDEWEB)

Hostick, C.J. (Pacific Northwest Lab., Richland, WA (United States)); Lavender, J.C. (Westinghouse Hanford Co., Richland, WA (United States)); Wakeman, B.H. (Virginia Electric and Power Co., Richmond, VA (United States))

1992-04-01

This report contains the results of a time/motion analysis and a radiation dose assessment made during the receipt from barge transport and the loading of CAst iron cask for Storage and Transport Of Radioactive material (CASTOR) V/21 storage casks with spent nuclear fuel at the Surry Power Station in Virginia during 1987. The study was a cooperative effort between Pacific Northwest Laboratory (PNL) and Virginia Electric and Power Company (Virginia Power), and was funded by the US Department of Energy (DOE) Transportation Program Office. In this study, cask handling activities were tracked at the Surry Power Station, tracing the transfer of the empty spent fuel storage cask from an ocean-going vessel to a barge for river transport through the activities required to place the loaded storage cask at an at-reactor storage location.

Time/motion observations and dose analysis of reactor loading, transportation, and dry unloading of an overweight truck spent fuel shipment

International Nuclear Information System (INIS)

Hostick, C.J.; Lavender, J.C.; Wakeman, B.H.

1992-04-01

This document presents observed activity durations and radiation dose analyses for an overweight truck shipment of pressurized water reactor (PWR) spent fuel from the Surry Power Station in Virginia to the Idaho National Engineering Laboratory. The shipment consisted of a TN-8L shipping cask carrying three 9-year-old PWR spent fuel assemblies. Handling times and dose analyses for at-reactor activities were completed by Virginia Electric and Power Company (Virginia Power) personnel. Observations of in-transit and unloading activities were made by Pacific Northwest Laboratory (PNL) personnel, who followed the shipment for approximately 2800 miles and observed cask unloading activities. In-transit dose estimates were calculated using dose rate maps provided by Virginia Power for a fully loaded TN-8L shipping cask. The dose analysis for the cask unloading operations is based on the observations of PNL personnel

Physical activity and time spent sitting as a risk factor for low-back pain: longitudinal data from the HUNT study

OpenAIRE

Venseth, Torje Bragstad

2014-01-01

Background: Low back pain (LBP) is the most common pain condition with a lifetime prevalence of 70 %. One of the most investigated risk factor for LBP is sedentary lifestyle. This is of great interest as sitting is the more dominant occupational activity in today’s society. Aim: The aim of this study was to prospectively investigate if the risk of chronic LBP is associated with time spent sitting, leisure time physical activity, and occupational activity. We also examined the combined eff...

DETERMINANT FACTORS OF TIME SPENT ON FACEBOOK: BRAND COMMUNITY ENGAGEMENT AND USAGE TYPES

OpenAIRE

ULUSU, Yard. Doç. Dr. Yeşim

2010-01-01

Online  social  networks  have  integrated  into  the  computer  mediated  communication  (CMC) environment  in  the  past  few  years.  Social  Networks  such  as  Facebook,  Myspace,  Bebo  and  Twitter  are  web‐based services that allow people to create a public profile, share the connection with other users, and view and traverse  their  list  of  connections  in  common  network.  The  aim  of  this  study  is  to  find  factors  affecting  the amount  of  time  users  spent  on  Facebo...

Acceptance of waste for disposal in the potential United States repository at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Stahl, D.; Svinicki, K.

1996-01-01

This paper addresses the process for the acceptance of waste into the waste management system (WMS) with a focus on the detailed requirements identified from the Waste Acceptance System Requirements Document. Also described is the recent dialogue between OCRWM and the Office of Environmental Management to resolve issues, including the appropriate interpretation and application of regulatory and system requirements to DOE-owned spent fuel. Some information is provided on the design of the repository system to aid the reader in understanding how waste that is accepted into the WMS is received and emplaced in the repository

[Acceptance by blood donors of the public blood bank in Recife, Brazil].

Science.gov (United States)

de Araújo, Fábia Michelle Rodrigues; Feliciano, Katia Virginia de Oliveira; Mendes, Marina Ferreira de Medeiros

2011-12-01

This study evaluated the acceptance of blood donors concerning the donation stages (attendance, medical and nursing selection and collection) at the Recife public blood bank with emphasis on the attendance. A sample of 527 donors was obtained: each 19th person sequentially was invited to answer a questionnaire. Chi-square (x2) was used in the analysis. Of those interviewed, 81.4% were men, 81% were repeat donors, 50.3% were dissatisfied regarding the time spent in donation and 36.4% had difficulties in reaching the service. The firm acceptance given to the attendance was due mainly to the communication and the quality of treatment. Of statistical significance were women donors of higher educational level who asked for more information and men who had a more positive perception towards the selection process. The best evaluation was attributed to the collection sector. However, mention was made of impersonal treatment, persistence of doubts and the cursory nature of the medical interview. Attention focused on the donor requires that ongoing education should concentrate on the humanitarian formation of the professionals involved.

The new revision of NPP Krsko decommissioning, radioactive waste and spent fuel management program: analyses and results

International Nuclear Information System (INIS)

Zeleznik, Nadja; Kralj, Metka; Lokner, Vladimir; Levanat, Ivica; Rapic, Andrea; Mele, Irena

2010-01-01

The preparation of the new revision of the Decommissioning and Spent Fuel (SF) and Low and Intermediate level Waste (LILW) Disposal Program for the NPP Krsko (Program) started in September 2008 after the acceptance of the Term of Reference for the work by Intergovernmental Committee responsible for implementation of the Agreement between the governments of Slovenia and Croatia on the status and other legal issues related to investment, exploitation, and decommissioning of the Nuclear power plant Krsko. The responsible organizations, APO and ARAO together with NEK prepared all new technical and financial data and relevant inputs for the new revision in which several scenarios based on the accepted boundary conditions were investigated. The strategy of immediate dismantling was analyzed for planned and extended NPP life time together with linked radioactive waste and spent fuel management to calculate yearly annuity to be paid by the owners into the decommissioning funds in Slovenia and Croatia. The new Program incorporated among others new data on the LILW repository including the costs for siting, construction and operation of silos at the location Vrbina in Krsko municipality, the site specific Preliminary Decommissioning Plan for NPP Krsko which included besides dismantling and decontamination approaches also site specific activated and contaminated radioactive waste, and results from the referenced scenario for spent fuel disposal but at very early stage. Important inputs for calculations presented also new amounts of compensations to the local communities for different nuclear facilities which were taken from the supplemented Slovenian regulation and updated fiscal parameters (inflation, interest, discount factors) used in the financial model based on the current development in economical environment. From the obtained data the nominal and discounted costs for the whole nuclear program related to NPP Krsko which is jointly owned by Slovenia and Croatia have

Status and trends in spent fuel reprocessing. Proceedings of an advisory group meeting

International Nuclear Information System (INIS)

1999-08-01

Spent fuel management has always been an important part of the nuclear fuel cycle and is still one of the most important activities in all countries exploiting the peaceful use of nuclear energy. Continuous attention is being given by the IAEA to the collection, analysis and exchange of information on spent fuel management. Its role in this area is to provide a forum for exchanging information and to coordinate and encourage closer co-operation among Member States in certain research and developing activities that are of common interest. As part of spent fuel management, reprocessing activities have been reviewed from time to time on a low profile level under the terminology 'spent fuel treatment'. However, spent fuel treatment covers, in broad terms, spent fuel storage (short, interim and long term), fuel rod consolidation, reprocessing and, in case the once-through cycle is selected, conditioning of the spent fuel for disposal. Hence the reprocessing activities under the heading 'spent fuel treatment' were somewhat misleading. Several meetings on spent fuel treatment have been organized during the fast decade: an Advisory Group meeting (AGM) in 1992, a Technical Committee meeting in 1995 and recently an Advisory Group meeting from 7 to 10 September 1998. The objectives of the meetings were to review the status and trends of spent fuel reprocessing, to discuss the environmental impact and safety aspects of reprocessing facilities and to define the most important issues in this field. Notwithstanding the fact that the Summary of the report does not include aspects of military reprocessing, some of the national presentations do refer to some relevant aspects (e.g. experience, fissile stockpiles)

ASSESSMENT OF MICROBIAL LOAD OF SAUSAGES PREPARED FROM DIFFERENT COMBINATION OF SPENT DUCK AND SPENT HEN MEAT

Directory of Open Access Journals (Sweden)

Rajesh Kumar

2016-12-01

Full Text Available Aim of the present study was to assess the microbial load of sausages prepared from different combination of spent duck and spent hen meat. The combination are 100% spent duck (T1, 75%+ 25% spent duck and spent hen (T2, 50%+50% spent duck and spent hen (T3, 25%+75% spent duck and spent hen (T4 and 100% spent hen (T5. All the samples of different combination were subjected to total plate count (TPC, total psychrophilic count (TPSC and total Coliform count (TCC. Mean of TPC for T1, T2, T3, T4 and T5 were 4.69, 4.62, 4.60, 4.49 and 4.46 log 10 CFU/gm respectively, while mean TPSC were 4.46, 4.46, 4.43, 4.36 and 4.36 log CFU/gm respectively There were no significant (p<0.05 difference between the different group of combination of sausages for TPS as well as TPSC but varies significantly (p<0.05 from 14th day of storage in both cases. The coliform group of bacteria will not be detected in any combination of sausages. It is concluded that microbial load of sausage prepared from spent duck is high and it is decreases as the percentage of duck meat decreases but, the upper limit of bacteria in each group of sausages is within limit and hence it is safe for human consumption.

Encapsulation of spent nuclear fuel in ceramic materials

International Nuclear Information System (INIS)

Forberg, S.; Westermark, T.

1983-03-01

The international situation with regard to deposition of spent nuclear fuel is surveyed, with emphasis on encapsulation in ceramic materials. The feasibility and advantages of ceramic containers, thermodynamic stable in groundwater, are discussed as well as the possibility to ensure that stability for longevity by engineered measures. The design prerequisite are summarized and suggestions are made for a conceptual design, comprising rutile containers with stacks of coiled fuel pins. A novel technique is suggested for the homogeneous sealing of rutile containers at low temperatures. acceptable also for the fuel pin package. Key points are given for research, demonstration and verifications of the design foundations and for future improvements. Of which a few ideas are exemplified. (author)

Direct Measurement of Initial Enrichment, Burn-up and Cooling Time of Spent Fuel Assembly with a Differential Die-Away Technique Based Instrument

International Nuclear Information System (INIS)

Henzl, Vladimir; Swinhoe, Martyn T.; Tobin, Stephen J.

2012-01-01

An outline of this presentation of what a Differential Die-Away (DDA) instrument can do are: (1) Principle of operation of DDA instrument; (2) Determination of initial enrichment (IE) (σ DDA response increases (die-away time is longer) with increasing fissile content; and (2) Spent fuel => DDA response decreases (die-away time is shorter) with higher burn-up (i.e. more neutron absorbers present).

Strategies and solutions in the temporary management of spent fuel in Spain

International Nuclear Information System (INIS)

Martinez Abad, J. E.; Rivera, M. I.

2009-01-01

The basic strategy for the spent fuel and HLW management contemplated in the Sixth General Radioactive Waste Plan focused on the centralised interim storage of spent fuel, based on proved dry storage system technologies, over the time periods required until their definitive or very long term management. Specially, the solution proposed as the most suitable for the Spanish case is the construction of a centralised interim spent fuel and HLW storage facility (ATC) for which as site is being searched. Until it becomes in operation, the interim spent fuel storage will be safety performed in the NPP reracked spent fuel pools or individual ISFSI constructed in the NPP site, in those cases additional storage capacity is required. (Author) 22 refs

Probability of spent fuel transportation accidents

International Nuclear Information System (INIS)

McClure, J.D.

1981-07-01

The transported volume of spent fuel, incident/accident experience and accident environment probabilities were reviewed in order to provide an estimate of spent fuel accident probabilities. In particular, the accident review assessed the accident experience for large casks of the type that could transport spent (irradiated) nuclear fuel. This review determined that since 1971, the beginning of official US Department of Transportation record keeping for accidents/incidents, there has been one spent fuel transportation accident. This information, coupled with estimated annual shipping volumes for spent fuel, indicated an estimated annual probability of a spent fuel transport accident of 5 x 10 -7 spent fuel accidents per mile. This is consistent with ordinary truck accident rates. A comparison of accident environments and regulatory test environments suggests that the probability of truck accidents exceeding regulatory test for impact is approximately 10 -9 /mile

Prototypical spent fuel rod consolidation equipment preliminary design report: Volume 1, Report

International Nuclear Information System (INIS)

1986-01-01

This design report describes the NUS Preliminary Design of the Prototype Spent Nuclear Fuel Rod Consolidation Equipment for the Department of Energy. The sections of the report elaborate on each facet of the preliminary design. A concept summary is provided to assist the reader in rapidly understanding the complete design. The NUS Prototype Spent Fuel Rod Consolidation System is an automatically controlled system to consolidate a minimum of 750 MT (heavy metal)/year of US commercial nuclear reactor fuel, at 75% availability. The system is designed with replaceable components utilizing the latest state-of-the-art technology. This approach gives the system the flexibility to be developed without costly development programs, yet accept new technology as it evolves over the next ten years. Capability is also provided in the system design to accommodate a wide variety of fuel conditions and to recover from any situation which may arise

A Between- and Within-Person Analysis of Parenting And Time Spent in Criminogenic Settings during Adolescence: The Role of Self-Control And Delinquent Attitudes

Science.gov (United States)

Janssen, Heleen J.; Bruinsma, Gerben J. N.; Dekovic, Maja; Eichelsheim, Veroni I.

2018-01-01

Although spending time in criminogenic settings is increasingly recognized as an explanation for adolescent delinquency, little is known about its determinants. The current study aims to examine the extent to which (change in) self-control and (change in) delinquent attitudes relate to (change in) time spent in criminogenic settings, and the…

Soldiers for the virtual battlefield : Even at secondary school, Jan Paul van Waveren spent more time on computer games than on his homework, though he doesn't seem to have suffered from it

NARCIS (Netherlands)

Van Waveren, J.P.; Rothkrantz, L.; Jongeneel, C.

