Study of Measurement Strategies of Geometric Deviation of the Position of the Threaded Holes

Science.gov (United States)

Drbul, Mário; Martikan, Pavol; Sajgalik, Michal; Czan, Andrej; Broncek, Jozef; Babik, Ondrej

2017-12-01

Verification of product and quality control is an integral part of current production process. In terms of functional requirements and product interoperability, it is necessary to analyze their dimensional and also geometric specifications. Threaded holes are verified elements too, which are a substantial part of detachable screw connections and have a broad presence in engineering products. This paper deals with on the analysing of measurement strategies of verification geometric deviation of the position of the threaded holes, which are the indirect method of measuring threaded pins when applying different measurement strategies which can affect the result of the verification of the product..

A Moiré Pattern-Based Thread Counter

Science.gov (United States)

Reich, Gary

2017-10-01

Thread count is a term used in the textile industry as a measure of how closely woven a fabric is. It is usually defined as the sum of the number of warp threads per inch (or cm) and the number of weft threads per inch. (It is sometimes confusingly described as the number of threads per square inch.) In recent years it has also become a subject of considerable interest and some controversy among consumers. Many consumers consider thread count to be a key measure of the quality or fineness of a fabric, especially bed sheets, and they seek out fabrics that advertise high counts. Manufacturers in turn have responded to this interest by offering fabrics with ever higher claimed thread counts (sold at ever higher prices), sometime achieving the higher counts by distorting the definition of the term with some "creative math." In 2005 the Federal Trade Commission noted the growing use of thread count in advertising at the retail level and warned of the potential for consumers to be misled by distortions of the definition.

Comparison of in-vivo failure of single-thread and dual-thread temporary anchorage devices over 18 months: A split-mouth randomized controlled trial.

Science.gov (United States)

Durrani, Owais Khalid; Shaheed, Sohrab; Khan, Arsalan; Bashir, Ulfat

2017-10-01

The purpose of this study was to compare the in-vivo failure rates of single-thread and dual-thread temporary anchorage device (TAD) designs over 18 months. Thirty patients with skeletal Class II Division 1 malocclusion requiring anchorage from TADs for retraction of maxillary incisors into the extracted premolar space were recruited in this parallel group, split-mouth, randomized controlled trial. A block randomization sequence was generated with Random Allocation Software (version 2.0; Isfahan, Iran) with the allocations concealed in sequentially numbered, opaque, sealed envelopes. A total of 60 TADs (diameter, 2 mm; length, 10 mm) were placed in the maxillary arches of these patients with random allocation of the 2 types to the left and the right sides in a 1:1 ratio. All TADs were placed between the roots of the second premolar and the first molar and were immediately loaded. Patients were followed for a minimum of 12 months and a maximum of 18 months for the failure of the TADs. Data were analyzed blindly on an intention-to-treat basis. Four TADs (13.3%) failed in the single-thread group, and 6 TADs (20%) failed in the dual-thread group. The McNemar test showed an insignificant difference (P = 0.72) between the 2 groups. An odds ratio of 1.6 (95% confidence interval, 0.39-6.97) showed no significant associations among the variables. Most TADs failed in the first month after insertion (50%). The failure rate of dual-thread TADs compared with single-thread TADs is statistically insignificant when placed in the maxilla for retraction of the anterior segment. Registration: The trial was not registered before commencement. The protocol was not published before the trial. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Study the Possibility for Manufacturing a Conical Pipe Thread by Expansion

Directory of Open Access Journals (Sweden)

S. A. Evsyukov

2014-01-01

Full Text Available The experience of operating oil wells showed that the weak point of tubing is a connecting thread.Currently, the pipe thread of the specified class is made using the technology of cutting. The process of cutting a thread leads to waste metal chips and cutting fibers. Therefore the idea arose to make a thread by the method of pressure shaping.The aim was to study the possibility for full filling of the threaded matrix profile.The study was conducted by means of mathematical modeling in the software complex DEFORM. The impact of technological and geometrical factors on the process of form change was in detail analyzed. Thus, a work-piece material was specified to be continuous, isotropic, homogeneous, viscous-plastic and a tool material was set as a hard one. The friction was speci-fied according to Prandtl-Siebel law with the friction factor of 0.3. The thread profile has been replaced by the annular grooves of the similar profile. The task was considered to be axisymmetric.Scientific novelty of received results consists in revealed regularities of the plastic de-formation process of the work-piece when forming a profile of the conical thread on the pipe in the process of its expansion with a conical punch.The simulation allowed us to obtain information about the stress-strain state of the work-piece and tool, about the nature of the metal flow during deformation, and about the strength parameters of the process.In particular, it was found that the work-piece metal is displaced along the pipe axis both in punch movement direction and in the opposite one. Thus, a mechanical end burr is formed. The article shows that to remove a mechanical end burr requires insertion of extra limit stop housing. The article also analyses distribution of stresses arising in the matrix at the final moment of deformation. It was proved that the highest stresses occur in the hollows of the threaded part of matrix. Thus, their absolute value does not exceed 470 MPa that

PERBEDAAN UNSAFE ACTIONS ANTAR SHIFT KERJA PADA BAGIAN THREADING UNIT PRODUKSI I PT X DI SURABAYA

OpenAIRE

Insanno, Jenius Setio

2017-01-01

PT. X is one of the companies that produces iron pipe in Indonesia. Unit of production I PT. X threading part used work shift system. Few months ago there was an accident happened to a night shift workers threading part, and it caused them to be rushed to the hospital and got medical help. The purpose of this research was to analyze the difference between unsafe action on work shifts threading of PT. X. This research was an observational descriptive study that used crossectional approach. The...

Perbedaan Unsafe Actions Antar Shift Kerja pada Bagian Threading Unit Produksi I PT X di Surabaya

OpenAIRE

Insanno, Jenius Setio

2016-01-01

PT. X is one of the companies that produces iron pipe in Indonesia. Unit of production I PT. X threading part used work shift system. Few months ago there was an accident happened to a night shift workers threading part, and it caused them to be rushed to the hospital and got medical help. The purpose of this research was to analyze the difference between unsafe action on work shifts threading of PT. X. This research was an observational descriptive study that used crossectional approach. The...

Rate of Threading a Cellulose Chain into the Binding Tunnel of a Cellulase

DEFF Research Database (Denmark)

Cruys-Bagger, Nicolaj; Alasepp, Kadri; Andersen, Morten

2016-01-01

the tunnel with a cellulose strand and end with the opposite, that is, the dethreading process. Evidence has suggested that threading or dethreading may be rate-limiting for the overall enzyme reaction. To directly elucidate the rates of threading and dethreading, we analyzed experimental data with respect......, at which other steps also influenced the overall dynamics. These results will be helpful in identifying rate-limiting steps for cellulases and, in turn, targets for rational design of faster enzymes.......Industrially important cellulase Cel7A hydrolyzes crystalline cellulose by a complex processive mechanism in which the enzyme slides along the cellulose surface with one strand of the polymeric substrate channeled through its catalytic tunnel. Each processive run must start with threading...

Optically variable threads and polarization effects

Science.gov (United States)

Kretschmar, Friedrich; Burchard, Theodor; Heim, Manfred

2006-02-01

Based on common criteria for efficient security elements for banknotes the set-up of a state-of-the-art holographic security thread is described - as first representative of window embedded OVD. We continue with new colour-shifting OVD-threads - based on physical vapour deposition thin-film and liquid crystal technology. These three then form the family of optically variable threads following the same set of requirements for efficiency, durability, service to all authentication levels and economics. In addition to this set of OVD threads we introduce how liquid crystal based phase retarding layer can be used to install new authentication channels for the public use up-to machine authentication. Also we show the perspective how those development can be used to install similar sets of OVD families of foil elements on banknotes.

AN MHD AVALANCHE IN A MULTI-THREADED CORONAL LOOP

Energy Technology Data Exchange (ETDEWEB)

Hood, A. W.; Cargill, P. J.; Tam, K. V. [School of Mathematics and Statistics, University of St Andrews, St Andrews, Fife, KY16 9SS (United Kingdom); Browning, P. K., E-mail: awh@st-andrews.ac.uk [School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom)

2016-01-20

For the first time, we demonstrate how an MHD avalanche might occur in a multithreaded coronal loop. Considering 23 non-potential magnetic threads within a loop, we use 3D MHD simulations to show that only one thread needs to be unstable in order to start an avalanche even when the others are below marginal stability. This has significant implications for coronal heating in that it provides for energy dissipation with a trigger mechanism. The instability of the unstable thread follows the evolution determined in many earlier investigations. However, once one stable thread is disrupted, it coalesces with a neighboring thread and this process disrupts other nearby threads. Coalescence with these disrupted threads then occurs leading to the disruption of yet more threads as the avalanche develops. Magnetic energy is released in discrete bursts as the surrounding stable threads are disrupted. The volume integrated heating, as a function of time, shows short spikes suggesting that the temporal form of the heating is more like that of nanoflares than of constant heating.

THE BASIC PRINCIPLES OF THE INTEGRATED MANAGEMENT OF THE PROCESS OF ASSEMBLY AND THREADING

Directory of Open Access Journals (Sweden)

Anton Skorkin

2017-11-01

Full Text Available The subject matter of this article is the issues related to the integrated management of assembling operations of fastening and threading elements at all stages of their implementation. The goal is to develop the generalized structure of the data management system of the process of assembly and threading. The objectives are: to justify the principles of managing the assembly and threading process at each stage of the assembly to improve the efficiency of these operations, to study the power, accuracy and performance characteristics of the connections and to draw the conclusion that suggested the theory of assembly management is efficient. The following results are obtained. The article presents the analytical dependencies of the force indexes of threading in the course of the package and sheet assembly, including the tightening force while joining; the assembly of a multilayered package of dissimilar sheet materials was analyzed. On the basis of the theoretical analysis, the dependences of the power indices of threading during the package and sheet assembly were determined. The assembly of the package of sheet materials was investigated, including a multilayered package of dissimilar materials of a “metal-plastic” type. Conclusions. The process of assembling threaded joints with the use of management principles was used; these principles enable increasing the efficiency of the assembly process, reducing the complexity of the basic operations, and improving the quality of the joints obtained. The use adaptive control of the screwing speed on the main threading transitions is suggested for reducing the torque.  The technology of making threaded joints with given properties is developed, the main ways of increasing the efficiency of assembly and threading processes are determined on the basis of the integrated control system for the assembly process.

Threaded cognition : An integrated theory of concurrent multitasking

NARCIS (Netherlands)

Salvucci, Dario D.; Taatgen, Niels A.

The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking-that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed

Determination of the Tapping Part Diameter of the Thread Mill

Directory of Open Access Journals (Sweden)

A. E. Dreval'

2015-01-01

Full Text Available Currently, there is a tendency to increase the proportion of thread milling operations, among other ways of tapping, which is associated with increasing number of CNC machines, flexibility and versatility of the process.Developments presently existing in the RF and used in the thread mills deal, mainly, with the thread milling cutter designs, to process internal and external thread with straight flutes made from high-speed steel.The paper presents a technique to calculate and select the initial design parameters, i.e. the external diameter of the tapping part of thread milling cutter, which is chosen as a basic computational design. The analysis of directories of tool companies containing foreign de-signs of solid thread end-milling cutters has shown that most of them rep-resent the thread cutter designs made of solid carbide. There are solid and interlocking side milling cutters, which use a tapping part both as a single-disk and as a multi-disk one; chip flutes are made to be both as direct and as screw; solid designs of cutters are made from carbide with a diameter of up to 20 ... 25 mm; thread cutters can be left- and right-hand cutting; Designs of the combined thread mills are proposed; internal channels are used for coolant supply.It is shown that the purpose of the external diameter of the tapping part of the thread mill should take into account the effect of the thread mill diameter on the milling process performance, precision of thread profile received, taper thread, tool strength, and the volume of flutes.The analysis has shown that when choosing the external diameter of the thread mill it worth taking its maximum diameter to improve the char-acteristics of the process under the restrictions imposed on the accuracy of the formed thread.

Bolt Thread Stress Optimization

DEFF Research Database (Denmark)

Pedersen, Niels Leergaard

2012-01-01

of threads and therefore indirectly the bolt fatigue life. The root shape is circular, and from shape optimization for minimum stress concentration it is well known that the circular shape is seldom optimal. An axisymmetric Finite Element (FE) formulation is used to analyze the bolted connection, and a study...... is performed to establish the need for contact modeling with regard to finding the correct stress concentration factor. Optimization is performed with a simple parameterization with two design variables. Stress reduction of up to 9% is found in the optimization process, and some similarities are found...... in the optimized designs leading to the proposal of a new standard. The reductions in the stress are achieved by rather simple changes made to the cutting tool....

Threaded Cognition: An Integrated Theory of Concurrent Multitasking

Science.gov (United States)

Salvucci, Dario D.; Taatgen, Niels A.

2008-01-01

The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual…

Linguistic Error Analysis on Students' Thesis Proposals

Science.gov (United States)

Pescante-Malimas, Mary Ann; Samson, Sonrisa C.

2017-01-01

This study identified and analyzed the common linguistic errors encountered by Linguistics, Literature, and Advertising Arts majors in their Thesis Proposal classes in the First Semester 2016-2017. The data were the drafts of the thesis proposals of the students from the three different programs. A total of 32 manuscripts were analyzed which was…

Thread-Skip: An Undefined Common Observation.

Science.gov (United States)

McDermott, Peter; Allan, William DE

When a screw-retained implant prosthesis is removed, a click is heard and a slight axial shift is felt, indicating the screw has been fully removed from the retaining thread. This common observation has never been described in the literature. This article describes the click, and it is proposed it be termed thread-skip.

CPC: programming with a massive number of lightweight threads

OpenAIRE

Kerneis, Gabriel; Chroboczek, Juliusz

2011-01-01

To appear in PLACES'11.; International audience; Threads are a convenient and modular abstraction for writing concurrent programs, but often fairly expensive. The standard alternative to threads, event-loop programming, allows much lighter units of concurrency, but leads to code that is difficult to write and even harder to understand. Continuation Passing C (CPC) is a translator that converts a program written in threaded style into a program written with events and native system threads, at...

Outcomes of polydioxanone knotless thread lifting for facial rejuvenation.

Science.gov (United States)

Suh, Dong Hye; Jang, Hee Won; Lee, Sang Jun; Lee, Won Seok; Ryu, Hwa Jung

2015-06-01

Thread lifting is a minimally invasive technique for facial rejuvenation. Various devices for thread lifting using polydioxanone (PDO) are popular in aesthetic clinics in Korea, but there have been a few studies regarding its use. To describe PDO thread and techniques adopted to counteract the descent and laxity of the face. A retrospective chart review was conducted over a 24-month period. A total of 31 thread lifting procedures were performed. On each side, 5 bidirectional cog threads were used in the procedure for the flabby skin of the nasolabial folds. And, the procedure was performed on the marionette line using 2 twin threads. In most patients (87%), the results obtained were considered satisfactory. Consensus ratings by 2 physicians found that objective outcomes were divided among "excellent," "good," "fair," and "poor." Texture wise, the outcome ratings were 13 as excellent and 9 as good. Lifting wise, ratings were 11 as excellent and 6 as good. The incidence of complications was low and not serious. Facial rejuvenation using PDO thread is a safe and effective procedure associated with only minor complications when performed on patients with modest face sagging, fine wrinkles, and marked facial pores.

Method of measuring misalignment of welded threaded connections

Energy Technology Data Exchange (ETDEWEB)

Kasatkin, V I

1981-01-01

A method is presented for measuring misalignment of welded connections by special attachment, superposed indicator. Requirements are analyzed for welding the threaded sleeves established by specifications. It is shown that measurement of the slack only in one section on the selected base is insufficient for monitoring the geometry of the connected pipe parts. It is suggested that in order to evaluate the misalignment the concept of total slack be used and formulas are derived to define it.

Fabrication and Characterisation of Flexible Coaxial Thin Thread Supercapacitors

Directory of Open Access Journals (Sweden)

Fulian Qiu

2014-08-01

Full Text Available Flexible coaxial thin thread supercapacitors were fabricated semi-automatically using a dip coating method. A typical coaxial thin thread supercapacitor of a length of 70 cm demonstrated a specific length capacitance of 0.3 mF cm-1 (11.2 mF cm-2 and 2.18 F cm-3 at 5 mV s-1, the device exhibited good electrochemical performance with a high volume energy density of 0.22 mWh cm-3 at a power density of 22 mW cm-3. Thread supercapacitors were assembled in series and parallel combinations, the accepted models for series and parallel circuit combinations were obeyed for two coaxial thread supercapacitors. The thread shows high flexibility and uniformity of specific length capacitance, one integrated with a commercial solar cell could be charged and power a LED. The process is simple, robust and easy to scale up to make unlimited length thread supercapacitors for numerous miniaturized and flexible electronic applications.

Visual thread quality for precision miniature mechanisms

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1981-04-01

Threaded features have eight visual appearance factors which can affect their function in precision miniature mechanisms. The Bendix practice in deburring, finishing, and accepting these conditions on miniature threads is described as is their impact in assemblies of precision miniature electromechanical assemblies.

A multi-threading approach to secure VERIFYPIN

CSIR Research Space (South Africa)

Frieslaar, Ibraheem

2016-10-01

Full Text Available along side a pin-acceptance program in a multi-threaded environment. These threads are inserted randomly on each execution of the program to create confusion for the attacker. Moreover, the research proposes a more improved version of the pin...

Radiometric determination of uniformity of putting paraffin on textile threads

International Nuclear Information System (INIS)

Ridel', Z.; Kherrmann, Eh.; Shefer, I.; Tseiner, A.

1979-01-01

To improve processing of the natural and synthetic fiber threads on stocking-frames, they are treated by paraffin. Paraffin is applied in the amounts nearly equal to 0.1 -1.0 g for 10 4 m of the thread's length. To determine amount of paraffin on thread and to determine uniformity if its application, a radiometric method has been developed. As a radioactive label, didocilephosphate of rare earths was used. This compound has good solubility in hydrocarbons and does not change physical properties of paraffin in the investigated field of its application as well as its concentration. It is possible to add to paraffin this radioactive label or a non-active label with subsequent its activation. Amount of paraffin, applied on a thread is determined by means of measurement of activity of thread samples of different length. Information about uniformity of paraffin application on thread have been obtained by means of autoradiography. It has been found that paraffin in mainly applied on the thread's bulges [ru

Improved Fatigue Performance of Threaded Drillstring Connections by Cold Rolling

Energy Technology Data Exchange (ETDEWEB)

Kristoffersen, Steinar

2002-01-01

The research work presented in this thesis is concerned with analytical, numerical and experimental studies of the effect of cold rolling on the fatigue behaviour of threaded drillstring connections. A comprehensive literature study is made of the various effects on the fatigue behaviour of residual stresses introduced by mechanical deformation of notched components. Some of the effects studied are cyclic hardening behaviour after prestraining, cyclic creep, fatigue initiation in prestrained materials, short cracks and crack growth models including crack closure. Residual stresses were introduced in the surface of a smooth pipe by a rolling device to simulate a cold rolling process and verify the calculated residual stresses by measurements. Strain hardening and contact algorithm of the two bodies were incorporated in the FE analyses. Two significant errors were found in the commercial software package for residual stress evaluation, Restran v. 3.3.2a also called SINT, when using the Schajer method. The Schajer algorithm is the only hole-drilling algorithm without theoretical shortcomings, and is recommended when measuring large residual stress gradients in the depth direction. Using the Schajer method solved by in-house Matlab-routines good agreement between measured residual stress gradients and residual stress gradients from FE analyses was found. Full scale fatigue tests were performed on pipes cut from used drillstrings with notches of similar geometry as threads used in drillstring connections. The simulated threads consisted of four full depth helix notches with runouts at the surface. The pipe threads were cold rolled and fatigue tested in a full-scale four-point rotating bending fatigue testing rig. The test results showed that cold rolling had an effect on the crack initiation period. A major part of the fatigue life was with cracks observed at the notch root, but due to the increased fatigue crack propagation resistance the final fracture initiated at

Gold thread implantation promotes hair growth in human and mice

Science.gov (United States)

Kim, Jong-Hwan; Cho, Eun-Young; Kwon, Euna; Kim, Woo-Ho; Park, Jin-Sung; Lee, Yong-Soon

2017-01-01

Thread-embedding therapy has been widely applied for cosmetic purposes such as wrinkle reduction and skin tightening. Particularly, gold thread was reported to support connective tissue regeneration, but, its role in hair biology remains largely unknown due to lack of investigation. When we implanted gold thread and Happy Lift™ in human patient for facial lifting, we unexpectedly found an increase of hair regrowth in spite of no use of hair growth medications. When embedded into the depilated dorsal skin of mice, gold thread or polyglycolic acid (PGA) thread, similarly to 5% minoxidil, significantly increased the number of hair follicles on day 14 after implantation. And, hair re-growth promotion in the gold threadimplanted mice were significantly higher than that in PGA thread group on day 11 after depilation. In particular, the skin tissue of gold thread-implanted mice showed stronger PCNA staining and higher collagen density compared with control mice. These results indicate that gold thread implantation can be an effective way to promote hair re-growth although further confirmatory study is needed for more information on therapeutic mechanisms and long-term safety. PMID:29399026

Carbon Nanotube Thread Electrochemical Cell: Detection of Heavy Metals.

Science.gov (United States)

Zhao, Daoli; Siebold, David; Alvarez, Noe T; Shanov, Vesselin N; Heineman, William R

2017-09-19

In this work, all three electrodes in an electrochemical cell were fabricated based on carbon nanotube (CNT) thread. CNT thread partially insulated with a thin polystyrene coating to define the microelectrode area was used as the working electrode; bare CNT thread was used as the auxiliary electrode; and a micro quasi-reference electrode was fabricated by electroplating CNT thread with Ag and then anodizing it in chloride solution to form a layer of AgCl. The Ag|AgCl coated CNT thread electrode provided a stable potential comparable to the conventional liquid-junction type Ag|AgCl reference electrode. The CNT thread auxiliary electrode provided a stable current, which is comparable to a Pt wire auxiliary electrode. This all-CNT thread three electrode cell has been evaluated as a microsensor for the simultaneous determination of trace levels of heavy metal ions by anodic stripping voltammetry (ASV). Hg 2+ , Cu 2+ , and Pb 2+ were used as a representative system for this study. The calculated detection limits (based on the 3σ method) with a 120 s deposition time are 1.05, 0.53, and 0.57 nM for Hg 2+ , Cu 2+ , and Pb 2+ , respectively. These electrodes significantly reduce the dimensions of the conventional three electrode electrochemical cell to the microscale.

A Multi-threaded Version of Field II

DEFF Research Database (Denmark)

Jensen, Jørgen Arendt

2014-01-01

A multi-threaded version of Field II has been developed, which automatically can use the multi-core capabil- ities of modern CPUs. The memory allocation routines were rewritten to minimize the number of dynamic allocations and to make pre-allocations possible for each thread. This ensures...... that the simulation job can be automatically partitioned and the interdependence between threads minimized. The new code has been compared to Field II version 3.22, October 27, 2013 (latest free-ware version). A 64 element 5 MHz focused array transducer was simulated. One million point scatterers randomly distributed...... in a plane of 20 x 50 mm (width x depth) with random Gaussian amplitudes were simulated using the command calc scat . Dual Intel Xeon CPU E5-2630 2.60 GHz CPUs were used under Ubuntu Linux 10.02 and Matlab version 2013b. Each CPU holds 6 cores with hyper-threading, corresponding to a total of 24 hyper...

Multi-threaded software framework development for the ATLAS experiment

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00226135; Baines, John; Bold, Tomasz; Calafiura, Paolo; Dotti, Andrea; Farrell, Steven; Leggett, Charles; Malon, David; Ritsch, Elmar; Snyder, Scott; Tsulaia, Vakhtang; van Gemmeren, Peter; Wynne, Benjamin

2016-01-01

ATLAS's current software framework, Gaudi/Athena, has been very successful for the experiment in LHC Runs 1 and 2. However, its single threaded design has been recognised for some time to be increasingly problematic as CPUs have increased core counts and decreased available memory per core. Even the multi-process version of Athena, AthenaMP, will not scale to the range of architectures we expect to use beyond Run2. ATLAS examined the requirements on an updated multi-threaded framework and laid out plans for a new framework, including better support for high level trigger (HLT) use cases, in 2014. In this paper we report on our progress in developing the new multi-threaded task parallel extension of Athena, AthenaMT. Implementing AthenaMT has required many significant code changes. Progress has been made in updating key concepts of the framework, to allow the incorporation of different levels of thread safety in algorithmic code (from un-migrated thread-unsafe code, to thread safe copyable code to reentrant co...

Multi-threaded Software Framework Development for the ATLAS Experiment

CERN Document Server

Stewart, Graeme; The ATLAS collaboration; Baines, John; Calafiura, Paolo; Dotti, Andrea; Farrell, Steven; Leggett, Charles; Malon, David; Ritsch, Elmar; Snyder, Scott; Tsulaia, Vakhtang; van Gemmeren, Peter; Wynne, Benjamin

2016-01-01

ATLAS's current software framework, Gaudi/Athena, has been very successful for the experiment in LHC Runs 1 and 2. However, its single threaded design has been recognised for some time to be increasingly problematic as CPUs have increased core counts and decreased available memory per core. Even the multi-process version of Athena, AthenaMP, will not scale to the range of architectures we expect to use beyond Run2. ATLAS examined the requirements on an updated multi-threaded framework and layed out plans for a new framework, including better support for high level trigger (HLT) use cases, in 2014. In this paper we report on our progress in developing the new multi-threaded task parallel extension of Athena, AthenaMT. Implementing AthenaMT has required many significant code changes. Progress has been made in updating key concepts of the framework, to allow the incorporation of different levels of thread safety in algorithmic code (from un-migrated thread-unsafe code, to thread safe copyable code to reentrant c...

Thread selection according to predefined power characteristics during context switching on compute nodes

Science.gov (United States)

None, None

2013-06-04

Methods, apparatus, and products are disclosed for thread selection during context switching on a plurality of compute nodes that includes: executing, by a compute node, an application using a plurality of threads of execution, including executing one or more of the threads of execution; selecting, by the compute node from a plurality of available threads of execution for the application, a next thread of execution in dependence upon power characteristics for each of the available threads; determining, by the compute node, whether criteria for a thread context switch are satisfied; and performing, by the compute node, the thread context switch if the criteria for a thread context switch are satisfied, including executing the next thread of execution.

Nuclear reactor incorporating locking device for threaded bolt connections

International Nuclear Information System (INIS)

Blaushild, R.M.

1987-01-01

A nuclear reactor having a pressure vessel and a first element is described comprising a core barrel situated within the pressure vessel. The core barrel has a baffle former secured in and to the core barrel by bolted connections, and a second element comprising baffle plates secured to the inner surface of the baffle former by bolted connections, with a locking device to prevent loosening of bolted connections between the baffle former and at least one of the elements. The baffle former and at least one element are held together by a headed, threaded bolt engaged in a bore coaxially extending in the baffle former and at least one element and threadedly engaged in a threaded section in at least the baffle former. The threaded section has first threaded of a first direction, with the head of the bolt engaged with a shoulder about the bore in at least one element to hold the baffle formed and at least one element together, the head of the bolt having a first diameter and a cavity, having an unsymmetrical wall thereabout, in the end surface thereof. It comprises a recess in at least one element coaxial with the bore forming a wall thereabout and extending inwardly from the outer surface of at least one element, the recess having a second diameter greater than the first diameter, with at least one element having second threads in the wall of a direction opposite the direction of the first threads of the threaded bore; a locking nut having a base with a downwardly depending cylindrical wall thereabout

Self-cleaning threaded rod spinneret for high-efficiency needleless electrospinning

Science.gov (United States)

Zheng, Gaofeng; Jiang, Jiaxin; Wang, Xiang; Li, Wenwang; Zhong, Weizheng; Guo, Shumin

2018-07-01

High-efficiency production of nanofibers is the key to the application of electrospinning technology. This work focuses on multi-jet electrospinning, in which a threaded rod electrode is utilized as the needless spinneret to achieve high-efficiency production of nanofibers. A slipper block, which fits into and moves through the threaded rod, is designed to transfer polymer solution evenly to the surface of the rod spinneret. The relative motion between the slipper block and the threaded rod electrode promotes the instable fluctuation of the solution surface, thus the rotation of threaded rod electrode decreases the critical voltage for the initial multi-jet ejection and the diameter of nanofibers. The residual solution on the surface of threaded rod is cleaned up by the moving slipper block, showing a great self-cleaning ability, which ensures the stable multi-jet ejection and increases the productivity of nanofibers. Each thread of the threaded rod electrode serves as an independent spinneret, which enhances the electric field strength and constrains the position of the Taylor cone, resulting in high productivity of uniform nanofibers. The diameter of nanofibers decreases with the increase of threaded rod rotation speed, and the productivity increases with the solution flow rate. The rotation of electrode provides an excess force for the ejection of charged jets, which also contributes to the high-efficiency production of nanofibers. The maximum productivity of nanofibers from the threaded rod spinneret is 5-6 g/h, about 250-300 times as high as that from the single-needle spinneret. The self-cleaning threaded rod spinneret is an effective way to realize continuous multi-jet electrospinning, which promotes industrial applications of uniform nanofibrous membrane.

Thread angle dependency on flame spread shape over kenaf/polyester combined fabric

Science.gov (United States)

Azahari Razali, Mohd; Sapit, Azwan; Nizam Mohammed, Akmal; Nor Anuar Mohamad, Md; Nordin, Normayati; Sadikin, Azmahani; Faisal Hushim, Mohd; Jaat, Norrizam; Khalid, Amir

2017-09-01

Understanding flame spread behavior is crucial to Fire Safety Engineering. It is noted that the natural fiber exhibits different flame spread behavior than the one of the synthetic fiber. This different may influences the flame spread behavior over combined fabric. There is a research has been done to examined the flame spread behavior over kenaf/polyester fabric. It is seen that the flame spread shape is dependent on the thread angle dependency. However, the explanation of this phenomenon is not described in detail in that research. In this study, explanation about this phenomenon is given in detail. Results show that the flame spread shape is dependent on the position of synthetic thread. For thread angle, θ = 0°, the polyester thread is breaking when the flame approach to the thread and the kenaf thread tends to move to the breaking direction. This behavior produces flame to be ‘V’ shape. However, for thread angle, θ = 90°, the polyester thread melts while the kenaf thread decomposed and burned. At this angle, the distance between kenaf threads remains constant as flame approaches.

Environmentally acceptable thread compounds: Requirements defined

International Nuclear Information System (INIS)

Stringfellow, W.D.; Hendriks, R.V.; Jacobs, N.L.

1993-01-01

New environmental regulations on thread compounds are now being enforced in several areas with strong maritime tradition and a sensitive environment. These areas include Indonesia, Alaska and portions of Norway. The industry generally recognizes the environmental concerns but, with wider enforcement of regulations imminent, has not been able to define clearly the requirements for environmental compliance. This paper, written in collaboration with The Netherlands State Supervision of Mines, is based on the National Policy on Thread Compounds of The Netherlands. This national policy is representative of policies being followed by other North Sea governments. Similar policies might well be adopted by other governments worldwide. These policies will affect the operator, drilling contractor, and supplier. This paper provides a specific and detailed definition of thread compound requirements by addressing four relevant categories. The categories of interest are regulatory approval, environmental, health, and performance

Redoable Tie-Over Dressing Using Multiple Loop Silk Threads

Directory of Open Access Journals (Sweden)

Hyeon Jong Jo

2013-05-01

Full Text Available After skin grafting, to prevent hematoma or seroma collection at the graft site, a tie-over dressing has been commonly used. However, although the conventional tie-over dressing by suture is a useful method for securing a graft site, refixation is difficult when repeated tie-over dressing is needed. Therefore, we recommend a redoable tie-over dressing technique with multiple loops threads and connecting silk threads. After the raw surface of each of our cases was covered with a skin graft, multiple loop silk thread attached with nylon at the skin graft margin. We applied the ointment gauze and wet cotton/fluffy gauze over the skin graft, then fixed the dressing by connecting cross-counter multiple loop thread with connecting silk threads. When we opened the tie-over dressing by cutting the connecting silk threads, we repeated the tie-over dressing with the same method. The skin graft was taken successfully without hematoma or seroma collection or any other complications. In conclusion, we report a novel tie-over dressing enabling simple fixation of the dressing to maintain proper tension for wounds that require repetitive fixation. Further, with this reliable method, the skin grafts were well taken.

Redoable Tie-Over Dressing Using Multiple Loop Silk Threads

Directory of Open Access Journals (Sweden)

Hyeon Jong Jo

2013-05-01

Full Text Available After skin grafting, to prevent hematoma or seroma collection at the graft site, a tie-over dressing has been commonly used. However, although the conventional tie-over dressing by suture is a useful method for securing a graft site, refixation is difficult when repeated tieover dressing is needed. Therefore, we recommend a redoable tie-over dressing technique with multiple loops threads and connecting silk threads. After the raw surface of each of our cases was covered with a skin graft, multiple loop silk thread attached with nylon at the skin graft margin. We applied the ointment gauze and wet cotton/fluffy gauze over the skin graft, then fixed the dressing by connecting cross-counter multiple loop thread with connecting silk threads. When we opened the tie-over dressing by cutting the connecting silk threads, we repeated the tie-over dressing with the same method. The skin graft was taken successfully without hematoma or seroma collection or any other complications. In conclusion, we report a novel tie-over dressing enabling simple fixation of the dressing to maintain proper tension for wounds that require repetitive fixation. Further, with this reliable method, the skin grafts were well taken.

ADVANCED SCHEDULER FOR COOPERATIVE EXECUTION OF THREADS ON MULTI-CORE SYSTEM

Directory of Open Access Journals (Sweden)

O. N. Karasik

2017-01-01

Full Text Available Three architectures of the cooperative thread scheduler in a multithreaded application that is executed on a multi-core system are considered. Architecture A0 is based on the synchronization and scheduling facilities, which are provided by the operating system. Architecture A1 introduces a new synchronization primitive and a single queue of the blocked threads in the scheduler, which reduces the interaction activity between the threads and operating system, and significantly speed up the processes of blocking and unblocking the threads. Architecture A2 replaces the single queue of blocked threads with dedicated queues, one for each of the synchronizing primitives, extends the number of internal states of the primitive, reduces the inter- dependence of the scheduling threads, and further significantly speeds up the processes of blocking and unblocking the threads. All scheduler architectures are implemented on Windows operating systems and based on the User Mode Scheduling. Important experimental results are obtained for multithreaded applications that implement two blocked parallel algorithms of solving the linear algebraic equation systems by the Gaussian elimination. The algorithms differ in the way of the data distribution among threads and by the thread synchronization models. The number of threads varied from 32 to 7936. Architecture A1 shows the acceleration of up to 8.65% and the architecture A2 shows the acceleration of up to 11.98% compared to A0 architecture for the blocked parallel algorithms computing the triangular form and performing the back substitution. On the back substitution stage of the algorithms, architecture A1 gives the acceleration of up to 125%, and architecture A2 gives the acceleration of up to 413% compared to architecture A0. The experiments clearly show that the proposed architectures, A1 and A2 outperform A0 depending on the number of thread blocking and unblocking operations, which happen during the execution of

Do dual-thread orthodontic mini-implants improve bone/tissue mechanical retention?

Science.gov (United States)

Lin, Yang-Sung; Chang, Yau-Zen; Yu, Jian-Hong; Lin, Chun-Li

2014-12-01

The aim of this study was to understand whether the pitch relationship between micro and macro thread designs with a parametrical relationship in a dual-thread mini-implant can improve primary stability. Three types of mini-implants consisting of single-thread (ST) (0.75 mm pitch in whole length), dual-thread A (DTA) with double-start 0.375 mm pitch, and dual-thread B (DTB) with single-start 0.2 mm pitch in upper 2-mm micro thread region for performing insertion and pull-out testing. Histomorphometric analysis was performed in these specimens in evaluating peri-implant bone defects using a non-contact vision measuring system. The maximum inserted torque (Tmax) in type DTA was found to be the smallest significantly, but corresponding values found no significant difference between ST and DTB. The largest pull-out strength (Fmax) in the DTA mini-implant was found significantly greater than that for the ST mini-implant regardless of implant insertion orientation. Mini-implant engaged the cortical bone well as observed in ST and DTA types. Dual-thread mini-implant with correct micro thread pitch (parametrical relationship with macro thread pitch) in the cortical bone region can improve primary stability and enhanced mechanical retention.

Development of Thread-compatible Open Source Stack

Science.gov (United States)

Zimmermann, Lukas; Mars, Nidhal; Schappacher, Manuel; Sikora, Axel

2017-07-01

The Thread protocol is a recent development based on 6LoWPAN (IPv6 over IEEE 802.15.4), but with extensions regarding a more media independent approach, which - additionally - also promises true interoperability. To evaluate and analyse the operation of a Thread network a given open source 6LoWPAN stack for embedded devices (emb::6) has been extended in order to comply with the Thread specification. The implementation covers Mesh Link Establishment (MLE) and network layer functionality as well as 6LoWPAN mesh under routing mechanism based on MAC short addresses. The development has been verified on a virtualization platform and allows dynamical establishment of network topologies based on Thread’s partitioning algorithm.

Security threads: effective security devices in the past, present, and future

Science.gov (United States)

Wolpert, Gary R.

2002-04-01

Security threads were first used to secure banknotes in the mid 1800's. The key to their anti-counterfeiting success was the fact that by being embedded in the paper, they became an integral part of the banknote substrate. Today, all major currencies still utilize this effective security feature. Technological developments have allowed security threads to evolve from a feature authenticated by only visual means to devices that incorporate both visual and machine detectable components. When viewed from the perspective of a thread being a carrier of various security technologies and the fact that they can be incorporated into the core substrate of banknotes, documents, labels, packaging and some high valued articles, it is clear that security threads will remain as effective security devices well into the future. This paper discusses a brief historical background of security threads, current visual and machine authentication technologies incorporated into threads today and a look to the future of threads as effective security devices.

Ion beam analysis of golden threads from Romanian medieval textiles

International Nuclear Information System (INIS)

Balta, Z.I.; Csedreki, L.; Furu, E.; Cretu, I.; Huszánk, R.; Lupu, M.; Török, Z.; Kertész, Z.; Szikszai, Z.

2015-01-01

In this study, metal threads from Romanian religious embroideries and precious velvet brocades dated from 15th to 18th century were analyzed by using IBA methods (PIXE and RBS) which, in comparison to the traditional analytical techniques (XRF, EDS), allowed the detection of their structures and accurate identification of the trace elements (detection limits of few tens of ppm). PIXE results confirmed that both types of the metal threads studied – wires and strips – have layered structures being made of fine silver, refined by cupellation, and gilded most probably with pure gold, and not of Au–Ag alloy, or gilded Ag–Cu alloy or Au–Ag–Cu alloy, as resulted from the previously performed SEM-EDS analysis. Trace elements of historical interest like lead, mercury and bismuth have been also possible to be detected by PIXE. The resulting elemental maps allowed us to identify the areas from which the metal thread structure and quantitative composition could be accurately determined. RBS measurements revealed that the gilding layer is separated from the silver bulk by an interface layer resulting through atomic diffusion of silver into the gold, which lead to the conclusion that the methods used for gilding were probably either the diffusion bonding or the fire gilding. The gilding layers thicknesses were estimated by PIXE with the GUPIX software and also determined from RBS measurements

Ion beam analysis of golden threads from Romanian medieval textiles

Energy Technology Data Exchange (ETDEWEB)

Balta, Z.I., E-mail: balta_z_i@yahoo.com [National History Museum of Romania, Calea Victoriei 12, Sector 3, Bucharest (Romania); Csedreki, L.; Furu, E. [Institute for Nuclear Research, Hungarian Academy of Sciences, H-4001 Debrecen, P.O. Box 51 (Hungary); Cretu, I. [National Art Museum of Romania, Calea Victoriei 49-53, Sector 1, Bucharest (Romania); Huszánk, R. [Institute for Nuclear Research, Hungarian Academy of Sciences, H-4001 Debrecen, P.O. Box 51 (Hungary); Lupu, M. [National Art Museum of Romania, Calea Victoriei 49-53, Sector 1, Bucharest (Romania); Török, Z.; Kertész, Z.; Szikszai, Z. [Institute for Nuclear Research, Hungarian Academy of Sciences, H-4001 Debrecen, P.O. Box 51 (Hungary)

2015-04-01

In this study, metal threads from Romanian religious embroideries and precious velvet brocades dated from 15th to 18th century were analyzed by using IBA methods (PIXE and RBS) which, in comparison to the traditional analytical techniques (XRF, EDS), allowed the detection of their structures and accurate identification of the trace elements (detection limits of few tens of ppm). PIXE results confirmed that both types of the metal threads studied – wires and strips – have layered structures being made of fine silver, refined by cupellation, and gilded most probably with pure gold, and not of Au–Ag alloy, or gilded Ag–Cu alloy or Au–Ag–Cu alloy, as resulted from the previously performed SEM-EDS analysis. Trace elements of historical interest like lead, mercury and bismuth have been also possible to be detected by PIXE. The resulting elemental maps allowed us to identify the areas from which the metal thread structure and quantitative composition could be accurately determined. RBS measurements revealed that the gilding layer is separated from the silver bulk by an interface layer resulting through atomic diffusion of silver into the gold, which lead to the conclusion that the methods used for gilding were probably either the diffusion bonding or the fire gilding. The gilding layers thicknesses were estimated by PIXE with the GUPIX software and also determined from RBS measurements.

Threaded cognition: an integrated theory of concurrent multitasking.

Science.gov (United States)

Salvucci, Dario D; Taatgen, Niels A

2008-01-01

The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual and motor resources). The theory specifies a parsimonious mechanism that allows for concurrent execution, resource acquisition, and resolution of resource conflicts, without the need for specialized executive processes. By instantiating this mechanism as a computational model, threaded cognition provides explicit predictions of how multitasking behavior can result in interference, or lack thereof, for a given set of tasks. The authors illustrate the theory in model simulations of several representative domains ranging from simple laboratory tasks such as dual-choice tasks to complex real-world domains such as driving and driver distraction. (c) 2008 APA, all rights reserved

Method for reinforcing threads in multilayer composite tubes and cylindrical structures

International Nuclear Information System (INIS)

Romanoski, G.R.; Burchell, T.D.

1996-01-01

Multilayer techniques such as: tape wrapping, braiding, and filament winding represent versatile and economical routes for fabricating composite tubes and cylindrical structures. However, multilayer architectures lack the radial reinforcement required to retain threads when the desired means of connection or closure is a threaded joint. This issue was addressed in the development of a filament wound, carbon-carbon composite impact shell for the NASA radioisotope thermoelectric generator. The problem of poor thread shear strength was solved by incorporating a number of radial elements of triangular geometry around the circumference of the thread for the full length of thread engagement. The radial elements significantly increased the shear strength of the threaded joint by transmitting the applied force to the balance of composite structure. This approach is also applicable to ceramic composites

Diagnostics of the wheel thread of railway rolling stock

Directory of Open Access Journals (Sweden)

S. Yu. Buryak

2013-02-01

Full Text Available Purpose. At present, the devastating impact of faulty wheels on rails on the move is a major problem of railway transport. This factor is one of the most important, which causes the shift from traditional manual methods of verification and external examination to the automated diagnostic system of rolling stock in operation. Methodology. To achieve this goal the main types of wheel damages and the way they appear are analyzed. The methods for defects and abnormalities of the wheel thread determining as well as their advantages and disadvantages were presented. Nowadays these methods are under usage in both the international practice and in the one of the CIS countries. Findings. The faulty wheel sound on the move was researched and analyzed. The necessity of using the automated system, enabling one to reduce significantly the human factor is substantiated. Originality. The method to determine the wheel thread damage on the basis of a sound diagnostic is proposed. Practical value. Automatic tracking system of the wheels condition allows performing their more qualitative diagnostics, detecting a fault at the early stage and forecasting the rate of its extension. Besides detecting the location of the faulty wheel in the rolling stock, it is also possible to trace the dynamics of the fault extension and to give the recommendations on how to eliminate it.

Dynamic thread assignment in web server performance optimization

NARCIS (Netherlands)

van der Weij, W.; Bhulai, S.; van der Mei, R.D.

2009-01-01

Popular web sites are expected to handle huge number of requests concurrently within a reasonable time frame. The performance of these web sites is largely dependent on effective thread management of their web servers. Although the implementation of static and dynamic thread policies is common

Performance improvement of developed program by using multi-thread technique

Directory of Open Access Journals (Sweden)

Surasak Jabal

2015-03-01

Full Text Available This research presented how to use a multi-thread programming technique to improve the performance of a program written by Windows Presentation Foundation (WPF. The Computer Assisted Instruction (CAI software, named GAME24, was selected to use as a case study. This study composed of two main parts. The first part was about design and modification of the program structure upon the Object Oriented Programing (OOP approach. The second part was about coding the program using the multi-thread technique which the number of threads were based on the calculated Catalan number. The result showed that the multi-thread programming technique increased the performance of the program 44%-88% compared to the single-thread technique. In addition, it has been found that the number of cores in the CPU also increase the performance of multithreaded program proportionally.

Creating and improving multi-threaded Geant4

CERN Document Server

Dong, Xin; Apostolakis, John; Jarp, Sverre; Nowak, Andrzej; Asai, Makoto; Brandt, Daniel

2012-01-01

We document the methods used to create the multi-threaded prototype Geant4MT from a sequential version of Geant4. We cover the Source-to-Source transformations applied, and discuss the process of verifying the correctness of the Geant4MT toolkit and applications based on it. Tools to ensure that the results of a transformed multi-threaded application are exactly equal to the original sequential version are under development. Stand-alone or simple applications can be adapted within 1-2 working days. Geant4MT is shown to scale linearly on an 80-core computer. In the special case of a single worker thread on one core, 30% overhead has been observed. We explain the reasons for this and the improvements introduced to reduce this overhead.

UTLEON3 Exploring Fine-Grain Multi-Threading in FPGAs

CERN Document Server

Daněk, Martin; Kohout, Lukáš; Sýkora, Jaroslav; Bartosinski, Roman

2013-01-01

This book describes a specification, microarchitecture, VHDL implementation and evaluation of a SPARC v8 CPU with fine-grain multi-threading, called micro-threading. The CPU, named UTLEON3, is an alternative platform for exploring CPU multi-threading that is compatible with the industry-standard GRLIB package. The processor microarchitecture was designed to map in an efficient way the data-flow scheme on a classical von Neumann pipelined processing used in common processors, while retaining full binary compatibility with existing legacy programs.  Describes and documents a working SPARC v8, with fine-grain multithreading and fast context switch; Provides VHDL sources for the described processor; Describes a latency-tolerant framework for coupling hardware accelerators to microthreaded processor pipelines; Includes programming by example in the micro-threaded assembly language.    

Threaded-fastener experience in nuclear power plants

International Nuclear Information System (INIS)

Koo, W.H.

1983-01-01

This report identifies 44 incidents of threaded-fastener degradation and failure in nuclear power plants from October 1964 to March 1982. It provides an overview of some of the threaded-fastener problems that have occurred since 1964. Safety implications of these incidents are discussed, and short-term regulatory actions and ongoing long-term regulatory actions are described. Information included in this report represents the current NRC staff understanding of each issue

Real-time SHVC software decoding with multi-threaded parallel processing

Science.gov (United States)

Gudumasu, Srinivas; He, Yuwen; Ye, Yan; He, Yong; Ryu, Eun-Seok; Dong, Jie; Xiu, Xiaoyu

2014-09-01

This paper proposes a parallel decoding framework for scalable HEVC (SHVC). Various optimization technologies are implemented on the basis of SHVC reference software SHM-2.0 to achieve real-time decoding speed for the two layer spatial scalability configuration. SHVC decoder complexity is analyzed with profiling information. The decoding process at each layer and the up-sampling process are designed in parallel and scheduled by a high level application task manager. Within each layer, multi-threaded decoding is applied to accelerate the layer decoding speed. Entropy decoding, reconstruction, and in-loop processing are pipeline designed with multiple threads based on groups of coding tree units (CTU). A group of CTUs is treated as a processing unit in each pipeline stage to achieve a better trade-off between parallelism and synchronization. Motion compensation, inverse quantization, and inverse transform modules are further optimized with SSE4 SIMD instructions. Simulations on a desktop with an Intel i7 processor 2600 running at 3.4 GHz show that the parallel SHVC software decoder is able to decode 1080p spatial 2x at up to 60 fps (frames per second) and 1080p spatial 1.5x at up to 50 fps for those bitstreams generated with SHVC common test conditions in the JCT-VC standardization group. The decoding performance at various bitrates with different optimization technologies and different numbers of threads are compared in terms of decoding speed and resource usage, including processor and memory.

Number of objectives and conclusions in dissertations and thesis

Directory of Open Access Journals (Sweden)

Liebano Richard Eloin

2005-01-01

Full Text Available PURPOSE: To analyze the number of objectives and conclusions presented in dissertations and thesis defended at Federal University of São Paulo - Paulista School of Medicine (UNIFESP - EPM. METHODS: It was realized a search in the master degree dissertations and doctor degree thesis defended at Federal University of São Paulo - Paulista School of Medicine in the years 2002 and 2003 that were found available in the central library of this university. RESULTS: From 723 master dissertations analyzed, 62 (8,57% presented only one objective and one conclusion, 134 (18,53% presented one objective and more than one conclusion and 527 (72,89% had more than one objective and more than one conclusion. From 502 doctor thesis analyzed, 23 (4,58% presented only one objective and one conclusion, 123 (24,50% presented one objective and more than one conclusion and 376 (74,90% had more than one objective and more than one conclusion.. CONCLUSIONS: It wasn't found in researched literature the number of objectives and conclusions a scientific work must have. A highest number of thesis and dissertations presented more than one objective and more than one conclusion.

High efficiency carbon nanotube thread antennas

Science.gov (United States)

Amram Bengio, E.; Senic, Damir; Taylor, Lauren W.; Tsentalovich, Dmitri E.; Chen, Peiyu; Holloway, Christopher L.; Babakhani, Aydin; Long, Christian J.; Novotny, David R.; Booth, James C.; Orloff, Nathan D.; Pasquali, Matteo

2017-10-01

Although previous research has explored the underlying theory of high-frequency behavior of carbon nanotubes (CNTs) and CNT bundles for antennas, there is a gap in the literature for direct experimental measurements of radiation efficiency. These measurements are crucial for any practical application of CNT materials in wireless communication. In this letter, we report a measurement technique to accurately characterize the radiation efficiency of λ/4 monopole antennas made from the CNT thread. We measure the highest absolute values of radiation efficiency for CNT antennas of any type, matching that of copper wire. To capture the weight savings, we propose a specific radiation efficiency metric and show that these CNT antennas exceed copper's performance by over an order of magnitude at 1 GHz and 2.4 GHz. We also report direct experimental observation that, contrary to metals, the radiation efficiency of the CNT thread improves significantly at higher frequencies. These results pave the way for practical applications of CNT thread antennas, particularly in the aerospace and wearable electronics industries where weight saving is a priority.

Opinions of Students Completing Master Thesis in Turkish Education Field about Academic Writing and Thesis Formation Process

Directory of Open Access Journals (Sweden)

Mustafa Onur KAN

2016-12-01

Full Text Available The overall aim of this research is to evaluate opinions of students completing master thesis in the field of Turkish education about academic writing and process of forming thesis. The study has been devised using phenomenological design within the qualitative research methods. The study group of research is consisted of 9 participants completed master thesis in the field of Turkish education at Mustafa Kemal University Instıtute of Social Sciences in 2015. In this study, semi-structured interview form developed by the researcher was used to collect data. In order to ensure the reliability of the scope and structure, table of specification was constituted and expert views were consulted. For analyzing data descriptive analysis method was used. According to results of the research, it was obtained that participants experience various diffuculties in writing the basic sections of the thesis. In addition, it was seen that participants can not benefit enough from the studies written in foreign language. Participants reported that they find themselves more enough about academic writing and process of forming thesis after postgraduate education, but also they stated that academic writing courses should take part in program.

Servicing a globally broadcast interrupt signal in a multi-threaded computer

Science.gov (United States)

Attinella, John E.; Davis, Kristan D.; Musselman, Roy G.; Satterfield, David L.

2015-12-29

Methods, apparatuses, and computer program products for servicing a globally broadcast interrupt signal in a multi-threaded computer comprising a plurality of processor threads. Embodiments include an interrupt controller indicating in a plurality of local interrupt status locations that a globally broadcast interrupt signal has been received by the interrupt controller. Embodiments also include a thread determining that a local interrupt status location corresponding to the thread indicates that the globally broadcast interrupt signal has been received by the interrupt controller. Embodiments also include the thread processing one or more entries in a global interrupt status bit queue based on whether global interrupt status bits associated with the globally broadcast interrupt signal are locked. Each entry in the global interrupt status bit queue corresponds to a queued global interrupt.

Permission-based separation logic for multi-threaded Java programs

NARCIS (Netherlands)

Amighi, A.; Haack, Christian; Huisman, Marieke; Hurlin, C.

This paper presents a program logic for reasoning about multithreaded Java-like programs with concurrency primitives such as dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of concurrent

Collaborative learning using VoiceThread in an online graduate course

Directory of Open Access Journals (Sweden)

Yu-Hui Ching

2013-09-01

Full Text Available Collaborative learning enables participants in a learning community to externalize and share knowledge, experiences, and practice. However, collaborative learning in an online environment can be challenging due to the lack of face-to face interaction. This current study examined twenty graduate students’ experiences of using VoiceThread for a collaborative activity in an entirely online course to explore students’ perceptions of using multi-modal communication for collaboration and knowledge sharing. The results of this study revealed that graduate students had very positive experiences toward using VoiceThread for collaborative learning. The participants found VoiceThread easy to learn and use, and reported that audio and video interaction on VoiceThread helped connect them with their peers. More than half of the participants interacted with peers using audio, followed by text and then by video. Half of the students felt they were more connected to peers; however, feeling more connected did not result in more participation as most of the students only participated at the level that met the course requirement. Participants identified benefits and drawbacks of using VoiceThread for collaboration as compared to using text-based discussion forums. The most frequently mentioned benefit of using VoiceThread for collaboration exemplifies its multi-modal affordance that enables learners to communicate emotion, personality, and other non-verbal cues conducive to better understanding and interpretation of meanings. About half of the participants indicated that they preferred VoiceThread to text-based discussion forums for collaborative learning activity. Challenges and implications for future research are also discussed.

