Design optimization and analysis of selected thermal devices using self-adaptive Jaya algorithm

International Nuclear Information System (INIS)

Rao, R.V.; More, K.C.

2017-01-01

Highlights: • Self-adaptive Jaya algorithm is proposed for optimal design of thermal devices. • Optimization of heat pipe, cooling tower, heat sink and thermo-acoustic prime mover is presented. • Results of the proposed algorithm are better than the other optimization techniques. • The proposed algorithm may be conveniently used for the optimization of other devices. - Abstract: The present study explores the use of an improved Jaya algorithm called self-adaptive Jaya algorithm for optimal design of selected thermal devices viz; heat pipe, cooling tower, honeycomb heat sink and thermo-acoustic prime mover. Four different optimization case studies of the selected thermal devices are presented. The researchers had attempted the same design problems in the past using niched pareto genetic algorithm (NPGA), response surface method (RSM), leap-frog optimization program with constraints (LFOPC) algorithm, teaching-learning based optimization (TLBO) algorithm, grenade explosion method (GEM) and multi-objective genetic algorithm (MOGA). The results achieved by using self-adaptive Jaya algorithm are compared with those achieved by using the NPGA, RSM, LFOPC, TLBO, GEM and MOGA algorithms. The self-adaptive Jaya algorithm is proved superior as compared to the other optimization methods in terms of the results, computational effort and function evalutions.

Energy at the Frontier: Low Carbon Energy System Transitions and Innovation in Four Prime Mover Countries

Science.gov (United States)

Araujo, Kathleen M.

All too often, discussion about the imperative to change national energy pathways revolves around long timescales and least cost economics of near-term energy alternatives. While both elements certainly matter, they don't fully reflect what can drive such development trajectories. This study explores national energy transitions by examining ways in which four prime mover countries of low carbon energy technology shifted away from fossil fuels, following the first global oil crisis of 1973. The research analyzes the role of readiness, sectoral contributions and adaptive policy in the scale-up and innovations of advanced, alternative energy technologies. Cases of Brazilian biofuels, Danish wind power, French nuclear power and Icelandic geothermal energy are analyzed for a period of four decades. Fundamentally, the research finds that significant change can occur in under 15 years; that technology complexity need not necessarily impede change; and that countries of different governance approaches and consumption levels can effectuate such transitions. This research also underscores that low carbon energy technologies may be adopted before they are competitive and then become competitive in the process. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs mit.edu)

Heat transfer in a thermoacoustic process

International Nuclear Information System (INIS)

Beke, Tamas

2012-01-01

Thermoacoustic instability is defined as the excitation of acoustic modes in chambers with heat sources due to the coupling between acoustic perturbations and unsteady heat addition. The major objective of this paper is to achieve accurate theoretical results in a thermoacoustic heat transfer process. We carry out a detailed heat transfer analysis aimed at determining the stability–instability border of the thermoacoustic system. In this paper, we present a project type of physical examination and modelling task. We employed an electrically heated Rijke tube in our thermoacoustic project work. The aim of our project is to help our students enlarge their knowledge about thermodynamics, mainly about thermoacoustics, and develop their applied information technology and mathematical skills. (paper)

Thermoacoustic refrigerator for space applications

Science.gov (United States)

Garrett, Steven L.; Adeff, Jay A.; Hofler, Thomas J.

1993-10-01

A new spacecraft cryocooler which uses resonant high-amplitude sound waves in inert gases to pump heat is described. The phasing of the thermoacoustic cycle is provided by thermal conduction. This 'natural' phasing allows the entire refrigerator to operate with only one moving part (the loudspeaker diaphragm). A space-qualified thermoacoustic refrigerator was flown on the Space Shuttle Discovery (STS-42) in January, 1992. It was entirely autonomous, had no sliding seals, required no lubrication, used mostly low-tolerance machined parts, and contained no expensive components. Thermoacoustics is shown to be a competitive candidate for food refrigerator/freezers and commercial/residential air conditioners. The design and performance of the Space Thermo/Acoustic Refrigerator (STAR) is described.

Sensitivity and Nonlinearity of Thermoacoustic Oscillations

Science.gov (United States)

Juniper, Matthew P.; Sujith, R. I.

2018-01-01

Nine decades of rocket engine and gas turbine development have shown that thermoacoustic oscillations are difficult to predict but can usually be eliminated with relatively small ad hoc design changes. These changes can, however, be ruinously expensive to devise. This review explains why linear and nonlinear thermoacoustic behavior is so sensitive to parameters such as operating point, fuel composition, and injector geometry. It shows how nonperiodic behavior arises in experiments and simulations and discusses how fluctuations in thermoacoustic systems with turbulent reacting flow, which are usually filtered or averaged out as noise, can reveal useful information. Finally, it proposes tools to exploit this sensitivity in the future: adjoint-based sensitivity analysis to optimize passive control designs and complex systems theory to warn of impending thermoacoustic oscillations and to identify the most sensitive elements of a thermoacoustic system.

Transmission eigenvalues and thermoacoustic tomography

International Nuclear Information System (INIS)

Finch, David; Hickmann, Kyle S

2013-01-01

The spectrum of the interior transmission problem is related to the unique determination of the acoustic properties of a body in thermoacoustic imaging. Under a non-trapping hypothesis, we show that sparsity of the interior transmission spectrum implies a range separation condition for the thermoacoustic operator. In odd dimensions greater than or equal to 3, we prove that the interior transmission spectrum for a pair of radially symmetric non-trapping sound speeds is countable, and conclude that the ranges of the associated thermoacoustic maps have only trivial intersection. (paper)

A single-reciprocating-piston two-phase thermofluidic prime-mover

International Nuclear Information System (INIS)

Taleb, Aly I.; Timmer, Michael A.G.; El-Shazly, Mohamed Y.; Samoilov, Aleksandr; Kirillov, Valeriy A.; Markides, Christos N.

2016-01-01

We explore theoretically a thermodynamic heat-engine concept that has the potential of attaining a high efficiency and power density relative to competing solutions, while having a simple construction with few moving parts and dynamic seals, allowing low capital and operating costs, and long lifetimes. Specifically, an unsteady heat-engine device within which a working fluid undergoes a power cycle featuring phase-change, termed the ‘Evaporative Reciprocating-Piston Engine’ (EPRE) is considered as a potential prime mover for use in combined heat and power (CHP) applications. Based on thermal/fluid-electrical analogies, a theoretical ERPE device is conceptualized initially in the electrical-analogy domain as a linearized, closed-loop active electronic circuit model. The circuit-model representation is designed to potentially exhibit high efficiencies compared to similar, existing two-phase unsteady heat engines. From the simplified circuit model in the electrical domain, and using the thermal/fluid-electrical analogies, one possible configuration of a corresponding physical ERPE device is derived, based on an early prototype of a device currently under development that exhibits some similarities with the ERPE, and used as a physical manifestation of the proposed concept. The corresponding physical ERPE device relies on the alternating phase change of a suitable working-fluid (here, water) to drive a reciprocating displacement of a single vertical piston and to produce sustained oscillations of thermodynamic properties within an enclosed space. Four performance indicators are considered: the operational frequency, the power output, the exergy efficiency, and the heat input/temperature difference imposed externally on the device's heat exchangers that is necessary to sustain oscillations. The effects of liquid inertia, viscous drag, hydrostatic pressure, vapour compressibility and two-phase heat transfer in the various engine components/compartments are

Review of investigations in eco-friendly thermoacoustic refrigeration system

Directory of Open Access Journals (Sweden)

Raut Ashish S.

2017-01-01

Full Text Available To reduce greenhouse gas emissions, internationally research and development is intended to improve the performance of conventional refrigeration system also growth of new-fangled refrigeration technology of potentially much lesser ecological impact. This paper gives brief review of research and development in thermoacoustic refrigeration also the existing situation of thermoacoustic refrigeration system. Thermoacoustic refrigerator is a novel sort of energy conversion equipment which converts acoustic power into heat energy by thermoacoustic effect. Thermoacoustic refrigeration is an emergent refrigeration technology in which there are no moving elements or any environmentally injurious refrigerants during its working. The concept of thermoacoustic refrigeration system is explained, the growth of thermoacoustic refrigeration, various investigations into thermoacoustic refrigeration system, various optimization techniques to improve coefficient of performance, different stacks and resonator tube designs to improve heat transfer rate, various gases, and other parameters like sound generation have been reviewed.

Physics of thermo-acoustic sound generation

Science.gov (United States)

Daschewski, M.; Boehm, R.; Prager, J.; Kreutzbruck, M.; Harrer, A.

2013-09-01

We present a generalized analytical model of thermo-acoustic sound generation based on the analysis of thermally induced energy density fluctuations and their propagation into the adjacent matter. The model provides exact analytical prediction of the sound pressure generated in fluids and solids; consequently, it can be applied to arbitrary thermal power sources such as thermophones, plasma firings, laser beams, and chemical reactions. Unlike existing approaches, our description also includes acoustic near-field effects and sound-field attenuation. Analytical results are compared with measurements of sound pressures generated by thermo-acoustic transducers in air for frequencies up to 1 MHz. The tested transducers consist of titanium and indium tin oxide coatings on quartz glass and polycarbonate substrates. The model reveals that thermo-acoustic efficiency increases linearly with the supplied thermal power and quadratically with thermal excitation frequency. Comparison of the efficiency of our thermo-acoustic transducers with those of piezoelectric-based airborne ultrasound transducers using impulse excitation showed comparable sound pressure values. The present results show that thermo-acoustic transducers can be applied as broadband, non-resonant, high-performance ultrasound sources.

High temperature thermoacoustic heat pump

Energy Technology Data Exchange (ETDEWEB)

Tijani, H.; Spoelstra, S. [Energy research Centre of the Netherlands, 1755 ZG Petten (Netherlands)

2012-06-15

Thermoacoustic technology can provide new types of heat pumps that can be deployed in different applications. A thermoacoustic heat pumps can for example be applied in dwellings to generate cooling or heating. Typically, space and water heating makes up about 60% of domestics and offices energy consumption. The application of heat pumps can contribute to achieve energy savings and environmental benefits by reducing CO2 and NOx emissions. This paper presents the study of a laboratory scale thermoacoustic-Stirling heat pump operating between 10C and 80C which can be applied in domestics and offices. The heat pump is driven by a thermoacoustic-Stirling engine. The experimental results show that the heat pump pumps 250 W of heat at 60C at a drive ratio of 3.6% and 200 W at 80C at a drive ratio of 3.5 %. The performance for both cases is about 40% of the Carnot performance. The design, construction, and performance measurements of the heat pump will be presented and discussed.

High Temperature Thermoacoustic Heat Pump

Energy Technology Data Exchange (ETDEWEB)

Tijani, H.; Spoelstra, S. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

2012-07-15

Thermoacoustic technology can provide new types of heat pumps that can be deployed in different applications. Thermoacoustic heat pumps can for example be applied in dwellings to generate cooling or heating. Typically, space and water heating makes up about 60% of domestic and office energy consumption. The application of heat pumps can contribute to achieve energy savings and environmental benefits by reducing CO2 and NOx emissions. This paper presents the study of a laboratory scale thermoacoustic-Stirling heat pump operating between 10C and 80C which can be applied in domestics and offices. The heat pump is driven by a thermoacoustic-Stirling engine. The experimental results show that the heat pump pumps 250 W of heat at 60C at a drive ratio of 3.6 % and 200 W at 80C at a drive ratio of 3.5 %. The performance for both cases is about 40% of the Carnot performance. The design, construction, and performance measurements of the heat pump will be presented and discussed.

A high performance thermoacoustic Stirling-engine

Energy Technology Data Exchange (ETDEWEB)

Tijani, M.E.H.; Spoelstra, S. [Energy research Centre of the Netherlands (ECN), PO Box 1, 1755 ZG Petten (Netherlands)

2011-11-10

In thermoacoustic systems heat is converted into acoustic energy and vice versa. These systems use inert gases as working medium and have no moving parts which makes the thermoacoustic technology a serious alternative to produce mechanical or electrical power, cooling power, and heating in a sustainable and environmentally friendly way. A thermoacoustic Stirling heat engine is designed and built which achieves a record performance of 49% of the Carnot efficiency. The design and performance of the engine is presented. The engine has no moving parts and is made up of few simple components.

Experimental study of the influence of different resonators on thermoacoustic conversion performance of a thermoacoustic-Stirling heat engine.

Science.gov (United States)

Luo, E C; Ling, H; Dai, W; Yu, G Y

2006-12-22

In this paper, an experimental study of the effect of the resonator shape on the performance of a traveling-wave thermoacoustic engine is presented. Two different resonators were tested in the thermoacoustic-Stirling heat. One resonator is an iso-diameter one, and the other is a tapered one. To have a reasonable comparison reference, we keep the same traveling-wave loop, the same resonant frequency and the same operating pressure. The experiment showed that the resonator shape has significant influence on the global performance of the thermoacoustic-Stirling heat engine. The tapered resonator gives much better performance than the iso-diameter resonator. The tapered resonator system achieved a maximum pressure ratio of about 1.3, a maximum net acoustical power output of about 450 W and a highest thermoacoustic efficiency of about 25%.

Divertor cassette movers prototypes for ITER

International Nuclear Information System (INIS)

Bogusch, E.; Batz, R.; Bieber, O.; Gottfried, R.; Cerdan, G.

1998-01-01

Following competitive tendering, in October 1996 Siemens was contracted by the European Commission to design and supply an assembly of four Divertor Cassette Movers Prototypes including the control and command systems for the movers proper. The assembly consisting of one Cassette Toroidal Mover (CTM), one Radial Mover Tractor (TRC), one Second Cassette Carrier (SCC), and one Radial Cassette Carrier (RCC) represents key components of the Divertor Test Platform at Brasimone, one of the seven large R+D projects for ITER. By detailed design, high-precision manufacturing and testing of these devices, Siemens contributed to the verification of an important task within the European R and D program towards ITER construction. Replacement of the divertor cassettes is a scheduled maintenance operation throughout the life of ITER. The successful fabrication and testing of the Divertor Cassette Movers Prototypes is all important milestone to verify this delicate operation. (authors)

Thermoacoustic magnetohydrodynamic electrical generator

International Nuclear Information System (INIS)

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1986-01-01

A thermoacoustic magnetohydrodynamic electrical generator is described comprising a magnet having a magnetic field, an elongate hollow housing containing an electrically conductive liquid and a thermoacoustic structure positioned in the liquid, heat exchange means thermally connected to the thermoacoustic structure for inducing the liquid to oscillate at an acoustic resonant frequency within the housing. The housing is positioned in the magnetic field and oriented such that the direction of the magnetic field and the direction of oscillatory motion of the liquid are substantially orthogonal to one another, first and second electrical conductor means connected to the liquid on opposite sides of the housing along an axis which is substantially orthogonal to both the direction of the magnetic field and the direction of oscillatory motion of the liquid, an alternating current output signal is generated in the conductor means at a frequency corresponding to the frequency of the oscillatory motion of the liquid

Co-registered photoacoustic, thermoacoustic, and ultrasound mouse imaging

Science.gov (United States)

Reinecke, Daniel R.; Kruger, Robert A.; Lam, Richard B.; DelRio, Stephen P.

2010-02-01

We have constructed and tested a prototype test bed that allows us to form 3D photoacoustic CT images using near-infrared (NIR) irradiation (700 - 900 nm), 3D thermoacoustic CT images using microwave irradiation (434 MHz), and 3D ultrasound images from a commercial ultrasound scanner. The device utilizes a vertically oriented, curved array to capture the photoacoustic and thermoacoustic data. In addition, an 8-MHz linear array fixed in a horizontal position provides the ultrasound data. The photoacoustic and thermoacoustic data sets are co-registered exactly because they use the same detector. The ultrasound data set requires only simple corrections to co-register its images. The photoacoustic, thermoacoustic, and ultrasound images of mouse anatomy reveal complementary anatomic information as they exploit different contrast mechanisms. The thermoacoustic images differentiate between muscle, fat and bone. The photoacoustic images reveal the hemoglobin distribution, which is localized predominantly in the vascular space. The ultrasound images provide detailed information about the bony structures. Superposition of all three images onto a co-registered hybrid image shows the potential of a trimodal photoacoustic-thermoacoustic-ultrasound small-animal imaging system.

Heat Transfer in a Thermoacoustic Process

Science.gov (United States)

Beke, Tamas

2012-01-01

Thermoacoustic instability is defined as the excitation of acoustic modes in chambers with heat sources due to the coupling between acoustic perturbations and unsteady heat addition. The major objective of this paper is to achieve accurate theoretical results in a thermoacoustic heat transfer process. We carry out a detailed heat transfer analysis…

Truck Thermoacoustic Generator and Chiller

Energy Technology Data Exchange (ETDEWEB)

Keolian, Robert

2011-03-31

This Final Report describes the accomplishments of the US Department of Energy (DOE) cooperative agreement project DE-FC26-04NT42113 - Truck Thermoacoustic Generator and Chiller - whose goal is to design, fabricate and test a thermoacoustic piezoelectric generator and chiller system for use on over-the-road heavy-duty-diesel trucks, driven alternatively by the waste heat of the main diesel engine exhaust or by a burner integrated into the thermoacoustic system. The thermoacoustic system would utilize engine exhaust waste heat to generate electricity and cab air conditioning, and would also function as an auxiliary power unit (APU) for idle reduction. The unit was to be tested in Volvo engine performance and endurance test cells and then integrated onto a Class 8 over-the-road heavy-duty-diesel truck for further testing on the road. The project has been a collaboration of The Pennsylvania State University Applied Research Laboratory, Los Alamos National Laboratory, Clean Power Resources Inc., and Volvo Powertrain (Mack Trucks Inc.). Cost share funding was provided by Applied Research Laboratory, and by Clean Power Resources Inc via its grant from Innovation Works - funding that was derived from the Commonwealth of Pennsylvania. Los Alamos received its funding separately through DOE Field Work Proposal 04EE09.

Modelling of thermoacoustic phenomena in an electrically heated Rijke tube

International Nuclear Information System (INIS)

Beke, Tamas

2010-01-01

Thermoacoustic instability plays an important role in various technical applications, for instance in jet or rocket motors, thermoacoustic engines, pulse combustors and industrial burners. The main objective of this paper is to present the theory of thermoacoustic oscillations, and for this purpose a Rijke-type thermal device was built. The Rijke tube is a simple device open at both ends with a mean airflow and a concentrated heat source (a heated wire grid). It serves as a convenient prototypical example to understand thermoacoustic effects since it is a simplified thermoacoustic resonator; once excited, under certain conditions, it is capable of creating a sustained sound when thermal energy is added. In this paper we present a project that includes physical measuring, examination and modelling. We have employed electrically heated Rijke tubes in our thermoacoustic school project work, and present a numerical algorithm to predict the transition to instability; in this model the effects of the main system parameters are demonstrated. The aim of our project is to help our students enhance their knowledge about thermoacoustics and develop their applied information technology skills.

Modelling of thermoacoustic phenomena in an electrically heated Rijke tube

Energy Technology Data Exchange (ETDEWEB)

Beke, Tamas, E-mail: tamasbe@gmail.co [Our Lady Catholic Institute, Kalocsa (Hungary)

2010-11-15

Thermoacoustic instability plays an important role in various technical applications, for instance in jet or rocket motors, thermoacoustic engines, pulse combustors and industrial burners. The main objective of this paper is to present the theory of thermoacoustic oscillations, and for this purpose a Rijke-type thermal device was built. The Rijke tube is a simple device open at both ends with a mean airflow and a concentrated heat source (a heated wire grid). It serves as a convenient prototypical example to understand thermoacoustic effects since it is a simplified thermoacoustic resonator; once excited, under certain conditions, it is capable of creating a sustained sound when thermal energy is added. In this paper we present a project that includes physical measuring, examination and modelling. We have employed electrically heated Rijke tubes in our thermoacoustic school project work, and present a numerical algorithm to predict the transition to instability; in this model the effects of the main system parameters are demonstrated. The aim of our project is to help our students enhance their knowledge about thermoacoustics and develop their applied information technology skills.

Thermoacoustic power systems for space applications

International Nuclear Information System (INIS)

Backhaus, S.N.; Tward, E.; Pedach, M.

2001-01-01

Future NASA deep-space missions will require radioisotope-powered electric generators that are just as reliable as current RTGs, but more efficient and of higher specific power (W/kg). Thermoacoustic engines can convert high-temperature heat into acoustic, or PV, power without moving parts at 30% efficiency. Consisting of only tubes and a few heat exchangers, these engines are low mass and promise to be highly reliable. Coupling a thermoacoustic engine to a low-mass, highly reliable and efficient linear alternator will create a heat-driven electric generator suitable for deep-space applications. Data will be presented on the first tests of a demonstration thermoacoustic engine designed for the 100-Watt power range.

Experimental investigation of a thermoacoustic-Stirling refrigerator driven by a thermoacoustic-Stirling heat engine.

Science.gov (United States)

Luo, E C; Dai, W; Zhang, Y; Ling, H

2006-12-22

In this paper, a thermally-driven thermoacoustic refrigerator system without any moving part is reported. This refrigeration system consists of a thermoacoustic-Stirling heat engine and a thermoacoustic-Stirling refrigerator; that is, the former is the driving source for the latter. Both the subsystems are designed to operate on traveling-wave mode. In the experiment, it was found that the DC-flows had significant negative effect on the heat engine and the refrigerator. To suppress these DC-flows, two flexible membranes were inserted into the two subsystems and worked very well. Then extensive experiments were made to test the influence of different parameters on refrigeration performance of the whole system. The system has so far achieved a no-load temperature of -65 degrees C, a cooling capacity of about 270 W at -20 degrees C and 405 W at 0 degrees C; in fact, the result showed a good prospect of the refrigeration system in room-temperature cooling such as food refrigeration and air-conditioning.

Passive control of thermoacoustic oscillations with adjoint methods

Science.gov (United States)

Aguilar, Jose; Juniper, Matthew

2017-11-01

Strict pollutant regulations are driving gas turbine manufacturers to develop devices that operate under lean premixed conditions, which produce less NOx but encourage thermoacoustic oscillations. These are a form of unstable combustion that arise due to the coupling between the acoustic field and the fluctuating heat release in a combustion chamber. In such devices, in which safety is paramount, thermoacoustic oscillations must be eliminated passively, rather than through feedback control. The ideal way to eliminate thermoacoustic oscillations is by subtly changing the shape of the device. To achieve this, one must calculate the sensitivity of each unstable thermoacoustic mode to every geometric parameter. This is prohibitively expensive with standard methods, but is relatively cheap with adjoint methods. In this study we first present low-order network models as a tool to model and study the thermoacoustic behaviour of combustion chambers. Then we compute the continuous adjoint equations and the sensitivities to relevant parameters. With this, we run an optimization routine that modifies the parameters in order to stabilize all the resonant modes of a laboratory combustor rig.

Theory and modeling of cylindrical thermo-acoustic transduction

Energy Technology Data Exchange (ETDEWEB)

Tong, Lihong, E-mail: lhtong@ecjtu.edu.cn [School of Civil Engineering and Architecture, East China Jiaotong University, Nanchang, Jiangxi (China); Lim, C.W. [Department of Architecture and Civil Engineering, City University of Hong Kong, Kowloon, Hong Kong SAR (China); Zhao, Xiushao; Geng, Daxing [School of Civil Engineering and Architecture, East China Jiaotong University, Nanchang, Jiangxi (China)

2016-06-03

Models both for solid and thinfilm-solid cylindrical thermo-acoustic transductions are proposed and the corresponding acoustic pressure solutions are obtained. The acoustic pressure for an individual carbon nanotube (CNT) as a function of input power is investigated analytically and it is verified by comparing with the published experimental data. Further numerical analysis on the acoustic pressure response and characteristics for varying input frequency and distance are also examined both for solid and thinfilm-solid cylindrical thermo-acoustic transductions. Through detailed theoretical and numerical studies on the acoustic pressure solution for thinfilm-solid cylindrical transduction, it is concluded that a solid with smaller thermal conductivity favors to improve the acoustic performance. In general, the proposed models are applicable to a variety of cylindrical thermo-acoustic devices performing in different gaseous media. - Highlights: • Theory and modeling both for solid and thinfilm-solid cylindrical thermo-acoustic transductions are proposed. • The modeling is verified by comparing with the published experimental data. • Acoustic response characteristics of cylindrical thermo-acoustic transductions are predicted by the proposed model.

Design of a low-cost thermoacoustic electricity generator and its experimental verification

Energy Technology Data Exchange (ETDEWEB)

Backhaus, Scott N [Los Alamos National Laboratory; Yu, Z [UNIV OF MANCHESTER; Jaworski, A J [UNIV OF MANCHESTER

2010-01-01

This paper describes the design and testing of a low cost thermoacoustic generator. A travelling-wave thermoacoustic engine with a configuration of a looped-tube resonator is designed and constructed to convert heat to acoustic power. A commercially available, low-cost loudspeaker is adopted as the alternator to convert the engine's acoustic power to electricity. The whole system is designed using linear thermoacoustic theory. The optimization of different parts of the thermoacoustic generator, as well as the matching between the thermoacoustic engine and the alternator are discussed in detail. A detailed comparison between the preliminary test results and linear thermoacoustic predictions is provided.

Modelling of Thermoacoustic Phenomena in an Electrically Heated Rijke Tube

Science.gov (United States)

Beke, Tamas

2010-01-01

Thermoacoustic instability plays an important role in various technical applications, for instance in jet or rocket motors, thermoacoustic engines, pulse combustors and industrial burners. The main objective of this paper is to present the theory of thermoacoustic oscillations, and for this purpose a Rijke-type thermal device was built. The Rijke…

Experimental Evaluation of Performance of Constant Power Prime-Mover Driven Isolated 3-φ SEIG for Pico-Hydro Power Generation System in Remote Mountainous Region of Himalayas

Directory of Open Access Journals (Sweden)

Rathore Umesh C.

2016-01-01

Full Text Available This paper presents the experimental evaluation of the performance of 3-φ self-excited induction generator (SEIG suitable for pico-hydro power generation system feeding domestic load in remote mountainous region. The use of induction generators is most suitable for renewable energy conversion systems due to their enormous advantages over conventional synchronous generators. Important features of induction generators include the simplicity in construction, ruggedness, simplified control, ease in maintenance and small size per generated kW. The performance characteristics of 3-φ SEIG feeding isolated load are evaluated using MATLAB-Simulink model based on the prevalent renewable energy sources inputs and loading conditions in mountainous terrain of Himalayas. The results are validated using an experimental set-up comprising of 3-φ, 3 HP induction motor run as 3- φ induction generator driven by 5HP, 4-pole DC shunt motor acting as prime-mover.

Coincident effect characteristic in a thermoacoustic regenerator

International Nuclear Information System (INIS)

Liu Yicai; Xin Tianlong; Huang Qian; Shi Xiangnan; Chen Siming; Chen Lixin

2011-01-01

Many previous studies on characteristics of thermoacoustic regenerator are based on fluid micro-groups and their compression-expansion cycle. In this paper, coincident frequency is introduced to evaluate its acoustic characteristics by combining structural acoustic with structural vibration theories. The relationship among structure wave radiation and regenerator position, slab thickness, and properties of material are analyzed by numerical calculation. The results show that in the low-frequency thermoacoustic system, the coincident effect generated by higher frequency wave weakens the fundamental sound wave. While in the high-frequency thermoacoustic system, where the oscillating fundamental frequency is higher than the coincident frequency, the sound field strength is enhanced by stronger structure wave radiation because of the coincident effect.

A linearly-acting variable-reluctance generator for thermoacoustic engines

International Nuclear Information System (INIS)

Hail, Claudio U.; Knodel, Philip C.; Lang, Jeffrey H.; Brisson, John G.

2015-01-01

Highlights: • A new design for a linear alternator for thermoacoustic power converters is presented. • A theoretical and semi-empirical model of the generator is developed and validated. • The variable-reluctance generator’s performance is experimentally characterized. • Scaling to higher frequency suggests efficient operation with thermoacoustic engines. - Abstract: A crucial element in a thermoacoustic power converter for reliable small-scale power generation applications is an efficient acoustic-to-electric energy converter. In this work, an acoustic-to-electric transducer for application with a back-to-back standing wave thermoacoustic engine, based on a linearly-acting variable-reluctance generator is proposed, built and experimentally tested. Static and dynamic experiments are performed on one side of the generator on a shaker table at 60 Hz with 5 mm peak-to-peak displacement for performance characterization. A theoretical and empirical model of the variable-reluctance generator are presented and validated with experimental data. A frequency scaling based on the empirical model indicates that a maximum power output of 84 W at 78% generator efficiency is feasible at the thermoacoustic engine’s operating frequency of 250 Hz, not considering power electronic losses. This suggests that the linearly-acting variable-reluctance generator can efficiently convert high frequency small amplitude acoustic oscillations to useful electricity and thus enables its integration into a thermoacoustic power converter

The role of thermoacoustics in the world of commercial cooling

Science.gov (United States)

Corey, John A.

2005-09-01

The science of thermoacoustics has been with us for nearly 30 years, but as yet few applications have made their way to the marketplace. Acoustic Stirling cryocoolers (also called pulse-tube Stirling or high-frequency pulse-tube coolers) have been the most successful commercial thermoacoustic devices, because they address a region of the cooling market in terms of temperature and cooling power that is not well served by existing technology. This talk will explore how thermoacoustics might fare in attempting to compete with existing technologies in refrigeration and air conditioning, what niche markets make the most sense as entry points, and how thermoacoustics compares to conventional (kinematic or free-piston) Stirling machines. In particular, why there are relatively few commercial Stirling devices in the marketplace (although Stirling cycle machines have been around for over 150 years) will be discussed, and what lessons learned with Stirlings are applicable to thermoacoustics.

Thermoacoustic emission induced by deeply-penetrating radiation and its application to biomedical imaging

International Nuclear Information System (INIS)

Liew, Soo Chin.

1989-01-01

Thermoacoustic emissions induced by 2450 MHz microwave pulses in water, tissue-simulating phantoms and dog kidneys have been detected. The analytic signal magnitude has been employed in generating A-mode images with excellent depth resolution. Thermoacoustic emissions have also been detected from the dose-gradient at the beam edges of a 4 MeV x-ray beam in water. These results establish the feasibility of employing thermoacoustic signals in generating diagnostic images, and in locating x-ray beam edges during radiation therapy. A theoretical model for thermoacoustic imaging using a directional transducer has been developed, which may be used in the design of future thermoacoustic imaging system, and in facilitating comparisons with other types of imaging systems. A method of characterizing biological tissues has been proposed, which relates the power spectrum of the detected thermoacoustic signals to the autocorrelation function of the thermoacoustic source distribution in the tissues. The temperature dependence of acoustic signals induced by microwave pulses in water has been investigated. A microwave-induced thermoacoustic source capable of launching large aperture, unipolar ultrasonic plane wave pulses in water has been constructed

Performance Comparison of Permanent Magnet Linear Actuators of Different Mover Types

DEFF Research Database (Denmark)

Ritchie, Ewen; Hinov, K.; Yatchev, I.

2006-01-01

A comparative study of permanent magnet linear actuators with different location of the permanent magnet is reported. Three mover types are considered - soft magnetic mover, permanent magnet mover and hybrid mover. Force-stroke characteristics are obtained with the help of finite element models...

Thermoacoustics of solids: A pathway to solid state engines and refrigerators

Science.gov (United States)

Hao, Haitian; Scalo, Carlo; Sen, Mihir; Semperlotti, Fabio

2018-01-01

Thermoacoustic oscillations have been one of the most exciting discoveries of the physics of fluids in the 19th century. Since its inception, scientists have formulated a comprehensive theoretical explanation of the basic phenomenon which has later found several practical applications to engineering devices. To date, all studies have concentrated on the thermoacoustics of fluid media where this fascinating mechanism was exclusively believed to exist. Our study shows theoretical and numerical evidence of the existence of thermoacoustic instabilities in solid media. Although the underlying physical mechanism exhibits some interesting similarities with its counterpart in fluids, the theoretical framework highlights relevant differences that have important implications on the ability to trigger and sustain the thermoacoustic response. This mechanism could pave the way to the development of highly robust and reliable solid-state thermoacoustic engines and refrigerators.

Traveling-Wave Thermoacoustic Engines With Internal Combustion

Science.gov (United States)

Weiland, Nathan Thomas; Zinn, Ben T.; Swift, Gregory William

2004-05-11

Thermoacoustic devices are disclosed wherein, for some embodiments, a combustion zone provides heat to a regenerator using a mean flow of compressible fluid. In other embodiments, burning of a combustible mixture within the combustion zone is pulsed in phase with the acoustic pressure oscillations to increase acoustic power output. In an example embodiment, the combustion zone and the regenerator are thermally insulated from other components within the thermoacoustic device.

Evaluation of thermal efficiency and energy conversion of thermoacoustic Stirling engines

International Nuclear Information System (INIS)

Zhong Junhu; Zheng Yuli; Qing Li; Qiang Li

2010-01-01

Thermodynamic cycle transferring heat and work was executed in thermoacoustic engines, when the acoustic resonators substituted the moving mechanical components of the traditional heat engines. Based on the traveling-wave phasing and reversible heat transfer, thermoacoustic Stirling engines could achieve 70% of the Carnot efficiency theoretically, if the inevitable viscous dissipation in resonators was also counted as exported power. It should be pointed out an error on this efficiency evaluation in the previous literatures. More than 70% of the acoustic power production was often consumed by the side-branch resonator that was the essential configuration to build up a thermoacoustic Stirling engine. According to the simulation results and some experimental data, the actual available acoustic power consumed by the acoustic loads was restricted by the operating peak-to-mean pressure ratio, i.e. |p 1 /p m |. When the peak-to-mean pressure ratio operated on 4-6.5%, the thermal efficiency and power density of the available acoustic power reached higher levels. But the available acoustic power would approach zero when |p 1 /p m | attained 10%. It was approved that the turbulence oscillation occurred on the higher |p 1 /p m | (usually >4%) was the main reason of the excess dissipation in the side-branch resonator. This character of the available power limited the wide application of thermoacoustic Stirling engines. The evaluation of thermal efficiency and energy conversion also indicated the improving direction of thermoacoustic Stirling engines. Generators driven by the thermoacoustic Stirling engines were an effective way, due to the elimination of the side-branch resonator. To achieve a high power density and a high pressure ratio on the higher available power efficiency level, the standing-wave thermoacoustic engines might outvie the traveling-wave thermoacoustic engines. To enjoy the best features of standing-wave engines and traveling-wave engines simultaneously

Review on the conversion of thermoacoustic power into electricity.

Science.gov (United States)

Timmer, Michael A G; de Blok, Kees; van der Meer, Theo H

2018-02-01

Thermoacoustic engines convert heat energy into high amplitude acoustic waves and subsequently into electric power. This article provides a review of the four main methods to convert the (thermo)acoustic power into electricity. First, loudspeakers and linear alternators are discussed in a section on electromagnetic devices. This is followed by sections on piezoelectric transducers, magnetohydrodynamic generators, and bidirectional turbines. Each segment provides a literature review of the given technology for the field of thermoacoustics, focusing on possible configurations, operating characteristics, output performance, and analytical and numerical methods to study the devices. This information is used as an input to discuss the performance and feasibility of each method, and to identify challenges that should be overcome for a more successful implementation in thermoacoustic engines. The work is concluded by a comparison of the four technologies, concentrating on the possible areas of application, the conversion efficiency, maximum electrical power output and more generally the suggested focus for future work in the field.

Estimated Emissions from the Prime-Movers of Unconventional Natural Gas Well Development Using Recently Collected In-Use Data in the United States.

Science.gov (United States)

Johnson, Derek; Heltzel, Robert; Nix, Andrew; Darzi, Mahdi; Oliver, Dakota

2018-05-01

Natural gas from shale plays dominates new production and growth. However, unconventional well development is an energy intensive process. The prime movers, which include over-the-road service trucks, horizontal drilling rigs, and hydraulic fracturing pumps, are predominately powered by diesel engines that impact air quality. Instead of relying on certification data or outdated emission factors, this model uses new in-use emissions and activity data combined with historical literature to develop a national emissions inventory. For the diesel only case, hydraulic fracturing engines produced the most NO x emissions, while drilling engines produced the most CO emissions, and truck engines produced the most THC emissions. By implementing dual-fuel and dedicated natural gas engines, total fuel energy consumed, CO 2 , CO, THC, and CH 4 emissions would increase, while NO x emissions, diesel fuel consumption, and fuel costs would decrease. Dedicated natural gas engines offered significant reductions in NO x emissions. Additional scenarios examined extreme cases of full fleet conversions. While deep market penetrations could reduce fuel costs, both technologies could significantly increase CH 4 emissions. While this model is based on a small sample size of engine configurations, data were collected during real in-use activity and is representative of real world activity.

Optimizing the Thermoacoustic Pulse Tube Refrigerator Performances

Directory of Open Access Journals (Sweden)

E. V. Blagin

2014-01-01

Full Text Available The article deals with research and optimization of the thermoacoustic pulse tube refrigerator to reach a cryogenic temperature level. The refrigerator is considered as a thermoacoustic converter based on the modified Stirling cycle with helium working fluid. A sound pressure generator runs as a compressor. Plant model comprises an inner heat exchanger, a regenerative heat exchanger, a pulse tube, hot and cold heat exchangers at its ends, an inertial tube with the throttle, and a reservoir. A model to calculate the pulse tube thermoacoustic refrigerator using the DeltaEC software package has been developed to be a basis for calculation techniques of the pulse tube refrigerator. Momentum, continuity, and energy equations for helium refrigerant are solved according to calculation algorithm taking into account the porosity of regenerator and heat exchangers. Optimization of the main geometric parameters resulted in decreasing temperature of cold heat exchanger by 41,7 K. After optimization this value became equal to 115,01 K. The following parameters have been optimized: diameters of the feeding and pulse tube and heat exchangers, regenerator, lengths of the regenerator and pulse and inertial tubes, as well as initial pressure. Besides, global minimum of temperatures has been searched at a point of local minima corresponding to the optimal values of abovementioned parameters. A global-local minima difference is 0,1%. Optimized geometric and working parameters of the thermoacoustic pulse tube refrigerator are presented.

Design of numerical model for thermoacoustic devices using OpenFOAM

Science.gov (United States)

Tisovsky, Tomas; Vit, Tomas

2017-09-01

Thermoacoustic devices are increasingly popular especially because of their construction simplicity and the ability to easily convert waste heat into the form of usable energy. Aim of this paper is to introduce some of the effective procedures for creating a complex mathematical model of thermoacoustic devices in OpenFOAM.

Hybrid vehicle powertrain system with power take-off driven vehicle accessory

Science.gov (United States)

Beaty, Kevin D.; Bockelmann, Thomas R.; Zou, Zhanijang; Hope, Mark E.; Kang, Xiaosong; Carpenter, Jeffrey L.

2006-09-12

A hybrid vehicle powertrain system includes a first prime mover, a first prime mover driven power transmission mechanism having a power take-off adapted to drive a vehicle accessory, and a second prime mover. The second prime mover is operable to drive the power transmission mechanism alone or in combination with the first prime mover to provide power to the power take-off through the power transmission mechanism. The invention further includes methods for operating a hybrid vehicle powertrain system.

Forced synchronization and asynchronous quenching in a thermo-acoustic system

Science.gov (United States)

Mondal, Sirshendu; Pawar, Samadhan A.; Sujith, Raman

2017-11-01

Forced synchronization, which has been extensively studied in theory and experiments, occurs through two different mechanisms known as phase locking and asynchronous quenching. The latter indicates the suppression of oscillation amplitude. In most practical combustion systems such as gas turbine engines, the main concern is high amplitude pressure oscillations, known as thermo-acoustic instability. Thermo-acoustic instability is undesirable and needs to be suppressed because of its damaging consequences to an engine. In the present study, a systematic experimental investigation of forced synchronization is performed in a prototypical thermo-acoustic system, a Rijke tube, in its limit cycle operation. Further, we show a qualitatively similar behavior using a reduced order model. In the phase locking region, the simultaneous occurrence of synchronization and resonant amplification leads to high amplitude pressure oscillations. However, a reduction in the amplitude of natural oscillations by about 78% of the unforced amplitude is observed when the forcing frequency is far lower than the natural frequency. This shows the possibility of suppression of the oscillation amplitude through asynchronous quenching in thermo-acoustic systems.

Acoustic field characteristics and performance analysis of a looped travelling-wave thermoacoustic refrigerator

International Nuclear Information System (INIS)

Jin, T.; Yang, R.; Wang, Y.; Feng, Y.; Tang, K.

2016-01-01

Highlights: • Key issues for a highly efficient thermoacoustic conversion are analyzed. • A looped thermoacoustic refrigerator with one engine stage and one refrigerator stage is proposed. • Effective refrigeration powered by heat sources below 250 °C is demonstrated in the simulation. • Impact of cooling/heating temperatures on system performance is analyzed in view of acoustic field. - Abstract: This paper focuses on a looped travelling-wave thermoacoustic refrigerator powered by thermal energy. Based on a simplified model for the regenerator, key issues for a highly efficient thermoacoustic conversion, including both thermal-to-acoustic and heat-pumping processes, are summarized. A looped travelling-wave thermoacoustic refrigerator with one engine stage and one refrigerator stage is proposed, with emphasis on high normalized acoustic impedance, sufficient volumetric velocity and appropriate phase relation close to travelling wave in the regenerators of both engine and refrigerator. Simulation results indicate that for the ambient temperature of 30 °C, the looped travelling-wave thermoacoustic refrigerator can be powered by the heat at 210–250 °C to achieve the refrigeration at −3 °C with the overall coefficient of performance above 0.4 and the relative Carnot coefficient of performance over 13%. The characteristics of the acoustic field inside the loop configuration are analyzed in detail to reveal the operation mechanism of the looped travelling-wave thermoacoustic refrigerator. Additional analyses are conducted on the impact of the cooling and the heating temperatures, which are of great concern to the refrigeration applications and the utilization of low-grade thermal energy.

Prime Mover

DEFF Research Database (Denmark)

Wagner, Michael Frederik

2002-01-01

The important issue of technological determinism is analysed in relation to various theoretical positions, and it is highlighted with a chain of empirical cases drawn form history. The fundamental questions to be considered is the nature of determinism in Karl Marx' philosophical work...

Open-loop control of quasiperiodic thermoacoustic oscillations

Science.gov (United States)

Guan, Yu; Gupta, Vikrant; Kashinath, Karthik; Li, Larry K. B.

2017-11-01

The open-loop application of periodic acoustic forcing has been shown to be a potentially effective strategy for controlling periodic thermoacoustic oscillations, but its effectiveness on aperiodic thermoacoustic oscillations is less clear. In this experimental study, we apply periodic acoustic forcing to a ducted premixed flame oscillating quasiperiodically at two incommensurate natural frequencies, f1 and f2. We find that (i) above a critical forcing amplitude, the system locks into the forcing by oscillating only at the forcing frequency ff, producing a closed periodic orbit in phase space with no evidence of the original T2 torus attractor; (ii) the critical forcing amplitude required for lock-in decreases as ff approaches either f1 or f2, resulting in characteristic ∨-shaped lock-in boundaries around the two natural modes; and (iii) for a wide range of forcing frequencies, the system's oscillation amplitude can be reduced to less than 20% of that of the unforced system. These findings show that the open-loop application of periodic acoustic forcing can be an effective strategy for controlling aperiodic thermoacoustic oscillations. This work was supported by the Research Grants Council of Hong Kong (Project No. 16235716 and 26202815).

Residential mobility in early childhood: Household and neighborhood characteristics of movers and non-movers

Directory of Open Access Journals (Sweden)

Elizabeth Lawrence

2015-11-01

Full Text Available Background: Understanding residential mobility in early childhood is important for contextualizing influences on child health and well-being. Objective: This study describes individual, household, and neighborhood characteristics associated with residential mobility for children aged 0-5. Methods: We examined longitudinal data from the Early Childhood Longitudinal Study-Birth Cohort (ECLS-B, a nationally representative sample of children born in 2001. Frequencies described the prevalence of characteristics for four waves of data and adjusted Wald tests compared means. Results: Moving was common for these families with young children, as nearly three-quarters of children moved at least once. Movers transitioned to neighborhoods with residents of higher socioeconomic status but experienced no improved household socioeconomic position relative to non-movers. Conclusions: Both the high prevalence and unique implications of early childhood residential mobility suggest the need for further research.

A multi-stage traveling-wave thermoacoustically-driven refrigeration system operating at liquefied natural gas temperature

Science.gov (United States)

Luo, K.; Sun, D. M.; Zhang, J.; Shen, Q.; Zhang, N.

2017-12-01

This study proposes a multi-stage travelling-wave thermoacoustically refrigeration system (TAD-RS) operating at liquefied natural gas temperature, which consists of two thermoacoustic engines (TAE) and one thermoacoustic refrigerator (TAR) in a closed-loop configuration. Three thermoacoustic units connect each other through a resonance tube of small cross-sectional area, achieving “self-matching” for efficient thermoacoustic conversion. Based on the linear thermoacoustic theory, a model of the proposed system has been built by using DeltaEC program to show the acoustic field characteristics and performance. It is shown that with pressurized 5 MPa helium as working gas, the TAEs are able to build a stable and strong acoustic field with a frequency of about 85 Hz. When hot end temperature reaches 923 K, this system can provide about 1410 W cooling power at 110 K with an overall exergy efficiency of 15.5%. This study indicates a great application prospect of TAD-RS in the field of natural gas liquefaction with a large cooling capacity and simple structure.

Performance measurement of a mini thermoacoustic refrigerator and associated drivers

OpenAIRE

Petrina, Denys E.

2002-01-01

Approved for public release; distribution is unlimited A miniature Thermoacoustic refrigerator is being developed to cool integrated circuits - which must sometimes operate at high temperatures nearing the upper threshold of their tolerance - to temperature spans more within the circuits' tolerable limits, without the need of the chemicals of a traditional refrigerating system. The development of an electrically powered acoustic driver that powers the thermoacoustic refrigerator is describ...

Method of determination of thermo-acoustic coolant instability boundaries in reactor core at NPPs with WWER

International Nuclear Information System (INIS)

Skalozubov, Volodymyr; Kolykhanov, Viktor; Kovryzhkin, Yuriy

2007-01-01

The regulatory body of Ukraine, the National Atomic Energy Company and the Scientific and Production Centre have led team-works concerned with previously unstudied factors or phenomena affecting reactor safety. As a result it is determined that the thermo-acoustic coolant instability conditions can appear in the core at definite operating WWER regimes. Considerable cyclic dynamic loads affect fuel claddings over thermo-acoustic pressure oscillations. These loads can result in inadmissible cassette design damage and containment damage. Taking into account calculation and experimental research authors submit a method of on-line assessment of WWER core state concerning thermo-acoustic coolant instability. According to this method, the thermo-acoustic coolant instability appearance conditions can be estimated using normal registered parameters (pressure, temperature, heat demand etc.). At operative modes, a WWER-1000 core is stable to tracheotomies oscillations, but reduction of coolant discharge through the core for some times can result in thermo-acoustic coolant instability. Thermo-acoustic instability appears at separate transitional modes concerned with reactor scram and unloading/loading at all power units. When thermo-acoustic instability begins in transitional modes, core elements are under influence of high-frequency coolant pressure pulsations for a long time (tens of hours)

Remote controlled mover for disposal canister transfer

International Nuclear Information System (INIS)

Suikki, M.

2013-10-01

This working report is an update for an earlier automatic guided vehicle design (Pietikaeinen 2003). The short horizontal transfers of disposal canisters manufactured in the encapsulation process are conducted with remote controlled movers both in the encapsulation plant and in the underground areas at the canister loading station of the disposal facility. The canister mover is a remote controlled transfer vehicle mobile on wheels. The handling of canisters is conducted with the assistance of transport platforms (pallets). The very small automatic guided vehicle of the earlier design was replaced with a commercial type mover. The most important reasons for this being the increased loadbearing requirement and the simpler, proven technology of the vehicle. The larger size of the vehicle induced changes to the plant layouts and in the principles for dealing with fault conditions. The selected mover is a vehicle, which is normally operated from alongside. In this application, the vehicle steering technology must be remote controlled. In addition, the area utilization must be as efficient as possible. This is why the vehicle was downsized in its outer dimensions and supplemented with certain auxiliary equipment and structures. This enables both remote controlled operation and improves the vehicle in terms of its failure tolerance. Operation of the vehicle was subjected to a risk analysis (PFMEA) and to a separate additional calculation conserning possible canister toppling risks. The total cost estimate, without value added tax for manufacturing the system amounts to 730 000 euros. (orig.)

Remote controlled mover for disposal canister transfer

Energy Technology Data Exchange (ETDEWEB)

Suikki, M. [Optimik Oy, Turku (Finland)

2013-10-15

This working report is an update for an earlier automatic guided vehicle design (Pietikaeinen 2003). The short horizontal transfers of disposal canisters manufactured in the encapsulation process are conducted with remote controlled movers both in the encapsulation plant and in the underground areas at the canister loading station of the disposal facility. The canister mover is a remote controlled transfer vehicle mobile on wheels. The handling of canisters is conducted with the assistance of transport platforms (pallets). The very small automatic guided vehicle of the earlier design was replaced with a commercial type mover. The most important reasons for this being the increased loadbearing requirement and the simpler, proven technology of the vehicle. The larger size of the vehicle induced changes to the plant layouts and in the principles for dealing with fault conditions. The selected mover is a vehicle, which is normally operated from alongside. In this application, the vehicle steering technology must be remote controlled. In addition, the area utilization must be as efficient as possible. This is why the vehicle was downsized in its outer dimensions and supplemented with certain auxiliary equipment and structures. This enables both remote controlled operation and improves the vehicle in terms of its failure tolerance. Operation of the vehicle was subjected to a risk analysis (PFMEA) and to a separate additional calculation conserning possible canister toppling risks. The total cost estimate, without value added tax for manufacturing the system amounts to 730 000 euros. (orig.)

A Thermoacoustic Model for High Aspect Ratio Nanostructures

Directory of Open Access Journals (Sweden)

Masoud S. Loeian

2016-09-01

Full Text Available In this paper, we have developed a new thermoacoustic model for predicting the resonance frequency and quality factors of one-dimensional (1D nanoresonators. Considering a nanoresonator as a fix-free Bernoulli-Euler cantilever, an analytical model has been developed to show the influence of material and geometrical properties of 1D nanoresonators on their mechanical response without any damping. Diameter and elastic modulus have a direct relationship and length has an inverse relationship on the strain energy and stress at the clamp end of the nanoresonator. A thermoacoustic multiphysics COMSOL model has been elaborated to simulate the frequency response of vibrating 1D nanoresonators in air. The results are an excellent match with experimental data from independently published literature reports, and the results of this model are consistent with the analytical model. Considering the air and thermal damping in the thermoacoustic model, the quality factor of a nanowire has been estimated and the results show that zinc oxide (ZnO and silver-gallium (Ag2Ga nanoresonators are potential candidates as nanoresonators, nanoactuators, and for scanning probe microscopy applications.

Exergetic optimization of a thermoacoustic engine using the particle swarm optimization method

International Nuclear Information System (INIS)

Chaitou, Hussein; Nika, Philippe

2012-01-01

Highlights: ► Optimization of a thermoacoustic engine using the particle swarm optimization method. ► Exergetic efficiency, acoustic power and their product are the optimized functions. ► PSO method is used successfully for the first time in the TA research. ► The powerful PSO tool is advised to be more involved in the TA research and design. ► EE times AP optimized function is highly recommended to design any new TA devices. - Abstract: Thermoacoustic engines convert heat energy into acoustic energy. Then, the acoustic energy can be used to pump heat or to generate electricity. It is well-known that the acoustic energy and therefore the exergetic efficiency depend on parameters such as the stack’s hydraulic radius, the stack’s position in the resonator and the traveling–standing-wave ratio. In this paper, these three parameters are investigated in order to study and analyze the best value of the produced acoustic energy, the exergetic efficiency and the product of the acoustic energy by the exergetic efficiency of a thermoacoustic engine with a parallel-plate stack. The dimensionless expressions of the thermoacoustic equations are derived and calculated. Then, the Particle Swarm Optimization method (PSO) is introduced and used for the first time in the thermoacoustic research. The use of the PSO method and the optimization of the acoustic energy multiplied by the exergetic efficiency are novel contributions to this domain of research. This paper discusses some significant conclusions which are useful for the design of new thermoacoustic engines.

Control of thermoacoustic instability with a drum-like silencer

Science.gov (United States)

Zhang, Guangyu; Wang, Xiaoyu; Li, Lei; Jing, Xiaodong; Sun, Xiaofeng

2017-10-01

Theoretical investigation is carried out by a novel method of controlling thermoacoustic instability with a drum-like silencer. It is shown that by decreasing the frequency of thermoacoustic system, the instability can be suppressed with the help of drum-like silencer. The purely reactive silencer, which is composed of a flexible membrane and a backing cavity, is usually known as a noise control device that works effectively in low frequency bandwidth without any aerodynamic loss. In present research, the silencer is exploited in a Rijke tube, as a means of decreasing the natural frequency of the system, and consequently changing the resonance period of the system. The "transfer element method" (TEM) is used to consider the interactions between the acoustic waves and the flexible membranes of the silencer. The effects of all possible properties of the silencer on the growth rate and resonance frequency of the thermoacoustic system are explored. According to the calculation results, it is found that for some properties of the silencer, the resonance frequencies are greatly decreased and then the phase difference between the unsteady heat release and the pressure fluctuation is increased. Consequently, the instability is suppressed with some dissipation that can not be able to control its onset in the original system. Therefore, when the damping is low, but not zero, it is effective to control thermoacoustic instability with this technique.

A one-dimensional heat transfer model for parallel-plate thermoacoustic heat exchangers.

Science.gov (United States)

de Jong, J A; Wijnant, Y H; de Boer, A

2014-03-01

A one-dimensional (1D) laminar oscillating flow heat transfer model is derived and applied to parallel-plate thermoacoustic heat exchangers. The model can be used to estimate the heat transfer from the solid wall to the acoustic medium, which is required for the heat input/output of thermoacoustic systems. The model is implementable in existing (quasi-)1D thermoacoustic codes, such as DeltaEC. Examples of generated results show good agreement with literature results. The model allows for arbitrary wave phasing; however, it is shown that the wave phasing does not significantly influence the heat transfer.

Development of a 3 kW double-acting thermoacoustic Stirling electric generator

International Nuclear Information System (INIS)

Wu, Zhanghua; Yu, Guoyao; Zhang, Limin; Dai, Wei; Luo, Ercang

2014-01-01

Highlights: • A 3 kW double-acting thermoacoustic Stirling electric generator is introduced. • 1.57 kW electric power with 16.8% thermal-to-electric efficiency was achieved. • High mechanical damping coefficient greatly decreases the system performance. • Performance difference is significant, which also decreased system performance. - Abstract: In this paper, a double-acting thermoacoustic Stirling electric generator is proposed as a new device capable of converting external heat into electric power. In the system, at least three thermoacoustic Stirling heat engines and three linear alternators are used to build a multiple-cylinder electricity generator. In comparison with the conventional thermoacoustic electricity generation system, the double-acting thermoacoustic Stirling electric generator has advantages on efficiency, power density and power capacity. In order to verify the idea, a prototype of 3 kW three-cylinder double-acting thermoacoustic Stirling electric generator is designed, built and tested. Based on the classic thermoacoustic theory, numerical simulation is performed to obtain the thermodynamic parameters of the engine. And distributions of key parameters are presented for a better understanding of the energy conversion process in the engine. In the experiments, a maximum electric power of about 1.57 kW and a maximum thermal-to-electric conversion efficiency of 16.8% were achieved with 5 MPa pressurized helium and 86 Hz working frequency. However, we find that the mechanical damping coefficient of the piston is dramatically increased due to the deformation of the cylinder wall caused by high thermal stress during the experiments. Thereby, the system performance was greatly reduced. Additionally, the performance differences between three engines and three alternators are significant, such as the heating temperature difference between three heater blocks of the engines, the piston displacement and the output electric power differences between

A hot air driven thermoacoustic-Stirling engine

Energy Technology Data Exchange (ETDEWEB)

Tijani, M.E.H.; Spoelstra, S. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

2012-09-15

Significant energy savings can be obtained by implementing a thermally driven heat pump into industrial or domestic applications. Such a thermally driven heat pump uses heat from a high-temperature source to drive the system which upgrades an abundantly available heat source (industrial waste heat, air, water, geothermal). A way to do this is by coupling a thermoacoustic engine with a thermoacoustic heat pump. The engine is driven by a burner and produces acoustic power and heat at the required temperature. The acoustic power is used to pump heat in the heat pump to the required temperature. This system is attractive since it uses a noble gas as working medium and has no moving mechanical parts. This paper deals with the first part of this system: the engine. In this study, hot air is used to simulate the flue gases originating from a gas burner. This is in contrast with a lot of other studies of thermoacoustic engines that use an electrical heater as heat source. Using hot air resembles to a larger extent the real world application. The engine produces about 300W of acoustic power with a performance of 41% of the Carnot efficiency at a hot air temperature of 620C.