2001-01-01

Even at secondary school, Jan Paul van Waveren spent more time on computer games than on his homework,though he doesnt seem to have suffered from it. At university he spent some of his time linking up personal computers with his friends, trying to blast each other to virtual smithereens in a game of

Bioleaching of spent Ni-Cd batteries by continuous flow system: Effect of hydraulic retention time and process load

International Nuclear Information System (INIS)

Zhao Ling; Yang Dong; Zhu Nanwen

2008-01-01

Spent Ni-Cd batteries bring a severe environmental problem that needs to be solved urgently. A novel continuous flow two-step leaching system based on bioleaching was introduced to dissolve heavy metals in batteries. It consists of an acidifying reactor which was used to culture indigenous thiobacilli and a leaching reactor which was used to leach metals from spent batteries. The indigenous acidophilic thiobacilli in sewage sludge was used as the microorganisms and the sludge itself as culture medium. Bioleaching tests at different hydraulic retention time (HRT) and process load in the leaching reactor were performed. The results showed that the longer the HRT (1, 3, 6, 9 and 15 days) was, the more time required to achieve the complete leaching of Ni, Cd and Co. The maximum dissolution of cadmium and cobalt was achieved at higher pH values (3.0-4.5) while the leaching of nickel hydroxide and nickel in metallic form (Ni 0 ) were obtained separately in different acidity (pH 2.5-3.5). It cost about 25, 30 and more than 40 days to remove all of the three heavy metals with the process load of two, four and eight Ni-Cd batteries under the conditions that the ingoing bio-sulphuric acid was 1 L d -1 and HRT was 3 days

Bioleaching of spent Ni-Cd batteries by continuous flow system: effect of hydraulic retention time and process load.

Science.gov (United States)

Zhao, Ling; Yang, Dong; Zhu, Nan-Wen

2008-12-30

Spent Ni-Cd batteries bring a severe environmental problem that needs to be solved urgently. A novel continuous flow two-step leaching system based on bioleaching was introduced to dissolve heavy metals in batteries. It consists of an acidifying reactor which was used to culture indigenous thiobacilli and a leaching reactor which was used to leach metals from spent batteries. The indigenous acidophilic thiobacilli in sewage sludge was used as the microorganisms and the sludge itself as culture medium. Bioleaching tests at different hydraulic retention time (HRT) and process load in the leaching reactor were performed. The results showed that the longer the HRT (1, 3, 6, 9 and 15 days) was, the more time required to achieve the complete leaching of Ni, Cd and Co. The maximum dissolution of cadmium and cobalt was achieved at higher pH values (3.0-4.5) while the leaching of nickel hydroxide and nickel in metallic form (Ni0) were obtained separately in different acidity (pH 2.5-3.5). It cost about 25, 30 and more than 40 days to remove all of the three heavy metals with the process load of two, four and eight Ni-Cd batteries under the conditions that the ingoing bio-sulphuric acid was 1Ld(-1) and HRT was 3 days.

Bioleaching of spent Ni-Cd batteries by continuous flow system: Effect of hydraulic retention time and process load

Energy Technology Data Exchange (ETDEWEB)

Zhao Ling; Yang Dong [School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Zhu Nanwen [School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)], E-mail: nwzhu@sina.com

2008-12-30

Spent Ni-Cd batteries bring a severe environmental problem that needs to be solved urgently. A novel continuous flow two-step leaching system based on bioleaching was introduced to dissolve heavy metals in batteries. It consists of an acidifying reactor which was used to culture indigenous thiobacilli and a leaching reactor which was used to leach metals from spent batteries. The indigenous acidophilic thiobacilli in sewage sludge was used as the microorganisms and the sludge itself as culture medium. Bioleaching tests at different hydraulic retention time (HRT) and process load in the leaching reactor were performed. The results showed that the longer the HRT (1, 3, 6, 9 and 15 days) was, the more time required to achieve the complete leaching of Ni, Cd and Co. The maximum dissolution of cadmium and cobalt was achieved at higher pH values (3.0-4.5) while the leaching of nickel hydroxide and nickel in metallic form (Ni{sup 0}) were obtained separately in different acidity (pH 2.5-3.5). It cost about 25, 30 and more than 40 days to remove all of the three heavy metals with the process load of two, four and eight Ni-Cd batteries under the conditions that the ingoing bio-sulphuric acid was 1 L d{sup -1} and HRT was 3 days.

Government--utility interaction on spent fuel disposition

International Nuclear Information System (INIS)

Mills, L.E.

1978-01-01

The question of the needs of the electrical power industry for spent fuel storage in light of the moratorium on fuel reprocessing is addressed. The author feels that since the Federal government has assumed the responsibility for spent fuel storage, it is imperative that a firm plan, program, legislation, and funding be forthcoming immediately. Designation of an existing government site with existing nuclear activities in order to expedite the establishment of a storage facility is recommended. It is felt that the timing for such a site should be ''at the earliest possible date.'' Without storage facilities being provided by the government, utilities will be forced to build storage facilities at the reactor sites. This course of action is not considered cost effective but certainly preferable to shutting down the reactors. It is emphasized that spent fuel storage must be an interim solution and certainly not a final solution to the fuel reprocessing and waste disposal aspects of nuclear technology

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

International Nuclear Information System (INIS)

Morrow, A; Rangaraj, D; Perez-Andujar, A; Krishnamurthy, N

2016-01-01

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each were calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

Energy Technology Data Exchange (ETDEWEB)

Morrow, A [Scott & White Hospital Temple, TX (United States); Rangaraj, D [Baylor Scott & White Health, Temple, TX (United States); Perez-Andujar, A [University of California San Francisco, San Francisco, CA (United States); Krishnamurthy, N [Baylor Scott & White Healthcare, Temple, TX (United States)

2016-06-15

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each were calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.

Recycling of spent lead/acid batteries. The case of Greece

International Nuclear Information System (INIS)

Zabaniotou, A.; Kouskoumvekaki, E.; Sanopoulos, D.

1999-01-01

In this study, the application of modern recycling technologies in accordance with the European and Greek legislation, aiming at the recovery of lead, polypropylene and sulfuric acid from spent lead (Pb)/acid batteries, is presented. The present state of their disposal and exploitation is also depicted. The international situation is reviewed, the general trends are marked and the main technologies related to lead/acid battery treatment are reported. General recommendations are given regarding the collection of spent batteries and the installation of a recycling plant in Greece. A sensitivity analysis is carried out in order to define the most significant parameters affecting the viability of a recycling scheme. The present study proves that a possible installation of a Pb/acid batteries recycling process unit, treating 17 000 t/year (estimated total quantity) and situated in the industrial area of the greater Athens region, seems to be economically profitable. The already existing operation of small-scale battery recycling plants, common in small countries, should be discouraged as they demonstrate a rather not environmentally acceptable recycling operation

Long-term storage of spent nuclear fuel

International Nuclear Information System (INIS)

Kempe, T.F.; Martin, A.; Thorne, M.C.

1980-06-01

This report presents the results of a study on the storage of spent nuclear fuel, with particular reference to the options which would be available for long-term storage. Two reference programmes of nuclear power generation in the UK are defined and these are used as a basis for the projection of arisings of spent fuel and the storage capacity which might be needed. The characteristics of spent fuel which are relevant to long-term storage include the dimensions, materials and physical construction of the elements, their radioactive inventory and the associated decay heating as a function of time after removal from the reactor. Information on the behaviour of spent fuel in storage ponds is reviewed with particular reference to the corrosion of the cladding. The review indicates that, for long-term storage, both Magnox and AGR fuel would need to be packaged because of the high rate of cladding corrosion and the resulting radiological problems. The position on PWR fuel is less certain. Experience of dry storage is less extensive but it appears that the rate of corrosion of cladding is much lower than in water. Unit costs are discussed. Consideration is given to the radiological impact of fuel storage. (author)

Spent fuel management overview: a global perspective

International Nuclear Information System (INIS)

Bonne, A.; Crijns, M.J.; Dyck, P.H.; Fukuda, K.; Mourogov, V.M.

1999-01-01

The paper defines the main spent fuel management strategies and options, highlights the challenges for spent fuel storage and gives an overview of the regional balances of spent fuel storage capacity and spent fuel arising. The relevant IAEA activities in the area of spent fuel management are summarised. (author)

Psychological, interpersonal, and clinical factors predicting time spent on physical activity among Mexican patients with hypertension

Directory of Open Access Journals (Sweden)

Ybarra Sagarduy JL

2018-01-01

Full Text Available José Luis Ybarra Sagarduy,1 Dacia Yurima Camacho Mata,1 José Moral de la Rubia,2 Julio Alfonso Piña López,3 José Luis Masud Yunes Zárraga4 1Unit of Social Work and Human Development, Autonomous University of Tamaulipas, Ciudad Victoria, 2School of Psychology, Autonomous University of Nuevo Leon, Monterrey, 3Independent Researcher, Hermosillo, 4Institute of Health and Safety Services for State Workers, Clinic for the Study and Prevention of the Chilhood Obesity, Ciudad Victoria, Mexico Background: It is widely known that physical activity is the key to the optimal management and clinical control of hypertension.Purpose: This research was conducted to identify factors that can predict the time spent on physical activity among Mexican adults with hypertension.Methods: This cross-sectional study was conducted among 182 Mexican patients with hypertension, who completed a set of self-administered questionnaires related to personality, social support, and medical adherence and health care behaviors, body mass index, and time since the disease diagnosis. Several path analyses were performed in order to test the predictors of the study behavior.Results: Lower tolerance to frustration, more tolerance to ambiguity, more effective social support, and less time since the disease diagnosis predicted more time spent on physical activity, accounting for 13.3% of the total variance. The final model shows a good fit to the sample data (pBS =0.235, χ2/gl =1.519, Jöreskog and Sörbom’s Goodness of Fit Index =0.987, adjusted modality =0.962, Bollen’s Incremental Fit Index =0.981, Bentler-Bonett Normed Fit Index =0.946, standardized root mean square residual =0.053.Conclusion: The performance of physical activity in patients with hypertension depends on a complex set of interactions between personal, interpersonal, and clinical variables. Understanding how these factors interact might enhance the design of interdisciplinary intervention programs so

Time spent by Brazilian students in different modes of transport going to school: changes over a decade (2001-2011

Directory of Open Access Journals (Sweden)

Kelly Samara Silva

2014-11-01

Full Text Available To examine changes in the time spent in each mode of transportation used for going to school by gender and age among adolescents from Santa Catarina State, Brazil. Two school-based surveys were performed in 2001 (N = 5,028 and 2011 (N = 6,529 in high school students (15-19 years old. The mode of transportation (on foot; by bicycle; by bus; car/motorcycle and the time spent for commuting to school were assessed. Active commuting increased for short trips in both genders (male: 25.1% to 36.7%; female: 18.8% to 29.2% and in all ages (15-16 years: 21% to 32.7%; 17-19 years: 21.9% to 32.4%, and declined for longer trips in males (30.5% to 21.9% and in 15-16 years old students (25.7% to 34.7%. Car/motorcycle use has doubled for short trips in males (38.1% to 65.9% and in 17-19 years old students (37.7% to 62.7%, while the use of buses remained stable in both genders. Our findings contribute to discussions on public policy focusing on the design of safe environments to promote active commuting to schools, particularly to decrease the use of motorized transport for short trips.

Sample acceptance time criteria, electronic issue and alloimmunisation in thalassaemia.

Science.gov (United States)

Trompeter, S; Baxter, L; McBrearty, M; Zatkya, E; Porter, J

2015-12-01

To determine the safety of a 1-week acceptance criteria of sample receipt in laboratory to transfusion commencement in transfusion dependent thalassaemia with respect to alloimmunisation. To determine the safety of electronic issue of blood components in such a setting. Retrospective audit of alloimmunisation (1999-2012) and blood exposure in registered thalassaemia patients at a central London thalassaemia centre where the acceptance criteria for the group and save sample from arrival in the laboratory to the time of issue of blood for transfusion for someone who has been transfused in the last 28 days was 1 week, and there was electronic issue protocol for patients who have always had a negative antibody screen (other than temporary positivity in pregnant women receiving prophylactic anti-D or anti Le-a, Anti Le-b and Anti P1 that are no longer detectable). There were 133 patients with thalassemia variants regularly attending UCLH for review. A total of 105 patients had transfusion dependent thalassaemia (TDT) (7 E-beta thalassaemia, 98 beta thalassaemia major). Ten of the 84 patients who received their transfusions at UCLH were alloimmunised. Seven of them had been alloimmunised prior to arrival at UCLH. Only two patients developed antibodies at UCLH during this period. The prevalence of alloantibody formation of 2% in UCLH transfused patients, with presumptive incidence of 0.01 alloantibodies per 100 units or 0·001 immunisations per person per year compares favourably with other reported series and suggests that 1 week interval with appropriate electronic issue is acceptable practice. © 2015 British Blood Transfusion Society.

Evaluation of alternative spent fuel waste package concepts for a repository in Basalt

International Nuclear Information System (INIS)

Hall, G.V.B.; Nair, B.R.

1986-01-01

The United States government has established a program for the disposal of spent nuclear fuel and high-level radioactive waste. The Nuclear Waste Policy Act (NWPA) of 1982 requires the first nuclear waste repository to begin receiving high-level radioactive waste in 1998. One of the potentially acceptable sites currently being evaluated is the Hanford Site in the Pasco Basin in the state of Washington where the host rock is basalt. Under the direction of the United States Department of Energy (DOE), Rockwell International's Rockwell Hanford Operations (RHO) has initiated the Basalt Waste Isolation Project (BWIP). The BWIP must design waste packages for emplacement in the repository. As part of the BWIP waste package development program, several alternative designs were considered for the disposal of spent nuclear fuel. This paper describes the concepts that were evaluated, the criteria that was developed for judging their relative merits, and the methodology that was employed. The results of the evaluation show that a Pipe-In-Tunnel design, which uses a long carbon steel pipe for the containment barrier for multiple packages of consolidated spent fuel, has the highest rating. Other designs which had high ratings are also discussed

A study on the expulsion of iodine from spent-fuel solutions

Energy Technology Data Exchange (ETDEWEB)

Sakurai, Tsutomu; Takahashi, Akira; Ishikawa, Niroh [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan)] [and others

1995-02-01

During dissolution of spent nuclear fuels, some radioiodine remains in spent-fuel solutions. Its expulsion to dissolver off-gas is important to minimize iodine escape to the environment. In our current work, the iodine remaining in spent-fuel solutions varied from 0 to 10% after dissolution of spent PWR-fuel specimens (approximately 3 g each). The amount remaining probably was dependent upon the dissolution time required. The cause is ascribable to the increased nitrous acid concentration that results from NOx generated during dissolution. The presence of nitrous acid was confirmed spectrophotometrically in an NO-HNO{sub 3} system at 100{degrees}C. Experiments examining NOx concentration versus the quantity of iodine in a simulated spent-fuel solution indicate that iodine (I{minus}) in spent fuels is subjected to the following three reactions: (1) oxidation into I{sub 2} by nitric acid, (2) oxidation into I{sub 2} by nitrous acid arising from NOx, and (3) formation of colloidal iodine (AgI, PdI{sub 2}), the major iodine species in a spent-fuel solution. Reaction (2) competes with reaction (3) to control the quantity of iodine remaining in solution. The following two-step expulsion process to remove iodine from a spent-fuel solution was derived from these experiments: Step One - Heat spent-fuel solutions without NOx sparging. When aged colloidal iodine is present, an excess amount of iodate should be added to the solution. Step Two - Sparge the fuel solution with NOx while heating. Effect of this new method was confirmed by use of a spent PWR-fuel solution.