Missing IUD Despite Threads at the Cervix

Directory of Open Access Journals (Sweden)

Andrew L. Atkinson

2014-01-01

Full Text Available Today, the intrauterine device (IUD is by far the most popular form of long term reversible contraception in the world. Side effects from the IUD are minimal and complications are rare. Uterine perforation and migration of the IUD outside the uterine cavity are the most serious complications. Physician visualization and/or the patient feeling retrieval threads at the cervical os are confirmation that the IUD has not been expelled or migrated. We present a case of a perforated, intraperitoneal IUD with threads noted at the cervical os. Office removal was not possible using gentle traction on the threads. Multiple imaging and endoscopic modalities were used to try and locate the IUD including pelvic ultrasound, diagnostic hysteroscopy, cystoscopy, and pelvic magnetic resonance imaging (MRI. The studies gave conflicting results on location of the IUD. Ultimately, the missing IUD was removed via laparoscopy.

Dependence of the length of solar filament threads on the magnetic configuration

International Nuclear Information System (INIS)

Zhou Yu-Hao; Chen Peng-Fei; Fang Cheng; Zhang Qing-Min

2014-01-01

High-resolution Hα observations indicate that filaments consist of an assembly of thin threads. In quiescent filaments, the threads are generally short, whereas in active region filaments, the threads are generally long. In order to explain these observational features, we performed one-dimensional radiative hydrodynamic simulations of filament formation along a dipped magnetic flux tube in the framework of the chromospheric evaporation-coronal condensation model. The geometry of a dipped magnetic flux tube is characterized by three parameters, i.e., the depth (D), the half-width (w) and the altitude (h) of the magnetic dip. A survey of the parameters in numerical simulations shows that when allowing the filament thread to grow in 5 days, the maximum length (L th ) of the filament thread increases linearly with w, and decreases linearly with D and h. The dependence is fitted into a linear function L th = 0.84w − 0.88D − 2.78h+17.31(Mm). Such a relation can qualitatively explain why quiescent filaments have shorter threads and active region filaments have longer threads

The mathematical model of thread unrolling from a bobbin

Directory of Open Access Journals (Sweden)

S. M. Tenenbaum

2014-01-01

Full Text Available I. Introduction The subject of research in this work is a process of thread unrolling from a bobbin. The mathematical model of this process considering motion of thread peace on a bobbin and unrolled peace is proposed. The dimension of system of differential equations for this model is constant during deploying.The relevance to simulate this process for design of Heliogyro-like solar sails (Heliogyro [1], BMSTU-Sail [2] is proved. The paper briefly characterizes a blade for such solar sail as a simulation object. It proves the possibility for using a flexible thread model for a long blade because of very small blade thickness (less than 10 μm [3] relative to blade width and the phenomena of Koriolis forces [4] that lead to buckling failure of blade flatness.The major features of the proposed model are:-- simulated as a motion of the thread piece both being on a bobbin and its unrolled peace;-- splitting a thread length into nodes does not depend on the demand to ensure a sufficient number of nodes on a single thread turn on the coil;-- because of avoiding a problem of contact between the thread and bobbin a stable integration of motion equations is provided by the conventional Runge-Kutta method of fourth order with a constant step [5];-- in the course of solution the number of freedom degrees (number of motion equation is constant, thereby simplifying a calculation algorithm.The closest mathematical model is proposed in [6].The scientific novelty of this research is the approach to solving the problem of unrolling thread from a bobbin using a constant number of motion equations while preserving real kinematics coiling process.II. Problem formulationIn this section the problem of unrolling thread with length L from a bobbin of radius r is posed while any kind of forces are acting on the unrolled peace of thread. Moreover, the law of bobbin rotation φ(t assumed to be known with the proviso that the model can be modified if φ(t is the result of

VoiceThread as a Peer Review and Dissemination Tool for Undergraduate Research

Science.gov (United States)

Guertin, L. A.

2012-12-01

VoiceThread has been utilized in an undergraduate research methods course for peer review and final research project dissemination. VoiceThread (http://www.voicethread.com) can be considered a social media tool, as it is a web-based technology with the capacity to enable interactive dialogue. VoiceThread is an application that allows a user to place a media collection online containing images, audio, videos, documents, and/or presentations in an interface that facilitates asynchronous communication. Participants in a VoiceThread can be passive viewers of the online content or engaged commenters via text, audio, video, with slide annotations via a doodle tool. The VoiceThread, which runs across browsers and operating systems, can be public or private for viewing and commenting and can be embedded into any website. Although few university students are aware of the VoiceThread platform (only 10% of the students surveyed by Ng (2012)), the 2009 K-12 edition of The Horizon Report (Johnson et al., 2009) lists VoiceThread as a tool to watch because of the opportunities it provides as a collaborative learning environment. In Fall 2011, eleven students enrolled in an undergraduate research methods course at Penn State Brandywine each conducted their own small-scale research project. Upon conclusion of the projects, students were required to create a poster summarizing their work for peer review. To facilitate the peer review process outside of class, each student-created PowerPoint file was placed in a VoiceThread with private access to only the class members and instructor. Each student was assigned to peer review five different student posters (i.e., VoiceThread images) with the audio and doodle tools to comment on formatting, clarity of content, etc. After the peer reviews were complete, the students were allowed to edit their PowerPoint poster files for a new VoiceThread. In the new VoiceThread, students were required to video record themselves describing their research

Gold thread implantation promotes hair growth in human and mice

OpenAIRE

Kim, Jong-Hwan; Cho, Eun-Young; Kwon, Euna; Kim, Woo-Ho; Park, Jin-Sung; Lee, Yong-Soon; Yun, Jun-Won; Kang, Byeong-Cheol

2017-01-01

Thread-embedding therapy has been widely applied for cosmetic purposes such as wrinkle reduction and skin tightening. Particularly, gold thread was reported to support connective tissue regeneration, but, its role in hair biology remains largely unknown due to lack of investigation. When we implanted gold thread and Happy Lift™ in human patient for facial lifting, we unexpectedly found an increase of hair regrowth in spite of no use of hair growth medications. When embedded into the depilated...

A Review of Lightweight Thread Approaches for High Performance Computing

Energy Technology Data Exchange (ETDEWEB)

Castello, Adrian; Pena, Antonio J.; Seo, Sangmin; Mayo, Rafael; Balaji, Pavan; Quintana-Orti, Enrique S.

2016-09-12

High-level, directive-based solutions are becoming the programming models (PMs) of the multi/many-core architectures. Several solutions relying on operating system (OS) threads perfectly work with a moderate number of cores. However, exascale systems will spawn hundreds of thousands of threads in order to exploit their massive parallel architectures and thus conventional OS threads are too heavy for that purpose. Several lightweight thread (LWT) libraries have recently appeared offering lighter mechanisms to tackle massive concurrency. In order to examine the suitability of LWTs in high-level runtimes, we develop a set of microbenchmarks consisting of commonlyfound patterns in current parallel codes. Moreover, we study the semantics offered by some LWT libraries in order to expose the similarities between different LWT application programming interfaces. This study reveals that a reduced set of LWT functions can be sufficient to cover the common parallel code patterns and that those LWT libraries perform better than OS threads-based solutions in cases where task and nested parallelism are becoming more popular with new architectures.

Loosening and damage mechanism of thread-joined structures in nuclear power equipment

International Nuclear Information System (INIS)

Tang Hui

1999-01-01

The author proposes a loosening mechanism of thread-joined structures under vibrate environments in the nuclear power equipment and structures, which is on the base of the macro and imperceptible-mechanics analysis. It has answered the problems on the seizing, the adhesive wearing, the generation of cracks, the thread-tooth fracture. So it has a conclusion that the loosening of thread-joined structures is essential trend, in other words, the locking property of thread-pair is failure under vibrate environments

Exploiting Thread Parallelism for Ocean Modeling on Cray XC Supercomputers

Energy Technology Data Exchange (ETDEWEB)

Sarje, Abhinav [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jacobsen, Douglas W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Williams, Samuel W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ringler, Todd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-05-01

The incorporation of increasing core counts in modern processors used to build state-of-the-art supercomputers is driving application development towards exploitation of thread parallelism, in addition to distributed memory parallelism, with the goal of delivering efficient high-performance codes. In this work we describe the exploitation of threading and our experiences with it with respect to a real-world ocean modeling application code, MPAS-Ocean. We present detailed performance analysis and comparisons of various approaches and configurations for threading on the Cray XC series supercomputers.

Argobots: A Lightweight Low-Level Threading and Tasking Framework

Energy Technology Data Exchange (ETDEWEB)

Seo, Sangmin; Amer, Abdelhalim; Balaji, Pavan; Bordage, Cyril; Bosilca, George; Brooks, Alex; Carns, Philip; Castello, Adrian; Genet, Damien; Herault, Thomas; Iwasaki, Shintaro; Jindal, Prateek; Kale, Laxmikant V.; Krishnamoorthy, Sriram; Lifflander, Jonathan; Lu, Huiwei; Meneses, Esteban; Snir, Marc; Sun, Yanhua; Taura, Kenjiro; Beckman, Pete

2018-03-01

In the past few decades, a number of user-level threading and tasking models have been proposed in the literature to address the shortcomings of OS-level threads, primarily with respect to cost and flexibility. Current state-of-the-art user-level threading and tasking models, however, either are too specific to applications or architectures or are not as powerful or flexible. In this paper, we present Argobots, a lightweight, low-level threading and tasking framework that is designed as a portable and performant substrate for high-level programming models or runtime systems. Argobots offers a carefully designed execution model that balances generality of functionality with providing a rich set of controls to allow specialization by end users or high-level programming models. We describe the design, implementation, and performance characterization of Argobots and present integrations with three high-level models: OpenMP, MPI, and colocated I/O services. Evaluations show that (1) Argobots, while providing richer capabilities, is competitive with existing simpler generic threading runtimes; (2) our OpenMP runtime offers more efficient interoperability capabilities than production OpenMP runtimes do; (3) when MPI interoperates with Argobots instead of Pthreads, it enjoys reduced synchronization costs and better latency-hiding capabilities; and (4) I/O services with Argobots reduce interference with colocated applications while achieving performance competitive with that of a Pthreads approach.

Argobots: A Lightweight Low-Level Threading and Tasking Framework

International Nuclear Information System (INIS)

Seo, Sangmin; Amer, Abdelhalim; Balaji, Pavan; Bordage, Cyril; Bosilca, George

2017-01-01

In the past few decades, a number of user-level threading and tasking models have been proposed in the literature to address the shortcomings of OS-level threads, primarily with respect to cost and flexibility. Current state-of-the-art user-level threading and tasking models, however, are either too specific to applications or architectures or are not as powerful or flexible. In this article, we present Argobots, a lightweight, low-level threading and tasking framework that is designed as a portable and performant substrate for high-level programming models or runtime systems. Argobots offers a carefully designed execution model that balances generality of functionality with providing a rich set of controls to allow specialization by the user or high-level programming model. Here, we describe the design, implementation, and optimization of Argobots and present integrations with three example high-level models: OpenMP, MPI, and co-located I/O service. Evaluations show that (1) Argobots outperforms existing generic threading runtimes; (2) our OpenMP runtime offers more efficient interoperability capabilities than production OpenMP runtimes do; (3) when MPI interoperates with Argobots instead of Pthreads, it enjoys reduced synchronization costs and better latency hiding capabilities; and (4) I/O service with Argobots reduces interference with co-located applications, achieving performance competitive with that of the Pthreads version.

X-ray measurement of residual stress on bolt threads

International Nuclear Information System (INIS)

Hagiwara, Masaya; Nakahara, Kanefumi; Yoshimoto, Isamu.

1989-01-01

This study deals with X-ray measurement of residual stress at the local area around the thread root of a bolt. Residual stress in the 0.5 mm x 5 mm area was measured using a method of stepped scanning and parabolic approximation. The conditions of measurement had been determined and evaluated through the preliminary measurement of compressive stress acting on the cylindrical surface. Furthermore, the fatigue strength estimated by applying the residual stress data to the previously presented hypothesis was compared with the experimental results. The main conclusions obtained were as follows: (1) The residual stress in a relatively small area on the cylindrical surface with large curvature can be measured by X-ray using a method of stepped scanning and parabolic approximation; (2) The compressive residual stress measured at the thread root was larger for the bolt manufactured by thread rolling after heat treatment than for one manufactured by thread rolling before heat treatment; (3) The distribution of residual stress along the axial direction from the thread root to the portion under crest did not represent remarkable change in its value; (4) The residual stress of a bolt was somewhat decreased by fatigue loading on the condition of low mean stress; (5) The fatigue strength estimated using residual stress data showed the tendency of experimental results well. (author)

Geant4-MT: bringing multi-threading into Geant4 production

International Nuclear Information System (INIS)

Ahn, S.; Apostolakis, J.; Cosmo, G.; Nowak, A.; Asai, M.; Brandt, D.; Dotti, A.; Coopermann, G.; Dong, X.; Jun, Soon Yung

2013-01-01

Geant4-MT is the multi-threaded version of the Geant4 particle transport code. The key goals for the design of Geant4-MT have been a) the need to reduce the memory footprint of the multi-threaded application compared to the use of separate jobs and processes; b) to create an easy migration of the existing applications; and c) to use efficiently many threads or cores, by scaling up to tens and potentially hundreds of workers. The first public release of a Geant4- MT prototype was made in 2011. We report on the revision of Geant4-MT for inclusion in the production-level release scheduled for end of 2013. This has involved significant re-engineering of the prototype in order to incorporate it into the main Geant4 development line, and the porting of Geant4-MT threading code to additional platforms. In order to make the porting of applications as simple as possible, refinements addressed the needs of standalone applications. Further adaptations were created to improve the fit with the frameworks of High Energy Physics experiments. We report on performances measurements on Intel Xeon TM , AMD Opteron TM the first trials of Geant4-MT on the Intel Many Integrated Cores (MIC) architecture, in the form of the Xeon Phi TM co-processor. These indicate near-linear scaling through about 200 threads on 60 cores, when holding fixed the number of events per thread. (authors)

Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking

Directory of Open Access Journals (Sweden)

Qingyue Yu

2016-01-01

Full Text Available Individual Carbon Nanotubes (CNTs have a great mechanical strength that needs to be transferred into macroscopic fiber assemblies. One approach to improve the mechanical strength of the CNT assemblies is by creating covalent bonding among their individual CNT building blocks. Chemical cross-linking of multiwall CNTs (MWCNTs within the fiber has significantly improved the strength of MWCNT thread. Results reported in this work show that the cross-linked thread had a tensile strength six times greater than the strength of its control counterpart, a pristine MWCNT thread (1192 MPa and 194 MPa, respectively. Additionally, electrical conductivity changes were observed, revealing 2123.40 S·cm−1 for cross-linked thread, and 3984.26 S·cm−1 for pristine CNT thread. Characterization suggests that the obtained high tensile strength is due to the cross-linking reaction of amine groups from ethylenediamine plasma-functionalized CNT with the epoxy groups of the cross-linking agent, 4,4-methylenebis(N,N-diglycidylaniline.

METHODS OF CONTROLLING THE AVERAGE DIAMETER OF THE THREAD WITH ASYMMETRICAL PROFILE

Directory of Open Access Journals (Sweden)

L. M. Aliomarov

2015-01-01

Full Text Available To handle the threaded holes in hard materials made of marine machinery, operating at high temperatures, heavy loads and in aggressive environments, the authors have developed the combined tool core drill -tap with a special cutting scheme, which has an asymmetric thread profile on the tap part. In order to control the average diameter of the thread of tap part of the combined tool was used the method three wires, which allows to make continuous measurement of the average diameter of the thread along the entire profile. Deviation from the average diameter from the sample is registered by inductive sensor and is recorded by the recorder. In the work are developed and presented control schemes of the average diameter of the threads with a symmetrical and asymmetrical profile. On the basis of these schemes are derived formulas for calculating the theoretical option to set the wires in the thread profile in the process of measuring the average diameter. Conducted complex research and the introduction of the combined instrument core drill-tap in the production of products of marine engineering, shipbuilding, ship repair power plants made of hard materials showed a high efficiency of the proposed technology for the processing of high-quality small-diameter threaded holes that meet modern requirements.

Teaching the Thesis

Science.gov (United States)

Carroll, Joyce Armstrong

2012-01-01

Writing a good thesis provides a successful foundation for composing an essay. Teaching how to do that, however, is quite another matter. Teachers often say to students, "Find a thesis," or "Get a thesis," or "Bring in a thesis statement tomorrow," as if students could order one like a pizza, command it like a pet pooch, or grasp one out of thin…

A microfluidic glucose sensor incorporating a novel thread-based electrode system.

Science.gov (United States)

Gaines, Michelle; Gonzalez-Guerrero, Maria Jose; Uchida, Kathryn; Gomez, Frank A

2018-05-01

An electrochemical sensor for the detection of glucose using thread-based electrodes and fabric is described. This device is relatively simple to fabricate and can be used for multiple readings after washing with ethanol. The fabrication of the chip consisted of two steps. First, three thread-based electrodes (reference, working, and counter) were fabricated by painting pieces of nylon thread with either layered silver ink and carbon ink or silver/silver chloride ink. The threads were then woven into a fabric chip with a beeswax barrier molded around the edges in order to prevent leaks from the tested solutions. A thread-based working electrode consisting of one layer of silver underneath two layers of carbon was selected to fabricate the final sensor system. Using the chip, a PBS solution containing glucose oxidase (GOx) (10 mg/mL), potassium ferricyanide (K 3 [Fe(CN) 6 ]) (10 mg/mL) as mediator, and different concentrations of glucose (0-25 mM), was measured by cyclic voltammetry (CV). It was found that the current output from the oxidation of glucose was proportional to the glucose concentrations. This thread-based electrode system is a viable sensor platform for detecting glucose in the physiological range. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

A multiple-scaling method of the computation of threaded structures

International Nuclear Information System (INIS)

Andrieux, S.; Leger, A.

1989-01-01

The numerical computation of threaded structures usually leads to very large finite elements problems. It was therefore very difficult to carry out some parametric studies, especially in non-linear cases involving plasticity or unilateral contact conditions. Nevertheless, these parametric studies are essential in many industrial problems, for instance for the evaluation of various repairing processes of the closure studs of PWR. It is well known that such repairing generally involves several modifications of the thread geometry, of the number of active threads, of the flange clamping conditions, and so on. This paper is devoted to the description of a two-scale method, which easily allows parametric studies. The main idea of this method consists of dividing the problem into a global part, and a local part. The local problem is solved by F.E.M. on the precise geometry of the thread of some elementary loadings. The global one is formulated on the gudgeon scale and is reduced to a monodimensional one. The resolution of this global problem leads to the unsignificant computational cost. Then, a post-processing gives the stress field at the thread scale anywhere in the assembly. After recalling some principles of the two-scales approach, the method is described. The validation by comparison with a direct F.E. computation and some further applications are presented

P-Refinement and P-Threads (Preprint)

National Research Council Canada - National Science Library

Dong, Steven; Karniadakis, George E

2002-01-01

...]) in d dimensions, which is higher than lower-order methods. In this paper, we demonstrate that by employing multi-threading within MPI processes we manage to counter- balance the cost increase associated with P-refinement...

Diary Thesis

OpenAIRE

Harjamäki, Jonni

2016-01-01

This thesis is result of following my daily work. In this report I discuss my daily activities and try to give some grounds for some of the solutions I have made. During this process I worked on a single product. I am part of a development team that is working on the said product. When I started writing the thesis I had already worked for few months. This thesis is a look on my personal development as a developer. It will provide insight on how my skills have progressed. As a result ...

The Automated Threaded Fastening Based on On-line Identification

Directory of Open Access Journals (Sweden)

Nicolas Ivan Giannoccaro

2008-11-01

Full Text Available The principle of the thread fastenings have been known and used for decades with the purpose of joining one component to another. Threaded fastenings are popular because they permit easy disassembly for maintenance, repair, relocation and recycling. Screw insertions are typically carried out manually. It is a difficult problem to automat. As a result there is very little published research on automating threaded fastenings, and most research on automated assembly focus on the peg-in-hole assembly problem. This paper investigates the problem of automated monitoring of the screw insertion process. The monitoring problem deals with predicting integrity of a threaded insertion, based on the torque vs. insertion depth curve generated during the insertions. The authors have developed an analytical model to predict the torque signature signals during self-tapping screw insertions. However, the model requires parameters on the screw dimensions and plate material properties are difficult to measure. This paper presents a study on on-line identification during screw fastenings. An identification methodology for two unknown parameter estimation during a self-tapping screw insertion process is presented. It is shown that friction and screw properties required by the model can be reliably estimated on-line. Experimental results are presented to validate the identification procedure.

A Hybrid Approach for Thread Recommendation in MOOC Forums

OpenAIRE

Ahmad. A. Kardan; Amir Narimani; Foozhan Ataiefard

2017-01-01

Recommender Systems have been developed to provide contents and services compatible to users based on their behaviors and interests. Due to information overload in online discussion forums and users diverse interests, recommending relative topics and threads is considered to be helpful for improving the ease of forum usage. In order to lead learners to find relevant information in educational forums, recommendations are even more needed. We present a hybrid thread recommender system for MOOC ...

The tractable cognition thesis.

Science.gov (United States)

Van Rooij, Iris

2008-09-01

The recognition that human minds/brains are finite systems with limited resources for computation has led some researchers to advance the Tractable Cognition thesis: Human cognitive capacities are constrained by computational tractability. This thesis, if true, serves cognitive psychology by constraining the space of computational-level theories of cognition. To utilize this constraint, a precise and workable definition of "computational tractability" is needed. Following computer science tradition, many cognitive scientists and psychologists define computational tractability as polynomial-time computability, leading to the P-Cognition thesis. This article explains how and why the P-Cognition thesis may be overly restrictive, risking the exclusion of veridical computational-level theories from scientific investigation. An argument is made to replace the P-Cognition thesis by the FPT-Cognition thesis as an alternative formalization of the Tractable Cognition thesis (here, FPT stands for fixed-parameter tractable). Possible objections to the Tractable Cognition thesis, and its proposed formalization, are discussed, and existing misconceptions are clarified. 2008 Cognitive Science Society, Inc.

Thread sign in biliary intraductal papillary mucinous neoplasm: a novel specific finding for MRI

International Nuclear Information System (INIS)

Hong, Gil-Sun; Byun, Jae Ho; Kim, Jin Hee; Kim, Hyoung Jung; Lee, Seung Soo; Lee, Moon-Gyu; Hong, Seung-Mo

2016-01-01

To evaluate thread sign of biliary intraductal papillary mucinous neoplasm (B-IPMN) on magnetic resonance imaging (MRI). Thread sign was defined as intraductal linear or curvilinear hypointense striations. Two radiologists independently evaluated the presence and location of thread sign on MR cholangiography (thin-slice, thick-slab and 3D MRC) and axial MR images (T2 TSE, T2 HASTE and DWI) in patients with B-IPMN (n = 38) and in matched control groups with benign (n = 36) or malignant (n = 35) biliary diseases. Sensitivity, specificity, accuracy, positive predictive value (PPV), and negative predictive value (NPV) of thread sign for diagnosing B-IPMN were evaluated. Thread sign was observed only in patients with B-IPMN on MRC (44.7-52.6 % [17/38-20/38], P < 0.001) and axial MR images (31.6 % [12/38], P < 0.001), except in one patient with recurrent pyogenic cholangitis on MRC (2.8 %, 1/36). The sensitivity, specificity, accuracy, PPV and NPV of thread sign for diagnosing B-IPMN on MRC were 0.53, 0.99, 0.83, 0.95 and 0.80, respectively (reader 1) and 0.45, 1.0, 0.81, 1.0 and 0.77, respectively (reader 2). Thread sign was detected mainly at the extrahepatic bile duct (52.6 %, 20/38). B-IPMN can manifest thread sign, a novel specific MR finding, mainly at the extrahepatic bile duct on MRI, especially on MRC. (orig.)

HELICAL MOTIONS OF FINE-STRUCTURE PROMINENCE THREADS OBSERVED BY HINODE AND IRIS

Energy Technology Data Exchange (ETDEWEB)

Okamoto, Takenori J. [National Astronomical Observatory of Japan, Mitaka, Tokyo 181-8588 (Japan); Liu, Wei [Bay Area Environmental Research Institute, 625 2nd Street, Suite 209, Petaluma, CA 94952 (United States); Tsuneta, Saku, E-mail: joten.okamoto@nao.ac.jp [ISAS/JAXA, Sagamihara, Kanagawa 252-5210 (Japan)

2016-11-10

Fine-structure dynamics in solar prominences holds critical clues to understanding their physical nature of significant space-weather implications. We report evidence of rotational motions of horizontal helical threads in two active-region prominences observed by the Hinode and/or Interface Region Imaging Spectrograph satellites at high resolution. In the first event, we found transverse motions of brightening threads at speeds up to 55 km s{sup -1} seen in the plane of the sky. Such motions appeared as sinusoidal space–time trajectories with a typical period of ∼390 s, which is consistent with plane-of-sky projections of rotational motions. Phase delays at different locations suggest the propagation of twists along the threads at phase speeds of 90–270 km s{sup -1}. At least 15 episodes of such motions occurred in two days, none associated with an eruption. For these episodes, the plane-of-sky speed is linearly correlated with the vertical travel distance, suggestive of a constant angular speed. In the second event, we found Doppler velocities of 30–40 km s{sup -1} in opposite directions in the top and bottom portions of the prominence, comparable to the plane-of-sky speed. The moving threads have about twice broader line widths than stationary threads. These observations, when taken together, provide strong evidence for rotations of helical prominence threads, which were likely driven by unwinding twists triggered by magnetic reconnection between twisted prominence magnetic fields and ambient coronal fields.

Fat versus Thin Threading Approach on GPUs: Application to Stochastic Simulation of Chemical Reactions

KAUST Repository

Klingbeil, Guido; Erban, Radek; Giles, Mike; Maini, Philip K.

2012-01-01

We explore two different threading approaches on a graphics processing unit (GPU) exploiting two different characteristics of the current GPU architecture. The fat thread approach tries to minimize data access time by relying on shared memory and registers potentially sacrificing parallelism. The thin thread approach maximizes parallelism and tries to hide access latencies. We apply these two approaches to the parallel stochastic simulation of chemical reaction systems using the stochastic simulation algorithm (SSA) by Gillespie [14]. In these cases, the proposed thin thread approach shows comparable performance while eliminating the limitation of the reaction system's size. © 2006 IEEE.

Fat versus Thin Threading Approach on GPUs: Application to Stochastic Simulation of Chemical Reactions

KAUST Repository

Klingbeil, Guido

2012-02-01

We explore two different threading approaches on a graphics processing unit (GPU) exploiting two different characteristics of the current GPU architecture. The fat thread approach tries to minimize data access time by relying on shared memory and registers potentially sacrificing parallelism. The thin thread approach maximizes parallelism and tries to hide access latencies. We apply these two approaches to the parallel stochastic simulation of chemical reaction systems using the stochastic simulation algorithm (SSA) by Gillespie [14]. In these cases, the proposed thin thread approach shows comparable performance while eliminating the limitation of the reaction system\\'s size. © 2006 IEEE.

CMS Thesis Award

CERN Multimedia

2004-01-01

The 2003 CMS thesis award was presented to Riccardo Ranieri on 15 March for his Ph.D. thesis "Trigger Selection of WH → μ ν b bbar with CMS" where 'WH → μ ν b bbar' represents the associated production of the W boson and the Higgs boson and their subsequent decays. Riccardo received his Ph.D. from the University of Florence and was supervised by Carlo Civinini. In total nine thesis were nominated for the award, which was judged on originality, impact within the field of high energy physics, impact within CMS and clarity of writing. Gregory Snow, secretary of the awarding committee, explains why Riccardo's thesis was chosen, ‘‘The search for the Higgs boson is one of the main physics goals of CMS. Riccardo's thesis helps the experiment to formulate the strategy which will be used in that search.'' Lorenzo Foà, Chairperson of the CMS Collaboration Board, presented Riccardo with an commemorative engraved plaque. He will also receive the opportunity to...

Simulation of LHC events on a millions threads

Science.gov (United States)

Childers, J. T.; Uram, T. D.; LeCompte, T. J.; Papka, M. E.; Benjamin, D. P.

2015-12-01

Demand for Grid resources is expected to double during LHC Run II as compared to Run I; the capacity of the Grid, however, will not double. The HEP community must consider how to bridge this computing gap by targeting larger compute resources and using the available compute resources as efficiently as possible. Argonne's Mira, the fifth fastest supercomputer in the world, can run roughly five times the number of parallel processes that the ATLAS experiment typically uses on the Grid. We ported Alpgen, a serial x86 code, to run as a parallel application under MPI on the Blue Gene/Q architecture. By analysis of the Alpgen code, we reduced the memory footprint to allow running 64 threads per node, utilizing the four hardware threads available per core on the PowerPC A2 processor. Event generation and unweighting, typically run as independent serial phases, are coupled together in a single job in this scenario, reducing intermediate writes to the filesystem. By these optimizations, we have successfully run LHC proton-proton physics event generation at the scale of a million threads, filling two-thirds of Mira.

Control of influence of a thread on a bending of screws

International Nuclear Information System (INIS)

Proskuriakov, N E; Lopa, I V; Trapeznikov, E V

2017-01-01

The influence of the threads and the bending of screw on their moments of inertia of the cross section considered. This problem is actual since existing methods exclude from calculations the influence of supporting the thread, using as the basic geometrical parameter such as the internal diameter of the thread (diameter of cavities). Fundamental difference of a bend of the screw from a bend of a smooth rod consists that moment of inertia of the screw is a variable. It is shown that the change in cross-section moment of inertia along the length of the screw are essential and have periodic character. Analytical interrelation of the bending of the screw and the decreasing of moment of inertia of its cross section is established and equation describing this phenomenon is suggested. The greatest decrease of the moment of inertia occurs in the middle of the screw length, and the lowest - at its ends. Function and approximate coefficients for the main types of thread are proposed, which take into account this change. (paper)

Development of Fire Resistant/Heat Resistant Sewing Thread

Science.gov (United States)

2016-03-01

BAA, specifically, Special Focus  Area:  Textile   Technologies . Service Thread’s proposal is hereby accepted in its entirety by the  government unless...report documents work carried out by Service Thread to show that domestic technology exists which would reduce base fiber costs, versus current...otherwise revised by this contract and is incorporated by reference.  The  technological  area under investigation is FR/HR sewing threads using core

AthenaMT: upgrading the ATLAS software framework for the many-core world with multi-threading

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00100895; The ATLAS collaboration; Baines, John; Bold, Tomasz; Calafiura, Paolo; Farrell, Steven; Malon, David; Ritsch, Elmar; Stewart, Graeme; Snyder, Scott; Tsulaia, Vakhtang; Wynne, Benjamin; van Gemmeren, Peter

2017-01-01

ATLAS’s current software framework, Gaudi/Athena, has been very successful for the experiment in LHC Runs 1 and 2. However, its single threaded design has been recognized for some time to be increasingly problematic as CPUs have increased core counts and decreased available memory per core. Even the multi-process version of Athena, AthenaMP, will not scale to the range of architectures we expect to use beyond Run2. After concluding a rigorous requirements phase, where many design components were examined in detail, ATLAS has begun the migration to a new data-flow driven, multi-threaded framework, which enables the simultaneous processing of singleton, thread unsafe legacy Algorithms, cloned Algorithms that execute concurrently in their own threads with different Event contexts, and fully re-entrant, thread safe Algorithms. In this paper we report on the process of modifying the framework to safely process multiple concurrent events in different threads, which entails significant changes in the underlying ha...

AthenaMT: Upgrading the ATLAS Software Framework for the Many-Core World with Multi-Threading

CERN Document Server

Leggett, Charles; The ATLAS collaboration; Bold, Tomasz; Calafiura, Paolo; Farrell, Steven; Malon, David; Ritsch, Elmar; Stewart, Graeme; Snyder, Scott; Tsulaia, Vakhtang; Wynne, Benjamin; van Gemmeren, Peter

2016-01-01

ATLAS's current software framework, Gaudi/Athena, has been very successful for the experiment in LHC Runs 1 and 2. However, its single threaded design has been recognised for some time to be increasingly problematic as CPUs have increased core counts and decreased available memory per core. Even the multi-process version of Athena, AthenaMP, will not scale to the range of architectures we expect to use beyond Run2. After concluding a rigorous requirements phase, where many design components were examined in detail, ATLAS has begun the migration to a new data-flow driven, multi-threaded framework, which enables the simultaneous processing of singleton, thread unsafe legacy Algorithms, cloned Algorithms that execute concurrently in their own threads with different Event contexts, and fully re-entrant, thread safe Algorithms. In this paper we will report on the process of modifying the framework to safely process multiple concurrent events in different threads, which entails significant changes in the underlying...

Thread-like supercapacitors based on one-step spun nanocomposite yarns.

Science.gov (United States)

Meng, Qinghai; Wang, Kai; Guo, Wei; Fang, Jin; Wei, Zhixiang; She, Xilin

2014-08-13

Thread-like electronic devices have attracted great interest because of their potential applications in wearable electronics. To produce high-performance, thread-like supercapacitors, a mixture of stable dispersions of single-walled carbon nanotubes and conducting polyaniline nanowires are prepared. Then, the mixture is spun into flexible yarns with a polyvinyl alcohol outer sheath by a one-step spinning process. The composite yarns show excellent mechanical properties and high electrical conductivities after sufficient washing to remove surfactants. After applying a further coating layer of gel electrolyte, two flexible yarns are twisted together to form a thread-like supercapacitor. The supercapacitor based on these two yarns (SWCNTs and PAniNWs) possesses a much higher specific capacitance than that based only on pure SWCNTs yarns, making it an ideal energy-storage device for wearable electronics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Adaptive control in multi-threaded iterated integration

International Nuclear Information System (INIS)

Doncker, Elise de; Yuasa, Fukuko

2013-01-01

In recent years we have developed a technique for the direct computation of Feynman loop-integrals, which are notorious for the occurrence of integrand singularities. Especially for handling singularities in the interior of the domain, we approximate the iterated integral using an adaptive algorithm in the coordinate directions. We present a novel multi-core parallelization scheme for adaptive multivariate integration, by assigning threads to the rule evaluations in the outer dimensions of the iterated integral. The method ensures a large parallel granularity as each function evaluation by itself comprises an integral over the lower dimensions, while the application of the threads is governed by the adaptive control in the outer level. We give computational results for a test set of 3- to 6-dimensional integrals, where several problems exhibit a loop integral behavior.

Review of Bolt Preload and Torque for Assembling Threaded Fasteners in Nuclear Power Plant

International Nuclear Information System (INIS)

Lee, Yong-Sung; Lee, Jae-Gon; Kang, Yong-Chul; Shin, Ki-Jong

2007-01-01

There are numerous threaded fasteners such as bolts, studs, nuts, cap screws and anchor bolts used in nuclear power plants(NPPs). The major applications of threaded fasteners are reactor coolant pressure boundary components, their internals and supports. With the increase of commercial operation period of NPPs, the incidents caused by degradation of threaded fasteners have been occurred. A large number of reported incidents are involved in the pressure boundary and major component supports. The degradation and failure of threaded fasteners is affected by material, preload and torque value at assembly, bolting practice, etc. It is very important to select appropriate bolt preload and decide assembly torque value because torque control using a torque wrench is the most common method in a power plant to assemble a bolted flange connection. Many researches have been studied to define the proper bolt preload and desired torque value with regard to the integrity of bolted connections including pressure boundary joints by EPRI and other plant industry. But in domestic NPPs, considerably few works are done on the bolted joint assembly in spite of increasing events related with threaded faster. Therefore we investigated degradation or failure of the threaded fasteners used in NPPs, also examined the codes, standards and technical trends concerning bolt preload and assembly torque in NPPs. It is the purpose of this study to provide proper technical information for assuring integrity of the threaded fasteners

Threaded biliary inside stents are a safe and effective therapeutic option in cases of malignant hilar obstruction.

Science.gov (United States)

Inatomi, Osamu; Bamba, Shigeki; Shioya, Makoto; Mochizuki, Yosuke; Ban, Hiromitsu; Tsujikawa, Tomoyuki; Saito, Yasuharu; Andoh, Akira; Fujiyama, Yoshihide

2013-02-14

Although endoscopic biliary stents have been accepted as part of palliative therapy for cases of malignant hilar obstruction, the optimal endoscopic management regime remains controversial. In this study, we evaluated the safety and efficacy of placing a threaded stent above the sphincter of Oddi (threaded inside plastic stents, threaded PS) and compared the results with those of other stent types. Patients with malignant hilar obstruction, including those requiring biliary drainage for stent occlusion, were selected. Patients received either one of the following endoscopic indwelling stents: threaded PS, conventional plastic stents (conventional PS), or metallic stents (MS). Duration of stent patency and the incident of complication were compared in these patients. Forty-two patients underwent placement of endoscopic indwelling stents (threaded PS = 12, conventional PS = 17, MS = 13). The median duration of threaded PS patency was significantly longer than that of conventional PS patency (142 vs. 32 days; P = 0.04, logrank test). The median duration of threaded PS and MS patency was not significantly different (142 vs. 150 days, P = 0.83). Stent migration did not occur in any group. Among patients who underwent threaded PS placement as a salvage therapy after MS obstruction due to tumor ingrowth, the median duration of MS patency was significantly shorter than that of threaded PS patency (123 vs. 240 days). Threaded PS are safe and effective in cases of malignant hilar obstruction; moreover, it is a suitable therapeutic option not only for initial drainage but also for salvage therapy.

Three-dimensional investigations of the threading regime in a microfluidic flow-focusing channel

Science.gov (United States)

Gowda, Krishne; Brouzet, Christophe; Lefranc, Thibault; Soderberg, L. Daniel; Lundell, Fredrik

2017-11-01

We study the flow dynamics of the threading regime in a microfluidic flow-focusing channel through 3D numerical simulations and experiments. Making strong filaments from cellulose nano-fibrils (CNF) could potentially steer to new high-performance bio-based composites competing with conventional glass fibre composites. CNF filaments can be obtained through hydrodynamic alignment of dispersed CNF by using the concept of flow-focusing. The aligned structure is locked by diffusion of ions resulting in a dispersion-gel transition. Flow-focusing typically refers to a microfluidic channel system where the core fluid is focused by the two sheath fluids, thereby creating an extensional flow at the intersection. In this study, threading regime corresponds to an extensional flow field generated by the water sheath fluid stretching the dispersed CNF core fluid and leading to formation of long threads. The experimental measurements are performed using optical coherence tomography (OCT) and 3D numerical simulations with OpenFOAM. The prime focus is laid on the 3D characteristics of thread formation such as wetting length of core fluid, shape, aspect ratio of the thread and velocity flow-field in the microfluidic channel.

During Threaded Discussions Are Non-Native English Speakers Always at a Disadvantage?

Science.gov (United States)

Shafer Willner, Lynn

2014-01-01

When participating in threaded discussions, under what conditions might non¬native speakers of English (NNSE) be at a comparative disadvantage to their classmates who are native speakers of English (NSE)? This study compares the threaded discussion perspectives of closely-matched NNSE and NSE adult students having different levels of threaded…

Hagfish slime threads as a biomimetic model for high performance protein fibres

International Nuclear Information System (INIS)

Fudge, Douglas S; Hillis, Sonja; Levy, Nimrod; Gosline, John M

2010-01-01

Textile manufacturing is one of the largest industries in the world, and synthetic fibres represent two-thirds of the global textile market. Synthetic fibres are manufactured from petroleum-based feedstocks, which are becoming increasingly expensive as demand for finite petroleum reserves continues to rise. For the last three decades, spider silks have been held up as a model that could inspire the production of protein fibres exhibiting high performance and ecological sustainability, but unfortunately, artificial spider silks have yet to fulfil this promise. Previous work on the biomechanics of protein fibres from the slime of hagfishes suggests that these fibres might be a superior biomimetic model to spider silks. Based on the fact that the proteins within these 'slime threads' adopt conformations that are similar to those in spider silks when they are stretched, we hypothesized that draw processing of slime threads should yield fibres that are comparable to spider dragline silk in their mechanical performance. Here we show that draw-processed slime threads are indeed exceptionally strong and tough. We also show that post-drawing steps such as annealing, dehydration and covalent cross-linking can dramatically improve the long-term dimensional stability of the threads. The data presented here suggest that hagfish slime threads are a model that should be pursued in the quest to produce fibres that are ecologically sustainable and economically viable.

Zebra mussels anchor byssal threads faster and tighter than quagga mussels in flow.

Science.gov (United States)

Peyer, Suzanne M; McCarthy, Alice J; Lee, Carol Eunmi

2009-07-01

While the invasive zebra mussel Dreissena polymorpha has rapidly spread throughout the Great Lakes and inland waterways, it is being displaced by the quagga mussel Dreissena bugensis in shallow water habitats. However, zebra mussels remain dominant in areas with higher water velocity. We hypothesized that the persistence of zebra over quagga mussels in habitats with higher water velocity might result from greater rate and strength of byssal thread attachment. We examined whether zebra mussels relative to quagga mussels have: (1) higher byssal thread synthesis rate, (2) lower dislodgment in flow and (3) greater mechanical force required for detachment from substrate. Specifically, we examined byssal thread synthesis rate and dislodgment of both species in response to water velocities of 0, 50, 100 and 180 cm s(-1). Byssal thread synthesis rate was significantly higher for zebra than for quagga mussels at all velocities. Dislodgment from the substrate increased for both species with increasing velocity but was significantly lower for zebra than for quagga mussels. We also tested the mechanical force to detach mussels after short (32 h) and long (two and three months) periods of attachment on hard substrate. Detachment force was significantly higher for zebra than for quagga mussels only after short-term attachment. Higher byssal thread synthesis rate in zebra mussels was a likely factor that minimized their dislodgment in flow and increased short-term attachment strength. Differences in byssal thread synthesis rate between the two species might partly account for the ability of zebra mussels to maintain dominance over quagga mussels in habitats with high velocities.

Ultrasonic Detection of Small Crack in Studs[Bolts] by Time Difference of Thread Signals(TDTS)

International Nuclear Information System (INIS)

Suh, D. M.; Park, D. Y.; Kim, C. K.

1990-01-01

It is difficult to detect such flaws as stress - corrosion cracking or corrosion wastage(loss of bolt diameter) in the threads. In many cases the critical size of a flaw is very small(1-2 mm order). This paper describes how it is possible to discriminate small flaw indications in threads using the time difference or thread signals(TDTS) by a signal-conditioning technique

[High frequency of plagiarism in medical thesis from a Peruvian public university].

Science.gov (United States)

Saldaña-Gastulo, J Jhan C; Quezada-Osoria, C Claudia; Peña-Oscuvilca, Américo; Mayta-Tristán, Percy

2010-03-01

An observational study was conducted to describe the presence of plagiarism in medical thesis in 2008 performed at a public university in Peru. Search for plagiarism in 33 thesis introductions using a Google search algorithm, characterizes of the study type and we search in electronic form if the thesis mentor have published articles in scientific journals. We found evidence of plagiarism in 27/33 introductions, 37.3% (171/479) of all the paragraphs analyzed had some degree of plagiarism, literal plagiarism was the most frequent (20/27) and journals were the most common sources of plagiarism (19/27). The characteristics of the studies were observational (32/33), cross-sectional (30/33), descriptive (25/33) and retrospective (19/33). None of the authors had published in a scientific journal, and only nine of his tutors of them had at least one publication. No association was found between the characteristics of the thesis and the presence of plagiarism. In conclusion, we found a high frequency of plagiarism in theses analyzed. Is responsibility of medical schools take the necessary actions to detect and avoid plagiarism among their students.

Effect of Thread and Rotating Speed on Material Flow Behavior and Mechanical Properties of Friction Stir Lap Welding Joints

Science.gov (United States)

Ji, Shude; Li, Zhengwei; Zhou, Zhenlu; Wu, Baosheng

2017-10-01

This study focused on the effects of thread on hook and cold lap formation, lap shear property and impact toughness of alclad 2024-T4 friction stir lap welding (FSLW) joints. Except the traditional threaded pin tool (TR-tool), three new tools with different thread locations and orientations were designed. Results showed that thread significantly affected hook, cold lap morphologies and lap shear properties. The tool with tip-threaded pin (T-tool) fabricated joint with flat hook and cold lap, which resulted in shear fracture mode. The tools with bottom-threaded pin (B-tool) eliminated the hook. The tool with reverse-threaded pin (R-tool) widened the stir zone width. When using configuration A, the joints fabricated by the three new tools showed higher failure loads than the joint fabricated by the TR-tool. The joint using the T-tool owned the optimum impact toughness. This study demonstrated the significance of thread during FSLW and provided a reference to optimize tool geometry.

Why Is There a Glass Ceiling for Threading Based Protein Structure Prediction Methods?

Science.gov (United States)

Skolnick, Jeffrey; Zhou, Hongyi

2017-04-20

Despite their different implementations, comparison of the best threading approaches to the prediction of evolutionary distant protein structures reveals that they tend to succeed or fail on the same protein targets. This is true despite the fact that the structural template library has good templates for all cases. Thus, a key question is why are certain protein structures threadable while others are not. Comparison with threading results on a set of artificial sequences selected for stability further argues that the failure of threading is due to the nature of the protein structures themselves. Using a new contact map based alignment algorithm, we demonstrate that certain folds are highly degenerate in that they can have very similar coarse grained fractions of native contacts aligned and yet differ significantly from the native structure. For threadable proteins, this is not the case. Thus, contemporary threading approaches appear to have reached a plateau, and new approaches to structure prediction are required.

The Unobservability Thesis

DEFF Research Database (Denmark)

Overgaard, Søren

2017-01-01

The unobservability thesis (UT) states that the mental states of other people are unobservable. Both defenders and critics of UT seem to assume that UT has important implications for the mindreading debate. Roughly, the former argue that because UT is true, mindreaders need to infer the mental...... implications for the mindreading debate. On the other line of interpretation, UT may matter to the mindreading debate, in particular if we think of it as a thesis about the possible contents of perceptual experience. The upshot is that those who believe UT has implications for the mindreading debate need...... to be more specific about how they understand the thesis....

A communicating Thread -CT- case study: JIWY

NARCIS (Netherlands)

Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Pascoe, P.W.J.; Loader, R.; Sunderman, V.

2002-01-01

This JIWY demonstrator is constructed in the context of the development of a design framework and software tools to efficiently support mechatronic engineers in developing sophisticated control computer code out of a set control laws. We use the CSP-based Communicating Threads -CT- library as the

Evaluating the use of laser radiation in cleaning of copper embroidery threads on archaeological Egyptian textiles

International Nuclear Information System (INIS)

Abdel-Kareem, Omar; Harith, M.A.

2008-01-01

Cleaning of copper embroidery threads on archaeological textiles is still a complicated conservation process, as most textile conservators believe that the advantages of using traditional cleaning techniques are less than their disadvantages. In this study, the uses of laser cleaning method and two modified recipes of wet cleaning methods were evaluated for cleaning of the corroded archaeological Egyptian copper embroidery threads on an archaeological Egyptian textile fabric. Some corroded copper thread samples were cleaned using modified recipes of wet cleaning method; other corroded copper thread samples were cleaned with Q-switched Nd:YAG laser radiation of wavelength 532 nm. All tested metal thread samples before and after cleaning were investigated using a light microscope and a scanning electron microscope with an energy dispersive X-ray analysis unit. Also the laser-induced breakdown spectroscopy (LIBS) technique was used for the elemental analysis of laser-cleaned samples to follow up the laser cleaning procedure. The results show that laser cleaning is the most effective method among all tested methods in the cleaning of corroded copper threads. It can be used safely in removing the corrosion products without any damage to both metal strips and fibrous core. The tested laser cleaning technique has solved the problems caused by other traditional cleaning techniques that are commonly used in the cleaning of metal threads on museum textiles

Evaluating the use of laser radiation in cleaning of copper embroidery threads on archaeological Egyptian textiles

Energy Technology Data Exchange (ETDEWEB)

Abdel-Kareem, Omar [Conservation Department, Faculty of Archaeology, Cairo University, El-Gamaa Street, El-Giza (Egypt)], E-mail: Omaa67@yahoo.com; Harith, M.A. [National Institute of Laser Enhanced Science, Cairo University (Egypt)], E-mail: mharithm@niles.edu.eg

2008-07-15

Cleaning of copper embroidery threads on archaeological textiles is still a complicated conservation process, as most textile conservators believe that the advantages of using traditional cleaning techniques are less than their disadvantages. In this study, the uses of laser cleaning method and two modified recipes of wet cleaning methods were evaluated for cleaning of the corroded archaeological Egyptian copper embroidery threads on an archaeological Egyptian textile fabric. Some corroded copper thread samples were cleaned using modified recipes of wet cleaning method; other corroded copper thread samples were cleaned with Q-switched Nd:YAG laser radiation of wavelength 532 nm. All tested metal thread samples before and after cleaning were investigated using a light microscope and a scanning electron microscope with an energy dispersive X-ray analysis unit. Also the laser-induced breakdown spectroscopy (LIBS) technique was used for the elemental analysis of laser-cleaned samples to follow up the laser cleaning procedure. The results show that laser cleaning is the most effective method among all tested methods in the cleaning of corroded copper threads. It can be used safely in removing the corrosion products without any damage to both metal strips and fibrous core. The tested laser cleaning technique has solved the problems caused by other traditional cleaning techniques that are commonly used in the cleaning of metal threads on museum textiles.

Evaluating the use of laser radiation in cleaning of copper embroidery threads on archaeological Egyptian textiles

Science.gov (United States)

Abdel-Kareem, Omar; Harith, M. A.

2008-07-01

Cleaning of copper embroidery threads on archaeological textiles is still a complicated conservation process, as most textile conservators believe that the advantages of using traditional cleaning techniques are less than their disadvantages. In this study, the uses of laser cleaning method and two modified recipes of wet cleaning methods were evaluated for cleaning of the corroded archaeological Egyptian copper embroidery threads on an archaeological Egyptian textile fabric. Some corroded copper thread samples were cleaned using modified recipes of wet cleaning method; other corroded copper thread samples were cleaned with Q-switched Nd:YAG laser radiation of wavelength 532 nm. All tested metal thread samples before and after cleaning were investigated using a light microscope and a scanning electron microscope with an energy dispersive X-ray analysis unit. Also the laser-induced breakdown spectroscopy (LIBS) technique was used for the elemental analysis of laser-cleaned samples to follow up the laser cleaning procedure. The results show that laser cleaning is the most effective method among all tested methods in the cleaning of corroded copper threads. It can be used safely in removing the corrosion products without any damage to both metal strips and fibrous core. The tested laser cleaning technique has solved the problems caused by other traditional cleaning techniques that are commonly used in the cleaning of metal threads on museum textiles.

HIGH PERFORMANCE TAPS FOR CUTTING THREADS IN DIFFICULT TO MACHINE MATERIALS

Directory of Open Access Journals (Sweden)

M. R. Akhmedova

2016-01-01

Full Text Available Objectives. This article explores in detail questions of instrument operation function of tapping internal threads in hard materials. The existing relationship between vibration system amplitude and tool durability is indicated; on this basis, it is determined that the best course for improving the durability performance is increasing vibratory resistance. Based on a critical analysis of existing designs with consideration of their flaws, the development of new technological designs of taps is tasked with ensuring stable operation when handling hard materials. Methods. It is noteworthy that one of the main vibration resistance improvement methods of the tool is to reduce the contact area of the tool with the work piece in the cutting zone. Methods are proposed for improving the vibration resistance of taps, considering the correlation adjustment of tap teeth in order to completely eliminate friction at the sides of the thread cutting surface and uneven implementation flute cutting steps. Results. The idea of increasing vibration resistance has seen the new development of vibration-proof tap designs, heralded as innovations due to the accuracy of thread cutting and durability achieved by reducing the thread contact area with the work piece in the cutting zone. Increased vibration resistance is achieved in the modified taps through high correction by means of thread side downgrading of the coarse tap cone by an additional angle of 30º. In another design, the stylus provided with uneven angular spacing. Test results of designed taps machined in corrosion-resistant 1Kh18N9T steel. A manifold increase in tool durability was achieved due to its high vibration resistance. Conclusions. The redesigned taps have a number of advantages, characterised by a high resistance when processing difficult materials and an insignificant increase in the complexity of their manufacture compared with standard taps. Therefore they can be recommended for large

Improving mandibular contour: A pilot study for indication of PPLA traction thread use.

Science.gov (United States)

Guida, Stefania; Persechino, Flavia; Rubino, Giuseppe; Pellacani, Giovanni; Farnetani, Francesca; Urtis, Giacomo Giovanni

2018-02-20

The request for less-aggressive procedures to improve mandibular contour is increasing. Several kinds of threads have been used for this purpose. Nevertheless, PLLA (poly-L-Lactic acid) traction thread procedure has not been previously described. To investigate the role of PLLA traction threads in improving mandibular contour. Twenty women were enrolled in the study. They were differentially classified for skin laxity. Patients were treated in a single session with two PLLA traction threads per side. Specific post-procedure instructions were given to patients, and complications occurred after the procedures were estimated. A Fisher's t-test was performed to identify criteria related to longevity of results. We found longevity of results to be associated with younger age (p = 0.001), absence of severe skin laxity of jawline and neck (p = 0.001), and aesthetic satisfaction (p = 0.024). Edema, swelling, and temporary skin contour irregularities were found in most cases (N = 16; 80%), whereas paresthesia resolving without sequelae in 2-4 weeks was found in two cases (10%). Our results show that selected patients, younger than 51 and showing a mild-moderate degree of skin laxity of jawline and neck angle represent ideal candidates for PLLA traction thread treatment. Further studies will be performed to confirm our results.