A one-dimensional heat transfer model for parallel-plate thermoacoustic heat exchangers

NARCIS (Netherlands)

de Jong, Anne; Wijnant, Ysbrand H.; de Boer, Andries

2014-01-01

A one-dimensional (1D) laminar oscillating flow heat transfer model is derived and applied to parallel-plate thermoacoustic heat exchangers. The model can be used to estimate the heat transfer from the solid wall to the acoustic medium, which is required for the heat input/output of thermoacoustic

Thermoacoustic Emission Induced by Deeply-Penetrating Radiation and its Application to Biomedical Imaging.

Science.gov (United States)

Liew, Soo Chin

Thermoacoustic emissions induced by 2450 MHz microwave pulses in water, tissue-simulating phantoms and dog kidneys have been detected. The analytic signal magnitude has been employed in generating 'A-mode' images with excellent depth resolution. Thermoacoustic emissions have also been detected from the dose-gradient at the beam edges of a 4 MeV x-ray beam in water. These results establish the feasibility of employing thermoacoustic signals in generating diagnostic images, and in locating x-ray beam edges during radiation therapy. A theoretical model for thermoacoustic imaging using a directional transducer has been developed, which may be used in the design of future thermoacoustic imaging system, and in facilitating comparisons with other types of imaging systems. A method of characterizing biological tissues has been proposed, which relates the power spectrum of the detected thermoacoustic signals to the autocorrelation function of the thermoacoustic source distribution in the tissues. The temperature dependence of acoustic signals induced by microwave pulses in water has been investigated. The signal amplitudes vary with temperature as the thermal expansion of water, except near 4^circ C. The signal waveforms show a gradual phase change as the temperature changes from below 4^ circ to above 4^circ C. This anomaly is due to the presence of a nonthermal component detected near 4^circC, whose waveform is similar to the derivative of the room temperature signal. The results are compared to a model based on a nonequilibrium relaxation mechanism proposed by Pierce and Hsieh. The relaxation time was found to be (0.20 +/- 0.02) ns and (0.13 +/- 0.02) ns for 200 ns and 400 ns microwave pulse widths, respectively. A microwave-induced thermoacoustic source capable of launching large aperture, unipolar ultrasonic plane wave pulses in water has been constructed. This source consists of a thin water layer trapped between two dielectric media. Due to the large mismatch in the

The feasibility of using microwave-induced thermoacoustic tomography for detection and evaluation of renal calculi

International Nuclear Information System (INIS)

Cao Caijun; Nie Liming; Lou Cunguang; Xing Da

2010-01-01

Imaging of renal calculi is important for patients who suffered a urinary calculus prior to treatment. The available imaging techniques include plain x-ray, ultrasound scan, intravenous urogram, computed tomography, etc. However, the visualization of a uric acid calculus (radiolucent calculi) is difficult and often impossible by the above imaging methods. In this paper, a new detection method based on microwave-induced thermoacoustic tomography was developed to detect the renal calculi. Thermoacoustic images of calcium oxalate and uric acid calculus were compared with their x-ray images. The microwave absorption differences among the calcium oxalate calculus, uric acid calculus and normal kidney tissue could be evaluated by the amplitude of the thermoacoustic signals. The calculi hidden in the swine kidney were clearly imaged with excellent contrast and resolution in the three orthogonal thermoacoustic images. The results indicate that thermoacoustic imaging may be developed as a complementary method for detecting renal calculi, and its low cost and effective feature shows high potential for clinical applications.

Experimental Investigation of Bifurcations in a Thermoacoustic Engine

Directory of Open Access Journals (Sweden)

Vishnu R. Unni

2015-06-01

Full Text Available In this study, variation in the characteristics of the pressure oscillations in a thermoacoustic engine is explored as the input heat flux is varied. A bifurcation diagram is plotted to study the variation in the qualitative behavior of the acoustic oscillations as the input heat flux changes. At a critical input heat flux (60 Watt, the engine begins to produce acoustic oscillations in its fundamental longitudinal mode. As the input heat flux is increased, incommensurate frequencies appear in the power spectrum. The simultaneous presence of incommensurate frequencies results in quasiperiodic oscillations. On further increase of heat flux, the fundamental mode disappears and second mode oscillations are observed. These bifurcations in the characteristics of the pressure oscillations are the result of nonlinear interaction between multiple modes present in the thermoacoustic engine. Hysteresis in the bifurcation diagram suggests that the bifurcation is subcritical. Further, the qualitative analysis of different dynamic regimes is performed using nonlinear time series analysis. The physical reason for the observed nonlinear behavior is discussed. Suggestions to avert the variations in qualitative behavior of the pressure oscillations in thermoacoustic engines are also provided.

Modeling of micro-scale thermoacoustics

Energy Technology Data Exchange (ETDEWEB)

Offner, Avshalom [The Nancy and Stephen Grand Technion Energy Program, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Department of Civil and Environmental Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Ramon, Guy Z., E-mail: ramong@technion.ac.il [Department of Civil and Environmental Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel)

2016-05-02

Thermoacoustic phenomena, that is, onset of self-sustained oscillations or time-averaged fluxes in a sound wave, may be harnessed as efficient and robust heat transfer devices. Specifically, miniaturization of such devices holds great promise for cooling of electronics. At the required small dimensions, it is expected that non-negligible slip effects exist at the solid surface of the “stack”-a porous matrix, which is used for maintaining the correct temporal phasing of the heat transfer between the solid and oscillating gas. Here, we develop theoretical models for thermoacoustic engines and heat pumps that account for slip, within the standing-wave approximation. Stability curves for engines with both no-slip and slip boundary conditions were calculated; the slip boundary condition curve exhibits a lower temperature difference compared with the no slip curve for resonance frequencies that characterize micro-scale devices. Maximum achievable temperature differences across the stack of a heat pump were also calculated. For this case, slip conditions are detrimental and such a heat pump would maintain a lower temperature difference compared to larger devices, where slip effects are negligible.

Modeling of micro-scale thermoacoustics

International Nuclear Information System (INIS)

Offner, Avshalom; Ramon, Guy Z.

2016-01-01

Thermoacoustic phenomena, that is, onset of self-sustained oscillations or time-averaged fluxes in a sound wave, may be harnessed as efficient and robust heat transfer devices. Specifically, miniaturization of such devices holds great promise for cooling of electronics. At the required small dimensions, it is expected that non-negligible slip effects exist at the solid surface of the “stack”-a porous matrix, which is used for maintaining the correct temporal phasing of the heat transfer between the solid and oscillating gas. Here, we develop theoretical models for thermoacoustic engines and heat pumps that account for slip, within the standing-wave approximation. Stability curves for engines with both no-slip and slip boundary conditions were calculated; the slip boundary condition curve exhibits a lower temperature difference compared with the no slip curve for resonance frequencies that characterize micro-scale devices. Maximum achievable temperature differences across the stack of a heat pump were also calculated. For this case, slip conditions are detrimental and such a heat pump would maintain a lower temperature difference compared to larger devices, where slip effects are negligible.

Thermoacoustic refrigerators : experiments and scaling analysis

NARCIS (Netherlands)

Li, Y.

2011-01-01

Thermoacoustics, as the word spelling indicates, is an interdisciplinary field in physics. Both acoustics and thermodynamics are involved in the description of this interesting phenomenon. When a solid wall is present in direction of the wave vector of an acoustic field, the interaction between the

Mean temperature profile at the entrance of a thermoacoustic stacked screen heat exchanger

NARCIS (Netherlands)

Bühler, Simon; wilcox, D; Oosterhuis, Joris; van der Meer, Theodorus H.

2015-01-01

In thermoacoustic devises, the thermoacoustic e ect occurs in the regenerator placed between two heat exchangers. The entrance e ects of such heat exchanger are investigated with two computational uid dynamics (CFD) test cases. The rst CFD test case models an ideal heat exchanger adjacent to an open

Thermo-Acoustic Convertor for Space Power, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Sunpower will introduce thermoacoustic Stirling heat engine (TASHE) technology into its existing Stirling convertor technology to eliminate the moving mechanical...

Phase-exchange thermoacoustic engine

Science.gov (United States)

Offner, Avshalom; Meir, Avishai; Ramon, Guy Z.; WET Lab Team

2017-11-01

Phase-exchange thermoacoustic engines are reliable machines holding great promise in converting heat from low grade heat sources to mechanical or electrical power. In these engines the working fluid is a gas mixture containing one condensable component, decreasing the temperature difference required for ignition and steady state operation. Our experimental setup consists of a vertical acoustic resonator containing a mixture of air-water vapor. Water evaporates near the heat source, condenses at the heat sink and is drawn back down by gravity and capillary forces where it re-evaporates, sustaining a steady state closed thermodynamic cycle. We investigated the stability limit, namely the critical point at which temperature difference in the engine enables onset of self-excited oscillations, and the steady state of the engine. A simple theoretical model was derived, describing mechanisms of irreversible entropy generation and production of acoustic power in such engines. This model captures the essence in the differences between regular and phase-exchange thermoacoustic engines, and shows good agreement with experimental results of stability limit. Steady state results reveal not only a dramatic decrease in temperature difference, but also an increase in engine performances. The authors acknowledge the support from the Nancy and Stephen Grand Technion Energy Program (GTEP).

The half-truth of first-mover advantage.

Science.gov (United States)

Suarez, Fernando; Lanzolla, Gianvito

2005-04-01

Many executives take for granted that the first company in a new product category gets an unbeatable head start and reaps long-lasting benefits. But that doesn't always happen. The authors of this article discovered that much depends on the pace at which the category's technology is changing and the speed at which the market is evolving. By analyzing these two factors, companies can improve their odds of succeeding as first movers with the resources they possess. Gradual evolution in both the technology and the market provides a first mover with the best conditions for creating a dominant position that is long lasting (Hoover in the vacuum cleaner industry is a good example). In such calm waters, a company can defend its advantages even without exceptional skills or extensive financial resources. When the market is changing rapidly and the product isn't, a first entrant with extensive resources can obtain a long-lasting advantage (as Sony did with its Walkman personal stereo); a company with only limited resources probably must settle for a short-term benefit. When the market is static but the product is changing constantly, first-mover advantages of either kind--durable or short-lived--are unlikely. Only companies with very deep pockets can survive (think of Sony and the digital cameras it pioneered). Rapid churn in both the technology and the market creates the worst conditions. But if companies have an acute sense of when to exit-as Netscape demonstrated when it agreed to be acquired by AOL-a worthwhile short-term gain is possible. Before venturing into a newly forming market, you need to analyze the environment, assess your resources, then determine which type offirst-mover advantage is most achievable. Once you've gone into the water, you have no choice but to swim.

System and Method for Retrofit Mechanism for Motorizing A Manual Turret

National Research Council Canada - National Science Library

Schmitz, John J; Petrovich, Paul A; Stormer, A. D; Washburn, Robert G

2006-01-01

... mover unit mechanically coupled to the gear box, a user operated control device electrically coupled to the prime mover unit, and an electrical power supply electrically coupled to the prime mover unit...

Numerical analysis on a four-stage looped thermoacoustic Stirling power generator for low temperature waste heat

International Nuclear Information System (INIS)

Wang, Kai; Qiu, Limin

2017-01-01

Highlights: • Four-stage looped thermoacoustic power generator for waste heat is studied. • Coupling position is found to have remarkable effects on performance. • Better efficiency is available when coupled near the cold ends of the cores. • The influence of the regenerator position on the efficiency is weak. • Matching between the acoustic impedances of engine and alternator is important. - Abstract: Recent developments in thermoacoustic technologies have demonstrated that multi-stage looped thermoacoustic Stirling engine would be a promising option for harvesting waste heat. Previous studies on multi-stage looped thermoacoustic systems were mainly focused on heat-driven refrigeration or heat pumping, while much fewer work were done on power generations, especially those for recovering low temperature heat. In this work, a four-stage looped thermoacoustic Stirling power generator for generating electricity from low temperature waste heat at 300 °C is systematically studied. A numerical model is built and then validated on an experimental four-stage looped thermoacoustic Stirling engine. On the basis of the validated model, the effects of the coupling position for the linear alternators and the regenerator position on the acoustic characteristics and performances of the power generation system are numerically investigated. The distributions of the acoustic fields along the loop, including the pressure amplitude, volume flow rate, phase angle, specific acoustic impedance and acoustic power, are presented and analysed for three representative coupling modes. Superior efficiency is achieved when the linear alternators are coupled near the cold ends of the thermoacoustic cores on the resonators, while more electric power is generated at the hot ends. The worst performance is expected when the linear alternators are connected at the middle of the resonators. The underling mechanisms are further explained detailedly by analysing the characteristics of the

Nonorthogonality analysis of a thermoacoustic system with a premixed V-shaped flame

International Nuclear Information System (INIS)

Ji, Chenzhen; Zhao, Dan; Li, Xinyan; Li, Shihuai; Li, Junwei

2014-01-01

Highlights: • Nonorthogonality analysis of a choked thermoacoustic system is conducted. • A thermoacoustic model of a premixed V-shaped flame is developed. • Nonorthogonality is identified to arise from the boundary condition and the flame. • The contribution from the flame is shown to play a dominant role. • Eigenmodes nonorthogonality leads to transient growth of acoustic disturbances. - Abstract: Thermoacoustic instability occurs in many combustion systems, such as aero-engine afterburners, rocket motors, ramjets and gas turbines. It most often arises due to the coupling between unsteady heat release and acoustic waves. In this work, nonorthogonality analysis of a choked combustor with a gutter confined is conducted. Such configuration is used as a simplified model of the afterburner of an aero-engine. A thermoacoustic model is developed first to study the nonnormal interaction between acoustic disturbances and a premixed V-shaped flame anchored to the tip of the gutter. Eigenmode nonorthogonality analysis is then conducted. The thermoacoustic system is shown to be nonnormal and characterized by nonorthogonal eigenmodes. The nonorthogonality is identified to arise from both the complex boundary condition and the monopole-like flame. However, the contribution from the Robin-type boundary is approximately 1.5% of that from the flame. Thus the flame is identified to play a dominant role. One practical conclusions is that acoustic disturbances undergo transient growth in a combustion system with nonorthogonal eigenmodes. Such finite-time growth, which cannot be predicted by using classical linear theory might trigger high-amplitude self-sustained oscillations

Determination of the stability limit of a thermoacoustic engine by means of finite elements

NARCIS (Netherlands)

de Jong, Anne; Wijnant, Ysbrand H.; de Boer, Andries

2013-01-01

A finite element model is presented to obtain the stability limit of, as an example, 2D standing wave thermoacoustic engine. The stability limit is the required heating to obtain self-sustained (thermo)acoustic oscillations. The method used to obtain the stability limit is not restricted to the

Transmission characteristics of acoustic amplifier in thermoacoustic engine

International Nuclear Information System (INIS)

Sun Daming; Qiu Limin; Wang Bo; Xiao Yong

2008-01-01

Thermoacoustic engines are promising in practical applications for the merits of simple configuration, reliable operation and environmentally friendly working gas. An acoustic amplifier can increase the output pressure amplitude of a thermoacoustic engine (TE) and improve the matching between the engine and its load. In order to make full use of an acoustic amplifier, the transmission characteristics are studied based on linear thermoacoustic theory. Computational and experimental results show that the amplifying ability of an acoustic amplifier is mainly determined by its geometry parameters and output resistance impedance. The amplifying ability of an acoustic amplifier with appropriate length and diameter reaches its maximum when the output resistance impedance is infinite. It is also shown that the acoustic amplifier consumes an amount of acoustic power when amplifying pressure amplitude and the acoustic power consumption increases with amplifying ratio. Furthermore, a novel cascade acoustic amplifier is proposed, which has a much stronger amplifying ability with reduced acoustic power consumption. In experiments, a two-stage cascade acoustic amplifier amplifies the pressure ratio from 1.177 to 1.62 and produces a pressure amplitude of 0.547 MPa with nitrogen of 2.20 MPa as working gas. Good agreements are obtained between the theoretical analysis and experimental results. This research is instructive for comprehensively understanding the mechanism and making full use of the acoustic amplifier

Thermo-Acoustic Convertor for Space Power, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In Phase Sunpower looked at Thermoacoustic Stirling Heat Engines (TASHEs). These ranged from a TASHE which was sized for the heat from a single General Purpose Heat...

Numerical results on noise-induced dynamics in the subthreshold regime for thermoacoustic systems

Science.gov (United States)

Gupta, Vikrant; Saurabh, Aditya; Paschereit, Christian Oliver; Kabiraj, Lipika

2017-03-01

Thermoacoustic instability is a serious issue in practical combustion systems. Such systems are inherently noisy, and hence the influence of noise on the dynamics of thermoacoustic instability is an aspect of practical importance. The present work is motivated by a recent report on the experimental observation of coherence resonance, or noise-induced coherence with a resonance-like dependence on the noise intensity as the system approaches the stability margin, for a prototypical premixed laminar flame combustor (Kabiraj et al., Phys. Rev. E, 4 (2015)). We numerically investigate representative thermoacoustic models for such noise-induced dynamics. Similar to the experiments, we study variation in system dynamics in response to variations in the noise intensity and in a critical control parameter as the systems approach their stability margins. The qualitative match identified between experimental results and observations in the representative models investigated here confirms that coherence resonance is a feature of thermoacoustic systems. We also extend the experimental results, which were limited to the case of subcritical Hopf bifurcation, to the case of supercritical Hopf bifurcation. We identify that the phenomenon has qualitative differences for the systems undergoing transition via subcritical and supercritical Hopf bifurcations. Two important practical implications are associated with the findings. Firstly, the increase in noise-induced coherence as the system approaches the onset of thermoacoustic instability can be considered as a precursor to the instability. Secondly, the dependence of noise-induced dynamics on the bifurcation type can be utilised to distinguish between subcritical and supercritical bifurcation prior to the onset of the instability.

Experimental study of microwave-induced thermoacoustic imaging

Science.gov (United States)

Jacobs, Ryan T.

Microwave-Induced Thermoacoustic Imaging (TAI) is a noninvasive hybrid modality which improves contrast by using thermoelastic wave generation induced by microwave absorption. Ultrasonography is widely used in medical practice as a low-cost alternative and supplement to magnetic resonance imaging (MRI). Although ultrasonography has relatively high image resolution (depending on the ultrasonic wavelength at diagnostic frequencies), it suffers from low image contrast of soft tissues. In this work samples are irradiated with sub-microsecond electromagnetic pulses inducing acoustic waves in the sample that are then detected with an unfocused transducer. The advantage of this hybrid modality is the ability to take advantage of the microwave absorption coefficients which provide high contrast in tissue samples. This in combination with the superior spatial resolution of ultrasound waves is important to providing a low-cost alternative to MRI and early breast cancer detection methods. This work describes the implementation of a thermoacoustic experiment using a 5 kW peak power microwave source.

Generation of thermo-acoustic waves from pulsed solar/IR radiation

Science.gov (United States)

Rahman, Aowabin

Acoustic waves could potentially be used in a wide range of engineering applications; however, the high energy consumption in generating acoustic waves from electrical energy and the cost associated with the process limit the use of acoustic waves in industrial processes. Acoustic waves converted from solar radiation provide a feasible way of obtaining acoustic energy, without relying on conventional nonrenewable energy sources. One of the goals of this thesis project was to experimentally study the conversion of thermal to acoustic energy using pulsed radiation. The experiments were categorized into "indoor" and "outdoor" experiments, each with a separate experimental setup. The indoor experiments used an IR heater to power the thermo-acoustic lasers and were primarily aimed at studying the effect of various experimental parameters on the amplitude of sound waves in the low frequency range (below 130 Hz). The IR radiation was modulated externally using a chopper wheel and then impinged on a porous solid, which was housed inside a thermo-acoustic (TA) converter. A microphone located at a certain distance from the porous solid inside the TA converter detected the acoustic signals. The "outdoor" experiments, which were targeted at TA conversion at comparatively higher frequencies (in 200 Hz-3 kHz range) used solar energy to power the thermo-acoustic laser. The amplitudes (in RMS) of thermo-acoustic signals obtained in experiments using IR heater as radiation source were in the 80-100 dB range. The frequency of acoustic waves corresponded to the frequency of interceptions of the radiation beam by the chopper. The amplitudes of acoustic waves were influenced by several factors, including the chopping frequency, magnitude of radiation flux, type of porous material, length of porous material, external heating of the TA converter housing, location of microphone within the air column, and design of the TA converter. The time-dependent profile of the thermo-acoustic signals

Numerical Simulation of Pressure Fluctuations in the Thermo-acoustic Transducer

Directory of Open Access Journals (Sweden)

D. A. Uglanov

2015-01-01

Full Text Available The article describes the features of numerical simulation of acoustic oscillation excitation in the resonators with a foam insert (regenerator to study the excitation of thermo-acoustic oscillations in the circuit of small-sized engine model on the pulse tube.The aim of this work is the numerical simulation of the emerging oscillations in thermoacoustic engine resonator at the standing wave. As a basis, the work takes a thermo-acoustic resonator model with the open end (without piston developed in DeltaEC software. The precalculated operation frequency of the given resonator model, as a quarter of the wave resonator, is ν = 560 Hz.The paper offers a simplified finite element resonator model and defines the harmonic law of the temperature distribution on regenerator. The time dependences of the speed and pressure amplitude for the open end of the resonator are given; the calculated value of the process operating frequency is approximately equal to the value of the frequency for a given length of the resonator. Key findings, as a result of study, are as follows:1. The paper shows a potential for using this ESI-CFD Advanced software to simulate the processes of thermal excitation of acoustic oscillations.2. Visualization of turbulent flow fluctuations in the regenerator zone extends the analysis capability of gas-dynamic processes.3. Difference between operating frequency of the process simulated by ESI-CFD Advanced and frequency value obtained by analytical methods is about 4%, which is evidence of the model applicability to study the acoustic parameters of thermo-acoustic transducers. Experimental results have proved these data.

A family of inversion formulas in thermoacoustic tomography

KAUST Repository

Nguyen, Linh

2009-01-01

We present a family of closed form inversion formulas in thermoacoustic tomography in the case of a constant sound speed. The formulas are presented in both time-domain and frequency-domain versions. As special cases, they imply most

Investigation on thermo-acoustic instability dynamic characteristics of hydrocarbon fuel flowing in scramjet cooling channel based on wavelet entropy method

Science.gov (United States)

Zan, Hao; Li, Haowei; Jiang, Yuguang; Wu, Meng; Zhou, Weixing; Bao, Wen

2018-06-01

As part of our efforts to find ways and means to further improve the regenerative cooling technology in scramjet, the experiments of thermo-acoustic instability dynamic characteristics of hydrocarbon fuel flowing have been conducted in horizontal circular tubes at different conditions. The experimental results indicate that there is a developing process from thermo-acoustic stability to instability. In order to have a deep understanding on the developing process of thermo-acoustic instability, the method of Multi-scale Shannon Wavelet Entropy (MSWE) based on Wavelet Transform Correlation Filter (WTCF) and Multi-Scale Shannon Entropy (MSE) is adopted in this paper. The results demonstrate that the developing process of thermo-acoustic instability from noise and weak signals is well detected by MSWE method and the differences among the stability, the developing process and the instability can be identified. These properties render the method particularly powerful for warning thermo-acoustic instability of hydrocarbon fuel flowing in scramjet cooling channels. The mass flow rate and the inlet pressure will make an influence on the developing process of the thermo-acoustic instability. The investigation on thermo-acoustic instability dynamic characteristics at supercritical pressure based on wavelet entropy method offers guidance on the control of scramjet fuel supply, which can secure stable fuel flowing in regenerative cooling system.

Mover Position Detection for PMTLM Based on Linear Hall Sensors through EKF Processing.

Science.gov (United States)

Yan, Leyang; Zhang, Hui; Ye, Peiqing

2017-04-06

Accurate mover position is vital for a permanent magnet tubular linear motor (PMTLM) control system. In this paper, two linear Hall sensors are utilized to detect the mover position. However, Hall sensor signals contain third-order harmonics, creating errors in mover position detection. To filter out the third-order harmonics, a signal processing method based on the extended Kalman filter (EKF) is presented. The limitation of conventional processing method is first analyzed, and then EKF is adopted to detect the mover position. In the EKF model, the amplitude of the fundamental component and the percentage of the harmonic component are taken as state variables, and they can be estimated based solely on the measured sensor signals. Then, the harmonic component can be calculated and eliminated. The proposed method has the advantages of faster convergence, better stability and higher accuracy. Finally, experimental results validate the effectiveness and superiority of the proposed method.

Complimentary Force Allocation Control for a Dual-Mover Linear Switched Reluctance Machine

Directory of Open Access Journals (Sweden)

J. F. Pan

2017-12-01

Full Text Available This paper inspects the complementary force allocation control schemes for an integrated, dual-mover linear switched reluctance machine (LSRM. The performance of the total force is realized by the coordination of the two movers. First, the structure and characteristics of the LSRM are investigated. Then, a complimentary force allocation control scheme for the two movers is proposed. Next, three force allocation methods—constant proportion, constant proportion with a saturation interval and error compensation, and the variable proportion allocation strategies—are proposed and analyzed, respectively. Experimental results demonstrate that the complimentary force interaction between the two movers can effectively reduce the total amount of force ripples from each method. The results under the variable proportion method also show that dynamic error values falling into 0.044 mm and −0.04 mm under the unit ramp force reference can be achieved. With the sinusoidal force reference with an amplitude of 60 N and a frequency of 0.5 Hz, a dynamic force control precision of 0.062 N and 0.091 N can also be obtained.

Novel permanent magnet linear motor with isolated movers: analytical, numerical and experimental study.

Science.gov (United States)

Yan, Liang; Peng, Juanjuan; Jiao, Zongxia; Chen, Chin-Yin; Chen, I-Ming

2014-10-01

This paper proposes a novel permanent magnet linear motor possessing two movers and one stator. The two movers are isolated and can interact with the stator poles to generate independent forces and motions. Compared with conventional multiple motor driving system, it helps to increase the system compactness, and thus improve the power density and working efficiency. The magnetic field distribution is obtained by using equivalent magnetic circuit method. Following that, the formulation of force output considering armature reaction is carried out. Then inductances are analyzed with finite element method to investigate the relationships of the two movers. It is found that the mutual-inductances are nearly equal to zero, and thus the interaction between the two movers is negligible. A research prototype of the linear motor and a measurement apparatus on thrust force have been developed. Both numerical computation and experiment measurement are conducted to validate the analytical model of thrust force. Comparison shows that the analytical model matches the numerical and experimental results well.

The Influence of the Density of Coconut Fiber as Stack in Thermo-Acoustics Refrigeration System

Science.gov (United States)

Hartulistiyoso, E.; Yulianto, M.; Sucahyo, L.

2018-05-01

An experimental study of using coconut fiber as stack with varying density in thermo-acoustics refrigeration system has been done. Stack is a device which is described as the “heart” in thermo-acoustics refrigeration system. The length of stack is a fix parameter in this experiment. The performance of the coconut fiber was evaluated from the density of stack (varied from 30%, 50% and 70%), position of stack (varied from 0 to 34 cm from the sound generator), and frequency of sound generator (varied from 150 Hz, 200Hz, 250Hz and 300Hz). The inside, outside, and environment temperatures were collected every second using Data Acquisition (DAQ). The result showed that the increase of stack density will increase the performance of thermo-acoustics refrigeration system. The higher density produced temperature differences in cold side and hot side of 5.4°C. In addition, the position of stack and frequency of sound generator have an important role in the performance of thermo-acoustics refrigeration system for all variations of the density.

Thermoacoustic design using stem of goose down stack

Science.gov (United States)

Farikhah, Irna; Ristanto, Sigit; Idrus, Hadiyati; Kaltsum, Ummi; Faisal, Affandi; Setiawan, Ihsan; Setio Utomo, Agung Bambang

2012-09-01

Many refrigerators using CFC as a refrigerant are seen as the cause of the depletion of ozone. Hence, thermoacoustic was chosen as an alternative refrigerator that safe for environment. There are many variable that influenced the optimization of thermoacoustic design. One of them is thermal conductivity of material of stack. The Stack material must have a low thermal conductivity. In this research we used organic stack made of stem of goose down. It has superior thermal insulating. It means that they have the lowest thermal conductivity. The system uses no refrigerant or compressor, and the only mechanical moving part is the loudspeaker connected to a signal generator that produces the acoustic. The working fluid is air and the material of resonator is stainless steel. A series test on the laboratory found that there is a decrease of 5°C in temperature for about 2 minutes.

Design and dynamic behaviour of a cold storage system combined with a solar powered thermoacoustic refrigerator

International Nuclear Information System (INIS)

Perier-Muzet, Maxime; Bedecarrats, Jean-Pierre; Stouffs, Pascal; Castaing-Lasvignottes, Jean

2014-01-01

A heat powered thermoacoustic refrigerator consists in a thermoacoustic engine that produces acoustic work utilizing heat, coupled to a thermoacoustic cooler that converts this acoustic energy into cooling effect. These machines have already proved their capability in laboratory or in space refrigeration. Previous studies have also demonstrated the possibility of using concentrated solar energy as thermal energy sources for low power heat driven thermoacoustic refrigerators. As other solar refrigeration systems, even if the cooling demand generally increases with the intensity of the solar radiation, one of the major difficulties is to insure a frigorific power supply when there is no, or low, solar radiation. The aim of this work is to study a kW scale solar thermoacoustic refrigerator capable to reach temperatures of the industrial refrigeration domain. This refrigerator is combined with a latent cold storage in order to guarantee a sufficient cooling capacity to face to refrigeration loads in spite of the production fluctuations. A description of the studied prototype is done and the model developed to describe the transient behaviour of the main components of this machine is introduced. The results obtained with a simulation of one week with real solar radiations are presented and the behaviour and the energetic performances of the entire system are analysed. Finally the impact of the sizing of the cold storage system is discussed. With the best storage design, the system is capable to supply a cooling power of 400 W at a temperature equal or lower than −20 °C with an average Coefficient Of Performance of the solar thermoacoustic refrigerator equal to 21%

Computational Investigation on the performance of thermo-acoustically driven pulse tube refrigerator

Science.gov (United States)

Skaria, Mathew; Rasheed, K. K. Abdul; Shafi, K. A.; Kasthurirengan, S.; Behera, Upendra

2017-02-01

A Thermoacoustic Pulse Tube Refrigeration (TAPTR) system employs a thermo acoustic engine as the pressure wave generator instead of mechanical compressor. Such refrigeration systems are highly reliable due to the absence of moving components, structural simplicity and the use of environmental friendly working fluids. In the present work, a traveling wave thermoacoustic primmover (TWTAPM) has been developed and it is coupled to a pulse tube cryocooler. The performance of TAPTR depends on the operating and working fluid parameters. Simulation studies of the system has been performed using ANSYS Fluent and compared with experimental results.

Experimental evaluation of a novel robotic hospital bed mover with omni-directional mobility.

Science.gov (United States)

Guo, Zhao; Yee, Rachael Bei; Mun, Kyung-Ryoul; Yu, Haoyong

2017-11-01

Bed pushing during patient transfer is one of the most physically demanding and yet common tasks in the hospital setting. Powered bed movers have been increasingly introduced to hospitals to reduce physiological strains on the users. This study introduces and quantifies the manpower efficiency and health benefits of a novel robotic-assisted omni-directional hospital bed transporter (SESTO Bed Mover) in comparison with a conventional manual transport stretcher (Stryker Trauma Stretcher 1037) and a powered transport stretcher (HOSPIMEK HMPT 740), which has a fifth powered wheel providing power assistance only in the forward direction. A total of 14 subjects were recruited (7 porters and 7 students) and were tasked to complete a course within a controlled lab environment. It is concluded that the robotic bed mover is able to halve the required manpower to push hospital beds as compared to conventional bed pushing without any additional physiological strain, potentially improving efficiency by two-fold. Electromyography (EMG) patterns showed that users relied on the shoulder and back muscles in a fashion similar to conventional pushing, further confirming the intuitive drive of the robotic bed mover. Overall, the robotic bed mover shows reduced physical demands, less manpower required for patient transport and reduced back muscle activities, which strongly suggest health benefits for workers in the hospital. Copyright © 2017 Elsevier Ltd. All rights reserved.

Towards numerical simulation of components of thermoacoustic devices with commercial CFD software: implementation of impedance boundary conditions and application to four different studies

NARCIS (Netherlands)

Bühler, Simon

2015-01-01

Thermoacoustic engines promise to be a cost effective and reliable alternative to traditional Stirling engines, as the function of the piston is fulfilled by an acoustic wave. For the design and development of thermoacoustic devices, the one-dimensional thermoacoustic equations are commonly used.

Physical modeling and characterization of thermo-acoustic loudspeakers made of silver nano-wire films

Science.gov (United States)

La Torraca, P.; Larcher, L.; Bobinger, M.; Pavan, P.; Seeber, B.; Lugli, P.

2017-06-01

Recent developments of ultra-low heat capacity nanostructured materials revived the interest in the thermo-acoustic (TA) loudspeaker technology, which shows important advantages compared to the classical dynamic loudspeakers as they feature a lower cost and weight, flexibility, conformability to the surface of various shapes, and transparency. The development of the TA loudspeaker technology requires accurate physical models connecting the material properties to the thermal and acoustic speaker's performance. We present here a combined theoretical and experimental analysis of TA loudspeakers, where the electro-thermal and the thermo-acoustic transductions are handled separately, thus allowing an in-depth description of both the pressure and temperature dynamics. The electro-thermal transduction is analyzed by accounting for all the heat flow processes taking place between the TA loudspeaker and the surrounding environment, with focus on their frequency dependence. The thermo-acoustic conversion is studied by solving the coupled thermo-acoustic equations, derived from the Navier-Stokes equations, and by exploiting the Huygens-Fresnel principle to decompose the TA loudspeaker surface into a dense set of TA point sources. A general formulation of the 3D pressure field is derived summing up the TA point source contributions via a Rayleigh integral. The model is validated against temperature and sound pressure level measured on the TA loudspeaker sample made of a Silver Nanowire random network deposited on a polyimide substrate. A good agreement is found between measurements and simulations, demonstrating that the model is capable of connecting material properties to the thermo-acoustic performance of the device, thus providing a valuable tool for the design and optimization of TA loudspeakers.

Heat driven thermoacoustic cooler based on traveling-standing wave

International Nuclear Information System (INIS)

Kang Huifang; Zhou Gang; Li Qing

2010-01-01

This paper presents a heat driven thermoacoustic cooler system without any moving part. It consists of a thermoacoustic engine and a thermoacoustic cooler, and the former is the driving source of the latter. Both the engine and the cooler are located in one loop tube coupled with a resonator tube, and the acoustic power produced by the engine is used to drive the cooler directly. Both regenerators of the engine and the cooler are located in the near region of the pressure antinode, and operate in traveling-standing wave phase region. In the engine's regenerator, both components of the standing wave and the traveling wave realize the conversion from heat to acoustic energy. This improves the efficiency of the engine. In the cooler's regenerator, both components of the traveling wave and the standing wave pump heat from the cold end. This improves the efficiency of the cooler. At the operating point with a mean pressure of 22 bar, helium as working gas, a frequency of 234 Hz, and a heating power of 300 W, the experimental cooler provides a no-load temperature of -30 deg. C and a cooling power of 40 W at the cooling temperature of 0 deg. C. The total length of this cooler system is less than 1 m, which shows a good prospect for the domestic cooler system in room-temperature cooling such as food refrigeration and air-conditioning.

Protecting Your Turf: First-mover Advantages as a Barrier to Competitor Innovation

OpenAIRE

Briggeman, Brian C.; Gunderson, Michael A.; Detre, Joshua D.

2006-01-01

Product innovation for a juice company and its associated first-mover advantages are analyzed. Stochastic simulation is used to model market size, price, competitive intensity, and the likelihood of competitor entry. Results of moving first allow the firm to capture market share, realize first-mover advantages in excess of $2 million, and deter competitor innovation. In addition, the proposed model is flexible enough to be applied in other industries.

First Mover Advantages in Central and Eastern Europe

DEFF Research Database (Denmark)

Jakobsen, Kristian

2007-01-01

Businesses entering early into new markets are believed to attain crucial competitive advantages over later entrants. However, this contention receives only mixed support in the empirical literature, in part because performance is measured in different ways. We reexamine the performance difference...... between early movers and followers entering new geographical markets based on a sample of foreign entrants in Poland, Hungary and Lithuania. We contrast market share with two other measures of firm performance that are based on the managers' perception of their own performance relative to their own prior...... expectations and relative to industry standards. We find that market share is strongly related to order of entry, but we did not find a positive relationship between order of entry and perceived performance. We found general support for early mover advantages in Hungary and Poland but a strongly negative...

Thermoacoustic sensor for nuclear fuel temperaturemonitoring and heat transfer enhancement

Energy Technology Data Exchange (ETDEWEB)

James A. Smith; Dale K. Kotter; Randall A. Alli; Steven L. Garrett

2013-05-01

A new acoustical sensing system for the nuclear power industry has been developed at The Pennsylvania State University in collaboration with Idaho National Laboratories. This sensor uses the high temperatures of nuclear fuel to convert a nuclear fuel rod into a standing-wave thermoacoustic engine. When a standing wave is generated, the sound wave within the fuel rod will be propagated, by acoustic radiation, through the cooling fluid within the reactor or spent fuel pool and can be monitored a remote location external to the reactor. The frequency of the sound can be correlated to an effective temperature of either the fuel or the surrounding coolant. We will present results for a thermoacoustic resonator built into a Nitonic-60 (stainless steel) fuel rod that requires only one passive component and no heat exchangers.

Design, construction, and measurement of a large solar powered thermoacoustic cooler

Science.gov (United States)

Chen, Reh-Lin

2001-07-01

A device based on harnessing concentrated solar power in combination with using thermoacoustic principles has been built, instrumented, and tested. Its acoustic power is generated by solar radiation and is subsequently used to pump heat from external loads. The direct conversion between thermal and mechanical energy without going through any electronic stage makes the mechanism simple. Construction of the solar collector is also rather unsophisticated. It was converted from a 10-ft satellite dish with aluminized Mylar glued on the surface. The thermoacoustic device was mounted on the dish with its engine's hot side positioned near the focus of the parabolic dish, about 1 meter above the center of the dish. A 2-dimensional solar tracking system was built, using two servo motors to position the dish at pre-calculated coordinates. The solar powered thermoacoustic cooler is intended to be used where solar power is abundant and electricity may not be available or reliable. The cooler provides cooling during solar availability. Cooling can be maintained by the latent heat of ice when solar power is unattainable. The device has achieved cooling although compromised by gas leakage and thermal losses and was not able to provide temperatures low enough to freeze water. Improvements of the device are expected through modifications suggested herein.

A thermoacoustic-Stirling heat engine: detailed study

Science.gov (United States)

Backhaus; Swift

2000-06-01

A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood.

A family of inversion formulas in thermoacoustic tomography

KAUST Repository

Nguyen, Linh

2009-10-01

We present a family of closed form inversion formulas in thermoacoustic tomography in the case of a constant sound speed. The formulas are presented in both time-domain and frequency-domain versions. As special cases, they imply most of the previously known filtered backprojection type formulas. © 2009 AMERICAN INSTITUTE OF MATHEMATICAL SCIENCES.

Friction Factor Correlation for Regenerator Working in a Travelling-Wave Thermoacoustic System

Directory of Open Access Journals (Sweden)

Fatimah A. Z. Mohd Saat

2017-03-01

Full Text Available Regenerator is a porous solid structure which is important in the travelling-wave thermoacoustic system. It provides the necessary contact surface and thermal capacity for the working gas to undergo a thermodynamic cycle under acoustic oscillatory flow conditions. However, it also creates a pressure drop that could degrade the overall system performance. Ideally, in a travelling-wave system, the phase angle between oscillating pressure and velocity in the regenerator should be zero, or as close to zero as possible. In this study, the hydrodynamic condition of a regenerator has been investigated both experimentally (in a purpose-built rig providing a travelling-wave phasing and numerically. A two-dimensional ANSYS FLUENT CFD model, capturing the important features of the experimental conditions, has been developed. The findings suggest that a steady-state correlation, commonly used in designing thermoacoustic systems, is applicable provided that the travelling-wave phase angle is maintained. However, for coarse mesh regenerators, the results show interesting “phase shifting” phenomena, which may limit the correlation validity. Current experimental and CFD studies are important for predicting the viscous losses in future models of thermoacoustic systems.

Mathematics of Photoacoustic and Thermoacoustic Tomography

KAUST Repository

Kuchment, Peter; Kunyansky, Leonid

2011-01-01

The chapter surveys the mathematical models, problems, and algorithms of the thermoacoustic tomography (TAT) and photoacoustic tomography (PAT). TAT and PAT represent probably the most developed of the several novel “hybrid” methods of medical imaging. These new modalities combine different physical types of waves (electromagnetic and acoustic in case of TAT and PAT) in such a way that the resolution and contrast of the resulting method are much higher than those achievable using only acoustic or electromagnetic measurements.

Thermodynamic measurement and analysis of dual-temperature thermoacoustic oscillations for energy harvesting application

International Nuclear Information System (INIS)

Zhao, Dan; Ji, Chenzhen; Li, Shihuai; Li, Junwei

2014-01-01

The present work considers energy harvesting by implementing both thermo- and piezo-electric power generation modules on a bifurcating tube, which produces dual-temperature thermoacoustic oscillations. The present system distinguished from the conventional standing-wave one does not involve heat exchangers and uses two different energy conversion processes to produce electricity. To measure and analyze the sound waves generated, an infrared thermal imaging camera, hot wire anemometry, and two arrays of K-type thermocouples and microphones are employed. It is found that the total electric power is approximately 5.71 mW, of which the piezo module produces about 0.21 mW. It is about 61% more than that generated by a similar conduction-driven thermo-acoustic-piezo harvester. In order to gain insight on the heat-driven acoustic oscillations and to simulate the experiment, thermodynamic laws are used to develop a nonlinear thermoacoustic model. Comparison is then made between the numerical and experimental results. Good agreement is obtained in terms of frequency and sound pressure level. Finally, Rayleigh index is examined to characterize the conversion between thermal and sound energy. In addition, energy redistribution between different thermoacoustic modes is estimated. It is found that lower frequency thermoacoustic oscillations are easier to trigger. - Highlights: • Energy harvesting from thermo- and piezo-electric diaphragms is obtained. • Total electrical power is approximately 5.71 mW. • Thermodynamic analysis of heat-driven oscillations is performed. • Rayleigh index characterizing heat-to-sound conversion is estimated. • Energy redistribution between various eigenmodes is calculated

Output characteristics of Stirling thermoacoustic engine

International Nuclear Information System (INIS)

Sun Daming; Qiu Limin; Wang Bo; Xiao Yong; Zhao Liang

2008-01-01

A thermoacoustic engine (TE), which converts thermal energy into acoustic power by the thermoacoustic effect, shows several advantages due to the absence of moving parts, such as high reliability and long lifetime associated with reduced manufacturing costs. Power output and efficiency are important criteria of the performance of a TE. In order to increase the acoustic power output and thermal efficiency of a Stirling TE, the acoustic power distribution in the engine is studied with the variable load method. It is found that the thermal efficiency is independent of the output locations along the engine under the same acoustic power output. Furthermore, when the pressure ratio is kept constant at one location along the TE, it is beneficial to increasing the thermal efficiency by exporting more acoustic power. With nitrogen of 2.5 MPa as working gas and the pressure ratio at the compliance of 1.20 in the experiments, the acoustic power is measured at the compliance and the resonator simultaneously. The maximum power output, thermal efficiency and exergy efficiency reach 390.0 W, 11.2% and 16.0%, which are increased by 51.4%, 24.4% and 19.4%, respectively, compared to those with a single R-C load with 750 ml reservoir at the compliance. This research will be instructive for increasing the efficiency and making full use of the acoustic energy of a TE

One-dimensional acoustic modeling of thermoacoustic instabilities (on cd)

NARCIS (Netherlands)

van Kampen, J.F.; Huls, R.A.; Kok, Jacobus B.W.; van der Meer, Theodorus H.; Nilsson, A.; Boden, H.

2003-01-01

In this paper the acoustic stability of a premixed turbulent natural gas flame confined in a combustor is investigated. Specifically when the flame is operated in a lean premixed mode, the thermoacoustic system is known to exhibit instabilities. These arise from a feedback mechanism between the

Thermoacoustics a unifying perspective for some engines and refrigerators

CERN Document Server

Swift, Gregory W

2017-01-01

This updated new edition provides an introduction to the field of thermoacoustics. All of the key aspects of the topic are introduced, with the goal of helping the reader to acquire both an intuitive understanding and the ability to design hardware, build it, and assess its performance. Weaving together intuition, mathematics, and experimental results, this text equips readers with the tools to bridge the fields of thermodynamics and acoustics. At the same time, it remains firmly grounded in experimental results, basing its discussions on the distillation of a body of experiments spanning several decades and countries. The book begins with detailed treatment of the fundamental physical laws that underlie thermoacoustics. It then goes on to discuss key concepts, including simple oscillations, waves, power, and efficiency. The remaining portions of the book delve into more advanced topics and address practical concerns in applications  chapters on hardware and m easurements. With its careful progression and e...

Characterization and detection of thermoacoustic combustion oscillations based on statistical complexity and complex-network theory

Science.gov (United States)

Murayama, Shogo; Kinugawa, Hikaru; Tokuda, Isao T.; Gotoda, Hiroshi

2018-02-01

We present an experimental study on the characterization of dynamic behavior of flow velocity field during thermoacoustic combustion oscillations in a turbulent confined combustor from the viewpoints of statistical complexity and complex-network theory, involving detection of a precursor of thermoacoustic combustion oscillations. The multiscale complexity-entropy causality plane clearly shows the possible presence of two dynamics, noisy periodic oscillations and noisy chaos, in the shear layer regions (1) between the outer recirculation region in the dump plate and a recirculation flow in the wake of the centerbody and (2) between the outer recirculation region in the dump plate and a vortex breakdown bubble away from the centerbody. The vertex strength in the turbulence network and the community structure of the vorticity field can identify the vortical interactions during thermoacoustic combustion oscillations. Sequential horizontal visibility graph motifs are useful for capturing a precursor of themoacoustic combustion oscillations.

Open cycle thermoacoustics

Energy Technology Data Exchange (ETDEWEB)

Reid, Robert Stowers [Georgia Inst. of Technology, Atlanta, GA (United States)

2000-01-01

A new type of thermodynamic device combining a thermodynamic cycle with the externally applied steady flow of an open thermodynamic process is discussed and experimentally demonstrated. The gas flowing through this device can be heated or cooled in a series of semi-open cyclic steps. The combination of open and cyclic flows makes possible the elimination of some or all of the heat exchangers (with their associated irreversibility). Heat is directly exchanged with the process fluid as it flows through the device when operating as a refrigerator, producing a staging effect that tends to increase First Law thermodynamic efficiency. An open-flow thermoacoustic refrigerator was built to demonstrate this concept. Several approaches are presented that describe the physical characteristics of this device. Tests have been conducted on this refrigerator with good agreement with a proposed theory.

Numerical investigation of a looped-tube travelling-wave thermoacoustic engine with a bypass pipe

International Nuclear Information System (INIS)

Al-Kayiem, Ali; Yu, Zhibin

2016-01-01

A new configuration (“a looped-tube with a bypass pipe”) was recently proposed for low temperature travelling wave thermoacoustic engines and a prototype using atmospheric air as the working gas achieved an onset temperature difference as low as 65 °C. However, no further research has been reported about this new configuration to reveal its advantages and disadvantages. This paper aims to analyse this type of engine through a comprehensive numerical research. An engine of this type having dimensions similar to the reported prototype was firstly modelled. The calculated results were then qualitatively compared with the reported experimental data, showing a good agreement. The working principle of the engine was demonstrated and analysed. The research results show that an engine with such a bypass configuration essentially operates on the same thermodynamic principle as other travelling wave thermoacoustic engines, differing only in the design of the acoustic resonator. Both extremely short regenerators and a near-travelling wave resonator minimise the engine's acoustic losses, and thus significantly reduce its onset temperature difference. However, such short regenerators likely cause severe heat conduction losses, especially if the engine is applied to heat sources with higher temperatures. Furthermore, the acoustic power flowing back to the engine core is relatively low, while a large stream of acoustic power has to propagate within its resonator to maintain an acoustic resonance, potentially leading to low power density. The model was then applied to design an engine with a much longer regenerator and higher mean pressure to increase its power density. A thermoacoustic cooler was also added to the engine to utilise its acoustic power, allowing the evaluation of thermal efficiency. The pros and cons of the engine configuration are then discussed. - Highlights: • Analysed the working principle of a bypass type thermoacoustic engine. • Analysed the pros and

A thermoacoustic-Stirling heat engine: Detailed study

International Nuclear Information System (INIS)

Backhaus, S.; Swift, G. W.

2000-01-01

A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood. (c) 2000 Acoustical Society of America

Downtown People Mover (DPM) Winterization Test Demonstration : Otis Elevator

Science.gov (United States)

1982-01-01

The Otis Elevator Company Transportation Technology Division (OTIS-TTD) Downtown People Mover (DPM) Winterization Test Demonstration Final Report covers the 1978-79 and 1979-80 winter periods. Tests were performed at the Otis test track in Denver, Co...

Efficient Similarity Search Using the Earth Mover's Distance for Large Multimedia Databases

DEFF Research Database (Denmark)

Assent, Ira; Wichterich, Marc; Meisen, Tobias

2008-01-01

Multimedia similarity search in large databases requires efficient query processing. The Earth mover's distance, introduced in computer vision, is successfully used as a similarity model in a number of small-scale applications. Its computational complexity hindered its adoption in large multimedia...... databases. We enable directly indexing the Earth mover's distance in structures such as the R-tree and the VA-file by providing the accurate 'MinDist' function to any bounding rectangle in the index. We exploit the computational structure of the new MinDist to derive a new lower bound for the EMD Min...

Fission-powered in-core thermoacoustic sensor

Energy Technology Data Exchange (ETDEWEB)

Garrett, Steven L. [Graduate Program in Acoustics, Penn State University, University Park, Pennsylvania 16802 (United States); Smith, James A. [Fundamental Fuel Properties, Idaho National Laboratory, Idaho Falls, Idaho 83415 (United States); Smith, Robert W. M. [Applied Research Laboratory, Penn State University, State College, Pennsylvania 16804 (United States); Heidrich, Brenden J. [Nuclear Science User Facilities, Idaho National Laboratory, Idaho Falls, Idaho 83415 (United States); Heibel, Michael D. [Global Technology Development, Westinghouse Electric Company, Cranberry Township, Pennsylvania 16066 (United States)

2016-04-04

A thermoacoustic engine is operated within the core of a nuclear reactor to acoustically telemeter coolant temperature (frequency-encoded) and reactor power level (amplitude-encoded) outside the reactor, thus providing the values of these important parameters without external electrical power or wiring. We present data from two hydrophones in the coolant (far from the core) and an accelerometer attached to a structure outside the reactor. These signals have been detected even in the presence of substantial background noise generated by the reactor's fluid pumps.

Thermo-acoustic coupling in can-annular combustors : A numerical investigation

NARCIS (Netherlands)

Farisco, Federica; Panek, Lukasz; Kok, Jim B.W.; Pent, Jared; Rajaram, Rajesh

2015-01-01

Thermo-acoustic instabilities in modern, high power density gas turbines need to be predicted and understood in order to avoid unexpected damage and engine failure. While the annular combustor design is expected to suffer from the occurrence of transverse waves and burner-to-burner acoustic

Hybrid powertrain system

Science.gov (United States)

Grillo, Ricardo C.; O'Neil, Walter K.; Preston, David M.

2005-09-20

A hybrid powertrain system is provided that includes a first prime mover having a rotational output, a second prime mover having a rotational output, and a transmission having a main shaft supporting at least two main shaft gears thereon. The transmission includes a first independent countershaft drivingly connected to the first prime mover and including at least one ratio gear supported thereon that meshes with a respective main shaft gear. A second independent countershaft is drivingly connected to the second prime mover and includes at least one ratio gear supported thereon that meshes with a respective main shaft gear. The ratio gears on the first and second countershafts cooperate with the main shaft gears to provide at least one gear ratio between the first and second countershafts and the main shaft. A shift control mechanism selectively engages and disengages the first and second countershafts for rotation with the main shaft.

On design and development of additional End-Effectors for the Cassette Multifunctional Mover

Energy Technology Data Exchange (ETDEWEB)

Valkama, Peetu, E-mail: peetu.valkama@tut.fi [Department of Intelligent Hydraulics and Automation, Tampere University of Technology, P.O. Box 589, FI-33720 Tampere (Finland); Mattila, J.; Amjad, F.; Vaeyrynen, J.; Vilenius, M. [Department of Intelligent Hydraulics and Automation, Tampere University of Technology, P.O. Box 589, FI-33720 Tampere (Finland); Siuko, M. [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Semeraro, L.; Esque, S. [F4E, Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain)

2011-10-15

The divertor area of ITER Vacuum Vessel (VV) consists of 54 modular cassettes which must be replaced three times during the estimated 20 years of operation of the ITER. Cassette Multifunctional Mover (CMM) and Cassette Toroidal Mover (CTM) are used in the cassette remote handling (RH). In this paper we discuss the design and development process for the RH equipment to be used in the ITER environment. Design concepts for the Standard Cassette End-Effector and Central Cassette End-Effector are described and the conceptual design phase methodology is presented. The main improvements of the new End-Effector concept designs are more robust and reliable assembly process with reduced CMM mover assembly accuracy requirement. New Central Cassette locking system was developed to address the high forces and contact pressures emerging during the Central Cassette installation. The chosen design concepts are verified with virtual reality simulations and are fulfilling the requirements defined in the concept design phase, including structural, assembly sequence, safety and reliability.