Lost in hospital: a qualitative interview study that explores the perceptions of NHS inpatients who spent time on clinically inappropriate hospital wards.

Science.gov (United States)

Goulding, Lucy; Adamson, Joy; Watt, Ian; Wright, John

2015-10-01

Prior research suggests that the placement of patients on clinically inappropriate hospital wards may increase the risk of experiencing patient safety issues. To explore patients' perspectives of the quality and safety of the care received during their inpatient stay on a clinically inappropriate hospital ward. Qualitative study using semi-structured interviews. Nineteen patients who had spent time on at least one clinically inappropriate ward during their hospital stay at a large NHS teaching hospital in England. Patients would prefer to be treated on the correct specialty ward, but it is generally accepted that this may not be possible. When patients are placed on inappropriate wards, they may lack a sense of belonging. Participants commented on potential failings in communication, medical staff availability, nurses' knowledge and the resources available, each of which may contribute to unsafe care. Patients generally acknowledge the need for placement on inappropriate wards due to demand for inpatient beds, but may report dissatisfaction in terms of preference and belonging. Importantly, patients recount issues resulting from this placement that may compromise their safety. Hospital managers should be encouraged to appreciate this insight and potential threat to safe practice and where possible avoid inappropriate ward transfers and admissions. Where such admissions are unavoidable, staff should take action to address the gaps in safety of care that have been identified. © 2013 John Wiley & Sons Ltd.

Determining initial enrichment, burnup, and cooling time of pressurized-water-reactor spent fuel assemblies by analyzing passive gamma spectra measured at the Clab interim-fuel storage facility in Sweden

Science.gov (United States)

Favalli, A.; Vo, D.; Grogan, B.; Jansson, P.; Liljenfeldt, H.; Mozin, V.; Schwalbach, P.; Sjöland, A.; Tobin, S. J.; Trellue, H.; Vaccaro, S.

2016-06-01

The purpose of the Next Generation Safeguards Initiative (NGSI)-Spent Fuel (SF) project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. The NGSI-SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins; (3) estimate the plutonium mass [which is also a function of the variables in (1)]; (4) estimate the decay heat; and (5) determine the reactivity of spent fuel assemblies. Since August 2013, a set of measurement campaigns has been conducted at the Central Interim Storage Facility for Spent Nuclear Fuel (Clab), in collaboration with Swedish Nuclear Fuel and Waste Management Company (SKB). One purpose of the measurement campaigns was to acquire passive gamma spectra with high-purity germanium and lanthanum bromide scintillation detectors from Pressurized Water Reactor and Boiling Water Reactor spent fuel assemblies. The absolute 137Cs count rate and the 154Eu/137Cs, 134Cs/137Cs, 106Ru/137Cs, and 144Ce/137Cs isotopic ratios were extracted; these values were used to construct corresponding model functions (which describe each measured quantity's behavior over various combinations of burnup, cooling time, and initial enrichment) and then were used to determine those same quantities in each measured spent fuel assembly. The results obtained in comparison with the operator declared values, as well as the methodology developed, are discussed in detail in the paper.

A time-motion study of cardiovascular disease risk factor screening integrated into HIV clinic visits in Swaziland.

Science.gov (United States)

Palma, Anton M; Rabkin, Miriam; Simelane, Samkelo; Gachuhi, Averie B; McNairy, Margaret L; Nuwagaba-Biribonwoha, Harriet; Bongomin, Pido; Okello, Velephi N; Bitchong, Raymond A; El-Sadr, Wafaa M

2018-03-01

Screening of modifiable cardiovascular disease (CVD) risk factors is recommended but not routinely provided for HIV-infected patients, especially in low-resource settings. Potential concerns include limited staff time and low patient acceptability, but little empirical data exists. As part of a pilot study of screening in a large urban HIV clinic in Swaziland, we conducted a time-motion study to assess the impact of screening on patient flow and HIV service delivery and exit interviews to assess patient acceptability. A convenience sample of patients ≥40 years of age attending routine HIV clinic visits was screened for hypertension, diabetes, hyperlipidemia and tobacco smoking. We observed HIV visits with and without screening and measured time spent on HIV and CVD risk factor screening activities. We compared screened and unscreened patients on total visit time and time spent receiving HIV services using Wilcoxon rank-sum tests. A separate convenience sample of screened patients participated in exit interviews to assess their satisfaction with screening. We observed 172 patient visits (122 with CVD risk factor screening and 50 without). Screening increased total visit time from a median (range) of 4 minutes (2 to 11) to 15 minutes (9 to 30) (p < 0.01). Time spent on HIV care was not affected: 4 (2 to 10) versus 4 (2 to 11) (p = 0.57). We recruited 126 patients for exit interviews, all of whom indicated that they would recommend screening to others. Provision of CVD risk factor screening more than tripled the length of routine HIV clinic visits but did not reduce the time spent on HIV services. Programme managers need to take longer visit duration into account in order to effectively integrate CVD risk factor screening and counselling into HIV programmes. © 2018 The Authors. Journal of the International AIDS Society published by John Wiley & sons Ltd on behalf of the International AIDS Society.

Economics of National Waste Terminal Storage Spent Fuel Pricing Study

International Nuclear Information System (INIS)

1978-05-01

The methodology for equitably pricing commercial nuclear spent fuel management is developed, and the results of four sample calculations are presented. The spent fuel management program analyzed places encapsulated spent fuel in bedded salt while maintaining long-term retrievability. System design was reasonable but not optimum. When required, privately-owned Away From Reactor (AFR) storage is provided and the spent fuel placed in AFR storage is eventually transported to final storage. Applicable Research and Development and Government Overhead are included. The cost of each component by year was estimated from the most recent applicable data source available. These costs were input to the pricing methodology to establish a one-time charge whose present value exactly recovered the present value of the expenditure flow. The four cases exercised were combinations of a high and a low quantity of spent fuel managed, with a single repository (venture) or a multiple repository (campaign) approach to system financial structure. The price for spent fuel management calculated ranged from 116 to 152 dollars (1978) per kilogram charged initially to the reactor. The effect of spent fuel receiving rate on price is illustrated by the fact that the extremes of price did not coincide with the cases having the extremes of undiscounted cost. These prices for spent fuel management are comparable in magnitude to other fuel cycle costs. The range of variation is small because of compensating effects, i.e., additional costs for high early deliveries (AFR and transportation) versus lower present value of future revenue for later delivery cases. The methodology contains numerous conservative assumptions, provisions for contingencies, and covers the complete set of spent fuel management expenses

Spent-fuel transport: available as needed

International Nuclear Information System (INIS)

Macklin, L.

1976-01-01

As a result of the general uncertainty as to when commercial reprocessing will actually take place in the United States (U.S.) and the long lead times now required before bringing a spent-fuel cask system in operation, it appears that serious problems can arise by 1979-1980 in cask capacity availability. Compounding the uncertainty with respect to cask capacity availability is the position taken by some of the U.S. railroad systems and some state and local governmental agencies in imposing restraints in the movement of spent fuel. By utility companies taking risk in committing to casks in advance of the actual requirement dates and by cask suppliers assuming the risks of licensing, costs, and delivery schedules, this potential bottleneck could be minimized

Storage of LWR spent fuel in air. Volume 3, Results from exposure of spent fuel to fluorine-contaminated air

Energy Technology Data Exchange (ETDEWEB)

Cunningham, M.E.; Thomas, L.E.

1995-06-01

The Behavior of Spent Fuel in Storage (BSFS) Project has conducted research to develop data on spent nuclear fuel (irradiated U0{sub 2}) that could be used to support design, licensing, and operation of dry storage installations. Test Series B conducted by the BSFS Project was designed as a long-term study of the oxidation of spent fuel exposed to air. It was discovered after the exposures were completed in September 1990 that the test specimens had been exposed to an atmosphere of bottled air contaminated with an unknown quantity of fluorine. This exposure resulted in the test specimens reacting with both the oxygen and the fluorine in the oven atmospheres. The apparent source of the fluorine was gamma radiation-induced chemical decomposition of the fluoro-elastomer gaskets used to seal the oven doors. This chemical decomposition apparently released hydrofluoric acid (HF) vapor into the oven atmospheres. Because the Test Series B specimens were exposed to a fluorine-contaminated oven atmosphere and reacted with the fluorine, it is recommended that the Test Series B data not be used to develop time-temperature limits for exposure of spent nuclear fuel to air. This report has been prepared to document Test Series B and present the collected data and observations.

Storage of LWR spent fuel in air. Volume 3, Results from exposure of spent fuel to fluorine-contaminated air

International Nuclear Information System (INIS)

Cunningham, M.E.; Thomas, L.E.

1995-06-01

The Behavior of Spent Fuel in Storage (BSFS) Project has conducted research to develop data on spent nuclear fuel (irradiated U0 2 ) that could be used to support design, licensing, and operation of dry storage installations. Test Series B conducted by the BSFS Project was designed as a long-term study of the oxidation of spent fuel exposed to air. It was discovered after the exposures were completed in September 1990 that the test specimens had been exposed to an atmosphere of bottled air contaminated with an unknown quantity of fluorine. This exposure resulted in the test specimens reacting with both the oxygen and the fluorine in the oven atmospheres. The apparent source of the fluorine was gamma radiation-induced chemical decomposition of the fluoro-elastomer gaskets used to seal the oven doors. This chemical decomposition apparently released hydrofluoric acid (HF) vapor into the oven atmospheres. Because the Test Series B specimens were exposed to a fluorine-contaminated oven atmosphere and reacted with the fluorine, it is recommended that the Test Series B data not be used to develop time-temperature limits for exposure of spent nuclear fuel to air. This report has been prepared to document Test Series B and present the collected data and observations

Objectively measured time spent sedentary is associated with insulin resistance independent of overall and central body fat in 9- to 10-year-old Portuguese children

DEFF Research Database (Denmark)

Sardinha, Luis B; Andersen, Lars Bo; Anderssen, Sigmund A

2007-01-01

OBJECTIVE: We examined the independent relationships between objectively measured physical activity and insulin resistance in Portuguese children. RESEARCH DESIGN AND METHODS: This is a school-based, cross-sectional study in 147 randomly selected girls (aged 9.8 +/- 0.3 years; 27.8 +/- 9.3% body...... fat) and 161 boys (aged 9.8 +/- 0.3 years; 22.0 +/- 9.2% body fat). Physical activity was assessed by the Actigraph accelerometer for 4 days and summarized as time spent sedentary (accelerometer counts ... (beta-coefficient = 0.001 [95% CI 0.0002-0.002]; P = 0.013). Time spent in moderate- and vigorous-intensity physical activity (-0.002 [-0.003 to -0.001]; P = 0.0009) and overall physical activity (-0.001 [-0.008 to 0.003]; P

Notice of inquiry on waste acceptance issues: Response summary

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

On May 25, 1994, the Department of Energy published a Notice of Inquiry on Waste Acceptance Issues in the Federal Register. Through this Notice of Inquiry, the Department sought to implement the Secretary`s initiative to explore with affected parties various options and methods for sharing the costs related to the financial burden associated with continued on-site storage by eliciting the views of affected parties on: (1) The Department`s preliminary view that it does not have a statutory obligation to begin accepting spent nuclear fuel in 1998 in the absence of an operational repository or other suitable storage facility constructed under the Nuclear Waste Policy Act of 1982, as amended; (2) The need for an interim, away-from-reactor storage facility prior to repository operations; and (3) Options for offsetting, through the Nuclear Waste Fund, a portion of the financial burden that may be incurred by utilities in continuing to store spent nuclear fuel at reactor sites beyond 1998. The Department received a total of 1,111 responses representing 1,476 signatories to this Notice of Inquiry. The responses included submittals from utilities (38 responses); public utility/service commissions and utility regulators (26 responses); Federal, state, and local governments, agencies, and representatives (23 responses); industry and companies (30 responses); public interest groups and other organizations (19 responses); and members of the general public (975 responses).

Notice of inquiry on waste acceptance issues: Response summary

International Nuclear Information System (INIS)

1995-03-01

On May 25, 1994, the Department of Energy published a Notice of Inquiry on Waste Acceptance Issues in the Federal Register. Through this Notice of Inquiry, the Department sought to implement the Secretary's initiative to explore with affected parties various options and methods for sharing the costs related to the financial burden associated with continued on-site storage by eliciting the views of affected parties on: (1) The Department's preliminary view that it does not have a statutory obligation to begin accepting spent nuclear fuel in 1998 in the absence of an operational repository or other suitable storage facility constructed under the Nuclear Waste Policy Act of 1982, as amended; (2) The need for an interim, away-from-reactor storage facility prior to repository operations; and (3) Options for offsetting, through the Nuclear Waste Fund, a portion of the financial burden that may be incurred by utilities in continuing to store spent nuclear fuel at reactor sites beyond 1998. The Department received a total of 1,111 responses representing 1,476 signatories to this Notice of Inquiry. The responses included submittals from utilities (38 responses); public utility/service commissions and utility regulators (26 responses); Federal, state, and local governments, agencies, and representatives (23 responses); industry and companies (30 responses); public interest groups and other organizations (19 responses); and members of the general public (975 responses)

Impact of pre-drying and frying time on physical properties and sensorial acceptability of fried potato chips.