Developing eThread Pipeline Using SAGA-Pilot Abstraction for Large-Scale Structural Bioinformatics

Directory of Open Access Journals (Sweden)

Anjani Ragothaman

2014-01-01

Full Text Available While most of computational annotation approaches are sequence-based, threading methods are becoming increasingly attractive because of predicted structural information that could uncover the underlying function. However, threading tools are generally compute-intensive and the number of protein sequences from even small genomes such as prokaryotes is large typically containing many thousands, prohibiting their application as a genome-wide structural systems biology tool. To leverage its utility, we have developed a pipeline for eThread—a meta-threading protein structure modeling tool, that can use computational resources efficiently and effectively. We employ a pilot-based approach that supports seamless data and task-level parallelism and manages large variation in workload and computational requirements. Our scalable pipeline is deployed on Amazon EC2 and can efficiently select resources based upon task requirements. We present runtime analysis to characterize computational complexity of eThread and EC2 infrastructure. Based on results, we suggest a pathway to an optimized solution with respect to metrics such as time-to-solution or cost-to-solution. Our eThread pipeline can scale to support a large number of sequences and is expected to be a viable solution for genome-scale structural bioinformatics and structure-based annotation, particularly, amenable for small genomes such as prokaryotes. The developed pipeline is easily extensible to other types of distributed cyberinfrastructure.

APPLICATION PROSPECTS OF THREADED JOINT OF ARMATURE

Directory of Open Access Journals (Sweden)

A. V. Radkevych

2014-06-01

Full Text Available Purpose. One of the main technological operations of buildings construction on the basis of monolithic frame systems is the production of mesh reinforcement. The current interest is the new ways specification of advanced bonding armature techniques without reliability weakness and design of the building in whole, as well as the finding of use prospects of screw-threaded joint of armature as the most technological and economic method of re-bars joints. Methodology. Advantages and disadvantages analysis of existing rebar compound technologies was implemented by couplings of different types and constructions. The most promising vertical constructions for the vertical bars joints in frameworks were determined. Findings. Researches of existing technologies of rebar joints by the couplings of different construction were carried out. The installation method of mesh reinforcement of vertical structural elements with the use of the special catching devices was developed. It allows considerably accelerating installation of mesh reinforcement. Originality. Regularity of labor intensiveness change of mesh reinforcement installation of columns at armature joint in vertical position by threaded couplings with the help of catching devices using special construction was determined. This allows substantially reducing the labor expenditures during installation of these elements. Dependency of labor intensiveness and cost of lap welding armature joints, by tub-seam welding and by thread coupling depending on its diameter was designated. Regularity of labor intensiveness changes of installation at armature joints by different methods taking into account preparatory works was defined. Practical value. The analysis of mechanical armature joints techniques was conducted. It will allow selecting methods of armature joints to increase the speed of construction works more economical and effective.

Protein Structure Prediction by Protein Threading

Science.gov (United States)

Xu, Ying; Liu, Zhijie; Cai, Liming; Xu, Dong

The seminal work of Bowie, Lüthy, and Eisenberg (Bowie et al., 1991) on "the inverse protein folding problem" laid the foundation of protein structure prediction by protein threading. By using simple measures for fitness of different amino acid types to local structural environments defined in terms of solvent accessibility and protein secondary structure, the authors derived a simple and yet profoundly novel approach to assessing if a protein sequence fits well with a given protein structural fold. Their follow-up work (Elofsson et al., 1996; Fischer and Eisenberg, 1996; Fischer et al., 1996a,b) and the work by Jones, Taylor, and Thornton (Jones et al., 1992) on protein fold recognition led to the development of a new brand of powerful tools for protein structure prediction, which we now term "protein threading." These computational tools have played a key role in extending the utility of all the experimentally solved structures by X-ray crystallography and nuclear magnetic resonance (NMR), providing structural models and functional predictions for many of the proteins encoded in the hundreds of genomes that have been sequenced up to now.

SISSY: An example of a multi-threaded, networked, object-oriented databased application

International Nuclear Information System (INIS)

Scipioni, B.; Liu, D.; Song, T.

1993-05-01

The Systems Integration Support SYstem (SISSY) is presented and its capabilities and techniques are discussed. It is fully automated data collection and analysis system supporting the SSCL's systems analysis activities as they relate to the Physics Detector and Simulation Facility (PDSF). SISSY itself is a paradigm of effective computing on the PDSF. It uses home-grown code (C++), network programming (RPC, SNMP), relational (SYBASE) and object-oriented (ObjectStore) DBMSs, UNIX operating system services (IRIX threads, cron, system utilities, shells scripts, etc.), and third party software applications (NetCentral Station, Wingz, DataLink) all of which act together as a single application to monitor and analyze the PDSF

Compliant threads maximize spider silk connection strength and toughness

Science.gov (United States)

Meyer, Avery; Pugno, Nicola M.; Cranford, Steven W.

2014-01-01

Millions of years of evolution have adapted spider webs to achieve a range of functionalities, including the well-known capture of prey, with efficient use of material. One feature that has escaped extensive investigation is the silk-on-silk connection joints within spider webs, particularly from a structural mechanics perspective. We report a joint theoretical and computational analysis of an idealized silk-on-silk fibre junction. By modifying the theory of multiple peeling, we quantitatively compare the performance of the system while systematically increasing the rigidity of the anchor thread, by both scaling the stress–strain response and the introduction of an applied pre-strain. The results of our study indicate that compliance is a virtue—the more extensible the anchorage, the tougher and stronger the connection becomes. In consideration of the theoretical model, in comparison with rigid substrates, a compliant anchorage enormously increases the effective adhesion strength (work required to detach), independent of the adhered thread itself, attributed to a nonlinear alignment between thread and anchor (contact peeling angle). The results can direct novel engineering design principles to achieve possible load transfer from compliant fibre-to-fibre anchorages, be they silk-on-silk or another, as-yet undeveloped, system. PMID:25008083

An Analysis of Current Graduation Thesis Writing by English Majors in Independent Institute

Science.gov (United States)

Han, Ying

2014-01-01

The paper takes 414 graduates from ZJU in 2011 and 2012, NIT as a case, analyzing the status of their writing of graduation thesis. It is found that a considerable number of students have problems in selection and report of topics, writing of each part and debating in the whole process of graduation thesis. In view of the situation, based on the…

Seminar for Master's Thesis Projects: Promoting Students' Self-Regulation

Science.gov (United States)

Miedijensky, Shirley; Lichtinger, Einat

2016-01-01

This study presents a thesis seminar model aimed at promoting students' self-regulation. Students' perceptions regarding the contribution of the seminar to their learning process were characterized and the seminar's effect upon their self-regulation expressions was examined. Data was collected using questionnaires and analyzed thematically. The…

Effective verification of confidentiality for multi-threaded programs

NARCIS (Netherlands)

Ngo, Minh Tri; Stoelinga, Mariëlle Ida Antoinette; Huisman, Marieke

2014-01-01

This paper studies how confidentiality properties of multi-threaded programs can be verified efficiently by a combination of newly developed and existing model checking algorithms. In particular, we study the verification of scheduler-specific observational determinism (SSOD), a property that

MT-ADRES: multi-threading on coarse-grained reconfigurable architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2008-01-01

The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl's law, this article proposes to extend ADRES to MT-ADRES (multi-threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned...

Multi-thread Parallel Speech Recognition for Mobile Applications

Directory of Open Access Journals (Sweden)

LOJKA Martin

2014-05-01

Full Text Available In this paper, the server based solution of the multi-thread large vocabulary automatic speech recognition engine is described along with the Android OS and HTML5 practical application examples. The basic idea was to bring speech recognition available for full variety of applications for computers and especially for mobile devices. The speech recognition engine should be independent of commercial products and services (where the dictionary could not be modified. Using of third-party services could be also a security and privacy problem in specific applications, when the unsecured audio data could not be sent to uncontrolled environments (voice data transferred to servers around the globe. Using our experience with speech recognition applications, we have been able to construct a multi-thread speech recognition serverbased solution designed for simple applications interface (API to speech recognition engine modified to specific needs of particular application.

Identification of symbiotically defective mutants of Lotus japonicus affected in infection thread growth

DEFF Research Database (Denmark)

Lombardo, Fabien; Heckmann, Anne Birgitte Lau; Miwa, Hiroki

2006-01-01

During the symbiotic interaction between legumes and rhizobia, the host cell plasma membrane and associated plant cell wall invaginate to form a tunnel-like infection thread, a structure in which bacteria divide to reach the plant root cortex. We isolated four Lotus japonicus mutants that make...... infection pockets in root hairs but form very few infection threads after inoculation with Mesorhizobium loti. The few infection threads that did initiate in the mutants usually did not progress further than the root hair cell. These infection-thread deficient (itd) mutants were unaffected for early...... symbiotic responses such as calcium spiking, root hair deformation, and curling, as well as for the induction of cortical cell division and the arbuscular mycorrhizal symbiosis. Complementation tests and genetic mapping indicate that itd2 is allelic to Ljsym7, whereas the itd1, itd3, and itd4 mutations...

The Tractable Cognition thesis

NARCIS (Netherlands)

Rooij, I.J.E.I. van

2008-01-01

The recognition that human minds/brains are finite systems with limited resources for computation has led some researchers to advance the Tractable Cognition thesis: Human cognitive capacities are constrained by computational tractability. This thesis, if true, serves cognitive psychology by

Safety and complications of absorbable threads made of poly-L-lactic acid and poly lactide/glycolide: Experience with 148 consecutive patients.

Science.gov (United States)

Sarigul Guduk, Sukran; Karaca, Nezih

2018-04-01

Thread lifting is a minimally invasive procedure for lifting and repositioning tissues. Few articles with absorbable sutures exist in the literature. Furthermore there is no study focusing on complications of absorbable sutures. To describe complications of thread lifting using a totally absorbable suture composed of poly-L-lactic acid affixed with poly lactide/glycolide cones. Data regarding complications were analyzed retrospectively for 148 patients underwent thread lifting between June 2014 and February 2017. A total of 321 pairs of sutures used in the 148 patients studied. Overall 40 (27%) patients had complications regarded as minimal or moderate without permanent sequela. The most common complication was skin dimpling and irregularity (n = 17, 11.4%) followed by ecchymosis (n = 12, 8.1%), suture extrusion (n = 4, 2.7%), and pain (n = 4, 2.7%) Except one patient, dimpling, and irregularity resolved in all patients after 3-7 days spontaneously. Suture migration was observed in 2 (1.35%) patients. Hematoma and infection were seen in 2 patients one for each. The procedure using sutures made of absorbable poly-L-lactic acid and poly lactide/glycolide is a relatively safe procedure without major complications. © 2018 Wiley Periodicals, Inc.

Comparative analysis of textile metal threads from liturgical vestments and folk costumes in Croatia

Science.gov (United States)

Šimić, Kristina; Zamboni, Ivana; Fazinić, Stjepko; Mudronja, Domagoj; Sović, Lea; Gouasmia, Sabrina; Soljačić, Ivo

2018-02-01

Textile is essential for everyday life in all societies. It is used in clothes for protection and warmth but also to indicate class and position, show wealth and social status. Threads from precious metals have also been used in combination with fibres for decoration in order to create luxury fabrics for secular and religious elites. We performed elemental analysis of 17th to 20th century metal threads from various textile articles of liturgical vestments and festive folk costumes collected in the museums of northern, southern and central Croatian regions. In order to determine elemental concentrations in threads we performed comparative X-ray Spectroscopy measurements using: (i) Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDX) at the Faculty of Textile Technology, (ii) X-ray Fluorescence Spectroscopy (XRF) at the Croatian Conservation Institute and (iii) Particle Induced X-ray Spectroscopy (PIXE) at the Ruđer Bošković Institute Tandem Accelerator Facility using ion micro beam. Rutherford Backscattering Spectroscopy (RBS) was performed as well on selected samples. SEM-EDX investigations of cross-sections along with the surfaces were also performed. In this work we report and discuss the results obtained by the three X-ray methods and RBS for major (gold, silver, copper) and minor elements on different threads like stripes, wires and "srma" (metal thread wrapped around textile yarn).

Influence of Thread Root Radius on Maximum Local Stresses at Large Diameter Bolts under Axial Loading

Directory of Open Access Journals (Sweden)

Cojocaru Vasile

2014-06-01

Full Text Available In the thread root area of the threaded bolts submitted to axial loading occur local stresses, higher that nominal stresses calculated for the bolts. These local stresses can generate failure and can reduce the fatigue life of the parts. The paper is focused on the study of the influence of the thread root radius on the maximum local stresses. A large diameter trapezoidal bolt was subjected to a static analysis (axial loading using finite element simulation.

A IMPORTÂNCIA DE THREADS NO DESEMPENHO DE APLICAÇÕES

Directory of Open Access Journals (Sweden)

Victor Pereira Ribeiro

2017-02-01

Full Text Available Com a finalidade de mostrar a presença e a importância de threads para os usuários de computadores, e despertar o interesse, principalmente de estudantes das áreas relacionadas, foi construída uma tabela de comparação do tempo de processamento gasto, foram usados códigos escritos na linguagem C++, que implementam algoritmos de ordenação (Bubble Sort, Insertion Sort e Selection Sort, e para cada algoritmo foi feita a ordenação de um vetor de 100000 (cem mil posições. Também é importante citar que foram feitos testes com 5 e 9 vetores, afim de obter resultados mais expressivos. Por último foram feitos testes com threads, seguindo os mesmos moldes dos anterior. Os testes feitos em dois computadores diferentes mostraram um ganho notável para os threads, 48,34% e 67,46%, valores significativos para aplicações que requerem mais desempenho.

The Tractable Cognition Thesis

Science.gov (United States)

van Rooij, Iris

2008-01-01

The recognition that human minds/brains are finite systems with limited resources for computation has led some researchers to advance the "Tractable Cognition thesis": Human cognitive capacities are constrained by computational tractability. This thesis, if true, serves cognitive psychology by constraining the space of computational-level theories…

Effects of stitch density and stitch thread thickness on mode II delamination properties of Vectran stitched composites

KAUST Repository

Herwan, J.

2014-11-01

© Institute of Materials, Minerals and Mining 2014. Mode II delamination properties of Vectran stitched composites were investigated, and tabbed end notch flexural specimen testing was used to prevent premature failure. The effects of stitch density and stitch thread thickness were explored, and fibre compaction due to the stitching process was also verified. The results show that, in moderately stitched laminates (low stitch density), the improvement in GIIC was negligible. Crack bridging by the stitch threads at the crack zone were mostly compensated for the effect of fibre compaction, which reduced the GIIC values. Conversely, in densely stitched laminates (high stitch density), GIIC values were improved significantly (2·4 times higher than those of unstitched laminates). The effects of stitch thread thickness appeared to be negligible in moderately stitched laminates. For densely stitched laminates, thicker stitch thread (500 denier) possessed GIIC values that were 45·7% higher than thinner stitch thread (200 denier).

Effects of stitch density and stitch thread thickness on mode II delamination properties of Vectran stitched composites

KAUST Repository

Herwan, J.; Kondo, A.; Morooka, S.; Watanabe, N.

2014-01-01

© Institute of Materials, Minerals and Mining 2014. Mode II delamination properties of Vectran stitched composites were investigated, and tabbed end notch flexural specimen testing was used to prevent premature failure. The effects of stitch density and stitch thread thickness were explored, and fibre compaction due to the stitching process was also verified. The results show that, in moderately stitched laminates (low stitch density), the improvement in GIIC was negligible. Crack bridging by the stitch threads at the crack zone were mostly compensated for the effect of fibre compaction, which reduced the GIIC values. Conversely, in densely stitched laminates (high stitch density), GIIC values were improved significantly (2·4 times higher than those of unstitched laminates). The effects of stitch thread thickness appeared to be negligible in moderately stitched laminates. For densely stitched laminates, thicker stitch thread (500 denier) possessed GIIC values that were 45·7% higher than thinner stitch thread (200 denier).

Inchworm movement of two rings switching onto a thread by biased Brownian diffusion represent a three-body problem.

Science.gov (United States)

Benson, Christopher R; Maffeo, Christopher; Fatila, Elisabeth M; Liu, Yun; Sheetz, Edward G; Aksimentiev, Aleksei; Singharoy, Abhishek; Flood, Amar H

2018-05-07

The coordinated motion of many individual components underpins the operation of all machines. However, despite generations of experience in engineering, understanding the motion of three or more coupled components remains a challenge, known since the time of Newton as the "three-body problem." Here, we describe, quantify, and simulate a molecular three-body problem of threading two molecular rings onto a linear molecular thread. Specifically, we use voltage-triggered reduction of a tetrazine-based thread to capture two cyanostar macrocycles and form a [3]pseudorotaxane product. As a consequence of the noncovalent coupling between the cyanostar rings, we find the threading occurs by an unexpected and rare inchworm-like motion where one ring follows the other. The mechanism was derived from controls, analysis of cyclic voltammetry (CV) traces, and Brownian dynamics simulations. CVs from two noncovalently interacting rings match that of two covalently linked rings designed to thread via the inchworm pathway, and they deviate considerably from the CV of a macrocycle designed to thread via a stepwise pathway. Time-dependent electrochemistry provides estimates of rate constants for threading. Experimentally derived parameters (energy wells, barriers, diffusion coefficients) helped determine likely pathways of motion with rate-kinetics and Brownian dynamics simulations. Simulations verified intercomponent coupling could be separated into ring-thread interactions for kinetics, and ring-ring interactions for thermodynamics to reduce the three-body problem to a two-body one. Our findings provide a basis for high-throughput design of molecular machinery with multiple components undergoing coupled motion.

Arbejdspapir til Thesis-seminar

DEFF Research Database (Denmark)

Damkjaer, Maja Sonne

2014-01-01

Arbejdspapir til Thesis-seminar afholdt ved Forskningsseminar i Forskningsprogrammet: Medier, Kommunikation og Samfund, Institut for Æstetik og Kommunikation, Aarhus Universitet. Afhandlingens teoretiske afsnit.......Arbejdspapir til Thesis-seminar afholdt ved Forskningsseminar i Forskningsprogrammet: Medier, Kommunikation og Samfund, Institut for Æstetik og Kommunikation, Aarhus Universitet. Afhandlingens teoretiske afsnit....

Rapid and reliable protein structure determination via chemical shift threading.

Science.gov (United States)

Hafsa, Noor E; Berjanskii, Mark V; Arndt, David; Wishart, David S

2018-01-01

Protein structure determination using nuclear magnetic resonance (NMR) spectroscopy can be both time-consuming and labor intensive. Here we demonstrate how chemical shift threading can permit rapid, robust, and accurate protein structure determination using only chemical shift data. Threading is a relatively old bioinformatics technique that uses a combination of sequence information and predicted (or experimentally acquired) low-resolution structural data to generate high-resolution 3D protein structures. The key motivations behind using NMR chemical shifts for protein threading lie in the fact that they are easy to measure, they are available prior to 3D structure determination, and they contain vital structural information. The method we have developed uses not only sequence and chemical shift similarity but also chemical shift-derived secondary structure, shift-derived super-secondary structure, and shift-derived accessible surface area to generate a high quality protein structure regardless of the sequence similarity (or lack thereof) to a known structure already in the PDB. The method (called E-Thrifty) was found to be very fast (often chemical shift refinement, these results suggest that protein structure determination, using only NMR chemical shifts, is becoming increasingly practical and reliable. E-Thrifty is available as a web server at http://ethrifty.ca .

The Influence of the Properties of Embroidery Threads on Buckling of Fabric Inside of the Embroidered Element

Directory of Open Access Journals (Sweden)

Svetlana RADAVIČIENĖ

2012-12-01

Full Text Available In production of garments, embroidery carries out a variety of functions, one of which is the aesthetic appearance of the product improvement. The resulting defects, are seen as a negative indicator of the product quality. The discrepancy of the embroidered element to the digital design in size is a defect, which is influenced by the embroidery threads, embroidery materials properties and process parameters. The fabric sorrounded by the embroidery threads between adjancent needle penetrations inside of the embroidered element is compressed, buckling. The aim of this paper is to investigate the influence of the properties of embroidery threads on buckling of fabric inside of the embroidered element. For investigations specimens were prepared using different fibre composition, density and linear structure of the embroidery threads. Specimens were cut and photo-captured at the beginning, middle and end of the embroidered element.  It was found, that different properties of the embroidery threads affecting on the different behavior of fabric inside of the embroidered element. The results of the investigations showed that the fabric inside of the embroidered element formed larger waves of buckling using the maximum elongation of the feedback exhibiting embroidery thread.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3100

Successive Two-sided Loop Jets Caused by Magnetic Reconnection between Two Adjacent Filamentary Threads

Energy Technology Data Exchange (ETDEWEB)

Tian, Zhanjun; Liu, Yu; Shen, Yuandeng [Yunnan Observatories, Chinese Academy of Sciences, Kunming, 650216 (China); Elmhamdi, Abouazza; Kordi, Ayman S. [Department of Physics and Astronomy, King Saud University, P.O. Box 2455, 11451 (Saudi Arabia); Su, Jiangtao [University of Chinese Academy of Sciences, Beijing 100049 (China); Liu, Ying D., E-mail: ydshen@ynao.ac.cn [State Key Laboratory of Space Weather, Chinese Academy of Sciences, Beijing 100190 (China)

2017-08-20

We present observational analysis of two successive two-sided loop jets observed by the ground-based New Vacuum Solar Telescope and the space-borne Solar Dynamics Observatory . The two successive two-sided loop jets manifested similar evolution processes and both were associated with the interaction of two small-scale adjacent filamentary threads, magnetic emerging, and cancellation processes at the jet’s source region. High temporal and high spatial resolution observations reveal that the two adjacent ends of the two filamentary threads are rooted in opposite magnetic polarities within the source region. The two threads approached each other, and then an obvious brightening patch is observed at the interaction position. Subsequently, a pair of hot plasma ejections are observed heading in opposite directions along the paths of the two filamentary threads at a typical speed for two-sided loop jets of the order 150 km s{sup −1}. Close to the end of the second jet, we report the formation of a bright hot loop structure at the source region, which suggests the formation of new loops during the interaction. Based on the observational results, we propose that the observed two-sided loop jets are caused by magnetic reconnection between the two adjacent filamentary threads, largely different from the previous scenario that a two-sided loop jet is generated by magnetic reconnection between an emerging bipole and the overlying horizontal magnetic fields.

Hierarchical resilience with lightweight threads

International Nuclear Information System (INIS)

Wheeler, Kyle Bruce

2011-01-01

This paper proposes methodology for providing robustness and resilience for a highly threaded distributed- and shared-memory environment based on well-defined inputs and outputs to lightweight tasks. These inputs and outputs form a failure 'barrier', allowing tasks to be restarted or duplicated as necessary. These barriers must be expanded based on task behavior, such as communication between tasks, but do not prohibit any given behavior. One of the trends in high-performance computing codes seems to be a trend toward self-contained functions that mimic functional programming. Software designers are trending toward a model of software design where their core functions are specified in side-effect free or low-side-effect ways, wherein the inputs and outputs of the functions are well-defined. This provides the ability to copy the inputs to wherever they need to be - whether that's the other side of the PCI bus or the other side of the network - do work on that input using local memory, and then copy the outputs back (as needed). This design pattern is popular among new distributed threading environment designs. Such designs include the Barcelona STARS system, distributed OpenMP systems, the Habanero-C and Habanero-Java systems from Vivek Sarkar at Rice University, the HPX/ParalleX model from LSU, as well as our own Scalable Parallel Runtime effort (SPR) and the Trilinos stateless kernels. This design pattern is also shared by CUDA and several OpenMP extensions for GPU-type accelerators (e.g. the PGI OpenMP extensions).

Influence of Micro Threads Alteration on Osseointegration and Primary Stability of Implants: An FEA and In Vivo Analysis in Rabbits.

Science.gov (United States)

Chowdhary, Ramesh; Halldin, Anders; Jimbo, Ryo; Wennerberg, Ann

2015-06-01

To describe the early bone tissue response to implants with and without micro threads designed to the full length of an oxidized titanium implant. A pair of two-dimensional finite element models was designed using a computer aided three-dimensional interactive application files of an implant model with micro threads in between macro threads and one without micro threads. Oxidized titanium implants with (test implants n=20) and without (control implants n=20) micro thread were prepared. A total of 12 rabbits were used and each received four implants. Insertion torque while implant placement and removal torque analysis after 4 weeks was performed in nine rabbits, and histomorphometric analysis in three rabbits, respectively. Finite element analysis showed less stress accumulation in test implant models with 31Mpa when compared with 62.2 Mpa in control implant model. Insertion and removal torque analysis did not show any statistical significance between the two implant designs. At 4 weeks, there was a significant difference between the two groups in the percentage of new bone volume and bone-to-implant contact in the femur (pmicro threads was prominent in the femur suggesting that micro threads promote bone formation. The stress distribution supported by the micro threads was especially effective in the cancellous bone. © 2013 Wiley Periodicals, Inc.

A Mathematical Model for Temperature Induced Loosening due to Radial Expansion of Rectangle Thread Bolted Joints

Directory of Open Access Journals (Sweden)

Shiyuan Hou

2015-01-01

Full Text Available This paper proposed a mathematical model to investigate the radial expansion induced loosening of rectangle thread bolted joints that were subjected to cyclic temperature variation, which could cause slippage between contact pairs of engaged threads and bolt bearing. Firstly, integral equations were derived for the shear stress components caused by expansion difference, as well as the bearing and thread friction torque components, which depended on the temperature variation. Secondly, the relationship of displacement components was developed based on quasi-static hypotheses. Then, treating the rotation of bolt as plastic elongation, the bolt tension's evolution was obtained by using a one-dimensional bolted joint model. Numerical results showed that the temperature variation decreased the bearing and thread friction torque components, which could lead bolted joint to loosen. Finally, the effects of some associated factors on the progress were discussed.

[Doctoral thesis: Demographic growth and economic and social development in Mali].

Science.gov (United States)

Dabo, K

1999-12-01

A doctoral thesis is described analyzing the relationships between demographic growth and economic and social development in Mali. The hypothesis is stated that demographic growth impedes economic development and any improvement in populations¿ standards of living. The hypothesis was verified using data for the period from 1960 to the present. Over that period, Mali conducted two general population censuses in 1976 and 1987, as well as several demographic research studies. The thesis is comprised of 4 parts, of which the first generally describes Mali. The second part analyzes the relationship between population growth and economic and social development in Mali. Study results are presented, followed by an analysis of the effects of economic and social development upon population growth in Mali through factors such as urbanization, education level, literacy, income, employment, occupation, gross domestic or gross national product by inhabitant, infant mortality rate, life expectancy at birth, contraceptive practice, fertility opinions and desires, women¿s status, and migration in Mali. Analysis indicates that Mali has not completely begun its demographic transition, but that traditional pronatalist behaviors are changing. Population policies and programs are explored in the third part of the thesis, followed by the fourth part which focuses upon methodological questions.

Guide for thesis and academic writing

OpenAIRE

2016-01-01

The thesis indicates a student’s expertise in understanding, applying and producing professional results in their own field. At its best the thesis is a bridge between studies and working life. This guide gives information following the general principles for thesis written in national working groups in 2005-2006. The guide can be applied in all degree programmes in Centria University of Applied Sciences. In addition, each field also has their own practices that will be explained in thesi...

Use of Nitrocarburizing for Strengthening Threaded Joints of Drill Pipes from Medium-Carbon Alloy Steels

Science.gov (United States)

Priymak, E. Yu.; Stepanchukova, A. V.; Yakovleva, I. L.; Tereshchenko, N. A.

2015-05-01

Nitrocarburizing is tested at the Drill Equipment Plant for reinforcing threaded joints of drill pipes for units with retrievable core receiver (RCR). The effect of the nitrocarburizing on the mechanical properties of steels of different alloying systems is considered. Steels for the production of threaded joints of drill pipes are recommended.

Multi-Threaded DNA Tag/Anti-Tag Library Generator for Multi-Core Platforms

Science.gov (United States)

2009-05-01

base pair)  Watson ‐ Crick  strand pairs that bind perfectly within pairs, but poorly across pairs. A variety  of  DNA  strand hybridization metrics...AFRL-RI-RS-TR-2009-131 Final Technical Report May 2009 MULTI-THREADED DNA TAG/ANTI-TAG LIBRARY GENERATOR FOR MULTI-CORE PLATFORMS...TYPE Final 3. DATES COVERED (From - To) Jun 08 – Feb 09 4. TITLE AND SUBTITLE MULTI-THREADED DNA TAG/ANTI-TAG LIBRARY GENERATOR FOR MULTI-CORE

A content analysis of the postgraduate thesis written on special education in turkey based on various variables (2009-2014

Directory of Open Access Journals (Sweden)

Mukaddes Sakalli Demirok

2016-06-01

Full Text Available Abstract The aim of this study was to examine postgraduate thesis studies conducted between the years of 2009 and 2014 in special education field in Turkey based on various variables and figure out how many of these thesis is related with hearing disability. A total number of 146 postgraduate thesis have been found in the thesis scanning center of Higher Education Council (YOK of Turkey. 126 of these thesis were master thesis and 20 of them were doctorate thesis. Data of the research were analyzed in SPSS 20.0 program. According to the results, it was revealed that quantitative method is the most preferred method in postgraduate thesis and there is much more number of master thesis than doctorate thesis. According to the distribution of thesis based on disability group, thesis are mostly related with special education and there is least number of thesis related with dyslexia. Besides, there were not much number of studies conducted with individuals with disability. Recommendations and implications for further research are also provided based on the results.

A Multi-Threaded Cryptographic Pseudorandom Number Generator Test Suite

Science.gov (United States)

2016-09-01

bitcoin thieves, Google releases patch. (2013, Aug. 16). SiliconANGLE. [Online]. Available: http://siliconangle.com/blog/2013/ 08/16/android-crypto-prng...flaw-aided- bitcoin -thieves-google-releases-patch/ [5] M. Gondree. (2014, Sep. 28). NPS POSIX thread pool library. [Online]. Available: https

Use of barbed threads in facial rejuvenation.

Science.gov (United States)

Kalra, Rakesh

2008-10-01

Use of barbed threads, available with uni- and bi-directional cogs or barbs, is a semi-invasive method of lifting sagging skin of the face. Areas treated with this method include the eyebrows, the cheeks, the jowls and the neck. Ease of use and a shorter down-time have made their use popular. Specific indications, operative procedures, risks and complications are described and some clinical results of the author shown.

NUMA-Aware Thread Scheduling for Big Data Transfers over Terabits Network Infrastructure

Directory of Open Access Journals (Sweden)

Taeuk Kim

2018-01-01

Full Text Available The evergrowing trend of big data has led scientists to share and transfer the simulation and analytical data across the geodistributed research and computing facilities. However, the existing data transfer frameworks used for data sharing lack the capability to adopt the attributes of the underlying parallel file systems (PFS. LADS (Layout-Aware Data Scheduling is an end-to-end data transfer tool optimized for terabit network using a layout-aware data scheduling via PFS. However, it does not consider the NUMA (Nonuniform Memory Access architecture. In this paper, we propose a NUMA-aware thread and resource scheduling for optimized data transfer in terabit network. First, we propose distributed RMA buffers to reduce memory controller contention in CPU sockets and then schedule the threads based on CPU socket and NUMA nodes inside CPU socket to reduce memory access latency. We design and implement the proposed resource and thread scheduling in the existing LADS framework. Experimental results showed from 21.7% to 44% improvement with memory-level optimizations in the LADS framework as compared to the baseline without any optimization.

Online thesis guidance management information system

Science.gov (United States)

Nasution, T. H.; Pratama, F.; Tanjung, K.; Siregar, I.; Amalia, A.

2018-03-01

The development of internet technology in education is still not maximized, especially in the process of thesis guidance between students and lecturers. Difficulties met the lecturers to help students during thesis guidance is the limited communication time and the compatibility of schedule between students and lecturer. To solve this problem, we designed an online thesis guidance management information system that helps students and lecturers to do thesis tutoring process anytime, anywhere. The system consists of a web-based admin app for usage management and an android-based app for students and lecturers.

Pearling Instabilities of a Viscoelastic Thread

Science.gov (United States)

Deblais, A.; Velikov, K. P.; Bonn, D.

2018-05-01

Pearling instabilities of slender viscoelastic threads have received much attention, but remain incompletely understood. We study the instabilities in polymer solutions subject to uniaxial elongational flow. Two distinctly different instabilites are observed: beads on a string and blistering. The beads-on-a-string structure arises from a capillary instability whereas the blistering instability has a different origin: it is due to a coupling between stress and polymer concentration. By varying the temperature to change the solution properties we elucidate the interplay between flow and phase separation.

Use of barbed threads in facial rejuvenation

Directory of Open Access Journals (Sweden)

Kalra Rakesh

2008-10-01

Full Text Available Use of barbed threads, available with uni- and bi-directional cogs or barbs, is a semi-invasive method of lifting sagging skin of the face. Areas treated with this method include the eyebrows, the cheeks, the jowls and the neck. Ease of use and a shorter down-time have made their use popular. Specific indications, operative procedures, risks and complications are described and some clinical results of the author shown.

Role of Marangoni stress during breakup of surfactant-covered liquid threads: Reduced rates of thinning and microthread cascades

Science.gov (United States)

Kamat, Pritish M.; Wagoner, Brayden W.; Thete, Sumeet S.; Basaran, Osman A.

2018-04-01

Adsorption onto and lowering of surface tension σ of fluid interfaces by surfactants is exploited in drop formation (e.g., inkjet printing) where a thinning liquid thread (radius h ) connects an about-to-form drop to the liquid that remains hanging from the nozzle when the former falls from it. Surfactants can affect thread pinch-off in two ways: first, by lowering σ , they lower capillary pressure (σ /h ), and second, as surfactant concentration along the interface can be nonuniform, they cause the interface to be subjected to a surface tension gradient or Marangoni stress. Recent studies show that the location where the thread breaks is devoid of surfactant, and others assert that the influence of Marangoni stress on pinch-off is negligible. We demonstrate by simulations and experiments that surfactants play a major role in drop formation and that Marangoni stresses acting near but not at the pinch point give rise to reduced rates of thread thinning and formation of multiple microthreads that distinguish pinch-off of surfactant-covered threads from surfactant-free ones. Thinning at finite Reynolds and Peclet numbers, Re and Pe, is shown to exhibit intermediate scaling regimes that have heretofore only been observed during pinch-off of threads undergoing creeping flow (Re=0 ) while convection of surfactant is weak compared to its diffusion (Pe<1 ).

[Integrated Development of Full-automatic Fluorescence Analyzer].

Science.gov (United States)

Zhang, Mei; Lin, Zhibo; Yuan, Peng; Yao, Zhifeng; Hu, Yueming

2015-10-01

In view of the fact that medical inspection equipment sold in the domestic market is mainly imported from abroad and very expensive, we developed a full-automatic fluorescence analyzer in our center, presented in this paper. The present paper introduces the hardware architecture design of FPGA/DSP motion controlling card+PC+ STM32 embedded micro processing unit, software system based on C# multi thread, design and implementation of double-unit communication in detail. By simplifying the hardware structure, selecting hardware legitimately and adopting control system software to object-oriented technology, we have improved the precision and velocity of the control system significantly. Finally, the performance test showed that the control system could meet the needs of automated fluorescence analyzer on the functionality, performance and cost.

Large Scale Document Inversion using a Multi-threaded Computing System.

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2017-06-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

Parallel Void Thread in Long-Reach Ethernet Passive Optical Networks

KAUST Repository

Elrasad, Amr; Shihada, Basem

2015-01-01

This work investigates void filling (idle periods) in long-reach Ethernet passive optical networks. We focus on reducing grant delays and hence reducing the average packet delay. We introduce a novel approach called parallel void thread (PVT), which

Thread-Lift Sutures: Still in the Lift? A Systematic Review of the Literature.

Science.gov (United States)

Gülbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

2018-03-01

In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have passed, the authors now performed again a systematic review to determine the real scientific current state of the art on the use of thread-lift sutures. A systematic review was performed according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines using the PubMed database and using the Medical Subject Headings search term "Rhytidoplasty." "Rhytidoplasty" and the following entry terms were included by this Medical Subject Headings term: "facelift," "facelifts," "face Lift," "Face Lifts," "Lift," "Face," "Lifts," "Platysmotomy," "Platysmotomies," "Rhytidectomy," "Rhytidectomies," "Platysmaplasty," "and "Platysmaplasties." The Medical Subject Headings term "Rhytidoplasty" was combined with the following search terms: "Barbed suture," "Thread lift," "APTOS," "Suture suspension," "Percutaneous," and "Silhouette suture." RefWorks was used to filter duplicates. Three of the authors (H.A.G., B.C., and B.L.) performed the search independently. The initial search with all search terms resulted in 188 articles. After filtering the duplicates and the articles about open procedures, a total of 41 articles remained. Of these, the review articles, case reports, and letters to the editor were subsequently excluded, as were reports dealing with nonbarbed sutures, such as Vicryl and Prolene with Gore-Tex. This resulted in a total of 12 articles, seven additional articles since the five articles reviewed by Villa et al. The authors' review demonstrated that, within the past decade, little or no substantial evidence has been added to the peer-reviewed literature to support or sustain the promising statement about thread-lift sutures as made by Villa et al. in 2006 in terms of

Exploring the thesis experience of Master of Health professions education graduates: a qualitative study.

Science.gov (United States)

Skeith, Leslie; Ridinger, Heather; Srinivasan, Sushant; Givi, Babak; Youssef, Nazih; Harris, Ilene

2018-04-27

To explore the thesis experience of recent Master of Health Professions Education (MHPE) graduates in the University of Illinois at Chicago (UIC) program. This is a qualitative case study exploring the experience of MHPE graduates between 2014 and 2016 (n=31). Using convenience sampling, all graduates with an email address (n=30) were invited to participate in an online survey and semi-structured interviews. Interviews were completed in-person or via telephone or video conference; interviewers collected detailed notes and audio recordings.  Two authors independently analyzed the data iteratively using thematic analysis and discrepancies were discussed and resolved. Survey results (n=20, 67%) revealed an average graduation of 5.1 years; 10 graduates (33%) were interviewed. Three themes related to the thesis experience were identified: success factors, challenges, and outcomes. Success factors, when present, promoted completion of a thesis; these included: a supportive program environment, time management, available resources, MHPE foundational coursework, aligning theses with career goals, and identifying a project with limited scope. Challenges made thesis completion more difficult for graduates; these included: institutional factors, personal or professional responsibilities, burnout, externally-imposed deadlines, and barriers in the research process. Despite these challenges, completing the thesis resulted in many professional or personal benefits (outcomes). Multiple success factors and challenges were identified in the master's thesis process among MHPE graduates at UIC. These findings can help students conducting education-based scholarship through the master's thesis process. This study also informs program evaluation and improvements and outlines personal and professional outcomes of completing a master's thesis.

Data Mining Thesis Topics in Finland

OpenAIRE

Bajo Rouvinen, Ari

2017-01-01

The Theseus open repository contains metadata about more than 100,000 thesis publications from the different universities of applied sciences in Finland. Different data mining techniques were applied to the Theseus dataset to build a web application to explore thesis topics and degree programmes using different libraries in Python and JavaScript. Thesis topics were extracted from manually annotated keywords by the authors and curated subjects by the librarians. During the project, the quality...

Weaving colourful threads: A tapestry of spirituality and mysticism

African Journals Online (AJOL)

2015-09-29

Sep 29, 2015 ... contributing to a discussion of these issues, it is hoped that the threads of spirituality and ... has been described as an 'applause-word'2 and is widely used in medicine, business, education, ..... of morality in teaching spirituality: 'If we as educators […] ..... William James ([1902] 1982), is worth quoting here:.

Thesis Proposal

DEFF Research Database (Denmark)

Sloth, Erik

2010-01-01

Strukturen i Thesis proposal er følgende: Først præsenteres mine konkrete empiriske forskningsprojekter som skal munde ud i afhandlingens artikler. Jeg præsenterer herefter de teoretiske overvejelser omkring oplevelsesbegrebet og forbrugerkulturteori som danner baggrund for at jeg er nået frem til...

Assessment of dental student satisfaction with regard to process of thesis educational courses.

Science.gov (United States)

Eslamipour, Faezeh; Noroozi, Zahra; Hosseinpour, Kobra

2015-01-01

Ensuring achievement of research experience by students is one of the most important goals of the thesis-conduction process and evaluation of student satisfaction with this process is one of the most imperative challenges herein. The aim of this study is to investigate the satisfaction of dental students passing the thesis educational course from the Isfahan Dental School. Sixty-two dental students who had graduated in2011, from the Isfahan Dental School, participated in this descriptive cross-sectional study. The postgraduate Research Experience Questionnaire (PREQ) was used for data collection. The questionnaire evaluated student satisfaction in seven domains: Thesis supervision, skill development, intellectual climate, infrastructure, thesis examination, goals and expectations, and overall satisfaction. The data were analyzed on an SPSS software using descriptive and inferential statistics. The mean score of satisfaction of the participants was 75 ± 12. On the basis of their scores, satisfaction in 3.2% of them was slow, in 33.9%was medium, in 61.3% was good and in 1.6% was high. The highest satisfaction was found to be in thesis supervision and the least was in the intellectual climate domain. There was no significant statistical difference between satisfaction and gender (P = 0.46). Considering the results, to increase student satisfaction for passing the thesis courses, it is necessary to improve the intellectual climate in dental schools and also increase the research budget for more financial support of students to carry out their projects.

Large Scale Document Inversion using a Multi-threaded Computing System

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2018-01-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. CCS Concepts •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

Clinical leadership as an integral curriculum thread in pre-registration nursing programmes.

Science.gov (United States)

Brown, Angela; Dewing, Jan; Crookes, Patrick

2016-03-01

In recent years there has been a growth in leadership development frameworks in health for the existing workforce. There has also been a related abundance of leadership programmes developed specifically for qualified nurses. There is a groundswell of opinion that clinical leadership preparation needs to extend to preparatory programmes leading to registration as a nurse. To this end a doctoral research study has been completed that focused specifically on the identification and verification of the antecedents of clinical leadership (leadership and management) so they can shape the curriculum content and the best way to deliver the curriculum content as a curriculum thread. To conceptualise how the curriculum content, identified and verified empirically, can be structured within a curriculum thread and to contribute to the discussion on effective pedagogical approaches and educational strategies for learning and teaching of clinical leadership. A multi-method design was utilised in the research in Australia. Drawing on core principles in critical social theory, an integral curriculum thread is proposed for pre-registration nursing programmes that identifies the antecedents of clinical leadership; the core concepts, together with the continuum of enlightenment, empowerment, and emancipation. The curriculum content, the effective pedagogical approaches and the educational strategies are supported theoretically and we believe this offers a design template for action and a way of thinking about this important aspect of preparatory nursing education. Moreover, we hope to have created a process contributing to a heighten sense of awareness in the nursing student (and other key stakeholders) of the what, how and when of clinical leadership for a novice registered nurse. The next stage is to further test through research the proposed integral curriculum thread. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hair-Thread Tourniquet Syndrome

Directory of Open Access Journals (Sweden)

Emre Gokcen

2016-01-01

Two month-old male infant was brought to the emergency service with the complaint of fever, uneasiness, and swelling on 4th-5th toes of right foot.  Apparent swelling, rubescence and increase in heat were seen and a constrictive band was observed to surround proximal phalanges of both toes in the physical examination of the patient (Figure 1.  A hair was found on the constrictive band surrounding both toes. The hair was removed by means of forceps. Oral antibiotic was administered to the patient. The patient was treated successfully by not letting a necrosis develop on the toes. It should be remembered that hair-thread tourniquet syndrome may be observed in the infant patients applying to the hospital with the complaints of unexplained fever and uneasiness. Figure 1: Appearance of the toes right after the hair was removed. Arrows show the constrictive band. 

Opinions of Students Completing Master Thesis in Turkish Education Field about Academic Writing and Thesis Formation Process

OpenAIRE

Mustafa Onur KAN; Fatma Nur GEDİK

2016-01-01

The overall aim of this research is to evaluate opinions of students completing master thesis in the field of Turkish education about academic writing and process of forming thesis. The study has been devised using phenomenological design within the qualitative research methods. The study group of research is consisted of 9 participants completed master thesis in the field of Turkish education at Mustafa Kemal University Instıtute of Social Sciences in 2015. In this study, semi-structured int...

Integrated management of thesis using clustering method

Science.gov (United States)

Astuti, Indah Fitri; Cahyadi, Dedy

2017-02-01

Thesis is one of major requirements for student in pursuing their bachelor degree. In fact, finishing the thesis involves a long process including consultation, writing manuscript, conducting the chosen method, seminar scheduling, searching for references, and appraisal process by the board of mentors and examiners. Unfortunately, most of students find it hard to match all the lecturers' free time to sit together in a seminar room in order to examine the thesis. Therefore, seminar scheduling process should be on the top of priority to be solved. Manual mechanism for this task no longer fulfills the need. People in campus including students, staffs, and lecturers demand a system in which all the stakeholders can interact each other and manage the thesis process without conflicting their timetable. A branch of computer science named Management Information System (MIS) could be a breakthrough in dealing with thesis management. This research conduct a method called clustering to distinguish certain categories using mathematics formulas. A system then be developed along with the method to create a well-managed tool in providing some main facilities such as seminar scheduling, consultation and review process, thesis approval, assessment process, and also a reliable database of thesis. The database plays an important role in present and future purposes.

A likelihood-based framework for the analysis of discussion threads

NARCIS (Netherlands)

Gómez, Vincenc; Kappen, Hilbert J.; Litvak, Nelli; Kaltenbrunner, Andreas

2013-01-01

Online discussion threads are conversational cascades in the form of posted messages that can be generally found in social systems that comprise many-to-many interaction such as blogs, news aggregators or bulletin board systems. We propose a framework based on generative models of growing trees to

Single-Thread-Based Wearable and Highly Stretchable Triboelectric Nanogenerators and Their Applications in Cloth-Based Self-Powered Human-Interactive and Biomedical Sensing

KAUST Repository

Lai, Ying-Chih

2016-11-03

The development of wearable and large-area fabric energy harvester and sensor has received great attention due to their promising applications in next-generation autonomous and wearable healthcare technologies. Here, a new type of “single” thread-based triboelectric nanogenerator (TENG) and its uses in elastically textile-based energy harvesting and sensing have been demonstrated. The energy-harvesting thread composed by one silicone-rubber-coated stainless-steel thread can extract energy during contact with skin. With sewing the energy-harvesting thread into a serpentine shape on an elastic textile, a highly stretchable and scalable TENG textile is realized to scavenge various kinds of human-motion energy. The collected energy is capable to sustainably power a commercial smart watch. Moreover, the simplified single triboelectric thread can be applied in a wide range of thread-based self-powered and active sensing uses, including gesture sensing, human-interactive interfaces, and human physiological signal monitoring. After integration with microcontrollers, more complicated systems, such as wireless wearable keyboards and smart beds, are demonstrated. These results show that the newly designed single-thread-based TENG, with the advantage of interactive, responsive, sewable, and conformal features, can meet application needs of a vast variety of fields, ranging from wearable and stretchable energy harvesters to smart cloth-based articles.

Single-Thread-Based Wearable and Highly Stretchable Triboelectric Nanogenerators and Their Applications in Cloth-Based Self-Powered Human-Interactive and Biomedical Sensing

KAUST Repository

Lai, Ying-Chih; Deng, Jianan; Zhang, Steven L.; Niu, Simiao; Guo, Hengyu; Wang, Zhong Lin

2016-01-01

The development of wearable and large-area fabric energy harvester and sensor has received great attention due to their promising applications in next-generation autonomous and wearable healthcare technologies. Here, a new type of “single” thread-based triboelectric nanogenerator (TENG) and its uses in elastically textile-based energy harvesting and sensing have been demonstrated. The energy-harvesting thread composed by one silicone-rubber-coated stainless-steel thread can extract energy during contact with skin. With sewing the energy-harvesting thread into a serpentine shape on an elastic textile, a highly stretchable and scalable TENG textile is realized to scavenge various kinds of human-motion energy. The collected energy is capable to sustainably power a commercial smart watch. Moreover, the simplified single triboelectric thread can be applied in a wide range of thread-based self-powered and active sensing uses, including gesture sensing, human-interactive interfaces, and human physiological signal monitoring. After integration with microcontrollers, more complicated systems, such as wireless wearable keyboards and smart beds, are demonstrated. These results show that the newly designed single-thread-based TENG, with the advantage of interactive, responsive, sewable, and conformal features, can meet application needs of a vast variety of fields, ranging from wearable and stretchable energy harvesters to smart cloth-based articles.

Influence of Industrial Washing and Cyclic Fatigue on Slippage of Linen Fabric Threads along the Seam

Directory of Open Access Journals (Sweden)

Irina KORUNČAK

2014-04-01

Full Text Available All seams of garments shall withstand the established force effect in the longitudinal and transverse directions. Resistance to thread slippage along the seam is a major property of fabrics that is regulated by strict guidelines. In many research works, lining fabrics are chosen as the object of research as thread slippage is the most typical of them. What concerns the reports exploring slippage of linen fabric threads along the seam, just very few papers are available. Studies dealing with the influence made by industrial washing and cyclic load on the defect under investigation, thereby taking into account operational properties of garments are not readily available at all. The objective of the paper is to define the influence of industrial washing and cyclic tensile on slippage of linen fabric threads along the seam. For the research, five 100 % linen fabrics of plain weave have been selected. Control test specimens, unwashed and processed with different washing methods, have been analysed. Cyclic tensile of the test specimens has been carried out by a tensile machine “Tinius Olsen” at tensile force P = 20 N, tensile speed of 12.55 mm/s, number of cycles of 100. The carried-out testing has demonstrated that industrial washing decreased resistance of linen fabrics to thread slippage along the seam in the most cases. Analysis of the results obtained has shown that cyclic tensile led to particularly significant increase in the seam gap. DOI: http://dx.doi.org/10.5755/j01.ms.20.1.2486

Bibliomtric overview of thesis and dissertations on indigenous education

Directory of Open Access Journals (Sweden)

Alexandre Masson Maroldi

2017-10-01

Full Text Available ABSTRACT. The indigenous education in Brazil has its founding milestone in the first catechetical actions of the Jesuits in the second half of the sixteenth century. In this long trajectory up to the present day the education of the indigenous peoples that inhabit the Brazilian territory has been the subject of controversies and discussions at the governmental and academic levels, which has generated numerous studies. This research had as objective to elaborate a bibliometric panorama of the scientific production on indigenous education present in theses and dissertations of the Brazilian Digital Library of Thesis and Dissertations (BDTD / IBICT through bibliometric methodology. The corpus analyzed was composed of 173 postgraduate studies defended in the country between 1996 and 2016. The results indicate that the Southeast and South regions, respectively, concentrate the largest number of papers and that the Education area is the majority in the Scientific production of the thesis and dissertations recovered.

Theoretical prediction of pullout strengths for dental and orthopaedic screws with conical profile and buttress threads.

Science.gov (United States)

Shih, Kao-Shang; Hou, Sheng-Mou; Lin, Shang-Chih

2017-12-01

The pullout strength of a screw is an indicator of how secure bone fragments are being held in place. Such bone-purchasing ability is sensitive to bone quality, thread design, and the pilot hole, and is often evaluated by experimental and numerical methods. Historically, there are some mathematical formulae to simulate the screw withdrawal from the synthetic bone. There are great variations in screw specifications. However, extensive investigation of the correlation between experimental and analytical results has not been reported in literature. Referring to the literature formulae, this study aims to evaluate the differences in the calculated pullout strengths. The pullout tests of the surgical screws are measured and the sawbone is used as the testing block. The absolute errors and correlation coefficients of the experimental and analytical results are calculated as the comparison baselines of the formulae. The absolute error of the dental, traumatic, and spinal groups are 21.7%, 95.5%, and 37.0%, respectively. For the screws with a conical profile and/or tiny threads, the calculated and measured results are not well correlated. The formulae are not accurate indicators of the pullout strengths of the screws where the design parameters are slightly varied. However, the experimental and numerical results are highly correlated for the cylindrical screws. The pullout strength of a conical screw is higher than that of its counterpart, but all formulae consistently predict the opposite results. In general, the bony purchase of the buttress threads is securer than that of the symmetric thread. An absolute error of up to 51.4% indicates the theoretical results cannot predict the actual value of the pullout strength. Only thread diameter, pitch, and depth are considered in the investigated formulae. The thread profile and shape should be formulated to modify the slippage mechanism at the bone-screw interfaces and simulate the strength change in the squeezed bones

MAGNETOHYDRODYNAMIC WAVES IN A PARTIALLY IONIZED FILAMENT THREAD

International Nuclear Information System (INIS)

Soler, R.; Oliver, R.; Ballester, J. L.

2009-01-01

Oscillations and propagating waves are commonly seen in high-resolution observations of filament threads, i.e., the fine-structures of solar filaments/prominences. Since the temperature of prominences is typically of the order of 10 4 K, the prominence plasma is only partially ionized. In this paper, we study the effect of neutrals on the wave propagation in a filament thread modeled as a partially ionized homogeneous magnetic flux tube embedded in an homogeneous and fully ionized coronal plasma. Ohmic and ambipolar magnetic diffusion are considered in the basic resistive magnetohydrodynamic (MHD) equations. We numerically compute the eigenfrequencies of kink, slow, and Alfven linear MHD modes and obtain analytical approximations in some cases. We find that the existence of propagating modes is constrained by the presence of critical values of the longitudinal wavenumber. In particular, the lower and upper frequency cutoffs of kink and Alfven waves owe their existence to magnetic diffusion parallel and perpendicular to magnetic field lines, respectively. The slow mode only has a lower frequency cutoff, which is caused by perpendicular magnetic diffusion and is significantly affected by the ionization degree. In addition, ion-neutral collision is the most efficient damping mechanism for short wavelengths, while ohmic diffusion dominates in the long-wavelength regime.