Orthogonal experimental study on high frequency cascade thermoacoustic engine

International Nuclear Information System (INIS)

Hu Zhongjun; Li Qing; Li Zhengyu; Li Qiang

2008-01-01

Orthogonal experiment design and variance analysis were adopted to investigate a miniature cascade thermoacoustic engine, which consisted of one standing wave stage and one traveling wave stage in series, operating at about 470 Hz, using helium as the working gas. Optimum matching of the heater powers between stages was very important for the performance of a cascade thermoacoustic engine, which was obtained from the orthogonal experiments. The orthogonal experiment design considered three experimental factors, i.e. the charging pressure and the heater powers in the two stages, which varied on five different levels, respectively. According to the range analysis and variance analysis from the orthogonal experiments, the charging pressure was the most sensitive factor influencing the dynamic pressure amplitude and onset temperature. The total efficiency and the dynamic pressure amplitude increased when the traveling wave stage heater power increased. The optimum ratio of the heater powers between the traveling wave stage and the standing wave stage was about 1.25, compromising the total efficiency with the dynamic pressure amplitude

CargoMover - the driverless 'truck on rails'; CargoMover - der fahrerlose 'Lkw auf Schienen'

Energy Technology Data Exchange (ETDEWEB)

Mairhofer, F. [Siemens AG, Erlangen (Germany). Transportation Systems, Cargo Logistics; Janssen, G. [DB Netz AG, NL West, Duisburg (Germany)

2003-07-01

Year after year, more and more freight is transported in Europe. Most of it is transported by road, because users currently see the truck as the fastest, most flexible and most economic solution. But road haulage is already leading to a lot of congestion, so that is it becoming more and more important to shift traffic onto the railways. The high-availability CargoMover {sup registered} system complements existing rail freight transport services. It combines the strategic advantages of truck and rail transport and offers flexible driverless rail freight transport to individual destinations - including at regional and local level, and for short-term requirements or small loads. (orig.) [German] Jahr fuer Jahr werden in Europa mehr Gueter bewegt. Der Grossteil dieser Transporte erfolgt auf der Strasse, weil der LKW von vielen Nutzern momentan als die schnellste, flexibelste und wirtschaftlichste Loesung angesehen wird. Schon heute fuehrt der Lkw-Verkehr aber zu vielen Staus, so dass es immer wichtiger wird, mehr Transportvolumen auf die Schiene zu bringen. Der CargoMover {sup registered} komplettiert als hochverfuegbares System das Gueterverkehrsangebot auf der Schiene. Er verbindet die strategischen Vorteile des Lkw mit denen des Bahnsystems und ermoeglicht fahrerlosen, zielreinen und flexiblen Gueterverkehr auf der Schiene - auch im Regional- und Nahverkehr, bei kurzfristigem Bedarf oder kleineren Losgroessen. (orig.)

Structural capital management creates sustainable competitiveness and prolonged first-mover advantage

Directory of Open Access Journals (Sweden)

C. R. Van Zyl

2005-12-01

Full Text Available Structural (SC capital is part of the intellectual capital that is owned by an organisation and its efficient and dedicated management is essential for the creation of shareholder value, sustainable competitive advantage, and prolonged first-mover advantage. SC consists of three types of capital, namely: innovation, organisational and process capital. Organisational capital consists of organisational culture, management philosophies etc. and has received a large amount of management attention. However, organisational capital is not as valuable towards the creation of sustainable competitiveness and first-mover advantage as innovation and process capital are. It is the purpose of this article to demonstrate how a thorough understanding and the efficient management of innovation and process capital enables organisations to achieve the afore-mentioned benefits. Innovation capital management consists primarily of patent and brand management, which are particularly important as patent management forms a high-margin justification for the implementation of organisation-wide intellectual property management, and the management of high-equity brands secures a loyal customer base and associative sustainable competitiveness and first-mover advantage benefits. Although not as obviously valuable as innovation capital, the article also explores the value that the efficient management of unique organisational processes and methodologies contribute towards the achievement of prolonged first-mover advantage and the provision of protection against competitor actions. This exploration involved an examination of contemporary literature, theories and business cases and subsequently revealed that SCM is a vital discipline/philosophy that must be implemented by any organisation wishing to achieve greater sustainable competitiveness. Innovation and process capital are of particular importance as these assets can be made tangible, leveraged and integrated into existing

Does First Last: The Existence and Extent of First Mover Advantages on Spatial Networks

OpenAIRE

David Levinson; Feng Xie

2007-01-01

This paper examines the nature of first mover advantages on spatially-differentiated surface transportation networks. The literature on first mover advantages identifies a number of sources that explain their existence. However whether those sources exist on spatial networks, and how they play out with true capital immobility have been unanswered questions. By examining empirical examples including commuter rail and the Underground in London and roads in the Twin Cities of Minneapolis and St....

TH-AB-209-09: Quantitative Imaging of Electrical Conductivity by VHF-Induced Thermoacoustics

Energy Technology Data Exchange (ETDEWEB)

Patch, S; Hull, D [Avero Diagnostics, Irving, TX (United States); See, W [Medical College of Wisconsin, Milwaukee, WI (United States); Hanson, G [UW-Milwaukee, Milwaukee, WI (United States)

2016-06-15

Purpose: To demonstrate that very high frequency (VHF) induced thermoacoustics has the potential to provide quantitative images of electrical conductivity in Siemens/meter, much as shear wave elastography provides tissue stiffness in kPa. Quantitatively imaging a large organ requires exciting thermoacoustic pulses throughout the volume and broadband detection of those pulses because tomographic image reconstruction preserves frequency content. Applying the half-wavelength limit to a 200-micron inclusion inside a 7.5 cm diameter organ requires measurement sensitivity to frequencies ranging from 4 MHz down to 10 kHz, respectively. VHF irradiation provides superior depth penetration over near infrared used in photoacoustics. Additionally, VHF signal production is proportional to electrical conductivity, and prostate cancer is known to suppress electrical conductivity of prostatic fluid. Methods: A dual-transducer system utilizing a P4-1 array connected to a Verasonics V1 system augmented by a lower frequency focused single element transducer was developed. Simultaneous acquisition of VHF-induced thermoacoustic pulses by both transducers enabled comparison of transducer performance. Data from the clinical array generated a stack of 96-images with separation of 0.3 mm, whereas the single element transducer imaged only in a single plane. In-plane resolution and quantitative accuracy were measured at isocenter. Results: The array provided volumetric imaging capability with superior resolution whereas the single element transducer provided superior quantitative accuracy. Combining axial images from both transducers preserved resolution of the P4-1 array and improved image contrast. Neither transducer was sensitive to frequencies below 50 kHz, resulting in a DC offset and low-frequency shading over fields of view exceeding 15 mm. Fresh human prostates were imaged ex vivo and volumetric reconstructions reveal structures rarely seen in diagnostic images. Conclusion

Experimental study on a co-axial pulse tube cryocooler driven by a small thermoacoustic stirling engine

Science.gov (United States)

Chen, M.; Ju, L. Y.; Hao, H. X.

2014-01-01

Small scale thermoacoustic heat engines have advantages in fields like space exploration and domestic applications considering small space occupation and ease of transport. In the present paper, the influence of resonator diameter on the general performance of a small thermoacoustic Stirling engine was experimentally investigated using helium as the working gas. Reducing the diameter of the resonator appropriately is beneficial for lower onset heating temperature, lower frequency and higher pressure amplitude. Based on the pressure distribution in the small thermoacoustic engine, an outlet for the acoustic work transmission was made to combine the engine and a miniature co-axial pulse tube cooler. The cooling performance of the whole refrigeration system without any moving part was tested. Experimental results showed that further efforts are required to optimize the engine performance and its match with the co-axial pulse tube cooler in order to obtain better cooling performance, compared with its original operating condition, driven by a traditional electrical linear compressor.

Radiation-induced thermoacoustic imaging

International Nuclear Information System (INIS)

Bowen, T.

1984-01-01

This invention provides a new technique for obtaining information non-invasively on the composition and structures of a material or body by detecting radiation-induced thermoacoustic image features. This is accomplished by utilizing the acoustic wave generated by sudden thermal stress. The sudden thermal stress is induced by a pulse of radiation which deposits energy causing a rapid, but very small, rise of temperature (typically, ΔT approximately 10sup(-6) - 10sup(-5) deg C). The radiation may be ionizing radiation, such as high energy electrons, photons (x-rays), neutrons, or other charged particles or it may be non-ionizing radiation, such as R.F. and microwave electromagnetic radiation and ultrasonic radiation. The choice of radiation depends on the nature of the body to be imaged and the type of information desired

Thermoacoustic and thermoreflectance imaging of biased integrated circuits: Voltage and temperature maps

Energy Technology Data Exchange (ETDEWEB)

Hernández-Rosales, E.; Cedeño, E. [Gleb Wataghin Physics Institute, University of Campinas - Unicamp, 13083-859 Campinas, SP (Brazil); Instituto Politécnico Nacional, Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, Legaria 694, Colonia Irrigación, CP 11500, México, DF (Mexico); Hernandez-Wong, J. [Instituto Politécnico Nacional, Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, Legaria 694, Colonia Irrigación, CP 11500, México, DF (Mexico); CONACYT, México, DF, México (Mexico); Rojas-Trigos, J. B.; Marin, E. [Instituto Politécnico Nacional, Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, Legaria 694, Colonia Irrigación, CP 11500, México, DF (Mexico); Gandra, F. C. G.; Mansanares, A. M., E-mail: manoel@ifi.unicamp.br [Gleb Wataghin Physics Institute, University of Campinas - Unicamp, 13083-859 Campinas, SP (Brazil)

2016-07-25

In this work a combined thermoacoustic and thermoreflectance set-up was designed for imaging biased microelectronic circuits. In particular, it was used with polycrystalline silicon resistive tracks grown on a monocrystalline Si substrate mounted on a test chip. Thermoreflectance images, obtained by scanning a probe laser beam on the sample surface, clearly show the regions periodically heated by Joule effect, which are associated to the electric current distribution in the circuit. The thermoacoustic signal, detected by a pyroelectric/piezoelectric sensor beneath the chip, also discloses the Joule contribution of the whole sample. However, additional information emerges when a non-modulated laser beam is focused on the sample surface in a raster scan mode allowing imaging of the sample. The distribution of this supplementary signal is related to the voltage distribution along the circuit.

Oscillatory flows in jet pumps: towards design guidelines for thermoacoustic applications

NARCIS (Netherlands)

Oosterhuis, Joris

2016-01-01

Thermoacoustic engines are an interesting alternative to conventional heat engines (such as Stirling engines) due to the absence of moving parts in the hot region and the small temperature difference required to operate. These engines can provide a durable solution in, for example, waste heat

Thermo-acoustic cross-talk between cans in a can-annular combustor

NARCIS (Netherlands)

Farisco, Federica; Panek, Lukasz; Kok, Jim B.W.

2017-01-01

Thermo-acoustic instabilities in gas turbine engines are studied to avoid engine failure. Compared to the engines with annular combustors, the can-annular combustor design should be less vulnerable to acoustic burner-to-burner interaction, since the burners are acoustically coupled only by the

Effect of temperature on thermoacoustic properties of olive oil in alcohol mixtures

International Nuclear Information System (INIS)

Shriwas, R S; Chimankar, O P; Tabhane, P V; Dange, S P; Tembhurkar, Y D

2012-01-01

The ultrasonic studies in liquids are great use in understanding the nature and strength of molecular interactions. Recently ultrasonic is the rapidly growing field research, which has been used in the food industry for both analysis and modification of food products. This paper presents ultrasonic velocity, density, adiabatic compressibility in olive oil with alcohol at different concentration that has been measured in the temperature range from 283.15K to 298.15K. The Moelwyn-Hughes parameter has been utilised to establish some simple relations between the available volumes, Bayer's non- linearity parameter, internal pressure, van der Waal's constant, Debye temperature etc. a relationship among the isobaric, isothermal and isochoric thermo-acoustical parameter have been studied and analyzed in the case olive oil with alcohol mixture. The present treatments had the distinct advantages of the thermo-acoustic parameters in the particular mixture.

Thermoacoustic focusing lens by symmetric Airy beams with phase manipulations

Science.gov (United States)

Liu, Chen; Xia, Jian-Ping; Sun, Hong-Xiang; Yuan, Shou-Qi

2017-12-01

We report the realization of broadband acoustic focusing lenses based on two symmetric thermoacoustic phased arrays of Airy beams, in which the units of thermoacoustic phase control are designed by employing air with different temperatures surrounded by rigid insulated boundaries and thermal insulation films. The phase delays of the transmitted and reflected units could cover a whole 2π interval, which arises from the change of the sound velocity of air induced by the variation of the temperature. Based on the units of phase control, we design the transmitted and reflected acoustic focusing lenses with two symmetric Airy beams, and verify the high self-healing focusing characteristic and the feasibility of the thermal insulation films. Besides, the influences of the bending angle of the Airy beam on the focusing performance are discussed in detail. The proposed acoustic lens has advantages of broad bandwidth (about 4.8 kHz), high focusing performance, self-healing feature, and simple structure, which enable it to provide more schemes for acoustic focusing. It has excellent potential applications in acoustic devices.

Thermoacoustic model of a modified free piston Stirling engine with a thermal buffer tube

International Nuclear Information System (INIS)

Yang, Qin; Luo, Ercang; Dai, Wei; Yu, Guoyao

2012-01-01

This article presents a modified free-piston Stirling heat engine configuration in which a thermal buffer tube is added to sandwich between the hot and cold heat exchangers. Such a modified configuration may lead to an easier fabrication and lighter weight of a free piston. To analyze the thermodynamic performance of the modified free piston Stirling heat engine, thermoacoustic theory is used. In the thermoacoustic modelling, the regenerator, the free piston, and the thermal buffer tube are given at first. Then, based on linear thermoacoustic network theory, the thermal and thermodynamic networks are presented to characterize acoustic pressure and volume flow rate distributions at different interfaces, and the global performance such as the power output, the heat input and the thermal efficiency. A free piston Stirling heat engine with several hundreds of watts mechanical power output is selected as an example. The typical operating and structure parameters are as follows: frequency around 50 Hz, mean pressure around 3.0 MPa, and a diameter of free piston around 50 mm. From the analysis, it was found that the modified free-piston Stirling heat engine has almost the same thermodynamic performance as the original design, which indicates that the modified configuration is worthy to develop in future because of its mechanical simplicity and reliability.

Experimental Investigation of Bifurcations in a Thermoacoustic Engine

OpenAIRE

Vishnu R. Unni; Yogesh M. S. Prasaad; N. T. Ravi; S. Md Iqbal; Bala Pesala; R. I. Sujith

2015-01-01

In this study, variation in the characteristics of the pressure oscillations in a thermoacoustic engine is explored as the input heat flux is varied. A bifurcation diagram is plotted to study the variation in the qualitative behavior of the acoustic oscillations as the input heat flux changes. At a critical input heat flux (60 Watt), the engine begins to produce acoustic oscillations in its fundamental longitudinal mode. As the input heat flux is increased, incommensurate frequencies appear i...

Watching Eyes and Living up to Expectations: Unkind, Not Kind, Eyes Increase First Mover Cooperation in a Sequential Prisoner’s Dilemma

Directory of Open Access Journals (Sweden)

Loren Pauwels

2017-04-01

Full Text Available (1 Background: Why and when images of watching eyes encourage prosocial behavior is still subject to discussion, and two recent meta-analyses show no effect of watching eyes on generosity. This study aims to discern the effect of watching eyes of different valence on two separate aspects of prosocial behavior, and additionally investigates whether individuals’ social value orientation moderates the effect of eyes. (2 Methods: Individuals take on the role of either a first or second mover in an incentivized, anonymous sequential prisoner’s dilemma (n = 247, a two-person game which separates the need to form expectations about the other player (first mover cooperation, trust from the motive of greed (second mover cooperation, reciprocity. During decision-making, a picture of either kind eyes, unkind eyes, or a control picture is presented above each decision matrix. (3 Results: The results indicate that unkind eyes, and not kind eyes, significantly boost first mover cooperation. In contrast, neither type of eye cues increase second mover cooperation. Social value orientation does not moderate these effects. (4 Conclusions: Thus, the data suggest that the valence of eye cues matters, and we propose that unkind eyes urge first movers to live up to the interaction partner’s expectations.

Measurement of Heat Flow Transmitted through a Stacked-Screen Regenerator of Thermoacoustic Engine

Directory of Open Access Journals (Sweden)

Shu Han Hsu

2017-03-01

Full Text Available A stacked-screen regenerator is a key component in a thermoacoustic Stirling engine. Therefore, the choice of suitable mesh screens is important in the engine design. To verify the applicability of four empirical equations used in the field of thermoacoustic engines and Stirling engines, this report describes the measurements of heat flow rates transmitted through the stacked screen regenerator inserted in an experimental setup filled with pressurized Argon gas having mean pressure of 0.45 MPa. Results show that the empirical equations reproduce the measured heat flow rates to a mutually similar degree, although their derivation processes differ. Additionally, results suggest that two effective pore radii would be necessary to account for the viscous and thermal behaviors of the gas oscillating in the stacked-screen regenerators.

Basic treatment of onset conditions and transient effects in thermoacoustic Stirling engines

NARCIS (Netherlands)

Waele, de A.T.A.M.

2009-01-01

This paper treats the basics of thermoacoustic engines. The set of differential equations, which describes the dynamics of the individual components, is condensed in a single high-order differential equation which determines the time dependence of all dynamic variables. From this relation analytical

Innovations in food products: first-mover advantages and entopry metrics

NARCIS (Netherlands)

Sporleder, T.L.; Hooker, N.H.; Shannahan, C.J.; Bröring, S.

2008-01-01

The objective of this research is to investigate food product innovation in the context of the firstmover strategy among food manufacturers within a supply chain. The emphasis of the analysis is on developing a useful metric for tracking new product development in the context of first-mover

Turbulent Flow Modification With Thermoacoustic Waves for Separation Control

Science.gov (United States)

2017-08-24

respectively. At the outlet, the time-average flow is set to be the target state of the sponge zone. In this section, the effects of momentum thickness...Turbulent Flow Modification With Thermoacoustic Waves For Separation Control The views, opinions and/or findings contained in this report are those...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. Florida State University Sponsored Research Administration 874

Measurement of target and double-spin asymmetries for the mover accent='true'>e→mover> accent='true'>p→mover>→eπ+(n) reaction in the nucleon resonance region at low $Q^2$

Energy Technology Data Exchange (ETDEWEB)

Zheng, X.; Adhikari, K. P.; Bosted, P.; Deur, A.; Drozdov, V.; El Fassi, L.; Kang, Hyekoo; Kovacs, K.; Kuhn, S.; Long, E.; Phillips, S. K.; Ripani, M.; Slifer, K.; Smith, L. C.; Adikaram, D.; Akbar, Z.; Amaryan, M. J.; Anefalos Pereira, S.; Asryan, G.; Avakian, H.; Badui, R. A.; Ball, J.; Baltzell, N. A.; Battaglieri, M.; Batourine, V.; Bedlinskiy, I.; Biselli, A. S.; Briscoe, W. J.; Bültmann, S.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Charles, G.; Chen, J. -P.; Chetry, T.; Choi, Seonho; Ciullo, G.; Clark, L.; Colaneri, L.; Cole, P. L.; Compton, N.; Contalbrigo, M.; Crede, V.; D' Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Djalali, C.; Dodge, G. E.; Dupre, R.; Egiyan, H.; El Alaoui, A.; Elouadrhiri, L.; Eugenio, P.; Fanchini, E.; Fedotov, G.; Fersch, R.; Filippi, A.; Fleming, J. A.; Gevorgyan, N.; Ghandilyan, Y.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Gleason, C.; Golovach, E.; Gothe, R. W.; Griffioen, K. A.; Guidal, M.; Guler, N.; Guo, L.; Hanretty, C.; Harrison, N.; Hattawy, M.; Hicks, K.; Holtrop, M.; Hughes, S. M.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jenkins, D.; Jiang, H.; Jo, H. S.; Joosten, S.; Keller, D.; Khachatryan, G.; Khandaker, M.; Kim, A.; Kim, W.; Klein, F. J.; Kubarovsky, V.; Lanza, L.; Lenisa, P.; Livingston, K.; MacGregor, I. J. D.; Markov, N.; McKinnon, B.; Mirazita, M.; Mokeev, V.; Movsisyan, A.; Munevar, E.; Munoz Camacho, C.; Murdoch, G.; Nadel-Turonski, P.; Net, L. A.; Ni, A.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Paolone, M.; Paremuzyan, R.; Park, K.; Pasyuk, E.; Peng, P.; Pisano, S.; Pogorelko, O.; Price, J. W.; Puckett, A. J. R.; Raue, B. A.; Rizzo, A.; Rosner, G.; Rossi, P.; Roy, P.; Sabatié, F.; Salgado, C.; Schumacher, R. A.; Sharabian, Y. G.; Skorodumina, Iu.; Smith, G. D.; Sokhan, D.; Sparveris, N.; Stankovic, I.; Strakovsky, I. I.; Strauch, S.; Taiuti, M.; Tian, Ye; Ungaro, M.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Wei, X.; Weinstein, L. B.; Wood, M. H.; Zachariou, N.; Zhang, J.; Zonta, I.

2016-10-01

We report measurements of target- and double-spin asymmetries for the exclusive channel mover accent='true'>e→mover> accent='true'>p→mover>→eπ+(n) in the nucleon resonance region at Jefferson Lab using the CEBAF Large Acceptance Spectrometer (CLAS). These asymmetries were extracted from data obtained using a longitudinally polarized NH3 target and a longitudinally polarized electron beam with energies 1.1, 1.3, 2.0, 2.3, and 3.0 GeV. The new results are consistent with previous CLAS publications but are extended to a low Q² range from 0.0065 to 0.35 (GeV/c)². The Q² access was made possible by a custom-built Cherenkov detector that allowed the detection of electrons for scattering angles as low as 6 degrees. These results are compared with the unitary isobar models JANR and MAID, the partial-wave analysis prediction from SAID, and the dynamic model DMT. In many kinematic regions our results, in particular results on the target asymmetry, help to constrain the polarization-dependent components of these models.

Sustainable New Brick and Thermo-Acoustic Insulation Panel from Mineralization of Stranded Driftwood Residues

Directory of Open Access Journals (Sweden)

Anna Laura Pisello

2016-08-01

Full Text Available There is considerable interest recently in by-products for application in green buildings. These materials are widely used as building envelope insulators or blocks. In this study, an experimental study was conducted to test stranded driftwood residues as raw material for possible thermo-acoustic insulation panel and environmentally sustainable brick. The thermal and acoustic characteristics of such a natural by-product were examined. Part of samples were mineralized by means of cement-based additive to reinforce the material and enhance its durability as well as fire resistance. Several mixtures with different sizes of ground wood chips and different quantities of cement were investigated. The thermo-acoustic in-lab characterization was aimed at investigating the thermal conductivity, thermal diffusivity, volumetric specific heat, and acoustic transmission loss. All samples were tested before and after mineralization. Results from this study indicate that it is possible to use stranded driftwood residues as building materials with competitive thermo-acoustic properties. In fact, the thermal conductivity was shown to be always around 0.07 W/mK in the unbound samples, and around double that value for the mineralized samples, which present a much higher volumetric specific heat (1.6 MJ/m3K and transmission loss capability. The lignin powder showed a sort of intermediate behavior between the unbound and the mineralized samples.

Thermodynamic analysis of onset characteristics in a miniature thermoacoustic Stirling engine

Science.gov (United States)

Huang, Xin; Zhou, Gang; Li, Qing

2013-06-01

This paper analyzes the onset characteristics of a miniature thermoacoustic Stirling heat engine using the thermodynamic analysis method. The governing equations of components are reduced from the basic thermodynamic relations and the linear thermoacoustic theory. By solving the governing equation group numerically, the oscillation frequencies and onset temperatures are obtained. The dependences of the kinds of working gas, the length of resonator tube, the diameter of resonator tube, on the oscillation frequency are calculated. Meanwhile, the influences of hydraulic radius and mean pressure on the onset temperature for different working gas are also presented. The calculation results indicate that there exists an optimal dimensionless hydraulic radius to obtain the lowest onset temperature, whose value lies in the range of 0.30-0.35 for different working gases. Furthermore, the amplitude and phase relationship of pressures and volume flows are analyzed in the time-domain. Some experiments have been performed to validate the calculations. The calculation results agree well with the experimental values. Finally, an error analysis is made, giving the reasons that cause the errors of theoretical calculations.

Exogenous contrast agents for thermoacoustic imaging: An investigation into the underlying sources of contrast

International Nuclear Information System (INIS)

Ogunlade, Olumide; Beard, Paul

2015-01-01

Purpose: Thermoacoustic imaging at microwave excitation frequencies is limited by the low differential contrast exhibited by high water content tissues. To overcome this, exogenous thermoacoustic contrast agents based on gadolinium compounds, iron oxide, and single wall carbon nanotubes have previously been suggested and investigated. However, these previous studies did not fully characterize the electric, magnetic, and thermodynamic properties of these agents thus precluding identification of the underlying sources of contrast. To address this, measurements of the complex permittivity, complex permeability, DC conductivity, and Grüneisen parameter have been made. These measurements allowed the origins of the contrast provided by each substance to be identified. Methods: The electric and magnetic properties of the contrast agents were characterized at 3 GHz using two rectangular waveguide cavities. The DC conductivity was measured separately using a conductivity meter. Thermoacoustic signals were then acquired and compared to those generated in water. Finally, 3D electromagnetic simulations were used to decouple the different contributions to the absorbed power density. Results: It was found that the gadolinium compounds provided appreciable electric contrast but not originating from the gadolinium itself. The contrast was either due to dissociation of the gadolinium salt which increased ionic conductivity or its nondissociated polar fraction which increased dielectric polarization loss or a combination of both. In addition, very high concentrations were required to achieve appreciable contrast, to the extent that the Grüneisen parameter increased significantly and became a source of contrast. Iron oxide particles were found to produce low but measurable dielectric contrast due to dielectric polarization loss, but this is attributed to the coating of the particles not the iron oxide. Single wall carbon nanotubes did not provide measurable contrast of any type

Exogenous contrast agents for thermoacoustic imaging: An investigation into the underlying sources of contrast

Energy Technology Data Exchange (ETDEWEB)

Ogunlade, Olumide, E-mail: o.ogunlade@ucl.ac.uk; Beard, Paul [Department of Medical Physics and Biomedical Engineering, University College London, London WC1E 6BT (United Kingdom)

2015-01-15

Purpose: Thermoacoustic imaging at microwave excitation frequencies is limited by the low differential contrast exhibited by high water content tissues. To overcome this, exogenous thermoacoustic contrast agents based on gadolinium compounds, iron oxide, and single wall carbon nanotubes have previously been suggested and investigated. However, these previous studies did not fully characterize the electric, magnetic, and thermodynamic properties of these agents thus precluding identification of the underlying sources of contrast. To address this, measurements of the complex permittivity, complex permeability, DC conductivity, and Grüneisen parameter have been made. These measurements allowed the origins of the contrast provided by each substance to be identified. Methods: The electric and magnetic properties of the contrast agents were characterized at 3 GHz using two rectangular waveguide cavities. The DC conductivity was measured separately using a conductivity meter. Thermoacoustic signals were then acquired and compared to those generated in water. Finally, 3D electromagnetic simulations were used to decouple the different contributions to the absorbed power density. Results: It was found that the gadolinium compounds provided appreciable electric contrast but not originating from the gadolinium itself. The contrast was either due to dissociation of the gadolinium salt which increased ionic conductivity or its nondissociated polar fraction which increased dielectric polarization loss or a combination of both. In addition, very high concentrations were required to achieve appreciable contrast, to the extent that the Grüneisen parameter increased significantly and became a source of contrast. Iron oxide particles were found to produce low but measurable dielectric contrast due to dielectric polarization loss, but this is attributed to the coating of the particles not the iron oxide. Single wall carbon nanotubes did not provide measurable contrast of any type

Detectability prediction for a thermoacoustic sensor in the breazeale nuclear reactor pool

Energy Technology Data Exchange (ETDEWEB)

Smith, James [Idaho National Laboratory, Idaho Falls, ID (United States); Hrisko, Joshua [Idaho National Laboratory, Idaho Falls, ID (United States); Garrett, Steven [Idaho National Laboratory, Idaho Falls, ID (United States)

2016-03-01

Laboratory experiments have suggested that thermoacoustic engines can be in- corporated within nuclear fuel rods. Such engines would radiate sounds that could be used to measure and acoustically-telemeter information about the op- eration of the nuclear reactor (e.g., coolant temperature or uxes of neutrons or other energetic particles) or the physical condition of the nuclear fuel itself (e.g., changes in temperature, evolved gases) that are encoded as the frequency and/or amplitude of the radiated sound [IEEE Measurement and Instrumen- tation 16(3), 18-25 (2013)]. For such acoustic information to be detectable, it is important to characterize the vibroacoustical environments within reactors. Measurements will be presented of the background noise spectra (with and with- out coolant pumps) and reverberation times within the 70,000 gallon pool that cools and shields the fuel in the 1 MW research reactor on Penn State's campus using two hydrophones, a piezoelectric projector, and an accelerometer. Sev- eral signal-processing techniques will be demonstrated to enhance the measured results. Background vibrational measurement were also taken at the 250 MW Advanced Test Reactor, located at the Idaho National Laboratory, using ac- celerometers mounted outside the reactor's pressure vessel and on plumbing will also be presented. The detectability predictions made in the thesis were validated in September 2015 using a nuclear ssion-heated thermoacoustic sensor that was placed in the core of the Breazeale Nuclear Reactor on Penn State's campus. Some features of the thermoacoustic device used in that experiment will also be revealed. [Work supported by the U.S. Department of Energy.

78 FR 18421 - Information Collection Activities; Household Movers' Disclosure Requirements

Science.gov (United States)

2013-03-26

... Burden'' Cost: There will be a startup cost to the remaining approximately 4485 movers/freight forwarders... is estimated at a one-time expense of $2,063,100. Annualized over the three years covered by OMB's... Excess of $100 Per Pound per Article'' that are included in my shipment and that I have given a copy of...

In vivo microwave-based thermoacoustic tomography of rats (Conference Presentation)

Science.gov (United States)

Lin, Li; Zhou, Yong; Wang, Lihong V.

2016-03-01

Microwave-based thermoacoustic tomography (TAT), based on the measurement of ultrasonic waves induced by microwave pulses, can reveal tissue dielectric properties that may be closely related to the physiological and pathological status of the tissues. Using microwaves as the excitation source improved imaging depth because of their deep penetration into biological tissues. We demonstrate, for the first time, in vivo microwave-based thermoacoustic imaging in rats. The transducer is rotated around the rat in a full circle, providing a full two-dimensional view. Instead of a flat ultrasonic transducer, we used a virtual line detector based on a cylindrically focused transducer. A 3 GHz microwave source with 0.6 µs pulse width and an electromagnetically shielded transducer with 2.25 MHz central frequency provided clear cross-sectional images of the rat's body. The high imaging contrast, based on the tissue's rate of absorption, and the ultrasonically defined spatial resolution combine to reveal the spine, kidney, muscle, and other deeply seated anatomical features in the rat's abdominal cavity. This non-invasive and non-ionizing imaging modality achieved an imaging depth beyond 6 cm in the rat's tissue. Cancer diagnosis based on information about tissue properties from microwave band TAT can potentially be more accurate than has previously been achievable.

Development of a Thermoacoustic Stirling Engine Technology Demonstrator

Science.gov (United States)

Reissner, Alexander; Gerger, Joachim; Hummel, Stefan; Reißig, Jannis; Pawelke, Roland

2014-08-01

Waste heat is a primary source of energy loss in many aerospace and terrestrial applications. FOTEC, an Austrian Research Company located in Wiener Neustadt, is presently developing a micro power converter, promising high efficiencies even for small- scale applications. The converter is based on an innovative thermoacoustic stirling engine concept without any moving parts. Such a maintenance-free engine system would be particularly suitable for advanced space power systems (radioisotope, waste heat) or even within the scope of terrestrial energy harvesting. This paper will summarizes the status of our ongoing efforts on this micro power converter technology.

A technical survey of power generation from biogas

International Nuclear Information System (INIS)

1996-01-01

The objectives of this survey are: to review the use of biogas (ie landfill gas, sewage gas and farm gas) for power generation, mainly in the UK. To assess the performance of prime movers and the status and need for biogas pre-treatment. To review legislation with regard to emissions both in the UK and overseas. To provide a framework of good practice for choosing prime movers fuelled by biogas. (author)

CLIC main beam quadrupole active pre-alignment based on cam movers

CERN Document Server

Kemppinen, J; Leuxe, R; Mainaud Durand, H; Sandomierski, J; Sosin, M

2012-01-01

Compact Linear Collider (CLIC) is a study for a future 48 km long linear electron-positron collider in the multi TeV range. Its target luminosity can only be reached if the main beam quadrupoles (MB quads) are actively pre-aligned within 17 µm in sliding windows of 200 m with respect to a straight reference line. In addition to the positioning requirement, the pre-alignment system has to provide a rigid support for the nano-stabilization system to ensure that the first eigenfrequency is above 100 Hz. Re-adjustment based on cam movers was chosen for detailed studies to meet the stringent pre-alignment requirements. There are four different types of MB quads in CLIC. Their lengths and masses vary so that at least two types of cam movers have to be developed. The validation of the cams with less stringent space restrictions has proceeded to a test setup in 5 degrees of freedom (DOF). Prototypes of the more demanding, smaller cams have been manufactured and they are under tests in 1 DOF. This paper describes the...

Thermoacoustic refrigerators and engines comprising cascading stirling thermodynamic units

Science.gov (United States)

Backhaus, Scott; Swift, Greg

2013-06-25

The present invention includes a thermoacoustic assembly and method for improved efficiency. The assembly has a first stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator and at least one additional heat exchanger. The first stage Stirling thermal unit is serially coupled to a first end of a quarter wavelength long coupling tube. A second stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator, and at least one additional heat exchanger, is serially coupled to a second end of the quarter wavelength long coupling tube.

Synthetical optimization of hydraulic radius and acoustic field for thermoacoustic cooler

International Nuclear Information System (INIS)

Kang Huifang; Li Qing; Zhou Gang

2009-01-01

It is well known that the acoustic field and the hydraulic radius of the regenerator play key roles in thermoacoustic processes. The optimization of hydraulic radius strongly depends on the acoustic field in the regenerator. This paper investigates the synthetical optimization of hydraulic radius and acoustic field which is characterized by the ratio of the traveling wave component to the standing wave component. In this paper, we discussed the heat flux, cooling power, temperature gradient and coefficient of performance of thermoacoustic cooler with different combinations of hydraulic radiuses and acoustic fields. The calculation results show that, in the cooler's regenerator, due to the acoustic wave, the heat is transferred towards the pressure antinodes in the pure standing wave, while the heat is transferred in the opposite direction of the wave propagation in the pure traveling wave. The better working condition for the regenerator appears in the traveling wave phase region of the like-standing wave, where the directions of the heat transfer by traveling wave component and standing wave component are the same. Otherwise, the small hydraulic radius is not a good choice for acoustic field with excessively high ratio of traveling wave, and the small hydraulic radius is only needed by the traveling wave phase region of like-standing wave.

Development of thermoacoustic engine operating by waste heat from cooking stove

Science.gov (United States)

Chen, B. M.; Abakr, Y. A.; Riley, P. H.; Hann, D. B.

2012-06-01

There are about 1.5 billion people worldwide use biomass as their primary form of energy in household cooking[1]. They do not have access to electricity, and are too remote to benefit from grid electrical supply. In many rural communities, stoves are made without technical advancements, mostly using open fires cooking stoves which have been proven to be extremely low efficiency, and about 93% of the energy generated is lost during cooking. The cooking is done inside a dwelling and creates significant health hazard to the family members and pollution to environment. SCORE (www.score.uk.com) is an international collaboration research project to design and build a low-cost, high efficiency woodstove that uses about half amount of the wood of an open wood fire, and uses the waste heat of the stove to power a thermoacoustic engine (TAE) to produce electricity for applications such as LED lighting, charging mobile phones or charging a 12V battery. This paper reviews on the development of two types of the thermoacoustic engine powered by waste heat from cooking stove which is either using Propane gas or burning of wood as a cooking energy to produce an acceptable amount of electricity for the use of rural communities.

Experimental evaluation of DC electric field effect on the thermoacoustic behaviour of flat premixed flames

NARCIS (Netherlands)

Volkov, E.N.; Kornilov, V.N.; Goey, de L.P.H.

2013-01-01

One promising approach to eliminate thermoacoustic instabilities in combustion appliances is the use of adaptive control of the flame/burner acoustic transfer function (TF). Application of a DC electric field (EF) as a spatially distributed, easily and quickly adjustable and low-energy method to

Thermo-acoustic characterization of the burner-turbine interface in a can-annular combustor using CFD

NARCIS (Netherlands)

Farisco, Federica

2016-01-01

Thermo-acoustic instabilities in high power density gas turbine engines need to be understood to avoid unexpected shutdown events. This dissertation is focused on the combustor-turbine interaction for acoustic waves. The first part of the study is based on the acoustic reflection coefficient

A Preliminary Assessment of the Initial Compression Power Requirement in CO2 Pipeline “Carbon Capture and Storage (CCS Technologies”

Directory of Open Access Journals (Sweden)

Abdussalam El-Suleiman

2016-05-01

Full Text Available CO2 captured from fossil-fueled power generation plants is said to be economically transported via pipelines over long distances. The CO2 must be compressed to pipeline specifications using compressors and pumps that are driven by gas turbine (GT or other prime movers. This paper presents the evaluation of actual work transfer or required prime power by modeling the governing equations of compression using the Peng–Robinson equation of state (PR-EOS. A computer code was developed to carry out the modeling and subsequent simulation of the compression power requirement. The simulation of prime mover power was carried out for different technology (head per stage of the compressor ranging from 10-staged compression to double stage compression. The results show that the current technology of the centrifugal compressor could require as much as 23MW of prime mover power to compress 1.5 million tonnes per year of CO2—a projected equivalent CO2 released from a 530MW combined cycle gas turbine (CCGT power generation plant.

Thermoacoustic Molecular Imaging of Small Animals

Directory of Open Access Journals (Sweden)

Robert A. Kruger

2003-04-01

Full Text Available We have designed, constructed, and tested a thermoacoustic computed tomography (TCT scanner for imaging optical absorption in small animals in three dimensions. The device utilizes pulsed laser irradiation (680–1064 nm and a unique, 128-element transducer array. We quantified the isotropic spatial resolution of this scanner to be 0.35 mm. We describe a dual-wavelength subtraction technique for isolating optical dyes with TCT. Phantom experiments demonstrate that we can detect 5 fmol of a near-infrared dye (indocyanine green, ICG in a 1-ML volume using dual-wavelength subtraction. Initial TCT imaging in phantoms and in two sacrificed mice suggests that three-dimensional, optical absorption patterns in small animals can be detected with an order of magnitude better spatial resolution and an order of magnitude better low-contrast detectability in small animals when compared to fluorescence imaging or diffusion optical tomography.

Space-Efficient Approximation Scheme for Circular Earth Mover Distance

DEFF Research Database (Denmark)

Brody, Joshua Eric; Liang, Hongyu; Sun, Xiaoming

2012-01-01

The Earth Mover Distance (EMD) between point sets A and B is the minimum cost of a bipartite matching between A and B. EMD is an important measure for estimating similarities between objects with quantifiable features and has important applications in several areas including computer vision...... to computer vision [13] and can be seen as a special case of computing EMD on a discretized grid. We achieve a (1 ±ε) approximation for EMD in $\\tilde O(\\varepsilon^{-3})$ space, for every 0 ... that matches the space bound asked in [9]....

Thermoacoustic tomography for an integro-differential wave equation modeling attenuation

Science.gov (United States)

Acosta, Sebastián; Palacios, Benjamín

2018-02-01

In this article we study the inverse problem of thermoacoustic tomography (TAT) on a medium with attenuation represented by a time-convolution (or memory) term, and whose consideration is motivated by the modeling of ultrasound waves in heterogeneous tissue via fractional derivatives with spatially dependent parameters. Under the assumption of being able to measure data on the whole boundary, we prove uniqueness and stability, and propose a convergent reconstruction method for a class of smooth variable sound speeds. By a suitable modification of the time reversal technique, we obtain a Neumann series reconstruction formula.

First mover advantages in mobile telecommunications: Evidence from OECD countries

OpenAIRE

Muck, Johannes; Heimeshoff, Ulrich

2012-01-01

We explore the existence of first mover advantages in mobile telecommunications markets. Building on a data set comprising monthly penetration rates, market concentration, number of active operators, and market shares of 90 followers from 33 OECD countries, we estimate a dynamic growth model. Our analysis delivers five key results. Regarding a follower's longrun market share, we observe that (1) the penetration rate at the time of market entry exerts an inverted u-shaped effect, suggesting th...

Movers and stayers: The geography of residential mobility and CVD hospitalisations in Auckland, New Zealand.

Science.gov (United States)

Exeter, Daniel J; Sabel, Clive E; Hanham, Grant; Lee, Arier C; Wells, Susan

2015-05-01

The association between area-level disadvantage and health and social outcomes is unequivocal. However, less is known about the health impact of residential mobility, particularly at intra-urban scales. We used an encrypted National Health Index (eNHI) number to link individual-level data recorded in routine national health databases to construct a cohort of 641,532 participants aged 30+ years to investigate the association between moving and CVD hospitalisations in Auckland, New Zealand. Residential mobility was measured for participants according to changes in the census Meshblock of usual residence, obtained from the Primary Health Organisation (PHO) database for every calendar quarter between 1/1/2006 and 31/12/2012. The NZDep2006 area deprivation score at the start and end of a participant's inclusion in the study was used to measure deprivation mobility. We investigated the relative risk of movers being hospitalised for CVD relative to stayers using multi-variable binomial regression models, controlling for age, gender, deprivation and ethnicity. Considered together, movers were 1.22 (1.19-1.26) times more likely than stayers to be hospitalised for CVD. Using the 5×5 deprivation origin-destination matrix to model a patient's risk of CVD based on upward, downward or sideways deprivation mobility, movers within the least deprived (NZDep2006 Quintile 1) areas were 10% less likely than stayers to be hospitalised for CVD, while movers within the most deprived (NZDep2006 Q5) areas were 45% more likely than stayers to have had their first CVD hospitalisation in 2006-2012 (RR: 1.45 [1.35-1.55]). Participants who moved upward also had higher relative risks of having a CVD event, although their risk was less than those observed for participants experiencing downward deprivation mobility. This research suggests that residential mobility is an important determinant of CVD in Auckland. Further investigation is required to determine the impact moving has on the risk of

Adjoint-based sensitivity analysis of low-order thermoacoustic networks using a wave-based approach

Science.gov (United States)

Aguilar, José G.; Magri, Luca; Juniper, Matthew P.

2017-07-01

Strict pollutant emission regulations are pushing gas turbine manufacturers to develop devices that operate in lean conditions, with the downside that combustion instabilities are more likely to occur. Methods to predict and control unstable modes inside combustion chambers have been developed in the last decades but, in some cases, they are computationally expensive. Sensitivity analysis aided by adjoint methods provides valuable sensitivity information at a low computational cost. This paper introduces adjoint methods and their application in wave-based low order network models, which are used as industrial tools, to predict and control thermoacoustic oscillations. Two thermoacoustic models of interest are analyzed. First, in the zero Mach number limit, a nonlinear eigenvalue problem is derived, and continuous and discrete adjoint methods are used to obtain the sensitivities of the system to small modifications. Sensitivities to base-state modification and feedback devices are presented. Second, a more general case with non-zero Mach number, a moving flame front and choked outlet, is presented. The influence of the entropy waves on the computed sensitivities is shown.

Reinforcement Learning for a New Piano Mover

Directory of Open Access Journals (Sweden)

Yuko Ishiwaka

2005-08-01

Full Text Available We attempt to achieve corporative behavior of autonomous decentralized agents constructed via Q-Learning, which is a type of reinforcement learning. As such, in the present paper, we examine the piano mover's problem. We propose a multi-agent architecture that has a training agent, learning agents and intermediate agent. Learning agents are heterogeneous and can communicate with each other. The movement of an object with three kinds of agent depends on the composition of the actions of the learning agents. By learning its own shape through the learning agents, avoidance of obstacles by the object is expected. We simulate the proposed method in a two-dimensional continuous world. Results obtained in the present investigation reveal the effectiveness of the proposed method.

The Biggest Mover: Empowering Students with Intellectual and Developmental Delays and Physical Challenges

Science.gov (United States)

Brown, Michelle J.

2018-01-01

The Biggest Mover Program, an educational program to improve daily exercise and healthy eating was developed to address the learning needs of students with intellectual and developmental disabilities and physical challenges. The program was part of a three-part program to improve the knowledge of students, staff, and teachers through the use of…

Influence of thermodynamic properties of a thermo-acoustic emitter on the efficiency of thermal airborne ultrasound generation.

Science.gov (United States)

Daschewski, M; Kreutzbruck, M; Prager, J

2015-12-01

In this work we experimentally verify the theoretical prediction of the recently published Energy Density Fluctuation Model (EDF-model) of thermo-acoustic sound generation. Particularly, we investigate experimentally the influence of thermal inertia of an electrically conductive film on the efficiency of thermal airborne ultrasound generation predicted by the EDF-model. Unlike widely used theories, the EDF-model predicts that the thermal inertia of the electrically conductive film is a frequency-dependent parameter. Its influence grows non-linearly with the increase of excitation frequency and reduces the efficiency of the ultrasound generation. Thus, this parameter is the major limiting factor for the efficient thermal airborne ultrasound generation in the MHz-range. To verify this theoretical prediction experimentally, five thermo-acoustic emitter samples consisting of Indium-Tin-Oxide (ITO) coatings of different thicknesses (from 65 nm to 1.44 μm) on quartz glass substrates were tested for airborne ultrasound generation in a frequency range from 10 kHz to 800 kHz. For the measurement of thermally generated sound pressures a laser Doppler vibrometer combined with a 12 μm thin polyethylene foil was used as the sound pressure detector. All tested thermo-acoustic emitter samples showed a resonance-free frequency response in the entire tested frequency range. The thermal inertia of the heat producing film acts as a low-pass filter and reduces the generated sound pressure with the increasing excitation frequency and the ITO film thickness. The difference of generated sound pressure levels for samples with 65 nm and 1.44 μm thickness is in the order of about 6 dB at 50 kHz and of about 12 dB at 500 kHz. A comparison of sound pressure levels measured experimentally and those predicted by the EDF-model shows for all tested emitter samples a relative error of less than ±6%. Thus, experimental results confirm the prediction of the EDF-model and show that the model can

Promoting an "Active Start" for Young Children: Developing Competent and Confident Early Movers

Science.gov (United States)

Goodway, Jacqueline D.; Wall, Sarah; Getchell, Nancy

2009-01-01

With childhood obesity and physical inactivity at an all-time high, parents and physical educators alike must look to the early years to promote competent and confident young movers. Popular opinion believes that children are naturally active and motor skill development progresses as a normal function of getting older. However, if one looks at…

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

Directory of Open Access Journals (Sweden)

Xuesong LUO

2018-05-01

Full Text Available A tubular moving-magnet linear oscillating motor (TMMLOM has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones. Keywords: Air-gap flux density, Linear motor, Mover gaps, Quasi-Halbach array, Thrust output, Tubular moving-magnet linear oscillating motor (TMMLOM

Thermo-acoustic instabilities in lean premixed swirl-stabilized combustion and their link to acoustically coupled and decoupled flame macrostructures

KAUST Repository

Taamallah, Soufien; LaBry, Zachary A.; Shanbhogue, Santosh J.; Ghoniem, Ahmed F.

2015-01-01

© 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved. We investigate the onset of thermo-acoustic instabilities and their link to the mean flame configurations - or macrostructures - under acoustically coupled

Fault tolerant linear actuator

Science.gov (United States)

Tesar, Delbert

2004-09-14

In varying embodiments, the fault tolerant linear actuator of the present invention is a new and improved linear actuator with fault tolerance and positional control that may incorporate velocity summing, force summing, or a combination of the two. In one embodiment, the invention offers a velocity summing arrangement with a differential gear between two prime movers driving a cage, which then drives a linear spindle screw transmission. Other embodiments feature two prime movers driving separate linear spindle screw transmissions, one internal and one external, in a totally concentric and compact integrated module.

Reexamining unconscious response priming: A liminal-prime paradigm.

Science.gov (United States)

Avneon, Maayan; Lamy, Dominique

2018-03-01

Research on the limits of unconscious processing typically relies on the subliminal-prime paradigm. However, this paradigm is limited in the issues it can address. Here, we examined the implications of using the liminal-prime paradigm, which allows comparing unconscious and conscious priming with constant stimulation. We adapted an iconic demonstration of unconscious response priming to the liminal-prime paradigm. On the one hand, temporal attention allocated to the prime and its relevance to the task increased the magnitude of response priming. On the other hand, the longer RTs associated with the dual task inherent to the paradigm resulted in response priming being underestimated, because unconscious priming effects were shorter-lived than conscious-priming effects. Nevertheless, when the impact of long RTs was alleviated by considering the fastest trials or by imposing a response deadline, conscious response priming remained considerably larger than unconscious response priming. These findings suggest that conscious perception strongly modulates response priming. Copyright © 2017 Elsevier Inc. All rights reserved.

Monte Carlo problem and parallel computers, and how to do a fast particle mover on the STAR 100

International Nuclear Information System (INIS)

Sinz, K.H.P.H.

1975-01-01

Particle simulation problems of the Monte Carlo type are widely believed to be intrinsically highly scalar problems. In the absence of a definitive mathematical theorem to the contrary, this belief is based on the very apparent programming difficulties encountered on a vector machine. This class of problem is therefore thought to be ill-suited to highly parallel and vectorized computers. However, it is demonstrated by several examples that a particle mover is fully vectorizable. In the case of the CDC STAR 100 it is found that the performance of such a particle mover is not hopeless but hopeful, and is in fact helpful. One of the several possible vectorizations is estimated to yield a gain of a factor of 15 on the STAR over good serial coding on the same machine. This falls far short of the STAR's peak vector performance of 30 to 70 times scalar rates because certain fast vector instructions are not available and have to be simulated. The current STAR algorithm outperforms the carefully handcoded 7600 by a factor of 3. This performance margin is achievable despite the 7600's fivefold superior scalar capability. A more generally vectorized particle mover will always substantially outperform scalar coding on any machine equipped with a properly chosen set of fast vector instructions. (U.S.)

Correspondence Between Uncoupled Flame Macrostructures and Thermoacoustic Instability in Premixed Swirl-Stabilized Combustion

KAUST Repository

Taamallah, Soufien

2014-06-16

In this paper, we conduct an experimental investigation of a confined premixed swirl-stabilized dump combustor similar to those found in modern gas turbines. We operate the combustor with premixed methane-air in the lean range of equivalence ratio ϕ ∈ [0.5–0.75]. First, we observe different dynamic modes in the lean operating range, as the equivalence ratio is raised, confirming observations made previously in a similar combustor geometry but with a different fuel [1]. Next we examine the correspondence between dynamic mode transitions and changes in the mean flame configuration or macrostructure. We show that each dynamic mode is associated with a specific flame macrostructure. By modifying the combustor length without changing the underlying flow, the resonant frequencies of the geometry are altered allowing for decoupling the heat release fluctuations and the acoustic field, in a certain range of equivalence ratio. Mean flame configurations in the modified (short) combustor and for the same range of equivalence ratio are examined. It is found that not only the same sequence of flame configurations is observed in both combustors (long and short) but also that the set of equivalence ratio where transitions in the flame configuration occur is closely related to the onset of thermo-acoustic instabilities. For both combustor lengths, the flame structure changes at similar equivalence ratio whether thermo-acoustic coupling is allowed or not, suggesting that the flame configuration holds the key to understanding the onset of self-excited thermo-acoustic instability in this range. Finally, we focus on the flame configuration transition that was correlated with the onset of the first dynamically unstable mode ϕ ∈ [0.61–0.64]. Our analysis of this transition in the short, uncoupled combustor shows that it is associated with an intermittent appearance of a flame in the outer recirculation zone (ORZ). The spectral analysis of this “ORZ flame flickering” �

Correspondence Between Uncoupled Flame Macrostructures and Thermoacoustic Instability in Premixed Swirl-Stabilized Combustion

KAUST Repository

Taamallah, Soufien; LaBry, Zachary A.; Shanbhogue, Santosh J.; Ghoniem, Ahmed F.

2014-01-01

In this paper, we conduct an experimental investigation of a confined premixed swirl-stabilized dump combustor similar to those found in modern gas turbines. We operate the combustor with premixed methane-air in the lean range of equivalence ratio ϕ ∈ [0.5–0.75]. First, we observe different dynamic modes in the lean operating range, as the equivalence ratio is raised, confirming observations made previously in a similar combustor geometry but with a different fuel [1]. Next we examine the correspondence between dynamic mode transitions and changes in the mean flame configuration or macrostructure. We show that each dynamic mode is associated with a specific flame macrostructure. By modifying the combustor length without changing the underlying flow, the resonant frequencies of the geometry are altered allowing for decoupling the heat release fluctuations and the acoustic field, in a certain range of equivalence ratio. Mean flame configurations in the modified (short) combustor and for the same range of equivalence ratio are examined. It is found that not only the same sequence of flame configurations is observed in both combustors (long and short) but also that the set of equivalence ratio where transitions in the flame configuration occur is closely related to the onset of thermo-acoustic instabilities. For both combustor lengths, the flame structure changes at similar equivalence ratio whether thermo-acoustic coupling is allowed or not, suggesting that the flame configuration holds the key to understanding the onset of self-excited thermo-acoustic instability in this range. Finally, we focus on the flame configuration transition that was correlated with the onset of the first dynamically unstable mode ϕ ∈ [0.61–0.64]. Our analysis of this transition in the short, uncoupled combustor shows that it is associated with an intermittent appearance of a flame in the outer recirculation zone (ORZ). The spectral analysis of this “ORZ flame flickering” �

The impact of stack geometry and mean pressure on cold end temperature of stack in thermoacoustic refrigeration systems

Science.gov (United States)

Wantha, Channarong

2018-02-01

This paper reports on the experimental and simulation studies of the influence of stack geometries and different mean pressures on the cold end temperature of the stack in the thermoacoustic refrigeration system. The stack geometry was tested, including spiral stack, circular pore stack and pin array stack. The results of this study show that the mean pressure of the gas in the system has a significant impact on the cold end temperature of the stack. The mean pressure of the gas in the system corresponds to thermal penetration depth, which results in a better cold end temperature of the stack. The results also show that the cold end temperature of the pin array stack decreases more than that of the spiral stack and circular pore stack geometry by approximately 63% and 70%, respectively. In addition, the thermal area and viscous area of the stack are analyzed to explain the results of such temperatures of thermoacoustic stacks.

Masked priming effect reflects evidence accumulated by the prime.

Science.gov (United States)

Kinoshita, Sachiko; Norris, Dennis

2010-01-01

In the same-different match task, masked priming is observed with the same responses but not different responses. Norris and Kinoshita's (2008) Bayesian reader account of masked priming explains this pattern based on the same principle as that explaining the absence of priming for nonwords in the lexical decision task. The pattern of priming follows from the way the model makes optimal decisions in the two tasks; priming does not depend on first activating the prime and then the target. An alternative explanation is in terms of a bias towards responding "same" that exactly counters the facilitatory effect of lexical access. The present study tested these two views by varying both the degree to which the prime predicts the response and the visibility of the prime. Unmasked primes produced effects expected from the view that priming is influenced by the degree to which the prime predicts the response. In contrast, with masked primes, the size of priming for the same response was completely unaffected by predictability. These results rule out response bias as an explanation of the absence of masked priming for different responses and, in turn, indicate that masked priming is not a consequence of automatic lexical access of the prime.