Science.gov (United States)

Cruz, Giorman; Cruz-Tirado, J P; Delgado, Kevin; Guzman, Yorvin; Castro, Franco; Rojas, Meliza Lindsay; Linares, Guillermo

2018-01-01

In this work the effects of pre-drying and frying time on colour, oil, texture and sensorial acceptability (overall liking) of potato chips were evaluated. Potato chips were pre-dried for 0, 10, 20 and 30 min at 60 °C and fried in soybean oil at 190 °C for 60, 70 and 80 s. The colour parameters (L*, a* and b*) increased or decreased depending on the pre-drying and frying time. Hardness increased as the pre-drying and frying time increased. On the other hand, the water initially removed by pre-drying decrease the gradient of mass transfer (water-oil). The oil content reduced to (about 21%) in pre-dried samples when compared to control sample. Finally, sensorial evaluation showed that samples without pre-drying and/or fried for very short or very long times had low acceptance levels. The pre-drying and frying times influenced the colour, texture, water and oil content, and resulted into fried potato chips with better acceptance scores.

Demonstration of a transportable storage system for spent nuclear fuel

International Nuclear Information System (INIS)

Shetler, J.R.; Miller, K.R.; Jones, R.E.

1993-01-01

The purpose of this paper is to discuss the joint demonstration project between the Sacramento Municipal Utility District (SMUD) and the US Department of Energy (DOE) regarding the use of a transportable storage system for the long-term storage and subsequent transport of spent nuclear fuel. SMUD's Rancho Seco nuclear generating station was shut down permanently in June 1989. After the shutdown, SMUD began planning the decommissioning process, including the disposition of the spent nuclear fuel. Concurrently, Congress had directed the Secretary of Energy to develop a plan for the use of dual-purpose casks. Licensing and demonstrating a dual-purpose cask, or transportable storage system, would be a step toward achieving Congress's goal of demonstrating a technology that can be used to minimize the handling of spent nuclear fuel from the time the fuel is permanently removed from the reactor through to its ultimate disposal at a DOE facility. For SMUD, using a transportable storage system at the Rancho Seco Independent Spent-Fuel Storage Installation supports the goal of abandoning Rancho Seco's spent-fuel pool as decommissioning proceeds

Mechanical and thermomechanical calculations related to the storage of spent nuclear-fuel assemblies in granite

International Nuclear Information System (INIS)

Butkovich, T.R.

1980-05-01

A generic test of the geologic storage of spent-fuel assemblies is being made at Nevada Test Site. The spent-fuel assemblies were emplaced at a depth of 420 m (1370 ft) below the surface in a typical granite and will be retrieved at a later time. The early time, close-in thermal history of this type of repository is being simulated with spent-fuel and electrically heated canisters in a central drift, with auxiliary heaters in two parallel side drifts. Prior to emplacement of the spent-fuel canisters, preliminary calculations were made using a pair of existing finite-element codes, ADINA and ADINAT

Spent fuel treatment in Japan

International Nuclear Information System (INIS)

Takahashi, K.

1999-01-01

In Japan, 52 nuclear power reactors are operating with a total power generation capacity of 45 GWe. The cumulative amount of spent fuel arising, as of March 1998, is about 14,700 W. Spent fuel is reprocessed and recovered nuclear materials are to be recycled in LWRs and FBRs. Pu utilization in LWRs will commence in 1999. In January 1997, short-term policy measures were announced by the Atomic Energy Commission, which addressed promotion of the reprocessing programme in Rokkasho, plutonium utilization in LWRs, spent fuel management, back-end measures and FBR development. With regard to the spent fuel management, the policy measures included expansion of spent fuel storage capacity at reactor sites and a study on spent fuel storage away-from-reactor sites, considering the increasing amount of spent fuel arising. Valuable experience was been accumulated at the Tokai Reprocessing Plant (TRP), from the start of hot operation in 1977 up to now. The role of the TRP will be changed from an operation-oriented to a more R and D oriented facility, when PNC is reorganized into the new organization JNC. The Rokkasho reprocessing plant is under construction and is expected to commence operation in 2003. R and D of future recycling technologies is also continued for the establishment of a nuclear fuel cycle based on FBRs and LWRs. (author)

Centralized disassembly and packaging of spent fuel in the DOE spent fuel management system

International Nuclear Information System (INIS)

Johnson, E.R.

1986-01-01

In October 1984, E.R. Johnson Associates, Inc. (JAI) initiated a study of the prospective use of a centralized facility for the disassembly and packaging of spent fuel to support the various elements of the US Dept. of Energy (DOE) spent fuel management system, including facilities for monitored retrievable storage (MRS) and repositories. It was DOE's original plan to receive spent fuel at each repository where it would be disassembled and packaged (overpacked) for disposal purposes. Subsequently, DOE considered the prospective use of MRS of spent fuel as an option for providing safe and reliable management of spent fuel. This study was designed to consider possible advantages of the use of centralized facilities for disassembly and packaging of spent fuel at whose location storage facilities could be added as required. The study was divided into three principal technical tasks that covered: (a) development of requirements and criteria for the central disassembly and packaging facility and associated systems. (2) Development of conceptual designs for the central disassembly and packaging facility and associated systems. (3) Estimation of capital and operating costs involved for all system facilities and determination of life cycle costs for various scenarios of operation - for comparison with the reference system

Final environmental impact statement: US Spent Fuel Policy. Charge for spent fuel storage

International Nuclear Information System (INIS)

1980-05-01

The United States Government policy relating to nuclear fuel reprocessing, which was announced by President Carter on April 7, 1977, provides for an indefinite deferral of reprocessing, and thus commits light water reactor (LWR) plants to a once-through fuel cycle during that indefinite period. In a subsequent action implementing that policy, the Department of Energy (DOE) on October 18, 1977 announced a spent fuel policy which would enable domestic, and on a selective basis, foreign utilities to deliver spent fuel to the US Government for interim storage and final geologic disposal, and pay the Government a fee for such services. This volume addresses itself to whether the fee charged for these services, by its level or its structure, would have any effect on the environmental impacts of implementing the Spent Fuel Policy itself. This volume thus analyzes the fee and various alternatives to determine the interaction between the fee and the degree of participation by domestic utilities and foreign countries in the proposed spent fuel program for implementing the Spent Fuel Policy. It also analyzes the effect, if any, of the fee on the growth of nuclear power

Manipulator for fuel assemblies in a spent fuel pool, especially for a LMFBR

International Nuclear Information System (INIS)

Dalmas, R.

1988-01-01

The spent fuel manipulator has - a travelling crane moving longitudinally: - a carriage moving on the travelling crane in a direction perpendicular to its motion so that the carriage is positioned over each assembly, - a telescopic rod carried by the carriage and terminating in a vertically mobile grapple, - a tubular shielded hood on the carriage extending downwards to house the rod, grapple and fuel assembly and maintaining a biologically acceptable level of radiation above the surface of the pool [fr

Spent Fuel Transfer to Dry Storage Using Unattended Monitoring System

International Nuclear Information System (INIS)

Park, Jae Hwan; Park, Soo Jin

2009-01-01

There are 4 CANDU reactors at Wolsung site together with a spent fuel dry storage associated with unit 1. These CANDU reactors, classified as On-Load Reactor (OLR) for Safeguards application, change 16- 24 fuel bundles with fresh fuel in everyday. Especially, the spent fuel bundles are transferred from spent fuel bays to dry storage throughout a year because of the insufficient capacity of spent fuel pond. Safeguards inspectors verify the spent fuel transfer to meet safeguards purposes according to the safeguards criteria by means of inspector's presence during the transfer campaign. For the verification, 60-80 person-days of inspection (PDIs) are needed during approximately 3 months for each unit. In order to reduce the inspection effort and operators' burden, an Unattended Monitoring System (UMS) was designed and developed by the IAEA for the verification of spent fuel bundles transfers from wet storage to dry storage. Based on the enhanced cooperation of CANDU reactors between the ROK and the IAEA, the IAEA installed the UMS at Wolsung unit 2 in January 2005 at first. After some field trials during the transfer campaign, this system is being replaced the traditional human inspection since September 1, 2006 combined with a Short Notice Inspection (SNI) and a near-real time Mailbox Declaration

Spent-Fuel Test - Climax: An evaluation of the technical feasibility of geologic storage of spent nuclear fuel in granite: Executive summary of final results

International Nuclear Information System (INIS)

Patrick, W.C.

1986-01-01

This summary volume outlines results that are covered in more detail in the final report of the Spent-Fuel Test - Climate project. The project was conducted between 1978 and 1983 in the granitic Climax stock at the Nevada Test Site. Results indicate that spent fuel can be safely stored for periods of years in this host medium and that nuclear waste so emplaced can be safely retrieved. We also evaluated the effects of heat and radiation (alone and in combination) on emplacement canisters and the surrounding rock mass. Storage of the spent-fuel affected the surrounding rock mass in measurable ways, but did not threaten the stability or safety of the facility at any time

National Option of China's Nuclear Energy Systems for Spent Fuel Management

Energy Technology Data Exchange (ETDEWEB)

Gao, R.X. [University of Science and Technology, Daejeon (Korea, Republic of); Ko, W. I.; Lee, S. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Along with safety concerns, these long standing environmental challenges are the major factors influencing the public acceptance of nuclear power. Although nuclear power plays an important role in reducing carbon emissions from energy generation, this could not fully prove it as a sustainable energy source unless we find a consensus approach to treat the nuclear wastes. There are currently no countries that have completed a whole nuclear fuel cycle, and the relative comparison of the reprocessing spent fuel options versus direct disposal option is always a controversial issue. Without exception, nowadays, China is implementing many R and D projects on spent fuel management to find a long-term solution for nuclear fuel cycle system transition, such as deep geological repositories for High Level Waste (HLW), Pu Reduction by Solvent Extraction (PUREX) technology, and fast reactor recycling Mixed U-Pu Oxide (MOX) fuels, etc. This paper integrates the current nation's projects of back-end fuel cycle, analyzes the consequences of potential successes, failures and delays in the project development to future nuclear fuel cycle transition up to 2100. We compared the dynamic results of four scenarios and then assessed relative impact on spent fuel management. The result revealed that the fuel cycle transition of reprocessing and recycling of spent fuel would bring advantages to overall nuclear systems by reducing high level waste inventory, saving natural uranium resources, and reducing plutonium management risk.

Spent fuel receipt and lag storage facility for the spent fuel handling and packaging program

International Nuclear Information System (INIS)

Black, J.E.; King, F.D.

1979-01-01

Savannah River Laboratory (SRL) is participating in the Spent Fuel Handling and Packaging Program for retrievable, near-surface storage of spent light water reactor (LWR) fuel. One of SRL's responsibilities is to provide a technical description of the wet fuel receipt and lag storage part of the Spent Fuel Handling and Packaging (SFHP) facility. This document is the required technical description

MCO combustible gas management leak test acceptance criteria; TOPICAL

International Nuclear Information System (INIS)

SHERRELL, D.L.

1999-01-01

Existing leak test acceptance criteria for mechanically sealed and weld sealed multi-canister overpacks (MCO) were evaluated to ensure that MCOs can be handled and stored in stagnant air without compromising the Spent Nuclear Fuel Project's overall strategy to prevent accumulation of combustible gas mixtures within MCO's or within their surroundings. The document concludes that the integrated leak test acceptance criteria for mechanically sealed and weld sealed MCOs (1 x 10(sup -5) std cc/sec and 1 x 10(sup -7) std cc/sec, respectively) are adequate to meet all current and foreseeable needs of the project, including capability to demonstrate compliance with the NFPA 60 Paragraph 3-3 requirement to maintain hydrogen concentrations[within the air atmosphere CSB tubes] t or below 1 vol% (i.e., at or below 25% of the LFL)

Costing of spent nuclear fuel storage

International Nuclear Information System (INIS)

2009-01-01

This report deals with economic analysis and cost estimation, based on exploration of relevant issues, including a survey of analytical tools for assessment and updated information on the market and financial issues associated with spent fuel storage. The development of new storage technologies and changes in some of the circumstances affecting the costs of spent fuel storage are also incorporated. This report aims to provide comprehensive information on spent fuel storage costs to engineers and nuclear professionals as well as other stakeholders in the nuclear industry. This report is meant to provide informative guidance on economic aspects involved in selecting a spent fuel storage system, including basic methods of analysis and cost data for project evaluation and comparison of storage options, together with financial and business aspects associated with spent fuel storage. After the review of technical options for spent fuel storage in Section 2, cost categories and components involved in the lifecycle of a storage facility are identified in Section 3 and factors affecting costs of spent fuel storage are then reviewed in the Section 4. Methods for cost estimation and analysis are introduced in Section 5, and other financial and business aspects associated with spent fuel storage are discussed in Section 6.

A Critical Review of Practice of Equating the Reactivity of Spent Fuel to Fresh Fuel in Burnup Credit Criticality Safety Analyses for PWR Spent Fuel Pool Storage

International Nuclear Information System (INIS)

Wagner, J.C.; Parks, C.V.