Electrical current leakage and open-core threading dislocations in AlGaN-based deep ultraviolet light-emitting diodes

International Nuclear Information System (INIS)

Moseley, Michael; Allerman, Andrew; Crawford, Mary; Wierer, Jonathan J.; Smith, Michael; Biedermann, Laura

2014-01-01

Electrical current transport through leakage paths in AlGaN-based deep ultraviolet (DUV) light-emitting diodes (LEDs) and their effect on LED performance are investigated. Open-core threading dislocations, or nanopipes, are found to conduct current through nominally insulating Al 0.7 Ga 0.3 N layers and limit the performance of DUV-LEDs. A defect-sensitive phosphoric acid etch reveals these open-core threading dislocations in the form of large, micron-scale hexagonal etch pits visible with optical microscopy, while closed-core screw-, edge-, and mixed-type threading dislocations are represented by smaller and more numerous nanometer-scale pits visible by atomic-force microscopy. The electrical and optical performances of DUV-LEDs fabricated on similar Si-doped Al 0.7 Ga 0.3 N templates are found to have a strong correlation to the density of these nanopipes, despite their small fraction (<0.1% in this study) of the total density of threading dislocations

Detection of fine magnetic particles coated on a thread using an HTS-SQUID

International Nuclear Information System (INIS)

Kawagishi, K.; Itozaki, H.; Kondo, T.; Komori, K.; Koetitz, R.

2004-01-01

Polymer-coated magnetic particles, which contain superparamagnetic ferrite nanoparticles, were attached to a nylon thread of 0.35 mm in diameter and were detected by an HTS-SQUID. The length of the sample attached into the thread was within 3 mm and its interval was 30 mm. The particles were magnetized by a coil applied dc field or by a magnet of 1.4 T. The thread ran 2 mm under the SQUID with 20-100 mm/s of the rate. Signals of magnetic beads were detected and the peak-to-peak amplitude of the signals was directly proportional to the applied field and the weight of the magnetic particles. Obtained peak-to-peak amplitude for 20 ng of magnetite particles was 350 pT at 0.25 mT of applied dc field with noise of 18 pT, and estimated detection limit was 10 ng. S/N ratio was improved by the remanence measurement using the magnet and 5.8 ng of detection limit was obtained. This measurement has been proved to be promising for the continuous analysis of ultra dilute DNA solution

Where's Your Thesis Statement and What Happened to Your Topic Sentences? Identifying Organizational Challenges in Undergraduate Student Argumentative Writing

Science.gov (United States)

Miller, Ryan T.; Pessoa, Silvia

2016-01-01

The authors examine the challenges students faced in trying to write organized texts using effective thesis statements and topic sentences by analyzing argumentative history essays written by multilingual students enrolled in an undergraduate history course. They use the notions of macro-Theme (i.e., thesis statement) and hyper-Theme (i.e., topic…

Personality Types and Learners' Interaction in Web-Based Threaded Discussion

Science.gov (United States)

Lee, JeongMin; Lee, Youngmin

2006-01-01

This study examined the effects of group composition based on the learners' personality types as measured by the Myers-Briggs type indicator as they interacted in threaded discussions. Three groups comprised introverts, extroverts, and mixed introvert-extrovert classifications. Ninety-six participants were divided into 24 groups of 4 participants…

The Effects of using VoiceThread on Students’ Listening Comprehension and Attitudes Toward using VoiceThread

Directory of Open Access Journals (Sweden)

Oraib Mango

2017-06-01

Full Text Available The current study investigated the effects of the use of VoiceThread (VT on the listening comprehension and attitudes of college students of Arabic as a foreign language. Thirty-five students in two 10-week classes of beginning Arabic participated in this study. The instruction in both classes was the same except that, for one group, the instruction was supplemented by the use of VT to enhance listening and speaking skills during the 10 weeks. Upon completion of the class, students using VT showed superior listening skills. Moreover, an Attitude and Engagement survey showed that the students enjoyed using VT and viewed it as a valuable tool that enhanced their language learning.

Process and device to set a separated helicoid thread in a large diameter tapped hole and use of this process and device

International Nuclear Information System (INIS)

Dworaczek, J.P.; Grypczynski, D.

1992-01-01

In a PWR reactor the vessel head is fixed to the reactor vessel by the vessel flange and closure studs. If the thread machined in the vessel flange is damaged or worn out, a separate thread, rolled up on a tapped drum is screwed in the tapped opening and the thread is fixed by a pin

Preload, Coefficient of Friction, and Thread Friction in an Implant-Abutment-Screw Complex.

Science.gov (United States)

Wentaschek, Stefan; Tomalla, Sven; Schmidtmann, Irene; Lehmann, Karl Martin

To examine the screw preload, coefficient of friction (COF), and tightening torque needed to overcome the thread friction of an implant-abutment-screw complex. In a customized load frame, 25 new implant-abutment-screw complexes including uncoated titanium alloy screws were torqued and untorqued 10 times each, applying 25 Ncm. Mean preload values decreased significantly from 209.8 N to 129.5 N according to the number of repetitions. The overall COF increased correspondingly. There was no comparable trend for the thread friction component. These results suggest that the application of a used implant-abutment-screw complex may be unfavorable for obtaining optimal screw preload.

Protein structure recognition: From eigenvector analysis to structural threading method

Science.gov (United States)

Cao, Haibo

In this work, we try to understand the protein folding problem using pair-wise hydrophobic interaction as the dominant interaction for the protein folding process. We found a strong correlation between amino acid sequence and the corresponding native structure of the protein. Some applications of this correlation were discussed in this dissertation include the domain partition and a new structural threading method as well as the performance of this method in the CASP5 competition. In the first part, we give a brief introduction to the protein folding problem. Some essential knowledge and progress from other research groups was discussed. This part include discussions of interactions among amino acids residues, lattice HP model, and the designablity principle. In the second part, we try to establish the correlation between amino acid sequence and the corresponding native structure of the protein. This correlation was observed in our eigenvector study of protein contact matrix. We believe the correlation is universal, thus it can be used in automatic partition of protein structures into folding domains. In the third part, we discuss a threading method based on the correlation between amino acid sequence and ominant eigenvector of the structure contact-matrix. A mathematically straightforward iteration scheme provides a self-consistent optimum global sequence-structure alignment. The computational efficiency of this method makes it possible to search whole protein structure databases for structural homology without relying on sequence similarity. The sensitivity and specificity of this method is discussed, along with a case of blind test prediction. In the appendix, we list the overall performance of this threading method in CASP5 blind test in comparison with other existing approaches.

Protein Structure Recognition: From Eigenvector Analysis to Structural Threading Method

Energy Technology Data Exchange (ETDEWEB)

Cao, Haibo [Iowa State Univ., Ames, IA (United States)

2003-01-01

In this work, they try to understand the protein folding problem using pair-wise hydrophobic interaction as the dominant interaction for the protein folding process. They found a strong correlation between amino acid sequences and the corresponding native structure of the protein. Some applications of this correlation were discussed in this dissertation include the domain partition and a new structural threading method as well as the performance of this method in the CASP5 competition. In the first part, they give a brief introduction to the protein folding problem. Some essential knowledge and progress from other research groups was discussed. This part includes discussions of interactions among amino acids residues, lattice HP model, and the design ability principle. In the second part, they try to establish the correlation between amino acid sequence and the corresponding native structure of the protein. This correlation was observed in the eigenvector study of protein contact matrix. They believe the correlation is universal, thus it can be used in automatic partition of protein structures into folding domains. In the third part, they discuss a threading method based on the correlation between amino acid sequences and ominant eigenvector of the structure contact-matrix. A mathematically straightforward iteration scheme provides a self-consistent optimum global sequence-structure alignment. The computational efficiency of this method makes it possible to search whole protein structure databases for structural homology without relying on sequence similarity. The sensitivity and specificity of this method is discussed, along with a case of blind test prediction. In the appendix, they list the overall performance of this threading method in CASP5 blind test in comparison with other existing approaches.

Protein Structure Recognition: From Eigenvector Analysis to Structural Threading Method

International Nuclear Information System (INIS)

Haibo Cao

2003-01-01

In this work, they try to understand the protein folding problem using pair-wise hydrophobic interaction as the dominant interaction for the protein folding process. They found a strong correlation between amino acid sequences and the corresponding native structure of the protein. Some applications of this correlation were discussed in this dissertation include the domain partition and a new structural threading method as well as the performance of this method in the CASP5 competition. In the first part, they give a brief introduction to the protein folding problem. Some essential knowledge and progress from other research groups was discussed. This part includes discussions of interactions among amino acids residues, lattice HP model, and the design ability principle. In the second part, they try to establish the correlation between amino acid sequence and the corresponding native structure of the protein. This correlation was observed in the eigenvector study of protein contact matrix. They believe the correlation is universal, thus it can be used in automatic partition of protein structures into folding domains. In the third part, they discuss a threading method based on the correlation between amino acid sequences and ominant eigenvector of the structure contact-matrix. A mathematically straightforward iteration scheme provides a self-consistent optimum global sequence-structure alignment. The computational efficiency of this method makes it possible to search whole protein structure databases for structural homology without relying on sequence similarity. The sensitivity and specificity of this method is discussed, along with a case of blind test prediction. In the appendix, they list the overall performance of this threading method in CASP5 blind test in comparison with other existing approaches

Feasibility of the reversal and substitute element technique for thread calibration

DEFF Research Database (Denmark)

Larsen, Erik; Carmignato, Simone; De Chiffre, Leonardo

. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB...

Density of bunched threading dislocations in epitaxial GaN layers as determined using X-ray diffraction

Science.gov (United States)

Barchuk, M.; Holý, V.; Rafaja, D.

2018-04-01

X-ray diffraction is one of the most popular experimental methods employed for determination of dislocation densities, as it can recognize both the strain fields and the local lattice rotations produced by dislocations. The main challenge of the quantitative analysis of the dislocation density is the formulation of a suitable microstructure model, which describes the dislocation arrangement and the effect of the interactions between the strain fields from neighboring dislocations reliably in order to be able to determine the dislocation densities precisely. The aim of this study is to prove the capability of X-ray diffraction and two computational methods, which are frequently used for quantification of the threading dislocation densities from X-ray diffraction measurements, in the special case of partially bunched threading dislocations. The first method is based on the analysis of the dislocation-controlled crystal mosaicity, and the other one on the analysis of diffuse X-ray scattering from threading dislocations. The complementarity of both methods is discussed. Furthermore, it is shown how the complementarity of these methods can be used to improve the results of the quantitative analysis of bunched and thus inhomogeneously distributed threading dislocations and to get a better insight into the dislocation arrangement.

Automatic Thread-Level Parallelization in the Chombo AMR Library

Energy Technology Data Exchange (ETDEWEB)

Christen, Matthias; Keen, Noel; Ligocki, Terry; Oliker, Leonid; Shalf, John; Van Straalen, Brian; Williams, Samuel

2011-05-26

The increasing on-chip parallelism has some substantial implications for HPC applications. Currently, hybrid programming models (typically MPI+OpenMP) are employed for mapping software to the hardware in order to leverage the hardware?s architectural features. In this paper, we present an approach that automatically introduces thread level parallelism into Chombo, a parallel adaptive mesh refinement framework for finite difference type PDE solvers. In Chombo, core algorithms are specified in the ChomboFortran, a macro language extension to F77 that is part of the Chombo framework. This domain-specific language forms an already used target language for an automatic migration of the large number of existing algorithms into a hybrid MPI+OpenMP implementation. It also provides access to the auto-tuning methodology that enables tuning certain aspects of an algorithm to hardware characteristics. Performance measurements are presented for a few of the most relevant kernels with respect to a specific application benchmark using this technique as well as benchmark results for the entire application. The kernel benchmarks show that, using auto-tuning, up to a factor of 11 in performance was gained with 4 threads with respect to the serial reference implementation.

A PREDICTABLE MULTI-THREADED MAIN-MEMORY STORAGE MANAGER

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

This paper introduces the design and implementation of a predictable multi-threaded main-memo- ry storage manager (CS20), and emphasizes the database service mediator(DSM), an operation prediction model using exponential averaging. The memory manager, indexing, as well as lock manager in CS20 are also presented briefly. CS20 has been embedded in a mobile telecommunication service system. Practice showed, DSM effectively controls system load and hence improves the real-time characteristics of data accessing.

Assessment of deposits and the aqueous medium of thread holes of primary collector flanges

International Nuclear Information System (INIS)

Splichal, K.; Burda, J.; Rybka, R.; Zamboch, M.

1996-10-01

The parameters of the local environment of primary header thread holes were determined based on analysis of the aqueous medium and determination of the composition and structure of the deposits. The data were evaluated with respect to the aggressive impurity contents and proportions and solubilities of the components. Corrosion damage of the thread holes will be governed by the amounts of aggressive impurities such as sulfates and chlorides and by the presence of inactive compounds such as aluminosilicates and silicates. Although not participating directly, such substances can affect the corrosion processes through their physico-chemical properties, e.g., by adsorbing aggressive reagents. (author)

Correlation between the sub-structure parameters and the manufacturing technologies of metal threads in historical textiles using X-ray line profile analysis

Energy Technology Data Exchange (ETDEWEB)

Csiszar, Gabor; Ungar, Tamas [Eoetvoes University Budapest, Department of Materials Physics, Budapest (Hungary); Jaro, Marta [Hungarian National Museum, Budapest (Hungary)

2013-06-15

Micro-structure can talk when documentation is missing. In ancient Roman or medieval periods, kings, queens, or just rich people decorated their clothes or even their horse covers richly with miniature jewels or metal threads. The origin or the fabrication techniques of these ancient threads is often unknown. Thirteen thread samples made of gold or gilt silver manufactured during the last sixteen hundred years are investigated for the micro-structure in terms of dislocation density, crystallite size, and planar defects. In a few cases, these features are compared with sub-structure of similar metallic threads prepared in modern, twentieth century workshops. The sub-structure is determined by X-ray line profile analysis, using high resolution diffractograms with negligible instrumental broadening. On the basis of the sub-structure parameters, we attempt to assess the metal-threads manufacturing procedures on samples stemming from the fourth century A.D. until now. (orig.)

Discriminating Intercalative Effects of Threading Intercalator Nogalamycin, from Classical Intercalator Daunomycin, Using Single Molecule Atomic Force Spectroscopy.

Directory of Open Access Journals (Sweden)

T Banerjee

Full Text Available DNA threading intercalators are a unique class of intercalating agents, albeit little biophysical information is available on their intercalative actions. Herein, the intercalative effects of nogalamycin, which is a naturally-occurring DNA threading intercalator, have been investigated by high-resolution atomic force microscopy (AFM and spectroscopy (AFS. The results have been compared with those of the well-known chemotherapeutic drug daunomycin, which is a non-threading classical intercalator bearing structural similarity to nogalamycin. A comparative AFM assessment revealed a greater increase in DNA contour length over the entire incubation period of 48 h for nogalamycin treatment, whereas the contour length increase manifested faster in case of daunomycin. The elastic response of single DNA molecules to an externally applied force was investigated by the single molecule AFS approach. Characteristic mechanical fingerprints in the overstretching behaviour clearly distinguished the nogalamycin/daunomycin-treated dsDNA from untreated dsDNA-the former appearing less elastic than the latter, and the nogalamycin-treated DNA distinguished from the daunomycin-treated DNA-the classically intercalated dsDNA appearing the least elastic. A single molecule AFS-based discrimination of threading intercalation from the classical type is being reported for the first time.

Discriminating Intercalative Effects of Threading Intercalator Nogalamycin, from Classical Intercalator Daunomycin, Using Single Molecule Atomic Force Spectroscopy.

Science.gov (United States)

Banerjee, T; Banerjee, S; Sett, S; Ghosh, S; Rakshit, T; Mukhopadhyay, R

2016-01-01

DNA threading intercalators are a unique class of intercalating agents, albeit little biophysical information is available on their intercalative actions. Herein, the intercalative effects of nogalamycin, which is a naturally-occurring DNA threading intercalator, have been investigated by high-resolution atomic force microscopy (AFM) and spectroscopy (AFS). The results have been compared with those of the well-known chemotherapeutic drug daunomycin, which is a non-threading classical intercalator bearing structural similarity to nogalamycin. A comparative AFM assessment revealed a greater increase in DNA contour length over the entire incubation period of 48 h for nogalamycin treatment, whereas the contour length increase manifested faster in case of daunomycin. The elastic response of single DNA molecules to an externally applied force was investigated by the single molecule AFS approach. Characteristic mechanical fingerprints in the overstretching behaviour clearly distinguished the nogalamycin/daunomycin-treated dsDNA from untreated dsDNA-the former appearing less elastic than the latter, and the nogalamycin-treated DNA distinguished from the daunomycin-treated DNA-the classically intercalated dsDNA appearing the least elastic. A single molecule AFS-based discrimination of threading intercalation from the classical type is being reported for the first time.

Verification of motion induced thread effect during tomotherapy using gel dosimetry

International Nuclear Information System (INIS)

Edvardsson, Anneli; Ljusberg, Anna; Ceberg, Crister; Medin, Joakim; Ambolt, Lee; Nordström, Fredrik; Ceberg, Sofie

2015-01-01

The purpose of the study was to evaluate how breathing motion during tomotherapy (Accuray, CA, USA) treatment affects the absorbed dose distribution. The experiments were carried out using gel dosimetry and a motion device simulating respiratory-like motion (HexaMotion, ScandiDos, Uppsala, Sweden). Normoxic polyacrylamide gels (nPAG) were irradiated, both during respiratory-like motion and in a static mode. To be able to investigate interplay effects the static absorbed dose distribution was convolved with the motion function and differences between the dynamic and convolved static absorbed dose distributions were interpreted as interplay effects. The expected dose blurring was present and the interplay effects formed a spiral pattern in the lower dose volume. This was expected since the motion induced affects the preset pitch and the theoretically predicted thread effect may emerge. In this study, the motion induced thread effect was experimentally verified for the first time

Threaded-Field-Line Model for the Transition Region and Solar Corona

Science.gov (United States)

Sokolov, I.; van der Holst, B.; Gombosi, T. I.

2014-12-01

In numerical simulations of the solar corona, both for the ambient state and especially for dynamical processes the most computational resources are spent for maintaining the numerical solution in the Low Solar Corona and in the transition region, where the temperature gradients are very sharp and the magnetic field has a complicated topology. The degraded computational efficiency is caused by the need in a highest resolution as well as the use of the fully three-dimensional implicit solver for electron heat conduction. On the other hand, the physical nature of the processes involved is rather simple (which still does not facilitate the numerical methods) as long as the heat fluxes as well as slow plasma motional velocities are aligned with the magnetic field. The Alfven wave turbulence, which is often believed to be the main driver of the solar wind and the main source of the coronal heating, is characterized by the Poynting flux of the waves, which is also aligned with the magnetic field. Therefore, the plasma state in any point of the three-dimensional grid in the Low Solar Corona can be found by solving a set of one-dimensional equations for the magnetic field line ("thread"), which passes through this point and connects it to the chromosphere and to the global Solar Corona. In the present paper we describe an innovative computational technology based upon the use of the magnetic-field-line-threads to forlmulate the boundary condition for the global solar corona model which traces the connection of each boundary point to the cromosphere along the threads.

Structural pathway of regulated substrate transfer and threading through an Hsp100 disaggregase.

Science.gov (United States)

Deville, Célia; Carroni, Marta; Franke, Kamila B; Topf, Maya; Bukau, Bernd; Mogk, Axel; Saibil, Helen R

2017-08-01

Refolding aggregated proteins is essential in combating cellular proteotoxic stress. Together with Hsp70, Hsp100 chaperones, including Escherichia coli ClpB, form a powerful disaggregation machine that threads aggregated polypeptides through the central pore of tandem adenosine triphosphatase (ATPase) rings. To visualize protein disaggregation, we determined cryo-electron microscopy structures of inactive and substrate-bound ClpB in the presence of adenosine 5'- O -(3-thiotriphosphate), revealing closed AAA+ rings with a pronounced seam. In the substrate-free state, a marked gradient of resolution, likely corresponding to mobility, spans across the AAA+ rings with a dynamic hotspot at the seam. On the seam side, the coiled-coil regulatory domains are locked in a horizontal, inactive orientation. On the opposite side, the regulatory domains are accessible for Hsp70 binding, substrate targeting, and activation. In the presence of the model substrate casein, the polypeptide threads through the entire pore channel and increased nucleotide occupancy correlates with higher ATPase activity. Substrate-induced domain displacements indicate a pathway of regulated substrate transfer from Hsp70 to the ClpB pore, inside which a spiral of loops contacts the substrate. The seam pore loops undergo marked displacements, along with ordering of the regulatory domains. These asymmetric movements suggest a mechanism for ATPase activation and substrate threading during disaggregation.

Late Migration of Threaded Wire (Schanz Screw from Right Distal Clavicle to the Cervical Spine

Directory of Open Access Journals (Sweden)

Chun-Hao Tsai

2009-01-01

Full Text Available We report a 49-year-old man who had undergone osteosynthesis to treat right distal clavicular fracture with a threaded wire (Schanz screw. The wire could not be removed due to its firm fixation within the bone. Eight years later, migration of the broken wire to the right 7th cervical vertebra punctured the lamina, with no spinal cord injury noted. The threaded wire was extracted from the C7 lamina emergently. No complication occurred after pin removal or during the 1-year postoperative follow-up.

What Examiners Do: What Thesis Students Should Know

Science.gov (United States)

Golding, Clinton; Sharmini, Sharon; Lazarovitch, Ayelet

2014-01-01

Although many articles have been written about thesis assessment, none provide a comprehensive, general picture of what examiners do as they assess a thesis. To synthesise this diverse literature, we reviewed 30 articles, triangulated their conclusions and identified 11 examiner practices. Thesis examiners tend to be broadly consistent in their…

Understanding Single-Thread Meandering Rivers with High Sinuosity on Mars through Chemical Precipitation Experiments

Science.gov (United States)

Lim, Y.; Kim, W.

2015-12-01

Meandering rivers are extremely ubiquitous on Earth, yet it is only recently that single-thread experimental channels with low sinuosity have been created. In these recent experiments, as well as in natural rivers, vegetation plays a crucial role in maintaining a meandering pattern by adding cohesion to the bank and inhibiting erosion. The ancient, highly sinuous channels found on Mars are enigmatic because presumably vegetation did not exist on ancient Mars. Under the hypothesis that Martian meandering rivers formed by chemical precipitation on levees and flood plain deposits, we conducted carbonate flume experiments to investigate the formation and evolution of a single-thread meander pattern without vegetation. The flow recirculating in the flume is designed to accelerate chemical reactions - dissolution of limestone using CO2 gas to produce artificial spring water and precipitation of carbonates to increase cohesion- with precise control of water discharge, sediment discharge, and temperature. Preliminary experiments successfully created a single-thread meandering pattern through chemical processes. Carbonate deposits focused along the channel sides improved the bank stability and made them resistant to erosion, which led to a stream confined in a narrow path. The experimental channels showed lateral migration of the bend through cut bank and point bar deposits; intermittent floods created overbank flow and encouraged cut bank erosion, which enhanced lateral migration of the channel, while increase in sediment supply improved lateral point bar deposition, which balanced erosion and deposition rates. This mechanism may be applied to terrestrial single-thread and/or meandering rivers with little to no vegetation or before its introduction to Earth and also provide the link between meandering river records on Mars to changes in Martian surface conditions.

Deviation of the typical AAA substrate-threading pore prevents fatal protein degradation in yeast Cdc48.

Science.gov (United States)

Esaki, Masatoshi; Islam, Md Tanvir; Tani, Naoki; Ogura, Teru

2017-07-14

Yeast Cdc48 is a well-conserved, essential chaperone of ATPases associated with diverse cellular activity (AAA) proteins, which recognizes substrate proteins and modulates their conformations to carry out many cellular processes. However, the fundamental mechanisms underlying the diverse pivotal roles of Cdc48 remain unknown. Almost all AAA proteins form a ring-shaped structure with a conserved aromatic amino acid residue that is essential for proper function. The threading mechanism hypothesis suggests that this residue guides the intrusion of substrate proteins into a narrow pore of the AAA ring, thereby becoming unfolded. By contrast, the aromatic residue in one of the two AAA rings of Cdc48 has been eliminated through evolution. Here, we show that artificial retrieval of this aromatic residue in Cdc48 is lethal, and essential features to support the threading mechanism are required to exhibit the lethal phenotype. In particular, genetic and biochemical analyses of the Cdc48 lethal mutant strongly suggested that when in complex with the 20S proteasome, essential proteins are abnormally forced to thread through the Cdc48 pore to become degraded, which was not detected in wild-type Cdc48. Thus, the widely applicable threading model is less effective for wild-type Cdc48; rather, Cdc48 might function predominantly through an as-yet-undetermined mechanism.

Using VoiceThread to Promote Collaborative Learning in On-Line Clinical Nurse Leader Courses.

Science.gov (United States)

Fox, Ola H

The movement to advance the clinical nurse leader (CNL) as an innovative new role for meeting higher health care quality standards continues with CNL programs offered on-line at colleges and universities nationwide. Collaborative learning activities offer the opportunity for CNL students to gain experience in working together in small groups to negotiate and solve care process problems. The challenge for nurse educators is to provide collaborative learning activities in an asynchronous learning environment that can be considered isolating by default. This article reports on the experiences of 17 CNL students who used VoiceThread, a cloud-based tool that allowed them to communicate asynchronously with one another through voice comments for collaboration and sharing knowledge. Participants identified benefits and drawbacks to using VoiceThread for collaboration as compared to text-based discussion boards. Students reported that the ability to hear the voice of their peers and the instructor helped them feel like they were in a classroom communicating with "real" instructor and peers. Students indicated a preference for on-line classes that used VoiceThread discussions to on-line classes that used only text-based discussion boards. Copyright © 2016 Elsevier Inc. All rights reserved.

A General Case to Determine Dimensions and Their Tolerance Zones for the Thread Parts of Epicyclic Roller-Screw Mechanisms

Directory of Open Access Journals (Sweden)

D. S. Blinov

2017-01-01

Full Text Available The most important trend in the development of aerospace industry is to increase load capacity of mechanisms, assemblies, and parts without increasing their size and weight. The above is also true for widely used in aircrafts and the most promising up to date Epicyclic Roller-Screw Mechanisms (ERSM that convert rotational movement into translational one. Previously (in the article, it was proposed to increase the load capacity (approximately by 15% through reduction of included angle of ERSM threaded parts from 90° to 70°.However, such improvement of ERSM will change dimensions of the mechanism parts and its parameters and characteristics (efficiency factor, position of initial point of contact of the conjugated thread turns and parameters of their contact interaction, as well as kinematic parameters, which will require additional studies. If we take into account the priority of these studies, then surely we must begin with development of technique to determine dimensions of the ERSM main parts and their tolerance zones because we need drawings to manufacture and test the upgraded ERSM. We have developed a technique to calculate dimensions of the main parts of ERSM and associated tolerance zones that takes in to account the change of included angle of threaded parts of the mechanism and radius of circular arc according to which roller thread profile has been fulfilled. So the proposed technique is the general one in comparison with the previous ones.This technique uses various conditions and equations to determine dimensions of parts and associated tolerance zones. For example, a nut encircles a screw with rollers, and their dimensions form a closed dimension chain, in which the dimensions and associated tolerances must be such as to ensure ERSM assembling, on the one hand, and, on the other hand the backlash of the mechanism should be minimal to ensure high load capacity, kinematic accuracy, and rigidity of ERSM. We used the following

Metal and transuranic records in mussel shells, byssal threads and tissues

Science.gov (United States)

Koide, Minoru; Lee, Dong Soo; Goldberg, Edward D.

1982-12-01

Bivalve shells offer several advantages over tissues for the monitoring of heavy metal pollutants in the marine environment. They are easier to handle and to store. The problem of whether to depurate the animals before analyses is avoided. The shells appear to be more sensitive to environmental heavy metals levels over the long term than do the soft parts. Of the substances examined (Cd, Cu, Zn, Pb, Ag, Ni, 238Pu and 239 + 240Pu) only Pb and Pu displayed a strong covariance between soft tissue and shell concentrations. There were strong correlations between metals in the shell but not in the soft tissues in general. The byssal threads, because of their enrichment of transuranic elements and of their ease in handling, may be useful in monitoring these metals. A very weak discharge of 238Pu to marine waters adjacent to a nuclear reactor was detected in the byssal threads of mussels.

Challenges for Better thesis supervision.

Science.gov (United States)

Ghadirian, Laleh; Sayarifard, Azadeh; Majdzadeh, Reza; Rajabi, Fatemeh; Yunesian, Masoud

2014-01-01

Conduction of thesis by the students is one of their major academic activities. Thesis quality and acquired experiences are highly dependent on the supervision. Our study is aimed at identifing the challenges in thesis supervision from both students and faculty members point of view. This study was conducted using individual in-depth interviews and Focus Group Discussions (FGD). The participants were 43 students and faculty members selected by purposive sampling. It was carried out in Tehran University of Medical Sciences in 2012. Data analysis was done concurrently with data gathering using content analysis method. Our data analysis resulted in 162 codes, 17 subcategories and 4 major categories, "supervisory knowledge and skills", "atmosphere", "bylaws and regulations relating to supervision" and "monitoring and evaluation". This study showed that more attention and planning in needed for modifying related rules and regulations, qualitative and quantitative improvement in mentorship training, research atmosphere improvement and effective monitoring and evaluation in supervisory area.

BIOMECHANICAL JUSTIFICATION OF THE THREADED ELEMENT’S FORM OF THE TOTAL HIP ENDOPROSTHESIS’ ACETABULAR COMPONENT

Directory of Open Access Journals (Sweden)

PANCHENKO S. P.

2017-03-01

Full Text Available Abstract. Formulation of the problem. Total hip replacement (THR remains to be responsible for the markable clinical achievements of contemporal orthopaedic surgery [1; 2; 4]. It should be noted, that numerous efforts to create an “ideal” uncemented hip endoprosthesis’ construction were failed, but led into wide diversity of implants. Such a diversity allowes to individualize implant type selection and to improve implant’s survival and total THR’s clinical outcomes [1; 4]. Outcomes mentioned above determine successful application of total hip replacement as a treatment method. Consequently, development of new and improvement of existing hip endoprosthesis’ constructions seems to be of current interest for contemporal orthopaedic surgery. Purpose. To determine optimal parametres of threaded element’s geometry of total hip endoprosthesis’ threaded acetabular component. Conclusion. There were revealed that threaded element model with right-angled triangle transverse section shape seems to be the most effective considering hardness, while the triangle is leaned on the bone massive with its cathetus. At the same time, results of calculations represent pelvic bone stress-strain state during THR quantitavely and stipulate further research.

Modeling of prominence threads in magnetic fields: Levitation by incompressible MHD waves

Science.gov (United States)

Pécseli, Hans; Engvold, OddbjØrn

2000-05-01

The nature of thin, highly inclined threads observed in quiescent prominences has puzzled solar physicists for a long time. When assuming that the threads represent truly inclined magnetic fields, the supporting mechanism of prominence plasma against gravity has remained an open issue. This paper examines the levitation of prominence plasma exerted by weakly damped MHD waves in nearly vertical magnetic flux tubes. It is shown that the wave damping, and resulting `radiation pressure', caused predominantly by ion-neutral collisions in the `cold' prominence plasma, may balance the acceleration of gravity provided the oscillation frequency is ω~ 2 rad s^-1 (f~0.5 Hz). Such short wave periods may be the result of small-scale magnetic reconnections in the highly fragmentary magnetic field of quiescent prominences. In the proposed model, the wave induced levitation acts predominantly on plasma - neutral gas mixtures.

Control of threading dislocations by strain engineering in GaInP buffers grown on GaAs substrates

Energy Technology Data Exchange (ETDEWEB)

Li, K.L., E-mail: klli2010@sinano.ac.cn [Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215123 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Sun, Y.R. [Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215123 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Dong, J.R. [Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215123 (China); He, Y.; Zeng, X.L. [Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215123 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhao, Y.M.; Yu, S.Z.; Zhao, C.Y. [Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215123 (China)

2015-10-30

High quality strain-relaxed In0.3Ga0.7As layers with threading dislocation density about 2 × 10{sup 6} cm{sup −2} and root-mean-square surface roughness below 8.0 nm were obtained on GaAs substrates using compositionally undulating step-graded Ga{sub 1−x}In{sub x}P (x = 0.48–0.78) buffers. The transmission electron microscopy results reveal that the conventional step-graded GaInP buffers produce high density dislocation pile-ups, which are induced by the blocking effect of the nonuniform misfit dislocation strain field and crosshatched surface on the gliding of threading dislocations. In contrast, due to strain compensation, insertion of the tensile GaInP layers decreases the surface roughness and promotes dislocation annihilation in the interfaces, and eventually reduces the threading dislocation density. This provides a promising way to achieve a virtual substrate with the desired lattice parameter for metamorphic device applications. - Highlights: • Metamorphic GaInP buffers were grown by metal–organic chemical vapor deposition. • The compositionally undulating buffers effectively reduce the threading dislocation density. • High quality strain-relaxed In{sub 0.3}Ga{sub 0.7}As layers were obtained.

Reading in Preparation for Writing a PhD Thesis: Case Studies of Experiences

Science.gov (United States)

Kwan, Becky S. C.

2009-01-01

The paper presents stories of how a group of doctoral students chose the key disciplinary literature that they read in preparation for their thesis-undertaking (RT). The stories were analyzed in light of current understanding of literature reviewing as a situated practice and theory of doctoral education as socio-cognitive apprenticeship. As the…

FODEM: A Multi-Threaded Research and Development Method for Educational Technology

Science.gov (United States)

Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

2012-01-01

Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

Low threading dislocation density aluminum nitride on silicon carbide through the use of reduced temperature interlayers

KAUST Repository

Foronda, Humberto M.

2017-11-23

In this work, reduced threading dislocation density AlN on (0 0 0 1) 6H-SiC was realized through the use of reduced temperature AlN interlayers in the metalorganic chemical vapor deposition growth. We explored the dependence of the interlayer growth temperature on the AlN crystal quality, defect density, and surface morphology. The crystal quality was characterized using omega rocking curve scans and the threading dislocation density was determined by plan view transmission electron microscopy. The growth resulted in a threading dislocation density of 7 × 108 cm−2 indicating a significant reduction in the defect density of AlN in comparison to direct growth of AlN on SiC (∼1010 cm−2). Atomic force microscopy images demonstrated a clear step-terrace morphology that is consistent with step flow growth at high temperature. Reducing the interlayer growth temperature increased the TD inclination and thus enhanced TD-TD interactions. The TDD was decreased via fusion and annihilation reactions.

Advice for Writing a Thesis (Based on What Examiners Do)

Science.gov (United States)

Golding, Clinton

2017-01-01

In the article, "What examiners do: What thesis students should know", we identified 11 things that thesis examiners do as they read and judge a thesis. But, we left a gap in the research: knowing this, What should thesis students do to write for their examiners? In this article, I fill the gap. The advice for thesis students is: first,…

Microfiltration of red berry juice with thread filters: Effects of temperature, flow and filter pore size

DEFF Research Database (Denmark)

Bagger-Jørgensen, Rico; Casani, Sandra Dobon; Meyer, Anne Boye Strunge

2002-01-01

) on the transmembrane pressure, juice turbidity, protein, sugar, and total phenols levels was evaluated in a lab scale microfiltration unit employing statistically designed factorial experiments. Thread microfiltration reduced significantly the turbidity of both juices. For blackcurrant juice, in all experiments......, the turbidity was immediately reduced to the level required for finished juice without compromising either the protein, the sugar or the phenols content. High flow rates increased the turbidity in blackcurrant juice, but did not affect cherry juice quality. Filtomat(R) thread microfiltration therefore appears...

Absence of localization in a disordered one-dimensional ring threaded by an Aharonov-Bohm flux

International Nuclear Information System (INIS)

Heinrichs, Jean

2009-01-01

Absence of localization is demonstrated analytically to leading order in weak disorder in a one-dimensional Anderson model of a ring threaded by an Aharonov-Bohm (AB) flux. The result follows from adapting an earlier perturbation treatment of disorder in a superconducting ring subjected to an imaginary vector potential proportional to a depinning field for flux lines bound to random columnar defects parallel to the axis of the ring. The absence of localization in the ring threaded by an AB flux for sufficiently weak disorder is compatible with large free-electron-type persistent current obtained in recent studies of the above model.

Practical Formal Verification of MPI and Thread Programs

Science.gov (United States)

Gopalakrishnan, Ganesh; Kirby, Robert M.

Large-scale simulation codes in science and engineering are written using the Message Passing Interface (MPI). Shared memory threads are widely used directly, or to implement higher level programming abstractions. Traditional debugging methods for MPI or thread programs are incapable of providing useful formal guarantees about coverage. They get bogged down in the sheer number of interleavings (schedules), often missing shallow bugs. In this tutorial we will introduce two practical formal verification tools: ISP (for MPI C programs) and Inspect (for Pthread C programs). Unlike other formal verification tools, ISP and Inspect run directly on user source codes (much like a debugger). They pursue only the relevant set of process interleavings, using our own customized Dynamic Partial Order Reduction algorithms. For a given test harness, DPOR allows these tools to guarantee the absence of deadlocks, instrumented MPI object leaks and communication races (using ISP), and shared memory races (using Inspect). ISP and Inspect have been used to verify large pieces of code: in excess of 10,000 lines of MPI/C for ISP in under 5 seconds, and about 5,000 lines of Pthread/C code in a few hours (and much faster with the use of a cluster or by exploiting special cases such as symmetry) for Inspect. We will also demonstrate the Microsoft Visual Studio and Eclipse Parallel Tools Platform integrations of ISP (these will be available on the LiveCD).

Restorasi Resin Komposit Menggunakan Pasak Tapered Self Threading Pada Molar Ketiga Kiri Mandibula

Directory of Open Access Journals (Sweden)

Ellen Krisanti

2013-06-01

Composite Resin Restoration Using Tapered Self Threading Poston Left Mandibular Third Molar. Root canal morphology of mandibular third molar has more complex variation than the other molars. In third molar, the extraction teeth are often executed; however, the third molar can be maintained in other conditions. One visit root canal treatment is a therapy option for this case. The purpose of this case report is to show the success of one visit root canal treatment in third molar with pulp necrosis by restoring the composite resin through tapered self-treading post. A 20 year-old female patient who came to the Prof Soedomo RSGM, FKG UGM complained about the pain when chewing food on her third molar and positive in percussion. The radiographs showed that there was an incomplete restoration. There was a gap between cavities with restoration. The treatment plan for this case was one visit root canal treatment and composite resin with tapered self-threading post as final restoration. From the case, it can concluded that one visit root canal treatment results in a smaller chance for microorganism recontamination than the multi-visit in order to ensure the success of the treatment. Direct composite resin restoration with tapered self-threading dowel is an alternative restoration after endodontic treatment because it works out faster and more retentive.

Energy-aware Thread and Data Management in Heterogeneous Multi-core, Multi-memory Systems

Energy Technology Data Exchange (ETDEWEB)

Su, Chun-Yi [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

2014-12-16

By 2004, microprocessor design focused on multicore scaling—increasing the number of cores per die in each generation—as the primary strategy for improving performance. These multicore processors typically equip multiple memory subsystems to improve data throughput. In addition, these systems employ heterogeneous processors such as GPUs and heterogeneous memories like non-volatile memory to improve performance, capacity, and energy efficiency. With the increasing volume of hardware resources and system complexity caused by heterogeneity, future systems will require intelligent ways to manage hardware resources. Early research to improve performance and energy efficiency on heterogeneous, multi-core, multi-memory systems focused on tuning a single primitive or at best a few primitives in the systems. The key limitation of past efforts is their lack of a holistic approach to resource management that balances the tradeoff between performance and energy consumption. In addition, the shift from simple, homogeneous systems to these heterogeneous, multicore, multi-memory systems requires in-depth understanding of efficient resource management for scalable execution, including new models that capture the interchange between performance and energy, smarter resource management strategies, and novel low-level performance/energy tuning primitives and runtime systems. Tuning an application to control available resources efficiently has become a daunting challenge; managing resources in automation is still a dark art since the tradeoffs among programming, energy, and performance remain insufficiently understood. In this dissertation, I have developed theories, models, and resource management techniques to enable energy-efficient execution of parallel applications through thread and data management in these heterogeneous multi-core, multi-memory systems. I study the effect of dynamic concurrent throttling on the performance and energy of multi-core, non-uniform memory access

Vaginal thread formation in the healthy offspring of untreated Long-Evans rats

Science.gov (United States)

Vaginal threads are characterized as cords of mesenchymal tissue that cross the vaginal opening. They are sometimes apparent in rats after weaning, and typically disappear within 1-2 days as the female reaches puberty. If persistent, they can increase uncertainty in assessing rep...

Scheduler-specific Confidentiality for Multi-Threaded Programs and Its Logic-Based Verification

NARCIS (Netherlands)

Huisman, Marieke; Ngo, Minh Tri

2011-01-01

Observational determinism has been proposed in the literature as a way to ensure confidentiality for multi-threaded programs. Intuitively, a program is observationally deterministic if the behavior of the public variables is deterministic, i.e., independent of the private variables and the

Scheduler-Specific Confidentiality for Multi-Threaded Programs and Its Logic-Based Verification

NARCIS (Netherlands)

Huisman, Marieke; Ngo, Minh Tri; Beckert, B.; Damiani, F.; Gurov, D.

2012-01-01

Observational determinism has been proposed in the literature as a way to ensure condentiality for multi-threaded programs. Intuitively, a program is observationally deterministic if the behavior of the public variables is deterministic, i.e., independent of the private variables and the scheduling

The Master's Thesis in Applied Psychology Training.

Science.gov (United States)

Shultz, Kenneth S.; Kottke, Janet L.

1996-01-01

Recommends the inclusion of a master's thesis in industrial and organizational psychology programs. Argues that the thesis serves several critical educational purposes and is relevant to applied psychology. Offers suggestions for increasing the relationship between the educational requirement and the professional tasks. (MJP)

Effect of thread embedding acupuncture for facial wrinkles and laxity: a single-arm, prospective, open-label study

Directory of Open Access Journals (Sweden)

Younghee Yun

2017-12-01

Full Text Available Background: There is a growing trend for patients to seek the least invasive treatments with less risk of complications and downtime for facial rejuvenation. Thread embedding acupuncture has become popular as a minimally invasive treatment. However, there is little clinical evidence in the literature regarding its effects. Methods: This single-arm, prospective, open-label study recruited participants who were women aged 40–59 years, with Glogau photoaging scale III–IV. Fourteen participants received thread embedding acupuncture one time and were measured before and after 1 week from the procedure. The primary outcome was a jowl to subnasale vertical distance. The secondary outcomes were facial wrinkle distances, global esthetic improvement scale, Alexiades–Armenakas laxity scale, and patient-oriented self-assessment scale. Results: Fourteen participants underwent thread embedding acupuncture alone, and 12 participants revisited for follow-up outcome measures. For the primary outcome measure, both jowls were elevated in vertical height by 1.87 mm (left and 1.43 mm (right. Distances of both melolabial and nasolabial folds showed significant improvement. In the Alexiades–Armenakas laxity scale, each evaluator evaluated for four and nine participants by 0.5 grades improved. In the global aesthetic improvement scale, improvement was graded as 1 and 2 in nine and five cases, respectively. The most common adverse events were mild bruising, swelling, and pain. However, adverse events occurred, although mostly minor and of short duration. Conclusion: In this study, thread embedding acupuncture showed clinical potential for facial wrinkles and laxity. However, further large-scale trials with a controlled design and objective measurements are needed. Keywords: polydioxanone, rejuvenation, rhytidoplasty, skin aging, thread embedding acupuncture

Molecular threading and tunable molecular recognition on DNA origami nanostructures.

Science.gov (United States)

Wu, Na; Czajkowsky, Daniel M; Zhang, Jinjin; Qu, Jianxun; Ye, Ming; Zeng, Dongdong; Zhou, Xingfei; Hu, Jun; Shao, Zhifeng; Li, Bin; Fan, Chunhai

2013-08-21

The DNA origami technology holds great promise for the assembly of nanoscopic technological devices and studies of biochemical reactions at the single-molecule level. For these, it is essential to establish well controlled attachment of functional materials to predefined sites on the DNA origami nanostructures for reliable measurements and versatile applications. However, the two-sided nature of the origami scaffold has shown limitations in this regard. We hypothesized that holes of the commonly used two-dimensional DNA origami designs are large enough for the passage of single-stranded (ss)-DNA. Sufficiently long ssDNA initially located on one side of the origami should thus be able to "thread" to the other side through the holes in the origami sheet. By using an origami sheet attached with patterned biotinylated ssDNA spacers and monitoring streptavidin binding with atomic force microscopic (AFM) imaging, we provide unambiguous evidence that the biotin ligands positioned on one side have indeed threaded through to the other side. Our finding reveals a previously overlooked critical design feature that should provide new interpretations to previous experiments and new opportunities for the construction of origami structures with new functional capabilities.

Award for the best CMS thesis

CERN Multimedia

2003-01-01

The 2002 CMS PhD Thesis Award for has been presented to Giacomo Luca Bruno for his thesis defended at the University of Pavia in Italy and entitled "The RPC detectors and the muon system for the CMS experiment at the LHC". His work was supervised by Sergio P. Ratti from the University of Pavia. Since April 2002, Giacomo has been employed as a research fellow by CERN's EP Division. He continues to work on CMS in the areas of data acquisition and physics reconstruction and selection. Last Monday he received a commemorative engraved plaque from Lorenzo Foà, chairman of the CMS Collaboration Board. He will also receive expenses paid to an international physics conference to present his thesis results. Giacomo Luca Bruno with Lorenzo Foà

A thesis on the Development of an Automated SWIFT Edge Detection Algorithm

Energy Technology Data Exchange (ETDEWEB)

Trujillo, Christopher J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-28

Throughout the world, scientists and engineers such as those at Los Alamos National Laboratory, perform research and testing unique only to applications aimed towards advancing technology, and understanding the nature of materials. With this testing, comes a need for advanced methods of data acquisition and most importantly, a means of analyzing and extracting the necessary information from such acquired data. In this thesis, I aim to produce an automated method implementing advanced image processing techniques and tools to analyze SWIFT image datasets for Detonator Technology at Los Alamos National Laboratory. Such an effective method for edge detection and point extraction can prove to be advantageous in analyzing such unique datasets and provide for consistency in producing results.

Sediment Core Extrusion Method at Millimeter Resolution Using a Calibrated, Threaded-rod.

Science.gov (United States)

Schwing, Patrick T; Romero, Isabel C; Larson, Rebekka A; O'Malley, Bryan J; Fridrik, Erika E; Goddard, Ethan A; Brooks, Gregg R; Hastings, David W; Rosenheim, Brad E; Hollander, David J; Grant, Guy; Mulhollan, Jim

2016-08-17

Aquatic sediment core subsampling is commonly performed at cm or half-cm resolution. Depending on the sedimentation rate and depositional environment, this resolution provides records at the annual to decadal scale, at best. An extrusion method, using a calibrated, threaded-rod is presented here, which allows for millimeter-scale subsampling of aquatic sediment cores of varying diameters. Millimeter scale subsampling allows for sub-annual to monthly analysis of the sedimentary record, an order of magnitude higher than typical sampling schemes. The extruder consists of a 2 m aluminum frame and base, two core tube clamps, a threaded-rod, and a 1 m piston. The sediment core is placed above the piston and clamped to the frame. An acrylic sampling collar is affixed to the upper 5 cm of the core tube and provides a platform from which to extract sub-samples. The piston is rotated around the threaded-rod at calibrated intervals and gently pushes the sediment out the top of the core tube. The sediment is then isolated into the sampling collar and placed into an appropriate sampling vessel (e.g., jar or bag). This method also preserves the unconsolidated samples (i.e., high pore water content) at the surface, providing a consistent sampling volume. This mm scale extrusion method was applied to cores collected in the northern Gulf of Mexico following the Deepwater Horizon submarine oil release. Evidence suggests that it is necessary to sample at the mm scale to fully characterize events that occur on the monthly time-scale for continental slope sediments.

Racial Profiling and Moral Panic: Operation Thread and the Al-Qaeda Sleeper Cell that Never Was

Directory of Open Access Journals (Sweden)

Felix Odartey-Wellington

2009-01-01

Full Text Available In August 2003, Canadian and international media broke news of Operation Thread, executed by the Canadian state security apparatus to apprehend 23 South-Asian Muslim members of a “possible Al-Qaeda sleeper cell” in the Greater Toronto Area. After exposing the suspects to domestic and international opprobrium, the state security apparatus conceded that the allegations of terrorism were unfounded. Using material from the National Post and The Globe and Mail, this paper interrogates the mass mediation of Operation Thread as a case of racial profiling situated in a moral panic over “Islamic terrorism” that was created by a section of the Canadian news media and the state security apparatus. Particularly, it shows that the media contested the discourse of the state security apparatus, thus reflecting the contested nature of news as a social power resource. However, there is still a need for the media to be more critical when dealing with cases such as Operation Thread that are informed by racial profiling post September 11.

Multi-threaded ATLAS simulation on Intel Knights Landing processors

Science.gov (United States)

Farrell, Steven; Calafiura, Paolo; Leggett, Charles; Tsulaia, Vakhtang; Dotti, Andrea; ATLAS Collaboration

2017-10-01

The Knights Landing (KNL) release of the Intel Many Integrated Core (MIC) Xeon Phi line of processors is a potential game changer for HEP computing. With 72 cores and deep vector registers, the KNL cards promise significant performance benefits for highly-parallel, compute-heavy applications. Cori, the newest supercomputer at the National Energy Research Scientific Computing Center (NERSC), was delivered to its users in two phases with the first phase online at the end of 2015 and the second phase now online at the end of 2016. Cori Phase 2 is based on the KNL architecture and contains over 9000 compute nodes with 96GB DDR4 memory. ATLAS simulation with the multithreaded Athena Framework (AthenaMT) is a good potential use-case for the KNL architecture and supercomputers like Cori. ATLAS simulation jobs have a high ratio of CPU computation to disk I/O and have been shown to scale well in multi-threading and across many nodes. In this paper we will give an overview of the ATLAS simulation application with details on its multi-threaded design. Then, we will present a performance analysis of the application on KNL devices and compare it to a traditional x86 platform to demonstrate the capabilities of the architecture and evaluate the benefits of utilizing KNL platforms like Cori for ATLAS production.

A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread

Directory of Open Access Journals (Sweden)

Zhixu Dong

2018-04-01

Full Text Available The inconvenient loading and unloading of a long and heavy drill pipe gives rise to the difficulty in measuring the contour parameters of its threads at both ends. To solve this problem, in this paper we take the SCK230 drill pipe thread-repairing machine tool as a carrier to design and achieve a fast and on-machine measuring system based on a laser probe. This system drives a laser displacement sensor to acquire the contour data of a certain axial section of the thread by using the servo function of a CNC machine tool. To correct the sensor’s measurement errors caused by the measuring point inclination angle, an inclination error model is built to compensate data in real time. To better suppress random error interference and ensure real contour information, a new wavelet threshold function is proposed to process data through the wavelet threshold denoising. Discrete data after denoising is segmented according to the geometrical characteristics of the drill pipe thread, and the regression model of the contour data in each section is fitted by using the method of weighted total least squares (WTLS. Then, the thread parameters are calculated in real time to judge the processing quality. Inclination error experiments show that the proposed compensation model is accurate and effective, and it can improve the data acquisition accuracy of a sensor. Simulation results indicate that the improved threshold function is of better continuity and self-adaptability, which makes sure that denoising effects are guaranteed, and, meanwhile, the complete elimination of real data distorted in random errors is avoided. Additionally, NC50 thread-testing experiments show that the proposed on-machine measuring system can complete the measurement of a 25 mm thread in 7.8 s, with a measurement accuracy of ±8 μm and repeatability limit ≤ 4 μm (high repeatability, and hence the accuracy and efficiency of measurement are both improved.

Processing communications events in parallel active messaging interface by awakening thread from wait state

Science.gov (United States)

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2013-10-22

Processing data communications events in a parallel active messaging interface (`PAMI`) of a parallel computer that includes compute nodes that execute a parallel application, with the PAMI including data communications endpoints, and the endpoints are coupled for data communications through the PAMI and through other data communications resources, including determining by an advance function that there are no actionable data communications events pending for its context, placing by the advance function its thread of execution into a wait state, waiting for a subsequent data communications event for the context; responsive to occurrence of a subsequent data communications event for the context, awakening by the thread from the wait state; and processing by the advance function the subsequent data communications event now pending for the context.

Supervisors' perspective on medical thesis projects and dropout rates: survey among thesis supervisors at a large German university hospital.