Flame Interactions and Thermoacoustics in Multiple-Nozzle Combustors

Science.gov (United States)

Dolan, Brian

The first major chapter of original research (Chapter 3) examines thermoacoustic oscillations in a low-emission staged multiple-nozzle lean direct injection (MLDI) combustor. This experimental program investigated a relatively practical combustor sector that was designed and built as part of a commercial development program. The research questions are both practical, such as under what conditions the combustor can be safely operated, and fundamental, including what is most significant to driving the combustion oscillations in this system. A comprehensive survey of operating conditions finds that the low-emission (and low-stability) intermediate and outer stages are necessary to drive significant thermoacoustics. Phase-averaged and time-resolved OH* imaging show that dramatic periodic strengthening and weakening of the reaction zone downstream of the low-emission combustion stages. An acoustic modal analysis shows the pressure wave shapes and identifies the dominant thermoacoustic behavior as the first longitudinal mode for this combustor geometry. Finally, a discussion of the likely significant coupling mechanisms is given. Periodic reaction zone behavior in the low-emission fuel stages is the primary contributor to unsteady heat release. Differences between the fuel stages in the air swirler design, the fuel number of the injectors, the lean blowout point, and the nominal operating conditions all likely contribute to the limit cycle behavior of the low-emission stages. Chapter 4 investigates the effects of interaction between two adjacent swirl-stabilized nozzles using experimental and numerical tools. These studies are more fundamental; while the nozzle hardware is the same as the lean direct injection nozzles used in the MLDI combustion concept, the findings are generally applicable to other swirl-stabilized combustion systems as well. Much of the work utilizes a new experiment where the distance between nozzles was varied to change the level of interaction

Becoming a First Mover in Green Electricity Supply: Corporate Change Driven by Liberalisation and Climate Change

NARCIS (Netherlands)

Hofman, Peter

2003-01-01

This paper presents a study of a trend-setting company in the electricity sector in the Netherlands and its innovative response to the combined influence of liberalisation and climate change. The company became a first mover through its invention of the concept of green electricity and the

Stochastic Learning of Multi-Instance Dictionary for Earth Mover's Distance based Histogram Comparison

OpenAIRE

Fan, Jihong; Liang, Ru-Ze

2016-01-01

Dictionary plays an important role in multi-instance data representation. It maps bags of instances to histograms. Earth mover's distance (EMD) is the most effective histogram distance metric for the application of multi-instance retrieval. However, up to now, there is no existing multi-instance dictionary learning methods designed for EMD based histogram comparison. To fill this gap, we develop the first EMD-optimal dictionary learning method using stochastic optimization method. In the stoc...

Assessment of Methane Emissions – Impact of Using Natural Gas Engines in Unconventional Resource Development

Energy Technology Data Exchange (ETDEWEB)

Nix, Andrew [West Virginia Univ., Morgantown, WV (United States); Johnson, Derek [West Virginia Univ., Morgantown, WV (United States); Heltzel, Robert [West Virginia Univ., Morgantown, WV (United States); Oliver, Dakota [West Virginia Univ., Morgantown, WV (United States)

2018-04-08

Researchers at the Center for Alternative Fuels, Engines, and Emissions (CAFEE) completed a multi-year program under DE-FE0013689 entitled, “Assessing Fugitive Methane Emissions Impact Using Natural Gas Engines in Unconventional Resource Development.” When drilling activity was high and industry sought to lower operating costs and reduce emissions they began investing in dual fuel and dedicated natural gas engines to power unconventional well equipment. From a review of literature we determined that the prime-movers (or major fuel consumers) of unconventional well development were the service trucks (trucking), horizontal drilling rig (drilling) engines, and hydraulic stimulation pump (fracturing) engines. Based on early findings from on-road studies we assessed that conversion of prime movers to operate on natural gas could contribute to methane emissions associated with unconventional wells. As such, we collected significant in-use activity data from service trucks and in-use activity, fuel consumption, and gaseous emissions data from drilling and fracturing engines. Our findings confirmed that conversion of the prime movers to operate as dual fuel or dedicated natural gas – created an additional source of methane emissions. While some gaseous emissions were decreased from implementation of these technologies – methane and CO2 equivalent emissions tended to increase, especially for non-road engines. The increases were highest for dual fuel engines due to methane slip from the exhaust and engine crankcase. Dedicated natural gas engines tended to have lower exhaust methane emissions but higher CO2 emissions due to lower efficiency. Therefore, investing in currently available natural gas technologies for prime movers will increase the greenhouse gas footprint of the unconventional well development industry.

Indiana University high energy physics, Task A

International Nuclear Information System (INIS)

Brabson, B.; Crittenden, R.; Dzierba, A.; Hanson, G.; Martin, H.; Marshall, T.; Mir, R.; Mouthy, T.; Ogren, H.; Rust, D.; Teige, S.; Zieminska, D.; Zieminski, A.

1992-01-01

During this reporting period the group has been carrying out programs in several areas. These are presented in this paper is follows: The group was a collaborator in the Mark II experiment at the SLC and completed analysis on the experiment. Three students completed their theses this reporting period; the group is the prime mover in (E672), a high mass dimuon experiment which now in its final data collection period. Our group is also a collaborator in the DO collider experiment which is now preparing for the first data run in 1992; the group is a collaborator in the OPAL experiment at LEP which is now taking data. The group also is working on the development of a major offline facility shift and on a silicon vertex chamber for 1993; the group is the prime mover in the construction of a major new experiment (E852) in precision meson spectroscopy. A test run is presently underway and data taking will begin in 1993; and the group is a prime mover in the tracking design of the SDC experiment. The SDC has completed the Technical Design report. Construction will begin in 1993

Modeling of customer adoption of distributed generation in Japan

International Nuclear Information System (INIS)

Asano, Hiroshi; Nishio, Ken-ichiro; Imanaka, Takeo; Imamura, Ei-ichi

2005-01-01

This paper presents the modeling of customer adoption of distributed generation (DG) in industrial and residential sectors in Japan. We classified the DG market into an existing industrial DG market that is based on conventional prime movers (steam turbines, diesel engines, gas turbines, and gas engines) and a new residential DG market that is based on micro gas engines and fuel cell technology. Customers adopt self-generation considering the different prime movers and thermally activated equipment, fuel choice, growth of industrial output, and energy demand. The trend of the installed capacity of each prime mover shows different diffusion patterns. We conducted regression analysis of time-series data of self-generating facilities for the period from 1983 to 2001. We also modeled residential customer adoption of polymer electrolyte fuel cells and micro engine cogeneration systems (CGSs) until 2020. The feature of this model is the dynamic choice of multiple technologies such as gas CGSs and heat-pump water heaters. Sensitivity analysis of energy efficiency and the initial cost of energy systems for technology diffusion reveal alternative penetration paths and impacts on energy consumption and CO2 emission. (Author)

Exploring the existence of a stayer population with mover-stayer counting process models: application to joint damage in psoriatic arthritis.

Science.gov (United States)

Yiu, Sean; Farewell, Vernon T; Tom, Brian D M

2017-08-01

Many psoriatic arthritis patients do not progress to permanent joint damage in any of the 28 hand joints, even under prolonged follow-up. This has led several researchers to fit models that estimate the proportion of stayers (those who do not have the propensity to experience the event of interest) and to characterize the rate of developing damaged joints in the movers (those who have the propensity to experience the event of interest). However, when fitted to the same data, the paper demonstrates that the choice of model for the movers can lead to widely varying conclusions on a stayer population, thus implying that, if interest lies in a stayer population, a single analysis should not generally be adopted. The aim of the paper is to provide greater understanding regarding estimation of a stayer population by comparing the inferences, performance and features of multiple fitted models to real and simulated data sets. The models for the movers are based on Poisson processes with patient level random effects and/or dynamic covariates, which are used to induce within-patient correlation, and observation level random effects are used to account for time varying unobserved heterogeneity. The gamma, inverse Gaussian and compound Poisson distributions are considered for the random effects.

Numerical Predictions of Early Stage Turbulence in Oscillatory Flow across Parallel-Plate Heat Exchangers of a Thermoacoustic System

Directory of Open Access Journals (Sweden)

Fatimah A. Z. Mohd Saat

2017-06-01

Full Text Available This work focuses on the predictions of turbulent transition in oscillatory flow subjected to temperature gradients, which often occurs within heat exchangers of thermoacoustic devices. A two-dimensional computational fluid dynamics (CFD model was developed in ANSYS FLUENT and validated using the earlier experimental data. Four drive ratios (defined as maximum pressure amplitude to mean pressure were investigated: 0.30%, 0.45%, 0.65% and 0.83%. It has been found that the introduction of the turbulence model at a drive ratio as low as 0.45% improves the predictions of flow structure compared to experiments, which indicates that turbulent transition may occur at much smaller flow amplitudes than previously thought. In the current investigation, the critical Reynolds number based on the thickness of Stokes’ layer falls in the range between 70 and 100. The models tested included four variants of the RANS (Reynolds-Averaged Navier–Stokes equations: k-ε, k-ω, shear-stress-transport (SST-k-ω and transition-SST, the laminar model being used as a reference. Discussions are based on velocity profiles, vorticity plots, viscous dissipation and the resulting heat transfer and their comparison with experimental results. The SST-k-ω turbulence model and, in some cases, transition-SST provide the best fit of the velocity profile between numerical and experimental data (the value of the introduced metric measuring the deviation of the CFD velocity profiles from experiment is up to 43% lower than for the laminar model and also give the best match in terms of calculated heat flux. The viscous dissipation also increases with an increase of the drive ratio. The results suggest that turbulence should be considered when designing thermoacoustic devices even in low-amplitude regimes in order to improve the performance predictions of thermoacoustic systems.

Cam Mover Alignment System positioning with the Wire Positioning with the Wire Position Sensor Feedback for CLIC

CERN Document Server

AUTHOR|(CDS)2077936; Mainaud Durand, Helene; Kostka, Z.S.

2016-01-01

Compact Linear Collider (CLIC) is a study of an electron-positron collider with nominal energy of 3 TeV and luminosity of 2 ∙ 1034 cm-2s-1. The luminosity goal leads to stringent alignment requirements for single quadrupole magnets. Vertical and lateral offset deviations with regards to a given orbit reference in both ends of a quadrupole shall be below 1 μm and quadrupole roll deviation shall be below 100 μrad. Translation in the direction of particle beam is not controlled but mechanically locked. A parallel kinematic platform based on cam movers was chosen as system for detailed studies. Earlier studies have shown that cam movers can reach the CLIC requirements through an iterative process. The paper presents new modular off-the-shelf control electronics and software including three optional positioning algorithms based on iterations as well as a more advanced algorithm which can reach target position in one movement. The advanced algorithm reads wire position sensors (WPS), calculates quadrupole orien...

Transposed-Letter Priming Effects with Masked Subset Primes: A Re-Examination of the "Relative Position Priming Constraint"

Science.gov (United States)

Stinchcombe, Eric J.; Lupker, Stephen J.; Davis, Colin J.

2012-01-01

Three experiments are reported investigating the role of letter order in orthographic subset priming (e.g., "grdn"-GARDEN) using both the conventional masked priming technique as well as the sandwich priming technique in a lexical decision task. In all three experiments, subset primes produced priming with the effect being considerably…

Effect of Dynamic Pressure on the Performance of Thermoacoustic Refrigerator with Aluminium (Al) Resonator

Science.gov (United States)

Arya, Bheemsha; Nayak, B. Ramesh; Shivakumara, N. V.

2018-04-01

In practice the refrigerants are being used in the conventional refrigeration system to get the required cooling effect. These refrigerants produce Chlorofluorocarbons (CFCs) and Hydro chlorofluorocarbons (HCFCs) which are highly harmful to the environment, particularly depleting of ozone layers resulting in green house emissions. In order to overcome these effects, the research needs to be focused on the development of an ecofriendly refrigeration system. The thermoacoustic refrigeration system is one among such system where the sound waves are used to compress and expand the gas particles. This study focuses on the effect of dynamic pressure on the thermoacoustic refrigerator made of aluminium with overall length of 748.82 mm, and the entire inner surface of the resonator tube was coated with 2mm thickness of polyurethane to minimize the heat losses to the atmosphere. Experiments were conducted with different stack geometries i.e. parallel plates having 0.119 mm thick with spacing between the plates maintained at 0.358 mm, 1mm diameter pipes, 2mm diameter pipes and 4 mm diameter pipes. Experiments were also conducted with different drive ratios of 0.6%, 1% and 1.6% for a constant dynamic pressure of 2 bar and 10 bar for helium and air as working medium. The results were plotted with the help of graphs, the variation of coefficient of performance (COP) and the relative coefficient of performance (COPR) for the above said conditions were calculated.

Thermoacoustic instability of a laminar premixed flame in Rijke tube with a hydrodynamic region

Science.gov (United States)

Zhao, Dan; Chow, Z. H.

2013-07-01

In this work, a Rijke tube with a hydrodynamic region confined is considered to investigate its non-normality and the effect of the hydrodynamic region on the system stability behaviors. Experiments are first conducted on Rijke tubes with different lengths. It is found that the fundamental mode frequency is decreased and then increased, as the flame is placed at different axial positions at the bottom half of the tube. This trend agrees well with the prediction from the thermoacoustic model developed, of which the hydrodynamic region is modelled as an oscillating 'airplug' and the flame dynamics is captured by using classical G-equation. In addition, the flame as measured is found to respond differently to oncoming acoustic disturbances. Modal and non-modal stability analyses are then conducted to determine the eigenmode growth rate and the transient one of acoustic disturbances. The 'safest' and most 'dangerous' flame locations as defined as those corresponding to extreme eigenmode and transient growth rate are estimated, and compared with those from the model without the hydrodynamic region. In order to mitigate such detrimental oscillations, identification and mitigation algorithms are experimentally implemented on the Rijke tube. The sound pressure level is reduced by approximately 50 dB. To gain insights on the thermoacoustic system, transfer function of the actuated Rijke tube system is measured by injecting a broad-band white noise. Compared with the estimation from our model, good agreement is observed. Finally, the marginal stability regions are estimated.

Complexity, Competitive Intelligence and the "First Mover" Advantage

Science.gov (United States)

Fellman, Philip Vos; Post, Jonathan Vos

In the following paper we explore some of the ways in which competitive intelligence and game theory can be employed to assist firms in deciding whether or not to undertake international market diversification and whether or not there is an advantage to being a market leader or a market follower overseas. In attempting to answer these questions, we take a somewhat unconventional approach. We first examine how some of the most recent advances in the physical and biological sciences can contribute to the ways in which we understand how firms behave. Subsequently, we propose a formal methodology for competitive intelligence. While space considerations here do not allow for a complete game-theoretic treatment of competitive intelligence and its use with respect to understanding first and second mover advantage in firm internationalization, that treatment can be found in its entirety in the on-line proceedings of the 6th International Conference on Complex Systems at http://knowledgetoday.org/wiki/indec.php/ICCS06/89

Generating Units

Data.gov (United States)

Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

COMPETITIVE DYNAMICS AND EARLY MOVER ADVANTAGES UNDER ECONOMIC RECESSIONS

Directory of Open Access Journals (Sweden)

Roberto Vassolo

2017-02-01

Full Text Available In light of the recent macroeconomic instability in global markets, we examine the evolution of competitive dynamics and firm profitability when industries are subject to recessions. Although ordinary intuition leads most to view recessions as harmful, we highlight conditions under which they enhance the relative value of industry-level supply-side isolating mechanisms, thereby affording early movers significant and sustainable profit advantages vis-à-vis laggards. We observe that the distribution of firm size within the industry switches from a bi-modal distribution (i.e., one dominated by both small and large firms to a right-skewed one (i.e., dominated mostly by large firms in these contexts, thereby signaling the rise of important opportunities in the form of less rivalrous competitive contexts for survivors of recessions. We derive our results from formal modeling and multiple simulation runs.

Validation of CLIC Re-Adjustment System Based on Eccentric Cam Movers One Degree of Freedom Mock-Up

CERN Document Server

Kemppinen, J; Lackner, F

2011-01-01

Compact Linear Collider (CLIC) is a 48 km long linear accelerator currently studied at CERN. It is a high luminosity electron-positron collider with an energy range of 0.5-3 TeV. CLIC is based on a two-beam technology in which a high current drive beam transfers RF power to the main beam accelerating structures. The main beam is steered with quadrupole magnets. To reach CLIC target luminosity, the main beam quadrupoles have to be actively pre-aligned within 17 µm in 5 degrees of freedom and actively stabilised at 1 nm in vertical above 1 Hz. To reach the pre-alignment requirement as well as the rigidity required by nano-stabilisation, a system based on eccentric cam movers is proposed for the re-adjustment of the main beam quadrupoles. Validation of the technique to the stringent CLIC requirements was started with tests in one degree of freedom on an eccentric cam mover. This paper describes the dedicated mock-up as well as the tests and measurements carried out with it. Finally, the test results are present...

Impact of acoustic impedance and flow resistance on the power output capacity of the regenerators in travelling-wave thermoacoustic engines

International Nuclear Information System (INIS)

Yu Zhibin; Jaworski, Artur J.

2010-01-01

This paper considers the role of acoustic impedance, flow resistance, configuration and geometrical dimensions of regenerators on the power produced in travelling-wave thermoacoustic engines. The effects are modelled assuming a pure travelling-wave and ideal gas, which allows defining a pair of dimensionless factors based on the 'net' acoustic power production. Based on the analysis provided, the acoustic power flow in the regenerators is investigated numerically. It is shown that impedance essentially reflects the proportion between the acoustic power produced from heat energy through the thermoacoustic processes and the acoustic power dissipated by viscous and thermal-relaxation effects in the regenerators. Viscous resistance of the regenerator mainly determines the magnitude of the volumetric velocity and then affects the magnitude of acoustic impedance. High impedance and high volumetric velocity are both required in the regenerators for high power engines. The results also show that the optimum transverse dimension of the gas passage exists, but depends on the local acoustic impedance. In principle, it is possible to obtain an optimum combination between these two parameters.

The Prime Numbers Hidden Symmetric Structure and its Relation to the Twin Prime Infinitude and an Improved Prime Number Theorem

CERN Document Server

Mikoss, I

2006-01-01

Due to the sieving process represented by a Secondary Sieving Map; during the generation of the prime numbers, geometric structures with definite symmetries are formed which become evident through their geometrical representations. The study of these structures allows the development of a constructive prime generating formula. This defines a mean prime density yielding a second order recursive and discrete prime producing formula and a second order differential equation whose solutions produce an improved Prime Number Theorem. Applying these results to twin prime pairs is possible to generate a Twin Prime Number Theorem and important conclusions about the infinitude of the twin primes.

Basic principles of thermo-acoustic energy and temporal profile detection of microwave pulses

CERN Document Server

Andreev, V G; Vdovin, V A

2001-01-01

Basic principles of a thermo-acoustic method developed for the detection of powerful microwave pulses of nanosecond duration are discussed.A proposed method is based on the registration of acoustic pulse profile originated from the thermal expansion of the volume where microwave energy was absorbed.The amplitude of excited acoustic transient is proportional to absorbed microwave energy and its temporal profile resembles one of a microwave pulse when certain conditions are satisfied.The optimal regimes of microwave pulse energy detection and sensitivity of acoustic transient registration with piezo-transducer are discussed.It was demonstrated that profile of a microwave pulse could be detected with temporal resolution of 1 - 3 nanosecond.

Reproduction of mouse-pup ultrasonic vocalizations by nanocrystalline silicon thermoacoustic emitter

Science.gov (United States)

Kihara, Takashi; Harada, Toshihiro; Kato, Masahiro; Nakano, Kiyoshi; Murakami, Osamu; Kikusui, Takefumi; Koshida, Nobuyoshi

2006-01-01

As one of the functional properties of ultrasound generator based on efficient thermal transfer at the nanocrystalline silicon (nc-Si) layer surface, its potential as an ultrasonic simulator of vocalization signals is demonstrated by using the acoustic data of mouse-pup calls. The device composed of a surface-heating thin-film electrode, an nc-Si layer, and a single-crystalline silicon (c-Si) wafer, exhibits an almost completely flat frequency response over a wide range without any mechanical surface vibration systems. It is shown that the fabricated emitter can reproduce digitally recorded ultrasonic mouse-pups vocalizations very accurately in terms of the call duration, frequency dispersion, and sound pressure level. The thermoacoustic nc-Si device provides a powerful physical means for the understanding of ultrasonic communication mechanisms in various living animals.

Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

Science.gov (United States)

Bockelmann, Thomas R [Battle Creek, MI; Hope, Mark E [Marshall, MI; Zou, Zhanjiang [Battle Creek, MI; Kang, Xiaosong [Battle Creek, MI

2009-02-10

A battery control system for hybrid vehicle includes a hybrid powertrain battery, a vehicle accessory battery, and a prime mover driven generator adapted to charge the vehicle accessory battery. A detecting arrangement is configured to monitor the vehicle accessory battery's state of charge. A controller is configured to activate the prime mover to drive the generator and recharge the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a first predetermined level, or transfer electrical power from the hybrid powertrain battery to the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a second predetermined level. The invention further includes a method for controlling a hybrid vehicle powertrain system.

A thermoacoustic engine capable of utilizing multi-temperature heat sources

International Nuclear Information System (INIS)

Qiu Limin; Wang Bo; Sun Daming; Liu Yu; Steiner, Ted

2009-01-01

Low-grade energy is widespread. However, it cannot be utilized with high thermal efficiency directly. Following the principle of thermal energy cascade utilization, a thermoacoustic engine (TE) with a new regenerator that can be driven by multiple heat sources at different temperature levels is proposed. Taking a regenerator that utilizes heat sources at two temperatures as an example, theoretical research has been conducted on a traveling-wave TE with the new regenerator to predict its performance. Experimental verification is also done to demonstrate the benefits of the new regenerator. Results indicate that a TE with the new regenerator utilizing additional heat at a lower temperature experiences an increase in pressure ratio, acoustic power, efficiency, and exergy efficiency with proper heat input at an appropriate temperature at the mid-heater. A regenerator that uses multi-temperature heat sources can provide a means of recovering lower grade heat.

LIGHT-WEIGHT, NON-CONTACT MAGNETIC TRANSMISSION FOR UAV AND ROTORCRAFT APPLICATIONS, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Speed reducing units consisting of mechanical gears are widely used in applications to match high speed prime movers to low speed loads. All aerospace applications...

Priming semantico e museografia / Semantic priming and museography

Directory of Open Access Journals (Sweden)

Annalisa Banzi

2012-05-01

Full Text Available Il priming è una tipologia di memoria implicita che facilita l’apprendimento di stimoli di diversa natura (stimoli visivi, semantici, etc.. Un allestimento museale che adotti strumenti basati sul priming potrebbe aiutare il pubblico a selezionare i contenuti relativi agli oggetti esposti. In questo articolo viene descritta l’applicazione del priming semantico allo spazio museale. Questa operazione in prima battutta potrebbe essere letta come una mancanza di fiducia nelle capacità cognitive del visitatore nel discriminare il significato delle informazioni. In realtà è una forma di sostegno per aiutare il visitatore a sviluppare gradualmente una propria metodologia di approccio ai contenuti proposti nel museo. Grazie al priming, il pubblico riceve una serie di stimoli che possono aiutare a costituire la base delle proprie conoscenze in ambito storico-artistico ed essere il punto di partenza sul quale costruire un metodo critico.   Many psychological aspects such as motivation, emotion, and attention, affect human learning. Among these, priming triggers and tunes implicit memory processes. Hence the goal of this paper is to check whether semantic priming can be used as an effective tool to design a supportive museum environment where people can easily learn. Moreover, the resulting stronger and more persistent memories could encourage museum visitors to learn more and better, and to develop a method to “read” the artworks. After a brief overview of current models of semantic priming, practical and theoretical issues are considered and discussed.

Thermo-acoustic instabilities in lean premixed swirl-stabilized combustion and their link to acoustically coupled and decoupled flame macrostructures

KAUST Repository

Taamallah, Soufien

2015-01-01

© 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved. We investigate the onset of thermo-acoustic instabilities and their link to the mean flame configurations - or macrostructures - under acoustically coupled and decoupled conditions. Methane-hydrogen mixtures are used to explore the role of the fuel in changing the flame macrostructure, as determined by chemilumi-nescence, as the equivalence ratio (φ) varies. We observe four different configurations: a columnar flame (I); a bubble-columnar flame (II); a single conical flame (III); and a double conical flame (IV). We also observe different thermo-acoustic modes in the lean regime investigated, φ ∈ [0.5-0.75], that correspond to different flame configurations. By changing the combustor length without affecting the underlying flow, the resonant modes of the combustor are shifted to higher frequencies allowing for the decoupling of heat release fluctuations and the acoustic field over a range of equivalence ratio. We find that the same flame macrostructures observed in the long, acoustically coupled combustor arise in the short, acoustically decoupled combustor and transition at similar equivalence ratios in both combustors. The onset of the first fully unstable mode in the long combustor occurs at similar equivalence ratio as the flame transition from configuration III to IV. In the acoustically decoupled case, this transition occurs gradually starting with the intermittent appearance of a flame in the outer recirculation zone (ORZ). Spectral analysis of this phenomenon, referred to as "ORZ flame flickering" shows the existence of an unsteady event occurring over a narrow frequency band centered around 28 Hz along with a weaker broadband region at lower frequency in the range [1-10] Hz. The tone at 28 Hz is shown to be associated with the azimuthal advection of the flame by the outer recirculation zone flow. Changes in the fuel composition, by adding hydrogen (up to 20%), do not

Thermoacoustic CT of the breast: pilot study observations

Science.gov (United States)

Kruger, Robert A.; Kiser, William L., Jr.; Romilly, A. P.; Scmidt, Phyllis

2001-06-01

In order to assess the potential clinical utility of using thermoacoustic computer tomography (TCT) to image the breast, we conducted a retrospective pilot study of 78 patients. We recruited patients in three age groups (50 years). The study population was further segregated into normal and suspicious based on the results of the previous x-ray mammography and ultrasound. Image quality was evaluated qualitatively by consensus of two trained mammographers using a 4-point scale. The appearance of normal anatomy, cysts, benign disease and cancer was noted. Patients were also asked to rate the comfort of the TCT exam and to indicate a personal preference for x-ray mammography or TCT. Analysis of the data indicated that TCT image quality was dependent upon both patient age and breast density, improving with both increasing breast density and decreasing patient age. Fibrocystic disease was well seen, cysts appearing as areas of low RF absorption. Fibroadenomas did not demonstrate contrast enhancement with the exception of one patient with associated atypical hyperplasia. Cancer displayed higher RF absorption than surrounding tissues in 4/7 patients in whom cancer was confirmed, including one patient with a 7-mm ductal carcinoma in situ (DCIS).

Smelly primes – when olfactory primes do or do not work

Directory of Open Access Journals (Sweden)

Monique A Smeets

2014-02-01

Full Text Available In applied olfactory cognition the effects that olfactory stimulation can have on (human behavior are investigated. To enable an efficient application of olfactory stimuli a model of how they may lead to a change in behavior is proposed. To this end we use the concept of olfactory priming. Olfactory priming may prompt a special view on priming as the olfactory sense has some unique properties which make odors special types of primes. Examples of such properties are the ability of odors to influence our behavior outside of awareness, to lead to strong affective evaluations, to evoke specific memories, and to associate easily and quickly to other environmental stimuli. Opportunities and limitations for using odors as primes are related to these properties, and alternative explanations for reported findings are offered. Implications for olfactory semantic, construal, behavior and goal priming are given based on a brief overview of the priming literature from social psychology and from olfactory perception science. We end by formulating recommendations and ideas for a future research agenda and applications for olfactory priming.

Broadband Spectroscopic Thermoacoustic Characterization of Single-Walled Carbon Nanotubes

Directory of Open Access Journals (Sweden)

Daniel R. Bauer

2015-01-01

Full Text Available Carbon nanotubes have attracted interest as contrast agents for biomedical imaging because they strongly absorb electromagnetic radiation in the optical and microwave regions. This study applies thermoacoustic (TA imaging and spectroscopy to measure the frequency-dependent absorption profile of single-walled carbon nanotubes (SWNT in the ranges of 2.7–3.1 GHz and 7–9 GHz using two tunable microwave sources. Between 7 and 9 GHz, the peak TA signal for solutions containing semiconducting and metallic SWNTs increased monotonically with a slope of 1.75 AU/GHz (R2=0.95 and 2.8 AU/GHz (R2=0.93, respectively, relative to a water baseline. However, after compensating for the background signal from water, it was revealed that the TA signal from metallic SWNTs increased exponentially within this frequency band. Results suggest that TA imaging and spectroscopy could be a powerful tool for quantifying the absorption properties of SWNTs and optimizing their performance as contrast agents for imaging or heat sources for thermal therapy.

Vortical flow structure of thermoacoustic oscillations in a closed tube

International Nuclear Information System (INIS)

Ishii, Katsuya; Kitagawa, Shyun; Ishigaki, Masahiro; Adachi, Shizuko

2014-01-01

Spontaneous thermoacoustic oscillations of a gas in a closed cylindrical tube are studied. Numerical simulations of the flow field in the tube on which a temperature gradient along the axis is imposed are performed by solving the axisymmetric compressible Navier–Stokes equations. The wall temperature of the hot part near both ends (300 K) and that of the cold part near the center (20 K) are fixed. The computations are done for various values of the length ratio ξ of the hot part to the cold part between 0.3 and 1.0, and steady oscillatory states are obtained. These states are divided into three groups according to the magnitude of the pressure amplitude. The state in each group has distinguished features of the flow field. We analyze the effect of vortices on the structure of the temperature distribution. The difference of the boundary layer thickness between the hot part and the cold part is shown to play an important role. (paper)

Vortical flow structure of thermoacoustic oscillations in a closed tube

Energy Technology Data Exchange (ETDEWEB)

Ishii, Katsuya [Information Technology Center, Nagoya University, Furou-chou, Chikusa-ku, Nagoya, Aichi 464-8601 (Japan); Kitagawa, Shyun [Department of Computational Science and Engineering, Graduate School of Engineering, Nagoya University, Furou-chou, Chikusa-ku, Nagoya, Aichi 464-8603 (Japan); Ishigaki, Masahiro [Japan Atomic Energy Agency, 2–4 Shirakata-shirane, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Adachi, Shizuko, E-mail: ishii@cc.nagoya-u.ac.jp [School of Business and Commerce, Tokyo International University, Matoba-kita, Kawagoe-shi, Saitama 350-1197 (Japan)

2014-12-01

Spontaneous thermoacoustic oscillations of a gas in a closed cylindrical tube are studied. Numerical simulations of the flow field in the tube on which a temperature gradient along the axis is imposed are performed by solving the axisymmetric compressible Navier–Stokes equations. The wall temperature of the hot part near both ends (300 K) and that of the cold part near the center (20 K) are fixed. The computations are done for various values of the length ratio ξ of the hot part to the cold part between 0.3 and 1.0, and steady oscillatory states are obtained. These states are divided into three groups according to the magnitude of the pressure amplitude. The state in each group has distinguished features of the flow field. We analyze the effect of vortices on the structure of the temperature distribution. The difference of the boundary layer thickness between the hot part and the cold part is shown to play an important role. (paper)

Review of tri-generation technologies: Design evaluation, optimization, decision-making, and selection approach

International Nuclear Information System (INIS)

Al Moussawi, Houssein; Fardoun, Farouk; Louahlia-Gualous, Hasna

2016-01-01

Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification

TU-FG-BRB-09: Thermoacoustic Range Verification with Perfect Co-Registered Overlay of Bragg Peak onto Ultrasound Image

Energy Technology Data Exchange (ETDEWEB)

Patch, S; Kireeff Covo, M; Jackson, A; Qadadha, Y; Campbell, K; Albright, R; Bloemhard, P; Donoghue, A; Siero, C; Gimpel, T; Small, S; Ninemire, B; Johnson, M; Phair, L [Lawrence Berkeley National Lab, Berkeley, CA (United States)

2016-06-15

Purpose: The potential of particle therapy has not yet been fully realized due to inaccuracies in range verification. The purpose of this work was to correlate the Bragg peak location with target structure, by overlaying thermoacoustic localization of the Bragg peak onto an ultrasound image. Methods: Pulsed delivery of 50 MeV protons was accomplished by a fast chopper installed between the ion source and the inflector of the 88″ cyclotron at Lawrence Berkeley National Lab. 2 Gy were delivered in 2 µs by a beam with peak current of 2 µA. Thermoacoustic emissions were detected by a cardiac array and Verasonics V1 ultrasound system, which also generated a grayscale ultrasound image. 1024 thermoacoustic pulses were averaged before filtering and one-way beamforming focused signal onto the Bragg peak location with perfect co-registration to the ultrasound images. Data was collected in a room temperature water bath and gelatin phantom with a cavity designed to mimic the intestine, in which gas pockets can displace the Bragg peak. Experiments were performed with the cavity both empty and filled with olive oil. Results: In the waterbath overlays of the Bragg peak agreed with Monte Carlo simulations to within 800±170 µm. Agreement within 1.3 ± 0.2 mm was achieved in the gelatin phantom, although relative stopping powers were estimated only to first order from CT scans. Protoacoustic signals were detected after travel from the Bragg peak through 29 mm and 65 mm of phantom material when the cavity was empty and full of olive oil, respectively. Conclusion: Protoacoustic range verification is feasible with a commercial clinical ultrasound array, but at doses exceeding the clinical realm. Further optimization of both transducer array and injection line chopper is required to enable range verification within a 2 Gy dose limit, which would enable online adaptive treatment. This work was supported in part by a UWM Intramural Instrumentation Grant and by the Director, Office

Beam-based alignment of CLIC drive beam decelerator using girders movers

CERN Document Server

Sterbini, G

2011-01-01

The CLIC drive beams will provide the rf power to accelerate the colliding beams: in order to reach the design performance, an efficient transport of the drive beam has to be ensured in spite of its challenging energy spread and large current intensity. As shown in previous studies, the specifications can be met by coupling a convenient optics design with the state-of-the-art of pre-alignment and beambased alignment techniques. In this paper we consider a novel beam-based alignment scheme that does not require quadrupole movers or dipole correctors but uses the motors already foreseen for the pre-alignment system. This implies potential savings in terms of complexity and cost at the expense of the alignment flexibility: the performance, limitations and sensitivity to pre-alignment tolerances of this method are discussed.

Stacking faults of {gamma}{prime}{prime} phase precipitated in a Ni-15Cr-8Fe-6Nb alloy; Ni-15Cr-8Fe-6Nb gokin ni sekishutsusuru {gamma}{prime}{prime} sonai no sekiso kekkan

Energy Technology Data Exchange (ETDEWEB)

Kusabiraki, K; Ikeuchi, S [Toyama University, Toyama (Japan). Faculty of Engineering

1995-09-01

The stacking faults of a metastable {gamma}{prime}{prime} phase precipitated in a nickel-base superalloy, a modified NCF 3 type alloy (X-750M) were investigated by transmission electron microscopy and X-ray diffraction method. The {gamma}{prime}{prime} precipitates are circular shaped plates at the early stage of aging and they become elliptic or irregular shaped plates at the latter stage of aging up to 1033K. Contrast which suggests the existence of stacking faults on {l_brace}112{r_brace}{sub {gamma}{prime}{prime}} planes can be seen in many of large {gamma}{prime}{prime} precipitates extracted from the specimens aged at 1033K. It is clear that the values of {gamma}{prime}{prime}/{gamma} lattice mismatch increase with increasing the aging time from the measurement of lattice constants of the {gamma} and the {gamma}{prime}{prime} phase. The formation of stacking faults on {l_brace}112{r_brace}{sub {gamma}{prime}{prime}} in the large {gamma}{prime}{prime} precipitates is due to the movement of an a/6 [111] partial dislocation introduced by {gamma}{prime}{prime} /{gamma} coherency strain. Since a part of stacking sequence has a similar crystal structure to that of a stable {delta} phase precipitates in {gamma} phase, the formation of stacking faults in the {gamma}{prime}{prime} precipitates is considered to be favorable for the stabilization of them. 14 refs., 10 figs., 1 tab.

Identification of flame transfer functions in the presence of intrinsic thermoacoustic feedback and noise

Science.gov (United States)

Jaensch, Stefan; Merk, Malte; Emmert, Thomas; Polifke, Wolfgang

2018-05-01

The Large Eddy Simulation/System Identification (LES/SI) approach is a general and efficient numerical method for deducing a Flame Transfer Function (FTF) from the LES of turbulent reacting flow. The method may be summarised as follows: a simulated flame is forced with a broadband excitation signal. The resulting fluctuations of the reference velocity and of the global heat release rate are post-processed via SI techniques in order to estimate a low-order model of the flame dynamics. The FTF is readily deduced from the low-order model. The SI method most frequently applied in aero- and thermo-acoustics has been Wiener-Hopf Inversion (WHI). This method is known to yield biased estimates in situations with feedback, thus it was assumed that non-reflective boundary conditions are required to generate accurate results with the LES/SI approach. Recent research has shown that the FTF is part of the so-called Intrinsic ThermoAcoustic (ITA) feedback loop. Hence, identifying an FTF from a compressible LES is always a closed-loop problem, and consequently one should expect that the WHI would yield biased results. However, several studies proved that WHI results compare favourably with validation data. To resolve this apparent contradiction, a variety of identification methods are compared against each other, including models designed for closed-loop identification. In agreement with theory, we show that the estimate given by WHI does not converge to the actual FTF. Fortunately, the error made is small if excitation amplitudes can be set such that the signal-to-noise ratio is large, but not large enough to trigger nonlinear flame dynamics. Furthermore, we conclude that non-reflective boundary conditions are not essentially necessary to apply the LES/SI approach.

46 CFR 177.202 - Plans and information required.

Science.gov (United States)

2010-10-01

... materials; (iv) Type and size of generators and prime movers; (v) Type and size of generator cables, bus-tie... 7102, Washington, DC 20593-7102. Three copies of all documents are required to be submitted for Marine...

Analysis of Thermo-Acoustic Emission from Damage in Composite Laminates under Thermal Cyclic Loading

International Nuclear Information System (INIS)

Kim, Young Bok; Min, Dae Hong; Lee, Deok Bo; Choi, Nak Sam

2001-01-01

An investigation on nondestructive evaluation of thermal stress-reduced damage in the composite laminates (3mm in thickness and [+45 6 /-45 6 ] S lay-up angles) has been performed using the thermo-acoustic emission technique. Reduction of thermo-AE events due to repetitive thermal load cycles showed a Kaiser effect. An analysis of the thermo-AE behavior determined the stress free temperature of composite laminates. Fiber fracture and matrix cracks were observed using the optical microscopy, scanning electron microscopy and ultrasonic C-sean. Short-Time Fourier Transform of thermo-AE signals offered the time-frequency characteristics which might classify the thermo-AE as three different types to estimate the damage processes of the composites

Prime tight frames

DEFF Research Database (Denmark)

Lemvig, Jakob; Miller, Christopher; Okoudjou, Kasso A.

2014-01-01

to suggest effective analysis and synthesis computation strategies for such frames. Finally, we describe all prime frames constructed from the spectral tetris method, and, as a byproduct, we obtain a characterization of when the spectral tetris construction works for redundancies below two.......We introduce a class of finite tight frames called prime tight frames and prove some of their elementary properties. In particular, we show that any finite tight frame can be written as a union of prime tight frames. We then characterize all prime harmonic tight frames and use thischaracterization...

Experimental and Numerical Investigation of Thermoacoustic Sources Related to High-Frequency Instabilities

Directory of Open Access Journals (Sweden)

Mathieu Zellhuber

2014-03-01

Full Text Available Flame dynamics related to high-frequency instabilities in gas turbine combustors are investigated using experimental observations and numerical simulations. Two different combustor types are studied, a premix swirl combustor (experiment and a generic reheat combustor (simulation. In both cases, a very similar dynamic behaviour of the reaction zone is observed, with the appearance of transverse displacement and coherent flame wrinkling. From these observations, a model for the thermoacoustic feedback linked to transverse modes is proposed. The model splits heat release rate fluctuations into distinct contributions that are related to flame displacement and variations of the mass burning rate. The decomposition procedure is applied on the numerical data and successfully verified by comparing a reconstructed Rayleigh index with the directly computed value. It thus allows to quantify the relative importance of various feedback mechanisms for a given setup.

System Identification and Resonant Control of Thermoacoustic Engines for Robust Solar Power

Directory of Open Access Journals (Sweden)

Boe-Shong Hong

2015-05-01

Full Text Available It was found that thermoacoustic solar-power generators with resonant control are more powerful than passive ones. To continue the work, this paper focuses on the synthesis of robustly resonant controllers that guarantee single-mode resonance not only in steady states, but also in transient states when modelling uncertainties happen and working temperature temporally varies. Here the control synthesis is based on the loop shifting and the frequency-domain identification in advance thereof. Frequency-domain identification is performed to modify the mathematical modelling and to identify the most powerful mode, so that the DSP-based feedback controller can online pitch the engine to the most powerful resonant-frequency robustly and accurately. Moreover, this paper develops two control tools, the higher-order van-der-Pol oscillator and the principle of Dynamical Equilibrium, to assist in system identification and feedback synthesis, respectively.

Non-cognate translation priming in masked priming lexical decision experiments: A meta-analysis.

Science.gov (United States)

Wen, Yun; van Heuven, Walter J B

2017-06-01

The masked translation priming paradigm has been widely used in the last 25 years to investigate word processing in bilinguals. Motivated by studies reporting mixed findings, in particular for second language (L2) to first language (L1) translation priming, we conducted, for the first time in the literature, a meta-analysis of 64 masked priming lexical decision experiments across 24 studies to assess the effect sizes of L1-L2 and L2-L1 non-cognate translation priming effects in bilinguals. Our meta-analysis also investigated the influence of potential moderators of translation priming effects. The results provided clear evidence of significant translation priming effects for both directions, with L1-L2 translation priming significantly larger than L2-L1 translation priming (i.e., effect size of 0.86 vs. 0.31). The analyses also revealed that L1-L2 translation effect sizes were moderated by the interval between prime and target (ISI), whereas L2-L1 translation effect sizes were modulated by the number of items per cell. Theoretical and methodological implications of this meta-analysis are discussed and recommendations for future studies are provided.

Fast Algorithms for Earth Mover’s Distance Based on Optimal Transport and L1 Type Regularization I

Science.gov (United States)

2016-09-01

problem. Numerische Mathematik 84(3): 375–393, 2000. [4] Antonin Chambolle and Thomas Pock. A first-order primal-dual algorithm for convex problems with...Conference on Computer Vision, 460–467, 2009. [13] Thomas Pock and Antonin Chambolle. Diagonal preconditioning for first order primal-dual algorithms in convex... Calculus of Variations and Partial Differential Equations, 36 (3): 343–354, 2009, [18] Sameer Shirdhonkar and David Jacobs. Approximate earth movers

Experimental investigation on preconditioned rate induced tipping in a thermoacoustic system.

Science.gov (United States)

Tony, J; Subarna, S; Syamkumar, K S; Sudha, G; Akshay, S; Gopalakrishnan, E A; Surovyatkina, E; Sujith, R I

2017-07-14

Many systems found in nature are susceptible to tipping, where they can shift from one stable dynamical state to another. This shift in dynamics can be unfavorable in systems found in various fields ranging from ecology to finance. Hence, it is important to identify the factors that can lead to tipping in a physical system. Tipping can mainly be brought about by a change in parameter or due to the influence of external fluctuations. Further, the rate at which the parameter is varied also determines the final state that the system attains. Here, we show preconditioned rate induced tipping in experiments and in a theoretical model of a thermoacoustic system. We provide a specific initial condition (preconditioning) and vary the parameter at a rate higher than a critical rate to observe tipping. We find that the critical rate is a function of the initial condition. Our study is highly relevant because the parameters that dictate the asymptotic behavior of many physical systems are temporally dynamic.

Load frequency control of three area interconnected hydro-thermal ...

African Journals Online (AJOL)

user

hydrothermal reheat power system by the use of Artificial Intelligent and PI Controller. ... form of Kinetic Energy stored in generator prime mover set, which results the ... A control strategy is needed that not only maintains constancy of frequency ...

Priming in concert: Assimilation and contrast with multiple affective and gender primes.

NARCIS (Netherlands)

Fockenberg, D.A.; Koole, S.L.; Semin, G.R.

2008-01-01

The present research investigated the influence of multiple sequential primes on social categorization processes. Study 1 examined an evaluative decision task in which targets were preceded and succeeded by two primes. As expected, the temporally closest forward primes had assimilative effects on

The elimination of positive priming with increasing prime duration reflects a transition from perceptual fluency to disfluency rather than bias against primed words.

Science.gov (United States)

Potter, Kevin W; Donkin, Chris; Huber, David E

2018-03-01

With immediate repetition priming of forced choice perceptual identification, short prime durations produce positive priming (i.e., priming the target leads to higher accuracy, while priming the foil leads to lower accuracy). Many theories explain positive priming following short duration primes as reflecting increased perceptual fluency for the primed target (i.e., decreased identification latency). However, most studies only examine either accuracy or response times, rather than considering the joint constraints of response times and accuracy to properly address the role of decision biases and response caution. This is a critical oversight because several theories propose that the transition to negative priming following a long duration prime reflects a decision strategy to compensate for the effect of increased perceptual fluency. In contrast, the nROUSE model of Huber and O'Reilly (2003) explains this transition as reflecting perceptual habituation, and thus a change to perceptual disfluency. We confirmed this prediction by applying a sequential sampling model (the diffusion race model) to accuracy and response time distributions from a new single item same-different version of the priming task. In this way, we measured strategic biases and perceptual fluency in each condition for each subject. The nROUSE model was only applied to accuracy from the original forced-choice version of the priming task. This application of nROUSE produced separate predictions for each subject regarding the degree of fluency and disfluency in each condition, and these predictions were confirmed by the drift rate parameters (i.e., fluency) from the response time model in contrast to the threshold parameters (i.e., bias). Copyright © 2017 Elsevier Inc. All rights reserved.

Experimental investigation on the optimal performance of Zeolite-water adsorption chiller

KAUST Repository

Myat, Aung; Ng, K. C.; Thu, Kyaw; Kim, Youngdeuk

2013-01-01

This paper presents the performance testing of Zeolite adsorption cooling system driven by low grade waste heat source extracted from prime mover's exhaust, power plant's exhaust and the solar energy. The adsorbent FAM Z01 is used as an adsorbent

Steam power plant

International Nuclear Information System (INIS)

Campbell, J.W.E.

1981-01-01

This invention relates to power plant forced flow boilers operating with water letdown. The letdown water is arranged to deliver heat to partly expanded steam passing through a steam reheater connected between two stages of the prime mover. (U.K.)

On the Control of Single-Prime Negative Priming: The Effects of Practice and Time Course

Science.gov (United States)

Chao, Hsuan-Fu

2009-01-01

Single-prime negative priming refers to the phenomenon wherein repetition of a prime as the probe target results in delayed response. Sometimes this effect has been found to be contingent on participants' unawareness of the primes, and sometimes it has not. Further, sometimes this effect has been found to be eliminated when the prime could predict…

Subliminal semantic priming in speech.

Directory of Open Access Journals (Sweden)

Jérôme Daltrozzo

Full Text Available Numerous studies have reported subliminal repetition and semantic priming in the visual modality. We transferred this paradigm to the auditory modality. Prime awareness was manipulated by a reduction of sound intensity level. Uncategorized prime words (according to a post-test were followed by semantically related, unrelated, or repeated target words (presented without intensity reduction and participants performed a lexical decision task (LDT. Participants with slower reaction times in the LDT showed semantic priming (faster reaction times for semantically related compared to unrelated targets and negative repetition priming (slower reaction times for repeated compared to semantically related targets. This is the first report of semantic priming in the auditory modality without conscious categorization of the prime.

Primes, Geometry and Condensed Matter

Directory of Open Access Journals (Sweden)

Al Rabeh R. H.

2009-07-01

Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some "the elementary particles of arithmetic" as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called "the elementary particles of physics" too. This study considers the problem of closely packing similar circles/spheres in 2D/3D space. This is in effect a discretization process of space and the allowable number in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This "number/physical" stability idea applies to bigger collections made from smaller (prime units leading to larger stable prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show convincingly that the growth of prime numbers and that of the masses of

Cognate status and cross-script translation priming.

Science.gov (United States)

Voga, Madeleine; Grainger, Jonathan

2007-07-01

Greek-French bilinguals were tested in three masked priming experiments with Greek primes and French targets. Related primes were the translation equivalents of target words, morphologically related to targets, or phonologically related to targets. In Experiment 1, cognate translation equivalents (phonologically similar translations) showed facilitatory priming, relative to matched phonologically related primes, in conditions in which morphologically related primes showed no effect (50-msec prime exposure). Cross-language morphological priming emerged at longer prime exposure durations (66 msec), but cognate primes continued to generate more priming than did those in the morphological condition. In Experiments 2 and 3, the level of phonological overlap across translation equivalents was varied, and priming effects were measured against those for matched phonologically related primes and those in an unrelated prime condition. When measured against the unrelated baseline, cognate primes showed the typical advantage over noncognate primes. However, this cognate advantage disappeared when priming was measured against the phonologically related prime condition. The results are discussed in terms of how translation equivalents are represented in bilingual memory.

False memories and lexical decision: even twelve primes do not cause long-term semantic priming.

Science.gov (United States)

Zeelenberg, René; Pecher, Diane

2002-03-01

Semantic priming effects are usually obtained only if the prime is presented shortly before the target stimulus. Recent evidence obtained with the so-called false memory paradigm suggests, however, that in both explicit and implicit memory tasks semantic relations between words can result in long-lasting effects when multiple 'primes' are presented. The aim of the present study was to investigate whether these effects would generalize to lexical decision. In four experiments we showed that even as many as 12 primes do not cause long-term semantic priming. In all experiments, however, a repetition priming effect was obtained. The present results are consistent with a number of other results showing that semantic information plays a minimal role in long-term priming in visual word recognition.

Arrangement for adapting a wind wheel to an electric power generator

Energy Technology Data Exchange (ETDEWEB)

Beusse, H

1977-08-11

The invention is concerned with a device for adapting a wind wheel to an electric power generator in such a way that the wind wheel will always be operated with a maximum performance coefficient, that another source of energy, e.g. a prime mover, can supply the power deficit if the wind power is not sufficient, and that the generator at the output of the facility is kept mains-synchronous of constant speed and constant voltage. According to the invention, the shaft power of the wind power engine is transmitted to a first generator driving an electromotor. The motor is coupled to a second generator feeding into a consumer grid. By means of an anemometer the excitation output of the motor is controled in such manner that the speed of the generator is practically constant-provided a sufficient supply of wind is available. On the shaft of the output generator a prinse mover, e.g. a Diesel engine, is mounted being controllable for contant speed by means of a controll device in such a way that the prime mover takes over the missing amount of power if the wind supply falls short of the power taken off at the generator output.

Primes, Geometry and Condensed Matter

Directory of Open Access Journals (Sweden)

Al Rabeh R. H.

2009-07-01

Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some “the elementary particles of arithmetic” as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called “the elementary particles of physics” too. This study considers the problem of closely packing similar circles / spheres in 2D / 3D space. This is in effect a discretization process of space and the allowable num- ber in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This “number / physical” stability idea applies to bigger collections made from smaller (prime units leading to larger sta- ble prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show con- vincingly that the growth of prime numbers and that

Iterative reconstruction methods for Thermo-acoustic Tomography

International Nuclear Information System (INIS)

Marinesque, Sebastien

2012-01-01

We define, study and implement various iterative reconstruction methods for Thermo-acoustic Tomography (TAT): the Back and Forth Nudging (BFN), easy to implement and to use, a variational technique (VT) and the Back and Forth SEEK (BF-SEEK), more sophisticated, and a coupling method between Kalman filter (KF) and Time Reversal (TR). A unified formulation is explained for the sequential techniques aforementioned that defines a new class of inverse problem methods: the Back and Forth Filters (BFF). In addition to existence and uniqueness (particularly for backward solutions), we study many frameworks that ensure and characterize the convergence of the algorithms. Thus we give a general theoretical framework for which the BFN is a well-posed problem. Then, in application to TAT, existence and uniqueness of its solutions and geometrical convergence of the algorithm are proved, and an explicit convergence rate and a description of its numerical behaviour are given. Next, theoretical and numerical studies of more general and realistic framework are led, namely different objects, speeds (with or without trapping), various sensor configurations and samplings, attenuated equations or external sources. Then optimal control and best estimate tools are used to characterize the BFN convergence and converging feedbacks for BFF, under observability assumptions. Finally, we compare the most flexible and efficient current techniques (TR and an iterative variant) with our various BFF and the VT in several experiments. Thus, robust, with different possible complexities and flexible, the methods that we propose are very interesting reconstruction techniques, particularly in TAT and when observations are degraded. (author) [fr

Smart limbed vehicles for naval applications. Part II. Relevant technologies and performance evaluation. Interim report on research work on smart vehicle concepts for military use on the ocean surface

Energy Technology Data Exchange (ETDEWEB)

Weisberg, A.; Wood, L.

1976-09-30

Research work in smart, unmanned water-traversing limbed vehicles for naval warfare applications is reported. The areas covered include prime movers, power transformers and actuators, structural considerations, physical control, joint servo-control, motion control, visual data and the ocean surface, smartness, and vehicle characterization. (TFD)

Leadership behaviour and practical implications for sustainable ...

African Journals Online (AJOL)

Government at various levels was the prime mover and animator of most agricultural rural development projects in Nigeria, as they played management roles, and in the process, encouraged mass involvement and participation, especially by beneficiary communities. This paper reviews leadership behaviour as a crucial ...

Sequential Stereotype Priming: A Meta-Analysis.

Science.gov (United States)

Kidder, Ciara K; White, Katherine R; Hinojos, Michelle R; Sandoval, Mayra; Crites, Stephen L

2017-08-01

Psychological interest in stereotype measurement has spanned nearly a century, with researchers adopting implicit measures in the 1980s to complement explicit measures. One of the most frequently used implicit measures of stereotypes is the sequential priming paradigm. The current meta-analysis examines stereotype priming, focusing specifically on this paradigm. To contribute to ongoing discussions regarding methodological rigor in social psychology, one primary goal was to identify methodological moderators of the stereotype priming effect-whether priming is due to a relation between the prime and target stimuli, the prime and target response, participant task, stereotype dimension, stimulus onset asynchrony (SOA), and stimuli type. Data from 39 studies yielded 87 individual effect sizes from 5,497 participants. Analyses revealed that stereotype priming is significantly moderated by the presence of prime-response relations, participant task, stereotype dimension, target stimulus type, SOA, and prime repetition. These results carry both practical and theoretical implications for future research on stereotype priming.

Unconscious Congruency Priming from Unpracticed Words Is Modulated by Prime-Target Semantic Relatedness

Science.gov (United States)

Ortells, Juan J.; Mari-Beffa, Paloma; Plaza-Ayllon, Vanesa

2013-01-01

Participants performed a 2-choice categorization task on visible word targets that were preceded by novel (unpracticed) prime words. The prime words were presented for 33 ms and followed either immediately (Experiments 1-3) or after a variable delay (Experiments 1 and 4) by a pattern mask. Both subjective and objective measures of prime visibility…

Leading, but not trailing, primes influence temporal order perception: further evidence for an attentional account of perceptual latency priming.

Science.gov (United States)

Scharlau, Ingrid

2002-11-01

Presenting a masked prime leading a target influences the perceived onset of the masking target (perceptual latency priming; Scharlau & Neumann, in press). This priming effect is explained by the asynchronous updating model (Neumann, 1982; Scharlau & Neumann, in press): The prime initiates attentional allocation toward its location, which renders a trailing target at the same place consciously available earlier. In three experiments, this perceptual latency priming by leading primes was examined jointly with the effects of trailing primes in order to compare the explanation of the asynchronous updating model with the onset-averaging and the P-center hypotheses. Experiment 1 showed that an attended, as well as an unattended, prime leads to perceptual latency priming. In addition, a large effect of trailing primes on the onset of a target was found. As Experiment 2 demonstrated, this effect is quite robust, although smaller than that of a leading prime. In Experiment 3, masked primes were used. Under these conditions, no influence of trailing primes could be found, whereas perceptual latency priming persisted. Thus, a nonattentional explanation for the effect of trailing primes seems likely.

Mechanisms of subliminal response priming.