2000-01-01

This research examines the practice of equating the reactivity of spent fuel to that of fresh fuel for the purpose of performing burnup credit criticality safety analyses for PWR spent fuel pool (SFP) storage conditions. The investigation consists of comparing k inf estimates based on reactivity equivalent fresh fuel enrichment (REFFE) to k inf estimates using the actual spent fuel isotopics. Analyses of selected storage configurations common in PWR SFPs show that this practice yields nonconservative results (on the order of a few tenths of a percent) in configurations in which the spent fuel is adjacent to higher-reactivity assemblies (e.g., fresh or lower-burned assemblies) and yields conservative results in configurations in which spent fuel is adjacent to lower-reactivity assemblies (e.g., higher-burned fuel or empty cells). When the REFFE is determined based on unborated water moderation, analyses for storage conditions with soluble boron present reveal significant nonconservative results associated with the use of the REFFE. This observation is considered to be important, especially considering the recent allowance of credit for soluble boron up to 5% in reactivity. Finally, it is shown that the practice of equating the reactivity of spent fuel to fresh fuel is acceptable, provided the conditions for which the REFFE was determined remain unchanged. Determination of the REFFE for a reference configuration and subsequent use of the REFFE for different configurations violates the basis used for the determination of the REFFE and, thus, may lead to inaccurate, and possibly, nonconservative estimates of reactivity. A significant concentration (approx. 2000 ppm) of soluble boron is typically (but not necessarily required to be) present in PWR SFPs, of which only a portion (le 500 ppm) may be credited in safety analyses. Thus, a large subcritical margin currently exists that more than accounts for errors or uncertainties associated with the use of the REFFE

Determining initial enrichment, burnup, and cooling time of pressurized-water-reactor spent fuel assemblies by analyzing passive gamma spectra measured at the Clab interim-fuel storage facility in Sweden

Energy Technology Data Exchange (ETDEWEB)

Favalli, A., E-mail: afavalli@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM (United States); Vo, D. [Los Alamos National Laboratory, Los Alamos, NM (United States); Grogan, B. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Jansson, P. [Uppsala University, Uppsala (Sweden); Liljenfeldt, H. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Mozin, V. [Lawrence Livermore National Laboratory, Livermore, CA (United States); Schwalbach, P. [European Commission, DG Energy, Euratom Safeguards Luxemburg, Luxemburg (Luxembourg); Sjöland, A. [Swedish Nuclear Fuel and Waste Management Company, Stockholm (Sweden); Tobin, S.J.; Trellue, H. [Los Alamos National Laboratory, Los Alamos, NM (United States); Vaccaro, S. [European Commission, DG Energy, Euratom Safeguards Luxemburg, Luxemburg (Luxembourg)

2016-06-01

The purpose of the Next Generation Safeguards Initiative (NGSI)–Spent Fuel (SF) project is to strengthen the technical toolkit of safeguards inspectors and/or other interested parties. The NGSI–SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins; (3) estimate the plutonium mass [which is also a function of the variables in (1)]; (4) estimate the decay heat; and (5) determine the reactivity of spent fuel assemblies. Since August 2013, a set of measurement campaigns has been conducted at the Central Interim Storage Facility for Spent Nuclear Fuel (Clab), in collaboration with Swedish Nuclear Fuel and Waste Management Company (SKB). One purpose of the measurement campaigns was to acquire passive gamma spectra with high-purity germanium and lanthanum bromide scintillation detectors from Pressurized Water Reactor and Boiling Water Reactor spent fuel assemblies. The absolute {sup 137}Cs count rate and the {sup 154}Eu/{sup 137}Cs, {sup 134}Cs/{sup 137}Cs, {sup 106}Ru/{sup 137}Cs, and {sup 144}Ce/{sup 137}Cs isotopic ratios were extracted; these values were used to construct corresponding model functions (which describe each measured quantity’s behavior over various combinations of burnup, cooling time, and initial enrichment) and then were used to determine those same quantities in each measured spent fuel assembly. The results obtained in comparison with the operator declared values, as well as the methodology developed, are discussed in detail in the paper.

Status of work at PNL supporting dry storage of spent fuel

International Nuclear Information System (INIS)

Cunningham, M.E.; McKinnon, M.A.; Michener, T.E.; Thomas, L.E.; Thornhill, C.K.

1992-01-01

Three projects related to dry storage of light-water reactor spent fuel are being conducted at Pacific Northwest Laboratory. Performance testing of six dry storage systems (four metal casks and two concrete storage systems) has been completed and results compiled. Two computer codes for predicting spent fuel and storage system thermal performance, COBRA-SFS and HYDRA-II, have been developed and have been reviewed by the US Nuclear Regulatory Commission. Air oxidation testing of spent fuel was conducted from 1984 through 1990 to obtain data to support recommendations of temperature-time limits for air dry storage for periods up to 40 years

Radiometric characterisation supports, burnup credit, safeguards and radionuclide inventory determination for spent fuel transport, storage and disposal

International Nuclear Information System (INIS)

Chesterman, A.S.; Clapham, M.J.; Gardner, N.

1999-01-01

Spent nuclear fuel characterisation measurements play an essential role in a range of fuel handling activities. In particular, they are necessary to support the application of burnup credit to the transport of spent fuel, to detect diversion of safeguarded nuclear material and to determine the radionuclide inventory of materials destined for final disposal. To apply measurements to these activities the measurement procedures need to be approved by the relevant regulatory bodies. Often key to the measurement procedures is the method of instrument system calibration and what a priori data is acceptable to aid the measurement process. Discussion of these, pertinent to the three areas of application mentioned above, is presented with suggestions of alternative approaches where considered appropriate. (author)

Considerations Regarding ROK Spent Nuclear Fuel Management Options

International Nuclear Information System (INIS)

Braun, Chaim; Forrest, Robert

2013-01-01

In this paper we discuss spent fuel management options in the Republic of Korea (ROK) from two interrelated perspectives: Centralized dry cask storage and spent fuel pyroprocessing and burning in sodium fast reactors (SFRs). We argue that the ROK will run out of space for at-reactors spent fuel storage by about the year 2030 and will thus need to transition centralized dry cask storage. Pyroprocessing plant capacity, even if approved and successfully licensed and constructed by that time, will not suffice to handle all the spent fuel discharged annually. Hence centralized dry cask storage will be required even if the pyroprocessing option is successfully developed by 2030. Pyroprocessing is but an enabling technology on the path leading to fissile material recycling and burning in future SFRs. In this regard we discuss two SFR options under development in the U. S.: the Super Prism and the Travelling Wave Reactor (TWR). We note that the U. S. is further along in reactor development than the ROK. The ROK though has acquired more experience, recently in investigating fuel recycling options for SFRs. We thus call for two complementary joint R and D project to be conducted by U. S. and ROK scientists. One leading to the development of a demonstration centralized away-from-reactors spent fuel storage facility. The other involve further R and D on a combined SFR-fuel cycle complex based on the reactor and fuel cycle options discussed in the paper

Spent fuel test. Climax data acquisition system integration report

International Nuclear Information System (INIS)

Nyholm, R.A.; Brough, W.G.; Rector, N.L.

1982-06-01

The Spent Fuel Test - Climax (SFT-C) is a test of the retrievable, deep geologic storage of commercially generated, spent nuclear reactor fuel in granitic rock. Eleven spent fuel assemblies, together with 6 electrical simulators and 20 guard heaters, are emplaced 420 m below the surface in the Climax granite at the Nevada Test Site. On June 2, 1978, Lawrence Livermore National Laboratory (LLNL) secured funding for the SFT-C, and completed spent fuel emplacement May 28, 1980. This multi-year duration test is located in a remote area and is unattended much of the time. An extensive array of radiological safety and geotechnical instrumentation is deployed to monitor the test performance. A dual minicomputer-based data acquisition system collects and processes data from more than 900 analog instruments. This report documents the design and functions of the hardware and software elements of the Data Acquisition System and describes the supporting facilities which include environmental enclosures, heating/air-conditioning/humidity systems, power distribution systems, fire suppression systems, remote terminal stations, telephone/modem communications, and workshop areas. 9 figures

Spent Fuel Test - Climax data acquisition system operations manual

International Nuclear Information System (INIS)

Nyholm, R.A.

1983-01-01

The Spent Fuel Test-Climax (SFT-C) is a test of the retrievable, deep geologic storage of commercially generated, spent nuclear reactor fuel in granite rock. Eleven spent fuel assemblies, together with 6 electrical simulators and 20 guard heaters, are emplaced 420 m below the surface in the Climax granite at the US Department of Energy Nevada Test Site. On June 2, 1978, Lawrence Livermore National Laboratory (LLNL) secured funding for the SFT-C, and completed spent fuel emplacement May 28, 1980. The multi-year duration test is located in a remote area and is unattended much of the time. An extensive array of radiological safety and geotechnical instrumentation is deployed to monitor the test performance. A dual minicomputer-based data acquisition system (DAS) collects and processes data from more than 900 analog instruments. This report documents the software element of the LLNL developed SFT-C Data Acquisition System. It defines the operating system and hardware interface configurations, the special applications software and data structures, and support software

Spent fuel heatup following loss of water during storage

International Nuclear Information System (INIS)

Benjamin, A.S.; McCloskey, D.J.; Powers, D.A.; Dupree, S.A.

1979-03-01

An analysis of spent fuel heatup following a hypothetical accident involving drainage of the storage pool is presented. Computations based upon a new computer code called SFUEL have been performed to assess the effect of decay time, fuel element design, storage rack design, packing density, room ventilation, drainage level, and other variables on the heatup characteristics of the spent fuel and to predict the conditions under which clad failure will occur. Possible storage pool design modifications and/or onsite emergency action have also been considered

Rock cavern storage of spent fuel

Energy Technology Data Exchange (ETDEWEB)

Cho, Won Jin; Kim, Kyung Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kwon, Sang Ki [Inha University, Incheon (Korea, Republic of)

2015-12-15

The rock cavern storage for spent fuel has been assessed to apply in Korea with reviewing the state of the art of the technologies for surface storage and rock cavern storage of spent fuel. The technical feasibility and economic aspects of the rock cavern storage of spent fuel were also analyzed. A considerable area of flat land isolated from the exterior are needed to meet the requirement for the site of the surface storage facilities. It may, however, not be easy to secure such areas in the mountainous region of Korea. Instead, the spent fuel storage facilities constructed in the rock cavern moderate their demands for the suitable site. As a result, the rock cavern storage is a promising alternative for the storage of spent fuel in the aspect of natural and social environments. The rock cavern storage of spent fuel has several advantages compared with the surface storage, and there is no significant difference on the viewpoint of economy between the two alternatives. In addition, no great technical difficulties are present to apply the rock cavern storage technologies to the storage of domestic spent fuel.

The cost of spent fuel storage

Energy Technology Data Exchange (ETDEWEB)

Ramirez S, J. R.; Palacios H, J. C.; Badillo, V.; Alonso, G., E-mail: ramon.ramirez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2011-11-15

Spent fuel is one of the most important issues in the nuclear industry, currently spent fuel management is been cause of great amount of research, investments, constructing repositories or constructing the necessary facilities to reprocess the fuel, and later to recycle the plutonium recovered in thermal reactors. What is the best solution?, or What is the best technology for an specific solution? Many countries have deferred the decision on selecting an option, while others works actively constructing repositories and others implementing the reprocessing facilities to recycle the plutonium obtained from nuclear spent fuel. In Mexico the nuclear power is limited to two reactors BWR type and medium size. So the nuclear spent fuel discharged has been accommodated at reactor's spent fuel pools. Originally these pools have enough capacity to accommodate spent fuel for the 40 years of designed plant operation. However currently, the plants are under a process for extended power up-rate to 20% of original power and also there are plans to extended operational life for 20 more years. Under these conditions there will not be enough room for spent fuel in the pools. (Author)

Dry spent fuel storage licensing

International Nuclear Information System (INIS)

Sturz, F.C.

1995-01-01

In the US, at-reactor-site dry spent fuel storage in independent spent fuel storage installations (ISFSI) has become the principal option for utilities needing storage capacity outside of the reactor spent fuel pools. Delays in the geologic repository operational date at or beyond 2010, and the increasing uncertainty of the US Department of Energy's (DOE) being able to site and license a Monitored Retrievable Storage (MRS) facility by 1998 make at-reactor-site dry storage of spent nuclear fuel increasingly desirable to utilities and DOE to meet the need for additional spent fuel storage capacity until disposal, in a repository, is available. The past year has been another busy year for dry spent fuel storage licensing. The licensing staff has been reviewing 7 applications and 12 amendment requests, as well as participating in inspection-related activities. The authors have licensed, on a site-specific basis, a variety of dry technologies (cask, module, and vault). By using certified designs, site-specific licensing is no longer required. Another new cask has been certified. They have received one new application for cask certification and two amendments to a certified cask design. As they stand on the brink of receiving multiple applications from DOE for the MPC, they are preparing to meet the needs of this national program. With the range of technical and licensing options available to utilities, the authors believe that utilities can meet their need for additional spent fuel storage capacity for essentially all reactor sites through the next decade

Development of spent fuel remote handling technology

International Nuclear Information System (INIS)

Yoon, Ji Sup; Park, B. S.; Park, Y. S.; Oh, S. C.; Kim, S. H.; Cho, M. W.; Hong, D. H.

1997-12-01

Since the nation's policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Nuclear spent fuel dry storage in the EWA reactor shaft

International Nuclear Information System (INIS)

Mieleszczenko, W.; Moldysz, A.; Hryczuk, A.; Matysiak, T.

2001-01-01

The EWA reactor was in operation from 1958 until February 1995. Then it was subjected to the decommissioning procedure. Resulting from a prolonged operation of Polish research reactors a substantial amount of nuclear spent fuel of various types, enrichment and degree of burnup have been accumulated. The technology of storage of spent nuclear fuel foresees the two stages of wet storing in a water pool (deferral period from tens to several dozens years) and dry storing (deferral period from 50 to 80 years). In our case the deferral time in the water environment is pretty significant (the oldest fuel elements have been stored in water for more than 40 years). Though the state of stored fuel elements is satisfactory, there is a real need for changing the storage conditions of spent fuel. The paper is covering the description of philosophy and conceptual design for construction of the spent fuel dry storage in the decommissioned EWA reactor shaft. (author)

Allowable spent LWR fuel storage temperatures in inert gases, nitrogen, and air

International Nuclear Information System (INIS)

Gilbert, E.R.; Cunningham, M.E.; Simonen, E.P.; Thomas, L.E.; Campbell, T.K.; Barnhart, D.M.

1990-01-01

Spent fuel in inert dry storage is now a reality in the US; recommended maximum temperature-time conditions are specified in an IBM PC-compatible code. However, spent fuel cannot yet be stored in air because the data and theory needed for predicting allowable temperatures are still being developed. Tests to determine the behavior of spent UO 2 fragments and breached rod specimens in air are providing data that will be used to determine the temperatures that can be allowed for fuel stored in air. 13 refs., 5 figs

The Influence of Instructional Climates on Time Spent in Management Tasks and Physical Activity of 2nd-Grade Students during Physical Education

Science.gov (United States)

Logan, Samuel W.; Robinson, Leah E.; Webster, E. Kipling; Rudisill, Mary E.