Science.gov (United States)

Can, Elif; Richter, Felicitas; Valchanova, Ralitsa; Dewey, Marc

2016-10-14

To identify underlying causes for failure of medical thesis projects and the constantly high drop-out rate in Germany from the supervisors' perspective and to compare the results with the students' perspective. Cross-sectional survey. Online questionnaire for survey of medical thesis supervisors among the staff of Charité-Universitätsmedizin Berlin, Germany. Published, earlier longitudinal survey among students for comparison. 1069 thesis supervisors participated. Data are presented using descriptive statistics, and the χ 2 test served to compare the results among supervisors with the earlier data from the longitudinal survey of doctoral students. Not applicable. This survey is an observational study. Of 3653 potential participants, 1069 (29.3%) supervising 3744 doctoral candidates participated in the study. Supervisors considered themselves to be highly motivated and to offer adequate supervision. On the other hand, 87% stated that they did not feel well prepared for thesis supervision. Supervisors gave lack of timeliness of doctoral students and personal differences (p=0.024 and p=0.001) as the main reasons for terminating thesis projects. Doctoral students predominantly mentioned methodological problems and difficult subjects as critical issues (p=0.001 and pthesis supervisors and medical students feel ill prepared for their roles in the process of a medical dissertation. Contradictory reasons for terminating medical thesis projects based on supervisors' and students' self-assessment suggest a lack of communication and true scientific collaboration between supervisors and doctoral students as the major underlying issue that requires resolution. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Characteristics of threading dislocations in ZnO grown on facet-controlled epitaxial overgrown GaN templates

International Nuclear Information System (INIS)

Zhou, H L; Chua, S J; Chow, S Y; Pan, H; Zhu, Y W; Feng, Y P; Wang, L S; Zang, K Y; Liu, W; Tripathy, S

2007-01-01

Using transmission electron microscopy (TEM), the authors have investigated the behavior of threading dislocations in ZnO selectively grown on a facet-controlled epitaxial overgrown GaN template. In this case, the ZnO is grown by a vapor transport method. The TEM study in the overgrown regions shows that all the pure-edge type dislocations in ZnO are parallel toward the mask area and vertical propagation of dislocation to the ZnO surface is minimized. Using such a selective growth technique on a faceted semi-polar GaN surface, a reduction of threading dislocation density in ZnO could be achieved

Graduate Students’ Satisfaction on the Thesis Advising Practices

Directory of Open Access Journals (Sweden)

Susan S. Janer

2017-02-01

Full Text Available This descriptive action research focused on the satisfaction of the students on the advising practices of their thesis advisers. The 28 respondents of the study were purposively and incidentally chosen. The findings, derived from the use of unstructured interview and survey questionnaire, revealed that most of the students are satisfied with their thesis advisers in terms of their knowledge of student’s research, professional characteristics and qualities, and personality factors as revealed by the overall weighted mean values of 2.68, 2.72, and 2.72 respectively. The students along thesis advising observed various practices of the faculty members. Students chose their advisers based on their availability, field of specialization, and coaching and mentoring abilities. Based on the findings, this study recommends that the faculty members be given more training to further enhance their abilities in thesis advising. The college may also tap other research-reputable faculty members to become research advisers. An orientation activity among the students may also be conducted to assist them in choosing the faculty member with an appropriate research reputation and also to brief them on the roles they will play as thesis advisers. The need to revisit the policies of the School of Graduate Studies (SGS is also highly recommended. Hence, this study proposes some amendments on the existing guidelines of the department along thesis advising.

Progress report on reversal and substitute element technique for thread calibration on CMMs

DEFF Research Database (Denmark)

Carmignato, Simone; Larsen, Erik; Sobiecki, Rene

. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB...

Evolution of management accounting research: a review of thematic options in thesis in Brazil

Directory of Open Access Journals (Sweden)

Roberto Rivelino Martins Ribeiro

2013-05-01

Full Text Available This research was conducted with the aim of analyzing the thematic options in thesis in Post-graduate studies in Accounting in Brazil, from 1973 to 2010. It started from the identification of the Brazilian scientific production in management accounting focus of the study, then detect the management practices contemplated that categorized according to the evolutionary stages of IMAP. With regard to the characteristics of the scientific framework adopted, is that this research is descriptive in character, whose problem is analyzed in its qualitative and quantitative aspects, in which strategies were bibliographic, documentary and ex-post facto and primary data using a longitudinal perspective. With use of content analysis and descriptive statistics explored were 256 thesis which was accessed from the programs. In conducting the analysis, there is the prevailing practice and directed to the following conclusions: stage 1, is the predominant absorption costing and variable costing; Stage 2 stands out the budget, stage 3, ABC and strategic planning; and stage 4, EVA, BSC and GECON.

Through Steams & Porno Videos: Homo/Erotic Dissident Threads in the Discoursive Tapestry of Aging Men

Directory of Open Access Journals (Sweden)

Fernando Altair Pocahy

2012-05-01

Full Text Available This article analyzes forms of regulation of gender and sexuality in their relationshipwith the normative discourses triggered by the discursive production of the ‘aging’. Seeking thegames of truth that surround the experience of elderly men with homo erotic practices, this study(the result of a doctoral thesis in Education tried to understand how the modern discursivepractices can build and materialize the aging body as “abject”.

Nano-enabled sensors, electronics and energy source on polymer, paper and thread substrates

Science.gov (United States)

Mostafalu, Pooria

Over the past decades, design and development of portable devices for monitoring of biomarkers especially for at risk patients is receiving considerable attention. These devices are either single use diagnostic platforms, wearable on body or on fabric, or they are implanted close to the tissue and organ that it monitors and cures. Sensors, energy sources, and data acquisition devices are the main components of a such monitoring platform. Sensors collect the information using bio-recognition tools such as enzymes and antibodies. Then, the transducers (electrodes, fluorophore, etc) convert it to the appropriate format, for instance electrical and optical signals. After that, data acquisition system amplifies and digitizes the signal and transfers the data to the recording instruments for further processing. Moreover, energy sources are necessary for powering the sensors and electronics. In wearable and implantable applications, these devices need to be flexible, light weight and biocompatible, and their performance should be similar to their rigid counterparts. In this dissertation we address these requirement for wearable and implantable devices. We showed integrated sensors, electronics, and energy sources on flexible polymers, paper, and thread. These devices provide many advantages for monitoring of the physiological condition of a patient and treatment accordingly. Real-time capability of the platform was enabled using wireless telemetry. One of the major innovations of this dissertation is the use of thread as a substrate for making medical diagnostic devices. While conventional substrates (glass, silicon, polyimide, PDMS etc) hold great promise for making wearable and implantable devices, their overall structure and form has remained essentially two dimensional, limiting their function to tissue surfaces such as skin. However, the ability to integrate functional components such as sensors, actuators, and electronics in a way that they penetrate multiple layers

ATLAS Thesis Award 2017

CERN Multimedia

Anthony, Katarina

2018-01-01

Winners of the ATLAS Thesis Award were presented with certificates and glass cubes during a ceremony on 22 February, 2018. They are pictured here with Karl Jakobs (ATLAS Spokesperson), Max Klein (ATLAS Collaboration Board Chair) and Katsuo Tokushuku (ATLAS Collaboration Board Deputy Chair).

Black thread disease, control measures and yield stimulation in Hevea brasiliensis in Liberia

NARCIS (Netherlands)

Schreurs, J.

1972-01-01

Described are investigations, carried out in 1963 to 1971 in Hevea brasiliensis at the Firestone Plantation at Harbel in Liberia. Studied was the tapping panel disease, black thread, caused by the fungus Phytophthora palmivora. The emphasis of the

ALICE gives its first thesis awards

CERN Multimedia

2008-01-01

For the first time the ALICE collaboration has given two of its doctoral students awards for their outstanding theses. Winners Christian Holm Christensen and Zaida Conesa del Valle holding their awards.On 29 October the ALICE collaboration honoured two students for their outstanding theses at a ceremony held at CERN. The two awards, one of which was given for a physics thesis and the other for a technical thesis, went to Zaida Conesa Del Valle (Laboratoire de physique subatomique et des technologies associées) and Christian Holm Christensen (Niels Bohr Institute) respectively. "It is very gratifying to see that the collaboration appreciates our work," said Zaida Conesa del Valle, winner of the physics award for her thesis: Performance of the ALICE Muon Spectrometer. Weak Boson Production and Measurement in Heavy Ion Collisions at the LHC. "I also feel specially thankful to all the people who worked with me," she added. "It was pl...

Modeling Anti-Air Warfare With Discrete Event Simulation and Analyzing Naval Convoy Operations

Science.gov (United States)

2016-06-01

W., & Scheaffer, R. L. (2008). Mathematical statistics with applications . Belmont, CA: Cengage Learning. 118 THIS PAGE INTENTIONALLY LEFT BLANK...WARFARE WITH DISCRETE EVENT SIMULATION AND ANALYZING NAVAL CONVOY OPERATIONS by Ali E. Opcin June 2016 Thesis Advisor: Arnold H. Buss Co...REPORT DATE June 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE MODELING ANTI-AIR WARFARE WITH DISCRETE EVENT

Adjustment of web-building initiation to high humidity: a constraint by humidity-dependent thread stickiness in the spider Cyrtarachne.

Science.gov (United States)

Baba, Yuki G; Kusahara, Miki; Maezono, Yasunori; Miyashita, Tadashi

2014-07-01

Cyrtarachne is an orb-weaving spider belonging to the subfamily Cyrtarachninae (Araneidae) which includes triangular-web-building Pasilobus and bolas spiders. The Cyrtarachninae is a group of spiders specialized in catching moths, which is thought to have evolved from ordinary orb-weaving araneids. Although the web-building time of nocturnal spiders is in general related to the time of sunset, anecdotal evidence has suggested variability of web-building time in Cyrtarachne and its closely related genera. This study has examined the effects of temperature, humidity, moonlight intensity, and prey (moths) availability on web-building time of Cyrtarachne bufo, Cyrtarachne akirai, and Cyrtarachne nagasakiensis. Generalized linear mixed model (GLMM) have revealed that humidity, and not prey availability, was the essential variable that explained the daily variability of web-building time. Experiments measuring thread stickiness under different humidities showed that, although the thread of Cyrtarachne was found to have strong stickiness under high humidity, low humidity caused a marked decrease of thread stickiness. By contrast, no obvious change in stickiness was seen in an ordinary orb-weaving spider, Larinia argiopiformis. These findings suggest that Cyrtarachne adjusts its web-building time to favorable conditions of high humidity maintaining strong stickiness, which enables the threads to work efficiently for capturing prey.

THESIS: terrestrial and habitable zone infrared spectroscopy spacecraft

Science.gov (United States)

Vasisht, G.; Swain, M. R.; Akeson, R. L.; Burrows, A.; Deming, D.; Grillmair, C. J.; Greene, T. P.

2008-07-01

THESIS is a concept for a medium class mission designed for spectroscopic characterization of extrasolar planets between 2-14 microns. The concept leverages off the recent first-steps made by Spitzer and Hubble in characterizing the atmospheres of alien gas giants. Under favourable circumstances, THESIS is capable of identifying biogenic molecules in habitable-zone planets, thereby determining conditions on worlds where life might exist. By systematically characterizing many worlds, from rocky planets to gas-giants, THESIS would deliver transformational science of profound interest to astronomers and the general public.

Difficulty with cuff deflation of reinforced tracheal tube caused by inflation line occlusion with silk thread ligation and fixation.

Science.gov (United States)

Gotoh, Sayoko; Sugiyama, Daisuke; Imai, Eriko; Kawamata, Mikito

2015-03-05

A reinforced tracheal tube, ligated with silk threads, was inserted into a tracheostomy orifice and fixed to the skin. The cuff inflation line of the reinforced tracheal tube became occluded. Reinforced 'armoured' tracheal tubes have a spiral of wire embedded into the wall of the tube to give strength and flexibility, and may be sharply bent without compromising the tube lumen. The tracheal cuff attached to the tube is inflated by injecting air through a narrow-diameter tube welded to the outside of the tracheal tube. When a reinforced tracheal tube is ligated and fixed with silk threads, it should be confirmed whether the tracheal tube cuff can be deflated and inflated after fixation. Moreover, because occlusion can be eliminated by removing all silk threads used to ligate a tracheal tube, they should be removed before extubation. 2015 BMJ Publishing Group Ltd.

Threading dislocation movement in AlGaN/GaN-on-Si high electron mobility transistors under high temperature reverse bias stressing

Directory of Open Access Journals (Sweden)

W. A. Sasangka

2016-09-01

Full Text Available Dislocations are known to be associated with both physical and electrical degradation mechanisms of AlGaN/GaN-on-Si high electron mobility transistors (HEMTs. We have observed threading dislocation movement toward the gate-edges in AlGaN/GaN-on-Si HEMT under high reverse bias stressing. Stressed devices have higher threading dislocation densities (i.e. ∼5 × 109/cm2 at the gate-edges, as compared to unstressed devices (i.e. ∼2.5 × 109/cm2. Dislocation movement correlates well with high tensile stress (∼1.6 GPa at the gate-edges, as seen from inverse piezoelectric calculations and x-ray synchrotron diffraction residual stress measurements. Based on Peierls stress calculation, we believe that threading dislocations move via glide in 〈 11 2 ¯ 0 〉 / { 1 1 ¯ 00 } and 〈 11 2 ¯ 0 〉 / { 1 1 ¯ 01 } slip systems. This result illustrates the importance of threading dislocation mobility in controlling the reliability of AlGaN/GaN-on-Si HEMTs.

Identification of the Process of Dynamic Stretching of Threads in Warp Knitting Technology Part II: Experimental Identification of the Process of Stretching Threads, with Verification of Rheological Models

Directory of Open Access Journals (Sweden)

Prążyńska Aleksandra

2018-03-01

Full Text Available The study is a continuation of the first part of the publication, concerning the theoretical analysis of sensitivity of rheological models of dynamically stretched thread. This part presents the experimental research on the characteristics of stretching forces as a function of time, in the context of comparing the obtained results with theoretical data.

Study of a Fine Grained Threaded Framework Design

International Nuclear Information System (INIS)

Jones, C D

2012-01-01

Traditionally, HEP experiments exploit the multiple cores in a CPU by having each core process one event. However, future PC designs are expected to use CPUs which double the number of processing cores at the same rate as the cost of memory falls by a factor of two. This effectively means the amount of memory per processing core will remain constant. This is a major challenge for LHC processing frameworks since the LHC is expected to deliver more complex events (e.g. greater pileup events) in the coming years while the LHC experiment's frameworks are already memory constrained. Therefore in the not so distant future we may need to be able to efficiently use multiple cores to process one event. In this presentation we will discuss a design for an HEP processing framework which can allow very fine grained parallelization within one event as well as supporting processing multiple events simultaneously while minimizing the memory footprint of the job. The design is built around the libdispatch framework created by Apple Inc. (a port for Linux is available) whose central concept is the use of task queues. This design also accommodates the reality that not all code will be thread safe and therefore allows one to easily mark modules or sub parts of modules as being thread unsafe. In addition, the design efficiently handles the requirement that events in one run must all be processed before starting to process events from a different run. After explaining the design we will provide measurements from simulating different processing scenarios where the processing times used for the simulation are drawn from processing times measured from actual CMS event processing.

Study of a Fine Grained Threaded Framework Design

Science.gov (United States)

Jones, C. D.

2012-12-01

Traditionally, HEP experiments exploit the multiple cores in a CPU by having each core process one event. However, future PC designs are expected to use CPUs which double the number of processing cores at the same rate as the cost of memory falls by a factor of two. This effectively means the amount of memory per processing core will remain constant. This is a major challenge for LHC processing frameworks since the LHC is expected to deliver more complex events (e.g. greater pileup events) in the coming years while the LHC experiment's frameworks are already memory constrained. Therefore in the not so distant future we may need to be able to efficiently use multiple cores to process one event. In this presentation we will discuss a design for an HEP processing framework which can allow very fine grained parallelization within one event as well as supporting processing multiple events simultaneously while minimizing the memory footprint of the job. The design is built around the libdispatch framework created by Apple Inc. (a port for Linux is available) whose central concept is the use of task queues. This design also accommodates the reality that not all code will be thread safe and therefore allows one to easily mark modules or sub parts of modules as being thread unsafe. In addition, the design efficiently handles the requirement that events in one run must all be processed before starting to process events from a different run. After explaining the design we will provide measurements from simulating different processing scenarios where the processing times used for the simulation are drawn from processing times measured from actual CMS event processing.

How to create a journal article from a thesis.

Science.gov (United States)

Ahern, Kathy

2012-01-01

To identify strategies to assist in the publication of research arising from a postgraduate thesis or dissertation. There are many benefits to publishing a journal article from a completed thesis, including contributing knowledge to the writer's chosen field, career enhancement and personal satisfaction. However, there are also numerous obstacles for the newly graduated student in crafting an article fit for a specialist publication from a thesis. The author conducted a search of the title, abstract and keywords of the Cinahl, Scopus and Proquest databases, from 1990 to 2010: The author searched for the words: 'journal article' or 'manuscript; 'thesis' or 'dissertation'. The author excluded papers if: they pertained to allocation of authorship to someone other than the academic adviser; related to undergraduate issues rather than graduate dissertations; were discussions of the merits of a PhD by 'publication' instead of 'by thesis'; were not published in a peer-reviewed journal; or were not in English. The relationship between adviser and student changes as the student becomes a graduate, and new roles for the student and adviser need to be negotiated. Students need to realise that writing a paper from a thesis is usually going to be more difficult than they anticipate, but the application of strategies discussed in this paper should make the task manageable. Furthermore, universities might wish to consider alternatives in which published papers emerge before the examination of a thesis, such as requiring students to write a paper as part of their coursework.

Evidence that the Ceratobasidium-like white-thread blight and black rot fungal pathogens from persimmon and tea crops in the Brazilian Atlantic Forest agroecosystem are two distinct phylospecies

Directory of Open Access Journals (Sweden)

Paulo C. Ceresini

2012-01-01

Full Text Available The white-thread blight and black rot (WTBR caused by basidiomycetous fungi of the genus Ceratobasidium is emerging as an important plant disease in Brazil, particularly for crop species in the Ericales such as persimmon (Diospyros kaki and tea (Camellia sinensis. However, the species identity of the fungal pathogen associated with either of these hosts is still unclear. In this work, we used sequence variation in the internal transcribed spacer regions, including the 5.8S coding region of rDNA (ITS-5.8S rDNA, to determine the phylogenetic placement of the local white-thread-blight-associated populations of Ceratobasidium sp. from persimmon and tea, in relation to Ceratobasidium species already described world-wide. The two sister populations of Ceratobasidium sp. from persimmon and tea in the Brazilian Atlantic Forest agroecosystem most likely represent distinct species within Ceratobasidium and are also distinct from C. noxium, the etiological agent of the first description of white-thread blight disease that was reported on coffee in India. The intraspecific variation for the two Ceratobasidium sp. populations was also analyzed using three mitochondrial genes (ATP6, nad1 and nad2. As reported for other fungi, variation in nuclear and mitochondrial DNA was incongruent. Despite distinct variability in the ITS-rDNA region these two populations shared similar mitochondrial DNA haplotypes.

Evidence that the Ceratobasidium-like white-thread blight and black rot fungal pathogens from persimmon and tea crops in the Brazilian Atlantic Forest agroecosystem are two distinct phylospecies.

Science.gov (United States)

Ceresini, Paulo C; Costa-Souza, Elaine; Zala, Marcello; Furtado, Edson L; Souza, Nilton L

2012-04-01

The white-thread blight and black rot (WTBR) caused by basidiomycetous fungi of the genus Ceratobasidium is emerging as an important plant disease in Brazil, particularly for crop species in the Ericales such as persimmon (Diospyros kaki) and tea (Camellia sinensis). However, the species identity of the fungal pathogen associated with either of these hosts is still unclear. In this work, we used sequence variation in the internal transcribed spacer regions, including the 5.8S coding region of rDNA (ITS-5.8S rDNA), to determine the phylogenetic placement of the local white-thread-blight-associated populations of Ceratobasidium sp. from persimmon and tea, in relation to Ceratobasidium species already described world-wide. The two sister populations of Ceratobasidium sp. from persimmon and tea in the Brazilian Atlantic Forest agroecosystem most likely represent distinct species within Ceratobasidium and are also distinct from C. noxium, the etiological agent of the first description of white-thread blight disease that was reported on coffee in India. The intraspecific variation for the two Ceratobasidium sp. populations was also analyzed using three mitochondrial genes (ATP6, nad1 and nad2). As reported for other fungi, variation in nuclear and mitochondrial DNA was incongruent. Despite distinct variability in the ITS-rDNA region these two populations shared similar mitochondrial DNA haplotypes.

Hope of Success and Fear of Failure Predicting Academic Procrastination Students Who Working on a Thesis

Directory of Open Access Journals (Sweden)

Sari Zakiah Akmal

2017-08-01

Full Text Available Students, who are working on the thesis, have some difficulties caused by internal and external factors. Those problems can disrupt the completion of their thesis, such as the tendency to do academic procrastination. Increasing achievement motivation can reduce academic procrastination. This study aims to look at the role of achievement motivation (hope of success and fear of failure in predicting academic procrastination. The study used a quantitative approach by distributing academic procrastination and achievement motivation questionnaires. The study involved 182 students who were working on a thesis as samples, which were obtained by using accidental sampling technique. Data were analyzed using multiple regressions. It showed that the hope of success and fear of failure have a significant role in predicting academic procrastination (R2 = 13.8%, F = 14,356, p <0.05. The hope of success can decrease academic procrastination, while fear of failure can improve it. Thus, interventions to reduce academic procrastination can be delivered by increasing students hope of success.

Towards Fast Reverse Time Migration Kernels using Multi-threaded Wavefront Diamond Tiling

KAUST Repository

Malas, T.

2015-09-13

Today’s high-end multicore systems are characterized by a deep memory hierarchy, i.e., several levels of local and shared caches, with limited size and bandwidth per core. The ever-increasing gap between the processor and memory speed will further exacerbate the problem and has lead the scientific community to revisit numerical software implementations to better suit the underlying memory subsystem for performance (data reuse) as well as energy efficiency (data locality). The authors propose a novel multi-threaded wavefront diamond blocking (MWD) implementation in the context of stencil computations, which represents the core operation for seismic imaging in oil industry. The stencil diamond formulation introduces temporal blocking for high data reuse in the upper cache levels. The wavefront optimization technique ensures data locality by allowing multiple threads to share common adjacent point stencil. Therefore, MWD is able to take up the aforementioned challenges by alleviating the cache size limitation and releasing pressure from the memory bandwidth. Performance comparisons are shown against the optimized 25-point stencil standard seismic imaging scheme using spatial and temporal blocking and demonstrate the effectiveness of MWD.

Comparative study on the mechanical property of silk thread from cocoons of Bombyx mori L.

Science.gov (United States)

Iizuka, E; Hachimori, A; Abe, K; Sunohara, M; Hiraide, Y; Ueyama, A; Kamo, K; Fujiwara, T; Nakamura, F; Uno, T

1983-01-01

Specimens of bave (undegummed silk thread) were collected from cocoons of various origins of parent silkworm races, such as Japanese, Chinese, European, Korean and tropical origins, and from as many races as possible. An apparatus was set up to measure the dynamic elastic modulus of these specimens. In all the categories of the races tested, the elastic modulus was linearly related to the size of bave, regardless of the portion of cocoon layer from which the specimens were taken. This correlation was concluded to be universal to the silk thread of Bombyx mori L. species; however, values of the regression coefficient and of the elastic modulus were susceptible to the origin of silkworm races, depending on whether they were native or improved.

Moisture properties of raised 3-thread fleece fabric knitted with different face and fleecy yarns

Directory of Open Access Journals (Sweden)

Alaa Arafa Badr

2016-09-01

So, in this study, nine three-thread fleece fabrics of different composition materials have been studied, where these knitted fabrics are produced in a special circular knitted machine. The developed fabrics are taken to measure, water vapor permeability “WVP”, gain%, air permeability, drying time, color difference, immersion time and bursting strength. The test results were discussed statistically with single factor ANOVA. From the experimental results, it has been observed that the difference between face and fleecy yarns material was highly significant for the whole fabric in the water vapor permeability, gain%, color difference and immersion time. Three-thread Fleece fabric knitted with Egyptian cotton for the face and fleecy yarns has the maximum bursting strength compared to other samples having Bamboo and Tencel yarns.

Too much control can hurt : A threaded cognition model of the attentional blink

NARCIS (Netherlands)

Taatgen, Niels A.; Juvina, Ion; Schipper, Marc; Borst, Jelmer P.; Martens, Sander

Explanations for the attentional blink (AB; a deficit in identifying the second of two targets when presented 200-500 ms after the first) have recently shifted from limitations in memory consolidation to disruptions in cognitive control. With a new model based on the threaded cognition theory of

78 FR 76815 - Steel Threaded Rod From India: Preliminary Affirmative Countervailing Duty Determination and...

Science.gov (United States)

2013-12-19

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-856] Steel Threaded Rod From..., International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (``the... CONTACT: Brooke Kennedy, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade...

The Content Analysis on Doctoral Thesies in Geomatic Engineering in Turkey

Directory of Open Access Journals (Sweden)

Tahsin BOZTOPRAK

2016-10-01

Full Text Available The purpose of this study is to reach a conclusion based on the synthesis of doctoral dissertations published about surveying (geomatic engineering by using content analysis. For this purpose, 325 doctoral dissertations published in Turkey were analyzed using content analysis technique. As a result of performed analysis, it has been determined that 70.46's% of doctoral dissertations have been published in the last fifteen years. It has been shown that most doctoral dissertations were published by Istanbul Technical University, Yıldız Technical University, Selçuk University and Karadeniz Technical University. Most of the doctorate studies have been carried out in the discipline of public measurements/ land management with the rate of %32.62. 89.54% of the publishing language of the PhD thesis is Turkish, the average number of pages is 156. 68.45% of the PhD thesis advisors have professor doctor title. The most covered subjects are geographic information systems (15.46%, GPS/GNSS (12.36% and satellite image analysis (11.24%.

Full covered self-expandable metal stents for the treatment of anastomotic leak using a silk thread.

Science.gov (United States)

Choi, Cheol Woong; Kang, Dae Hwan; Kim, Hyung Wook; Park, Su Bum; Kim, Su Jin; Hwang, Sun Hwi; Lee, Si Hak

2017-07-01

To evaluate the safety and effectiveness of fixation of the fully covered self-expandable metal stent (SEMS) placement using a silk thread for complete closure of an anastomotic leak. An anastomotic leak is a life-threatening complication after gastrectomy. Although the traditional treatment of choice was surgical re-intervention, an endoscopic SEMS can be used alternatively.During the study period, we retrospectively reviewed consecutive patients who received a modified covered SEMS capable of being fixed using a silk thread (Shim technique) due to an anastomotic leak after gastrectomy to prevent stent migration. Demographic data, stent placement and removal, clinical success, time to resolution, and complications were evaluated.A total of 7 patients underwent fully covered SEMS with a silk thread placement for an anastomotic leak after gastrectomy to treat gastric cancer. The patients' mean age was 71.3 ± 8.0 years. Man sex was predominant (85.7%). All patients' American Society of Anesthesiologists (ASA) scores were between I and III. Total gastrectomy was performed in 5 patients (71.4%) and proximal gastrectomy was performed in 2 patients (28.6%). The time between gastrectomy and stent insertion was 22.3 ± 11.1 days. The size of the leaks was 27.1 ± 11.1 mm. Technical success and complete leak closure were achieved in all patients. Stent migration was absent. All stents were removed between 4 and 6 weeks. Delayed esophageal stricture was found in 1 patient (14.2) and successfully resolved after endoscopic balloon dilation.For an anastomotic leak after gastrectomy, fully covered SEMS placement with a silk thread is an effective and safe treatment option without stent migration. The stent extraction time between 4 and 6 weeks was optimal without severe complications.

Integrating soft sensor systems using conductive thread

Science.gov (United States)

Teng, Lijun; Jeronimo, Karina; Wei, Tianqi; Nemitz, Markus P.; Lyu, Geng; Stokes, Adam A.

2018-05-01

We are part of a growing community of researchers who are developing a new class of soft machines. By using mechanically soft materials (MPa modulus) we can design systems which overcome the bulk-mechanical mismatches between soft biological systems and hard engineered components. To develop fully integrated soft machines—which include power, communications, and control sub-systems—the research community requires methods for interconnecting between soft and hard electronics. Sensors based upon eutectic gallium alloys in microfluidic channels can be used to measure normal and strain forces, but integrating these sensors into systems of heterogeneous Young’s modulus is difficult due the complexity of finding a material which is electrically conductive, mechanically flexible, and stable over prolonged periods of time. Many existing gallium-based liquid alloy sensors are not mechanically or electrically robust, and have poor stability over time. We present the design and fabrication of a high-resolution pressure-sensor soft system that can transduce normal force into a digital output. In this soft system, which is built on a monolithic silicone substrate, a galinstan-based microfluidic pressure sensor is integrated with a flexible printed circuit board. We used conductive thread as the interconnect and found that this method alleviates problems arising due to the mechanical mismatch between conventional metal wires and soft or liquid materials. Conductive thread is low-cost, it is readily wetted by the liquid metal, it produces little bending moment into the microfluidic channel, and it can be connected directly onto the copper bond-pads of the flexible printed circuit board. We built a bridge-system to provide stable readings from the galinstan pressure sensor. This system gives linear measurement results between 500-3500 Pa of applied pressure. We anticipate that integrated systems of this type will find utility in soft-robotic systems as used for wearable

Bridging Knowledge: A Collective Undergraduate Thesis Development Approach

Science.gov (United States)

Holdsworth, Jason K.; Arun, Özgür

2017-01-01

While there are various approaches to gerontological and geriatrics (and social sciences) education globally, a component commonly included in undergraduate education is a final thesis project. In Turkey, the Department of Gerontology at Akdeniz University has undertaken a unique approach to thesis development that values and draws on accessing…

Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial

OpenAIRE

Kohout, David

2013-01-01

in English Dissertation Thesis David Kohout: Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial This Dissertation on the topic of "Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial" seeks to analyze the main approaches to the prosecution and punishment of the Nazi crimes. It was chosen to use the trial of Adolf Eichmann in Jerusalem in years 1961 - 1962 as a connecting thread of this whole...

Thread-Lift Sutures : Still in the Lift? A Systematic Review of the Literature

NARCIS (Netherlands)

Gulbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

Background: In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have

Thread-Lift Sutures : Still in the Lift? A Systematic Review of the Literature

NARCIS (Netherlands)

Gülbitti, Haydar Aslan; Colebunders, Britt; Pirayesh, Ali; Bertossi, Dario; van der Lei, Berend

2018-01-01

BACKGROUND: In 2006, Villa et al. published a review article concerning the use of thread-lift sutures and concluded that the technique was still in its infancy but had great potential to become a useful and effective procedure for nonsurgical lifting of sagged facial tissues. As 11 years have

Cable-type supercapacitors of three-dimensional cotton thread based multi-grade nanostructures for wearable energy storage.

Science.gov (United States)

Liu, Nishuang; Ma, Wenzhen; Tao, Jiayou; Zhang, Xianghui; Su, Jun; Li, Luying; Yang, Congxing; Gao, Yihua; Golberg, Dmitri; Bando, Yoshio

2013-09-20

A novel cable-type flexible supercapacitor with excellent performance is fabricated using 3D polypyrrole(PPy)-MnO2 -CNT-cotton thread multi-grade nanostructure-based electrodes. The multiple supercapacitors with a high areal capacitance 1.49 F cm(-2) at a scan rate of 1 mV s(-1) connected in series and in parallel can successfully drive a LED segment display. Such an excellent performance is attributed to the cumulative effect of conducting single-walled carbon nanotubes on cotton thread, active mesoporous flower-like MnO2 nanoplates, and PPy conductive wrapping layer improving the conductivity, and acting as pseudocapacitance material simultaneously. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Analysis of Modeling Parameters on Threaded Screws.

Energy Technology Data Exchange (ETDEWEB)

Vigil, Miquela S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brake, Matthew Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vangoethem, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-06-01

Assembled mechanical systems often contain a large number of bolted connections. These bolted connections (joints) are integral aspects of the load path for structural dynamics, and, consequently, are paramount for calculating a structure's stiffness and energy dissipation prop- erties. However, analysts have not found the optimal method to model appropriately these bolted joints. The complexity of the screw geometry cause issues when generating a mesh of the model. This paper will explore different approaches to model a screw-substrate connec- tion. Model parameters such as mesh continuity, node alignment, wedge angles, and thread to body element size ratios are examined. The results of this study will give analysts a better understanding of the influences of these parameters and will aide in finding the optimal method to model bolted connections.

Distinct spinning patterns gain differentiated loading tolerance of silk thread anchorages in spiders with different ecology.

Science.gov (United States)

Wolff, Jonas O; van der Meijden, Arie; Herberstein, Marie E

2017-07-26

Building behaviour in animals extends biological functions beyond bodies. Many studies have emphasized the role of behavioural programmes, physiology and extrinsic factors for the structure and function of buildings. Structure attachments associated with animal constructions offer yet unrealized research opportunities. Spiders build a variety of one- to three-dimensional structures from silk fibres. The evolution of economic web shapes as a key for ecological success in spiders has been related to the emergence of high performance silks and thread coating glues. However, the role of thread anchorages has been widely neglected in those models. Here, we show that orb-web (Araneidae) and hunting spiders (Sparassidae) use different silk application patterns that determine the structure and robustness of the joint in silk thread anchorages. Silk anchorages of orb-web spiders show a greater robustness against different loading situations, whereas the silk anchorages of hunting spiders have their highest pull-off resistance when loaded parallel to the substrate along the direction of dragline spinning. This suggests that the behavioural 'printing' of silk into attachment discs along with spinneret morphology was a prerequisite for the evolution of extended silk use in a three-dimensional space. This highlights the ecological role of attachments in the evolution of animal architectures. © 2017 The Author(s).

Meditope-Fab interaction: threading the hole.

Science.gov (United States)

Bzymek, Krzysztof P; Ma, Yuelong; Avery, Kendra N; Horne, David A; Williams, John C

2017-12-01

Meditope, a cyclic 12-residue peptide, binds to a unique binding side between the light and heavy chains of the cetuximab Fab. In an effort to improve the affinity of the interaction, it was sought to extend the side chain of Arg8 in the meditope, a residue that is accessible from the other side of the meditope binding site, in order to increase the number of interactions. These modifications included an n-butyl and n-octyl extension as well as hydroxyl, amine and carboxyl substitutions. The atomic structures of the complexes and the binding kinetics for each modified meditope indicated that each extension threaded through the Fab `hole' and that the carboxyethylarginine substitution makes a favorable interaction with the Fab, increasing the half-life of the complex by threefold compared with the unmodified meditope. Taken together, these studies provide a basis for the design of additional modifications to enhance the overall affinity of this unique interaction.

An unusual case of foreign body aspiration mimicking cavitary tuberculosis in adolescent patient: Thread aspiration

Directory of Open Access Journals (Sweden)

Cakir Erkan

2012-05-01

Full Text Available Abstract Foreign body aspiration continues to be a serious problem in childhood and adolescent period with significant rate of morbidity and rarely mortality. Half of the foreign body aspiration cases have no history of aspiration. The main foreign bodies inhaled are food fragments and different kinds of metallic objects. A 12-year-old girl was referred to the pediatric pulmonology department for chronic cough and hemoptysis. She had persistent infiltration and cavitary lesion mimicking cavitary tuberculosis. There was no contact history with tuberculosis in her family and acid resistant bacillus was not found in the sputum examination. Flexible bronchoscopy was performed for persistent infiltration and hemoptysis and inflamed thread was found in right lower lobe bronchus. This is the first case of thread inhalation mimicking cavitary tuberculosis in an adolescent patient.

Text Analysis of Chemistry Thesis and Dissertation Titles

Science.gov (United States)

Scalfani, Vincent F.

2017-01-01

Programmatic text analysis can be used to understand patterns and reveal trends in data that would otherwise be difficult or impossible to uncover with manual coding methods. This work uses programmatic text analysis, specifically term frequency counts, to study nearly 10,000 chemistry thesis and dissertation titles from 1911-2015. The thesis and…

SURGICAL RECTIFICATION OF THREAD-ASSOCIATED GLOSSOPTOSIS IN PEAFOWLS

Directory of Open Access Journals (Sweden)

M. Athar, A. Shakoor, G. Muhammad, M.N. Asi, and M. Saqib

2001-02-01

Full Text Available Domesticated and/or caged peafowls (Pavo cristatus and other fancy birds suffer from a variety of disease conditions due to unnatural habitat and suboptimal managemental practices. The present article scribes glossoptosis (downward displacement of tongue in four juvenile peafowls caused by kite-flying read wrapped around the base of tongue and terminating somewhere in the lower gastrointestinal tract. The condition was characterized by difficulty in swallowing, chronic inappetance, gasping and a fading body condition. Severing of the proximal part of thread through crop and then unwinding it from the base .the tongue affected an instant relief. As far as could be ascertained, the condition under reference has not been reported heretofore in birds especially in peafowls.

Nature's longest threads new frontiers in the mathematics and physics of information in biology

CERN Document Server

Sreekantan, B V

2014-01-01

Organisms endowed with life show a sense of awareness, interacting with and learning from the universe in and around them. Each level of interaction involves transfer of information of various kinds, and at different levels. Each thread of information is interlinked with the other, and woven together, these constitute the universe — both the internal self and the external world — as we perceive it. They are, figuratively speaking, Nature's longest threads. This volume reports inter-disciplinary research and views on information and its transfer at different levels of organization by reputed scientists working on the frontier areas of science. It is a frontier where physics, mathematics and biology merge seamlessly, binding together specialized streams such as quantum mechanics, dynamical systems theory, and mathematics. The topics would interest a broad cross-section of researchers in life sciences, physics, cognition, neuroscience, mathematics and computer science, as well as interested amateurs, familia...

ATLAS Thesis Awards 2015

CERN Multimedia

Biondi, Silvia

2016-01-01

Winners of the ATLAS Thesis Award were presented with certificates and glass cubes during a ceremony on Thursday 25 February. The winners also presented their work in front of members of the ATLAS Collaboration. Winners: Javier Montejo Berlingen, Barcelona (Spain), Ruth Pöttgen, Mainz (Germany), Nils Ruthmann, Freiburg (Germany), and Steven Schramm, Toronto (Canada).

Inspirational Catalogue of Master Thesis Proposals 2015

DEFF Research Database (Denmark)

Thorndahl, Søren

2015-01-01

This catalog presents different topics for master thesis projects. It is important to emphasize that the project descriptions only serves as an inspiration and that you always can discuss with the potential supervisors the specific contents of a project.......This catalog presents different topics for master thesis projects. It is important to emphasize that the project descriptions only serves as an inspiration and that you always can discuss with the potential supervisors the specific contents of a project....

Implementing and analyzing the multi-threaded LP-inference

Science.gov (United States)

Bolotova, S. Yu; Trofimenko, E. V.; Leschinskaya, M. V.

2018-03-01

The logical production equations provide new possibilities for the backward inference optimization in intelligent production-type systems. The strategy of a relevant backward inference is aimed at minimization of a number of queries to external information source (either to a database or an interactive user). The idea of the method is based on the computing of initial preimages set and searching for the true preimage. The execution of each stage can be organized independently and in parallel and the actual work at a given stage can also be distributed between parallel computers. This paper is devoted to the parallel algorithms of the relevant inference based on the advanced scheme of the parallel computations “pipeline” which allows to increase the degree of parallelism. The author also provides some details of the LP-structures implementation.

Writing a Thesis Differently

Science.gov (United States)

Honan, Eileen; Bright, David

2016-01-01

In this paper we explore the contributions that Deleuze and Guattari have made to thinking/writing language and how these ideas can be put to work in producing a doctoral thesis. We contribute to the field of work within what Patti Lather and Elizabeth St Pierre have called the "post-qualitative" movement, where researchers attempt to…

[A novel method based on Y-shaped cotton-polyester thread microfluidic channel].

Science.gov (United States)

Wang, Lu; Shi, Yan-ru; Yan, Hong-tao

2014-08-01

A novel method based on Y-shaped microfluidic channel was firstly proposed in this study. The microfluidic channel was made of two cotton-polyester threads based on the capillary effect of cotton-polyester threads for the determination solutions. A special device was developed to fix the Y-shaped microfluidic channel by ourselves, through which the length and the tilt angle of the channel can be adjusted as requested. The spectrophotometry was compared with Scan-Adobe Photoshop software processing method. The former had a lower detection limit while the latter showed advantages in both convenience and fast operations and lower amount of samples. The proposed method was applied to the determination of nitrite. The linear ranges and detection limits are 1.0-70 micromol x L(-1), 0.66 micromol x L(-1) (spectrophotometry) and 50-450 micromol x L(-1), 45.10 micromol x L(-1) (Scan-Adobe Photoshop software processing method) respectively. This method has been successfully used to the determination of nitrite in soil samples and moat water with recoveries between 96.7% and 104%. It was proved that the proposed method was a low-cost, rapid and convenient analytical method with extensive application prospect.

Processing data communications events by awakening threads in parallel active messaging interface of a parallel computer

Science.gov (United States)

Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2016-03-15

Processing data communications events in a parallel active messaging interface (`PAMI`) of a parallel computer that includes compute nodes that execute a parallel application, with the PAMI including data communications endpoints, and the endpoints are coupled for data communications through the PAMI and through other data communications resources, including determining by an advance function that there are no actionable data communications events pending for its context, placing by the advance function its thread of execution into a wait state, waiting for a subsequent data communications event for the context; responsive to occurrence of a subsequent data communications event for the context, awakening by the thread from the wait state; and processing by the advance function the subsequent data communications event now pending for the context.

Agent-based Modeling Methodology for Analyzing Weapons Systems

Science.gov (United States)

2015-03-26

technique involve model structure, system representation and the degree of validity, coupled with the simplicity, of the overall model. ABM is best suited... system representation of the air combat system . We feel that a simulation model that combines ABM with equation-based representation of weapons and...AGENT-BASED MODELING METHODOLOGY FOR ANALYZING WEAPONS SYSTEMS THESIS Casey D. Connors, Major, USA

End-threaded intramedullary positive profile screw ended self-tapping pin (Admit pin) - A cost-effective novel implant for fixing canine long bone fractures.

Science.gov (United States)

Chanana, Mitin; Kumar, Adarsh; Tyagi, Som Prakash; Singla, Amit Kumar; Sharma, Arvind; Farooq, Uiase Bin

2018-02-01

The current study was undertaken to evaluate the clinical efficacy of end-threaded intramedullary pinning for management of various long bone fractures in canines. This study was conducted in two phases, managing 25 client-owned dogs presented with different fractures. The technique of application of end-threaded intramedullary pinning in long bone fractures was initially standardized in 6 clinical patients presented with long bone fractures. In this phase, end-threaded pins of different profiles, i.e., positive and negative, were used as the internal fixation technique. On the basis of results obtained from standardization phase, 19 client-owned dogs clinically presented with different fractures were implanted with end-threaded intramedullary positive profile screw ended self-tapping pin in the clinical application phase. The patients, allocated randomly in two groups, when evaluated postoperatively revealed slight pin migration in Group-I (negative profile), which resulted in disruption of callus site causing delayed union in one case and large callus formation in other two cases whereas no pin migration was observed in Group-II (positive profile). Other observations in Group-I was reduced muscle girth and delayed healing time as compared to Group-II. In clinical application, phase 21 st and 42 nd day post-operative radiographic follow-up revealed no pin migration in any of the cases, and there was no bone shortening or fragment collapse in end-threaded intramedullary positive profile screw ended self-tapping pin. The end-threaded intramedullary positive profile screw ended self-tapping pin used for fixation of long bone fractures in canines can resist pin migration, pin breakage, and all loads acting on the bone, i.e., compression, tension, bending, rotation, and shearing to an extent with no post-operative complications.

Action learning in undergraduate engineering thesis supervision

Directory of Open Access Journals (Sweden)

Brad Stappenbelt

2017-03-01

Full Text Available In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative, investigated the influence of the action learning environment on student approaches to learning and any accompanying academic, learning and personal benefits realised. The influence of preferred learning styles on set function and student adoption of the action learning process were also examined. The action learning environment implemented had a measurable significant positive effect on student academic performance, their ability to cope with the stresses associated with conducting a research thesis, the depth of learning, the development of autonomous learners and student perception of the research thesis experience. The present study acts as an addendum to a smaller scale implementation of this action learning approach, applied to supervision of third and fourth year research projects and theses, published in 2010.

Effects of Coatings on the High-Cycle Fatigue Life of Threaded Steel Samples

Science.gov (United States)

Eder, M. A.; Haselbach, P. U.; Mishin, O. V.

2018-05-01

In this work, high-cycle fatigue is studied for threaded cylindrical high-strength steel samples coated using three different industrial processes: black oxidation, normal-temperature galvanization and high-temperature galvanization. The fatigue performance in air is compared with that of uncoated samples. Microstructural characterization revealed the abundant presence of small cracks in the zinc coating partially penetrating into the steel. This is consistent with the observation of multiple crack initiation sites along the thread in the galvanized samples, which led to crescent type fracture surfaces governed by circumferential growth. In contrast, the black oxidized and uncoated samples exhibited a semicircular segment type fracture surface governed by single-sided growth with a significantly longer fatigue life. Numerical fatigue life prediction based on an extended Paris-law formulation has been conducted on two different fracture cases: 2D axisymmetric multisided crack growth and 3D single-sided crack growth. The results of this upper-bound and lower-bound approach are in good agreement with experimental data and can potentially be used to predict the lifetime of bolted components.

HMMerThread: detecting remote, functional conserved domains in entire genomes by combining relaxed sequence-database searches with fold recognition.

Directory of Open Access Journals (Sweden)

Charles Richard Bradshaw

Full Text Available Conserved domains in proteins are one of the major sources of functional information for experimental design and genome-level annotation. Though search tools for conserved domain databases such as Hidden Markov Models (HMMs are sensitive in detecting conserved domains in proteins when they share sufficient sequence similarity, they tend to miss more divergent family members, as they lack a reliable statistical framework for the detection of low sequence similarity. We have developed a greatly improved HMMerThread algorithm that can detect remotely conserved domains in highly divergent sequences. HMMerThread combines relaxed conserved domain searches with fold recognition to eliminate false positive, sequence-based identifications. With an accuracy of 90%, our software is able to automatically predict highly divergent members of conserved domain families with an associated 3-dimensional structure. We give additional confidence to our predictions by validation across species. We have run HMMerThread searches on eight proteomes including human and present a rich resource of remotely conserved domains, which adds significantly to the functional annotation of entire proteomes. We find ∼4500 cross-species validated, remotely conserved domain predictions in the human proteome alone. As an example, we find a DNA-binding domain in the C-terminal part of the A-kinase anchor protein 10 (AKAP10, a PKA adaptor that has been implicated in cardiac arrhythmias and premature cardiac death, which upon stress likely translocates from mitochondria to the nucleus/nucleolus. Based on our prediction, we propose that with this HLH-domain, AKAP10 is involved in the transcriptional control of stress response. Further remotely conserved domains we discuss are examples from areas such as sporulation, chromosome segregation and signalling during immune response. The HMMerThread algorithm is able to automatically detect the presence of remotely conserved domains in

CNTs threaded (001) exposed TiO2 with high activity in photocatalytic NO oxidation.

Science.gov (United States)

Xiao, Shuning; Zhu, Wei; Liu, Peijue; Liu, Fanfan; Dai, Wenrui; Zhang, Dieqing; Chen, Wei; Li, Hexing

2016-02-07

A microwave-ionothermal strategy was developed for in situ synthesis of CNTs threaded TiO2 single crystal with a tunable percentage of surface exposed (001) active facets. The CNTs were used as microwave antennas to create local "super hot" dots to induce Ti(3+) adsorption and hydrolysis, thereby leading to a good assembly of (001) facets exposed single crystalline TiO2 threaded by the CNTs in the presence of Hmim[BF4] ionic liquid. Due to the high percentage of the active (001) facets of single crystal TiO2 and the direct electron transfer property of the CNTs, the as-prepared CNTs-TiO2 composite showed a photocatalytic NO removal ratio of up to 76.8% under UV irradiation. In addition, with self-doped Ti(3+), the CNTs-TiO2 composite also exhibited an enhanced activity under irradiation with either solar lights or visible lights, showing good potential in practical applications for environmental remediation.

Runtime Speculative Software-Only Fault Tolerance

Science.gov (United States)

2012-06-01

Threading DAFT [67] 1× Yes 2 - Most None 38% - Process-based PLR [49] 2× No 2 3 Most Some 16.9% 41% Redundancy RSFT[This Thesis] 2× No 2 2 Most All 3.54...with lower fault cover- age. Redundant multi-threading techniques (e.g. SRMT [60] and DAFT [67]) use multiple threads to execute program codes...fault detection, such as EDDI [35], SWIFT [44], SRMT [60], DAFT [67], and Shoestring [12], all require program source code for recompilation, and cannot

High Resolution Modelling of the Congo River's Multi-Threaded Main Stem Hydraulics

Science.gov (United States)

Carr, A. B.; Trigg, M.; Tshimanga, R.; Neal, J. C.; Borman, D.; Smith, M. W.; Bola, G.; Kabuya, P.; Mushie, C. A.; Tschumbu, C. L.

2017-12-01

We present the results of a summer 2017 field campaign by members of the Congo River users Hydraulics and Morphology (CRuHM) project, and a subsequent reach-scale hydraulic modelling study on the Congo's main stem. Sonar bathymetry, ADCP transects, and water surface elevation data have been collected along the Congo's heavily multi-threaded middle reach, which exhibits complex in-channel hydraulic processes that are not well understood. To model the entire basin's hydrodynamics, these in-channel hydraulic processes must be parameterised since it is not computationally feasible to represent them explicitly. Furthermore, recent research suggests that relative to other large global rivers, in-channel flows on the Congo represent a relatively large proportion of total flow through the river-floodplain system. We therefore regard sufficient representation of in-channel hydraulic processes as a Congo River hydrodynamic research priority. To enable explicit representation of in-channel hydraulics, we develop a reach-scale (70 km), high resolution hydraulic model. Simulation of flow through individual channel threads provides new information on flow depths and velocities, and will be used to inform the parameterisation of a broader basin-scale hydrodynamic model. The basin-scale model will ultimately be used to investigate floodplain fluxes, flood wave attenuation, and the impact of future hydrological change scenarios on basin hydrodynamics. This presentation will focus on the methodology we use to develop a reach-scale bathymetric DEM. The bathymetry of only a small proportion of channel threads can realistically be captured, necessitating some estimation of the bathymetry of channels not surveyed. We explore different approaches to this bathymetry estimation, and the extent to which it influences hydraulic model predictions. The CRuHM project is a consortium comprising the Universities of Kinshasa, Rhodes, Dar es Salaam, Bristol, and Leeds, and is funded by Royal

Atmospheric pressure H20 plasma treatment of polyester cord threads

International Nuclear Information System (INIS)

Simor, M.; Krump, H.; Hudec, I.; Rahel, J.; Brablec, A.; Cernak, M.

2004-01-01

Polyester cord threads, which are used as a reinforcing materials of rubber blend, have been treated in atmospheric-pressure H 2 0 plasma in order to enhance their adhesion to rubber. The atmospheric-pressure H 2 0 plasma was generated in an underwater diaphragm discharge. The plasma treatment resulted in approximately 100% improvement in the adhesion. Scanning electron microscopy investigation indicates that not only introduced surface polar groups but also increased surface area of the fibres due to a fibre surface roughening are responsible for the improved adhesive strength (Authors)

Thread-Level Parallel Indexing of Update Intensive Moving-Object Workloads

DEFF Research Database (Denmark)

Sidlauskas, Darius; Ross, Kenneth A.; Jensen, Christian S.

2011-01-01

as well as contain queries. The non-trivial challenge addressed is that of avoiding contention between long-running queries and frequent updates. Specifically, the paper proposes a grid-based indexing technique. A static grid indexes a near up-to-date snapshot of the data to support queries, while a live......Modern processors consist of multiple cores that each support parallel processing by multiple physical threads, and they offer ample main-memory storage. This paper studies the use of such processors for the processing of update-intensive moving-object workloads that contain very frequent updates...

Going beyond the Thesis

Science.gov (United States)

Smith, Andrew C.

2010-01-01

Most every writing teacher can relate to the curse of reading yet another incoherent essay, the contents of which resemble an unorganized junk drawer of thoughts. Such essays cry out for a main idea. The remedy is a thesis, and teachers rightly take pains to help students discover this. Yet in spite of this, writing teachers ought to bear in mind…

Structure and stability of threading edge and screw dislocations in bulk GaN

Czech Academy of Sciences Publication Activity Database

Gröger, Roman; Leconte, L.; Ostapovets, Andriy

2015-01-01

Roč. 99, MAR (2015), s. 195-202 ISSN 0927-0256 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0068; GA MŠk(CZ) EE2.3.30.0063 Institutional support: RVO:68081723 Keywords : Threading dislocation * Edge * Screw * GaN Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.086, year: 2015

Surface Analysis of the Laser Cleaned Metal Threads

Science.gov (United States)

Sokhan, M.; Hartog, F.; McPhail, D.

The laser cleaning of the tarnished silver threads was carried out using Nd:YAG laser radiation at IR (1064 nm) and visible wavelengths (532 nm). The preliminary tests were made on the piece of silk with the silver embroidery with the clean and tarnished areas. FIBS and SIMS analysis were used for analysing the condition of the surface before and after laser irradiation. It was found that irradiation below 0.4 J/cm-2 and higher than 1.0 J/cm-2 fluences aggravates the process of tarnishing and leads to the yellowing effect. The results of preliminary tests were used for finding the optimum cleaning regime for the laser cleaning of the real museum artefact: "Women Riding Jacket" dated to the beginning of 18th century.

Senior Thesis Research at Princeton.

Science.gov (United States)

Prud'homme, Robert K.

1981-01-01

Reviews a senior undergraduate research program in chemical engineering at Princeton University. Includes strengths and requirements for a successful program. Senior thesis research provides creative problem solving experiences for students and is congruent with departmental research objectives. Selected student comments are included. (SK)

The effect of implant macro-thread design on implant stability in the early post-operative period: a randomized, controlled pilot study.

Science.gov (United States)

McCullough, Jeffrey J; Klokkevold, Perry R

2017-10-01

Available literature suggests there is a transient drop in implant stability from approximately week 0 to week 3-4 as a result of peri-implant bone remodeling as it transitions from a primary, mechanical stability to a secondary, biological stability. Research investigating the influence of macro-thread design on this process is scant. The specific aim of this study was to evaluate the role of macro-thread design on implant stability in the early post-operative healing period using resonance frequency analysis (RFA). Seven patients, each missing at least two posterior teeth in the same arch, were included in the study. Three patients qualified for four implants resulting in a total of 10 matched pairs. All sites were healed (>6 months), non-grafted sites with sufficient bone to place implants. Each site in a matched pair was randomly assigned to receive either a control (Megagen EZ Plus Internal; EZ) or test (Megagen AnyRidge; AR) implant. The test implant incorporates a novel thread design with a wide thread depth and increased thread pitch. RFA was used to determine implant stability quotient (ISQ) values for each implant at the time of placement and weekly for the first 8 weeks. Implants consistently achieved a relatively high insertion torque (30-45 N/cm) and high initial ISQ value (79.8 ± 1.49). Baseline ISQ values for test (AR; 79.55 ± 1.61) and control (EZ; 80.05 ± 1.37) implants were similar. A general pattern of stability from baseline through all eight follow-up evaluations was observed for the test implants. A pattern of decreasing ISQ values was observed for the control implants across the early follow-up evaluations up to week four, where the value plateaued. There was a statistically significant main effect due to implant type (P implant type and time (P implants performed differently at certain time points. Within the limitations of this study, macro-thread design appears to play a role in implant stability in the early post

The finite-dimensional Freeman thesis.