Science.gov (United States)

Kiesel, Andrea; Kunde, Wilfried; Hoffmann, Joachim

2008-07-15

Subliminal response priming has been considered to operate on several stages, e.g. perceptual, central or motor stages might be affected. While primes' impact on target perception has been clearly demonstrated, semantic response priming recently has been thrown into doubt (e.g. Klinger, Burton, & Pitts, 2000). Finally, LRP studies have revealed that subliminal primes evoke motor processes. Yet, the premises for such prime-evoked motor activation are not settled. A transfer of priming to stimuli that have never been presented as targets appears particularly interesting because it suggests a level of processing that goes beyond a reactivation of previously acquired S-R links. Yet, such transfer has not always withstood empirical testing. To account for these contradictory results, we proposed a two-process model (Kunde, Kiesel, & Hoffmann, 2003): First, participants build up expectations regarding imperative stimuli for the required responses according to experience and/or instructions. Second, stimuli that match these "action triggers" directly activate the corresponding motor responses irrespective of their conscious identification. In line with these assumptions, recent studies revealed that non-target primes induce priming when they fit the current task intentions and when they are expected in the experimental setting.

Optimization of a gas turbine cogeneration plant

International Nuclear Information System (INIS)

Wallin, J.; Wessman, M.

1991-11-01

This work describes an analytical method of optimizing a cogeneration with a gas turbine as prime mover. The method is based on an analytical function. The function describes the total costs of the heat production, described by the heat load duration curve. The total costs consist of the prime costs and fixed costs of the gas turbine and the other heating plants. The parameters of interest at optimization are the heat efficiency produced by the gas turbine and the utilization time of the gas turbine. With todays prices for electricity, fuel and heating as well as maintenance- personnel and investment costs, extremely good conditions are needed to make the gas turbine profitable. Either a raise of the price for the electricity with about 33% is needed or that the ratio of electricity and fuel increases to approx 2.5. High investment subsidies for the gas turbines could make a gas turbine profitable, even with todays electricity- and fuel prices. Besides being a good help when projecting cogeneration plants with a gas turbine as prime mover, the method gives a possibility to optimize the annual operating time for a certain gas turbine when changing the operating conditions. 6 refs

A novel string field theory solving string theory by liberating left and right movers

International Nuclear Information System (INIS)

Nielsen, Holger B.; Ninomiya, Masao

2014-01-01

We put forward ideas to a novel string field theory based on making some “objects” that essentially describe “liberated” left- and right- mover fields X L μ (τ+σ) and X R μ (τ−σ) on the string. Our novel string field theory is completely definitely different from any other string theory in as far as a “null set” of information in the string field theory Fock space has been removed relatively, to the usual string field theories. So our theory is definitely new. The main progress is that we manage to make our novel string field theory provide the correct mass square spectrum for the string. We finally suggest how to obtain the Veneziano amplitude in our model

Thermoacoustic imaging of prostate cancer: comparison to histology

Science.gov (United States)

Patch, S. K.; Griep, S. K.; Jacobsohn, K.; See, W. A.; Hull, D.

2014-03-01

Ex vivo imaging of fresh prostate specimens was performed to test the hypothesis that the thermoacoustic (TA) contrast mechanism generated with very high frequency electromagnetic (EM) irradiation is sensitive to prostate cancer. Ex vivo imaging was performed immediately after radical prostatectomy, performed as part of normal care. Irradiation pulsewidth was 700 ns and duty cycle was extremely low. Typical specific absorption rate (SAR) throughout the prostate was 70-90 kW/kg during pulsing, but time-averaged SAR was below 2 W/kg. TA pressure pulses generated by rapid heating due to EM energy deposition were detected using single element transducers. 15g/L glycine powder mixed into DI water served as acoustic couplant, which was chilled to prevent autolysis. Spatial encoding was performed by scanning in tomographic "step-and-shoot" mode, with 3 mm translation between slices and 1.8-degree rotation between tomographic views. Histology slides for 3 cases scanned with 2.25 MHz transducers were marked for comparison to TA reconstructions. These three cases showed little, moderate, and severe involvement in the histology levels surrounding the verumontanum. TA signal strength decreased with percent cancerous involvement. When VHF is used for tissue heating, the TA contrast mechanism is driven by ionic content and we observed suppressed TA signal from diseased prostate tissue in the peripheral zone. For the 45 regions of interest analyzed, a reconstruction value of 0.4 mV provides 100% sensitivity but only 29% specificity.

Pursuing sustainable development in Norway: The challenge of living up to Brundtland at home

NARCIS (Netherlands)

Lafferty, W.M.; Knudsen, Jørgen; Larsen, Olav Mosvold

2007-01-01

With the Norwegian Prime Minister, Gro Harlem Brundtland, as chair of the World Commission on Environment and Development, Norway became an early mover in politics for sustainable development (SD). The pursuit of SD goals has been expressed in several national policy documents, though it was not

Physical conditions in the central region, and the nature of the engine

International Nuclear Information System (INIS)

Cavaliere, A.

1983-01-01

The phenomena associated with Active Galactic Nuclei raise three main astrophysical problems: the nature of the primary source of energy; the physical conditions within the radiation source; the nature of the population evolution over cosmological time-scales. The author outlines the links between these problems. The Prime Mover is very likely to be a converter of gravitational energy in a very compact mass configuration. The associated radiation source, if it is also very compact, is so efficient and loss-dominated as to require specific conditions for the power transport and supply to the radiating particles: collisionless, effected by electromagnetic fields coherent on scales collective or macroscopic, to the point of producing at times anisotropic bulk motions. Very compact Prime Movers working at high regimes need also a compact mass supply; the output from these compound engines undergoes a characteristic change that accounts for the type of population evolutions of the associated sources. (orig.)

Rhizosphere priming: a nutrient perspective

Directory of Open Access Journals (Sweden)

Feike Auke Dijkstra

2013-07-01

Full Text Available Rhizosphere priming is the change in decomposition of soil organic matter (SOM caused by root activity. Rhizosphere priming plays a crucial role in soil carbon (C dynamics and their response to global climate change. Rhizosphere priming may be affected by soil nutrient availability, but rhizosphere priming itself can also affect nutrient supply to plants. These interactive effects may be of particular relevance in understanding the sustained increase in plant growth and nutrient supply in response to a rise in atmospheric CO2 concentration. We examined how these interactions were affected by elevated CO2 in two similar semiarid grassland field studies. We found that an increase in rhizosphere priming enhanced the release of nitrogen (N through decomposition of a larger fraction of SOM in one study, but not in the other. We postulate that rhizosphere priming may enhance N supply to plants in systems that are N limited, but that rhizosphere priming may not occur in systems that are phosphorus (P limited. Under P limitation, rhizodeposition may be used for mobilisation of P, rather than for decomposition of SOM. Therefore, with increasing atmospheric CO2 concentrations, rhizosphere priming may play a larger role in affecting C sequestration in N poor than in P poor soils.

Degree of handedness and priming: Further evidence for a distinction between production and identification priming mechanisms.

Directory of Open Access Journals (Sweden)

Donna J. LaVoie

2015-02-01

Full Text Available The distinction between implicit and explicit forms of memory retrieval is long-standing, and important to the extent it reveals how different neural architecture supports different aspects of memory function. Similarly, distinctions have been made between kinds of repetition priming, a form of implicit memory retrieval. This study focuses on the production-identification priming distinction, which delineates priming tasks involving verification of stimulus features as compared to priming tasks that require use of a cue to guide response retrieval. Studies investigating this dissociation in dementia or similar patient populations indicate that these forms of priming may differ in their neural bases. The current study looks at degree of handedness as a way of investigating inferred neural architecture supporting these two forms of priming. A growing body of research indicates that degree of handedness (consistent, or CH, versus inconsistent, or ICH is associated with greater interhemispheric interaction and functional access to right hemisphere processing in ICH, with superior performance seen in ICH on memory tasks reliant on this processing. Arguments about the theoretical mechanisms underlying identification and production forms of perceptual priming tasks suggest that performance on these tasks will differ as a function of degree of handedness. We tested this question in a group of CH and ICH young adults, who were asked to study lists of words prior to performing a production priming task (word stem completion, a perceptual word identification task, and a word stem cued recall task. While both handedness groups exhibited reliable priming across tasks, word stem completion priming was greater in ICH than CH participants, with identification priming not differing between groups. This dissociation supports the argument that production and identification forms of priming have different underlying neural bases.

Rapid response learning of brand logo priming: Evidence that brand priming is not dominated by rapid response learning.

Science.gov (United States)

Boehm, Stephan G; Smith, Ciaran; Muench, Niklas; Noble, Kirsty; Atherton, Catherine

2017-08-31

Repetition priming increases the accuracy and speed of responses to repeatedly processed stimuli. Repetition priming can result from two complementary sources: rapid response learning and facilitation within perceptual and conceptual networks. In conceptual classification tasks, rapid response learning dominates priming of object recognition, but it does not dominate priming of person recognition. This suggests that the relative engagement of network facilitation and rapid response learning depends on the stimulus domain. Here, we addressed the importance of the stimulus domain for rapid response learning by investigating priming in another domain, brands. In three experiments, participants performed conceptual decisions for brand logos. Strong priming was present, but it was not dominated by rapid response learning. These findings add further support to the importance of the stimulus domain for the relative importance of network facilitation and rapid response learning, and they indicate that brand priming is more similar to person recognition priming than object recognition priming, perhaps because priming of both brands and persons requires individuation.

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially.

Science.gov (United States)

Kiefer, Markus; Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2017-04-01

Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end, we investigated the modulation of masked pictorial vs verbal priming by previously activated perceptual vs semantic task sets and assessed the electrophysiological correlates of priming using event-related potential (ERP) recordings. Behavioral and electrophysiological effects showed a differential modulation of pictorial and verbal subliminal priming by previously activated task sets: Pictorial priming was only observed during the perceptual but not during the semantic task set. Verbal priming, in contrast, was found when either task set was activated. Furthermore, only verbal priming was associated with a modulation of the N400 ERP component, an index of semantic processing, whereas a priming-related modulation of earlier ERPs, indexing visuo-motor S-R activation, was found for both picture and words. The results thus demonstrate that different neuro-cognitive processes contribute to unconscious evaluative priming depending on the stimulus format. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

A Prime Example of the Maluma/Takete Effect? Testing for Sound Symbolic Priming.

Science.gov (United States)

Sidhu, David M; Pexman, Penny M

2017-09-01

Certain nonwords, like maluma and takete, are associated with roundness and sharpness, respectively. However, this has typically been demonstrated using explicit tasks. We investigated whether this association would be detectable using a more implicit measure-a sequential priming task. We began with a replication of the standard Maluma/Takete effect (Experiments 1a and 1b) before examining whether round and sharp nonword primes facilitated the categorization of congruent shapes (Experiment 2). We found modest evidence of a priming effect in response accuracy. We next examined whether nonword primes affected categorization of ambiguous shapes, using visual (Experiment 3) and auditory primes (Experiment 4). We found that ambiguous shapes were categorized as round (sharp) more often following the presentation of a round (sharp) nonword. This suggests that phonemes may activate related shape information which then affects the processing of shapes, and that this association emerges even when participants are not explicitly searching for it. Copyright © 2016 Cognitive Science Society, Inc.

Experimental study of thermoacoustic effects on a single plate. Pt. 1. Temperature fields

Energy Technology Data Exchange (ETDEWEB)

Wetzel, M.; Herman, C. [Johns Hopkins Univ., Baltimore, MD (USA). Dept. of Mech. Eng.

2000-03-01

The thermal interaction between a heated solid plate and the acoustically driven working fluid was investigated by visualizing and quantifying the temperature fields in the neighbourhood of the solid plate. A combination of holographic interferometry and high-speed cinematography was applied in the measurements. A better knowledge of these temperature fields is essential to develop systematic design methodologies for heat exchangers in oscillatory flows. The difference between heat transfer in oscillatory flows with zero mean velocity and steady-state flows is demonstrated in the paper. Instead of heat transfer from a heated solid surface to the colder bulk fluid, the visualized temperature fields indicated that heat was transferred from the working fluid into the stack plate at the edge of the plate. In the experiments, the thermoacoustic effect was visualized through the temperature measurements. A novel evaluation procedure that accounts for the influence of the acoustic pressure variations on the refractive index was applied to accurately reconstruct the high-speed, two-dimensional oscillating temperature distributions. (orig.)

46 CFR 130.460 - Placement of machinery alarms.

Science.gov (United States)

2010-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS VESSEL CONTROL... the following: (1) Loss of power for propulsion control. (2) Loss of power to the steering motor or... engine and each prime mover of a generator— (i) High lube-oil temperature; and (ii) High jacket-water...

In vivo tumor detection with combined MR–Photoacoustic-Thermoacoustic imaging

Directory of Open Access Journals (Sweden)

Lin Huang

2016-09-01

Full Text Available Here, we report a new method using combined magnetic resonance (MR–Photoacoustic (PA–Thermoacoustic (TA imaging techniques, and demonstrate its unique ability for in vivo cancer detection using tumor-bearing mice. Circular scanning TA and PA imaging systems were used to recover the dielectric and optical property distributions of three colon carcinoma bearing mice While a 7.0-T magnetic resonance imaging (MRI unit with a mouse body volume coil was utilized for high resolution structural imaging of the same mice. Three plastic tubes filled with soybean sauce were used as fiducial markers for the co-registration of MR, PA and TA images. The resulting fused images provided both enhanced tumor margin and contrast relative to the surrounding normal tissues. In particular, some finger-like protrusions extending into the surrounding tissues were revealed in the MR/TA infused images. These results show that the tissue functional optical and dielectric properties provided by PA and TA images along with the anatomical structure by MRI in one picture make accurate tumor identification easier. This combined MR–PA–TA-imaging strategy has the potential to offer a clinically useful triple-modality tool for accurate cancer detection and for intraoperative surgical navigation.

Prime Slaughter

DEFF Research Database (Denmark)

Valente, Andrea; Marchetti, Emanuela

2011-01-01

of primality and factorization into playful interactions, addressed to primary and early secondary school children. Taking into account individual needs expressed by children regarding play, during a participatory design processes aimed at enhancing learning in museums, Prime Slaughter allows for multiple......Starting from the difficulty of creating playful representation of domain-specific abstract concepts, this study discusses the design of Prime Slaughter, a computer game aimed at facilitating individual sense-making of abstract mathematical concepts. Specifically the game proposes a transposition...

Passive control of thermoacoustic instabilities in swirl-stabilized combustion at elevated pressures

Directory of Open Access Journals (Sweden)

L Justin Williams

2016-09-01

Full Text Available In this study, a porous insert is placed at the dump plane of a swirl-stabilized lean premixed combustor to passively suppress thermoacoustic instabilities. The diffuser-shaped annular ring of porous inert material influences the turbulent flow field directly, including recirculation zones and vortical and/or shear layer structures to passively control the acoustic performance of the combustor. The porous inert material is made of silicon carbide–hafnium carbide coated, high-strength, high-temperature-resistant open-cell foam materials. In this study, the porous insert concept is investigated at above-ambient operating pressures to demonstrate its suitability for practical combustion applications. Experiments are conducted in quartz and metal combustors, without and with the porous insert while varying operating pressure, equivalence ratio, and reactant flow rate. Measurements show that the porous insert, and consequent changes in the combustor flow field, decrease the sound pressure levels at the frequency of combustion instability at all operating conditions investigated in this study. The porous insert also decreases the broadband combustion noise, i.e. the measured sound pressure levels over a wide frequency range.

Discovery: Prime Numbers

Science.gov (United States)

de Mestre, Neville

2008-01-01

Prime numbers are important as the building blocks for the set of all natural numbers, because prime factorisation is an important and useful property of all natural numbers. Students can discover them by using the method known as the Sieve of Eratosthenes, named after the Greek geographer and astronomer who lived from c. 276-194 BC. Eratosthenes…

Fluid-dynamic design and characterization of a mini-ORC turbine for laboratory experiments

NARCIS (Netherlands)

Pini, M.; de Servi, C.M.; Burigana, M.; Bahamonde Noriega, Juan S.; Rubino, A.; Vitale, S.; Colonna di Paliano, Piero; Dossena, V.; Guardone, A.; Astolfi, M.

2017-01-01

High temperature Organic Rankine Cycles power systems of low power capacity, i.e. 3-50 kW_e, are receiving recognition for distributed and mobile energy generation applications. For this type of power plants, it is customary to adopt a radial-turbine as prime mover, essentially for

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

Gas turbines have wide application as prime movers in transportation and power generating sectors,most of which are driven by fossil fuels like kerosene. The conventional fuels are associated with problems of air pollution, and the fuel reserves are getting depleted gradually. Addition of ethanol in kerosene leads to better ...

An Efficiency Optimizing Shaft Speed Control for Ships in Moderate Seas

DEFF Research Database (Denmark)

Blanke, Mogens; Pivano, Luca; Johansen, Tor Arne

2007-01-01

Ships in moderate sea experience time-varying thrust and torque load on the shaft of their prime mover. The reason is the varying inflow velocity to the propeller during the passage of a wave. This variation has been considered a nuisance to the main engine control where the induced fluctuations...

A Novel Strategy for Raising the Unit Output of Large Synchronous ...

African Journals Online (AJOL)

In power systems, the major source of electrical energy is the synchronous generator. However, the increase in the unit size of the conventional synchronous generator has not kept pace with the corresponding increase in the unit output of prime movers driving them, and the demand for electrical energy keeps growing.

Design of a Thermoacoustic Sensor for Low Intensity Ultrasound Measurements Based on an Artificial Neural Network

Directory of Open Access Journals (Sweden)

Jida Xing

2015-06-01

Full Text Available In therapeutic ultrasound applications, accurate ultrasound output intensities are crucial because the physiological effects of therapeutic ultrasound are very sensitive to the intensity and duration of these applications. Although radiation force balance is a benchmark technique for measuring ultrasound intensity and power, it is costly, difficult to operate, and compromised by noise vibration. To overcome these limitations, the development of a low-cost, easy to operate, and vibration-resistant alternative device is necessary for rapid ultrasound intensity measurement. Therefore, we proposed and validated a novel two-layer thermoacoustic sensor using an artificial neural network technique to accurately measure low ultrasound intensities between 30 and 120 mW/cm2. The first layer of the sensor design is a cylindrical absorber made of plexiglass, followed by a second layer composed of polyurethane rubber with a high attenuation coefficient to absorb extra ultrasound energy. The sensor determined ultrasound intensities according to a temperature elevation induced by heat converted from incident acoustic energy. Compared with our previous one-layer sensor design, the new two-layer sensor enhanced the ultrasound absorption efficiency to provide more rapid and reliable measurements. Using a three-dimensional model in the K-wave toolbox, our simulation of the ultrasound propagation process demonstrated that the two-layer design is more efficient than the single layer design. We also integrated an artificial neural network algorithm to compensate for the large measurement offset. After obtaining multiple parameters of the sensor characteristics through calibration, the artificial neural network is built to correct temperature drifts and increase the reliability of our thermoacoustic measurements through iterative training about ten seconds. The performance of the artificial neural network method was validated through a series of experiments. Compared

Design of a Thermoacoustic Sensor for Low Intensity Ultrasound Measurements Based on an Artificial Neural Network.

Science.gov (United States)

Xing, Jida; Chen, Jie

2015-06-23

In therapeutic ultrasound applications, accurate ultrasound output intensities are crucial because the physiological effects of therapeutic ultrasound are very sensitive to the intensity and duration of these applications. Although radiation force balance is a benchmark technique for measuring ultrasound intensity and power, it is costly, difficult to operate, and compromised by noise vibration. To overcome these limitations, the development of a low-cost, easy to operate, and vibration-resistant alternative device is necessary for rapid ultrasound intensity measurement. Therefore, we proposed and validated a novel two-layer thermoacoustic sensor using an artificial neural network technique to accurately measure low ultrasound intensities between 30 and 120 mW/cm2. The first layer of the sensor design is a cylindrical absorber made of plexiglass, followed by a second layer composed of polyurethane rubber with a high attenuation coefficient to absorb extra ultrasound energy. The sensor determined ultrasound intensities according to a temperature elevation induced by heat converted from incident acoustic energy. Compared with our previous one-layer sensor design, the new two-layer sensor enhanced the ultrasound absorption efficiency to provide more rapid and reliable measurements. Using a three-dimensional model in the K-wave toolbox, our simulation of the ultrasound propagation process demonstrated that the two-layer design is more efficient than the single layer design. We also integrated an artificial neural network algorithm to compensate for the large measurement offset. After obtaining multiple parameters of the sensor characteristics through calibration, the artificial neural network is built to correct temperature drifts and increase the reliability of our thermoacoustic measurements through iterative training about ten seconds. The performance of the artificial neural network method was validated through a series of experiments. Compared to our previous

Superficial Priming in Episodic Recognition

Science.gov (United States)

Dopkins, Stephen; Sargent, Jesse; Ngo, Catherine T.

2010-01-01

We explored the effect of superficial priming in episodic recognition and found it to be different from the effect of semantic priming in episodic recognition. Participants made recognition judgments to pairs of items, with each pair consisting of a prime item and a test item. Correct positive responses to the test item were impeded if the prime…

Syntactic priming in American Sign Language.

Science.gov (United States)

Hall, Matthew L; Ferreira, Victor S; Mayberry, Rachel I

2015-01-01

Psycholinguistic studies of sign language processing provide valuable opportunities to assess whether language phenomena, which are primarily studied in spoken language, are fundamentally shaped by peripheral biology. For example, we know that when given a choice between two syntactically permissible ways to express the same proposition, speakers tend to choose structures that were recently used, a phenomenon known as syntactic priming. Here, we report two experiments testing syntactic priming of a noun phrase construction in American Sign Language (ASL). Experiment 1 shows that second language (L2) signers with normal hearing exhibit syntactic priming in ASL and that priming is stronger when the head noun is repeated between prime and target (the lexical boost effect). Experiment 2 shows that syntactic priming is equally strong among deaf native L1 signers, deaf late L1 learners, and hearing L2 signers. Experiment 2 also tested for, but did not find evidence of, phonological or semantic boosts to syntactic priming in ASL. These results show that despite the profound differences between spoken and signed languages in terms of how they are produced and perceived, the psychological representation of sentence structure (as assessed by syntactic priming) operates similarly in sign and speech.

Repetition Priming Magnitude Depends on Affirmative Prime Responses: A Test of Two Congruity Explanations.

Science.gov (United States)

Fiet, Paula; Sorensen, Linda; Mayne, Zachary; Corgiat, Damon; Woltz, Dan

2016-01-01

We conducted 2 experiments to evaluate the impact of positive prime responses on repetition priming effects while decoupling this impact from content congruity and specific evaluation operations. Our first experiment consisted of word-meaning comparison trials that required participants to evaluate synonyms or antonyms. A crossing of evaluation operation with semantic content allowed us to test the goal-content congruity hypothesis against the semantic congruity explanation for greater facilitation from positive response primes. Results suggested that operation-based priming is affected by goal-content congruity. A second experiment tested the observed effect of positive responses on repetition priming using mental rotation of irregular shapes, affording a test of the impact of congruity in evaluation goals and content in a nonverbal stimulus domain. Both experiments produced a pattern of results inconsistent with Schulman's (1974) semantic congruity account and instead implicated a different form of congruity that affects memory for prior operations rather than memory for semantic and episodic content.

Complex architecture of primes and natural numbers.

Science.gov (United States)

García-Pérez, Guillermo; Serrano, M Ángeles; Boguñá, Marián

2014-08-01

Natural numbers can be divided in two nonoverlapping infinite sets, primes and composites, with composites factorizing into primes. Despite their apparent simplicity, the elucidation of the architecture of natural numbers with primes as building blocks remains elusive. Here, we propose a new approach to decoding the architecture of natural numbers based on complex networks and stochastic processes theory. We introduce a parameter-free non-Markovian dynamical model that naturally generates random primes and their relation with composite numbers with remarkable accuracy. Our model satisfies the prime number theorem as an emerging property and a refined version of Cramér's conjecture about the statistics of gaps between consecutive primes that seems closer to reality than the original Cramér's version. Regarding composites, the model helps us to derive the prime factors counting function, giving the probability of distinct prime factors for any integer. Probabilistic models like ours can help to get deeper insights about primes and the complex architecture of natural numbers.

Z(prime) Phenomenology and the LHC

International Nuclear Information System (INIS)

Rizzo, Thomas G.

2006-01-01

A brief pedagogical overview of the phenomenology of Z(prime) gauge bosons is ILC in determining Z(prime) properties is also discussed. and explore in detail how the LHC may discover and help elucidate the models, review the current constraints on the possible properties of a Z(prime) nature of these new particles. We provide an overview of the Z(prime) studies presented. Such particles can arise in various electroweak extensions of that have been performed by both ATLAS and CMS. The role of the the Standard Model (SM). We provide a quick survey of a number of Z(prime)

Transposed-letter priming of prelexical orthographic representations.

Science.gov (United States)

Kinoshita, Sachiko; Norris, Dennis

2009-01-01

A prime generated by transposing two internal letters (e.g., jugde) produces strong priming of the original word (judge). In lexical decision, this transposed-letter (TL) priming effect is generally weak or absent for nonword targets; thus, it is unclear whether the origin of this effect is lexical or prelexical. The authors describe the Bayesian Reader theory of masked priming (D. Norris & S. Kinoshita, 2008), which explains why nonwords do not show priming in lexical decision but why they do in the cross-case same-different task. This analysis is followed by 3 experiments that show that priming in this task is not based on low-level perceptual similarity between the prime and target, or on phonology, to make the case that priming is based on prelexical orthographic representation. The authors then use this task to demonstrate equivalent TL priming effects for nonwords and words. The results are interpreted as the first reliable evidence based on the masked priming procedure that letter position is not coded absolutely within the prelexical, orthographic representation. The implications of the results for current letter position coding schemes are discussed.

Wrath of God: religious primes and punishment.

Science.gov (United States)

McKay, Ryan; Efferson, Charles; Whitehouse, Harvey; Fehr, Ernst

2011-06-22

Recent evidence indicates that priming participants with religious concepts promotes prosocial sharing behaviour. In the present study, we investigated whether religious priming also promotes the costly punishment of unfair behaviour. A total of 304 participants played a punishment game. Before the punishment stage began, participants were subliminally primed with religion primes, secular punishment primes or control primes. We found that religious primes strongly increased the costly punishment of unfair behaviours for a subset of our participants--those who had previously donated to a religious organization. We discuss two proximate mechanisms potentially underpinning this effect. The first is a 'supernatural watcher' mechanism, whereby religious participants punish unfair behaviours when primed because they sense that not doing so will enrage or disappoint an observing supernatural agent. The second is a 'behavioural priming' mechanism, whereby religious primes activate cultural norms pertaining to fairness and its enforcement and occasion behaviour consistent with those norms. We conclude that our results are consistent with dual inheritance proposals about religion and cooperation, whereby religions harness the byproducts of genetically inherited cognitive mechanisms in ways that enhance the survival prospects of their adherents.

46 CFR 116.202 - Plans and information required.

Science.gov (United States)

2010-10-01

... 525, Washington, DC 20024, or transmitted by mail to: Commanding Officer, U.S. Coast Guard Marine Safety Center, 2100 2nd St. SW., Stop 7102, Washington, DC 20593-7102, in a written or electronic format...) Bills of materials; (iv) Type and size of generators and prime movers; (v) Type and size of generator...

Recognizing Plant Defense Priming

NARCIS (Netherlands)

Martinez-Medina, Ainhoa; Flors, Victor; Heil, Martin; Mauch-Mani, Brigitte; Pieterse, Corné M J|info:eu-repo/dai/nl/113115113; Pozo, Maria J; Ton, Jurriaan; van Dam, Nicole M; Conrath, Uwe

2016-01-01

Defense priming conditions diverse plant species for the superinduction of defense, often resulting in enhanced pest and disease resistance and abiotic stress tolerance. Here, we propose a guideline that might assist the plant research community in a consistent assessment of defense priming in

Recognizing plant defense priming

NARCIS (Netherlands)

Martinez-Medina, A.; Flors, V.; Heil, M.; Mauch-Mani, B.; Pieterse, C.M.J.; Pozo, M.J.; Ton, J.; Van Dam, N.M.; Conrath, U.

2016-01-01

Defense priming conditions diverse plant species for the superinduction of defense, often resulting in enhanced pest and disease resistance and abiotic stress tolerance. Here, we propose a guideline that might assist the plant research community in a consistent assessment of defense priming in

Syntactic priming in American Sign Language.

Directory of Open Access Journals (Sweden)

Matthew L Hall

Full Text Available Psycholinguistic studies of sign language processing provide valuable opportunities to assess whether language phenomena, which are primarily studied in spoken language, are fundamentally shaped by peripheral biology. For example, we know that when given a choice between two syntactically permissible ways to express the same proposition, speakers tend to choose structures that were recently used, a phenomenon known as syntactic priming. Here, we report two experiments testing syntactic priming of a noun phrase construction in American Sign Language (ASL. Experiment 1 shows that second language (L2 signers with normal hearing exhibit syntactic priming in ASL and that priming is stronger when the head noun is repeated between prime and target (the lexical boost effect. Experiment 2 shows that syntactic priming is equally strong among deaf native L1 signers, deaf late L1 learners, and hearing L2 signers. Experiment 2 also tested for, but did not find evidence of, phonological or semantic boosts to syntactic priming in ASL. These results show that despite the profound differences between spoken and signed languages in terms of how they are produced and perceived, the psychological representation of sentence structure (as assessed by syntactic priming operates similarly in sign and speech.

Multisensory Flavor Priming

DEFF Research Database (Denmark)

Dijksterhuis, Garmt Bernard

2016-01-01

with a taxonomy of different priming situations. In food-related applications of flavor, both bottom-up (sensory) as well as top-down (expectations) processes are at play. Most of the complex interactions that this leads to take place outside the awareness of the perceiving subject. A model is presented where...... many, past and current, aspects (sensory, surroundings, social, somatic, sentimental) of a (flavor) perception, together result in the perception of a flavor, its liking. or its choice. This model borrows on ideas from priming, situated/embodied cognition, and (food-related) perception.......Flavor is multisensory; several interacting sensory systems-taste, smell, and mouthfeel-together comprise "flavor," making it a cognitively constructed percept rather than a bottom-up sensory one. In this chapter, some of the complications this entails for flavor priming are introduced, along...

Semantic priming, not repetition priming, is to blame for false hearing.

Science.gov (United States)

Rogers, Chad S

2017-08-01

Contextual and sensory information are combined in speech perception. Conflict between the two can lead to false hearing, defined as a high-confidence misidentification of a spoken word. Rogers, Jacoby, and Sommers (Psychology and Aging, 27(1), 33-45, 2012) found that older adults are more susceptible to false hearing than are young adults, using a combination of semantic priming and repetition priming to create context. In this study, the type of context (repetition vs. sematic priming) responsible for false hearing was examined. Older and young adult participants read and listened to a list of paired associates (e.g., ROW-BOAT) and were told to remember the pairs for a later memory test. Following the memory test, participants identified words masked in noise that were preceded by a cue word in the clear. Targets were semantically associated to the cue (e.g., ROW-BOAT), unrelated to the cue (e.g., JAW-PASS), or phonologically related to a semantic associate of the cue (e.g., ROW-GOAT). How often each cue word and its paired associate were presented prior to the memory test was manipulated (0, 3, or 5 times) to test effects of repetition priming. Results showed repetitions had no effect on rates of context-based listening or false hearing. However, repetition did significantly increase sensory information as a basis for metacognitive judgments in young and older adults. This pattern suggests that semantic priming dominates as the basis for false hearing and highlights context and sensory information operating as qualitatively different bases for listening and metacognition.

Modified Multi Prime RSA Cryptosystem

Science.gov (United States)

Ghazali Kamardan, M.; Aminudin, N.; Che-Him, Norziha; Sufahani, Suliadi; Khalid, Kamil; Roslan, Rozaini

2018-04-01

RSA [1] is one of the mostly used cryptosystem in securing data and information. Though, it has been recently discovered that RSA has some weaknesses and in advance technology, RSA is believed to be inefficient especially when it comes to decryption. Thus, a new algorithm called Multi prime RSA, an extended version of the standard RSA is studied. Then, a modification is made to the Multi prime RSA where another keys is shared secretly between the receiver and the sender to increase the securerity. As in RSA, the methodology used for modified Multi-prime RSA also consists of three phases; 1. Key Generation in which the secret and public keys are generated and published. In this phase, the secrecy is improved by adding more prime numbers and addition of secret keys. 2. Encryption of the message using the public and secret keys given. 3. Decryption of the secret message using the secret key generated. For the decryption phase, a method called Chinese Remainder Theorem is used which helps to fasten the computation. Since Multi prime RSA use more than two prime numbers, the algorithm is more efficient and secure when compared to the standard RSA. Furthermore, in modified Multi prime RSA another secret key is introduced to increase the obstacle to the attacker. Therefore, it is strongly believed that this new algorithm is better and can be an alternative to the RSA.

The pros and cons of masked priming.

Science.gov (United States)

Forster, K I

1998-03-01

Masked priming paradigms offer the promise of tapping automatic, strategy-free lexical processing, as evidenced by the lack of expectancy disconfirmation effects, and proportionality effects in semantic priming experiments. But several recent findings suggest the effects may be prelexical. These findings concern nonword priming effects in lexical decision and naming, the effects of mixed-case presentation on nonword priming, and the dependence of priming on the nature of the distractors in lexical decision, suggesting possible strategy effects. The theory underlying each of these effects is discussed, and alternative explanations are developed that do not preclude a lexical basis for masked priming effects.

Priming Ability Emotional Intelligence

Science.gov (United States)

Schutte, Nicola S.; Malouff, John M.

2012-01-01

Two studies examined whether priming self-schemas relating to successful emotional competency results in better emotional intelligence performance. In the first study participants were randomly assigned to a successful emotional competency self-schema prime condition or a control condition and then completed an ability measure of emotional…

Psychotherapy augmentation through preconscious priming

Directory of Open Access Journals (Sweden)

Francois eBorgeat

2013-03-01

Full Text Available Objective: To test the hypothesis that repeated preconscious (masked priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition involved listening twice daily with a passive attitude to a recording of individualized formulations of appropriate cognitions and attitudes masked by music. The Control condition involved listening to an indistinguishable recording where the formulations had been replaced by random numbers. Changes in social cognitions were measured by the Social Interaction Self Statements Test (SISST.Results: Patients improved following therapy. The Priming procedure was associated with increased positive cognitions and decreased negative cognitions on the SISST while the Control procedure was not. The Priming procedure induced more cognitive change when applied immediately after the group therapy. Conclusion: An effect of priming was observed on social phobia related cognitions in the expected direction. This self administered addition to a therapy could be seen as an augmentation strategy.

Effect of Barbell Weight on the Structure of the Flat Bench Press.

Science.gov (United States)

Król, Henryk; Gołaś, Artur

2017-05-01

Król, H and Gołaś, A. Effect of barbell weight on the structure of the flat bench press. J Strength Cond Res 31(5): 1321-1337, 2017-In this study, we have used the multimodular measuring system SMART. The system consisted of 6 infrared cameras and a wireless module to measure muscle bioelectric activity. In addition, the path of the barbell was measured with a special device called the pantograph. Our study concerns the change in the structure of the flat bench press when the weight of the barbell is increased. The research on the bench press technique included both the causes of the motion: the internal structure of the movement and the external kinematic structure showing the effects of the motion, i.e., all the characteristics of the movement. Twenty healthy, male recreational weight trainers with at least 1 year of lifting experience (the mean ± SD = 3.3 ± 1.6 years) were recruited for this study. The subjects had a mean body mass of 80.2 ± 8.6 kg, an average height of 1.77 ± 0.08 m, and their average age was 24.7 ± 0.9 years. In the measuring session, the participants performed consecutive sets of a single repetition of bench pressing with an increasing load (about 70, 80, 90, and 100% of their 1 repetition maximum [1RM]). The results showed a significant change in the phase structure of the bench press, as the barbell weight was increased. While doing the bench press at a 100% 1RM load, the pectoralis major changes from being the prime mover to being the supportive prime mover. At the same time, the role of the prime mover is taken on by the deltoideus anterior. The triceps brachii, in particular, clearly shows a greater involvement.

Prime time news: the influence of primed positive and negative emotion on susceptibility to false memories.

Science.gov (United States)

Porter, Stephen; ten Brinke, Leanne; Riley, Sean N; Baker, Alysha

2014-01-01

We examined the relation between emotion and susceptibility to misinformation using a novel paradigm, the ambiguous stimuli affective priming (ASAP) paradigm. Participants (N = 88) viewed ambiguous neutral images primed either at encoding or retrieval to be interpreted as either highly positive or negative (or neutral/not primed). After viewing the images, they either were asked misleading or non-leading questions. Following a delay, memory accuracy for the original images was assessed. Results indicated that any emotional priming at encoding led to a higher susceptibility to misinformation relative to priming at recall. In particular, inducing a negative interpretation of the image at encoding led to an increased susceptibility of false memories for major misinformation (an entire object not actually present in the scene). In contrast, this pattern was reversed when priming was used at recall; a negative reinterpretation of the image decreased memory distortion relative to unprimed images. These findings suggest that, with precise experimental control, the experience of emotion at event encoding, in particular, is implicated in false memory susceptibility.

Energy Decisions: Is Solar Power the Solution?

Science.gov (United States)

Childress, Vincent W.

2011-01-01

People around the world are concerned about affordable energy. It is needed to power the global economy. Petroleum-based transportation and coal-fired power plants are economic prime movers fueling the global economy, but coal and gasoline are also the leading sources of air pollution. Both of these sources produce greenhouse gases and toxins.…

Community Learning Campus: It Takes a Simple Message to Build a Complex Project

Science.gov (United States)

Pearson, George

2012-01-01

Education Canada asked Tom Thompson, president of Olds College and a prime mover behind the Community Learning Campus (CLC): What were the lessons learned from this unusually ambitious education project? Thompson mentions six lessons he learned from this complex project which include: (1) Dream big, build small, act now; (2) Keep a low profile at…

Flutter Instability of a Fluid-Conveying Fluid-Immersed Pipe Affixed to a Rigid Body

Science.gov (United States)

2011-01-01

rigid body, denoted by y in Fig. 4, is small. This is in addition to the Euler– Bernoulli beam assumption that the slope of the tail is small everywhere...here. These include the efficiency with which the prime mover can generate fluid momentum , pipe losses, and external drag acting on both the hull and the

Low Mach number analysis of idealized thermoacoustic engines with numerical solution.

Science.gov (United States)

Hireche, Omar; Weisman, Catherine; Baltean-Carlès, Diana; Le Quéré, Patrick; Bauwens, Luc

2010-12-01

A model of an idealized thermoacoustic engine is formulated, coupling nonlinear flow and heat exchange in the heat exchangers and stack with a simple linear acoustic model of the resonator and load. Correct coupling results in an asymptotically consistent global model, in the small Mach number approximation. A well-resolved numerical solution is obtained for two-dimensional heat exchangers and stack. The model assumes that the heat exchangers and stack are shorter than the overall length by a factor of the order of a representative Mach number. The model is well-suited for simulation of the entire startup process, whereby as a result of some excitation, an initially specified temperature profile in the stack evolves toward a near-steady profile, eventually reaching stationary operation. A validation analysis is presented, together with results showing the early amplitude growth and approach of a stationary regime. Two types of initial excitation are used: Random noise and a small periodic wave. The set of assumptions made leads to a heat-exchanger section that acts as a source of volume but is transparent to pressure and to a local heat-exchanger model characterized by a dynamically incompressible flow to which a locally spatially uniform acoustic pressure fluctuation is superimposed.

Stack Parameters Effect on the Performance of Anharmonic Resonator Thermoacoustic Heat Engine

KAUST Repository

Nouh, Mostafa A.; Arafa, Nadim M.; Abdel-Rahman, Ehab

2014-01-01

A thermoacoustic heat engine (TAHE) converts heat into acoustic power with no moving parts. It exhibits several advantages over traditional engines, such as simple design, stable functionality, and environment-friendly working gas. In order to further improve the performance of TAHE, stack parameters need to be optimized. Stack's position, length and plate spacing are the three main parameters that have been investigated in this study. Stack's position dictates both the efficiency and the maximum produced acoustic power of the heat engine. Positioning the stack closer to the pressure anti-node might ensure high efficiency on the expense of the maximum produced acoustic power. It is noticed that the TAHE efficiency can further be improved by spacing the plates of the stack at a value of 2.4 of the thermal penetration depth, δk . Changes in the stack length will not affect the efficiency much as long as the temperature gradient across the stack, as a ratio of the critical temperature gradient ψ is more than 1. Upon interpreting the effect of these variations, attempts are made towards reaching the engine's most powerful operating point.

Stack Parameters Effect on the Performance of Anharmonic Resonator Thermoacoustic Heat Engine

KAUST Repository

Nouh, Mostafa A.

2014-01-01

A thermoacoustic heat engine (TAHE) converts heat into acoustic power with no moving parts. It exhibits several advantages over traditional engines, such as simple design, stable functionality, and environment-friendly working gas. In order to further improve the performance of TAHE, stack parameters need to be optimized. Stack\\'s position, length and plate spacing are the three main parameters that have been investigated in this study. Stack\\'s position dictates both the efficiency and the maximum produced acoustic power of the heat engine. Positioning the stack closer to the pressure anti-node might ensure high efficiency on the expense of the maximum produced acoustic power. It is noticed that the TAHE efficiency can further be improved by spacing the plates of the stack at a value of 2.4 of the thermal penetration depth, δk . Changes in the stack length will not affect the efficiency much as long as the temperature gradient across the stack, as a ratio of the critical temperature gradient ψ is more than 1. Upon interpreting the effect of these variations, attempts are made towards reaching the engine\\'s most powerful operating point.

Microwave pumped high-efficient thermoacoustic tumor therapy with single wall carbon nanotubes.

Science.gov (United States)

Wen, Liewei; Ding, Wenzheng; Yang, Sihua; Xing, Da

2016-01-01

The ultra-short pulse microwave could excite to the strong thermoacoustic (TA) shock wave and deeply penetrate in the biological tissues. Based on this, we developed a novel deep-seated tumor therapy modality with mitochondria-targeting single wall carbon nanotubes (SWNTs) as microwave absorbing agents, which act efficiently to convert ultra-short microwave energy into TA shock wave and selectively destroy the targeted mitochondria, thereby inducing apoptosis in cancer cells. After the treatment of SWNTs (40 μg/mL) and ultra-short microwave (40 Hz, 1 min), 77.5% of cancer cells were killed and the vast majority were caused by apoptosis that initiates from mitochondrial damage. The orthotopic liver cancer mice were established as deep-seated tumor model to investigate the anti-tumor effect of mitochondria-targeting TA therapy. The results suggested that TA therapy could effectively inhibit the tumor growth without any observable side effects, while it was difficult to achieve with photothermal or photoacoustic therapy. These discoveries implied the potential application of TA therapy in deep-seated tumor models and should be further tested for development into a promising therapeutic modality for cancer treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Space-Valence Priming with Subliminal and Supraliminal Words

Directory of Open Access Journals (Sweden)

Ulrich eAnsorge

2013-02-01

Full Text Available To date it is unclear whether (1 awareness-independent non-evaluative semantic processes influence affective semantics and whether (2 awareness-independent affective semantics influence non-evaluative semantic processing. In the current study, we investigated these questions with the help of subliminal (masked primes and visible targets in a space-valence across-category congruence effect. In line with (1, we found that subliminal space prime words influenced valence classification of supraliminal target words (Experiment 1: Classifications were faster with a congruent prime (e.g., the prime ‘up’ before the target ‘happy’ than with an incongruent prime (e.g., the prime ‘up’ before the target ‘sad’. In contrast to (2, no influence of subliminal valence primes on the classification of supraliminal space targets into up- and down-words was found (Experiment 2. Control conditions showed that standard masked response-priming effects were found with both subliminal prime types, and that an across-category congruence effect was also found with supraliminal valence primes and spatial target words. The final Experiment 3 confirmed that the across-category congruence effect indeed reflected priming of target categorization of a relevant meaning category. Together, the data jointly confirmed prediction (1 that awareness-independent non-evaluative semantic priming influences valence judgments.

An analytical study of photoacoustic and thermoacoustic generation efficiency towards contrast agent and film design optimization

Directory of Open Access Journals (Sweden)

Fei Gao

2017-09-01

Full Text Available Photoacoustic (PA and thermoacoustic (TA effects have been explored in many applications, such as bio-imaging, laser-induced ultrasound generator, and sensitive electromagnetic (EM wave film sensor. In this paper, we propose a compact analytical PA/TA generation model to incorporate EM, thermal and mechanical parameters, etc. From the derived analytical model, both intuitive predictions and quantitative simulations are performed. It shows that beyond the EM absorption improvement, there are many other physical parameters that deserve careful consideration when designing contrast agents or film composites, followed by simulation study. Lastly, several sets of experimental results are presented to prove the feasibility of the proposed analytical model. Overall, the proposed compact model could work as a clear guidance and predication for improved PA/TA contrast agents and film generator/sensor designs in the domain area.

Performance simulation of a spark ignited free-piston engine generator

Energy Technology Data Exchange (ETDEWEB)

Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, University of Newcastle upon Tyne, Newcastle upon Tyne, NE1 7RU (United Kingdom)

2008-10-15

Free-piston engines are under investigation by a number of research groups worldwide due to potential fuel efficiency and engine emissions advantages. The free-piston engine generator, in which a linear electric generator is fixed to the mover to produce electric power, has been proposed as an alternative prime mover for hybrid-electric vehicles. This paper investigates the performance of a spark ignited free-piston engine generator and compares it to a conventional engine using a computational fluid dynamics simulation model. The particular operating characteristics of the free-piston engine were not found to give noticeable performance advantages, and it is concluded that the main potential of this technology lies in the simplicity and flexibility of the concept. (author)

Building Numbers from Primes

Science.gov (United States)

Burkhart, Jerry

2009-01-01

Prime numbers are often described as the "building blocks" of natural numbers. This article shows how the author and his students took this idea literally by using prime factorizations to build numbers with blocks. In this activity, students explore many concepts of number theory, including the relationship between greatest common factors and…

Recognizing Plant Defense Priming.

Science.gov (United States)

Martinez-Medina, Ainhoa; Flors, Victor; Heil, Martin; Mauch-Mani, Brigitte; Pieterse, Corné M J; Pozo, Maria J; Ton, Jurriaan; van Dam, Nicole M; Conrath, Uwe

2016-10-01

Defense priming conditions diverse plant species for the superinduction of defense, often resulting in enhanced pest and disease resistance and abiotic stress tolerance. Here, we propose a guideline that might assist the plant research community in a consistent assessment of defense priming in plants. Copyright © 2016 Elsevier Ltd. All rights reserved.

The structure factor of primes

Science.gov (United States)

Zhang, G.; Martelli, F.; Torquato, S.

2018-03-01

Although the prime numbers are deterministic, they can be viewed, by some measures, as pseudo-random numbers. In this article, we numerically study the pair statistics of the primes using statistical-mechanical methods, particularly the structure factor S(k) in an interval M ≤slant p ≤slant M + L with M large, and L/M smaller than unity. We show that the structure factor of the prime-number configurations in such intervals exhibits well-defined Bragg-like peaks along with a small ‘diffuse’ contribution. This indicates that primes are appreciably more correlated and ordered than previously thought. Our numerical results definitively suggest an explicit formula for the locations and heights of the peaks. This formula predicts infinitely many peaks in any non-zero interval, similar to the behavior of quasicrystals. However, primes differ from quasicrystals in that the ratio between the location of any two predicted peaks is rational. We also show numerically that the diffuse part decays slowly as M and L increases. This suggests that the diffuse part vanishes in an appropriate infinite-system-size limit.

PrimeFaces beginner's guide

CERN Document Server

Reddy, K Siva Prasad

2013-01-01

A guide for beginner's with step-by-step instructions and an easy-to-follow approach.PrimeFaces Beginners Guide is a simple and effective guide for beginners, wanting to learn and implement PrimeFaces in their JSF-based applications. Some basic JSF and jQuery skills are required before you start working through the book.

Semantic priming without association: a meta-analytic review.

Science.gov (United States)

Lucas, M

2000-12-01

A meta-analysis of 26 studies indicated that automatic semantic priming can occur without association. Priming did not vary substantially with differences in variables that affect automatic versus strategic processing, such as time spent processing the prime and target, relationship proportion, and task (except that average effects were smaller in the naming task). Although category coordinates were investigated in the majority of studies, synonyms, antonyms, and script relations also demonstrated priming; functional relations showed greater priming, and essential and perceptual relations showed less. The average effect size for semantic priming was smaller than that for associative priming, suggesting that there is an "associative boost" from adding an associative relationship to a semantic one. The implications of these findings for the modularity thesis and for models of semantic priming are discussed.

Transport Refrigeration Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 4112

Science.gov (United States)

Alberta Advanced Education and Technology, 2012

2012-01-01

The graduate of the Transport Refrigeration Technician apprenticeship program is a certified journeyperson who will be able: (1) to diagnose repair, maintain and operate transport refrigeration equipment used to heat or cool the load as well as of diesel engines, APUs and other prime movers; (2) to use tools and equipment in order to carry out…

Strategies for steam

International Nuclear Information System (INIS)

Hennagir, T.

1996-01-01

This article is a review of worldwide developments in the steam turbine and heat recovery steam generator markets. The Far East is driving the market in HRSGs, while China is driving the market in orders placed for steam turbine prime movers. The efforts of several major suppliers are discussed, with brief technical details being provided for several projects

The Honeybee Dance-Language Controversy

Indian Academy of Sciences (India)

some sceptics who believe that the dance that the foragers do perform may have no ... is often credited with being the prime mover in making humans what they are. ... of naive workers from its colony to a newly found source of food. After decades of .... a mechanical "robot" bee that talks to the real bees through a computer ...

Priming methods in semantics and pragmatics.

Science.gov (United States)

Maldonado, Mora; Spector, Benjamin; Chemla, Emmanuel

2017-01-01

Structural priming is a powerful method to inform linguistic theories. We argue that this method extends nicely beyond syntax to theories of meaning. Priming, however, should still be seen as only one of the tools available for linguistic data collection. Specifically, because priming can occur at different, potentially conflicting levels, it cannot detect every aspect of linguistic representations.

Structural priming, action planning, and grammar.

Science.gov (United States)

MacDonald, Maryellen C; Weiss, Daniel J

2017-01-01

Structural priming is poorly understood and cannot inform accounts of grammar for two reasons. First, those who view performance as grammar + processing will always be able to attribute psycholinguistic data to processing rather than grammar. Second, structural priming may be simply an example of hysteresis effects in general action planning. If so, then priming offers no special insight into grammar.

The priming of basic combinatory responses in MEG.

Science.gov (United States)

Blanco-Elorrieta, Esti; Ferreira, Victor S; Del Prato, Paul; Pylkkänen, Liina

2018-01-01

Priming has been a powerful tool for the study of human memory and especially the memory representations relevant for language. However, although it is well established that lexical access can be primed, we do not know exactly what types of computations can be primed above the word level. This work took a neurobiological approach and assessed the ways in which the complex representation of a minimal combinatory phrase, such as red boat, can be primed, as evidenced by the spatiotemporal profiles of magnetoencephalography (MEG) signals. Specifically, we built upon recent progress on the neural signatures of phrasal composition and tested whether the brain activities implicated for the basic combination of two words could be primed. In two experiments, MEG was recorded during a picture naming task where the prime trials were designed to replicate previously reported combinatory effects and the target trials to test whether those combinatory effects could be primed. The manipulation of the primes was successful in eliciting larger activity for adjective-noun combinations than single nouns in left anterior temporal and ventromedial prefrontal cortices, replicating prior MEG studies on parallel contrasts. Priming of similarly timed activity was observed during target trials in anterior temporal cortex, but only when the prime and target shared an adjective. No priming in temporal cortex was observed for single word repetition and two control tasks showed that the priming effect was not elicited if the prime pictures were simply viewed but not named. In sum, this work provides evidence that very basic combinatory operations can be primed, with the necessity for some lexical overlap between prime and target suggesting combinatory conceptual, as opposed to syntactic processing. Both our combinatory and priming effects were early, onsetting between 100 and 150ms after picture onset and thus are likely to reflect the very earliest planning stages of a combinatory message

Social priming increases nonverbal expressive behaviors in schizophrenia.

Directory of Open Access Journals (Sweden)

Jonathan Del-Monte

Full Text Available Semantic priming tasks are classically used to influence and implicitly promote target behaviors. Recently, several studies have demonstrated that prosocial semantic priming modulated feelings of social affiliation. The main aim of this study was to determine whether inducing feelings of social affiliation using priming tasks could modulate nonverbal social behaviors in schizophrenia. We used the Scrambled Sentence Task to prime schizophrenia patients according to three priming group conditions: pro-social, non-social or anti-social. Forty-five schizophrenia patients, diagnosed according to DSM-IV-TR, were randomly assigned to one of the three priming groups of 15 participants. We evaluated nonverbal social behaviors using the Motor-Affective subscale of the Motor-Affective-Social-Scale. Results showed that schizophrenia patients with pro-social priming had significantly more nonverbal behaviors than schizophrenia patients with anti-social and non-social priming conditions. Schizophrenia patient behaviors are affected by social priming. Our results have several clinical implications for the rehabilitation of social skills impairments frequently encountered among individuals with schizophrenia.

Optical coding theory with Prime

CERN Document Server

Kwong, Wing C

2013-01-01

Although several books cover the coding theory of wireless communications and the hardware technologies and coding techniques of optical CDMA, no book has been specifically dedicated to optical coding theory-until now. Written by renowned authorities in the field, Optical Coding Theory with Prime gathers together in one volume the fundamentals and developments of optical coding theory, with a focus on families of prime codes, supplemented with several families of non-prime codes. The book also explores potential applications to coding-based optical systems and networks. Learn How to Construct

Measurement of friction coefficient for various thin films using millimeter-size movers driven by electro-static force. Seiden kudogata bisho mover wo mochiita usumaku no masatsu keisoku

Energy Technology Data Exchange (ETDEWEB)

Suzuki, M; Watanabe, S; Yoshimura, N [Akita Univ., Akita (Japan); Fujita, H [The University of Tokyo, Tokyo (Japan)

1992-12-20

Discussions were given on measurements of coefficients for static friction between different types of thin films. A small light-weight mover of a millimeter size was driven electrostatically to measure friction in a condition close to operation of a micromachine. The thin film materials were fabricated using a sol-gel process, sputtering, vacuum deposition and a CVD process. The materials include Ni, Ti, Al, SiO2, SiNx, Si wafers and glasses. The measured values for Ni-Ni, Al-Al and Ni-Al were larger by from 0.1 to 0.2 than values for bulk. The reason for this would be because of the friction generating mechanisms being different and the sample weight being lighter. Measured values for different types of thin films on silicon wafers were higher. This may be because OH groups are formed on the wafer surface causing high adhesiveness. Values for glasses are small in general. Friction coefficients for SiO2 thin films are small on the whole. However, SiO2-SiO2 showed larger values. This indicates that SiO2 is a useful material for micromechatronics, but proper selection of contacting opponents is important. 7 refs., 4 figs., 7 tabs.

Priming of antiherbivore defensive responses in plants

Institute of Scientific and Technical Information of China (English)

Jinwon Kim; Gary W.Felton

2013-01-01

Defense priming is defined as increased readiness of defense induction.A growing body of literature indicates that plants (or intact parts of a plant) are primed in anticipation of impending environmental stresses,both biotic and abiotic,and upon the following stimulus,induce defenses more quickly and strongly.For instance,some plants previously exposed to herbivore-inducible plant volatiles (HIPVs) from neighboring plants under herbivore attack show faster or stronger defense activation and enhanced insect resistance when challenged with secondary insect feeding.Research on priming of antiherbivore defense has been limited to the HIPV-mediated mechanism until recently,but significant advances were made in the past three years,including non-HIPV-mediated defense priming,epigenetic modifications as the molecular mechanism of priming,and others.It is timely to consider the advances in research on defense priming in the plantinsect interactions.