2015-01-01

The purpose of this study is to determine the effect of two physical education (PE) instructional climates (mastery, performance) on the percentage of time students spent in a) moderate-to-vigorous physical activity (MVPA) and b) management tasks during PE in 2nd-grade students. Forty-eight 2nd graders (mastery, n = 23; performance, n = 25)…

Possible application of brewer’s spent grain in biotechnology

Directory of Open Access Journals (Sweden)

Pejin Jelena D.

2013-01-01

Full Text Available Brewer’s spent grain is the major by-product in beer production. It is produced in large quantities (20 kg per 100 liters of produced beer throughout the year at a low cost or no cost, and due to its high protein and carbohydrates content it can be used as a raw material in biotechnology. Biotechnological processes based on renewable agro-industrial by-products have ecological (zero CO2 emission, eco-friendly by-products and economical (cheap raw materials and reduction of storage costs advantages. The use of brewer’s spent grain is still limited, being basically used as animal feed. Researchers are trying to improve the application of brewer’s spent grain by finding alternative uses apart from the current general use as an animal feed. Its possible applications are in human nutrition, as a raw material in biotechnology, energy production, charcoal production, paper manufacture, as a brick component, and adsorbent. In biotechnology brewer’s spent grain could be used as a substrate for cultivation of microorganisms and enzyme production, additive of yeast carrier in beer fermentation, raw material in production of lactic acid, bioethanol, biogas, phenolic acids, xylitol, and pullulan. Some possible applications for brewer’s spent grain are described in this article including pre-treatment conditions (different procedures for polysaccharides, hemicelluloses, and cellulose hydrolysis, working microorganisms, fermentation parameters and obtained yields. The chemical composition of brewer’s spent grain varies according to barley variety, harvesting time, malting and mashing conditions, and a quality and type of unmalted raw material used in beer production. Brewer’s spent grain is lignocellulosic material rich in protein and fibre, which account for approximately 20 and 70% of its composition, respectively.

LSDS Development for Isotopic Fissile Assay in Spent Fuel

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Deok; Park, Chang Je; Park, Geun Il; Lee, Jung Won; Song, Kee Chan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2011-07-01

As an option to reduce a spent fuel and reuse an existing fissile material in spent fuel, sodium fast reactor SFR program linked with pyro-processing is under development in KAERI. A uranium-TRU mixture through a pyro-process is used to fabricate SFR fuel. An assay of isotopic fissile content plays an important role in an optimum design of storage site and reuse of fissile materials of spent fuel. Lead slowing down spectrometer LSDS is being developed in KAERI to analyze isotopic fissile material content. LSDS has several features: direct fissile assay, near real time fissile assay, no influence from radiation background, fissile isotopic assay and applicable to spent fuel and recycled fuel. Based on the designed geometry, neutron energy resolution was investigated. The neutron energy spectrum was analyzed as well. Spent fuel emits large number of neutrons by spontaneous fission. Neutron generator must overcome the neutron background to get the pure fission signals from fissile materials. Neutron generator is planned to have compact system with one section electron linac which is easy maintenance, less cost and high neutron yield. The LSD has the power to resolve the fission characteristics from each fissile material. This feature can analyze the content of isotopic fissile. From 1keV to 0.1eV energy range, the energy resolution is enough to get the individual fissile fission signatures. The dominant fission signature is shown below 1eV for each fissile isotope. The neutron generation system with target was designed to get fission signals by fissile materials. The system was decided to overcome neutron backgrounds and to get good counting statistics. Finally, an accurate fissile material content will contribute to safety of spent fuel reuse in future nuclear energy system and optimum design of spent fuel storage site. Additionally, an accurate fissile material content will increase international transparence and credibility for the reuse of PWR spent fuel.

LSDS Development for Isotopic Fissile Assay in Spent Fuel

International Nuclear Information System (INIS)

Lee, Yong Deok; Park, Chang Je; Park, Geun Il; Lee, Jung Won; Song, Kee Chan

2011-01-01

As an option to reduce a spent fuel and reuse an existing fissile material in spent fuel, sodium fast reactor SFR program linked with pyro-processing is under development in KAERI. A uranium-TRU mixture through a pyro-process is used to fabricate SFR fuel. An assay of isotopic fissile content plays an important role in an optimum design of storage site and reuse of fissile materials of spent fuel. Lead slowing down spectrometer LSDS is being developed in KAERI to analyze isotopic fissile material content. LSDS has several features: direct fissile assay, near real time fissile assay, no influence from radiation background, fissile isotopic assay and applicable to spent fuel and recycled fuel. Based on the designed geometry, neutron energy resolution was investigated. The neutron energy spectrum was analyzed as well. Spent fuel emits large number of neutrons by spontaneous fission. Neutron generator must overcome the neutron background to get the pure fission signals from fissile materials. Neutron generator is planned to have compact system with one section electron linac which is easy maintenance, less cost and high neutron yield. The LSD has the power to resolve the fission characteristics from each fissile material. This feature can analyze the content of isotopic fissile. From 1keV to 0.1eV energy range, the energy resolution is enough to get the individual fissile fission signatures. The dominant fission signature is shown below 1eV for each fissile isotope. The neutron generation system with target was designed to get fission signals by fissile materials. The system was decided to overcome neutron backgrounds and to get good counting statistics. Finally, an accurate fissile material content will contribute to safety of spent fuel reuse in future nuclear energy system and optimum design of spent fuel storage site. Additionally, an accurate fissile material content will increase international transparence and credibility for the reuse of PWR spent fuel

Development of spent fuel remote handling technology

Energy Technology Data Exchange (ETDEWEB)

Yoon, Ji Sup; Park, B S; Park, Y S; Oh, S C; Kim, S H; Cho, M W; Hong, D H

1997-12-01

Since the nation`s policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Nuclear criticality safety studies applicable to spent fuel shipping cask designs and spent fuel storage

International Nuclear Information System (INIS)

Tang, J.S.

1980-11-01

Criticality analyses of water-moderated and reflected arrays of LWR fresh and spent fuel assemblies were carried out in this study. The calculated results indicate that using the assumption of fresh fuel loading in spent fuel shipping cask design leads to assembly spacings which are about twice the spacings of spent fuel loadings. Some shipping cask walls of composite lead and water are more effective neutron reflectors than water of 30.48 cm

Estimated routine radiation doses to transportation workers in alternative spent-fuel transportation systems

International Nuclear Information System (INIS)

Schneider, K.J.; Smith, R.I.; Daling, P.M.; Ross, W.A.; McNair, G.W.

1988-01-01

The federal system for the management of spent fuel and high-level radioactive waste includes the acceptance by the US Department of Energy (DOE) of the spent fuel or waste loaded in casks at the reactor or other waste generators, its transportation to a repository, and its handling and final emplacement in the repository. The DOE plans to implement a transportation system that is safe, secure, efficient, and cost-effective and will meet applicable regulatory safety and security requirements. The DOE commissioned the Pacific Northwest Laboratory (PNL) to develop estimates of the routine radiation doses that would result from the operation of a system postulated using current designs and practices. From that evaluation, PNL identified activities/operations that result in the higher fraction of doses, proposed conceptual alternatives that would effectively reduce such exposures, and evaluated the cost-effectiveness of such alternatives. The study is one of a series used in making overall system design and operational decisions in the development of the DOE's spent-fuel/high-level waste transportation system. This paper contains the highlights from the PNL study of the estimated radiation doses to the transportation workers in a postulated reference transportation system and potential alternatives to that system

Comparison of the Amount of Time Spent on Computer Games and Aggressive Behavior in Male Middle School Students of Tehran

OpenAIRE

Mehrangiz Shoaa Kazemi; Zahra Shahabinezhad

2016-01-01

Background and Objectives: Modern technologies have a prominent role in adolescent's daily life. These technologies include specific cultural and moral patterns, which could be highly effective on adolescents. This research aimed at comparing the amount of time spent on computer games and aggressive behavior in male middle school students of Tehran. Materials and Methods: This study had a descriptive design. The study population included all male students of middle school of Tehran, and th...

Automatic Gamma-Scanning System for Measurement of Residual Heat in Spent Nuclear Fuel

International Nuclear Information System (INIS)

Osifo, Otasowie

2007-03-01

In Sweden, spent nuclear fuel will be encapsulated and placed in a deep geological repository. In this procedure, reliable and accurate spent fuel data such as discharge burnup, cooling time and residual heat must be available. The gamma scanning method was proposed in earlier work as a fast and reliable method for the experimental determination of such spent fuel data. This thesis is focused on the recent achievements in the development of a pilot gamma scanning system and its application in measuring spent fuel residual heat. The achievements include the development of dedicated spectroscopic data-acquisition and analysis software and the use of a specially designed calorimeter for calibrating the gamma scanning system. The pilot system is described, including an evaluation of the performance of the spectrum analysis software. Also described are the gamma-scanning measurements on 31 spent PWR fuel assemblies performed using the pilot system. The results obtained for the determination of residual heat are presented, showing an agreement of (2-3) % with both calorimetric and calculated data. In addition, the ability to verify declared data such as discharge burnup and cooling time is demonstrated

Spent fuel transportation problems

International Nuclear Information System (INIS)

Kondrat'ev, A.N.; Kosarev, Yu.A.; Yulikov, E.A.

1977-01-01

In this paper, problems of transportation of nuclear spent fuel to reprocessing plants are discussed. The solutions proposed are directed toward the achievement of the transportation as economic and safe as possible. The increase of the nuclear power plants number in the USSR and the great distances between these plants and the reprocessing plants involve an intensification of the spent fuel transportation. Higher burnup and holdup time reduction cause the necessity of more bulky casks. In this connection, the economic problems become still more important. One of the ways of the problem solution is the development of rational and cheap cask designs. Also, the enforcement in the world of the environmental and personnel health protection requires to increase the transportation reliability and safety. The paper summarizes safe transportation rules with clarifying the following questions: the increase of the transport unit quantity of the spent fuel; rational shipment organization that minimizes vehicle turnover cycle duration; development of the reliable calculation methods to determine strength, thermal conditions and nuclear safety of transport packaging as applied to the vehicles of high capacity; maximum unification of vehicles, calculation methods and documents; and cask testing on models and in pilot scale on specific test rigs to assure that they meet the international safe fuel shipment rules. Besides, some considerations on the choice and use of structural materials for casks are given, and problems of manufacturing such casks from uranium and lead are considered, as well as problems of the development of fireproof shells, control instrumentation, vehicles decontamination, etc. All the problems are considered from the point of view of normal and accidental shipment conditions. Conclusions are presented [ru

German Approach to Spent Fuel Management

International Nuclear Information System (INIS)

Jussofie, A.; Graf, R.; Filbert, W.

2010-01-01

The management of spent fuel was based on two powerful columns until 30 June 2005, i. e. reprocessing and direct disposal. After this date any delivery of spent fuel to reprocessing plants was prohibited so that the direct disposal of unreprocessed spent fuel is the only available option in Germany today. The main steps of the current concept are: (i) Intermediate storage of spent fuel, which is the only step in practice. After the first cooling period in spent fuel storage pools it continues into cask-receiving dry storage facilities. Identification of casks, 'freezing' of inventories in terms of continuity of knowledge, monitoring the access to spent fuel, verifying nuclear material movements in terms of cask transfers and ensurance against diversion of nuclear material belong to the fundamental safeguards goals which have been achieved in the intermediate storage facilities by containment and surveillance techniques in unattended mode. (ii) Conditioning of spent fuel assemblies by separating the fuel rods from structural elements. Since the pilot conditioning facility in Gorleben has not yet come into operation, the underlying safeguards approach which focuses on safeguarding the key measurement points - the spent fuel related way in and out of the facility - has not been applied yet. (iii) Disposal in deep geological formations, but no decision has been made so far neither regarding the location of a geological repository nor regarding the safeguards approach for the disposal concept of spent fuel. The situation was complicated by a moratorium which suspended the underground exploration of the Gorleben salt dome as potential geological repository for spent fuel. The moratorium expires in October 2010. Nevertheless, considerable progress has been made in the development of disposal concepts. According to the basic, so-called POLLUX (registered) -concept spent fuel assemblies are to be conditioned after dry storage and reloaded into the POLLUX (registered) -cask

Storage of spent fuel from power reactors. Proceedings of a symposium

International Nuclear Information System (INIS)

1999-07-01

The symposium gave an opportunity to exchange information on the state of the art and prospects of spent fuel storage, to discuss the worldwide situation and the major factors influencing the national policies in this field and to identify the most important directions that national efforts an international cooperation in this area should take. Dominant message retrieved from the symposium are that the primary spent fuel management solution for the next decades will be interim storage, the duration of time of interim storage becomes longer than earlier anticipated and the storage facilities will have to be designed for receiving also spent fuel from advanced fuel cycle practices (i.e. high burnup and MOX spent fuel). It was noted that the handling and storage of spent fuel is a mature technology and meets the stringent safety requirements applicable in different countries. The changes in nuclear policy and philosophy across the world, and practical considerations, have made interim storage a real necessity in the nuclear power industry. This is being addressed adequately by utilities, vendors and regulators alike

Storage of spent fuel from power reactors. Proceedings of a symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

The symposium gave an opportunity to exchange information on the state of the art and prospects of spent fuel storage, to discuss the worldwide situation and the major factors influencing the national policies in this field and to identify the most important directions that national efforts an international cooperation in this area should take. Dominant message retrieved from the symposium are that the primary spent fuel management solution for the next decades will be interim storage, the duration of time of interim storage becomes longer than earlier anticipated and the storage facilities will have to be designed for receiving also spent fuel from advanced fuel cycle practices (i.e. high burnup and MOX spent fuel). It was noted that the handling and storage of spent fuel is a mature technology and meets the stringent safety requirements applicable in different countries. The changes in nuclear policy and philosophy across the world, and practical considerations, have made interim storage a real necessity in the nuclear power industry. This is being addressed adequately by utilities, vendors and regulators alike Refs, figs, tabs

A preliminary evaluation of the ability of from-reactor casks to geometrically accommodate commercial LWR spent nuclear fuel

International Nuclear Information System (INIS)

Andress, D.; Joy, D.S.; McLeod, N.B.; Peterson, R.W.; Rahimi, M.