Science.gov (United States)

Rudolph, Lee

2008-06-01

I suggest a modification--and mathematization--of Freeman's thesis on the relations among "perception", "the finite brain", and "the world", based on my recent proposal that the theory of finite topological spaces is both an adequate and a natural mathematical foundation for human psychology.

Safety hazard Iran? Between nuclear thread and peaceful use of nuclear energy

International Nuclear Information System (INIS)

Schroeter, Lothar

2013-01-01

The volume on Iran between nuclear thread and peaceful use of nuclear energy covers the following contributions: Iran versus USA: labor pains of a new world order; certainties, speculations and lack of knowledge; The nuclear conflict as symptom of deeper conflicts of the Middle East; Peaceful use of nuclear energy? The Iranian nuclear conflict; Satellite broadcast in Iranian backyards; An American invention becoming a doom for the Iran.

Master’s Thesis Supervision: Feedback, interpersonal relationships, and adaptivity

NARCIS (Netherlands)

de Kleijn, R.A.M.

2013-01-01

In most academic master’s programmes the final component is conducting a piece of research, a master’s thesis. In this dissertation master’s thesis supervision is investigated from a feedback and interpersonal perspective, in order to provide more insight into its quality. The quality of master’s

On the (1 + 3) threading of spacetime with respect to an arbitrary timelike vector field

Energy Technology Data Exchange (ETDEWEB)

Bejancu, Aurel [Kuwait University, Department of Mathematics, P.O.Box 5969, Safat (Kuwait); Calin, Constantin [Technical University ' ' Gh.Asachi' ' , Department of Mathematics, Iasi (Romania)

2015-04-15

We develop a newapproach on the (1 + 3) threading of spacetime (M, g) with respect to a congruence of curves defined by an arbitrary timelike vector field. The study is based on spatial tensor fields and on theRiemannian spatial connection ∇*, which behave as 3D geometric objects. We obtain new formulas for local components of the Ricci tensor field of (M, g) with respect to the threading frame field, in terms of the Ricci tensor field of ∇* and of kinematic quantities. Also, new expressions for time covariant derivatives of kinematic quantities are stated. In particular, a new form of Raychaudhuri's equation enables us to prove Lemma 6.3, which completes a well-known lemma used in the proof of the Penrose-Hawking singularity theorems. Finally, we apply the new (1 + 3) formalism to the study of the dynamics of a Kerr-Newman black hole. (orig.)

Analysis of the failed threaded rod from the support of the pipelines from CNE Cernavoda

International Nuclear Information System (INIS)

Fulger, M.; Mihalache, M.; Velciu, L.; Nitu, A.; Puscasu, C.

2016-01-01

The goal of the current study was analysis of one threaded rod from the support of pipelines from CNE Cernavoda raw water cooling system (RCW) to identify the causes of its breakage. For the failure analysis, were used following techniques: optical microscopy, scanning electron microscopy/ energy dispersive X - ray spectrometry (EDS) and mechanical tries (Brinell hardness). The conclusion was the failure had been caused by improper mounting of the rod in the spring guide system. Thus, a complex distribution of tensions emerged, rather than the vertical distribution as designed for the guide with spring. On the other hand, the presence of a hard impurity (titanium carbide), in the threaded region and the usage of a material with greater hardness and with higher chrome composition than specified in the project, had favored the appearance of a fatigue fissure, leading to a tear in the rod. (authors)

Representing Social Network and Research Diversity of Library and Information Science in Taiwan Using Thesis Advisory Network

Directory of Open Access Journals (Sweden)

董采維 Tsai-Wei Tung

2014-10-01

Full Text Available Drawing from thesis committee membership data, the study took a social analytical approach toanalyze the social and intellectual structure of the field of LIS (Library and Information Science inTaiwan. Specifically, the study attempt to study: firstly, the faculty collaboration network; andsecondly, the degree and nature of inter-disciplinary collaboration, as reflected in the compositionof the thesis committees. A total 751 Master’s theses published by the eight LIS in the periodsfrom 2006 to 2011 were analyzed. Data extracted included the composition of each committeemember-ship and research topics covered in these theses. Furthermore, data about the faculty’sbackground were also collected, including gender, seniority, department affiliation, highest degreereceived, with which the faculty’s degree of interdisciplinary collaboration, as reflected in the thesiscommittee they appeared, could be analyzed. With the theses committee composition data, networksof faculty collaboration were generated where each faulty member were represented by a node,and the strength of their collaboration was represented by the frequency of their co-appeared inthese committees. Various network measures, such as centrality, clustering coefficient, E-I indexwere used to study the cohesion of each department and the LIS filed as a whole. Three diversitymeasures: Shannon, Simpson, and Gini coefficient, were used to assess the degree of interdisciplinarityof each department and faculty. Regression analyses showed that the number of these advised,seniority, and thesis topic diversity were the significant predictor of a faculty’s centrality in the LISnetwork.

Rethinking neuroethics in the light of the extended mind thesis.

Science.gov (United States)

Levy, Neil

2007-09-01

The extended mind thesis is the claim that mental states extend beyond the skulls of the agents whose states they are. This seemingly obscure and bizarre claim has far-reaching implications for neuroethics, I argue. In the first half of this article, I sketch the extended mind thesis and defend it against criticisms. In the second half, I turn to its neuroethical implications. I argue that the extended mind thesis entails the falsity of the claim that interventions into the brain are especially problematic just because they are internal interventions, but that many objections to such interventions rely, at least in part, on this claim. Further, I argue that the thesis alters the focus of neuroethics, away from the question of whether we ought to allow interventions into the mind, and toward the question of which interventions we ought to allow and under what conditions. The extended mind thesis dramatically expands the scope of neuroethics: because interventions into the environment of agents can count as interventions into their minds, decisions concerning such interventions become questions for neuroethics.

Collaborating for Success: Team Teaching the Engineering Technical Thesis

Science.gov (United States)

Keating, Terrence; Long, Mike

2012-01-01

This paper will examine the collaborative teaching process undertaken at College of the North Atlantic-Qatar (CNA-Q) by Engineering and the Communication faculties to improve the overall quality of engineering students' capstone projects known as the Technical Thesis. The Technical Thesis is divided into two separate components: a proposal stage…

PhD thesis defense | Kemoli | East African Medical Journal

African Journals Online (AJOL)

A thesis oral defence is the culmination of research enquiryon a specific subject or project. The defence provides an opportunity for presentation and sustained argument in support of the findings. This is preceded by examination of the thesis by indipendent nominated examiners who do not communicate on the work as ...

Importance and benefits of the doctoral thesis for medical graduates

Science.gov (United States)

Giesler, Marianne; Boeker, Martin; Fabry, Götz; Biller, Silke

2016-01-01

Introduction: The majority of medical graduates in Germany complete a doctorate, even though a doctoral degree is not necessary for the practice of medicine. So far, little is known about doctoral candidates’ view on the individual benefit a doctoral thesis has for them. Consequently, this is the subject of the present investigation. Method: Data from surveys with graduates of the five medical faculties of Baden-Württemberg from the graduation years 2007/2008 (N=514) and 2010/2011 (N=598) were analysed. Results: One and a half years after graduating 53% of those interviewed had completed their doctorate. When asked about their motivation for writing a doctoral thesis, participants answered most frequently “a doctorate is usual” (85%) and “improvement of job opportunities” (75%), 36% said that an academic career has been their primary motive. Less than 10% responded that they used their doctoral thesis as a means to apply for a job. The proportion of graduates working in health care is equally large among those who have completed a thesis and those who have not. Graduates who pursued a thesis due to scientific interest are also currently more interested in an academic career and recognise more opportunities for research. An implicit benefit of a medical thesis emerged with regard to the self-assessment of scientific competences as those who completed a doctorate rated their scientific competencies higher than those who have not. Discussion: Although for the majority of physicians research interest is not the primary motivation for completing a doctorate, they might nevertheless achieve some academic competencies. For graduates pursuing an academic career the benefit of completing a medical thesis is more obvious. PMID:26958656

Importance and benefits of the doctoral thesis for medical graduates.

Science.gov (United States)

Giesler, Marianne; Boeker, Martin; Fabry, Götz; Biller, Silke

2016-01-01

The majority of medical graduates in Germany complete a doctorate, even though a doctoral degree is not necessary for the practice of medicine. So far, little is known about doctoral candidates' view on the individual benefit a doctoral thesis has for them. Consequently, this is the subject of the present investigation. Data from surveys with graduates of the five medical faculties of Baden-Württemberg from the graduation years 2007/2008 (N=514) and 2010/2011 (N=598) were analysed. One and a half years after graduating 53% of those interviewed had completed their doctorate. When asked about their motivation for writing a doctoral thesis, participants answered most frequently "a doctorate is usual" (85%) and "improvement of job opportunities" (75%), 36% said that an academic career has been their primary motive. Less than 10% responded that they used their doctoral thesis as a means to apply for a job. The proportion of graduates working in health care is equally large among those who have completed a thesis and those who have not. Graduates who pursued a thesis due to scientific interest are also currently more interested in an academic career and recognise more opportunities for research. An implicit benefit of a medical thesis emerged with regard to the self-assessment of scientific competences as those who completed a doctorate rated their scientific competencies higher than those who have not. Although for the majority of physicians research interest is not the primary motivation for completing a doctorate, they might nevertheless achieve some academic competencies. For graduates pursuing an academic career the benefit of completing a medical thesis is more obvious.

Importance and benefits of the doctoral thesis for medical graduates

Directory of Open Access Journals (Sweden)

Giesler, Marianne

2016-02-01

Full Text Available Introduction: The majority of medical graduates in Germany complete a doctorate, even though a doctoral degree is not necessary for the practice of medicine. So far, little is known about doctoral candidates’ view on the individual benefit a doctoral thesis has for them. Consequently, this is the subject of the present investigation.Method: Data from surveys with graduates of the five medical faculties of Baden-Württemberg from the graduation years 2007/2008 (N=514 and 2010/2011 (N=598 were analysed.Results: One and a half years after graduating 53% of those interviewed had completed their doctorate. When asked about their motivation for writing a doctoral thesis, participants answered most frequently “a doctorate is usual” (85% and “improvement of job opportunities” (75%, 36% said that an academic career has been their primary motive. Less than 10% responded that they used their doctoral thesis as a means to apply for a job. The proportion of graduates working in health care is equally large among those who have completed a thesis and those who have not. Graduates who pursued a thesis due to scientific interest are also currently more interested in an academic career and recognise more opportunities for research. An implicit benefit of a medical thesis emerged with regard to the self-assessment of scientific competences as those who completed a doctorate rated their scientific competencies higher than those who have not.Discussion: Although for the majority of physicians research interest is not the primary motivation for completing a doctorate, they might nevertheless achieve some academic competencies. For graduates pursuing an academic career the benefit of completing a medical thesis is more obvious.

77 FR 71776 - Certain Steel Threaded Rod From the People's Republic of China: Affirmative Preliminary...

Science.gov (United States)

2012-12-04

... From the People's Republic of China: Affirmative Preliminary Determination of Circumvention of the... Analysis Memorandum for the Circumvention Inquiry of the Antidumping Duty Order on Certain Steel Threaded... Scope of the Order. \\3\\ See Order. Scope of the Circumvention Inquiry The merchandise subject to this...

Low threading dislocation density aluminum nitride on silicon carbide through the use of reduced temperature interlayers

KAUST Repository

Foronda, Humberto M.; Wu, Feng; Zollner, Christian; Alif, Muhammad Esmed; Saifaddin, Burhan; Almogbel, Abdullah; Iza, Michael; Nakamura, Shuji; DenBaars, Steven P.; Speck, James S.

2017-01-01

temperature on the AlN crystal quality, defect density, and surface morphology. The crystal quality was characterized using omega rocking curve scans and the threading dislocation density was determined by plan view transmission electron microscopy. The growth

What Works for Doctoral Students in Completing Their Thesis?

Science.gov (United States)

Lindsay, Siân

2015-01-01

Writing a thesis is one of the most challenging activities that a doctoral student must undertake and can represent a barrier to timely completion. This is relevant in light of current and widespread concerns regarding doctoral completion rates. This study explored thesis writing approaches of students post or near Ph.D. completion through…

A functional programming interpreter. M.S. Thesis

Science.gov (United States)

Robison, Arch Douglas

1987-01-01

Functional Programming (FP) sup BAC87 is an alternative to conventional imperative programming languages. This thesis describes an FP interpreter implementation. Superficially, FP appears to be a simple, but very inefficient language. Its simplicity, however, allows it to be interpreted quickly. Much of the inefficiency can be removed by simple interpreter techniques. This thesis describes the Illinois Functional Programming (IFP) interpreter, an interactive functional programming implementation which runs under both MS-DOS and UNIX. The IFP interpreter allows functions to be created, executed, and debugged in an environment very similar to UNIX. IFP's speed is competitive with other interpreted languages such as BASIC.

Multi-Threaded Dense Linear Algebra Libraries for Low-Power Asymmetric Multicore Processors

OpenAIRE

Catalán, Sandra; Herrero, José R.; Igual, Francisco D.; Rodríguez-Sánchez, Rafael; Quintana-Ortí, Enrique S.

2015-01-01

Dense linear algebra libraries, such as BLAS and LAPACK, provide a relevant collection of numerical tools for many scientific and engineering applications. While there exist high performance implementations of the BLAS (and LAPACK) functionality for many current multi-threaded architectures,the adaption of these libraries for asymmetric multicore processors (AMPs)is still pending. In this paper we address this challenge by developing an asymmetry-aware implementation of the BLAS, based on the...

[Analysis of master degree thesis of otolaryngology head and neck surgery in Xinjiang].

Science.gov (United States)

Ayiheng, Qukuerhan; Niliapaer, Alimu; Yalikun, Yasheng

2010-12-01

To understand the basic situation and development of knowledge structure and ability of master degree of Otolaryngology Head and Neck Surgery in Xinjiang region in order to provide reference to further improve the quality of postgraduate students. Fourty-six papers of Otolaryngology master degree thesis were reviewed at randomly in terms of types, subject selection ranges as well as statistical methods during 1998-2009 in Xinjiang region in order to analyze and explore its advantages and characteristics and suggest a solution for its disadvantages. In 46 degree thesis, nine of them are scientific dissertations accounting for 19.57%, 37 are clinical professional degree thesis, accounting for 80.43%. Five are Experimental research papers, 30 are clinical research papers, 10 are clinical and experimental research papers, 1 of them is experimental epidemiology research paper; in this study, the kinds of diseases including every subject of ENT, various statistical methods are involved; references are 37.46 in average, 19.55 of them are foreign literatures references in nearly 5 years are 13.57; four ethnic groups are exist in postgraduate students with high teaching professional level of tutors. The clinical research should be focused in order to further research on ENT common diseases, the application of advanced research methods, the full application of the latest literature, tutors with high-level, training of students of various nationalities, basic research needs to be innovative and should be focus the subject characteristics, to avoid excessive duplication of research.

Graduate Formation in Intellectual Property in Brazil: A Study Based on Academic Production of Thesis and Dissertations

Directory of Open Access Journals (Sweden)

Heitor de Paula Filho

2009-07-01

Full Text Available The aim of this paper is to present information on the graduate formation in Intellectual Property in Brazil based on academic production of thesis and dissertations. This study analyzed data from 278 documents indexed in Bank of Thesis of Capes. The results show that: 1 only in the last years started the formation of professionals at the master’s and doctorate degree levels being necessary efforts for learning and training in the area; 2 the formation of competences is much concentrated in the Southeast and South regions of the country and in the area of Law being necessary to correct these asymmetries; and 3 the principal focus of this academic production is related to intellectual property policy followed by patents.

PHoToNs–A parallel heterogeneous and threads oriented code for cosmological N-body simulation

Science.gov (United States)

Wang, Qiao; Cao, Zong-Yan; Gao, Liang; Chi, Xue-Bin; Meng, Chen; Wang, Jie; Wang, Long

2018-06-01

We introduce a new code for cosmological simulations, PHoToNs, which incorporates features for performing massive cosmological simulations on heterogeneous high performance computer (HPC) systems and threads oriented programming. PHoToNs adopts a hybrid scheme to compute gravitational force, with the conventional Particle-Mesh (PM) algorithm to compute the long-range force, the Tree algorithm to compute the short range force and the direct summation Particle-Particle (PP) algorithm to compute gravity from very close particles. A self-similar space filling a Peano-Hilbert curve is used to decompose the computing domain. Threads programming is advantageously used to more flexibly manage the domain communication, PM calculation and synchronization, as well as Dual Tree Traversal on the CPU+MIC platform. PHoToNs scales well and efficiency of the PP kernel achieves 68.6% of peak performance on MIC and 74.4% on CPU platforms. We also test the accuracy of the code against the much used Gadget-2 in the community and found excellent agreement.

A familiar Friend: The Impacts of the Master's Thesis over Four Formative Career Phases.

Science.gov (United States)

Hooley, Cole Douglas

2017-01-01

Over the course of my career, I have experienced the thesis in different ways. This reflection paper will relay my encounters with, what I am calling, thesis-objects (to borrow a concept from object relations). I encountered the thesis-objects at different phases of my professional development: when I was a student, a supervisor for Smith MSW students, a PhD applicant, and chair of the Alumni Thesis Award Committee. My relationship with each thesis-object has refined me and granted me new perspective and personal growth. When I was a student, the thesis was a coach helping me develop tools to answer important questions. When I was a supervisor, the thesis was a bridge-builder strengthening my relationships with supervisees. Then, when I was a PhD applicant, the thesis was a door-opener providing me means to access PhD opportunities. Now that I am a chair, the thesis is a teacher opening my eyes to new intellectual terrain and pressing social problems.

General methods for analyzing bounded proportion data

OpenAIRE

Hossain, Abu

2017-01-01

This thesis introduces two general classes of models for analyzing proportion response variable when the response variable Y can take values between zero and one, inclusive of zero and/or one. The models are inflated GAMLSS model and generalized Tobit GAMLSS model. The inflated GAMLSS model extends the flexibility of beta inflated models by allowing the distribution on (0,1) of the continuous component of the dependent variable to come from any explicit or transformed (i.e. logit or truncated...

The transport of 3H and 14C in phloem strands of Heracleum lanatum and polyester threads

International Nuclear Information System (INIS)

Hoddinott, J.; Gorham, P.R.

1976-01-01

Experiments are described which show a great similarity in the profiles of rapid movement of tritium after external application of 3 H 2 O to a small segment of a phloem strand of Heracleum lanatum and a water-soaked polyester thread. Efflux of rapidly transported tritium from phloem strands and polyester threads was also similar. No rapid movement of radioisotope from (U- 14 C)sucrose, (6,6'- 3 H)sucrose, or (6- 3 H)glucose along phloem strands was observed. A possible explanation for the rapid movement of tritium in terms of proton transfer is offered. It is concluded that the rapid movement of tritium in a phloem strand which occurs when 3 H 2 O is applied externally to a segment is an artifact and that no normal translocation is occurring. (author)

Effect of cocoon fluorescence, silkworm hybrid and gender on sericin content of Bombyx mori L. silk thread

Directory of Open Access Journals (Sweden)

M. Panayotov

2016-06-01

Full Text Available Abstract. The goal of the present study was to determine the influence of the ultraviolet fluorescence of cocoons, the hybrid, the sex and the interaction among them on the sericin content in silk threads. The study was performed with 3 di- and 2 tetra-cross silkmoth (Bombyx mori L. hybrids, differentiated in three groups – with violet, intermediate and yellow fluorescence of the cocoons. The examined factors had a significant effect (p≤0.001 on the sericin content. The highest sericin content was detected in the silk threads of the violet-fluorescent and the lowest – in the yellow-fluorescent group. The analysed di-hybrids were distinguished by better characteristics in terms of sericin content, compared to the tetra-hybrids, most obvious for the yellow-fluorescent fraction.

Health research priorities in medical thesis at National University of Piura, 2010-2014

Directory of Open Access Journals (Sweden)

Nelson Purizaca-Rosillo

2016-02-01

Full Text Available OBJETIVES To determine the frequency of thesis to obtain the medical degree at the NationalUniversity of Piura (UNP whose aim was framed within the Peru's nationaland/or Piura's regionalHRP from 201Oto 2014. MATERIAL AND METHODS A cross-sectionalstudy was conducted.All thesis to obtain the medicaldegree registered at the library of the UNP and the specialized library of the human medicine faculty from 2010 to 2014 were included.According the aim of the thesis,it was determinedif it was related toa nationalor regionalHRP.We searched through Google Scholar if the thesis that met witha HRP hadbeen published in a scientific joumal. RESULTS 150 thesis were found in the study period. Only 15 (10% thesis hadas the main objective a nationalHRP and 1 (0.6% a regionalHRP.Besides,none of the thesis had been published. CONCLUSIONS Thereis a low frequency of medicalthesis that were framed within a nationaland/or regionalHRP.

Artificial muscles from fishing line and sewing thread.

Science.gov (United States)

Haines, Carter S; Lima, Márcio D; Li, Na; Spinks, Geoffrey M; Foroughi, Javad; Madden, John D W; Kim, Shi Hyeong; Fang, Shaoli; Jung de Andrade, Mônica; Göktepe, Fatma; Göktepe, Özer; Mirvakili, Seyed M; Naficy, Sina; Lepró, Xavier; Oh, Jiyoung; Kozlov, Mikhail E; Kim, Seon Jeong; Xu, Xiuru; Swedlove, Benjamin J; Wallace, Gordon G; Baughman, Ray H

2014-02-21

The high cost of powerful, large-stroke, high-stress artificial muscles has combined with performance limitations such as low cycle life, hysteresis, and low efficiency to restrict applications. We demonstrated that inexpensive high-strength polymer fibers used for fishing line and sewing thread can be easily transformed by twist insertion to provide fast, scalable, nonhysteretic, long-life tensile and torsional muscles. Extreme twisting produces coiled muscles that can contract by 49%, lift loads over 100 times heavier than can human muscle of the same length and weight, and generate 5.3 kilowatts of mechanical work per kilogram of muscle weight, similar to that produced by a jet engine. Woven textiles that change porosity in response to temperature and actuating window shutters that could help conserve energy were also demonstrated. Large-stroke tensile actuation was theoretically and experimentally shown to result from torsional actuation.

A statistical analysis of Chinese traditional sports science master′s degree thesis

Directory of Open Access Journals (Sweden)

SHEN Wenjuan

2013-04-01

Full Text Available Through a statistical analysis of 367 sports science master′s degree thesis on Chinese traditional sport in the past five years,some conclusions can be drawn that the traditional national sports master's degree thesis should expand the theoretical depth; expand the scope of the study,in particular,focusing on some disappearing traditional national sports; regulate the types of research methods; strengthen the depth of data mining,correct thesis references. Thus can further clarify the laws of traditional sports graduate Thesis and provide references for postgraduate training.

The validation of the Supervision of Thesis Questionnaire (STQ).

Science.gov (United States)

Henricson, Maria; Fridlund, Bengt; Mårtensson, Jan; Hedberg, Berith

2018-06-01

The supervision process is characterized by differences between the supervisors' and the students' expectations before the start of writing a bachelor thesis as well as after its completion. A review of the literature did not reveal any scientifically tested questionnaire for evaluating nursing students' expectations of the supervision process when writing a bachelor thesis. The aim of the study was to determine the construct validity and internal consistency reliability of a questionnaire for measuring nursing students' expectations of the bachelor thesis supervision process. The study had a developmental and methodological design carried out in four steps including construct validity and internal consistency reliability statistical procedures: construction of the items, assessment of face validity, data collection and data analysis. This study was conducted at a university in southern Sweden, where students on the "Nursing student thesis, 15 ECTS" course were consecutively selected for participation. Of the 512 questionnaires distributed, 327 were returned, a response rate of 64%. Five factors with a total variance of 74% and good communalities, ≥0.64, were extracted from the 10-item STQ. The internal consistency of the 10 items was 0.68. The five factors were labelled: The nature of the supervision process, The supervisor's role as a coach, The students' progression to self-support, The interaction between students and supervisor and supervisor competence. A didactic, useful and secure questionnaire measuring nursing students' expectations of the bachelor thesis supervision process based on three main forms of supervision was created. Copyright © 2018 Elsevier Ltd. All rights reserved.

Motivation in medical students: a PhD thesis report

OpenAIRE

Kusurkar, Rashmi

2012-01-01

The aims of this thesis were to gather insights and investigate the factors influencing, outcomes and applications of medical students' motivation. This thesis consists of three literature reviews, four research papers and two application papers. Two research studies investigated the relationships of student motivation with study strategy, effort and academic performance through structural equation modelling and cluster analysis. The relationships of age, maturity, gender and educational back...

An Investigation of Generic Structures of Pakistani Doctoral Thesis Acknowledgements

Science.gov (United States)

Rofess, Sakander; Mahmood, Muhammad Asim

2015-01-01

This paper investigates Pakistani doctoral thesis acknowledgements from genre analysis perspective. A corpus of 235 PhD thesis acknowledgements written in English was taken from Pakistani doctoral theses collected from eight different disciplines. HEC Research Repository of Pakistan was used as a data sources. The theses written by Pakistani…

Thread-Like CMOS Logic Circuits Enabled by Reel-Processed Single-Walled Carbon Nanotube Transistors via Selective Doping.

Science.gov (United States)

Heo, Jae Sang; Kim, Taehoon; Ban, Seok-Gyu; Kim, Daesik; Lee, Jun Ho; Jur, Jesse S; Kim, Myung-Gil; Kim, Yong-Hoon; Hong, Yongtaek; Park, Sung Kyu

2017-08-01

The realization of large-area electronics with full integration of 1D thread-like devices may open up a new era for ultraflexible and human adaptable electronic systems because of their potential advantages in demonstrating scalable complex circuitry by a simply integrated weaving technology. More importantly, the thread-like fiber electronic devices can be achieved using a simple reel-to-reel process, which is strongly required for low-cost and scalable manufacturing technology. Here, high-performance reel-processed complementary metal-oxide-semiconductor (CMOS) integrated circuits are reported on 1D fiber substrates by using selectively chemical-doped single-walled carbon nanotube (SWCNT) transistors. With the introduction of selective n-type doping and a nonrelief photochemical patterning process, p- and n-type SWCNT transistors are successfully implemented on cylindrical fiber substrates under air ambient, enabling high-performance and reliable thread-like CMOS inverter circuits. In addition, it is noteworthy that the optimized reel-coating process can facilitate improvement in the arrangement of SWCNTs, building uniformly well-aligned SWCNT channels, and enhancement of the electrical performance of the devices. The p- and n-type SWCNT transistors exhibit field-effect mobility of 4.03 and 2.15 cm 2 V -1 s -1 , respectively, with relatively narrow distribution. Moreover, the SWCNT CMOS inverter circuits demonstrate a gain of 6.76 and relatively good dynamic operation at a supply voltage of 5.0 V. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entropy and Computation: The Landauer-Bennett Thesis Reexamined

Directory of Open Access Journals (Sweden)

Orly Shenker

2013-08-01

Full Text Available The so-called Landauer-Bennett thesis says that logically irreversible operations (physically implemented such as erasure necessarily involve dissipation by at least kln2 per bit of lost information. We identify the physical conditions that are necessary and sufficient for erasure and show that the thesis does not follow from the principles of classical mechanics. In particular, we show that even if one assumes that information processing is constrained by the laws of classical mechanics, it need not be constrained by the Second Law of thermodynamics.

General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software

Directory of Open Access Journals (Sweden)

D. S. Blinov

2017-01-01

Full Text Available One of the most important trends in development of machine engineering is to improve load capacity of mechanisms, assemblies and parts without increasing their overall dimensions and weight. This is also relevant to the most promising items so far, i.e. orbital roller drives (ORD, which are the rotational-to-progressive motion converters widely used in vehicles. The previously published article suggested increasing a load capacity (by about 15% through reducing a thread turn section angle of the threaded ORD components and change of the radius of roller thread turn section outline. Due to such ORD modification, a number of the most critical ORD parameters are to be changed thereby demanding further research. Further, the article published suggests a method considering the abovementioned changes to calculate the dimensions of ORD main components and their tolerance ranges.Though this method being not complete as the increment of ORD center-to-center spacing in relation to its rated value, required for assembly, is unknown; and to determine the ORD center-to-center spacing increment, outer diameters of the roller and screw threads are to be known. Hence, these two methods are interconnected.This article presents the numerical calculation method, mathematical support and method to determine the increment of ORD center-to-center spacing and initial contact point of the mating roller and screw thread turns. Due to considerable scope of calculations, the method was turned into the software.Similar calculation methods and techniques were developed to a particular case, where the thread turn section angle of the threaded components was of 90°, and the roller thread turn section outline was a circular arc centered to the roller axis. Hence the developed numerical calculation method, mathematical support and technique refer to the general case which is to determine the ORD center-to-center spacing increment and initial contact point of the mating roller

The efficacy of short (6 mm) dental implants with a novel thread design.

Science.gov (United States)

Bechara, Soheil; Nimčenko, Tatjana; Kubilius, Ričardas

2017-01-01

To assess efficacy of short (6 mm) implants with a novel macrostructure and thread design placed in a compromised bone situations of edentulous posterior regions of maxilla (3-4 mm of bone height under sinus floor) as compared to results of clinical situations treated with simultaneous maxillary sinus grafting and placement of long (≥10 mm) implants of the same company. Clinical cases of conducted clinical study. Patients with compromised bone height in edentulous posterior regions of maxilla were randomly divided into two groups. Short (6mm length) implant treatment conducted in the test group and simultaneous sinus lift with standard length implant placement treatment in the control group. In general implant stability quotient (ISQ) and marginal bone level (MBL) changes values in both groups were comparable. However, significant negative correlation was found between implant's diameter and MBL changes. Implant's length has little if none impact on initial implant anchorage, especially in greatly compromised residual bone situations. Results have confirmed that implant initial stability mainly depends on implant's macro-design and further its development on implant's micro-design: namely, implant diameter rather than length, tapered shape and improved thread design determines primarily acquired mechanical anchorage, while bioactive surface treatment ensures development of biological stability.

78 FR 58520 - Extruded Rubber Thread From Malaysia; Notice of Amended Final Results of Antidumping Duty...

Science.gov (United States)

2013-09-24

... Malaysia; Notice of Amended Final Results of Antidumping Duty Administrative Review AGENCY: Import... from Malaysia.\\1\\ The period of review (POR) is October 1, 1995, through September 30, 1996. \\1\\ See Extruded Rubber Thread From Malaysia; Final Results of Antidumping Duty Administrative Review, 63 FR 12752...

Motivation in medical students: a PhD thesis report.

Science.gov (United States)

Kusurkar, Rashmi

2012-08-01

The aims of this thesis were to gather insights and investigate the factors influencing, outcomes and applications of medical students' motivation. This thesis consists of three literature reviews, four research papers and two application papers. Two research studies investigated the relationships of student motivation with study strategy, effort and academic performance through structural equation modelling and cluster analysis. The relationships of age, maturity, gender and educational background with motivation were investigated through multiple regression analysis. The results of this thesis were 1. Developments in medical education appear to have undervalued student motivation. 2. Motivation is an independent variable in medical education; intrinsic motivation is significantly associated with deep study strategy, high study effort and good academic performance. 3. Motivation is a dependent variable in medical education and is significantly affected by age, maturity, gender, educational background; intrinsic motivation is enhanced by providing students with autonomy, feedback and emotional support. 4. Strength of motivation for medical school can be reliably measured by Strength of Motivation for Medical School questionnaire. The conclusion of this thesis was that it is important to give consideration to motivation in medical education because intrinsic motivation leads to better learning and performance and it can be enhanced through giving students autonomy in learning, feedback about competence and emotional support.

Implementation of the ATLAS trigger within the ATLAS Multi­Threaded Software Framework AthenaMT

CERN Document Server

Wynne, Benjamin; The ATLAS collaboration

2016-01-01

We present an implementation of the ATLAS High Level Trigger that provides parallel execution of trigger algorithms within the ATLAS multi­threaded software framework, AthenaMT. This development will enable the ATLAS High Level Trigger to meet future challenges due to the evolution of computing hardware and upgrades of the Large Hadron Collider, LHC, and ATLAS Detector. During the LHC data­taking period starting in 2021, luminosity will reach up to three times the original design value. Luminosity will increase further, to up to 7.5 times the design value, in 2026 following LHC and ATLAS upgrades. This includes an upgrade of the ATLAS trigger architecture that will result in an increase in the High Level Trigger input rate by a factor of 4 to 10 compared to the current maximum rate of 100 kHz. The current ATLAS multiprocess framework, AthenaMP, manages a number of processes that process events independently, executing algorithms sequentially in each process. AthenaMT will provide a fully multi­threaded env...

Support for NUMA hardware in HelenOS

OpenAIRE

Horký, Vojtěch

2011-01-01

The goal of this master thesis is to extend HelenOS operating system with the support for ccNUMA hardware. The text of the thesis contains a brief introduction to ccNUMA hardware, an overview of NUMA features and relevant features of HelenOS (memory management, scheduling, etc.). The thesis analyses various design decisions of the implementation of NUMA support -- introducing the hardware topology into the kernel data structures, propagating this information to user space, thread affinity to ...

A familiar Friend: The Impacts of the Master’s Thesis over Four Formative Career Phases

Science.gov (United States)

2018-01-01

Over the course of my career, I have experienced the thesis in different ways. This reflection paper will relay my encounters with, what I am calling, thesis-objects (to borrow a concept from object relations). I encountered the thesis-objects at different phases of my professional development: when I was a student, a supervisor for Smith MSW students, a PhD applicant, and chair of the Alumni Thesis Award Committee. My relationship with each thesis-object has refined me and granted me new perspective and personal growth. When I was a student, the thesis was a coach helping me develop tools to answer important questions. When I was a supervisor, the thesis was a bridge-builder strengthening my relationships with supervisees. Then, when I was a PhD applicant, the thesis was a door-opener providing me means to access PhD opportunities. Now that I am a chair, the thesis is a teacher opening my eyes to new intellectual terrain and pressing social problems. PMID:29479118

[The importance of thesis in specialization courses in Medicine].

Science.gov (United States)

Ramiro-H, Manuel; Cruz-A, Enrique

2016-01-01

The development of a thesis goes far beyond a mere compliance with the methodological requirements and evidence that students have sufficient knowledge that the profession demands. A thesis is usually the first academic and research work that students publish, it is also the result of commitment and dedication to the field of medicine in which they will be developing, which reflects motivations and interests, as well as their reflection to a specific problem.

How to Write a Bachelor Thesis in (APA) Style

OpenAIRE

Hirnstein, Marco

2016-01-01

Bachelor students at the Faculty of Psychology in Bergen are required to write their thesis according to the guidelines of scientific writing by the American Psychological Association (APA). These guidelines provide help with structuring the thesis, describing research methods, reporting findings, referencing, and using a clear scientific writing style. Despite its relevance, teaching the APA guidelines has been considered somewhat boring by both students and teaching staff – largely due to t...

New compilers speed up applications for Intel-based systems; Intel Compilers pave the way for Intel's Hyper-threading technology

CERN Multimedia

2002-01-01

"Intel Corporation today introduced updated tools to help software developers optimize applications for Intel's expanding family of architectures with key innovations such as Intel's Hyper Threading Technology (1 page).

Honors Thesis Preparation: Evidence of the Benefits of Structured Curricula

Science.gov (United States)

Engel, Steven

2016-01-01

A recent study of honors curricula across the nation indicates that 75.6% of honors programs and colleges at four-year institutions have thesis or capstone requirements (Savage and Cognard-Black). In addition to institutions with thesis requirements, many more also have the option for students to complete theses. For example, an earlier study…

Characteristics of undergraduate medical thesis of a Peruvian public university

Directory of Open Access Journals (Sweden)

Betty Castro Maldonado

2015-09-01

Full Text Available Introduction: The undergraduate thesis rather than a requirement to graduate, are a way of doing research. Previous studies show a thesis published between 2.7% to 17.6% in indexed journals. Objective: Describe the characteristics of the undergraduate thesis of the Faculty of a medical school. Bibliometric study. 221 theses were reviewed, collecting: Year, number of authors, advisers, and references, study population, and national priorities for health research. A search was performed on Google Scholar to assess publication. Descriptive statistics were used. Results: Being lower production in the years 2008-2010 was observed. 91.6% had one advisor, 76% descriptive, 82.8% in hospital population, and 62.4% of adults. Theses displayed between 2010-2014 72.9% did not correspond to any national health research priority. Only 6.8% was based on literature of the last five years. Only 9 (4.1% were published in a scientific journal indexed. Conclusions: The undergraduate thesis were characterized as descriptive, hospital, adults, literature based on outdated and not in line with the national priorities for health research. The publication is low.

Alumni Views about Educational Administration, Supervision, Planning and Economics Non-Thesis Master’s Program: The Case of Gaziantep University

Directory of Open Access Journals (Sweden)

Murat BAĞLIBEL

2014-12-01

Full Text Available The aim of this study is to determine alumni views about Educational Administration, Supervision, Planning and Economics Non-Thesis Master’s Program which is carried out in Gaziantep University. The working group of the study consists of 16 participants graduated from Educational Administration, Supervision, Planning and Economics Non-Thesis Master’s Program of Gaziantep University until June, 2013. It is a case study of qualitative research designs. In order to collect research data, semistructured interview method is used. Research data are analyzed with descriptive and content analysis methods in accordance with qualitative research approach. At the end of the study, developing oneself in terms of occupational, personal and social relationships emerged as the reasons of choosing the program for education. The participants specify that the program met their expectations to a large extent. Regulating the program fee, starting distance education program, increasing the number of practical lessons of the program and Ministry of National Education’s giving more importance to the alumni of this Non-Thesis Master’s Program are among the proposals of the study.

Radiation and scattering from cylindrically conformal printed antennas. Ph.D. Thesis Final Report

Science.gov (United States)

Kempel, Leo C.; Volakis, John L.

1994-01-01

Microstrip patch antennas offer considerable advantages in terms of weight, aerodynamic drag, cost, flexibility, and observables over more conventional protruding antennas. These flat patch antennas were first proposed over thirty years ago by Deschamps in the United States and Gutton and Baisinot in France. Such antennas have been analyzed and developed for planar as well as curved platforms. However, the methods used in these designs employ gross approximations, suffer from extreme computational burden, or require expensive physical experiments. The goal of this thesis is to develop accurate and efficient numerical modeling techniques which represent actual antenna structures mounted on curved surfaces with a high degree of fidelity. In this thesis, the finite element method is extended to cavity-backed conformal antenna arrays embedded in a circular, metallic, infinite cylinder. Both the boundary integral and absorbing boundary mesh closure conditions will be used for terminating the mesh. These two approaches will be contrasted and used to study the scattering and radiation behavior of several useful antenna configurations. An important feature of this study will be to examine the effect of curvature and cavity size on the scattering and radiation properties of wraparound conformal antenna arrays.

The Pleating of History: Weaving the Threads of Nationhood

Directory of Open Access Journals (Sweden)

Martin Ball

2013-08-01

Full Text Available As any etymologist knows, the word ‘text’ is derived from the past participle of the Latin verb texere, to weave. Text is therefore something that is ‘woven’. It’s a persuasive metaphor, to imagine writing in terms of the warp and weft of ideas and words, of narrative threads woven together to become a piece of fabric. The idea of history as fabric brings together a whole different set of tropes, not just of weaving, but of the very materiality of fabric. Does the fabric have a nap, or a pattern? Is it cut with the grain, or on the bias? What of its folds, its seams? All these qualities of fabric have application in the interpretation of history, and some of these images are already familiar in historical discourse.

The helical tomotherapy thread effect

International Nuclear Information System (INIS)

Kissick, M.W.; Fenwick, J.; James, J.A.; Jeraj, R.; Kapatoes, J.M.; Keller, H.; Mackie, T.R.; Olivera, G.; Soisson, E.T.

2005-01-01

Inherent to helical tomotherapy is a dose variation pattern that manifests as a 'ripple' (peak-to-trough relative to the average). This ripple is the result of helical beam junctioning, completely unique to helical tomotherapy. Pitch is defined as in helical CT, the couch travel distance for a complete gantry rotation relative to the axial beam width at the axis of rotation. Without scattering or beam divergence, an analytical posing of the problem as a simple integral predicts minima near a pitch of 1/n where n is an integer. A convolution-superposition dose calculator (TomoTherapy, Inc.) included all the physics needed to explore the ripple magnitude versus pitch and beam width. The results of the dose calculator and some benchmark measurements demonstrate that the ripple has sharp minima near p=0.86(1/n). The 0.86 factor is empirical and caused by a beam junctioning of the off-axis dose profiles which differ from the axial profiles as well as a long scatter tail of the profiles at depth. For very strong intensity modulation, the 0.86 factor may vary. The authors propose choosing particular minima pitches or using a second delivery that starts 180 deg off-phase from the first to reduce these ripples: 'Double threading'. For current typical pitches and beam widths, however, this effect is small and not clinically important for most situations. Certain extremely large field or high pitch cases, however, may benefit from mitigation of this effect

Enjoy writing your science thesis or dissertation! a step-by-step guide to planning and writing a thesis or dissertation for undergraduate and graduate science students

CERN Document Server

Fisher, Elizabeth

2014-01-01

This book is a step by step illustrated guide to planning and writing dissertations and theses for undergraduate and graduate science students. Topics covered include advice on writing each section of a thesis as well as general discussions on collecting and organizing references, keeping records, presenting data, interacting with a supervisor and avoiding academic misconduct. Recommendations about how to use word processors and other software packages effectively are included, as well as advice on the use of other resources. A concise summary of important points of English grammar is given, along with appendices listing frequently confused words and wordy phrases to avoid. Further appendices are provided, including one on Si units. The aim is to provide an easy-to-read guide that gives students practical advice about all aspects of writing a science thesis or dissertation, starting from writing a thesis plan and finishing with the viva and corrections to the thesis.

Geographical distribution and risk assessment of persistent organic pollutants in golden threads (Nemipterus virgatus) from the northern South China Sea.

Science.gov (United States)

Hao, Qing; Sun, Yu-Xin; Xu, Xiang-Rong; Yao, Zi-Wei; Wang, You-Shao; Zhang, Zai-Wang; Luo, Xiao-Jun; Mai, Bi-Xian

2015-10-01

Fish are often used as good bioindicators to monitor the occurrence of persistent organic pollutants (POPs) on different scales in recent years. Forty-five golden threads (Nemipterus virgatus) were collected from six sampling sites in the northern South China Sea (SCS) to investigate the geographical distribution of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane and its metabolites (DDTs). Concentrations of PBDEs, PCBs, and DDTs ranged from 1.3-36.0, 2.3-76.5, 8.3-228 ng/g lipid weight, respectively. The highest PBDEs and DDTs concentrations were found in golden threads from Shantou, owing to the intensive electronic waste recycling activities and rapid development of agriculture. Samples from Haikou had the highest levels of PCBs, probably due to the existence of many shipbuilding yards in the past years. The concentrations of PBDEs and PCBs were found in a decreasing trend from east to west and from north to south, while DDTs concentrations had no obvious trend in the distribution. PCBs were the most prevalent contaminants in Xiamen and Yangjiang, while DDTs were the dominant compounds at the other four sampling sites. Different profiles of POPs at each sampling site may attribute to different pollution sources in the northern SCS. Ratios of (DDD + DDE)/DDTs in golden threads suggested the probability of fresh input of DDT in the northern SCS. The estimated daily intakes of PBDEs, PCBs and DDTs were 0.030-0.069, 0.167-0.258 and 0.105-1.88 ng/kg/day, respectively, which were significantly lower than the acceptable daily intake, suggesting that consumption of golden threads from the northern SCS would not subject the residents in the coastal areas of SCS to significant health risk.

Double Threaded Screw Fixation for Bilateral Stress Fracture of the Medial Malleolus

Directory of Open Access Journals (Sweden)

Ryo Kanto

2014-01-01

Full Text Available An 18-year-old college basketball player presented with continued ankle pain. A radiographic examination showed bilateral medial malleolus stress fractures. Considering the prolonged history and refractory nature of this injury, surgery was adopted as a treatment option. At surgery, the fracture site was percutaneously fixed using two cannulated double threaded screws. Surgery for each side was sequentially performed two months apart. Prompt bony healing was attained after surgery, and the patient could return to his previous sports level six months after the first surgery without subsequent recurrence.

Assessing the competences associated with a nursing Bachelor thesis by means of rubrics.

Science.gov (United States)

Llaurado-Serra, M; Rodríguez, E; Gallart, A; Fuster, P; Monforte-Royo, C; De Juan, M Á

2018-07-01

Writing a Bachelor thesis is the last step in obtaining a university degree. The thesis may be job- or research-orientated, but it must demonstrate certain degree-level competences. Rubrics are a useful way of unifying the assessment criteria. To design a system of rubrics for assessing the competences associated with the Bachelor thesis of a nursing degree, to examine the system's reliability and validity and to analyse results in relation to the final thesis mark. Cross-sectional and psychometric study conducted between 2012 and 2014. Nursing degree at a Spanish university. Twelve tutors who designed the system of rubrics. Students (n = 76) who wrote their Bachelor thesis during the 2013-2014 academic year. After deciding which aspects would be assessed, who would assess them and when, the tutors developed seven rubrics (drafting process, assessment of the written thesis by the supervisor and by a panel, student self-assessment, peer assessment, tutor evaluation of the peer assessment and panel assessment of the viva). We analysed the reliability (inter-rater and internal consistency) and validity (convergent and discriminant) of the rubrics, and also the relationship between the competences assessed and the final thesis mark. All the rubrics had internal consistency coefficients >0.80. The rubric for oral communication skills (viva) yielded inter-rater reliability of 0.95. Factor analysis indicated a unidimensional structure for all but one of the rubrics, the exception being the rubric for peer assessment, which had a two-factor structure. The main competences associated with a good quality Bachelor thesis were written communication skills and the ability to work independently. The assessment system based on seven rubrics is shown to be valid and reliable. Writing a Bachelor thesis requires a range of degree-level competences and it offers nursing students the opportunity to develop their evidence-based practice skills. Copyright © 2018 Elsevier Ltd. All

Zilsel's Thesis, Maritime Culture, and Iberian Science in Early Modern Europe.

Science.gov (United States)

Leitão, Henrique; Sánchez, Antonio

2017-01-01

Zilsel's thesis on the artisanal origins of modern science remains one of the most original proposals about the emergence of scientific modernity. We propose to inspect the scientific developments in Iberia in the early modern period using Zilsel's ideas as a guideline. Our purpose is to show that his ideas illuminate the situation in Iberia but also that the Iberian case is a remarkable illustration of Zilsel's thesis. Furthermore, we argue that Zilsel's thesis is essentially a sociological explanation that cannot be applied to isolated cases; its use implies global events that involve extended societies over large periods of time.

Obraz sociální sítě Facebook v českých tištěných médiích v letech 2007-2009

OpenAIRE

Špičák, Jakub

2012-01-01

A purpose of this thesis is to offer a view into media reflection of social network Facebook. In its "theoretical" part, the thesis offers structured sets of information about this phenomenon, such as its creation, history, current, and possible future uses. It also refers to usage of Facebook for broadcasting of "citizen journalism", as well as to possible threads of using this social site, mainly connected to privacy and personal data leaching. In its "practical" part, the thesis analysis s...

Medical Speciality Thesis: Contribution to a Controversial Issue with a Research Study

Directory of Open Access Journals (Sweden)

Mehmet Bilgin SAYDAM

2015-12-01

Full Text Available The aquisition of clinical and practical skills is the main target during the speciality training program. On the other hand, acquisition of skills in reading and interpreting scientific knowledge are also important training targets in order to develop and update clinical practice constantly. The process of thesis preparation during the speciality training provides an important opportunity to capture the skills in interpreting scientific knowledge. In Turkey, thesis writing has been obligatory for completion of speciality training for several years. Recently, there has been a discussion about the obligation for clinicians to write a thesis, especially those who are undertaking specialist training in education and research hospitals. The aim of this study was to evaluate the pros and cons of thesis writing during speciality training using a questionnaire that was sent to specialists. This descriptive and analytical study was conducted as an e-questionnaire between December, 2013, and May, 2014. A likert scale consisted of 18 questions has been prepared in accordance with this study. Th e questionnaire was sent to 1536 physicians. 328 of the questionnaires have been included in the study by evaluating the responses obtained from 345 of the participants. Th e response rate was 23%. Th e Cronbach alpha coeff icient was 0.77. Out of the 328 questionnaires, 11.9 %were from Basic Medical Sciences, 57%from Internal Medical Sciences, and 30.2%from Surgical Medical Sciences. Among the respondents, the percentage of specialists, assistant professors, associate professors and professors were 20.7%, 8.2%, 13.7%, and 57.3%, respectively. Independent of specialty field and aff iliation, the respondents concluded that the conduction and thesis writing contributed to their scientific career in spite of the common problems they encountered regarding adequate time for preparation. Furthermore, they concluded that thesis writing had a positive eff ect in the

What Makes a Senior Thesis Good?

Science.gov (United States)

Trosset, Carol; Weisler, Steven

2018-01-01

Kuh (2008) describes the capstone as a "culminating experience" students undertake close to graduation often involving "a project of some sort that integrates and applies what they've learned" (p. 11). The senior thesis is one form of the capstone in which students write an analytic paper under faculty supervision, typically as…

LANDSAT menhaden and thread herring resources investigation. [Gulf of Mexico

Science.gov (United States)

Kemmerer, A. J. (Principal Investigator); Brucks, J. T.; Butler, J. A.; Faller, K. H.; Holley, H. J.; Leming, T. D.; Savastano, K. J.; Vanselous, T. M.

1977-01-01

The author has identified the following significant results. The relationship between the distribution of menhaden and selected oceanographic parameters (water color, turbidity, and possibly chlorophyll concentrations) was established. Similar relationships for thread herring were not established nor were relationships relating to the abundance of either species. Use of aircraft and LANDSAT remote sensing instruments to measure or infer a set of basic oceanographic parameters was evaluated. Parameters which could be accurately inferred included surface water temperature, salinity, and color. Water turbidity (Secchi disk) was evaluated as marginally inferrable from the LANDSAT MSS data and chlorophyll-a concentrations as less than marginal. These evaluations considered the parameters only as experienced in the two test areas using available sensors and statistical techniques.

Finding the Genesis for a Thesis

Science.gov (United States)

Caroll, Joyce Armstrong

2013-01-01

This article describes a prewriting heuristics strategy that can help students find the genesis of their thesis. The 3 functions of the heuristic procedure are that it aids in retrieving relevant information stored in the mind; draws attention to important information that can be further researched or accessed; and prepares the mind for the…

High Resolution Topography Analysis on Threading Edge Dislocations in 4H-SiC Epilayers

International Nuclear Information System (INIS)

Kamata, I.; Nagano, M.; Tsuchida, H.; Chen, Y.; Dudley, M.

2009-01-01

Threading edge dislocations (TEDs) in a 4H-SiC epitaxial layer are investigated using high-resolution synchrotron topography. Six types of TED image are confirmed to correspond to the Burgers vector directions by a comparison of computer simulated images and observed topography images in crystal boundaries. Using a mapping method, a wide spatial distribution of the six types of TED is examined in a quarter section of a 2-inch wafer.

Thread-level parallelization and optimization of NWChem for the Intel MIC architecture

Energy Technology Data Exchange (ETDEWEB)

Shan, Hongzhang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); de Jong, Wibe [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-01-01

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments. In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant e ort was required to safely and efeciently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI+OpenMP hybrid implementations attain up to 65× better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6× better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.

Thread-Level Parallelization and Optimization of NWChem for the Intel MIC Architecture

Energy Technology Data Exchange (ETDEWEB)

Shan, Hongzhang; Williams, Samuel; Jong, Wibe de; Oliker, Leonid

2014-10-10

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments. In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in tt native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant effort was required to safely and efficiently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI OpenMP hybrid implementations attain up to 65x better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6x better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.

Web Annotation and Threaded Forum: How Did Learners Use the Two Environments in an Online Discussion?

Science.gov (United States)

Sun, Yanyan; Gao, Fei

2014-01-01

Web annotation is a Web 2.0 technology that allows learners to work collaboratively on web pages or electronic documents. This study explored the use of Web annotation as an online discussion tool by comparing it to a traditional threaded discussion forum. Ten graduate students participated in the study. Participants had access to both a Web…

[Vagotonía. The medical thesis of Salvador Zubirán].

Science.gov (United States)

Delgado, Guillermo; Estañol-Vidal, Bruno

2012-01-01

Salvador Zubirán submitted his thesis for his MD degree in 1923. This thesis falls within the context of the new Mexican physiological medicine and denotes the visionary character of its author. Zubirán appears here as the introducer in Mexico of the physiopharmacological approach in autonomic nervous system disorders.

The effect of threading dislocations on optical absorption and electron scattering in strongly mismatched heteroepitaxial III-V compound semiconductors on silicon

CERN Document Server

Peiner, E; Wehmann, H H

2002-01-01

The effect of threading dislocations on the optical and electrical properties of InP and GaAs heteroepitaxial layers on (001) silicon was investigated. Charged deep states act as scattering centres for electrons, thus affecting the electron mobility at low temperatures. The electric field arising from charged dislocations causes enhanced optical absorption at wavelengths near the fundamental absorption edge. The mean charge of the threading dislocations in GaAs/Si was found to be considerably higher than that for InP/Si. A model is described relating this effect to a regular arrangement of alpha-type 60 deg. dislocations at extended twin defects which were observed in InP/Si but were absent in GaAs/Si.

The Radical Thread - Liberalism and the rise of Labour in Scotland 1886 - 1924

Directory of Open Access Journals (Sweden)

Catriona MacDonald

2011-09-01

Full Text Available PreambleThis paper is a revised version of a lecture delivered to the Liberal Democrat History Meeting at the Scottish Liberal Democrat Conference in 2009. It was the subject of a report in the Journal of Liberal History (Winter 2009-2010, pp. 32-38. See also Catriona M.M. Macdonald, The Radical Thread: Political Change in Scotland, Paisley 1885-1924 (John Donald, 2000.Contemporary resonances are seductive when reflecting on the historic and recent past of the Liberal Party in Britain and i...