Random reward priming is task-contingent: The robustness of the 1-trial reward priming effect

Directory of Open Access Journals (Sweden)

Árni Gunnar Ásgeirsson

2014-04-01

Full Text Available Consistent financial reward of particular features influences the allocation of visual attention in many ways. More surprising are 1-trial reward priming effects on attention where reward schedules are random and reward on one trial influences attentional allocation on the next. Those findings are thought to reflect that rewarded features become more salient than unrewarded ones on the subsequent trial. Here we attempt to conceptually replicate this effect, testing its generalizability. In three versions of an analogous paradigm to the additional singleton paradigm involving singleton search for a Gabor patch of odd spatial frequency we found no evidence of reward priming, while we only partially replicate the reward priming in the exact original paradigm tested by Hickey and colleagues. The results cast doubt on the proposal that random reward enhances salience, suggested in the original papers, and highlight the need for a more nuanced account. In many other paradigms reward effects have been found to progress gradually, becoming stronger as they build up, and we argue that for robust reward priming, reward schedules need to be more consistent than in the original 1-trial reward priming paradigm.

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially

OpenAIRE

Kiefer, Markus; Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2016-01-01

Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end,...

Priming analogical reasoning with false memories.

Science.gov (United States)

Howe, Mark L; Garner, Sarah R; Threadgold, Emma; Ball, Linden J

2015-08-01

Like true memories, false memories are capable of priming answers to insight-based problems. Recent research has attempted to extend this paradigm to more advanced problem-solving tasks, including those involving verbal analogical reasoning. However, these experiments are constrained inasmuch as problem solutions could be generated via spreading activation mechanisms (much like false memories themselves) rather than using complex reasoning processes. In three experiments we examined false memory priming of complex analogical reasoning tasks in the absence of simple semantic associations. In Experiment 1, we demonstrated the robustness of false memory priming in analogical reasoning when backward associative strength among the problem terms was eliminated. In Experiments 2a and 2b, we extended these findings by demonstrating priming on newly created homonym analogies that can only be solved by inhibiting semantic associations within the analogy. Overall, the findings of the present experiments provide evidence that the efficacy of false memory priming extends to complex analogical reasoning problems.

Priming intelligent behavior: an elusive phenomenon.

Directory of Open Access Journals (Sweden)

David R Shanks

Full Text Available Can behavior be unconsciously primed via the activation of attitudes, stereotypes, or other concepts? A number of studies have suggested that such priming effects can occur, and a prominent illustration is the claim that individuals' accuracy in answering general knowledge questions can be influenced by activating intelligence-related concepts such as professor or soccer hooligan. In 9 experiments with 475 participants we employed the procedures used in these studies, as well as a number of variants of those procedures, in an attempt to obtain this intelligence priming effect. None of the experiments obtained the effect, although financial incentives did boost performance. A Bayesian analysis reveals considerable evidential support for the null hypothesis. The results conform to the pattern typically obtained in word priming experiments in which priming is very narrow in its generalization and unconscious (subliminal influences, if they occur at all, are extremely short-lived. We encourage others to explore the circumstances in which this phenomenon might be obtained.

Priming Intelligent Behavior: An Elusive Phenomenon

Science.gov (United States)

Shanks, David R.; Newell, Ben R.; Lee, Eun Hee; Balakrishnan, Divya; Ekelund, Lisa; Cenac, Zarus; Kavvadia, Fragkiski; Moore, Christopher

2013-01-01

Can behavior be unconsciously primed via the activation of attitudes, stereotypes, or other concepts? A number of studies have suggested that such priming effects can occur, and a prominent illustration is the claim that individuals' accuracy in answering general knowledge questions can be influenced by activating intelligence-related concepts such as professor or soccer hooligan. In 9 experiments with 475 participants we employed the procedures used in these studies, as well as a number of variants of those procedures, in an attempt to obtain this intelligence priming effect. None of the experiments obtained the effect, although financial incentives did boost performance. A Bayesian analysis reveals considerable evidential support for the null hypothesis. The results conform to the pattern typically obtained in word priming experiments in which priming is very narrow in its generalization and unconscious (subliminal) influences, if they occur at all, are extremely short-lived. We encourage others to explore the circumstances in which this phenomenon might be obtained. PMID:23637732

Being everything to anyone: Applicability of thermoacoustic technology in the commercial refrigeration market

Science.gov (United States)

Poese, Matthew E.; Smith, Robert W. M.; Garrett, Steven L.

2005-09-01

This talk will compare electrodynamically driven thermoacoustic refrigeration technology to some common implementations of low-lift vapor-compression technology. A rudimentary explanation of vapor-compression refrigeration will be presented along with some of the implementation problems faced by refrigeration engineers using compressor-based systems. These problems include oil management, compressor slugging, refrigerant leaks and the environmental impact of refrigerants. Recently, the method of evaluating this environmental impact has been codified to include the direct effects of the refrigerants on global warming as well as the so-called ``indirect'' warming impact of the carbon dioxide released during the generation (at the power plant) of the electrical power consumed by the refrigeration equipment. It is issues like these that generate commercial interest in an alternative refrigeration technology. However, the requirements of a candidate technology for adoption in a mature and risk-averse commercial refrigeration industry are as hard to divine as they are to meet. Also mentioned will be the state of other alternative refrigeration technologies like free-piston Stirling, thermoelectric and magnetocaloric as well as progress using vapor compression technology with alternative refrigerants like hydrocarbons and carbon dioxide.

MPQS with three large primes

NARCIS (Netherlands)

Leyland, P.; Lenstra, A.K.; Dodson, B.; Muffett, A.; Wagstaff, S.; Fieker, C.; Kohel, D.R.

2002-01-01

We report the factorization of a 135-digit integer by the triple-large-prime variation of the multiple polynomial quadratic sieve. Previous workers [6][10] had suggested that using more than two large primes would be counterproductive, because of the greatly increased number of false reports from

Shifting evaluation windows : predictable forward primes with long SOAs eliminate the impact of backward primes.

NARCIS (Netherlands)

Fockenberg, D. A. F.; Koole, S.L.; Lakens, D.; Semin, G.R.

2013-01-01

Recent work suggests that people evaluate target stimuli within short and flexible time periods called evaluation windows. Stimuli that briefly precede a target (forward primes) or briefly succeed a target (backward primes) are often included in the target's evaluation. In this article, the authors

Proceedings of the Third EPRI Phased Array Ultrasound Seminar

International Nuclear Information System (INIS)

2003-01-01

Phased array technology for ultrasonic examination is providing innovative solutions for nuclear in-service examination applications. EPRI has been a prime mover in the development and deployment of phased array ultrasound applications in the domestic nuclear market over the past decade. As part of this strategic effort, EPRI has hosted a series of seminars on phased array technology and its applications

Brushless dc motors. [applications in non-space technology

Science.gov (United States)

1975-01-01

Brushless dc motors were intensively developed and tested over several years before qualification as the prime movers for Apollo Spacecraft life support blowers, and for circulating oxygen in the lunar portable life support system. Knowledge gained through prototype development and critical testing has significantly influenced the technology employed, broadened markets and applications, and reduced the cost of present day motors.

Wheat seed enhancement by vitamin and hormonal priming

International Nuclear Information System (INIS)

Khan, M.B.; Gurchani, M.A.; Hussain, M.

2011-01-01

Seed priming has proven beneficial in many important agricultural crops. The present study was conducted to explore the role (if any) of hormonal and vitamin seed priming to improve the germination, seedling emergence, early seedling establishment, electrolyte leakage and nutrients uptake in wheat seedlings. The wheat seeds were soaked for 48 hours in aerated solution of salicylic acid, ascorbic acid, kinetin and GA3 with 20 ppm concentration of each solution, whereas untreated seeds were taken as control. Seed priming with ascorbic acid resulted in maximum final germination and emergence percentage (FGP and FEP), radical and plumule length, root and shoot length, number of secondary roots, root shoot ratio, root dry weight, shoot dry weight and seedling dry weight compared to control (untreated seeds). Minimum mean germination and emergence time (MGT and MET) was recorded in seeds primed with kinetin and GA3. While in case of biochemical attributes, seedling potassium contents were decreased by hormonal seed priming while total soluble sugars were increased by salicylic acid and ascorbic acid seed priming. Hormonal seed priming had non-significant effect on phosphorus seedling contents. Untreated (Control) seeds showed maximum electrical conductivity at 0.5, 1, 2, 6, 12 and 24 h after inbibition than primed seeds against the minimum electrical conductivity that was recorded in seeds primed with salicylic acid and ascorbic acid. In conclusion, the wheat seeds primed with 20 ppm solution of ascorbic acid may be used for wheat seed invigoration. (author)

Environmental Prime Movers for Prehistoric Colonization of Islands in Remote Oceania

Science.gov (United States)

Montenegro, Alvaro; Callaghan, Richard T.; Fitzpatrick, Scott M.

2016-04-01

The peopling of Remote Oceania was one of the last great waves of human migration in the ancient past. Beginning around 3500 BP, peoples from Island Southeast Asia began colonizing western Micronesia, and shortly thereafter ca. 3400 BP, Lapita groups began moving east from Near Oceania (e.g., the Solomons and Bismarck Archipelago) to islands in Eastern Melanesia and West Polynesia, including Vanuatu, Fiji, Tonga, and Samoa. It is remarkable that over the next 2500 years, even the most remote islands, known now to represent the distant nodes of the Polynesian triangle (New Zealand, Hawaii, and Easter Island), were eventually visited by Austronesian speakers and their descendants across this seemingly boundless ocean. One of the more enduring questions - and one that has perplexed scholars for decades - is how and when these ancient seafarers were able to develop navigational/wayfinding techniques and seafaring technologies to overcome a number of environmental challenges. This would ultimately help determine what combination of social and environmental stimuli forced or encouraged people to colonize some of the most isolated patches of land on earth. To advance our understanding of ancient Pacific colonization strategies, we integrate seafaring simulation models, ease of eastward travel estimates based on land distribution and wind pattern analysis, and new climatic datasets for precipitation in Micronesia and Polynesia to examine intra-annual variations in wind and precipitation that would have influenced travel. Combined with statistical modeling of winds and currents, we argue that: land distribution could have contributed to the pause in eastward expansion seen at about 3000 BP; simple downwind sailing and downwind sailing during eastward spells are viable navigation strategies for reaching islands to the east; seasonality of eastward winds would facilitate voyage planning and increase chances of success; knowledge of annual and interannual variability, particularly the effects of El Niño, would further increase chances of success; it is significantly easier to reach Micronesia from Maluku than from the central or southern Philippines; ENSO related interannual wind and precipitation variability could have played a role in motivating and/or permitting eastward migration into and within Micronesia.

The CEGB approach to defining the commissioning tests for prime movers

Energy Technology Data Exchange (ETDEWEB)

Horne, B. E. [CEGB, Generation Development and Construction Division, Barnett Way, Barnwood, Gloucester GL4 7RS (United Kingdom)

1986-02-15

This paper describes the CEGB approach to demonstrating during commissioning the adequacy of the reliability of the large on-site essential electrical power sources installed in the CAGR power stations. In this approach the reliability requirements of the essential electrical supplies at the power stations are defined and then the reliability requirements of the particular gas turbine and diesel generator installation derived. The paper outlines the probabilistic methods used in arriving at the specific start and run test programmes which were subsequently carried out. The results achieved in these test programmes in demonstrating that the reliability requirements were satisfied, are presented In the paper. (author)

The CEGB approach to defining the commissioning tests for prime movers

International Nuclear Information System (INIS)

Horne, B.E.

1986-01-01

This paper describes the CEGB approach to demonstrating during commissioning the adequacy of the reliability of the large on-site essential electrical power sources installed in the CAGR power stations. In this approach the reliability requirements of the essential electrical supplies at the power stations are defined and then the reliability requirements of the particular gas turbine and diesel generator installation derived. The paper outlines the probabilistic methods used in arriving at the specific start and run test programmes which were subsequently carried out. The results achieved in these test programmes in demonstrating that the reliability requirements were satisfied, are presented In the paper. (author)

Lexical priming in Alzheimer's disease and aphasia.

Science.gov (United States)

Arroyo-Anlló, Eva Maria; Beauchamps, Mireille; Ingrand, Pierre; Neau, Jean Philippe; Gil, Roger

2013-01-01

Lexical priming was examined in patients with Alzheimer's disease and in aphasic patients. Control participants were divided into young and elderly [cf. Arroyo-Anlló et al.: Eur J Cogn Psychol 2004;16:535-553]. For lexical priming, a word-stem completion task was used. Normal elderly participants had lexical priming scores that were significantly lower than those of young individuals. Analysis of covariance with age and educational level as covariates showed that the control participants, aphasic and Alzheimer patients did not differ significantly on the lexical priming task. Our results suggest that performance in the lexical priming task diminishes with physiological aging, but is not significantly affected by mild or moderate Alzheimer's disease or by fluent or non-fluent aphasia. Copyright © 2013 S. Karger AG, Basel.

The prime numbers and their distribution

CERN Document Server

Tenenbaum, Gerald

2000-01-01

One notable new direction this century in the study of primes has been the influx of ideas from probability. The goal of this book is to provide insights into the prime numbers and to describe how a sequence so tautly determined can incorporate such a striking amount of randomness. The book opens with some classic topics of number theory. It ends with a discussion of some of the outstanding conjectures in number theory. In between are an excellent chapter on the stochastic properties of primes and a walk through an elementary proof of the Prime Number Theorem. This book is suitable for anyone who has had a little number theory and some advanced calculus involving estimates. Its engaging style and invigorating point of view will make refreshing reading for advanced undergraduates through research mathematicians.

Semantic transparency affects morphological priming . . . eventually.

Science.gov (United States)

Heyer, Vera; Kornishova, Dana

2018-05-01

Semantic transparency has been in the focus of psycholinguistic research for decades, with the controversy about the time course of the application of morpho-semantic information during the processing of morphologically complex words not yet resolved. This study reports two masked priming studies with English - ness and Russian - ost' nominalisations, investigating how semantic transparency modulates native speakers' morphological priming effects at short and long stimulus onset asynchronies (SOAs). In both languages, we found increased morphological priming for nominalisations at the transparent end of the scale (e.g. paleness - pale) in comparison to items at the opaque end of the scale (e.g. business - busy) but only at longer prime durations. The present findings are in line with models that posit an initial phase of morpho-orthographic (semantically blind) decomposition.

Continued Funding for Prime Development

Science.gov (United States)

2012-04-18

PHP language with the help of CMF Drupal-6. The standard modules of the Drupal core set are developed by third parties and obtained from the...repository drupal.org. Part of the modules was modified specifically for the PrIMe portal. The PrIMe portal uses MySQL for the database technology. It is

The Effect of Fatigued External Rotator Muscles of the Shoulder on the Shoulder Position Sense

Directory of Open Access Journals (Sweden)

Naoya Iida

2011-10-01

Full Text Available This study aimed to investigate the effect of fatigue in shoulder external rotator muscles on position sense of shoulder abduction, internal rotation, and external rotation. The study included 10 healthy subjects. Shoulder position sense was measured before and after a fatigue task involving shoulder external rotator muscles. The fatigue task was performed using an isokinetic machine. To confirm the muscle fatigue, electromyography (EMG was recorded, and an integrated EMG and median power frequency (MDF during 3 sec performed target torque were calculated. After the fatigue task, the MDF of the infraspinatus muscle significantly decreased. This indicates that the infraspinatus muscle was involved in the fatigue task. In addition, the shoulder position sense of internal and external rotation significantly decreased after the fatigue task. These results suggest that the fatigue reduced the accuracy of sensory input from muscle spindles. However, no significant difference was observed in shoulder position sense of abduction before and after the fatigue task. This may be due to the fact that infraspinatus muscle did not act as prime movers in shoulder abduction. These results suggest that muscle fatigue decreased position sense during movements in which the affected muscles acted as prime movers.

Neural network-based voltage regulator for an isolated asynchronous generator supplying three-phase four-wire loads

Energy Technology Data Exchange (ETDEWEB)

Singh, Bhim; Kasal, Gaurav Kumar [Department of Electrical Engineering, Indian Institute of Technology, Delhi, Hauz-Khas, New Delhi 110016 (India)

2008-06-15

This paper deals with a neural network-based solid state voltage controller for an isolated asynchronous generator (IAG) driven by constant speed prime mover like diesel engine, bio-gas or gasoline engine and supplying three-phase four-wire loads. The proposed control scheme uses an indirect current control and a fast adaptive linear element (adaline) based neural network reference current extractor, which extracts the real positive sequence current component without any phase shift. The neutral current of the source is also compensated by using three single-phase bridge configuration of IGBT (insulated gate bipolar junction transistor) based voltage source converter (VSC) along-with single-phase transformer having self-supported dc bus. The proposed controller provides the functions as a voltage regulator, a harmonic eliminator, a neutral current compensator, and a load balancer. The proposed isolated electrical system with its controller is modeled and simulated in MATLAB along with Simulink and PSB (Power System Block set) toolboxes. The simulated results are presented to demonstrate the capability of an isolated asynchronous generating system driven by a constant speed prime mover for feeding three-phase four-wire loads. (author)

Size matters: Installed maximal unit size predicts market life cycles of electricity generation technologies and systems

International Nuclear Information System (INIS)

Li, N.

2008-01-01

The electricity generation technologies and systems are complex and change in very dynamic fashions, with a multitude of energy sources and prime movers. Since an important concept in generator design is the 'economies of scale', we discover that the installed maximal unit size (capacity) of the generators is a key 'envelope-pushing' characteristic with logistical behaviors. The logistical wavelet analysis of the max unit sizes for different fuels and prime movers, and the cumulative capacities, reveals universal quantitative features in the aggregate evolution of the power industry. We extract the transition times of the max sizes (spanning 10-90% of the saturation limits) for different technologies and systems, and discover that the max size saturation in the 90-99% range precedes the saturation of cumulative capacities of the corresponding systems in the US. While these universal laws are still empirical, they give us a simple yet elegant framework to examine the evolution of the power industry and markets in predictive, not just descriptive, terms. Such laws give us a quantitative tool to spot trends and predict future development, invaluable in planning and resource allocation based on intrinsic technology and system market life cycles

Rapid modulation of spoken word recognition by visual primes.

Science.gov (United States)

Okano, Kana; Grainger, Jonathan; Holcomb, Phillip J

2016-02-01

In a masked cross-modal priming experiment with ERP recordings, spoken Japanese words were primed with words written in one of the two syllabary scripts of Japanese. An early priming effect, peaking at around 200ms after onset of the spoken word target, was seen in left lateral electrode sites for Katakana primes, and later effects were seen for both Hiragana and Katakana primes on the N400 ERP component. The early effect is thought to reflect the efficiency with which words in Katakana script make contact with sublexical phonological representations involved in spoken language comprehension, due to the particular way this script is used by Japanese readers. This demonstrates fast-acting influences of visual primes on the processing of auditory target words, and suggests that briefly presented visual primes can influence sublexical processing of auditory target words. The later N400 priming effects, on the other hand, most likely reflect cross-modal influences on activity at the level of whole-word phonology and semantics.

Prime implicants in dynamic reliability analysis

International Nuclear Information System (INIS)

Tyrväinen, Tero

2016-01-01

This paper develops an improved definition of a prime implicant for the needs of dynamic reliability analysis. Reliability analyses often aim to identify minimal cut sets or prime implicants, which are minimal conditions that cause an undesired top event, such as a system's failure. Dynamic reliability analysis methods take the time-dependent behaviour of a system into account. This means that the state of a component can change in the analysed time frame and prime implicants can include the failure of a component at different time points. There can also be dynamic constraints on a component's behaviour. For example, a component can be non-repairable in the given time frame. If a non-repairable component needs to be failed at a certain time point to cause the top event, we consider that the condition that it is failed at the latest possible time point is minimal, and the condition in which it fails earlier non-minimal. The traditional definition of a prime implicant does not account for this type of time-related minimality. In this paper, a new definition is introduced and illustrated using a dynamic flowgraph methodology model. - Highlights: • A new definition of a prime implicant is developed for dynamic reliability analysis. • The new definition takes time-related minimality into account. • The new definition is needed in dynamic flowgraph methodology. • Results can be represented by a smaller number of prime implicants.

48 CFR 45.501 - Prime contractor alternate locations.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Prime contractor alternate... CONTRACT MANAGEMENT GOVERNMENT PROPERTY Support Government Property Administration 45.501 Prime contractor... administration from another contract administration office, for purposes of evaluating prime contractor...

Event generators for {{\\eta }}/{{{\\eta }}}^{^{\\prime} } decays at BESIII

Science.gov (United States)

Qin, Nian; Zhang, Zhen-Yu; Fang, Shuang-Shi; Zhou, Xiang; Du, Lin-Lin; Qiao, Hao-Xue

2018-01-01

The light unflavoured meson {{η }}/{{{η }}}^{\\prime } decays are valuable for testing non-perturbative quantum chromodynamics and exploring new physics beyond the Standard Model. This paper describes a series of event generators, including {{η }}/{{{η }}}^{\\prime }\\to {{γ }}{{{l}}}+{{{l}}}-, {{η }}/{{{η }}}^{\\prime }\\to {{γ }}{{{π }}}+{{{π }}}-, {{{η }}}^{\\prime }\\to {{ω }}{{{e}}}+{{{e}}}-, {{η }}\\to {{{π }}}+{{{π }}}-{{{π }}}0, {{η }}/{{{η }}}^{\\prime }\\to {{{π }}}0{{{π }}}0{{{π }}}0, {{{η }}}^{\\prime }\\to {{η }}{{π }}{{π }} and {{{η }}}^{\\prime }\\to {{{π }}}+{{{π }}}-{{{π }}}+{{{π }}}-/{{{π }}}+{{{π }}}-{{{π }}}0{{{π }}}0, which have been developed for investigating {{η }}/{{{η }}}^{\\prime } decay dynamics. For most of these generators, their usability has been validated in BESIII analyses for determining the detection efficiency, and background studies. The consistency between data and Monte Carlo shows that these generators work well in the BESIII simulation, and will also be useful for ongoing BESIII analyses and other experiments for studying {{η }}/{{{η }}}^{\\prime } physics. Supported by National Natural Science Foundation of China (NSFC) (11205117, 11575133, 11675184), the China Scholarship Council (201506275156), the Wuhan University PhD Short-time Mobility Program 2016, the Joint Funds of the NSFC and Henan Province (U1504112)

Correspondence Between “Stable” Flame Macrostructure and Thermo-acoustic Instability in Premixed Swirl-Stabilized Turbulent Combustion

KAUST Repository

Taamallah, Soufien; LaBry, Zachary A.; Shanbhogue, Santosh J.; Habib, Mohamed A. M.; Ghoniem, Ahmed F.

2014-01-01

Copyright © 2015 by ASME. In this paper, we conduct an experimental investigation to study the link between the flame macroscale structure - or flame brush spatial distribution - and thermo-acoustic instabilities, in a premixed swirl-stabilized dump combustor. We operate the combustor with premixed methane-air in the range of equivalence ratio (Φ) from the lean blowout limit to Φ = 0. 75. First, we observe the different dynamic modes in this lean range as Φ is raised. We also document the effect of Φ on the flame macrostructure. Next, we examine the correspondence between dynamic mode transitions and changes in flame macrostructure. To do so, we modify the combustor length - by downstream truncation - without changing the underlying flow upstream. Thus, the resonant frequencies of the geometry are altered allowing for decoupling the heat release rate fluctuations and the acoustic feedback. Mean flame configurations in the modified combustor and for the same range of equivalence ratio are examined, following the same experimental protocol. It is found that not only the same sequence of flame macrostructures is observed in both combustors but also that the transitions occur at a similar set of equivalence ratio. In particular, the appearance of the flame in the outside recirculation zone (ORZ) in the long combustor - which occurs simultaneously with the onset of instability at the fundamental frequency - happens at similar Φ when compared to the short combustor, but without being in latter case accompanied by a transition to thermo-acoustic instability. Then, we interrogate the flow field by analyzing the streamlines, mean, and rms velocities for the nonreacting flow and the different flame types. Finally, we focus on the transition of the flame to the ORZ in the acoustically decoupled case. Our analysis of this transition shows that it occurs gradually with an intermittent appearance of a flame in the ORZ and an increasing probability with Φ. The spectral

Correspondence Between “Stable” Flame Macrostructure and Thermo-acoustic Instability in Premixed Swirl-Stabilized Turbulent Combustion

KAUST Repository

Taamallah, Soufien

2014-12-23

Copyright © 2015 by ASME. In this paper, we conduct an experimental investigation to study the link between the flame macroscale structure - or flame brush spatial distribution - and thermo-acoustic instabilities, in a premixed swirl-stabilized dump combustor. We operate the combustor with premixed methane-air in the range of equivalence ratio (Φ) from the lean blowout limit to Φ = 0. 75. First, we observe the different dynamic modes in this lean range as Φ is raised. We also document the effect of Φ on the flame macrostructure. Next, we examine the correspondence between dynamic mode transitions and changes in flame macrostructure. To do so, we modify the combustor length - by downstream truncation - without changing the underlying flow upstream. Thus, the resonant frequencies of the geometry are altered allowing for decoupling the heat release rate fluctuations and the acoustic feedback. Mean flame configurations in the modified combustor and for the same range of equivalence ratio are examined, following the same experimental protocol. It is found that not only the same sequence of flame macrostructures is observed in both combustors but also that the transitions occur at a similar set of equivalence ratio. In particular, the appearance of the flame in the outside recirculation zone (ORZ) in the long combustor - which occurs simultaneously with the onset of instability at the fundamental frequency - happens at similar Φ when compared to the short combustor, but without being in latter case accompanied by a transition to thermo-acoustic instability. Then, we interrogate the flow field by analyzing the streamlines, mean, and rms velocities for the nonreacting flow and the different flame types. Finally, we focus on the transition of the flame to the ORZ in the acoustically decoupled case. Our analysis of this transition shows that it occurs gradually with an intermittent appearance of a flame in the ORZ and an increasing probability with Φ. The spectral

Energy Efficient Drivepower: An Overview.

Energy Technology Data Exchange (ETDEWEB)

Ula, Sadrul; Birnbaum, Larry E.; Jordan, Don

1993-05-01

This report examines energy efficiency in drivepower systems. Only systems where the prime movers are electrical motors are discussed. A systems approach is used to examine all major aspects of drivepower, including motors, controls, electrical tune-ups, mechanical efficiency, maintenance, and management. Potential annual savings to the US society of $25 to $50 billion are indicated. The report was written for readers with a semi-technical background.

The frequency attenuation effect in identity and associative priming.

Science.gov (United States)

Nievas, Francisco

2010-05-01

Three lexical decision experiments were carried out, where the masked priming paradigm is used to study the role of the frequency attenuation effect (more priming in low-frequency target words than in high-frequency target words) in repetition and associative priming, manipulating Prime Duration (PD) and Stimulus Onset Asynchrony (SOA). A new concept was introduced, Minimum Time Threshold (MTT), this is, the minimum time interval of exposure to the masked word in order to become aware of it. Results support the notion that MTT is a key to the appearance of the frequency attenuation effect when enough word processing time is allowed. Results do not support the unified explanation of masked priming and long-term priming as proposed by Bodner and Masson (2001). Moreover, information feedback from the semantic level was not the reason for the frequency attenuation effect in repetition priming.

The effects of divided attention on auditory priming.

Science.gov (United States)

Mulligan, Neil W; Duke, Marquinn; Cooper, Angela W

2007-09-01

Traditional theorizing stresses the importance of attentional state during encoding for later memory, based primarily on research with explicit memory. Recent research has begun to investigate the role of attention in implicit memory but has focused almost exclusively on priming in the visual modality. The present experiments examined the effect of divided attention on auditory implicit memory, using auditory perceptual identification, word-stem completion and word-fragment completion. Participants heard study words under full attention conditions or while simultaneously carrying out a distractor task (the divided attention condition). In Experiment 1, a distractor task with low response frequency failed to disrupt later auditory priming (but diminished explicit memory as assessed with auditory recognition). In Experiment 2, a distractor task with greater response frequency disrupted priming on all three of the auditory priming tasks as well as the explicit test. These results imply that although auditory priming is less reliant on attention than explicit memory, it is still greatly affected by at least some divided-attention manipulations. These results are consistent with research using visual priming tasks and have relevance for hypotheses regarding attention and auditory priming.

Affective priming using facial expressions modulates liking for abstract art.

Science.gov (United States)

Flexas, Albert; Rosselló, Jaume; Christensen, Julia F; Nadal, Marcos; Olivera La Rosa, Antonio; Munar, Enric

2013-01-01

We examined the influence of affective priming on the appreciation of abstract artworks using an evaluative priming task. Facial primes (showing happiness, disgust or no emotion) were presented under brief (Stimulus Onset Asynchrony, SOA = 20 ms) and extended (SOA = 300 ms) conditions. Differences in aesthetic liking for abstract paintings depending on the emotion expressed in the preceding primes provided a measure of the priming effect. The results showed that, for the extended SOA, artworks were liked more when preceded by happiness primes and less when preceded by disgust primes. Facial expressions of happiness, though not of disgust, exerted similar effects in the brief SOA condition. Subjective measures and a forced-choice task revealed no evidence of prime awareness in the suboptimal condition. Our results are congruent with findings showing that the affective transfer elicited by priming biases evaluative judgments, extending previous research to the domain of aesthetic appreciation.

Affective priming using facial expressions modulates liking for abstract art.

Directory of Open Access Journals (Sweden)

Albert Flexas

Full Text Available We examined the influence of affective priming on the appreciation of abstract artworks using an evaluative priming task. Facial primes (showing happiness, disgust or no emotion were presented under brief (Stimulus Onset Asynchrony, SOA = 20 ms and extended (SOA = 300 ms conditions. Differences in aesthetic liking for abstract paintings depending on the emotion expressed in the preceding primes provided a measure of the priming effect. The results showed that, for the extended SOA, artworks were liked more when preceded by happiness primes and less when preceded by disgust primes. Facial expressions of happiness, though not of disgust, exerted similar effects in the brief SOA condition. Subjective measures and a forced-choice task revealed no evidence of prime awareness in the suboptimal condition. Our results are congruent with findings showing that the affective transfer elicited by priming biases evaluative judgments, extending previous research to the domain of aesthetic appreciation.

Object color affects identification and repetition priming.

Science.gov (United States)

Uttl, Bob; Graf, Peter; Santacruz, Pilar

2006-10-01

We investigated the influence of color on the identification of both non-studied and studied objects. Participants studied black and white and color photos of common objects and memory was assessed with an identification test. Consistent with our meta-analysis of prior research, we found that objects were easier to identify from color than from black and white photos. We also found substantial priming in all conditions, and study-to-test changes in an object's color reduced the magnitude of priming. Color-specific priming effects were large for color-complex objects, but minimal for color-simple objects. The pattern and magnitude of priming effects was not influenced either by the extent to which an object always appears in the same color (i.e., whether a color is symptomatic of an object) or by the object's origin (natural versus fabricated). We discuss the implications of our findings for theoretical accounts of object perception and repetition priming.

Preserved semantic priming effect in alexia.

Science.gov (United States)

Mimura, M; Goodglass, H; Milberg, W

1996-09-01

BH, a left-handed patient with alexia and nonfluent aphasia, was presented with a lexical-decision task in which words and pronounceable pseudowords were preceded by semantically related or unrelated picture primes (Experiment 1). In Experiment 2, BH was given an explicit reading task using the word lists from Experiment 1. Performance on Experiment 2 disclosed severe reading deficits in both oral reading and semantic matching of the words to pictures. However, in Experiment 1, BH demonstrated a significant semantic priming effect, responding more accurately and more quickly to words preceded by related primes than by unrelated primes. The present results suggest that even in a patient with severe alexia, implicit access to semantic information can be preserved in the absence of explicit identification. The possibility of categorical gradient in implicit activation (living vs. nonliving) in BH was also discussed, which, however, needs to be clarified in the further investigation.

Un canto en movimiento: No nos moverán" en Estados Unidos, España y Chile en los siglos XIX y XX

OpenAIRE

Spener, David

2015-01-01

En este trabajo se presentan los resultados de un estudio que examina la historia de la canción " No nos moverán" y su canto en diversos contextos culturales y sociopolíticos durante el transcurso de dos siglos. Esta canción tiene su origen en las prácticas religiosas de los esclavos africanos en Estados Unidos del siglo XIX. En el siglo XX fue adoptada como himno por los movimientos sindicales y de derechos civiles estadounidenses. Posteriormente llegó a España, donde cumplió un papel en la ...

Australia's First Prime Ministerial Library: Past and Future

Science.gov (United States)

Carman-Brown, Lesley; Henderson, Kandy-Jane; Wallace, Lesley

2005-01-01

In creating Australia's first prime ministerial library, a new cultural institution was developed which blends professional practice from the fields of librarianship, education, archives, journalism and museums. The John Curtin Prime Ministerial Library honours the contribution of wartime prime minister John Curtin, works towards the advancement…

A computational approach to negative priming

Science.gov (United States)

Schrobsdorff, H.; Ihrke, M.; Kabisch, B.; Behrendt, J.; Hasselhorn, M.; Herrmann, J. Michael

2007-09-01

Priming is characterized by a sensitivity of reaction times to the sequence of stimuli in psychophysical experiments. The reduction of the reaction time observed in positive priming is well-known and experimentally understood (Scarborough et al., J. Exp. Psycholol: Hum. Percept. Perform., 3, pp. 1-17, 1977). Negative priming—the opposite effect—is experimentally less tangible (Fox, Psychonom. Bull. Rev., 2, pp. 145-173, 1995). The dependence on subtle parameter changes (such as response-stimulus interval) usually varies. The sensitivity of the negative priming effect bears great potential for applications in research in fields such as memory, selective attention, and ageing effects. We develop and analyse a computational realization, CISAM, of a recent psychological model for action decision making, the ISAM (Kabisch, PhD thesis, Friedrich-Schiller-Universitat, 2003), which is sensitive to priming conditions. With the dynamical systems approach of the CISAM, we show that a single adaptive threshold mechanism is sufficient to explain both positive and negative priming effects. This is achieved by comparing results obtained by the computational modelling with experimental data from our laboratory. The implementation provides a rich base from which testable predictions can be derived, e.g. with respect to hitherto untested stimulus combinations (e.g. single-object trials).

The effect of unimodal affective priming on dichotic emotion recognition.

Science.gov (United States)

Voyer, Daniel; Myles, Daniel

2017-11-15

The present report concerns two experiments extending to unimodal priming the cross-modal priming effects observed with auditory emotions by Harding and Voyer [(2016). Laterality effects in cross-modal affective priming. Laterality: Asymmetries of Body, Brain and Cognition, 21, 585-605]. Experiment 1 used binaural targets to establish the presence of the priming effect and Experiment 2 used dichotically presented targets to examine auditory asymmetries. In Experiment 1, 82 university students completed a task in which binaural targets consisting of one of 4 English words inflected in one of 4 emotional tones were preceded by binaural primes consisting of one of 4 Mandarin words pronounced in the same (congruent) or different (incongruent) emotional tones. Trials where the prime emotion was congruent with the target emotion showed faster responses and higher accuracy in identifying the target emotion. In Experiment 2, 60 undergraduate students participated and the target was presented dichotically instead of binaurally. Primes congruent with the left ear produced a large left ear advantage, whereas right congruent primes produced a right ear advantage. These results indicate that unimodal priming produces stronger effects than those observed under cross-modal priming. The findings suggest that priming should likely be considered a strong top-down influence on laterality effects.

Studies on thermo-acoustic parameters in binary liquid mixtures of phosphinic acid (Cyanex 272) with different diluents at temperature 303.15 K: an ultrasonic study

International Nuclear Information System (INIS)

Kamila, Susmita; Jena, Satyaban; Swain, Bipin Bihari

2005-01-01

Acoustical investigations for the binary mixtures of phosphinic acid (Cyanex 272), used as liquid-liquid extractant, have been made in various diluents such as benzene, toluene, and xylene from ultrasonic velocity and density measurements at temperature 303.15 K and atmospheric pressure. This study involves evaluation of different thermo-acoustic parameters along with the excess properties, which are interpreted in the light of molecular interaction between a polar extractant, Cyanex 272 with non-polar diluent, benzene and weakly polar diluents, toluene and xylene. The excess values are correlated using Redlich-Kister polynomial equation, and corresponding adjustable parameters are derived

Stress priming in picture naming: an SOA study.

Science.gov (United States)

Schiller, Niels O; Fikkert, Paula; Levelt, Clara C

2004-01-01

This study investigates whether or not the representation of lexical stress information can be primed during speech production. In four experiments, we attempted to prime the stress position of bisyllabic target nouns (picture names) having initial and final stress with auditory prime words having either the same or different stress as the target (e.g., WORtel-MOtor vs. koSTUUM-MOtor; capital letters indicate stressed syllables in prime-target pairs). Furthermore, half of the prime words were semantically related, the other half unrelated. Overall, picture names were not produced faster when the prime word had the same stress as the target than when the prime had different stress, i.e., there was no stress-priming effect in any experiment. This result would not be expected if stress were stored in the lexicon. However, targets with initial stress were responded to faster than final-stress targets. The reason for this effect was neither the quality of the pictures nor frequency of occurrence or voice-key characteristics. We hypothesize here that this stress effect is a genuine encoding effect, i.e., words with stress on the second syllable take longer to be encoded because their stress pattern is irregular with respect to the lexical distribution of bisyllabic stress patterns, even though it can be regular with respect to metrical stress rules in Dutch. The results of the experiments are discussed in the framework of models of phonological encoding.

Specific and non-specific match effects in negative priming.

Science.gov (United States)

Labossière, Danielle I; Leboe-McGowan, Jason P

2018-01-01

The negative priming effect occurs when withholding a response to a stimulus impairs generation of subsequent responding to a same or a related stimulus. Our goal was to use the negative priming procedure to obtain insights about the memory representations generated by ignoring vs. attending/responding to a prime stimulus. Across three experiments we observed that ignoring a prime stimulus tends to generate higher identity-independent, non-specific repetition effects, owing to an overlap in the coarse perceptual form of a prime distractor and a probe target. By contrast, attended repetition effects generate predominantly identity-specific sources of facilitation. We use these findings to advocate for using laboratory phenomena to illustrate general principles that can be of practical use to non-specialists. In the case of the negative priming procedure, we propose that the procedure provides a useful means for investigating attention/memory interactions, even if the specific cause (or causes) of negative priming effects remain unresolved. Copyright © 2017 Elsevier B.V. All rights reserved.

The impact of auditory white noise on semantic priming.

Science.gov (United States)

Angwin, Anthony J; Wilson, Wayne J; Copland, David A; Barry, Robert J; Myatt, Grace; Arnott, Wendy L

2018-04-10

It has been proposed that white noise can improve cognitive performance for some individuals, particularly those with lower attention, and that this effect may be mediated by dopaminergic circuitry. Given existing evidence that semantic priming is modulated by dopamine, this study investigated whether white noise can facilitate semantic priming. Seventy-eight adults completed an auditory semantic priming task with and without white noise, at either a short or long inter-stimulus interval (ISI). Measures of both direct and indirect semantic priming were examined. Analysis of the results revealed significant direct and indirect priming effects at each ISI in noise and silence, however noise significantly reduced the magnitude of indirect priming. Analyses of subgroups with higher versus lower attention revealed a reduction to indirect priming in noise relative to silence for participants with lower executive and orienting attention. These findings suggest that white noise focuses automatic spreading activation, which may be driven by modulation of dopaminergic circuitry. Copyright © 2018 Elsevier Inc. All rights reserved.

Bounded Gaps between Products of Special Primes

Directory of Open Access Journals (Sweden)

Ping Ngai Chung

2014-03-01

Full Text Available In their breakthrough paper in 2006, Goldston, Graham, Pintz and Yıldırım proved several results about bounded gaps between products of two distinct primes. Frank Thorne expanded on this result, proving bounded gaps in the set of square-free numbers with r prime factors for any r ≥ 2, all of which are in a given set of primes. His results yield applications to the divisibility of class numbers and the triviality of ranks of elliptic curves. In this paper, we relax the condition on the number of prime factors and prove an analogous result using a modified approach. We then revisit Thorne’s applications and give a better bound in each case.

Negative Priming in Free Recall Reconsidered

Science.gov (United States)

Hanczakowski, Maciej; Beaman, C. Philip; Jones, Dylan M.

2016-01-01

Negative priming in free recall is the finding of impaired memory performance when previously ignored auditory distracters become targets of encoding and retrieval. This negative priming has been attributed to an aftereffect of deploying inhibitory mechanisms that serve to suppress auditory distraction and minimize interference with learning and…

Novel Word Lexicalization and the Prime Lexicality Effect

Science.gov (United States)

Qiao, Xiaomei; Forster, Kenneth I.

2013-01-01

This study investigates how newly learned words are integrated into the first-language lexicon using masked priming. Two lexical decision experiments are reported, with the aim of establishing whether newly learned words behave like real words in a masked form priming experiment. If they do, they should show a prime lexicality effect (PLE), in…

Identity negative priming: a phenomenon of perception, recognition or selection?

Directory of Open Access Journals (Sweden)

Hecke Schrobsdorff

Full Text Available The present study addresses the problem whether negative priming (NP is due to information processing in perception, recognition or selection. We argue that most NP studies confound priming and perceptual similarity of prime-probe episodes and implement a color-switch paradigm in order to resolve the issue. In a series of three identity negative priming experiments with verbal naming response, we determined when NP and positive priming (PP occur during a trial. The first experiment assessed the impact of target color on priming effects. It consisted of two blocks, each with a different fixed target color. With respect to target color no differential priming effects were found. In Experiment 2 the target color was indicated by a cue for each trial. Here we resolved the confounding of perceptual similarity and priming condition. In trials with coinciding colors for prime and probe, we found priming effects similar to Experiment 1. However, trials with a target color switch showed such effects only in trials with role-reversal (distractor-to-target or target-to-distractor, whereas the positive priming (PP effect in the target-repetition trials disappeared. Finally, Experiment 3 split trial processing into two phases by presenting the trial-wise color cue only after the stimulus objects had been recognized. We found recognition in every priming condition to be faster than in control trials. We were hence led to the conclusion that PP is strongly affected by perception, in contrast to NP which emerges during selection, i.e., the two effects cannot be explained by a single mechanism.

Can False Memories Prime Problem Solutions?

Science.gov (United States)

Howe, Mark L.; Garner, Sarah R.; Dewhurst, Stephen A.; Ball, Linden J.

2010-01-01

Previous research has suggested that false memories can prime performance on related implicit and explicit memory tasks. The present research examined whether false memories can also be used to prime higher order cognitive processes, namely, insight-based problem solving. Participants were asked to solve a number of compound remote associate task…

Affective Priming in Major Depressive Disorder

Directory of Open Access Journals (Sweden)

Joelle eLeMoult

2012-10-01

Full Text Available Research on cognitive biases in depression has provided considerable evidence for the impact of emotion on cognition. Individuals with depression tend to preferentially process mood-congruent material and to show deficits in the processing of positive material leading to biases in attention, memory, and judgments. More research is needed, however, to fully understand which cognitive processes are affected. The current study further examines the impact of emotion on cognition using a priming design with facial expressions of emotion. Specifically, this study tested whether the presentation of facial expressions of emotion affects subsequent processing of affective material in participants with major depressive disorder (MDD and healthy controls (CTL. Facial expressions displaying happy, sad, angry, disgusted, or neutral expressions were presented as primes for 500ms, and participants’ speed to identify a subsequent target’s emotional expression was assessed. All participants displayed greater interference from emotional versus neutral primes, marked by slower response times to judge the emotion of the target face when it was preceded by an emotional prime. Importantly, the CTL group showed the strongest interference when happy emotional expressions served as primes whereas the MDD group failed to show this bias. These results add to a growing literature that shows that depression is associated with difficulties in the processing of positive material.

Instant PrimeFaces starter

CERN Document Server

Hlavats, Ian

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. Instant Primefaces Starter is a fast-paced, introductory guide designed to give you all the information you need to start using Primfaces, instantly.Instant PrimeFaces Starter is great for developers looking to get started quickly with PrimeFaces. It's assumed that you have some JSF experience already, as well as familiarity with other Java technologies such as CDI and JPA and an understanding of MVC principles, object-relational mapping (ORM),

Facial expression primes and implicit regulation of negative emotion.

Science.gov (United States)

Yoon, HeungSik; Kim, Shin Ah; Kim, Sang Hee

2015-06-17

An individual's responses to emotional information are influenced not only by the emotional quality of the information, but also by the context in which the information is presented. We hypothesized that facial expressions of happiness and anger would serve as primes to modulate subjective and neural responses to subsequently presented negative information. To test this hypothesis, we conducted a functional MRI study in which the brains of healthy adults were scanned while they performed an emotion-rating task. During the task, participants viewed a series of negative and neutral photos, one at a time; each photo was presented after a picture showing a face expressing a happy, angry, or neutral emotion. Brain imaging results showed that compared with neutral primes, happy facial primes increased activation during negative emotion in the dorsal anterior cingulated cortex and the right ventrolateral prefrontal cortex, which are typically implicated in conflict detection and implicit emotion control, respectively. Conversely, relative to neutral primes, angry primes activated the right middle temporal gyrus and the left supramarginal gyrus during the experience of negative emotion. Activity in the amygdala in response to negative emotion was marginally reduced after exposure to happy primes compared with angry primes. Relative to neutral primes, angry facial primes increased the subjectively experienced intensity of negative emotion. The current study results suggest that prior exposure to facial expressions of emotions modulates the subsequent experience of negative emotion by implicitly activating the emotion-regulation system.

Masked priming for the comparative evaluation of camouflage conspicuity.

Science.gov (United States)

Brunyé, Tad T; Eddy, Marianna D; Cain, Matthew S; Hepfinger, Lisa B; Rock, Kathryn

2017-07-01

Human observer test and evaluation of camouflage patterns is critical for understanding relative pattern conspicuity against a range of background scenes. However, very few validated methodologies exist for this purpose, and those that do carry several limitations. Five experiments examined whether masked priming with a dot probe could be used to reliably differentiate camouflage patterns. In each experiment, participants were primed with a camouflaged target appearing on the left or right of the screen, and then made a speeded response to a dot probe appearing on the same (congruent) or different (incongruent) side. Across experiments we parametrically varied prime duration between 35, 42, 49, 56, and 63 ms. Results demonstrated that as prime duration increased, a response time disadvantage for incongruent trials emerged with certain camouflage patterns. Interestingly, the most conspicuous patterns showed behavioral differences at a relatively brief (49 ms) prime duration, whereas behavioral differences were only found at longer prime durations for less conspicuous patterns; this overall results pattern matched that predicted by a visual salience model. Together, we demonstrate the viability of masked priming for the test and evaluation of camouflage patterns, and correlated outcomes for saliency models and primed object processing. Published by Elsevier Ltd.

Long-term repetition priming with symmetrical polygons and words.

Science.gov (United States)

Kersteen-Tucker, Z

1991-01-01

In two different tasks, subjects were asked to make lexical decisions (word or nonword) and symmetry judgments (symmetrical or nonsymmetrical) about two-dimensional polygons. In both tasks, every stimulus was repeated at one of four lags (0, 1, 4, or 8 items interposed between the first and second stimulus presentations). This paradigm, known as repetition priming, revealed comparable short-term priming (Lag 0) and long-term priming (Lags 1, 4, and 8) both for symmetrical polygons and for words. A shorter term component (Lags 0 and 1) of priming was observed for nonwords, and only very short-term priming (Lag 0) was observed for nonsymmetrical polygons. These results indicate that response facilitation accruing from repeated exposure can be observed for stimuli that have no preexisting memory representations and suggest that perceptual factors contribute to repetition-priming effects.

Experimental Investigation of Performance and Emission Characteristics of Blends of Jatropha Oil Methyl Ester and Ethanol in Light Duty Diesel Vehicle

OpenAIRE

Mr. S.K.Sinha,; Vipul Vibhanshu

2014-01-01

Diesel engine are most versatile engine which are mostly use as main prime movers in transportation , decentralized electric generation and agricultures sector. The current growth in environmental degradation and limited availability of fossil fuels has been a matter of concern throughout the world. In view of this fact it has become necessary to explore renewable alternative fuel from resources available locally, such as vegetable oils alcohol, animal fats etc. whose properti...

Evaluation of cyclic battery ageing for railway vehicle application

OpenAIRE

Sigle, Sebastian; Kaimer, Stefan; Dittus, Holger; Barai, Anup; McGordon, Andrew; Widanage, W. Dhammika

2017-01-01

Mobile transportation systems rely heavily on hydrocarbon based internal combustions engines (ICE) as the prime mover of vehicles. For rail applications electrification of the route provides an opportunity to improve efficiency and eliminate local emissions at point of use. However, route electrification is not always cost effective for secondary routes which see lower passenger volumes and less frequent trains; there is therefore an increasing interest in railway vehicles being equipped with...

Semantic Priming for Coordinate Distant Concepts in Alzheimer's Disease Patients

Science.gov (United States)

Perri, R.; Zannino, G. D.; Caltagirone, C.; Carlesimo, G. A.

2011-01-01

Semantic priming paradigms have been used to investigate semantic knowledge in patients with Alzheimer's disease (AD). While priming effects produced by prime-target pairs with associative relatedness reflect processes at both lexical and semantic levels, priming effects produced by words that are semantically related but not associated should…

Syntactic Priming.

Science.gov (United States)

Nicol, Janet L.

1996-01-01

Reviews the syntactic priming task, a paradigm involving the presentation of a phrasal or clausal context, followed by the presentation of a target item for lexical decision or naming. Notes that response times are faster for targets syntactically congruent with the preceding context than for incongruent targets. Outlines how to administer this…

A prime a day keeps calories away: The effects of supraliminal priming on food consumption and the moderating role of gender and eating restraint.

Science.gov (United States)

Minas, Randall K; Poor, Morgan; Dennis, Alan R; Bartelt, Valerie L

2016-10-01

The link between intentions and action in weight control is weaker than previously thought, so recent research has called for further investigation of ways to improve weight control that bypass conscious intentions. Priming has been shown to have effects on individual behavior in a variety of contexts by influencing subconscious cognition. This paper investigates the effects of semantic priming using healthy body image, goal-oriented words on food consumption. The moderating role of both restrained eating and gender is investigated. 161 participants were involved in an experiment using a novel version of a scrambled sentence priming game. The outcome measure was the number of kilocalories consumed, examined using a between subjects ANCOVA with priming, gender, restrained eating index, self-reported BMI, and two interaction terms (primingxgender, and primingxrestrained eating index). There was no main effect of priming but there was an interaction of priming with gender. Females consumed significantly fewer kilocalories after being exposed to priming words related to a healthy body image (i.e. "slim", "fit,") compared to females receiving the neutral prime, with a medium effect size (d = 0.58). The body image prime did not significantly affect food intake for males, nor did it have a differential effect on restrained eaters. This study shows that priming can be an effective method for influencing females to reduce food intake, regardless of whether they are restrained or unrestrained eaters. Future studies could investigate whether different priming words related to a male's healthy body image goal (i.e. "buff," "muscles," etc.) would similarly reduce food intake for males. Copyright © 2016. Published by Elsevier Ltd.

Euclidean Primes Have the Minimum Number of Primitive Roots

Czech Academy of Sciences Publication Activity Database

Křížek, Michal; Somer, L.

2008-01-01

Roč. 12, č. 1 (2008), s. 121-127 ISSN 0972-5555 R&D Projects: GA AV ČR(CZ) IAA100190803 Institutional research plan: CEZ:AV0Z10190503 Keywords : Euclidean primes * Fermat primes * Sophie Germain primes Subject RIV: BA - General Mathematics

Italy's Prime Minister visits CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

Prime alternative algebras that are nearly commutative

International Nuclear Information System (INIS)

Pchelintsev, S V

2004-01-01

We prove that by deforming the multiplication in a prime commutative alternative algebra using a C-operation we obtain a prime non-commutative alternative algebra. Under certain restrictions on non-commutative algebras this relation between algebras is reversible. Isotopes are special cases of deformations. We introduce and study a linear space generated by the Bruck C-operations. We prove that the Bruck space is generated by operations of rank 1 and 2 and that 'general' Bruck operations of rank 2 are independent in the following sense: a sum of n operations of rank 2 cannot be written as a linear combination of (n-1) operations of rank 2 and an arbitrary operation of rank 1. We describe infinite series of non-isomorphic prime non-commutative algebras of bounded degree that are deformations of a concrete prime commutative algebra

Syntactic Variance and Priming Effects in Translation

DEFF Research Database (Denmark)

Bangalore, Srinivas; Behrens, Bergljot; Carl, Michael

2016-01-01

The present work investigates the relationship between syntactic variation and priming in translation. It is based on the claim that languages share a common cognitive network of neural activity. When the source and target languages are solicited in a translation context, this shared network can...... lead to facilitation effects, so-called priming effects. We suggest that priming is a default setting in translation, a special case of language use where source and target languages are constantly co-activated. Such priming effects are not restricted to lexical elements, but do also occur...... on the syntactic level. We tested these hypotheses with translation data from the TPR database, more specifically for three language pairs (English-German, English-Danish, and English-Spanish). Our results show that response times are shorter when syntactic structures are shared. The model explains this through...

Thermal management of thermoacoustic sound projectors using a free-standing carbon nanotube aerogel sheet as a heat source.

Science.gov (United States)

Aliev, Ali E; Mayo, Nathanael K; Baughman, Ray H; Avirovik, Dragan; Priya, Shashank; Zarnetske, Michael R; Blottman, John B

2014-10-10

Carbon nanotube (CNT) aerogel sheets produce smooth-spectra sound over a wide frequency range (1-10(5) Hz) by means of thermoacoustic (TA) sound generation. Protective encapsulation of CNT sheets in inert gases between rigid vibrating plates provides resonant features for the TA sound projector and attractive performance at needed low frequencies. Energy conversion efficiencies in air of 2% and 10% underwater, which can be enhanced by further increasing the modulation temperature. Using a developed method for accurate temperature measurements for the thin aerogel CNT sheets, heat dissipation processes, failure mechanisms, and associated power densities are investigated for encapsulated multilayered CNT TA heaters and related to the thermal diffusivity distance when sheet layers are separated. Resulting thermal management methods for high applied power are discussed and deployed to construct efficient and tunable underwater sound projector for operation at relatively low frequencies, 10 Hz-10 kHz. The optimal design of these TA projectors for high-power SONAR arrays is discussed.

Thermal management of thermoacoustic sound projectors using a free-standing carbon nanotube aerogel sheet as a heat source

International Nuclear Information System (INIS)

Aliev, Ali E; Mayo, Nathanael K; Baughman, Ray H; Avirovik, Dragan; Priya, Shashank; Zarnetske, Michael R; Blottman, John B

2014-01-01

Carbon nanotube (CNT) aerogel sheets produce smooth-spectra sound over a wide frequency range (1–10 5 Hz) by means of thermoacoustic (TA) sound generation. Protective encapsulation of CNT sheets in inert gases between rigid vibrating plates provides resonant features for the TA sound projector and attractive performance at needed low frequencies. Energy conversion efficiencies in air of 2% and 10% underwater, which can be enhanced by further increasing the modulation temperature. Using a developed method for accurate temperature measurements for the thin aerogel CNT sheets, heat dissipation processes, failure mechanisms, and associated power densities are investigated for encapsulated multilayered CNT TA heaters and related to the thermal diffusivity distance when sheet layers are separated. Resulting thermal management methods for high applied power are discussed and deployed to construct efficient and tunable underwater sound projector for operation at relatively low frequencies, 10 Hz–10 kHz. The optimal design of these TA projectors for high-power SONAR arrays is discussed. (paper)

The Nature of Affective Priming in Music and Speech

NARCIS (Netherlands)

Goerlich, K.S.; Witteman, J.; Schiller, N.O.; Van Heuven, V.J.; Aleman, A.; Martens, S.

The phenomenon of affective priming has caught scientific interest for over 30 years, yet the nature of the affective priming effect remains elusive. This study investigated the underlying mechanism of cross-modal affective priming and the influence of affective incongruence in music and speech on

The priming of priming: Evidence that the N400 reflects context-dependent post-retrieval word integration in working memory.