1991-01-01

The Department of Energy has sponsored a number of cask design efforts to define several transportation casks to accommodate the various assemblies expected to be accepted by the Federal Waste Management System. At this time, three preliminary cask designs have been selected for the final design--the GA-4 and GA-9 truck casks and the BR-100 rail cask. In total, this assessment indicates that the current Initiative I cask designs can be expected to dimensionally accommodate 100% of the PWR fuel assemblies (other than the extra-long South Texas Fuel) with control elements removed, and >90% of the assemblies having the control elements as an integral part of the fuel assembly. For BWR assemblies, >99% of the assemblies can be accommodated with fuel channels removed. This paper summarizes preliminary results of one part of that evaluation related to the ability of the From-Reactor Initiative I casks to accommodate the physical and radiological characteristics of the Spent Nuclear Fuel projected to be accepted into the Federal Waste Management System. 3 refs., 5 tabs

Spent fuels transportation coming from Australia

International Nuclear Information System (INIS)

2002-01-01

Maritime transportation of spent fuels from Australia to France fits into the contract between COGEMA and ANSTO, signed in 1999. This document proposes nine information cards in this domain: HIFAR a key tool of the nuclear, scientific and technological australian program; a presentation of the ANSTO Australian Nuclear Science and Technology Organization; the HIFAR spent fuel management problem; the COGEMA expertise in favor of the research reactor spent fuel; the spent fuel reprocessing at La Hague; the transports management; the transport safety (2 cards); the regulatory framework of the transports. (A.L.B.)

Safety analysis of spent fuel packaging

International Nuclear Information System (INIS)

Akamatsu, Hiroshi; Taniuchi, Hiroaki; Tai, Hideto

1987-01-01

Many types of spent fuel packagings have been manufactured and been used for transport of spent fuels discharged from nuclear power plant. These spent fuel packagings need to be assesed thoroughly about safety transportation because spent fuels loaded into the packaging have high radioactivity and generation of heat. This paper explains the outline of safety analysis of a packaging, Safety analysis is performed for structural, thermal, containment, shielding and criticality factors, and MARC-CDC, TRUMP, ORIGEN, QAD, ANISN, KENO, etc computer codes are used for such analysis. (author)

Spent Fuel Working Group Report

International Nuclear Information System (INIS)

O'Toole, T.

1993-11-01

The Department of Energy is storing large amounts of spent nuclear fuel and other reactor irradiated nuclear materials (herein referred to as RINM). In the past, the Department reprocessed RINM to recover plutonium, tritium, and other isotopes. However, the Department has ceased or is phasing out reprocessing operations. As a consequence, Department facilities designed, constructed, and operated to store RINM for relatively short periods of time now store RINM, pending decisions on the disposition of these materials. The extended use of the facilities, combined with their known degradation and that of their stored materials, has led to uncertainties about safety. To ensure that extended storage is safe (i.e., that protection exists for workers, the public, and the environment), the conditions of these storage facilities had to be assessed. The compelling need for such an assessment led to the Secretary's initiative on spent fuel, which is the subject of this report. This report comprises three volumes: Volume I; Summary Results of the Spent Fuel Working Group Evaluation; Volume II, Working Group Assessment Team Reports and Protocol; Volume III; Operating Contractor Site Team Reports. This volume presents the overall results of the Working Group's Evaluation. The group assessed 66 facilities spread across 11 sites. It identified: (1) facilities that should be considered for priority attention. (2) programmatic issues to be considered in decision making about interim storage plans and (3) specific vulnerabilities for some of these facilities

Impact of new ingredients obtained from brewer's spent yeast on bread characteristics.

Science.gov (United States)

Martins, Z E; Pinho, O; Ferreira, I M P L V O

2018-05-01

The impact of bread fortification with β-glucans and with proteins/proteolytic enzymes from brewers' spent yeast on physical characteristics was evaluated. β-Glucans extraction from spent yeast cell wall was optimized and the extract was incorporated on bread to obtain 2.02 g β-glucans/100 g flour, in order to comply with the European Food Safety Authority guidelines. Protein/proteolytic enzymes extract from spent yeast was added to bread at 60 U proteolytic activity/100 g flour. Both β-glucans rich and proteins/proteolytic enzymes extracts favoured browning of bread crust. However, breads with proteins/proteolytic enzymes addition presented lower specific volume, whereas the incorporation of β-glucans in bread lead to uniform pores that was also noticeble in terms of higher specific volume. Overall, the improvement of nutritional/health promoting properties is highlighted with β-glucan rich extract, not only due to bread β-glucan content but also for total dietary fibre content (39% increase). The improvement was less noticeable for proteins/proteolytic enzymes extract. Only a 6% increase in bread protein content was noted with the addition of this extract and higher protein content would most likely accentuate the negative impact on bread specific volume that in turn could impair consumer acceptance. Therefore, only β-glucan rich extract is a promising bread ingredient.

Spent nuclear fuel disposal liability insurance

International Nuclear Information System (INIS)

Martin, D.W.

1984-01-01

This thesis examines the social efficiency of nuclear power when the risks of accidental releases of spent fuel radionuclides from a spent fuel disposal facility are considered. The analysis consists of two major parts. First, a theoretical economic model of the use of nuclear power including the risks associated with releases of radionuclides from a disposal facility is developed. Second, the costs of nuclear power, including the risks associated with a radionuclide release, are empirically compared to the costs of fossil fuel-fired generation of electricity. Under the provisions of the Nuclear Waste Policy Act of 1982, the federally owned and operated spent nuclear fuel disposal facility is not required to maintain a reserve fund to cover damages from an accidental radionuclide release. Thus, the risks of a harmful radionuclide release are not included in the spent nuclear fuel disposal fee charged to the electric utilities. Since the electric utilities do not pay the full, social costs of spent fuel disposal, they use nuclear fuel in excess of the social optimum. An insurance mechanism is proposed to internalize the risks associated with spent fueled disposal. Under this proposal, the Federal government is required to insure the disposal facility against any liabilities arising from accidental releases of spent fuel radionuclides

Exploring the acceptable travel time concept in the US and European contexts. Results from Berkeley, CA and Delft, The Netherlands

NARCIS (Netherlands)

Milakis, D.; van Wee, G.P.

2016-01-01

“Do people consider an acceptable travel time?” We raised this question in Milakis, Cervero, and van Wee (2015) to explore the validity of the acceptable travel time concept as a possible factor in the travel and destination decision-making process. Results from interviews with 20 subjects in

Determination of prerequisites for the estimation of transportation cost of spent fuels

International Nuclear Information System (INIS)

Choi, Heui Joo; Lee, Jong Youl; Kim, Seong Ki; Cha, Jeong Hoon; Choi, Jong Won

2007-10-01

The cost for the spent fuel management includes the costs for the interim storage, the transportation, and the permanent disposal of the spent fuels. The scope of this report is limited to the cost for the spent fuel transportation. KAERI is developing a cost estimation method for the spent fuel transportation through a joint study with the French AREVA TN. Several prerequisites should be fixed in order to estimate the cost for the spent fuel transportation properly. In this report we produced them considering the Korean current status on the management of spent fuels. The representative characteristics of a spent fuel generated from the six nuclear reactors at the YG site were determined. Total 7,200 tons of spent fuels are projected with the lifespan of 60 years. As the transportation mode, sea transportation and road transportation is recommended considering the location of the YG site and the hypothetical Centralized Interim Storage Facility (CISF) and Final Repository (FR). The sea route and transportation time were analyzed by using a sea distance analysis program which the NORI (National Oceanographic Research Institute) supplies on a web. Based on the results of the analysis, the shipping rates were determined. The regulations related to the spent fuel transportation were reviewed. The characteristics of the transportation vessel and a trailer were suggested. The handling and transportation systems at the YG site, Centralized Interim Storage Facility, and the Final Repository were described in detail for the purpose of the cost estimation of the spent fuel transportation. From the detail description the major components of the transportation system were determined for the conceptual design. It is believed that the conceptual design of the transportation system developed in this report will be used for the analysis of transportation logistics and the cost estimation of spent fuels

Electrometallurgical treatment of metallic spent nuclear fuel stored at the Hanford Site

International Nuclear Information System (INIS)

Laidler, J.J.; Gay, E.C.

1996-01-01

The major component of the DOE spent nuclear fuel inventory is the metallic fuel stored at the Hanford site in the southeastern part of the state of Washington. Most of this fuel was discharged from the N-Reactor; a small part of the inventory is fuel from the early Hanford production reactors. The U.S. Department of Energy (DOE) plans to remove these fuels from the spent fuel storage pools in which they are presently stored, dry them, and place them in interim storage at a location at the Hanford site that is far removed from the Columbia River. It is not yet certain that these fuels will be acceptable for disposal in a mined geologic repository without further treatment, due to their potential pyrophoric character. A practical method for treatment of the Hanford metallic spent fuel, based on an electrorefining process, has been developed and has been demonstrated with unirradiated N-Reactor fuel and with simulated single-pass reactor (SPR) spent fuel. The process can be operated with any desired throughput rates; being a batch process, it is simply a matter of setting the size of the electrorefiner modules and the number of such modules. A single module, prototypic of a production-scale module, has been fabricated and testing is in progress at a throughput rate of 150 kg (heavy metal) per day. The envisioned production version would incorporate additional anode baskets and cathode tubes and provide a throughput rate of 333 kgHM/day. A system with four of these modules would permit treatment of Hanford metallic fuels at a rate of at least 250 metric tons per year

Near surface spent fuel storage: environmental issues

International Nuclear Information System (INIS)

Nelson, I.C.; Shipler, D.B.; McKee, R.W.; Glenn, R.D.

1979-01-01

Interim storage of spent fuel appears inevitable because of the lack of reprocessing plants and spent fuel repositories. This paper examines the environmental issues potentially associated with management of spent fuel before disposal or reprocessing in a reference scenario. The radiological impacts of spent fuel storage are limited to low-level releases of noble gases and iodine. Water needed for water basin storage of spent fuel and transportation accidents are considered; the need to minimize the distance travelled is pointed out. Resource commitments for construction of the storage facilities are analyzed

Spent Fuel Management Newsletter. No. 1

International Nuclear Information System (INIS)

1990-03-01

This Newsletter has been prepared in accordance with the recommendations of the International Regular Advisory Group on Spent Fuel Management and the Agency's programme (GC XXXII/837, Table 76, item 14). The main purpose of the Newsletter is to provide Member States with new information about the state-of-the-art in one of the most important parts of the nuclear fuel cycle - Spent Fuel Management. The contents of this publication consists of two parts: (1) IAEA Secretariat contribution -work and programme of the Nuclear Materials and Fuel Cycle Technology Section of the Division of Nuclear Fuel Cycle and Waste Management, recent and planned meetings and publications, Technical Co-operation projects, Co-ordinated Research programmes, etc. (2) Country reports - national programmes on spent fuel management: current and planned storage and reprocessing capacities, spent fuel arisings, safety, transportation, storage, treatment of spent fuel, some aspects of uranium and plutonium recycling, etc. The IAEA expects to publish the Newsletter once every two years between the publications of the Regular Advisory Group on Spent Fuel Management. Figs and tabs

Spent Nuclear Fuel project, project management plan

International Nuclear Information System (INIS)

Fuquay, B.J.

1995-01-01

The Hanford Spent Nuclear Fuel Project has been established to safely store spent nuclear fuel at the Hanford Site. This Project Management Plan sets forth the management basis for the Spent Nuclear Fuel Project. The plan applies to all fabrication and construction projects, operation of the Spent Nuclear Fuel Project facilities, and necessary engineering and management functions within the scope of the project

Methodology for determining criteria for storing spent fuel in air

International Nuclear Information System (INIS)

Reid, C.R.; Gilbert, E.R.

1986-11-01

Dry storage in an air atmosphere is a method being considered for spent light water reactor (LWR) fuel as an alternative to storage in an inert gas environment. However, methods to predict fuel integrity based on oxidation behavior of the fuel first must be evaluated. The linear cumulative damage method has been proposed as a technique for defining storage criteria. Analysis of limited nonconstant temperature data on nonirradiated fuel samples indicates that this approach yields conservative results for a strictly decreasing-temperature history. On the other hand, the description of damage accumulation in terms of remaining life concepts provides a more general framework for making predictions of failure. Accordingly, a methodology for adapting remaining life concepts to UO 2 oxidation has been developed at Pacific Northwest Laboratory. Both the linear cumulative damage and the remaining life methods were used to predict oxidation results for spent fuel in which the temperature was decreased with time to simulate the temperature history in a dry storage cask. The numerical input to the methods was based on oxidation data generated with nonirradiated UO 2 pellets. The calculated maximum allowable storage temperatures are strongly dependent on the temperature-time profile and emphasize the conservatism inherent in the linear cumulative damage model. Additional nonconstant temperature data for spent fuel are needed to both validate the proposed methods and to predict temperatures applicable to actual spent fuel storage

Regeneration of volatile compounds in Fuji apples following ultra low oxygen atmosphere storage and its effect on sensory acceptability.

Science.gov (United States)

Altisent, Rosa; Graell, Jordi; Lara, Isabel; López, Luisa; Echeverría, Gemma

2008-09-24

The aim of this work was to assess whether extra time spent under AIR conditions after storage in an ultra low oxygen (ULO) atmosphere could allow the regeneration of volatile compound emission without negatively affecting quality parameters and the consumer acceptability of Fuji apples. Fruits were stored for 19 and 30 weeks at 1 degrees C and 92% RH under ULO atmosphere conditions (1 kPa O 2:1 kPa CO 2) or under ULO conditions followed by different periods (2 and 4 weeks) in cold AIR atmosphere (ULO + 2w or ULO + 4w, respectively). Standard quality and emission of volatile compounds were analyzed after storage plus 1 and 7 days at 20 degrees C. Sensory attributes and acceptability were also determined after 7 days at 20 degrees C. The extra period of 30 weeks in an AIR atmosphere after ULO storage resulted in an increase in the concentration of the compounds that most contribute to the flavor of Fuji apples. These fruits were relatively well accepted by consumers despite a slight decline in firmness and acidity.