Dissimilar metal study on C44300 tube to AA7075 -T651 tube plate with and without thread by FWTPET process

Energy Technology Data Exchange (ETDEWEB)

Radhakrishnan, E.; Kumaraswamidhas, L. A. [Indian Institute of Technology (ISM), Jharkhand (India); Muruganandam, D. [Sri Sairam Engineering College, Tamil Nadu (India); Kumaran, S. Senthil [RVS School of Engineering and Technology, Tamilnadu, (India)

2017-05-15

Friction welding has vital industrial role in fabricating automobiles, aerospace, ship building, heat exchangers using similar, dissimilar and bi-metal of ferrous and non-ferrous metals at mass production level. In this study, admiralty brass C44300 tube and aluminium alloy AA7075 -T651, 6 mm thick tube plate were identified as base metals. Different joint surface area profile of with and without thread of different pitch values was chosen to study the mechanical properties and micro structures of these two base metals. 0.1 mm clearance was maintained between the AA7075-T651 tube plate and C44300 tube outer diameter to make friction welding. Taguchi’s L16 orthogonal array techniques were adopted for identifying the most significant ranking process parameters. Analysis of variance (ANOVA) has been used to analyze the input parameter contribution in terms of percentage. Genetic algorithm (GA) was used to access the suitable input parameter value to obtain effective joint strength in terms of hardness, compressive strength and microstructure formation in the interface of the joint. A Compression test (CT) was conducted to evaluate the level of compressive strength of the joint. Threaded profile pair with higher pitch value proved high compressive strength over unthreaded pair. Micro structure for base metal C44300 tube and AA7075-T651 tube plate, Heat affected zone (HAZ) and Weld zone (WZ) of the joint has been studied. Hardness of base metals, HAZ and WZ was measured by micro Vickers hardness tester and the observation shows that hardness at joint interface has been found to be higher in all pairs.

Modeling self-organization of novel organic materials

Science.gov (United States)

Sayar, Mehmet

In this thesis, the structural organization of oligomeric multi-block molecules is analyzed by computational analysis of coarse-grained models. These molecules form nanostructures with different dimensionalities, and the nanostructured nature of these materials leads to novel structural properties at different length scales. Previously, a number of oligomeric triblock rodcoil molecules have been shown to self-organize into mushroom shaped noncentrosymmetric nanostructures. Interestingly, thin films of these molecules contain polar domains and a finite macroscopic polarization. However, the fully polarized state is not the equilibrium state. In the first chapter, by solving a model with dipolar and Ising-like short range interactions, we show that polar domains are stable in films composed of aggregates as opposed to isolated molecules. Unlike classical molecular systems, these nanoaggregates have large intralayer spacings (a ≈ 6 nm), leading to a reduction in the repulsive dipolar interactions that oppose polar order within layers. This enables the formation of a striped pattern with polar domains of alternating directions. The energies of the possible structures at zero temperature are computed exactly and results of Monte Carlo simulations are provided at non-zero temperatures. In the second chapter, the macroscopic polarization of such nanostructured films is analyzed in the presence of a short range surface interaction. The surface interaction leads to a periodic domain structure where the balance between the up and down domains is broken, and therefore films of finite thickness have a net macroscopic polarization. The polarization per unit volume is a function of film thickness and strength of the surface interaction. Finally, in chapter three, self-organization of organic molecules into a network of one dimensional objects is analyzed. Multi-block organic dendron rodcoil molecules were found to self-organize into supramolecular nanoribbons (threads) and

Student Engagement, Ideological Contest and Elective Affinity: The Zepke Thesis Reviewed

Science.gov (United States)

Trowler, Paul

2015-01-01

This paper takes up issues raised in two articles by Nick Zepke and portrayed here as "the Zepke thesis". This thesis argues that the literature on, interest in and practices around student engagement in higher education have an elective affinity with neo-liberal ideology. At one level this paper counters many of the assertions that…

Thesis by Publication in Education: An Autoethnographic Perspective for Educational Researchers

Science.gov (United States)

Merga, Margaret K.

2015-01-01

Despite its growing popularity, the thesis by publication is a less conventional format for doctoral dissertations in the field of education. The author successfully undertook a thesis by publication in education from 2012, to submission in 2014. This paper draws on both the literature in the field and the experiences of the author through an…

An Examination of the Neural Unreliability Thesis of Autism.

Science.gov (United States)

Butler, John S; Molholm, Sophie; Andrade, Gizely N; Foxe, John J

2017-01-01

An emerging neuropathological theory of Autism, referred to here as "the neural unreliability thesis," proposes greater variability in moment-to-moment cortical representation of environmental events, such that the system shows general instability in its impulse response function. Leading evidence for this thesis derives from functional neuroimaging, a methodology ill-suited for detailed assessment of sensory transmission dynamics occurring at the millisecond scale. Electrophysiological assessments of this thesis, however, are sparse and unconvincing. We conducted detailed examination of visual and somatosensory evoked activity using high-density electrical mapping in individuals with autism (N = 20) and precisely matched neurotypical controls (N = 20), recording large numbers of trials that allowed for exhaustive time-frequency analyses at the single-trial level. Measures of intertrial coherence and event-related spectral perturbation revealed no convincing evidence for an unreliability account of sensory responsivity in autism. Indeed, results point to robust, highly reproducible response functions marked for their exceedingly close correspondence to those in neurotypical controls. © The Author 2016. Published by Oxford University Press.

TEFL Graduate Supervisees' Views of Their Supervisors' Supervisory Styles and Satisfaction with Thesis Supervision

Science.gov (United States)

Gedamu, Abate Demissie

2018-01-01

Thesis supervisor supervisory styles play central roles in enhancing timely and quality completion of thesis works. To this effect, this study aimed at exploring TEFL graduate supervisees' perception of their thesis supervisors' supervisory style(s), the supervisees' level of satisfaction with thesis supervision, and the association between…

EASYTRAC Project: Work package 6.4 Reversal technique to calibrate gear and thread standards

DEFF Research Database (Denmark)

Carmignato, Simone; De Chiffre, Leonardo; Larsen, Erik

This report was produced as a part of the project EASYTRAC, an EU project under the programme Competitive and Sustainable Growth: Contract No. G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines (CM...... (PTB) - Germany and Tampere University of Technology (TUT) - Finland. The present report describes feasibility and experimental results of a reversal and substitute element technique application for thread calibration on CMMs....

The Extended Mind Thesis and Mechanistic Explanations

DEFF Research Database (Denmark)

Fazekas, Peter

2013-01-01

The Extended Mind Thesis (EMT) is traditionally formulated against the bedrock of functionalism, and ongoing debates are typically bogged down with questions concerning the exact relationship between EMT and different versions of functionalism. In this paper, I offer a novel ally for EMT: the new...

Presentation master thesis at EAPRIL 2015 Conference

NARCIS (Netherlands)

Iris Sutherland; Richard Kragten; Zac Woolfitt

2015-01-01

Three graduates of the Inholland Master Leren en Innoveren (Zac Woolfitt, Iris Sutherland and Richard Kragten) each presented their master thesis in an interactive 'flipped' session which involved providing content in advance via a video for those attending the session. The session was well attended

Towards a framework for threaded inference in rule-based systems

Directory of Open Access Journals (Sweden)

Luis Casillas Santillan

2013-11-01

Full Text Available nformation and communication technologies have shown a significant advance and fast pace in their performance and pervasiveness. Knowledge has become a significant asset for organizations, which need to deal with large amounts of data and information to produce valuable knowledge. Dealing with knowledge is turning the axis for organizations in the new economy. One of the choices to gather the goal of knowledge managing is the use of rule-based systems. This kind of approach is the new chance for expert-systems’ technology. Modern languages and cheap computing allow the implementation of concurrent systems for dealing huge volumes of information in organizations. The present work is aimed at proposing the use of contemporary programming elements, as easy to exploit threading, when implementing rule-based treatment over huge data volumes.

Experimental Investigation of Average Heat-Transfer and Friction Coefficients for Air Flowing in Circular Tubes Having Square-Thread-Type Roughness

Science.gov (United States)

Sams, E. W.

1952-01-01

An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well

The impact of ScO{sub x}N{sub y} interlayers on unintentional doping and threading dislocations in GaN

Energy Technology Data Exchange (ETDEWEB)

Zhu, T; Moram, M A; Rao, D V Sridhara; Li, H; Kappers, M J; Oliver, R A, E-mail: tz234@cam.ac.u [Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom)

2010-02-01

To reduce the threading dislocation density in (0001) GaN grown on c-plane sapphire, a series of samples have been grown using scandium oxynitride (ScO{sub x}N{sub y}) interlayers (ILs) on AlN-on-sapphire templates. Scanning capacitance microscopy (SCM) has been employed to investigate the unintentional doping in GaN with varying ScO{sub x}N{sub y} IL thicknesses. The use of ScO{sub x}N{sub y} ILs decreases the threading dislocation density. An unintentionally n-doped layer has been identified by SCM close to the GaN/ScO{sub x}N{sub y} interface. The average width of this conductive layer has been quantified and found to increase as the ScO{sub x}N{sub y} IL thickness increases up to 13 nm.

Can a pairwise contact potential stabilize native protein folds against decoys obtained by threading?

Science.gov (United States)

Vendruscolo, M; Najmanovich, R; Domany, E

2000-02-01

We present a method to derive contact energy parameters from large sets of proteins. The basic requirement on which our method is based is that for each protein in the database the native contact map has lower energy than all its decoy conformations that are obtained by threading. Only when this condition is satisfied one can use the proposed energy function for fold identification. Such a set of parameters can be found (by perceptron learning) if Mp, the number of proteins in the database, is not too large. Other aspects that influence the existence of such a solution are the exact definition of contact and the value of the critical distance Rc, below which two residues are considered to be in contact. Another important novel feature of our approach is its ability to determine whether an energy function of some suitable proposed form can or cannot be parameterized in a way that satisfies our basic requirement. As a demonstration of this, we determine the region in the (Rc, Mp) plane in which the problem is solvable, i.e., we can find a set of contact parameters that stabilize simultaneously all the native conformations. We show that for large enough databases the contact approximation to the energy cannot stabilize all the native folds even against the decoys obtained by gapless threading.

Action Learning in Undergraduate Engineering Thesis Supervision

Science.gov (United States)

Stappenbelt, Brad

2017-01-01

In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative investigated the influence of the action learning environment on student approaches…

Testing for 'threads' and leucocyte esterase in first-void urine to exclude the diagnosis of non-specific urethritis in asymptomatic men.

Science.gov (United States)

Pallawela, Sanjeeva N S; Sonnex, Christopher; Burdett, Julia; Cooper, Dawn; Nethercott, Katrina; Thomas, Catherina M; Goon, Peter; Webb, Hayley; Carne, Christopher

2014-07-01

Recent evidence suggests that asymptomatic nonspecific urethritis (NSU), which is not routinely tested for, is a clinically significant pathology.The aim of this pilot study was to determine if testing for urinary threads, leucocyte esterase (LE) or both in asymptomatic men is a good screening tool for NSU. Of the126 asymptomatic men, 8% met microscopic criteria for the diagnosis of NSU. The positive predictive value for NSU was 71% (95% confidence interval (CI): 29.3-95.5%) and the negative predictive value was 96% (95% CI: 92.8-99.5%). The absence of threads and negative LE makes urethritis highly unlikely, making urinary chlamydia (Chlamydia trachomatis) and gonorrhoea (Neisseria gonorrhoeae) testing sufficient. Incidental findings of further pathology occurred in 7%.

Integrity evaluation for stud female threads on pressure vessel according to ASME code using FEM

International Nuclear Information System (INIS)

Kim, Moon Young; Chung, Nam Yong

2003-01-01

The extension of design life among power plants is increasingly becoming a world-wide trend. Kori no.1 unit in Korea is operating two cycle. It has two man-ways for tube inspection in a steam generator which is one of the important components in a nuclear power plant. Especially, stud bolts for man-way cover have damaged by disassembly and assembly several times and degradation for bolt materials for long term operation. It should be evaluated and compared by ASME code criteria for integrity evaluation. Integrity evaluation criteria which has been made by the manufacturer is not applied on the stud bolts of nuclear pressure vessels directly because it is controlled by the yield stress of ASME code. It can apply evaluation criteria through FEM analysis to damaged female threads and to evaluated safety for helical-coil method which is used according to code case-N-496-1. From analysis results, we found that it is the same results between stress intensity which got from FEM analysis on damaged female threads over 10% by manufacture integrity criteria and 2/3 yield strength criteria on ASME code. It was also confirmed that the helical-coil repair method would be safe

Generic accelerated sequence alignment in SeqAn using vectorization and multi-threading.

Science.gov (United States)

Rahn, René; Budach, Stefan; Costanza, Pascal; Ehrhardt, Marcel; Hancox, Jonny; Reinert, Knut

2018-05-03

Pairwise sequence alignment is undoubtedly a central tool in many bioinformatics analyses. In this paper, we present a generically accelerated module for pairwise sequence alignments applicable for a broad range of applications. In our module, we unified the standard dynamic programming kernel used for pairwise sequence alignments and extended it with a generalized inter-sequence vectorization layout, such that many alignments can be computed simultaneously by exploiting SIMD (Single Instruction Multiple Data) instructions of modern processors. We then extended the module by adding two layers of thread-level parallelization, where we a) distribute many independent alignments on multiple threads and b) inherently parallelize a single alignment computation using a work stealing approach producing a dynamic wavefront progressing along the minor diagonal. We evaluated our alignment vectorization and parallelization on different processors, including the newest Intel® Xeon® (Skylake) and Intel® Xeon Phi™ (KNL) processors, and use cases. The instruction set AVX512-BW (Byte and Word), available on Skylake processors, can genuinely improve the performance of vectorized alignments. We could run single alignments 1600 times faster on the Xeon Phi™ and 1400 times faster on the Xeon® than executing them with our previous sequential alignment module. The module is programmed in C++ using the SeqAn (Reinert et al., 2017) library and distributed with version 2.4. under the BSD license. We support SSE4, AVX2, AVX512 instructions and included UME::SIMD, a SIMD-instruction wrapper library, to extend our module for further instruction sets. We thoroughly test all alignment components with all major C++ compilers on various platforms. rene.rahn@fu-berlin.de.

The Analysis of Electrical Energy Consumption of the Impact Screwdriver During Assembly of Fixed Threaded Joints

Science.gov (United States)

Grinevich, I.; Nikishin, Vl.; Mozga, N.; Laitans, M.

2017-06-01

The paper deals with the possibilities of reducing the consumption of electrical energy of the impact screwdriver during the assembly of fixed threaded joints. The recommendations related to a decrease in electrical energy consumption would allow reducing product costs but so far there have been no such recommendations from the producers of the tool as to the effective operating regimes of the impact screwdrivers in relation to electrical energy consumption and necessary tightening moment of the nut. The aim of the study is to find out the economical operating mode of the electrical impact screwdriver when assembling fixed threaded joints. By varying the set speed of the rotor head and working time of the impact mechanism, there is an opportunity to determine electrical energy consumption of the tool for the given tightening moment. The results of the experiment show that at the same tightening moment obtained the electrical energy consumption of the impact screwdriver is less at a higher starting set speed of the rotor head but shorter operating time of the impact mechanism than at a lower speed of the rotor head and longer operating time of the impact mechanism.

[Medical degree earned with a thesis in medical schools of Lima, 2011: characteristics, motivations and perceptions].

Science.gov (United States)

Mejia, Christian R; Inga-Berrospi, Fiorella; Mayta-Tristán, Percy

2014-01-01

We surveyed physicians who obtained their medical degree with a thesis in 2011 from the seven medical schools in Lima to know the characteristics of the degree by thesis process, as well as participants’ motivations and perceptions of that process. We included 98 students who did a thesis (87% of total); 99% conducted observational thesis, 30% did so in groups of three. The main motivation was that it was good for their curriculum vitae (94%). At the university where the thesis is compulsory, the process began with the choice of topic and adviser. Perceived “greatest” and “least” difficulty in the process was the completion of administrative procedures (53%) and selection of their advisor (11%), respectively. Administrative timeliness and processes should be reviewed so as not to impede the completion of thesis, since the new University Act requires the completion of a thesis to graduate.

Inspirational catalogue of Master Thesis proposals 2014

DEFF Research Database (Denmark)

This catalog presents different topics for master thesis projects. It is important to emphasize that the project descriptions only serves as an inspiration and that you always can discuss with the potential supervisors the specific contents of a project. If you have an idea for a project which...

Feynman's thesis: A new approach to quantum theory

International Nuclear Information System (INIS)

Das, Ashok

2007-01-01

It is not usual for someone to write a book on someone else's Ph.D. thesis, but then Feynman was not a usual physicist. He was without doubt one of the most original physicists of the twentieth century, who has strongly influenced the developments in quantum field theory through his many ingenious contributions. Path integral approach to quantum theories is one such contribution which pervades almost all areas of physics. What is astonishing is that he developed this idea as a graduate student for his Ph.D. thesis which has been printed, for the first time, in the present book along with two other related articles. The early developments in quantum theory, by Heisenberg and Schroedinger, were based on the Hamiltonian formulation, where one starts with the Hamiltonian description of a classical system and then promotes the classical observables to noncommuting quantum operators. However, Dirac had already stressed in an article in 1932 (this article is also reproduced in the present book) that the Lagrangian is more fundamental than the Hamiltonian, at least from the point of view of relativistic invariance and he wondered how the Lagrangian may enter into the quantum description. He had developed this idea through his 'transformation matrix' theory and had even hinted on how the action of the classical theory may enter such a description. However, although the brief paper by Dirac contained the basic essential ideas, it did not fully develop the idea of a Lagrangian description in detail in the functional language. Feynman, on the other hand, was interested in the electromagnetic interactions of the electron from a completely different point of view rooted in a theory involving action-at-a-distance. His theory (along with John Wheeler) did not have a Hamiltonian description and, in order to quantize such a theory, he needed an alternative formulation of quantum mechanics. When the article by Dirac was brought to his attention, he immediately realized what he was

Highly Stretchable Non-volatile Nylon Thread Memory

Science.gov (United States)

Kang, Ting-Kuo

2016-04-01

Integration of electronic elements into textiles, to afford e-textiles, can provide an ideal platform for the development of lightweight, thin, flexible, and stretchable e-textiles. This approach will enable us to meet the demands of the rapidly growing market of wearable-electronics on arbitrary non-conventional substrates. However the actual integration of the e-textiles that undergo mechanical deformations during both assembly and daily wear or satisfy the requirements of the low-end applications, remains a challenge. Resistive memory elements can also be fabricated onto a nylon thread (NT) for e-textile applications. In this study, a simple dip-and-dry process using graphene-PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) ink is proposed for the fabrication of a highly stretchable non-volatile NT memory. The NT memory appears to have typical write-once-read-many-times characteristics. The results show that an ON/OFF ratio of approximately 103 is maintained for a retention time of 106 s. Furthermore, a highly stretchable strain and a long-term digital-storage capability of the ON-OFF-ON states are demonstrated in the NT memory. The actual integration of the knitted NT memories into textiles will enable new design possibilities for low-cost and large-area e-textile memory applications.

A Response to Shelby Gilbert's "A Study of Ogbu and Simons' Thesis"

Science.gov (United States)

Hawkins, C. Matthew

2009-01-01

This article responds to Shelby Gilbert's "A Study of Ogbu and Simon's Thesis." The author begins by saying that he thinks that this study of examining Ogbu and Simons' thesis (to investigate school performance of Black immigrant and non-immigrant students in the United States) makes a thought-provoking contribution to overall discussions…

PhD Thesis: Functional Textiles in Hospital Interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe Emil

The PhD thesis explores the possibilities and design qualities of using functional textiles in the interior of hospital environments, and is the result of a three-year collaboration between Aalborg University, Department of Civil Engineering, and VIA University College, VIA Design. The thesis...... years, knowledge on the use of interior materials and textiles are still rather limited. Contemporary hospital design has been widely criticised of being too institutional and clinical, and one of the main reasons for this experience may be related to the use of ‘cold’, hard-surfaced materials...... of plastic, vinyl and steel. These materials also dominate the new hospitals, designed and constructed these years, and despite the increased focus on the design concept healing architecture, the rational requirements of ef cient cleaning and maintenance still seems to direct the interior design of hospital...

Toxin-Antitoxin Battle in Bacteria

DEFF Research Database (Denmark)

Cataudella, Ilaria

This PhD thesis consists of three research projects revolving around the common thread of investigation of the properties and biological functions of Toxin-Antitoxin loci. Toxin-Antitoxin (TA) loci are transcriptionally regulated via an auto-inhibition mechanism called conditional cooperativity, ...

Writing a Structured Abstract for the Thesis

Science.gov (United States)

Hartley, James

2010-01-01

This article presents the author's suggestions on how to improve thesis abstracts. The author describes two books on writing abstracts: (1) "Creating Effective Conference Abstracts and Posters in Biomedicine: 500 tips for Success" (Fraser, Fuller & Hutber, 2009), a compendium of clear advice--a must book to have in one's hand as one prepares a…

TCP Packet Trace Analysis. M.S. Thesis

Science.gov (United States)

Shepard, Timothy J.

1991-01-01

Examination of a trace of packets collected from the network is often the only method available for diagnosing protocol performance problems in computer networks. This thesis explores the use of packet traces to diagnose performance problems of the transport protocol TCP. Unfortunately, manual examination of these traces can be so tedious that effective analysis is not possible. The primary contribution of this thesis is a graphical method of displaying the packet trace which greatly reduce, the tediousness of examining a packet trace. The graphical method is demonstrated by the examination of some packet traces of typical TCP connections. The performance of two different implementations of TCP sending data across a particular network path is compared. Traces many thousands of packets long are used to demonstrate how effectively the graphical method simplifies examination of long complicated traces. In the comparison of the two TCP implementations, the burstiness of the TCP transmitter appeared to be related to the achieved throughput. A method of quantifying this burstiness is presented and its possible relevance to understanding the performance of TCP is discussed.

Complexation of imidazopyridine-based cations with a 24-crown-8 ether host: [2]pseudorotaxane and partially threaded structures.

Science.gov (United States)

Moreno-Olivares, Surisadai I; Cervantes, Ruy; Tiburcio, Jorge

2013-11-01

A new series of linear molecules derived from 1,2-bis(imidazopyridin-2-yl)ethane can fully or partially penetrate the cavity of the dibenzo-24-crown-8 macrocycle to produce a new family of host-guest complexes. Protonation or alkylation of the nitrogen atoms on the pyridine rings led to an increase in the guest total positive charge up to 4+ and simultaneously generated two new recognition sites (pyridinium motifs) that are in competition with the 1,2-bis(benzimidazole)ethane motif for the crown ether. The relative position of the pyridine ring and the chemical nature of the N-substituent determined the preferred motif and the host-guest complex geometry: (i) for linear guests with relatively bulky groups (i.e., a benzyl substituent), the 1,2-bis(benzimidazole)ethane motif is favored, leading to a fully threaded complex with a [2]pseudorotaxane geometry; (ii) for small substituents, such as -H and -CH3 groups, regardless of the guest shape, the pyridinium motifs are preferred, leading to external partially threaded complexes in a 2:1 host to guest stoichiometry.

The Size Spectrum as Tool for Analyzing Marine Plastic Pollution

KAUST Repository

Martí , E.; Duarte, Carlos M.; Có zar, A.

2016-01-01

to abundance, color (129 tons), polymer type, and category (rigid fragments, films, threads, foam, pellets, and microbeads). Using GPSS database, we show for instance the dependence of plastic composition on the item size, with high diversity of categories

Analysis of micro-failure behaviors in artificial muscles based on fishing line and sewing thread

Science.gov (United States)

Xu, J. B.; Cheng, K. F.; Tu, S. L.; He, X. M.; Ma, C.; Jin, Y. Z.; Kang, X. N.; Sun, T.; Zhang, Y.

2017-06-01

The aim of the present study was to discuss a new and effective method for testing artificial muscles based on micro-failure behaviors analysis. Thermo-mechanical actuators based on fishing line and sewing thread, also, the capability of responding to ambient temperature variations producing a large amount of shrinkage ratio of a resulting variation in longitudinal length. The minimum micro-failure value is 0.02μm and the maximum value is 1.72μm with nylon twist pattern. The discovery of an innovative effective testing of artificial muscles based on polymeric fibers specimens on micro-failure, rupture, slippage, etc. This research finds out a micro-failure behavior analysis of thermo-mechanical actuators based on fishing line and sewing thread. The specimens show large deformations when heated together with warping performance in terms of shrinkage of energy and densities. With the purpose of providing useful analysis data for the further technology applications, we attempt micrometre-sized artificial muscles which were also tested was readily accessible and also can be applied to other polymeric fibers. Effective use of this technique achievement relies on rotate speed, temperature and tensile direction. The results of the tensile testing experiments were outstanding with respect to some important issues related to the response of micro-structure, twisted polymeric fibers and shrinkage ratio.

Students' anxiety in a senior thesis course.

Science.gov (United States)

Wood, M R; Palm, L J

2000-06-01

The State-Trait Anxiety Inventory was administered on Weeks 8, 12, and 15 of a semester to 16 students enrolled in a senior thesis course. State anxiety scores were elevated when oral presentations began and declined following the presentations. Trait anxiety scores remained constant across test administrations. The influence of situational variables on students' anxiety was discussed.

The Thesis, the Pendulum and the Battlefield

Science.gov (United States)

Ameri, Amir

2015-01-01

The debate over the design thesis is often entangled in the dialectics of the practical and the theoretical. Whether the argument is waged and weighted in favour of a practical emphasis or a theoretical emphasis, or more insidious, a judicious balance between the two, what is inevitably assumed in the debate is the possibility of drawing and/or…

Understanding the up, back, and forward-component in master's thesis supervision with adaptivity

NARCIS (Netherlands)

de Kleijn, Renske A M; Bronkhorst, Larike H.; Meijer, Paulien C.; Pilot, Albert; Brekelmans, Mieke

2016-01-01

Despite the importance of goals in educational theories, goals in master's thesis projects are rarely investigated. Therefore, this study explores how goals play a role in master's thesis supervision in terms of: defining the goals (up-component); locating where the student stands in relation to the

Analysis of Journal Citations in Thesis/Dissertations of Post ...

African Journals Online (AJOL)

Analysis of Journal Citations in Thesis/Dissertations of Post Graduates of the Department of Political Science, University of Calabar, Nigeria and Their Availability in the University Library: A Re-Visitation.

Analyzing socio-economic impacts of tourism : Case of Lumbini region- Nepal

OpenAIRE

K.C., Shambhu; Gewali, Jhabindra

2014-01-01

The first objective of this Thesis is to identify, select, and analyze the socio- economic impacts of faith tourism in Lumbini region. The second objective is to present the impacts in context of changing business environment. And the last objective is to develop strategies for economic progress in a society. In this research work previous reports, theses, literatures and reviews were studied to get an idea about the socio-economic impacts of faith tourism in Lumbini region. In addition,...

On the Strategies of Graduation Thesis Writing Teaching of Translation Major Undergraduates Based on Eco-Translatology

Science.gov (United States)

Lin, Wang

2017-01-01

Graduation thesis is an indispensible procedure for each undergraduate, which is crucial for successful graduation, employment, further study and even further development. However, due to most undergraduates' ignorance of academic writing and the deficiency of current thesis writing course, thesis writing ability can hardly be enhanced and…

Understanding human quality judgment in assessing online forum contents for thread retrieval purpose

Science.gov (United States)

Ismail, Zuriati; Salim, Naomie; Huspi, Sharin Hazlin

2017-10-01

Compared to traditional materials or journals, user-generated contents are not peer-reviewed. Lack of quality control and the explosive growth of web contents make the task of finding quality information on the web especially critical. The existence of new facilities for producing web contents such as forum makes this issue more significant. This study focuses on online forums threads or discussion, where the forums contain valuable human-generated information in a form of discussions. Due to the unique structure of the online forum pages, special techniques are required to organize and search for information in these forums. Quality biased retrieval is a retrieval approach that search for relevant document and prioritized higher quality documents. Despite major concern of quality content and recent development of quality biased retrieval, there is an urgent need to understand how quality content is being judged, for retrieval and performance evaluation purposes. Furthermore, even though there are various studies on the quality of information, there is no standard framework that has been established. The primary aim of this paper is to contribute to the understanding of human quality judgment in assessing online forum contents. The foundation of this study is to compare and evaluate different frameworks (for quality biased retrieval and information quality). This led to the finding that many quality dimensions are redundant and some dimensions are understood differently between different studies. We conducted a survey on crowdsourcing community to measure the importance of each quality dimensions found in various frameworks. Accuracy and ease of understanding are among top important dimensions while threads popularity and contents manipulability are among least important dimensions. This finding is beneficial in evaluating contents of online forum.

An empirical thesis of service recovery in the package holiday industry

OpenAIRE

By, Angelica; Kaspersson, Elisabeth

2018-01-01

Purpose: The aim of this thesis is to gain an understanding what it is within the vacation offering that makes certain customers dissatisfied with a service recovery effort. Design/methodology/approach: The basis of the thesis is a qualitative approach since we want to gain an understanding about what it is in the service failure and service recovery that make customers dissatisfied. Although, a quantitative approach will be used as a supplement to the qualitative approach in order to seek pa...

Multi-threaded ATLAS simulation on Intel Knights Landing processors

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00014247; The ATLAS collaboration; Calafiura, Paolo; Leggett, Charles; Tsulaia, Vakhtang; Dotti, Andrea

2017-01-01

The Knights Landing (KNL) release of the Intel Many Integrated Core (MIC) Xeon Phi line of processors is a potential game changer for HEP computing. With 72 cores and deep vector registers, the KNL cards promise significant performance benefits for highly-parallel, compute-heavy applications. Cori, the newest supercomputer at the National Energy Research Scientific Computing Center (NERSC), was delivered to its users in two phases with the first phase online at the end of 2015 and the second phase now online at the end of 2016. Cori Phase 2 is based on the KNL architecture and contains over 9000 compute nodes with 96GB DDR4 memory. ATLAS simulation with the multithreaded Athena Framework (AthenaMT) is a good potential use-case for the KNL architecture and supercomputers like Cori. ATLAS simulation jobs have a high ratio of CPU computation to disk I/O and have been shown to scale well in multi-threading and across many nodes. In this paper we will give an overview of the ATLAS simulation application with detai...

Multi-threaded ATLAS Simulation on Intel Knights Landing Processors

CERN Document Server

Farrell, Steven; The ATLAS collaboration; Calafiura, Paolo; Leggett, Charles

2016-01-01

The Knights Landing (KNL) release of the Intel Many Integrated Core (MIC) Xeon Phi line of processors is a potential game changer for HEP computing. With 72 cores and deep vector registers, the KNL cards promise significant performance benefits for highly-parallel, compute-heavy applications. Cori, the newest supercomputer at the National Energy Research Scientific Computing Center (NERSC), will be delivered to its users in two phases with the first phase online now and the second phase expected in mid-2016. Cori Phase 2 will be based on the KNL architecture and will contain over 9000 compute nodes with 96GB DDR4 memory. ATLAS simulation with the multithreaded Athena Framework (AthenaMT) is a great use-case for the KNL architecture and supercomputers like Cori. Simulation jobs have a high ratio of CPU computation to disk I/O and have been shown to scale well in multi-threading and across many nodes. In this presentation we will give an overview of the ATLAS simulation application with details on its multi-thr...

Five essays in property valuation

OpenAIRE

Yang, Zan

2000-01-01

This doctoral thesis consists of five self-contained essayspresented to the Faculty Board of the Royal Institute ofTechnology. Property valuation is a central issue that forms acommon thread in the analysis in these essays. In the thesisproperty is considered in a mixed asset context in an attemptto build a bridge between valuation, property investment andfinancial theory. The object of the thesis is to value propertyfor finance, sales and purchases and investment. Theinvestigation of the the...

The relation between executing of thesis policies and medical student's theses quality in type medical faculties of Iran

Directory of Open Access Journals (Sweden)

Kolahi A.A

2004-10-01

Full Text Available Background: Medical students' thesis is equal to six units, which is mandatory for graduation. The purpose of preparing thesis is to familiarize students with research process, methodology, and scientific report writing skill. Purpose: The objective of this study is to determine the relation between executing of thesis policies and medical students' theses quality in type I medical faculties of Iran Methods: To perform this study first, we randomly chose 36 (Total sample=396 medical students' theses in each 11 medical faculties, which completed in 1998-99 academic year. The original theses were evaluated by using a questionnaire. Second, for evaluation of operationalization of thesis policies we use four criteria including, the presence of performance regulations, the proposals approving process, final approving course and presence of a defence session to evaluate thesis in the same medical faculty. Results: In medical faculties that thesis policies were completed, the score of theses was high. In contrast medical faculties with weak policies had low students’ theses scores. Conclusion: Thesis policies are considered as one of the ways to improve the quality of thesis. it is advise at the same time as we should be plan to provide the effective factors for improvement quality of thesis consider strongly the regulations related thesis should be considerate. Keywords: MEDICAL STUDENTS, THESES, REGULATION, and SCORES

Pre-Service Teachers' Beliefs about the Roles of Thesis Supervisors: A Case Study

Science.gov (United States)

Tapia Carlín, Rebeca Elena

2013-01-01

Trainee beliefs about the roles of thesis supervisors can exert an important influence on timely and successful completion of theses. This research article explores pre-service teacher beliefs about the roles of thesis supervisors through the analysis of their learning diaries. The aim of this study is to identify ways to improve supervisory…

Scalable Approach to Highly Efficient and Rapid Capacitive Deionization with CNT-Thread As Electrodes.

Science.gov (United States)

Moronshing, Maku; Subramaniam, Chandramouli

2017-11-22

A scalable route to highly efficient purification of water through capacitive deionization (CDI) is reported using CNT-thread as electrodes. Electro-sorption capacity (q e ) of 139 mg g -1 and average salt-adsorption rate (ASAR) of 2.78 mg g -1 min -1 achieved here is the highest among all known electrode materials and nonmembrane techniques, indicating efficient and rapid deionization. Such exceptional performance is achieved with feedstock concentrations (≤1000 ppm) where conventional techniques such as reverse osmosis and electrodialysis prove ineffective. Further, both cations (Na + , K + , Mg 2+ , and Ca 2+ ) and anions (Cl - , SO 4 2- and NO 3 - ) are removed with equally high efficiency (∼80%). Synergism between electrical conductivity (∼25 S cm -1 ), high specific surface area (∼900 m 2 g -1 ), porosity (0.7 nm, 3 nm) and hydrophilicity (contact angle ∼25°) in CNT-thread electrode enable superior contact with water, rapid formation of extensive electrical double layer and consequently efficient deionization. The tunable capacitance of the device (0.4-120 mF) and its high specific capacitance (∼27.2 F g -1 ) enable exceptional performance across a wide range of saline concentrations (50-1000 ppm). Facile regeneration of the electrode and reusability of the device is achieved for several cycles. The device demonstrated can desalinate water as it trickles down its surface because of gravity, thereby eliminating the requirement of any water pumping system. Finally, its portable adaptability is demonstrated by operating the device with an AA battery.

Understanding the Up, Back, and Forward-Component in Master's Thesis Supervision with Adaptivity

Science.gov (United States)

de Kleijn, Renske A. M.; Bronkhorst, Larike H.; Meijer, Paulien C.; Pilot, Albert; Brekelmans, Mieke

2016-01-01

Despite the importance of goals in educational theories, goals in master's thesis projects are rarely investigated. Therefore, this study explores how goals play a role in master's thesis supervision in terms of: defining the goals (up-component); locating where the student stands in relation to the goals (back-component); and how the student can…

Fixed Full Arches Supported by Tapered Implants with Knife-Edge Thread Design and Nanostructured, Calcium-Incorporated Surface: A Short-Term Prospective Clinical Study

Directory of Open Access Journals (Sweden)

Soheil Bechara

2017-01-01

Full Text Available Purpose. To evaluate implant survival, peri-implant bone loss, and complications affecting fixed full-arch (FFA restorations supported by implants with a knife-edge thread design and nanostructured, calcium-incorporated surface. Methods. Between January 2013 and December 2015, all patients referred for implant-supported FFA restorations were considered for enrollment in this study. All patients received implants with a knife-edge thread design and nanostructured calcium-incorporated surface (Anyridge®, Megagen, South Korea were restored with FFA restorations and enrolled in a recall program. The final outcomes were implant survival, peri-implant bone loss, biologic/prosthetic complications, and “complication-free” survival of restorations. Results. Twenty-four patients were selected. Overall, 215 implants were inserted (130 maxilla, 85 mandible, 144 in extraction sockets and 71 in healed ridges. Thirty-six FFAs were delivered (21 maxilla, 15 mandible: 27 were immediately loaded and 9 were conventionally loaded. The follow-up ranged from 1 to 3 years. Two fixtures failed, yielding an implant survival rate of 95.9% (patient-based. A few complications were registered, for a “complication-free” survival of restorations of 88.9%. Conclusions. FFA restorations supported by implants with a knife-edge thread design and nanostructured, calcium-incorporated surface are successful in the short term, with high survival and low complication rates; long-term studies are needed to confirm these outcomes.

7 CFR 3402.6 - Overview of the special international study and/or thesis/dissertation research travel allowance.

Science.gov (United States)

2010-01-01

... thesis/dissertation research travel allowance. 3402.6 Section 3402.6 Agriculture Regulations of the... GRANTS PROGRAM Program Description § 3402.6 Overview of the special international study and/or thesis... special international study or thesis/dissertation research travel allowance, the Project Director must...

synthesis and charact catalyst for the production o thesis

African Journals Online (AJOL)

userpc

THESIS AND CHARACTERIZATION OF SOLID HETEROGENEOUS. R THE PRODUCTION OF ... r ratio, 2wt% catalyst loading, 80oC reaction temperature and talyst maintained ... The analysis was carried out on a Shimadzu model XRD6000 ...

The Topological Primacy Thesis: Genetic and Didactic Aspects.

Science.gov (United States)

Schipper, Wilhelm

1983-01-01

Several critical questions concerning the topological primacy thesis were raised in an extensive literature survey (SE 531 428). Three points related to this criticism are discussed and reinforced, including a reexamination of Laurendeau and Pinard's data (showing that they do not support the hypothesis of topological primacy in children's…

Mapping monomeric threading to protein-protein structure prediction.

Science.gov (United States)

Guerler, Aysam; Govindarajoo, Brandon; Zhang, Yang

2013-03-25

The key step of template-based protein-protein structure prediction is the recognition of complexes from experimental structure libraries that have similar quaternary fold. Maintaining two monomer and dimer structure libraries is however laborious, and inappropriate library construction can degrade template recognition coverage. We propose a novel strategy SPRING to identify complexes by mapping monomeric threading alignments to protein-protein interactions based on the original oligomer entries in the PDB, which does not rely on library construction and increases the efficiency and quality of complex template recognitions. SPRING is tested on 1838 nonhomologous protein complexes which can recognize correct quaternary template structures with a TM score >0.5 in 1115 cases after excluding homologous proteins. The average TM score of the first model is 60% and 17% higher than that by HHsearch and COTH, respectively, while the number of targets with an interface RMSD benchmark proteins. Although the relative performance of SPRING and ZDOCK depends on the level of homology filters, a combination of the two methods can result in a significantly higher model quality than ZDOCK at all homology thresholds. These data demonstrate a new efficient approach to quaternary structure recognition that is ready to use for genome-scale modeling of protein-protein interactions due to the high speed and accuracy.

The Success of Thread-embedding Therapy in Generating Hair Re-growth in Mice Points to Its Possibly Having a Similar Effect in Humans

Directory of Open Access Journals (Sweden)

Hyun Jong Shin

2015-12-01

Full Text Available Objectives: Recently, thread-embedding therapy (TET has been widely applied in Korean medicine for cosmetic purposes such as reducing skin wrinkles. An inserted thread was reported to have induced continuous stimulation, followed by support for connective tissue regeneration. However, the potential role of TET in hairgrowth has not yet been reported. Methods: We designed this study to evaluate whether TET has a hair-growth-promoting effect. C57 black 6 (C57BL/6 mice were divided into three groups: normal saline-treated, minoxidil-treated, and thread-embedded groups. Normal saline or 5% minoxidil was topically sprayed on the dorsal skin of the mice once a day for 16 days. Medical threads were embedded into the dorsal skin of the mice in a single application. Hair growth activity was evaluated by using dermoscopic and microscopic observations. Sections of the dorsal skin were stained with hematoxylin and eosin. Expressions of bromodeoxyuridine (BrdU, proliferating cell nuclear antigen (PCNA, fibroblast growth factor-7 (FGF-7, and fibroblast growth factor-5 (FGF-5 were detected by using immunohistochemical staining. A reverse transcription-polymerase chain reaction (RT-PCR analysis was adopted to measure the messenger RNA (mRNA expressions of FGF-7 and FGF-5. Results: TET enhanced anagen development in the hair follicles of C57BL/6 mice. The expressions of BrdU and PCNA, both of which imply active cellular proliferation, were increased by using TET. Moreover, TET increased the expression of FGF-7, an anagen-inducing growth factor, while decreasing the expression of FGF-5, an anagen-cessation growth factor, both at the protein and the mRNA levels. Conclusion: TET enhanced hair re-growth in C57BL/6 mice. TET regulated the expressions of anagen-associated growth factors and activated the proliferation of hair follicular cells in depilated skin lesions. Considering its long-lasting effect, TET may be a good alternative therapeutic for the treatment of

基于DICache的混合线索解释执行技术%A DICache-Based Hybrid Threaded Interpretation Technique

Institute of Scientific and Technical Information of China (English)

陈微; 王志英; 陈顼颢; 沈立; 陆洪毅; 肖侬

2012-01-01

Interpretation-based instruction set emulation provides a solution to the binary compatibility problem. The organization of the interpretation process has great impact on the performance of an interpreter. Centralized interpretation is inefficient while the traditional threaded interpretation is not suitable for interpreting the CISC Instruction Set Architecture (ISA) because of the complicated instruction decoding process. We propose a DICache-based hybrid interpretation technique. DICache can dynamically predecode the source instruction and convert them into an intermediate form. The DICache access code is appended at the end of each interpreter routine, which enables the threaded interpretation for CISC ISA. We implement an interpreter which interprets the IA-32 instructions on VLIW. We conduct some benchmarks from SPEC INT 2000 to evaluate the performance of the novel threaded interpretation method. It is demonstrated that DICache-based hybrid threaded interpretation can significantly improve the performance of an interpreter.%由解释执行实现的指令集仿真是解决二进制兼容问题的有效手段.解释执行各步骤的组织方式对解释器性能有着重要影响.集中方式效率较低,而效率较高的线索方式由于译码过程过于复杂而无法用于CISC指令集的解释执行.本文提出了一种基于DICache的混合线索解释执行技术,DICache实现一种高效的硬件动态预译码,将源指令转换为一种中间表示,在解释例程中对DICache快速访问实现对CISC指令集的线索解释执行.本文在一个源为IA-32、目标为VLIW的解释器上,采用SPEC INT2000中的测试程序对基于DICache的混合线索解释执行技术进行评估.结果表明该方法可以显著提高解释器的性能.

Z-2 Threaded Insert Design and Testing

Science.gov (United States)

Ross, Amy; Rhodes, Richard; Jones, Robert J.; Graziosi, David; Ferl, Jinny; Sweeny, Mitch; Scarborough, Stephen

2016-01-01

NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement was to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. During initial assembly, cracking sounds were heard followed by the lifting of one of the blind inserts out of its hole when the screws were torqued. A failure investigation was initiated to understand the mechanism of the failure. Ultimately, it was determined that the pre-tension caused by torqueing the fasteners is a much larger force than induced from the pressure loads of the suit which was not considered in the insert design. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper summarizes the failure investigation that was performed to identify the root cause of the suit failure and details how the insert design was modified to resist a higher pull out tension.

Action learning in undergraduate engineering thesis supervision

OpenAIRE

Stappenbelt, Brad

2017-01-01

In the present action learning implementation, twelve action learning sets were conducted over eight years. The action learning sets consisted of students involved in undergraduate engineering research thesis work. The concurrent study accompanying this initiative investigated the influence of the action learning environment on student approaches to learning and any accompanying academic, learning and personal benefits realised. The influence of preferred learning styles on set function and s...

Master's Thesis Projects: Student Perceptions of Supervisor Feedback

Science.gov (United States)

de Kleijn, Renske A. M.; Mainhard, M. Tim; Meijer, Paulien C.; Brekelmans, Mieke; Pilot, Albert

2013-01-01

A growing body of research has investigated student perceptions of written feedback in higher education coursework, but few studies have considered feedback perceptions in one-on-one and face-to-face contexts such as master's thesis projects. In this article, student perceptions of feedback are explored in the context of the supervision of…

What Is The Role of Thesis In Dentistry? Evaluation of the View Point of Senior and Graduated Students and Supervisor Teachers of Mashhad Dental School in 2010

Directory of Open Access Journals (Sweden)

Samane Habibi

Full Text Available Introduction: In the education system in the country, thesis works as a way to solve research problems and thesis presentation is based as part of the research. To improve the quality of dissertations, it is essential to have an accurate evaluation of the objectives, practical process, process and efficiency of the course by supervisors, graduates and students. The purpose of this study was evaluation of the view point of senior and graduated students and supervisor teachers of Mashhad dental school about thesis.Materials & Methods: Forty eight supervisors, 40 students and 50 graduates from Mashhad dental school participated in this cross sectional descriptive study in the year 2010. Three questionnaires, which proved to be valid and reliable, were used for data collection. Results were analyzed according to the frequency distribution of variable and average of description. Common questions were compared by Kruskal-Wallis test at a significance level of 95%.Results: The data indicated that the effect of thesis presentation on the activities leading to production and basic science and increase in professional knowledge and skills were average while it was very effective in teaching research methods. Students, graduates and supervisors together agreed on the completion of a joint research project in the early years of school and covering an education subject about thesis goals. Supervisors estimated the effect of thesis result in community to be more than that of the graduates (P=0.03. In addition, supervisors had less agreement on thesis as a voluntary course compared to students and graduates (P=0.01.Conclusion: Based on findings of this study, because of the great amount of budget and time spent on thesis, it is better to optimize the presented results and recommendations in this regard. It also seems that the greatest impact on improving the process would be created through revising the rules, creating supportive organizations actively and

Effect of roughened micro-threaded implant neck 
and platform switching on marginal bone loss: 
a multicenter retrospective study with 6-year follow-up.

Science.gov (United States)

Di Stefano, Danilo Alessio; Giacometti, Edoardo; Greco, Gian Battista; Gastaldi, Giorgio; Gherlone, Enrico

2016-01-01

The aim of this retrospective study was to evaluate medium-term marginal peri-implant bone loss following placement of root-form implants featuring a micro-threaded rough-surfaced neck and a platform-switched implant-abutment connection. Records were identified of patients treated with such implants over a 3-year period at three Italian dental centers. Patient radiographs were digitized and subjected to computerized analysis of peri-implant bone resorption. Records of 112 patients who received 257 implants were analyzed. Although implant diameters and lengths varied, all had a 0.3-mm platform-switching width and a 2.5-mm high micro-threaded neck. All patients healed uneventfully, and no peri-implant infection, implant mobility, or radiolucency around the implant were detected at any follow-up control. At the 72-month control (average 71 ± 5 months) all implants were successful according to Albrektsson and Zarb's criteria. At implant level, average peri-implant bone resorption was 0.18 ± 0.12 mm at 6 months, 0.22 ± 0.15 mm at 12 months, 0.23 ± 0.16 mm at 24 months, 0.25 ± 0.17 mm at 36 months, 0.26 ± 0.15 mm at 48 months, and stable at subsequent controls, regardless of the implant diameter and length. At patient level, a similar trend was observed, with crestal bone loss stabilizing from 48 months onward. The surface, geometry, and platform-switching features of the implant under investigation allowed effective bone preservation on a medium-term basis.

Revolutionary composite joining method; from an aerospace thesis research to founding a new company

NARCIS (Netherlands)

Bergman, A.

2014-01-01

In 2011, Peter Madlener started his graduation thesis at the Aerospace Engineering faculty on a new joining technology for composite sandwich panels. The promising results gained in this thesis led to the foundation of MOCS: a young company with the ambitious goal of introducing a revolutionary

"Breaking the Mold" in the Dissertation: Implementing a Problem-Based, Decision-Oriented Thesis Project

Science.gov (United States)

Archbald, Doug

2010-01-01

This article offers lessons from an initiative refashioning the doctoral thesis in an education leadership program. The program serves a practitioner clientele; most are teachers and administrators. The new model for the thesis emphasizes leadership, problem solving, decision making, and organizational improvement. The former model was a…

Restructurization of Heat-and-Power Engineering System of Open Joint-Stock Company «Mogilevkhimvolokno», Producing Polyester Threads (Part 1

Directory of Open Access Journals (Sweden)

A. V. Bychkovsky

2007-01-01

Full Text Available On the basis of thermodynamic analysis the paper considers a complex approach to heat-and-power engineering system applied for polyester thread production. As a result of this analysis a structure of power supply required for heat engineering are clearly observed and its main system shortcomings are revealed as well.

Supporting the Thesis Writing Process of International Research Students through an Ongoing Writing Group

Science.gov (United States)

Li, Linda Y.; Vandermensbrugghe, Joelle

2011-01-01

Evidence from research suggests writing support is particularly needed for international research students who have to tackle the challenges of thesis writing in English as their second language in Western academic settings. This article reports the development of an ongoing writing group to support the thesis writing process of international…

Intergroup contact and ingroup reappraisal : examining the deprovincialization thesis

NARCIS (Netherlands)

Verkuyten, M.J.A.M.; Thijs, J.T.; Bekhuis, H.

2010-01-01

According to the deprovincialization thesis, interethnic contact involves a reappraisal and distancing from the ingroup. Contact can broaden one’s horizon by acknowledging and recognizing the value of other cultures and thereby putting the taken-for-granted own cultural standards into perspective.

Consistency and Inconsistency in PhD Thesis Examination

Science.gov (United States)

Holbrook, Allyson; Bourke, Sid; Lovat, Terry; Fairbairn, Hedy

2008-01-01

This is a mixed methods investigation of consistency in PhD examination. At its core is the quantification of the content and conceptual analysis of examiner reports for 804 Australian theses. First, the level of consistency between what examiners say in their reports and the recommendation they provide for a thesis is explored, followed by an…

Analysis of and reflection on bachelor thesis in nursing students: A descriptive study in Spain.

Science.gov (United States)

Roca, Judith; Gros, Silvia; Canet, Olga

2018-06-11

The bachelor thesis, a final year subject to obtain a nursing degree, presents an ideal opportunity for the development and assessment of professional competencies. Thus, it is necessary to specify that the structure of the bachelor thesis works as an element of review and reflection from both a pedagogical and professional perspective. To analyse the main elements of the bachelor thesis in the nursing degree 2015-16 in Spain. A transversal descriptive study was conducted using a quantitative documentary analysis via study guides or grade reports. The variables were the main academic elements of the bachelor thesis subject (credits, competencies, learning outcomes, contents, methodologies, training activities and assessment). A probabilistic sample of 66 institutions was studied using descriptive statistics with statistical measures of central tendency and measures of variability. The results showed a maximum range of 12 and a minimum of 6 European Credit Transfer and Accumulation System. The definition and number of competencies to be developed varied and the learning outcomes were formulated in only 40.9% of the guides consulted. The most widely used teaching methodologies and training activities were academic supervision (87.9%) and autonomous work (80.3%). Regarding types of work, basic investigation (34.8%), care plans (33.3%) and literature review (30,3%) ranked highest. No specific descriptors could be linked to the contents. Finally, two main assessment tools were found: process and product. The rubric is presented as a main element of the assessment. The bachelor thesis is conceived as autonomous, personal and original academic work. But no homogeneity was observed in the key development elements such as competencies, teaching strategies, or type of bachelor thesis. Therefore, the findings from the analysis and the bibliographic review are presented as recommendations as regards the outcome, structure and/or teaching elements linked to the bachelor thesis

A Content Analysis of the Postgraduate Thesis Written on Special Education in Turkey Based on Various Variables (2009-2014)

Science.gov (United States)

Demirok, Mukaddes Sakalli; Besgul, Meyrem; Baglama, Basak

2016-01-01

The aim of this study was to examine postgraduate thesis studies conducted between the years of 2009 and 2014 in special education field in Turkey based on various variables and figure out how many of these thesis is related with hearing disability. A total number of 146 postgraduate thesis have been found in the thesis scanning center of Higher…

Radiocarbon dating of the silk fabrics laced with colored threads 'Ezo Nishiki' by AMS

International Nuclear Information System (INIS)

Oda, Hirotaka; Nakamura, Kazuyuki; Amano, Hikaru; Yoshida, Miyo; Takimoto, Hisafumi

2010-01-01

Ezo Nishiki are silk fabrics in which elegant designs of dragon or peony were laced with color threads. They were made originally in China and imported into Japan by way of the Amur Basin and Sakhalin. Although the foreign commerce flourished actively during Quing dynasty (1616-1912), a few ancient records suggests that the origin ascends to Yuan (1271-1368) or early Ming dynasty (1368-1644). We measured radiocarbon ages of 34 Ezo Nishiki samples. Although most of them showed the period of Quing dynasty, a sample indicated that the origin of the trade can be traced back to the middle 14th or the early 15th century. (author)

How to do a postgraduate research project and write a minor thesis.

Science.gov (United States)

Duke, Trevor

2018-05-26

Many universities and colleges in low-income and middle-income countries require a masters dissertation or thesis for as part of postgraduate training, and some colleges offer a 1-year to 2-year diploma of child health as a clinical qualification to enable skills in child health for generalists, or as part of the early phase of paediatric training. This paper describes the stages of doing a research project for such a masters or diploma, and describes in detail how to write a minor thesis. The paper is designed to provide a practical approach for junior researchers, and their supervisors. Colleges differ in their formal requirements of a minor thesis (word count, line spacing, referencing style), but this paper outlines the principles and practical issues rarely covered elsewhere. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Small hook thread (Quill) and soft felt internal splint to increase the primary repair strength of lacerated rabbit Achilles tendons: biomechanical analysis and considerations for hand surgery.