Science.gov (United States)

Steinhauer, Karsten; Royle, Phaedra; Drury, John E; Fromont, Lauren A

2017-06-09

Which cognitive processes are reflected by the N400 in ERPs is still controversial. Various recent articles (Lau et al., 2008; Brouwer et al., 2012) have revived the idea that only lexical pre-activation processes (such as automatic spreading activation, ASA) are strongly supported, while post-lexical integrative processes are not. Challenging this view, the present ERP study replicates a behavioral study by McKoon and Ratcliff (1995) who demonstrated that a prime-target pair such as finger - hand shows stronger priming when a majority of other pairs in the list share the analogous semantic relationship (here: part-whole), even at short stimulus onset asynchronies (250ms). We created lists with four different types of semantic relationship (synonyms, part-whole, category-member, and opposites) and compared priming for pairs in a consistent list with those in an inconsistent list as well as unrelated items. Highly significant N400 reductions were found for both relatedness priming (unrelated vs. inconsistent) and relational priming (inconsistent vs. consistent). These data are taken as strong evidence that N400 priming effects are not exclusively carried by ASA-like mechanisms during lexical retrieval but also include post-lexical integration in working memory. We link the present findings to a neurocomputational model for relational reasoning (Knowlton et al., 2012) and to recent discussions of context-dependent conceptual activations (Yee and Thompson-Schill, 2016). Copyright © 2017 Elsevier B.V. All rights reserved.

Improving Consumer Decisions: The Conscious Use of Primes as Performance Enhancers

Directory of Open Access Journals (Sweden)

Leonardo Nicolao

2016-01-01

Full Text Available Through this article we examine ways through which consumers can take advantage of marketers’ priming attempts and make better decisions. Specifically, we investigate what happens when individuals are made aware of primes that may potentially improve their performance. Using an Embedded Figures Test, we demonstrate that individuals can be consciously primed into an analytic thinking mindset and perform better when they believe that the prime will enhance performance. Individuals are able to successfully ignore the prime when they believe that the prime hinders performance. Utilizing both holistic and analytic primes and by alternating the valence of the prime’s potential outcome, we are able to disentangle the conscious effects of primes from demand effects. We discuss how these findings may lead to and suggest avenues for future research.

Persistent Structural Priming from Language Comprehension to Language Production

Science.gov (United States)

Bock, Kathryn; Dell, Gary S.; Chang, Franklin; Onishi, Kristine H.

2007-01-01

To examine the relationship between syntactic processes in language comprehension and language production, we compared structural persistence from sentence primes that speakers heard to persistence from primes that speakers produced. [Bock, J. K., & Griffin, Z. M. (2000). The persistence of structural priming: transient activation or implicit…

Effects of Religious Priming Concepts on Prosocial Behavior Towards Ingroup and Outgroup.

Science.gov (United States)

Batara, Jame Bryan L; Franco, Pamela S; Quiachon, Mequia Angelo M; Sembrero, Dianelle Rose M

2016-11-01

Several studies show that there is a connection between religion and prosociality (e.g., Saroglou, 2013). To investigate whether there is a causal relationship between these two variables, a growing number of scholars employed priming religious concepts and measure its influence on prosocial behavior (e.g., Pichon, Boccato, & Saroglou, 2007). In the recent development of religious priming, Ritter and Preston (2013) argued that different primes (agent prime, spiritual/abstract prime, and institutional prime) may also have varying influence on prosocial behavior specifically helping an ingroup or an outgroup target. With this in mind, a 2 (social categorization of the target of help) by 3 (agent prime, institutional prime, spiritual prime) experiment was conducted to directly investigate this hypothesis. Results suggest that priming religious concepts especially the spiritual prime can increase prosocial behaviors. However, no significant effect was found on the social categorization which implies that Filipino participants elicit prosocial behavior regardless of the social categorization (be it ingroup or outgroup) of the target of help. The present study's findings contribute to further the literature on religious priming and its influence on prosocial behavior.

Arithmetically Related Ideal Topologies and the Infinitude of Primes ...

African Journals Online (AJOL)

algebra. Mathematics Subject Classification (1991): 11N80, 11N25, 11A41, 11T99, 13A15, 20M25 Keywords: x-ideal, topological semigroup, ideal topology, infinitude of primes, generalized primes and integers, distribution, integers, specified multiplicative constraints, primes, ideals, multiplicative ideal theory, semigroup

Alternative energy sources for non-highway transportation: technical section

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

Eighteen different alternative fuels were considered in the preliminary screening, from three basic resource bases. Coal can be used to provide 13 of the fuels; oil shale was the source for three of the fuels; and biomass provided the resource base for two fuels not provided from coal. In the case of biomass, six different fuels were considered. Nuclear power and direct solar radiation were also considered. The eight prime movers that were considered in the preliminary screening are boiler/steam turbine; open and closed cycle gas turbines; low and medium speed diesels; spark ignited and stratified charge Otto cycles; electric motor; Stirling engine; free piston; and fuel cell/electric motor. Modes of transport considered are pipeline, marine, railroad, and aircraft. Section 2 gives the overall summary and conclusions, the future outlook for each mode of transportation, and the R and D suggestions by mode of transportation. Section 3 covers the preliminary screening phase and includes a summary of the data base used. Section 4 presents the methodology used to select the fuels and prime movers for the detailed study. Sections 5 through 8 cover the detailed evaluation of the pipeline, marine, railroad, and aircraft modes of transportation. Section 9 covers the demand related issues.

Examination of energy price policies in Iran for optimal configuration of CHP and CCHP systems based on particle swarm optimization algorithm

International Nuclear Information System (INIS)

Tichi, S.G.; Ardehali, M.M.; Nazari, M.E.

2010-01-01

The current subsidized energy prices in Iran are proposed to be gradually eliminated over the next few years. The objective of this study is to examine the effects of current and future energy price policies on optimal configuration of combined heat and power (CHP) and combined cooling, heating, and power (CCHP) systems in Iran, under the conditions of selling and not-selling electricity to utility. The particle swarm optimization algorithm is used for minimizing the cost function for owning and operating various CHP and CCHP systems in an industrial dairy unit. The results show that with the estimated future unsubsidized utility prices, CHP and CCHP systems operating with reciprocating engine prime mover have total costs of 5.6 and $2.9x10 6 over useful life of 20 years, respectively, while both systems have the same capital recovery periods of 1.3 years. However, for the same prime mover and with current subsidized prices, CHP and CCHP systems require 4.9 and 5.2 years for capital recovery, respectively. It is concluded that the current energy price policies hinder the promotion of installing CHP and CCHP systems and, the policy of selling electricity to utility as well as eliminating subsidies are prerequisites to successful widespread utilization of such systems.

Conceptual Design of Fertilizer Applicator for Oil Palm on Terrace Cultivation

Science.gov (United States)

Hermawan, W.

2018-05-01

The mechanical application of fertilizer for oil palm planted on terraces is still constrained by the narrow path which is difficult to pass by a power spreader. The objective of this research was to develop a conceptual design of fertilizer applicator for oil palm planted on terraces. The design requirements were developed based on a) terrace and track conditions, b) fertilizers and fertilization conditions, c) available prime movers, and d) user needs. Five design concepts were obtained: 1) an applicator with left and right arms to distribute the fertilizer, 2) an all-terrain vehicle equipped with a manually operated fertilizer injector, 3) an applicator equipped with a hole digger, 4) an applicator equipped with a shovel, and 5) an applicator equipped with a rotary tiller. The concepts were evaluated and compared with the current power spreader. The evaluation results showed that the applicator equipped with a rotary tiller had the most advantages on the expected criteria. The final design concept uses a 110 cm wide mini crawler tractor as the prime mover and is equipped with a hopper and a spinner disk for metering and conveying the fertilizer, and a 20 cm wide rotary tiller in the front of the machine.

Religious Priming: A Meta-Analysis With a Focus on Prosociality.

Science.gov (United States)

Shariff, Azim F; Willard, Aiyana K; Andersen, Teresa; Norenzayan, Ara

2016-02-01

Priming has emerged as a valuable tool within the psychological study of religion, allowing for tests of religion's causal effect on a number of psychological outcomes, such as prosocial behavior. As the literature has grown, questions about the reliability and boundary conditions of religious priming have arisen. We use a combination of traditional effect-size analyses, p-curve analyses, and adjustments for publication bias to evaluate the robustness of four types of religious priming (Analyses 1-3), review the empirical evidence for religion's effect specifically on prosocial behavior (Analyses 4-5), and test whether religious-priming effects generalize to individuals who report little or no religiosity (Analyses 6-7). Results across 93 studies and 11,653 participants show that religious priming has robust effects across a variety of outcome measures-prosocial measures included. Religious priming does not, however, reliably affect non-religious participants-suggesting that priming depends on the cognitive activation of culturally transmitted religious beliefs. © 2015 by the Society for Personality and Social Psychology, Inc.

Promoting Physical Activity through Priming the Content of Motivation

Directory of Open Access Journals (Sweden)

Tom St Quinton

2017-09-01

Full Text Available Non-conscious processes are important in influencing the performance of a number of behaviors, such as physical activity. One way that such processes can be influenced is through priming. Despite this, approaches within health psychology have predominantly focused on reflective processes with a number of psychological theories dedicated to identifying the predictors of intention. In doing so, critical beliefs and thoughts are first identified and then altered within interventions. Such work has shown limited effectiveness, however, with a gap apparent between what one intends to do and what subsequently ensues. Although there have been attempts to bridge this gap, such as theoretical integration, recent efforts include priming implicit processes. The aim of this commentary is to demonstrate the potential effectiveness of priming non-conscious processes and to suggest that the content of motivation should also succumb to priming influences. This brief review suggests that priming one of the most influential conscious processes, that of self-efficacy, could demonstrate particular effectiveness in promoting physical activity. Thus, the main purpose of the article is to suggest that the content of implicit processes as well their more traditional conscious counterparts may provide useful intervention targets. To achieve this, the article will first introduce the role of non-conscious processes and behavioral priming. Following this, the more common reflective processes will be outlined as well as attempts at theoretical integration. Finally, the article will identify studies priming non-conscious processes and will then suggest priming self-efficacy.

Method for priming and DNA sequencing

Energy Technology Data Exchange (ETDEWEB)

Mugasimangalam, R.C.; Ulanovsky, L.E.

1997-12-01

A method is presented for improving the priming specificity of an oligonucleotide primer that is non-unique in a nucleic acid template which includes selecting a continuous stretch of several nucleotides in the template DNA where one of the four bases does not occur in the stretch. This also includes bringing the template DNA in contract with a non-unique primer partially or fully complimentary to the sequence immediately upstream of the selected sequence stretch. This results in polymerase-mediated differential extension of the primer in the presence of a subset of deoxyribonucleotide triphosphates that does not contain the base complementary to the base absent in the selected sequence stretch. These reactions occur at a temperature sufficiently low for allowing the extension of the non-unique primer. The method causes polymerase-mediated extension reactions in the presence of all four natural deoxyribonucleotide triphosphates or modifications. At this high temperature discrimination occurs against priming sites of the non-unique primer where the differential extension has not made the primer sufficiently stable to prime. However, the primer extended at the selected stretch is sufficiently stable to prime.

Auditory phonological priming in children and adults during word repetition

Science.gov (United States)

Cleary, Miranda; Schwartz, Richard G.

2004-05-01

Short-term auditory phonological priming effects involve changes in the speed with which words are processed by a listener as a function of recent exposure to other similar-sounding words. Activation of phonological/lexical representations appears to persist beyond the immediate offset of a word, influencing subsequent processing. Priming effects are commonly cited as demonstrating concurrent activation of word/phonological candidates during word identification. Phonological priming is controversial, the direction of effects (facilitating versus slowing) varying with the prime-target relationship. In adults, it has repeatedly been demonstrated, however, that hearing a prime word that rhymes with the following target word (ISI=50 ms) decreases the time necessary to initiate repetition of the target, relative to when the prime and target have no phonemic overlap. Activation of phonological representations in children has not typically been studied using this paradigm, auditory-word + picture-naming tasks being used instead. The present study employed an auditory phonological priming paradigm being developed for use with normal-hearing and hearing-impaired children. Initial results from normal-hearing adults replicate previous reports of faster naming times for targets following a rhyming prime word than for targets following a prime having no phonemes in common. Results from normal-hearing children will also be reported. [Work supported by NIH-NIDCD T32DC000039.

Effects of Religious Priming Concepts on Prosocial Behavior Towards Ingroup and Outgroup

Directory of Open Access Journals (Sweden)

Jame Bryan L. Batara

2016-11-01

Full Text Available Several studies show that there is a connection between religion and prosociality (e.g., Saroglou, 2013. To investigate whether there is a causal relationship between these two variables, a growing number of scholars employed priming religious concepts and measure its influence on prosocial behavior (e.g., Pichon, Boccato, & Saroglou, 2007. In the recent development of religious priming, Ritter and Preston (2013 argued that different primes (agent prime, spiritual/abstract prime, and institutional prime may also have varying influence on prosocial behavior specifically helping an ingroup or an outgroup target. With this in mind, a 2 (social categorization of the target of help by 3 (agent prime, institutional prime, spiritual prime experiment was conducted to directly investigate this hypothesis. Results suggest that priming religious concepts especially the spiritual prime can increase prosocial behaviors. However, no significant effect was found on the social categorization which implies that Filipino participants elicit prosocial behavior regardless of the social categorization (be it ingroup or outgroup of the target of help. The present study’s findings contribute to further the literature on religious priming and its influence on prosocial behavior.

Stochastic resolution analysis of co-prime arrays in radar

NARCIS (Netherlands)

Pribic, R; Coutiño Minguez, M.A.; Leus, G.J.T.

2016-01-01

Resolution from co-prime arrays and from a full ULA of the size equal to the virtual size of co-prime arrays is investigated. We take into account not only the resulting beam width but also the fact that fewer measurements are acquired by co-prime arrays. This fact is relevant in compressive

Associative priming in a masked perceptual identification task: evidence for automatic processes.

Science.gov (United States)

Pecher, Diane; Zeelenberg, René; Raaijmakers, Jeroen G W

2002-10-01

Two experiments investigated the influence of automatic and strategic processes on associative priming effects in a perceptual identification task in which prime-target pairs are briefly presented and masked. In this paradigm, priming is defined as a higher percentage of correctly identified targets for related pairs than for unrelated pairs. In Experiment 1, priming was obtained for mediated word pairs. This mediated priming effect was affected neither by the presence of direct associations nor by the presentation time of the primes, indicating that automatic priming effects play a role in perceptual identification. Experiment 2 showed that the priming effect was not affected by the proportion (.90 vs. .10) of related pairs if primes were presented briefly to prevent their identification. However, a large proportion effect was found when primes were presented for 1000 ms so that they were clearly visible. These results indicate that priming in a masked perceptual identification task is the result of automatic processes and is not affected by strategies. The present paradigm provides a valuable alternative to more commonly used tasks such as lexical decision.

Suggestibility and negative priming: two replication studies.

Science.gov (United States)

David, Daniel; Brown, Richard J

2002-07-01

Research suggests that inhibiting the effect of irrelevant stimuli on subsequent thought and action (cognitive inhibition) may be an important component of suggestibility. Two small correlation studies were conducted to address the relationship between different aspects of suggestibility and individual differences in cognitive inhibition, operationalized as the degree of negative priming generated by to-be-ignored stimuli in a semantic categorization task. The first study found significant positive correlations between negative priming, hypnotic suggestibility, and creative imagination; a significant negative correlation was obtained between negative priming and interrogative suggestibility, demonstrating the discriminant validity of the study results. The second study replicated the correlation between negative priming and hypnotic suggestibility, using a different suggestibility measurement procedure that assessed subjective experience and hypnotic involuntariness as well as objective responses to suggestions. These studies support the notion that the ability to engage in cognitive inhibition may be an important component of hypnotic responsivity and maybe of other forms of suggestibility.

Evaluasi Sistem Akuntansi Penjualan, Piutang, dan Penerimaan Kas pada PT Livio Furniture

OpenAIRE

Aries Wicaksono

2012-01-01

Sales functions, receivables and cash receipts, are very important within the company. Sales function is a function which becomes the prime mover in revenues and earnings yields target. Therefore, the effectiveness and efficiency in the sales process, accounts receivable, and cash receipts become very important concern for company. To assess the effectiveness and efficiency of the functions of sales, accounts receivable, and cash receipts should be evaluated. The evaluation was conducted both...

Cogeneration. Section 2: Products and services

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a directory of suppliers of products and services in the area of cogeneration. The subheadings of this directory include developers and owner operators, system packagers, manufacturers of prime movers, equipment manufacturers, instruments and controls manufacturing, consulting services, appraisal and valuation, computer services, environmental services, feasibility services, hydrology, marketing, measurements, meteorology, regulatory and licensing, research, testing, training and personnel, engineering and construction, operations and maintenance, and insurance, financial and legal services

DNA polymerase preference determines PCR priming efficiency.

Science.gov (United States)

Pan, Wenjing; Byrne-Steele, Miranda; Wang, Chunlin; Lu, Stanley; Clemmons, Scott; Zahorchak, Robert J; Han, Jian

2014-01-30

Polymerase chain reaction (PCR) is one of the most important developments in modern biotechnology. However, PCR is known to introduce biases, especially during multiplex reactions. Recent studies have implicated the DNA polymerase as the primary source of bias, particularly initiation of polymerization on the template strand. In our study, amplification from a synthetic library containing a 12 nucleotide random portion was used to provide an in-depth characterization of DNA polymerase priming bias. The synthetic library was amplified with three commercially available DNA polymerases using an anchored primer with a random 3' hexamer end. After normalization, the next generation sequencing (NGS) results of the amplified libraries were directly compared to the unamplified synthetic library. Here, high throughput sequencing was used to systematically demonstrate and characterize DNA polymerase priming bias. We demonstrate that certain sequence motifs are preferred over others as primers where the six nucleotide sequences at the 3' end of the primer, as well as the sequences four base pairs downstream of the priming site, may influence priming efficiencies. DNA polymerases in the same family from two different commercial vendors prefer similar motifs, while another commercially available enzyme from a different DNA polymerase family prefers different motifs. Furthermore, the preferred priming motifs are GC-rich. The DNA polymerase preference for certain sequence motifs was verified by amplification from single-primer templates. We incorporated the observed DNA polymerase preference into a primer-design program that guides the placement of the primer to an optimal location on the template. DNA polymerase priming bias was characterized using a synthetic library amplification system and NGS. The characterization of DNA polymerase priming bias was then utilized to guide the primer-design process and demonstrate varying amplification efficiencies among three commercially

Experimental analysis of thermo-acoustic instabilities in a generic gas turbine combustor by phase-correlated PIV, chemiluminescence, and laser Raman scattering measurements

Science.gov (United States)

Arndt, Christoph M.; Severin, Michael; Dem, Claudiu; Stöhr, Michael; Steinberg, Adam M.; Meier, Wolfgang

2015-04-01

A gas turbine model combustor for partially premixed swirl flames was equipped with an optical combustion chamber and operated with CH4 and air at atmospheric pressure. The burner consisted of two concentric nozzles for separately controlled air flows and a ring of holes 12 mm upstream of the nozzle exits for fuel injection. The flame described here had a thermal power of 25 kW, a global equivalence ratio of 0.7, and exhibited thermo-acoustic instabilities at a frequency of approximately 400 Hz. The phase-dependent variations in the flame shape and relative heat release rate were determined by OH* chemiluminescence imaging; the flow velocities by stereoscopic particle image velocimetry (PIV); and the major species concentrations, mixture fraction, and temperature by laser Raman scattering. The PIV measurements showed that the flow field performed a "pumping" mode with varying inflow velocities and extent of the inner recirculation zone, triggered by the pressure variations in the combustion chamber. The flow field oscillations were accompanied by variations in the mixture fraction in the inflow region and at the flame root, which in turn were mainly caused by the variations in the CH4 concentration. The mean phase-dependent changes in the fluxes of CH4 and N2 through cross-sectional planes of the combustion chamber at different heights above the nozzle were estimated by combining the PIV and Raman data. The results revealed a periodic variation in the CH4 flux by more than 150 % in relation to the mean value, due to the combined influence of the oscillating flow velocity, density variations, and CH4 concentration. Based on the experimental results, the feedback mechanism of the thermo-acoustic pulsations could be identified as a periodic fluctuation of the equivalence ratio and fuel mass flow together with a convective delay for the transport of fuel from the fuel injector to the flame zone. The combustor and the measured data are well suited for the validation of

Alcohol Primes, Expectancies, and the Working Self-Concept

Science.gov (United States)

Hicks, Joshua A.; Schlegel, Rebecca J.; Friedman, Ronald S.; McCarthy, Denis M.

2016-01-01

Previous research has shown that alcohol consumption can lead to momentary changes in the self-concept (e.g., Steele & Josephs, 1990). In two studies (n = 150), we examined whether the implicit activation of alcohol expectancies (i.e., sociability-related expectancies) would also lead to changes in self-perception. To test this idea, participants first completed a measure of sociability-related alcohol expectancies. In a subsequent laboratory session, participants were exposed to either alcohol-related primes (i.e., pictures or words associated with alcohol) or neutral primes. After the priming task, participants completed an ostensibly unrelated self-concept survey that contained words related to sociability (e.g., “outgoing”) and non-sociability related words (e.g., “clever”). For both studies, results revealed that sociability-related alcohol expectancies were positively associated with sociability-related self-concept ratings for participants exposed to alcohol primes, but not for participants exposed to the neutral primes. Implications for the role implicit self-concept activation may have on drinking behaviors are discussed. PMID:19769437

Visual Priming of Inverted and Rotated Objects

Science.gov (United States)

Knowlton, Barbara J.; McAuliffe, Sean P.; Coelho, Chase J.; Hummel, John E.

2009-01-01

Object images are identified more efficiently after prior exposure. Here, the authors investigated shape representations supporting object priming. The dependent measure in all experiments was the minimum exposure duration required to correctly identify an object image in a rapid serial visual presentation stream. Priming was defined as the change…

Priming in the Type I-F CRISPR-Cas system triggers strand-independent spacer acquisition, bi-directionally from the primed protospacer.

Science.gov (United States)

Richter, Corinna; Dy, Ron L; McKenzie, Rebecca E; Watson, Bridget N J; Taylor, Corinda; Chang, James T; McNeil, Matthew B; Staals, Raymond H J; Fineran, Peter C

2014-07-01

Clustered regularly interspaced short palindromic repeats (CRISPR), in combination with CRISPR associated (cas) genes, constitute CRISPR-Cas bacterial adaptive immune systems. To generate immunity, these systems acquire short sequences of nucleic acids from foreign invaders and incorporate these into their CRISPR arrays as spacers. This adaptation process is the least characterized step in CRISPR-Cas immunity. Here, we used Pectobacterium atrosepticum to investigate adaptation in Type I-F CRISPR-Cas systems. Pre-existing spacers that matched plasmids stimulated hyperactive primed acquisition and resulted in the incorporation of up to nine new spacers across all three native CRISPR arrays. Endogenous expression of the cas genes was sufficient, yet required, for priming. The new spacers inhibited conjugation and transformation, and interference was enhanced with increasing numbers of new spacers. We analyzed ∼ 350 new spacers acquired in priming events and identified a 5'-protospacer-GG-3' protospacer adjacent motif. In contrast to priming in Type I-E systems, new spacers matched either plasmid strand and a biased distribution, including clustering near the primed protospacer, suggested a bi-directional translocation model for the Cas1:Cas2-3 adaptation machinery. Taken together these results indicate priming adaptation occurs in different CRISPR-Cas systems, that it can be highly active in wild-type strains and that the underlying mechanisms vary. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

[Neural correlates of priming in vision: evidence from neuropsychology and neuroimaging].

Science.gov (United States)

Kristjánsson, Arni

2005-04-01

When we look around us, we are overall more likely to notice objects that we have recently looked at; an effect known as priming. For example, when the color or shape of a visual search target is repeated, observers find the target faster than otherwise. Here I summarize recent research undertaken to uncover the temporary changes in brain activity that accompany these priming effects. In light of the fact that priming seems to have a large effect on how attention is allocated, we investigated priming effects in a visual search task on patients suffering from the neurological disorder "hemispatial neglect" in which patients typically fail to notice display items in one of their visual hemifields. Priming of target color was relatively normal for these patients, while priming of target location seemed to require awareness of the briefly presented visual search target. An experiment with functional magnetic resonance imaging of normal observers revealed that both color and location priming had a strong modulatory influence on attentional mechanisms of the frontal and parietal cortex. Color priming was also correlated with changes in activity in visual cortex as well as color processing areas in the temporal lobe. Location priming was correlated with changes in activity near the temporo- parietal junction and lateral inferior frontal cortex, areas that have been connected with attentional capture; which ties well with our finding of deficits of location priming for the neglect patients who indeed have lesions in the temporo-parietal junction. Overall, the results confirm the tight coupling of visual attention and priming in vision, and also that the visual areas of the brain show some modulation of activity as priming develops.

The Development and Testing of a Prototype Mini-Baghouse to Control the Release of Respirable Crystalline Silica from Sand Movers

Science.gov (United States)

Alexander, Barbara M.; Esswein, Eric J.; Gressel, Michael G.; Kratzer, Jerry L.; Feng, H. Amy; King, Bradley; Miller, Arthur L.; Cauda, Emanuele

2016-01-01

Inhalation of respirable crystalline silica (RCS) is a significant risk to worker health during well completions operations (which include hydraulic fracturing) at conventional and unconventional oil and gas extraction sites. RCS is generated by pneumatic transfer of quartz-containing sand during hydraulic fracturing operations. National Institute for Occupational Safety and Health (NIOSH) researchers identified concentrations of RCS at hydraulic fracturing sites that exceed 10 times the Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) and up to 50 times the NIOSH Recommended Exposure Limit (REL). NIOSH research identified at least seven point sources of dust release at contemporary oil and gas extraction sites where RCS aerosols were generated. NIOSH researchers recommend the use of engineering controls wherever they can be implemented to limit the RCS released. A control developed to address one of the largest sources of RCS aerosol generation is the NIOSH mini-baghouse assembly, mounted on the thief hatches on top of the sand mover. This manuscript details the results of a trial of the NIOSH mini-baghouse at a sand mine in Arkansas, November 18 – 21, 2013. During the trial, area air samples were collected at 12 locations on and around a sand mover with and without the mini-baghouse control installed. Analytical results for respirable dust and RCS indicate the use of the mini-baghouse effectively reduced both respirable dust and RCS downwind of the thief hatches. Reduction of airborne respirable dust ranged from 85% to 98%; reductions in airborne RCS ranged from 79% to 99%. A bulk sample of dust collected by the baghouse assembly showed the likely presence of freshly fractured quartz, a particularly hazardous form of RCS. Planned future design enhancements will increase the performance and durability of the mini-baghouse, including an improved bag clamp mechanism and upgraded filter fabric with a modified air-to-cloth ratio

The effects of the concreteness of differently valenced words on affective priming.

Science.gov (United States)

Yao, Zhao; Wang, Zhenhong

2013-07-01

This study aimed to determine whether affective priming is influenced by the concreteness of emotional words. To address this question, we conducted three experiments using lexical decision-priming task. In Experiment 1, positive-abstract (PA) and positive-concrete (PC) words were used as primes to examine the effect of the concreteness of positive words on affective priming, and in Experiment 2, negative-abstract (NA) and negative-concrete (NC) words were used as primes to examine the effect of the concreteness of negative words on affective priming. Results showed that participants responded faster to affectively congruent-abstract trails than incongruent-abstract trails in PA prime conditions, but for PC or negative word (NC and NA) prime conditions, there were no differences between the response times of congruent trails and incongruent trails. To examine the reliability of the priming effects observed in Experiments 1 and 2, we set up a neutral condition as a baseline in Experiment 3, through which we confirmed the difference in the affective priming effect between positive and negative primes in a concrete-abstract dimension. PA words were found to have the tendency to possess more emotional load and facilitate affective association between the prime and the target. The study finding suggests that aside from arousal and valence, the concreteness of positive words also has an impact on affective priming effect. Copyright © 2013 Elsevier B.V. All rights reserved.

Oxygen transfer rate identifies priming compounds in parsley cells.

Science.gov (United States)

Schilling, Jana Viola; Schillheim, Britta; Mahr, Stefan; Reufer, Yannik; Sanjoyo, Sandi; Conrath, Uwe; Büchs, Jochen

2015-11-25

In modern agriculture, the call for an alternative crop protection strategy increases because of the desired reduction of fungicide and pesticide use and the continuously evolving resistance of pathogens and pests to agrochemicals. The direct activation of the plant immune system does not provide a promising plant protection measure because of high fitness costs. However, upon treatment with certain natural or synthetic compounds, plant cells can promote to a fitness cost-saving, primed state of enhanced defense. In the primed state, plants respond to biotic and abiotic stress with faster and stronger activation of defense, and this is often associated with immunity and abiotic stress tolerance. Until now, the identification of chemical compounds with priming-inducing activity (so-called plant activators) relied on tedious and invasive approaches, or required the late detection of secreted furanocoumarin phytoalexins in parsley cell cultures. Thus, simple, fast, straightforward, and noninvasive techniques for identifying priming-inducing compounds for plant protection are very welcome. This report demonstrates that a respiration activity-monitoring system (RAMOS) can identify compounds with defense priming-inducing activity in parsley cell suspension in culture. RAMOS relies on the quasi-continuous, noninvasive online determination of the oxygen transfer rate (OTR). Treatment of parsley culture cells with the known plant activator salicylic acid (SA), a natural plant defense signal, resulted in an OTR increase. Addition of the defense elicitor Pep13, a cell wall peptide of Phythophthora sojae, induced two distinctive OTR peaks that were higher in SA-primed cells than in unprimed cells upon Pep13 challenge. Both, the OTR increase after priming with SA and the Pep13 challenge were dose-dependent. Furthermore, there was a close correlation of a compound's activity to enhance the oxygen consumption in parsley cells and its capacity to prime Pep13-induced furanocoumarin

Measurement of Branching Fractions and Charge Asymmetries in B Meson Decays to eta(prime)K*, eta(prime)rho, and eta pi

CERN Document Server

Ford, W

2003-01-01

The present preliminary measurements of branching fractions and charge asymmetries for the B meson decays B -> eta(prime) K*, B -> eta(prime)rho, and B sup + -> eta(prime)pi sup +. The data were recorded with the BABAR detector at PEP-II and correspond to 89 x 10 sup 6 B(bar B) pairs produced in e sup + e sup - annihilation through the UPSILON(4S) resonance. They find the branching fractions BETA(B sup 0 -> eta K* sup 0) = (19.0 sub - sub 2 sub . sub 1 sup + sup 2 sup . sup 2 +- 1.3) x 10 sup - sup 6 , BETA(B sup + -> eta K* sup +) = (25.7 sub - sub 3 sub . sub 6 sup + sup 3 sup . sup 8 +- 1.8) x 10 sup - sup 6 with 90% confidence, and BETA(B sup + -> eta(prime)pi sup +) = (2.8 sub - sub 1 sub . sub 0 sup + sup 1 sup . sup 3 +- 0.3) x 10 sup - sup 6 ( eta(prime)K* sup 0) eta(prime)K* sup +) < 12 x 10 sup - sup 6. The time-integrated charge asymmetries are A sub c sub h (eta K* sup 0) = +0.03 +- 0.11 +- 0.02, A sub c sub h (eta K* sup +) = +0.15 +- 0.14 +- 0.02, and A sub c sub h (eta rho sup +) = +0.06 +-...

7 CFR 29.1166 - Primings (P Group).

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Primings (P Group). 29.1166 Section 29.1166... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.1166 Primings (P Group). This group consists of round-tipped leaves from the lowest portion of the stalk. Leaves of the P group ripen prematurely as a result...

Priming healthy eating. You can't prime all the people all of the time.

Science.gov (United States)

Forwood, Suzanna E; Ahern, Amy L; Hollands, Gareth J; Ng, Yin-Lam; Marteau, Theresa M

2015-06-01

In the context of a food purchasing environment filled with advertising and promotions, and an increased desire from policy makers to guide individuals toward choosing healthier foods, this study tests whether priming methods that use healthy food adverts to increase preference for healthier food generalize to a representative population. In two studies (Study 1 n = 143; Study 2 n = 764), participants were randomly allocated to a prime condition, where they viewed fruit and vegetable advertisements, or a control condition, with no advertisements. A subsequent forced choice task assessed preference between fruits and other sweet snacks. Additional measures included current hunger and thirst, dietary restraint, age, gender, education and self-reported weight and height. In Study 1, hunger reduced preferences for fruits (OR (95% CI) = 0.38 (0.26-0.56), p choice was unaffected by hunger or the prime. This study provides preliminary evidence that the effects of adverts on healthy eating choices depend on key individual traits (education level) and states (hunger), do not generalize to a broader population and have the potential to increase health inequalities arising from food choice. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Priming healthy eating. You can't prime all the people all of the time☆

Science.gov (United States)

Forwood, Suzanna E.; Ahern, Amy L.; Hollands, Gareth J.; Ng, Yin-Lam; Marteau, Theresa M.

2015-01-01

Objective In the context of a food purchasing environment filled with advertising and promotions, and an increased desire from policy makers to guide individuals toward choosing healthier foods, this study tests whether priming methods that use healthy food adverts to increase preference for healthier food generalize to a representative population. MethodsIn two studies (Study 1 n = 143; Study 2 n = 764), participants were randomly allocated to a prime condition, where they viewed fruit and vegetable advertisements, or a control condition, with no advertisements. A subsequent forced choice task assessed preference between fruits and other sweet snacks. Additional measures included current hunger and thirst, dietary restraint, age, gender, education and self-reported weight and height. ResultsIn Study 1, hunger reduced preferences for fruits (OR (95% CI) = 0.38 (0.26–0.56), p choice was unaffected by hunger or the prime. ConclusionThis study provides preliminary evidence that the effects of adverts on healthy eating choices depend on key individual traits (education level) and states (hunger), do not generalize to a broader population and have the potential to increase health inequalities arising from food choice. PMID:25636234

Suggestion-Induced Modulation of Semantic Priming during Functional Magnetic Resonance Imaging

Science.gov (United States)

Ulrich, Martin; Kiefer, Markus; Bongartz, Walter; Grön, Georg; Hoenig, Klaus

2015-01-01

Using functional magnetic resonance imaging during a primed visual lexical decision task, we investigated the neural and functional mechanisms underlying modulations of semantic word processing through hypnotic suggestions aimed at altering lexical processing of primes. The priming task was to discriminate between target words and pseudowords presented 200 ms after the prime word which was semantically related or unrelated to the target. In a counterbalanced study design, each participant performed the task once at normal wakefulness and once after the administration of hypnotic suggestions to perceive the prime as a meaningless symbol of a foreign language. Neural correlates of priming were defined as significantly lower activations upon semantically related compared to unrelated trials. We found significant suggestive treatment-induced reductions in neural priming, albeit irrespective of the degree of suggestibility. Neural priming was attenuated upon suggestive treatment compared with normal wakefulness in brain regions supporting automatic (fusiform gyrus) and controlled semantic processing (superior and middle temporal gyri, pre- and postcentral gyri, and supplementary motor area). Hence, suggestions reduced semantic word processing by conjointly dampening both automatic and strategic semantic processes. PMID:25923740

Suggestion-Induced Modulation of Semantic Priming during Functional Magnetic Resonance Imaging.

Directory of Open Access Journals (Sweden)

Martin Ulrich

Full Text Available Using functional magnetic resonance imaging during a primed visual lexical decision task, we investigated the neural and functional mechanisms underlying modulations of semantic word processing through hypnotic suggestions aimed at altering lexical processing of primes. The priming task was to discriminate between target words and pseudowords presented 200 ms after the prime word which was semantically related or unrelated to the target. In a counterbalanced study design, each participant performed the task once at normal wakefulness and once after the administration of hypnotic suggestions to perceive the prime as a meaningless symbol of a foreign language. Neural correlates of priming were defined as significantly lower activations upon semantically related compared to unrelated trials. We found significant suggestive treatment-induced reductions in neural priming, albeit irrespective of the degree of suggestibility. Neural priming was attenuated upon suggestive treatment compared with normal wakefulness in brain regions supporting automatic (fusiform gyrus and controlled semantic processing (superior and middle temporal gyri, pre- and postcentral gyri, and supplementary motor area. Hence, suggestions reduced semantic word processing by conjointly dampening both automatic and strategic semantic processes.

Filling in the Gaps: Priming and the Ethics of Pharmaceutical Advertising.

Science.gov (United States)

Biegler, Paul

2015-06-01

A prime is a cue that makes associated concepts, behaviors, and goals more psychologically accessible to people, influencing their responses in subsequent related environments. I build a case that Direct to Consumer Advertising of Prescription Pharmaceuticals (DTCA) operates as a prime that causes some viewers to prefer and pursue the advertised drug. Drawing on literature from social psychology I show that people subject to priming are mostly unaware of its influence and liable to misattribute the reasons for their primed actions. Misattribution typically includes heightened appraisals of the value of a primed goal. Consistent with this account, I argue that viewers primed by DTCA hold favorable, yet false beliefs about the safety and efficacy of the advertised drug. I further argue that, because those drug properties are material to viewers with the relevant illness, priming in DTCA can undermine the autonomy of their medicine choices. The threat to autonomy posed by priming in DTCA suggests it warrants attention from both regulators and the wider research community. It also adds further reason to be sceptical about the permissibility of this form of advertising.

Anterior medial prefrontal cortex implements social priming of mimicry.

Science.gov (United States)

Wang, Yin; Hamilton, Antonia F de C

2015-04-01

The neural and cognitive mechanisms by which primed constructs can impact on social behavior are poorly understood. In the present study, we used functional magnetic resonance imaging (fMRI) to explore how scrambled sentence priming can impact on mimicry behavior. Sentences involving pro/antisocial events from a first/third-person point of view were presented in short blocks, followed by a reaction-time assessment of mimicry. Behavioral results showed that both prosociality and viewpoint impact on mimicry, and fMRI analysis showed this effect is implemented by anterior medial prefrontal cortex (amPFC). We suggest that social primes may subtly modulate processing in amPFC in a manner linked to the later behavior, and that this same region also implements the top-down control of mimicry responses. This priming may be linked to processing of self-schemas in amPFC. Our findings demonstrate how social priming can be studied with fMRI, and have important implications for our understanding of the underlying mechanisms of prime-to-behavior effects as well as for current theories in social psychology. © The Author (2014). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Positional priming of pop-out is nested in visuospatial context.

Science.gov (United States)

Gokce, Ahu; Müller, Hermann J; Geyer, Thomas

2013-11-26

The present study investigated facilitatory and inhibitory positional priming using a variant of Maljkovic and Nakayama's (1996) priming of pop-out task. Here, the singleton target and the distractors could be presented in different visuospatial contexts-but identical screen locations-across trials, permitting positional priming based on individual locations to be disentangled from priming based on interitem configural relations. The results revealed both significant facilitatory priming, i.e., faster reaction times (RTs) to target presented at previous target relative to previously empty locations, and inhibitory priming, i.e., slower RTs to target at previous distractor relative to previously empty locations. However, both effects were contingent on repetitions versus changes of stimulus arrangement: While facilitation of target locations was dependent on the repetition of the exact item configuration (e.g., T-type followed by T-type stimulus arrangement), the inhibitory effect was more "tolerant," being influenced by repetitions versus changes of the item's visuospatial category (T-type followed by Z-type pattern; cf. Garner & Clement, 1963). The results suggest that facilitatory and inhibitory priming are distinct phenomena (Finke et al., 2009) and that both effects are sensitive to subtle information about the arrangement of the display items (Geyer, Zehetleitner, & Müller, 2010). The results are discussed with respect to the stage(s) of visual pop-out search that are influenced by positional priming.

Almost Fixed-Point-Free Automorphisms of Prime Power Order

Directory of Open Access Journals (Sweden)

B.A.F. Wehrfritz

2016-06-01

Full Text Available We study the effect under various rank restrictions of a group having an automorphism of prime power order whose fixed-point set is also finite of prime power order for the same prime. Generally our conclusions are that the group has a soluble normal subgroup of bounded derived length. Not surprisingly the bound gets larger as the rank restrictions get weaker.

Seed priming improves salinity tolerance of wheat varieties

International Nuclear Information System (INIS)

Jamal, Y.; Shafi, M.; Arif, M.

2011-01-01

To evaluate the response of wheat varieties to seed priming and salinity, an experiment was conducted in completely randomized design (CRD) with three replications at Institute of Biotechnology and Genetic Engineering (IBGE), KPK Agricultural University, Peshawar, Pakistan. The performance of 6 wheat varieties (Tatara-96, Ghaznavi-98, Fakhri Sarhad, Bakhtawar-92, Pirsabaq-2004 and Auqab-2000) at two seed conditions (primed with 30 mM NaCl and un primed) under four salinity levels (0, 40, 80 and 120 mM) was studied. Statistical analysis of the data revealed that salinity, seed priming and varieties had significantly (P= 0.05) affected shoot fresh weight plant/sup -1/ shoot dry weight plant/sup -1/, shoot Na/sup +/ contents (mg g/sup -1/ dry weight), shoot K/sup +/ contents (mg g/sup -1/ dry weight) and shoot K/sup +/Na/sup +/ ratio. Maximum shoot fresh weight plant/sup -1/ (7.71 g), shoot dry weight plant/sup -1/ (1.68 g), shoot K/sup +/ contents (1.39 mg g/sup -1/ dry weight) and shoot K/sup +/ Na/sup +/ratio (1.45) were recorded from Bakhtawar-92 as compared with other varieties. Highest shoot Na/sup +/ contents (1.43 mg g/sup -1/ dry weight) were recorded from Auqab-2000 when compared with other varieties. All parameters were enhanced with seed priming except shoot Na/sup +/ contents, which reduced significantly (p= 0.05) with seed priming. (author)

Behavioral Priming 2.0: Enter a Dynamical Systems Perspective

Science.gov (United States)

Krpan, Dario

2017-01-01

On a daily basis, people are exposed to numerous stimuli, ranging from colors and smells to sounds and words, that could potentially activate different cognitive constructs and influence their actions. This type of influence on human behavior is referred to as priming. Roughly two decades ago, behavioral priming was hailed as one of the core forces that shape automatic behavior. However, failures to replicate some of the representative findings in this domain soon followed, which posed the following question: “How robust are behavioral priming effects, and to what extent are they actually important in shaping people's actions?” To shed a new light on this question, I revisit behavioral priming through the prism of a dynamical systems perspective (DSP). The DSP is a scientific paradigm that has been developed through a combined effort of many different academic disciplines, ranging from mathematics and physics to biology, economics, psychology, etc., and it deals with behavior of simple and complex systems over time. In the present paper, I use conceptual and methodological tools stemming from the DSP to propose circumstances under which behavioral priming effects are likely to occur. More precisely, I outline three possible types of the influence of priming on human behavior, to which I refer as emergence, readjustment, and attractor switch, and propose experimental designs to examine them. Finally, I discuss relevant implications for behavioral priming effects and their replications. PMID:28769846

Behavioral Priming 2.0: Enter a Dynamical Systems Perspective

Directory of Open Access Journals (Sweden)

Dario Krpan

2017-07-01

Full Text Available On a daily basis, people are exposed to numerous stimuli, ranging from colors and smells to sounds and words, that could potentially activate different cognitive constructs and influence their actions. This type of influence on human behavior is referred to as priming. Roughly two decades ago, behavioral priming was hailed as one of the core forces that shape automatic behavior. However, failures to replicate some of the representative findings in this domain soon followed, which posed the following question: “How robust are behavioral priming effects, and to what extent are they actually important in shaping people's actions?” To shed a new light on this question, I revisit behavioral priming through the prism of a dynamical systems perspective (DSP. The DSP is a scientific paradigm that has been developed through a combined effort of many different academic disciplines, ranging from mathematics and physics to biology, economics, psychology, etc., and it deals with behavior of simple and complex systems over time. In the present paper, I use conceptual and methodological tools stemming from the DSP to propose circumstances under which behavioral priming effects are likely to occur. More precisely, I outline three possible types of the influence of priming on human behavior, to which I refer as emergence, readjustment, and attractor switch, and propose experimental designs to examine them. Finally, I discuss relevant implications for behavioral priming effects and their replications.

An extracellular subtilase switch for immune priming in Arabidopsis.

Directory of Open Access Journals (Sweden)

Vicente Ramírez

Full Text Available In higher eukaryotes, induced resistance associates with acquisition of a priming state of the cells for a more effective activation of innate immunity; however, the nature of the components for mounting this type of immunological memory is not well known. We identified an extracellular subtilase from Arabidopsis, SBT3.3, the overexpression of which enhances innate immune responses while the loss of function compromises them. SBT3.3 expression initiates a durable autoinduction mechanism that promotes chromatin remodeling and activates a salicylic acid(SA-dependent mechanism of priming of defense genes for amplified response. Moreover, SBT3.3 expression-sensitized plants for enhanced expression of the OXI1 kinase gene and activation of MAP kinases following pathogen attack, providing additional clues for the regulation of immune priming by SBT3.3. Conversely, in sbt3.3 mutant plants pathogen-mediated induction of SA-related defense gene expression is drastically reduced and activation of MAP kinases inhibited. Moreover, chromatin remodeling of defense-related genes normally associated with activation of an immune priming response appear inhibited in sbt3.3 plants, further indicating the importance of the extracellular SBT3.3 subtilase in the establishment of immune priming. Our results also point to an epigenetic control in the regulation of plant immunity, since SBT3.3 is up-regulated and priming activated when epigenetic control is impeded. SBT3.3 represents a new regulator of primed immunity.

Semantic priming effects of synonyms, antonyms, frame, implication and verb-object categories

Directory of Open Access Journals (Sweden)

Elsa Skënderi-Rakipllari

2017-12-01

Full Text Available Semantic priming has been a major subject of interest for psycholinguists, whose aim is to discover how lexical memory is structured and organized. The facilitation process of word retrieval through semantic priming has long been studied. The present research is aimed to reveal which semantic category has the best priming effect. Through a lexical decision task experiment we compared the reaction times of masked primed pairs and unprimed pairs. In addition, we analyzed the reaction times and priming effect of connected semantic relations: antonymy, frame, synonymy, implication and verb-object. The data collected and interpreted unveiled that the mean reaction times of primed pairs were shorter than those of unprimed pairs. As to semantic priming, the most significantly primed pairs were those of implications and verb- objects, and not those of synonymy or antonymy as it might be expected.

Micro Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center, Mississippi State University

Energy Technology Data Exchange (ETDEWEB)

Louay Chamra

2008-09-26

Initially, most micro-CHP systems will likely be designed as constant-power output or base-load systems. This implies that at some point the power requirement will not be met, or that the requirement will be exceeded. Realistically, both cases will occur within a 24-hour period. For example, in the United States, the base electrical load for the average home is approximately 2 kW while the peak electrical demand is slightly over 4 kW. If a 3 kWe micro- CHP system were installed in this situation, part of the time more energy will be provided than could be used and for a portion of the time more energy will be required than could be provided. Jalalzadeh-Azar [6] investigated this situation and presented a comparison of electrical- and thermal-load-following CHP systems. In his investigation he included in a parametric analysis addressing the influence of the subsystem efficiencies on the total primary energy consumption as well as an economic analysis of these systems. He found that an increase in the efficiencies of the on-site power generation and electrical equipment reduced the total monthly import of electricity. A methodology for calculating performance characteristics of different micro-CHP system components will be introduced in this article. Thermodynamic cycles are used to model each individual prime mover. The prime movers modeled in this article are a spark-ignition internal combustion engine (Otto cycle) and a diesel engine (Diesel cycle). Calculations for heat exchanger, absorption chiller, and boiler modeling are also presented. The individual component models are then linked together to calculate total system performance values. Performance characteristics that will be observed for each system include maximum fuel flow rate, total monthly fuel consumption, and system energy (electrical, thermal, and total) efficiencies. Also, whether or not both the required electrical and thermal loads can sufficiently be accounted for within the system

Number theory an introduction via the density of primes

CERN Document Server

Fine, Benjamin

2016-01-01

Now in its second edition, this textbook provides an introduction and overview of number theory based on the density and properties of the prime numbers. This unique approach offers both a firm background in the standard material of number theory, as well as an overview of the entire discipline. All of the essential topics are covered, such as the fundamental theorem of arithmetic, theory of congruences, quadratic reciprocity, arithmetic functions, and the distribution of primes. New in this edition are coverage of p-adic numbers, Hensel's lemma, multiple zeta-values, and elliptic curve methods in primality testing. Key topics and features include: A solid introduction to analytic number theory, including full proofs of Dirichlet's Theorem and the Prime Number Theorem Concise treatment of algebraic number theory, including a complete presentation of primes, prime factorizations in algebraic number fields, and unique factorization of ideals Discussion of the AKS algorithm, which shows that primality testing is...

Spectral statistics and scattering resonances of complex primes arrays

Science.gov (United States)

Wang, Ren; Pinheiro, Felipe A.; Dal Negro, Luca

2018-01-01

We introduce a class of aperiodic arrays of electric dipoles generated from the distribution of prime numbers in complex quadratic fields (Eisenstein and Gaussian primes) as well as quaternion primes (Hurwitz and Lifschitz primes), and study the nature of their scattering resonances using the vectorial Green's matrix method. In these systems we demonstrate several distinctive spectral properties, such as the absence of level repulsion in the strongly scattering regime, critical statistics of level spacings, and the existence of critical modes, which are extended fractal modes with long lifetimes not supported by either random or periodic systems. Moreover, we show that one can predict important physical properties, such as the existence spectral gaps, by analyzing the eigenvalue distribution of the Green's matrix of the arrays in the complex plane. Our results unveil the importance of aperiodic correlations in prime number arrays for the engineering of gapped photonic media that support far richer mode localization and spectral properties compared to usual periodic and random media.

Attentional Control and the Relatedness Proportion Effect in Semantic Priming

Science.gov (United States)

Hutchison, Keith A.

2007-01-01

In 2 experiments, participants completed both an attentional control battery (OSPAN, antisaccade, and Stroop tasks) and a modified semantic priming task. The priming task measured relatedness proportion (RP) effects within subjects, with the color of the prime indicating the probability that the to-be-named target would be related. In Experiment…

Does pizza prime coin? Perceptual priming in lexical decision and pronunciation.

NARCIS (Netherlands)

Pecher, D.; Zeelenberg, R.; Raaijmakers, J.G.W.

1998-01-01

In 6 experiments the authors investigated priming for perceptually related word pairs (i.e., words that refer to objects with the same shape such as pizza-coin), trying to replicate earlier findings by R. Schreuder et al (see record 1985-06198-001) while avoiding some of the methodological problems

Allograph priming is based on abstract letter identities: Evidence from Japanese kana.

Science.gov (United States)

Kinoshita, Sachiko; Schubert, Teresa; Verdonschot, Rinus G

2018-04-23

It is well-established that allographs like the uppercase and lowercase forms of the Roman alphabet (e.g., a and A) map onto the same "abstract letter identity," orthographic representations that are independent of the visual form. Consistent with this, in the allograph match task ("Are 'a' and 'A' the same letter?"), priming by a masked letter prime is equally robust for visually dissimilar prime-target pairs (e.g., d and D) and similar pairs (e.g., c and C). However, in principle this pattern of priming is also consistent with the possibility that allograph priming is purely phonological, based on the letter name. Because different allographic forms of the same letter, by definition, share a letter name, it is impossible to rule out this possibility a priori. In the present study, we investigated the influence of shared letter names by taking advantage of the fact that Japanese is written in two distinct writing systems, syllabic kana-that has two parallel forms, hiragana and katakana-and logographic kanji. Using the allograph match task, we tested whether a kanji prime with the same pronunciation as the target kana (e.g., - い, both pronounced /i/) produces the same amount of priming as a kana prime in the opposite kana form (e.g., イ- い). We found that the kana primes produced substantially greater priming than the phonologically identical kanji prime, which we take as evidence that allograph priming is based on abstract kana identity, not purely phonology. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Academic Procrastination on Worker Students

OpenAIRE

Muzaqi, Sugito; Arumsari, Andini Dwi

2017-01-01

Academic procrastination is to delay the work in the academic field. Academic procrastination occurs because students who work less able to divide his time well, between work and college. Students who work doing academic procrastination because it is less able to regulate themselves. Self-regulation is the ability to control their own behavior and one of the prime movers of the human personality. In the process of self-regulation, academic procrastination students who need to understand the i...

Perancangan Website Departemen Kependudukan Dan Biostatistika, Fakultas Kesehatan Masyarakat Universitas Sumatera Utara

OpenAIRE

Nasution, Ari Fakhri

2015-01-01

The change of information through the internet become more popular lately. To an educational institution, like Department of Population and Biostatistics, it is such a challenge. Moreover, Department of Population and Biostatistics is one prime-movers of Faculty of Public Health. Educational institution may use the most effective and efficient way to communicate as a part of their education service. Website’s designing aims to make a change of information on Department of Population and Biost...

Forecasting the price of gold: An error correction approach

Directory of Open Access Journals (Sweden)

Kausik Gangopadhyay

2016-03-01

Full Text Available Gold prices in the Indian market may be influenced by a multitude of factors such as the value of gold in investment decisions, as an inflation hedge, and in consumption motives. We develop a model to explain and forecast gold prices in India, using a vector error correction model. We identify investment decision and inflation hedge as prime movers of the data. We also present out-of-sample forecasts of our model and the related properties.

Influence of Individual and Group Priming on Medical Students

OpenAIRE

McGeown, Helen Rosemary

2009-01-01

This study investigated the impact of information on level of prototypicality of the ingroup ‘medical students’, comparing self-esteem effects for those primed as individuals with self-esteem effects for those primed as group members. Indication of prototypicality was given by false feedback on purported individual levels of empathy, an important group norm for medical students. As well as priming type having interactive effects with prototypicality information, it was hypothesized that initi...

Positions priming in briefly presented search arrays

DEFF Research Database (Denmark)

Asgeirsson, Arni Gunnar; Kristjánsson, Árni; Kyllingsbæk, Søren

2011-01-01

Repetition priming in visual search has been a topic of extensive research since Maljkovic & Nakayama [1994, Memory & Cognition, 22, 657-672] presented the first detailed studies of such effects. Their results showed large reductions in reaction times when target color was repeated on consecutive...... the targets are oddly colored alphanumeric characters. The effects arise at very low exposure durations and benefit accuracy at all exposure durations towards the subjects’ ceiling. We conclude that temporally constricted experimental conditions can add to our understanding priming in visual search...... pop-out search trials. Such repetition effects have since been generalized to a multitude of target attributes. Priming has primarily been investigated using self-terminating visual search paradigms, comparing differences in response times. Response accuracy has predominantly served as a control...

Emotion potentiates response activation and inhibition in masked priming.

Science.gov (United States)

Bocanegra, Bruno R; Zeelenberg, René

2012-01-01

Previous studies have shown that emotion can have 2-fold effects on perception. At the object-level, emotional stimuli benefit from a stimulus-specific boost in visual attention at the relative expense of competing stimuli. At the visual feature-level, recent findings indicate that emotion may inhibit the processing of small visual details and facilitate the processing of coarse visual features. In the present study, we investigated whether emotion can boost the activation and inhibition of automatic motor responses that are generated prior to overt perception. To investigate this, we tested whether an emotional cue affects covert motor responses in a masked priming task. We used a masked priming paradigm in which participants responded to target arrows that were preceded by invisible congruent or incongruent prime arrows. In the standard paradigm, participants react faster, and commit fewer errors responding to the directionality of target arrows, when they are preceded by congruent vs. incongruent masked prime arrows (positive congruency effect, PCE). However, as prime-target SOAs increase, this effect reverses (negative congruency effect, NCE). These findings have been explained as evidence for an initial activation and a subsequent inhibition of a partial response elicited by the masked prime arrow. Our results show that the presentation of fearful face cues, compared to neutral face cues, increased the size of both the PCE and NCE, despite the fact that the primes were invisible. This is the first demonstration that emotion prepares an individual's visuomotor system for automatic activation and inhibition of motor responses in the absence of visual awareness.