A Monte Carlo Based Spent Fuel Analysis Safeguards Strategy Assessment

Energy Technology Data Exchange (ETDEWEB)

Fensin, Michael L.; Tobin, Stephen J.; Swinhoe, Martyn T.; Menlove, Howard O.; Sandoval, Nathan P. [Los Alamos National Laboratory, E540, Los Alamos, NM 87545 (United States)

2009-06-15

Safeguarding nuclear material involves the detection of diversions of significant quantities of nuclear materials, and the deterrence of such diversions by the risk of early detection. There are a variety of motivations for quantifying plutonium in spent fuel assemblies by means of nondestructive assay (NDA) including the following: strengthening the capabilities of the International Atomic Energy Agencies ability to safeguards nuclear facilities, shipper/receiver difference, input accountability at reprocessing facilities and burnup credit at repositories. Many NDA techniques exist for measuring signatures from spent fuel; however, no single NDA technique can, in isolation, quantify elemental plutonium and other actinides of interest in spent fuel. A study has been undertaken to determine the best integrated combination of cost effective techniques for characterizing Pu mass in spent fuel for nuclear safeguards. A standardized assessment process was developed to compare the effective merits and faults of 12 different detection techniques in order to integrate a few techniques and to down-select among the techniques in preparation for experiments. The process involves generating a basis burnup/enrichment/cooling time dependent spent fuel assembly library, determining and identifying limiting diversion scenarios, developing detector models and quantifying the capability of each NDA technique. Because hundreds of input and output files must be managed in the couplings of data transitions for the different facets of the assessment process, a graphical user interface (GUI) was development that automates the process. This GUI allows users to visually create diversion scenarios with varied replacement materials, and generate a MCNPX fixed source detector assessment input file. The end result of the assembly library assessment is to select a set of common source terms and diversion scenarios for quantifying the capability of each of the 12 NDA techniques. We present here

A Monte Carlo based spent fuel analysis safeguards strategy assessment

International Nuclear Information System (INIS)

Fensin, Michael L.; Tobin, Stephen J.; Swinhoe, Martyn T.; Menlove, Howard O.; Sandoval, Nathan P.

2009-01-01

Safeguarding nuclear material involves the detection of diversions of significant quantities of nuclear materials, and the deterrence of such diversions by the risk of early detection. There are a variety of motivations for quantifying plutonium in spent fuel assemblies by means of nondestructive assay (NDA) including the following: strengthening the capabilities of the International Atomic Energy Agencies ability to safeguards nuclear facilities, shipper/receiver difference, input accountability at reprocessing facilities and burnup credit at repositories. Many NDA techniques exist for measuring signatures from spent fuel; however, no single NDA technique can, in isolation, quantify elemental plutonium and other actinides of interest in spent fuel. A study has been undertaken to determine the best integrated combination of cost effective techniques for quantifying plutonium mass in spent fuel for nuclear safeguards. A standardized assessment process was developed to compare the effective merits and faults of 12 different detection techniques in order to integrate a few techniques and to down-select among the techniques in preparation for experiments. The process involves generating a basis burnup/enrichment/cooling time dependent spent fuel assembly library, creating diversion scenarios, developing detector models and quantifying the capability of each NDA technique. Because hundreds of input and output files must be managed in the couplings of data transitions for the different facets of the assessment process, a graphical user interface (GUI) was development that automates the process. This GUI allows users to visually create diversion scenarios with varied replacement materials, and generate a MCNPX fixed source detector assessment input file. The end result of the assembly library assessment is to select a set of common source terms and diversion scenarios for quantifying the capability of each of the 12 NDA techniques. We present here the generalized

Method for calculating the duration of vacuum drying of a metal-concrete container for spent nuclear fuel

Science.gov (United States)

Karyakin, Yu. E.; Nekhozhin, M. A.; Pletnev, A. A.

2013-07-01

A method for calculating the quantity of moisture in a metal-concrete container in the process of its charging with spent nuclear fuel is proposed. A computing method and results obtained by it for conservative estimation of the time of vacuum drying of a container charged with spent nuclear fuel by technologies with quantization and without quantization of the lower fuel element cluster are presented. It has been shown that the absence of quantization in loading spent fuel increases several times the time of vacuum drying of the metal-concrete container.

Fact sheet on spent fuel management

International Nuclear Information System (INIS)

2006-01-01

The IAEA gives high priority to safe and effective spent fuel management. As an example of continuing efforts, the 2003 International Conference on Storage of Spent Fuel from Power Reactors gathered 125 participants from 35 member states to exchange information on this important subject. With its large number of Member States, the IAEA is well-positioned to gather and share information useful in addressing Member State priorities. IAEA activities on this topic include plans to produce technical documents as resources for a range of priority topics: spent fuel performance assessment and research, burnup credit applications, cask maintenance, cask loading optimization, long term storage requirements including records maintenance, economics, spent fuel treatment, remote technology, and influence of fuel design on spent fuel storage. In addition to broader topics, the IAEA supports coordinated research projects and technical cooperation projects focused on specific needs. The proceedings of the 2003 IAEA conference on storage of spent fuel from power reactors has been ranked in the top twenty most accessed IAEA publications. These proceedings are available for free downloads at http://www-pub.iaea.org/MTCD/publications/PubDetails.asp?pubId=6924]. The IAEA organized and held a 2004 meeting focused on long term spent fuel storage provisions in Central and Eastern Europe, using technical cooperation funds to support participation by these Member States. Over ninety percent of the participants in this meeting rated its value as good or excellent, with participants noting that the IAEA is having a positive effect in stimulating communication, cooperation, and information dissemination on this important topic. The IAEA was advised in 2004 that results from a recent coordinated research project (IAEA-TECDOC-1343) were used by one Member State to justify higher clad temperatures for spent fuel in dry storage, leading to more efficient storage and reduced costs. Long term

Possibility for dry storage of the WWR-K reactor spent fuel

International Nuclear Information System (INIS)

Arinkin, F.M.; Belyakova, E.A.; Gizatulin, Sh.Kh.; Khromushin, I.V.; Koltochik, S.N.; Maltseva, R.M.; Medvedeva, Z.V.; Petukhov, V.K.; Soloviev, Yu.A.; Zhotabaev, Zh.R.

2000-01-01

This work is devoted to development of the way for dry storage of spent fuel of the WWR-K reactor. Residual energy release in spent fuel element assembly was determined via fortune combination of calculations and experiments. The depth of fission product occurrence relative to the fuel element shroud surface was found experimentally. The time of fission product release to the fuel element shroud surface was estimated. (author)

PWR and BWR spent fuel assembly gamma spectra measurements

Energy Technology Data Exchange (ETDEWEB)

Vaccaro, S. [European Commission, DG Energy, Directorate EURATOM Safeguards Luxembourg (Luxembourg); Tobin, S.J.; Favalli, A. [Los Alamos National Laboratory, Los Alamos, NM (United States); Grogan, B. [Oak Ridge National Laboratory, Oak Ridge (United States); Jansson, P. [Uppsala University, Uppsala (Sweden); Liljenfeldt, H. [Oak Ridge National Laboratory, Oak Ridge (United States); Mozin, V. [Lawrence Livermore National Laboratory, Livermore, CA (United States); Hu, J. [Oak Ridge National Laboratory, Oak Ridge (United States); Schwalbach, P. [European Commission, DG Energy, Directorate EURATOM Safeguards Luxembourg (Luxembourg); Sjöland, A. [Swedish Nuclear Fuel and Waste Management Company (SKB) (Sweden); Trellue, H.; Vo, D. [Los Alamos National Laboratory, Los Alamos, NM (United States)

2016-10-11

A project to research the application of nondestructive assay (NDA) to spent fuel assemblies is underway. The research team comprises the European Atomic Energy Community (EURATOM), embodied by the European Commission, DG Energy, Directorate EURATOM Safeguards; the Swedish Nuclear Fuel and Waste Management Company (SKB); two universities; and several United States national laboratories. The Next Generation of Safeguards Initiative–Spent Fuel project team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. This study focuses on spectrally resolved gamma-ray measurements performed on a diverse set of 50 assemblies [25 pressurized water reactor (PWR) assemblies and 25 boiling water reactor (BWR) assemblies]; these same 50 assemblies will be measured with neutron-based NDA instruments and a full-length calorimeter. Given that encapsulation/repository and dry storage safeguards are the primarily intended applications, the analysis focused on the dominant gamma-ray lines of {sup 137}Cs, {sup 154}Eu, and {sup 134}Cs because these isotopes will be the primary gamma-ray emitters during the time frames of interest to these applications. This study addresses the impact on the measured passive gamma-ray signals due to the following factors: burnup, initial enrichment, cooling time, assembly type (eight different PWR and six different BWR fuel designs), presence of gadolinium rods, and anomalies in operating history. To compare the measured results with theory, a limited number of ORIGEN-ARP simulations were performed.

Compact approach to long-term monitored retrievable storage of spent fuel

International Nuclear Information System (INIS)

Muir, D.W.

1986-01-01

We examine a new approach to monitored retrievable storage (MRS) that is extremely compact in terms of total land use and may offer increased security and reduced environmental impact, relative to current designs. This approach involves embedding the spent fuel assemblies in monolithic blocks of metallic aluminum. While this would clearly require increased effort in the spent-fuel packaging phase, it would offer in return the above-mentioned environmental advantages, plus the option of easily extending the surface-storage time scale from several years to several decades if a need for longer storage times should arise in the future

Qualitative and quantitative characteristics of fission products in spent nuclear fuel from RBMK-type reactor

International Nuclear Information System (INIS)

Adlys, G.; Adliene, D.

2002-01-01

Well-known empirical models or experimental instruments and methods for the estimation of fission product yields do not allow prediction of the behavior and evaluation of the time-dependent qualitative and quantitative characteristics of all fission products in spent nuclear fuel during long-term storage. Several computer codes were developed in different countries to solve this problem. French codes APOLLO1 and PEPIN were used in this work for modeling the characteristics of spent nuclear fuel in the RBMK reactor. The modeling results of qualitative and quantitative characteristics of long-lived fission products for different cooling periods of spent nuclear fuel, including 50-year cooling period, are presented in this paper. The 50-year cooling period conforms to the foreseen time of storage of spent nuclear fuel in CONSTOR and CASTOR casks at the Ignalina NPP. These results correlate well with evaluated quantities for the well-known yields of the nuclides and could be used for the compilation of the database for long-lived fission products in spent nuclear fuel from the RBMK-type reactor. They allow one to predict and to solve effectively safety problems concerning with long-term spent nuclear fuel storage in casks. (author)

Storage of spent fuel from power reactors. 2003 conference proceedings

International Nuclear Information System (INIS)

2003-01-01

An International Conference on Storage of Spent Fuel from Power Reactors was organized by the IAEA in co-operation with the OECD Nuclear Energy Agency. The conference gave an opportunity to exchange information on the state of the art and prospects of spent fuel storage, to discuss the worldwide situation and the major factors influencing the national policies in this field and to identify the most important directions that national efforts and international co-operation in this area should take. The conference confirmed that the primary spent fuel management solution for the next decades will be interim storage. While the next step can be reprocessing or disposal, all spent fuel or high level waste from reprocessing must sooner or later be disposed of. The duration of interim storage is now expected to be much longer than earlier projections (up to 100 years and beyond). The storage facilities will have to be designed for these longer storage times and also for receiving spent fuel from advanced fuel cycle practices (i.e. high burnup and MOX spent fuel). It was noted that the handling and storage of spent fuel is a mature technology and meets the stringent safety requirements applicable in the different countries. The changes in nuclear policy and philosophy across the world, and practical considerations, have made storage a real necessity in the nuclear power industry. Utilities, vendors and regulators alike are addressing this adequately. The IAEA wishes to express appreciation to all chairs and co-chairs as well as all authors for their presentations to the conference and papers included in these proceedings

Storage of spent fuel from power reactors. 2003 conference proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-10-01

An International Conference on Storage of Spent Fuel from Power Reactors was organized by the IAEA in co-operation with the OECD Nuclear Energy Agency. The conference gave an opportunity to exchange information on the state of the art and prospects of spent fuel storage, to discuss the worldwide situation and the major factors influencing the national policies in this field and to identify the most important directions that national efforts and international co-operation in this area should take. The conference confirmed that the primary spent fuel management solution for the next decades will be interim storage. While the next step can be reprocessing or disposal, all spent fuel or high level waste from reprocessing must sooner or later be disposed of. The duration of interim storage is now expected to be much longer than earlier projections (up to 100 years and beyond). The storage facilities will have to be designed for these longer storage times and also for receiving spent fuel from advanced fuel cycle practices (i.e. high burnup and MOX spent fuel). It was noted that the handling and storage of spent fuel is a mature technology and meets the stringent safety requirements applicable in the different countries. The changes in nuclear policy and philosophy across the world, and practical considerations, have made storage a real necessity in the nuclear power industry. Utilities, vendors and regulators alike are addressing this adequately. The IAEA wishes to express appreciation to all chairs and co-chairs as well as all authors for their presentations to the conference and papers included in these proceedings.

In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth

Directory of Open Access Journals (Sweden)

Ramli Mat

2011-05-01

Full Text Available Currently, semi-refined and refined vegetable oils are used as a feedstock in biodiesel production. However, due to competition with conventional fossil fuel, economic reasons, shortage supply of food and its social impact on the global scale has somewhat slowed the development of biodiesel industry. Studies have been conducted to recover oil from mill palm oil operation especially from the spent bleaching earth. Hence, the study was to investigate the potential recovery of oil from spent bleaching earth to be used as a feedstock for biodiesel production. The effect of different types of catalysts (sodium hydroxide alkali and sulfuric acid catalysts on biodiesel yield was studied. In addition, the effect of volume addition of methanol to the weight of spent bleaching earth on the product yield was also studied. Furthermore, the effect of ratio of hexane to methanol was also carried out to determine its product yield. The studies were carried out in an in-situ biodiesel reactor system and the biodiesel product was analyzed using gas chromatography mass spectrometry. Result shows that the use of alkali catalyst produced the highest yield of biodiesel and the most optimum biodiesel yield was obtained when the methanol to spent bleaching earth ratio was 3.2:1 (gram of methanol: gram of SBE and hexane to methanol ratio of 0.6:1 (volume of hexane: volume of methanol. © 2011 BCREC UNDIP. All rights reserved(Received: 19th December 2010, Revised: 10th May 2011; Accepted: 18th May 2011[How to Cite: R. Mat, O.S. Ling, A. Johari, M. Mohamed. (2011. In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth. Bulletin of Chemical Reaction Engineering & Catalysis, 6(1: 53-57. doi:10.9767/bcrec.6.1.678.53-57][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.1.678.53-57 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/678 ] | View in