Science.gov (United States)

Buschmann, Johanna; Müller, Angela; Feldman, Kirill; Tervoort, Theo A; Fessel, Gion; Snedeker, Jess G; Giovanoli, Pietro; Calcagni, Maurizio

2011-07-01

For the prevention of re-rupture during early healing phase, the primary repair strength of repaired lacerated tendons in hand surgery should be maximal and the reconstructed diameter minimal. Two new repair methods (small hook thread and internal splint) were assessed for strength and reconstructed diameter characteristics. Achilles tendons of 43 female New Zealand White rabbits were sectioned 2 cm above the calcaneus. Specimens were divided into 7 groups and repaired as follows: Kirchmayr method 2-strand with 4.0 polypropylene thread; Becker method 4-strand; 6-strand; internal splint; Kirchmayr method small hook 2-strand; Becker method small hook 4-strand, non-modified tendon. Load until failure, load until gap formation, gap length, cross-sectional area and failure stress were determined. The small hook 2-strand suture had 1.3 fold higher loads until failure compared to a conventional 2-strand suture, P<0.05. The internal splint had a similar load until failure (22 N (SD 6)) as the conventional 2-strand suture (23 N (SD 4)); around half the load until failure of the conventional 4-strand suture (38 N (SD 9)). Load until gap formation correlated positively with load until failure (y=0.65+3.6; r(2)=0.72). The running suture increased the cross-sectional area at the repair site by a factor of 1.3. Using a small hook thread instead of a 4.0 polypropylene thread significantly increases the primary repair strength with the same number of strands. Internal splints may be an alternative to conventional 2-strand sutures for bridging large gaps. Copyright © 2011 Elsevier Ltd. All rights reserved.

Project families: A new concept for student thesis activities

DEFF Research Database (Denmark)

Goltermann, Per; Ottosen, Lisbeth M.; Schmidt, Jacob Wittrup

2017-01-01

The students’ activities during their final thesis work have been organised in project families, i.e. a group of individual student project organized in a shared learning environment. The aim is more efficient supervision and support, simultaneously to improved learning. DTU Byg have now tested...

Evidence for moving of threading dislocations during the VPE growth in GaN thin layers

Energy Technology Data Exchange (ETDEWEB)

Kuwano, Noriyuki [Art, Science and Technology Center for Cooperative Research, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Department of Applied Science for Electronics and Materials, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Miyake, Hideto; Hiramatsu, Kazumasa [Department of Electrical and Electronic Engineering, Mie University, Tsu, Mie 514-8507 (Japan); Amano, Hiroshi [Graduate School of Engineering, Akasaki Research Center, Nagoya University, Furo-cho, Chikusa, Nagoya 464-8603 (Japan); Akasaki, Isamu [Faculty of Science and Technology, Meijo University, 1-501 Shiogamaguchi, Tempaku, Nagoya 468-8502 (Japan)

2011-05-15

Cross-sectional transmission electron microscope (TEM) observation was performed in detail to analyze the morphology of threading dislocations (TDs) in GaN thin layers with various thicknesses. The GaN layers were overgrown on an Al{sub 0.28}Ga{sub 0.72}N layer by the metal-organic vapor-phase epitaxy (MOVPE) method. In a GaN layer about 50 nm in thickness, TDs running up in the AlGaN layer pass into the GaN layer and most of them reach the top surface without bending. In thicker GaN layers, on the other hand, many of TDs form a hairpin-configuration on or above the interface of GaN and AlGaN to be annihilated. This difference in morphology of TDs indicates that the TDs have moved down inside the GaN layer. Since the formation of hairpins is attributed to a stress-relief, there should be an extra half-plane between the paired TDs. Therefore, the movement of TDs should be of ''climb motion''. Another example of possible TD movement inside a GaN layer is also described. It is emphasized that the possibility of TD-movements inside the thin film crystal during the growth should be taken into account in analysis of thin-layer growth through the behavior of TDs (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

A Tradition Unlike Any Other: Research on the Value of an Honors Senior Thesis

Science.gov (United States)

Banks, H. Kay

2016-01-01

An honors senior thesis introduces students into a world of scholarship and professional activity in a way that no single course, either semester- or year-long, can do (Anderson, Lyons, and Weiner). Many honors educators consider honors thesis work to be the defining honors experience. For graduate schools, employers, and the students themselves,…

A Supervisor's Roles for Successful Thesis and Dissertation

Science.gov (United States)

Mhunpiew, Nathara

2013-01-01

The success of a thesis or a dissertation for a graduate student relies upon the roles of their supervisor. The student not only needs to be equipped with the knowledge, but also be able to manage others and external factors at the same time. The journey during the period of conducting research is mixed with various tasks. Five supportive roles of…

Finite element analysis of the stress distributions in peri-implant bone in modified and standard-threaded dental implants

Directory of Open Access Journals (Sweden)

Serkan Dundar

2016-01-01

Full Text Available The aim of this study was to examine the stress distributions with three different loads in two different geometric and threaded types of dental implants by finite element analysis. For this purpose, two different implant models, Nobel Replace and Nobel Active (Nobel Biocare, Zurich, Switzerland, which are currently used in clinical cases, were constructed by using ANSYS Workbench 12.1. The stress distributions on components of the implant system under three different static loadings were analysed for the two models. The maximum stress values that occurred in all components were observed in FIII (300 N. The maximum stress values occurred in FIII (300 N when the Nobel Replace implant is used, whereas the lowest ones, in the case of FI (150 N loading in the Nobel Active implant. In all models, the maximum tensions were observed to be in the neck region of the implants. Increasing the connection between the implant and the bone surface may allow more uniform distribution of the forces of the dental implant and may protect the bone around the implant. Thus, the implant could remain in the mouth for longer periods. Variable-thread tapered implants can increase the implant and bone contact.

The Honors Thesis: A Handbook for Honors Directors, Deans, and Faculty Advisors. National Collegiate Honors Council Monograph Series

Science.gov (United States)

Anderson, Mark; Lyons, Karen; Weiner, Norman

2014-01-01

This handbook is intended to help all those who design, administer, and implement honors thesis programs--honors directors, deans, staff, faculty, and advisors--evaluate their thesis programs, solve pressing problems, select more effective requirements or procedures, or introduce an entirely new thesis program. The authors' goal is to provide…

Threads: theory of Vygotsky to learning processes and child development in early childhood education mediated by toy construction

Directory of Open Access Journals (Sweden)

Fábio Tadeu Reina

2016-05-01

Full Text Available This article has the objectivity to point out some of the threads of the cultural historical theory of Vygotsky partner to the process of learning and development of children in early childhood education mediated by the construction of toys and games. In this direction, looking to approach the foundations of this theory in order to internalize the reader in his work in search of reflections and readings on the theme proposed here.

Recognizing, explaining and countering norm transgressive behaviour on social media

NARCIS (Netherlands)

Padje, E.D.H.

2016-01-01

In this thesis, it is researched how norm transgressive behaviour exhibited on the Dutch domains of social media can be recognized, explained and countered. An analysis of four comment threads is conducted, of which the comments can be found on the Facebook pages of three Dutch news sites and on a

Intergroup Contact and Ingroup Reappraisal: Examining the Deprovincialization Thesis

Science.gov (United States)

Verkuyten, Maykel; Thijs, Jochem; Bekhuis, Hidde

2010-01-01

According to the deprovincialization thesis, interethnic contact involves a reappraisal and distancing from the ingroup. Contact can broaden one's horizon by acknowledging and recognizing the value of other cultures and thereby putting the taken-for-granted own cultural standards into perspective. The current research uses data from three surveys…

THE WEBER THESIS OF CALVINISM AND CAPITALISM--ITS VARIOUS VERSIONS AND THEIR "FATE" IN SOCIAL SCIENCE.

Science.gov (United States)

Zafirovski, Milan

2016-01-01

The paper identifies and examines various multiple renditions of the so-called Weber Thesis of an historical association and convergence between ascetic Protestantism, above all Calvinism, and the emergence and development of modern capitalism as an economic spirit and system. Specifically, it detects at least four different versions and formulations or interpretations, thus casting doubt in the common view of the Weber Thesis as a single and monolithic theory or hypothesis. The paper also considers the status of the multiple versions of the Weber Thesis in post-Weberian and contemporary sociology and related disciplines like economics and history. It concludes that the weaker, relaxed renditions of the Weber Thesis have attained a greater success and more endured in contemporary social science than have its stronger, stricter versions. © 2015 Wiley Periodicals, Inc.

Queueing systems with heavy tails (Summary of Ph.D. thesis on the occasion of receiving the Gijs de Leve prize)

NARCIS (Netherlands)

Zwart, A.P.

2003-01-01

This article gives a short summary of my PhD thesis Queueing Systems with Heavy-tails, winner of the Gijs De Leve prize for the best Dutch thesis in operations research in the period 2000-2002. Apart from the Gijs de Leve prize, this thesis also received the ASML prize, for best thesis in Ihe

News from the Library: Share your work, submit your thesis to CDS!

CERN Multimedia

CERN Library

2011-01-01

Are you a student paid by CERN, using CERN equipment or advised by CERN staff and you are currently writing a thesis? Then you should know that you are welcome to submit your final work to the CERN Document Server (CDS), where it will be made available by Open Access.   This is the most efficient way of sharing your work within the community - your thesis will certainly find a much greater audience than if you follow the advice of certain dubious publishing companies (see the article Free access to science... but at what cost? published in this issue). At the same time, you ensure long-term storage of your file. All theses qualify, from bachelor to PhD, and any language is accepted. You simply go to CDS and submit your work. If your thesis was written some years ago it is still not too late to submit it; it will then get a new life on CDS! More information here. CERN Theses collection here. If you have any questions or submission problems, please do not hesitate to contact Catherine Cart. ...

A thesis on fire : Studies of work engagement, Type A behavior and burnout

OpenAIRE

Eriksson Hallberg, Ulrika

2005-01-01

The overall address of the present thesis is the relationship between being ‘on fire’ and burning out. More specifically, the thesis focused largely on two representations of involvement in work (work engagement and Type A behavior) and their respective relationships to burnout. Another pervasive theme was construct validity in assessing burnout and work engagement. These themes were addressed in four empirical studies, conducted in a sample of health-care workers (Study I) and a sample of in...

Turning Points: Improving Honors Student Preparation for Thesis Completion

Science.gov (United States)

Patino, Cynthia

2012-01-01

This dissertation is an action research study that had as its primary goal to increase retention of honors college students at Arizona State University by implementing an additional advising session during the fifth semester of their academic career. Introducing additional, strategically-timed support for the honors thesis and demystifying the…

The starting of the scientific research: workshops thesis in the Department and in the Faculty

Directory of Open Access Journals (Sweden)

Carlos Manuel Caraballo Carmona

2014-12-01

Full Text Available This article presents a methodology to develop workshops thesis at the department level by the docto rate beginners. This research process of writing and defending the PhD thesis, will guide the researcher to get familiar with the research process that he develops and achieves. Additionally this article allows the researcher in his thesis workshops to sho w the theoretical knowledge related with the research methodology to ensure base d on science each of the results obtained during the research process. The purpose of this article is that the researcher present s a theoretical - methodological design supported by a high and strict theoretical work.

Publishing a Master’s Thesis: A Guide for Novice Authors

Science.gov (United States)

Resta, Robert G.; McCarthy Veach, Patricia; Charles, Sarah; Vogel, Kristen; Blase, Terri

2010-01-01

Publication of original research, clinical experiences, and critical reviews of literature are vital to the growth of the genetic counseling field, delivery of genetic counseling services, and professional development of genetic counselors. Busy clinical schedules, lack of time and funding, and training that emphasizes clinical skills over research skills may make it difficult for new genetic counselors to turn their thesis projects into publications. This paper summarizes and elaborates upon a presentation aimed at de-mystifying the publishing process given at the 2008 National Society of Genetic Counselors Annual Education Conference. Specific topics include familiarizing prospective authors, particularly genetic counseling students, with the basics of the publication process and related ethical considerations. Former students’ experiences with publishing master’s theses also are described in hopes of encouraging new genetic counselors to submit for publication papers based on their thesis projects. PMID:20076994

Application of multi-thread computing and domain decomposition to the 3-D neutronics Fem code Cronos

International Nuclear Information System (INIS)

Ragusa, J.C.

2003-01-01

The purpose of this paper is to present the parallelization of the flux solver and the isotopic depletion module of the code, either using Message Passing Interface (MPI) or OpenMP. Thread parallelism using OpenMP was used to parallelize the mixed dual FEM (finite element method) flux solver MINOS. Investigations regarding the opportunity of mixing parallelism paradigms will be discussed. The isotopic depletion module was parallelized using domain decomposition and MPI. An attempt at using OpenMP was unsuccessful and will be explained. This paper is organized as follows: the first section recalls the different types of parallelism. The mixed dual flux solver and its parallelization are then presented. In the third section, we describe the isotopic depletion solver and its parallelization; and finally conclude with some future perspectives. Parallel applications are mandatory for fine mesh 3-dimensional transport and simplified transport multigroup calculations. The MINOS solver of the FEM neutronics code CRONOS2 was parallelized using the directive based standard OpenMP. An efficiency of 80% (resp. 60%) was achieved with 2 (resp. 4) threads. Parallelization of the isotopic depletion solver was obtained using domain decomposition principles and MPI. Efficiencies greater than 90% were reached. These parallel implementations were tested on a shared memory symmetric multiprocessor (SMP) cluster machine. The OpenMP implementation in the solver MINOS is only the first step towards fully using the SMPs cluster potential with a mixed mode parallelism. Mixed mode parallelism can be achieved by combining message passing interface between clusters with OpenMP implicit parallelism within a cluster

Application of multi-thread computing and domain decomposition to the 3-D neutronics Fem code Cronos

Energy Technology Data Exchange (ETDEWEB)

Ragusa, J.C. [CEA Saclay, Direction de l' Energie Nucleaire, Service d' Etudes des Reacteurs et de Modelisations Avancees (DEN/SERMA), 91 - Gif sur Yvette (France)

2003-07-01

The purpose of this paper is to present the parallelization of the flux solver and the isotopic depletion module of the code, either using Message Passing Interface (MPI) or OpenMP. Thread parallelism using OpenMP was used to parallelize the mixed dual FEM (finite element method) flux solver MINOS. Investigations regarding the opportunity of mixing parallelism paradigms will be discussed. The isotopic depletion module was parallelized using domain decomposition and MPI. An attempt at using OpenMP was unsuccessful and will be explained. This paper is organized as follows: the first section recalls the different types of parallelism. The mixed dual flux solver and its parallelization are then presented. In the third section, we describe the isotopic depletion solver and its parallelization; and finally conclude with some future perspectives. Parallel applications are mandatory for fine mesh 3-dimensional transport and simplified transport multigroup calculations. The MINOS solver of the FEM neutronics code CRONOS2 was parallelized using the directive based standard OpenMP. An efficiency of 80% (resp. 60%) was achieved with 2 (resp. 4) threads. Parallelization of the isotopic depletion solver was obtained using domain decomposition principles and MPI. Efficiencies greater than 90% were reached. These parallel implementations were tested on a shared memory symmetric multiprocessor (SMP) cluster machine. The OpenMP implementation in the solver MINOS is only the first step towards fully using the SMPs cluster potential with a mixed mode parallelism. Mixed mode parallelism can be achieved by combining message passing interface between clusters with OpenMP implicit parallelism within a cluster.

Matlab enhanced multi-threaded tomography optimization sequence (MEMTOS)

International Nuclear Information System (INIS)

Lum, Edward S.; Pope, Chad L.

2016-01-01

Highlights: • Monte Carlo simulation of spent nuclear fuel assembly neutron computed tomography. • Optimized parallel calculations conducted from within the MATLAB environment. • Projection difference technique used to identify anomalies in spent nuclear fuel assemblies. - Abstract: One challenge associated with spent nuclear fuel assemblies is the lack of non-destructive analysis techniques to determine if fuel pins have been removed or replaced or if there are significant defects associated with fuel pins deep within a fuel assembly. Neutron computed tomography is a promising technique for addressing these qualitative issues. Monte Carlo simulation of spent nuclear fuel neutron computed tomography allows inexpensive process investigation and optimization. The main purpose of this work is to provide a fully automated advanced simulation framework for the analysis of spent nuclear fuel inspection using neutron computed tomography. The simulation framework, called Matlab Enhanced Multi-Threaded Tomography Optimization Sequence (MEMTOS) not only automates the simulation process, but also generates superior tomography image results. MEMTOS is written in the MATLAB scripting language and addresses file management, parallel Monte Carlo execution, results extraction, and tomography image generation. This paper describes the mathematical basis for neutron computed tomography, the Monte Carlo technique used to simulate neutron computed tomography, and the overall tomography simulation optimization algorithm. Sequence results presented include overall simulation speed enhancement, tomography and image results obtained for Experimental Breeder Reactor II spent fuel assemblies and light water reactor fuel assemblies. Optimization using a projection difference technique are also described.

[Case control trial on putative factors antagonising the successful project course of MD thesis projects].

Science.gov (United States)

Scharfenberg, J; Schaper, K; Krummenauer, F

2015-05-01

Award of the degree MD has special relevance in Germany since the underlying research project can be started during the qualification for admission to doctoral training. This leads to a large number of thesis projects with a not always sufficiently pronounced enthusiasm and thus poor chances of success. Accordingly a case control study was undertaken in the Department of Human Medicine, Witten/Herdecke University to investigate reported drop-outs of thesis projects. In autumn 2012 all students in the clinical phases of human medicine education were surveyed using a self-conceived questionnaire on previously initiated or terminated thesis projects, "terminated" is defined as the unsuccessful ending of a project after working for at least 3 months. Individually reported thesis terminations were evaluated using defined items in a 4-stage Likert scale regarding thesis plan and project, subsequently, graduate students who successfully completed a project received the same questionnaire. The items possibly corresponding to process determinants were averaged to a total of 7 dimensions prior to the analysis; the resulting scores were normalised in value ranges 0.0 to 1.0 (1.0 = optimal project situation) whereby individual items could be included in several scores. By means of 5 items a primary endpoint from the faculty's perspective on "compliance with formal procedures" was aggregated; by means of a two-sided Wilcoxon test at the 5 % level students with unsuccessful and successful courses were compared along the corresponding scores. 181 of 276 students from 7 study semesters participated in the screening; details of 17 terminations and 23 currently successful courses could be evaluated in the case control study. For significant differences (p thesis projects to the responsible committees. A weakness is the low number of evaluable self-reported drop-outs as well as the overall moderate response rate. Georg Thieme Verlag KG Stuttgart · New York.

Strategies for Finding and Selecting an Ideal Thesis or Dissertation Topic: A Review of Literature

Science.gov (United States)

Lei, Simon A.

2009-01-01

Choosing an ideal master's thesis or doctoral dissertation topic is probably one of the most important decisions students will make while in graduate school. Some graduate students may spend a year or even longer looking for potential topics before finally selecting one for their thesis or dissertation. There are a number of successful strategies…

Field-Lines-Threaded Model for: (1) the Low Solar Corona; (2) Electrons in the Transition Region; and (3) Solar Energetic Particle Acceleration and Transport

Science.gov (United States)

Sokolov, I.; van der Holst, B.; Jin, M.; Gombosi, T. I.; Taktakishvili, A.; Khazanov, G. V.

2013-12-01

In numerical simulations of the solar corona, both for the ambient state and especially for dynamical processes the most computational resources are spent for maintaining the numerical solution in the Low Solar Corona and in the transition region, where the temperature gradients are very sharp and the magnetic field has a complicated topology. The degraded computational efficiency is caused by the need in a highest resolution as well as the use of the fully three-dimensional implicit solver for electron heat conduction. On the other hand, the physical nature of the processes involved is rather simple (which still does not facilitate the numerical methods) as long as the heat fluxes as well as slow plasma motional velocities are aligned with the magnetic field. The Alfven wave turbulence, which is often believed to be the main driver of the solar wind and the main source of the coronal heating, is characterized by the Poynting flux of the waves, which is also aligned with the magnetic field. Therefore, the plasma state in any point of the three-dimensional grid in the Low Solar Corona can be found by solving a set of one-dimensional equations for the magnetic field line ('thread'), which passes through this point and connects it to the chromosphere and to the global Solar Corona. In the present paper we describe an innovative computational technology based upon the use of the magnetic-field-line-threads to find the local solution. We present the development of the AWSoM code of the University of Michigan with the field-lines-threaded Low Solar Corona. In the transition region, where the essentially kinetic description of the electron energy fluxes is required, we solve the Fokker-Plank equation on the system of threads, to achieve the physically consistent description of chromosphere evaporation. The third application for the field-lines-treaded model is the Solar Energetic Particle (SEP) acceleration and transport. Being the natural extension of the Field

Eugenics and moral authorship. Analysis of a Habermas´s thesis

Directory of Open Access Journals (Sweden)

César Ortega Esquembre

2017-08-01

Full Text Available The aim of this paper is to study the Jürgen Habermas´s vision of genetic manipulation; in particular, it will be addressed critically his assumption that the genetically engineered person would loose his awareness of authorship. In the author´s view, positive genetic intervention —one that is to genetically enhance the subject— would eliminate the awareness of authorship of that subject, as well as his self-understanding as moral agent. Two aspects of the question will be approached: firstly, the correctness or incorrectness of Habermas´s thesis. Secondly, the relevance of the thesis to oppose positive eugenics. Could be other arguments considered within Habermas´s conceptual framework to oppose positive eugenics?

Interplay of catalysis, fidelity, threading, and processivity in the exo- and endonucleolytic reactions of human exonuclease I

Energy Technology Data Exchange (ETDEWEB)

Shi, Yuqian; Hellinga, Homme W.; Beese, Lorena S. (Duke-MED)

2017-05-22

Human exonuclease 1 (hExo1) is a member of the RAD2/XPG structure-specific 5'-nuclease superfamily. Its dominant, processive 5'–3' exonuclease and secondary 5'-flap endonuclease activities participate in various DNA repair, recombination, and replication processes. A single active site processes both recessed ends and 5'-flap substrates. By initiating enzyme reactions in crystals, we have trapped hExo1 reaction intermediates that reveal structures of these substrates before and after their exo- and endonucleolytic cleavage, as well as structures of uncleaved, unthreaded, and partially threaded 5' flaps. Their distinctive 5' ends are accommodated by a small, mobile arch in the active site that binds recessed ends at its base and threads 5' flaps through a narrow aperture within its interior. A sequence of successive, interlocking conformational changes guides the two substrate types into a shared reaction mechanism that catalyzes their cleavage by an elaborated variant of the two-metal, in-line hydrolysis mechanism. Coupling of substrate-dependent arch motions to transition-state stabilization suppresses inappropriate or premature cleavage, enhancing processing fidelity. The striking reduction in flap conformational entropy is catalyzed, in part, by arch motions and transient binding interactions between the flap and unprocessed DNA strand. At the end of the observed reaction sequence, hExo1 resets without relinquishing DNA binding, suggesting a structural basis for its processivity.

In Vitro Laser Treatment Platform Construction with Dental Implant Thread Surface on Bacterial Adhesion for Peri-Implantitis

Directory of Open Access Journals (Sweden)

Hsien-Nan Kuo

2017-01-01

Full Text Available This study constructs a standard in vitro laser treatment platform with dental implant thread surface on bacterial adhesion for peri-implantitis at different tooth positions. The standard clinical adult tooth jaw model was scanned to construct the digital model with 6 mm bone loss depth on behalf of serious peri-implantitis at the incisor, first premolar, and first molar. A cylindrical suite connected to the implant and each tooth root in the jaw model was designed as one experimental unit set to allow the suite to be replaced for individual bacterial adhesion. The digital peri-implantitis and suite models were exported to fulfill the physical model using ABS material in a 3D printer. A 3 mm diameter specimen implant on bacterial adhesion against Escherichia coli was performed for gram-negative bacteria. An Er:YAG laser, working with a chisel type glass tip, was moved from the buccal across the implant thread to the lingual for about 30 seconds per sample to verify the in vitro laser treatment platform. The result showed that the sterilization rate can reach 99.3% and the jaw model was not damaged after laser irradiation testing. This study concluded that using integrated image processing, reverse engineering, CAD system, and a 3D printer to construct a peri-implantitis model replacing the implant on bacterial adhesion and acceptable sterilization rate proved the feasibility of the proposed laser treatment platform.

Prevailing Torque Locking Feature in Threaded Fasteners Using Anaerobic Adhesive

Science.gov (United States)

Hernandez, Alan; Hess, Daniel P.

2016-01-01

This paper presents results from tests to assess the use of anaerobic adhesive for providing a prevailing torque locking feature in threaded fasteners. Test procedures are developed and tests are performed on three fastener materials, four anaerobic adhesives, and both unseated assembly conditions. Five to ten samples are tested for each combination. Tests for initial use, reuse without additional adhesive, and reuse with additional adhesive are performed for all samples. A 48-hour cure time was used for all initial use and reuse tests. Test data are presented as removal torque versus removal angle with the specification required prevailing torque range added for performance assessment. Percent specification pass rates for the all combinations of fastener material, adhesive, and assembly condition are tabulated and reveal use of anaerobic adhesive as a prevailing torque locking feature is viable. Although not every possible fastener material and anaerobic adhesive combination provides prevailing torque values within specification, any combination can be assessed using the test procedures presented. Reuse without additional anaerobic adhesive generally provides some prevailing torque, and in some cases within specification. Reuse with additional adhesive often provides comparable removal torque data as in initial use.

Climate change, values, and the cultural cognition thesis

OpenAIRE

Persson, Johannes; Sahlin, Nils-Eric; Wallin, Annika

2015-01-01

Recently the importance of addressing values in discussions of risk perception and adaptation to climate change has become manifest. Values-based approaches to climate change adaptation and the cultural cognition thesis both illustrate this trend. We argue that in the wake of this development it is necessary to take the dynamic relationship between values and beliefs seriously, to acknowledge the possibility of bi-directional relationships between values and beliefs, and to address the variet...

MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing

DEFF Research Database (Denmark)

2014-01-01

MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing......MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing...

False indications of 95Zr-95Nb internal contamination due to contaminated sacred thread

International Nuclear Information System (INIS)

Garg, S.P.; Singh, I.S.; Sharma, R.C.

2000-01-01

Whole body monitoring of a worker showed an apparent internal contamination with a considerable amount of 95 Zr- 95 Nb. Inhalation exposure was suspected to have taken place about a week earlier when he had last worked in the radioactive area. Unexpected fast clearance indicated by the third periodical weekly follow up monitoring was considered to be an abnormal behaviour. Investigations revealed an external contamination on a sacred thread, which the worker was putting on across his thorax and not removing it at the time of bath due to religious considerations. These studies have underscored that short term follow up measurements data should be critically scrutinized and a caution should be exercised in the interpretation such data particularly in case of such relatively short lived radionuclides. (author)

Toward a Digital Thread and Data Package for Metals-Additive Manufacturing.

Science.gov (United States)

Kim, D B; Witherell, P; Lu, Y; Feng, S

2017-01-01

Additive manufacturing (AM) has been envisioned by many as a driving factor of the next industrial revolution. Potential benefits of AM adoption include the production of low-volume, customized, complicated parts/products, supply chain efficiencies, shortened time-to-market, and environmental sustainability. Work remains, however, for AM to reach the status of a full production-ready technology. Whereas the ability to create unique 3D geometries has been generally proven, production challenges remain, including lack of (1) data manageability through information management systems, (2) traceability to promote product producibility, process repeatability, and part-to-part reproducibility, and (3) accountability through mature certification and qualification methodologies. To address these challenges in part, this paper discusses the building of data models to support the development of validation and conformance methodologies in AM. We present an AM information map that leverages informatics to facilitate part producibility, process repeatability, and part-to-part reproducibility in an AM process. We present three separate case studies to demonstrate the importance of establishing baseline data structures and part provenance through an AM digital thread.

Exfoliation of Threading Dislocation-Free, Single-Crystalline, Ultrathin Gallium Nitride Nanomembranes

KAUST Repository

Elafandy, Rami T.

2014-04-01

Despite the recent progress in gallium nitride (GaN) growth technology, the excessively high threading dislocation (TD) density within the GaN crystal, caused by the reliance on heterogeneous substrates, impedes the development of high-efficiency, low-cost, GaN-based heterostructure devices. For the first time, the chemical exfoliation of completely TD-free, single-crystalline, ultrathin (tens of nanometers) GaN nanomembranes is demonstrated using UV-assisted electroless chemical etching. These nanomembranes can act as seeding layers for subsequent overgrowth of high-quality GaN. A model is proposed, based on scanning and transmission electron microscopy as well as optical measurements to explain the physical processes behind the formation of the GaN nanomembranes. These novel nanomembranes, once transferred to other substrates, present a unique and technologically attractive path towards integrating high-efficiency GaN optical components along with silicon electronics. Interestingly, due to their nanoscale thickness and macroscopic sizes, these nanomembranes may enable the production of flexible GaN-based optoelectronics. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Democracies under rising inequality : New tests of the redistributive thesis

NARCIS (Netherlands)

van der Linde, D.E.

2017-01-01

Recent increases in income inequality have led a number of authors to question the redistributive thesis, which predicts higher levels of income inequality will be met with increased redistribution of income, curbing inequality. This dissertation offers a new test of this theory, and sets out to

Usability evaluation of user interface of thesis title review system

Science.gov (United States)

Tri, Y.; Erna, A.; Gellysa, U.

2018-03-01

Presentation of programs with user interface that can be accessed online through the website of course greatly provide user benefits. User can easily access the program they need. There are usability values that serve as a benchmark for the success of a user accessible program, ie efficiency, effectiveness, and convenience. These usability values also determine the development of the program for the better use. Therefore, on the review title thesis program that will be implemented in STT Dumai was measured usability evaluation. It aims to see which sides are not yet perfect and need to be improved to improve the performance and utilization of the program. Usability evaluation was measured by using smartPLS software. Database used was the result of respondent questionnaires that include questions about the experience when they used program. The result of a review of thesis title program implemented in STT Dumai has an efficiency value of 22.615, the effectiveness of 20.612, and satisfaction of 33.177.

Analysis of Business Process at PT XYZ by Using SCOR Thread Diagram

Science.gov (United States)

Sembiring, M. T.; Rambe, H. C.

2017-03-01

Supply Chain Operations Reference (SCOR) is a standard supply chain performance evaluation model which is proposed by Supply Chain Council (SCC). SCOR makes companies can analyse and evaluate their supply chain performance. SCOR has Thread Diagram which describes business process simply and systematically to help the analysis of company’s business process. This research takes place in PT XYZ that is involved in Crude Palm Oil (CPO) industry. PT XYZ used to be the market leader of CPO industry but nowadays they have a trouble to compete with new competitors. The purpose of this study is to provide the input for PT XYZ business process improvement to enhance the competitiveness of the company with the others. The result obtained shows that there are two performance metrics that are not reached. The analysis of business process shows the lack of control role of PT XYZ to supplier and customer side which is going to be the suggestion of improvement.

Learning Cultures in Travel and Tourism: A Critique of Manuela du Bois-Reymond's Trendsetter Learner Thesis

Science.gov (United States)

Morrison, Andrew

2011-01-01

This article aims to contribute to the discussion surrounding Manuela du Bois-Reymond's important "trendsetter learner" thesis and, in so doing, to join the wider debate about post-compulsory learning cultures. The article outlines the trendsetter learner thesis and then considers recent criticisms that it has attracted. While the author…

Acceptance of a systematic review as a thesis: survey of biomedical doctoral programs in Europe.

Science.gov (United States)

Puljak, Livia; Sapunar, Damir

2017-12-12

Systematic reviews (SRs) have been proposed as a type of research methodology that should be acceptable for a graduate research thesis. The aim of this study was to analyse whether PhD theses in European biomedical graduate programs can be partly or entirely based on SRs. In 2016, we surveyed individuals in charge of European PhD programs from 105 institutions. The survey asked about acceptance of SRs as the partial or entire basis for a PhD thesis, their attitude towards such a model for PhD theses, and their knowledge about SR methodology. We received responses from 86 individuals running PhD programs in 68 institutions (institutional response rate of 65%). In 47% of the programs, SRs were an acceptable study design for a PhD thesis. However, only 20% of participants expressed a personal opinion that SRs meet the criteria for a PhD thesis. The most common reasons for not accepting SRs as the basis for PhD theses were that SRs are 'not a result of a PhD candidate's independent work, but more of a team effort' and that SRs 'do not produce enough new knowledge for a dissertation'. The majority of participants were not familiar with basic concepts related to SRs; questions about meta-analyses and the type of plots frequently used in SRs were correctly answered by only one third of the participants. Raising awareness about the importance of SRs and their methodology could contribute to higher acceptance of SRs as a type of research that forms the basis of a PhD thesis.

Artistic freedom. The challenge of thesis supervision in an art ...

African Journals Online (AJOL)

Rigorous science – Artistic freedom. The challenge of thesis supervision in an art university. K Rinne, P Sivenius. Abstract. No Abstract. South African Journal of Higher Education Vol. 21 (8) 2007: pp. 1091-1102. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

An evaluation of the process and initial impact of disseminating a nursing e-thesis.

Science.gov (United States)

Macduff, Colin

2009-05-01

This paper is a report of a study conducted to evaluate product, process and outcome aspects of the dissemination of a nursing PhD thesis via an open-access electronic institutional repository. Despite the growth of university institutional repositories which make theses easily accessible via the world wide web, nursing has been very slow to evaluate related processes and outcomes. Drawing on Stake's evaluation research methods, a case study design was adopted. The case is described using a four-phase structure within which key aspects of process and impact are reflexively analysed. In the conceptualization/re-conceptualization phase, fundamental questions about the purpose, format and imagined readership for a published nursing PhD were considered. In the preparation phase, seven key practical processes were identified that are likely to be relevant to most e-theses. In the dissemination phase email invitations were primarily used to invite engagement. The evaluation phase involved quantitative indicators of initial impact, such as page viewing and download statistics and qualitative feedback on processes and product. Analysis of process and impact elements of e-thesis dissemination is likely to have more than intrinsic value. The advent of e-theses housed in web-based institutional repositories has the potential to transform thesis access and use. It also offers potential to transform the nature and scope of thesis production and dissemination. Nursing scholars can exploit and evaluate such opportunities.

Factors Mediating the Interactions between Adviser and Advisee during the Master's Thesis Project: A Quantitative Approach

Science.gov (United States)

Rodrigues Jr., Jose Florencio; Lehmann, Angela Valeria Levay; Fleith, Denise De Souza

2005-01-01

Building on previous studies centred on the interaction between adviser and advisee in masters thesis projects, in which a qualitative approach was used, the present study uses factor analysis to identify the factors that determine either a successful or unsuccessful outcome for the masters thesis project. There were five factors relating to the…

Writing a Thesis : A Guide for Scientific Reports

OpenAIRE

Engdahl, Ingrid; Sandqvist, Karin

2012-01-01

This guide is an introduction to one way to write scientific reports, the way we have been using and taught to our students in Teacher Education Programmes and Child and Youth Studies. It includes how to structure the text, suggested content to go under each heading, some rules about quotes and references, cooperation with the advisor and with fellow students and, finally, guides for the thesis seminar, an agenda for the seminar and advice for the opponent(s) and respondent(s). The references...

Closed reduction of displaced or dislocated mandibular condyle fractures in children using threaded Kirschner wire and external rubber traction.

Science.gov (United States)

Kim, J H; Nam, D H

2015-10-01

Most surgeons agree that closed treatment provides the best results for condylar fractures in children. Nevertheless, treatment of the paediatric mandibular condyle fracture that is severely displaced or dislocated is controversial. The purpose of this study was to investigate the long-term clinical and radiological outcomes following the treatment of displaced or dislocated condylar fractures in children using threaded Kirschner wire and external rubber traction. This procedure can strengthen the advantage of closed reduction and make up for the shortcomings of open reduction. From March 1, 2005 to December 25, 2011, 11 children aged between 4 and 12 years with displaced or dislocated mandibular condyle fractures were treated using threaded Kirschner wire and external rubber traction under portable C-arm fluoroscopy. All patients had unilateral displaced or dislocated condylar fractures. The follow-up period ranged from 24 to 42 months (mean 29.3 months). Normal occlusion and pain-free function of the temporomandibular joint, without deviation or limitation of jaw opening, was achieved in all patients. This closed reduction technique in displaced or dislocated condylar fractures in children offers a reliable solution in preventing the unfavourable sequelae of closed treatment and the open technique, such as altered morphology, functional disturbances, and facial nerve damage. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Nursing students' attitudes toward research and development within nursing: Does writing a bachelor thesis make a difference?

Science.gov (United States)

Uysal Toraman, Aynur; Hamaratçılar, Güler; Tülü, Begüm; Erkin, Özüm

2017-04-01

The aim of this study was to investigate the effect of writing a bachelor's thesis on nursing students' attitudes towards research and development in nursing. The study sample consisted of 91 nursing students who were required to complete a bachelor's thesis and 89 nursing students who were not required to complete a bachelor's thesis. Data were collected via self-report questionnaire that was distributed in May and June 2012. The questionnaire comprised 3 parts: (1) demographic items; (2) questions about "scientific activities," and (3) the nursing students' attitudes towards and awareness of research and development within nursing scale (version 2). The mean age of the students was 23 (1.3) years. The students who wrote a bachelor's thesis achieved a median score of 110.0, whereas the students in the other group had a median score of 105.0 on the scale. All the items were assigned a 3 or higher. A statistically significant difference was found between the 2 groups in their attitudes towards and awareness of research (U = 3265.5; P = .025). The results of this study suggest that writing a thesis in nursing education has a positive influence on nursing students' attitudes towards and awareness of research and development in nursing. © 2017 John Wiley & Sons Australia, Ltd.

Analyzing energy consumption of wireless networks. A model-based approach

Energy Technology Data Exchange (ETDEWEB)

Yue, Haidi

2013-03-04

During the last decades, wireless networking has been continuously a hot topic both in academy and in industry. Many different wireless networks have been introduced like wireless local area networks, wireless personal networks, wireless ad hoc networks, and wireless sensor networks. If these networks want to have a long term usability, the power consumed by the wireless devices in each of these networks needs to be managed efficiently. Hence, a lot of effort has been carried out for the analysis and improvement of energy efficiency, either for a specific network layer (protocol), or new cross-layer designs. In this thesis, we apply model-based approach for the analysis of energy consumption of different wireless protocols. The protocols under consideration are: one leader election protocol, one routing protocol, and two medium access control protocols. By model-based approach we mean that all these four protocols are formalized as some formal models, more precisely, as discrete-time Markov chains (DTMCs), Markov decision processes (MDPs), or stochastic timed automata (STA). For the first two models, DTMCs and MDPs, we model them in PRISM, a prominent model checker for probabilistic model checking, and apply model checking technique to analyze them. Model checking belongs to the family of formal methods. It discovers exhaustively all possible (reachable) states of the models, and checks whether these models meet a given specification. Specifications are system properties that we want to study, usually expressed by some logics, for instance, probabilistic computer tree logic (PCTL). However, while model checking relies on rigorous mathematical foundations and automatically explores the entire state space of a model, its applicability is also limited by the so-called state space explosion problem -- even systems of moderate size often yield models with an exponentially larger state space that thwart their analysis. Hence for the STA models in this thesis, since there

Thermal resistance of aluminum gravity heaГІ pipe with threaded capillary structure

Directory of Open Access Journals (Sweden)

Nikolaenko Yu. E.

2017-10-01

Full Text Available The results of an experimental study of the thermal resistance of an aluminum gravitational heat pipe with isobutane (R600a as a working fluid under conditions of heat removal of natural air convection are presented. Comparison of the thermal resistance of an aluminum gravitational heat pipe with a threaded capillary structure and the thermal resistance of an aluminum thermosyphon of the same size, having a smooth surface of the body in the evaporation zone, is given. It is shown that in the range of values of the input heat flux from 5 to 50 W the thermal resistance of the gravitational heat pipe is substantially lower than the thermal resistance of the thermosiphon. The studies were conducted both without the use of additional radiators in the condensation zone of heat transfer devices, and with the use of one, two and three radiators.

Writing a bachelor thesis generates transferable knowledge and skills useable in nursing practice.

Science.gov (United States)

Lundgren, Solveig M; Robertsson, Barbro

2013-11-01

Generic skills or transferable skills have been discussed in terms of whether or not skills learned in one context can be transferred into another context. The current study was aimed to explore nurses' self-perceptions of the knowledge and skills they had obtained while writing a Bachelor's thesis in nursing education, their experience of the extent of transfer and utilization in their current work. Responding nurses (N=42) had all worked from 1 to 1.5 years after their final examination and had completed a questionnaire that was structured with open-ended questions. Only five nurses reported that they were unable to use any of the knowledge and skills they had obtained from writing a thesis. A majority of the nurses (37/42) could give many examples of the practical application of the skills and knowledge they had obtained. Our findings indicate that writing a thesis as part of an undergraduate degree program plays a major role in the acquisition and development of knowledge and skills which can subsequently be transferred into and utilized in nursing practice. Copyright © 2012 Elsevier Ltd. All rights reserved.

Thermal Signature Identification System (TheSIS)

Science.gov (United States)

Merritt, Scott; Bean, Brian

2015-01-01

We characterize both nonlinear and high order linear responses of fiber-optic and optoelectronic components using spread spectrum temperature cycling methods. This Thermal Signature Identification System (TheSIS) provides much more detail than conventional narrowband or quasi-static temperature profiling methods. This detail allows us to match components more thoroughly, detect subtle reversible shifts in performance, and investigate the cause of instabilities or irreversible changes. In particular, we create parameterized models of athermal fiber Bragg gratings (FBGs), delay line interferometers (DLIs), and distributed feedback (DFB) lasers, then subject the alternative models to selection via the Akaike Information Criterion (AIC). Detailed pairing of components, e.g. FBGs, is accomplished by means of weighted distance metrics or norms, rather than on the basis of a single parameter, such as center wavelength.

Support for Different Roles in Software Engineering Master's Thesis Projects

Science.gov (United States)

Host, M.; Feldt, R.; Luders, F.

2010-01-01

Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

The Experienced Meaning of Working with a PhD Thesis

Science.gov (United States)

Stubb, Jenni; Pyhalto, Kirsi; Lonka, Kirsti

2012-01-01

There is a variation in terms of how researchers perceive the nature of research work. Previous research has mainly looked at the members of academia who already have established themselves in the scholarly community. We aimed at exploring the ways in which doctoral students perceived their thesis project and further, the relations of such…

Final Thesis Models in European Teacher Education and Their Orientation towards the Academy and the Teaching Profession

Science.gov (United States)

Råde, Anders

2014-01-01

This study concerns different final thesis models in the research on teacher education in Europe and their orientation towards the academy and the teaching profession. In scientific journals, 33 articles support the occurrence of three models: the portfolio model, with a mainly teaching-professional orientation; the thesis model, with a mainly…

Arsenic contamination in food chain: Thread to food security

Science.gov (United States)

Shekhar Azad Kashyap, Chandra; Singh, Swati

2017-04-01

The supply of good quality food is a necessity for economic and social health welfare of urban and rural population. Over the last several decades groundwater contamination in developing countries has assumed dangerous levels as a result millions of people are at risk. This is so particularly with respect to arsenic that has registered high concentration in groundwater in countries like India and Bangladesh. The arsenic content in groundwater varies from 10 to 780 µg/L, which is far above the levels for drinking water standards prescribed by World Health Organization (WHO). Currently arsenic has entered in food chain due to irrigation with arsenic contaminated water. In the present study reports the arsenic contamination in groundwater that is being used for irrigating paddy in Manipur and West Bengal. The arsenic content in irrigation water is 475 µg/L and 780 µg/L in Manipur and West Bengal, respectively. In order to assess the effect of such waters on the rice crop, we collected rice plant from Manipur and determined the arsenic content in roots, stem, and grain. The arsenic content in grain varies from 110 to 190 mg/kg while the limit of arsenic intake by humans is 10 mg/kg (WHO). This problem is not confine to the area, it spread global level, and rice being cultivated in these regions is export to the other countries like USA, Middle East and Europe and will be thread to global food security.

Design, Implementation and Testing of a Tiny Multi-Threaded DNS64 Server

Directory of Open Access Journals (Sweden)

Gábor Lencse

2016-03-01

Full Text Available DNS64 is going to be an important service (together with NAT64 in the upcoming years of the IPv6 transition enabling the clients having only IPv6 addresses to reach the servers having only IPv4 addresses (the majority of the servers on the Internet today. This paper describes the design, implementation and functional testing of MTD64, a flexible, easy to use, multi-threaded DNS64 proxy published as a free software under the GPLv2 license. All the theoretical background is introduced including the DNS message format, the operation of the DNS64 plus NAT64 solution and the construction of the IPv4-embedded IPv6 addresses. Our design decisions are fully disclosed from the high level ones to the details. Implementation is introduced at high level only as the details can be found in the developer documentation. The most important parts of a through functional testing are included as well as the results of some basic performance comparison with BIND.

Evaluation of replacement thread lubricants for red lead and graphite in mineral oil

Energy Technology Data Exchange (ETDEWEB)

Jungling, T.L.; Rauth, D.R.; Goldberg, D.

1998-04-30

Eight commercially available thread lubricants were evaluated to determine the best replacement for Red Lead and Graphite in Mineral Oil (RLGMO). The evaluation included coefficient of friction testing, high temperature anti-seizing testing, room temperature anti-galling testing, chemical analysis for detrimental impurities, corrosion testing, off-gas testing, and a review of health and environmental factors. The coefficient of friction testing covered a wide variety of factors including stud, nut, and washer materials, sizes, manufacturing methods, surface coatings, surface finishes, applied loads, run-in cycles, and relubrication. Only one lubricant, Dow Corning Molykote P37, met all the criteria established for a replacement lubricant. It has a coefficient of friction range similar to RLGMO. Therefore, it can be substituted directly for RLGMO without changing the currently specified fastener torque values for the sizes, materials and conditions evaluated. Other lubricants did not perform as well as Molykote P37 in one or more test or evaluation categories.

Implementation of the ATLAS trigger within the multi-threaded software framework AthenaMT

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00225867; The ATLAS collaboration

2017-01-01

We present an implementation of the ATLAS High Level Trigger, HLT, that provides parallel execution of trigger algorithms within the ATLAS multithreaded software framework, AthenaMT. This development will enable the ATLAS HLT to meet future challenges due to the evolution of computing hardware and upgrades of the Large Hadron Collider, LHC, and ATLAS Detector. During the LHC data-taking period starting in 2021, luminosity will reach up to three times the original design value. Luminosity will increase further, to up to 7.5 times the design value, in 2026 following LHC and ATLAS upgrades. This includes an upgrade of the ATLAS trigger architecture that will result in an increase in the HLT input rate by a factor of 4 to 10 compared to the current maximum rate of 100 kHz. The current ATLAS multiprocess framework, AthenaMP, manages a number of processes that each execute algorithms sequentially for different events. AthenaMT will provide a fully multi-threaded environment that will additionally enable concurrent ...

The Ethical Justification of the Thesis that Separates Law from Morality Through John Austin

Directory of Open Access Journals (Sweden)

Galvão Rabelo

2015-12-01

Full Text Available The british legal philosopher John Austin stands at the threshold of the evolution of the legal positivist tradition. His work, which dates back to the first half of the 19th century, was especially important to establish the basic elements of this school of legal understanding. Among his contributions to the legal positivist doctrine, lies the creation of the thesis that separates morality from law. Under an ethical context, however, John Austin was an ardent utilitarian who defended the use of the principle of utility as the only rational criteria for the unveiling of superior moral standards (divine laws. Considering both dimensions of his understanding, it has long been wondered if his utilitarian ethics have influenced, somehow, his legal theory, especially in regards to the separation thesis. Said thesis, which is in the center of the legal positivist tradition, has been interpreted in different ways in contemporary legal debate. A particular branch, called ethical positivism, opened new perspectives to the study of this tradition, defending the legal positivism theory as a morally satisfactory theoretical model for the contemporary legal systems. Hence, using the main premise of ethical positivism (which states that there are moral reasons to defend the separation thesis as an interprative and methodological tool, this paper plans on revisiting the link between John Austins legal and ethical convictions, in order to comprehend what were the moral reasons which led him to defend the separation of what law is and what it should be.

An Analysis of Written Feedback on a PhD Thesis

Science.gov (United States)

Kumar, Vijay; Stracke, Elke

2007-01-01

This paper offers an interim analysis of written feedback on a first draft of a PhD thesis. It first looks at two sources of data: in-text feedback and overall feedback. Looking at how language is used in its situational context, we then coded the feedback and developed a model for analysis based on three fundamental functions of speech:…

Science as an ally of religion: a Muslim appropriation of 'the conflict thesis'.

Science.gov (United States)

Yalcinkaya, M Alper

2011-06-01

John W. Draper's History of the Conflict between Religion and Science (1874) is commonly regarded as the manifesto of the 'conflict thesis'. The superficiality of this thesis has been demonstrated in recent studies, but to read Draper's work only as a text on 'science versus religion' is to miss half of its significance, as it also involved evaluations of individual religions with respect to their attitudes towards science. Due to Draper's favourable remarks on Islam, the Ottoman author Ahmed Midhat translated his work into Turkish, and published it along with his own comments on Draper's arguments. Midhat interpreted Islam using the cues provided by Draper, and portrayed it as the only religion compatible with science. While his Christian readers condemned Draper for his approach to Islam, Midhat transformed the 'conflict thesis' into a proclamation that Islam and science were allies in opposition to Christian encroachment on the Ottoman Empire. This paper analyses Midhat's appropriation of Draper's work and compares it to the reaction of Draper's Christian readers. It discusses the context that made an alliance between Islam and science so desirable for Midhat, and emphasizes the impact of the historico-geographical context on the encounters between and representations of science and religion.

Experimental Validation of an FSW Model with an Enhanced Friction Law: Application to a Threaded Cylindrical Pin Tool

Directory of Open Access Journals (Sweden)

Narges Dialami

2017-11-01

Full Text Available This work adopts a fast and accurate two-stage computational strategy for the analysis of FSW (Friction stir welding processes using threaded cylindrical pin tools. The coupled thermo-mechanical problem is equipped with an enhanced friction model to include the effect of non-uniform pressure distribution under the pin shoulder. The overall numerical strategy is successfully validated by the experimental measurements provided by the industrial partner (Sapa. The verification of the numerical model using the experimental evidence is not only accomplished in terms of temperature evolution but also in terms of torque, longitudinal, transversal and vertical forces.

Guide for thesis quality at CEA / Physical Sciences Division

International Nuclear Information System (INIS)

Renault, J.Ph.; Rotureau, P.; Skaza, F.; Lapoux, V.; Saas, St.; Nguyen, F.; Chaleard, C.; Thromat, N.; Pussieux, Th.; Duc, R.

2003-01-01

Thesis is a basic component of scientific research. It has to be successful, for the student whose future depends widely on it, as well as for the host laboratory awaiting a profitable return on investment. The present guide, dedicated to students and their managers, aims to lead them to success by implementing a customized Quality approach. That tool, built as following the DSM Quality referential, wants to be, like this latter one: 'Useful, Usable, Used'. (authors)

GaAsP solar cells on GaP/Si with low threading dislocation density

International Nuclear Information System (INIS)

Yaung, Kevin Nay; Vaisman, Michelle; Lang, Jordan; Lee, Minjoo Larry

2016-01-01

GaAsP on Si tandem cells represent a promising path towards achieving high efficiency while leveraging the Si solar knowledge base and low-cost infrastructure. However, dislocation densities exceeding 10"8 cm"−"2 in GaAsP cells on Si have historically hampered the efficiency of such approaches. Here, we report the achievement of low threading dislocation density values of 4.0–4.6 × 10"6 cm"−"2 in GaAsP solar cells on GaP/Si, comparable with more established metamorphic solar cells on GaAs. Our GaAsP solar cells on GaP/Si exhibit high open-circuit voltage and quantum efficiency, allowing them to significantly surpass the power conversion efficiency of previous devices. The results in this work show a realistic path towards dual-junction GaAsP on Si cells with efficiencies exceeding 30%.

Evaluation of the Structural Safety of a Vessel with Different Material(Cr-13)-Supplemented Screw Thread

Energy Technology Data Exchange (ETDEWEB)

Choi, Yong Hoon; Bae, Jun Ho; Kim, Chul [Pusan National University, Busan (Korea, Republic of)

2015-04-15

The dome and neck part of a vessel is generally formed by a hot spinning process with a seamless tube. However, as studies on and design data from the hot spinning process are insufficient, this process has been performed based on trial and error and the experiences of field engineers. Changes in the inner diameter from the bottom to the top of the neck have occurred mainly because of the characteristics of the hot spinning process due to the high-speed rotation of the rollers. In this study, a theoretical and finite element analysis of the vessel is conducted with different material(Cr-13)-supplemented screw threads for tapping and to reduce shape errors. Based on the results, the structural safety under the operating conditions is evaluated.

PACHE Trainee Spotlight: Roslyn Curry Featured on Thesis Thursday Radio Show

Science.gov (United States)

Roslyn Curry, a student at the University of Arizona (UA), was featured on a local radio program, Thesis Thursday, where she discussed her participation in the U54 PACHE Partnership for Native American Cancer Prevention (NACP) as a research trainee in Dr. William Montfort’s Lab at the University of Arizona Cancer Cente

Evaluability Assessment Thesis and Dissertation Studies in Graduate Professional Degree Programs

Science.gov (United States)

Walser, Tamara M.; Trevisan, Michael S.

2016-01-01

Evaluability assessment (EA) has potential as a design option for thesis and dissertation studies, serving as a practical training experience for both technical and nontechnical evaluation skills. Based on a content review of a sample of EA theses and dissertations from graduate professional degree programs, the authors of this article found that…