Prime Slaughter

DEFF Research Database (Denmark)

Valente, Andrea; Marchetti, Emanuela

2011-01-01

of primality and factorization into playful interactions, addressed to primary and early secondary school children. Taking into account individual needs expressed by children regarding play, during a participatory design processes aimed at enhancing learning in museums, Prime Slaughter allows for multiple...... forms of play and their integration. A simple working prototype has already been developed; it will be tested and re-designed through participatory workshops, involving a group of children in our target group....

Color coherent effects in (e,e{prime}N) and (e,e{prime}N,N(h)) processes at CEBAF

Energy Technology Data Exchange (ETDEWEB)

Frankfurt, L.L.; Sargsyan, M.M. [Tel Aviv Univ. (Israel); Strikman, M.I. [Pennsylvania State Univ., University Park, PA (United States)]|[St. Petersburg Nuclear Physics Inst. (Russian Federation)

1994-04-01

The options for investigating color coherent effects and competing nuclear effects of nucleon-nucleon correlations in nuclei, nuclear shell effects in (e, e{prime}N) and (e, e{prime}NN(h)) reactions are considered. They argue that extension of CEBAF energies to reach Q{sup 2} = 10 GeV{sup 2} will allow systematical investigations of color coherent effects in nonperturbative regime of QCD and their interplay with nuclear effects.

STEP--a System for Teaching Experimental Psychology using E-Prime.

Science.gov (United States)

MacWhinney, B; St James, J; Schunn, C; Li, P; Schneider, W

2001-05-01

Students in psychology need to learn to design and analyze their own experiments. However, software that allows students to build experiments on their own has been limited in a variety of ways. The shipping of the first full release of the E-Prime system later this year will open up a new opportunity for addressing this problem. Because E-Prime promises to become the standard for building experiments in psychology, it is now possible to construct a Web-based resource that uses E-Prime as the delivery engine for a wide variety of instructional materials. This new system, funded by the National Science Foundation, is called STEP (System for the Teaching of Experimental Psychology). The goal of the STEP Project is to provide instructional materials that will facilitate the use of E-Prime in various learning contexts. We are now compiling a large set of classic experiments implemented in E-Prime and available over the Internet from http://step.psy.cmu.edu. The Web site also distributes instructional materials for building courses in experimental psychology based on E-Prime.

Prime Minister of Pakistan visits CERN

CERN Multimedia

Anaïs Schaeffer

2016-01-01

On Saturday, 23 January 2016, CERN welcomed Mr Muhammad Nawaz Sharif, Prime Minister of Pakistan.   From left to right: Minister of Finance Mr Mohammad Ishaq Dar, Prime Minister of the Islamic Republic of Pakistan, Muhammad Nawaz Sharif, CERN Director-General Fabiola Gianotti and CMS national contact physicist Hafeez Hoorani. Mr Muhammad Nawaz Sharif arrived at Point 5 in Cessy, where he was welcomed onto French soil by the sous-préfet of Cessy, Stéphane Donnot, and, representing CERN, Director-General Fabiola Gianotti, Directors Eckhard Elsen and Charlotte Warakaulle, and Rüdiger Voss, the adviser for relations with Pakistan. It was the first visit by a head of government of Pakistan since the country became CERN's latest Associate Member State in July 2015. The Prime Minister then had the opportunity to visit the CMS underground experimental area accompanied by the CMS Spokesperson, Tiziano Camporesi, and the CMS collaboration’...

PrimeFaces blueprints

CERN Document Server

Jonna, Sudheer

2014-01-01

If you are a Java developer with experience of frontend UI development, and want to take the plunge to develop stunning UI applications with the most popular JSF framework, PrimeFaces, then this book is for you. For those with entrepreneurial aspirations, this book will provide valuable insights into how to utilize successful business models.

Neural correlates of cross-domain affective priming.

Science.gov (United States)

Zhang, Qin; Li, Xiaohua; Gold, Brian T; Jiang, Yang

2010-05-06

The affective priming effect has mostly been studied using reaction time (RT) measures; however, the neural bases of affective priming are not well established. To understand the neural correlates of cross-domain emotional stimuli presented rapidly, we obtained event-related potential (ERP) measures during an affective priming task using short SOA (stimulus onset asynchrony) conditions. Two sets of 480 picture-word pairs were presented at SOAs of either 150ms or 250ms between prime and target stimuli. Participants decided whether the valence of each target word was pleasant or unpleasant. Behavioral results from both SOA conditions were consistent with previous reports of affective priming, with longer RTs for incongruent than congruent pairs at SOAs of 150ms (771 vs. 738ms) and 250ms (765 vs. 720ms). ERP results revealed that the N400 effect (associated with incongruent pairs in affective processing) occurred at anterior scalp regions at an SOA of 150ms, and this effect was only observed for negative target words across the scalp at an SOA of 250ms. In contrast, late positive potentials (LPPs) (associated with attentional resource allocation) occurred across the scalp at an SOA of 250ms. LPPs were only observed for positive target words at posterior parts of the brain at an SOA of 150ms. Our finding of ERP signatures at very short SOAs provides the first neural evidence that affective pictures can exert an automatic influence on the evaluation of affective target words. Copyright 2010 Elsevier B.V. All rights reserved.

The set of prime numbers: Multiscale analysis and numeric accelerators

International Nuclear Information System (INIS)

Iovane, Gerardo

2009-01-01

In this work, we show that the prime numbers follow a multiscale distribution. Indeed they can be classified thanks to tree structures, which are expressed in terms of two maximal subsets of N and using multilayer selection rules, acting on these sets of prime candidates. Consequently, the prime numbers follow a specific deterministic rules. Indeed, a numeric accelerator for generating primes can be realized in terms of the above mentioned specific rules. From the comparison with the Fibonacci numbers a beautiful harmony comes in terms of the Golden Mean which is relevant to high energy physics and E-Infinity theory too.

Ovation Prime Real-Time

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Ovation Prime Real-Time (OPRT) product is a real-time forecast and nowcast model of auroral power and is an operational implementation of the work by Newell et...

Priming of disability and elderly stereotype in motor performance: similar or specific effects?

Science.gov (United States)

Ginsberg, Frederik; Rohmer, Odile; Louvet, Eva

2012-04-01

In three experimental studies, the effects of priming participants with the disability stereotype were investigated with respect to their subsequent motor performance. Also explored were effects of activating two similar stereotypes, persons with a disability and elderly people. In Study 1, participants were primed with the disability stereotype versus with a neutral prime, and then asked to perform on a motor coordination task. In Studies 2 and 3, a third condition was introduced: priming participants with the elderly stereotype. Results indicated that priming participants with the disability stereotype altered their motor performance: they showed decreased manual dexterity and performed slower than the non-primed participants. Priming with the elderly stereotype decreased only performance speed. These findings underline that prime-to-behavior effects may depend on activation of specific stereotype content.

Target Categorization with Primes that Vary in Both Congruency and Sense Modality

Directory of Open Access Journals (Sweden)

Kathryn eWeatherford

2015-01-01

Full Text Available In two experiments we examined conceptual priming within and across sense modalities by varying the modality (picture and environmental sounds and the category congruency of prime-target pairs. Both experiments used a repetition priming paradigm, but Experiment 1 studied priming effects with a task that required a superordinate categorization response (man-made or natural, while Experiment 2 used a lower-level category response (musical instruments or animal: one that was more closely associated with the basic level of the semantic network. Results from Experiment 1 showed a strong effect of target modality and two distinct patterns of conceptual priming effects with picture and environmental sound targets. However, no priming advantage was found when congruent and incongruent primes were compared. Results from Experiment 2, found congruency effects that were specific to environmental sound targets when preceded by picture primes. The findings provide support for the intermodal event file and multisensory framework, and suggest that auditory and visual features about a single item in a conceptual category may be more tightly connected than two different items from the same category.

The gas turbine: Present technology and future developments

International Nuclear Information System (INIS)

Minghetti, E.

1997-03-01

The gas turbine is the most widely used prime mover all over the world for either power generation or mechanical drive applications. The above fact is due to the recent great improvements that have been done especially in terms of efficiency, availability and reliability. The future for gas turbine technological development looks very promising. In fact, although tremendous growth has already taken place, there is still the potential for dramatic improvements in performance. Compared with the competitive prime movers (conventional steam power plants and reciprocating piston engines) the gas turbine technology is younger and still following a strong growth curve. The coming decades will witness the continued increasing in turbine inlet temperature, the development of new materials and refrigeration systems and the commercialization of inter cooled system and steam cooled turbines. With the very soon introduction of the G and H technology, expected single and combined cycle efficiencies for heavy duty machines are respectively 40% and 60%, while maintaining 'single digit' levels in pollutant emissions. In this report are given wide information on gas turbine present technology (Thermodynamics, features, design, performances, emission control, applications) and are discussed the main lines for the future developments. Finally are presented the research and technological development activities on gas turbine of Italian National Agency for new Technology Energy and the Environment Energy Department

Analysis of Engine Propeller Matching of DC Motor as a Main Propulsion

Directory of Open Access Journals (Sweden)

Eddy Setyo Koenhardono

2017-12-01

Full Text Available The development of ship always searches through the most benefits system for reducing costs of propulsion system without increase pollution. Diesel propulsion system or also known as conventional propulsion system is efficient but requires high operating costs and increase high level of marine pollution. Electrical propulsion system is using electric motors as the prime mover of the propeller. There are 2 types of electric motors that will be used for research of electric propulsion system, there are; DC motors and three-phases induction motor. As the use of DC motor as a prime mover for this electrical propulsion system, this study determines the characteristic between voltage terminal with torque and also field current with torque. It results that torque produced by the DC motor is in the same magnitude with the speed (RPM. The higher the speed have shaped the value of the torque. The input and terminal voltages adjusts all variables and results. In this study, different field voltage creates different pattern of motor envelope. Its manner to propeller curve occurs total different results. With field voltage of 50 V, the ranges of motor envelope immoveable in the point of 150% of present speed and 160%. While field voltage of 60 V serves larger ranges of motor envelope which possible to reach further than 50 V curve.

The gas turbine: Present technology and future developments; La turbina a gas: Tecnologie attuali e gli sviluppi futuri

Energy Technology Data Exchange (ETDEWEB)

Minghetti, E [ENEA, Centro Ricerche Casaccia, Rome (Italy)

1997-03-01

The gas turbine is the most widely used prime mover all over the world for either power generation or mechanical drive applications. The above fact is due to the recent great improvements that have been done especially in terms of efficiency, availability and reliability. The future for gas turbine technological development looks very promising. In fact, although tremendous growth has already taken place, there is still the potential for dramatic improvements in performance. Compared with the competitive prime movers (conventional steam power plants and reciprocating piston engines) the gas turbine technology is younger and still following a strong growth curve. The coming decades will witness the continued increasing in turbine inlet temperature, the development of new materials and refrigeration systems and the commercialization of inter cooled system and steam cooled turbines. With the very soon introduction of the {sup G }and {sup H }technology, expected single and combined cycle efficiencies for heavy duty machines are respectively 40% and 60%, while maintaining single digit levels in pollutant emissions. In this report are given wide information on gas turbine present technology (Thermodynamics, features, design, performances, emission control, applications) and are discussed the main lines for the future developments. Finally are presented the research and technological development activities on gas turbine of Italian National Agency for new Technology Energy and the Environment Energy Department.

Colorimetry and prime colours--a theorem.

Science.gov (United States)

Hornaes, Hans Petter; Wold, Jan Henrik; Farup, Ivar

2005-08-01

Human colour vision is the result of a complex process involving topics ranging from physics of light to perception. Whereas the diversity of light entering the eye in principle span an infinite-dimensional vector space in terms of the spectral power distributions, the space of human colour perceptions is three dimensional. One important consequence of this is that a variety of colours can be visually matched by a mixture of only three adequately chosen reference lights. It has been observed that there exists one particular set of monochromatic reference lights that, according to a certain definition, is optimal for producing colour matches. These reference lights are commonly denoted prime colours. In the present paper, we intend to rigorously show that the existence of prime colours is not particular to the human visual system as sometimes stated, but rather an algebraic consequence of the manner in which a kind of colorimetric functions called colour-matching functions are defined and transformed. The solution is based on maximisation of a determinant determining the gamut size of the colour space spanned by the prime colours. Cramer's rule for solving a set of linear equations is an essential part of the proof. By means of examples, it is shown that mathematically the optimal set of reference lights is not unique in general, and that the existence of a maximum determinant is not a necessary condition for the existence of prime colours.

Making sense of the Sense Model: translation priming with Japanese-English bilinguals

OpenAIRE

Allen, David; Conklin, Kathy; Van Heuven, Walter J.B.

2015-01-01

Many studies have reported that first language (L1) translation primes speed responses to second language (L2) targets, whereas L2 translation primes generally do not speed up responses to L1 targets in lexical decision. According to the Sense Model (Finkbeiner, Forster, Nicol & Nakamura, 2004) this asymmetry is due to the proportion of senses activated by the prime. Because L2 primes activate only a subset of the L1 translations senses, priming is not observed. In this study we test the pred...

Withania somnifera Root Extract Enhances Chemotherapy through 'Priming'.

Directory of Open Access Journals (Sweden)

Aine Brigette Henley

Full Text Available Withania somnifera extracts are known for their anti-cancerous, anti-inflammatory and antioxidative properties. One of their mechanisms of actions is to modulate mitochondrial function through increasing oxidative stress. Recently 'priming' has been suggested as a potential mechanism for enhancing cancer cell death. In this study we demonstrate that 'priming', in HT-29 colon cells, with W. somnifera root extract increased the potency of the chemotherapeutic agent cisplatin. We have also showed the W. somnifera root extract enhanced mitochondrial dysfunction and that the underlying mechanism of 'priming' was selectively through increased ROS. Moreover, we showed that this effect was not seen in non-cancerous cells.

CROSS-TOLERANCE MECHANISM INDUCTION IN MELON SEEDS BY PRIMING PRIOR DRYING

Directory of Open Access Journals (Sweden)

Jean Marcel Sousa Lira

2015-04-01

Full Text Available The loss of benefits after re-drying is one of the drawbacks of the seed priming technique. Different types of stresses have been used before re-drying to preserve the priming benefits. This process may be seen as promoting cross tolerance to increase the defense mechanisms that prevent loss of viability in seeds primed after drying. We tested the effect of some stresses to induce cross-tolerance and different drying conditions with the aim of maintaining priming benefits in melon seeds. The seeds were primed in an aerated KNO3 solution (0.35M, -1.7MPa, 25 °C, in the dark for six days. The primed seeds were then submitted to slow drying, fast drying, cold shock + slow drying, cold shock + fast drying, heat shock + slow drying, heat shock + fast drying, PEG + slow drying, PEG + fast drying, ABA + slow drying, ABA + fast drying and no drying (planted directly after priming. We evaluated antioxidant enzyme activities (SOD, CAT and APX, germinability, mean time of germination (MTG and mean rate of germination (MRG. A completely randomized design was used with three repetitions of 50 seeds in each treatment. Data were analyzed by ANOVA and means were compared by the Scott-Knott test (p ≤ 0.05. ABA increased SOD activity after drying and CAT activity was reduced by priming. APX activity was not observed. The stress submission prior to re-drying improved the MRG and reduced MTG. Therefore, the induction of the cross-tolerance mechanism could be effective to maintain priming benefits in melon seeds.

Conscious, but not unconscious, logo priming of brands and related words.

Science.gov (United States)

Brintazzoli, Gigliola; Soetens, Eric; Deroost, Natacha; Van den Bussche, Eva

2012-06-01

This study assessed whether real-life stimulus material can elicit conscious and unconscious priming. A typical masked priming paradigm was used, with brand logo primes. We used a rigorous method to assess participants' awareness of the subliminal information. Our results show that shortly presented and masked brand logos (e.g., logo of McDonald's) have the power to prime their brand names (e.g., "McDonald's") and, remarkably, words associated to the brand (e.g., "hamburger"). However, this only occurred when the logos could be categorized clearly above the consciousness threshold. Once the primes were presented close to the consciousness threshold, no subliminal influences on behavior were observed. Copyright © 2012 Elsevier Inc. All rights reserved.

On prime ideals and associated spectrum of BCK-algebras

International Nuclear Information System (INIS)

Ahsan, J.; Thaheem, A.B.; Deeba, E.Y.

1989-07-01

In this paper we study prime ideals and define the spectrum of a bounded commutative BCK-algebra. We also obtain a characterization of minimal prime (lattice) ideals of these algebras. (author). 8 refs, 4 tabs

C3-dependent mechanism of microglial priming relevant to multiple sclerosis

NARCIS (Netherlands)

Ramaglia, Valeria; Hughes, Timothy R.; Donev, Rossen M.; Ruseva, Marieta M.; Wu, Xiaobo; Huitinga, Inge; Baas, Frank; Neal, James W.; Morgan, B. Paul

2012-01-01

Microglial priming predisposes the brain to neurodegeneration and affects disease progression. The signal to switch from the quiescent to the primed state is unknown. We show that deleting the C3 convertase regulator complement receptor 1-related protein y (Crry) induces microglial priming. Mice

Inflammasome priming is similar for francisella species that differentially induce inflammasome activation.

Directory of Open Access Journals (Sweden)

Mohammed G Ghonime

Full Text Available Inflammasome activation is a two-step process where step one, priming, prepares the inflammasome for its subsequent activation, by step two. Classically step one can be induced by LPS priming followed by step two, high dose ATP. Furthermore, when IL-18 processing is used as the inflammasome readout, priming occurs before new protein synthesis. In this context, how intracellular pathogens such as Francisella activate the inflammasome is incompletely understood, particularly regarding the relative importance of priming versus activation steps. To better understand these events we compared Francisella strains that differ in virulence and ability to induce inflammasome activation for their relative effects on step one vs. step two. When using the rapid priming model, i.e., 30 min priming by live or heat killed Francisella strains (step 1, followed by ATP (step 2, we found no difference in IL-18 release, p20 caspase-1 release and ASC oligomerization between Francisella strains (F. novicida, F. holarctica -LVS and F. tularensis Schu S4. This priming is fast, independent of bacteria viability, internalization and phagosome escape, but requires TLR2-mediated ERK phosphorylation. In contrast to their efficient priming capacity, Francisella strains LVS and Schu S4 were impaired in inflammasome triggering compared to F. novicida. Thus, observed differences in inflammasome activation by F. novicida, LVS and Schu S4 depend not on differences in priming but rather on their propensity to trigger the primed inflammasome.

Priming involuntary autobiographical memories in the lab

OpenAIRE

Barzykowski, Krystian; Niedźwieńska, Agnieszka

2018-01-01

Involuntary autobiographical memories (IAMs) are recollections of personal past that frequently and spontaneously occur in daily life. Initial studies by Mace. Priming involuntary autobiographical memories. Showed that deliberately reminiscing about a certain lifetime period (e.g., high school) significantly increased the number of different IAMs from the same period in subsequent days, suggesting that priming may play a significant role in the retrieval of IAMs in everyday life. In the prese...

How visual working memory contents influence priming of visual attention.

Science.gov (United States)

Carlisle, Nancy B; Kristjánsson, Árni

2017-04-12

Recent evidence shows that when the contents of visual working memory overlap with targets and distractors in a pop-out search task, intertrial priming is inhibited (Kristjánsson, Sævarsson & Driver, Psychon Bull Rev 20(3):514-521, 2013, Experiment 2, Psychonomic Bulletin and Review). This may reflect an interesting interaction between implicit short-term memory-thought to underlie intertrial priming-and explicit visual working memory. Evidence from a non-pop-out search task suggests that it may specifically be holding distractors in visual working memory that disrupts intertrial priming (Cunningham & Egeth, Psychol Sci 27(4):476-485, 2016, Experiment 2, Psychological Science). We examined whether the inhibition of priming depends on whether feature values in visual working memory overlap with targets or distractors in the pop-out search, and we found that the inhibition of priming resulted from holding distractors in visual working memory. These results are consistent with separate mechanisms of target and distractor effects in intertrial priming, and support the notion that the impact of implicit short-term memory and explicit visual working memory can interact when each provides conflicting attentional signals.

A proof of the conjecture on the twin primes

Energy Technology Data Exchange (ETDEWEB)

Zuo-ling, Zhou [Department of Lingnan college, Sun Yat-sen University GuangZhou, GuangDong, 510275 (China)

2016-06-08

In this short note, we have proved the conjecture on twin primes using some thoughts of the set theory. Firstly, using the original sieve method and a new notation(concept)introduced by myself, the conjecture on twin primes is summed up as an elementary successive limit, afterwards we form a subsequence of positive integers,and using it,we prove that the successive limits are commutative and complete the proof of the conjecture on twin primes We also give a more straightforward proof of the conjecture.

Thermoacoustic contrast of prostate cancer due to heating by very high frequency irradiation

International Nuclear Information System (INIS)

Patch, S K; Hull, D; Thomas, M; Jacobsohn, K; See, WA; Griep, SK

2015-01-01

Applying the thermoacoustic (TA) effect to diagnostic imaging was first proposed in the 1980s. The object under test is irradiated by high-power pulses of electromagnetic energy, which heat tissue and cause thermal expansion. Outgoing TA pressure pulses are detected by ultrasound transducers and reconstructed to provide images of the object. The TA contrast mechanism is strongly dependent upon the frequency of the irradiating electromagnetic pulse. When very high frequency (VHF) electromagnetic irradiation is utilized, TA signal production is driven by ionic content. Prostatic fluids contain high levels of ionic metabolites, including citrate, zinc, calcium, and magnesium. Healthy prostate glands produce more ionic metabolites than diseased glands. VHF pulses are therefore expected to generate stronger TA signal in healthy prostate glands than in diseased glands. A benchtop system for performing ex vivo TA computed tomography with VHF energy is described and images are presented. The system utilizes irradiation pulses of 700 ns duration exceeding 20 kW power. Reconstructions frequently visualize anatomic landmarks such as the urethra and verumontanum. TA reconstructions from three freshly excised human prostate glands with little, moderate, and severe cancerous involvement are compared with histology. TA signal strength is negatively correlated with percent cancerous involvement in this small sample size. For the 45 regions of interest analyzed, a reconstruction value of 0.4 mV provides 100% sensitivity but only 29% specificity. This sample size is far too small to draw sweeping conclusions, but the results warrant a larger volume study including comparison of TA images to the gold standard, histology. (paper)

Aggressive priming online: Facebook adverts can prime aggressive cognitions

OpenAIRE

Buchanan, Tom

2015-01-01

Through the process of priming, incidental stimuli in our environments can influence our thoughts, feelings and behavior. This may be true of incidental stimuli in online environments, such as adverts on websites. Two experiments (N=325, N=331) showed that the mere presence of advertisements with violent content on a simulated Facebook page induced higher levels of aggression-related cognition in comparison to non-violent adverts (d=0.56 , d=0.71). In a subsequent word recognition task, parti...

Seed Priming to Overcome Salinity Stress in Persian Cultivars of Alfalfa (Medicago sativa L.

Directory of Open Access Journals (Sweden)

Ali SEPEHRI

2015-03-01

Full Text Available In order to investigate the effect of hydro-priming on seed germination with distilled water on germination of five Alfalfa cultivars under salinity stress, an experiment was conducted as a factorial experiment based on a completely randomized design with three replications. Seven levels of hydro-priming and salinity of NaCl including prime and non-salinity, prime and 50 mM salinity, prime and 100 mM salinity, prime and 150 mM salinity, prime and 200 mM salinity, prime and 250 mM salinity and without prime and salinity and five alfalfa varieties, including ‘Hamedani’, ‘Isfahani’, ‘Bami’, ‘Yazdi’ and ‘Ghareh Yonjeh’ were used. The results showed that the main effect of prime, salinity and cultivars and their interaction in all studied traits were significantly affected at the 5% probability level. Priming treatments in non-salinity of all cultivars were the highest. In all cultivars, final germination percentage, length and weight of radicle, plumule and seedling, germination rate and time, relative radicle elongation, vigor index and stress index, were significantly improved in response to priming in salinity levels of 50-200 mM, compared to control. Radicle produced higher length and weight than the plumule in hydro- priming and salinity treatments. ‘Hamedani’ cultivar in most of studied characteristics had a better response than others. The lowest response to salinity stress and priming was observed in ‘Yazdi’ cultivar.

The Design, Construction, and Experimental Evaluation of a Compact Thermoacoustic-Stirling Engine Generator for Use in a micro-CHP Appliance

Science.gov (United States)

Wilcox, Douglas A., Jr.

Micro combined heat and power or micro-CHP is the simultaneous generation of useful heat and electricity on a residential scale. The heat and electricity are produced at the point of use, avoiding the distribution losses associated with a centralized power plant. These appliances combine a conventional gas-fired condensing boiler with an electric power module capable of generating electricity from the heat of combustion. Currently, the leading power modules for micro-CHP appliances are free-piston Stirling engines (FPSEs) which can generate 1050 watts of electricity at a thermal-to-electric efficiency of 26%.[1] These external combustion engines have been under development for the last 25 years, with FPSE micro-CHP appliances only recently being introduced to the commercial market. Publications by developers assert unlimited service life and high efficiency, with low noise and emissions; but despite these claims, the actual reliability and cost of manufacturing has prevented their successful mass-market adoption. A Thermoacoustic-Stirling Engine Generator or TaSEG is one possible alternative to FPSE's. A TaSEG uses a thermoacoustic engine, or acoustic heat engine, which can efficiently convert high temperature heat into acoustic power while maintaining a simple design with fewer moving parts than traditional FPSE's. This simpler engine is coupled to an electrodynamic alternator capable of converting acoustic power into electricity. This thesis outlines the design, construction, and experimental evaluation of a TaSEG which is appropriate for integration with a gas burner inside of a residential micro- CHP appliance. The design methodology is discussed, focusing on how changes in the geometry affected the predicted performance. Details of its construction are given and the performance of the TaSEG is then outlined. The TaSEG can deliver 132 watts of electrical output power to an electric load with an overall measured thermal-to-electric (first law) efficiency of eta

Multi-targeted priming for genome-wide gene expression assays

Directory of Open Access Journals (Sweden)

Adomas Aleksandra B

2010-08-01

Full Text Available Abstract Background Complementary approaches to assaying global gene expression are needed to assess gene expression in regions that are poorly assayed by current methodologies. A key component of nearly all gene expression assays is the reverse transcription of transcribed sequences that has traditionally been performed by priming the poly-A tails on many of the transcribed genes in eukaryotes with oligo-dT, or by priming RNA indiscriminately with random hexamers. We designed an algorithm to find common sequence motifs that were present within most protein-coding genes of Saccharomyces cerevisiae and of Neurospora crassa, but that were not present within their ribosomal RNA or transfer RNA genes. We then experimentally tested whether degenerately priming these motifs with multi-targeted primers improved the accuracy and completeness of transcriptomic assays. Results We discovered two multi-targeted primers that would prime a preponderance of genes in the genomes of Saccharomyces cerevisiae and Neurospora crassa while avoiding priming ribosomal RNA or transfer RNA. Examining the response of Saccharomyces cerevisiae to nitrogen deficiency and profiling Neurospora crassa early sexual development, we demonstrated that using multi-targeted primers in reverse transcription led to superior performance of microarray profiling and next-generation RNA tag sequencing. Priming with multi-targeted primers in addition to oligo-dT resulted in higher sensitivity, a larger number of well-measured genes and greater power to detect differences in gene expression. Conclusions Our results provide the most complete and detailed expression profiles of the yeast nitrogen starvation response and N. crassa early sexual development to date. Furthermore, our multi-targeting priming methodology for genome-wide gene expression assays provides selective targeting of multiple sequences and counter-selection against undesirable sequences, facilitating a more complete and

Conceptual and non-conceptual repetition priming in category exemplar generation: Evidence from bilinguals.

Science.gov (United States)

Francis, Wendy S; Fernandez, Norma P; Bjork, Robert A

2010-10-01

One measure of conceptual implicit memory is repetition priming in the generation of exemplars from a semantic category, but does such priming transfer across languages? That is, do the overlapping conceptual representations for translation equivalents provide a sufficient basis for such priming? In Experiment 1 (N=96) participants carried out a deep encoding task, and priming between languages was statistically reliable, but attenuated, relative to within-language priming. Experiment 2 (N=96) replicated the findings of Experiment 1 and assessed the contributions of conceptual and non-conceptual processes using a levels-of-processing manipulation. Words that underwent shallow encoding exhibited within-language, but not between-language, priming. Priming in shallow conditions cannot therefore be explained by incidental activation of the concept. Instead, part of the within-language priming effect, even under deep-encoding conditions, is due to increased availability of language-specific lemmas or phonological word forms.

JPRS Report, Soviet Union, International Affairs

Science.gov (United States)

1989-09-11

8217 pens can fire further than guns. That means that I who ’charge’ these guns must keep my powder dry." That is what Gerasimov is all about. You expect... GUM and TsUM. On the desk Professor Marshall Goldman, deputy director of the Russian center, we saw even a whole tank column and prime movers with...intensification of direct investments in the present or the foreseeable future. In addition, no one can guar - antee that the amount of profit

Performance requirements for locomotive braking systems

CSIR Research Space (South Africa)

Vermaak, P

2000-02-01

Full Text Available operated “Neutral Brake”. This brake may become active immediately or after a certain time delay when the controller is placed in the neutral position or moved into the neutral position by the “dead-man’s device”. Because this brake will interfere... in testing emergency brake systems due to the inherent braking action of the service brakes and/or locomotive controllers; • Potential problems limitations to braking effort associated with the prime movers and/or hydraulic systems on hydrostatically...

Physiological and biochemical mechanisms of seed priming-induced chilling tolerance in rice cultivars

Directory of Open Access Journals (Sweden)

Saddam eHussain

2016-02-01

Full Text Available Rice belongs to tropical and subtropical environments and is extremely sensitive to chilling stress particularly during emergence and early stages of seedling development. Seed priming can be a good approach to enhance rice germination and stand establishment under chilling stress. The present study examined the role of different seed priming techniques viz., hydropriming, osmopriming, redox priming, chemical priming, and hormonal priming, in enhancing the chilling tolerance in rice. The most effective reagents and their pre-optimized concentrations based on preliminary experiments were used in this study. Two different rice cultivars were sown under chilling stress (18˚C and normal temperatures (28˚C in separate growth chambers. A non-primed control treatment was also maintained for comparison. Chilling stress caused erratic and delayed germination, poor seedling growth, reduced starch metabolism and lower respiration rate, while higher lipid peroxidation and hydrogen peroxide accumulation in rice seedlings of both cultivars. Nevertheless, all the seed priming treatments effectively alleviated the negative effects of chilling stress. In addition, seed priming treatments triggered the activities of superoxide dismutase, peroxidase, and catalase, and enhanced the accumulations of glutathione and free proline in rice seedlings, which suggests that these measures help prevent the rice seedlings from chilling induced oxidative stress. Chemical priming with selenium and hormonal priming with salicylic acid remained more effective treatments for both rice cultivars under chilling stress than all other priming treatments. The better performance and greater tolerance of primed rice seedlings was associated with enhanced starch metabolism, high respiration rate, lower lipid peroxidation, and strong antioxidative defense system under chilling stress.

On the last digits of consecutive primes

OpenAIRE

Holt, Fred B.

2016-01-01

Recently Oliver and Soundararajan made conjectures based on computational enumerations about the frequency of occurrence of pairs of last digits for consecutive primes. By studying Eratosthenes sieve, we have identified discrete dynamic systems that exactly model the populations of gaps across stages of Eratosthenes sieve. Our models provide some insight into the observed biases in the occurrences of last digits in consecutive primes, and the models suggest that the biases will ultimately be ...

A note on the countable union of prime submodules

Directory of Open Access Journals (Sweden)

M. R. Pournaki

2001-01-01

Full Text Available Let M be a finitely-generated module over a Noetherian ring R. Suppose is an ideal of R and let N=M and =Ann(M/N. If ⫅J(R, M is complete with respect to the -adic topology, {Pi}i≥1 is a countable family of prime submodules of M, and x∈M, then x+N⫅∪i≥1Pi implies that x+N⫅Pj for some i≥1. This extends a theorem of Sharp and Vámos concerning prime ideals to prime submodules.

Physiological quality and seed respiration of primed Jatropha curcas seeds

Directory of Open Access Journals (Sweden)

Micheli Angelica Horbach

2017-11-01

Full Text Available ABSTRACT Seed deterioration is a natural and irreversible process. Nevertheless, seed priming with water and antioxidants can minimize oxidative damage in oilseeds, resulting in attenuation of seed deterioration. The objective of this assay was to evaluate seed priming on respiratory activity of Jatropha curcas submitted to accelerated aging. Seeds from two provenances (Janauba and Pedro J. Caballero were submitted to three priming treatments (control, immersion in deionized water, and with 750 µmol L-1 of ascorbic acid and treated for accelerated aging at 41 °C for 72 h. The results showed that the priming of J. curcas seeds promoted tolerance to accelerated aging. Primed seeds, with ascorbic acid from Janauba and deionized water from Pedro J. Caballero, resulted in a higher percentage of normal seedlings, and increased germination speed index and seed respiration. The decline of physiological quality of J. curcas seeds after accelerated aging is directly associated with a reduction in respiratory activity that is related to seed moisture content.

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

Science.gov (United States)

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

The structure of semantic person memory: evidence from semantic priming in person recognition.

Science.gov (United States)

Wiese, Holger

2011-11-01

This paper reviews research on the structure of semantic person memory as examined with semantic priming. In this experimental paradigm, a familiarity decision on a target face or written name is usually faster when it is preceded by a related as compared to an unrelated prime. This effect has been shown to be relatively short lived and susceptible to interfering items. Moreover, semantic priming can cross stimulus domains, such that a written name can prime a target face and vice versa. However, it remains controversial whether representations of people are stored in associative networks based on co-occurrence, or in more abstract semantic categories. In line with prominent cognitive models of face recognition, which explain semantic priming by shared semantic information between prime and target, recent research demonstrated that priming could be obtained from purely categorically related, non-associated prime/target pairs. Although strategic processes, such as expectancy and retrospective matching likely contribute, there is also evidence for a non-strategic contribution to priming, presumably related to spreading activation. Finally, a semantic priming effect has been demonstrated in the N400 event-related potential (ERP) component, which may reflect facilitated access to semantic information. It is concluded that categorical relatedness is one organizing principle of semantic person memory. ©2011 The British Psychological Society.

Thioredoxin priming prolongs lung allograft survival by promoting immune tolerance.

Directory of Open Access Journals (Sweden)

Hanbo Hu

Full Text Available Tolerance to allograft antigen is the major challenge and final goal of transplant medicine. Our previous study demonstrated that thioredoxin-1 (Trx priming of donor lung significantly protected allogeneic lung graft. To determine whether Trx priming of donor lung inhibits allograft rejection, extends allograft survival and induces immune tolerance, orthotopic left lung transplantation was performed from Lewis to Sprague-Dawley rats without immunosuppression. Donor lungs were primed with Trx at 4°C for 4 hr prior to transplantation. After up to 37 days post-transplantation, allograft lung morphology, recipient T cell and humoral alloantigen-specific immune responses were examined. We found that Trx-primed lungs exhibited much reduced acute rejection and associated lung injuries resulting in loss of graft functional area at 5-37 days post-transplant in contrast to the control groups. CD4+ T cells from the recipients with Trx-primed grafts responded to the stimulation of dendritic cells (DCs of donor origin, in contrast to DCs from the third party, with significantly reduced proliferation. Consistent with above findings, we observed that CD4+Foxp3+ regulatory T cells in spleen cells from the recipients with Trx-primed grafts were significantly increased compared to controls, and CD4+ T cells from the recipients with Trx-primed grafts produced much higher levels of immunosuppressive cytokine, IL-10 when stimulated with allogeneic donor DCs. In addition, humoral immune tolerance was also induced as there was no significant increase levels of serum antibodies against donor antigens in Trx-lung recipients when re-challenged with allogeneic donor antigens. Our results demonstrate that one-time Trx-priming of donor lung grafts prior to transplantation significantly prolongs the survival of the grafts through inducing or promoting cellular and humoral alloantigen-specific immune tolerance, which might be associated with the induction of

Priming T-cell responses with recombinant measles vaccine vector in a heterologous prime-boost setting in non-human primates.

Science.gov (United States)

Bolton, Diane L; Santra, Sampa; Swett-Tapia, Cindy; Custers, Jerome; Song, Kaimei; Balachandran, Harikrishnan; Mach, Linh; Naim, Hussein; Kozlowski, Pamela A; Lifton, Michelle; Goudsmit, Jaap; Letvin, Norman; Roederer, Mario; Radošević, Katarina

2012-09-07

Licensed live attenuated virus vaccines capable of expressing transgenes from other pathogens have the potential to reduce the number of childhood immunizations by eliciting robust immunity to multiple pathogens simultaneously. Recombinant attenuated measles virus (rMV) derived from the Edmonston Zagreb vaccine strain was engineered to express simian immunodeficiency virus (SIV) Gag protein for the purpose of evaluating the immunogenicity of rMV as a vaccine vector in rhesus macaques. rMV-Gag immunization alone elicited robust measles-specific humoral and cellular responses, but failed to elicit transgene (Gag)-specific immune responses, following aerosol or intratracheal/intramuscular delivery. However, when administered as a priming vaccine to a heterologous boost with recombinant adenovirus serotype 5 expressing the same transgene, rMV-Gag significantly enhanced Gag-specific T lymphocyte responses following rAd5 immunization. Gag-specific humoral responses were not enhanced, however, which may be due to either the transgene or the vector. Cellular response priming by rMV against the transgene was highly effective even when using a suboptimal dose of rAd5 for the boost. These data demonstrate feasibility of using rMV as a priming component of heterologous prime-boost vaccine regimens for pathogens requiring strong cellular responses. Copyright © 2012 Elsevier Ltd. All rights reserved.

Priming with Rocuronium to Accelerate the Onset Time of Cisatracurium During Intubation

Directory of Open Access Journals (Sweden)

Shih-Pin Lin

2009-01-01

Conclusion: Priming with rocuronium or cisatracurium for 3 minutes significantly accelerated the onset of cisatracurium. Priming with rocuronium for 3 minutes improved the onset time of cisatracurium even more than priming with cisatracurium itself.

The role of selective attention in perceptual and affective priming

Science.gov (United States)

Stone, M.; Ladd, S. L.; Gabrieli, J. D.

2000-01-01

Two kinds of perceptual priming (word identification and word fragment completion), as well as preference priming (that may rely on special affective mechanisms) were examined after participants either read or named the colors of words and nonwords at study. Participants named the colors of words more slowly than the colors of nonwords, indicating that lexical processing of the words occurred at study. Nonetheless, priming on all three tests was lower after color naming than after reading, despite evidence of lexical processing during color naming shown by slower responses to words than to nonwords. These results indicate that selective attention to (rather than the mere processing of) letter string identity at study is important for subsequent repetition priming.

Fall Colors, 2001-02: Prime Time Diversity Report.

Science.gov (United States)

Parker, McCrae A.; Miller, Patti; Espejo, Eileen; Grossman-Swenson, Sarah

Television is an integral part of American culture, and has the ability to play a major role in shaping belief systems, particularly for the youngest and most impressionable viewers. This study is the third annual study of diversity of characters in prime time television programming. The study examined the first two episodes of each prime time…

Sulforaphane Modifies Histone H3, Unpacks Chromatin, and Primes Defense.

Science.gov (United States)

Schillheim, Britta; Jansen, Irina; Baum, Stephani; Beesley, Alexander; Bolm, Carsten; Conrath, Uwe

2018-03-01

Modern crop production calls for agrochemicals that prime plants for enhanced defense. Reliable test systems for spotting priming-inducing chemistry, however, are rare. We developed an assay for the high-throughput search for compounds that prime microbial pattern-induced secretion of antimicrobial furanocoumarins (phytoalexins) in cultured parsley cells. The screen produced 1-isothiocyanato-4-methylsulfinylbutane (sulforaphane; SFN), a secondary metabolite in many crucifers, as a novel defense priming compound. While elucidating SFN's mode of action in defense priming, we found that in Arabidopsis ( Arabidopsis thaliana ) the isothiocyanate provokes covalent modification (K4me3, K9ac) of histone H3 in the promoter and promoter-proximal region of defense genes WRKY6 and PDF1 2 , but not PR1 SFN-triggered H3K4me3 and H3K9ac coincide with chromatin unpacking in the WRKY6 and PDF1 2 regulatory regions, primed WRKY6 expression, unprimed PDF1 2 activation, and reduced susceptibility to downy mildew disease ( Hyaloperonospora arabidopsidis ). Because SFN also directly inhibits H arabidopsidis and other plant pathogens, the isothiocyanate is promising for the development of a plant protectant with a dual mode of action. © 2018 American Society of Plant Biologists. All Rights Reserved.

An Intersensory Interaction Account of Priming Effects-and Their Absence.

Science.gov (United States)

Klatzky, Roberta L; Creswell, J David

2014-01-01

Psychological researchers have found that exposures to stimuli (primes) can subsequently influence people's behavior by pathways that would seem to be quite remote. For example, people exposed to words associated with older adults may walk more slowly. Recently priming studies, particularly those showing dramatic effects on social behavior, have been under scrutiny because of the unreliability of empirical results. In this article, we shed light on the issue by describing a general model of intersensory interaction, in which two or more sources of information provide an estimate or "bid" on a property of the world, with the perceptual outcome being a weighted combination of the bids. When it is extended by adding bids that stem from memory or inference, the model identifies systematic factors that might undermine priming, including random variation in estimates, contextual influences on memory retrieval and inference, competition among information sources, and cognitive control. These factors are not only explanatory but are predictive of when priming effects can be expected. Our hope is that by promoting the understanding of underlying processes that may explain how primes can influence behavior, the bidding model and the general approach that it represents offer novel insights into the hotly debated area of priming research. © The Author(s) 2013.

Brand priming effect on consumers’ financial risk taking behavior

Directory of Open Access Journals (Sweden)

Danielle Mantovani

Full Text Available Abstract Taking the perspective of brand priming theory, this study proposes that brands associated with an audacious personality trait may influence consumers to be take more risks in making subsequent decisions. Two experiments, run in sport brands contexts, showed that individuals exposed to brands with high (vs. low audacity traits demonstrated a higher rate of risk taking in financial decisions. The studies also showed that this effect is moderated by individuals’ experience with the financial market. This moderation suggests that there was an activation of a goal not just semantic activation, but through the brand priming. This research provides insights into how today's consumers deal with brand priming effects in risky choice settings. From a managerial perspective, it can help managers to understand the likely effects of brand priming on behavior and better predict the probability of risk aversion or risk seeking outcomes.

Is Semantic Priming (Ir)rational? Insights from the Speeded Word Fragment Completion Task

Science.gov (United States)

Heyman, Tom; Hutchison, Keith A.; Storms, Gert

2016-01-01

Semantic priming, the phenomenon that a target is recognized faster if it is preceded by a semantically related prime, is a well-established effect. However, the mechanisms producing semantic priming are subject of debate. Several theories assume that the underlying processes are controllable and tuned to prime utility. In contrast, purely…

Affective priming of emotional pictures in parafoveal vision: left visual field advantage.

Science.gov (United States)

Calvo, Manuel G; Avero, Pedro

2008-03-01

This study investigated whether stimulus affective content can be extracted from visual scenes when these appear in parafoveal locations of the visual field and are foveally masked, and whether there is lateralization involved. Parafoveal prime pleasant or unpleasant scenes were presented for 150 msec 2.5 degrees away from fixation and were followed by a foveal probe scene that was either congruent or incongruent in emotional valence with the prime. Participants responded whether the probe was emotionally positive or negative. Affective priming was demonstrated by shorter response latencies for congruent than for incongruent prime-probe pairs. This effect occurred when the prime was presented in the left visual field at a 300-msec prime-probe stimulus onset asynchrony, even when the prime and the probe were different in physical appearance and semantic category. This result reveals that the affective significance of emotional stimuli can be assessed early through covert attention mechanisms, in the absence of overt eye fixations on the stimuli, and suggests that right-hemisphere dominance is involved.

Verbal priming and taste sensitivity make moral transgressions gross.

Science.gov (United States)

Herz, Rachel S

2014-02-01

The aims of the present study were to assess whether: (a) visceral and moral disgust share a common oral origin (taste); (b) moral transgressions that are also viscerally involving are evaluated accordingly as a function of individual differences in taste sensitivity; (c) verbal priming interacts with taste sensitivity to alter how disgust is experienced in moral transgressions; and (d) whether gender moderates these effects. Standard tests of disgust sensitivity, a questionnaire developed for this research assessing different types of moral transgressions (nonvisceral, implied-visceral, visceral) with the terms "angry" and "grossed-out," and a taste sensitivity test of 6-n-propylthiouracil (PROP) were administered to 102 participants. Results confirmed past findings that the more sensitive to PROP a participant was the more disgusted they were by visceral, but not moral, disgust elicitors. Importantly, the findings newly revealed that taste sensitivity had no bearing on evaluations of moral transgressions, regardless of their visceral nature, when "angry" was the emotion primed. However, when "grossed-out" was primed for evaluating moral violations, the more intense PROP tasted to a participant the more "grossed-out" they were by all transgressions. Women were generally more disgust sensitive and morally condemning than men, but disgust test, transgression type, and priming scale modulated these effects. The present findings support the proposition that moral and visceral disgust do not share a common oral origin, but show that linguistic priming can transform a moral transgression into a viscerally repulsive event and that susceptibility to this priming varies as a function of an individual's sensitivity to the origins of visceral disgust-bitter taste.

The Shortlist Method for fast computation of the Earth Mover's Distance and finding optimal solutions to transportation problems.

Science.gov (United States)

Gottschlich, Carsten; Schuhmacher, Dominic

2014-01-01

Finding solutions to the classical transportation problem is of great importance, since this optimization problem arises in many engineering and computer science applications. Especially the Earth Mover's Distance is used in a plethora of applications ranging from content-based image retrieval, shape matching, fingerprint recognition, object tracking and phishing web page detection to computing color differences in linguistics and biology. Our starting point is the well-known revised simplex algorithm, which iteratively improves a feasible solution to optimality. The Shortlist Method that we propose substantially reduces the number of candidates inspected for improving the solution, while at the same time balancing the number of pivots required. Tests on simulated benchmarks demonstrate a considerable reduction in computation time for the new method as compared to the usual revised simplex algorithm implemented with state-of-the-art initialization and pivot strategies. As a consequence, the Shortlist Method facilitates the computation of large scale transportation problems in viable time. In addition we describe a novel method for finding an initial feasible solution which we coin Modified Russell's Method.

Equivalence Testing of Complex Particle Size Distribution Profiles Based on Earth Mover's Distance.

Science.gov (United States)

Hu, Meng; Jiang, Xiaohui; Absar, Mohammad; Choi, Stephanie; Kozak, Darby; Shen, Meiyu; Weng, Yu-Ting; Zhao, Liang; Lionberger, Robert

2018-04-12

Particle size distribution (PSD) is an important property of particulates in drug products. In the evaluation of generic drug products formulated as suspensions, emulsions, and liposomes, the PSD comparisons between a test product and the branded product can provide useful information regarding in vitro and in vivo performance. Historically, the FDA has recommended the population bioequivalence (PBE) statistical approach to compare the PSD descriptors D50 and SPAN from test and reference products to support product equivalence. In this study, the earth mover's distance (EMD) is proposed as a new metric for comparing PSD particularly when the PSD profile exhibits complex distribution (e.g., multiple peaks) that is not accurately described by the D50 and SPAN descriptor. EMD is a statistical metric that measures the discrepancy (distance) between size distribution profiles without a prior assumption of the distribution. PBE is then adopted to perform statistical test to establish equivalence based on the calculated EMD distances. Simulations show that proposed EMD-based approach is effective in comparing test and reference profiles for equivalence testing and is superior compared to commonly used distance measures, e.g., Euclidean and Kolmogorov-Smirnov distances. The proposed approach was demonstrated by evaluating equivalence of cyclosporine ophthalmic emulsion PSDs that were manufactured under different conditions. Our results show that proposed approach can effectively pass an equivalent product (e.g., reference product against itself) and reject an inequivalent product (e.g., reference product against negative control), thus suggesting its usefulness in supporting bioequivalence determination of a test product to the reference product which both possess multimodal PSDs.

Is semantic priming due to association strength or feature overlap? A microanalytic review.

Science.gov (United States)

Hutchison, Keith A

2003-12-01

In a recent meta-analysis, Lucas (2000) concluded that there is strong evidence of an overall pure semantic priming effect but no evidence of priming based purely on association. In the present review, I critically examine the individual studies claiming evidence of featural and associative relations in semantic memory. The most important conclusion is that automatic priming appears to be due to both association strength and feature overlap. Mediated associates provide the strongest evidence of automatic associative priming, whereas functional associates, synonyms, and antonyms instead support priming based on feature overlap. In contrast, automatic priming does not occur for category coordinates or perceptually similar items, at least when presented in the visual modality. The status of other relations, such as collocates, episodic relatives, and script relations, is unclear and requires further experimentation. Implications for current models of semantic representation and priming are discussed.

On the Prime Ideals of C [0, 1

Indian Academy of Sciences (India)

It is well known that the set C[0, 1] of real-valuedcontinuous functions on the closed interval [0, 1]has a natural ring structure. Its maximal idealsare known to be points. Here we show thatalthough there exist prime ideals which are notmaximal, the zero set is again a singleton. In particular,each prime ideal is contained in a ...

The effects of alcohol expectancy priming on group bonding.

Science.gov (United States)

Moltisanti, Allison J; Below, Maureen C; Brandon, Karen O; Goldman, Mark S

2013-12-01

According to alcohol expectancy theory, drinking-related information is stored in memory and, when cue activated, influences alcohol-related behavior. Priming of alcohol cues and expectancies has been shown to elicit both drinking and nonconsumptive behavior associated with alcohol consumption, such as willingness to meet with a stranger and aggression. These social influence effects have been shown to be moderated by individual differences in alcohol expectancies. In the present study, we tested whether an alcohol prime would facilitate social group bonding even in the absence of consumption, and whether such group bonding would be moderated by individually held social expectancies. One hundred twenty undergraduates (75% female) completed an alcohol expectancy measure prior to participation. Participants were primed with either alcohol or neutral beverage words and completed a collaborative group activity followed by questionnaires measuring perceived group cohesion. Several interactions were found between condition and expectancy reflecting that those in the alcohol prime condition with higher social alcohol expectancies reported greater cohesion on task-related, but not emotion-related, group measures. These findings underscore the complexity of the impact of expectancy and social behavior on drinking: the priming of alcohol expectancies may activate aspects of pro-social behavior, which may influence drinking, which in turn may feedback to positively reinforce social expectancies.

Self-Construal Priming Modulates Self-Evaluation under Social Threat

Directory of Open Access Journals (Sweden)

Tianyang Zhang

2017-10-01

Full Text Available Previous studies have shown that Westerners evaluate themselves in an especially flattering way when faced with a social-evaluative threat. The current study first investigated whether East Asians also have a similar pattern by recruiting Chinese participants and using social-evaluative threat manipulations in which participants perform self-evaluation tasks while adopting different social-evaluative feedbacks (Experiment 1. Then further examined whether the different response patterns can be modulated by different types of self-construal by using social-evaluative threat manipulations in conjunction with a self-construal priming task (Experiment 2. The results showed that, as opposed to Westerners' pattern, Chinese participants rated themselves as having significantly greater above-average effect only when faced with the nonthreatening feedback but not the social-evaluative threat. More importantly, we found that self-construal modulated the self-evaluation under social-evaluative threat: following independent self-construal priming, participants tended to show a greater above-average effect when faced with a social-evaluative threat. However, this pattern in conjunction with a social threat disappeared after participants received interdependent self-construal priming or neutral priming. These findings suggest that the effects of social-evaluative threat on self-evaluation are not culturally universal and is strongly modulated by self-construal priming.

Repetition-priming effect: a cognitive task for the definition of a clinical assessment

Directory of Open Access Journals (Sweden)

Silvia Pagani

2014-04-01

Full Text Available This research aims to study how semantic priming words can influence behavioral measures (RTs, accuracy, to develop an experimental paradigm to differentiate visual neglect and hemianopia. 69 experimental subjects were involved in four experiments. In each experiment target words were preceded by word primes semantically related, neutral or unrelated to the target. The four experiments differed in terms of: number of prime, prime duration and distance between PC monitor and subject. In general, related primes should improve facilitatory effect in target recognition more than unrelated primes, reducing RTs and increasing response accuracy. After repeated ANOVA analysis applied to each experiment and paired comparisons, it is possible to point out that single related primes, shown for 150 ms, greatly improve response behavior in terms of RTs reduction. For future applications to the clinical field, we assume that neglect patients should be facilitated in these specific experimental conditions, due to implicit contralesional prime processing. On the contrary, hemianopics should nowise be facilitated, due to visual field deficit.

Secretory Vesicle Priming by CAPS Is Independent of Its SNARE-Binding MUN Domain

Directory of Open Access Journals (Sweden)

Cuc Quynh Nguyen Truong

2014-11-01

Full Text Available Priming of secretory vesicles is a prerequisite for their Ca2+-dependent fusion with the plasma membrane. The key vesicle priming proteins, Munc13s and CAPSs, are thought to mediate vesicle priming by regulating the conformation of the t-SNARE syntaxin, thereby facilitating SNARE complex assembly. Munc13s execute their priming function through their MUN domain. Given that the MUN domain of Ca2+-dependent activator protein for secretion (CAPS also binds syntaxin, it was assumed that CAPSs prime vesicles through the same mechanism as Munc13s. We studied naturally occurring splice variants of CAPS2 in CAPS1/CAPS2-deficient cells and found that CAPS2 primes vesicles independently of its MUN domain. Instead, the pleckstrin homology domain of CAPS2 seemingly is essential for its priming function. Our findings indicate a priming mode for secretory vesicles. This process apparently requires membrane phospholipids, does not involve the binding or direct conformational regulation of syntaxin by MUN domains of CAPSs, and is therefore not redundant with Munc13 action.

Behavioral priming: it's all in the mind, but whose mind?

Directory of Open Access Journals (Sweden)

Stéphane Doyen

Full Text Available The perspective that behavior is often driven by unconscious determinants has become widespread in social psychology. Bargh, Chen, and Burrows' (1996 famous study, in which participants unwittingly exposed to the stereotype of age walked slower when exiting the laboratory, was instrumental in defining this perspective. Here, we present two experiments aimed at replicating the original study. Despite the use of automated timing methods and a larger sample, our first experiment failed to show priming. Our second experiment was aimed at manipulating the beliefs of the experimenters: Half were led to think that participants would walk slower when primed congruently, and the other half was led to expect the opposite. Strikingly, we obtained a walking speed effect, but only when experimenters believed participants would indeed walk slower. This suggests that both priming and experimenters' expectations are instrumental in explaining the walking speed effect. Further, debriefing was suggestive of awareness of the primes. We conclude that unconscious behavioral priming is real, while real, involves mechanisms different from those typically assumed to cause the effect.

The Influence of Working Memory Load on Semantic Priming

Science.gov (United States)

Heyman, Tom; Van Rensbergen, Bram; Storms, Gert; Hutchison, Keith A.; De Deyne, Simon

2015-01-01

The present research examines the nature of the different processes that have been proposed to underlie semantic priming. Specifically, it has been argued that priming arises as a result of "automatic target activation" and/or the use of strategies like prospective "expectancy generation" and "retrospective semantic…

76 FR 80907 - TRICARE Prime Urgent Care Demonstration Project

Science.gov (United States)

2011-12-27

... care including minor illness or injury for Active Duty Family Members enrolled in TRICARE Prime or.... Current data indicates that the ADFMs frequently need urgent care while traveling to new duty stations for... DEPARTMENT OF DEFENSE Office of the Secretary TRICARE Prime Urgent Care Demonstration Project...

Homophonic and semantic priming of Japanese Kanji words: a time course study.